CUBIT mesh generation environment. Volume 1: Users manual
Energy Technology Data Exchange (ETDEWEB)
Blacker, T.D.; Bohnhoff, W.J.; Edwards, T.L. [and others
1994-05-01
The CUBIT mesh generation environment is a two- and three-dimensional finite element mesh generation tool which is being developed to pursue the goal of robust and unattended mesh generation--effectively automating the generation of quadrilateral and hexahedral elements. It is a solid-modeler based preprocessor that meshes volume and surface solid models for finite element analysis. A combination of techniques including paving, mapping, sweeping, and various other algorithms being developed are available for discretizing the geometry into a finite element mesh. CUBIT also features boundary layer meshing specifically designed for fluid flow problems. Boundary conditions can be applied to the mesh through the geometry and appropriate files for analysis generated. CUBIT is specifically designed to reduce the time required to create all-quadrilateral and all-hexahedral meshes. This manual is designed to serve as a reference and guide to creating finite element models in the CUBIT environment.
Streaming Compression of Tetrahedral Volume Meshes
Energy Technology Data Exchange (ETDEWEB)
Isenburg, M; Lindstrom, P; Gumhold, S; Shewchuk, J
2005-11-21
Geometry processing algorithms have traditionally assumed that the input data is entirely in main memory and available for random access. This assumption does not scale to large data sets, as exhausting the physical memory typically leads to IO-inefficient thrashing. Recent works advocate processing geometry in a 'streaming' manner, where computation and output begin as soon as possible. Streaming is suitable for tasks that require only local neighbor information and batch process an entire data set. We describe a streaming compression scheme for tetrahedral volume meshes that encodes vertices and tetrahedra in the order they are written. To keep the memory footprint low, the compressor is informed when vertices are referenced for the last time (i.e. are finalized). The compression achieved depends on how coherent the input order is and how many tetrahedra are buffered for local reordering. For reasonably coherent orderings and a buffer of 10,000 tetrahedra, we achieve compression rates that are only 25 to 40 percent above the state-of-the-art, while requiring drastically less memory resources and less than half the processing time.
Optimization-based mesh correction with volume and convexity constraints
D'Elia, Marta; Ridzal, Denis; Peterson, Kara J.; Bochev, Pavel; Shashkov, Mikhail
2016-05-01
We consider the problem of finding a mesh such that 1) it is the closest, with respect to a suitable metric, to a given source mesh having the same connectivity, and 2) the volumes of its cells match a set of prescribed positive values that are not necessarily equal to the cell volumes in the source mesh. This volume correction problem arises in important simulation contexts, such as satisfying a discrete geometric conservation law and solving transport equations by incremental remapping or similar semi-Lagrangian transport schemes. In this paper we formulate volume correction as a constrained optimization problem in which the distance to the source mesh defines an optimization objective, while the prescribed cell volumes, mesh validity and/or cell convexity specify the constraints. We solve this problem numerically using a sequential quadratic programming (SQP) method whose performance scales with the mesh size. To achieve scalable performance we develop a specialized multigrid-based preconditioner for optimality systems that arise in the application of the SQP method to the volume correction problem. Numerical examples illustrate the importance of volume correction, and showcase the accuracy, robustness and scalability of our approach.
Spectral multiplexing using stacked volume-phase holographic gratings - I
Zanutta, A.; Landoni, M.; Riva, M.; Bianco, A.
2017-08-01
Many focal-reducer spectrographs, currently available at state-of-the-art telescopes facilities, would benefit from a simple refurbishing that could increase both the resolution and spectral range in order to cope with the progressively challenging scientific requirements, but, in order to make this update appealing, it should minimize the changes in the existing structure of the instrument. In the past, many authors proposed solutions based on stacking subsequently layers of dispersive elements and recording multiple spectra in one shot (multiplexing). Although this idea is promising, it brings several drawbacks and complexities that prevent the straightforward integration of such a device in a spectrograph. Fortunately, nowadays, the situation has changed dramatically, thanks to the successful experience achieved through photopolymeric holographic films, used to fabricate common volume-phase holographic gratings (VPHGs). Thanks to the various advantages made available by these materials in this context, we propose an innovative solution to design a stacked multiplexed VPHG that is able to secure efficiently different spectra in a single shot. This allows us to increase resolution and spectral range enabling astronomers to greatly economize their awarded time at the telescope. In this paper, we demonstrate the applicability of our solution, both in terms of expected performance and feasibility, supposing the upgrade of the Gran Telescopio CANARIAS (GTC) Optical System for Imaging and low-Intermediate-Resolution Integrated Spectroscopy (OSIRIS).
Design of Finite Element Tools for Coupled Surface and Volume Meshes
Institute of Scientific and Technical Information of China (English)
Daniel K(o)ster; Oliver Kriessl; Kunibert G. Siebert
2008-01-01
Many problems with underlying variational structure involve a coupling of volume with surface effects. A straight-forward approach in a finite element discretization is to make use of the surface triangulation that is naturally induced by the volume triangulation. In an adaptive method one wants to facilitate "matching" local mesh modifications, i.e., local refinement and/or coarsening, of volume and surface mesh with standard tools such that the surface grid is always induced by the volume grid. We describe the concepts behind this approach for bisectional refinement and describe new tools incorporated in the finite element toolbox ALBERTA. We also present several important applications of the mesh coupling.
Maric, Tomislav; Bothe, Dieter
2013-01-01
A new parallelized unsplit geometrical Volume of Fluid (VoF) algorithm with support for arbitrary unstructured meshes and dynamic local Adaptive Mesh Refinement (AMR), as well as for two and three dimensional computation is developed. The geometrical VoF algorithm supports arbitrary unstructured meshes in order to enable computations involving flow domains of arbitrary geometrical complexity. The implementation of the method is done within the framework of the OpenFOAM library for Computational Continuum Mechanics (CCM) using the C++ programming language with modern policy based design for high program code modularity. The development of the geometrical VoF algorithm significantly extends the method base of the OpenFOAM library by geometrical volumetric flux computation for two-phase flow simulations. For the volume fraction advection, a novel unsplit geometrical algorithm is developed, which inherently sustains volume conservation utilizing unique Lagrangian discrete trajectories located in the mesh points. ...
Combining 3d Volume and Mesh Models for Representing Complicated Heritage Buildings
Tsai, F.; Chang, H.; Lin, Y.-W.
2017-08-01
This study developed a simple but effective strategy to combine 3D volume and mesh models for representing complicated heritage buildings and structures. The idea is to seamlessly integrate 3D parametric or polyhedral models and mesh-based digital surfaces to generate a hybrid 3D model that can take advantages of both modeling methods. The proposed hybrid model generation framework is separated into three phases. Firstly, after acquiring or generating 3D point clouds of the target, these 3D points are partitioned into different groups. Secondly, a parametric or polyhedral model of each group is generated based on plane and surface fitting algorithms to represent the basic structure of that region. A "bare-bones" model of the target can subsequently be constructed by connecting all 3D volume element models. In the third phase, the constructed bare-bones model is used as a mask to remove points enclosed by the bare-bones model from the original point clouds. The remaining points are then connected to form 3D surface mesh patches. The boundary points of each surface patch are identified and these boundary points are projected onto the surfaces of the bare-bones model. Finally, new meshes are created to connect the projected points and original mesh boundaries to integrate the mesh surfaces with the 3D volume model. The proposed method was applied to an open-source point cloud data set and point clouds of a local historical structure. Preliminary results indicated that the reconstructed hybrid models using the proposed method can retain both fundamental 3D volume characteristics and accurate geometric appearance with fine details. The reconstructed hybrid models can also be used to represent targets in different levels of detail according to user and system requirements in different applications.
Relativistic Vlasov-Maxwell modelling using finite volumes and adaptive mesh refinement
Wettervik, Benjamin Svedung; Siminos, Evangelos; Fülöp, Tünde
2016-01-01
The dynamics of collisionless plasmas can be modelled by the Vlasov-Maxwell system of equations. An Eulerian approach is needed to accurately describe processes that are governed by high energy tails in the distribution function, but is of limited efficiency for high dimensional problems. The use of an adaptive mesh can reduce the scaling of the computational cost with the dimension of the problem. Here, we present a relativistic Eulerian Vlasov-Maxwell solver with block-structured adaptive mesh refinement in one spatial and one momentum dimension. The discretization of the Vlasov equation is based on a high-order finite volume method. A flux corrected transport algorithm is applied to limit spurious oscillations and ensure the physical character of the distribution function. We demonstrate a speed-up by a factor of five, because of the use of an adaptive mesh, in a typical scenario involving laser-plasma interaction in the self-induced transparency regime.
Schwing, Alan Michael
For computational fluid dynamics, the governing equations are solved on a discretized domain of nodes, faces, and cells. The quality of the grid or mesh can be a driving source for error in the results. While refinement studies can help guide the creation of a mesh, grid quality is largely determined by user expertise and understanding of the flow physics. Adaptive mesh refinement is a technique for enriching the mesh during a simulation based on metrics for error, impact on important parameters, or location of important flow features. This can offload from the user some of the difficult and ambiguous decisions necessary when discretizing the domain. This work explores the implementation of adaptive mesh refinement in an implicit, unstructured, finite-volume solver. Consideration is made for applying modern computational techniques in the presence of hanging nodes and refined cells. The approach is developed to be independent of the flow solver in order to provide a path for augmenting existing codes. It is designed to be applicable for unsteady simulations and refinement and coarsening of the grid does not impact the conservatism of the underlying numerics. The effect on high-order numerical fluxes of fourth- and sixth-order are explored. Provided the criteria for refinement is appropriately selected, solutions obtained using adapted meshes have no additional error when compared to results obtained on traditional, unadapted meshes. In order to leverage large-scale computational resources common today, the methods are parallelized using MPI. Parallel performance is considered for several test problems in order to assess scalability of both adapted and unadapted grids. Dynamic repartitioning of the mesh during refinement is crucial for load balancing an evolving grid. Development of the methods outlined here depend on a dual-memory approach that is described in detail. Validation of the solver developed here against a number of motivating problems shows favorable
TRIM: A finite-volume MHD algorithm for an unstructured adaptive mesh
Energy Technology Data Exchange (ETDEWEB)
Schnack, D.D.; Lottati, I.; Mikic, Z. [Science Applications International Corp., San Diego, CA (United States)] [and others
1995-07-01
The authors describe TRIM, a MHD code which uses finite volume discretization of the MHD equations on an unstructured adaptive grid of triangles in the poloidal plane. They apply it to problems related to modeling tokamak toroidal plasmas. The toroidal direction is treated by a pseudospectral method. Care was taken to center variables appropriately on the mesh and to construct a self adjoint diffusion operator for cell centered variables.
Mesh locking effects in the finite volume solution of 2-D anisotropic diffusion equations
Manzini, Gianmarco; Putti, Mario
2007-01-01
Strongly anisotropic diffusion equations require special techniques to overcome or reduce the mesh locking phenomenon. We present a finite volume scheme that tries to approximate with the best possible accuracy the quantities that are of importance in discretizing anisotropic fluxes. In particular, we discuss the crucial role of accurate evaluations of the tangential components of the gradient acting tangentially to the control volume boundaries, that are called into play by anisotropic diffusion tensors. To obtain the sought characteristics from the proposed finite volume method, we employ a second-order accurate reconstruction scheme which is used to evaluate both normal and tangential cell-interface gradients. The experimental results on a number of different meshes show that the scheme maintains optimal convergence rates in both L2 and H1 norms except for the benchmark test considering full Neumann boundary conditions on non-uniform grids. In such a case, a severe locking effect is experienced and documented. However, within the range of practical values of the anisotropy ratio, the scheme is robust and efficient. We postulate and verify experimentally the existence of a quadratic relationship between the anisotropy ratio and the mesh size parameter that guarantees optimal and sub-optimal convergence rates.
Yu, Guojun
2012-10-01
In this article, comparative studies on computational accuracies and convergence rates of triangular and quadrilateral meshes are carried out in the frame work of the finite-volume method. By theoretical analysis, we conclude that the number of triangular cells needs to be 4/3 times that of quadrilateral cells to obtain similar accuracy. The conclusion is verified by a number of numerical examples. In addition, the convergence rates of the triangular meshes are found to be slower than those of the quadrilateral meshes when the same accuracy is obtained with these two mesh types. © 2012 Taylor and Francis Group, LLC.
ADER-WENO finite volume schemes with space-time adaptive mesh refinement
Dumbser, Michael; Zanotti, Olindo; Hidalgo, Arturo; Balsara, Dinshaw S.
2013-09-01
We present the first high order one-step ADER-WENO finite volume scheme with adaptive mesh refinement (AMR) in multiple space dimensions. High order spatial accuracy is obtained through a WENO reconstruction, while a high order one-step time discretization is achieved using a local space-time discontinuous Galerkin predictor method. Due to the one-step nature of the underlying scheme, the resulting algorithm is particularly well suited for an AMR strategy on space-time adaptive meshes, i.e. with time-accurate local time stepping. The AMR property has been implemented 'cell-by-cell', with a standard tree-type algorithm, while the scheme has been parallelized via the message passing interface (MPI) paradigm. The new scheme has been tested over a wide range of examples for nonlinear systems of hyperbolic conservation laws, including the classical Euler equations of compressible gas dynamics and the equations of magnetohydrodynamics (MHD). High order in space and time have been confirmed via a numerical convergence study and a detailed analysis of the computational speed-up with respect to highly refined uniform meshes is also presented. We also show test problems where the presented high order AMR scheme behaves clearly better than traditional second order AMR methods. The proposed scheme that combines for the first time high order ADER methods with space-time adaptive grids in two and three space dimensions is likely to become a useful tool in several fields of computational physics, applied mathematics and mechanics.
Directory of Open Access Journals (Sweden)
Dalissier E.
2013-12-01
Full Text Available The objective of the ComPASS project is to develop a parallel multiphase Darcy flow simulator adapted to general unstructured polyhedral meshes (in a general sense with possibly non planar faces and to the parallelization of advanced finite volume discretizations with various choices of the degrees of freedom such as cell centres, vertices, or face centres. The main targeted applications are the simulation of CO2 geological storage, nuclear waste repository and reservoir simulations. The CEMRACS 2012 summer school devoted to high performance computing has been an ideal framework to start this collaborative project. This paper describes what has been achieved during the four weeks of the CEMRACS project which has been focusing on the implementation of basic features of the code such as the distributed unstructured polyhedral mesh, the synchronization of the degrees of freedom, and the connection to scientific libraries including the partitioner METIS, the visualization tool PARAVIEW, and the parallel linear solver library PETSc. The parallel efficiency of this first version of the ComPASS code has been validated on a toy parabolic problem using the Vertex Approximate Gradient finite volume spatial discretization with both cell and vertex degrees of freedom, combined with an Euler implicit time integration.
ADER-WENO Finite Volume Schemes with Space-Time Adaptive Mesh Refinement
Dumbser, Michael; Hidalgo, Arturo; Balsara, Dinshaw S
2012-01-01
We present the first high order one-step ADER-WENO finite volume scheme with Adaptive Mesh Refinement (AMR) in multiple space dimensions. High order spatial accuracy is obtained through a WENO reconstruction, while a high order one-step time discretization is achieved using a local space-time discontinuous Galerkin predictor method. Due to the one-step nature of the underlying scheme, the resulting algorithm is particularly well suited for an AMR strategy on space-time adaptive meshes, i.e.with time-accurate local time stepping. The AMR property has been implemented 'cell-by-cell', with a standard tree-type algorithm, while the scheme has been parallelized via the Message Passing Interface (MPI) paradigm. The new scheme has been tested over a wide range of examples for nonlinear systems of hyperbolic conservation laws, including the classical Euler equations of compressible gas dynamics and the equations of magnetohydrodynamics (MHD). High order in space and time have been confirmed via a numerical convergenc...
Adam, A.; Pavlidis, D.; Percival, J. R.; Salinas, P.; Xie, Z.; Fang, F.; Pain, C. C.; Muggeridge, A. H.; Jackson, M. D.
2016-09-01
A general, higher-order, conservative and bounded interpolation for the dynamic and adaptive meshing of control-volume fields dual to continuous and discontinuous finite element representations is presented. Existing techniques such as node-wise interpolation are not conservative and do not readily generalise to discontinuous fields, whilst conservative methods such as Grandy interpolation are often too diffusive. The new method uses control-volume Galerkin projection to interpolate between control-volume fields. Bounded solutions are ensured by using a post-interpolation diffusive correction. Example applications of the method to interface capturing during advection and also to the modelling of multiphase porous media flow are presented to demonstrate the generality and robustness of the approach.
Energy Technology Data Exchange (ETDEWEB)
Wienke, B.R.; O' Dell, R.D.
1976-12-01
ESECT and EMAP are subroutines which provide a computer algorithm for mapping arbitrary meshes onto rectangular meshes in cylindrical (r,z) geometry. Input consists of the lines defining the rectangular mesh and the coordinates of the arbitrary mesh, which are assumed to be joined by straight lines. Output consists of the intersection volumes with designation of common mesh zones. The ESECT and EMAP routines do not comprise a ''free-standing'' code but, instead, are intended for inclusion in existing codes for which one mesh structure (typically Lagrangian) needs to be mapped onto an Eulerian mesh. Such mappings are of interest in coupled hydrodynamic and neutronic calculations. Exact expressions for the volumes of rotation (about z-axis) generated by the planar mesh intersection areas are used. Intersection points of the two meshes are computed and mapped onto corresponding regions on the rectangular mesh. Intersection points with the same regional indices are recorded into multilaterals, and the multilaterals are triangulated to facilitate computation of the intersection volumes. Dimension statements within ESECT/EMAP presently allow for rectangular and arbitrary meshes of 10k and 3.6k grid points. Scaling of all arrays to suit individual applications is easily effected. Computations of intersection volumes generated by overlapping 10k rectangular and 2.2k radial meshes require an average of 18 s computer time, while computation times for the same meshes scaled by a factor of /sup 1///sub 4/ in number of grid points average 3 s on the CDC 7600. Generally, cases of small cell rectangular meshes overlaid on large cell arbitrary meshes require the longer running times. 10 figures, 2 tables.
Spherical geodesic mesh generation
Energy Technology Data Exchange (ETDEWEB)
Fung, Jimmy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kenamond, Mark Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Burton, Donald E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Shashkov, Mikhail Jurievich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2015-02-27
In ALE simulations with moving meshes, mesh topology has a direct influence on feature representation and code robustness. In three-dimensional simulations, modeling spherical volumes and features is particularly challenging for a hydrodynamics code. Calculations on traditional spherical meshes (such as spin meshes) often lead to errors and symmetry breaking. Although the underlying differencing scheme may be modified to rectify this, the differencing scheme may not be accessible. This work documents the use of spherical geodesic meshes to mitigate solution-mesh coupling. These meshes are generated notionally by connecting geodesic surface meshes to produce triangular-prismatic volume meshes. This mesh topology is fundamentally different from traditional mesh topologies and displays superior qualities such as topological symmetry. This work describes the geodesic mesh topology as well as motivating demonstrations with the FLAG hydrocode.
Casero, Ramón; Siedlecka, Urszula; Jones, Elizabeth S; Gruscheski, Lena; Gibb, Matthew; Schneider, Jürgen E; Kohl, Peter; Grau, Vicente
2017-05-01
Traditional histology is the gold standard for tissue studies, but it is intrinsically reliant on two-dimensional (2D) images. Study of volumetric tissue samples such as whole hearts produces a stack of misaligned and distorted 2D images that need to be reconstructed to recover a congruent volume with the original sample's shape. In this paper, we develop a mathematical framework called Transformation Diffusion (TD) for stack alignment refinement as a solution to the heat diffusion equation. This general framework does not require contour segmentation, is independent of the registration method used, and is trivially parallelizable. After the first stack sweep, we also replace registration operations by operations in the space of transformations, several orders of magnitude faster and less memory-consuming. Implementing TD with operations in the space of transformations produces our Transformation Diffusion Reconstruction (TDR) algorithm, applicable to general transformations that are closed under inversion and composition. In particular, we provide formulas for translation and affine transformations. We also propose an Approximated TDR (ATDR) algorithm that extends the same principles to tensor-product B-spline transformations. Using TDR and ATDR, we reconstruct a full mouse heart at pixel size 0.92µm×0.92µm, cut 10µm thick, spaced 20µm (84G). Our algorithms employ only local information from transformations between neighboring slices, but the TD framework allows theoretical analysis of the refinement as applying a global Gaussian low-pass filter to the unknown stack misalignments. We also show that reconstruction without an external reference produces large shape artifacts in a cardiac specimen while still optimizing slice-to-slice alignment. To overcome this problem, we use a pre-cutting blockface imaging process previously developed by our group that takes advantage of Brewster's angle and a polarizer to capture the outline of only the topmost layer of wax
Liu, Hongxu; Jiao, Xiangmin
2016-06-01
ENO (Essentially Non-Oscillatory) and WENO (Weighted Essentially Non-Oscillatory) schemes are widely used high-order schemes for solving partial differential equations (PDEs), especially hyperbolic conservation laws with piecewise smooth solutions. For structured meshes, these techniques can achieve high order accuracy for smooth functions while being non-oscillatory near discontinuities. For unstructured meshes, which are needed for complex geometries, similar schemes are required but they are much more challenging. We propose a new family of non-oscillatory schemes, called WLS-ENO, in the context of solving hyperbolic conservation laws using finite-volume methods over unstructured meshes. WLS-ENO is derived based on Taylor series expansion and solved using a weighted least squares formulation. Unlike other non-oscillatory schemes, the WLS-ENO does not require constructing sub-stencils, and hence it provides a more flexible framework and is less sensitive to mesh quality. We present rigorous analysis of the accuracy and stability of WLS-ENO, and present numerical results in 1-D, 2-D, and 3-D for a number of benchmark problems, and also report some comparisons against WENO.
Boscheri, Walter; Dumbser, Michael
2017-10-01
We present a new family of high order accurate fully discrete one-step Discontinuous Galerkin (DG) finite element schemes on moving unstructured meshes for the solution of nonlinear hyperbolic PDE in multiple space dimensions, which may also include parabolic terms in order to model dissipative transport processes, like molecular viscosity or heat conduction. High order piecewise polynomials of degree N are adopted to represent the discrete solution at each time level and within each spatial control volume of the computational grid, while high order of accuracy in time is achieved by the ADER approach, making use of an element-local space-time Galerkin finite element predictor. A novel nodal solver algorithm based on the HLL flux is derived to compute the velocity for each nodal degree of freedom that describes the current mesh geometry. In our algorithm the spatial mesh configuration can be defined in two different ways: either by an isoparametric approach that generates curved control volumes, or by a piecewise linear decomposition of each spatial control volume into simplex sub-elements. Each technique generates a corresponding number of geometrical degrees of freedom needed to describe the current mesh configuration and which must be considered by the nodal solver for determining the grid velocity. The connection of the old mesh configuration at time tn with the new one at time t n + 1 provides the space-time control volumes on which the governing equations have to be integrated in order to obtain the time evolution of the discrete solution. Our numerical method belongs to the category of so-called direct Arbitrary-Lagrangian-Eulerian (ALE) schemes, where a space-time conservation formulation of the governing PDE system is considered and which already takes into account the new grid geometry (including a possible rezoning step) directly during the computation of the numerical fluxes. We emphasize that our method is a moving mesh method, as opposed to total
Stack test results at Phelps-Dodge Corporation, Ajo, Arizona. Volume III. Final report
Energy Technology Data Exchange (ETDEWEB)
Steiner, J.
1977-03-01
Contents: Sampling schedules for simultaneous stack tests; Weight versus time curve for glass fiber filter; Sample calculation for statistical analysis; Individual process weight calculations; Individual filter, particulate and residue weight data.
A shock-fitting technique for cell-centered finite volume methods on unstructured dynamic meshes
Zou, Dongyang; Xu, Chunguang; Dong, Haibo; Liu, Jun
2017-09-01
In this work, the shock-fitting technique is further developed on unstructured dynamic meshes. The shock wave is fitted and regarded as a special boundary, whose boundary conditions and boundary speed (shock speed) are determined by solving Rankine-Hugoniot relations. The fitted shock splits the entire computational region into subregions, in which the flows are free from shocks and flow states are solved by a shock-capturing code based on arbitrary Lagrangian-Eulerian algorithm. Along with the motion of the fitted shock, an unstructured dynamic meshes algorithm is used to update the internal node's position to maintain the high quality of computational meshes. The successful applications prove the present shock-fitting to be a valid technique.
Energy Technology Data Exchange (ETDEWEB)
Ismagilov, Timur Z., E-mail: ismagilov@academ.org
2015-02-01
This paper presents a second order finite volume scheme for numerical solution of Maxwell's equations with discontinuous dielectric permittivity and magnetic permeability on unstructured meshes. The scheme is based on Godunov scheme and employs approaches of Van Leer and Lax–Wendroff to increase the order of approximation. To keep the second order of approximation near dielectric permittivity and magnetic permeability discontinuities a novel technique for gradient calculation and limitation is applied near discontinuities. Results of test computations for problems with linear and curvilinear discontinuities confirm second order of approximation. The scheme was applied to modelling propagation of electromagnetic waves inside photonic crystal waveguides with a bend.
Directory of Open Access Journals (Sweden)
Amaziane Brahim
2014-07-01
Full Text Available In this paper, we consider adaptive numerical simulation of miscible displacement problems in porous media, which are modeled by single phase flow equations. A vertex-centred finite volume method is employed to discretize the coupled system: the Darcy flow equation and the diffusion-convection concentration equation. The convection term is approximated with a Godunov scheme over the dual finite volume mesh, whereas the diffusion-dispersion term is discretized by piecewise linear conforming finite elements. We introduce two kinds of indicators, both of them of residual type. The first one is related to time discretization and is local with respect to the time discretization: thus, at each time, it provides an appropriate information for the choice of the next time step. The second is related to space discretization and is local with respect to both the time and space variable and the idea is that at each time it is an efficient tool for mesh adaptivity. An error estimation procedure evaluates where additional refinement is needed and grid generation procedures dynamically create or remove fine-grid patches as resolution requirements change. The method was implemented in the software MELODIE, developed by the French Institute for Radiological Protection and Nuclear Safety (IRSN, Institut de Radioprotection et de Sûreté Nucléaire. The algorithm is then used to simulate the evolution of radionuclide migration from the waste packages through a heterogeneous disposal, demonstrating its capability to capture complex behavior of the resulting flow.
Coupling of a 3-D vortex particle-mesh method with a finite volume near-wall solver
Marichal, Y.; Lonfils, T.; Duponcheel, M.; Chatelain, P.; Winckelmans, G.
2011-11-01
This coupling aims at improving the computational efficiency of high Reynolds number bluff body flow simulations by using two complementary methods and exploiting their respective advantages in distinct parts of the domain. Vortex particle methods are particularly well suited for free vortical flows such as wakes or jets (the computational domain -with non zero vorticity- is then compact and dispersion errors are negligible). Finite volume methods, however, can handle boundary layers much more easily due to anisotropic mesh refinement. In the present approach, the vortex method is used in the whole domain (overlapping domain technique) but its solution is highly underresolved in the vicinity of the wall. It thus has to be corrected by the near-wall finite volume solution at each time step. Conversely, the vortex method provides the outer boundary conditions for the near-wall solver. A parallel multi-resolution vortex particle-mesh approach is used here along with an Immersed Boundary method in order to take the walls into account. The near-wall flow is solved by OpenFOAM® using the PISO algorithm. We validate the methodology on the flow past a sphere at a moderate Reynolds number. F.R.S. - FNRS Research Fellow.
Energy Technology Data Exchange (ETDEWEB)
Hermeline, F
2008-12-15
This dissertation presents some new methods of finite volume type for approximating partial differential equations on arbitrary meshes. The main idea lies in solving twice the problem to be dealt with. One addresses the elliptic equations with variable (anisotropic, antisymmetric, discontinuous) coefficients, the parabolic linear or non linear equations (heat equation, radiative diffusion, magnetic diffusion with Hall effect), the wave type equations (Maxwell, acoustics), the elasticity and Stokes'equations. Numerous numerical experiments show the good behaviour of this type of method. (author)
Stack test results at Phelps-Dodge Corporation, Ajo, Arizona. Volume I. Final report
Energy Technology Data Exchange (ETDEWEB)
Steiner, J.
1977-03-01
In July 1976 at the request of EPA, Region IX, Enforcement Division, the Aerotherm Division of the Acurex Corporation conducted a series of air pollutant mass emissions tests at the new Cornelia Branch copper smelter of the Phelps Dodge Corporation located in Ajo, Arizona. The tests were performed simultaneously at three locations: (1) the main stack, (2) the reverberatory furnace duct and (3) the converter side sulfuric acid plant tail gas duct. Tests for particulate matter (Method 5), sulfur dioxide and sulfuric acid (Method 8) were conducted at each location using a combined sampling train. In addition tests for 'condensable particulate matter' were conducted at the main stack and the reverberatory furnace duct using the combined Method 5 and 8 sampling train with an instack filter added.
A new high-order finite volume method for 3D elastic wave simulation on unstructured meshes
Zhang, Wensheng; Zhuang, Yuan; Zhang, Lina
2017-07-01
In this paper, we proposed a new efficient high-order finite volume method for 3D elastic wave simulation on unstructured tetrahedral meshes. With the relative coarse tetrahedral meshes, we make subdivision in each tetrahedron to generate a stencil for the high-order polynomial reconstruction. The subdivision algorithm guarantees the number of subelements is greater than the degrees of freedom of a complete polynomial. We perform the reconstruction on this stencil by using cell-averaged quantities based on the hierarchical orthonormal basis functions. Unlike the traditional high-order finite volume method, our new method has a very local property like DG and can be written as an inner-split computational scheme which is beneficial to reducing computational amount. Moreover, the stencil in our method is easy to generate for all tetrahedrons especially in the three-dimensional case. The resulting reconstruction matrix is invertible and remains unchanged for all tetrahedrons and thus it can be pre-computed and stored before time evolution. These special advantages facilitate the parallelization and high-order computations. We show convergence results obtained with the proposed method up to fifth order accuracy in space. The high-order accuracy in time is obtained by the Runge-Kutta method. Comparisons between numerical and analytic solutions show the proposed method can provide accurate wavefield information. Numerical simulation for a realistic model with complex topography demonstrates the effectiveness and potential applications of our method. Though the method is proposed based on the 3D elastic wave equation, it can be extended to other linear hyperbolic system.
Salinas, P.; Jackson, M.; Pavlidis, D.; Pain, C.; Adam, A.; Xie, Z.; Percival, J. R.
2015-12-01
We present a new, high-order, control-volume-finite-element (CVFE) method with discontinuous representation for pressure and velocity to simulate multiphase flow in heterogeneous porous media. Time is discretized using an adaptive, fully implicit method. Heterogeneous geologic features are represented as volumes bounded by surfaces. Within these volumes, termed geologic domains, the material properties are constant. A given model typically contains numerous such geologic domains. Our approach conserves mass and does not require the use of CVs that span domain boundaries. Computational efficiency is increased by use of dynamic mesh optimization, in which an unstructured mesh adapts in space and time to key solution fields, such as pressure, velocity or saturation, whilst preserving the geometry of the geologic domains. Up-, cross- or down-scaling of material properties during mesh optimization is not required, as the properties are uniform within each geologic domain. We demonstrate that the approach, amongst other features, accurately preserves sharp saturation changes associated with high aspect ratio geologic domains such as fractures and mudstones, allowing efficient simulation of flow in highly heterogeneous models. Moreover, accurate solutions are obtained at significantly lower computational cost than an equivalent fine, fixed mesh and conventional CVFE methods. The use of implicit time integration allows the method to efficiently converge using highly anisotropic meshes without having to reduce the time-step. The work is significant for two key reasons. First, it resolves a long-standing problem associated with the use of classical CVFE methods to model flow in highly heterogeneous porous media, in which CVs span boundaries between domains of contrasting material properties. Second, it reduces computational cost/increases solution accuracy through the use of dynamic mesh optimization and time-stepping with large Courant number.
Directory of Open Access Journals (Sweden)
Antonio J. Torregrosa
2017-05-01
Full Text Available Duct junctions play a major role in the operation and design of most piping systems. The objective of this paper is to establish the potential of a staggered mesh finite volume model as a way to improve the description of the effect of simple duct junctions on an otherwise one-dimensional flow system, such as the intake or exhaust of an internal combustion engine. Specific experiments have been performed in which different junctions have been characterized as a multi-port, and that have provided precise and reliable results on the propagation of pressure pulses across junctions. The results obtained have been compared to simulations performed with a staggered mesh finite volume method with different flux limiters and different meshes and, as a reference, have also been compared with the results of a more conventional pressure loss-based model. The results indicate that the staggered mesh finite volume model provides a closer description of wave dynamics, even if further work is needed to establish the optimal calculation settings.
Cheng, Siu-Wing; Shewchuk, Jonathan
2013-01-01
Written by authors at the forefront of modern algorithms research, Delaunay Mesh Generation demonstrates the power and versatility of Delaunay meshers in tackling complex geometric domains ranging from polyhedra with internal boundaries to piecewise smooth surfaces. Covering both volume and surface meshes, the authors fully explain how and why these meshing algorithms work.The book is one of the first to integrate a vast amount of cutting-edge material on Delaunay triangulations. It begins with introducing the problem of mesh generation and describing algorithms for constructing Delaunay trian
Energy Technology Data Exchange (ETDEWEB)
Ahmadi, M. [Heriot Watt Univ., Edinburgh (United Kingdom)
2008-10-15
This paper described a project in which a higher order up-winding scheme was used to solve mass/energy conservation equations for simulating steam flood processes in an oil reservoir. Thermal recovery processes are among the most complex because they require a detailed accounting of thermal energy and chemical reaction kinetics. The numerical simulation of thermal recovery processes involves localized phenomena such as saturation and temperatures fronts due to hyperbolic features of governing conservation laws. A second order accurate FV method that was improved by a moving mesh strategy was used to adjust for moving coordinates on a finely gridded domain. The Finite volume method was used and the problem of steam injection was then tested using derived solution frameworks on both mixed and moving coordinates. The benefits of using a higher-order Godunov solver instead of lower-order ones were qualified. This second order correction resulted in better resolution on moving features. Preferences of higher-order solvers over lower-order ones in terms of shock capturing is under further investigation. It was concluded that although this simulation study was limited to steam flooding processes, the newly presented approach may be suitable to other enhanced oil recovery processes such as VAPEX, SAGD and in situ combustion processes. 23 refs., 28 figs.
DEFF Research Database (Denmark)
2015-01-01
Mesh generation and visualization software based on the CGAL library. Folder content: drawmesh Visualize slices of the mesh (surface/volumetric) as wireframe on top of an image (3D). drawsurf Visualize surfaces of the mesh (surface/volumetric). img2mesh Convert isosurface in image to volumetric...
Stelter, Michael; Reinert, Andreas; Mai, Björn Erik; Kuznecov, Mihail
A solid oxide fuel cell (SOFC) stack module is presented that is designed for operation on diesel reformate in an auxiliary power unit (APU). The stack was designed using a top-down approach, based on a specification of an APU system that is installed on board of vehicles. The stack design is planar, modular and scalable with stamped sheet metal interconnectors. It features thin membrane electrode assemblies (MEAs), such as electrolyte supported cells (ESC) and operates at elevated temperatures around 800 °C. The stack has a low pressure drop in both the anode and the cathode to facilitate a simple system layout. An overview of the technical targets met so far is given. A stack power density of 0.2 kW l -1 has been demonstrated in a fully integrated, thermally self-sustaining APU prototype running with diesel and without an external water supply.
Adaptive mesh generation for image registration and segmentation
DEFF Research Database (Denmark)
Fogtmann, Mads; Larsen, Rasmus
2013-01-01
This paper deals with the problem of generating quality tetrahedral meshes for image registration. From an initial coarse mesh the approach matches the mesh to the image volume by combining red-green subdivision and mesh evolution through mesh-to-image matching regularized with a mesh quality...
Hwang, Won Joo; Lee, Do Heon; Choi, Won; Hwang, Jae Ha; Kim, Kwang Seog; Lee, Sam Yong
2017-08-22
Hinge-shaped fractures are common type of orbital floor blowout fractures, for which reduction and internal fixation is ideal. Nonetheless, orbital floor reconstruction using alloplastic materials without reducing the number of bone fragments is the most frequently used procedure. Therefore, this study analyzed and compared the outcomes between open reduction and internal fixation using absorbable mesh plates and screws, and orbital floor reconstruction, by measuring the orbital volume before and after surgery. Among patients with orbital floor blowout fractures, this study was conducted on 28 patients who underwent open reduction and internal fixation, and 27 patients who underwent orbital floor reconstruction from December 2008 to September 2015. The mechanism of injury, ophthalmic symptoms before and after surgery, and the degree of enophthalmos were examined; subsequently, the volumes of the affected and unaffected sides were measured before and after surgery based on computed tomography images. This study compared the degree of recovery in the correction rate of the orbital volume, ophthalmic symptoms, and enophthalmos between the 2 groups. The patients who underwent open reduction and internal fixation, and the patients who underwent orbital floor reconstruction showed average correction rates of 100.36% and 105.24%, respectively. Open reduction and internal fixation showed statistically, significantly superior treatment outcomes compared with orbital floor reconstruction. The ophthalmic symptoms and incidence of enophthalmos completely resolved in both groups. For orbital floor blowout fractures, open reduction and internal fixation using absorbable mesh plates and screws was a feasible alternative to orbital floor reconstruction.
Chann, B; Goyal, A K; Fan, T Y; Sanchez-Rubio, A; Volodin, B L; Ban, V S
2006-05-01
We report a method of scaling the spatial brightness from commercial off-the-shelf diode laser stacks through wavelength beam combining, by use of a linearly wavelength-chirped volume Bragg grating (VBG). Using a three-bar commercial stack of broad-area lasers and a VBG, we demonstrate 89.5 W cw of beam-combined output with a beam-combining efficiency of 75%. The output beam has a propagation factor M2 approximately 26 on the slow axis and M2 approximately 21 on the fast axis. This corresponds to a brightness of approximately 20 MW/cm2 sr. To our knowledge, this is the highest brightness broad-area diode laser system. We achieve 81% coupling efficiency into a 100 microm, 0.22 N.A. fiber.
Institute of Scientific and Technical Information of China (English)
Min Yang
2007-01-01
In this paper, we consider a hydrodynamic model of the semiconductor device. The approximate solutions are obtained by a mixed finite volume method for the potential equation and multistep upwind finite volume methods for the concentration equations.Error estimates in some discrete norms are derived under some regularity assumptions on the exact solutions.
Energy Technology Data Exchange (ETDEWEB)
Le Dez, V.; Lallemand, M. [Ecole Nationale Superieure de Mecanique et d`Aerotechnique (ENSMA), 86 - Poitiers (France); Sakami, M.; Charette, A. [Quebec Univ., Chicoutimi, PQ (Canada). Dept. des Sciences Appliquees
1996-12-31
The description of an efficient method of radiant heat transfer field determination in a grey semi-transparent environment included in a 2-D polygonal cavity with surface boundaries that reflect the radiation in a purely diffusive manner is proposed, at the equilibrium and in radiation-conduction coupling situation. The technique uses simultaneously the finite-volume method in non-structured triangular mesh, the discrete ordinate method and the ray shooting method. The main mathematical developments and comparative results with the discrete ordinate method in orthogonal curvilinear coordinates are included. (J.S.) 10 refs.
Indian Academy of Sciences (India)
Tomás L Gómez
2001-02-01
This is an expository article on the theory of algebraic stacks. After introducing the general theory, we concentrate in the example of the moduli stack of vector bundles, giving a detailed comparison with the moduli scheme obtained via geometric invariant theory.
Surface meshing with curvature convergence
Li, Huibin
2014-06-01
Surface meshing plays a fundamental role in graphics and visualization. Many geometric processing tasks involve solving geometric PDEs on meshes. The numerical stability, convergence rates and approximation errors are largely determined by the mesh qualities. In practice, Delaunay refinement algorithms offer satisfactory solutions to high quality mesh generations. The theoretical proofs for volume based and surface based Delaunay refinement algorithms have been established, but those for conformal parameterization based ones remain wide open. This work focuses on the curvature measure convergence for the conformal parameterization based Delaunay refinement algorithms. Given a metric surface, the proposed approach triangulates its conformal uniformization domain by the planar Delaunay refinement algorithms, and produces a high quality mesh. We give explicit estimates for the Hausdorff distance, the normal deviation, and the differences in curvature measures between the surface and the mesh. In contrast to the conventional results based on volumetric Delaunay refinement, our stronger estimates are independent of the mesh structure and directly guarantee the convergence of curvature measures. Meanwhile, our result on Gaussian curvature measure is intrinsic to the Riemannian metric and independent of the embedding. In practice, our meshing algorithm is much easier to implement and much more efficient. The experimental results verified our theoretical results and demonstrated the efficiency of the meshing algorithm. © 2014 IEEE.
Institute of Scientific and Technical Information of China (English)
Wei Gao; Ru-Xun Liu; Hong Li
2012-01-01
This paper proposes a hybrid vertex-centered finite volume/finite element method for sol ution of the two dimensional (2D) incompressible Navier-Stokes equations on unstructured grids.An incremental pressure fractional step method is adopted to handle the velocity-pressure coupling.The velocity and the pressure are collocated at the node of the vertex-centered control volume which is formed by joining the centroid of cells sharing the common vertex.For the temporal integration of the momentum equations,an implicit second-order scheme is utilized to enhance the computational stability and eliminate the time step limit due to the diffusion term.The momentum equations are discretized by the vertex-centered finite volume method (FVM) and the pressure Poisson equation is solved by the Galerkin finite element method (FEM).The momentum interpolation is used to damp out the spurious pressure wiggles.The test case with analytical solutions demonstrates second-order accuracy of the current hybrid scheme in time and space for both velocity and pressure.The classic test cases,the lid-driven cavity flow,the skew cavity flow and the backward-facing step flow,show that numerical results are in good agreement with the published benchmark solutions.
Energy Technology Data Exchange (ETDEWEB)
Guzik, S; McCorquodale, P; Colella, P
2011-12-16
A fourth-order accurate finite-volume method is presented for solving time-dependent hyperbolic systems of conservation laws on mapped grids that are adaptively refined in space and time. Novel considerations for formulating the semi-discrete system of equations in computational space combined with detailed mechanisms for accommodating the adapting grids ensure that conservation is maintained and that the divergence of a constant vector field is always zero (freestream-preservation property). Advancement in time is achieved with a fourth-order Runge-Kutta method.
Shao, Yu-Xiu; Chen, Guan-Hua; Fang, Rou; Zhang, Li; Yi, Ling-Xiao; Meng, Hong-Lian
2016-05-04
A new micellar electrokinetic chromatography method with large-volume sample stacking and polarity switching was developed to analyze amoxicllin, cephalexin, oxacillin, penicillin G, cefazolin, and cefoperazone in milk and egg. The important parameters influencing separation and enrichment factors were optimized. The optimized running buffer consisted of 10 mM phosphate and 22 mM SDS at pH 6.7. The sample size was 1.47 kPa × 690 s, the reverse voltage was 20 kV, and the electric current recovery was 95%. Under these optimum conditions, the enrichment factors of six β-lactams were 193-601. Their LODs were <0.26 ng/g, and LOQs were all 2 ng/g, which was only 1/50-1/2 of the maximum residual limits demanded by U.S. and Japanese regulations. The intraday and interday RSDs of method were lower than 3.70 and 3.91%, respectively. The method can be applied to determine these six antibiotic residues in egg and milk.
Cheng, Yi-Cian; Wang, Chun-Chi; Chen, Yen-Ling; Wu, Shou-Mei
2012-05-01
This study proposes a capillary electrophoresis method incorporating large volume sample stacking, EOF and sweeping for detection of common preservatives used in cosmetic products. The method was developed using chemometric experimental design (fractional factorial design and central composite design) to determine multiple separation variables by efficient steps. The samples were loaded by hydrodynamic injection (10 psi, 90 s), and separated by phosphate buffer (50 mM, pH 3) containing 30% methanol and 80 mM SDS at -20 kV. During method validation, calibration curves were found to be linear over a range of 5-100 μg/mL for butyl paraben and isobutyl paraben; 0.05-10 μg/mL for ethyl paraben; 0.2-50 μg/mL for dehydroacetic acid; 0.5-70 μg/mL for methyl paraben; 5-350 μg/mL for sorbic acid; 0.02-450 μg/mL for p-hydroxybenzoic acid and 0.05-10 μg/mL for salicylic acid and benzoic acid. The analytes were analysed simultaneously and their detection limits (S/N = 3) were down to 0.005-2 μg/mL. The analysis method was successfully used for detection of preservatives used in commercial cosmetics.
Automatic Mesh Generation of Hybrid Mesh on Valves in Multiple Positions in Feedline Systems
Ross, Douglass H.; Ito, Yasushi; Dorothy, Fredric W.; Shih, Alan M.; Peugeot, John
2010-01-01
Fluid flow simulations through a valve often require evaluation of the valve in multiple opening positions. A mesh has to be generated for the valve for each position and compounding. The problem is the fact that the valve is typically part of a larger feedline system. In this paper, we propose to develop a system to create meshes for feedline systems with parametrically controlled valve openings. Herein we outline two approaches to generate the meshes for a valve in a feedline system at multiple positions. There are two issues that must be addressed. The first is the creation of the mesh on the valve for multiple positions. The second is the generation of the mesh for the total feedline system including the valve. For generation of the mesh on the valve, we will describe the use of topology matching and mesh generation parameter transfer. For generation of the total feedline system, we will describe two solutions that we have implemented. In both cases the valve is treated as a component in the feedline system. In the first method the geometry of the valve in the feedline system is replaced with a valve at a different opening position. Geometry is created to connect the valve to the feedline system. Then topology for the valve is created and the portion of the topology for the valve is topology matched to the standard valve in a different position. The mesh generation parameters are transferred and then the volume mesh for the whole feedline system is generated. The second method enables the user to generate the volume mesh on the valve in multiple open positions external to the feedline system, to insert it into the volume mesh of the feedline system, and to reduce the amount of computer time required for mesh generation because only two small volume meshes connecting the valve to the feedline mesh need to be updated.
... Prosthetics Hernia Surgical Mesh Implants Hernia Surgical Mesh Implants Share Tweet Linkedin Pin it More sharing options ... majority of tissue used to produce these mesh implants are from a pig (porcine) or cow (bovine) ...
Urogynecologic Surgical Mesh Implants
... Prosthetics Urogynecologic Surgical Mesh Implants Urogynecologic Surgical Mesh Implants Share Tweet Linkedin Pin it More sharing options ... majority of tissue used to produce these mesh implants are from a pig (porcine) or cow (bovine). ...
Dumbser, Michael; Loubère, Raphaël
2016-08-01
In this paper we propose a simple, robust and accurate nonlinear a posteriori stabilization of the Discontinuous Galerkin (DG) finite element method for the solution of nonlinear hyperbolic PDE systems on unstructured triangular and tetrahedral meshes in two and three space dimensions. This novel a posteriori limiter, which has been recently proposed for the simple Cartesian grid case in [62], is able to resolve discontinuities at a sub-grid scale and is substantially extended here to general unstructured simplex meshes in 2D and 3D. It can be summarized as follows: At the beginning of each time step, an approximation of the local minimum and maximum of the discrete solution is computed for each cell, taking into account also the vertex neighbors of an element. Then, an unlimited discontinuous Galerkin scheme of approximation degree N is run for one time step to produce a so-called candidate solution. Subsequently, an a posteriori detection step checks the unlimited candidate solution at time t n + 1 for positivity, absence of floating point errors and whether the discrete solution has remained within or at least very close to the bounds given by the local minimum and maximum computed in the first step. Elements that do not satisfy all the previously mentioned detection criteria are flagged as troubled cells. For these troubled cells, the candidate solution is discarded as inappropriate and consequently needs to be recomputed. Within these troubled cells the old discrete solution at the previous time tn is scattered onto small sub-cells (Ns = 2 N + 1 sub-cells per element edge), in order to obtain a set of sub-cell averages at time tn. Then, a more robust second order TVD finite volume scheme is applied to update the sub-cell averages within the troubled DG cells from time tn to time t n + 1. The new sub-grid data at time t n + 1 are finally gathered back into a valid cell-centered DG polynomial of degree N by using a classical conservative and higher order
Parallel Adaptive Mesh Refinement
Energy Technology Data Exchange (ETDEWEB)
Diachin, L; Hornung, R; Plassmann, P; WIssink, A
2005-03-04
As large-scale, parallel computers have become more widely available and numerical models and algorithms have advanced, the range of physical phenomena that can be simulated has expanded dramatically. Many important science and engineering problems exhibit solutions with localized behavior where highly-detailed salient features or large gradients appear in certain regions which are separated by much larger regions where the solution is smooth. Examples include chemically-reacting flows with radiative heat transfer, high Reynolds number flows interacting with solid objects, and combustion problems where the flame front is essentially a two-dimensional sheet occupying a small part of a three-dimensional domain. Modeling such problems numerically requires approximating the governing partial differential equations on a discrete domain, or grid. Grid spacing is an important factor in determining the accuracy and cost of a computation. A fine grid may be needed to resolve key local features while a much coarser grid may suffice elsewhere. Employing a fine grid everywhere may be inefficient at best and, at worst, may make an adequately resolved simulation impractical. Moreover, the location and resolution of fine grid required for an accurate solution is a dynamic property of a problem's transient features and may not be known a priori. Adaptive mesh refinement (AMR) is a technique that can be used with both structured and unstructured meshes to adjust local grid spacing dynamically to capture solution features with an appropriate degree of resolution. Thus, computational resources can be focused where and when they are needed most to efficiently achieve an accurate solution without incurring the cost of a globally-fine grid. Figure 1.1 shows two example computations using AMR; on the left is a structured mesh calculation of a impulsively-sheared contact surface and on the right is the fuselage and volume discretization of an RAH-66 Comanche helicopter [35]. Note the
He, Hui; Liu, Shuhui; Meng, Zhaofu; Hu, Shibing
2014-09-26
The current routes to couple dispersive liquid-liquid microextraction (DLLME) with capillary electrophoresis (CE) are evaporation of water immiscible extractants and backextraction of analytes. The former is not applicable to extractants with high boiling points, the latter being effective only for acidic or basic analytes, both of which limit the further application of DLLME-CE. In this study, with 1-octanol as a model DLLME extractant and six phenols as model analytes, a novel method based on acetonitrile stacking and sweeping is proposed to accomplish large-volume injection of 1-octanol diluted with a solvent-saline mixture before micellar electrokinetic chromatography. Brij-35 and β-cyclodextrin were employed as pseudostationary phases for sweeping and also for improving the compatibility of sample zone and aqueous running buffer. A short solvent-saline plug was used to offset the adverse effect of the water immiscible extractant on focusing efficiency. The key parameters affecting separation and concentration were systematically optimized; the effect of Brij-35 and 1-octanol on focusing mechanism was discussed. Under the optimized conditions, with ∼ 30-fold concentration enrichment by DLLME, the diluted extractant (8×) was then injected into the capillary with a length of 21 cm (42% of the total length), which yielded the overall improvements in sensitivity of 170-460. Limits of detection and qualification ranged from 0.2 to 1.0 ng/mL and 1.0 to 3.4 g/mL, respectively. Acceptable repeatability lower than 3.0% for migration time and 9.0% for peak areas were obtained. The developed method was successfully applied for analysis of the phenol pollutants in real water samples.
Measurement of heat conduction through stacked screens.
Lewis, M A; Kuriyama, T; Kuriyama, F; Radebaugh, R
1998-01-01
This paper describes the experimental apparatus for the measurement of heat conduction through stacked screens as well as some experimental results taken with the apparatus. Screens are stacked in a fiberglass-epoxy cylinder, which is 24.4 mm in diameter and 55 mm in length. The cold end of the stacked screens is cooled by a Gifford-McMahon (GM) cryocooler at cryogenic temperature, and the hot end is maintained at room temperature. Heat conduction through the screens is determined from the temperature gradient in a calibrated heat flow sensor mounted between the cold end of the stacked screens and the GM cryocooler. The samples used for these experiments consisted of 400-mesh stainless steel screens, 400-mesh phosphor bronze screens, and two different porosities of 325-mesh stainless steel screens. The wire diameter of the 400-mesh stainless steel and phosphor bronze screens was 25.4 micrometers and the 325-mesh stainless steel screen wire diameters were 22.9 micrometers and 27.9 micrometers. Standard porosity values were used for the experimental data with additional porosity values used on selected experiments. The experimental results showed that the helium gas between each screen enhanced the heat conduction through the stacked screens by several orders of magnitude compared to that in vacuum. The conduction degradation factor is the ratio of actual heat conduction to the heat conduction where the regenerator material is assumed to be a solid rod of the same cross sectional area as the metal fraction of the screen. This factor was about 0.1 for the stainless steel and 0.022 for the phosphor bronze, and almost constant for the temperature range of 40 to 80 K at the cold end.
Directory of Open Access Journals (Sweden)
Claudiney de Lima Batista Marques
2012-01-01
Full Text Available Objetivo: Revisar a literatura acerca das diferenças entre os espirômetros de incentivo (EI e a técnica de Breath-Stacking, comparando-se os espirômetros de incentivo a volume e a fluxo entre si e ambos com o Breath-Stacking. Métodos: Realizou-se busca na base de dados PUBMED com os termos “incentive spirometry” e “Breath-Stacking”, sendo selecionados para essa revisão apenas aqueles que tratavam das diferenças entre os EI e que comparavam essa técnica com a espirometria de incentivo. Resultados: Os Espirômetros de Incentivo a volumes promovem um padrão respiratório mais abdominal, com menor utilização de músculos acessórios da respiração quando comparados a espirômetros a fluxo. Um tempo inspiratório mais prolongado e menores freqüências respiratórias também estão associados à utilização dos instrumentos a volume. O Breath-Stacking proporciona uma expansão pulmonar até volumes próximos à Capacidade Pulmonar Total. Na literatura revisada, volumes significativamente maiores, bem como um tempo de sustentação da inspiração mais prolongado foram obtidos durante a utilização do Breath-Stacking, quando comparado aos Espirômetros. O Breath-Stacking também difere dos Espirômetros de incentivo pelo padrão de ventilação pulmonar, sendo este mais direcionado às bases e à periferia do pulmão, regiões mais suscetíveis às complicações pulmonares que podem ocorrer no período pós-operatório. Conclusão: O sucesso da terapia incentivadora da inspiração é influenciado pela escolha criteriosa do instrumento ou técnica mais adequada a cada paciente.
Electrochemical cell stack assembly
Jacobson, Craig P.; Visco, Steven J.; De Jonghe, Lutgard C.
2010-06-22
Multiple stacks of tubular electrochemical cells having a dense electrolyte disposed between an anode and a cathode preferably deposited as thin films arranged in parallel on stamped conductive interconnect sheets or ferrules. The stack allows one or more electrochemical cell to malfunction without disabling the entire stack. Stack efficiency is enhanced through simplified gas manifolding, gas recycling, reduced operating temperature and improved heat distribution.
21st International Meshing Roundtable
Weill, Jean-Christophe
2013-01-01
This volume contains the articles presented at the 21st International Meshing Roundtable (IMR) organized, in part, by Sandia National Laboratories and was held on October 7–10, 2012 in San Jose, CA, USA. The first IMR was held in 1992, and the conference series has been held annually since. Each year the IMR brings together researchers, developers, and application experts in a variety of disciplines, from all over the world, to present and discuss ideas on mesh generation and related topics. The technical papers in this volume present theoretical and novel ideas and algorithms with practical potential, as well as technical applications in science and engineering, geometric modeling, computer graphics, and visualization.
Automatic Scheme Selection for Toolkit Hex Meshing
Energy Technology Data Exchange (ETDEWEB)
TAUTGES,TIMOTHY J.; WHITE,DAVID R.
1999-09-27
Current hexahedral mesh generation techniques rely on a set of meshing tools, which when combined with geometry decomposition leads to an adequate mesh generation process. Of these tools, sweeping tends to be the workhorse algorithm, accounting for at least 50% of most meshing applications. Constraints which must be met for a volume to be sweepable are derived, and it is proven that these constraints are necessary but not sufficient conditions for sweepability. This paper also describes a new algorithm for detecting extruded or sweepable geometries. This algorithm, based on these constraints, uses topological and local geometric information, and is more robust than feature recognition-based algorithms. A method for computing sweep dependencies in volume assemblies is also given. The auto sweep detect and sweep grouping algorithms have been used to reduce interactive user time required to generate all-hexahedral meshes by filtering out non-sweepable volumes needing further decomposition and by allowing concurrent meshing of independent sweep groups. Parts of the auto sweep detect algorithm have also been used to identify independent sweep paths, for use in volume-based interval assignment.
Zhang, Fang
2011-02-01
Mesh current collectors made of stainless steel (SS) can be integrated into microbial fuel cell (MFC) cathodes constructed of a reactive carbon black and Pt catalyst mixture and a poly(dimethylsiloxane) (PDMS) diffusion layer. It is shown here that the mesh properties of these cathodes can significantly affect performance. Cathodes made from the coarsest mesh (30-mesh) achieved the highest maximum power of 1616 ± 25 mW m-2 (normalized to cathode projected surface area; 47.1 ± 0.7 W m-3 based on liquid volume), while the finest mesh (120-mesh) had the lowest power density (599 ± 57 mW m-2). Electrochemical impedance spectroscopy showed that charge transfer and diffusion resistances decreased with increasing mesh opening size. In MFC tests, the cathode performance was primarily limited by reaction kinetics, and not mass transfer. Oxygen permeability increased with mesh opening size, accounting for the decreased diffusion resistance. At higher current densities, diffusion became a limiting factor, especially for fine mesh with low oxygen transfer coefficients. These results demonstrate the critical nature of the mesh size used for constructing MFC cathodes. © 2010 Elsevier B.V. All rights reserved.
Pei Ping; YURY N. PETRENKO
2015-01-01
A Mesh network simulation framework which provides a powerful and concise modeling chain for a network structure will be introduce in this report. Mesh networks has a special topologic structure. The paper investigates a message transfer in wireless mesh network simulation and how does it works in cellular network simulation. Finally the experimental result gave us the information that mesh networks have different principle in transmission way with cellular networks in transmission, and multi...
Mesh generation in archipelagos
Terwisscha van Scheltinga, A.; Myers, P.G.; Pietrzak, J.D.
2012-01-01
A new mesh size field is presented that is specifically designed for efficient meshing of highly irregular oceanic domains: archipelagos. The new approach is based on the standard mesh size field that uses the proximity to the nearest coastline. Here, the proximities to the two nearest coastlines
Finite element mesh generation
Lo, Daniel SH
2014-01-01
Highlights the Progression of Meshing Technologies and Their ApplicationsFinite Element Mesh Generation provides a concise and comprehensive guide to the application of finite element mesh generation over 2D domains, curved surfaces, and 3D space. Organised according to the geometry and dimension of the problem domains, it develops from the basic meshing algorithms to the most advanced schemes to deal with problems with specific requirements such as boundary conformity, adaptive and anisotropic elements, shape qualities, and mesh optimization. It sets out the fundamentals of popular techniques
2015-01-01
With the advances in mobile computing technologies and the growth of the Net, mobile mesh networks are going through a set of important evolutionary steps. In this paper, we survey architectural aspects of mobile mesh networks and their use cases and deployment models. Also, we survey challenging areas of mobile mesh networks and describe our vision of promising mobile services. This paper presents a basic introductory material for Masters of Open Information Technologies Lab, interested in m...
Hydrodynamic simulations on a moving Voronoi mesh
Springel, Volker
2011-01-01
At the heart of any method for computational fluid dynamics lies the question of how the simulated fluid should be discretized. Traditionally, a fixed Eulerian mesh is often employed for this purpose, which in modern schemes may also be adaptively refined during a calculation. Particle-based methods on the other hand discretize the mass instead of the volume, yielding an approximately Lagrangian approach. It is also possible to achieve Lagrangian behavior in mesh-based methods if the mesh is allowed to move with the flow. However, such approaches have often been fraught with substantial problems related to the development of irregularity in the mesh topology. Here we describe a novel scheme that eliminates these weaknesses. It is based on a moving unstructured mesh defined by the Voronoi tessellation of a set of discrete points. The mesh is used to solve the hyperbolic conservation laws of ideal hydrodynamics with a finite volume approach, based on a second-order Godunov scheme with an exact Riemann solver. A...
Assignment of fields from particles to mesh
Duque, Daniel
2016-01-01
In Computational Fluid Dynamics there have been many attempts to combine the power of a fixed mesh on which to carry out spatial calculations with that of a set of particles that moves following the velocity field. These ideas indeed go back to Particle-in-Cell methods, proposed about 60 years ago. Of course, some procedure is needed to transfer field information between particles and mesh. There are many possible choices for this "assignment", or "projection". Several requirements may guide this choice. Two well-known ones are conservativity and stability, which apply to volume integrals of the fields. An additional one is here considered: preservation of information. This means that mesh interpolation, followed by mesh assignment, should leave the field values invariant. The resulting methods are termed "mass" assignments due to their strong similarities with the Finite Element Method. We test several procedures, including the well-known FLIP, on three scenarios: simple 1D convection, 2D convection of Zales...
Holst, Glendon
2016-12-01
Serial section electron microscopy (SSEM) image stacks generated using high throughput microscopy techniques are an integral tool for investigating brain connectivity and cell morphology. FIB or 3View scanning electron microscopes easily generate gigabytes of data. In order to produce analyzable 3D dataset from the imaged volumes, efficient and reliable image segmentation is crucial. Classical manual approaches to segmentation are time consuming and labour intensive. Semiautomatic seeded watershed segmentation algorithms, such as those implemented by ilastik image processing software, are a very powerful alternative, substantially speeding up segmentation times. We have used ilastik effectively for small EM stacks – on a laptop, no less; however, ilastik was unable to carve the large EM stacks we needed to segment because its memory requirements grew too large – even for the biggest workstations we had available. For this reason, we refactored the carving module of ilastik to scale it up to large EM stacks on large workstations, and tested its efficiency. We modified the carving module, building on existing blockwise processing functionality to process data in manageable chunks that can fit within RAM (main memory). We review this refactoring work, highlighting the software architecture, design choices, modifications, and issues encountered.
2011-11-01
triangles in two dimensions and tetrahedra ( tets ) in three dimensions. There are many other ways to discretize a region using unstructured meshes, but this...The boundary points associated with the airfoil surface were moved, but all of the interior points remained stationary , which resulted in a mesh
An Adaptive Mesh Algorithm: Mapping the Mesh Variables
Energy Technology Data Exchange (ETDEWEB)
Scannapieco, Anthony J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2016-07-25
Both thermodynamic and kinematic variables must be mapped. The kinematic variables are defined on a separate kinematic mesh; it is the duel mesh to the thermodynamic mesh. The map of the kinematic variables is done by calculating the contributions of kinematic variables on the old thermodynamic mesh, mapping the kinematic variable contributions onto the new thermodynamic mesh and then synthesizing the mapped kinematic variables on the new kinematic mesh. In this document the map of the thermodynamic variables will be described.
Pepple, Ken
2011-01-01
OpenStack was created with the audacious goal of being the ubiquitous software choice for building public and private cloud infrastructures. In just over a year, it's become the most talked-about project in open source. This concise book introduces OpenStack's general design and primary software components in detail, and shows you how to start using it to build cloud infrastructures. If you're a developer, technologist, or system administrator familiar with cloud offerings such as Rackspace Cloud or Amazon Web Services, Deploying OpenStack shows you how to obtain and deploy OpenStack softwar
Held, Gilbert
2005-01-01
Wireless mesh networking is a new technology that has the potential to revolutionize how we access the Internet and communicate with co-workers and friends. Wireless Mesh Networks examines the concept and explores its advantages over existing technologies. This book explores existing and future applications, and examines how some of the networking protocols operate.The text offers a detailed analysis of the significant problems affecting wireless mesh networking, including network scale issues, security, and radio frequency interference, and suggests actual and potential solutions for each pro
Mesh implants: An overview of crucial mesh parameters
Institute of Scientific and Technical Information of China (English)
Lei-Ming; Zhu; Philipp; Schuster; Uwe; Klinge
2015-01-01
Hernia repair is one of the most frequently performed surgical interventions that use mesh implants. This article evaluates crucial mesh parameters to facilitate selection of the most appropriate mesh implant, considering raw materials, mesh composition, structure parameters and mechanical parameters. A literature review was performed using the Pub Med database. The most important mesh parameters in the selection of a mesh implant are the raw material, structural parameters and mechanical parameters, which should match the physiological conditions. The structural parameters, especially the porosity, are the most important predictors of the biocompatibility performance of synthetic meshes. Meshes with large pores exhibit less inflammatory infiltrate, connective tissue and scar bridging, which allows increased soft tissue ingrowth. The raw material and combination of raw materials of the used mesh, including potential coatings and textile design, strongly impact the inflammatory reaction to the mesh. Synthetic meshes made from innovative polymers combined with surface coating have been demonstrated to exhibit advantageous behavior in specialized fields. Monofilament, largepore synthetic meshes exhibit advantages. The value of mesh classification based on mesh weight seems to be overestimated. Mechanical properties of meshes, such as anisotropy/isotropy, elasticity and tensile strength, are crucial parameters for predicting mesh performance after implantation.
28 Comparative Study of Open Mesh Repair and Desarda's No ...
African Journals Online (AJOL)
user
2006-12-02
Dec 2, 2006 ... East And Central African Journal of Surgery Volume 11 Number 2. ... new technique and the open mesh repair done in a district level general hospital set ... laparoscopic repairs or the patients given ..... Hernia repair (Open Vs.
Application-specific mesh-based heterogeneous FPGA architectures
Parvez, Husain
2011-01-01
This volume presents a new exploration environment for mesh-based, heterogeneous FPGA architectures. Readers will find a description of state-of-the-art techniques for reducing area requirements, which both increase performance and enable power reduction.
Image-Based Geometric Modeling and Mesh Generation
2013-01-01
As a new interdisciplinary research area, “image-based geometric modeling and mesh generation” integrates image processing, geometric modeling and mesh generation with finite element method (FEM) to solve problems in computational biomedicine, materials sciences and engineering. It is well known that FEM is currently well-developed and efficient, but mesh generation for complex geometries (e.g., the human body) still takes about 80% of the total analysis time and is the major obstacle to reduce the total computation time. It is mainly because none of the traditional approaches is sufficient to effectively construct finite element meshes for arbitrarily complicated domains, and generally a great deal of manual interaction is involved in mesh generation. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion,...
Bélanger, Marie-J.
The red mud slurry "stacking" method used in many Alcan Plants has been developed in the 1980's. The aim of this technique is to use minimum space for the disposal of the residue and to rapidly obtain consolidated material. The consistency of the mud slurry plays a key role in the steepness (angle) of the stacking slope.
Khedher, Omar
2015-01-01
This book is intended for system administrators, cloud engineers, and system architects who want to deploy a cloud based on OpenStack in a mid- to large-sized IT infrastructure. If you have a fundamental understanding of cloud computing and OpenStack and want to expand your knowledge, then this book is an excellent checkpoint to move forward.
Radez, Dan
2015-01-01
If you need to get started with OpenStack or want to learn more, then this book is your perfect companion. If you're comfortable with the Linux command line, you'll gain confidence in using OpenStack.
Botsch, Mario; Pauly, Mark; Alliez, Pierre; Levy, Bruno
2010-01-01
Geometry processing, or mesh processing, is a fast-growing area of research that uses concepts from applied mathematics, computer science, and engineering to design efficient algorithms for the acquisition, reconstruction, analysis, manipulation, simulation, and transmission of complex 3D models. Applications of geometry processing algorithms already cover a wide range of areas from multimedia, entertainment, and classical computer-aided design, to biomedical computing, reverse engineering, and scientific computing. Over the last several years, triangle meshes have become increasingly popular,
Geometrically Consistent Mesh Modification
Bonito, A.
2010-01-01
A new paradigm of adaptivity is to execute refinement, coarsening, and smoothing of meshes on manifolds with incomplete information about their geometry and yet preserve position and curvature accuracy. We refer to this collectively as geometrically consistent (GC) mesh modification. We discuss the concept of discrete GC, show the failure of naive approaches, and propose and analyze a simple algorithm that is GC and accuracy preserving. © 2010 Society for Industrial and Applied Mathematics.
Stacking with stochastic cooling
Energy Technology Data Exchange (ETDEWEB)
Caspers, Fritz E-mail: Fritz.Caspers@cern.ch; Moehl, Dieter
2004-10-11
Accumulation of large stacks of antiprotons or ions with the aid of stochastic cooling is more delicate than cooling a constant intensity beam. Basically the difficulty stems from the fact that the optimized gain and the cooling rate are inversely proportional to the number of particles 'seen' by the cooling system. Therefore, to maintain fast stacking, the newly injected batch has to be strongly 'protected' from the Schottky noise of the stack. Vice versa the stack has to be efficiently 'shielded' against the high gain cooling system for the injected beam. In the antiproton accumulators with stacking ratios up to 10{sup 5} the problem is solved by radial separation of the injection and the stack orbits in a region of large dispersion. An array of several tapered cooling systems with a matched gain profile provides a continuous particle flux towards the high-density stack core. Shielding of the different systems from each other is obtained both through the spatial separation and via the revolution frequencies (filters). In the 'old AA', where the antiproton collection and stacking was done in one single ring, the injected beam was further shielded during cooling by means of a movable shutter. The complexity of these systems is very high. For more modest stacking ratios, one might use azimuthal rather than radial separation of stack and injected beam. Schematically half of the circumference would be used to accept and cool new beam and the remainder to house the stack. Fast gating is then required between the high gain cooling of the injected beam and the low gain stack cooling. RF-gymnastics are used to merge the pre-cooled batch with the stack, to re-create free space for the next injection, and to capture the new batch. This scheme is less demanding for the storage ring lattice, but at the expense of some reduction in stacking rate. The talk reviews the 'radial' separation schemes and also gives some
2015-01-07
Mesh Generation. Lecture Notes in Computational Vision and Biomechanics , Volume 3. Springer Publisher. Editor: Yongjie (Jessica) Zhang. ISBN-10...Modeling and Mesh Generation. Lecture Notes in Computational Vision and Biomechanics , Volume 3. Springer Publisher. Editor: Yongjie (Jessica) Zhang... Biomechanics , Volume 3. Springer Publisher. Editor: Yongjie (Jessica) Zhang. ISBN-10: 9400742541, ISBN-13: 978-9400742543. 2013. 3. Y. Zhang. Challenges
Hex-dominant mesh generation using 3D constrained triangulation
Energy Technology Data Exchange (ETDEWEB)
OWEN,STEVEN J.
2000-05-30
A method for decomposing a volume with a prescribed quadrilateral surface mesh, into a hexahedral-dominated mesh is proposed. With this method, known as Hex-Morphing (H-Morph), an initial tetrahedral mesh is provided. Tetrahedral are transformed and combined starting from the boundary and working towards the interior of the volume. The quadrilateral faces of the hexahedra are treated as internal surfaces, which can be recovered using constrained triangulation techniques. Implementation details of the edge and face recovery process are included. Examples and performance of the H-Morph algorithm are also presented.
Stacking with Stochastic Cooling
Caspers, Friedhelm
2004-01-01
Accumulation of large stacks of antiprotons or ions with the aid of stochastic cooling is more delicate than cooling a constant intensity beam. Basically the difficulty stems from the fact that the optimized gain and the cooling rate are inversely proportional to the number of particles seen by the cooling system. Therefore, to maintain fast stacking, the newly injected batch has to be strongly protected from the Schottky noise of the stack. Vice versa the stack has to be efficiently shielded against the high gain cooling system for the injected beam. In the antiproton accumulators with stacking ratios up to 105, the problem is solved by radial separation of the injection and the stack orbits in a region of large dispersion. An array of several tapered cooling systems with a matched gain profile provides a continuous particle flux towards the high-density stack core. Shielding of the different systems from each other is obtained both through the spatial separation and via the revolution frequencies (filters)....
Olsson, Martin
2016-01-01
This book is an introduction to the theory of algebraic spaces and stacks intended for graduate students and researchers familiar with algebraic geometry at the level of a first-year graduate course. The first several chapters are devoted to background material including chapters on Grothendieck topologies, descent, and fibered categories. Following this, the theory of algebraic spaces and stacks is developed. The last three chapters discuss more advanced topics including the Keel-Mori theorem on the existence of coarse moduli spaces, gerbes and Brauer groups, and various moduli stacks of curv
Energy Technology Data Exchange (ETDEWEB)
Reyes Lopez, Y.; Yervilla Herrera, H.; Viamontes Esquivel, A.; Recarey Morfa, C. A.
2009-07-01
In the following paper we developed a new method to interpolate large volumes of scattered data, focused mainly on the results of the Mesh free Methods, Points Methods and the Particles Methods application. Through this one, we use local radial basis function as interpolating functions. We also use over-tree as the data structure that allows to accelerate the localization of the data that influences to interpolate the values at a new point, speeding up the application of scientific visualization techniques to generate images from large data volumes from the application of Mesh-free Methods, Points and Particle Methods, in the resolution of diverse models of physics-mathematics. As an example, the results obtained after applying this method using the local interpolation functions of Shepard are shown. (Author) 22 refs.
Conservative interpolation between general spherical meshes
Directory of Open Access Journals (Sweden)
E. Kritsikis
2015-06-01
Full Text Available An efficient, local, explicit, second-order, conservative interpolation algorithm between spherical meshes is presented. The cells composing the source and target meshes may be either spherical polygons or longitude–latitude quadrilaterals. Second-order accuracy is obtained by piecewise-linear finite volume reconstruction over the source mesh. Global conservation is achieved through the introduction of a supermesh, whose cells are all possible intersections of source and target cells. Areas and intersections are computed exactly to yield a geometrically exact method. The main efficiency bottleneck caused by the construction of the supermesh is overcome by adopting tree-based data structures and algorithms, from which the mesh connectivity can also be deduced efficiently. The theoretical second-order accuracy is verified using a smooth test function and pairs of meshes commonly used for atmospheric modelling. Experiments confirm that the most expensive operations, especially the supermesh construction, have O(NlogN computational cost. The method presented is meant to be incorporated in pre- or post-processing atmospheric modelling pipelines, or directly into models for flexible input/output. It could also serve as a basis for conservative coupling between model components, e.g. atmosphere and ocean.
Conservative interpolation between general spherical meshes
Kritsikis, Evaggelos; Aechtner, Matthias; Meurdesoif, Yann; Dubos, Thomas
2017-01-01
An efficient, local, explicit, second-order, conservative interpolation algorithm between spherical meshes is presented. The cells composing the source and target meshes may be either spherical polygons or latitude-longitude quadrilaterals. Second-order accuracy is obtained by piece-wise linear finite-volume reconstruction over the source mesh. Global conservation is achieved through the introduction of a supermesh, whose cells are all possible intersections of source and target cells. Areas and intersections are computed exactly to yield a geometrically exact method. The main efficiency bottleneck caused by the construction of the supermesh is overcome by adopting tree-based data structures and algorithms, from which the mesh connectivity can also be deduced efficiently.The theoretical second-order accuracy is verified using a smooth test function and pairs of meshes commonly used for atmospheric modelling. Experiments confirm that the most expensive operations, especially the supermesh construction, have O(NlogN) computational cost. The method presented is meant to be incorporated in pre- or post-processing atmospheric modelling pipelines, or directly into models for flexible input/output. It could also serve as a basis for conservative coupling between model components, e.g., atmosphere and ocean.
Yield and Cost Analysis or 3D Stacked ICs
Taouil, M.
2014-01-01
3D stacking is an emerging technology promising many benefits such as low latency between stacked dies, reduced power consumption, high bandwidth communication, improved form factor and package volume density, heterogeneous integration, and low-cost manufacturing. However, it requires modification o
Cognitive Protocol Stack Design
2015-12-30
directly related to the protocol stack, e.g., environmental or positioning data) that can be exploited to design and test novel cognitive networking ...quality of service (QoS) is challenging. Currently, 5G technologies are being developed to answer the need for further increasing network capacity, and...SECURITY CLASSIFICATION OF: In the ARO “Cognitive Protocol Stack Design" project we proposed cognitive networking solutions published in international
Triangulated manifold meshing method preserving molecular surface topology.
Chen, Minxin; Tu, Bin; Lu, Benzhuo
2012-09-01
Generation of manifold mesh is an urgent issue in mathematical simulations of biomolecule using boundary element methods (BEM) or finite element method (FEM). Defects, such as not closed mesh, intersection of elements and missing of small structures, exist in surface meshes generated by most of the current meshing method. Usually the molecular surface meshes produced by existing methods need to be revised carefully by third party software to ensure the surface represents a continuous manifold before being used in a BEM and FEM calculations. Based on the trace technique proposed in our previous work, in this paper, we present an improved meshing method to avoid intersections and preserve the topology of the molecular Gaussian surface. The new method divides the whole Gaussian surface into single valued pieces along each of x, y, z directions by tracing the extreme points along the fold curves on the surface. Numerical test results show that the surface meshes produced by the new method are manifolds and preserve surface topologies. The result surface mesh can also be directly used in surface conforming volume mesh generation for FEM type simulation. Copyright © 2012 Elsevier Inc. All rights reserved.
Documentation for MeshKit - Reactor Geometry (&mesh) Generator
Energy Technology Data Exchange (ETDEWEB)
Jain, Rajeev [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay [Argonne National Lab. (ANL), Argonne, IL (United States)
2015-09-30
This report gives documentation for using MeshKit’s Reactor Geometry (and mesh) Generator (RGG) GUI and also briefly documents other algorithms and tools available in MeshKit. RGG is a program designed to aid in modeling and meshing of complex/large hexagonal and rectilinear reactor cores. RGG uses Argonne’s SIGMA interfaces, Qt and VTK to produce an intuitive user interface. By integrating a 3D view of the reactor with the meshing tools and combining them into one user interface, RGG streamlines the task of preparing a simulation mesh and enables real-time feedback that reduces accidental scripting mistakes that could waste hours of meshing. RGG interfaces with MeshKit tools to consolidate the meshing process, meaning that going from model to mesh is as easy as a button click. This report is designed to explain RGG v 2.0 interface and provide users with the knowledge and skills to pilot RGG successfully. Brief documentation of MeshKit source code, tools and other algorithms available are also presented for developers to extend and add new algorithms to MeshKit. RGG tools work in serial and parallel and have been used to model complex reactor core models consisting of conical pins, load pads, several thousands of axially varying material properties of instrumentation pins and other interstices meshes.
Gill, S P D; Gibson, B K; Flynn, C; Ibata, R A; Lewis, G F; Gill, Stuart P.D.; Knebe, Alexander; Gibson, Brad K.; Flynn, Chris; Ibata, Rodrigo A.; Lewis, Geraint F.
2002-01-01
An adaptive multi grid approach to simulating the formation of structure from collisionless dark matter is described. MLAPM (Multi-Level Adaptive Particle Mesh) is one of the most efficient serial codes available on the cosmological 'market' today. As part of Swinburne University's role in the development of the Square Kilometer Array, we are implementing hydrodynamics, feedback, and radiative transfer within the MLAPM adaptive mesh, in order to simulate baryonic processes relevant to the interstellar and intergalactic media at high redshift. We will outline our progress to date in applying the existing MLAPM to a study of the decay of satellite galaxies within massive host potentials.
Isotopic Implicit Surface Meshing
Boissonnat, Jean-Daniel; Cohen-Steiner, David; Vegter, Gert
2004-01-01
This paper addresses the problem of piecewise linear approximation of implicit surfaces. We first give a criterion ensuring that the zero-set of a smooth function and the one of a piecewise linear approximation of it are isotopic. Then, we deduce from this criterion an implicit surface meshing algor
Stacking of SKA data: comparing uv-plane and image-plane stacking
Knudsen, K K; Vlemmings, W; Conway, J; Marti-Vidal, I
2015-01-01
Stacking as a tool for studying objects that are not individually detected is becoming popular even for radio interferometric data, and will be widely used in the SKA era. Stacking is typically done using imaged data rather than directly using the visibilities (the uv-data). We have investigated and developed a novel algorithm to do stacking using the uv-data. We have performed exten- sive simulations comparing to image-stacking, and summarize the results of these simulations. Furthermore, we disuss the implications in light of the vast data volume produced by the SKA. Having access to the uv-stacked data provides a great advantage, as it allows the possibility to properly analyse the result with respect to calibration artifacts as well as source properties such as size. For SKA the main challenge lies in archiving the uv-data. For purposes of robust stacking analysis, it would be strongly desirable to either keep the calibrated uv-data at least in an aver- age form, or implement a stacking queue where stacki...
Advanced Automatic Hexahedral Mesh Generation from Surface Quad Meshes
Kremer, Michael; Bommes, David; Lim, Isaak; Kobbelt, Leif
2013-01-01
International audience; A purely topological approach for the generation of hexahedral meshes from quadrilateral surface meshes of genus zero has been proposed by M. MÃ¼ller-Hannemann: in a first stage, the input surface mesh is reduced to a single hexahedron by successively eliminating loops from the dual graph of the quad mesh; in the second stage, the hexahedral mesh is constructed by extruding a layer of hexahedra for each dual loop from the first stage in reverse elimination order. In th...
Energy Technology Data Exchange (ETDEWEB)
Porter, Reid B [Los Alamos National Laboratory; Hush, Don [Los Alamos National Laboratory
2009-01-01
Just as linear models generalize the sample mean and weighted average, weighted order statistic models generalize the sample median and weighted median. This analogy can be continued informally to generalized additive modeels in the case of the mean, and Stack Filters in the case of the median. Both of these model classes have been extensively studied for signal and image processing but it is surprising to find that for pattern classification, their treatment has been significantly one sided. Generalized additive models are now a major tool in pattern classification and many different learning algorithms have been developed to fit model parameters to finite data. However Stack Filters remain largely confined to signal and image processing and learning algorithms for classification are yet to be seen. This paper is a step towards Stack Filter Classifiers and it shows that the approach is interesting from both a theoretical and a practical perspective.
Stacked antiaromatic porphyrins
Nozawa, Ryo; Tanaka, Hiroko; Cha, Won-Young; Hong, Yongseok; Hisaki, Ichiro; Shimizu, Soji; Shin, Ji-Young; Kowalczyk, Tim; Irle, Stephan; Kim, Dongho; Shinokubo, Hiroshi
2016-11-01
Aromaticity is a key concept in organic chemistry. Even though this concept has already been theoretically extrapolated to three dimensions, it usually still remains restricted to planar molecules in organic chemistry textbooks. Stacking of antiaromatic π-systems has been proposed to induce three-dimensional aromaticity as a result of strong frontier orbital interactions. However, experimental evidence to support this prediction still remains elusive so far. Here we report that close stacking of antiaromatic porphyrins diminishes their inherent antiaromaticity in the solid state as well as in solution. The antiaromatic stacking furthermore allows a delocalization of the π-electrons, which enhances the two-photon absorption cross-section values of the antiaromatic porphyrins. This feature enables the dynamic switching of the non-linear optical properties by controlling the arrangement of antiaromatic π-systems on the basis of intermolecular orbital interactions.
Laparoscopic sacrocolpopexy versus transvaginal mesh for recurrent pelvic organ prolapse.
Iglesia, Cheryl B; Hale, Douglass S; Lucente, Vincent R
2013-03-01
Both expert surgeons agree with the following: (1) Surgical mesh, whether placed laparoscopically or transvaginally, is indicated for pelvic floor reconstruction in cases involving recurrent advanced pelvic organ prolapse. (2) Procedural expertise and experience gained from performing a high volume of cases is fundamentally necessary. Knowledge of outcomes and complications from an individual surgeon's audit of cases is also needed when discussing the risks and benefits of procedures and alternatives. Yet controversy still exists on how best to teach new surgical techniques and optimal ways to efficiently track outcomes, including subjective and objective cure of prolapse as well as perioperative complications. A mesh registry will be useful in providing data needed for surgeons. Cost factors are also a consideration since laparoscopic and especially robotic surgical mesh procedures are generally more costly than transvaginal mesh kits when operative time, extra instrumentation and length of stay are included. Long-term outcomes, particularly for transvaginal mesh procedures, are lacking. In conclusion, all surgery poses risks; however, patients should be made aware of the pros and cons of various routes of surgery as well as the potential risks and benefits of using mesh. Surgeons should provide patients with honest information about their own experience implanting mesh and also their experience dealing with mesh-related complications.
An unstructured-mesh atmospheric model for nonhydrostatic dynamics
Smolarkiewicz, Piotr K.; Szmelter, Joanna; Wyszogrodzki, Andrzej A.
2013-12-01
A three-dimensional semi-implicit edge-based unstructured-mesh model is developed that integrates nonhydrostatic anelastic equations, suitable for simulation of small-to-mesoscale atmospheric flows. The model builds on nonoscillatory forward-in-time MPDATA approach using finite-volume discretization and admitting unstructured meshes with arbitrarily shaped cells. The numerical advancements are evaluated with canonical simulations of convective planetary boundary layer and strongly (stably) stratified orographic flows, epitomizing diverse aspects of highly nonlinear nonhydrostatic dynamics. The unstructured-mesh solutions are compared to equivalent results generated with an established structured-grid model and observation.
Layer-adapted meshes for reaction-convection-diffusion problems
Linß, Torsten
2010-01-01
This book on numerical methods for singular perturbation problems - in particular, stationary reaction-convection-diffusion problems exhibiting layer behaviour is devoted to the construction and analysis of layer-adapted meshes underlying these numerical methods. A classification and a survey of layer-adapted meshes for reaction-convection-diffusion problems are included. This structured and comprehensive account of current ideas in the numerical analysis for various methods on layer-adapted meshes is addressed to researchers in finite element theory and perturbation problems. Finite differences, finite elements and finite volumes are all covered.
Multiphase flow of immiscible fluids on unstructured moving meshes
DEFF Research Database (Denmark)
Misztal, Marek Krzysztof; Erleben, Kenny; Bargteil, Adam;
2012-01-01
In this paper, we present a method for animating multiphase flow of immiscible fluids using unstructured moving meshes. Our underlying discretization is an unstructured tetrahedral mesh, the deformable simplicial complex (DSC), that moves with the flow in a Lagrangian manner. Mesh optimization...... that the underlying discretization matches the physics and avoids the additional book-keeping required in grid-based methods where multiple fluids may occupy the same cell. Our Lagrangian approach naturally leads us to adopt a finite element approach to simulation, in contrast to the finite volume approaches adopted...
Efficient Packet Forwarding in Mesh Network
Soumen Kanrar
2012-01-01
Wireless Mesh Network (WMN) is a multi hop low cost, with easy maintenance robust network providing reliable service coverage. WMNs consist of mesh routers and mesh clients. In this architecture, while static mesh routers form the wireless backbone, mesh clients access the network through mesh routers as well as directly meshing with each other. Different from traditional wireless networks, WMN is dynamically self-organized and self-configured. In other words, the nodes in the mesh network au...
Tang, Zhao; Wei, Qingshan; Wei, Alexander
2011-12-01
Metal-mesh lithography (MML) is a practical hybrid of microcontact printing and capillary force lithography that can be applied over millimeter-sized areas with a high level of uniformity. MML can be achieved by blotting various inks onto substrates through thin copper grids, relying on preferential wetting and capillary interactions between template and substrate for pattern replication. The resulting mesh patterns, which are inverted relative to those produced by stenciling or serigraphy, can be reproduced with low micrometer resolution. MML can be combined with other surface chemistry and lift-off methods to create functional microarrays for diverse applications, such as periodic islands of gold nanorods and patterned corrals for fibroblast cell cultures.
Open Volumetric Mesh-An Efficient Data Structure for Tetrahedral and Hexa-hedral Meshes
Institute of Scientific and Technical Information of China (English)
XIAN Chu-hua; LI Gui-qing; GAO Shu-ming
2013-01-01
This work introduces a scalable and efficient topological structure for tetrahedral and hexahedral meshes. The design of the data structure aims at maximal flexibility and high performance. It provides a high scalability by using hierarchical representa-tions of topological elements. The proposed data structure is array-based, and it is a compact representation of the half-edge data structure for volume elements and half-face data structure for volumetric meshes. This guarantees constant access time to the neighbors of the topological elements. In addition, an open-source implementation named Open Volumetric Mesh (OVM) of the pro-posed data structure is written in C++using generic programming concepts.
Functionalized Nanofiber Meshes Enhance Immunosorbent Assays.
Hersey, Joseph S; Meller, Amit; Grinstaff, Mark W
2015-12-01
Three-dimensional substrates with high surface-to-volume ratios and subsequently large protein binding capacities are of interest for advanced immunosorbent assays utilizing integrated microfluidics and nanosensing elements. A library of bioactive and antifouling electrospun nanofiber substrates, which are composed of high-molecular-weight poly(oxanorbornene) derivatives, is described. Specifically, a set of copolymers are synthesized from three 7-oxanorbornene monomers to create a set of water insoluble copolymers with both biotin (bioactive) and triethylene glycol (TEG) (antifouling) functionality. Porous three-dimensional nanofiber meshes are electrospun from these copolymers with the ability to specifically bind streptavidin while minimizing the nonspecific binding of other proteins. Fluorescently labeled streptavidin is used to quantify the streptavidin binding capacity of each mesh type through confocal microscopy. A simplified enzyme-linked immunosorbent assay (ELISA) is presented to assess the protein binding capabilities and detection limits of these nanofiber meshes under both static conditions (26 h) and flow conditions (1 h) for a model target protein (i.e., mouse IgG) using a horseradish peroxidase (HRP) colorimetric assay. Bioactive and antifouling nanofiber meshes outperform traditional streptavidin-coated polystyrene plates under flow, validating their use in future advanced immunosorbent assays and their compatibility with microfluidic-based biosensors.
DEFF Research Database (Denmark)
2009-01-01
po_stack® er et reolsystem, hvis enkle elementer giver stor flexibilitet, variation og skulpturel virkning. Elementerne stables og forskydes frit, så reolens rum kan vendes til begge sider, være åbne eller lukkede og farvekombineres ubegrænset. Reolen kan let ombygges, udvides eller opdeles, når ...
Myers, Colton
2015-01-01
If you are a system administrator who manages multiple servers, then you know how difficult it is to keep your infrastructure in line. If you've been searching for an easier way, this book is for you. No prior experience with SaltStack is required.
2005-07-01
a constant factor of K + 2. (To see this, note sequential stacking requires training K+2 classifiers: the classifiers f1, . . . , fK used in cross...on the non- sequential learners (ME and VP) but improves per- formance of the sequential learners (CRFs and VPH - MMs) less consistently. This pattern
2013-01-01
Stephen Wolfram gives a personal account of his vision for the "Wolfram technology stack" and how it developed, starting with his work in particle physics. The talk was presented at the 2013 ROOT Users' Meeting and followed a talk, earlier in the day, on "Mathematica with ROOT".
Mesh Algorithms for PDE with Sieve I: Mesh Distribution
Directory of Open Access Journals (Sweden)
Matthew G. Knepley
2009-01-01
Full Text Available We have developed a new programming framework, called Sieve, to support parallel numerical partial differential equation(s (PDE algorithms operating over distributed meshes. We have also developed a reference implementation of Sieve in C++ as a library of generic algorithms operating on distributed containers conforming to the Sieve interface. Sieve makes instances of the incidence relation, or arrows, the conceptual first-class objects represented in the containers. Further, generic algorithms acting on this arrow container are systematically used to provide natural geometric operations on the topology and also, through duality, on the data. Finally, coverings and duality are used to encode not only individual meshes, but all types of hierarchies underlying PDE data structures, including multigrid and mesh partitions. In order to demonstrate the usefulness of the framework, we show how the mesh partition data can be represented and manipulated using the same fundamental mechanisms used to represent meshes. We present the complete description of an algorithm to encode a mesh partition and then distribute a mesh, which is independent of the mesh dimension, element shape, or embedding. Moreover, data associated with the mesh can be similarly distributed with exactly the same algorithm. The use of a high level of abstraction within the Sieve leads to several benefits in terms of code reuse, simplicity, and extensibility. We discuss these benefits and compare our approach to other existing mesh libraries.
Energy Technology Data Exchange (ETDEWEB)
Vieira, Jose W.; Lopes Filho, Ferdinand J., E-mail: jose.wilson@recife.ifpe.edu.br [Instituto Federal de Educacao e Tecnologia de Pernambuco (IFPE) Recife, PE (Brazil); Vieira, Igor F., E-mail: igoradiologia@gmail.com [Universidade Federal de Pernambuco (DEN/UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear; Lima, Fernando R.A.; Cordeiro, Landerson P., E-mail: leoxofisico@gmail.com, E-mail: falima@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-NE), Recife, PE (Brazil)
2014-07-01
This work demonstrated step by step how to segment color images of the chest of an adult in order to separate the tumor volume without significantly changing the values of the components R (Red), G (Green) and B (blue) of the colors of the pixels. For having information which allow to build color map you need to segment and classify the colors present at appropriate intervals in images. The used segmentation technique is to select a small rectangle with color samples in a given region and then erase with a specific color called 'rubber' the other regions of image. The tumor region was segmented into one of the images available and the procedure is displayed in tutorial format. All necessary computational tools have been implemented in DIP (Digital Image Processing), software developed by the authors. The results obtained, in addition to permitting the construction the colorful map of the distribution of the concentration of activity in PET images will also be useful in future work to enter tumors in voxel phantoms in order to perform dosimetric assessments.
Robust, multidimensional mesh motion based on Monge-Kantorovich equidistribution
Energy Technology Data Exchange (ETDEWEB)
Delzanno, G L [Los Alamos National Laboratory; Finn, J M [Los Alamos National Laboratory
2009-01-01
Mesh-motion (r-refinement) grid adaptivity schemes are attractive due to their potential to minimize the numerical error for a prescribed number of degrees of freedom. However, a key roadblock to a widespread deployment of the technique has been the formulation of robust, reliable mesh motion governing principles, which (1) guarantee a solution in multiple dimensions (2D and 3D), (2) avoid grid tangling (or folding of the mesh, whereby edges of a grid cell cross somewhere in the domain), and (3) can be solved effectively and efficiently. In this study, we formulate such a mesh-motion governing principle, based on volume equidistribution via Monge-Kantorovich optimization (MK). In earlier publications [1, 2], the advantages of this approach in regards to these points have been demonstrated for the time-independent case. In this study, demonstrate that Monge-Kantorovich equidistribution can in fact be used effectively in a time stepping context, and delivers an elegant solution to the otherwise pervasive problem of grid tangling in mesh motion approaches, without resorting to ad-hoc time-dependent terms (as in moving-mesh PDEs, or MMPDEs [3, 4]). We explore two distinct r-refinement implementations of MK: direct, where the current mesh relates to an initial, unchanging mesh, and sequential, where the current mesh is related to the previous one in time. We demonstrate that the direct approach is superior in regards to mesh distortion and robustness. The properties of the approach are illustrated with a paradigmatic hyperbolic PDE, the advection of a passive scalar. Imposed velocity flow fields or varying vorticity levels and flow shears are considered.
Locati, Fabio Alessandro
2015-01-01
If you are an OpenStack administrator or developer, or wish to build solutions to protect your OpenStack environment, then this book is for you. Experience of Linux administration and familiarity with different OpenStack components is assumed.
1975-04-01
AD-A009 587 FUEL CELL STACKS Bernard S. Baker Energy Research Corporation Prepared for: Army Mobility Equipment Research and Development Center April... Mobility Equipment Research and Development Center Unclassified For- Belvoir, Virginia 22060 [15. DE.CLASSIFICATION/L.TWNOGRADING SCREOUJLE 16...the majority of effort has been directed at translating technoilogy for small comn- ponent manufacture on a laboratory scale into large size components
toolkit computational mesh conceptual model.
Energy Technology Data Exchange (ETDEWEB)
Baur, David G.; Edwards, Harold Carter; Cochran, William K.; Williams, Alan B.; Sjaardema, Gregory D.
2010-03-01
The Sierra Toolkit computational mesh is a software library intended to support massively parallel multi-physics computations on dynamically changing unstructured meshes. This domain of intended use is inherently complex due to distributed memory parallelism, parallel scalability, heterogeneity of physics, heterogeneous discretization of an unstructured mesh, and runtime adaptation of the mesh. Management of this inherent complexity begins with a conceptual analysis and modeling of this domain of intended use; i.e., development of a domain model. The Sierra Toolkit computational mesh software library is designed and implemented based upon this domain model. Software developers using, maintaining, or extending the Sierra Toolkit computational mesh library must be familiar with the concepts/domain model presented in this report.
Sibeyn, J.; Rao, P; Juurlink, B.
1996-01-01
Algorithms for performing gossiping on one- and higher dimensional meshes are presented. As a routing model, we assume the practically important worm-hole routing. For one-dimensional arrays and rings, we give a novel lower bound and an asymptotically optimal gossiping algorithm for all choices of the parameters involved. For two-dimensional meshes and tori, several simple algorithms composed of one-dimensional phases are presented. For an important range of packet and mesh sizes it gives cle...
An Adaptive Mesh Algorithm: Mesh Structure and Generation
Energy Technology Data Exchange (ETDEWEB)
Scannapieco, Anthony J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2016-06-21
The purpose of Adaptive Mesh Refinement is to minimize spatial errors over the computational space not to minimize the number of computational elements. The additional result of the technique is that it may reduce the number of computational elements needed to retain a given level of spatial accuracy. Adaptive mesh refinement is a computational technique used to dynamically select, over a region of space, a set of computational elements designed to minimize spatial error in the computational model of a physical process. The fundamental idea is to increase the mesh resolution in regions where the physical variables are represented by a broad spectrum of modes in k-space, hence increasing the effective global spectral coverage of those physical variables. In addition, the selection of the spatially distributed elements is done dynamically by cyclically adjusting the mesh to follow the spectral evolution of the system. Over the years three types of AMR schemes have evolved; block, patch and locally refined AMR. In block and patch AMR logical blocks of various grid sizes are overlaid to span the physical space of interest, whereas in locally refined AMR no logical blocks are employed but locally nested mesh levels are used to span the physical space. The distinction between block and patch AMR is that in block AMR the original blocks refine and coarsen entirely in time, whereas in patch AMR the patches change location and zone size with time. The type of AMR described herein is a locally refi ned AMR. In the algorithm described, at any point in physical space only one zone exists at whatever level of mesh that is appropriate for that physical location. The dynamic creation of a locally refi ned computational mesh is made practical by a judicious selection of mesh rules. With these rules the mesh is evolved via a mesh potential designed to concentrate the nest mesh in regions where the physics is modally dense, and coarsen zones in regions where the physics is modally
Synthesized Optimization of Triangular Mesh
Institute of Scientific and Technical Information of China (English)
HU Wenqiang; YANG Wenyu
2006-01-01
Triangular mesh is often used to describe geometric object as computed model in digital manufacture, thus the mesh model with both uniform triangular shape and excellent geometric shape is expected. But in fact, the optimization of triangular shape often is contrary with that of geometric shape. In this paper, one synthesized optimizing algorithm is presented through subdividing triangles to achieve the trade-off solution between the geometric and triangular shape optimization of mesh model. The result mesh with uniform triangular shape and excellent topology are obtained.
Form-finding with polyhedral meshes made simple
Tang, Chengcheng
2014-07-27
We solve the form-finding problem for polyhedral meshes in a way which combines form, function and fabrication; taking care of user-specified constraints like boundary interpolation, planarity of faces, statics, panel size and shape, enclosed volume, and last, but not least, cost. Our main application is the interactive modeling of meshes for architectural and industrial design. Our approach can be described as guided exploration of the constraint space whose algebraic structure is simplified by introducing auxiliary variables and ensuring that constraints are at most quadratic. Computationally, we perform a projection onto the constraint space which is biased towards low values of an energy which expresses desirable "soft" properties like fairness. We have created a tool which elegantly handles difficult tasks, such as taking boundary-alignment of polyhedral meshes into account, planarization, fairing under planarity side conditions, handling hybrid meshes, and extending the treatment of static equilibrium to shapes which possess overhanging parts.
Quality Tetrahedral Mesh Smoothing via Boundary-Optimized Delaunay Triangulation.
Gao, Zhanheng; Yu, Zeyun; Holst, Michael
2012-12-01
Despite its great success in improving the quality of a tetrahedral mesh, the original optimal Delaunay triangulation (ODT) is designed to move only inner vertices and thus cannot handle input meshes containing "bad" triangles on boundaries. In the current work, we present an integrated approach called boundary-optimized Delaunay triangulation (B-ODT) to smooth (improve) a tetrahedral mesh. In our method, both inner and boundary vertices are repositioned by analytically minimizing the error between a paraboloid function and its piecewise linear interpolation over the neighborhood of each vertex. In addition to the guaranteed volume-preserving property, the proposed algorithm can be readily adapted to preserve sharp features in the original mesh. A number of experiments are included to demonstrate the performance of our method.
Mesh Algorithms for PDE with Sieve I: Mesh Distribution
Knepley, Matthew G
2009-01-01
We have developed a new programming framework, called Sieve, to support parallel numerical PDE algorithms operating over distributed meshes. We have also developed a reference implementation of Sieve in C++ as a library of generic algorithms operating on distributed containers conforming to the Sieve interface. Sieve makes instances of the incidence relation, or \\emph{arrows}, the conceptual first-class objects represented in the containers. Further, generic algorithms acting on this arrow container are systematically used to provide natural geometric operations on the topology and also, through duality, on the data. Finally, coverings and duality are used to encode not only individual meshes, but all types of hierarchies underlying PDE data structures, including multigrid and mesh partitions. In order to demonstrate the usefulness of the framework, we show how the mesh partition data can be represented and manipulated using the same fundamental mechanisms used to represent meshes. We present the complete des...
Prevention of Adhesion to Prosthetic Mesh
van ’t Riet, Martijne; de Vos van Steenwijk, Peggy J.; Bonthuis, Fred; Marquet, Richard L.; Steyerberg, Ewout W.; Jeekel, Johannes; Bonjer, H. Jaap
2003-01-01
Objective To assess whether use of antiadhesive liquids or coatings could prevent adhesion formation to prosthetic mesh. Summary Background Data Incisional hernia repair frequently involves the use of prosthetic mesh. However, concern exists about development of adhesions between viscera and the mesh, predisposing to intestinal obstruction or enterocutaneous fistulas. Methods In 91 rats, a defect in the muscular abdominal wall was created, and mesh was fixed intraperitoneally to cover the defect. Rats were divided in five groups: polypropylene mesh only (control group), addition of Sepracoat or Icodextrin solution to polypropylene mesh, Sepramesh (polypropylene mesh with Seprafilm coating), and Parietex composite mesh (polyester mesh with collagen coating). Seven and 30 days postoperatively, adhesions were assessed and wound healing was studied by microscopy. Results Intraperitoneal placement of polypropylene mesh was followed by bowel adhesions to the mesh in 50% of the cases. A mean of 74% of the mesh surface was covered by adhesions after 7 days, and 48% after 30 days. Administration of Sepracoat or Icodextrin solution had no influence on adhesion formation. Coated meshes (Sepramesh and Parietex composite mesh) had no bowel adhesions. Sepramesh was associated with a significant reduction of the mesh surface covered by adhesions after 7 and 30 days. Infection was more prevalent with Parietex composite mesh, with concurrent increased mesh surface covered by adhesions after 30 days (78%). Conclusions Sepramesh significantly reduced mesh surface covered by adhesions and prevented bowel adhesion to the mesh. Parietex composite mesh prevented bowel adhesions as well but increased infection rates in the current model. PMID:12496539
Risk Factors for Mesh Exposure after Transvaginal Mesh Surgery
Institute of Scientific and Technical Information of China (English)
Ke Niu; Yong-Xian Lu; Wen-Jie Shen; Ying-Hui Zhang; Wen-Ying Wang
2016-01-01
Background:Mesh exposure after surgery continues to be a clinical challenge for urogynecological surgeons.The purpose of this study was to explore the risk factors for polypropylene (PP) mesh exposure after transvaginal mesh (TVM) surgery.Methods:This study included 195 patients with advanced pelvic organ prolapse (POP),who underwent TVM from January 2004to December 2012 at the First Affiliated Hospital of Chinese PLA General Hospital.Clinical data were evaluated including patient's demography,TVM type,concomitant procedures,operation time,blood loss,postoperative morbidity,and mesh exposure.Mesh exposure was identified through postoperative vaginal examination.Statistical analysis was performed to identify risk factors for mesh exposure.Results:Two-hundred and nine transvaginal PP meshes were placed,including 194 in the anterior wall and 15 in the posterior wall.Concomitant tension-free vaginal tape was performed in 61 cases.The mean follow-up time was 35.1 ± 23.6 months.PP mesh exposure was identified in 32 cases (16.4％),with 31 in the anterior wall and 1 in the posterior wall.Significant difference was found in operating time and concomitant procedures between exposed and nonexposed groups (F =7.443,P =0.007;F =4.307,P =0.039,respectively).Binary logistic regression revealed that the number of concomitant procedures and operation time were risk factors for mesh exposure (P =0.001,P =0.043).Conclusion:Concomitant procedures and increased operating time increase the risk for postoperative mesh exposure in patients undergoing TVM surgery for POP.
Stack Caching Using Split Data Caches
DEFF Research Database (Denmark)
Nielsen, Carsten; Schoeberl, Martin
2015-01-01
In most embedded and general purpose architectures, stack data and non-stack data is cached together, meaning that writing to or loading from the stack may expel non-stack data from the data cache. Manipulation of the stack has a different memory access pattern than that of non-stack data, showin...
Xie, Yuan
2015-01-01
The emerging three-dimensional (3D) chip architectures, with their intrinsic capability of reducing the wire length, promise attractive solutions to reduce the delay of interconnects in future microprocessors. 3D memory stacking enables much higher memory bandwidth for future chip-multiprocessor design, mitigating the ""memory wall"" problem. In addition, heterogenous integration enabled by 3D technology can also result in innovative designs for future microprocessors. This book first provides a brief introduction to this emerging technology, and then presents a variety of approaches to design
Parameterization for fitting triangular mesh
Institute of Scientific and Technical Information of China (English)
LIN Hongwei; WANG Guojin; LIU Ligang; BAO Hujun
2006-01-01
In recent years, with the development of 3D data acquisition equipments, the study on reverse engineering has become more and more important. However, the existing methods for parameterization can hardly ensure that the parametric domain is rectangular, and the parametric curve grid is regular. In order to overcome these limitations, we present a novel method for parameterization of triangular meshes in this paper. The basic idea is twofold: first, because the isotherms in the steady temperature do not intersect with each other, and are distributed uniformly, no singularity (fold-over) exists in the parameterization; second, a 3D harmonic equation is solved by the finite element method to obtain the steady temperature field on a 2D triangular mesh surface with four boundaries. Therefore, our proposed method avoids the embarrassment that it is impossible to solve the 2D quasi-harmonic equation on the 2D triangular mesh without the parametric values at mesh vertices. Furthermore, the isotherms on the temperature field are taken as a set of iso-parametric curves on the triangular mesh surface. The other set of iso-parametric curves can be obtained by connecting the points with the same chord-length on the isotherms sequentially. The obtained parametric curve grid is regular, and distributed uniformly, and can map the triangular mesh surface to the unit square domain with boundaries of mesh surface to boundaries of parametric domain, which ensures that the triangular mesh surface or point cloud can be fitted with the NURBS surface.
Guaranteed-Quality Triangular Meshes
1989-04-01
Defense Ad, : ed Research P: jects Pgency or the U.S- Gower ment° iI Guaranteed-Quality Triangular Meshes DTIC ELECTE L. Paul Chew* JUL 1419891 TR 89-983 S... Wittchen , M. S. Shephard, K. R. Grice, and M. A. Yerry, Robust, geometrically based, automatic two-dimensional mesh generation, International Journal for
An Improved Moving Mesh Algorithm
Institute of Scientific and Technical Information of China (English)
无
2001-01-01
we consider an iterative algorithm of mesh optimization for finite element solution, and give an improved moving mesh strategy that reduces rapidly the complexity and cost of solving variational problems.A numerical result is presented for a 2-dimensional problem by the improved algorithm.
Adaptive and Unstructured Mesh Cleaving
Bronson, Jonathan R.; Sastry, Shankar P.; Levine, Joshua A.; Whitaker, Ross T.
2015-01-01
We propose a new strategy for boundary conforming meshing that decouples the problem of building tetrahedra of proper size and shape from the problem of conforming to complex, non-manifold boundaries. This approach is motivated by the observation that while several methods exist for adaptive tetrahedral meshing, they typically have difficulty at geometric boundaries. The proposed strategy avoids this conflict by extracting the boundary conforming constraint into a secondary step. We first build a background mesh having a desired set of tetrahedral properties, and then use a generalized stenciling method to divide, or “cleave”, these elements to get a set of conforming tetrahedra, while limiting the impacts cleaving has on element quality. In developing this new framework, we make several technical contributions including a new method for building graded tetrahedral meshes as well as a generalization of the isosurface stuffing and lattice cleaving algorithms to unstructured background meshes. PMID:26137171
Energy Technology Data Exchange (ETDEWEB)
Greene, Patrick T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Schofield, Samuel P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Nourgaliev, Robert [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
2016-06-21
A new mesh smoothing method designed to cluster mesh cells near a dynamically evolving interface is presented. The method is based on weighted condition number mesh relaxation with the weight function being computed from a level set representation of the interface. The weight function is expressed as a Taylor series based discontinuous Galerkin projection, which makes the computation of the derivatives of the weight function needed during the condition number optimization process a trivial matter. For cases when a level set is not available, a fast method for generating a low-order level set from discrete cell-centered elds, such as a volume fraction or index function, is provided. Results show that the low-order level set works equally well for the weight function as the actual level set. Meshes generated for a number of interface geometries are presented, including cases with multiple level sets. Dynamic cases for moving interfaces are presented to demonstrate the method's potential usefulness to arbitrary Lagrangian Eulerian (ALE) methods.
Asymmetric Flexible Supercapacitor Stack
Directory of Open Access Journals (Sweden)
Leela Mohana Reddy A
2008-01-01
Full Text Available AbstractElectrical double layer supercapacitor is very significant in the field of electrical energy storage which can be the solution for the current revolution in the electronic devices like mobile phones, camera flashes which needs flexible and miniaturized energy storage device with all non-aqueous components. The multiwalled carbon nanotubes (MWNTs have been synthesized by catalytic chemical vapor deposition technique over hydrogen decrepitated Mischmetal (Mm based AB3alloy hydride. The polymer dispersed MWNTs have been obtained by insitu polymerization and the metal oxide/MWNTs were synthesized by sol-gel method. Morphological characterizations of polymer dispersed MWNTs have been carried out using scanning electron microscopy (SEM, transmission electron microscopy (TEM and HRTEM. An assymetric double supercapacitor stack has been fabricated using polymer/MWNTs and metal oxide/MWNTs coated over flexible carbon fabric as electrodes and nafion®membrane as a solid electrolyte. Electrochemical performance of the supercapacitor stack has been investigated using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy.
Stacked Extreme Learning Machines.
Zhou, Hongming; Huang, Guang-Bin; Lin, Zhiping; Wang, Han; Soh, Yeng Chai
2015-09-01
Extreme learning machine (ELM) has recently attracted many researchers' interest due to its very fast learning speed, good generalization ability, and ease of implementation. It provides a unified solution that can be used directly to solve regression, binary, and multiclass classification problems. In this paper, we propose a stacked ELMs (S-ELMs) that is specially designed for solving large and complex data problems. The S-ELMs divides a single large ELM network into multiple stacked small ELMs which are serially connected. The S-ELMs can approximate a very large ELM network with small memory requirement. To further improve the testing accuracy on big data problems, the ELM autoencoder can be implemented during each iteration of the S-ELMs algorithm. The simulation results show that the S-ELMs even with random hidden nodes can achieve similar testing accuracy to support vector machine (SVM) while having low memory requirements. With the help of ELM autoencoder, the S-ELMs can achieve much better testing accuracy than SVM and slightly better accuracy than deep belief network (DBN) with much faster training speed.
Malba, V.
1998-11-10
A manufacturable process for fabricating electrical interconnects which extend from a top surface of an integrated circuit chip to a sidewall of the chip using laser pantography to pattern three dimensional interconnects. The electrical interconnects may be of an L-connect or L-shaped type. The process implements three dimensional (3D) stacking by moving the conventional bond or interface pads on a chip to the sidewall of the chip. Implementation of the process includes: (1) holding individual chips for batch processing, (2) depositing a dielectric passivation layer on the top and sidewalls of the chips, (3) opening vias in the dielectric, (4) forming the interconnects by laser pantography, and (5) removing the chips from the holding means. The process enables low cost manufacturing of chips with bond pads on the sidewalls, which enables stacking for increased performance, reduced space, and higher functional per unit volume. 3 figs.
Malba, Vincent
1998-01-01
A manufacturable process for fabricating electrical interconnects which extend from a top surface of an integrated circuit chip to a sidewall of the chip using laser pantography to pattern three dimensional interconnects. The electrical interconnects may be of an L-connect or L-shaped type. The process implements three dimensional (3D) stacking by moving the conventional bond or interface pads on a chip to the sidewall of the chip. Implementation of the process includes: 1) holding individual chips for batch processing, 2) depositing a dielectric passivation layer on the top and sidewalls of the chips, 3) opening vias in the dielectric, 4) forming the interconnects by laser pantography, and 5) removing the chips from the holding means. The process enables low cost manufacturing of chips with bond pads on the sidewalls, which enables stacking for increased performance, reduced space, and higher functional per unit volume.
Gradient Domain Mesh Deformation - A Survey
Institute of Scientific and Technical Information of China (English)
Wei-Wei Xu; Kun Zhou
2009-01-01
This survey reviews the recent development of gradient domain mesh deformation method. Different to other deformation methods, the gradient domain deformation method is a surface-based, variational optimization method. It directly encodes the geometric details in differential coordinates, which are also called Laplacian coordinates in literature. By preserving the Laplacian coordinates, the mesh details can be well preserved during deformation. Due to the locality of the Laplacian coordinates, the variational optimization problem can be casted into a sparse linear system. Fast sparse linear solver can be adopted to generate deformation result interactively, or even in real-time. The nonlinear nature of gradient domain mesh deformation leads to the development of two categories of deformation methods: linearization methods and nonlinear optimization methods. Basically, the linearization methods only need to solve the linear least-squares system once. They are fast, easy to understand and control, while the deformation result might be suboptimal. Nonlinear optimization methods can reach optimal solution of deformation energy function by iterative updating. Since the computation of nonlinear methods is expensive, reduced deformable models should be adopted to achieve interactive performance. The nonlinear optimization methods avoid the user burden to input transformation at deformation handles, and they can be extended to incorporate various nonlinear constraints, like volume constraint, skeleton constraint, and so on. We review representative methods and related approaches of each category comparatively and hope to help the user understand the motivation behind the algorithms. Finally, we discuss the relation between physical simulation and gradient domain mesh deformation to reveal why it can achieve physically plausible deformation result.
Streaming Compression of Hexahedral Meshes
Energy Technology Data Exchange (ETDEWEB)
Isenburg, M; Courbet, C
2010-02-03
We describe a method for streaming compression of hexahedral meshes. Given an interleaved stream of vertices and hexahedral our coder incrementally compresses the mesh in the presented order. Our coder is extremely memory efficient when the input stream documents when vertices are referenced for the last time (i.e. when it contains topological finalization tags). Our coder then continuously releases and reuses data structures that no longer contribute to compressing the remainder of the stream. This means in practice that our coder has only a small fraction of the whole mesh in memory at any time. We can therefore compress very large meshes - even meshes that do not file in memory. Compared to traditional, non-streaming approaches that load the entire mesh and globally reorder it during compression, our algorithm trades a less compact compressed representation for significant gains in speed, memory, and I/O efficiency. For example, on the 456k hexahedra 'blade' mesh, our coder is twice as fast and uses 88 times less memory (only 3.1 MB) with the compressed file increasing about 3% in size. We also present the first scheme for predictive compression of properties associated with hexahedral cells.
Modelling axisymmetric cod-ends made of different mesh types
DEFF Research Database (Denmark)
Priour, D.; Herrmann, Bent; O'Neill, F.G.
2009-01-01
Cod-ends are the rearmost part of trawl fishing gears. They collect the catch, and for many important species it is where fish selection takes place. Generally speaking they are axisymmetric, and their shape is influenced by the catch volume, the mesh shape, and the material characteristics. The ...
Application of the VOF method based on unstructured quadrilateral mesh
Institute of Scientific and Technical Information of China (English)
JI Chun-ning; SHI Ying
2008-01-01
To simulate two-dimensional free-surface flows with complex boundaries directly and accurately, a novel VOF (Volume-of-fluid) method based on unstructured quadrilateral mesh is presented. Without introducing any complicated boundary treatment or artificial diffusion, this method treated curved boundaries directly by utilizing the inherent merit of unstructured mesh in fitting curves. The PLIC (Piecewise Linear Interface Calculation) method was adopted to obtain a second-order accurate linearized reconstruction approximation and the MLER (Modified Lagrangian-Eulerian Re-map) method was introduced to advect fluid volumes on unstructured mesh. Moreover, an analytical relation for the interface's line constant vs. the volume clipped by the interface was developed so as to improve the method's efficiency. To validate this method, a comprehensive series of large straining advection tests were performed. Numerical results provide convincing evidences for the method's high volume conservative accuracy and second-order shape error convergence rate. Also, a dramatic improvement on computational accuracy over its unstructured triangular mesh counterpart is checked.
Judge, Gary
2013-01-01
Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A fast-paced, example-based approach guide for learning BlueStacks.This book is for anyone with a Mac or PC who wants to run Android apps on their computer. Whether you want to play games that are freely available for Android but not your computer, or you want to try apps before you install them on a physical device or use it as a development tool, this book will show you how. No previous experience is needed as this is written in plain English
Mesh Adaptation and Shape Optimization on Unstructured Meshes Project
National Aeronautics and Space Administration — In this SBIR CRM proposes to implement the entropy adjoint method for solution adaptive mesh refinement into the Loci/CHEM unstructured flow solver. The scheme will...
An Efficient Approach for Solving Mesh Optimization Problems Using Newton’s Method
Directory of Open Access Journals (Sweden)
Jibum Kim
2014-01-01
Full Text Available We present an efficient approach for solving various mesh optimization problems. Our approach is based on Newton’s method, which uses both first-order (gradient and second-order (Hessian derivatives of the nonlinear objective function. The volume and surface mesh optimization algorithms are developed such that mesh validity and surface constraints are satisfied. We also propose several Hessian modification methods when the Hessian matrix is not positive definite. We demonstrate our approach by comparing our method with nonlinear conjugate gradient and steepest descent methods in terms of both efficiency and mesh quality.
Nanowire mesh solar fuels generator
Energy Technology Data Exchange (ETDEWEB)
Yang, Peidong; Chan, Candace; Sun, Jianwei; Liu, Bin
2016-05-24
This disclosure provides systems, methods, and apparatus related to a nanowire mesh solar fuels generator. In one aspect, a nanowire mesh solar fuels generator includes (1) a photoanode configured to perform water oxidation and (2) a photocathode configured to perform water reduction. The photocathode is in electrical contact with the photoanode. The photoanode may include a high surface area network of photoanode nanowires. The photocathode may include a high surface area network of photocathode nanowires. In some embodiments, the nanowire mesh solar fuels generator may include an ion conductive polymer infiltrating the photoanode and the photocathode in the region where the photocathode is in electrical contact with the photoanode.
Wire-Mesh-Based Sorber for Removing Contaminants from Air
Perry, Jay; Roychoudhury, Subir; Walsh, Dennis
2006-01-01
A paper discusses an experimental regenerable sorber for removing CO2 and trace components principally, volatile organic compounds, halocarbons, and NH3 from spacecraft cabin air. This regenerable sorber is a prototype of what is intended to be a lightweight alternative to activated-carbon and zeolite-pellet sorbent beds now in use. The regenerable sorber consists mainly of an assembly of commercially available meshes that have been coated with a specially-formulated washcoat containing zeolites. The zeolites act as the sorbents while the meshes support the zeolite-containing washcoat in a configuration that affords highly effective surface area for exposing the sorbents to flowing air. The meshes also define flow paths characterized by short channel lengths to prevent excessive buildup of flow boundary layers. Flow boundary layer resistance is undesired because it can impede mass and heat transfer. The total weight and volume comparison versus the atmosphere revitalization equipment used onboard the International Space Station for CO2 and trace-component removal will depend upon the design details of the final embodiment. However, the integrated mesh-based CO2 and trace-contaminant removal system is expected to provide overall weight and volume savings by eliminating most of the trace-contaminant control equipment presently used in parallel processing schemes traditionally used for spacecraft. The mesh-based sorbent media enables integrating the two processes within a compact package. For the purpose of regeneration, the sorber can be heated by passing electric currents through the metallic meshes combined with exposure to space vacuum. The minimal thermal mass of the meshes offers the potential for reduced regeneration-power requirements and cycle time required for regeneration compared to regenerable sorption processes now in use.
An unstructured-mesh atmospheric model for nonhydrostatic dynamics: Towards optimal mesh resolution
Szmelter, Joanna; Zhang, Zhao; Smolarkiewicz, Piotr K.
2015-08-01
The paper advances the limited-area anelastic model (Smolarkiewicz et al. (2013) [45]) for investigation of nonhydrostatic dynamics in mesoscale atmospheric flows. New developments include the extension to a tetrahedral-based median-dual option for unstructured meshes and a static mesh adaptivity technique using an error indicator based on inherent properties of the Multidimensional Positive Definite Advection Transport Algorithm (MPDATA). The model employs semi-implicit nonoscillatory forward-in-time integrators for soundproof PDEs, built on MPDATA and a robust non-symmetric Krylov-subspace elliptic solver. Finite-volume spatial discretisation adopts an edge-based data structure. Simulations of stratified orographic flows and the associated gravity-wave phenomena in media with uniform and variable dispersive properties verify the advancement and demonstrate the potential of heterogeneous anisotropic discretisation with large variation in spatial resolution for study of complex stratified flows that can be computationally unattainable with regular grids.
Cerutti, Guillaume; Ali, Olivier; Godin, Christophe
2017-01-01
Context: The shoot apical meristem (SAM), origin of all aerial organs of the plant, is a restricted niche of stem cells whose growth is regulated by a complex network of genetic, hormonal and mechanical interactions. Studying the development of this area at cell level using 3D microscopy time-lapse imaging is a newly emerging key to understand the processes controlling plant morphogenesis. Computational models have been proposed to simulate those mechanisms, however their validation on real-life data is an essential step that requires an adequate representation of the growing tissue to be carried out. Achievements: The tool we introduce is a two-stage computational pipeline that generates a complete 3D triangular mesh of the tissue volume based on a segmented tissue image stack. DRACO (Dual Reconstruction by Adjacency Complex Optimization) is designed to retrieve the underlying 3D topological structure of the tissue and compute its dual geometry, while STEM (SAM Tissue Enhanced Mesh) returns a faithful triangular mesh optimized along several quality criteria (intrinsic quality, tissue reconstruction, visual adequacy). Quantitative evaluation tools measuring the performance of the method along those different dimensions are also provided. The resulting meshes can be used as input and validation for biomechanical simulations. Availability: DRACO-STEM is supplied as a package of the open-source multi-platform plant modeling library OpenAlea (http://openalea.github.io/) implemented in Python, and is freely distributed on GitHub (https://github.com/VirtualPlants/draco-stem) along with guidelines for installation and use.
Assessing Elementary Algebra with STACK
Sangwin, Christopher J.
2007-01-01
This paper concerns computer aided assessment (CAA) of mathematics in which a computer algebra system (CAS) is used to help assess students' responses to elementary algebra questions. Using a methodology of documentary analysis, we examine what is taught in elementary algebra. The STACK CAA system, http://www.stack.bham.ac.uk/, which uses the CAS…
Malkin, Tamsin L; Murray, Benjamin J; Salzmann, Christoph G; Molinero, Valeria; Pickering, Steven J; Whale, Thomas F
2015-01-07
Traditionally, ice I was considered to exist in two well-defined crystalline forms at ambient pressure: stable hexagonal ice (ice Ih) and metastable cubic ice (ice Ic). However, it is becoming increasingly evident that what has been called cubic ice in the past does not have a structure consistent with the cubic crystal system. Instead, it is a stacking-disordered material containing cubic sequences interlaced with hexagonal sequences, which is termed stacking-disordered ice (ice Isd). In this article, we summarise previous work on ice with stacking disorder including ice that was called cubic ice in the past. We also present new experimental data which shows that ice which crystallises after heterogeneous nucleation in water droplets containing solid inclusions also contains stacking disorder even at freezing temperatures of around -15 °C. This supports the results from molecular simulations, that the structure of ice that crystallises initially from supercooled water is always stacking-disordered and that this metastable ice can transform to the stable hexagonal phase subject to the kinetics of recrystallization. We also show that stacking disorder in ice which forms from water droplets is quantitatively distinct from ice made via other routes. The emerging picture of ice I is that of a very complex material which frequently contains stacking disorder and this stacking disorder can vary in complexity depending on the route of formation and thermal history.
Mersiline mesh in premaxillary augmentation.
Foda, Hossam M T
2005-01-01
Premaxillary retrusion may distort the aesthetic appearance of the columella, lip, and nasal tip. This defect is characteristically seen in, but not limited to, patients with cleft lip nasal deformity. This study investigated 60 patients presenting with premaxillary deficiencies in which Mersiline mesh was used to augment the premaxilla. All the cases had surgery using the external rhinoplasty technique. Two methods of augmentation with Mersiline mesh were used: the Mersiline roll technique, for the cases with central symmetric deficiencies, and the Mersiline packing technique, for the cases with asymmetric deficiencies. Premaxillary augmentation with Mersiline mesh proved to be simple technically, easy to perform, and not associated with any complications. Periodic follow-up evaluation for a mean period of 32 months (range, 12-98 months) showed that an adequate degree of premaxillary augmentation was maintained with no clinically detectable resorption of the mesh implant.
E pur si muove: Galiliean-invariant cosmological hydrodynamical simulations on a moving mesh
Springel, Volker
2009-01-01
Hydrodynamic cosmological simulations at present usually employ either the Lagrangian SPH technique, or Eulerian hydrodynamics on a Cartesian mesh with adaptive mesh refinement. Both of these methods have disadvantages that negatively impact their accuracy in certain situations. We here propose a novel scheme which largely eliminates these weaknesses. It is based on a moving unstructured mesh defined by the Voronoi tessellation of a set of discrete points. The mesh is used to solve the hyperbolic conservation laws of ideal hydrodynamics with a finite volume approach, based on a second-order unsplit Godunov scheme with an exact Riemann solver. The mesh-generating points can in principle be moved arbitrarily. If they are chosen to be stationary, the scheme is equivalent to an ordinary Eulerian method with second order accuracy. If they instead move with the velocity of the local flow, one obtains a Lagrangian formulation of hydrodynamics that does not suffer from the mesh distortion limitations inherent in othe...
Energy Technology Data Exchange (ETDEWEB)
Spear, A. D. [Department of Mechanical Engineering, University of Utah, Salt Lake City UT USA; Hochhalter, J. D. [NASA Langley Research Center, Hampton VA USA; Cerrone, A. R. [GE Global Research Center, Niskayuna NY USA; Li, S. F. [Lawrence Livermore National Laboratory, Livermore CA USA; Lind, J. F. [Lawrence Livermore National Laboratory, Livermore CA USA; Suter, R. M. [Department of Physics, Carnegie Mellon University, Pittsburgh PA USA; Ingraffea, A. R. [School of Civil & Environmental Engineering, Cornell University, Ithaca NY USA
2016-04-27
In an effort to reproduce computationally the observed evolution of microstructurally small fatigue cracks (MSFCs), a method is presented for generating conformal, finite-element (FE), volume meshes from 3D measurements of MSFC propagation. The resulting volume meshes contain traction-free surfaces that conform to incrementally measured 3D crack shapes. Grain morphologies measured using near-field high-energy X-ray diffraction microscopy are also represented within the FE volume meshes. Proof-of-concept simulations are performed to demonstrate the utility of the mesh-generation method. The proof-of-concept simulations employ a crystal-plasticity constitutive model and are performed using the conformal FE meshes corresponding to successive crack-growth increments. Although the simulations for each crack increment are currently independent of one another, they need not be, and transfer of material-state information among successive crack-increment meshes is discussed. The mesh-generation method was developed using post-mortem measurements, yet it is general enough that it can be applied to in-situ measurements of 3D MSFC propagation.
GENERATION OF IRREGULAR HEXAGONAL MESHES
Directory of Open Access Journals (Sweden)
Vlasov Aleksandr Nikolaevich
2012-07-01
Decomposition is performed in a constructive way and, as option, it involves meshless representation. Further, this mapping method is used to generate the calculation mesh. In this paper, the authors analyze different cases of mapping onto simply connected and bi-connected canonical domains. They represent forward and backward mapping techniques. Their potential application for generation of nonuniform meshes within the framework of the asymptotic homogenization theory is also performed to assess and project effective characteristics of heterogeneous materials (composites.
Image-driven mesh optimization
Energy Technology Data Exchange (ETDEWEB)
Lindstrom, P; Turk, G
2001-01-05
We describe a method of improving the appearance of a low vertex count mesh in a manner that is guided by rendered images of the original, detailed mesh. This approach is motivated by the fact that greedy simplification methods often yield meshes that are poorer than what can be represented with a given number of vertices. Our approach relies on edge swaps and vertex teleports to alter the mesh connectivity, and uses the downhill simplex method to simultaneously improve vertex positions and surface attributes. Note that this is not a simplification method--the vertex count remains the same throughout the optimization. At all stages of the optimization the changes are guided by a metric that measures the differences between rendered versions of the original model and the low vertex count mesh. This method creates meshes that are geometrically faithful to the original model. Moreover, the method takes into account more subtle aspects of a model such as surface shading or whether cracks are visible between two interpenetrating parts of the model.
Robust Generation of Signed Distance Fields from Triangle Meshes
DEFF Research Database (Denmark)
Bærentzen, Jakob Andreas
2005-01-01
is then used to convert the binary volume into a distance field. The method is robust and handles holes, spurious triangles and ambiguities. Moreover, the method lends itself to Boolean operations between solids. Since a point cloud as well as a signed distance is generated, it is possible to extract an iso......-surface of the distance field and fit it to the point set. Using this method, one may recover sharp edge information. Examples are given where the method for generating distance fields coupled with mesh fitting is used to perform Boolean and morphological operations on triangle meshes....
Form-finding with polyhedral meshes made simple
Tang, Chengcheng
2015-08-09
We solve the form-finding problem for polyhedral meshes in a way which combines form, function and fabrication; taking care of user-specified constraints like boundary interpolation, planarity of faces, statics, panel size and shape, enclosed volume, and cost. Our main application is the interactive modeling of meshes for architectural and industrial design. Our approach can be described as guided exploration of the constraint space whose algebraic structure is simplified by introducing auxiliary variables and ensuring that constraints are at most quadratic.
Method and system for mesh network embedded devices
Wang, Ray (Inventor)
2009-01-01
A method and system for managing mesh network devices. A mesh network device with integrated features creates an N-way mesh network with a full mesh network topology or a partial mesh network topology.
Shepherd, Jason; Mitchell, Scott A.; Jankovich, Steven R.; Benzley, Steven E.
2007-05-15
The present invention provides a meshing method, called grafting, that lifts the prior art constraint on abutting surfaces, including surfaces that are linking, source/target, or other types of surfaces of the trunk volume. The grafting method locally modifies the structured mesh of the linking surfaces allowing the mesh to conform to additional surface features. Thus, the grafting method can provide a transition between multiple sweep directions extending sweeping algorithms to 23/4-D solids. The method is also suitable for use with non-sweepable volumes; the method provides a transition between meshes generated by methods other than sweeping as well.
User Manual for the PROTEUS Mesh Tools
Energy Technology Data Exchange (ETDEWEB)
Smith, Micheal A. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, Emily R. [Argonne National Lab. (ANL), Argonne, IL (United States)
2015-06-01
This report describes the various mesh tools that are provided with the PROTEUS code giving both descriptions of the input and output. In many cases the examples are provided with a regression test of the mesh tools. The most important mesh tools for any user to consider using are the MT_MeshToMesh.x and the MT_RadialLattice.x codes. The former allows the conversion between most mesh types handled by PROTEUS while the second allows the merging of multiple (assembly) meshes into a radial structured grid. Note that the mesh generation process is recursive in nature and that each input specific for a given mesh tool (such as .axial or .merge) can be used as “mesh” input for any of the mesh tools discussed in this manual.
Mesh refinement strategy for optimal control problems
Paiva, Luis Tiago; Fontes, Fernando,
2013-01-01
International audience; Direct methods are becoming the most used technique to solve nonlinear optimal control problems. Regular time meshes having equidistant spacing are frequently used. However, in some cases these meshes cannot cope accurately with nonlinear behavior. One way to improve the solution is to select a new mesh with a greater number of nodes. Another way, involves adaptive mesh refinement. In this case, the mesh nodes have non equidistant spacing which allow a non uniform node...
GOTPM: A Parallel Hybrid Particle-Mesh Treecode
Dubinski, J; Park, C; Humble, R J; Dubinski, John; Kim, Juhan; Park, Changbom; Humble, Robin
2004-01-01
We describe a parallel, cosmological N-body code based on a hybrid scheme using the particle-mesh (PM) and Barnes-Hut (BH) oct-tree algorithm. We call the algorithm GOTPM for Grid-of-Oct-Trees-Particle-Mesh. The code is parallelized using the Message Passing Interface (MPI) library and is optimized to run on Beowulf clusters as well as symmetric multi-processors. The gravitational potential is determined on a mesh using a standard PM method with particle forces determined through interpolation. The softened PM force is corrected for short range interactions using a grid of localized BH trees throughout the entire simulation volume in a completely analogous way to P$^3$M methods. This method makes no assumptions about the local density for short range force corrections and so is consistent with the results of the P$^3$M method in the limit that the treecode opening angle parameter, $\\theta \\to 0$. (abridged)
An edge-based unstructured mesh discretisation in geospherical framework
Szmelter, Joanna; Smolarkiewicz, Piotr K.
2010-07-01
An arbitrary finite-volume approach is developed for discretising partial differential equations governing fluid flows on the sphere. Unconventionally for unstructured-mesh global models, the governing equations are cast in the anholonomic geospherical framework established in computational meteorology. The resulting discretisation retains proven properties of the geospherical formulation, while it offers the flexibility of unstructured meshes in enabling irregular spatial resolution. The latter allows for a global enhancement of the spatial resolution away from the polar regions as well as for a local mesh refinement. A class of non-oscillatory forward-in-time edge-based solvers is developed and applied to numerical examples of three-dimensional hydrostatic flows, including shallow-water benchmarks, on a rotating sphere.
Soundproof simulations of stratospheric gravity waves on unstructured meshes
Smolarkiewicz, P.; Szmelter, J.
2012-04-01
An edge-based unstructured-mesh semi-implicit model is presented that integrates nonhydrostatic soundproof equations, inclusive of anelastic and pseudo-incompressible systems of partial differential equations. The model numerics employ nonoscillatory forward-in-time MPDATA methods [Smolarkiewicz, 2006, Int. J. Numer. Meth. Fl., 50, 1123-1144] using finite-volume spatial discretization and unstructured meshes with arbitrarily shaped cells. Implicit treatment of gravity waves benefits both accuracy and stability of the model. The unstructured-mesh solutions are compared to equivalent structured-grid results for intricate, multiscale internal-wave phenomenon of a non-Boussinesq amplification and breaking of deep stratospheric gravity waves. The departures of the anelastic and pseudo-incompressible results are quantified in reference to a recent asymptotic theory [Achatz et al., 2010, J. Fluid Mech., 663, 120-147].
Connectivity editing for quadrilateral meshes
Peng, Chihan
2011-12-12
We propose new connectivity editing operations for quadrilateral meshes with the unique ability to explicitly control the location, orientation, type, and number of the irregular vertices (valence not equal to four) in the mesh while preserving sharp edges. We provide theoretical analysis on what editing operations are possible and impossible and introduce three fundamental operations to move and re-orient a pair of irregular vertices. We argue that our editing operations are fundamental, because they only change the quad mesh in the smallest possible region and involve the fewest irregular vertices (i.e., two). The irregular vertex movement operations are supplemented by operations for the splitting, merging, canceling, and aligning of irregular vertices. We explain how the proposed highlevel operations are realized through graph-level editing operations such as quad collapses, edge flips, and edge splits. The utility of these mesh editing operations are demonstrated by improving the connectivity of quad meshes generated from state-of-art quadrangulation techniques. © 2011 ACM.
Connectivity editing for quadrilateral meshes
Peng, Chihan
2011-12-01
We propose new connectivity editing operations for quadrilateral meshes with the unique ability to explicitly control the location, orientation, type, and number of the irregular vertices (valence not equal to four) in the mesh while preserving sharp edges. We provide theoretical analysis on what editing operations are possible and impossible and introduce three fundamental operations to move and re-orient a pair of irregular vertices. We argue that our editing operations are fundamental, because they only change the quad mesh in the smallest possible region and involve the fewest irregular vertices (i.e., two). The irregular vertex movement operations are supplemented by operations for the splitting, merging, canceling, and aligning of irregular vertices. We explain how the proposed high-level operations are realized through graph-level editing operations such as quad collapses, edge flips, and edge splits. The utility of these mesh editing operations are demonstrated by improving the connectivity of quad meshes generated from state-of-art quadrangulation techniques.
Numerical simulation of immiscible viscous fingering using adaptive unstructured meshes
Adam, A.; Salinas, P.; Percival, J. R.; Pavlidis, D.; Pain, C.; Muggeridge, A. H.; Jackson, M.
2015-12-01
Displacement of one fluid by another in porous media occurs in various settings including hydrocarbon recovery, CO2 storage and water purification. When the invading fluid is of lower viscosity than the resident fluid, the displacement front is subject to a Saffman-Taylor instability and is unstable to transverse perturbations. These instabilities can grow, leading to fingering of the invading fluid. Numerical simulation of viscous fingering is challenging. The physics is controlled by a complex interplay of viscous and diffusive forces and it is necessary to ensure physical diffusion dominates numerical diffusion to obtain converged solutions. This typically requires the use of high mesh resolution and high order numerical methods. This is computationally expensive. We demonstrate here the use of a novel control volume - finite element (CVFE) method along with dynamic unstructured mesh adaptivity to simulate viscous fingering with higher accuracy and lower computational cost than conventional methods. Our CVFE method employs a discontinuous representation for both pressure and velocity, allowing the use of smaller control volumes (CVs). This yields higher resolution of the saturation field which is represented CV-wise. Moreover, dynamic mesh adaptivity allows high mesh resolution to be employed where it is required to resolve the fingers and lower resolution elsewhere. We use our results to re-examine the existing criteria that have been proposed to govern the onset of instability.Mesh adaptivity requires the mapping of data from one mesh to another. Conventional methods such as consistent interpolation do not readily generalise to discontinuous fields and are non-conservative. We further contribute a general framework for interpolation of CV fields by Galerkin projection. The method is conservative, higher order and yields improved results, particularly with higher order or discontinuous elements where existing approaches are often excessively diffusive.
Mesh Router Nodes placement in Rural Wireless Mesh Networks
Ebongue, Jean Louis Fendji Kedieng; Thron, Christopher; Nlong, Jean Michel
2015-01-01
The problem of placement of mesh router nodes in Wireless Mesh Networks is known to be a NP hard problem. In this paper, the problem is addressed under a constraint of network model tied to rural regions where we usually observe low density and sparse population. We consider the area to cover as decomposed into a set of elementary areas which can be required or optional in terms of coverage and where a node can be placed or not. We propose an effective algorithm to ensure the coverage. This a...
Characterizing source confusion in HI spectral line stacking experiments
Baker, Andrew J.; Elson, Edward C.; Blyth, Sarah
2017-01-01
Forthcoming studies like the Looking At the Distant Universe with the MeerKAT Array (LADUMA) deep HI survey will rely in part on stacking experiments to detect the mean level of HI emission from populations of galaxies that are too faint to be detected individually. Preparations for such experiments benefit from the use of synthetic data cubes built from mock galaxy catalogs and containing model galaxies with realistic spatial and spectral HI distributions over large cosmological volumes. I will present a new set of such synthetic data cubes and show the results of stacking experiments with them. Because the stacked spectra can be accurately decomposed into contributions from target and non-target galaxies, it is possible to characterize the large fractions of contaminant mass that are included in stacked totals due to source confusion. Consistent with estimates extrapolated from z = 0 observational data, we find that the amount of confused mass in a stacked spectrum grows almost linearly with the size of the observational beam, suggesting potential overestimates of the cosmic neutral gas density by some recent HI stacking experiments.
Efficient Packet Forwarding in Mesh Network
Kanrar, Soumen
2012-01-01
Wireless Mesh Network (WMN) is a multi hop low cost, with easy maintenance robust network providing reliable service coverage. WMNs consist of mesh routers and mesh clients. In this architecture, while static mesh routers form the wireless backbone, mesh clients access the network through mesh routers as well as directly meshing with each other. Different from traditional wireless networks, WMN is dynamically self-organized and self-configured. In other words, the nodes in the mesh network automatically establish and maintain network connectivity. Over the years researchers have worked, to reduce the redundancy in broadcasting packet in the mesh network in the wireless domain for providing reliable service coverage, the source node deserves to broadcast or flood the control packets. The redundant control packet consumes the bandwidth of the wireless medium and significantly reduces the average throughput and consequently reduces the overall system performance. In this paper I study the optimization problem in...
On Linear Spaces of Polyhedral Meshes.
Poranne, Roi; Chen, Renjie; Gotsman, Craig
2015-05-01
Polyhedral meshes (PM)-meshes having planar faces-have enjoyed a rise in popularity in recent years due to their importance in architectural and industrial design. However, they are also notoriously difficult to generate and manipulate. Previous methods start with a smooth surface and then apply elaborate meshing schemes to create polyhedral meshes approximating the surface. In this paper, we describe a reverse approach: given the topology of a mesh, we explore the space of possible planar meshes having that topology. Our approach is based on a complete characterization of the maximal linear spaces of polyhedral meshes contained in the curved manifold of polyhedral meshes with a given topology. We show that these linear spaces can be described as nullspaces of differential operators, much like harmonic functions are nullspaces of the Laplacian operator. An analysis of this operator provides tools for global and local design of a polyhedral mesh, which fully expose the geometric possibilities and limitations of the given topology.
Finding Regions of Interest on Toroidal Meshes
Energy Technology Data Exchange (ETDEWEB)
Wu, Kesheng; Sinha, Rishi R; Jones, Chad; Ethier, Stephane; Klasky, Scott; Ma, Kwan-Liu; Shoshani, Arie; Winslett, Marianne
2011-02-09
Fusion promises to provide clean and safe energy, and a considerable amount of research effort is underway to turn this aspiration intoreality. This work focuses on a building block for analyzing data produced from the simulation of microturbulence in magnetic confinementfusion devices: the task of efficiently extracting regions of interest. Like many other simulations where a large amount of data are produced,the careful study of ``interesting'' parts of the data is critical to gain understanding. In this paper, we present an efficient approach forfinding these regions of interest. Our approach takes full advantage of the underlying mesh structure in magnetic coordinates to produce acompact representation of the mesh points inside the regions and an efficient connected component labeling algorithm for constructingregions from points. This approach scales linearly with the surface area of the regions of interest instead of the volume as shown with bothcomputational complexity analysis and experimental measurements. Furthermore, this new approach is 100s of times faster than a recentlypublished method based on Cartesian coordinates.
Hydrodynamic parameters of mesh fillers relevant to miniature regenerative cryocoolers
Landrum, E. C.; Conrad, T. J.; Ghiaasiaan, S. M.; Kirkconnell, Carl S.
2010-06-01
Directional hydrodynamic parameters of two fine-mesh porous materials that are suitable for miniature regenerative cryocoolers were studied under steady and oscillating flows of helium. These materials included stacked discs of #635 stainless steel (wire diameter of 20.3 μm) and #325 phosphor bronze (wire diameter of 35.6 μm) wire mesh screens, which are among the commercially available fillers for use in small-scale regenerators and heat exchangers, respectively. Experiments were performed in test sections in which pressure variations across these fillers, in the axial and lateral (radial) directions, were measured under steady and oscillatory flows. The directional permeability and Forchheimer's inertial coefficient were then obtained by using a Computational Fluid Dynamics (CFD)-assisted method. The oscillatory flow experiments covered a frequency range of 50-200 Hz. The results confirmed the importance of anisotropy in the mesh screen fillers, and indicated differences between the directional hydrodynamic resistance parameters for steady and oscillating flow regimes.
Deformable mesh registration for the validation of automatic target localization algorithms
Robertson, Scott; Weiss, Elisabeth; Hugo, Geoffrey D.
2013-01-01
Purpose: To evaluate deformable mesh registration (DMR) as a tool for validating automatic target registration algorithms used during image-guided radiation therapy. Methods: DMR was implemented in a hierarchical model, with rigid, affine, and B-spline transforms optimized in succession to register a pair of surface meshes. The gross tumor volumes (primary tumor and involved lymph nodes) were contoured by a physician on weekly CT scans in a cohort of lung cancer patients and converted to surface meshes. The meshes from weekly CT images were registered to the mesh from the planning CT, and the resulting registered meshes were compared with the delineated surfaces. Known deformations were also applied to the meshes, followed by mesh registration to recover the known deformation. Mesh registration accuracy was assessed at the mesh surface by computing the symmetric surface distance (SSD) between vertices of each registered mesh pair. Mesh registration quality in regions within 5 mm of the mesh surface was evaluated with respect to a high quality deformable image registration. Results: For 18 patients presenting with a total of 19 primary lung tumors and 24 lymph node targets, the SSD averaged 1.3 ± 0.5 and 0.8 ± 0.2 mm, respectively. Vertex registration errors (VRE) relative to the applied known deformation were 0.8 ± 0.7 and 0.2 ± 0.3 mm for the primary tumor and lymph nodes, respectively. Inside the mesh surface, corresponding average VRE ranged from 0.6 to 0.9 and 0.2 to 0.9 mm, respectively. Outside the mesh surface, average VRE ranged from 0.7 to 1.8 and 0.2 to 1.4 mm. The magnitude of errors generally increased with increasing distance away from the mesh. Conclusions: Provided that delineated surfaces are available, deformable mesh registration is an accurate and reliable method for obtaining a reference registration to validate automatic target registration algorithms for image-guided radiation therapy, specifically in regions on or near the target surfaces
Implicit compressible flow solvers on unstructured meshes
Nagaoka, Makoto; Horinouchi, Nariaki
1993-09-01
An implicit solver for compressible flows using Bi-CGSTAB method is proposed. The Euler equations are discretized with the delta-form by the finite volume method on the cell-centered triangular unstructured meshes. The numerical flux is calculated by Roe's upwind scheme. The linearized simultaneous equations with the irregular nonsymmetric sparse matrix are solved by the Bi-CGSTAB method with the preconditioner of incomplete LU factorization. This method is also vectorized by the multi-colored ordering. Although the solver requires more computational memory, it shows faster and more robust convergence than the other conventional methods: three-stage Runge-Kutta method, point Gauss-Seidel method, and Jacobi method for two-dimensional inviscid steady flows.
The Tree-Particle-Mesh N-body Gravity Solver
Bode, P; Xu, G; Bode, Paul; Ostriker, Jeremiah P.; Xu, Guohong
2000-01-01
The Tree-Particle-Mesh (TPM) N-body algorithm couples the tree algorithm for directly computing forces on particles in an hierarchical grouping scheme with the extremely efficient mesh based PM structured approach. The combined TPM algorithm takes advantage of the fact that gravitational forces are linear functions of the density field. Thus one can use domain decomposition to break down the density field into many separate high density regions containing a significant fraction of the mass but residing in a very small fraction of the total volume. In each of these high density regions the gravitational potential is computed via the tree algorithm supplemented by tidal forces from the external density distribution. For the bulk of the volume, forces are computed via the PM algorithm; timesteps in this PM component are large compared to individually determined timesteps in the tree regions. Since each tree region can be treated independently, the algorithm lends itself to very efficient parallelization using me...
Inching toward 'push-button' meshing
National Research Council Canada - National Science Library
James Masters
2015-01-01
While "push-button" meshing remains an elusive goal, advances in 2015 have brought the technology to the point where meshes can be constructed with relative ease when appropriate surfaces are available...
Particle Collection Efficiency for Nylon Mesh Screens
Cena, Lorenzo G.; Ku, Bon-Ki; Peters, Thomas M.
2011-01-01
Mesh screens composed of nylon fibers leave minimal residual ash and produce no significant spectral interference when ashed for spectrometric examination. These characteristics make nylon mesh screens attractive as a collection substrate for nanoparticles. A theoretical single-fiber efficiency expression developed for wire-mesh screens was evaluated for estimating the collection efficiency of submicrometer particles for nylon mesh screens. Pressure drop across the screens, the effect of part...
6th International Meshing Roundtable '97
Energy Technology Data Exchange (ETDEWEB)
White, D.
1997-09-01
The goal of the 6th International Meshing Roundtable is to bring together researchers and developers from industry, academia, and government labs in a stimulating, open environment for the exchange of technical information related to the meshing process. In the pas~ the Roundtable has enjoyed significant participation born each of these groups from a wide variety of countries. The Roundtable will consist of technical presentations from contributed papers and abstracts, two invited speakers, and two invited panels of experts discussing topics related to the development and use of automatic mesh generation tools. In addition, this year we will feature a "Bring Your Best Mesh" competition and poster session to encourage discussion and participation from a wide variety of mesh generation tool users. The schedule and evening social events are designed to provide numerous opportunities for informal dialog. A proceedings will be published by Sandia National Laboratories and distributed at the Roundtable. In addition, papers of exceptionally high quaIity will be submitted to a special issue of the International Journal of Computational Geometry and Applications. Papers and one page abstracts were sought that present original results on the meshing process. Potential topics include but are got limited to: Unstructured triangular and tetrahedral mesh generation Unstructured quadrilateral and hexahedral mesh generation Automated blocking and structured mesh generation Mixed element meshing Surface mesh generation Geometry decomposition and clean-up techniques Geometry modification techniques related to meshing Adaptive mesh refinement and mesh quality control Mesh visualization Special purpose meshing algorithms for particular applications Theoretical or novel ideas with practical potential Technical presentations from industrial researchers.
Adaptive Meshing of Ship Air-Wake Flowfields
2014-10-21
Atkins ] Table 1. Coefficients for BDF schemes Order Φn+1 Φn Φn-1 1st 1 -1 0 2nd 3/2 -2 1/2 The control volume surrounding each node is the median...Enhancements To The FUN3D Flow Solver For Moving-Mesh Applications”, AIAA-2009-1360. Biedron, Robert T., Vatsa, Veer N., and Atkins , Harold L
Efficient and exact mesh deformation using multiscale RBF interpolation
Kedward, L.; Allen, C. B.; Rendall, T. C. S.
2017-09-01
Radial basis function (RBF) interpolation is popular for mesh deformation due to robustness and generality, but the cost scales with the number of surface points sourcing the deformation as O (Ns3). Hence, there have been numerous works investigating efficient methods using reduced datasets. However, although reduced-data methods are efficient, they require a secondary method to treat an error vector field to ensure surface points not included in the primary deformation are moved to the correct location, and the volume mesh moved accordingly. A new method is presented which captures global and local motions at multiple scales using all the surface points, and so no correction stage is required; all surface points are used and a single interpolation built, but the cost and conditioning issues associated with RBF methods are eliminated. Moreover, the sparsity introduced is exploited using a wall distance function, to further reduce the cost. The method is compared to an efficient greedy method, and it is shown mesh quality is always comparable with or better than with the greedy method, and cost is comparable or cheaper at all stages. Surface mesh preprocessing is the dominant cost for reduced-data methods and this cost is reduced significantly here: greedy methods select points to minimise interpolation error, requiring repeated system solution and cost O (Nred4) to select Nred points; the multiscale method has no error, and the problem is transferred to a geometric search, with cost O (Ns log (Ns)), resulting in an eight orders of magnitude cost reduction for three-dimensional meshes. Furthermore, since the method is dependent on geometry, not deformation, it only needs to be applied once, prior to simulation, as the mesh deformation is decoupled from the point selection process.
Glassy carbon based supercapacitor stacks
Energy Technology Data Exchange (ETDEWEB)
Baertsch, M.; Braun, A.; Koetz, R.; Haas, O. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)
1997-06-01
Considerable effort is being made to develop electrochemical double layer capacitors (EDLC) that store relatively large quantities of electrical energy and possess at the same time a high power density. Our previous work has shown that glassy carbon is suitable as a material for capacitor electrodes concerning low resistance and high capacity requirements. We present the development of bipolar electrochemical glassy carbon capacitor stacks of up to 3 V. Bipolar stacks are an efficient way to meet the high voltage and high power density requirements for traction applications. Impedance and cyclic voltammogram measurements are reported here and show the frequency response of a 1, 2, and 3 V stack. (author) 3 figs., 1 ref..
Feature-Weighted Linear Stacking
Sill, Joseph; Mackey, Lester; Lin, David
2009-01-01
Ensemble methods, such as stacking, are designed to boost predictive accuracy by blending the predictions of multiple machine learning models. Recent work has shown that the use of meta-features, additional inputs describing each example in a dataset, can boost the performance of ensemble methods, but the greatest reported gains have come from nonlinear procedures requiring significant tuning and training time. Here, we present a linear technique, Feature-Weighted Linear Stacking (FWLS), that incorporates meta-features for improved accuracy while retaining the well-known virtues of linear regression regarding speed, stability, and interpretability. FWLS combines model predictions linearly using coefficients that are themselves linear functions of meta-features. This technique was a key facet of the solution of the second place team in the recently concluded Netflix Prize competition. Significant increases in accuracy over standard linear stacking is demonstrated on the Netflix Prize collaborative filtering da...
Stacking interactions and DNA intercalation
Energy Technology Data Exchange (ETDEWEB)
Li, Dr. Shen [Fred Hutchinson Cancer Research Center; Cooper, Valentino R [ORNL; Thonhauser, Prof. Timo [Wake Forest University, Winston-Salem, NC; Lundqvist, Prof. Bengt I. [Chalmers University of Technology, Sweden; Langreth, David C. [Rutgers University
2009-01-01
The relationship between stacking interactions and the intercalation of proflavine and ellipticine within DNA is investigated using a nonempirical van der Waals density functional for the correlation energy. Our results, employing a binary stack model, highlight fundamental, qualitative differences between base-pair base-pair interactions and that of the stacked intercalator base pair system. Most notable result is the paucity of torque which so distinctively defines the Twist of DNA. Surprisingly, this model, when combined with a constraint on the twist of the surrounding base-pair steps to match the observed unwinding of the sugar-phosphate backbone, was sufficient for explaining the experimentally observed proflavine intercalator configuration. Our extensive mapping of the potential energy surface of base-pair intercalator interactions can provide valuable information for future nonempirical studies of DNA intercalation dynamics.
2010-10-01
... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Mesh size. 300.110 Section 300.110... Antarctic Marine Living Resources § 300.110 Mesh size. (a) The use of pelagic and bottom trawls having the mesh size in any part of a trawl less than indicated is prohibited for any directed fishing for the...
Markov Random Fields on Triangle Meshes
DEFF Research Database (Denmark)
Andersen, Vedrana; Aanæs, Henrik; Bærentzen, Jakob Andreas
2010-01-01
mesh edges according to a feature detecting prior. Since we should not smooth across a sharp feature, we use edge labels to control the vertex process. In a Bayesian framework, MRF priors are combined with the likelihood function related to the mesh formation method. The output of our algorithm...... is a piecewise smooth mesh with explicit labelling of edges belonging to the sharp features....
Mesh network achieve its fuction on Linux
Pei Ping; PETRENKO Y.N.
2015-01-01
In this paper, we introduce a Mesh network protocol evaluation and development. It has a special protocol. We could easily understand the Linux operation principles which are in use in mesh network. In addition to our comprehension, we describe the graph which shows package routing way. At last according to testing we prove that Mesh protocol AODV satisfy Linux platform performance requirements.
The mesh network protocol evaluation and development
Pei Ping; PETRENKO Y.N.
2015-01-01
In this paper, we introduce a Mesh network protocol evaluation and development. It has a special protocol. We could easily to understand that how different protocols are used in mesh network. In addition to our comprehension, Multi – hop routing protocol could provide robustness and load balancing to communication in wireless mesh networks.
User Manual for the PROTEUS Mesh Tools
Energy Technology Data Exchange (ETDEWEB)
Smith, Micheal A. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, Emily R [Argonne National Lab. (ANL), Argonne, IL (United States)
2016-09-19
PROTEUS is built around a finite element representation of the geometry for visualization. In addition, the PROTEUS-SN solver was built to solve the even-parity transport equation on a finite element mesh provided as input. Similarly, PROTEUS-MOC and PROTEUS-NEMO were built to apply the method of characteristics on unstructured finite element meshes. Given the complexity of real world problems, experience has shown that using commercial mesh generator to create rather simple input geometries is overly complex and slow. As a consequence, significant effort has been put into place to create multiple codes that help assist in the mesh generation and manipulation. There are three input means to create a mesh in PROTEUS: UFMESH, GRID, and NEMESH. At present, the UFMESH is a simple way to generate two-dimensional Cartesian and hexagonal fuel assembly geometries. The UFmesh input allows for simple assembly mesh generation while the GRID input allows the generation of Cartesian, hexagonal, and regular triangular structured grid geometry options. The NEMESH is a way for the user to create their own mesh or convert another mesh file format into a PROTEUS input format. Given that one has an input mesh format acceptable for PROTEUS, we have constructed several tools which allow further mesh and geometry construction (i.e. mesh extrusion and merging). This report describes the various mesh tools that are provided with the PROTEUS code giving both descriptions of the input and output. In many cases the examples are provided with a regression test of the mesh tools. The most important mesh tools for any user to consider using are the MT_MeshToMesh.x and the MT_RadialLattice.x codes. The former allows the conversion between most mesh types handled by PROTEUS while the second allows the merging of multiple (assembly) meshes into a radial structured grid. Note that the mesh generation process is recursive in nature and that each input specific for a given mesh tool (such as .axial
Multiple Segmentation of Image Stacks
DEFF Research Database (Denmark)
Smets, Jonathan; Jaeger, Manfred
2014-01-01
We propose a method for the simultaneous construction of multiple image segmentations by combining a recently proposed “convolution of mixtures of Gaussians” model with a multi-layer hidden Markov random field structure. The resulting method constructs for a single image several, alternative...... segmentations that capture different structural elements of the image. We also apply the method to collections of images with identical pixel dimensions, which we call image stacks. Here it turns out that the method is able to both identify groups of similar images in the stack, and to provide segmentations...
Simulating Small-Scale Object Stacking Using Stack Stability
DEFF Research Database (Denmark)
Kronborg Thomsen, Kasper; Kraus, Martin
2015-01-01
This paper presents an extension system to a closed-source, real-time physics engine for improving structured stacking behavior with small-scale objects such as wooden toy bricks. The proposed system was implemented and evaluated. The tests showed that the system is able to simulate several common...
Future manufacturing techniques for stacked MCM interconnections
Carson, R. F.; Seigal, P. K.; Craft, D. C.; Lovejoy, M. L.
1994-06-01
As multichip modules (MCMs) grow in chip count and complexity, increasingly large numbers of input/output (I/O) channels will be required for connection to other MCMs or printed wiring boards. In applications such as digital signal processing, large increases in processing density (number of operations in a given volume) can be obtained in stacked MCM arrangements. The potential pin counts and required I/O densities in these stacked architectures will push beyond the limits of present interlevel coupling techniques. This problem is particularly acute if easy separation of layers is needed to meet MCM testing and yield requirements. Solutions to this problem include the use of laser-drilled, metal-filled electrical vias in the MCM substrate and also optoelectronic data channels that operate in large arrays. These arrays will emit and detect signals traveling perpendicular to the surface of the MCM. All of these approaches will require packaging and alignment that makes use of advanced MCM manufacturing techniques.
A tetrahedral mesh generation approach for 3D marine controlled-source electromagnetic modeling
Um, Evan Schankee; Kim, Seung-Sep; Fu, Haohuan
2017-03-01
3D finite-element (FE) mesh generation is a major hurdle for marine controlled-source electromagnetic (CSEM) modeling. In this paper, we present a FE discretization operator (FEDO) that automatically converts a 3D finite-difference (FD) model into reliable and efficient tetrahedral FE meshes for CSEM modeling. FEDO sets up wireframes of a background seabed model that precisely honors the seafloor topography. The wireframes are then partitioned into multiple regions. Outer regions of the wireframes are discretized with coarse tetrahedral elements whose maximum size is as large as a skin depth of the regions. We demonstrate that such coarse meshes can produce accurate FE solutions because numerical dispersion errors of tetrahedral meshes do not accumulate but oscillates. In contrast, central regions of the wireframes are discretized with fine tetrahedral elements to describe complex geology in detail. The conductivity distribution is mapped from FD to FE meshes in a volume-averaged sense. To avoid excessive mesh refinement around receivers, we introduce an effective receiver size. Major advantages of FEDO are summarized as follow. First, FEDO automatically generates reliable and economic tetrahedral FE meshes without adaptive meshing or interactive CAD workflows. Second, FEDO produces FE meshes that precisely honor the boundaries of the seafloor topography. Third, FEDO derives multiple sets of FE meshes from a given FD model. Each FE mesh is optimized for a different set of sources and receivers and is fed to a subgroup of processors on a parallel computer. This divide and conquer approach improves the parallel scalability of the FE solution. Both accuracy and effectiveness of FEDO are demonstrated with various CSEM examples.
Pressurized electrolysis stack with thermal expansion capability
Bourgeois, Richard Scott
2015-07-14
The present techniques provide systems and methods for mounting an electrolyzer stack in an outer shell so as to allow for differential thermal expansion of the electrolyzer stack and shell. Generally, an electrolyzer stack may be formed from a material with a high coefficient of thermal expansion, while the shell may be formed from a material having a lower coefficient of thermal expansion. The differences between the coefficients of thermal expansion may lead to damage to the electrolyzer stack as the shell may restrain the thermal expansion of the electrolyzer stack. To allow for the differences in thermal expansion, the electrolyzer stack may be mounted within the shell leaving a space between the electrolyzer stack and shell. The space between the electrolyzer stack and the shell may be filled with a non-conductive fluid to further equalize pressure inside and outside of the electrolyzer stack.
Mamy, Laurent; Letouzey, Vincent; Lavigne, Jean-Philippe; Garric, Xavier; Gondry, Jean; Mares, Pierre; De Tayrac, Renaud
2010-01-01
International audience; INTRODUCTION AND HYPOTHESIS: The aim of this study was to evaluate a link between mesh infection and shrinkage. METHODS: Twenty-eight Wistar rats were implanted with synthetic meshes that were either non-absorbable (polypropylene (PP), n = 14) or absorbable (poly (D: ,L: -lactic acid) (PLA94), n = 14). A validated animal incisionnal abdominal hernia model of mesh infection was used. Fourteen meshes (n = 7 PLA94 and n = 7 PP meshes) were infected intraoperatively with 1...
Confined helium on Lagrange meshes
Baye, Daniel
2015-01-01
The Lagrange-mesh method has the simplicity of a calculation on a mesh and can have the accuracy of a variational method. It is applied to the study of a confined helium atom. Two types of confinement are considered. Soft confinements by potentials are studied in perimetric coordinates. Hard confinement in impenetrable spherical cavities is studied in a system of rescaled perimetric coordinates varying in [0,1] intervals. Energies and mean values of the distances between electrons and between an electron and the helium nucleus are calculated. A high accuracy of 11 to 15 significant figures is obtained with small computing times. Pressures acting on the confined atom are also computed. For sphere radii smaller than 1, their relative accuracies are better than $10^{-10}$. For larger radii up to 10, they progressively decrease to $10^{-3}$, still improving the best literature results.
The moving mesh code Shadowfax
Vandenbroucke, Bert
2016-01-01
We introduce the moving mesh code Shadowfax, which can be used to evolve a mixture of gas, subject to the laws of hydrodynamics and gravity, and any collisionless fluid only subject to gravity, such as cold dark matter or stars. The code is written in C++ and its source code is made available to the scientific community under the GNU Affero General Public License. We outline the algorithm and the design of our implementation, and demonstrate its validity through the results of a set of basic test problems, which are also part of the public version. We also compare Shadowfax with a number of other publicly available codes using different hydrodynamical integration schemes, illustrating the advantages and disadvantages of the moving mesh technique.
The moving mesh code SHADOWFAX
Vandenbroucke, B.; De Rijcke, S.
2016-07-01
We introduce the moving mesh code SHADOWFAX, which can be used to evolve a mixture of gas, subject to the laws of hydrodynamics and gravity, and any collisionless fluid only subject to gravity, such as cold dark matter or stars. The code is written in C++ and its source code is made available to the scientific community under the GNU Affero General Public Licence. We outline the algorithm and the design of our implementation, and demonstrate its validity through the results of a set of basic test problems, which are also part of the public version. We also compare SHADOWFAX with a number of other publicly available codes using different hydrodynamical integration schemes, illustrating the advantages and disadvantages of the moving mesh technique.
On the flexibility of Kokotsakis meshes
Karpenkov, Oleg
2008-01-01
In this paper we study geometric, algebraic, and computational aspects of flexibility and infinitesimal flexibility of Kokotsakis meshes. A Kokotsakis mesh is a mesh that consists of a face in the middle and a certain band of faces attached to the middle face by its perimeter. In particular any 3x3-mesh made of quadrangles is a Kokotsakis mesh. We express the infinitesimal flexibility condition in terms of Ceva and Menelaus theorems. Further we study semi-algebraic properties of the set of fl...
Multilayer Piezoelectric Stack Actuator Characterization
Sherrit, Stewart; Jones, Christopher M.; Aldrich, Jack B.; Blodget, Chad; Bao, Xioaqi; Badescu, Mircea; Bar-Cohen, Yoseph
2008-01-01
Future NASA missions are increasingly seeking to use actuators for precision positioning to accuracies of the order of fractions of a nanometer. For this purpose, multilayer piezoelectric stacks are being considered as actuators for driving these precision mechanisms. In this study, sets of commercial PZT stacks were tested in various AC and DC conditions at both nominal and extreme temperatures and voltages. AC signal testing included impedance, capacitance and dielectric loss factor of each actuator as a function of the small-signal driving sinusoidal frequency, and the ambient temperature. DC signal testing includes leakage current and displacement as a function of the applied DC voltage. The applied DC voltage was increased to over eight times the manufacturers' specifications to investigate the correlation between leakage current and breakdown voltage. Resonance characterization as a function of temperature was done over a temperature range of -180C to +200C which generally exceeded the manufacturers' specifications. In order to study the lifetime performance of these stacks, five actuators from one manufacturer were driven by a 60volt, 2 kHz sine-wave for ten billion cycles. The tests were performed using a Lab-View controlled automated data acquisition system that monitored the waveform of the stack electrical current and voltage. The measurements included the displacement, impedance, capacitance and leakage current and the analysis of the experimental results will be presented.
Transgene Stacking in Cotton Improvement
Institute of Scientific and Technical Information of China (English)
YANG Ye-hua; WANG Xue-kui; YAO Ming-jing; FAN Yu-peng; GAO Da-yu
2008-01-01
@@ To date,more and more transgenic varieties of upland cotton (Gossypium hirsuturn L.) generated with transgenes,which derived from varies of alien species,are playing important role in agricultural production.Stacking of multi-transgenes has a potential for combining all the merits of distinct transgenic lines in a cultivar and possibly makes a significant contribution to cultivar improvement.
Multibeam collimator uses prism stack
Minott, P. O.
1981-01-01
Optical instrument creates many divergent light beams for surveying and machine element alignment applications. Angles and refractive indices of stack of prisms are selected to divert incoming laser beam by small increments, different for each prism. Angles of emerging beams thus differ by small, precisely-controlled amounts. Instrument is nearly immune to vibration, changes in gravitational force, temperature variations, and mechanical distortion.
Transgene Stacking in Cotton Improvement
Institute of Scientific and Technical Information of China (English)
无
2008-01-01
To date,more and more transgenic varieties of upland cotton(Gossypium hirsutum L.) generated with transgenes,which derived from varies of alien species,are playing important role in agricultural production.Stacking of multi-transgenes has a potential for combining all the merits of distinct
Image meshing via hierarchical optimization
Institute of Scientific and Technical Information of China (English)
Hao XIE; Ruo-feng TONG‡
2016-01-01
Vector graphic, as a kind of geometric representation of raster images, has many advantages, e.g., defi nition independence and editing facility. A popular way to convert raster images into vector graphics is image meshing, the aim of which is to fi nd a mesh to represent an image as faithfully as possible. For traditional meshing algorithms, the crux of the problem resides mainly in the high non-linearity and non-smoothness of the objective, which makes it diﬃcult to fi nd a desirable optimal solution. To ameliorate this situation, we present a hierarchical optimization algorithm solving the problem from coarser levels to fi ner ones, providing initialization for each level with its coarser ascent. To further simplify the problem, the original non-convex problem is converted to a linear least squares one, and thus becomes convex, which makes the problem much easier to solve. A dictionary learning framework is used to combine geometry and topology elegantly. Then an alternating scheme is employed to solve both parts. Experiments show that our algorithm runs fast and achieves better results than existing ones for most images.
Image meshing via hierarchical optimization＊
Institute of Scientific and Technical Information of China (English)
Hao XIE; Ruo-feng TONGS
2016-01-01
Vector graphic, as a kind of geometric representation of raster images, has many advantages, e.g., definition independence and editing facility. A popular way to convert raster images into vector graphics is image meshing, the aim of which is to find a mesh to represent an image as faithfully as possible. For traditional meshing algorithms, the crux of the problem resides mainly in the high non-linearity and non-smoothness of the objective, which makes it difficult to find a desirable optimal solution. To ameliorate this situation, we present a hierarchical optimization algorithm solving the problem from coarser levels to finer ones, providing initialization for each level with its coarser ascent. To further simplify the problem, the original non-convex problem is converted to a linear least squares one, and thus becomes convex, which makes the problem much easier to solve. A dictionary learning framework is used to combine geometry and topology elegantly. Then an alternating scheme is employed to solve both parts. Experiments show that our algorithm runs fast and achieves better results than existing ones for most images.
Soto, Dan; Le Helloco, Antoine; Clanet, Cristophe; Quere, David; Varanasi, Kripa
2016-11-01
A drop thrown against a mesh can pass through its holes if impacting with enough inertia. As a result, although part of the droplet may remain on one side of the sieve, the rest will end up grated through the other side. This inexpensive method to break up millimetric droplets into micrometric ones may be of particular interest in a wide variety of applications: enhancing evaporation of droplets launched from the top of an evaporative cooling tower or preventing drift of pesticides sprayed above crops by increasing their initial size and atomizing them at the very last moment with a mesh. In order to understand how much liquid will be grated we propose in this presentation to start first by studying a simpler situation: a drop impacting a plate pierced with a single off centered hole. The study of the role of natural parameters such as the radius drop and speed or the hole position, size and thickness allows us to discuss then the more general situation of a plate pierced with multiple holes: the mesh.
Dynamic mesh for TCAD modeling with ECORCE
Michez, A.; Boch, J.; Touboul, A.; Saigné, F.
2016-08-01
Mesh generation for TCAD modeling is challenging. Because densities of carriers can change by several orders of magnitude in thin areas, a significant change of the solution can be observed for two very similar meshes. The mesh must be defined at best to minimize this change. To address this issue, a criterion based on polynomial interpolation on adjacent nodes is proposed that adjusts accurately the mesh to the gradients of Degrees of Freedom. Furthermore, a dynamic mesh that follows changes of DF in DC and transient mode is a powerful tool for TCAD users. But, in transient modeling, adding nodes to a mesh induces oscillations in the solution that appears as spikes at the current collected at the contacts. This paper proposes two schemes that solve this problem. Examples show that using these techniques, the dynamic mesh generator of the TCAD tool ECORCE handle semiconductors devices in DC and transient mode.
SHARP/PRONGHORN Interoperability: Mesh Generation
Energy Technology Data Exchange (ETDEWEB)
Avery Bingham; Javier Ortensi
2012-09-01
Progress toward collaboration between the SHARP and MOOSE computational frameworks has been demonstrated through sharing of mesh generation and ensuring mesh compatibility of both tools with MeshKit. MeshKit was used to build a three-dimensional, full-core very high temperature reactor (VHTR) reactor geometry with 120-degree symmetry, which was used to solve a neutron diffusion critical eigenvalue problem in PRONGHORN. PRONGHORN is an application of MOOSE that is capable of solving coupled neutron diffusion, heat conduction, and homogenized flow problems. The results were compared to a solution found on a 120-degree, reflected, three-dimensional VHTR mesh geometry generated by PRONGHORN. The ability to exchange compatible mesh geometries between the two codes is instrumental for future collaboration and interoperability. The results were found to be in good agreement between the two meshes, thus demonstrating the compatibility of the SHARP and MOOSE frameworks. This outcome makes future collaboration possible.
Cluster parallel rendering based on encoded mesh
Institute of Scientific and Technical Information of China (English)
QIN Ai-hong; XIONG Hua; PENG Hao-yu; LIU Zhen; SHI Jiao-ying
2006-01-01
Use of compressed mesh in parallel rendering architecture is still an unexplored area, the main challenge of which is to partition and sort the encoded mesh in compression-domain. This paper presents a mesh compression scheme PRMC (Parallel Rendering based Mesh Compression) supplying encoded meshes that can be partitioned and sorted in parallel rendering system even in encoded-domain. First, we segment the mesh into submeshes and clip the submeshes' boundary into Runs, and then piecewise compress the submeshes and Runs respectively. With the help of several auxiliary index tables, compressed submeshes and Runs can serve as rendering primitives in parallel rendering system. Based on PRMC, we design and implement a parallel rendering architecture. Compared with uncompressed representation, experimental results showed that PRMC meshes applied in cluster parallel rendering system can dramatically reduce the communication requirement.
Regional and global benthic δ18O stacks for the last glacial cycle
Lisiecki, Lorraine E.; Stern, Joseph V.
2016-10-01
Although detailed age models exist for some marine sediment records of the last glacial cycle (0-150 ka), age models for many cores rely on the stratigraphic correlation of benthic δ18O, which measures ice volume and deep ocean temperature change. The large amount of data available for the last glacial cycle offers the opportunity to improve upon previous benthic δ18O compilations, such as the "LR04" global stack. Not only are the age constraints for the LR04 stack now outdated but a single global alignment target neglects regional differences of several thousand years in the timing of benthic δ18O change during glacial terminations. Here we present regional stacks that characterize mean benthic δ18O change for 8 ocean regions and a volume-weighted global stack of data from 263 cores. Age models for these stacks are based on radiocarbon data from 0 to 40 ka, correlation to a layer-counted Greenland ice core from 40 to 56 ka, and correlation to radiometrically dated speleothems from 56 to 150 ka. The regional δ18O stacks offer better stratigraphic alignment targets than the LR04 global stack and, furthermore, suggest that the LR04 stack is biased 1-2 kyr too young throughout the Pleistocene. Finally, we compare global and regional benthic δ18O responses with sea level estimates for the last glacial cycle.
Measurement of Heat Flow Transmitted through a Stacked-Screen Regenerator of Thermoacoustic Engine
Directory of Open Access Journals (Sweden)
Shu Han Hsu
2017-03-01
Full Text Available A stacked-screen regenerator is a key component in a thermoacoustic Stirling engine. Therefore, the choice of suitable mesh screens is important in the engine design. To verify the applicability of four empirical equations used in the field of thermoacoustic engines and Stirling engines, this report describes the measurements of heat flow rates transmitted through the stacked screen regenerator inserted in an experimental setup filled with pressurized Argon gas having mean pressure of 0.45 MPa. Results show that the empirical equations reproduce the measured heat flow rates to a mutually similar degree, although their derivation processes differ. Additionally, results suggest that two effective pore radii would be necessary to account for the viscous and thermal behaviors of the gas oscillating in the stacked-screen regenerators.
Balla, Andrea; Quaresima, Silvia; Smolarek, Sebastian; Shalaby, Mostafa; Missori, Giulia; Sileri, Pierpaolo
2017-04-01
This review reports the incidence of mesh-related erosion after ventral mesh rectopexy to determine whether any difference exists in the erosion rate between synthetic and biological mesh. A systematic search of the MEDLINE and the Ovid databases was conducted to identify suitable articles published between 2004 and 2015. The search strategy capture terms were laparoscopic ventral mesh rectopexy, laparoscopic anterior rectopexy, robotic ventral rectopexy, and robotic anterior rectopexy. Eight studies (3,956 patients) were included in this review. Of those patients, 3,517 patients underwent laparoscopic ventral rectopexy (LVR) using synthetic mesh and 439 using biological mesh. Sixty-six erosions were observed with synthetic mesh (26 rectal, 32 vaginal, 8 recto-vaginal fistulae) and one (perineal erosion) with biological mesh. The synthetic and the biological mesh-related erosion rates were 1.87% and 0.22%, respectively. The time between rectopexy and diagnosis of mesh erosion ranged from 1.7 to 124 months. No mesh-related mortalities were reported. The incidence of mesh-related erosion after LVR is low and is more common after the placement of synthetic mesh. The use of biological mesh for LVR seems to be a safer option; however, large, multicenter, randomized, control trials with long follow-ups are required if a definitive answer is to be obtained.
Development and Verification of Unstructured Adaptive Mesh Technique with Edge Compatibility
Ito, Kei; Kunugi, Tomoaki; Ohshima, Hiroyuki
In the design study of the large-sized sodium-cooled fast reactor (JSFR), one key issue is suppression of gas entrainment (GE) phenomena at a gas-liquid interface. Therefore, the authors have been developed a high-precision CFD algorithm to evaluate the GE phenomena accurately. The CFD algorithm has been developed on unstructured meshes to establish an accurate modeling of JSFR system. For two-phase interfacial flow simulations, a high-precision volume-of-fluid algorithm is employed. It was confirmed that the developed CFD algorithm could reproduce the GE phenomena in a simple GE experiment. Recently, the authors have been developed an important technique for the simulation of the GE phenomena in JSFR. That is an unstructured adaptive mesh technique which can apply fine cells dynamically to the region where the GE occurs in JSFR. In this paper, as a part of the development, a two-dimensional unstructured adaptive mesh technique is discussed. In the two-dimensional adaptive mesh technique, each cell is refined isotropically to reduce distortions of the mesh. In addition, connection cells are formed to eliminate the edge incompatibility between refined and non-refined cells. The two-dimensional unstructured adaptive mesh technique is verified by solving well-known lid-driven cavity flow problem. As a result, the two-dimensional unstructured adaptive mesh technique succeeds in providing a high-precision solution, even though poor-quality distorted initial mesh is employed. In addition, the simulation error on the two-dimensional unstructured adaptive mesh is much less than the error on the structured mesh with a larger number of cells.
Directory of Open Access Journals (Sweden)
Jennings Jason
2010-01-01
Full Text Available Laparoscopic inguinal herniorraphy via a transabdominal preperitoneal (TAPP approach using Polypropylene Mesh (Mesh and staples is an accepted technique. Mesh induces a localised inflammatory response that may extend to, and involve, adjacent abdominal and pelvic viscera such as the appendix. We present an interesting case of suspected Mesh-induced appendicitis treated successfully with laparoscopic appendicectomy, without Mesh removal, in an elderly gentleman who presented with symptoms and signs of acute appendicitis 18 months after laparoscopic inguinal hernia repair. Possible mechanisms for Mesh-induced appendicitis are briefly discussed.
Time-predictable Stack Caching
DEFF Research Database (Denmark)
Abbaspourseyedi, Sahar
complicated and less imprecise. Time-predictable computer architectures provide solutions to this problem. As accesses to the data in caches are one source of timing unpredictability, devising methods for improving the timepredictability of caches are important. Stack data, with statically analyzable......Embedded systems are computing systems for controlling and interacting with physical environments. Embedded systems with special timing constraints where the system needs to meet deadlines are referred to as real-time systems. In hard real-time systems, missing a deadline causes the system to fail...... addresses, provides an opportunity to predict and tighten the WCET of accesses to data in caches. In this thesis, we introduce the time-predictable stack cache design and implementation within a time-predictable processor. We introduce several optimizations to our design for tightening the WCET while...
Categorical properties of topological and differentiable stacks
Carchedi, D.J.
2011-01-01
The focus of this PhD research is on the theory of topological and differentiable stacks. There are two main themes of this research. The first, is the creation of the theory of compactly generated stacks, which solve many categorical shortcomings of the theory of classical topological stacks. In pa
PRECISION COSMOGRAPHY WITH STACKED VOIDS
Energy Technology Data Exchange (ETDEWEB)
Lavaux, Guilhem [Department of Physics, University of Illinois at Urbana-Champaign, 1002 West Green Street, Urbana, IL 61801 (United States); Wandelt, Benjamin D. [UPMC Univ Paris 06, UMR 7095, Institut d' Astrophysique de Paris, 98 bis, boulevard Arago, 75014 Paris (France)
2012-08-01
We present a purely geometrical method for probing the expansion history of the universe from the observation of the shape of stacked voids in spectroscopic redshift surveys. Our method is an Alcock-Paczynski (AP) test based on the average sphericity of voids posited on the local isotropy of the universe. It works by comparing the temporal extent of cosmic voids along the line of sight with their angular, spatial extent. We describe the algorithm that we use to detect and stack voids in redshift shells on the light cone and test it on mock light cones produced from N-body simulations. We establish a robust statistical model for estimating the average stretching of voids in redshift space and quantify the contamination by peculiar velocities. Finally, assuming that the void statistics that we derive from N-body simulations is preserved when considering galaxy surveys, we assess the capability of this approach to constrain dark energy parameters. We report this assessment in terms of the figure of merit (FoM) of the dark energy task force and in particular of the proposed Euclid mission which is particularly suited for this technique since it is a spectroscopic survey. The FoM due to stacked voids from the Euclid wide survey may double that of all other dark energy probes derived from Euclid data alone (combined with Planck priors). In particular, voids seem to outperform baryon acoustic oscillations by an order of magnitude. This result is consistent with simple estimates based on mode counting. The AP test based on stacked voids may be a significant addition to the portfolio of major dark energy probes and its potentialities must be studied in detail.
An effective quadrilateral mesh adaptation
Institute of Scientific and Technical Information of China (English)
KHATTRI Sanjay Kumar
2006-01-01
Accuracy of a simulation strongly depends on the grid quality. Here, quality means orthogonality at the boundaries and quasi-orthogonality within the critical regions, smoothness, bounded aspect ratios and solution adaptive behaviour. It is not recommended to refine the parts of the domain where the solution shows little variation. It is desired to concentrate grid points and cells in the part of the domain where the solution shows strong gradients or variations. We present a simple, effective and computationally efficient approach for quadrilateral mesh adaptation. Several numerical examples are presented for supporting our claim.
Anisotropic Diffusion in Mesh-Free Numerical Magnetohydrodynamics
Hopkins, Philip F
2016-01-01
We extend recently-developed mesh-free Lagrangian methods for numerical magnetohydrodynamics (MHD) to arbitrary anisotropic diffusion equations, including: passive scalar diffusion, Spitzer-Braginskii conduction and viscosity, cosmic ray diffusion/streaming, anisotropic radiation transport, non-ideal MHD (Ohmic resistivity, ambipolar diffusion, the Hall effect), and turbulent 'eddy diffusion.' We study these as implemented in the code GIZMO for both new meshless finite-volume Godunov schemes (MFM/MFV) as well as smoothed-particle hydrodynamics (SPH). We show the MFM/MFV methods are accurate and stable even with noisy fields and irregular particle arrangements, and recover the correct behavior even in arbitrarily anisotropic cases. They are competitive with state-of-the-art AMR/moving-mesh methods, and can correctly treat anisotropic diffusion-driven instabilities (e.g. the MTI and HBI, Hall MRI). We also develop a new scheme for stabilizing anisotropic tensor-valued fluxes with high-order gradient estimators ...
Proceedings of the 20th International Meshing Roundtable
2012-01-01
This volume contains the articles presented at the 20th International Meshing Roundtable (IMR) organized, in part, by Sandia National Laboratories and was held in Paris, France on Oct 23-26, 2011. This is the first year the IMR was held outside the United States territory. Other sponsors of the 20th IMR are Systematic Paris Region Systems & ICT Cluster, AIAA, NAFEMS, CEA, and NSF. The Sandia National Laboratories started the first IMR in 1992, and the conference has been held annually since. Each year the IMR brings together researchers, developers, and application experts, from a variety of disciplines, to present and discuss ideas on mesh generation and related topics. The topics covered by the IMR have applications in numerical analysis, computational geometry, computer graphics, as well as other areas, and the presentations describe novel work ranging from theory to application. .
A moving mesh unstaggered constrained transport scheme for magnetohydrodynamics
Mocz, Philip; Springel, Volker; Vogelsberger, Mark; Marinacci, Federico; Hernquist, Lars
2016-01-01
We present a constrained transport (CT) algorithm for solving the 3D ideal magnetohydrodynamic (MHD) equations on a moving mesh, which maintains the divergence-free condition on the magnetic field to machine-precision. Our CT scheme uses an unstructured representation of the magnetic vector potential, making the numerical method simple and computationally efficient. The scheme is implemented in the moving mesh code Arepo. We demonstrate the performance of the approach with simulations of driven MHD turbulence, a magnetized disc galaxy, and a cosmological volume with primordial magnetic field. We compare the outcomes of these experiments to those obtained with a previously implemented Powell divergence-cleaning scheme. While CT and the Powell technique yield similar results in idealized test problems, some differences are seen in situations more representative of astrophysical flows. In the turbulence simulations, the Powell cleaning scheme artificially grows the mean magnetic field, while CT maintains this co...
Kinetic mesh-free method for flutter prediction in turbomachines
Indian Academy of Sciences (India)
V Ramesh; S M Deshpande
2014-02-01
The present paper deals with the development and application of a kinetic theory-based mesh-free method for unsteady flows. The method has the capability to compute on any arbitrary distribution of moving nodes. In general, computation of unsteady flow past multiple moving boundaries using conventional finite volume solvers are quite involved. They invariably require repeated grid generation or an efficient grid movement strategy. This approach becomes more difficult when there are many moving boundaries. In the present work, we propose a simple and an effective node movement strategy for the mesh-free solver. This can tackle the unsteady problems with moving boundaries in a much easier way. Using the present method we have computed unsteady flow in oscillating turbomachinery blades. A simple energy method has been used to predict flutter using the unsteady computations. The results compare well with the available experiments and other computations.
Smooth Rotation Enhanced As-Rigid-As-Possible Mesh Animation.
Levi, Zohar; Gotsman, Craig
2015-02-01
In recent years, the As-Rigid-As-Possible (ARAP) shape deformation and shape interpolation techniques gained popularity, and the ARAP energy was successfully used in other applications as well. We improve the ARAP animation technique in two aspects. First, we introduce a new ARAP-type energy, named SR-ARAP, which has a consistent discretization for surfaces (triangle meshes). The quality of our new surface deformation scheme competes with the quality of the volumetric ARAP deformation (for tetrahedral meshes). Second, we propose a new ARAP shape interpolation method that is superior to prior art also based on the ARAP energy. This method is compatible with our new SR-ARAP energy, as well as with the ARAP volume energy.
Block-Structured Adaptive Mesh Refinement Algorithms for Vlasov Simulation
Hittinger, J A F
2012-01-01
Direct discretization of continuum kinetic equations, like the Vlasov equation, are under-utilized because the distribution function generally exists in a high-dimensional (>3D) space and computational cost increases geometrically with dimension. We propose to use high-order finite-volume techniques with block-structured adaptive mesh refinement (AMR) to reduce the computational cost. The primary complication comes from a solution state comprised of variables of different dimensions. We develop the algorithms required to extend standard single-dimension block structured AMR to the multi-dimension case. Specifically, algorithms for reduction and injection operations that transfer data between mesh hierarchies of different dimensions are explained in detail. In addition, modifications to the basic AMR algorithm that enable the use of high-order spatial and temporal discretizations are discussed. Preliminary results for a standard 1D+1V Vlasov-Poisson test problem are presented. Results indicate that there is po...
Bluetooth Low Energy Mesh Networks: A Survey.
Darroudi, Seyed Mahdi; Gomez, Carles
2017-06-22
Bluetooth Low Energy (BLE) has gained significant momentum. However, the original design of BLE focused on star topology networking, which limits network coverage range and precludes end-to-end path diversity. In contrast, other competing technologies overcome such constraints by supporting the mesh network topology. For these reasons, academia, industry, and standards development organizations have been designing solutions to enable BLE mesh networks. Nevertheless, the literature lacks a consolidated view on this emerging area. This paper comprehensively surveys state of the art BLE mesh networking. We first provide a taxonomy of BLE mesh network solutions. We then review the solutions, describing the variety of approaches that leverage existing BLE functionality to enable BLE mesh networks. We identify crucial aspects of BLE mesh network solutions and discuss their advantages and drawbacks. Finally, we highlight currently open issues.
Mesh networking optimized for robotic teleoperation
Hart, Abraham; Pezeshkian, Narek; Nguyen, Hoa
2012-06-01
Mesh networks for robot teleoperation pose different challenges than those associated with traditional mesh networks. Unmanned ground vehicles (UGVs) are mobile and operate in constantly changing and uncontrollable environments. Building a mesh network to work well under these harsh conditions presents a unique challenge. The Manually Deployed Communication Relay (MDCR) mesh networking system extends the range of and provides non-line-of-sight (NLOS) communications for tactical and explosive ordnance disposal (EOD) robots currently in theater. It supports multiple mesh nodes, robots acting as nodes, and works with all Internet Protocol (IP)-based robotic systems. Under MDCR, the performance of different routing protocols and route selection metrics were compared resulting in a modified version of the Babel mesh networking protocol. This paper discusses this and other topics encountered during development and testing of the MDCR system.
MPDATA error estimator for mesh adaptivity
Szmelter, Joanna; Smolarkiewicz, Piotr K.
2006-04-01
In multidimensional positive definite advection transport algorithm (MPDATA) the leading error as well as the first- and second-order solutions are known explicitly by design. This property is employed to construct refinement indicators for mesh adaptivity. Recent progress with the edge-based formulation of MPDATA facilitates the use of the method in an unstructured-mesh environment. In particular, the edge-based data structure allows for flow solvers to operate on arbitrary hybrid meshes, thereby lending itself to implementations of various mesh adaptivity techniques. A novel unstructured-mesh nonoscillatory forward-in-time (NFT) solver for compressible Euler equations is used to illustrate the benefits of adaptive remeshing as well as mesh movement and enrichment for the efficacy of MPDATA-based flow solvers. Validation against benchmark test cases demonstrates robustness and accuracy of the approach.
Bluetooth Low Energy Mesh Networks: A Survey
Darroudi, Seyed Mahdi; Gomez, Carles
2017-01-01
Bluetooth Low Energy (BLE) has gained significant momentum. However, the original design of BLE focused on star topology networking, which limits network coverage range and precludes end-to-end path diversity. In contrast, other competing technologies overcome such constraints by supporting the mesh network topology. For these reasons, academia, industry, and standards development organizations have been designing solutions to enable BLE mesh networks. Nevertheless, the literature lacks a consolidated view on this emerging area. This paper comprehensively surveys state of the art BLE mesh networking. We first provide a taxonomy of BLE mesh network solutions. We then review the solutions, describing the variety of approaches that leverage existing BLE functionality to enable BLE mesh networks. We identify crucial aspects of BLE mesh network solutions and discuss their advantages and drawbacks. Finally, we highlight currently open issues. PMID:28640183
Development and acceleration of unstructured mesh-based cfd solver
Emelyanov, V.; Karpenko, A.; Volkov, K.
2017-06-01
The study was undertaken as part of a larger effort to establish a common computational fluid dynamics (CFD) code for simulation of internal and external flows and involves some basic validation studies. The governing equations are solved with ¦nite volume code on unstructured meshes. The computational procedure involves reconstruction of the solution in each control volume and extrapolation of the unknowns to find the flow variables on the faces of control volume, solution of Riemann problem for each face of the control volume, and evolution of the time step. The nonlinear CFD solver works in an explicit time-marching fashion, based on a three-step Runge-Kutta stepping procedure. Convergence to a steady state is accelerated by the use of geometric technique and by the application of Jacobi preconditioning for high-speed flows, with a separate low Mach number preconditioning method for use with low-speed flows. The CFD code is implemented on graphics processing units (GPUs). Speedup of solution on GPUs with respect to solution on central processing units (CPU) is compared with the use of different meshes and different methods of distribution of input data into blocks. The results obtained provide promising perspective for designing a GPU-based software framework for applications in CFD.
Unstructured Polyhedral Mesh Thermal Radiation Diffusion
Energy Technology Data Exchange (ETDEWEB)
Palmer, T.S.; Zika, M.R.; Madsen, N.K.
2000-07-27
Unstructured mesh particle transport and diffusion methods are gaining wider acceptance as mesh generation, scientific visualization and linear solvers improve. This paper describes an algorithm that is currently being used in the KULL code at Lawrence Livermore National Laboratory to solve the radiative transfer equations. The algorithm employs a point-centered diffusion discretization on arbitrary polyhedral meshes in 3D. We present the results of a few test problems to illustrate the capabilities of the radiation diffusion module.
Delaunay triangulation and computational fluid dynamics meshes
Posenau, Mary-Anne K.; Mount, David M.
1992-01-01
In aerospace computational fluid dynamics (CFD) calculations, the Delaunay triangulation of suitable quadrilateral meshes can lead to unsuitable triangulated meshes. Here, we present case studies which illustrate the limitations of using structured grid generation methods which produce points in a curvilinear coordinate system for subsequent triangulations for CFD applications. We discuss conditions under which meshes of quadrilateral elements may not produce a Delaunay triangulation suitable for CFD calculations, particularly with regard to high aspect ratio, skewed quadrilateral elements.
Design of electrospinning mesh devices
Russo, Giuseppina; Peters, Gerrit W. M.; Solberg, Ramon H. M.; Vittoria, Vittoria
2012-07-01
This paper describes the features of new membranes that can act as local biomedical devices owing to their peculiar shape in the form of mesh structure. These materials are designed to provide significant effects to reduce local inflammations and improve the tissue regeneration. Lamellar Hydrotalcite loaded with Diclofenac Sodium (HTLc-DIK) was homogenously dispersed inside a polymeric matrix of Poly-caprolactone (PCL) to manufacture membranes by electrospinning technique. The experimental procedure and the criteria employed have shown to be extremely effective at increasing potentiality and related applications. The employed technique has proved to be very useful to manufacture polymeric fibers with diameters in the range of nano-micro scale. In this work a dedicated collector based on a proprietary technology of IME Technologies and Eindhoven University of Technology (TU/e) was used. It allowed to obtain devices with a macro shape of a 3D-mesh. Atomic Force Microscopy (AFM) highlights a very interesting texture of the electrospun fibers. They show a lamellar morphology that is only slightly modified by the inclusion of the interclay embedded in the devices to control the drug release phenomena.
Conformal refinement of unstructured quadrilateral meshes
Energy Technology Data Exchange (ETDEWEB)
Garmella, Rao [Los Alamos National Laboratory
2009-01-01
We present a multilevel adaptive refinement technique for unstructured quadrilateral meshes in which the mesh is kept conformal at all times. This means that the refined mesh, like the original, is formed of only quadrilateral elements that intersect strictly along edges or at vertices, i.e., vertices of one quadrilateral element do not lie in an edge of another quadrilateral. Elements are refined using templates based on 1:3 refinement of edges. We demonstrate that by careful design of the refinement and coarsening strategy, we can maintain high quality elements in the refined mesh. We demonstrate the method on a number of examples with dynamically changing refinement regions.
MOAB : a mesh-oriented database.
Energy Technology Data Exchange (ETDEWEB)
Tautges, Timothy James; Ernst, Corey; Stimpson, Clint; Meyers, Ray J.; Merkley, Karl
2004-04-01
A finite element mesh is used to decompose a continuous domain into a discretized representation. The finite element method solves PDEs on this mesh by modeling complex functions as a set of simple basis functions with coefficients at mesh vertices and prescribed continuity between elements. The mesh is one of the fundamental types of data linking the various tools in the FEA process (mesh generation, analysis, visualization, etc.). Thus, the representation of mesh data and operations on those data play a very important role in FEA-based simulations. MOAB is a component for representing and evaluating mesh data. MOAB can store structured and unstructured mesh, consisting of elements in the finite element 'zoo'. The functional interface to MOAB is simple yet powerful, allowing the representation of many types of metadata commonly found on the mesh. MOAB is optimized for efficiency in space and time, based on access to mesh in chunks rather than through individual entities, while also versatile enough to support individual entity access. The MOAB data model consists of a mesh interface instance, mesh entities (vertices and elements), sets, and tags. Entities are addressed through handles rather than pointers, to allow the underlying representation of an entity to change without changing the handle to that entity. Sets are arbitrary groupings of mesh entities and other sets. Sets also support parent/child relationships as a relation distinct from sets containing other sets. The directed-graph provided by set parent/child relationships is useful for modeling topological relations from a geometric model or other metadata. Tags are named data which can be assigned to the mesh as a whole, individual entities, or sets. Tags are a mechanism for attaching data to individual entities and sets are a mechanism for describing relations between entities; the combination of these two mechanisms is a powerful yet simple interface for representing metadata or application
Performance model of a recirculating stack nickel hydrogen cell
Zimmerman, Albert H.
1994-01-01
A theoretical model of the nickel hydrogen battery cell has been utilized to describe the chemical and physical changes during charge and overcharge in a recirculating stack nickel hydrogen cell. In particular, the movement of gas and electrolyte have been examined as a function of the amount of electrolyte put into the cell stack during cell activation, and as a function of flooding in regions of the gas screen in this cell design. Additionally, a two-dimensional variation on this model has been utilized to describe the effects of non-uniform loading in the nickel-electrode on the movement of gas and electrolyte within the recirculating stack nickel hydrogen cell. The type of nonuniform loading that has been examined here is that associated with higher than average loading near the surface of the sintered nickel electrode, a condition present to some degree in many nickel electrodes made by electrochemical impregnation methods. The effects of high surface loading were examined primarily under conditions of overcharge, since the movement of gas and electrolyte in the overcharging condition was typically where the greatest effects of non-uniform loading were found. The results indicate that significant changes in the capillary forces between cell components occur as the percentage of free volume in the stack filled by electrolyte becomes very high. These changes create large gradients in gas-filled space and oxygen concentrations near the boundary between the separator and the hydrogen electrode when the electrolyte fill is much greater than about 95 percent of the stack free volume. At lower electrolyte fill levels, these gaseous and electrolyte gradients become less extreme, and shift through the separator towards the nickel electrode. Similarly, flooding of areas in the gas screen cause higher concentrations of oxygen gas to approach the platinum/hydrogen electrode that is opposite the back side of the nickel electrode. These results illustrate the need for
Solid Oxide Fuel Cell Stack Diagnostics
DEFF Research Database (Denmark)
Mosbæk, Rasmus Rode; Barfod, Rasmus Gottrup
. An operating stack is subject to compositional gradients in the gaseous reactant streams, and temperature gradients across each cell and across the stack, which complicates detailed analysis. Several experimental stacks from Topsoe Fuel Cell A/S were characterized using Electrochemical Impedance Spectroscopy...... and discussed in the following. Parallel acquisition using electrochemical impedance spectroscopy can be used to detect possible minor differences in the supply of gas to the individual cells, which is important when going to high fuel utilizations. The fuel flow distribution was determined and provides...... carried out on an experimental 14-cell SOFC stack at varying frequencies and fuel utilizations. The results illustrated that THD can be used to detect increasing non-linearities in the current-voltage characteristics of the stack when the stack suffers from fuel starvation by monitoring the stack sum...
Energy Technology Data Exchange (ETDEWEB)
Brodzik, P.
2009-04-15
The article discusses the successful introduction of Derrick Corporation's Stack Sizer technology for removing minus 200 mesh slimes from 6-inch coal hydrocyclone underflow prior to froth flotation or dewatering by screen bowl centrifuges. In 2006, the James River Coal Company selected the Stack Sizer fitted with Derrick 150 micron and 100 micron urethane screen panels for removal of the minus 100 mesh high ash clay fraction from the clean coal spiral product circuits. After this application proved successful, Derrick Corporation introduced new 75 micron urethane screen panels for use on the Stack Sizer. Evaluation of feed slurry to flotation cells and screen bowl centrifuges showed significant amounts of minus 75 micron that could potentially be removed by efficient screening technology. Removal of the minus 75 micron fraction was sought to reduce ash and moisture content of the final clean coal product. Full-scale lab tests confirmed that the Stack Sizer fitted with Derrick 75 micron urethane screen panels consistently reduced the minus 75 micron percentage in coal slurry from 6-inch clean coal hydrocyclone underflow that is approximately 15 to 20% solid by-weight and 30 to 60% minus 75 micron to a clean coal fraction that is approximately 13 to 16% minus 75 micron. As a result total ash is reduced from approximately 36 to 38% in the hydrocyclone underflow to 14 to 16% in the oversize product fraction form the Stack Sizers. 1 fig., 2 tabs., 5 photos.
Energy Technology Data Exchange (ETDEWEB)
Balaven-Clermidy, S.
2001-12-01
Oil reservoir simulations study multiphase flows in porous media. These flows are described and evaluated through numerical schemes on a discretization of the reservoir domain. In this thesis, we were interested in this spatial discretization and a new kind of hybrid mesh has been proposed where the radial nature of flows in the vicinity of wells is directly taken into account in the geometry. Our modular approach described wells and their drainage area through radial circular meshes. These well meshes are inserted in a structured reservoir mesh (a Corner Point Geometry mesh) made up with hexahedral cells. Finally, in order to generate a global conforming mesh, proper connections are realized between the different kinds of meshes through unstructured transition ones. To compute these transition meshes that we want acceptable in terms of finite volume methods, an automatic method based on power diagrams has been developed. Our approach can deal with a homogeneous anisotropic medium and allows the user to insert vertical or horizontal wells as well as secondary faults in the reservoir mesh. Our work has been implemented, tested and validated in 2D and 2D1/2. It can also be extended in 3D when the geometrical constraints are simplicial ones: points, segments and triangles. (author)
The view from the boundary: a new void stacking method
Cautun, Marius; Frenk, Carlos S
2015-01-01
We introduce a new method for stacking voids and deriving their profile that greatly increases the potential of voids as a tool for precision cosmology. Given that voids are highly non-spherical and have most of their mass at their edge, voids are better described relative to their boundary rather than relative to their centre, as in the conventional spherical stacking approach. The boundary profile is obtained by computing the distance of each volume element from the void boundary. Voids can then be stacked and their profiles computed as a function of this boundary distance. This approach enhances the weak lensing signal of voids, both shear and convergence, by a factor of two when compared to the spherical stacking method. It also results in steeper void density profiles that are characterised by a very slow rise inside the void and a pronounced density ridge at the void boundary, in qualitative agreement with theoretical models of expanding spherical underdensities. The resulting boundary density profile i...
Novel fuel cell stack with coupled metal hydride containers
Liu, Zhixiang; Li, Yan; Bu, Qingyuan; Guzy, Christopher J.; Li, Qi; Chen, Weirong; Wang, Cheng
2016-10-01
Air-cooled, self-humidifying hydrogen fuel cells are often used for backup and portable power sources, with a metal hydride used as the hydrogen storage material. To provide a stable hydrogen flow to the fuel cell stack, heat must be provided to the metal hydride. Conventionally, the heat released from the exothermic reaction of hydrogen and oxygen in the fuel cell stack to the exhaust air is used to heat a separate metal hydride container. In this case, the heat is only partially used instead of being more closely coupled because of the heat transfer resistances in the system. To achieve better heat integration, a novel scheme is proposed whereby hydrogen storage and single fuel cells are more closely coupled. Based on this idea, metal hydride containers in the form of cooling plates were assembled between each pair of cells in the stack so that the heat could be directly transferred to a metal hydride container of much larger surface-to-volume ratio than conventional separate containers. A heat coupled fuel cell portable power source with 10 cells and 11 metal hydride containers was constructed and the experimental results show that this scheme is beneficial for the heat management of fuel cell stack.
Mesh Exposure and Associated Risk Factors in Women Undergoing Transvaginal Prolapse Repair with Mesh
Directory of Open Access Journals (Sweden)
Elizabeth A. Frankman
2013-01-01
Full Text Available Objective. To determine frequency, rate, and risk factors associated with mesh exposure in women undergoing transvaginal prolapse repair with polypropylene mesh. Methods. Retrospective chart review was performed for all women who underwent Prolift Pelvic Floor Repair System (Gynecare, Somerville, NJ between September 2005 and September 2008. Multivariable logistic regression was performed to identify risk factors for mesh exposure. Results. 201 women underwent Prolift. Mesh exposure occurred in 12% (24/201. Median time to mesh exposure was 62 days (range: 10–372. When mesh was placed in the anterior compartment, the frequency of mesh exposure was higher than that when mesh was placed in the posterior compartment (8.7% versus 2.9%, P=0.04. Independent risk factors for mesh exposure were diabetes (AOR = 7.7, 95% CI 1.6–37.6; P=0.01 and surgeon (AOR = 7.3, 95% CI 1.9–28.6; P=0.004. Conclusion. Women with diabetes have a 7-fold increased risk for mesh exposure after transvaginal prolapse repair using Prolift. The variable rate of mesh exposure amongst surgeons may be related to technique. The anterior vaginal wall may be at higher risk of mesh exposure as compared to the posterior vaginal wall.
Tensile Behaviour of Welded Wire Mesh and Hexagonal Metal Mesh for Ferrocement Application
Tanawade, A. G.; Modhera, C. D.
2017-08-01
Tension tests were conducted on welded mesh and hexagonal Metal mesh. Welded Mesh is available in the market in different sizes. The two types are analysed viz. Ø 2.3 mm and Ø 2.7 mm welded mesh, having opening size 31.75 mm × 31.75 mm and 25.4 mm × 25.4 mm respectively. Tensile strength test was performed on samples of welded mesh in three different orientations namely 0°, 30° and 45° degrees with the loading axis and hexagonal Metal mesh of Ø 0.7 mm, having opening 19.05 × 19.05 mm. Experimental tests were conducted on samples of these meshes. The objective of this study was to investigate the behaviour of the welded mesh and hexagonal Metal mesh. The result shows that the tension load carrying capacity of welded mesh of Ø 2.7 mm of 0° orientation is good as compared to Ø2.3 mm mesh and ductility of hexagonal Metal mesh is good in behaviour.
Polymer-based mesh as supports for multi-layered 3D cell culture and assays.
Simon, Karen A; Park, Kyeng Min; Mosadegh, Bobak; Subramaniam, Anand Bala; Mazzeo, Aaron D; Ngo, Philip M; Whitesides, George M
2014-01-01
Three-dimensional (3D) culture systems can mimic certain aspects of the cellular microenvironment found in vivo, but generation, analysis and imaging of current model systems for 3D cellular constructs and tissues remain challenging. This work demonstrates a 3D culture system-Cells-in-Gels-in-Mesh (CiGiM)-that uses stacked sheets of polymer-based mesh to support cells embedded in gels to form tissue-like constructs; the stacked sheets can be disassembled by peeling the sheets apart to analyze cultured cells-layer-by-layer-within the construct. The mesh sheets leave openings large enough for light to pass through with minimal scattering, and thus allowing multiple options for analysis-(i) using straightforward analysis by optical light microscopy, (ii) by high-resolution analysis with fluorescence microscopy, or (iii) with a fluorescence gel scanner. The sheets can be patterned into separate zones with paraffin film-based decals, in order to conduct multiple experiments in parallel; the paraffin-based decal films also block lateral diffusion of oxygen effectively. CiGiM simplifies the generation and analysis of 3D culture without compromising throughput, and quality of the data collected: it is especially useful in experiments that require control of oxygen levels, and isolation of adjacent wells in a multi-zone format.
A Novel Coarsening Method for Scalable and Efficient Mesh Generation
Energy Technology Data Exchange (ETDEWEB)
Yoo, A; Hysom, D; Gunney, B
2010-12-02
In this paper, we propose a novel mesh coarsening method called brick coarsening method. The proposed method can be used in conjunction with any graph partitioners and scales to very large meshes. This method reduces problem space by decomposing the original mesh into fixed-size blocks of nodes called bricks, layered in a similar way to conventional brick laying, and then assigning each node of the original mesh to appropriate brick. Our experiments indicate that the proposed method scales to very large meshes while allowing simple RCB partitioner to produce higher-quality partitions with significantly less edge cuts. Our results further indicate that the proposed brick-coarsening method allows more complicated partitioners like PT-Scotch to scale to very large problem size while still maintaining good partitioning performance with relatively good edge-cut metric. Graph partitioning is an important problem that has many scientific and engineering applications in such areas as VLSI design, scientific computing, and resource management. Given a graph G = (V,E), where V is the set of vertices and E is the set of edges, (k-way) graph partitioning problem is to partition the vertices of the graph (V) into k disjoint groups such that each group contains roughly equal number of vertices and the number of edges connecting vertices in different groups is minimized. Graph partitioning plays a key role in large scientific computing, especially in mesh-based computations, as it is used as a tool to minimize the volume of communication and to ensure well-balanced load across computing nodes. The impact of graph partitioning on the reduction of communication can be easily seen, for example, in different iterative methods to solve a sparse system of linear equation. Here, a graph partitioning technique is applied to the matrix, which is basically a graph in which each edge is a non-zero entry in the matrix, to allocate groups of vertices to processors in such a way that many of
Adaptive mesh refinement in titanium
Energy Technology Data Exchange (ETDEWEB)
Colella, Phillip; Wen, Tong
2005-01-21
In this paper, we evaluate Titanium's usability as a high-level parallel programming language through a case study, where we implement a subset of Chombo's functionality in Titanium. Chombo is a software package applying the Adaptive Mesh Refinement methodology to numerical Partial Differential Equations at the production level. In Chombo, the library approach is used to parallel programming (C++ and Fortran, with MPI), whereas Titanium is a Java dialect designed for high-performance scientific computing. The performance of our implementation is studied and compared with that of Chombo in solving Poisson's equation based on two grid configurations from a real application. Also provided are the counts of lines of code from both sides.
Mesh refinement strategy for optimal control problems
Paiva, L. T.; Fontes, F. A. C. C.
2013-10-01
Direct methods are becoming the most used technique to solve nonlinear optimal control problems. Regular time meshes having equidistant spacing are frequently used. However, in some cases these meshes cannot cope accurately with nonlinear behavior. One way to improve the solution is to select a new mesh with a greater number of nodes. Another way, involves adaptive mesh refinement. In this case, the mesh nodes have non equidistant spacing which allow a non uniform nodes collocation. In the method presented in this paper, a time mesh refinement strategy based on the local error is developed. After computing a solution in a coarse mesh, the local error is evaluated, which gives information about the subintervals of time domain where refinement is needed. This procedure is repeated until the local error reaches a user-specified threshold. The technique is applied to solve the car-like vehicle problem aiming minimum consumption. The approach developed in this paper leads to results with greater accuracy and yet with lower overall computational time as compared to using a time meshes having equidistant spacing.
7th International Meshing Roundtable '98
Energy Technology Data Exchange (ETDEWEB)
Eldred, T.J.
1998-10-01
The goal of the 7th International Meshing Roundtable is to bring together researchers and developers from industry, academia, and government labs in a stimulating, open environment for the exchange of technical information related to the meshing process. In the past, the Roundtable has enjoyed significant participation from each of these groups from a wide variety of countries.
Laparoscopic Pelvic Floor Repair Using Polypropylene Mesh
Directory of Open Access Journals (Sweden)
Shih-Shien Weng
2008-09-01
Conclusion: Laparoscopic pelvic floor repair using a single piece of polypropylene mesh combined with uterosacral ligament suspension appears to be a feasible procedure for the treatment of advanced vaginal vault prolapse and enterocele. Fewer mesh erosions and postoperative pain syndromes were seen in patients who had no previous pelvic floor reconstructive surgery.
A comparison of tetrahedral mesh improvement techniques
Energy Technology Data Exchange (ETDEWEB)
Freitag, L.A.; Ollivier-Gooch, C. [Argonne National Lab., IL (United States). Mathematics and Computer Science Div.
1996-12-01
Automatic mesh generation and adaptive refinement methods for complex three-dimensional domains have proven to be very successful tools for the efficient solution of complex applications problems. These methods can, however, produce poorly shaped elements that cause the numerical solution to be less accurate and more difficult to compute. Fortunately, the shape of the elements can be improved through several mechanisms, including face-swapping techniques that change local connectivity and optimization-based mesh smoothing methods that adjust grid point location. The authors consider several criteria for each of these two methods and compare the quality of several meshes obtained by using different combinations of swapping and smoothing. Computational experiments show that swapping is critical to the improvement of general mesh quality and that optimization-based smoothing is highly effective in eliminating very small and very large angles. The highest quality meshes are obtained by using a combination of swapping and smoothing techniques.
Generation of high order geometry representations in Octree meshes
Directory of Open Access Journals (Sweden)
Harald G. Klimach
2015-11-01
Full Text Available We propose a robust method to convert triangulated surface data into polynomial volume data. Such polynomial representations are required for high-order partial differential solvers, as low-order surface representations would diminish the accuracy of their solution. Our proposed method deploys a first order spatial bisection algorithm to find robustly an approximation of given geometries. The resulting voxelization is then used to generate Legendre polynomials of arbitrary degree. By embedding the locally defined polynomials in cubical elements of a coarser mesh, this method can reliably approximate even complex structures, like porous media. It thereby is possible to provide appropriate material definitions for high order discontinuous Galerkin schemes. We describe the method to construct the polynomial and how it fits into the overall mesh generation. Our discussion includes numerical properties of the method and we show some results from applying it to various geometries. We have implemented the described method in our mesh generator Seeder, which is publically available under a permissive open-source license.
Anisotropic diffusion in mesh-free numerical magnetohydrodynamics
Hopkins, Philip F.
2017-04-01
We extend recently developed mesh-free Lagrangian methods for numerical magnetohydrodynamics (MHD) to arbitrary anisotropic diffusion equations, including: passive scalar diffusion, Spitzer-Braginskii conduction and viscosity, cosmic ray diffusion/streaming, anisotropic radiation transport, non-ideal MHD (Ohmic resistivity, ambipolar diffusion, the Hall effect) and turbulent 'eddy diffusion'. We study these as implemented in the code GIZMO for both new meshless finite-volume Godunov schemes (MFM/MFV). We show that the MFM/MFV methods are accurate and stable even with noisy fields and irregular particle arrangements, and recover the correct behaviour even in arbitrarily anisotropic cases. They are competitive with state-of-the-art AMR/moving-mesh methods, and can correctly treat anisotropic diffusion-driven instabilities (e.g. the MTI and HBI, Hall MRI). We also develop a new scheme for stabilizing anisotropic tensor-valued fluxes with high-order gradient estimators and non-linear flux limiters, which is trivially generalized to AMR/moving-mesh codes. We also present applications of some of these improvements for SPH, in the form of a new integral-Godunov SPH formulation that adopts a moving-least squares gradient estimator and introduces a flux-limited Riemann problem between particles.
Precision cosmography with stacked voids
Lavaux, Guilhem
2011-01-01
We present a purely geometrical method for probing the expansion history of the Universe from the observation of the shape of stacked voids in spectroscopic re dshift surveys. Our method is an Alcock-Pasczinsky test based on the average sphericity of voids posited on the local isotropy of the Universe. It works by comparing the temporal extent of cosmic voids along the line of sight with their angular, spatial extent. We describe the algorithm that we use to detect and stack voids in redshift shells on the light cone and test it on mock light cones produced from N-body simulations. We establish a robust statistical model for estimating the average stretching of voids in redshift space and quantify the contamination by peculiar velocities. Finally, we assess the capability of this approach to constrain dark energy parameters in terms of the figure of merit (FoM) of the dark energy task force and in particular of the proposed Euclid mission which is particularly suited for this technique since it is a spectrosc...
Characteristics of Mesh Wave Impedance in FDTD Non-Uniform Mesh
Institute of Scientific and Technical Information of China (English)
REN Wu; LIU Bo; GAO Ben-qing
2005-01-01
In order to increase the evaluating precision of mesh reflection wave, the mesh wave impedance(MWI) is extended to the non-uniform mesh in 1-D and 2-D cases for the first time on the basis of the Yee's positional relation for electromagnetic field components. Lots of characteristics are obtained for different mesh sizes and frequencies. Then the reflection coefficient caused by the non-uniform mesh can be calculated according to the theory of equivalent transmission line. By comparing it with that calculated by MWI in the uniform mesh, it is found that the evaluating error can be largely reduced and is in good agreement with that directly computed by FDTD method. And this extension of MWI can be used in the error analysis of complex mesh.
Update on Development of Mesh Generation Algorithms in MeshKit
Energy Technology Data Exchange (ETDEWEB)
Jain, Rajeev [Argonne National Lab. (ANL), Argonne, IL (United States); Vanderzee, Evan [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay [Argonne National Lab. (ANL), Argonne, IL (United States)
2015-09-30
MeshKit uses a graph-based design for coding all its meshing algorithms, which includes the Reactor Geometry (and mesh) Generation (RGG) algorithms. This report highlights the developmental updates of all the algorithms, results and future work. Parallel versions of algorithms, documentation and performance results are reported. RGG GUI design was updated to incorporate new features requested by the users; boundary layer generation and parallel RGG support were added to the GUI. Key contributions to the release, upgrade and maintenance of other SIGMA1 libraries (CGM and MOAB) were made. Several fundamental meshing algorithms for creating a robust parallel meshing pipeline in MeshKit are under development. Results and current status of automated, open-source and high quality nuclear reactor assembly mesh generation algorithms such as trimesher, quadmesher, interval matching and multi-sweeper are reported.
Interactive histology of large-scale biomedical image stacks.
Jeong, Won-Ki; Schneider, Jens; Turney, Stephen G; Faulkner-Jones, Beverly E; Meyer, Dominik; Westermann, Rüdiger; Reid, R Clay; Lichtman, Jeff; Pfister, Hanspeter
2010-01-01
Histology is the study of the structure of biological tissue using microscopy techniques. As digital imaging technology advances, high resolution microscopy of large tissue volumes is becoming feasible; however, new interactive tools are needed to explore and analyze the enormous datasets. In this paper we present a visualization framework that specifically targets interactive examination of arbitrarily large image stacks. Our framework is built upon two core techniques: display-aware processing and GPU-accelerated texture compression. With display-aware processing, only the currently visible image tiles are fetched and aligned on-the-fly, reducing memory bandwidth and minimizing the need for time-consuming global pre-processing. Our novel texture compression scheme for GPUs is tailored for quick browsing of image stacks. We evaluate the usability of our viewer for two histology applications: digital pathology and visualization of neural structure at nanoscale-resolution in serial electron micrographs.
Gate stack technology for nanoscale devices
Directory of Open Access Journals (Sweden)
Byoung Hun Lee
2006-06-01
Full Text Available Scaling of the gate stack has been a key to enhancing the performance of complementary metal-oxide-semiconductor (CMOS field-effect transistors (FETs of past technology generations. Because the rate of gate stack scaling has diminished in recent years, the motivation for alternative gate stacks or novel device structures has increased considerably. Intense research during the last decade has led to the development of high dielectric constant (k gate stacks that match the performance of conventional SiO2-based gate dielectrics. However, many challenges remain before alternative gate stacks can be introduced into mainstream technology. We review the current status of and challenges in gate stack research for planar CMOS devices and alternative device technologies to provide insights for future research.
Ultra-dark graphene stack metamaterials
Chugh, Sunny; Man, Mengren; Chen, Zhihong; Webb, Kevin J.
2015-02-01
We present a fabrication method to achieve a graphene stack metamaterial, a periodic array of unit cells composed of graphene and a thin insulating spacer, that allows accumulation of the strong absorption from individual graphene sheets and low reflectivity from the stack. The complex sheet conductivity of graphene from experimental data models the measured power transmitted as a function of wavelength and number of periods in the stack. Simulated results based on the extracted graphene complex sheet conductivity for thicker stacks suggest that the graphene stack reflectivity and the per-unit-length absorption can be controlled to exceed the performance of competing light absorbers. Furthermore, the electrical properties of graphene coupled with the stack absorption characteristics provide for applications in optoelectronic devices.
Demagnetizing effects in stacked rectangular prisms
DEFF Research Database (Denmark)
Christensen, Dennis; Nielsen, Kaspar Kirstein; Bahl, Christian Robert Haffenden;
2011-01-01
A numerical, magnetostatic model of the internal magnetic field of a rectangular prism is extended to the case of a stack of rectangular prisms. The model enables the calculation of the spatially resolved, three-dimensional internal field in such a stack given any magnetic state function, stack...... configuration, temperature distribution and applied magnetic field. In this paper the model is applied to the case of a stack of parallel, ferromagnetic rectangular prisms and the resulting internal field is found as a function of the orientation of the applied field, the number of prisms in the stack...... a direct impact on the design of, e.g., active magnetic regenerators made of stacked rectangular prisms in terms of optimizing the internal field....
T phase observations in global seismogram stacks
Buehler, J. S.; Shearer, P. M.
2015-08-01
The T phase, conversion of acoustic to seismic energy, is typically observed as a high-frequency wave train at hydrophones or coastal seismic stations. Here we show that the T phase can be observed in broadband waveform stacks of ˜5200 earthquakes recorded by the Global Seismic Network. To enhance the phase arrivals in stacks, we apply short-time window average over long-time window average filtering to individual traces before stacking. Although the T phase arrival is visible in stacks from seismograms filtered at 0.5-5 Hz, it appears much stronger at higher frequencies (2-8 Hz) and is further enhanced by only stacking seismograms from oceanic paths. Stacking only subsets of the data depending on continental path lengths on the receiver side shows that the T phase can be observed at stations up to 4∘ inland from the coast, and changes in the T phase arrival time correspond to reasonable crustal velocities.
Energy Technology Data Exchange (ETDEWEB)
Bendzulla, Anne
2010-12-22
The aim of the present project is to develop a stack design for a 5-kW HTPEFC system. First, the state of the art of potential materials and process designs will be discussed for each component. Then, using this as a basis, three potential stack designs with typical attributes will be developed and assessed in terms of practicality with the aid of a specially derived evaluation method. Two stack designs classified as promising will be discussed in detail, constructed and then characterized using short stack tests. Comparing the stack designs reveals that both designs are fundamentally suitable for application in a HT-PEFC system with on-board supply. However, some of the performance data differ significantly for the two stack designs. The preferred stack design for application in a HT-PEFC system is characterized by robust operating behaviour and reproducible high-level performance data. Moreover, in compact constructions (120 W/l at 60 W/kg), the stack design allows flexible cooling with thermal oil or air, which can be adapted to suit specific applications. Furthermore, a defined temperature gradient can be set during operation, allowing the CO tolerance to be increased by up to 10 mV. The short stack design developed within the scope of the present work therefore represents an ideal basis for developing a 5-kW HT-PEFC system. Topics for further research activities include improving the performance by reducing weight and/or volume, as well as optimizing the heat management. The results achieved within the framework of this work clearly show that HTPEFC stacks have the potential to play a decisive role in increasing efficiency in the future, particularly when combined with an on-board supply system. (orig.) [German] Ziel der vorliegenden Arbeit ist die Entwicklung eines Stackkonzeptes fuer ein 5 kW-HT-PEFC System. Dazu wird zunaechst fuer jede Komponente der Stand der Technik moeglicher Materialien und Prozesskonzepte diskutiert. Darauf aufbauend werden drei
A moving mesh unstaggered constrained transport scheme for magnetohydrodynamics
Mocz, Philip; Pakmor, Rüdiger; Springel, Volker; Vogelsberger, Mark; Marinacci, Federico; Hernquist, Lars
2016-11-01
We present a constrained transport (CT) algorithm for solving the 3D ideal magnetohydrodynamic (MHD) equations on a moving mesh, which maintains the divergence-free condition on the magnetic field to machine-precision. Our CT scheme uses an unstructured representation of the magnetic vector potential, making the numerical method simple and computationally efficient. The scheme is implemented in the moving mesh code AREPO. We demonstrate the performance of the approach with simulations of driven MHD turbulence, a magnetized disc galaxy, and a cosmological volume with primordial magnetic field. We compare the outcomes of these experiments to those obtained with a previously implemented Powell divergence-cleaning scheme. While CT and the Powell technique yield similar results in idealized test problems, some differences are seen in situations more representative of astrophysical flows. In the turbulence simulations, the Powell cleaning scheme artificially grows the mean magnetic field, while CT maintains this conserved quantity of ideal MHD. In the disc simulation, CT gives slower magnetic field growth rate and saturates to equipartition between the turbulent kinetic energy and magnetic energy, whereas Powell cleaning produces a dynamically dominant magnetic field. Such difference has been observed in adaptive-mesh refinement codes with CT and smoothed-particle hydrodynamics codes with divergence-cleaning. In the cosmological simulation, both approaches give similar magnetic amplification, but Powell exhibits more cell-level noise. CT methods in general are more accurate than divergence-cleaning techniques, and, when coupled to a moving mesh can exploit the advantages of automatic spatial/temporal adaptivity and reduced advection errors, allowing for improved astrophysical MHD simulations.
A Time-predictable Stack Cache
DEFF Research Database (Denmark)
Abbaspourseyedi, Sahar; Brandner, Florian; Schoeberl, Martin
2013-01-01
precise results of the cache analysis part of the WCET analysis. Splitting the data cache for different data areas enables composable data cache analysis. The WCET analysis tool can analyze the accesses to these different data areas independently. In this paper we present the design and implementation...... of a cache for stack allocated data. Our port of the LLVM C++ compiler supports the management of the stack cache. The combination of stack cache instructions and the hardware implementation of the stack cache is a further step towards timepredictable architectures....
Stacking technology for a space constrained microsystem
DEFF Research Database (Denmark)
Heschel, Matthias; Kuhmann, Jochen Friedrich; Bouwstra, Siebe
1998-01-01
In this paper we present a stacking technology for an integrated packaging of an intelligent transducer which is formed by a micromachined silicon transducer and an integrated circuit chip. Transducer and circuitry are stacked on top of each other with an intermediate chip in between. The bonding...... of the transducer and the intermediate chip is done by flip chip solder bump bonding. The bonding between the above two-layer stack and the circuit chip is done by conductive adhesive bonding combined with gold studs. We demonstrate the stacking technologies on passive test chips rather than real devices and report...... on technological details...
Directory of Open Access Journals (Sweden)
Álvaro López García
2016-01-01
Full Text Available In this document we present an implementation of the Open Grid Forum’s Open Cloud Computing Interface (OCCI for OpenStack, namely ooi (Openstack occi interface, 2015 [1]. OCCI is an open standard for management tasks over cloud resources, focused on interoperability, portability and integration. ooi aims to implement this open interface for the OpenStack cloud middleware, promoting interoperability with other OCCI-enabled cloud management frameworks and infrastructures. ooi focuses on being non-invasive with a vanilla OpenStack installation, not tied to a particular OpenStack release version.
López García, Álvaro; Fernández del Castillo, Enol; Orviz Fernández, Pablo
In this document we present an implementation of the Open Grid Forum's Open Cloud Computing Interface (OCCI) for OpenStack, namely ooi (Openstack occi interface, 2015) [1]. OCCI is an open standard for management tasks over cloud resources, focused on interoperability, portability and integration. ooi aims to implement this open interface for the OpenStack cloud middleware, promoting interoperability with other OCCI-enabled cloud management frameworks and infrastructures. ooi focuses on being non-invasive with a vanilla OpenStack installation, not tied to a particular OpenStack release version.
Ball Bearing Stacking Automation System
Directory of Open Access Journals (Sweden)
Shafeequerrahman S . Ahmed
2013-01-01
Full Text Available This document is an effort to introduce the concept of automation in small scale industries and or small workshops that are involved in the manufacturing of small objects such as nuts, bolts and ball bearing in this case. This an electromechanical system which includes certain mechanical parts that involves one base stand on which one vertical metallic frame is mounted and hinged to this vertical stand is an in humanized effort seems inadequate in this era making necessary the use of Electronics, Computer in the manufacturing processes leading to the concept of Automated Manufacturing System (AMS.The ball bearing stack automation is an effort in this regard. In our project we go for stack automation for any object for example a ball bearing, be that is still a manual system there. It will be microcontroller based project control system equipped with microcontroller 89C51 from any manufacturer like Atmel or Philips. This could have been easily implemented if a PLC could be used for manufacturing the staking unit but I adopted the microcontroller based system so that some more modification in the system can be effected at will as to use the same hardware .Although a very small object i.e. ball bearig or small nut and fixture will be tried to be stacked, the system with more precision and more power handling capacity could be built for various requirements of the industry. For increasing more control capacity, we can use another module of this series. When the bearing is ready, it will be sent for packing. This is sensed by an inductive sensor. The output will be proceeds by PLC and microcontroller card which will be driving the assembly in order to put it into pads or flaps. This project will also count the total number of bearings to be packed and will display it on a LCD for real time reference and a provision is made using a higher level language using hyper terminal of the computer
Fluid flow and heat transfer investigation of pebble bed reactors using mesh-adaptive LES
Energy Technology Data Exchange (ETDEWEB)
Pavlidis, Dimitrios; Lathouwers, Danny, E-mail: d.lathouwers@tudelft.nl
2013-11-15
The very high temperature reactor is one of the designs currently being considered for nuclear power generation. One its variants is the pebble bed reactor in which the coolant passes through complex geometries (pores) at high Reynolds numbers. A computational fluid dynamics model with anisotropic mesh adaptivity is used to investigate coolant flow and heat transfer in such reactors. A novel method for implicitly incorporating solid boundaries based on multi-fluid flow modelling is adopted. The resulting model is able to resolve and simulate flow and heat transfer in randomly packed beds, regardless of the actual geometry, starting off with arbitrarily coarse meshes. The model is initially evaluated using an orderly stacked square channel of channel-height-to-particle diameter ratio of unity for a range of Reynolds numbers. The model is then applied to the face-centred cubical geometry. coolant flow and heat transfer patterns are investigated.
Quadratically consistent projection from particles to mesh
Duque, Daniel
2016-01-01
The advantage of particle Lagrangian methods in computational fluid dynamics is that advection is accurately modeled. However, this complicates the calculation of space derivatives. If a mesh is employed, it must be updated at each time step. On the other hand, fixed mesh, Eulerian, formulations benefit from the mesh being defined at the beginning of the simulation, but feature non-linear advection terms. It therefore seems natural to combine the two approaches, using a fixed mesh to perform calculations related to space derivatives, and using the particles to advect the information with time. The idea of combining Lagrangian particles and a fixed mesh goes back to Particle-in-Cell methods, and is here considered within the context of the finite element method (FEM) for the fixed mesh, and the particle FEM (pFEM) for the particles. Our results, in agreement with recent works, show that interpolation ("projection") errors, especially from particles to mesh, are the culprits of slow convergence of the method if...
3D-2D Deformable Image Registration Using Feature-Based Nonuniform Meshes.
Zhong, Zichun; Guo, Xiaohu; Cai, Yiqi; Yang, Yin; Wang, Jing; Jia, Xun; Mao, Weihua
2016-01-01
By using prior information of planning CT images and feature-based nonuniform meshes, this paper demonstrates that volumetric images can be efficiently registered with a very small portion of 2D projection images of a Cone-Beam Computed Tomography (CBCT) scan. After a density field is computed based on the extracted feature edges from planning CT images, nonuniform tetrahedral meshes will be automatically generated to better characterize the image features according to the density field; that is, finer meshes are generated for features. The displacement vector fields (DVFs) are specified at the mesh vertices to drive the deformation of original CT images. Digitally reconstructed radiographs (DRRs) of the deformed anatomy are generated and compared with corresponding 2D projections. DVFs are optimized to minimize the objective function including differences between DRRs and projections and the regularity. To further accelerate the above 3D-2D registration, a procedure to obtain good initial deformations by deforming the volume surface to match 2D body boundary on projections has been developed. This complete method is evaluated quantitatively by using several digital phantoms and data from head and neck cancer patients. The feature-based nonuniform meshing method leads to better results than either uniform orthogonal grid or uniform tetrahedral meshes.
3D-2D Deformable Image Registration Using Feature-Based Nonuniform Meshes
Directory of Open Access Journals (Sweden)
Zichun Zhong
2016-01-01
Full Text Available By using prior information of planning CT images and feature-based nonuniform meshes, this paper demonstrates that volumetric images can be efficiently registered with a very small portion of 2D projection images of a Cone-Beam Computed Tomography (CBCT scan. After a density field is computed based on the extracted feature edges from planning CT images, nonuniform tetrahedral meshes will be automatically generated to better characterize the image features according to the density field; that is, finer meshes are generated for features. The displacement vector fields (DVFs are specified at the mesh vertices to drive the deformation of original CT images. Digitally reconstructed radiographs (DRRs of the deformed anatomy are generated and compared with corresponding 2D projections. DVFs are optimized to minimize the objective function including differences between DRRs and projections and the regularity. To further accelerate the above 3D-2D registration, a procedure to obtain good initial deformations by deforming the volume surface to match 2D body boundary on projections has been developed. This complete method is evaluated quantitatively by using several digital phantoms and data from head and neck cancer patients. The feature-based nonuniform meshing method leads to better results than either uniform orthogonal grid or uniform tetrahedral meshes.
Multi-Dimensional, Compressible Viscous Flow on a Moving Voronoi Mesh
Muñoz, Diego; Marcus, Robert; Vogelsberger, Mark; Hernquist, Lars
2012-01-01
Numerous formulations of finite volume schemes for the Euler and Navier-Stokes equations exist, but in the majority of cases they have been developed for structured and stationary meshes. In many applications, more flexible mesh geometries that can dynamically adjust to the problem at hand and move with the flow in a (quasi) Lagrangian fashion would, however, be highly desirable, as this can allow a significant reduction of advection errors and an accurate realization of curved and moving boundary conditions. Here we describe a novel formulation of viscous continuum hydrodynamics that solves the equations of motion on a Voronoi mesh created by a set of mesh-generating points. The points can move in an arbitrary manner, but the most natural motion is that given by the fluid velocity itself, such that the mesh dynamically adjusts to the flow. Owing to the mathematical properties of the Voronoi tessellation, pathological mesh-twisting effects are avoided. Our implementation considers the full Navier-Stokes equat...
1974-01-01
Stacks of SPS Dipole Magnets ready for installation in the tunnel. The SPS uses a separated function lattice with dipoles for bending and quadrupoles for focusing. The 6.2 m long normal conducting dipoles are of H-type with coils that are bent-up at the ends. There are two types, B1 (total of 360) and B2 (384). Both are for a maximum field of 1.8 Tesla and have the same outer dimensions (450x800 mm2 vxh) but with different gaps (B1: 39x129 mm2, B2: 52x92 mm2) tailored to the beam size. The yoke, made of 1.5 mm thick laminations, consists of an upper and a lower half joined together in the median plane once the coils have been inserted.
Directory of Open Access Journals (Sweden)
Jana Menegassi del Favero
2015-06-01
Full Text Available Abstract Studies of ichthyoplankton retention by nets of different mesh sizes are important because they help in choosing a sampler when planning collection and the establishment of correction factors. These factors make it possible to compare studies performed with nets of different mesh sizes. In most studies of mesh retention of fish eggs, the taxonomic identification is done at the family level, resulting in the loss of detailed information. We separated Engraulidae eggs, obtained with 0.333 mm and 0.505 mm mesh bongo nets at 172 oceanographic stations in the southeastern Brazilian Bight, into four groups based on their morphometric characteristics. The difference in the abundance of eggs caught by the two nets was not significant for those groups with highest volume, types A and B, but in type C (Engraulis anchoita, the most eccentric, and in type D, of the smallest volume, the difference was significant. However, no significant difference was observed in the egg size sampled with each net for E. anchoita and type D, which exhibited higher abundance in the 0.333 mm mesh net and minor axis varying from 0.45-0.71 mm, smaller than the 0.505 mm mesh aperture and the mesh diagonal.
H(curl) Auxiliary Mesh Preconditioning
Energy Technology Data Exchange (ETDEWEB)
Kolev, T V; Pasciak, J E; Vassilevski, P S
2006-08-31
This paper analyzes a two-level preconditioning scheme for H(curl) bilinear forms. The scheme utilizes an auxiliary problem on a related mesh that is more amenable for constructing optimal order multigrid methods. More specifically, we analyze the case when the auxiliary mesh only approximately covers the original domain. The latter assumption is important since it allows for easy construction of nested multilevel spaces on regular auxiliary meshes. Numerical experiments in both two and three space dimensions illustrate the optimal performance of the method.
Engagement of Metal Debris into Gear Mesh
handschuh, Robert F.; Krantz, Timothy L.
2010-01-01
A series of bench-top experiments was conducted to determine the effects of metallic debris being dragged through meshing gear teeth. A test rig that is typically used to conduct contact fatigue experiments was used for these tests. Several sizes of drill material, shim stock and pieces of gear teeth were introduced and then driven through the meshing region. The level of torque required to drive the "chip" through the gear mesh was measured. From the data gathered, chip size sufficient to jam the mechanism can be determined.
Application of mesh network radios to UGS
Calcutt, Wade; Jones, Barry; Roeder, Brent
2008-04-01
During the past five years McQ has been actively pursuing integrating and applying wireless mesh network radios as a communications solution for unattended ground sensor (UGS) systems. This effort has been rewarded with limited levels of success and has ultimately resulted in a corporate position regarding the use of mesh network radios for UGS systems. A discussion into the background of the effort, the challenges of implementing commercial off-the-shelf (COTS) mesh radios with UGSs, the tradeoffs involved, and an overview of the future direction is presented.
Mesh Optimization for Ground Vehicle Aerodynamics
Adrian Gaylard; Essam F Abo-Serie; Nor Elyana Ahmad
2010-01-01
Mesh optimization strategy for estimating accurate drag of a ground vehicle is proposed based on examining the effect of different mesh parameters. The optimized mesh parameters were selected using design of experiment (DOE) method to be able to work in a...
Rigidity Constraints for Large Mesh Deformation
Institute of Scientific and Technical Information of China (English)
Yong Zhao; Xin-Guo Liu; Qun-Sheng Peng; Hu-Jun Bao
2009-01-01
It is a challenging problem of surface-based deformation to avoid apparent volumetric distortions around largely deformed areas. In this paper, we propose a new rigidity constraint for gradient domain mesh deformation to address this problem. Intuitively the proposed constraint can be regarded as several small cubes defined by the mesh vertices through mean value coordinates. The user interactively specifies the cubes in the regions which are prone to volumetric distortions, and the rigidity constraints could make the mesh behave like a solid object during deformation. The experimental results demonstrate that our constraint is intuitive, easy to use and very effective.
SURFACE MESH PARAMETERIZATION WITH NATURAL BOUNDARY
Institute of Scientific and Technical Information of China (English)
Ye Ming; Zhu Xiaofeng; Wang Chengtao
2003-01-01
Using the projected curve of surface mesh boundary as parameter domain border, linear mapping parameterization with natural boundary is realized. A fast algorithm for least squares fitting plane of vertices in the mesh boundary is proposed. After the mesh boundary is projected onto the fitting plane, low-pass filtering is adopted to eliminate crossovers, sharp corners and cavities in the projected curve and convert it into an eligible convex parameter domain boundary. In order to facilitate quantitative evaluations of parameterization schemes, three distortion-measuring formulae are presented.
Miyawaki, Shinjiro; Tawhai, Merryn H.; Hoffman, Eric A.; Lin, Ching-Long
2014-11-01
The authors have developed a method to automatically generate non-uniform CFD mesh for image-based human airway models. The sizes of generated tetrahedral elements vary in both radial and longitudinal directions to account for boundary layer and multiscale nature of pulmonary airflow. The proposed method takes advantage of our previously developed centerline-based geometry reconstruction method. In order to generate the mesh branch by branch in parallel, we used the open-source programs Gmsh and TetGen for surface and volume meshes, respectively. Both programs can specify element sizes by means of background mesh. The size of an arbitrary element in the domain is a function of wall distance, element size on the wall, and element size at the center of airway lumen. The element sizes on the wall are computed based on local flow rate and airway diameter. The total number of elements in the non-uniform mesh (10 M) was about half of that in the uniform mesh, although the computational time for the non-uniform mesh was about twice longer (170 min). The proposed method generates CFD meshes with fine elements near the wall and smooth variation of element size in longitudinal direction, which are required, e.g., for simulations with high flow rate. NIH Grants R01-HL094315, U01-HL114494, and S10-RR022421. Computer time provided by XSEDE.
Atlas-Based Automatic Generation of Subject-Specific Finite Element Tongue Meshes.
Bijar, Ahmad; Rohan, Pierre-Yves; Perrier, Pascal; Payan, Yohan
2016-01-01
Generation of subject-specific 3D finite element (FE) models requires the processing of numerous medical images in order to precisely extract geometrical information about subject-specific anatomy. This processing remains extremely challenging. To overcome this difficulty, we present an automatic atlas-based method that generates subject-specific FE meshes via a 3D registration guided by Magnetic Resonance images. The method extracts a 3D transformation by registering the atlas' volume image to the subject's one, and establishes a one-to-one correspondence between the two volumes. The 3D transformation field deforms the atlas' mesh to generate the subject-specific FE mesh. To preserve the quality of the subject-specific mesh, a diffeomorphic non-rigid registration based on B-spline free-form deformations is used, which guarantees a non-folding and one-to-one transformation. Two evaluations of the method are provided. First, a publicly available CT-database is used to assess the capability to accurately capture the complexity of each subject-specific Lung's geometry. Second, FE tongue meshes are generated for two healthy volunteers and two patients suffering from tongue cancer using MR images. It is shown that the method generates an appropriate representation of the subject-specific geometry while preserving the quality of the FE meshes for subsequent FE analysis. To demonstrate the importance of our method in a clinical context, a subject-specific mesh is used to simulate tongue's biomechanical response to the activation of an important tongue muscle, before and after cancer surgery.
Modeling of a stacked-screen regenerator in an oscillatory flow
Hsu, Shu Han; Biwa, Tetsushi
2017-01-01
In this paper, we model tortuous flow channels of a stacked-screen regenerator as a bundle of cylindrical tubes to analyze and design thermoacoustic Stirling engines. The oscillatory flow resistance of stacked-screen regenerators is measured and compared with those obtained using empirical equations to verify the applicability of those empirical equations to oscillating flows of pressurized Ar and He gases. It is then converted to an effective radius parameterized by Re h and r 0/δν, where Re h represents the Reynolds number based on velocity oscillation amplitude, r 0 is Ueda’s effective radius ( = \\sqrt{d\\text{h}D} /2, where d h is the hydraulic diameter and D is the mesh wire diameter), and δν denotes the viscous penetration depth. The applicability of the proposed effective radius is demonstrated experimentally when the axial temperature gradient is imposed on the regenerator.
Vector Fields and Flows on Differentiable Stacks
DEFF Research Database (Denmark)
A. Hepworth, Richard
2009-01-01
This paper introduces the notions of vector field and flow on a general differentiable stack. Our main theorem states that the flow of a vector field on a compact proper differentiable stack exists and is unique up to a uniquely determined 2-cell. This extends the usual result on the existence...... of vector fields....
40 CFR 61.44 - Stack sampling.
2010-07-01
... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Stack sampling. 61.44 Section 61.44 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL... Firing § 61.44 Stack sampling. (a) Sources subject to § 61.42(b) shall be continuously sampled,...
Learning OpenStack networking (Neutron)
Denton, James
2014-01-01
If you are an OpenStack-based cloud operator with experience in OpenStack Compute and nova-network but are new to Neutron networking, then this book is for you. Some networking experience is recommended, and a physical network infrastructure is required to provide connectivity to instances and other network resources configured in the book.
Efficient computation of clipped Voronoi diagram for mesh generation
Yan, Dongming
2013-04-01
The Voronoi diagram is a fundamental geometric structure widely used in various fields, especially in computer graphics and geometry computing. For a set of points in a compact domain (i.e. a bounded and closed 2D region or a 3D volume), some Voronoi cells of their Voronoi diagram are infinite or partially outside of the domain, but in practice only the parts of the cells inside the domain are needed, as when computing the centroidal Voronoi tessellation. Such a Voronoi diagram confined to a compact domain is called a clipped Voronoi diagram. We present an efficient algorithm to compute the clipped Voronoi diagram for a set of sites with respect to a compact 2D region or a 3D volume. We also apply the proposed method to optimal mesh generation based on the centroidal Voronoi tessellation. Crown Copyright © 2011 Published by Elsevier Ltd. All rights reserved.
Shape space exploration of constrained meshes
Yang, Yongliang
2011-01-01
We present a general computational framework to locally characterize any shape space of meshes implicitly prescribed by a collection of non-linear constraints. We computationally access such manifolds, typically of high dimension and co-dimension, through first and second order approximants, namely tangent spaces and quadratically parameterized osculant surfaces. Exploration and navigation of desirable subspaces of the shape space with regard to application specific quality measures are enabled using approximants that are intrinsic to the underlying manifold and directly computable in the parameter space of the osculant surface. We demonstrate our framework on shape spaces of planar quad (PQ) meshes, where each mesh face is constrained to be (nearly) planar, and circular meshes, where each face has a circumcircle. We evaluate our framework for navigation and design exploration on a variety of inputs, while keeping context specific properties such as fairness, proximity to a reference surface, etc.
LR: Compact connectivity representation for triangle meshes
Energy Technology Data Exchange (ETDEWEB)
Gurung, T; Luffel, M; Lindstrom, P; Rossignac, J
2011-01-28
We propose LR (Laced Ring) - a simple data structure for representing the connectivity of manifold triangle meshes. LR provides the option to store on average either 1.08 references per triangle or 26.2 bits per triangle. Its construction, from an input mesh that supports constant-time adjacency queries, has linear space and time complexity, and involves ordering most vertices along a nearly-Hamiltonian cycle. LR is best suited for applications that process meshes with fixed connectivity, as any changes to the connectivity require the data structure to be rebuilt. We provide an implementation of the set of standard random-access, constant-time operators for traversing a mesh, and show that LR often saves both space and traversal time over competing representations.
Shape space exploration of constrained meshes
Yang, Yongliang
2011-12-12
We present a general computational framework to locally characterize any shape space of meshes implicitly prescribed by a collection of non-linear constraints. We computationally access such manifolds, typically of high dimension and co-dimension, through first and second order approximants, namely tangent spaces and quadratically parameterized osculant surfaces. Exploration and navigation of desirable subspaces of the shape space with regard to application specific quality measures are enabled using approximants that are intrinsic to the underlying manifold and directly computable in the parameter space of the osculant surface. We demonstrate our framework on shape spaces of planar quad (PQ) meshes, where each mesh face is constrained to be (nearly) planar, and circular meshes, where each face has a circumcircle. We evaluate our framework for navigation and design exploration on a variety of inputs, while keeping context specific properties such as fairness, proximity to a reference surface, etc. © 2011 ACM.
Spacetime Meshing for Discontinuous Galerkin Methods
Thite, Shripad Vidyadhar
2008-01-01
Spacetime discontinuous Galerkin (SDG) finite element methods are used to solve such PDEs involving space and time variables arising from wave propagation phenomena in important applications in science and engineering. To support an accurate and efficient solution procedure using SDG methods and to exploit the flexibility of these methods, we give a meshing algorithm to construct an unstructured simplicial spacetime mesh over an arbitrary simplicial space domain. Our algorithm is the first spacetime meshing algorithm suitable for efficient solution of nonlinear phenomena in anisotropic media using novel discontinuous Galerkin finite element methods for implicit solutions directly in spacetime. Given a triangulated d-dimensional Euclidean space domain M (a simplicial complex) and initial conditions of the underlying hyperbolic spacetime PDE, we construct an unstructured simplicial mesh of the (d+1)-dimensional spacetime domain M x [0,infinity). Our algorithm uses a near-optimal number of spacetime elements, ea...
Metal Mesh Filters for Terahertz Receivers Project
National Aeronautics and Space Administration — The technical objective of this SBIR program is to develop and demonstrate metal mesh filters for use in NASA's low noise receivers for terahertz astronomy and...
Adaptive sampling for mesh spectrum editing
Institute of Scientific and Technical Information of China (English)
ZHAO Xiang-jun; ZHANG Hong-xin; BAO Hu-jun
2006-01-01
A mesh editing framework is presented in this paper, which integrates Free-Form Deformation (FFD) and geometry signal processing. By using simplified model from original mesh, the editing task can be accomplished with a few operations. We take the deformation of the proxy and the position coordinates of the mesh models as geometry signal. Wavelet analysis is employed to separate local detail information gracefully. The crucial innovation of this paper is a new adaptive regular sampling approach for our signal analysis based editing framework. In our approach, an original mesh is resampled and then refined iteratively which reflects optimization of our proposed spectrum preserving energy. As an extension of our spectrum editing scheme,the editing principle is applied to geometry details transferring, which brings satisfying results.
Mesh Processing in Medical Image Analysis
DEFF Research Database (Denmark)
The following topics are dealt with: mesh processing; medical image analysis; interactive freeform modeling; statistical shape analysis; clinical CT images; statistical surface recovery; automated segmentation; cerebral aneurysms; and real-time particle-based representation....
Obtuse triangle suppression in anisotropic meshes
Sun, Feng
2011-12-01
Anisotropic triangle meshes are used for efficient approximation of surfaces and flow data in finite element analysis, and in these applications it is desirable to have as few obtuse triangles as possible to reduce the discretization error. We present a variational approach to suppressing obtuse triangles in anisotropic meshes. Specifically, we introduce a hexagonal Minkowski metric, which is sensitive to triangle orientation, to give a new formulation of the centroidal Voronoi tessellation (CVT) method. Furthermore, we prove several relevant properties of the CVT method with the newly introduced metric. Experiments show that our algorithm produces anisotropic meshes with much fewer obtuse triangles than using existing methods while maintaining mesh anisotropy. © 2011 Elsevier B.V. All rights reserved.
A Time-predictable Stack Cache
DEFF Research Database (Denmark)
Abbaspour, Sahar; Brandner, Florian; Schoeberl, Martin
2013-01-01
Real-time systems need time-predictable architectures to support static worst-case execution time (WCET) analysis. One architectural feature, the data cache, is hard to analyze when different data areas (e.g., heap allocated and stack allocated data) share the same cache. This sharing leads to less...... precise results of the cache analysis part of the WCET analysis. Splitting the data cache for different data areas enables composable data cache analysis. The WCET analysis tool can analyze the accesses to these different data areas independently. In this paper we present the design and implementation...... of a cache for stack allocated data. Our port of the LLVM C++ compiler supports the management of the stack cache. The combination of stack cache instructions and the hardware implementation of the stack cache is a further step towards timepredictable architectures....
Status of MCFC stack technology at IHI
Energy Technology Data Exchange (ETDEWEB)
Hosaka, M.; Morita, T.; Matsuyama, T.; Otsubo, M. [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan)
1996-12-31
The molten carbonate fuel cell (MCFC) is a promising option for highly efficient power generation possible to enlarge. IHI has been studying parallel flow MCFC stacks with internal manifolds that have a large electrode area of 1m{sup 2}. IHI will make two 250 kW stacks for MW plant, and has begun to make cell components for the plant. To improve the stability of stack, soft corrugated plate used in the separator has been developed, and a way of gathering current from stacks has been studied. The DC output potential of the plant being very high, the design of electric insulation will be very important. A 20 kW short stack test was conducted in 1995 FY to certificate some of the improvements and components of the MW plant. These activities are presented below.
Removal of line artifacts on mesh boundary in computer generated hologram by mesh phase matching.
Park, Jae-Hyeung; Yeom, Han-Ju; Kim, Hee-Jae; Zhang, HuiJun; Li, BoNi; Ji, Yeong-Min; Kim, Sang-Hoo
2015-03-23
Mesh-based computer generated hologram enables realistic and efficient representation of three-dimensional scene. However, the dark line artifacts on the boundary between neighboring meshes are frequently observed, degrading the quality of the reconstruction. In this paper, we propose a simple technique to remove the dark line artifacts by matching the phase on the boundary of neighboring meshes. The feasibility of the proposed method is confirmed by the numerical and optical reconstruction of the generated hologram.
MHD simulations on an unstructured mesh
Energy Technology Data Exchange (ETDEWEB)
Strauss, H.R. [New York Univ., NY (United States); Park, W.; Belova, E.; Fu, G.Y. [Princeton Univ., NJ (United States). Plasma Physics Lab.; Longcope, D.W. [Univ. of Montana, Missoula, MT (United States); Sugiyama, L.E. [Massachusetts Inst. of Tech., Cambridge, MA (United States)
1998-12-31
Two reasons for using an unstructured computational mesh are adaptivity, and alignment with arbitrarily shaped boundaries. Two codes which use finite element discretization on an unstructured mesh are described. FEM3D solves 2D and 3D RMHD using an adaptive grid. MH3D++, which incorporates methods of FEM3D into the MH3D generalized MHD code, can be used with shaped boundaries, which might be 3D.
Mesh Processing in Medical Image Analysis
DEFF Research Database (Denmark)
The following topics are dealt with: mesh processing; medical image analysis; interactive freeform modeling; statistical shape analysis; clinical CT images; statistical surface recovery; automated segmentation; cerebral aneurysms; and real-time particle-based representation.......The following topics are dealt with: mesh processing; medical image analysis; interactive freeform modeling; statistical shape analysis; clinical CT images; statistical surface recovery; automated segmentation; cerebral aneurysms; and real-time particle-based representation....
Vector field processing on triangle meshes
De Goes, Fernando; Desbrun, Mathieu; Tong, Yiying
2015-01-01
While scalar fields on surfaces have been staples of geometry processing, the use of tangent vector fields has steadily grown in geometry processing over the last two decades: they are crucial to encoding directions and sizing on surfaces as commonly required in tasks such as texture synthesis, non-photorealistic rendering, digital grooming, and meshing. There are, however, a variety of discrete representations of tangent vector fields on triangle meshes, and each approach offers different tr...
Stacking fault probability and stacking fault energy in CoNi alloys
Institute of Scientific and Technical Information of China (English)
周伟敏; 江伯鸿; 刘岩; 漆王睿
2001-01-01
The stacking fault probability of CoNi alloys with different contents of Ni was measured by X-ray diffraction methods. The results show that the stacking fault decreases with increasing Ni content and with increasing temperature. The thermodynamical calculation has found an equation that can express the stacking fault energy γ of CoNi at temperature T. The phase equilibrium temperature depends on the composition of the certain alloy. The relationship between stacking fault energy γ and stacking fault probability Psf is determined.
Unstructured Mesh Movement and Viscous Mesh Generation for CFD-Based Design Optimization Project
National Aeronautics and Space Administration — The innovations proposed are twofold: 1) a robust unstructured mesh movement method able to handle isotropic (Euler), anisotropic (viscous), mixed element (hybrid)...
Mesh geometry impact on Micromegas performance with an Exchangeable Mesh prototype
Energy Technology Data Exchange (ETDEWEB)
Kuger, F., E-mail: fabian.kuger@cern.ch [CERN, Geneva (Switzerland); Julius-Maximilians-Universität, Würzburg (Germany); Bianco, M.; Iengo, P. [CERN, Geneva (Switzerland); Sekhniaidze, G. [CERN, Geneva (Switzerland); Universita e INFN, Napoli (Italy); Veenhof, R. [Uludağ University, Bursa (Turkey); Wotschack, J. [CERN, Geneva (Switzerland)
2016-07-11
The reconstruction precision of gaseous detectors is limited by losses of primary electrons during signal formation. In addition to common gas related losses, like attachment, Micromegas suffer from electron absorption during its transition through the micro mesh. This study aims for a deepened understanding of electron losses and their dependency on the mesh geometry. It combines experimental results obtained with a novel designed Exchangeable Mesh Micromegas (ExMe) and advanced microscopic-tracking simulations (ANSYS and Garfield++) of electron drift and mesh transition.
Robust moving mesh algorithms for hybrid stretched meshes: Application to moving boundaries problems
Landry, Jonathan; Soulaïmani, Azzeddine; Luke, Edward; Ben Haj Ali, Amine
2016-12-01
A robust Mesh-Mover Algorithm (MMA) approach is designed to adapt meshes of moving boundaries problems. A new methodology is developed from the best combination of well-known algorithms in order to preserve the quality of initial meshes. In most situations, MMAs distribute mesh deformation while preserving a good mesh quality. However, invalid meshes are generated when the motion is complex and/or involves multiple bodies. After studying a few MMA limitations, we propose the following approach: use the Inverse Distance Weighting (IDW) function to produce the displacement field, then apply the Geometric Element Transformation Method (GETMe) smoothing algorithms to improve the resulting mesh quality, and use an untangler to revert negative elements. The proposed approach has been proven efficient to adapt meshes for various realistic aerodynamic motions: a symmetric wing that has suffered large tip bending and twisting and the high-lift components of a swept wing that has moved to different flight stages. Finally, the fluid flow problem has been solved on meshes that have moved and they have produced results close to experimental ones. However, for situations where moving boundaries are too close to each other, more improvements need to be made or other approaches should be taken, such as an overset grid method.
Denner, Fabian; van Wachem, Berend G. M.
2015-10-01
Total variation diminishing (TVD) schemes are a widely applied group of monotonicity-preserving advection differencing schemes for partial differential equations in numerical heat transfer and computational fluid dynamics. These schemes are typically designed for one-dimensional problems or multidimensional problems on structured equidistant quadrilateral meshes. Practical applications, however, often involve complex geometries that cannot be represented by Cartesian meshes and, therefore, necessitate the application of unstructured meshes, which require a more sophisticated discretisation to account for their additional topological complexity. In principle, TVD schemes are applicable to unstructured meshes, however, not all the data required for TVD differencing is readily available on unstructured meshes, and the solution suffers from considerable numerical diffusion as a result of mesh skewness. In this article we analyse TVD differencing on unstructured three-dimensional meshes, focusing on the non-linearity of TVD differencing and the extrapolation of the virtual upwind node. Furthermore, we propose a novel monotonicity-preserving correction method for TVD schemes that significantly reduces numerical diffusion caused by mesh skewness. The presented numerical experiments demonstrate the importance of accounting for the non-linearity introduced by TVD differencing and of imposing carefully chosen limits on the extrapolated virtual upwind node, as well as the efficacy of the proposed method to correct mesh skewness.
Discrete differential geometry: the nonplanar quadrilateral mesh.
Twining, Carole J; Marsland, Stephen
2012-06-01
We consider the problem of constructing a discrete differential geometry defined on nonplanar quadrilateral meshes. Physical models on discrete nonflat spaces are of inherent interest, as well as being used in applications such as computation for electromagnetism, fluid mechanics, and image analysis. However, the majority of analysis has focused on triangulated meshes. We consider two approaches: discretizing the tensor calculus, and a discrete mesh version of differential forms. While these two approaches are equivalent in the continuum, we show that this is not true in the discrete case. Nevertheless, we show that it is possible to construct mesh versions of the Levi-Civita connection (and hence the tensorial covariant derivative and the associated covariant exterior derivative), the torsion, and the curvature. We show how discrete analogs of the usual vector integral theorems are constructed in such a way that the appropriate conservation laws hold exactly on the mesh, rather than only as approximations to the continuum limit. We demonstrate the success of our method by constructing a mesh version of classical electromagnetism and discuss how our formalism could be used to deal with other physical models, such as fluids.
Hybrid Surface Mesh Adaptation for Climate Modeling
Institute of Scientific and Technical Information of China (English)
Ahmed Khamayseh; Valmor de Almeida; Glen Hansen
2008-01-01
Solution-driven mesh adaptation is becoming quite popular for spatial error control in the numerical simulation of complex computational physics applications, such as climate modeling. Typically, spatial adaptation is achieved by element subdivision (h adaptation) with a primary goal of resolving the local length scales of interest. A second, lesspopular method of spatial adaptivity is called "mesh motion" (r adaptation); the smooth repositioning of mesh node points aimed at resizing existing elements to capture the local length scales. This paper proposes an adaptation method based on a combination of both element subdivision and node point repositioning (rh adaptation). By combining these two methods using the notion of a mobility function, the proposed approach seeks to increase the flexibility and extensibility of mesh motion algorithms while providing a somewhat smoother transition between refined regions than is pro-duced by element subdivision alone. Further, in an attempt to support the requirements of a very general class of climate simulation applications, the proposed method is de-signed to accommodate unstructured, polygonal mesh topologies in addition to the most popular mesh types.
Probing Temperature Inside Planar SOFC Short Stack, Modules, and Stack Series
Yu, Rong; Guan, Wanbing; Zhou, Xiao-Dong
2016-11-01
Probing temperature inside a solid oxide fuel cell (SOFC) stack lies at the heart of the development of high-performance and stable SOFC systems. In this article, we report our recent work on the direct measurements of the temperature in three types of SOFC systems: a 5-cell short stack, a 30-cell stack module, and a stack series consisting of two 30-cell stack modules. The dependence of temperature on the gas flow rate and current density was studied under a current sweep or steady-state operation. During the current sweep, the temperature inside the 5-cell stack decreased with increasing current, while it increased significantly at the bottom and top of the 30-cell stack. During a steady-state operation, the temperature of the 5-cell stack was stable while it was increased in the 30-cell stack. In the stack series, the maximum temperature gradient reached 190°C when the gas was not preheated. If the gas was preheated and the temperature gradient was reduced to 23°C in the stack series with the presence of a preheating gas and segmented temperature control, this resulted in a low degradation rate.
Szmelter, J.; Marchant, M. J.; Evans, A.; Weatherill, N. P.
A cell vertex finite volume Jameson scheme is used to solve the 2D compressible, laminar, viscous fluid flow equations on locally embedded multiblock meshes. The proposed algorithm is applicable to both the Euler and Navier-Stokes equations. It is concluded that the adaptivity method is very successful in efficiently improving the accuracy of the solution. Both the mesh generator and the flow equation solver which are based on a quadtree data structure offer good flexibility in the treatment of interfaces. It is concluded that methods under consideration lead to accurate flow solutions.
Fire performance of basalt FRP mesh reinforced HPC thin plates
DEFF Research Database (Denmark)
Hulin, Thomas; Hodicky, Kamil; Schmidt, Jacob Wittrup;
2013-01-01
An experimental program was carried out to investigate the influence of basalt FRP (BFRP) reinforcing mesh on the fire behaviour of thin high performance concrete (HPC) plates applied to sandwich elements. Samples with BFRP mesh were compared to samples with no mesh, samples with steel mesh...
Memory Stacking in Hierarchical Networks.
Westö, Johan; May, Patrick J C; Tiitinen, Hannu
2016-02-01
Robust representations of sounds with a complex spectrotemporal structure are thought to emerge in hierarchically organized auditory cortex, but the computational advantage of this hierarchy remains unknown. Here, we used computational models to study how such hierarchical structures affect temporal binding in neural networks. We equipped individual units in different types of feedforward networks with local memory mechanisms storing recent inputs and observed how this affected the ability of the networks to process stimuli context dependently. Our findings illustrate that these local memories stack up in hierarchical structures and hence allow network units to exhibit selectivity to spectral sequences longer than the time spans of the local memories. We also illustrate that short-term synaptic plasticity is a potential local memory mechanism within the auditory cortex, and we show that it can bring robustness to context dependence against variation in the temporal rate of stimuli, while introducing nonlinearities to response profiles that are not well captured by standard linear spectrotemporal receptive field models. The results therefore indicate that short-term synaptic plasticity might provide hierarchically structured auditory cortex with computational capabilities important for robust representations of spectrotemporal patterns.
Cheat Lee, Wei; Fang, Yuanxing; Commandeur, Daniel; Qian, Rong; Al-Abdullah, Zainab T. Y.; Chen, Qiao
2017-09-01
An ultra rapid growth method for vertically aligned ZnO nanorod (NR) thin films on metal meshes was developed using a direct heating synthesis technique. A typical NR growth rate of 10 μm h-1 was achieved. The effects of the applied heating power and growth duration on the morphologies of ZnO nanostructures were examined. High density surface defects were formed on the ZnO NRs, which is responsible for slow charge recombination and high efficiency in the photoelectrochemical (PEC) water splitting process. The light absorption for a photoanode was significantly improved by light trapping using a 3D stacked metal mesh photoanode structure. With the internal reflection between the stacked photoanodes, the final light leakage is minimised. The light absorption in the stacked photoanode is improved without restricting the charge transportation. In comparison with a single mesh photoanode and a chemical bath deposition grown flat photoanode, the PEC water splitting efficiency from the stacked photoanode was increased by a factor of 2.6 and 6.1 respectively.
On flow maldistribution in PEMFC stacks
Energy Technology Data Exchange (ETDEWEB)
Wang, J. [Xi' an Jiaotong Univ., Xi' an (China). State Key Laboratory of Multiphase Flow in Power Engineering; Lund Univ., Lund (Sweden). Dept. of Energy Sciences, Heat Transfer Div.; Yan, J. [Xi' an Jiaotong Univ., Xi' an (China). State Key Laboratory of Multiphase Flow in Power Engineering; Yuan, J.; Sunden, B. [Lund Univ., Lund (Sweden). Dept. of Energy Sciences, Heat Transfer Div.
2010-07-01
Fuel cell devices have technical and environmental advantages over thermal power systems. The advantages include high performance characteristics, reliability, durability and low emissions. In order to increase the voltage in a single PEMFC for practical operations, many single cells are serially connected to fabricate a fuel cell stack. This study focused on the flow maldistribution at stack level. The flow maldistribution in unit cells may significantly influence the fuel cell stack performance, including the uniformity of current density and the voltage. Of the few studies on flow maldistribution in PEMFC stacks, the results are unsystematic, scattered, and even contradictory. As such, it is necessary to review and summarize previous studies to gain insight into methods to reduce the flow maldistribution in PEMFC stacks. This paper therefore reviewed existing literature concerning flow maldistributions in PEMFC stacks and discussed the effects of the arrangement of flow configurations, design parameters and operating conditions on the flow maldistribution. Some suggestions were outlined to reduce the flow maldistribution in PEMFC stacks. 34 refs., 1 tab., 13 figs.
Butterflies I: morphisms of 2-group stacks
Aldrovandi, Ettore
2008-01-01
Weak morphisms of non-abelian complexes of length 2, or crossed modules, are morphisms of the associated 2-group stacks, or gr-stacks. We present a full description of the weak morphisms in terms of diagrams we call butterflies. We give a complete description of the resulting bicategory of crossed modules, which we show is fibered and biequivalent to the 2-stack of 2-group stacks. As a consequence we obtain a complete characterization of the non-abelian derived category of complexes of length 2. Deligne's analogous theorem in the case of Picard stacks and abelian sheaves becomes an immediate corollary. Commutativity laws on 2-group stacks are also analyzed in terms of butterflies, yielding new characterizations of braided, symmetric, and Picard 2-group stacks. Furthermore, the description of a weak morphism in terms of the corresponding butterfly diagram allows us to obtain a long exact sequence in non-abelian cohomology, removing a preexisting fibration condition on the coefficients short exact sequence.
Density of oxidation-induced stacking faults in damaged silicon
Kuper, F.G.; Hosson, J.Th.M. De; Verwey, J.F.
1986-01-01
A model for the relation between density and length of oxidation-induced stacking faults on damaged silicon surfaces is proposed, based on interactions of stacking faults with dislocations and neighboring stacking faults. The model agrees with experiments.
Capping stack: An industry in the making
Institute of Scientific and Technical Information of China (English)
Jack Chen; Li Xunke; Xie Wenhui; Kang Yongtian
2013-01-01
This paper gives an overview of recent development of the marine well containment system (MWCS)after BP Macondo subsea well blowout occurred on April 20,2010 in the Gulf of Mexico.Capping stack,a hardware utilized to contain blowout well at or near the wellhead is the center piece of MWCS.Accessibility to the dedicated capping stacks is gradually becoming a pre-requirement to obtain the permit for offshore drilling/workover,and the industry for manufacturing,maintenance,transportation and operation of the capping stack is in the making.
Vector Fields and Flows on Differentiable Stacks
DEFF Research Database (Denmark)
A. Hepworth, Richard
2009-01-01
This paper introduces the notions of vector field and flow on a general differentiable stack. Our main theorem states that the flow of a vector field on a compact proper differentiable stack exists and is unique up to a uniquely determined 2-cell. This extends the usual result on the existence...... and uniqueness of flows on a manifold as well as the author's existing results for orbifolds. It sets the scene for a discussion of Morse Theory on a general proper stack and also paves the way for the categorification of other key aspects of differential geometry such as the tangent bundle and the Lie algebra...
Dynamical Stability of Slip-stacking Particles
Eldred, Jeffrey
2014-01-01
We study the stability of particles in slip-stacking configuration, used to nearly double proton beam intensity at Fermilab. We introduce universal area factors to calculate the available phase space area for any set of beam parameters without individual simulation. We find perturbative solutions for stable particle trajectories. We establish Booster beam quality requirements to achieve 97\\% slip-stacking efficiency. We show that slip-stacking dynamics directly correspond to the driven pendulum and to the system of two standing-wave traps moving with respect to each other.
Dynamical stability of slip-stacking particles
Energy Technology Data Exchange (ETDEWEB)
Eldred, Jeffrey; Zwaska, Robert
2014-09-01
We study the stability of particles in slip-stacking configuration, used to nearly double proton beam intensity at Fermilab. We introduce universal area factors to calculate the available phase space area for any set of beam parameters without individual simulation. We find perturbative solutions for stable particle trajectories. We establish Booster beam quality requirements to achieve 97% slip-stacking efficiency. We show that slip-stacking dynamics directly correspond to the driven pendulum and to the system of two standing-wave traps moving with respect to each other.
Dynamical Stability of Slip-stacking Particles
Energy Technology Data Exchange (ETDEWEB)
Eldred, Jeffrey [Fermilab; Zwaska, Robert [Fermilab
2014-09-04
We study the stability of particles in slip-stacking configuration, used to nearly double proton beam intensity at Fermilab. We introduce universal area factors to calculate the available phase space area for any set of beam parameters without individual simulation. We find perturbative solutions for stable particle trajectories. We establish Booster beam quality requirements to achieve 97% slip-stacking efficiency. We show that slip-stacking dynamics directly correspond to the driven pendulum and to the system of two standing-wave traps moving with respect to each other.
Jansen, Gunnar; Sohrabi, Reza; Miller, Stephen A.
2017-02-01
Short for Hexahedra from Unique Location in (K)convex Polyhedra - HULK is a simple and efficient algorithm to generate hexahedral meshes from generic STL files describing a geological model to be used in simulation tools based on the finite element, finite volume or finite difference methods. Using binary space partitioning of the input geometry and octree refinement on the grid, a successive increase in accuracy of the mesh is achieved. We present the theoretical basis as well as the implementation procedure with three geological models with varying complexity, providing the basis on which the algorithm is evaluated. HULK generates high accuracy discretizations with cell counts suitable for state-of-the-art subsurface simulators and provides a new method for hexahedral mesh generation in geological settings.
A nonhydrostatic unstructured-mesh soundproof model for simulation of internal gravity waves
Smolarkiewicz, Piotr; Szmelter, Joanna
2011-12-01
A semi-implicit edge-based unstructured-mesh model is developed that integrates nonhydrostatic soundproof equations, inclusive of anelastic and pseudo-incompressible systems of partial differential equations. The model builds on nonoscillatory forward-in-time MPDATA approach using finite-volume discretization and unstructured meshes with arbitrarily shaped cells. Implicit treatment of gravity waves benefits both accuracy and stability of the model. The unstructured-mesh solutions are compared to equivalent structured-grid results for intricate, multiscale internal-wave phenomenon of a non-Boussinesq amplification and breaking of deep stratospheric gravity waves. The departures of the anelastic and pseudoincompressible results are quantified in reference to a recent asymptotic theory [Achatz et al. 2010, J. Fluid Mech., 663, 120-147)].
Analysis and Improvement of a Scaled-Up and Stacked Microbial Fuel Cell
Dekker, A.J.G.; Heijne, ter A.; Saakes, M.; Hamelers, H.V.M.; Buisman, C.J.N.
2009-01-01
Scaling up microbial fuel cells (MFCs) is inevitable when power outputs have to be obtained that can power electrical devices other than small sensors. This research has used a bipolar plate MFC stack of four cells with a total working volume of 20 L and a total membrane surface area of 2 m2. The ca
Multiple Staggered Mesh Ewald: Boosting the Accuracy of the Smooth Particle Mesh Ewald Method
Wang, Han; Fang, Jun
2016-01-01
The smooth particle mesh Ewald (SPME) method is the standard method for computing the electrostatic interactions in the molecular simulations. In this work, the multiple staggered mesh Ewald (MSME) method is proposed to boost the accuracy of the SPME method. Unlike the SPME that achieves higher accuracy by refining the mesh, the MSME improves the accuracy by averaging the standard SPME forces computed on, e.g. $M$, staggered meshes. We prove, from theoretical perspective, that the MSME is as accurate as the SPME, but uses $M^2$ times less mesh points in a certain parameter range. In the complementary parameter range, the MSME is as accurate as the SPME with twice of the interpolation order. The theoretical conclusions are numerically validated both by a uniform and uncorrelated charge system, and by a three-point-charge water system that is widely used as solvent for the bio-macromolecules.
Medical Image Processing for Fully Integrated Subject Specific Whole Brain Mesh Generation
Directory of Open Access Journals (Sweden)
Chih-Yang Hsu
2015-05-01
Full Text Available Currently, anatomically consistent segmentation of vascular trees acquired with magnetic resonance imaging requires the use of multiple image processing steps, which, in turn, depend on manual intervention. In effect, segmentation of vascular trees from medical images is time consuming and error prone due to the tortuous geometry and weak signal in small blood vessels. To overcome errors and accelerate the image processing time, we introduce an automatic image processing pipeline for constructing subject specific computational meshes for entire cerebral vasculature, including segmentation of ancillary structures; the grey and white matter, cerebrospinal fluid space, skull, and scalp. To demonstrate the validity of the new pipeline, we segmented the entire intracranial compartment with special attention of the angioarchitecture from magnetic resonance imaging acquired for two healthy volunteers. The raw images were processed through our pipeline for automatic segmentation and mesh generation. Due to partial volume effect and finite resolution, the computational meshes intersect with each other at respective interfaces. To eliminate anatomically inconsistent overlap, we utilized morphological operations to separate the structures with a physiologically sound gap spaces. The resulting meshes exhibit anatomically correct spatial extent and relative positions without intersections. For validation, we computed critical biometrics of the angioarchitecture, the cortical surfaces, ventricular system, and cerebrospinal fluid (CSF spaces and compared against literature values. Volumina and surface areas of the computational mesh were found to be in physiological ranges. In conclusion, we present an automatic image processing pipeline to automate the segmentation of the main intracranial compartments including a subject-specific vascular trees. These computational meshes can be used in 3D immersive visualization for diagnosis, surgery planning with haptics
Karipineni, Farah; Joshi, Priya; Parsikia, Afshin; Dhir, Teena; Joshi, Amit R T
2016-03-01
Laparoscopic-assisted ventral hernia repair (LAVHR) with mesh is well established as the preferred technique for hernia repair. We sought to determine whether primary fascial closure and/or overlap of the mesh reduced recurrence and/or complications. We conducted a retrospective review on 57 LAVHR patients using polyester composite mesh between August 2010 and July 2013. They were divided into mesh-only (nonclosure) and primary fascial closure with mesh (closure) groups. Patient demographics, prior surgical history, mesh overlap, complications, and recurrence rates were compared. Thirty-nine (68%) of 57 patients were in the closure group and 18 (32%) in the nonclosure group. Mean defect sizes were 15.5 and 22.5 cm(2), respectively. Participants were followed for a mean of 1.3 years [standard deviation (SD) = 0.7]. Recurrence rates were 2/39 (5.1%) in the closure group and 1/18 (5.6%) in the nonclosure group (P = 0.947). There were no major postoperative complications in the nonclosure group. The closure group experienced four (10.3%) complications. This was not a statistically significant difference (P = 0.159). The median mesh-to-hernia ratio for all repairs was 15.2 (surface area) and 3.9 (diameter). Median length of stay was 14.5 hours (1.7-99.3) for patients with nonclosure and 11.9 hours (6.9-90.3 hours) for patients with closure (P = 0.625). In conclusion, this is one of the largest series of LAVHR exclusively using polyester dual-sided mesh. Our recurrence rate was about 5 per cent. Significant mesh overlap is needed to achieve such low recurrence rates. Primary closure of hernias seems less important than adequate mesh overlap in preventing recurrence after LAVHR.
Characterization of Piezoelectric Stacks for Space Applications
Sherrit, Stewart; Jones, Christopher; Aldrich, Jack; Blodget, Chad; Bao, Xiaoqi; Badescu, Mircea; Bar-Cohen, Yoseph
2008-01-01
Future NASA missions are increasingly seeking to actuate mechanisms to precision levels in the nanometer range and below. Co-fired multilayer piezoelectric stacks offer the required actuation precision that is needed for such mechanisms. To obtain performance statistics and determine reliability for extended use, sets of commercial PZT stacks were tested in various AC and DC conditions at both nominal and high temperatures and voltages. In order to study the lifetime performance of these stacks, five actuators were driven sinusoidally for up to ten billion cycles. An automated data acquisition system was developed and implemented to monitor each stack's electrical current and voltage waveforms over the life of the test. As part of the monitoring tests, the displacement, impedance, capacitance and leakage current were measured to assess the operation degradation. This paper presents some of the results of this effort.
The stack on software and sovereignty
Bratton, Benjamin H
2016-01-01
A comprehensive political and design theory of planetary-scale computation proposing that The Stack -- an accidental megastructure -- is both a technological apparatus and a model for a new geopolitical architecture.
Contemporary sample stacking in analytical electrophoresis.
Šlampová, Andrea; Malá, Zdena; Pantůčková, Pavla; Gebauer, Petr; Boček, Petr
2013-01-01
Sample stacking is a term denoting a multifarious class of methods and their names that are used daily in CE for online concentration of diluted samples to enhance separation efficiency and sensitivity of analyses. The essence of these methods is that analytes present at low concentrations in a large injected sample zone are concentrated into a short and sharp zone (stack) in the separation capillary. Then the stacked analytes are separated and detected. Regardless of the diversity of the stacking electromigration methods, one can distinguish four main principles that form the bases of nearly all of them: (i) Kohlrausch adjustment of concentrations, (ii) pH step, (iii) micellar methods, and (iv) transient ITP. This contribution is a continuation of our previous reviews on the topic and brings an overview of papers published during 2010-2012 and relevant to the mentioned principles (except the last one which is covered by another review in this issue).
Trew, Mark L; Smaill, Bruce H; Bullivant, David P; Hunter, Peter J; Pullan, Andrew J
2005-12-01
A generalized finite difference (GFD) method is presented that can be used to solve the bi-domain equations modeling cardiac electrical activity. Classical finite difference methods have been applied by many researchers to the bi-domain equations. However, these methods suffer from the limitation of requiring computational meshes that are structured and orthogonal. Finite element or finite volume methods enable the bi-domain equations to be solved on unstructured meshes, although implementations of such methods do not always cater for meshes with varying element topology. The GFD method solves the bi-domain equations on arbitrary and irregular computational meshes without any need to specify element basis functions. The method is useful as it can be easily applied to activation problems using existing meshes that have originally been created for use by finite element or finite difference methods. In addition, the GFD method employs an innovative approach to enforcing nodal and non-nodal boundary conditions. The GFD method performs effectively for a range of two and three-dimensional test problems and when computing bi-domain electrical activation moving through a fully anisotropic three-dimensional model of canine ventricles.
Greene, Patrick T.; Schofield, Samuel P.; Nourgaliev, Robert
2017-04-01
A new mesh smoothing method designed to cluster cells near a dynamically evolving interface is presented. The method is based on weighted condition number mesh relaxation with the weight function computed from a level set representation of the interface. The weight function is expressed as a Taylor series based discontinuous Galerkin projection, which makes the computation of the derivatives of the weight function needed during the condition number optimization process a trivial matter. For cases when a level set is not available, a fast method for generating a low-order level set from discrete cell-centered fields, such as a volume fraction or index function, is provided. Results show that the low-order level set works equally well as the actual level set for mesh smoothing. Meshes generated for a number of interface geometries are presented, including cases with multiple level sets. Dynamic cases with moving interfaces show the new method is capable of maintaining a desired resolution near the interface with an acceptable number of relaxation iterations per time step, which demonstrates the method's potential to be used as a mesh relaxer for arbitrary Lagrangian Eulerian (ALE) methods.
Energy Technology Data Exchange (ETDEWEB)
Duplex, B., E-mail: benjamin.duplex@gmail.fr [CEA, DEN, DANS/DM2S/STMF, Cadarache, F-13108 Saint-Paul-lez-Durance (France); Grandotto, M. [CEA, DEN, DANS/DM2S/STMF, Cadarache, F-13108 Saint-Paul-lez-Durance (France); Perdu, F. [CEA, DEN, DANS/DM2S/STMF, 17 rue des Martyrs, F-38054 Grenoble (France); Daniel, M.; Gesquiere, G. [Aix-Marseille University, CNRS, LSIS, UMR 7296, case postale 925, 163 Avenue de Luminy, F-13288 Marseille cedex 09 (France)
2012-12-15
Highlights: Black-Right-Pointing-Pointer A function of deformation transfer on meshes is proposed. Black-Right-Pointing-Pointer Large meshes sharing a common geometry or common borders are treated. Black-Right-Pointing-Pointer We show the deformation transfer impact on simulation results. - Abstract: The paper proposes a method to couple computation codes and focuses on the transfer of mesh deformations between these codes. The deformations can concern a single object or different objects in contact along common boundaries. The method is designed to allow a wide range of mesh types and to manage large volumes of data. To reach these objectives, a mesh simplification step is first achieved and is followed by the deformation characterisation through a continuous function defined by a network of compact support radial basis functions (RBFs). A test case featuring adjacent geometries in a material testing reactor (MTR) is presented to assess the method. Two solids close together are subject to a deformation by a thermal dilatation, and are cooled by a liquid flowing between them. The results demonstrate the effectiveness of the method and show how the deformation transfer modifies the thermalhydraulic solution.
Cosmic ray test of INO RPC stack
Energy Technology Data Exchange (ETDEWEB)
Bhuyan, M. [Department of High Energy Physics, Tata Institute of Fundamental Research, Mumbai 400005 (India); Datar, V.M. [Nuclear Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Kalmani, S.D.; Lahamge, S.M.; Mondal, N.K.; Nagaraj, P.; Pal, S.; Reddy, L.V.; Redij, A.; Samuel, D.; Saraf, M.N. [Department of High Energy Physics, Tata Institute of Fundamental Research, Mumbai 400005 (India); Satyanarayana, B., E-mail: bsn@tifr.res.in [Department of High Energy Physics, Tata Institute of Fundamental Research, Mumbai 400005 (India); Shinde, R.R.; Verma, P. [Department of High Energy Physics, Tata Institute of Fundamental Research, Mumbai 400005 (India)
2012-01-01
The India-based Neutrino Observatory (INO) collaboration is planning to build a 50 kt magnetised iron calorimeter (ICAL) detector using glass Resistive Plate Chambers (RPCs) as active detector elements. A stack of 12 such glass RPCs of 1 m Multiplication-Sign 1 m in area is tracking cosmic ray muons for over three years. In this paper, we will review the constructional aspects of the stack and discuss the performance of the RPCs using this cosmic ray data.
Stacking fault energy in some single crystals
Institute of Scientific and Technical Information of China (English)
Aditya M.Vora
2012-01-01
The stacking fault energy of single crystals has been reported using the peak shift method.Presently studied all single crystals are grown by using a direct vapor transport (DVT) technique in the laboratory.The structural characterizations of these crystals are made by XRD.Considerable variations are shown in deformation (α) and growth (β) probabilities in single crystals due to off-stoichiometry,which possesses the stacking fault in the single crystal.
Measuring Structural Parameters Through Stacking Galaxy Images
Li, Yubin; Zheng, Xian Zhong; Gu, Qiu-Sheng; Wang, Yi-Peng; Wen, Zhang Zheng; Guo, Kexin; An, Fang Xia
2016-12-01
It remains challenging to detect the low surface brightness structures of faint high-z galaxies, which are key to understanding the structural evolution of galaxies. The technique of image stacking allows us to measure the averaged light profile beneath the detection limit and probe the extended structure of a group of galaxies. We carry out simulations to examine the recovery of the averaged surface brightness profile through stacking model Hubble Space Telescope/Advanced Camera for Surveys images of a set of galaxies as functions of the Sérsic index (n), effective radius (R e) and axis ratio (AR). The Sérsic profile best fitting the radial profile of the stacked image is taken as the recovered profile, in comparison with the intrinsic mean profile of the model galaxies. Our results show that, in general, the structural parameters of the mean profile can be properly determined through stacking, though systematic biases need to be corrected when spreads of R e and AR are counted. We find that the Sérsic index is slightly overestimated and R e is underestimated at {AR}\\lt 0.5 because the stacked image appears to be more compact due to the presence of inclined galaxies; the spread of R e biases the stacked profile to have a higher Sérsic index. We stress that the measurements of structural parameters through stacking should take these biases into account. We estimate the biases in the recovered structural parameters from stacks of galaxies when the samples have distributions of {R}{{e}}, AR and n seen in local galaxies.
Stacking interactions in PUF-RNA complexes
Energy Technology Data Exchange (ETDEWEB)
Yiling Koh, Yvonne; Wang, Yeming; Qiu, Chen; Opperman, Laura; Gross, Leah; Tanaka Hall, Traci M; Wickens, Marvin [NIH; (UW)
2012-07-02
Stacking interactions between amino acids and bases are common in RNA-protein interactions. Many proteins that regulate mRNAs interact with single-stranded RNA elements in the 3' UTR (3'-untranslated region) of their targets. PUF proteins are exemplary. Here we focus on complexes formed between a Caenorhabditis elegans PUF protein, FBF, and its cognate RNAs. Stacking interactions are particularly prominent and involve every RNA base in the recognition element. To assess the contribution of stacking interactions to formation of the RNA-protein complex, we combine in vivo selection experiments with site-directed mutagenesis, biochemistry, and structural analysis. Our results reveal that the identities of stacking amino acids in FBF affect both the affinity and specificity of the RNA-protein interaction. Substitutions in amino acid side chains can restrict or broaden RNA specificity. We conclude that the identities of stacking residues are important in achieving the natural specificities of PUF proteins. Similarly, in PUF proteins engineered to bind new RNA sequences, the identity of stacking residues may contribute to 'target' versus 'off-target' interactions, and thus be an important consideration in the design of proteins with new specificities.
Connectivity editing for quad-dominant meshes
Peng, Chihan
2013-08-01
We propose a connectivity editing framework for quad-dominant meshes. In our framework, the user can edit the mesh connectivity to control the location, type, and number of irregular vertices (with more or fewer than four neighbors) and irregular faces (non-quads). We provide a theoretical analysis of the problem, discuss what edits are possible and impossible, and describe how to implement an editing framework that realizes all possible editing operations. In the results, we show example edits and illustrate the advantages and disadvantages of different strategies for quad-dominant mesh design. © 2013 The Author(s) Computer Graphics Forum © 2013 The Eurographics Association and John Wiley & Sons Ltd.
GRChombo: Numerical relativity with adaptive mesh refinement
Clough, Katy; Figueras, Pau; Finkel, Hal; Kunesch, Markus; Lim, Eugene A.; Tunyasuvunakool, Saran
2015-12-01
In this work, we introduce {\\mathtt{GRChombo}}: a new numerical relativity code which incorporates full adaptive mesh refinement (AMR) using block structured Berger-Rigoutsos grid generation. The code supports non-trivial ‘many-boxes-in-many-boxes’ mesh hierarchies and massive parallelism through the message passing interface. {\\mathtt{GRChombo}} evolves the Einstein equation using the standard BSSN formalism, with an option to turn on CCZ4 constraint damping if required. The AMR capability permits the study of a range of new physics which has previously been computationally infeasible in a full 3 + 1 setting, while also significantly simplifying the process of setting up the mesh for these problems. We show that {\\mathtt{GRChombo}} can stably and accurately evolve standard spacetimes such as binary black hole mergers and scalar collapses into black holes, demonstrate the performance characteristics of our code, and discuss various physics problems which stand to benefit from the AMR technique.
Retrofitting Masonry Walls with Carbon Mesh
Directory of Open Access Journals (Sweden)
Patrick Bischof
2014-01-01
Full Text Available Static-cyclic shear load tests and tensile tests on retrofitted masonry walls were conducted at UAS Fribourg for an evaluation of the newly developed retrofitting system, the S&P ARMO-System. This retrofitting system consists of a composite of carbon mesh embedded in a specially adapted high quality spray mortar. It can be applied with established construction techniques using traditional construction materials. The experimental study has shown that masonry walls reinforced by this retrofitting system reach a similar strength and a higher ductility than retrofits by means of bonded carbon fiber reinforced polymer sheets. Hence, the retrofitting system using carbon fiber meshes embedded in a high quality mortar constitutes a good option for static or seismic retrofits or reinforcements for masonry walls. However, the experimental studies also revealed that the mechanical anchorage of carbon mesh may be delicate depending on its design.
NASA Lewis Meshed VSAT Workshop meeting summary
Ivancic, William
1993-11-01
NASA Lewis Research Center's Space Electronics Division (SED) hosted a workshop to address specific topics related to future meshed very small-aperture terminal (VSAT) satellite communications networks. The ideas generated by this workshop will help to identify potential markets and focus technology development within the commercial satellite communications industry and NASA. The workshop resulted in recommendations concerning these principal points of interest: the window of opportunity for a meshed VSAT system; system availability; ground terminal antenna sizes; recommended multifrequency for time division multiple access (TDMA) uplink; a packet switch design concept for narrowband; and fault tolerance design concepts. This report presents a summary of group presentations and discussion associated with the technological, economic, and operational issues of meshed VSAT architectures that utilize processing satellites.
Mesh saliency with adaptive local patches
Nouri, Anass; Charrier, Christophe; Lézoray, Olivier
2015-03-01
3D object shapes (represented by meshes) include both areas that attract the visual attention of human observers and others less or not attractive at all. This visual attention depends on the degree of saliency exposed by these areas. In this paper, we propose a technique for detecting salient regions in meshes. To do so, we define a local surface descriptor based on local patches of adaptive size and filled with a local height field. The saliency of mesh vertices is then defined as its degree measure with edges weights computed from adaptive patch similarities. Our approach is compared to the state-of-the-art and presents competitive results. A study evaluating the influence of the parameters establishing this approach is also carried out. The strength and the stability of our approach with respect to noise and simplification are also studied.
Performance of a streaming mesh refinement algorithm.
Energy Technology Data Exchange (ETDEWEB)
Thompson, David C.; Pebay, Philippe Pierre
2004-08-01
In SAND report 2004-1617, we outline a method for edge-based tetrahedral subdivision that does not rely on saving state or communication to produce compatible tetrahedralizations. This report analyzes the performance of the technique by characterizing (a) mesh quality, (b) execution time, and (c) traits of the algorithm that could affect quality or execution time differently for different meshes. It also details the method used to debug the several hundred subdivision templates that the algorithm relies upon. Mesh quality is on par with other similar refinement schemes and throughput on modern hardware can exceed 600,000 output tetrahedra per second. But if you want to understand the traits of the algorithm, you have to read the report!
The generation of hexahedral meshes for assembly geometries: A survey
Energy Technology Data Exchange (ETDEWEB)
TAUTGES,TIMOTHY J.
2000-02-14
The finite element method is being used today to model component assemblies in a wide variety of application areas, including structural mechanics, fluid simulations, and others. Generating hexahedral meshes for these assemblies usually requires the use of geometry decomposition, with different meshing algorithms applied to different regions. While the primary motivation for this approach remains the lack of an automatic, reliable all-hexahedral meshing algorithm, requirements in mesh quality and mesh configuration for typical analyses are also factors. For these reasons, this approach is also sometimes required when producing other types of unstructured meshes. This paper will review progress to date in automating many parts of the hex meshing process, which has halved the time to produce all-hex meshes for large assemblies. Particular issues which have been exposed due to this progress will also be discussed, along with their applicability to the general unstructured meshing problem.
MESH FREE ESTIMATION OF THE STRUCTURE MODEL INDEX
Directory of Open Access Journals (Sweden)
Joachim Ohser
2011-05-01
Full Text Available The structure model index (SMI is a means of subsuming the topology of a homogeneous random closed set under just one number, similar to the isoperimetric shape factors used for compact sets. Originally, the SMI is defined as a function of volume fraction, specific surface area and first derivative of the specific surface area, where the derivative is defined and computed using a surface meshing. The generalised Steiner formula yields however a derivative of the specific surface area that is – up to a constant – the density of the integral of mean curvature. Consequently, an SMI can be defined without referring to a discretisation and it can be estimated from 3D image data without need to mesh the surface but using the number of occurrences of 2×2×2 pixel configurations, only. Obviously, it is impossible to completely describe a random closed set by one number. In this paper, Boolean models of balls and infinite straight cylinders serve as cautionary examples pointing out the limitations of the SMI. Nevertheless, shape factors like the SMI can be valuable tools for comparing similar structures. This is illustrated on real microstructures of ice, foams, and paper.
Open preperitoneal groin hernia repair with mesh
DEFF Research Database (Denmark)
Andresen, Kristoffer; Rosenberg, Jacob
2017-01-01
A systematic review was conducted and reported according to the PRISMA statement. PubMed, Cochrane library and Embase were searched systematically. Studies were included if they provided clinical data with more than 30 days follow up following repair of an inguinal hernia with an open preperitoneal mesh......Background For the repair of inguinal hernias, several surgical methods have been presented where the purpose is to place a mesh in the preperitoneal plane through an open access. The aim of this systematic review was to describe preperitoneal repairs with emphasis on the technique. Data sources...
Adaptive mesh refinement for storm surge
Mandli, Kyle T.
2014-03-01
An approach to utilizing adaptive mesh refinement algorithms for storm surge modeling is proposed. Currently numerical models exist that can resolve the details of coastal regions but are often too costly to be run in an ensemble forecasting framework without significant computing resources. The application of adaptive mesh refinement algorithms substantially lowers the computational cost of a storm surge model run while retaining much of the desired coastal resolution. The approach presented is implemented in the GeoClaw framework and compared to ADCIRC for Hurricane Ike along with observed tide gauge data and the computational cost of each model run. © 2014 Elsevier Ltd.
Relativistic MHD with Adaptive Mesh Refinement
Anderson, M; Liebling, S L; Neilsen, D; Anderson, Matthew; Hirschmann, Eric; Liebling, Steven L.; Neilsen, David
2006-01-01
We solve the relativistic magnetohydrodynamics (MHD) equations using a finite difference Convex ENO method (CENO) in 3+1 dimensions within a distributed parallel adaptive mesh refinement (AMR) infrastructure. In flat space we examine a Balsara blast wave problem along with a spherical blast wave and a relativistic rotor test both with unigrid and AMR simulations. The AMR simulations substantially improve performance while reproducing the resolution equivalent unigrid simulation results. We also investigate the impact of hyperbolic divergence cleaning for the spherical blast wave and relativistic rotor. We include unigrid and mesh refinement parallel performance measurements for the spherical blast wave.
Laparoscopic rectocele repair using polyglactin mesh.
Lyons, T L; Winer, W K
1997-05-01
We assessed the efficacy of laparoscopic treatment of rectocele defect using a polyglactin mesh graft. From May 1, 1995, through September 30, 1995, we prospectively evaluated 20 women (age 38-74 yrs) undergoing pelvic floor reconstruction for symptomatic pelvic floor prolapse, with or without hysterectomy. Morbidity of the procedure was extremely low compared with standard transvaginal and transrectal approaches. Patients were followed at 3-month intervals for 1 year. Sixteen had resolution of symptoms. Laparoscopic application of polyglactin mesh for the repair of the rectocele defect is a viable option, although long-term follow-up is necessary.
Adaptive Mesh Refinement for Storm Surge
Mandli, Kyle T
2014-01-01
An approach to utilizing adaptive mesh refinement algorithms for storm surge modeling is proposed. Currently numerical models exist that can resolve the details of coastal regions but are often too costly to be run in an ensemble forecasting framework without significant computing resources. The application of adaptive mesh refinement algorithms substantially lowers the computational cost of a storm surge model run while retaining much of the desired coastal resolution. The approach presented is implemented in the \\geoclaw framework and compared to \\adcirc for Hurricane Ike along with observed tide gauge data and the computational cost of each model run.
Energy Technology Data Exchange (ETDEWEB)
Ozawa, M. [Kansai University, Osaka (Japan). Dept. Mechanical Engineering
1999-11-10
The design of the reproduction apparatus in stirling refrigerating machine is the important factor, which controls the performance of the refrigerating machine. Though in present state, the mesh structure is mainly used, it is difficult that estimate and evaluate the heat transfer performance, and it is dependent on the empirical formula based on test data. Here, stack type reproduction apparatus and resonance refrigerating machine stack are also explained on effect grasp of each parameter on derivation of the scaling parameter and heat transfer, effect of boundary condition on heat transfer characteristic besides using the numerical simulation in search of heat transfer characteristic of a both ways oscillating flow field in included system. (NEDO)
Block-structured adaptive meshes and reduced grids for atmospheric general circulation models.
Jablonowski, Christiane; Oehmke, Robert C; Stout, Quentin F
2009-11-28
Adaptive mesh refinement techniques offer a flexible framework for future variable-resolution climate and weather models since they can focus their computational mesh on certain geographical areas or atmospheric events. Adaptive meshes can also be used to coarsen a latitude-longitude grid in polar regions. This allows for the so-called reduced grid setups. A spherical, block-structured adaptive grid technique is applied to the Lin-Rood finite-volume dynamical core for weather and climate research. This hydrostatic dynamics package is based on a conservative and monotonic finite-volume discretization in flux form with vertically floating Lagrangian layers. The adaptive dynamical core is built upon a flexible latitude-longitude computational grid and tested in two- and three-dimensional model configurations. The discussion is focused on static mesh adaptations and reduced grids. The two-dimensional shallow water setup serves as an ideal testbed and allows the use of shallow water test cases like the advection of a cosine bell, moving vortices, a steady-state flow, the Rossby-Haurwitz wave or cross-polar flows. It is shown that reduced grid configurations are viable candidates for pure advection applications but should be used moderately in nonlinear simulations. In addition, static grid adaptations can be successfully used to resolve three-dimensional baroclinic waves in the storm-track region.
Parallel octree-based hexahedral mesh generation for eulerian to lagrangian conversion.
Energy Technology Data Exchange (ETDEWEB)
Staten, Matthew L.; Owen, Steven James
2010-09-01
Computational simulation must often be performed on domains where materials are represented as scalar quantities or volume fractions at cell centers of an octree-based grid. Common examples include bio-medical, geotechnical or shock physics calculations where interface boundaries are represented only as discrete statistical approximations. In this work, we introduce new methods for generating Lagrangian computational meshes from Eulerian-based data. We focus specifically on shock physics problems that are relevant to ASC codes such as CTH and Alegra. New procedures for generating all-hexahedral finite element meshes from volume fraction data are introduced. A new primal-contouring approach is introduced for defining a geometric domain. New methods for refinement, node smoothing, resolving non-manifold conditions and defining geometry are also introduced as well as an extension of the algorithm to handle tetrahedral meshes. We also describe new scalable MPI-based implementations of these procedures. We describe a new software module, Sculptor, which has been developed for use as an embedded component of CTH. We also describe its interface and its use within the mesh generation code, CUBIT. Several examples are shown to illustrate the capabilities of Sculptor.
MeshEZW: an image coder using mesh and finite elements
Landais, Thomas; Bonnaud, Laurent; Chassery, Jean-Marc
2003-08-01
In this paper, we present a new method to compress the information in an image, called MeshEZW. The proposed approach is based on the finite elements method, a mesh construction and a zerotree method. The zerotree method is an adaptive of the EZW algorithm with two new symbols for increasing the performance. These steps allow a progressive representation of the image by the automatic construction of a bitstream. The mesh structure is adapted to the image compression domain and is defined to allow video comrpession. The coder is described and some preliminary results are discussed.
Euler Flow Computations on Non-Matching Unstructured Meshes
Gumaste, Udayan
1999-01-01
Advanced fluid solvers to predict aerodynamic performance-coupled treatment of multiple fields are described. The interaction between the fluid and structural components in the bladed regions of the engine is investigated with respect to known blade failures caused by either flutter or forced vibrations. Methods are developed to describe aeroelastic phenomena for internal flows in turbomachinery by accounting for the increased geometric complexity, mutual interaction between adjacent structural components and presence of thermal and geometric loading. The computer code developed solves the full three dimensional aeroelastic problem of-stage. The results obtained show that flow computations can be performed on non-matching finite-volume unstructured meshes with second order spatial accuracy.
Block-structured Adaptive Mesh Refinement - Theory, Implementation and Application
Directory of Open Access Journals (Sweden)
Deiterding Ralf
2011-12-01
Full Text Available Structured adaptive mesh refinement (SAMR techniques can enable cutting-edge simulations of problems governed by conservation laws. Focusing on the strictly hyperbolic case, these notes explain all algorithmic and mathematical details of a technically relevant implementation tailored for distributed memory computers. An overview of the background of commonly used finite volume discretizations for gas dynamics is included and typical benchmarks to quantify accuracy and performance of the dynamically adaptive code are discussed. Large-scale simulations of shock-induced realistic combustion in non-Cartesian geometry and shock-driven fluid-structure interaction with fully coupled dynamic boundary motion demonstrate the applicability of the discussed techniques for complex scenarios.
Stabilization of RNA stacking by pseudouridine.
Davis, D R
1995-01-01
The effect of the modified nucleoside pseudouridine (psi) on RNA structure was compared with uridine. The extent of base stacking in model RNA oligonucleotides was measured by 1H NMR, UV, and CD spectroscopy. The UV and CD results indicate that the model single-stranded oligoribonucleotides AAUA and AA psi A form stacked structures in solution and the CD results for AA psi A are consistent with a general A-form helical conformation. The AA psi A oligomer exhibits a greater degree of UV hypochromicity over the temperature range 5-55 degrees C, consistent with a better stacked, more A-form structure compared with AAUA. The extent of stacking for each nucleotide residue was inferred from the percent 3'-endo sugar conformation as indicated by the H1'-H2' NMR scalar coupling. This indirect indication of stacking was confirmed by sequential NOE experiments. NMR measurements as a function of temperature indicate that pseudouridine forms a more stable base stacking arrangement than uridine, an effect that is propagated throughout the helix to stabilize stacking of neighboring purine nucleosides. The N1-H imino proton in AA psi A exchanges slowly with solvent, suggesting a role for the extra imino proton in stabilizing the conformation of pseudouridine. These results show that the conformational stabilization is an intrinsic property of pseudouridine occurring at the nucleotide level. The characteristics of pseudouridine in these models are consistent with earlier studies on intact rRNA, indicating that pseudouridine probably performs the same stabilizing function in most structural contexts. PMID:8559660
Start-Stop Test Procedures on the PEMFC Stack Level
DEFF Research Database (Denmark)
Mitzel, Jens; Nygaard, Frederik; Veltzé, Sune
The test is addressed to investigate the influence on stack durability of a long stop followed by a restart of a stack. Long stop should be defined as a stop in which the anodic compartment is fully filled by air due to stack leakages. In systems, leakage level of the stack is low and time to fil...
Constrained and joint inversion on unstructured meshes
Doetsch, J.; Jordi, C.; Rieckh, V.; Guenther, T.; Schmelzbach, C.
2015-12-01
Unstructured meshes allow for inclusion of arbitrary surface topography, complex acquisition geometry and undulating geological interfaces in the inversion of geophysical data. This flexibility opens new opportunities for coupling different geophysical and hydrological data sets in constrained and joint inversions. For example, incorporating geological interfaces that have been derived from high-resolution geophysical data (e.g., ground penetrating radar) can add geological constraints to inversions of electrical resistivity data. These constraints can be critical for a hydrogeological interpretation of the inversion results. For time-lapse inversions of geophysical data, constraints can be derived from hydrological point measurements in boreholes, but it is difficult to include these hard constraints in the inversion of electrical resistivity monitoring data. Especially mesh density and the regularization footprint around the hydrological point measurements are important for an improved inversion compared to the unconstrained case. With the help of synthetic and field examples, we analyze how regularization and coupling operators should be chosen for time-lapse inversions constrained by point measurements and for joint inversions of geophysical data in order to take full advantage of the flexibility of unstructured meshes. For the case of constraining to point measurements, it is important to choose a regularization operator that extends beyond the neighboring cells and the uncertainty in the point measurements needs to be accounted for. For joint inversion, the choice of the regularization depends on the expected subsurface heterogeneity and the cell size of the parameter mesh.
Hash functions and triangular mesh reconstruction*1
Hrádek, Jan; Kuchař, Martin; Skala, Václav
2003-07-01
Some applications use data formats (e.g. STL file format), where a set of triangles is used to represent the surface of a 3D object and it is necessary to reconstruct the triangular mesh with adjacency information. It is a lengthy process for large data sets as the time complexity of this process is O( N log N), where N is number of triangles. Triangular mesh reconstruction is a general problem and relevant algorithms can be used in GIS and DTM systems as well as in CAD/CAM systems. Many algorithms rely on space subdivision techniques while hash functions offer a more effective solution to the reconstruction problem. Hash data structures are widely used throughout the field of computer science. The hash table can be used to speed up the process of triangular mesh reconstruction but the speed strongly depends on hash function properties. Nevertheless the design or selection of the hash function for data sets with unknown properties is a serious problem. This paper describes a new hash function, presents the properties obtained for large data sets, and discusses validity of the reconstructed surface. Experimental results proved theoretical considerations and advantages of hash function use for mesh reconstruction.
Particle Collection Efficiency for Nylon Mesh Screens.
Cena, Lorenzo G; Ku, Bon-Ki; Peters, Thomas M
Mesh screens composed of nylon fibers leave minimal residual ash and produce no significant spectral interference when ashed for spectrometric examination. These characteristics make nylon mesh screens attractive as a collection substrate for nanoparticles. A theoretical single-fiber efficiency expression developed for wire-mesh screens was evaluated for estimating the collection efficiency of submicrometer particles for nylon mesh screens. Pressure drop across the screens, the effect of particle morphology (spherical and highly fractal) on collection efficiency and single-fiber efficiency were evaluated experimentally for three pore sizes (60, 100 and 180 μm) at three flow rates (2.5, 4 and 6 Lpm). The pressure drop across the screens was found to increase linearly with superficial velocity. The collection efficiency of the screens was found to vary by less than 4% regardless of particle morphology. Single-fiber efficiency calculated from experimental data was in good agreement with that estimated from theory for particles between 40 and 150 nm but deviated from theory for particles outside this size range. New coefficients for the single-fiber efficiency model were identified that minimized the sum of square error (SSE) between the values estimated with the model and those determined experimentally. Compared to the original theory, the SSE calculated using the modified theory was at least one order of magnitude lower for all screens and flow rates with the exception of the 60-μm pore screens at 2.5 Lpm, where the decrease was threefold.
Mesh Optimization for Ground Vehicle Aerodynamics
Directory of Open Access Journals (Sweden)
Adrian Gaylard
2010-04-01
Full Text Available
Mesh optimization strategy for estimating accurate drag of a ground vehicle is proposed based on examining the effect of different mesh parameters. The optimized mesh parameters were selected using design of experiment (DOE method to be able to work in a limited memory environment and in a reasonable amount of time but without compromising the accuracy of results. The study was further extended to take into account the car model size effect. Three car model sizes have been investigated and compared with MIRA scale wind tunnel results. Parameters that lead to drag value closer to experiment with less memory and computational time have been identified. Scaling the optimized mesh size with the length of car model was successfully used to predict the drag of the other car sizes with reasonable accuracy. This investigation was carried out using STARCCM+ commercial software package, however the findings can be applied to any other CFD package.
Details of tetrahedral anisotropic mesh adaptation
Jensen, Kristian Ejlebjerg; Gorman, Gerard
2016-04-01
We have implemented tetrahedral anisotropic mesh adaptation using the local operations of coarsening, swapping, refinement and smoothing in MATLAB without the use of any for- N loops, i.e. the script is fully vectorised. In the process of doing so, we have made three observations related to details of the implementation: 1. restricting refinement to a single edge split per element not only simplifies the code, it also improves mesh quality, 2. face to edge swapping is unnecessary, and 3. optimising for the Vassilevski functional tends to give a little higher value for the mean condition number functional than optimising for the condition number functional directly. These observations have been made for a uniform and a radial shock metric field, both starting from a structured mesh in a cube. Finally, we compare two coarsening techniques and demonstrate the importance of applying smoothing in the mesh adaptation loop. The results pertain to a unit cube geometry, but we also show the effect of corners and edges by applying the implementation in a spherical geometry.
Drag reduction properties of superhydrophobic mesh pipes
Geraldi, Nicasio R.; Dodd, Linzi E.; Xu, Ben B.; Wells, Gary G.; Wood, David; Newton, Michael I.; McHale, Glen
2017-09-01
Even with the recent extensive study into superhydrophobic surfaces, the fabrication of such surfaces on the inside walls of a pipe remains challenging. In this work we report a convenient bi-layered pipe design using a thin superhydrophobic metallic mesh formed into a tube, supported inside another pipe. A flow system was constructed to test the fabricated bi-layer pipeline, which allowed for different constant flow rates of water to be passed through the pipe, whilst the differential pressure was measured, from which the drag coefficient (ƒ) and Reynolds numbers (Re) were calculated. Expected values of ƒ were found for smooth glass pipes for the Reynolds number (Re) range 750-10 000, in both the laminar and part of the turbulent regimes. Flow through plain meshes without the superhydrophobic coating were also measured over a similar range (750 superhydrophobic coating, ƒ was found for 4000 superhydrophobic mesh can support a plastron and provide a drag reduction compared to a plain mesh, however, the plastron is progressively destroyed with use and in particular at higher flow rates.
Performance Evaluation of Coded Meshed Networks
DEFF Research Database (Denmark)
Krigslund, Jeppe; Hansen, Jonas; Pedersen, Morten Videbæk;
2013-01-01
of the former to enhance the gains of the latter. We first motivate our work through measurements in WiFi mesh networks. Later, we compare state-of-the-art approaches, e.g., COPE, RLNC, to CORE. Our measurements show the higher reliability and throughput of CORE over other schemes, especially, for asymmetric...
Mesh Currents and Josephson Junction Arrays
1995-01-01
A simple but accurate mesh current analysis is performed on a XY model and on a SIMF model to derive the equations for a Josephson junction array. The equations obtained here turn out to be different from other equations already existing in the literature. Moreover, it is shown that the two models come from an unique hidden structure
EmuStack: An OpenStack-Based DTN Network Emulation Platform (Extended Version
Directory of Open Access Journals (Sweden)
Haifeng Li
2016-01-01
Full Text Available With the advancement of computing and network virtualization technology, the networking research community shows great interest in network emulation. Compared with network simulation, network emulation can provide more relevant and comprehensive details. In this paper, EmuStack, a large-scale real-time emulation platform for Delay Tolerant Network (DTN, is proposed. EmuStack aims at empowering network emulation to become as simple as network simulation. Based on OpenStack, distributed synchronous emulation modules are developed to enable EmuStack to implement synchronous and dynamic, precise, and real-time network emulation. Meanwhile, the lightweight approach of using Docker container technology and network namespaces allows EmuStack to support a (up to hundreds of nodes large-scale topology with only several physical nodes. In addition, EmuStack integrates the Linux Traffic Control (TC tools with OpenStack for managing and emulating the virtual link characteristics which include variable bandwidth, delay, loss, jitter, reordering, and duplication. Finally, experiences with our initial implementation suggest the ability to run and debug experimental network protocol in real time. EmuStack environment would bring qualitative change in network research works.
Levitation characteristics of HTS tape stacks
Energy Technology Data Exchange (ETDEWEB)
Pokrovskiy, S. V.; Ermolaev, Y. S.; Rudnev, I. A. [National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow (Russian Federation)
2015-03-15
Due to the considerable development of the technology of second generation high-temperature superconductors and a significant improvement in their mechanical and transport properties in the last few years it is possible to use HTS tapes in the magnetic levitation systems. The advantages of tapes on a metal substrate as compared with bulk YBCO material primarily in the strength, and the possibility of optimizing the convenience of manufacturing elements of levitation systems. In the present report presents the results of the magnetic levitation force measurements between the stack of HTS tapes containing of tapes and NdFeB permanent magnet in the FC and ZFC regimes. It was found a non- linear dependence of the levitation force from the height of the array of stack in both modes: linear growth at small thickness gives way to flattening and constant at large number of tapes in the stack. Established that the levitation force of stacks comparable to that of bulk samples. The numerical calculations using finite element method showed that without the screening of the applied field the levitation force of the bulk superconductor and the layered superconductor stack with a critical current of tapes increased by the filling factor is exactly the same, and taking into account the screening force slightly different.
Fungal melanins differ in planar stacking distances.
Casadevall, Arturo; Nakouzi, Antonio; Crippa, Pier R; Eisner, Melvin
2012-01-01
Melanins are notoriously difficult to study because they are amorphous, insoluble and often associated with other biological materials. Consequently, there is a dearth of structural techniques to study this enigmatic pigment. Current models of melanin structure envision the stacking of planar structures. X ray diffraction has historically been used to deduce stacking parameters. In this study we used X ray diffraction to analyze melanins derived from Cryptococcus neoformans, Aspergillus niger, Wangiella dermatitides and Coprinus comatus. Analysis of melanin in melanized C. neoformans encapsulated cells was precluded by the fortuitous finding that the capsular polysaccharide had a diffraction spectrum that was similar to that of isolated melanin. The capsular polysaccharide spectrum was dominated by a broad non-Bragg feature consistent with origin from a repeating structural motif that may arise from inter-molecular interactions and/or possibly gel organization. Hence, we isolated melanin from each fungal species and compared diffraction parameters. The results show that the inferred stacking distances of fungal melanins differ from that reported for synthetic melanin and neuromelanin, occupying intermediate position between these other melanins. These results suggest that all melanins have a fundamental diffracting unit composed of planar graphitic assemblies that can differ in stacking distance. The stacking peak appears to be a distinguishing universal feature of melanins that may be of use in characterizing these enigmatic pigments.
Bucki, M; Bucki, Marek; Payan, Yohan
2005-01-01
In this paper, we address the problem of automatic mesh generation for finite elements modeling of anatomical organs for which a volumetric data set is available. In the first step a set of characteristic outlines of the organ is defined manually or automatically within the volume. The outlines define the "key frames" that will guide the procedure of surface reconstruction. Then, based on this information, and along with organ surface curvature information extracted from the volume data, a 3D scalar field is generated. This field allows a 3D reconstruction of the organ: as an iso-surface model, using a marching cubes algorithm; or as a 3D mesh, using a grid "immersion" technique, the field value being used as the outside/inside test. The final reconstruction respects the various topological changes that occur within the organ, such as holes and branching elements.
Oxidation and degradation of polypropylene transvaginal mesh.
Talley, Anne D; Rogers, Bridget R; Iakovlev, Vladimir; Dunn, Russell F; Guelcher, Scott A
2017-04-01
Polypropylene (PP) transvaginal mesh (TVM) repair for stress urinary incontinence (SUI) has shown promising short-term objective cure rates. However, life-altering complications have been associated with the placement of PP mesh for SUI repair. PP degradation as a result of the foreign body reaction (FBR) has been proposed as a contributing factor to mesh complications. We hypothesized that PP oxidizes under in vitro conditions simulating the FBR, resulting in degradation of the PP. Three PP mid-urethral slings from two commercial manufacturers were evaluated. Test specimens (n = 6) were incubated in oxidative medium for up to 5 weeks. Oxidation was assessed by Fourier Transform Infrared Spectroscopy (FTIR), and degradation was evaluated by scanning electron microscopy (SEM). FTIR spectra of the slings revealed evidence of carbonyl and hydroxyl peaks after 5 weeks of incubation time, providing evidence of oxidation of PP. SEM images at 5 weeks showed evidence of surface degradation, including pitting and flaking. Thus, oxidation and degradation of PP pelvic mesh were evidenced by chemical and physical changes under simulated in vivo conditions. To assess changes in PP surface chemistry in vivo, fibers were recovered from PP mesh explanted from a single patient without formalin fixation, untreated (n = 5) or scraped (n = 5) to remove tissue, and analyzed by X-ray photoelectron spectroscopy. Mechanical scraping removed adherent tissue, revealing an underlying layer of oxidized PP. These findings underscore the need for further research into the relative contribution of oxidative degradation to complications associated with PP-based TVM devices in larger cohorts of patients.
Wireless Mesh Network Routing Under Uncertain Demands
Wellons, Jonathan; Dai, Liang; Chang, Bin; Xue, Yuan
Traffic routing plays a critical role in determining the performance of a wireless mesh network. Recent research results usually fall into two ends of the spectrum. On one end are the heuristic routing algorithms, which are highly adaptive to the dynamic environments of wireless networks yet lack the analytical properties of how well the network performs globally. On the other end are the optimal routing algorithms that are derived from the optimization problem formulation of mesh network routing. They can usually claim analytical properties such as resource use optimality and throughput fairness. However, traffic demand is usually implicitly assumed as static and known a priori in these problem formulations. In contrast, recent studies of wireless network traces show that the traffic demand, even being aggregated at access points, is highly dynamic and hard to estimate. Thus, to apply the optimization-based routing solution in practice, one must take into account the dynamic and uncertain nature of wireless traffic demand. There are two basic approaches to address the traffic uncertainty in optimal mesh network routing (1) predictive routing that infers the traffic demand with maximum possibility based in its history and optimizes the routing strategy based on the predicted traffic demand and (2) oblivious routing that considers all the possible traffic demands and selects the routing strategy where the worst-case network performance could be optimized. This chapter provides an overview of the optimal routing strategies for wireless mesh networks with a focus on the above two strategies that explicitly consider the traffic uncertainty. It also identifies the key factors that affect the performance of each routing strategy and provides guidelines towards the strategy selection in mesh network routing under uncertain traffic demands.
The mesh-matching algorithm: an automatic 3D mesh generator for Finite element structures
Couteau, B; Lavallee, S; Payan, Yohan; Lavallee, St\\'{e}phane
2000-01-01
Several authors have employed Finite Element Analysis (FEA) for stress and strain analysis in orthopaedic biomechanics. Unfortunately, the use of three-dimensional models is time consuming and consequently the number of analysis to be performed is limited. The authors have investigated a new method allowing automatically 3D mesh generation for structures as complex as bone for example. This method called Mesh-Matching (M-M) algorithm generated automatically customized 3D meshes of bones from an already existing model. The M-M algorithm has been used to generate FE models of ten proximal human femora from an initial one which had been experimentally validated. The new meshes seemed to demonstrate satisfying results.
Randomized clinical trial of self-gripping mesh versus sutured mesh for Lichtenstein hernia repair
DEFF Research Database (Denmark)
Jorgensen, L N; Sommer, T; Assaadzadeh, S;
2012-01-01
between the groups in postoperative complications (33·7 versus 40·4 per cent; P = 0·215), rate of recurrent hernia within 1 year (1·2 per cent in both groups) or quality of life. CONCLUSION: The avoidance of suture fixation using a self-gripping mesh was not accompanied by a reduction in chronic symptoms......BACKGROUND: Many patients develop discomfort after open repair of a groin hernia. It was hypothesized that suture fixation of the mesh is a cause of these symptoms. METHODS: This patient- and assessor-blinded randomized multicentre clinical trial compared a self-gripping mesh (Parietene Progrip......(®) ) and sutured mesh for open primary repair of uncomplicated inguinal hernia by the Lichtenstein technique. Patients were assessed before surgery, on the day of operation, and at 1 and 12 months after surgery. The primary endpoint was moderate or severe symptoms after 12 months, including a combination...
Dynamic Model of High Temperature PEM Fuel Cell Stack Temperature
DEFF Research Database (Denmark)
Andreasen, Søren Juhl; Kær, Søren Knudsen
2007-01-01
cathode air cooled 30 cell HTPEM fuel cell stack developed at the Institute of Energy Technology at Aalborg University. This fuel cell stack uses PEMEAS Celtec P-1000 membranes, runs on pure hydrogen in a dead end anode configuration with a purge valve. The cooling of the stack is managed by running...... conduction through stack insulation, cathode air convection and heating of the inlet gasses in manifold. Various measurements are presented to validate the model predictions of the stack temperatures....
Moving mesh generation with a sequential approach for solving PDEs
DEFF Research Database (Denmark)
of physical and mesh equations suffers typically from long computation time due to highly nonlinear coupling between the two equations. Moreover, the extended system (physical and mesh equations) may be sensitive to the tuning parameters such as a temporal relaxation factor. It is therefore useful to design...... adaptive grid method (local refinement by adding/deleting the meshes at a discrete time level) as well as of efficiency for the dynamic adaptive grid method (or moving mesh method) where the number of meshes is not changed. For illustration, a phase change problem is solved with the decomposition algorithm.......In moving mesh methods, physical PDEs and a mesh equation derived from equidistribution of an error metrics (so-called the monitor function) are simultaneously solved and meshes are dynamically concentrated on steep regions (Lim et al., 2001). However, the simultaneous solution procedure...
On combining Laplacian and optimization-based mesh smoothing techniques
Energy Technology Data Exchange (ETDEWEB)
Freitag, L.A.
1997-07-01
Local mesh smoothing algorithms have been shown to be effective in repairing distorted elements in automatically generated meshes. The simplest such algorithm is Laplacian smoothing, which moves grid points to the geometric center of incident vertices. Unfortunately, this method operates heuristically and can create invalid meshes or elements of worse quality than those contained in the original mesh. In contrast, optimization-based methods are designed to maximize some measure of mesh quality and are very effective at eliminating extremal angles in the mesh. These improvements come at a higher computational cost, however. In this article the author proposes three smoothing techniques that combine a smart variant of Laplacian smoothing with an optimization-based approach. Several numerical experiments are performed that compare the mesh quality and computational cost for each of the methods in two and three dimensions. The author finds that the combined approaches are very cost effective and yield high-quality meshes.
An efficient 3D traveltime calculation using coarse-grid mesh for shallow-depth source
Son, Woohyun; Pyun, Sukjoon; Lee, Ho-Young; Koo, Nam-Hyung; Shin, Changsoo
2016-10-01
3D Kirchhoff pre-stack depth migration requires an efficient algorithm to compute first-arrival traveltimes. In this paper, we exploited a wave-equation-based traveltime calculation algorithm, which is called the suppressed wave equation estimation of traveltime (SWEET), and the equivalent source distribution (ESD) algorithm. The motivation of using the SWEET algorithm is to solve the Laplace-domain wave equation using coarse grid spacing to calculate first-arrival traveltimes. However, if a real source is located at shallow-depth close to free surface, we cannot accurately calculate the wavefield using coarse grid spacing. So, we need an additional algorithm to correctly simulate the shallow source even for the coarse grid mesh. The ESD algorithm is a method to define a set of distributed nodal sources that approximate a point source at the inter-nodal location in a velocity model with large grid spacing. Thanks to the ESD algorithm, we can efficiently calculate the first-arrival traveltimes of waves emitted from shallow source point even when we solve the Laplace-domain wave equation using a coarse-grid mesh. The proposed algorithm is applied to the SEG/EAGE 3D salt model. From the result, we note that the combination of SWEET and ESD algorithms can be successfully used for the traveltime calculation under the condition of a shallow-depth source. We also confirmed that our algorithm using coarse-grid mesh requires less computational time than the conventional SWEET algorithm using relatively fine-grid mesh.
INCISIONAL HERNIA - ONLAY VS SUBLAY MESH HERNIOPLAS T Y
Ravi Kamal Kumar; Chandrakumar; Vijayalaxmi,; Thokala; Venkat Ramana
2015-01-01
BACKGROUND : Incisional hernia is a common surgical problem. Anatomical repair of hernia is now out of vogue. Polypropylene mesh repair has now become accepted. In open mesh repair of incisional hernia cases the site of placement of mesh is still debated. Some surgeo ns favour the onlay repair and others use sublay or retro - rectus plane for deployment of the mesh. AIM: The aim of the study is to examine the pros and cons of both the techniques and find the bett...
Explicit inverse distance weighting mesh motion for coupled problems
Witteveen, J.A.S.; Bijl, H.
2009-01-01
An explicit mesh motion algorithm based on inverse distance weighting interpolation is presented. The explicit formulation leads to a fast mesh motion algorithm and an easy implementation. In addition, the proposed point-by-point method is robust and flexible in case of large deformations, hanging nodes, and parallelization. Mesh quality results and CPU time comparisons are presented for triangular and hexahedral unstructured meshes in an airfoil flutter fluid-structure interaction problem.
Two-scale meshes in quasilinear discretized problems of computational mechanics
Jarošová, P.; Vala, J.
2016-06-01
Some problems of continuum mechanics, as the analysis of crack formation in the cohesive zone modelling, require (at least) two-scale numerical approach to finite element (or volume, difference, etc.) computations: i) at the macro-scale for a whole (nearly elastic, partially damaged) body and ii) at the micro-scale near the crack (a new interior surface). The paper presents an always convergent procedure handling overlapping two-scale meshes for such model problems, open to generalizations in many directions.
High frequency model of stacked film capacitors
Talbert, T.; Joubert, C.; Daude, N.; Glaize, C.
2001-11-01
Polypropylene metallized capacitors are of general use in power electronics because of their reliability, their self-healing capabilities, and their low price. Though the behavior of metallized coiled capacitors has been discussed, no work has been carried out on stacked and flattened metallized capacitors. The purpose of this article is to suggest an analytical model of resonance frequency, stray inductance and impedance of stacked capacitors. We first solve the equation of propagation of the magnetic potential vector (A) in the dielectric of an homogeneous material. Then, we suggest an original method of resolution, like the one used for resonant cavities, in order to present an analytical solution of the problem. Finally, we give some experimental results proving that the physical knowledge of the parameters of the capacitor (dimension of the component, and material constants), enables us to calculate an analytical model of resonance frequency, stray inductance and impedance of stacked capacitors.
A stack of cards rebuilt with calculus
Kazachkov, Alexander; Kireš, Marián
2017-07-01
Previous work covers building a tower from a stack of homogeneous rectangular plates, each with a maximum shift in displacement. We suggest using plates shaped as curvilinear triangles bounded by segments of power-law functions. The masses of the plates and the position of their center of mass are calculated and measured experimentally after cutting them out from cardboard and aluminum sheets. A computer simulation of the displacement towers is combined with their live building. Individual maximum shifts of the plates in the stack prove to be much bigger the higher the power coefficient of the boundary curves. The resulting total overhang of such a displacement tower may exceed that of a stack of traditionally used homogeneous rectangular cards.
Simple model of stacking-fault energies
DEFF Research Database (Denmark)
Stokbro, Kurt; Jacobsen, Lærke Wedel
1993-01-01
-density calculations of stacking-fault energies, and gives a simple way of understanding the calculated energy contributions from the different atomic layers in the stacking-fault region. The two parameters in the model describe the relative energy contributions of the s and d electrons in the noble and transition......A simple model for the energetics of stacking faults in fcc metals is constructed. The model contains third-nearest-neighbor pairwise interactions and a term involving the fourth moment of the electronic density of states. The model is in excellent agreement with recently published local...... metals, and thereby explain the pronounced differences in energetics in these two classes of metals. The model is discussed in the framework of the effective-medium theory where it is possible to find a functional form for the pair potential and relate the contribution associated with the fourth moment...
Progress of MCFC stack technology at Toshiba
Energy Technology Data Exchange (ETDEWEB)
Hori, M.; Hayashi, T.; Shimizu, Y. [Toshiba Corp., Tokyo (Japan)
1996-12-31
Toshiba is working on the development of MCFC stack technology; improvement of cell characteristics, and establishment of separator technology. For the cell technology, Toshiba has concentrated on both the restraints of NiO cathode dissolution and electrolyte loss from cells, which are the critical issues to extend cell life in MCFC, and great progress has been made. On the other hand, recognizing that the separator is one of key elements in accomplishing reliable and cost-competitive MCFC stacks, Toshiba has been accelerating the technology establishment and verification of an advanced type separator. A sub-scale stack with such a separator was provided for an electric generating test, and has been operated for more than 10,000 hours. This paper presents several topics obtained through the technical activities in the MCFC field at Toshiba.
On Reducing Delay in Mesh-Based P2P Streaming: A Mesh-Push Approach
Liu, Zheng; Xue, Kaiping; Hong, Peilin
The peer-assisted streaming paradigm has been widely employed to distribute live video data on the internet recently. In general, the mesh-based pull approach is more robust and efficient than the tree-based push approach. However, pull protocol brings about longer streaming delay, which is caused by the handshaking process of advertising buffer map message, sending request message and scheduling of the data block. In this paper, we propose a new approach, mesh-push, to address this issue. Different from the traditional pull approach, mesh-push implements block scheduling algorithm at sender side, where the block transmission is initiated by the sender rather than by the receiver. We first formulate the optimal upload bandwidth utilization problem, then present the mesh-push approach, in which a token protocol is designed to avoid block redundancy; a min-cost flow model is employed to derive the optimal scheduling for the push peer; and a push peer selection algorithm is introduced to reduce control overhead. Finally, we evaluate mesh-push through simulation, the results of which show mesh-push outperforms the pull scheduling in streaming delay, and achieves comparable delivery ratio at the same time.
Zhang, Xiaoli; Zou, Jie; Le, Daniel X.; Thoma, George
2010-01-01
"Investigator Names" is a newly required field in MEDLINE citations. It consists of personal names listed as members of corporate organizations in an article. Extracting investigator names automatically is necessary because of the increasing volume of articles reporting collaborative biomedical research in which a large number of investigators participate. In this paper, we present an SVM-based stacked sequential learning method in a novel application - recognizing named entities such as the first and last names of investigators from online medical journal articles. Stacked sequential learning is a meta-learning algorithm which can boost any base learner. It exploits contextual information by adding the predicted labels of the surrounding tokens as features. We apply this method to tag words in text paragraphs containing investigator names, and demonstrate that stacked sequential learning improves the performance of a nonsequential base learner such as an SVM classifier.
Scaled-up dual anode/cathode microbial fuel cell stack for actual ethanolamine wastewater treatment.
An, Byung-Min; Heo, Yoon; Maitlo, Hubdar-Ali; Park, Joo-Yang
2016-06-01
The aim of this work was to develop the scale-up microbial fuel cell technology for actual ethanolamine wastewater treatment, dual anode/cathode MFC stacks connected in series to achieve any desired current, treatment capacity, and volume capacity. However, after feeding actual wastewater into the MFC, maximum power density decreased while the corresponding internal resistance increased. With continuous electricity production, a stack of eight MFCs in series achieved 96.05% of COD removal and 97.30% of ammonia removal at a flow rate of 15.98L/d (HRT 12h). The scaled-up dual anode/cathode MFC stack system in this research was demonstrated to treat actual ETA wastewater with the added benefit of harvesting electricity energy. Copyright © 2016 Elsevier Ltd. All rights reserved.
Energy Technology Data Exchange (ETDEWEB)
Pavlidis, D.; Lathouwers, D. [Delft Univ. of Tech., Section Physics of Nuclear Reactors, Delft (Netherlands)
2011-07-01
A computational fluid dynamics model with anisotropic mesh adaptivity is used to investigate coolant flow and heat transfer in pebble bed reactors. A novel method for implicitly incorporating solid boundaries based on multi-fluid flow modelling is adopted. The resulting model is able to resolve and simulate flow and heat transfer in randomly packed beds, regardless of the actual geometry, starting off with arbitrarily coarse meshes. The model is initially evaluated using an orderly stacked square channel of channel-height-to-particle diameter ratio of unity for a range of Reynolds numbers. The model is then applied to the face-centred cubical geometry. Coolant flow and heat transfer patterns are investigated. (author)
A testing preocedure for the evaluation of directional mesh bias
Slobbe, A.T.; Hendriks, M.A.N.; Rots, J.G.
2013-01-01
This paper presents a dedicated numerical test that enables to assess the directional mesh bias of constitutive models in a systematic way. The test makes use of periodic boundary conditions, by which strain localization can be analyzed for different mesh alignments with preservation of mesh uniform
Multiphase flow of immiscible fluids on unstructured moving meshes
DEFF Research Database (Denmark)
Misztal, Marek Krzysztof; Erleben, Kenny; Bargteil, Adam
2012-01-01
In this paper, we present a method for animating multiphase flow of immiscible fluids using unstructured moving meshes. Our underlying discretization is an unstructured tetrahedral mesh, the deformable simplicial complex (DSC), that moves with the flow in a Lagrangian manner. Mesh optimization op...
21 CFR 870.3650 - Pacemaker polymeric mesh bag.
2010-04-01
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Pacemaker polymeric mesh bag. 870.3650 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3650 Pacemaker polymeric mesh bag. (a) Identification. A pacemaker polymeric mesh bag is an implanted device used to hold a...
Three wafer stacking for 3D integration.
Energy Technology Data Exchange (ETDEWEB)
Greth, K. Douglas; Ford, Christine L.; Lantz, Jeffrey W.; Shinde, Subhash L.; Timon, Robert P.; Bauer, Todd M.; Hetherington, Dale Laird; Sanchez, Carlos Anthony
2011-11-01
Vertical wafer stacking will enable a wide variety of new system architectures by enabling the integration of dissimilar technologies in one small form factor package. With this LDRD, we explored the combination of processes and integration techniques required to achieve stacking of three or more layers. The specific topics that we investigated include design and layout of a reticle set for use as a process development vehicle, through silicon via formation, bonding media, wafer thinning, dielectric deposition for via isolation on the wafer backside, and pad formation.
Study of stacked microstrip phased arrays
Arts, M. J.; Smolders, A. B.
1993-06-01
Two theoretical methods for studying stacked-patch microstrip phased arrays are compared: (1) the element-by-element approach (finite array approach) of Pozar (1986) and Smolders (1992); and (2) the infinite approach of Pozar and Shaubert (1984) and Liu et al. (1988). Both theories were found to give almost the same results for a 7 x 7 stacked microstrip antenna, except for edge array elements and for large scan angles. Edge array elements could only be analyzed properly by using a finite array approach. Coupling measurements were made on a 7 x 7 array with a single patch layer, and the results agreed well with calculations.
Three wafer stacking for 3D integration.
Energy Technology Data Exchange (ETDEWEB)
Greth, K. Douglas; Ford, Christine L.; Lantz, Jeffrey W.; Shinde, Subhash L.; Timon, Robert P.; Bauer, Todd M.; Hetherington, Dale Laird; Sanchez, Carlos Anthony
2011-11-01
Vertical wafer stacking will enable a wide variety of new system architectures by enabling the integration of dissimilar technologies in one small form factor package. With this LDRD, we explored the combination of processes and integration techniques required to achieve stacking of three or more layers. The specific topics that we investigated include design and layout of a reticle set for use as a process development vehicle, through silicon via formation, bonding media, wafer thinning, dielectric deposition for via isolation on the wafer backside, and pad formation.
Geometry and kinematics of experimental antiformal stacks
Directory of Open Access Journals (Sweden)
CAROLINE JANETTE SOUZA GOMES
2000-06-01
Full Text Available Sandbox experiments with different boundary conditions demonstrate that antiformal stacks result from a forward-breaking thrust sequence. An obstacle blocks forward thrust propagation and transfers the deformation back to the hinterland in a previously formed true duplex. In the hinterland, continued shortening causes faults to merge toward the tectonic transport direction until the older thrusts override the younger thrusts. In experiments using thin sand layers or high basal friction, shortening is accommodated by a cyclic process of thrusting, back rotation of the newly formed thrust combined with strong vertical strain, and nucleation of a new thrust. Continuous deformation produces an antiformal stack through progressive convergence of branch lines.
A new class of accurate, mesh-free hydrodynamic simulation methods
Hopkins, Philip F.
2015-06-01
We present two new Lagrangian methods for hydrodynamics, in a systematic comparison with moving-mesh, smoothed particle hydrodynamics (SPH), and stationary (non-moving) grid methods. The new methods are designed to simultaneously capture advantages of both SPH and grid-based/adaptive mesh refinement (AMR) schemes. They are based on a kernel discretization of the volume coupled to a high-order matrix gradient estimator and a Riemann solver acting over the volume `overlap'. We implement and test a parallel, second-order version of the method with self-gravity and cosmological integration, in the code GIZMO:1 this maintains exact mass, energy and momentum conservation; exhibits superior angular momentum conservation compared to all other methods we study; does not require `artificial diffusion' terms; and allows the fluid elements to move with the flow, so resolution is automatically adaptive. We consider a large suite of test problems, and find that on all problems the new methods appear competitive with moving-mesh schemes, with some advantages (particularly in angular momentum conservation), at the cost of enhanced noise. The new methods have many advantages versus SPH: proper convergence, good capturing of fluid-mixing instabilities, dramatically reduced `particle noise' and numerical viscosity, more accurate sub-sonic flow evolution, and sharp shock-capturing. Advantages versus non-moving meshes include: automatic adaptivity, dramatically reduced advection errors and numerical overmixing, velocity-independent errors, accurate coupling to gravity, good angular momentum conservation and elimination of `grid alignment' effects. We can, for example, follow hundreds of orbits of gaseous discs, while AMR and SPH methods break down in a few orbits. However, fixed meshes minimize `grid noise'. These differences are important for a range of astrophysical problems.
To mesh or not to mesh: a review of pelvic organ reconstructive surgery
Directory of Open Access Journals (Sweden)
Dällenbach P
2015-04-01
Full Text Available Patrick Dällenbach Department of Gynecology and Obstetrics, Division of Gynecology, Urogynecology Unit, Geneva University Hospitals, Geneva, Switzerland Abstract: Pelvic organ prolapse (POP is a major health issue with a lifetime risk of undergoing at least one surgical intervention estimated at close to 10%. In the 1990s, the risk of reoperation after primary standard vaginal procedure was estimated to be as high as 30% to 50%. In order to reduce the risk of relapse, gynecological surgeons started to use mesh implants in pelvic organ reconstructive surgery with the emergence of new complications. Recent studies have nevertheless shown that the risk of POP recurrence requiring reoperation is lower than previously estimated, being closer to 10% rather than 30%. The development of mesh surgery – actively promoted by the marketing industry – was tremendous during the past decade, and preceded any studies supporting its benefit for our patients. Randomized trials comparing the use of mesh to native tissue repair in POP surgery have now shown better anatomical but similar functional outcomes, and meshes are associated with more complications, in particular for transvaginal mesh implants. POP is not a life-threatening condition, but a functional problem that impairs quality of life for women. The old adage “primum non nocere” is particularly appropriate when dealing with this condition which requires no treatment when asymptomatic. It is currently admitted that a certain degree of POP is physiological with aging when situated above the landmark of the hymen. Treatment should be individualized and the use of mesh needs to be selective and appropriate. Mesh implants are probably an important tool in pelvic reconstructive surgery, but the ideal implant has yet to be found. The indications for its use still require caution and discernment. This review explores the reasons behind the introduction of mesh augmentation in POP surgery, and aims to
When is Stacking Confusing?: The Impact of Confusion on Stacking in Deep HI Galaxy Surveys
Jones, Michael G; Giovanelli, Riccardo; Papastergis, Emmanouil
2015-01-01
We present an analytic model to predict the HI mass contributed by confused sources to a stacked spectrum in a generic HI survey. Based on the ALFALFA correlation function, this model is in agreement with the estimates of confusion present in stacked Parkes telescope data, and was used to predict how confusion will limit stacking in the deepest SKA-precursor HI surveys. Stacking with LADUMA and DINGO UDEEP data will only be mildly impacted by confusion if their target synthesised beam size of 10 arcsec can be achieved. Any beam size significantly above this will result in stacks that contain a mass in confused sources that is comparable to (or greater than) that which is detectable via stacking, at all redshifts. CHILES' 5 arcsec resolution is more than adequate to prevent confusion influencing stacking of its data, throughout its bandpass range. FAST will be the most impeded by confusion, with HI surveys likely becoming heavily confused much beyond z = 0.1. The largest uncertainties in our model are the reds...
Fade to Green: A Biodegradable Stack of Microbial Fuel Cells.
Winfield, Jonathan; Chambers, Lily D; Rossiter, Jonathan; Stinchcombe, Andrew; Walter, X Alexis; Greenman, John; Ieropoulos, Ioannis
2015-08-24
The focus of this study is the development of biodegradable microbial fuel cells (MFCs) able to produce useful power. Reactors with an 8 mL chamber volume were designed using all biodegradable products: polylactic acid for the frames, natural rubber as the cation-exchange membrane and egg-based, open-to-air cathodes coated with a lanolin gas diffusion layer. Forty MFCs were operated in various configurations. When fed with urine, the biodegradable stack was able to power appliances and was still operational after six months. One useful application for this truly sustainable MFC technology includes onboard power supplies for biodegradable robotic systems. After operation in remote ecological locations, these could degrade harmlessly into the surroundings to leave no trace when the mission is complete.
Full scale phosphoric acid fuel cell stack technology development
Christner, L.; Faroque, M.
1984-01-01
The technology development for phosphoric acid fuel cells is summarized. The preparation, heat treatment, and characterization of carbon composites used as bipolar separator plates are described. Characterization included resistivity, porosity, and electrochemical corrosion. High density glassy carbon/graphite composites performed well in long-term fuel cell endurance tests. Platinum alloy cathode catalysts and low-loaded platinum electrodes were evaluated in 25 sq cm cells. Although the alloys displayed an initial improvement, some of this improvement diminished after a few thousand hours of testing. Low platinum loading (0.12 mg/sq cm anodes and 0.3 mg/sq cm cathodes) performed nearly as well as twice this loading. A selectively wetproofed anode backing paper was tested in a 5 by 15 inch three-cell stack. This material may provide for acid volume expansion, acid storage, and acid lateral distribution.
Energy Technology Data Exchange (ETDEWEB)
Wen, Chih-Yung; Lin, Yu-Sheng; Lu, Chien-Heng [Department of Aeronautics and Astronautics, National Cheng-Kung University, Tainan 70101 (China)
2009-04-15
This work experimentally investigates the effects of the pyrolytic graphite sheets (PGS) on the performance and thermal management of a proton exchange membrane fuel cell (PEMFC) stack. These PGS with the features of light weight and high thermal conductivity serve as heat spreaders in the fuel cell stack for the first time to reduce the volume and weight of cooling systems, and homogenizes the temperature in the reaction areas. A PEMFC stack with an active area of 100 cm{sup 2} and 10 cells in series is constructed and used in this research. Five PGS of thickness 0.1 mm are cut into the shape of flow channels and bound to the central five cathode gas channel plates. Four thermocouples are embedded on the cathode gas channel plates to estimate the temperature variation in the stack. It is shown that the maximum power of the stack increase more than 15% with PGS attached. PGS improve the stack performance and alleviate the flooding problem at low cathode flow rates significantly. Results of this study demonstrate the feasibility of application of PGS to the thermal management of a small-to-medium-sized fuel cell stack. (author)
Aliyazicioglu, Tolga; Yalti, Tunc; Kabaoglu, Burcak
2017-08-01
Approximately one fifth of patients suffer from inguinal pain after laparoscopic total extraperitoneal (TEP) inguinal hernia repair. There is existing literature suggesting that the staples used to fix the mesh can cause postoperative inguinal pain. In this study, we describe our experience with laparoscopic TEP inguinal hernia surgery using 3-dimensional mesh without mesh fixation, in our institution. A total of 300 patients who had undergone laparoscopic TEP inguinal hernia repair with 3-dimensional mesh in VKV American Hospital, Istanbul from November 2006 to November 2015 were studied retrospectively. Using the hospital's electronic archive, we studied patients' selected parameters, which are demographic features (age, sex), body mass index, hernia locations and types, duration of operations, preoperative and postoperative complications, duration of hospital stays, cost of surgery, need for analgesics, time elapsed until returning to daily activities and work. A total of 300 patients underwent laparoscopic TEP hernia repair of 437 inguinal hernias from November 2006 to November 2015. Of the 185 patients, 140 were symptomatic. Mean duration of follow-up was 48 months (range, 6 to 104 mo). The mean duration of surgery was 55 minutes for bilateral hernia repair, and 38 minutes for unilateral hernia repair. The mean duration of hospital stay was 0.9 day. There was no conversion to open surgery. In none of the cases the mesh was fixated with either staples or fibrin glue. Six patients (2%) developed seroma that were treated conservatively. One patient had inguinal hernia recurrence. One patient had preperitoneal hematoma. One patient operated due to indirect right-sided hernia developed right-sided hydrocele. One patient had wound dehiscence at the umbilical port entry site. Chronic pain developed postoperatively in 1 patient. Ileus developed in 1 patient. Laparoscopic TEP inguinal repair with 3-dimensional mesh without mesh fixation can be performed as safe as
Meshed split skin graft for extensive vitiligo
Directory of Open Access Journals (Sweden)
Srinivas C
2004-05-01
Full Text Available A 30 year old female presented with generalized stable vitiligo involving large areas of the body. Since large areas were to be treated it was decided to do meshed split skin graft. A phototoxic blister over recipient site was induced by applying 8 MOP solution followed by exposure to UVA. The split skin graft was harvested from donor area by Padgett dermatome which was meshed by an ampligreffe to increase the size of the graft by 4 times. Significant pigmentation of the depigmented skin was seen after 5 months. This procedure helps to cover large recipient areas, when pigmented donor skin is limited with minimal risk of scarring. Phototoxic blister enables easy separation of epidermis thus saving time required for dermabrasion from recipient site.
Variational mesh segmentation via quadric surface fitting
Yan, Dongming
2012-11-01
We present a new variational method for mesh segmentation by fitting quadric surfaces. Each component of the resulting segmentation is represented by a general quadric surface (including plane as a special case). A novel energy function is defined to evaluate the quality of the segmentation, which combines both L2 and L2 ,1 metrics from a triangle to a quadric surface. The Lloyd iteration is used to minimize the energy function, which repeatedly interleaves between mesh partition and quadric surface fitting. We also integrate feature-based and simplification-based techniques in the segmentation framework, which greatly improve the performance. The advantages of our algorithm are demonstrated by comparing with the state-of-the-art methods. © 2012 Elsevier Ltd. All rights reserved.
Capacity estimation of wireless mesh networks
2005-01-01
Resumo: Este trabalho apresenta uma estimação da capacidade das redes sem fio tipo Mesh. As redes deste tipo têm topologias e padrões de tráfego únicos que as diferenciam das redes sem fio convencionais. Nas redes sem fio tipo mesh os nós atuam como clientes e como servidores e o tráfego e encaminhado para uma ou várias gateways em um modo multi-salto. A estimação da capacidade é baseada em estudos da Camada Física e MAC. Efeitos da propagação do canal são avaliados Abstract: This work add...
Nondispersive optical activity of meshed helical metamaterials.
Park, Hyun Sung; Kim, Teun-Teun; Kim, Hyeon-Don; Kim, Kyungjin; Min, Bumki
2014-11-17
Extreme optical properties can be realized by the strong resonant response of metamaterials consisting of subwavelength-scale metallic resonators. However, highly dispersive optical properties resulting from strong resonances have impeded the broadband operation required for frequency-independent optical components or devices. Here we demonstrate that strong, flat broadband optical activity with high transparency can be obtained with meshed helical metamaterials in which metallic helical structures are networked and arranged to have fourfold rotational symmetry around the propagation axis. This nondispersive optical activity originates from the Drude-like response as well as the fourfold rotational symmetry of the meshed helical metamaterials. The theoretical concept is validated in a microwave experiment in which flat broadband optical activity with a designed magnitude of 45° per layer of metamaterial is measured. The broadband capabilities of chiral metamaterials may provide opportunities in the design of various broadband optical systems and applications.
Energy-efficient wireless mesh networks
CSIR Research Space (South Africa)
Ntlatlapa, N
2007-06-01
Full Text Available deficient areas such as rural areas in Africa. Index Terms—Energy efficient design, Wireless Mesh networks, Network Protocols I. INTRODUCTION The objectives of this research group are the application and adaptation of existing wireless local area... networks, especially those based on 802.11 standard, for the energyefficient wireless mesh network (EEWMN) architectures, protocols and controls. In addition to the WMN regular features of self...
Adaptive upscaling with the dual mesh method
Energy Technology Data Exchange (ETDEWEB)
Guerillot, D.; Verdiere, S.
1997-08-01
The objective of this paper is to demonstrate that upscaling should be calculated during the flow simulation instead of trying to enhance the a priori upscaling methods. Hence, counter-examples are given to motivate our approach, the so-called Dual Mesh Method. The main steps of this numerical algorithm are recalled. Applications illustrate the necessity to consider different average relative permeability values depending on the direction in space. Moreover, these values could be different for the same average saturation. This proves that an a priori upscaling cannot be the answer even in homogeneous cases because of the {open_quotes}dynamical heterogeneity{close_quotes} created by the saturation profile. Other examples show the efficiency of the Dual Mesh Method applied to heterogeneous medium and to an actual field case in South America.
Gamra: Simple Meshes for Complex Earthquakes
Landry, Walter
2016-01-01
The static offsets caused by earthquakes are well described by elastostatic models with a discontinuity in the displacement along the fault. A traditional approach to model this discontinuity is to align the numerical mesh with the fault and solve the equations using finite elements. However, this distorted mesh can be difficult to generate and update. We present a new numerical method, inspired by the Immersed Interface Method, for solving the elastostatic equations with embedded discontinuities. This method has been carefully designed so that it can be used on parallel machines on an adapted finite difference grid. We have implemented this method in Gamra, a new code for earth modelling. We demonstrate the correctness of the method with analytic tests, and we demonstrate its practical performance by solving a realistic earthquake model to extremely high precision.
Electrostatic PIC with adaptive Cartesian mesh
Kolobov, Vladimir I
2016-01-01
We describe an initial implementation of an electrostatic Particle-in-Cell (ES-PIC) module with adaptive Cartesian mesh in our Unified Flow Solver framework. Challenges of PIC method with cell-based adaptive mesh refinement (AMR) are related to a decrease of the particle-per-cell number in the refined cells with a corresponding increase of the numerical noise. The developed ES-PIC solver is validated for capacitively coupled plasma, its AMR capabilities are demonstrated for simulations of streamer development during high-pressure gas breakdown. It is shown that cell-based AMR provides a convenient particle management algorithm for exponential multiplications of electrons and ions in the ionization events.
Mesh convergence study for hydraulic turbine draft-tube
Devals, C.; Vu, T. C.; Zhang, Y.; Dompierre, J.; Guibault, F.
2016-11-01
Computational flow analysis is an essential tool for hydraulic turbine designers. Grid generation is the first step in the flow analysis process. Grid quality and solution accuracy are strongly linked. Even though many studies have addressed the issue of mesh independence, there is still no definitive consensus on mesh best practices, and research on that topic is still needed. This paper presents a mesh convergence study for turbulence flow in hydraulic turbine draft- tubes which represents the most challenging turbine component for CFD predictions. The findings from this parametric study will be incorporated as mesh control rules in an in-house automatic mesh generator for turbine components.
Overlay Share Mesh for Interactive Group Communication with High Dynamic
Institute of Scientific and Technical Information of China (English)
WU Yan-hua; CAI Yun-ze; XU Xiao-ming
2007-01-01
An overlay share mesh infrastructure is presented for high dynamic group communication systems, such as distributed interactive simulation (DIS) and distributed virtual environments (DVE). Overlay share mesh infrastructure can own better adapting ability for high dynamic group than tradition multi-tree multicast infrastructure by sharing links among different groups. The mechanism of overlay share mesh based on area of interest (AOI) was discussed in detail in this paper. A large number of simulation experiments were done and the permance of mesh infrastructure was studied. Experiments results proved that overlay mesh infrastructure owns better adaptability than traditional multi-tree infrastructure for high dynamic group communication systems.
Diffusive mesh relaxation in ALE finite element numerical simulations
Energy Technology Data Exchange (ETDEWEB)
Dube, E.I.
1996-06-01
The theory for a diffusive mesh relaxation algorithm is developed for use in three-dimensional Arbitary Lagrange/Eulerian (ALE) finite element simulation techniques. This mesh relaxer is derived by a variational principle for an unstructured 3D grid using finite elements, and incorporates hourglass controls in the numerical implementation. The diffusive coefficients are based on the geometric properties of the existing mesh, and are chosen so as to allow for a smooth grid that retains the general shape of the original mesh. The diffusive mesh relaxation algorithm is then applied to an ALE code system, and results from several test cases are discussed.
Effects of mesh resolution on hypersonic heating prediction
Institute of Scientific and Technical Information of China (English)
无
2011-01-01
Aeroheating prediction is a challenging and critical problem for the design and optimization of hypersonic vehicles.One challenge is that the solution of the Navier-Stokes equations strongly depends on the computational mesh.In this letter,the effect of mesh resolution on heat flux prediction is studied.It is found that mesh-independent solutions can be obtained using fine mesh,whose accuracy is confirmed by results from kinetic particle simulation.It is analyzed that mesh-induced numerical error comes m...
Flux interactions on stacked Josephson junctions
DEFF Research Database (Denmark)
Scott, Alwyn C.; A., Petraglia
1996-01-01
Perturbation methods are used to study the dynamics of locked fluxon modes on stacked Josephson junctions and single crystals of certain high-T-c, superconductors. Two limiting cases are considered: (i) The nonlinear diffusion regime in which fluxon dynamics are dominated by energy exchange betwe...
Average Transmission Probability of a Random Stack
Lu, Yin; Miniatura, Christian; Englert, Berthold-Georg
2010-01-01
The transmission through a stack of identical slabs that are separated by gaps with random widths is usually treated by calculating the average of the logarithm of the transmission probability. We show how to calculate the average of the transmission probability itself with the aid of a recurrence relation and derive analytical upper and lower…
Venturis as silencers in a BOF stack
Energy Technology Data Exchange (ETDEWEB)
Kelsall, T.; Gerritsen, T. [Hatch Associates Ltd., Mississauga, Ontario (Canada). Acoustics and Noise Control Dept.; Landon, T. [Wheeling-Pittsburgh Steel Corp., Steubenville, OH (United States)
1995-06-01
Installation of a venture in a BOF stack reduced the sound level in a local community by 10 to 15 db. This application resulted in the development of a new type of fan silencer, called the modal silencer, having the inherent advantages of low pressure drop and less maintenance compared with conventional types.
Measuring Structural Parameters Through Stacking Galaxy Images
Li, Yubin; Gu, Qiu-Sheng; Wang, Yi-Peng; Wen, ZhangZheng; Guo, Kexin; An, FangXia
2016-01-01
It remains challenging to detect the low surface brightness structures of faint high-z galaxies, which is key to understanding the structural evolution of galaxies. The technique of image stacking allows us to measure the averaged light profile beneath the detection limit and probe the extended structure of a group of galaxies. We carry out simulations to examine the recovery of the averaged surface brightness profile through stacking model HST/ACS images of a set of galaxies as functions of Sersic index (n), effective radius (Re) and axis ratio (AR). The Sersic profile best fitting the radial profile of the stacked image is taken as the recovered profile, in comparison with the intrinsic mean profile of the model galaxies. Our results show that, in general, the structural parameters of the mean profile can be properly determined through stacking, although systematic biases need to be corrected when spreads of Re and AR are counted. We find that Sersic index is slightly overestimated and Re is underestimated ...
OpenStack cloud computing cookbook
Jackson, Kevin
2013-01-01
A Cookbook full of practical and applicable recipes that will enable you to use the full capabilities of OpenStack like never before.This book is aimed at system administrators and technical architects moving from a virtualized environment to cloud environments with familiarity of cloud computing platforms. Knowledge of virtualization and managing linux environments is expected.
40 CFR 61.33 - Stack sampling.
2010-07-01
... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Stack sampling. 61.33 Section 61.33 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL... sampling. (a) Unless a waiver of emission testing is obtained under § 61.13, each owner or...
40 CFR 61.53 - Stack sampling.
2010-07-01
... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Stack sampling. 61.53 Section 61.53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL... sampling. (a) Mercury ore processing facility. (1) Unless a waiver of emission testing is obtained...
Scaling the CERN OpenStack cloud
Bell, T.; Bompastor, B.; Bukowiec, S.; Castro Leon, J.; Denis, M. K.; van Eldik, J.; Fermin Lobo, M.; Fernandez Alvarez, L.; Fernandez Rodriguez, D.; Marino, A.; Moreira, B.; Noel, B.; Oulevey, T.; Takase, W.; Wiebalck, A.; Zilli, S.
2015-12-01
CERN has been running a production OpenStack cloud since July 2013 to support physics computing and infrastructure services for the site. In the past year, CERN Cloud Infrastructure has seen a constant increase in nodes, virtual machines, users and projects. This paper will present what has been done in order to make the CERN cloud infrastructure scale out.
OpenStack Object Storage (Swift) essentials
Kapadia, Amar; Varma, Sreedhar
2015-01-01
If you are an IT administrator and you want to enter the world of cloud storage using OpenStack Swift, then this book is ideal for you. Basic knowledge of Linux and server technology is beneficial to get the most out of the book.
Average Transmission Probability of a Random Stack
Lu, Yin; Miniatura, Christian; Englert, Berthold-Georg
2010-01-01
The transmission through a stack of identical slabs that are separated by gaps with random widths is usually treated by calculating the average of the logarithm of the transmission probability. We show how to calculate the average of the transmission probability itself with the aid of a recurrence relation and derive analytical upper and lower…
Wireless experiments on a Motorola mesh testbed.
Energy Technology Data Exchange (ETDEWEB)
Riblett, Loren E., Jr.; Wiseman, James M.; Witzke, Edward L.
2010-06-01
Motomesh is a Motorola product that performs mesh networking at both the client and access point levels and allows broadband mobile data connections with or between clients moving at vehicular speeds. Sandia National aboratories has extensive experience with this product and its predecessors in infrastructure-less mobile environments. This report documents experiments, which characterize certain aspects of how the Motomesh network performs when obile units are added to a fixed network infrastructure.
Airbag Mapped Mesh Auto-Flattening Method
Institute of Scientific and Technical Information of China (English)
ZHANG Jinhuan; MA Chunsheng; BAI Yuanli; HUANG Shilin
2005-01-01
Current software cannot easily model an airbag to be flattened without wrinkles. This paper improves the modeling efficiency using the initial metric method to design a mapped mesh auto-flattening algorithm. The element geometric transformation matrix was obtained using the theory of computer graphics. The algorithm proved to be practical for modeling a passenger-side airbag model. The efficiency and precision of modeling airbags are greatly improved by this method.
Solid Mesh Registration for Radiotherapy Treatment Planning
DEFF Research Database (Denmark)
Noe, Karsten Østergaard; Sørensen, Thomas Sangild
2010-01-01
We present an algorithm for solid organ registration of pre-segmented data represented as tetrahedral meshes. Registration of the organ surface is driven by force terms based on a distance field representation of the source and reference shapes. Registration of internal morphology is achieved usi...... to complete. The proposed method has many potential uses in image guided radiotherapy (IGRT) which relies on registration to account for organ deformation between treatment sessions....
Performance Evaluation of Coded Meshed Networks
DEFF Research Database (Denmark)
Krigslund, Jeppe; Hansen, Jonas; Pedersen, Morten Videbæk
2013-01-01
of the former to enhance the gains of the latter. We first motivate our work through measurements in WiFi mesh networks. Later, we compare state-of-the-art approaches, e.g., COPE, RLNC, to CORE. Our measurements show the higher reliability and throughput of CORE over other schemes, especially, for asymmetric...... and/or high loss probabilities. We show that a store and forward scheme outperforms COPE under some channel conditions, while CORE yields 3dB gains....
Incremental approach for radial basis functions mesh deformation with greedy algorithm
Selim, Mohamed M.; Koomullil, Roy P.; Shehata, Ahmed S.
2017-07-01
Mesh Deformation is an important element of any fluid-structure interaction simulation. In this article, a new methodology is presented for the deformation of volume meshes using incremental radial basis function (RBF) based interpolation. A greedy algorithm is used to select a small subset of the surface nodes iteratively. Two incremental approaches are introduced to solve the RBF system of equations: 1) block matrix inversion based approach and 2) modified LU decomposition approach. The use of incremental approach decreased the computational complexity of solving the system of equations within each greedy algorithm's iteration from O (n3) to O (n2). Results are presented from an accuracy study using specified deformations on a 2D surface. Mesh deformations for bending and twisting of a 3D rectangular supercritical wing have been demonstrated. Outcomes showed the incremental approaches reduce the CPU time up to 67% as compared to a traditional RBF matrix solver. Finally, the proposed mesh deformation approach was integrated within a fluid-structure interaction solver for investigating a flow induced cantilever beam vibration.
Earth As An Unstructured Mesh and Its Recovery from Seismic Waveform Data
De Hoop, M. V.
2015-12-01
We consider multi-scale representations of Earth's interior from thepoint of view of their possible recovery from multi- andhigh-frequency seismic waveform data. These representations areintrinsically connected to (geologic, tectonic) structures, that is,geometric parametrizations of Earth's interior. Indeed, we address theconstruction and recovery of such parametrizations using localiterative methods with appropriately designed data misfits andguaranteed convergence. The geometric parametrizations containinterior boundaries (defining, for example, faults, salt bodies,tectonic blocks, slabs) which can, in principle, be obtained fromsuccessive segmentation. We make use of unstructured meshes. For the adaptation and recovery of an unstructured mesh we introducean energy functional which is derived from the Hausdorff distance. Viaan augmented Lagrangian method, we incorporate the mentioned datamisfit. The recovery is constrained by shape optimization of theinterior boundaries, and is reminiscent of Hausdorff warping. We useelastic deformation via finite elements as a regularization whilefollowing a two-step procedure. The first step is an update determinedby the energy functional; in the second step, we modify the outcome ofthe first step where necessary to ensure that the new mesh isregular. This modification entails an array of techniques includingtopology correction involving interior boundary contacting andbreakup, edge warping and edge removal. We implement this as afeed-back mechanism from volume to interior boundary meshesoptimization. We invoke and apply a criterion of mesh quality controlfor coarsening, and for dynamical local multi-scale refinement. Wepresent a novel (fluid-solid) numerical framework based on theDiscontinuous Galerkin method.
Greene, Patrick; Schofield, Sam; Nourgaliev, Robert
2016-11-01
A new mesh smoothing method designed to cluster cells near a dynamically evolving interface is presented. The method is based on weighted condition number mesh relaxation with the weight function being computed from a level set representation of the interface. The weight function is expressed as a Taylor series based discontinuous Galerkin (DG) projection, which makes the computation of the derivatives of the weight function needed during the condition number optimization process a trivial matter. For cases when a level set is not available, a fast method for generating a low-order level set from discrete cell-centered fields, such as a volume fraction or index function, is provided. Results show that the low-order level set works equally well for the weight function as the actual level set. The method retains the excellent smoothing capabilities of condition number relaxation, while providing a method for clustering mesh cells near regions of interest. Dynamic cases for moving interfaces are presented to demonstrate the method's potential usefulness as a mesh relaxer for arbitrary Lagrangian Eulerian (ALE) methods. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.
Acoustic performance of mesh compression paddles for a multimodality breast imaging system.
LeCarpentier, Gerald L; Goodsitt, Mitchell M; Verweij, Sacha; Li, Jie; Padilla, Frederic R; Carson, Paul L
2014-07-01
A system incorporating automated 3-D ultrasound and digital X-ray tomosynthesis is being developed for improved breast lesion detection and characterization. The goal of this work is to develop and test candidates for a dual-modality mesh compression paddle. A Computerized Imaging Reference Systems (Norfork, VA, USA) ultrasound phantom with tilted low-contrast cylindrical objects was used. Polyester mesh fabrics (1- and 2-mm spacing), a high-density polyethylene filament grid (Dyneema, DSM Dyneema, Stanley, NC, USA) and a solid polymethylpentene (TPX; Mitsui Plastics, Inc., White Plains, NY) paddle were compared with no overlying structures using a GE Logic 9 with M12L transducer. A viscous gel provided coupling. The phantom was scanned 10 times over 9 cm for each configuration. Image volumes were analyzed for signal strength, contrast and contrast-to-noise ratio. X-ray tests confirmed X-ray transparency for all materials. By all measures, both mesh fabrics outperformed TPX and Dyneema, and there were essentially no differences between 2-mm mesh and unobstructed configurations.
Particle Mesh Hydrodynamics for Astrophysics Simulations
Chatelain, Philippe; Cottet, Georges-Henri; Koumoutsakos, Petros
We present a particle method for the simulation of three dimensional compressible hydrodynamics based on a hybrid Particle-Mesh discretization of the governing equations. The method is rooted on the regularization of particle locations as in remeshed Smoothed Particle Hydrodynamics (rSPH). The rSPH method was recently introduced to remedy problems associated with the distortion of computational elements in SPH, by periodically re-initializing the particle positions and by using high order interpolation kernels. In the PMH formulation, the particles solely handle the convective part of the compressible Euler equations. The particle quantities are then interpolated onto a mesh, where the pressure terms are computed. PMH, like SPH, is free of the convection CFL condition while at the same time it is more efficient as derivatives are computed on a mesh rather than particle-particle interactions. PMH does not detract from the adaptive character of SPH and allows for control of its accuracy. We present simulations of a benchmark astrophysics problem demonstrating the capabilities of this approach.
Mesh Learning for Classifying Cognitive Processes
Ozay, Mete; Öztekin, Uygar; Vural, Fatos T Yarman
2012-01-01
The major goal of this study is to model the encoding and retrieval operations of the brain during memory processing, using statistical learning tools. The suggested method assumes that the memory encoding and retrieval processes can be represented by a supervised learning system, which is trained by the brain data collected from the functional Magnetic Resonance (fMRI) measurements, during the encoding stage. Then, the system outputs the same class labels as that of the fMRI data collected during the retrieval stage. The most challenging problem of modeling such a learning system is the design of the interactions among the voxels to extract the information about the underlying patterns of brain activity. In this study, we suggest a new method called Mesh Learning, which represents each voxel by a mesh of voxels in a neighborhood system. The nodes of the mesh are a set of neighboring voxels, whereas the arc weights are estimated by a linear regression model. The estimated arc weights are used to form Local Re...
Parallel object-oriented adaptive mesh refinement
Energy Technology Data Exchange (ETDEWEB)
Balsara, D.; Quinlan, D.J.
1997-04-01
In this paper we study adaptive mesh refinement (AMR) for elliptic and hyperbolic systems. We use the Asynchronous Fast Adaptive Composite Grid Method (AFACX), a parallel algorithm based upon the of Fast Adaptive Composite Grid Method (FAC) as a test case of an adaptive elliptic solver. For our hyperbolic system example we use TVD and ENO schemes for solving the Euler and MHD equations. We use the structured grid load balancer MLB as a tool for obtaining a load balanced distribution in a parallel environment. Parallel adaptive mesh refinement poses difficulties in expressing both the basic single grid solver, whether elliptic or hyperbolic, in a fashion that parallelizes seamlessly. It also requires that these basic solvers work together within the adaptive mesh refinement algorithm which uses the single grid solvers as one part of its adaptive solution process. We show that use of AMR++, an object-oriented library within the OVERTURE Framework, simplifies the development of AMR applications. Parallel support is provided and abstracted through the use of the P++ parallel array class.
Mesh deployable antenna mechanics testing method
Jiang, Li
Rapid development in spatial technologies and continuous expansion of astronautics applications require stricter and stricter standards in spatial structure. Deployable space structure as a newly invented structural form is being extensively adopted because of its characteristic (i.e. deployability). Deployable mesh reflector antenna is a kind of common deployable antennas. Its reflector consists in a kind of metal mesh. Its electrical properties are highly dependent on its mechanics parameters (including surface accuracy, angle, and position). Therefore, these mechanics parameters have to be calibrated. This paper presents a mesh antenna mechanics testing method that employs both an electronic theodolite and a laser tracker. The laser tracker is firstly used to measure the shape of radial rib deployable antenna. The measurement data are then fitted to a paraboloid by means of error compensation. Accordingly, the focus and the focal axis of the paraboloid are obtained. The following step is to synchronize the coordinate systems of the electronic theodolite and the measured antenna. Finally, in a microwave anechoic chamber environment, the electromechanical axis is calibrated. Testing results verify the effectiveness of the presented method.
MeSH Now: automatic MeSH indexing at PubMed scale via learning to rank.
Mao, Yuqing; Lu, Zhiyong
2017-04-17
MeSH indexing is the task of assigning relevant MeSH terms based on a manual reading of scholarly publications by human indexers. The task is highly important for improving literature retrieval and many other scientific investigations in biomedical research. Unfortunately, given its manual nature, the process of MeSH indexing is both time-consuming (new articles are not immediately indexed until 2 or 3 months later) and costly (approximately ten dollars per article). In response, automatic indexing by computers has been previously proposed and attempted but remains challenging. In order to advance the state of the art in automatic MeSH indexing, a community-wide shared task called BioASQ was recently organized. We propose MeSH Now, an integrated approach that first uses multiple strategies to generate a combined list of candidate MeSH terms for a target article. Through a novel learning-to-rank framework, MeSH Now then ranks the list of candidate terms based on their relevance to the target article. Finally, MeSH Now selects the highest-ranked MeSH terms via a post-processing module. We assessed MeSH Now on two separate benchmarking datasets using traditional precision, recall and F1-score metrics. In both evaluations, MeSH Now consistently achieved over 0.60 in F-score, ranging from 0.610 to 0.612. Furthermore, additional experiments show that MeSH Now can be optimized by parallel computing in order to process MEDLINE documents on a large scale. We conclude that MeSH Now is a robust approach with state-of-the-art performance for automatic MeSH indexing and that MeSH Now is capable of processing PubMed scale documents within a reasonable time frame. http://www.ncbi.nlm.nih.gov/CBBresearch/Lu/Demo/MeSHNow/ .
Data-Parallel Mesh Connected Components Labeling and Analysis
Energy Technology Data Exchange (ETDEWEB)
Harrison, Cyrus; Childs, Hank; Gaither, Kelly
2011-04-10
We present a data-parallel algorithm for identifying and labeling the connected sub-meshes within a domain-decomposed 3D mesh. The identification task is challenging in a distributed-memory parallel setting because connectivity is transitive and the cells composing each sub-mesh may span many or all processors. Our algorithm employs a multi-stage application of the Union-find algorithm and a spatial partitioning scheme to efficiently merge information across processors and produce a global labeling of connected sub-meshes. Marking each vertex with its corresponding sub-mesh label allows us to isolate mesh features based on topology, enabling new analysis capabilities. We briefly discuss two specific applications of the algorithm and present results from a weak scaling study. We demonstrate the algorithm at concurrency levels up to 2197 cores and analyze meshes containing up to 68 billion cells.
Data-Parallel Mesh Connected Components Labeling and Analysis
Energy Technology Data Exchange (ETDEWEB)
Harrison, Cyrus; Childs, Hank; Gaither, Kelly
2011-04-10
We present a data-parallel algorithm for identifying and labeling the connected sub-meshes within a domain-decomposed 3D mesh. The identification task is challenging in a distributed-memory parallel setting because connectivity is transitive and the cells composing each sub-mesh may span many or all processors. Our algorithm employs a multi-stage application of the Union-find algorithm and a spatial partitioning scheme to efficiently merge information across processors and produce a global labeling of connected sub-meshes. Marking each vertex with its corresponding sub-mesh label allows us to isolate mesh features based on topology, enabling new analysis capabilities. We briefly discuss two specific applications of the algorithm and present results from a weak scaling study. We demonstrate the algorithm at concurrency levels up to 2197 cores and analyze meshes containing up to 68 billion cells.
Grow, Jacob N; Butterworth, James; Petty, Paul
2017-01-01
Objective: This study seeks an alternative to acellular dermal matrix in 2-staged breast reconstruction while minimizing cost. It was hypothesized that use of a Gore DualMesh would allow for similar intraoperative tissue expander fill volumes, time to second-stage reconstruction, and number of postoperative fills compared with acellular dermal matrix at only a fraction of the expense. Methods: Retrospective analysis comparing Gore DualMesh (59 breasts, 34 patients), acellular dermal matrix (13 breasts, 8 patients), and total muscle coverage (25 breasts, 14 patients) for postmastectomy breast reconstruction was performed. Time to second-stage reconstruction, number of expansions, and relative initial fill volumes were compared between the 3 groups. Secondarily, complication rates were also considered, including seroma, infection, expander/implant explantation, removal of mesh, and capsular contracture. Statistical analysis was performed utilizing the Fisher exact test and the χ(2) test for categorical variables and the Mann-Whitney U test for continuous variables. Results: Relative initial fill volumes, number of expansions, and time to second-stage reconstruction showed no statistical difference between the acellular dermal matrix and Gore DualMesh groups (P = .494, P = .146, and P = .539, respectively). Furthermore, the Gore DualMesh group underwent significantly fewer fills (P Gore DualMesh represents a safe alternative to acellular dermal matrix for breast reconstruction with similar aesthetic results in certain patients at a fraction of the cost.
Energy Technology Data Exchange (ETDEWEB)
Lee, Gil-yong; Jung, Min-kyung; Ryoo, Sung-nam; Ha, Sam-chul [Digital Appliance R and D, LG Electronics, Seoul 153-801 (Korea, Republic of); Park, Myung-seok [LG Solar Energy, Seoul 150-721 (Korea, Republic of); Kim, Sunhoe [Department of New Energy and Resource Engineering, Sangji University, Wonju, Gangwon 220-702 (Korea, Republic of)
2010-12-15
In order to satisfy the demands of customers, cost innovation of fuel cell systems is required for the commercialization of the fuel cell. Since the stack is one of the most expensive parts in a fuel cell system, cost reduction of stack is required for fuel cell commercialization. For this effort stainless steel 304 sheets were etched for the flow field and then coated for corrosion resistance. This enables the development of highly cost-effective bipolar plates (BPs) for a Proton Exchange Membrane Fuel Cell (PEMFC) stack of a 1 kW-class for Residential Power Generator (RPG). LG Electronics (LGE) developed a metal stack of 64 cells with the developed BPs and achieved a performance rating of 0.75 V/cell at 200 mA/cm{sup 2}. LGE also achieved a stack volume reduction of 20% compared to a stack of the same specifications consisting of graphite material BPs. The volume decrease can be represented as a cost reduction. LGE achieved the very low cost innovation to 1 USD per cell with cells developed from etched metal BPs. LGE also achieved 500 h of operation with LGE's RPG system; this test is still ongoing. The degradation rate of the stack was 27 {mu}V/hr. The end of life of the stack was estimated at approximately 17,000 h. (author)
Oral, intestinal, and skin bacteria in ventral hernia mesh implants
Directory of Open Access Journals (Sweden)
Odd Langbach
2016-07-01
Full Text Available Background: In ventral hernia surgery, mesh implants are used to reduce recurrence. Infection after mesh implantation can be a problem and rates around 6–10% have been reported. Bacterial colonization of mesh implants in patients without clinical signs of infection has not been thoroughly investigated. Molecular techniques have proven effective in demonstrating bacterial diversity in various environments and are able to identify bacteria on a gene-specific level. Objective: The purpose of this study was to detect bacterial biofilm in mesh implants, analyze its bacterial diversity, and look for possible resemblance with bacterial biofilm from the periodontal pocket. Methods: Thirty patients referred to our hospital for recurrence after former ventral hernia mesh repair, were examined for periodontitis in advance of new surgical hernia repair. Oral examination included periapical radiographs, periodontal probing, and subgingival plaque collection. A piece of mesh (1×1 cm from the abdominal wall was harvested during the new surgical hernia repair and analyzed for bacteria by PCR and 16S rRNA gene sequencing. From patients with positive PCR mesh samples, subgingival plaque samples were analyzed with the same techniques. Results: A great variety of taxa were detected in 20 (66.7% mesh samples, including typical oral commensals and periodontopathogens, enterics, and skin bacteria. Mesh and periodontal bacteria were further analyzed for similarity in 16S rRNA gene sequences. In 17 sequences, the level of resemblance between mesh and subgingival bacterial colonization was 98–100% suggesting, but not proving, a transfer of oral bacteria to the mesh. Conclusion: The results show great bacterial diversity on mesh implants from the anterior abdominal wall including oral commensals and periodontopathogens. Mesh can be reached by bacteria in several ways including hematogenous spread from an oral site. However, other sites such as gut and skin may also
Bubble reconstruction method for wire-mesh sensors measurements
Mukin, Roman V.
2016-08-01
A new algorithm is presented for post-processing of void fraction measurements with wire-mesh sensors, particularly for identifying and reconstructing bubble surfaces in a two-phase flow. This method is a combination of the bubble recognition algorithm presented in Prasser (Nuclear Eng Des 237(15):1608, 2007) and Poisson surface reconstruction algorithm developed in Kazhdan et al. (Poisson surface reconstruction. In: Proceedings of the fourth eurographics symposium on geometry processing 7, 2006). To verify the proposed technique, a comparison was done of the reconstructed individual bubble shapes with those obtained numerically in Sato and Ničeno (Int J Numer Methods Fluids 70(4):441, 2012). Using the difference between reconstructed and referenced bubble shapes, the accuracy of the proposed algorithm was estimated. At the next step, the algorithm was applied to void fraction measurements performed in Ylönen (High-resolution flow structure measurements in a rod bundle (Diss., Eidgenössische Technische Hochschule ETH Zürich, Nr. 20961, 2013) by means of wire-mesh sensors in a rod bundle geometry. The reconstructed bubble shape yields bubble surface area and volume, hence its Sauter diameter d_{32} as well. Sauter diameter is proved to be more suitable for bubbles size characterization compared to volumetric diameter d_{30}, proved capable to capture the bi-disperse bubble size distribution in the flow. The effect of a spacer grid was studied as well: For the given spacer grid and considered flow rates, bubble size frequency distribution is obtained almost at the same position for all cases, approximately at d_{32} = 3.5 mm. This finding can be related to the specific geometry of the spacer grid or the air injection device applied in the experiments, or even to more fundamental properties of the bubble breakup and coagulation processes. In addition, an application of the new algorithm for reconstruction of a large air-water interface in a tube bundle is
Nonhydrostatic adaptive mesh dynamics for multiscale climate models (Invited)
Collins, W.; Johansen, H.; McCorquodale, P.; Colella, P.; Ullrich, P. A.
2013-12-01
Many of the atmospheric phenomena with the greatest potential impact in future warmer climates are inherently multiscale. Such meteorological systems include hurricanes and tropical cyclones, atmospheric rivers, and other types of hydrometeorological extremes. These phenomena are challenging to simulate in conventional climate models due to the relatively coarse uniform model resolutions relative to the native nonhydrostatic scales of the phenomonological dynamics. To enable studies of these systems with sufficient local resolution for the multiscale dynamics yet with sufficient speed for climate-change studies, we have adapted existing adaptive mesh dynamics for the DOE-NSF Community Atmosphere Model (CAM). In this talk, we present an adaptive, conservative finite volume approach for moist non-hydrostatic atmospheric dynamics. The approach is based on the compressible Euler equations on 3D thin spherical shells, where the radial direction is treated implicitly (using a fourth-order Runga-Kutta IMEX scheme) to eliminate time step constraints from vertical acoustic waves. Refinement is performed only in the horizontal directions. The spatial discretization is the equiangular cubed-sphere mapping, with a fourth-order accurate discretization to compute flux averages on faces. By using both space-and time-adaptive mesh refinement, the solver allocates computational effort only where greater accuracy is needed. The resulting method is demonstrated to be fourth-order accurate for model problems, and robust at solution discontinuities and stable for large aspect ratios. We present comparisons using a simplified physics package for dycore comparisons of moist physics. Hadley cell lifting an advected tracer into upper atmosphere, with horizontal adaptivity
Micro PEM Fuel Cells and Stacks
Institute of Scientific and Technical Information of China (English)
Shou-shing; Hsieh
2007-01-01
1 Results The effects of different operating parameters on micro proton exchange membrane (PEM) fuel cell performance were experimentally studied for three different flow field configurations (interdigitated,mesh,and serpentine).Experiments with different cell operating temperatures and different backpressures on the H2 flow channels,as well as various combinations of these parameters,have been conducted for three different flow geometries.The micro PEM fuel cells were designed and fabricated in-house t...
Jou, W.-H.
1982-01-01
An attempt is made to develop a three-dimensional, finite volume computational code for highly swept, twisted, small aspect ratio propeller blades with supersonic tip speeds, in a way that accounts for cascade effects, hub-induced flow, and nonlinear transonic effects. Attention is presently given to the generation of a computational mesh for such a complex propeller configuration, with the aim of sharing developmental process experience. The problem treated is unique, in that blade chord, blade length, hub length and blade-to-blade distance represent several characteristic length scales among which there is considerable disparity. An ad hoc mesh-generation scheme is accordingly developed.
Miniaturized polymer electrolyte fuel cell (PEFC) stack using micro structured bipolar plate
Energy Technology Data Exchange (ETDEWEB)
Veziridis, Z.; Scherer, G.G.; Marmy, Ch.; Glaus, F. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)
1999-08-01
In Polymer Electrolyte Fuel Cell (PEFC) technology the reducing of volume and mass of the fuel cell stack and the improvement of catalyst utilization are of great interest. These parameters affect applicability and system cost. In this work we present an alternative way for reducing the stack volume by combining gas distribution and catalytic active area in one plate. Micro machined glassy carbon electrodes serve as support material for the platinum catalyst, as well as gas distributor at the same time. A comparison of these electrodes with conventional platinum-black gas diffusion electrodes under fuel cell conditions shows that the new system is a promising electrode type for enhanced power density and catalyst utilization. (author) 3 figs., 5 refs.
Schoenmaeckers, Ernst J P; van der Valk, Steef B A; van den Hout, Huib W; Raymakers, Johan F T J; Rakic, Srdjan
2009-07-01
The potential for shrinkage of intraperitoneally implanted meshes for laparoscopic repair of ventral and incisional hernia (LRVIH) remains a concern. Numerous experimental studies on this issue reported very inconsistent results. Expanded polytetrafluoroethylene (ePTFE) mesh has the unique property of being revealed by computed tomography (CT). We therefore conducted an analysis of CT findings in patients who had previously undergone LRVIH with an ePTFE mesh (DualMesh, WL Gore, Flagstaff, AZ, USA) in order to evaluate the shrinkage of implanted meshes. Of 656 LRVIH patients with DualMesh, all patients who subsequently underwent CT scanning were identified and only those with precisely known transverse diameter of implanted mesh and with CT scans made more than 3 months postoperatively were selected (n = 40). Two radiologists who were blinded to the size of the implanted mesh measured in consensus the maximal transverse diameter of the meshes by using the AquariusNET program (TeraRecon Inc., San Mateo, CA, USA). Mesh shrinkage was defined as the relative loss of transverse diameter as compared with the original transverse diameter of the mesh. The mean time from LRVIH to CT scan was 17.9 months (range 3-59 months). The mean shrinkage of the mesh was 7.5% (range 0-23.7%). For 11 patients (28%) there was no shrinkage at all. Shrinkage of 1-10% was found in 16 patients (40%), of 10-20% in 10 patients (25%), and of 20-24% in 3 patients (7.5%). No correlation was found regarding the elapsed time between LRVIH and CT, and shrinkage. There were two recurrences, one possibly related to shrinkage. Our observations indicate that shrinkage of DualMesh is remarkably lower than has been reported in experimental studies (8-51%). This study is the first to address the problem of shrinkage after intraperitoneal implantation of synthetic mesh in a clinical material.
Directory of Open Access Journals (Sweden)
Gugri Mukthinath
2016-06-01
Full Text Available Background: Inguinal hernia repair is the most frequently performed operation in any general surgical unit. The complications of using the mesh has been the rationale to examine the role of mesh in hernia repair in detail and to begin investigating the biocompatibility of different mesh modifications and to challenge old mesh concepts. Therefore the present study is undertaken to compare the lightweight mesh (Ultrapro with conventional prolene mesh in lichtenstein hernia repair. Methods: Thirty one patients with primary unilateral inguinal hernia was subjected either to lightweight mesh Lichtenstein's hernioplasty or standard prolene mesh Lichtenstein's hernioplasty. The patients were followed in the surgical OPD at 1 month, 6 months and 1 year for time taken to return to normal activities, chronic groin pain, foreign body sensation, seroma formation and recurrence. Results: Chronic pain among patients in standard prolene mesh group at 1 month, 6 month, and 1 year follow up was seen in 45.2%, 16% and 3.2% of the patients respectively, in light weight mesh group patients at 1 month, 6 month and 1 year follow up was 32.2%, 6.4% and none at one year respectively. Foreign body sensation in the light weight mesh group is significantly less compared to patients in standard prolene mesh group. Time taken to return to work was relatively shorter among patients in Light weight mesh group. There was no recurrence in both groups. Conclusion: Light weight mesh is an ideal choice in Lichenstein's hernioplasty whenever feasible. [Int J Res Med Sci 2016; 4(6.000: 2130-2134
Refinement of numerical models and parametric study of SOFC stack performance
Burt, Andrew C.
The presence of multiple air and fuel channels per fuel cell and the need to combine many cells in series result in complex steady-state temperature distributions within Solid Oxide Fuel Cell (SOFC) stacks. Flow distribution in these channels, when non-uniform, has a significant effect on cell and stack performance. Large SOFC stacks are very difficult to model using full 3-D CFD codes because of the resource requirements needed to solve for the many scales involved. Studies have shown that implementations based on Reduced Order Methods (ROM), if calibrated appropriately, can provide simulations of stacks consisting of more than 20 cells with reasonable computational effort. A pseudo 2-D SOFC stack model capable of studying co-flow and counter-flow cell geometries was developed by solving multiple 1-D SOFC single cell models in parallel on a Beowulf cluster. In order to study cross-flow geometries a novel Multi-Component Multi-Physics (MCMP) scheme was instantiated to produce a Reduced Order 3-D Fuel Cell Model. A C++ implementation of the MCMP scheme developed in this study utilized geometry, control volume, component, and model structures allowing each physical model to be solved only for those components for which it is relevant. Channel flow dynamics were solved using a 1-D flow model to reduce computational effort. A parametric study was conducted to study the influence of mass flow distribution, radiation, and stack size on fuel cell stack performance. Using the pseudo 2-D planar SOFC stack model with stacks of various sizes from 2 to 40 cells it was shown that, with adiabatic wall conditions, the asymmetry of the individual cell can produce a temperature distribution where high and low temperatures are found in the top and bottom cells, respectively. Heat transfer mechanisms such as radiation were found to affect the reduction of the temperature gradient near the top and bottom cell. Results from the reduced order 3-D fuel cell model showed that greater
Project W-420 Stack Monitoring system upgrades conceptual design report
Energy Technology Data Exchange (ETDEWEB)
TUCK, J.A.
1998-11-06
This document describes the scope, justification, conceptual design, and performance of Project W-420 stack monitoring system upgrades on six NESHAP-designated, Hanford Tank Farms ventilation exhaust stacks.
Stacking for machine learning redshifts applied to SDSS galaxies
Zitlau, Roman; Hoyle, Ben; Paech, Kerstin; Weller, Jochen; Rau, Markus Michael; Seitz, Stella
2016-01-01
We present an analysis of a general machine learning technique called 'stacking' for the estimation of photometric redshifts. Stacking techniques can feed the photometric redshift estimate, as output by a base algorithm, back into the same algorithm as an additional input feature in a subsequent learning round. We shown how all tested base algorithms benefit from at least one additional stacking round (or layer). To demonstrate the benefit of stacking, we apply the method to both unsupervised...
Stacking from Tags: Clustering Bookmarks around a Theme
Zubiaga, Arkaitz; García-Plaza, Alberto Pérez; Fresno, Víctor; Martínez, Raquel
2013-01-01
Since very recently, users on the social bookmarking service Delicious can stack web pages in addition to tagging them. Stacking enables users to group web pages around specific themes with the aim of recommending to others. However, users still stack a small subset of what they tag, and thus many web pages remain unstacked. This paper presents early research towards automatically clustering web pages from tags to find stacks and extend recommendations.
Luminescence associated with stacking faults in GaN
Lähnemann, Jonas; Jahn, Uwe; Brandt, Oliver; Flissikowski, Timur; Dogan, Pinar; Grahn, Holger T.
2014-01-01
Basal-plane stacking faults are an important class of optically active structural defects in wurtzite semiconductors. The local deviation from the 2H stacking of the wurtzite matrix to a 3C zinc-blende stacking induces a bound state in the gap of the host crystal, resulting in the localization of excitons. Due to the two-dimensional nature of these planar defects, stacking faults act as quantum wells, giving rise to radiative transitions of excitons with characteristic energies. Luminescence ...
DEVS Models of Palletized Ground Stacking in Storeyed Grain Warehouse
Directory of Open Access Journals (Sweden)
Hou Shu-Yi
2016-01-01
Full Text Available Processed grain stored in storeyed warehouse is generally stacked on the ground without pallets. However, in order to improve the storing way, we developed a new stacking method, palletized ground stacking. Simulation should be used to present this new storing way. DEVS provides a formalized way to describe the system model. In this paper, DEVS models of palletized ground stacking in storeyed grain warehouse are given and a simulation model is developed by AutoMod.
High power collimated diode laser stack
Institute of Scientific and Technical Information of China (English)
LIU Yuan-yuan; FANG Gao-zhan; MA Xiao-yu; LIU Su-ping; FENG Xiao-ming
2006-01-01
A high power collimated diode laser stack is carried out based on fast-axis collimation and stack packaging techniques.The module includes ten typical continuous wave (cw) bars and the total output power can be up to 368W at 48.6A.Using a cylindrical lens as the collimation elements,we can make the fast-axis divergence and the slow-axis divergence are 0.926 40 and 8.2060 respectively.The light emitting area is limited in a square area of 18.3 mm×11 mm.The module has the advantage of high power density and offers a wide potential applications in pumping and material processing.
Multistage Force Amplification of Piezoelectric Stacks
Xu, Tian-Bing (Inventor); Siochi, Emilie J. (Inventor); Zuo, Lei (Inventor); Jiang, Xiaoning (Inventor); Kang, Jin Ho (Inventor)
2015-01-01
Embodiments of the disclosure include an apparatus and methods for using a piezoelectric device, that includes an outer flextensional casing, a first cell and a last cell serially coupled to each other and coupled to the outer flextensional casing such that each cell having a flextensional cell structure and each cell receives an input force and provides an output force that is amplified based on the input force. The apparatus further includes a piezoelectric stack coupled to each cell such that the piezoelectric stack of each cell provides piezoelectric energy based on the output force for each cell. Further, the last cell receives an input force that is the output force from the first cell and the last cell provides an output apparatus force In addition, the piezoelectric energy harvested is based on the output apparatus force. Moreover, the apparatus provides displacement based on the output apparatus force.
Development of on-site PAFC stacks
Energy Technology Data Exchange (ETDEWEB)
Hotta, K.; Matsumoto, Y. [Kansai Electric Power Co., Amagasaki (Japan); Horiuchi, H.; Ohtani, T. [Mitsubishi Electric Corp., Kobe (Japan)
1996-12-31
PAFC (Phosphoric Acid Fuel Cell) has been researched for commercial use and demonstration plants have been installed in various sites. However, PAFC don`t have a enough stability yet, so more research and development must be required in the future. Especially, cell stack needs a proper state of three phases (liquid, gas and solid) interface. It is very difficult technology to keep this condition for a long time. In the small size cell with the electrode area of 100 cm{sup 2}, gas flow and temperature distributions show uniformity. But in the large size cell with the electrode area of 4000 cm{sup 2}, the temperature distributions show non-uniformity. These distributions would cause to be shorten the cell life. Because these distributions make hot-spot and gas poverty in limited parts. So we inserted thermocouples in short-stack for measuring three-dimensional temperature distributions and observed effects of current density and gas utilization on temperature.
Absorption spectra of AA-stacked graphite
Energy Technology Data Exchange (ETDEWEB)
Chiu, C W; Lee, S H; Chen, S C; Lin, M F [Department of Physics, National Cheng Kung University, Taiwan (China); Shyu, F L, E-mail: fl.shyu@msa.hinet.ne, E-mail: mflin@mail.ncku.edu.t [Department of Physics, ROC Military Academy, 830 Kaohsiung, Taiwan (China)
2010-08-15
AA-stacked graphite shows strong anisotropy in geometric structures and velocity matrix elements. However, the absorption spectra are isotropic for the polarization vector on the graphene plane. The spectra exhibit one prominent plateau at middle energy and one shoulder structure at lower energy. These structures directly reflect the unique geometric and band structures and provide sufficient information for experimental fitting of the intralayer and interlayer atomic interactions. On the other hand, monolayer graphene shows a sharp absorption peak but no shoulder structure; AA-stacked bilayer graphene has two absorption peaks at middle energy and abruptly vanishes at lower energy. Furthermore, the isotropic features are expected to exist in other graphene-related systems. The calculated results and the predicted atomic interactions could be verified by optical measurements.
Text-Filled Stacked Area Graphs
DEFF Research Database (Denmark)
Kraus, Martin
2011-01-01
Text can add a significant amount of detail and value to an information visualization. In particular, it can integrate more of the data that a visualization is based on, and it can also integrate information that is personally relevant to readers of a visualization. This may influence readers...... to consider a visualization a detailed enrichment of their personal experience instead of an abstract representation of anonymous numbers. However, the integration of textual detail into a visualization is often very challenging. This work discusses one particular approach to this problem, namely text......-filled stacked area graphs; i.e., graphs that feature stacked areas that are filled with small-typed text. Since these graphs allow for computing the text layout automatically, it is possible to include large amounts of textual detail with very little effort. We discuss the most important challenges and some...
Industrial stacks design; Diseno de chimeneas industriales
Energy Technology Data Exchange (ETDEWEB)
Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
1986-12-31
The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.
The first self-sustainable microbial fuel cell stack.
Ledezma, Pablo; Stinchcombe, Andrew; Greenman, John; Ieropoulos, Ioannis
2013-02-21
This study reports for the first time on the development of a self-sustainable microbial fuel cell stack capable of self-maintenance (feeding, hydration, sensing & reporting). Furthermore, the stack system is producing excess energy, which can be used for improved functionality. The self-maintenance is performed by the stack powering single and multi-channel peristaltic pumps.
Spectral Analysis using Linearly Chirped Gaussian Pulse Stacking
Institute of Scientific and Technical Information of China (English)
ZHENG Huan; WANG An-Ting; XU Li-Xin; MING Hai
2009-01-01
We analyze the spectrum of a stacked pulse with the technique of linearly chirped Gaussian pulse stacking.Our results show that there are modulation structures in the spectrum of the stacked pulse. The modulation frequencies are discussed in detail. By applying spectral analysis, we find that the intensity fluctuation cannot be smoothed by introducing an optical amplitude filter.
Use of composite polyester/collagen mesh in the repair of recurrent congenital diaphragmatic hernias
Directory of Open Access Journals (Sweden)
Lin C. Wang
2015-09-01
Full Text Available Case 1 is an 18 year-old woman with a third recurrence of a left congenital diaphragmatic hernia (CDH. She had previously undergone a primary repair of a recurrence via laparotomy and an additional repair of a second recurrence with PTFE mesh via a thoracotomy. Following her third recurrence she underwent successful laparoscopic repair utilizing composite polyester/collagen (Parietex™ Composite, Covidien, Sofradim, France mesh. Six years following surgery, she has carried a pregnancy to term and has not recurred. Case 2 is a 5 month-old infant who presented with a recurrent right-sided CDH. She initially underwent primary repair via thoracotomy along with a right pneumonectomy at an outside institution. She presented with incarceration of her liver, hepatic venous thrombosis, mediastinal shift, and respiratory distress. She underwent successful repair with composite mesh through a right thoracoabdominal incision. At 8 months post-operatively, she has no evidence of recurrence in spite of the expected mediastinal deviation to the right and right thoracic volume loss as a result of being status post right pneumonectomy. Recurrences occur in a significant number of patients following repair of congenital diaphragmatic hernia, particularly cases in which a mesh implant are utilized. Historically, PTFE has been the product of choice for a diaphragmatic implant by pediatric surgeons. However, this product does not incorporate into surrounding tissues which theoretically places patients at risk for recurrence. Polyester/collagen composite mesh has been used for decades in adults undergoing complex groin and ventral hernia repairs with excellent results. However, its use for congenital diaphragmatic hernias has not been previously described. We present the successful utilization of this product in two cases which were at extremely high risk for future recurrence. Additional investigations should be done and long term follow up regarding application of
CAM and stack air sampler design guide
Energy Technology Data Exchange (ETDEWEB)
Phillips, T.D.
1994-05-13
About 128 air samplers and CAMs presently in service to detect and document potential radioactive release from `H` and `F` area tank farm ventilation stacks are scheduled for replacement and/or upgrade by Projects S-5764, S-2081, S-3603, and S-4516. The seven CAMs scheduled to be upgraded by Project S-4516 during 1995 are expected to provide valuable experience for the three remaining projects. The attached document provides design guidance for the standardized High Level Waste air sampling system.
Angular resolution of stacked resistive plate chambers
Samuel, Deepak; Murgod, Lakshmi P
2016-01-01
We present here detailed derivations of mathematical expressions for the angular resolution of a set of stacked resistive plate chambers (RPCs). The expressions are validated against experimental results using data collected from the prototype detectors (without magnet) of the upcoming India-based Neutrino Observatory (INO). In principle, these expressions can be used for any other detector with an architecture similar to that of RPCs.
The stack induced draft aerial cooler (SIDAC)
Energy Technology Data Exchange (ETDEWEB)
Hircock, N.C. [NC Hircock Process Consulting Ltd., Calgary, AB (Canada)]|[Patching Associates Acoustical Engineering Ltd. Calgary, AB (Canada)
2007-07-01
The oil and gas industry uses stack induced draft aerial coolers (SIDAC) for process cooling in noise sensitive areas or in areas where no electrical power is available. The technology produces zero noise, zero operating costs and zero emissions. This paper examined the use, operation and economics of fanless, noiseless aerial coolers. Although retrofitting to convert from fin-fan to SIDAC is not viable, this paper illustrated one common application where the installation of a tapered stack over a cooler could work together with variable speed fan drives to enhance the noise suppression achieved by variable speed fan drives. A stack assisted draft air cooler (SADAC) was installed over a conventional engine cooler enclosing the engine exhaust and muffler. The exhaust stack was also acoustically lined to augment the noise suppression of the engine silencer itself. The waste heat of the engine exhaust, combined with the heat from the cooler discharge, was used to create a negative pressure behind the cooler fan. Therefore, at night the fan could back off in speed. Since fan noise is proportional to speed to the exponent 5, even a 20 per cent reduction of fan speed generates a noticeable noise reduction. The noise directive of the Alberta Energy and Utilities Board is for lower noise levels at night rather than daytime. Therefore, this innovation allows plant operators to run coolers at full capacity in the day while backing off fan speed at night. It was concluded that substantial benefits can be achieved by SIDAC and SADAC technology in the areas of noise control, process improvements and emission reductions. The capital costs of using these devices are comparable with conventional systems, and operating costs are reduced.
[Meta-Mesh: metagenomic data analysis system].
Su, Xiaoquan; Song, Baoxing; Wang, Xuetao; Ma, Xinle; Xu, Jian; Ning, Kang
2014-01-01
With the current accumulation of metagenome data, it is possible to build an integrated platform for processing of rigorously selected metagenomic samples (also referred as "metagenomic communities" here) of interests. Any metagenomic samples could then be searched against this database to find the most similar sample(s). However, on one hand, current databases with a large number of metagenomic samples mostly serve as data repositories but not well annotated database, and only offer few functions for analysis. On the other hand, the few available methods to measure the similarity of metagenomic data could only compare a few pre-defined set of metagenome. It has long been intriguing scientists to effectively calculate similarities between microbial communities in a large repository, to examine how similar these samples are and to find the correlation of the meta-information of these samples. In this work we propose a novel system, Meta-Mesh, which includes a metagenomic database and its companion analysis platform that could systematically and efficiently analyze, compare and search similar metagenomic samples. In the database part, we have collected more than 7 000 high quality and well annotated metagenomic samples from the public domain and in-house facilities. The analysis platform supplies a list of online tools which could accept metagenomic samples, build taxonomical annotations, compare sample in multiple angle, and then search for similar samples against its database by a fast indexing strategy and scoring function. We also used case studies of "database search for identification" and "samples clustering based on similarity matrix" using human-associated habitat samples to demonstrate the performance of Meta-Mesh in metagenomic analysis. Therefore, Meta-Mesh would serve as a database and data analysis system to quickly parse and identify similar
When is stacking confusing? The impact of confusion on stacking in deep H I galaxy surveys
Jones, Michael G.; Haynes, Martha P.; Giovanelli, Riccardo; Papastergis, Emmanouil
2016-01-01
We present an analytic model to predict the H I mass contributed by confused sources to a stacked spectrum in a generic H I survey. Based on the ALFALFA (Arecibo Legacy Fast ALFA) correlation function, this model is in agreement with the estimates of confusion present in stacked Parkes telescope data, and was used to predict how confusion will limit stacking in the deepest Square Kilometre Array precursor H I surveys. Stacking with LADUMA (Looking At the Distant Universe with MeerKAT) and DINGO UDEEP (Deep Investigation of Neutral Gas Origins - Ultra Deep) data will only be mildly impacted by confusion if their target synthesized beam size of 10 arcsec can be achieved. Any beam size significantly above this will result in stacks that contain a mass in confused sources that is comparable to (or greater than) that which is detectable via stacking, at all redshifts. CHILES (COSMOS H I Large Extragalactic Survey) 5 arcsec resolution is more than adequate to prevent confusion influencing stacking of its data, throughout its bandpass range. FAST (Five hundred metre Aperture Spherical Telescope) will be the most impeded by confusion, with H I surveys likely becoming heavily confused much beyond z = 0.1. The largest uncertainties in our model are the redshift evolution of the H I density of the Universe and the H I correlation function. However, we argue that the two idealized cases we adopt should bracket the true evolution, and the qualitative conclusions are unchanged regardless of the model choice. The profile shape of the signal due to confusion (in the absence of any detection) was also modelled, revealing that it can take the form of a double Gaussian with a narrow and wide component.
Thyristor stack for pulsed inductive plasma generation.
Teske, C; Jacoby, J; Schweizer, W; Wiechula, J
2009-03-01
A thyristor stack for pulsed inductive plasma generation has been developed and tested. The stack design includes a free wheeling diode assembly for current reversal. Triggering of the device is achieved by a high side biased, self supplied gate driver unit using gating energy derived from a local snubber network. The structure guarantees a hard firing gate pulse for the required high dI/dt application. A single fiber optic command is needed to achieve a simultaneous turn on of the thyristors. The stack assembly is used for switching a series resonant circuit with a ringing frequency of 30 kHz. In the prototype pulsed power system described here an inductive discharge has been generated with a pulse duration of 120 micros and a pulse energy of 50 J. A maximum power transfer efficiency of 84% and a peak power of 480 kW inside the discharge were achieved. System tests were performed with a purely inductive load and an inductively generated plasma acting as a load through transformer action at a voltage level of 4.1 kV, a peak current of 5 kA, and a current switching rate of 1 kA/micros.
Directory of Open Access Journals (Sweden)
Ranga Raj R.,
2015-05-01
Full Text Available At present, composite materials are mostly used in aircraft structural components, because of their excellent properties like lightweight, high strength to weight ratio, high stiffness, and corrosion resistance and less expensive. In this experimental work, the mechanical properties of laminate, this is reinforced with stainless steel wire mesh, aluminum sheet metal, perforated aluminum sheet metal and glass fibers to be laminate and investigated. The stainless steel wire mesh and perforated aluminum metal were sequentially stacked to fabricate, hybrid composites. The aluminum metal sheet is also employed with that sequence to get maximum strength and less weight. The tensile, compressive and flexure tests carried out on the hybrid composite. To investigate the mechanical properties and elastic properties of the metal matrix composite laminate of a material we are using experimental test and theoretical calculation. The experimental work consists of Tensile, compressive and flexural test. The expectation of this project results in the tensile and compressive properties of this hybrid composite it is slightly lesser than carbon fibers but it could facilitate a weight reduction compared with CFRP panels. So this hybrid laminates composite material offering significant weight savings and maximum strength over some other GFRP conventional panels.
Unbiased sampling and meshing of isosurfaces
Yan, Dongming
2014-11-01
In this paper, we present a new technique to generate unbiased samples on isosurfaces. An isosurface, F(x,y,z) = c , of a function, F , is implicitly defined by trilinear interpolation of background grid points. The key idea of our approach is that of treating the isosurface within a grid cell as a graph (height) function in one of the three coordinate axis directions, restricted to where the slope is not too high, and integrating / sampling from each of these three. We use this unbiased sampling algorithm for applications in Monte Carlo integration, Poisson-disk sampling, and isosurface meshing.
Perspective on the Lagrange-Jacobi mesh
Rampho, Gaotsiwe J.
2016-07-01
This paper presents a unified treatment of the kinetic energy matrix elements related to a number of Lagrange functions associated with the Lagrange-Jacobi mesh. The matrix elements can be readily modified for application to problems requiring eigenfunction expansion with Lagrange-Legendre, Lagrange-Chebyshev, Lagrange-Gegenbauer, as well as the Lagrange-Jacobi functions. The applicability of and the accuracy attainable with the matrix elements is demonstrated with the solution to the Schrödinger equation for confining trigonometric Pöschl-Teller potentials. The results obtained are within machine accuracy when appropriate choices of the basis functions are used.
Performance of FACTS equipment in Meshed systems
Energy Technology Data Exchange (ETDEWEB)
Lerch, E.; Povh, D. [Siemens AG, Berlin (Germany)
1994-12-31
Modern power electronic devices such as thyristors and GTOs have made it possible to design controllable network elements, which will play a considerable role in ensuring reliable economic operation of transmission systems as a result of their capability to rapidly change active and reactive power. A number of FACTS elements for high-speed active and reactive power control will be described. Control of power system fluctuations in meshed systems by modulation of active and reactive power will be demonstrated using a number of examples. (author) 7 refs., 11 figs.
Corset neophallic musculoplasty with a mesh endoprosthesis
Directory of Open Access Journals (Sweden)
V. V. Mikhailichenko
2014-12-01
Full Text Available During thoracodorsal flap phalloplasty, recovered contractility of the muscular base of the neophallus may lead to its shortening that impedes introjection.To eliminate deformity and shortening of the neophallus, the authors propose the procedure of corset plasty of its muscle, which differs in that the alloplastic material – esfil mesh endoprosthesis, is used as a corset instead of fascia latum of the hip. The proposed procedure reduces surgical trauma, improves the functional characteristics of the neophallus, and accelerates sexual rehabilitation.
Corset neophallic musculoplasty with a mesh endoprosthesis
Directory of Open Access Journals (Sweden)
V. V. Mikhailichenko
2014-01-01
Full Text Available During thoracodorsal flap phalloplasty, recovered contractility of the muscular base of the neophallus may lead to its shortening that impedes introjection.To eliminate deformity and shortening of the neophallus, the authors propose the procedure of corset plasty of its muscle, which differs in that the alloplastic material – esfil mesh endoprosthesis, is used as a corset instead of fascia latum of the hip. The proposed procedure reduces surgical trauma, improves the functional characteristics of the neophallus, and accelerates sexual rehabilitation.
Relativistic MHD with adaptive mesh refinement
Energy Technology Data Exchange (ETDEWEB)
Anderson, Matthew [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803-4001 (United States); Hirschmann, Eric W [Department of Physics and Astronomy, Brigham Young University, Provo, UT 84602 (United States); Liebling, Steven L [Department of Physics, Long Island University-C W Post Campus, Brookville, NY 11548 (United States); Neilsen, David [Department of Physics and Astronomy, Brigham Young University, Provo, UT 84602 (United States)
2006-11-22
This paper presents a new computer code to solve the general relativistic magnetohydrodynamics (GRMHD) equations using distributed parallel adaptive mesh refinement (AMR). The fluid equations are solved using a finite difference convex ENO method (CENO) in 3 + 1 dimensions, and the AMR is Berger-Oliger. Hyperbolic divergence cleaning is used to control the {nabla} . B = 0 constraint. We present results from three flat space tests, and examine the accretion of a fluid onto a Schwarzschild black hole, reproducing the Michel solution. The AMR simulations substantially improve performance while reproducing the resolution equivalent unigrid simulation results. Finally, we discuss strong scaling results for parallel unigrid and AMR runs.
Final Report - MEA and Stack Durability for PEM Fuel Cells
Energy Technology Data Exchange (ETDEWEB)
Yandrasits, Michael A.
2008-02-15
the same. (6) Through the use of statistical lifetime analysis methods, it is possible to develop new MEAs with predicted durability approaching the DOE 2010 targets. (7) A segmented cell was developed that extend the resolution from ~ 40 to 121 segments for a 50cm2 active area single cell which allowed for more precise investigation of the local phenomena in a operating fuel cell. (8) The single cell concept was extended to a fuel size stack to allow the first of its kind monitoring and mapping of an operational fuel cell stack. An internal check used during this project involved evaluating the manufacturability of any new MEA component. If a more durable MEA component was developed in the lab, but could not be scaled-up to ‘high speed, high volume manufacturing’, then that component was not selected for the final MEA-fuel cell system demonstration. It is the intent of the team to commercialize new products developed under this project, but commercialization can not occur if the manufacture of said new components is difficult or if the price is significantly greater than existing products as to make the new components not cost competitive. Thus, the end result of this project is the creation of MEA and fuel cell system technology that is capable of meeting the DOEs 2010 target of 40,000 hours for stationary fuel cell systems (although this lifetime has not been demonstrated in laboratory or field testing yet) at a cost that is economically viable for the developing fuel cell industry. We have demonstrated over 2,000 hours of run time for the MEA and system developed under this project.
Split Bregman's algorithm for three-dimensional mesh segmentation
Habiba, Nabi; Ali, Douik
2016-05-01
Variational methods have attracted a lot of attention in the literature, especially for image and mesh segmentation. The methods aim at minimizing the energy to optimize both edge and region detections. We propose a spectral mesh decomposition algorithm to obtain disjoint but meaningful regions of an input mesh. The related optimization problem is nonconvex, and it is very difficult to find a good approximation or global optimum, which represents a challenge in computer vision. We propose an alternating split Bregman algorithm for mesh segmentation, where we extended the image-dedicated model to a three-dimensional (3-D) mesh one. By applying our scheme to 3-D mesh segmentation, we obtain fast solvers that can outperform various conventional ones, such as graph-cut and primal dual methods. A consistent evaluation of the proposed method on various public domain 3-D databases for different metrics is elaborated, and a comparison with the state-of-the-art is performed.
Embedding meshes in Boolean cubes by graph decomposition
Energy Technology Data Exchange (ETDEWEB)
Ho, C.T. (IBM Almaden Research Center, San Jose, CA (US)); Johnsson, S.L. (Dept. of Computer Science and Electrical Engineering, Yale Univ., New Haven, CT (US))
1990-04-01
This paper explores the embeddings of multidimensional meshes into minimal Boolean cubes by graph decomposition. The graph decomposition technique can be used to improve the average dilation and average congestion. The graph decomposition technique combined with some particular two-dimensional embeddings allows for minimal-expansion, dilation-two, congestion-two embeddings of about 87% of all two-dimensional meshes, with a significantly lower average dilation and congestion than by modified line compression. For three-dimensional meshes the authors show that the graph decomposition technique, together with two three-dimensional mesh embeddings presented in this paper and modified line compression, yields dilation-two embeddings of more than 96% of all three dimensional meshes contained in a 512 {times} 512 {times} 512 mesh.
HypGrid2D. A 2-d mesh generator
Energy Technology Data Exchange (ETDEWEB)
Soerensen, N.N.
1998-03-01
The implementation of a hyperbolic mesh generation procedure, based on an equation for orthogonality and an equation for the cell face area is described. The method is fast, robust and gives meshes with good smoothness and orthogonality. The procedure is implemented in a program called HypGrid2D. The HypGrid2D program is capable of generating C-, O- and `H`-meshes for use in connection with the EllipSys2D Navier-Stokes solver. To illustrate the capabilities of the program, some test examples are shown. First a series of C-meshes are generated around a NACA-0012 airfoil. Secondly a series of O-meshes are generated around a NACA-65-418 airfoil. Finally `H`-meshes are generated over a Gaussian hill and a linear escarpment. (au)
Investigation of Mesh Choosing Parameters in Screen Printing System
Directory of Open Access Journals (Sweden)
Ahmet AKGÜL
2012-05-01
Full Text Available The mesh, which is made by weaving of natural silk, plastic, or metal fibers, is basic material for screen-printing. Image is created on stretched on a frame in screen-printing. Mesh should be selected correctly for a high quality printing. Therefore, substrates, types of print job and mesh parameters have importance. Need to know more about to mesh, yarn type, yarn thickness, frequency of weaving, stretching tension, the kind of weaving, etc. In this study, for a high quality screen-printing, mesh variables examined in detail and optimum conditions indicated, with the aim of increase productivity, minimize to losses time, material and labor. As a result, this information’s for obtaining a high quality printing with screen-printing system have importance as a guide. Also resolution of the image, amount of print run and viscosity of the printing ink, factors affecting the selection of mesh.
2010-07-01
... maintain a flow monitoring system and diluent monitor in the duct to the common stack from each unit; or...; (2) Monitor NOX mass emissions at the main stack using a NOX-diluent CEMS and a flow monitoring... chooses to monitor in the ducts rather than in the stack, the owner or operator shall either: (1)...
MeSH Up: effective MeSH text classification for improved document retrieval
Trieschnigg, Dolf; Pezik, Piotr; Lee, Vivian; Jong, de Franciska; Kraaij, Wessel; Rebholz-Schuhmann, Dietrich
2009-01-01
Motivation: Controlled vocabularies such as the Medical Subject Headings (MeSH) thesaurus and the Gene Ontology (GO) provide an efficient way of accessing and organizing biomedical information by reducing the ambiguity inherent to free-text data. Different methods of automating the assignment of MeS
MeSH Up: Effective MeSH text classification for improved document retrieval
Trieschnigg, D.; Pezik, P.; Lee, V.; Jong, F.de; Kraaij, W.; Rebholz-Schuhmann, D.
2009-01-01
Motivation: Controlled vocabularies such as the Medical Subject Headings (MeSH) thesaurus and the Gene Ontology (GO) provide an efficient way of accessing and organizing biomedical information by reducing the ambiguity inherent to free-text data. Different methods of automating the assignment of MeS
Footbridge between finite volumes and finite elements with applications to CFD
Pascal, Frédéric; Ghidaglia, Jean-Michel
2001-12-01
The aim of this paper is to introduce a new algorithm for the discretization of second-order elliptic operators in the context of finite volume schemes on unstructured meshes. We are strongly motivated by partial differential equations (PDEs) arising in computational fluid dynamics (CFD), like the compressible Navier-Stokes equations. Our technique consists of matching up a finite volume discretization based on a given mesh with a finite element representation on the same mesh. An inverse operator is also built, which has the desirable property that in the absence of diffusion, one recovers exactly the finite volume solution. Numerical results are also provided. Copyright
AUTOMATIC MESH GENERATION OF 3-D GEOMETRIC MODELS
Institute of Scientific and Technical Information of China (English)
刘剑飞
2003-01-01
In this paper the presentation of the ball-packing method is reviewed,and a scheme to generate mesh for complex 3-D geometric models is given,which consists of 4 steps:(1)create nodes in 3-D models by ball-packing method,(2)connect nodes to generate mesh by 3-D Delaunay triangulation,(3)retrieve the boundary of the model after Delaunay triangulation,(4)improve the mesh.
Vertex-based diffusion for 3-D mesh denoising.
Zhang, Ying; Ben Hamza, A
2007-04-01
We present a vertex-based diffusion for 3-D mesh denoising by solving a nonlinear discrete partial differential equation. The core idea behind our proposed technique is to use geometric insight in helping construct an efficient and fast 3-D mesh smoothing strategy to fully preserve the geometric structure of the data. Illustrating experimental results demonstrate a much improved performance of the proposed approach in comparison with existing methods currently used in 3-D mesh smoothing.
Multiphase Flow of Immiscible Fluids on Unstructured Moving Meshes
DEFF Research Database (Denmark)
Misztal, Marek Krzysztof; Erleben, Kenny; Bargteil, Adam;
2013-01-01
In this paper, we present a method for animating multiphase flow of immiscible fluids using unstructured moving meshes. Our underlying discretization is an unstructured tetrahedral mesh, the deformable simplicial complex (DSC), that moves with the flow in a Lagrangian manner. Mesh optimization op...... complement and solve our optimization on the GPU. We provide the results of parameter studies as well as a performance analysis of our method, together with suggestions for performance optimization....
Automated quadrilateral mesh generation for digital image structures
Institute of Scientific and Technical Information of China (English)
无
2011-01-01
With the development of advanced imaging technology, digital images are widely used. This paper proposes an automatic quadrilateral mesh generation algorithm for multi-colour imaged structures. It takes an original arbitrary digital image as an input for automatic quadrilateral mesh generation, this includes removing the noise, extracting and smoothing the boundary geometries between different colours, and automatic all-quad mesh generation with the above boundaries as constraints. An application example is...
Hexahedral mesh generation via the dual arrangement of surfaces
Energy Technology Data Exchange (ETDEWEB)
Mitchell, S.A.; Tautges, T.J. [Sandia National Labs., Albuquerque, NM (United States)
1997-12-31
Given a general three-dimensional geometry with a prescribed quadrilateral surface mesh, the authors consider the problem of constructing a hexahedral mesh of the geometry whose boundary is exactly the prescribed surface mesh. Due to the specialized topology of hexahedra, this problem is more difficult than the analogous one for tetrahedra. Folklore has maintained that a surface mesh must have a constrained structure in order for there to exist a compatible hexahedral mesh. However, they have proof that a surface mesh need only satisfy mild parity conditions, depending on the topology of the three-dimensional geometry, for there to exist a compatible hexahedral mesh. The proof is based on the realization that a hexahedral mesh is dual to an arrangement of surfaces, and the quadrilateral surface mesh is dual to the arrangement of curves bounding these surfaces. The proof is constructive and they are currently developing an algorithm called Whisker Weaving (WW) that mirrors the proof steps. Given the bounding curves, WW builds the topological structure of an arrangement of surfaces having those curves as its boundary. WW progresses in an advancing front manner. Certain local rules are applied to avoid structures that lead to poor mesh quality. Also, after the arrangement is constructed, additional surfaces are inserted to separate features, so e.g., no two hexahedra share more than one quadrilateral face. The algorithm has generated meshes for certain non-trivial problems, but is currently unreliable. The authors are exploring strategies for consistently selecting which portion of the surface arrangement to advance based on the existence proof. This should lead us to a robust algorithm for arbitrary geometries and surface meshes.
High-Density Stacked Ru Nanocrystals for Nonvolatile Memory Application
Institute of Scientific and Technical Information of China (English)
MAO Ping; ZHANG Zhi-Gang; PAN Li-Yang; XU Jun; CHEN Pei-Yi
2009-01-01
@@ Stacked ruthenium (Ru) nanocrystals (NCs) are formed by rapid thermal annealing for the whole gate stacks and embedded in memory structure, which is compatible with conventional CMOS technology. Ru NCs with high density (3×1012 cm-2 ), small size (2-4 nm) and good uniformity both in aerial distribution and morphology are formed. Attributed to the higher surface trap density, a memory window of 5.2 V is obtained with stacked Ru NCs in comparison to that of 3.5 V with single-layer samples. The stacked Ru NCs device also exhibits much better retention performance because of Coulomb blockade and vertical uniformity between stacked Ru NCs.
Narrow line diode laser stacks for DPAL pumping
Koenning, Tobias; Irwin, David; Stapleton, Dean; Pandey, Rajiv; Guiney, Tina; Patterson, Steve
2014-02-01
Diode pumped alkali metal vapor lasers (DPALs) offer the promise of scalability to very high average power levels while maintaining excellent beam quality, making them an attractive candidate for future defense applications. A variety of gain media are used and each requires a different pump wavelength: near 852nm for cesium, 780nm for rubidium, 766nm for potassium, and 670nm for lithium atoms. The biggest challenge in pumping these materials efficiently is the narrow gain media absorption band of approximately 0.01nm. Typical high power diode lasers achieve spectral widths around 3nm (FWHM) in the near infrared spectrum. With state of the art locking techniques, either internal to the cavity or externally mounted gratings, the spectral width can typically be reduced to 0.5nm to 1nm for kW-class, high power stacks. More narrow spectral width has been achieved at lower power levels. The diode's inherent wavelength drift over operating temperature and output power is largely, but not completely, eliminated. However, standard locking techniques cannot achieve the required accuracy on the location of the spectral output or the spectral width for efficient DPAL pumping. Actively cooled diode laser stacks with continuous wave output power of up to 100W per 10mm bar at 780nm optimized for rubidium pumping will be presented. Custom designed external volume holographic gratings (VHGs) in conjunction with optimized chip material are used to narrow and stabilize the optical spectrum. Temperature tuning on a per-bar-level is used to overlap up to fifteen individual bar spectra into one narrow peak. At the same time, this tuning capability can be used to adjust the pump wavelength to match the absorption band of the active medium. A spectral width of <0.1nm for the entire stack is achieved at <1kW optical output power. Tuning of the peak wavelength is demonstrated for up to 0.15nm. The technology can easily be adapted to other diode laser wavelengths to pump different materials.
Crop classification using temporal stacks of multispectral satellite imagery
Moody, Daniela I.; Brumby, Steven P.; Chartrand, Rick; Keisler, Ryan; Longbotham, Nathan; Mertes, Carly; Skillman, Samuel W.; Warren, Michael S.
2017-05-01
The increase in performance, availability, and coverage of multispectral satellite sensor constellations has led to a drastic increase in data volume and data rate. Multi-decadal remote sensing datasets at the petabyte scale are now available in commercial clouds, with new satellite constellations generating petabytes/year of daily high-resolution global coverage imagery. The data analysis capability, however, has lagged behind storage and compute developments, and has traditionally focused on individual scene processing. We present results from an ongoing effort to develop satellite imagery analysis tools that aggregate temporal, spatial, and spectral information and can scale with the high-rate and dimensionality of imagery being collected. We investigate and compare the performance of pixel-level crop identification using tree-based classifiers and its dependence on both temporal and spectral features. Classification performance is assessed using as ground-truth Cropland Data Layer (CDL) crop masks generated by the US Department of Agriculture (USDA). The CDL maps contain 30m spatial resolution, pixel-level labels for around 200 categories of land cover, but are however only available post-growing season. The analysis focuses on McCook county in South Dakota and shows crop classification using a temporal stack of Landsat 8 (L8) imagery over the growing season, from April through October. Specifically, we consider the temporal L8 stack depth, as well as different normalized band difference indices, and evaluate their contribution to crop identification. We also show an extension of our algorithm to map corn and soy crops in the state of Mato Grosso, Brazil.
Digital subtraction peripheral angiography using image stacking: initial clinical results.
Kump, K S; Sachs, P B; Wilson, D L
2001-07-01
Using clinically acquired x-ray angiography image sequences, we compared three algorithms for creating a single diagnostic quality image that combined input images containing flowing contrast agent. These image-stacking algorithms were: maximum opacity with the minimum gray-scale value across time recorded at each spatial location, (REC) recursive temporal filtering followed by a maximum opacity operation, and (AMF) an approximate matched filter consisting of a convolution with a kernel approximating the matched filter followed by a maximum opacity operation. Eighteen clinical exams of the peripheral arteries of the legs were evaluated. AMF gave 2.7 times greater contrast to noise ratio than the single best subtraction image and 1.3 times improvement over REC, the second best stacking algorithm. This is consistent with previous simulations showing that AMF performs nearly equal to the optimal result from matched filtering without the well-known limitations. For example, unlike matched filtering, AMF filter coefficients were obtained automatically using an image-processing algorithm. AMF effectively brought out small collateral arteries, otherwise difficult to see, without degrading artery sharpness or stenosis grading. Comparing results using reduced and full contrast agent volumes demonstrated that contrast agent load could be reduced to one-third of the conventional amount with AMF processing. By simulating reduced x-ray exposures on clinical exams, we determined that x-ray exposure could be reduced by 80% with AMF processing. We conclude that AMF is a promising, potential technique for reducing contrast agent load and for improving vessel visibility, both very important characteristics for vascular imaging.
GRChombo : Numerical Relativity with Adaptive Mesh Refinement
Clough, Katy; Finkel, Hal; Kunesch, Markus; Lim, Eugene A; Tunyasuvunakool, Saran
2015-01-01
Numerical relativity has undergone a revolution in the past decade. With a well-understood mathematical formalism, and full control over the gauge modes, it is now entering an era in which the science can be properly explored. In this work, we introduce GRChombo, a new numerical relativity code written to take full advantage of modern parallel computing techniques. GRChombo's features include full adaptive mesh refinement with block structured Berger-Rigoutsos grid generation which supports non-trivial "many-boxes-in-many-boxes" meshing hierarchies, and massive parallelism through the Message Passing Interface (MPI). GRChombo evolves the Einstein equation with the standard BSSN formalism, with an option to turn on CCZ4 constraint damping if required. We show that GRChombo passes all the standard "Apples-to-Apples" code comparison tests. We also show that it can stably and accurately evolve vacuum black hole spacetimes such as binary black hole mergers, and non-vacuum spacetimes such as scalar collapses into b...
The Tera Multithreaded Architecture and Unstructured Meshes
Bokhari, Shahid H.; Mavriplis, Dimitri J.
1998-01-01
The Tera Multithreaded Architecture (MTA) is a new parallel supercomputer currently being installed at San Diego Supercomputing Center (SDSC). This machine has an architecture quite different from contemporary parallel machines. The computational processor is a custom design and the machine uses hardware to support very fine grained multithreading. The main memory is shared, hardware randomized and flat. These features make the machine highly suited to the execution of unstructured mesh problems, which are difficult to parallelize on other architectures. We report the results of a study carried out during July-August 1998 to evaluate the execution of EUL3D, a code that solves the Euler equations on an unstructured mesh, on the 2 processor Tera MTA at SDSC. Our investigation shows that parallelization of an unstructured code is extremely easy on the Tera. We were able to get an existing parallel code (designed for a shared memory machine), running on the Tera by changing only the compiler directives. Furthermore, a serial version of this code was compiled to run in parallel on the Tera by judicious use of directives to invoke the "full/empty" tag bits of the machine to obtain synchronization. This version achieves 212 and 406 Mflop/s on one and two processors respectively, and requires no attention to partitioning or placement of data issues that would be of paramount importance in other parallel architectures.
Mesh-based parallel code coupling interface
Energy Technology Data Exchange (ETDEWEB)
Wolf, K.; Steckel, B. (eds.) [GMD - Forschungszentrum Informationstechnik GmbH, St. Augustin (DE). Inst. fuer Algorithmen und Wissenschaftliches Rechnen (SCAI)
2001-04-01
MpCCI (mesh-based parallel code coupling interface) is an interface for multidisciplinary simulations. It provides industrial end-users as well as commercial code-owners with the facility to combine different simulation tools in one environment. Thereby new solutions for multidisciplinary problems will be created. This opens new application dimensions for existent simulation tools. This Book of Abstracts gives a short overview about ongoing activities in industry and research - all presented at the 2{sup nd} MpCCI User Forum in February 2001 at GMD Sankt Augustin. (orig.) [German] MpCCI (mesh-based parallel code coupling interface) definiert eine Schnittstelle fuer multidisziplinaere Simulationsanwendungen. Sowohl industriellen Anwender als auch kommerziellen Softwarehersteller wird mit MpCCI die Moeglichkeit gegeben, Simulationswerkzeuge unterschiedlicher Disziplinen miteinander zu koppeln. Dadurch entstehen neue Loesungen fuer multidisziplinaere Problemstellungen und fuer etablierte Simulationswerkzeuge ergeben sich neue Anwendungsfelder. Dieses Book of Abstracts bietet einen Ueberblick ueber zur Zeit laufende Arbeiten in der Industrie und in der Forschung, praesentiert auf dem 2{sup nd} MpCCI User Forum im Februar 2001 an der GMD Sankt Augustin. (orig.)
Feature detection of triangular meshes vianeighbor supporting
Institute of Scientific and Technical Information of China (English)
Xiao-chao WANG; Jun-jie CAO; Xiu-ping LIU; Bao-jun LI; Xi-quan SHI; Yi-zhen SUN
2012-01-01
We propose a robust method for detecting features on triangular meshes by combining normal tensor voting with neighbor supporting.Our method contains two stages:feature detection and feature refinement.First,the normal tensor voting method is modified to detect the initial features,which may include some pseudo features.Then,at the feature refinement stage,a novel salient measure deriving from the idea of neighbor supporting is developed. Benefiting from the integrated reliable salient measure feature,pseudo features can be effectively discriminated from the initially detected features and removed. Compared to previous methods based on the differential geometric property,the main advantage of our method is that it can detect both sharp and weak features.Numerical experiments show that our algorithm is robust,effective,and can produce more accurate results.We also discuss how detected features are incorporated into applications,such as feature-preserving mesh denoising and hole-filling,and present visually appealing results by integrating feature information.
Compact Design of 10 kW Proton Exchange Membrane Fuel Cell Stack Systems with Microcontroller Units
Directory of Open Access Journals (Sweden)
Hsiaokang Ma
2014-04-01
Full Text Available In this study, fuel, oxidant supply and cooling systems with microcontroller units (MCU are developed in a compact design to fit two 5 kW proton exchange membrane fuel cell (PEMFC stacks. At the initial stage, the testing facility of the system has a large volume (2.0 m × 2.0 m × 1.5 m with a longer pipeline and excessive control sensors for safe testing. After recognizing the performance and stability of stack, the system is redesigned to fit in a limited space (0.4 m × 0.5 m × 0.8 m. Furthermore, the stack performance is studied under different hydrogen recycling modes. Then, two similar 5 kW stacks are directly coupled with diodes to obtain a higher power output and safe operation. The result shows that the efficiency of the 5 kW stack is 43.46% with a purge period of 2 min with hydrogen recycling and that the hydrogen utilization rate µf is 66.31%. In addition, the maximum power output of the twin-coupled module (a power module with two stacks in electrical cascade/parallel arrangement is 9.52 kW.
An Evaluation Method for Distortion Energy Parameterization of Triangular Meshes
Institute of Scientific and Technical Information of China (English)
SHI Jing; ZHAO Xiu-yang; ZHANG Cai-ming; YANG Bo
2013-01-01
Parameterization of triangle meshes is a fundamental problem for texture mapping, surface fitting, surface reconstruction, and mesh editing. The deformation of triangular meshes caused by the parameterized process is the measurement of parameterization. Traditional standard method has its limitation when evaluating mixture distortion energy parameterizations. Thus an evaluation method bases on distortion energy parameterization of triangular meshes is introduced for the limitation. The novel method employs an adaptive expression form to the mixture energy, and uses a weight factor to represent distortion energy distribution. By using this method, we can evaluate all kinds of parameterization in a uniform measurement and acquire a more intuitive and clear evaluation.
The mesh controversy [version 1; referees: 2 approved
Directory of Open Access Journals (Sweden)
Joshua A. Cohn
2016-09-01
Full Text Available Pelvic organ prolapse and stress urinary incontinence are common conditions for which approximately 11% of women will undergo surgical intervention in their lifetime. The use of vaginal mesh for pelvic organ prolapse and stress urinary incontinence rose rapidly in the early 2000s as over 100 mesh products were introduced into the clinical armamentarium with little regulatory oversight for their use. US Food and Drug Administration Public Health Notifications in 2008 and 2011, as well as reclassification of transvaginal mesh for prolapse to class III in early 2016, were a response to debilitating complications associated with transvaginal mesh placement in many women. The midurethral sling has not been subject to the same reclassification and continues to be endorsed as the “gold standard” for surgical management of stress urinary incontinence by subspecialty societies. However, litigators have not differentiated between mesh for prolapse and mesh for incontinence. As such, all mesh, including that placed for stress urinary incontinence, faces continued controversy amidst an uncertain future. In this article, we review the background of the mesh controversy, recent developments, and the anticipated role of mesh in surgery for prolapse and stress urinary incontinence going forward.
Numerical modeling of seismic waves using frequency-adaptive meshes
Hu, Jinyin; Jia, Xiaofeng
2016-08-01
An improved modeling algorithm using frequency-adaptive meshes is applied to meet the computational requirements of all seismic frequency components. It automatically adopts coarse meshes for low-frequency computations and fine meshes for high-frequency computations. The grid intervals are adaptively calculated based on a smooth inversely proportional function of grid size with respect to the frequency. In regular grid-based methods, the uniform mesh or non-uniform mesh is used for frequency-domain wave propagators and it is fixed for all frequencies. A too coarse mesh results in inaccurate high-frequency wavefields and unacceptable numerical dispersion; on the other hand, an overly fine mesh may cause storage and computational overburdens as well as invalid propagation angles of low-frequency wavefields. Experiments on the Padé generalized screen propagator indicate that the Adaptive mesh effectively solves these drawbacks of regular fixed-mesh methods, thus accurately computing the wavefield and its propagation angle in a wide frequency band. Several synthetic examples also demonstrate its feasibility for seismic modeling and migration.
Dimensionality Reduction of Laplacian Embedding for 3D Mesh Reconstruction
Mardhiyah, I.; Madenda, S.; Salim, R. A.; Wiryana, I. M.
2016-06-01
Laplacian eigenbases are the important thing that we have to process from 3D mesh information. The information of geometric 3D mesh are include vertices locations and the connectivity of graph. Due to spectral analysis, geometric 3D mesh for large and sparse graphs with thousands of vertices is not practical to compute all the eigenvalues and eigenvector. Because of that, in this paper we discuss how to build 3D mesh reconstruction by reducing dimensionality on null eigenvalue but retain the corresponding eigenvector of Laplacian Embedding to simplify mesh processing. The result of reducing information should have to retained the connectivity of graph. The advantages of dimensionality reduction is for computational eficiency and problem simplification. Laplacian eigenbases is the point of dimensionality reduction for 3D mesh reconstruction. In this paper, we show how to reconstruct geometric 3D mesh after approximation step of 3D mesh by dimensionality reduction. Dimensionality reduction shown by Laplacian Embedding matrix. Furthermore, the effectiveness of 3D mesh reconstruction method will evaluated by geometric error, differential error, and final error. Numerical approximation error of our result are small and low complexity of computational.