WorldWideScience

Sample records for volume reduction technologies

  1. Electric and Magnetic Fields (EMF) RAPID Program Engineering Project 8: FINAL REPORT, Evaluation of Field Reduction Technologies, Volume 1 (Report) and Volume 2 (Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Commonwealth Associates, Inc.; IIT Research Institute

    1997-08-01

    This draft report consists of two volumes. Volume 1, the main body, contains an introducto~ sectionj an overview of magnetic fields sectio~ and field reduction technology evaluation section. Magnetic field reduction methods are evalpated for transmission lines, distribution Iines,sulxtations, building wiring applkmd machinery, and transportation systems. The evaluation considers effectiveness, co% and other ftiors. Volume 2 contains five appendices, Append~ A presents magnetic field shielding information. Appendices B and C present design assumptions and magnetic field plots for transmission and distribution lines, respectively. Appendices D and E present cost estimate details for transmission and distribution limes, respectively.

  2. Treatment of emphysema using bronchoscopic lung volume reduction coil technology : an update on efficacy and safety

    NARCIS (Netherlands)

    Hartman, Jorine E.; Klooster, Karin; ten Hacken, Nick H. T.; Slebos, Dirk-Jan

    2015-01-01

    In the last decade several promising bronchoscopic lung volume reduction (BLVR) treatments were developed and investigated. One of these treatments is BLVR treatment with coils. The advantage of this specific treatment is that it works independently of collateral flow, and also shows promise for pat

  3. Bronchoscopic lung volume reduction

    Directory of Open Access Journals (Sweden)

    M. I. Polkey

    2006-12-01

    Full Text Available Surgical lung volume reduction can improve exercise performance and forced expiratory volume in one second in patients with emphysema. However, the procedure is associated with a 5% mortality rate and a nonresponse rate of 25%. Accordingly, interest has focused on alternative ways of reducing lung volume. Two principle approaches are used: collapse of the diseased area using blockers placed endobronchially and the creation of extrapulmonary pathways. Preliminary data from the former approach suggest that it can be successful and that the magnitude of success is related to reduction in dynamic hyperinflation.

  4. New Reductive Desulfurization Technology

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The project for the research of the pulse plasma reductive desulfurization technology undertaken by Huazhong University of Science and Technology recently passed the research achievement appraisal in Wuhan, Hubei province.

  5. Design for volume reduction

    NARCIS (Netherlands)

    Wever, R.; Boks, C.; Stevels, A.

    2007-01-01

    Traditionally packaging design-for-sustainability (DfS) strongly focuses on resource conservation and material recycling. The type and amount of materials used has been the driver in design. For consumer electronics (CE) products this weight-based approach is too limited; a volume-based approach is

  6. Modern Chemical Technology, Volume 5.

    Science.gov (United States)

    Pecsok, Robert L., Ed.; Chapman, Kenneth, Ed.

    This volume contains chapters 26-31 for the American Chemical Society (ACS) "Modern Chemical Technology" (ChemTeC) instructional material intended to prepare chemical technologists. Chapter 26 reviews oxidation and reduction, including applications in titrations with potassium permanganate and iodometry. Coordination compounds are…

  7. Insular volume reduction in schizophrenia.

    Science.gov (United States)

    Saze, Teruyasu; Hirao, Kazuyuki; Namiki, Chihiro; Fukuyama, Hidenao; Hayashi, Takuji; Murai, Toshiya

    2007-12-01

    Structural and functional abnormalities of the insular cortex have been reported in patients with schizophrenia. Most studies have shown that the insular volumes in schizophrenia patients are smaller than those of healthy people. As the insular cortex is functio-anatomically divided into anterior and posterior subdivisons, recent research is focused on uncovering a specific subdivisional abnormality of the insula in patients with schizophrenia. A recent ROI-based volumetric MRI study demonstrated specific left anterior insular volume reduction in chronic schizophrenia patients (Makris N, Goldstein J, Kennedy D, Hodge S, Caviness V, Faraone S, Tsuang M, Seidman L (2006) Decreased volume of left and total anterior insular lobule in schizophrenia. Schizophr Res 83:155-171). On the other hand, our VBM-based volumetric study revealed a reduction in right posterior insular volume (Yamada M, Hirao K, Namiki C, Hanakawa T, Fukuyama H, Hayashi T, Murai T (2007) Social cognition and frontal lobe pathology in schizophrenia: a voxel-based morphometric study. NeuroImage 35:292-298). In order to address these controversial results, ROI-based subdivisional volumetry was performed using the MRI images from the same population we analyzed in our previous VBM-study. The sample group comprised 20 schizophrenia patients and 20 matched healthy controls. Patients with schizophrenia showed a global reduction in insular gray matter volumes relative to healthy comparison subjects. In a simple comparison of the volumes of each subdivision between the groups, a statistically significant volume reduction in patients with schizophrenia was demonstrated only in the right posterior insula. This study suggests that insular abnormalities in schizophrenia would include anterior as well as posterior parts. Each subdivisional abnormality may impact on different aspects of the pathophysiology and psychopathology of schizophrenia; these relationships should be the focus of future research.

  8. Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 1, Industrial solid waste processing municipal waste reduction/recycling

    Energy Technology Data Exchange (ETDEWEB)

    Lee, V.E. [ed.; Watts, R.L.

    1993-04-01

    This two-volume proceedings summarizes the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  9. Logistics Reduction Technologies for Exploration Missions

    Science.gov (United States)

    Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

    2014-01-01

    Human exploration missions under study are limited by the launch mass capacity of existing and planned launch vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Although mass is typically the focus of exploration missions, due to its strong impact on launch vehicle and habitable volume for the crew, logistics volume also needs to be considered. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing six logistics technologies guided by a systems engineering cradle-to-grave approach to enable after-use crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. Reduction of mass has a corresponding and significant impact to logistical volume. The reduction of logistical volume can reduce the overall pressurized vehicle mass directly, or indirectly benefit the mission by allowing for an increase in habitable volume during the mission. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as mission durations increase. Early studies have shown that the use of advanced logistics technologies can save approximately 20 m(sup 3) of volume during transit alone for a six-person Mars conjunction class mission.

  10. Exploration Mission Benefits From Logistics Reduction Technologies

    Science.gov (United States)

    Broyan, James Lee, Jr.; Schlesinger, Thilini; Ewert, Michael K.

    2016-01-01

    Technologies that reduce logistical mass, volume, and the crew time dedicated to logistics management become more important as exploration missions extend further from the Earth. Even modest reductions in logical mass can have a significant impact because it also reduces the packing burden. NASA's Advanced Exploration Systems' Logistics Reduction Project is developing technologies that can directly reduce the mass and volume of crew clothing and metabolic waste collection. Also, cargo bags have been developed that can be reconfigured for crew outfitting and trash processing technologies to increase habitable volume and improve protection against solar storm events are under development. Additionally, Mars class missions are sufficiently distant that even logistics management without resupply can be problematic due to the communication time delay with Earth. Although exploration vehicles are launched with all consumables and logistics in a defined configuration, the configuration continually changes as the mission progresses. Traditionally significant ground and crew time has been required to understand the evolving configuration and locate misplaced items. For key mission events and unplanned contingencies, the crew will not be able to rely on the ground for logistics localization assistance. NASA has been developing a radio frequency identification autonomous logistics management system to reduce crew time for general inventory and enable greater crew self-response to unplanned events when a wide range of items may need to be located in a very short time period. This paper provides a status of the technologies being developed and there mission benefits for exploration missions.

  11. Volume Reduction of Decommissioning Radioactive Burnable and Metal Wastes

    Energy Technology Data Exchange (ETDEWEB)

    Min, B. Y.; Lee, Y. J.; Yun, G. S.; Lee, K. W.; Moon, J. K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Choi, Y. K.; Cho, J. H. [SunKwang Atomic Energy Safety Co., Seoul (Korea, Republic of)

    2014-10-15

    A large quantity of radioactive waste was generated during the decommissioning projects. For the purpose of the volume reduction and clearance for decommissioning wastes from decommissioning projects, the incineration and high melting technology has been selected for the decommissioning wastes treatment. The volume reduction of the combustible wastes through the incineration technologies has merits from the view point of a decrease in the amount of waste to be disposed of resulting in a reduction of the disposal cost. Incineration is generally accepted as a method of reducing the volume of radioactive waste. The incineration technology is an effective treatment method that contains hazardous chemicals as well as radioactive contamination. Incinerator burns waste at high temperature. Incineration of a mixture of chemically hazardous and radioactive materials, known as 'mixed waste,' has two principal goals: to reduce the volume and total chemical toxicity of the waste. Incineration itself does not destroy the metals or reduce the radioactivity of the waste. A proven melting technology is currently used for low-level waste (LLW) at several facilities worldwide. These facilities use melting as a means of processing LLW for unrestricted release of the metal or for recycling within the nuclear sector. About 16.4 tons of decommissioning combustible waste has been treated using Oxygen Enriched incineration. The incineration facility operated quite smoothly through the analysis major critical parameters of off-gas.

  12. Carbon Dioxide Reduction Technology Trade Study

    Science.gov (United States)

    Jeng, Frank F.; Anderson, Molly S.; Abney, Morgan B.

    2011-01-01

    For long-term human missions, a closed-loop atmosphere revitalization system (ARS) is essential to minimize consumables. A carbon dioxide (CO2) reduction technology is used to reclaim oxygen (O2) from metabolic CO2 and is vital to reduce the delivery mass of metabolic O2. A key step in closing the loop for ARS will include a proper CO2 reduction subsystem that is reliable and with low equivalent system mass (ESM). Sabatier and Bosch CO2 reduction are two traditional CO2 reduction subsystems (CRS). Although a Sabatier CRS has been delivered to International Space Station (ISS) and is an important step toward closing the ISS ARS loop, it recovers only 50% of the available O2 in CO2. A Bosch CRS is able to reclaim all O2 in CO2. However, due to continuous carbon deposition on the catalyst surface, the penalties of replacing spent catalysts and reactors and crew time in a Bosch CRS are significant. Recently, technologies have been developed for recovering hydrogen (H2) from Sabatier-product methane (CH4). These include methane pyrolysis using a microwave plasma, catalytic thermal pyrolysis of CH4 and thermal pyrolysis of CH4. Further, development in Sabatier reactor designs based on microchannel and microlith technology could open up opportunities in reducing system mass and enhancing system control. Improvements in Bosch CRS conversion have also been reported. In addition, co-electrolysis of steam and CO2 is a new technology that integrates oxygen generation and CO2 reduction functions in a single system. A co-electrolysis unit followed by either a Sabatier or a carbon formation reactor based on Bosch chemistry could improve the overall competitiveness of an integrated O2 generation and CO2 reduction subsystem. This study evaluates all these CO2 reduction technologies, conducts water mass balances for required external supply of water for 1-, 5- and 10-yr missions, evaluates mass, volume, power, cooling and resupply requirements of various technologies. A system

  13. Brain volume reductions in adolescent heavy drinkers.

    Science.gov (United States)

    Squeglia, Lindsay M; Rinker, Daniel A; Bartsch, Hauke; Castro, Norma; Chung, Yoonho; Dale, Anders M; Jernigan, Terry L; Tapert, Susan F

    2014-07-01

    Brain abnormalities in adolescent heavy drinkers may result from alcohol exposure, or stem from pre-existing neural features. This longitudinal morphometric study investigated 40 healthy adolescents, ages 12-17 at study entry, half of whom (n=20) initiated heavy drinking over the 3-year follow-up. Both assessments included high-resolution magnetic resonance imaging. FreeSurfer was used to segment brain volumes, which were measured longitudinally using the newly developed quantitative anatomic regional change analysis (QUARC) tool. At baseline, participants who later transitioned into heavy drinking showed smaller left cingulate, pars triangularis, and rostral anterior cingulate volume, and less right cerebellar white matter volumes (pteens. Over time, participants who initiated heavy drinking showed significantly greater volume reduction in the left ventral diencephalon, left inferior and middle temporal gyrus, and left caudate and brain stem, compared to substance-naïve youth (pbrain regions in future drinkers and greater brain volume reduction in subcortical and temporal regions after alcohol use was initiated. This is consistent with literature showing pre-existing cognitive deficits on tasks recruited by frontal regions, as well as post-drinking consequences on brain regions involved in language and spatial tasks. Published by Elsevier Ltd.

  14. Volume reduction philosophy and techniques in use or planned

    Energy Technology Data Exchange (ETDEWEB)

    Row, T.H.

    1984-01-01

    Siting and development of nuclear waste disposal facilities is an expensive task. In the private sector, such developments face siting and licensing issues, public intervention, and technology challenges. The United States Department of Energy (DOE) faces similar challenges in the management of waste generated by the research and production facilities. Volume reduction can be used to lengthen the service life of existing facilities. A wide variety of volume reduction techniques are applied to different waste forms. Compressible waste is compacted into drums, cardboard and metal boxes, and the loaded drums are supercompacted into smaller units. Large metallic items are size-reduced and melted for recycle or sent to shallow land burial. Anaerobic digestion is a process that can reduce cellulosic and animal wastes by 80%. Incinerators of all types have been investigated for application to nuclear wastes and a number of installations operate or are constructing units for low-level and transuranic solid and liquid combustibles. Technology may help solve many of the problems in volume reduction, but the human element also has an important part in solving the puzzle. Aggressive educational campaigns at two sites have proved very successful in reducing waste generation. This overview of volume reduction is intended to transfer the current information from many DOE facilities. 44 references, 85 figures, 5 tables.

  15. Mission Benefits Analysis of Logistics Reduction Technologies

    Science.gov (United States)

    Ewert, Michael K.; Broyan, James Lee, Jr.

    2013-01-01

    Future space exploration missions will need to use less logistical supplies if humans are to live for longer periods away from our home planet. Anything that can be done to reduce initial mass and volume of supplies or reuse or recycle items that have been launched will be very valuable. Reuse and recycling also reduce the trash burden and associated nuisances, such as smell, but require good systems engineering and operations integration to reap the greatest benefits. A systems analysis was conducted to quantify the mass and volume savings of four different technologies currently under development by NASA s Advanced Exploration Systems (AES) Logistics Reduction and Repurposing project. Advanced clothing systems lead to savings by direct mass reduction and increased wear duration. Reuse of logistical items, such as packaging, for a second purpose allows fewer items to be launched. A device known as a heat melt compactor drastically reduces the volume of trash, recovers water and produces a stable tile that can be used instead of launching additional radiation protection. The fourth technology, called trash-to-gas, can benefit a mission by supplying fuel such as methane to the propulsion system. This systems engineering work will help improve logistics planning and overall mission architectures by determining the most effective use, and reuse, of all resources.

  16. Stabilization and volume reduction of radioactive spent ionexchange resins

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Stabilization and volume reduction of spent radioactive ion-exchange resins (IERs)were studied. Stabilization technology includes volume reduction with wet chemicaloxidation process and immobilization of the residue into cement. Undersuitable conditions, the exhaustedradioactive ion-exchange resins were dissolved successfully in aH2O2-Fe2+/Cu2+ catalytic oxidationsystem (Fenton reagent). The analytical results indicated that the radioactive nuclides loaded in the resins were concentrated in decomposed solution and solid residues. The process parameters ofwet chemical oxidation and solidification were also obtained. Thedecomposition ratios were 100%and more than 90% for cation and anion IERs respectively. The waste volume was decreased by40% compared with that of original spent resins.

  17. 秦山核电基地放射性废物减容技术研究%Research on Radioactive Waste Volume Reduction Technology in Qinshan Nuclear Power Base

    Institute of Scientific and Technical Information of China (English)

    康云鼎

    2012-01-01

    分析秦山核电基地放射性废物的现状及其处理与贮存方式,主要研究针对蒸残液固化物、可压缩废物和废树脂3类产生量较大的固体废物的减容技术.研究表明秦山核电基地的放射性废物还有很大的减容空间,并提出增加秦山核电基地固体废物贮存时间5a以上的减容方案,可有效缓解废物贮存库容的压力.%The paper analyzes the present situation of radioactive wastes in Qinshan nuclear power base and its processing and storage, and focuses on the volume reduction technology for large number of solid wastes including steamed residual liquid condensates, compressible waste and waste resin. Research shows that there is great potential for volume reduction of radioactive wastes in Qinshan nuclear power base, and the volume reduction scheme is provided. With the proposed scheme, the storage capacity for solid wastes in Qinshan nuclear power base can be increased by more than 5 years, which will effectively relieve the pressure for waste storage capacity.

  18. FY02 Engineering Technology Reports Volume 1: Technology Base

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; Meeker, D

    2003-01-28

    Engineering has touched on every challenge, every accomplishment, and every endeavor of Lawrence Livermore National Laboratory during its fifty-year history. In this time of transition to new leadership, Engineering continues to be central to the mission of the Laboratory, returning to the tradition and core values of E. O. Lawrence: science-based engineering--turning scientific concepts into reality. This volume of Engineering Technical Reports summarizes progress on the projects funded for technology-base efforts. Technology-base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. Objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) the support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; and (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships. Five Centers focus and guide longer-term investments within Engineering. The Centers attract and retain top staff, develop and maintain critical core technologies, and enable programs. Through their technology-base projects, they oversee the application of known engineering approaches and techniques to scientific and technical problems.

  19. Engineering Technology Reports, Volume 2: Technology Base FY01

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; Meeker, D

    2002-07-01

    Engineering has touched on every challenge, every accomplishment, and every endeavor of Lawrence Livermore National Laboratory during its fifty-year history. In this time of transition to new leadership, Engineering continues to be central to the mission of the Laboratory, returning to the tradition and core values of E.O. Lawrence: science-based engineering--turning scientific concepts into reality. This volume of Engineering Technical Reports summarizes progress on the projects funded for technology-base efforts. Technology-base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. Objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) the support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships.

  20. Exponential reduction of finite volume effects with twisted boundary conditions

    CERN Document Server

    Cherman, Aleksey; Wagman, Michael L; Yaffe, Laurence G

    2016-01-01

    Flavor-twisted boundary conditions can be used for exponential reduction of finite volume artifacts in flavor-averaged observables in lattice QCD calculations with $SU(N_f)$ light quark flavor symmetry. Finite volume artifact reduction arises from destructive interference effects in a manner closely related to the phase averaging which leads to large $N_c$ volume independence. With a particular choice of flavor-twisted boundary conditions, finite volume artifacts for flavor-singlet observables in a hypercubic spacetime volume are reduced to the size of finite volume artifacts in a spacetime volume with periodic boundary conditions that is four times larger.

  1. Update on Nonsurgical Lung Volume Reduction Procedures

    Directory of Open Access Journals (Sweden)

    J. Alberto Neder

    2016-01-01

    Full Text Available There has been a surge of interest in endoscopic lung volume reduction (ELVR strategies for advanced COPD. Valve implants, coil implants, biological LVR (BioLVR, bronchial thermal vapour ablation, and airway stents are used to induce lung deflation with the ultimate goal of improving respiratory mechanics and chronic dyspnea. Patients presenting with severe air trapping (e.g., inspiratory capacity/total lung capacity (TLC 225% predicted and thoracic hyperinflation (TLC > 150% predicted have the greatest potential to derive benefit from ELVR procedures. Pre-LVRS or ELVR assessment should ideally include cardiological evaluation, high resolution CT scan, ventilation and perfusion scintigraphy, full pulmonary function tests, and cardiopulmonary exercise testing. ELVR procedures are currently available in selected Canadian research centers as part of ethically approved clinical trials. If a decision is made to offer an ELVR procedure, one-way valves are the first option in the presence of complete lobar exclusion and no significant collateral ventilation. When the fissure is not complete, when collateral ventilation is evident in heterogeneous emphysema or when emphysema is homogeneous, coil implants or BioLVR (in that order are the next logical alternatives.

  2. Sequential unilateral lung volume reduction for emphysema - Stretching the benefit.

    Science.gov (United States)

    Khorramnia, Sadie; Holsworth, Lynda; Mestitz, Hugh; Westall, Glen P; Williams, Trevor J; Gooi, Julian H; Snell, Gregory I

    2017-01-01

    Bronchoscopic Lung Volume Reduction (BLVR) and Surgical Lung Volume Reduction (SLVR) and are two different approaches used to remodel severely emphysematous lungs to improve lung function and quality-of-life. We present a case initially referred for lung transplantation, where sequential left upper lobe BLVR and 7 years later right upper lobe SLVR, providing enduring physiological and functional improvement. The potential for sustained benefit via sequential unilateral lung volume reduction is under-appreciated.

  3. Effect of advanced aircraft noise reduction technology on the 1990 projected noise environment around Patrick Henry Airport. [development of noise exposure forecast contours for projected traffic volume and aircraft types

    Science.gov (United States)

    Cawthorn, J. M.; Brown, C. G.

    1974-01-01

    A study has been conducted of the future noise environment of Patric Henry Airport and its neighboring communities projected for the year 1990. An assessment was made of the impact of advanced noise reduction technologies which are currently being considered. These advanced technologies include a two-segment landing approach procedure and aircraft hardware modifications or retrofits which would add sound absorbent material in the nacelles of the engines or which would replace the present two- and three-stage fans with a single-stage fan of larger diameter. Noise Exposure Forecast (NEF) contours were computed for the baseline (nonretrofitted) aircraft for the projected traffic volume and fleet mix for the year 1990. These NEF contours are presented along with contours for a variety of retrofit options. Comparisons of the baseline with the noise reduction options are given in terms of total land area exposed to 30 and 40 NEF levels. Results are also presented of the effects on noise exposure area of the total number of daily operations.

  4. October 2015 Phoenix pulmonary journal club: lung volume reduction

    Directory of Open Access Journals (Sweden)

    Mathew M

    2015-11-01

    Full Text Available No abstract available. Article truncated at 150 words. The October 2015 pulmonary journal club focused on the review of older studies evaluating lung volume reduction surgery and how this has transitioned toward the development of non-surgical modes of lung volume reduction. The physiology behind dyspnea in chronic obstructive pulmonary disease (COPD is a complex process. One of the proposed mechanisms has been hyperinflation associated with air trapping. In the mid 1990s studies by Cooper and Peterson (1 offered a promising approach in which lung volume reduction (LVR could improve ventilatory mechanics and improve dyspnea. As the procedure gained more popularity, additional larger scale trials were performed to support its validity. We reviewed 2 studies looking at lung volume reduction. The first was "The Effect of Lung Volume Reduction Surgery In Patients With Severe Emphysema” (2 . This was a smaller, randomized controlled trial (RCT that looked at 2 groups of 24 patients. Once group received LVR while the ...

  5. Aerospace Technology Innovation. Volume 9

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor)

    2001-01-01

    Commercializing technology is a daunting task. Of every 11 new product ideas, only one will successfully make it to the marketplace. Fully 46% of new product investment becomes sunk in cost. Yet, a few good companies consistently attain an 80% technology commercialization success rate and have lead the way in establishing best practices. The NASA Incubator program consists of nine incubators, each residing near a NASA research center. The purpose of the incubators is to use the best practices is to use the best practices of technology commercialization to help early stage businesses successfully launch new products that incorporate NASA technology.

  6. Modern Chemical Technology, Volume 9.

    Science.gov (United States)

    Pecsok, Robert L.; Chapman, Kenneth

    This volume is one of the series for the Chemical Technician Curriculum Project (ChemTeC) of the American Chemical Society funded by the National Science Foundation. It consists of discussions, exercises, and experiments on the following topics: ion exchange, electrphoresis, dialysis, electrochemistry, corrosion, electrolytic cells, coulometry,…

  7. Technology transfer package on seismic base isolation - Volume III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume III contains supporting materials not included in Volumes I and II.

  8. Predictors of prostate volume reduction following neoadjuvant cytoreductive androgen suppression

    Directory of Open Access Journals (Sweden)

    Krishan R. Jethwa

    2016-11-01

    Full Text Available Purpose: Limited duration cytoreductive neoadjuvant hormonal therapy (NHT is used prior to definitive radiotherapeutic management of prostate cancer to decrease prostate volume. The purpose of this study is to examine the effect of NHT on prostate volume before permanent prostate brachytherapy (PPB, and determine associated predictive factors. Material and methods : Between June 1998 and April 2012, a total of 1,110 patients underwent PPB and 207 patients underwent NHT. Of these, 189 (91.3% underwent detailed planimetric transrectal ultrasound before and after NHT prior to PPB. Regression analysis was used to assess predictors of absolute and percentage change in prostate volume after NHT. Results: The median duration of NHT was 4.9 months with inter quartile range (IQR, 4.2-6.6 months. Prostate-specific antigen (PSA reduced by a median of 97% following NHT. The mean prostate volume before NHT was 62.5 ± 22.1 cm 3 (IQR: 46-76 cm 3 , and after NHT, it was 37.0 ± 14.5 cm 3 (IQR: 29-47 cm 3 . The mean prostate volume reduction was 23.4 cm 3 (35.9%. Absolute prostate volume reduction was positively correlated with initial volume and inversely correlated with T-stage, Gleason score, and NCCN risk group. In multivariate regression analyses, initial prostate volume (p < 0.001 remained as a significant predictor of absolute and percent prostate volume reduction. Total androgen suppression was associated with greater percent prostate volume reduction than luteinizing hormone releasing hormone agonist (LHRHa alone (p = 0.001. Conclusions : Prostate volume decreased by approximately one third after 4.9 months of NHT, with total androgen suppression found to be more efficacious in maximizing cytoreduction than LHRHa alone. Initial prostate volume is the greatest predictor for prostate volume reduction.

  9. Volume reduction through perturbative Wilson loops

    CERN Document Server

    Perez, Margarita Garcia; Okawa, Masanori

    2016-01-01

    We derive the perturbative expansion of Wilson loops to order g^4 in a SU(N) lattice gauge theory with twisted boundary conditions. Our expressions show that the thermodynamic limit is attained at infinite N for any number of lattice sites and allow to quantify the deviations from volume independence at finite large N as a function of the twist.

  10. Aerospace Technology Innovation. Volume 10

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor); Bennett, Evonne (Editor); Vendette, Joel (Editor); West, Kenyon (Editor)

    2002-01-01

    Whether finding new applications for existing NASA technologies or developing unique marketing strategies to demonstrate them, NASA's offices are committed to identifying unique partnering opportunities. Through their efforts NASA leverages resources through joint research and development, and gains new insight into the core areas relevant to all NASA field centers. One of the most satisfying aspects of my job comes when I learn of a mission-driven technology that can be spun-off to touch the lives of everyday people. NASA's New Partnerships in Medical Diagnostic Imaging is one such initiative. Not only does it promise to provide greater dividends for the country's investment in aerospace research, but also to enhance the American quality of life. This issue of Innovation highlights the new NASA-sponsored initiative in medical imaging. Early in 2001, NASA announced the launch of the New Partnerships in Medical Diagnostic Imaging initiative to promote the partnership and commercialization of NASA technologies in the medical imaging industry. NASA and the medical imaging industry share a number of crosscutting technologies in areas such as high-performance detectors and image-processing tools. Many of the opportunities for joint development and technology transfer to the medical imaging market also hold the promise for future spin back to NASA.

  11. Disc volume reduction with percutaneous nucleoplasty in an animal model.

    Directory of Open Access Journals (Sweden)

    Richard Kasch

    Full Text Available STUDY DESIGN: We assessed volume following nucleoplasty disc decompression in lower lumbar spines from cadaveric pigs using 7.1Tesla magnetic resonance imaging (MRI. PURPOSE: To investigate coblation-induced volume reductions as a possible mechanism underlying nucleoplasty. METHODS: We assessed volume following nucleoplastic disc decompression in pig spines using 7.1-Tesla MRI. Volumetry was performed in lumbar discs of 21 postmortem pigs. A preoperative image data set was obtained, volume was determined, and either disc decompression or placebo therapy was performed in a randomized manner. Group 1 (nucleoplasty group was treated according to the usual nucleoplasty protocol with coblation current applied to 6 channels for 10 seconds each in an application field of 360°; in group 2 (placebo group the same procedure was performed but without coblation current. After the procedure, a second data set was generated and volumes calculated and matched with the preoperative measurements in a blinded manner. To analyze the effectiveness of nucleoplasty, volumes between treatment and placebo groups were compared. RESULTS: The average preoperative nucleus volume was 0.994 ml (SD: 0.298 ml. In the nucleoplasty group (n = 21 volume was reduced by an average of 0.087 ml (SD: 0.110 ml or 7.14%. In the placebo group (n = 21 volume was increased by an average of 0.075 ml (SD: 0.075 ml or 8.94%. The average nucleoplasty-induced volume reduction was 0.162 ml (SD: 0.124 ml or 16.08%. Volume reduction in lumbar discs was significant in favor of the nucleoplasty group (p<0.0001. CONCLUSIONS: Our study demonstrates that nucleoplasty has a volume-reducing effect on the lumbar nucleus pulposus in an animal model. Furthermore, we show the volume reduction to be a coblation effect of nucleoplasty in porcine discs.

  12. Innovative Clean Coal Technology (ICCT). Demonstration of Selective Catalytic Reduction (SCR) technology for the control of nitrogen oxide (NO{sub x}) emissions from high-sulfur coal-fired boilers: Volume 1. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from U.S., Japanese and European catalyst suppliers on a high-sulfur U.S. coal-fired boiler. SCR is a post-combustion nitrogen oxide (NO.) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NO. to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur coal- fired boilers, there are several technical uncertainties associated with applying SCR to U.S. coals. These uncertainties include: 1) potential catalyst deactivation due to poisoning by trace metal species present in U.S. coals that are not present in other fuels. 2) performance of the technology and effects on the balance-of- plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}. 3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacturer under typical high-sulfur coal-fired utility operating conditions. These uncertainties were explored by operating nine small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur U.S. coal. In addition, the test facility operating experience provided a basis for an economic study investigating the implementation of SCR technology.

  13. Reduction of residual limb volume in people with transtibial amputation

    Directory of Open Access Journals (Sweden)

    Audrey T. Tantua, MD

    2014-11-01

    Full Text Available The early postoperative phase after transtibial amputation is characterized by rapid residual limb volume reduction. Accurate measurement of residual limb volume is important for the timing of fitting a prosthesis. The aim of this study was to analyze the reduction of residual limb volume in people with transtibial amputation and to correlate residual limb volume with residual limb circumference. In a longitudinal cohort study of 21 people who had a transtibial amputation, residual limb volume was measured using a laser scanner and circumference was measured using a tape measure 1 wk postamputation and every 3 wk thereafter until 24 wk postamputation. A linear mixed model analysis was performed with weeks postamputation transformed according to the natural logarithm as predictor. Residual limb volume decreased significantly over time, with a large variation between patients. Residual limb volume did not correlate well with circumference. On average, residual limb volume decreased 200.5 mL (9.7% of the initial volume per natural logarithm of the weeks postamputation. The decrease in residual limb volume following a transtibial amputation was substantial in the early postamputation phase, followed by a leveling off. It was not possible to determine the specific moment at which the residual limb volume stabilized.

  14. Coal slurry combustion and technology. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Volume II contains papers presented at the following sessions of the Coal Slurry Combustion and Technology Symposium: (1) bench-scale testing; (2) pilot testing; (3) combustion; and (4) rheology and characterization. Thirty-three papers have been processed for inclusion in the Energy Data Base. (ATT)

  15. Cement plant gaseous pollutant emission reduction technologies

    Directory of Open Access Journals (Sweden)

    Andrés Emilio Hoyos Barreto

    2010-10-01

    Full Text Available A brief description of SOX, NOX and CO2 formation is presented, these being the main pollutants emitted in the cement industry gas stream Several technologies for reducing NOX, SOX and CO2 emissions in long wet kilns are introduced: primary measures preventing contaminant formation and secondary/tube end emission reduction measures. Strategies for preventing CO2 (green-house effect gas formation are also addressed, such as fuel and raw material substitution and CO2 capture technologies which are still being developed.

  16. Computer vision technology in log volume inspection

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Log volume inspection is very important in forestry research and paper making engineering. This paper proposed a novel approach based on computer vision technology to cope with log volume inspection. The needed hardware system was analyzed and the details of the inspection algorithms were given. A fuzzy entropy based on image enhancement algorithm was presented for enhancing the image of the cross-section of log. In many practical applications the cross-section is often partially invisible, and this is the major obstacle for correct inspection. To solve this problem, a robust Hausdorff distance method was proposed to recover the whole cross-section. Experiment results showed that this method was efficient.

  17. Innovative Clean Coal Technology (ICCT). Demonstration of Selective Catalytic Reduction (SCR) technology for the control of nitrogen oxide (NO{sub x}) emissions from high-sulfur coal-fired boilers: Volume 3, Appendices O--T. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    Volume 3 contains the following appendices: Appendix O, Second Series-Manual APH Tests; Appendix P, Third Series-Manual APH Tests; Appendix Q, ABB Analysis of Air Preheaters-Final Report; Appendix R, ABB Corrosion Analysis Study; Appendix S, SRI Waste Stream Impacts Study; and Appendix T, Economic Evaluation.

  18. Compendium of Practical Astronomy. Volume 1: Instrumentation and Reduction Techniques.

    Science.gov (United States)

    Augensen, H. J.; Heintz, W. D.; Roth, Günter D.

    The Compendium of Practical Astronomy is a revised and enlarged English version of the fourth edition of G. Roth's famous handbook for stargazers. In three volumes 28 carefully edited articles, aimed especially at amateur astronomers and students and teachers of astronomy in high schools and colleges, cover the length and breadth of practical astronomy. Volume 1 contains information on modern instrumentation and reduction techniques, including spherical astronomy, error estimations, telescope mountings, astrophotography, and more. Volume 2 covers the planetary system, with contributions on artificial satellites, comets, the polar aurorae, and the effects of the atmosphere on observational data. Volume 3 is devoted to stellar objects, variable stars and binary stars in particular. An introduction to the astronomical literature and a comprehensive chapter on astronomy education and instructional aids make the Compendium a useful complement to any college library, in addition to its being essential reading for all practical astronomers.

  19. Vibration Reduction System Using Magnetic Suspension Technology

    Directory of Open Access Journals (Sweden)

    Spychała Jarosław

    2015-01-01

    Full Text Available The article presents considerations concerning the construction of vibration reduction system using magnetic suspension technology. Presents the results of simulation, numerical and experimental the bearingless electric motor, for which successfully used this type of solution. Positive results of research and testing have become the basis for the development of the concept of building this type of active vibration reduction system , at the same time acting as a support for a technical object, which is a jet engine. Bearing failures are manifested by loss or distortion of their mass, which leads to a total destruction of the roller bearing, and thus reflected in the security. The article presents the concept of building active magnetic suspension to eliminate the bearing system of classical rolling bearing and replace it with magnetic bearing.

  20. Endobronchial Valves for Endoscopic Lung Volume Reduction : Best Practice Recommendations from Expert Panel on Endoscopic Lung Volume Reduction

    NARCIS (Netherlands)

    Slebos, Dirk-Jan; Herth, Felix J F; Valipour, Arschang

    2016-01-01

    Endoscopic lung volume reduction (ELVR) is being adopted as a treatment option for carefully selected patients suffering from severe emphysema. ELVR with the one-way endobronchial Zephyr valves (EBV) has been demonstrated to improve pulmonary function, exercise capacity, and quality of life in patie

  1. Innovative Clean Coal Technology (ICCT). Demonstration of Selective Catalytic Reduction (SCR) technology for the control of nitrogen oxide (NO{sub x}) emissions from high-sulfur coal-fired boilers: Volume 2, Appendices A--N. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    Volume 2 contains the following appendices: Appendix A, Example Material Safety Data Sheet; Appendix B, Initial Site Characterization Test Results; Appendix C, Testing Proposal, Southern Research Institute; Appendix D, Example Laboratory Catalyst Test Protocol; Appendix E, Detailed Coal Analysis Data; Appendix F, Standard Methods-QA/QC Document; Appendix G, Task No. 1 Commissioning Tests; Appendix H, Task No. 2 Commissioning Tests; Appendix I, First Parametric Sequence Spreadsheets; Appendix J, Second Parametric Sequence Spreadsheets; Appendix K, Third Parametric Sequence Spreadsheets; Appendix L, Fourth Parametric Sequence Spreadsheets; Appendix M, Fifth Parametric Sequence Spreadsheets; and Appendix N, First Series-Manual APH Tests.

  2. Accurate monitoring of intravascular fluid volume: A novel application of intrathoracic impedance measures for the guidance of volume reduction therapy

    Directory of Open Access Journals (Sweden)

    Barbara A. Lara

    2015-09-01

    Conclusion: Impedance vectors derived from a multivector monitoring system reflect changes in intravascular plasma volume. Two of these vectors most closely track changes in plasma volume and may be used to more accurately guide and optimize volume reduction therapy.

  3. Integrated diesel engine NOx reduction technology development

    Energy Technology Data Exchange (ETDEWEB)

    Hoelzer, J.; Zhu, J.; Savonen, C.L. [Detroit Diesel Corp., MI (United States); Kharas, K.C.C.; Bailey, O.H.; Miller, M.; Vuichard, J. [Allied Signal Environmental Catalysts, Tulsa, OK (United States)

    1997-12-31

    The effectiveness of catalyst performance is a function of the inlet exhaust gas temperature, gas flow rate, concentration of NO{sub x} and oxygen, and reductant quantity and species. Given this interrelationship, it becomes immediately clear that an integrated development approach is necessary. Such an approach is taken in this project. As such, the system development path is directed by an engine-catalyst engineering team. Of the tools at the engine engineer`s disposal the real-time aspects of computer assisted subsystem modeling is valuable. It will continue to be the case as ever more subtle improvements are needed to meet competitive performance, durability, and emission challenges. A review of recent prototype engines has shown that considerable improvements to base diesel engine technology are being made. For example, HSDI NO{sub x} has been reduced by a factor of two within the past ten years. However, additional substantial NO{sub x}/PM reduction is still required for the future. A viable lean NO{sub x} catalyst would be an attractive solution to this end. The results of recent high and low temperature catalyst developments were presented. High temperature base metal catalysts have been formulated to produce very good conversion efficiency and good thermal stability, albeit at temperatures near the upper range of diesel engine operation. Low temperature noble metal catalysts have been developed to provide performance of promising 4-way control but need increased NO{sub x} reduction efficiency.

  4. Particle size separation via soil washing to obtain volume reduction.

    Science.gov (United States)

    Anderson, R; Rasor, E; Van Ryn, F

    1999-04-23

    A pilot-plant study was performed using a soil washing pilot plant originally designed by the Environmental Protection Agency (EPA) to demonstrate scale-up and potential full-scale remediation. This pilot plant named VORCE (Volume Reduction/Chemical Extraction) was modified to meet the specific requirements for treatment of the Formerly Utilized Sites Remedial Action Program (FUSRAP) and a Department of Energy site soils. After a series of tests on clean soils to develop operating parameters and system performance, the machine was used to treat soils, one contaminated with Thorium-232 and the other with Cesium-137. All indicate that soil washing is very promising for volume reduction treatment. In addition, cost data was generated and is given herein.

  5. The Space Technology 7 Disturbance Reduction System

    Science.gov (United States)

    O'Donnell, J. R., Jr.; Hsu, O. C.; Hanson, J.; Hruby, V.

    The Space Technology 7 Disturbance Reduction System (DRS) is an in-space technology demonstration designed to validate technologies that are required for future missions such as the Laser Interferometer Space Antenna (LISA) and the Micro-Arcsecond X-ray Imaging Mission (MAXIM). The primary sensors that will be used by DRS are two Gravitational Reference Sensors (GRSs) being developed by Stanford University. DRS will control the spacecraft so that it flies about one of the freely-floating Gravitational Reference Sensor test masses, keeping it centered within its housing. The other GRS serves as a cross-reference for the first as well as being used as a reference for the spacecraft's attitude control. Colloidal MicroNewton Thrusters being developed by the Busek Co. will be used to control the spacecraft's position and attitude using a six degree-of-freedom Dynamic Control System being developed by Goddard Space Flight Center. A laser interferometer being built by the Jet Propulsion Laboratory will be used to help validate the results of the experiment. The DRS will be launched in 2008 on the European Space Agency (ESA) LISA Pathfinder spacecraft along with a similar ESA experiment, the LISA Test Package.

  6. Technology transfer package on seismic base isolation - Volume II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume II contains the proceedings for the Short Course on Seismic Base Isolation held in Berkeley, California, August 10-14, 1992.

  7. Technology transfer package on seismic base isolation - Volume I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume I contains the proceedings of the Workshop on Seismic Base Isolation for Department of Energy Facilities held in Marina Del Rey, California, May 13-15, 1992.

  8. Large Nc volume reduction and chiral random matrix theory

    CERN Document Server

    Lee, Jong-Wan; Yamada, Norikazu

    2013-01-01

    Motivated by recent progress on the understanding of the Eguchi-Kawai (EK) volume equivalence and growing interest in conformal window, we simultaneously use the large-Nc volume reduction and Chiral Random Matrix Theory (chRMT) to study the chiral symmetry breaking of four dimensional SU(Nc) gauge theory with adjoint fermions in the large Nc limit. Although some cares are required because the chRMT limit and 't Hooft limit are not compatible in general, we show that the breakdown of the chiral symmetry can be detected in large-Nc gauge theories. As a first step, we mainly focus on the quenched approximation to establish the methodology. We first confirm that heavy adjoint fermions, introduced as the center symmetry preserver, work as expected and thanks to them the volume reduction holds. Using massless overlap fermion as a probe, we then calculate the low-lying Dirac spectrum for fermion in the adjoint representation to compare to that of chRMT, and find that chiral symmetry is indeed broken in the quenched ...

  9. Hippocampal volume reduction in congenital central hypoventilation syndrome.

    Directory of Open Access Journals (Sweden)

    Paul M Macey

    Full Text Available Children with congenital central hypoventilation syndrome (CCHS, a genetic disorder characterized by diminished drive to breathe during sleep and impaired CO(2 sensitivity, show brain structural and functional changes on magnetic resonance imaging (MRI scans, with impaired responses in specific hippocampal regions, suggesting localized injury.We assessed total volume and regional variation in hippocampal surface morphology to identify areas affected in the syndrome. We studied 18 CCHS (mean age+/-std: 15.1+/-2.2 years; 8 female and 32 healthy control (age 15.2+/-2.4 years; 14 female children, and traced hippocampi on 1 mm(3 resolution T1-weighted scans, collected with a 3.0 Tesla MRI scanner. Regional hippocampal volume variations, adjusted for cranial volume, were compared between groups based on t-tests of surface distances to the structure midline, with correction for multiple comparisons. Significant tissue losses emerged in CCHS patients on the left side, with a trend for loss on the right; however, most areas affected on the left also showed equivalent right-sided volume reductions. Reduced regional volumes appeared in the left rostral hippocampus, bilateral areas in mid and mid-to-caudal regions, and a dorsal-caudal region, adjacent to the fimbria.The volume losses may result from hypoxic exposure following hypoventilation during sleep-disordered breathing, or from developmental or vascular consequences of genetic mutations in the syndrome. The sites of change overlap regions of abnormal functional responses to respiratory and autonomic challenges. Affected hippocampal areas have roles associated with memory, mood, and indirectly, autonomic regulation; impairments in these behavioral and physiological functions appear in CCHS.

  10. A CASE STUDY OF BRAIN VOLUME REDUCTION IN MULTIPLE SCLEROSIS

    Directory of Open Access Journals (Sweden)

    Ivan N. Dimitrov

    2013-07-01

    Full Text Available The development of sophisticated magnetic resonance imaging techniques and software for medical imaging processing and analysis has led to a significant progress in multiple sclerosis research and clinical care. The measurement of brain volumes provides a quantitative representation of damage, thus facilitating the objective follow-up process. The parameters obtained, though not being used routinely in clinical practice, are more and more often applied in clinical studies. The amount of whole brain and regional atrophy, estimated from serial scans, is considered important not only for disease progression, but also for cognitive dysfunction which is common in multiple sclerosis. In this paper we describe a volumetric study of two magnetic resonance scans of a patient with relapsing-remitting multiple sclerosis, performed 16 months one after the other, and analyzed using FSL SIENA software. Analysis demonstrated brain volume reduction of 1.7% between the two scans. We discuss the advantages of the method and its possible clinical applications.

  11. Information and Communication Technology for Poverty Reduction

    Directory of Open Access Journals (Sweden)

    Motilal SHARMA

    2005-04-01

    Full Text Available It has been estimated that over 700 million of the world's poor live in Asia-Pacifiui region i.e., those who earn $1 or less a day. Nearly one of three Asians is poor. It is claimed by multilateral agencies that the incidence of poverty (proportion of people below the poverty line is slightly declining. Others question this claim and argue that the term poor should cover all those who cannot cope with survival, security, and enabling needs. If one were to apply this comprehensive definition of poverty, the poor certainly account for more than 900 million in this region. The poor experience shortfalls in economic welfare; gaps in access to good quality education and health care; deficiencies in the provision of physical infrastructure; and political barriers that stifle personal initiative and self-development. They are unable to participate in governance, which is necessary for a healthy democracy and peaceful development. The poverty encourages corruption, anti-social activities like drugs, smuggling, prostitution, and all sorts of deviant behavior. Poverty is considered an unacceptable human condition Moreover, despite the vast advances that are being made in the spheres of science and technology, information and communication technology(ICT , medicine, capital mobility, etc., income disparities are ever widening, both within countries and nations – world's rich and poor nations. The trends in poverty reduction have recently worsened. The population growth in the developing countries is also adding to absolute number of poor. Overcoming poverty therefore remains the single most important challenge facing those involved in the development activities. It has been recognized by all multilateral and bilateral donors involved in development assistance that expected outcomes could not be achieved in the area of poverty reduction. Poverty constrains implementation of development initiatives because the poor (the beneficiaries are not able to

  12. Low cost biological lung volume reduction therapy for advanced emphysema

    Directory of Open Access Journals (Sweden)

    Bakeer M

    2016-08-01

    Full Text Available Mostafa Bakeer,1 Taha Taha Abdelgawad,1 Raed El-Metwaly,1 Ahmed El-Morsi,1 Mohammad Khairy El-Badrawy,1 Solafa El-Sharawy2 1Chest Medicine Department, 2Clinical Pathology Department, Faculty of Medicine, Mansoura University, Mansoura, Egypt Background: Bronchoscopic lung volume reduction (BLVR, using biological agents, is one of the new alternatives to lung volume reduction surgery.Objectives: To evaluate efficacy and safety of biological BLVR using low cost agents including autologous blood and fibrin glue.Methods: Enrolled patients were divided into two groups: group A (seven patients in which autologous blood was used and group B (eight patients in which fibrin glue was used. The agents were injected through a triple lumen balloon catheter via fiberoptic bronchoscope. Changes in high resolution computerized tomography (HRCT volumetry, pulmonary function tests, symptoms, and exercise capacity were evaluated at 12 weeks postprocedure as well as for complications.Results: In group A, at 12 weeks postprocedure, there was significant improvement in the mean value of HRCT volumetry and residual volume/total lung capacity (% predicted (P-value: <0.001 and 0.038, respectively. In group B, there was significant improvement in the mean value of HRCT volumetry and (residual volume/total lung capacity % predicted (P-value: 0.005 and 0.004, respectively. All patients tolerated the procedure with no mortality.Conclusion: BLVR using autologous blood and locally prepared fibrin glue is a promising method for therapy of advanced emphysema in term of efficacy, safety as well as cost effectiveness. Keywords: BLVR, bronchoscopy, COPD, interventional pulmonology

  13. Logistics Reduction and Repurposing Technology for Long Duration Space Missions

    Science.gov (United States)

    Broyan, James L.; Chu, Andrew; Ewert, Michael K.

    2014-01-01

    One of NASA's Advanced Exploration Systems (AES) projects is the Logistics Reduction and Repurposing (LRR) project, which has the goal of reducing logistics resupply items through direct and indirect means. Various technologies under development in the project will reduce the launch mass of consumables and their packaging, enable reuse and repurposing of items and make logistics tracking more efficient. Repurposing also reduces the trash burden onboard spacecraft and indirectly reduces launch mass by replacing some items on the manifest. Examples include reuse of trash as radiation shielding or propellant. This paper provides the status of the LRR technologies in their third year of development under AES. Advanced clothing systems (ACS) are being developed to enable clothing to be worn longer, directly reducing launch mass. ACS has completed a ground exercise clothing study in preparation for an International Space Station (ISS) technology demonstration in 2014. Development of launch packaging containers and other items that can be repurposed on-orbit as part of habitation outfitting has resulted in a logistics-to-living (L2L) concept. L2L has fabricated and evaluated several multi-purpose cargo transfer bags (MCTBs) for potential reuse on orbit. Autonomous logistics management (ALM) is using radio frequency identification (RFID) to track items and thus reduce crew requirements for logistics functions. An RFID dense reader prototype is under construction and plans for integrated testing are being made. Development of a heat melt compactor (HMC) second generation unit for processing trash into compact and stable tiles is nearing completion. The HMC prototype compaction chamber has been completed and system development testing is underway. Research has been conducted on the conversion of trash-to-gas (TtG) for high levels of volume reduction and for use in propulsion systems. A steam reformation system was selected for further system definition of the TtG technology

  14. Evaluation of the Advanced Subsonic Technology Program Noise Reduction Benefits

    Science.gov (United States)

    Golub, Robert A.; Rawls, John W., Jr.; Russell, James W.

    2005-01-01

    This report presents a detailed evaluation of the aircraft noise reduction technology concepts developed during the course of the NASA/FAA Advanced Subsonic Technology (AST) Noise Reduction Program. In 1992, NASA and the FAA initiated a cosponsored, multi-year program with the U.S. aircraft industry focused on achieving significant advances in aircraft noise reduction. The program achieved success through a systematic development and validation of noise reduction technology. Using the NASA Aircraft Noise Prediction Program, the noise reduction benefit of the technologies that reached a NASA technology readiness level of 5 or 6 were applied to each of four classes of aircraft which included a large four engine aircraft, a large twin engine aircraft, a small twin engine aircraft and a business jet. Total aircraft noise reductions resulting from the implementation of the appropriate technologies for each class of aircraft are presented and compared to the AST program goals.

  15. Time for the Global Rollout of Endoscopic Lung Volume Reduction.

    Science.gov (United States)

    Koegelenberg, Coenraad F N; Slebos, Dirk-Jan; Shah, Pallav L; Theron, Johan; Dheda, Keertan; Allwood, Brian W; Herth, Felix J F

    2015-01-01

    Chronic obstructive pulmonary disease remains one of the most common causes of morbidity and mortality globally. The disease is generally managed with pharmacotherapy, as well as guidance about smoking cessation and pulmonary rehabilitation. Endoscopic lung volume reduction (ELVR) has been proposed for the treatment of advanced emphysema, with the aim of obtaining the same clinical and functional advantages of surgical lung volume reduction whilst potentially reducing risks and costs. There is a growing body of evidence that certain well-defined sub-groups of patients with advanced emphysema may benefit from ELVR, provided the selection criteria are met and a systematic approach is followed. ELVR devices, particularly unidirectional valves and coils, are currently being rolled out to many countries outside of the U.S.A. and Europe, although very few centres currently have the capacity to correctly evaluate and provide ELVR to prospective candidates. The high cost of these interventions underpins the need for careful patient selection to best identify those who may or may not benefit from ELVR-related procedures. The aim of this review is to provide the practicing pulmonologist with an overview of the practical aspects and current evidence for the use of the various techniques available, and to suggest an evidence-based approach for the appropriate use of these devices, particularly in emerging markets, where there should be a drive to develop and equip key specialised ELVR units.

  16. Logistics Reduction and Repurposing Technology for Long Duration Space Missions

    Science.gov (United States)

    Broyan, James Lee, Jr.; Chu, Andrew; Ewert, Michael K.

    2014-01-01

    One of NASA's Advanced Exploration Systems (AES) projects is the Logistics Reduction and Repurposing (LRR) project, which has the goal of reducing logistics resupply items through direct and indirect means. Various technologies under development in the project will reduce the launch mass of consumables and their packaging, enable reuse and repurposing of items, and make logistics tracking more efficient. Repurposing also reduces the trash burden onboard spacecraft and indirectly reduces launch mass by one manifest item having two purposes rather than two manifest items each having only one purpose. This paper provides the status of each of the LRR technologies in their third year of development under AES. Advanced clothing systems (ACSs) are being developed to enable clothing to be worn longer, directly reducing launch mass. ACS has completed a ground exercise clothing study in preparation for an International Space Station technology demonstration in 2014. Development of launch packaging containers and other items that can be repurposed on-orbit as part of habitation outfitting has resulted in a logistics-to-living (L2L) concept. L2L has fabricated and evaluated several multi-purpose cargo transfer bags for potential reuse on-orbit. Autonomous logistics management is using radio frequency identification (RFID) to track items and thus reduce crew time for logistics functions. An RFID dense reader prototype is under construction and plans for integrated testing are being made. A heat melt compactor (HMC) second generation unit for processing trash into compact and stable tiles is nearing completion. The HMC prototype compaction chamber has been completed and system development testing is under way. Research has been conducted on the conversion of trash-to-gas (TtG) for high levels of volume reduction and for use in propulsion systems. A steam reformation system was selected for further system definition of the TtG technology.

  17. Optimal deployment of emissions reduction technologies for construction equipment.

    Science.gov (United States)

    Bari, Muhammad Ehsanul; Zietsman, Josias; Quadrifoglio, Luca; Farzaneh, Mohamadreza

    2011-06-01

    The objective of this research was to develop a multiobjective optimization model to deploy emissions reduction technologies for nonroad construction equipment to reduce emissions in a cost-effective and optimal manner. Given a fleet of construction equipment emitting different pollutants in the nonattainment (NA) and near -nonattainment (NNA) counties of a state and a set of emissions reduction technologies available for installation on equipment to control pollution/emissions, the model assists in determining the mix of technologies to be deployed so that maximum emissions reduction and fuel savings are achieved within a given budget. Three technologies considered for emissions reduction were designated as X, Y, and Z to keep the model formulation general so that it can be applied for any other set of technologies. Two alternative methods of deploying these technologies on a fleet of equipment were investigated with the methods differing in the technology deployment preference in the NA and NNA counties. The model having a weighted objective function containing emissions reduction benefits and fuel-saving benefits was programmed with C++ and ILOG-CPLEX. For demonstration purposes, the model was applied for a selected construction equipment fleet owned by the Texas Department of Transportation, located in NA and NNA counties of Texas, assuming the three emissions reduction technologies X, Y, and Z to represent, respectively, hydrogen enrichment, selective catalytic reduction, and fuel additive technologies. Model solutions were obtained for varying budget amounts to test the sensitivity of emissions reductions and fuel-savings benefits with increasing the budget. Different mixes of technologies producing maximum oxides of nitrogen (NO(x)) reductions and total combined benefits (emissions reductions plus fuel savings) were indicated at different budget ranges. The initial steep portion of the plots for NO(x) reductions and total combined benefits against budgets

  18. Lung volume reduction surgery: an overview Cirurgia redutora de volume pulmonar: uma revisão

    Directory of Open Access Journals (Sweden)

    Rodrigo Afonso da Silva Sardenberg

    2010-01-01

    Full Text Available This study intends to review the literature on the efficacy, safety and feasibility of lung volume reduction surgery (LVRS in patients with advanced emphysema. Studies on LVRS from January 1995 to December 2009 were included by using Pubmed (MEDLINE and Cochrane Library literature in English. Search words such as lung volume reduction surgery or lung reduction surgery, pneumoplasty or reduction pneumoplasty, COPD or chronic obstructive pulmonary disease and surgery, were used. We also compared medical therapy and surgical technique. Studies consisting of randomized controlled trials, controlled clinical trials (randomized and nonrandomized, reviews and case series were analyzed. Questions regarding validity of the early clinical reports, incomplete follow-up bias, selection criteria and survival, confounded the interpretation of clinical data on LVRS. Patients with upper, lower and diffuse distribution of emphysema were included; we also analyzed as key points perioperative morbidity and mortality and lung function measurement as FEV1. Bullous emphysema was excluded from this review. Surgical approach included median sternotomy, unilateral or bilateral thoracotomy, and videothoracoscopy with stapled or laser ablation. Results of prospective randomized trials between medical management and LVRS are essential before final assessment can be established.O objetivo deste estudo é revisar a literatura acerca da eficácia, segurança e viabilidade da cirurgia redutora de volume pulmonar (CRVP em pacientes com enfisema pulmonar avançado. Estudos de CRVP de janeiro de 1995 a dezembro de 2009 foram incluídos através de pesquisa na Pubmed (MEDLINE e Cochrane Library, na literatura inglesa. Palavras de busca tais como lung volume reduction surgery ou lung reduction surgery, pneumoplasty ou reduction pneumoplasty, COPD ou chronic obstructive pulmonary disease e surgery foram utilizadas. Também realizamos comparação entre terapia médica e cir

  19. Educational Media and Technology Yearbook, 1992. Volume 18.

    Science.gov (United States)

    Ely, Donald P., Ed.; Minor, Barbara B., Ed.

    The Educational Media and Technology Yearbook (EMTY) is designed to provide media and instructional technology professionals with an up-to-date, single-source overview and assessment of the field of educational technology. Each volume addresses current issues, notes trends, and provides current listings of and background information about the…

  20. Safe Reduction of Blood Volume in the Blood Gas Laboratory.

    Science.gov (United States)

    Jensen, Phillip R; Markewitz, Boaz A

    2016-11-01

    Phlebotomy is a significant cause of iatrogenic anemia in the critical care environment. It is estimated that one-third of all transfusions of packed red blood cells in intensive care units (ICU) result from phlebotomy. The aims of this study were to determine if utilizing the 1mL blood gas syringe for an adult population would impact the rate at which specimens were acceptable for testing and result reporting based on lab specimen rejection criteria; and to compare blood utilization between the 2 different syringes. This study was conducted in 1 of the adult ICUs at the University of Utah Hospital. Over a baseline period a standard adult 3 mL blood gas syringe was utilized. Subsequently the standard adult syringe was replaced by a 1 mL syringe produced by the same manufacturer with the same heparin concentration. The change to the 1 mL syringe had no effect on specimen integrity in regards to laboratory's ability to process the specimen. With use of the 1 mL syringe there was a 60% reduction in the volume of blood drawn compared with the baseline period. Standardizing the 1 mL syringe for Blood Gas Laboratory tests will reduce patient blood loss without appreciably affecting specimen rejection relative to current rates. © American Society for Clinical Pathology, 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  1. Acute volume expansion attenuates hyperthermia-induced reductions in cerebral perfusion during simulated hemorrhage

    DEFF Research Database (Denmark)

    Schlader, Zachary J; Seifert, Thomas; Wilson, Thad E

    2013-01-01

    Hyperthermia reduces the capacity to withstand a simulated hemorrhagic challenge, but volume loading preserves this capacity. This study tested the hypotheses that acute volume expansion during hyperthermia increases cerebral perfusion and attenuates reductions in cerebral perfusion during a simu...

  2. Modern firing technology with primary emission reduction

    Energy Technology Data Exchange (ETDEWEB)

    Juergen Willmann; Detlef Boese [Babcock Borsig Service GmbH (Germany)

    2004-07-01

    Cleaning of the flue gases of power station plants has increased enormously in the context of the environmental protection. Besides the cleaning of the flue gases of dust emissions by electrostatic precipitators the reduction of NOx emissions will become more and more important. The limit value of NOx emissions in Germany for boiler with a high steam capacity is 200mg/m{sup 3}n. Babcock has great experience of primary reduction of NOx emissions for different firing systems. For the choice of the firing system an exact knowledge about the coal and the ash composition is required. The significant properties of the coal are the calorific value and volatile matter content. The influence of firing systems and milling systems on combustion is discussed. 7 figs.

  3. Efficacy of bronchoscopic lung volume reduction: a meta-analysis

    Directory of Open Access Journals (Sweden)

    Iftikhar IH

    2014-05-01

    Full Text Available Imran H Iftikhar,1 Franklin R McGuire,1 Ali I Musani21Department of Medicine, Division of Pulmonary, Critical Care and Sleep Medicine, University of South Carolina, Columbia, SC, USA; 2Department of Medicine, Division of Pulmonary, Critical Care and Sleep Medicine, National Jewish Health, Denver, CO, USABackground: Over the last several years, the morbidity, mortality, and high costs associated with lung volume reduction (LVR surgery has fuelled the development of different methods for bronchoscopic LVR (BLVR in patients with emphysema. In this meta-analysis, we sought to study and compare the efficacy of most of these methods.Methods: Eligible studies were retrieved from PubMed and Embase for the following BLVR methods: one-way valves, sealants (BioLVR, LVR coils, airway bypass stents, and bronchial thermal vapor ablation. Primary study outcomes included the mean change post-intervention in the lung function tests, the 6-minute walk distance, and the St George's Respiratory Questionnaire. Secondary outcomes included treatment-related complications.Results: Except for the airway bypass stents, all other methods of BLVR showed efficacy in primary outcomes. However, in comparison, the BioLVR method showed the most significant findings and was the least associated with major treatment-related complications. For the BioLVR method, the mean change in forced expiratory volume (in first second was 0.18 L (95% confidence interval [CI]: 0.09 to 0.26; P<0.001; in 6-minute walk distance was 23.98 m (95% CI: 12.08 to 35.88; P<0.01; and in St George's Respiratory Questionnaire was −8.88 points (95% CI: −12.12 to −5.64; P<0.001.Conclusion: The preliminary findings of our meta-analysis signify the importance of most methods of BLVR. The magnitude of the effect on selected primary outcomes shows noninferiority, if not equivalence, when compared to what is known for surgical LVR.Keyword: emphysema, endobronchial valves, sealants, stents, coils

  4. Computer technology -- 1996: Applications and methodology. PVP-Volume 326

    Energy Technology Data Exchange (ETDEWEB)

    Hulbert, G.M. [ed.] [Univ. of Michigan, Ann Arbor, MI (United States); Hsu, K.H. [ed.] [Babcock and Wilcox, Barberton, OH (United States); Lee, T.W. [ed.] [FMC Corp., Santa Clara, CA (United States); Nicholas, T. [ed.] [USAF Wright Laboratory, Wright-Patterson AFB, OH (United States)

    1996-12-01

    The primary objective of the Computer Technology Committee of the ASME Pressure Vessels and Piping Division is to promote interest and technical exchange in the field of computer technology, related to the design and analysis of pressure vessels and piping. The topics included in this volume are: analysis of bolted joints; nonlinear analysis, applications and methodology; finite element analysis and applications; and behavior of materials. Separate abstracts were prepared for 23 of the papers in this volume.

  5. Technology transfer from NASA to targeted industries, volume 2

    Science.gov (United States)

    Mccain, Wayne; Schroer, Bernard J.; Souder, William E.; Spann, Mary S.; Watters, Harry; Ziemke, M. Carl

    1993-01-01

    This volume contains the following materials to support Volume 1: (1) Survey of Metal Fabrication Industry in Alabama; (2) Survey of Electronics Manufacturing/Assembly Industry in Alabama; (3) Apparel Modular Manufacturing Simulators; (4) Synopsis of a Stereolithography Project; (5) Transferring Modular Manufacturing Technology to an Apparel Firm; (6) Letters of Support; (7) Fact Sheets; (8) Publications; and (9) One Stop Access to NASA Technology Brochure.

  6. Human choice and climate change. Volume 2: Resources and technology

    Energy Technology Data Exchange (ETDEWEB)

    Raynor, S.; Malone, E. [eds.] [Pacific Northwest National Lab., Richland, WA (United States)

    1998-12-31

    This book is Volume 2 of a four-volume set which assesses social science research that is relevant to global climate change from a wide-ranging interdisciplinary perspective. Attention is focused on resources and technology as they relate to climate change. This series is indispensable reading for scientists and engineers wishing to make an effective contribution to the climate change policy debate.

  7. 75 FR 80833 - Shipboard Air Emission Reduction Technology Report

    Science.gov (United States)

    2010-12-23

    ... existing technology for reducing air emissions from cargo and passenger vessels regulated under the Clean... SECURITY Coast Guard Shipboard Air Emission Reduction Technology Report AGENCY: Coast Guard, DHS. ACTION... cargo and passenger vessels that operate in United States waters and ports. For this study, the Coast...

  8. Data base on dose reduction research projects for nuclear power plants. Volume 5

    Energy Technology Data Exchange (ETDEWEB)

    Khan, T.A.; Yu, C.K.; Roecklein, A.K. [Brookhaven National Lab., Upton, NY (United States)

    1994-05-01

    This is the fifth volume in a series of reports that provide information on dose reduction research and health physics technology or nuclear power plants. The information is taken from two of several databases maintained by Brookhaven National Laboratory`s ALARA Center for the Nuclear Regulatory Commission. The research section of the report covers dose reduction projects that are in the experimental or developmental phase. It includes topics such as steam generator degradation, decontamination, robotics, improvements in reactor materials, and inspection techniques. The section on health physics technology discusses dose reduction efforts that are in place or in the process of being implemented at nuclear power plants. A total of 105 new or updated projects are described. All project abstracts from this report are available to nuclear industry professionals with access to a fax machine through the ACEFAX system or a computer with a modem and the proper communications software through the ACE system. Detailed descriptions of how to access all the databases electronically are in the appendices of the report.

  9. Engine Validation of Noise and Emission Reduction Technology Phase I

    Science.gov (United States)

    Weir, Don (Editor)

    2008-01-01

    This final report has been prepared by Honeywell Aerospace, Phoenix, Arizona, a unit of Honeywell International, Inc., documenting work performed during the period December 2004 through August 2007 for the NASA Glenn Research Center, Cleveland, Ohio, under the Revolutionary Aero-Space Engine Research (RASER) Program, Contract No. NAS3-01136, Task Order 8, Engine Validation of Noise and Emission Reduction Technology Phase I. The NASA Task Manager was Dr. Joe Grady of the NASA Glenn Research Center. The NASA Contract Officer was Mr. Albert Spence of the NASA Glenn Research Center. This report is for a test program in which NASA funded engine validations of integrated technologies that reduce aircraft engine noise. These technologies address the reduction of engine fan and jet noise, and noise associated with propulsion/airframe integration. The results of these tests will be used by NASA to identify the engineering tradeoffs associated with the technologies that are needed to enable advanced engine systems to meet stringent goals for the reduction of noise. The objectives of this program are to (1) conduct system engineering and integration efforts to define the engine test-bed configuration; (2) develop selected noise reduction technologies to a technical maturity sufficient to enable engine testing and validation of those technologies in the FY06-07 time frame; (3) conduct engine tests designed to gain insight into the sources, mechanisms and characteristics of noise in the engines; and (4) establish baseline engine noise measurements for subsequent use in the evaluation of noise reduction.

  10. 76 FR 58543 - Draft Policy Statement on Volume Reduction and Low-Level Radioactive Waste Management

    Science.gov (United States)

    2011-09-21

    ... COMMISSION Draft Policy Statement on Volume Reduction and Low-Level Radioactive Waste Management AGENCY... Statement on Volume Reduction and Low-Level Radioactive Waste Management that updates the 1981 Policy... are also needed to safely manage Low-Level Radioactive Waste. The public comment period closed on...

  11. 77 FR 25760 - Low-Level Radioactive Waste Management and Volume Reduction

    Science.gov (United States)

    2012-05-01

    ... COMMISSION Low-Level Radioactive Waste Management and Volume Reduction AGENCY: Nuclear Regulatory Commission... Commission) is revising its 1981 Policy Statement on Low-Level Radioactive Waste (LLRW) Volume Reduction..., ``Blending of Low-Level Radioactive Waste'' (ADAMS Accession No. ML090410531), and referenced the Policy...

  12. Bronchoscopic Lung Volume Reduction Coil Treatment of Patients With Severe Heterogeneous Emphysema

    NARCIS (Netherlands)

    Slebos, Dirk-Jan; Klooster, Karin; Ernst, Armin; Herth, Felix J. F.; Kerstjens, Huib A. M.

    2012-01-01

    Background: The lung volume reduction coil (LVR-coil), a new experimental device to achieve lung volume reduction by bronchoscopy in patients with severe emphysema, works in a manner unaffected by collateral airflow. We investigated the safety and efficacy of LVR-coil treatment in patients with hete

  13. Reduction of Volume-preserving Flows on an n-dimensional Manifold

    Institute of Scientific and Technical Information of China (English)

    Yong-ai Zheng; De-bin Huang; Zeng-rong Liu

    2003-01-01

    A geometric reduction procedure for volume-preserving flows with a volume-preserving symmetry on an n-dimensional manifold is obtained. Instead of the coordinate-dependent theory and the concrete coordinate transformation, we show that a volume-preserving flow with a one-parameter volume-preserving symmetry on an n-dimensional manifold can be reduced to a volume-preserving flow on the corresponding (n - 1)-dimensional quotient space. More generally, if it admits an r-parameter volume-preserving commutable symmetry, then the reduced flow preserves the corresponding (n - r)-dimensional volume form.

  14. Computer science research and technology volume 3

    CERN Document Server

    Bauer, Janice P

    2011-01-01

    This book presents leading-edge research from across the globe in the field of computer science research, technology and applications. Each contribution has been carefully selected for inclusion based on the significance of the research to this fast-moving and diverse field. Some topics included are: network topology; agile programming; virtualization; and reconfigurable computing.

  15. Oak Ridge K-25 Site Technology Logic Diagram. Volume 2, Technology Logic Diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates envirorunental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. This volume, Volume 2, contains logic diagrams with an index. Volume 3 has been divided into two separate volumes to facilitate handling and use.

  16. Risk Reduction Technologies in General Practice and Social Work

    Directory of Open Access Journals (Sweden)

    Devin Rexvid

    2012-12-01

    Full Text Available General practitioners (GPs and social workers (SWs are professions whose professional autonomy and discretion have changed in the so-called risk and audit society. The aim of this article is to compare GPs’ and SWs’ responses to Evidence-Based and Organizational Risk Reduction Technologies (ERRT and ORRT. It is based on a content analysis of 54 peer-reviewed empirical articles. The results show that both professions held ambivalent positions towards ERRT. The response towards ORRT differed in that GPs were sceptical whilst SWs took a more pragmatic view. Furthermore the results suggest that SWs might experience professional benefits by adopting an adherent approach to the increased dissemination of risk reduction technologies (RRT. GPs, however, did not seem to experience such benefits. Keywords: Profession, risk, social worker, general practitioner, risk reduction technologies, evidence-based practice/medicine 

  17. Lung Volume Reduction After Stereotactic Ablative Radiation Therapy of Lung Tumors: Potential Application to Emphysema

    Energy Technology Data Exchange (ETDEWEB)

    Binkley, Michael S. [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, California (United States); Shrager, Joseph B. [Division of Thoracic Surgery, Department of Cardiothoracic Surgery, Stanford University School of Medicine, Stanford, California (United States); Stanford Cancer Institute, Stanford University School of Medicine, Stanford, California (United States); Leung, Ann N. [Department of Radiology, Stanford University School of Medicine, Stanford, California (United States); Popat, Rita [Department of Health Research and Policy, Stanford University School of Medicine, Stanford, California (United States); Trakul, Nicholas [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, California (United States); Department of Radiation Oncology, University of Southern California Keck School of Medicine, Los Angeles, California (United States); Atwood, Todd F.; Chaudhuri, Aadel [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, California (United States); Maxim, Peter G. [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, California (United States); Stanford Cancer Institute, Stanford University School of Medicine, Stanford, California (United States); Diehn, Maximilian, E-mail: Diehn@Stanford.edu [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, California (United States); Stanford Cancer Institute, Stanford University School of Medicine, Stanford, California (United States); Institute for Stem Cell Biology and Regenerative Medicine, Stanford University School of Medicine, Stanford, California (United States); Loo, Billy W., E-mail: BWLoo@Stanford.edu [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, California (United States); Stanford Cancer Institute, Stanford University School of Medicine, Stanford, California (United States)

    2014-09-01

    Purpose: Lung volume reduction surgery (LVRS) improves dyspnea and other outcomes in selected patients with severe emphysema, but many have excessive surgical risk for LVRS. We analyzed the dose-volume relationship for lobar volume reduction after stereotactic ablative radiation therapy (SABR) of lung tumors, hypothesizing that SABR could achieve therapeutic volume reduction if applied in emphysema. Methods and Materials: We retrospectively identified patients treated from 2007 to 2011 who had SABR for 1 lung tumor, pre-SABR pulmonary function testing, and ≥6 months computed tomographic (CT) imaging follow-up. We contoured the treated lobe and untreated adjacent lobe(s) on CT before and after SABR and calculated their volume changes relative to the contoured total (bilateral) lung volume (TLV). We correlated lobar volume reduction with the volume receiving high biologically effective doses (BED, α/β = 3). Results: 27 patients met the inclusion criteria, with a median CT follow-up time of 14 months. There was no grade ≥3 toxicity. The median volume reduction of the treated lobe was 4.4% of TLV (range, −0.4%-10.8%); the median expansion of the untreated adjacent lobe was 2.6% of TLV (range, −3.9%-11.6%). The volume reduction of the treated lobe was positively correlated with the volume receiving BED ≥60 Gy (r{sup 2}=0.45, P=.0001). This persisted in subgroups determined by high versus low pre-SABR forced expiratory volume in 1 second, treated lobe CT emphysema score, number of fractions, follow-up CT time, central versus peripheral location, and upper versus lower lobe location, with no significant differences in effect size between subgroups. Volume expansion of the untreated adjacent lobe(s) was positively correlated with volume reduction of the treated lobe (r{sup 2}=0.47, P<.0001). Conclusions: We identified a dose-volume response for treated lobe volume reduction and adjacent lobe compensatory expansion after lung tumor SABR, consistent across

  18. Waiting for Disasters: A Risk Reduction Assessment of Technological Disasters

    Science.gov (United States)

    Rovins, Jane; Winningham, Sam

    2010-05-01

    This session provides a risk reduction/mitigation assessment of natural hazards causation of technological disasters and possible solution. People use technology in an attempt to not only control their environment but nature itself in order to make them feel safe and productive. Most strategies for managing hazards followed a traditional planning model i.e. study the problem, identify and implement a solution, and move on to the next problem. This approach is often viewed as static model and risk reduction is more of an upward, positive, linear trend. However, technological disasters do not allow risk reduction action to neatly fit this upward, positive, linear trend with actual or potential threats to the environment and society. There are different types of technological disasters, including industrial accidents; pipeline ruptures; accidents at power, water and heat supply systems and other lines of communication; sudden collapse of buildings and mines; air crashes; shipwrecks; automobile and railway accidents to name a few. Natural factors can play an essential role in triggering or magnifying technological disasters. They can result from the direct destruction of given technical objects by a hazardous natural process such as the destruction of an atomic power plant or chemical plant due to an earthquake. Other examples would include the destruction of communications or infrastructure systems by heavy snowfalls, strong winds, avalanches. Events in the past ten years clearly demonstrate that natural disasters and the technological disasters that accompany them are not problems that can be solved in isolation and risk reduction can play an important part. Risk reduction was designed to head off the continuing rising financial and structural tolls from disasters. All Hazard Risk Reduction planning was supposed to include not only natural, but technological, and human-made disasters as well. The subsequent disaster risk reduction (DRR) indicators were to provide the

  19. Innovative technologies for greenhouse gas emission reduction in steel production

    Directory of Open Access Journals (Sweden)

    D. Burchart-Korol

    2016-01-01

    Full Text Available The main goal of the study was to present the most significant technological innovations aiming at reduction of greenhouse gas emission in steel production. Reduction of greenhouse gas and dust pollution is a very important aspect in the iron and steel industry. New solutions are constantly being searched for to reduce greenhouse gases (GHG. The article presents the most recent innovative technologies which may be applied in the steel industry in order to limit the emission of GHG. The significance of CCS (CO2 Capture and Storage and CCU (CO2 Capture and Utilization in the steel industry are also discussed.

  20. State of the art review of radioactive waste volume reduction techniques for commercial nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-01

    A review is made of the state of the art of volume reduction techniques for low level liquid and solid radioactive wastes produced as a result of: (1) operation of commercial nuclear power plants, (2) storage of spent fuel in away-from-reactor facilities, and (3) decontamination/decommissioning of commercial nuclear power plants. The types of wastes and their chemical, physical, and radiological characteristics are identified. Methods used by industry for processing radioactive wastes are reviewed and compared to the new techniques for processing and reducing the volume of radioactive wastes. A detailed system description and report on operating experiences follow for each of the new volume reduction techniques. In addition, descriptions of volume reduction methods presently under development are provided. The Appendix records data collected during site surveys of vendor facilities and operating power plants. A Bibliography is provided for each of the various volume reduction techniques discussed in the report.

  1. USAF Advanced Terrestrial Energy Study. Volume 2. Technology Handbook.

    Science.gov (United States)

    1983-04-01

    volume of Stirling svstems hecause the regenerator determines the dimensions of the system envelone. Table 27. STIRLING SYSTEM VOLUME (CUBIC FEET...Rankine Cycles Batteries Gas Turbines Stirling Engines Thermal Energy Storage 20. ABSTRACT (Confilime 4n roere. olde If neo**WY 41011184100140 & Wee bi A...TECHNOLOGY DESCRIPTIONS 13 Diesels, 13 Gas Turbines. 31 Stirlings , 49 Organic Rankine Cycle; 67 Fuel Cells 83 Photovoltaic Energy Conversion System, 102 Wind

  2. Technology Roadmap for Energy Reduction in Automotive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2008-09-01

    U.S. Department of Energy’s (DOE) Industrial Technologies Program (ITP), in collaboration with the United States Council for Automotive Research LLC (USCAR), hosted a technology roadmap workshop in Troy, Michigan in May 2008. The purpose of the workshop was to explore opportunities for energy reduction, discuss the challenges and barriers that might need to be overcome, and identify priorities for future R&D. The results of the workshop are presented in this report.

  3. Reduction in mean platelet volume in children with acute bronchiolitis.

    Science.gov (United States)

    Ergül, Ayşe Betül; Torun, Yasemin Altuner; Uytun, Salih; Aslaner, Hümeyra; Kısaaslan, Ayşenur Paç; Şerbetçi, Mahmut Can

    2016-03-01

    Platelets which are known to play a role in inflamation change their shapes when they are activated and this change is reflected in mean platelet volume and platelet distribution width values. Therefore, the mean platelet volume and platelet distribution width values are considered to be beneficial parameters for the diagnosis and treatment of many inflammatory diseases. The aim of the study was to evaluate platelet volume indices in children with acute bronchiolitis. A total of 514 infants who were below the age of 2 years old were evaluated in this study. Three hundred thirteen of these infants were diagnosed with acute bronchiolitis patients and 201 were healthy children. The patients were separated into four groups as mild, moderate, severe bronchiolitis and the control patient group. The groups were evaluated in terms of significant differences in the values of mean platelet volume and platelet distribution width. A p value of <0.05 was considered statistically significant for all results. The mean platelet volume was found to be 6.8±0.6 fL in the patients with mild bronchiolitis attack, 6.7±0.6 fL in the patients with moderate bronchiolitis attack, 6.5±0.5 fL in the patients with severe bronchiolitis attack and 7.3±1.1 fL in the control group. The mean platalet volume was statistically significantly lower in the mild, moderate and severe bronchiolitis attack groups compared to the control group (p=0.000). The platelet distribution width was found to be 17.2%±0.83 in the mild bronchiolitis attack group, 17.1%±0.96 in the moderate bronchiolitis attack group, 17.3%±0.87 in the severe bronchiolitis attack group and 16.9±1.6% in the control patient group. This difference was not statistically significant (p=0.159). The platelet count was statistically significantly higher in the mild, moderate and severe bronchiolitis attack groups compared to the control group (p=0.000). The mean platalet volume is decreased in patients with acute bronchiolitis. It is not

  4. Engineering Technology Reports, Volume 2: Technology Base FY00

    Energy Technology Data Exchange (ETDEWEB)

    Baron, A L; Langland, R T; Minichino, C

    2001-10-03

    In FY-2000, Engineering at Lawrence Livermore National Laboratory faced significant pressures to meet critical project milestones, and immediate demands to facilitate the reassignment of employees as the National Ignition Facility (the 600-TW laser facility being designed and built at Livermore, and one of the largest R&D construction projects in the world) was in the process of re-baselining its plan while executing full-speed its technology development efforts. This drive for change occurred as an unprecedented level of management and program changes were occurring within LLNL. I am pleased to report that we met many key milestones and achieved numerous technological breakthroughs. This report summarizes our efforts to perform feasibility and reduce-to-practice studies, demonstrations, and/or techniques--as structured through our technology centers. Whether using computational engineering to predict how giant structures like suspension bridges will respond to massive earthquakes or devising a suitcase-sized microtool to detect chemical and biological agents used by terrorists, we have made solid technical progress. Five Centers focus and guide longer-term investments within Engineering, as well as impact all of LLNL. Each Center is responsible for the vitality and growth of the core technologies it represents. My goal is that each Center will be recognized on an international scale for solving compelling national problems requiring breakthrough innovation. The Centers and their leaders are as follows: Center for Complex Distributed Systems--David B. McCallen; Center for Computational Engineering--Kyran D. Mish; Center for Microtechnology--Raymond P. Mariella, Jr.; Center for Nondestructive Characterization--Harry E. Martz, Jr.; and Center for Precision Engineering--Keith Carlisle.

  5. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  6. Physiological Modeling of Responses to Upper vs Lower Lobe Lung Volume Reduction in Homogeneous Emphysema

    Directory of Open Access Journals (Sweden)

    Arschang eValipour

    2012-10-01

    Full Text Available Rationale: In clinical trials, homogeneous emphysema patients have responded well to upper lobe volume reduction but not lower lobe volume reduction. Materials/Methods: To understand the physiological basis for this observation, a computer model was developed to simulate the effects of upper and lower lobe lung volume reduction on RV/TLC and lung recoil in homogeneous emphysema.Results: Patients with homogeneous emphysema received either upper or lower lobe volume reduction therapy based on findings of radionucleotide scintigraphy scanning. CT analysis of lobar volumes showed that patients undergoing upper (n=18; -265 mL/site and lower lobe treatment (n=11; -217 mL/site experienced similar reductions in lung volume. However, only upper lobe treatment improved FEV1 (+11.1±14.7% vs -4.4±15.8% and RV/TLC (-5.4± 8.1% vs -2.4±8.6%. Model simulations provided an unexpected explanation for this response. Increases in transpulmonary pressure subsequent to volume reduction increased RV/TLC in upper lobe alveoli, while caudal shifts in airway closure decreased RV/TLC in lower lobe alveoli. Upper lobe treatment, which eliminates apical alveoli with high RV/TLC values, lowers the average RV/TLC of the lung. Conversely, lower lobe treatment, which eliminates caudal alveoli with low RV/TLC values, has less effect. Conclusions: Lower lobe treatment in homogeneous emphysema is uniformly less effective than upper lobe treatment.

  7. Occupational dose reduction at nuclear power plants: Annotated bibliography of selected readings in radiation protection and ALARA. Volume 7

    Energy Technology Data Exchange (ETDEWEB)

    Kaurin, D.G.; Khan, T.A.; Sullivan, S.G.; Baum, J.W. [Brookhaven National Lab., Upton, NY (United States)

    1993-07-01

    The ALARA Center at Brookhaven National Laboratory publishes a series of bibliographies of selected readings in radiation protection and ALARA in the continuing effort to collect and disseminate information on radiation dose reduction at nuclear power plants. This is volume 7 of the series. The abstracts in this bibliography were selected from proceedings of technical meetings and conferences, journals, research reports, and searches of the Energy Science and Technology database of the US Department of Energy. The subject material of these abstracts relates to radiation protection and dose reduction, and ranges from use of robotics to operational health physics, to water chemistry. Material on the design, planning, and management of nuclear power stations is included, as well as information on decommissioning and safe storage efforts. Volume 7 contains 293 abstract, an author index, and a subject index. The author index is specific for this volume. The subject index is cumulative and lists all abstract numbers from volumes 1 to 7. The numbers in boldface indicate the abstracts in this volume; the numbers not in boldface represent abstracts in previous volumes.

  8. Occupational dose reduction at nuclear power plants: Annotated bibliography of selected readings in radiation protection and ALARA. Volume 8

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, S.G.; Khan, T.A.; Xie, J.W. [Brookhaven National Lab., Upton, NY (United States)

    1995-05-01

    The ALARA Center at Brookhaven National Laboratory publishes a series of bibliographies of selected readings in radiation protection and ALARA in a continuing effort to collect and disseminate information on radiation dose reduction at nuclear power plants. This volume 8 of the series. The abstracts in this bibliography were selected form proceedings of technical meetings and conference journals, research reports, and searches of the Energy Science and Technology database of the US Department of Energy. The subject material of these abstracts relates to the many aspects of radiation protection and dose reduction, and ranges form use of robotics, to operational health physics, to water chemistry. Material on the design, planning, and management of nuclear power stations is included, as well as information on decommissioning and safe storage efforts. Volume 8 contains 232 abstracts, an author index, and a subject index. The author index is specific for this volume. The subject index is cumulative and lists all abstract numbers from volumes 1 to 8. The numbers in boldface indicate the abstracts in this volume; the numbers not in boldface represent abstracts in previous volumes.

  9. Biotreatment of produced waters for volume reduction and contaminant removal

    Energy Technology Data Exchange (ETDEWEB)

    Negri, M.C.; Hinchman, R.R. [Argonne National Lab., IL (United States); Mollock, J. [Devon Energy Corp., Oklahoma City, OK (United States)

    1997-10-01

    Produced water is wastewater that is brought to the surface from natural gas wells during natural gas production. Its constituents, mostly salt, with traces of hydrocarbons and heavy metals, are a significant disposal problem. Argonne National Laboratory (ANL), in partnership with the Gas Research Institute (GRI), has developed a low-cost, low-tech method, in which green plants are used to reduce the volume of produced water. The authors have designed an engineered bioreactor system, which is modeled after natural saline wetland ecosystems. The plant bioreactor system maximizes plant evapotranspiration to reduce wastewater volume and, concurrently, may function as a biological filter to enhance contaminant degradation and immobilization in the root/rhizosphere zone. Halophyte plant species having high salt tolerance and high transpiration rates were selected after they tested them in greenhouse experiments. Models obtained by using their greenhouse findings reduced the volume of the wastewater (up to 6% salt) by 75% in about 8 days. A field demonstration of the bioreactor, designed on the basis of the results from the greenhouse study, is successfully under way at a natural gas well site in Oklahoma. The process could offer the petroleum industry a low-cost biological alternative to existing expensive options.

  10. Waste volume reduction factors for potential 242-A evaporator feed

    Energy Technology Data Exchange (ETDEWEB)

    Sederburg, J.P.

    1995-05-04

    Double-shell tank (DST) storage space requirements have been shown to be highly dependent on the end point of 242-A operations. Consequences to the DST of various waste volumes, and concentrations, are evaluated. Only waste streams that are currently planned to be stored in the DST system before the year 2004 are discussed. As of January 1, 1995, approximately 27-million L (7.2-million gal) of dilute wastes are stored in the DSTs available for evaporator processing. Waste streams planned to be transferred to the DSTs before December 31, 2004, are identified. The DST volume for storing slurry from these wastes is presented in this document. At a final slurry specific gravity of -1.35, 22.5-million L (5.93-million gal) of DST space would be needed on December 31, 2004, to store the product from evaporator processing of these feedstocks. The expected volume needed if the resultant slurry were concentrated to the traditional double-shell slurry feed (DSSF) phase boundary (a specific gravity of {approximately}1.5) would be 17.7-million L (4.67-million gal). An additional 4.8-million L (1.26-million gal) is therefore needed if these wastes are concentrated to a specific gravity of 1.35 instead of the DSSF limit.

  11. Power Tower Technology Roadmap and cost reduction plan.

    Energy Technology Data Exchange (ETDEWEB)

    Mancini, Thomas R.; Gary, Jesse A. (U.S. Department of Energy); Kolb, Gregory J.; Ho, Clifford Kuofei

    2011-04-01

    Concentrating solar power (CSP) technologies continue to mature and are being deployed worldwide. Power towers will likely play an essential role in the future development of CSP due to their potential to provide dispatchable solar electricity at a low cost. This Power Tower Technology Roadmap has been developed by the U.S. Department of Energy (DOE) to describe the current technology, the improvement opportunities that exist for the technology, and the specific activities needed to reach the DOE programmatic target of providing competitively-priced electricity in the intermediate and baseload power markets by 2020. As a first step in developing this roadmap, a Power Tower Roadmap Workshop that included the tower industry, national laboratories, and DOE was held in March 2010. A number of technology improvement opportunities (TIOs) were identified at this workshop and separated into four categories associated with power tower subsystems: solar collector field, solar receiver, thermal energy storage, and power block/balance of plant. In this roadmap, the TIOs associated with power tower technologies are identified along with their respective impacts on the cost of delivered electricity. In addition, development timelines and estimated budgets to achieve cost reduction goals are presented. The roadmap does not present a single path for achieving these goals, but rather provides a process for evaluating a set of options from which DOE and industry can select to accelerate power tower R&D, cost reductions, and commercial deployment.

  12. The lung volume reduction coil for the treatment of emphysema : a new therapy in development

    NARCIS (Netherlands)

    Klooster, Karin; ten Hacken, Nick H. T.; Slebos, Dirk-Jan

    2014-01-01

    Lung volume reduction (LVR) coil treatment is a novel therapy for patients with severe emphysema. In this bilateral bronchoscopic treatment, approximately 10 LVR coils per lobe are delivered under fluoroscopic guidance in two sequential procedures. The LVR coil reduces lung volume by compressing the

  13. Reduced astrocyte density underlying brain volume reduction in activity-based anorexia rats

    NARCIS (Netherlands)

    Frintrop, Linda; Liesbrock, Johanna; Paulukat, Lisa; Johann, Sonja; Kas, Martien J; Tolba, Rene; Heussen, Nicole; Neulen, Joseph; Konrad, Kerstin; Herpertz-Dahlmann, Beate; Beyer, Cordian; Seitz, Jochen

    2017-01-01

    OBJECTIVES: Severe grey and white matter volume reductions were found in patients with anorexia nervosa (AN) that were linked to neuropsychological deficits while their underlying pathophysiology remains unclear. For the first time, we analysed the cellular basis of brain volume changes in an animal

  14. New Approach for Error Reduction in the Volume Penalization Method

    CERN Document Server

    Iwakami-Nakano, Wakana; Hatakeyama, Nozomu; Hattori, Yuji

    2012-01-01

    The volume penalization method offers an efficient way to numerically simulate flows around complex-shaped bodies which move and/or deform in general. In this method a penalization term which has permeability eta and a mask function is added to a governing equation as a forcing term in order to impose different dynamics in solid and fluid regions. In this paper we investigate the accuracy of the volume penalization method in detail. We choose the one-dimensional Burgers' equation as a governing equation since it enables us extensive study and it has a nonlinear term similar to the Navier-Stokes equations. It is confirmed that the error which consists of the discretization/truncation error, the penalization error, the round-off error, and others has the same features as those in previous results when we use the standard definition of the mask function. As the number of grid points increases, the error converges to a non-zero constant which is equal to the penalization error. We propose a new approach for reduc...

  15. Assessment of control technology for stationary sources. Volume II: control technology data tables. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    This report, the Control Technology Data Tables, is the second volume of the three-volume final report for the contract. It presents in tabular format, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts and application status. Also included is a code list which classifies the stationary sources examined by industry, process, and emission source.

  16. Measurement of breast volume is a useful supplement to select candidates for surgical breast reduction

    DEFF Research Database (Denmark)

    Ikander, Peder; Drejøe, Jennifer Berg; Lumholt, Pavia

    2014-01-01

    -off values for breast volume were calculated based on whether or not the patients were offered reduction surgery. Most patients (93%) with a breast volume below 800 cc were not offered surgery, while most with a volume exceeding 900 cc were offered surgery (94%). In the grey zone between 800 and 900 cc...... with breast hypertrophy as a tool which facilitates their decision-making and patients' acceptance of the decisions made. FUNDING: not relevant. TRIAL REGISTRATION: not relevant....

  17. Tumor Volume Reduction Rate After Preoperative Chemoradiotherapy as a Prognostic Factor in Locally Advanced Rectal Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Yeo, Seung-Gu [Center for Colorectal Cancer, Research Institute and Hospital, National Cancer Center, Goyang (Korea, Republic of); Department of Radiation Oncology, Soonchunhyang University College of Medicine, Cheonan (Korea, Republic of); Kim, Dae Yong, E-mail: radiopiakim@hanmail.net [Center for Colorectal Cancer, Research Institute and Hospital, National Cancer Center, Goyang (Korea, Republic of); Park, Ji Won; Oh, Jae Hwan; Kim, Sun Young; Chang, Hee Jin; Kim, Tae Hyun; Kim, Byung Chang; Sohn, Dae Kyung; Kim, Min Ju [Center for Colorectal Cancer, Research Institute and Hospital, National Cancer Center, Goyang (Korea, Republic of)

    2012-02-01

    Purpose: To investigate the prognostic significance of tumor volume reduction rate (TVRR) after preoperative chemoradiotherapy (CRT) in locally advanced rectal cancer (LARC). Methods and Materials: In total, 430 primary LARC (cT3-4) patients who were treated with preoperative CRT and curative radical surgery between May 2002 and March 2008 were analyzed retrospectively. Pre- and post-CRT tumor volumes were measured using three-dimensional region-of-interest MR volumetry. Tumor volume reduction rate was determined using the equation TVRR (%) = (pre-CRT tumor volume - post-CRT tumor volume) Multiplication-Sign 100/pre-CRT tumor volume. The median follow-up period was 64 months (range, 27-99 months) for survivors. Endpoints were disease-free survival (DFS) and overall survival (OS). Results: The median TVRR was 70.2% (mean, 64.7% {+-} 22.6%; range, 0-100%). Downstaging (ypT0-2N0M0) occurred in 183 patients (42.6%). The 5-year DFS and OS rates were 77.7% and 86.3%, respectively. In the analysis that included pre-CRT and post-CRT tumor volumes and TVRR as continuous variables, only TVRR was an independent prognostic factor. Tumor volume reduction rate was categorized according to a cutoff value of 45% and included with clinicopathologic factors in the multivariate analysis; ypN status, circumferential resection margin, and TVRR were significant prognostic factors for both DFS and OS. Conclusions: Tumor volume reduction rate was a significant prognostic factor in LARC patients receiving preoperative CRT. Tumor volume reduction rate data may be useful for tailoring surgery and postoperative adjuvant therapy after preoperative CRT.

  18. Volume reductions in frontopolar and left perisylvian cortices in methamphetamine induced psychosis.

    Science.gov (United States)

    Aoki, Yuta; Orikabe, Lina; Takayanagi, Yoichiro; Yahata, Noriaki; Mozue, Yuriko; Sudo, Yasuhiko; Ishii, Tatsuji; Itokawa, Masanari; Suzuki, Michio; Kurachi, Masayoshi; Okazaki, Yuji; Kasai, Kiyoto; Yamasue, Hidenori

    2013-07-01

    Consumption of methamphetamine disturbs dopaminergic transmission and sometimes provokes schizophrenia-like-psychosis, named methamphetamine-associated psychosis (MAP). While previous studies have repeatedly reported regional volume reductions in the frontal and temporal areas as neuroanatomical substrates for psychotic symptoms, no study has examined whether such neuroanatomical substrates exist or not in patients with MAP. Magnetic resonance images obtained from twenty patients with MAP and 20 demographically-matched healthy controls (HC) were processed for voxel-based morphometry (VBM) using Diffeomorphic Anatomical Registration using Exponentiated Lie Algebra. An analysis of covariance model was adopted to identify volume differences between subjects with MAP and HC, treating intracranial volume as a confounding covariate. The VBM analyses showed significant gray matter volume reductions in the left perisylvian structures, such as the posterior inferior frontal gyrus and the anterior superior temporal gyrus, and the frontopolar cortices, including its dorsomedial, ventromedial, dorsolateral, and ventrolateral portions, and white matter volume reduction in the orbitofrontal area in the patients with MAP compared with the HC subjects. The smaller regional gray matter volume in the medial portion of the frontopolar cortex was significantly correlated with the severe positive symptoms in the individuals with MAP. The volume reductions in the left perisylvian structure suggest that patients with MAP have a similar pathophysiology to schizophrenia, whereas those in the frontopolar cortices and orbitofrontal area suggest an association with antisocial traits or vulnerability to substance dependence. Copyright © 2013 Elsevier B.V. All rights reserved.

  19. Changes in superior mesenteric artery Doppler waveform during reduction of cardiac stroke volume and hypotension

    DEFF Research Database (Denmark)

    Perko, M J; Perko, Grazyna; Just, S

    1996-01-01

    Influence of stroke volume reduction and hypotension on the superior mesenteric artery (SMA) Doppler waveform was evaluated during head-up tilt-induced central hypovolemia in 11 healthy volunteers. During normotensive reduction in stroke volume, peak systolic velocity (pV), mean velocity, pulsati......Influence of stroke volume reduction and hypotension on the superior mesenteric artery (SMA) Doppler waveform was evaluated during head-up tilt-induced central hypovolemia in 11 healthy volunteers. During normotensive reduction in stroke volume, peak systolic velocity (pV), mean velocity...... of the study indicate that alterations in stroke volume induce consequential changes in the SMA Doppler waveform. These changes originate from both direct influence of stroke volume and/or pressure on blood flow velocity, and alterations in SMA peripheral resistance that follow variations in stroke volume....... Presented interdependencies should be taken into consideration while studying mesenteric physiology with the use of Doppler technique and while interpreting the duplex results in patients suffering from diseases that may influence flow velocity and mimic or obscure Doppler effects of the SMA stenosis....

  20. Risk reduction technologies in general practice and social work

    OpenAIRE

    Rexvid, Devin; Blom, Björn; Evertsson, Lars; Forssén, Annika

    2012-01-01

    General practitioners (GPs) and social workers (SWs) are professions whose professional autonomy and discretion have changed in the so-called risk and audit society. The aim of this article is to compare GPs’ and SWs’ responses to Evidence-Based and Organizational Risk Reduction Technologies (ERRT and ORRT). It is based on a content analysis of 54 peer-reviewed empirical articles. The results show that both professions held ambivalent positions towards ERRT. The response towards ORRT differed...

  1. Risk Reduction Technologies in General Practice and Social Work

    OpenAIRE

    Devin Rexvid; Björn Blom; Lars Evertsson; Annika Forssén

    2012-01-01

    General practitioners (GPs) and social workers (SWs) are professions whose professional autonomy and discretion have changed in the so-called risk and audit society. The aim of this article is to compare GPs’ and SWs’ responses to Evidence-Based and Organizational Risk Reduction Technologies (ERRT and ORRT). It is based on a content analysis of 54 peer-reviewed empirical articles. The results show that both professions held ambivalent positions towards ERRT. The response towards ORRT differed...

  2. Oak Ridge K-25 Site Technology Logic Diagram. Volume 1, Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. This Volume, Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume is divided into ten chapters. The first chapter is a brief introduction, and the second chapter details the technical approach of the TLD. These categories are the work activities necessary for successful decontamination and decommissioning, waste management, and remedial action of the K-25 Site. The categories are characterization, decontamination, dismantlement, robotics and automation, remedial action, and waste management. Materials disposition is addressed in Chap. 9. The final chapter contains regulatory compliance information concerning waste management, remedial action, and decontamination and decommissioning.

  3. Center for BioBased Binders and Pollution Reduction Technology

    Energy Technology Data Exchange (ETDEWEB)

    Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

    2013-07-01

    Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

  4. Cortical grey matter volume reduction in people with schizophrenia is associated with neuro-inflammation.

    Science.gov (United States)

    Zhang, Y; Catts, V S; Sheedy, D; McCrossin, T; Kril, J J; Shannon Weickert, C

    2016-12-13

    Cortical grey matter volume deficits and neuro-inflammation exist in patients with schizophrenia, although it is not clear whether elevated cytokines contribute to the cortical volume reduction. We quantified cortical and regional brain volumes in fixed postmortem brains from people with schizophrenia and matched controls using stereology. Interleukin (IL)-6, IL-1β, IL-8 and SERPINA3 messenger RNAs (mRNAs) were quantified in the contralateral fresh frozen orbitofrontal cortex. We found a small, but significant reduction in cortical grey matter (1.3%; F(1,85)=4.478, P=0.037) and superior frontal gyrus (6.5%; F(1,80)=5.700, P=0.019) volumes in individuals with schizophrenia compared with controls. Significantly reduced cortical grey matter (9.2%; F(1,24)=8.272, P=0.008) and superior frontal gyrus (13.9%; F(1,20)=5.374, P=0.031) volumes were found in cases with schizophrenia and 'high inflammation' status relative to schizophrenia cases with 'low inflammation' status in the prefrontal cortex. The expression of inflammatory mRNAs in the orbitofrontal cortex was significantly correlated with those in dorsolateral prefrontal cortex (all r>0.417, all Pgrey matter and superior frontal gyrus volumes (all rgrey matter volume in people with schizophrenia is exaggerated in those who have high expression of inflammatory cytokines. Further, antipsychotic medication intake does not appear to ameliorate the reduction in brain volume.

  5. Transuranic (Tru) waste volume reduction operations at a plutonium facility

    Energy Technology Data Exchange (ETDEWEB)

    Cournoyer, Michael E [Los Alamos National Laboratory; Nixon, Archie E [Los Alamos National Laboratory; Dodge, Robert L [Los Alamos National Laboratory; Fife, Keith W [Los Alamos National Laboratory; Sandoval, Arnold M [Los Alamos National Laboratory; Garcia, Vincent E [Los Alamos National Laboratory

    2010-01-01

    Programmatic operations at the Los Alamos National Laboratory Plutonium Facility (TA 55) involve working with various amounts of plutonium and other highly toxic, alpha-emitting materials. The spread of radiological contamination on surfaces, airborne contamination, and excursions of contaminants into the operator's breathing zone are prevented through use of a variety of gloveboxes (the glovebox, coupled with an adequate negative pressure gradient, provides primary confinement). Size-reduction operations on glovebox equipment are a common activity when a process has been discontinued and the room is being modified to support a new customer. The Actin ide Processing Group at TA-55 uses one-meter-long glass columns to process plutonium. Disposal of used columns is a challenge, since they must be size-reduced to get them out of the glovebox. The task is a high-risk operation because the glass shards that are generated can puncture the bag-out bags, leather protectors, glovebox gloves, and the worker's skin when completing the task. One of the Lessons Learned from these operations is that Laboratory management should critically evaluate each hazard and provide more effective measures to prevent personnel injury. A bag made of puncture-resistant material was one of these enhanced controls. We have investigated the effectiveness of these bags and have found that they safely and effectively permit glass objects to be reduced to small pieces with a plastic or rubber mallet; the waste can then be easily poured into a container for removal from the glove box as non-compactable transuranic (TRU) waste. This size-reduction operation reduces solid TRU waste generation by almost 2% times. Replacing one-time-use bag-out bags with multiple-use glass crushing bags also contributes to reducing generated waste. In addition, significant costs from contamination, cleanup, and preparation of incident documentation are avoided. This effort contributes to the Los Alamos

  6. Pipeline cost reduction through effective project management and applied technology

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, A. [TransCanada Pipeline Ltd., Alberta (Canada); Babuk, T. [Empress International Inc., Westwood, NJ (United States); Mohitpour, M. [Tempsys Pipeline Solutions Inc., Vancouver, BC (Canada); Murray, M.A. [National Energy Board of Canada (Canada)

    2005-07-01

    Pipelines are regarded by many as passive structures with the technology involved in their construction and operation being viewed as relatively simple and stable. If such is the case how can there be much room for cost improvement? In reality, there have been many technological and regulatory innovations required within the pipeline industry to meet the challenges posed by ever increasing consumer demand for hydrocarbons, the effects of aging infrastructure and a need to control operating and maintenance expenditures. The importance of technology management, as a subset of overall project management, is a key element of life cycle cost control. Assurance of public safety and the integrity of the system are other key elements in ensuring a successful pipeline project. The essentials of best practise project management from an owner/ operator's perspective are set out in the paper. Particular attention is paid to the appropriate introduction of new technology, strategic procurement practice and material selection, indicating that capital cost savings of up to 15% are achievable without harming life cycle cost. The value of partnering leading to technical innovation, cost savings and improved profitability for all the participants is described. Partnering also helps avoid duplicated effort through the use of common tools for design, planning schedule tracking and reporting. Investing in appropriate technology development has been a major source of cost reduction in recent years and the impact of a number of these recently introduced technologies in the areas of materials, construction processes and operation and maintenance are discussed in the paper. (author)

  7. Oak Ridge National Laboratory Technology Logic Diagram. Volume 2, Technology Logic Diagram: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1. and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on the RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. Remedial action is the focus of Vol. 2, Pt. B, which has been divided into the three necessary subelements of the RA: characterization, RA, and robotics and automation. Each of these sections address general ORNL problems, which are then broken down by problem area/constituents and linked to potential remedial technologies. The diagrams also contain summary information about a technology`s status, its science and technology needs, and its implementation needs.

  8. Fluorescence enhancement and focal volume reduction observed in c-shaped nano-apertures

    Science.gov (United States)

    Yuen, Yin; Fore, Samantha; Huser, Thomas; Hesselink, Lambertus

    2008-02-01

    We evaluate the potential ability of c-shaped apertures milled in aluminum thin films to reduce the effective measurement volume and to enhance the fluorescence signal for fluorescence correlation spectroscopy of ATTO655 dye dissolved in a HEPES buffer solution. Previous studies have shown that by morphing a square aperture into a rectangular aperture while holding the cross-sectional area constant will yield strong polarization dependence in the reduction of the effective volume and about a factor of 2-3 enhancement in the fluorescence count rate per molecule. By morphing the rectangular aperture into a c-shaped aperture we gain further reduction in focal volume while maintaining the count rate enhancements. In particular, we compare c-shaped apertures to squares with the same cross-sectional area and show that one can achieve one molecule per focal volume at ~3µM (about a 1000 times reduction in effective volume compared to confocal FCS) while maintaining a fluorescence count rate per molecule of about an order of magnitude higher than for bulk diffusing dyes. Two orthogonal polarizations for the incident field have been studied to explore the effects on the focal volume reduction and fluorescence count rate enhancements.

  9. Cycle update : advanced fuels and technologies for emissions reduction

    Energy Technology Data Exchange (ETDEWEB)

    Smallwood, G. [National Research Council of Canada, Ottawa, ON (Canada)

    2009-07-01

    This paper provided a summary of key achievements of the Program of Energy Research and Development advanced fuels and technologies for emissions reduction (AFTER) program over the funding cycle from fiscal year 2005/2006 to 2008/2009. The purpose of the paper was to inform interested parties of recent advances in knowledge and in science and technology capacities in a concise manner. The paper discussed the high level research and development themes of the AFTER program through the following 4 overarching questions: how could advanced fuels and internal combustion engine designs influence emissions; how could emissions be reduced through the use of engine hardware including aftertreatment devices; how do real-world duty cycles and advanced technology vehicles operating on Canadian fuels compare with existing technologies, models and estimates; and what are the health risks associated with transportation-related emissions. It was concluded that the main issues regarding the use of biodiesel blends in current technology diesel engines are the lack of consistency in product quality; shorter shelf life of biodiesel due to poorer oxidative stability; and a need to develop characterization methods for the final oxygenated product because most standard methods are developed for hydrocarbons and are therefore inadequate. 2 tabs., 13 figs.

  10. Measurement of breast volume is a useful supplement to select candidates for surgical breast reduction

    DEFF Research Database (Denmark)

    Ikander, Peder; Drejøe, Jennifer Berg; Lumholt, Pavia

    2014-01-01

    for breast reduction surgery, thus establishing a standard decision basis that can be shared by surgeons and departments to secure patients fair and equal treatment opportunities. MATERIAL AND METHODS: A total of 427 patients who were referred to three Danish public hospitals with breast hypertrophy...... in the period from January 2007 to March 2011 were included prospectively in the study. The patients' subjective complaints, height, weight and standard breast measurements were registered as well as the decision for or against surgery. Breast volume was measured using transparent plastic cups. RESULTS: Cut......-off values for breast volume were calculated based on whether or not the patients were offered reduction surgery. Most patients (93%) with a breast volume below 800 cc were not offered surgery, while most with a volume exceeding 900 cc were offered surgery (94%). In the grey zone between 800 and 900 cc...

  11. Quantitative analysis of plasma proteins in whole blood-derived fresh frozen plasma prepared with three pathogen reduction technologies.

    Science.gov (United States)

    Larrea, Luis; Ortiz-de-Salazar, María-Isabel; Martínez, Patricia; Roig, Roberto

    2015-06-01

    Several plasma pathogen reduction technologies (PRT) are currently available. We evaluated three plasma PRT processes: Cerus Amotosalen (AM), Terumo BCT riboflavin (RB) and Macopharma methylene blue (MB). RB treatment resulted in the shortest overall processing time and in the smallest volume loss (1%) and MB treatment in the largest volume loss (8%). MB treatment retained the highest concentrations of factors II, VII, X, IX, Protein C, and Antithrombin and the AM products of factor V and XI. Each PRT process evaluated offered distinct advantages such as procedural simplicity and volume retention (RB) and overall plasma protein retention (MB).

  12. Relation between trunk fat volume and reduction of total lung capacity in obese men.

    Science.gov (United States)

    Watson, R A; Pride, N B; Thomas, E Louise; Ind, P W; Bell, J D

    2012-01-01

    Reduction in total lung capacity (TLC) in obese men is associated with restricted expansion of the thoracic cavity at full inflation. We hypothesized that thoracic expansion was reduced by the load imposed by increased total trunk fat volume or its distribution. Using MRI, we measured internal and subcutaneous trunk fat and total abdominal and thoracic volumes at full inflation in 14 obese men [mean age: 52.4 yr, body mass index (BMI): 38.8 (range: 36-44) kg/m(2)] and 7 control men [mean age: 50.1 yr, BMI: 25.0 (range: 22-27.5) kg/m(2)]. TLC was measured by multibreath helium dilution and was restricted (fat volume was 16.65 (range: 12.6-21.8) liters in obese men and 6.98 (range: 3.0-10.8) liters in control men. Anthropometry and mean total trunk fat volumes were similar in OR men and obese men without restriction (the ON subgroup). Mean total intraabdominal volume was 9.41 liters in OR men and 11.15 liters in ON men. In obese men, reduced thoracic expansion at full inflation and restriction of TLC were not inversely related to a large volume of 1) intra-abdominal or total abdominal fat, 2) subcutaneous fat volume around the thorax, or 3) total trunk fat volume. In addition, trunk fat volumes in obese men were not inversely related to gas volume or estimated intrathoracic volume at supine functional residual capacity. In conclusion, this study failed to support the hypotheses that restriction of TLC or impaired expansion of the thorax at full inflation in middle-aged obese men was simply a consequence of a large abdominal volume or total trunk fat volume or its distribution.

  13. Technology Directions for the 21st Century, volume 1

    Science.gov (United States)

    Crimi, Giles F.; Verheggen, Henry; McIntosh, William; Botta, Robert

    1996-01-01

    For several decades, semiconductor device density and performance have been doubling about every 18 months (Moore's Law). With present photolithography techniques, this rate can continue for only about another 10 years. Continued improvement will need to rely on newer technologies. Transition from the current micron range for transistor size to the nanometer range will permit Moore's Law to operate well beyond 10 years. The technologies that will enable this extension include: single-electron transistors; quantum well devices; spin transistors; and nanotechnology and molecular engineering. Continuation of Moore's Law will rely on huge capital investments for manufacture as well as on new technologies. Much will depend on the fortunes of Intel, the premier chip manufacturer, which, in turn, depend on the development of mass-market applications and volume sales for chips of higher and higher density. The technology drivers are seen by different forecasters to include video/multimedia applications, digital signal processing, and business automation. Moore's Law will affect NASA in the areas of communications and space technology by reducing size and power requirements for data processing and data fusion functions to be performed onboard spacecraft. In addition, NASA will have the opportunity to be a pioneering contributor to nanotechnology research without incurring huge expenses.

  14. A framework for evaluation of technology transfer programs. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    The objective of this volume is to describe a framework with which DOE can develop a program specific methodology to evaluate it`s technology transfer efforts. This approach could also be applied to an integrated private sector technology transfer organization. Several benefits will be realized from the application of this work. While the immediate effect will be to assist program managers in evaluating and improving program performance, the ultimate benefits will accrue to the producing industry, the states, and the nation in the form of sustained or increased domestic oil production. This benefit depends also, of course, on the effectiveness of the technology being transferred. The managers of the Technology Transfer program, and the larger federal oil and gas R&D programs, will be provided with a means to design and assess the effectiveness of program efforts as they are developed, tested and performed. The framework allows deficiencies in critical aspects of the program to be quickly identified, allowing for timely corrections and improvements. The actual process of developing the evaluation also gives the staff of the Oil R&D Program or Technology Transfer subprogram the opportunity to become oriented to the overall program goals. The structure and focus imposed by the evaluation paradigm will guide program staff in selecting activities which are consistent with achieving the goals of the overall R&D program.

  15. Feasibility of contrast material volume reduction in coronary artery imaging using 320-slice volume CT

    Energy Technology Data Exchange (ETDEWEB)

    Hein, Patrick A.; May, Juliane; Rogalla, Patrik; Hamm, Bernd; Lembcke, Alexander [Charite-University Hospital, Department of Radiology, Berlin (Germany); Butler, Craig [Charite-University Hospital, Department of Radiology, Berlin (Germany); University of Alberta, Department of Cardiology, Edmonton, Alberta (Canada)

    2010-06-15

    To assess reduced volumes of contrast agent on image quality for coronary computed tomography angiography (CCTA) by using single-beat cardiac imaging with 320-slice CT. Forty consecutive male patients (mean age: 55.8 years) undergoing CCTA with body weight {<=}85 kg, heart rate {<=}65 bpm, and ejection fraction {>=}55% were included. Image acquisition protocol was standardized (120 kV, 400 mA, and prospective ECG-triggered single-beat nonspiral CCTA). Patients were randomly assigned to one of four groups (G1: received 40 ml, G2: 50 ml, G3: 60 ml, G4: 70 ml). Groups were compared with respect to aortic attenuation, image noise, and image quality. CT values (mean {+-} standard deviation) in the aortic root were measured as 423 {+-} 38 HU in G1, and 471 {+-} 68, 463 {+-} 60, and 476 {+-} 78 HU in G2-4, respectively. There were no statistically significant differences in attenuation among the groups (P > 0.068). All 40 CT datasets were rated diagnostic, and image noise and image quality were not statistically different among groups. Using 320-slice volume CT, diagnostic image quality can be achieved with 40 ml of contrast material in CCTA in patients with normal body weight, cardiac function, and low heart rate. (orig.)

  16. Advanced Thermionic Technology Program: summary report. Volume 4. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    This report summarizes the progress made by the Advanced Thermionic Technology Program during the past several years. This Program, sponsored by the US Department of Energy, has had as its goal adapting thermionic devices to generate electricity in a terrestrial (i.e., combustion) environment. Volume 4 (Part E) is a highly technical discussion of the attempts made by the Program to push the state-of-the-art beyond the current generation of converters and is directed toward potential researchers engaged in this same task. These technical discussions are complemented with Appendices where appropriate.

  17. Emerging Communication Technologies (ECT) Phase 2 Report. Volume 3; Ultra Wideband (UWB) Technology

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Chiodini, Robert; Nelson, Richard A.; Huang, PoTien; Kruhm, David A.

    2003-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Second Generation Reusable Launch Vehicle (2nd Gen RLV), Orbital Space Plane, Advanced Range Technology Working Group (ARTWG) and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures. ECT was a continuation of the Range Information System Management (RISM) task started in 2002. RISM identified the three advance communication technologies investigated under ECT. These were Wireless Ethernet (Wi-Fi), Free Space Optics (FSO), and Ultra Wideband (UWB). Due to the report s size, it has been broken into three volumes: 1) Main Report 2) Appendices 3) UWB

  18. DEFTEST. Defence Technological and Scientific Thesaurus. Volume 2. M - Z

    Science.gov (United States)

    1988-05-01

    aoo soNO II DRS - SP- 1 (VOL 2) AR- 005 -466 DEFTEST DEFENCE TECHNOLOGICAL AND SCIENTIFIC THESAURUS Volume 2 M-Z 1988 Edition Defence Reports...dim =1.Waf ON Sealoves Offi anwONid mu. Cho ONSMWO Pliqdu INUMMONma~ei ON-lf NT. A" am .NKS emb Co di wf Jet ofl bUSSI nm md Oi e Midib mdi Fade...fa ii IFT N~m adds Pawnrum OtaMl orgaic add CrOMI adds uorm TaY1ears"ls "Takd ugin Serb Tod ca i iPolBaine o lchmif NT n I -~ Sdenm and Technolog Oro

  19. Ossified materialism: introduction to the special volume on absolute reductions in materials throughput and emissions

    NARCIS (Netherlands)

    Akenji, L.; Bengtsson, M.; Bleiswitaz, R.; Tukker, A.

    2016-01-01

    Drawing from papers in this special volume (SV), this introductory paper on absolute reductions argues that the magnitude, scope and urgency of the sustainability challenge require a drastic change in global civilisation, including a radical transformation of the institutional arrangements and socio

  20. Lung volume reduction coil treatment for patients with severe emphysema : a European multicentre trial

    NARCIS (Netherlands)

    Deslee, Gaetan; Klooster, Karin; Hetzel, Martin; Stanzel, Franz; Kessler, Romain; Marquette, Charles-Hugo; Witt, Christian; Blaas, Stefan; Gesierich, Wolfgang; Herth, Felix J. F.; Hetzel, Juergen; van Rikxoort, Eva M.; Slebos, Dirk-Jan

    2014-01-01

    Background The lung volume reduction (LVR) coil is a minimally invasive bronchoscopic nitinol device designed to reduce hyperinflation and improve elastic recoil in severe emphysema. We investigated the feasibility, safety and efficacy of LVR coil treatment in a prospective multicentre cohort trial

  1. Lung volume reduction for severe emphysema: do we need a scalpel or a scope?

    Directory of Open Access Journals (Sweden)

    D. Van Raemdonck

    2010-09-01

    Full Text Available Resectional lung volume reduction has proven to be superior to medical treatment in reducing dyspnoea and in increasing lung function, survival and quality of life in a very well selected, low risk group of hyperinflated patients with heterogeneous emphysema predominantly in the upper lobe. Nevertheless, this intervention is hampered by an important pulmonary (30% and cardiovascular (20% morbidity, mainly as a result of prolonged (>7 days air leak, and a 5% risk of death as a result of the surgical intervention. Results from ongoing randomised trials are awaited in order to determine whether less invasive, non-resectional lung volume treatment of emphysema via the bronchoscope using endobronchial valves, airway bypass stents or biological adhesives/heated water vapour will yield similar improvement with less morbidity and reduced mortality, compared with surgical resection. Furthermore, it is hoped that endoscopic lung volume reduction techniques may help patients with homogeneous emphysema currently excluded by most teams for the resectional procedure.

  2. Effect of volume loading on the Frank-Starling relation during reductions in central blood volume in heat-stressed humans

    DEFF Research Database (Denmark)

    Bundgaard-Nielsen, Morten; Wilson, T E; Seifert, Thomas

    2010-01-01

    During reductions in central blood volume while heat stressed, a greater decrease in stroke volume (SV) for a similar decrease in ventricular filling pressure, compared to normothermia, suggests that the heart is operating on a steeper portion of a Frank-Starling curve. If so, volume loading of h...

  3. Development of volume reduction method of cesium contaminated soil with magnetic separation

    Energy Technology Data Exchange (ETDEWEB)

    Yukumatsu, Kazuki; Nomura, Naoki; Mishima, Fumihito; Akiyama, Yoko; Nishijima, Shigehiro [Osaka University, Osaka (Japan)

    2016-03-15

    In this study, we developed a new volume reduction technique for cesium contaminated soil by magnetic separation. Cs in soil is mainly adsorbed on clay which is the smallest particle constituent in the soil, especially on paramagnetic 2:1 type clay minerals which strongly adsorb and fix Cs. Thus selective separation of 2:1 type clay with a superconducting magnet could enable to reduce the volume of Cs contaminated soil. The 2:1 type clay particles exist in various particle sizes in the soil, which leads that magnetic force and Cs adsorption quantity depend on their particle size. Accordingly, we examined magnetic separation conditions for efficient separation of 2:1 type clay considering their particle size distribution. First, the separation rate of 2:1 type clay for each particle size was calculated by particle trajectory simulation, because magnetic separation rate largely depends on the objective size. According to the calculation, 73 and 89 % of 2:1 type clay could be separated at 2 and 7 T, respectively. Moreover we calculated dose reduction rate on the basis of the result of particle trajectory simulation. It was indicated that 17 and 51 % of dose reduction would be possible at 2 and 7 T, respectively. The difference of dose reduction rate at 2 T and 7 T was found to be separated a fine particle. It was shown that magnetic separation considering particle size distribution would contribute to the volume reduction of contaminated soil.

  4. Occupational dose reduction at Department of Energy contractor facilities: Bibliography of selected readings in radiation protection and ALARA; Volume 5

    Energy Technology Data Exchange (ETDEWEB)

    Dionne, B.J.; Sullivan, S.G.; Baum, J.W. [Brookhaven National Lab., Upton, NY (United States)

    1994-01-01

    Promoting the exchange of information related to implementation of the As Low as Reasonably Achievable (ALARA) philosophy is a continuing objective for the Department of Energy (DOE). This report was prepared by the Brookhaven National Laboratory (BNL) ALARA Center for the DOE Office of Health. It contains the fifth in a series of bibliographies on dose reduction at DOE facilities. The BNL ALARA Center was originally established in 1983 under the sponsorship of the Nuclear Regulatory Commission to monitor dose-reduction research and ALARA activities at nuclear power plants. This effort was expanded in 1988 by the DOE`s Office of Environment, Safety and Health, to include DOE nuclear facilities. This bibliography contains abstracts relating to various aspects of ALARA program implementation and dose-reduction activities, with a specific focus on DOE facilities. Abstracts included in this bibliography were selected from proceedings of technical meetings, journals, research reports, searches of the DOE Energy, Science and Technology Database (in general, the citation and abstract information is presented as obtained from this database), and reprints of published articles provided by the authors. Facility types and activities covered in the scope of this report include: radioactive waste, uranium enrichment, fuel fabrication, spent fuel storage and reprocessing, facility decommissioning, hot laboratories, tritium production, research, test and production reactors, weapons fabrication and testing, fusion, uranium and plutonium processing, radiography, and accelerators. Information on improved shielding design, decontamination, containments, robotics, source prevention and control, job planning, improved operational and design techniques, as well as on other topics, has been included. In addition, DOE/EH reports not included in previous volumes of the bibliography are in this volume (abstracts 611 to 684). This volume (Volume 5 of the series) contains 217 abstracts.

  5. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 4

    Science.gov (United States)

    Lewis, Pattie L.

    2009-01-01

    In 2004, in one of their first collaborative efforts, Centro Para Prevencao da Poluicao (Portuguese Center for Pollution Prevention or C3P). teamed with Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) and two Portuguese entities, TAP Portugal (Portuguese National Airline) and OGMA Indtistria Aeron utica de Portugal (Portuguese Aeronautics Industry), to target the reduction of hexavalent chromium, cadmium, and volatile organic compounds (VOCs) in aircraft maintenance operations. This project focused on two coating systems that utilize non-chrome pretreatments and low-VOC primers and topcoats.

  6. Technologies for the Reduction of Nitrogen Oxides Emissions

    Directory of Open Access Journals (Sweden)

    Paulica Arsenie

    2015-06-01

    Full Text Available When it comes to gas turbines, their main problem concerning pollutant emissions is represented by nitric oxides. Among other emissions, sulphur oxides being much reduced due to the use of liquid distilled and gas fuels with a low content of sulphur. Using water or steam injection became the favourite method during the '80s and especially the '90s since "dry" methods and catalytic reduction were both at the beginning of the development phase. Catalytic convertors have been used since the '80s and they are still used although the costs of renewing the catalyst are very high. In the last twenty years a gradual decrease has been registered on the limits of nitric oxides from 75 ppm to 25 ppm, and now the target is oriented towards the 9 ppm level. The evolution of burning technologies of combustion makes it possible to control the level of production of nitric oxides even from the source without being necessary to use "humid" methods. This, of course, opened the market for gas turbines because they can function even in areas with limited quality water reserves, such as maritime platforms and in the desert. In this paper, we are going to show that, although water injection is still used, "dry" control technologies of burning became favourite methods for the majority of users on the industrial power generators market. The great dependency between the creation of nitric oxides and the temperature reveals the effect of direct water or steam injection on reducing nitric oxides. Recent research showed that a reduction up to 85% of nitric oxides may be obtained by using the water or steam injection all together with the improvement of aerodynamic character of the burning room.

  7. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section.

  8. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections.

  9. Enhancing economic competiveness of dish Stirling technology through production volume and localization: Case study for Morocco

    Science.gov (United States)

    Larchet, Kevin; Guédez, Rafael; Topel, Monika; Gustavsson, Lars; Machirant, Andrew; Hedlund, Maria-Lina; Laumert, Björn

    2017-06-01

    The present study quantifies the reduction in the levelized cost of electricity (LCoE) and capital expenditure (CAPEX) of a dish Stirling power plant (DSPP) through an increase in localization and unit production volume. Furthermore, the localization value of the plant is examined to determine how much investment is brought into the local economy. Ouarzazate, Morocco, was chosen as the location of the study due to the country's favorable regulatory framework with regards to solar power technologies and its established industry in the concentrating solar power (CSP) field. A detailed techno-economic model of a DSPP was developed using KTH's in-house modelling tool DYESOPT, which allows power plant evaluation by means of technical and economic performance indicators. Results on the basis of LCoE and CAPEX were compared between two different cases of production volume, examining both a minimum and maximum level of localization. Thereafter, the DSPP LCoE and localization value were compared against competing solar technologies to evaluate its competitiveness. In addition, a sensitivity analysis was conducted around key design parameters. The study confirms that the LCoE of a DSPP can be reduced to values similar to solar photovoltaic (PV) and lower than other CSP technologies. Furthermore, the investment in the local economy is far greater when compared to PV and of the same magnitude to other CSP technologies. The competiveness of a DSPP has the potential to increase further when coupled with thermal energy storage (TES), which is currently under development.

  10. Adjuvant radiotherapy in stage I seminoma: Is there a role for further reduction of treatment volume?

    Energy Technology Data Exchange (ETDEWEB)

    Bruns, Frank; Bremer, Michael; Meyer, Andreas; Karstens, Johann H. [Hannover Medical School (Germany). Dept. of Radiation Oncology

    2005-03-01

    An analysis was performed to determine whether a cranial reduction of the portals to the T11/T12 junction instead of the common T10/T11 junction would alter the outcome of patients with stage I seminoma. Of 163 consecutive patients with newly diagnosed testicular seminoma referred to the authors' institution between April 1992 and April 1999, 80 patients with stage I seminoma were treated with cranially reduced para-aortic treatment fields reaching from the top of T12 to the bottom of L4. Median total dose was 20.0 Gy (range, 19.8-27.2 Gy). Patients were followed-up by the use of CT in regular intervals. After a median follow-up of 7.1 years (range, 4.1-11.1 years), four patients (5%) had relapsed resulting in an actuarial 5-year relapse-free survival of 95%. No patients relapsed within the cranially reduced treatment volume above the top of T12. The cranial reduction of the para-aortic treatment fields resulted in a median reduction of treatment volume of 16% (range, 13-21%). The achieved median reduction in treatment volume of 16% appears to be relevant and is not associated with an increased relapse rate. This approach is recommended in analogy to the surgical approach in NSGCT to further minimize the risk of radiation-related late effects.

  11. Long-term occupational stress is associated with regional reductions in brain tissue volumes.

    Directory of Open Access Journals (Sweden)

    Eva Blix

    Full Text Available There are increasing reports of cognitive and psychological declines related to occupational stress in subjects without psychiatric premorbidity or major life trauma. The underlying neurobiology is unknown, and many question the notion that the described disabilities represent a medical condition. Using PET we recently found that persons suffering from chronic occupational stress had limbic reductions in the 5-HT1A receptor binding potential. Here we examine whether chronic work-related stress is also associated with changes in brain structure. We performed MRI-based voxel-based morphometry and structural volumetry in stressed subjects and unstressed controls focusing on gray (GM and white matter (WM volumes, and the volumes of hippocampus, caudate, and putamen - structures known to be susceptible to neurotoxic changes. Stressed subjects exhibited significant reductions in the GM volumes of the anterior cingulate cortex and the dorsolateral prefrontal cortex. Furthermore, their caudate and putamen volumes were reduced, and the volumes correlated inversely to the degree of perceived stress. Our results add to previous data on chronic psychosocial stress, and indicate a morphological involvement of the frontostriatal circuits. The present findings of morphological changes in these regions confirm our previous conclusion that symptoms from occupational stress merit careful investigations and targeted treatment.

  12. Research on the application in disaster reduction for using cloud computing technology

    Science.gov (United States)

    Tao, Liang; Fan, Yida; Wang, Xingling

    Cloud Computing technology has been rapidly applied in different domains recently, promotes the progress of the domain's informatization. Based on the analysis of the state of application requirement in disaster reduction and combining the characteristics of Cloud Computing technology, we present the research on the application of Cloud Computing technology in disaster reduction. First of all, we give the architecture of disaster reduction cloud, which consists of disaster reduction infrastructure as a service (IAAS), disaster reduction cloud application platform as a service (PAAS) and disaster reduction software as a service (SAAS). Secondly, we talk about the standard system of disaster reduction in five aspects. Thirdly, we indicate the security system of disaster reduction cloud. Finally, we draw a conclusion the use of cloud computing technology will help us to solve the problems for disaster reduction and promote the development of disaster reduction.

  13. Increased oxygen pulse after lung volume reduction surgery is associated with reduced dynamic hyperinflation.

    Science.gov (United States)

    Lammi, Matthew R; Ciccolella, David; Marchetti, Nathaniel; Kohler, Malcolm; Criner, Gerard J

    2012-10-01

    Stroke volume augmentation during exercise is limited in chronic obstructive pulmonary disease patients because of decreased preload from dynamic hyperinflation (DH). We hypothesised that oxygen pulse and pulse pressure (PP) improve following lung volume reduction surgery (LVRS), and the magnitude of improvement correlates with reduction in DH. We compared 16 emphysema patients undergoing LVRS with six emphysema patients not undergoing LVRS. Oxygen pulse and PP were calculated from maximal cardiopulmonary exercise tests at baseline and 6 months. End-expiratory lung volume (EELV)/total lung capacity (TLC) represented DH. Comparisons were made between baseline and 6 months at metabolic isotimes (per cent maximal carbon dioxide production (V'(CO(2),max))). At baseline, the LVRS group was older with higher forced expiratory volume in 1 s, but had similar hyperinflation to the non-LVRS group. At 6 months, oxygen pulse (50%, 75%, and 100% V'(CO(2),max)) and PP (50% and 75% V'(CO(2),max)) increased in the LVRS, but not in the non-LVRS group. Baseline functional residual capacity/TLC inversely correlated with resting oxygen pulse (r= -0.449, p=0.04). Decreased EELV/TLC correlated with increased oxygen pulse at 75% (r= -0.487, p=0.02) and 100% V'(CO(2),max) (r= -0.548, p=0.008). LVRS led to increased oxygen pulse and PP during exercise at metabolic isotimes 6 months following surgery. Reductions in DH correlated with increases in oxygen pulse during exercise. Reducing lung volume may improve stroke volume response to exercise by decreasing DH.

  14. Effect of volume loading on the Frank-Starling relation during reductions in central blood volume in heat-stressed humans

    DEFF Research Database (Denmark)

    Bundgaard-Nielsen, Morten; Wilson, T E; Seifert, Thomas

    2010-01-01

    During reductions in central blood volume while heat stressed, a greater decrease in stroke volume (SV) for a similar decrease in ventricular filling pressure, compared to normothermia, suggests that the heart is operating on a steeper portion of a Frank-Starling curve. If so, volume loading...... of heat-stressed individuals would shift the operating point to a flatter portion of the heat stress Frank-Starling curve thereby attenuating the reduction in SV during subsequent decreases in central blood volume. To investigate this hypothesis, right heart catheterization was performed in eight males.......06). However, subsequent volume loading increased SV to 143 +/- 29 ml (P = 0.003). LBNP provoked a larger decrease in SV relative to the decrease in PCWP during heating (8.6 +/- 1.9 ml mmHg(1)) compared to normothermia (4.5 +/- 3.0 ml mmHg(1), P = 0.02). After volume loading while heat stressed, the reduction...

  15. MICROBIAL TRANSFORMATIONS OF TRU AND MIXED WASTES: ACTINIDE SPECIATION AND WASTE VOLUME REDUCTION

    Energy Technology Data Exchange (ETDEWEB)

    Francis, A.J.; Dodge, C.J.

    2006-06-01

    The overall goals of this research project are to determine the mechanism of microbial dissolution and stabilization of actinides in Department of Energy’s (DOE) TRU wastes, contaminated sludges, soils, and sediments. This includes (i) investigations on the fundamental aspects of microbially catalyzed radionuclide and metal transformations (oxidation/reduction reactions, dissolution, precipitation, chelation); (ii) understanding of the microbiological processes that control speciation and alter the chemical forms of complex inorganic/organic contaminant mixtures; and (iii) development of new and improved microbially catalyzed processes resulting in immobilization of metals and radionuclides in the waste with concomitant waste volume reduction.

  16. MICROBIAL TRANSFORMATIONS OF TRU AND MIXED WASTES: ACTINIDE SPECIATION AND WASTE VOLUME REDUCTION

    Energy Technology Data Exchange (ETDEWEB)

    Francis, A.J.; Dodge, C.J.

    2006-06-01

    The overall goals of this research project are to determine the mechanism of microbial dissolution and stabilization of actinides in Department of Energy's (DOE) TRU wastes, contaminated sludges, soils, and sediments. This includes (1) investigations on the fundamental aspects of microbially catalyzed radionuclide and metal transformations (oxidation/reduction reactions, dissolution, precipitation, chelation); (2) understanding of the microbiological processes that control speciation and alter the chemical forms of complex inorganic/organic contaminant mixtures; and (3) development of new and improved microbially catalyzed processes resulting in immobilization of metals and radionuclides in the waste with concomitant waste volume reduction.

  17. MICROBIAL TRANSFORMATIONS OF TRU AND MIXED WASTES: ACTINIDE SPECIATION AND WASTE VOLUME REDUCTION.

    Energy Technology Data Exchange (ETDEWEB)

    FRANCIS, A.J.; DODGE, C.J.

    2006-11-16

    The overall goals of this research project are to determine the mechanism of microbial dissolution and stabilization of actinides in Department of Energy's (DOE) TRU wastes, contaminated sludges, soils, and sediments. This includes (1) investigations on the fundamental aspects of microbially catalyzed radionuclide and metal transformations (oxidation/reduction reactions, dissolution, precipitation, chelation); (2) understanding of the microbiological processes that control speciation and alter the chemical forms of complex inorganic/organic contaminant mixtures; and (3) development of new and improved microbially catalyzed processes resulting in immobilization of metals and radionuclides in the waste with concomitant waste volume reduction.

  18. Measurement of breast volume is a useful supplement to select candidates for surgical breast reduction

    DEFF Research Database (Denmark)

    Ikander, Peder; Drejøe, Jennifer Berg; Lumholt, Pavia

    2014-01-01

    INTRODUCTION: The indication for breast reduction in a public welfare or an insurance paid setting depends on the severity of the subjective symptoms and the clinical evaluation. The purpose of this study was to evaluate the use of breast volume as an objective criterion to establish the indication...... for breast reduction surgery, thus establishing a standard decision basis that can be shared by surgeons and departments to secure patients fair and equal treatment opportunities. MATERIAL AND METHODS: A total of 427 patients who were referred to three Danish public hospitals with breast hypertrophy...

  19. Lateral frontal cortex volume reduction in Tourette syndrome revealed by VBM

    Directory of Open Access Journals (Sweden)

    Wittfoth Matthias

    2012-02-01

    Full Text Available Abstract Background Structural changes have been found predominantly in the frontal cortex and in the striatum in children and adolescents with Gilles de la Tourette syndrome (GTS. The influence of comorbid symptomatology is unclear. Here we sought to address the question of gray matter abnormalities in GTS patients with co-morbid obsessive-compulsive disorder (OCD and/or attention deficit hyperactivity disorder (ADHD using voxel-based morphometry (VBM in twenty-nine adult actually unmedicated GTS patients and twenty-five healthy control subjects. Results In GTS we detected a cluster of decreased gray matter volume in the left inferior frontal gyrus (IFG, but no regions demonstrating volume increases. By comparing subgroups of GTS with comorbid ADHD to the subgroup with comorbid OCD, we found a left-sided amygdalar volume increase. Conclusions From our results it is suggested that the left IFG may constitute a common underlying structural correlate of GTS with co-morbid OCD/ADHD. A volume reduction in this brain region that has been previously identified as a key region in OCD and was associated with the active inhibition of attentional processes may reflect the failure to control behavior. Amygdala volume increase is discussed on the background of a linkage of this structure with ADHD symptomatology. Correlations with clinical data revealed gray matter volume changes in specific brain areas that have been described in these conditions each.

  20. Lung protection: an intervention for tidal volume reduction in a teaching intensive care unit

    Science.gov (United States)

    Briva, Arturo; Gaiero, Cristina

    2016-01-01

    Objective To determine the effect of feedback and education regarding the use of predicted body weight to adjust tidal volume in a lung-protective mechanical ventilation strategy. Methods The study was performed from October 2014 to November 2015 (12 months) in a single university polyvalent intensive care unit. We developed a combined intervention (education and feedback), placing particular attention on the importance of adjusting tidal volumes to predicted body weight bedside. In parallel, predicted body weight was estimated from knee height and included in clinical charts. Results One hundred fifty-nine patients were included. Predicted body weight assessed by knee height instead of visual evaluation revealed that the delivered tidal volume was significantly higher than predicted. After the inclusion of predicted body weight, we observed a sustained reduction in delivered tidal volume from a mean (standard error) of 8.97 ± 0.32 to 7.49 ± 0.19mL/kg (p < 0.002). Furthermore, the protocol adherence was subsequently sustained for 12 months (delivered tidal volume 7.49 ± 0.54 versus 7.62 ± 0.20mL/kg; p = 0.103). Conclusion The lack of a reliable method to estimate the predicted body weight is a significant impairment for the application of a worldwide standard of care during mechanical ventilation. A combined intervention based on education and repeated feedbacks promoted sustained tidal volume education during the study period (12 months). PMID:27925055

  1. Efficiency Analysis of Technological Methods for Reduction of NOx Emissions while Burning Hydrocarbon Fuels in Heat and Power Plants

    Directory of Open Access Journals (Sweden)

    S. Kabishov

    2013-01-01

    Full Text Available The paper contains a comparative efficiency analysis pertaining to application of existing technological methods for suppression of nitric oxide formation in heating boilers of heat generators. A special attention has been given to investigation of NOx  emission reduction while burning hydrocarbon fuel with the help of oxygen-enriched air. The calculations have demonstrated that while enriching oxidizer with the help of oxygen up to 50 % (by volume it is possible to reduce volume of NOx formation (while burning fuel unit by 21 %.

  2. Salt reduction in sheeted dough: A successful technological approach.

    Science.gov (United States)

    Diler, Guénaëlle; Le-Bail, Alain; Chevallier, Sylvie

    2016-10-01

    The challenge of reducing the salt content while maintaining shelf life, stability and acceptability of the products is major for the food industry. In the present study, we implemented processing adjustments to reduce salt content while maintaining the machinability and the saltiness perception of sheeted dough: the homogeneous distribution of a layer of encapsulated salt grains on the dough during the laminating process. During sheeting, for an imposed deformation of 0.67, the final strain remained unchanged around 0.50 for salt reduction below 50%, and then, increased significantly up to 0.53 for a dough without salt. This increase is, in fine, positive regarding the rolling process since the decrease of salt content induces less shrinkage of dough downstream, which is the main feature to be controlled in the process. Moreover, the final strain was negatively correlated to the resistance to extension measured with a texture analyzer, therefore providing a method to evaluate the machinability of the dough. From these results, a salt reduction of 25% was achieved by holding 50% of the salt in the dough recipe to maintain the dough properties and saving 25% as salt grains to create high-salted areas that would enhance the saltiness perception of the dough. The distributor mounted above the rollers of the mill proved to be able to distribute evenly salt grains at a calculated step of the rolling out process. An innovative method based on RX micro-tomography allowed to follow the salt dissolving and to demonstrate the capability of the coatings to delay the salt dissolving and consequently the diffusion of salt within the dough piece. Finally, a ranking test on the salted perception of different samples having either an even distribution of encapsulated salt grains, a single layer of salt grains or a homogeneous distribution of salt, demonstrated that increasing the saltiness perception in salt-reduced food product could be achieved by a technological approach

  3. Hippocampal and caudate volume reductions in antipsychotic-naive first-episode schizophrenia

    DEFF Research Database (Denmark)

    Ebdrup, Bjørn Hylsebeck; Glenthøj, Birte; Rasmussen, Hans

    2010-01-01

    to be influenced by a history of substance abuse. Exploratory analyses indicated reduced volume of the nucleus accumbens in patients with first-episode schizophrenia. LIMITATIONS: This study was not a priori designed to test for differences between schizophrenia patients with or without lifetime substance abuse......BACKGROUND: Enlarged ventricles and reduced hippocampal volume are consistently found in patients with first-episode schizophrenia. Studies investigating brain structure in antipsychotic-naive patients have generally focused on the striatum. In this study, we examined whether ventricular...... enlargement and hippocampal and caudate volume reductions are morphological traits of antipsychotic-naive first-episode schizophrenia. METHODS: We obtained high-resolution 3-dimensional T1-weighted magnetic resonance imaging scans for 38 antipsychotic-naive first-episode schizophrenia patients and 43 matched...

  4. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part A, Characterization, decontamination, dismantlement

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This report is part A of Volume 3 concerning characterization, decontamination, and dismantlement.

  5. The technology on noise reduction of the APD detection circuit

    Science.gov (United States)

    Wu, Xue-ying; Zheng, Yong-chao; Cui, Jian-yong

    2013-09-01

    The laser pulse detection is widely used in the field of laser range finders, laser communications, laser radar, laser Identification Friend or Foe, et al, for the laser pulse detection has the advantage of high accuracy, high sensitivity and strong anti-interference. The avalanche photodiodes (APD) has the advantage of high quantum efficiency, high response speed and huge gain. The APD is particularly suitable for weak signal detection. The technology that APD acts as the photodetector for weak signal reception and amplification is widely used in laser pulse detection. The APD will convert the laser signal to weak electrical signal. The weak signal is amplified, processed and exported by the circuit. In the circuit design, the optimal signal detection is one key point in photoelectric detection system. The issue discusses how to reduce the noise of the photoelectric signal detection circuit and how to improve the signal-to-noise ratio, related analysis and practice included. The essay analyzes the mathematical model of the signal-to-noise ratio for photoelectric conversion and the noise of the APD photoelectric detection system. By analysis the bandwidth of the detection system is determined, and the circuit devices are selected that match the APD. In the circuit design separated devices with low noise are combined with integrated operational amplifier for the purpose of noise reduction. The methods can effectively suppress the noise, and improve the detection sensitivity.

  6. Severe Emphysema Treated by Endoscopic Bronchial Volume Reduction with Lung Sealant (AeriSeal

    Directory of Open Access Journals (Sweden)

    R. F. Falkenstern-Ge

    2013-01-01

    Full Text Available Endoscopic lung volume reduction using lung sealant is a very new and innovative treatment option for patients with severe progressive and irreversible lung emphysema. A 55-year-old ex-smoker (60 pack years referred to our center because of severe lung emphysema with progressive worsening of the obstructive ventilator pattern and clinical condition. We detected collateral channels of this patient by using the Chartis system. Therefore, we decided to treat the advanced emphysema of our patient with endoscopic volume reduction using lung sealant (AeriSeal. The foam of lung sealant AeriSeal is instilled into the peripheral airways and alveoli where it polymerizes and functions as tissue glue on the lung surface in order to seal the target region to cause durable irreversible absorption atelectasis. The follow-up evaluation 12 weeks later showed improved lung function (increased FEV 1/partial oxygen pressure/peripheral oxygen saturation and a reduction of TLC and RV with improved quality of life. Correlation between changes in primary and secondary outcome measures in the lung function parameters and 6-minute-walking test before and 12 weeks after the application of lung sealant revealed significant reduction of hyperinflation and improvement both in the flow rates and in the physical capability of this patient.

  7. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 2. Oil

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 2 contains papers from the following sessions: residual oil determination; thermal methods; heavy oil-tar sands; technology transfer; and carbon dioxide flooding. Individual papers were processed.

  8. Technology Directions for the 21st Century. Volume 3

    Science.gov (United States)

    Crimi, Giles F.; Botta, Robert; Ditanna, Thomas; Verheggen, Henry; Stancati, Michael; Feingold, Harvey; Jacobs, Mark

    1996-01-01

    New technologies will unleash the huge capacity of fiber-optic cable to meet growing demands for bandwidth. Companies will continue to replace private networks with public network bandwidth-on-demand. Although asynchronous transfer mode (ATM) is the transmission technology favored by many, its penetration will be slower than anticipated. Hybrid networks - e.g., a mix of ATM, frame relay, and fast Ethernet - may predominate, both as interim and long-term solutions, based on factors such as availability, interoperability, and cost. Telecommunications equipment and services prices will decrease further due to increased supply and more competition. Explosive Internet growth will continue, requiring additional backbone transmission capacity and enhanced protocols, but it is not clear who will fund the upgrade. Within ten years, space-based constellations of satellites in Low Earth orbit (LEO) will serve mobile users employing small, low-power terminals. 'Little LEO's' will provide packet transmission services and geo-position determination. 'Big LEO's' will function as global cellular telephone networks, with some planning to offer video and interactive multimedia services. Geosynchronous satellites also are proposed for mobile voice grade links and high-bandwidth services. NASA may benefit from resulting cost reductions in components, space hardware, launch services, and telecommunications services.

  9. Brain volume reduction predicts weight development in adolescent patients with anorexia nervosa.

    Science.gov (United States)

    Seitz, Jochen; Walter, Martin; Mainz, Verena; Herpertz-Dahlmann, Beate; Konrad, Kerstin; von Polier, Georg

    2015-09-01

    Acute anorexia nervosa (AN) is associated with marked brain volume loss potentially leading to neuropsychological deficits. However, the mechanisms leading to this brain volume loss and its influencing factors are poorly understood and the clinical relevance of these brain alterations for the outcome of these AN-patients is yet unknown. Brain volumes of 56 female adolescent AN inpatients and 50 healthy controls (HCs) were measured using MRI scans. Multiple linear regression analyses were used to determine the impact of body weight at admission, prior weight loss, age of onset and illness duration on volume loss at admission and to analyse the association of brain volume reduction with body weight at a 1-year follow-up (N = 25). Cortical and subcortical grey matter (GM) and cortical white matter (WM) but not cerebellar GM or WM were associated with low weight at admission. Amount of weight loss, age of onset and illness duration did not independently correlate with any volume changes. Prediction of age-adjusted standardized body mass index (BMI-SDS) at 1-year follow-up could be significantly improved from 34% of variance explained by age and BMI-SDS at admission to 47.5-53% after adding cortical WM, cerebellar GM or WM at time of admission. Whereas cortical GM changes appear to be an unspecific reflection of current body weight ("state marker"), cortical WM and cerebellar volume losses seem to indicate a longer-term risk (trait or "scar" of the illness), which appear to be important for the prediction of weight rehabilitation and long-term outcome. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Superior temporal gyrus volume reduction and P300 in schizophrenia prior to treatment

    Energy Technology Data Exchange (ETDEWEB)

    Hirayasu, Akira; Hokama, Hiroto; Ogura, Chikara; Ohta, Hirokazu; Arakaki, Hajime; Asato, Naohiko; Yamaguchi, Keiichiro [Ryukyus Univ., Nishihara, Okinawa (Japan). Faculty of Medicine

    1998-07-01

    Authors measured the superior temporal gyrus volume by 3D MRI imaging for the schizophrenics and simultaneously recorded the P300 component during the auditory odd-ball exercise. Subjects were 8 cases of schizophrenics and the sex- and age-matched healthy control adults. In schizophrenics, the superior temporal gyrus volume reduction was found. When the superior temporal gyrus was divided into two parts, the anterior part containing the primary auditory area, and the posterior part containing the planum temporale and the Wernicle speech area, the volume reduction of left side in the posterior part was remarkable. There was no difference in the latent time and the P300 amplitude between schizophrenics and healthy controls, suggesting that the superior temporal gyrus abnormalities will appear prior to P300 abnormalities. We could not find any correlation between findings of MRI and P300 and psychic symptoms. We discuss the possible contribution on the elucidation of the pathogenesis of the schizophrenia by simultaneous recordings of 3D MRI imaging and the event-related potentials. (K.H.)

  11. GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS FROM SELECTIVE CATALYTIC REDUCTIONS CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

    Science.gov (United States)

    The protocol describes the Environmental Technology Verification (ETV) Program's considerations and requirements for verification of emissions reduction provided by selective catalytic reduction (SCR) technologies. The basis of the ETV will be comparison of the emissions and perf...

  12. Quality of Life and Volume Reduction in Women with Secondary Lymphoedema Related to Breast Cancer

    Directory of Open Access Journals (Sweden)

    Marcus Lanza

    2015-01-01

    Full Text Available Purpose. To assess the quality of life (QOL as a predictor of volume reduction in women undergoing complex physical therapy (CPT for lymphoedema following breast cancer. Methods. Clinical trial in 57 women undergoing CPT. Results. At baseline, in measuring quality of life for the EORTC QLQ-C30 questionnaire subscale of functionality, the worst scores for emotional function (55 points and better social function (89 points were observed. The symptom scales showed the worst pain averaged (66 points. The overall quality of life showed a low score (40 points. In the BR 23 module, low scores were observed in the field of future perspective (47 points. After treatment of lymphoedema, absolute reduction of excess volume between the upper limbs of 282 mL was observed, representing a reduction of 15%. No association was observed between the domains of quality of life and response to treatment of lymphoedema. Conclusion. This study included 57 women with advanced and chronic lymphoedema in early treatment with CPT and low scores for quality of life. The lymphoedema therapeutic response was not influenced by the QOL at the beginning of treatment.

  13. Effect of blood donation-mediated volume reduction on regional right ventricular deformation in healthy subjects.

    Science.gov (United States)

    Açar, Göksel; Alizade, Elnur; Avci, Anıl; Cakir, Hakan; Efe, Suleyman Cagan; Kalkan, Mehmet Emin; Tabakci, Mehmet Mustafa; Toprak, Cuneyt; Tanboğa, Ibrahim Halil; Esen, Ali Metin

    2014-03-01

    Strain (S) and strain rate (SR) are known to be altered in diseases associated with right ventricular (RV) pressure/volume overload and RV myocardial dysfunction; however determinants of S/SR are incompletely understood. The aim of this study was to examine the effect of blood donation-mediated volume reduction on regional RV deformation in healthy young adults. Study population was composed of 61 consecutive healthy subjects who were volunteers for blood donation. All underwent standard echocardiography and two-dimensional S and SR imaging by speckle tracking before and after 450 mL blood donation. We found no change in RV lateral wall SR in all three segments. However, the S in the apical and mid segments of the RV lateral wall immediately decreased after blood donation [-26.2 ± 3.3 vs. -23.2 ± 3.3 % (p subjects caused a regional difference in RV longitudinal deformation with the lower mid and apical S that was related to parameters of volume load severity. However, RV systolic SR was found to be resistant to the effects of volume depletion.

  14. Gray Matter Volume Reduction Is Associated with Cognitive Impairment in Neuromyelitis Optica.

    Science.gov (United States)

    Wang, Q; Zhang, N; Qin, W; Li, Y; Fu, Y; Li, T; Shao, J; Yang, L; Shi, F-D; Yu, C

    2015-10-01

    Whether gray matter impairment occurs in neuromyelitis optica is a matter of ongoing debate, and the association of gray matter impairment with cognitive deficits remains largely unknown. The purpose of this study was to investigate gray matter volume reductions and their association with cognitive decline in patients with neuromyelitis optica. This study included 50 patients with neuromyelitis optica and 50 sex-, age-, handedness-, and education-matched healthy subjects who underwent high-resolution structural MR imaging examinations and a battery of cognitive assessments. Gray matter volume and cognitive differences were compared between the 2 groups. The correlations of the regional gray matter volume with cognitive scores and clinical variables were explored in the patients with neuromyelitis optica. Compared with healthy controls (635.9 ± 51.18 mL), patients with neuromyelitis optica (602.8 ± 51.03 mL) had a 5.21% decrease in the mean gray matter volume of the whole brain (P optica affected the frontal and temporal cortices and the right thalamus (false discovery rate correction, P optica (Alphasim correction, P optica had impairments in memory, information processing speed, and verbal fluency (P optica and is associated with cognitive impairment and disease severity in this group. © 2015 by American Journal of Neuroradiology.

  15. [Bronchoscopic lung volume reduction is a treatment offered to patients with severe heterogenous emphysema].

    Science.gov (United States)

    Perch, Michael; Titlestad, Ingrid L; Rychwicha-Kielek, Beata A; Bendstrup, Elisabeth; Iversen, Martin; Siemsen, Mette; Jørgensen, Ole D; Haahr, Poul Erik

    2014-07-14

    Introduction of bronchoscopic lung volume reduction as a treatment for severe emphysema has been defined as an area of development by The Danish Health and Medicines Authority. We here present the rationale for treatment, in- and exclusion criteria, and ultimately the organization for assessment, treatment and follow-up in Denmark. The treatment aim is to lower dyspnoea. There is a national protocol for patient selection according to in- and exclusion criteria. Different commercial devices are available, but endobronchial valves have been the devices mostly applied. A national database has been established to evaluate cost-effectiveness.

  16. Lung Volume Reduction Coil Treatment in Chronic Obstructive Pulmonary Disease Patients with Homogeneous Emphysema : A Prospective Feasibility Trial

    NARCIS (Netherlands)

    Klooster, Karin; ten Hacken, Nick H. T.; Franz, Ina; Kerstjens, Huib A. M.; van Rikxoort, Eva M.; Slebos, Dirk-Jan

    2014-01-01

    Background: In patients with heterogeneous emphysema, surgical and bronchoscopic lung volume reduction (LVR) treatments are available. However, for patients with homogeneous emphysema these treatments are hardly investigated and seem less effective. Bronchoscopic LVR coil treatment has been shown to

  17. Lung Volume Reduction Coil Treatment in Chronic Obstructive Pulmonary Disease Patients with Homogeneous Emphysema: A Prospective Feasibility Trial

    NARCIS (Netherlands)

    Klooster, K.; Hacken, N. Ten; Franz, I.; Kerstjens, H.; Rikxoort, E.M. van; Slebos, D.J.

    2014-01-01

    Background: In patients with heterogeneous emphysema, surgical and bronchoscopic lung volume reduction ({LVR}) treatments are available. However, for patients with homogeneous emphysema these treatments are hardly investigated and seem less effective. Bronchoscopic {LVR} coil treatment has been show

  18. Lung Volume Reduction Coil Treatment in Chronic Obstructive Pulmonary Disease Patients with Homogeneous Emphysema : A Prospective Feasibility Trial

    NARCIS (Netherlands)

    Klooster, Karin; ten Hacken, Nick H. T.; Franz, Ina; Kerstjens, Huib A. M.; van Rikxoort, Eva M.; Slebos, Dirk-Jan

    2014-01-01

    Background: In patients with heterogeneous emphysema, surgical and bronchoscopic lung volume reduction (LVR) treatments are available. However, for patients with homogeneous emphysema these treatments are hardly investigated and seem less effective. Bronchoscopic LVR coil treatment has been shown to

  19. Obesity is associated with increased prostate growth and attenuated prostate volume reduction by dutasteride.

    Science.gov (United States)

    Muller, Roberto L; Gerber, Leah; Moreira, Daniel M; Andriole, Gerald; Hamilton, Robert J; Fleshner, Neil; Parsons, J Kellogg; Freedland, Stephen J

    2013-06-01

    Although obesity has been associated with larger prostate volumes (PV), few studies have actually investigated whether obesity enhances PV growth, especially among men using 5α-reductase inhibitors. To examine whether obesity is associated with enhanced PV growth measured by serial transrectal ultrasound (TRUS) measurements. We conducted a secondary analysis of the REduction by DUtasteride of prostate Cancer Events (REDUCE) trial, which was originally aimed at cancer risk reduction among high-risk men with a single negative prestudy biopsy. Per-protocol randomization to placebo or dutasteride and mandatory TRUS-guided biopsies at 2 yr and 4 yr. Percentage change in PV at 2 yr and 4 yr from baseline. We tested its association with baseline body mass index (BMI) groups of Obesity enhanced PV growth and attenuated PV reduction by dutasteride. The null interaction between obesity and dutasteride for PV change implies that the effect of obesity on dutasteride-treated men is likely a combination of dutasteride-driven PV reduction with obesity-driven PV growth rather than decreased dutasteride efficacy. Copyright © 2013 European Association of Urology. All rights reserved.

  20. 2,3-Dihydroxybenzoic acid attenuates kanamycin-induced volume reduction in mouse utricular type I hair cells

    DEFF Research Database (Denmark)

    Severinsen, Stig Åvall; Kirkegaard, Mette; Nyengaard, Jens Randel

    2006-01-01

    injection. Total volume of the utricle, as well as total number of hair and supporting cells, were estimated on light microscopic sections. Total volume and mean volume of hair cell types I and II and supporting cells were estimated on digital transmission electron micrographs. Total volume of the utricular...... macula, hair cell type I and supporting cells decreased significantly in animals injected with kanamycin but not in animals co-treated with DHB. Hair and supporting cell numbers remained unchanged in all three groups. In conclusion, the kanamycin-induced volume reduction of type I hair cells...

  1. Propulsion Noise Reduction Research in the NASA Advanced Air Transport Technology Project

    Science.gov (United States)

    Van Zante, Dale; Nark, Douglas; Fernandez, Hamilton

    2017-01-01

    The Aircraft Noise Reduction (ANR) sub-project is focused on the generation, development, and testing of component noise reduction technologies progressing toward the NASA far term noise goals while providing associated near and mid-term benefits. The ANR sub-project has efforts in airframe noise reduction, propulsion (including fan and core) noise reduction, acoustic liner technology, and propulsion airframe aeroacoustics for candidate conventional and unconventional aircraft configurations. The current suite of propulsion specific noise research areas is reviewed along with emerging facility and measurement capabilities. In the longer term, the changes in engine and aircraft configuration will influence the suite of technologies necessary to reduce noise in next generation systems.

  2. Lung volume reduction surgery for emphysema: Radiologic findings; Valutazione radiologica nell`intervento di riduzione del volume polmonare per enfisema

    Energy Technology Data Exchange (ETDEWEB)

    Bonfioli, Claudio; Motta, Fabio; Bergonzi, Marco; Urani, Antonio; Montali, Giuseppe [Ospedale Generale `San Giuseppe`, Milan (Italy). Servizio di Radiologia; Varoli, Federico; Vergani, Contardo; Roviaro, Gian Carlo [Ospedale Generale `San Giuseppe`, Milan (Italy). Divisione di Chirurgia

    1997-04-01

    Aim of this work is to present and discuss the radiologic protocol they have developed for the preoperative assessment of patients with severe pulmonary emphysema candidate to lung volume reduction surgery (LVRS). The operation aims at improving respiratory mechanics and reducing small airway obstruction by removing variable amounts of emphysematous parenchyma. January to September, 1996, twelve patients were submitted to LVRS. Before surgery all patients were examined with standard chest radiographs during maximal inspiration and expiration, chest Computed Tomography (CT), High Resolution Computed Tomography (HRCT) and air trapping quantitation on HRCT scans. Diaphragm and chest wall excursions, patterns, site and distribution of emphysema, as well as heterogeneity were investigated, Air trapping was quantitate with a dedicated software. Post-operative studies were carried out 2 months later in 6 patients and included: maximal inspiratory and expiratory chest radiographs and air trapping assessment on 3 standardized HRCT scans. All parameters considered improved in every patient. Radiologic studies proved to be of crucial importance for patient selection and LVRS planning. The diagnostic protocol adopted in their Hospital appears a valuable tool for both pre- and post-operative assessment of the patients candidate to LVRS.

  3. Does a volume reduction of the parietal lobe contribute to freezing of gait in Parkinson's disease?

    Science.gov (United States)

    Rubino, Alfonso; Assogna, Francesca; Piras, Fabrizio; Di Battista, Maria Elena; Imperiale, Francesca; Chiapponi, Chiara; Spalletta, Gianfranco; Meco, Giuseppe

    2014-10-01

    Freezing of gait (FOG) is as a brief, episodic absence or marked reduction of forward progression of the feet despite the intention to walk. Structural neuroimaging studies on FOG in PD using volumetric techniques yielded variable and partially conflicting findings, probably reflecting the heterogeneity and complexity of the phenomenon. The aim of this study was to further explore the differences in local gray matter (GM) volume in patients with PD with and without FOG by using Voxel-Based Morphometry (VBM). We enrolled 26 patients (7 women and 19 men) with a diagnosis of PD in stable treatment with dopaminergic therapy. Thirteen patients classified as FOG+ were matched with thirteen non-freezer (FOG-) PD patients. All 26 participants underwent a detailed neuropsychological assessment as well as a VBM analysis derived from T1 weighted 3T MRI. The patient groups did not significantly differ for age, disease duration, H&Y stage, UPDRS part-III or educational attainment. No significant differences of cognitive profile emerged. PD-FOG+ patients showed a pattern of relative GM atrophy in left posterior parietal gyrus compared with PD-FOG-. Our results suggest that a specific pattern of cortical volume reduction involving posterior parietal cortex contributes to the occurrence of FOG in PD. These data agree with the growing body of evidence considering the parietal posterior cortex as an associative area involved in spatial control of motor behavior, par-taking in response selection to sensory evaluation. Copyright © 2014. Published by Elsevier Ltd.

  4. Inspiratory and expiratory computed tomographic volumetry for lung volume reduction surgery.

    Science.gov (United States)

    Morimura, Yuki; Chen, Fengshi; Sonobe, Makoto; Date, Hiroshi

    2013-06-01

    Three-dimensional (3D) computed tomographic (CT) volumetry has been introduced into the field of thoracic surgery, and a combination of inspiratory and expiratory 3D-CT volumetry provides useful data on regional pulmonary function as well as the volume of individual lung lobes. We report herein a case of a 62-year-old man with severe emphysema who had undergone lung volume reduction surgery (LVRS) to assess this technique as a tool for the evaluation of regional lung function and volume before and after LVRS. His postoperative pulmonary function was maintained in good condition despite a gradual slight decrease 2 years after LVRS. This trend was also confirmed by a combination of inspiratory and expiratory 3D-CT volumetry. We confirm that a combination of inspiratory and expiratory 3D-CT volumetry might be effective for the preoperative assessment of LVRS in order to determine the amount of lung tissue to be resected as well as for postoperative evaluation. This novel technique could, therefore, be used more widely to assess local lung function.

  5. Achieving cost reductions in EOSDIS operations through technology evolution

    Science.gov (United States)

    Newsome, Penny; Moe, Karen; Harberts, Robert

    1996-01-01

    The earth observing system (EOS) data information system (EOSDIS) mission includes the cost-effective management and distribution of large amounts of data to the earth science community. The effect of the introduction of new information system technologies on the evolution of EOSDIS is considered. One of the steps taken by NASA to enable the introduction of new information system technologies into the EOSDIS is the funding of technology development through prototyping. Recent and ongoing prototyping efforts and their potential impact on the performance and cost-effectiveness of the EOSDIS are discussed. The technology evolution process as it related to the effective operation of EOSDIS is described, and methods are identified for the support of the transfer of relevant technology to EOSDIS components.

  6. Dimensionality Reduction on Multi-Dimensional Transfer Functions for Multi-Channel Volume Data Sets

    Science.gov (United States)

    Kim, Han Suk; Schulze, Jürgen P.; Cone, Angela C.; Sosinsky, Gina E.; Martone, Maryann E.

    2011-01-01

    The design of transfer functions for volume rendering is a non-trivial task. This is particularly true for multi-channel data sets, where multiple data values exist for each voxel, which requires multi-dimensional transfer functions. In this paper, we propose a new method for multi-dimensional transfer function design. Our new method provides a framework to combine multiple computational approaches and pushes the boundary of gradient-based multi-dimensional transfer functions to multiple channels, while keeping the dimensionality of transfer functions at a manageable level, i.e., a maximum of three dimensions, which can be displayed visually in a straightforward way. Our approach utilizes channel intensity, gradient, curvature and texture properties of each voxel. Applying recently developed nonlinear dimensionality reduction algorithms reduces the high-dimensional data of the domain. In this paper, we use Isomap and Locally Linear Embedding as well as a traditional algorithm, Principle Component Analysis. Our results show that these dimensionality reduction algorithms significantly improve the transfer function design process without compromising visualization accuracy. We demonstrate the effectiveness of our new dimensionality reduction algorithms with two volumetric confocal microscopy data sets. PMID:21841914

  7. Flat-panel volume CT: fundamental principles, technology, and applications.

    Science.gov (United States)

    Gupta, Rajiv; Cheung, Arnold C; Bartling, Soenke H; Lisauskas, Jennifer; Grasruck, Michael; Leidecker, Christianne; Schmidt, Bernhard; Flohr, Thomas; Brady, Thomas J

    2008-01-01

    Flat-panel volume computed tomography (CT) systems have an innovative design that allows coverage of a large volume per rotation, fluoroscopic and dynamic imaging, and high spatial resolution that permits visualization of complex human anatomy such as fine temporal bone structures and trabecular bone architecture. In simple terms, flat-panel volume CT scanners can be thought of as conventional multidetector CT scanners in which the detector rows have been replaced by an area detector. The flat-panel detector has wide z-axis coverage that enables imaging of entire organs in one axial acquisition. Its fluoroscopic and angiographic capabilities are useful for intraoperative and vascular applications. Furthermore, the high-volume coverage and continuous rotation of the detector may enable depiction of dynamic processes such as coronary blood flow and whole-brain perfusion. Other applications in which flat-panel volume CT may play a role include small-animal imaging, nondestructive testing in animal survival surgeries, and tissue-engineering experiments. Such versatility has led some to predict that flat-panel volume CT will gain importance in interventional and intraoperative applications, especially in specialties such as cardiac imaging, interventional neuroradiology, orthopedics, and otolaryngology. However, the contrast resolution of flat-panel volume CT is slightly inferior to that of multidetector CT, a higher radiation dose is needed to achieve a comparable signal-to-noise ratio, and a slower scintillator results in a longer scanning time.

  8. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  9. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  10. Market structure and technology diffusion incentives under emission taxes and emission reduction subsidies

    NARCIS (Netherlands)

    de Vries, F.P.

    2007-01-01

    This paper compares emission taxes with emission reduction subsidies regarding the incentives they create to enhance technology diffusion under imperfect competition. Finns can adopt a "dirty" technology or a "clean" abatement technology. If the clean and dirty products are perfect substitutes, and

  11. Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.

  12. The Efficacy of Neoadjuvant Androgen Deprivation Therapy as a Prostate Volume Reduction before Brachytherapy for Clinically Localized Prostate Cancer

    Directory of Open Access Journals (Sweden)

    Miki,Kenta

    2007-12-01

    Full Text Available From September 2003 to December 2005, 188 patients who visited our hospital and allied institutions for the purpose of prostate brachytherapy were administrated hormonal therapy for volume reductions before brachytherapy. The pretreatment and posttreatment of prostate volume using a transrectal ultrasound volumetric study and the types and duration of hormonal therapy were analyzed. We administered 91 patients with Luteinizing hormone-releasing hormone (LH-RH agonist, 49 patients with anti-androgen (bicaltamide/flutamide, and 48 patients with maximum androgen blockade (MAB. The duration of the hormonal therapy was 1-3 months for 49 patients, 4-6 months for 59 patients, 7-9 months for 40 patients, 10-12 months for 32 patients, and over 13 months for 8 patients. Before the initiation of hormonal therapy, the mean prostate volume was 35.12 ml (11.04-78.71 ml, and the average of prostate volume before and after hormonal therapy was 36.79 ml and 24.79 ml, respectively (a 32.4% reduction. The prostate volume reduction rate was 32.0% for the LH-RH agonist only, 18.1% for the anti-androgen only and 41.2% for the MAB. No statistically significant difference was observed for the duration of hormonal therapy between 3 groups. A three-month course of the neoadjuvant LH-RH agonist indicated a sufficient volume reduction effectiveness for a large prostate volume.

  13. An assessment of propeller aircraft noise reduction technology

    Science.gov (United States)

    Metzger, F. Bruce

    1995-01-01

    This report is a review of the literature regarding propeller airplane far-field noise reduction. Near-field and cabin noise reduction are not specifically addressed. However, some of the approaches used to reduce far-field noise produce beneficial effects in the near-field and in the cabin. The emphasis is on propeller noise reduction but engine exhaust noise reduction by muffling is also addressed since the engine noise becomes a significant part of the aircraft noise signature when propeller noise is reduced. It is concluded that there is a substantial body of information available that can be used as the basis to reduce propeller airplane noise. The reason that this information is not often used in airplane design is the associated weight, cost, and performance penalties. It is recommended that the highest priority be given to research for reducing the penalties associated with lower operating RPM and propeller diameter while increasing the number of blades. Research to reduce engine noise and explore innovative propeller concepts is also recommended.

  14. Validation of a reaction volume reduction protocol for analysis of Y chromosome haplotypes targeting DNA databases.

    Science.gov (United States)

    Souza, C A; Oliveira, T C; Crovella, S; Santos, S M; Rabêlo, K C N; Soriano, E P; Carvalho, M V D; Junior, A F Caldas; Porto, G G; Campello, R I C; Antunes, A A; Queiroz, R A; Souza, S M

    2017-04-28

    The use of Y chromosome haplotypes, important for the detection of sexual crimes in forensics, has gained prominence with the use of databases that incorporate these genetic profiles in their system. Here, we optimized and validated an amplification protocol for Y chromosome profile retrieval in reference samples using lesser materials than those in commercial kits. FTA(®) cards (Flinders Technology Associates) were used to support the oral cells of male individuals, which were amplified directly using the SwabSolution reagent (Promega). First, we optimized and validated the process to define the volume and cycling conditions. Three reference samples and nineteen 1.2 mm-diameter perforated discs were used per sample. Amplification of one or two discs (samples) with the PowerPlex(®) Y23 kit (Promega) was performed using 25, 26, and 27 thermal cycles. Twenty percent, 32%, and 100% reagent volumes, one disc, and 26 cycles were used for the control per sample. Thereafter, all samples (N = 270) were amplified using 27 cycles, one disc, and 32% reagents (optimized conditions). Data was analyzed using a study of equilibrium values between fluorophore colors. In the samples analyzed with 20% volume, an imbalance was observed in peak heights, both inside and in-between each dye. In samples amplified with 32% reagents, the values obtained for the intra-color and inter-color standard balance calculations for verification of the quality of the analyzed peaks were similar to those of samples amplified with 100% of the recommended volume. The quality of the profiles obtained with 32% reagents was suitable for insertion into databases.

  15. IR Drop Analysis and Its Reduction Techniques in Deep Submicron Technology

    Directory of Open Access Journals (Sweden)

    Vanpreet Kaur

    2015-01-01

    Full Text Available This paper presents a detailed conceptual analysis of IR Drop effect in deep submicron technologies and its reduction techniques. The IR Drop effect in power/ground network increases rapidly with technology scaling. This affects the timing of the design and hence the desired speed. It is shown that in present day designs, using well known reduction techniques such as wire sizing and decoupling capacitor insertion, may not be sufficient to limit the voltage fluctuations and hence, two more important methods such as selective glitch reduction technique and IR Drop reduction through combinational circuit partitioning are discussed and the issues related to all the techniques are revised.

  16. Technology Evaluation for Conditioning of Hanford Tank Waste Using Solids Segregation and Size Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Restivo, Michael L.; Stone, M. E.; Herman, D. T.; Lambert, Daniel P.; Duignan, Mark R.; Smith, Gary L.; Wells, Beric E.; Lumetta, Gregg J.; Enderlin, Carl W.; Adkins, Harold E.

    2014-04-24

    The Savannah River National Laboratory and the Pacific Northwest National Laboratory team performed a literature search on current and proposed technologies for solids segregation and size reduction of particles in the slurry feed from the Hanford Tank Farm. The team also investigated technology research performed on waste tank slurries, both real and simulated, and reviewed academic theory applicable to solids segregation and size reduction. This review included text book applications and theory, commercial applications suitable for a nuclear environment, research of commercial technologies suitable for a nuclear environment, and those technologies installed in a nuclear environment, including technologies implemented at Department of Energy facilities. Information on each technology is provided in this report along with the advantages and disadvantages of the technologies for this application. Any technology selected would require testing to verify the ability to meet the High-Level Waste Feed Waste Acceptance Criteria to the Hanford Tank Waste Treatment and Immobilization Plant Pretreatment Facility.

  17. Lung volume reduction surgery for the management of refractory dyspnea in chronic obstructive pulmonary disease.

    Science.gov (United States)

    Shah, Asad A; D'Amico, Thomas A

    2009-06-01

    This review describes the role of lung volume reduction surgery (LVRS) for the management of refractory dyspnea and other debilitating conditions in patients with chronic obstructive pulmonary disease. Recent studies, including a randomized trial comparing LVRS to medical therapy, are analyzed. LVRS plus optimal medical therapy is superior to medical therapy alone in treating certain subsets of patients with severe emphysema. In patients with predominantly upper lobe emphysema and low-exercise capacity, LVRS not only improves symptoms of dyspnea and exercise intolerance, but also is associated with improved survival. Furthermore, LVRS has recently been shown to be superior to medical therapy in improving other quality of life parameters, such as nutritional status, sleep quality, and the frequency of chronic obstructive pulmonary disease (COPD) exacerbations in patients with severe emphysema. LVRS is an effective strategy in the treatment of properly selected patients with COPD, improving survival and quality of life, including exercise tolerance, dyspnea, oxygen requirement and functional status.

  18. Interventional pulmonology for asthma and emphysema: bronchial thermoplasty and bronchoscopic lung volume reduction.

    Science.gov (United States)

    Miller, Russell J; Murgu, Septimiu D

    2014-12-01

    Emphysema and asthma are responsible for economic and social burden. Altering the natural course of these diseases is a field of intense research. The National Emphysema Treatment Trial showed that lung volume reduction surgery (LVRS) could significantly reduce both morbidity and mortality in properly selected patients. LVRS is seldom performed, however, due to the high morbidity associated with the surgery. Numerous bronchoscopic interventions have been introduced with the goal of providing the clinical benefits of LVRS without the surgical complications. Thus far, these modalities have not produced the results once hoped. However, through active modification of both technique and patient selection, the role of minimally invasive modalities in the treatment of emphysema continues to evolve. Bronchial thermoplasty (BT) is a method of delivering controlled heat to airway mucosa with the goal of reducing airway smooth muscle mass and hence bronchoconstriction. In patients suffering from asthma who cannot achieve control with standard medical care, BT has been shown to be safe and improves symptoms, with long lasting benefit. BT does not seem to affect traditional markers of asthma severity such as forced expiratory volume in 1 second and questions remain regarding proper patient selection for this therapy and its true physiologic effects. This article is a review of bronchoscopic modalities for emphysema and asthma.

  19. Clinical study of simultaneous lung volume reduction surgery during resection of pulmonary or esophageal neoplasms

    Institute of Scientific and Technical Information of China (English)

    TANG Yi-jun; WANG Chao-yang; WANG Cheng-de; DONG Yao-zhong

    2009-01-01

    Background If the emphysema lesions are not symmetrical, unilateral lung volume reduction surgery (LVRS) can be carried out on the more severe side. The aim of this research was to evaluate the feasibility and effects of LVRS performed simultaneously with resection of pulmonary and esophageal neoplasms.Methods Forty-five patients with pulmonary neoplasm and 37 patients with esophageal neoplasm were randomly assigned to group A or group B. In group A, LVRS was performed simultaneously on the same side as thoracotomy. In group B, only tumor resection was performed. The nonfunctional lung area was determined by preoperative chest computed tomography and lung ventilation/perfusion scan. The lung volume removed was about 20% to 30% of the lobes on one side. Preoperative and postoperative indexes including pulmonary function testing variables, arterial blood gas analysis variables, dyspnea scale, 6-minute walk distance, etc., were compared between the groups.Results There were no surgical deaths in this study. The postoperative forced vital capacity in 1 second, PaO_2, PaCO_2,dyspnea scale, and 6-minute walk distance were improved significantly in group A, whereas these indexes did not change or decreased slightly in group B.Conclusions For tumor patients who have associated emphysema, simultaneous LVRS not only increases the chance of receiving surgical therapy, but also improves the postoperative quality of life of the patient. LVRS has expanded thesurgical indication for tumor patients.

  20. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-19

    This volume of the 4-volume ISTUM documentation gives information on the individual technology specifications. The first chapter presents a general overview of the ISTUM technology data bases. It includes an explanation of the data-base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters document the specific-technology-cost specifications. Boiler technologies (conventional coal steam, conventional natural gas and oil in the steam-service sector, black liquor and wood boilers, and space-heat service sector) and non-boiler conventional technologies (natural gas non-boiler, oil-fired non-boiler, coal-fired non-boiler technologies and non-boiler primary system costs) are covered in Chapter II. Chapter III, Fossil Energy Technologies, covers atmospheric fluidized-bed combustion, low-Btu gasification of coal, and medium-Btu gasification. Chapter IV, Cogeneration and Self-Generation Technologies, covers the steam service sector, machine-drive service sector, and electrolytic service sector. Solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies) are covered in Chapter V, while Chapter VI covers conservation technologies. (MCW)

  1. Waste assay and mass balance for the decontamination and volume reduction system at LANL

    Energy Technology Data Exchange (ETDEWEB)

    Gruetzmacher, Kathleen M.; Ferran, Scott G.; Garner, Scott E.; Romero, Mike J.; Christensen, Davis V.; Bustos, Roland M.

    2003-07-01

    The Decontamination and Volume Reduction System (DVRS) operated by the Solid Waste Operations (SWO) Group at Los Alamos National Laboratory (LANL) processes large volume, legacy radioactive waste items. Waste boxes, in sizes varying from 4 ft x 4 ft x 8 ft to 10 ft x 12 ft x 40 ft, are assayed prior to entry into the processing building. Inside the building, the waste items are removed from their container, decontaminated and/or size reduced if necessary, and repackaged for shipment to the Waste Isolation Pilot Plant (WIPP) or on-site low-level waste disposal. The repackaged items and any secondary waste produced (e.g., personal protective equipment) are assayed again at the end of the process and a mass balance is done to determine whether there is any significant hold-up material left in the DVRS building. The DVRS building is currently classed as a radiological facility, with a building limit of 0.52 Ci of Pu239 and Am241, and 0.62 Ci of Pu238, the most common radionuclides processed. This requires tight controls on the flow of nuclear material. The large volume of the initial waste packages, the (relatively) small amounts of radioactive material in them, and the tight ceiling on the building inventory require accurate field measurements of the nuclear material. This paper describes the radioactive waste measurement techniques, the computer modeling used to determine the amount of nuclear material present in a waste package, the building inventory database, and the DVRS process itself. Future plans include raising the limit on the nuclear material inventory allowed in the building to accommodate higher activity waste packages. All DOE sites performing decontamination and decommissioning of radioactive process equipment face challenges related to waste assay and inventory issues. This paper describes an ongoing operation, incorporating lessons learned over the life of the project to date.

  2. Developmentally Stable Whole-Brain Volume Reductions and Developmentally Sensitive Caudate and Putamen Volume Alterations in Those With Attention-Deficit/Hyperactivity Disorder and Their Unaffected Siblings

    NARCIS (Netherlands)

    Greven, Corina U.; Bralten, Janita; Mennes, Maarten; O'Dwyer, Laurence; van Hulzen, Kimm J. E.; Rommelse, Nanda; Schweren, Lizanne J. S.; Hoekstra, Pieter J.; Hartman, Catharina A.; Heslenfeld, Dirk; Oosterlaan, Jaap; Faraone, Stephen V.; Franke, Barbara; Zwiers, Marcel P.; Arias-Vasquez, Alejandro; Buitelaar, Jan K.

    2015-01-01

    IMPORTANCE Attention-deficit/hyperactivity disorder (ADHD) is a heritable neurodevelopmental disorder. It has been linked to reductions in total brain volume and subcortical abnormalities. However, owing to heterogeneity within and between studies and limited sample sizes, findings on the neuroanato

  3. Clean Coal Technology Programs: Program Update 2003 (Volume 1)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  4. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  5. Recent Progress in Data Engineering and Internet Technology Volume 1

    CERN Document Server

    Gaol, Ford Lumban

    2013-01-01

    The latest inventions in internet technology influence most of business and daily activities. Internet security, internet data management, web search, data grids, cloud computing, and web-based applications play vital roles, especially in business and industry, as more transactions go online and mobile. Issues related to ubiquitous computing are becoming critical.   Internet technology and data engineering should reinforce efficiency and effectiveness of business processes. These technologies should help people make better and more accurate decisions by presenting necessary information and possible consequences for the decisions. Intelligent information systems should help us better understand and manage information with ubiquitous data repository and cloud computing.   This book is a compilation of some recent research findings in Internet Technology and Data Engineering. This book provides state-of-the-art accounts in computational algorithms/tools, database management and database technologies,  intelli...

  6. Recent Progress in Data Engineering and Internet Technology Volume 2

    CERN Document Server

    Gaol, Ford Lumban

    2012-01-01

    The latest inventions in internet technology influence most of business and daily activities. Internet security, internet data management, web search, data grids, cloud computing, and web-based applications play vital roles, especially in business and industry, as more transactions go online and mobile. Issues related to ubiquitous computing are becoming critical.   Internet technology and data engineering should reinforce efficiency and effectiveness of business processes. These technologies should help people make better and more accurate decisions by presenting necessary information and possible consequences for the decisions. Intelligent information systems should help us better understand and manage information with ubiquitous data repository and cloud computing.   This book is a compilation of some recent research findings in Internet Technology and Data Engineering. This book provides state-of-the-art accounts in computational algorithms/tools, database management and database technologies,  intelli...

  7. Investment Strategy of Emission-Reduction Technology in a Supply Chain

    Directory of Open Access Journals (Sweden)

    Gao Xiang Lou

    2015-08-01

    Full Text Available Greenhouse gas emissions have serious impacts on the natural environment. Therefore, the restrictions imposed on carbon emission force enterprises to take carbon emission into consideration when making production decisions. In this paper, in the context of allowing emission trading and investment of emission reduction technology, models were presented for a two-stage supply chain to analyze the optimal investment and pricing decisions. The results indicate that manufacturer’s endurance capacity of reduction difficulty is higher in the cooperation model than in the Stackelberg game model, and that perfect coordination of supply chains can be realized by a revenue sharing contract. From the perspective of a consumer, low-carbon products mean higher price, so that subsidies or tax exemptions should be provided to keep low prices. Meanwhile, the government can promote investment in emission-reduction technologies and achieve its emission reduction targets by controlling emission trading price, strengthening emission reduction publicity and providing technology investment subsidies.

  8. Improved Filtration Technology for Pathogen Reduction in Rural Water Supplies

    Directory of Open Access Journals (Sweden)

    Valentine Tellen

    2010-06-01

    Full Text Available Intermittent bio-sand filtration (BSF is a low-cost process for improving water quality in rural households. This study addresses its two drawbacks: flow limitations requiring excessive waiting, and inadequate purification when high flows are imposed. Two modifications were examined: increasing the sand’s effective size, and adding zero-valent iron (ZVI into the media as a disinfectant. After 65 days, percent reductions in total coliform, fecal coliform, and fecal streptococci averaged 98.9% for traditional BSF and 99% for the improved BSF. Both modifications showed statistically significant improvements. Increased sand size and ZVI addition can counter the drawbacks of traditional BSF.

  9. The 5-Year Outlook on Science and Technology 1981. Source Materials Volume 2.

    Science.gov (United States)

    National Science Foundation, Washington, DC.

    This is the second of two volumes of source documents commissioned by the National Science Foundation in preparing the second 5-Year Outlook on Science and Technology for transmission to the Congress. This volume consists of the views of individuals selected by the Committee on Science, Engineering and Public Policy of the American Association for…

  10. TECHNOLOGY EVALUATION FOR CONDITIONING OF HANFORD TANK WASTE USING SOLIDS SEGREGATION AND SIZE REDUCTION

    Energy Technology Data Exchange (ETDEWEB)

    Restivo, M.; Stone, M.; Herman, D.; Lambert, D.; Duignan, M.; SMITH, G.; WELLS, B.; LUMETTA, G.; ENDRELIN, C.; ADKINS, H.

    2014-04-15

    The Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL) team performed a literature search on current and proposed technologies for solids segregation and size reduction of particles in the slurry feed from the Hanford Tank Farm (HTF). The team also investigated technology research performed on waste tank slurries, both real and simulated, and reviewed academic theory applicable to solids segregation and size reduction. This review included text book applications and theory, commercial applications suitable for a nuclear environment, research of commercial technologies suitable for a nuclear environment, and those technologies installed in a nuclear environment, including technologies implemented at Department of Energy (DOE) facilities. Information on each technology is provided in this report along with the advantages and disadvantages of the technologies for this application.

  11. Load Reduction, Demand Response and Energy Efficient Technologies and Strategies

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, Paul A.; Parker, Graham B.; Hatley, Darrel D.

    2008-11-19

    The Department of Energy’s (DOE’s) Pacific Northwest National Laboratory (PNNL) was tasked by the DOE Office of Electricity (OE) to recommend load reduction and grid integration strategies, and identify additional demand response (energy efficiency/conservation opportunities) and strategies at the Forest City Housing (FCH) redevelopment at Pearl Harbor and the Marine Corps Base Hawaii (MCBH) at Kaneohe Bay. The goal was to provide FCH staff a path forward to manage their electricity load and thus reduce costs at these FCH family housing developments. The initial focus of the work was at the MCBH given the MCBH has a demand-ratchet tariff, relatively high demand (~18 MW) and a commensurate high blended electricity rate (26 cents/kWh). The peak demand for MCBH occurs in July-August. And, on average, family housing at MCBH contributes ~36% to the MCBH total energy consumption. Thus, a significant load reduction in family housing can have a considerable impact on the overall site load. Based on a site visit to the MCBH and meetings with MCBH installation, FCH, and Hawaiian Electric Company (HECO) staff, recommended actions (including a "smart grid" recommendation) that can be undertaken by FCH to manage and reduce peak-demand in family housing are made. Recommendations are also made to reduce overall energy consumption, and thus reduce demand in FCH family housing.

  12. Reduction of Milling Time by Using CAQ Technologies

    Directory of Open Access Journals (Sweden)

    Zaujec Rudolf

    2016-09-01

    Full Text Available The paper is focused on reducing machining time by using 3D optical scanner of ATOS Triplescan II. Workpiece was a forging die, which was renovated by hard facing. The contribution deals with comparing the CAM simulation of roughing process according to the STL model imported from ATOS, and simulation without thus-defined workpiece. The results indicate a significant improvement of machining time based on CAQ technology and usage of the ATOS device for measuring the errors of weld deposit.

  13. Human choice and climate change. Volume 2: Resources and technology

    Energy Technology Data Exchange (ETDEWEB)

    Rayner, S.; Malone, E.L.

    1997-12-31

    Foreward: Preface; Introduction; The natural science of global climate change; Land and water use; Coastal zones and oceans; Energy and industry; Energy and social systems; Technological change; and Sponsoring organizations, International Advisory Board, and project participants.

  14. TECHNOLOGY EVALUATION REPORT: RETECH'S PLASMA CENTRIFUGAL FURNACE - VOLUME I

    Science.gov (United States)

    A demonstration of the Retech, Inc. Plasma Centrifugal Furnace (PCF) was conducted under the Superfund Innovative Technology Evaluation (SITE) Program at the Department of Energy's (DOE's) Component Development and Integration Facility in Butte, Montana. The furnace uses heat gen...

  15. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 6

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    QuEST is a publication of the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). This issue contains brief articles on: Risk Identification and Mitigation, Material Management and Substitution Efforts--Hexavalent Chrome-free Coatings and Low volatile organic compounds (VOCs) Coatings, Lead-Free Electronics, Corn-Based Depainting Media; Alternative Energy Efforts Hydrogen Sensors and Solar Air Conditioning. Other TEERM Efforts include: Energy and Water Management and Remediation Technology Collaboration.

  16. Aircraft gas turbine low-power emissions reduction technology program

    Science.gov (United States)

    Dodds, W. J.; Gleason, C. C.; Bahr, D. W.

    1978-01-01

    Advanced aircraft turbine engine combustor technology was used to reduce low-power emissions of carbon monoxide and unburned hydrocarbons to levels significantly lower than those which were achieved with current technology. Three combustor design concepts, which were designated as the hot-wall liner concept, the recuperative-cooled liner concept, and the catalyst converter concept, were evaluated in a series of CF6-50 engine size 40 degree-sector combustor rig tests. Twenty-one configurations were tested at operating conditions spanning the design condition which was an inlet temperature and pressure of 422 K and 304 kPa, a reference velocity of 23 m/s and a fuel-air-ration of 10.5 g/kg. At the design condition typical of aircraft turbine engine ground idle operation, the best configurations of all three concepts met the stringent emission goals which were 10, 1, and 4 g/kg for CO, HC, and Nox, respectively.

  17. Medication error reduction and the use of PDA technology.

    Science.gov (United States)

    Greenfield, Sue

    2007-03-01

    The purpose of this study was to determine whether nursing medication errors could be reduced and nursing care provided more efficiently using personal digital assistant (PDA) technology. The sample for this study consisted of junior and senior undergraduate baccalaureate nursing students. By self-selection of owning a PDA or not, students were placed in the PDA (experimental) group or the textbook (control) group, provided with a case study to read, and asked to answer six questions (i.e., three medication administration calculations and three clinical decisions based on medication administration). The analysis of collected data, calculated using a t test, revealed that the PDA group answered the six questions with greater accuracy and speed than did the textbook group.

  18. Hybrid Propulsion Technology Program, phase 1. Volume 1: Executive summary

    Science.gov (United States)

    1989-01-01

    The study program was contracted to evaluate concepts of hybrid propulsion, select the most optimum, and prepare a conceptual design package. Further, this study required preparation of a technology definition package to identify hybrid propulsion enabling technologies and planning to acquire that technology in Phase 2 and demonstrate that technology in Phase 3. Researchers evaluated two design philosophies for Hybrid Rocket Booster (HRB) selection. The first is an ASRM modified hybrid wherein as many components/designs as possible were used from the present Advanced Solid Rocket Motor (ASRM) design. The second was an entirely new hybrid optimized booster using ASRM criteria as a point of departure, i.e., diameter, thrust time curve, launch facilities, and external tank attach points. Researchers selected the new design based on the logic of optimizing a hybrid booster to provide NASA with a next generation vehicle in lieu of an interim advancement over the ASRM. The enabling technologies for hybrid propulsion are applicable to either and vehicle design may be selected at a downstream point (Phase 3) at NASA's discretion. The completion of these studies resulted in ranking the various concepts of boosters from the RSRM to a turbopump fed (TF) hybrid. The scoring resulting from the Figure of Merit (FOM) scoring system clearly shows a natural growth path where the turbopump fed solid liquid staged combustion hybrid provides maximized payload and the highest safety, reliability, and low life cycle costing.

  19. On Reduction Technology of Mn-ore%锰矿还原技术

    Institute of Scientific and Technical Information of China (English)

    杨娟; 胡波

    2011-01-01

    In order to broaden sources of raw materials for electric manganese metal(EM M),it is necessary to develop reduction technology of manganese oxide.In this paper, reduction principle is brief presented, and several different reduction technologies of Mn oxide are summarized.%为拓宽电解金属锰生产原料来源,有必要开发氧化锰矿还原技术.本文简要介绍氧化锰矿还原原理,并综述几种还原工艺.

  20. Effect of volume loading on the Frank-Starling relation during reductions in central blood volume in heat-stressed humans.

    Science.gov (United States)

    Bundgaard-Nielsen, M; Wilson, T E; Seifert, T; Secher, N H; Crandall, C G

    2010-09-01

    During reductions in central blood volume while heat stressed, a greater decrease in stroke volume (SV) for a similar decrease in ventricular filling pressure, compared to normothermia, suggests that the heart is operating on a steeper portion of a Frank-Starling curve. If so, volume loading of heat-stressed individuals would shift the operating point to a flatter portion of the heat stress Frank-Starling curve thereby attenuating the reduction in SV during subsequent decreases in central blood volume. To investigate this hypothesis, right heart catheterization was performed in eight males from whom pulmonary capillary wedge pressure (PCWP), central venous pressure and SV (via thermodilution) were obtained while central blood volume was reduced via lower-body negative pressure (LBNP) during normothermia, whole-body heating (increase in blood temperature 1 degrees C), and during whole-body heating after intravascular volume expansion. Volume expansion was accomplished by administration of a combination of a synthetic colloid (HES 130/0.4, Voluven) and saline. Before LBNP, SV was not affected by heating (122 +/- 30 ml; mean +/- s.d.) compared to normothermia (110 +/- 20 ml; P = 0.06). However, subsequent volume loading increased SV to 143 +/- 29 ml (P = 0.003). LBNP provoked a larger decrease in SV relative to the decrease in PCWP during heating (8.6 +/- 1.9 ml mmHg(1)) compared to normothermia (4.5 +/- 3.0 ml mmHg(1), P = 0.02). After volume loading while heat stressed, the reduction in the SV to PCWP ratio during LBNP was comparable to that observed during normothermia (4.8 +/- 2.3 ml mmHg(1); P = 0.78). These data support the hypothesis that a Frank-Starling mechanism contributes to compromised blood pressure control during simulated haemorrhage in heat-stressed individuals, and extend those findings by showing that volume infusion corrects this deficit by shifting the operating point to a flatter portion of the heat stress Frank-Starling curve.

  1. Second annual clean coal technology conference: Proceedings. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-09

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately.

  2. Developments in management and technology of waste reduction and disposal.

    Science.gov (United States)

    Rushbrook, Philip

    2006-09-01

    Scandals and public dangers from the mismanagement and poor disposal of hazardous wastes during the 1960s and 1970s awakened the modern-day environmental movement. Influential publications such as "Silent Spring" and high-profile disposal failures, for example, Love Canal and Lekkerkerk, focused attention on the use of chemicals in everyday life and the potential dangers from inappropriate disposal. This attention has not abated and developments, invariably increasing expectations and tightening requirements, continue to be implemented. Waste, as a surrogate for environmental improvement, is a topic where elected representatives and administrations continually want to do more. This article will chart the recent changes in hazardous waste management emanating from the European Union legislation, now being implemented in Member States across the continent. These developments widen the range of discarded materials regarded as "hazardous," prohibit the use of specific chemicals, prohibit the use of waste management options, shift the emphasis from risk-based treatment and disposal to inclusive lists, and incorporate waste producers into more stringent regulatory regimes. The impact of the changes is also intended to provide renewed impetus for waste reduction. Under an environmental control system where only certainty is tolerated, the opportunities for innovation within the industry and the waste treatment and disposal sector will be explored. A challenging analysis will be offered on the impact of this regulation-led approach to the nature and sustainability of hazardous waste treatment and disposal in the future.

  3. ICSOFT 2006 : First International Conference on Software and Data Technologies, Volume 1

    NARCIS (Netherlands)

    Filipe, Joaquim; Shishkov, Boris; Helfert, Markus

    2006-01-01

    This volume contains the proceedings of the first International Conference on Software and Data Technologies (ICSOFT 2006), organized by the Institute for Systems and Technologies of Information, Communication and Control (INSTICC) in cooperation with the Object Management Group (OMG), sponsored by

  4. Oxygen as a stimulant: Dramatic reduction of sewage sludge volumes; Sauerstoff als Stimulanz: Der Klaerschlammanfall laesst sich dramatisch verringern

    Energy Technology Data Exchange (ETDEWEB)

    Croissant, B. [OWAS Odenwaelder Wasser- und Abwasser-Service GmbH, Erbach (Germany); Stark, O. [Stark-Consult, Duesseldorf (Germany)

    2002-10-01

    Sludge volumes can be reduced significantly by optimising the biological processes in a sewage plant. During a trial period of eight months, a 45 percent reduction was achieved on average. Secondary effects were improved carbon and nitrate reduction. [German] Durch eine Optmierung der biologischen Prozesse in der Klaeranlage ist moeglich, den Ueberschussschlammanfall deutlich zu senken. Ueber einen Zeitraum von acht Monaten konnte der mittlere Schlammanfall um 45 Prozent reduziert werden. Sekundaere Effekte des Verfahrens waren eine verbesserte Kohlenstoffablauf- und Nitratablaufkonzentration. (orig.)

  5. Bronchoscopic lung volume reduction by endobronchial valve in advanced emphysema: the first Asian report

    Directory of Open Access Journals (Sweden)

    Park TS

    2015-07-01

    Full Text Available Tai Sun Park,1 Yoonki Hong,2 Jae Seung Lee,1 Sang Young Oh,3 Sang Min Lee,3 Namkug Kim,3 Joon Beom Seo,3 Yeon-Mok Oh,1 Sang-Do Lee,1 Sei Won Lee1 1Department of Pulmonary and Critical Care Medicine and Clinical Research Center for Chronic Obstructive Airway Diseases, Asan Medical Center, University of Ulsan College of Medicine, Seoul, Korea; 2Department of Internal Medicine, College of Medicine, Kangwon National University, Chuncheon, Korea; 3Department of Radiology and Research Institute of Radiology, Asan Medical Center, University of Ulsan College of Medicine, Seoul, Korea Purpose: Endobronchial valve (EBV therapy is increasingly being seen as a therapeutic option for advanced emphysema, but its clinical utility in Asian populations, who may have different phenotypes to other ethnic populations, has not been assessed.Patients and methods: This prospective open-label single-arm clinical trial examined the clinical efficacy and the safety of EBV in 43 consecutive patients (mean age 68.4±7.5, forced expiratory volume in 1 second [FEV1] 24.5%±10.7% predicted, residual volume 208.7%±47.9% predicted with severe emphysema with complete fissure and no collateral ventilation in a tertiary referral hospital in Korea.Results: Compared to baseline, the patients exhibited significant improvements 6 months after EBV therapy in terms of FEV1 (from 0.68±0.26 L to 0.92±0.40 L; P<0.001, 6-minute walk distance (from 233.5±114.8 m to 299.6±87.5 m; P=0.012, modified Medical Research Council dyspnea scale (from 3.7±0.6 to 2.4±1.2; P<0.001, and St George’s Respiratory Questionnaire (from 65.59±13.07 to 53.76±11.40; P=0.028. Nine patients (20.9% had a tuberculosis scar, but these scars did not affect target lobe volume reduction or pneumothorax frequency. Thirteen patients had adverse events, ten (23.3% developed pneumothorax, which included one death due to tension pneumothorax.Conclusion: EBV therapy was as effective and safe in Korean

  6. ASEAN--USAID Buildings Energy Conservation Project final report. Volume 2, Technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.

    1992-06-01

    This volume reports on research in the area of energy conservation technology applied to commercial buildings in the Association of Southeast Asian Nations (ASEAN) region. Unlike Volume I of this series, this volume is a compilation of original technical papers prepared by different authors in the project. In this regard, this volume is much like a technical journal. The papers that follow report on research conducted by both US and ASEAN researchers. The authors representing Indonesia, Malaysia, Philippines, and Thailand, come from a range of positions in the energy arena, including government energy agencies, electric utilities, and universities. As such, they account for a wide range of perspectives on energy problems and the role that technology can play in solving them. This volume is about using energy more intelligently. In some cases, the effort is towards the use of more advanced technologies, such as low-emittance coatings on window glass, thermal energy storage, or cogeneration. In others, the emphasis is towards reclaiming traditional techniques for rendering energy services, but in new contexts such as lighting office buildings with natural light, or cooling buildings of all types with natural ventilation. Used in its broadest sense, the term ``technology`` encompasses all of the topics addressed in this volume. Along with the more customary associations of technology, such as advanced materials and equipment and the analysis of their performance, this volume treats design concepts and techniques, analysis of ``secondary`` impacts from applying technologies (i.e., unintended impacts, or impacts on parties not directly involved in the purchase and use of the technology), and the collection of primary data used for conducting technical analyses.

  7. Emphysema. Imaging for endoscopic lung volume reduction; Lungenemphysem. Bildgebung bei endoskopischer Lungenvolumenreduktion

    Energy Technology Data Exchange (ETDEWEB)

    Storbeck, B. [LungenClinic Grosshansdorf (Germany). Dept. of Radiology; Schroeder, T.H. [Amalie Sieveking-Hospital, Diagnostic and Interventional Radiology, Hamburg (Germany); Oldigs, M.; Rabe, K.F. [LungenClinic Grosshansdorf (Germany). Dept. of Pulmonology; Weber, C. [Amalie Sieveking-Hospital, Diagnostic and Interventional Radiology, Hamburg (Germany); University Medical Center Hamburg-Eppendorf (Germany). Diagnostic and Interventional Radiology

    2015-07-15

    Chronic obstructive pulmonary disease (COPD) is characterized by two entities, the more airway-predominant type (''bronchitis'') on the one hand, and emphysema-predominant type on the other. Imaging via high-resolution computed tomography plays an important role in phenotyping COPD. For patients with advanced lung emphysema, new endoscopic lung volume reduction therapies (ELVR) have been developed. Proper selection of suitable patients requires thin-section reconstruction of volumetric CT image data sets also in coronal and sagittal orientation are required. In the current manuscript we will describe emphysema subtypes (centrilobular, paraseptal, panlobular), options for quantifying emphysema and this importance of regional distribution (homogeneous or heterogeneous, target area) as this is crucial for patient selection. Analysis of the interlobular fissures is obligatory despite the lack of standardization, as incomplete fissures indicate collateral ventilation (CV) via parenchymal bridges, which is an important criterion in choosing endoscopic methods of LVR. Every radiologist should be familiar with modern LVR therapies such as valves and coils, and furthermore should know what a lung doctor expects from radiologic evaluation (before and after ELVR). Finally we present a checklist as a quick reference for all steps concerning imaging for ELVR.

  8. Effects of radiation dose reduction in Volume Perfusion CT imaging of acute ischemic stroke

    Energy Technology Data Exchange (ETDEWEB)

    Othman, Ahmed E. [RWTH Aachen University, Department of Diagnostic and Interventional Neuroradiology, Aachen (Germany); Eberhard Karls University Tuebingen, University Hospital Tuebingen, Department for Diagnostic and Interventional Radiology, Tuebingen (Germany); Brockmann, Carolin; Afat, Saif; Pjontek, Rastislav; Nikobashman, Omid; Brockmann, Marc A.; Wiesmann, Martin [RWTH Aachen University, Department of Diagnostic and Interventional Neuroradiology, Aachen (Germany); Yang, Zepa; Kim, Changwon [Seoul National University, Department of Transdisciplinary Studies, Graduate School of Convergence Science and Technology, Suwon (Korea, Republic of); Seoul National University College of Medicine, Department of Radiology, Seoul (Korea, Republic of); Kim, Jong Hyo [Seoul National University, Department of Transdisciplinary Studies, Graduate School of Convergence Science and Technology, Suwon (Korea, Republic of); Seoul National University College of Medicine, Department of Radiology, Seoul (Korea, Republic of); Center for Medical-IT Convergence Technology Research, Advanced Institute of Convergence Technology, Suwon (Korea, Republic of)

    2015-12-15

    To examine the influence of radiation dose reduction on image quality and sensitivity of Volume Perfusion CT (VPCT) maps regarding the detection of ischemic brain lesions. VPCT data of 20 patients with suspected ischemic stroke acquired at 80 kV and 180 mAs were included. Using realistic reduced-dose simulation, low-dose VPCT datasets with 144 mAs, 108 mAs, 72 mAs and 36 mAs (80 %, 60 %, 40 % and 20 % of the original levels) were generated, resulting in a total of 100 datasets. Perfusion maps were created and signal-to-noise-ratio (SNR) measurements were performed. Qualitative analyses were conducted by two blinded readers, who also assessed the presence/absence of ischemic lesions and scored CBV and CBF maps using a modified ASPECTS-score. SNR of all low-dose datasets were significantly lower than those of the original datasets (p <.05). All datasets down to 72 mAs (40 %) yielded sufficient image quality and high sensitivity with excellent inter-observer-agreements, whereas 36 mAs datasets (20 %) yielded poor image quality in 15 % of the cases with lower sensitivity and inter-observer-agreements. Low-dose VPCT using decreased tube currents down to 72 mAs (40 % of original radiation dose) produces sufficient perfusion maps for the detection of ischemic brain lesions. (orig.)

  9. Reduction of Pulmonary Function After Surgical Lung Resections of Different Volume

    Science.gov (United States)

    Cukic, Vesna

    2014-01-01

    Introduction: In recent years an increasing number of lung resections are being done because of the rising prevalence of lung cancer that occurs mainly in patients with limited lung function, what is caused with common etiologic factor - smoking cigarettes. Objective: To determine how big the loss of lung function is after surgical resection of lung of different range. Methods: The study was done on 58 patients operated at the Clinic for thoracic surgery KCU Sarajevo, previously treated at the Clinic for pulmonary diseases “Podhrastovi” in the period from 01.06.2012. to 01.06.2014. The following resections were done: pulmectomy (left, right), lobectomy (upper, lower: left and right). The values of postoperative pulmonary function were compared with preoperative ones. As a parameter of lung function we used FEV1 (forced expiratory volume in one second), and changes in FEV1 are expressed in liters and in percentage of the recorded preoperative and normal values of FEV1. Measurements of lung function were performed seven days before and 2 months after surgery. Results: Postoperative FEV1 was decreased compared to preoperative values. After pulmectomy the maximum reduction of FEV1 was 44%, and after lobectomy it was 22% of the preoperative values. Conclusion: Patients with airway obstruction are limited in their daily life before the surgery, and an additional loss of lung tissue after resection contributes to their inability. Potential benefits of lung resection surgery should be balanced in relation to postoperative morbidity and mortality. PMID:25568542

  10. Ion Recognition Approach to Volume Reduction of Alkaline Tank Waste by Separation of Sodium Salts

    Energy Technology Data Exchange (ETDEWEB)

    Moyer, Bruce A.; Bonnesen, Peter V.; Custelcean, Radu; Delmau, Laetitia H.; Engle, Nancy L.; Kang, Hyun-Ah; Keever, Tamara J.; Marchand, Alan P.; Gadthula, Srinivas; Gore, Vinayak K.; Huang, Zilin; Sivappa, Rasapalli; Tirunahari, Pavan K.; Levitskaia, Tatiana G.; Lumetta, Gregg J.

    2005-09-26

    The purpose of this research involving collaboration between Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) is to explore new approaches to the separation of sodium hydroxide, sodium nitrate, and other sodium salts from high-level alkaline tank waste. The principal potential benefit is a major reduction in disposed waste volume, obviating the building of expensive new waste tanks and reducing the costs of vitrification. Principles of ion recognition are being researched toward discovery of liquid-liquid extraction systems that selectively separate sodium hydroxide and sodium nitrate from other waste components. The successful concept of pseudo hydroxide extraction using fluorinated alcohols and phenols is being developed at ORNL and PNNL toward a greater understanding of the controlling equilibria, role of solvation, and of synergistic effects involving crown ethers. Synthesis efforts are being directed toward enhanced sodium binding by crown ethers, both neutral and proton-ionizable. Studies with real tank waste at PNNL will provide feedback toward solvent compositions that have promising properties.

  11. Evaluation of patients undergoing lung volume reduction surgery: Ancillary information available from computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Cleverley, Joanne R.; Desai, Sujal R.; Wells, Athol U.; Koyama, Hiroshi; Eastick, Sian; Schmidt, Maria A.; Charrier, Clare L.; Gatehouse, Peter D.; Goldstraw, Peter; Pepper, John R.; Geddes, Duncan M.; Hansell, David M

    2000-01-01

    AIM: A number of imaging techniques have been used for the pre-operative assessment of patients for lung volume reduction surgery (LVRS). We evaluated whether data currently acquired from perfusion scintigrams and cine MR of the diaphragm are obtainable from high resolution CT (HRCT) of the thorax. MATERIALS AND METHODS: Thirty patients taking part in a randomized controlled trial of LVRS against maximal medical therapy were evaluated. HRCT examinations (n= 30) were scored for (i) the extent and distribution of emphysema; (ii) the extent of normal pulmonary vasculature; and (iii) diaphragmatic contour, apparent defects and herniation. On scintigraphy, (n28), perfusion of the lower thirds of both lungs, as a proportion of total lung perfusion (LZ/T{sub PERF}), was expressed as a percentage of predicted values (derived from 10 normal control subjects). On cine MR (n= 25) hemidiaphragmatic excursion and coordination were recorded. RESULTS: Extensive emphysema was present on HRCT (60% {+-} 13.2%). There was strong correlation between the extent of normal pulmonary vasculature on HRCT and on perfusion scanning (r{sub s}= 0.85, P< 0.00005). Hemidiaphragmatic incoordination on MR was weakly associated with hemidiaphragmatic eventration on HRCT (P0.04). CONCLUSION: The strong correlation between lung perfusion assessed by HRCT and lung perfusion on scintigraphy suggests that perfusion scintigraphy is superfluous in the pre-operative evaluation of patients with emphysema for LVRS. Cleverley, J.R. (2000)

  12. [Effect of lung volume reduction surgery (LVRS) on nutritional status in patients with COPD].

    Science.gov (United States)

    Kobayashi, Atsushi; Yoshikawa, Masanori; Kushibe, Keiji; Takenaka, Hideaki; Hukuoka, Atsuhiko; Tamaki, Shinji; Kimura, Hiroshi

    2003-12-01

    The beneficial effects of lung volume reduction surgery (LVRS) on patients with severe chronic obstructive pulmonary disease (COPD) on pulmonary function and exercise performance has been established. However, the impact on nutritional status and prognosis has not been demonstrated. In the present study, we investigated the changes in nutritional status in COPD patients undergoing bilateral thoracoscopic LVRS and also analyzed the relationship between nutritional status and postoperative complications and prognosis. After LVRS, body weight, fat-free mass (FFM) and caloric intake were significantly increased. Increase in FFM correlated significantly with improvement in exercise performance. In underweight patients before LVRS, the incidence of post-operative complications was significantly higher than in normal-weight patients, and a patient who was moderately-to-severely underweight (% ideal body weight nutritional status after LVRS contributes to improvement in exercise performance, and that preoperative nutritional status has a significant impact on postoperative morbidity and mortality. From our data, we concluded that preoperative nutritional assessment is an important part of the preoperative evaluation of LVRS, and that LVRS provides nutritional benefits for underweight patients with severe COPD.

  13. Xenobiotic metabolizing enzyme gene polymorphisms predict response to lung volume reduction surgery

    Directory of Open Access Journals (Sweden)

    DeMeo Dawn L

    2007-08-01

    Full Text Available Abstract Background In the National Emphysema Treatment Trial (NETT, marked variability in response to lung volume reduction surgery (LVRS was observed. We sought to identify genetic differences which may explain some of this variability. Methods In 203 subjects from the NETT Genetics Ancillary Study, four outcome measures were used to define response to LVRS at six months: modified BODE index, post-bronchodilator FEV1, maximum work achieved on a cardiopulmonary exercise test, and University of California, San Diego shortness of breath questionnaire. Sixty-four single nucleotide polymorphisms (SNPs were genotyped in five genes previously shown to be associated with chronic obstructive pulmonary disease susceptibility, exercise capacity, or emphysema distribution. Results A SNP upstream from glutathione S-transferase pi (GSTP1; p = 0.003 and a coding SNP in microsomal epoxide hydrolase (EPHX1; p = 0.02 were each associated with change in BODE score. These effects appeared to be strongest in patients in the non-upper lobe predominant, low exercise subgroup. A promoter SNP in EPHX1 was associated with change in BODE score (p = 0.008, with the strongest effects in patients with upper lobe predominant emphysema and low exercise capacity. One additional SNP in GSTP1 and three additional SNPs in EPHX1 were associated (p Conclusion Genetic variants in GSTP1 and EPHX1, two genes encoding xenobiotic metabolizing enzymes, were predictive of response to LVRS. These polymorphisms may identify patients most likely to benefit from LVRS.

  14. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    Volume IV of the ISTUM documentation gives information on the individual technology specifications, but relates closely with Chapter II of Volume I. The emphasis in that chapter is on providing an overview of where each technology fits into the general-model logic. Volume IV presents the actual cost structure and specification of every technology modeled in ISTUM. The first chapter presents a general overview of the ISTUM technology data base. It includes an explanation of the data base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters are devoted to documenting the specific-technology cost specifications. Technologies included are: conventional technologies (boiler and non-boiler conventional technologies); fossil-energy technologies (atmospheric fluidized bed combustion, low Btu coal and medium Btu coal gasification); cogeneration (steam, machine drive, and electrolytic service sectors); and solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies), and conservation technologies.

  15. Hybrid propulsion technology program. Volume 1: Conceptional design package

    Science.gov (United States)

    Jensen, Gordon E.; Holzman, Allen L.; Leisch, Steven O.; Keilbach, Joseph; Parsley, Randy; Humphrey, John

    1989-01-01

    A concept design study was performed to configure two sizes of hybrid boosters; one which duplicates the advanced shuttle rocket motor vacuum thrust time curve and a smaller, quarter thrust level booster. Two sizes of hybrid boosters were configured for either pump-fed or pressure-fed oxygen feed systems. Performance analyses show improved payload capability relative to a solid propellant booster. Size optimization and fuel safety considerations resulted in a 4.57 m (180 inch) diameter large booster with an inert hydrocarbon fuel. The preferred diameter for the quarter thrust level booster is 2.53 m (96 inches). As part of the design study critical technology issues were identified and a technology acquisition and demonstration plan was formulated.

  16. Conventional engine technology. Volume 3: Comparisons and future potential

    Science.gov (United States)

    Dowdy, M. W.

    1981-01-01

    The status of five conventional automobile engine technologies was assessed and the future potential for increasing fuel economy and reducing exhaust emission was discussed, using the 1980 EPA California emisions standards as a comparative basis. By 1986, the fuel economy of a uniform charge Otto engine with a three-way catalyst is expected to increase 10%, while vehicles with lean burn (fast burn) engines should show a 20% fuel economy increase. Although vehicles with stratified-charge engines and rotary engines are expected to improve, their fuel economy will remain inferior to the other engine types. When adequate NO emissions control methods are implemented to meet the EPA requirements, vehicles with prechamber diesel engines are expected to yield a fuel economy advantage of about 15%. While successful introduction of direct injection diesel engine technology will provide a fuel savings of 30 to 35%, the planned regulation of exhaust particulates could seriously hinder this technology, because it is expected that only the smallest diesel engine vehicles could meet the proposed particulate requirements.

  17. Energy Saving Melting and Revert Reduction Technology (Energy SMARRT): Manufacturing Advanced Engineered Components Using Lost Foam Casting Technology

    Energy Technology Data Exchange (ETDEWEB)

    Littleton, Harry; Griffin, John

    2011-07-31

    This project was a subtask of Energy Saving Melting and Revert Reduction Technology (Energy SMARRT) Program. Through this project, technologies, such as computer modeling, pattern quality control, casting quality control and marketing tools, were developed to advance the Lost Foam Casting process application and provide greater energy savings. These technologies have improved (1) production efficiency, (2) mechanical properties, and (3) marketability of lost foam castings. All three reduce energy consumption in the metals casting industry. This report summarizes the work done on all tasks in the period of January 1, 2004 through June 30, 2011. Current (2011) annual energy saving estimates based on commercial introduction in 2011 and a market penetration of 97% by 2020 is 5.02 trillion BTU's/year and 6.46 trillion BTU's/year with 100% market penetration by 2023. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2020 is 0.03 Million Metric Tons of Carbon Equivalent (MM TCE).

  18. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

  19. Effects of tongue volume reduction on craniofacial growth: A longitudinal study on orofacial skeletons and dental arches.

    Science.gov (United States)

    Liu, Zi-Jun; Shcherbatyy, Volodymyr; Gu, Gaoman; Perkins, Jonathan A

    2008-10-01

    The interaction between tongue size/volume and craniofacial skeletal growth is essential for understanding the mechanism of specific types of malocclusion and objectively measuring outcomes of various surgical and/or orthodontic treatments. Currently available information on this interaction is limited. This study was designed to examine how tongue body volume reduction affects craniofacial skeleton and dental arch formation during the rapid growth period in five 12-week-old Yucatan minipig sibling pairs. One of each pair received a standardized reduction glossectomy to reduce tongue volume by 15-17% (reduction group), and the other had the reduction glossectomy incisions without tissue removal (sham group). Before surgery, five stainless steel screws were implanted into standardized craniofacial skeletal locations. A series of cephalograms, lateral and axial, were obtained longitudinally at 1 week preoperative, and 2 and 4 weeks postoperative. These images were traced using superimposition, and linear and angular variables were measured digitally. Upon euthanasia, direct osteometric measurements were obtained from harvested skulls. Five en-bloc bone pieces were further cut for bone mineral examination by dual photon/energy X-ray absorptiometry (DEXA). The results indicate that: (1) while daily food consumption and weekly body weight were not significantly affected, tongue volume reduction showed an overall negative effect on the linear expansion of craniofacial skeletons; (2) premaxilla and mandibular symphysis lengths, and anterior dental arch width were significantly less in reduction than sham animals at 2 and/or 4 weeks after the surgery; (3) both premaxilla/maxilla and mandible bone mineral density and content were lower in reduction than sham animals, significantly lower in anterior mandible; (4) craniofacial skeletal and dental arch size were significantly smaller in reduction than sham animals, being most significant in the mandibular anterior length and

  20. QuEST: Qualifying Environmentally Sustainable Technologies, Volume 5

    Science.gov (United States)

    Lewis, Pattie

    2010-01-01

    This edition of the QuEST newsletter contains brief articles that discuss the NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) program, and the importance of collaboration, efforts in materials management and substitution for coatings for launch structures, Low volatile organic compound (VOC) Coatings Field Testing, Non-Chrome Coating Systems, Life Cycle Corrosion Testing, Lead-Free Electronics Testing and Corn Based Depainting and efforts in Pollution Control in the area of Hypergolic Propellant Destruction Evaluation, efforts in development of alternative energy in particular Hydrogen Sensors, Energy and Water Management, and efforts in remediation in the removal of Polychlorinated Biphenyl (PCB) contamination

  1. Cogeneration technology alternatives study. Volume 2: Industrial process characteristics

    Science.gov (United States)

    1980-01-01

    Information and data for 26 industrial processes are presented. The following information is given for each process: (1) a description of the process including the annual energy consumption and product production and plant capacity; (2) the energy requirements of the process for each unit of production and the detailed data concerning electrical energy requirements and also hot water, steam, and direct fired thermal requirements; (3) anticipated trends affecting energy requirements with new process or production technologies; and (4) representative plant data including capacity and projected requirements through the year 2000.

  2. Soft Computing in Information Communication Technology Volume 2

    CERN Document Server

    2012-01-01

    This book is a collection of the accepted papers concerning soft computing in information communication technology. The resultant dissemination of the latest research results, and the exchanges of views concerning the future research directions to be taken in this field makes the work of immense value to all those having an interest in the topics covered. The present book represents a cooperative effort to seek out the best strategies for effecting improvements in the quality and the reliability of Fuzzy Logic, Machine Learning, Cryptography, Pattern Recognition, Bioinformatics, Biomedical Engineering, Advancements in ICT.

  3. Impact of endoscopic lung volume reduction on right ventricular myocardial function.

    Directory of Open Access Journals (Sweden)

    Carmen Pizarro

    Full Text Available Endoscopic lung volume reduction (ELVR provides a minimally invasive therapy for patients with severe lung emphysema. As its impact on right ventricular (RtV function is undefined, we examined the extent of RtV functional changes following ELVR, as assessed by use of speckle tracking-based RtV deformation analysis.We enrolled 32 patients with severe emphysematous COPD scheduled for bronchoscopic LVR using endobronchial valves (Zephyr, PulmonX, Inc., comprising 16 matched clinical responders and 16 non-responders. Echocardiography was conducted one day prior to ELVR and at an eight-week postprocedural interval.Patients were predominantly of late middle-age (65.8 ± 8.7 yrs, male (62.5% and presented advanced COPD emphysema (means FEV1 and RV: 32.6% and 239.1% of predicted, respectively. After ELVR, RtV apical longitudinal strain improved significantly in the total study cohort (-7.96 ± 7.02% vs. -13.35 ± 11.48%, p = 0.04, whereas there were no significant changes in other parameters of RtV function such as RtV global longitudinal strain, TAPSE or pulmonary arterial systolic pressure. In responding patients, 6MWT-improvement correlated with a decrease in NT-proBNP (Pearson´s r: -0.53, p = 0.03. However, clinical non-responders did not exhibit any RtV functional improvement.ELVR beneficially impacts RtV functional parameters. Speckle tracking-based RtV apical longitudinal strain analysis allows early determination of RtV contractile gain and identification of clinical responsiveness.

  4. SEASONAL CHANGES IN THE REDUCTION OF BIOGENIC COMPOUNDS IN WASTEWATER TREATMENT PLANTS BASED ON HYDROPONIC TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Aleksandra Bawiec

    2016-04-01

    Full Text Available The study presents the results of the treatment of domestic and industrial wastewater with respect to the reduction of nitrogen and phosphorus compounds. The analysis encompasses the results of physical and chemical tests of effluents from two facilities based on hydroponic technology: wastewater treatment plants with hydroponic lagoons using the BIOPAX technology – Paczków, Poland and the Organica technology – Szarvas, Hungary. Monthly treatment effectiveness was determined basing on these analyses. The composition of wastewater flowing into the lagoon (after mechanical treatment and wastewater discharged to the collector in 2009–2011 was subject to physical and chemical analysis in both facilities. The effluent quality was determined basing on the concentration of total phosphorus, total nitrogen and ammonium nitrogen. Mean annual results of the operation of both objects were high. For the wastewater treatment plant in Paczkow, operating in the BIOPAX technology, the effectiveness of treatment with respect to total nitrogen throughout the analysed period ranged from 76.9–84.4%. Total phosphorus was eliminated from wastewater with an effectiveness of 96.4–98.0%. Such high reduction level was caused by the application of additional precipitation process in the chambers of activated sludge reactor. The hydroponic plant in Szarvas (Organica technology was characterised by a high effectiveness of reduction with respect to ammonium nitrogen: 92.0–93.0%, while the reduction of total phosphorus fell into the range 49.3–55.3%.

  5. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

    Science.gov (United States)

    Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

    1980-01-01

    Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

  6. Survey of biomass gasification. Volume III. Current technology and research

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    This survey of biomass gasification was written to aid the Department of Energy and the Solar Energy Research Institute Biological and Chemical Conversion Branch in determining the areas of gasification that are ready for commercialization now and those areas in which further research and development will be most productive. Chapter 8 is a survey of gasifier types. Chapter 9 consists of a directory of current manufacturers of gasifiers and gasifier development programs. Chapter 10 is a sampling of current gasification R and D programs and their unique features. Chapter 11 compares air gasification for the conversion of existing gas/oil boiler systems to biomass feedstocks with the price of installing new biomass combustion equipment. Chapter 12 treats gas conditioning as a necessary adjunct to all but close-coupled gasifiers, in which the product is promptly burned. Chapter 13 evaluates, technically and economically, synthesis-gas processes for conversion to methanol, ammonia, gasoline, or methane. Chapter 14 compiles a number of comments that have been assembled from various members of the gasifier community as to possible roles of the government in accelerating the development of gasifier technology and commercialization. Chapter 15 includes recommendations for future gasification research and development.

  7. Assessment of control technology for stationary sources. Volume I: technical discussion. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    The purpose of this project was to develop a reference document for use by the Air Resources Board, local air pollution control districts, and the U.S. Environmental Protection Agency that describes technological options available for the control of emissions from stationary sources located in California. Control technologies were examined for 10 industry groups and six air pollutants. Volume I, Technical Discussion, includes an overall introduction to the project, descriptions of its major elements, background information for each industry group addressed, and the project bibliography. In Volume II, Control Technology Data Tables, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts, and application status are presented in tabular format. Also included is a code list that classifies the stationary sources examined by industry, process and emission source.

  8. Resonant Mode Reduction in Radiofrequency Volume Coils for Ultrahigh Field Magnetic Resonance Imaging

    Directory of Open Access Journals (Sweden)

    Xiaoliang Zhang

    2011-07-01

    Full Text Available In a multimodal volume coil, only one mode can generate homogeneous Radiofrequency (RF field for Magnetic Resonance Imaging. The existence of other modes may increase the volume coil design difficulties and potentially decreases coil performance. In this study, we introduce common-mode resonator technique to high and ultrahigh field volume coil designs to reduce the resonant mode while maintain the homogeneity of the RF field. To investigate the design method, the common-mode resonator was realized by using a microstrip line which was split along the central to become a pair of parallel transmission lines within which common-mode currents exist. Eight common-mode resonators were placed equidistantly along the circumference of a low loss dielectric cylinder to form a volume coil. Theoretical analysis and comparison between the 16-strut common-mode volume coil and a conventional 16-strut volume coil in terms of RF field homogeneity and efficiency was performed using Finite-Difference Time-Domain (FDTD method at 298.2 MHz. MR imaging experiments were performed by using a prototype of the common-mode volume coil on a whole body 7 Tesla scanner. FDTD simulation results showed the reduced number of resonant modes of the common-mode volume coil over the conventional volume coil, while the RF field homogeneity of the two type volume coils was kept at the same level. MR imaging of a water phantom and a kiwi fruit showing the feasibility of the proposed method for simplifying the volume coil design is also presented.

  9. Environmental control implications of generating electric power from coal. Technology status report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized-bed combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems. Volume II presents the detailed technology analyses complete with reference citations. This same material is given in condensed form in Volume I without references. A brief executive summary is also given in Volume I.

  10. Reduction of heart volume during neoadjuvant chemoradiation in patients with resectable esophageal cancer

    NARCIS (Netherlands)

    Haj Mohammad, Nadia; Kamphuis, Martijn; Hulshof, Maarten C C M; Lutkenhaus, Lotte J; Gisbertz, Suzanne S; Bergman, Jacques J G H M; de Bruin-Bon, H A C M Rianne; Geijsen, Elisabeth D; Bel, Arjan; Boekholdt, S Mathijs; van Laarhoven, Hanneke W M

    2015-01-01

    BACKGROUND AND PURPOSE: Neoadjuvant chemoradiation (nCRT) followed by surgery is considered curative intent treatment for patients with resectable esophageal cancer. The aim was to establish hemodynamic aspects of changes in heart volume and to explore whether changes in heart volume resulted in cli

  11. Emerging Communication Technologies (ECT) Phase 2 Report. Volume 1; Main Report

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Chiodini, Robert; Nelson, Richard A.; Huang, PoTien; Kruhm, David A.

    2003-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Second Generation Reusable Launch Vehicle (2nd Gen RLV), Orbital Space Plane, Advanced Range Technology Working Group (ARTWG) and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures. ECT was a continuation of the Range Information System Management (RISM) task started in 2002. RISM identified the three advance communication technologies investigated under ECT. These were Wireless Ethernet (Wi-Fi), Free Space Optics (FSO), and Ultra Wideband (UWB). Due to the report s size, it has been broken into three volumes: 1) Main Report 2) Appendices 3) UWB.

  12. Plasma-assisted combustion technology for NOx reduction in industrial burners.

    Science.gov (United States)

    Lee, Dae Hoon; Kim, Kwan-Tae; Kang, Hee Seok; Song, Young-Hoon; Park, Jae Eon

    2013-10-01

    Stronger regulations on nitrogen oxide (NOx) production have recently promoted the creation of a diverse array of technologies for NOx reduction, particularly within the combustion process, where reduction is least expensive. In this paper, we discuss a new combustion technology that can reduce NOx emissions within industrial burners to single-digit parts per million levels without employing exhaust gas recirculation or other NOx reduction mechanisms. This new technology uses a simple modification of commercial burners, such that they are able to perform plasma-assisted staged combustion without altering the outer configuration of the commercial reference burner. We embedded the first-stage combustor within the head of the commercial reference burner, where it operated as a reformer that could host a partial oxidation process, producing hydrogen-rich reformate or synthesis gas product. The resulting hydrogen-rich flow then ignited and stabilized the combustion flame apart from the burner rim. Ultimately, the enhanced mixing and removal of hot spots with a widened flame area acted as the main mechanisms of NOx reduction. Because this plasma burner acted as a low NOx burner and was able to reduce NOx by more than half compared to the commercial reference burner, this methodology offers important cost-effective possibilities for NOx reduction in industrial applications.

  13. Research on surveying technology applied for DTM modelling and volume computation in open pit mines

    Directory of Open Access Journals (Sweden)

    Jaroslaw Wajs

    2016-01-01

    Full Text Available The spatial information systems of mining company can be used for monitoring of mining activity, excavation planning, calculations of the ore volume and decision making. Nowadays, data base has to be updated by sources such as surveying positioning technologies and remote sensed photogrammetry data. The presented paper contains review of the methodology for the digital terrain model, i.e. DTM, modelling and obtaining data from surveying technologies in an open pit mine or quarry. This paper reviews the application of GPS, total station measurements, and ground photogrammetry for the volume accuracy assessment of a selected object. The testing field was situated in Belchatow lignite open pit mine. A suitable object had been selected. The testing layer of coal seam was located at 8’th pit sidewall excavation area. The data were acquired two times within one month period and it was connected with monthly DTM actualization of excavation. This paper presents the technological process and the results of the research of using digital photogrammetry for opencast mining purposes in the scope of numerical volume computation and monitoring the mines by comparison of different sources. The results shows that the presented workflow allow to build DTM manually and remote sensed and the accuracy assessment was presented by the volume computation pathway. Major advantages of the techniques are presented illustrating how a terrestrial photogrammetry techniques provide rapid spatial measurements of breaklines 3D data utilized to volume calculation.

  14. Transformative Reduction of Transportation Greenhouse Gas Emissions. Opportunities for Change in Technologies and Systems

    Energy Technology Data Exchange (ETDEWEB)

    Vimmerstedt, Laura [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brown, Austin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Newes, Emily [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Markel, Tony [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schroeder, Alex [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yimin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chipman, Peter [U.S. Department of Transportation, Washington, D.C. (United States); Johnson, Shawn [U.S. Department of Transportation, Washington, D.C. (United States)

    2015-04-30

    The transportation sector is changing, influenced by concurrent, ongoing, dynamic trends that could dramatically affect the future energy landscape, including effects on the potential for greenhouse gas emissions reductions. Battery cost reductions and improved performance coupled with a growing number of electric vehicle model offerings are enabling greater battery electric vehicle market penetration, and advances in fuel cell technology and decreases in hydrogen production costs are leading to initial fuel cell vehicle offerings. Radically more efficient vehicles based on both conventional and new drivetrain technologies reduce greenhouse gas emissions per vehicle-mile. Net impacts also depend on the energy sources used for propulsion, and these are changing with increased use of renewable energy and unconventional fossil fuel resources. Connected and automated vehicles are emerging for personal and freight transportation systems and could increase use of low- or non-emitting technologies and systems; however, the net effects of automation on greenhouse gas emissions are uncertain. The longstanding trend of an annual increase in transportation demand has reversed for personal vehicle miles traveled in recent years, demonstrating the possibility of lower-travel future scenarios. Finally, advanced biofuel pathways have continued to develop, highlighting low-carbon and in some cases carbon-negative fuel pathways. We discuss the potential for transformative reductions in petroleum use and greenhouse gas emissions through these emerging transportation-sector technologies and trends and present a Clean Transportation Sector Initiative scenario for such reductions, which are summarized in Table ES-1.

  15. In vitro cell quality of buffy coat platelets in additive solution treated with pathogen reduction technology

    DEFF Research Database (Denmark)

    Ostrowski, Sisse R; Bochsen, Louise; Salado-Jimena, José A

    2010-01-01

    Pathogen reduction technologies (PRTs) may induce storage lesion in platelet (PLT) concentrates. To investigate this, buffy coat PLTs (BCPs) in PLT additive solution (AS; SSP+) with or without Mirasol PRT (CaridianBCT Biotechnologies) were assessed by quality control tests and four-color flow...

  16. A numerical study on localized volume reduction in elastic media: some insights on the mechanics of anticracks

    CERN Document Server

    Katsman, R; Scher, H

    2005-01-01

    Porous rocks, subjected to compressive stress, often undergo mechanical compaction via grain crushing and grain rearrangement, and chemical compaction by pressure solution. Such volume reduction processes are known to spontaneously localize under certain conditions, creating compaction and compacting shear bands, solution-seams, and stylolites. However the localization process is poorly understood. The formation and propagation of compaction bands has recently been studied using an elasto-plastic Spring Network Model [Katsman, Aharonov, and Scher, 2005]. In the current paper, the same technique was employed to systematically analyze localized volume reduction (LVR) defects and their interactions with the surrounding elastic media, i. e., the stress distribution around an LVR region. Simulation results show that LVR regions experience stress concentrations at their tips, reminiscent of Mode I cracks. However, aside from this similarity point, comparison of stress around LVR regions to stress around cracks reve...

  17. Animal Science Technology. An Experimental Developmental Program. Volume II, Curriculum Course Outlines.

    Science.gov (United States)

    Brant, Herman G.

    This volume, the second of a two part evaluation report, is devoted exclusively to the presentation of detailed course outlines representing an Animal Science Technology curriculum. Arranged in 6 terms of study (2 academic years), outlines are included on such topics as: (1) Introductory Animal Science, (2) General Microbiology, (3) Zoonoses, (4)…

  18. Animal Science Technology. An Experimental Developmental Program. Volume I, Report of the Developmental Program.

    Science.gov (United States)

    Brant, Herman G.; And Others

    In 1961, administrative personnel at Delhi College in New York observed that formal training programs for animal science technicians were virtually nonexistant. Response to this apparent need resulted in the initiation of perhaps the first 2-year Animal Science Technology Program in the nation. This two-volume report is the result of an extensive…

  19. Influence of thyroid volume reduction on absorbed dose in 131I therapy studied by using Geant4 Monte Carlo simulation

    Science.gov (United States)

    Ziaur, Rahman; Sikander, M. Mirza; Waheed, Arshed; Nasir, M. Mirza; Waheed, Ahmed

    2014-05-01

    A simulation study has been performed to quantify the effect of volume reduction on the thyroid absorbed dose per decay and to investigate the variation of energy deposition per decay due to β- and γ-activity of 131I with volume/mass of thyroid, for water, ICRP- and ICRU-soft tissue taken as thyroid material. A Monte Carlo model of the thyroid, in the Geant4 radiation transport simulation toolkit was constructed to compute the β- and γ-absorbed dose in the simulated thyroid phantom for various values of its volume. The effect of the size and shape of the thyroid on energy deposition per decay has also been studied by using spherical, ellipsoidal and cylindrical models for the thyroid and varying its volume in 1-25 cm3 range. The relative differences of Geant4 results for different models with each other and MCNP results lie well below 1.870%. The maximum relative difference among the Geant4 estimated results for water with ICRP and ICRU soft tissues is not more than 0.225%. S-values for ellipsoidal, spherical and cylindrical thyroid models were estimated and the relative difference with published results lies within 3.095%. The absorbed fraction values for beta particles show a good agreement with published values within 2.105% deviation. The Geant4 based simulation results of absorbed fractions for gammas again show a good agreement with the corresponding MCNP and EGS4 results (±6.667%) but have 29.032% higher values than that of MIRD calculated values. Consistent with previous studies, the reduction of the thyroid volume is found to have a substantial effect on the absorbed dose. Geant4 simulations confirm dose dependence on the volume/mass of thyroid in agreement with MCNP and EGS4 computed values but are substantially different from MIRD8 data. Therefore, inclusion of size/mass dependence is indicated for 131I radiotherapy of the thyroid.

  20. Reduction Assemblage Models in the Interpretation of Lithic Technology at the Tosawihi Quarries, North-Central Nevada

    OpenAIRE

    Bloomer, William W.

    1991-01-01

    Preliminary results of the ongoing technological analysis of debitage recovered from the Tosawihi Chert Quarries illustrate how replication experiments are begin used to model technologically variable lithic reduction assemblages.

  1. Trajectories towards clean technology. Example of volatile organic compound emission reductions

    Energy Technology Data Exchange (ETDEWEB)

    Belis-Bergouignan, Marie-Claude; Oltra, Vanessa; Saint Jean, Maider [IFREDE-E3i, University Montesquieu-Bordeaux IV, Avenue Leon Duguit, Pessac 33608 (France)

    2004-02-20

    This article is based on the observation that, up until now, corporate investment has been limited in clean technologies despite the will of governmental authorities to stimulate them in order to cope with the demands of sustainable development. The paper deals with the issue of the development of clean technologies and the role of regulations as clean technology promoters. It tries to apprehend the characteristics and specificity of clean technology from both an empirical and a theoretical point of view, so as to understand which are the most favourable (or inversely, the most detrimental) conditions for their development. We use case studies concerning the reduction of volatile organic compound (VOC) emissions in the chemical and metallurgical industries. These two examples highlight the problems created by the shift from a 'with-solvent paradigm' to a 'solvent-free paradigm' and the way clean technology trajectories may spread within such paradigms. We show that the problem of clean technology development primarily resides in some factors that impede technological adoption, although a strong and mixed incentives framework prevails. Such impediments are sector-specific, leading to different clean technology trajectories among sectors and indicating areas of sectoral intervention that could become the cornerstones of complementary technology policy.

  2. Electrochemical processing of spent nuclear fuels: An overview of oxide reduction in pyroprocessing technology

    Directory of Open Access Journals (Sweden)

    Eun-Young Choi

    2015-12-01

    Full Text Available The electrochemical reduction process has been used to reduce spent oxide fuel to a metallic form using pyroprocessing technology for a closed fuel cycle in combination with a metal-fuel fast reactor. In the electrochemical reduction process, oxides fuels are loaded at the cathode basket in molten Li2O–LiCl salt and electrochemically reduced to the metal form. Various approaches based on thermodynamic calculations and experimental studies have been used to understand the electrode reaction and efficiently treat spent fuels. The factors that affect the speed of the electrochemical reduction have been determined to optimize the process and scale-up the electrolysis cell. In addition, demonstrations of the integrated series of processes (electrorefining and salt distillation with the electrochemical reduction have been conducted to realize the oxide fuel cycle. This overview provides insight into the current status of and issues related to the electrochemical processing of spent nuclear fuels.

  3. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part B, Remedial action, robotics/automation, waste management

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration (ER) and waste management (WN) problems at the Oak Ridge K-25 Site. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remediation, decontamination, and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume 3 B provides the Technology Evaluation Data Sheets (TEDS) for ER/WM activities (Remedial Action Robotics and Automation, Waste Management) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than each technology in Vol. 2. The TEDS are arranged alphanumerically by the TEDS code number in the upper right corner of each data sheet. Volume 3 can be used in two ways: (1) technologies that are identified from Vol. 2 can be referenced directly in Vol. 3 by using the TEDS codes, and (2) technologies and general technology areas (alternatives) can be located in the index in the front of this volume.

  4. Reduction of contrast medium volume in abdominal aorta CTA: Multiphasic injection technique versus a test bolus volume

    Energy Technology Data Exchange (ETDEWEB)

    Nijhof, Wouter H., E-mail: w.h.nijhof@student.utwente.nl [University of Twente, MIRA-Institute for Biomedical Technology and Technical Medicine, P.O. Box 21, 7500 AE Enschede (Netherlands); Vos, Charlotte S. van der, E-mail: c.s.vandervos@student.utwente.nl [University of Twente, MIRA-Institute for Biomedical Technology and Technical Medicine, P.O. Box 21, 7500 AE Enschede (Netherlands); Anninga, Bauke, E-mail: b.anninga@student.utwente.nl [University of Twente, MIRA-Institute for Biomedical Technology and Technical Medicine, P.O. Box 21, 7500 AE Enschede (Netherlands); Jager, Gerrit J., E-mail: g.jager@JBZ.nl [Department of Radiology, Jeroen Bosch Hospital, Henri Dunantstraat 1, 5223 GZ ’s-Hertogenbosch (Netherlands); Rutten, Matthieu J.C.M., E-mail: mj.rutten@online.nl [Department of Radiology, Jeroen Bosch Hospital, Henri Dunantstraat 1, 5223 GZ ’s-Hertogenbosch (Netherlands)

    2013-09-15

    Objective: The purpose of this study is to reduce the administered contrast medium volume in abdominal CTA by using a test bolus injection, with the preservation of adequate quantitative and qualitative vessel enhancement. Study design: For this technical efficacy study 30 patients, who were referred for a CTA examination of the abdominal aorta, were included. Randomly 15 patients were assigned to undergo a multiphasic injection protocol and received 89 mL of contrast medium (Optiray 350) (protocol I). Fifteen patients were assigned to the test bolus injection protocol (protocol II), which implies injection of a 10 mL test bolus of Optiray 350 prior to performing CTA with a 40 mL of contrast medium. Quantitative assessment of vascular enhancement was performed by measuring the amount of Hounsfield Units in the aorta at 30 positions from the celiac trunk to the iliac arteries in both groups. Qualitative assessment was performed by three radiologists who scored the images at a 5-point scale. Results: Quantitative assessment showed that there was no significant difference in vascular enhancement for patients between the two protocols, with mean attenuation values of 280.9 ± 50.84 HU and 258.60 ± 39.28 HU, respectively. The image quality of protocol I was rated 4.31 (range: 3.67/5.00) and of protocol II 4.11 (range: 2.67/5.00). These differences were not statistically significant. Conclusion: This study showed that by using a test bolus injection and the administration of 50 mL of contrast medium overall, CTA of the abdominal aorta can reliably be performed, with regard to quantitative and qualitative adequate vessel enhancement.

  5. Reduction of total lung capacity in obese men: comparison of total intrathoracic and gas volumes.

    Science.gov (United States)

    Watson, R A; Pride, N B; Thomas, E Louise; Fitzpatrick, J; Durighel, G; McCarthy, J; Morin, S X; Ind, P W; Bell, J D

    2010-06-01

    Restriction of total lung capacity (TLC) is found in some obese subjects, but the mechanism is unclear. Two hypotheses are as follows: 1) increased abdominal volume prevents full descent of the diaphragm; and 2) increased intrathoracic fat reduces space for full lung expansion. We have measured total intrathoracic volume at full inflation using magnetic resonance imaging (MRI) in 14 asymptomatic obese men [mean age 52 yr, body mass index (BMI) 35-45 kg/m2] and 7 control men (mean age 50 yr, BMI 22-27 kg/m2). MRI volumes were compared with gas volumes at TLC. All measurements were made with subjects supine. Obese men had smaller functional residual capacity (FRC) and FRC-to-TLC ratio than control men. There was a 12% predicted difference in mean TLC between obese (84% predicted) and control men (96% predicted). In contrast, differences in total intrathoracic volume (MRI) at full inflation were only 4% predicted TLC (obese 116% predicted TLC, control 120% predicted TLC), because mediastinal volume was larger in obese than in control [heart and major vessels (obese 1.10 liter, control 0.87 liter, P=0.016) and intrathoracic fat (obese 0.68 liter, control 0.23 liter, P80% predicted (ON) was 26% predicted TLC. Mediastinal volume was similar in OR (1.84 liter) and ON (1.73 liter), but total intrathoracic volume was 19% predicted TLC smaller in OR than in ON. We conclude that the major factor restricting TLC in some obese men was reduced thoracic expansion at full inflation.

  6. NASA's Vision for Potential Energy Reduction from Future Generations of Propulsion Technology

    Science.gov (United States)

    Haller, Bill

    2015-01-01

    Through a robust partnership with the aviation industry, over the past 50 years NASA programs have helped foster advances in propulsion technology that enabled substantial reductions in fuel consumption for commercial transports. Emerging global trends and continuing environmental concerns are creating challenges that will very likely transform the face of aviation over the next 20-40 years. In recognition of this development, NASA Aeronautics has established a set of Research Thrusts that will help define the future direction of the agency's research technology efforts. Two of these thrusts, Ultra-Efficient Commercial Vehicles and Transition to Low-Carbon Propulsion, serve as cornerstones for the Advanced Air Transport Technology (AATT) project. The AATT project is exploring and developing high-payoff technologies and concepts that are key to continued improvement in energy efficiency and environmental compatibility for future generations of fixed-wing, subsonic transports. The AATT project is primarily focused on the N+3 timeframe, or 3 generations from current technology levels. As should be expected, many of the propulsion system architectures technologies envisioned for N+3 vary significantly from todays engines. The use of batteries in a hybrid-electric configuration or deploying multiple fans distributed across the airframe to enable higher bypass ratios are just two examples of potential advances that could enable substantial energy reductions over current propulsion systems.

  7. Distributed technologies in California's energy future: A preliminary report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, M.; Craig, P.; McGuire, C.B.; Simmons, M. (eds.)

    1977-09-01

    The chapters in Volume 2 of Distributed Energy Systems in California's Future are: Environmental Impacts of Alternative Energy Technologies for California; Land Use Configurations and the Utilization of Distributive Energy Technology; Land Use Implications of a Dispersed Energy Path; Belief, Behavior, and Technologies as Driving Forces in Transitional Stages--The People Problem in Dispersed Energy Futures; Development of an Energy Attitude Survey; Interventions to Influence Firms Toward the Adoption of ''Soft'' Energy Technology; The Entry of Small Firms into Distributed Technology Energy Industries; Short-Term Matching of Supply and Demand in Electrical Systems with Renewable Sources; Vulnerability of Renewable Energy Systems; and District Heating for California.

  8. Oil and gas technology transfer activities and potential in eight major producing states. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    In 1990, the Interstate Oil and Gas Compact Commission (the Compact) performed a study that identified the structure and deficiencies of the system by which oil and gas producers receive information about the potential of new technologies and communicate their problems and technology needs back to the research community. The conclusions of that work were that major integrated companies have significantly more and better sources of technology information than independent producers. The majors also have significantly better mechanisms for communicating problems to the research and development (R&D) community. As a consequence, the Compact recommended analyzing potential mechanisms to improve technology transfer channels for independents and to accelerate independents acceptance and use of existing and emerging technologies. Building on this work, the Compact, with a grant from the US Department Energy, has reviewed specific technology transfer organizations in each of eight major oil producing states to identify specific R&D and technology transfer organizations, characterize their existing activities, and identify potential future activities that could be performed to enhance technology transfer to oil and gas producers. The profiles were developed based on information received from organizations,follow-up interviews, site visit and conversations, and participation in their sponsored technology transfer activities. The results of this effort are reported in this volume. In addition, the Compact has also developed a framework for the development of evaluation methodologies to determine the effectiveness of technology transfer programs in performing their intended functions and in achieving desired impacts impacts in the producing community. The results of that work are provided in a separate volume.

  9. Using Task Data in Diagnostic Radiology. Research Report No. 8. Volume 2. Curriculum Objectives for Radiologic Technology.

    Science.gov (United States)

    Gilpatrick, Eleanor; Gullion, Christina

    This volume is the result of the application of the Health Services Mobility Study (HSMS) curriculum design method in radiologic technology and is presented in conjunction with volume 1, which reports the task analysis results. Volume 2 contains job-related behavioral curriculum objectives for the aide, technician, and technologist levels in…

  10. Slope excavation quality assessment and excavated volume calculation in hydraulic projects based on laser scanning technology

    Directory of Open Access Journals (Sweden)

    Chao Hu

    2015-04-01

    Full Text Available Slope excavation is one of the most crucial steps in the construction of a hydraulic project. Excavation project quality assessment and excavated volume calculation are critical in construction management. The positioning of excavation projects using traditional instruments is inefficient and may cause error. To improve the efficiency and precision of calculation and assessment, three-dimensional laser scanning technology was used for slope excavation quality assessment. An efficient data acquisition, processing, and management workflow was presented in this study. Based on the quality control indices, including the average gradient, slope toe elevation, and overbreak and underbreak, cross-sectional quality assessment and holistic quality assessment methods were proposed to assess the slope excavation quality with laser-scanned data. An algorithm was also presented to calculate the excavated volume with laser-scanned data. A field application and a laboratory experiment were carried out to verify the feasibility of these methods for excavation quality assessment and excavated volume calculation. The results show that the quality assessment indices can be obtained rapidly and accurately with design parameters and scanned data, and the results of holistic quality assessment are consistent with those of cross-sectional quality assessment. In addition, the time consumption in excavation project quality assessment with the laser scanning technology can be reduced by 70%−90%, as compared with the traditional method. The excavated volume calculated with the scanned data only slightly differs from measured data, demonstrating the applicability of the excavated volume calculation method presented in this study.

  11. Bulk Volume Reduction of the Kimmeridge Clay Formation, North Sea (UK Due to Compaction, Petroleum Generation and Expulsion

    Directory of Open Access Journals (Sweden)

    Kenneth S. Okiongbo

    2011-02-01

    Full Text Available In this study, the effects of petroleum generation and expulsion on shale porosity is explored by evaluating the compaction of the Kimmeridge Clay Formation (KCF within the oil window using log data and shale samples from the KCF within the depth and temperature range of ~1.5-5.0 km and 90-157ºC, respectively. Petrophysical properties e.g porosity and pore-size distribution were measured, and permeability was calculated using empirical models based on the measured porosities. Transit-time values from the sonic logs recorded at depths in the wells were the cores were recovered were calibrated against the porosities determined from the core samples. Bulk geochemical parameters e.g., Total Organic Carbon (TOC, Hydrogen Index (HI were determined. The volume reduction in the KCF within the oil window due to petroleum generation and expulsion, and compaction due to loss of pore space was determined using the geochemical and log derived porosity data emplaced into empirical relations. Porosities above the oil window range from ~15-20%, but decreased to <5% at the end of the oil window. Pore-sizes decrease from ~11 nm to between 6-8 nm at the depth range of 1.5-5.0 km. Permeability decreased from 4.8 nD to ~0.095 nD. The quantitative estimations of volume reduction within the oil window indicate that for ~8.0wt% initial TOC sediment, a bulk volume reduction of 13% of the initial volume is due to oil expulsion, and ~12% is due to loss of pore space.

  12. Assessment of CO2 reduction potentials through clean coal technologies for future power plants in Indonesia

    Directory of Open Access Journals (Sweden)

    Monna Rozana

    2013-08-01

    Full Text Available This paper presents CO2 reduction potentials employing clean coal technologies for power plants in Indonesia. Whenlow ranked coal from huge reserves cannot be excluded from coal-fired power plants to meet electricity demand, it is criticalfor Indonesia to adopt the best available clean coal technologies for its future coal-fired power plants in order to minimizeCO2 emissions in a long term. Several types of coal-fired technologies are considered to be the best match with Indonesia’ssituation by assessing CO2 emissions from coal-fired power plants, levelized costs of electricity generation, and the cost ofCO2 avoidance. As a result, supercritical PC, IGCC, CFB, and PFBC technologies are presented as a consideration for policymaker in Indonesia.

  13. Meta-Analysis of Ultrafiltration versus Diuretics Treatment Option for Overload Volume Reduction in Patients with Acute Decompensated Heart Failure

    Directory of Open Access Journals (Sweden)

    Barkoudah Ebrahim

    2015-05-01

    Full Text Available Introduction: Although diuretics are mainly used for the treatment of acute decompensated heart failure (ADHF, inadequate responses and complications have led to the use of extracorporeal ultrafiltration (UF as an alternative strategy for reducing volume overloads in patients with ADHF. Objective: The aim of our study is to perform meta-analysis of the results obtained from studies on extracorporeal venous ultrafiltration and compare them with those of standard diuretic treatment for overload volume reduction in acute decompensated heart failure. Methods: MEDLINE, EMBASE, and the Cochrane Central Register of Controlled Trials databases were systematically searched using a pre‑specified criterion. Pooled estimates of outcomes after 48 h (weight change, serum creatinine level, and all-cause mortality were computed using random effect models. Pooled weighted mean differences were calculated for weight loss and change in creatinine level, whereas a pooled risk ratio was used for the analysis of binary all-cause mortality outcome. Results: A total of nine studies, involving 613 patients, met the eligibility criteria. The mean weight loss in patients who underwent UF therapy was 1.78 kg [95% Confidence Interval (CI: −2.65 to −0.91 kg; p < 0.001 more than those who received standard diuretic therapy. The post-intervention creatinine level, however, was not significantly different (mean change = −0.25 mg/dL; 95% CI: −0.56 to 0.06 mg/dL; p = 0.112. The risk of all-cause mortality persisted in patients treated with UF compared with patients treated with standard diuretics (Pooled RR = 1.00; 95% CI: 0.64–1.56; p = 0.993. Conclusion: Compared with standard diuretic therapy, UF treatment for overload volume reduction in individuals suffering from ADHF, resulted in significant reduction of body weight within 48 h. However, no significant decrease of serum creatinine level or reduction of all-cause mortality was observed.

  14. 5. annual clean coal technology conference: powering the next millennium. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increase demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal Technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains technical papers on: advanced coal process systems; advanced industrial systems; advanced cleanup systems; and advanced power generation systems. In addition, there are poster session abstracts. Selected papers from this proceedings have been processed for inclusion in the Energy Science and Technology database.

  15. A Novel Technology for Measurements of Dielectric Properties of Extremely Small Volumes of Liquids

    Directory of Open Access Journals (Sweden)

    Wei-Na Liu

    2016-01-01

    Full Text Available A high sensitivity sensor for measurement radio frequency (RF dielectric permittivity of liquids is described. Interference is used and parasitic effects are cancellation, which makes the sensor can catch weak signals caused by liquids with extremely small volumes. In addition, we present the relationship between transmission coefficient and permittivity of liquids under test (LUT. Using this sensor, quantitative measurements of the dielectric properties at 5.8 GHz are demonstrated of LUTs. Experiments show that the proposed method only requires the volume of 160 nanoliters for liquids. Therefore, the technology can be used for RF spectroscopic analysis of biological samples and extremely precious liquids.

  16. Environmental Technology Verification: Test Report of Mobile Source Selective Catalytic Reduction--Nett Technologies, Inc., BlueMAX 100 version A urea-based selective catalytic reduction technology

    Science.gov (United States)

    Nett Technologies’ BlueMAX 100 version A Urea-Based SCR System utilizes a zeolite catalyst coating on a cordierite honeycomb substrate for heavy-duty diesel nonroad engines for use with commercial ultra-low–sulfur diesel fuel. This environmental technology verification (ETV) repo...

  17. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part A, Decontamination and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Strategic Roadmap for the Oak Ridge Reservation is a generalized planning document that identifies broad categories of issues that keep ORNL outside full compliance with the law and other legally binding agreements. Possible generic paths to compliance, issues, and the schedule for resolution of the issues one identified. The role of the Oak Ridge National Laboratory Technology Logic Diagram (TLD) is then to identify specific site issues (problems), identify specific technologies that can be brought to bear on the issues, and assess the current status and readiness of these remediation technologies within the constraints of the schedule commitment. Regulatory requirements and commitments contained in the Strategic Roadmap for the Oak Ridge Reservation are also included in the TLD as constraints to the application of immature technological solutions. Some otherwise attractive technological solutions may not be employed because they may not be deployable on the schedule enumerated in the regulatory agreements. The roadmap for ORNL includes a list of 46 comprehensive logic diagrams for WM of low-level, radioactive-mixed, hazardous, sanitary and industrial. and TRU waste. The roadmapping process gives comparisons of the installation as it exists to the way the installation should exist under full compliance. The identification of the issues is the goal of roadmapping. This allows accurate and timely formulation of activities.

  18. Y-12 Plant Remedial Action technology logic diagram. Volume I: Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Program addresses remediation of the contaminated groundwater, surface water and soil in the following areas located on the Oak Ridge Reservation: Chestnut Ridge, Bear Creek Valley, the Upper and Lower East Fork Popular Creek Watersheds, CAPCA 1, which includes several areas in which remediation has been completed, and CAPCA 2, which includes dense nonaqueous phase liquid wells and a storage facility. There are many facilities within these areas that are contaminated by uranium, mercury, organics, and other materials. This Technology Logic Diagram identifies possible remediation technologies that can be applied to the soil, water, and contaminants for characterization, treatment, and waste management technology options are supplemented by identification of possible robotics or automation technologies. These would facilitate the cleanup effort by improving safety, of remediation, improving the final remediation product, or decreasing the remediation cost. The Technology Logic Diagram was prepared by a diverse group of more than 35 scientists and engineers from across the Oak Ridge Reservation. Most are specialists in the areas of their contributions. 22 refs., 25 tabs.

  19. Quantifying volume reduction and peak flow mitigation for three bioretention cells in clay soils in northeast Ohio.

    Science.gov (United States)

    Winston, Ryan J; Dorsey, Jay D; Hunt, William F

    2016-05-15

    Green infrastructure aims to restore watershed hydrologic function by more closely mimicking pre-development groundwater recharge and evapotranspiration (ET). Bioretention has become a popular stormwater control due to its ability to reduce runoff volume through these pathways. Three bioretention cells constructed in low permeability soils in northeast Ohio were monitored for non-winter quantification of inflow, drainage, ET, and exfiltration. The inclusion of an internal water storage (IWS) zone allowed the three cells to reduce runoff by 59%, 42%, and 36% over the monitoring period, in spite of the tight underlying soils. The exfiltration rate and the IWS zone thickness were the primary determinants of volume reduction performance. Post-construction measured drawdown rates were higher than pre-construction soil vertical hydraulic conductivity tests in all cases, due to lateral exfiltration from the IWS zones and ET, which are not typically accounted for in pre-construction soil testing. The minimum rainfall depths required to produce outflow for the three cells were 5.5, 7.4, and 13.8mm. During events with 1-year design rainfall intensities, peak flow reduction varied from 24 to 96%, with the best mitigation during events where peak rainfall rate occurred before the centroid of the rainfall volume, when adequate bowl storage was available to limit overflow.

  20. Brain Volume Reductions within Multiple Cognitive Systems in Male Preterm Children at Age Twelve

    Science.gov (United States)

    Kesler, Shelli R.; Reiss, Allan L.; Vohr, Betty; Watson, Christa; Schneider, Karen C.; Katz, Karol H.; Maller-Kesselman, Jill; Silbereis, John; Constable, R. Todd; Makuch, Robert W.; Ment, Laura R.

    2012-01-01

    Objectives To more precisely examine regional and subregional microstructural brain changes associated with preterm birth. Study design We obtained brain volumes from 29 preterm children, age 12 years, with no ultrasound scanning evidence of intraventricular hemorrhage or cystic periventricular leukomalacia in the newborn period, and 22 age- and sex-matched term control subjects. Results Preterm male subjects demonstrated significantly lower white matter volumes in bilateral cingulum, corpus callosum, corticospinal tract, prefrontal cortex, superior and inferior longitudinal fasciculi compared with term male subjects. Gray matter volumes in prefrontal cortex, basal ganglia, and temporal lobe also were significantly reduced in preterm male subjects. Brain volumes of preterm female subjects were not significantly different from those of term female control subjects. Voxel-based morphometry results were not correlated with perinatal variables or cognitive outcome. Higher maternal education was associated with higher cognitive performance in preterm male subjects. Conclusions Preterm male children continue to demonstrate abnormal neurodevelopment at 12 years of age. However, brain morphology in preterm female children may no longer differ from that of term female children. The neurodevelopmental abnormalities we detected in preterm male subjects appear to be relatively diffuse, involving multiple neural systems. The relationship between aberrant neurodevelopment and perinatal variables may be mediated by genetic factors, environmental factors, or both reflected in maternal education level. PMID:18346506

  1. A History of Psychosis in Bipolar Disorder is Associated With Gray Matter Volume Reduction.

    Science.gov (United States)

    Ekman, Carl Johan; Petrovic, Predrag; Johansson, Anette G M; Sellgren, Carl; Ingvar, Martin; Landén, Mikael

    2017-01-01

    Psychotic symptoms are prevalent in schizophrenia, bipolar disorder, and other psychiatric and neurological disorders, yet the neurobiological underpinnings of psychosis remain obscure. In the last decade, a large number of magnetic resonance imaging studies have shown differences in local gray matter volume between patients with different psychiatric syndromes and healthy controls. Few studies have focused on the symptoms, which these syndromes are constituted of. Here, we test the association between psychosis and gray matter volume by using a sample of 167 subjects with bipolar disorder, with and without a history of psychosis, and 102 healthy controls. Magnetic resonance images were analyzed on group level using a voxel-wise mass univariate analysis (Voxel-Based Morphometry). We found that patients with a history of psychosis had smaller gray matter volume in left fusiform gyrus, the right rostral dorsolateral prefrontal cortex, and the left inferior frontal gyrus compared with patients without psychosis and with healthy controls. There was no volume difference in these areas between the no-psychosis group and healthy controls. These areas have previously been structurally and functionally coupled to delusions and hallucinations. Our finding adds further evidence to the probability of these regions as key areas in the development of psychotic symptoms. © The Author 2016. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  2. Experimental Study ofa New Operative Procedure for Non-Ischemic Dilated Cardiomyopathy-Overlapping Cardiac Volume Reduction Operation

    Institute of Scientific and Technical Information of China (English)

    罗滨; 孟春营; 温定国; 松居喜朗; 安田庆秀

    2003-01-01

    Objectives To assess anewly devised procedure of cardiac volume reduction without resection of cardiac muscle and evaluated in experimental settings. Methods Ten beagle dogs underwent a rapid pacing leading to heart failure for 3 weeks and received the left ventricular reduction termed overlapping cardiac volume reduction operation (OLCVR) ,which consisted of a longitudinal incision in left ventricular (LV) free wall, sutures of the left marginal to the septal wall, and the right marginal to LV free wall.A slope of the linear preload recruitable stroke work relationship (Mw) , with a X - intercept (Vo) were calculated as the precise indicators of left ventricular systolic function. The constant of isovolumic pressure decay (Tau) and a peak filling rate (PFR) were also calculated as the indicators of LV diastolic function.Results LV end- diastolic dimensions was significantly reduced by OLCVR (43±2 to 25±1; mm).Fractional shortening was significantly improved by OLCVR (11±2 to 30±4;%). Mw (erg* cm-3* 103)was also significantly improved (21±2 to 33 ±3 (p<0. 001 ) ) , whereas Vo, Tau and PFR did not show significant changes. Conclusions The OLCVR significantly increased in the early LV systolic function without detrimental effects on diastolic function. This procedure may become a therapeutic option for end - stage cardiomyopathy.

  3. Proceedings of the environmental technology through industry partnership conference. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the Application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 2 contains 16 papers in a poster session and 8 papers in the contaminant plume containment and remediation and landfill stabilization Focus Areas. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  4. Technological cost-reduction pathways for attenuator wave energy converters in the marine hydrokinetic environment.

    Energy Technology Data Exchange (ETDEWEB)

    Bull, Diana L; Ochs, Margaret Ellen

    2013-09-01

    This report considers and prioritizes the primary potential technical costreduction pathways for offshore wave activated body attenuators designed for ocean resources. This report focuses on technical research and development costreduction pathways related to the device technology rather than environmental monitoring or permitting opportunities. Three sources of information were used to understand current cost drivers and develop a prioritized list of potential costreduction pathways: a literature review of technical work related to attenuators, a reference device compiled from literature sources, and a webinar with each of three industry device developers. Data from these information sources were aggregated and prioritized with respect to the potential impact on the lifetime levelized cost of energy, the potential for progress, the potential for success, and the confidence in success. Results indicate the five most promising costreduction pathways include advanced controls, an optimized structural design, improved power conversion, planned maintenance scheduling, and an optimized device profile.

  5. Western oil-shale development: a technology assessment. Volume 2: technology characterization and production scenarios

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    A technology characterization of processes that may be used in the oil shale industry is presented. The six processes investigated are TOSCO II, Paraho Direct, Union B, Superior, Occidental MIS, and Lurgi-Ruhrgas. A scanario of shale oil production to the 300,000 BPD level by 1990 is developed. (ACR)

  6. Fluid Vessel Quantity Using Non-invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

    Science.gov (United States)

    Garofalo, Anthony A

    2013-01-01

    The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

  7. Fluid Vessel Quantity using Non-Invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

    Science.gov (United States)

    Garofalo, Anthony A.

    2013-01-01

    The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

  8. Mid-term effects of lung volume reduction surgery on pulmonary function in patients with chronic obstructive pulmonary disease

    Institute of Scientific and Technical Information of China (English)

    LIU Jin-ming; WU Wen; LI Xia; Jonson Bjorn; YANG Wen-lan; JIANG Ge-ning; DING Jia-an; ZHENG Wei; LIU Wen-zeng; WANG Ying-min; GAO Bei-lan; JIANG Ping

    2007-01-01

    Background Now lung volume reduction surgery (LVRS) has become one of the most effective methods for the management of some cases of severe chronic obstructive pulmonary disease (COPD). We evaluated the mid-term effects of LVRS on pulmonary function in patients with severe COPD.Methods Ten male patients with severe COPD aged 38-70 years underwent LVRS and their pulmonary function was assessed before, 3 months and 3 years after surgery. The spirometric and gas exchange parameters included residual volume, total lung capacity, inspiratory capacity, forced vital capacity, forced expiratory volume in one second, diffusion capacity for CO, and arterial blood gas. A 6-minute walk distance (6MWD) test was performed.Results As to preoperative assessment, most spirometric parameters and 6MWD were significantly improved after 3 months and slightly 3 years after LVRS. Gas exchange parameters were significantly improved 3 months after surgery,but returned to the preoperative levels after 3 years.Conclusions LVRS may significantly improve pulmonary function in patients with severe COPD indicating for LVRS.Mid-term pulmonary function 3 years after surgery can be decreased to the level at 3 months after surgery. Three years after LVRS, lung volume and pulmonary ventilation function can be significantly improved, but the improvement in gas exchange function was not significant.

  9. Effects of a multidisciplinary body weight reduction program on static and dynamic thoraco-abdominal volumes in obese adolescents.

    Science.gov (United States)

    LoMauro, Antonella; Cesareo, Ambra; Agosti, Fiorenza; Tringali, Gabriella; Salvadego, Desy; Grassi, Bruno; Sartorio, Alessandro; Aliverti, Andrea

    2016-06-01

    The objective of this study was to characterize static and dynamic thoraco-abdominal volumes in obese adolescents and to test the effects of a 3-week multidisciplinary body weight reduction program (MBWRP), entailing an energy-restricted diet, psychological and nutritional counseling, aerobic physical activity, and respiratory muscle endurance training (RMET), on these parameters. Total chest wall (VCW), pulmonary rib cage (VRC,p), abdominal rib cage (VRC,a), and abdominal (VAB) volumes were measured on 11 male adolescents (Tanner stage: 3-5; BMI standard deviation score: >2; age: 15.9 ± 1.3 years; percent body fat: 38.4%) during rest, inspiratory capacity (IC) maneuver, and incremental exercise on a cycle ergometer at baseline and after 3 weeks of MBWRP. At baseline, the progressive increase in tidal volume was achieved by an increase in end-inspiratory VCW (p obese adolescents adopt a thoraco-abdominal operational pattern characterized by abdominal rib cage hyperinflation as a form of lung recruitment during incremental cycle exercise. Additionally, a short period of MBWRP including RMET is associated with improved exercise performance, lung and chest wall volume recruitment, unloading of respiratory muscles, and reduced dyspnea.

  10. A clip-based protocol for breast boost radiotherapy provides clear target visualisation and demonstrates significant volume reduction over time

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Lorraine [Department of Radiation Oncology, Northern Sydney Cancer Centre, Royal North Shore Hospital, Sydney, New South Wales (Australia); Cox, Jennifer [Department of Radiation Oncology, Northern Sydney Cancer Centre, Royal North Shore Hospital, Sydney, New South Wales (Australia); Faculty of Health Sciences, University of Sydney, Sydney, New South Wales (Australia); Morgia, Marita [Department of Radiation Oncology, Northern Sydney Cancer Centre, Royal North Shore Hospital, Sydney, New South Wales (Australia); Atyeo, John [Faculty of Health Sciences, University of Sydney, Sydney, New South Wales (Australia); Lamoury, Gillian [Department of Radiation Oncology, Northern Sydney Cancer Centre, Royal North Shore Hospital, Sydney, New South Wales (Australia)

    2015-09-15

    The clinical target volume (CTV) for early stage breast cancer is difficult to clearly identify on planning computed tomography (CT) scans. Surgical clips inserted around the tumour bed should help to identify the CTV, particularly if the seroma has been reabsorbed, and enable tracking of CTV changes over time. A surgical clip-based CTV delineation protocol was introduced. CTV visibility and its post-operative shrinkage pattern were assessed. The subjects were 27 early stage breast cancer patients receiving post-operative radiotherapy alone and 15 receiving post-operative chemotherapy followed by radiotherapy. The radiotherapy alone (RT/alone) group received a CT scan at median 25 days post-operatively (CT1rt) and another at 40 Gy, median 68 days (CT2rt). The chemotherapy/RT group (chemo/RT) received a CT scan at median 18 days post-operatively (CT1ch), a planning CT scan at median 126 days (CT2ch), and another at 40 Gy (CT3ch). There was no significant difference (P = 0.08) between the initial mean CTV for each cohort. The RT/alone cohort showed significant CTV volume reduction of 38.4% (P = 0.01) at 40 Gy. The Chemo/RT cohort had significantly reduced volumes between CT1ch: median 54 cm{sup 3} (4–118) and CT2ch: median 16 cm{sup 3}, (2–99), (P = 0.01), but no significant volume reduction thereafter. Surgical clips enable localisation of the post-surgical seroma for radiotherapy targeting. Most seroma shrinkage occurs early, enabling CT treatment planning to take place at 7 weeks, which is within the 9 weeks recommended to limit disease recurrence.

  11. US long distance fiber optic networks: Technology, evolution and advanced concepts. Volume 1: Executive summary

    Science.gov (United States)

    1986-01-01

    Over the past two decades, fiber optics has emerged as a highly practical and cost-efficient communications technology. Its competitiveness vis-a-vis other transmission media, especially satellite, has become a critical question. This report studies the likely evolution and application of fiber optic networks in the United States to the end of the century. The outlook for the technology of fiber systems is assessed and forecast, scenarios of the evolution of fiber optic network development are constructed, and costs to provide service are determined and examined parametrically as a function of network size and traffic carried. Volume 1 consists of the Executive Summary. Volume 2 focuses on fiber optic technology and long distance fiber optic networks. Volume 3 develops a traffic and financial model of a nationwide long distance transmission network. Among the study's most important conclusions are: revenue requirements per circuit for LATA-to-LATA fiber optic links are less than one cent per call minute; multiplex equipment, which is likely to be required in any competing system, is the largest contributor to circuit costs; the potential capacity of fiber optic cable is very large and as yet undefined; and fiber optic transmission combined with other network optimization schemes can lead to even lower costs than those identified in this study.

  12. Annual Science and Engineering Technology Conference/DOD Technology Exposition (7th). Volume 2. Wednesday - Thursday

    Science.gov (United States)

    2006-04-20

    to engine teams thru AF code AF added strong staff/tech support (AQR) Interview, Dr.P. Bevilaqua, NAE Skunk-PM, Invented Lift Fan FIRST: STO-SSDash-VL...wafer-scale Pilot Line for rapid technology development Producing 4” QVGA backplanes and TDs Tools, materials and processes developed to enable...Centers of Excellence • Co-Funded by AFOSR, TD and University • Extends the capabilities and scope of AFRL • Opens up opportunity for continued focus on AF

  13. RADON REDUCTION AND RADON-RESISTANT CONSTRUCTION DEMONSTRATIONS IN NEW YORK - VOLUME 2: APPENDICES

    Science.gov (United States)

    Growing concern about health risks associated with exposure to indoor radon, a radioactive gas found in varying amounts in nearly all houses, has underscored the need for dependable radon reduction methods in existing and newly constructed houses. Responding to this need, the U....

  14. Radar Derived Spatial Statistics of Summer Rain. Volume 2; Data Reduction and Analysis

    Science.gov (United States)

    Konrad, T. G.; Kropfli, R. A.

    1975-01-01

    Data reduction and analysis procedures are discussed along with the physical and statistical descriptors used. The statistical modeling techniques are outlined and examples of the derived statistical characterization of rain cells in terms of the several physical descriptors are presented. Recommendations concerning analyses which can be pursued using the data base collected during the experiment are included.

  15. What the Research Tells Us: Class Size Reduction. Information Capsule. Volume 1001

    Science.gov (United States)

    Romanik, Dale

    2010-01-01

    This Information Capsule examines the background and history in addition to research findings pertaining to class size reduction (CSR). This Capsule concludes that although educational researchers have not definitively agreed upon the effectiveness of CSR, given its almost universal public appeal, there is little doubt it is here to stay in some…

  16. RADON REDUCTION AND RADON-RESISTANT CONSTRUCTION DEMONSTRATIONS IN NEW YORK - VOLUME 2: APPENDICES

    Science.gov (United States)

    Growing concern about health risks associated with exposure to indoor radon, a radioactive gas found in varying amounts in nearly all houses, has underscored the need for dependable radon reduction methods in existing and newly constructed houses. Responding to this need, the U....

  17. Reviews on current carbon emission reduction technologies and projects and their feasibilities on ships

    Science.gov (United States)

    Wang, Haibin; Zhou, Peilin; Wang, Zhongcheng

    2017-06-01

    Concern about global climate change is growing, and many projects and researchers are committed to reducing greenhouse gases from all possible sources. International Maritime (IMO) has set a target of 20% CO2 reduction from shipping by 2020 and also presented a series of carbon emission reduction methods, which are known as Energy Efficiency Design Index (EEDI) and Energy Efficiency Operation Indicator (EEOI). Reviews on carbon emission reduction from all industries indicate that, Carbon Capture and Storage (CCS) is an excellent solution to global warming. In this paper, a comprehensive literature review of EEDI and EEOI and CCS is conducted and involves reviewing current policies, introducing common technologies, and considering their feasibilities for marine activities, mainly shipping. Current projects are also presented in this paper, thereby illustrating that carbon emission reduction has been the subject of attention from all over the world. Two case ship studies indicate the economic feasibility of carbon emission reduction and provide a guide for CCS system application and practical installation on ships.

  18. Innovative cross-flow membrane system for volume reduction of mixed waste

    Energy Technology Data Exchange (ETDEWEB)

    Greene, W. [SpinTek Membrane Systems, Huntington Beach, CA (United States)

    1997-10-01

    In this task, SpinTek Membrane Systems, Inc., and the Institute of Gas Technology are completing engineering development leading to a full-scale demonstration of the SpinTek ST-II High Shear Rotary Membrane Filtration System (ST-II) under a Program Research and Development Agreement (PRDA) with the Federal Energy Technology Center-Morgantown. The SpinTek ST-II technology will be scaled-up, and a two-stage ST-II system will be designed, constructed, and operated on both surrogate and actual feed at the Los Alamos National Laboratory (LANL) Liquid Radioactive Waste Treatment Facility (LRWTF). Results from these studies on both surrogate and actual wastewater streams will also be used by LANL personnel to produce a model for determining the applicability and economics of the SpinTek ST-II system to other DOE waste and process streams. The ST-II is a unique, compact cross-flow membrane system having several advantages in performance and cost compared to currently available systems. Staff at LANL have performed pilot-scale testing with the SpinTek technology to evaluate its feasibility for enhanced radionuclide removal from wastewater at its 5- to 8-million-gallon-per-year LRWTF. Recent data have shown the system`s capabilities to remove radionuclides from the waste stream at concentration factors greater than 2000:1, and performance has exceeded both conventional and all other advanced technologies examined.

  19. Poor man medical pneumoplasty: Bronchoscopic lung volume reduction with hot saline versus dissolved doxycycline as a neoteric remedy of pulmonary emphysema

    Directory of Open Access Journals (Sweden)

    A.M. Abumossalam

    2016-01-01

    Conclusion: Bronchoscopic lung volume reduction by hot saline and dissolved doxycycline comes into sight to be a safe and feasible profile with an acceptable outcome that presents an attractive substitute to COPD patients who are physiologically friable.

  20. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

  1. Mass anomalous dimension of Adjoint QCD at large N from twisted volume reduction

    CERN Document Server

    Pérez, Margarita García; Keegan, Liam; Okawa, Masanori

    2015-01-01

    In this work we consider the $SU(N)$ gauge theory with two Dirac fermions in the adjoint representation, in the limit of large $N$. In this limit the infinite-volume physics of this model can be studied by means of the corresponding twisted reduced model defined on a single site lattice. Making use of this strategy we study the reduced model for various values of $N$ up to 289. By analyzing the eigenvalue distribution of the adjoint Dirac operator we test the conformality of the theory and extract the corresponding mass anomalous dimension.

  2. Special Aviation Fire and Explosion Reduction (SAFER) Advisory Committee. Volume I.

    Science.gov (United States)

    1980-06-26

    A. Burgess LxpLosafe America, Inc. R. L. Bywaterrs U.S. Army Research & Technology Lab AircratL Safzty Specialist W. G. DIikek Exxon Research...to develop new sources of crude oil such as synjet derived from coal or shale oil must not overlook their post-crash fuel fire hazard potential

  3. Breast Cancer Survivors’ Beliefs and Preferences Regarding Technology-Supported Sedentary Behavior Reduction Interventions

    Directory of Open Access Journals (Sweden)

    Bonnie J. Spring

    2016-08-01

    Full Text Available Purpose: Less time spent in sedentary behaviors is associated with improved health and disease outcomes in breast cancer survivors. However, little is known about survivors’ interest in sedentary behavior reduction interventions and how to effectively reduce this risk behavior. The purpose of this study was to explore breast cancer survivors’ interest in and preferences for technology-supported sedentary behavior reduction interventions. Methods: Breast cancer survivors (n = 279; Mage = 60.7 (SD = 9.7 completed a battery of online questionnaires. Descriptive statistics were calculated for all data. To examine potential relationships between demographic, disease and behavioral factors, and survivors’ interest in a technology-supported sedentary behavior reduction intervention, we conducted logistic regression analyses. These same factors were examined in relation to the perceptions of the effectiveness of such intervention using multiple regression analyses. Results: On average, survivors spent 10.1 (SD = 4.3 hours/day in sedentary activity. They believed prolonged periods of sedentary behavior were harmful to their health (87.0% and that reducing sedentary behavior could improve their health (88.4%. Survivors believed they should move around after 30–60 (56.7% or ≥ 60 (29.9% minutes of sedentary behavior and indicated they were most likely to replace sedentary behaviors with walking around (97.1% or walking in place (73.4%. The majority of survivors (79.9% was interested in participating in a technology-supported sedentary behavior reduction intervention and indicated they would use a smartphone application (61.3% 2–3 times/day (48.0%, 6 to 7 days/week (52.0%. Most survivors (73.5% believed reminders would help them decrease sedentary behavior and preferred they be delivered after sitting for 60 minutes (60.5% via vibrations on a wrist worn activity tracker (77.3% or text messages (54.4%. Conclusions: Technology-supported sedentary

  4. A Synergy Framework for the integration of Earth Observation technologies into Disaster Risk Reduction

    Science.gov (United States)

    Gaetani, Francesco; Petiteville, Ivan; Pisano, Francesco; Rudari, Roberto; St Pierre, Luc

    2015-04-01

    Earth observations and space-based applications have seen a considerable advance in the last decade, and such advances should find their way in applications related to DRR, climate change and sustainable development, including in the indicators to monitor advances in these areas. The post-2015 framework for disaster risk reduction, as adopted by the 3rd WCDRR is a action-oriented framework for disaster risk reduction that builds on modalities of cooperation linking local, national, regional and global efforts. Earth observations from ground and space platforms and related applications will play a key role in facilitating the implementation of the HFA2 and represent a unique platform to observe and assess how risks have changed in recent years, as well as to track the reduction in the level of exposure of communities. The proposed white paper focuses mainly on Earth Observation from space but it also addresses the use of other sources of data ( airborne, marine, in-situ, socio-economic and model outputs) in combination to remote sensing data. Earth observations (EO) and Space-based technologies can play a crucial role in contributing to the generation of relevant information to support informed decision-making regarding risk and vulnerability reduction and to address the underlying factors of disaster risk. For example, long series of Earth observation data collected over more than 30 years already contribute to track changes in the environment and in particular, environmental degradation around the world. Earth observation data is key to the work of the scientific community. Whether due to inadequate land-use policies, lack of awareness or understanding regarding such degradation, or inadequate use of natural resources including water and the oceans; Earth observation technologies are now routinely employed by many Ministries of Environment and Natural Resources worldwide to monitor the extent of degradation and a basis to design and enact new environmental

  5. Study of Electrochemical Reduction of CO2 for Future Use in Secondary Microbial Electrochemical Technologies.

    Science.gov (United States)

    Gimkiewicz, Carla; Hegner, Richard; Gutensohn, Mareike F; Koch, Christin; Harnisch, Falk

    2017-03-09

    The fluctuation and decentralization of renewable energy have triggered the search for respective energy storage and utilization. At the same time, a sustainable bioeconomy calls for the exploitation of CO2 as feedstock. Secondary microbial electrochemical technologies (METs) allow both challenges to be tackled because the electrochemical reduction of CO2 can be coupled with microbial synthesis. Because this combination creates special challenges, the electrochemical reduction of CO2 was investigated under conditions allowing microbial conversions, that is, for their future use in secondary METs. A reproducible electrodeposition procedure of In on a graphite backbone allowed a systematic study of formate production from CO2 with a high number of replicates. Coulomb efficiencies and formate production rates of up to 64.6±6.8 % and 0.013±0.002 mmolformate  h(-1)  cm(-2) , respectively, were achieved. Electrode redeposition, reusability, and long-term performance were investigated. Furthermore, the effect of components used in microbial media, that is, yeast extract, trace elements, and phosphate salts, on the electrode performance was addressed. The results demonstrate that the integration of electrochemical reduction of CO2 in secondary METs can become technologically relevant.

  6. Design Report of Volume Reduction and Handling Equipment of ACPF Wastes

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, K. C.; Ku, J. H.; Lee, W. K.; Lee, E. P.; Choung, W. M.; Cho, I. J.; Kook, D. H.; You, G. S.; Youn, J. S

    2007-01-15

    For the efficient disposal of wastes from the ACPF (Advanced spent fuel Conditioning Process Facility), hot cell filter press equipment, vacuum press equipment of compatible wastes and hot cell auxiliary crane were developed. The filter press equipment installed in hot cell is pneumatically driven and remotely operated. In order to avoid the contamination of hot cell by dust particles from filters being compressed, it is designed to compress filters with them put into the basket of the solid wastes cask. The performance test showed that the height of a filter was reduced by more than 75% and a basket could contain up to four compressed filters. The vacuum press equipment reduces the volume of the plastic bag containing compatible wastes such as cloth, plastic film and paper by vacuumizing the bag. It consists of the vacuum pump, the suction and HEPA filters and the manual pneumatic valve, and is designed to be easily handled and managed. Through the performance test, it is observed that the volume of wastes was reduced to a third. Also an additional crane of 300 kg capacity was manufactured and installed in the ACP hot cell to handle the salt ingot wastes container located where the overhead crane is not accessible. This report presenting the details of the design, manufacturing and performance of these equipment will be used as technical materials for the operation of the facility and the development of equipment.

  7. Reduction of the cerebrovascular volume in a transgenic mouse model of Alzheimer's disease.

    Science.gov (United States)

    Bourasset, Fanchon; Ouellet, Mélissa; Tremblay, Cyntia; Julien, Carl; Do, Tuan Minh; Oddo, Salvatore; LaFerla, Frank; Calon, Frédéric

    2009-03-01

    Combined evidence from neuroimaging and neuropathological studies shows that signs of vascular pathology and brain hypoperfusion develop early in Alzheimer's disease (AD). To investigate the functional implication of these abnormalities, we have studied the cerebrovascular volume and selected markers of blood-brain barrier (BBB) integrity in 11-month-old 3 x Tg-AD mice, using the in situ brain perfusion technique. The cerebrovascular volume of distribution of two vascular space markers, [3H]-inulin and [14C]-sucrose, was significantly lower (-26% and -27%, respectively; p diazepam was similar between 3xTg-AD mice and controls, suggesting no difference in the functional integrity of the BBB. We also report a 32% increase (p < 0.001) in the thickness of basement membranes surrounding cortical microvessels along with a 20% increase (p < 0.05) of brain collagen content in 3xTg-AD mice compared to controls. The present data indicate that the cerebrovascular space is reduced in a mouse model of Abeta and tau accumulation, an observation consistent with the presence of cerebrovascular pathology in AD.

  8. A Novel Eco-Friendly Vanadium Precipitation Method by Hydrothermal Hydrogen Reduction Technology

    Directory of Open Access Journals (Sweden)

    Guobin Zhang

    2017-09-01

    Full Text Available In view of the serious pollution problems caused by the traditional vanadium precipitation process, the eco-friendly technology of hydrothermal hydrogen reduction was first applied to precipitate phase pure vanadium sesquioxide (V2O3 products from stripped pentavalent vanadium (V (V solution extracted from vanadium-bearing shale. Thermodynamic analysis demonstrate the method of hydrothermal hydrogen reduction is feasible for precipitating V2O3 from V (V solution at a suitable pH range, and the reduction should better be carried out at a lower pH under the pH range in which V2O3 can exist stably. The V2O3 products of 99.92% in purity and a high vanadium precipitation percentage of 99.25% were achieved under a facile reaction condition of initial solution pH of 6, reaction temperature of 523 K, H2 partial pressure of 4 MPa and reaction time of 2 h. Based on the analysis of XRD and FE-SEM with EDS for the precipitation products obtained at serial reaction times, the phase transformation mechanism was summarized to serial reductions with the phase transformation of HxVyOz(2z−x−5y− → NaV2O5 → VO2(H2O0.5 → VOOH → V2O3. Compared with the two-step traditional method of precipitating vanadium with ammonium salt and roast-reduction (react at above 773 K for more than 3 h for preparing V2O3, this method only experiences one-step reduction under a green atmosphere of H2 gas with a lower reaction temperature of 523 K and a shorter reaction time of 2h. Therefore, this method for vanadium precipitation is characterized by being eco-friendly, having a short process and being low-energy consumption, which has great significance for the sustainable development of vanadium industry.

  9. Lung Volume Reduction in Chronic Obstructive Pulmonary Disease (COPD AND#8211; An Updated Review of Surgical and Endoscopic Procedures

    Directory of Open Access Journals (Sweden)

    Ramakant Dixit

    2012-08-01

    Full Text Available The conventional medical management of emphysema using bronchodilators and anti-inflammatory agents has a limited benefit in patients having advanced hyperinflation of lungs due to destruction of elastic tissue. The natural course of Chronic Obstructive Pulmonary Disease (COPD has been shown to be altered by only smoking cessation and oxygen therapy so far. The lung volume reduction surgery is viewed as another modality to change the natural history of emphysema in recent years. For patients with more generalized emphysema, resection of lung parenchyma improves elastic recoil and chest wall mechanics. An extensive literature search has demonstrated that carefully selected patients of emphysema (i.e. upper lobe predominant disease, low exercise capacity and Forced Expiratory Volume in First Second (FEV1 and DLco and #8804; 20% of predicted receive benefits in terms of symptomatic improvement and physiologic response following Lung Volume Reduction Surgery (LVRS. The resurgent interest in LVRS and National Emphysema Treatment Trial findings for emphysema have stimulated a range of innovative methods, to improve the outcome and reduce complications associated with current LVRS techniques. These novel approaches include surgical resection with compression/banding devices, endobronchial blockers, sealants, obstructing devices and valves and endobronchial bronchial bypass approaches. Experimental data and preliminary results are becoming available for some of these approaches. Most of the published studies so far have been uncontrolled and unblinded. Overall, extensive research in the near future will help to determine the potential clinical applicability of these new approaches to the treatment of emphysema symptoms. [Arch Clin Exp Surg 2012; 1(4.000: 249-257

  10. A reliable and consistent production technology for high volume compacted graphite iron castings

    Institute of Scientific and Technical Information of China (English)

    Liu Jincheng

    2014-01-01

    The demands for improved engine performance, fuel economy, durability, and lower emissions provide a continual chalenge for engine designers. The use of Compacted Graphite Iron (CGI) has been established for successful high volume series production in the passenger vehicle, commercial vehicle and industrial power sectors over the last decade. The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes, in China and globaly. The production window range for stable CGI is narrow and constantly moving. Therefore, any one step single addition of magnesium aloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings. The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity, without risking the formation of lfake graphite. The technology is currently being used in high volume Chinese foundry production. The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.

  11. Reduction of blurring in broadband volume holographic imaging using a deconvolution method

    Science.gov (United States)

    Lv, Yanlu; Zhang, Xuanxuan; Zhang, Dong; Zhang, Lin; Luo, Yuan; Luo, Jianwen

    2016-01-01

    Volume holographic imaging (VHI) is a promising biomedical imaging tool that can simultaneously provide multi-depth or multispectral information. When a VHI system is probed with a broadband source, the intensity spreads in the horizontal direction, causing degradation of the image contrast. We theoretically analyzed the reason of the horizontal intensity spread, and the analysis was validated by the simulation and experimental results of the broadband impulse response of the VHI system. We proposed a deconvolution method to reduce the horizontal intensity spread and increase the image contrast. Imaging experiments with three different objects, including bright field illuminated USAF test target and lung tissue specimen and fluorescent beads, were carried out to test the performance of the proposed method. The results demonstrated that the proposed method can significantly improve the horizontal contrast of the image acquire by broadband VHI system. PMID:27570703

  12. High-Throughput Spheroid Screens Using Volume, Resazurin Reduction, and Acid Phosphatase Activity.

    Science.gov (United States)

    Ivanov, Delyan P; Grabowska, Anna M; Garnett, Martin C

    2017-01-01

    Mainstream adoption of physiologically relevant three-dimensional models has been slow in the last 50 years due to long, manual protocols with poor reproducibility, high price, and closed commercial platforms. This chapter describes high-throughput, low-cost, open methods for spheroid viability assessment which use readily available reagents and open-source software to analyze spheroid volume, metabolism, and enzymatic activity. We provide two ImageJ macros for automated spheroid size determination-for both single images and images in stacks. We also share an Excel template spreadsheet allowing users to rapidly process spheroid size data, analyze plate uniformity (such as edge effects and systematic seeding errors), detect outliers, and calculate dose-response. The methods would be useful to researchers in preclinical and translational research planning to move away from simplistic monolayer studies and explore 3D spheroid screens for drug safety and efficacy without substantial investment in money or time.

  13. Pancreas volume reduction and metabolic effects in Japanese patients with severe obesity following laparoscopic sleeve gastrectomy.

    Science.gov (United States)

    Umemura, Akira; Sasaki, Akira; Nitta, Hiroyuki; Baba, Shigeaki; Ando, Taro; Kajiwara, Takashi; Ishigaki, Yasushi

    2017-03-17

    This study aimed to assess the relationship between the metabolic effect after laparoscopic sleeve gastrectomy (LSG) in morbidly obese Japanese patients, with or without type 2 diabetes mellitus (T2DM), and improved pancreatic steatosis (PS). The study enrolled 27 morbidly obese Japanese patients who were undergoing LSG. Their clinical and metabolic effects were evaluated at baseline and six months after LSG. Pancreas volume (PV), pancreatic attenuation (PA), and splenic attenuation (SA) were measured using a 64-row computed tomography (CT). Changes in PV, PA-SA, and PA/SA were evaluated. The mean body-weight loss, body mass index loss, and percentage of excess weight loss (%EWL) were -34.4 kg (p < 0.001), -11.0 kg/m(2) (p < 0.001), and 43.7%, respectively. The mean PV was 96.7 mL at baseline, and it decreased six months after LSG (-16.3mL, p < 0.001). The mean PA significantly increased six months after LSG (9.5 HU, p < 0.001). PA-SA (-23.2 HU vs. -13.3 HU, p = 0.003), and PA/SA (0.54 vs. 0.73, p < 0.001) also significantly increased six months after LSG. In T2DM patients, decreased PV correlated with decreased fasting blood sugar, decreased insulin, and reduced liver volume. In conclusion, PV significantly decreased after LSG in morbidly obese Japanese patients, and that decrease correlated with improvements in PS. In addition, PS plays an important role of development and progression of insulin resistance and T2DM.

  14. Volume reduction of the jugular foramina in Cavalier King Charles Spaniels with syringomyelia

    Directory of Open Access Journals (Sweden)

    Schmidt Martin

    2012-09-01

    Full Text Available Abstract Background Understanding the pathogenesis of the chiari-like malformation in the Cavalier King Charles Spaniel (CKCS is incomplete, and current hypotheses do not fully explain the development of syringomyelia (SM in the spinal cords of affected dogs. This study investigates an unconventional pathogenetic theory for the development of cerebrospinal fluid (CSF pressure waves in the subarachnoid space in CKCS with SM, by analogy with human diseases. In children with achondroplasia the shortening of the skull base can lead to a narrowing of the jugular foramina (JF between the cranial base synchondroses. This in turn has been reported to cause a congestion of the major venous outflow tracts of the skull and consequently to an increase in the intracranial pressure (ICP. Amongst brachycephalic dog breeds the CKCS has been identified as having an extremely short and wide braincase. A stenosis of the JF and a consequential vascular compromise in this opening could contribute to venous hypertension, raising ICP and causing CSF jets in the spinal subarachnoid space of the CKCS. In this study, JF volumes in CKCSs with and without SM were compared to assess a possible role of this pathologic mechanism in the development of SM in this breed. Results Computed tomography (CT scans of 40 CKCSs > 4 years of age were used to create three-dimensional (3D models of the skull and the JF. Weight matched groups (7–10 kg of 20 CKCSs with SM and 20 CKCSs without SM were compared. CKCSs without SM presented significantly larger JF -volumes (median left JF: 0.0633 cm3; median right JF: 0.0703 cm3; p 3; median right JF: 0.0434 cm3; p Conclusion A stenosis of the JF and consecutive venous congestion may explain the aetiology of CSF pressure waves in the subarachnoid space, independent of cerebellar herniation, as an additional pathogenetic factor for the development of SM in this breed.

  15. Data summary of municipal solid waste management alternatives. Volume 3, Appendix A: Mass burn technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1992-10-01

    This appendix on Mass Burn Technologies is the first in a series designed to identify, describe and assess the suitability of several currently or potentially available generic technologies for the management of municipal solid waste (MSW). These appendices, which cover eight core thermoconversion, bioconversion and recycling technologies, reflect public domain information gathered from many sources. Representative sources include: professional journal articles, conference proceedings, selected municipality solid waste management plans and subscription technology data bases. The information presented is intended to serve as background information that will facilitate the preparation of the technoeconomic and life cycle mass, energy and environmental analyses that are being developed for each of the technologies. Mass burn has been and continues to be the predominant technology in Europe for the management of MSW. In the United States, the majority of the existing waste-to-energy projects utilize this technology and nearly 90 percent of all currently planned facilities have selected mass burn systems. Mass burning generally refers to the direct feeding and combustion of municipal solid waste in a furnace without any significant waste preprocessing. The only materials typically removed from the waste stream prior to combustion are large bulky objects and potentially hazardous or undesirable wastes. The technology has evolved over the last 100 or so years from simple incineration to the most highly developed and commercially proven process available for both reducing the volume of MSW and for recovering energy in the forms of steam and electricity. In general, mass burn plants are considered to operate reliably with high availability.

  16. Efficacy of High-volume Evacuator in Aerosol Reduction: Truth or Myth? A Clinical and Microbiological Study

    Directory of Open Access Journals (Sweden)

    Hitesh Desarda

    2014-09-01

    Full Text Available Background and aims. Basic periodontal treatment aims at eliminating supra- and sub-gingival plaque and establishing conditions which will allow effective self-performed plaque control. This aim is primarily achieved with sonic and ultrasonic scalers. However, generation of bacterial aerosols during these procedures is of great concern to patients, the dentist and the dental assistant. The aim of this study was to compare the reduction in aerosol with and without high-volume evacuator through a microbiological study. Materials and methods. For this clinical study a fumigated closed operatory was selected. Maxillary incisors and canines were selected as an area for scaling. Piezoelectric ultrasonic scaling was performed in the absence and in the presence of a high-volume evacuator at 12 and 20 inches from the patient's oral cavity. In both groups scaling was carried out for 10 minutes. Nutrient agar plates were exposed for a total of 20 minutes. After this procedure, nutrient agar plates were incubated in an incubator at 37°C for 24 hours. The next day the nutrient agar plates were examined for colony forming units by a single microbiologist. Results. The results showed no statistically significant differences in colony forming units (CFU with and without the use of a high-volume evacuator either at 12 or 20 inches from the patient’s oral cavity. Conclusion. It was concluded that high-volume evacuator, when used as a separate unit without any modification, is not effective in reducing aerosol counts and environmental contamination.

  17. Technology Roadmap. Energy Loss Reduction and Recovery in Industrial Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2004-11-01

    To help guide R&D decision-making and gain industry insights on the top opportunities for improved energy systems, ITP sponsored the Energy Loss Reduction and Recoveryin Energy Systems Roadmapping Workshopin April 2004 in Baltimore, Maryland. This Technology Roadmapis based largely on the results of the workshop and additional industrial energy studies supported by ITP and EERE. It summarizes industry feedback on the top opportunities for R&D investments in energy systems, and the potential for national impacts on energy use and the environment.

  18. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 3. Gas and drilling

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 3 contains papers from the sessions on natural gas supporting research, western gas sands project, drilling technology, and environmental effects. Individuals were processed for inclusion in the Energy Data Base.

  19. Fighting Testing ACAT/FRRP: Automatic Collision Avoidance Technology/Fighter Risk Reduction Project

    Science.gov (United States)

    Skoog, Mark A.

    2009-01-01

    This slide presentation reviews the work of the Flight testing Automatic Collision Avoidance Technology/Fighter Risk Reduction Project (ACAT/FRRP). The goal of this project is to develop common modular architecture for all aircraft, and to enable the transition of technology from research to production as soon as possible to begin to reduce the rate of mishaps. The automated Ground Collision Avoidance System (GCAS) system is designed to prevent collision with the ground, by avionics that project the future trajectory over digital terrain, and request an evasion maneuver at the last instance. The flight controls are capable of automatically performing a recovery. The collision avoidance is described in the presentation. Also included in the presentation is a description of the flight test.

  20. Adoption of voluntary water-pollution reduction technologies and water quality perception among Danish farmers

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni; Andersen, Laura Mørch; Pedersen, Søren Marcus

    2015-01-01

    The adoption of voluntary nutrient reduction technologies among Danish farmers is relatively low despite the introduction of a number of incentives to do so. With data from 267 farmers, this study analyzes the level of adoption of these technologies and the farmers’ perception of water quality......, existing regulatory measures and their implementation strategies. In general, farmers perceive the water quality to be above average and indicate a strong opposition to penalties for non-compliance. Results of two ordered probit models on adoption and perception show a significant importance of farm...... and soil types, farm size and slopes and information availability. These findings point to the need for increased information dissemination on water quality requirements both at national and regional levels and technical and institutional support for the existing and future incentives....

  1. Recovery Act: SeaMicro Volume Server Power Reduction Research Development

    Energy Technology Data Exchange (ETDEWEB)

    Gary Lauterbach

    2012-03-22

    Cloud data centers are projected to be the fastest growing segment of the server market through 2015, according to IDC. Increasingly people and businesses rely on the Cloud to deliver digital content quickly and efficiently. Recovery Act funding from the Department of Energy has helped SeaMicro's technologies enhance the total cost of operation, performance and energy efficiency in large data center and Cloud environments. SeaMicro's innovative supercomputer fabric connects thousands of processor cores, memory, storage and input/output traffic. The company's fabric supports multiple processor instruction sets. Current systems featuring SeaMicro technology typically use one quarter the power and take one sixth the space of traditional servers with the same compute performance, yet deliver up to 12 times the bandwidth per core. Mozilla and eHarmony are two customers successfully using SeaMicro's technology. Numerous non-public customers have been successfully using the SeaMicro product in test and production facilities. As a result of the Recovery Act funding from the U.S. Department of Energy, more than 50 direct jobs were created at SeaMicro. To date, they primarily have been high-value, engineering jobs. Hardware, software and manufacturing engineering positions have been created, as well as sales and sales engineering. The positions have allowed SeaMicro to significantly accelerate engineering development and accelerate commercialization. As a result, commercialization and delivery to market are months ahead of initial schedule. Additional jobs were indirectly created through the development of the SeaMicro product. Through many years of research and hard work prior to receipt of public funding, SeaMicro was awarded 2 patents for its work. SeaMicro's product led the way for industry leaders to reconsider the market for low power servers and create new product lines. With valuable support of the U.S. Department of Energy and through Sea

  2. LCOE reduction potential of parabolic trough and solar tower CSP technology until 2025

    Science.gov (United States)

    Dieckmann, Simon; Dersch, Jürgen; Giuliano, Stefano; Puppe, Michael; Lüpfert, Eckhard; Hennecke, Klaus; Pitz-Paal, Robert; Taylor, Michael; Ralon, Pablo

    2017-06-01

    Concentrating Solar Power (CSP), with an installed capacity of 4.9 GW by 2015, is a young technology compared to other renewable power generation technologies. A limited number of plants and installed capacity in a small challenging market environment make reliable and transparent cost data for CSP difficult to obtain. The International Renewable Energy Agency (IRENA) and the DLR German Aerospace Center gathered and evaluated available cost data from various sources for this publication in order to yield transparent, reliable and up-to-date cost data for a set of reference parabolic trough and solar tower plants in the year 2015 [1]. Each component of the power plant is analyzed for future technical innovations and cost reduction potential based on current R&D activities, ongoing commercial developments and growth in market scale. The derived levelized cost of electricity (LCOE) for 2015 and 2025 are finally contrasted with published power purchase agreements (PPA) of the NOOR II+III power plants in Morocco. At 7.5% weighted average cost of capital (WACC) and 25 years economic life time, the levelized costs of electricity for plants with 7.5 (trough) respectively 9 (tower) full-load hours thermal storage capacity decrease from 14-15 -ct/kWh today to 9-10 -ct/kWh by 2025 for both technologies at direct normal irradiation of 2500 kWh/(m².a). The capacity factor increases from 41.1% to 44.6% for troughs and from 45.5% to 49.0% for towers. Financing conditions are a major cost driver and offer potential for further cost reduction with the maturity of the technology and low interest rates (6-7 - ct/kWh for 2% WACC at 2500 kWh/(m2.a) in 2025).

  3. Elevated HbA1c Levels Are Associated with the Blunted Autonomic Response Assessed by Heart Rate Variability during Blood Volume Reduction.

    Science.gov (United States)

    Kamakura, Miho; Maruyama, Ryoko

    2016-10-01

    A high glycemic status increases the risk for autonomic dysfunction and cardiovascular failure. The aim of this study was to investigate time-dependent changes in the autonomic response and cardiovascular dynamics and the association between the level of hemoglobin A1c (HbA1c) and autonomic response during blood volume reduction. The study population consisted of 26 preoperative participants who were scheduled for autologous blood donation (200-400 mL of whole blood) for intraoperative or postoperative use. These participants without circulatory, respiratory, or brain disease and diabetes mellitus were grouped according to their HbA1c levels: blood pressure (BP) and analyzed heart rate variability (HRV) to quantify cardiac autonomic regulation throughout blood donation. During blood volume reduction, which was about 10% of the circulating blood volume, the BP and heart rate varied within normal ranges in both groups. The high-frequency (HF) component, an index of parasympathetic nerve activity, and the ratio of low-frequency (LF) to HF components (LF/HF), an index of sympathetic nerve activity, significantly decreased and increased with the progression of blood volume reduction, respectively, in the HbA1c blood volume reduction only in the HbA1c blood volume reduction.

  4. Energy-Saving Melting and Revert Reduction Technology (E-SMARRT): Final Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    White, Thornton C [SCRA Appiled R& D

    2014-03-31

    Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) is a balanced portfolio of R&D tasks that address energy-saving opportunities in the metalcasting industry. E-SMARRT was created to: • Improve important capabilities of castings • Reduce carbon footprint of the foundry industry • Develop new job opportunities in manufacturing • Significantly reduce metalcasting process energy consumption and includes R&D in the areas of: • Improvements in Melting Efficiency • Innovative Casting Processes for Yield Improvement/Revert Reduction • Instrumentation and Control Improvement • Material properties for Casting or Tooling Design Improvement The energy savings and process improvements developed under E-SMARRT have been made possible through the unique collaborative structure of the E-SMARRT partnership. The E-SMARRT team consisted of DOE’s Office of Industrial Technology, the three leading metalcasting technical associations in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Founders’ Society of America; and SCRA Applied R&D, doing business as the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. This team provided collaborative leadership to a complex industry composed of approximately 2,000 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people. Without collaboration, these new processes and technologies that enable energy efficiencies and environment-friendly improvements would have been slow to develop and had trouble obtaining a broad application. The E-SMARRT R&D tasks featured low-threshold energy efficiency improvements that are attractive to the domestic industry because they do not require major capital investment. The results of this portfolio of projects are significantly reducing metalcasting process energy consumption while improving the important capabilities of metalcastings. Through June

  5. Final cost reduction study for the Geysers Recharge Alternative. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The purpose of this study is to determine whether or not cost reduction opportunities exist for the Geysers Recharge Alternative as defined in the Santa Rosa Subregional Long-Term Wastewater Project EIR/EIS. The City of Santa Rosa has been directed to have a plan for reclaimed water disposal in place by 1999 which will meet future capacity needs under all weather conditions. A Draft EIR/EIS released in July 1996 and a Final EIR certified in June 1997 examine four primary alternatives plus the No Action Alternative. Two of the primary alternatives involve agricultural irrigation with reclaimed water, either in western or southern Sonoma County. Another involves increased discharge of reclaimed water into the Russian River. The fourth involves using reclaimed water to replenish the geothermal reservoir at the Geysers. The addition of this water source would enable the Geysers operators to produce more steam from the geothermal area and thereby prolong the life and economic production level of the steamfield and the geothermal power plants supplied by the steamfield. This study provides additional refined cost estimates for new scenarios which utilize an alternative pipeline alignment and a range of reclaimed water flows, which deliver less water to the Geysers than proposed in the EIR/EIS (by distributing flow to other project components). Also, electrical power rates were revised to reflect the recent changes in costs associated with deregulation of the power industry. In addition, this report provides information on sources of potential public and private funding available and future environmental documentation required if the cost reduction scenarios were to be selected by the City as part of their preferred alternative.

  6. Volume reduction outweighs biogeochemical processes in controlling phosphorus treatment in aged detention systems

    Science.gov (United States)

    Shukla, Asmita; Shukla, Sanjay; Annable, Michael D.; Hodges, Alan W.

    2017-08-01

    Stormwater detention areas (SDAs) play an important role in treating end-of-the-farm runoff in phosphorous (P) limited agroecosystems. Phosphorus transport from the SDAs, including those through subsurface pathways, are not well understood. The prevailing understanding of these systems assumes that biogeochemical processes play the primary treatment role and that subsurface losses can be neglected. Water and P fluxes from a SDA located in a row-crop farm were measured for two years (2009-2011) to assess the SDA's role in reducing downstream P loads. The SDA treated 55% (497 kg) and 95% (205 kg) of the incoming load during Year 1 (Y1, 09-10) and Year 2 (Y2, 10-11), respectively. These treatment efficiencies were similar to surface water volumetric retention (49% in Y1 and 84% in Y2) and varied primarily with rainfall. Similar water volume and P retentions indicate that volume retention is the main process controlling P loads. A limited role of biogeochemical processes was supported by low to no remaining soil P adsorption capacity due to long-term drainage P input. The fact that outflow P concentrations (Y1 = 368.3 μg L- 1, Y2 = 230.4 μg L- 1) could be approximated by using a simple mixing of rainfall and drainage P input further confirmed the near inert biogeochemical processes. Subsurface P losses through groundwater were 304 kg (27% of inflow P) indicating that they are an important source for downstream P. Including subsurface P losses reduces the treatment efficiency to 35% (from 61%). The aboveground biomass in the SDA contained 42% (240 kg) of the average incoming P load suggesting that biomass harvesting could be a cost-effective alternative for reviving the role of biogeochemical processes to enhance P treatment in aged, P-saturated SDAs. The 20-year present economic value of P removal through harvesting was estimated to be 341,000, which if covered through a cost share or a payment for P treatment services program could be a positive outcome for both

  7. The potential of crowdsourcing and mobile technology to support flood disaster risk reduction

    Science.gov (United States)

    See, Linda; McCallum, Ian; Liu, Wei; Mechler, Reinhard; Keating, Adriana; Hochrainer-Stigler, Stefan; Mochizuki, Junko; Fritz, Steffen; Dugar, Sumit; Arestegui, Michael; Szoenyi, Michael; Laso-Bayas, Juan-Carlos; Burek, Peter; French, Adam; Moorthy, Inian

    2016-04-01

    The last decade has seen a rise in citizen science and crowdsourcing for carrying out a variety of tasks across a number of different fields, most notably the collection of data such as the identification of species (e.g. eBird and iNaturalist) and the classification of images (e.g. Galaxy Zoo and Geo-Wiki). Combining human computing with the proliferation of mobile technology has resulted in vast amounts of geo-located data that have considerable value across multiple domains including flood disaster risk reduction. Crowdsourcing technologies, in the form of online mapping, are now being utilized to great effect in post-disaster mapping and relief efforts, e.g. the activities of Humanitarian OpenStreetMap, complementing official channels of relief (e.g. Haiti, Nepal and New York). Disaster event monitoring efforts have been further complemented with the use of social media (e.g. twitter for earthquakes, flood monitoring, and fire detection). Much of the activity in this area has focused on ex-post emergency management while there is considerable potential for utilizing crowdsourcing and mobile technology for vulnerability assessment, early warning and to bolster resilience to flood events. This paper examines the use of crowdsourcing and mobile technology for measuring and monitoring flood hazards, exposure to floods, and vulnerability, drawing upon examples from the literature and ongoing projects on flooding and food security at IIASA.

  8. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

  9. Impact of geothermal technology improvements on royalty collections on federal lands: Volume II: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1988-10-01

    This volume contains the appendices for the ''Impact of Geothermal Technology Improvements on Royalty Collections on Federal Lands, Final Report, Volume I.'' The material in this volume supports the conclusions presented in Volume I and details each Known Geothermal Resource Area's (KGRA's) royalty estimation. Appendix A details the physical characteristics of each KGRA considered in Volume I. Appendix B supplies summary narratives on each state which has a KGRA. The information presented in Appendix C shows the geothermal power plant area proxies chosen for each KGRA considered within the report. It also provides data ranges which fit into the IMGEO model for electric energy cost estimates. Appendix D provides detailed cost information from the IMGEO model if no Geothermal Program RandD goals were completed beyond 1987 and if all the RandD goals were completed by the year 2000. This appendix gives an overall electric cost and major system costs, which add up to the overall electric cost. Appendix E supplies information for avoided cost projections for each state involved in the study that were used in the IMGEO model run to determine at what cost/kWh a 50 MWe plant could come on line. Appendix F supplies the code used in the determination of royalty income, as well as, tabled results of the royalty runs (detailed in Appendix G). The tabled results show royalty incomes, assuming a 10% discount rate, with and without RandD and with and without a $0.01/kWh transmission cost. Individual data sheets for each KGRA royalty income run are presented in Appendix G.

  10. Greenhouse Emission Reductions and Natural Gas Vehicles: A Resource Guide on Technology Options and Project Development

    Energy Technology Data Exchange (ETDEWEB)

    Orestes Anastasia; NAncy Checklick; Vivianne Couts; Julie Doherty; Jette Findsen; Laura Gehlin; Josh Radoff

    2002-09-01

    Accurate and verifiable emission reductions are a function of the degree of transparency and stringency of the protocols employed in documenting project- or program-associated emissions reductions. The purpose of this guide is to provide a background for law and policy makers, urban planners, and project developers working with the many Greenhouse Gas (GHG) emission reduction programs throughout the world to quantify and/or evaluate the GHG impacts of Natural Gas Vehicle (NGVs). In order to evaluate the GHG benefits and/or penalties of NGV projects, it is necessary to first gain a fundamental understanding of the technology employed and the operating characteristics of these vehicles, especially with regard to the manner in which they compare to similar conventional gasoline or diesel vehicles. Therefore, the first two sections of this paper explain the basic technology and functionality of NGVs, but focus on evaluating the models that are currently on the market with their similar conventional counterparts, including characteristics such as cost, performance, efficiency, environmental attributes, and range. Since the increased use of NGVs, along with Alternative Fuel Vehicle (AFVs) in general, represents a public good with many social benefits at the local, national, and global levels, NGVs often receive significant attention in the form of legislative and programmatic support. Some states mandate the use of NGVs, while others provide financial incentives to promote their procurement and use. Furthermore, Federal legislation in the form of tax incentives or procurement requirements can have a significant impact on the NGV market. In order to implement effective legislation or programs, it is vital to have an understanding of the different programs and activities that already exist so that a new project focusing on GHG emission reduction can successfully interact with and build on the experience and lessons learned of those that preceded it. Finally, most programs

  11. Intervention of gender friendly land preparation technologies for drudgery reduction of hill farm women.

    Science.gov (United States)

    Kishtwaria, Jatinder; Rana, Aruna

    2012-01-01

    Inventory of all agricultural tasks depicted land preparation by women farmers as one of the most drudgery prone task with high energy cost, thereby, making it amenable to ergonomic interventions in terms of improved technologies (clod breaker, improved plough/'danella') to relieve women from high energy demands, time spent and associated drudgery. The study was conducted in two hill states of India viz. Himachal Pradesh (35 villages and 900 representative samples) and Uttrakhand (10 villages and 900 representative samples). Experimental data were conducted on representative sub sample of 60 hill farm women of both the states to assess physiological workload and musculo-skeletal problems both while working with traditional tools along with improved tools by employing selected parameters viz. physical fitness level, physiological parameters etc. The results showed that heart rate values were more than acceptable limits for task performed with the traditional tools as compared with improved tools. Significant reduction in the heart rate was observed while working with improved tools. Analysis of MSDs showed that the postural stress and severity of pain in various body parts was reduced by adopting new technology. Hence, the use of improved land preparation tools is recommended over the existing ones for drudgery reduction.

  12. Greenhouse gas emissions reductions in Ukraine through energy efficiency policies and technologies implementation

    Energy Technology Data Exchange (ETDEWEB)

    Rapstun, M. [Agency for Rational Energy Use and Ecology, Kiev (Ukraine)

    2005-07-01

    This paper reviewed potential strategies for reducing greenhouse gas (GHG) emissions in the Ukraine as a result of the country's recent ratification of the Kyoto Protocol. The Ukraine has been identified as a key supplier to the carbon market due to the fact that many of its energy technologies need to be modernized. Key sources of greenhouse gas (GHG) emissions in the Ukraine were presented, as well as the emissions reduction potential of existing technologies in various sectors. An ENPEP model was used to examine emissions levels under different development scenarios. A summary of the main environmental and economic parameters of energy efficiency investment projects developed by ARENA-ECO were also presented. Results of the study showed that the Ukraine has the potential to supply more than 650 million tonnes of carbon dioxide (CO{sub 2}) emission reductions over the 2008-2012 Kyoto Protocol commitment period. Priority sectors included the power and heat production sector; the metallurgy industry; the natural gas industry; petroleum and petroleum refining industries; chemical and petrochemical industries; the construction industry; municipal utility services; agriculture; and transport. It was concluded that many of the proposed emissions abatement projects suggested in the paper were also cost-effective. Payback periods ranged from between 1 and 8 years, and investment requirements for the projects ranged between $4 to $20 per tonne of CO{sub 2} equivalent. 8 refs., 1 tab., 2 figs.

  13. Wah Fung Knitters Is Accredited China's Model Textile Enterprise for Energy Saving and Emissions Reduction Technology%Wah Fung Knitters Is Accredited China's Model Textile Enterprise for Energy Saving and Emissions Reduction Technology

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Wah Fung Knitters, one of the leasers of utilizing new production technology and improving production facilities to promote energy saving and environment protection in the knitting, dyeing and finishing industry, has been accredited for China's Model Textile Enterprise for Energy Saving and Emissions Reduction Technology.

  14. Novel X-ray image noise reduction technology reduces patient radiation dose while maintaining image quality in coronary angiography

    NARCIS (Netherlands)

    Cate, T.J. ten; Wely, M.H. van; Gehlmann, H.R.; Mauti, M.; Camaro, C.; Reifart, N.; Suryapranata, H.; Boer, M.J. de

    2015-01-01

    AIMS: The consequences of high radiation dose for patient and staff demand constant improvements in X-ray dose reduction technology. This study assessed non-inferiority of image quality and quantified patient dose reduction in interventional cardiology for an anatomy-specific optimised cine

  15. Reduction and Immobilization of Potassium Permanganate on Iron Oxide Catalyst by Fluidized-Bed Crystallization Technology

    Directory of Open Access Journals (Sweden)

    Guang-Xia Li

    2012-03-01

    Full Text Available A manganese immobilization technology in a fluidized-bed reactor (FBR was developed by using a waste iron oxide (i.e., BT-3 as catalyst which is a by-product from the fluidized-bed Fenton reaction (FBR-Fenton. It was found that BT-3 could easily reduce potassium permanganate (KMnO4 to MnO2. Furthermore, MnO2 could accumulate on the surface of BT-3 catalyst to form a new Fe-Mn oxide. Laboratory experiments were carried out to investigate the KMnO4-reduction mechanism, including the effect of KMnO4 concentration, BT-3 dosage, and operational solution pH. The results showed that the pH solution was a significant factor in the reduction of KMnO4. At the optimum level, pHf 6, KMnO4 was virtually reduced in 10 min. A pseudo-first order reaction was employed to describe the reduction rate of KMnO4.

  16. 2,3-Dihydroxybenzoic acid attenuates kanamycin-induced volume reduction in mouse utricular type I hair cells

    DEFF Research Database (Denmark)

    Severinsen, Stig Åvall; Kirkegaard, Mette; Nyengaard, Jens Randel

    2006-01-01

    The aminoglycoside kanamycin is a commonly used antibiotic, but unfortunately it is oto- and nephrotoxic in large doses. The negative effects are thought to be due to the formation of free radicals which is why strong antioxidants and iron chelators like 2,3-dihydroxybenzoic acid (DHB) are of great...... interest. This study estimates cellular quantitative changes in the utricular macula of mice following systemic treatment with kanamycin alone or in combination with DHB. The animals were injected with either saline, kanamycin or kanamycin+DHB for 15 days and perfusion fixed three weeks after last...... macula, hair cell type I and supporting cells decreased significantly in animals injected with kanamycin but not in animals co-treated with DHB. Hair and supporting cell numbers remained unchanged in all three groups. In conclusion, the kanamycin-induced volume reduction of type I hair cells...

  17. Bronchoscopic lung volume reduction in a single-lung transplant recipient with natal lung hyperinflation: a case report.

    Science.gov (United States)

    Pato, O; Rama, P; Allegue, M; Fernández, R; González, D; Borro, J M

    2010-06-01

    After single lung transplantation for emphysema native lung hyperinflation is a common complication that may cause respiratory failure. Herein we have reported satisfactory bronchoscopic lung volume reduction in a left single-lung transplant recipient with native lung hyperinflation, who suffered from Medical Research Council (MRC) class 3 dyspnea and chest pain. Three endobronchial valves (Zephyr; Emphasys Medical, Redwood, Calif, United States) were placed into the segmental bronchi of the right upper lobe, using videobronchoscopy under general anesthesia. Postoperative chest computed tomography revealed subsegmental atelectasis in that lobe. The clinical benefit was an improved MRC dyspnea class from 3 to 2, which was still present at 4 months after the procedure, although there were no remarkable changes in spirometric parameters.

  18. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Design Support for Tooling Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dongtao

    2011-09-23

    High pressure die casting is an intrinsically efficient net shape process and improvements in energy efficiency are strongly dependent on design and process improvements that reduce scrap rates so that more of the total consumed energy goes into acceptable, usable castings. Computer simulation has become widely used within the industry but use is not universal. Further, many key design decisions must be made before the simulation can be run and expense in terms of money and time often limits the number of decision iterations that can be explored. This work continues several years of work creating simple, very fast, design tools that can assist with the early stage design decisions so that the benefits of simulation can be maximized and, more importantly, so that the chances of first shot success are maximized. First shot success and better running processes contributes to less scrap and significantly better energy utilization by the process. This new technology was predicted to result in an average energy savings of 1.83 trillion BTUs/year over a 10 year period. Current (2011) annual energy saving estimates over a ten year period, based on commercial introduction in 2012, a market penetration of 30% by 2015 is 1.89 trillion BTUs/year by 2022. Along with these energy savings, reduction of scrap and improvement in yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2022 is 0.037 Million Metric Tons of Carbon Equivalent (MM TCE).

  19. Design of the Endobronchial Valve for Emphysema Palliation Trial (VENT: a non-surgical method of lung volume reduction

    Directory of Open Access Journals (Sweden)

    Noppen Marc

    2007-07-01

    Full Text Available Abstract Background Lung volume reduction surgery is effective at improving lung function, quality of life, and mortality in carefully selected individuals with advanced emphysema. Recently, less invasive bronchoscopic approaches have been designed to utilize these principles while avoiding the associated perioperative risks. The Endobronchial Valve for Emphysema PalliatioN Trial (VENT posits that occlusion of a single pulmonary lobe through bronchoscopically placed Zephyr® endobronchial valves will effect significant improvements in lung function and exercise tolerance with an acceptable risk profile in advanced emphysema. Methods The trial design posted on Clinical trials.gov, on August 10, 2005 proposed an enrollment of 270 subjects. Inclusion criteria included: diagnosis of emphysema with forced expiratory volume in one second (FEV1 100%; residual volume > 150% predicted, and heterogeneous emphysema defined using a quantitative chest computed tomography algorithm. Following standardized pulmonary rehabilitation, patients were randomized 2:1 to receive unilateral lobar placement of endobronchial valves plus optimal medical management or optimal medical management alone. The co-primary endpoint was the mean percent change in FEV1 and six minute walk distance at 180 days. Secondary end-points included mean percent change in St. George's Respiratory Questionnaire score and the mean absolute changes in the maximal work load measured by cycle ergometry, dyspnea (mMRC score, and total oxygen use per day. Per patient response rates in clinically significant improvement/maintenance of FEV1 and six minute walk distance and technical success rates of valve placement were recorded. Apriori response predictors based on quantitative CT and lung physiology were defined. Conclusion If endobronchial valves improve FEV1 and health status with an acceptable safety profile in advanced emphysema, they would offer a novel intervention for this progressive and

  20. Sonoporation with Acoustic Cluster Therapy (ACT®) induces transient tumour volume reduction in a subcutaneous xenograft model of pancreatic ductal adenocarcinoma.

    Science.gov (United States)

    Kotopoulis, Spiros; Stigen, Endre; Popa, Mihaela; Safont, Mireia Mayoral; Healey, Andrew; Kvåle, Svein; Sontum, Per; Gjertsen, Bjørn Tore; Gilja, Odd Helge; McCormack, Emmet

    2017-01-10

    Pancreatic ductal adenocarcinoma (PDAC) remains one of the deadliest cancers with survival averaging only 3months if untreated following diagnosis. A major limitation in effectively treating PDAC using conventional and targeted chemotherapeutic agents, is inadequate drug delivery to the target location, predominantly due to a poorly vascularised, desmoplastic tumour microenvironment. Ultrasound in combination with ultrasound contrast agents, i.e., microbubbles, that flow through the vasculature and capillaries can be used to disrupt such mechanical barriers, potentially allowing for a greater therapeutic efficacy. This phenomenon is commonly referred to as sonoporation. In an attempt to improve the efficacy of sonoporation, novel microbubble formulations are being developed to address the limitation of commercially produced clinical diagnostic ultrasound contrast agents. In our work here we evaluate the ability of a novel formulation; namely Acoustic Cluster Therapy (ACT®) to improve the therapeutic efficacy of the chemotherapeutic agent paclitaxel, longitudinally in a xenograft model of PDAC. Results indicated that ACT® bubbles alone demonstrated no observable toxic effects, whilst ACT® in combination with paclitaxel can transiently reduce tumour volumes significantly, three days posttreatment (p=0.0347-0.0458). Quantitative 3D ultrasound validated the calliper measurements. Power Doppler ultrasound imaging indicated that ACT® in combination with paclitaxel was able to transiently sustain peak vasculature percentages as observed in the initial stages of tumour development. Nevertheless, there was no significant difference in tumour vasculature percentage at the end of treatment. The high vascular percentage correlated to the transient decrease and overall inhibition of the tumour volumes. In conclusion, ACT® improves the therapeutic efficacy of paclitaxel in a PDAC xenograft model allowing for transient tumour volume reduction and sustained tumour vasculature

  1. Regulatory Risk Reduction for Advanced Reactor Technologies – FY2016 Status and Work Plan Summary

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    Millions of public and private sector dollars have been invested over recent decades to realize greater efficiency, reliability, and the inherent and passive safety offered by advanced nuclear reactor technologies. However, a major challenge in experiencing those benefits resides in the existing U.S. regulatory framework. This framework governs all commercial nuclear plant construction, operations, and safety issues and is highly large light water reactor (LWR) technology centric. The framework must be modernized to effectively deal with non-LWR advanced designs if those designs are to become part of the U.S energy supply. The U.S. Department of Energy’s (DOE) Advanced Reactor Technologies (ART) Regulatory Risk Reduction (RRR) initiative, managed by the Regulatory Affairs Department at the Idaho National Laboratory (INL), is establishing a capability that can systematically retire extraneous licensing risks associated with regulatory framework incompatibilities. This capability proposes to rely heavily on the perspectives of the affected regulated community (i.e., commercial advanced reactor designers/vendors and prospective owner/operators) yet remain tuned to assuring public safety and acceptability by regulators responsible for license issuance. The extent to which broad industry perspectives are being incorporated into the proposed framework makes this initiative unique and of potential benefit to all future domestic non-LWR applicants

  2. Technology Roadmap: Energy and GHG reductions in the chemical industry via catalytic processes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-01

    The chemical industry is a large energy user; but chemical products and technologies also are used in a wide array of energy saving and/or renewable energy applications so the industry has also an energy saving role. The chemical and petrochemical sector is by far the largest industrial energy user, accounting for roughly 10% of total worldwide final energy demand and 7% of global GHG emissions. The International Council of Chemical Associations (ICCA) has partnered with the IEA and DECHEMA (Society for Chemical Engineering and Biotechnology) to describe the path toward further improvements in energy efficiency and GHG reductions in the chemical sector. The roadmap looks at measures needed from the chemical industry, policymakers, investors and academia to press on with catalysis technology and unleash its potential around the globe. The report uncovers findings and best practice opportunities that illustrate how continuous improvements and breakthrough technology options can cut energy use and bring down greenhouse gas (GHG) emission rates. Around 90% of chemical processes involve the use of catalysts – such as added substances that increase the rate of reaction without being consumed by it – and related processes to enhance production efficiency and reduce energy use, thereby curtailing GHG emission levels. This work shows an energy savings potential approaching 13 exajoules (EJ) by 2050 – equivalent to the current annual primary energy use of Germany.

  3. Greenhouse gas emissions reduction in China by cleaner coal technology towards 2020

    DEFF Research Database (Denmark)

    Zhao, Guangling; Chen, Sha

    2015-01-01

    the complete life cycle modeling of CCTs. The advanced technologies include super-critical (super-C), ultra super-critical (USC) and integrated gasification combined cycle (IGCC). The results show that the higher efficiency technologies have lower potential impacts. Compared with the average level of power...... generation technology, CO2 emissions reduction is 6.4% for super-C, 37.4% for USC and 61.5% for IGCC. Four coal power scenarios are developed based on the assumption of potential investment power for CCTs in 2020, which are super-C, USC, USC and old low efficiency generation substitution by USC, IGCC...... and carbon capture and storage (CCS). The CO2 emissions intensity is 1.93 kg/kWh for super-C, 1.69 kg/kWh for USC, 1.59 kg/kWh for USC + replacement and 1.29 kg/kWh for IGCC + CCS. The CO2 emissions intensity was 1.95 kg/kWh in 2010, which had decreased 5.5% compared with the level in 2005. The energy...

  4. New municipal solid waste processing technology reduces volume and provides beneficial reuse applications for soil improvement and dust control

    Science.gov (United States)

    A garbage-processing technology has been developed that shreds, sterilizes, and separates inorganic and organic components of municipal solid waste. The technology not only greatly reduces waste volume, but the non-composted byproduct of this process, Fluff®, has the potential to be utilized as a s...

  5. Automated detection of masses on whole breast volume ultrasound scanner: false positive reduction using deep convolutional neural network

    Science.gov (United States)

    Hiramatsu, Yuya; Muramatsu, Chisako; Kobayashi, Hironobu; Hara, Takeshi; Fujita, Hiroshi

    2017-03-01

    Breast cancer screening with mammography and ultrasonography is expected to improve sensitivity compared with mammography alone, especially for women with dense breast. An automated breast volume scanner (ABVS) provides the operator-independent whole breast data which facilitate double reading and comparison with past exams, contralateral breast, and multimodality images. However, large volumetric data in screening practice increase radiologists' workload. Therefore, our goal is to develop a computer-aided detection scheme of breast masses in ABVS data for assisting radiologists' diagnosis and comparison with mammographic findings. In this study, false positive (FP) reduction scheme using deep convolutional neural network (DCNN) was investigated. For training DCNN, true positive and FP samples were obtained from the result of our initial mass detection scheme using the vector convergence filter. Regions of interest including the detected regions were extracted from the multiplanar reconstraction slices. We investigated methods to select effective FP samples for training the DCNN. Based on the free response receiver operating characteristic analysis, simple random sampling from the entire candidates was most effective in this study. Using DCNN, the number of FPs could be reduced by 60%, while retaining 90% of true masses. The result indicates the potential usefulness of DCNN for FP reduction in automated mass detection on ABVS images.

  6. Comparison of distinctive models for calculating an interlobar emphysema heterogeneity index in patients prior to endoscopic lung volume reduction

    Directory of Open Access Journals (Sweden)

    Theilig D

    2017-06-01

    Full Text Available Dorothea Theilig,1 Felix Doellinger,1 Alexander Poellinger,1 Vera Schreiter,1 Konrad Neumann,2 Ralf-Harto Hubner31Department of Radiology, Charité Campus Virchow Klinikum, Charité, Universitätsmedizin Berlin, Berlin, Germany; 2Institute of Biometrics and Clinical Epidemiology, Charité Campus Benjamin Franklin, Charité, Universitätsmedizin Berlin, Berlin, Germany; 3Department of Pneumology, Charité Campus Virchow Klinikum, Charité, Universitätsmedizin Berlin, Berlin, GermanyBackground: The degree of interlobar emphysema heterogeneity is thought to play an important role in the outcome of endoscopic lung volume reduction (ELVR therapy of patients with advanced COPD. There are multiple ways one could possibly define interlobar emphysema heterogeneity, and there is no standardized definition.Purpose: The aim of this study was to derive a formula for calculating an interlobar emphysema heterogeneity index (HI when evaluating a patient for ELVR. Furthermore, an attempt was made to identify a threshold for relevant interlobar emphysema heterogeneity with regard to ELVR.Patients and methods: We retrospectively analyzed 50 patients who had undergone technically successful ELVR with placement of one-way valves at our institution and had received lung function tests and computed tomography scans before and after treatment. Predictive accuracy of the different methods for HI calculation was assessed with receiver-operating characteristic curve analysis, assuming a minimum difference in forced expiratory volume in 1 second of 100 mL to indicate a clinically important change.Results: The HI defined as emphysema score of the targeted lobe (TL minus emphysema score of the ipsilateral nontargeted lobe disregarding the middle lobe yielded the best predicative accuracy (AUC =0.73, P=0.008. The HI defined as emphysema score of the TL minus emphysema score of the lung without the TL showed a similarly good predictive accuracy (AUC =0.72, P=0.009. Subgroup

  7. Effectiveness of bronchoscopic lung volume reduction using unilateral endobronchial valve: a systematic review and meta-analysis

    Directory of Open Access Journals (Sweden)

    Choi M

    2015-03-01

    Full Text Available Miyoung Choi,1 Worl Suk Lee,1 Min Lee,1 Kyeongman Jeon,2 Seungsoo Sheen,3 Sanghoon Jheon,4 Young Sam Kim5 1National Evidence-Based Healthcare Collaborating Agency, Seoul, Republic of Korea; 2Division of Pulmonary and Critical Care Medicine, Department of Medicine, Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul, Republic of Korea; 3Department of Pulmonary and Critical Care Medicine, Ajou University School of Medicine, Suwon, Republic of Korea; 4Department of Thoracic and Cardiovascular Surgery, Seoul National University Bundang Hospital, Seoul National University College of Medicine, Seoul, Republic of Korea; 5Department of Internal Medicine, Severance Hospital, Yonsei University College of Medicine, Seoul, Republic of Korea Background: Bronchoscopic lung volume reduction (BLVR can be suggested as an alternative for surgical lung volume reduction surgery for severe emphysema patients. This article intends to evaluate by systematic review the safety and effectiveness of BLVR using a one-way endobronchial valve.Methods: A systematic search of electronic databases, including MEDLINE, EMBASE, and the Cochrane Library, as well as eight domestic databases up to December 2013, was performed. Two reviewers independently screened all references according to selection criteria. The Scottish Intercollegiate Guidelines Network criterion was used to assess quality of literature. Data from randomized controlled trials were combined and meta-analysis was performed. Results: This review included 15 studies. Forced expiratory volume in 1 second (FEV1 improved in the intervention group compared with the control group (mean difference [MD]=6.71, 95% confidence interval [CI]: 3.31–10.11. Six-minute walking distance (MD=15.66, 95% CI: 1.69–29.64 and cycle workload (MD=4.43, 95% CI: 1.80–7.07 also improved. In addition, St George’s Respiratory Questionnaire score decreased (MD=4.29, 95% CI: -6.87 to -1.71 in the intervention group

  8. CT scanning: technological aspects and radiation dose reduction;Tomodensitometrie: aspects technologiques et reduction de la dose

    Energy Technology Data Exchange (ETDEWEB)

    Kerviler, E. de [Assistance Publique - Hopitaux de Paris, Saint Louis, 75 - Paris (France)

    2009-10-15

    The proliferation of CT examinations necessitates the use of indicators of standard dose and reference levels. The dose.length product calculated from the computed tomography dose index (C.T.D.I.) is available on every recent machine and must appeared in the radiological report. Several techniques easily accessible to the console as the dose modulation, allow to reduce the dose to the patient. The combined use of these techniques allows dose reductions of more than 50%. The most important dose reductions are got in the organs with a strong contrast (lungs, sinus of the face). (N.C.)

  9. The Defense Science Board 1999 Summer Study Task Force on 21st Century Defense Technology Strategies. Volume 1

    Science.gov (United States)

    2016-06-07

    Study Task Force On 21ST Century Defense Technology Strategies Volume 1 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR...3. Defense Technology Strategy and Management PART 4. Strategic Agility PART 5. Analysis and Quantitative Results iii PREFACE The Defense Science...Board (DSB) 1999 Summer Study Task Force on 21st Century Defense Technology Strategies continues a series of studies that have examined key challenges

  10. A new algorithm of inverse lithography technology for mask complexity reduction

    Institute of Scientific and Technical Information of China (English)

    Li Yanghuan; Shi Zheng; Geng Zhen; Yang Yiwei; Yan Xiaolang

    2012-01-01

    A new complexity penalty term called the global wavelet penalty is introduced,which evaluates the high-frequency components of masks more profoundly by applying four distinctive Haar wavelet transforms and choosing the optimal direction on which the highest frequency components of the mask will be removed.Then,a new gradient-based inverse lithography technology (ILT) algorithm is proposed,with the computation of the global wavelet penalty as the emphasis of its first phase for mask complexity reduction.Experiments with three typical 65 nm flash ROM patterns under existing 90 nm lithographic conditions show that compared with the gradientbased algorithm,which relies on the so-called local wavelet penalty,the total vertices of the three results created by the proposed algorithm can be reduced by 12.89%,12.63% and 12.64%,respectively,while the accuracy of the lithography results remains the same.

  11. Development of coal mine methane concentration technology for reduction of greenhouse gas emissions

    Institute of Scientific and Technical Information of China (English)

    Takahisa; UTAKI

    2010-01-01

    In coal mines in such countries as China and Russia,most of the coal mine methane(CMM) generated during mining is emitted to the atmosphere without any effective usage,because the methane concentration of CMM is relatively low and not allowed to be used as fuel for safety reasons.Methane is one of the greenhouse gases.Therefore,if it becomes possible to concentrate CMM to an acceptable level for use as fuel,this will greatly contribute to reduction of greenhouse gas emissions.With the aim of gaining approval as a greenhouse gas emission reduction of the clean development mechanism(CDM) or joint implementation(JI) project,we developed a CMM concentration system to apply the vacuum pressure swing adsorption(VPSA) technology using a high methane-selective adsorbent by Osaka Gas Co.,Ltd.The pilot-scale plant of a CMM concentration system was installed in a coal mine in Fuxin City in the northeastern China and a demonstration test was commenced in December 2008.As the result,the pilot-scale plant successfully concentrated the raw material gas with a methane concentration of 21% and a flow rate of 1000 Nm3/h to 48%,which exceeded the target of the methane concentration performance(a 25% increase).The methane recovery rate reached 93%.

  12. A Close Analysis of Developments in Diesel Engine Emission Reduction Technologies

    Directory of Open Access Journals (Sweden)

    Raghav Ahuja

    2013-06-01

    Full Text Available Diesel engines have the potential to significantly increase vehicle fuel economy and decrease CO 2 emissions; however, efficient removal of NO x and particulate matter from the engine exhaust is required to meet stringent emission standards. Diesel aftertreatment systems being used consists of a Diesel Oxidation Catalyst (DOC, a urea-based Selective Catalyst Reduction (SCR catalyst and a diesel particulate filter (DPF, and is widely used to meet the most recent NO x (nitrogen oxides comprising NO and NO 2 and particulate matter (PM emission standards for medium and heavy-duty sport utility and truck vehicles. The most efficient way and the best available technology (BAT to radically reduce the critical Diesel emission components particles (PM&NP and nitric oxides (NO x are combined exhaust gas aftertreatment systems (DPF+SCR. SCR (selective catalytic reduction is regarded as the most efficient deNO x -system, diesel particle filters are most efficient for soot abatement. Today, several suppliers offer combined systems for retrofitting of HD vehicles.

  13. Greenhouse gas emissions reduction in China by cleaner coal technology towards 2020

    DEFF Research Database (Denmark)

    Zhao, Guangling; Chen, Sha

    2015-01-01

    The Chinese energy system, a major CO2 emitter, relies heavily on fossil fuels, especially coal. Coal will continue to play a major role in the new installed power generation capacity in the future, which will cause unavoidable environmental problems. Clean coal technologies (CCTs) are essential...... generation technology, CO2 emissions reduction is 6.4% for super-C, 37.4% for USC and 61.5% for IGCC. Four coal power scenarios are developed based on the assumption of potential investment power for CCTs in 2020, which are super-C, USC, USC and old low efficiency generation substitution by USC, IGCC...... and carbon capture and storage (CCS). The CO2 emissions intensity is 1.93 kg/kWh for super-C, 1.69 kg/kWh for USC, 1.59 kg/kWh for USC + replacement and 1.29 kg/kWh for IGCC + CCS. The CO2 emissions intensity was 1.95 kg/kWh in 2010, which had decreased 5.5% compared with the level in 2005. The energy...

  14. Reduction of Driver Stress Using AmI Technology while Driving in Motorway Merging Sections

    Science.gov (United States)

    Zia, Kashif; Riener, Andreas; Ferscha, Alois

    High average intensity of traffic and problems like traffic congestions, road safety, etc. are challenging problems striking highway operators in these days. With the broad application of intelligent transport systems (ITS), particularly for the most dense street sections, some of these problems can be minimized or even solved; supplementary great potential is attributed to applications based on state-of-the art technology like car-to-x communication, for instance by extending an individuals "field of vision" by observations taken from all the vehicles in front. In this work we present a simulation based approach for improving driving experience and increasing road safety in merging sections by redirecting vehicles in advance according to a negotiation of requirements and desires of the flowing traffic on the main road and cars merging from the entrance lane. The simulation experiments performed in a cellular automaton based environment were data driven and on real scale, using traffic flow data on a minute-by-minute basis from a large urban motorway in a main city of the European Union. Our results have shown that the application of AmI technology has potential to influence driver's behavior (seamlessly invoking for a lane change well before an abrupt merging point) resulting in a reduction of panic, particularly for sections with limited range of view.

  15. Proceedings of The Twentieth International Symposium on Space Technology and Science. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-31

    The 20th international symposium on space technology and science was held in Nagaragawa city, Gifu prefecture on May 19-25, 1996, and 401 papers were made public. Out of those, 112 papers were summed up as Volume 2 following the previous Volume 1. As to space transportation, the paper included reports titled as follows: Conceptual study of H-IIA rocket (upgraded H-II rocket); Test flight of the launch vehicle; International cooperation in space transportation; etc. Concerning microgravity science, Recent advances in microgravity research; Use of microgravity environment to investigate the effect of magnetic field on flame shape; etc. Relating to satellite communications and broadcasting, `Project GENESYS`: CRL`s R and D project for realizing high data rate satellite communications networks; The Astrolink {sup TM/SM} system; etc. Besides, the paper contained reports on the following fields: lunar and planetary missions and utilization, space science and balloons, earth observations, life science and human presence, international cooperation and space environment, etc

  16. Technology priorities for transport in Asia: assessment of economy-wide CO2 emissions reduction for Lebanon

    DEFF Research Database (Denmark)

    Dhar, Subash; Marpaung, Charles O. P.

    2015-01-01

    This paper analyses the technology choices of countries that prioritized transport as a sector in Asia under the Technology Needs Assessment project. The countries used a wide variety of criteria to prioritize technologies which were related to the benefits technologies would provide, costs...... mitigations actions (NAMA) given their strong contribution for development and therefore a methodology based on in-put out-put decomposition analysis is proposed for analysing economy wide CO2 emissions reductions. The methodology has been applied for the transport sector of Lebanon where alternative fuels...

  17. Analysis of Orbital Volume Measurements Following Reduction and Internal Fixation Using Absorbable Mesh Plates and Screws for Patients With Orbital Floor Blowout Fractures.

    Science.gov (United States)

    Hwang, Won Joo; Lee, Do Heon; Choi, Won; Hwang, Jae Ha; Kim, Kwang Seog; Lee, Sam Yong

    2017-08-22

    Hinge-shaped fractures are common type of orbital floor blowout fractures, for which reduction and internal fixation is ideal. Nonetheless, orbital floor reconstruction using alloplastic materials without reducing the number of bone fragments is the most frequently used procedure. Therefore, this study analyzed and compared the outcomes between open reduction and internal fixation using absorbable mesh plates and screws, and orbital floor reconstruction, by measuring the orbital volume before and after surgery. Among patients with orbital floor blowout fractures, this study was conducted on 28 patients who underwent open reduction and internal fixation, and 27 patients who underwent orbital floor reconstruction from December 2008 to September 2015. The mechanism of injury, ophthalmic symptoms before and after surgery, and the degree of enophthalmos were examined; subsequently, the volumes of the affected and unaffected sides were measured before and after surgery based on computed tomography images. This study compared the degree of recovery in the correction rate of the orbital volume, ophthalmic symptoms, and enophthalmos between the 2 groups. The patients who underwent open reduction and internal fixation, and the patients who underwent orbital floor reconstruction showed average correction rates of 100.36% and 105.24%, respectively. Open reduction and internal fixation showed statistically, significantly superior treatment outcomes compared with orbital floor reconstruction. The ophthalmic symptoms and incidence of enophthalmos completely resolved in both groups. For orbital floor blowout fractures, open reduction and internal fixation using absorbable mesh plates and screws was a feasible alternative to orbital floor reconstruction.

  18. CO{sub 2} reduction consensus?. A conceptual framework for global CO{sub 2} reduction targets: The importance of energy technology development

    Energy Technology Data Exchange (ETDEWEB)

    Okken, P.A.

    1991-12-01

    This paper starts with the Intergovernmental Panel on Climate Change, Science Group`s recommendation to reduce global fossil fuel CO{sub 2} emissions by 60% at least. This recommendation is considered to be the result of a utilitarian consensus process, which takes into account the current knowledge about CO{sub 2} reduction costs in national energy systems, and the scientific uncertainties in global climate change assessments. A conceptual framework for this consensus reaching process is constructed, and various arguments and issues are discussed, leading to higher or lower CO{sub 2} reduction percentages. One of these arguments is that with new energy technologies more than 60% CO{sub 2} reduction is possible. This is illustrated for the transport sector and coal power generation (together contributing 45% to current global emissions). Although CO{sub 2} reduction in these sectors is generally thought to be very difficult, yet new energy technologies are available to drastically reduce emissions, cost-effective in the range of 25 to 100$/tCO{sub 2} reduced. 11 figs., 6 tabs., 14 refs.

  19. Defectivity and particle reduction for mask life extension, and imprint mask replication for high-volume semiconductor manufacturing

    Science.gov (United States)

    Emoto, Keiji; Sakai, Fumio; Sato, Chiaki; Takabayashi, Yukio; Nakano, Hitoshi; Takabayashi, Tsuneo; Yamamoto, Kiyohito; Hattori, Tadashi; Hiura, Mitsuru; Ando, Toshiaki; Kawanobe, Yoshio; Azuma, Hisanobu; Iwanaga, Takehiko; Choi, Jin; Aghili, Ali; Jones, Chris; Irving, J. W.; Fletcher, Brian; Ye, Zhengmao

    2016-03-01

    Imprint lithography has been shown to be an effective technique for replication of nano-scale features. Jet and Flash* Imprint Lithography (J-FIL*) involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. Criteria specific to any lithographic process for the semiconductor industry include overlay, throughput and defectivity. The purpose of this paper is to describe the technology advancements made in the reduction of particle adders in an imprint tool and introduce the new mask replication tool that will enable the fabrication of replica masks with added residual image placement errors suitable for memory devices with half pitches smaller than 15nm. Hard particles on a wafer or mask create the possibility of creating a permanent defect on the mask that can impact device yield and mask life. By using material methods to reduce particle shedding and by introducing an air curtain system, test stand results demonstrate the potential for extending mask life to better than 1000 wafers. Additionally, a new replication tool, the FPA-1100 NR2 is introduced. Mask chuck flatness simulation results were also performed and demonstrate that residual image placement errors can be reduced to as little as 1nm.

  20. Multi-parallel open technology to enable collaborative volume visualization: how to create global immersive virtual anatomy classrooms.

    Science.gov (United States)

    Silverstein, Jonathan C; Walsh, Colin; Dech, Fred; Olson, Eric; E, Michael; Parsad, Nigel; Stevens, Rick

    2008-01-01

    Many prototype projects aspire to develop a sustainable model of immersive radiological volume visualization for virtual anatomic education. Some have focused on distributed or parallel architectures. However, very few, if any others, have combined multi-location, multi-directional, multi-stream sharing of video, audio, desktop applications, and parallel stereo volume rendering, to converge on an open, globally scalable, and inexpensive collaborative architecture and implementation method for anatomic teaching using radiological volumes. We have focused our efforts on bringing this all together for several years. We outline here the technology we're making available to the open source community and a system implementation suggestion for how to create global immersive virtual anatomy classrooms. With the releases of Access Grid 3.1 and our parallel stereo volume rendering code, inexpensive globally scalable technology is available to enable collaborative volume visualization upon an award-winning framework. Based upon these technologies, immersive virtual anatomy classrooms that share educational or clinical principles can be constructed with the setup described with moderate technological expertise and global scalability.

  1. Sodium intake in US ethnic subgroups and potential impact of a new sodium reduction technology: NHANES Dietary Modeling

    OpenAIRE

    Fulgoni, Victor L.; Agarwal, Sanjiv; Spence, Lisa; Samuel, Priscilla

    2014-01-01

    Background Because excessive dietary sodium intake is a major contributor to hypertension, a reduction in dietary sodium has been recommended for the US population. Using the National Health and Nutrition Examination Survey (NHANES) 2007–2010 data, we estimated current sodium intake in US population ethnic subgroups and modeled the potential impact of a new sodium reduction technology on sodium intake. Methods NHANES 2007–2010 data were analyzed using The National Cancer Institute method to e...

  2. Estimating CO{sub 2} Emission Reduction of Non-capture CO{sub 2} Utilization (NCCU) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo [KEPCO Research Institute, Daejon (Korea, Republic of); Choi, Jong Shin [Korea East-West Power Co., LTD(ETP), Ulsan (Korea, Republic of)

    2015-10-15

    Estimating potential of CO{sub 2} emission reduction of non-capture CO{sub 2} utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue gas. For the estimating the CO{sub 2} emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO{sub 2} of 100 tons per day was performed, Also for the estimation of the indirect CO{sub 2} reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO{sub 2} emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO{sub 3} (7.4 GJ/tNaHCO{sub 3}). While for the NCCU technology, the direct CO{sub 2} reduction through the CO{sub 2} carbonation was estimated as 36,500 ton per year and the indirect CO{sub 2} reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue was energy efficient and could be one of the promising technology for the low CO{sub 2} emission technology.

  3. Definition of 1992 Technology Aircraft Noise Levels and the Methodology for Assessing Airplane Noise Impact of Component Noise Reduction Concepts

    Science.gov (United States)

    Kumasaka, Henry A.; Martinez, Michael M.; Weir, Donald S.

    1996-01-01

    This report describes the methodology for assessing the impact of component noise reduction on total airplane system noise. The methodology is intended to be applied to the results of individual study elements of the NASA-Advanced Subsonic Technology (AST) Noise Reduction Program, which will address the development of noise reduction concepts for specific components. Program progress will be assessed in terms of noise reduction achieved, relative to baseline levels representative of 1992 technology airplane/engine design and performance. In this report, the 1992 technology reference levels are defined for assessment models based on four airplane sizes - an average business jet and three commercial transports: a small twin, a medium sized twin, and a large quad. Study results indicate that component changes defined as program final goals for nacelle treatment and engine/airframe source noise reduction would achieve from 6-7 EPNdB reduction of total airplane noise at FAR 36 Stage 3 noise certification conditions for all of the airplane noise assessment models.

  4. Solar/hydrogen systems technologies. Volume II (Part 1 of 2). Solar/hydrogen systems assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Escher, W. J.D.; Foster, R. W.; Tison, R. R.; Hanson, J. A.

    1980-06-02

    Volume II of the Solar/Hydrogen Systems Assessment contract report (2 volumes) is basically a technological source book. Relying heavily on expert contributions, it comprehensively reviews constituent technologies from which can be assembled a wide range of specific solar/hydrogen systems. Covered here are both direct and indirect solar energy conversion technologies; respectively, those that utilize solar radiant energy input directly and immediately, and those that absorb energy from a physical intermediary, previously energized by the sun. Solar-operated hydrogen energy production technologies are also covered in the report. The single most prominent of these is water electrolysis. Utilization of solar-produced hydrogen is outside the scope of the volume. However, the important hydrogen delivery step is treated under the delivery sub-steps of hydrogen transmission, distribution and storage. An exemplary use of the presented information is in the synthesis and analysis of those solar/hydrogen system candidates documented in the report's Volume I. Morever, it is intended that broad use be made of this technology information in the implementation of future solar/hydrogen systems. Such systems, configured on either a distributed or a central-plant basis, or both, may well be of major significance in effecting an ultimate transition to renewable energy systems.

  5. Solar/hydrogen systems technologies. Volume II (Part 2 of 2). Solar/hydrogen systems assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Escher, W. J.D.; Foster, R. W.; Tison, R. R.; Hanson, J. A.

    1980-06-02

    Volume II of the Solar/Hydrogen Systems Assessment contract report (2 volumes) is basically a technological source book. Relying heavily on expert contributions, it comprehensively reviews constituent technologies from which can be assembled a wide range of specific solar/hydrogen systems. Covered here are both direct and indirect solar energy conversion technologies; respectively, those that utilize solar radiant energy input directly and immediately, and those that absorb energy from a physical intermediary, previously energized by the sun. Solar-operated hydrogen energy production technologies are also covered in the report. The single most prominent of these is water electrolysis. Utilization of solar-produced hydrogen is outside the scope of the volume. However, the important hydrogen delivery step is treated under the delivery sub-steps of hydrogen transmission, distribution and storage. An exemplary use of the presented information is in the synthesis and analysis of those solar/hydrogen system candidates documented in the report's Volume I. Moreover, it is intended that broad use be made of this technology information in the implementation of future solar/hydrogen systems. Such systems, configured on either a distributed or a central-plant basis, or both, may well be a major significance in effecting an ultimate transition to renewable energy systems.

  6. CONSUMPTION VOLUMES TECHNOLOGY OF ELECTRICITY AND HEAT BY DEPARTMENTS OF THE UNIVERSITY

    Directory of Open Access Journals (Sweden)

    O. M. Pshinko

    2015-01-01

    Full Text Available Purpose. Efficient use of natural energy resources is one of the priorities of the state policy in the sphere of universities and institutions of the Ministry of Education and Science of Ukraine. Besides search and development the new efficient and clean energy systems it is necessary to implement optimal management of the development and operation of existing facilities, reducing their energy costs. Purpose of this work is to develop consumption volume technology of electricity and heat by scientific departments of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan (DNURT for further finding the ways to reduce energy consumption. The problem is due to the specifics of University’s energy scheme. There is a difficulty for the installation of energy meters and data acquisition about their use in individual branches and structural units. At the same time it is impossible to assess qualitatively the energy position of scientific departments. Methodology. The method to determine the electricity and heat consumption for space heating of scientific departments at the university is based on «The intersectoral rules of electricity and heat energy for institutions and public sector organizations in Ukraine» and «Codes and regulations on rationing of fuel and heat energy for heating the residential buildings as well as for economic needs in Ukraine». Findings. Developed determining expenditure technology of electricity and heat for heating by scientific departments at the DNURT named after Academician V. Lazaryan allows obtaining data on energy consumption in individual units without direct measure and analyzing the effectiveness of energy saving technologies. Originality. It is represented by energy costs in the form of two components and these components are defined on the basis of the energy audit. This enables the energy inputs to implement energy efficiency measures in the research departments of the

  7. Low-level radioactive waste from commercial nuclear reactors. Volume 2. Treatment, storage, disposal, and transportation technologies and constraints

    Energy Technology Data Exchange (ETDEWEB)

    Jolley, R.L.; Dole, L.R.; Godbee, H.W.; Kibbey, A.H.; Oyen, L.C.; Robinson, S.M.; Rodgers, B.R.; Tucker, R.F. Jr.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 2 discusses the definition, forms, and sources of LLRW; regulatory constraints affecting treatment, storage, transportation, and disposal; current technologies used for treatment, packaging, storage, transportation, and disposal; and the development of a matrix relating treatment technology to the LLRW stream as an aid for choosing methods for treating the waste. Detailed discussions are presented for most LLRW treatment methods, such as aqueous processes (e.g., filtration, ion exchange); dewatering (e.g., evaporation, centrifugation); sorting/segregation; mechanical treatment (e.g., shredding, baling, compaction); thermal processes (e.g., incineration, vitrification); solidification (e.g., cement, asphalt); and biological treatment.

  8. Assessment of Technology Readiness Level of a Carbon Dioxide Reduction Assembly (CRA) for use on International Space Station

    Science.gov (United States)

    Murdoch, Karen; Smith, Fred; Perry, Jay; Green, Steve

    2004-01-01

    When technologies are traded for incorporation into vehicle systems to support a specific mission scenario, they are often assessed in terms of Technology Readiness Level (TRL). TRL is based on three major categories of Core Technology Components, Ancillary Hardware and System Maturity, and Control and Control Integration. This paper describes the Technology Readiness Level assessment of the Carbon Dioxide Reduction Assembly (CRA) for use on the International Space Station. A team comprising of the NASA Johnson Space Center, Marshall Space Flight Center, Southwest Research Institute and Hamilton Sundstrand Space Systems International have been working on various aspects of the CRA to bring its TRL from 4/5 up to 6. This paper describes the work currently being done in the three major categories. Specific details are given on technology development of the Core Technology Components including the reactor, phase separator and CO2 compressor.

  9. Aircraft noise reduction technology. [to show impact on individuals and communities, component noise sources, and operational procedures to reduce impact

    Science.gov (United States)

    1973-01-01

    Aircraft and airport noise reduction technology programs conducted by NASA are presented. The subjects discussed are: (1) effects of aircraft noise on individuals and communities, (2) status of aircraft source noise technology, (3) operational procedures to reduce the impact of aircraft noise, and (4) NASA relations with military services in aircraft noise problems. References to more detailed technical literature on the subjects discussed are included.

  10. Technology transfer for the US Department of Energy's Energy Storage Program: Volume 2, Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Bruneau, C.L.; Fassbender, L.L.

    1988-10-01

    This document contains the appendices to Technology Transfer Recommendations for the US Department of Energy's Storage Program (PNL-6484, Vol. 1). These appendices are a list of projects, publications, and presentations connected with the Energy Storage (STOR) program. In Volume 1, the technology transfer activities of the STOR program are examined and mechanisms for increasing the effectiveness of those activities are recommended.

  11. Effect of Two Advanced Noise Reduction Technologies on the Aerodynamic Performance of an Ultra High Bypass Ratio Fan

    Science.gov (United States)

    Hughes, Christoper E.; Gazzaniga, John A.

    2013-01-01

    A wind tunnel experiment was conducted in the NASA Glenn Research Center anechoic 9- by 15-Foot Low-Speed Wind Tunnel to investigate two new advanced noise reduction technologies in support of the NASA Fundamental Aeronautics Program Subsonic Fixed Wing Project. The goal of the experiment was to demonstrate the noise reduction potential and effect on fan model performance of the two noise reduction technologies in a scale model Ultra-High Bypass turbofan at simulated takeoff and approach aircraft flight speeds. The two novel noise reduction technologies are called Over-the-Rotor acoustic treatment and Soft Vanes. Both technologies were aimed at modifying the local noise source mechanisms of the fan tip vortex/fan case interaction and the rotor wake-stator interaction. For the Over-the-Rotor acoustic treatment, two noise reduction configurations were investigated. The results showed that the two noise reduction technologies, Over-the-Rotor and Soft Vanes, were able to reduce the noise level of the fan model, but the Over-the-Rotor configurations had a significant negative impact on the fan aerodynamic performance; the loss in fan aerodynamic efficiency was between 2.75 to 8.75 percent, depending on configuration, compared to the conventional solid baseline fan case rubstrip also tested. Performance results with the Soft Vanes showed that there was no measurable change in the corrected fan thrust and a 1.8 percent loss in corrected stator vane thrust, which resulted in a total net thrust loss of approximately 0.5 percent compared with the baseline reference stator vane set.

  12. 2014 U.S. Offshore Wind Market Report: Industry Trends, Technology Advancement, and Cost Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Aaron; Stehly, Tyler; Walter Musial

    2015-09-29

    2015 has been an exciting year for the U.S. offshore wind market. After more than 15 years of development work, the U.S. has finally hit a crucial milestone; Deepwater Wind began construction on the 30 MW Block Island Wind Farm (BIWF) in April. A number of other promising projects, however, have run into economic, legal, and political headwinds, generating much speculation about the future of the industry. This slow, and somewhat painful, start to the industry is not without precedent; each country in northern Europe began with pilot-scale, proof-of-concept projects before eventually moving to larger commercial scale installations. Now, after more than a decade of commercial experience, the European industry is set to achieve a new deployment record, with more than 4 GW expected to be commissioned in 2015, with demonstrable progress towards industry-wide cost reduction goals. DWW is leveraging 25 years of European deployment experience; the BIWF combines state-of-the-art technologies such as the Alstom 6 MW turbine with U.S. fabrication and installation competencies. The successful deployment of the BIWF will provide a concrete showcase that will illustrate the potential of offshore wind to contribute to state, regional, and federal goals for clean, reliable power and lasting economic development. It is expected that this initial project will launch the U.S. industry into a phase of commercial development that will position offshore wind to contribute significantly to the electric systems in coastal states by 2030.

  13. Intelligent background noise reduction technology in cable fault locator using the magneto-acoustic synchronous method

    Science.gov (United States)

    Mi, JianWei; Huang, JiFa; Fang, XiaoLi; Fan, LiBin

    2017-01-01

    The magneto-acoustic synchronous method has found wide application in accurate positioning of power cable fault due to its advantages of high accuracy and strong ability to reject interference. In the view of principle, the magneto-acoustic synchronous method needs to detect the discharge sound signal and electromagnetic signal emitted from the fault point, but the discharge sound signal is easy to be interfered by the ambient noise around and the magnetic sound synchronization. Therefore, it is challenging to quickly and accurately detect the fault location of cable especially in strong background noise environment. On the other hand, the spectral subtraction is a relatively traditional and effective method in many intelligent background noise reduction technologies, which is characterized by a relatively small computational cost and strong real-time performance. However, its application is limited because the algorithm displays poor performance in low Signal to Noise Ratio (SNR) environment. Aiming at the shortcoming of the spectral subtraction that de-noising effect is weak in low SNR environment, this paper proposes an improved spectral subtraction combining the magnetic sound synchronous principle and analyzing the properties of discharging sound. This method can accurately estimate noise in real time and optimize the performance of the basic spectral subtraction thus solving the problem that the magneto-acoustic synchronous method is unsatisfactory for positioning cable fault in the strong background noise environment.

  14. Effect of Mirasol pathogen reduction technology system on in vitro quality of MCS+ apheresis platelets.

    Science.gov (United States)

    Mastroianni, Maria Adele; Llohn, Abid Hussain; Akkök, Çiğdem Akalın; Skogheim, Ruby; Ødegaard, Elna Rathe; Nybruket, Monica Jenssen; Flesland, Annika; Mousavi, Seyed Ali

    2013-10-01

    Reducing the risk of pathogen transmission to transfusion recipients is one of the great concerns in transfusion medicine. Important among the measures suggested to minimise pathogen transmission is pathogen reduction technology (PRT) systems. The present study examined the effects of Mirasol PRT system on MCS+ apheresis platelets in vitro quality measures during a seven-day storage period at 22°C. Statistical analysis indicated no significant difference in platelet concentrations between the control and treated platelet concentrates (PCs) during the storage period. Glucose and lactate levels were measured to determine metabolic activities of control and treated platelets. In both control and treated platelets, the amount of glucose consumed and lactate produced increased significantly with storage time, but glucose consumption and lactate production rates were significantly higher in treated platelets compared with control platelets. The mean pH of treated PCs was decreased at all time points relative to control PCs but remained within acceptable limits. The expression of P-selectin was also higher in Mirasol PRT treated platelets throughout the storage period, but differences were not statistically significant on Days 1 and 4. Finally, visual inspection of swirling indicated that Mirasol PRT treatment of platelets is associated with platelet shape change. Overall, our results show that MCS+ apheresis platelets treated with Mirasol PRT can preserve adequate in vitro properties for at least 5 days of storage.

  15. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Mechanical Performance of Dies

    Energy Technology Data Exchange (ETDEWEB)

    R. Allen Miller, Principal Investigator; Kabiri-Bamoradian, Contributors: Khalil; Delgado-Garza, Abelardo; Murugesan, Karthik; Ragab, Adham

    2011-09-13

    provided to NADCA for distribution to the industry. Power law based meta-models for predicting machine tie bar loading and for predicting maximum parting surface separation were successfully developed and tested against simulation results for a wide range of machines and experimental data. The models proved to be remarkably accurate, certainly well within the requirements for practical application. In addition to making die structural modeling more accessible, the work advanced the state-of-the-art by developing improved modeling of cavity pressure effects, which is typically modeled as a hydrostatic boundary condition, and performing a systematic analysis of the influence of ejector die design variables on die deflection and parting plane separation. This cavity pressure modeling objective met with less than complete success due to the limits of current finite element based fluid structure interaction analysis methods, but an improved representation of the casting/die interface was accomplished using a combination of solid and shell elements in the finite element model. This approximation enabled good prediction of final part distortion verified with a comprehensive evaluation of the dimensions of test castings produced with a design experiment. An extra deliverable of the experimental work was development of high temperature mechanical properties for the A380 die casting alloy. The ejector side design objective was met and the results were incorporated into the metamodels described above. This new technology was predicted to result in an average energy savings of 2.03 trillion BTU's/year over a 10 year period. Current (2011) annual energy saving estimates over a ten year period, based on commercial introduction in 2009, a market penetration of 70% by 2014 is 4.26 trillion BTU's/year by 2019. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting

  16. Environmental Technology Verification Test Report of Mobile Source Selective Catalytic Reduction, Johnson Matthey SCCRT, Version 1, Selective Catalytic Reduction Technology with a Catalyzed Continuously Regenerating Trap

    Science.gov (United States)

    The Johnson Matthey SCCRT, v.1 technology is a urea-based SCR system combined with a CCRT filter designed for on-highway light, medium, and heavy heavy-duty diesel, urban and non-urban, bus exhaust gas recirculation (EGR)-or non-EGR-equipped engines for use with commercial ultra-...

  17. The Impact of Homogeneous Versus Heterogeneous Emphysema on Dynamic Hyperinflation in Patients With Severe COPD Assessed for Lung Volume Reduction.

    Science.gov (United States)

    Boutou, Afroditi K; Zoumot, Zaid; Nair, Arjun; Davey, Claire; Hansell, David M; Jamurtas, Athanasios; Polkey, Michael I; Hopkinson, Nicholas S

    2015-01-01

    Dynamic hyperinflation (DH) is a pathophysiologic hallmark of Chronic Obstructive Pulmonary Disease (COPD). The aim of this study was to investigate the impact of emphysema distribution on DH during a maximal cardiopulmonary exercise test (CPET) in patients with severe COPD. This was a retrospective analysis of prospectively collected data among severe COPD patients who underwent thoracic high-resolution computed tomography, full lung function measurements and maximal CPET with inspiratory manouvers as assessment for a lung volume reduction procedure. ΔIC was calculated by subtracting the end-exercise inspiratory capacity (eIC) from resting IC (rIC) and expressed as a percentage of rIC (ΔIC%). Emphysema quantification was conducted at 3 predefined levels using the syngo PULMO-CT (Siemens AG); a difference >25% between best and worse slice was defined as heterogeneous emphysema. Fifty patients with heterogeneous (62.7% male; 60.9 ± 7.5 years old; FEV1% = 32.4 ± 11.4) and 14 with homogeneous emphysema (61.5% male; 62.5 ± 5.9 years old; FEV1% = 28.1 ± 10.3) fulfilled the enrolment criteria. The groups were matched for all baseline variables. ΔIC% was significantly higher in homogeneous emphysema (39.8% ± 9.8% vs.31.2% ± 13%, p = 0.031), while no other CPET parameter differed between the groups. Upper lobe predominance of emphysema correlated positively with peak oxygen pulse, peak oxygen uptake and peak respiratory rate, and negatively with ΔIC%. Homogeneous emphysema is associated with more DH during maximum exercise in COPD patients.

  18. SITE TECHNOLOGY CAPSULE: DYNAPHORE, INC., FORAGER™ SPONGE TECHNOLOGY

    Science.gov (United States)

    The Forager™ Sponge is a volume reduction technology in which heavy metal contaminants from an aqueous medium are selectively concentrated into a smaller volume for facilitated disposal. The technology treats contaminated groundwater, surface waters, and process waters by absorbi...

  19. Bone marrow response in treated patients with Gaucher disease: evaluation by T1-weighted magnetic resonance images and correlation with reduction in liver and spleen volume

    Energy Technology Data Exchange (ETDEWEB)

    Terk, M.R. [University of Southern California, Los Angeles, CA (United States). Dept. of Radiology; LAC/USC Imaging Science Center, Los Angeles, CA (United States); Dardashti, S. [University of Southern California, Los Angeles, CA (United States). Dept. of Radiology; Liebman, H.A. [University of Southern California, Los Angeles, CA (United States). Dept. of Medicine

    2000-10-01

    Purpose. To determine whether T1-weighted magnetic resonance (MR) images can demonstrate response in the marrow of patients with type 1 Gaucher disease treated with enzyme replacement therapy (ERT) and to determine whether a relationship exists between liver and spleen volume reductions and visible marrow changes.Patients. Forty-two patients with type 1 Gaucher disease were evaluated on at least two occasions. Thirty-two patients received ERT. Of these patients, 15 had a baseline examination prior to the initiation of ERT. The remaining 10 patients did not receive ERT.Design. T1-weighted and gradient recalled echo (GRE) coronal images of the femurs and hips were obtained. Concurrently, liver and spleen volumes were determined using contiguous breath-hold axial gradient-echo images. T1-weighted images of the hips and femurs were evaluated to determine change or lack of change in the yellow marrow.Results. Of the 32 patients receiving ERT, 14 (44%) demonstrated increased signal on T1-weighted images suggesting an increase in the amount of yellow marrow. If only the 15 patients with a baseline examination were considered, the response rate to ERT was 67%. Using Student's t-test a highly significant correlation (P<0.005) was found between marrow response and reduction in liver and spleen volume.Conclusions. Marrow changes in patients receiving ERT can be detected by T1-weighted images. This response correlated with reductions in visceral volumes (P<0.0005). (orig.)

  20. High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems; Volume 6 Building America Best Practices Series

    Energy Technology Data Exchange (ETDEWEB)

    None

    2007-06-01

    The sixth volume of the Building America Best Practices Series presents information that is useful throughout the U.S. for enhancing the energy efficiency practices in the specific climate zones that are presented in each of the volumes.

  1. Dynamic Control System Mode Performance of the Space Technology-7 Disturbance Reduction System

    Science.gov (United States)

    O'Donnell, James R., Jr.; Hsu, Oscar; Maghami, Peiman

    2017-01-01

    The Space Technology-7 (ST-7) Disturbance Reduction System (DRS) is an experiment package aboard the European Space Agency (ESA) LISA Pathfinder spacecraft, launched on December 3, 2015. DRS consists of three primary components: Colloidal MicroNewton Thrusters (CMNTs), an Integrated Avionics Unit (IAU), and flight-software implementing the Command and Data Handling (C&DH) and Dynamic Control System (DCS) algorithms. The CMNTs were designed to provide thrust from 5 to 30 micro Newton, with thrust controllability and resolution of 0.1 micro Newton and thrust noise of 0.1 micro Newton/(square root of (Hz)) in the measurement band from 1-30 mHz. The IAU hosts the C&DH and DCS flight software, as well as interfaces with both the CMNT electronics and the LISA Pathfinder spacecraft. When in control, the DCS uses star tracker attitude data and capacitive or optically-measured position and attitude information from LISA Pathfinder and the LISA Technology Package (LTP) to control the attitude and position of the spacecraft and the two test masses inside the LTP. After completion of the nominal ESA LISA Pathfinder mission, the DRS experiment was commissioned followed by its nominal mission. DRS operations extended over the next five months, interspersed with station keeping, anomaly resolution, and periods where control was handed back to LISA Pathfinder for them to conduct further experiments. The primary DRS mission ended on December 6, 2016, with the experiment meeting all of its Level 1 requirements. The DCS, developed at the NASA Goddard Space Flight Center, consists of five spacecraft control modes and six test mass control modes, combined into six 'DRS Mission Modes'. Attitude Control and Zero-G were primarily used to control the spacecraft during initial handover and during many of the CMNT characterization experiments. The other Mission Modes, Drag Free Low Force, 18-DOF Transitional, and 18-DOF, were used to provide drag-free control of the spacecraft about the test

  2. 重度肺气肿的内镜下肺减容治疗技术%Application of endoscopic lung volume reduction technique in severe emphysema

    Institute of Scientific and Technical Information of China (English)

    迟晶; 郭述良; 贾晋伟; 李一诗

    2013-01-01

    慢性阻塞性肺病(chronic obstructive pulmonary diseases,COPD)在世界范围的发病率和死亡率占主要因素.COPD发展至重度肺气肿阶段时严重影响患者生活质量.内镜肺减容术(endoscopic lung volume reduction,ELVR)是通过支气管镜技术使过度充气的肺叶产生不张,疗效较传统的内科治疗更为确切,与外科肺减容术相比,ELVR以其微创,操作相对简单,并发症和死亡率降低等优点,引起了世界医学界的广泛研究.目前国内外研究较多的内镜下肺减容技术主要包括支气管内单向活瓣技术(one-way endobronchial valves,EBV)、气道旁路支架(airway bypass stents,ABS)、聚合物肺减容术(polymeric lung volume reduction,PLVR)、经支气管镜热蒸汽消融术(bronchoscopic thermal vapor ablation,BTVA)和肺减容弹簧圈(lung volume reduction coil,LVRC)等5种.本文将就上述内镜肺减容技术作一综述.%Chronic obstructive pulmonary disease (COPD) is a major cause of morbidity and mortality worldwide.Once the disease develops into severe emphysema,it seriously affects the patients' life quality.Endoscopic lung volume reduction(ELVR) with bronchoscopic techniques to bring about atelectasis of the hyperinflated lobe has been developed and studied widely over the past decade,because it has a better clinical effect than the traditional medicine treatment.The techniques have the advantages of minimally invasive and simple with less complications and lower mortality compared to the open surgical approach.Nowadays the most commonly used ELVR techniques include one-way endobronchial valves (EBV),airway bypass stents (ABS),polymeric lung volume reduction (PLVR),bronchoscopic thermal vapor ablation (BTVA) and lung volume reduction coil (LVRC).In this paper the ELVR techniques are reviewed.

  3. Fuel Savings and Emission Reductions from Next-Generation Mobile Air Conditioning Technology in India

    Energy Technology Data Exchange (ETDEWEB)

    Chaney, L.; Thundiyil, K.; Andersen, S.; Chidambaram, S.; Abbi, Y. P.

    2007-01-01

    Up to 19.4% of vehicle fuel consumption in India is devoted to air conditioning (A/C). Indian A/C fuel consumption is almost four times the fuel penalty in the United States and close to six times that in the European Union because India's temperature and humidity are higher and because road congestion forces vehicles to operate inefficiently. Car A/C efficiency in India is an issue worthy of national attention considering the rate of increase of A/C penetration into the new car market, India's hot climatic conditions and high fuel costs. Car A/C systems originally posed an ozone layer depletion concern. Now that industrialized and many developing countries have moved away from ozone-depleting substances per Montreal Protocol obligations, car A/C impact on climate has captured the attention of policy makers and corporate leaders. Car A/C systems have a climate impact from potent global warming potential gas emissions and from fuel used to power the car A/Cs. This paper focuses on car A/C fuel consumption in the context of the rapidly expanding Indian car market and how new technological improvements can result in significant fuel savings and consequently, emission reductions. A 19.4% fuel penalty is associated with A/C use in the typical Indian passenger car. Car A/C fuel use and associated tailpipe emissions are strong functions of vehicle design, vehicle use, and climate conditions. Several techniques: reducing thermal load, improving vehicle design, improving occupants thermal comfort design, improving equipment, educating consumers on impacts of driver behaviour on MAC fuel use, and others - can lead to reduced A/C fuel consumption.

  4. Energy Saving Melting and Revert Reduction Technology (Energy SMARRT): Development of CCT Diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Chumbley, L Scott

    2011-08-20

    One of the most energy intensive industries in the U.S. today is in the melting and casting of steel alloys for use in our advanced technological society. While the majority of steel castings involve low or mild carbon steel for common construction materials, highly-alloyed steels constitute a critical component of many industries due to their excellent properties. However, as the amount of alloying additions increases, the problems associated with casting these materials also increases, resulting in a large waste of energy due to inefficiency and a lack of basic information concerning these often complicated alloy systems. Superaustenitic stainless steels constitute a group of Fe-based alloys that are compositionally balanced to have a purely austenitic matrix and exhibit favorable pitting and crevice corrosion resistant properties and mechanical strength. However, intermetallic precipitates such as sigma (³) and Laves can form during casting or exposure to high-temperature processing, which degrade the corrosion and mechanical properties of the material. Knowledge of the times and temperatures at which these detrimental phases form is imperative if a company is to efficiently produce castings of high quality in the minimum amount of time, using the lowest amount of energy possible, while producing the least amount of material waste. Anecdotal evidence from company representatives revealed that large castings frequently had to be scrapped due to either lower than expected corrosion resistance or extremely low fracture toughness. It was suspected that these poor corrosion and / or mechanical properties were directly related to the type, amount, and location of various intermetallic phases that formed during either the cooling cycle of the castings or subsequent heat treatments. However, no reliable data existed concerning either the time-temperature-transformation (TTT) diagrams or the continuous-cooling-transformation (CCT) diagrams of the super-austenitics. The

  5. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Mechanical Performance of Dies

    Energy Technology Data Exchange (ETDEWEB)

    R. Allen Miller, Principal Investigator; Kabiri-Bamoradian, Contributors: Khalil; Delgado-Garza, Abelardo; Murugesan, Karthik; Ragab, Adham

    2011-09-13

    provided to NADCA for distribution to the industry. Power law based meta-models for predicting machine tie bar loading and for predicting maximum parting surface separation were successfully developed and tested against simulation results for a wide range of machines and experimental data. The models proved to be remarkably accurate, certainly well within the requirements for practical application. In addition to making die structural modeling more accessible, the work advanced the state-of-the-art by developing improved modeling of cavity pressure effects, which is typically modeled as a hydrostatic boundary condition, and performing a systematic analysis of the influence of ejector die design variables on die deflection and parting plane separation. This cavity pressure modeling objective met with less than complete success due to the limits of current finite element based fluid structure interaction analysis methods, but an improved representation of the casting/die interface was accomplished using a combination of solid and shell elements in the finite element model. This approximation enabled good prediction of final part distortion verified with a comprehensive evaluation of the dimensions of test castings produced with a design experiment. An extra deliverable of the experimental work was development of high temperature mechanical properties for the A380 die casting alloy. The ejector side design objective was met and the results were incorporated into the metamodels described above. This new technology was predicted to result in an average energy savings of 2.03 trillion BTU's/year over a 10 year period. Current (2011) annual energy saving estimates over a ten year period, based on commercial introduction in 2009, a market penetration of 70% by 2014 is 4.26 trillion BTU's/year by 2019. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting

  6. Fuel cycle analysis based evaluation of the fuel and emissions reduction potential of adapting the hybrid technology to tricycles

    Energy Technology Data Exchange (ETDEWEB)

    Biona, J.B.M. [Don Bosco Technical College, Mandaluyong City (Philippines); De La Salle University, Center for Engineering and Sustainable Development Research, Manila (Philippines); Culaba, A.B. [De La Salle University, Center for Engineering and Sustainable Development Research, Manila (Philippines); Purvis, M.R.I. [University of Portsmouth, Department of Mechanical Design and Engineering, Portsmouth (United Kingdom)

    2008-02-15

    A preliminary analysis has been conducted to investigate the fuel use and emissions reduction potential of incorporating hybrid systems to two stroke powered tricycles in Metro Manila. Carbureted and direct injection two stroke engine hybrid systems were investigated and compared with the impact of shifting to four stroke engines. Results showed that hybridized direct injection retrofitted two stroke powered systems would be able to provide far better environmental and fuel reduction benefits than the shift to new four strokes tricycles. It is thus recommended that the development of such technology specifically for tricycles be seriously pursued. (orig.)

  7. Acoustic Performance of Novel Fan Noise Reduction Technologies for a High Bypass Model Turbofan at Simulated Flights Conditions

    Science.gov (United States)

    Elliott, David M.; Woodward, Richard P.; Podboy, Gary G.

    2010-01-01

    Two novel fan noise reduction technologies, over the rotor acoustic treatment and soft stator vane technologies, were tested in an ultra-high bypass ratio turbofan model in the NASA Glenn Research Center s 9- by 15-Foot Low-Speed Wind Tunnel. The performance of these technologies was compared to that of the baseline fan configuration, which did not have these technologies. Sideline acoustic data and hot film flow data were acquired and are used to determine the effectiveness of the various treatments. The material used for the over the rotor treatment was foam metal and two different types were used. The soft stator vanes had several internal cavities tuned to target certain frequencies. In order to accommodate the cavities it was necessary to use a cut-on stator to demonstrate the soft vane concept.

  8. Eleventh annual Department of Energy low-level waste management conference. Volume 3: Waste characterization, waste reduction and minimization, prototype licensing application

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-11-01

    Thirteen papers are presented in volume 3. The seven papers on waste characterization discuss sampling, analysis, and certification techniques for low-level radioactive wastes. Three papers discuss US DOE waste minimization policies and regulations, Y-12 Plant`s reduction of chlorinated solvents, and C-14 removal from spent resins. The last three papers discuss the licensing studies for earth-mounded concrete bunkers for LLW disposal. Papers have been processed separately for inclusion on the data base.

  9. Eleventh annual Department of Energy low-level waste management conference. Volume 3: Waste characterization, waste reduction and minimization, prototype licensing application

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-11-01

    Thirteen papers are presented in volume 3. The seven papers on waste characterization discuss sampling, analysis, and certification techniques for low-level radioactive wastes. Three papers discuss US DOE waste minimization policies and regulations, Y-12 Plant`s reduction of chlorinated solvents, and C-14 removal from spent resins. The last three papers discuss the licensing studies for earth-mounded concrete bunkers for LLW disposal. Papers have been processed separately for inclusion on the data base.

  10. Seismic design technology for Breeder Reactor structures. Volume 3: special topics in reactor structures

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P. (ed)

    1983-04-01

    This volume is divided into six chapters: analysis techniques, equivalent damping values, probabilistic design factors, design verifications, equivalent response cycles for fatigue analysis, and seismic isolation. (JDB)

  11. The space shuttle payload planning working groups. Volume 10: Space technology

    Science.gov (United States)

    1973-01-01

    The findings and recommendations of the Space Technology group of the space shuttle payload planning activity are presented. The elements of the space technology program are: (1) long duration exposure facility, (2) advanced technology laboratory, (3) physics and chemistry laboratory, (4) contamination experiments, and (5) laser information/data transmission technology. The space technology mission model is presented in tabular form. The proposed experiments to be conducted by each test facility are described. Recommended approaches for user community interfacing are included.

  12. Noise and vibration reduction technology in hybrid vehicle development; Hybrid sha kaihatsu ni okeru shindo soon teigen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yoshioa, T.; Sugita, H. [Toyota Motor Corp., Aichi (Japan)

    2000-03-01

    Accomplishing both environmental protection and good NVH performance has become a significant task in automotive development The first-in-the-world hybrid passenger car of mass production. 'Prius', has achieved superior NV performance compared with conventional vehicles with a 1.5-liter engine along with 50% reduction of fuel consumption and CO{sub 2} emissions. low HC, CO and NO{sub x} emissions. This paper describes NV reduction technology for solving problems peculiar to the hybrid vehicle such as engine start/stop vibration, drone noise at low engine speed and motor/generator noise and vibration. It also mentions application technology of low rolling resistance tires with light weight wheels and recycled material for sound proofing. (author)

  13. Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology Presented at the Annual Convention of the Association for Educational Communications and Technology (33rd, Anaheim, California, 2010). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2010-01-01

    For the thirty-third year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. This is Volume #2 of the 33rd "Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology." This volume includes…

  14. Regional Brain Volumes Moderate, but Do Not Mediate, the Effects of Group-Based Exercise Training on Reductions in Loneliness in Older Adults

    Directory of Open Access Journals (Sweden)

    Diane K. Ehlers

    2017-04-01

    Full Text Available Introduction: Despite the prevalence of and negative health consequences associated with perceived loneliness in older adults, few studies have examined interactions among behavioral, psychosocial, and neural mechanisms. Research suggests that physical activity and improvements in perceived social support and stress are related to reductions in loneliness. Yet, the influence of brain structure on these changes is unknown. The present study examined whether change in regional brain volume mediated the effects of changes in social support and stress on change in perceived loneliness after an exercise intervention. We also examined the extent to which baseline brain volumes moderated the relationship between changes in social support, stress, and loneliness.Methods: Participants were 247 older adults (65.4 ± 4.6 years-old enrolled in a 6-month randomized controlled trial comprised of four exercise conditions: Dance (n = 69, Strength/Stretching/Stability (n = 70, Walk (n = 54, and Walk Plus (n = 54. All groups met for 1 h, three times weekly. Participants completed questionnaires assessing perceived social support, stress, and loneliness at baseline and post-intervention. Regional brain volumes (amygdala, prefrontal cortex [PFC], hippocampus before and after intervention were measured with automatic segmentation of each participant's T1-weighted structural MRI. Data were analyzed in a latent modeling framework.Results: Perceived social support increased (p = 0.003, while stress (p < 0.001, and loneliness (p = 0.001 decreased over the intervention. Increased social support directly (−0.63, p < 0.01 and indirectly, through decreased stress (−0.10, p = 0.02, predicted decreased loneliness. Changes in amygdala, PFC, and hippocampus volumes were unrelated to change in psychosocial variables (all p ≥ 0.44. However, individuals with larger baseline amygdalae experienced greater decreases in loneliness due to greater reductions in stress (0.35, p = 0

  15. Regional Brain Volumes Moderate, but Do Not Mediate, the Effects of Group-Based Exercise Training on Reductions in Loneliness in Older Adults.

    Science.gov (United States)

    Ehlers, Diane K; Daugherty, Ana M; Burzynska, Agnieszka Z; Fanning, Jason; Awick, Elizabeth A; Chaddock-Heyman, Laura; Kramer, Arthur F; McAuley, Edward

    2017-01-01

    Introduction: Despite the prevalence of and negative health consequences associated with perceived loneliness in older adults, few studies have examined interactions among behavioral, psychosocial, and neural mechanisms. Research suggests that physical activity and improvements in perceived social support and stress are related to reductions in loneliness. Yet, the influence of brain structure on these changes is unknown. The present study examined whether change in regional brain volume mediated the effects of changes in social support and stress on change in perceived loneliness after an exercise intervention. We also examined the extent to which baseline brain volumes moderated the relationship between changes in social support, stress, and loneliness. Methods: Participants were 247 older adults (65.4 ± 4.6 years-old) enrolled in a 6-month randomized controlled trial comprised of four exercise conditions: Dance (n = 69), Strength/Stretching/Stability (n = 70), Walk (n = 54), and Walk Plus (n = 54). All groups met for 1 h, three times weekly. Participants completed questionnaires assessing perceived social support, stress, and loneliness at baseline and post-intervention. Regional brain volumes (amygdala, prefrontal cortex [PFC], hippocampus) before and after intervention were measured with automatic segmentation of each participant's T1-weighted structural MRI. Data were analyzed in a latent modeling framework. Results: Perceived social support increased (p = 0.003), while stress (p < 0.001), and loneliness (p = 0.001) decreased over the intervention. Increased social support directly (-0.63, p < 0.01) and indirectly, through decreased stress (-0.10, p = 0.02), predicted decreased loneliness. Changes in amygdala, PFC, and hippocampus volumes were unrelated to change in psychosocial variables (all p ≥ 0.44). However, individuals with larger baseline amygdalae experienced greater decreases in loneliness due to greater reductions in stress (0.35, p = 0

  16. Technical and economic assessment of fluidized bed augmented compressed air energy-storage system. Volume II. Introduction and technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Giramonti, A.J.; Lessard, R.D.; Merrick, D.; Hobson, M.J.

    1981-09-01

    The results are described of a study subcontracted by PNL to the United Technologies Research Center on the engineering feasibility and economics of a CAES concept which uses a coal fired, fluidized bed combustor (FBC) to heat the air being returned from storage during the power production cycle. By burning coal instead of fuel oil, the CAES/FBC concept can completely eliminate the dependence of compressed air energy storage on petroleum fuels. The results of this assessment effort are presented in three volumes. Volume II presents a discussion of program background and an in-depth coverage of both fluid bed combustion and turbomachinery technology pertinent to their application in a CAES power plant system. The CAES/FBC concept appears technically feasible and economically competitive with conventional CAES. However, significant advancement is required in FBC technology before serious commercial commitment to CAES/FBC can be realized. At present, other elements of DOE, industrial groups, and other countries are performing the required R and D for advancement of FBC technology. The CAES/FBC will be reevaluated at a later date when FBC technology has matured and many of the concerns now plaguing FBC are resolved. (LCL)

  17. Idaho National Engineering Laboratory waste area groups 1--7 and 10 Technology Logic Diagram. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Technology Logic Diagram was developed to provide technical alternatives for environmental restoration projects at the Idaho National Engineering Laboratory. The diagram (three volumes) documents suggested solutions to the characterization, retrieval, and treatment phases of cleanup activities at contaminated sites within 8 of the laboratory`s 10 waste area groups. Contaminated sites at the laboratory`s Naval Reactor Facility and Argonne National Laboratory-West are not included in this diagram.

  18. 云存储数据缩减技术研究%Research on cloud storage data reduction technology

    Institute of Scientific and Technical Information of China (English)

    胡新海

    2012-01-01

    基于云计算应用中的云存储技术,使数据存储变得安全可靠和易管理。在云存储技术数据存储的过程中,不仅考虑数据读写的速度,还得处理数据存储效率,以便满足当前海量信息存储的需求。云存储中的数据缩减技术可以缩减数据信息量,提高存储的效率,满足数据存储急剧的要求。通过对几种数据缩减技术进行比较研究分析,探讨了对数据处理后存储的效率以及每项技术发展状况,为用户选择云存储数据缩减技术提供有力的参考。%Based on cloud storage technology applied in cloud computing applications, data storage has become more safer, reliable and manageable. During the process of cloud data storage,we not only consider the speed of data read and write,but also deal with the efficiency of data storage,in order to meet the needs of the vast amounts of information storage. Cloud storage data reduction technology can reduce the data amount of information to improve the efficiency of the storage to meet drastic re- quirements of data storage. Through a comparative study of several pairs of data reduction technology carried out, the author discuss and analyze the efficiency of the stored after the data processing and the technological development status to provide strong reference for the user to select the cloud storage data reduction technology.

  19. Fuel Savings and Emission Reductions from Next-Generation Mobile Air Conditioning Technology in India: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Chaney, L.; Thundiyil, K.; Chidambaram, S.; Abbi, Y. P.; Anderson, S.

    2007-05-01

    This paper quantifies the mobile air-conditioning fuel consumption of the typical Indian vehicle, exploring potential fuel savings and emissions reductions these systems for the next generation of vehicles.

  20. Magnetic resonance imaging signal reduction may precede volume loss in the pituitary gland of transfusion-dependent beta-thalassemic patients

    Energy Technology Data Exchange (ETDEWEB)

    Hekmatnia, Ali; Rahmani, Ali Asghar; Adibi, Atoosa (Image Processing and Signal Research Center, Dept. of Radiology, Isfahan Univ. of Medical Sciences, Isfahan (Iran)); Radmard, Amir Reza (Dept. of Radiology, Shariati Hospital, Tehran Univ. of Medical Sciences, Tehran (Iran)); Khademi, Hooman (Shariati Hospital, Tehran Univ. of Medical Sciences, Tehran (Iran)), e-mail: radmard@ams.ac.ir

    2010-01-15

    Background: Pituitary iron overload in patients with transfusion-dependent beta-thalassemia may lead to delayed puberty. Magnetic resonance imaging (MRI) has the potential to estimate tissue iron concentration by detecting its paramagnetic effect and hypophyseal damage by measuring its dimensions indirectly. Purpose: To investigate the association of pituitary MRI findings and pubertal status in thalassemic patients as well as to demonstrate any priority in appearance of them. Material and Methods: Twenty-seven beta-thalassemic patients, aged 15-25 years, were divided into 13 with (group A) and 14 without hypogonadism (group B), matched by age, gender, duration of transfusion, and chelation therapy. Thirty-eight age- and sex-adjusted healthy control individuals were also included (group C). All participants underwent pituitary MRI using a 1.5T unit. Pituitary-to-fat signal intensity ratios (SIR) were calculated from coronal T2-weighted images. Estimated pituitary volumes were measured using pituitary height, width, and length on T1-weighted images. Results: The mean values of pituitary-to-fat SIRs were significantly lower in group A as compared with group B (P <0.001), and likewise group B had statistically lower values than group C (P=0.03). The pituitary height and volume were significantly decreased in group A compared to group B (P = 0.006 and P = 0.002, respectively), while these differences did not demonstrate statistically significance between groups B and C. Conclusion: Pituitary MRI findings such as signal intensity reduction and decrease in volume can be useful markers in estimating pituitary dysfunction in beta-thalassemic patients. Compared to healthy controls, lower values of pituitary-to-fat SIRs in thalassemic patients experiencing normal puberty, without marked decrease in volume, indicate that signal reduction may precede volume loss and could be expected first on MRI

  1. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES, VOLUME II

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

  2. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

  3. A Modeled Carbon Emission Analysis Of Rampal Power Plant In Bangladesh And A Review Of Carbon Reduction Technologies

    Directory of Open Access Journals (Sweden)

    Gour Chand Mazumder

    2015-08-01

    Full Text Available todays most important concern of Bangladesh is power generation. Government has planned a 1320 MW coal-fired power station at Rampal near Sundarbans. Environmentalists have indicated that this plant will face environmental issues. So we tried finding the capability of Sundarbans to face carbon emissions. We figured out approximate carbon emission of that power plant using an arbitrary operational model. We found 3.16MKg of carbon emission daily. We used mangroves carbon sequestration rate to calculate the carbon tolerance level of Sundarbans and found approximately 4.2 MKg of carbon per day.The amount of emission we found here is marginal with the ability of Sundarbans as it is already contributing to sequester carbon from other sources. We studied and showed technology wise carbon reductions. It is possible to reduce 90 to 95 carbon emissioby using these technologies. We recommend these advanced technologies to ensure sundarbans environmental safety.

  4. Emerging Energy-efficiency and Carbon Dioxide Emissions-reduction Technologies for the Iron and Steel Industry

    Energy Technology Data Exchange (ETDEWEB)

    Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Dept.. China Energy Group; Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Dept.. China Energy Group; Arens, Marlene [Fraunhofer Inst. for Systems and Innovation Research (ISI), Karlsruhe (Germany)

    2013-01-31

    Iron and steel manufacturing is among the most energy-intensive industries and accounts for the largest share, approximately 27 percent, of global carbon dioxide (CO2) emissions from the manufacturing sector. The ongoing increase in world steel demand means that this industry’s energy use and CO2 emissions continue to grow, so there is significant incentive to develop, commercialize and adopt emerging energy-efficiency and CO2 emissions-reduction technologies for steel production. Although studies from around the world have identified a wide range of energy-efficiency technologies applicable to the steel industry that have already been commercialized, information is limited and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on 56 emerging iron and steel industry technologies, with the intent of providing a well-structured database of information on these technologies for engineers, researchers, investors, steel companies, policy makers, and other interested parties. For each technology included, we provide information on energy savings and environmental and other benefits, costs, and commercialization status; we also identify references for more information.

  5. Emerging Energy-efficiency and CO{sub 2} Emission-reduction Technologies for Cement and Concrete Production

    Energy Technology Data Exchange (ETDEWEB)

    Hasanbeigi, Ali; Price, Lynn; Lin, Elina

    2012-04-06

    Globally, the cement industry accounts for approximately 5 percent of current anthropogenic carbon dioxide (CO{sub 2}) emissions. World cement demand and production are increasing significantly, leading to an increase in this industry's absolute energy use and CO{sub 2} emissions. Development of new energy-efficiency and CO{sub 2} emission-reduction technologies and their deployment in the market will be key for the cement industry's mid- and long-term climate change mitigation strategies. This report is an initial effort to compile available information on process description, energy savings, environmental and other benefits, costs, commercialization status, and references for emerging technologies to reduce the cement industry's energy use and CO{sub 2} emissions. Although studies from around the world identify a variety of sector-specific and cross-cutting energy-efficiency technologies for the cement industry that have already been commercialized, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on nineteen emerging technologies for the cement industry, with the goal of providing engineers, researchers, investors, cement companies, policy makers, and other interested parties with easy access to a well-structured database of information on these technologies.

  6. Limb volume measurement: from the past methods to optoelectronic technologies, bioimpedance analysis and laser based devices.

    Science.gov (United States)

    Cavezzi, A; Schingale, F; Elio, C

    2010-10-01

    Accurate measurement of limb volume is considered crucial to lymphedema management. Various non-invasive methods may be used and have been validated in recent years, though suboptimal standardisation has been highlighted in different publications.

  7. Low-rank coal study: national needs for resource development. Volume 3. Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    Technologies applicable to the development and use of low-rank coals are analyzed in order to identify specific needs for research, development, and demonstration (RD and D). Major sections of the report address the following technologies: extraction; transportation; preparation, handling and storage; conventional combustion and environmental control technology; gasification; liquefaction; and pyrolysis. Each of these sections contains an introduction and summary of the key issues with regard to subbituminous coal and lignite; description of all relevant technology, both existing and under development; a description of related environmental control technology; an evaluation of the effects of low-rank coal properties on the technology; and summaries of current commercial status of the technology and/or current RD and D projects relevant to low-rank coals.

  8. A Novel Technology for Simultaneous TOC Reduction and Biofouling Prevention Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Recycling of water using biological processes is a primary goal of NASA's advanced life support programs. This proposal concerns a technology to simultaneously...

  9. Demonstration of improved vehicle fuel efficiency through innovative tire design, materials, and weight reduction technologies

    Energy Technology Data Exchange (ETDEWEB)

    Donley, Tim [Cooper Tire & Rubber Company Incorporated, Findlay, OH (United States)

    2014-12-31

    Cooper completed an investigation into new tire technology using a novel approach to develop and demonstrate a new class of fuel efficient tires using innovative materials technology and tire design concepts. The objective of this work was to develop a new class of fuel efficient tires, focused on the “replacement market” that would improve overall passenger vehicle fuel efficiency by 3% while lowering the overall tire weight by 20%. A further goal of this project was to accomplish the objectives while maintaining the traction and wear performance of the control tire. This program was designed to build on what has already been accomplished in the tire industry for rolling resistance based on the knowledge and general principles developed over the past decades. Cooper’s CS4 (Figure #1) premium broadline tire was chosen as the control tire for this program. For Cooper to achieve the goals of this project, the development of multiple technologies was necessary. Six technologies were chosen that are not currently being used in the tire industry at any significant level, but that showed excellent prospects in preliminary research. This development was divided into two phases. Phase I investigated six different technologies as individual components. Phase II then took a holistic approach by combining all the technologies that showed positive results during phase one development.

  10. Localized gray matter volume reductions in the pars triangularis of the inferior frontal gyrus in individuals at clinical high-risk for psychosis and first episode for schizophrenia.

    Science.gov (United States)

    Iwashiro, Norichika; Suga, Motomu; Takano, Yosuke; Inoue, Hideyuki; Natsubori, Tatsunobu; Satomura, Yoshihiro; Koike, Shinsuke; Yahata, Noriaki; Murakami, Mizuho; Katsura, Masaki; Gonoi, Wataru; Sasaki, Hiroki; Takao, Hidemasa; Abe, Osamu; Kasai, Kiyoto; Yamasue, Hidenori

    2012-05-01

    Recent studies have suggested an important role for Broca's region and its right hemisphere counterpart in the pathophysiology of schizophrenia, owing to its roles in language and interpersonal information processing. Broca's region consists of the pars opercularis (PO) and the pars triangularis (PT). Neuroimaging studies have suggested that they have differential functional roles in healthy individuals and contribute differentially to the pathogenesis of schizophrenic symptoms. However, volume changes in these regions in subjects with ultra-high risk for psychosis (UHR) or first-episode schizophrenia (FES) have not been clarified. In the present 3 Tesla magnetic resonance imaging study, we separately measured the gray matter volumes of the PO and PT using a reliable manual-tracing volumetry in 80 participants (20 with UHR, 20 with FES, and 40 matched controls). The controls constituted two groups: the first group was matched for age, sex, parental socioeconomic background, and intelligence quotient to UHR (n=20); the second was matched for those to FES (n=20). Compared with matched controls, the volume of the bilateral PT, but not that of the PO, was significantly reduced in the subjects with UHR and FES. The reduced right PT volume, which showed the largest effect size among regions-of-interest in the both UHR and FES groups, correlated with the severity of the positive symptoms also in the both groups. These results suggest that localized gray matter volume reductions of the bilateral PT represent a vulnerability to schizophrenia in contrast to the PO volume, which was previously found to be reduced in patients with chronic schizophrenia. The right PT might preferentially contribute to the pathogenesis of psychotic symptoms.

  11. Risk management study for the Hanford Site facilities: Risk reduction cost comparison for the retired Hanford Site facilities. Volume 4

    Energy Technology Data Exchange (ETDEWEB)

    Coles, G.A.; Egge, R.G.; Senger, E.; Shultz, M.W.; Taylor, W.E.

    1994-02-01

    This document provides a cost-comparison evaluation for implementing certain risk-reduction measures and their effect on the overall risk of the 100 and 200 Area retired, surplus facilities. The evaluation is based on conditions that existed at the time the risk evaluation team performed facility investigations, and does not acknowledge risk-reduction measures that occurred soon after risk identification. This evaluation is one part of an overall risk management study for these facilities. The retired facilities investigated for this evaluation are located in the 100 and 200 Areas of the 1450-km{sup 2} Hanford Site. The Hanford Site is a semiarid tract of land in southeastern Washington State. The nearest population center is Richland, Washington, (population 32,000) 30 km southeast of the 200 Area. This cost-comparison evaluation (1) determines relative costs for reducing risk to acceptable levels; (2) compares the cost of reducing risk using different risk-reduction options; and (3) compares the cost of reducing risks at different facilities. The result is an identification of the cost effective risk-reduction measures. Supporting information required to develop costs of the various risk-reduction options also is included.

  12. Alternative technologies for the reduction of greenhouse gas emissions from palm oil mills in Thailand.

    Science.gov (United States)

    Kaewmai, Roihatai; H-Kittikun, Aran; Suksaroj, Chaisri; Musikavong, Charongpun

    2013-01-01

    Alternative methodologies for the reduction of greenhouse gas (GHG) emissions from crude palm oil (CPO) production by a wet extraction mill in Thailand were developed. The production of 1 t of CPO from mills with biogas capture (four mills) and without biogas capture (two mills) in 2010 produced GHG emissions of 935 kg carbon dioxide equivalent (CO2eq), on average. Wastewater treatment plants with and without biogas capture produced GHG emissions of 64 and 47% of total GHG emission, respectively. The rest of the emissions mostly originated from the acquisition of fresh fruit bunches. The establishment of a biogas recovery system must be the first step in the reduction of GHG emissions. It could reduce GHG emissions by 373 kgCO2eq/t of CPO. The main source of GHG emission of 163 kgCO2eq/t of CPO from the mills with biogas capture was the open pond used for cooling of wastewater before it enters the biogas recovery system. The reduction of GHG emissions could be accomplished by (i) using a wastewater-dispersed unit for cooling, (ii) using a covered pond, (iii) enhancing the performance of the biogas recovery system, and (iv) changing the stabilization pond to an aerated lagoon. By using options i-iv, reductions of GHG emissions of 216, 208, 92.2, and 87.6 kgCO2eq/t of CPO, respectively, can be achieved.

  13. A new technology for the reduction of particulate matter from diesel engines in ships

    NARCIS (Netherlands)

    Van Rens, G.L.M.A.

    2008-01-01

    In this thesis the focus is on the particulate matter reduction of ships, as ships contribute significantly to the particulate matter concentration in ambient air. Because the fuel of sea ships contains a lot of ash, the emitted particulate matter will also contain a lot of ash. In car and truck app

  14. A new technology for the reduction of particulate matter from diesel engines in ships

    NARCIS (Netherlands)

    Van Rens, G.L.M.A.

    2008-01-01

    In this thesis the focus is on the particulate matter reduction of ships, as ships contribute significantly to the particulate matter concentration in ambient air. Because the fuel of sea ships contains a lot of ash, the emitted particulate matter will also contain a lot of ash. In car and truck app

  15. Reduction of Microbial and Chemical Contaminants in Water Using POU/POE & Mobile Treatment Technologies

    Science.gov (United States)

    POU/POE may be a cost-effective option for reductions of a particular chemical to achieve water quality compliance under certain situations and given restrictions. Proactive consumers seeking to reduce exposure to potential pathogens, trace chemicals, and nanoparticles not curre...

  16. ARV robotic technologies (ART): a risk reduction effort for future unmanned systems

    Science.gov (United States)

    Jaster, Jeffrey F.

    2006-05-01

    The Army's ARV (Armed Robotic Vehicle) Robotic Technologies (ART) program is working on the development of various technological thrusts for use in the robotic forces of the future. The ART program will develop, integrate and demonstrate the technology required to advance the maneuver technologies (i.e., perception, mobility, tactical behaviors) and increase the survivability of unmanned platforms for the future force while focusing on reducing the soldiers' burden by providing an increase in vehicle autonomy coinciding with a decrease in the total number user interventions required to control the unmanned assets. This program will advance the state of the art in perception technologies to provide the unmanned platform an increasingly accurate view of the terrain that surrounds it; while developing tactical/mission behavior technologies to provide the Unmanned Ground Vehicle (UGV) the capability to maneuver tactically, in conjunction with the manned systems in an autonomous mode. The ART testbed will be integrated with the advanced technology software and associated hardware developed under this effort, and incorporate appropriate mission modules (e.g. RSTA sensors, MILES, etc.) to support Warfighter experiments and evaluations (virtual and field) in a military significant environment (open/rolling and complex/urban terrain). The outcome of these experiments as well as other lessons learned through out the program life cycle will be used to reduce the current risks that are identified for the future UGV systems that will be developed under the Future Combat Systems (FCS) program, including the early integration of an FCS-like autonomous navigation system onto a tracked skid steer platform.

  17. HPA-axis function and grey matter volume reductions: imaging the diathesis-stress model in individuals at ultra-high risk of psychosis.

    Science.gov (United States)

    Valli, I; Crossley, N A; Day, F; Stone, J; Tognin, S; Mondelli, V; Howes, O; Valmaggia, L; Pariante, C; McGuire, P

    2016-05-03

    The onset of psychosis is thought to involve interactions between environmental stressors and the brain, with cortisol as a putative mediator. We examined the relationship between the cortisol stress response and brain structure in subjects at ultra-high risk (UHR) for psychosis. Waking salivary cortisol was measured in 22 individuals at UHR for psychosis and 17 healthy controls. Grey matter volume was assessed using magnetic resonance imaging at 3 T. The relationship between the stress response and grey matter volume was investigated using voxel-based analyses. Our predictions of the topography of cortisol action as a structural brain modulator were informed by measures of brain glucocorticoid and mineralcorticoid receptor distribution obtained from the multimodal neuroanatomical and genetic Allen Brain Atlas. Across all subjects, reduced responsivity of the hypothalamus-pituitary-adrenal (HPA) axis was correlated with smaller grey matter volumes in the frontal, parietal and temporal cortex and in the hippocampus. This relationship was particularly marked in the UHR subjects in the right prefrontal, left parahippocampal/fusiform and parietal cortices. The subgroup that subsequently developed psychosis showed a significant blunting of HPA stress response, observed at trend level also in the whole UHR sample. Altered responses to stress in people at high risk of psychosis are related to reductions in grey matter volume in areas implicated in the vulnerability to psychotic disorders. These areas may represent the neural components of a stress vulnerability model.

  18. Leito de drenagem: sistema natural para redução de volume de lodo de estação de tratamento de água Draining beds: natural system for sludge volume reduction in the water treatment plant

    Directory of Open Access Journals (Sweden)

    Cali Laguna Achon

    2008-03-01

    Full Text Available As Estações de Tratamento de Água (ETAs tem funcionamento semelhante a uma indústria e podem em diversas etapas gerar resíduos que, na maioria das ETAs, são lançados nos corpos d’água sem tratamento. Neste trabalho avaliou-se o desempenho de Leitos de Drenagem, para o desaguamento de lodo, provenientes de ETAs de ciclo completo que empregam sulfato de alumínio e cloreto de polialumínio (PACl, como coagulantes. Analisou-se as características, a drenagem e secagem dos amostras de lodo e característica do drenado. Os Leitos de Drenagem mostraram-se eficientes para desaguamento e redução de volume de lodo de ETA, de forma natural, sem consumo de energia ou adição de produtos químicos. Obteve-se, aos sete dias, reduções da ordem de 87 % em volume para os lodos de PACl e 83 % para o lodo de Sulfato de Alumínio e teor de sólidos totais 28% e 31% respectivamente.In this work the performance of Draining Beds for sludge dewatering was assessed. The sludge was provided from full cycle Water Treatment Plants (WTPs that employ aluminum sulfate and polyaluminium chloride (PACl as coagulants. The characteristics, drainage and drying of samples of sludge and characteristic of drained were analysed. The Draining Beds were shown to be efficient for dewatering and sludge volume reduction in the WTP, in a natural way, without energy consumption or adding of chemical products. On the seventh day, it was possible to obtain reduction around 87% in volume for PACl sludge and 83% for the aluminum sulfate sludge and total solids content of 28 and 31% respectively.

  19. Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4. Volume 1: Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    During World War 11, the Oak Ridge Y-12 Plant was built as part of the Manhattan Project to supply enriched uranium for weapons production. In 1945, Building 9201-4 (Alpha-4) was originally used to house a uranium isotope separation process based on electromagnetic separation technology. With the startup of the Oak Ridge K-25 Site gaseous diffusion plant In 1947, Alpha-4 was placed on standby. In 1953, the uranium enrichment process was removed, and installation of equipment for the Colex process began. The Colex process--which uses a mercury solvent and lithium hydroxide as the lithium feed material-was shut down in 1962 and drained of process materials. Residual Quantities of mercury and lithium hydroxide have remained in the process equipment. Alpha-4 contains more than one-half million ft{sup 2} of floor area; 15,000 tons of process and electrical equipment; and 23,000 tons of insulation, mortar, brick, flooring, handrails, ducts, utilities, burnables, and sludge. Because much of this equipment and construction material is contaminated with elemental mercury, cleanup is necessary. The goal of the Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 is to provide a planning document that relates decontamination and decommissioning and waste management problems at the Alpha-4 building to the technologies that can be used to remediate these problems. The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 builds on the methodology transferred by the U.S. Air Force to the Environmental Management organization with DOE and draws from previous technology logic diagram-efforts: logic diagrams for Hanford, the K-25 Site, and ORNL.

  20. Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 2

    Science.gov (United States)

    Greenburg, J. S.; Kaplan, M.; Fishman, J.; Hopkins, C.

    1985-01-01

    The computational procedures used in the evaluation of spacecraft technology programs that impact upon commercial communication satellite operations are discussed. Computer programs and data bases are described.

  1. Carbon Dioxide Separation from Flue Gases: A Technological Review Emphasizing Reduction in Greenhouse Gas Emissions

    Science.gov (United States)

    Songolzadeh, Mohammad; Soleimani, Mansooreh; Takht Ravanchi, Maryam; Songolzadeh, Reza

    2014-01-01

    Increasing concentrations of greenhouse gases (GHGs) such as CO2 in the atmosphere is a global warming. Human activities are a major cause of increased CO2 concentration in atmosphere, as in recent decade, two-third of greenhouse effect was caused by human activities. Carbon capture and storage (CCS) is a major strategy that can be used to reduce GHGs emission. There are three methods for CCS: pre-combustion capture, oxy-fuel process, and post-combustion capture. Among them, post-combustion capture is the most important one because it offers flexibility and it can be easily added to the operational units. Various technologies are used for CO2 capture, some of them include: absorption, adsorption, cryogenic distillation, and membrane separation. In this paper, various technologies for post-combustion are compared and the best condition for using each technology is identified. PMID:24696663

  2. Carbon dioxide separation from flue gases: a technological review emphasizing reduction in greenhouse gas emissions.

    Science.gov (United States)

    Songolzadeh, Mohammad; Soleimani, Mansooreh; Takht Ravanchi, Maryam; Songolzadeh, Reza

    2014-01-01

    Increasing concentrations of greenhouse gases (GHGs) such as CO2 in the atmosphere is a global warming. Human activities are a major cause of increased CO2 concentration in atmosphere, as in recent decade, two-third of greenhouse effect was caused by human activities. Carbon capture and storage (CCS) is a major strategy that can be used to reduce GHGs emission. There are three methods for CCS: pre-combustion capture, oxy-fuel process, and post-combustion capture. Among them, post-combustion capture is the most important one because it offers flexibility and it can be easily added to the operational units. Various technologies are used for CO2 capture, some of them include: absorption, adsorption, cryogenic distillation, and membrane separation. In this paper, various technologies for post-combustion are compared and the best condition for using each technology is identified.

  3. Exploration on the technology for ozone reduction in urban sewage treatment

    Science.gov (United States)

    Yang, Min; Sun, Yi; Han, Zhicheng; Liu, Jun

    2017-05-01

    With the rapid development of China’s economy, urban water consumption is increasing. However, sewage treatment plants will produce large amounts of sludge after treatment of sewage. Generally, and the sludge treatment costs are relatively high. Therefore, the problem about how to deal with the sewage sludge becomes the hot issues. Municipal waste water treatment plant produces a lot of sludge. This paper summarized the abroad study of ozonation minimization technology. Introduction and discussion were made on the principle of ozonated efficiency of sludge minimization, the efficiency of sludge minimization and the relationship between efficiency and ozone dosage, as well the effect of return sludge ozonated on waste water treatment running and the sludge setting and the dewatering characteristic. The economic estimation was also made on this technology. It’s showed that sludge minimization technology exhibits extensive application foreground.

  4. 支气管镜肺减容现状和展望%Current status and prospects of lung volume reduction surgery

    Institute of Scientific and Technical Information of China (English)

    孙沁莹; 林冰

    2013-01-01

    The application of lung volume reduction surgery (LVRS) in clinical practice is limited by high postoperative morbidity and stringent selection criteria. Bronchoscopic lung-volume reduction has recently been explored as safer alternatives to LVRS for treating advanced emphysema. The currently available data on efficacy of bronchoscopic lung volume reduction are not conclusive and subjective benefit in dyspnoea scores,6MWT distance (6MWD) ,quality of life (SCRQ) are more frequent findings than improvements on spirometry or exercise tolerance. Safety data are more promising with rare procedure-related mortality, short hospital length of stay and few complications such as COPD exacerbation, peumonia, pneumo-thorax. The field of bronrhoscopic lung volume reduction continues to evolve as ongoing prospective randomized trials build on earlier feasibility data to clarify the true efficacy of such techniques.%外科肺减容手术治疗重度肺气肿术后病死率较高,适应证少,不适宜临床推广.支气管镜肺减容术通过支气管镜下的技术操作,简便、安全,有望替代外科肺减容术治疗重度肺气肿.目前研究比较有效的方法有支气管腔内单向阀、生物胶、蒸汽消融和肺减容线圈.支气管镜肺减容术治疗重度肺气肿,可以明显改善气促指数、6 min步行距离及生活质量(SGRQ)评分等主观指标,但对于评价该项技术有效性的客观指标如肺功能指标及运动耐力仅有部分改善.采用该项技术安全性好,住院时间短,极少出现危及生命的严重并发症,可能出现的并发症包括慢性阻塞性肺疾病急性加重、肺炎和气胸.下一步需开展前瞻性的随机对照研究,证实支气管镜肺减容术的确切疗效.

  5. Information and Communication Technologies and Poverty Reduction in Developing Countries : the Case of Sub Saharan Africa countries

    Directory of Open Access Journals (Sweden)

    Lot Tcheeko

    2006-12-01

    Full Text Available There is a growing interest in using Information and Communication Technologies (ICTs to support poverty reduction efforts and strategies in the framework of the Millennium Development Goals (MDGs. These interest ended up revealing how much the Poverty Reduction Strategy Papers (PRSPs of many african nations have underestimated the importance of ICTs as a development tool. The fact that so little was mentionned about the use of ICTs for poverty alleviation and creation of employment highlighted the confusion, and uncertainty of decision makers. At the country level, ICT is still to be effectively integrated into national poverty alleviation and development strategies. The question then is how ICTs can help achieve those objectives. How can ICTs be used as tools to fight against poverty? Poverty is widely recognized as multidimensional, encompassing food security, health, education, rights, security and dignity, amongst others as stressed by Bachelor and al in a model showing the intricate linkages between ICTs and most PRSP goals. The link between ICTs and poverty reduction strategy is therefore not that obvious. Although, researchers and development partners involved in poverty alleviation recognize more easily the linkage between ICT and poverty reduction strategies. In any case, it is a prerequisite to have a conducive environment and country readiness for ICTs implementation. Unfortunately, in many Sub-Saharan Africa countries, there is not yet a clear and effective policy and strategy for the use of ICT.

  6. Variation in the measurement of cranial volume and surface area using 3D laser scanning technology.

    Science.gov (United States)

    Sholts, Sabrina B; Wärmländer, Sebastian K T S; Flores, Louise M; Miller, Kevin W P; Walker, Phillip L

    2010-07-01

    Three-dimensional (3D) laser scanner models of human crania can be used for forensic facial reconstruction, and for obtaining craniometric data useful for estimating age, sex, and population affinity of unidentified human remains. However, the use of computer-generated measurements in a casework setting requires the measurement precision to be known. Here, we assess the repeatability and precision of cranial volume and surface area measurements using 3D laser scanner models created by different operators using different protocols for collecting and processing data. We report intraobserver measurement errors of 0.2% and interobserver errors of 2% of the total area and volume values, suggesting that observer-related errors do not pose major obstacles for sharing, combining, or comparing such measurements. Nevertheless, as no standardized procedure exists for area or volume measurements from 3D models, it is imperative to report the scanning and postscanning protocols employed when such measurements are conducted in a forensic setting.

  7. Brazil - Poverty Reduction, Growth, and Fiscal Stability in the State of Ceara : A State Economic Memorandum, Volume 1. Policy Report

    OpenAIRE

    World Bank

    2000-01-01

    Although the State of Ceara, in Brazil, is a model of good economic, and fiscal performance given its poverty status, recent analysis show poverty remains severe, in spite of significant reductions over the last decade. The combination of good governance, and sound fiscal management, industrial promotion, and public investments have been successful, but the report questions whether differe...

  8. Echocardiographic image tracker with a speckle adaptive noise reduction filter for the automatic measurement of the left atrial volume curve.

    Science.gov (United States)

    Kusunose, Kenya; Chono, Tomoaki; Tabata, Tomotsugu; Yamada, Hirotsugu; Sata, Masataka

    2014-05-01

    Since tracking accuracy in left atrial (LA) images decreases due to low image quality around the LA in the apical view, a practical tracking method for LA images has not yet been proposed. The aim of this study was to assess an accurate and high-speed LA volume tracking (LAVT) method for the automatic measurement of LA volume (LAV) curves. We used three approved protocols in this study: (i) LAV curves were measured by LAVT on computer-simulated images; (ii) in 20 healthy volunteers, we assessed the feasibility and accuracy of this method compared with expert's measurements; and (iii) echocardiography and multi-detector row computed tomography (MDCT) imaging were performed on the same day in 20 patients with suspected coronary artery disease. On computer-simulated images, mean absolute percentage LAVT error in one cardiac cycle was 3% in filtered images and 16% in original images. In 20 healthy volunteers, there are strong correlations between LAVT and the expert's LA measurements (LA maximum volume; R = 0.93, P images with 20 patients, an excellent correlation was obtained between LAVs using echocardiography and MDCT (R = 0.98, P mean) and narrow limits of agreement (+15% of the mean). The mean time required for the LAVT analysis was 1.8 min, for the MDCT analysis was 35.8 min, and for the manual echocardiographic analysis was 14.0 min. This LAVT method is fast, valid, accurate, and reproducible for determining LAV in both simulated images and the clinical setting.

  9. Technology of high-level nuclear waste disposal. Advances in the science and engineering of the management of high-level nuclear wastes. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, P.L.; Breslin, J.J. (eds.)

    1981-01-01

    The papers in this volume cover the following subjects: waste isolation and the natural geohydrologic system; repository perturbations of the natural system; radionuclide migration through the natural system; and repository design technology. Individual papers are abstracted.

  10. Cryogenic Fluid Management Technology Workshop. Volume 1: Presentation material and discussion

    Science.gov (United States)

    Aydelott, John C. (Editor); Devol, William (Editor)

    1987-01-01

    The major objective of the workshop was to identify future NASA needs for technology that will allow the management of subcritical cryogenic fluids in the low gravity space environment. Workshop participants were asked to identify those technologies which will require in-space experimentation and are thus candidates for inclusion in the flight experiment being defined at the Lewis Research Center.

  11. Focus on Technology's Impact on Postsecondary Education. Network News. Volume 23, Number 1

    Science.gov (United States)

    L'Orange, Hans P., Ed.

    2004-01-01

    "Network News" provides an overview of technology's impact on postsecondary education. Particular attention is paid to recent studies looking at distance education and access. This issue contains the following articles: (1) New NCES Report: Distance Education at Degree-Granting Postsecondary Institutions 2000-2001; (2) How Does Technology Affect…

  12. The Objective Force Soldier/Soldier Team. Volume II - The Science and Technology Challenges

    Science.gov (United States)

    2001-11-01

    Number 703767-9007 DSN 427-9007 Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39.18 DISCLAIMER This report is the product of the Army Science...MOSAIC. Commercial technology air interfaces and protocols, such as CDMA , Bluetooth, and Personnel Data Assistants (PDAs) will provide technology

  13. The Integration of Technology into Treatment Programs to Aid in the Reduction of Chronic Pain

    Science.gov (United States)

    Eckard, Chad; Asbury, Caitlyn; Bolduc, Brandon; Camerlengo, Chelsea; Gotthardt, Julia; Healy, Lauren; Waialae, Laura; Zeigler, Ceirra; Childers, Jennifer; Horzempa, Joseph

    2017-01-01

    In the United States, roughly $600 billion is spent on pain management – usually in the form of addictive opioid drugs. Due to the dangers associated with long-term opiate-based pain medication, the development of additional strategies for chronic pain management is warranted. The advent of smartphones and associated technology has provided healthcare providers with a unique opportunity to provide pain management support. This review summarizes of the use of technology to supplement chronic pain management regimens. Smartphone and internet-based applications that employ online journals facilitate improved communication between patient and clinician and allow for more personalized care and improved pain management. For instance, the e-Ouch application provides a platform for pain logs as well as feedback and coaching to patients via Twitter postings and blogs. Other applications provide online resources and blogs to improve patient education, which has shown to relieve patient symptoms through lifestyle modification. Internet-delivered cognitive behavioral therapy (CBT) focuses on the psychological coping mechanisms. The application of technology and smartphone apps toward pain management shows promise toward reducing the use of opioids in pain management, but has yet to be incorporated as a standard practice. More robust studies critically evaluating the efficacy of these technology-based therapies need to be conducted before standardization and insurance coverage can become reality. PMID:28149962

  14. Can Information and Communications Technology Application Contribute to Poverty Reduction? Lessons from Nigeria

    Science.gov (United States)

    Toluyemi, Samuel Taiwo; Mejabi, Omenogo Veronica

    2011-01-01

    There is a growing optimism among international organizations such as United Nations Development Programme (UNDP) that Information and Communication Technology (ICT) can transform developing countries such as Nigeria to developed ones in a relatively short time. Experiences from Asian and European countries such as India, Bangladesh, Malaysia,…

  15. Can Information and Communications Technology Application Contribute to Poverty Reduction? Lessons from Nigeria

    Science.gov (United States)

    Toluyemi, Samuel Taiwo; Mejabi, Omenogo Veronica

    2011-01-01

    There is a growing optimism among international organizations such as United Nations Development Programme (UNDP) that Information and Communication Technology (ICT) can transform developing countries such as Nigeria to developed ones in a relatively short time. Experiences from Asian and European countries such as India, Bangladesh, Malaysia,…

  16. Mixed and low-level waste treatment facility project. Volume 3, Waste treatment technologies (Draft)

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    The technology information provided in this report is only the first step toward the identification and selection of process systems that may be recommended for a proposed mixed and low-level waste treatment facility. More specific information on each technology will be required to conduct the system and equipment tradeoff studies that will follow these preengineering studies. For example, capacity, maintainability, reliability, cost, applicability to specific waste streams, and technology availability must be further defined. This report does not currently contain all needed information; however, all major technologies considered to be potentially applicable to the treatment of mixed and low-level waste are identified and described herein. Future reports will seek to improve the depth of information on technologies.

  17. Technology priorities for transport in Asia: assessment of economy-wide CO2 emissions reduction for Lebanon

    DEFF Research Database (Denmark)

    Dhar, Subash; Marpaung, Charles O. P.

    2015-01-01

    mitigations actions (NAMA) given their strong contribution for development and therefore a methodology based on in-put out-put decomposition analysis is proposed for analysing economy wide CO2 emissions reductions. The methodology has been applied for the transport sector of Lebanon where alternative fuels......,improvement to cars (private and taxis) and buses for public transport were prioritized by stakeholders. The economy-wide CO2 emission reduce by 2,269 thousand tons by 2020 if the prioritized technologies are implemented in Lebanon. Fuel mix effect and structural effect would reduce CO2 emission by 2,611 thousand...

  18. Microwave Sintering of W-15Cu Ultrafine Composite Powder Prepared by Spray Drying & Calcining-continuous Reduction Technology

    Institute of Scientific and Technical Information of China (English)

    SHU Jingping; SHI Xiaoliang; WANG Shuwei; YANG Xingyong; ZHANG Qiaoxin; WANG Yufu

    2011-01-01

    The effects of microwave sintering and conventional H2 sintering on the microstructure and properties of W-l5Cu alloy using ultrafine W-15Cu composite powder fabricated by spray drying & calcining-continuous reduction technology were investigated. In comparison to the conventional H2 sintering processing, microwave sintefing to W-15Cu can be achieved at lower sintefing temperature and shorter sintering time. Furthermore, higher performances in microwave sintered compacts were obtained, but high microwave sintering temperature or long microwave sintering time could result in coarser microstructures.

  19. 28. annual offshore technology conference: Proceedings. Volume 3: Construction and installation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The 32 papers in this volume cover the following topics: Gulf of Mexico developments -- Popeye and SeaStar; Materials, utilization and fabrication; Mooring and station keeping; Offshore pipelines; and Platform installation. Most papers have been processed separately for inclusion on the data base.

  20. Low-rank coal research: Volume 2, Advanced research and technology development: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Mann, M.D.; Swanson, M.L.; Benson, S.A.; Radonovich, L.; Steadman, E.N.; Sweeny, P.G.; McCollor, D.P.; Kleesattel, D.; Grow, D.; Falcone, S.K.

    1987-04-01

    Volume II contains articles on advanced combustion phenomena, combustion inorganic transformation; coal/char reactivity; liquefaction reactivity of low-rank coals, gasification ash and slag characterization, and fine particulate emissions. These articles have been entered individually into EDB and ERA. (LTN)

  1. Seismic design technology for breeder reactor structures. Volume 4. Special topics in piping and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into five chapters: experimental verification of piping systems, analytical verification of piping restraint systems, seismic analysis techniques for piping systems with multisupport input, development of floor spectra from input response spectra, and seismic analysis procedures for in-core components. (DLC)

  2. Seismic design technology for breeder reactor structures. Volume 4. Special topics in piping and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into five chapters: experimental verification of piping systems, analytical verification of piping restraint systems, seismic analysis techniques for piping systems with multisupport input, development of floor spectra from input response spectra, and seismic analysis procedures for in-core components. (DLC)

  3. Characterization of alternative electric generation technologies for the SPS comparative assessment: volume 2, central-station technologies

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The SPS Concept Development and Evaluation Program includes a comparative assessment. An early first step in the assessment process is the selection and characterization of alternative technologies. This document describes the cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives: (1) conventional coal-fired powerplant; (2) conventional light water reactor (LWR); (3) combined cycle powerplant with low-Btu gasifiers; (4) liquid metal fast breeder reactor (LMFBR); (5) photovoltaic system without storage; and (6) fusion reactor.

  4. Analytical challenges of determining composition and structure in small volumes with applications to semiconductor technology, nanostructures and solid state science

    Science.gov (United States)

    Ma, Zhiyong; Kuhn, Markus; Johnson, David C.

    2017-03-01

    Determining the structure and composition of small volumes is vital to the ability to understand and control nanoscale properties and critical for advancing both fundamental science and applications, such as semiconductor device manufacturing. While metrology of nanoscale materials (nanoparticles, nanocomposites) and nanoscale semiconductor structures is challenging, both basic research and cutting edge technology benefit from new and enhanced analytical techniques. This focus issue contains articles describing approaches to overcome the challenges in obtaining statistically significant atomic-scale quantification of structure and composition in a variety of materials and devices using electron microscopy and atom probe tomography.

  5. Assessment of Current and Future Air Pollutant Emission Reduction Technologies for Marine Diesel Engines

    Science.gov (United States)

    2014-02-01

    sulphur present in fuel: the less sulphur content in the fuel, the less SOx in the exhaust. SOx cause acid rain and SOx oxidation in the atmosphere...gases contain gaseous sulphur species that form sulphuric acid , causing corrosion problems [9]. Presentations to the cruise industry in 2009 by MAN...emerging. Most of the air pollutant emission control technologies focus on reducing concentration of nitrogen oxides (NOx), sulphur oxides (SOx), or

  6. Use of modern and clean coal technologies for reduction of greenhouse gas emissions

    Energy Technology Data Exchange (ETDEWEB)

    Popescu, A.; Lavrov, G.; Costea, D. [Institutul de Stuidii Si Proiectari Energetice S.A. (ISPE), Bucharest (Hungary)

    2002-07-01

    Cleaner coal technologies are available now to reduce emissions. After an introductory paragraph, the paper presents a summary of the 'green taxes' on CO{sub 2} emissions and energy use in Europe and the OECD. It then explores the influence of CO{sub 2} taxes on the expansion plan of capacities for power generation in Romania. 1 ref., 1 tab.

  7. Analysis of technological and competitive trends of weight reduction in high speed rolling stock industry

    OpenAIRE

    Prieto Moneo, Álvaro

    2016-01-01

    The incorporation to the transport of passengers sector of the high speed industry is preceded by a global society, which requires the possibility to travel quickly, comfortably and efficiently, imposing the current attitude of the concern with the environment. The development of the rail sector over recent decades, and especially in recent years, along with the technological development has allowed the formation of a network of high speed lines around the greatest part of the planet. Due...

  8. A new technology for the reduction of particulate matter from diesel engines in ships

    OpenAIRE

    Van Rens, G.L.M.A.

    2008-01-01

    In this thesis the focus is on the particulate matter reduction of ships, as ships contribute significantly to the particulate matter concentration in ambient air. Because the fuel of sea ships contains a lot of ash, the emitted particulate matter will also contain a lot of ash. In car and truck applications the soot filters are cleaned by burning the particulate matter off of the filter. However, ash will not be burned off and accumulates in the filter. In the case of high-ash loads, like se...

  9. Investigation of Sawmill Management and Technology on Waste Reduction at Selected Sawmills in Moratuwa, Sri Lanka

    Directory of Open Access Journals (Sweden)

    H.T.S. Caldera

    2015-09-01

    Full Text Available The demand for sawn timber and wood-based products is rising steadily with new developments and the growing domestic consumption in Sri Lanka. Therefore, it is important to strike a balance between the increasing demand and consumption of forest resources. Thus, the key objective of this study was to investigate the effects of sawmill management and technological parameters on loss in conversion from logs to sawn timber and to compare the sawmill efficiency in private sawmills with the state timber corporation sawmill.Sawmill management and technological parameters were studied in 21 private sawmills and State Timber Corporation sawmill in Kaldemulla to evaluate the effects on loss in conversion. The selected sawmills represent all types available in Sri Lanka, i.e., frame saw, circular saw and band saw mills. Based on the results, mean percentage loss in conversion of teak and mahogany timber for all sawmills (private and State Timber Corporation in Moratuwa found to be 53.10%. Significant differences were observed in loss in conversion values between the three categories of private sawmills as well as within sawmills of the same category. It was shown that loss in conversion values also varied with sawmill management and technological parameters such as type of machinery employed, sharpening frequency and sawyer’s experience, saw setting, availability of log alignment equipment and saw guards, oversizing and sawn timber sizes.

  10. Archaeal community structure in leachate and solid waste is correlated to methane generation and volume reduction during biodegradation of municipal solid waste.

    Science.gov (United States)

    Fei, Xunchang; Zekkos, Dimitrios; Raskin, Lutgarde

    2015-02-01

    Duplicate carefully-characterized municipal solid waste (MSW) specimens were reconstituted with waste constituents obtained from a MSW landfill and biodegraded in large-scale landfill simulators for about a year. Repeatability and relationships between changes in physical, chemical, and microbial characteristics taking place during the biodegradation process were evaluated. Parameters such as rate of change of soluble chemical oxygen demand in the leachate (rsCOD), rate of methane generation (rCH4), rate of specimen volume reduction (rVt), DNA concentration in the leachate, and archaeal community structures in the leachate and solid waste were monitored during operation. The DNA concentration in the leachate was correlated to rCH4 and rVt. The rCH4 was related to rsCOD and rVt when waste biodegradation was intensive. The structures of archaeal communities in the leachate and solid waste of both simulators were very similar and Methanobacteriaceae were the dominant archaeal family throughout the testing period. Monitoring the chemical and microbial characteristics of the leachate was informative of the biodegradation process and volume reduction in the simulators, suggesting that leachate monitoring could be informative of the extent of biodegradation in a full-scale landfill.

  11. Emerging Technologies Program Integration Report. Volume 2. Background, Delphi and Workshop Data. Appendices

    Science.gov (United States)

    1987-05-04

    models for specific a;plication domains. --Need experience with specific applications that will push the hardware/ .’ software/conceptual resources...militaryf impact of this technology: A. How might the tecnology in question change US military capabilities? Diminish days lost due to common viral...capability. To achieve necessary goals will require pushing of 7m1 wave tube, solid state device and antenna technologies. Oirk R. Klose . REPORTER: AV 995

  12. Technology assessment of future intercity passenger transportation systems. Volume 6: Impact assessment

    Science.gov (United States)

    1976-01-01

    Consequences that might occur if certain technological developments take place in intercity transportation are described. These consequences are broad ranging, and include economic, environmental, social, institutional, energy-related, and transportation service implications. The possible consequences are traced through direct (primary) impacts to indirect (secondary, tertiary, etc.) impacts. Chains of consequences are traced, reaching as far beyond the original transportation cause as is necessary to identify all impacts felt to be influenced significantly by the technological development considered.

  13. Challenge study of the pathogen reduction capacity of the THERAFLEX MB-Plasma technology.

    Science.gov (United States)

    Reichenberg, S; Gravemann, U; Sumian, C; Seltsam, A

    2015-08-01

    Although most pathogen reduction systems for plasma primarily target viruses, bacterial contamination may also occur. This study aimed to investigate the bacterial reduction capacity of a methylene blue (MB) treatment process and its virus inactivation capacity in lipaemic plasma. Bacterial concentrations in plasma units spiked with different bacterial strains were measured before and after the following steps of the THERAFLEX MB-Plasma procedure: leucocyte filtration, MB/light treatment and MB filtration. Virus inactivation was investigated for three virus types in non-lipaemic, borderline lipaemic and highly lipaemic plasma. Leucocyte filtration alone efficiently eliminated most of the tested bacteria by more than 4 logs (Staphylococcus epidermidis and Staphylococcus aureus) or to the limit of detection (LOD) (≥ 4.8 logs; Escherichia coli, Bacillus cereus and Klebsiella pneumoniae). MB/light and MB filtration further reduced Staphylococcus epidermidis and Staphylococcus aureus to below the LOD. The small bacterium Brevundimonas diminuta was reduced by 1.7 logs by leucocyte filtration alone, and to below the LOD by additional MB/light treatment and MB filtration (≥ 3.7 logs). Suid herpesvirus 1, bovine viral diarrhoea virus and human immunodeficiency virus 1 were efficiently inactivated by THERAFLEX MB-Plasma, independent of the degree of lipaemia. THERAFLEX MB-Plasma efficiently reduces bacteria, mainly via the integrated filtration system. Its virus inactivation capacity is sufficient to compensate for reduced light transparency due to lipaemia. © 2015 International Society of Blood Transfusion.

  14. High-volume extraction of nucleic acids by magnetic bead technology for ultrasensitive detection of bacteria in blood components.

    Science.gov (United States)

    Störmer, Melanie; Kleesiek, Knut; Dreier, Jens

    2007-01-01

    Nucleic acid isolation, the most technically demanding and laborious procedure performed in molecular diagnostics, harbors the potential for improvements in automation. A recent development is the use of magnetic beads covered with nucleic acid-binding matrices. We adapted this technology with a broad-range 23S rRNA real-time reverse transcription (RT)-PCR assay for fast and sensitive detection of bacterial contamination of blood products. We investigated different protocols for an automated high-volume extraction method based on magnetic-separation technology for the extraction of bacterial nucleic acids from platelet concentrates (PCs). We added 2 model bacteria, Staphylococcus epidermidis and Escherichia coli, to a single pool of apheresis-derived, single-donor platelets and assayed the PCs by real-time RT-PCR analysis with an improved primer-probe system and locked nucleic acid technology. Co-amplification of human beta(2)-microglobulin mRNA served as an internal control (IC). We used probit analysis to calculate the minimum concentration of bacteria that would be detected with 95% confidence. For automated magnetic bead-based extraction technology with the real-time RT-PCR, the 95% detection limit was 29 x 10(3) colony-forming units (CFU)/L for S. epidermidis and 22 x 10(3) CFU/L for E. coli. No false-positive results occurred, either due to nucleic acid contamination of reagents or externally during testing of 1030 PCs. High-volume nucleic acid extraction improved the detection limit of the assay. The improvement of the primer-probe system and the integration of an IC make the RT-PCR assay appropriate for bacteria screening of platelets.

  15. Survey of Technology with Possible Applications to United States Coast Guard Buoy Tenders. Volume 1. Technology Assessment.

    Science.gov (United States)

    1987-09-01

    performance. Zig - zag tests show SWATH ships have half the overshoot of conventional ships. At slow speeds, the widely separated propulsion units aid...Ii S2 2-13 C, Lb 0 00 2-14 ’rkpl I% -W N~ louw W ME ’ K’.MM w~~b Af’- w~t W pw -.J 1 W ’W SS U. C ’U . 2-15 Mill ll WRII9PqWWmWIK"-wPFll7TW W.F K...Evaluation of a Compound Cycle Engine for Shipboard Gensets," Report No. DTNSRDC-PASD-CR-1886. 6.19 Mills , R.G., "Innovative Technology on Steam

  16. Building Technology Forecast and Evaluation (BTFE). Volume 2. Evaluation of Two Structural Systems

    Science.gov (United States)

    1990-11-01

    are all one piece of formwork , erected and stripped as a single unit. Use of half or full tunnels depends on the room width, form weight, and crane...expected to be good. 1.3 Formwork / Tunnel lorms are metal sheets and are E Temporary designed adequately; scaffolding is Supports used as required. 1.4...structural systems with potential advantage to the U.S. Army Corps of Engineers (USACE): tunnel forming systems and composite panellzed systems. Volume 11

  17. Digital Systems Validation Handbook. Volume 2. Chapter 18. Avionic Data Bus Integration Technology

    Science.gov (United States)

    1993-11-01

    U.S. Department of Transportation PFe 1rs Aviation Administration DOT/FAA/CT-88/10 HANDBOOK- VOLUME H DIGITAL SYSTEMS VALIDATION - CHAPTER 18 tw...18-29 improve identification, control, and auditing of software. SCM and SQA methods in RTCA/DO-178A are drawn directly from proven methods of hardware...procedures, and practices; reviews and audits ; configuration management; medium control; testing; supplier control; and appropriate records. A brief

  18. Advances on Propulsion Technology for High-Speed Aircraft. Volume 2

    Science.gov (United States)

    2007-03-01

    drag, or cruise. As the prime contractor for NASA, ATK GASL had the unique perspective of seeing the complete program from start to finish. Although... prime contractor to NASA for the execution of the program and had overall responsibility for the detailed design and manufacture and support to flight...Digest, Volume 26, Number 4 (2005) [9] 9 Tyll, J., Erdos , J., Bakos, R., Low-Cost Free-Flight Testing of Hypersonic Airbreathing I Engines, ISOABE 2001

  19. Social networking technology, social network composition, and reductions in substance use among homeless adolescents.

    Science.gov (United States)

    Rice, Eric; Milburn, Norweeta G; Monro, William

    2011-03-01

    Peer-based prevention programs for homeless youth are complicated by the potential for reinforcing high-risk behaviors among participants. The goal of this study is to understand how homeless youth could be linked to positive peers in prevention programming by understanding where in social and physical space positive peers for homeless youth are located, how these ties are associated with substance use, and the role of social networking technologies (e.g., internet and cell phones) in this process. Personal social network data were collected from 136 homeless adolescents in Los Angeles, CA. Respondents reported on composition of their social networks with respect to: home-based peers and parents (accessed via social networking technology; e.g., the internet, cell phone, texting), homeless peers and agency staff (accessed face-to-face) and whether or not network members were substance-using or non-substance-using. Associations between respondent's lifetime cocaine, heroin, and methamphetamine use and recent (previous 30 days) alcohol and marijuana use were assessed by the number of non-substance-using versus substance-using ties in multivariate linear regression models. 43% of adolescents reported a non-substance-using home-based tie. More of these ties were associated with less recent alcohol use. 62% of adolescents reported a substance-using homeless tie. More of these ties were associated with more recent marijuana use as well as more lifetime heroin and methamphetamine use. For homeless youth, who are physically disconnected from positive peers, social networking technologies can be used to facilitate the sorts of positive social ties that effective peer-based prevention programs require.

  20. Science and Technology Networks : A Helping Hand to Boost Implementation of the Sendai Framework for Disaster Risk Reduction 2015–2030?

    NARCIS (Netherlands)

    Trogrlić, RobertŠakić; Cumiskey, Lydia; Triyanti, Annisa; Duncan, Melanie J.; Eltinay, Nuha; Hogeboom, Rick J.; Jasuja, Mansi; Meechaiya, Chinaporn; Pickering, Christina J.; Murray, Virginia

    2017-01-01

    The Sendai Framework for Disaster Risk Reduction 2015–2030 underlines the importance of Science and Technology (S&T) and S&T networks for effective disaster risk reduction (DRR). The knowledge of existing S&T networks and their exact role in DRR, however, is limited. This opinion piece initiates a d

  1. The Use of Assessment Center Technology for the Prevention and Reduction of Professional Burnout

    Directory of Open Access Journals (Sweden)

    Stalnova I.A.,

    2014-08-01

    Full Text Available Dynamism of professional activity, increasing workload and working time shortage, high social responsibility for results and other factors increase the probability of formation of burnout in government employees. This actualizes the search for new forms and methods of professional qualification of government employees based on an assessment of their psychological qualities. We discuss the problem of professional and personal burnout in Rosreestr employees, reveal the symptoms of this syndrome. As a tool for preventing and reducing the negative impact of professional deformation in Rosreestr workers, we propose the use of assessment center technology successfully tested in the international practice and requiring adaptation to Russian realities.

  2. Improvements in Boron Plate Coating Technology for Higher Efficiency Neutron Detection and Coincidence Counting Error Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Menlove, Howard Olsen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Henzlova, Daniela [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-25

    This informal report presents the measurement data and information to document the performance of the advanced Precision Data Technology, Inc. (PDT) sealed cell boron-10 plate neutron detector that makes use of the advanced coating materials and procedures. In 2015, PDT changed the boron coating materials and application procedures to significantly increase the efficiency of their basic corrugated plate detector performance. A prototype sealed cell unit was supplied to LANL for testing and comparison with prior detector cells. Also, LANL had reference detector slabs from the original neutron collar (UNCL) and the new Antech UNCL with the removable 3He tubes. The comparison data is presented in this report.

  3. Maximum likelihood estimate of life expectancy in the prehistoric Jomon: Canine pulp volume reduction suggests a longer life expectancy than previously thought.

    Science.gov (United States)

    Sasaki, Tomohiko; Kondo, Osamu

    2016-09-01

    Recent theoretical progress potentially refutes past claims that paleodemographic estimations are flawed by statistical problems, including age mimicry and sample bias due to differential preservation. The life expectancy at age 15 of the Jomon period prehistoric populace in Japan was initially estimated to have been ∼16 years while a more recent analysis suggested 31.5 years. In this study, we provide alternative results based on a new methodology. The material comprises 234 mandibular canines from Jomon period skeletal remains and a reference sample of 363 mandibular canines of recent-modern Japanese. Dental pulp reduction is used as the age-indicator, which because of tooth durability is presumed to minimize the effect of differential preservation. Maximum likelihood estimation, which theoretically avoids age mimicry, was applied. Our methods also adjusted for the known pulp volume reduction rate among recent-modern Japanese to provide a better fit for observations in the Jomon period sample. Without adjustment for the known rate in pulp volume reduction, estimates of Jomon life expectancy at age 15 were dubiously long. However, when the rate was adjusted, the estimate results in a value that falls within the range of modern hunter-gatherers, with significantly better fit to the observations. The rate-adjusted result of 32.2 years more likely represents the true life expectancy of the Jomon people at age 15, than the result without adjustment. Considering ∼7% rate of antemortem loss of the mandibular canine observed in our Jomon period sample, actual life expectancy at age 15 may have been as high as ∼35.3 years. © 2016 Wiley Periodicals, Inc.

  4. Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 1

    Science.gov (United States)

    Greenburg, J. S.; Gaelick, C.; Kaplan, M.; Fishman, J.; Hopkins, C.

    1985-01-01

    Commercial organizations as well as government agencies invest in spacecraft (S/C) technology programs that are aimed at increasing the performance of communications satellites. The value of these programs must be measured in terms of their impacts on the financial performane of the business ventures that may ultimately utilize the communications satellites. An economic evaluation and planning capability was developed and used to assess the impact of NASA on-orbit propulsion and space power programs on typical fixed satellite service (FSS) and direct broadcast service (DBS) communications satellite business ventures. Typical FSS and DBS spin and three-axis stabilized spacecraft were configured in the absence of NASA technology programs. These spacecraft were reconfigured taking into account the anticipated results of NASA specified on-orbit propulsion and space power programs. In general, the NASA technology programs resulted in spacecraft with increased capability. The developed methodology for assessing the value of spacecraft technology programs in terms of their impact on the financial performance of communication satellite business ventures is described. Results of the assessment of NASA specified on-orbit propulsion and space power technology programs are presented for typical FSS and DBS business ventures.

  5. Study of power management technology for orbital multi-100KWe applications. Volume 3: Requirements

    Science.gov (United States)

    Mildice, J. W.

    1980-01-01

    Mid to late 1980's power management technology needs to support development of a general purpose space platform, capable of suplying 100 to 250 KWe to a variety of users in low Earth orbit are examined. A typical, shuttle assembled and supplied space platform is illustred, along with a group of payloads which might reasonably be expected to use such a facility. Examination of platform and user power needs yields a set of power requirements used to evaluate power management options for life cycle cost effectivness. The most cost effective ac/dc and dc systems are evaluated, specifically to develop system details which lead to technology goals, including: array and transmission voltages, best frequency for ac power transmission, and advantages and disadvantages of ac and dc systems for this application. System and component requirements are compared with the state-of-the-art to identify areas where technological development is required.

  6. Advanced Processing Technology semiannual report, March--December 1991. Volume 1, Number 1

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, M.; Kline-Simon, K. [eds.

    1991-12-31

    This first issue of the APT Semiannual Report focuses on APT`s defense-related technologies. These technologies are a continuation of the research, development, and engineering work performed by LLNLs Special Isotope Separation (SIS) Program. SIS was the first large-scale DOE venture that had environmentally conscious manufacturing processes and facilities as its deliverables. The objectives were to create a facility where the only outputs were either usable products or disposable wastes, and to comply with existing and anticipated federal, state, and local regulations related to safeguards, security, health and safety. To meet these objectives, revolutionary changes were needed in plutonium processing operations, chemistry, and equipment. New processes had to be developed that enhanced worker safety, minimized operator radiation dose, minimized waste at the point of generation, and provided for built-in recycling of residues. The SIS Program developed and demonstrated the technology (both chemistry and physics) necessary to provide plutonium with individual isotopic tailoring. This process made it possible to transform fuel-grade plutonium into weapon-grade material. However, due to the changing world political climate, the country`s need for plutonium to make new weapons has decreased dramatically. As a result, the planned SIS plutonium-separation plant will not be built. After the SIS Program was canceled in 199 1, Congress directed that the plutonium processing technologies under development for the SIS Program be redirected to the weapons program. APT took over the development of the innovative SIS technologies and is applying them to the development of a new, reconfigured Nuclear Weapons Complex -- Complex 21. ``Close Out of the SIS Program`` describes the completion of the SIS research and development work, and the transfer of key technologies to support this reconfiguration effort.

  7. Advanced Processing Technology semiannual report, March--December 1991. Volume 1, Number 1

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, M.; Kline-Simon, K. [eds.

    1991-12-31

    This first issue of the APT Semiannual Report focuses on APT`s defense-related technologies. These technologies are a continuation of the research, development, and engineering work performed by LLNLs Special Isotope Separation (SIS) Program. SIS was the first large-scale DOE venture that had environmentally conscious manufacturing processes and facilities as its deliverables. The objectives were to create a facility where the only outputs were either usable products or disposable wastes, and to comply with existing and anticipated federal, state, and local regulations related to safeguards, security, health and safety. To meet these objectives, revolutionary changes were needed in plutonium processing operations, chemistry, and equipment. New processes had to be developed that enhanced worker safety, minimized operator radiation dose, minimized waste at the point of generation, and provided for built-in recycling of residues. The SIS Program developed and demonstrated the technology (both chemistry and physics) necessary to provide plutonium with individual isotopic tailoring. This process made it possible to transform fuel-grade plutonium into weapon-grade material. However, due to the changing world political climate, the country`s need for plutonium to make new weapons has decreased dramatically. As a result, the planned SIS plutonium-separation plant will not be built. After the SIS Program was canceled in 199 1, Congress directed that the plutonium processing technologies under development for the SIS Program be redirected to the weapons program. APT took over the development of the innovative SIS technologies and is applying them to the development of a new, reconfigured Nuclear Weapons Complex -- Complex 21. ``Close Out of the SIS Program`` describes the completion of the SIS research and development work, and the transfer of key technologies to support this reconfiguration effort.

  8. Volume reduction and conditioning campaigns, upon low level solid waste drums, realised in ENEA centres of Trisaia (ITREC plant) and Saluggia (EUTREX plant); Campagne di trattamento di rifiuti radioattivi solidi a bassa attivita` provenienti dagli impianti pilota di ritrattamento EUREX ed ITREC dell`ENEA

    Energy Technology Data Exchange (ETDEWEB)

    Gili, M. [ENEA, Saluggia (Italy). Dipt. Energia

    1995-09-15

    The volume reduction and conditioning campaigns, upon low level solid waste drums, realized between 1989 and 1993 in the ENEA (Italian Agency for New Technologies, Energy and the Environment) centres of Trisaia (ITREC plant) and Saluggia (EUREX plant), by the mean of supercompactation, and cement immobilization inside over packs, are hereby described. The operational techniques and the equipments used, the whole volume reduction factors obtained and some final considerations over this solid rad wastes treatment procedure are shown. This method, where correctly operated and coupled to an accurate radiological characterization, permits to save space for the waste storage in the short period and to obtain final manufacts, certified suitable for shallow burial disposal, according to Italian technical guide no. 26.

  9. Technology assessment of solar energy systems. Scenario development and methodology. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Schiffman, Y.M.

    1981-07-01

    Included are a general overview of the Technology Assessment of Solar Energy systems (TASE) project and a description of the study approach, the development of the TASE scenarios, energy and environmental assumptions, and assumptions and forecasts of the FOSSIL2 National Energy Model upon which the TASE scenarios were based. The Strategic Environmental Assessment System (SEAS) model was used to generate the analytical data base for TASE. Improvements made to SEAS to allow it to model solar and biomass energy technologies are also described.

  10. Shuttle Ground Operations Efficiencies/Technologies Study (SGOE/T). Volume 5: Technical Information Sheets (TIS)

    Science.gov (United States)

    Scholz, A. L.; Hart, M. T.; Lowry, D. J.

    1987-01-01

    The Technology Information Sheet was assembled in database format during Phase I. This document was designed to provide a repository for information pertaining to 144 Operations and Maintenance Instructions (OMI) controlled operations in the Orbiter Processing Facility (OPF), Vehicle Assembly Building (VAB), and PAD. It provides a way to accumulate information about required crew sizes, operations task time duration (serial and/or parallel), special Ground Support Equipment (GSE). required, and identification of a potential application of existing technology or the need for the development of a new technolgoy item.

  11. Fiscal years 1994--1998 Information Technology Strategic Plan. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    A team of senior managers from across the US Nuclear Regulatory Commission (NRC), working with the Office of Information Resources Management (IRM), has completed an NRC Strategic Information Technology (IT) Plan. The Plan addresses three major areas: (1) IT Program Management, (2) IT Infrastructure, and (3) Information and Applications Management. Key recommendations call for accelerating the replacement of Agency workstations, implementing a new document management system, applying business process reengineering to selected Agency work processes, and establishing an Information Technology Council to advise the Director of IRM.

  12. Aerodynamic Drag Reduction Technologies Testing of Heavy-Duty Vocational Vehicles and a Dry Van Trailer

    Energy Technology Data Exchange (ETDEWEB)

    Ragatz, Adam [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thornton, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-10-01

    This study focused on two accepted methods for quantifying the benefit of aerodynamic improvement technologies on vocational vehicles: the coastdown technique, and on-road constant speed fuel economy measurements. Both techniques have their advantages. Coastdown tests are conducted over a wide range in speed and allow the rolling resistance and aerodynamic components of road load force to be separated. This in turn allows for the change in road load and fuel economy to be estimated at any speed, as well as over transient cycles. The on-road fuel economy measurements only supply one lumped result, applicable at the specific test speed, but are a direct measurement of fuel usage and are therefore used in this study as a check on the observed coastdown results. Resulting coefficients were then used to populate a vehicle model and simulate expected annual fuel savings over real-world vocational drive cycles.

  13. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Melting Efficiency Improvement

    Energy Technology Data Exchange (ETDEWEB)

    Principal Investigator Kent Peaslee; Co-PI’s: Von Richards, Jeffrey Smith

    2012-07-31

    Steel foundries melt recycled scrap in electric furnaces and typically consume 35-100% excess energy from the theoretical energy requirement required to pour metal castings. This excess melting energy is multiplied by yield losses during casting and finishing operations resulting in the embodied energy in a cast product typically being three to six times the theoretical energy requirement. The purpose of this research project was to study steel foundry melting operations to understand energy use and requirements for casting operations, define variations in energy consumption, determine technologies and practices that are successful in reducing melting energy and develop new melting techniques and tools to improve the energy efficiency of melting in steel foundry operations.

  14. Dead space reduction by Kolobow's endotracheal tube does not justify the waiving of volume monitoring in small, ventilated lungs.

    Science.gov (United States)

    Proquitté, Hans; Wendel, Rena; Roehr, Charles C; Wauer, Roland R; Schmalisch, Gerd

    2014-12-01

    In ventilated preterm infants the flow sensor contributes significantly to the total apparatus dead space, which may impair gas exchange. The aim of the study was to quantify to which extent a dead space reduced Kolobow tube (KB) without flow sensor improves the gas exchange compared with a conventional ventilator circuit with flow sensor [Babylog 8000 (BL)]. In a cross-over trial in 14 tracheotomized, surfactant-depleted (saline lavage) and mechanically ventilated newborn piglets (age space of BL and KB including the endotracheal tube were 3.0 and 1.34 mL. Despite a 50 % apparatus dead space reduction with KB compared to BL statistically significant improvements were only observed for body weights monitoring.

  15. Feasibility Study for the Establishment of a Pharmacy Technology Program. Volume 11, Number 8.

    Science.gov (United States)

    Bourke, Patricia G.; And Others

    In December 1980, a study was conducted by William Rainey Harper College (WRHC) to determine the feasibility of establishing a pharmacy technology program. Professional Life Science and Human Services staff members telephoned 13 hospital pharmacies and four retail pharmacies in WRHC's service area. It was felt that if the 15 responding pharmacies…

  16. Handbook of Research on Technology Tools for Real-World Skill Development (2 Volumes)

    Science.gov (United States)

    Rosen, Yigel, Ed.; Ferrara, Steve, Ed.; Mosharraf, Maryam, Ed.

    2016-01-01

    Education is expanding to include a stronger focus on the practical application of classroom lessons in an effort to prepare the next generation of scholars for a changing world economy centered on collaborative and problem-solving skills for the digital age. "The Handbook of Research on Technology Tools for Real-World Skill Development"…

  17. Sandia technology. Volume 13, number 2 Special issue : verification of arms control treaties.

    Energy Technology Data Exchange (ETDEWEB)

    1989-03-01

    Nuclear deterrence, a cornerstone of US national security policy, has helped prevent global conflict for over 40 years. The DOE and DoD share responsibility for this vital part of national security. The US will continue to rely on nuclear deterrence for the foreseeable future. In the late 1950s, Sandia developed satellite-borne nuclear burst detection systems to support the treaty banning atmospheric nuclear tests. This activity has continued to expand and diversify. When the Non-Proliferation Treaty was ratified in 1970, we began to develop technologies to protect nuclear materials from falling into unauthorized hands. This program grew and now includes systems for monitoring the movement and storage of nuclear materials, detecting tampering, and transmiting sensitive data securely. In the late 1970s, negotiations to further limit underground nuclear testing were being actively pursued. In less than 18 months, we fielded the National Seismic Station, an unattended observatory for in-country monitoring of nuclear tests. In the mid-l980s, arms-control interest shifted to facility monitoring and on-site inspection. Our Technical On-site Inspection Facility is the national test bed for perimeter and portal monitoring technology and the prototype for the inspection portal that was recently installed in the USSR under the Intermediate-Range Nuclear Forces accord. The articles in the special issue of Sundiu Technology describe some of our current contributions to verification technology. This work supports the US policy to seek realistic arms control agreements while maintaining our national security.

  18. Global Journal of Computer Science and Technology. Volume 1.2

    Science.gov (United States)

    Dixit, R. K.

    2009-01-01

    Articles in this issue of "Global Journal of Computer Science and Technology" include: (1) Input Data Processing Techniques in Intrusion Detection Systems--Short Review (Suhair H. Amer and John A. Hamilton, Jr.); (2) Semantic Annotation of Stock Photography for CBIR Using MPEG-7 standards (R. Balasubramani and V. Kannan); (3) An Experimental Study…

  19. Handbook of Research on Technology Tools for Real-World Skill Development (2 Volumes)

    Science.gov (United States)

    Rosen, Yigel, Ed.; Ferrara, Steve, Ed.; Mosharraf, Maryam, Ed.

    2016-01-01

    Education is expanding to include a stronger focus on the practical application of classroom lessons in an effort to prepare the next generation of scholars for a changing world economy centered on collaborative and problem-solving skills for the digital age. "The Handbook of Research on Technology Tools for Real-World Skill Development"…

  20. Energy Saving Melting and Revert Reduction Technology: Aging of Graphitic Cast Irons and Machinability

    Energy Technology Data Exchange (ETDEWEB)

    Richards, Von L. [Advanced Technology Inst., Virginia Beach, VA (United States)

    2012-09-19

    The objective of this task was to determine whether ductile iron and compacted graphite iron exhibit age strengthening to a statistically significant extent. Further, this effort identified the mechanism by which gray iron age strengthens and the mechanism by which age-strengthening improves the machinability of gray cast iron. These results were then used to determine whether age strengthening improves the machinability of ductile iron and compacted graphite iron alloys in order to develop a predictive model of alloy factor effects on age strengthening. The results of this work will lead to reduced section sizes, and corresponding weight and energy savings. Improved machinability will reduce scrap and enhance casting marketability. Technical Conclusions: Age strengthening was demonstrated to occur in gray iron ductile iron and compacted graphite iron. Machinability was demonstrated to be improved by age strengthening when free ferrite was present in the microstructure, but not in a fully pearlitic microstructure. Age strengthening only occurs when there is residual nitrogen in solid solution in the Ferrite, whether the ferrite is free ferrite or the ferrite lamellae within pearlite. Age strengthening can be accelerated by Mn at about 0.5% in excess of the Mn/S balance Estimated energy savings over ten years is 13.05 trillion BTU, based primarily on yield improvement and size reduction of castings for equivalent service. Also it is estimated that the heavy truck end use of lighter castings for equivalent service requirement will result in a diesel fuel energy savings of 131 trillion BTU over ten years.

  1. Research and application of inertia-gravity dedusting and noise reduction technology in mine airshaft outlet%Research and application of inertia-gravity dedusting and noise reduction technology in mine airshaft outlet

    Institute of Scientific and Technical Information of China (English)

    Wang Haiqiao; Li Yiqun; Chen Shiqiang

    2011-01-01

    Massive dust of exhausted airflow easily diffuses to the industrial square while hoisting shaft is used as return shaft in the retrograde ventilation, and certainly there is a problem of dust scattering and noise exceeding standard. In order to solve the problem, the coupled technology of dedusting and noise reduction in airshaft outlet was investigated and the device with the function of Dedusting and noise Reduction (DR) was originated. The device is named as DR diffuser, which comprehensively utilizes mechanisms of inertia-gravity dedusting and absorption-insulation sound. The DR diffuser has been applied to Xingdong Coal Mine, and the testing results show that: a. the resistance of DR diffuser is lower than 60 Pa; b. the noise level reaches to 49.2 dB(A) ; c. the dedusting efficiency of above 50 μm is higher than 85 % ; d. dynamic pressure recovered from the outlet of main fan is larger than 50 Pa. The above measured data illustrates that comprehensive benefit of the DR diffuser is good, and the device is worth of applying to engineering site.

  2. Broadband noise and vibration reduction for lightweight chassis design using smart structure technologies

    Science.gov (United States)

    Messner, L.; Gusenbauer, M.; Rittenschober, T.

    2007-04-01

    Lightweight design is gaining more and more importance in the automotive industry. Engineers are trying hard to reduce the increased weight of chassis due to safety and comfort issues. This paper presents new achievements in the field of control design for smart structures, targeting at innovative lightweight, high-performance and low-noise engineering constructions with integrated embedded systems technology: The first part of the paper focuses on new developments in the field of low-cost, highly efficient smart structure power electronics for piezoelectric elements. These elements will be integrated into automotive chassis, which are able to measure any structure-borne disturbance such as vibrations. The second part of the paper presents frontier research in the design of a high-performance control concept for smart structure applications. This innovative control concept based on a nonlinear state observer design, targets at highly robust and broadband suppression of structure-borne noise in terms of fast changing frequencies. The controller performance is not only assessed with respect to stability and disturbance rejection but also with respect to technical feasibility and implementation issues (required sample rate, rounding errors due to inappropriate data formats, latency, etc.).

  3. Agricultural Industry Advanced Vehicle Technology: Benchmark Study for Reduction in Petroleum Use

    Energy Technology Data Exchange (ETDEWEB)

    Roger Hoy

    2014-09-01

    Diesel use on farms in the United States has remained relatively constant since 1985, decreasing slightly in 2009, which may be attributed to price increases and the economic recession. During this time, the United States’ harvested area also has remained relatively constant at roughly 300 million acres. In 2010, farm diesel use was 5.4% of the total United States diesel use. Crops accounting for an estimated 65% of United States farm diesel use include corn, soybean, wheat, hay, and alfalfa, respectively, based on harvested crop area and a recent analysis of estimated fuel use by crop. Diesel use in these cropping systems primarily is from tillage, harvest, and various other operations (e.g., planting and spraying) (Figure 3). Diesel efficiency is markedly variable due to machinery types, conditions of operation (e.g., soil type and moisture), and operator variability. Farm diesel use per acre has slightly decreased in the last two decades and diesel is now estimated to be less than 5% of farm costs per acre. This report will explore current trends in increasing diesel efficiency in the farm sector. The report combines a survey of industry representatives, a review of literature, and data analysis to identify nascent technologies for increasing diesel efficiency

  4. Commercial Application of the MIP-CGP Technology for Olefin Reduction in FCC Unit

    Institute of Scientific and Technical Information of China (English)

    Su Wensheng

    2009-01-01

    The refinery of Yanshan Petrochemical Company has twice retrofitted a 2.0-Mt/a RFCC unit with the MIP-CGP technology aimed at maximization ofisoparaffins/clean gasoline and increased output ofpropylene. By modi-fying the riser reactor with addition of the second reaction zone coupled with an added external catalyst cooler outside the regenerator and adoption of the CGP catalyst to control the cracking depth the refiners have realized the target of reducing olefin content in gasoline and increasing the yield of LPG. The results of retrofitting the RFCC unit have revealed that after revamp of FCC unit the yield of LPG was increased by 7.31%, the conversion rate was increased by 9.06%, and the total liquid yield was decreased by 0.3%. After revamp of the RFCC unit the olefin content in gasoline was reduced by 19.5 v%, and the RON rating of gasoline was increased by 0.7 units to meet the demand of Beijing municipality for manufacture of the Olympic clean gasoline.

  5. Use of modern and clean coal technologies for reduction of greenhouse gas emissions

    Energy Technology Data Exchange (ETDEWEB)

    Anca Popescu; George Lavrov; Diana Costea [Institute of Power Studies, Bucharest (Romania)

    2003-07-01

    The article reviews the status of CO{sub 2} taxes and other environmental taxes in the European Union. It concludes that the economic impacts of the CO{sub 2} tax are likely to be small but positive and if tax revenues were utilized for implementing measures to reduce energy use and introduce renewables and cogeneration, CO{sub 2} emission could be reduced much further. Reasons are given for a CO{sub 2}/energy tax in Central and Eastern Europe. The effect of a CO{sub 2} tax on the expansion plan of capacities for electricity generation in Romania is explored under different scenarios. It is concluded that in the period 2002 to 2020 combined cycle gas turbines and nuclear power are the preferred means of power generation but after 2010 coal would be favoured (because of the escalation of natural gas prices and the taxes). In these conditions more efficient technologies should be employed, using domestic lignite resources. A series of 12 PowerPoint slides are included. 9 refs., 2 figs., 2 tabs.

  6. A Novel Power Reduction Technique for Dual-Threshold Domino Logic in Sub-65nm Technology

    Directory of Open Access Journals (Sweden)

    Tarun Kr. Gupta

    2013-03-01

    Full Text Available A novel technique for dual- threshold is proposed and examined with inputs and clock signals combinationin 65nm dual- threshold footerless domino circuit for reduced leakage current. In this technique a p-typeand an n-type leakage controlled transistor (LCTsare introduced between the pull-up and pull-downnetwork and the gate of one is controlled by the source of the other. A high-threshold transistor is used inthe input for reducing gate oxide leakage current which becomes dominant in nanometer technology.Simulations based on 65nm BISM4 model for proposeddomino circuits shows that CLIL (clock low andinput low and CHIH (clock high and input high state is ineffective for lowering leakage current. TheCLIH (clock low input high state is only effective to suppress the leakage at low and high temperatures forwide fan-in domino circuits but for AND gate CHIL (clock high input low state is preferred to reducetheleakage current. The proposed circuit technique forAND2, OR2, OR4 and OR8 circuits reduces the activepower consumption by 39.6% to 57.9% and by 32.4% to40.3% at low and high die temperaturesrespectively when compared to the standard dual-threshold voltage domino logic circuits.

  7. A Novel Power Reduction Technique for Dual-Threshold Domino Logic in Sub-65nm Technology

    Directory of Open Access Journals (Sweden)

    Tarun Kr. Gupta

    2013-02-01

    Full Text Available A novel technique for dual- threshold is proposed and examined with inputs and clock signals combinationin 65nm dual- threshold footerless domino circuit for reduced leakage current. In this technique a p-typeand an n-type leakage controlled transistor (LCTsare introduced between the pull-up and pull-downnetwork and the gate of one is controlled by the source of the other. A high-threshold transistor is used inthe input for reducing gate oxide leakage current which becomes dominant in nanometer technology.Simulations based on 65nm BISM4 model for proposeddomino circuits shows that CLIL (clock low andinput low and CHIH (clock high and input high state is ineffective for lowering leakage current. TheCLIH (clock low input high state is only effective to suppress the leakage at low and high temperatures forwide fan-in domino circuits but for AND gate CHIL (clock high input low state is preferred to reducetheleakage current. The proposed circuit technique forAND2, OR2, OR4 and OR8 circuits reduces the activepower consumption by 39.6% to 57.9% and by 32.4% to40.3% at low and high die temperaturesrespectively when compared to the standard dual-threshold voltage domino logic circuits.

  8. [State of the art and future trends in technology for computed tomography dose reduction].

    Science.gov (United States)

    Calzado Cantera, A; Hernández-Girón, I; Salvadó Artells, M; Rodríguez González, R

    2013-12-01

    The introduction of helical and multislice acquisitions in CT scanners together with decreased image reconstruction times has had a tremendous impact on radiological practice. Technological developments in the last 10 to 12 years have enabled very high quality images to be obtained in a very short time. Improved image quality has led to an increase in the number of indications for CT. In parallel to this development, radiation exposure in patients has increased considerably. Concern about the potential health risks posed by CT imaging, reflected in diverse initiatives and actions by official organs and scientific societies, has prompted the search for ways to reduce radiation exposure in patients without compromising diagnostic efficacy. To this end, good practice guidelines have been established, special applications have been developed for scanners, and research has been undertaken to optimize the clinical use of CT. Noteworthy technical developments incorporated in scanners include the different modes of X-ray tube current modulation, automatic selection of voltage settings, selective organ protection, adaptive collimation, and iterative reconstruction. The appropriate use of these tools to reduce radiation doses requires thorough knowledge of how they work. Copyright © 2013 SERAM. Published by Elsevier Espana. All rights reserved.

  9. Western oil shale development: a technology assessment. Volume 1. Main report

    Energy Technology Data Exchange (ETDEWEB)

    1981-11-01

    The general goal of this study is to present the prospects of shale oil within the context of (1) environmental constraints, (2) available natural and economic resources, and (3) the characteristics of existing and emerging technology. The objectives are: to review shale oil technologies objectively as a means of supplying domestically produced fuels within environmental, social, economic, and legal/institutional constraints; using available data, analyses, and experienced judgment, to examine the major points of uncertainty regarding potential impacts of oil shale development; to resolve issues where data and analyses are compelling or where conclusions can be reached on judgmental grounds; to specify issues which cannot be resolved on the bases of the data, analyses, and experienced judgment currently available; and when appropriate and feasible, to suggest ways for the removal of existing uncertainties that stand in the way of resolving outstanding issues.

  10. Municipal Solid Waste (MSW) to Liquid Fuels Synthesis, Volume 1: Availability of Feedstock and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Valkenburt, Corinne; Walton, Christie W.; Thompson, Becky L.; Gerber, Mark A.; Jones, Susanne B.; Stevens, Don J.

    2008-12-01

    This report investigated the potential of using municipal solid waste (MSW) to make synthesis gas (syngas) suitable for production of liquid fuels. Issues examined include: • MSW physical and chemical properties affecting its suitability as a gasifier feedstock and for liquid fuels synthesis • expected process scale required for favorable economics • the availability of MSW in quantities sufficient to meet process scale requirements • the state-of-the-art of MSW gasification technology.

  11. Economic Feasibility and Market Readiness of Solar Technologies. Draft Final Report. Volume I.

    Energy Technology Data Exchange (ETDEWEB)

    Flaim, Silvio J.; Buchanan, Deborah L.; Christmas, Susan; Fellhauer, Cheryl; Glenn, Barbara; Ketels, Peter A.; Levary, Arnon; Mourning, Pete; Steggerda, Paul; Trivedi, Harit; Witholder, Robert E.

    1978-09-01

    Systems descriptions, costs, technical and market readiness assessments are reported for ten solar technologies: solar heating and cooling of buildings (SHACOB), passive, agricultural and industrial process heat (A/IPH), biomass, ocean thermal (OTEC), wind (WECS), solar thermal electric, photovoltaics, satellite power station (SPS), and solar total energy systems (STES). Study objectives, scope, and methods. are presented. of Joint Task The cost and market analyses portion 5213/6103 will be used to make commercialization assessments in the conclusions of. the final report.

  12. ICAM (Integrated Computer-Aided Manufacturing) Manufacturing Cost/Design Guide. Volume 7. Technology Transfer Summary.

    Science.gov (United States)

    1984-09-01

    advanced composite structures for production. Conduct material and manufacturing trade-off studies on ATF advanced design, NASA composite wing, and...255-7371. D-17 .* . . . . . . .. . .. .. . . . . . - . , o , . . - .’. TTD4502 60000 12 Sept 1984 CC tE % > LL 00 o0h K; Cr A .’ TTD450260000 12... coatings on the internal "Top-of-the-Line" Manu- observing the effect of the surfaces of hollowf~acturing Technology Success proposed change. Potential

  13. Engineering Technology Reports, Volume 1: Laboratory Directed Research and Development FY00

    Energy Technology Data Exchange (ETDEWEB)

    Baron, A L; Langland, R T; Minichino, C

    2001-10-03

    In FY-2000, Engineering at Lawrence Livermore National Laboratory faced significant pressures to meet critical project milestones, and immediate demands to facilitate the reassignment of employees as the National Ignition Facility (the 600-TW laser facility being designed and built at Livermore, and one of the largest R&D construction projects in the world) was in the process of re-baselining its plan while executing full-speed its technology development efforts. This drive for change occurred as an unprecedented level of management and program changes were occurring within LLNL. I am pleased to report that we met many key milestones and achieved numerous technological breakthroughs. This report summarizes our efforts to perform feasibility and reduce-to-practice studies, demonstrations, and/or techniques--as structured through our technology centers. Whether using computational engineering to predict how giant structures like suspension bridges will respond to massive earthquakes or devising a suitcase-sized microtool to detect chemical and biological agents used by terrorists, we have made solid technical progress. Five Centers focus and guide longer-term investments within Engineering, as well as impact all of LLNL. Each Center is responsible for the vitality and growth of the core technologies it represents. My goal is that each Center will be recognized on an international scale for solving compelling national problems requiring breakthrough innovation. The Centers and their leaders are as follows: Center for Complex Distributed Systems--David B. McCallen; Center for Computational Engineering--Kyran D. Mish; Center for Microtechnology--Raymond P. Mariella, Jr.; Center for Nondestructive Characterization--Harry E. Martz, Jr.; and Center for Precision Engineering--Keith Carlisle.

  14. Technology Scenario for the Year 2005. Volume II. Detailed Scenes for Scenarios.

    Science.gov (United States)

    1981-10-01

    from a very considerable distance, acoustic devices that analyse radiated sound signatures, and IR receivers that analyse heat radiation patterns...to counter with nasking tactics of one kind or another--such a.s radiation of false electromagnetic signatures, electronic jamming, etc. Only a...ries Science, Technology, and I novat ion. Treparedl 1,r tile :atioana[ Science Foundation. Columbus: Bat telleo, 1973. .ieittv, .1. Kell Iv, ’ Solair

  15. 2005 5th Annual CMMI Technology Conference and User Group. Volume 3 - Wednesday

    Science.gov (United States)

    2005-11-17

    formerly Sperry Flight Systems) and 2 years with Tracor Aerospace, developed or managed the development of embedded software for avionics systems...estimating, tracking, forecasting, and benchmarking. Mr. Ross, during 17 years with Honeywell Air Transport Systems (formerly Sperry Flight Systems...Implementing CMMI in a Services Environment Thomas E. Zience and Roger W. Lee BAE Systems Information Technology All Rights Reserved by BAE Systems Information

  16. WSTIAC: Weapon Systems Technology Information Analysis Center. Volume 6, Number 1

    Science.gov (United States)

    2005-01-01

    Computational Neuroscience Program 2004. Associate Editor; Journal of Counter Ordinance Technology. Joel L EDavis, Program Manager, Cognitive and Neural...tests were against unitary (nonseparating) targets representative of the Journal of the Optical Society of America A, involves of SCUD-type ballistic...Agent ( CSEA ) and prime contractor for the Aegis Weapon System agencies. A single query searches across 30 databases and and Vertical Launch System

  17. Energy Saving Melting and Revert Reduction Technology (Energy-SMARRT): Light Metals Permanent Mold Casting

    Energy Technology Data Exchange (ETDEWEB)

    Fasoyinu, Yemi [CanmetMATERIALS

    2014-03-31

    Current vehicles use mostly ferrous components for structural applications. It is possible to reduce the weight of the vehicle by substituting these parts with those made from light metals such as aluminum and magnesium. Many alloys and manufacturing processes can be used to produce these light metal components and casting is known to be most economical. One of the high integrity casting processes is permanent mold casting which is the focus of this research report. Many aluminum alloy castings used in automotive applications are produced by the sand casting process. Also, aluminum-silicon (Al-Si) alloys are the most widely used alloy systems for automotive applications. It is possible that by using high strength aluminum alloys based on an aluminum-copper (Al-Cu) system and permanent mold casting, the performance of these components can be enhanced significantly. This will also help to further reduce the weight. However, many technological obstacles need to be overcome before using these alloys in automotive applications in an economical way. There is very limited information in the open literature on gravity and low-pressure permanent mold casting of high strength aluminum alloys. This report summarizes the results and issues encountered during the casting trials of high strength aluminum alloy 206.0 (Al-Cu alloy) and moderate strength alloy 535.0 (Al-Mg alloy). Five engineering components were cast by gravity tilt-pour or low pressure permanent mold casting processes at CanmetMATERIALS (CMAT) and two production foundries. The results of the casting trials show that high integrity engineering components can be produced successfully from both alloys if specific processing parameters are used. It was shown that a combination of melt processing and mold temperature is necessary for the elimination of hot tears in both alloys.

  18. Dynamic Control System Performance during Commissioning of the Space Technology 7-Disturbance Reduction System Experiment of LISA Pathfinder

    Science.gov (United States)

    Hsu, Oscar; Maghami, Peiman; O’Donnell, James R., Jr.; Ziemer, John; Romero-Wolf, Andrew

    2017-01-01

    The Space Technology-7 Disturbance Reduction System (DRS) launched aboard the European Space Agency's LISA Pathfinder spacecraft on December 3, 2015, after more than a decade in development. DRS consists of three primary components: an Integrated Avionics Unit (IAU), Colloidal MicroNewton Thrusters, and Dynamic Control System (DCS) algorithms implemented on the IAU. During the portions of the mission in which the DRS was under control, the DCS was responsible for controlling the spacecraft and the free-floating test masses that were part of the LISA Test Package. The commissioning period was originally divided into two periods: before propulsion separation and after propulsion separation. A recommissioning period was added after an anomaly occurred in the thruster system. The paper will describe the activities used to commission DRS, present results from the commissioning of the DCS and the recommissioning activities per-formed after the thruster anomaly.

  19. The international research progress of Ammonia(NH3) emissions and emissions reduction technology in farmland ecosystem

    Science.gov (United States)

    Yang, W. Z.; Jiao, Y.

    2017-03-01

    NH3 is the important factor leading to the grey haze, and one of the main causes of environmental problems of serious ecological imbalance, such as acid rain and air quality deterioration. The fertilizer excessive application of the current farmland results NH3 emissions intensity greatly. In order to clear the farmland NH3 emissions research status and achievements, the literature of farmland NH3 emission related were retrievaled by the SCI journals and Chinese science citation database. Some factors of NH3 emission were analyzed such as soil factors, climate factors and farmland management measures. The research progress was inductived on farmland NH3 emission reduction technology. The results will help to clarify farmland NH3 emissions research progress. The theoretical guidance was provided on the future of farmland NH3 emissions research.

  20. Methane Post-Processor Development to Increase Oxygen Recovery beyond State-of-the-Art Carbon Dioxide Reduction Technology

    Science.gov (United States)

    Abney, Morgan B.; Greenwood, Zachary; Miller, Lee A.; Alvarez, Giraldo; Iannantuono, Michelle; Jones, Kenny

    2013-01-01

    State-of-the-art life support carbon dioxide (CO2) reduction technology, based on the Sabatier reaction, is theoretically capable of 50% recovery of oxygen from metabolic CO2. This recovery is constrained by the limited availability of reactant hydrogen. Post-processing of the methane byproduct from the Sabatier reactor results in hydrogen recycle and a subsequent increase in oxygen recovery. For this purpose, a Methane Post-Processor Assembly containing three sub-systems has been developed and tested. The assembly includes a Methane Purification Assembly (MePA) to remove residual CO2 and water vapor from the Sabatier product stream, a Plasma Pyrolysis Assembly (PPA) to partially pyrolyze methane into hydrogen and acetylene, and an Acetylene Separation Assembly (ASepA) to purify the hydrogen product for recycle. The results of partially integrated testing of the sub-systems are reported

  1. Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology Presented at the Annual Convention of the Association for Educational Communications and Technology (32nd, Louisville, KY, 2009). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2009-01-01

    For the thirty-second year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. This volume includes papers presented at the national convention of the Association for Educational Communications and Technology held in Louisville, KY. This…

  2. Development of the destruction technology for radioactive organic solid wastes

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Park, H.S.; Lee, K.W. [and others

    1999-04-01

    The followings were studied through the project entitled 'Technology development for nuclear fuel cycle waste treatment'. 1. Organic waste decomposition technology development A. Destruction technology for organic wastes using Ag(2)-mediated electrochemical oxidation B. Recovery and regeneration technology for the spent chemicals used in the MEO process 2. Radioactive metal waste recycling technology A. Surface decontamination processes B. Decontamination waste treatment technology 3. Volume reduction technology nuclear fuel cycle (NFC) technology A. Estimation of the amount of radwastes and the optimum volume reduction methodology of domestic NFC B. Pretreatment of spent fuel cladding by electrochemical decontamination C. Hot cell process technology for the treatment of NFC wastes 4. Design and fabrication of the test equipment of volume reduction and reuse of alpha contaminated wastes 5. Evaluation on environmental compatibility of NFC A. Development of evaluation methodology on environmental friendliness of NFC B. Residual activity assessment of recycling wastes. (author). 321 refs., 54 tabs., 183 figs.

  3. Reduction of Static Power with Minimized Ground Bounce Noise Using Sleep Signal Slew Rate Modulation In 45nm Technology

    Directory of Open Access Journals (Sweden)

    M. Naga Pramod Reddy

    2014-06-01

    Full Text Available In MTCMOS Integrated Circuit design there exists a significant trade-off between static power consumption and technology scaling. In Modern circuits increase in power dissipation is significant due to combination of higher clock speeds, greater functional integration and smaller process geometries resulting in dominant static power consumption component. This is a big challenge for the circuit designer. However, the designers do have few methods like sleep transistor approach, sleepy stack approach to reduce this static power consumption. However all of these methods do have their own drawbacks. In order to achieve lower static power consumptions one has to sacrifice area and circuit performance metrics. In this paper we propose a new enhancement to available static power reduction techniques by modulating the sleep signal slew rate. We have designed the basic CMOS circuits in MTCMOS to achieve significant reduction in Static power consumption. For Sleep signal slew rate modulation we have proposed a modulator called triple phase sleep signal slew rate modulator. By using this Triple Phase Sleep signal modulator(TPS we can control the noise at ground distribution network (ground bounce noise produced during sleep to active state transition. By using TPS we can decrease the reactivation time to a recognizable extent, along with reduced power (static and dynamic dissipation.

  4. Energy Saving Melting and Revert Reduction Technology: Innovative Semi-Solid Metal (SSM) Processing

    Energy Technology Data Exchange (ETDEWEB)

    Diran Apelian

    2012-08-15

    Semi-solid metal (SSM) processing has emerged as an attractive method for near-net-shape manufacturing due to the distinct advantages it holds over conventional near-net-shape forming technologies. These advantages include lower cycle time, increased die life, reduced porosity, reduced solidification shrinkage, improved mechanical properties, etc. SSM processing techniques can not only produce the complex dimensional details (e.g. thin-walled sections) associated with conventional high-pressure die castings, but also can produce high integrity castings currently attainable only with squeeze and low-pressure permanent mold casting processes. There are two primary semi-solid processing routes, (a) thixocasting and (b) rheocasting. In the thixocasting route, one starts from a non-dendritic solid precursor material that is specially prepared by a primary aluminum manufacturer, using continuous casting methods. Upon reheating this material into the mushy (a.k.a. "two-phase") zone, a thixotropic slurry is formed, which becomes the feed for the casting operation. In the rheocasting route (a.k.a. "slurry-on-demand" or "SoD"), one starts from the liquid state, and the thixotropic slurry is formed directly from the melt via careful thermal management of the system; the slurry is subsequently fed into the die cavity. Of these two routes, rheocasting is favored in that there is no premium added to the billet cost, and the scrap recycling issues are alleviated. The CRP (Trade Marked) is a process where the molten metal flows through a reactor prior to casting. The role of the reactor is to ensure that copious nucleation takes place and that the nuclei are well distributed throughout the system prior to entering the casting cavity. The CRP (Trade Marked) has been successfully applied in hyper-eutectic Al-Si alloys (i.e., 390 alloy) where two liquids of equal or different compositions and temperatures are mixed in the reactor and creating a SSM slurry. The process has been mostly

  5. Lung volume reduction in pulmonary emphysema from the radiologist's perspective; Lungenvolumenreduktion beim Lungenemphysem aus der Sicht des Radiologen

    Energy Technology Data Exchange (ETDEWEB)

    Doellinger, F.; Poellinger, A. [Charite Universitaetsmedizin Berlin (Germany). Dept. of Radiology; Huebner, R.H. [Charite Universitaetsmedizin Berlin (Germany). Dept. of Internal Medicine/Infectious and Respiratory Diseases; Kuhnigk, J.M. [Fraunhofer MEVIS, Bremen (Germany). Inst. for Medical Image Computing

    2015-08-15

    Pulmonary emphysema causes decrease in lung function due to irreversible dilatation of intrapulmonary air spaces, which is linked to high morbidity and mortality. Lung volume reduction (LVR) is an invasive therapeutical option for pulmonary emphysema in order to improve ventilation mechanics. LVR can be carried out by lung resection surgery or different minimally invasive endoscopical procedures. All LVR-options require mandatory preinterventional evaluation to detect hyperinflated dysfunctional lung areas as target structures for treatment. Quantitative computed tomography can determine the volume percentage of emphysematous lung and its topographical distribution based on the lung's radiodensity. Modern techniques allow for lobebased quantification that facilitates treatment planning. Clinical tests still play the most important role in post-interventional therapy monitoring, but CT is crucial in the detection of postoperative complications and foreshadows the method's high potential in sophisticated experimental studies. Within the last ten years, LVR with endobronchial valves has become an extensively researched minimally-invasive treatment option. However, this therapy is considerably complicated by the frequent occurrence of functional interlobar shunts. The presence of ''collateral ventilation'' has to be ruled out prior to valve implantations, as the presence of these extraanatomical connections between different lobes may jeopardize the success of therapy. Recent experimental studies evaluated the automatic detection of incomplete lobar fissures from CT scans, because they are considered to be a predictor for the existence of shunts. To date, these methods are yet to show acceptable results.

  6. Turbo system technology for downsized high volume engines with PZEV capability

    Energy Technology Data Exchange (ETDEWEB)

    Bjoernsson, Haakan; Johansson, Lena [Volvo Car Corp., Gothenburg (Sweden)

    2008-07-01

    Turbo charging is not anymore only used for exotic high performance vehicles. Instead boosting technology will be used to provide high specific power output, reduced fuel consumption and consequently lower CO2 emissions for all types of vehicles in the future. The main reason for this change is the obvious need for a shift towards more fuel efficient down-sized engines which output that enables a lower fuel consumption. This new way of using turbo charging introduces a new set of demands which needs to be fulfilled before this technology can be applied efficiently in to mass production. Since one of the most basic down-sizing features is a high specific low end torque with an associated excellent transient behavior at low speeds, the overall charging efficiency, must be high over a broad speed and load range. The down-sizing effect also imply a more frequent use of the high specific power, which means that smaller engines needs to cope with a high exhaust gas temperature more often. High specific power output also has to be combined with strict US and EC emission legislation i.e. fulfillment of PZEV and Euro 6 emissions. This will add new challenges to turbo system development. Simultaneously, material prices have increased significantly over the last five years. Unfortunately, these new requirements have a tendency to push the piece price in the wrong direction, which means that down-sizing have a tendency to add high on-cost to the most price sensitive products. Therefore, the aim of this paper is to discuss possible solutions for future turbo system technology. (orig.)

  7. Early treatment volume reduction rate as a prognostic factor in patients treated with chemoradiotherapy for limited stage small cell lung cancer

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Joo Hwan; Lee, Jeong Shin; Lee, Chang Geol; Cho, Jae Ho [Dept. of Radiation Oncology, Yonsei Cancer Center, Yonsei University College of Medicine, Seoul (Korea, Republic of); Choi, Jin Hyun; Kim, Jun Won [Dept. of Radiation Oncology, Gangnam Severance Hospital, Yonsei University College of Medicine, Seoul (Korea, Republic of)

    2015-06-15

    To investigate the relationship between early treatment response to definitive chemoradiotherapy (CRT) and survival outcome in patients with limited stage small cell lung cancer (LS-SCLC). We retrospectively reviewed 47 patients with LS-SCLC who received definitive CRT between January 2009 and December 2012. Patients were treated with systemic chemotherapy regimen of etoposide/carboplatin (n = 15) or etoposide/cisplatin (n = 32) and concurrent thoracic radiotherapy at a median dose of 54 Gy (range, 46 to 64 Gy). Early treatment volume reduction rate (ETVRR) was defined as the percentage change in gross tumor volume between diagnostic computed tomography (CT) and simulation CT for adaptive RT planning and was used as a parameter for early treatment response. The median dose at adaptive RT planning was 36 Gy (range, 30 to 43 Gy), and adaptive CT was performed in 30 patients (63.8%). With a median follow-up of 27.7 months (range, 5.9 to 75.8 months), the 2-year locoregional progression-free survival (LRPFS) and overall survival (OS) rates were 74.2% and 56.5%, respectively. The mean diagnostic and adaptive gross tumor volumes were 117.9 mL (range, 5.9 to 447 mL) and 36.8 mL (range, 0.3 to 230.6 mL), respectively. The median ETVRR was 71.4% (range, 30 to 97.6%) and the ETVRR >45% group showed significantly better OS (p < 0.0001) and LRPFS (p = 0.009) than the other group. ETVRR as a parameter for early treatment response may be a useful prognostic factor to predict treatment outcome in LS-SCLC patients treated with CRT.

  8. Bibliography on Cold Regions Science and Technology Volume 53, Part 2

    Science.gov (United States)

    1999-12-01

    the velocity distribution in ping-pong- Martian north polar cap 1996-1997 [1999, eng] 53-3536 Ishii , S. ball avalanches [1998, eng] 53-2020 Iwasaki...warming [1988, Siberian Platform [1997, eng] 53-1740 Scharroo, R. eng] 53-1118 Sawa ,Y. Antarctic elevation change from 1992 to 1996 [1998, Schlich,R. Size...freezing technology for environmental remediation. road surface. Ishii , S., et al, [1998,eng] 53-2958 Atlantic Oceans-Reykjanes Ridge Dash, J.G., [1999,eng

  9. Light sources for high-volume manufacturing EUV lithography: technology, performance, and power scaling

    Science.gov (United States)

    Fomenkov, Igor; Brandt, David; Ershov, Alex; Schafgans, Alexander; Tao, Yezheng; Vaschenko, Georgiy; Rokitski, Slava; Kats, Michael; Vargas, Michael; Purvis, Michael; Rafac, Rob; La Fontaine, Bruno; De Dea, Silvia; LaForge, Andrew; Stewart, Jayson; Chang, Steven; Graham, Matthew; Riggs, Daniel; Taylor, Ted; Abraham, Mathew; Brown, Daniel

    2017-06-01

    Extreme ultraviolet (EUV) lithography is expected to succeed in 193-nm immersion multi-patterning technology for sub-10-nm critical layer patterning. In order to be successful, EUV lithography has to demonstrate that it can satisfy the industry requirements in the following critical areas: power, dose stability, etendue, spectral content, and lifetime. Currently, development of second-generation laser-produced plasma (LPP) light sources for the ASML's NXE:3300B EUV scanner is complete, and first units are installed and operational at chipmaker customers. We describe different aspects and performance characteristics of the sources, dose stability results, power scaling, and availability data for EUV sources and also report new development results.

  10. Army Science and Technology Master Plan, Fiscal Year 1997 - Volume 2.

    Science.gov (United States)

    1996-12-01

    be demonstrated in FY97 and 98, respectively, to exploit both commercial CDMA and BCDMA technology for MSE access. In order to extend ATM services to...Florence John Appel MAJ Paul Begeman TARDEC SARD-TT Armor Center, DFD (810)574-5473 697-8432 (502)624-8994 DSN : 786-5473 227-8432 464-8994 III.G.06. Hit...AATD SARDA-TF Avn Center (DCD) ATZQ-CD 804-878-4130 703-697-8434 334-255-3370/3489 DSN 927-4130 DSN 227-8434 DSN 558 A-4-2 D. AIR AND SPACE VEHICLES

  11. Conceptual design and systems analysis of photovoltaic power systems. Volume III(1). Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pittman, P.F.

    1977-05-01

    Conceptual designs were made and analyses were performed on three types of solar photovoltaic power systems. Included were Residential (1 to 10 kW), Intermediate (0.1 to 10 MW), and Central (50 to 1000 MW) Power Systems to be installed in the 1985 to 2000 time period. Subsystem technology presented here includes: insolation, concentration, silicon solar cell modules, CdS solar cell module, array structure, battery energy storage, power conditioning, residential power system architectural designs, intermediate power system structural design, and central power system facilities and site survey.

  12. Planetary/DOD entry technology flight experiments. Volume 2: Planetary entry flight experiments

    Science.gov (United States)

    Christensen, H. E.; Krieger, R. J.; Mcneilly, W. R.; Vetter, H. C.

    1976-01-01

    The technical feasibility of launching a high speed, earth entry vehicle from the space shuttle to advance technology for the exploration of the outer planets' atmospheres was established. Disciplines of thermodynamics, orbital mechanics, aerodynamics propulsion, structures, design, electronics and system integration focused on the goal of producing outer planet environments on a probe shaped vehicle during an earth entry. Major aspects of analysis and vehicle design studied include: planetary environments, earth entry environment capability, mission maneuvers, capabilities of shuttle upper stages, a comparison of earth entry planetary environments, experiment design and vehicle design.

  13. Nutrient and Sediment Reductions from Algal Flow-Way Technologies: Recommendations to the Chesapeake Bay Program's Water Quality Goal Implementation Team from the Algal Flow-Way Technologies BMP Expert Panel

    Science.gov (United States)

    The Chesapeake Stormwater Network hosted a workshop on July, 2012 to discuss the potential nutrient reductions from emerging stormwater technologies including algal flow-way technologies (AFTs). Workshop participants recommended the Chesapeake Bay Program’s Water Quality Goal Implementation Team(WQ...

  14. Development of BEACON technology. Volume I. Final report, April 1980-April 1983

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-08-01

    The BEACON process is based on the catalytic deposition of a highly reactive carbon from low heating value gases, primarily by the carbon monoxide disproportionation reaction. This carbon is subsequently reacted with steam to produce predominantly methane or hydrogen, depending on the catalyst formulation and operating conditions. Commercial application envisions an air-blown coal gasification combined-cycle power plant with a coproduct of either methane or hydrogen. Significant cost reductions are anticipated relative to corresponding oxygen-blown coal gasification systems. Excellent fluid bed catalysts have been developed which have retained initial activity for over 400 hours of steady state operation. This stability was demonstrated in a tandem reactor system which provides for semi-continuous catalyst circulation between the carbon deposition and steam gasification fluid bed reactors.

  15. Whole blood pathogen reduction technology and blood safety in sub-Saharan Africa: A systematic review with regional discussion

    Directory of Open Access Journals (Sweden)

    Asa'ah Nkohkwo

    2016-02-01

    Full Text Available Background: Despite vast improvements in transfusion services in sub-Saharan Africa over the last decade, there remain serious concerns on the safety and adequacy of the blood supply across the region.Objective: This review paper ascertains the role of pathogen reduction technology (PRT in improving blood safety and supply adequacy in the region.Method: The state of blood safety in sub-Saharan Africa was reviewed. Meetings, seminars and correspondence were undertaken with key clinicians, scientists and professional bodies in the region, including the World Health Organization’s Regional Office for Africa, to examine the suitability of PRT for improving the safety of whole blood transfusion, a prevalent transfusion format in the region.Results: Existing literature suggests that combining PRT with current blood safety measures (such as serology would improve the safety and adequacy of the blood supply for transfusions in sub-Saharan Africa. This was echoed by the findings of the stakeholder meetings.Conclusion: Following a detailed appraisal of two leading PRT systems, the Mirasol® PRT System and the Cerus S-303 System, we suggest that companies conduct comprehensive toxicological evaluation of the agents used for PRT and publish this in the scientific literature. We also recommend that the safety and efficacy of these technologies should be established in a randomised clinical trial conducted in sub-Saharan Africa.

  16. Industrial applications study. Volume III. Technology data base evaluation of waste recovery systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Harry L.; Hamel, Bernard B.; Karamchetty, Som; Steigelmann, William H.; Gajanana, Birur C.; Agarwal, Anil P.; Klock, Lawrence W.; Henderson, James M.; Calobrisi, Gary; Hedman, Bruce A.; Koluch, Michael; Biancardi, Frank; Bass, Robert; Landerman, Abraham; Peters, George; Limaye, Dilip; Price, Jeffrey; Farr, Janet

    1977-01-01

    An analytical study was undertaken to estimate the present and potential technical and economic characteristics of a wide range of components and complete systems capable of converting industrial and commercial waste heat into mechanical or electrical power and/or building and process heating and cooling. The component and system technologies evaluated include: Rankine-, Stirling-, and Brayton-cycle power systems; reciprocating-, rotary-, and turbo-expanders; heat exchangers and heat pumps; thermally driven cooling and dehumidification systems; and integrated systems capable of providing multiple outputs. Extensive analyses were conducted of Rankine-cycle systems using steam, halogenated hydrocarbons, and other organic compounds as working fluids. Performance characteristics, recoverable output power, and installed costs were estimated and are presented herein for Rankine-cycle systems utilizing selected working fluids over a range of waste heat source temperatures between approximately 200 and 1000/sup 0/F. Data describing the performance capabilities, technology and installed costs of heat exchangers, expanders and thermally driven absorption, vapor compression, steam-jet cooling and refrigeration systems are presented herein together with limited performance and cost estimates for Stirling-cycle power recovery systems. The component and system data were used to provide a preliminary assessment of the recoverable energy and associated system costs when integrated with generalized waste heat sources identified by Drexel University from their two-digit SIC industrial energy survey.

  17. Renewable Electricity Futures Study. Volume 2: Renewable Electricity Generation and Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Augustine, C.; Bain, R.; Chapman, J.; Denholm, P.; Drury, E.; Hall, D.G.; Lantz, E.; Margolis, R.; Thresher, R.; Sandor, D.; Bishop, N.A.; Brown, S.R.; Cada, G.F.; Felker, F.

    2012-06-01

    The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%-90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT).

  18. Renewable Electricity Futures Study. Volume 2. Renewable Electricity Generation and Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Augustine, Chad [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bain, Richard [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chapman, Jamie [Texas Tech Univ., Lubbock, TX (United States); Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Drury, Easan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hall, Douglas G. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lantz, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thresher, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sandor, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bishop, Norman A. [Knight Piesold, Denver, CO (United States); Brown, Stephen R. [HDR/DTA, Portland, ME (Untied States); Cada, Glenn F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Felker, Fort [National Renewable Energy Lab. (NREL), Golden, CO (United States); Fernandez, Steven J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Goodrich, Alan C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hagerman, George [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Heath, Garvin [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Neil, Sean [Ocean Renewable Energy Coalition, Portland, OR (United States); Paquette, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Young, Katherine [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2012-06-15

    The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%–90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT). Learn more at the RE Futures website. http://www.nrel.gov/analysis/re_futures/

  19. Nanoprobe NAPPA Arrays for the Nanoconductimetric Analysis of Ultra-Low-Volume Protein Samples Using Piezoelectric Liquid Dispensing Technology

    Directory of Open Access Journals (Sweden)

    Eugenia Pechkova

    2015-03-01

    Full Text Available In the last years, the evolution and the advances of the nanobiotechnologies applied to the systematic study of proteins, namely proteomics, both structural and functional, and specifically the development of more sophisticated and largescale protein arrays, have enabled scientists to investigate protein interactions and functions with an unforeseeable precision and wealth of details. Here, we present a further advancement of our previously introduced and described Nucleic Acid Programmable Protein Arrays (NAPPA-based nanoconductometric sensor. We coupled Quartz Crystal Microbalance with Dissipation factor Monitoring (QCM_D with piezoelectric inkjet printing technology (namely, the newly developed ActivePipette, which enables to significantly reduce the volume of probe required for genes/proteins arrays. We performed a negative control (with master mix, or MM and a positive control (MM_p53 plus MDM2. We performed this experiment both in static and in flow, computing the apparent dissociation constant of p53-MDM2 complex (130 nM, in excellent agreement with the published literature. We compared the results obtained with the ActivePipette printing and dispensing technology vs. pin spotting. Without the ActivePipette, after MDM2 addition the shift in frequency (Δf was 7575 Hz and the corresponding adsorbed mass was 32.9 μg. With the ActivePipette technology, after MDM2 addition Δf was 7740 Hz and the corresponding adsorbed mass was 33.6 μg. With this experiment, we confirmed the sensing potential of our device, being able to discriminate each gene and protein as well as their interactions, showing for each one of them a unique conductance curve. Moreover, we obtained a better yield with the ActivePipette technology.

  20. Fuel and Greenhouse Gas Emission Reduction Potentials by Appropriate Fuel Switching and Technology Improvement in the Canadian Electricity Generation Sector

    Directory of Open Access Journals (Sweden)

    Farshid Zabihian

    2010-01-01

    Full Text Available Problem statement: In recent years, Greenhouse Gas (GHG emissions and their potential effects on global climate change have been a worldwide concern. According to International Energy Agency (IEA, power generation contributes more than half of the global GHG emissions. Approach: Purpose of this study is to examine GHG emission reduction potentials in the Canadian electricity generation sector through fuel switching and adoption of advanced power generation systems. To achieve this objective, eight different scenarios were introduced. In the first scenario, existing power stations’ fuel was switched to natural gas. Existing power plants were replaced by Natural Gas Combined Cycle (NGCC, Integrated Gasification Combined Cycle (IGCC, Solid Oxide Fuel Cell (SOFC, hybrid SOFC and SOFC-IGCC hybrid power stations in scenario numbers 2 to 6, respectively. In last two scenarios, CO2 capture systems were installed in the existing power plants and in the second scenario, respectively. Results: The results showed that Canada’s GHG emissions can be reduced by 33, 59, 20, 64, 69, 29, 86 and 94% based on the first to eighth scenarios, respectively. On the other hand, the second scenario is the most practical and its technology has already matured and is available. In this scenario by replacing existing power plants by NGCC power plants, Canada can fulfill more than 25% of its 238,000 kt year-1 commitment of GHG emission reduction to the Kyoto Protocol. In addition, the GHG emission reduction potentials for each province and Canada as a whole were presented and compared. Based on the results, Alberta, Ontario and Saskatchewan are the biggest producers of GHG in Canada by emitting 49, 21 and 14% of Canada’s GHG emissions, respectively. Therefore, they have higher potential to reduce GHG emissions. The comparison of the results for different provinces revealed that based on efficiency of electricity generation and consumed fuel distribution; specific scenario