WorldWideScience

Sample records for volume moems testing

  1. Packaging of MEMS/MOEMS and nanodevices: reliability, testing, and characterization aspects

    Science.gov (United States)

    Tekin, Tolga; Ngo, Ha-Duong; Wittler, Olaf; Bouhlal, Bouchaib; Lang, Klaus-Dieter

    2011-02-01

    The last decade witnessed an explosive growth in research and development efforts devoted to MEMS devices and packaging. The successfully developed MEMS devices are, for example inkjet, pressure sensors, silicon microphones, accelerometers, gyroscopes, MOEMS, micro fuel cells and emerging MEMS. For the next decade, MEMS/MOEMS and nanodevice based products will penetrate into IT, telecommunications, automotive, defense, life sciences, medical and implantable applications. Forecasts say the MEMS market to be $14 billion by 2012. The packaging cost of MEMS/MOEMS products in general is about 70 percent. Unlike today's electronics IC packaging, their packaging are custom-built and difficult due to the moving structural elements. In order for the moving elements of a MEMS device to move effectively in a well-controlled atmosphere, hermetic sealing of the MEMS device in a cap is necessary. For some MEMS devices, such as resonators and gyroscopes, vacuum packaging is required. Usually, the cap is processed at the wafer level, and thus MEMS packaging is truly a wafer level packaging. In terms of MEMS/MOEMS and nanodevice packaging, there are still many critical issues need to be addressed due to the increasing integration density supported by 3D heterogeneous integration of multi-physic components/layers consisting of photonics, electronics, rf, plasmonics, and wireless. The infrastructure of MEMS/MOEMS and nanodevices and their packaging is not well established yet. Generic packaging platform technologies are not available. Some of critical issues have been studied intensively in the last years. In this paper we will discuss about processes, reliability, testing and characterization of MEMS/MOEMS and nanodevice packaging.

  2. Design and process test of a novel MOEMS accelerometer based on Raman-Nath diffraction

    Institute of Scientific and Technical Information of China (English)

    Zhang Zuwei; Wen Zhiyu; Shang Zhengguo; Li Dongling; Hu Jing

    2012-01-01

    A novel micro-opto-electro-mechanical system (MOEMS) accelerometer based on Raman-Nath diffraction is presented.It mainly consists of an FPW delay line oscillator and optical strip waveguides.The fundamental theories and principles of the device are introduced briefly.A flexural plate-wave delay-line oscillator is designed to work as an acousto-optic (AO) shifter,which has a Klein-Cook parameter of 0.38.Single-mode optical strip waveguides of 2 μm in width and thicknesses of 0.6 μm are designed by using the effective index method for light transmission.The E0y0 mode waveguide polarizers are designed to ensure the consistency of the light polarization in the waveguides.The fabrication process,based on (100) oriented,450-μm-thick silicon wafers is proposed in detail,and some difficulties in the process are discussed carefully.At last,a series of process tests are undertaken to solve the proposed problems.The results indicate that the proposed design and fabrication process of the device is dependable and realizable.

  3. MOEMS industrial infrastructure

    Science.gov (United States)

    van Heeren, Henne; Paschalidou, Lia

    2004-08-01

    Forecasters and analysts predict the market size for microsystems and microtechnologies to be in the order of 68 billion by the year 2005 (NEXUS Market Study 2002). In essence, the market potential is likely to double in size from its 38 billion status in 2002. According to InStat/MDR the market for MOEMS (Micro Optical Electro Mechanical Systems) in optical communication will be over $1.8 billion in 2006 and WTC states that the market for non telecom MOEMS will be even larger. Underpinning this staggering growth will be an infrastructure of design houses, foundries, package/assembly providers and equipment suppliers to cater for the demand in design, prototyping, and (mass-) production. This infrastructure is needed to provide an efficient route to commercialisation. Foundries, which provide the infrastructure to prototype, fabricate and mass-produce the designs emanating from the design houses and other companies. The reason for the customers to rely on foundries can be diverse: ranging from pure economical reasons (investments, cost-price) to technical (availability of required technology). The desire to have a second source of supply can also be a reason for outsourcing. Foundries aim to achieve economies of scale by combining several customer orders into volume production. Volumes are necessary, not only to achieve the required competitive cost prices, but also to attain the necessary technical competence level. Some products that serve very large markets can reach such high production volumes that they are able to sustain dedicated factories. In such cases, captive supply is possible, although outsourcing is still an option, as can be seen in the magnetic head markets, where captive and non-captive suppliers operate alongside each other. The most striking examples are: inkjet heads (>435 million heads per year) and magnetic heads (>1.5 billion heads per year). Also pressure sensor and accelerometer producers can afford their own facilities to produce the

  4. Robustness and reliability of MOEMS for miniature spectrometers

    Science.gov (United States)

    Rissanen, A.; Broas, M.; Hokka, J.; Mattila, T.; Antila, J.; Laamanen, M.; Saari, H.

    2013-03-01

    Tunable MOEMS Fabry-Perot interferometers (FPIs) are key elements in the miniaturization of spectroscopic instrumentation. Robustness and high reliability of the MOEMS structure are important factors especially for sensors utilized in challenging environments such as in space- and automotive applications. This paper presents reliability assessment of two types of MOEMS optical filters; a tunable ALD (atomic layer deposition) -based surface micromachined FPI for visible - near-infrared range, and a tunable FPI for mid- infrared applications based on LPCVD (low-pressure chemical vapor deposition) thin-film micromachining. High-G shock tests were performed on both MOEMS FPIs. The FPI structures can survive mechanical impact up to 18 000 G without any detectable changes in the capacitance, while detected failure mechanisms in this range arise from packaging and not from the MOEMS structures. The effect of DDMS SAM (dichlorodimethylsilane self-assembled monolayer) coating to prevent in-use stiction was evaluated in both humidity- and impact tests. In humidity tests, 20% stiction rate in non-coated devices vs. 0% stiction rate in DDMS-coated LPCVD FPIs under pull-in was observed. These results indicate good shock-impact robustness for both types of surface-micromachined structures, while DDMS SAM can be utilized to improve in-use reliability of MOEMS.

  5. MEMS/MOEMS foundry services at INO

    Science.gov (United States)

    García-Blanco, Sonia; Ilias, Samir; Williamson, Fraser; Généreux, Francis; Le Noc, Loïc; Poirier, Michel; Proulx, Christian; Tremblay, Bruno; Provençal, Francis; Desroches, Yan; Caron, Jean-Sol; Larouche, Carl; Beaupré, Patrick; Fortin, Benoit; Topart, Patrice; Picard, Francis; Alain, Christine; Pope, Timothy; Jerominek, Hubert

    2010-06-01

    In the MEMS manufacturing world, the "fabless" model is getting increasing importance in recent years as a way for MEMS manufactures and startups to minimize equipment costs and initial capital investment. In order for this model to be successful, the fabless company needs to work closely with a MEMS foundry service provider. Due to the lack of standardization in MEMS processes, as opposed to CMOS microfabrication, the experience in MEMS development processes and the flexibility of the MEMS foundry are of vital importance. A multidisciplinary team together with a complete microfabrication toolset allows INO to offer unique MEMS foundry services to fabless companies looking for low to mid-volume production. Companies that benefit from their own microfabrication facilities can also be interested in INO's assistance in conducting their research and development work during periods where production runs keep their whole staff busy. Services include design, prototyping, fabrication, packaging, and testing of various MEMS and MOEMS devices on wafers fully compatible with CMOS integration. Wafer diameters ranging typically from 1 inch to 6 inches can be accepted while 8-inch wafers can be processed in some instances. Standard microfabrication techniques such as metal, dielectric, and semiconductor film deposition and etching as well as photolithographic pattern transfer are available. A stepper permits reduction of the critical dimension to around 0.4 μm. Metals deposited by vacuum deposition methods include Au, Ag, Al, Al alloys, Ti, Cr, Cu, Mo, MoCr, Ni, Pt, and V with thickness varying from 5 nm to 2 μm. Electroplating of several materials including Ni, Au and In is also available. In addition, INO has developed and built a gold black deposition facility to answer customer's needs for broadband microbolometric detectors. The gold black deposited presents specular reflectance of less than 10% in the wavelength range from 0.2 μm to 100 μm with thickness ranging from

  6. MOEMS-based cardiac enzymes detector for acute myocardial infarction

    Science.gov (United States)

    Amritsar, Jeetender; Stiharu, Ion G.; Packirisamy, Muthukumaran; Balagopal, Ganesharam; Li, Xing

    2004-10-01

    Biomedical applications of MOEMS are limited only by the mankind imagination. Precision measurements on minute amounts of biological material could be performed by optical means with a remarkable accuracy. Although available in medical laboratories for general purposes, such analyzers are making their way directly to the users in the form of dedicated equipment. Such an example is a test kit to detect the existence of cardiac enzymes in the blood stream. Apart from the direct users, the medical personnel will make use of such tools given the practicality of the kit. In a large proportion of patients admitted to the hospital suspected of Acute Myocardial Infarction (AMI), the symptoms and electrocardiographic changes are inconclusive. This necessitates the use of biochemical markers of myocardial damage for correct exclusion or conformation of AMI. In this study the concept of MOEMS is applied for the detection of enzyme reaction, in which glass spectrums are scanned optically when enzyme molecules adsorb on their surface. This paper presents the optical behavior of glass spectrums under Horseradish Peroxide (HRP) enzyme reaction. The reported experimental results provide valuable information that will be useful in the development of biosensors for enzymatic detection. This paper also reports the dynamic behavior of different glass spectrums.

  7. A novel MOEMS pressure sensor: Modelling and experimental evaluation

    Indian Academy of Sciences (India)

    Patricia M Nieva; Jim Kuo; Shiuh-Huah W Chiang; Abdullah Syed

    2009-08-01

    This paper presents a novel MOEMS (Micro Opto Electromechanical Systems) pressure sensor suitable for localized precision measurements in high temperature environments. The sensor is based on a micromachined Fabry–Perot device (MFPD) that uses a thin film microcantilever beam as the top mirror and a silicon substrate as the bottom mirror of the optical microcavity. The major effect that the viscosity and density of the air surrounding the MFPD have on the viscous damping provides the mechanism for the detection of the pressure. A major advantage of this configuration is that there is no need for a sealed microcavity since the air is trapped by the viscous damping effects. The sensor has been tested up to 90 psi and pressure sensitivities of about 0·04%/psi with a MFPD sensor with a resonant frequency of about 46·7 kHz have been measured.

  8. Novel intercore-cladding lithium niobate thin film coated MOEMS fiber sensor/modulator

    Science.gov (United States)

    Jamlson, Tracee L.; Konreich, Phillip; Yu, Chung

    2005-01-01

    A MOEMS fiber modulator/sensor is fabricated by depositing a lithium niobate sol-gel thin film between the core and cladding of a fiber preform. The preform is then drawn into 125-micron fibers. Such a MOEMS modulator design is expected to enhance existing lithium niobate undersea acousto-optic sound wave detectors. In our proposed version, the lithium niobate thin film alters the ordinary silica core/cladding boundary conditions such that, when a stress or strain is applied to the fiber, the core light confinement factor changes, leading to modulation of fiber light transmission. Test results of the lithium niobate embedded fiber with a 1550-nm, 4-mW laser source revealed a reduction in light transmission with applied tension. As a comparison, using the same laser source, an ordinary silica core/cladding fiber did not exhibit any reduction in transmitted light when the same strain was applied. Further experimental work and theoretical analysis is ongoing.

  9. Novel intercore-cladding lithium niobate thin film coated MOEMS fiber sensor/modulator

    Science.gov (United States)

    Jamlson, Tracee L.; Konreich, Phillip; Yu, Chung

    2005-01-01

    A MOEMS fiber modulator/sensor is fabricated by depositing a lithium niobate sol-gel thin film between the core and cladding of a fiber preform. The preform is then drawn into 125-micron fibers. Such a MOEMS modulator design is expected to enhance existing lithium niobate undersea acousto-optic sound wave detectors. In our proposed version, the lithium niobate thin film alters the ordinary silica core/cladding boundary conditions such that, when a stress or strain is applied to the fiber, the core light confinement factor changes, leading to modulation of fiber light transmission. Test results of the lithium niobate embedded fiber with a 1550-nm, 4-mW laser source revealed a reduction in light transmission with applied tension. As a comparison, using the same laser source, an ordinary silica core/cladding fiber did not exhibit any reduction in transmitted light when the same strain was applied. Further experimental work and theoretical analysis is ongoing.

  10. Reshaping technique for MOEM system fabrication

    Science.gov (United States)

    Okyar, Murat M.; Sun, Xiqing; Carr, William N.

    1998-09-01

    Today, the fabrication of microactuators and micromechanical parts is merely based on IC fabrication technologies. However, the 2D world of microelectronics sets a limit to the 3D micromechanical world. With a new micromachining technology, reshaping, which combines advantages of 2D IC fabrication with the third dimension of the mechanical world, a surface micromachined polycrystalline structure can be deformed to any desired 3D shape. In this work, this technique is employed for the first time to realize 3D actuators, and micro-opto-electro-mechanical systems. In this work, the design, fabrication and characterization of a micromirror are discussed. The structure is reshaped in such a way that the mirror platform, which is placed between two bimorph actuators, is tilted at a desired angle. The experimental results of electro-thermally actuated structure are in good agreement with the numerical results carried out by using IntelliCAD, an FEA tool to design and simulate MEMS. The reshaped micromirror demonstrates how reshaping technology eliminates complicated, silicon area consuming actuators. The fabrication steps of the micromirror are much simpler than those of previously reported device. A barcode scanner system employing reshaped micromirrors and optical filters is proposed as one example of many possible reshaped 3D MOEM Systems.

  11. Thermally induced light-driven microfluidics using a MOEMS-based laser scanner for particle manipulation

    Science.gov (United States)

    Kremer, Matthias P.; Tortschanoff, Andreas

    2014-03-01

    One key challenge in the field of microfluidics and lab-on-a-chip experiments for biological or chemical applications is the remote manipulation of fluids, droplets and particles. These can be volume elements of reactants, particles coated with markers, cells or many others. Light-driven microfluidics is one way of accomplishing this challenge. In our work, we manipulated micrometre sized polystyrene beads in a microfluidic environment by inducing thermal flows. Therefore, the beads were held statically in an unstructured microfluidic chamber, containing a dyed watery solution. Inside this chamber, the beads were moved along arbitrary trajectories on a micrometre scale. The experiments were performed, using a MOEMS (micro-opto-electro-mechanical-systems)-based laser scanner with a variable focal length. This scanner system is integrated in a compact device, which is flexibly applicable to various microscope setups. The device utilizes a novel approach for varying the focal length, using an electrically tunable lens. A quasi statically driven MOEMS mirror is used for beam steering. The combination of a tunable lens and a dual axis micromirror makes the device very compact and robust and is capable of positioning the laser focus at any arbitrary location within a three dimensional working space. Hence, the developed device constitutes a valuable extension to manually executed microfluidic lab-on-chip experiments.

  12. Industrial packaging and assembly infrastructure for MOEMS

    Science.gov (United States)

    van Heeren, Henne

    2004-01-01

    In a mature industry all elements of the supply chain are available and are more or less in balance. Mainstream technologies are defined and well supported by a chain of specialist companies. Those specialist companies, offering services ranging from consultancy to manufacturing subcontracting, are an essential element in the industrialization. There specialization and dedication to one or a few elements in the technology increases professionalism and efficiency. The MOEMS industry however, is still in its infancy. After the birth and growth of many companies aiming at development of products, the appearance of companies aiming at the production of components and systems, we see know the first companies concentrating on the delivering of services to this industry. We can divide them in the like : * Design and Engineering companies * Foundries * Assembly and Packaging providers * Design and simulation software providers For manufacturing suppliers and customers the lack of industry standards and mainstream technologies is a serious drawback. Insight in availability and trends in technology is important to make the right choices in the field of industrialization and production. This awareness was the reason to perform a detailed study to the companies supplying commercial services in this field. This article focuses on one important part of this study: packaging and assembly. This tends to remain a bottleneck at the end of the design cycle, often delaying and sometimes preventing industrialization and commercialization. For nearly all MEMS/MST products literally everything comes together in the packaging and assembly. This is the area of full integration: electrical, mechanical, optical fluidic, magnetic etc. functionalities come together. The problems associated with the concentration of functionalities forms a big headache for the designer. Conflicting demands, of which functionality versus economics is only one, and technical hurdles have to overcome. Besides that

  13. Applied optics fundamentals and device applications nano, MOEMS, and biotechnology

    CERN Document Server

    Mentzer, Mark

    2011-01-01

    How does the field of optical engineering impact biotechnology? Perhaps for the first time, Applied Optics Fundamentals and Device Applications: Nano, MOEMS, and Biotechnology answers that question directly by integrating coverage of the many disciplines and applications involved in optical engineering, and then examining their applications in nanobiotechnology. Written by a senior U.S. Army research scientist and pioneer in the field of optical engineering, this book addresses the exponential growth in materials, applications, and cross-functional relevance of the many convergent disciplines

  14. Large stroke MOEMS actuators for optical path length modulation in miniaturized FTIR spectrometers

    Science.gov (United States)

    Sandner, Thilo; Drabe, Christian; Schenk, Harald; Kenda, Andreas

    2009-05-01

    In this paper we present a novel translatory MOEMS device with extraordinary large stroke especially designed for fast optical path modulation in an improved miniaturized Fourier-transform infrared (FTIR) spectrometer capable to perform time resolved measurements from NIR to MIR. Recently, we presented a first MOEMS based FTIR system using a different translatory MOEMS actuator with bending suspensions of the mirror plate and +/-100μm oscillation amplitude resulting in a limited spectral resolution of 30 cm-1. For the novel MOEMS actuator an advanced pantograph suspension of the mirror plate was used to guarantee an extraordinary large stroke of up to 500 μm required for an improved spectral resolution. To optimize the optical throughput of the spectrometer the mirror aperture was increased to 7 mm2. The MOEMS actuators are driven electro statically resonant using out-of-plane comb drives and operate at a resonant frequency of 500 (1000) Hz, respectively. Hence, this enables to realize an improved MOEMS based FTIR-spectrometer with a spectral resolution of up to 10 cm-1, a SNR of > 1000:1 and an acquisition time of 1 ms per spectrum of the miniaturized FTIR-system. In this article we discuss in detail the design and the experimental characteristics of the novel large stroke translatory MOEMS device. The application and system integration, especially the optical vacuum packaging, of this MOEMS device in an improved miniaturized MOEMS based FTIR spectrometer enabling ultra rapid measurements in the NIRMIR spectral region with 12cm-1 spectral resolution is discussed in a separate paper submitted to this conference.

  15. Micro-opto-electro-mechanical (MOEM) adaptive optic system

    Science.gov (United States)

    Clark, Rodney L.; Karpinisky, John R.; Hammer, Jay A.; Anderson, Roland B.; Lindsey, Randall L.; Brown, Daniel M.; Merritt, Paul H.

    1997-04-01

    This paper discusses the application of MOEM technology to adaptive optics. An experiment is described in which a micromachined mirror array is used in a closed loop adaptive optic demonstration. An interferometer wavefront sensor is used for wavefront sensing. Parallel analog electronics are used for the wavefront reconstruction. Parallel operational amplifiers are used to drive the micromirrors. The actuators utilize a novel silicon design developed by SY Technology, Inc. The actuators have a measured frequency response of 15kHz, and a maximum usable stroke of 4 microns. The entire adaptive optic demonstration has a bandwidth exceeding 10kHz. Measured performance is described. The experiments conducted are designed to explore the feasibility of creating a single chip adaptive optic system, also described in this paper. This chip would combine all on a single VLSI chip aspects of a complete adaptive optics system, wavefront sensing, wavefront reconstruction, and wavefront correction. The wavefront sensing would be accomplished with a novel compact shearing interferometer design. The analog refractive and diffractive micro optics will be fabricated using a new single step analog mask technology. The reconstruction circuit would use an analog resistive grid solver. The resistive grid would be fabricated in polysilicon. The drive circuits and micromirror actuators would use standard CMOS silicon fabrication methods.

  16. Development and investigation of MOEMS type displacement-pressure sensor for biological information monitoring

    Science.gov (United States)

    Ostasevicius, Vytautas; Malinauskas, Karolis; Janusas, Giedrius; Palevicius, Arvydas; Cekas, Elingas

    2016-04-01

    The aim of this paper is to develop and investigate MOEMS displacement-pressure sensor for biological information monitoring. Developing computational periodical microstructure models using COMSOL Multiphysics modeling software for modal and shape analysis and implementation of these results for design MOEMS displacement-pressure sensor for biological information monitoring was performed. The micro manufacturing technology of periodical microstructure having good diffraction efficiency was proposed. Experimental setup for characterisation of optical properties of periodical microstructure used for design of displacement-pressure sensor was created. Pulsating human artery dynamic characteristics in this paper were analysed.

  17. Modeling and Simulation of MOEMS Gyroscope Based on TE-TM Mode Converter

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yi; CHEN Shu-fen

    2009-01-01

    A novel structure design of micro optic electro mechanical system (MOEMS) gyroscope is presented in this paper. The structure combining surface acoustic wave (SAW) sensor, optical waveguide diffractive component, electro-optical modulator etc. is integrated on a LiNbO3 substrate as the gyroscope for sensing rotating angular velocity, and an optical readout device is added on the traditional SAW typed TE-TM mode converter as the detecting device. The principles of the MOEMS are discussed in the paper, and simulation result shows that there would be apparent advantages of higher precision and stronger anti-vibration capacity.

  18. Integrated packaging of 2D MOEMS mirrors with optical position feedback

    Science.gov (United States)

    Baumgart, M.; Lenzhofer, M.; Kremer, M. P.; Tortschanoff, A.

    2015-02-01

    Many applications of MOEMS microscanners rely on accurate position feedback. For MOEMS devices which do not have intrinsic on-chip feedback, position information can be provided with optical methods, most simply by using a reflection from the backside of a MOEMS scanner. By measuring the intensity distribution of the reflected beam across a quadrant diode, one can precisely detect the mirror's deflection angles. Previously, we have presented a position sensing device, applicable to arbitrary trajectories, which is based on the measurement of the position of the reflected laser beam with a quadrant diode. In this work, we present a novel setup, which comprises the optical position feedback functionality integrated into the device package itself. The new device's System-in-Package (SiP) design is based on a flip-folded 2.5D PCB layout and fully assembled as small as 9.2×7×4 mm³ in total. The device consists of four layers, which supply the MOEMS mirror, a spacer to provide the required optical path length, the quadrant photo-diode and a laser diode to serve as the light source. In addition to describing the mechanical setup of the novel device, we will present first experimental results and optical simulation studies. Accurate position feedback is the basis for closed-loop control of the MOEMS devices, which is crucial for some applications as image projection for example. Position feedback and the possibility of closed-loop control will significantly improve the performance of these devices.

  19. MMI-based MOEMS FT spectrometer for visible and IR spectral ranges

    Science.gov (United States)

    Al-Demerdash, Bassem M.; Medhat, Mostafa; Sabry, Yasser M.; Saadany, Bassam; Khalil, Diaa

    2014-03-01

    MEMS spectrometers have very strong potential in future healthcare and environmental monitoring applications, where Michelson interferometers are the core optical engine. Recently, MEMS Michelson interferometers based on using silicon interface as a beam splitter (BS) has been proposed [7, 8]. This allows having a monolithically-integrated on-chip FTIR spectrometer. However silicon BS exhibits high absorption loss in the visible range and high material dispersion in the near infrared (NIR) range. For this reason, we propose in this work a novel MOEMS interferometer allowing operation over wider spectral range covering both the infrared (IR) and the visible ranges. The proposed architecture is based on spatial splitting and combining of optical beams using the imaging properties of Multi-Mode Interference MMI waveguide. The proposed structure includes an optical splitter for spatial splitting an input beam into two beams and a combiner for spatial combining the two interferometer beams. A MEMS moveable mirror is provided to produce an optical path difference between the two beams. The new interferometer is fabricated using DRIE technology on an SOI wafer. The movable mirror is metalized and attached to a comb-drive actuator fabricated in the same lithography step in a self-aligned manner on chip. The novel interferometer is tested as a Fourier transform spectrometer. Red laser, IR laser and absorption spectra of different materials are measured with a resolution of 2.5 nm at 635-nm wavelength. The structure is a very compact one that allows its integration and fabrication on a large scale with very low cost.

  20. Theoretical analysis and concept demonstration of a novel MOEMS accelerometer based on Raman-Nath diffraction

    Institute of Scientific and Technical Information of China (English)

    Zhang Zuwei; Wen Zhiyu; Hu Jing

    2012-01-01

    The design and simulation of a novel microoptoelectromechanical system (MOEMS) accelerometer based on Raman-Nath diffraction are presented.The device is planned to be fabricated by microelectromechanical system technology and has a different sensing principle than the other reported MOEMS accelerometers.The fundamental theories and principles of the device are discussed in detail,a 3D finite element simulation of the flexural plate wave delay line oscillator is provided,and the operation frequency around 40 MHz is calculated.Finally,a lecture experiment is performed to demonstrate the feasibility of the device.This novel accelerometer is proposed to have the advantages of high sensitivity and anti-radiation,and has great potential for various applications.

  1. Large-scale MOEMS scanning mirror actuated by vertical comb%垂直梳齿驱动的大尺寸MOEMS扫描镜

    Institute of Scientific and Technical Information of China (English)

    刘英明; 徐静; 钟少龙; 翟雷应; 吴亚明

    2013-01-01

    A Micro-opto Electro-mechanical System(MOEMS) scanning mirror with a large size, large torsional angles and a low driving voltage actuated by a vertical comb driver was proposed. The working principle of the vertical comb driver was analyzed and its fabrication process was discussed. By u-sing a bulk micromaching process technology combined with a silicon-silicon bonding process, a vertical comb driver actuated MOEMS scanning mirror was fabricated. The fabricated scanning mirror has a size of 3 mm×2 mm, and a resonant frequency of 1.32 kHz. The test results show that the mirror has a high quality optical surface and the RMS of surface roughness is only 8.64 nm. When the driving voltage is set to be 95 V, the maximum rotation angle of the mirror is 2.4°. Furthermore, the tested turn-on responding time and turn-off responding time for the mirror are 1.887 ms and 4.418 ms, respectively.%提出了一种采用垂直梳齿驱动器驱动的大尺寸、大扭转角度、低驱动电压微光机电系统(MOEMS)扫描镜.理论分析了垂直梳齿驱动器的工作原理,研究了垂直梳齿的制作工艺,采用体硅加工工艺结合硅-硅键合工艺制作了垂直梳齿驱动的MOEMS扫描镜.制作的扫描镜镜面尺寸为3 mm×2 mm,谐振频率为1.32 kHz.测试表明,该扫描镜镜面具有很好的光学表面,其表面粗糙度的均方根只有8.64 nm;扫描镜在驱动电压为95 V时可以实现最大2.4°的扭转角度;测得其开启时的响应时间为1.887 ms,关断时的响应时间为4.418 ms.

  2. Pad-weighing test performed with standardized bladder volume

    DEFF Research Database (Denmark)

    Lose, G; Rosenkilde, P; Gammelgaard, J

    1988-01-01

    with a standardized bladder volume (50% of the cystometric bladder capacity). Twenty-five female patients with stress or mixed incontinence underwent two separate tests. Test-retest results were highly correlated (r = 0.97, p less than 0.001). Nonetheless, analysis of test-retest differences revealed a variation up...... to +/- 24 g between two tests. It is concluded that this setup (i.e., standardized bladder volume) of the one-hour pad-weighing test allows for a more reliable assessment of urinary incontinence for quantitative purposes....

  3. Acid Pit Stabilization Project (Volume 1 - Cold Testing) and (Volume 2 - Hot Testing)

    Energy Technology Data Exchange (ETDEWEB)

    G. G. Loomis (INEEL); A. P. Zdinak (MSE); M. A. Ewanic (MSE); J. J. Jessmore (INEEL)

    1998-01-01

    During the summer and fall of Fiscal Year 1997, a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Treatability Study was performed at the Idaho National Engineering and Environmental Laboratory. The study involved subsurface stabilization of a mixed waste contaminated soil site called the Acid Pit. This study represents the culmination of a successful technology development effort that spanned Fiscal Years 1994-1996. Research and development of the in situ grout stabilization technique was conducted. Hardware and implementation techniques are currently documented in a patent pending with the United States Patent and Trademark Office. The stabilization technique involved using jet grouting of an innovative grouting material to form a monolith out of the contamination zone. The monolith simultaneously provides a barrier to further contaminant migration and closes voids in the soil structure against further subsidence. This is accomplished by chemical incorporation of contaminants into less soluble species and achieving a general reduction in hydraulic conductivity within the monolith. The grout used for this study was TECT-HG, a relatively dense iron oxide-based cementitious grout. The treatability study involved cold testing followed by in situ stabilization of the Acid Pit. Volume 1 of this report discusses cold testing, performed as part of a ''Management Readiness Assessment'' in preparation for going hot. Volume 2 discusses the results of the hot Acid Pit Stabilization phase of this project. Drilling equipment was specifically rigged to reduce the spread of contamination, and all grouting was performed under a concrete block containing void space to absorb any grout returns. Data evaluation included examination of implementability of the grouting process and an evaluation of the contaminant spread during grouting. Following curing of the stabilized pit, cores were obtained and evaluated for toxicity

  4. Design and realization of retina-like three-dimensional imaging based on a MOEMS mirror

    Science.gov (United States)

    Cao, Jie; Hao, Qun; Xia, Wenze; Peng, Yuxin; Cheng, Yang; Mu, Jiaxing; Wang, Peng

    2016-07-01

    To balance conflicts for high-resolution, large-field-of-view and real-time imaging, a retina-like imaging method based on time-of flight (TOF) is proposed. Mathematical models of 3D imaging based on MOEMS are developed. Based on this method, we perform simulations of retina-like scanning properties, including compression of redundant information and rotation and scaling invariance. To validate the theory, we develop a prototype and conduct relevant experiments. The preliminary results agree well with the simulations.

  5. Nevada Test Site Summary 2006 (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Cathy Wills

    2007-10-01

    The U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) directs the management and operation of the Nevada Test Site (NTS). The NTS is the nation's historical testing site for nuclear weapons from 1951 through 1992 and is currently the nation's unique site for ongoing national-security-related missions and high-risk operations. NNSA/NSO strives to provide to the public an understanding of the current activities on the NTS, including environmental monitoring and compliance activities aimed at protecting the public and the environment from radiation hazards and from nonradiological impacts. This document is a summary of the Nevada Test Site Environmental Report (NTSER) for calendar year 2006 (see attached compact disc on inside back cover). The NTSER is a comprehensive report of environmental activities performed at the NTS and its satellite facilities over the previous calendar year. It is prepared annually to meet the requirements and guidelines of the U.S. Department of Energy (DOE) and the information needs of NNSA/NSO stakeholders. To provide an abbreviated and more readable version of the NTSER, this summary report is produced. This summary does not include detailed data tables, monitoring methods or design, a description of the NTS environment, or a discussion of all environmental program activities performed throughout the year. The reader may obtain a hard copy of the full NTSER as directed on the inside front cover of this summary report.

  6. Innovative multi-cantilever array sensor system with MOEMS read-out

    Science.gov (United States)

    Ivaldi, F.; Bieniek, T.; Janus, P.; Grabiec, P.; Majstrzyk, W.; Kopiec, D.; Gotszalk, T.

    2016-11-01

    Cantilever based sensor system are a well-established sensor family exploited in several every-day life applications as well as in high-end research areas. The very high sensitivity of such systems and the possibility to design and functionalize the cantilevers to create purpose built and highly selective sensors have increased the interest of the scientific community and the industry in further exploiting this promising sensors type. Optical deflection detection systems for cantilever sensors provide a reliable, flexible method for reading information from cantilevers with the highest sensitivity. However the need of using multi-cantilever arrays in several fields of application such as medicine, biology or safety related areas, make the optical method less suitable due to its structural complexity. Working in the frame of a the Joint Undertaking project Lab4MEMS II our group proposes a novel and innovative approach to solve this issue, by integrating a Micro-Opto-Electro-Mechanical-System (MOEMS) with dedicated optics, electronics and software with a MOEMS micro-mirror, ultimately developed in the frame of Lab4MEMSII. In this way we are able to present a closely packed, lightweight solution combining the advantages of standard optical read-out systems with the possibility of recording multiple read-outs from large cantilever arrays quasi simultaneously.

  7. Study of a high-precision SAW-MOEMS strain sensor with laser optics

    Science.gov (United States)

    Liu, Xinwei; Chen, Shufen; Li, Honglang; Zou, Zhengfeng; Fu, Lei; Meng, Yanbin

    2015-02-01

    A novel structure design of a surface acoustic wave (SAW) micro-optic-electro-mechanical-system (MOEMS) strain sensor with a light readout unit is presented in this paper. By measuring the polarization intensity ratio of the TE/TM mode outputted from the waveguide, the strain produced from an object can be measured precisely. The basic working principle of the SAW MOEMS strain sensor is introduced and the mathematical model of the strain sensor system is established. The SAW characteristics effected by the strain sensor are mathematically deduced. The coupling coefficient between the SAW modes and light modes can be calculated based on the theory of coupling modes. The conversion coefficient of polarized light modes is obtained. Due to the restrictions of the specific parameters of the device, the level of technology and the material characteristics, the sensitivity of the strain sensor system is calculated through simulation as 0.1 μɛ, with a dynamic range of 0 ~ ±50 μɛ.

  8. 21 CFR 862.1130 - Blood volume test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Blood volume test system. 862.1130 Section 862.1130 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems §...

  9. Certification Testing Methodology for Composite Structure. Volume 2. Methodology Development

    Science.gov (United States)

    1986-10-01

    J.E., "F-18 Composites Development Tests," N00019- 79-C-0044 (January 1981). 3. Stenberg , K.V., et al., "YAV-8B Composite Wing Development," Volumes I...Louis, MO 63166 (Attn: K. Stenberg , R. Garrett, R. Riley, J. Doerr). . . 4 MCDONNELL-DOUGLAS CORP., Long Beach, CA 90846 (Attn: J. Palmer

  10. Reliability of brain volume measurements: a test-retest dataset.

    Science.gov (United States)

    Maclaren, Julian; Han, Zhaoying; Vos, Sjoerd B; Fischbein, Nancy; Bammer, Roland

    2014-01-01

    Evaluation of neurodegenerative disease progression may be assisted by quantification of the volume of structures in the human brain using magnetic resonance imaging (MRI). Automated segmentation software has improved the feasibility of this approach, but often the reliability of measurements is uncertain. We have established a unique dataset to assess the repeatability of brain segmentation and analysis methods. We acquired 120 T1-weighted volumes from 3 subjects (40 volumes/subject) in 20 sessions spanning 31 days, using the protocol recommended by the Alzheimer's Disease Neuroimaging Initiative (ADNI). Each subject was scanned twice within each session, with repositioning between the two scans, allowing determination of test-retest reliability both within a single session (intra-session) and from day to day (inter-session). To demonstrate the application of the dataset, all 3D volumes were processed using FreeSurfer v5.1. The coefficient of variation of volumetric measurements was between 1.6% (caudate) and 6.1% (thalamus). Inter-session variability exceeded intra-session variability for lateral ventricle volume (P<0.0001), indicating that ventricle volume in the subjects varied between days.

  11. The modulation and demodulation module of a high resolution MOEMS accelerometer

    Science.gov (United States)

    Jiao, Xufen; Bai, Jian; Lu, Qianbo; Lou, Shuqi

    2016-02-01

    A MOEMS accelerometer with high precision based on grating interferometer is demonstrated in this paper. In order to increase the signal-to-noise ratio (SNR) and accuracy, a specific modulator and an orthogonal phase-lock demodulator are proposed. Phase modulation is introduced to this accelerometer by applying a sinusoidal signal to a piezoelectric translator (PZT) amounted to the accelerometer. Phase demodulation module consists of a circuit design and a digital design. In the circuit design, the modulated light intensity signal is converted to a voltage signal and processed. In the digital part, the demodulator is mainly composed of a Band Pass Filter, two Phase-Sensitive Detectors, a phase shifter, and two Low Pass Filters based on virtual instrument. Simulation results indicate that this approach can decrease the noise greatly, and the SNR of this demodulator is 50dB and the relative error is less than 4%.

  12. A comparative study of MOEM pressure sensors using MZI, DC, and racetrack resonator IO structures

    Science.gov (United States)

    Selvarajan, A.; Pattnaik, Prasant Kumar; Badrinarayana, T.; Srinivas, T.

    2006-03-01

    In recent years micro-electro-mechanical system (MEMS) sensors have drawn considerable attention due to their attraction in terms of miniaturization, batch fabrication and ease of integration with the required electronics circuitry. Micro-opto-electro-mechanical (MOEM) devices and systems, based on the principles of integrated optics and micromachining technology on silicon have immense potential for sensor applications. Employing optical techniques have important advantages such as functionality, large bandwidth and higher sensitivity. Pressure sensing is currently the most lucrative market for solid-state micro sensors. Pressure sensing using micromachined structures utilize the changes induced in either the resistive or capacitive properties of the electro-mechanical structure by the impressed pressure. Integrated optical pressure sensors can utilize the changes to the amplitude, phase, refractive index profile, optical path length, or polarization of the lightwave by the external pressure. In this paper we compare the performance characteristics of three types of MOEM pressure sensors based on Mach-Zehnder Interferometer (MZI), Directional Coupler (DC) and racetrack resonator (RR) integrated optical geometries. The first two configurations measure the pressure changes through a change in optical intensity while the third one measures the same in terms of frequency or wavelength change. The analysis of each sensors has been carried out in terms of mechanical and optical models and their interrelationship through optomechanical coupling. For a typical diaphragm of size 2mm × 1mm × 20 μm, normalized pressure sensitivity of 18.35 μW/mW/kPa, 29.37 μW/mW/kPa and 2.26 pm/kPa in case of MZI, DC and RR devices have been obtained respectively. The noise performance of these devices are also presented.

  13. PULSE COMBUSTOR DESIGN QUALIFICATION TEST AND CLEAN COAL FEEDSTOCK TEST - VOLUME I AND VOLUME II

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2002-02-08

    For this Cooperative Agreement, the pulse heater module is the technology envelope for an indirectly heated steam reformer. The field of use of the steam reformer pursuant to this Cooperative Agreement with DOE is for the processing of sub-bituminous coals and lignite. The main focus is the mild gasification of such coals for the generation of both fuel gas and char--for the steel industry is the main focus. An alternate market application for the substitution of metallurgical coke is also presented. This project was devoted to qualification of a 253-tube pulse heater module. This module was designed, fabricated, installed, instrumented and tested in a fluidized bed test facility. Several test campaigns were conducted. This larger heater is a 3.5 times scale-up of the previous pulse heaters that had 72 tubes each. The smaller heater has been part of previous pilot field testing of the steam reformer at New Bern, North Carolina. The project also included collection and reduction of mild gasification process data from operation of the process development unit (PDU). The operation of the PDU was aimed at conditions required to produce char (and gas) for the Northshore Steel Operations. Northshore Steel supplied the coal for the process unit tests.

  14. Test Plan Development for Plastic Ammunition Containers. Volume 1

    Science.gov (United States)

    1989-03-15

    122 xii TEST PLAN DEVELOPMENT FOR PLASTIC AM4MINITION CONTAINERS - VOLUME I 1.0 INTRODUCTION The purpose of this project...11 LA 00 Li C:0 z CP -0 133 0( LIE r r ’ D2 U)~ E C IP a g 0- L) LaLn 4’ MOIAIV3H-Q3.~f-trCYin, 20o Tabla 6-D Performance Prediction Model 155ram

  15. Trading Volume and Stock Indices: A Test of Technical Analysis

    Directory of Open Access Journals (Sweden)

    Paul Abbondante

    2010-01-01

    Full Text Available Problem statement: Technical analysis and its emphasis on trading volume has been used to analyze movements in individual stock prices and make investment recommendations to either buy or sell that stock. Little attention has been paid to investigating the relationship between trading volume and various stock indices. Approach: Since stock indices track overall stock market movements, trends in trading volume could be used to forecast future stock market trends. Instead of focusing only on individual stocks, this study will examine movements in major stock markets as a whole. Regression analysis was used to investigate the relationship between trading volume and five popular stock indices using daily data from January, 2000 to June, 2010. A lag of 5 days was used because this represents the prior week of trading volume. The total sample size ranges from 1,534-2,638 to observations. Smaller samples were used to test the investment horizon that explains movements of the indices more completely. Results: The F statistics were significant for samples using 6 and 16 months of data. The F statistic was not significant using a sample of 1 month of data. This is surprising given the short term focus of technical analysis. The results indicate that above-average returns can be achieved using futures, options and exchange traded funds which track these indices. Conclusion: Future research efforts will include out-of-sample forecasting to determine if above-average returns can be achieved. Additional research can be conducted to determine the optimal number of lags for each index.

  16. Analytical Chemistry Laboratory (ACL) procedure compendium. Volume 6, Physical testing

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    This volume contains the interim change notice for physical testing. Covered are: properties of solutions, slurries, and sludges; rheological measurement with cone/plate viscometer; % solids determination; particle size distribution by laser scanning; penetration resistance of radioactive waste; operation of differential scanning calorimeter, thermogravimetric analyzer, and high temperature DTA and DSC; sodium rod for sodium bonded fuel; filling SP-100 fuel capsules; sodium filling of BEATRIX-II type capsules; removal of alkali metals with ammonia; specific gravity of highly radioactive solutions; bulk density of radioactive granular solids; purification of Li by hot gettering/filtration; and Li filling of MOTA capsules.

  17. Measurement and Analysis of Test Suite Volume Metrics for Regression Testing

    Directory of Open Access Journals (Sweden)

    S Raju

    2014-01-01

    Full Text Available Regression testing intends to ensure that a software applications works as specified after changes made to it during maintenance. It is an important phase in software development lifecycle. Regression testing is the re-execution of some subset of test cases that has already been executed. It is an expensive process used to detect defects due to regressions. Regression testing has been used to support software-testing activities and assure acquiring an appropriate quality through several versions of a software product during its development and maintenance. Regression testing assures the quality of modified applications. In this proposed work, a study and analysis of metrics related to test suite volume was undertaken. It was shown that the software under test needs more test cases after changes were made to it. A comparative analysis was performed for finding the change in test suite size before and after the regression test.

  18. Optimizing human semen cryopreservation by reducing test vial volume and repetitive test vial sampling

    DEFF Research Database (Denmark)

    Jensen, Christian F S; Ohl, Dana A; Parker, Walter R

    2015-01-01

    OBJECTIVE: To investigate optimal test vial (TV) volume, utility and reliability of TVs, intermediate temperature exposure (-88°C to -93°C) before cryostorage, cryostorage in nitrogen vapor (VN2) and liquid nitrogen (LN2), and long-term stability of VN2 cryostorage of human semen. DESIGN: Prospec......OBJECTIVE: To investigate optimal test vial (TV) volume, utility and reliability of TVs, intermediate temperature exposure (-88°C to -93°C) before cryostorage, cryostorage in nitrogen vapor (VN2) and liquid nitrogen (LN2), and long-term stability of VN2 cryostorage of human semen. DESIGN...

  19. Theoretical simulation and experimental confirmation of duty cycle effect on stroboscopic white light interferometry for M(O)EMS dynamic characterization

    Science.gov (United States)

    Chen, Liang-Chia; Tapilouw, Abraham Mario

    2013-11-01

    Stroboscopic white light interferometry (SWLI) has been known as a useful measurement technique for vibrating samples such as micro-electro-mechanical systems (MEMS) or micro-opto-electro-mechanical systems (M(O)EMS) because it enables dynamic mode reconstruction and characterization of the tested system. An approximate model simulation without any experimental confirmation previously indicated that the duty cycle of the light could reduce the accuracy of the measurement. To provide a comprehensive insight into this important phenomenon, the study investigated theoretically and experimentally the effect of duty cycle of the light. An atomic force microscopy cantilever beam vibrating at its second resonant frequency was measured and the experimental measurements were analyzed and compared with the simulated results. In general, a reasonable correspondence between the mathematical model and the experimental measurements has been observed when the duty cycle is less than 15% and the average deviation is kept within 15.4% of the vibration amplitude. However, it is verified that the SWLI using white light LED has its physical detection limits when the cycle time of the strobed light or the light exposure time of the imaging device is more than 20%, in which the maximum measured error can significantly exceed 38.4% of the vibration amplitude.

  20. Tunable MOEMS Fabry-Perot interferometer for miniaturized spectral sensing in near-infrared

    Science.gov (United States)

    Rissanen, A.; Mannila, R.; Tuohiniemi, M.; Akujärvi, A.; Antila, J.

    2014-03-01

    This paper presents a novel MOEMS Fabry-Perot interferometer (FPI) process platform for the range of 800 - 1050 nm. Simulation results including design and optimization of device properties in terms of transmission peak width, tuning range and electrical properties are discussed. Process flow for the device fabrication is presented, with overall process integration and backend dicing steps resulting in successful fabrication yield. The mirrors of the FPI consist of LPCVD (low-pressure chemical vapor) deposited polySi-SiN λ/4-thin film Bragg reflectors, with the air gap formed by sacrificial SiO2 etching in HF vapor. Silicon substrate below the optical aperture is removed by inductively coupled plasma (ICP) etching to ensure transmission in the visible - near infra-red (NIR), which is below silicon transmission range. The characterized optical properties of the chips are compared to the simulated values. Achieved optical aperture diameter size enables utilization of the chips in both imaging as well as single-point spectral sensors.

  1. Importance of the test volume on the lag phase in biodegradation studies

    DEFF Research Database (Denmark)

    Ingerslev, F.; Torang, Lars; Nyholm, Niels

    2000-01-01

    Increasing the total volume of test medium resulted in decreased lag times (TL) in biodegradability shake flask batch tests conducted with either surface water or with synthetic mineral medium inoculated with supernatant from settled activated sludge. Experiments were performed with test volumes...... volume tended to increase the lag time, even when a single test batch was redistributed into smaller flasks. With 5 ml supernatant added to different volumes of mineral medium, lag times for PNP were independent of the test volume in a range from 10 to 1,000 ml. At small volumes of 10 ml or less...... small inoculations or with too small test volumes, biodegradation may fail randomly. A straightforward practical implication of the findings is that the test volume in biodegradability tests can significantly influence the lag time and thus sometimes be decisive for the outcome in biodegradation studies....

  2. Recovery Efficiency Test Project Phase 2 activity report, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Overbey, W.K. Jr.; Salamy, S.P.; Locke, C.D.

    1989-02-01

    The purpose of Phase II operations of the Recovery Efficiency Test Project is to enhance the natural production of the well and evaluate the relative improvement as a function of the type of stimulation conducted. Another purpose is to compare the stimulated production performance of the horizontal well with vertical wells in the field. The objectives considered for Phase II operations and plans were: (1) Develop a rationale for a systematic approach to designing stimulations for the well. (2) Conduct a series of stimulations designed to optimize the fluids, injection rates, proppant volumes and general approach to stimulating a horizontal well with similar geologic conditions. (3) Develop and test a method or methods for determining the geometry of stimulation-induced fractures. (4) Conduct tests and analyze the results to determine the efficiency of stimulation operations. The technical approach pursued in developing plans to accomplish three objectives was to: (1) Review the data needs for all objectives and obtain that data first. (2) Identify the operating geologic, geomechanical, and reservoir parameters that need additional clarification or definition. (3) Investigate existing models which could be used to plan or evaluate stimulation on the well and the reservoir. (4) Plan for analysis and verification of models and approaches.

  3. Testing large volume water treatment and crude oil ...

    Science.gov (United States)

    Report EPA’s Homeland Security Research Program (HSRP) partnered with the Idaho National Laboratory (INL) to build the Water Security Test Bed (WSTB) at the INL test site outside of Idaho Falls, Idaho. The WSTB was built using an 8-inch (20 cm) diameter cement-mortar lined drinking water pipe that was previously taken out of service. The pipe was exhumed from the INL grounds and oriented in the shape of a small drinking water distribution system. Effluent from the pipe is captured in a lagoon. The WSTB can support drinking water distribution system research on a variety of drinking water treatment topics including biofilms, water quality, sensors, and homeland security related contaminants. Because the WSTB is constructed of real drinking water distribution system pipes, research can be conducted under conditions similar to those in a real drinking water system. In 2014, WSTB pipe was experimentally contaminated with Bacillus globigii spores, a non-pathogenic surrogate for the pathogenic B. anthracis, and then decontaminated using chlorine dioxide. In 2015, the WSTB was used to perform the following experiments: • Four mobile disinfection technologies were tested for their ability to disinfect large volumes of biologically contaminated “dirty” water from the WSTB. B. globigii spores acted as the biological contaminant. The four technologies evaluated included: (1) Hayward Saline C™ 6.0 Chlorination System, (2) Advanced Oxidation Process (A

  4. Tunable External Cavity Quantum Cascade Lasers (EC-QCL): an application field for MOEMS based scanning gratings

    Science.gov (United States)

    Grahmann, Jan; Merten, André; Ostendorf, Ralf; Fontenot, Michael; Bleh, Daniela; Schenk, Harald; Wagner, Hans-Joachim

    2014-03-01

    In situ process information in the chemical, pharmaceutical or food industry as well as emission monitoring, sensitive trace detection and biological sensing applications would increasingly rely on MIR-spectroscopic anal­ysis in the 3 μm - 12 μm wavelength range. However, cost effective, portable, low power consuming and fast spectrometers with a wide tuning range are not available so far. To provide these MIR-spectrometer properties, the combination of quantum cascade lasers with a MOEMS scanning grating as wavelength selective element in the external cavity is addressed to provide a very compact and fast tunable laser source for spectroscopic analysis.

  5. Analysis and amelioration about the cross-sensitivity of a high resolution MOEMS accelerometer based on diffraction grating

    Science.gov (United States)

    Lu, Qianbo; Bai, Jian; Wang, Kaiwei; Lou, Shuqi; Jiao, Xufen; Han, Dandan

    2016-10-01

    Cross-sensitivity is a crucial parameter since it detrimentally affect the performance of an accelerometer, especially for a high resolution accelerometer. In this paper, a suite of analytical and finite-elements-method (FEM) models for characterizing the mechanism and features of the cross-sensitivity of a single-axis MOEMS accelerometer composed of a diffraction grating and a micromachined mechanical sensing chip are presented, which have not been systematically investigated yet. The mechanism and phenomena of the cross-sensitivity of this type MOEMS accelerometer based on diffraction grating differ quite a lot from the traditional ones owing to the identical sensing principle. By analyzing the models, some ameliorations and the modified design are put forward to suppress the cross-sensitivity. The modified design, achieved by double sides etching on a specific double-substrate-layer silicon-on-insulator (SOI) wafer, is validated to have a far smaller cross-sensitivity compared with the design previously reported in the literature. Moreover, this design can suppress the cross-sensitivity dramatically without compromising the acceleration sensitivity and resolution.

  6. ACARP Project C10059. ACARP manual of modern coal testing methods. Volume 2: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Sakurovs, R.; Creelman, R.; Pohl, J.; Juniper, L. [CSIRO Energy Technology, Sydney, NSW (Australia)

    2002-07-01

    The Manual summarises the purpose, applicability, and limitations of a range of standard and modern coal testing methods that have potential to assist the coal company technologist to better evaluate coal performance. It is presented in two volumes. This second volume provides more detailed information regarding the methods discussed in Volume 1.

  7. Photogrammetry and Laser Imagery Tests for Tank Waste Volume Estimates: Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Field, Jim G. [Washington River Protection Solutions, LLC, Richland, WA (United States)

    2013-03-27

    Feasibility tests were conducted using photogrammetry and laser technologies to estimate the volume of waste in a tank. These technologies were compared with video Camera/CAD Modeling System (CCMS) estimates; the current method used for post-retrieval waste volume estimates. This report summarizes test results and presents recommendations for further development and deployment of technologies to provide more accurate and faster waste volume estimates in support of tank retrieval and closure.

  8. State Assessment and Testing Programs: An Annotated ERIC Bibliography. Volume I: General References. Volume II: Individual State Programs.

    Science.gov (United States)

    Porter, Deborah Elena; Wildemuth, Barbara

    There is a growing body of literature in the ERIC data base pertaining to state educational assessment and testing programs. Volume I of this bibliography includes abstracts of 39 documents and journal articles describing the design and implementation of programs, as well as the technical and political issues which have been addressed by the…

  9. Job Performance Tests for CH-53A/D Helicopter Mechanics. Volume 1. Hands-On Performance Test.

    Science.gov (United States)

    performance test, and a second volume presents the administrative duties and job knowledge tests.... JPM( Job Performance Measurement), Marine Corps personnel, Mechanics, Performance(Human), Performance tests, Test methods....Hands-on performance tests and job knowledge tests were developed for MOS 6113 (CH-53A/D helicopter mechanic) as part of the Marine Corps Job ... Performance Measurement Project. The purpose of this information memorandum is to disseminate these performance measures to Marine Corps personnel managers

  10. Breakdown Tests of Composite Materials, and the Importance of the Volume Effect

    DEFF Research Database (Denmark)

    Madsen, Søren Find; Holbøll, Joachim; Henriksen, Mogens

    2005-01-01

    High voltage testing of inhomogeneous composite materials often shows that the stressed volume has a great influence on the result. This paper tries to develop methods of estimating the stressed volume by calculating the theoretical extent of streamer propagation along insulating surfaces....... A dynamical numerical model of a certain test setup is used to predict the actual volume tested depending on electrode geometry and peak impulse voltage. The geometry of the test setup as well as the thickness of the Glass Fibre Reinforced Polymer (GFRP) has been varied....

  11. Textiles and Design Library of Test Items. Volume I.

    Science.gov (United States)

    Smith, Jan, Ed.

    As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items of value from past tests are made available to teachers for the construction of unit tests, term examinations or as a basis for class discussion. Each collection is reviewed for content validity and reliability. The test…

  12. Testing and Evaluating C3I Systems That Employ AI. Volume 1. Handbook for Testing Expert Systems

    Science.gov (United States)

    1991-01-31

    implements the multiattribute utility analysis ( MAUA ) framework for testing and evaluating expert systems described in Volume 1. Volume 1 is intended as...our methods may wish to skim Chapter 7, "Pulling It All Together," first. He or she may then wish to review the attributes in the MAUA hierarchy...presented in the latter half of Chapter 3, "Proposed MAUA Framework for Testing and Evaluating Expert Systems." A detailed example of the method is given

  13. A 2x2 multi-chip reconfigurable MOEMS mask: a stepping stone to large format microshutter arrays for coded aperture applications

    Science.gov (United States)

    McNie, Mark E.; Brown, Alan G.; King, David O.; Smith, Gilbert W.; Gordon, Neil T.; Riches, Stephen; Rogers, Stanley

    2010-08-01

    Coded aperture imaging has been used for astronomical applications for several years. Typical implementations used a fixed mask pattern and are designed to operate in the X-Ray or gamma ray bands. Recently applications have emerged in the visible and infra red bands for low cost lens-less imaging systems and system studies have shown that considerable advantages in image resolution may accrue from the use of multiple different images of the same scene - requiring a reconfigurable mask. Previously reported work focused on realising a 2x2cm single chip mask in the mid-IR based on polysilicon micro-optoelectro- mechanical systems (MOEMS) technology and its integration with ASIC drive electronics using conventional wire bonding. It employs interference effects to modulate incident light - achieved by tuning a large array of asymmetric Fabry-Perot optical cavities via an applied voltage and uses a hysteretic row/column scheme for addressing. In this paper we report on the latest results in the mid-IR for the single chip reconfigurable MOEMS mask, trials in scaling up to a mask based on a 2x2 multi-chip array and report on progress towards realising a large format mask comprising 44 MOEMS chips. We also explore the potential of such large, transmissive IR spatial light modulator arrays for other applications and in the current and alternative architectures.

  14. Supercritical water oxidation data acquisition testing. Final report, Volume I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    This report discusses the phase one testing of a data acquisition system for a supercritical water waste oxidation system. The system is designed to destroy a wide range of organic materials in mixed wastes. The design and testing of the MODAR Oxidizer is discussed. An analysis of the optimized runs is included.

  15. LNG cascading damage study. Volume I, fracture testing report.

    Energy Technology Data Exchange (ETDEWEB)

    Petti, Jason P.; Kalan, Robert J.

    2011-12-01

    As part of the liquefied natural gas (LNG) Cascading Damage Study, a series of structural tests were conducted to investigate the thermal induced fracture of steel plate structures. The thermal stresses were achieved by applying liquid nitrogen (LN{sub 2}) onto sections of each steel plate. In addition to inducing large thermal stresses, the lowering of the steel temperature simultaneously reduced the fracture toughness. Liquid nitrogen was used as a surrogate for LNG due to safety concerns and since the temperature of LN{sub 2} is similar (-190 C) to LNG (-161 C). The use of LN{sub 2} ensured that the tests could achieve cryogenic temperatures in the range an actual vessel would encounter during a LNG spill. There were four phases to this test series. Phase I was the initial exploratory stage, which was used to develop the testing process. In the Phase II series of tests, larger plates were used and tested until fracture. The plate sizes ranged from 4 ft square pieces to 6 ft square sections with thicknesses from 1/4 inches to 3/4 inches. This phase investigated the cooling rates on larger plates and the effect of different notch geometries (stress concentrations used to initiate brittle fracture). Phase II was divided into two sections, Phase II-A and Phase II-B. Phase II-A used standard A36 steel, while Phase II-B used marine grade steels. In Phase III, the test structures were significantly larger, in the range of 12 ft by 12 ft by 3 ft high. These structures were designed with more complex geometries to include features similar to those on LNG vessels. The final test phase, Phase IV, investigated differences in the heat transfer (cooling rates) between LNG and LN{sub 2}. All of the tests conducted in this study are used in subsequent parts of the LNG Cascading Damage Study, specifically the computational analyses.

  16. Coal-water-slurry evaluation. Volume 1. Laboratory tests. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Daley, R.D.; Farthing, G.A.; Vecci, S.J.

    1984-02-01

    This is the first of three volumes describing the multi-phase coal-water slurry (CWS) test program. This volume contains the guideline CWS specifications and suggested test procedures for CWS characterization. The guideline specifications are generic and are not boiler or site specific. The specifications address CWS solids content, viscosity, amount of material less than 200-mesh (75 microns), amount of material greater than 50-mesh (300 microns), volatile matter content, and sodium content of the ash. The suggested analytical test methods are summarized including special test modifications or comments as specifically related to CWSs. The detailed analytical test procedures for CWSs are also presented in appendix A. For completeness, detailed analytical test procedures for coal characterization are also provided in appendix B. This volume also includes an Executive Summary and description of the overall test program. 5 figures, 2 tables.

  17. Hanna, Wyoming underground coal gasification data base. Volume 3. The Hanna II, Phase I field test

    Energy Technology Data Exchange (ETDEWEB)

    Bartke, T.C.; Fischer, D.D.; King, S.B.; Boyd, R.M.; Humphrey, A.E.

    1985-08-01

    This report is part of a seven-volume series on the Hanna, Wyoming, underground coal gasification field tests. Volume 1 is a summary of the project, and each of Volumes 2 through 6 describes a particular test. Volume 7 is a compilation of all the data for the tests in Volumes 2 through 6. Hanna II, Phase I was conducted during the spring and summer of 1975, at a site about 700 feet up dip (to the southwest) of the Hanna I test. The test was conducted in two stages - Phase IA and IB. Phase IA consisted of linking and gasification operations between Wells 1 and 3 and Phase IB of linking from the 1-3 gasification zone to Well 2, followed by a short period of gasification from Well 2 to Well 3 over a broad range of air injection rates, in order to determine system turndown capabilities and response times. This report covers: (1) site selection and characteristics; (2) test objectives; (3) facilities description; (4) pre-operational testing; (5) test operations summary; and (6) post-test activity. 7 refs., 11 figs., 8 tabs.

  18. Science Library of Test Items. Volume Eleven. Mastery Testing Programme. [Mastery Tests Series 3.] Tests M27-M38.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 27 through 38 include: (27) reading a grid plan; (28) identifying common invertebrates; (29) characteristics of invertebrates; (30) identifying elements; (31) using scientific notation part I; (32) classifying minerals; (33) predicting the…

  19. Mechanical testing of advanced coating system, volume 1

    Science.gov (United States)

    Cruse, T. A.; Nagy, A.; Popelar, C. F.

    1990-01-01

    The Electron Beam Physical Vapor Deposition (EBPVD) coating material has a highly columnar microstructure, and as a result it was expected to have very low tensile strength. To be able to fabricate the required compression and tensile specimens, a substrate was required to provide structural integrity for the specimens. Substrate and coating dimensions were adjusted to provide sufficient sensitivity to resolve the projected loads carried by the EBPVD coating. The use of two distinctively different strain transducer systems, for tension and compression loadings, mandated two vastly different specimen geometries. Compression specimen and tensile specimen geometries are given. Both compression and tensile test setups are described. Data reduction mathematical models are given and discussed in detail as is the interpretation of the results. Creep test data is also given and discussed.

  20. Repetitive Cyclic Potentiodynamic Polarization Scan Results for Reduced Sample Volume Testing

    Energy Technology Data Exchange (ETDEWEB)

    LaMothe, Margaret E. [Washington River Protection Solutions, Richland, WA (United States)

    2016-03-15

    This report is the compilation of data gathered after repetitively testing simulated tank waste and a radioactive tank waste sample using a cyclic potentiodynamic polarization (CPP) test method to determine corrosion resistance of metal samples. Electrochemistry testing of radioactive tank samples is often used to assess the corrosion susceptibility and material integrity of waste tank steel. Repetitive testing of radiological tank waste is occasionally requested at 222-S Laboratory due to the limited volume of radiological tank sample received for testing.

  1. Theoretical test of Jarzynski's equality for reversible volume-switching processes of an ideal gas system.

    Science.gov (United States)

    Sung, Jaeyoung

    2007-07-01

    We present an exact theoretical test of Jarzynski's equality (JE) for reversible volume-switching processes of an ideal gas system. The exact analysis shows that the prediction of JE for the free energy difference is the same as the work done on the gas system during the reversible process that is dependent on the shape of path of the reversible volume-switching process.

  2. Optimisation of forensic genetics procedures used in disputed paternity testing: adjustment of the PCR reaction volume.

    Science.gov (United States)

    Marjanović, Damir; Bakal, Narcisa; Kovacević, Lejla; Hodzić, Melisa; Haverić, Anja; Haverić, Sanin; Ibrulj, Slavica; Durmić, Adaleta

    2006-05-01

    Standard molecular techniques, with only a slight modification, are very useful in obtaining and interpreting the final results in the field of forensic genetic. Data obtained through such analysis are highly reliable and can be used as a very powerful tool that produces valuable results. However, success and swiftness of DNA typing of biological evidence either that found at a crime scene or used in disputed paternity testing, depends on the optimization of numerous factors. One of the most important and critical phases that ensures reliability of the whole procedure is the choice of the most suitable volume for the amplification protocol. Buccal swabs were collected from volunteers. DNA was extracted by Qiagen Dnaeasy Tissue Kit. PowerPlex 16 kit was used to simultaneously amplify 15 STR loci by PCR. Amplification was carried out as described previously. The tested total working reaction volumes were 5, 10 and 25 microl. The PCR amplification was carried out in PE Gene Amp PCR System Thermal Cycler (ABI, Foster City, CA). Amplification products were analyzed on an ABI PRISM 377 instrument (ABI, Foster City, CA) in 5% bis-acrilamide gel. Amplification was generally successful for all the tested reaction volumes. Lower partial to complete DNA profiles ratio, the quality of obtained STR profiles, significantly reduced amount of reaction's components give advantage to 5 microl reaction volume over other two tested volumes in this case.

  3. Ocean Thermal Energy Conversion (OTEC) test facilities study program. Final report. Volume II. Part A

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-17

    Results are presented of an 8-month study to develop alternative non-site-specific OTEC facilities/platform requirements for an integrated OTEC Test Program which may include land and floating test facilities. The document, Volume II - Appendixes is bound in three parts (A, B, and C) which together comprise a compendium of the most significant detailed data developed during the study. Part A contains definitions, baseline revisions, test plans, and energy utilization sections.

  4. Underground Test Area Subproject Phase I Data Analysis Task. Volume IV - Hydrologic Parameter Data Documentation Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-09-01

    Volume IV of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the hydrologic parameter data. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  5. Underground Test Area Subproject Phase I Data Analysis Task. Volume VII - Tritium Transport Model Documentation Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-12-01

    Volume VII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the tritium transport model documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  6. Underground Test Area Subproject Phase I Data Analysis Task. Volume VIII - Risk Assessment Documentation Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-12-01

    Volume VIII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the risk assessment documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  7. Underground Test Area Subproject Phase I Data Analysis Task. Volume VI - Groundwater Flow Model Documentation Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-11-01

    Volume VI of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the groundwater flow model data. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  8. [Interpretation and use of routine pulmonary function tests: Spirometry, static lung volumes, lung diffusion, arterial blood gas, methacholine challenge test and 6-minute walk test].

    Science.gov (United States)

    Bokov, P; Delclaux, C

    2016-02-01

    Resting pulmonary function tests (PFT) include the assessment of ventilatory capacity: spirometry (forced expiratory flows and mobilisable volumes) and static volume assessment, notably using body plethysmography. Spirometry allows the potential definition of obstructive defect, while static volume assessment allows the potential definition of restrictive defect (decrease in total lung capacity) and thoracic hyperinflation (increase in static volumes). It must be kept in mind that this evaluation is incomplete and that an assessment of ventilatory demand is often warranted, especially when facing dyspnoea: evaluation of arterial blood gas (searching for respiratory insufficiency) and measurement of the transfer coefficient of the lung, allowing with the measurement of alveolar volume to calculate the diffusing capacity of the lung for CO (DLCO: assessment of alveolar-capillary wall and capillary blood volume). All these pulmonary function tests have been the subject of an Americano-European Task force (standardisation of lung function testing) published in 2005, and translated in French in 2007. Interpretative strategies for lung function tests have been recommended, which define abnormal lung function tests using the 5th and 95th percentiles of predicted values (lower and upper limits of normal values). Thus, these recommendations need to be implemented in all pulmonary function test units. A methacholine challenge test will only be performed in the presence of an intermediate pre-test probability for asthma (diagnostic uncertainty), which is an infrequent setting. The most convenient exertional test is the 6-minute walk test that allows the assessment of walking performance, the search for arterial desaturation and the quantification of dyspnoea complaint.

  9. Fabrication, testing, and analysis of anisotropic carbon/glass hybrid composites: volume 1: technical report.

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, Kyle K. (Wetzel Engineering, Inc. Lawrence, Kansas); Hermann, Thomas M. (Wichita state University, Wichita, Kansas); Locke, James (Wichita state University, Wichita, Kansas)

    2005-11-01

    Anisotropic carbon/glass hybrid composite laminates have been fabricated, tested, and analyzed. The laminates have been fabricated using vacuum-assisted resin transfer molding (VARTM). Five fiber complexes and a two-part epoxy resin system have been used in the study to fabricate panels of twenty different laminate constructions. These panels have been subjected to physical testing to measure density, fiber volume fraction, and void fraction. Coupons machined from these panels have also been subjected to mechanical testing to measure elastic properties and strength of the laminates using tensile, compressive, transverse tensile, and in-plane shear tests. Interlaminar shear strength has also been measured. Out-of-plane displacement, axial strain, transverse strain, and inplane shear strain have also been measured using photogrammetry data obtained during edgewise compression tests. The test data have been reduced to characterize the elastic properties and strength of the laminates. Constraints imposed by test fixtures might be expected to affect measurements of the moduli of anisotropic materials; classical lamination theory has been used to assess the magnitude of such effects and correct the experimental data for the same. The tensile moduli generally correlate well with experiment without correction and indicate that factors other than end constraints dominate. The results suggest that shear moduli of the anisotropic materials are affected by end constraints. Classical lamination theory has also been used to characterize the level of extension-shear coupling in the anisotropic laminates. Three factors affecting the coupling have been examined: the volume fraction of unbalanced off-axis layers, the angle of the off-axis layers, and the composition of the fibers (i.e., carbon or glass) used as the axial reinforcement. The results indicate that extension/shear coupling is maximized with the least loss in axial tensile stiffness by using carbon fibers oriented 15{sup

  10. Measurement of testicular volume in smaller testes: how accurate is the conventional orchidometer?

    Science.gov (United States)

    Lin, Chih-Chieh; Huang, William J S; Chen, Kuang-Kuo

    2009-01-01

    The aim of this study was to evaluate the accuracy of different methods, including the Seager orchidometer (SO) and ultrasonography (US), for assessing testicular volume of smaller testes (testes volume less than 18 mL). Moreover, the equations used for the calculations--the Hansen formula (length [L] x width [W](2) x 0.52, equation A), the prolate ellipsoid formula (L x W x height [H] x 0.52, equation B), and the Lambert equation (L x W x H x 0.71, equation C)--were also examined and compared with the gold standard testicular volume obtained by water displacement (Archimedes principle). In this study, 30 testes from 15 men, mean age 75.3 (+/-8.3) years, were included. They all had advanced prostate cancer and were admitted for orchiectomy. Before the procedure, all the testes were assessed using SO and US. The dimensions were then input into each equation to obtain the volume estimates. The testicular volume by water displacement was 8.1 +/- 3.5 mL. Correlation coefficients (R(2)) of the 2 different methods (SO, US) to the gold standard were 0.70 and 0.85, respectively. The calculated testicular volumes were 9.2 +/- 3.9 mL (measured by SO, equation A), 11.9 +/- 5.2 mL (measured by SO, equation C), 7.3 +/- 4.2 mL (measured by US, equation A), 6.5 +/- 3.3 mL (measured by US, equation B) and 8.9 +/- 4.5 mL (measured by US, equation C). Only the mean size measured by US and volume calculated with the Hansen equation (equation A) and the mean size measured by US and volume calculated with the Lambert equation (equation C) showed no significant differences when compared with the volumes estimated by water displacement (mean difference 0.81 mL, P = .053, and 0.81 mL, P = .056, respectively). Based on our measurements, we categorized testicular volume by different cutoff values (7.0 mL, 7.5 mL, 8.0 mL, and 8.5 mL) to calculate a new constant for use in the Hansen equation. The new constant was 0.59. We then reexamined the equations using the new 0.59 constant, and found

  11. ACARP Project C10059. ACARP manual of modern coal testing methods. Volume 1: The manual

    Energy Technology Data Exchange (ETDEWEB)

    Sakurovs, R.; Creelman, R.; Pohl, J.; Juniper, L. [CSIRO Energy Technology, Sydney, NSW (Australia)

    2002-07-01

    The Manual summarises the purpose, applicability, and limitations of a range of standard and modern coal testing methods that have potential to assist the coal company technologist to better evaluate coal performance. The first volume sets out the Modern Coal Testing Methods in summarised form that can be used as a quick guide to practitioners to assist in selecting the best technique to solve their problems.

  12. Pulmonary function tests correlated with thoracic volumes in adolescent idiopathic scoliosis.

    Science.gov (United States)

    Ledonio, Charles Gerald T; Rosenstein, Benjamin E; Johnston, Charles E; Regelmann, Warren E; Nuckley, David J; Polly, David W

    2017-01-01

    Scoliosis deformity has been linked with deleterious changes in the thoracic cavity that affect pulmonary function. The causal relationship between spinal deformity and pulmonary function has yet to be fully defined. It has been hypothesized that deformity correction improves pulmonary function by restoring both respiratory muscle efficiency and increasing the space available to the lungs. This research aims to correlate pulmonary function and thoracic volume before and after scoliosis correction. Retrospective correlational analysis between thoracic volume modeling from plain x-rays and pulmonary function tests was conducted. Adolescent idiopathic scoliosis patients enrolled in a multicenter database were sorted by pre-operative Total Lung Capacities (TLC) % predicted values from their Pulmonary Function Tests (PFT). Ten patients with the best and ten patients with the worst TLC values were included. Modeled thoracic volume and TLC values were compared before and 2 years after surgery. Scoliosis correction resulted in an increase in the thoracic volume for patients with the worst initial TLCs (11.7%) and those with the best initial TLCs (12.5%). The adolescents with the most severe pulmonary restriction prior to surgery strongly correlated with post-operative change in total lung capacity and thoracic volume (r(2)  = 0.839; p pulmonary function, but no correlation was found in cases with normal pulmonary function. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:175-182, 2017.

  13. A New DFT Architecture to Reduce Test Data Volume and Test Application Time

    OpenAIRE

    Ling, Zhang; Jishun, Kuang; Junjin, Mei

    2016-01-01

    This paper proposes a new DFT Architecture that contains three test scan modes. The test data could be interval broadcast to scan chains whenever the data in corresponding locations are compatible. Compared with the conventional broadcast scan architecture, the proposed architecture achieves better compression ratio in all cases, and the test application time is also induced. The hardware overhead is very low. Both theoretical and experimental results prove efficacy and versatility of the pro...

  14. Verifying seismic design of nuclear reactors by testing. Volume 1: test plan

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-20

    This document sets forth recommendations for a verification program to test the ability of operational nuclear power plants to achieve safe shutdown immediately following a safe-shutdown earthquake. The purpose of the study is to develop a program plan to provide assurance by physical demonstration that nuclear power plants are earthquake resistant and to allow nuclear power plant operators to (1) decide whether tests should be conducted on their facilities, (2) specify the tests that should be performed, and (3) estimate the cost of the effort to complete the recommended test program.

  15. Improved method for collection of sputum for tuberculosis testing to ensure adequate sample volumes for molecular diagnostic testing.

    Science.gov (United States)

    Fisher, Mark; Dolby, Tania; Surtie, Shireen; Omar, Gaironesa; Hapeela, Nchimunya; Basu, Debby; DeWalt, Abby; Kelso, David; Nicol, Mark; McFall, Sally

    2017-04-01

    The quality and quantity of sputum collected has an important impact on the laboratory diagnosis of pulmonary TB. We conducted a pilot study to assess a new collection cups for the collection of sputum for the diagnosis of pulmonary tuberculosis. The pilot study utilized the standard collection cup in South Africa demonstrating a mean collection volume of 2.86±2.36SDml for 198 samples; 19% of the specimens contained 5ml. We designed and tested two novel sputum cups with a narrow bottom section and clear minimum and maximum markings to allow patients and clinicians to know whether sufficient sputum volume has been produced. The cups differed in their shape and manufacturing approach. The two options also support different mixing approaches being considered for a highly sensitive companion TB-screening assay being developed at Northwestern University (XtracTB assay). Sputum was collected from 102 patients at Nolungile Youth Centre, Khayelitsha, Cape Town, South Africa for a total of 204 samples. The mean volumes collected from the two cups were 2.70±0.88SDml and 2.88±0.89SDml. While the mean volumes of current and novel cups are similar, the volume ranges collected with the novel cups were narrower, and 98% of the specimen volumes were within the target range. Only 4 samples contained >5ml, but none were >6ml, and none of the specimens contained <1ml. The number of coughs that produced the samples, patient HIV and TB status plus qualitative descriptions of the sputum specimens were also evaluated.

  16. Reduction of contrast medium volume in abdominal aorta CTA: Multiphasic injection technique versus a test bolus volume

    Energy Technology Data Exchange (ETDEWEB)

    Nijhof, Wouter H., E-mail: w.h.nijhof@student.utwente.nl [University of Twente, MIRA-Institute for Biomedical Technology and Technical Medicine, P.O. Box 21, 7500 AE Enschede (Netherlands); Vos, Charlotte S. van der, E-mail: c.s.vandervos@student.utwente.nl [University of Twente, MIRA-Institute for Biomedical Technology and Technical Medicine, P.O. Box 21, 7500 AE Enschede (Netherlands); Anninga, Bauke, E-mail: b.anninga@student.utwente.nl [University of Twente, MIRA-Institute for Biomedical Technology and Technical Medicine, P.O. Box 21, 7500 AE Enschede (Netherlands); Jager, Gerrit J., E-mail: g.jager@JBZ.nl [Department of Radiology, Jeroen Bosch Hospital, Henri Dunantstraat 1, 5223 GZ ’s-Hertogenbosch (Netherlands); Rutten, Matthieu J.C.M., E-mail: mj.rutten@online.nl [Department of Radiology, Jeroen Bosch Hospital, Henri Dunantstraat 1, 5223 GZ ’s-Hertogenbosch (Netherlands)

    2013-09-15

    Objective: The purpose of this study is to reduce the administered contrast medium volume in abdominal CTA by using a test bolus injection, with the preservation of adequate quantitative and qualitative vessel enhancement. Study design: For this technical efficacy study 30 patients, who were referred for a CTA examination of the abdominal aorta, were included. Randomly 15 patients were assigned to undergo a multiphasic injection protocol and received 89 mL of contrast medium (Optiray 350) (protocol I). Fifteen patients were assigned to the test bolus injection protocol (protocol II), which implies injection of a 10 mL test bolus of Optiray 350 prior to performing CTA with a 40 mL of contrast medium. Quantitative assessment of vascular enhancement was performed by measuring the amount of Hounsfield Units in the aorta at 30 positions from the celiac trunk to the iliac arteries in both groups. Qualitative assessment was performed by three radiologists who scored the images at a 5-point scale. Results: Quantitative assessment showed that there was no significant difference in vascular enhancement for patients between the two protocols, with mean attenuation values of 280.9 ± 50.84 HU and 258.60 ± 39.28 HU, respectively. The image quality of protocol I was rated 4.31 (range: 3.67/5.00) and of protocol II 4.11 (range: 2.67/5.00). These differences were not statistically significant. Conclusion: This study showed that by using a test bolus injection and the administration of 50 mL of contrast medium overall, CTA of the abdominal aorta can reliably be performed, with regard to quantitative and qualitative adequate vessel enhancement.

  17. Job Performance Tests for U/AH-1 Helicopter Mechanics. Volume 1: Hands- On Performance Test

    Science.gov (United States)

    1991-11-01

    Hands-on performance tests and job knowledge tests were developed for MOS 6114 (U/AH-1 helicopter mechanic) as part of the Marine Corps Job ... Performance Measurement Project. The purpose of this information memorandum is to disseminate these performance measures to Marine Corps personnel managers

  18. Shuttle active thermal control system development testing. Volume 7: Improved radiator coating adhesive tests

    Science.gov (United States)

    Reed, M. W.

    1973-01-01

    Silver/Teflon thermal control coatings have been tested on a modular radiator system projected for use on the space shuttle. Seven candidate adhesives have been evaluated in a thermal vacuum test on radiator panels similar to the anticipated flight hardware configuration. Several classes of adhesives based on polyester, silicone, and urethane resin systems were tested. These included contact adhesives, heat cured adhesives, heat and pressure cured adhesives, pressure sensitive adhesives, and two part paint on or spray on adhesives. The coatings attached with four of the adhesives, two silicones and two urethanes, had no changes develop during the thermal vacuum test. The two silicone adhesives, both of which were applied to the silver/Teflon as transfer laminates to form a tape, offered the most promise based on application process and thermal performance. Each of the successful silicone adhesives required a heat and pressure cure to adhere during the cryogenic temperature excursion of the thermal-vacuum test.

  19. DETERMINATION OF THE AGR-1 CAPSULE TO FPMS SPECTROMETER TRANSPORT VOLUMES FROM LEADOUT FLOW TEST DATA

    Energy Technology Data Exchange (ETDEWEB)

    J. K. Hartwell; J. B. Walter; D. M. Scates; M. W. Drigert

    2007-05-01

    The AGR-1 experiment is a fueled multiple-capsule irradiation experiment being conducted in the Advanced Test Reactor (ATR) in support of the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. A flow experiment conducted during the AGR-1 irradiation provided data that included the effect of flow rate changes on the decay of a short-lived radionuclide (23Ne). This data has been analyzed to determine the capsule-specific downstream transport volume through which the capsule effluents must pass before arrival at the fission product monitoring system spectrometers. These resultant transport volumes when coupled with capsule outlet flow rates determine the transport times from capsule-to-detector. In this work an analysis protocol is developed and applied in order to determine capsule-specific transport volumes to precisions of better than +/- 7%.

  20. Coal-water-slurry evaluation. Volume 2. Laboratory and combustion test results. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Daley, R.D.; Farthing, G.A.; Vecci, S.J.

    1984-02-01

    This is the second of three volumes describing a multi-phase coal-water slurry (CWS) test program. This volume presents the results of laboratory, atomization, and combustion tests which were performed on six slurries and their parent coals. The objectives of these tests was to establish laboratory test procedures for evaluating CWS fuels, to investigate relationships between laboratory properties and CWS combustion and handling characteristics and to develop preliminary guidelines for CWS specifications. These tests showed that the preparation processes and chemical additives used by the slurry manufacturers had a significant effect on viscosity and atomization properties. The most important factor for good combustion performance was droplet size, but droplet size did not correlate with viscosity measured at low shear rates in the laboratory tests. It was also found that some slurries had greater fouling potential than their parent coals due to the use of sodium-containing additives. Tests were also conducted to determine whether the slurries could be transported and stored without coal settling. These tests showed that little settling occurred during either transportation or storage for at least three weeks. 98 figures, 27 tables.

  1. Software Reliability, Measurement, and Testing. Volume 2. Guidebook for Software Reliability Measurement and Testing

    Science.gov (United States)

    1992-04-01

    test experiments. Of the three static techniques, 200-4 SOFTWARE TEST TECHNIQUES ST Code Review A Error/ Anamoly Detection T I Structure...anomaly is an unforeseen event , which may not be detected by error-protection mechanisms in time to prevent system failure. The existence of extensive... event , the more difficult it is to make a meaningful prediction. As an example, it can be seen that the reliability of an electronic equipment is known

  2. Large-aperture MOEMS Fabry-Perot interferometer for miniaturized spectral imagers

    Science.gov (United States)

    Rissanen, Anna; Langner, Andreas; Viherkanto, Kai; Mannila, Rami

    2015-02-01

    VTT's optical MEMS Fabry-Perot interferometers (FPIs) are tunable optical filters, which enable miniaturization of spectral imagers into small, mass producible hand-held sensors with versatile optical measurement capabilities. FPI technology has also created a basis for various hyperspectral imaging instruments, ranging from nanosatellites, environmental sensing and precision agriculture with UAVs to instruments for skin cancer detection. Until now, these application demonstrations have been mostly realized with piezo-actuated FPIs fabricated by non-monolithical assembly method, suitable for achieving very large optical apertures and with capacity to small-to-medium volumes; however large-volume production of MEMS manufacturing supports the potential for emerging spectral imaging applications also in large-volume applications, such as in consumer/mobile products. Previously reported optical apertures of MEMS FPIs in the visible range have been up to 2 mm in size; this paper presents the design, successful fabrication and characterization of MEMS FPIs for central wavelengths of λ = 500 nm and λ = 650 nm with optical apertures up to 4 mm in diameter. The mirror membranes of the FPI structures consist of ALD (atomic layer deposited) TiO2-Al2O3 λ/4- thin film Bragg reflectors, with the air gap formed by sacrificial polymer etching in O2 plasma. The entire fabrication process is conducted below 150 °C, which makes it possible to monolithically integrate the filter structures on other ICdevices such as detectors. The realized MEMS devices are aimed for nanosatellite space application as breadboard hyperspectral imager demonstrators.

  3. Test methods for evaluating solid waste. Volume 1A through 1C, and Volume 2. Field manual physical/chemical methods (3rd edition)

    Energy Technology Data Exchange (ETDEWEB)

    1986-09-01

    This manual provides test procedures that may be used to evaluate those properties of a solid waste that determine whether the waste is a hazardous waste within the definition of Section 3001 of the Resource Conservation and Recovery Act (PL 94-580). These methods are approved for obtaining data to satisfy the requirement of 40 CFR Part 261, Identification and Listing of Hazardous Waste. Volume IA deals with quality control, selection of appropriate test methods, and analytical methods for metallic species. Volume IB consists of methods for organic analytes. Volume IC includes a variety of test methods for miscellaneous analytes and properties for use in evaluating the waste characteristics. Volume II deals with sample acquisition and includes quality control, sampling-plan design and implementation, and field-sampling methods.

  4. Development of a Model Job Performance Test for a Combat Occupational Specialty. Volume I. Test Development

    Science.gov (United States)

    1975-11-01

    from a national guard armory In western New Mexico . The unit runs approxlmently 200 men armed with the latest aggressor weapons. They have been...Agcy, Bathasda, ATTN: MOCA -MR 1 USA Concept Anel Agcy, Bethesda, ATTN: MOCA -JF 1 USA Artie Test Ctr, APO Seattle, ATTN: STEAC-MOASL 1 USA Artie

  5. A Reliability Test on PBGA Packaging Through Piezoresistive Stress Sensor

    OpenAIRE

    Liu, C.-H.; Chung, H.; Yang, D.-W.; Tseng, K.-F.; Lwo, B.-J.

    2009-01-01

    ISBN: 978-2-35500-009-6; Plastic packaging is the mainstream on microelectronic packaging technology at present. As the continuous requirements for smaller but higher density products, failure and reliability issues on MEMS/MOEMS packaging because of the hygroscopic swelling mismatch stress become more and more serious. To this end, this paper presented the stress monitoring methodologies as well as the reliability tests on a typical PBGA (Plastic Ball-Grid-Array) packaging due to hygroscopic...

  6. An abbreviated repeat dose and reproductive/developmental toxicity test for high production volume chemicals

    Energy Technology Data Exchange (ETDEWEB)

    Scala, R.A.; Bevan, C.; Beyer, B.K. (Exxon Biomedical Sciences, Inc., East Millstone, NJ (United States))

    1992-08-01

    A novel protocol is described for obtaining preliminary data on repeated dose systemic effects and reproductive/developmental toxicity. The test protocol was developed by a group of experts at the request of the U.S. Environmental Protection Agency (EPA) for use as part of a Screening Information Data Set on high production volume chemicals. Interest in this protocol is shared by several regulatory agencies, including the Organization for Economic Cooperation, the European Community, and the EPA. To validate the study protocol, ethylene glycol monomethyl ether (EGME) was used. After a dosing period of approximately 6 weeks, EGME showed both systemic and reproductive/developmental effects similar to those previously reported using standard protocols. Thus, this test protocol may be used as a screening tool for high production volume chemicals.

  7. Cultural Resources Survey, Harry S. Truman Dam and Reservoir Project, Missouri. Volume 8. Archeological Test Excavations: 1976

    Science.gov (United States)

    1983-02-01

    Analysis Euro-American Settlement Site Testing Rock Shelters Environmental Studies Osage River Sac River Pomme de Terre River Grand River...interpretation of the Euro-American settlement of the lower Pomme de Terre River valley. Volume VII is a study of the re- sults of preliminary testing at...several sites in the lower Pomme de Terre River valley. Volume VITI contains the results of excavations in rock shelters along the Osage River. Volume

  8. Parallel approach to MEMS and micro-optics interferometric testing

    Science.gov (United States)

    Kujawińska, M.; Beer, S.; Gastinger, K.; Gorecki, C.; Haugholt, K. H.; Józwik, M.; Lambelet, P.; Paris, R.; Styk, A.; Zeitner, U.

    2011-08-01

    The paper presents the novel approach to an interferometric, quantitative, massive parallel inspection of MicroElectroMechanicalSystems (MEMS), MicroOptoElectroMechanical Systems (MOEMS) and microoptics arrays. The basic idea is to adapt a micro-optical probing wafer to the M(O)EMS wafer under test. The probing wafer is exchangeable and contains one of the micro-optical interferometer arrays based on: (1) a low coherent interferometer array based on a Mirau configuration or (2) a laser interferometer array based on a Twyman-Green configuration. The optical, mechanical, and electro-optical design of the system and data analysis concept based on this approach is presented. The interferometer arrays are developed and integrated at a standard test station for micro-fabrication together with the illumination and imaging modules and special mechanics which includes scanning and electrostatic excitation systems. The smart-pixel approach is applied for massive parallel electro-optical detection and data reduction. The first results of functional tests of the system are presented. The concept is discussed in reference to the future M(O)EMS and microoptics manufacturers needs and requirements.

  9. Cryogenic tests of volume-phase holographic gratings: results at 100 K

    CERN Document Server

    Tamura, N; Luke, P; Blackburn, C; Robertson, D J; Dipper, N A; Sharples, R M; Allington-Smith, J R; Tamura, Naoyuki; Murray, Graham J.; Luke, Peter; Blackburn, Colin; Robertson, David J.; Dipper, Nigel A.; Sharples, Ray M.; Allington-Smith, Jeremy R.

    2006-01-01

    We present results from cryogenic tests of Volume-Phase Holographic(VPH) gratings at 100 K. The aims of these tests are to see whether the diffraction efficiency as a function of wavelength is significantly different at a low temperature from that at room temperature and to see how the performance of a VPH grating is affected by a number of thermal cycles. We have completed 10 cycles between room temperature and 100 $K$, and find no clear evidence that the diffraction efficiency changes with temperature or with successive thermal cycle.

  10. Small Volume Dissolution Testing as a Powerful Method during Pharmaceutical Development

    Directory of Open Access Journals (Sweden)

    Eric Beyssac

    2010-11-01

    Full Text Available Standard compendia dissolution apparatus are the first choice for development of new dissolution methods. Nevertheless, limitations coming from the amount of material available, analytical sensitivity, lack of discrimination or biorelevance may warrant the use of non compendial methods. In this regard, the use of small volume dissolution methods offers strong advantages. The present study aims primarily to evaluate the dissolution performance of various drug products having different release mechanisms, using commercially available small volume USP2 dissolution equipment. The present series of tests indicate that the small volume dissolution is a useful tool for the characterization of immediate release drug product. Depending on the release mechanism, different speed factors are proposed to mimic common one liter vessel performance. In addition, by increasing the discriminating power of the dissolution method, it potentially improves know how about formulations and on typical events which are evaluated during pharmaceutical development such as ageing or scale–up. In this regard, small volume dissolution is a method of choice in case of screening for critical quality attributes of rapidly dissolving tablets, where it is often difficult to detect differences using standard working conditions.

  11. Low energy prompt gamma-ray tests of a large volume BGO detector

    Energy Technology Data Exchange (ETDEWEB)

    Naqvi, A.A., E-mail: aanaqvi@kfupm.edu.sa [Department of Physics, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia); Kalakada, Zameer [Department of Civil Engineering, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia); Al-Anezi, M.S.; Raashid, M.; Khateeb-ur-Rehman [Department of Physics, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia); Maslehuddin, M. [Center for Engineering Research, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia); Garwan, M.A. [Department of Physics, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia)

    2012-01-15

    Tests of a large volume Bismuth Germinate (BGO) detector were carried out to detect low energy prompt gamma-rays from boron and cadmium-contaminated water samples using a portable neutron generator-based Prompt Gamma Neutron Activation Analysis (PGNAA) setup. Inspite of strong interference between the sample- and the detector-associated prompt gamma-rays, an excellent agreement has been observed between the experimental and calculated yields of the prompt gamma-rays, indicating successful application of the large volume BGO detector in the PGNAA analysis of bulk samples using low energy prompt gamma-rays. - Highlights: Black-Right-Pointing-Pointer Performance tests of a portable neutron generator based PGNAA setup for field measurement. Black-Right-Pointing-Pointer Application of large volume BGO detector in prompt gamma analysis of bulk samples utilizing low energy prompt-gamma rays. Black-Right-Pointing-Pointer Study of interference of boron and cadmium prompt gamma-rays from bulk samples with BGO detector background spectrum.

  12. Robust design of an inkjet-printed capacitive sensor for position tracking of a MOEMS-mirror in a Michelson interferometer setup

    Science.gov (United States)

    Faller, Lisa-Marie; Zangl, Hubert

    2017-05-01

    To guarantee high performance of Micro Optical Electro Mechanical Systems (MOEMS), precise position feedback is crucial. To overcome drawbacks of widely used optical feedback, we propose an inkjet-printed capacitive position sensor as smart packaging solution. Printing processes suffer from tolerances in excess of those from standard processes. Thus, FEM simulations covering assumed tolerances of the system are adopted. These simulations are structured following a Design Of Computer Experiments (DOCE) and are then employed to determine a optimal sensor design. Based on the simulation results, statistical models are adopted for the dynamic system. These models are to be used together with specifically designed hardware, considered to cope with challenging requirements of ≍50nm position accuracy at 10MS/s with 1000μm measurement range. Noise analysis is performed considering the influence of uncertainties to assess resolution and bandwidth capabilities.

  13. Novel Bonding technologies for wafer-level transparent packaging of MOEMS

    CERN Document Server

    Kirchberger, H; Wimpliger, M

    2008-01-01

    Depending on the type of Micro-Electro-Mechanical System (MEMS), packaging costs are contributing up to 80% of the total device cost. Each MEMS device category, its function and operational environment will individually dictate the packaging requirement. Due to the lack of standardized testing procedures, the reliability of those MEMS packages sometimes can only be proven by taking into consideration its functionality over lifetime. Innovation with regards to cost reduction and standardization in the field of packaging is therefore of utmost importance to the speed of commercialisation of MEMS devices. Nowadays heavily driven by consumer applications the MEMS device market is forecasted to enjoy a compound annual growth rate (CAGR) above 13%, which is when compared to the IC device market, an outstanding growth rate. Nevertheless this forecasted value can drift upwards or downwards depending on the rate of innovation in the field of packaging. MEMS devices typically require a specific fabrication process wher...

  14. Wind-electric icemaking project: Analysis and dynamometer testing. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Holz, R; Gervorgian, V; Drouilhet, S; Muljadi, E

    1998-07-01

    The wind/hybrid systems group at the National Renewable Energy Laboratory has been researching the most practical and cost-effective methods for producing ice from off-grid wind-electric power systems. The first phase of the project, conducted in 1993--1994, included full-scale dynamometer and field testing of two different electric ice makers directly connected to a permanent magnet alternator. The results of that phase were encouraging and the second phase of the project was launched in which steady-state and dynamic numerical models of these systems were developed and experimentally validated. The third phase of the project was the dynamometer testing of the North Star ice maker, which is powered by a 12-kilowatt Bergey Windpower Company, Inc., alternator. This report describes both the second and third project phases. Also included are detailed economic analyses and a discussion of the future prospects of wind-electric ice-making systems. The main report is contained in Volume 1. Volume 2 consists of the report appendices, which include the actual computer programs used in the analysis and the detailed test results.

  15. Feasibility tests on concrete with very-high-volume supplementary cementitious materials.

    Science.gov (United States)

    Yang, Keun-Hyeok; Jeon, Yong-Su

    2014-01-01

    The objective of this study is to examine the compressive strength and durability of very high-volume SCM concrete. The prepared 36 concrete specimens were classified into two groups according to their designed 28-day compressive strength. For the high-volume SCM, the FA level was fixed at a weight ratio of 0.4 and the GGBS level varied between the weight ratio of 0.3 and 0.5, which resulted in 70-90% replacement of OPC. To enhance the compressive strength of very high-volume SCM concrete at an early age, the unit water content was controlled to be less than 150 kg/m(3), and a specially modified polycarboxylate-based water-reducing agent was added. Test results showed that as SCM ratio (R SCM) increased, the strength gain ratio at an early age relative to the 28-day strength tended to decrease, whereas that at a long-term age increased up to R SCM of 0.8, beyond which it decreased. In addition, the beneficial effect of SCMs on the freezing-and-thawing and chloride resistances of the concrete decreased at R SCM of 0.9. Hence, it is recommended that R SCM needs to be restricted to less than 0.8-0.85 in order to obtain a consistent positive influence on the compressive strength and durability of SCM concrete.

  16. Validation of Noninvasive MOEMS-Assisted Measurement System Based on CCD Sensor for Radial Pulse Analysis

    Directory of Open Access Journals (Sweden)

    Rolanas Dauksevicius

    2013-04-01

    Full Text Available Examination of wrist radial pulse is a noninvasive diagnostic method, which occupies a very important position in Traditional Chinese Medicine. It is based on manual palpation and therefore relies largely on the practitioner’s subjective technical skills and judgment. Consequently, it lacks reliability and consistency, which limits practical applications in clinical medicine. Thus, quantifiable characterization of the wrist pulse diagnosis method is a prerequisite for its further development and widespread use. This paper reports application of a noninvasive CCD sensor-based hybrid measurement system for radial pulse signal analysis. First, artery wall deformations caused by the blood flow are calibrated with a laser triangulation displacement sensor, following by the measurement of the deformations with projection moiré method. Different input pressures and fluids of various viscosities are used in the assembled artificial blood flow system in order to test the performance of laser triangulation technique with detection sensitivity enhancement through microfabricated retroreflective optical element placed on a synthetic vascular graft. Subsequently, the applicability of double-exposure whole-field projection moiré technique for registration of blood flow pulses is considered: a computational model and representative example are provided, followed by in vitro experiment performed on a vascular graft with artificial skin atop, which validates the suitability of the technique for characterization of skin surface deformations caused by the radial pulsation.

  17. Packaging solutions for MEMS/MOEMS using thin films as mechanical components

    Science.gov (United States)

    Boyle, P.; Syms, Richard R. A.; Moore, David F.

    2002-04-01

    Optoelectronic subsystems are becoming increasingly important to reduce the costs of assembly and packaging. The mechanical properties of vapor-deposited thin films can be used to advantage; for example three-micrometer thick silicon nitride microclips to hold single mode optic fibers in place in silicon V-shaped grooves. This paper describes the proposed use of pairs of thin film microcantilevers to precisely locate an optic component such as a filter or a mirror in an optical bench. In this configuration the precision of the lithographic process for the cantilevers determines the exact location of the component in the package, and to first order the etched shape in the substrate is unimportant. Simulation software based on variational principles has been developed to examine the behavior of structures undergoing large-scale elastic deflections. The design software consists of spreadsheet front end to enter parameters, and then Visual Basic (VBA) code and Frontline 'solver' software to run simulations. The fabrication process is described for 5 micrometers thick silicon carbide beams which are then tested by bending them using a surface profiler (such as a Dektak) to deflect the fifty micrometer wide silicon nitride cantilevers through large angles. The possible consequences for more efficient optoelectronic packaging are briefly assessed.

  18. 77 FR 28281 - Withdrawal of Revocation of TSCA Section 4 Testing Requirements for One High Production Volume...

    Science.gov (United States)

    2012-05-14

    ... issue of March 16, 2012 (77 FR 15609) (FRL-9335-6). If you have questions regarding the applicability of... One High Production Volume Chemical Substance AGENCY: Environmental Protection Agency (EPA). ACTION... production volume chemicals (HPV1). * * * * * (j) * * * Table 2--Chemical Substances and Testing...

  19. Open-source software for demand forecasting of clinical laboratory test volumes using time-series analysis

    Directory of Open Access Journals (Sweden)

    Emad A Mohammed

    2017-01-01

    Full Text Available Background: Demand forecasting is the area of predictive analytics devoted to predicting future volumes of services or consumables. Fair understanding and estimation of how demand will vary facilitates the optimal utilization of resources. In a medical laboratory, accurate forecasting of future demand, that is, test volumes, can increase efficiency and facilitate long-term laboratory planning. Importantly, in an era of utilization management initiatives, accurately predicted volumes compared to the realized test volumes can form a precise way to evaluate utilization management initiatives. Laboratory test volumes are often highly amenable to forecasting by time-series models; however, the statistical software needed to do this is generally either expensive or highly technical. Method: In this paper, we describe an open-source web-based software tool for time-series forecasting and explain how to use it as a demand forecasting tool in clinical laboratories to estimate test volumes. Results: This tool has three different models, that is, Holt-Winters multiplicative, Holt-Winters additive, and simple linear regression. Moreover, these models are ranked and the best one is highlighted. Conclusion: This tool will allow anyone with historic test volume data to model future demand.

  20. Open-source Software for Demand Forecasting of Clinical Laboratory Test Volumes Using Time-series Analysis.

    Science.gov (United States)

    Mohammed, Emad A; Naugler, Christopher

    2017-01-01

    Demand forecasting is the area of predictive analytics devoted to predicting future volumes of services or consumables. Fair understanding and estimation of how demand will vary facilitates the optimal utilization of resources. In a medical laboratory, accurate forecasting of future demand, that is, test volumes, can increase efficiency and facilitate long-term laboratory planning. Importantly, in an era of utilization management initiatives, accurately predicted volumes compared to the realized test volumes can form a precise way to evaluate utilization management initiatives. Laboratory test volumes are often highly amenable to forecasting by time-series models; however, the statistical software needed to do this is generally either expensive or highly technical. In this paper, we describe an open-source web-based software tool for time-series forecasting and explain how to use it as a demand forecasting tool in clinical laboratories to estimate test volumes. This tool has three different models, that is, Holt-Winters multiplicative, Holt-Winters additive, and simple linear regression. Moreover, these models are ranked and the best one is highlighted. This tool will allow anyone with historic test volume data to model future demand.

  1. Blade system design studies volume II : preliminary blade designs and recommended test matrix.

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Dayton A. (Global Energy Concepts, LLC, Kirkland, WA)

    2004-06-01

    As part of the U.S. Department of Energy's Wind Partnerships for Advanced Component Technologies (WindPACT) program, Global Energy Concepts, LLC is performing a Blade System Design Study (BSDS) concerning innovations in materials, processes and structural configurations for application to wind turbine blades in the multi-megawatt range. The BSDS Volume I project report addresses issues and constraints identified to scaling conventional blade designs to the megawatt size range, and evaluated candidate materials, manufacturing and design innovations for overcoming and improving large blade economics. The current report (Volume II), presents additional discussion of materials and manufacturing issues for large blades, including a summary of current trends in commercial blade manufacturing. Specifications are then developed to guide the preliminary design of MW-scale blades. Using preliminary design calculations for a 3.0 MW blade, parametric analyses are performed to quantify the potential benefits in stiffness and decreased gravity loading by replacement of a baseline fiberglass spar with carbon-fiberglass hybrid material. Complete preliminary designs are then presented for 3.0 MW and 5.0 MW blades that incorporate fiberglass-to-carbon transitions at mid-span. Based on analysis of these designs, technical issues are identified and discussed. Finally, recommendations are made for composites testing under Part I1 of the BSDS, and the initial planned test matrix for that program is presented.

  2. Cryogenic Tests of Volume-Phase Holographic Gratings: I. Results at 200 K

    CERN Document Server

    Tamura, N; Luke, P N; Blackburn, C; Robertson, D J; Dipper, N A; Sharples, R M; Allington-Smith, J R; Tamura, Naoyuki; Murray, Graham J.; Luke, Peter; Blackburn, Colin; Robertson, David J.; Dipper, Nigel A.; Sharples, Ray M.; Allington-Smith, Jeremy R.

    2003-01-01

    We present results from cryogenic tests of a Volume-Phase Holographic (VPH) grating at 200 K measured at near-infrared wavelengths. The aims of these tests were to see whether the diffraction efficiency and angular dispersion of a VPH grating are significantly different at a low temperature from those at a room temperature, and to see how many cooling and heating cycles the grating can withstand. We have completed 5 cycles between room temperature and 200 K, and find that the performance is nearly independent of temperature, at least over the temperature range which we are investigating. In future, we will not only try more cycles between these temperatures but also perform measurements at a much lower temperature (e.g., 80 K).

  3. The measurement of peripheral blood volume reactions to tilt test by the electrical impedance technique after exercise in athletes

    Science.gov (United States)

    Melnikov, A. A.; Popov, S. G.; Nikolaev, D. V.; Vikulov, A. D.

    2013-04-01

    We have investigated the distribution of peripheral blood volumes in different regions of the body in response to the tilt-test in endurance trained athletes after aerobic exercise. Distribution of peripheral blood volumes (ml/beat) simultaneously in six regions of the body (two legs, two hands, abdomen, neck and ECG) was assessed in response to the tilt-test using the impedance method (the impedance change rate (dZ/dT). Before and after exercise session cardiac stroke (CSV) and blood volumes in legs, arms and neck were higher in athletes both in lying and standing positions. Before exercise the increase of heart rate and the decrease of a neck blood volume in response to tilting was lower (p blood volumes was higher (pblood volumes were similar. Also, the neck blood volumes as percentage of CSV (%/CSV) did not change in the control but increased in athletes (p exercise (mean HR = 156±8 beat/min, duration 30 min) blood volumes in neck and arms in response to the tilting were reduced equally, but abdomen (pblood volumes (p blood flow (%/CSV) did not change in athletes but decreased in control (pexercise. The data demonstrate greater orthostatic tolerance in athletes both before and after exercise during fatigue which is due to effective distribution of blood flows aimed at maintaining cerebral blood flow.

  4. Prototypical Rod Consolidation Demonstration Project. Phase 3, Final report: Volume 1, Cold checkout test report, Book 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 1 discusses the following topics: the background of the project; test program description; summary of tests and test results; problem evaluation; functional requirements confirmation; recommendations; and completed test documentation for tests performed in Phase 3.

  5. Test Facilities Capability Handbook: Volume 1 - Stennis Space Center (SSC); Volume 2 - Marshall Space Flight Center (MSFC)

    Science.gov (United States)

    Hensarling, Paula L.

    2007-01-01

    The John C. Stennis Space Center (SSC) is located in Southern Mississippi near the Mississippi-Louisiana state line. SSC is chartered as the National Aeronautics and Space Administration (NASA) Center of Excellence for large space transportation propulsion system testing. This charter has led to many unique test facilities, capabilities and advanced technologies provided through the supporting infrastructure. SSC has conducted projects in support of such diverse activities as liquid, and hybrid rocket testing and development; material development; non-intrusive plume diagnostics; plume tracking; commercial remote sensing; test technology and more. On May 30, 1996 NASA designated SSC the lead center for rocket propulsion testing, giving the center total responsibility for conducting and/or managing all NASA rocket engine testing. Test services are now available not only for NASA but also for the Department of Defense, other government agencies, academia, and industry. This handbook was developed to provide a summary of the capabilities that exist within SSC. It is intended as a primary resource document, which will provide the reader with the top-level capabilities and characteristics of the numerous test facilities, test support facilities, laboratories, and services. Due to the nature of continually evolving programs and test technologies, descriptions of the Center's current capabilities are provided. Periodic updates and revisions of this document will be made to maintain its completeness and accuracy.

  6. Fuel combustion test in constant volume combustion chamber with built-in adaptor

    Institute of Scientific and Technical Information of China (English)

    JEONG; DongSoo; CHO; GyuBack; CHOI; SuJin; LEE; JinSoo

    2010-01-01

    Combustion tests of pre-mixture of methane and air in constant volume combustion chamber(CVCC) have been carried out by means of flame propagation photo and gas pressure measurement,the effects of CVCC body temperature,intake pressure of pre-mixture of methane and air,equivalence ratio and location of the built-in adaptor have been investigated.The whole combustion chamber can be divided into two parts,i.e.the upper combustion chamber and the lower combustion chamber,by the built-in adaptor with through hole.Owing to the built-in adaptor with through hole,jet ignition or compression ignition(auto-ignition) phenomena may occur in the lower combustion chamber,which is helpful to getting higher flame propagation velocity,higher combustion peak pressure,low cycle-to-cycle variation and more stable combustion process.

  7. Prototypical Rod Construction Demonstration Project. Phase 3, Final report: Volume 1, Cold checkout test report, Book 3

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 3 discusses the following topics: Downender Test Results and Analysis Report; NFBC Canister Upender Test Results and Analysis Report; Fuel Assembly Handling Fixture Test Results and Analysis Report; and Fuel Canister Upender Test Results and Analysis Report.

  8. Boundary conditions for convergent radial tracer tests and effect of well bore mixing volume

    Science.gov (United States)

    Zlotnik, Vitaly A.; David Logan, J.

    Convergent radial flow tracer tests have a complex spatial nonaxial transport structure caused by the flow in the vicinity of the injection well and its finite mixing volume. The formulation of the boundary value problem, and especially the treatment of the boundary conditions at the injection well, is nontrivial. Hodgkinson and Lever [1983], Moench [1989, 1991], and Welty and Gelhar [1994] have developed different models and methods for the analysis of breakthrough curves in the extraction well. To extend interpretation techniques to breakthrough curves in the zone between injection and extraction wells, an analysis of conventional transport models is given, and improved boundary conditions are formulated for a convergent radial tracer test problem. The formulation of the boundary conditions is based upon a more detailed analysis of the kinematic flow structure and tracer mass balance in the neighborhood of the injection well. Two practical applications of revised boundary conditions for field data analysis are given. First, the note explains anomalous high well bore mixing volumes of injection wells found by Cady et al. [1993] and allows one to establish the role of mixing versus other processes (retardation, matrix diffusion, etc.). Second, it is shown that the improper use of Moench's [1989] model can produce bias in the characteristics of breakthrough curves in the extraction well under conditions that involve a significant mixing factor in the injection well. A numerical example indicates an error in peak concentrations on a breakthrough curve by as much as 70% and in peak arrival time by 10% for Peclet numbers Pe=102. The effect becomes slightly less significant for Pe=1.

  9. Inconsistent detection of changes in cerebral blood volume by near infrared spectroscopy in standard clinical tests.

    Science.gov (United States)

    Canova, D; Roatta, S; Bosone, D; Micieli, G

    2011-06-01

    The attractive possibility of near infrared spectroscopy (NIRS) to noninvasively assess cerebral blood volume and oxygenation is challenged by the possible interference from extracranial tissues. However, to what extent this may affect cerebral NIRS monitoring during standard clinical tests is ignored. To address this issue, 29 healthy subjects underwent a randomized sequence of three maneuvers that differently affect intra- and extracranial circulation: Valsalva maneuver (VM), hyperventilation (HV), and head-up tilt (HUT). Putative intracranial ("i") and extracranial ("e") NIRS signals were collected from the forehead and from the cheek, respectively, and acquired together with cutaneous plethysmography at the forehead (PPG), cerebral blood velocity from the middle cerebral artery, and arterial blood pressure. Extracranial contribution to cerebral NIRS monitoring was investigated by comparing Beer-Lambert (BL) and spatially resolved spectroscopy (SRS) blood volume indicators [the total hemoglobin concentration (tHb) and the total hemoglobin index, (THI)] and by correlating their changes with changes in extracranial circulation. While THIe and tHbe generally provided concordant indications, tHbi and THIi exhibited opposite-sign changes in a high percentage of cases (VM: 46%; HV: 31%; HUT: 40%). Moreover, tHbi was correlated with THIi only during HV (P < 0.05), not during VM and HUT, while it correlated with PPG in all three maneuvers (P < 0.01). These results evidence that extracranial circulation may markedly affect BL parameters in a high percentage of cases, even during standard clinical tests. Surface plethysmography at the forehead is suggested as complementary monitoring helpful in the interpretation of cerebral NIRS parameters.

  10. Development testing of large volume water sprays for warm fog dispersal

    Science.gov (United States)

    Keller, V. W.; Anderson, B. J.; Burns, R. A.; Lala, G. G.; Meyer, M. B.; Beard, K. V.

    1986-01-01

    A new brute-force method of warm fog dispersal is described. The method uses large volume recycled water sprays to create curtains of falling drops through which the fog is processed by the ambient wind and spray induced air flow. Fog droplets are removed by coalescence/rainout. The efficiency of the technique depends upon the drop size spectra in the spray, the height to which the spray can be projected, the efficiency with which fog laden air is processed through the curtain of spray, and the rate at which new fog may be formed due to temperature differences between the air and spray water. Results of a field test program, implemented to develop the data base necessary to assess the proposed method, are presented. Analytical calculations based upon the field test results indicate that this proposed method of warm fog dispersal is feasible. Even more convincingly, the technique was successfully demonstrated in the one natural fog event which occurred during the test program. Energy requirements for this technique are an order of magnitude less than those to operate a thermokinetic system. An important side benefit is the considerable emergency fire extinguishing capability it provides along the runway.

  11. Recovery Efficiency Test Project Phase 2 activity report, Volume 1. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Overbey, W.K. Jr.; Salamy, S.P.; Locke, C.D.

    1989-02-01

    The purpose of Phase II operations of the Recovery Efficiency Test Project is to enhance the natural production of the well and evaluate the relative improvement as a function of the type of stimulation conducted. Another purpose is to compare the stimulated production performance of the horizontal well with vertical wells in the field. The objectives considered for Phase II operations and plans were: (1) Develop a rationale for a systematic approach to designing stimulations for the well. (2) Conduct a series of stimulations designed to optimize the fluids, injection rates, proppant volumes and general approach to stimulating a horizontal well with similar geologic conditions. (3) Develop and test a method or methods for determining the geometry of stimulation-induced fractures. (4) Conduct tests and analyze the results to determine the efficiency of stimulation operations. The technical approach pursued in developing plans to accomplish three objectives was to: (1) Review the data needs for all objectives and obtain that data first. (2) Identify the operating geologic, geomechanical, and reservoir parameters that need additional clarification or definition. (3) Investigate existing models which could be used to plan or evaluate stimulation on the well and the reservoir. (4) Plan for analysis and verification of models and approaches.

  12. Volume magnetization for system-level testing of magnetic materials within small satellites

    Science.gov (United States)

    Gerhardt, David T.; Palo, Scott E.

    2016-10-01

    Passive Magnetic Attitude Control (PMAC) is a popular among small satellites due to its low resource cost and simplicity of installation. However, predicting the performance of these systems can be a challenge, chiefly due to the difficulty of measurement and simulation of hysteresis materials. We present a low-cost method of magnetic measurement allowing for characterization of both hard and soft magnetic materials. A Helmholtz cage uniformly magnetizes a 30 cm×30 cm×30 cm test volume. The addition of a thin sense coil allows this system to characterize individual hysteresis rod performance when in close proximity to other hard and/or soft magnetic materials. This test setup is applied to hard and soft magnetic materials used aboard the Colorado Student Space Weather Experiment (CSSWE), a 3U CubeSat for space weather investigation which used a PMAC system. The measured hard magnet dipole of 0.80±0.017 A m2 is in good agreement with the dynamics-based satellite dipole moment fits. Five hysteresis rods from the same set as the CSSWE flight rods are tested; significant differences in dampening abilities are found. In addition, a limitation of the widely-used Flatley model is described. The interaction of two hysteresis rods in a variety of relative geometries are tested; perpendicular rods are found to have no significant interaction while parallel rods could have their dampening ability reduced by half, depending on the rod separation distance. Finally, the performance of the hysteresis rods are measured in their flight configuration, with hard and soft magnetic material dispersed as it is on CSSWE itself. For the CSSWE PMAC system design, interactions between rods have a greater affect than the magnetic flux density offset due to the onboard bar magnet.

  13. Prototypical Rod Consolidation Demonstration Project. Phase 3, Final report: Volume 1, Cold checkout test report, Book 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 2 discusses the following topics: Fuel Rod Extraction System Test Results and Analysis Reports and Clamping Table Test Results and Analysis Reports.

  14. S-2 stage 1/25 scale model base region thermal environment test. Volume 1: Test results, comparison with theory and flight data

    Science.gov (United States)

    Sadunas, J. A.; French, E. P.; Sexton, H.

    1973-01-01

    A 1/25 scale model S-2 stage base region thermal environment test is presented. Analytical results are included which reflect the effect of engine operating conditions, model scale, turbo-pump exhaust gas injection on base region thermal environment. Comparisons are made between full scale flight data, model test data, and analytical results. The report is prepared in two volumes. The description of analytical predictions and comparisons with flight data are presented. Tabulation of the test data is provided.

  15. Underground Test Area Subproject Phase I Data Analysis Task. Volume III - Groundwater Recharge and Discharge Data Documentation Package

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-10-01

    Volume III of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the data covering groundwater recharge and discharge. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

  16. Dual axis radiographic hydrodynamic test facility. Final environmental impact statement, Volume 2: Public comments and responses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    On May 12, 1995, the U.S. Department of Energy (DOE) issued the draft Dual Axis Radiographic Hydrodynamic Test Facility Environmental Impact Statement (DARHT EIS) for review by the State of New Mexico, Indian Tribes, local governments, other Federal agencies, and the general public. DOE invited comments on the accuracy and adequacy of the draft EIS and any other matters pertaining to their environmental reviews. The formal comment period ran for 45 days, to June 26, 1995, although DOE indicated that late comments would be considered to the extent possible. As part of the public comment process, DOE held two public hearings in Los Alamos and Santa Fe, New Mexico, on May 31 and June 1, 1995. In addition, DOE made the draft classified supplement to the DARHT EIS available for review by appropriately cleared individuals with a need to know the classified information. Reviewers of the classified material included the State of New Mexico, the U.S. Environmental Protection Agency, the Department of Defense, and certain Indian Tribes. Volume 2 of the final DARHT EIS contains three chapters. Chapter 1 includes a collective summary of the comments received and DOE`s response. Chapter 2 contains the full text of the public comments on the draft DARHT EIS received by DOE. Chapter 3 contains DOE`s responses to the public comments and an indication as to how the comments were considered in the final EIS.

  17. Maximum tolerated volume in drinking tests with water and a nutritional beverage for the diagnosis of functional dyspepsia

    Institute of Scientific and Technical Information of China (English)

    Aldo Monta(n)o-Loza; Max Schmulson; Sergio Zepeda-Gómez; Jose Maria Remes-Troche; Miguel Angel Valdovinos-Diaz

    2005-01-01

    AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD patients and controls in a Mexican population. METHODS: Twenty FD-Rome Ⅱ patients were matched by age and gender with 20 healthy controls. All underwent both drinking tests at a 15 mL/min rate, randomly, 7 d apart. Every 5 min within each test, four symptoms were evaluated (satiety, bloating, nausea and pain) by Likert scales. Maximum tolerated volume (MTV) was defined as the ingested volume when a score of 5 was reached for any symptom or when the test had to be stopped because the patients could not tolerate more volume. Sensitivity and specificity were analyzed. RESULTS: FD patients had higher symptom scores for both tests compared to controls (water: t= 4.1, P= 0.001 <0.01; Nutren(R): t= 5.2, P= 0.001<0.01). The MTV forwater and Nutren(R) were significantly lower in FD (water: 1014±288 vs 1749±275 mL; t = 7.9, P = 0.001<0.01;Nutren(R): 652±168 vs 1278±286 mL; t= 6.7, P = 0.001<0.01). With the volume tolerated by the controls, the percentile 10 was determined as the lower limit fortolerance. Sensitivity and specificity were 0.90, 0.95 for water and 0.95, 0.95 for Nutren(R) tests.CONCLUSION: A drinking test with water or a nutritional beverage can discriminate between FD patients and healthy subjects in Mexico, with high sensitivity and specificity. These tests could be used as objective, noninvasive, and safe diagnostic approaches for FD patients.

  18. Flight Test Measurement Techniques for Laminar Flow. Volume 23(Les techniques de mesure en vol des ecoulements laminaires)

    Science.gov (United States)

    2003-10-01

    aspects of Volume 1 and 2 of the original Flight Test Manual , including the flight testing of aircraft systems. The monographs in this series (with the...N. Alemdaroglu, Middle East Technical University, Ankara, Turkey, Prof. L.M.B. da Costa Campos, Instituto Superior Tecnico , Lisboa Codex, Portugal...Defence Research Establishment ITALIE Česká republika Ryvangs Allé 1, P.O. Box 2715 Centro di Documentazione DK-2100 Copenhagen Ø Tecnico

  19. AGARD Flight Test Technique Series. Volume 15. Introduction to Avionics Flight Test (Introduction aux Essais des Systemes D’armes)

    Science.gov (United States)

    1996-03-01

    features and thus angular. As a simplistic example, a the signal to noise characteristics of picket fence could be modeled with a the sensor can be...Volume Plans, by Anon., 1992. 12, 1980. 66. U. S. Navy Report No. 533, 54. Smith, Sidney L. and Mosier, Jane Anthropometry of Naval Aviators, N

  20. Fluidized-bed combustion 1000-hour test program. Volume IV. Engineering details and post-test inspections

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, A. G.; Barker, S. N.; Phillips, R. N.; Pillai, K. K.; Raven, P.; Wood, P.

    1981-09-01

    Volume IV of the report on the 1000 hour programme consists of three appendices giving details of the enginmering/construction aspects of the plant and reports from Stal-Laval Turbin A.B. Appendix N has been entered individually. (LTN)

  1. Test functions for three-dimensional control-volume mixed finite-element methods on irregular grids

    Science.gov (United States)

    Naff, R.L.; Russell, T.F.; Wilson, J.D.; ,; ,; ,; ,; ,

    2000-01-01

    Numerical methods based on unstructured grids, with irregular cells, usually require discrete shape functions to approximate the distribution of quantities across cells. For control-volume mixed finite-element methods, vector shape functions are used to approximate the distribution of velocities across cells and vector test functions are used to minimize the error associated with the numerical approximation scheme. For a logically cubic mesh, the lowest-order shape functions are chosen in a natural way to conserve intercell fluxes that vary linearly in logical space. Vector test functions, while somewhat restricted by the mapping into the logical reference cube, admit a wider class of possibilities. Ideally, an error minimization procedure to select the test function from an acceptable class of candidates would be the best procedure. Lacking such a procedure, we first investigate the effect of possible test functions on the pressure distribution over the control volume; specifically, we look for test functions that allow for the elimination of intermediate pressures on cell faces. From these results, we select three forms for the test function for use in a control-volume mixed method code and subject them to an error analysis for different forms of grid irregularity; errors are reported in terms of the discrete L2 norm of the velocity error. Of these three forms, one appears to produce optimal results for most forms of grid irregularity.

  2. L\\"uscher's finite volume test for two-baryon systems with attractive interactions

    CERN Document Server

    Aoki, Sinya; Iritani, Takumi

    2016-01-01

    For the attractive interaction, the L\\"uscher's finite volume formula gives the phase shift at negative squared moment $k^2<0$ for the ground state in the finite volume, which corresponds to the analytic continuation of the phase shift at $k^2<0$ in the infinite volume. Using this fact, we reexamine behaviors of phase shifts at $k^2 <0$ obtained directly from plateaux of effective energy shifts in previous lattice studies for two nucleon systems on various volumes. We have found that data, based on which existences of the bound states are claimed, show singular behaviors of the phase shift at $k^2<0$, which seem incompatible with smooth behaviors predicted by the effective range expansion. This, together with the fake plateau problem for the determination of the energy shift, brings a serious doubt on existences of the $NN$ bound states claimed in previous lattice studies at pion masses heavier than 300 MeV.

  3. Prototypical Rod Consolidation Demonstration Project. Phase 3, Final report: Volume 1, Cold checkout test report, Book 4

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 4 discusses the following topics: Rod Compaction/Loading System Test Results and Analysis Report; Waste Collection System Test Results and Analysis Report; Waste Container Transfer Fixture Test Results and Analysis Report; Staging and Cutting Table Test Results and Analysis Report; and Upper Cutting System Test Results and Analysis Report.

  4. Total Automation for the Core Laboratory: Improving the Turnaround Time Helps to Reduce the Volume of Ordered STAT Tests.

    Science.gov (United States)

    Ialongo, Cristiano; Porzio, Ottavia; Giambini, Ilio; Bernardini, Sergio

    2016-06-01

    The transition to total automation represents the greatest leap for a clinical laboratory, characterized by a totally new philosophy of process management. We have investigated the impact of total automation on core laboratory efficiency and its effects on the clinical services related to STAT tests. For this purpose, a 47-month retrospective study based on the analysis of 44,212 records of STAT cardiac troponin I (CTNI) tests was performed. The core laboratory reached a new efficiency level 3 months after the implementation of total automation. Median turnaround time (TAT) was reduced by 14.9±1.5 min for the emergency department (p < 0.01), reaching 41.6±1.2 min. In non-emergency departments, median TAT was reduced by 19.8±2.2 min (p < 0.01), reaching 52±1.3 min. There was no change in the volume of ordered STAT CTNI tests by the emergency department (p = 0.811), whereas for non-emergency departments there was a reduction of 115.7±50 monthly requests on average (p = 0.026). The volume of ordered tests decreased only in time frames of the regular shift following the morning round. Thus, total automation significantly improves the core laboratory efficiency in terms of TAT. As a consequence, the volume of STAT tests ordered by hospital departments (except for the emergency department) decreased due to reduced duplicated requests.

  5. Student Assessment System. Domain Referenced Tests. Allied Health Occupations/Practical Nursing. Volume II: Theory.

    Science.gov (United States)

    Campbell, Gene, Comp.; Simpson, Bruce, Comp.

    These written domain referenced tests (DRTs) for the area of allied health occupations/practical nursing test cognitive abilities or knowledge of theory. Introductory materials describe domain referenced testing and test development. Each multiple choice test includes a domain statement, describing the behavior and content of the domain, and a…

  6. 40 CFR 799.5085 - Chemical testing requirements for certain high production volume chemicals.

    Science.gov (United States)

    2010-07-01

    ... (preferred species), rat, or Chinese hamster): 40 CFR 799.9538 OR Mammalian Erythrocyte Micronucleus Test (in... CHEMICAL SUBSTANCE AND MIXTURE TESTING REQUIREMENTS Multichemical Test Rules § 799.5085 Chemical testing... paragraph (j) of this section at any time from April 17, 2006 to the end of the test data...

  7. Free Volume Structure of Acrylic-Type Dental Nanocomposites Tested with Annihilating Positrons

    Science.gov (United States)

    Shpotyuk, Olha; Ingram, Adam; Shpotyuk, Oleh

    2016-11-01

    Positron annihilation spectroscopy in lifetime measuring mode exploring conventional fast-fast coincidence ORTEC system is employed to characterize free volume structure of commercially available acrylic-type dental restorative composite Charisma® (Heraeus Kulzer GmbH, Germany). The measured lifetime spectra for uncured and light-cured composites are reconstructed from unconstrained x3-term fitting and semi-empirical model exploring x3-x2-coupling decomposition algorithm. The governing channel of positron annihilation in the composites studied is ascribed to mixed positron-Ps trapping, where Ps decaying in the third component is caused entirely by input from free-volume holes in polymer matrix, while the second component is defined by free positron trapping in interfacial free-volume holes between filler nanoparticles and surrounded polymer matrix. Microstructure scenario of the photopolymerization shrinkage includes cross-linking of structural chains in polymer matrix followed by conversion of bound positron-electron (positronium) traps in positron-trapping interfacial free-volume voids in a vicinity of agglomerated filler nanoparticles.

  8. Monitoring of air radioactivity at the Jungfraujoch research station: Test of a new high volume aerosol sampler

    OpenAIRE

    Flury, Thomas; Völkle, Hansruedi

    2008-01-01

    The Swiss Federal Office of Public Health (SFOPH) is responsible for the surveillance of environmental radioactivity in Switzerland and for the protection of the public from ionizing and non-ionizing radiation. In order to improve the Swiss radioactivity monitoring network, a new high volume air sampler (DIGITEL DHA-80) was tested in Fribourg and at the Jungfraujoch High Altitude Research Station at 3454 m. The filters are analyzed in the laboratory by a high purity coaxial germanium detector...

  9. Job Performance Tests for CH-53A/D Helicopter Mechanics. Volume 2. Administrative Duties and Job Knowledge Tests. Revision.

    Science.gov (United States)

    Hands-on performance tests and job knowledge tests were developed for MOS 6113 (CH-53A/D helicopter mechanic) as part of the Marine Corps Job ... Performance Measurement Project. The purpose of this information memorandum is to disseminate these performance measures to Marine Corps personnel managers

  10. Job Performance Tests for CH-53E Helicopter Mechanics. Volume 2: Administrative Duties and Job Knowledge Tests

    Science.gov (United States)

    1992-01-01

    Hands-on performance tests and job knowledge tests were developed for MOS 6115 (CH-53E helicopter mechanic) as part of the marine Corps Job ... Performance Measurement Project. The purpose of this information memorandum is to disseminate these performance measures to Marine Corps personnel managers

  11. Fatigue testing of plasma-sprayed thermal barrier coatings, volume 2

    Science.gov (United States)

    Cruse, T. A.; Nagy, A.; Popelar, C. F.

    1990-01-01

    A plasma sprayed thermal barrier coating for diesel engines were fatigue tested. Candidate thermal barrier coating materials were fatigue screened and a data base was generated for the selected candidate material. Specimen configurations are given for the bend fatigue tests, along with test setup, specimen preparation, test matrix and procedure, and data analysis.

  12. Fatigue testing of plasma-sprayed thermal barrier coatings, Volume 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cruse, T.A.; Nagy, A.; Popelar, C.F.

    1990-07-01

    A plasma sprayed thermal barrier coating for diesel engines were fatigue tested. Candidate thermal barrier coating materials were fatigue screened and a data base was generated for the selected candidate material. Specimen configurations are given for the bend fatigue tests, along with test setup, specimen preparation, test matrix and procedure, and data analysis.

  13. Crown Zellerbach Well No. 2, Livingston Parish, Louisiana. Volume II. Well test data. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The following well test data are included: final report of field test data, IGT compiled data, ERMI raw data, Gas Producer's Associated tentative method of testing for hydrogen sulfide in natural gas using length of stain tubes, IGT combined sample log, report on reservoir fluids, well test analysis, sampling and chemical analysis procedures, and scale and corrosion evaluation. (MHR)

  14. Test design description Volume 2, Part 1. IFR-1 metal fuel irradiation test (AK-181) element as-built data

    Energy Technology Data Exchange (ETDEWEB)

    Dodds, N. E.

    1986-06-01

    The IFR-1 Test, designated as the AK-181 Test Assembly, will be the first irradiation test of wire wrapped, sodium-bonded metallic fuel elements in the Fast Flux Test Facility (FFTF). The test is part of the Integral Fast Reactor (IFR) fuels program conducted by Argonne National Laboratory (ANL) in support of the Innovative Reactor Concepts Program sponsored by the US Department of Energy (DOE). One subassembly, containing 169 fuel elements, will be irradiated for 600 full power days to achieve 10 at.% burnup. Three metal fuel alloys (U-10Zr, U-8Pu-10Zr) will be irradiated in D9 cladding tubes. The metal fuel elements have a fuel-smeared density of 75% and each contains five slugs. The enriched zone contains three slugs and is 36-in. long. One 6.5-in. long depleted uranium axial blanket slug (DU-10Zr) was loaded at each end of the enriched zone. the fuel elements were fabricated at ANL-W and delivered to Westinghouse-Hanford for wirewrapping and assembly into the test article. This Test Design Description contains relevant data on compositions, densities, dimensions and weights for the cast fuel slugs and completed fuel elements. The elements conform to the requirements in MG-22, "Users` Guide for the Irradiation of Experiments in the FTR."

  15. Isotope Brayton ground demonstration testing and flight qualification. Volume 1. Technical program

    Energy Technology Data Exchange (ETDEWEB)

    1974-12-09

    A program is proposed for the ground demonstration, development, and flight qualification of a radioisotope nuclear heated dynamic power system for use on space missions beginning in the 1980's. This type of electrical power system is based upon and combines two aerospace technologies currently under intense development; namely, the MHW isotope heat source and the closed Brayton cycle gas turbine. This power system represents the next generation of reliable, efficient economic electrical power equipment for space, and will be capable of providing 0.5 to 2.0 kW of electric power to a wide variety of spacecraft for earth orbital and interplanetary missions. The immediate design will be based upon the requirements for the Air Force SURVSATCOM mission. The proposal is presented in three volumes plus an Executive Summary. This volume describes the tasks in the technical program.

  16. RSRM top hat cover simulator lightning test, volume 2. Appendix A: Resistance measurements. Appendix B: Lightning test data plots

    Science.gov (United States)

    1990-01-01

    Resistance measurements are given in graphical for when a simulated lightning discharge strikes on an exposed top hat cover simulator. The test sequence was to measure the electric and magnetic fields induced inside a redesigned solid rocket motor case.

  17. Learner-Centered Instruction (LCI). Volume 5. Description of the Job Performance Test.

    Science.gov (United States)

    Pieper, William J.; And Others

    An account is presented of the development of a job performance test for the Learner Centered Instruction (LCI) weapon control systems mechanic/technician Air Force course. The performance test was administered to the LCI experimental course subjects as well as the control course subjects upon graduation. Test items are, for the most part, based…

  18. A Combined Hazard Index Fire Test Methodology for Aircraft Cabin Materials. Volume I.

    Science.gov (United States)

    1982-04-01

    successful data processing and evaluation . R. J. Sutton, Principal Technical specialist - Advanced Programs, and E. L. Weiner, Engineering Contract... Evaluation ................................................... 49 IV. DISCUSSION OF REJLTS ............................................. 51 CHAS/S’TS Test...PROGRAM TEST PANEL NO. 1 ....... 52 5 SUMARY OF EXPERIMTAL CHAS/SATS DATA FOR CI PRGRAM TEST PANEL 2, 3 & 4

  19. LEARNER-CENTERED INSTRUCTION (LCI): VOLUME V - DESCRIPTION OF THE JOB PERFORMANCE TEST.

    Science.gov (United States)

    graduation. The test items are, for the most part, based on tasks derived from the behavioral description of the actual job. The test contains...three major parts: Operational checkout, Troubleshooting, and auxiliary task performance. Most of the test items are performed on the Simulated

  20. Analysis and test for space shuttle propellant dynamics (1/10th scale model test results). Volume 1: Technical discussion

    Science.gov (United States)

    Berry, R. L.; Tegart, J. R.; Demchak, L. J.

    1979-01-01

    Space shuttle propellant dynamics during ET/Orbiter separation in the RTLS (return to launch site) mission abort sequence were investigated in a test program conducted in the NASA KC-135 "Zero G" aircraft using a 1/10th-scale model of the ET LOX Tank. Low-g parabolas were flown from which thirty tests were selected for evaluation. Data on the nature of low-g propellant reorientation in the ET LOX tank, and measurements of the forces exerted on the tank by the moving propellent will provide a basis for correlation with an analytical model of the slosh phenomenon.

  1. Kaman 40-kW wind system. Phase II. Fabrication and tests. Volume II. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Howes, H; Perley, R

    1981-01-01

    A program is underway to design, fabricate and test a horizontal axis Wind Turbine Generator (WTG) capable of producing 40 kW electrical output power in a 20 mph wind. Results are presented of the program effort covering fabrication and testing of the Wing Turbine Generator designed earlier. A minimum of difficulties were experienced during fabrication and, after successful completion of Contractor tests through 20 mph winds, the WTG was shipped to Rocky Flats, assembled and operated there. The 40 kW WTG is presently undergoing extended tests at Rockwell's Rocky Flats test facility.

  2. Ocean Thermal Energy Conversion (OTEC) test facilities study program. Final report. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-17

    A comprehensive test program has been envisioned by ERDA to accomplish the OTEC program objectives of developing an industrial and technological base that will lead to the commercial capability to successfully construct and economically operate OTEC plants. This study was performed to develop alternative non-site specific OTEC test facilities/platform requirements for an integrated OTEC test program including both land and floating test facilities. A progression of tests was established in which OTEC power cycle component designs proceed through advanced research and technology, component, and systems test phases. This progression leads to the first OTEC pilot plant and provides support for following developments which potentially reduce the cost of OTEC energy. It also includes provisions for feedback of results from all test phases to enhance modifications to existing designs or development of new concepts. The tests described should be considered as representative of generic types since specifics can be expected to change as the OTEC plant design evolves. Emphasis is placed on defining the test facility which is capable of supporting the spectrum of tests envisioned. All test support facilities and equipment have been identified and included in terms of space, utilities, cost, schedule, and constraints or risks. A highly integrated data acquisition and control system has been included to improve test operations and facility effectiveness through a centralized computer system capable of automatic test control, real-time data analysis, engineering analyses, and selected facility control including safety alarms. Electrical power, hydrogen, and ammonia are shown to be technically feasible as means for transmitting OTEC power to a land-based distribution point. (WHK)

  3. Prairie Canal Well No. 1, Calcasieu Parish, Louisiana. Volume II. Well test data. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The following are included in appendices: field test data, field non-edited data, raw data, tentative method of testing for hydrogen sulfide in natural gas using length of stain tubes, combined sample log, report on reservoir fluids study, well test analysis, analysis of solids samples from primary zone, chemical analysis procedures, scale and corrosion evaluation, laboratory report on scale deposits, and sand detector strip charts. (MHR)

  4. Review of waste package verification tests. Semiannual report, April 1984-September 1984. Volume 5

    Energy Technology Data Exchange (ETDEWEB)

    Jain, H.; Veakis, E.; Soo, P.

    1985-06-01

    This ongoing study is part of a task to specify tests that may be used to verify that engineered waste package/repository systems comply with NRC radionuclide containment and controlled release performance objectives. Work covered in this report includes crushed tuff packing material for use in a high level waste tuff repository. A review of available tests to quantify packing performance is given together with recommendations for future testing work. 27 refs., 6 figs., 3 tabs.

  5. Test Methods for Telemetry Systems and Subsystems. Volume 2: Test Methods for Telemetry Radio Frequency (RF) Subsystems

    Science.gov (United States)

    2012-09-01

    interference test is to measure the effect on bit error probability ( BEP ) of signals in adjacent frequency slots. The results will be a function of...is to have the two interfering signals 20 dB larger than the victim signal. Vary the attenuator that is common to the two interferers until the BEP ...measurement of bit error probability ( BEP ) improvement (or degradation) when signals are combined as compared with single channel operation. The BEP is

  6. Relationship of temporal lobe volumes to neuropsychological test performance in healthy children

    NARCIS (Netherlands)

    Wells, Carolyn T.; Mahone, E. Mark; Matson, Melissa A.; Kates, Wendy R.; Hay, Trisha; Horska, Alena

    2008-01-01

    Ecological validity of neuropsychological assessment includes the ability of tests to predict real-world functioning and/or covary with brain structures. Studies have examined the relationship between adaptive skills and test performance, with less focus on the association between regional brain vol

  7. Direct Numerical Simulation of Reionization in Large Cosmological Volumes I: Numerical Methods and Tests

    CERN Document Server

    Norman, Michael L; So, Geoffrey C; Harkness, Robsert P

    2013-01-01

    We describe an extension of the {\\em Enzo} code to enable the direct numerical simulation of inhomogeneous reionization in large cosmological volumes. By direct we mean all dynamical, radiative, and chemical properties are solved self-consistently on the same mesh, as opposed to a postprocessing approach which coarse-grains the radiative transfer. We do, however, employ a simple subgrid model for star formation, which we calibrate to observations. The numerical method presented is a modification of an earlier method presented in Reynolds et al. Radiation transport is done in the grey flux-limited diffusion (FLD) approximation, which is solved by implicit time integration split off from the gas energy and ionization equations, which are solved separately. This results in a faster and more robust scheme for cosmological applications compared to the earlier method. The FLD equation is solved using the {\\em hypre} optimally scalable geometric multigrid solver from LLNL. By treating the ionizing radiation as a gri...

  8. Testing of high-volume sampler inlets for the sampling of atmospheric radionuclides.

    Science.gov (United States)

    Irshad, Hammad; Su, Wei-Chung; Cheng, Yung S; Medici, Fausto

    2006-09-01

    Sampling of air for radioactive particles is one of the most important techniques used to determine the nuclear debris from a nuclear weapon test in the Earth's atmosphere or those particles vented from underground or underwater tests. Massive-flow air samplers are used to sample air for any indication of radionuclides that are a signature of nuclear tests. The International Monitoring System of the Comprehensive Nuclear Test Ban Treaty Organization includes seismic, hydroacoustic, infrasound, and gaseous xenon isotopes sampling technologies, in addition to radionuclide sampling, to monitor for any violation of the treaty. Lovelace Respiratory Research Institute has developed a large wind tunnel to test the outdoor radionuclide samplers for the International Monitoring System. The inlets for these samplers are tested for their collection efficiencies for different particle sizes at various wind speeds. This paper describes the results from the testing of two radionuclide sampling units used in the International Monitoring System. The possible areas of depositional wall losses are identified and the losses in these areas are determined. Sampling inlet type 1 was tested at 2.2 m s wind speed for 5, 10, and 20-microm aerodynamic diameter particles. The global collection efficiency was about 87.6% for 10-microm particles for sampling inlet type 1. Sampling inlet type 2 was tested for three wind speeds at 0.56, 2.2, and 6.6 m s for 5, 10, and 20-microm aerodynamic diameter particles in two different configurations (sampling head lowered and raised). The global collection efficiencies for these configurations for 10-microm particles at 2.2 m s wind speed were 77.4% and 82.5%, respectively. The sampling flow rate was 600 m h for both sampling inlets.

  9. Demonstration, testing, & evaluation of in situ heating of soil. Draft final report, Volume II: Appendices A to E

    Energy Technology Data Exchange (ETDEWEB)

    Dev, H.; Enk, J.; Jones, D.; Saboto, W.

    1996-02-12

    This document is a draft final report for US DOE contract entitled, {open_quotes}Demonstration Testing and Evaluation of In Situ Soil Heating,{close_quotes} Contract No. DE-AC05-93OR22160, IITRI Project No. C06787. This report is presented in two volumes. Volume I contains the technical report This document is Volume II, containing appendices with background information and data. In this project approximately 300 cu. yd. of clayey soil containing a low concentration plume of volatile organic chemicals was heated in situ by the application of electrical energy. It was shown that as a result of heating the effective permeability of soil to air flow was increased such that in situ soil vapor extraction could be performed. The initial permeability of soil was so low that the soil gas flow rate was immeasurably small even at high vacuum levels. When scaled up, this process can be used for the environmental clean up and restoration of DOE sites contaminated with VOCs and other organic chemicals boiling up to 120{degrees}to 130{degrees}C in the vadose zone. Although it may applied to many types of soil formations, it is particularly attractive for low permeability clayey soil where conventional in situ venting techniques are limited by low air flow.

  10. TMI-2 core debris-cesium release/settling test. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    Akers, D W; Johnson, D A

    1984-12-01

    Cesium release, turbidity and airborne potential tests were conducted on 50 grams of TMI-2 core debris materials. The tests were performed on the debris in two conditions: on the as-received core debris specimen, and after crushing the debris to alter the particle size distribution. The crushing was intended to simulate the breakup of TMI-2 core material that may occur during reactor defueling. These tests are intended to assist GPU Nuclear in predicting the effect of defueling on the reactor environment.

  11. Stack test results at Phelps-Dodge Corporation, Ajo, Arizona. Volume III. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Steiner, J.

    1977-03-01

    Contents: Sampling schedules for simultaneous stack tests; Weight versus time curve for glass fiber filter; Sample calculation for statistical analysis; Individual process weight calculations; Individual filter, particulate and residue weight data.

  12. Stack test results at Phelps-Dodge Corporation, Ajo, Arizona. Volume I. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Steiner, J.

    1977-03-01

    In July 1976 at the request of EPA, Region IX, Enforcement Division, the Aerotherm Division of the Acurex Corporation conducted a series of air pollutant mass emissions tests at the new Cornelia Branch copper smelter of the Phelps Dodge Corporation located in Ajo, Arizona. The tests were performed simultaneously at three locations: (1) the main stack, (2) the reverberatory furnace duct and (3) the converter side sulfuric acid plant tail gas duct. Tests for particulate matter (Method 5), sulfur dioxide and sulfuric acid (Method 8) were conducted at each location using a combined sampling train. In addition tests for 'condensable particulate matter' were conducted at the main stack and the reverberatory furnace duct using the combined Method 5 and 8 sampling train with an instack filter added.

  13. Geothermal fracture stimulation technology. Volume II. High-temperature proppant testing

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-01

    Data were obtained from a newly built proppant tester, operated at actual geothermal temperatures. The short term test results show that most proppants are temperature sensitive, particularly at the higher closure stresses. Many materials have been tested using a standard short-term test, i.e., fracture-free sand, bauxite, and a resin-coated sand retained good permeability at the high fluid temperatures in brine over a range of closure stresses. The tests were designed to simulate normal closure stress ranges for geothermal wells which are estimated to be from 2000 to 6000 psi. Although the ultra high closure stresses in oil and gas wells need not be considered with present geothermal resources, there is a definite need for chemically inert proppants that will retain high permeability for long time periods in the high temperature formations.

  14. Processing equipment for resource recovery systems. Volume 3: Field test evaluation of shredders

    Science.gov (United States)

    Savage, G. M.; Shiflett, G. R.

    1980-07-01

    A program to test and evaluate large scale shredders used for the size reduction of solid waste is reported. Tests were conducted on seven horizontal hammermills, one vertical hammermill, and one vertical ring shredder at six commercial sites. Both two stage size reduction and single stage size reduction were studied. Analytical relationships among the comminution parameters and the establishment of levels of performance for energy consumption and hammer wear associated with size reduction of solid waste are developed.

  15. Volume Sensor Development Test Series 4 Results - Multi-Component Prototype Evaluation

    Science.gov (United States)

    2006-01-25

    multiple locations in the test space by two aerosols, The aerosols used were: 1) Old Spice High Endurance deodorant 2) Lysol disinfectant spray. 9...Deodorant / Lysol and Old spice Deodorant (High Endurance) were sprayed Aerosol 5 seconds, off for 5 seconds, then sprayed for 5 seconds at spray... Lysol sprayed at location 4 -325 seconds after DAQ start old spice sprayed at location 1 -360 seconds after DAQ start Lysol sprayed at location 1 and test

  16. 3000-HP Roller Gear Transmission Development Program. Volume 5. Aircraft Tiedown Testing

    Science.gov (United States)

    1975-07-01

    54 8 5-Hour Break-in Spectrum . a . . . . . . 74 9 Endurance Test, 10-Hour Cycle . . . . . . 76 10 5-Hour Brak -in Test Power Levels . . . . 81...Roller Srface, First-Row Pinion As a result of insufficient blending of the first-row pinion roller radius serial number 69, the sun gear exhibited a...first- row pinion rollers. This was attributable to insuffi- cient blending of the roller crown on the mating second-row gear roller. 2. The spherical

  17. Crown Zellerbach Well No. 2, Livingston Parish, Louisiana. Volume I. Completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The Crown Zellerbach Well No. 2, approximately 23 miles east of Baton Rouge, Louisiana, is the eighth successful test of a geopressured-geothermal aquifer under the DOE Wells of Opportunity program. The well was tested through the annulus between 7-inch casing and 2-3/8 inch tubing. Two flow tests and one reservoir pressure buildup test were conducted on the lower zone during a 13-day period. A total of 12,489 barrels of water was produced. The highest flow rate achieved was about 3887 BWPD. One flow test followed by a buildup period was conducted on the combined upper and lower zones during a 3-day period. A total of 4739 barrels of water was produced. The highest flow rate achieved was about 3000 BWPD. The gas/water ratio measured during testing was about 32.0 SCF/BBL for the lower zone. The extrapolated latoratory data indicates that the solubility of the gas is 55.7 SCF/BBL. It appears that the reservoir brine is considerably undersaturated. The methane content of the flare line gas averaged 71.0 mole percent. Crown Zellerbach Company carefully studied the commercial feasibility of using the well to produce energy for a wood-drying facility and decided against the project.

  18. Subsonic Ultra Green Aircraft Research: Phase II- Volume III-Truss Braced Wing Aeroelastic Test Report

    Science.gov (United States)

    Bradley, Marty K.; Allen, Timothy J.; Droney, Christopher

    2014-01-01

    This Test Report summarizes the Truss Braced Wing (TBW) Aeroelastic Test (Task 3.1) work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team, which includes the time period of February 2012 through June 2014. The team consisted of Boeing Research and Technology, Boeing Commercial Airplanes, Virginia Tech, and NextGen Aeronautics. The model was fabricated by NextGen Aeronautics and designed to meet dynamically scaled requirements from the sized full scale TBW FEM. The test of the dynamically scaled SUGAR TBW half model was broken up into open loop testing in December 2013 and closed loop testing from January 2014 to April 2014. Results showed the flutter mechanism to primarily be a coalescence of 2nd bending mode and 1st torsion mode around 10 Hz, as predicted by analysis. Results also showed significant change in flutter speed as angle of attack was varied. This nonlinear behavior can be explained by including preload and large displacement changes to the structural stiffness and mass matrices in the flutter analysis. Control laws derived from both test system ID and FEM19 state space models were successful in suppressing flutter. The control laws were robust and suppressed flutter for a variety of Mach, dynamic pressures, and angle of attacks investigated.

  19. Associations of hypoosmotic swelling test, relative sperm volume shift, aquaporin7 mRNA abundance and bull fertility estimates.

    Science.gov (United States)

    Kasimanickam, R K; Kasimanickam, V R; Arangasamy, A; Kastelic, J P

    2017-02-01

    Mammalian sperm are exposed to a natural hypoosmotic environment during male-to-female reproductive tract transition; although this activates sperm motility in vivo, excessive swelling can harm sperm structure and function. Aquaporins (AQPs) is a family of membrane-channel proteins implicated in sperm osmoregulation. The objective was to determine associations among relative sperm volume shift, hypoosmotic swelling test (HOST), sperm aquaporin (AQP) 7 mRNA abundances, and sire conception rate (SCR; fertility estimate) in Holstein bulls at a commercial artificial insemination center. Three or four sires for each full point SCR score from -4 to +4 were included. Each SCR estimate for study bulls (N = 30) was based on > 500 services (mean ± SEM) of 725 ± 13 services/sire). Sperm from a single collection day (two ejaculates) from these commercial Holstein bulls were used. Relative mRNA expression of AQP7 in sperm was determined by polymerase chain reaction. Mean relative sperm volume shift and percentage of sperm reacted in a HOST (% HOST) were determined (400 sperm per bull) after incubating in isoosmotic (300 mOsm/kg) and hypoosmotic (100 mOsm/kg) solutions for 30 min. There was no correlation between %HOST and SCR (r = 0.28 P > 0.1). However, there was a positive correlation between relative sperm volume shift and SCR (r = 0.65, P 2) fertility sire groups. In conclusion, bulls with higher SCR had significantly greater AQP7 mRNA abundance in frozen-thawed sperm. This plausibly contributed to greater regulation of sperm volume shift, which apparently conferred protection from detrimental swelling and impaired functions. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Nevada Test Site Environmental Report 2006 and Site Description (Volume 1)

    Energy Technology Data Exchange (ETDEWEB)

    Cathy Wills

    2007-10-01

    The Nevada Test Site Environmental Report 2006 (NTSER) was prepared to meet the information needs of the public and the requirements and guidelines of the U.S. Department of Energy (DOE) for annual site environmental reports. It was prepared by National Security Technologies, LLC (NSTec). This Executive Summary presents the purpose of the document, the major programs conducted at the Nevada Test Site (NTS), NTS key environmental initiatives, radiological releases and potential doses to the public resulting from site operations, a summary of nonradiological releases, implementation status of the NTS Environmental Management System, a summary of compliance with environmental regulations, pollution prevention and waste minimization accomplishments, and significant environmental accomplishments. Much of the content of this Executive Summary is also presented in a separate stand-alone pamphlet titled Nevada Test Site Environmental Report Summary 2006 produced to be a more cost-effective means of distributing information contained in the NTSER to interested DOE stakeholders.

  1. The Infrared Imaging Spectrograph (IRIS) for TMT: Volume phase holographic grating performance testing and discussion

    CERN Document Server

    Chen, Shaojie; Wright, Shelley A; Moore, Anna M; Larkin, James E; Maire, Jerome; Mieda, Etsuko; Simard, Luc

    2014-01-01

    Maximizing the grating efficiency is a key goal for the first light instrument IRIS (Infrared Imaging Spectrograph) currently being designed to sample the diffraction limit of the TMT (Thirty Meter Telescope). Volume Phase Holographic (VPH) gratings have been shown to offer extremely high efficiencies that approach 100% for high line frequencies (i.e., 600 to 6000l/mm), which has been applicable for astronomical optical spectrographs. However, VPH gratings have been less exploited in the near-infrared, particularly for gratings that have lower line frequencies. Given their potential to offer high throughputs and low scattered light, VPH gratings are being explored for IRIS as a potential dispersing element in the spectrograph. Our team has procured near-infrared gratings from two separate vendors. We have two gratings with the specifications needed for IRIS current design: 1.51-1.82{\\mu}m (H-band) to produce a spectral resolution of 4000 and 1.19- 1.37 {\\mu}m (J-band) to produce a spectral resolution of 8000....

  2. Prairie Canal Well No. 1, Calcasieu Parish, Louisiana. Volume 1. Completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The Prairie Canal Company, Inc. Well No. 1, approximately 8 miles south of the city of Lake Charles, Louisiana, was tested through the annulus between 5-1/2 inch casing and 2-3/8 inch tubing. The interval tested was from 14,782 to 14,820 feet. The geological section was the Hackberry Sand, a member of the Oligocene Frio formation. Produced water was injected into a disposal well which was perforated in several Miocene Sands from 3070 to 4600 feet. Original plans were to test a section of the Hackberry sand from 14,976 to 15,024 feet. This primary zone, however, produced a large amount of sand, shale, gravel, and rocks during early flow periods and was abandoned in favor of the secondary zone. Four pressure drawdown flow tests and three pressure buildup tests were conducted during a 12-day period. A total of 36,505 barrels of water was produced. The highest sustained flow rate was approximately 7100 BWPD. The gas-to-water ratio, measured during testing, ranged from 41 to 50 SCF/BBL. There is disagreement as to the saturation value of the reservoir brine, which may be between 43.3 and 49.7 SCF/BBL. The methane content of the flare line gas averaged 88.4 mole percent. The CO/sub 2/ content averaged 8.4 mole percent. Measured values of H/sub 2/S in the gas were between 12 and 24 ppM.

  3. Modular, High-Volume Fuel Cell Leak-Test Suite and Process

    Energy Technology Data Exchange (ETDEWEB)

    Ru Chen; Ian Kaye

    2012-03-12

    Fuel cell stacks are typically hand-assembled and tested. As a result the manufacturing process is labor-intensive and time-consuming. The fluid leakage in fuel cell stacks may reduce fuel cell performance, damage fuel cell stack, or even cause fire and become a safety hazard. Leak check is a critical step in the fuel cell stack manufacturing. The fuel cell industry is in need of fuel cell leak-test processes and equipment that is automatic, robust, and high throughput. The equipment should reduce fuel cell manufacturing cost.

  4. Orbital Transfer Vehicle Oxygen Turbopump Technology. Final Report, Volume 1. Design, Fabrication, and Hydrostatic Bearing Testing

    Science.gov (United States)

    1990-12-01

    cc c 58 uju CD C:> ɘ CDC L.) C) 0 crc> 01 2Li L-1 c-.l0 I CD C.- 2.5,Detail Design, cont. assembly error . The most sensitive area for contact is the...exit ports sealed. All transducers sensed within their typi- cal error tolerance at the low pressures being used in the initial tests. Chilldown tests...exterior temp. at turbine TIPO OF (0.25,0) bearing IPmp bearing exit tenperature TPBEC OF PBEI Pmp bearing exit temperature TPBEC OF PBE2 SPump bearing

  5. Design, construction and performance tests of a prototype micromegas chamber with two readout planes in a common gas volume

    Science.gov (United States)

    Brickwedde, Bernard; Düdder, Andreas; Schott, Matthias; Yildirim, Eda

    2017-08-01

    In this paper, the design and the performance of a prototype detector based on MicroMegas technology with two detection planes in a common gas volume is discussed. The detector is suited for the forward region of LHC detectors, addressing the high-rate environment and limited available space. Each detection plane has an active area of 9 × 9cm2 with a two-dimensional strip readout and is separated by a common gas region with a height of 14 mm . A micro-mesh, working as a cathode, is placed in the middle of the common gas volume separating it into two individual cells. This setup allows for an angle reconstruction of incoming particles with a precision of ∼ 2 mrad. Since this design reduces the impact of multiple scattering effects by the reduced material budget, possible applications for low energy beam experiments can be envisioned. The performance of the prototype detector has been tested with a 4 . 4 GeV electron beam, provided by the test beam facility at DESY.

  6. Interim-Night Integrated Goggle Head Tracking System (I-Nights). Volume 1. Ground Test Summary

    Science.gov (United States)

    1992-08-01

    Albery, J. Whitestone, The Standard Automated Mass Properties Testing Procedure, 1988, AAMRL-TR-88-XX (unpublished). 2. A. Lephart, C. Albery, A. Obert ...Systematic Variation of Headgear Weights and Centre -of- Gravity", Aviation. Sgace. and Environmental Medicine, pp 901- 905, October 1983. 13. Privitzer, E

  7. Giromill wind tunnel test and analysis. Volume II. Technical discussion. Final report, June 1976--October 1977

    Energy Technology Data Exchange (ETDEWEB)

    Moran, W.A.

    1977-10-01

    A wind tunnel test of a Giromill rotor was conducted. The objective of this test was to substantiate the performance computed by the Larsen cyclogiro vortex theory. Additional objectives were to obtain performance comparison data between the Giromill, a sinusoidal blade modulation Giromill, a Darrieus rotor, and a modified Darrieus rotor that flips the blades a few degrees. A three bladed Giromill rotor having a diameter of 2.13 m (7 ft) and a span of 1.52 m (5 ft) was tested in the McDonnell Aircraft Company 15 x 20 ft Mini Speed Wind Tunnel. The blade modulations were accomplished through use of a cam and push rod arrangement. Replaceable cams provided the desired blade modulation at the various operating points. Various operating conditions were achieved by adjusting the rotor RPM and tunnel speed. The results show that the Giromill has good performance, equal to or much better than that predicted by theory, and outperforms the other types of vertical axis wind turbines tested.

  8. Observations from using models to fit the gas production of varying volume test cells and landfills.

    Science.gov (United States)

    Lamborn, Julia

    2012-12-01

    Landfill operators are looking for more accurate models to predict waste degradation and landfill gas production. The simple microbial growth and decay models, whilst being easy to use, have been shown to be inaccurate. Many of the newer and more complex (component) models are highly parameter hungry and many of the required parameters have not been collected or measured at full-scale landfills. This paper compares the results of using different models (LANDGEM, HBM, and two Monod models developed by the author) to fit the gas production of laboratory scale, field test cell and full-scale landfills and discusses some observations that can be made regarding the scalability of gas generation rates. The comparison of these results show that the fast degradation rate that occurs at laboratory scale is not replicated at field-test cell and full-scale landfills. At small scale, all the models predict a slower rate of gas generation than actually occurs. At field test cell and full-scale a number of models predict a faster gas generation than actually occurs. Areas for future work have been identified, which include investigations into the capture efficiency of gas extraction systems and into the parameter sensitivity and identification of the critical parameters for field-test cell and full-scale landfill predication.

  9. Isotope Brayton ground demonstration testing and flight qualification program. Volume 1. Technical program

    Energy Technology Data Exchange (ETDEWEB)

    1974-12-09

    A proposal for the demonstration, development and production of the Isotope Brayton Flight System for space vehicles is presented with details on the technical requirements for designing and testing a ground demonstration system and on the program organization and personnel. (LCL)

  10. Talking and Testing: Discourse Approaches to the Assessment of Oral Proficiency. Studies in Bilingualism, Volume 14.

    Science.gov (United States)

    Young, Richard, Ed.; He, Agnes Weiyun, Ed.

    Papers on second language oral proficiency testing include: "Language Proficiency Interviews: A Discourse Approach" (Agnes Weiyun He, Richard Young); "Re-Analyzing the OPI: How Much Does It Look Like Natural Conversation?" (Marysia Johnson, Andrea Tyler); "Evaluating Learner Interactional Skills: Conversation at the Micro Level" (Heidi…

  11. Human Resources Test and Evaluation System (HRTES). Volume 2. Comprehensive Workbook

    Science.gov (United States)

    1984-08-01

    false targets/target 24 . signatures. 23_______ 22- 21 ___ _ __ __ __ __ __20 . - 19 18- 17 16 15 .1*4 13 _ 010 __ 9._ 7_ UJ6 -- SYSTEM FUNCION DAE...TRAINING MEASURE #4 MEASURE OF THE ADEQUACY OF OPERATIONAL TEST TRAINERS DESCRIPTION: One of the major variables of training which can produce sub-criterion

  12. SRC burn test in 700-hp oil-designed boiler. Volume 1. Integrated report. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    This burn test program was conducted during the period of August 1982 to February 1983 to demonstrate that Solvent Refined Coal (SRC) products can displace petroleum as a boiler fuel in oil- and gas-designed boilers. The test program was performed at the U.S. Department of Energy's Pittsburgh Energy Technology Center (PETC). Three forms of SRC (pulverized SRC, a solution of SRC dissolved in process-derived distillates, and a slurry of SRC and water) and No. 6 Fuel Oil were evaluated in the 700-hp (30 x 10/sup 6/ Btu/hour) watertube, oil-designed boiler facility at PETC. The test program was managed by the International Coal Refining Company (ICRC) and sponsored by the Department of Energy. Other organizations were involved as necessary to provide the expertise required to execute the test program. This final report represents an integrated overview of the test program conducted at PETC. More detailed information with preliminary data can be obtained from separate reports prepared by PETC, Southern Research Institute, Wheelabrator-Frye, Babcock and Wilcox, and Combustion Engineering. These are presented as Annex Volumes A-F. 25 references, 41 figures, 15 tables.

  13. Multiple IMU system test plan, volume 4. [subroutines for space shuttle requirements

    Science.gov (United States)

    Landey, M.; Vincent, K. T., Jr.; Whittredge, R. S.

    1974-01-01

    Operating procedures for this redundant system are described. A test plan is developed with two objectives. First, performance of the hardware and software delivered is demonstrated. Second, applicability of multiple IMU systems to the space shuttle mission is shown through detailed experiments with FDI algorithms and other multiple IMU software: gyrocompassing, calibration, and navigation. Gimbal flip is examined in light of its possible detrimental effects on FDI and navigation. For Vol. 3, see N74-10296.

  14. The Study of Productivity Measurement and Incentive Methodology (Phase III - Paper Test). Volume 1

    Science.gov (United States)

    1986-03-14

    goal is to prepare an implementation report/ manual that guides others in execution of recommendations and alternative approaches identified in...be machine, assembly and/or test labor, a contractor can submit an IMIP to automate a manual process for simple, average and/or complex machine shop...structure has created the need to address both produccion and non-productxon costs. VAPO has, therefore, expanded the application of measurements

  15. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Empirical Testing. Volume 2

    Science.gov (United States)

    Johnson, Kenneth L.; White, K. Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. In this paper, the results of empirical tests intended to assess the accuracy of acceptance sampling plan calculators implemented for six variable distributions are presented.

  16. Systematic two-dimensional cascade tests. Volume 3: Slotted double circular-arc hydrofoils

    Science.gov (United States)

    Columbo, R. M.; Murrin, T. A.

    1972-01-01

    Performance parameters are presented for cascades of slotted double circular-arc hydrofoils tested over a range of systematically introduced variables in a rectilinear cascade tunnel which uses water as the test medium. Cascade configurations included various combinations of an inlet flow angle of 50, 60 and 70 deg; a cascade solidity of 0.75, 1.00 and 1.50; a hydrofoil camber angle of 20, 30, 40 and 45 deg; and angles of incidence between positive and negative stall. The slot was positioned at the 45 percent chord station and the slot exit width was 0.047-in. Tests were also performed with the slot positioned at the 35 percent chord station and with slot widths of 0.63 and 0.094-in. These data were correlated to indicate the effects of slot location and slot width on minimum loss incidence and deviation angles. In addition, a comparison is presented of the performance parameters for cascades of slotted and unslotted hydrofoils.

  17. Local fallout from nuclear test detonations. Volume 2. Compilation of fallout patterns and related test data. Supplement. Foreign nuclear tests. Sanitized

    Energy Technology Data Exchange (ETDEWEB)

    Morgenthau, M.; Showers, R.L.

    1964-10-01

    The available fallout patterns and related test data for nuclear weapon tests conducted by the United Kingdom, the Republic of France, and the Union of Soviet Socialist Republics, are included in this supplement to NDL-TR-34. The related test data for the British and French tests include: date and time of detonation, location of test site, total yield, fission yield, type of burst and placement, height of burst, cloud-top and -bottom heights, crater data, and wind information up to nuclear cloud-top height. No fallout patterns are available for any of the Soviet detonations. The list of Soviet detonations, which is as comprehensive as possible, contains the chronological order of the detonations, date, yield, type of burst and location of test site.

  18. SRM Internal Flow Tests and Computational Fluid Dynamic Analysis. Volume 2; RSRM Full Scale Motor Analyses

    Science.gov (United States)

    1995-01-01

    The purpose of the RSRM Nozzle Slag Ejection Precursor Test is to investigate the effect that slag ejection from the RSRM nozzle has on the chamber pressure and trust of the SRB's. In past firings of the Reusable Solid Rocket Motor (RSRM) both static test and flight motors have shown small pressure perturbations occurring primarily between 65 and 80 seconds. A joint NASA/Thiokol team investigation concluded that the cause of the pressure perturbations was the periodic ingestion and ejection of molten aluminum oxide slag from the cavity around the submerged nozzle nose which tends to trap and collect individual aluminum oxide droplets from the approach flow. The conclusions of the team were supported by numerous data and observations from special tests including high speed photographic films, real time radiography, plume calorimeters, accelerometers, strain gauges, nozzle TVC system force gauges, and motor pressure and thrust data. A simplistic slag ballistics model was formulated to relate a given pressure perturbation to a required slag quantity. Also, a cold flow model using air and water was developed to provide data on the relationship between the slag flow rate and the chamber pressure increase. Both the motor and the cold flow model exhibited low frequency oscillations in conjunction with periods of slag ejection. Motor and model frequencies were related to scaling parameters. The data indicate that there is a periodicity to the slag entrainment and ejection phenomena which is possibly related to organized oscillations from instabilities in the dividing streamline shear layer which impinges on the underneath surface of the nozzle.

  19. Investment Strategy for DoD Automatic Test Systems. Volume 1. Summary and Analyses

    Science.gov (United States)

    1994-01-01

    authors of this paper) the fol- lowing personnel from OSD, the Services, and IDA: Ms . Christine Fisher (DoD Chairper- son of the Study Team), Mr...Michael Bloom, Mr. Bill Darling, Mr. Steven Freschi, CMSgt Terry Lambert, Mr. Jonathan MacMillian, Mr. Wesley McElveen, Ms . Kate O’Sullivan, Mr. Bill Ross...were selected for this scenario. The scenario applied ATS mid-life additions (updates) to accommodate new F-15 C/D testing needs for the MTS, 0 MSIP

  20. Titan IIIC Transtage/Stage 2 Separation-Shock Bench Test. Volume 3

    Science.gov (United States)

    1975-11-01

    2 6 15o I Frequency, HzJ Bench Shock Test - Stage II/III Separation, Run 10Measurement No. 4 - Longitudinal axis longeron nearstation 117 !• , 149 A...6I 5 5 4 33 3 10CC- O-10 I--L 87 8 i5 5 : -- 6 1ench Sh c- es -t ge I / I Se a a i n Ru02 1 2~w Me srm n No L N Lo g td n l0xsIn eo

  1. Composite materials. Volume 1: Properties, non-destructive testing, and repair

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, M.M. [United Technologies Corp., East Hartford, CT (United States)

    1997-12-31

    This book provides a practical overview of the different types, properties, applications and design implementations of the latest composite materials. It describes important composite families, including metals, ceramics, polymers and other engineered materials; shows how each type of composite may be designed, manufactured, strengthened, and repaired; introduces composite modeling techniques; and explains the major industrial applications for composites. Primary markets for this book include materials engineers and designers in aerospace, automotive and transportation industries; works managers, facilities engineers, test engineers, plant engineers, manufacturing and industrial engineers, and production managers; students in material science, mechanical engineering and metallurgy.

  2. Evaluation of solar radiation measurement systems: EPRI/NREL final test report. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Stoffel, T; Riordan, C; Bigger, J

    1992-11-01

    Measured solar radiation resource data are needed by electric utilities to evaluate the potential of renewable energy options like photovoltaics in their service territory. In this final test report, we document a cooperative project of the Electric Power Research Institute (EPRI) and the National Renewable Energy Laboratory (NREL) to compare available measurement system options for performing solar radiation resource assessments. We present the detailed results of a 6-month field comparison of thermopile-based pyranometer and pyrheliometer solar irradiance measurement systems with two different implementations of the rotating shadowband radiometer (RSR) concept installed at NREL`s Solar Radiation Research Laboratory (SRRL) in Golden, Colorado.

  3. Closure report for CAU 93: Area 6 steam cleaning effluent ponds, Nevada Test Site. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The Steam Cleaning Effluent Ponds (SCEP) waste unit is located in Area 6 at the Nevada Test Site. The SCEPs are evaporation basins formerly used for the disposal of untreated liquid effluent discharged from steam cleaning activities associated with Buildings 6-623 and 6-800. This closure report documents the strategy and analytical results that support the clean closure or closure in place of each of the components within CAU 93. In addition, the report documents all deviations from the approved closure plan and provides rationale for all deviations.

  4. AGARD Flight Test Instrumentation Series. Volume 11. Pressure and Flow Measurement

    Science.gov (United States)

    1980-07-01

    PdgPt-Pa pression qc,Pd dynamischer qc impact pressure pressure dynamique Druck 1 24 q 7k:v kinetic - pression q kinetischer q dynamic...number of parallel transducers may have to be used. To save weight and cost, up to 48 pressures of up to 200 bar press- ure scanners (scanivalves...control is accomplished following "ATLAS"-requirement5 by means of a scanner unit, giving access to designated test pins on the computer’s main

  5. In Situ Soil Venting - Full Scale Test, Hill AFB. Volume 3. Guidance Document, Literature Review

    Science.gov (United States)

    1991-08-01

    s ý GCE Form A•pproved REPORT DOCUMENTATION PAGE CMBNO 070401’ihs a EERORT C ,RI Y C•.ASSFCA ,ON ’t .• ESTR !CTiVE MARKINGS .a SECURT’Y CLASSiFICAT...extremely useful, however, for a tesi of the applicability of venting to qucstionahlc situations (--frcrcncc 14) or for providing a site-specific correlation...consideration of the results ot this tesi : (I) the temperatures achieved in this test were shown to have the potential for si-,incant increases in

  6. Larger testes are associated with a higher level of polyandry, but a smaller ejaculate volume, across bushcricket species (Tettigoniidae).

    Science.gov (United States)

    Vahed, Karim; Parker, Darren J; Gilbert, James D J

    2011-04-23

    While early models of ejaculate allocation predicted that both relative testes and ejaculate size should increase with sperm competition intensity across species, recent models predict that ejaculate size may actually decrease as testes size and sperm competition intensity increase, owing to the confounding effect of potential male mating rate. A recent study demonstrated that ejaculate volume decreased in relation to increased polyandry across bushcricket species, but testes mass was not measured. Here, we recorded testis mass for 21 bushcricket species, while ejaculate (ampulla) mass, nuptial gift mass, sperm number and polyandry data were largely obtained from the literature. Using phylogenetic-comparative analyses, we found that testis mass increased with the degree of polyandry, but decreased with increasing ejaculate mass. We found no significant relationship between testis mass and either sperm number or nuptial gift mass. While these results are consistent with recent models of ejaculate allocation, they could alternatively be driven by substances in the ejaculate that affect the degree of polyandry and/or by a trade-off between resources spent on testes mass versus non-sperm components of the ejaculate.

  7. Aerodynamic control of NASP-type vehicles through Vortex manipulation. Volume 1: Static water tunnel tests

    Science.gov (United States)

    Suarez, Carlos J.; Ng, T. Terry; Ong, Lih-Yenn; Malcolm, Gerald N.

    1993-01-01

    Water tunnel tests were conducted on a NASP-type configuration to evaluate different pneumatic Forebody Vortex Control (FVC) methods. Flow visualization and yawing moment measurements were performed at angles of attack from 0 deg to 30 deg. The pneumatic techniques tested included jet and slot blowing. In general, blowing can be used efficiently to manipulate the forebody vortices at angles of attack greater than 20 deg. These vortices are naturally symmetric up to alpha = 25 deg and asymmetric between 25 deg and 30 deg angle of attack. Results indicate that tangential aft jet blowing is the most promising method for this configuration. Aft jet blowing produces a yawing moment towards the blowing side and the trends with blowing rate are well behaved. The size of the nozzle is not the dominant factor in the blowing process; the change in the blowing 'momentum,' i.e., the product of the mass flow rate and the velocity of the jet, appears to be the important parameter in the water tunnel (incompressible and unchoked flow at the nozzle exit). Forward jet blowing is very unpredictable and sensitive to mass flow rate changes. Slot blowing (with the exception of very low blowing rates) acts as a flow 'separator'; it promotes early separation on the blow side, producing a yawing moment toward the non-blowing side for the C(sub mu) range investigated.

  8. Second generation pressurized fluidized-bed combustion (PFBC) research and development, Phase 2 -- Task 4, carbonizer testing. Volume 1, Test results

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, R.; Robertson, A.; Vanhook, J.; Goyal, A.; Rehmat, A.; Newby, R.

    1994-11-01

    During the period beginning November 1991 and ending September 1992, a series of tests were conducted at Foster Wheeler Development Corporation in a fluidized-bed coal carbonizer to determine its performance characteristics. The carbonizer was operated for 533 hours in a jetting fluidized-bed configuration during which 36 set points (steady-state periods) were achieved. Extensive data were collected on the feed and product stream compositions, heating values, temperatures, and flow rates. With these data, elemental and energy balances were computed to evaluate and confirm accuracy of the data. The carbonizer data were not as self-consistent as could be desired (balance closure imperfection). A software package developed by Science Ventures, Inc., of California, called BALAID, was used to reconcile the carbonizer data; the details of the reconciliation have been given in Volume 1 of this report. The reconciled data for the carbonizer were rigorously analyzed, correlations were developed, and the model was updated accordingly. The model was then used in simulating each of the 36 steady-state periods achieved in the pilot plant. The details are given in this Volume of the report.

  9. Boise Hydrogeophysical Research Site: Control Volume/Test Cell and Community Research Asset

    Science.gov (United States)

    Barrash, W.; Bradford, J.; Malama, B.

    2008-12-01

    The Boise Hydrogeophysical Research Site (BHRS) is a research wellfield or field-scale test facility developed in a shallow, coarse, fluvial aquifer with the objectives of supporting: (a) development of cost- effective, non- or minimally-invasive quantitative characterization and imaging methods in heterogeneous aquifers using hydrologic and geophysical techniques; (b) examination of fundamental relationships and processes at multiple scales; (c) testing theories and models for groundwater flow and solute transport; and (d) educating and training of students in multidisciplinary subsurface science and engineering. The design of the wells and the wellfield support modular use and reoccupation of wells for a wide range of single-well, cross-hole, multiwell and multilevel hydrologic, geophysical, and combined hydrologic-geophysical experiments. Efforts to date by Boise State researchers and collaborators have been largely focused on: (a) establishing the 3D distributions of geologic, hydrologic, and geophysical parameters which can then be used as the basis for jointly inverting hard and soft data to return the 3D K distribution and (b) developing subsurface measurement and imaging methods including tomographic characterization and imaging methods. At this point the hydrostratigraphic framework of the BHRS is known to be a hierarchical multi-scale system which includes layers and lenses that are recognized with geologic, hydrologic, radar, seismic, and EM methods; details are now emerging which may allow 3D deterministic characterization of zones and/or material variations at the meter scale in the central wellfield. Also the site design and subsurface framework have supported a variety of testing configurations for joint hydrologic and geophysical experiments. Going forward we recognize the opportunity to increase the R&D returns from use of the BHRS with additional infrastructure (especially for monitoring the vadose zone and surface water-groundwater interactions

  10. 64 kW concentrator Photovoltaics Application Test Center. Volume. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jardine, D.M.; Jones, D.W.

    1980-06-01

    Kaman Sciences Corporation has designed a 64 kW Concentrating Photovoltaic Applications Test Center (APTEC). The APTEC employs a combined concentrating photovoltaic array in a total energy system application for load sharing the electric and thermal demands of a large computer center with the interfaced electric and natural gas utility. The photovoltaic array is composed of two-axis tracking heliostats of Fresnel lens concentrating, silicon solar cell modules. The modules are cooled with a fluid which transfers heat to a ground coupled heat sink/storage unit for subsequent use in meeting the computer center's thermal load demand. The combined photovoltaic power system shares basic components - a power conditioning unit, batteries and thermal conditioning equipment - with the electric and natural gas utility service, improving the computer center's operating availability time and displacing a portion of the fossil fuel required to power the computer center with solar energy. The detailed system design is reported.

  11. Impact Properties of Engineered Cementitious Composites with High Volume Fly Ash Using SHPB Test

    Institute of Scientific and Technical Information of China (English)

    CHEN Zhitao; YANG Yingzi; YAO Yan

    2012-01-01

    The split Hopkinson pressure bar (SHPB) testing with diameter 40 mm was used to investigate the dynamic mechanical properties of engineered cementitious composites (ECCs) with different fly ash content.The basic properties including deformation,energy absorption capacity,strain-stress relationship and failure patterns were discussed.The ECCs showed strain-rate dependency and kept better plastic flow during impact process compared with reactive powder concrete (RPC) and concrete,but the critical compressive strength was lower than that of R-PC and concrete.The bridging effect of PVA fiber and addition of fly ash can significantly improve the deformation and energy absorption capacities of ECCs.With the increase of fly ash content in ECCs,the static and dynamic compressive strength lowered and the dynamic increase factor enhanced,Therefore,to meet different engineering needs,the content of fly ash can be an important index to control the static and dynamic mechanical properties of ECCs.

  12. Performance Evaluation of Advanced Retrofit Roof Technologies Using Field-Test Data Phase Three Final Report, Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Kaushik [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Childs, Phillip W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Atchley, Jerald Allen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-01-01

    This article presents some miscellaneous data from two low-slope and two steep-slope experimental roofs. The low-slope roofs were designed to compare the performance of various roof coatings exposed to natural weatherization. The steep-slope roofs contained different combinations of phase change material, rigid insulation, low emittance surface and above-sheathing ventilation, with standing-seam metal panels on top. The steep-slope roofs were constructed on a series of adjacent attics separated at the gables using thick foam insulation. This article describes phase three (3) of a study that began in 2009 to evaluate the energy benefits of a sustainable re-roofing technology utilizing standing-seam metal roofing panels combined with energy efficient features like above-sheathing-ventilation (ASV), phase change material (PCM) and rigid insulation board. The data from phases 1 and 2 have been previously published and reported [Kosny et al., 2011; Biswas et al., 2011; Biswas and Childs, 2012; Kosny et al., 2012]. Based on previous data analyses and discussions within the research group, additional test roofs were installed in May 2012, to test new configurations and further investigate different components of the dynamic insulation systems. Some experimental data from phase 3 testing from May 2012 to December 2013 and some EnergyPlus modeling results have been reported in volumes 1 and 3, respectively, of the final report [Biswas et al., 2014; Biswas and Bhandari, 2014].

  13. Tidal volume single breath washout of two tracer gases--a practical and promising lung function test.

    Directory of Open Access Journals (Sweden)

    Florian Singer

    Full Text Available BACKGROUND: Small airway disease frequently occurs in chronic lung diseases and may cause ventilation inhomogeneity (VI, which can be assessed by washout tests of inert tracer gas. Using two tracer gases with unequal molar mass (MM and diffusivity increases specificity for VI in different lung zones. Currently washout tests are underutilised due to the time and effort required for measurements. The aim of this study was to develop and validate a simple technique for a new tidal single breath washout test (SBW of sulfur hexafluoride (SF(6 and helium (He using an ultrasonic flowmeter (USFM. METHODS: The tracer gas mixture contained 5% SF(6 and 26.3% He, had similar total MM as air, and was applied for a single tidal breath in 13 healthy adults. The USFM measured MM, which was then plotted against expired volume. USFM and mass spectrometer signals were compared in six subjects performing three SBW. Repeatability and reproducibility of SBW, i.e., area under the MM curve (AUC, were determined in seven subjects performing three SBW 24 hours apart. RESULTS: USFM reliably measured MM during all SBW tests (n = 60. MM from USFM reflected SF(6 and He washout patterns measured by mass spectrometer. USFM signals were highly associated with mass spectrometer signals, e.g., for MM, linear regression r-squared was 0.98. Intra-subject coefficient of variation of AUC was 6.8%, and coefficient of repeatability was 11.8%. CONCLUSION: The USFM accurately measured relative changes in SF(6 and He washout. SBW tests were repeatable and reproducible in healthy adults. We have developed a fast, reliable, and straightforward USFM based SBW method, which provides valid information on SF(6 and He washout patterns during tidal breathing.

  14. Investigation of the boundary layer during the transition from volume to surface dominated H⁻ production at the BATMAN test facility.

    Science.gov (United States)

    Wimmer, C; Schiesko, L; Fantz, U

    2016-02-01

    BATMAN (Bavarian Test Machine for Negative ions) is a test facility equipped with a 18 scale H(-) source for the ITER heating neutral beam injection. Several diagnostics in the boundary layer close to the plasma grid (first grid of the accelerator system) followed the transition from volume to surface dominated H(-) production starting with a Cs-free, cleaned source and subsequent evaporation of caesium, while the source has been operated at ITER relevant pressure of 0.3 Pa: Langmuir probes are used to determine the plasma potential, optical emission spectroscopy is used to follow the caesiation process, and cavity ring-down spectroscopy allows for the measurement of the H(-) density. The influence on the plasma during the transition from an electron-ion plasma towards an ion-ion plasma, in which negative hydrogen ions become the dominant negatively charged particle species, is seen in a strong increase of the H(-) density combined with a reduction of the plasma potential. A clear correlation of the extracted current densities (j(H(-)), j(e)) exists with the Cs emission.

  15. Investigation of the boundary layer during the transition from volume to surface dominated H- production at the BATMAN test facility

    Science.gov (United States)

    Wimmer, C.; Schiesko, L.; Fantz, U.

    2016-02-01

    BATMAN (Bavarian Test Machine for Negative ions) is a test facility equipped with a 1/8 scale H- source for the ITER heating neutral beam injection. Several diagnostics in the boundary layer close to the plasma grid (first grid of the accelerator system) followed the transition from volume to surface dominated H- production starting with a Cs-free, cleaned source and subsequent evaporation of caesium, while the source has been operated at ITER relevant pressure of 0.3 Pa: Langmuir probes are used to determine the plasma potential, optical emission spectroscopy is used to follow the caesiation process, and cavity ring-down spectroscopy allows for the measurement of the H- density. The influence on the plasma during the transition from an electron-ion plasma towards an ion-ion plasma, in which negative hydrogen ions become the dominant negatively charged particle species, is seen in a strong increase of the H- density combined with a reduction of the plasma potential. A clear correlation of the extracted current densities (jH-, je) exists with the Cs emission.

  16. Test-retest reliability of automated whole body and compartmental muscle volume measurements on a wide bore 3T MR system

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Marianna S.; Newman, David; Kasmai, Bahman; Greenwood, Richard; Malcolm, Paul N. [Norfolk and Norwich University Hospital, Department of Radiology, Norwich (United Kingdom); Leinhard, Olof Dahlqvist [Linkoeping University, Center for Medical Image Science and Visualization, Linkoeping (Sweden); Linkoeping University, Department of Medical and Health Sciences, Linkoeping (Sweden); Karlsson, Anette; Borga, Magnus [Linkoeping University, Center for Medical Image Science and Visualization, Linkoeping (Sweden); Linkoeping University, Department of Biomedical Engineering, Linkoeping (Sweden); Rosander, Johannes [Advanced MR Analytics AB, Linkoeping (Sweden); Toms, Andoni P. [Norfolk and Norwich University Hospital, Department of Radiology, Norwich (United Kingdom); Radiology Academy, Cotman Centre, Norwich, Norfolk (United Kingdom)

    2014-09-15

    To measure the test-retest reproducibility of an automated system for quantifying whole body and compartmental muscle volumes using wide bore 3 T MRI. Thirty volunteers stratified by body mass index underwent whole body 3 T MRI, two-point Dixon sequences, on two separate occasions. Water-fat separation was performed, with automated segmentation of whole body, torso, upper and lower leg volumes, and manually segmented lower leg muscle volumes. Mean automated total body muscle volume was 19.32 L (SD9.1) and 19.28 L (SD9.12) for first and second acquisitions (Intraclass correlation coefficient (ICC) = 1.0, 95 % level of agreement -0.32-0.2 L). ICC for all automated test-retest muscle volumes were almost perfect (0.99-1.0) with 95 % levels of agreement 1.8-6.6 % of mean volume. Automated muscle volume measurements correlate closely with manual quantification (right lower leg: manual 1.68 L (2SD0.6) compared to automated 1.64 L (2SD 0.6), left lower leg: manual 1.69 L (2SD 0.64) compared to automated 1.63 L (SD0.61), correlation coefficients for automated and manual segmentation were 0.94-0.96). Fully automated whole body and compartmental muscle volume quantification can be achieved rapidly on a 3 T wide bore system with very low margins of error, excellent test-retest reliability and excellent correlation to manual segmentation in the lower leg. (orig.)

  17. Guidelines for selecting codes for ground-water transport modeling of low-level waste burial sites. Volume 2. Special test cases

    Energy Technology Data Exchange (ETDEWEB)

    Simmons, C.S.; Cole, C.R.

    1985-08-01

    This document was written for the National Low-Level Waste Management Program to provide guidance for managers and site operators who need to select ground-water transport codes for assessing shallow-land burial site performance. The guidance given in this report also serves the needs of applications-oriented users who work under the direction of a manager or site operator. The guidelines are published in two volumes designed to support the needs of users having different technical backgrounds. An executive summary, published separately, gives managers and site operators an overview of the main guideline report. Volume 1, titled ''Guideline Approach,'' consists of Chapters 1 through 5 and a glossary. Chapters 2 through 5 provide the more detailed discussions about the code selection approach. This volume, Volume 2, consists of four appendices reporting on the technical evaluation test cases designed to help verify the accuracy of ground-water transport codes. 20 refs.

  18. LIKELIHOOD RATIO TESTS OF HYPOTHESES ON MULTIVARIATE POPULATIONS, VOLUME 1, DISTRIBUTION THEORY--STATISTICAL MODELS FOR THE EVALUATION AND INTERPRETATION OF EDUCATIONAL CRITERIA, PART 4.

    Science.gov (United States)

    SAW, J.G.

    THIS VOLUME DEALS WITH THE BIVARIATE NORMAL DISTRIBUTION. THE AUTHOR MAKES A DISTINCTION BETWEEN DISTRIBUTION AND DENSITY FROM WHICH HE DEVELOPS THE CONSEQUENCES OF THIS DISTINCTION FOR HYPOTHESIS TESTING. OTHER ENTRIES IN THIS SERIES ARE ED 003 044 AND ED 003 045. (JK)

  19. Office of Technology Development`s Research, Development, Demonstration, Testing and Evaluation Mid-Year Program Review. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This document, Volume 2, presents brief summaries of programs being investigated at USDOE sites for waste processing, remedial action, underground storage tank remediation, and robotic applications in waste management.

  20. G. M. Koelemay well No. 1, Jefferson County, Texas. Volume I. Completion and testing: testing geopressured geothermal reservoirs in existing wells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The acquisition, completion, and testing of a geopressured-geothermal well are described. The following are covered: geology; petrophysics; re-entry and completion operations - test well; drilling and completion operations - disposal well; test objectives; surface testing facilities; pre-test operations; test sequence; test results and analysis; and return of wells and location to operator. (MHR)

  1. Relation Between Pressure and Volume Unloading During Ramp Testing in Patients Supported with a Continuous-Flow Left Ventricular Assist Device

    DEFF Research Database (Denmark)

    Jung, Mette H; Hassager, Christian; Balling, Louise;

    2015-01-01

    Pulmonary capillary wedge pressure (PCWP) is the key to describing left ventricular (LV) unloading, however, the relation between pressure and the echocardiography-derived surrogate of LV volume (left ventricular end-diastolic diameter (LVEDD)) as a function of pump speed (RPM) in continuous......-flow left ventricular assist device (CF-LVAD) patients is unknown. In this study the pressure-volume relationship as a function of RPM during ramp testing was investigated by simultaneously measuring PCWP by Swan-Ganz catheter and LVEDD by echocardiography. The ramp protocol started at usual pump setting...

  2. Behavior of testosterone and cortisol during an intensity-controlled high-volume training period measured by a training task-specific test in men rowers.

    Science.gov (United States)

    Rämson, Raul; Jürimäe, Jaak; Jürimäe, Toivo; Mäestu, Jarek

    2009-03-01

    The aim of this study was to investigate changes in the stress hormones testosterone and cortisol after a task-specific exercise during a high-volume endurance training cycle in men rowers. Eight highly trained men rowers were investigated during a high-volume, low-intensity training period. A 2-hour, low-intensity, long-distance rowing (LDT) test was conducted at baseline, after a high-volume period, and after the recovery period. Training and performance intensities were obtained at the graded incremental test, were preset individually, and were the same during all LDTs. Fasting blood samples were taken during the same days as the LDTs. Exercise-induced blood samples were taken before, 5 minutes after, and 30 minutes after (post 30') the completion of each LDT. There were no significant changes in fasting cortisol and testosterone values during the whole study period, and there were no significant changes in cortisol and testosterone concentrations during the LDT. However, testosterone concentration was significantly decreased at post 30' compared with posttest values during the second LDT that was held after the 2-week high-training-volume period, and, during the second LDT, post 30' values of cortisol tended to be decreased compared with posttest values (p = 0.063). In conclusion, changes in the concentrations of testosterone and cortisol after long-distance rowing indicate decreased adaptivity after the training-specific performance test.

  3. Mean corpuscular volume of control red blood cells determines the interpretation of eosin-5'-maleimide (EMA) test result in infants aged less than 6 months.

    Science.gov (United States)

    Ciepiela, Olga; Adamowicz-Salach, Anna; Bystrzycka, Weronika; Łukasik, Jan; Kotuła, Iwona

    2015-08-01

    Eosin-5'-maleimide (EMA) binding test is a flow cytometric test used to detect hereditary spherocytosis (HS). To perform the test sample from patients, 5-6 reference samples of red blood are needed. Our aim was to investigate how the mean corpuscular volume (MCV) of red blood cells influences on the value of fluorescence of bounded EMA dye and how the choice of reference samples affects the test result. EMA test was performed in peripheral blood from 404 individuals, including 31 children suffering from HS. Mean fluorescence channel of EMA-RBCs was measured with Cytomics FC500 flow cytometer. Mean corpuscular volume of RBCs was assessed with LH750 Beckman Coulter. Statistical analysis was performed using Graph Pad Prism. The correlation Spearman coefficient between mean channel of fluorescence of EMA-RBCs and MCV was r = 0.39, p result might be negative. Due to different MCV values of RBCs in infancy and ca. Three months later, EMA test in neonates might be interpreted falsely negative. Samples from children younger than 3 months old had EMA test result 86.1 ± 11.7 %, whereas same samples that analyzed 4.1 ± 2.1 later had results of 75.4 ± 4.5 %, p results; thus, we recommend selection of reference samples with MCV in range of ±2 fL compared to MCV of patient RBC's.

  4. Test Methods for Telemetry Systems and Subsystems: Volume 5: Test Method for Digital Recorder/Reproducer Systems and Recorder Memory Modules

    Science.gov (United States)

    2011-12-01

    PERFORMING ORGANIZATION REPORT NUMBER 118-11 Volume V 9. SPONSORING/ MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) 11...involved. Several IRIG 106 Chapter 10 packet dumper utilities are available to help in this manual task. Current freely available versions can be

  5. High Voltage Test Apparatus for a Neutron EDM Experiment and Lower Limit on the Dielectric Strength of Liquid Helium at Large Volumes

    CERN Document Server

    Long, J C; Boissevain, J G; Clark, D J; Cooper, M D; Gómez, J J; Lamoreaux, S K; Mischke, R E; Penttila, S I

    2006-01-01

    A new search for a permanent electric dipole moment (EDM) of the neutron is underway using ultracold neutrons produced and held in a bath of superfluid helium. Attaining the target sensitivity requires maintaining an electric field of several tens of kilovolts per centimeter across the experimental cell, which is nominally 7.5 cm wide and will contain about 4 liters of superfluid. The electrical properties of liquid helium are expected to be sufficient to meet the design goals, but little is known about these properties for volumes and electrode spacings appropriate to the EDM experiment. Furthermore, direct application of the necessary voltages from an external source to the experimental test cell is impractical. An apparatus to amplify voltages in the liquid helium environment and to test the electrical properties of the liquid for large volumes and electrode spacings has been constructed. The device consists of a large-area parallel plate capacitor immersed in a 200 liter liquid helium dewar. Preliminary r...

  6. Proceedings of the Third NRC/ASME Symposium on Valve and Pump Testing. Session 1A--Session 2C: Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The 1994 Symposium on Valve and Pump Testing, jointly sponsored by the Board of Nuclear Codes and Standards of the American Society of Mechanical Engineers and by the Nuclear Regulatory Commission, provides a forum for the discussion of current programs and methods for inservice testing and motor-operated valve testing at nuclear power plants. The symposium also provides an opportunity to discuss the need to improve that testing in order to help ensure the reliable performance of pumps and valves. The participation of industry representatives, regulators, and consultants results in the discussion of a broad spectrum of ideas and perspectives regarding the improvement of inservice testing of pumps and valves at nuclear power plants. This document, Volume 1, covers sessions 1A through session 2C. The individual papers have been cataloged separately.

  7. AGARD Flight Test Series. Volume 10. Weapon Delivery Analysis and Ballistic Flight Testing (L’Analyse du Largage d’Armes et les en Vol Balistique).

    Science.gov (United States)

    1992-07-01

    de ce volume figure ci-dessous. LAGARD peut etre tier que ces personnes competentes aient bien voulu accepter de partager leurs connaissances et...de travail sur les techniques des essais en vol a ete recree pour mener ä bien cette täche. Les monographies dans cette serie (a l’exception de la AG...DOIVENT ETRE ADRESSEES DIRECTEMENT AU SERVICE NATIONAL TECHNIQUE DE ^INFORMATION (NTIS) DONT LADRESSE SUIT. National Technical Information Service

  8. Demonstration, testing, and evaluation of in situ heating of soil. Final report, Volume 2, Appendices A to E

    Energy Technology Data Exchange (ETDEWEB)

    Dev, H.; Enk, J.; Jones, D.; Sabato, W.

    1996-04-05

    This is a final report presented in two volumes. Volume I contains the technical report and Volume II contains appendices with background information and data. In this project approximately 300 cubic yards of clayey soil containing a low concentration plume of volatile organic chemicals was heated in situ by the application of electrical energy. It was shown that as a result of heating the effective permeability of soil to air flow was increased such that in situ soil vapor extraction could be performed. The initial permeability of soil was so low that the soil gas flow rate was immeasurably small even at high vacuum levels. It was demonstrated that the mass flow rate of the volatile organic chemicals was enhanced in the recovered soil gas as a result of heating. When scaled up, this process can be used for the environmental clean up and restoration of DOE sites contaminated with VOC`s and other organic chemicals. Although it may be applied to many types of soil formations, it is particularly attractive for low permeability clayey soil where conventional in situ venting techniques are limited by air flow.

  9. Programmatic implications of implementing the relational algebraic capacitated location (RACL) algorithm outcomes on the allocation of laboratory sites, test volumes, platform distribution and space requirements.

    Science.gov (United States)

    Cassim, Naseem; Smith, Honora; Coetzee, Lindi M; Glencross, Deborah K

    2017-01-01

    CD4 testing in South Africa is based on an integrated tiered service delivery model that matches testing demand with capacity. The National Health Laboratory Service has predominantly implemented laboratory-based CD4 testing. Coverage gaps, over-/under-capacitation and optimal placement of point-of-care (POC) testing sites need investigation. We assessed the impact of relational algebraic capacitated location (RACL) algorithm outcomes on the allocation of laboratory and POC testing sites. The RACL algorithm was developed to allocate laboratories and POC sites to ensure coverage using a set coverage approach for a defined travel time (T). The algorithm was repeated for three scenarios (A: T = 4; B: T = 3; C: T = 2 hours). Drive times for a representative sample of health facility clusters were used to approximate T. Outcomes included allocation of testing sites, Euclidian distances and test volumes. Additional analysis included platform distribution and space requirement assessment. Scenarios were reported as fusion table maps. Scenario A would offer a fully-centralised approach with 15 CD4 laboratories without any POC testing. A significant increase in volumes would result in a four-fold increase at busier laboratories. CD4 laboratories would increase to 41 in scenario B and 61 in scenario C. POC testing would be offered at two sites in scenario B and 20 sites in scenario C. The RACL algorithm provides an objective methodology to address coverage gaps through the allocation of CD4 laboratories and POC sites for a given T. The algorithm outcomes need to be assessed in the context of local conditions.

  10. Programmatic implications of implementing the relational algebraic capacitated location (RACL algorithm outcomes on the allocation of laboratory sites, test volumes, platform distribution and space requirements

    Directory of Open Access Journals (Sweden)

    Naseem Cassim

    2017-02-01

    Full Text Available Introduction: CD4 testing in South Africa is based on an integrated tiered service delivery model that matches testing demand with capacity. The National Health Laboratory Service has predominantly implemented laboratory-based CD4 testing. Coverage gaps, over-/under-capacitation and optimal placement of point-of-care (POC testing sites need investigation.Objectives: We assessed the impact of relational algebraic capacitated location (RACL algorithm outcomes on the allocation of laboratory and POC testing sites.Methods: The RACL algorithm was developed to allocate laboratories and POC sites to ensure coverage using a set coverage approach for a defined travel time (T. The algorithm was repeated for three scenarios (A: T = 4; B: T = 3; C: T = 2 hours. Drive times for a representative sample of health facility clusters were used to approximate T. Outcomes included allocation of testing sites, Euclidian distances and test volumes. Additional analysis included platform distribution and space requirement assessment. Scenarios were reported as fusion table maps.Results: Scenario A would offer a fully-centralised approach with 15 CD4 laboratories without any POC testing. A significant increase in volumes would result in a four-fold increase at busier laboratories. CD4 laboratories would increase to 41 in scenario B and 61 in scenario C. POC testing would be offered at two sites in scenario B and 20 sites in scenario C.Conclusion: The RACL algorithm provides an objective methodology to address coverage gaps through the allocation of CD4 laboratories and POC sites for a given T. The algorithm outcomes need to be assessed in the context of local conditions.

  11. Users Manual for the Essex Automated Performance Test System (APTS). Volume 1. Users Manual. Appendices A and B.

    Science.gov (United States)

    1988-05-16

    most heavily; and a motor speed factor identified by the Tapping and Reaction Time tests. The Wonderlic Personnel Test was group administered before...the first and after the last administration of the performance tests. The multiple R’s in the total sample between combined Wonderlic as criterion and

  12. Planning and design of additional East Mesa Geothermal Test Facilities. Phase 1B. Volume II. Procurement package

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, R.O.

    1976-10-15

    Procurement packages of technical specifications and construction drawings for eleven test facility additions to the ERDA East Mesa Geothermal Component Test Facility are presented. Each of the specifications includes all of the technical requirements needed for procurement and construction starting with Division 2. The information is presented under the following subject headings: injection pump system: 52-2 injection pipeline; control and instrumentation spools; calibration test bench; test pad modifications; test pad piping headers; production and injection wells; well 5-2 modifications; well 8-1 down-hole pump; well 6-1 down-hole pump; and well 8-1 booster pump. (JGB)

  13. Design and experiment of spectrometer based on scanning micro-grating integrating with angle sensor

    Science.gov (United States)

    Biao, Luo; Wen, Zhi-yu

    2014-01-01

    A compact, low cost, high speed, non-destructive testing NIR (near infrared) spectrometer optical system based on MOEMS grating device is developed. The MOEMS grating works as the prismatic element and wavelength scanning element in our optical system. The MOEMS grating enables the design of compact grating spectrometers capable of acquiring full spectra using a single detector element. This MOEMS grating is driven by electromagnetic force and integrated with angle sensor which used to monitored deflection angle while the grating working. Comparing with the traditional spectral system, there is a new structure with a single detector and worked at high frequency. With the characteristics of MOEMS grating, the structure of the spectrometer system is proposed. After calculating the parameters of the optical path, ZEMAX optical software is used to simulate the system. According the ZEMAX output file of the 3D model, the prototype is designed by SolidWorks rapidly, fabricated. Designed for a wavelength range between 800 nm and 1500 nm, the spectrometer optical system features a spectral resolution of 16 nm with the volume of 97 mm × 81.7 mm × 81 mm. For the purpose of reduce modulated effect of sinusoidal rotation, spectral intensity of the different wavelength should be compensated by software method in the further. The system satisfies the demand of NIR micro-spectrometer with a single detector.

  14. Next-generation PIR security sensors: concept testing and evaluation

    Science.gov (United States)

    Liddiard, Kevin C.

    2009-05-01

    In previous presentations to this SPIE forum a new technology was outlined aimed at replacing pyroelectric sensors with resistance microbolometer MOEMS-based sensors capable of vastly superior performance. The technology can be implemented as either a PCB replacement to current sensors, giving extended detection range and ability to sense slow temperature change, or a 'smart' sensor with further performance enhancements and imaging capability. This paper reports the results of new laboratory and field tests of a laboratory prototype sensor and extrapolates these results to performance of production sensors. In particular, results are presented for NETD, detection range for human targets and detection of simulated electrical faults and developing fires. Previous results were reported for FPA operated without evacuation and using a low cost plastic Fresnel lens. However with wafer level packaging now becoming widely available in MEMS and CMOS foundries, much high performance can be achieved, opening up many additional applications. Performance of new FPAs designed for vacuum packaging is highlighted.

  15. Association of Levels of Serum Inhibin B and Follicle-stimulating Hormone with Testicular Vascularity, Volume, and Echotexture in Children with Undescended Testes

    Science.gov (United States)

    Chinya, Abhishek; Ratan, Simmi K.; Aggarwal, Satish K.; Garg, Anju; Mishra, T. K.

    2017-01-01

    Aims: The aim of our study was to assess the association between reproductive hormones (inhibin B [inh B], follicle-stimulating hormone [FSH]) with testicular volume, echogenicity, and blood flow (resistive index [RI]) in children with undescended testis (UDT). Settings and Design: This was a prospective study of 1-year study duration. Materials and Methods: A total of 33 patients (16 unilateral and 17 bilateral) UDTs aged 5–12 years with palpable UDT were included in the study. Morning fasting blood samples were taken for estimation of serum inh B and FSH as well as inh B/FSH ratio. Testicular ultrasound was done to compute testicular volume, testicular echogenicity, and testicular vascularity in terms of RI. Results: The mean age of patients enrolled in the study was 8.29 years for unilateral UDT and 7.97 years in bilateral UDT and it was comparable. The study groups were further subdivided into two age-wise subgroups school goers (5–8 years) and prepubertal (9–12 years). The values of inh B, FSH, and inh B/FSH ratios as well as mean testicular volume were comparable between both groups and subgroups. Overall mean testicular volume had a positive correlation with FSH, inh B, and inh B/FSH, but statistical significance was reached only for inh B (P hypoechogenicity within the testis, all remaining testes were of homogenous echotexture with no instances of irregular echogenicity or tumor. Children with RI >0.6 were separately studied. The incidence of high RI (>0.6) was also comparable in unilateral or bilateral disease. These subjects had unfavorable biochemical parameters in terms of low inh B levels and high FSH levels. Conclusions: Our findings hint to the fact that palpable UDT forms a homogenous group, whether unilateral or bilateral, whereas impalpable testes may form a separate category and need further studies to substantiate this hypothesis. PMID:28082768

  16. Rotating and positive-displacement pumps for low-thrust rocket engines. Volume 2: Fabrication and testing

    Science.gov (United States)

    Csomor, A.

    1974-01-01

    Rotating and positive displacement pumps of various types were studied for pumping liquid fluorine for low thrust high performance rocket engines. Included in the analysis were: centrifugal, pitot, Barske, Tesla, drag, gear, vane, axial piston, radial piston, diaphragm and helirotor pump concepts. The centrifugal and gear pumps were carried through detail design and fabrication. After preliminary testing in Freon 12, the centrifugal pump was selected for further testing and development. It was tested in Freon 12 to obtain the hydrodynamic performance. Tests were also conducted in liquid fluorine to demonstrate chemical compatibility.

  17. Testing geopressured geothermal reservoirs in existing wells. Final report P. R. Girouard Well No. 1, Lafayette Parish, Louisiana. Volume I. Completion and testing

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The P.R. Girouard No. 1 Well, located approximately 10 miles southeast of Lafayette, Louisiana, was the fourth successful test of a geopressured-geothermal aquifer under the Wells of Opportunity program. The well was tested through 3-1/2 inch tubing set on a packer at 14,570 feet without major problems. The geological section tested was the Oligocene Marginulina Texana No. 1 sand of upper Frio age. The interval tested was from 14,744 to 14,819 feet. Produced water was piped down a disposal well perforated from 2870 to 3000 feet in a Miocene saltwater sand. Four flow tests were conducted for sustained production rates of approximately 4000 BWPD to approximately 15,000 BWPD. The highest achieved, during a fifth short test, was 18,460 BWPD. The test equipment was capable of handling higher rates. The gas-to-water ratio was relatively uniform at approximately 40 SCF/bbl. The heating value of the gas is 970 Btu/SCF. The reservoir tests show that is is doubtful that this well would sustain production rates over 10,000 BWPD for any lengthy period from the sand zone in which it was completed. This limited flow capacity is due to the well's poor location in the reservoir and is not a result of any production deficiencies of the Marginulina Texana sand.

  18. Testing geopressured geothermal reservoirs in existing wells. Saldana well No. 2, Zapata County, Texas. Volume I. Completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-07

    The Saldana Well No. 2, approximately 35 miles Southeast of the city of Laredo, Texas, was the sixth successful test of a geopressured-geothermal aquifer under the DOE Wells of Opportunity Program. The well was tested through the annulus between 7-inch casing and 2-3/8 inch tubing. The interval tested was from 9745 to 9820 feet. The geological section was the 1st Hinnant Sand, an upper member of the Wilcox Group. Produced water was injected into the Saldana Well No. 1, which was also acquired from Riddle Oil Company and converted to a disposal well. A Miocene salt water sand was perforated from 3005 to 3100 feet for disposal. One pressure drawdown flow test and one pressure buildup test were conducted during a 10-day period. A total of 9328 barrels of water was produced. The highest sustained flow rate was 1950 BWPD.

  19. Young child with severe brain volume loss easily passes the word memory test and medical symptom validity test: implications for mild TBI.

    Science.gov (United States)

    Carone, Dominic A

    2014-01-01

    The Word Memory Test (WMT) and Medical Symptom Validity Test (MSVT) are two commonly used free-standing measures of test-taking effort. The use of any test as a measure of effort is enhanced when evidence shows that it can be easily passed by patients with severe neurological conditions. The opportunity arose to administer the WMT and MSVT to a 9-year-old girl (referred to as CJ) with severe congenital bilateral brain tissue loss (shown via a compelling brain MRI image), chronic epilepsy, an extremely low Full Scale IQ, extremely low adaptive functioning, developmental delays, numerous severe cognitive impairments, and treatment with multiple high-dose benzodiazepines. She received extensive early intervention services and numerous academic accommodations. Despite this set of problems, CJ passed the WMT and MSVT at perfect to near perfect levels. Implications for failure on these tests among patients with known or alleged mild traumatic brain injury are discussed.

  20. Measurement of volume change in cementitious materials at early ages - Review of testing protocols and interpretation of results

    DEFF Research Database (Denmark)

    Sant, Gaurav; Lura, Pietro; Weiss, Jason

    2006-01-01

    measurement in a rigid mold, and the ASTM C 157 standard. The results of the autogenous and chemical shrinkage tests are compared with one another to describe fully early-age length change. It is shown that through careful experimentation and interpretation, the results of these tests can be completely...

  1. Second generation pressurized fluidized-bed combustion (PFBC) research and development, Phase 2 --- Task 4, carbonizer testing. Volume 2, Data reconciliation

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, R.; Robertson, A.; Vanhook, J.; Goyal, A.; Rehmat, A.; Newby, R.

    1994-11-01

    During the period beginning November 1991 and ending September 1992, a series of tests were conducted at Foster Wheeler Development Corporation in a fluidized-bed coal carbonizer to determine its performance characteristics. The carbonizer was operated for 533 hours in a jetting fluidized-bed configuration during which 36 set points (steady-state periods) were achieved. Extensive data were collected on the feed and product stream compositions, heating values, temperatures, and flow rates. With these data, elemental and energy balances were computed to evaluate and confirm accuracy of the data. The carbonizer data were not as self-consistent as could be desired (balance closure imperfection). A software package developed by Science Ventures, Inc., of California, called BALAID, was used to reconcile the carbonizer data; the details of the reconciliation have been given in Volume 1 of this report. The reconciled data for the carbonizer were rigorously analyzed, correlations were developed, and the model was updated accordingly. The model was then used in simulating each of the 36 steady-state periods achieved in the pilot plant. The details are given in this Volume one. This Volume 2 provides details of the carbonizer data reconciliation.

  2. Analysis, design, fabrication and testing of the mini-Brayton rotating unit (Mini-BRU). Volume 1: Text and tables

    Science.gov (United States)

    Dobler, F. X.

    1978-01-01

    A 500 to 2100 watt power output Mini-Brayton Rotating Unit (Mini-BRU)was analyzed, designed, fabricated and tested. Performance and test data for the various components is included. Components tested include the 2.12 in. diameter compressor, the 2.86 in. diameter turbine, the Rice alternator and the cantilevered foil-type journal and thrust bearings. Also included are results on the fabrication of a C-103 turbine plenum/nozzle assembly and on offgassing of the organic materials in the alternator stator.

  3. Passive Nosetip Technology (PANT) Program. Volume XI. Analysis and Review of the ABRES Combustion Test Facility for High Pressure Hyperthermal Reentry Nosetip Systems Tests

    Science.gov (United States)

    1974-04-01

    the ABRES test stream assuming equilibrium/diffusion controlled heterogenous reactions. The equilibrium test stream properties were input into the...ablation data input into CMA were generated with the ACE computer code assuming equilibrium/diffusion control - led ablation. No chemical kinetics were...tangency and conic surface body points exhibit good agreement with flight ablation temperatures. The pzedicted graphite ablation temperaturas in H/F in

  4. Thermal and fluid mixing in a 1/2-scale test facility. Volume 1. Facility and test design report. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dolan, F.X.; Valenzuela, J.A.

    1985-07-01

    This report describes the test facility and program designed to measure fluid mixing and heat transfer in a 1/2-scale model of the cold leg downcomer and lower plenum of a pressurized water reactor under conditions of interest to the issue of pressurized thermal shock. Several cold leg assemblies are modeled and the downcomer arrangement can be altered to match vendor-specific configurations. The facility can be operated to model flow rates based on Froude number of the injected flow in the cold leg and with steady or transient inlet boundary conditions. Extensive instrumentation is provided to measure flow rates, temperatures and pressure at the facility boundaries and for detailed measurements of temperature, velocity and heat transfer data in the cold leg and downcomer models. The test data are monitored and recorded by a computer data acquisition system that is also used for post-test data reduction and plotting. The planned test matrix includes 75 tests with variations in cold leg and downcomer geometries, loop and HPI flow rates, cold leg Froude number and loop to HPI density difference. Test results will be reported in a series of quick look and final report.

  5. Continuous emission monitoring for industrial boilers, General Motors Corporation, Assembly Division, St. Louis, Missouri. Volume I. System configuration and results of the operational test period. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Huckabee, D.; Diamond, S.; Porter, T.; McGlew, P.

    1980-06-01

    The objective of this program was to continuously monitor sulfur dioxide (SO/sub 2/) removal efficiencies of a flue gas desulfurization (FGD) system installed an industrial boiler for 30 days. The data will be used to substantiate the applicability of extractive monitors to industrial boilers and to aid in formulating New Source Performance Standards (NSPS) for industrial boilers. The monitoring program was conducted at the General Motors Corporation, Assembly Division, located in St. Louis, Missouri, during the period of December 27, 1979 through March 8, 1980. Sulfur dioxide (SO/sub 2/) and oxygen (O/sub 2/) concentrations were measured on a dry basis concurrently at both the inlet and outlet of the FGD system controlling the exhaust from one coal-fired boiler. Before commencing the monitoring program the analyzers were subjected to draft Performance Specification Tests (PST) delineated in 40 CFR 60 Appendix B, PST 2 and 3 proposed revisions, October 10, 1979. Throughout the 30-day program, abbreviated accuracy tests were conducted for both SO/sub 2/ and O/sub 2/ monitors and complete accuracy tests were conducted at the conclusion of the program. During the 30-day program, three simultaneous Method 5 particulate tests were conducted at the scrubber inlet and outlet. Component failure and electrical problems delayed the start date for monitoring from January 1, 1980 until February 3, 1980. Once these problems were rectified, the conditioning period was completed and the 30 days of data collection was begun. The report is contained in three volumes. Volume I is a compilation of the following: description of the combustion unit; description of the FGD system; description of monitoring data and process data acquisition, and data reduction; description of the monitoring program; description of the PSTs; results and conclusion of the PST and particulate tests; and quality assurance procedures.

  6. Field test of two high-pressure direct-contact downhole steam generators. Volume II. Oxygen/diesel system

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, J.B.

    1983-07-01

    A field test of an oxygen/diesel fuel, direct contact steam generator has been completed. The field test, which was a part of Project DEEP STEAM and was sponsored by the US Department of Energy, involved the thermal stimulation of a well pattern in the Tar Zone of the Wilmington Oil Field. The activity was carried out in cooperation with the City of Long Beach and the Long Beach Oil Development Company. The steam generator was operated at ground level, with the steam and combustion products delivered to the reservoir through 2022 feet of calcium-silicate insulated tubing. The objectives of the test included demonstrations of safety, operational ease, reliability and lifetime; investigations of reservoir response, environmental impact, and economics; and comparison of those points with a second generator that used air rather than oxygen. The test was extensively instrumented to provide the required data. Excluding interruptions not attributable to the oxygen/diesel system, steam was injected 78% of the time. System lifetime was limited by the combustor, which required some parts replacement every 2 to 3 weeks. For the conditions of this particular test, the use of trucked-in LOX resulted in liess expense than did the production of the equivalent amount of high pressure air using on site compressors. No statistically significant production change in the eight-acre oxygen system well pattern occurred during the test, nor were any adverse effects on the reservoir character detected. Gas analyses during the field test showed very low levels of SOX (less than or equal to 1 ppM) in the generator gaseous effluent. The SOX and NOX data did not permit any conclusion to be drawn regarding reservoir scrubbing. Appreciable levels of CO (less than or equal to 5%) were measured at the generator, and in this case produced-gas analyses showed evidence of significant gas scrubbing. 64 figures, 10 tables.

  7. Summary and assessment of METC zinc ferrite hot coal gas desulfurization test program, final report: Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Underkoffler, V.S.

    1986-12-01

    The Morgantown Energy Technology Center (METC) has conducted a test program to develop a zinc ferrite-based high temperature desulfurization process which could be applied to fuel gas entering downstream components such as molten carbonate fuel cells or gas turbines. As a result of prior METC work with iron oxide and zinc oxide sorbents, zinc ferrite evolved as a candidate with the potential for high capacity, low equilibrium levels of H/sub 2/S, and structural stability after multiple regenerations. The program consisted of laboratory-scale testing with a two-inch diameter reactor and simulated fixed-bed gasifier gas; bench-scale testing with a six-inch diameter reactor and actual gas from the METC 42-inch fixed bed gasifier; as well as laboratory-scale testing of zinc ferrite with simulated fluidized bed gasifier gas. Optimum operating parameters for zinc ferrite such as temperatures, gas compositions, and space velocities are discussed. From the test results, salient features of zinc ferrite were derived and discussed in regard to system implications, issues raised, and technical requirements. 47 refs., 53 figs., 41 tabs.

  8. Geopressured-Geothermal Drilling and Testing Plan, Volume II, Testing Plan; Dow Chemical Co. - Dept. of Energy Dow-DOE Sweezy No. 1 Well, Vermilion Parish, Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-02-01

    The Dow/D.O.E. L. R. Sweezy No. 1 geopressured geothermal production well was completed in August of 1981. The well was perforated and gravel packed in approximately 50 feet of sand from 13,344 feet to 13,395 feet. Permeabilities of 6 to 914 millidarcies were measured with porosity of 25 to 36%. Static surface pressure after well clean-up was 5000 psi. At 1000 B/D flow rate the drawdown was 50 psi. The water produced in clean-up contained 100,000 ppm TDS. This report details the plan for testing this well with the goal of obtaining sufficient data to define the total production curve of the small, 939 acre, reservoir. A production time of six to nine months is anticipated. The salt water disposal well is expected to be completed and surface equipment installed such that production testing will begin by April 1, 1982. The program should be finished and reports written by February 28, 1983. The brine will be produced from the No.1 well, passed through a separator where the gas is removed, then reinjected into the No.2 (SWD) well under separator pressure. Flow rates of up to 25,000 B/D are expected. The tests are divided into a two-week short-term test and six to nine-month long-term tests with periodic downhole measurement of drawdown and buildup rates. Data obtained in the testing will be relayed by phoneline computer hookup to Otis Engineering in Dallas, Texas, where the reservoir calculations and modeling will be done. At the point where sufficient data has been obtained to reach the objectives of the program, production will be ended, the wells plugged and abandoned, and a final report will be issued.

  9. SRM Internal Flow Tests and Computational Fluid Dynamic Analysis. Volume 4; Cold Flow Analyses and CFD Analysis Capability Development

    Science.gov (United States)

    1995-01-01

    An evaluation of the effect of model inlet air temperature drift during a test run was performed to aid in the decision on the need for and/or the schedule for including heaters in the SRMAFTE. The Sverdrup acceptance test data was used to determine the drift in air temperature during runs over the entire range of delivered flow rates and pressures. The effect of this temperature drift on the model Reynolds number was also calculated. It was concluded from this study that a 2% change in absolute temperature during a test run could be adequately accounted for by the data analysis program. A handout package of these results was prepared and presented to ED35 management.

  10. C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 2: Test Bed Performance Evaluation and Final AeroMACS Recommendations

    Science.gov (United States)

    Hall, Edward; Magner, James

    2011-01-01

    This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II (this document) describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

  11. Performance Evaluation of Advanced Retrofit Roof Technologies Using Field-Test Data Phase Three Final Report, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Kaushik [ORNL; Childs, Phillip W [ORNL; Atchley, Jerald Allen [ORNL

    2014-05-01

    This article presents various metal roof configurations that were tested at Oak Ridge National Laboratory in Tennessee, U.S.A. between 2009 and 2013, and describes their potential for reducing the attic-generated space conditioning loads. These roofs contained different combinations of phase change material, rigid insulation, low emittance surface and above-sheathing ventilation, with standing-seam metal panels on top. These roofs were designed to be installed on existing roofs decks, or on top of asphalt shingles for retrofit construction. All the tested roofs showed the potential for substantial energy savings compared to an asphalt shingle roof, which was used as a control for comparison. The roofs were constructed on a series of adjacent attics separated at the gables using thick foam insulation. The attics were built on top of a conditioned room. All attics were vented at the soffit and ridge. The test roofs and attics were instrumented with an array of thermocouples. Heat flux transducers were installed in the roof deck and attic floor (ceiling) to measure the heat flows through the roof and between the attic and conditioned space below. Temperature and heat flux data were collected during the heating, cooling and swing seasons over a 3 year period. Data from previous years of testing have been published. Here, data from the latest roof configurations being tested in year 3 of the project are presented. All test roofs were highly effective in reducing the heat flows through the roof and ceiling, and in reducing the diurnal attic temperature fluctuations.

  12. A Historical Evaluation of the U12t Tunnel, Nevada Test Site, Nye County, Nevada, Volume 5 of 6

    Energy Technology Data Exchange (ETDEWEB)

    Harold Drollinger; Robert C. Jones; and Thomas F. Bullard; Desert Research Institute, Laurence J. Ashbaugh, Southern Nevada Courier Service and Wayne R. Griffin, Stoller-Navarro Joint Venture

    2009-02-01

    This report presents a historical evaluation of the U12t Tunnel on the Nevada Test Site in southern Nevada. The work was conducted by the Desert Research Institute at the request of the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office and the U.S. Department of Defense, Defense Threat Reduction Agency (DTRA). The U12t Tunnel is one of a series of tunnels used for underground nuclear weapons effects tests on the east side of Rainier and Aqueduct Mesas. Six nuclear weapons effects tests, Mint Leaf, Diamond Sculls, Husky Pup, Midas Myth/Milagro, Mighty Oak, and Mission Ghost, and one high explosive test, SPLAT, were conducted within the U12t Tunnel from 1970 to 1987. All six of the nuclear weapons effects tests and the high explosive test were sponsored by DTRA. Two conventional weapons experiments, Dipole Knight and Divine Eagle, were conducted in the tunnel portal area in 1997 and 1998. These experiments were sponsored by the Defense Special Weapons Agency. The U12t Tunnel complex is composed of the Portal and Mesa Areas and includes an underground tunnel with a main access drift and nine primary drifts, a substantial tailings pile fronting the tunnel portal, a series of discharge ponds downslope of the tailings pile, and two instrumentation trailer parks and 16 drill holes on top of Aqueduct Mesa. A total of 89 cultural features were recorded: 54 at the portal and 35 on the mesa. In the Portal Area, cultural features are mostly concrete pads and building foundations; other features include the portal, rail lines, the camel back, ventilation and cooling system components, communication equipment, and electrical equipment. On the mesa are drill holes, a few concrete pads, a loading ramp, and electrical equipment.

  13. A Historical Evaluation of the U12t Tunnel, Nevada Test Site, Nye County, Nevada, Volume 2 of 6

    Energy Technology Data Exchange (ETDEWEB)

    Harold Drollinger; Robert C. Jones; and Thomas F. Bullard; Desert Research Institute, Laurence J. Ashbaugh, Southern Nevada Courier Service and Wayne R. Griffin, Stoller-Navarro Joint Venture

    2009-02-01

    This report presents a historical evaluation of the U12t Tunnel on the Nevada Test Site in southern Nevada. The work was conducted by the Desert Research Institute at the request of the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office and the U.S. Department of Defense, Defense Threat Reduction Agency (DTRA). The U12t Tunnel is one of a series of tunnels used for underground nuclear weapons effects tests on the east side of Rainier and Aqueduct Mesas. Six nuclear weapons effects tests, Mint Leaf, Diamond Sculls, Husky Pup, Midas Myth/Milagro, Mighty Oak, and Mission Ghost, and one high explosive test, SPLAT, were conducted within the U12t Tunnel from 1970 to 1987. All six of the nuclear weapons effects tests and the high explosive test were sponsored by DTRA. Two conventional weapons experiments, Dipole Knight and Divine Eagle, were conducted in the tunnel portal area in 1997 and 1998. These experiments were sponsored by the Defense Special Weapons Agency. The U12t Tunnel complex is composed of the Portal and Mesa Areas and includes an underground tunnel with a main access drift and nine primary drifts, a substantial tailings pile fronting the tunnel portal, a series of discharge ponds downslope of the tailings pile, and two instrumentation trailer parks and 16 drill holes on top of Aqueduct Mesa. A total of 89 cultural features were recorded: 54 at the portal and 35 on the mesa. In the Portal Area, cultural features are mostly concrete pads and building foundations; other features include the portal, rail lines, the camel back, ventilation and cooling system components, communication equipment, and electrical equipment. On the mesa are drill holes, a few concrete pads, a loading ramp, and electrical equipment.

  14. A Historical Evaluation of the U12t Tunnel, Nevada Test Site, Nye County, Nevada, Volume 1 of 6

    Energy Technology Data Exchange (ETDEWEB)

    Drollinger, Harold [Desert Research Institute (DRI), Nevada System of Higher Education, Reno,NV (United States); Jones, Robert C. [Desert Research Institute (DRI), Nevada System of Higher Education, Reno,NV (United States); Bullard, Thomas F. [Desert Research Institute (DRI), Nevada System of Higher Education, Reno,NV (United States); Ashbaugh, Laurence J. [Southern Nevada Courier Service, NV (United States); Griffin, Wayne R. [Stoller-Navarro Joint Venture, Las Vegas, NV (United States)

    2009-02-01

    This report presents a historical evaluation of the U12t Tunnel on the Nevada Test Site in southern Nevada. The work was conducted by the Desert Research Institute at the request of the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office and the U.S. Department of Defense, Defense Threat Reduction Agency (DTRA). The U12t Tunnel is one of a series of tunnels used for underground nuclear weapons effects tests on the east side of Rainier and Aqueduct Mesas. Six nuclear weapons effects tests, Mint Leaf, Diamond Sculls, Husky Pup, Midas Myth/Milagro, Mighty Oak, and Mission Ghost, and one high explosive test, SPLAT, were conducted within the U12t Tunnel from 1970 to 1987. All six of the nuclear weapons effects tests and the high explosive test were sponsored by DTRA. Two conventional weapons experiments, Dipole Knight and Divine Eagle, were conducted in the tunnel portal area in 1997 and 1998. These experiments were sponsored by the Defense Special Weapons Agency. The U12t Tunnel complex is composed of the Portal and Mesa Areas and includes an underground tunnel with a main access drift and nine primary drifts, a substantial tailings pile fronting the tunnel portal, a series of discharge ponds downslope of the tailings pile, and two instrumentation trailer parks and 16 drill holes on top of Aqueduct Mesa. A total of 89 cultural features were recorded: 54 at the portal and 35 on the mesa. In the Portal Area, cultural features are mostly concrete pads and building foundations; other features include the portal, rail lines, the camel back, ventilation and cooling system components, communication equipment, and electrical equipment. On the mesa are drill holes, a few concrete pads, a loading ramp, and electrical equipment.

  15. A Historical Evaluation of the U12t Tunnel, Nevada Test Site, Nye County, Nevada, Volume 6 of 6

    Energy Technology Data Exchange (ETDEWEB)

    Harold Drollinger; Robert C. Jones; and Thomas F. Bullard; Desert Research Institute, Laurence J. Ashbaugh, Southern Nevada Courier Service and Wayne R. Griffin, Stoller-Navarro Joint Venture

    2009-02-01

    This report presents a historical evaluation of the U12t Tunnel on the Nevada Test Site in southern Nevada. The work was conducted by the Desert Research Institute at the request of the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office and the U.S. Department of Defense, Defense Threat Reduction Agency (DTRA). The U12t Tunnel is one of a series of tunnels used for underground nuclear weapons effects tests on the east side of Rainier and Aqueduct Mesas. Six nuclear weapons effects tests, Mint Leaf, Diamond Sculls, Husky Pup, Midas Myth/Milagro, Mighty Oak, and Mission Ghost, and one high explosive test, SPLAT, were conducted within the U12t Tunnel from 1970 to 1987. All six of the nuclear weapons effects tests and the high explosive test were sponsored by DTRA. Two conventional weapons experiments, Dipole Knight and Divine Eagle, were conducted in the tunnel portal area in 1997 and 1998. These experiments were sponsored by the Defense Special Weapons Agency. The U12t Tunnel complex is composed of the Portal and Mesa Areas and includes an underground tunnel with a main access drift and nine primary drifts, a substantial tailings pile fronting the tunnel portal, a series of discharge ponds downslope of the tailings pile, and two instrumentation trailer parks and 16 drill holes on top of Aqueduct Mesa. A total of 89 cultural features were recorded: 54 at the portal and 35 on the mesa. In the Portal Area, cultural features are mostly concrete pads and building foundations; other features include the portal, rail lines, the camel back, ventilation and cooling system components, communication equipment, and electrical equipment. On the mesa are drill holes, a few concrete pads, a loading ramp, and electrical equipment.

  16. A Historical Evaluation of the U12t Tunnel, Nevada Test Site, Nye County, Nevada, Volume 3 of 6

    Energy Technology Data Exchange (ETDEWEB)

    Harold Drollinger; Robert C. Jones; and Thomas F. Bullard; Desert Research Institute, Laurence J. Ashbaugh, Southern Nevada Courier Service and Wayne R. Griffin, Stoller-Navarro Joint Venture

    2009-02-01

    This report presents a historical evaluation of the U12t Tunnel on the Nevada Test Site in southern Nevada. The work was conducted by the Desert Research Institute at the request of the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office and the U.S. Department of Defense, Defense Threat Reduction Agency (DTRA). The U12t Tunnel is one of a series of tunnels used for underground nuclear weapons effects tests on the east side of Rainier and Aqueduct Mesas. Six nuclear weapons effects tests, Mint Leaf, Diamond Sculls, Husky Pup, Midas Myth/Milagro, Mighty Oak, and Mission Ghost, and one high explosive test, SPLAT, were conducted within the U12t Tunnel from 1970 to 1987. All six of the nuclear weapons effects tests and the high explosive test were sponsored by DTRA. Two conventional weapons experiments, Dipole Knight and Divine Eagle, were conducted in the tunnel portal area in 1997 and 1998. These experiments were sponsored by the Defense Special Weapons Agency. The U12t Tunnel complex is composed of the Portal and Mesa Areas and includes an underground tunnel with a main access drift and nine primary drifts, a substantial tailings pile fronting the tunnel portal, a series of discharge ponds downslope of the tailings pile, and two instrumentation trailer parks and 16 drill holes on top of Aqueduct Mesa. A total of 89 cultural features were recorded: 54 at the portal and 35 on the mesa. In the Portal Area, cultural features are mostly concrete pads and building foundations; other features include the portal, rail lines, the camel back, ventilation and cooling system components, communication equipment, and electrical equipment. On the mesa are drill holes, a few concrete pads, a loading ramp, and electrical equipment.

  17. Measurement of volume change in cementitious materials at early ages - Review of testing protocols and interpretation of results

    DEFF Research Database (Denmark)

    Sant, Gaurav; Lura, Pietro; Weiss, Jason

    2006-01-01

    Early-age cracking in concrete bridge decks, pavements, and superstructure elements has served as the impetus for substantial research on early-age shrinkage in cementitious materials. Much of this research has indicated how mixture proportions, constituent materials, and construction operations...... measurement in a rigid mold, and the ASTM C 157 standard. The results of the autogenous and chemical shrinkage tests are compared with one another to describe fully early-age length change. It is shown that through careful experimentation and interpretation, the results of these tests can be completely...

  18. Design, Construction and Performance Tests of a Prototype MicroMegas Chamber with Two Readout Planes in a Common Gas Volume

    CERN Document Server

    Brickwedde, Bernard; Schott, Matthias; Yildirim, Eda

    2016-01-01

    In this paper, the design and the performance of a prototype detector based on MicroMegas technology with two detection planes in a common gas volume is discussed. The detector is suited for the forward region of LHC detectors, addressing the high-rate environment and limited available space. Each detection plane has an active area of 9x9 cm^2 with a two-dimensional strip readout and is separated by a common gas region with a height of 14 mm. A micro-mesh, working as a cathode, is placed in the middle of the common gas volume separating it into two individual cells. This setup allows for an angle reconstruction of incoming particles with a precision of 2 mrad. Since this design reduces the impact of multiple scattering effects by the reduced material budget, possible applications for low energy beam experiments can be envisioned. The performance of the prototype detector has been tested with a 4.4 GeV electron beam, provided by the test beam facility at DESY.

  19. 77 FR 28340 - Revocation of TSCA Section 4 Testing Requirements for One High Production Volume Chemical Substance

    Science.gov (United States)

    2012-05-14

    ... acute toxicity, bacterial reverse mutation, and chromosomal damage for C.I. Pigment Blue 61 by removing...]phenyl]amino]- (CAS No. 1324-76-1), also known as C.I. Pigment Blue 61. EPA is basing its decision to... amendment revokes some of the testing requirements for C.I. Pigment Blue 61. EPA is basing its decision...

  20. 78 FR 27860 - Revocation of TSCA Section 4 Testing Requirements for One High Production Volume Chemical Substance

    Science.gov (United States)

    2013-05-13

    ... toxicity, mammalian acute toxicity, bacterial reverse mutation, and chromosomal damage for C.I. Pigment...), also known as C.I. Pigment Blue 61. After publication in the Federal Register of a final rule requiring testing for C.I. Pigment Blue 61, EPA received adequate, existing studies which eliminated the need...

  1. Cost Analysis for Aircraft System Test and Evaluation: Empirical Survey Data Structuring and Parametric Modeling. Volume 2.

    Science.gov (United States)

    1987-03-01

    the B-52 prototypes flight test and mockup hours. Other KC-135 data include other block 1 data, i.e., maintenance trainers, support equipment, static...DE w. \\,i 177 Frequency Hi stogramn r 2 4 ~ ... . . .. . e n 0*i / 0 20 40 60 80 100 wep DIVIDE wavi 178 Frequencw Histogram 6 Isvo I. I I S J J a I I

  2. Development and Initial Testing of Instrumentation To Measure Five Functions of Schooling. Final Report. Volume I--Summary Report.

    Science.gov (United States)

    Northwest Regional Educational Lab., Portland, OR.

    The development and testing of an instrument used to measure the five major societal functions of schooling are described. These functions, as defined by William Spady, include: custody or control over students, course selection, student evaluation and certification, instructional processes, and socialization. The following sequence of events took…

  3. Lowering bronchoaspiration rate in an acute stroke unit by means of a 2 volume/3 texture dysphagia screening test with pulsioximetry.

    Science.gov (United States)

    Cocho, D; Sagales, M; Cobo, M; Homs, I; Serra, J; Pou, M; Perez, G; Pujol, G; Tantinya, S; Bao, P; Aloy, A; Sabater, R; Gendre, J; Otermin, P

    During acute stroke, 30% of all patients present dysphagia and 50% of that subgroup will experience bronchoaspiration. Our aim was to compare mortality and bronchoaspiration rates associated with the water test compared to those associated with a 2 volume/3 texture test controlled with pulse oximetry (2v/3t-P test) in our stroke unit. Over a 5-year period, we performed a prospective analysis of all consecutive acute ischaemic stroke patients hospitalised in the Stroke Unit. Dysphagia was evaluated using the water test between 2008 and 2010 (group 0 or G0), and the 2v/3t-P test (group 1 or G1) between 2011 and 2012. We analysed demographic data, vascular risk factors, neurological deficit on the NIHSS, aetiological subtype according to TOAST criteria, clinical subtype according to the Oxfordshire classification, prevalence of dysphagia, percentage of patients with bronchoaspiration, and mortality. We examined 418 patients with acute stroke (G0=275, G1=143). There were significant differences between the 2 groups regarding the percentage of patients with TACI (17% in G0 vs. 29% in G1, P=.005) and median NIHSS score (4 points in G0 vs. 7 points in G1, P=.003). Since adopting the new swallowing test, we detected a non-significant increase in the percentage of dysphagia (22% in G0 vs. 25% in G1, P=.4), lower mortality (1.7% in G0 vs. 0.7% in G1, P=.3) and a significant decrease in the bronchoaspiration rate (6.2% in G0 vs. 2.1% in G1, P=.05). Compared to the water test used for dysphagia screening, the new 2v/3t-P test lowered bronchoaspiration rates in acute stroke patients. Copyright © 2014 Sociedad Española de Neurología. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. Cyclical tests of selected space shuttle TPS metallic materials in a plasma arc tunnel Volume 1: Description of tests and program summary

    Science.gov (United States)

    Rinehart, W. A.; Land, D. W.; Painter, J. H.; Williamson, R. A.

    1972-01-01

    Work, concerned with cyclical thermal evaluation of selected space shuttle thermal protection system (TPS) metallic materials in a hypervelocity oxidizing atmosphere that approximated an actual entry environment, is presented. A total of 325 sample test hours were conducted on 21 super-alloy metallic samples at temperatures from 1800 to 2200 F (1256 to 1478 K) without any failures. The 4 x 4 in. (10.2 x 10.2 cm) samples were fabricated from five nickel base alloys and one cobalt base alloy. Eighteen of the samples were cycled 100 times each and the other three samples 50 times each in a test stream emanating from an 8 in. (20.3 cm) diam exit, Mach 4.6, conical nozzle. The test cycle consisted of a 10 min heat pulse to a controlled temperature followed by a 10 min cooldown period. The TD-NiCrAl and TD-NiAlY materials showed the least change in weight, thickness, and physical appearance even though they were subjected to the highest temperature environment.

  5. Thermal and fluid mixing in a 1/2-scale test facility. Volume 2. Data report. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dolan, F.X.; Valenzuela, J.A.

    1985-07-01

    This report presents data from an experimental study of fluid mixing in a 1/2-scale model of the cold leg, downcomer, lower plenum, pump simulator, and loop seal typical of a Westinghouse Pressurized Water Reactor. The tests were transient cooldown tests in that they simulated an extreme condition of Small Break Loss of Coolant Accident (SBLOCA) during which cold High Pressure Injection (HPI) fluid is injected into stagnant, hot primary fluid with complete loss of natural circulation in the loop. Extensive temperature, velocity, and heat transfer coefficient data are presented at two cold leg Froude numbers: 0.052 and 0.076. The 1/2-scale data are compared with earlier data from a 1/5-scale, geometrically similar facility to assess scaling principles.

  6. Joint DoD/DoE Shale Oil Project. Volume 3. Testing of Refined Shale Oil Fuels.

    Science.gov (United States)

    1983-12-01

    10-9. GROWTH RATINGS OF CLADOSPORIUM RESINAE AT VARIOUS INCUBATION STAGES ......................... 10-25 S 0 xv - LIST OF TABLES (Continued) TABLE 10...both shale DFM and shale JP-5 support heavy growth of Cladosporium resinae . Short-term engine performance tests were conducted on two gas turbine...microbiological growth of shale DFM and shale JP-5 was investigated by inoculating a mixture of fuel and 0 nutrient medium with Cladosporium resinae

  7. Characteristics of Optical Fire Detector False Alarm Sources and Qualification Test Procedures to Prove Immunity. Phase 2. Volume 1

    Science.gov (United States)

    1993-09-01

    Features of Typical Lightning Flashes 95 xii LIST OF FIGURES (CONCLUDED) FIGURE TITLE PAGE 32 Examples of Spectral Energy Distribution of 98 Various...Yel IR..IR IR Eastern Electric 3 N/A N/A SB-1O1W 4 N/A N/A 21 UV Bug Lamp 3 0 0O 145 Tabla 29 (Continued)[SOURCE TEST OISTANC CHOP0 NO. SOURCE NO

  8. Design, ancillary testing, analysis and fabrication data for the advanced composite stabilizer for Boeing 737 aircraft. Volume 1: Technical summary

    Science.gov (United States)

    Aniversario, R. B.; Harvey, S. T.; Mccarty, J. E.; Parsons, J. T.; Peterson, D. C.; Pritchett, L. D.; Wilson, D. R.; Wogulis, E. R.

    1983-01-01

    The horizontal stabilizer of the 737 transport was redesigned. Five shipsets were fabricated using composite materials. Weight reduction greater than the 20% goal was achieved. Parts and assemblies were readily produced on production-type tooling. Quality assurance methods were demonstrated. Repair methods were developed and demonstrated. Strength and stiffness analytical methods were substantiated by comparison with test results. Cost data was accumulated in a semiproduction environment. FAA certification was obtained.

  9. Recovery Efficiency Test Project: Phase 1, Activity report. Volume 1: Site selection, drill plan preparation, drilling, logging, and coring operations

    Energy Technology Data Exchange (ETDEWEB)

    Overbey, W.K. Jr.; Carden, R.S.; Kirr, J.N.

    1987-04-01

    The recovery Efficiency Test well project addressed a number of technical issues. The primary objective was to determine the increased efficiency gas recovery of a long horizontal wellbore over that of a vertical wellbore and, more specifically, what improvements can be expected from inducing multiple hydraulic fractures from such a wellbore. BDM corporation located, planned, and drilled a long radius turn horizontal well in the Devonian shale Lower Huron section in Wayne County, West Virginia, demonstrating that state-of-the-art technology is capable of drilling such wells. BDM successfully tested drilling, coring, and logging in a horizontal well using air as the circulating medium; conducted reservoir modeling studies to protect flow rates and reserves in advance of drilling operations; observed two phase flow conditions in the wellbore not observed previously; cored a fracture zone which produced gas; observed that fractures in the core and the wellbore were not systematically spaced (varied from 5 to 68 feet in different parts of the wellbore); observed that highest gas show rates reported by the mud logger corresponded to zone with lowest fracture spacing (five feet) or high fracture frequency. Four and one-half inch casting was successfully installed in the borehole and was equipped to isolate the horizontal section into eight (8) zones for future testing and stimulation operations. 6 refs., 48 figs., 10 tabs.

  10. AGARD Flight Test Techniques Series. Volume 14. Introduction to Flight Test Engineering (Introduction a la Technique d’essais en vol)

    Science.gov (United States)

    1995-09-01

    W.B. Clarks, 1897. Gast, R. de, "Pax River: the Naval Air Test Center", US Naval Institute Proceedings, Dec. 1969. Gibbs -Smith, C.H., "The Aeroplane...An Historical Survey of Its Origin and Development", London, HMSO, 1960. Gibbs -Smith, C.H., "The Invention of the Aeroplane 1799-1909", New York...145302. 16-6. Dobrzynski, W., "The Effect of Ground Reflections on the Propeller Aircraft Noise Measures LAmax and EPNL", Paper 8th Symposium FASE 󈨝

  11. Deoxygenation and the blood volume signals in the flexor carpi ulnaris and radialis muscles obtained during the execution of the Mirallas's test of judo athletes

    Science.gov (United States)

    Verdaguer-Codina, Joan; Mirallas, Jaume A.

    1996-12-01

    The technique of execution of any movement in Judo is extremely important. The coaches want tests and tools easy to use and cheaper, to evaluate the progress of a judoist in the tatame. In this paper we present a test developed by Mirallas, which has his name 'Test of Mirallas' to evaluate the maximal power capacity of the judoist. The near infrared spectroscopy (NIRS) signals were obtained to have a measurement of the metabolic work of the flexor carpi ulnaris and radialis muscles, during the execution of the ippon-seoi-nage movement, allowing this measurement to assess by NIRS the maximal oxygen uptake. Also obtained were tympanic, skin forehead, and biceps brachii temperatures during the test time and recovery phase to study the effects of ambient conditions and the post-exercise oxygen consumption. The deoxygenation and blood volume signals obtained gave different results, demonstrating the hypothesis of the coaches that some judoist do the execution of the ippon-seoi-nage movement correctly and the rest didn't. The heart rate frequency obtained in the group of judoist was between 190-207 bpm, and in the minute five of post-exercise was 114-137 bpm; the time employed in the MIrallas's test were from 7 feet 14 inches to 13 feet 49 inches, and the total of movements were from 199 to 409. The data obtained in the skin forehead, and skin biceps brachii confirms previous works that the oxygen consumption remains after exercise in the muscle studied. According to the results, the test developed by Mirallas is a good tool to evaluate the performance of judoist any time, giving better results compared with standard tests.

  12. SRM Internal Flow Tests and Computational Fluid Dynamic Analysis. Volume 2; CFD RSRM Full-Scale Analyses

    Science.gov (United States)

    2001-01-01

    This document presents the full-scale analyses of the CFD RSRM. The RSRM model was developed with a 20 second burn time. The following are presented as part of the full-scale analyses: (1) RSRM embedded inclusion analysis; (2) RSRM igniter nozzle design analysis; (3) Nozzle Joint 4 erosion anomaly; (4) RSRM full motor port slag accumulation analysis; (5) RSRM motor analysis of two-phase flow in the aft segment/submerged nozzle region; (6) Completion of 3-D Analysis of the hot air nozzle manifold; (7) Bates Motor distributed combustion test case; and (8) Three Dimensional Polysulfide Bump Analysis.

  13. Development and testing of laser Doppler system components for wake vortex monitoring. Volume 1: Scanner development, laboratory and field testing and system modeling

    Science.gov (United States)

    Wilson, D. J.; Krause, M. C.; Coffey, E. W.; Huang, C. C.; Edwards, B. B.; Shrider, K. R.; Jetton, J. L.; Morrison, L. K.

    1974-01-01

    A servo-controlled range/elevation scanner for the laser Doppler velocimeter (LDV) was developed and tested in the field to assess its performance in detecting and monitoring aircraft trailing vortices in an airport environment. The elevation scanner provides a capability to manually point the LDV telescope at operator chosen angles from 3.2 deg. to 89.6 deg within 0.2 deg, or to automatically scan the units between operator chosen limits at operator chosen rates of 0.1 Hz to 0.5 Hz. The range scanner provides a capability to manually adjust the focal point of the system from a range of 32 meters to a range of 896 meters under operator control, or to scan between operator chosen limits and at rates from 0.1 Hz to 6.9 Hz. The scanner controls are designed to allow simulataneous range and elevation scanning so as to provide finger scan patterns, arc scan patterns, and vertical line scan patterns. The development and testing of the unit is discussed, along with a fluid dynamic model of the wake vortex developed in a laser Doppler vortex sensor simulation program.

  14. Gulf Coast geopressured-geothermal program summary report compilation. Volume 2-B: Resource description, program history, wells tested, university and company based research, site restoration

    Energy Technology Data Exchange (ETDEWEB)

    John, C.J.; Maciasz, G.; Harder, B.J.

    1998-06-01

    The US Department of Energy established a geopressured-geothermal energy program in the mid 1970`s as one response to America`s need to develop alternate energy resources in view of the increasing dependence on imported fossil fuel energy. This program continued for 17 years and approximately two hundred million dollars were expended for various types of research and well testing to thoroughly investigate this alternative energy source. This volume describes the following studies: Design well program; LaFourche Crossing; MG-T/DOE Amoco Fee No. 1 (Sweet Lake); Environmental monitoring at Sweet Lake; Air quality; Water quality; Microseismic monitoring; Subsidence; Dow/DOE L.R. Sweezy No. 1 well; Reservoir testing; Environmental monitoring at Parcperdue; Air monitoring; Water runoff; Groundwater; Microseismic events; Subsidence; Environmental consideration at site; Gladys McCall No. 1 well; Test results of Gladys McCall; Hydrocarbons in production gas and brine; Environmental monitoring at the Gladys McCall site; Pleasant Bayou No. 2 well; Pleasant Bayou hybrid power system; Environmental monitoring at Pleasant Bayou; and Plug abandonment and well site restoration of three geopressured-geothermal test sites. 197 figs., 64 tabs.

  15. Standard guide for measuring the wear volumes of piston ring segments run against flat coupons in reciprocating wear tests

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This guide covers and describes a profiling method for use accurately measuring the wear loss of compound-curved (crowned) piston ring specimens that run against flat counterfaces. It does not assume that the wear scars are ideally flat, as do some alternative measurement methods. Laboratory-scale wear tests have been used to evaluate the wear of materials, coatings, and surface treatments that are candidates for piston rings and cylinder liners in diesel engines or spark ignition engines. Various loads, temperatures, speeds, lubricants, and durations are used for such tests, but some of them use a curved piston ring segment as one sliding partner and a flat or curved specimen (simulating the cylinder liner) as its counterface. The goal of this guide is to provide more accurate wear measurements than alternative approaches involving weight loss or simply measuring the length and width of the wear marks. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its ...

  16. 1995 NASA High-Speed Research Program Sonic Boom Workshop. Volume 2; Configuration Design, Analysis, and Testing

    Science.gov (United States)

    Baize, Daniel G. (Editor)

    1999-01-01

    The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Sonic Boom Workshop on September 12-13, 1995. The workshop was designed to bring together NASAs scientists and engineers and their counterparts in industry, other Government agencies, and academia working together in the sonic boom element of NASAs High-Speed Research Program. Specific objectives of this workshop were to: (1) report the progress and status of research in sonic boom propagation, acceptability, and design; (2) promote and disseminate this technology within the appropriate technical communities; (3) help promote synergy among the scientists working in the Program; and (4) identify technology pacing, the development C, of viable reduced-boom High-Speed Civil Transport concepts. The Workshop was organized in four sessions: Sessions 1 Sonic Boom Propagation (Theoretical); Session 2 Sonic Boom Propagation (Experimental); Session 3 Acceptability Studies-Human and Animal; and Session 4 - Configuration Design, Analysis, and Testing.

  17. Field test of two high-pressure, direct-contact downhole steam generators. Volume I. Air/diesel system

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, B.W.

    1983-05-01

    As a part of the Project DEEP STEAM to develop technology to more efficiently utilize steam for the recovery of heavy oil from deep reservoirs, a field test of a downhole steam generator (DSG) was performed. The DSG burned No. 2 diesel fuel in air and was a direct-contact, high pressure device which mixed the steam with the combustion products and injected the resulting mixture directly into the oil reservoir. The objectives of the test program included demonstration of long-term operation of a DSG, development of operational methods, assessment of the effects of the steam/combustion gases on the reservoir and comparison of this air/diesel DSG with an adjacent oxygen/diesel direct contact generator. Downhole operation of the air/diesel DSG was started in June 1981 and was terminated in late February 1982. During this period two units were placed downhole with the first operating for about 20 days. It was removed, the support systems were slightly modified, and the second one was operated for 106 days. During this latter interval the generator operated for 70% of the time with surface air compressor problems the primary source of the down time. Thermal contact, as evidenced by a temperature increase in the production well casing gases, and an oil production increase were measured in one of the four wells in the air/diesel pattern. Reservoir scrubbing of carbon monoxide was observed, but no conclusive data on scrubbing of SO/sub x/ and NO/sub x/ were obtained. Corrosion of the DSG combustor walls and some other parts of the downhole package were noted. Metallurgical studies have been completed and recommendations made for other materials that are expected to better withstand the downhole combustion environment. 39 figures, 8 tables.

  18. SRC burn test in 700-hp oil-designed boiler. Volume 2. Engineering evaluation report. Final technical report. [Oil-fired boiler to solvent-refined coal

    Energy Technology Data Exchange (ETDEWEB)

    1983-12-01

    Volume 2 of this report gives the results of an engineering evaluation study and economic analysis of converting an existing 560-MW residual (No. 6) oil-fired unit to burn solvent refined coal (SRC) fuel forms. Volume 1 represents an integrated overview of the test program conducted at the Pittsburgh Energy Technology Center. Three SRC forms (pulverized SRC, a solution of SRC dissolved in process-derived distillates, and a slurry of SRC and water) were examined. The scope of modifications necessary to convert the unit to each of the three SRC fuel forms was identified and a capital cost of the necessary modifications estimated. A fuel conversion feasibility study of the boiler was performed wherein boiler modifications and performance effects of each fuel on the boiler were identified. An economic analysis of the capital and operating fuel expenses of conversion of the unit was performed. It was determined that conversion of the unit to any one of the three SRC fuel forms was feasible where appropriate modifications were made. It also was determined that the conversion of the unit can be economically attractive if SRC fuel forms can be manufactured and sold at prices discounted somewhat from the price of No. 16 Fuel Oil. As expected, greater discounts are required for the pulverized SRC and the slurry than for the solution of SRC dissolved in process-derived distillates.

  19. Volume Entropy

    CERN Document Server

    Astuti, Valerio; Rovelli, Carlo

    2016-01-01

    Building on a technical result by Brunnemann and Rideout on the spectrum of the Volume operator in Loop Quantum Gravity, we show that the dimension of the space of the quadrivalent states --with finite-volume individual nodes-- describing a region with total volume smaller than $V$, has \\emph{finite} dimension, bounded by $V \\log V$. This allows us to introduce the notion of "volume entropy": the von Neumann entropy associated to the measurement of volume.

  20. Test procedures and protocols: Their relevance to the figure of merit for thermal distribution systems. Volume 1: Informal report

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, J.W.

    1993-09-01

    A conceptual framework is developed that categorizes measurement protocols for forced-air thermal distribution systems in small buildings. This framework is based on the distinction between two generic approaches. The {open_quote}system-comparison{close_quote} approach seeks to determine, via a pair of whole-house energy-use measurements, the difference in energy use between the house with the as-found duct system and the same house with no energy losses attributable to the thermal distribution system. The {open_quote}component loss-factor{close_quote} approach identifies and measures the individual causes of duct losses, and then builds up a value for the net overall duct efficiency, usually with the help of computer simulation. Examples of each approach are analyzed and related to a proposed Figure of Merit for thermal distribution systems. This Figure of Merit would serve as the basis for a Standard Method of Test analogous to those already in place for furnaces, boilers, air conditioners, and heat pumps.

  1. SRC burn test in 700-hp oil-designed boiler. Annex Volume A. Southern Research Institute report. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    Combustion tests were performed using three forms of Solvent Refined Coal (SRC) as the fuel for a 700 hp oil-designed water-tube boiler at the U.S. Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC). This report contains the results from a program of measurements and analyses performed by Southern Research Institute (SoRI) under contract to the International Coal Refining Company (ICRC). The major objectives of the work performed by Southern Research Institute were: (1) to characterize the particulate matter resulting from the combustion of Solvent Refined Coal (SRC) and its fuel forms, and (2) to develop estimates of the specific collection areas required for varying levels of collection of fly ash from SRC combustion in electrostatic precipitators. The report contains physical and chemical characterizations of particles collected during the combustion experiments, and a discussion of electrostatic precipitation of SRC fly ash based on performance measurements with a small-scale precipitator and on simulations using a mathematical model. 9 references, 90 figures, 14 tables.

  2. Sensitivity and specificity of the Eating Assessment Tool and the Volume-Viscosity Swallow Test for clinical evaluation of oropharyngeal dysphagia

    Science.gov (United States)

    Rofes, L; Arreola, V; Mukherjee, R; Clavé, P

    2014-01-01

    Background Oropharyngeal dysphagia (OD) is an underdiagnosed digestive disorder that causes severe nutritional and respiratory complications. Our aim was to determine the accuracy of the Eating Assessment Tool (EAT-10) and the Volume-Viscosity Swallow Test (V-VST) for clinical evaluation of OD. Methods We studied 120 patients with swallowing difficulties and 14 healthy subjects. OD was evaluated by the 10-item screening questionnaire EAT-10 and the bedside method V-VST, videofluoroscopy (VFS) being the reference standard. The V-VST is an effort test that uses boluses of different volumes and viscosities to identify clinical signs of impaired efficacy (impaired labial seal, piecemeal deglutition, and residue) and impaired safety of swallow (cough, voice changes, and oxygen desaturation ≥3%). Discriminating ability was assessed by the AUC of the ROC curve and sensitivity and specificity values. Key Results According to VFS, prevalence of OD was 87%, 75.6% with impaired efficacy and 80.9% with impaired safety of swallow including 17.6% aspirations. The EAT-10 showed a ROC AUC of 0.89 for OD with an optimal cut-off at 2 (0.89 sensitivity and 0.82 specificity). The V-VST showed 0.94 sensitivity and 0.88 specificity for OD, 0.79 sensitivity and 0.75 specificity for impaired efficacy, 0.87 sensitivity and 0.81 specificity for impaired safety, and 0.91 sensitivity and 0.28 specificity for aspirations. Conclusions & Inferences Clinical methods for screening (EAT-10) and assessment (V-VST) of OD offer excellent psychometric proprieties that allow adequate management of OD. Their universal application among at-risk populations will improve the identification of patients with OD at risk for malnutrition and aspiration pneumonia. PMID:24909661

  3. The role of informal dimensions of safety in high-volume organisational routines: an ethnographic study of test results handling in UK general practice.

    Science.gov (United States)

    Grant, Suzanne; Checkland, Katherine; Bowie, Paul; Guthrie, Bruce

    2017-04-27

    The handling of laboratory, imaging and other test results in UK general practice is a high-volume organisational routine that is both complex and high risk. Previous research in this area has focused on errors and harm, but a complementary approach is to better understand how safety is achieved in everyday practice. This paper ethnographically examines the role of informal dimensions of test results handling routines in the achievement of safety in UK general practice and how these findings can best be developed for wider application by policymakers and practitioners. Non-participant observation was conducted of high-volume organisational routines across eight UK general practices with diverse organisational characteristics. Sixty-two semi-structured interviews were also conducted with the key practice staff alongside the analysis of relevant documents. While formal results handling routines were described similarly across the eight study practices, the everyday structure of how the routine should be enacted in practice was informally understood. Results handling safety took a range of local forms depending on how different aspects of safety were prioritised, with practices varying in terms of how they balanced thoroughness (i.e. ensuring the high-quality management of results by the most appropriate clinician) and efficiency (i.e. timely management of results) depending on a range of factors (e.g. practice history, team composition). Each approach adopted created its own potential risks, with demands for thoroughness reducing productivity and demands for efficiency reducing handling quality. Irrespective of the practice-level approach adopted, staff also regularly varied what they did for individual patients depending on the specific context (e.g. type of result, patient circumstances). General practices variably prioritised a legitimate range of results handling safety processes and outcomes, each with differing strengths and trade-offs. Future safety

  4. Skin autoreactivity in Hashimoto's thyroiditis patients without urticaria: autologous serum skin test positivity correlation with thyroid antibodies, sonographical volume and grading.

    Science.gov (United States)

    Turkoglu, Zafer; Zindanci, Ilkin; Turkoglu, Ozlem; Can, Burce; Kavala, Mukaddes; Tamer, Gonca; Ulucay, Vasfiye; Akyer, Erdal

    2012-01-01

    Recent studies have shown an association between anti-thyroid antibodies and autologous serum skin test (ASST) positive urticaria patients. However, a connection between thyroid and this reliable skin test for mast cell autoreactivity, ASST, has not been reported yet. We investigated ASST in patients with Hashimoto's thyroiditis (HT) without urticaria and compared the results with laboratory and sonographical findings of HT. 154 HT patients, 100 healthy volunteers without HT as a first control group and 46 patients with multinodular goitre but without autoimmune thyroid disease as a second control group underwent testing with ASST. ASST was applied to these groups according to two criteria, first as ASST(new): autologous serum red wheal response 1.5 mm bigger than negative control; second as ASST(old): serum red wheal response 5 mm bigger than negative control accepted as positive. Free triiodothyronine (fT3), free thyroxine (fT4), thyroid-stimulating hormone (TSH), thyroid peroxidase antibody (anti-TPO) and thyroglobulin antibody (anti-Tg) levels were measured. ASST(old), ASST(new) scored positive in 51.3-60.4% of HT patients, with statistically significant differences. Thyroid volume grades were inversely proportional with ASST(old) and (new) positivity. Moderate (+) titers of anti-Tg in ASST(old) and (new) (+) cases were significantly higher than the same titers of anti-Tg in ASST(old) and (new) (-) cases. The prevalence of ASST positivity in HT patients was not affected by the following factors: gender, age at screening, laboratory measurements of thyroid function tests, anti-TPO antibodies and thyroid ultrasound (US) echogenicity. Positivity of ASST in HT has shown that there is a skin mast cell autoreactivity in HT patients independent of autoreactive chronic urticaria (ACU).

  5. Gulf Coast geopressured-geothermal program summary report compilation. Volume 2-A: Resource description, program history, wells tested, university and company based research, site restoration

    Energy Technology Data Exchange (ETDEWEB)

    John, C.J.; Maciasz, G.; Harder, B.J.

    1998-06-01

    The US Department of Energy established a geopressured-geothermal energy program in the mid 1970`s as one response to America`s need to develop alternate energy resources in view of the increasing dependence on imported fossil fuel energy. This program continued for 17 years and approximately two hundred million dollars were expended for various types of research and well testing to thoroughly investigate this alternative energy source. This volume describes the following studies: Geopressured-geothermal resource description; Resource origin and sediment type; Gulf Coast resource extent; Resource estimates; Project history; Authorizing legislation; Program objectives; Perceived constraints; Program activities and structure; Well testing; Program management; Program cost summary; Funding history; Resource characterization; Wells of opportunity; Edna Delcambre No. 1 well; Edna Delcambre well recompletion; Fairfax Foster Sutter No. 2 well; Beulah Simon No. 2 well; P.E. Girouard No. 1 well; Prairie Canal No. 1 well; Crown Zellerbach No. 2 well; Alice C. Plantation No. 2 well; Tenneco Fee N No. 1 well; Pauline Kraft No. 1 well; Saldana well No. 2; G.M. Koelemay well No. 1; Willis Hulin No. 1 well; Investigations of other wells of opportunity; Clovis A. Kennedy No. 1 well; Watkins-Miller No. 1 well; Lucien J. Richard et al No. 1 well; and the C and K-Frank A. Godchaux, III, well No. 1.

  6. Test

    DEFF Research Database (Denmark)

    Bendixen, Carsten

    2014-01-01

    Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers.......Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers....

  7. Moemärke Hispaaniast / Riina Robinson

    Index Scriptorium Estoniae

    Robinson, Riina

    2008-01-01

    Kuulsad Hispaania moekunstnikud Paco Rabanne (sünd. 1934), Cristobal Balenciaga, Agatha Ruiz de la Prada (sünd. 1960), Oscar de la Renta (1932), Paloma Picasso (1949). Rõivapoodide ketid Zara, Mango ja El Corte Ingles

  8. Moemärke Hispaaniast / Riina Robinson

    Index Scriptorium Estoniae

    Robinson, Riina

    2008-01-01

    Kuulsad Hispaania moekunstnikud Paco Rabanne (sünd. 1934), Cristobal Balenciaga, Agatha Ruiz de la Prada (sünd. 1960), Oscar de la Renta (1932), Paloma Picasso (1949). Rõivapoodide ketid Zara, Mango ja El Corte Ingles

  9. MEMS/MOEMS application to optical communication

    Science.gov (United States)

    Fujita, Hiroyuki

    2001-09-01

    The paper describes brief summary of current MEMS technology and its application to optics. The optical application is one of the most important applications of MEMS because of two reasons; one is that the micromachine technology can provide high performances and new functionalities for optical systems and the other is that those optical microsystems can satisfy market demands for optical communication networks, displays, data storage and sensors. Opportunities for MEMS-based devices in optical communication networks are discussed. Some specific examples of MEMS optical switches are described.

  10. ORNL rod-bundle heat-transfer test data. Volume 6. Thermal-hydraulic test facility experimental data report for test 3. 05. 5B - double-ended cold-leg break simulation

    Energy Technology Data Exchange (ETDEWEB)

    Mullins, C.B.; Felde, D.K.; Sutton, A.G.; Gould, S.S.; Morris, D.G.; Robinson, J.J.; Schwinkendorf, K.N.

    1982-05-18

    Thermal-Hydraulic Test Facility (THTF) Test 3.05.5B was conducted by members of the ORNL PWR Blowdown Heat Transfer Separate-Effects Program on July 3, 1980. The objective of the program is to investigate heat transfer phenomena believed to occur in PWRs during accidents, including small and large break loss-of-coolant accidents. Test 3.05.5B was designed to provide transient thermal-hydraulics data in rod bundle geometry under reactor accident-type conditions. Reduced instrument responses are presented. Also included are uncertainties in the instrument responses, calculated mass flows, and calculated rod powers.

  11. Estimation of beat-to-beat changes in stroke volume from arterial pressure: A comparison of two pressure wave analysis techniques during head- up tilt testing in young, healthy men

    NARCIS (Netherlands)

    Jellema, W.T.; Imholz, B.P.M.; Oosting, H.; Wesseling, K.H.; Lieshout, J.J. van

    1999-01-01

    Objective: The aim of this study was to compare beat-to-beat changes in stroke volume (SV) estimated by two different pressure wave analysis techniques during orthostatic stress testing: pulse contour analysis and Modelflow, ie, simulation of a three-element model of aortic input impedance. Methods:

  12. Is Erythrocyte Protoporphyrin a Better Single Screening Test for Iron Deficiency Compared to Hemoglobin or Mean Cell Volume in Children and Women?

    Directory of Open Access Journals (Sweden)

    Zuguo Mei

    2017-05-01

    Full Text Available Hemoglobin (Hb, mean cell volume (MCV, and erythrocyte protoporphyrin (EP are commonly used to screen for iron deficiency (ID, but systematic evaluation of the sensitivity and specificity of these tests is limited. The objective of this study is to determine the sensitivity and specificity of Hb, MCV, and EP measurements in screening for ID in preschool children, non-pregnant women 15–49 years of age, and pregnant women. Data from the National Health and Nutrition Examination Surveys (NHANES (NHANES 2003–2006: n = 861, children three to five years of age; n = 3112, non-pregnant women 15 to 49 years of age. NHANES 1999–2006: n = 1150, pregnant women were examined for this purpose. Children or women with blood lead ≥10 µg/dL or C-reactive protein (CRP >5.0 mg/L were excluded. ID was defined as total body iron stores <0 mg/kg body weight, calculated from the ratio of soluble transferrin receptor (sTfR to serum ferritin (SF. The receiver operating characteristic (ROC curve was used to characterize the sensitivity and specificity of Hb, MCV, and EP measurements in screening for ID. In detecting ID in children three to five years of age, EP (Area under the Curve (AUC 0.80 was superior to Hb (AUC 0.62 (p < 0.01 but not statistically different from MCV (AUC 0.73. In women, EP and Hb were comparable (non-pregnant AUC 0.86 and 0.84, respectively; pregnant 0.77 and 0.74, respectively, and both were better than MCV (non-pregnant AUC 0.80; pregnant 0.70 (p < 0.01. We concluded that the sensitivity and specificity of EP in screening for ID were consistently superior to or at least as effective as those of Hb and MCV in each population examined. For children three to five years of age, EP screening for ID was significantly better than Hb and similar to MCV. For both non-pregnant and pregnant women, the performance of EP and Hb were comparable; both were significantly superior to MCV.

  13. Determination of blood leukocyte concentration with constant volume acquisition on a flow cytometer is comparable to individualized single platform testing with beads as internal reference standard

    DEFF Research Database (Denmark)

    Hansen, Susan; Dahl, Ronald; Hoffmann, Hans Jürgen

    2008-01-01

    Flow cytometers have a constant flow rate. This enables flow cytometers to measure leukocyte concentrations in a determined volume by acquiring data at a fixed rate over a fixed time and is called constant volume acquisition (CVA). The volume aspirated by a FACS Calibur flow cytometer in 4 min...... at a high rate has a median of 163 microl (IQR 156-170) with TruCount tubes. Leukocyte concentrations of 26 healthy volunteers were measured twice on up to four occasions with a Bürker-Türk chamber, by single platform technology (SPT) with TruCount tubes and on the same data set using CVA. Total leukocyte...... concentrations determined by CVA correlated better with measurements in a Bürker-Türk (BT) chamber than with SPT. Concentrations determined with CVA were 1.86% higher than with BT whereas SPT data were 5.35% higher than BT (pCVA (p

  14. Analysis and Test of Deep Flaws in Thin Sheets of Aluminum and Titanium. Volume 2: Crack Opening Displacement and Stress-Strain Data

    Science.gov (United States)

    Finger, R. W.

    1978-01-01

    Static fracture tests were performed on surface flawed specimens of aluminum and titanium alloys. A simulated proof overload cycle was applied prior to all of the cyclic tests. Variables included in each test series were flaw shapes and thickness. Additionally, test temperature was a variable for the aluminum test series. The crack opening displacement and stress-strain data obtained are presented.

  15. Computer-Based Testing System. Project STEEL. A Special Project To Develop and Implement a Computer-Based Special Teacher Education and Evaluation Laboratory. Volume III. Final Report.

    Science.gov (United States)

    Frick, Theodore W.; And Others

    The document is part of the final report on Project STEEL (Special Teacher Education and Evaluation Laboratory) intended to extend the utilization of technology in the training of preservice special education teachers. This volume focuses on the third of four project objectives, the development and implementation of a computer-based testing…

  16. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Three - Appendix F

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    This appendix supports the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-13711/V1. This volume contains Appendix F. Appendix F is essentially a photocopy of the ORNL researchers' laboratory notebooks from the Environmental Sciences Division (ESD) and the Radioactive Materials Analytical Laboratory (RMAL).

  17. In connection with the publication in Bali Med J 2016, Volume 5, Number 2: 25-29, entitled "Intra-Arterial Heparin Flushing Increases Manual Muscle Test – Medical Research Councils (MMT-MRC Score in Chronic Ischemic Stroke Patient "

    Directory of Open Access Journals (Sweden)

    Moh Hasan Machfoed

    2016-06-01

    Full Text Available  In connection with the publication in Bali Med J 2016, Volume 5, Number 2: 25-29, entitled "Intra-Arterial Heparin Flushing Increases Manual Muscle Test – Medical Research Councils (MMT-MRC Score in Chronic Ischemic Stroke Patient ", herewith, please allow us to do reviews of the study discussion. By assessing the discussion, it can be proved whether there are references that support the results of study.

  18. Renormalized Volume

    Science.gov (United States)

    Gover, A. Rod; Waldron, Andrew

    2017-09-01

    We develop a universal distributional calculus for regulated volumes of metrics that are suitably singular along hypersurfaces. When the hypersurface is a conformal infinity we give simple integrated distribution expressions for the divergences and anomaly of the regulated volume functional valid for any choice of regulator. For closed hypersurfaces or conformally compact geometries, methods from a previously developed boundary calculus for conformally compact manifolds can be applied to give explicit holographic formulæ for the divergences and anomaly expressed as hypersurface integrals over local quantities (the method also extends to non-closed hypersurfaces). The resulting anomaly does not depend on any particular choice of regulator, while the regulator dependence of the divergences is precisely captured by these formulæ. Conformal hypersurface invariants can be studied by demanding that the singular metric obey, smoothly and formally to a suitable order, a Yamabe type problem with boundary data along the conformal infinity. We prove that the volume anomaly for these singular Yamabe solutions is a conformally invariant integral of a local Q-curvature that generalizes the Branson Q-curvature by including data of the embedding. In each dimension this canonically defines a higher dimensional generalization of the Willmore energy/rigid string action. Recently, Graham proved that the first variation of the volume anomaly recovers the density obstructing smooth solutions to this singular Yamabe problem; we give a new proof of this result employing our boundary calculus. Physical applications of our results include studies of quantum corrections to entanglement entropies.

  19. Full-scale testing, production and cost analysis data for the advanced composite stabilizer for Boeing 737 aircraft. Volume 1: Technical summary

    Science.gov (United States)

    Aniversario, R. B.; Harvey, S. T.; Mccarty, J. E.; Parsons, J. T.; Peterson, D. C.; Pritchett, L. D.; Wilson, D. R.; Wogulis, E. R.

    1983-01-01

    The full scale ground test, ground vibration test, and flight tests conducted to demonstrate a composite structure stabilizer for the Boeing 737 aircraft and obtain FAA certification are described. Detail tools, assembly tools, and overall production are discussed. Cost analyses aspects covered include production costs, composite material usage factors, and cost comparisons.

  20. Blending of hydrogen in natural gas distribution systems. Volume II. Combustion tests of blends in burners and appliances. Final report, June 1, 1976--August 30, 1977. [8, 11, 14, 20, 22, 25, and 31% hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-10-01

    The emerging ''hydrogen economy'' is a strong contender as one method to supplement or extend the domestic natural gas supply. This volume of the subject study ''Blending Hydrogen in Natural Gas Distribution Systems'' describes combustion studies to determine the maximum amount of hydrogen that can be blended in natural gas and utilized satisfactorily in typical appliances with no adjustment or conversion. Eleven pilot burners and twenty-three main burners typical of those in current use were operated on hydrogen-natural gas mixtures containing approximately 8, 11, 14, 20, 22, 25, and 31 percent, by volume, hydrogen. The eleven pilot burners and thirteen main burners were tested outside the appliance they were a part of. Ten main burners were tested in their respective appliances. Performance of the various burners tested are as follows: (1) Gas blends containing more than 6 to 11% hydrogen are the limiting mixtures for target type pilot burners. (2) Gas blends containing more than 20 to 22% hyrogen are the limiting mixtures for main burners operating in the open. (3) Gas blends containing more than 22 to 25% hydrogen are the limiting mixtures for main burners tested in appliances. (4) Modification of the orifice in target pilots or increasing the supply pressure to a minimum of 7 inches water column will permit the use of gas blends with 20% hydrogen.

  1. International Conference on Harmonisation; Guidance on Q4B Evaluation and Recommendation of Pharmacopoeial Texts for Use in the International Conference on Harmonisation Regions; Annex on Test for Extractable Volume of Parenteral Preparations General Chapter; availability. Notice.

    Science.gov (United States)

    2009-01-09

    The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "Q4B Evaluation and Recommendation of Pharmacopoeial Texts for Use in the ICH Regions; Annex 2: Test for Extractable Volume of Parenteral Preparations General Chapter." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). The guidance provides the results of the ICH Q4B evaluation of the Test for Extractable Volume of Parenteral Preparations General Chapter harmonized text from each of the three pharmacopoeias (United States, European, and Japanese) represented by the Pharmacopoeial Discussion Group (PDG). The guidance conveys recognition of the three pharmacopoeial methods by the three ICH regulatory regions and provides specific information regarding the recognition. The guidance is intended to recognize the interchangeability between the local regional pharmacopoeias, thus avoiding redundant testing in favor of a common testing strategy in each regulatory region. In the Federal Register of February 21, 2008 (73 FR 9575), FDA made available a guidance on the Q4B process entitled "Q4B Evaluation and Recommendation of Pharmacopoeial Texts for Use in the ICH Regions."

  2. LOW OZONE-DEPLETING HALOCARBONS AS TOTAL-FLOOD AGENTS: VOLUME 2. LABORATORY-SCALE FIRE SUPPRESSION AND EXPLOSION PREVENTION TESTING

    Science.gov (United States)

    The report gives results from (1) flame suppression testing of potential Halon-1301 (CF3Br) replacement chemicals in a laboratory cup burner using n-heptane fuel and (2) explosion prevention (inertion) testing in a small-scale explosion sphere using propane and methane as fuels. ...

  3. Proceedings of the Third NRC/ASME Symposium on Valve and Pump Testing. Volume 2, Session 3A--Session 4B

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The 1994 Symposium on Valve and Pump Testing, jointly sponsored by the Board of Nuclear Codes and Standards of the American Society of Mechanical Engineers and by the Nuclear Regulatory Commission, provides a forum for the discussion of current programs and methods for inservice testing and motor-operated valve testing at nuclear power plants. The symposium also provides an opportunity to discuss the need to improve that testing in order to help ensure the reliable performance of pumps and valves. The participation of industry representatives, regulators, and consultants results in the discussion of a broad spectrum of ideas and perspectives regarding the improvement of inservice testing of pumps and valves at nuclear power plants. Individual papers have been cataloged separately.

  4. Pressurized fluidized-bed hydroretorting of eastern oil shales. Volume 2, Task 3, Testing of process improvement concepts: Final report, September 1987--May 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This final report, Volume 2, on ``Process Improvement Concepts`` presents the results of work conducted by the Institute of Gas Technology (IGT), the Illinois Institute of Technology (IIT), and the Ohio State University (OSU) to develop three novel approaches for desulfurization that have shown good potential with coal and could be cost-effective for oil shales. These are (1) In-Bed Sulfur Capture using different sorbents (IGT), (2) Electrostatic Desulfurization (IIT), and (3) Microbial Desulfurization and Denitrification (OSU and IGT). Results of work on electroseparation of shale oil and fines conducted by IIT is included in this report, as well as work conducted by IGT to evaluate the restricted pipe discharge system. The work was conducted as part of the overall program on ``Pressurized Fluidized-Bed Hydroretorting of Eastern Oil Shales.``

  5. Airside HVAC BESTEST. Adaptation of ASHRAE RP 865 Airside HVAC Equipment Modeling Test Cases for ASHRAE Standard 140. Volume 1, Cases AE101-AE445

    Energy Technology Data Exchange (ETDEWEB)

    Neymark, J. [J. Neymark & Associates, Golden, CO (United States); Kennedy, M. [Mike D. Kennedy, Inc., Townsend, WA (United States); Judkoff, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gall, J. [AAON, Inc., Tulsa, OK (United States); Knebel, D. [AAON, Inc., Tulsa, OK (United States); Henninger, R. [GARD Analytics, Inc., Arlington Heights, IL (United States); Witte, M. [GARD Analytics, Inc., Arlington Heights, IL (United States); Hong, T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McDowell, T. [Thermal Energy System Specialists, Madison, WI (United States); Yan, D. [Tsinghua Univ., Beijing (China); Zhou, X. [Tsinghua Univ., Beijing (China)

    2016-03-01

    This report documents a set of diagnostic analytical verification cases for testing the ability of whole building simulation software to model the air distribution side of typical heating, ventilating and air conditioning (HVAC) equipment. These cases complement the unitary equipment cases included in American National Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs, which test the ability to model the heat-transfer fluid side of HVAC equipment.

  6. Albumin Test

    Science.gov (United States)

    ... interfere with its production, increase protein breakdown, increase protein loss, and/or expand plasma volume (diluting the blood). Depending on the person's medical history, signs and symptoms, and physical exam, additional testing ...

  7. Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 9: PEP design, development and test plans

    Science.gov (United States)

    1979-01-01

    A plan for the production of two PEP flight systems is defined. The task's milestones are described. Provisions for the development and assembly of new ground support equipment required for both testing and launch operations are included.

  8. Association of levels of serum inhibin b and follicle-stimulating hormone with testicular vascularity, volume, and echotexture in children with undescended testes

    Directory of Open Access Journals (Sweden)

    Abhishek Chinya

    2017-01-01

    Conclusions: Our findings hint to the fact that palpable UDT forms a homogenous group, whether unilateral or bilateral, whereas impalpable testes may form a separate category and need further studies to substantiate this hypothesis.

  9. Sweet Lake Geopressured-geothermal Project, Magma Gulf-Technadril/DOE Amoco Fee. Volume II. Surface installations reservoir testing. Annual report, February 28, 1981-February 10, 1982

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, K.S. (ed.)

    1984-01-01

    The Magma Gulf-Technadril/Department of Energy Amoco Fee No. 1 (production) and salt water disposal wells were drilled in the period from August, 1980 to February 1981. Surface facilities were designed and constructed during March-June 1981. Flow testing began in June 1981 and continued until February, 1982. The Miogypsinoides interval contains seven discrete sands in the test well. These sands have been numbered 1 to 7, beginning at the top of the sequence. Data from wireline logs and core samples suggested that the first zone to be perforated should be Sand 5. Because of its high porosity and permeability, Sand 5 was thought to contain almost 50% of the total hydraulic capacity of the well. Flow testing of Sand 5 was performed in three stages, each of which is fully described in this report. Phase I was designed as an initial clean-up flow and a reservoir confirmation test. Phase II consisted of the reservoir limit determination test and lasted 17 days. Boundaries were confirmed which suggest that the Sweet Lake reservoir is fairly narrow, with boundaries on three sides, but is open in one direction with no closure for at least 4-1/4 miles. These boundaries approximate the shape of the graben in which the test well was drilled, but may or may not be directly related to the major faults forming the graben. Phase III testing was planned to be a long-term test at commercial design rates. Although Sand 5 alone would not support such rates, long-term production was demonstrated. Additional research not supported by DOE funding was also performed during the period covered by this report. This research, consisting of mud logging, micropaleontology, organic geochemistry, core analysis, and rock mechanics, is summarized in this report.

  10. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement; Volume 1, Appendix F, Nevada Test Site and Oak Ridge Reservation Spent Nuclear Fuel Management Programs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-01

    This volume addresses the interim storage of spent nuclear fuel (SNF) at two US Department of Energy sites, the Nevada Test Site (NTS) and the Oak Ridge Reservation (ORR). These sites are being considered to provide a reasonable range of alternative settings at which future SNF management activities could be conducted. These locations are not currently involved in management of large quantities of SNF; NTS has none, and ORR has only small quantities. But NTS and ORR do offer experience and infrastructure for the handling, processing and storage of radioactive materials, and they do exemplify a broad spectrum of environmental parameters. This broad spectrum of environmental parameters will provide, a perspective on whether and how such location attributes may relate to potential environmental impacts. Consideration of these two sites will permit a programmatic decision to be based upon an assessment of the feasible options without bias, to the current storage sites. This volume is divided into four parts. Part One is the volume introduction. Part Two contains chapters one through five for the NTS, as well as references contained in chapter six. Part Three contains chapters one through five for the ORR, as well as references contained in chapter six. Part Four is summary information including the list of preparers, organizations contacted, acronyms, and abbreviations for both the NTS and the ORR. A Table of Contents, List of Figures, and List of Tables are included in parts Two, Three, and Four. This approach permitted the inclusion of both sites in one volume while maintaining consistent chapter numbering.

  11. Investigation and evaluation of geopressured-geothermal wells. Fairfax Foster Sutter No. 2 well, St. Mary Parish, Louisiana. Volume I. Completion and testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Willits, M.H.; McCoy, R.L.; Dobson, R.J.; Hartsock, J.H.

    1979-12-01

    The Fairfax Foster Sutter No. 2 well, located in the East Franklin area of St. Mary Parish, Louisiana, is the first successful test of a geopressured-geothermal aquifer under the Well-of-Opportunity program. The section tested was the MA-6 sand of lower Miocene age which has produced large quantities of gas from the adjacent but structurally separated Garden City field. In the subject well the observed temperature was 270{sup 0}F (132{sup 0}C) and the measured gradient was 0.77 psi/ft. The gross sand thickness was 270 feet, the net sand thickness 190 feet, and the tested interval 58 net feet. The temperatures and pressures encountered approached the limits of the surface-recording bottomhole pressure gauge and particularly the single-conductor cables on which the gauges were run. The objectives of the tests were all accomplished, and data were obtained which will contribute to the overall assessment of the geopressured-geothermal resource of the Upper Gulf of Mexico basin. In general, the gas solubility (22.8 scf/bbl) was as expected for the temperature, pressure, and salinity of the brine. The produced water was more saline than expected (160,000 mg/l). The high concentrations of dissolved solids, coupled with the evolution of CO{sub 2} from these waters during production, created a scaling problem in the tubular goods and surface equipment that will have to be addressed in future tests.

  12. Renormalized Volume

    CERN Document Server

    Gover, A Rod

    2016-01-01

    For any conformally compact manifold with hypersurface boundary we define a canonical renormalized volume functional and compute an explicit, holographic formula for the corresponding anomaly. For the special case of asymptotically Einstein manifolds, our method recovers the known results. The anomaly does not depend on any particular choice of regulator, but the coefficients of divergences do. We give explicit formulae for these divergences valid for any choice of regulating hypersurface; these should be relevant to recent studies of quantum corrections to entanglement entropies. The anomaly is expressed as a conformally invariant integral of a local Q-curvature that generalizes the Branson Q-curvature by including data of the embedding. In each dimension this canonically defines a higher dimensional generalization of the Willmore energy/rigid string action. We show that the variation of these energy functionals is exactly the obstruction to solving a singular Yamabe type problem with boundary data along the...

  13. Experimental investigation of shock-cell noise reduction for dual-stream nozzles in simulated flight comprehensive data report. Volume 1: Test nozzles and acoustic data

    Science.gov (United States)

    Yamamoto, K.; Janardan, B. A.; Brausch, J. F.; Hoerst, D. J.; Price, A. O.

    1984-02-01

    Parameters which contribute to supersonic jet shock noise were investigated for the purpose of determining means to reduce such noise generation to acceptable levels. Six dual-stream test nozzles with varying flow passage and plug closure designs were evaluated under simulated flight conditions in an anechoic chamber. All nozzles had combined convergent-divergent or convergent flow passages. Acoustic behavior as a function of nozzle flow passage geometry was measured. The acoustic data consist primarily of 1/3 octave band sound pressure levels and overall sound pressure levels. Detailed schematics and geometric characteristics of the six scale model nozzle configurations and acoustic test point definitions are presented. Tabulation of aerodynamic test conditions and a computer listing of the measured acoustic data are displayed.

  14. Experimental investigation of shock-cell noise reduction for dual-stream nozzles in simulated flight comprehensive data report. Volume 1: Test nozzles and acoustic data

    Science.gov (United States)

    Yamamoto, K.; Janardan, B. A.; Brausch, J. F.; Hoerst, D. J.; Price, A. O.

    1984-01-01

    Parameters which contribute to supersonic jet shock noise were investigated for the purpose of determining means to reduce such noise generation to acceptable levels. Six dual-stream test nozzles with varying flow passage and plug closure designs were evaluated under simulated flight conditions in an anechoic chamber. All nozzles had combined convergent-divergent or convergent flow passages. Acoustic behavior as a function of nozzle flow passage geometry was measured. The acoustic data consist primarily of 1/3 octave band sound pressure levels and overall sound pressure levels. Detailed schematics and geometric characteristics of the six scale model nozzle configurations and acoustic test point definitions are presented. Tabulation of aerodynamic test conditions and a computer listing of the measured acoustic data are displayed.

  15. Low speed wind tunnel test of ground proximity and deck edge effects on a lift cruise fan V/STOL configuration, volume 1

    Science.gov (United States)

    Stewart, V. R.

    1979-01-01

    The characteristics were determined of a lift cruise fan V/STOL multi-mission configuration in the near proximity to the edge of a small flat surface representation of a ship deck. Tests were conducted at both static and forward speed test conditions. The model (0.12 scale) tested was a four fan configuration with modifications to represent a three fan configuration. Analysis of data showed that the deck edge effects were in general less critical in terms of differences from free air than a full deck (in ground effect) configuration. The one exception to this was when the aft edge of the deck was located under the center of gravity. This condition, representative of an approach from the rear, showed a significant lift loss. Induced moments were generally small compared to the single axis control power requirements, but will likely add to the pilot work load.

  16. Low concentration ratio solar array for low Earth orbit multi-100 kW application. Volume 1: Design, analysis and development tests

    Science.gov (United States)

    1983-01-01

    A preliminary design effort directed toward a low concentration ratio photovoltaic array system capable of delivering multihundred kilowatts (300 kW to 1000 kW range) in low earth orbit is described. The array system consists of two or more array modules each capable of delivering between 113 kW to 175 kW using silicon solar cells or gallium arsenide solar cells, respectively. The array module deployed area is 1320 square meters and consists of 4356 pyramidal concentrator elements. The module, when stowed in the Space Shuttle's payload bay, has a stowage volume of a cube with 3.24 meters on a side. The concentrator elements are sized for a geometric concentration ratio (GCR) of six with an aperture area of .25 sq. m. The structural analysis and design trades leading to the baseline design are discussed. It describes the configuration, as well as optical, thermal and electrical performance analyses that support the design and overall performance estimates for the array are described.

  17. Monopropellant engine investigation for space shuttle reaction control. Volume 2: Design, fabrication, and demonstration test of a catalytic gas generator for the space shuttle APU

    Science.gov (United States)

    1975-01-01

    The capability of a catalytic gas generator to meet the requirement specified for the space shuttle APU is established. A full-scale gas generator, designed to operate at a chamber pressure of 750 psia and a flow rate of 0.36 lbm/sec, was fabricated and subjected to three separate life test series. The nickel foam metal used for catalyst retention was investigated. Inspection of the foam metal following the first life test revealed significant degradation. Consequently an investigation was conducted to determine the mechanism of degradation and to provide an improved foam metal.

  18. Proceedings of the Annual Conference of the Military Testing Association (23rd) held at Arlington, Virginia on 25-30 October 1981. Volume 2

    Science.gov (United States)

    1981-10-01

    Freudian psychoanalytic theory ) or external (e.g., "the devil made me do it") locus of control (cf., Mayhew, 1981). Unfortunately the length constraints on...of Information in Item Response Theory and Robust Ability Estimation. AD-POOl 397 Validity Considerations for Adaptive Testing Systems. AD-PO01 398...Performance Appraisal System. ’-AD-P00l 408 Development of the Job Reading Test (JRT). -AD-P001 409 A Theory and Model of Item Readability. --AD-P001

  19. Flow Rate Calculation in the Auto Air Leakage Volume Test System Based on Constant Pressure Method%基于恒压法的汽车整车漏风量测试系统流量计算

    Institute of Scientific and Technical Information of China (English)

    李亚; 赵鑫; 李振亮; 许玮

    2013-01-01

    An auto air leakage volume test system based on constant pressure method was designed. Using standard orifice plate as throttle device,after testing some original data such as the differential pressure between both sides of the throttle device,temperature of the dry-bulb and the wet-bulb,and so on,the auto air leakage volume can be calculated. The formulas and methods involved were demonstrated in detail and the experiment was designed based on an analysis of the measurement theory. According to the result of the experiment,this method proved stable and reliable and can satisfy the requirement of the measurement.%  设计了基于恒压法的汽车整车漏风量测试系统。采用标准孔板作为节流件,通过测量节流件上下游的压力差、干球温度和湿球温度等基础数据,经过计算可得到整车漏风量。在分析测量原理的基础上,详细给出了计算漏风量的公式和方法,并进行了实验。实验结果表明,该计算方法稳定可靠,可满足测量要求。

  20. Integration and testing of hot desulfurization and entrained-flow gasification for power generation systems. Phase 2, Process optimization: Volume 1, Program summary and PDU operations

    Energy Technology Data Exchange (ETDEWEB)

    Robin, A.M.; Kassman, J.S.; Leininger, T.F.; Wolfenbarger, J.K.; Wu, C.M.; Yang, P.P.

    1991-09-01

    This second Topical Report describes the work that was completed between January 1, 1989 and December 31, 1990 in a Cooperative Agreement between Texaco and the US Department of Energy that began on September 30, 1987. During the period that is covered in this report, the development and optimization of in-situ and external desulfurization processes were pursued. The research effort included bench scale testing, PDU scoping tests, process economic studies and advanced instrument testing. Two bench scale studies were performed at the Research Triangle Institute with zinc titanate sorbent to obtain data on its cycle life, sulfur capacity, durability and the effect of chlorides. These studies quantify sulfur capture during simulated air and oxygen-blown gasification for two zinc titanate formulations. Eight PDU runs for a total of 20 days of operation were conducted to evaluate the performance of candidate sorbents for both in-situ and external desulfurization. A total of 47 tests were completed with oxygen and air-blown gasification. Candidate sorbents included iron oxide for in-situ desulfurization and calcium based and mixed metal oxides for external desulfurization. Gasifier performance and sorbent sulfur capture are compared for both air-blown and oxygen-blown operation.

  1. Final technical report: SRC burn test in 700-hp oil-designed boiler. Annex Volume D. Electrostatic precipitator mass train and operating data

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    Solvent Refined Coal (SRC) is one of the viable replacement fuels for No. 6 fuel oil in industrial and utility boilers. The Department of Energy funded the International Coal Refining Company (ICRC) to develop and to demonstrate the use of SRC as a practical fuel. Phase II of the project was to burn the SRC fuels in a 700 hp package boiler and to collect emission data from which air pollution control devices could be specified. Wheelabrator-Frye, Inc., APC Division was contracted by ICRC to supply and operate a pilot electrostatic precipitator (ESP). Mass emission testing was performed by WFI Sciences. Particle size tests, particle resistivity, SO/sub x/ measurements, and particulate counting tests were conducted by Southern Research Institute (SoRI). This report is a source document covering the ESP operating data and mass emission data. The data obtained by SoRI is used by SoRI in their computer model to specify full scale design criteria. The testing was performed with four fuel types; No. 6 fuel oil, SRC fuel, SRC residual fuel oil, and SRC-water slurry. All fuels were precipitated quite easily resulting in emission rates below the NSPS standards.

  2. Integration and testing of hot desulfurization and entrained-flow gasification for power generation systems. Phase 2, Process optimization: Volume 1, Program summary and PDU operations

    Energy Technology Data Exchange (ETDEWEB)

    Robin, A.M.; Kassman, J.S.; Leininger, T.F.; Wolfenbarger, J.K.; Wu, C.M.; Yang, P.P.

    1991-09-01

    This second Topical Report describes the work that was completed between January 1, 1989 and December 31, 1990 in a Cooperative Agreement between Texaco and the US Department of Energy that began on September 30, 1987. During the period that is covered in this report, the development and optimization of in-situ and external desulfurization processes were pursued. The research effort included bench scale testing, PDU scoping tests, process economic studies and advanced instrument testing. Two bench scale studies were performed at the Research Triangle Institute with zinc titanate sorbent to obtain data on its cycle life, sulfur capacity, durability and the effect of chlorides. These studies quantify sulfur capture during simulated air and oxygen-blown gasification for two zinc titanate formulations. Eight PDU runs for a total of 20 days of operation were conducted to evaluate the performance of candidate sorbents for both in-situ and external desulfurization. A total of 47 tests were completed with oxygen and air-blown gasification. Candidate sorbents included iron oxide for in-situ desulfurization and calcium based and mixed metal oxides for external desulfurization. Gasifier performance and sorbent sulfur capture are compared for both air-blown and oxygen-blown operation.

  3. Investigation of difficult component effects on finite element model vibration prediction for the Bell AH-1G helicopter. Volume 1: Ground vibration test results

    Science.gov (United States)

    Dompka, R. V.

    1989-01-01

    Under the NASA-sponsored Design Analysis Methods for VIBrationS (DAMVIBS) program, a series of ground vibration tests and NASTRAN finite element model (FEM) correlations were conducted on the Bell AH-1G helicopter gunship to investigate the effects of difficult components on the vibration response of the airframe. Previous correlations of the AH-1G showed good agreement between NASTRAN and tests through 15 to 20 Hz, but poor agreement in the higher frequency range of 20 to 30 Hz. Thus, this effort emphasized the higher frequency airframe vibration response correlations and identified areas that need further R and T work. To conduct the investigations, selected difficult components (main rotor pylon, secondary structure, nonstructural doors/panels, landing gear, engine, fuel, etc.) were systematically removed to quantify their effects on overall vibratory response of the airframe. The entire effort was planned and documented, and the results reviewed by NASA and industry experts in order to ensure scientific control of the testing, analysis, and correlation exercise. In particular, secondary structure and damping had significant effects on the frequency response of the airframe above 15 Hz. Also, the nonlinear effects of thrust stiffening and elastomer mounts were significant on the low frequency pylon modes below main rotor 1p (5.4 Hz). The results of the ground vibration testing are presented.

  4. Biochemical kinetics in changing volumes.

    Science.gov (United States)

    Pawłowski, Piotr H; Zielenkiewicz, Piotr

    2004-01-01

    The need of taking into account the change of compartment volume when developing chemical kinetics analysis inside the living cell is discussed. Literature models of a single enzymatic Michaelis-Menten process, glycolytic oscillations, and mitotic cyclin oscillations were tested with appropriate theoretical extension in the direction of volume modification allowance. Linear and exponential type of volume increase regimes were compared. Due to the above, in a growing cell damping of the amplitude, phase shift, and time pattern deformation of the metabolic rhythms considered were detected, depending on the volume change character. The performed computer simulations allow us to conclude that evolution of the cell volume can be an essential factor of the chemical kinetics in a growing cell. The phenomenon of additional metabolite oscillations caused by the periodic cell growth and division was theoretically predicted and mathematically described. Also, the hypothesis of the periodized state in the growing cell as the generalization of the steady-state was formulated.

  5. Development of wear-resistant ceramic coatings for diesel engine components. Volume 1, Coating development and tribological testing: Final report: DOE/ORNL Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Naylor, M.G.S. [Cummins Engine Co., Inc., Columbus, IN (United States)

    1992-06-01

    The tribological properties of a variety of advanced coating materials have been evaluated under conditions which simulate the piston ring -- cylinder liner environment near top ring reversal in a heavy duty diesel engine. Coated ``ring`` samples were tested against a conventional pearlitic grey cast iron liner material using a high temperature reciprocating wear test rig. Tests were run with a fresh CE/SF 15W40lubricant at 200 and 350{degrees}C, with a high-soot, engine-tested oil at 200{degrees}C and with no lubrication at 200{degrees}C. For lowest wear under boundary lubricated conditions, the most promising candidates to emerge from this study were high velocity oxy-fuel (HVOF) Cr{sub 3} C{sub 2} - 20% NiCr and WC - 12% Co cermets, low temperature arc vapor deposited (LTAVD) CrN and plasma sprayed chromium oxides. Also,plasma sprayed Cr{sub 2}O{sub 3} and A1{sub 2}O{sub 3}-ZrO{sub 2} materials were found to give excellent wear resistance in unlubricated tests and at extremely high temperatures (450{degrees}C) with a syntheticoil. All of these materials would offer substantial wear reductions compared to the conventional electroplated hard chromium ring facing and thermally sprayed metallic coatings, especially at high temperatures and with high-soot oils subjected to degradation in diesel environments. The LTAVD CrN coating provided the lowest lubricated wear rates of all the materials evaluated, but may be too thin (4 {mu}m) for use as a top ring facing. Most of the coatings evaluated showed higher wear rates with high-soot, engine-tested oil than with fresh oil, with increases of more than a factor of ten in some cases. Generally, metallic materials were found to be much more sensitive to soot/oil degradation than ceramic and cermet coatings. Thus, decreased ``soot sensitivity`` is a significant driving force for utilizing ceramic or cermet coatings in diesel engine wear applications.

  6. Mirror Fusion Test Facility-B (MFTF-B) axicell configuration: NbTi magnet system. Design and analysis summary. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Heathman, J.H.; Wohlwend, J.W.

    1985-05-01

    This report summarizes the designs and analyses produced by General Dynamics Convair for the four Axicell magnets (A1 and A20, east and west), the four Transition magnets (T1 and T2, east and west), and the twelve Solenoid magnets (S1 through S6, east and west). Over four million drawings and specifications, in addition to detailed stress analysis, thermal analysis, electrical, instrumentation, and verification test reports were produced as part of the MFTF-B design effort. Significant aspects of the designs, as well as key analysis results, are summarized in this report. In addition, drawing trees and lists off detailed analysis and test reports included in this report define the locations of the detailed design and analysis data.

  7. Proceedings of the Annual Conference of the Military Testing Association Held in San Diego, California on 26-29 October 1992. Volume 1

    Science.gov (United States)

    1992-10-29

    samples and over time (Dunnette, Kirchner, Erikson , & Banas, 1960; Schwab & Oliver, 1974; Walker, 1985; White & Kilcullen, 1992). In addition, item...validation. Paper presented at the 100th annual meeting of the American Psychological Association, Washington DC. Dunnette, M.D., Kirchner, W.K, Erikson ... ERIC Documentation Reproduction No. ED 037 089) Kingsbury, G. G., & Weiss, D. J. (1983). A comparison of IRT-based adaptive mastery testing and a

  8. Sealed source and device design safety testing. Volume 5: Technical report on the findings of Task 4, Investigation of failed radioactive stainless steel troxler gauges

    Energy Technology Data Exchange (ETDEWEB)

    Benac, D.J.; Schick, W.R. [Southwest Research Inst., San Antonio, TX (United States)

    1995-10-01

    This report covers the Task 4 activities for the Sealed Source and Device Safety testing program. SwRI was contracted to investigate failed radioactive stainless steel troxler gauges. SwRI`s task was to determine the cause of failure of the rods and the extent of the problem. SwRI concluded that the broken rod failed in a brittle manner due to a hard zone in the heat affected zone.

  9. Impact-Echo for the evaluation of concrete structures, In : Non-destructive evaluation of reinforced concrete structures, Volume 2: Non-destructive testing methods

    OpenAIRE

    Abraham, Odile; Popovics, John

    2010-01-01

    This chapter describes the impact echo non-destructive test method. After a summary of the history of the development of the method, the basic physical phenomena underlying the method are presented. Then data analysis approaches and signal processing techniques, including time and frequency domain processing, are described. A description of the needed equipment and classical measurement configurations are reviewed. Finally classical applications of the impact echo method are summarized.

  10. Research in drug development against viral diseases of military importance (biological testing). Volume 2. Final report, 15 November 1985-31 January 1991

    Energy Technology Data Exchange (ETDEWEB)

    Shannon, W.M.; Arnett, G.; Brazier, A.D.; Hollingshead, M.G.; Kirsi, J.J.

    1991-03-01

    The purpose of this program is to evaluate the efficacy of candidate antiviral compounds against a spectrum of viruses of military importance. This program involves (a) primary testing of chemical compounds and natural products for antiviral efficacy in vitro using standard CPE-inhibition assays, (b) primary testing of compounds for antiviral efficacy in vivo in animal model systems, and (c) secondary evaluation of the active candidate antiviral compounds. The target viruses for in vitro testing are Vaccinia Virus (VV), Adenovirus (AD2), Vesicular Stomatitis Virus (VSV), Punta Toro Virus (PT), Sandfly fever Virus (SF), Yellow Fever Virus (YF), Venezuelan Equine Encephalomyelitis Virus (VE), Japanese Encephalitis Virus, Pichinde Virus (PIC), Hantaan Virus (HTN), and Human Immunodeficiency Virus (HIV). The in vivo systems are Pichinde Virus infection of hamsters, Venezuelan Equine Encephalomyelitis Virus, Japanese Encephalitis Virus and Vaccinia virus infections of mice. Approximately 10,000 compounds have been received for in vitro evaluation and over 66,000 assays have been performed on this contract. Compounds have been identified in nearly all virus systems that have confirmed antiviral activity equal or exceeding that of the various positive control compounds (ribavirin, selenazofurin, carbocyclic-3-aza-adenosine, adenosine dialdehyde, Ara-A, ddC and AZT). Many of these compounds represent potent and selective new antiviral agents.

  11. Research in drug development against viral diseases of military importance (biological testing). Volume 1. Final report, 15 November 1985-31 January 1991

    Energy Technology Data Exchange (ETDEWEB)

    Shannon, W.M.; Arnett, G.; Brazier, A.D.; Hollingshead, M.G.; Kirsi, J.J.

    1991-03-01

    The purpose of this program is to evaluate the efficacy of candidate antiviral compounds against a spectrum of viruses of military importance. This program involves (a) primary testing of chemical compounds and natural products for antiviral efficacy in vitro using standard CPE-inhibition assays, (b) primary testing of compounds for antiviral efficacy in vivo in animal model systems, and (c) secondary evaluation of the active candidate antiviral compounds. The target viruses for in vitro testing are Vaccinia Virus (VV), Adenovirus (AD2), Vesicular Stomatitis Virus (VSV), Punta Toro Virus (PT), Sandfly Fever Virus (SF), Yellow Fever Virus (YF), Venezuelan Equine Encephalomyelitis Virus (VE), Japanese Encephalitis Virus and Vaccinia Virus infections of mice. Approximately 10,000 compounds have been received for in vitro evaluation and over 66,000 assays have been performed on this contract. Compounds have been identified in nearly all virus systems that have confirmed antiviral activity equal or exceeding that of the various positive control compounds (Ribavirin, Selenazofurin, Carbocyclic-3-deaza-adenosine, Adenosine dialdehyde, Ara-A, ddC and AZT). Many of these compounds represent potent and selective new antiviral agents.

  12. PATRAM '80. Proceedings. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Huebner, H.W. (ed.)

    1980-01-01

    Volume 2 contains papers from the following sessions: Safeguards-Related Problems; Neutronics and Criticality; Operations and Systems Experience II; Plutonium Systems; Intermediate Storage in Casks; Operations and Systems Planning; Institutional Issues; Structural and Thermal Evaluation I; Poster Session B; Extended Testing I; Structural and Thermal Evaluation II; Extended Testing II; and Emergency Preparedness and Response. Individual papers were processed. (LM)

  13. Straight-to-test colonoscopy for 2-week-wait referrals improves time to diagnosis of colorectal cancer and is feasible in a high-volume unit.

    Science.gov (United States)

    Banerjea, A; Voll, J; Chowdhury, A; Siddika, A; Thomson, S; Briggs, R; Humes, D J

    2017-09-01

    We have introduced 'straight-to-test' (STT) colonoscopy as part of our 2-week-wait (2WW) pathway to address increasing numbers of urgent referrals for colorectal cancer (CRC) within the National Health Service. In this study we evaluated the ability of this initiative to shorten the time to diagnosis of CRC. We amended our 2WW referral form to include performance status and comorbidities. General practitioners were asked to provide data on estimated glomerular filtration rate and full blood count/ferritin. Our 2WW referrals were screened by a colorectal consultant and a nurse specialist. Those deemed unsuitable for STT were offered outpatient assessment (OPA). Of 553 2WW referrals screened, 352 were considered suitable, 65 of whom failed a telephone assessment or were uncontactable, and accordingly 287 were offered the STT pathway. The STT group was significantly younger than the OPA group (median 65.9 years vs 78.7 years; P STT colonoscopy significantly reduced the time to first test (13 days vs 22 days; P STT pathway were managed with 'best supportive care only' compared with patients attending OPA (one of 15 vs six of 22, respectively). STT colonoscopy obviated the need for clinic attendance before testing in 287 patients, representing a potential net cost benefit of at least £48 500 in 4 months. STT colonoscopy was safe and effective for selecting out a group of symptomatic patients who could proceed straight to endoscopic examination and receive a diagnosis more rapidly. Colorectal Disease © 2017 The Association of Coloproctology of Great Britain and Ireland.

  14. SRC burn test in 700-hp oil-designed boiler. Annex Volume B. DOE-Pittsburgh Energy Technology Center report. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    Solvent Refined Coal (SRC) combustion tests were conducted at the U.S. Department of Energy's Pittsburgh Energy Technology Center. Combustion and flue-gas treatment of three different physical forms of SRC, as well as a No. 6 fuel oil, were evaluated. The three SRC fuels were (1) pulverized SRC Fuel; (2) SRC Residual Fuel Oil; and (3) SRC/Water Slurry. The SRC Residual Fuel Oil was a solution of SRC Fuel dissolved in heated process solvent. Approximately 500 tons of pulverized SRC Fuel and 30,000 gallons of SRC Residual Fuel Oil were combusted in a 700 hp (30 x 130 x 10/sup 6/ Btu/hr fuel input) oil-designed watertube package boiler. Sixty four-hour ASME combustion tests with three different SRC fuels were successfully concluded. The principal parameters evaluated were excess air levels and combustion air preheat temperature levels. Extensive data were collected on flue-gas levels of O/sub 2/, CO/sub 2/, CO, unburned hydrocarbons, SO/sub x/, NO/sub x/, uncontrolled particulates, uncontrolled opacity and carbon content of the flue-gas particulates. Boiler and combustion efficiencies were measured. The particulates were characterized via mass loadings, impactors, in-situ resistivity measurements, ultra-fine sampling, optical large particle sampling, five-stage cyclone sampling and chemical analysis of various cut sizes. A three-field pilot electrostatic precipitator (ESP) containing over 1000 square feet of plate collection area, a reverse air fabric filter pilot dust collector and a commercial pulse-jet fabric filter dust collector were operated at high collection efficiency. The results will be valuable in making recommendations for future tests and will provide a basis for conversion of industrial oil-fired boilers to SRC fuels. 11 references, 20 figures, 29 tables.

  15. Proceedings of the Annual Conference of the Military Testing Association (27th) Held in San Diego, California on 21-25 October 1985. Volume 2

    Science.gov (United States)

    1985-10-25

    missiles; the other SHORAD weapons are the man-portable Redeye and Stinger missile systems, and the Vulcan vehicle-msunted gun system (FM 44-1, 1976). All...Chaparral / Vulcan . Washington, D.C. Headquarters, Departrnt of the Army (1984, Novenber 2). FM 44-4, Operations and training, Chaparral. Washington, D.C...c,tve Test Cevelonnpert The finalized tesi design specification is produced on-site via a word process;ng compLterized process, and is reviewed by

  16. Descriptive Summaries of the Research Development Test & Evaluation Army Appropriation FY 1983. Supporting Data FY 1983, Budget Estimate Submitted to Congress February 1982. Volume II.

    Science.gov (United States)

    1982-02-01

    8217 routi 1 I) ’IT to 5/si III ini5 ’ 2: n ;,r I- tery lIowir (in) I ) /1 1 20 (1, ;W l I I UI cii , 1i we -11 1 p n Ir -d"te ( 1is SOl)i1’i 6o/1111110...generation (electromechanical power), fuel cells and bat- teries (electrochemical power), and other power-related devices and associated technology to...effort to produce a new vaccine. Field trials for a vaccine against chikungunya virus (a potential BW agent) will take place. The testing of promising

  17. Advanced turboprop testbed systems study. Volume 1: Testbed program objectives and priorities, drive system and aircraft design studies, evaluation and recommendations and wind tunnel test plans

    Science.gov (United States)

    Bradley, E. S.; Little, B. H.; Warnock, W.; Jenness, C. M.; Wilson, J. M.; Powell, C. W.; Shoaf, L.

    1982-01-01

    The establishment of propfan technology readiness was determined and candidate drive systems for propfan application were identified. Candidate testbed aircraft were investigated for testbed aircraft suitability and four aircraft selected as possible propfan testbed vehicles. An evaluation of the four candidates was performed and the Boeing KC-135A and the Gulfstream American Gulfstream II recommended as the most suitable aircraft for test application. Conceptual designs of the two recommended aircraft were performed and cost and schedule data for the entire testbed program were generated. The program total cost was estimated and a wind tunnel program cost and schedule is generated in support of the testbed program.

  18. Phase 1 of the First Small Power System Experiment (engineering Experiment No. 1). Volume 3: Experimental System Descriptions. [development and testing of a solar thermal power plant

    Science.gov (United States)

    Holl, R. J.

    1979-01-01

    The design and development of a modular solar thermal power system for application in the 1 to 10 MWe range is described. The system consists of five subsystems: the collector, power conversion, energy transport, energy storage, and the plant control subsystem. The collector subsystem consists of concentrator, receiver, and tower assemblies. The energy transport subsystem uses a mixture of salts with a low melting temperature to transport thermal energy. A steam generator drives a steam Rankine cycle turbine which drives an electrical generator to produce electricity. Thermal and stress analysis tests are performed on each subsystem in order to determine the operational reliability, the minimum risk of failure, and the maintenance and repair characteristics.

  19. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Two, Appendices C, D, and E

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    These appendices support the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-1371 l/Vol. This volume contains Appendices C-E. Appendix C is a compilation of all recorded data and mathematical calculations made to interpret the data. For the Task 3 and Task 4 work, the spreadsheet column definitions are included immediately before the actual spreadsheet pages and are listed as ''Sample Calculations/Column Definitions'' in the table of contents. Appendix D includes the chronological order in which the experiments were conducted and the final project costs through October 1998. Appendix E is a compilation of the monthly progress reports submitted to INEEL during the course of the project.

  20. Safety of high speed magnetic levitation transportation systems. Magnetic field testing of the TR07 Maglev vehicle and system. Volume 2: Appendices

    Science.gov (United States)

    Dietrich, Fred; Robertson, David; Steiner, George

    1992-04-01

    The safety of various magnetically levitated (maglev) and high speed rail (HSR) trains proposed for application in the United States is of direct concern to the Federal Railroad Administration (FRA). The characterization of electric and magnetic fields (EMF) emissions, both steady (dc) and produced by alternating current (ac) at power frequency (50 Hz in Europe and 60 Hz in the U.S.) and other frequencies in the Extreme Low Frequency (ELF) range (3-3000 Hz), and associated public and worker exposures to EMF, are a growing health and safety concern worldwide. As part of a comprehensive safety assessment of the German TransRapid (TR-07) maglev system undertaken by the FRA, with technical support from the DOT/RSPA Volpe National Transportation System Center (VNTSC), magnetic field measurements were performed by Electric Research and Management, Inc. (ERM) at the Transrapid Test Facility (TVE) in Emsland, Germany in August, 1990. Appendices include catalogs and documents detailing magnetic field data files and their specifics (static fields, spectral waveforms, and temporal and spatial information) by location.

  1. Safety of high speed magnetic levitation transportation systems. Magnetic field testing of the TR07 Maglev vehicle and system. Volume 1: Analysis

    Science.gov (United States)

    Dietrich, Fred; Feero, William E.

    1992-04-01

    The safety of various magnetically levitated (maglev) and high speed rail (HSR) trains proposed for application in the United States is of direct concern to the Federal Railroad Administration (FRA). The characterization of electric and magnetic field (EMF) emissions, both steady (dc) and produced by alternating currents (ac) at power frequency (50 Hz in Europe and 60 Hz in the U.S.) and other frequencies in the Extreme Low Frequency (ELF) range (3-3000 Hz), and associated public and worker exposure to EMF, are a growing health and safety concern worldwide. As part of a comprehensive safety assessment of the German TransRapid (TR-07) maglev system undertaken by the FRA, with technical support from the DOT/RSPA Volpe National Transportation System Center (VNTSC), magnetic field measurements were performed by Electric Research and Management, Inc. (ERM) at the Transrapid Test Facility (TVE) in Emsland, Germany in August, 1990. Analysis summarizes the experimental findings and compares results to common home, work, and power lines emissions for selected spectral bands.

  2. Investigation and performance tests of a new parallel plate ionization chamber with double sensitive volume for measuring diagnostic X-rays

    Science.gov (United States)

    Sharifi, B.; Zamani Zeinali, H.; Soltani, J.; Negarestani, A.; Shahvar, A.

    2015-01-01

    Medical diagnostic equipment, like diagnostic radiology and mammography require a dosimeter with high accuracy for dosimetry of the diagnostic X-ray beam. Ionization chambers are suitable instruments for dosimetry of diagnostic-range X-ray beams because of their appropriate response and high reliability. This work introduces the design and fabrication of a new parallel plate ionization chamber with a PMMA body, graphite-coated PMMA windows (0.5 mm thick) and a graphite-foil central electrode (0.1 mm thick, 0.7 g/cm3 dense). This design improves upon the response characteristics of existing designs through the specific choice of materials as well as the appropriate size and arrangement of the ionization chamber components. The results of performance tests conducted at the Secondary Standard Dosimetry laboratory in Karaj-Iran demonstrated the short and long-term stability, the low leakage current, the low directional dependence, and the high ion collection efficiency of the design. Furthermore, the FLUKA Monte Carlo simulations confirmed the low effect of central electrode on this new ionization chamber response. The response characteristics of the parallel plate ionization chamber presented in this work makes the instrument suitable for use as a standard dosimeter in laboratories.

  3. Investigation and performance tests of a new parallel plate ionization chamber with double sensitive volume for measuring diagnostic X-rays

    Energy Technology Data Exchange (ETDEWEB)

    Sharifi, B., E-mail: babak_sharifi88@yahoo.com [Graduate University of Advanced Technology, Kerman (Iran, Islamic Republic of); Zamani Zeinali, H. [Application of Radiation Research School, Nuclear Science and Technology Research Institute, AEOI, Karaj (Iran, Islamic Republic of); Soltani, J.; Negarestani, A. [Graduate University of Advanced Technology, Kerman (Iran, Islamic Republic of); Shahvar, A. [Application of Radiation Research School, Nuclear Science and Technology Research Institute, AEOI, Karaj (Iran, Islamic Republic of)

    2015-01-11

    Medical diagnostic equipment, like diagnostic radiology and mammography require a dosimeter with high accuracy for dosimetry of the diagnostic X-ray beam. Ionization chambers are suitable instruments for dosimetry of diagnostic-range X-ray beams because of their appropriate response and high reliability. This work introduces the design and fabrication of a new parallel plate ionization chamber with a PMMA body, graphite-coated PMMA windows (0.5 mm thick) and a graphite-foil central electrode (0.1 mm thick, 0.7 g/cm{sup 3} dense). This design improves upon the response characteristics of existing designs through the specific choice of materials as well as the appropriate size and arrangement of the ionization chamber components. The results of performance tests conducted at the Secondary Standard Dosimetry laboratory in Karaj-Iran demonstrated the short and long-term stability, the low leakage current, the low directional dependence, and the high ion collection efficiency of the design. Furthermore, the FLUKA Monte Carlo simulations confirmed the low effect of central electrode on this new ionization chamber response. The response characteristics of the parallel plate ionization chamber presented in this work makes the instrument suitable for use as a standard dosimeter in laboratories.

  4. Evaluating an Integrated Approach to the Management of Cerebral Palsy. Appendix B: Field Test Report of the Eau Claire Functional Abilities Test and the Wolfe-Bluel Socialization Inventory. Volume III of IV. Final Report.

    Science.gov (United States)

    Heal, Laird W.

    The appendix examined the measurement instruments developed in the course of the Integrated Management of Cerebral Palsy project to measure functional movements and socialization skills of severly handicapped, nonambulatory cerebral palsied children who had limited speech. The field test sample consisted of 51 cases for the Eau Claire Functional…

  5. T-F and S/DOE Gladys McCall No. 1 well, Cameron Parish, Louisiana. Geopressured-geothermal well report, Volume II. Well workover and production testing, February 1982-October 1985. Final report. Part 1

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    The T-F and S/DOE Gladys McCall No. 1 well was the fourth in a series of wells in the DOE Design Wells Program that were drilled into deep, large geopressured-geothermal brine aquifers in order to provide basic data with which to determine the technological and economic viability of producing energy from these unconventional resources. This brine production well was spudded on May 27, 1981 and drilling operations were completed on November 2, 1981 after using 160 days of rig time. The well was drilled to a total depth of 16,510 feet. The target sands lie at a depth of 14,412 to 15,860 feet in the Fleming Formation of the lower Miocene. This report covers well production testing operations and necessary well workover operations during the February 1982 to October 1985 period. The primary goals of the well testing program were: (1) to determine reservoir size, shape, volume, drive mechanisms, and other reservoir parameters, (2) to determine and demonstrate the technological and economic viability of producing energy from a geopressured-geothermal brine aquifer through long-term production testing, and (3) to determine problem areas associated with such long-term production, and to develop solutions therefor.

  6. First Industrial Tests of a Drum Monitor Matrix Correction for the Fissile Mass Measurement in Large Volume Historic Metallic Residues with the Differential Die-away Technique

    Energy Technology Data Exchange (ETDEWEB)

    Antoni, R.; Passard, C.; Perot, B.; Batifol, M.; Vandamme, J.C. [CEA, DEN, Cadarache, Nuclear Measurement Laboratory, F-13108 St Paul-lez-Durance, (France); Grassi, G. [AREVA NC, 1 place Jean-Millier, 92084 Paris-La-Defense cedex (France)

    2015-07-01

    The fissile mass in radioactive waste drums filled with compacted metallic residues (spent fuel hulls and nozzles) produced at AREVA La Hague reprocessing plant is measured by neutron interrogation with the Differential Die-away measurement Technique (DDT. In the next years, old hulls and nozzles mixed with Ion-Exchange Resins will be measured. The ion-exchange resins increase neutron moderation in the matrix, compared to the waste measured in the current process. In this context, the Nuclear Measurement Laboratory (NML) of CEA Cadarache has studied a matrix effect correction method, based on a drum monitor ({sup 3}He proportional counter inside the measurement cavity). A previous study performed with the NML R and D measurement cell PROMETHEE 6 has shown the feasibility of method, and the capability of MCNP simulations to correctly reproduce experimental data and to assess the performances of the proposed correction. A next step of the study has focused on the performance assessment of the method on the industrial station using numerical simulation. A correlation between the prompt calibration coefficient of the {sup 239}Pu signal and the drum monitor signal was established using the MCNPX computer code and a fractional factorial experimental design composed of matrix parameters representative of the variation range of historical waste. Calculations have showed that the method allows the assay of the fissile mass with an uncertainty within a factor of 2, while the matrix effect without correction ranges on 2 decades. In this paper, we present and discuss the first experimental tests on the industrial ACC measurement system. A calculation vs. experiment benchmark has been achieved by performing dedicated calibration measurement with a representative drum and {sup 235}U samples. The preliminary comparison between calculation and experiment shows a satisfactory agreement for the drum monitor. The final objective of this work is to confirm the reliability of the

  7. Blunted autonomic response to volume expansion in formerly preeclamptic women with low plasma volume.

    NARCIS (Netherlands)

    Krabbendam, I.; Courtar, D.A.; Janssen, B.J.; Aardenburg, R.; Peeters, L.L.; Spaanderman, M.E.A.

    2009-01-01

    OBJECTIVE: We hypothesize that low plasma volume in normotensive formerly preeclamptic women reflects reduced venous storage capacity. To test this hypothesis, we compared circulatory and autonomic responses to acute volume loading between women with low and those with normal plasma volume. METHODS:

  8. Family Housing Metering Test. A Test Program to Determine the Feasibility of Installing Utility Meters in Military Family Housing, Developing Energy Ceilings, and Operating a Penalty Billing System for Occupants Who Overconsume Energy. Volume II. Appendices.

    Science.gov (United States)

    1980-03-01

    0026 RALW (30., M 1900)) IY, DDUlA( 1) 4002? IF( IY RIE. IMRE) GO TO 1050 00028 ICVE I 90029 Z CWLE I 00030 I-(DDUPI( 1) .EQ. UI’) ICqE z 90031 GO TO 9990...Govermnent Cost Above Energy Norm 12. This Is A Test. Do Not Pay. )Q MOCK UTILITY BILL Name John R. Smith Date of Current Reading 15 Feb 78 - Address 13

  9. The 2006 Brown Center Report on American Education: How Well Are American Students Learning? With Special Sections on the Nation's Achievement, the Happiness Factor in Learning, and Honesty in State Test Scores. Volume II, Number 1

    Science.gov (United States)

    Loveless, Tom

    2006-01-01

    This report launches the second volume of the Brown Center Report on American Education. The five issues of volume one were published from 2000 to 2004. Volume one included regular reports on data from the National Assessment of Educational Progress (NAEP) and state assessments, analysis of student achievement in charter schools, a study of trends…

  10. Least Cost Test Profile. Volume I.

    Science.gov (United States)

    1982-04-01

    Clark AB on mobile medical facilities. These facilities are utilizing 20’ ISO’s for the clinic, laboratory, pharmacy, X-ray, surgery, pre-op and dental ...S-55286D CP 550100-E MIL-STD-XXXX CORE MATERIALl - 4.6.1 4.2.1.3.2.3 DENSITY - 4.6.1.1 COMPRESSIVE STRENGTH - 4.6.1.2 4.2.1.3.2.3 a(4) SHEAR STRENGTH

  11. Least Cost Test Profile. Volume II.

    Science.gov (United States)

    1982-04-01

    16 0 FORDING 4.6.32 * 2,500 3 19ROOF ACCESS STEPS 4.6.28 200 1 16 DROPS 4.6.23 0 16 24 0 DOES NOT IN- CLUDE COST OF EMI DUMMY LOADS. SUPPRESSION...Adks, 0.L and ,aWe em, J.C., "niouveB Sonding fwr Sheltems," University * ~~Of ORYto Rsearch Institute Interim Technsical Report. Contract Mse. F=1S

  12. Data collection system. Volume 1, Overview and operators manual; Volume 2, Maintenance manual; Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Caudell, R.B.; Bauder, M.E.; Boyer, W.B.; French, R.E.; Isidoro, R.J.; Kaestner, P.C.; Perkins, W.G.

    1993-09-01

    Sandia National Laboratories (SNL) Instrumentation Development Department was tasked by the Defense Nuclear Agency (DNA) to record data on Tektronix RTD720 Digitizers on the HUNTERS TROPHY field test conducted at the Nevada Test Site (NTS) on September 18, 1992. This report contains a overview and description of the computer hardware and software that was used to acquire, reduce, and display the data. The document is divided into two volumes: an overview and operators manual (Volume 1) and a maintenance manual (Volume 2).

  13. Tensile testing

    CERN Document Server

    2004-01-01

    A complete guide to the uniaxial tensile test, the cornerstone test for determining the mechanical properties of materials: Learn ways to predict material behavior through tensile testing. Learn how to test metals, alloys, composites, ceramics, and plastics to determine strength, ductility and elastic/plastic deformation. A must for laboratory managers, technicians, materials and design engineers, and students involved with uniaxial tensile testing. Tensile Testing , Second Edition begins with an introduction and overview of the test, with clear explanations of how materials properties are determined from test results. Subsequent sections illustrate how knowledge gained through tensile tests, such as tension properties to predict the behavior (including strength, ductility, elastic or plastic deformation, tensile and yield strengths) have resulted in improvements in materals applications. The Second Edition is completely revised and updated. It includes expanded coverage throughout the volume on a variety of ...

  14. Large volume cryogenic silicon detectors

    Energy Technology Data Exchange (ETDEWEB)

    Braggio, C. [Dipartimento di Fisica, Universita di Padova, via Marzolo 8, 35131 Padova (Italy); Boscardin, M. [Fondazione Bruno Kessler (FBK), via Sommarive 18, I-38100 Povo (Italy); Bressi, G. [INFN sez. di Pavia, via Bassi 6, 27100 Pavia (Italy); Carugno, G.; Corti, D. [INFN sez. di Padova, via Marzolo 8, 35131 Padova (Italy); Galeazzi, G. [INFN lab. naz. Legnaro, viale dell' Universita 2, 35020 Legnaro (Italy); Zorzi, N. [Fondazione Bruno Kessler (FBK), via Sommarive 18, I-38100 Povo (Italy)

    2009-12-15

    We present preliminary measurements for the development of a large volume silicon detector to detect low energy and low rate energy depositions. The tested detector is a one cm-thick silicon PIN diode with an active volume of 31 cm{sup 3}, cooled to the liquid helium temperature to obtain depletion from thermally-generated free carriers. A thorough study has been done to show that effects of charge trapping during drift disappears at a bias field value of the order of 100V/cm.

  15. Ovarian volume throughout life

    DEFF Research Database (Denmark)

    Kelsey, Thomas W; Dodwell, Sarah K; Wilkinson, A Graham

    2013-01-01

    cancer. To date there is no normative model of ovarian volume throughout life. By searching the published literature for ovarian volume in healthy females, and using our own data from multiple sources (combined n=59,994) we have generated and robustly validated the first model of ovarian volume from...... to about 2.8 mL (95% CI 2.7-2.9 mL) at the menopause and smaller volumes thereafter. Our model allows us to generate normal values and ranges for ovarian volume throughout life. This is the first validated normative model of ovarian volume from conception to old age; it will be of use in the diagnosis...

  16. What Are Lung Function Tests?

    Science.gov (United States)

    ... include tests that measure lung size and air flow, such as spirometry and lung volume tests. Other tests measure how well gases such as oxygen get in and out of your blood. These tests include pulse oximetry and arterial blood ...

  17. Mean nuclear volume

    DEFF Research Database (Denmark)

    Mogensen, O.; Sørensen, Flemming Brandt; Bichel, P.

    1999-01-01

    We evaluated the following nine parameters with respect to their prognostic value in females with endometrial cancer: four stereologic parameters [mean nuclear volume (MNV), nuclear volume fraction, nuclear index and mitotic index], the immunohistochemical expression of cancer antigen (CA125...

  18. Battalion Combat Operations Center (COC) Test. Volume 1. Test Plan.

    Science.gov (United States)

    1981-10-09

    lead elements of the motorized regiment and tank bat- talion arrived at Lake Elsinore . An additional MB and artillery battery were located in Perris...in the Lake .Tahoe area commenced movement to the south and was expected to reinforce on or about 27 November. On D 9, M:G-25 photo aircraft escorted...readouts indicated heavy vehicular activity in the vicinity of Perris and Elsinore . These indicators clearly showed enemy forces were preparing to

  19. Influence of insufficient blood specimens volume on the detection results of coagulation tests in SD rats%SD 大鼠标本血量不足对凝血四项检测结果的影响

    Institute of Scientific and Technical Information of China (English)

    翟青新; 黄爱军; 钱丽萍

    2015-01-01

    目的:探讨大鼠的最佳抗凝比,分析标本血量不足对凝血四项检测结果的影响。方法60只大鼠分成2组,按真空采血法采集空腹12 h腹主动脉血液。第一组20只,用于全血细胞测定。全自动血液细胞计数仪检测红细胞压积(hematocrit,HCT),血小板计数(platelet,PLT)。第二组40只,每只鼠采2管血,按抗凝比[枸橼酸钠抗凝剂与全血的比例(V∶V)]分成1∶9(对照组)及1∶5(实验组),1∶8(实验组)及1∶7(实验组),离心获乏血小板血浆。全自动血凝分析仪检测凝血四项:凝血酶原时间(prothrombin time,PT)、活化部分凝血活酶时间(activated partial thromboplatin time,APTT)、凝血酶时间(thrombin time,TT)、纤维蛋白原(Fibrinogen,FIB)。结果 SD大鼠HCT(%)为41.7±2.9,PLT(×109/L)为1114±173。随着抗凝比的增大,PT、APTT、TT延长,FIB减小。与对照组相比:1∶8实验组,差异无统计学意义。1∶7实验组,除TT差异有统计学意义外,另3项指标差异无统计学意义。1∶5实验组,差异有统计学意义。结论凝血四项的结果受抗凝比的影响。1∶9是大鼠最佳抗凝比,1∶8尚可。大鼠有其独特的生理特性。为大鼠的相关研究提供了基础的科学数据和基本的理论依据。%Objective To explore the best anticoagulant ratio in SD rats .To analyse the influence of insufficient blood specimens volume on coagulation tests .Methods 60 rats were divided into 2 groups.According to the method of vacuum blood, collect abdominal aortic blood after fasting 12 hours.The first group 20 rats were used only for routine blood test.Fully automatic hematology analyzer detected hematocrit and platelet .The second group 40 rats were used for coagulation test .Every rat was collected 2 blood specimens with different anticoagulant ratio [ the proportion of sodium citrate anticoagulation and the

  20. Tumor Volumes and Prognosis in Laryngeal Cancer

    Directory of Open Access Journals (Sweden)

    Mohamad R. Issa

    2015-11-01

    Full Text Available Tumor staging systems for laryngeal cancer (LC have been developed to assist in estimating prognosis after treatment and comparing treatment results across institutions. While the laryngeal TNM system has been shown to have prognostic information, varying cure rates in the literature have suggested concern about the accuracy and effectiveness of the T-classification in particular. To test the hypothesis that tumor volumes are more useful than T classification, we conducted a retrospective review of 78 patients with laryngeal cancer treated with radiation therapy at our institution. Using multivariable analysis, we demonstrate the significant prognostic value of anatomic volumes in patients with previously untreated laryngeal cancer. In this cohort, primary tumor volume (GTVP, composite nodal volumes (GTVN and composite total volume (GTVP + GTVN = GTVC had prognostic value in both univariate and multivariate cox model analysis. Interestingly, when anatomic volumes were measured from CT scans after a single cycle of induction chemotherapy, all significant prognosticating value for measured anatomic volumes was lost. Given the literature findings and the results of this study, the authors advocate the use of tumor anatomic volumes calculated from pretreatment scans to supplement the TNM staging system in subjects with untreated laryngeal cancer. The study found that tumor volume assessment after induction chemotherapy is not of prognostic significance.

  1. Tumor Volumes and Prognosis in Laryngeal Cancer

    Science.gov (United States)

    Issa, Mohamad R.; Samuels, Stuart E.; Bellile, Emily; Shalabi, Firas L.; Eisbruch, Avraham; Wolf, Gregory

    2015-01-01

    Tumor staging systems for laryngeal cancer (LC) have been developed to assist in estimating prognosis after treatment and comparing treatment results across institutions. While the laryngeal TNM system has been shown to have prognostic information, varying cure rates in the literature have suggested concern about the accuracy and effectiveness of the T-classification in particular. To test the hypothesis that tumor volumes are more useful than T classification, we conducted a retrospective review of 78 patients with laryngeal cancer treated with radiation therapy at our institution. Using multivariable analysis, we demonstrate the significant prognostic value of anatomic volumes in patients with previously untreated laryngeal cancer. In this cohort, primary tumor volume (GTVP), composite nodal volumes (GTVN) and composite total volume (GTVP + GTVN = GTVC) had prognostic value in both univariate and multivariate cox model analysis. Interestingly, when anatomic volumes were measured from CT scans after a single cycle of induction chemotherapy, all significant prognosticating value for measured anatomic volumes was lost. Given the literature findings and the results of this study, the authors advocate the use of tumor anatomic volumes calculated from pretreatment scans to supplement the TNM staging system in subjects with untreated laryngeal cancer. The study found that tumor volume assessment after induction chemotherapy is not of prognostic significance. PMID:26569309

  2. Volume Regulated Channels

    DEFF Research Database (Denmark)

    Klausen, Thomas Kjær

    - serves a multitude of functions in the mammalian cell, regulating the membrane potential (Em), cell volume, protein activity and the driving force for facilitated transporters giving Cl- and Cl- channels a major potential of regulating cellular function. These functions include control of the cell cycle...... of volume perturbations evolution have developed system of channels and transporters to tightly control volume homeostasis. In the past decades evidence has been mounting, that the importance of these volume regulated channels and transporters are not restricted to the defense of cellular volume......, controlled cell death and cellular migration. Volume regulatory mechanisms has long been in focus for regulating cellular proliferation and my thesis work have been focusing on the role of Cl- channels in proliferation with specific emphasis on ICl, swell. Pharmacological blockage of the ubiquitously...

  3. Precision volume measurement system.

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Erin E.; Shugard, Andrew D.

    2004-11-01

    A new precision volume measurement system based on a Kansas City Plant (KCP) design was built to support the volume measurement needs of the Gas Transfer Systems (GTS) department at Sandia National Labs (SNL) in California. An engineering study was undertaken to verify or refute KCP's claims of 0.5% accuracy. The study assesses the accuracy and precision of the system. The system uses the ideal gas law and precise pressure measurements (of low-pressure helium) in a temperature and computer controlled environment to ratio a known volume to an unknown volume.

  4. Displacement compressors - acceptance tests

    CERN Document Server

    International Organization for Standardization. Geneva

    1996-01-01

    ISO 1217:2009 specifies methods for acceptance tests regarding volume rate of flow and power requirements of displacement compressors. It also specifies methods for testing liquid-ring type compressors and the operating and testing conditions which apply when a full performance test is specified.

  5. Height Extraction and Stand Volume Estimation Based on Fusion Airborne LiDAR Data and Terrestrial Measurements for a Norway Spruce [Picea abies (L. Karst.] Test Site in Romania

    Directory of Open Access Journals (Sweden)

    Bogdan APOSTOL

    2016-06-01

    Full Text Available The objective of this study was to analyze the efficiency of individual tree identification and stand volume estimation from LiDAR data. The study was located in Norway spruce [Picea abies (L. Karst.] stands in southwestern Romania and linked airborne laser scanning (ALS with terrestrial measurements through empirical modelling. The proposed method uses the Canopy Maxima algorithm for individual tree detection together with biometric field measurements and individual trees positioning. Field data was collected using Field-Map real-time GIS-laser equipment, a high-accuracy GNSS receiver and a Vertex IV ultrasound inclinometer. ALS data were collected using a Riegl LMS-Q560 instrument and processed using LP360 and Fusion software to extract digital terrain, surface and canopy height models. For the estimation of tree heights, number of trees and tree crown widths from the ALS data, the Canopy Maxima algorithm was used together with local regression equations relating field-measured tree heights and crown widths at each plot. When compared to LiDAR detected trees, about 40-61% of the field-measured trees were correctly identified. Such trees represented, in general, predominant, dominant and co-dominant trees from the upper canopy. However, it should be noted that the volume of the correctly identified trees represented 60-78% of the total plot volume. The estimation of stand volume using the LiDAR data was achieved by empirical modelling, taking into account the individual tree heights (as identified from the ALS data and the corresponding ground reference stem volume. The root mean square error (RMSE between the individual tree heights measured in the field and the corresponding heights identified in the ALS data was 1.7-2.2 meters. Comparing the ground reference estimated stem volume (at trees level with the corresponding ALS estimated tree stem volume, an RMSE of 0.5-0.7 m3 was achieved. The RMSE was slightly lower when comparing the ground

  6. Coal slurry combustion and technology. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Volume II contains papers presented at the following sessions of the Coal Slurry Combustion and Technology Symposium: (1) bench-scale testing; (2) pilot testing; (3) combustion; and (4) rheology and characterization. Thirty-three papers have been processed for inclusion in the Energy Data Base. (ATT)

  7. Variable volume combustor

    Energy Technology Data Exchange (ETDEWEB)

    Ostebee, Heath Michael; Ziminsky, Willy Steve; Johnson, Thomas Edward; Keener, Christopher Paul

    2017-01-17

    The present application provides a variable volume combustor for use with a gas turbine engine. The variable volume combustor may include a liner, a number of micro-mixer fuel nozzles positioned within the liner, and a linear actuator so as to maneuver the micro-mixer fuel nozzles axially along the liner.

  8. Prediction of forage intake using in vitro gas production methods: Comparison of multiphase fermentation kinetics measured in an automated gas test, and combined gas volume and substrate degradability measurements in a manual syringe system

    NARCIS (Netherlands)

    Blümmel, M.; Cone, J.W.; Gelder, van A.H.; Nshalai, I.; Umunna, N.N.; Makkar, H.P.S.; Becker, K.

    2005-01-01

    This study investigated two approaches to in vitro analysis of gas production data, being a three phase model with long (¿72 h) incubation times, to obtain kinetics and asymptotic values of gas production, and combination of gas volume measurements with residue determinations after a relatively shor

  9. Tested Studies for Laboratory Teaching. Proceedings. Workshop/Conference of the Association for Biology Laboratory Education (ABLE) (11th, Fredericton, New Brunswick, Canada, June 12-16, 1989). Volume 11.

    Science.gov (United States)

    Goldman, Corey A., Ed.

    The focus of the Association for Biology Laboratory Education (ABLE) is to improve the undergraduate biology laboratory experience by promoting the development and dissemination of interesting, innovative, and reliable laboratory exercises. This proceedings volume contains 10 papers: "Investigating Fungi Which Cause Rot and Decay" (J. A Johnson);…

  10. Finite-volume scheme for anisotropic diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Es, Bram van, E-mail: bramiozo@gmail.com [Centrum Wiskunde & Informatica, P.O. Box 94079, 1090GB Amsterdam (Netherlands); FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, The Netherlands" 1 (Netherlands); Koren, Barry [Eindhoven University of Technology (Netherlands); Blank, Hugo J. de [FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, The Netherlands" 1 (Netherlands)

    2016-02-01

    In this paper, we apply a special finite-volume scheme, limited to smooth temperature distributions and Cartesian grids, to test the importance of connectivity of the finite volumes. The area of application is nuclear fusion plasma with field line aligned temperature gradients and extreme anisotropy. We apply the scheme to the anisotropic heat-conduction equation, and compare its results with those of existing finite-volume schemes for anisotropic diffusion. Also, we introduce a general model adaptation of the steady diffusion equation for extremely anisotropic diffusion problems with closed field lines.

  11. Volume Regulated Channels

    DEFF Research Database (Denmark)

    Klausen, Thomas Kjær

    of volume perturbations evolution have developed system of channels and transporters to tightly control volume homeostasis. In the past decades evidence has been mounting, that the importance of these volume regulated channels and transporters are not restricted to the defense of cellular volume...... but are also essential for a number of physiological processes such as proliferation, controlled cell death, migration and endocrinology. The thesis have been focusing on two Channels, namely the swelling activated Cl- channel (ICl, swell) and the transient receptor potential Vanilloid (TRPV4) channel. I: Cl......- serves a multitude of functions in the mammalian cell, regulating the membrane potential (Em), cell volume, protein activity and the driving force for facilitated transporters giving Cl- and Cl- channels a major potential of regulating cellular function. These functions include control of the cell cycle...

  12. Volume regulation in epithelia

    DEFF Research Database (Denmark)

    Larsen, Erik Hviid; Hoffmann, Else Kay

    2016-01-01

    function of iso-osmotic fluid transport that depends on Na+ recirculation. The causative relationship is discussed for a fluid-absorbing and a fluid-secreting epithelium of which the Na+ recirculation mechanisms have been identified. A large number of transporters and ion channels involved in cell volume...... regulation are cloned. The volume-regulated anion channel (VRAC) exhibiting specific electrophysiological characteristics seems exclusive to serve cell volume regulation. This is contrary to K+ channels as well as cotransporters and exchange mechanisms that may serve both transepithelial transport and cell...

  13. Towards the Amplituhedron Volume

    CERN Document Server

    Ferro, Livia; Orta, Andrea; Parisi, Matteo

    2015-01-01

    It has been recently conjectured that scattering amplitudes in planar N=4 super Yang-Mills are given by the volume of the (dual) amplituhedron. In this paper we show some interesting connections between the tree-level amplituhedron and a special class of differential equations. In particular we demonstrate how the amplituhedron volume for NMHV amplitudes is determined by these differential equations. The new formulation allows for a straightforward geometric description, without any reference to triangulations. Finally we discuss possible implications for volumes related to generic N^kMHV amplitudes.

  14. Unsteady flow volumes

    Energy Technology Data Exchange (ETDEWEB)

    Becker, B.G.; Lane, D.A.; Max, N.L.

    1995-03-01

    Flow volumes are extended for use in unsteady (time-dependent) flows. The resulting unsteady flow volumes are the 3 dimensional analog of streamlines. There are few examples where methods other than particle tracing have been used to visualize time varying flows. Since particle paths can become convoluted in time there are additional considerations to be made when extending any visualization technique to unsteady flows. We will present some solutions to the problems which occur in subdivision, rendering, and system design. We will apply the unsteady flow volumes to a variety of field types including moving multi-zoned curvilinear grids.

  15. Bronchoscopic lung volume reduction

    Directory of Open Access Journals (Sweden)

    M. I. Polkey

    2006-12-01

    Full Text Available Surgical lung volume reduction can improve exercise performance and forced expiratory volume in one second in patients with emphysema. However, the procedure is associated with a 5% mortality rate and a nonresponse rate of 25%. Accordingly, interest has focused on alternative ways of reducing lung volume. Two principle approaches are used: collapse of the diseased area using blockers placed endobronchially and the creation of extrapulmonary pathways. Preliminary data from the former approach suggest that it can be successful and that the magnitude of success is related to reduction in dynamic hyperinflation.

  16. Free volume under shear

    Science.gov (United States)

    Maiti, Moumita; Vinutha, H. A.; Sastry, Srikanth; Heussinger, Claus

    2015-10-01

    Using an athermal quasistatic simulation protocol, we study the distribution of free volumes in sheared hard-particle packings close to, but below, the random-close packing threshold. We show that under shear, and independent of volume fraction, the free volumes develop features similar to close-packed systems — particles self-organize in a manner as to mimick the isotropically jammed state. We compare athermally sheared packings with thermalized packings and show that thermalization leads to an erasure of these structural features. The temporal evolution in particular the opening-up and the closing of free-volume patches is associated with the single-particle dynamics, showing a crossover from ballistic to diffusive behavior.

  17. Integers annual volume 2013

    CERN Document Server

    Landman, Bruce

    2014-01-01

    ""Integers"" is a refereed online journal devoted to research in the area of combinatorial number theory. It publishes original research articles in combinatorics and number theory. This work presents all papers of the 2013 volume in book form.

  18. Renormalized Volumes with Boundary

    CERN Document Server

    Gover, A Rod

    2016-01-01

    We develop a general regulated volume expansion for the volume of a manifold with boundary whose measure is suitably singular along a separating hypersurface. The expansion is shown to have a regulator independent anomaly term and a renormalized volume term given by the primitive of an associated anomaly operator. These results apply to a wide range of structures. We detail applications in the setting of measures derived from a conformally singular metric. In particular, we show that the anomaly generates invariant (Q-curvature, transgression)-type pairs for hypersurfaces with boundary. For the special case of anomalies coming from the volume enclosed by a minimal hypersurface ending on the boundary of a Poincare--Einstein structure, this result recovers Branson's Q-curvature and corresponding transgression. When the singular metric solves a boundary version of the constant scalar curvature Yamabe problem, the anomaly gives generalized Willmore energy functionals for hypersurfaces with boundary. Our approach ...

  19. Environmental chemistry: Volume A

    Energy Technology Data Exchange (ETDEWEB)

    Yen, T.F.

    1999-08-01

    This is an extensive introduction to environmental chemistry for engineering and chemical professionals. The contents of Volume A include a brief review of basic chemistry prior to coverage of litho, atmo, hydro, pedo, and biospheres.

  20. Generalized Partial Volume

    DEFF Research Database (Denmark)

    Darkner, Sune; Sporring, Jon

    2011-01-01

    Mutual Information (MI) and normalized mutual information (NMI) are popular choices as similarity measure for multimodal image registration. Presently, one of two approaches is often used for estimating these measures: The Parzen Window (PW) and the Generalized Partial Volume (GPV). Their theoret......Mutual Information (MI) and normalized mutual information (NMI) are popular choices as similarity measure for multimodal image registration. Presently, one of two approaches is often used for estimating these measures: The Parzen Window (PW) and the Generalized Partial Volume (GPV...

  1. Reachable volume RRT

    KAUST Repository

    McMahon, Troy

    2015-05-01

    © 2015 IEEE. Reachable volumes are a new technique that allows one to efficiently restrict sampling to feasible/reachable regions of the planning space even for high degree of freedom and highly constrained problems. However, they have so far only been applied to graph-based sampling-based planners. In this paper we develop the methodology to apply reachable volumes to tree-based planners such as Rapidly-Exploring Random Trees (RRTs). In particular, we propose a reachable volume RRT called RVRRT that can solve high degree of freedom problems and problems with constraints. To do so, we develop a reachable volume stepping function, a reachable volume expand function, and a distance metric based on these operations. We also present a reachable volume local planner to ensure that local paths satisfy constraints for methods such as PRMs. We show experimentally that RVRRTs can solve constrained problems with as many as 64 degrees of freedom and unconstrained problems with as many as 134 degrees of freedom. RVRRTs can solve problems more efficiently than existing methods, requiring fewer nodes and collision detection calls. We also show that it is capable of solving difficult problems that existing methods cannot.

  2. Recurrence interval analysis of trading volumes.

    Science.gov (United States)

    Ren, Fei; Zhou, Wei-Xing

    2010-06-01

    We study the statistical properties of the recurrence intervals τ between successive trading volumes exceeding a certain threshold q. The recurrence interval analysis is carried out for the 20 liquid Chinese stocks covering a period from January 2000 to May 2009, and two Chinese indices from January 2003 to April 2009. Similar to the recurrence interval distribution of the price returns, the tail of the recurrence interval distribution of the trading volumes follows a power-law scaling, and the results are verified by the goodness-of-fit tests using the Kolmogorov-Smirnov (KS) statistic, the weighted KS statistic and the Cramér-von Mises criterion. The measurements of the conditional probability distribution and the detrended fluctuation function show that both short-term and long-term memory effects exist in the recurrence intervals between trading volumes. We further study the relationship between trading volumes and price returns based on the recurrence interval analysis method. It is found that large trading volumes are more likely to occur following large price returns, and the comovement between trading volumes and price returns is more pronounced for large trading volumes.

  3. Solderability test system

    Energy Technology Data Exchange (ETDEWEB)

    Yost, Fred (Cedar Crest, NM); Hosking, Floyd M. (Albuquerque, NM); Jellison, James L. (Albuquerque, NM); Short, Bruce (Beverly, MA); Giversen, Terri (Beverly, MA); Reed, Jimmy R. (Austin, TX)

    1998-01-01

    A new test method to quantify capillary flow solderability on a printed wiring board surface finish. The test is based on solder flow from a pad onto narrow strips or lines. A test procedure and video image analysis technique were developed for conducting the test and evaluating the data. Feasibility tests revealed that the wetted distance was sensitive to the ratio of pad radius to line width (l/r), solder volume, and flux predry time.

  4. Solderability test system

    Energy Technology Data Exchange (ETDEWEB)

    Yost, F.; Hosking, F.M.; Jellison, J.L.; Short, B.; Giversen, T.; Reed, J.R.

    1998-10-27

    A new test method to quantify capillary flow solderability on a printed wiring board surface finish. The test is based on solder flow from a pad onto narrow strips or lines. A test procedure and video image analysis technique were developed for conducting the test and evaluating the data. Feasibility tests revealed that the wetted distance was sensitive to the ratio of pad radius to line width (l/r), solder volume, and flux predry time. 11 figs.

  5. 29 CFR 794.119 - Dependence of exemption on sales volume of the enterprise.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Dependence of exemption on sales volume of the enterprise... Act Annual Gross Volume of Sales § 794.119 Dependence of exemption on sales volume of the enterprise... enterprise must be less than $1 million exclusive of excise taxes. This dollar volume test is separate and...

  6. Test plan for composting studies involving weight and volume reduction of leaf and stalk biomass: DOE/OTD TTP{number_sign} SR17SS53 {ampersand} TTP{number_sign} SR18SS41

    Energy Technology Data Exchange (ETDEWEB)

    Wilde, E.W.; Kastner, J.; Murphy, C.; Santo Domingo, J.

    1997-05-28

    SRTC and a panel of experts from off-site previously determined that composting was the most attractive alternative for reducing the volume and weight of biomass that was slightly radioactive. The SRTC proposed scope of work for Subtask 2 of TTP{number_sign} SR17SS53 and TTP{number_sign} SR18SS41 involves bench scale studies to assess the rates and efficiencies of various composting schemes for volume and weight reduction of leaf and stalk biomass (SB). Ultimately, the data will be used to design a composting process for biomass proposed by MSE for phytoremediation studies at SRS. This could drastically reduce costs for transporting and disposing of contaminated biomass resulting from a future major phytoremediation effort for soil clean-up at the site. The composting studies at SRTC includes collaboration with personnel from the University of Georgia, who will conduct chemical analyses of the plant material after harvest, pre-treatment, and composting for specific time periods. Parameters to be measured will include: lignin, hemicellulose, cellulose, carbon and nitrogen. The overall objective of this project is to identify or develop: (1) an inexpensive source of inoculum (consisting of nutrients and/or microorganisms) capable of significantly enhancing biomass degradation, (2) an optimum range of operating parameters for the composting process, and (3) a process design for the solid state degradation of lignocellulosic biomass contaminated with radionuclides that is superior to existing alternatives for dealing with such waste.

  7. Comparison of actual tidal volume in neonatal lung model volume control ventilation using three ventilators.

    Science.gov (United States)

    Toyama, H; Endo, Y; Ejima, Y; Matsubara, M; Kurosawa, S

    2011-07-01

    In neonates, small changes in tidal volumes (V(T)) may lead to complications. Previous studies have shown a significant difference between ventilator-measured tidal volume and tidal volume delivered (actual V(T)). We evaluated the accuracy of three different ventilators to deliver small V(T) during volume-controlled ventilation. We tested Servo 300, 840 ventilator and Evita 4 Neoflow ventilators with lung models simulating normal and injured neonatal lung compliance models. Gas volume delivered from the ventilator into the test circuit (V(TV)) and actual V(T) to the test lung were measured using Ventrak respiration monitors at set V(T) (30 ml). The gas volume increase of the breathing circuit was then calculated. Tidal volumes of the SV300 and PB840 in both lung models were similar to the set V(T) and the actual tidal volumes in the injured model (20.7 ml and 19.8 ml, respectively) were significantly less than that in the normal model (27.4 ml and 23.4 ml). PB840 with circuit compliance compensation could not improve the actual V(T). V(TV) of the EV4N in the normal and the injured models (37.8 ml and 46.6 ml) were markedly increased compared with set V(T), and actual V(T) were similar to set V(T) in the normal and injured model (30.2 ml and 31.9 ml, respectively). EV4N measuring V(T) close to the lung could match actual V(T) to almost the same value as the set V(T) however the gas volume of the breathing circuit was increased. If an accurate value for the patient's actual V(T) is needed, this V(T) must be measured by a sensor located between the Y-piece and the tracheal tube.

  8. Volumes of chain links

    CERN Document Server

    Kaiser, James; Rollins, Clint

    2011-01-01

    Agol has conjectured that minimally twisted n-chain links are the smallest volume hyperbolic manifolds with n cusps, for n at most 10. In his thesis, Venzke mentions that these cannot be smallest volume for n at least 11, but does not provide a proof. In this paper, we give a proof of Venzke's statement. The proof for n at least 60 is completely rigorous. The proof for n between 11 and 59 uses a computer calculation, and can be made rigorous for manifolds of small enough complexity, using methods of Moser and Milley. Finally, we prove that the n-chain link with 2m or 2m+1 half-twists cannot be the minimal volume hyperbolic manifold with n cusps, provided n is at least 60 or |m| is at least 8, and we give computational data indicating this remains true for smaller n and |m|.

  9. HARNESSING BIG DATA VOLUMES

    Directory of Open Access Journals (Sweden)

    Bogdan DINU

    2014-04-01

    Full Text Available Big Data can revolutionize humanity. Hidden within the huge amounts and variety of the data we are creating we may find information, facts, social insights and benchmarks that were once virtually impossible to find or were simply inexistent. Large volumes of data allow organizations to tap in real time the full potential of all the internal or external information they possess. Big data calls for quick decisions and innovative ways to assist customers and the society as a whole. Big data platforms and product portfolio will help customers harness to the full the value of big data volumes. This paper deals with technical and technological issues related to handling big data volumes in the Big Data environment.

  10. Topological Active Volumes

    Directory of Open Access Journals (Sweden)

    Barreira N

    2005-01-01

    Full Text Available The topological active volumes (TAVs model is a general model for 3D image segmentation. It is based on deformable models and integrates features of region-based and boundary-based segmentation techniques. Besides segmentation, it can also be used for surface reconstruction and topological analysis of the inside of detected objects. The TAV structure is flexible and allows topological changes in order to improve the adjustment to object's local characteristics, find several objects in the scene, and identify and delimit holes in detected structures. This paper describes the main features of the TAV model and shows its ability to segment volumes in an automated manner.

  11. Aperiodic Volume Optics

    Science.gov (United States)

    Gerke, Tim D.

    Presented in this thesis is an investigation into aperiodic volume optical devices. The three main topics of research and discussion are the aperiodic volume optical devices that we call computer-generated volume holograms (CGVH), defects within periodic 3D photonic crystals, and non-periodic, but ordered 3D quasicrystals. The first of these devices, CGVHs, are designed and investigated numerically and experimentally. We study the performance of multi-layered amplitude computer-generated volume holograms in terms of efficiency and angular/frequency selectivity. Simulation results show that such aperiodic devices can increase diffraction efficiency relative to periodic amplitude volume holograms while maintaining angular and wavelength selectivity. CGVHs are also designed as voxelated volumes using a new projection optimization algorithm. They are investigated using a volumetric diffraction simulation and a standard 3D beam propagation technique as well as experimentally. Both simulation and experiment verify that the structures function according to their design. These represent the first diffractive structures that have the capacity for generating arbitrary transmission and reflection wave fronts and that provide the ability for multiplexing arbitrary functionality given different illumination conditions. Also investigated and discussed in this thesis are 3D photonic crystals and quasicrystals. We demonstrate that these devices can be fabricated using a femtosecond laser direct writing system that is particularly appropriate for fabrication of such arbitrary 3D structures. We also show that these devices can provide 3D partial bandgaps which could become complete bandgaps if fabricated using high index materials or by coating lower index materials with high index metals. Our fabrication method is particularly suited to the fabrication of engineered defects within the periodic or quasi-periodic systems. We demonstrate the potential for fabricating defects within

  12. The volume of a soliton

    Energy Technology Data Exchange (ETDEWEB)

    Adam, C., E-mail: adam@fpaxp1.usc.es [Departamento de Física de Partículas, Universidad de Santiago de Compostela and Instituto Galego de Física de Altas Enerxias (IGFAE), E-15782 Santiago de Compostela (Spain); Haberichter, M. [School of Mathematics, Statistics and Actuarial Science, University of Kent, Canterbury, CT2 7NF (United Kingdom); Wereszczynski, A. [Institute of Physics, Jagiellonian University, Lojasiewicza 11, Kraków (Poland)

    2016-03-10

    There exists, in general, no unique definition of the size (volume, area, etc., depending on dimension) of a soliton. Here we demonstrate that the geometric volume (area etc.) of a soliton is singled out in the sense that it exactly coincides with the thermodynamical or continuum-mechanical volume. In addition, this volume may be defined uniquely for rather arbitrary solitons in arbitrary dimensions.

  13. Turbine fuels from tar sands bitumen and heavy oil. Volume 1. Phase 3. Pilot plant testing, final design, and economics. Final report, 1 June 1985-31 March 1987

    Energy Technology Data Exchange (ETDEWEB)

    Talbot, A.F.; Carson, T.C.; Magill, L.G.; Swesey, J.R.

    1987-08-01

    Pilot-plant-scale demonstration of an upgrading/refining scheme to convert bitumen or heavy crude oil into high yields of specification-quality aviation turbine fuel was performed. An atmospheric residue from San Ardo (California) crude was converted under hydrovisbreaking conditions to synthetic crude for further refining. Naphtha cuts from the straight run and synthetic crude were combined, catalytically hydrotreated, then hydrocracked. Products from these operations were combined to produce two prototype specification fuels (JP-4 and JP-8) as well as two heavier, variable-quality fuels. An engineering design (Volume II) was developed for a 50,000 BPSD grass-roots refinery, from the pilot-plant operations. Capital investment and operating costs were estimated, and fuel manufacturing costs projected. Conclusions and recommendations for further work are included.

  14. IVUS coronary volume alignment for distinct phases

    Science.gov (United States)

    Matsumoto, Monica Mitiko Soares; Lemos, Pedro Alves; Furuie, Sergio Shiguemi

    2009-02-01

    Image-based intravascular ultrasound (IVUS) cardiac phase detection allows coronary volume reconstruction in different phases. Consecutive volumes are not necessarily spatially aligned due to longitudinal movement of the catheter. Besides ordinary pullback velocity, there is a relative longitudinal movement of the heart vessel walls and the transducer, due to myocardial contraction. In this manuscript, we aim to spatially align cardiac phase coronary IVUS volumes. In addition, we want to investigate this non-linear longitudinal catheter movement. With this purpose, we have analyzed 120 simulated IVUS images and 10 real IVUS pullbacks. We implemented the following methodology. Firstly, we built IVUS volume for each distinct phase. Secondly, each IVUS volume was transformed into a parametric signal of average frame intensity. We have used these signals to make correlation in space with a reference one. Then we estimated the spatial distance between the distinct IVUS volumes and the reference. We have tested in simulated images and real examinations. We have also observed similar pattern in real IVUS examinations. This spatial alignment method is feasible and useful as a step towards dynamic studies of IVUS examination.

  15. Design for volume reduction

    NARCIS (Netherlands)

    Wever, R.; Boks, C.; Stevels, A.

    2007-01-01

    Traditionally packaging design-for-sustainability (DfS) strongly focuses on resource conservation and material recycling. The type and amount of materials used has been the driver in design. For consumer electronics (CE) products this weight-based approach is too limited; a volume-based approach is

  16. Introduction to the Volume.

    Science.gov (United States)

    Emihovich, Catherine; Schroder, Barbara; Panofsky, Carolyn P.

    1999-01-01

    Introduces a volume that examines the issue of critical thinking and whether or not it is culturally specific, discussing recent research on the subject. The papers focus on critical thinking and culture, historical consciousness and critical thinking, critical thinking as cultural-historical practice, culture and the development of critical…

  17. A genetic analysis of brain volumes and IQ in children

    NARCIS (Netherlands)

    Leeuwen, van Marieke; Peper, Jiska S.; Berg, van den Stephanie M.; Brouwer, Rachel M.; Hulshoff Pol, Hilleke E.; Kahn, Rene S.; Boomsma, Dorret I.

    2009-01-01

    In a population-based sample of 112 nine-year old twin pairs, we investigated the association among total brain volume, gray matter and white matter volume, intelligence as assessed by the Raven IQ test, verbal comprehension, perceptual organization and perceptual speed as assessed by the Wechsler I

  18. A genetic analysis of brain volumes and IQ in children

    NARCIS (Netherlands)

    van Leeuwen, Marieke; Peper, Jiska S.; van den Berg, Stephanie M.; Brouwer, Rachel M.; Pol, Hilleke E. Hulshoff; Kahn, Rene S.; Boomsma, Dorret I.

    2009-01-01

    In a population-based sample of 112 nine-year old twin pairs, we investigated the association among total brain volume, gray matter and white matter volume, intelligence as assessed by the Raven IQ test, verbal comprehension. perceptual organization and perceptual speed as assessed by the Wechsler I

  19. A Genetic Analysis of Brain Volumes and IQ in Children

    Science.gov (United States)

    van Leeuwen, Marieke; Peper, Jiska S.; van den Berg, Stephanie M.; Brouwer, Rachel M.; Hulshoff Pol, Hilleke E.; Kahn, Rene S.; Boomsma, Dorret I.

    2009-01-01

    In a population-based sample of 112 nine-year old twin pairs, we investigated the association among total brain volume, gray matter and white matter volume, intelligence as assessed by the Raven IQ test, verbal comprehension, perceptual organization and perceptual speed as assessed by the Wechsler Intelligence Scale for Children-III. Phenotypic…

  20. On infinitesimal increase of volumes of morphological transforms

    DEFF Research Database (Denmark)

    Kiderlen, Markus; Rataj, Jan

    2007-01-01

    Let B (“black”) and W (“white”) be disjoint compact test sets in the d-dimensional Euclidean space and consider the volume of all its simultaneous shifts keeping B inside and W outside a compact set A. If the union of B and W is rescaled by a factor tending to zero, then the rescaled volume conve...

  1. A Genetic Analysis of Brain Volumes and IQ in Children

    Science.gov (United States)

    van Leeuwen, Marieke; Peper, Jiska S.; van den Berg, Stephanie M.; Brouwer, Rachel M.; Hulshoff Pol, Hilleke E.; Kahn, Rene S.; Boomsma, Dorret I.

    2009-01-01

    In a population-based sample of 112 nine-year old twin pairs, we investigated the association among total brain volume, gray matter and white matter volume, intelligence as assessed by the Raven IQ test, verbal comprehension, perceptual organization and perceptual speed as assessed by the Wechsler Intelligence Scale for Children-III. Phenotypic…

  2. A genetic analysis of brain volumes and IQ in children

    NARCIS (Netherlands)

    van Leeuwen, Marieke; Peper, Jiska S.; van den Berg, Stéphanie Martine; Brouwer, Rachel M.; Hulshoff Pol, Hilleke E.; Kahn, Rene S.; Boomsma, Dorret I.

    2009-01-01

    In a population-based sample of 112 nine-year old twin pairs, we investigated the association among total brain volume, gray matter and white matter volume, intelligence as assessed by the Raven IQ test, verbal comprehension, perceptual organization and perceptual speed as assessed by the Wechsler

  3. Acute volume expansion attenuates hyperthermia-induced reductions in cerebral perfusion during simulated hemorrhage

    DEFF Research Database (Denmark)

    Schlader, Zachary J; Seifert, Thomas; Wilson, Thad E

    2013-01-01

    Hyperthermia reduces the capacity to withstand a simulated hemorrhagic challenge, but volume loading preserves this capacity. This study tested the hypotheses that acute volume expansion during hyperthermia increases cerebral perfusion and attenuates reductions in cerebral perfusion during a simu...

  4. The value of volume reaction evaluation through stroke volume variation combined with passive leg test for septic shock patients with autonomous breathing%每搏量变异结合被动抬腿试验在自主呼吸感染性休克患者容量反应评估中的价值研究

    Institute of Scientific and Technical Information of China (English)

    林冰; 蒋丽芳; 孟繁甦; 郭应军

    2014-01-01

    Objective To evaluate the value of PLR-△SVV for the septic shock patients with autonomous breathing. Methods 60 patients were included in the study. Hemodynamic data of PICCO were collected before and after treatment. After rehydration, the group (△SV≥10%) was defined volume responder group, and then the predictive value of PLR-△SVV was analyzed. Results Compared with the nonresponders group, PLR-△SVV was increased significantly in response group[(10 ± 4)mL vs (14 ± 6)mL,P<0.05]. The ROC curve for PLR-△SVV were 0.881, and the sensitivity was 85.7%, the specificity was 92.0%. Conclusion PLR-△SVV can be used to predict fluid responsiveness for septic shock patients with spontaneously breathing.%目的:评估被动抬腿试验(passive leg raising,PLR)后每搏量变异(stroke volume variation,SVV),即PLR-△SVV在自主呼吸感染性休克患者中容量反应的预测价值。方法:患者60例,用 PiCCO 监测 PLR和补液试验前后的血流动力学,补液试验后△SV(stroke volume)≥10%为容量反应组,评价PLR-△SVV预测容量反应的价值。结果:反应组PLR-△SVV明显变化[(10±4)mL vs (14±6)mL,P<0.05],无反应组无明显变化(P>0.05)。 PLR-△SVV预测容量反应的ROC曲线下面积为0.881。以PLR-△SVV≥11.2%评价容量反应性,灵敏度为85.7%,特异度为92.0%。结论:PLR-△SVV可预测自主呼吸感染性休克患者的容量反应。

  5. Triple balance test of the PRR baseline space shuttle configuration on a .004 scale model of the MCR 0074 orbiter configuration in the MSFC 14 x 14 inch Trisonic Wind Tunnel (TWT 570) IA31F(B), volume 1

    Science.gov (United States)

    Ramsey, P. E.; Davis, T. C.

    1974-01-01

    A wind tunnel force and moment test of the space shuttle launch vehicle was conducted. The wind tunnel model utilized a triple balance such that component aerodynamics of the orbiter, external tank, and solid rocket booster was obtained. The test was conducted at an angle of attack range from -10 deg to 10 deg, and angle of sideslip range from -10 deg to 10 deg, and a Mach number range from 0.6 to 4.96. Simulation parameters to be used in future launch vehicle wind tunnel tests were investigated. The following were included: (1) effect of orbiter -ET attach hardware; (2) model attachment (spacer) effects; (3) effects of grit on model leading surfaces; and (4) model misalignment effects. The effects of external tank nose shape was studied by investigating five different nose configurations. Plotted and tabulated data is reported.

  6. The 2012 Brown Center Report on American Education: How Well Are American Students Learning? With Sections on Predicting the Effect of the Common Core State Standards, Achievement Gaps on the Two NAEP Tests, and Misinterpreting International Test Scores. Volume III, Number 1

    Science.gov (United States)

    Loveless, Tom

    2012-01-01

    This edition of the Brown Center Report on American Education marks the first issue of volume three--and eleventh issue over all. The first installment was published in 2000, just as the Presidential campaigns of George W. Bush and Al Gore were winding down. Education was an important issue in that campaign. It has not been thus far in the current…

  7. Performance Concept in Buildings. Volume 1: Invited Papers. Proceedings of a Symposium Jointly Sponsored by the International Union of Testing and Research Laboratories for Materials and Structures (RILEM), the American Society for Testing and Materials (ASTM), and the International Council for Building Research Studies and Documentation (CIB) (Philadelphia, Pennsylvania, May 2-5, 1972).

    Science.gov (United States)

    Foster, Bruce E., Ed.

    Volume 1 contains all the invited papers accepted for the symposium. The subject matter covered in the papers includes physiological, anthropometrical, psychological, sociological, and economic human requirements and methods of evaluation; physical requirements and methods of evaluation in mechanical, acoustical, thermal, dimensional stability,…

  8. Postoperative volume balance

    DEFF Research Database (Denmark)

    Frost, H; Mortensen, C.R.; Secher, Niels H.

    2017-01-01

    In healthy humans, stroke volume (SV) and cardiac output (CO) do not increase with expansion of the central blood volume by head-down tilt or administration of fluid. Here, we exposed 85 patients to Trendelenburg's position about one hour after surgery while cardiovascular variables were determined...... non-invasively by Modelflow. In Trendelenburg's position, SV (83 ± 19 versus 89 ± 20 ml) and CO (6·2 ± 1·8 versus 6·8 ± 1·8 l/min; both Pheart rate (75 ± 15 versus 76 ± 14 b min(-1) ) and mean arterial pressure were unaffected (84 ± 15 versus 84 ± 16 mmHg). For the 33 patients......, determination of SV and/or CO in Trendelenburg's position can be used to evaluate whether a patient is in need of IV fluid as here exemplified after surgery....

  9. To test or not to test?

    DEFF Research Database (Denmark)

    Dessau, Ram B; van Dam, Alje P; Fingerle, Volker

    2017-01-01

    BACKGROUND: Lyme borreliosis (LB) is a tick-borne infection caused by Borrelia burgdorferi sensu lato. The most frequent clinical manifestations are erythema migrans and Lyme neuroborreliosis. Currently, a large volume of diagnostic testing for Lyme borreliosis is reported, whereas the incidence ...

  10. Colloid volume loading does not mitigate decreases in central blood volume during simulated hemorrhage while heat stressed

    DEFF Research Database (Denmark)

    Crandall, Craig G; Wilson, Thad E; Marving, Jens

    2012-01-01

    Heat stress results in profound reductions in the capacity to withstand a simulated hemorrhagic challenge; however, this capacity is normalized if the individual is volume loaded prior to the challenge. The present study tested the hypothesis that volume loading during passive heat stress attenua...

  11. Select Papers. Volume 1

    Science.gov (United States)

    2011-08-01

    non- uniform rational B-splines (NURBS), 127 and BRL-CAD TM format. This dual-package development allowed for rapid development of components ...next generation of scientists and engineers. A fundamental component of our outreach program is to provide students research experiences at ARL...summer intern. There, I ran Volume Based Morphometry , an application of Statistical Parametric Mapping that was new to the Hirsch lab. I

  12. Monitoring and Evaluation of Smolt Migration in the Columbia Basin : Volume VII : Evaluation of the Compliance Testing Framework for RPA Improvement as Stated in the 2000 Federal Columbia River Power System (FCRPS) Biological Opinion.

    Energy Technology Data Exchange (ETDEWEB)

    Skalski, John R.; Ngouenet, Roger F.

    2001-05-01

    Using the pre-2000 reach survival probabilities reported in the 2000 FCRPS Biological Opinion (BO) for three selected stocks: yearling and sub-yearling chinook and steelhead, power curves were constructed for each of the two statistical hypothesis tests suggested in the BO. These power calculation results were interpreted in terms of the ability of the statistical tests to correctly identify the true states of recovery (i.e., fail or succeed in fulfilling RPA expectations). The proposed one-sided tests have a moderate to low probability of correctly assessing the true status of the recovery by the years 2005 and 2008. The relatively poor odds of making the correct decision with the BO proposed Tests 1 and 2 suggest alternative decision rules need to be investigated and developed for assessing RPA compliance. Therefore, we propose to immediately examine alternative decision rules that might maximize the likelihood of correct decisions while minimizing the prospect of incorrect decisions. The Bayesian analysis will incorporate scientific/biological knowledge/expertise.

  13. Small-Volume Injections: Evaluation of Volume Administration Deviation From Intended Injection Volumes.

    Science.gov (United States)

    Muffly, Matthew K; Chen, Michael I; Claure, Rebecca E; Drover, David R; Efron, Bradley; Fitch, William L; Hammer, Gregory B

    2017-10-01

    In the perioperative period, anesthesiologists and postanesthesia care unit (PACU) nurses routinely prepare and administer small-volume IV injections, yet the accuracy of delivered medication volumes in this setting has not been described. In this ex vivo study, we sought to characterize the degree to which small-volume injections (≤0.5 mL) deviated from the intended injection volumes among a group of pediatric anesthesiologists and pediatric postanesthesia care unit (PACU) nurses. We hypothesized that as the intended injection volumes decreased, the deviation from those intended injection volumes would increase. Ten attending pediatric anesthesiologists and 10 pediatric PACU nurses each performed a series of 10 injections into a simulated patient IV setup. Practitioners used separate 1-mL tuberculin syringes with removable 18-gauge needles (Becton-Dickinson & Company, Franklin Lakes, NJ) to aspirate 5 different volumes (0.025, 0.05, 0.1, 0.25, and 0.5 mL) of 0.25 mM Lucifer Yellow (LY) fluorescent dye constituted in saline (Sigma Aldrich, St. Louis, MO) from a rubber-stoppered vial. Each participant then injected the specified volume of LY fluorescent dye via a 3-way stopcock into IV tubing with free-flowing 0.9% sodium chloride (10 mL/min). The injected volume of LY fluorescent dye and 0.9% sodium chloride then drained into a collection vial for laboratory analysis. Microplate fluorescence wavelength detection (Infinite M1000; Tecan, Mannedorf, Switzerland) was used to measure the fluorescence of the collected fluid. Administered injection volumes were calculated based on the fluorescence of the collected fluid using a calibration curve of known LY volumes and associated fluorescence.To determine whether deviation of the administered volumes from the intended injection volumes increased at lower injection volumes, we compared the proportional injection volume error (loge [administered volume/intended volume]) for each of the 5 injection volumes using a linear

  14. CMH-17 Volume 5 Ceramic Matrix Composites

    Science.gov (United States)

    Andrulonis, Rachael; Kiser, J. Douglas; David, Kaia E.; Davies, Curtis; Ashforth, Cindy

    2017-01-01

    A wide range of issues must be addressed during the process of certifying CMC (ceramic matrix composite) components for use in commercial aircraft. The Composite Materials Handbook-17, Volume 5, Revision A on ceramic matrix composites has just been revised to help support FAA certification of CMCs for elevated temperature applications. The handbook supports the development and use of CMCs through publishing and maintaining proven, reliable engineering information and standards that have been thoroughly reviewed. Volume 5 contains detailed sections describing CMC materials processing, design analysis guidelines, testing procedures, and data analysis and acceptance. A review of the content of this latest revision will be presented along with a description of how CMH-17, Volume 5 could be used by the FAA (Federal Aviation Administration) and others in the future.

  15. Formula for Calculating Maintenance Fluid Volumes in Low Birth ...

    African Journals Online (AJOL)

    TNHJOURNALPH

    2007-08-14

    Aug 14, 2007 ... The paired sample T- test, using variation in days and in ... accuracy is validated; having compared .... rapid weight changes would suggest water loss or gain. ..... TABLE 11: Volume In milk [!hr. using the RAW Formula. R.

  16. Aquatic Plant Control Research Program. Large-Scale Operations Management Test (LSOMT) of Insects and Pathogens for Control of Waterhyacinth in Louisiana. Volume 1. Results for 1979-1981.

    Science.gov (United States)

    1985-01-01

    Results for 1979-1981 * 7. AUTHOR(e) 8. CONTRACT OR GRANT NUMBER(s) "’ Dana R. Sanders, Sr. Edwin A. Theriot Patricia Perfetti 9. PERFORMING...Division (ERD), Environmental Laboratory (EL), WES, and Dr. Patricia Perfetti , University of Tennessee-Chattanooga, Chattanooga, Tennessee. The field...Sanders, D. R., Sr., Theriot, E. A., and Perfetti , P. 1985. "Large-Scale Operations Management Test (LSOMT) of Insects and Pathogens for Control

  17. Wind tunnel tests of an 0.019-scale space shuttle integrated vehicle -2A configuration (model 14-OTS) in the NASA Ames 8 X 7 foot unitary wind tunnel, volume 2. [cold jet gas plumes and pressure distribution

    Science.gov (United States)

    Hardin, R. B.; Burrows, R. R.

    1975-01-01

    The purpose of the test was to determine the effects of cold jet gas plumes on (1) the integrated vehicle longitudinal and lateral-directional force data, (2) exposed wing hinge moment, (3) wing pressure distributions, (4) orbiter MPS external pressure distributions, and (5) model base pressures. An investigation was undertaken to determine the similarity between solid and gaseous plumes; fluorescent oil flow visualization studies were also conducted. Plotted wing pressure data is tabulated.

  18. Fiscal 1997 report of the development of high efficiency waste power generation technology. No.2 volume. Pilot plant verification test; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu (pilot plant jissho shiken). 1997 nendo hokokusho (daini bunsatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to a high efficiency waste power generation system using general waste as fuel, the details of the following were described: design/construction management and operational study of pilot plant, design/manufacture/construction of pilot plant, and study of an optimal total system. Concerning the construction management and operational study, the paper described the application for governmental/official inspection procedures and taking inspection, process management of pilot plant, site patrol, safety management, management of trial run of pilot plant, drawing-up of a verification test plan and test run, etc. Relating to the design/manufacture/construction of pilot plant, an outline of the pilot plant was described. The paper also stated points to be considered in design of furnace structure and boiler structure, points to be considered of the verification test, etc. As to the study of an optimal total system, the following were described: survey of waste gasification/slagging power generation technology, basic study on RDF production process, survey of trends of waste power generation technology in the U.S., etc. 52 refs., 149 figs., 121 tabs.

  19. Environmental Report 1996, Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Harrach, R.J.

    1996-01-01

    This is Volume 2 of the Lawrence Livermore National Laboratory`s (LLNL`s) annual Environmental Report 1996, prepared for the US Department of Energy. Volume 2 supports Volume 1 summary data and is essentially a detailed data report that provides individual data points, where applicable. Volume 2 includes information on monitoring of air, air effluents, sewerable water, surface water, ground water, soil and sediment, vegetation and foodstuff, environmental radiation, and quality assurance.

  20. Using Photogrammetry to Estimate Tank Waste Volumes from Video

    Energy Technology Data Exchange (ETDEWEB)

    Field, Jim G. [Washington River Protection Solutions, LLC, Richland, WA (United States)

    2013-03-27

    Washington River Protection Solutions (WRPS) contracted with HiLine Engineering & Fabrication, Inc. to assess the accuracy of photogrammetry tools as compared to video Camera/CAD Modeling System (CCMS) estimates. This test report documents the results of using photogrammetry to estimate the volume of waste in tank 241-C-I04 from post-retrieval videos and results using photogrammetry to estimate the volume of waste piles in the CCMS test video.

  1. REFLECTION AND REFRACTION, VOLUME 2.

    Science.gov (United States)

    KLAUS, DAVID J.; AND OTHERS

    THIS VOLUME 2 OF A TWO-VOLUME SET PROVIDES AUTOINSTRUCTION IN PHYSICS. THE UNITS COVERED IN THIS VOLUME ARE (1) REFLECTION OF LIGHT, (2) PHOTOMETRY, (3) POLARIZATION, (4) REFRACTION OF LIGHT, (5) SNELL'S LAW, (6) LENSES, FOCUS, AND FOCAL POINTS, (7) IMAGE FORMATION, AND (8) ABERRATIONS, THE EYE, AND MAGNIFICATION. THE INTRODUCTION AND UNITS ON…

  2. Calculus Students' Understanding of Volume

    Science.gov (United States)

    Dorko, Allison; Speer, Natasha M.

    2013-01-01

    Researchers have documented difficulties that elementary school students have in understanding volume. Despite its importance in higher mathematics, we know little about college students' understanding of volume. This study investigated calculus students' understanding of volume. Clinical interview transcripts and written responses to volume…

  3. A Finite Volume Scheme on the Cubed Sphere Grid

    Science.gov (United States)

    Putman, William M.; Lin, S. J.

    2008-01-01

    The performance of a multidimensional finite-volume scheme for global atmospheric dynamics is evaluated on the cubed-sphere geometry. We will explore the properties of the finite volume scheme through traditional advection and shallow water test cases. Baroclinic evaluations performed via a recently developed deterministic initial value baroclinic test case from Jablonowski and Williamson that assesses the evolution of an idealized baroclinic wave in the Northern Hemisphere for a global 3-dimensional atmospheric dynamical core. Comparisons will be made when available to the traditional latitude longitude discretization of the finite-volume dynamical core, as well as other traditional gridpoint and spectral formulations for atmospheric dynamical cores.

  4. Sweet lake geopressured-geothermal project, Magma Gulf-Technadril/DOE Amoco Fee. Annual report, December 1, 1979-February 27, 1981. Volume I. Drilling and completion test well and disposal well

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, R.W. (ed.)

    1982-06-01

    The Sweet lake site is located approximately 15 miles southeast of Lake Charles in Cameron Parish, Louisiana. A geological study showed that the major structure in this area is a graben. The dip of the beds is northwesterly into the basin. A well drilled into the deep basin would find the target sand below 18,000', at high pressures and temperatures. However, since there is no well control in the basin, the specific site was chosen on the 15,000' contour of the target sand in the eastern, more narrow part of the garben. Those key control wells are present within one mile of the test well. The information acquired by drilling the test well confirmed the earlier geologic study. The target sand was reached at 15,065', had a porosity of over 20% and a permeability to water of 300 md. The original reservoir pressure was 12,060 psi and the bottom hole temperature 299{sup 0}F. There are approximately 250 net feet of sand available for the perforation. The disposal well was drilled to a total depth of 7440'.

  5. Volume of an Industrial Autoclave

    Directory of Open Access Journals (Sweden)

    Nicholas Madaffari

    2010-01-01

    Full Text Available We were able to determine the volume of an industrial autoclave sterilization tank using a technique learned in calculus. By measuring the dimensions of the tank and roughly estimating the equation of curvature at the ends of the tank, we were able to revolve half of the end of the tank around the x axis to get its fluid volume. Adding the two volumes of the ends and the volume of the cylindrical portion on the tank yielded the total volume.

  6. Hearing Impairment Is Associated with Smaller Brain Volume in Aging

    Science.gov (United States)

    Rigters, Stephanie C.; Bos, Daniel; Metselaar, Mick; Roshchupkin, Gennady V.; Baatenburg de Jong, Robert J.; Ikram, M. Arfan; Vernooij, Meike W.; Goedegebure, André

    2017-01-01

    Although recent studies show that age-related hearing impairment is associated with cerebral changes, data from a population perspective are still lacking. Therefore, we studied the relation between hearing impairment and brain volume in a large elderly cohort. From the population-based Rotterdam Study, 2,908 participants (mean age 65 years, 56% female) underwent a pure-tone audiogram to quantify hearing impairment. By performing MR imaging of the brain we quantified global and regional brain tissue volumes (total brain volume, gray matter volume, white matter (WM) volume, and lobe-specific volumes). We used multiple linear regression models, adjusting for age, sex, head size, time between hearing test and MR imaging, and relevant cognitive and cardiovascular covariates. Furthermore, we performed voxel-based morphometry to explore sub-regional differences. We found that a higher pure-tone threshold was associated with a smaller total brain volume [difference in standardized brain volume per decibel increase in hearing threshold in the age-sex adjusted model: -0.003 (95% confidence interval -0.004; -0.001)]. Specifically, WM volume was associated. Both associations were more pronounced in the lower frequencies. All associations were consistently present in all brain lobes in the lower frequencies and in most lobes in the higher frequencies, and were independent of cognitive function and cardiovascular risk factors. In voxel-based analyses we found associations of hearing impairment with smaller white volumes and some smaller and larger gray volumes, yet these were statistically non-significant. Our findings demonstrate that hearing impairment in elderly is related to smaller total brain volume, independent of cognition and cardiovascular risk factors. This mainly seems to be driven by smaller WM volume, throughout the brain.

  7. Light Propagation Volumes

    OpenAIRE

    Mikulica, Tomáš

    2016-01-01

    Cílem diplomové práce je popsat různé metody výpočtu globálního osvětlení scény včetně techniky Light Propagation Volumes. Pro tuto metodu jsou podrobně popsány všechny tři kroky výpočtu: injekce, propagace a vykreslení. Dále je navrženo několik vlastních rozšíření zlepšující grafickou kvalitu metody. Části návrhu a implementace jsou zaměřeny na popis scény, zobrazovacího systému, tvorby stínů, implementace metody Light Propagation Volumes a navržených rozšíření. Práci uzavírá měření, porovná...

  8. 呼吸末阻断试验评估感染性休克机械通气患者血容量的临床价值研究%Clinical value of end-expiratory blocking test in assessment of blood volume of septic shock patients undergoing mechanical ventilation

    Institute of Scientific and Technical Information of China (English)

    谢晓红; 吴远怡; 符惠雅; 麦叶; 李瑞; 周忠义; 李娜

    2016-01-01

    目的:研究呼气末阻断试验(EEO )在感染性休克机械通气患者容量反应性中的预测效果,以提高容量反应性评估方法、指导患者血容量复苏。方法选取2013年9月-2015年9月医院重症医学科收治的160例感染性休克机械通气患者临床资料进行分析,采用随机对照方法将患者分为对照组和试验组,每组各80例,对照组为对容量负荷试验无反应性,试验组为对容量负荷试验有反应性,患者入院后对其进行EEO ,分析其在感染性休克机械通气患者容量反应性中的预测效果。结果两组患者不同基线下EEO和被动抬腿试验对心率、收缩压、平均血压、舒张压差异无统计学意义;试验组基线1脉压和心脏指数下EEO水平显著高于对照组( P<0.05);试验组基线2脉压和心脏指数水平下PLR显著高于对照组(P<0.05)。结论感染性休克机械通气患者采用EEO、心脏指数以及脉压等指标均能评估患者容量反应性,而EEO评估容量反应性更加可靠。%OBJECTIVE To study the effect of end-expiratory blocking test on prediction of volume responsiveness of the septic shock patients undergoing mechanical ventilation so as to improve the assessment of volume respon-siveness and provide guidance for recovery of blood volume .METHODS The clinical data were collected from 160 septic shock patients who underwent the mechanical ventilation in the critical care medicine department from Sep 2013 to Sep 2015 ,then the enrolled patients were randomly divided into the control group and the experimental group ,with 80 cases in each .The control group was not responsive to the capacity load test ,while the experimen-tal group was responsive to the capacity load test ,the end-expiratory blocking test was carried out for the patients after the admission to the hospital ,and the effect of the end-expiratory blocking test on prediction of volume re-sponsiveness of the

  9. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume One - Main Text and Appendices A and B

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    The laboratory investigation was performed to evaluate the feasibility of utilizing in situ chemical oxidation for remediating the secondary source of groundwater contaminants at the Idaho National Engineering and Environmental Laboratory (INEEL) Test Area North (TAN) Site. The study involved trichloroethene (TCE) contaminated media (groundwater, soil, and sludge) from TAN. The effectiveness of the selected oxidant, potassium permanganate (KMn0(sub4)), was evaluated at multiple oxidant and contaminant concentrations. Experiments were performed to determine the oxidant demand of each medium and the rate of TCE oxidation. The experiments were performed under highly controlled conditions (gas-tight reactors, constant 12C temperature). Multiple parameter were monitored over time including MN0(sub 4) and TCE concentrations and pH.

  10. The Gigaton Volume Detector in Lake Baikal

    Energy Technology Data Exchange (ETDEWEB)

    Avrorin, A. [Institute for Nuclear Research, 60th October Anniversary prospect 7a, Moscow 117132 (Russian Federation); Aynutdinov, V., E-mail: aynutdin@yandex.r [Institute for Nuclear Research, 60th October Anniversary prospect 7a, Moscow 117132 (Russian Federation); Belolaptikov, I. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Berezhnev, S. [Skobeltsyn Institute of Nuclear Physics MSU, Moscow (Russian Federation); Bogorodsky, D.; Budnev, N. [Irkutsk State University, Irkutsk (Russian Federation); Danilchenko, I.; Domogatsky, G.; Doroshenko, A. [Institute for Nuclear Research, 60th October Anniversary prospect 7a, Moscow 117132 (Russian Federation); Dyachok, A. [Irkutsk State University, Irkutsk (Russian Federation); Dzhilkibaev, Zh. [Institute for Nuclear Research, 60th October Anniversary prospect 7a, Moscow 117132 (Russian Federation); Ermakov, G. [Skobeltsyn Institute of Nuclear Physics MSU, Moscow (Russian Federation); Fialkovsky, S. [Nizhni Novgorod State Technical University, Nizhni Novgorod (Russian Federation); Gaponenko, O. [Institute for Nuclear Research, 60th October Anniversary prospect 7a, Moscow 117132 (Russian Federation); Golubkov, K. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Gres' , O.; Gres' , T. [Irkutsk State University, Irkutsk (Russian Federation); Grishin, N. [Skobeltsyn Institute of Nuclear Physics MSU, Moscow (Russian Federation); Grishin, O. [Irkutsk State University, Irkutsk (Russian Federation); Klabukov, A. [Institute for Nuclear Research, 60th October Anniversary prospect 7a, Moscow 117132 (Russian Federation)

    2011-05-21

    The objective of the Baikal Project is the creation of a kilometer-scale high-energy neutrino observatory: the Gigaton Volume Detector (GVD) in Lake Baikal. Basic elements of the GVD - new optical modules, FADC readout units, and underwater communication systems - were investigated and tested in Lake Baikal with prototype strings in 2008-2010. We describe the results of prototype strings operation and review the preliminary design and expected sensitivity of the GVD telescope.

  11. Development of energy-efficient comfort ventilation plants with air quality controlled volume flow rate and continuous detection of the status of the windows aperture. Part 3. Final report with documentation of the field test; Entwicklung energieeffizienter Komfortlueftungsanlagen mit luftqualitaetsgefuehrter Volumenstromregelung und kontinuierlicher Erfassung des Fensteroeffnungszustandes. Teilbericht 3. Endbericht mit Dokumentation des Feldtests

    Energy Technology Data Exchange (ETDEWEB)

    Grossklos, Marc; Hacke, Ulrike [Institut Wohnen und Umwelt GmbH, Darmstadt (Germany)

    2012-10-25

    Residential ventilation systems with a heat recovery contribute to the improvement of the air quality and to the reduction of heat losses caused by ventilation. An additional opening of the windows in residential buildings results in a clearly increasing consumption of thermal heat because the thermal heat of the out coming air cannot be utilized furthermore. Continuous information on the energetic effects of the opening of windows is helpful. Under this aspect, the authors of the contribution under consideration report on the development of energy efficient comfort ventilation systems with an air quality controlled volume flow rate and continuous detection of the status of the windows aperture. The contribution under consideration is the third part of a project concerning to this theme. This part encompasses a field test with four single-family houses in which the air quality control as well as the detection of the status of the windows aperture is tested and optimized for a long period. This contribution also contains the results of the second part of the project. The second project investigate the technical implementation of a air quality regulation at prototypes and test facilities.

  12. Occidental vertical modified in situ process for the recovery of oil from oil shale, Phase 2. Construction, operation, testing, and environmental impact. Final report, August 1981-December 1982. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, A.L.; Zahradnik, R.L.; Kaleel, R.J.

    1984-01-01

    Occidential Oil Shale, Inc. (OOSI) recently completed the demonstration of mining, rubblization, ignition, and simulataneous processing of two commericalized modified in situ (MIS) retorts at the Logas Wash facility near DeBeque, Colorado. Upon completion of Retort 6 in 1978, Occidential began incorporating all of the knowledge previously acquired in an effort to design two more commercial-sized MIS retorts. Any commercial venture of the future would require the ability to operate simultaneously more than one retort. Thus, Retorts 7 and 8 were developed during 1980 and 1981 through joint funding of the DOE and OOSI in Phase II. Rubblization of the retorts produced an average rubble void of 18.5% in the low grade shale (17 gallons per ton) at the Logan Wash site. After rubblization, bulkheads were constructed, inlet and offgas pipes were installed and connected to surface processing facilities and liquid product handling systems were connected to the retorts. Extensive instrumentation was installed in cooperation with Sandia National Laboratories for monitoring the complete operation of the retorts. After pre-ignition testing, Retort 8 was ignited in December of 1981 and Retort 7 was ignited in January of 1982. The retorts were operated without interruption from ignition until mid- November of 1982 at which time inlet gas injection was terminated and water quenching was begun. Total product yield from the two retorts was approximately 200,000 barrels of oil, or 70% of the Fischer Assay oil-in-place in the rubblized rock in the two retrots. Water quenching studies were conducted over a period of several months, with the objective of determining the rate of heat extraction from the retorts as well as determining the quantity and quality of offgas and water coming out from the quenching process. Data from these studies are also included in this Summary Report. 62 figs., 18 tabs.

  13. Blower test stand; Luftleistungspruefstand

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2003-04-01

    Blowers move air, but how much air? Extensive measurements are required for assessing blower performance in terms of the actual air flow volume. The most precise results are obtained in a test stand. [German] Luefter bewegen Luft. Aber wie viel wird tatsaechlich bewegt? Fuer die Bestimmung der tatsaechlichen Luftfoerderleistung ist ein grosser Messaufwand notwendig, die praezisesten Ergebnisse bringt ein Luftleistungsmessstand. (orig.)

  14. Cosmological Measures without Volume Weighting

    CERN Document Server

    Page, Don N

    2008-01-01

    Many cosmologists (myself included) have advocated volume weighting for the cosmological measure problem, weighting spatial hypersurfaces by their volume. However, this often leads to the Boltzmann brain problem, that almost all observations would be by momentary Boltzmann brains that arise very briefly as quantum fluctuations in the late universe when it has expanded to a huge size, so that our observations (too ordered for Boltzmann brains) would be highly atypical and unlikely. Here it is suggested that volume weighting may be a mistake. Volume averaging is advocated as an alternative. One consequence would be a loss of the argument for eternal inflation.

  15. Heliophysics 3 Volume Set

    Science.gov (United States)

    Schrijver, Carolus J.; Siscoe, George L.

    2010-11-01

    Volume 1: Preface; 1. Prologue Carolus J. Schrijver and George L. Siscoe; 2. Introduction to heliophysics Thomas J. Bogdan; 3. Creation and destruction of magnetic field Matthias Rempel; 4. Magnetic field topology Dana W. Longcope; 5. Magnetic reconnection Terry G. Forbes; 6. Structures of the magnetic field Mark B. Moldwin, George L. Siscoe and Carolus J. Schrijver; 7. Turbulence in space plasmas Charles W. Smith; 8. The solar atmosphere Viggo H. Hansteen; 9. Stellar winds and magnetic fields Viggo H. Hansteen; 10. Fundamentals of planetary magnetospheres Vytenis M. Vasyliūnas; 11. Solar-wind magnetosphere coupling: an MHD perspective Frank R. Toffoletto and George L. Siscoe; 12. On the ionosphere and chromosphere Tim Fuller-Rowell and Carolus J. Schrijver; 13. Comparative planetary environments Frances Bagenal; Bibliography; Index. Volume 2: Preface; 1. Perspective on heliophysics George L. Siscoe and Carolus J. Schrijver; 2. Introduction to space storms and radiation Sten Odenwald; 3. In-situ detection of energetic particles George Gloeckler; 4. Radiative signatures of energetic particles Tim Bastian; 5. Observations of solar and stellar eruptions, flares, and jets Hugh Hudson; 6. Models of coronal mass ejections and flares Terry Forbes; 7. Shocks in heliophysics Merav Opher; 8. Particle acceleration in shocks Dietmar Krauss-Varban; 9. Energetic particle transport Joe Giacalone; 10. Energy conversion in planetary magnetospheres Vytenis Vasyliūnas; 11. Energization of trapped particles Janet Green; 12. Flares, CMEs, and atmospheric responses Tim Fuller-Rowell and Stanley C. Solomon; 13. Energetic particles and manned spaceflight 358 Stephen Guetersloh and Neal Zapp; 14. Energetic particles and technology Alan Tribble; Appendix I. Authors and editors; List of illustrations; List of tables; Bibliography; Index. Volume 3: Preface; 1. Interconnectedness in heliophysics Carolus J. Schrijver and George L. Siscoe; 2. Long-term evolution of magnetic activity of Sun

  16. Engineered materials characterization report, volume 3 - corrosion data and modeling update for viability assessments

    Energy Technology Data Exchange (ETDEWEB)

    McCright, R D

    1998-06-30

    This Engineered Materials Characterization Report (EMCR), Volume 3, discusses in considerable detail the work of the past 18 months on testing the candidate materials proposed for the waste-package (WP) container and on modeling the performance of those materials in the Yucca Mountain (YM) repository setting This report was prepared as an update of information and serves as one of the supporting documents to the Viability Assessment (VA) of the Yucca Mountain Project. Previous versions of the EMCR have provided a history and background of container-materials selection and evaluation (Volume I), a compilation of physical and mechanical properties for the WP design effort (Volume 2), and corrosion-test data and performance-modeling activities (Volume 3). Because the information in Volumes 1 and 2 is still largely current, those volumes are not being revised. As new information becomes available in the testing and modeling efforts, Volume 3 is periodically updated to include that information.

  17. Volume and Surface-Enhanced Volume Negative Ion Sources

    CERN Document Server

    Stockli, M P

    2013-01-01

    H- volume sources and, especially, caesiated H- volume sources are important ion sources for generating high-intensity proton beams, which then in turn generate large quantities of other particles. This chapter discusses the physics and technology of the volume production and the caesium-enhanced (surface) production of H- ions. Starting with Bacal's discovery of the H- volume production, the chapter briefly recounts the development of some H- sources, which capitalized on this process to significantly increase the production of H- beams. Another significant increase was achieved in the 1990s by adding caesiated surfaces to supplement the volume-produced ions with surface-produced ions, as illustrated with other H- sources. Finally, the focus turns to some of the experience gained when such a source was successfully ramped up in H- output and in duty factor to support the generation of 1 MW proton beams for the Spallation Neutron Source.

  18. Does Glass Size and Shape Influence Judgements of the Volume of Wine?

    Science.gov (United States)

    Pechey, Rachel; Attwood, Angela S; Couturier, Dominique-Laurent; Munafò, Marcus R; Scott-Samuel, Nicholas E; Woods, Andy; Marteau, Theresa M

    2015-01-01

    Judgements of volume may influence the rate of consumption of alcohol and, in turn, the amount consumed. The aim of the current study was to examine the impact of the size and shape of wine glasses on perceptions of wine volume. Online experiment: Participants (n = 360; recruited via Mechanical Turk) were asked to match the volume of wine in two wine glasses, specifically: 1. the Reference glass holding a fixed reference volume, and 2. the Comparison glass, for which the volume could be altered until participants perceived it matched the reference volume. One of three comparison glasses was shown in each trial: 'wider' (20% wider but same capacity); 'larger' (same width but 25% greater capacity); or 'wider-and-larger' (20% wider and 25% greater capacity). Reference volumes were 125 ml, 175 ml and 250 ml, in a fully factorial within-subjects design: 3 (comparison glass) x 3 (reference volume). Non-zero differences between the volumes with which participants filled comparison glasses and the corresponding reference volumes were identified using sign-rank tests. Participants under-filled the wider glass relative to the reference glass for larger reference volumes, and over-filled the larger glass relative to the reference glass for all reference volumes. Results for the wider-and-larger glass showed a mixed pattern across reference volume. For all comparison glasses, in trials with larger reference volumes participants tended to fill the comparison glass less, relative to trials with smaller reference volumes for the same comparison glass. These results are broadly consistent with people using the relative fullness of glasses to judge volume, and suggest both the shape and capacity of wine glasses may influence perceived volume. Perceptions that smaller glasses contain more than larger ones (despite containing the same volume), could slow drinking speed and overall consumption by serving standard portions in smaller glasses. This hypothesis awaits testing.

  19. Volume regulatory hormones and plasma volume in pregnant women with sickle cell disorder

    Directory of Open Access Journals (Sweden)

    Bosede B Afolabi

    2016-09-01

    Full Text Available Background: Sickle cell disease (haemoglobin SS (HbSS mainly affects those of West African origin and is associated with hypervolaemia. Plasma volume rises by up to 50% in normal pregnancy but was previously found to be paradoxically contracted in late sickle cell pregnancy. The renin–angiotensin–aldosterone system is activated very early in human pregnancy to support the plasma volume expansion. We hypothesised that activation of the renin–angiotensin–aldosterone system would be blunted in pregnant women with sickle cell disease. Materials and methods: We measured plasma volume and concentrations of plasma renin, angiotensinogen, aldosterone and other volume-related hormones in a cross-sectional study of pregnant and non-pregnant Nigerian women with HbSS or HbAA. Results: Plasma volume was higher in non-pregnant HbSS than HbAA women, but had not risen by 16 weeks, unlike plasma volume in HbAA women. The concentration of plasma renin also rose significantly less by 16 weeks in HbSS; angiotensinogen and aldosterone concentrations increased. Conclusions: The lower plasma renin concentration at 16 weeks with HbSS could be either primary or secondary to vasoconstriction related to inadequate vasodilator activity. The contracted plasma volume might then stimulate aldosterone synthesis by non-angiotensin II dependent stimulation. Studies of vasodilators such as nitric oxide, vasodilator eicosanoids or the PlGF/VEGF/sFlT-1 axis in pregnant HbSS and HbAA women will test this hypothesis.

  20. Mass and volume of a body of young footballers

    Directory of Open Access Journals (Sweden)

    Smajić Miroslav

    2012-01-01

    Full Text Available Knowledge of the structure of some anthropological abilities and characteristics of sportsmen as well as their development represent the basic condition for successful management of the process of sports training. The aim of this research is to determine mass and volume of a body of young footballers. The sample of examinees consists of 120 footballers of different age categories from 'Vojvodina' football club, namely: junior pioneers (aged 11-12 - 30 examinees, senior pioneers (aged 13-14 - 30 examinees, cadets (aged 15-16 - 30 examinees and youth (aged 17-18 - 30 examinees. For transversal skeleton dimension, young footballers were measured for shoulder width and pelvic width. For the assessment of mass and volume of a body are measured body mass, the volume of upper leg, the volume of lower leg, the volume of chest, the volume of stomach, skin fold of tomach and skin fold of upper arm. The testing of significant differences between footballers of different age categories as well as deviation from expected values were calculated by 't-test' and univariate variance analysis (ANOVA. On the basis of the results obtained, it can be concluded that average results show a general tendency of increase of results of weight and volume of the body from younger to older age categories. Variable measures show that youth examinees are the most homogenous while senior pioneers are the most heterogenous.

  1. PDLE: Sustaining Professionalism. Volume 3

    Science.gov (United States)

    Byrd, Patricia, Ed.; Nelson, Gayle, Ed.

    2003-01-01

    This third volume looks at ways that seasoned professionals continue to develop throughout their careers. The text includes descriptive accounts of professionals seeking to enhance their careers while remaining inspired to continue to develop professionally. This volume reveals how personal and professional lives are entwined. It proves that TESOL…

  2. NJP VOLUME 41 NO 2

    African Journals Online (AJOL)

    PROF. EZECHUKWU

    2013-11-24

    Nov 24, 2013 ... sleep. There was also increase in both frequency of uri- nation and volume of urine voided; from1- 2 times to ... phagia, fever, head trauma, chronic cough, weight loss, ... water deprivation at 15Kg. Total volume of urine voided.

  3. Finding related functional neuroimaging volumes

    DEFF Research Database (Denmark)

    Nielsen, Finn Årup; Hansen, Lars Kai

    2004-01-01

    We describe a content-based image retrieval technique for finding related functional neuroimaging experiments by voxelization of sets of stereotactic coordinates in Talairach space, comparing the volumes and reporting related volumes in a sorted list. Voxelization is accomplished by convolving each...

  4. Assessing the optimal liquid volume to be sprayed on isolated olive trees according to their canopy volumes.

    Science.gov (United States)

    Miranda-Fuentes, A; Llorens, J; Rodríguez-Lizana, A; Cuenca, A; Gil, E; Blanco-Roldán, G L; Gil-Ribes, J A

    2016-10-15

    The application of pesticides to traditional and intensive olive orchards in Southern Spain has led to environmental problems. More specifically, the lack of an accurate, useful criterion to regulate the spray volume in relation to canopy characteristics has led to spray drift and runoff, which are threats to local ecosystems. The aim of this study was to determine the optimal relationship between canopy volume and the spray application volume, called specific spray volume, CV, through laboratory and field trials. In the laboratory trial, 6 specific spray volumes (0.05, 0.08, 0.10, 0.12, 0.15, and 0.20Lm(-3)) were tested in a specially designed structure containing small, live olive trees in order to simulate an intensive plantation system. The model aimed to evaluate the coverage of pesticide application on water sensitive paper (WSP) collectors. In the field trial, the three laboratory specific spray volumes that gave the best coverage values were tested on live, intensively managed trees, whose crown volume was manually measured. Food dye E-102 was used to determine the spray deposition on artificial targets (10×10cm absorbent paper pieces), and WSP was used to evaluate spray coverage. The spray penetration and deposit homogeneity inside the canopy were also evaluated. Weather conditions during the field trial were monitored with a weather station. The results of the laboratory trial showed that the three best specific spray volumes were 0.08, 0.10, and 0.12Lm(-3), resulting in mean coverage values of approximately 30%. The ANOVA of the field trial results showed that the 0.12Lm(-3) was the optimal specific spray volume for isolated olive trees. This specific spray volume gave the highest mean deposits, the best efficiency (as measured by the greatest normalized deposit), the most favourable penetration and homogeneity, and the highest coverage values.

  5. Radcalc for Windows. Volume 2: Technical manual

    Energy Technology Data Exchange (ETDEWEB)

    Green, J.R.

    1995-09-27

    Radcalc for Windows is a user-friendly menu-driven Windows-compatible software program with applications in the transportation of radioactive materials. It calculates the radiolytic generation of hydrogen gas in the matrix of low-level and high-level radioactive waste using NRC-accepted methodology. It computes the quantity of a radionuclide and its associated products for a given period of time. In addition, the code categorizes shipment quantities as radioactive, Type A or Type B, limited quantity, low specific activity, highway route controlled, and fissile excepted using DOT definitions and methodologies, as outlined in 49 CFR Subchapter C. The code has undergone extensive testing and validation. Volume I is a User`s Guide, and Volume II is the Technical Manual for Radcalc for Windows

  6. Discretized Volumes in Numerical Methods

    CERN Document Server

    Antal, Miklós

    2007-01-01

    We present two techniques novel in numerical methods. The first technique compiles the domain of the numerical methods as a discretized volume. Congruent elements are glued together to compile the domain over which the solution of a boundary value problem is sought. We associate a group and a graph to that volume. When the group is symmetry of the boundary value problem under investigation, one can specify the structure of the solution, and find out if there are equispectral volumes of a given type. The second technique uses a complex mapping to transplant the solution from volume to volume and a correction function. Equation for the correction function is given. A simple example demonstrates the feasibility of the suggested method.

  7. Animation framework using volume visualization

    Science.gov (United States)

    Fang, Wenxuan; Wang, Hongli

    2004-03-01

    As the development of computer graphics, scientific visualization and advanced imaging scanner and sensor technology, high quality animation making of volume data set has been a challenging in industries. A simple animation framework by using current volume visualization techniques is proposed in this paper. The framework consists of two pipelines: one is surface based method by using marching cubes algorithm, the other is volume rendering method by using shear-warp method. The volume visualization results can not only be used as key frame sources in the animation making, but also can be directly used as animation when the volume visualization is in stereoscopic mode. The proposed framework can be applied into fields such as medical education, film-making and archaeology.

  8. Sparse PDF Volumes for Consistent Multi-Resolution Volume Rendering

    KAUST Repository

    Sicat, Ronell Barrera

    2014-12-31

    This paper presents a new multi-resolution volume representation called sparse pdf volumes, which enables consistent multi-resolution volume rendering based on probability density functions (pdfs) of voxel neighborhoods. These pdfs are defined in the 4D domain jointly comprising the 3D volume and its 1D intensity range. Crucially, the computation of sparse pdf volumes exploits data coherence in 4D, resulting in a sparse representation with surprisingly low storage requirements. At run time, we dynamically apply transfer functions to the pdfs using simple and fast convolutions. Whereas standard low-pass filtering and down-sampling incur visible differences between resolution levels, the use of pdfs facilitates consistent results independent of the resolution level used. We describe the efficient out-of-core computation of large-scale sparse pdf volumes, using a novel iterative simplification procedure of a mixture of 4D Gaussians. Finally, our data structure is optimized to facilitate interactive multi-resolution volume rendering on GPUs.

  9. Sparse PDF Volumes for Consistent Multi-Resolution Volume Rendering.

    Science.gov (United States)

    Sicat, Ronell; Krüger, Jens; Möller, Torsten; Hadwiger, Markus

    2014-12-01

    This paper presents a new multi-resolution volume representation called sparse pdf volumes, which enables consistent multi-resolution volume rendering based on probability density functions (pdfs) of voxel neighborhoods. These pdfs are defined in the 4D domain jointly comprising the 3D volume and its 1D intensity range. Crucially, the computation of sparse pdf volumes exploits data coherence in 4D, resulting in a sparse representation with surprisingly low storage requirements. At run time, we dynamically apply transfer functions to the pdfs using simple and fast convolutions. Whereas standard low-pass filtering and down-sampling incur visible differences between resolution levels, the use of pdfs facilitates consistent results independent of the resolution level used. We describe the efficient out-of-core computation of large-scale sparse pdf volumes, using a novel iterative simplification procedure of a mixture of 4D Gaussians. Finally, our data structure is optimized to facilitate interactive multi-resolution volume rendering on GPUs.

  10. 30 CFR 33.31 - Test space.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Test space. 33.31 Section 33.31 Mineral... § 33.31 Test space. (a) Drilling tests shall be conducted in a test space formed by two curtains suspended across a mine opening in such a manner that the volume of the test space shall be approximately...

  11. Archeological Testing Fort Hood: 1994-1995. Volume 2

    Science.gov (United States)

    1996-10-01

    ucted for light and warmth , and projectile points came from hearths with sparse possibly to prepare one or two meals at a short- debitage. Abundant...all, a mechanism for older shells reworked from other contexts. making determinations about the trustworthiness of artifact associations. As the case

  12. Static Tests of Segments of Tunnel Linings. Volume II. Data.

    Science.gov (United States)

    1979-06-30

    Naval Postgraduate School ATTN: Code 0142 Deputy Chief of Staff for Ops, & Plans Department of the Army Naval Research Laboratory ATTN: MOCA -ADL ATTN...Continued) Electromechanical Sys. of New Mexico , Inc. Rand Corporation ATTN: R. Shunk ATTN: A. Laupa Eric H. Wang R & D Associates Civil Engineering Rsch. Fac

  13. Underground Test Sensor Development. Volume 2. Electric Field Sensor Development

    Science.gov (United States)

    1990-05-01

    Pratt, Poliakoff , Dehmer, and Dehmer [1983], as well as one-photon resonant, two-photon ionization [Zacharias, Rottke, and Welge, 1980]. Excessive...Molecular Spectra, John Wiley and Sons, Inc., New York City, 1963. Pratt, S. T., E. D. Poliakoff , P. M. Dehmer, and J. L. Dehmer, "Photoelectron Studies of

  14. Experimental Testing of Corpuscular Radiation Detectors. Volume 1. Revision 1

    Science.gov (United States)

    1989-09-07

    Lipkin, Phys. Rev. Lett. 58 1176 (1987); Y. Aharonov , F. T. Avignone, A. Casher and S. Nussinov, Phys. Rev. Lett. 58 1173 (1987); G. T. Trammell and...unpublished Caltech preprint, July 1986; H. J. Lipkin, Phys. Rev. Lett. 58 1176 (1987); Y. Aharonov , F. T. Avignone, A.3 Casher and S. Nussinov, Phys...temperature. We noticed changes of about 5% from Summer to Winter 1988-1989. Fortunately, these changes in I period were slow enough that the effect could

  15. USAF Test Pilot School. Performance Phase Textbook. Volume 1

    Science.gov (United States)

    1986-04-01

    properties along a streamline by using a device known as a venturi tube which is illustrated in Figure 2.1. P) "V-- V- p FIGURE 2. 1. FIOW OF AIR TTIOUGH A...VEMIURI From the law of conservation of mass, what enters the tubo at Station 1 must exit at Station 3. The mass flow rate can be rmpresented by the... venturi tube. Although there are other forms of energy, we need to ccisider only the potential energy due to the static pressure at a point along the

  16. An Improved Ground Vibration Test Method. Volume 1. Research Report

    Science.gov (United States)

    1980-09-01

    unit force levels. The development of the frequency response function is direct and straight-forward, following very routine procedures. ISO . . ..T The...computed as follows: 3 X No. of Modes X No. of Points NuMber of Blocks - 1024 4 A-68 Therefore, if storage for 10 modes and iSO points was desired, the...YAVG) OS46 YMIN=ABS(YMIN-YAVG) 0547 XMAX=AMAXi(XMAX,XMIN,YMAX,YMI4) 0548 C 0549 Z1.= 26000 ./XMAX 0550 C ossi C CALCULATE DIVISOR~S USED FOR DISPLAY

  17. A Report Guide to Radiographic Testing Literature. Volume 6

    Science.gov (United States)

    1975-04-01

    This method is not suitaole for measuring more than 30-mils of Zircaloy or 50-mils of aluminum. .-^.:...:^.-.^»,.-*^X***~~: ■-■• ,,^^-i:., g.,| ^ft...range from 5/16 to 3/4 in. O.D. The fuel rods have been stainless steel on Zircaloy tubes filled with compacted UO2. (’J,Th)02 or PUO2 particles...given 2 ppm of O2 can be detected by observing the rate of decrease of kryp- tonated C source at 1000°C. With kryptonated copper, ozone at temperatures

  18. Automotive Test Rig Final Design Report. Volume 2. Control System.

    Science.gov (United States)

    1986-01-01

    enclosures to Junction Box 1, and Terra computer, and Miltope recorder Interconnections o Junction Box 1 Schematic, Bwg . ho. A10048 o Junctions Box 1 to...7063A01000 110V EScTC~q -~~%E ---- e5t 0 X1D71 -~~~~~~ -i #t .~E~ . ;;~ IB , .a A, .(~~A tD "t9- __ - ~ ~ ~ ~ e exI3 21t~.&ccQ~ _ _ _ __________ ~~~~e ta...TFNGý 002619O! 66C ’eAIL8, eaee 21 -~ERRGflC- aL~ TD 8 W.ARWNINOC I39LID. eClrlPft-AT18N t3F BATATR .zflr~tETE.. &~- 9EFIT-A RfN 19SUEBE. ENO 5F

  19. Enhance and Test the Remote Seismic Terminal. Volume I

    Science.gov (United States)

    1983-01-01

    between the two cursors. -. .. .--- " . -. . . •Mo ;Po B17 Period Measures and displays 113744 S the number of samples from the first to the Illy...cknowl edqent Thr or,-.h~ut t 1,h- 1 -, o j ect the wr i t er had the benef it of a c,r.t .nuo _ e:xchar. ce of e wIt h A C . Cann. Work was performed

  20. Archeological Testing Fort Hood: 1994-1995, Volume 1

    Science.gov (United States)

    1996-10-01

    adjacent to the city of Killeen (Figure 2.1) and Basin subsided in the Miocene, severe, extensive encompasses an area of approximately 878 km2 stresses ...Mesquite ( Prosopis glandulosa), typical of areas to the west of the * fort, also occurs in relatively low numbers. • Riparian habitats support a...not further mapped or were partially mapped. plastic bag with an acid-free, archivally stable tag On each site, a 5/8-inch iron rod was established as

  1. Aerodynamic results of a separation test (CA20) conducted at the Boeing transonic wind tunnel using 0.030-scale models of the configuration 140A/B (modified) SSV orbiter (model no. 45-0) and the Boeing 747 carrier (model no. AX 1319 I-1), volume 1. [wind tunnel tests

    Science.gov (United States)

    Dziubala, T.; Esparza, V.; Gillins, R. L.; Petrozzi, M.

    1975-01-01

    A Rockwell built 0.030-scale 45-0 modified Space Shuttle Orbiter Configuration 14?A/B model and a Boeing built 0.030-scale 747 carrier model were tested to provide six component force and moment data for each vehicle in proximity to the other at a matrix of relative positions, attitudes and test conditions (angles of attack and sideslip were varied). Orbiter model support system tare effects were determined for corrections to obtain support-free aerodynamics. In addition to the balance force data, pressures were measured. Pressure orifices were located at the base of the Orbiter, on either side of the vertical blade strut, and at the mid-root chord on either side of the vertical tail. Strain gages were installed on the Boeing 747 vertical tail to indicate buffet onset. Photographs of aerodynamic configurations tested are shown.

  2. Minivoids in the Local Volume

    CERN Document Server

    Tikhonov, A V

    2006-01-01

    We consider a sphere of 7.5 Mpc radius, which contains 355 galaxies with accurately measured distances, to detect the nearest empty volumes. Using a simple void detection algorithm, we found six large (mini)voids in Aquila, Eridanus, Leo, Vela, Cepheus and Octans, each of more than 30 Mpc^3. Besides them, 24 middle-size "bubbles" of more than 5 Mpc^3 volume are detected, as well as 52 small "pores". The six largest minivoids occupy 58% of the considered volume. Addition of the bubbles and pores to them increases the total empty volume up to 75% and 81%, respectively. The detected local voids look like oblong potatoes with typical axial ratios b/a = 0.75 and c/a = 0.62 (in the triaxial ellipsoide approximation). Being arranged by the size of their volume, local voids follow power law of volumes-rankes dependence. A correlation Gamma-function of the Local Volume galaxies follows a power low with a formally calculated fractal dimension D = 1.5. We found that galaxies surrounding the local minivoids do not differ...

  3. Plasma volume changes during hypoglycaemia

    DEFF Research Database (Denmark)

    Hilsted, J; Frandsen, Henrik Lund; Christensen, N J

    1991-01-01

    -induced hypoglycaemia with total autonomic blockade (alpha-adrenoceptor blockade combined with beta-adrenoceptor blockade and atropine); and insulin-induced hypoglycaemia without any autonomic blockade. In the experiments without autonomic blockade the peripheral venous hematocrit increased, plasma volume decreased......, intravascular albumin content decreased and the transcapillary escape rate of albumin increased. In both experiments with autonomic blockade the increase in venous haematocrit was abolished, yet plasma volume decreased, intravascular albumin content decreased and the transcapillary escape rate of albumin...... increased in these experiments. Thus, the changes in plasma volume and composition in response to hypoglycaemia are due to the combined actions of adrenaline and of insulin....

  4. Plasma volume changes during hypoglycaemia

    DEFF Research Database (Denmark)

    Hilsted, J; Bendtsen, F; Christensen, N J

    1990-01-01

    To investigate whether previously reported changes in venous blood volume and composition induced by acute hypoglycaemia in humans are representative for the entire body we measured erythrocyte 51Cr content, haematocrit, plasma volume, intravascular albumin content and transcapillary escape rate...... of albumin in arterial and venous blood in seven healthy subjects before and during insulin-induced hypoglycaemia. In both vascular sites blood 51Cr content and the haematocrit increased, plasma volume and intravascular albumin content decreased and the transcapillary escape rate of albumin increased during...

  5. 10 CFR 63.332 - Representative volume.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Representative volume. 63.332 Section 63.332 Energy... Protection Standards § 63.332 Representative volume. (a) The representative volume is the volume of ground... radionuclides released from the Yucca Mountain disposal system that will be in the representative volume....

  6. Bare-Hand Volume Cracker for Raw Volume Data Analysis

    Directory of Open Access Journals (Sweden)

    Bireswar Laha

    2016-09-01

    Full Text Available Analysis of raw volume data generated from different scanning technologies faces a variety of challenges, related to search, pattern recognition, spatial understanding, quantitative estimation, and shape description. In a previous study, we found that the Volume Cracker (VC 3D interaction (3DI technique mitigated some of these problems, but this result was from a tethered glove-based system with users analyzing simulated data. Here, we redesigned the VC by using untethered bare-hand interaction with real volume datasets, with a broader aim of adoption of this technique in research labs. We developed symmetric and asymmetric interfaces for the Bare-Hand Volume Cracker (BHVC through design iterations with a biomechanics scientist. We evaluated our asymmetric BHVC technique against standard 2D and widely used 3D interaction techniques with experts analyzing scanned beetle datasets. We found that our BHVC design significantly outperformed the other two techniques. This study contributes a practical 3DI design for scientists, documents lessons learned while redesigning for bare-hand trackers, and provides evidence suggesting that 3D interaction could improve volume data analysis for a variety of visual analysis tasks. Our contribution is in the realm of 3D user interfaces tightly integrated with visualization, for improving the effectiveness of visual analysis of volume datasets. Based on our experience, we also provide some insights into hardware-agnostic principles for design of effective interaction techniques.

  7. Impact of surgical volume on nationwide hospital mortality after pancreaticoduodenectomy

    Institute of Scientific and Technical Information of China (English)

    Chul-Gyu Kim; Sungho Jo; Jae Sun Kim

    2012-01-01

    AIM:To evaluate the impact of surgical volume on nationwide hospital mortality after pancreaticoduodenectomy (PD) for periampullary tumors in South Korea.METHODS:Periampullary cancer patients who underwent PD between 2005 and 2008 were analyzed from the database of the Health Insurance Review and Assessment Service of South Korea.A total of 126 hospitals were divided into 5 categories,each similar in terms of surgical volume for each category.We used hospital mortality as a quality indicator,which was defined as death during the hospital stay for PD,and calculated adjusted mortality through multivariate logistic models using several confounder variables.RESULTS:A total of eligible 4975 patients were enrolled in this study.Average annual surgical volume of hospitals was markedly varied,ranging from 215 PDs in the very-high-volume hospital to < 10 PDs in the verylow-volume hospitals.Admission route,type of medical security,and type of operation were significantly different by surgical volume.The overall hospital mortality was 2.1% and the observed hospital mortality by surgical volume showed statistical difference.Surgical volume,age,and type of operation were independent risk factors for hospital death,and adjusted hospital mortality showed a similar difference between hospitals with observed mortality.The result of the HosmerLemeshow test was 5.76 (P =0.674),indicating an acceptable appropriateness of our regression model.CONCLUSION:The higher-volume hospitals showed lower hospital mortality than the lower-volume hospitals after PD in South Korea,which were clarified through the nationwide database.

  8. On-line Measuring Method for Shell Chamber Volume

    Institute of Scientific and Technical Information of China (English)

    ZHANG Li-zhong; WANG De-min; JIANG Tao; CAO Guo-hua; WANG Qi

    2005-01-01

    Using the ideal gas state equation, an on-line measuring method for the shell chamber volume is studied in this paper. After analyzing how various measurement parameters affect the measurement accuracy, the system parameters are optimized in this method. Because the shape and volume of the tested items are similar, the method of using "tamping" to raise the accuracy and speed of the measurement is put forward. Based on the work above, a prototype of the testing instrument for shell chamber volume was developed, automatically testing and controlling. Compared with the method of "water weight", this method is more accurate, quicker and more automotive, so it is adaptable for the use of on-line detection.

  9. Continuous concentration and constant volume washing of tetraphenylborate slurries

    Energy Technology Data Exchange (ETDEWEB)

    Siler, J.L.

    1999-12-08

    SRTC has completed filtration testing of tetraphenylborate (TPB) slurries with and without sludge. These tests were slightly different from previous SRS tests in that they used continuous mode concentration and constant volume washing evolutions. The extent of TPB recovery during washing was measured. The resulting washed precipitate slurry, with sludge, was stored at ambient temperature and under a nitrogen-inerted atmosphere to study TPB stability. Samples of both unwashed and washed slurries were submitted for rheology measurements.

  10. Indentation load relaxation test

    Energy Technology Data Exchange (ETDEWEB)

    Hannula, S.P.; Stone, D.; Li, C.Y. (Cornell Univ., Ithaca, NY (USA))

    Most of the models that are used to describe the nonelastic behavior of materials utilize stress-strain rate relations which can be obtained by a load relaxation test. The conventional load relaxation test, however, cannot be performed if the volume of the material to be tested is very small. For such applications the indentation type of test offers an attractive means of obtaining data necessary for materials characterization. In this work the feasibility of the indentation load relaxation test is studied. Experimental techniques are described together with results on Al, Cu and 316 SS. These results are compared to those of conventional uniaxial load relaxation tests, and the conversion of the load-indentation rate data into the stress-strain rate data is discussed.

  11. ICFA instrumentation bulletin, Volume 15, Fall 1997

    Energy Technology Data Exchange (ETDEWEB)

    Va' vra, J. [ed.

    1997-12-01

    The Bulletin reports on research and progress in the field of instrumentation with emphasis in the field of high-energy physics. This volume contains the following four papers: (1) Streamers in MSGC's and Other Gaseous Detectors; (2) Soft X-Ray Production in Spark Discharges in Hydrogen, Nitrogen, Air, Argon, and Xenon Gases; (3) Beam Tests of the CLEO III LiF-TEA Ring Imaging Cherenkov Detector; and (4) Electron Multiplication and Secondary Scintillation in Liquid Xenon: New Prospects.

  12. VOLUMNECT: measuring volumes with Kinect

    Science.gov (United States)

    Quintino Ferreira, Beatriz; Griné, Miguel; Gameiro, Duarte; Costeira, João. Paulo; Sousa Santos, Beatriz

    2014-03-01

    This article presents a solution to volume measurement object packing using 3D cameras (such as the Microsoft KinectTM). We target application scenarios, such as warehouses or distribution and logistics companies, where it is important to promptly compute package volumes, yet high accuracy is not pivotal. Our application auto- matically detects cuboid objects using the depth camera data and computes their volume and sorting it allowing space optimization. The proposed methodology applies to a point cloud simple computer vision and image processing methods, as connected components, morphological operations and Harris corner detector, producing encouraging results, namely an accuracy in volume measurement of 8mm. Aspects that can be further improved are identified; nevertheless, the current solution is already promising turning out to be cost effective for the envisaged scenarios.

  13. Anadromous fish inventory: Summary volume

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Summary volume, with discussion, on anadromous fish inventories, species lists, histories of fisheries, habitat, key spawning and rearing areas, runs/escapements,...

  14. Organ volume estimation using SPECT

    CERN Document Server

    Zaidi, H

    1996-01-01

    Knowledge of in vivo thyroid volume has both diagnostic and therapeutic importance and could lead to a more precise quantification of absolute activity contained in the thyroid gland. In order to improve single-photon emission computed tomography (SPECT) quantitation, attenuation correction was performed according to Chang's algorithm. The dual-window method was used for scatter subtraction. We used a Monte Carlo simulation of the SPECT system to accurately determine the scatter multiplier factor k. Volume estimation using SPECT was performed by summing up the volume elements (voxels) lying within the contour of the object, determined by a fixed threshold and the gray level histogram (GLH) method. Thyroid phantom and patient studies were performed and the influence of 1) fixed thresholding, 2) automatic thresholding, 3) attenuation, 4) scatter, and 5) reconstruction filter were investigated. This study shows that accurate volume estimation of the thyroid gland is feasible when accurate corrections are perform...

  15. Volume inside old black holes

    Science.gov (United States)

    Christodoulou, Marios; De Lorenzo, Tommaso

    2016-11-01

    Black holes that have nearly evaporated are often thought of as small objects, due to their tiny exterior area. However, the horizon bounds large spacelike hypersurfaces. A compelling geometric perspective on the evolution of the interior geometry was recently shown to be provided by a generally covariant definition of the volume inside a black hole using maximal surfaces. In this article, we expand on previous results and show that finding the maximal surfaces in an arbitrary spherically symmetric spacetime is equivalent to a 1 +1 geodesic problem. We then study the effect of Hawking radiation on the volume by computing the volume of maximal surfaces inside the apparent horizon of an evaporating black hole as a function of time at infinity: while the area is shrinking, the volume of these surfaces grows monotonically with advanced time, up to when the horizon has reached Planckian dimensions. The physical relevance of these results for the information paradox and the remnant scenarios are discussed.

  16. Volumetric measurement of tank volume

    Science.gov (United States)

    Walter, Richard T. (Inventor); Vanbuskirk, Paul D. (Inventor); Weber, William F. (Inventor); Froebel, Richard C. (Inventor)

    1991-01-01

    A method is disclosed for determining the volume of compressible gas in a system including incompressible substances in a zero-gravity environment consisting of measuring the change in pressure (delta P) for a known volume change rate (delta V/delta t) in the polytrophic region between isothermal and adiabatic conditions. The measurements are utilized in an idealized formula for determining the change in isothermal pressure (delta P sub iso) for the gas. From the isothermal pressure change (delta iso) the gas volume is obtained. The method is also applicable to determination of gas volume by utilizing work (W) in the compression process. In a passive system, the relationship of specific densities can be obtained.

  17. Ultrasonographic Measures of Volume Responsiveness

    Science.gov (United States)

    2017-02-01

    AFRL-SA-WP-SR-2017-0005 Ultrasonographic Measures of Volume Responsiveness Sarah B. Murthi, MD February 2017...use, or sell any patented invention that may relate to them. Qualified requestors may obtain copies of this report from the Defense Technical...TITLE AND SUBTITLE Ultrasonographic Measures of Volume Responsiveness 5a. CONTRACT NUMBER FA8650-13-2-6D10 5b. GRANT NUMBER 5c. PROGRAM

  18. Volumes of Polytopes Without Triangulations

    CERN Document Server

    Enciso, Michael

    2014-01-01

    We introduce a new formalism for defining and computing the volumes of completely general polytopes in any dimension. The expressions that we obtain for these volumes are independent of any triangulation, and manifestly depend only on the vertices of the underlying polytope. As one application of this formalism, we obtain new expressions for tree-level, n-point NMHV amplitudes in N=4 Super Yang-Mills (SYM) theory.

  19. Disorders of Erythrocyte Volume Homeostasis

    OpenAIRE

    Glogowska, Edyta; Gallagher, Patrick G.

    2015-01-01

    Inherited disorders of erythrocyte volume homeostasis are a heterogeneous group of rare disorders with phenotypes ranging from dehydrated to overhydrated erythrocytes. Clinical, laboratory, physiologic, and genetic heterogeneity characterize this group of disorders. A series of recent reports have provided novel insights into our understanding of the genetic bases underlying some of these disorders of red cell volume regulation. This report reviews this progress in understanding determinants ...

  20. Polarization effects. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Courant, E.

    1981-01-01

    The use of polarized proton beams in ISABELLE is important for several general reasons: (1) With a single longitudinally polarized proton beam, effects involving parity violation can be identified and hence processes involving weak interactions can be separated from those involving strong and electromagnetic interactions. (2) Spin effects are important in the strong interactions and can be useful for testing QCD. The technique for obtaining polarized proton beams in ISABELLE appears promising, particularly in view of the present development of a polarized proton beam for the AGS. Projections for the luminosity in ISABELLE for collisions of polarized protons - one or both beams polarized with longitudinal or transverse polarization - range from 1/100 to 1 times the luminosity for unpolarized protons.

  1. Flat-panel volume CT: fundamental principles, technology, and applications.

    Science.gov (United States)

    Gupta, Rajiv; Cheung, Arnold C; Bartling, Soenke H; Lisauskas, Jennifer; Grasruck, Michael; Leidecker, Christianne; Schmidt, Bernhard; Flohr, Thomas; Brady, Thomas J

    2008-01-01

    Flat-panel volume computed tomography (CT) systems have an innovative design that allows coverage of a large volume per rotation, fluoroscopic and dynamic imaging, and high spatial resolution that permits visualization of complex human anatomy such as fine temporal bone structures and trabecular bone architecture. In simple terms, flat-panel volume CT scanners can be thought of as conventional multidetector CT scanners in which the detector rows have been replaced by an area detector. The flat-panel detector has wide z-axis coverage that enables imaging of entire organs in one axial acquisition. Its fluoroscopic and angiographic capabilities are useful for intraoperative and vascular applications. Furthermore, the high-volume coverage and continuous rotation of the detector may enable depiction of dynamic processes such as coronary blood flow and whole-brain perfusion. Other applications in which flat-panel volume CT may play a role include small-animal imaging, nondestructive testing in animal survival surgeries, and tissue-engineering experiments. Such versatility has led some to predict that flat-panel volume CT will gain importance in interventional and intraoperative applications, especially in specialties such as cardiac imaging, interventional neuroradiology, orthopedics, and otolaryngology. However, the contrast resolution of flat-panel volume CT is slightly inferior to that of multidetector CT, a higher radiation dose is needed to achieve a comparable signal-to-noise ratio, and a slower scintillator results in a longer scanning time.

  2. Industrial Fuel Gas Demonstration Plant Program. Volume 1. Demonstration plant environmental analysis (Deliverable No. 27)

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Robert W.; Swift, Richard J.; Krause, Arthur J.; Berkey, Edgar

    1979-08-01

    This environmental report describes the proposed action to construct, test and operate a coal gasification demonstration plant in Memphis, Tennessee, under the co-sponsorship of the Memphis Light, Gas and Water Division (MLGW) and the US Department of Energy (DOE). This document is Volume I of a three-volume Environmental Report. Volume I consists of the Summary, Introduction and the Description of the Proposed Action. Volume II consists of the Description of the Existing Environment. Volume III contains the Environmental Impacts of the Proposed Action, Mitigating Measures and Alternatives to the Proposed Action.

  3. Residual volume in vials of antibiotics used in pediatrics.

    Science.gov (United States)

    Chaves, Caroline Magna Pessoa; Bezerra, Carolina Martins; Lima, Francisca Elisângela Teixeira; Cardoso, Maria Vera Lúcia Moreira Leitão; Fonseca, Said Gonçalves da Cruz; Silva, Viviane Martins da

    2017-06-12

    Quantifying residual volume contained in vials of antibiotics used in pediatrics. This is an experiment involving samples from vials of antibiotics used in a pediatric hospital. Residual volume was identified by calculating the difference in weight measurement before and after the vials were washed. Evaluation of the residual volume difference in the vials was determined by the Wilcoxon non-parametric test for a sample and established at a significance level of 5%. 105 samples of antibiotics were selected. The correct use of the antibiotics oxacillin (88.57%) and ceftriaxone (94.28%) predominated with low residual values. The same did not occur for procaine benzylpenicillin + potassium benzylpenicillin, since a greater residual volume was discarded in 74.28% of the vials. We highlight the need for improvements in managing antibiotics in the institution under study, so that the excess volume of the antibiotics in the vials is used within the acceptable stable time. It is also necessary that the disposal of the residual volume be adequately disposed, since it presents a risk to public health and the environment. Quantificar o volume residual contido em frascos-ampola de antibióticos utilizados na pediatria. Trata-se de um experimento com amostras de frascos-ampola de antibióticos utilizados em hospital pediátrico. O volume residual foi identificado calculando-se a diferença da aferição do peso antes e após a lavagem do frasco-ampola. A avaliação da diferença dos volumes residuais nos frascos-ampola foi determinada pelo teste não paramétrico de Wilcoxon para uma amostra e estabelecido o nível de significância de 5%. Foram selecionadas 105 amostras de antibióticos. Predominou o correto aproveitamento dos antibióticos oxacilina (88,57%) e ceftriaxona (94,28%), com baixos valores residuais. O mesmo não ocorreu com a benzilpenicilina procaína + potássica, pois em 74,28% dos frascos houve descarte de volume residual superior. Destaca-se a necessidade de

  4. Power-aware testing and test strategies for low power devices

    CERN Document Server

    Girard, Patrick; Wen, Xiaoqing

    2010-01-01

    Power-aware testing methods for conventional circuits and systems are explored in this volume, while providing safe testing techniques without compromising reliability. State-of-the-art industrial practices are discusses, as well as EDA solutions.

  5. Testing? Testing? In Literature?

    Science.gov (United States)

    Purves, Alan C.

    The assumptions behind secondary school literature course tests--whether asking students to recall aspects of literary works, to relate literary works to each other, or to analyze unfamiliar literary works--are open to question. They fail to acknowledge some of the most important aspects of literature which, if properly taught, should provide a…

  6. Test Under Test

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    China’s national college entrance examination, regarded as a make-or-break test by many students, leaves much to be desired “We’ve bribed the exam supervisors, paying each one 20,000 yuan. They will make everything go smooth during the exams,” Li Feng, a teacher from No.2 High School in

  7. Volume dilatation in a polycarbonate blend at varying strain rates

    Science.gov (United States)

    Hiermaier, S.; Huberth, F.

    2012-05-01

    Impact loaded polymers show a variety of strain-rate dependent mechanical properties in their elastic, plastic and failure behaviour. In contrast to purely crystalline materials, the volume of polymeric materials can significantly change under irreversible deformations. In this paper, uni-axial tensile tests were performed in order to measure the dilatation in the Polycarbonate-Acrylnitril-Butadien-Styrol (PC-ABS) Bayblend T65. The accumulation of dilatation was measured at deformation speeds of 0.1 and 500 [ mm/ s]. Instrumented with a pair of two high-speed cameras, volume segments in the samples were observed. The change in volume was quantified as relation between the deformed and initial volumes of the segments. It was observed that the measured dilatations are of great significance for the constitutive models. This is specifically demonstrated through comparisons of stress-strain relations derived from the two camera-perspectives with isochoric relations based on single-surface observations of the same experiments.

  8. Test plan :

    Energy Technology Data Exchange (ETDEWEB)

    Dwyer, Stephen F.

    2013-05-01

    This test plan is a document that provides a systematic approach to the planned testing of rooftop structures to determine their actual load carrying capacity. This document identifies typical tests to be performed, the responsible parties for testing, the general feature of the tests, the testing approach, test deliverables, testing schedule, monitoring requirements, and environmental and safety compliance.

  9. CHLORIDE WASHER PERFORMACE TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, J; David Best, D; Robert Pierce, R

    2007-11-30

    Testing was performed to determine the chloride (Cl-) removal capabilities of the Savannah River National Laboratory (SRNL) designed and built Cl- washing equipment intended for HB-Line installation. The equipment to be deployed was tested using a cerium oxide (CeO2) based simulant in place of the 3013 plutonium oxide (PuO2) material. Two different simulant mixtures were included in this testing -- one having higher Cl- content than the other. The higher Cl- simulant was based on K-Area Interim Surveillance Inspection Program (KIS) material with Cl- content approximately equal to 70,000 ppm. The lower Cl- level simulant was comparable to KIS material containing approximately 8,000-ppm Cl- content. The performance testing results indicate that the washer is capable of reducing the Cl- content of both surrogates to below 200 ppm with three 1/2-liter washes of 0.1M sodium hydroxide (NaOH) solution. Larger wash volumes were used with similar results - all of the prescribed test parameters consistently reduced the Cl- content of the surrogate to a value below 200 ppm Cl- in the final washed surrogate material. The washer uses a 20-micron filter to retain the surrogate solids. Tests showed that 0.16-0.41% of the insoluble fraction of the starting mass passed through the 20-micron filter. The solids retention performance indicates that the fissile masses passing through the 20-micron filter should not exceed the waste acceptance criteria for discard in grout to TRU waste. It is recommended that additional testing be pursued for further verification and optimization purposes. It is likely that wash volumes smaller than those tested could still reduce the Cl- values to acceptable levels. Along with reduced wash volumes, reuse of the third wash volume (in the next run processed) should be tested as a wash solution minimization plan. A 67% reduction in the number of grouted paint pails could be realized if wash solution minimization testing returned acceptable results.

  10. Thyroid Tests

    Science.gov (United States)

    ... calories and how fast your heart beats. Thyroid tests check how well your thyroid is working. They ... thyroid diseases such as hyperthyroidism and hypothyroidism. Thyroid tests include blood tests and imaging tests. Blood tests ...

  11. Pinworm test

    Science.gov (United States)

    Oxyuriasis test; Enterobiasis test; Tape test ... diagnose this infection is to do a tape test. The best time to do this is in ... lay their eggs at night. Steps for the test are: Firmly press the sticky side of a ...

  12. Insular volume reduction in schizophrenia.

    Science.gov (United States)

    Saze, Teruyasu; Hirao, Kazuyuki; Namiki, Chihiro; Fukuyama, Hidenao; Hayashi, Takuji; Murai, Toshiya

    2007-12-01

    Structural and functional abnormalities of the insular cortex have been reported in patients with schizophrenia. Most studies have shown that the insular volumes in schizophrenia patients are smaller than those of healthy people. As the insular cortex is functio-anatomically divided into anterior and posterior subdivisons, recent research is focused on uncovering a specific subdivisional abnormality of the insula in patients with schizophrenia. A recent ROI-based volumetric MRI study demonstrated specific left anterior insular volume reduction in chronic schizophrenia patients (Makris N, Goldstein J, Kennedy D, Hodge S, Caviness V, Faraone S, Tsuang M, Seidman L (2006) Decreased volume of left and total anterior insular lobule in schizophrenia. Schizophr Res 83:155-171). On the other hand, our VBM-based volumetric study revealed a reduction in right posterior insular volume (Yamada M, Hirao K, Namiki C, Hanakawa T, Fukuyama H, Hayashi T, Murai T (2007) Social cognition and frontal lobe pathology in schizophrenia: a voxel-based morphometric study. NeuroImage 35:292-298). In order to address these controversial results, ROI-based subdivisional volumetry was performed using the MRI images from the same population we analyzed in our previous VBM-study. The sample group comprised 20 schizophrenia patients and 20 matched healthy controls. Patients with schizophrenia showed a global reduction in insular gray matter volumes relative to healthy comparison subjects. In a simple comparison of the volumes of each subdivision between the groups, a statistically significant volume reduction in patients with schizophrenia was demonstrated only in the right posterior insula. This study suggests that insular abnormalities in schizophrenia would include anterior as well as posterior parts. Each subdivisional abnormality may impact on different aspects of the pathophysiology and psychopathology of schizophrenia; these relationships should be the focus of future research.

  13. A new electric method for non-invasive continuous monitoring of stroke volume and ventricular volume-time curves

    Directory of Open Access Journals (Sweden)

    Konings Maurits K

    2012-08-01

    Full Text Available Abstract Background In this paper a new non-invasive, operator-free, continuous ventricular stroke volume monitoring device (Hemodynamic Cardiac Profiler, HCP is presented, that measures the average stroke volume (SV for each period of 20 seconds, as well as ventricular volume-time curves for each cardiac cycle, using a new electric method (Ventricular Field Recognition with six independent electrode pairs distributed over the frontal thoracic skin. In contrast to existing non-invasive electric methods, our method does not use the algorithms of impedance or bioreactance cardiography. Instead, our method is based on specific 2D spatial patterns on the thoracic skin, representing the distribution, over the thorax, of changes in the applied current field caused by cardiac volume changes during the cardiac cycle. Since total heart volume variation during the cardiac cycle is a poor indicator for ventricular stroke volume, our HCP separates atrial filling effects from ventricular filling effects, and retrieves the volume changes of only the ventricles. Methods ex-vivo experiments on a post-mortem human heart have been performed to measure the effects of increasing the blood volume inside the ventricles in isolation, leaving the atrial volume invariant (which can not be done in-vivo. These effects have been measured as a specific 2D pattern of voltage changes on the thoracic skin. Furthermore, a working prototype of the HCP has been developed that uses these ex-vivo results in an algorithm to decompose voltage changes, that were measured in-vivo by the HCP on the thoracic skin of a human volunteer, into an atrial component and a ventricular component, in almost real-time (with a delay of maximally 39 seconds. The HCP prototype has been tested in-vivo on 7 human volunteers, using G-suit inflation and deflation to provoke stroke volume changes, and LVot Doppler as a reference technique. Results The ex-vivo measurements showed that ventricular filling

  14. Molecular mobility with respect to accessible volume in Monte Carlo lattice model for polymers

    Science.gov (United States)

    Diani, J.; Gilormini, P.

    2017-02-01

    A three-dimensional cubic Monte Carlo lattice model is considered to test the impact of volume on the molecular mobility of amorphous polymers. Assuming classic polymer chain dynamics, the concept of locked volume limiting the accessible volume around the polymer chains is introduced. The polymer mobility is assessed by its ability to explore the entire lattice thanks to reptation motions. When recording the polymer mobility with respect to the lattice accessible volume, a sharp mobility transition is observed as witnessed during glass transition. The model ability to reproduce known actual trends in terms of glass transition with respect to material parameters, is also tested.

  15. Association of basal forebrain volumes and cognition in normal aging.

    Science.gov (United States)

    Wolf, D; Grothe, M; Fischer, F U; Heinsen, H; Kilimann, I; Teipel, S; Fellgiebel, A

    2014-01-01

    The basal forebrain cholinergic system (BFCS) is known to undergo moderate neurodegenerative alterations during normal aging and severe atrophy in Alzheimer's disease (AD). It has been suggested that functional and structural alterations of the BFCS mediate cognitive performance in normal aging and AD. But, it is still unclear to what extend age-associated cognitive decline can be related to BFCS in normal aging. We analyzed the relationship between BFCS volume and cognition using MRI and a comprehensive neuropsychological test battery in a cohort of 43 healthy elderly subjects spanning the age range from 60 to 85 years. Most notably, we found significant associations between general intelligence and BFCS volumes, specifically within areas corresponding to posterior nuclei of the nucleus basalis of Meynert (Ch4p) and the nucleus subputaminalis (NSP). Associations between specific cognitive domains and BFCS volumes were less pronounced. Supplementary analyses demonstrated that especially the volume of NSP but also the volume of Ch4p was related to the volume of widespread temporal, frontal, and parietal gray and white matter regions. Volumes of these gray and white matter regions were also related to general intelligence. Higher volumes of Ch4p and NSP may enhance the effectiveness of acetylcholine supply in related gray and white matter regions underlying general intelligence and hence explain the observed association between the volume of Ch4p as well as NSP and general intelligence. Since general intelligence is known to attenuate the degree of age-associated cognitive decline and the risk of developing late-onset AD, the BFCS might, besides the specific contribution to the pathophysiology in AD, constitute a mechanism of brain resilience in normal aging.

  16. How do walking, standing, and resting influence transtibial amputee residual limb fluid volume?

    Directory of Open Access Journals (Sweden)

    Joan E. Sanders, PhD

    2014-08-01

    Full Text Available The purpose of this research was to determine how fluid volume changes in the residual limbs of people with transtibial amputation were affected by activity during test sessions with equal durations of resting, standing, and walking. Residual limb extracellular fluid volume was measured using biompedance analysis in 24 participants. Results showed that all subjects lost fluid volume during standing with equal weight-bearing, averaging a loss rate of –0.4%/min and a mean loss over the 25 min test session of 2.6% (standard deviation [SD] 1.1. Sixteen subjects gained limb fluid volume during walking (mean gain of 1.0% [SD 2.5], and fifteen gained fluid volume during rest (mean gain of 1.0% [SD 2.2]. Walking explained only 39.3% of the total session fluid volume change. There was a strong correlation between walk and rest fluid volume changes (−0.81. Subjects with peripheral arterial disease experienced relatively high fluid volume gains during sitting but minimal changes or losses during sit-to-stand and stand-to-sit transitioning. Healthy female subjects experienced high fluid volume changes during transitioning from sit-to-stand and stand-to-sit. The differences in fluid volume response among subjects suggest that volume accommodation technologies should be matched to the activity-dependent fluid transport characteristics of the individual prosthesis user.

  17. Deterministic Circular Self Test Path

    Institute of Scientific and Technical Information of China (English)

    WEN Ke; HU Yu; LI Xiaowei

    2007-01-01

    Circular self test path (CSTP) is an attractive technique for testing digital integrated circuits(IC) in the nanometer era, because it can easily provide at-speed test with small test data volume and short test application time. However, CSTP cannot reliably attain high fault coverage because of difficulty of testing random-pattern-resistant faults. This paper presents a deterministic CSTP (DCSTP) structure that consists of a DCSTP chain and jumping logic, to attain high fault coverage with low area overhead. Experimental results on ISCAS'89 benchmarks show that 100% fault coverage can be obtained with low area overhead and CPU time, especially for large circuits.

  18. Minutes of the Explosives Safety Seminar (25th) Held in Anaheim, California on 18-20 August 1992. Volume 1

    Science.gov (United States)

    1992-08-20

    volume propylene glycol * 25% by volume water * 25% by volume aqueous film -forming foam (AFFF) NSN No. 4210-01-056-8343 PROOF TESTS AT UTAH TEST AND...in processing, as well as improving the aqueous ammonia degradation rate, triacetin was used as a plasticizer. The amount of triacetin ranged from 15...exceeded. The bags in the baghouse did not appear to be properly coated and should be caked more thoroughly for further tests. The chloride being fed at

  19. Image plane sweep volume illumination.

    Science.gov (United States)

    Sundén, Erik; Ynnerman, Anders; Ropinski, Timo

    2011-12-01

    In recent years, many volumetric illumination models have been proposed, which have the potential to simulate advanced lighting effects and thus support improved image comprehension. Although volume ray-casting is widely accepted as the volume rendering technique which achieves the highest image quality, so far no volumetric illumination algorithm has been designed to be directly incorporated into the ray-casting process. In this paper we propose image plane sweep volume illumination (IPSVI), which allows the integration of advanced illumination effects into a GPU-based volume ray-caster by exploiting the plane sweep paradigm. Thus, we are able to reduce the problem complexity and achieve interactive frame rates, while supporting scattering as well as shadowing. Since all illumination computations are performed directly within a single rendering pass, IPSVI does not require any preprocessing nor does it need to store intermediate results within an illumination volume. It therefore has a significantly lower memory footprint than other techniques. This makes IPSVI directly applicable to large data sets. Furthermore, the integration into a GPU-based ray-caster allows for high image quality as well as improved rendering performance by exploiting early ray termination. This paper discusses the theory behind IPSVI, describes its implementation, demonstrates its visual results and provides performance measurements.

  20. Control volume based hydrocephalus research

    Science.gov (United States)

    Cohen, Benjamin; Voorhees, Abram; Wei, Timothy

    2008-11-01

    Hydrocephalus is a disease involving excess amounts of cerebral spinal fluid (CSF) in the brain. Recent research has shown correlations to pulsatility of blood flow through the brain. However, the problem to date has presented as too complex for much more than statistical analysis and understanding. This talk will highlight progress on developing a fundamental control volume approach to studying hydrocephalus. The specific goals are to select physiologically control volume(s), develop conservation equations along with the experimental capabilities to accurately quantify terms in those equations. To this end, an in vitro phantom is used as a simplified model of the human brain. The phantom's design consists of a rigid container filled with a compressible gel. The gel has a hollow spherical cavity representing a ventricle and a cylindrical passage representing the aquaducts. A computer controlled piston pump supplies pulsatile volume fluctuations into and out of the flow phantom. MRI is used to measure fluid velocity, and volume change as functions of time. Independent pressure measurements and flow rate measurements are used to calibrate the MRI data. These data are used as a framework for future work with live patients.

  1. Low Cost Scan Test by Test Correlation Utilization

    Institute of Scientific and Technical Information of China (English)

    Ozgur Sinanoglu

    2007-01-01

    Scan-based testing methodologies remedy the testability problem of sequential circuits; yet they suffer from prolonged test time and excessive test power due to numerous shift operations. The correlation among test data along with the high density of the unspecified bits in test data enables the utilization of the existing test data in the scan chain for the generation of the subsequent test stimulus, thus reducing both test time and test data volume. We propose a pair of scan approaches in this paper; in the first approach, a test stimulus partially consists of the preceding stimulus, while in the second approach, a test stimulus partially consists of the preceding test response bits. Both proposed scan-based test schemes access only a subset of scan cells for loading the subsequent test stimulus while freezing the remaining scan cells with the preceding test data, thus decreasing scan chain transitions during shift operations. The proposed scan architecture is coupled with test data manipulation techniques which include test stimuli ordering and partitioning algorithms, boosting test time reductions. The experimental results confirm that test time reductions exceeding 97%,and test power reductions exceeding 99% can be achieved by the proposed scan-based testing methodologies on larger ISCAS89 benchmark circuits.

  2. Pineal Gland Volume Assessed by MRI and Its Correlation with 6-Sulfatoxymelatonin Levels among Older Men.

    Science.gov (United States)

    Sigurdardottir, Lara G; Markt, Sarah C; Sigurdsson, Sigurdur; Aspelund, Thor; Fall, Katja; Schernhammer, Eva; Rider, Jennifer R; Launer, Lenore; Harris, Tamara; Stampfer, Meir J; Gudnason, Vilmundur; Czeisler, Charles A; Lockley, Steven W; Valdimarsdottir, Unnur A; Mucci, Lorelei A

    2016-10-01

    The pineal gland produces the hormone melatonin, and its volume may influence melatonin levels. We describe an innovative method for estimating pineal volume in humans and present the association of pineal parenchyma volume with levels of the primary melatonin metabolite, 6-sulfatoxymelatonin. We selected a random sample of 122 older Icelandic men nested within the AGES-Reykjavik cohort and measured their total pineal volume, their parenchyma volume, and the extent of calcification and cysts. For volume estimations we used manual segmentation of magnetic resonance images in the axial plane with simultaneous side-by-side view of the sagittal and coronal plane. We used multivariable adjusted linear regression models to estimate the association of pineal parenchyma volume and baseline characteristics, including 6-sulfatoxymelatonin levels. We used logistic regression to test for differences in first morning urinary 6-sulfatoxymelatonin levels among men with or without cystic or calcified glands. The pineal glands varied in volume, shape, and composition. Cysts were present in 59% of the glands and calcifications in 21%. The mean total pineal volume measured 207 mm(3) (range 65-536 mm(3)) and parenchyma volume 178 mm(3) (range 65-503 mm(3)). In multivariable-adjusted models, pineal parenchyma volume was positively correlated with 6-sulfatoxymelatonin levels (β = 0.52, p pineal assessment, we found pineal parenchyma volume to be positively correlated with 6-sulfatoxymelatonin levels, in line with other recent studies.

  3. Update on CMH-17 Volume 5: Ceramic Matrix Composites

    Science.gov (United States)

    David, Kaia; Pierce, Jennifer; Kiser, James; Keith, William P.; Wilson, Gregory S.

    2015-01-01

    CMC components are projected to enter service in commercial aircraft in 2016. A wide range of issues must be addressed prior to certification of this hardware. The Composite Materials Handbook-17, Volume 5 on ceramic matrix composites is being revised to support FAA certification of CMCs for hot structure and other elevated temperature applications. The handbook supports the development and use of CMCs through publishing and maintaining proven, reliable engineering information and standards that have been thoroughly reviewed. Volume 5 will contain detailed sections describing CMC materials processing, design analysis guidelines, testing procedures, and data analysis and acceptance. A review of the status of and plans for two of these areas, which are being addressed by the M and P Working Group and the Testing Working Group, will be presented along with a timeline for the preparation of CMH-17, Volume 5.

  4. Quantifying Volume Changing Perturbations in a Wave Chaotic System

    CERN Document Server

    Taddese, Biniyam Tesfaye; Moglie, Franco; Antonsen, Thomas M; Ott, Edward; Anlage, Steven M

    2012-01-01

    A sensor was developed to quantitatively measure perturbations which change the volume of a wave chaotic cavity while leaving its shape intact. The sensors work in the time domain by using either scattering fidelity of the transmitted signals or the classical analog of the Loschmidt echo. The sensors were tested experimentally by inducing volume changing perturbations to a one cubic meter pseudo-integrable, real-world cavity. Perturbations which caused a volume change that is as small as 54 parts in a million were quantitatively measured. These results were obtained by using electromagnetic waves with a wavelength of about $5cm$, therefore, the sensor is sensitive to extreme sub-wavelength changes of the boundaries of a cavity. The experimental results were compared with Finite Difference Time Domain (FDTD) simulation results, and good agreement was found. Furthermore, the sensor was tested using a frequency domain approach on a numerical model of the star graph, which is a representative wave chaotic system....

  5. Historical volume estimation and a structured method for calculating habitable volume for in-space and surface habitats

    Science.gov (United States)

    Simon, M.; Bobskill, M. R.; Wilhite, A.

    2012-11-01

    Habitable volume is an important spacecraft design figure of merit necessary to determine the required size of crewed space vehicles, or habitats. In order to design habitats for future missions and properly compare the habitable volumes of future habitat designs with historical spacecraft, consistent methods of both defining the required amount of habitable volume and estimating the habitable volume for a given layout are required. This paper provides a brief summary of historical habitable volume requirements and describes the appropriate application of requirements to various types of missions, particularly highlighting the appropriate application for various gravity environments. Then the proposed "Marching Grid Method", a structured automatic, numerical method to calculate habitable volume for a given habitat design, is described in detail. This method uses a set of geometric Boolean tests applied to a discrete set of points within the pressurized volume to numerically estimate the functionally usable and accessible space that comprises the habitable volume. The application of this method to zero gravity and nonzero gravity environments is also discussed. This proposed method is then demonstrated by calculating habitable volumes using two conceptual-level layouts of habitat designs, one for each type of gravity environment. These include the US Laboratory Module on ISS and the Scenario 12.0 Pressurized Core Module from the recent NASA Lunar Surface Systems studies. Results of this study include a description of the effectiveness of this method for various resolutions of the investigated grid, and commentary highlighting the use of this method to determine the overall utility of interior configurations for automatically evaluating interior layouts.

  6. 最大用力呼气流量-容积曲线法检测学龄期儿童肺功能的质量控制分析%Quality control for maximal expiratory lfow-volume curve as a pulmonary function test in school-age children

    Institute of Scientific and Technical Information of China (English)

    王群; 任亦欣; 刘永革; 皇惠杰; 向莉

    2015-01-01

    two groups. Results Eight hundred and sixty-two children underwent 2 367 MEFV manoeuvres, 97.8%of which met the start of test criterion for backward extrapolated volume (VBE) of less than 0.15 L, with the highest concordance in the≥6-year-old group and the lowest concordance in the 12-17-year-old group. Three hundred and eighty-one children (44.2%) met the end of test criterion for forced expiratory time (FET) and the concordance in children over 10 years of age was lower than that in children under 10 years of age (P<0.05). Differences in two best forced expiratory volume in first second (FEV1) and forced vital capacity (FVC) manoeuvres were within 150 mL in 91.9%and 84.8%, respectively, of the children. The parameters of quality control for spirometry were better for asthmatic children with abnormal pulmonary function compared with asthmatic children with normal pulmonary function (P<0.05). Conclusions Concordance with the start of test criteria and the manoeuvre repeatability criteria is high, whereas the concordance with the end of test criteria is low. It is suggested that the concordance with the FET criteria should be improved.

  7. The orbital volume measurement in patients with ventriculoperitoneal shunt.

    Science.gov (United States)

    Kim, Jong-Min; Chang, Moo-Hwan; Kyung, Sungeun E

    2015-01-01

    Enophthalmos occurs from the increased bony volume or decreased soft tissue volume in the orbit and can be caused in patients with long-term ventriculoperitoneal (VP) shunt. This study tried to find out the change of orbital volume by measuring the orbital volume before and after operation in adult patients who underwent VP shunt for hydrocephalus. The 2 evaluators measured orbital volume by using ITK-SNAP 2.4 program with double-blind test for computed tomography images before and after operation targeting 36 patients over the age of 18 who underwent VP shunt with pressure-controlled valve from 2003 to 2011. Wilcoxon matched-pairs signed-rank test of GraphPad software was used to statistically analyze the difference in orbital volume change before and after operation. In case of mean pre-op orbital volume of total 36 patients, the right was measured as 23.72 ± 4.65 cm(3), the left as 23.47 ± 4.61 cm(3), the post-op right as 24.67 ± 4.70 cm(3), and the left as 24.18 ± 4.63 cm(3), showing no statistically significant difference (P = 0.106). The mean pre-op orbital volume of 14 people (28 eyes) followed for more than 11 months was 25.06 ± 4.58 cm(3) in the right and 24.4 ± 5.02 cm(3) in the left and the mean post-op orbital volume was 27.0 ± 4.28 cm(3) in the right and 25.76 ± 3.92 cm(3) in the left, showing statistically significant differences in the change of the volume before and after shunt operation (P = 0.0057). In patients who maintain long-term shunt devices after VP shunt, remodeling of matured orbital bone may be caused due to the change in pressure gradient between cranial cavity and orbit and the possible occurrence of resulting secondary enophthalmos by increased orbital volume should be considered.

  8. Thermodynamic volume of cosmological solitons

    Science.gov (United States)

    Mbarek, Saoussen; Mann, Robert B.

    2017-02-01

    We present explicit expressions of the thermodynamic volume inside and outside the cosmological horizon of Eguchi-Hanson solitons in general odd dimensions. These quantities are calculable and well-defined regardless of whether or not the regularity condition for the soliton is imposed. For the inner case, we show that the reverse isoperimetric inequality is not satisfied for general values of the soliton parameter a, though a narrow range exists for which the inequality does hold. For the outer case, we find that the mass Mout satisfies the maximal mass conjecture and the volume is positive. We also show that, by requiring Mout to yield the mass of dS spacetime when the soliton parameter vanishes, the associated cosmological volume is always positive.

  9. Age estimation from canine volumes.

    Science.gov (United States)

    De Angelis, Danilo; Gaudio, Daniel; Guercini, Nicola; Cipriani, Filippo; Gibelli, Daniele; Caputi, Sergio; Cattaneo, Cristina

    2015-08-01

    Techniques for estimation of biological age are constantly evolving and are finding daily application in the forensic radiology field in cases concerning the estimation of the chronological age of a corpse in order to reconstruct the biological profile, or of a living subject, for example in cases of immigration of people without identity papers from a civil registry. The deposition of teeth secondary dentine and consequent decrease of pulp chamber in size are well known as aging phenomena, and they have been applied to the forensic context by the development of age estimation procedures, such as Kvaal-Solheim and Cameriere methods. The present study takes into consideration canines pulp chamber volume related to the entire teeth volume, with the aim of proposing new regression formulae for age estimation using 91 cone beam computerized scans and a freeware open-source software, in order to permit affordable reproducibility of volumes calculation.

  10. Thermodynamic Volume of Cosmological Solitons

    CERN Document Server

    Mbarek, Saoussen

    2016-01-01

    We present explicit expressions of the thermodynamic volume inside and outside the cosmological horizon of Eguchi-Hanson solitons in general odd dimensions. These quantities are calculable and well-defined regardless of whether or not the regularity condition for the soliton is imposed. For the inner case, we show that the reverse isoperimetric inequality is not satisfied for general values of the soliton parameter $a$, though a narrow range exists for which the inequality does hold. For the outer case, we find that the mass $M_{out}$ satisfies the maximal mass conjecture and the volume is positive. We also show that, by requiring $M_{out}$ to yield the mass of dS spacetime when the soliton parameter vanishes, the associated cosmological volume is always positive.

  11. Dictionary Based Segmentation in Volumes

    DEFF Research Database (Denmark)

    Emerson, Monica Jane; Jespersen, Kristine Munk; Jørgensen, Peter Stanley

    2015-01-01

    We present a method for supervised volumetric segmentation based on a dictionary of small cubes composed of pairs of intensity and label cubes. Intensity cubes are small image volumes where each voxel contains an image intensity. Label cubes are volumes with voxelwise probabilities for a given...... label. The segmentation process is done by matching a cube from the volume, of the same size as the dictionary intensity cubes, to the most similar intensity dictionary cube, and from the associated label cube we get voxel-wise label probabilities. Probabilities from overlapping cubes are averaged...... and hereby we obtain a robust label probability encoding. The dictionary is computed from labeled volumetric image data based on weighted clustering. We experimentally demonstrate our method using two data sets from material science – a phantom data set of a solid oxide fuel cell simulation for detecting...

  12. Rockets and People. Volume 1

    Science.gov (United States)

    Chertok, Boris E; Siddiqi, Asif A. (Editor)

    2005-01-01

    Much has been written in the West on the history of the Soviet space program but few Westerners have read direct first-hand accounts of the men and women who were behind the many Russian accomplishments in exploring space.The memoirs of Academician Boris Chertok, translated from the original Russian, fills that gap.Chertok began his career as an electrician in 1930 at an aviation factory near Moscow.Twenty-seven years later, he became deputy to the founding figure of the Soviet space program, the mysterious Chief Designer Sergey Korolev. Chertok s sixty-year-long career and the many successes and failures of the Soviet space program constitute the core of his memoirs, Rockets and People. These writings are spread over four volumes. This is volume I. Academician Chertok not only describes and remembers, but also elicits and extracts profound insights from an epic story about a society s quest to explore the cosmos. In Volume 1, Chertok describes his early years as an engineer and ends with the mission to Germany after the end of World War II when the Soviets captured Nazi missile technology and expertise. Volume 2 takes up the story with the development of the world s first intercontinental ballistic missile ICBM) and ends with the launch of Sputnik and the early Moon probes. In Volume 3, Chertok recollects the great successes of the Soviet space program in the 1960s including the launch of the world s first space voyager Yuriy Gagarin as well as many events connected with the Cold War. Finally, in Volume 4, Chertok meditates at length on the massive Soviet lunar project designed to beat the Americans to the Moon in the 1960s, ending with his remembrances of the Energiya-Buran project.

  13. Gas volume contents within a container, smart volume instrument

    Science.gov (United States)

    Kelley, Anthony R. (Inventor); Van Buskirk, Paul D. (Inventor)

    2008-01-01

    A method for determining the volume of an incompressible gas in a system including incompressible substances in a zero-gravity environment. The method includes inducing a volumetric displacement within a container and measuring the resulting pressure change. From this data, the liquid level can be determined.

  14. Laboratory Diagnostics Market in East Africa: A Survey of Test Types, Test Availability, and Test Prices in Kampala, Uganda.

    Directory of Open Access Journals (Sweden)

    Lee F Schroeder

    Full Text Available Diagnostic laboratory tests are routinely defined in terms of their sensitivity, specificity, and ease of use. But the actual clinical impact of a diagnostic test also depends on its availability and price. This is especially true in resource-limited settings such as sub-Saharan Africa. We present a first-of-its-kind report of diagnostic test types, availability, and prices in Kampala, Uganda.Test types (identity and availability were based on menus and volumes obtained from clinical laboratories in late 2011 in Kampala using a standard questionnaire. As a measure of test availability, we used the Availability Index (AI. AI is the combined daily testing volumes of laboratories offering a given test, divided by the combined daily testing volumes of all laboratories in Kampala. Test prices were based on a sampling of prices collected in person and via telephone surveys in 2015.Test volumes and menus were obtained for 95% (907/954 of laboratories in Kampala city. These 907 laboratories offered 100 different test types. The ten most commonly offered tests in decreasing order were Malaria, HCG, HIV serology, Syphilis, Typhoid, Urinalysis, Brucellosis, Stool Analysis, Glucose, and ABO/Rh. In terms of AI, the 100 tests clustered into three groups: high (12 tests, moderate (33 tests, and minimal (55 tests availability. 50% and 36% of overall availability was provided through private and public laboratories, respectively. Point-of-care laboratories contributed 35% to the AI of high availability tests, but only 6% to the AI of the other tests. The mean price of the most commonly offered test types was $2.62 (range $1.83-$3.46.One hundred different laboratory test types were in use in Kampala in late 2011. Both public and private laboratories were critical to test availability. The tests offered in point-of-care laboratories tended to be the most available tests. Prices of the most common tests ranged from $1.83-$3.46.

  15. Laboratory Diagnostics Market in East Africa: A Survey of Test Types, Test Availability, and Test Prices in Kampala, Uganda.

    Science.gov (United States)

    Schroeder, Lee F; Elbireer, Ali; Jackson, J Brooks; Amukele, Timothy K

    2015-01-01

    Diagnostic laboratory tests are routinely defined in terms of their sensitivity, specificity, and ease of use. But the actual clinical impact of a diagnostic test also depends on its availability and price. This is especially true in resource-limited settings such as sub-Saharan Africa. We present a first-of-its-kind report of diagnostic test types, availability, and prices in Kampala, Uganda. Test types (identity) and availability were based on menus and volumes obtained from clinical laboratories in late 2011 in Kampala using a standard questionnaire. As a measure of test availability, we used the Availability Index (AI). AI is the combined daily testing volumes of laboratories offering a given test, divided by the combined daily testing volumes of all laboratories in Kampala. Test prices were based on a sampling of prices collected in person and via telephone surveys in 2015. Test volumes and menus were obtained for 95% (907/954) of laboratories in Kampala city. These 907 laboratories offered 100 different test types. The ten most commonly offered tests in decreasing order were Malaria, HCG, HIV serology, Syphilis, Typhoid, Urinalysis, Brucellosis, Stool Analysis, Glucose, and ABO/Rh. In terms of AI, the 100 tests clustered into three groups: high (12 tests), moderate (33 tests), and minimal (55 tests) availability. 50% and 36% of overall availability was provided through private and public laboratories, respectively. Point-of-care laboratories contributed 35% to the AI of high availability tests, but only 6% to the AI of the other tests. The mean price of the most commonly offered test types was $2.62 (range $1.83-$3.46). One hundred different laboratory test types were in use in Kampala in late 2011. Both public and private laboratories were critical to test availability. The tests offered in point-of-care laboratories tended to be the most available tests. Prices of the most common tests ranged from $1.83-$3.46.

  16. MPCV Exercise Operational Volume Analysis

    Science.gov (United States)

    Godfrey, A.; Humphreys, B.; Funk, J.; Perusek, G.; Lewandowski, B. E.

    2017-01-01

    In order to minimize the loss of bone and muscle mass during spaceflight, the Multi-purpose Crew Vehicle (MPCV) will include an exercise device and enough free space within the cabin for astronauts to use the device effectively. The NASA Digital Astronaut Project (DAP) has been tasked with using computational modeling to aid in determining whether or not the available operational volume is sufficient for in-flight exercise.Motion capture data was acquired using a 12-camera Smart DX system (BTS Bioengineering, Brooklyn, NY), while exercisers performed 9 resistive exercises without volume restrictions in a 1g environment. Data were collected from two male subjects, one being in the 99th percentile of height and the other in the 50th percentile of height, using between 25 and 60 motion capture markers. Motion capture data was also recorded as a third subject, also near the 50th percentile in height, performed aerobic rowing during a parabolic flight. A motion capture system and algorithms developed previously and presented at last years HRP-IWS were utilized to collect and process the data from the parabolic flight [1]. These motions were applied to a scaled version of a biomechanical model within the biomechanical modeling software OpenSim [2], and the volume sweeps of the motions were visually assessed against an imported CAD model of the operational volume. Further numerical analysis was performed using Matlab (Mathworks, Natick, MA) and the OpenSim API. This analysis determined the location of every marker in space over the duration of the exercise motion, and the distance of each marker to the nearest surface of the volume. Containment of the exercise motions within the operational volume was determined on a per-exercise and per-subject basis. The orientation of the exerciser and the angle of the footplate were two important factors upon which containment was dependent. Regions where the exercise motion exceeds the bounds of the operational volume have been

  17. Foaming volume and foam stability

    Science.gov (United States)

    Ross, Sydney

    1947-01-01

    A method of measuring foaming volume is described and investigated to establish the critical factors in its operation. Data on foaming volumes and foam stabilities are given for a series of hydrocarbons and for a range of concentrations of aqueous ethylene-glycol solutions. It is shown that the amount of foam formed depends on the machinery of its production as well as on properties of the liquid, whereas the stability of the foam produced, within specified mechanical limitations, is primarily a function of the liquid.

  18. Disorders of erythrocyte volume homeostasis.

    Science.gov (United States)

    Glogowska, E; Gallagher, P G

    2015-05-01

    Inherited disorders of erythrocyte volume homeostasis are a heterogeneous group of rare disorders with phenotypes ranging from dehydrated to overhydrated erythrocytes. Clinical, laboratory, physiologic, and genetic heterogeneities characterize this group of disorders. A series of recent reports have provided novel insights into our understanding of the genetic bases underlying some of these disorders of red cell volume regulation. This report reviews this progress in understanding determinants that influence erythrocyte hydration and how they have yielded a better understanding of the pathways that influence cellular water and solute homeostasis.

  19. 36 CFR 223.36 - Volume determination.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Volume determination. 223.36... Volume determination. (a) Timber sale contracts may provide for volume determination by scaling... the contract or permit provides for the determination of volume by tree measurement and the timber has...

  20. 40 CFR 791.48 - Production volume.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Production volume. 791.48 Section 791... (CONTINUED) DATA REIMBURSEMENT Basis for Proposed Order § 791.48 Production volume. (a) Production volume.... (b) For the purpose of determining fair reimbursement shares, production volume shall include amounts...