Critical Review of Path Integral Formulation
Fujita, Takehisa
2008-01-01
The path integral formulation in quantum mechanics corresponds to the first quantization since it is just to rewrite the quantum mechanical amplitude into many dimensional integrations over discretized coordinates $x_n$. However, the path integral expression cannot be connected to the dynamics of classical mechanics, even though, superficially, there is some similarity between them. Further, the field theory path integral in terms of many dimensional integrations over fields does not correspond to the field quantization. We clarify the essential difference between Feynman's original formulation of path integral in QED and the modern version of the path integral method prevailing in lattice field theory calculations, and show that the former can make a correct second quantization while the latter cannot quantize fields at all and its physical meaning is unknown.
Henry, Donald P., Jr.; Banerjee, Prasanta K.
1988-01-01
New two- and three-dimensional BEM formulations are developed for steady-state and transient uncoupled thermoelasticity. These new procedures differ from previous work in that additional surface of volume integration is not required to incorporate thermal loads in the analysis. Instead, thermal body forces are introduced in the BEM system via particular integrals. The present formulation is implemented in a general-purpose multiregion system, and examples are presented to demonstrate the accuracy and versatility of the method.
Integrated Formulation of Beacon-Based Exception Analysis for Multimissions
Mackey, Ryan; James, Mark; Park, Han; Zak, Mickail
2003-01-01
Further work on beacon-based exception analysis for multimissions (BEAM), a method of real-time, automated diagnosis of a complex electromechanical systems, has greatly expanded its capability and suitability of application. This expanded formulation, which fully integrates physical models and symbolic analysis, is described. The new formulation of BEAM expands upon previous advanced techniques for analysis of signal data, utilizing mathematical modeling of the system physics, and expert-system reasoning,
Cleansing Formulations That Respect Skin Barrier Integrity
Directory of Open Access Journals (Sweden)
Russel M. Walters
2012-01-01
Full Text Available Surfactants in skin cleansers interact with the skin in several manners. In addition to the desired benefit of providing skin hygiene, surfactants also extract skin components during cleansing and remain in the stratum corneum (SC after rinsing. These side effects disrupt SC structure and degrade its barrier properties. Recent applications of vibrational spectroscopy and two-photon microscopy in skin research have provided molecular-level information to facilitate our understanding of the interaction between skin and surfactant. In the arena of commercial skin cleansers, technologies have been developed to produce cleansers that both cleanse and respect skin barrier. The main approach is to minimize surfactant interaction with skin through altering its solution properties. Recently, hydrophobically modified polymers (HMPs have been introduced to create skin compatible cleansing systems. At the presence of HMP, surfactants assemble into larger, more stable structures. These structures are less likely to penetrate the skin, thereby resulting in less aggressive cleansers and the integrity of the skin barrier is maintained. In this paper, we reviewed our recent findings on surfactant and SC interactions at molecular level and provided an overview of the HM technology for developing cleansers that respect skin barrier.
The path integral formulation of climate dynamics.
Directory of Open Access Journals (Sweden)
Antonio Navarra
Full Text Available The chaotic nature of the atmospheric dynamics has stimulated the applications of methods and ideas derived from statistical dynamics. For instance, ensemble systems are used to make weather predictions recently extensive, which are designed to sample the phase space around the initial condition. Such an approach has been shown to improve substantially the usefulness of the forecasts since it allows forecasters to issue probabilistic forecasts. These works have modified the dominant paradigm of the interpretation of the evolution of atmospheric flows (and oceanic motions to some extent attributing more importance to the probability distribution of the variables of interest rather than to a single representation. The ensemble experiments can be considered as crude attempts to estimate the evolution of the probability distribution of the climate variables, which turn out to be the only physical quantity relevant to practice. However, little work has been done on a direct modeling of the probability evolution itself. In this paper it is shown that it is possible to write the evolution of the probability distribution as a functional integral of the same kind introduced by Feynman in quantum mechanics, using some of the methods and results developed in statistical physics. The approach allows obtaining a formal solution to the Fokker-Planck equation corresponding to the Langevin-like equation of motion with noise. The method is very general and provides a framework generalizable to red noise, as well as to delaying differential equations, and even field equations, i.e., partial differential equations with noise, for example, general circulation models with noise. These concepts will be applied to an example taken from a simple ENSO model.
The Path Integral Formulation of Climate Dynamics
Navarra, Antonio; Tribbia, Joe; Conti, Giovanni
2013-01-01
The chaotic nature of the atmospheric dynamics has stimulated the applications of methods and ideas derived from statistical dynamics. For instance, ensemble systems are used to make weather predictions recently extensive, which are designed to sample the phase space around the initial condition. Such an approach has been shown to improve substantially the usefulness of the forecasts since it allows forecasters to issue probabilistic forecasts. These works have modified the dominant paradigm of the interpretation of the evolution of atmospheric flows (and oceanic motions to some extent) attributing more importance to the probability distribution of the variables of interest rather than to a single representation. The ensemble experiments can be considered as crude attempts to estimate the evolution of the probability distribution of the climate variables, which turn out to be the only physical quantity relevant to practice. However, little work has been done on a direct modeling of the probability evolution itself. In this paper it is shown that it is possible to write the evolution of the probability distribution as a functional integral of the same kind introduced by Feynman in quantum mechanics, using some of the methods and results developed in statistical physics. The approach allows obtaining a formal solution to the Fokker-Planck equation corresponding to the Langevin-like equation of motion with noise. The method is very general and provides a framework generalizable to red noise, as well as to delaying differential equations, and even field equations, i.e., partial differential equations with noise, for example, general circulation models with noise. These concepts will be applied to an example taken from a simple ENSO model. PMID:23840577
Surface integral formulations for the design of plasmonic nanostructures.
Forestiere, Carlo; Iadarola, Giovanni; Rubinacci, Guglielmo; Tamburrino, Antonello; Dal Negro, Luca; Miano, Giovanni
2012-11-01
Numerical formulations based on surface integral equations (SIEs) provide an accurate and efficient framework for the solution of the electromagnetic scattering problem by three-dimensional plasmonic nanostructures in the frequency domain. In this paper, we present a unified description of SIE formulations with both singular and nonsingular kernel and we study their accuracy in solving the scattering problem by metallic nanoparticles with spherical and nonspherical shape. In fact, the accuracy of the numerical solution, especially in the near zone, is of great importance in the analysis and design of plasmonic nanostructures, whose operation critically depends on the manipulation of electromagnetic hot spots. Four formulation types are considered: the N-combined region integral equations, the T-combined region integral equations, the combined field integral equations and the null field integral equations. A detailed comparison between their numerical solutions obtained for several nanoparticle shapes is performed by examining convergence rate and accuracy in both the far and near zone of the scatterer as a function of the number of degrees of freedom. A rigorous analysis of SIE formulations and their limitations can have a high impact on the engineering of numerous nano-scale optical devices such as plasmon-enhanced light emitters, biosensors, photodetectors, and nanoantennas.
Geometric formulations and variational integrators of discrete autonomous Birkhoff systems
Institute of Scientific and Technical Information of China (English)
Liu Shi-Xing; Liu Chang; Guo Yong-Xin
2011-01-01
The variational integrators of autonomous Birkhoff systems are obtained by the discrete variational principle. The geometric structure of the discrete autonomous Birkhoff system is formulated. The discretization of mathematical pendulum shows that the discrete variational method is as effective as symplectic scheme for the autonomous Birkhoff systems.
Engwirda, Darren; Marshall, John
2016-01-01
The development of a set of high-order accurate finite-volume formulations for evaluation of the pressure gradient force in layered ocean models is described. A pair of new schemes are presented, both based on an integration of the contact pressure force about the perimeter of an associated momentum control-volume. The two proposed methods differ in their choice of control-volume geometries. High-order accurate numerical integration techniques are employed in both schemes to account for non-linearities in the underlying equation-of-state definitions and thermodynamic profiles, and details of an associated vertical interpolation and quadrature scheme are discussed in detail. Numerical experiments are used to confirm the consistency of the two formulations, and it is demonstrated that the new methods maintain hydrostatic and thermobaric equilibrium in the presence of strongly-sloping layer-wise geometry, non-linear equation-of-state definitions and non-uniform vertical stratification profiles. Additionally, one...
Formulation of market strategies for Integrated Community Energy Systems (ICES)
Energy Technology Data Exchange (ETDEWEB)
None
1978-04-01
The ANL Energy and Environmental Systems Division has undertaken studies of implementation mechanisms and commercialization prospects for ''integrated community energy systems.'' Real Estate Research Corp. was commissioned to formulate marketing strategies appropriate to the implementation of ICES in the U.S. Objectives of this assignment are to: assist ICES program managers in formulating market strategies for the acceptance and widespread application of ICES systems; provide sufficient background information on the processes of development so that marketing strategies can be suitably tailored to particular concerns and characteristics of development projects; establish an information system for identifying areas, subareas, sites, or projects with substantial growth and development activity, as potential candidates for the application of ICES; test the information system to determine its potential usefulness for identifying candidate sites; and provide recommendations on strategies and techniques that might be used in a comprehensive marketing program for application of ICES systems. Chapter 2 presents information on the development process, which is used as a framework for other elements of the report. The project information system for identifying candidate projects for ICES applications is described in Chapter 3, and that system is subjected to a limited test and evaluation in Chapter 4. Description of the characteristics of development process appears in Chapter 5, and discussion of the formulation of marketing strategies in Chapter 6, and presentation of marketing techniques as part of an ICES marketing program in Chapter 7.
Energy Technology Data Exchange (ETDEWEB)
Reinhardt, Hugo [Tuebingen Univ. (Germany). Inst. fuer Theoretische Physik
2012-11-01
The first volume of this two-volume textbook gives a modern introduction to the quantum theory, which connects Feynman's path-integral formulation with the traditional operator formalism. In easily understandable form starting from the double-slit experiment the characteristic features and foundations of quantum theory are made accessible by means of the functional-integral approach. Just this approach makes a ''derivation'' of the Schroedinger equation from the principle of the interfering alternatives possible. In the following the author developes the traditional operator formulation of quantum mechanics, which is better suited for practical solution of elementary problems. However he then refers to the functional-integral approach, when this contributes to a better understanding. A further advance of this concept: The functional-integral approach facilitates essentially the later access to quantum field theory. The work is in like manner suited for the self-study as for the deepening accompanying of the course.
The functional integral formulation of the Schrieffer-Wolff transformation
Zamani, Farzaneh; Ribeiro, Pedro; Kirchner, Stefan
2016-06-01
We revisit the Schrieffer-Wolff transformation and present a path integral version of this important canonical transformation. The equivalence between the low-energy sector of the Anderson model in the so-called local moment regime and the spin-isotropic Kondo model is usually established via a canonical transformation performed on the Hamiltonian, followed by a projection. Here we present a path integral formulation of the Schrieffer-Wolff transformation which relates the functional integral form of the partition function of the Anderson model to that of its effective low-energy model. The resulting functional integral assumes the form of a spin path integral and includes a geometric phase factor, i.e. a Berry phase. Our approach stresses the underlying symmetries of the model and allows for a straightforward generalization of the transformation to more involved models. It thus not only sheds new light on a classic problem, it also offers a systematic route of obtaining effective low-energy models and higher order corrections. This is demonstrated by obtaining the effective low-energy model of a quantum dot attached to two ferromagnetic leads.
Directory of Open Access Journals (Sweden)
A. Tadeu
2012-01-01
Full Text Available The evaluation of the singular and hypersingular integrals that appear in three-dimensional boundary element formulations for heat diffusion, in the frequency domain, is presented in analytical form. This improves computational efficiency and accuracy. Numerical integrations using existing techniques based on standard Gaussian integration schemes that incorporate an enormous amount of sampling points are used to verify the solutions of singular integrals. For the hypersingular integrals the comparison is evaluated by making use of an analytical solution that is valid for circular domains, combined with a standard Gaussian integration scheme for the remaining boundary element domain. Closed form solutions for cylindrical inclusions (with null temperatures and null heat fluxes prescribed on the boundary are then derived and used to validate the three-dimensional boundary element formulations.
Volume Integral Theorem for Exotic Matter
Nandi, Kamal Kanti; Zhang, Yuan-Zhong; Kumar, K. B. Vijaya
2004-01-01
We answer an important question in general relativity about the volume integral theorem for exotic matter by suggesting an exact integral quantifier for matter violating Averaged Null Energy Condition (ANEC). It is checked against some well known static, spherically symmetric traversable wormhole solutions of general relativity with a sign reversed kinetic term minimally coupled scalar field. The improved quantifier is consistent with the principle that traversable wormholes can be supported ...
De Hoop, A.T.; Abubakar, A.; Habashy, T.M.
2009-01-01
The contrast-source stress-velocity integral-equation formulation of three-dimensional time-domain elastodynamic scattering problems is discussed. A novel feature of the formulation is a tensor partitioning of the relevant dynamic stress and the contrast source volume density of deformation rate. Th
The integrated Earth System Model Version 1: formulation and functionality
Energy Technology Data Exchange (ETDEWEB)
Collins, William D.; Craig, Anthony P.; Truesdale, John E.; Di Vittorio, Alan; Jones, Andrew D.; Bond-Lamberty, Benjamin; Calvin, Katherine V.; Edmonds, James A.; Kim, Son H.; Thomson, Allison M.; Patel, Pralit L.; Zhou, Yuyu; Mao, Jiafu; Shi, Xiaoying; Thornton, Peter E.; Chini, Louise M.; Hurtt, George C.
2015-07-23
The integrated Earth System Model (iESM) has been developed as a new tool for pro- jecting the joint human/climate system. The iESM is based upon coupling an Integrated Assessment Model (IAM) and an Earth System Model (ESM) into a common modeling in- frastructure. IAMs are the primary tool for describing the human–Earth system, including the sources of global greenhouse gases (GHGs) and short-lived species, land use and land cover change, and other resource-related drivers of anthropogenic climate change. ESMs are the primary scientific tools for examining the physical, chemical, and biogeochemical impacts of human-induced changes to the climate system. The iESM project integrates the economic and human dimension modeling of an IAM and a fully coupled ESM within a sin- gle simulation system while maintaining the separability of each model if needed. Both IAM and ESM codes are developed and used by large communities and have been extensively applied in recent national and international climate assessments. By introducing heretofore- omitted feedbacks between natural and societal drivers, we can improve scientific under- standing of the human–Earth system dynamics. Potential applications include studies of the interactions and feedbacks leading to the timing, scale, and geographic distribution of emissions trajectories and other human influences, corresponding climate effects, and the subsequent impacts of a changing climate on human and natural systems. This paper de- scribes the formulation, requirements, implementation, testing, and resulting functionality of the first version of the iESM released to the global climate community.
Hybrid Finite Element and Volume Integral Methods for Scattering Using Parametric Geometry
DEFF Research Database (Denmark)
Volakis, John L.; Sertel, Kubilay; Jørgensen, Erik
2004-01-01
n this paper we address several topics relating to the development and implementation of volume integral and hybrid finite element methods for electromagnetic modeling. Comparisons of volume integral equation formulations with the finite element-boundary integral method are given in terms of accu...... of vanishing divergence within the element but non-zero curl. In addition, a new domain decomposition is introduced for solving array problems involving several million degrees of freedom. Three orders of magnitude CPU reduction is demonstrated for such applications....
Engwirda, Darren; Kelley, Maxwell; Marshall, John
2017-08-01
Discretisation of the horizontal pressure gradient force in layered ocean models is a challenging task, with non-trivial interactions between the thermodynamics of the fluid and the geometry of the layers often leading to numerical difficulties. We present two new finite-volume schemes for the pressure gradient operator designed to address these issues. In each case, the horizontal acceleration is computed as an integration of the contact pressure force that acts along the perimeter of an associated momentum control-volume. A pair of new schemes are developed by exploring different control-volume geometries. Non-linearities in the underlying equation-of-state definitions and thermodynamic profiles are treated using a high-order accurate numerical integration framework, designed to preserve hydrostatic balance in a non-linear manner. Numerical experiments show that the new methods achieve high levels of consistency, maintaining hydrostatic and thermobaric equilibrium in the presence of strongly-sloping layer geometries, non-linear equations-of-state and non-uniform vertical stratification profiles. These results suggest that the new pressure gradient formulations may be appropriate for general circulation models that employ hybrid vertical coordinates and/or terrain-following representations.
Tanaka, Akiko; Furubayashi, Tomoyuki; Enomura, Yuki; Hori, Tomoki; Shimomura, Rina; Maeda, Chiaki; Kimura, Shunsuke; Inoue, Daisuke; Kusamori, Kosuke; Katsumi, Hidemasa; Sakane, Toshiyasu; Yamamoto, Akira
2017-01-01
The effect of changes in the mucosal fluid volume on the nasal drug absorption of powder formulations was evaluated using warfarin (WF), piroxicam (PXC), and norfloxacin (NFX) as model drugs. Lactose and sodium chloride (NaCl), which are water soluble and small-sized chemicals that increase osmotic pressure after dissolution, were used as excipients to change the mucosal fluid volume. The in vitro study using a Madin-Darby canine kidney (MDCK) cell monolayer indicated that lactose and NaCl, sprayed over the surface of air interface monolayers, increased the fluid volume on the monolayer surface and enhanced the transepithelial transport of the model drugs. The in vivo animal study indicated that the nasal absorption of PXC is enhanced by lactose and NaCl after nasal administration of the powder formulations. This is likely due to the enhanced dissolution of PXC on fluid-rich nasal mucosa and an increase in the effective surface area for drug permeation, which lead to better nasal absorption. However, both excipients failed to increase the nasal absorption of WF and NFX. To clarify the mechanism of the drug-dependent effect of lactose and NaCl, the nasal residence of the formulation was examined using FD70 as a non-absorbable marker. The nasal clearance of FD70 was enhanced by lactose and NaCl, leading to a decrease in the nasal drug absorption. Lactose and NaCl caused no damage to the nasal tissue. These results indicate that the addition of water-soluble excipients such as lactose to powder formulations can enhance the nasal absorption of highly permeable but poorly soluble drugs.
Gerini, G.; Visser, H.J.
1999-01-01
In this paper we present an efficient theoretical formulation for a full-wave analysis of phased Arrays conformal to cylindrical structures. The theory is based on an integral equation formulation and the Unit Cell Approach. Thanks to its generality and efficiency, this method represents a good
Modeling mitochondrial bioenergetics with integrated volume dynamics.
Directory of Open Access Journals (Sweden)
Jason N Bazil
2010-01-01
Full Text Available Mathematical models of mitochondrial bioenergetics provide powerful analytical tools to help interpret experimental data and facilitate experimental design for elucidating the supporting biochemical and physical processes. As a next step towards constructing a complete physiologically faithful mitochondrial bioenergetics model, a mathematical model was developed targeting the cardiac mitochondrial bioenergetic based upon previous efforts, and corroborated using both transient and steady state data. The model consists of several modified rate functions of mitochondrial bioenergetics, integrated calcium dynamics and a detailed description of the K(+-cycle and its effect on mitochondrial bioenergetics and matrix volume regulation. Model simulations were used to fit 42 adjustable parameters to four independent experimental data sets consisting of 32 data curves. During the model development, a certain network topology had to be in place and some assumptions about uncertain or unobserved experimental factors and conditions were explicitly constrained in order to faithfully reproduce all the data sets. These realizations are discussed, and their necessity helps contribute to the collective understanding of the mitochondrial bioenergetics.
Modeling mitochondrial bioenergetics with integrated volume dynamics.
Bazil, Jason N; Buzzard, Gregery T; Rundell, Ann E
2010-01-01
Mathematical models of mitochondrial bioenergetics provide powerful analytical tools to help interpret experimental data and facilitate experimental design for elucidating the supporting biochemical and physical processes. As a next step towards constructing a complete physiologically faithful mitochondrial bioenergetics model, a mathematical model was developed targeting the cardiac mitochondrial bioenergetic based upon previous efforts, and corroborated using both transient and steady state data. The model consists of several modified rate functions of mitochondrial bioenergetics, integrated calcium dynamics and a detailed description of the K(+)-cycle and its effect on mitochondrial bioenergetics and matrix volume regulation. Model simulations were used to fit 42 adjustable parameters to four independent experimental data sets consisting of 32 data curves. During the model development, a certain network topology had to be in place and some assumptions about uncertain or unobserved experimental factors and conditions were explicitly constrained in order to faithfully reproduce all the data sets. These realizations are discussed, and their necessity helps contribute to the collective understanding of the mitochondrial bioenergetics.
3D Finite Volume Modeling of ENDE Using Electromagnetic T-Formulation
Directory of Open Access Journals (Sweden)
Yue Li
2012-01-01
Full Text Available An improved method which can analyze the eddy current density in conductor materials using finite volume method is proposed on the basis of Maxwell equations and T-formulation. The algorithm is applied to solve 3D electromagnetic nondestructive evaluation (E’NDE benchmark problems. The computing code is applied to study an Inconel 600 work piece with holes or cracks. The impedance change due to the presence of the crack is evaluated and compared with the experimental data of benchmark problems No. 1 and No. 2. The results show a good agreement between both calculated and measured data.
Failure of the Volume Function in Granular Statistical Mechanics and an Alternative Formulation.
Blumenfeld, Raphael; Amitai, Shahar; Jordan, Joe F; Hihinashvili, Rebecca
2016-04-08
We first show that the currently accepted statistical mechanics for granular matter is flawed. The reason is that it is based on the volume function, which depends only on a minute fraction of all the structural degrees of freedom and is unaffected by most of the configurational microstates. Consequently, the commonly used partition function underestimates the entropy severely. We then propose a new formulation, replacing the volume function with a connectivity function that depends on all the structural degrees of freedom and accounts correctly for the entire entropy. We discuss the advantages of the new formalism and derive explicit results for two- and three-dimensional systems. We test the formalism by calculating the entropy of an experimental two-dimensional system, as a function of system size, and showing that it is an extensive variable.
An Integrated Methodology for Emulsified Formulated Product Design
DEFF Research Database (Denmark)
Mattei, Michele
and generated; and an algorithm for the model - based design of emulsified solvent mixtures has been developed. All these tools have b een im- plemented as a new template in the virtual Product - Process Design laboratory software. To illustrate the application of the proposed methodology, three case studies......The consumer oriented chemical based products are used every day by millions of people. They are structured products constituted of numerous chemicals, and many of them, especially household and personal care products, are emulsions where active ingredients, solvents, additives and surfactants...... models have been retrieved and organized in a model library; new property models have been developed for a set of thermo - physical properties of surfactants; a robust, system atic knowledge - base has been developed in relation to emulsified formulated products; chem- ical databases have been improved...
Formulating an Integrated Library Government Documents Collection Policy.
Hodge, Stanley P.; And Others
1989-01-01
Offers suggestions for developing a collection policy that promotes the integration of government documents into an academic library's overall collection management objectives. Steps described include selecting appropriate agencies, selecting appropriate levels of collection intensity, assigning intensity levels to agency materials, and adjusting…
Institute of Scientific and Technical Information of China (English)
马杭; 黄兴
2003-01-01
Based on the fact that the singular boundary integrals in the sense of Cauchy principal value can be represented approxi-mately by the mean values of two companion nearly singular boundary integrals, a vary general approach was developed in the paper.In the approach, the approximate formulation before discretization was constructed to cope with the difficulties encountered in the cor-ner treatment in the formulations of hypersingular boundary integral equations. This makes it possible to solve the hypersingular boundary integral equation numerically in a non-regularized form and in a local manner by using conforming C0 quadratic boundary ele-ments and standard Gaussian quadratures similar to those employed in the conventional displacement-BIE formulations. The approxi-mate formulation is very convenient to use because the corner information is comprised naturally in the representations of those ap-proximate integrals. Numerical examples in plane elasticity show that with the present approach, the compatible or better results can be achieved in comparison with those of the conventional BIE formulations.
Institute of Scientific and Technical Information of China (English)
MA Hang; XIA Li-wei; QIN Qing-hua
2008-01-01
A computational model is proposed for short-fiber reinforced materials with the eigenstrain formulation of the boundary integral equations(BIE)and solved with the newly developed boundary point method(BPM).The model is closely derived from the concept of the equivalent inclusion of Eshelby tensors.Eigenstrains are iteratively determined for each short.fiber embedded in the matrix with various properties via the Eshelby tensors,which can be readily obtained beforehand either through analytical or numerical means.As unknown variables appear only on the boundary of the solution domain,the solution scale of the inhomogeneity problem with the model is greatly reduced.This feature is considered significant because such a traditionally time-consuming problem with inhomogeneity can be solved most cost-effectively compared with existing numerical models of the FEM or the BEM.The numerical examples are presented to compute the overall elastic properties for various short-fiber reinforced composites over a representative volume element(RVE),showing the validity and the effectiveness of the proposed computational modal and the solution procedure.
Mimetic Theory for Cell-Centered Lagrangian Finite Volume Formulation on General Unstructured Grids
Energy Technology Data Exchange (ETDEWEB)
Sambasivan, Shiv Kumar [Los Alamos National Laboratory; Shashkov, Mikhail J. [Los Alamos National Laboratory; Burton, Donald E. [Los Alamos National Laboratory; Christon, Mark A. [Los Alamos National Laboratory
2012-07-19
A finite volume cell-centered Lagrangian scheme for solving large deformation problems is constructed based on the hypo-elastic model and using the mimetic theory. Rigorous analysis in the context of gas and solid dynamics, and arbitrary polygonal meshes, is presented to demonstrate the ability of cell-centered schemes in mimicking the continuum properties and principles at the discrete level. A new mimetic formulation based gradient evaluation technique and physics-based, frame independent and symmetry preserving slope limiters are proposed. Furthermore, a physically consistent dissipation model is employed which is both robust and inexpensive to implement. The cell-centered scheme along with these additional new features are applied to solve solids undergoing elasto-plastic deformation.
Time-Domain Volume Integral Equation for TM-Case Scattering from Nonlinear Penetrable Objects
Institute of Scientific and Technical Information of China (English)
WANG Jianguo; Eric Michielssen
2001-01-01
This paper presents the time-domainvolume integral equation (TDVIE) method to analyzescattering from nonlinear penetrable objects, whichare illuminated by the transverse magnetic (TM) in-cident pulse. The time-domain volume integral equa-tion is formulated in terms of two-dimensional (2D)Green's function, and solved by using the march-on-in time (MOT) technique. Some numerical results aregiven to validate this method, and comparisons aremade with the results obtained by using the finite-difference time-domain (FDTD) method.
A rotational integral formula for intrinsic volumes
DEFF Research Database (Denmark)
Jensen, Eva Bjørn Vedel; Rataj, J.
2008-01-01
passing through fixed points are related to the geometry of the sectioned object. In particular it is shown how certain weighting factors, appearing in the rotational integral formula, can be expressed in terms of hypergeometric functions. Close connections to geometric tomography will be pointed out...
Integrated safety management system verification: Volume 1
Energy Technology Data Exchange (ETDEWEB)
Christensen, R.F.
1998-08-12
Department of Energy (DOE) Policy (P) 450.4, Safety Management System Policy, commits to institutionalizing an Integrated Safety Management System (ISMS) throughout the DOE complex. The DOE Acquisition Regulations (DEAR 48 CFR 970) requires contractors to manage and perform work in accordance with a documented Integrated Safety Management System. The Manager, Richland Operations Office (RL), initiated a combined Phase 1 and Phase 2 Integrated Safety Management Verification review to confirm that PNNL had successfully submitted a description of their ISMS and had implemented ISMS within the laboratory facilities and processes. A combined review was directed by the Manager, RL, based upon the progress PNNL had made in the implementation of ISM. This report documents the results of the review conducted to verify: (1) that the PNNL integrated safety management system description and enabling documents and processes conform to the guidance provided by the Manager, RL; (2) that corporate policy is implemented by line managers; (3) that PNNL has provided tailored direction to the facility management; and (4) the Manager, RL, has documented processes that integrate their safety activities and oversight with those of PNNL. The general conduct of the review was consistent with the direction provided by the Under Secretary`s Draft Safety Management System Review and Approval Protocol. The purpose of this review was to provide the Manager, RL, with a recommendation to the adequacy of the ISMS description of the Pacific Northwest Laboratory based upon compliance with the requirements of 49 CFR 970.5204(-2 and -78); and, to provide an evaluation of the extent and maturity of ISMS implementation within the Laboratory. Further, this review was intended to provide a model for other DOE Laboratories. In an effort to reduce the time and travel costs associated with ISM verification the team agreed to conduct preliminary training and orientation electronically and by phone. These
Integrated safety management system verification: Volume 1
Energy Technology Data Exchange (ETDEWEB)
Christensen, R.F.
1998-08-12
Department of Energy (DOE) Policy (P) 450.4, Safety Management System Policy, commits to institutionalizing an Integrated Safety Management System (ISMS) throughout the DOE complex. The DOE Acquisition Regulations (DEAR 48 CFR 970) requires contractors to manage and perform work in accordance with a documented Integrated Safety Management System. The Manager, Richland Operations Office (RL), initiated a combined Phase 1 and Phase 2 Integrated Safety Management Verification review to confirm that PNNL had successfully submitted a description of their ISMS and had implemented ISMS within the laboratory facilities and processes. A combined review was directed by the Manager, RL, based upon the progress PNNL had made in the implementation of ISM. This report documents the results of the review conducted to verify: (1) that the PNNL integrated safety management system description and enabling documents and processes conform to the guidance provided by the Manager, RL; (2) that corporate policy is implemented by line managers; (3) that PNNL has provided tailored direction to the facility management; and (4) the Manager, RL, has documented processes that integrate their safety activities and oversight with those of PNNL. The general conduct of the review was consistent with the direction provided by the Under Secretary`s Draft Safety Management System Review and Approval Protocol. The purpose of this review was to provide the Manager, RL, with a recommendation to the adequacy of the ISMS description of the Pacific Northwest Laboratory based upon compliance with the requirements of 49 CFR 970.5204(-2 and -78); and, to provide an evaluation of the extent and maturity of ISMS implementation within the Laboratory. Further, this review was intended to provide a model for other DOE Laboratories. In an effort to reduce the time and travel costs associated with ISM verification the team agreed to conduct preliminary training and orientation electronically and by phone. These
Integrated safety management system verification: Volume 2
Energy Technology Data Exchange (ETDEWEB)
Christensen, R.F.
1998-08-10
Department of Energy (DOE) Policy (P) 450.4, Safety Management System Policy, commits to institutionalization of an Integrated Safety Management System (ISMS) throughout the DOE complex. The DOE Acquisition Regulations (DEAR, 48 CFR 970) requires contractors to manage and perform work in accordance with a documented Integrated Safety Management System (ISMS). Guidance and expectations have been provided to PNNL by incorporation into the operating contract (Contract DE-ACM-76FL0 1830) and by letter. The contract requires that the contractor submit a description of their ISMS for approval by DOE. PNNL submitted their proposed Safety Management System Description for approval on November 25,1997. RL tentatively approved acceptance of the description pursuant to a favorable recommendation from this review. The Integrated Safety Management System Verification is a review of the adequacy of the ISMS description in fulfilling the requirements of the DEAR and the DOE Policy. The purpose of this review is to provide the Richland Operations Office Manager with a recommendation for approval of the ISMS description of the Pacific Northwest Laboratory based upon compliance with the requirements of 49 CFR 970.5204(-2 and -78); and to verify the extent and maturity of ISMS implementation within the Laboratory. Further the review will provide a model for other DOE laboratories managed by the Office of Assistant Secretary for Energy Research.
Studies were conducted to examine the depositioin of microcapsules and the attractiveness of treated apple leaves for codling moth, Cydia pomonella (L.), following low volume concentrated sprays of a microencapsulated (MEC) sex pheromone formulation (CheckMate CM-F). Nearly 30% of leaves collected f...
Boundary regularized integral equation formulation of the Helmholtz equation in acoustics.
Sun, Qiang; Klaseboer, Evert; Khoo, Boo-Cheong; Chan, Derek Y C
2015-01-01
A boundary integral formulation for the solution of the Helmholtz equation is developed in which all traditional singular behaviour in the boundary integrals is removed analytically. The numerical precision of this approach is illustrated with calculation of the pressure field owing to radiating bodies in acoustic wave problems. This method facilitates the use of higher order surface elements to represent boundaries, resulting in a significant reduction in the problem size with improved precision. Problems with extreme geometric aspect ratios can also be handled without diminished precision. When combined with the CHIEF method, uniqueness of the solution of the exterior acoustic problem is assured without the need to solve hypersingular integrals.
Boundary regularized integral equation formulation of the Helmholtz equation in acoustics
Sun, Qiang; Klaseboer, Evert; Khoo, Boo-Cheong; Chan, Derek Y. C.
2015-01-01
A boundary integral formulation for the solution of the Helmholtz equation is developed in which all traditional singular behaviour in the boundary integrals is removed analytically. The numerical precision of this approach is illustrated with calculation of the pressure field owing to radiating bodies in acoustic wave problems. This method facilitates the use of higher order surface elements to represent boundaries, resulting in a significant reduction in the problem size with improved precision. Problems with extreme geometric aspect ratios can also be handled without diminished precision. When combined with the CHIEF method, uniqueness of the solution of the exterior acoustic problem is assured without the need to solve hypersingular integrals. PMID:26064591
Prigogine, Ilya
2002-01-01
Hamiltonian systems can be classified according Poincaré into integrable and non-integrable systems. On the other hand, our previous work introduced a formulation of dynamics based on the evolution of correlations. It is shown that for integrable systems this method is equivalent to the diagonalisation problem of the Hamiltonian for integrable systems but our method can be easily extended to non-integrable systems through analytic continuation. This leads to a description of unstable dressed excited states, as well as to excitations for interacting fields. The mechanism of the formation of dressed objects will be analysed in terms of two different time scales. The analogy with these dissipative structures will be emphasized. We may distinguish two levels in the formulation of laws of nature. The first is in terms of Hamiltonian dynamics, the second, necessary for classes of non-integrable systems, The first is in terms of Hamiltonian dynamics, the second, necessary for classes of non-integrable systems, aris...
DEFF Research Database (Denmark)
Kim, Oleksiy S.; Meincke, Peter; Breinbjerg, Olav
2007-01-01
is applied to transform the VSIE into a system of linear equations. The higher-order MoM provides significant reduction in the number of unknowns in comparison with standard MoM formulations using low-order basis functions, such as RWG functions. Due to the orthogonal nature of the higher-order Legendre......The problem of electromagnetic scattering by composite metallic and dielectric objects is solved using the coupled volume-surface integral equation (VSIE). The method of moments (MoM) based on higher-order hierarchical Legendre basis functions and higher-order curvilinear geometrical elements...
Integrating Girl Child Issues into Population Education. Volume 1.
United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand).
One of the most important vehicles for promoting the concerns of the "girl child" and the elimination of gender bias is through education. Programs in population education are being funded all over the world and are a suitable and effective medium for integrating messages on the girl child. This two-volume publication deals with population…
Gratton, Steven
2010-01-01
In this paper we present a path integral formulation of stochastic inflation, in which volume weighting can easily be implemented. With an in-depth study of inflation in a quartic potential, we investigate how the inflaton evolves and how inflation typically ends both with and without volume weighting. Perhaps unexpectedly, complex histories sometimes emerge with volume weighting. The reward for this excursion into the complex plane is an insight into how volume-weighted inflation both loses memory of initial conditions and ends via slow-roll. The slow-roll end of inflation mitigates certain "Youngness Paradox"-type criticisms of the volume-weighted paradigm. Thus it is perhaps time to rehabilitate proper time volume weighting as a viable measure for answering at least some interesting cosmological questions.
Local and Global Illumination in the Volume Rendering Integral
Energy Technology Data Exchange (ETDEWEB)
Max, N; Chen, M
2005-10-21
This article is intended as an update of the major survey by Max [1] on optical models for direct volume rendering. It provides a brief overview of the subject scope covered by [1], and brings recent developments, such as new shadow algorithms and refraction rendering, into the perspective. In particular, we examine three fundamentals aspects of direct volume rendering, namely the volume rendering integral, local illumination models and global illumination models, in a wavelength-independent manner. We review the developments on spectral volume rendering, in which visible light are considered as a form of electromagnetic radiation, optical models are implemented in conjunction with representations of spectral power distribution. This survey can provide a basis for, and encourage, new efforts for developing and using complex illumination models to achieve better realism and perception through optical correctness.
Daniele, C. J.; Lorenzo, C. F.
1979-01-01
Lumped volume dynamic equations are derived using an energy-state formulation. This technique requires that kinetic and potential energy state functions be written for the physical system being investigated. To account for losses in the system, a Rayleigh dissipation function is also formed. Using these functions, a Lagrangian is formed and using Lagrange's equation, the equations of motion for the system are derived. The results of the application of this technique to a lumped volume are used to derive a model for the free-piston Stirling engine. The model was simplified and programmed on an analog computer. Results are given comparing the model response with experimental data.
On the Structure of QFT in the Particle Picture of the Path Integral Formulation
Jackson, D M; Morales, A
2008-01-01
In quantum field theory the path integral is usually formulated in the wave picture, i.e., as a sum over field evolutions. This path integral is difficult to define rigorously because of analytic problems whose resolution may ultimately require knowledge of non-perturbative or even Planck scale physics. Alternatively, QFT can be formulated directly in the particle picture, namely as a sum over all multi-particle paths, i.e., over Feynman graphs. This path integral is well-defined, as a map between rings of formal power series. This suggests a program for determining which structures of QFT are provable for this path integral and thus are combinatorial in nature, and which structures are actually sensitive to analytic issues. For a start, we show that the fact that the Legendre transform of the sum of connected graphs yields the effective action is indeed combinatorial in nature and is thus independent of analytic assumptions. Our proof also leads to new methods for the efficient decomposition of Feynman graph...
Bagci, Hakan
2010-08-01
A well-conditioned coupled set of surface (S) and volume (V) electric field integral equations (S-EFIE and V-EFIE) for analyzing wave interactions with densely discretized composite structures is presented. Whereas the V-EFIE operator is well-posed even when applied to densely discretized volumes, a classically formulated S-EFIE operator is ill-posed when applied to densely discretized surfaces. This renders the discretized coupled S-EFIE and V-EFIE system ill-conditioned, and its iterative solution inefficient or even impossible. The proposed scheme regularizes the coupled set of S-EFIE and V-EFIE using a Calderón multiplicative preconditioner (CMP)-based technique. The resulting scheme enables the efficient analysis of electromagnetic interactions with composite structures containing fine/subwavelength geometric features. Numerical examples demonstrate the efficiency of the proposed scheme. © 2006 IEEE.
Gomez-Sousa, Hipolito; Martinez-Lorenzo, Jose Angel
2015-01-01
The electromagnetic behavior of plasmonic structures can be predicted after discretizing and solving a linear system of equations, derived from a continuous surface integral equation (SIE) and the appropriate boundary conditions, using a method of moments (MoM) methodology. In realistic large-scale optical problems, a direct inversion of the SIE-MoM matrix cannot be performed due to its large size, and an iterative solver must be used instead. This paper investigates the performance of four iterative solvers (GMRES, TFQMR, CGS, and BICGSTAB) for five different SIE-MoM formulations (PMCHWT, JMCFIE, CTF, CNF, and MNMF). Moreover, under this plasmonic context, a set of suggested guidelines are provided to choose a suitable SIE formulation and iterative solver depending on the desired simulation error and available runtime resources.
Community biomass handbook volume 4: enterprise development for integrated wood manufacturing
Eini Lowell; D.R. Becker; D. Smith; M. Kauffman; D. Bihn
2017-01-01
The Community Biomass Handbook Volume 4: Enterprise Development for Integrated Wood Manufacturing is a guide for creating sustainable business enterprises using small diameter logs and biomass. This fourth volume is a companion to three Community Biomass Handbook volumes: Volume 1: Thermal Wood Energy; Volume 2: Alaska, Where Woody Biomass Can Work; and Volume 3: How...
Bagci, Hakan
2010-05-01
A hierarchically regularized coupled set of time-domain surface and volume electric field integral-equations (TD-S-EFIE and TD-V-EFIE) for analyzing electromagnetic wave interactions with electrically small and geometrically intricate composite structures comprising perfect electrically conducting surfaces and finite dielectric volumes is presented. A classically formulated coupled set of TD-S- and V-EFIEs is shown to be ill-conditioned at low frequencies owing to the hypersingular nature of the TD-S-EFIE. To eliminate low-frequency breakdown in marching-on-in-time solvers for these coupled equations, a hierarchical regularizer leveraging generalized RaoWiltonGlisson functions is applied to the TD-S-EFIE; no regularization is applied to the TD-V-EFIE as it is protected from low-frequency breakdown by an identity term. The resulting hierarchically regularized hybrid TD-S- and V-EFIE solver is applicable to the analysis of wave interactions with electrically small and densely meshed structures of arbitrary topology. The accuracy, efficiency, and applicability of the proposed solver are demonstrated by analyzing crosstalk in a six-port transmission line, radiation from a miniature radio-frequency identification antenna, and, plane-wave coupling onto a partially-shielded and fully loaded two-layer computer board. © 2006 IEEE.
Dault, Daniel Lawrence
The moment method is the predominant approach for the solution of electromagnetic boundary integral equations. Traditional moment method discretizations rely on the projection of solution currents onto basis sets that must satisfy strict continuity properties to model physical currents. The choice of basis sets is further restricted by the tight coupling of traditional functional descriptions to the underlying geometrical approximation of the scattering or radiating body. As a result, the choice of approximation function spaces and geometry discretizations for a given boundary integral equation is significantly limited. A quasi-meshless partition of unity based method called the Generalized Method of Moments (GMM) was recently introduced to overcome some of these limitations. The GMM partition of unity scheme affords automatic continuity of solution currents, and therefore permits the use of a much wider range of basis functions than traditional moment methods. However, prior to the work in this thesis, GMM was limited in practical applicability because it was only formulated for a few geometry types, could not be accurately applied to arbitrary scatterers, e.g. those with mixtures of geometrical features, and was not amenable to traditional acceleration methodologies that would permit its application to electrically large problems. The primary contribution of this thesis is to introduce several new GMM formulations that significantly expand the capabilities of the method to make it a practical, broadly applicable approach for solving boundary integral equations and overcoming the limitations inherent in traditional moment method discretizations. Additionally, several of the topics covered address continuing open problems in electromagnetic boundary integral equations with applicability beyond GMM. The work comprises five broad contributions. The first is a new GMM formulation capable of mixing both GMM-type basis sets and traditional basis sets in the same
DEFF Research Database (Denmark)
Kim, Oleksiy S.; Breinbjerg, Olav
2008-01-01
Two volume integral equation formulations for modelling magneto-dielectric objects are compared in terms of accuracy and computational efficiency. The first is the combined-field integral equation (CFVIE), in which the unknown quantities are both the electric and magnetic fields, while the second...... is the electric-field integral equation (EFVIE) with a single unknown quantity - the electric field. A resonant double-negative metamaterial spherical shell is analysed as an example....
DEFF Research Database (Denmark)
Kim, Oleksiy S.; Breinbjerg, Olav
2008-01-01
Two volume integral equation formulations for modelling magneto-dielectric objects are compared in terms of accuracy and computational efficiency. The first is the combined-field integral equation (CFVIE), in which the unknown quantities are both the electric and magnetic fields, while the second...... is the electric-field integral equation (EFVIE) with a single unknown quantity - the electric field. A resonant double-negative metamaterial spherical shell is analysed as an example....
An, Hongli; Fan, Engui; Zhu, Haixing
2015-01-01
The 2+1-dimensional compressible Euler equations are investigated here. A power-type elliptic vortex ansatz is introduced and thereby reduction obtains to an eight-dimensional nonlinear dynamical system. The latter is shown to have an underlying integral Ermakov-Ray-Reid structure of Hamiltonian type. It is of interest to notice that such an integrable Ermakov structure exists not only in the density representations but also in the velocity components. A class of typical elliptical vortex solutions termed pulsrodons corresponding to warm-core eddy theory is isolated and its behavior is simulated. In addition, a Lax pair formulation is constructed and the connection with stationary nonlinear cubic Schrödinger equations is established.
An integral equation formulation for rigid bodies in Stokes flow in three dimensions
Corona, Eduardo; Greengard, Leslie; Rachh, Manas; Veerapaneni, Shravan
2017-03-01
We present a new derivation of a boundary integral equation (BIE) for simulating the three-dimensional dynamics of arbitrarily-shaped rigid particles of genus zero immersed in a Stokes fluid, on which are prescribed forces and torques. Our method is based on a single-layer representation and leads to a simple second-kind integral equation. It avoids the use of auxiliary sources within each particle that play a role in some classical formulations. We use a spectrally accurate quadrature scheme to evaluate the corresponding layer potentials, so that only a small number of spatial discretization points per particle are required. The resulting discrete sums are computed in O (n) time, where n denotes the number of particles, using the fast multipole method (FMM). The particle positions and orientations are updated by a high-order time-stepping scheme. We illustrate the accuracy, conditioning and scaling of our solvers with several numerical examples.
Ross, David A; Arbuckle, Melissa R; Travis, Michael J; Dwyer, Jennifer B; van Schalkwyk, Gerrit I; Ressler, Kerry J
2017-04-01
Posttraumatic stress disorder (PTSD) is a common psychiatric illness, increasingly in the public spotlight in the United States due its prevalence in the soldiers returning from combat in Iraq and Afghanistan. This educational review presents a contemporary approach for how to incorporate a modern neuroscience perspective into an integrative case formulation. The article is organized around key neuroscience "themes" most relevant for PTSD. Within each theme, the article highlights how seemingly diverse biological, psychological, and social perspectives all intersect with our current understanding of neuroscience. Any contemporary neuroscience formulation of PTSD should include an understanding of fear conditioning, dysregulated circuits, memory reconsolidation, epigenetics, and genetic factors. Fear conditioning and other elements of basic learning theory offer a framework for understanding how traumatic events can lead to a range of behaviors associated with PTSD. A circuit dysregulation framework focuses more broadly on aberrant network connectivity, including between the prefrontal cortex and limbic structures. In the process of memory reconsolidation, it is now clear that every time a memory is reactivated it becomes momentarily labile-with implications for the genesis, maintenance, and treatment of PTSD. Epigenetic changes secondary to various experiences, especially early in life, can have long-term effects, including on the regulation of the hypothalamic-pituitary-adrenal axis, thereby affecting an individual's ability to regulate the stress response. Genetic factors are surprisingly relevant: PTSD has been shown to be highly heritable despite being definitionally linked to specific experiences. The relevance of each of these themes to current clinical practice and its potential to transform future care are discussed. Together, these perspectives contribute to an integrative, neuroscience-informed approach to case formulation and treatment planning. This may
Topological Landau-Ginzburg formulation and integrable structure of 2d string theory
Hanany, A; Plesser, M R
1994-01-01
We construct a topological Landau-Ginzburg formulation of the two-dimensional string at the self-dual radius. The model is an analytic continuation of the $A_{k+1}$ minimal model to $k=-3$. We compute the superpotential and calculate tachyon correlators in the Landau-Ginzburg framework. The results are in complete agreement with matrix model calculations. We identify the momentum one tachyon as the puncture operator, non-negative momentum tachyons as primary fields, and negative momentum ones as descendants. The model thus has an infinite number of primary fields, and the topological metric vanishes on the small phase space when restricted to these. We find a parity invariant multi-contact algebra with irreducible contact terms of arbitrarily large number of fields. The formulation of this Landau-Ginzburg description in terms of period integral coincides with the genus zero $W_{1+\\infty}$ identities of two-dimensional string theory. We study the underlying Toda lattice integrable hierarchy in the Lax formulat...
Energy Technology Data Exchange (ETDEWEB)
Corcelli, S.A.; Kress, J.D.; Pratt, L.R.
1995-08-07
This paper develops and characterizes mixed direct-iterative methods for boundary integral formulations of continuum dielectric solvation models. We give an example, the Ca{sup ++}{hor_ellipsis}Cl{sup {minus}} pair potential of mean force in aqueous solution, for which a direct solution at thermal accuracy is difficult and, thus for which mixed direct-iterative methods seem necessary to obtain the required high resolution. For the simplest such formulations, Gauss-Seidel iteration diverges in rare cases. This difficulty is analyzed by obtaining the eigenvalues and the spectral radius of the non-symmetric iteration matrix. This establishes that those divergences are due to inaccuracies of the asymptotic approximations used in evaluation of the matrix elements corresponding to accidental close encounters of boundary elements on different atomic spheres. The spectral radii are then greater than one for those diverging cases. This problem is cured by checking for boundary element pairs closer than the typical spatial extent of the boundary elements and for those cases performing an ``in-line`` Monte Carlo integration to evaluate the required matrix elements. These difficulties are not expected and have not been observed for the thoroughly coarsened equations obtained when only a direct solution is sought. Finally, we give an example application of hybrid quantum-classical methods to deprotonation of orthosilicic acid in water.
Hijazzi, Norshamirra; Thiruchelvam, Sivadass; Sabri Muda, Rahsidi; Nasharuddin Mustapha, Kamal; Che Muda, Zakaria; Ghazali, Azrul; Kamal Kadir, Ahmad; Hakimie, Hazlinda; Sahari, Khairul Salleh Mohamed; Hasini, Hasril; Mohd Sidek, Lariyah; Itam, Zarina; Fadhli Mohamad, Mohd; Razad, Azwin Zailti Abdul
2016-03-01
Dams, however significant their contributions are to the society, are not immune to failures and diminishing lifespan not unlike other structural elements in our infrastructure. Despite continuing efforts on design, construction, operation, and maintenance of dams to improve the safety of the dams, the possibility of unforeseen events of dam failures is still possible. Seeing that dams are usually integrated into close approximities with the community, dam failures may consequent in tremendous loss of lives and properties. The aims of formulation of Integrated Community Based Disaster Management (ICBDM) is to simulate evacuation modelling and emergency planning in order to minimize loss of life and property damages in the event of a dam-related disaster. To achieve the aim above, five main pillars have been identified for the formulation of ICBDM. A series of well-defined program inclusive of hydrological 2-D modelling, life safety modelling, community based EWS and CBTAP will be conducted. Finally, multiple parties’ engagement is to be carried out in the form of table top exercise to measure the readiness of emergency plans and response capabilities of key players during the state of a crisis.
Verification and validation guidelines for high integrity systems. Volume 1
Energy Technology Data Exchange (ETDEWEB)
Hecht, H.; Hecht, M.; Dinsmore, G.; Hecht, S.; Tang, D. [SoHaR, Inc., Beverly Hills, CA (United States)
1995-03-01
High integrity systems include all protective (safety and mitigation) systems for nuclear power plants, and also systems for which comparable reliability requirements exist in other fields, such as in the process industries, in air traffic control, and in patient monitoring and other medical systems. Verification aims at determining that each stage in the software development completely and correctly implements requirements that were established in a preceding phase, while validation determines that the overall performance of a computer system completely and correctly meets system requirements. Volume I of the report reviews existing classifications for high integrity systems and for the types of errors that may be encountered, and makes recommendations for verification and validation procedures, based on assumptions about the environment in which these procedures will be conducted. The final chapter of Volume I deals with a framework for standards in this field. Volume II contains appendices dealing with specific methodologies for system classification, for dependability evaluation, and for two software tools that can automate otherwise very labor intensive verification and validation activities.
Correct Path-Integral Formulation of Quantum Thermal Field Theory in Coherent State Representation
Institute of Scientific and Technical Information of China (English)
SU Jun-Chen; ZHENG Fu-Hou
2005-01-01
The path-integral quantization of thermal scalar, vector, and spinor fields is performed newly in the coherent-state representation. In doing this, we choose the thermal electrodynamics and ψ4 theory as examples. By this quantization, correct expressions of the partition functions and the generating functionals for the quantum thermal electrodynamics and ψ4 theory are obtained in the coherent-state representation. These expressions allow us to perform analytical calculations of the partition functions and generating functionals and therefore are useful in practical applications. Especially, the perturbative expansions of the generating functionals are derived specifically by virtue of the stationary-phase method. The generating functionals formulated in the position space are re-derived from the ones given in the coherent-state representation.
PERTURBATION FINITE VOLUME METHOD FOR CONVECTIVE-DIFFUSION INTEGRAL EQUATION
Institute of Scientific and Technical Information of China (English)
GAO Zhi; YANG Guowei
2004-01-01
A perturbation finite volume (PFV) method for the convective-diffusion integral equation is developed in this paper. The PFV scheme is an upwind and mixed scheme using any higher-order interpolation and second-order integration approximations, with the least nodes similar to the standard three-point schemes, that is, the number of the nodes needed is equal to unity plus the face-number of the control volume. For instance, in the two-dimensional (2-D) case, only four nodes for the triangle grids and five nodes for the Cartesian grids are utilized, respectively. The PFV scheme is applied on a number of 1-D linear and nonlinear problems, 2-D and 3-D flow model equations. Comparing with other standard three-point schemes, the PFV scheme has much smaller numerical diffusion than the first-order upwind scheme (UDS). Its numerical accuracies are also higher than the second-order central scheme (CDS), the power-law scheme (PLS) and QUICK scheme.
Diffraction of Elastic Waves in Fluid-Layered Solid Interfaces by an Integral Formulation
Directory of Open Access Journals (Sweden)
J. E. Basaldúa-Sánchez
2013-01-01
Full Text Available In the present communication, scattering of elastic waves in fluid-layered solid interfaces is studied. The indirect boundary element method is used to deal with this wave propagation phenomenon in 2D fluid-layered solid models. The source is represented by Hankel’s function of second kind and this is always applied in the fluid. Our method is an approximate boundary integral technique which is based upon an integral representation for scattered elastic waves using single-layer boundary sources. This approach is typically called indirect because the sources’ strengths are calculated as an intermediate step. In addition, this formulation is regarded as a realization of Huygens’ principle. The results are presented in frequency and time domains. Various aspects related to the different wave types that emerge from this kind of problems are emphasized. A near interface pulse generates changes in the pressure field and can be registered by receivers located in the fluid. In order to show the accuracy of our method, we validated the results with those obtained by the discrete wave number applied to a fluid-solid interface joining two half-spaces, one fluid and the other an elastic solid.
Multiphase flow through porous media: an adaptive control volume finite element formulation
Mostaghimi, P.; Tollit, B.; Gorman, G.; Neethling, S.; Pain, C.
2012-12-01
Accurate modeling of multiphase flow in porous media is of great importance in a wide range of applications in science and engineering. We have developed a numerical scheme which employs an implicit pressure explicit saturation (IMPES) algorithm for the temporal discretization of the governing equations. The saturation equation is spatially discretized using a node centered control volume method on an unstructured finite element mesh. The face values are determined through an upwind scheme. The pressure equation is spatially discretized using a continuous control volume finite element method (CV-FEM) to achieve consistency with the discrete saturation equation. The numerical simulation is implemented in Fluidity, an open source and general purpose fluid simulator capable of solving a number of different governing equations for fluid flow and accompanying field equations on arbitrary unstructured meshes. The model is verified against the Buckley-Leverett problem where a quasi-analytical solution is available. We discuss the accuracy and the order of convergence of the scheme. We demonstrate the scheme for modeling multiphase flow in a synthetic heterogeneous porous medium along with the use of anisotropic mesh adaptivity to control local solution errors and increase computational efficiency. The adaptive method is also used to simulate two-phase flow in heap leaching, an industrial mining process, where the flow of the leaching solution is gravitationally dominated. Finally we describe the extension of the developed numerical scheme for simulation of flow in multiscale fractured porous media and its capability to model the multiscale characterization of flow in full scale.
Chaynikov, S.; Porta, G.; Riva, M.; Guadagnini, A.
2012-04-01
We focus on a theoretical analysis of nonreactive solute transport in porous media through the volume averaging technique. Darcy-scale transport models based on continuum formulations typically include large scale dispersive processes which are embedded in a pore-scale advection diffusion equation through a Fickian analogy. This formulation has been extensively questioned in the literature due to its inability to depict observed solute breakthrough curves in diverse settings, ranging from the laboratory to the field scales. The heterogeneity of the pore-scale velocity field is one of the key sources of uncertainties giving rise to anomalous (non-Fickian) dispersion in macro-scale porous systems. Some of the models which are employed to interpret observed non-Fickian solute behavior make use of a continuum formulation of the porous system which assumes a two-region description and includes a bimodal velocity distribution. A first class of these models comprises the so-called ''mobile-immobile'' conceptualization, where convective and dispersive transport mechanisms are considered to dominate within a high velocity region (mobile zone), while convective effects are neglected in a low velocity region (immobile zone). The mass exchange between these two regions is assumed to be controlled by a diffusive process and is macroscopically described by a first-order kinetic. An extension of these ideas is the two equation ''mobile-mobile'' model, where both transport mechanisms are taken into account in each region and a first-order mass exchange between regions is employed. Here, we provide an analytical derivation of two region "mobile-mobile" meso-scale models through a rigorous upscaling of the pore-scale advection diffusion equation. Among the available upscaling methodologies, we employ the Volume Averaging technique. In this approach, the heterogeneous porous medium is supposed to be pseudo-periodic, and can be represented through a (spatially) periodic unit cell
Fort Irwin Integrated Resource Assessment. Volume 2, Baseline detail
Energy Technology Data Exchange (ETDEWEB)
Richman, E.E.; Keller, J.M.; Dittmer, A.L.; Hadley, D.L.
1994-01-01
This report documents the assessment of baseline energy use at Fort Irwin, a US Army Forces Command facility near Barstow, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Army Forces Command (FORSCOM) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Irwin. This is part of a model program that PNL has designed to support energy-use decisions in the federal sector. This program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Fort Irwin. This analysis examines the characteristics of electric, propane gas, and vehicle fuel use for a typical operating year. It records energy-use intensities for the facilities at Fort Irwin by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A complete energy consumption reconciliation is presented that accounts for all energy use among buildings, utilities, and applicable losses.
Integrated Optofluidic Chip for Low-Volume Fluid Viscosity Measurement
Directory of Open Access Journals (Sweden)
Tie Yang
2017-02-01
Full Text Available In the present work, an integrated optofluidic chip for fluid viscosity measurements in the range from 1 mPa·s to 100 mPa·s is proposed. The device allows the use of small sample volumes (<1 µL and the measurement of viscosity as a function of temperature. Thanks to the precise control of the force exerted on dielectric spheres by optical beams, the viscosity of fluids is assessed by comparing the experimentally observed movement of dielectric beads produced by the optical forces with that expected by numerical calculations. The chip and the developed technique are validated by analyzing several fluids, such as Milli-Q water, ethanol and water–glycerol mixtures. The results show a good agreement between the experimental values and those reported in the literature. The extremely reduced volume of the sample required and the high flexibility of this technique make it a good candidate for measuring a wide range of viscosity values as well as for the analysis of nonlinear viscosity in complex fluids.
Fort Stewart integrated resource assessment. Volume 2, Baseline detail
Energy Technology Data Exchange (ETDEWEB)
Keller, J.M.; Sullivan, G.P.; Wahlstrom, R.R.; Larson, L.L.
1993-08-01
This report documents the assessment of baseline energy use at Fort Stewart, a US Army Forces Command facility located near Savannah, Georgia. This is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Army Forces Command (FORSCOM) tasked Pacific Northwest Laboratory (PNL) to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Stewart. PNL, in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), has designed a model program applicable to the federal sector for this purpose. The model program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Fort Stewart. The analysis examines the characteristics of electric, natural gas, oil, propane, and wood chip use for fiscal year (FY) 1990. The results include energy-use intensities for the facilities at Fort Stewart by building type, fuel type, and energy end use. A complete energy consumption reconciliation is presented that accounts for the distribution of all major energy uses and losses among buildings, utilities, and central systems.
Stenroos, Matti
2016-11-01
Boundary element methods (BEM) are used for forward computation of bioelectromagnetic fields in multi-compartment volume conductor models. Most BEM approaches assume that each compartment is in contact with at most one external compartment. In this work, I present a general surface integral equation and BEM discretization that remove this limitation and allow BEM modeling of general piecewise-homogeneous medium. The new integral equation allows positioning of field points at junctioned boundary of more than two compartments, enabling the use of linear collocation BEM in such a complex geometry. A modular BEM implementation is presented for linear collocation and Galerkin approaches, starting from the standard formulation. The approach and resulting solver are verified in four ways, including comparisons of volume and surface potentials to those obtained using the finite element method (FEM), and the effect of a hole in skull on electroencephalographic scalp potentials is demonstrated.
Holle, Daniela; Halek, Margareta; Holle, Bernhard; Pinkert, Christiane
2017-12-01
Individualized formulation-led interventions offer a promising approach for analyzing and managing challenging behaviors in people with dementia. Little is known about which individualized formulation-led interventions exist and what effects these interventions have on people with dementia and their caregivers. Therefore, the review aims to describe and examine existing interventions and to review their evidence. An integrative review of individualized formulation-led interventions for managing challenging behavior in people with dementia was conducted. PUBMED, PsycINFO [EBSCO] and CINAHL [EBSCO] databases were searched between February and April 2014 using key terms related to dementia, challenging behavior and individualized formulation- led interventions. The literature search was limited to German and English publications published from 1995. No limitations were placed on the type of paper, type of study design and stage of disease or setting. 37 relevant papers that met the inclusion criteria were included in this review. The literature review provided 14 different individualized formulation-led interventions. The effects on people with dementia were diverse, as only half of the studies showed a significant reduction in behaviors compared with the control group. Family caregivers felt less upset about the challenging behavior and more confident in their ability to manage the behavior. There is a clear need for further research on individualized formulation-led interventions. The results of this review have the potential for developing interventions and for designing methodological robust evaluation studies that take into account the effectiveness of individualized formulation-led interventions on patient and caregiver outcomes.
Integrating model of the Project Independence Evaluation System. Volume 1. Executive summary
Energy Technology Data Exchange (ETDEWEB)
Shaw, M.L.; Hutzler, M.J.
1979-04-01
This report is Volume I of a six-volume series documenting the Integrating Model of the Project Independence Evaluation System (PIES) as it existed on January 1, 1978. It offers a review of entire PIES system, including the basic components of the Integrating Model, which are described in detail in Volume IV of this series. In particular, this volume addresses the problem that PIES solves and the major features and applications of PIES.
DEFF Research Database (Denmark)
Arsalis, Alexandros; Nielsen, Mads Pagh; Kær, Søren Knudsen
2013-01-01
A 1 kWe micro combined heat and power (CHP) system based on high temperature proton exchange membrane fuel cell (PEMFC) technology is modeled and optimized by formulation and application of a process integration methodology. The system can provide heat and electricity for a singlefamily household...
Field, J. H.
2011-01-01
It is shown how the time-dependent Schrodinger equation may be simply derived from the dynamical postulate of Feynman's path integral formulation of quantum mechanics and the Hamilton-Jacobi equation of classical mechanics. Schrodinger's own published derivations of quantum wave equations, the first of which was also based on the Hamilton-Jacobi…
Field, J. H.
2011-01-01
It is shown how the time-dependent Schrodinger equation may be simply derived from the dynamical postulate of Feynman's path integral formulation of quantum mechanics and the Hamilton-Jacobi equation of classical mechanics. Schrodinger's own published derivations of quantum wave equations, the first of which was also based on the Hamilton-Jacobi…
TIME-DOMAIN VOLUME INTEGRAL EQUATION FOR TRANSIENT SCATTERING FROM INHOMOGENEOUS OBJECTS-2D TM CASE
Institute of Scientific and Technical Information of China (English)
Wang Jianguo; Fan Ruyu
2001-01-01
This letter proposes a time-domain volume integral equation based method for analyzing the transient scattering from a 2D inhomogeneous cylinder by involking the volume equivalence principle for the transverse magnetic case. This integral equation is solved by using an MOT scheme. Numerical results obtained using this method agree very well with those obtained using the FDTD method.
TIME-DOMAIN VOLUME INTEGRAL EQUATION FOR TRANSIENT SCATTERING FROM INHOMOGENEOUS OBJECTS-2D TE CASE
Institute of Scientific and Technical Information of China (English)
Wang Jianguo; Fan Ruyu
2001-01-01
This letter proposes a time-domain volume integral equation based method for analyzing the transient scattering from a 2D inhomogeneous cylinder by involking the volume equivalence principle for the transverse electric case. This integral equation is solved by using an MOT scheme. Numerical results obtained using this method agree very well with those obtained using the FDTD method.
Institute of Scientific and Technical Information of China (English)
陈宜亨; 马浩
1997-01-01
The explicit formulation of the J2-integral in anisotropic bodies and its application in microcrack shielding problems are discussed. With analytical treatments and numerical examinations, it is proved that there is a redistribution law for the remote J-integral in a discrete model of microcrack shielding problems, i.e. the projected conservation law of the Jk-vector. In this law, the J2-integral which was disregarded by Herrmann (1981) is proved to be of the same significance as the J1-integral. It is also concluded that the two energy dissipative processes due to the mi crocrack damage, i. e. the reduction in the effective moduli and the release of residual stresses, can be described by using the dissipation of the remote J-integral spreading across the microcrack damage zone.
Stenroos, Matti
2016-01-01
Boundary element methods (BEM) are used for forward computation of bioelectromagnetic fields in multi-compartment volume conductor models. Most BEM approaches assume that each compartment is in contact with at most one external compartment. In this work, I present a general surface integral equation and BEM discretization that remove this limitation and allow BEM modeling of general piecewise-homogeneous medium. The new integral equation allows positioning of field points at junctioned boundary of more than two compartments, enabling the use of linear collocation BEM in such a complex geometry. A modular BEM implementation is presented for linear collocation and Galerkin approaches, starting from standard formulation. The approach and resulting solver are verified in three ways, including comparison to finite element method (FEM). In a two-compartment split-sphere model with two spaced monopoles, the results obtained with high-resolution FEM and the BEMs were almost identical (relative difference < 0.003).
Pinckney, John
2010-01-01
With the advent of high speed computing Monte Carlo ray tracing techniques has become the preferred method for evaluating spacecraft orbital heats. Monte Carlo has its greatest advantage where there are many interacting surfaces. However Monte Carlo programs are specialized programs that suffer from some inaccuracy, long calculation times and high purchase cost. A general orbital heating integral is presented here that is accurate, fast and runs on MathCad, a generally available engineering mathematics program. The integral is easy to read, understand and alter. The integral can be applied to unshaded primitive surfaces at any orientation. The method is limited to direct heating calculations. This integral formulation can be used for quick orbit evaluations and spot checking Monte Carlo results.
Energy Technology Data Exchange (ETDEWEB)
Spence, R.D.; McDaniel, E.W. [Oak Ridge National Lab., TN (United States); Anderson, C.M.; Lokken, R.O.; Piepel, G.F. [Pacific Northwest Lab., Richland, WA (United States)
1993-09-01
Twenty potential ingredients were identified for use in developing a 106-AN grout formulation, and 18 were subsequently obtained and tested. Four ingredients-Type II-LA (moderate heat of hydration) Portland cement, Class F fly ash, attapulgite 150 drilling clay, and ground air-cooled blast-furnace slag (GABFS) were selected for developing the 106-AN grout formulations. A mixture experiment was designed and conducted around the following formulation: 2.5 lb of cement per gallon, 1.2 lb of fly ash per gallon, 0.8 lb of attapulgite per gallon, and 3.5 lb of GABFS per gallon. Reduced empirical models were generated from the results of the mixture experiment. These models were used to recommend several grout formulations for 106-AN. Westinghouse Hanford Company selected one of these formulations to be verified for use with 106-AN and a backup formulation in case problems arise with the first choice.
Aminayi, Payam
This study supports the development, characterization and optimization of biosensor material formulations for immunodiagnostic applications based on experimental findings and hypotheses by Wang and Wu [1, 2], and using a test-plate apparatus and thin-film design developed by Young [3]. (Abstract shortened by ProQuest.).
Ferrighi, Lara; Frediani, Luca; Fossgaard, Eirik; Ruud, Kenneth
2006-10-01
We present a parallel implementation of the integral equation formalism of the polarizable continuum model for Hartree-Fock and density functional theory calculations of energies and linear, quadratic, and cubic response functions. The contributions to the free energy of the solute due to the polarizable continuum have been implemented using a master-slave approach with load balancing to ensure good scalability also on parallel machines with a slow interconnect. We demonstrate the good scaling behavior of the code through calculations of Hartree-Fock energies and linear, quadratic, and cubic response function for a modest-sized sample molecule. We also explore the behavior of the parallelization of the integral equation formulation of the polarizable continuum model code when used in conjunction with a recent scheme for the storage of two-electron integrals in the memory of the different slaves in order to achieve superlinear scaling in the parallel calculations.
Displaced path integral formulation for the momentum distribution of quantum particles
Lin, Lin; Car, Roberto; Parrinello, Michele
2010-01-01
The proton momentum distribution, accessible by deep inelastic neutron scattering, is a very sensitive probe of the potential of mean force experienced by the protons in hydrogen-bonded systems. In this work we introduce a novel estimator for the end to end distribution of the Feynman paths, i.e. the Fourier transform of the momentum distribution. In this formulation, free particle and environmental contributions factorize. Moreover, the environmental contribution has a natural analogy to a free energy surface in statistical mechanics, facilitating the interpretation of experiments. The new formulation is not only conceptually but also computationally advantageous. We illustrate the method with applications to one-dimensional model systems and to an empirical water model.
Explicit volume-preserving and symplectic integrators for trigonometric polynomial flows
Quispel, G R W
2003-01-01
We introduce explicit volume-preserving and symplectic integrators for the case of generalized trigonometric polynomial flows. The method is demonstrated using the Arter flow, and computational trials are conducted using a 4-dimensional vector field.
Energy Technology Data Exchange (ETDEWEB)
Bammann, Douglas J.; Johnson, G. C. (University of California, Berkeley, CA); Marin, Esteban B.; Regueiro, Richard A. (University of Colorado, Boulder, CO)
2006-01-01
In this report we present the formulation of the physically-based Evolving Microstructural Model of Inelasticity (EMMI) . The specific version of the model treated here describes the plasticity and isotropic damage of metals as being currently applied to model the ductile failure process in structural components of the W80 program . The formulation of the EMMI constitutive equations is framed in the context of the large deformation kinematics of solids and the thermodynamics of internal state variables . This formulation is focused first on developing the plasticity equations in both the relaxed (unloaded) and current configurations. The equations in the current configuration, expressed in non-dimensional form, are used to devise the identification procedure for the plasticity parameters. The model is then extended to include a porosity-based isotropic damage state variable to describe the progressive deterioration of the strength and mechanical properties of metals induced by deformation . The numerical treatment of these coupled plasticity-damage constitutive equations is explained in detail. A number of examples are solved to validate the numerical implementation of the model.
Helicity is the only integral invariant of volume-preserving transformations.
Enciso, Alberto; Peralta-Salas, Daniel; de Lizaur, Francisco Torres
2016-02-23
We prove that any regular integral invariant of volume-preserving transformations is equivalent to the helicity. Specifically, given a functional I defined on exact divergence-free vector fields of class C(1) on a compact 3-manifold that is associated with a well-behaved integral kernel, we prove that I is invariant under arbitrary volume-preserving diffeomorphisms if and only if it is a function of the helicity.
Economic development through biomass system integration: Volume 1
Energy Technology Data Exchange (ETDEWEB)
DeLong, M.M. [Northern States Power Co., Minneapolis, MN (United States)
1995-10-01
This report documents a feasibility study for an integrated biomass power system, where an energy crop (alfalfa) is the feedstock for a processing plant and a power plant (integrated gasification combined cycle) in a way that benefits the facility owners. Chapters describe alfalfa basics, production risks, production economics, transportation and storage, processing, products, market analysis, business analysis, environmental impact, and policy issues. 69 figs., 63 tabs.
Liou, Luen-Woei; Ray, Asok
1991-01-01
A state feedback control law for integrated communication and control systems (ICCS) is formulated by using the dynamic programming and optimality principle on a finite-time horizon. The control law is derived on the basis of a stochastic model of the plant which is augmented in state space to allow for the effects of randomly varying delays in the feedback loop. A numerical procedure for synthesizing the control parameters is then presented, and the performance of the control law is evaluated by simulating the flight dynamics model of an advanced aircraft. Finally, recommendations for future work are made.
Energy Technology Data Exchange (ETDEWEB)
Spence, R.D.; McDaniel, E.W. [Oak Ridge National Lab., TN (United States); Anderson, C.M.; Lokken, R.O.; Piepel, G.F. [Pacific Northwest Lab., Richland, WA (United States)
1993-09-01
Twenty potential ingredients were identified for use in developing a 106-AN grout formulation, and 18 were subsequently obtained and tested. Four ingredients: Type II-LA (moderate heat of hydration) Portland cement, Class F fly ash, attapulgite 150 drilling clay, and ground air-cooled blast-furnace slag (GABFS) -- were selected for developing the 106-AN grout formulations. A mixture experiment was designed and conducted around the following formulation: 2.5 lb of cement per gallon, 1.2 lb of fly ash per gallon, 0.8 lb of attapulgite per gallon, and 3.5 lb of GABFS per gallon. Reduced empirical models were generated from the results of the mixture experiment. These models were used to recommend several grout formulations for 106-AN. Westinghouse Hanford Company selected one of these formulations to be verified for use with 106-AN and a backup formulation in case problems arise with the first choice. This report presents the mixture-experimental results and leach data.
Advanced Amine Solvent Formulations and Process Integration for Near-Term CO2 Capture Success
Energy Technology Data Exchange (ETDEWEB)
Fisher, Kevin S.; Searcy, Katherine; Rochelle, Gary T.; Ziaii, Sepideh; Schubert, Craig
2007-06-28
This Phase I SBIR project investigated the economic and technical feasibility of advanced amine scrubbing systems for post-combustion CO2 capture at coal-fired power plants. Numerous combinations of advanced solvent formulations and process configurations were screened for energy requirements, and three cases were selected for detailed analysis: a monoethanolamine (MEA) base case and two “advanced” cases: an MEA/Piperazine (PZ) case, and a methyldiethanolamine (MDEA) / PZ case. The MEA/PZ and MDEA/PZ cases employed an advanced “double matrix” stripper configuration. The basis for calculations was a model plant with a gross capacity of 500 MWe. Results indicated that CO2 capture increased the base cost of electricity from 5 cents/kWh to 10.7 c/kWh for the MEA base case, 10.1 c/kWh for the MEA / PZ double matrix, and 9.7 c/kWh for the MDEA / PZ double matrix. The corresponding cost per metric tonne CO2 avoided was 67.20 $/tonne CO2, 60.19 $/tonne CO2, and 55.05 $/tonne CO2, respectively. Derated capacities, including base plant auxiliary load of 29 MWe, were 339 MWe for the base case, 356 MWe for the MEA/PZ double matrix, and 378 MWe for the MDEA / PZ double matrix. When compared to the base case, systems employing advanced solvent formulations and process configurations were estimated to reduce reboiler steam requirements by 20 to 44%, to reduce derating due to CO2 capture by 13 to 30%, and to reduce the cost of CO2 avoided by 10 to 18%. These results demonstrate the potential for significant improvements in the overall economics of CO2 capture via advanced solvent formulations and process configurations.
Directory of Open Access Journals (Sweden)
Mojtaba Biglar
2014-01-01
Full Text Available This study addresses new formulation for active vibration control of plates by optimal locations of attached piezotransducers. Free vibrations are solved by Rayleigh-Ritz and transient by assumed modes methods. Optimal orientations of patches are determined by spatial controllability/observability, as well as residual modes to reduce spillover. These criteria are used to achieve optimal fitness function defined for genetic algorithm to find optimal locations. To control vibrations, negative velocity feedback control is designed. Results indicate that, by locating piezopatches at optimal positions, depreciation rate increases and amplitudes of vibrations reduce effectively. The effect of number of piezodevices is analyzed.
Milton, Kimball A
2015-01-01
Starting from the earlier notions of stationary action principles, these tutorial notes shows how Schwinger’s Quantum Action Principle descended from Dirac’s formulation, which independently led Feynman to his path-integral formulation of quantum mechanics. Part I brings out in more detail the connection between the two formulations, and applications are discussed. Then, the Keldysh-Schwinger time-cycle method of extracting matrix elements is described. Part II will discuss the variational formulation of quantum electrodynamics and the development of source theory.
Monte Carlo solution of the volume-integral equation of electromagnetic scattering
Peltoniemi, J.; Muinonen, K.
2014-07-01
Electromagnetic scattering is often the main physical process to be understood when interpreting the observations of asteroids, comets, and meteors. Modeling the scattering faces still many problems, and one needs to assess several different cases: multiple scattering and shadowing by the rough surface, multiple scattering inside a surface element, and single scattering by a small object. Our specific goal is to extend the electromagnetic techniques to larger and more complicated objects, and derive approximations taking into account the most important effects of waves. Here we experiment with Monte Carlo techniques: can they provide something new to solving the scattering problems? The electromagnetic wave equation in the presence of a scatterer of volume V and refractive index m, with an incident wave EE_0, including boundary conditions and the scattering condition at infinity, can be presented in the form of an integral equation EE(rr)(1+suski(rr) Q(ρ))-int_{V-V_ρ}ddrr' GG(rr-rr')suski(rr')EE(rr') =EE_0, where suski(rr)=m(rr)^2-1, Q(ρ)=-1/3+{cal O}(ρ^2)+{O'}(m^2ρ^2), {O}, and {O'} are some second- and higher-order corrections for the finite-size volume V_ρ of radius ρ around the singularity and GG is the dyadic Green's function of the form GG(RR)={exp(im kR)}/{4π R}[unittensor(1+{im}/{R}-{1}/{R^2})-RRRR(1+{3im}/{R}-{3}/{R^2})]. In general, this is solved by extending the internal field in terms of some simple basis functions, e.g., plane or spherical waves or a cubic grid, approximating the integrals in a clever way, and determining the goodness of the solution somehow, e.g., moments or least square. Whatever the choice, the solution usually converges nicely towards a correct enough solution when the scatterer is small and simple, and diverges when the scatterer becomes too complicated. With certain methods, one can reach larger scatterers faster, but the memory and CPU needs can be huge. Until today, all successful solutions are based on more or less
Liu, Cuihua; Dong, Shiming; Xu, Xiao-Jin; Yin, Yan; Shriver, Zachary; Capila, Ishan; Myette, James; Venkataraman, Ganesh
2011-01-05
Biological drugs represent an important and rapidly growing class of therapeutics useful in the treatment of a variety of disorders ranging from cancer to inflammation to infectious diseases. Unlike single chemical entities, the recombinant production of these drugs in living cells confers considerable structural and chemical heterogeneity to the biologically derived protein product that constitutes the active pharmaceutical ingredient (API). In mammalian based expression systems, much of this diversity is conferred through heterogeneous protein glycosylation. These post-translational modifications can have significant effects on the structure, biological function, and pharmacological properties of the API. In addition, the bulk proteins that comprise the API are further formulated through the use of multiple excipients designed to ensure product stability, solubility, and lot-to-lot consistency. Unfortunately, these matrices can interfere with commonly available analytical methods used in the thorough chemical characterization of the biological drug product. At the same time, a demonstration of the suitable extraction of the bulk drug substance in a manner and form that does not destabilize the active ingredient or introduce any structural bias with direct reference to the original drug product is both critical and necessary. Here, we use recombinant human follicle stimulating hormone (follitropin alpha for injection) from a pharmaceutical source as an example to illustrate a suitable purification strategy to effectively extract the bulk drug substance from the formulated drug product with high purity and yield. We assess the suitability of this extraction method in preserving the structural integrity and overall quality of the drug substance relative to the formulated drug product, placing a particular emphasis on glycosylation as a key product attribute. In so doing, we demonstrate that it is possible to effectively extract the active pharmaceutical ingredient
DNFSB Recommendation 94-1 Hanford Site Integrated Stabilization Management Plan. Volume 2
Energy Technology Data Exchange (ETDEWEB)
McCormack, R.L.
1995-08-01
The Hanford Site Integrated Stabilization Management Plan (SISMP) is being developed in support of the US Department of Energy`s (DOE) Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 94-1 Integrated Program Plan (IPP). Volume 1 of the SISMP identifies the technical scope and costs associated with Hanford Site plans to resolve concerns identified in DNFSB Recommendation 94-1. Volume 2 of the SISMP provides the Resource Loaded Integrated Schedules for Spent Nuclear Fuel Project and Plutonium Finishing Plant activities identified in Volume 1 of the SISMP. Appendix A provides the schedules and progress curves related to spent nuclear fuel management. Appendix B provides the schedules and progress curves related to plutoniumbearing material management. Appendix C provides programmatic logic diagrams that were referenced in Volume 1 of the SISMP.
Integration of Diagnostics into Ground Equipment Study. Volume 2
2003-10-21
is serious about meeting its deadline. Many logistics providers, third party logistics ( 3PL ) and fourth party logistics (4PL) companies need to...www.glualcomm.comlpress/pr/releasesl 998/press937.html Penske Logistics provides integrated logistics services to customers throughout the United States, Mexico and
Generalized functions, volume 5 integral geometry and representation theory
Gel′fand, I M; Vilenkin, N Ya; Vilenkin, N Ya
2016-01-01
The first systematic theory of generalized functions (also known as distributions) was created in the early 1950s, although some aspects were developed much earlier, most notably in the definition of the Green's function in mathematics and in the work of Paul Dirac on quantum electrodynamics in physics. The six-volume collection, Generalized Functions, written by I. M. Gel′fand and co-authors and published in Russian between 1958 and 1966, gives an introduction to generalized functions and presents various applications to analysis, PDE, stochastic processes, and representation theory. The unif
Panday, Sorab; Langevin, Christian D.; Niswonger, Richard G.; Ibaraki, Motomu; Hughes, Joseph D.
2013-01-01
A new version of MODFLOW, called MODFLOW–USG (for UnStructured Grid), was developed to support a wide variety of structured and unstructured grid types, including nested grids and grids based on prismatic triangles, rectangles, hexagons, and other cell shapes. Flexibility in grid design can be used to focus resolution along rivers and around wells, for example, or to subdiscretize individual layers to better represent hydrostratigraphic units. MODFLOW–USG is based on an underlying control volume finite difference (CVFD) formulation in which a cell can be connected to an arbitrary number of adjacent cells. To improve accuracy of the CVFD formulation for irregular grid-cell geometries or nested grids, a generalized Ghost Node Correction (GNC) Package was developed, which uses interpolated heads in the flow calculation between adjacent connected cells. MODFLOW–USG includes a Groundwater Flow (GWF) Process, based on the GWF Process in MODFLOW–2005, as well as a new Connected Linear Network (CLN) Process to simulate the effects of multi-node wells, karst conduits, and tile drains, for example. The CLN Process is tightly coupled with the GWF Process in that the equations from both processes are formulated into one matrix equation and solved simultaneously. This robustness results from using an unstructured grid with unstructured matrix storage and solution schemes. MODFLOW–USG also contains an optional Newton-Raphson formulation, based on the formulation in MODFLOW–NWT, for improving solution convergence and avoiding problems with the drying and rewetting of cells. Because the existing MODFLOW solvers were developed for structured and symmetric matrices, they were replaced with a new Sparse Matrix Solver (SMS) Package developed specifically for MODFLOW–USG. The SMS Package provides several methods for resolving nonlinearities and multiple symmetric and asymmetric linear solution schemes to solve the matrix arising from the flow equations and the Newton
Fort Stewart integrated resource assessment. Volume 3: Resource assessment
Energy Technology Data Exchange (ETDEWEB)
Sullivan, G.P.; Keller, J.M.; Stucky, D.J.; Wahlstrom, R.R.; Larson, L.L.
1993-10-01
The US Army Forces Command (FORSCOM) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Stewart. This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the FORSCOM Fort Stewart facility located approximately 25 miles southwest of Savannah, Georgia. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative description of each ERO is provided, along with a table detailing information on the installed cost, energy and dollar savings; impacts on operations and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO. The tables also present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and savings to investment ratio (SIR) of each ERO.
Directory of Open Access Journals (Sweden)
Mooranian A
2014-09-01
Full Text Available Armin Mooranian,1 Rebecca Negrulj,1 Nigel Chen-Tan,2 Gerald F Watts,3 Frank Arfuso,4 Hani Al-Salami11Biotechnology and Drug Development Research Laboratory, School of Pharmacy, Curtin Health Innovation Research Institute, Biosciences Research Precinct, Curtin University, 2Faculty of Science and Engineering, Curtin University, 3School of Medicine and Pharmacology, Royal Perth Hospital, University of Western Australia, 4School of Biomedical Science, Curtin Health Innovation Research Institute, Biosciences Research Precinct, Curtin University, Perth, AustraliaAbstract: The authors have previously designed, developed, and characterized a novel microencapsulated formulation as a platform for the targeted delivery of therapeutics in an animal model of type 2 diabetes, using the drug probucol (PB. The aim of this study was to optimize PB microcapsules by incorporating the bile acid deoxycholic acid (DCA, which has good permeation-enhancing properties, and to examine its effect on microcapsules’ morphology, rheology, structural and surface characteristics, and excipients’ chemical and thermal compatibilities. Microencapsulation was carried out using a BÜCHI-based microencapsulating system established in the authors’ laboratory. Using the polymer sodium alginate (SA, two microencapsulated formulations were prepared: PB-SA (control and PB-DCA-SA (test at a constant ratio (1:30 and 1:3:30, respectively. Complete characterization of the microcapsules was carried out. The incorporation of DCA resulted in better structural and surface characteristics, uniform morphology, and stable chemical and thermal profiles, while size and rheological parameters remained similar to control. In addition, PB-DCA-SA microcapsules showed good excipients’ compatibilities, which were supported by data from differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray studies, suggesting
Preconditioning first and second kind integral formulations of the capacitance problem
Energy Technology Data Exchange (ETDEWEB)
Tausch, J.; White, J.
1996-12-31
Engineering programs which compute electrostatic capacitances for complicated arrangements of conductors commonly set up the electrostatic potential u as a superposition of surface carges {sigma} u(x) = {integral}{sub s}G(x, y){sigma}(y) dS(y). Where G(x, y) = {1/4}{pi}{vert_bar}x - y{vert_bar} is the Green`s function for the Laplacian in the three-space. For a specified potential on the conductor surface(s) S, this approach leads to an integral equation of the first kind on S for the charge density {sigma}. The capacitance is the net-charge on the conductors and is given by the surface integral of {sigma}.
Spacelab software development and integration concepts study report, volume 1
Rose, P. L.; Willis, B. G.
1973-01-01
The proposed software guidelines to be followed by the European Space Research Organization in the development of software for the Spacelab being developed for use as a payload for the space shuttle are documented. Concepts, techniques, and tools needed to assure the success of a programming project are defined as they relate to operation of the data management subsystem, support of experiments and space applications, use with ground support equipment, and for integration testing.
Robust integral formulations for electromagnetic scattering from three-dimensional cavities
Lai, Jun; Greengard, Leslie; O'Neil, Michael
2017-09-01
Scattering from large, open cavity structures is of importance in a variety of electromagnetic applications. In this paper, we propose a new well conditioned integral equation for scattering from general open cavities embedded in an infinite, perfectly conducting half-space. The integral representation permits the stable evaluation of both the electric and magnetic field, even in the low-frequency regime, using the continuity equation in a post-processing step. We establish existence and uniqueness results, and demonstrate the performance of the scheme in the cavity-of-revolution case. High-order accuracy is obtained using a Nyström discretization with generalized Gaussian quadratures.
Farris, Patricia K; Edison, Brenda L; Weinkauf, Ronni L; Green, Barbara A
2014-01-01
Facial lines and wrinkles are caused by many factors including constant exposure to external elements, such as UV rays, as well as the dynamic nature of facial expression. Many cosmetic products and procedures provide global improvement to aging skin, whereas injectable therapies are frequently utilized to diminish specific, target wrinkles. Despite their broad availability, some patients are unwilling to undergo injectables and would benefit from an effective topical option. A noninvasive option to volumize target wrinkle areas could also extend benefits of commonly used cosmetic anti-aging products. To this end, a two-step formulation containing the novel, cosmetic anti-aging ingredient, N-acetyl tyrosinamide, was developed for use on targeted wrinkle areas. The tolerability and efficacy of the serum plus cream were tested for 16 weeks in women with moderate facial photodamage on predetermined wrinkle areas (glabellar lines, nasolabial folds, under eye lines, and lateral canthal (crow's feet) wrinkles) in a single-center, randomized, double-blind, vehicle-controlled, clinical trial. Seventy women (47 Active group, 23 Vehicle group) completed the study. Digital photography, clinical grading, ultrasound and self-assessment scores confirmed improvement to wrinkle areas. The topical cosmetic formulation was statistically superior (Pcosmetic formulation reduced the appearance of wrinkles and increased skin elasticity thus providing an effective anti-aging option for target wrinkle areas. This study suggests that in addition to its use as monotherapy for reducing targeted lines and wrinkles this cosmetic formulation may be also serve as an adjuvant to injectable therapies.
Energy Technology Data Exchange (ETDEWEB)
Georgopoulos, P.G.; Walia, A.; Roy, A.; Lioy, P.J. [Rutgers Univ. and Univ. of Medicine & Dentistry of New Jersey, Piscataway, NJ (United States)
1997-01-01
The conceptual and theoretical framework for a modular integrated Exposure and Dose Modeling and Analysis System (EDMAS) has been formulated, and its stepwise implementation and testing is currently in progress. This system aims to provide state-of-the art tools for performing integrated assessments of exposure and dose for individuals and populations. The integration of modeling components with each other as well as with available environmental, exposure, and toxicological databases in being accomplished with the use of computational tools that include interactive simulation environments, Geographical information Systems, and various data retrieval, management, statistical analysis, and visualization methods. This paper overviews the structure and modular nature of this integrated modeling system and focuses specifically on two of its components: (a) a hierarchy of physiologically based pharmacokinetic models (PBPKM), representing various levels of detail and sophistication, and (b) a family of microenvironmental models, that incorporate complex physical and chemical transformations. The deterministic implementation of these components is also presented here in two test applications: (i) a case study of benzene exposure indoors resulting from the volatilization of contaminated tap water and (ii) a case study of photochemical pollution infiltration indoors, in an office building environment. 77 refs., 6 figs., 2 tabs.
Fort Drum integrated resource assessment. Volume 2, Baseline detail
Energy Technology Data Exchange (ETDEWEB)
Dixon, D.R.; Armstrong, P.R.; Brodrick, J.R.; Daellenbach, K.K.; Di Massa, F.V.; Keller, J.M.; Richman, E.E.; Sullivan, G.P.; Wahlstrom, R.R.
1992-12-01
The US Army Forces Command (FORSCOM) has tasked the Pacific Northwest Laboratory (PNL) as the lead laboratory supporting the US Department of Energy (DOE) Federal Energy Management Program`s mission to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Drum. This is a model program PNL is designing for federal customers served by the Niagara Mohawk Power Company. It will identify and evaluate all electric and fossil fuel cost-effective energy projects; develop a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and secure 100% of the financing required to implement electric energy efficiency projects from Niagara Mohawk and have Niagara Mohawk procure the necessary contractors to perform detailed audits and install the technologies. This report documents the assessment of baseline energy use at one of Niagara Mohawk`s primary federal facilities, the FORSCOM Fort Drum facility located near Watertown, New York. It is a companion report to Volume 1, the Executive Summary, and Volume 3, the Resource Assessment. This analysis examines the characteristics of electric, gas, oil, propane, coal, and purchased thermal capacity use for fiscal year (FY) 1990. It records energy-use intensities for the facilities at Fort Drum by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, central systems, and applicable losses.
Painter, Scott L.; Coon, Ethan T.; Atchley, Adam L.; Berndt, Markus; Garimella, Rao; Moulton, J. David; Svyatskiy, Daniil; Wilson, Cathy J.
2016-08-01
The need to understand potential climate impacts and feedbacks in Arctic regions has prompted recent interest in modeling of permafrost dynamics in a warming climate. A new fine-scale integrated surface/subsurface thermal hydrology modeling capability is described and demonstrated in proof-of-concept simulations. The new modeling capability combines a surface energy balance model with recently developed three-dimensional subsurface thermal hydrology models and new models for nonisothermal surface water flows and snow distribution in the microtopography. Surface water flows are modeled using the diffusion wave equation extended to include energy transport and phase change of ponded water. Variation of snow depth in the microtopography, physically the result of wind scour, is modeled phenomenologically with a diffusion wave equation. The multiple surface and subsurface processes are implemented by leveraging highly parallel community software. Fully integrated thermal hydrology simulations on the tilted open book catchment, an important test case for integrated surface/subsurface flow modeling, are presented. Fine-scale 100 year projections of the integrated permafrost thermal hydrological system on an ice wedge polygon at Barrow Alaska in a warming climate are also presented. These simulations demonstrate the feasibility of microtopography-resolving, process-rich simulations as a tool to help understand possible future evolution of the carbon-rich Arctic tundra in a warming climate.
DEFF Research Database (Denmark)
Kim, Oleksiy S.
2016-01-01
A new technique for estimating the impedance frequency bandwidth of electrically small antennas loaded with magneto-dielectric material from a single-frequency simulation in a surface integral equation solver is presented. The estimate is based on the inverse of the radiation Q computed using newly...
CSIR Research Space (South Africa)
Long, CS
2009-01-01
Full Text Available on that there are several numerical issues which need to be carefully dealt with in order to achieve sensible results, for ex- ample see Sigmund and Petersson (1998) for a review. One of the numerical issues that has received significant attention is the problem... other arrangement of the two constitute materials with the same volume. In essence, they concluded that since quadratic Q9 elements are ‘softer’ than Q4 elements, they are less likely to checkerboard. However, the numerical stabil- ity of higher...
Volume Integral of the Pressure Gradient and Archimedes' Principle
Pickett, Galen T
2014-01-01
The theorems of vector analysis (divergence theorem, etc.) are typically first applied in the undergraduate physics curriculum in the context of the electromagnetic field and the differential forms of Maxwell's equations. However, these tools are analyzed in depth several courses later in the junior-senior level. I discuss here a "bridge" problem, using the language of vector calculus in a mechanics setting to understand Archimedes' principle as a consequence of hydrostatic equilibrium and the superposition of the external forces. It is my hope that this treatment will help students better integrate and understand understand these and similar vector analysis results in contexts beyond electromagnetism.
Integrated Unmanned Air-Ground Robotics System, Volume 4
2001-08-20
Winkeler, Sherri Adlich Programmatics Pat McInnis, Jim Sanders, John Carter, Jim Kirkwood Systems Integration Jim Dinges; George Smith Mechanical...les vies des soldats sur les champs de bataille , le développement de drones apparaît comme la solution idéale. Ces systèmes étant capables de missions...préserver les vies des soldats sur les champs de bataille , le développement de drones apparaît comme la solution idéale. Ces systèmes étant capables de
Pan, JianHua; Ren, YuXin
2017-08-01
In this paper, a family of sub-cell finite volume schemes for solving the hyperbolic conservation laws is proposed and analyzed in one-dimensional cases. The basic idea of this method is to subdivide a control volume (main cell) into several sub-cells and the finite volume discretization is applied to each of the sub-cells. The averaged values on the sub-cells of current and face neighboring main cells are used to reconstruct the polynomial distributions of the dependent variables. This method can achieve arbitrarily high order of accuracy using a compact stencil. It is similar to the spectral volume method incorporating with PNPM technique but with fundamental differences. An elaborate utilization of these differences overcomes some shortcomings of the spectral volume method and results in a family of accurate and robust schemes for solving the hyperbolic conservation laws. In this paper, the basic formulation of the proposed method is presented. The Fourier analysis is performed to study the properties of the one-dimensional schemes. A WENO limiter based on the secondary reconstruction is constructed.
A time integral formulation and algorithm for structural dynamics with nonlinear stiffness
Institute of Scientific and Technical Information of China (English)
Kaiping Yu; Jie Zhao
2006-01-01
A newly-developed numerical algorithm, which is called the new Generalized-α(G-α)method, is presented for solving structural dynamics problems with nonlinear stiffness. The traditional G-α method has undesired overshoot properties as for a class of α-method. In the present work, seven independent parameters are introduced into the single-step three-stage algorithmic formulations and the nonlinear internal force at every time interval is approximated by means of the generalized trapezoidal rule, and then the algorithm is implemented based on the finite difference theory. An analysis on the stability, accuracy, energy and overshoot properties of the proposed scheme is performed in the nonlinear regime. The values or the ranges of values of the seven independent parameters are determined in the analysis process. The computational results obtained by the new algorithm show that the displacement accuracy is of order two, and the acceleration can also be improved to a second order accuracy by a suitable choice of parameters. Obviously, the present algorithm is zerostable, and the energy conservation or energy decay can be realized in the high-frequency range, which can be regarded as stable in an energy sense. The algorithmic overshoot can be completely avoided by using the new algorithm without any constraints with respect to the damping force and initial conditions.
Multi-hamiltonian formulation for a class of degenerate completely integrable systems
Bueken, P
1994-01-01
: Generalizing a construction of P. Vanhaecke, we introduce a large class of degenerate (i.e., associated to a degenerate Poisson bracket) completely integrable systems on (a dense subset of) the space \\R^{2d+n+1}, called the generalized master systems. It turns out that certain generalized master systems (with different Poisson brackets and different Hamiltonians) determine the same Hamiltonian vector fields (and are therefore different descriptions of the same Hamiltonian system), and that the Poisson brackets of these systems are compatible. Consequently, our class of generalized master systems actually consists of a (smaller) class of completely integrable systems, and our construction yields a multi-Hamiltonian structure for these systems. As an application, we construct a multi-Hamiltonian structure for the so-called master systems introduced by D. Mumford.
An integrable generalization of the super AKNS hierarchy and its bi-Hamiltonian formulation
Yu, Jing; Ma, Wen-Xiu; Han, Jingwei; Chen, Shouting
2017-02-01
Based on a Lie super-algebra B(0, 1), an integrable generalization of the super AKNS iso-spectral problem is introduced and its corresponding generalized super AKNS hierarchy is generated. By making use of the super-trace identity (or the super variational identity), the resulting super soliton hierarchy can be put into a super bi-Hamiltonian form. A generalized super AKNS soliton hierarchy with self-consistent sources is also presented.
DEFF Research Database (Denmark)
Tang, Tian; Roenby, Johan; Hededal, Ole
by formulating the strong interactions between soil skeleton and the pore fluid via a coupled set of partial differential equations. A single bounding surface soil model capable of simulating the accumulations of pore pressures, strains, dilatancy, and strain „softening‟, is then adopted for quantifying...... the cyclic soil constitutive relations. To deal with the high non-linearity in the equations, the finite volume (FV) method is proposed for the numerical simulation. The corresponding discretization strategies and solution algorithms, including the conventional segregated method and the more recent block...
Gover, A. Rod; Waldron, Andrew
2017-09-01
We develop a universal distributional calculus for regulated volumes of metrics that are suitably singular along hypersurfaces. When the hypersurface is a conformal infinity we give simple integrated distribution expressions for the divergences and anomaly of the regulated volume functional valid for any choice of regulator. For closed hypersurfaces or conformally compact geometries, methods from a previously developed boundary calculus for conformally compact manifolds can be applied to give explicit holographic formulæ for the divergences and anomaly expressed as hypersurface integrals over local quantities (the method also extends to non-closed hypersurfaces). The resulting anomaly does not depend on any particular choice of regulator, while the regulator dependence of the divergences is precisely captured by these formulæ. Conformal hypersurface invariants can be studied by demanding that the singular metric obey, smoothly and formally to a suitable order, a Yamabe type problem with boundary data along the conformal infinity. We prove that the volume anomaly for these singular Yamabe solutions is a conformally invariant integral of a local Q-curvature that generalizes the Branson Q-curvature by including data of the embedding. In each dimension this canonically defines a higher dimensional generalization of the Willmore energy/rigid string action. Recently, Graham proved that the first variation of the volume anomaly recovers the density obstructing smooth solutions to this singular Yamabe problem; we give a new proof of this result employing our boundary calculus. Physical applications of our results include studies of quantum corrections to entanglement entropies.
Integrating model of the Project Independence Evaluation System. Volume IV. Model documentation
Energy Technology Data Exchange (ETDEWEB)
Shaw, M L; Allen, B J; Gale, J E; Lutz, M S; O& #x27; Hara, N E; Wood, R K
1979-02-01
This volume is the fourth in a series of seven documenting the PIES Integrating Model. It contains detailed descriptions of the basic assumptions behind each of the components of PIES and how they interact with one another. Chapter II of this volume presents the methodology used to integrate supply and demand. It includes a discussion of both the interface between the Demand Model and the equilibrating mechanism and the various supply models via the equilibrating algorithm used by PIES. Chapters III through IX describe each supply submodel in turn: coal, oil, and natural gas supply, utilities, refineries, advanced technologies, and transportation. Code and data documentation are covered elsewhere in this series (Volumes V and VI respectively). PIES is an evolving system. As this document was being prepared, many parts of the model were being modified. This document describes the PIES Integrating Model as of January 1, 1978.
Energy Technology Data Exchange (ETDEWEB)
Shlivinski, A., E-mail: amirshli@ee.bgu.ac.il [Department of Electrical and Computer Engineering, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel); Lomakin, V., E-mail: vlomakin@eng.ucsd.edu [Department of Electrical and Computer Engineering, University of California, San Diego, 9500 Gilman Drive, La Jolla, CA 92093-0407 (United States)
2016-03-01
Scattering or coupling of electromagnetic beam-field at a surface discontinuity separating two homogeneous or inhomogeneous media with different propagation characteristics is formulated using surface integral equation, which are solved by the Method of Moments with the aid of the Gabor-based Gaussian window frame set of basis and testing functions. The application of the Gaussian window frame provides (i) a mathematically exact and robust tool for spatial-spectral phase-space formulation and analysis of the problem; (ii) a system of linear equations in a transmission-line like form relating mode-like wave objects of one medium with mode-like wave objects of the second medium; (iii) furthermore, an appropriate setting of the frame parameters yields mode-like wave objects that blend plane wave properties (as if solving in the spectral domain) with Green's function properties (as if solving in the spatial domain); and (iv) a representation of the scattered field with Gaussian-beam propagators that may be used in many large (in terms of wavelengths) systems.
Localized brain volume and white matter integrity alterations in adolescent anorexia nervosa.
Frank, Guido K W; Shott, Megan E; Hagman, Jennifer O; Yang, Tony T
2013-10-01
The neurobiological underpinnings of anorexia nervosa (AN) are poorly understood. In this study, we tested whether brain gray matter (GM) and white matter (WM) in adolescents with AN would show alterations comparable to those in adults. We used magnetic resonance imaging to study GM and WM volume, and diffusion tensor imaging to assess fractional anisotropy for WM integrity in 19 adolescents with AN and 22 controls. Individuals with AN showed greater left orbitofrontal, right insular, and bilateral temporal cortex GM, as well as temporal lobe WM volumes compared to controls. WM integrity in adolescents with AN was lower (lower fractional anisotropy) in fornix, posterior frontal, and parietal areas, but higher in anterior frontal, orbitofrontal, and temporal lobes. In individuals with AN, orbitofrontal GM volume correlated negatively with sweet taste pleasantness. An additional comparison of this study cohort with adult individuals with AN and healthy controls supported greater orbitofrontal cortex and insula volumes in AN across age groups. This study indicates larger orbitofrontal and insular GM volumes, as well as lower fornix WM integrity in adolescents with AN, similar to adults. The pattern of larger anteroventral GM and WM volume as well as WM integrity, but lower WM integrity in posterior frontal and parietal regions may indicate that developmental factors such as GM pruning and WM growth could contribute to brain alterations in AN. The negative correlation between taste pleasantness and orbitofrontal cortex volume in individuals with AN could contribute to food avoidance in this disorder. Copyright © 2013 American Academy of Child and Adolescent Psychiatry. Published by Elsevier Inc. All rights reserved.
Fast Near-Field Calculation for Volume Integral Equations for Layered Media
DEFF Research Database (Denmark)
Kim, Oleksiy S.; Meincke, Peter; Breinbjerg, Olav
2005-01-01
An efficient technique based on the Fast Fourier Transform (FFT) for calculating near-field scattering by dielectric objects in layered media is presented. A higher or-der method of moments technique is employed to solve the volume integral equation for the unknown induced volume current density....... Afterwards, the scattered electric field can be easily computed at a regular rectangular grid on any horizontal plane us-ing a 2-dimensional FFT. This approach provides significant speedup in the near-field calculation in comparison to a straightforward numerical evaluation of the ra-diation integral since...
Moving Towards Integrated Policy Formulation and Evaluation: The Green Economy Model
Directory of Open Access Journals (Sweden)
Bassi Andrea M.
2015-12-01
Full Text Available The mainstreaming of concepts related to the Green Economy, an action-oriented approach to reach sustainable development, has increased demands for integrated models that can shed light on the complex relations existing across social, economic and environmental indicators. A gap exists, whereby our thinking is rapidly evolving, but the tools available are still in the vast majority of cases sectorial, leading to planning processes taking place in silos. To avoid the emergence of side effects, and anticipate future threats and opportunities, a more systemic approach is needed. The Green Economy Model (GEM was created taking into account four main capitals and their interconnections: physical capital, human capital, social capital and natural capital. The application of GEM in 10 countries has shown its capability to coherently represent reality and generate results that can more effectively inform decision making.
Moving Towards Integrated Policy Formulation and Evaluation: The Green Economy Model
Bassi, Andrea M.
2015-12-01
The mainstreaming of concepts related to the Green Economy, an action-oriented approach to reach sustainable development, has increased demands for integrated models that can shed light on the complex relations existing across social, economic and environmental indicators. A gap exists, whereby our thinking is rapidly evolving, but the tools available are still in the vast majority of cases sectorial, leading to planning processes taking place in silos. To avoid the emergence of side effects, and anticipate future threats and opportunities, a more systemic approach is needed. The Green Economy Model (GEM) was created taking into account four main capitals and their interconnections: physical capital, human capital, social capital and natural capital. The application of GEM in 10 countries has shown its capability to coherently represent reality and generate results that can more effectively inform decision making.
A PATH INTEGRAL FORMULATION OF THE WRIGHT-FISHER PROCESS WITH GENIC SELECTION
SCHRAIBER, JOSHUA G.
2014-01-01
The Wright-Fisher process with selection is an important tool in population genetics theory. Traditional analysis of this process relies on the diffusion approximation. The diffusion approximation is usually studied in a partial differential equations framework. In this paper, I introduce a path integral formalism to study the Wright-Fisher process with selection and use that formalism to obtain a simple perturbation series to approximate the transition density. The perturbation series can be understood in terms of Feynman diagrams, which have a simple probabilistic interpretation in terms of selective events. The perturbation series proves to be an accurate approximation of the transition density for weak selection and is shown to be arbitrarily accurate for any selection coefficient. PMID:24269333
DNFSB Recommendation 94-1 Hanford site integrated stabilization management plan, volumes 1 and 2
Energy Technology Data Exchange (ETDEWEB)
Gerber, E.W.
1996-03-15
This document comprises the Hanford Site Integrated Stabilization Management Plan (SISMP). This document describes the DOE`s plans at the Hanford Site to address concerns identified in Defense Nuclear Facilites Safety Board (DNFSB) Recommendation 94-1. This document also identifies plans for other spent nuclear fuel (SNF) inventories at the Hanford Site which are not within the scope of DNFSB Recommendation 94-1 for reference purposes because of their interrelationship with plans for SNF within the scope of DNFSB Recommendation 94-1. The SISMP was also developed to assist DOE in initial formulation of the Research and Development Plan and the Integrated Facilities Plan.
Formulation of an Integrated Model for Freshwater Resources Policy Evaluation in Jordan
Gorelick, S.; Yoon, J.; Gawel, E.; Klauer, B.; Klassert, C. J. A.; Sigel, K.; Tilmant, A.; Lachaut, T.; Avisse, N.; Harou, J. J.; Padula, S.; Mustafa, D.
2014-12-01
Jordan is one of the four water poorest countries in the world. It is a highly vulnerable arid region whose freshwater system is at a tipping point due to the confluence of severely limited water supplies, rapid population growth, refugee influxes, climate change and variability, internal and transboundary competition for shared freshwater resources, and institutional impediments. Our team is engaged in an interdisciplinary effort aimed at developing a new approach to evaluate policies that enhance sustainability of freshwater resource systems. Our work adopts a multi-agent modeling framework that incorporates institutional complexity to evaluate policy instruments for improving water security in Jordan. We are developing this model using a modular approach, integrating biophysical modules that simulate natural and engineered phenomena (e.g., groundwater-surface water flow, reservoir storage, network routing, salt balance, and crop yield) with human modules that represent behavior at multiple scales of decision making. The human modules adopt a multi-agent simulation approach, defining agents as autonomous decision-makers at the government, administrative, organizational, and user levels. Our goal is to construct a suite of policy intervention scenarios that will form the basis for analysis of freshwater sustainability. This work has benefitted from a strong working relationship with leaders of the water sector in Jordan. Our approach and the merit of the policy interventions should have significant transfer value to other water-stressed regions.
Formulation of a strategy for monitoring control integrity in critical digital control systems
Belcastro, Celeste M.; Fischl, Robert; Kam, Moshe
1991-01-01
Advanced aircraft will require flight critical computer systems for stability augmentation as well as guidance and control that must perform reliably in adverse, as well as nominal, operating environments. Digital system upset is a functional error mode that can occur in electromagnetically harsh environments, involves no component damage, can occur simultaneously in all channels of a redundant control computer, and is software dependent. A strategy is presented for dynamic upset detection to be used in the evaluation of critical digital controllers during the design and/or validation phases of development. Critical controllers must be able to be used in adverse environments that result from disturbances caused by an electromagnetic source such as lightning, high intensity radiated field (HIRF), and nuclear electromagnetic pulses (NEMP). The upset detection strategy presented provides dynamic monitoring of a given control computer for degraded functional integrity that can result from redundancy management errors and control command calculation error that could occur in an electromagnetically harsh operating environment. The use is discussed of Kalman filtering, data fusion, and decision theory in monitoring a given digital controller for control calculation errors, redundancy management errors, and control effectiveness.
NASA Space Flight Human System Standard, Volume 2, and HIDH (Human Integration Design Handbook)
Connolly, Janis; Fitts, David; Stroud, Kenneth; Boyer, Jennifer; Holubec, Keith; Tillman, Barry
2009-01-01
This viewgraph presentation reports on the review and re-issuance of the NASA Space Flight Human System Standard, Volume 2, and the Human Integration Design Handbook. These standards were last updated in 1995. The target date for the release is September 2009.
INTEGRATED AIR POLLUTION CONTROL SYSTEM VERSION 5.0 - VOLUME 2: TECHNICAL DOCUMENTATION
The three volume report and two diskettes document the Integrated Air Pollution Control System (IAPCS), developed for the U.S. EPA to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, an eq...
United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand).
One of the most important vehicles for promoting the concerns of the "girl child" and the elimination of gender bias is through education, and since programs in population education are being funded all over the world, population education is a suitable and effective medium for integrating messages on the girl child. This two-volume publication…
Oza, Amit R.
The focus of this study is to improve R&D effectiveness towards aerospace and defense planning in the early stages of the product development lifecycle. Emphasis is on: correct formulation of a decision problem, with special attention to account for data relationships between the individual design problem and the system capability required to size the aircraft, understanding of the meaning of the acquisition strategy objective and subjective data requirements that are required to arrive at a balanced analysis and/or "correct" mix of technology projects, understanding the meaning of the outputs that can be created from the technology analysis, and methods the researcher can use at effectively support decisions at the acquisition and conceptual design levels through utilization of a research and development portfolio strategy. The primary objectives of this study are to: (1) determine what strategy should be used to initialize conceptual design parametric sizing processes during requirements analysis for the materiel solution analysis stage of the product development lifecycle when utilizing data already constructed in the latter phase when working with a generic database management system synthesis tool integration architecture for aircraft design , and (2) assess how these new data relationships can contribute for innovative decision-making when solving acquisition hardware/technology portfolio problems. As such, an automated composable problem formulation system is developed to consider data interactions for the system architecture that manages acquisition pre-design concept refinement portfolio management, and conceptual design parametric sizing requirements. The research includes a way to: • Formalize the data storage and implement the data relationship structure with a system architecture automated through a database management system. • Allow for composable modeling, in terms of level of hardware abstraction, for the product model, mission model, and
Hu, Fang; Pizzo, Michelle E.; Nark, Douglas M.
2017-01-01
It has been well-known that under the assumption of a constant uniform mean flow, the acoustic wave propagation equation can be formulated as a boundary integral equation, in both the time domain and the frequency domain. Compared with solving partial differential equations, numerical methods based on the boundary integral equation have the advantage of a reduced spatial dimension and, hence, requiring only a surface mesh. However, the constant uniform mean flow assumption, while convenient for formulating the integral equation, does not satisfy the solid wall boundary condition wherever the body surface is not aligned with the uniform mean flow. In this paper, we argue that the proper boundary condition for the acoustic wave should not have its normal velocity be zero everywhere on the solid surfaces, as has been applied in the literature. A careful study of the acoustic energy conservation equation is presented that shows such a boundary condition in fact leads to erroneous source or sink points on solid surfaces not aligned with the mean flow. A new solid wall boundary condition is proposed that conserves the acoustic energy and a new time domain boundary integral equation is derived. In addition to conserving the acoustic energy, another significant advantage of the new equation is that it is considerably simpler than previous formulations. In particular, tangential derivatives of the solution on the solid surfaces are no longer needed in the new formulation, which greatly simplifies numerical implementation. Furthermore, stabilization of the new integral equation by Burton-Miller type reformulation is presented. The stability of the new formulation is studied theoretically as well as numerically by an eigenvalue analysis. Numerical solutions are also presented that demonstrate the stability of the new formulation.
Sapp, T. P.; Davin, D. E.
1977-01-01
The integrated payload and mission planning process for STS payloads was defined, and discrete tasks which evaluate performance and support initial implementation of this process were conducted. The scope of activity was limited to NASA and NASA-related payload missions only. The integrated payload and mission planning process was defined in detail, including all related interfaces and scheduling requirements. Related to the payload mission planning process, a methodology for assessing early Spacelab mission manager assignment schedules was defined.
Gaucher, Emmanuel; Gesret, Alexandrine; Noble, Mark; Kohl, Thomas
2016-04-01
Earthquake location is most of the time computed using the arrival time of the seismic waves observed on monitoring networks. However, three-component seismometers enable measurement of the seismic wave polarisation which is also hypocentre dependent. This information is necessary when considering single-station locations but may also be applied to local and sparse seismic networks with poor coverage to better constrain the local earthquake hypocentres, as typically seen in hydraulic fracturing or geothermal field monitoring. In this work, we propose a new Bayesian formulation that integrates the information associated with the P-wave polarisation into a probabilistic earthquake location scheme. The approach takes a single 3C-sensor perspective and uses the covariance matrix to quantify the polarisation. This matrix contains all necessary axial information including uncertainties. According to directional statistics, the tri-variate Gaussian distribution represented by the covariance matrix corresponds to an angular central Gaussian distribution when axial data are considered. This property allows us defining a simple probability density function associated with a modelled polarisation vector given the observed covariance matrix. With this approach, the non-linearity of the location problem is kept. Unlike existing least-square misfit functions, this formulation does not reduce the polarisation to a single axis and avoids inexact estimate of a priori angular uncertainties. Furthermore, it replaces the polarisation information in the spherical data space, which yields correct probability density normalisation and prevents from any weighting when combined with e.g. travel-time probability density function. We first present the Bayesian formalism. Then, several synthetic tests on a 1D velocity model are performed to illustrate the technique and to show the effect of integrating the polarisation information. In this synthetic test, we also compare the results with an
DEFF Research Database (Denmark)
Tang, Tian; Roenby, Johan; Hededal, Ole
by formulating the strong interactions between soil skeleton and the pore fluid via a coupled set of partial differential equations. A single bounding surface soil model capable of simulating the accumulations of pore pressures, strains, dilatancy, and strain „softening‟, is then adopted for quantifying...... the cyclic soil constitutive relations. To deal with the high non-linearity in the equations, the finite volume (FV) method is proposed for the numerical simulation. The corresponding discretization strategies and solution algorithms, including the conventional segregated method and the more recent block...... matrix solver, are discussed as well. Overall, investigations in this paper provide a methodology for developing a numerical code simulating liquefaction and cyclic mobility. In future work this will be implemented in practice with the aid of the open source CFD toolbox, OpenFOAM....
Directory of Open Access Journals (Sweden)
Sanjukta Das
2016-12-01
Full Text Available Juvenile delinquency is a serious social concern, characterized by disturbance in executive functions, cognitive emotion regulation and aggression. The term 'children in conflict with the law' refers to any individual below the age of 16 years, who has come in contact with the justice system as a result of committing an illegal activity or being suspected of committing an illegal activity. It can be easily understood that the Children in Conflict with Law require rehabilitative measures while they are spending their formative years of life in Juvenile Justice Homes. Rehabilitation has particularly been the focus of corrections programs for Children in Conflict with Law. Research in different parts of the world has focused on various facets of psychotherapeutic intervention like Behaviour Therapy, Contingency management programme, Family Therapy, Music therapy etc. that have been effectively applied in separate formats on these children. It is often found that while implementing psychotherapeutic intervention programmes in practice, these have often not reached up to the extent of their wholistic betterment. This is also true in the Indian context where published research in this particular domain is sparse. To reach the aim of reducing or preventing future criminal behaviour, it is much necessary to strengthen and integrate the appropriate execution of existing psychotherapeutic intervention programmes for delinquency prevention. This paper aims to delineate the conceptual formulation of an Integrated Intervention Programme which is aimed at providing rehabilitation for Children in Conflict with Law. Itincludes Psycho-education, Music Therapy, Psychodrama and finally Cognitive Behaviour Therapy as well as Cognitive Retraining to enhance positivity, aid in self expression and better emotional regulation and promote adaptive executive functioning. Starting with the Group Therapy mode, the Programme will gradually move towards an individual format
A volume-of-fluid formulation for the study of co-flowing fluids governed by the Hele-Shaw equations
Afkhami, Shahriar
2013-01-01
We present a computational framework to address the flow of two immiscible viscous liquids which co-flow into a shallow rectangular container at one side, and flow out into a holding container at the opposite side. Assumptions based on the shallow depth of the domain are used to reduce the governing equations to one of Hele-Shaw type. The distinctive feature of the numerical method is the accurate modeling of the capillary effects. A continuum approach coupled with a volume-of-fluid formulation for computing the interface motion and for modeling the interfacial tension in Hele-Shaw flows is formulated and implemented. The interface is reconstructed with a height-function algorithm. The combination of these algorithms is a novel development for the investigation of Hele-Shaw flows. The order of accuracy and convergence properties of the method are discussed with benchmark simulations. A microfluidic flow of a ribbon of fluid which co-flows with a second liquid is simulated. We show that for small capillary num...
An Electric Field Volume Integral Equation Approach to Simulate Surface Plasmon Polaritons
Directory of Open Access Journals (Sweden)
R. Remis
2013-02-01
Full Text Available In this paper we present an electric field volume integral equation approach to simulate surface plasmon propagation along metal/dielectric interfaces. Metallic objects embedded in homogeneous dielectric media are considered. Starting point is a so-called weak-form of the electric field integral equation. This form is discretized on a uniform tensor-product grid resulting in a system matrix whose action on a vector can be computed via the fast Fourier transform. The GMRES iterative solver is used to solve the discretized set of equations and numerical examples, illustrating surface plasmon propagation, are presented. The convergence rate of GMRES is discussed in terms of the spectrum of the system matrix and through numerical experiments we show how the eigenvalues of the discretized volume scattering operator are related to plasmon propagation and the medium parameters of a metallic object.
Energy Technology Data Exchange (ETDEWEB)
Allen, B J
1979-02-01
This documentation describes the PIES Integrating Model as it existed on January 1, 1978. This Volume VI of six volumes is data documentation, containing the standard table data used for the Administrator's Report at the beginning of 1978, along with the primary data sources and the office responsible. It also contains a copy of a PIES Integrating Model Report with a description of its content. Following an overview chapter, Chapter II, Supply and Demand Data Tables and Sources for the Mid-range Scenario for Target Years 1985 and 1990, data on demand, price, and elasticity; coal; imports; oil and gas; refineries; synthetics, shale, and solar/geothermal; transportation; and utilities are presented. The following data on alternate scenarios are discussed: low and high demand; low and high oil and gas supply; refinery and oil and gas data assuming a 5% annual increase in real world oil prices. Chapter IV describes the solution output obtained from an execution of PIES.
Sayed, Sadeed Bin
2016-11-02
An explicit marching on-in-time scheme for analyzing transient electromagnetic wave interactions on ferromagnetic scatterers is described. The proposed method solves a coupled system of time domain magnetic field volume integral and Landau-Lifshitz-Gilbert (LLG) equations. The unknown fluxes and fields are discretized using full and half Schaubert-Wilton-Glisson functions in space and bandlimited temporal interpolation functions in time. The coupled system is cast in the form of an ordinary differential equation and integrated in time using a PE(CE)m type linear multistep method to obtain the unknown expansion coefficients. Numerical results demonstrating the stability and accuracy of the proposed scheme are presented.
Energy Technology Data Exchange (ETDEWEB)
Allen, B J
1979-02-01
This documentation describes the PIES Integrating Model as it existed on January 1, 1978. This volume contains two chapters. In Chapter I, Overview, the following subjects are briefly described: supply data, EIA projection series and scenarios, demand data and assumptions, and supply assumptions - oil and gas availabilities. Chapter II contains supply and demand data tables and sources used by the PIES Integrating Model for the mid-range scenario target years 1985 and 1990. Tabulated information is presented for demand, price, and elasticity data; coal data; imports data; oil and gas data; refineries data; synthetics, shale, and solar/geothermal data; transportation data; and utilities data.
Mixed waste focus area integrated technical baseline report. Phase I, Volume 2: Revision 0
Energy Technology Data Exchange (ETDEWEB)
NONE
1996-01-16
This document (Volume 2) contains the Appendices A through J for the Mixed Waste Focus Area Integrated Technical Baseline Report Phase I for the Idaho National Engineering Laboratory. Included are: Waste Type Managers` Resumes, detailed information on wastewater, combustible organics, debris, unique waste, and inorganic homogeneous solids and soils, and waste data information. A detailed list of technology deficiencies and site needs identification is also provided.
IEA Wind Task 24 Integration of Wind and Hydropower Systems; Volume 2: Participant Case Studies
Energy Technology Data Exchange (ETDEWEB)
Acker, T.
2011-12-01
This report describes the background, concepts, issues and conclusions related to the feasibility of integrating wind and hydropower, as investigated by the members of IEA Wind Task 24. It is the result of a four-year effort involving seven IEA member countries and thirteen participating organizations. The companion report, Volume 2, describes in detail the study methodologies and participant case studies, and exists as a reference for this report.
Reactions of the students to integral volume problems and socio–psycho–mathematical relationship
Directory of Open Access Journals (Sweden)
Ergene Özkan
2016-01-01
Full Text Available In this research; how the changes in reactions which university students give integral volume problems before solution and after solution affect the solution processes is inspected. In the study adopting qualitative paradigm’s interpretive approach, case study is used as study design. Participants of the research are the 142 students which had been chosen from four different faculties of two universities in Istanbul, using nonprobability sampling. Semi-structured interviews were conducted with two students randomly chosen from every department and Integral Volume Pre Solution Test and Integral Volume Solution and After Solution Test were used as data collection tools. The data have been analyzed using descriptive analysis and presented by frequency and percentage tables. As a result of the research, it is concluded that the reactions of the students in the faculty, their familiarity to the mathematical statement and their attitude towards the problem and faculty based institutional differences such as professors, professional expectation causes the evolution of the socio-psycho-mathematical relationship between university students and problems and that affects the solution processes.
Directory of Open Access Journals (Sweden)
Yu Zhang
Full Text Available The aim of the study was to evaluate the value of assessing white matter integrity using diffusion tensor imaging (DTI for classification of mild cognitive impairment (MCI and prediction of cognitive impairments in comparison to brain atrophy measurements using structural MRI. Fifty-one patients with MCI and 66 cognitive normal controls (CN underwent DTI and T1-weighted structural MRI. DTI measures included fractional anisotropy (FA and radial diffusivity (DR from 20 predetermined regions-of-interest (ROIs in the commissural, limbic and association tracts, which are thought to be involved in Alzheimer's disease; measures of regional gray matter (GM volume included 21 ROIs in medial temporal lobe, parietal cortex, and subcortical regions. Significant group differences between MCI and CN were detected by each MRI modality: In particular, reduced FA was found in splenium, left isthmus cingulum and fornix; increased DR was found in splenium, left isthmus cingulum and bilateral uncinate fasciculi; reduced GM volume was found in bilateral hippocampi, left entorhinal cortex, right amygdala and bilateral thalamus; and thinner cortex was found in the left entorhinal cortex. Group classifications based on FA or DR was significant and better than classifications based on GM volume. Using either DR or FA together with GM volume improved classification accuracy. Furthermore, all three measures, FA, DR and GM volume were similarly accurate in predicting cognitive performance in MCI patients. Taken together, the results imply that DTI measures are as accurate as measures of GM volume in detecting brain alterations that are associated with cognitive impairment. Furthermore, a combination of DTI and structural MRI measurements improves classification accuracy.
DNFSB recommendation 94-1 Hanford site integrated stabilization management plan - VOLUMES 1-3
Energy Technology Data Exchange (ETDEWEB)
Gerber, E.W.
1996-09-23
The US Department of Energy (DOE) has developed an Integrated Program Plan (IPP) to address concerns identified in Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 94-1. The IPP describes the actions that DOE plans to implement at its various sites to convert excess fissile materials to forms or conditions suitable for safe interim storage. The baseline IPP was issued as DOE's DNFSB Recommendation 94-1 Implementation Plan (IP), which was transmitted to the DNFSB on February 28, 1995. The IPP was subsequently supplemented with an Integrated Facilities Plan and a Research and Development Plan, which further develop complex-wide research and development and long-range facility requirements and plans. These additions to the baseline IPP were developed based on a systems engineering approach that integrated facilities and capabilities at the various DOE sites and focused on attaining safe interim storage with minimum safety risks and environmental impacts. Each affected DOE site has developed a Site Integrated Stabilization Management Plan (SISMP) to identify individual site plans to implement the DNFSB Recommendation 94-1 IPP. The SISMPs were developed based on the objectives, requirements, and commitments identified in the DNFSB Recommendation 94-1 IP. The SISMPs supported formulation of the initial versions of the Integrated Facilities Plan and the Research and Development Plan. The SISMPs are periodically updated to reflect improved integration between DOE sites as identified during the IPP systems engineering evaluations. This document constitutes the Hanford SISMP. This document includes the planned work scope, costs and schedules for activities at the Hanford site to implement the DNFSB Recommendation 94-1 IPP.
Cwik, T.; Jamnejad, V.; Zuffada, C.
1993-01-01
It is often desirable to calculate the electromagnetic fields inside and about a complicated system of scattering bodies, as well as in their far-field region. The finite element method (FE) is well suited to solving the interior problem, but the domain has to be limited to a manageable size. At the truncation of the FE mesh one can either impose approximate (absorbing) boundary conditions or set up an integral equation (IE) for the fields scattered from the bodies. The latter approach is preferable since it results in higher accuracy. Hence, the two techniques can be successfully combined by introducing a surface that encloses the scatterers, applying a FE model to the inner volume and setting up an IE for the tangential fields components on the surface. Here the continuity of the tangential fields is used bo obtain a consistent solution. A few coupled FE-IE methods have recently appeared in the literature. The approach presented here has the advantage of using edge-based finite elements, a type of finite elements with degrees of freedom associated with edges of the mesh. Because of their properties, they are better suited than the conventional node based elements to represent electromagnetic fields, particularly when inhomogeneous regions are modeled, since the node based elements impose an unnatural continuity of all field components across boundaries of mesh elements. Additionally, our approach is well suited to handle large size problems and lends itself to code parallelization. We will discuss the salient features that make our approach very efficient from the standpoint of numerical computation, and the fields and RCS of a few objects are illustrated as examples.
This study presents the integrated volume method for estimating saturation pressure and enthalpy of vaporization of a whole aerosol distribution. We measure the change of total volume of an aerosol distribution between a reference state and several heated states, with the heating...
Houbec, Keith; Tillman, Barry; Connolly, Janis
2010-01-01
For decades, Space Life Sciences and NASA as an Agency have considered NASA-STD-3000, Man-Systems Integration Standards, a significant contribution to human spaceflight programs and to human-systems integration in general. The document has been referenced in numerous design standards both within NASA and by organizations throughout the world. With research program and project results being realized, advances in technology and new information in a variety of topic areas now available, the time arrived to update this extensive suite of requirements and design information. During the past several years, a multi-NASA center effort has been underway to write the update to NASA-STD-3000 with standards and design guidance that would be applicable to all future human spaceflight programs. NASA-STD-3001 - Volumes 1 and 2 - and the Human Integration Design Handbook (HIDH) were created. Volume 1, Crew Health, establishes NASA s spaceflight crew health standards for the pre-flight, in-flight, and post-flight phases of human spaceflight. Volume 2, Human Factors, Habitability and Environmental Health, focuses on the requirements of human-system integration and how the human crew interacts with other systems, and how the human and the system function together to accomplish the tasks for mission success. The HIDH is a compendium of human spaceflight history and knowledge, and provides useful background information and research findings. And as the HIDH is a stand-alone companion to the Standards, the maintenance of the document has been streamlined. This unique and flexible approach ensures that the content is current and addresses the fundamental advances of human performance and human capabilities and constraints research. Current work focuses on the development of new sections of Volume 2 and collecting updates to the HIDH. The new sections in development expand the scope of the standard and address mission operations and support operations. This effort is again collaboration
Al Jarro, Ahmed
2012-11-01
An explicit marching-on-in-time (MOT) scheme for solving the time domain volume integral equation is presented. The proposed method achieves its stability by employing, at each time step, a corrector scheme, which updates/corrects fields computed by the explicit predictor scheme. The proposedmethod is computationally more efficient when compared to the existing filtering techniques used for the stabilization of explicit MOT schemes. Numerical results presented in this paper demonstrate that the proposed method maintains its stability even when applied to the analysis of electromagnetic wave interactions with electrically large structures meshed using approximately half a million discretization elements.
An efficient explicit marching on in time solver for magnetic field volume integral equation
Sayed, Sadeed Bin
2015-07-25
An efficient explicit marching on in time (MOT) scheme for solving the magnetic field volume integral equation is proposed. The MOT system is cast in the form of an ordinary differential equation and is integrated in time using a PE(CE)m multistep scheme. At each time step, a system with a Gram matrix is solved for the predicted/corrected field expansion coefficients. Depending on the type of spatial testing scheme Gram matrix is sparse or consists of blocks with only diagonal entries regardless of the time step size. Consequently, the resulting MOT scheme is more efficient than its implicit counterparts, which call for inversion of fuller matrix system at lower frequencies. Numerical results, which demonstrate the efficiency, accuracy, and stability of the proposed MOT scheme, are presented.
Directory of Open Access Journals (Sweden)
Aldawsari HM
2015-01-01
Full Text Available Hibah M Aldawsari,1 Shaimaa M Badr-Eldin,1,2 Gihan S Labib,1,3 Amal H El-Kamel3 1Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, King Abdulaziz University, Jeddah, Saudi Arabia; 2Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Cairo University, Cairo, Egypt; 3Department of Pharmaceutics, Faculty of Pharmacy, Alexandria University, Alexandria, Egypt Abstract: Lemongrass oil (LGO is a volatile oil extracted from the leaves of Cymbopogon citratus that has become one of the most important natural oils in the pharmaceutical industry because of its diverse pharmacologic and clinical effects. However, LGO suffers from low aqueous solubility, which could lead to a reduced effect. Moreover, the instability of its major active constituent, citral, could lead to volatilization, reaction with other formulation ingredients, and consequently, skin irritation. To surmount these problems, this research aims to formulate lemongrass-loaded ethyl cellulose nanosponges with a topical hydrogel with an enhanced antifungal effect and decreased irritation. The minimal inhibitory concentration and minimal fungicidal concentration of LGO against Candida albicans strain ATC 100231, determined using the broth macrodilution method, were found to be 2 and 8 µL/mL, respectively. The emulsion solvent evaporation technique was used for the preparation of the nanosponges. The nanosponge dispersions were then integrated into carbopol hydrogels (0.4%. Nine formulations were prepared based on a 32 full factorial design employing the ethyl cellulose:polyvinyl alcohol ratio and stirring rate as independent variables. The prepared formulations were evaluated for particle size, citral content, and in vitro release. Results revealed that all the nanosponge dispersions were nanosized, with satisfactory citral content and sustained release profiles. Statistical analysis revealed that both ethyl cellulose:polyvinyl alcohol ratio and
Hemorrhagic shock impairs myocardial cell volume regulation and membrane integrity in dogs
Energy Technology Data Exchange (ETDEWEB)
Horton, J.W.
1987-06-01
An in vitro myocardial slice technique was used to quantitate alterations in cell volume regulation and membrane integrity after 2 h or hemorrhagic shock. After in vitro incubation in Krebs-Ringer-phosphate medium containing trace (/sup 14/C)inulin, values (ml H/sub 2/O/g dry wt) for control nonshocked myocardial slices were 4.03 /plus minus/ 0.11 (SE) for total water, 2.16 /plus minus/ 0.07 for inulin impermeable space, and 1.76 /plus minus/ 0.15 for inulin diffusible space. Shocked myocardial slices showed impaired response to cold incubation. After 2 h of in vivo shock, total tissue water, inulin diffusible space, and inulin impermeable space increased significantly for subendocardium, whereas changes in subepicardium parameters were minimal. Shock-induced cellular swelling was accompanied by an increased total tissue sodium, but no change in tissue potassium. Calcium entry blockade in vivo significantly reduced subendocardial total tissue water as compared with shock-untreated dogs. In addition, calcium entry blockade reduced shock-induced increases in inulin diffusible space. In vitro myocardial slice studies confirm alterations in subendocardial membrane integrity after 2 h of in vivo hemorrhagic shock. Shock-induced abnormalities in myocardial cell volume regulation are reduced by calcium entry blockade in vivo.
Gomez-Sousa, Hipolito; Martinez-Lorenzo, Jose Angel; Arias-Acuña, Marcos
2015-01-01
This paper presents a new method, based on the well-known method of moments (MoM), for the numerical electromagnetic analysis of scattering and radiation from metallic or dielectric structures, or both structure types in the same simulation, that are in contact with other metallic or dielectric structures. The proposed method for solving the MoM junction problem consists of two separate algorithms, one of which comprises a generalization for bodies in contact of the surface integral equation (SIE) formulations. Unlike some other published SIE generalizations in the field of computational electromagnetics, this generalization does not require duplicating unknowns on the dielectric separation surfaces. Additionally, this generalization is applicable to any ordinary single-scatterer SIE formulations employed as baseline. The other algorithm deals with enforcing boundary conditions and Kirchhoff's Law, relating the surface current flow across a junction edge. Two important features inherent to this latter algorit...
Chaskopoulou, Alexandra; Latham, Mark D; Pereira, Roberto M; Koehler, Philip G
2013-06-01
We estimated the diameters below which 50% and 90% of the volume of droplets exist (Dv50 and Dv90, respectively) of 1 oil-based (Permanone 30-30) and 2 water-based (AquaReslin, Aqua-K-Othrine) antievaporant aerosols (with the Film Forming Aqueous Spray Technology [FFAST]) using Teflon- and magnesium oxide (MgO)-coated slides and determined whether the aging of the droplets on the slides (up to 60 min) exhibited any significant effect on Dv50 and Dv90 calculations. There were no significant differences in either Dv50 or Dv90 estimates on MgO-coated slides at 0 min and 60 min for all 3 products tested. On Teflon-coated slides, the only product that showed significant difference between 0 min and 60 min in both Dv50 and Dv90 estimates was Aqua-K-Othrine, perhaps due to a difference in formulation components. Specifically, both values corresponding to Dv50 and Dv90 at 60 min decreased by approximately 50% when compared to the values at 0 min. For the other 2 products, AquaReslin and Permanone, aging of droplets on Teflon up to 60 min did not have any significant effect on Dv50 and Dv90 values. To further investigate the behavior of Aqua-K-Othrine droplets on Teflon-coated slides we observed the droplets immediately after spraying and at 10-min intervals under different conditions of temperature and humidity. The majority of the shrinkage occurred within the 1st 10 min after impaction on the slides under all conditions tested. So in most field situations where slides are read several hours or days after collection, this shrinkage would not be observed. The MgO-coated slides should be the preferred field method for sampling droplets of Aqua-K-Othirne with the FFAST antievaporant technology.
Four formulations of noncommutative quantum mechanics
Gouba, Laure
2016-01-01
Four formulations of noncommutative quantum mechanics are reviewed. These are the canonical, path-integral, Weyl-Wigner and systematic formulations. The four formulations are charaterized by a deformed Heisenberg algebra but differ in mathematical and conceptual overview.
Directory of Open Access Journals (Sweden)
Kanittha Yimnak
2014-01-01
Full Text Available The meshless local Pretrov-Galerkin method (MLPG with the test function in view of the Heaviside step function is introduced to solve the system of coupled nonlinear reaction-diffusion equations in two-dimensional spaces subjected to Dirichlet and Neumann boundary conditions on a square domain. Two-field velocities are approximated by moving Kriging (MK interpolation method for constructing nodal shape function which holds the Kronecker delta property, thereby enhancing the arrangement nodal shape construction accuracy, while the Crank-Nicolson method is chosen for temporal discretization. The nonlinear terms are treated iteratively within each time step. The developed formulation is verified in two numerical examples with investigating the convergence and the accuracy of numerical results. The numerical experiments revealing the solutions by the developed formulation are stable and more precise.
Energy Technology Data Exchange (ETDEWEB)
Ormsby, L. S.; Sawyer, T. G.; Brown, Dr., M. L.; Daviet, II, L. L; Weber, E. R.; Brown, J. E.; Arlidge, J. W.; Novak, H. R.; Sanesi, Norman; Klaiman, H. C.; Spangenberg, Jr., D. T.; Groves, D. J.; Maddox, J. D.; Hayslip, R. M.; Ijams, G.; Lacy, R. G.; Montgomery, J.; Carito, J. A.; Ballance, J. W.; Bluemle, C. F.; Smith, D. N.; Wehrey, M. C.; Ladd, K. L.; Evans, Dr., S. K.; Guild, D. H.; Brodfeld, B.; Cleveland, J. A.; Hicks, K. L.; Noga, M. W.; Ross, A. M.
1979-12-01
The purpose of this project is to provide information to DOE which can be used to establish its plans for accelerated commercialization and market penetration of solar electric generating plants in the southwestern region of the United States. The area of interest includes Arizona, California, Colorado, Nevada, New Mexico, Utah, and sections of Oklahoma and Texas. The system integration study establishes the investment that utilities could afford to make in solar thermal, photovoltaic, and wind energy systems, and to assess the sensitivity of the break-even cost to critical variables including fuel escalation rates, fixed charge rates, load growth rates, cloud cover, number of sites, load shape, and energy storage. This information will be used as input to Volume IV, Institutional Studies, one objective of which will be to determine the incentives required to close the gap between the break-even investment for the utilities of the Southwest and the estimated cost of solar generation.
First large volume characterization of the QIE10/11 custom front-end integrated circuits
Hare, D.; Baumbaugh, A.; Dal Monte, L.; Freeman, J.; Hirschauer, J.; Hughes, E.; Roy, T.; Whitbeck, A.; Yumiceva, F.; Zimmerman, T.
2016-02-01
The CMS experiment at the CERN Large Hadron Collider (LHC) will upgrade the photon detection and readout systems of its barrel and endcap hadron calorimeters (HCAL) through the second long shutdown of the LHC in 2018. A central feature of this upgrade is the development of two new versions of the QIE (Charge Integrator and Encoder), a Fermilab-designed custom ASIC for measurement of charge from detectors in high-rate environments. These most recent additions to the QIE family feature 17-bits of dynamic range with 1% digitization precision for high charge and a time-to-digital converter (TDC) with half nanosecond resolution all with 16 bits of readout per bunch crossing. For the first time, the CMS experiment has produced and characterized in great detail a large volume of chips. The characteristics and performance of the new QIE and their related chip-to-chip variations as measured in a sample of 10,000 chips is described.
Parallel, explicit, and PWTD-enhanced time domain volume integral equation solver
Liu, Yang
2013-07-01
Time domain volume integral equations (TDVIEs) are useful for analyzing transient scattering from inhomogeneous dielectric objects in applications as varied as photonics, optoelectronics, and bioelectromagnetics. TDVIEs typically are solved by implicit marching-on-in-time (MOT) schemes [N. T. Gres et al., Radio Sci., 36, 379-386, 2001], requiring the solution of a system of equations at each and every time step. To reduce the computational cost associated with such schemes, [A. Al-Jarro et al., IEEE Trans. Antennas Propagat., 60, 5203-5215, 2012] introduced an explicit MOT-TDVIE method that uses a predictor-corrector technique to stably update field values throughout the scatterer. By leveraging memory-efficient nodal spatial discretization and scalable parallelization schemes [A. Al-Jarro et al., in 28th Int. Rev. Progress Appl. Computat. Electromagn., 2012], this solver has been successfully applied to the analysis of scattering phenomena involving 0.5 million spatial unknowns. © 2013 IEEE.
OTEC platform configuration and integration. Volume II. Technical concept. Final report
Energy Technology Data Exchange (ETDEWEB)
None
1978-07-07
The configuration, integration, and evaluation studies performed in the first phase of this contract resulted in a ranking of the most feasible platform candidates for commercial OTEC applications. On the basis of the results obtained from three individual contractors performing the same study, the Department of Energy made selections of two platform hulls for each contractor for conceptual designs. For Phase-II studies, M. Rosenblatt and Son, Inc. (MR and S) project team was given the SPAR and SPHERE platforms to perform not only conceptual designs for, but also cost and time schedules and sensitivity analyses. This is the second volume of a three-volume MR and S report, and it presents the results of conceptual designs for the two platforms, the facilities and equipment required for construction, deployment, and operation of these platforms, and cost estimates and time schedules. All conceptual design work is performed for the baseline site on West Coast of Florida. The cost differentials and other considerations involved with deploying the platforms in the New Orleans and Puerto Rico sites are also presented. As an end product of the complete study, the costs for the SPAR and the SPHERE platforms are reported both in terms of acquisition costs in 1978 dollars and life cycle costs in dollars per kilowatt.
Kim, Jin-Young; Chang, Soo-Ik; Andrew J deMello; O’Hare, Danny
2014-01-01
In this paper, a porous polymer nanostructure has been integrated with droplet-based microfluidics in a single planar format. Monolithic porous polymer (MPP) was formed selectively within a microfluidic channel. The resulting analyte bands were sequentially comartmentalised into droplets. This device reduces band broadening and the effects of post-column dead volume by the combination of the two techniques. Moreover it offers the precise control of nano/picoliter volume samples.
Homentcovschi, Dorel
2008-01-01
This paper gives a regular vector boundary integral equation for solving the problem of viscous scattering of a pressure wave by a rigid body. Firstly, single-layer viscous potentials and a generalized stress tensor are introduced. Correspondingly, generalized viscous double-layer potentials are defined. By representing the scattered field as a combination of a single-layer viscous potential and a generalized viscous double-layer potential, the problem is reduced to the solution of a vectorial Fredholm integral equation of the second kind. Generally, the vector integral equation is singular. However, there is a particular stress tensor, called pseudostress, which yields a regular integral equation. In this case, the Fredholm alternative applies and permits a direct proof of the existence and uniqueness of the solution. The results presented here provide the foundation for a numerical solution procedure. PMID:19865494
FY 1996 solid waste integrated life-cycle forecast container summary volume 1 and 2
Energy Technology Data Exchange (ETDEWEB)
Valero, O.J.
1996-04-23
For the past six years, a waste volume forecast has been collected annually from onsite and offsite generators that currently ship or are planning to ship solid waste to the Westinghouse Hanford Company`s Central Waste Complex (CWC). This document provides a description of the containers expected to be used for these waste shipments from 1996 through the remaining life cycle of the Hanford Site. In previous years, forecast data have been reported for a 30-year time period; however, the life-cycle approach was adopted this year to maintain consistency with FY 1996 Multi-Year Program Plans. This document is a companion report to the more detailed report on waste volumes: WHC-EP0900, FY 1996 Solid Waste Integrated Life-Cycle Forecast Volume Summary. Both of these documents are based on data gathered during the FY 1995 data call and verified as of January, 1996. These documents are intended to be used in conjunction with other solid waste planning documents as references for short and long-term planning of the WHC Solid Waste Disposal Division`s treatment, storage, and disposal activities over the next several decades. This document focuses on the types of containers that will be used for packaging low-level mixed waste (LLMW) and transuranic waste (both non-mixed and mixed) (TRU(M)). The major waste generators for each waste category and container type are also discussed. Containers used for low-level waste (LLW) are described in Appendix A, since LLW requires minimal treatment and storage prior to onsite disposal in the LLW burial grounds. The FY 1996 forecast data indicate that about 100,900 cubic meters of LLMW and TRU(M) waste are expected to be received at the CWC over the remaining life cycle of the site. Based on ranges provided by the waste generators, this baseline volume could fluctuate between a minimum of about 59,720 cubic meters and a maximum of about 152,170 cubic meters.
Directory of Open Access Journals (Sweden)
Baranovskaya T. P.
2014-06-01
Full Text Available The article suggests a mathematical model of optimization of the volume of material flows: the model for the ideal conditions; the model for the working conditions; generalized model of determining the optimal input parameters. These models optimize such parameters of inventory management in technology-integrated grain production systems, as the number of cycles supply, the volume of the source material and financial flows. The study was carried out on the example of the integrated system of production, processing and sales of wheat (bread with the full technological cycle
A Time Marching Scheme for Solving Volume Integral Equations on Nonlinear Scatterers
Bagci, Hakan
2015-01-07
Transient electromagnetic field interactions on inhomogeneous penetrable scatterers can be analyzed by solving time domain volume integral equations (TDVIEs). TDVIEs are oftentimes solved using marchingon-in-time (MOT) schemes. Unlike finite difference and finite element schemes, MOT-TDVIE solvers require discretization of only the scatterers, do not call for artificial absorbing boundary conditions, and are more robust to numerical phase dispersion. On the other hand, their computational cost is high, they suffer from late-time instabilities, and their implicit nature makes incorporation of nonlinear constitutive relations more difficult. Development of plane-wave time-domain (PWTD) and FFT-based schemes has significantly reduced the computational cost of the MOT-TDVIE solvers. Additionally, latetime instability problem has been alleviated for all practical purposes with the development of accurate integration schemes and specially designed temporal basis functions. Addressing the third challenge is the topic of this presentation. I will talk about an explicit MOT scheme developed for solving the TDVIE on scatterers with nonlinear material properties. The proposed scheme separately discretizes the TDVIE and the nonlinear constitutive relation between electric field intensity and flux density. The unknown field intensity and flux density are expanded using half and full Schaubert-Wilton-Glisson (SWG) basis functions in space and polynomial temporal interpolators in time. The resulting coupled system of the discretized TDVIE and constitutive relation is integrated in time using an explicit P E(CE) m scheme to yield the unknown expansion coefficients. Explicitness of time marching allows for straightforward incorporation of the nonlinearity as a function evaluation on the right hand side of the coupled system of equations. Consequently, the resulting MOT scheme does not call for a Newton-like nonlinear solver. Numerical examples, which demonstrate the applicability
Morris, Mohy G
2010-02-28
With the rapid somatic growth and development in infants, simultaneous accurate measurements of lung volume and airway function are essential. Raised volume rapid thoracoabdominal compression (RTC) is widely used to generate forced expiration from an airway opening pressure of 30 cmH(2)O (V(30)). The (dynamic) functional residual capacity (FRC(dyn)) remains the lung volume most routinely measured. The aim of this study was to develop comprehensive integrated spirometry that included all subdivisions of lung volume at V(30) or total lung capacity (TLC(30)). Measurements were performed on 17 healthy infants aged 8.6-119.7 weeks. A commercial system for multiple-breath nitrogen washout (MBNW) to measure lung volumes and a custom made system to perform RTC were used in unison. A refined automated raised volume RTC and the following two novel single maneuvers with dual volume measurements were performed from V(30) during a brief post-hyperventilation apneic pause: (1) the passive expiratory flow was integrated to produce the inspiratory capacity (IC) and the static (passive) FRC (FRC(st)) was estimated by initiating MBNW after end-passive expiration; (2) RTC was initiated late during passive expiration, flow was integrated to produce the slow vital capacity ((j)SVC) and the residual volume (RV) was measured by initiating MBNW after end-expiration while the jacket (j) was inflated. Intrasubject FRC(dyn) and FRC(st) measurements overlapped (p=0.6420) but neither did with the RV (pvital capacity and tidal volume were 21.2 (19.7-22.7), 36.7 (33.0-40.4), 21.2 (19.6-22.8), 40.7 (37.2-44.2), 18.1 (16.6-19.7), 40.7 (37.1-44.2) and 10.2 (9.6-10.7)ml/kg, respectively. Static lung volumes and capacities at V(30) and variables from the best forced expiratory flow-volume curve were dependent on age, body length and weight. In conclusion, we developed a comprehensive physiologically integrated approach for in-depth investigation of lung function at V(30) in infants.
Chen, Chieh-Fan; Ho, Wen-Hsien; Chou, Huei-Yin; Yang, Shu-Mei; Chen, I-Te; Shi, Hon-Yi
2011-01-01
This study analyzed meteorological, clinical and economic factors in terms of their effects on monthly ED revenue and visitor volume. Monthly data from January 1, 2005 to September 30, 2009 were analyzed. Spearman correlation and cross-correlation analyses were performed to identify the correlation between each independent variable, ED revenue, and visitor volume. Autoregressive integrated moving average (ARIMA) model was used to quantify the relationship between each independent variable, ED revenue, and visitor volume. The accuracies were evaluated by comparing model forecasts to actual values with mean absolute percentage of error. Sensitivity of prediction errors to model training time was also evaluated. The ARIMA models indicated that mean maximum temperature, relative humidity, rainfall, non-trauma, and trauma visits may correlate positively with ED revenue, but mean minimum temperature may correlate negatively with ED revenue. Moreover, mean minimum temperature and stock market index fluctuation may correlate positively with trauma visitor volume. Mean maximum temperature, relative humidity and stock market index fluctuation may correlate positively with non-trauma visitor volume. Mean maximum temperature and relative humidity may correlate positively with pediatric visitor volume, but mean minimum temperature may correlate negatively with pediatric visitor volume. The model also performed well in forecasting revenue and visitor volume.
Directory of Open Access Journals (Sweden)
Chieh-Fan Chen
2011-01-01
Full Text Available This study analyzed meteorological, clinical and economic factors in terms of their effects on monthly ED revenue and visitor volume. Monthly data from January 1, 2005 to September 30, 2009 were analyzed. Spearman correlation and cross-correlation analyses were performed to identify the correlation between each independent variable, ED revenue, and visitor volume. Autoregressive integrated moving average (ARIMA model was used to quantify the relationship between each independent variable, ED revenue, and visitor volume. The accuracies were evaluated by comparing model forecasts to actual values with mean absolute percentage of error. Sensitivity of prediction errors to model training time was also evaluated. The ARIMA models indicated that mean maximum temperature, relative humidity, rainfall, non-trauma, and trauma visits may correlate positively with ED revenue, but mean minimum temperature may correlate negatively with ED revenue. Moreover, mean minimum temperature and stock market index fluctuation may correlate positively with trauma visitor volume. Mean maximum temperature, relative humidity and stock market index fluctuation may correlate positively with non-trauma visitor volume. Mean maximum temperature and relative humidity may correlate positively with pediatric visitor volume, but mean minimum temperature may correlate negatively with pediatric visitor volume. The model also performed well in forecasting revenue and visitor volume.
Ho, Hsuan-Fu; Hung, Chia-Chi
2008-01-01
Purpose: The purpose of this paper is to examine how a graduate institute at National Chiayi University (NCYU), by using a model that integrates analytic hierarchy process, cluster analysis and correspondence analysis, can develop effective marketing strategies. Design/methodology/approach: This is primarily a quantitative study aimed at…
Ho, Hsuan-Fu; Hung, Chia-Chi
2008-01-01
Purpose: The purpose of this paper is to examine how a graduate institute at National Chiayi University (NCYU), by using a model that integrates analytic hierarchy process, cluster analysis and correspondence analysis, can develop effective marketing strategies. Design/methodology/approach: This is primarily a quantitative study aimed at…
Ulku, Huseyin Arda
2014-07-06
Effects of material nonlinearities on electromagnetic field interactions become dominant as field amplitudes increase. A typical example is observed in plasmonics, where highly localized fields “activate” Kerr nonlinearities. Naturally, time domain solvers are the method of choice when it comes simulating these nonlinear effects. Oftentimes, finite difference time domain (FDTD) method is used for this purpose. This is simply due to the fact that explicitness of the FDTD renders the implementation easier and the material nonlinearity can be easily accounted for using an auxiliary differential equation (J.H. Green and A. Taflove, Opt. Express, 14(18), 8305-8310, 2006). On the other hand, explicit marching on-in-time (MOT)-based time domain integral equation (TDIE) solvers have never been used for the same purpose even though they offer several advantages over FDTD (E. Michielssen, et al., ECCOMAS CFD, The Netherlands, Sep. 5-8, 2006). This is because explicit MOT solvers have never been stabilized until not so long ago. Recently an explicit but stable MOT scheme has been proposed for solving the time domain surface magnetic field integral equation (H.A. Ulku, et al., IEEE Trans. Antennas Propag., 61(8), 4120-4131, 2013) and later it has been extended for the time domain volume electric field integral equation (TDVEFIE) (S. B. Sayed, et al., Pr. Electromagn. Res. S., 378, Stockholm, 2013). This explicit MOT scheme uses predictor-corrector updates together with successive over relaxation during time marching to stabilize the solution even when time step is as large as in the implicit counterpart. In this work, an explicit MOT-TDVEFIE solver is proposed for analyzing electromagnetic wave interactions on scatterers exhibiting Kerr nonlinearity. Nonlinearity is accounted for using the constitutive relation between the electric field intensity and flux density. Then, this relation and the TDVEFIE are discretized together by expanding the intensity and flux - sing half
Wang, Yongming; Zou, Zhiling; Song, Hongwen; Xu, Xiaodan; Wang, Huijun; d'Oleire Uquillas, Federico; Huang, Xiting
2016-01-01
Mobile phone dependence (MPD) is a behavioral addiction that has become an increasing public mental health issue. While previous research has explored some of the factors that may predict MPD, the underlying neural mechanisms of MPD have not been investigated yet. The current study aimed to explore the microstructural variations associated with MPD as measured with functional Magnetic Resonance Imaging (fMRI). Gray matter volume (GMV) and white matter (WM) integrity [four indices: fractional anisotropy (FA); mean diffusivity (MD); axial diffusivity (AD); and radial diffusivity (RD)] were calculated via voxel-based morphometry (VBM) and tract-based spatial statistics (TBSS) analysis, respectively. Sixty-eight college students (42 female) were enrolled and separated into two groups [MPD group, N = 34; control group (CG), N = 34] based on Mobile Phone Addiction Index (MPAI) scale score. Trait impulsivity was also measured using the Barratt Impulsiveness Scale (BIS-11). In light of underlying trait impulsivity, results revealed decreased GMV in the MPD group relative to controls in regions such as the right superior frontal gyrus (sFG), right inferior frontal gyrus (iFG), and bilateral thalamus (Thal). In the MPD group, GMV in the above mentioned regions was negatively correlated with scores on the MPAI. Results also showed significantly less FA and AD measures of WM integrity in the MPD group relative to controls in bilateral hippocampal cingulum bundle fibers (CgH). Additionally, in the MPD group, FA of the CgH was also negatively correlated with scores on the MPAI. These findings provide the first morphological evidence of altered brain structure with mobile phone overuse, and may help to better understand the neural mechanisms of MPD in relation to other behavioral and substance addiction disorders.
Directory of Open Access Journals (Sweden)
Yongming eWang
2016-05-01
Full Text Available Mobile phone dependence (MPD is a behavioral addiction that has become an increasing public mental health issue. While previous research has explored some of the factors that may predict MPD, the underlying neural mechanisms of MPD have not been investigated yet. The current study aimed to explore the microstructural variations associated with MPD as measured with functional Magnetic Resonance Imaging (fMRI. Gray matter volume (GMV and white matter (WM integrity (four indexes: fractional anisotropy, FA; mean diffusivity, MD; axial diffusivity, AD; and radial diffusivity, RD were calculated via voxel-based morphometry (VBM and tract-based spatial statistics (TBSS analysis, respectively. Sixty-eight college students (42 female were enrolled and separated into two groups (MPD group, N=34; control group, N=34 based on Mobile Phone Addiction Index (MPAI scale score. Trait impulsivity was also measured using the Barrett Impulsivity Scale (BIS-11. In light of underlying trait impulsivity, results revealed decreased GMV in the MPD group relative to controls in regions such as the right superior frontal gyrus (sFG, right inferior frontal gyrus (iFG, and bilateral thalamus (Thal. In the MPD group, GMV in the above mentioned regions was negatively correlated with scores on the MPAI. Results also showed significantly less FA and AD measures of white matter integrity in the MPD group relative to controls in bilateral hippocampal cingulum bundle fibers (CgH. Additionally, in the MPD group, FA of the CgH was also negatively correlated with scores on the MPAI. These findings provide the first morphological evidence of altered brain structure with phone-overuse, and may help to better understand the neural mechanisms of MPD in relation with other behavioral and substance addiction disorders.
CSIR Research Space (South Africa)
Lysko, AA
2008-07-01
Full Text Available z e z z u u ξ ξξ β α θ ξ ξ β α β α ′ + ′ ′ = = − − = − − ∫ � � � � � � Both closed forms for this integral (with exponents and sinuses) are numerically unstable (as 00 ) at angle θ equal 90 degrees and also for conical...
Cerebral blood volume affects blood–brain barrier integrity in an acute transient stroke model
Huang, Shuning; Kim, Jeong Kon; Atochin, Dmitriy N; Farrar, Christian T; Huang, Paul L; Suh, Ji Yeon; Kwon, Seon Joo; Shim, Woo Hyun; Cho, Hyungjoon; Cho, Gyunggoo; Kim, Young Ro
2013-01-01
Insufficient vascular reserve after an ischemic stroke may induce biochemical cascades that subsequently deteriorate the blood–brain barrier (BBB) function. However, the direct relationship between poor cerebral blood volume (CBV) restoration and BBB disruption has not been examined in acute stroke. To quantify BBB integrity at acute stages of transient stroke, in particular for cases in which extravasation of the standard contrast agent (Gd-DTPA) is not observed, we adopted the water exchange index (WEI), a novel magnetic resonance image-derived parameter to estimate the water permeability across the BBB. The apparent diffusion coefficient (ADC) and R2 relaxation rate constant were also measured for outlining the tissue abnormality, while fractional CBV and WEI were quantified for assessing vascular alterations. The significantly decreased ADC and R2 in the ischemic cortices did not correlate with the changes in CBV or WEI. In contrast, a strong negative correlation between the ipsilesional WEI and CBV was found, in which stroke mice were clustered into two groups: (1) high WEI and low CBV and (2) normal WEI and CBV. The low CBV observed for mice with a disrupted BBB, characterized by a high WEI, indicates the importance of CBV restoration for maintaining BBB stability in acute stroke. PMID:23462571
Soltanmoradi, Elmira; Shokri, Babak
2017-05-01
In this article, the electromagnetic wave scattering from plasma columns with inhomogeneous electron density distribution is studied by the Green's function volume integral equation method. Due to the ready production of such plasmas in the laboratories and their practical application in various technological fields, this study tries to find the effects of plasma parameters such as the electron density, radius, and pressure on the scattering cross-section of a plasma column. Moreover, the incident wave frequency influence of the scattering pattern is demonstrated. Furthermore, the scattering cross-section of a plasma column with an inhomogeneous collision frequency profile is calculated and the effect of this inhomogeneity is discussed first in this article. These results are especially used to determine the appropriate conditions for radar cross-section reduction purposes. It is shown that the radar cross-section of a plasma column reduces more for a larger collision frequency, for a relatively lower plasma frequency, and also for a smaller radius. Furthermore, it is found that the effect of the electron density on the scattering cross-section is more obvious in comparison with the effect of other plasma parameters. Also, the plasma column with homogenous collision frequency can be used as a better shielding in contrast to its inhomogeneous counterpart.
Liu, Yang
2016-03-25
A parallel plane-wave time-domain (PWTD)-accelerated explicit marching-on-in-time (MOT) scheme for solving the time domain electric field volume integral equation (TD-EFVIE) is presented. The proposed scheme leverages pulse functions and Lagrange polynomials to spatially and temporally discretize the electric flux density induced throughout the scatterers, and a finite difference scheme to compute the electric fields from the Hertz electric vector potentials radiated by the flux density. The flux density is explicitly updated during time marching by a predictor-corrector (PC) scheme and the vector potentials are efficiently computed by a scalar PWTD scheme. The memory requirement and computational complexity of the resulting explicit PWTD-PC-EFVIE solver scale as ( log ) s s O N N and ( ) s t O N N , respectively. Here, s N is the number of spatial basis functions and t N is the number of time steps. A scalable parallelization of the proposed MOT scheme on distributed- memory CPU clusters is described. The efficiency, accuracy, and applicability of the resulting (parallelized) PWTD-PC-EFVIE solver are demonstrated via its application to the analysis of transient electromagnetic wave interactions on canonical and real-life scatterers represented with up to 25 million spatial discretization elements.
Recent advances in marching-on-in-time schemes for solving time domain volume integral equations
Sayed, Sadeed Bin
2015-05-16
Transient electromagnetic field interactions on inhomogeneous penetrable scatterers can be analyzed by solving time domain volume integral equations (TDVIEs). TDVIEs are constructed by setting the summation of the incident and scattered field intensities to the total field intensity on the volumetric support of the scatterer. The unknown can be the field intensity or flux/current density. Representing the total field intensity in terms of the unknown using the relevant constitutive relation and the scattered field intensity in terms of the spatiotemporal convolution of the unknown with the Green function yield the final form of the TDVIE. The unknown is expanded in terms of local spatial and temporal basis functions. Inserting this expansion into the TDVIE and testing the resulting equation at discrete times yield a system of equations that is solved by the marching on-in-time (MOT) scheme. At each time step, a smaller system of equations, termed MOT system is solved for the coefficients of the expansion. The right-hand side of this system consists of the tested incident field and discretized spatio-temporal convolution of the unknown samples computed at the previous time steps with the Green function.
Bonfiglio, Paolo; Pompoli, Francesco; Lionti, Riccardo
2016-04-01
The transfer matrix method is a well-established prediction tool for the simulation of sound transmission loss and the sound absorption coefficient of flat multilayer systems. Much research has been dedicated to enhancing the accuracy of the method by introducing a finite size effect of the structure to be simulated. The aim of this paper is to present a reduced-order integral formulation to predict radiation efficiency and radiation impedance for a panel with equal lateral dimensions. The results are presented and discussed for different materials in terms of radiation efficiency, sound transmission loss, and the sound absorption coefficient. Finally, the application of the proposed methodology for rectangular multilayer systems is also investigated and validated against experimental data.
Institute of Scientific and Technical Information of China (English)
马杭; 黄兴
2003-01-01
Based on the fact that the singular boundary integrals in the sense of Cauchy principal value can be represented approxi-mately by the mean values of two companion nearly singular boundary integrals, a vary general approach was developed in the paper.In the approach, the approximate formulation before discretization was constructed to cope with the difficulties encountered in the cor-ner treatment in the formulations of hypersingular boundary integral equations. This makes it possible to solve the hypersingularboundary integral equation numerically in a non-regularized form and in a local manner by using conforming C0 quadratic boundary ele-ments and standard Gaussian quadratures similar to those employed in the conventional displacement-BIE formulations. The approxi-mate formulation is very convenient to use because the corner information is comprised naturally in the representations of those ap-proximate integrals. Numerical examples in plane elasticity show that with the present approach, the compatible or better results canbe achieved in comparison with those of the conventional BIE formulations.
Balcão, Victor M; Glasser, Cássia A; Chaud, Marco V; del Fiol, Fernando S; Tubino, Matthieu; Vila, Marta M D C
2014-11-01
The emergence of antibiotic-resistant bacterial strains and the weak penetration of antibiotics into bacterial biofilms put an emphasis in the need for safe and effective alternatives for antimicrobial treatments. The application of strictly lytic bacteriophages (or phages) has been proposed as an alternative (or complement) to conventional antibiotics, allowing release of the natural predators of bacteria directly to the site of infection. In the present research effort, production of bacteriophage derivatives (starting from lytic phage particle isolates), encompassing full stabilization of their three-dimensional structure, has been attempted via housing said bacteriophage particles within lipid nanovesicles integrating a multiple water-in-oil-in-water (W/O/W) emulsion. As a proof-of-concept for the aforementioned strategy, bacteriophage particles with broad lytic spectrum were entrapped within the aqueous core of lipid nanoballoons integrating a W/O/W multiple emulsion. Long-term storage of the multiple emulsions produced did not lead to leaching of phage particles, thus proving the effectiveness of the encapsulation procedure.
Assessment of strategy formulation
DEFF Research Database (Denmark)
Acur, Nuran; Englyst, Linda
2006-01-01
. Practical implications – The integration of three different strategy assessment approaches has been made to obtain a holistic, multi-perspective reflection on strategy formulation. Such reflection is assumed to enable managers to proactively evaluate the potential outcome and performance of their chosen......Purpose – Today, industrial firms need to cope with competitive challenges related to innovation, dynamic responses, knowledge sharing, etc. by means of effective and dynamic strategy formulation. In light of these challenges, the purpose of the paper is to present and evaluate an assessment tool...... for strategy formulation processes that ensures high quality in process and outcome. Design/methodology/approach – A literature review was conducted to identify success criteria for strategy formulation processes. Then, a simple questionnaire and assessment tool was developed and used to test the validity...
Directory of Open Access Journals (Sweden)
Jungki Lee
2015-01-01
Full Text Available The parallel volume integral equation method (PVIEM is applied for the analysis of elastic wave scattering problems in an unbounded isotropic solid containing multiple multilayered anisotropic elliptical inclusions. This recently developed numerical method does not require the use of Green’s function for the multilayered anisotropic inclusions; only Green’s function for the unbounded isotropic matrix is needed. This method can also be applied to solve general two- and three-dimensional elastodynamic problems involving inhomogeneous and/or multilayered anisotropic inclusions whose shape and number are arbitrary. A detailed analysis of the SH wave scattering is presented for multiple triple-layered orthotropic elliptical inclusions. Numerical results are presented for the displacement fields at the interfaces for square and hexagonal packing arrays of triple-layered elliptical inclusions in a broad frequency range of practical interest. It is necessary to use standard parallel programming, such as MPI (message passing interface, to speed up computation in the volume integral equation method (VIEM. Parallel volume integral equation method as a pioneer of numerical analysis enables us to investigate the effects of single/multiple scattering, fiber packing type, fiber volume fraction, single/multiple layer(s, multilayer’s shape and geometry, isotropy/anisotropy, and softness/hardness of the multiple multilayered anisotropic elliptical inclusions on displacements at the interfaces of the inclusions.
Investigation of caprock integrity during high-volume injection into the Utsira formation
Gasda, S. E.; Wangen, M.; Bjørnarå, T. I.
2015-12-01
The Utsira formation is a large offshore saline aquifer in the North Sea that is considered a likely candidate for storage of CO2 emissions. Currently, the Utsira is host to the longest operating CO2 storage project, the Sleipner project, which has injected 1 Mt CO2/y since 1996. The entire Utsira formation has an estimated storage capacity of 15 Gt, which is equal to 300 Sleipner-sized projects in simultaneous operation for the next 50 years. Injectivity into the Utsira is exceptionally good, and no pressurization has been observed at Sleipner. The formation is over 100-m thick and comprised of unconsolidated sand with high porosity and permeability (30-40% and 1-3 Darcy). The Nordland shale has been characterized as a high-quality seal that is regionally thick, extensive and absent of significant faults. Significant scale-up of CO2 injection into the Utsira is required to increase storage of regional CO2 emissions well beyond what is currently stored today. Full utilization of the Utsira storage capacity would result in injection rates >100 Mt/y, significantly larger than Sleipner. Despite the lack of pressure effects at Sleipner, higher injection rates will likely lead to pressure build-up in the Utsira. Relatively little is known about the magnitude of pressure build-up and resulting impact on caprock integrity with high-volume injection. The problem is complex, involving multiphase flow and mechanical deformation of the storage reservoir and the surrounding formations, and covers large spatial scales, ranging several hundred kilometers in lateral extent. There are significant challenges in applying fully coupled hydromechanical simulators to problems of this scale. The computational effort required to solve a resolved is significant, and efforts to reduce the complexity of the model are needed. In this study, simplified modeling approaches are investigated. A reduced order multiphase flow model coupled with a geomechanical model results in greater efficiency
CSIR Research Space (South Africa)
Heyns, Johan A
2012-06-01
Full Text Available combines a blended higher resolution scheme with the addition of an artificial compressive term to the volume-of-fluid equation. This reduces the numerical smearing of the interface associated with explicit higher resolution schemes while limiting...
Energy Technology Data Exchange (ETDEWEB)
Acker, T.
2011-12-01
This report describes the background, concepts, issues and conclusions related to the feasibility of integrating wind and hydropower, as investigated by the members of IEA Wind Task 24. It is the result of a four-year effort involving seven IEA member countries and thirteen participating organizations. The companion report, Volume 2, describes in detail the study methodologies and participant case studies, and exists as a reference for this report.
Lee, S. S.; Sengupta, S.
1978-01-01
A mathematical model package for thermal pollution analyses and prediction is presented. These models, intended as user's manuals, are three dimensional and time dependent using the primitive equation approach. Although they have sufficient generality for application at sites with diverse topographical features; they also present specific instructions regarding data preparation for program execution and sample problems. The mathematical formulation of these models is presented including assumptions, approximations, governing equations, boundary and initial conditions, numerical method of solution, and same results.
Energy Technology Data Exchange (ETDEWEB)
Lim, T.
2011-04-28
To simulate numerically a non-destructive by eddy current testing (NDT-CF), the sensor response can be modeled through a semi-analytical approach by volume integral equations. Faster than the finite element method, this approach is however restricted to the study of plane or cylindrical parts (without taking into account the edge effects) because of the complexity of the expression of the dyadic Green function for more general configurations. However, there is an industrial demand to extend the capabilities of the CF model in complex configurations (deformed plates, edges effects...). We were thus brought to formulate the electromagnetic problem differently, by setting ourselves the goal of maintaining a semi-analytical approach. The surface integral equation (SIE) expresses the volume problem by an equivalent transmission one at the interfaces (2D) between homogeneous sub-domains. This problem is approached by a linear system (by the method of moments), whose number of unknowns is reduced due to the nature of the surfacic mesh. Therefore, this system can be solved by a direct solver for small configurations. That enabled us to treat several various positions of the sensor for only one inversion of the impedance matrix. The numerical results obtained using this formulation involve plates with consideration of edge effects such as edge and corner. They are consistent with results obtained by the finite element method. For larger configurations, we conducted a preliminary study for the adaptation of an acceleration method of the matrix vector product involved in an iterative solver (fast multipole method or FMM) to define the conditions under which the FMM calculation works correctly (accuracy, convergence...) in the NDT's domain. A special attention has been given to the choice of basis functions (which have to satisfy an Hdiv conforming property) and on the evaluation of near interactions (which are weakly singular). (author) [French] Pour simuler
Energy Technology Data Exchange (ETDEWEB)
Webb, S.; Evans, P.M.; Swindell, W. (Institute of Cancer Research, Sutton (United Kingdom). Surrey Branch Royal Marsden Hospital, Sutton (United Kingdom)); Deasy, J.O. (Wisconsin Univ., Madison, WI (United States). Dept. of Medical Physics Wisconsin Univ., Madison, WI (United States). Dept. of Human Oncology)
1994-11-01
In this note it is shown that for a fixed integral dose to the planning target volume, the highest tumour control probability arises when the dose is spatially uniform. This 'uniform dose theorem' is proved both for (i) a specific TCP model based on Poisson/independent voxel statistics and (ii) any model for voxel control probability having a specific shape with respect to increasing dose. (author).
Palguta, T.; Bradley, W.; Stockton, T.
1988-01-01
Guidance in preparing and updating an integrated logistics support plan (ILSP) is given. Clear, concise, and detailed instructions are provided on the preparation and content of an ILSP in order to ensure a quality document that reflects total program requirements.
Lian, J; Song, H; Liu, R; Qi, S; Hu, A
2012-06-01
To compare low dose volume and integral dose of various rotational arc radiation therapy modalities, including helical tomotherapy (HT) and other volumetric modulated arc therapies (VMAT). A digital cylindrical phantom and an anthropomorphic pelvic phantom were used in the study. HT treatment was planned on TomoTherapy Planning Station (Accuray) and VMAT plans were generated on Pinnacle (Philips) and Eclipse (Varian). Same objectives and criteria were used for all the planning tasks. Tomotherapy plans were made with both 1cm jaw and 2.5cm jaw. Pinnacle SmartArc and Eclipse RapidArc plans used 1 arc and 2 arcs. Plan quality was evaluated by dose-volume histograms, conformity index (CI), and heterogeneity index (HI). V10% and V20% of body were used in quantifying low dose volume. Integral doses were computed for each plan and compared. Dose profiles across the target center were retrieved to show the rate of dose falls off. All arc TPS generated clinically acceptable plan with comparable target CI and HI. The V20% of body of the cylindrical phantom case were 3551cc, 4054cc, 3375cc, 3438cc, 3714cc and 3679cc for tomotherapy 1 cm and 2 cm jaw, SmartArc 1 arc and 2 arc, and RapidArc 1 arc and 2 arc plans, respectively. The integral doses were 19.67, 22.78, 18.68, 18.50, 19.78 and 19.73 Joule, respectively. For the anthropomorphic phantom, the integral doses were 81.69, 102.77, 84.5 and 82.5 Joule for tomotherapy 1cm, 2cm, SmartArc 1arc and RapidArc 1arc, respectively. Dose profiles showed tomotherapy 1cm plan had similar longitudinal penumbra as SmartArc and RapidArc, while tomotherapy 2.5cm plan produced significant broader penumbra. Similar low dose volume and integral dose are found in SmartArc, Rapid Arc, and as well as helical tomotherapy plan of 1cm jaw. Tomotherapy plans of 2.5cm jaw, however, shows higher low dose volume and integral dose. © 2012 American Association of Physicists in Medicine.
Awotwe Otoo, David; Agarabi, Cyrus; Khan, Mansoor A
2014-07-01
The aim of the present study was to apply an integrated process analytical technology (PAT) approach to control and monitor the effect of the degree of supercooling on critical process and product parameters of a lyophilization cycle. Two concentrations of a mAb formulation were used as models for lyophilization. ControLyo™ technology was applied to control the onset of ice nucleation, whereas tunable diode laser absorption spectroscopy (TDLAS) was utilized as a noninvasive tool for the inline monitoring of the water vapor concentration and vapor flow velocity in the spool during primary drying. The instantaneous measurements were then used to determine the effect of the degree of supercooling on critical process and product parameters. Controlled nucleation resulted in uniform nucleation at lower degrees of supercooling for both formulations, higher sublimation rates, lower mass transfer resistance, lower product temperatures at the sublimation interface, and shorter primary drying times compared with the conventional shelf-ramped freezing. Controlled nucleation also resulted in lyophilized cakes with more elegant and porous structure with no visible collapse or shrinkage, lower specific surface area, and shorter reconstitution times compared with the uncontrolled nucleation. Uncontrolled nucleation however resulted in lyophilized cakes with relatively lower residual moisture contents compared with controlled nucleation. TDLAS proved to be an efficient tool to determine the endpoint of primary drying. There was good agreement between data obtained from TDLAS-based measurements and SMART™ technology. ControLyo™ technology and TDLAS showed great potential as PAT tools to achieve enhanced process monitoring and control during lyophilization cycles. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.
United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.
This research summary presents discussions from two regional workshops held in Indonesia and Pakistan in 1989 and 1991, respectively. The focus of the workshops was to formulate prototype instructional materials of population education core messages for primary education, literacy and continuing education programs in the Asia Pacific Programme of…
Estimation of forest volumes by integrating Landsat TM imagery and forest inventory data
Institute of Scientific and Technical Information of China (English)
GU Huiyan; DAI Limin; WU Gang; XU Dong; WANG Shunzhong; WANG Hui
2006-01-01
Accurate information about forest volumes is essential for forest management planning. The survey interval of the Forest Resource Inventory of China (FRIC) is too long to meet the demand for timely decision-making required for forest protection, management, and utilization. Analysis of satellite imagery provides good potential for more frequent reporting of forest parameters. In this study, we describe an application of the k-nearest neighbors (kNN) method to Landsat TM imagery for improving estimation of forest volumes. Several spectral features were tested and compared in forest volume estimations, including normalized difference vegetation index, environmental vegetation index, and the combination of the spectral features. The combined index resulted in the most accurate volume estimations. The kNN estimator and the combined index were then used in forest volume estimation. The estimation error (RMSE) of the total volume was44.2%, much lower than those for Larix forest (the RMSE was 51.7%) and those for the Korean pine and broadleaved forests (the estimation errors were over 71.7% and 88.19%,respectively). This preliminary study demonstrates the potential of forest volume estimations with remote sensing data to provide useful information for forest management if only limited ground information is available.
World Bank
2012-01-01
Five East African countries Burundi, Kenya, Rwanda, Tanzania, and Uganda have made solid progress on integrating regionally in the East African Community (EAC) since 1999. Such advances are crucial, as integration in East Africa has the potential for higher than usual benefits: Burundi, Rwanda, and Uganda are landlocked, with very high costs to their economies. Successful integration will ...
Sterr, Annette; Dean, Phil J A; Szameitat, Andre J; Conforto, Adriana Bastos; Shen, Shan
2014-05-01
Initial evidence suggests that the integrity of the ipsilesional corticospinal tract (CST) after stroke is strongly related to motor function in the chronic state but not the treatment gain induced by motor rehabilitation. We examined the association of motor status and treatment benefit by testing patients with a wide range of severity of hemiparesis of the left and right upper extremity. Diffusion tensor imaging was performed in 22 patients beyond 12 months after onset of stroke with severe to moderate hemiparesis. Motor function was tested before and after 2 weeks of modified constraint-induced movement therapy. CST integrity, but not lesion volume, correlated with the motor ability measures of the Wolf Motor Function Test and the Motor Activity Log. No differences were found between left and right hemiparesis. Motor performance improved significantly with the treatment regime, and did so equally for patients with left and right arm paresis. However, treatment benefit was not associated with either CST integrity or lesion volume. CST integrity correlated best in this small trial with chronic long-term status but not treatment-induced improvements. The CST may play a different role in the mechanisms mediating long-term outcome compared to those underlying practice-induced gains after a chronic plateau in motor function.
Palguta, T.; Bradley, W.; Stockton, T.
1988-01-01
The purpose is to outline an Office of Space Science and Applications (OSSA) integrated logistics support strategy that will ensure effective logistics support of OSSA payloads at an affordable life-cycle cost. Program objectives, organizational relationships, and implementation of the logistics strategy are discussed.
Energy Technology Data Exchange (ETDEWEB)
Kulshreshtha, Usha, E-mail: ushakulsh@gmail.com [Department of Physics and Astronomy, Iowa State University, 50011, Ames, IA (United States); Department of Physics, Kirori Mal College, University of Delhi, 110007, Delhi (India); Kulshreshtha, Daya Shankar, E-mail: dskulsh@gmail.com [Department of Physics and Astronomy, Iowa State University, 50011, Ames, IA (United States); Department of Physics and Astrophysics, University of Delhi, 110007, Delhi (India); Vary, James P., E-mail: jvary@iastate.edu [Department of Physics and Astronomy, Iowa State University, 50011, Ames, IA (United States)
2015-04-28
Recently Grinstein, Jora, and Polosa have studied a theory of large-N scalar quantum chromodynamics in one space and one time dimension. This theory admits a Bethe–Salpeter equation describing the discrete spectrum of quark–antiquark bound states. They consider gauge fields in the adjoint representation of SU(N) and scalar fields in the fundamental representation. The theory is asymptotically free and linearly confining. The theory could possibly provide a good field theoretic framework for the description of a large class of diquark–antidiquark (tetra-quark) states. Recently we have studied the light-front quantization of this theory without a Higgs potential. In the present work, we study the light-front Hamiltonian, path integral, and BRST formulations of the theory in the presence of a Higgs potential. The light-front theory is seen to be gauge invariant, possessing a set of first-class constraints. The explicit occurrence of spontaneous symmetry breaking in the theory is shown in unitary gauge as well as in the light-front ’t Hooft gauge.
Energy Technology Data Exchange (ETDEWEB)
Kulshreshtha, Usha [Iowa State University, Department of Physics and Astronomy, Ames, IA (United States); University of Delhi, Department of Physics, Kirori Mal College, Delhi (India); Kulshreshtha, Daya Shankar [Iowa State University, Department of Physics and Astronomy, Ames, IA (United States); University of Delhi, Department of Physics and Astrophysics, Delhi (India); Vary, James P. [Iowa State University, Department of Physics and Astronomy, Ames, IA (United States)
2015-04-01
Recently Grinstein, Jora, and Polosa have studied a theory of large- N scalar quantum chromodynamics in one space and one time dimension. This theory admits a Bethe-Salpeter equation describing the discrete spectrum of quark-antiquark bound states. They consider gauge fields in the adjoint representation of SU(N) and scalar fields in the fundamental representation. The theory is asymptotically free and linearly confining. The theory could possibly provide a good field theoretic framework for the description of a large class of diquark-antidiquark (tetra-quark) states. Recently we have studied the light-front quantization of this theory without a Higgs potential. In the present work, we study the light-front Hamiltonian, path integral, and BRST formulations of the theory in the presence of a Higgs potential. The light-front theory is seen to be gauge invariant, possessing a set of first-class constraints. The explicit occurrence of spontaneous symmetry breaking in the theory is shown in unitary gauge as well as in the light-front 't Hooft gauge. (orig.)
Kulshreshtha, Usha; Vary, James P
2015-01-01
Recently Grinstein, Jora, and Polosa have studied a theory of large-$N$ scalar quantum chromodynamics in one-space one-time dimension. This theory admits a Bethe-Salpeter equation describing the discrete spectrum of quark-antiquark bound states. They consider gauge fields in the adjoint representation of $SU(N)$ and scalar fields in the fundamental representation. The theory is asymptotically free and linearly confining. The theory could possibly provide a good field theoretic framework for the description of a large class of diquark-antidiquark (tetra-quark) states. Recently we have studied the light-front quantization of this theory without a Higgs potential. In the present work, we study the light-front Hamiltonian, path integral and BRST formulations of the theory in the presence of a Higgs potential. The light-front theory is seen to be gauge-invariant, possessing a set of first-class constraints. The explicit occurrence of spontaneous symmetry breaking in the theory is shown in unitary gauge as well as ...
Directory of Open Access Journals (Sweden)
Bálint Várkuti
Full Text Available BACKGROUND: In the graph theoretical analysis of anatomical brain connectivity, the white matter connections between regions of the brain are identified and serve as basis for the assessment of regional connectivity profiles, for example, to locate the hubs of the brain. But regions of the brain can be characterised further with respect to their gray matter volume or resting state perfusion. Local anatomical connectivity, gray matter volume and perfusion are traits of each brain region that are likely to be interdependent, however, particular patterns of systematic covariation have not yet been identified. METHODOLOGY/PRINCIPAL FINDINGS: We quantified the covariation of these traits by conducting an integrative MRI study on 23 subjects, utilising a combination of Diffusion Tensor Imaging, Arterial Spin Labeling and anatomical imaging. Based on our hypothesis that local connectivity, gray matter volume and perfusion are linked, we correlated these measures and particularly isolated the covariation of connectivity and perfusion by statistically controlling for gray matter volume. We found significant levels of covariation on the group- and regionwise level, particularly in regions of the Default Brain Mode Network. CONCLUSIONS/SIGNIFICANCE: Connectivity and perfusion are systematically linked throughout a number of brain regions, thus we discuss these results as a starting point for further research on the role of homology in the formation of functional connectivity networks and on how structure/function relationships can manifest in the form of such trait interdependency.
Directory of Open Access Journals (Sweden)
Zahi Abu Sarhan
2013-02-01
Full Text Available The traffic volume becomes one of the top problems in the world, the volume of traffic spends many time and much money, the traffic volume grows daily, and there is not effective and suitable solutions for grows problem. This paper will present and describe an effective approach to integrate the Service Oriented Architecture with mobile devices and services agents in Traffic Management Systems (TMS. The Traffic Volume Control System (TVCS should enable mobile short message service (SMS notifications. Unfortunately, cellular SMS notification based on services that are not aspect of the TVCS.Developing altered exterior systems and services, to be virtually aspect of TVCS, are one of the most incorporation difficulties. In this paper, a Service Oriented Architecture (SOA approach to includecellular SMS alerts in TVCS is presented. Suggested Structure includes two layers: Service layer and Interface layer. The Service layer includes all the system software. The service layer consists of three sub layers: Orchestration, Application Services, and Agents sub-layers. While the Interface layer interrelates with speed detectors and users via sites, and with exterior organization services via Web services.
Miyake, Y.; Hozumi, T; Mori, I.; Sugioka, K; Yamamuro, A; Akasaka, T; Homma, S; Yoshida, K.; Yoshikawa, J
2002-01-01
Background: The recently introduced automated cardiac flow measurement (ACM) technique provides a quick and an accurate automated calculation of stroke volume and cardiac output. This is obtained by spatio-temporal integration of digital Doppler velocity profile data.
Energy Technology Data Exchange (ETDEWEB)
None
1978-06-01
The purpose of this project is to evaluate six candidate hullforms as candidates for the OTEC commercial plant. This volume is a summary of the conceptual design including facility requirements, cost, schedule, and site sensitivity. Two OTEC commercial plant configurations are considered in this study: the ship and the semi-submersible. Engineering drawings are presented. (WHR)
Attention in spina bifida myelomeningocele: Relations with brain volume and integrity
Directory of Open Access Journals (Sweden)
Paulina A. Kulesz
2015-01-01
Full Text Available This study investigated the relations of tectal volume and superior parietal cortex, as well as alterations in tectocortical white matter connectivity, with the orienting and executive control attention networks in individuals with spina bifida myelomeningocele (SBM. Probabilistic diffusion tractography and quantification of tectal and superior parietal cortical volume were performed on 74 individuals aged 8–29 with SBM and a history of hydrocephalus. Behavioral assessments measured posterior (covert orienting and anterior (conflict resolution, attentional control attention network functions. Reduced tectal volume was associated with slower covert orienting; reduced superior parietal cortical volume was associated with slower conflict resolution; and increased axial diffusivity and radial diffusivity along both frontal and parietal tectocortical pathways were associated with reduced attentional control. Results suggest that components of both the orienting and executive control attention networks are impaired in SBM. Neuroanatomical disruption to the orienting network appears more robust and a direct consequence of characteristic midbrain dysmorphology; whereas, executive control difficulties may emerge from parietal cortical anomalies and reduced frontal and parietal cortical–subcortical white matter pathways susceptible to the pathophysiological effects of congenital hydrocephalus.
Aggarwal, Arun K.
1993-01-01
Spherical roller bearings have typically been used in applications with speeds limited to about 5000 rpm and loads limited for operation at less than about 0.25 million DN. However, spherical roller bearings are now being designed for high load and high speed applications including aerospace applications. A computer program, SASHBEAN, was developed to provide an analytical tool to design, analyze, and predict the performance of high speed, single row, angular contact (including zero contact angle), spherical roller bearings. The material presented is the mathematical formulation and analytical methods used to develop computer program SASHBEAN. For a given set of operating conditions, the program calculates the bearings ring deflections (axial and radial), roller deflections, contact areas stresses, depth and magnitude of maximum shear stresses, axial thrust, rolling element and cage rotational speeds, lubrication parameters, fatigue lives, and rates of heat generation. Centrifugal forces and gyroscopic moments are fully considered. The program is also capable of performing steady-state and time-transient thermal analyses of the bearing system.
Davis, Jeffrey R.; Fitts, David J.
2009-01-01
This viewgraph presentation reviews the standards for space flight hardware based on human capabilities and limitations. The contents include: 1) Scope; 2) Applicable documents; 3) General; 4) Human Physical Characteristics and Capabilities; 5) Human Performance and Cognition; 6) Natural and Induced Environments; 7) Habitability Functions; 8) Architecture; 9) Hardware and Equipment; 10) Crew Interfaces; 11) Spacesuits; 12) Operatons: Reserved; 13) Ground Maintenance and Assembly: Reserved; 14) Appendix A-Reference Documents; 15) Appendix N-Acronyms and 16) Appendix C-Definition. Volume 2 is supported by the Human Integration Design Handbook (HIDH)s.
Amalu, E. H.; Lui, Y. T.; Ekere, N. N.; Bhatti, R. S.; Takyi, G.
2011-01-01
The electronics manufacturing industry was quick to adopt and use the Surface Mount Technology (SMT) assembly technique on realization of its huge potentials in achieving smaller, lighter and low cost product implementations. Increasing global customer demand for miniaturized electronic products is a key driver in the design, development and wide application of high-density area array package format. Electronic components and their associated solder joints have reduced in size as the miniaturization trend in packaging continues to be challenged by printing through very small stencil apertures required for fine pitch flip-chip applications. At very narrow aperture sizes, solder paste rheology becomes crucial for consistent paste withdrawal. The deposition of consistent volume of solder from pad-to-pad is fundamental to minimizing surface mount assembly defects. This study investigates the relationship between volume of solder paste deposit (VSPD) and the volume of solder bump formed (VSBF) after reflow, and the effect of reflow profile parameters on lead-free solder bump formation and the associated solder joint integrity. The study uses a fractional factorial design (FFD) of 24-1 Ramp-Soak-Spike reflow profile, with all main effects and two-way interactions estimable to determine the optimal factorial combination. The results from the study show that the percentage change in the VSPD depends on the combination of the process parameters and reliability issues could become critical as the size of solder joints soldered on the same board assembly vary greatly. Mathematical models describe the relationships among VSPD, VSBF and theoretical volume of solder paste. Some factors have main effects across the volumes and a number of interactions exist among them. These results would be useful for R&D personnel in designing and implementing newer applications with finer-pitch interconnect.
Formulation and Characterization of Aceclofenac -Aloe vera Transemulgel.
Raju, Y Prasanna; Haritha, K; Satyanarayana, Rao P; Vandana, K R; Bindu, D Thushara; Vinesha, V; Chowdary, V Harini
2015-01-01
The present research was aimed to formulate aceclofenac transemulgel using Aloe vera as gel base. The prepared formulations were subjected to physical characterization, in-vitro and in-vivo assessment. Aceclofenac, a hydrophobic potential non steroidal anti inflammatory drug, causes ulceration upon chronic oral administration, could be formulated into transemulgel to enhance therapeutic efficacy and to lower the unwanted side effects. The transemulgel was prepared from aqueous Aloe vera gel and aceclofenac emulsion. The prepared transemulgel was evaluated for its pH, viscosity, drug content, skin irritation, in-vitro diffusion and accelerated stability studies. The prepared aceclofenac-Aloe vera tranemulgel and commercial aceclofenac gel were subjected to pharmacodynamic studies in albino rats of Wistar strain employing carrageenan induced left hind paw edema method to assess the anti-inflammatory effect. The transemulgel showed a pH of 6.78 and viscosity of 18 cps. In-vitro diffusion data revealed better permeation characteristics. Topical application of formulation found no skin irritation. Stability study has proved the integrity of the formulation. The prepared aceclofenac Aloe vera transemulgel showed better in-vitro drug release when compared with the commercial aceclofenac gel formulation. Anti-inflammatory activity in treated rats showed the significant paw volume reduction at pAloe vera as gel base.
Digital Systems Validation Handbook. Volume 2. Chapter 18. Avionic Data Bus Integration Technology
1993-11-01
U.S. Department of Transportation PFe 1rs Aviation Administration DOT/FAA/CT-88/10 HANDBOOK- VOLUME H DIGITAL SYSTEMS VALIDATION - CHAPTER 18 tw...18-29 improve identification, control, and auditing of software. SCM and SQA methods in RTCA/DO-178A are drawn directly from proven methods of hardware...procedures, and practices; reviews and audits ; configuration management; medium control; testing; supplier control; and appropriate records. A brief
Energy Technology Data Exchange (ETDEWEB)
NONE
1998-05-01
This volume contains the appendices that provide additional environment, safety, and health (ES and H) information to complement Volume 1 of this Standard. Appendix A provides a set of candidate DOE ES and H directives and external regulations, organized by hazard types that may be used to identify potentially applicable directives to a specific facility disposition activity. Appendix B offers examples and lessons learned that illustrate implementation of ES and H approaches discussed in Section 3 of Volume 1. Appendix C contains ISMS performance expectations to guide a project team in developing and implementing an effective ISMS and in developing specific performance criteria for use in facility disposition. Appendix D provides guidance for identifying potential Applicable or Relevant and Appropriate Requirements (ARARs) when decommissioning facilities fall under the Comprehensive Environmental Response, Compensation, Liability Act (CERCLA) process. Appendix E discusses ES and H considerations for dispositioning facilities by privatization. Appendix F is an overview of the WSS process. Appendix G provides a copy of two DOE Office of Nuclear Safety Policy and Standards memoranda that form the bases for some of the guidance discussed within the Standard. Appendix H gives information on available hazard analysis techniques and references. Appendix I provides a supplemental discussion to Sections 3.3.4, Hazard Baseline Documentation, and 3.3.6, Environmental Permits. Appendix J presents a sample readiness evaluation checklist.
Energy Technology Data Exchange (ETDEWEB)
Seth, S.; Bail, W.; Cleaves, D.; Cohen, H.; Hybertson, D.; Schaefer, C.; Stark, G.; Ta, A.; Ulery, B. [Mitre Corp., McLean, VA (United States)
1995-06-01
The work documented in this report was performed in support of the US Nuclear Regulatory Commission to examine the technical basis for candidate guidelines that could be considered in reviewing and evaluating high integrity computer e following software development and assurance activities: Requirements specification; design; coding; verification and validation, inclukding static analysis and dynamic testing; safety analysis; operation and maintenance; configuration management; quality assurance; and planning and management. Each activity (framework element) was subdivided into technical areas (framework subelements). The report describes the development of approximately 200 candidate guidelines that span the entire ran e identification, categorization and prioritization of technical basis for those candidate guidelines; and the identification, categorization and prioritization of research needs for improving the technical basis. The report has two volumes: Volume 1, Executive Summary includes an overview of the framwork and of each framework element, the complete set of candidate guidelines, the results of the assessment of the technical basis for each candidate guideline, and a discussion of research needs that support the regulatory function; this document, Volume 2, is the main report.
Energy Technology Data Exchange (ETDEWEB)
Seth, S.; Bail, W.; Cleaves, D.; Cohen, H.; Hybertson, D.; Schaefer, C.; Stark, G.; Ta, A.; Ulery, B. [Mitre Corp., McLean, VA (United States)
1995-06-01
The work documented in this report was performed in support of the US Nuclear Regulatory Commission to examine the technical basis for candidate guidelines that could be considered in reviewing and evaluating high integrity computer software used in the safety systems of nuclear power plants. The framework for the work consisted of the following software development and assurance activities: requirements specification; design; coding; verification and validation, including static analysis and dynamic testing; safety analysis; operation and maintenance; configuration management; quality assurance; and planning and management. Each activity (framework element) was subdivided into technical areas (framework subelements). The report describes the development of approximately 200 candidate guidelines that span the entire range of software life-cycle activities; the assessment of the technical basis for those candidate guidelines; and the identification, categorization and prioritization of research needs for improving the technical basis. The report has two volumes: Volume 1, Executive Summary, includes an overview of the framework and of each framework element, the complete set of candidate guidelines, the results of the assessment of the technical basis for each candidate guideline, and a discussion of research needs that support the regulatory function; Volume 2 is the main report.
Integrated Computer-Aided Manufacturing (ICAM) Architecture. Part 3. Volume 8. Technology Transfer.
1983-09-01
Drvtd. . ; THE INFRl*,t.Ti j T’i’ MAI~ "WE BEL :1E’,E - .HA i * ARCHITECTURE P’,K’ l .... ’ J L.E % ANALYTICA ML ’-.q TEGTC 3USNS ZA<. * ~-- DAY OPERA...OF MANUFACTURING ENGINEER’S COMPUTF. AND AUTOMATED SYSTEMS ASSOCIATION (SME CASA ) REtrNTLY PUBLISHED THIS LOGO DEVELOPED BY ITS TECHNICAL COUNCIL AND...THAT, LIKE ICAM, SME CASA ALSO SEES INTEGRATED SYSTEMS ARCHITECTURE AND COMMON DATABASES AS THE CENTRAL FOCUS REQUIRED FOR FUTURE FACTORY INTEGRATION
Technical Opinions Regarding Knowledge-Based Integrated Information Systems Engineering. Volume 8.
1987-12-01
project status from Rockwell, TRW, and Lockheed; and (d) Geographically dispersed units around the globe. TAP MEETING, 5/21-22/87 37. He first examined...of them (some containing more than one DDAS) are integrated into an operating segement of the factory data network. For each independently operating
INTEGRATED AIR POLLUTION CONTROL SYSTEM, VERSION 4.0 - VOLUME 2: TECHNICAL DOCUMENTATION MANUAL
The Integrated Air Pollution Control System (IAPCS) was developed for the U.S. EPA's Air and Energy Engineering Research Laboratory to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, and ...
Space shuttle program: Shuttle Avionics Integration Laboratory. Volume 7: Logistics management plan
1974-01-01
The logistics management plan for the shuttle avionics integration laboratory defines the organization, disciplines, and methodology for managing and controlling logistics support. Those elements requiring management include maintainability and reliability, maintenance planning, support and test equipment, supply support, transportation and handling, technical data, facilities, personnel and training, funding, and management data.
Evaluating an Integrated Approach to the Management of Cerebral Palsy. Volume I of IV. Final Report.
Heal, Laird W.
The integrated Management of Cerebral Palsy (IMCP) project evaluated the effectiveness of a program of conductive education, which was said to involve training motorically disabled children in small, motivating groups of similarly handicapped peers to actively and voluntarily pursue those movements that are both incompatible with reflexes and…
Kupetz, Rita, Ed.; Becker, Carmen, Ed.
2014-01-01
Content and Language Integrated Learning (CLIL) is an established approach to support multilingualism in Europe by teaching various school subjects in an additional language. The practices used, however, vary considerably. Our book considers this diversity by looking at CLIL scenarios, defined as learning environments supporting content learning,…
Robins Air Force Base integrated resource assessment. Volume 3, Resource assessment
Energy Technology Data Exchange (ETDEWEB)
Sullivan, G.P.; Keller, J.M.; Stucky, D.J.; Wahlstrom, R.R.; Larson, L.L.
1993-10-01
The US Air Force Materiel Command (AFMC) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Robins Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the AFMC Robins AFB facility located approximately 15 miles south of Macon, Georgia. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analyses of EROs are presented in 13 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative-description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and savings to investment ratio (SIR) of each ERO.
Energy Technology Data Exchange (ETDEWEB)
Keller, J.M.; Dittmer, A.L.; Elliott, D.B.; McMordie, K.L.; Richman, E.E.; Stucky, D.J.; Wahlstrom, R.R.; Hadley, D.L.
1995-02-01
The U.S. Army Forces Command (FORSCOM) has tasked the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Irwin. This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the FORSCOM Fort Irwin facility located near Barstow, California. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analyses of EROs are presented in 16 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative description of each ERO is provided, along with a table detailing information on the installed cost, energy and dollar savings; impacts on operations and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present valve (NPV) and savings-to-investment ratio (SIR) of each ERO.
Patrick Air Force Base integrated resource assessment. Volume 3, Resource assessment
Energy Technology Data Exchange (ETDEWEB)
Sandusky, W.F.; Parker, S.A.; King, D.A.; Wahlstrom, R.R.; Elliott, D.B.; Shankle, S.A.
1993-12-01
The US Air Force has tasked the Pacific Northwest Laboratory (PNL) in support of the US Department of Energy Federal Energy Management Program to identify, evaluate, and assist in acquiring all cost effective energy projects at Patrick Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at Patrick AFB which is located south of Cocoa Beach, Florida. It is a companion report to Volume 1, Executive Summary, and Volume.2, Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings, impacts on operations and maintenance, and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost analysis indicating the net present value and value index of each ERO.
Patrick Air Force Base integrated resource assessment. Volume 2, Baseline detail
Energy Technology Data Exchange (ETDEWEB)
Wahlstrom, R.R.; King, D.A.; Parker, S.A.; Sandusky, W.F.
1993-08-01
The US Air Force has tasked the Pacific Northwest Laboratory (PNL), in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to assess energy use at Patrick Air Force Base (AFB). The information obtained from this assessment will be used in identifying energy resource opportunities to reduce overall energy consumption on the base. The primary focus of this report is to assess the current baseline energy consumption at Patrick AFB. It is a comparison report to Volume 1, the Executive Summary, and Volume 3, the Resource Assessment. This assessment requires that information be obtained and characterized for buildings, utilities, energy sources, energy uses, and load profile information to be used to improve the characterization of energy use on the base. The characteristics of electricity, natural gas, and No. 2 fuel oil are analyzed for on-base facilities and housing. The assessment examines basic regional information used to determine energy-use intensity (EUI) values for Patrick AFB facilities by building, fuel type, and energy end use. It also provides a summary of electricity consumption from Florida Power and Light Company (FPL) metered data for 1985-1991. Load profile information obtained from FPL data is presented for the north and south substations for the four seasons of the year, including weekdays and weekends.
Energy Technology Data Exchange (ETDEWEB)
Chang, C S; Ku, S; Greengard, L; Park, G [Courant Institute of Mathematical Sciences, New York University, NY 10012 (United States); Diamond, P; Dif-Pradalier, G [University of California at San Diego, La Jolla, CA 92093 (United States); Adams, M; Keyes, D [Columbia University, New York, NY 10027 (United States); Barreto, R; D' Azevedo, E; Klasky, S; Podhorszki, N [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Chen, Y; Parker, S [University of Colorado at Boulder, Boulder, CO 80309 (United States); Cummings, J [California Institute of Technology, Pasadena, CA 91125 (United States); Ethier, S; Hahm, T S [Princeton Plasma Physics Laboratory, Princeton, NJ 08543 (United States); Hinton, F [Hinton Associates, Escondido, CA 92029 (United States); Lin, Z [University of California at Irvine, Irvine, CA 92697 (United States); Lofstead, J, E-mail: cschang@cims.nyu.ed [Georgia Institute of Technology, Atlanta, GA 30332 (United States)
2009-07-01
Performance prediction for ITER is based upon the ubiquitous experimental observation that the plasma energy confinement in the device core is strongly coupled to the edge confinement for an unknown reason. The coupling time-scale is much shorter than the plasma transport time-scale. In order to understand this critical observation, a multi-scale turbulence-neoclassical simulation of integrated edge-core plasma in a realistic diverted geometry is a necessity, but has been a formidable task. Thanks to the recent development in high performance computing, we have succeeded in the integrated multiscale gyrokinetic simulation of the ion-temperature-gradient driven turbulence in realistic diverted tokamak geometry for the first time. It is found that modification of the self-organized criticality in the core plasma by nonlocal core-edge coupling of ITG turbulence can be responsible for the core-edge confinement coupling.
Energy Technology Data Exchange (ETDEWEB)
Chang, C S [New York University; Ku, Seung-Hoe [New York University; Diamond, Patrick [Columbia University; Adams, Mark [Columbia University; Tchoua, Roselyne B [ORNL; Chen, Yang [University of Colorado, Boulder; Cummings, Julian [California Institute of Technology, Pasadena; D' Azevedo, Eduardo [ORNL; Dif-Pradalier, Guilhem [University of California, San Diego; Ethier, Stephane [Princeton Plasma Physics Laboratory (PPPL); Greengard, Leslie [New York University; Hahm, Taik Soo [Princeton Plasma Physics Laboratory (PPPL); Hinton, Fred [University of California, San Diego; Keyes, David E [Columbia University; Klasky, Scott A [ORNL; Lin, Zhihong [University of California, Irvine; Lofstead, J. [Georgia Institute of Technology; Park, G. [New York University; Parker, Scott [University of Colorado, Boulder; Podhorszki, Norbert [ORNL; Schwan, Karsten [Georgia Institute of Technology; Shoshani, A. [Lawrence Berkeley National Laboratory (LBNL); Silver, D. [Rutgers University; Weitzner, Harold [New York University; Wolf, M. [Georgia Institute of Technology; Worley, Patrick H [ORNL; Yoon, E. [Princeton Plasma Physics Laboratory (PPPL); Zorin, Denis [New York University
2009-01-01
Performance prediction for ITER is based upon the ubiquitous experimental observation that the plasma energy confinement in the device core is strongly coupled to the edge confinement for an unknown reason. The coupling time-scale is much shorter than the plasma transport time-scale. In order to understand this critical observation, a multi-scale turbulence-neoclassical simulation of integrated edge-core plasma in a realistic diverted geometry is a necessity, but has been a formidable task. Thanks to the recent development in high performance computing, we have succeeded in the integrated multiscale gyrokinetic simulation of the ion-temperature-gradient driven turbulence in realistic diverted tokamak geometry for the first time. It is found that modification of the self-organized criticality in the core plasma by nonlocal core-edge coupling of ITG turbulence can be responsible for the core-edge confinement coupling.
Chang, C. S.; Ku, S.; Diamond, P.; Adams, M.; Barreto, R.; Chen, Y.; Cummings, J.; D'Azevedo, E.; Dif-Pradalier, G.; Ethier, S.; Greengard, L.; Hahm, T. S.; Hinton, F.; Keyes, D.; Klasky, S.; Lin, Z.; Lofstead, J.; Park, G.; Parker, S.; Podhorszki, N.; Schwan, K.; Shoshani, A.; Silver, D.; Wolf, M.; Worley, P.; Weitzner, H.; Yoon, E.; Zorin, D.
2009-07-01
Performance prediction for ITER is based upon the ubiquitous experimental observation that the plasma energy confinement in the device core is strongly coupled to the edge confinement for an unknown reason. The coupling time-scale is much shorter than the plasma transport time-scale. In order to understand this critical observation, a multi-scale turbulence-neoclassical simulation of integrated edge-core plasma in a realistic diverted geometry is a necessity, but has been a formidable task. Thanks to the recent development in high performance computing, we have succeeded in the integrated multiscale gyrokinetic simulation of the ion-temperature-gradient driven turbulence in realistic diverted tokamak geometry for the first time. It is found that modification of the self-organized criticality in the core plasma by nonlocal core-edge coupling of ITG turbulence can be responsible for the core-edge confinement coupling.
Energy Technology Data Exchange (ETDEWEB)
Chang, C S [New York University; Ku, Seung-Hoe [New York University; Diamond, P. H. [University of California, San Diego; Adams, Mark [Columbia University; Tchoua, Roselyne B [ORNL; Chen, Yang [University of Colorado, Boulder; Cummings, J. [California Institute of Technology, University of California, Davis; D' Azevedo, Ed F [ORNL; Dif-Pradalier, Guilhem [University of California, San Diego; Ethier, Stephane [Princeton Plasma Physics Laboratory (PPPL); Greengard, Leslie [New York University; Hahm, Taik Soo [Princeton Plasma Physics Laboratory (PPPL); Hinton, Fred [University of California, San Diego; Keyes, David E [Columbia University; Klasky, Scott A [ORNL; Lin, Z. [University of California, Irvine; Lofstead, J. [Georgia Institute of Technology; Park, G. [New York University; Podhorszki, Norbert [ORNL; Schwan, Karsten [Georgia Institute of Technology; Shoshani, A. [Lawrence Berkeley National Laboratory (LBNL); Silver, D. [Rutgers University; Wolf, M. [Georgia Institute of Technology; Worley, Patrick H [ORNL; Zorin, Denis [New York University
2009-01-01
Performance prediction for ITER is based upon the ubiquitous experimental observation that the plasma energy confinement in the device core is strongly coupled to the edge confinement for an unknown reason. The coupling time-scale is much shorter than the plasma transport time-scale. In order to understand this critical observation, a multi-scale turbulence-neoclassical simulation of integrated edge-core plasma in a realistic diverted geometry is a necessity, but has been a formidable task. Thanks to the recent development in high performance computing, we have succeeded in the integrated multiscale gyrokinetic simulation of the ion-temperature-gradient driven turbulence in realistic diverted tokamak geometry for the first time. It is found that modification of the self-organized criticality in the core plasma by nonlocal core-edge coupling of ITG turbulence can be responsible for the core-edge confinement coupling.
Integrating Syntax, Semantics, and Discourse DARPA Natural Language Understanding Program. Volume 1
1987-05-14
given syntactically; essential roles are left unfilled. This is because if a nominalization is being used anaphorically , some of its roles may...f^« l^m ’’a ’ Unisys Defense Systems Integrating Syntax, Semantics, Discourse filled when the event was first described. The anaphoric reference...pass, the interpreter looks for a referent, which, if found, will unify with the nominali- zation representation, sharing variable bindings . This is
1993-04-02
Appendix wre Incuded to give the reader a cursory3 ~look at the IDEF data moideling techniques; ( IDEFIX ). Definition 3 ~documentation of data elements...and their relationships in the enerprise. The IDEFIX technique is the key to achieving integration. As a resut of applying the techniquie,3 ~unique data...definitions emerge, which describe the stable wacwe of an organizaion’s rwsable data. Components Activities I Th~e basic components of an IDEFIX
Strategic, Organizational and Standardization Aspects of Integrated Information Systems. Volume 6.
1987-12-01
For the specific application models, NAM, IDEFIX and other languages were used. Models using a language other then NIAM had to be translated to NIAM...information flow diagram consists of a set of processes, user input, data bases, conceptual schema and information flow. IDEFIX 0 IDEF stands for Integrated...behavior, information and resources of a manufacturing system. IDEFIX is the latest version of this method. IDEF is a language with syntax and semantics
Energy Technology Data Exchange (ETDEWEB)
NONE
1998-05-01
This Department of Energy (DOE) technical standard (referred to as the Standard) provides guidance for integrating and enhancing worker, public, and environmental protection during facility disposition activities. It provides environment, safety, and health (ES and H) guidance to supplement the project management requirements and associated guidelines contained within DOE O 430.1A, Life-Cycle Asset Management (LCAM), and amplified within the corresponding implementation guides. In addition, the Standard is designed to support an Integrated Safety Management System (ISMS), consistent with the guiding principles and core functions contained in DOE P 450.4, Safety Management System Policy, and discussed in DOE G 450.4-1, Integrated Safety Management System Guide. The ISMS guiding principles represent the fundamental policies that guide the safe accomplishment of work and include: (1) line management responsibility for safety; (2) clear roles and responsibilities; (3) competence commensurate with responsibilities; (4) balanced priorities; (5) identification of safety standards and requirements; (6) hazard controls tailored to work being performed; and (7) operations authorization. This Standard specifically addresses the implementation of the above ISMS principles four through seven, as applied to facility disposition activities.
Integrating model of the Project Independence Evaluation System. Volume V. Code documentation
Energy Technology Data Exchange (ETDEWEB)
Shaw, M L; Allen, B J; Lutz, M S; Gale, J E; O& #x27; Hara, N E; Wood, R K
1978-07-01
This volume is a description of the Project Independence Evaluation System as a computer system. It is intended for readers wanting a basic understanding of the computer implementation of PIES rather than an understanding of the modeling methodology. It can assist those who wish to run PIES on the EIA computer facility or to use PIES on their own facilities, or to analyze the PIES computer processing. The document contains: an overview of the computer implementation; a description of the data and naming conventions used in PIES; a functional description of PIES data processing; PIES hardware and software requirements; and an operational description of the PIES processing flow. This overview defines the scope of PIES in this report and thus governs the computer system descriptions that follow. It also provides an historical view of the development of PIES.
Vandenberg Air Force Base integrated resource assessment. Volume 3, Resource assessment
Energy Technology Data Exchange (ETDEWEB)
Daellenbach, K.K.; Dagle, J.E.; Dittmer, A.L.; Elliott, D.B.; Halverson, M.A.; Hickman, B.J.; Parker, G.B.; Richman, E.E.; Shankle, S.A.
1993-06-01
The US Air Force Space Command (SPACECOM) has tasked the Pacific Northwest Laboratory (PNL), as the lead laboratory supporting the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the SPACECOM VAFB facility located approximately 50 miles northwest of Santa Barbara, California. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analysis of EROs are presented in ten common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). In addition, a case study of process loads at Space Launch Complex-4 (SLC-4) is included. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O and M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and value index (VI) of each ERO. Finally, an appendix includes a summary of an economic analysis case study of the South Vandenberg Power Plant (SVPP) operating scenarios.
Vandenberg Air Force Base integrated resource assessment. Volume 2, Baseline detail
Energy Technology Data Exchange (ETDEWEB)
Halverson, M.A.; Richman, E.E.; Dagle, J.E.; Hickman, B.J.; Daellenbach, K.K.; Sullivan, G.P.
1993-06-01
The US Air Force Space Command has tasked the Pacific Northwest Laboratory, as the lead laboratory supporting the US Department of Energy Federal Energy Management Program, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is a model program PNL is designing for federal customers served by the Pacific Gas and Electric Company (PG and E). The primary goal of the VAFB project is to identify all electric energy efficiency opportunities, and to negotiate with PG and E to acquire those resources through a customized demand-side management program for its federal clients. That customized program should have three major characteristics: (1) 100% up-front financing; (2) substantial utility cost-sharing; and (3) utility implementation through energy service companies under contract to the utility. A similar arrangement will be pursued with Southern California Gas for non-electric resource opportunities if that is deemed desirable by the site and if the gas utility seems open to such an approach. This report documents the assessment of baseline energy use at VAFB located near Lompoc, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Resource Assessment. This analysis examines the characteristics of electric, natural gas, fuel oil, and propane use for fiscal year 1991. It records energy-use intensities for the facilities at VAFB by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A more complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, and applicable losses.
Cape Canaveral Air Force Station integrated resource assessment. Volume 3, Resource assessment
Energy Technology Data Exchange (ETDEWEB)
Sandusky, W.F.; Eichman, C.J.; King, D.A.; McMordie, K.L.; Parker, S.A.; Shankle, S.A.; Wahlstrom, R.R.
1994-03-01
The U.S. Air Force (USAF) has tasked the Pacific Northwest Laboratory (PNL) in support of the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Cape Canaveral Air Force Station (AFS). Projects considered can be either in the form of energy management or energy conservation. The overall efforts of this task are based on a model program PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at Cape Canaveral AFS, which is located approximately 10 miles north of Cocoa Beach, Florida. It is a companion report to Volume 1: Executive Summary and Volume 2: Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings, impacts on operations and maintenance (O&M), and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. Descriptions of the evaluation methodologies and technical and cost assumptions are also provided for each ERO. Summary tables present the cost- effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis, indicating the net present value (NPV) and savings-to-investment ratio (SIR) of each ERO.
Vandenberg Air Force Base integrated resource assessment. Volume 2, Baseline detail
Energy Technology Data Exchange (ETDEWEB)
Halverson, M.A.; Richman, E.E.; Dagle, J.E.; Hickman, B.J.; Daellenbach, K.K.; Sullivan, G.P.
1993-06-01
The US Air Force Space Command has tasked the Pacific Northwest Laboratory, as the lead laboratory supporting the US Department of Energy Federal Energy Management Program, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is a model program PNL is designing for federal customers served by the Pacific Gas and Electric Company (PG and E). The primary goal of the VAFB project is to identify all electric energy efficiency opportunities, and to negotiate with PG and E to acquire those resources through a customized demand-side management program for its federal clients. That customized program should have three major characteristics: (1) 100% up-front financing; (2) substantial utility cost-sharing; and (3) utility implementation through energy service companies under contract to the utility. A similar arrangement will be pursued with Southern California Gas for non-electric resource opportunities if that is deemed desirable by the site and if the gas utility seems open to such an approach. This report documents the assessment of baseline energy use at VAFB located near Lompoc, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Resource Assessment. This analysis examines the characteristics of electric, natural gas, fuel oil, and propane use for fiscal year 1991. It records energy-use intensities for the facilities at VAFB by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A more complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, and applicable losses.
Dreisbach, R. L. (Editor)
1979-01-01
The input data and execution control statements for the ATLAS integrated structural analysis and design system are described. It is operational on the Control Data Corporation (CDC) 6600/CYBER computers in a batch mode or in a time-shared mode via interactive graphic or text terminals. ATLAS is a modular system of computer codes with common executive and data base management components. The system provides an extensive set of general-purpose technical programs with analytical capabilities including stiffness, stress, loads, mass, substructuring, strength design, unsteady aerodynamics, vibration, and flutter analyses. The sequence and mode of execution of selected program modules are controlled via a common user-oriented language.
Finite volume method room acoustic simulations integrated into the architectural design process
DEFF Research Database (Denmark)
Pind Jörgensson, Finnur Kári; Jeong, Cheol-Ho; Engsig-Karup, Allan Peter
2017-01-01
with the architectural design from the earliest design stage, as a part of a holistic design process. A new procedure to integrate room acoustics into architectural design is being developed in a Ph.D. project, with the aim of promoting this early stage holistic design process. This project aims to develop a new hybrid......In many cases, room acoustics are neglected during the early stage of building design. This can result in serious acoustical problems that could have been easily avoided and can be difficult or expensive to remedy at later stages. Ideally, the room acoustic design should interact...
Responsible science: Ensuring the integrity of the research process, volume 1
This report thoughtfully examines the challenges posed in ensuring that the search for truth reflects adherence to ethical standards. In recent years, we have learned, sometimes painfully, that not all scientists adhere to this obligation. Reports of falsified research results and plagiarism involving both junior and senior scientists have stimulated doubts and criticism about the ways in which misconduct in science is addressed by the research community. Misconduct in science is now being publicly examined in all of its aspects; how misconduct is defined, the process by which misconduct is discovered, and procedures for judging innocence or guilt and assessing penalties. Also being explored are the appropriate roles of individuals, research institutions, journals, government research agencies, and the legal system. Issues of misconduct and integrity in science present complex questions. These issues require the sustained attention of all members of the research community as well as of leaders in the public and private sector who are concerned with safeguarding the health of science. In this regard ensuring the integrity of the research process is similar to assuring safety in the workplace: it is a process that requires continued participation from all levels of the entire research enterprise--the practitioners, the host institutions, the sponsors in government, and the legislators who provide the funds.
Notti, J. E.; Cormack, A., III; Schmill, W. C.
1974-01-01
An Integrated Power/Attitude Control System (IPACS) concept consisting of an array of spinning flywheels, with or without gimbals, capable of performing the dual function of power storage and generation, as well as attitude control has been investigated. This system provides attitude control through momentum storage, and replaces the storage batteries onboard the spacecraft. The results of the investigation are presented in two volumes. The trade-off studies performed to establish the feasibility, cost effectiveness, required level of development, and boundaries of application of IPACS to a wide variety of spacecraft are discussed. The conceptual designs for a free-flying research application module (RAM), and for a tracking and data relay satellite (TDRS) are presented. Results from dynamic analyses and simulations of the IPACS conceptual designs are included.
Sayed, Sadeed Bin
2014-07-01
A marching on-in-time (MOT)-based time domain volume electric field integral equation (TD-VEFIE) solver is proposed for accurate and stable analysis of electromagnetic wave interactions on high-contrast scatterers. The stability is achieved using band-limited but two-sided (non-causal) temporal interpolation functions and an extrapolation scheme to cast the time marching into a causal form. The extrapolation scheme is designed to be highly accurate for oscillating and exponentially decaying fields, hence it accurately captures the physical behavior of the resonant modes that are excited inside the dielectric scatterer. Numerical results demonstrate that the resulting MOT scheme maintains its stability as the number of resonant modes increases with the contrast of the scatterer.
Institute of Scientific and Technical Information of China (English)
杨素国; 章建全; 杨钰
2012-01-01
Objective To investigate the difference of volume calculation accuracy between three-dimensional volumetry and two dimensional formulization by using ultrasonography on experimental models. Methods A pare of 19 balloon models were set up in group A and group B. The balloons were filled in 19 different matching scales of amount, with saline in group A and with SonoVue micro-bubbles solution in group B. They were sealed and embedded in ultrasound gel container for ultrasound scanning. For three-dimensional data acquisition, an RAB 2-5-D probe available on Voluson-E8 ultrasound set (GE medical Co. , America) was used. The intrinsic VOCAL technique was applied for processing the volume data in a subtle rotation step of 6 degrees to yield the volume value of each balloon (i. e. 3D-volume) , and meanwhile multi-planar technique was used to produce three perpendicular planes for maximum length determinations. The three lengths for each balloon were citated for volume calculation based on spheroid formula (i. e. 2D-volume). Results 3D-volume and 2D-vol-ume were successfully calculated concomitantly for each balloon. 3D-volume value was highly close to the actual amount of filling liquid in each balloon, with superiority in group A. 2D-volume value was biased in over-estimation to the actual a-mount of filling liquid in each balloon, especially in group B. The bias of 2D volumetry was greater than that of 3D volumetry in a significant statistical difference ( t =5. 4913, P <0. 001). 3D volume values between group A and group B were proved in a mean difference of (12. 33 ± 7. 67) ml ( t =7. 008, P <0. 001) with the values greater in group B. Conclusion 3D-volumetry with VOCAL software can help achieve volumes much closer to the actual volume of object than 2D-volume-try. Proper and precise delineation along the inner border of region of interest is essential and critical while performing VOCAL processing.%目的 探讨三维超声重建法计算体积的
Van Der Schijff, Hermanus P.
Variable air volume (VAV) air terminals are designed to save energy by reducing airflow into a given space based on occupancy and required load. Systems are typically designed to operate at peak load, however as load is reduced, performance is compromised due to inadequate throw. As a result, fans are installed to adjust for the losses, negating many of the energy savings. Additionally flow is vectored by the use of vanes, a basic passive type of flow control. An experimental investigation was performed to study the application of flow control on that of a HVAC diffuser using synthetic jets distributed evenly along the diffuser edge parallel to the flow field. The study was conducted on a 1:3 scale typical office space (150 ft2), which included a simulated scale HVAC system supplied by compressed air. Two different jet blowing ratios were investigated for system loads of 60% and 90%. The flow field was established using hot wire anemometry and Particle Image Velocimetry (PIV). This study demonstrates the effectiveness of synthetic jet based active flow control at controlling airflow, showing ability to affect throw parameters for changing flow rates within the test chamber. Vectoring of up to 20% and improvement in jet spread of 200% was demonstrated. The use of such devices has the potential to improve air quality and air distribution in building while simultaneously lowering energy demands of HVAC systems.
Energy Technology Data Exchange (ETDEWEB)
Denney, R.D.
1995-10-01
The CPP-603 Underwater Fuel Storage Facility (UFSF) Site Integrated Stabilization Management Plan (SISMP) has been constructed to describe the activities required for the relocation of spent nuclear fuel (SNF) from the CPP-603 facility. These activities are the only Idaho National Engineering Laboratory (INEL) actions identified in the Implementation Plan developed to meet the requirements of the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 94-1 to the Secretary of Energy regarding an improved schedule for remediation in the Defense Nuclear Facilities Complex. As described in the DNFSB Recommendation 94-1 Implementation Plan, issued February 28, 1995, an INEL Spent Nuclear Fuel Management Plan is currently under development to direct the placement of SNF currently in existing INEL facilities into interim storage, and to address the coordination of intrasite SNF movements with new receipts and intersite transfers that were identified in the DOE SNF Programmatic and INEL Environmental Restoration and Waste Management Environmental Impact Statement Record, of Decision. This SISMP will be a subset of the INEL Spent Nuclear Fuel Management Plan and the activities described are being coordinated with other INEL SNF management activities. The CPP-603 relocation activities have been assigned a high priority so that established milestones will be meet, but there will be some cases where other activities will take precedence in utilization of available resources. The Draft INEL Site Integrated Stabilization Management Plan (SISMP), INEL-94/0279, Draft Rev. 2, dated March 10, 1995, is being superseded by the INEL Spent Nuclear Fuel Management Plan and this CPP-603 specific SISMP.
Kashima, Susumu; Nishihara, Minoru; Takemoto, Yoshihiro; Osawa, Toshihiko
1990-09-01
The laser scattering characteristics from tissue microvasculature have been made clear by means of theoretical and experimental approaches. Our results show that the integrated intensity of the power spectrum correlates linearly with the volume of red blood cells in a given tissue provided the average collision number (\\bar{m}) between photons and moving red blood cells is less than unity. Also, the integrated intensity of the power spectrum is proportional to tissue blood volume if the density of red blood cells in blood (hematocrit) is constant.
Energy Technology Data Exchange (ETDEWEB)
Ken, S.; Vieillevigne, L.; Cohen-Jonathan, E.M.; Laprie, A. [Departement de radiotherapie, institut Claudius-Regaud, 31 - Toulouse (France); Ken, S.; Franceries, X.; Lotterie, J.A.; Lubrano, V.; Catalaa, I.; Celsis, P.; Berry, I.; Laprie, A. [Inserm UMR 825 Imagerie cerebrale et handicaps neurologiques, 31 - Toulouse (France); Lotterie, J.A.; Lubrano, V.; Berry, I. [Departement de biophysique, centre hospitalier universitaire de Rangueil, 31 - Toulouse (France); Catalaa, I. [Departement de radiologie, centre hospitalier universitaire de Purpan, 31 - Toulouse (France)
2010-10-15
Based on a clinic trial, the authors report the definition of a new reliable and reproducible method to delimit and integrate targets to the treatment plan which are specific to magnetic resonance spectrometry imagery for the radiotherapy of glioblastomas, in order to perform a treatment by intensity-modulated conformational radiotherapy (IMRT). A weighted conventional MRI has been performed before radiotherapy. The importation of anatomic-metabolic images into the dose planning system comprises two steps: normalization on the whole volume of magnetic resonance spectrometry imagery, and segmentation of target volumes specific to spectrometry anomalies. This integration of target volumes is thus facilitated. Short communication
Shapiro-Ilan, David I; Morales-Ramos, Juan A; Rojas, Maria G; Tedders, Walker L
2010-02-01
An alternative approach to applying entomopathogenic nematodes entails the distribution of nematodes in their infected insect hosts. Protection of the infected host from rupturing, and improving ease of handling, may be necessary to facilitate application. In this study our objective was to test the potential of a new method of formulating the infected hosts, i.e., enclosing the infected host in masking tape. Tenebrio molitor L. cadavers infected with Heterorhabditis indica Poinar, Karunakar and David or Steinernema carpocapsae (Weiser) were wrapped in tape using an automatic packaging machine; the machine was developed to reduce labor and to standardize the final product. The effects of the tape formulation on the ability to protect the cadavers from mechanical damage, nematode yield, and pest control efficacy were tested. After exposure to mechanical agitation at 7-d-post-infection, S. carpocapsae cadavers in tape were more resistant to rupture than cadavers without tape, yet H. indica cadavers 7-d-post-infection were not affected by mechanical agitation (with or without tape), nor was either nematode affected when 4-d-old cadavers were tested. Experiments indicated that infective juvenile yield was not affected by the tape formulation. Laboratory experiments were conducted measuring survival of the root weevil, Diaprepes abbreviatus (L.), or the small hive beetle, Aethina tumida Murray, after the application of two H. indica-infected hosts with or without tape per 15 cm pot (filled with soil). A greenhouse experiment was also conducted in a similar manner measuring survival of D. abbreviatus. In all experiments, both the tape and no-tape treatments caused significant reductions in insect survival relative to the control, and no differences were detected between the nematode treatments. Fifteen days post-application, the infected host treatments caused up to 78% control in A. tumida, 91% control in D. abbreviatus in the lab, and 75% in the greenhouse. These
Crystallization Formulation Lab
Federal Laboratory Consortium — The Crystallization Formulation Lab fills a critical need in the process development and optimization of current and new explosives and energetic formulations. The...
Automated drop-on-demand system with real-time gravimetric control for precise dosage formulation.
Sahay, A; Brown, M; Muzzio, F; Takhistov, Paul
2013-04-01
Many of the therapies for personalized medicine have few dosage options, and the successful translation of these therapies to the clinic is significantly dependent on the drug/formulation delivery platform. We have developed a lab-scale integrated system for microdosing of drug formulations with high accuracy and precision that is capable of feedback control. The designed modular drug dispensing system includes a microdispensing valve unit and is fully automated with a LabVIEW-controlled computer interface. The designed system is capable of dispensing drug droplets with volumes ranging from nanoliters to microliters with high accuracy (relative standard deviation gravimetric control.
Venetsanos, Dimitrios; Sederholm Lawesson, Sofia; Swahn, Eva; Alfredsson, Joakim
2017-01-01
To provide pharmacodynamic data of crushed and chewed ticagrelor tablets, in comparison with standard integral tablets. Ninety nine patients with stable angina were randomly assigned, in a 3:1:1 fashion, to one of the following 180mg ticagrelor loading dose (LD) formulations: A) Integral B) Crushed or C) Chewed tablets. Platelet reactivity (PR) was assessed with VerifyNow before, 20 and 60min after LD. High residual platelet reactivity (HRPR) was defined as >208 P2Y12 reaction units (PRU). There was no significant difference in PRU values at baseline. PRU 20min after LD were 237 (182-295), 112 (53-238) and 84 (29-129) and 60min after LD, 56 (15-150), 51 (18-85) and 9 (7-34) in integral, crushed and chewed ticagrelor LD, respectively (pintegral tablets at 20 and 60min. Crushed ticagrelor LD resulted in significantly lower PRU values compared to integral tablets at 20min whereas no difference was observed at 60min. At 20min, no patients had HRPR with chewed ticagrelor compared to 68% with integral and 30% with crushed ticagrelor LD (pintegral tablets. We also show that administration of chewed tablets is feasible and provides faster inhibition than either crushed or integral tablets. European Clinical Trial Database (EudraCT number 2014-002227-96). Copyright © 2016 Elsevier Ltd. All rights reserved.
Energy Technology Data Exchange (ETDEWEB)
Sykes, R.I.; Lewellen, W.S.; Parker, S.F.; Henn, D.S.
1989-01-01
The Second Order Closure Integrated Puff Model (SCIPUFF) is the intermediate resolution member of a hierarchy of models. It simulates the expected values of plume concentration downwind of a fossil-fueled power plant stack, along with an estimate of the variation around this value. To represent the turbulent atmosphere surrounding the plume compatibly with available meteorological data, a second order closure sub-model is used. SCIPUFF represents the plume by a series of Gaussian puffs, typically 10 seconds apart; plume growth is calculated by a random walk phase combined with plume expansion calculated from the volume integrals of the equations used in the Stack Exhaust Model (SEM), the highest resolution model. Meteorological uncertainty is accounted for by means of extra dispersion terms. SCIPUFF was tested against more than 250 hours of plume data including both a level site and a moderately complex terrain site; approximately 200 samplers were used. Model predictions were evaluated by comparing the measured ground level concentration distribution to that simulated by the model. Further, the simulated and actual distributions of deviations between simulated or observed and expected values were compared. The predicted distributions were close to the measured ones. The overall results from SCIPUFF were similar to those from the lowest resolution model, SCIMP. The advantage of SCIPUFF is its flexibility for including future improvements. When combined with a suitable mesoscale model, SCIPUFF may be able to simulate plume dispersion beyond the 50 km limit of other available models. The ability to cover a wide range of time and space scales in a single calculation is another valuable feature. 3 refs., 10 figs., 4 tabs.
Energy Technology Data Exchange (ETDEWEB)
None
1978-06-01
Studies leading to the development of two 400 MW Offshore Thermal Energy Conversion Commercial Plants are presented. This volume includes a summary of three tasks: task IIA--systems evaluation and requirements; task IIB--evaluation plan; task III--technology review; and task IV--systems integration evaluation. Task IIA includes the definition of top level requirements and an assessment of factors critical to the selection of hull configuration and size, quantification of payload requirements and characteristics, and sensitivity of system characteristics to site selection. Task IIB includes development of a methodology for systematically evaluating the candidate hullforms, based on interrelationships and priorities developed during task IIA. Task III includes the assessment of current technology and identification of deficiencies in relation to OTEC requirements and the development of plans to correct such deficiencies. Task IV involves the formal evaluation of the six candidate hullforms in relation to sit and plant capacity to quantify cost/size/capability relationships, leading to selection of an optimum commercial plant. (WHK)
Feki, Saber
2013-07-01
An explicit marching-on-in-time (MOT)-based time-domain volume integral equation (TDVIE) solver has recently been developed for characterizing transient electromagnetic wave interactions on arbitrarily shaped dielectric bodies (A. Al-Jarro et al., IEEE Trans. Antennas Propag., vol. 60, no. 11, 2012). The solver discretizes the spatio-temporal convolutions of the source fields with the background medium\\'s Green function using nodal discretization in space and linear interpolation in time. The Green tensor, which involves second order spatial and temporal derivatives, is computed using finite differences on the temporal and spatial grid. A predictor-corrector algorithm is used to maintain the stability of the MOT scheme. The simplicity of the discretization scheme permits the computation of the discretized spatio-temporal convolutions on the fly during time marching; no \\'interaction\\' matrices are pre-computed or stored resulting in a memory efficient scheme. As a result, most often the applicability of this solver to the characterization of wave interactions on electrically large structures is limited by the computation time but not the memory. © 2013 IEEE.
SRC burn test in 700-hp oil-designed boiler. Volume 1. Integrated report. Final technical report
Energy Technology Data Exchange (ETDEWEB)
1983-09-01
This burn test program was conducted during the period of August 1982 to February 1983 to demonstrate that Solvent Refined Coal (SRC) products can displace petroleum as a boiler fuel in oil- and gas-designed boilers. The test program was performed at the U.S. Department of Energy's Pittsburgh Energy Technology Center (PETC). Three forms of SRC (pulverized SRC, a solution of SRC dissolved in process-derived distillates, and a slurry of SRC and water) and No. 6 Fuel Oil were evaluated in the 700-hp (30 x 10/sup 6/ Btu/hour) watertube, oil-designed boiler facility at PETC. The test program was managed by the International Coal Refining Company (ICRC) and sponsored by the Department of Energy. Other organizations were involved as necessary to provide the expertise required to execute the test program. This final report represents an integrated overview of the test program conducted at PETC. More detailed information with preliminary data can be obtained from separate reports prepared by PETC, Southern Research Institute, Wheelabrator-Frye, Babcock and Wilcox, and Combustion Engineering. These are presented as Annex Volumes A-F. 25 references, 41 figures, 15 tables.
An explicit marching on-in-time solver for the time domain volume magnetic field integral equation
Sayed, Sadeed Bin
2014-07-01
Transient scattering from inhomogeneous dielectric objects can be modeled using time domain volume integral equations (TDVIEs). TDVIEs are oftentimes solved using marching on-in-time (MOT) techniques. Classical MOT-TDVIE solvers expand the field induced on the scatterer using local spatio-temporal basis functions. Inserting this expansion into the TDVIE and testing the resulting equation in space and time yields a system of equations that is solved by time marching. Depending on the type of the basis and testing functions and the time step, the time marching scheme can be implicit (N. T. Gres, et al., Radio Sci., 36(3), 379-386, 2001) or explicit (A. Al-Jarro, et al., IEEE Trans. Antennas Propag., 60(11), 5203-5214, 2012). Implicit MOT schemes are known to be more stable and accurate. However, under low-frequency excitation, i.e., when the time step size is large, they call for inversion of a full matrix system at very time step.
Mishra, Saurabh M; Rohera, Bhagwan D
2016-06-27
The objective of the present study was to design and develop a formulation for orally disintegrating tablets (ODTs) of carbamazepine using quality by design principles. The target product profile (TPP) and quality target product profile (QTPP) of ODTs were identified. Risk assessment was carried out by leveraging prior knowledge and experience to define the criticality of factors based on their impact by Ishikawa fishbone diagram and preliminary hazard analysis tool. Box-Behnken response surface methodology was used to study the effect of critical factors on various attributes of ODTs. The independent factors selected were compression pressure (X1), concentration of sublimating agent (volatile material) (X2), disintegrant concentration (X3) and the responses were tablet crushing strength, tablet porosity, disintegration time, water absorption time, tablet friability and drug dissolution. ANOVA and lack of fit test illustrated that selected independent variables had significant effect on the response variables, and excellent correlation was observed between actual and predicted values. Optimization by desirability function indicated that compression pressure, X1 (1534 lbs), ammonium bicarbonate concentration, X2 (7.68%) and Kollidon(®) CL-SF concentration, X3 (6%) were optimum to prepare ODT formulation of carbamazepine of desired attributes complying with QTPP. Thus, in the present study, a high level of assurance was established for ODT product quality and performance.
DEFF Research Database (Denmark)
Berthelsen, Anne Kiil; Dobbs, Jane; Kjellén, Elisabeth
2007-01-01
The optimal definition of the size, shape and location of gross tumour volume is one of the most important steps in the planning of radiation therapy, and necessitates a proper understanding of the procedure from both the oncologic radiologist and the radiation oncologist. This overview reports o...
Control-volume representation of molecular dynamics.
Smith, E R; Heyes, D M; Dini, D; Zaki, T A
2012-05-01
A molecular dynamics (MD) parallel to the control volume (CV) formulation of fluid mechanics is developed by integrating the formulas of Irving and Kirkwood [J. Chem. Phys. 18, 817 (1950)] over a finite cubic volume of molecular dimensions. The Lagrangian molecular system is expressed in terms of an Eulerian CV, which yields an equivalent to Reynolds' transport theorem for the discrete system. This approach casts the dynamics of the molecular system into a form that can be readily compared to the continuum equations. The MD equations of motion are reinterpreted in terms of a Lagrangian-to-control-volume (LCV) conversion function ϑ(i) for each molecule i. The LCV function and its spatial derivatives are used to express fluxes and relevant forces across the control surfaces. The relationship between the local pressures computed using the volume average [Lutsko, J. Appl. Phys. 64, 1152 (1988)] techniques and the method of planes [Todd et al., Phys. Rev. E 52, 1627 (1995)] emerges naturally from the treatment. Numerical experiments using the MD CV method are reported for equilibrium and nonequilibrium (start-up Couette flow) model liquids, which demonstrate the advantages of the formulation. The CV formulation of the MD is shown to be exactly conservative and is, therefore, ideally suited to obtain macroscopic properties from a discrete system.
Energy Technology Data Exchange (ETDEWEB)
Merlin, Thibaut, E-mail: thibaut.merlin@telecom-bretagne.eu [Université Bordeaux INCIA, CNRS UMR 5287, Hôpital de Bordeaux , Bordeaux 33 33076 (France); Visvikis, Dimitris [INSERM, UMR1101, LaTIM, Université de Bretagne Occidentale, Brest 29 29609 (France); Fernandez, Philippe; Lamare, Frederic [Université Bordeaux INCIA, CNRS UMR 5287, Hôpital de Bordeaux, Bordeaux 33 33076 (France)
2015-02-15
Purpose: Partial volume effect (PVE) plays an important role in both qualitative and quantitative PET image accuracy, especially for small structures. A previously proposed voxelwise PVE correction method applied on PET reconstructed images involves the use of Lucy–Richardson deconvolution incorporating wavelet-based denoising to limit the associated propagation of noise. The aim of this study is to incorporate the deconvolution, coupled with the denoising step, directly inside the iterative reconstruction process to further improve PVE correction. Methods: The list-mode ordered subset expectation maximization (OSEM) algorithm has been modified accordingly with the application of the Lucy–Richardson deconvolution algorithm to the current estimation of the image, at each reconstruction iteration. Acquisitions of the NEMA NU2-2001 IQ phantom were performed on a GE DRX PET/CT system to study the impact of incorporating the deconvolution inside the reconstruction [with and without the point spread function (PSF) model] in comparison to its application postreconstruction and to standard iterative reconstruction incorporating the PSF model. The impact of the denoising step was also evaluated. Images were semiquantitatively assessed by studying the trade-off between the intensity recovery and the noise level in the background estimated as relative standard deviation. Qualitative assessments of the developed methods were additionally performed on clinical cases. Results: Incorporating the deconvolution without denoising within the reconstruction achieved superior intensity recovery in comparison to both standard OSEM reconstruction integrating a PSF model and application of the deconvolution algorithm in a postreconstruction process. The addition of the denoising step permitted to limit the SNR degradation while preserving the intensity recovery. Conclusions: This study demonstrates the feasibility of incorporating the Lucy–Richardson deconvolution associated with a
Chobanyan, E.; Ilić, M. M.; Notaroš, B. M.
2015-05-01
A novel double-higher-order entire-domain volume integral equation (VIE) technique for efficient analysis of electromagnetic structures with continuously inhomogeneous dielectric materials is presented. The technique takes advantage of large curved hexahedral discretization elements—enabled by double-higher-order modeling (higher-order modeling of both the geometry and the current)—in applications involving highly inhomogeneous dielectric bodies. Lagrange-type modeling of an arbitrary continuous variation of the equivalent complex permittivity of the dielectric throughout each VIE geometrical element is implemented, in place of piecewise homogeneous approximate models of the inhomogeneous structures. The technique combines the features of the previous double-higher-order piecewise homogeneous VIE method and continuously inhomogeneous finite element method (FEM). This appears to be the first implementation and demonstration of a VIE method with double-higher-order discretization elements and conformal modeling of inhomogeneous dielectric materials embedded within elements that are also higher (arbitrary) order (with arbitrary material-representation orders within each curved and large VIE element). The new technique is validated and evaluated by comparisons with a continuously inhomogeneous double-higher-order FEM technique, a piecewise homogeneous version of the double-higher-order VIE technique, and a commercial piecewise homogeneous FEM code. The examples include two real-world applications involving continuously inhomogeneous permittivity profiles: scattering from an egg-shaped melting hailstone and near-field analysis of a Luneburg lens, illuminated by a corrugated horn antenna. The results show that the new technique is more efficient and ensures considerable reductions in the number of unknowns and computational time when compared to the three alternative approaches.
IT Supporting Strategy Formulation
Achterbergh, J.M.I.M.
2005-01-01
This overview approaches information and communication technology (ICT) for competitive intelligence from the perspective of strategy formulation. It provides an ICT architecture for supporting the knowledge processes producing relevant knowledge for strategy formulation. To determine what this arch
IT Supporting Strategy Formulation
Achterbergh, J.M.I.M.
2005-01-01
This overview approaches information and communication technology (ICT) for competitive intelligence from the perspective of strategy formulation. It provides an ICT architecture for supporting the knowledge processes producing relevant knowledge for strategy formulation. To determine what this arch
Frohlich, Clifford A.
1992-11-01
When seismic events occur in spatially compact clusters, the volume and geometric characteristics of these clusters often provides information about the relative effectiveness of different location methods, or about physical processes occurring within the hypocentral region. This report defines and explains how to determine the convex polyhedron of minimum volume (CPMV) surrounding a set of points. We evaluate both single-event and joint hypocenter determination (JHD) relocations for three rather different clusters of seismic events: (1) nuclear explosions from Muroroa relocated using P and PKP phases reported by the ISC; (2) intermediate depth earthquakes near Bucaramanga, Colombia, relocated using P and PKP phases reported by the ISC; and (3) shallow earthquakes near Vanuatu (formerly, the New Hebrides), relocated using P and S phases from a local station network. This analysis demonstrates that different location methods markedly affect the volume of the CPMV, however, volumes for JHD relations are not always smaller than volumes for single-event relocations.
Torsion formulation of gravity
Energy Technology Data Exchange (ETDEWEB)
Lledo, M A; Sommovigo, L, E-mail: Maria.Lledo@ific.uv.e, E-mail: Luca.Sommovigo@mfn.unipmn.i [Departament de Fisica Teorica, Universitat de Valencia, and IFIC (Centro mixto CSIC-UVEG) C/Dr Moliner, 50, E-46100 Burjassot (Valencia) (Spain)
2010-03-21
We explain precisely what it means to have a connection with torsion as a solution of the Einstein equations. While locally the theory remains the same, the new formulation allows for topologies that would have been excluded in the standard formulation of gravity. In this formulation it is possible to couple arbitrary torsion to gauge fields without breaking the gauge invariance.
1990-09-30
and IDEFIX integration methodology. ONTEK Responsible for defining and testing a representative integrated system base in Artificial Intelligence...Reference Manual UM620341100 Neutral Data Definition Language (NDDL) User’s Guide UM620341002 Information Modeling Manual - IDEFI- Extended ( IDEFIX
DEFF Research Database (Denmark)
Emerek, Ruth
2004-01-01
Bidraget diskuterer de forskellige intergrationsopfattelse i Danmark - og hvad der kan forstås ved vellykket integration......Bidraget diskuterer de forskellige intergrationsopfattelse i Danmark - og hvad der kan forstås ved vellykket integration...
Gómez Rodríguez, Rafael Ángel
2014-01-01
To say that someone possesses integrity is to claim that that person is almost predictable about responses to specific situations, that he or she can prudentially judge and to act correctly. There is a closed interrelationship between integrity and autonomy, and the autonomy rests on the deeper moral claim of all humans to integrity of the person. Integrity has two senses of significance for medical ethic: one sense refers to the integrity of the person in the bodily, psychosocial and intellectual elements; and in the second sense, the integrity is the virtue. Another facet of integrity of the person is la integrity of values we cherish and espouse. The physician must be a person of integrity if the integrity of the patient is to be safeguarded. The autonomy has reduced the violations in the past, but the character and virtues of the physician are the ultimate safeguard of autonomy of patient. A field very important in medicine is the scientific research. It is the character of the investigator that determines the moral quality of research. The problem arises when legitimate self-interests are replaced by selfish, particularly when human subjects are involved. The final safeguard of moral quality of research is the character and conscience of the investigator. Teaching must be relevant in the scientific field, but the most effective way to teach virtue ethics is through the example of the a respected scientist.
Cardoso, Ariela M; Horn, Martha B; Ferret, Lizete S; Azevedo, Carla M N; Pires, Marçal
2015-04-28
Several researchers have reported zeolite synthesis using coal ash for a wide range of applications. However, little attention has been given to green processes, including moderate synthesis conditions, using waste as raw material and effluent reuse or reduction. In this study, Brazilian coal fly ashes were used for integrated synthesis of zeolites 4A and Na-P1 by two different routes and under moderate operating conditions (temperature and pressure). Both procedures produced zeolites with similar conversions (zeolite 4A at 82% purity and zeolite Na-P1 at 57-61%) and high CEC values (zeolites 4A: 4.5meqCa(2+)g(-1) and zeolites Na-P1: 2.6-2.8meqNH4(+)g(-1)). However, process 1 generated less effluent for the zeolite mass produced (7mLg(-1)), with low residual Si and Al levels and 74% of the Si available in the coal fly ash incorporated into the zeolite, while only 55% is used in process 2. For use as a builder in detergents, synthetic zeolite 4A exhibited conformity parameters equal to or greater than those of the commercial zeolite adopted as reference. Treatment of swine wastewater with zeolite Na-P1 resulted in a high removal capacity for total ammoniacal nitrogen (31mgg(-1)).
Shao, K; Morisset, A; Pouget, V; Faraud, E; Larue, C; Lewis, D; McMorrow, D
2011-11-01
We have performed three-dimensional characterization of the TPA effective laser spot size in silicon using an integrated knife-edge sensor. The TPA-induced response of a CMOS integrated circuit is analyzed based on these results and compared to simulation; we have found that the charge injection capacity in IC's active layer could be influenced by irradiance energy and focus depth.
He, Lianyi
2016-10-01
We present a standard field theoretical derivation of the dynamic density and spin linear response functions of a dilute superfluid Fermi gas in the BCS-BEC crossover in both three and two dimensions. The derivation of the response functions is based on the elegant functional path integral approach which allows us to calculate the density-density and spin-spin correlation functions by introducing the external sources for the density and the spin density. Since the generating functional cannot be evaluated exactly, we consider two gapless approximations which ensure a gapless collective mode (Goldstone mode) in the superfluid state: the BCS-Leggett mean-field theory and the Gaussian-pair-fluctuation (GPF) theory. In the mean-field theory, our results of the response functions agree with the known results from the random phase approximation. We further consider the pair fluctuation effects and establish a theoretical framework for the dynamic responses within the GPF theory. We show that the GPF response theory naturally recovers three kinds of famous diagrammatic contributions: the Self-Energy contribution, the Aslamazov-Lakin contribution, and the Maki-Thompson contribution. We also show that unlike the equilibrium state, in evaluating the response functions, the linear (first-order) terms in the external sources as well as the induced order parameter perturbations should be treated carefully. In the superfluid state, there is an additional order parameter contribution which ensures that in the static and long wavelength limit, the density response function recovers the result of the compressibility (compressibility sum rule). We expect that the f-sum rule is manifested by the full number equation which includes the contribution from the Gaussian pair fluctuations. The dynamic density and spin response functions in the normal phase (above the superfluid critical temperature) are also derived within the Nozières-Schmitt-Rink (NSR) theory.
Yao, Dezhong
2017-02-14
Currently, average reference is one of the most widely adopted references in EEG and ERP studies. The theoretical assumption is the surface potential integral of a volume conductor being zero, thus the average of scalp potential recordings might be an approximation of the theoretically desired zero reference. However, such a zero integral assumption has been proved only for a spherical surface. In this short communication, three counter-examples are given to show that the potential integral over the surface of a dipole in a volume conductor may not be zero. It depends on the shape of the conductor and the orientation of the dipole. This fact on one side means that average reference is not a theoretical 'gold standard' reference, and on the other side reminds us that the practical accuracy of average reference is not only determined by the well-known electrode array density and its coverage but also intrinsically by the head shape. It means that reference selection still is a fundamental problem to be fixed in various EEG and ERP studies.
Explosive Formulation Pilot Plant
Federal Laboratory Consortium — The Pilot Plant for Explosive Formulation supports the development of new explosives that are comprised of several components. This system is particularly beneficial...
Knowlton, Kelly; Andrews, Jane C.
2006-01-01
(Ozone Monitoring Instrument) and TES (Tropospheric Emission Spectrometer) air quality data for the RPOs by comparing OMI and TES data with ground-based data that are acquired during identified episodes of air pollution. The air quality data from OMI and TES are of different spectral ranges than data from satellites currently included in FASTNET, giving them potential advantages over the existing satellites. If the OMI and TES data are shown to be useful to the RPOs, they would then be integrated into the FASTNET DST for use on an operational basis.
Energy Technology Data Exchange (ETDEWEB)
Lowrie, J.W.; Fermelia, A.J.; Haley, D.C.; Gremban, K.D.; Vanbaalen, J.
1982-09-01
A variety of artificial intelligence techniques which could be used with regard to NASA space applications and robotics were evaluated. The techniques studied were decision tree manipulators, problem solvers, rule based systems, logic programming languages, representation language languages, and expert systems. The overall structure of a robotic simulation tool was defined and a framework for that tool developed. Nonlinear and linearized dynamics equations were formulated for n link manipulator configurations. A framework for the robotic simulation was established which uses validated manipulator component models connected according to a user defined configuration.
Energy Technology Data Exchange (ETDEWEB)
Lewis, L R; LaFevers, J R; Perry, A O; Rice, W Jr
1976-12-01
This bibliography has been compiled for use by planners who, within their areas of responsibility, deal with the problems presented by surface mining and reclamation. Every effort has been made to identify and to annotate those entries considered most useful in the development of plans for reclamation and after-mining land use. The coverage of varied surface mining and reclamation studies is intended to access the reader to documents and works related to legal, economic, and technological aspects: materials that treat with procedural, planning, and regulatory factors pertaining to land use and reclamation. The technical level of each annotated entry has been assessed to rank skills required for the comprehension and utilization of the work in question. This bibliography has been formulated to be used as a tool by municipal, county, and regional planners in a field of study in which guidelines are as yet few and diverse in approach.
Energy Technology Data Exchange (ETDEWEB)
Prickett, W. Z.
1979-11-01
The design requirements for the Nuclear Integrated Multimission Spacecraft. (NIMS) are discussed in detail. The requirements are a function of mission specifications, payload, control system requirements, electric system specifications, and cost limitations. (LCL)
1990-09-30
Responsible for providing software information services for the Common Data Model and IDEFIX integration methodology. ONTEK Responsible for defining and...contains a Conceptual Schema IDEFIX model used as an example throughout this manual. APPENDIX D, SAMPLE COBOL PROGRAMS This appendix consists of COBOL... IDEFIX is the extended version of IDEF1. Integrated Information Support System - (IISS) A test computing environment used to investigate, demonstrate and
1990-09-30
Common Data Model and IDEFIX integration methodology. ONTEK Responsible for defining and testing a representative integrated system base in Artificial...information at the next lower level. IRD620341500 30 Septenbt’r 1990 IDEFIX DEFINITION DEFINITION ---------------------- defines &t describes I I 9...category entities). Sub-type categories may be defined as complete or incomplete. Layer 2 - The CDM1 The CDM1 is the schema definition ( IDEFiX model
Formulations in first encounters
A. Hak (Tony); F. de Boer (Fijgje)
1994-01-01
markdownabstractThe paper describes and compares the use and function of the formulation--decision pair in three types of diagnostic interviewing. The investigatory type of interviewing, which typically occurs in the medical interview, is characterized by the absence of formulations. In the explora
Energy Technology Data Exchange (ETDEWEB)
Grimalt, Joan O.; Carrizo, Daniel; Otero, Raquel; Vizcaino, Esther [Institute of Environmental Assessment and Water Research (IDAeA-CSIC), Department of Environmental Chemistry, Barcelona, Catalonia (Spain); Howsam, Mike [Universite de Lille 2, Centre Universitaire de Mesure et d' Analyse, Faculte de Pharmacie, Lille (France); Rodrigues de Marchi, Mary Rosa [Institute of Chemistry UNESP, Department of Analytical Chemistry, Araraquara, SP (Brazil)
2010-03-15
A rapid, robust and economical method for the analysis of persistent halogenated organic compounds in small volumes of human serum and umbilical cord blood is described. The pollutants studied cover a broad range of molecules of contemporary epidemiological and legislative concern, including polychlorobiphenyls (PCBs), polychlorobenzenes (CBs), hexachlorocyclohexanes (HCHs), DDTs, polychlorostyrenes (PCSs) and polybromodiphenyl ethers (PBDEs). Extraction and clean-up with n-hexane and concentrated sulphuric acid was followed with analysis by gas chromatography coupled to electron capture (GC-ECD) and GC coupled to negative ion chemical ionisation mass spectrometry (GC-NICI-MS). The advantages of this method rest in the broad range of analytes and its simplicity and robustness, while the use of concentrated sulphuric acid extraction/clean-up destroys viruses that may be present in the samples. Small volumes of reference serum between 50 and 1000{mu}L were extracted and the limits of detection/quantification and repeatability were determined. Recoveries of spiked compounds for the extraction of small volumes ({>=}300 {mu}L) of the spiked reference serum were between 90% and 120%. The coefficients of variation of repeatability ranged from 0.1-14%, depending on the compound. Samples of 4-year-old serum and umbilical cord blood (n=73 and 40, respectively) from a population inhabiting a village near a chloro-alkali plant were screened for the above-mentioned halogenated pollutants using this method and the results are briefly described. (orig.)
Formulating research methods for information systems v.1
Willcocks, Leslie P; Lacity, Mary C
2015-01-01
This edited two-volume collection presents the most interesting and compelling articles pertaining to the formulation of research methods used to study information systems from the 30-year publication history of the Journal of Information Technology.
Kemp, Victoria R.
1992-01-01
A fluid-dynamic, digital-transient computer model of an integrated, parallel propulsion system was developed for the CDC mainframe and the SUN workstation computers. Since all STME component designs were used for the integrated system, computer subroutines were written characterizing the performance and geometry of all the components used in the system, including the manifolds. Three transient analysis reports were completed. The first report evaluated the feasibility of integrated engine systems in regards to the start and cutoff transient behavior. The second report evaluated turbopump out and combined thrust chamber/turbopump out conditions. The third report presented sensitivity study results in staggered gas generator spin start and in pump performance characteristics.
Energy Technology Data Exchange (ETDEWEB)
CARTER, R.P.
2000-04-04
DOE Policy 450.4 mandates that safety be integrated into all aspects of the management and operations of its facilities. The goal of an institutionalized Integrated Safety Management System (ISMS) is to have a single integrated system that includes Environment, Safety, and Health requirements in the work planning and execution processes to ensure the protection of the worker, public, environment, and the federal property over the life cycle of the Environmental Restoration (ER) Project. The purpose of this Environmental Restoration Contractor (ERC) ISMS Phase MI Verification was to determine whether ISMS programs and processes were institutionalized within the ER Project, whether these programs and processes were implemented, and whether the system had promoted the development of a safety conscious work culture.
Saygin, Zeynep M; Norton, Elizabeth S; Osher, David E; Beach, Sara D; Cyr, Abigail B; Ozernov-Palchik, Ola; Yendiki, Anastasia; Fischl, Bruce; Gaab, Nadine; Gabrieli, John D E
2013-08-14
Developmental dyslexia, an unexplained difficulty in learning to read, has been associated with alterations in white matter organization as measured by diffusion-weighted imaging. It is unknown, however, whether these differences in structural connectivity are related to the cause of dyslexia or if they are consequences of reading difficulty (e.g., less reading experience or compensatory brain organization). Here, in 40 kindergartners who had received little or no reading instruction, we examined the relation between behavioral predictors of dyslexia and white matter organization in left arcuate fasciculus, inferior longitudinal fasciculus, and the parietal portion of the superior longitudinal fasciculus using probabilistic tractography. Higher composite phonological awareness scores were significantly and positively correlated with the volume of the arcuate fasciculus, but not with other tracts. Two other behavioral predictors of dyslexia, rapid naming and letter knowledge, did not correlate with volumes or diffusion values in these tracts. The volume and fractional anisotropy of the left arcuate showed a particularly strong positive correlation with a phoneme blending test. Whole-brain regressions of behavioral scores with diffusion measures confirmed the unique relation between phonological awareness and the left arcuate. These findings indicate that the left arcuate fasciculus, which connects anterior and posterior language regions of the human brain and which has been previously associated with reading ability in older individuals, is already smaller and has less integrity in kindergartners who are at risk for dyslexia because of poor phonological awareness. These findings suggest a structural basis of behavioral risk for dyslexia that predates reading instruction.
Younes, Badri A.; Schier, James S.
2010-01-01
The SCaN Program has defined an integrated network architecture that fully meets the Administrator s mandate to the Program, and will result in a NASA infrastructure capable of providing the needed and enabling communications services to future space missions. The integrated network architecture will increase SCaN operational efficiency and interoperability through standardization, commonality and technology infusion. It will enable NASA missions requiring advanced communication and tracking capabilities such as: a. Optical communication b. Antenna arraying c. Lunar and Mars Relays d. Integrated network management (service management and network control) and integrated service execution e. Enhanced tracking for navigation f. Space internetworking with DTN and IP g. End-to-end security h. Enhanced security services Moreover, the SCaN Program has created an Integrated Network Roadmap that depicts an orchestrated and coherent evolution path toward the target architecture, encompassing all aspects that concern network assets (i.e., operations and maintenance, sustaining engineering, upgrade efforts, and major development). This roadmap identifies major NASA ADPs, and shows dependencies and drivers among the various planned undertakings and timelines. The roadmap is scalable to accommodate timely adjustments in response to Agency needs, goals, objectives and funding. Future challenges to implementing this architecture include balancing user mission needs, technology development, and the availability of funding within NASA s priorities. Strategies for addressing these challenges are to: define a flexible architecture, update the architecture periodically, use ADPs to evaluate options and determine when to make decisions, and to engage the stakeholders in these evaluations. In addition, the SCaN Program will evaluate and respond to mission need dates for technical and operational capabilities to be provided by the SCaN integrated network. In that regard, the architecture
DiBlasi, Angelo G.
1992-01-01
A preliminary development plan for an integrated propulsion module (IPM) is described. The IPM, similar to the Space Transportation Main engine (STME) engine, is applicable to the Advanced Launch System (ALS) baseline vehicle. The same STME development program ground rules and time schedule were assumed for the IPM. However, the unique advantages of testing an integrated engine element, in terms of reduced number of hardware and number of system and reliability tests, compared to single standalone engine and MPTA, are highlighted. The potential ability of the IPM to meet the ALS program goals for robustness, operability and reliability is emphasized.
3a micromagnetic solution by finite formulation
Energy Technology Data Exchange (ETDEWEB)
Giuffrida, C. [Politecnico di Torino, Dip. Ingegneria Elettrica, C.so Duca Abruzzi 24, I-10129 Turin (Italy); Ragusa, C. [Politecnico di Torino, Dip. Ingegneria Elettrica, C.so Duca Abruzzi 24, I-10129 Turin (Italy); Repetto, M. [Politecnico di Torino, Dip. Ingegneria Elettrica, C.so Duca Abruzzi 24, I-10129 Turin (Italy)]. E-mail: maurizio.repetto@polito.it
2006-02-01
In this paper, a method for the numerical solution of micromagnetic problems in 3D cases is presented. These problems require the solution of electromagnetic field coupled with Landau-Lifshitz-Gilbert equation, governing magnetization dynamics. Finite formulation of electromagnetic fields (FFEF) is used to compute the magnetostatic contribution to the effective field in terms of line integrals of magnetic vector potential, while integral boundary conditions are obtained computing magnetic scalar potential using magnetization values as source. Magnetization dynamics is evaluated by an implicit formulation. Results on benchmark configurations are shown.
Formulation techniques for nanofluids.
Rivera-Solorio, Carlos I; Payán-Rodríguez, Luis A; García-Cuéllar, Alejandro J; Ramón-Raygoza, E D; L Cadena-de-la-Peña, Natalia; Medina-Carreón, David
2013-11-01
Fluids with suspended nanoparticles, commonly known as nanofluids, may be formulated to improve the thermal performance of industrial heat transfer systems and applications. Nanofluids may show enhanced thermal and electrical properties such as thermal conductivity, viscosity, heat transfer coefficient, dielectric strength, etc. However, stability problems may arise as nanoparticles usually have the tendency to agglomerate and sediment producing deterioration in the increment of these properties. In this review, we discuss patents that report advances in the formulation of nanofluids including: production methods, selection of components (nanoparticles, base fluid and surfactants), their chemical compositions and morphologies, and characterization techniques. Finally, current and future directions in the development of nanofluid formulation are discussed.
Institute of Scientific and Technical Information of China (English)
蒋伟; 何正耀; 王冬海
2006-01-01
提出了一种计算无界声媒质空间中任意形状辐射体辐射声场的新方法--综合Helmholtz积分公式法(Synthetic Helmholtz Integral Equation Formulation,SHIEF).该方法将关于辐射体的内部、表面和外部Helmholtz积分方程有机地组合在一起,在已知辐射体表面法向振速的条件下,求出辐射体表面的声压分布,进而求其辐射声场分布.运用该方法计算分析了脉动球相对辐射阻抗随相对半径的变化情况,通过与理论值以及已有的其他方法(例如联立Helmholtz积分公式法(CHIEF)、超定外部Helmholtz积分公式法等)的比较,证明了该方法的正确性、准确性以及快速性,该方法有效地克服了CHIEF法和超定外部Helmholtz积分公式法的缺点.
MPDATA: An edge-based unstructured-grid formulation
Smolarkiewicz, Piotr K.; Szmelter, Joanna
2005-07-01
We present an advancement in the evolution of MPDATA (multidimensional positive definite advection transport algorithm). Over the last two decades, MPDATA has proven successful in applications using single-block structured cuboidal meshes (viz. Cartesian meshes), while employing homeomorphic mappings to accommodate time-dependent curvilinear domains. Motivated by the strengths of the Cartesian-mesh MPDATA, we develop a new formulation in an arbitrary finite-volume framework with a fully unstructured polyhedral hybrid mesh. In MPDATA, as in any Taylor-series based integration method for PDE, the choice of data structure has a pronounced impact on the technical details of the algorithm. Aiming at a broad range of applications with a large number of control-volume cells, we select a general, compact and computationally efficient, edge-based data structure. This facilitates the use of MPDATA for problems involving complex geometries and/or inhomogeneous anisotropic flows where mesh adaptivity is advantageous. In this paper, we describe the theory and implementation of the basic finite-volume MPDATA, and document extensions important for applications: a fully monotone scheme, diffusion scheme, and generalization to complete flow solvers. Theoretical discussions are illustrated with benchmark results in two and three spatial dimensions.
Saltstone Clean Cap Formulation
Energy Technology Data Exchange (ETDEWEB)
Langton, C
2005-04-22
The current operation strategy for using Saltstone Vault 4 to receive 0.2 Ci/gallon salt solution waste involves pouring a clean grout layer over the radioactive grout prior to initiating pour into another cell. This will minimize the radiating surface area and reduce the dose rate at the vault and surrounding area. The Clean Cap will be used to shield about four feet of Saltstone poured into a Z-Area vault cell prior to moving to another cell. The minimum thickness of the Clean Cap layer will be determined by the cesium concentration and resulting dose levels and it is expected to be about one foot thick based on current calculations for 0.1 Ci Saltstone that is produced in the Saltstone process by stabilization of 0.2 Ci salt solution. This report documents experiments performed to identify a formulation for the Clean Cap. Thermal transient calculations, adiabatic temperature rise measurements, pour height, time between pour calculations and shielding calculations were beyond the scope and time limitations of this study. However, data required for shielding calculations (composition and specific gravity) are provided for shielding calculations. The approach used to design a Clean Cap formulation was to produce a slurry from the reference premix (10/45/45 weight percent cement/slag/fly ash) and domestic water that resembled as closely as possible the properties of the Saltstone slurry. In addition, options were investigated that may offer advantages such as less bleed water and less heat generation. The options with less bleed water required addition of dispersants. The options with lower heat contained more fly ash and less slag. A mix containing 10/45/45 weight percent cement/slag/fly ash with a water to premix ratio of 0.60 is recommended for the Clean Cap. Although this mix may generate more than 3 volume percent standing water (bleed water), it has rheological, mixing and flow properties that are similar to previously processed Saltstone. The recommended
Directory of Open Access Journals (Sweden)
Shun Zou
2015-02-01
Full Text Available An efficient IBLF-dts scheme is proposed to integrate the bounce-back LBM and FVM scheme to solve the Navier-Stokes equations and the constitutive equation, respectively, for the simulation of viscoelastic fluid flows. In order to improve the efficiency, the bounce-back boundary treatment for LBM is introduced in to improve the grid mapping of LBM and FVM, and the two processes are also decoupled in different time scales according to the relaxation time of polymer and the time scale of solvent Newtonian effect. Critical numerical simulations have been carried out to validate the integrated scheme in various benchmark flows at vanishingly low Reynolds number with open source CFD toolkits. The results show that the numerical solution with IBLF-dts scheme agrees well with the exact solution and the numerical solution with FVM PISO scheme and the efficiency and scalability could be remarkably improved under equivalent configurations.
Dickson, Danielle M. S.; Baker, Matthew R.
2016-10-01
The North Pacific Research Board (NPRB) supports research to address pressing fishery management and ecosystem information needs in the marine waters of Alaska. Understanding dynamics at the scale of ecosystems requires integrated approaches that explore underlying mechanistic processes and interactions. It also requires analytic approaches that investigate the influence, cause, effect, and relative importance of various phenomena and drivers in determining ecosystem structure, processes and biophysical interactions. To address ecosystem-level hypotheses and questions at this scale, NPRB developed the Integrated Ecosystem Research Program (IERP). These programs employ multi-disciplinary and multi-institutional approaches to investigating ecosystem processes. The aim is to provide a basis for understanding core processes and to provide information and products that have targeted application to management priorities.
Energy Technology Data Exchange (ETDEWEB)
SHOOP, D.S.
1999-09-10
The Department of Energy policy (DOE P 450.4) is that safety is integrated into all aspects of the management and operations of its facilities. In simple and straightforward terms, the Department will ''Do work safely.'' The purpose of this River Protection Project (RPP) Integrated Safety Management System (ISMS) Phase II Verification was to determine whether ISMS programs and processes are implemented within RFP to accomplish the goal of ''Do work safely.'' The goal of an implemented ISMS is to have a single integrated system that includes Environment, Safety, and Health (ES&H) requirements in the work planning and execution processes to ensure the protection of the worker, public, environment, and federal property over the RPP life cycle. The ISMS is comprised of the (1) described functions, components, processes, and interfaces (system map or blueprint) and (2) personnel who are executing those assigned roles and responsibilities to manage and control the ISMS. Therefore, this review evaluated both the ''paper'' and ''people'' aspects of the ISMS to ensure that the system is implemented within RPP. Richland Operations Office (RL) conducted an ISMS Phase I Verification of the TWRS from September 28-October 9, 1998. The resulting verification report recommended that TWRS-RL and the contractor proceed with Phase II of ISMS verification given that the concerns identified from the Phase I verification review are incorporated into the Phase II implementation plan.
Institute of Scientific and Technical Information of China (English)
毛文贵; 韩旭; 刘桂萍
2015-01-01
In order to eliminate the numerical instability of transfer matrix method and to build a transfer matrix of nonlinear elements(bearings),the Riccati transfer matrix method was extended to the transient analysis of nonlinear rotor-bearing systems.In the method,the transfer matrix was obtained with the aid of the Newmark acceleration formulation,the deflections and velocities at the stations containing nonlinear element (bearings)were predicted by Taylor series,and then the deflections,velocities and accelerations at all stations were solved by using the Riccati transfer matrix method combined with the Newmark acceleration formulation integration according to the boundary conditions.An example of single disc rotor system was presented and the results were compared with those by a transient analysis considering linear perturbation and linear oil film force to verify the effectiveness of the proposed method.%为克服传递矩阵法数值不稳定及非线性瞬态响应分析中滑动轴承矩阵建立困难问题，提出 Riccati-New-mark 加速度传递矩阵法。借助 Newmark 加速度法建立传递矩阵，采用 Taylor 级数预估滑动轴承轴心下一时刻位移、速度建立滑动轴承矩阵；据边界条件用 Riccati 传递矩阵法求滑动轴承－转子系统非线性瞬态响应，提高数值稳定性。以单圆盘转子系统为例，与传统轴颈下一时刻位移、速度近似线性扰动处理的瞬态响应对比分析，验证此方法的有效性；讨论不同转速下线性、非线性油膜力的瞬态轨迹。
Institute of Scientific and Technical Information of China (English)
Yang Haijun; Liu Yongfu; Xie Huiwen; Xu Yongzhong; Sun Qi; Wang Shuangshuang
2013-01-01
This paper introduces horizon control,seismic control,logging control and facies control methods through the application of the least squares fitting of logging curves,seismic inversion and facies-controlled techniques.Based on the microgeology and thin section analyses,the lithology,lithofacies and periods of the Permian igneous rocks are described in detail.The seismic inversion and facies-controlled techniques were used to find the distribution characteristics of the igneous rocks and the 3D velocity volume.The least squares fitting of the logging curves overcome the problem that the work area is short of density logging data.Through analysis of thin sections,the lithofacies can be classified into eruption airfall subfacies,eruption pyroclastic flow subfacies and eruption facies.
DEFF Research Database (Denmark)
Godino, Neus; del Campo, Francisco Javier; Munoz, Francesc Xavier
2010-01-01
This work features the design, fabrication and characterisation of a miniaturised electroanalytical lab on a chip that allows the performance of a complete bioassay, from the capture of magnetic particles through their functionalisation and sample incubation to the detection of electroactive...... contains a microreactor so that various reaction and incubation steps can be carried out in isolation from the detection event with zero dead volume. This avoids contamination and fouling of the electrodes by proteins or other organic matter, and extends the useful lifetime of the detector. The system...... operation is demonstrated by a model example, consisting in the functionalisation of streptavidin-coated magnetic particles with biotinylated beta-galactosidase over periods ranging from 5 to 15 min, at which point the particles saturate. Although the system is intended for the development of enzyme...
Integrated dry NO{sub x}/SO{sub 2} emissions control system. Final report, Volume 1: Public design
Energy Technology Data Exchange (ETDEWEB)
Hunt, T.; Hanley, T.J.
1997-11-01
The U.S. Department of Energy (DOE)/Pittsburgh Energy Technology Center (PETC) and the Public Services Company of Colorado (PSCo) signed the cooperative agreement for the Integrated Dry NO{sub x}/SO{sub 2} Emissions Control System in March 1991. This project integrates various combinations of five existing and emerging technologies onto a 100 MWe, down-fired, load-following unit that burns pulverized coal. The project is expected to achieve up to 70% reductions in both oxides of nitrogen (NO{sub x}) and sulfur dioxide (SO{sub 2}) emissions. Various combinations of low-NO{sub x} burners (LNBs), overfire air (OFA) ports, selective non-catalytic reduction (SNCR), dry sorbent injection (DSI) using both calcium- and sodium-based reagents, and flue-gas humidification are expected to integrate synergistically and control both NO{sub x} and SO{sub 2} emissions better than if each technology were used alone. For instance, ammonia emissions from the SNCR system are expected to reduce NO{sub 2} emissions and allow the DSI system (sodium-based reagents) to achieve higher removals of SO{sub 2}. Unlike tangentially or wall-fired units, down-fired require substantial modification to their pressure parts to retrofit LNBs and OFA ports, substantially increasing the cost of retrofit. Conversely, the retrofitting of SNCR, DSI, or humidification systems does not require any major boiler modifications and are easily retrofitted to all boiler types. However, existing furnace geometry and flue-gas temperatures can limit their placement and effectiveness. In particular, SNCR requires injecting the SNCR chemicals into the furnace where the temperature is within a very narrow temperature range.
Energy Technology Data Exchange (ETDEWEB)
1994-09-01
As part of the Environmental Restoration Program at Martin Marietta, IEM (Information Engineering Methodology) was developed as part of a complete and integrated approach to the progressive development and subsequent maintenance of automated data sharing systems. This approach is centered around the organization`s objectives, inherent data relationships, and business practices. IEM provides the Information Systems community with a tool kit of disciplined techniques supported by automated tools. It includes seven stages: Information Strategy Planning; Business Area Analysis; Business System Design; Technical Design; Construction; Transition; Production. This document focuses on the Business Systems Architecture.
Energy Technology Data Exchange (ETDEWEB)
1977-08-01
The information evaluated the results of a 4-month feasibility study of an Integrated Community Energy System (ICES) at Clark University, Worchester, Mass. The study concluded that a demonstration ICES installation would save money and fuel; there are no university regulations restricting this installation; sites are available which would permit linking the ICES to the existing heat distribution system and the New England Electric System; and having this facility at the university would provide a full scale laboratory for persons experienced in monitoring and evaluating energy systems. Recommendations are made for funding and for equiment selection. (LCL)
Formulations and nebulizer performance.
O'Riordan, Thomas G
2002-11-01
To deliver a drug by nebulization, the drug must first be dispersed in a liquid (usually aqueous) medium. After application of a dispersing force (either a jet of gas or ultrasonic waves), the drug particles are contained within the aerosol droplets, which are then inhaled. Some drugs readily dissolve in water, whereas others need a cosolvent such as ethanol or propylene glycol. Some drugs are delivered as suspensions, and the efficiency of nebulizers can be different for solutions and suspensions. Solutions are delivered more efficiently with most devices. In general, conventional ultrasonic nebulizers should not be used to aerosolize suspensions, because of low efficiency. Newer strategies to improve the delivery of non-water-soluble drugs include the use of liposomes and the milling of the drug into very small "nanoparticles." In addition to the active therapeutic ingredient and solvents, drug formulations may include buffers (the solubility of some medications is influenced by pH), stabilizers, and, in the case of multi-dose preparations, antibacterial agents. Though formulations are designed to optimize drug solubility and stability, changes in formulation can also affect inhaled mass, particle size, and treatment time, though the differences between nebulizer brands probably have a greater impact than differences in formulation. Ultrasonic and jet nebulizers may damage protein and other complex agents through heat or shear stress. Additives to multi-dose formulations, especially antimicrobial and chelating agents, may cause adverse events, so there is a trend towards single-use, preservative-free vials.
High-Order Entropy Stable Formulations for Computational Fluid Dynamics
Carpenter, Mark H.; Fisher, Travis C.
2013-01-01
A systematic approach is presented for developing entropy stable (SS) formulations of any order for the Navier-Stokes equations. These SS formulations discretely conserve mass, momentum, energy and satisfy a mathematical entropy inequality. They are valid for smooth as well as discontinuous flows provided sufficient dissipation is added at shocks and discontinuities. Entropy stable formulations exist for all diagonal norm, summation-by-parts (SBP) operators, including all centered finite-difference operators, Legendre collocation finite-element operators, and certain finite-volume operators. Examples are presented using various entropy stable formulations that demonstrate the current state-of-the-art of these schemes.
Godino, Neus; del Campo, Francisco Javier; Muñoz, Francesc Xavier; Hansen, Mikkel Fougt; Kutter, Jörg P; Snakenborg, Detlef
2010-07-21
This work features the design, fabrication and characterisation of a miniaturised electroanalytical lab on a chip that allows the performance of a complete bioassay, from the capture of magnetic particles through their functionalisation and sample incubation to the detection of electroactive reaction products. The system is built using mainly polymeric materials such as PMMA and PDMS and fast prototyping techniques such as milling and moulding. The system also includes a set of microelectrodes, photo-lithographed on a silicon chip. The novelty lies in the design of the rotary microvalve, which contains a microreactor so that various reaction and incubation steps can be carried out in isolation from the detection event with zero dead volume. This avoids contamination and fouling of the electrodes by proteins or other organic matter, and extends the useful lifetime of the detector. The system operation is demonstrated by a model example, consisting in the functionalisation of streptavidin-coated magnetic particles with biotinylated beta-galactosidase over periods ranging from 5 to 15 min, at which point the particles saturate. Although the system is intended for the development of enzyme-based electrochemical bioassays, the concept of its rotary microreactor can be applied more broadly.
Energy Technology Data Exchange (ETDEWEB)
Gorham, E.D.; Breeding, R.J.; Brown, T.D.; Harper, F.T. [Sandia National Labs., Albuquerque, NM (United States); Helton, J.C. [Arizona State Univ., Tempe, AZ (United States); Murfin, W.B. [Technadyne Engineering Consultants, Inc., Albuquerque, NM (United States); Hora, S.C. [Hawaii Univ., Hilo, HI (United States)
1993-12-01
NUREG-1150 examines the risk to the public from five nuclear power plants. The NUREG-1150 plant studies are Level III probabilistic risk assessments (PRAs) and, as such, they consist of four analysis components: accident frequency analysis, accident progression analysis, source term analysis, and consequence analysis. This volume summarizes the methods utilized in performing the last three components and the assembly of these analyses into an overall risk assessment. The NUREG-1150 analysis approach is based on the following ideas: (1) general and relatively fast-running models for the individual analysis components, (2) well-defined interfaces between the individual analysis components, (3) use of Monte Carlo techniques together with an efficient sampling procedure to propagate uncertainties, (4) use of expert panels to develop distributions for important phenomenological issues, and (5) automation of the overall analysis. Many features of the new analysis procedures were adopted to facilitate a comprehensive treatment of uncertainty in the complete risk analysis. Uncertainties in the accident frequency, accident progression and source term analyses were included in the overall uncertainty assessment. The uncertainties in the consequence analysis were not included in this assessment. A large effort was devoted to the development of procedures for obtaining expert opinion and the execution of these procedures to quantify parameters and phenomena for which there is large uncertainty and divergent opinions in the reactor safety community.
Energy Technology Data Exchange (ETDEWEB)
Naqa, I El [Washington University, Saint Louis, MO (United States); Suneja, G [Brown Medical School, Providence, RI (United States); Lindsay, P E [Washington University, St. Louis, MO (United States); Hope, A J [Washington University, Saint Louis, MO (United States); Alaly, J R [Washington University, Saint Louis, MO (United States); Vicic, M [Washington University, Saint Louis, MO (United States); Bradley, J D [Washington University, Saint Louis, MO (United States); Apte, A [Washington University, Saint Louis, MO (United States); Deasy, J O [Washington University, Saint Louis, MO (United States)
2006-11-21
Radiotherapy treatment outcome models are a complicated function of treatment, clinical and biological factors. Our objective is to provide clinicians and scientists with an accurate, flexible and user-friendly software tool to explore radiotherapy outcomes data and build statistical tumour control or normal tissue complications models. The software tool, called the dose response explorer system (DREES), is based on Matlab, and uses a named-field structure array data type. DREES/Matlab in combination with another open-source tool (CERR) provides an environment for analysing treatment outcomes. DREES provides many radiotherapy outcome modelling features, including (1) fitting of analytical normal tissue complication probability (NTCP) and tumour control probability (TCP) models, (2) combined modelling of multiple dose-volume variables (e.g., mean dose, max dose, etc) and clinical factors (age, gender, stage, etc) using multi-term regression modelling, (3) manual or automated selection of logistic or actuarial model variables using bootstrap statistical resampling, (4) estimation of uncertainty in model parameters, (5) performance assessment of univariate and multivariate analyses using Spearman's rank correlation and chi-square statistics, boxplots, nomograms, Kaplan-Meier survival plots, and receiver operating characteristics curves, and (6) graphical capabilities to visualize NTCP or TCP prediction versus selected variable models using various plots. DREES provides clinical researchers with a tool customized for radiotherapy outcome modelling. DREES is freely distributed. We expect to continue developing DREES based on user feedback.
El Naqa, I.; Suneja, G.; Lindsay, P. E.; Hope, A. J.; Alaly, J. R.; Vicic, M.; Bradley, J. D.; Apte, A.; Deasy, J. O.
2006-11-01
Radiotherapy treatment outcome models are a complicated function of treatment, clinical and biological factors. Our objective is to provide clinicians and scientists with an accurate, flexible and user-friendly software tool to explore radiotherapy outcomes data and build statistical tumour control or normal tissue complications models. The software tool, called the dose response explorer system (DREES), is based on Matlab, and uses a named-field structure array data type. DREES/Matlab in combination with another open-source tool (CERR) provides an environment for analysing treatment outcomes. DREES provides many radiotherapy outcome modelling features, including (1) fitting of analytical normal tissue complication probability (NTCP) and tumour control probability (TCP) models, (2) combined modelling of multiple dose-volume variables (e.g., mean dose, max dose, etc) and clinical factors (age, gender, stage, etc) using multi-term regression modelling, (3) manual or automated selection of logistic or actuarial model variables using bootstrap statistical resampling, (4) estimation of uncertainty in model parameters, (5) performance assessment of univariate and multivariate analyses using Spearman's rank correlation and chi-square statistics, boxplots, nomograms, Kaplan-Meier survival plots, and receiver operating characteristics curves, and (6) graphical capabilities to visualize NTCP or TCP prediction versus selected variable models using various plots. DREES provides clinical researchers with a tool customized for radiotherapy outcome modelling. DREES is freely distributed. We expect to continue developing DREES based on user feedback.
Energy Technology Data Exchange (ETDEWEB)
Correa, D.G.; Ventura, N.; Tukamoto, G.; Gasparetto, E.L. [Federal University of Rio de Janeiro, Department of Radiology, Hospital Universitario Clementino Fraga Filho, Rio de Janeiro, RJ (Brazil); Clinica de Diagnostico por Imagem (CDPI), Rio de Janeiro (Brazil); Zimmermann, N. [Federal University of Rio de Janeiro, Department of Radiology, Hospital Universitario Clementino Fraga Filho, Rio de Janeiro, RJ (Brazil); Pontifical Catholic University of Rio Grande do Sul, Department of Psychology, Porto Alegre (Brazil); Doring, T.M. [Clinica de Diagnostico por Imagem (CDPI), Rio de Janeiro (Brazil); Leme, J.; Pereira, M. [Federal University of Rio de Janeiro, Department of Radiology, Hospital Universitario Clementino Fraga Filho, Rio de Janeiro, RJ (Brazil); Andrea, I. d'
2017-03-15
The objective of this study was to evaluate the cortical thickness and the volume of deep gray matter structures, measured from 3D T1-weighted gradient echo imaging, and white matter integrity, by diffusion tensor imaging (DTI) in patients with typical absence epilepsy (AE). Patients (n = 19) with typical childhood AE and juvenile AE, currently taking antiepileptic medication, were compared with control subjects (n = 19), matched for gender and age. 3D T1 magnetization-prepared rapid gradient echo-weighted imaging and DTI along 30 noncolinear directions were performed using a 1.5-T MR scanner. FreeSurfer was used to perform cortical volumetric reconstruction and segmentation of deep gray matter structures. For tract-based spatial statistics analysis of DTI, a white matter skeleton was created, along with a permutation-based inference with 5000 permutations. A threshold of p < 0.05 was used to identify abnormalities in fractional anisotropy (FA). The mean, radial, and axial diffusivities were also projected onto the mean FA skeleton. Patients with AE presented decreased FA and increased mean diffusivity and radial diffusivity values in the genu and the body of the corpus callosum and right anterior corona radiata, as well as decreased axial diffusivity in the left posterior thalamic radiation, inferior cerebellar peduncle, right cerebral peduncle, and right corticospinal tract. However, there were no significant differences in cortical thickness or deep gray matter structure volumes between patients with AE and controls. Abnormalities found in white matter integrity may help to better understand the pathophysiology of AE and optimize diagnosis and treatment strategies. (orig.)
Diehl, Martin; Groeber, Michael; Haase, Christian; Molodov, Dmitri A.; Roters, Franz; Raabe, Dierk
2017-03-01
Predicting, understanding, and controlling the mechanical behavior is the most important task when designing structural materials. Modern alloy systems—in which multiple deformation mechanisms, phases, and defects are introduced to overcome the inverse strength-ductility relationship—give raise to multiple possibilities for modifying the deformation behavior, rendering traditional, exclusively experimentally-based alloy development workflows inappropriate. For fast and efficient alloy design, it is therefore desirable to predict the mechanical performance of candidate alloys by simulation studies to replace time- and resource-consuming mechanical tests. Simulation tools suitable for this task need to correctly predict the mechanical behavior in dependence of alloy composition, microstructure, texture, phase fractions, and processing history. Here, an integrated computational materials engineering approach based on the open source software packages DREAM.3D and DAMASK (Düsseldorf Advanced Materials Simulation Kit) that enables such virtual material development is presented. More specific, our approach consists of the following three steps: (1) acquire statistical quantities that describe a microstructure, (2) build a representative volume element based on these quantities employing DREAM.3D, and (3) evaluate the representative volume using a predictive crystal plasticity material model provided by DAMASK. Exemplarily, these steps are here conducted for a high-manganese steel.
Diehl, Martin; Groeber, Michael; Haase, Christian; Molodov, Dmitri A.; Roters, Franz; Raabe, Dierk
2017-05-01
Predicting, understanding, and controlling the mechanical behavior is the most important task when designing structural materials. Modern alloy systems—in which multiple deformation mechanisms, phases, and defects are introduced to overcome the inverse strength-ductility relationship—give raise to multiple possibilities for modifying the deformation behavior, rendering traditional, exclusively experimentally-based alloy development workflows inappropriate. For fast and efficient alloy design, it is therefore desirable to predict the mechanical performance of candidate alloys by simulation studies to replace time- and resource-consuming mechanical tests. Simulation tools suitable for this task need to correctly predict the mechanical behavior in dependence of alloy composition, microstructure, texture, phase fractions, and processing history. Here, an integrated computational materials engineering approach based on the open source software packages DREAM.3D and DAMASK (Düsseldorf Advanced Materials Simulation Kit) that enables such virtual material development is presented. More specific, our approach consists of the following three steps: (1) acquire statistical quantities that describe a microstructure, (2) build a representative volume element based on these quantities employing DREAM.3D, and (3) evaluate the representative volume using a predictive crystal plasticity material model provided by DAMASK. Exemplarily, these steps are here conducted for a high-manganese steel.
Energy Technology Data Exchange (ETDEWEB)
Chin, E; Hoppe, R; Million, L; Loo, B; Koong, A; Xing, L; Hsu, A; Fahimian, B [Stanford University, Stanford, CA (United States); Otto, K [University of British Columbia, Vancouver, BC (Canada)
2015-06-15
Purpose: Integration of coordinated robotic table motion with inversely-planned arc delivery has the potential to resolve table-top delivery limitations of large-field treatments such as Total Body Irradiation (TBI), Total Lymphoid Irradiation (TLI), and Cranial-Spinal Irradiation (CSI). We formulate the foundation for Trajectory Modulated Arc Therapy (TMAT), and using Varian Developer Mode capabilities, experimentally investigate its practical implementation for such techniques. Methods: A MATLAB algorithm was developed for inverse planning optimization of the table motion, MLC positions, and gantry motion under extended-SSD geometry. To maximize the effective field size, delivery trajectories for TMAT TBI were formed with the table rotated at 270° IEC and dropped vertically to 152.5cm SSD. Preliminary testing of algorithm parameters was done through retrospective planning analysis. Robotic delivery was programmed using custom XML scripting on the TrueBeam Developer Mode platform. Final dose was calculated using the Eclipse AAA algorithm. Initial verification of delivery accuracy was measured using OSLDs on a solid water phantom of varying thickness. Results: A comparison of DVH curves demonstrated that dynamic couch motion irradiation was sufficiently approximated by static control points spaced in intervals of less than 2cm. Optimized MLC motion decreased the average lung dose to 68.5% of the prescription dose. The programmed irradiation integrating coordinated table motion was deliverable on a TrueBeam STx linac in 6.7 min. With the couch translating under an open 10cmx20cm field angled at 10°, OSLD measurements along the midline of a solid water phantom at depths of 3, 5, and 9cm were within 3% of the TPS AAA algorithm with an average deviation of 1.2%. Conclusion: A treatment planning and delivery system for Trajectory Modulated Arc Therapy of extended volumes has been established and experimentally demonstrated for TBI. Extension to other treatment
Affine group formulation of the Standard Model coupled to gravity
Energy Technology Data Exchange (ETDEWEB)
Chou, Ching-Yi, E-mail: l2897107@mail.ncku.edu.tw [Department of Physics, National Cheng Kung University, Taiwan (China); Ita, Eyo, E-mail: ita@usna.edu [Department of Physics, US Naval Academy, Annapolis, MD (United States); Soo, Chopin, E-mail: cpsoo@mail.ncku.edu.tw [Department of Physics, National Cheng Kung University, Taiwan (China)
2014-04-15
In this work we apply the affine group formalism for four dimensional gravity of Lorentzian signature, which is based on Klauder’s affine algebraic program, to the formulation of the Hamiltonian constraint of the interaction of matter and all forces, including gravity with non-vanishing cosmological constant Λ, as an affine Lie algebra. We use the hermitian action of fermions coupled to gravitation and Yang–Mills theory to find the density weight one fermionic super-Hamiltonian constraint. This term, combined with the Yang–Mills and Higgs energy densities, are composed with York’s integrated time functional. The result, when combined with the imaginary part of the Chern–Simons functional Q, forms the affine commutation relation with the volume element V(x). Affine algebraic quantization of gravitation and matter on equal footing implies a fundamental uncertainty relation which is predicated upon a non-vanishing cosmological constant. -- Highlights: •Wheeler–DeWitt equation (WDW) quantized as affine algebra, realizing Klauder’s program. •WDW formulated for interaction of matter and all forces, including gravity, as affine algebra. •WDW features Hermitian generators in spite of fermionic content: Standard Model addressed. •Constructed a family of physical states for the full, coupled theory via affine coherent states. •Fundamental uncertainty relation, predicated on non-vanishing cosmological constant.
Energy Technology Data Exchange (ETDEWEB)
Upadhyaya, Belle R. [Univ. of Tennessee, Knoxville, TN (United States); Hines, J. Wesley [Univ. of Tennessee, Knoxville, TN (United States); Lu, Baofu [Univ. of Tennessee, Knoxville, TN (United States)
2005-06-03
The overall purpose of this Nuclear Engineering Education Research (NEER) project was to integrate new, innovative, and existing technologies to develop a fault diagnostics and characterization system for nuclear plant steam generators (SG) and heat exchangers (HX). Issues related to system level degradation of SG and HX tubing, including tube fouling, performance under reduced heat transfer area, and the damage caused by stress corrosion cracking, are the important factors that influence overall plant operation, maintenance, and economic viability of nuclear power systems. The research at The University of Tennessee focused on the development of techniques for monitoring process and structural integrity of steam generators and heat exchangers. The objectives of the project were accomplished by the completion of the following tasks. All the objectives were accomplished during the project period. This report summarizes the research and development activities, results, and accomplishments during June 2001 September 2004. Development and testing of a high-fidelity nodal model of a U-tube steam generator (UTSG) to simulate the effects of fouling and to generate a database representing normal and degraded process conditions. Application of the group method of data handling (GMDH) method for process variable prediction. Development of a laboratory test module to simulate particulate fouling of HX tubes and its effect on overall thermal resistance. Application of the GMDH technique to predict HX fluid temperatures, and to compare with the calculated thermal resistance.Development of a hybrid modeling technique for process diagnosis and its evaluation using laboratory heat exchanger test data. Development and testing of a sensor suite using piezo-electric devices for monitoring structural integrity of both flat plates (beams) and tubing. Experiments were performed in air, and in water with and without bubbly flow. Development of advanced signal processing methods using
Energy Technology Data Exchange (ETDEWEB)
1978-11-01
The Master Plan describes a coordinated energy-conservation effort for the City, the effective application and ultimate success of which depend primarily on the active involvement of the City government and its functional departments. Following an introductory section, Section XXI, Community Energy Determinants, describes the natural and man-made environment, growth and energy profiles, and the institutional environment. Additional sections are entitled: Energy-Conservation Options (passive energy options and active energy-conservation options); Energy Integration; Community Energy Management; Energy-Conservation Implementation Plan; and an appendix containing an energy-related glossary, a directory to various sources of information on energy conservation, various technical documents, a copy of the National Energy Act, and a bibliography. (MCW)
DEFF Research Database (Denmark)
Olwig, Karen Fog
2011-01-01
After a long history dominated by out-migration, Denmark, Norway and Sweden have, in the past 50 years, become immigration societies. This article compares how these Scandinavian welfare societies have sought to incorporate immigrants and refugees into their national communities. It suggests that......, while the countries have adopted disparate policies and ideologies, differences in the actual treatment and attitudes towards immigrants and refugees in everyday life are less clear, due to parallel integration programmes based on strong similarities in the welfare systems and in cultural notions...... of equality in the three societies. Finally, it shows that family relations play a central role in immigrants’ and refugees’ establishment of a new life in the receiving societies, even though the welfare society takes on many of the social and economic functions of the family....
Lubrication in tablet formulations.
Wang, Jennifer; Wen, Hong; Desai, Divyakant
2010-05-01
Theoretical aspects and practical considerations of lubrication in tablet compression are reviewed in this paper. Properties of the materials that are often used as lubricants, such as magnesium stearate, in tablet dosage form are summarized. The manufacturing process factors that may affect tablet lubrication are discussed. As important as the lubricants in tablet formulations are, their presence can cause some changes to the tablet physical and chemical properties. Furthermore, a detailed review is provided on the methodologies used to characterize lubrication process during tablet compression with relevant process analytical technologies. Finally, the Quality-by-Design considerations for tablet formulation and process development in terms of lubrication are discussed.
Andrés, J.; Gracia, L.; Tornero, J.; García, J. A.; González, F.
2009-11-01
The implementation of a postprocessor for the NX™ platform (Siemens Corp.) is described in this paper. It is focused on a milling redundant robotic milling workcell consisting of one KUKA KR 15/2 manipulator (6 rotary joints, KRC2 controller) mounted on a linear axis and synchronized with a rotary table (i.e., two additional joints). For carrying out a milling task, a choice among a set of possible configurations is required, taking into account the ability to avoid singular configurations by using both additional joints. Usually, experience and knowledge of the workman allow an efficient control in these cases, but being it a tedious job. Similarly to this expert knowledge, a stand-alone fuzzy controller has been programmed with Matlab's Fuzzy Logic Toolbox (The MathWorks, Inc.). Two C++ programs complement the translation of the toolpath tracking (expressed in the Cartesian space) from the NX™-CAM module into KRL (KUKA Robot Language). In order to avoid singularities or joint limits, the location of the robot and the workpiece during the execution of the task is fit after an inverse kinematics position analysis and a fuzzy inference (i.e., fuzzy criterion in the Joint Space). Additionally, the applicability of robot arms for the manufacture of big volume prototypes with this technique is proven by means of one case studied. It consists of a big orographic model to simulate floodways, return flows and retention storage of a reservoir in the Mijares river (Puebla de Arenoso, Spain). This article deals with the problem for a constant tool orientation milling process and sets the technological basis for future research at five axis milling operations.
Towards the Amplituhedron Volume
Ferro, Livia; Orta, Andrea; Parisi, Matteo
2015-01-01
It has been recently conjectured that scattering amplitudes in planar N=4 super Yang-Mills are given by the volume of the (dual) amplituhedron. In this paper we show some interesting connections between the tree-level amplituhedron and a special class of differential equations. In particular we demonstrate how the amplituhedron volume for NMHV amplitudes is determined by these differential equations. The new formulation allows for a straightforward geometric description, without any reference to triangulations. Finally we discuss possible implications for volumes related to generic N^kMHV amplitudes.
Agnati, Luigi F; Guidolin, Diego; Marcoli, Manuela; Genedani, Susanna; Borroto-Escuela, Dasiel; Maura, Guido; Fuxe, Kjell
2014-01-01
Two far-reaching theoretical approaches, namely "Neuro-semeiotics" (NS) and "Free-energy Minimization" (FEM), have been recently proposed as frames within which to put forward heuristic hypotheses on integrative brain actions. In the present paper these two theoretical approaches are briefly discussed in the perspective of a recent model of brain architecture and information handling based on what we suggest calling Jacob's tinkering principle, whereby "to create is to recombine!". The NS and FEM theoretical approaches will be discussed from the perspective both of the Roamer-Type Volume Transmission (especially exosome-mediated) of intercellular communication and of the impact of receptor oligomers and Receptor-Receptor Interactions (RRIs) on signal recognition/decoding processes. In particular, the Bio-semeiotics concept of "adaptor" will be used to analyze RRIs as an important feature of NS. Furthermore, the concept of phenotypic plasticity of cells will be introduced in view of the demonstration of the possible transfer of receptors (i.e., adaptors) into a computational network via exosomes (see also Appendix). Thus, Jacob's tinkering principle will be proposed as a theoretical basis for some learning processes both at the network level (Turing-like type of machine) and at the molecular level as a consequence of both the plastic changes in the adaptors caused by the allosteric interactions in the receptor oligomers and the intercellular transfer of receptors. Finally, on the basis of NS and FEM theories, a unified perspective for integrative brain actions will be proposed.
Sayed, Sadeed Bin
2015-05-05
A time domain electric field volume integral equation (TD-EFVIE) solver is proposed for characterizing transient electromagnetic wave interactions on high-contrast dielectric scatterers. The TD-EFVIE is discretized using the Schaubert- Wilton-Glisson (SWG) and approximate prolate spherical wave (APSW) functions in space and time, respectively. The resulting system of equations can not be solved by a straightforward application of the marching on-in-time (MOT) scheme since the two-sided APSW interpolation functions require the knowledge of unknown “future” field samples during time marching. Causality of the MOT scheme is restored using an extrapolation technique that predicts the future samples from known “past” ones. Unlike the extrapolation techniques developed for MOT schemes that are used in solving time domain surface integral equations, this scheme trains the extrapolation coefficients using samples of exponentials with exponents on the complex frequency plane. This increases the stability of the MOT-TD-EFVIE solver significantly, since the temporal behavior of decaying and oscillating electromagnetic modes induced inside the scatterers is very accurately taken into account by this new extrapolation scheme. Numerical results demonstrate that the proposed MOT solver maintains its stability even when applied to analyzing wave interactions on high-contrast scatterers.
Energy Technology Data Exchange (ETDEWEB)
1994-02-01
The Salt Lake City Area Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Green, Gunnison, Rio Grande, and Colorado rivers and on Deer and Plateau creeks in the states of Wyoming, Utah, Colorado, Arizona, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams;) are influenced by Western power scheduling and transmission decisions. The EIS alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Westerns firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this environmental impact statement (EIS) include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources.
Energy Technology Data Exchange (ETDEWEB)
1994-02-01
The Salt Lake City Area Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Green, Gunnison, Rio Grande, and Colorado rivers and on Deer and Plateau creeks in the states of Wyoming, Utah, Colorado, Arizona, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams;) are influenced by Western power scheduling and transmission decisions. The EIS alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Westerns firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this environmental impact statement (EIS) include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources.
Energy Technology Data Exchange (ETDEWEB)
1994-02-01
The Salt Lake City Area Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Green, Gunnison, Rio Grande, and Colorado rivers and on Deer and Plateau creeks in the states of Wyoming, Utah, Colorado, Arizona, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams;) are influenced by Western power scheduling and transmission decisions. The EIS alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Westerns firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this environmental impact statement (EIS) include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources.
Design of formulated products: a systematic methodology
DEFF Research Database (Denmark)
Conte, Elisa; Gani, Rafiqul; Ng, K.M.
2011-01-01
-based computer-aided methodology for design and verification of a class of chemical-based products (liquid formulations) is presented. This methodology is part of an integrated three-stage approach for design/verification of liquid formulations where stage-1 generates a list of feasible product candidates and....../or verifies a specified set through a sequence of predefined activities (work-flow). Stage-2 and stage-3 (not presented here) deal with the planning and execution of experiments, for product validation. Four case studies have been developed to test the methodology. The computer-aided design (stage-1...
Smith, Paul L.; VonderHaar, Thomas H.
1996-01-01
The principal goal of this project is to establish relationships that would allow application of area-time integral (ATI) calculations based upon satellite data to estimate rainfall volumes. The research is being carried out as a collaborative effort between the two participating organizations, with the satellite data analysis to determine values for the ATIs being done primarily by the STC-METSAT scientists and the associated radar data analysis to determine the 'ground-truth' rainfall estimates being done primarily at the South Dakota School of Mines and Technology (SDSM&T). Synthesis of the two separate kinds of data and investigation of the resulting rainfall-versus-ATI relationships is then carried out jointly. The research has been pursued using two different approaches, which for convenience can be designated as the 'fixed-threshold approach' and the 'adaptive-threshold approach'. In the former, an attempt is made to determine a single temperature threshold in the satellite infrared data that would yield ATI values for identifiable cloud clusters which are closely related to the corresponding rainfall amounts as determined by radar. Work on the second, or 'adaptive-threshold', approach for determining the satellite ATI values has explored two avenues: (1) attempt involved choosing IR thresholds to match the satellite ATI values with ones separately calculated from the radar data on a case basis; and (2) an attempt involved a striaghtforward screening analysis to determine the (fixed) offset that would lead to the strongest correlation and lowest standard error of estimate in the relationship between the satellite ATI values and the corresponding rainfall volumes.
Liposomal paclitaxel formulations.
Koudelka, Stěpán; Turánek, Jaroslav
2012-11-10
Over the past three decades, taxanes represent one of the most important new classes of drugs approved in oncology. Paclitaxel (PTX), the prototype of this class, is an anti-cancer drug approved for the treatment of breast and ovarian cancer. However, notwithstanding a suitable premedication, present-day chemotherapy employing a commercial preparation of PTX (Taxol®) is associated with serious side effects and hypersensitivity reactions. Liposomes represent advanced and versatile delivery systems for drugs. Generally, both in vivo mice tumor models and human clinical trials demonstrated that liposomal PTX formulations significantly increase a maximum tolerated dose (MTD) of PTX which outperform that for Taxol®. Liposomal PTX formulations are in various stages of clinical trials. LEP-ETU (NeoPharm) and EndoTAG®-1 (Medigene) have reached the phase II of the clinical trials; Lipusu® (Luye Pharma Group) has already been commercialized. Present achievements in the preparation of various liposomal formulations of PTX, the development of targeted liposomal PTX systems and the progress in clinical testing of liposomal PTX are discussed in this review summarizing about 30 years of liposomal PTX development.
RAACFDb: Rheumatoid arthritis ayurvedic classical formulations database.
Mohamed Thoufic Ali, A M; Agrawal, Aakash; Sajitha Lulu, S; Mohana Priya, A; Vino, S
2017-02-02
In the past years, the treatment of rheumatoid arthritis (RA) has undergone remarkable changes in all therapeutic modes. The present newfangled care in clinical research is to determine and to pick a new track for better treatment options for RA. Recent ethnopharmacological investigations revealed that traditional herbal remedies are the most preferred modality of complementary and alternative medicine (CAM). However, several ayurvedic modes of treatments and formulations for RA are not much studied and documented from Indian traditional system of medicine. Therefore, this directed us to develop an integrated database, RAACFDb (acronym: Rheumatoid Arthritis Ayurvedic Classical Formulations Database) by consolidating data from the repository of Vedic Samhita - The Ayurveda to retrieve the available formulations information easily. Literature data was gathered using several search engines and from ayurvedic practitioners for loading information in the database. In order to represent the collected information about classical ayurvedic formulations, an integrated database is constructed and implemented on a MySQL and PHP back-end. The database is supported by describing all the ayurvedic classical formulations for the treatment rheumatoid arthritis. It includes composition, usage, plant parts used, active ingredients present in the composition and their structures. The prime objective is to locate ayurvedic formulations proven to be quite successful and highly effective among the patients with reduced side effects. The database (freely available at www.beta.vit.ac.in/raacfdb/index.html) hopefully enables easy access for clinical researchers and students to discover novel leads with reduced side effects. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
Zhang, Hao; Li, Lihong; Zhu, Hongbin; Han, Hao; Song, Bowen; Liang, Zhengrong
2014-01-01
Orally administered tagging agents are usually used in CT colonography (CTC) to differentiate residual bowel content from native colonic structures. However, the high-density contrast agents tend to introduce pseudo-enhancement (PE) effect on neighboring soft tissues and elevate their observed CT attenuation value toward that of the tagged materials (TMs), which may result in an excessive electronic colon cleansing (ECC) since the pseudo-enhanced soft tissues are incorrectly identified as TMs. To address this issue, we integrated a 3D scale-based PE correction into our previous ECC pipeline based on the maximum a posteriori expectation-maximization partial volume (PV) segmentation. The newly proposed ECC scheme takes into account both the PE and PV effects that commonly appear in CTC images. We evaluated the new scheme on 40 patient CTC scans, both qualitatively through display of segmentation results, and quantitatively through radiologists' blind scoring (human observer) and computer-aided detection (CAD) of colon polyps (computer observer). Performance of the presented algorithm has shown consistent improvements over our previous ECC pipeline, especially for the detection of small polyps submerged in the contrast agents. The CAD results of polyp detection showed that 4 more submerged polyps were detected for our new ECC scheme over the previous one.
Boselli, A; Cortese, L; Gavazzi, G; Buat, V
2012-01-01
We present long-slit integrated spectroscopy of 238 late-type galaxies belonging to the Herschel Reference Survey, a volume limited sample representative of the nearby universe. This sample has a unique legacy value since ideally defined for any statistical study of the multifrequency properties of galaxies spanning a large range in morphological type and luminosity. The spectroscopic observations cover the spectral range 3600-6900 A at a resolution R ~ 1000 and are thus suitable for separating the underlying absorption from the emission of the Hbeta line as well as the two [NII] lines from the Halpha emission. We measure the fluxes and the equivalent widths of the strongest emission lines ([OII], Hbeta, [OIII], [NII], Halpha, and [SII]). The data are used to study the distribution of the equivalent width of all the emission lines, of the Balmer decrement C(Hbeta) and of the observed underlying Balmer absorption under Hbeta in this sample. Combining these new spectroscopic data with those available at other f...
Energy Technology Data Exchange (ETDEWEB)
1994-09-01
This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole.
Formulations of entomopathogens as bioinsecticides
Developing a proper formulation is a necessary component for commercialization of entomopathogenic microbes as biological insecticides. The objective of this chapter is to present broad-ranging information about formulations to foster research toward developing commercial microbial-based insecticide...
Systematic Equation Formulation
DEFF Research Database (Denmark)
Lindberg, Erik
2007-01-01
A tutorial giving a very simple introduction to the set-up of the equations used as a model for an electrical/electronic circuit. The aim is to find a method which is as simple and general as possible with respect to implementation in a computer program. The “Modified Nodal Approach”, MNA, and th......, and the “Controlled Source Approach”, CSA, for systematic equation formulation are investigated. It is suggested that the kernel of the P Spice program based on MNA is reprogrammed....
Domain-Independent Heuristics for Goal Formulation
2013-05-01
on the projected consequences of achieving them. We then describe their integration in M- ARTUE , an agent that balances the satisfaction of internal...for goal formulation. For example, ARTUE (Molineaux et al. 2010a) uses manually-engineered trigger rules that add goals suggested by a rule when...its trigger conditions are met. This reactive mechanism allows the designer to instruct and control ARTUE , but prevents it from leveraging its own
Gover, A Rod
2016-01-01
For any conformally compact manifold with hypersurface boundary we define a canonical renormalized volume functional and compute an explicit, holographic formula for the corresponding anomaly. For the special case of asymptotically Einstein manifolds, our method recovers the known results. The anomaly does not depend on any particular choice of regulator, but the coefficients of divergences do. We give explicit formulae for these divergences valid for any choice of regulating hypersurface; these should be relevant to recent studies of quantum corrections to entanglement entropies. The anomaly is expressed as a conformally invariant integral of a local Q-curvature that generalizes the Branson Q-curvature by including data of the embedding. In each dimension this canonically defines a higher dimensional generalization of the Willmore energy/rigid string action. We show that the variation of these energy functionals is exactly the obstruction to solving a singular Yamabe type problem with boundary data along the...
Bagci, Hakan
2014-01-06
Time domain integral equation (TDIE) solvers represent an attractive alternative to finite difference (FDTD) and finite element (FEM) schemes for analyzing transient electromagnetic interactions on composite scatterers. Current induced on a scatterer, in response to a transient incident field, generates a scattered field. First, the scattered field is expressed as a spatio-temporal convolution of the current and the Green function of the background medium. Then, a TDIE is obtained by enforcing boundary conditions and/or fundamental field relations. TDIEs are often solved for the unknown current using marching on-in-time (MOT) schemes. MOT-TDIE solvers expand the current using local spatio-temporal basis functions. Inserting this expansion into the TDIE and testing the resulting equation in space and time yields a lower triangular system of equations (termed MOT system), which can be solved by marching in time for the coefficients of the current expansion. Stability of the MOT scheme often depends on how accurately the spatio-temporal convolution of the current and the Green function is discretized. In this work, band-limited prolate-based interpolation functions are used as temporal bases in expanding the current and discretizing the spatio-temporal convolution. Unfortunately, these functions are two sided, i.e., they require ”future” current samples for interpolation, resulting in a non-causal MOT system. To alleviate the effect of non-causality and restore the ability to march in time, an extrapolation scheme can be used to estimate the future values of the currents from their past values. Here, an accurate, stable and band-limited extrapolation scheme is developed for this purpose. This extrapolation scheme uses complex exponents, rather than commonly used harmonics, so that propagating and decaying mode fields inside the dielectric scatterers are accurately modeled. The resulting MOT scheme is applied to solving the time domain volume integral equation (VIE
DEFF Research Database (Denmark)
Plummer, Ruth; Swaisland, Helen; Leunen, Karin
2015-01-01
BACKGROUND: The oral PARP inhibitor olaparib has shown efficacy in patients with BRCA-mutated cancer. This Phase I, open-label, three-part study (Parts A-C) in patients with advanced solid tumours evaluated the effect of food on the pharmacokinetics (PK) of olaparib when administered in tablet...... formulation. METHODS: PK data were obtained in Part A using a two-treatment period crossover design; single-dose olaparib 300 mg (two 150 mg tablets) was administered in two prandial states: fasted and fed. In Part B, patients received olaparib tablets (300 mg bid) for 5 days under fasting conditions; in Part...... exposure to olaparib 300 mg tablets, although in the absence of an effect on the extent of olaparib absorption....
Nonlinear dynamical systems of mathematical physics spectral and symplectic integrability analysis
Blackmore, Denis; Samoylenko, Valeriy Hr
2011-01-01
This distinctive volume presents a clear, rigorous grounding in modern nonlinear integrable dynamics theory and applications in mathematical physics, and an introduction to timely leading-edge developments in the field - including some innovations by the authors themselves - that have not appeared in any other book. The exposition begins with an introduction to modern integrable dynamical systems theory, treating such topics as Liouville-Arnold and Mischenko-Fomenko integrability. This sets the stage for such topics as new formulations of the gradient-holonomic algorithm for Lax integrability,
Ergül, Özgür
2014-04-01
Graphics processing units (GPUs) are gradually becoming mainstream in high-performance computing, as their capabilities for enhancing performance of a large spectrum of scientific applications to many fold when compared to multi-core CPUs have been clearly identified and proven. In this paper, implementation and performance-tuning details for porting an explicit marching-on-in-time (MOT)-based time-domain volume-integral-equation (TDVIE) solver onto GPUs are described in detail. To this end, a high-level approach, utilizing the OpenACC directive-based parallel programming model, is used to minimize two often-faced challenges in GPU programming: developer productivity and code portability. The MOT-TDVIE solver code, originally developed for CPUs, is annotated with compiler directives to port it to GPUs in a fashion similar to how OpenMP targets multi-core CPUs. In contrast to CUDA and OpenCL, where significant modifications to CPU-based codes are required, this high-level approach therefore requires minimal changes to the codes. In this work, we make use of two available OpenACC compilers, CAPS and PGI. Our experience reveals that different annotations of the code are required for each of the compilers, due to different interpretations of the fairly new standard by the compiler developers. Both versions of the OpenACC accelerated code achieved significant performance improvements, with up to 30× speedup against the sequential CPU code using recent hardware technology. Moreover, we demonstrated that the GPU-accelerated fully explicit MOT-TDVIE solver leveraged energy-consumption gains of the order of 3× against its CPU counterpart. © 2014 IEEE.
Fabris, Clara; Ouédraogo, Robert Kossivi; Coppellotti, Olimpia; Dabiré, Roch K; Diabaté, Abdoulaye; Di Martino, Piera; Guidolin, Laura; Jori, Giulio; Lucantoni, Leonardo; Lupidi, Giulio; Martena, Valentina; Sawadogo, Simon P; Soncin, Marina; Habluetzel, Annette
2012-09-01
Biolarvicides, such as microbial formulations based on Bacillus thuringiensis and B. sphaericus, have been found to be highly effective against mosquito larvae and are currently employed as eco-friendly alternatives to synthetic chemical insecticides for vector control. Recently, a porphyrin of natural origin has been suggested as a sunlight-activatable larvicide against the dengue vector Aedes aegypti. In order to validate the approach for the control of the malaria vector, we tested the photo-larvicidal activity of a novel porphyrin, namely meso-tri(N-methyl-pyridyl), mono(N-dodecyl-pyridyl)porphine, C12, associated with two specifically selected carriers, against Anopheles gambiae s.s. and An. arabiensis larvae, both laboratory reared and collected from malaria endemic sites in Burkina Faso. Both C12-porphyrin formulates, when administered to larvae at a 50μM porphyrin dose, were accumulated in the alimentary canal. Subsequent exposure of the porphyrin-loaded larvae to sunlight for short times (0.5-3h) led to a complete mortality. The high efficacy exhibited by a "foodstuff" porphyrin formulate also in the presence of typical larval food particles opens promising perspectives for the development of an effective photocidal larvicide.
Formulation of Complex Action Theory
Nagao, Keiichi
2011-01-01
We formulate the complex action theory from a fundamental level so that we can deal with a complex coordinate $q$ and a complex momentum $p$. We extend $| q >$ and $| p>$ to complex $q$ and $p$ by utilizing coherent states of harmonic oscillators. Introducing a philosophy to keep the analyticity in parameter variables of Feynman path integral, we define a modified set of complex conjugate, real and imaginary parts, hermitian conjugates and bras. They enable us to have both orthogonality and completeness relations for $|q >$ and $|p >$ with complex $q$ and $p$. We also pose a theorem on the relation between functions and operators to make it clear to some extent. Furthermore, extending our previous work \\cite{Nagao:2010xu} to the complex coordinate case, we study a system defined by a diagonalizable non-hermitian bounded Hamiltonian, and show that a hermitian Hamiltonian is effectively obtained after a long time development by introducing a proper inner product. If the hermitian Hamiltonian is given in a local...
Plutonium Immobilization Project Baseline Formulation
Energy Technology Data Exchange (ETDEWEB)
Ebbinghaus, B.
1999-02-01
A key milestone for the Immobilization Project (AOP Milestone 3.2a) in Fiscal Year 1998 (FY98) is the definition of the baseline composition or formulation for the plutonium ceramic form. The baseline formulation for the plutonium ceramic product must be finalized before the repository- and plant-related process specifications can be determined. The baseline formulation that is currently specified is given in Table 1.1. In addition to the baseline formulation specification, this report provides specifications for two alternative formulations, related compositional specifications (e.g., precursor compositions and mixing recipes), and other preliminary form and process specifications that are linked to the baseline formulation. The preliminary specifications, when finalized, are not expected to vary tremendously from the preliminary values given.
Discontinuous Galerkin flood model formulation: Luxury or necessity?
Kesserwani, Georges; Wang, Yueling
2014-08-01
The finite volume Godunov-type flood model formulation is the most comprehensive amongst those currently employed for flood risk modeling. The local Discontinuous Galerkin method constitutes a more complex, rigorous, and extended local Godunov-type formulation. However, the practical merit associated with such an increase in the level of complexity of the formulation is yet to be decided. This work makes the case for a second-order Runge-Kutta Discontinuous Galerkin (RKDG2) formulation and contrasts it with the equivalently accurate finite volume (MUSCL) formulation, both of which solve the Shallow Water Equations (SWE) in two space dimensions. The numerical complexity of both formulations are presented and their capabilities are explored for wide-ranging diagnostic and real-scale tests, incorporating all challenging features relevant to flood inundation modeling. Our findings reveal that the extra complexity associated with the RKDG2 model pays off by providing higher-quality solution behavior on very coarse meshes and improved velocity predictions. The practical implication of this is that improved accuracy for flood modeling simulations will result when terrain data are limited or of a low resolution.
Baseline LAW Glass Formulation Testing
Energy Technology Data Exchange (ETDEWEB)
Kruger, Albert A. [USDOE Office of River Protection, Richland, WA (United States); Mooers, Cavin [The Catholic University of America, Washington, DC (United States). Vitreous State Lab.; Bazemore, Gina [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Pegg, Ian L. [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Hight, Kenneth [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Lai, Shan Tao [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Buechele, Andrew [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Rielley, Elizabeth [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Gan, Hao [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Muller, Isabelle S. [The Catholic University of America, Washington, DC (United States). Vitreous State Lab; Cecil, Richard [The Catholic University of America, Washington, DC (United States). Vitreous State Lab
2013-06-13
The major objective of the baseline glass formulation work was to develop and select glass formulations that are compliant with contractual and processing requirements for each of the LAW waste streams. Other objectives of the work included preparation and characterization of glasses with respect to the properties of interest, optimization of sulfate loading in the glasses, evaluation of ability to achieve waste loading limits, testing to demonstrate compatibility of glass melts with melter materials of construction, development of glass formulations to support ILAW qualification activities, and identification of glass formulation issues with respect to contract specifications and processing requirements.
Energy Technology Data Exchange (ETDEWEB)
Kamphuis, E. [ETC Nederland, Leusden (Netherlands); Permana, I. [Technical Education Development Centre TEDC, Bandung (Indonesia)
2011-11-15
The overall objective of the CASINDO programme is to establish a self-sustaining and self-developing structure at both the national and regional level to build and strengthen human capacity to enable the provinces of North Sumatra, Yogyakarta, Central Java, West Nusa Tenggara and Papua to formulate sound policies for renewable energy and energy efficiency and to develop and implement sustainable energy projects. This report focuses on the achievements for settling a national curriculum for Renewable Energy Technologies (RET) within the framework of national programme SPECTRUM, which includes all curricula of the medium technical schools in Indonesia.
Astuti, Valerio; Rovelli, Carlo
2016-01-01
Building on a technical result by Brunnemann and Rideout on the spectrum of the Volume operator in Loop Quantum Gravity, we show that the dimension of the space of the quadrivalent states --with finite-volume individual nodes-- describing a region with total volume smaller than $V$, has \\emph{finite} dimension, bounded by $V \\log V$. This allows us to introduce the notion of "volume entropy": the von Neumann entropy associated to the measurement of volume.
The dual formulation of cosmic strings and vortices
Lee, Ki-Myeong
1993-01-01
We study four dimensional systems of global, axionic and local strings. By using the path integral formalism, we derive the dual formulation of these systems, where Goldstone bosons, axions and missive vector bosons are described by antisymmetric tensor fields, and strings appear as a source for these tensor fields. We show also how magnetic monopoles attached to local strings are described in the dual formulation. We conclude with some remarks.
Mackenzie, S G; Leinonen, I; Ferguson, N; Kyriazakis, I
2016-05-28
The objective of this study was to develop a novel methodology that enables pig diets to be formulated explicitly for environmental impact objectives using a Life Cycle Assessment (LCA) approach. To achieve this, the following methodological issues had to be addressed: (1) account for environmental impacts caused by both ingredient choice and nutrient excretion, (2) formulate diets for multiple environmental impact objectives and (3) allow flexibility to identify the optimal nutritional composition for each environmental impact objective. An LCA model based on Canadian pig farms was integrated into a diet formulation tool to compare the use of different ingredients in Eastern and Western Canada. By allowing the feed energy content to vary, it was possible to identify the optimum energy density for different environmental impact objectives, while accounting for the expected effect of energy density on feed intake. A least-cost diet was compared with diets formulated to minimise the following objectives: non-renewable resource use, acidification potential, eutrophication potential, global warming potential and a combined environmental impact score (using these four categories). The resulting environmental impacts were compared using parallel Monte Carlo simulations to account for shared uncertainty. When optimising diets to minimise a single environmental impact category, reductions in the said category were observed in all cases. However, this was at the expense of increasing the impact in other categories and higher dietary costs. The methodology can identify nutritional strategies to minimise environmental impacts, such as increasing the nutritional density of the diets, compared with the least-cost formulation.
Significance of Strain in Formulation in Theory of Solid Mechanics
Patnaik, Surya N.; Coroneos, Rula M.; Hopkins, Dale A.
2003-01-01
The basic theory of solid mechanics was deemed complete circa 1860 when St. Venant provided the strain formulation or the field compatibility condition. The strain formulation was incomplete. The missing portion has been formulated and identified as the boundary compatibility condition (BCC). The BCC, derived through a variational formulation, has been verified through integral theorem and solution of problems. The BCC, unlike the field counterpart, do not trivialize when expressed in displacements. Navier s method and the stiffness formulation have to account for the extra conditions especially at the inter-element boundaries in a finite element model. Completion of the strain formulation has led to the revival of the direct force calculation methods: the Integrated Force Method (IFM) and its dual (IFMD) for finite element analysis, and the completed Beltrami-Michell formulation (CBMF) in elasticity. The benefits from the new methods in elasticity, in finite element analysis, and in design optimization are discussed. Existing solutions and computer codes may have to be adjusted for the compliance of the new conditions. Complacency because the discipline is over a century old and computer codes have been developed for half a century can lead to stagnation of the discipline.
Zhang, Yongsheng; Wei, Heng; Zheng, Kangning
2017-01-01
Considering that metro network expansion brings us with more alternative routes, it is attractive to integrate the impacts of routes set and the interdependency among alternative routes on route choice probability into route choice modeling. Therefore, the formulation, estimation and application of a constrained multinomial probit (CMNP) route choice model in the metro network are carried out in this paper. The utility function is formulated as three components: the compensatory component is a function of influencing factors; the non-compensatory component measures the impacts of routes set on utility; following a multivariate normal distribution, the covariance of error component is structured into three parts, representing the correlation among routes, the transfer variance of route, and the unobserved variance respectively. Considering multidimensional integrals of the multivariate normal probability density function, the CMNP model is rewritten as Hierarchical Bayes formula and M-H sampling algorithm based Monte Carlo Markov Chain approach is constructed to estimate all parameters. Based on Guangzhou Metro data, reliable estimation results are gained. Furthermore, the proposed CMNP model also shows a good forecasting performance for the route choice probabilities calculation and a good application performance for transfer flow volume prediction. PMID:28591188
Operator Formulation of Classical Mechanics.
Cohn, Jack
1980-01-01
Discusses the construction of an operator formulation of classical mechanics which is directly concerned with wave packets in configuration space and is more similar to that of convential quantum theory than other extant operator formulations of classical mechanics. (Author/HM)
Formulation of supergravity without superspace
Ferrara, S
1979-01-01
Supergravity, the particle theory which unifies under a unique gauge principle the quantum-mechanical concept of spin and space-time geometry, is formulated in terms of quantities defined over Minkowski space-time. 'l'he relation between this formulation and the fonnulation which uses superspace, the space-time supplemented by spinning degrees of freedom, is also briefly discussed.
Diagonal multi-soliton matrix elements in finite volume
Pálmai, T
2012-01-01
We consider diagonal matrix elements of local operators between multi-soliton states in finite volume in the sine-Gordon model, and formulate a conjecture regarding their finite size dependence which is valid up to corrections exponential in the volume. This conjecture extends the results of Pozsgay and Tak\\'acs which were only valid for diagonal scattering. In order to test the conjecture we implement a numerical renormalization group improved truncated conformal space approach. The numerical comparisons confirm the conjecture, which is expected to be valid for general integrable field theories. The conjectured formula can be used to evaluate finite temperature one-point and two-point functions using recently developed methods.
Metric-Independent Volume-Forms in Gravity and Cosmology
Guendelman, Eduardo; Pacheva, Svetlana
2015-01-01
Employing alternative spacetime volume-forms (generally-covariant integration measure densities) independent of the pertinent Riemannian spacetime metric have profound impact in general relativity. Although formally appearing as "pure-gauge" dynamical degrees of freedom they trigger a number of remarkable physically important phenomena such as: (i) new mechanism of dynamical generation of cosmological constant; (ii) new type of "quintessential inflation" scenario in cosmology; (iii) non-singular initial "emergent universe" phase of cosmological evolution preceding the inflationary phase; (iv) new mechanism of dynamical spontaneous breakdown of supersymmetry in supergravity; (v) gravitational electrovacuum "bags". We study in some detail the properties, together with their canonical Hamiltonian formulation, of a class of generalized gravity-matter models built with two independent non-Riemannian volume-forms and discuss their implications in cosmology.
Optimization of formulation variables of benzocaine liposomes using experimental design.
Mura, Paola; Capasso, Gaetano; Maestrelli, Francesca; Furlanetto, Sandra
2008-01-01
This study aimed to optimize, by means of an experimental design multivariate strategy, a liposomal formulation for topical delivery of the local anaesthetic agent benzocaine. The formulation variables for the vesicle lipid phase uses potassium glycyrrhizinate (KG) as an alternative to cholesterol and the addition of a cationic (stearylamine) or anionic (dicethylphosphate) surfactant (qualitative factors); the percents of ethanol and the total volume of the hydration phase (quantitative factors) were the variables for the hydrophilic phase. The combined influence of these factors on the considered responses (encapsulation efficiency (EE%) and percent drug permeated at 180 min (P%)) was evaluated by means of a D-optimal design strategy. Graphic analysis of the effects indicated that maximization of the selected responses requested opposite levels of the considered factors: For example, KG and stearylamine were better for increasing EE%, and cholesterol and dicethylphosphate for increasing P%. In the second step, the Doehlert design, applied for the response-surface study of the quantitative factors, pointed out a negative interaction between percent ethanol and volume of the hydration phase and allowed prediction of the best formulation for maximizing drug permeation rate. Experimental P% data of the optimized formulation were inside the confidence interval (P < 0.05) calculated around the predicted value of the response. This proved the suitability of the proposed approach for optimizing the composition of liposomal formulations and predicting the effects of formulation variables on the considered experimental response. Moreover, the optimized formulation enabled a significant improvement (P < 0.05) of the drug anaesthetic effect with respect to the starting reference liposomal formulation, thus demonstrating its actually better therapeutic effectiveness.
Stochastic 2D Incompressible Navier-Stokes Solver Using the Vorticity-Stream Function Formulation
Directory of Open Access Journals (Sweden)
Mohamed A. El-Beltagy
2013-01-01
Full Text Available A two-dimensional stochastic solver for the incompressible Navier-Stokes equations is developed. The vorticity-stream function formulation is considered. The polynomial chaos expansion was integrated with an unstructured node-centered finite-volume solver. A second-order upwind scheme is used in the convection term for numerical stability and higher-order discretization. The resulting sparse linear system is solved efficiently by a direct parallel solver. The mean and variance simulations of the cavity flow are done for random variation of the viscosity and the lid velocity. The solver was tested and compared with the Monte-Carlo simulations and with previous research works. The developed solver is proved to be efficient in simulating the stochastic two-dimensional incompressible flows.
Numerical Simulation of Anisotropic Tissue Growth Using a Total Lagrangian Formulation
Directory of Open Access Journals (Sweden)
Grand Roman Joldes
2015-01-01
Full Text Available This paper describes a new method for simulating tissue growth which can handle anisotropic changes in volume. The method takes advantage of the total Lagrangian formulation which allows the computation of nodal forces for each element in a finite element mesh based on a theoretical stress-free configuration, obtained by considering the unconstrained anisotropic growth of the considered element. The method allows the modelling of shrinking (atrophy, swelling, or tissue growth and the computation of the resulting mechanical stresses in the surrounding tissue. The steady-state solution is obtained using an explicit integration method and dynamic relaxation. The proposed method allows the coupling of continuum mechanical simulations with underlying growth mechanisms, offering a tool for the multiscale study of tissue growth.
Novel Formulations for Antimicrobial Peptides
Directory of Open Access Journals (Sweden)
Ana Maria Carmona-Ribeiro
2014-10-01
Full Text Available Peptides in general hold much promise as a major ingredient in novel supramolecular assemblies. They may become essential in vaccine design, antimicrobial chemotherapy, cancer immunotherapy, food preservation, organs transplants, design of novel materials for dentistry, formulations against diabetes and other important strategical applications. This review discusses how novel formulations may improve the therapeutic index of antimicrobial peptides by protecting their activity and improving their bioavailability. The diversity of novel formulations using lipids, liposomes, nanoparticles, polymers, micelles, etc., within the limits of nanotechnology may also provide novel applications going beyond antimicrobial chemotherapy.
Su, T. Y.; Appleby, R. A.; Chen, H. C.
1991-01-01
The BCON is a menu-driven graphics interface program whose input consists of strings or arrays of points generated from a computer aided design (CAD) tool or any other surface geometry source. The user needs to design the block topology and prepare the surface geometry definition and surface grids separately. The BCON generates input files that contain the block definitions and the block relationships required for generating a multiblock volume grid with the EAGLE grid generation package. The BCON also generates the block boundary conditions file which is used along with the block relationship file as input for the general multiblock Euler (GMBE) code (GMBE, volumes 1 and 3).
Formulation of Complex Action Theory
Nagao, Keiichi; Nielsen, Holger Bech
2011-01-01
We formulate a complex action theory which includes operators of coordinate and momentum $\\hat{q}$ and $\\hat{p}$ being replaced with non-hermitian operators $\\hat{q}_{new}$ and $\\hat{p}_{new}$, and their eigenstates ${}_m
Quasienergy formulation of damped response theory.
Kristensen, Kasper; Kauczor, Joanna; Kjaergaard, Thomas; Jørgensen, Poul
2009-07-28
We present a quasienergy-based formulation of damped response theory where a common effective lifetime parameter has been introduced for all excited states in terms of complex excitation energies. The introduction of finite excited state lifetimes leads to a set of (complex) damped response equations, which have the same form to all orders in the perturbation. An algorithm is presented for solving the damped response equations in Hartree-Fock theory and Kohn-Sham density functional theory. The use of the quasienergy formulation allows us to obtain directly the computationally simplest expressions for damped response functions by applying a set of response parameter elimination rules, which minimize the total number of damped response equations to be solved. In standard response theory broadened absorption spectra are obtained by ad hoc superimposing lineshape functions onto the absorption stick spectra, whereas an empirical lineshape function common to all excitations is an integrated part of damped response theory. By superimposing the lineshape functions inherent in damped response theory onto the stick spectra of standard response theory, we show that the absorption spectra obtained in standard and damped response theory calculations are identical. We demonstrate that damped response theory may be applied to obtain absorption spectra in all frequency ranges, also those that are not readily addressed using standard response theory. This makes damped response theory an effective tool, e.g., for determining absorption spectra for large molecules, where the density of the excited states may be very high, and where standard response theory therefore is not applicable in practice. A thorough comparison is given between our formulation of damped response theory and the formulation by Norman et al. [J. Chem. Phys. 123, 194103 (2005)].
Biochemical kinetics in changing volumes.
Pawłowski, Piotr H; Zielenkiewicz, Piotr
2004-01-01
The need of taking into account the change of compartment volume when developing chemical kinetics analysis inside the living cell is discussed. Literature models of a single enzymatic Michaelis-Menten process, glycolytic oscillations, and mitotic cyclin oscillations were tested with appropriate theoretical extension in the direction of volume modification allowance. Linear and exponential type of volume increase regimes were compared. Due to the above, in a growing cell damping of the amplitude, phase shift, and time pattern deformation of the metabolic rhythms considered were detected, depending on the volume change character. The performed computer simulations allow us to conclude that evolution of the cell volume can be an essential factor of the chemical kinetics in a growing cell. The phenomenon of additional metabolite oscillations caused by the periodic cell growth and division was theoretically predicted and mathematically described. Also, the hypothesis of the periodized state in the growing cell as the generalization of the steady-state was formulated.
Formulation optimization of arecoline patches.
Wu, Pao-Chu; Tsai, Pi-Ju; Lin, Shin-Chen; Huang, Yaw-Bin
2014-01-01
The response surface methodology (RSM) including polynomial equations has been used to design an optimal patch formulation with appropriate adhesion and flux. The patch formulations were composed of different polymers, including Eudragit RS 100 (ERS), Eudragit RL 100 (ERL) and polyvinylpyrrolidone K30 (PVP), plasticizers (PEG 400), and drug. In addition, using terpenes as enhancers could increase the flux of the drug. Menthol showed the highest enhancement effect on the flux of arecoline.
Formulation Optimization of Arecoline Patches
Directory of Open Access Journals (Sweden)
Pao-Chu Wu
2014-01-01
Full Text Available The response surface methodology (RSM including polynomial equations has been used to design an optimal patch formulation with appropriate adhesion and flux. The patch formulations were composed of different polymers, including Eudragit RS 100 (ERS, Eudragit RL 100 (ERL and polyvinylpyrrolidone K30 (PVP, plasticizers (PEG 400, and drug. In addition, using terpenes as enhancers could increase the flux of the drug. Menthol showed the highest enhancement effect on the flux of arecoline.
Niosomal Formulation Of Orlistat: Formulation And In-Vitro Evaluation
Directory of Open Access Journals (Sweden)
SAMYUKTHA RANI. B
2011-06-01
Full Text Available The purpose of the research was to prepare Orlistat niosomes from proniosome to improve its poor and variable oral bioavailability. The non-ionic surfactant vesicles are prepared by the reverse phase evaporation technique (slurry method. The slurry of - Cyclodextrin and Span 60 was dried to form a free flowing powder in rotary flash evaporator which could be rehydrated by addition of buffer (0.5% NaCl with 3% SLS at pH 6.0. The lipid mixture consisted of cholesterol, Span 60 and - Cyclodextrin carrier in molar ratios of (0.1:0.9:1 to 0.9:0.1:1 respectively. The niosomal formulations were evaluated for particle size, entrapment efficiency, in-vitro drug release, release kinetics, Interactions and compatibility (FT-IR, surface morphology (SEM, stability studies, conductivity and sedimentation rate, pH density, viscosity. The formulation OT9 which showed higher entrapment efficiency of 44.09% and invitro releases of 94.59% at the end of 12hrs was found to be best among all the 9 formulations. Release was best fitted with Hixson kinetics and it shows that the drug release may follow diffusion mechanism. FT-IR data revealed that, compatible and there were no interactions between the drug and excipients added in the formulation. SEM images of niosomes with various magnifications revealed the mean size of the niosomes were 100 nm with smooth surface. Niosome formulation has showed appropriate stability for 90 days by storing the formulation at room temperature. Thus the niosomal formulations could be a promising delivery system for Orlistat with improved oral bioavailability, stability and for sustained drug release.
Threshold corrections, generalised prepotentials and Eichler integrals
Directory of Open Access Journals (Sweden)
Carlo Angelantonj
2015-08-01
Full Text Available We continue our study of one-loop integrals associated to BPS-saturated amplitudes in N=2 heterotic vacua. We compute their large-volume behaviour, and express them as Fourier series in the complexified volume, with Fourier coefficients given in terms of Niebur–Poincaré series in the complex structure modulus. The closure of Niebur–Poincaré series under modular derivatives implies that such integrals derive from holomorphic prepotentials fn, generalising the familiar prepotential of N=2 supergravity. These holomorphic prepotentials transform anomalously under T-duality, in a way characteristic of Eichler integrals. We use this observation to compute their quantum monodromies under the duality group. We extend the analysis to modular integrals with respect to Hecke congruence subgroups, which naturally arise in compactifications on non-factorisable tori and freely-acting orbifolds. In this case, we derive new explicit results including closed-form expressions for integrals involving the Γ0(N Hauptmodul, a full characterisation of holomorphic prepotentials including their quantum monodromies, as well as concrete formulæ for holomorphic Yukawa couplings.
Bioavailability of cefuroxime axetil formulations.
Donn, K H; James, N C; Powell, J R
1994-06-01
Cefuroxime axetil tablets have proved effective for the treatment of a variety of community-acquired infections. A suspension formulation has been developed for use in children. Two studies have been conducted to determine if the cefuroxime axetil formulations are bioequivalent. In the initial randomized, two-period crossover study, 24 healthy men received 250-mg doses of suspension and tablet formulations of cefuroxime axetil every 12 h after eating for seven doses. Each treatment period was separated by 4 days. Comparisons of serum and urine pharmacokinetic parameters indicated that the suspension and tablet formulations of cefuroxime axetil are not bioequivalent. Following the initial bioequivalency study, 0.1 % sodium lauryl sulfate (SLS) was added to the suspension to assure the homogeneity of the granules during the manufacturing process. In the subsequent randomized, three-period crossover study, 24 healthy men received single 250-mg doses of three cefuroxime axetil formulations: suspension without SLS, suspension with SLS, and tablet. Again each treatment period was separated by 4 days. Pharmacokinetic analyses demonstrated that while the suspension with SLS and suspension without SLS are bioequivalent, bioequivalence between the suspension with SLS and the tablet was not observed. Thus, the addition of the SLS surfactant to the suspension did not alter the bioavailability of the formulation.
1983-04-01
speculation that such an ideal condition might not occur in an actual test situation, further tests were conducted to determine whether the...TYPE: POOL FUEL TYPE: .JP4 FUEL FLOW RATE; N/A EXTINGUISHANT: C02 RUN1Cn AIR TEMPERATURE: VARIOUS 4 .. i00 PUNtOS RUN117 .110 2 30 4065 VOLUME I
Absorbed fractions for electrons in ellipsoidal volumes
Amato, E.; Lizio, D.; Baldari, S.
2011-01-01
We applied a Monte Carlo simulation in Geant4 in order to calculate the absorbed fractions for monoenergetic electrons in the energy interval between 10 keV and 2 MeV, uniformly distributed in ellipsoids made from soft tissue. For each volume, we simulated a spherical shape, four oblate and four prolate ellipsoids, and one scalene shape. For each energy and for every geometrical configuration, an analytical relationship between the absorbed fraction and a 'generalized radius' was found, and the dependence of the fit parameters from electron energy is discussed and fitted by proper parametric functions. With the proposed formulation, the absorbed fraction for electrons in the 10-2000 keV energy range can be calculated for all volumes and for every ellipsoidal shape of practical interest. This method can be directly applied to evaluation of the absorbed fraction from the radionuclide emission of monoenergetic electrons, such as Auger or conversion electrons. The average deposited energy per disintegration in the case of extended beta spectra can be evaluated through integration. Two examples of application to a pure beta emitter such as 90Y and to 131I, whose emission include monoenergetic and beta electrons plus gamma photons, are presented. This approach represent a generalization of our previous studies, allowing a comprehensive treatment of absorbed fractions from electron and photon sources uniformly distributed in ellipsoidal volumes of any ellipticity and volume, in the whole range of practical interest for internal dosimetry in nuclear medicine applications, as well as in radiological protection estimations of doses from an internal contamination.
An Entropic Formulation of Tunneling Time
Demir, Durmus A
2015-01-01
Quantum tunneling governs numerous phenomena in biology, chemistry, physics and technology. Tunneling time, formulated in various different forms due to the absence of a time operator in quantum theory, has been measured recently in experiments based on the attoclock in ultrafast laser ionization of Helium atoms [A.~Landsman {\\it et al.}, Optica {\\bf 1}, 343 (2014)]. The experiment performs a refined measurement with which no tunneling time formula in the literature exhibits adequate congruence. Here we show that, entropic considerations lead to a real tunneling time which shows remarkable agreement with the experimental data and stays always subluminal. Indeed, with phase space volume setting the number of microstates for a single evanescing particle in a state of definite momentum consistent with energy conservation, one is naturally led to a statistical description for quantum tunneling in which thermal energy sets the tunneling time. This entropic tunneling time is rather general and might also be extende...
1975-01-01
EVA crewman/equipment translational concepts are developed for a shuttle orbiter payload application. Also considered are EVA workstation systems to meet orbiter and payload requirements for integration of workstations into candidate orbiter payload worksites.
Consistent finite-volume discretization of hydrodynamic conservation laws for unstructured grids
Energy Technology Data Exchange (ETDEWEB)
Burton, D.E.
1994-10-17
We consider the conservation properties of a staggered-grid Lagrange formulation of the hydrodynamics equations (SGH). Hydrodynamics algorithms are often formulated in a relatively ad hoc manner in which independent discretizations are proposed for mass, momentum, energy, and so forth. We show that, once discretizations for mass and momentum are stated, the remaining discretizations are very nearly uniquely determined, so there is very little latitude for variation. As has been known for some time, the kinetic energy discretization must follow directly from the momentum equation; and the internal energy must follow directly from the energy currents affecting the kinetic energy. A fundamental requirement (termed isentropicity) for numerical hydrodynamics algorithms is the ability to remain on an isentrope in the absence of heating or viscous forces and in the limit of small timesteps. We show that the requirements of energy conservation and isentropicity lead to the replacement of the usual volume calculation with a conservation integral. They further forbid the use of higher order functional representations for either velocity or stress within zones or control volumes, forcing the use of a constant stress element and a constant velocity control volume. This, in turn, causes the point and zone coordinates to formally disappear from the Cartesian formulation. The form of the work equations and the requirement for dissipation by viscous forces strongly limits the possible algebraic forms for artificial viscosity. The momentum equation and a center-of-mass definition lead directly to an angular momentum conservation law that is satisfied by the system. With a few straightforward substitutions, the Cartesian formulation can be converted to a multidimensional curvilinear one. The formulation in 2D symmetric geometry preserves rotational symmetry.
Social Groupwork. A Model for Goal Formulation.
Tompkins, Rosamond P.; Gallo, Frank T.
1978-01-01
A conceptual model for goal formulation in social groupwork, discussion of existing models and their limitations, and an attempt to formulate an encompassing groupwork model that facilitates goal formulation. (Author/PD)
Stabilisation de la formule des traces tordue
Moeglin, Colette
2016-01-01
Ce travail en deux volumes donne la preuve de la stabilisation de la formule des trace tordue. Stabiliser la formule des traces tordue est la méthode la plus puissante connue actuellement pour comprendre l'action naturelle du groupe des points adéliques d'un groupe réductif, tordue par un automorphisme, sur les formes automorphes de carré intégrable de ce groupe. Cette compréhension se fait en réduisant le problème, suivant les idées de Langlands, à des groupes plus petits munis d'un certain nombre de données auxiliaires; c'est ce que l'on appelle les données endoscopiques. L'analogue non tordu a été résolu par J. Arthur et dans ce livre on suit la stratégie de celui-ci. Publier ce travail sous forme de livre permet de le rendre le plus complet possible. Les auteurs ont repris la théorie de l'endoscopie tordue développée par R. Kottwitz et D. Shelstad et par J.-P. Labesse. Ils donnent tous les arguments des démonstrations même si nombre d'entre eux se trouvent déjà dans les travaux d'Ar...
Tactile friction of topical formulations.
Skedung, L; Buraczewska-Norin, I; Dawood, N; Rutland, M W; Ringstad, L
2016-02-01
The tactile perception is essential for all types of topical formulations (cosmetic, pharmaceutical, medical device) and the possibility to predict the sensorial response by using instrumental methods instead of sensory testing would save time and cost at an early stage product development. Here, we report on an instrumental evaluation method using tactile friction measurements to estimate perceptual attributes of topical formulations. Friction was measured between an index finger and an artificial skin substrate after application of formulations using a force sensor. Both model formulations of liquid crystalline phase structures with significantly different tactile properties, as well as commercial pharmaceutical moisturizing creams being more tactile-similar, were investigated. Friction coefficients were calculated as the ratio of the friction force to the applied load. The structures of the model formulations and phase transitions as a result of water evaporation were identified using optical microscopy. The friction device could distinguish friction coefficients between the phase structures, as well as the commercial creams after spreading and absorption into the substrate. In addition, phase transitions resulting in alterations in the feel of the formulations could be detected. A correlation was established between skin hydration and friction coefficient, where hydrated skin gave rise to higher friction. Also a link between skin smoothening and finger friction was established for the commercial moisturizing creams, although further investigations are needed to analyse this and correlations with other sensorial attributes in more detail. The present investigation shows that tactile friction measurements have potential as an alternative or complement in the evaluation of perception of topical formulations. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Well-balanced finite volume evolution Galerkin methods for the shallow water equations
Lukáčová-Medvid'ová, M.; Noelle, S.; Kraft, M.
2007-01-01
We present a new well-balanced finite volume method within the framework of the finite volume evolution Galerkin (FVEG) schemes. The methodology will be illustrated for the shallow water equations with source terms modelling the bottom topography and Coriolis forces. Results can be generalized to more complex systems of balance laws. The FVEG methods couple a finite volume formulation with approximate evolution operators. The latter are constructed using the bicharacteristics of multidimensional hyperbolic systems, such that all of the infinitely many directions of wave propagation are taken into account explicitly. We derive a well-balanced approximation of the integral equations and prove that the FVEG scheme is well-balanced for the stationary steady states as well as for the steady jets in the rotational frame. Several numerical experiments for stationary and quasi-stationary states as well as for steady jets confirm the reliability of the well-balanced FVEG scheme.
A Tensor-Train accelerated solver for integral equations in complex geometries
Corona, Eduardo; Rahimian, Abtin; Zorin, Denis
2017-04-01
We present a framework using the Quantized Tensor Train (QTT) decomposition to accurately and efficiently solve volume and boundary integral equations in three dimensions. We describe how the QTT decomposition can be used as a hierarchical compression and inversion scheme for matrices arising from the discretization of integral equations. For a broad range of problems, computational and storage costs of the inversion scheme are extremely modest O (log N) and once the inverse is computed, it can be applied in O (Nlog N) . We analyze the QTT ranks for hierarchically low rank matrices and discuss its relationship to commonly used hierarchical compression techniques such as FMM and HSS. We prove that the QTT ranks are bounded for translation-invariant systems and argue that this behavior extends to non-translation invariant volume and boundary integrals. For volume integrals, the QTT decomposition provides an efficient direct solver requiring significantly less memory compared to other fast direct solvers. We present results demonstrating the remarkable performance of the QTT-based solver when applied to both translation and non-translation invariant volume integrals in 3D. For boundary integral equations, we demonstrate that using a QTT decomposition to construct preconditioners for a Krylov subspace method leads to an efficient and robust solver with a small memory footprint. We test the QTT preconditioners in the iterative solution of an exterior elliptic boundary value problem (Laplace) formulated as a boundary integral equation in complex, multiply connected geometries.
Energy Technology Data Exchange (ETDEWEB)
1978-03-22
This volume supplements Vol. 2 and consists entirely of computer printouts. The report consists of three parts: (1) hourly log of plant simulation based on 1982 ICES Community, with thermal storage, on-peak and off-peak electric generation, and 80% maximum kW trip-off; (2) same as (1) except without thermal storage; and (3) hourly load and demand profiles--1979, 1980, and 1982 ICES communities.
Finite Volume Evolution Galerkin Methods for Nonlinear Hyperbolic Systems
Lukáčová-Medvid'ová, M.; Saibertová, J.; Warnecke, G.
2002-12-01
We present new truly multidimensional schemes of higher order within the frame- work of finite volume evolution Galerkin (FVEG) methods for systems of nonlinear hyperbolic conservation laws. These methods couple a finite volume formulation with approximate evolution operators. The latter are constructed using the bicharacteristics of the multidimensional hyperbolic system, such that all of the infinitely many directions of wave propagation are taken into account. Following our previous results for the wave equation system, we derive approximate evolution operators for the linearized Euler equations. The integrals along the Mach cone and along the cell interfaces are evaluated exactly, as well as by means of numerical quadratures. The influence of these numerical quadratures will be discussed. Second-order resolution is obtained using a conservative piecewise bilinear recovery and the midpoint rule approximation for time integration. We prove error estimates for the finite volume evolution Galerkin scheme for linear systems with constant coefficients. Several numerical experiments for the nonlinear. Euler equations, which confirm the accuracy and good multidimensional behavior of the FVEG schemes, are presented as well.
Reintroducing radiometric surface temperature into the Penman-Monteith formulation
DEFF Research Database (Denmark)
Mallick, Kaniska; Bøgh, Eva; Trebs, Ivonne;
2015-01-01
Here we demonstrate a novel method to physically integrate radiometric surface temperature (TR) into the Penman-Monteith (PM) formulation for estimating the terrestrial sensible and latent heat fluxes (H and λE) in the framework of a modified Surface Temperature Initiated Closure (STIC). It combi...
Multidimensional singular integrals and integral equations
Mikhlin, Solomon Grigorievich; Stark, M; Ulam, S
1965-01-01
Multidimensional Singular Integrals and Integral Equations presents the results of the theory of multidimensional singular integrals and of equations containing such integrals. Emphasis is on singular integrals taken over Euclidean space or in the closed manifold of Liapounov and equations containing such integrals. This volume is comprised of eight chapters and begins with an overview of some theorems on linear equations in Banach spaces, followed by a discussion on the simplest properties of multidimensional singular integrals. Subsequent chapters deal with compounding of singular integrals
Applications of the IAPWS-95 formulation in fluid inclusion and mineral-fluid phase equilibria
Directory of Open Access Journals (Sweden)
Lanlan Shi
2012-01-01
Full Text Available The IAPWS-95 formulation explicit in Helmholtz free energy proposed by Wagner and Pruβ (2002 is the best equation of state of water, from which all thermodynamic properties can be obtained over a wide T–p range from 273.16 to 1273 K and from 0 to 1000 MPa with experimental accuracy. This paper reports the applications of the IAPWS-95 formulation in fluid inclusion and mineral-water phase equilibria. A reliable and highly efficient calculation method is presented for the saturated properties of water so that the formulation can be conveniently applied in the study of fluid inclusion, such as calculating homogenization pressures, homogenization densities (or molar volumes, volume fractions and isochores. Meanwhile, the univariant curves of some mineral-dehydration reactions are calculated based on the IAPWS-95 formulation. The computer code of the IAPWS-95 formulation can be obtained from the corresponding author.
Formulations of Amlodipine: A Review
Directory of Open Access Journals (Sweden)
Muhammad Ali Sheraz
2016-01-01
Full Text Available Amlodipine (AD is a calcium channel blocker that is mainly used in the treatment of hypertension and angina. However, latest findings have revealed that its efficacy is not only limited to the treatment of cardiovascular diseases as it has shown to possess antioxidant activity and plays an important role in apoptosis. Therefore, it is also employed in the treatment of cerebrovascular stroke, neurodegenerative diseases, leukemia, breast cancer, and so forth either alone or in combination with other drugs. AD is a photosensitive drug and requires protection from light. A number of workers have tried to formulate various conventional and nonconventional dosage forms of AD. This review highlights all the formulations that have been developed to achieve maximum stability with the desired therapeutic action for the delivery of AD such as fast dissolving tablets, floating tablets, layered tablets, single-pill combinations, capsules, oral and transdermal films, suspensions, emulsions, mucoadhesive microspheres, gels, transdermal patches, and liposomal formulations.
Energy Technology Data Exchange (ETDEWEB)
Feurer, D.A.; Weaver, C.L.
1981-01-01
A detailed description is given of the laws and programs of the State of Oklahoma governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities, Volume One: An Overview. This report also contains a summary of a strategy described in Volume One: An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.
Covariant Formulations of Superstring Theories.
Mikovic, Aleksandar Radomir
1990-01-01
Chapter 1 contains a brief introduction to the subject of string theory, and tries to motivate the study of superstrings and covariant formulations. Chapter 2 describes the Green-Schwarz formulation of the superstrings. The Hamiltonian and BRST structure of the theory is analysed in the case of the superparticle. Implications for the superstring case are discussed. Chapter 3 describes the Siegel's formulation of the superstring, which contains only the first class constraints. It is shown that the physical spectrum coincides with that of the Green-Schwarz formulation. In chapter 4 we analyse the BRST structure of the Siegel's formulation. We show that the BRST charge has the wrong cohomology, and propose a modification, called first ilk, which gives the right cohomology. We also propose another superparticle model, called second ilk, which has infinitely many coordinates and constraints. We construct the complete BRST charge for it, and show that it gives the correct cohomology. In chapter 5 we analyse the properties of the covariant vertex operators and the corresponding S-matrix elements by using the Siegel's formulation. We conclude that the knowledge of the ghosts is necessary, even at the tree level, in order to obtain the correct S-matrix. In chapter 6 we attempt to calculate the superstring loops, in a covariant gauge. We calculate the vacuum-to -vacuum amplitude, which is also the cosmological constant. We show that it vanishes to all loop orders, under the assumption that the free covariant gauge-fixed action exists. In chapter 7 we present our conclusions, and briefly discuss the random lattice approach to the string theory, as a possible way of resolving the problem of the covariant quantization and the nonperturbative definition of the superstrings.
New Poisson's Type Integral Formula for Thermoelastic Half-Space
Directory of Open Access Journals (Sweden)
Victor Seremet
2009-01-01
Full Text Available A new Green's function and a new Poisson's type integral formula for a boundary value problem (BVP in thermoelasticity for a half-space with mixed boundary conditions are derived. The thermoelastic displacements are generated by a heat source, applied in the inner points of the half-space and by temperature, and prescribed on its boundary. All results are obtained in closed forms that are formulated in a special theorem. A closed form solution for a particular BVP of thermoelasticity for a half-space also is included. The main difficulties to obtain these results are in deriving of functions of influence of a unit concentrated force onto elastic volume dilatation Θ( and, also, in calculating of a volume integral of the product of function Θ( and Green's function in heat conduction. Using the proposed approach, it is possible to extend the obtained results not only for any canonical Cartesian domain, but also for any orthogonal one.
A comparison of two formulations of the fin efficiency for straight fins
Momoniat, Ebrahim
2012-04-01
A formulation of the fin efficiency based on Newton's law of cooling is compared with a formulation based on a ratio of heat transferred from the fin surface to the surrounding fluid to the heat conducted through the base. The first formulation requires that the solution of the nonlinear fin equations for constant heat transfer coefficient and constant thermal conductivity is known, whilst the second formulation of the fin efficiency requires only that a first integral of the model equation is known. This paper shows the first formulation of the fin efficiency contains approximation errors as only power series and approximate solutions to the nonlinear fin equations have been determined. The second formulation of the fin efficiency is exact when the first integrals can be determined.
A comparison of two formulations of the fin efficiency for straight fins
Institute of Scientific and Technical Information of China (English)
Ebrahim Momoniat
2012-01-01
A formulation of the fin efficiency based on Newton's law of cooling is compared with a formulation based on a ratio of heat transferred from the fin surface to the surrounding fluid to the heat conducted through the base.The first formulation requires that the solution of the nonlinear fin equations for constant heat transfer coefficient and constant thermal conductivity is known,whilst the second formulation of the fin efficiency requires only that a first integral of the model equation is known.This paper shows the first formulation of the fin efficiency contains approximation errors as only power series and approximate solutions to the nonlinear fin equations have been determined.The second formulation of the fin efficiency is exact when the first integrals can be determined.
Energy Technology Data Exchange (ETDEWEB)
None
1978-03-22
A comprehensive study of the design, economics, financing, environmental effects and feasibility of installing a diesel generator Integrated Community Energy System (ICES) to supply co-generated heat and electric power to buildings on the Clark University campus in Massachusetts is reported. It is concluded that the Clark ICES system is a generally attractive project, and that funding for it should be sought. (LCL)
Srinivasan, Hari; Yamanis, Jean; Welch, Rick; Tulyani, Sonia; Hardin, Larry
2006-01-01
The objective of this contract effort was to define the functionality and evaluate the propulsion and power system benefits derived from a Solid Oxide Fuel Cell (SOFC) based Auxiliary Power Unit (APU) for a future long range commercial aircraft, and to define the technology gaps to enable such a system. The study employed technologies commensurate with Entry into Service (EIS) in 2015. United Technologies Corporation (UTC) Integrated Total Aircraft Power System (ITAPS) methodologies were used to evaluate system concepts to a conceptual level of fidelity. The technology benefits were captured as reductions of the mission fuel burn and emissions. The baseline aircraft considered was the Boeing 777-200ER airframe with more electric subsystems, Ultra Efficient Engine Technology (UEET) engines, and an advanced APU with ceramics for increased efficiency. In addition to the baseline architecture, four architectures using an SOFC system to replace the conventional APU were investigated. The mission fuel burn savings for Architecture-A, which has minimal system integration, is 0.16 percent. Architecture-B and Architecture-C employ greater system integration and obtain fuel burn benefits of 0.44 and 0.70 percent, respectively. Architecture-D represents the highest level of integration and obtains a benefit of 0.77 percent.
Energy Technology Data Exchange (ETDEWEB)
Hein, K.R.G.; Minchener, A.J.; Pruschek, R.; Roberts, P.A. [eds.
1998-12-31
Methods of enhancing the efficiency of integrated gasification combined cycle (IGCC) power plants were investigated under the JOULE II extension project JOU2-CT94-0454. These included thermodynamic analysis of measures for efficiency enhancement, and development and design of advanced heat recovery steam generator. All 3 papers have been abstracted separately.
Breidbach, Stephan, Ed.; Viebrock, Britta, Ed.
2013-01-01
Content and Language Integrated Learning has received a strong tailwind in European educational and language policies. It is on the verge of becoming a mainstream phenomenon. However, an overly speedy implementation of "CLIL for all" might bear a number of risks for all groups of stakeholders. The purpose of this book is to link the…
Heal, Laird W.; And Others
The appendix is a guide to the curriculum and training procedures of the Integrated Management of Cerebral Palsy project which evaluated the effectiveness of a program of conductive education. Introductory sections provide an overview of conductive education (training motorically disabled children in small, motivating groups of similarly…
Breidbach, Stephan, Ed.; Viebrock, Britta, Ed.
2013-01-01
Content and Language Integrated Learning has received a strong tailwind in European educational and language policies. It is on the verge of becoming a mainstream phenomenon. However, an overly speedy implementation of "CLIL for all" might bear a number of risks for all groups of stakeholders. The purpose of this book is to link the…
Directory of Open Access Journals (Sweden)
Barreira N
2005-01-01
Full Text Available The topological active volumes (TAVs model is a general model for 3D image segmentation. It is based on deformable models and integrates features of region-based and boundary-based segmentation techniques. Besides segmentation, it can also be used for surface reconstruction and topological analysis of the inside of detected objects. The TAV structure is flexible and allows topological changes in order to improve the adjustment to object's local characteristics, find several objects in the scene, and identify and delimit holes in detected structures. This paper describes the main features of the TAV model and shows its ability to segment volumes in an automated manner.
Eulerian Formulation of Spatially Constrained Elastic Rods
Huynen, Alexandre
Slender elastic rods are ubiquitous in nature and technology. For a vast majority of applications, the rod deflection is restricted by an external constraint and a significant part of the elastic body is in contact with a stiff constraining surface. The research work presented in this doctoral dissertation formulates a computational model for the solution of elastic rods constrained inside or around frictionless tube-like surfaces. The segmentation strategy adopted to cope with this complex class of problems consists in sequencing the global problem into, comparatively simpler, elementary problems either in continuous contact with the constraint or contact-free between their extremities. Within the conventional Lagrangian formulation of elastic rods, this approach is however associated with two major drawbacks. First, the boundary conditions specifying the locations of the rod centerline at both extremities of each elementary problem lead to the establishment of isoperimetric constraints, i.e., integral constraints on the unknown length of the rod. Second, the assessment of the unilateral contact condition requires, in principle, the comparison of two curves parametrized by distinct curvilinear coordinates, viz. the rod centerline and the constraint axis. Both conspire to burden the computations associated with the method. To streamline the solution along the elementary problems and rationalize the assessment of the unilateral contact condition, the rod governing equations are reformulated within the Eulerian framework of the constraint. The methodical exploration of both types of elementary problems leads to specific formulations of the rod governing equations that stress the profound connection between the mechanics of the rod and the geometry of the constraint surface. The proposed Eulerian reformulation, which restates the rod local equilibrium in terms of the curvilinear coordinate associated with the constraint axis, describes the rod deformed configuration
The Three-Dimensional Finite-Volume Non-Hydrostatic Icosahedral Model (NIM)
Lee, J. L.; MacDonald, A. E.
2014-12-01
A multi-scales Non-hydrostatic Icosahedral Model (NIM) has been developed at Earth System Research Laboratory (ESRL) to meet NOAA's future prediction mission ranging from mesoscale short-range, high-impact weather forecasts to longer-term intra-seasonal climate prediction. NIM formulates the latest numerical innovation of the three-dimensional finite-volume control volume on the quasi-uniform icosahedral grid suitable for ultra-high resolution simulations. NIM is designed to utilize the state-of-art computing architecture such as Graphic Processing Units (GPU) processors to run globally at kilometer scale resolution to explicitly resolve convective storms and complex terrains. The novel features of NIM numerical design include: 1.1. A local coordinate system upon which finite-volume integrations are undertaken. The use of a local Cartesian coordinate greatly simplifies the mathematic formulation of the finite-volume operators and leads to the finite-volume integration along straight lines on the plane, rather than along curved lines on the spherical surface. 1.2. A general indirect addressing scheme developed for modeling on irregular grid. It arranges the icosahedral grid with a one-dimensional vector loop structure, table specified memory order, and an indirect addressing scheme that yields very compact code despite the complexities of this grid. 1.3. Use of three-dimensional finite-volume integration over control volumes constructed on the height coordinates. Three-dimensional finite-volume integration accurately represents the Newton Third Law over terrain and improves pressure gradient force over complex terrain. 1.4. Use of the Runge-Kutta 4th order conservative and positive-definite transport scheme 1.5. NIM dynamical solver has been implemented on CPU as well as GPU. As one of the potential candidates for NWS next generation models, NIM dynamical core has been successfully verified with various benchmark test cases including those proposed by DCMIP
Formulating Policy for Summer Schools.
Marriot, Helen
1991-01-01
Explores issues relating to the formulation of policy for summer programs for language learning, describing one university's experience with student demand, student motivation and progress, course timing and structure, academic staffing, administrative organization, student and staff evaluation, and funding. (three references) (CB)
Hyperbolic Formulation of General Relativity
Abrahams, A M; Choquet-Bruhat, Y; York, J W; Abrahams, Andrew; Anderson, Arlen; Choquet-Bruhat, Yvonne; York, James W.
1998-01-01
Two geometrical well-posed hyperbolic formulations of general relativity are described. One admits any time-slicing which preserves a generalized harmonic condition. The other admits arbitrary time-slicings. Both systems have only the physical characteristic speeds of zero and the speed of light.
Energy Technology Data Exchange (ETDEWEB)
Robin, A.M.; Kassman, J.S.; Leininger, T.F.; Wolfenbarger, J.K.; Wu, C.M.; Yang, P.P.
1991-09-01
This second Topical Report describes the work that was completed between January 1, 1989 and December 31, 1990 in a Cooperative Agreement between Texaco and the US Department of Energy that began on September 30, 1987. During the period that is covered in this report, the development and optimization of in-situ and external desulfurization processes were pursued. The research effort included bench scale testing, PDU scoping tests, process economic studies and advanced instrument testing. Two bench scale studies were performed at the Research Triangle Institute with zinc titanate sorbent to obtain data on its cycle life, sulfur capacity, durability and the effect of chlorides. These studies quantify sulfur capture during simulated air and oxygen-blown gasification for two zinc titanate formulations. Eight PDU runs for a total of 20 days of operation were conducted to evaluate the performance of candidate sorbents for both in-situ and external desulfurization. A total of 47 tests were completed with oxygen and air-blown gasification. Candidate sorbents included iron oxide for in-situ desulfurization and calcium based and mixed metal oxides for external desulfurization. Gasifier performance and sorbent sulfur capture are compared for both air-blown and oxygen-blown operation.
Energy Technology Data Exchange (ETDEWEB)
Robin, A.M.; Kassman, J.S.; Leininger, T.F.; Wolfenbarger, J.K.; Wu, C.M.; Yang, P.P.
1991-09-01
This second Topical Report describes the work that was completed between January 1, 1989 and December 31, 1990 in a Cooperative Agreement between Texaco and the US Department of Energy that began on September 30, 1987. During the period that is covered in this report, the development and optimization of in-situ and external desulfurization processes were pursued. The research effort included bench scale testing, PDU scoping tests, process economic studies and advanced instrument testing. Two bench scale studies were performed at the Research Triangle Institute with zinc titanate sorbent to obtain data on its cycle life, sulfur capacity, durability and the effect of chlorides. These studies quantify sulfur capture during simulated air and oxygen-blown gasification for two zinc titanate formulations. Eight PDU runs for a total of 20 days of operation were conducted to evaluate the performance of candidate sorbents for both in-situ and external desulfurization. A total of 47 tests were completed with oxygen and air-blown gasification. Candidate sorbents included iron oxide for in-situ desulfurization and calcium based and mixed metal oxides for external desulfurization. Gasifier performance and sorbent sulfur capture are compared for both air-blown and oxygen-blown operation.
1991-01-01
Viewgraphs of briefings presented at the SSTAC/ARTS review of the draft Integrated Technology Plan (ITP) on aerothermodynamics, automation and robotics systems, sensors, and high-temperature superconductivity are included. Topics covered include: aerothermodynamics; aerobraking; aeroassist flight experiment; entry technology for probes and penetrators; automation and robotics; artificial intelligence; NASA telerobotics program; planetary rover program; science sensor technology; direct detector; submillimeter sensors; laser sensors; passive microwave sensing; active microwave sensing; sensor electronics; sensor optics; coolers and cryogenics; and high temperature superconductivity.
Supersymmetric quantum mechanics on the lattice: I. Loop formulation
Directory of Open Access Journals (Sweden)
David Baumgartner
2015-05-01
Full Text Available Simulations of supersymmetric field theories on the lattice with (spontaneously broken supersymmetry suffer from a fermion sign problem related to the vanishing of the Witten index. We propose a novel approach which solves this problem in low dimensions by formulating the path integral on the lattice in terms of fermion loops. For N=2 supersymmetric quantum mechanics the loop formulation becomes particularly simple and in this paper – the first in a series of three – we discuss in detail the reformulation of this model in terms of fermionic and bosonic bonds for various lattice discretisations including one which is Q-exact.
Supersymmetric quantum mechanics on the lattice: I. Loop formulation
Baumgartner, David
2014-01-01
Simulations of supersymmetric field theories on the lattice with (spontaneously) broken supersymmetry suffer from a fermion sign problem related to the vanishing of the Witten index. We propose a novel approach which solves this problem in low dimensions by formulating the path integral on the lattice in terms of fermion loops. For N = 2 supersymmetric quantum mechanics the loop formulation becomes particularly simple and in this paper - the first in a series of three - we discuss in detail the reformulation of this model in terms of fermionic and bosonic bonds for various lattice discretisations including one which is Q-exact.
Fundamental formulation for frictional contact with graded materials
Institute of Scientific and Technical Information of China (English)
无
2009-01-01
In the paper, we develop the fundamental solutions for a graded half-plane subjected to concentrated forces acting perpendicularly and parallel to the surface. In the solutions, Young’s modulus is assumed to vary in the form of E(y)=E0eαy and Poisson’s ratio is assumed to be constant. On the basis of the fundamental solutions, the singular integral equations are formulated for the unknown traction distributions with Green’s function method. From the fundamental integral equations, a series of integral equat...
Tangent bundle formulation of a charged gas
Sarbach, Olivier
2013-01-01
We discuss the relativistic kinetic theory for a simple, collisionless, charged gas propagating on an arbitrary curved spacetime geometry. Our general relativistic treatment is formulated on the tangent bundle of the spacetime manifold and takes advantage of its rich geometric structure. In particular, we point out the existence of a natural metric on the tangent bundle and illustrate its role for the development of the relativistic kinetic theory. This metric, combined with the electromagnetic field of the spacetime, yields an appropriate symplectic form on the tangent bundle. The Liouville vector field arises as the Hamiltonian vector field of a natural Hamiltonian. The latter also defines natural energy surfaces, called mass shells, which turn out to be smooth Lorentzian submanifolds. A simple, collisionless, charged gas is described by a distribution function which is defined on the mass shell and satisfies the Liouville equation. Suitable fibre integrals of the distribution function define observable fie...
Institute of Scientific and Technical Information of China (English)
陈景波
2004-01-01
Based on the Lagrangian density and covariant Legendre transform, we obtain the multisymplectic Hamiltonian formulation for a one-way seismic wave equation of high-order approximation. This formulation provides a new perspective for studying the one-way seismic wave equation. A multisymplectic integrator is also derived.
Energy Technology Data Exchange (ETDEWEB)
Monteleone, S. [comp.] [Brookhaven National Lab., Upton, NY (United States)
1994-04-01
This three-volume report contains 90 papers out of the 102 that were presented at the Twenty-First Water Reactor Safety Information Meeting held at the Bethesda Marriott Hotel, Bethesda, Maryland, during the week of October 25-27, 1993. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from France, Germany, Japan, Russia, Switzerland, Taiwan, and United Kingdom. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final program of the meeting. Selected papers were indexed separately for inclusion in the Energy Science and Technology Database.
Energy Technology Data Exchange (ETDEWEB)
1978-11-01
The preliminary design and cost analysis of a proposed Integrated Community Energy System (ICES) to serve a multi-million square footage medical complex of the Health Education Authority of Louisiana are presented. This ICES is designed as a multi-fuel plant (coal or natural gas), operation is to begin in 1982, and the system will initially supply 40 x 10/sup 6/ kWh of electric power and 854 x 10/sup 0/ lbs of steam annually to meet the heating, refrigeration, and power demands of the complex. The total construction cost of the ICES is estimated as $35 million. (LCL)
Haynes, S.H.; O'Brien, W.H.; Kaholokula, J.K.; Witteman, C.L.M.
2012-01-01
This paper discusses and integrates concepts of causality in psychopathology, clinical assessment, clinical case formulation and the functional analysis. We propose that identifying causal variables, relations and mechanisms in psychopathology and clinical assessment can lead to more powerful and e
Directory of Open Access Journals (Sweden)
Soni Hardik
2014-06-01
Conclusion: The findings of this study concludes that Herbo-mineral formulation has promising effect on testosterone propionate-induced BPH in male wistar rats. [J Exp Integr Med 2014; 4(2.000: 131-136
Degradation and failure of bolting in nuclear power plants: Volume 1
Energy Technology Data Exchange (ETDEWEB)
Nickell, R.E.
1988-04-01
These two volumes provide the documentation for industry resolution of the US Nuclear Regulatory Commission (NRC) generic issue B-29, Degradation and Failure of Bolting in Nuclear Power Plants. The issue was identified as a consequence of concerns about the structural integrity of component supports circa 1980. When bolting integrity became a separate issue in 1982, the utility industry responded by forming a Task Group on Bolting under the aegis of the Atomic Industrial Forum (AIF) and the Materials Properties Council (MPC). The AIF/MPC Task Group on Bolting formulated a comprehensive nineteen-task action plan aimed at resolution of the issue, with implementation of the plan, the responsibility of EPRI and the affected Owner's Groups. EPRI organized a matrix-managed Generic Bolted Joint Integrity Program to carry out the research, with the results reported herein.
Cartier, Pierre; DeWitt-Morette, Cecile
2010-06-01
Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.
Energy Technology Data Exchange (ETDEWEB)
Jones, J.L.; Calley, M.B.; Capps, E.L.; Zeigler, S.L.; Galyean, W.J.; Novack, S.D.; Smith, C.L.; Wolfram, L.M. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)
1995-03-01
A verification and validation (V&V) process has been performed for the System Analysis Programs for Hands-on Integrated Reliability Evaluation (SAPHIRE) Version 5.0. SAPHIRE is a set of four computer programs that NRC developed for performing probabilistic risk assessments. They allow an analyst to perform many of the functions necessary to create, quantify, and evaluate the risk associated with a facility or process being analyzed. The programs are Integrated Reliability and Risk Analysis System (IRRAS) System Analysis and Risk Assessment (SARA), Models And Results Database (MAR-D), and Fault tree, Event tree, and Piping and instrumentation diagram (FEP) graphical editor. Intent of this program is to perform a V&V of successive versions of SAPHIRE. Previous efforts have been the V&V of SAPHIRE Version 4.0. The SAPHIRE 5.0 V&V plan is based on the SAPHIRE 4.0 V&V plan with revisions to incorporate lessons learned from the previous effort. Also, the SAPHIRE 5.0 vital and nonvital test procedures are based on the test procedures from SAPHIRE 4.0 with revisions to include the new SAPHIRE 5.0 features as well as to incorporate lessons learned from the previous effort. Most results from the testing were acceptable; however, some discrepancies between expected code operation and actual code operation were identified. Modifications made to SAPHIRE are identified.
Institute of Scientific and Technical Information of China (English)
唐金玉; 王岩; 戴杨鑫; 李由明
2014-01-01
the enclosures with integrated culture of freshwater pearl mussel Hyriopsis cumingii and fishes. Four treatments, including stocking of grass carp, gibel carp, silver carp and bighead carp with formulated feed supplement (GISB-F ), stocking of grass carp, gibel carp, silver carp and bighead carp without formulated feed supplement (GISB-NF), stocking of silver carp and bighead carp with formulated feed supplement (SB-F), stocking of silver carp and bighead carp without formulated feed supplement (SB-NF), were examined. In each enclosure, 20 mussel, 15 grass carp, 5 gibel carp, 5 silver carp and 5 big-head carp were stocked, respectively. Results showed that the phytoplankton biomass ranged from 3.7 × 108 to 6.0 × 108 cell·L-1 during the experiment. No significant differences were found in the species composition, biomass and biodiver-sity index of phytoplankton, dominance index of the dominant species, and the ratio of cyanobacteria biomass to phy-toplankton biomass between enclosures GISB-F, GISB-NF, SB-F and SB-NF. However, the concentration of chloro-phyll a was higher in the enclosures fed formulated feed than in the enclosures without formulated feed supplement. Seasonal dynamics in phytoplankton community was observed. The dominant species of phytoplankton was green algae (Crucigenia and Scenedesmus) at the beginning of the experiment, and changed to blue-green algae (Merismopedia and Microcyslis) at the end of the experiment, suggesting the trend of occurrence of blue-green algae bloom. The factors that significantly influenced the alteration of community structure of phytoplankton included water temperature (T), ammonia (NH3-N), total nitrogen (TN) and chemical oxygen demand (CODMn). This result indicated that the changes of co-cultured species combination and formulated feed supplement could not change the trend that blue-green algal bloom finally occurred in the enclosures since NH3-N, TN and CODMn increased with the progress of the experiment.
Stable and flux-conserved meshfree formulation to model shocks
Roth, Michael J.; Chen, Jiun-Shyan; Slawson, Thomas R.; Danielson, Kent T.
2016-05-01
Accurate shock modeling requires that two critical issues be addressed: (1) correct representation of the essential shock physics, and (2) control of Gibbs phenomenon oscillation at the discontinuity. In this work a stable (oscillation limiting) and flux-conserved formulation under the reproducing kernel particle method is developed for shock modeling. A smoothed flux divergence is constructed under the framework of stabilized conforming nodal integration, which is locally-enriched with a Riemann solution to satisfy the entropy production constraints. This Riemann-enriched flux divergence is embedded into the reproducing kernel formulation through a velocity correction that also provides oscillation control at the shock. The correction is constrained to the shock region by an automatic shock detection algorithm that is constructed using the intrinsic spectral decomposition feature of the reproducing kernel approximation. Several numerical examples are provided to verify accuracy of the proposed formulation.
3N Scattering in a Three-Dimensional Operator Formulation
Glöckle, W; Elster, Ch; Golak, J; Skibinski, R; Witala, H
2009-01-01
A recently developed formulation for a direct treatment of the equations for two- and three-nucleon bound states as set of coupled equations of scalar functions depending only on vector momenta is extended to three-nucleon scattering. Starting from the spin-momentum dependence occurring as scalar products in two- and three-nucleon forces together with other scalar functions, we present the Faddeev multiple scattering series in which order by order the spin-degrees can be treated analytically leading to 3D integrations over scalar functions depending on momentum vectors only. Such formulation is especially important in view of awaiting extension of 3N Faddeev calculations to projectile energies above the pion production threshold and applications of chiral perturbation theory 3N forces, which are to be most efficiently treated directly in such three-dimensional formulation without having to expand these forces into a partial wave basis.
Schwinger Boson Formulation and Solution of the Crow-Kimura and Eigen Models of Quasispecies Theory
Park, Jeong-Man; Deem, Michael W.
2006-11-01
We express the Crow-Kimura and Eigen models of quasispecies theory in a functional integral representation. We formulate the spin coherent state functional integrals using the Schwinger Boson method. In this formulation, we are able to deduce the long-time behavior of these models for arbitrary replication and degradation functions. We discuss the phase transitions that occur in these models as a function of mutation rate. We derive for these models the leading order corrections to the infinite genome length limit.
Colucci, R. R.; Forte, E.; Boccali, C.; Dossi, M.; Lanza, L.; Pipan, M.; Guglielmin, M.
2015-03-01
We propose an integrated methodology to image the internal structure, evaluate the volume and estimate the densities of different units within ice bodies, useful for more precise mass estimation of very small glaciers. The procedure encompasses light detection and ranging (LiDAR) and ground penetrating radar (GPR) common offset data. The case study is the Canin Eastern Glacieret (CEG), a very small and maritime glacier in the Eastern Alps, and one of the lowermost glaciers of the European Alps. We calculate both volumetric and mass variations of the analysed ice body by integrating GPR measurements with LiDAR surveys acquired in different years (2006 and 2011). Between 2006 and 2011, the area of the glacieret increased from 8,510 to 17,530 m2 with a gain of 9,016 m2. The observed volume increase has been estimated in 96,350 m3 (+97 %), which corresponds to a positive mass balance of 3.89 m w.e.. This quite unusual finding in the present global warming behaviour is mainly due to the above-average winter accumulation (cw) in the considered period. Moreover, the winter season 2008-2009 represented an exceptional event with a cw equal to 13.38 m, the highest of the available record. Thanks to density estimation, we infer the total mass of the CEG at the time of the geophysical surveys, comparing such results with the ones obtained with available empirical equations, observing an important mass gain in the 5 years considered.
DEFF Research Database (Denmark)
Quaglia, Alberto; Sarup, Bent; Sin, Gürkan;
2013-01-01
The formulation of Enterprise-Wide Optimization (EWO) problems as mixed integer nonlinear programming requires collecting, consolidating and systematizing large amount of data, coming from different sources and specific to different disciplines. In this manuscript, a generic and flexible data...... structure for efficient formulation of enterprise-wide optimization problems is presented. Through the integration of the described data structure in our synthesis and design framework, the problem formulation workflow is automated in a software tool, reducing time and resources needed to formulate large...... problems, while ensuring at the same time data consistency and quality at the application stage....
An exact approach for aggregated formulations
DEFF Research Database (Denmark)
Gamst, Mette; Spoorendonk, Simon
cause an infeasible solution. In this paper, we consider (mixed) integer program formulations and propose a method for ensuring an optimal solution to the original (disaggregated) problem using an aggregated formulation. The method is based on Benders’ decomposition on a combination of the disaggregated...... mathematical formulation and the aggregated formulation. The method allows usage of relaxed aggregated formulations and enables branching on both aggregated and disaggregated variables. Also, the method guarantees an LP bound at least as good as those for the disaggregated and aggregated formulations...
On multiple M2-brane model(s and its N=8 Superspace Formulation(s
Directory of Open Access Journals (Sweden)
I. A. Bandos
2010-01-01
Full Text Available We give a brief review of Bagger-Lambert-Gustavsson (BLG model, with emphasis on its version invariant under the volume preserving diffeomorphisms (SDiff3 symmetry. We describe the on-shell superfield formulation of this SDiff3 BLG model in standard N = 8, d = 3 superspace, as well as its superfield action in the pure spinor N = 8 superspace. We also briefly address the Aharony-Bergman-Jafferis-Maldacena (ABJM/ABJ model invariant under SU(Mk × SU(N−k gauge symmetry, and discuss the possible form of their N = 6 and, for the case of Chern-Simons level k = 1, 2, N = 8 superfield equations.
Energy Technology Data Exchange (ETDEWEB)
Soderberg, W.E.; O' Gara, J.C.; Reid, R.A.; Lewis, R.; Ervasti, M.; Pearce, J.
1977-06-01
The University of Minnesota and its partners - St. Mary's and Fairview hospitals, Augsburg College, Northern States Power Company, and possibly some small add-on customers - will develop the feasibility of a Grid-Connected Integrated Community Energy System utilizing cogeneration of electricity as a byproduct of steam in an educational, residential, hospital, and commercial community. An overview of the site is given. The geographical location, spatial data topographical data, and modes of transportation to and from the site are given. Environmental data (geology, surficial geology, regional watershed, trees, building shadows, climatological data, environmental quality data, and the microclimate) are discussed. The open space, outdoor use, and wildlife habitat are assessed. Information on the building sectors includes sector energy density, night time usage, building construction, steam adsorption air conditioning, electric air conditioning, and University Hospital air conditioning. The building sector energy profiles and the special service sectors are described. (MCW)
Energy Technology Data Exchange (ETDEWEB)
Lowrie, J.W.; Fermelia, A.J.; Haley, D.C.; Gremban, K.D.; Vanbaalen, J.
1982-09-01
Documentation of the preliminary software developed as a framework for a generalized integrated robotic system simulation is presented. The program structure is composed of three major functions controlled by a program executive. The three major functions are: system definition, analysis tools, and post processing. The system definition function handles user input of system parameters and definition of the manipulator configuration. The analysis tools function handles the computational requirements of the program. The post processing function allows for more detailed study of the results of analysis tool function executions. Also documented is the manipulator joint model software to be used as the basis of the manipulator simulation which will be part of the analysis tools capability.
Energy Technology Data Exchange (ETDEWEB)
Gray, D.; Tomlinson, G.C. (Mitre Corp., McLean, VA (USA). Civil Systems Div.)
1990-10-01
This report documents the development of an integrated indirect liquefaction system model, which processes input coal to refined liquid products, and the model's application in the analysis of a baseline case. The baseline case uses Shell gasification of coal followed by gas cleaning to produce a clean synthesis gas for slurry-phase Fischer-Tropsch synthesis. The raw liquid products are refined to produce gasoline and diesel. Costs of liquid products have been estimated for the baseline plant. The model also alloys many sensitivity studies to be performed so that the economic impacts of research and development advances can be quantified. When used in this manner, the model can provide research guidance for future indirect liquefaction studies. 18 refs., 12 figs., 12 tabs.
1976-01-01
The applicability of energy storage devices to any energy system depends on the performance and cost characteristics of the larger basic system. A comparative assessment of energy storage alternatives for application to IUS which addresses the systems aspects of the overall installation is described. Factors considered include: (1) descriptions of the two no-storage IUS baselines utilized as yardsticks for comparison throughout the study; (2) discussions of the assessment criteria and the selection framework employed; (3) a summary of the rationale utilized in selecting water storage as the primary energy storage candidate for near term application to IUS; (4) discussion of the integration aspects of water storage systems; and (5) an assessment of IUS with water storage in alternative climates.
Energy Technology Data Exchange (ETDEWEB)
Wells, J.E.; Lappa, D.A.; Bernreuter, D.L.; Chen, J.C.; Chuang, T.Y. [Lawrence Livermore National Lab., CA (United States); Johnson, J.J.; Campbell, R.D.; Hashimoto, P.S.; Maslenikov, O.R.; Tiong, L.W.; Ravindra, M.K.; Kincaid, R.H. [EQE, International, Irvine, CA (United States); Sues, R.H.; Putcha, C.S. [NTS Engineering, Long Beach, CA (United States)
1993-11-01
This report describes the methodology used and the results obtained from the application of a simplified seismic risk methodology to the LaSalle County Nuclear Generating Station Unit 2. This study is part of the Level I analysis being performed by the Risk Methods Integration and Evaluation Program (RMIEP). Using the RMIEP developed event and fault trees, the analysis resulted in a seismically induced core damage frequency point estimate of 6.OE-7/yr. This result, combined with the component importance analysis, indicated that system failures were dominated by random events. The dominant components included diesel generator failures (failure to swing, failure to start, failure to run after started), and condensate storage tank.
Measurement and analysis of grain boundary grooving by volume diffusion
Hardy, S. C.; Mcfadden, G. B.; Coriell, S. R.; Voorhees, P. W.; Sekerka, R. F.
1991-01-01
Experimental measurements of isothermal grain boundary grooving by volume diffusion are carried out for Sn bicrystals in the Sn-Pb system near the eutectic temperature. The dimensions of the groove increase with a temporal exponent of 1/3, and measurement of the associated rate constant allows the determination of the product of the liquid diffusion coefficient D and the capillarity length Gamma associated with the interfacial free energy of the crystal-melt interface. The small-slope theory of Mullins is generalized to the entire range of dihedral angles by using a boundary integral formulation of the associated free boundary problem, and excellent agreement with experimental groove shapes is obtained. By using the diffusivity measured by Jordon and Hunt, the present measured values of Gamma are found to agree to within 5 percent with the values obtained from experiments by Gunduz and Hunt on grain boundary grooving in a temperature gradient.
A robust and accurate formulation of molecular and colloidal electrostatics
Sun, Qiang; Klaseboer, Evert; Chan, Derek Y. C.
2016-08-01
This paper presents a re-formulation of the boundary integral method for the Debye-Hückel model of molecular and colloidal electrostatics that removes the mathematical singularities that have to date been accepted as an intrinsic part of the conventional boundary integral equation method. The essence of the present boundary regularized integral equation formulation consists of subtracting a known solution from the conventional boundary integral method in such a way as to cancel out the singularities associated with the Green's function. This approach better reflects the non-singular physical behavior of the systems on boundaries with the benefits of the following: (i) the surface integrals can be evaluated accurately using quadrature without any need to devise special numerical integration procedures, (ii) being able to use quadratic or spline function surface elements to represent the surface more accurately and the variation of the functions within each element is represented to a consistent level of precision by appropriate interpolation functions, (iii) being able to calculate electric fields, even at boundaries, accurately and directly from the potential without having to solve hypersingular integral equations and this imparts high precision in calculating the Maxwell stress tensor and consequently, intermolecular or colloidal forces, (iv) a reliable way to handle geometric configurations in which different parts of the boundary can be very close together without being affected by numerical instabilities, therefore potentials, fields, and forces between surfaces can be found accurately at surface separations down to near contact, and (v) having the simplicity of a formulation that does not require complex algorithms to handle singularities will result in significant savings in coding effort and in the reduction of opportunities for coding errors. These advantages are illustrated using examples drawn from molecular and colloidal electrostatics.
A 3-D Finite-Volume Non-hydrostatic Icosahedral Model (NIM)
Lee, Jin
2014-05-01
The Nonhydrostatic Icosahedral Model (NIM) formulates the latest numerical innovation of the three-dimensional finite-volume control volume on the quasi-uniform icosahedral grid suitable for ultra-high resolution simulations. NIM's modeling goal is to improve numerical accuracy for weather and climate simulations as well as to utilize the state-of-art computing architecture such as massive parallel CPUs and GPUs to deliver routine high-resolution forecasts in timely manner. NIM dynamic corel innovations include: * A local coordinate system remapped spherical surface to plane for numerical accuracy (Lee and MacDonald, 2009), * Grid points in a table-driven horizontal loop that allow any horizontal point sequence (A.E. MacDonald, et al., 2010), * Flux-Corrected Transport formulated on finite-volume operators to maintain conservative positive definite transport (J.-L, Lee, ET. Al., 2010), *Icosahedral grid optimization (Wang and Lee, 2011), * All differentials evaluated as three-dimensional finite-volume integrals around the control volume. The three-dimensional finite-volume solver in NIM is designed to improve pressure gradient calculation and orographic precipitation over complex terrain. NIM dynamical core has been successfully verified with various non-hydrostatic benchmark test cases such as internal gravity wave, and mountain waves in Dynamical Cores Model Inter-comparisons Projects (DCMIP). Physical parameterizations suitable for NWP are incorporated into NIM dynamical core and successfully tested with multimonth aqua-planet simulations. Recently, NIM has started real data simulations using GFS initial conditions. Results from the idealized tests as well as real-data simulations will be shown in the conference.
Boundary-volume integral equation numerical modeling for complex near surface%复杂地表边界元-体积元波动方程数值模拟
Institute of Scientific and Technical Information of China (English)
管西竹; 符力耘; 陶毅; 于更新
2011-01-01
复杂近地表引起来自深部构造的地震反射信号振幅和相位的异常变化,是影响复杂近地表地区地震资料品质的主要原因.本文采用边界元-体积元方法,通过求解含复杂地表的波动积分方程,来模拟地震波在复杂近地表构造中的传播.其中,边界元法模拟地形起伏和表层地质结构对地震波传播的影响；体积元法模拟起伏地表下非均质低降速层的影响.与其他数值模拟方法比较,其主要优点为几何上精确描述不规则地表界面,实现精确模拟自由表面对地震波的边界散射；显式应用近地表地层界面的连续边界条件,实现半解析的数值模拟；分区处理近地表复杂结构,有效模拟复杂地表下非均匀介质对地震波场的体散射.数值试验结果表明了该方法的实用性和有效性.%Complex near surface causes the anomalous variation of the amplitude and phase of seismic reflection signal from deep structures, and it is the most important factor to degrade the quality of seismic data. In this paper, we use the boundary-volume integral equation technique to simulate the seismic wave propagation in the complex near surface structure by solving the wave propagation equation with complex near surface condition. In the boundary-volume integral equation technique, the boundary element method can simulate irregular surface and geological structure for seismic wave propagation, and the volume element method can simulate the effect of the heterogeneous medium in low subweathered zone for the seismic wave propagation. Compared with other numerical simulation methods, the main advantage of the boundary-volume integral equation technique is its accurate geometric description of irregular surface and interface to simulate the boundary scattering waves by the free surface; it explicitly applies the continuous boundary conditions of the complex near surface to implement the semi-analytical numerical simulation; it
Path integral for inflationary perturbations
Prokopec, T.; Rigopoulos, G.
2010-01-01
The quantum theory of cosmological perturbations in single-field inflation is formulated in terms of a path integral. Starting from a canonical formulation, we show how the free propagators can be obtained from the well-known gauge-invariant quadratic action for scalar and tensor perturbations, and
Energy Technology Data Exchange (ETDEWEB)
Myrzik, J. [Kassel Univ. (Gesamthochschule) (Germany); Krieger, T.; Zacharias, P. [Institut fuer Solare Energieversorgungstechnik (ISET), Kassel (Germany); Nijs, J.; Mey, B. de [IMEC, Leuven (Belgium); O`Mathuna, S.; Meinhardt, M. [NMRC, Cork (Ireland); Held, E. de; Jantsch, M. [ECN, Petten (Netherlands); Hofkens, H. [SOLTECH, Leuven (Belgium)
1998-12-01
In the context of a project supported by the EU, a miniaturised PV inverter integrated in a module is being developed as a laboratory sample. The main aim of this project is the provision of know-how for the industry. In order to provide aids to decision-making for industrial manufacture, different lines of development are being worked out for this purpose. The systematic listing and judging of different inverter topologies has proved successful in the development of a string inverter. To determine a suitable inverter topology, a systematic procedure is shown in this article, which was carried out with the aid of different circuit calculations. [Deutsch] Im Rahmen eines von der EU gefoerderten Projektes wird ein modulintegrierter, miniaturisierter PV-Wechselrichter als Labormuster entwickelt. Uebergeordnetes Ziel dieses Projektes ist die Bereitstellung von Know-how fuer die Industrie. Hierzu werden verschiedene Entwicklungslinien erarbeitet, um Entscheidungshilfen fuer die industrielle Fertigung bereit zu stellen. Bereits bei der Entwicklung eines Stringwechselrichters hat sich die systematische Aufstellung und Beurteilung verschiedener Wechselrichtertopologien bewaehrt. Zur Ermittlung einer geeigneten Wechselrichtertopologie wird in diesem Beitrag eine systematische Vorgehensweise aufgezeigt, die mit der Hilfe verschiedener Schaltungskalkulationen durchgefuehrt wurde. (orig.)
Perfume formulation: words and chats.
Ellena, Céline
2008-06-01
What does it mean to create fragrances with materials from chemistry and/or from nature? How are they used to display their characteristic differences, their own personality? Is it easier to create with synthetic raw materials or with essential oils? This review explains why a perfume formulation corresponds in fact to a conversation, an interplay between synthetic and natural perfumery materials. A synthetic raw material carries a single information, and usually is very linear. Its smell is uniform, clear, and faithful. Natural raw materials, on the contrary, provide a strong, complex and generous image. While a synthetic material can be seen as a single word, a natural one such as rose oil could be compared to chatting: cold, warm, sticky, heavy, transparent, pepper, green, metallic, smooth, watery, fruity... full of information. Yet, if a very small amount of the natural material is used, nothing happens, the fragrance will not change. However, if a large amount is used, the rose oil will swallow up everything else. The fragrance will smell of nothing else except rose! To formulate a perfume is not to create a culinary recipe, with only dosing the ingredients in well-balanced amounts. To formulate rather means to flexibly knit materials together with a lively stitch, meeting or repelling each other, building a pleasant form, which is neither fixed, nor solid, nor rigid. A fragrance has an overall structure, which ranges from a clear sound, made up of stable, unique, and linear items, to a background chat, comfortable and reassuring. But that does, of course, not mean that there is only one way of creating a fragrance!
A Geometric Formulation of Supersymmetry
Freedman, Daniel Z; Van Proeyen, Antoine
2016-01-01
The scalar fields of supersymmetric models are coordinates of a geometric space. We propose a formulation of supersymmetry that is covariant with respect to reparametrizations of this target space. Employing chiral multiplets as an example, we introduce modified supersymmetry variations and redefined auxiliary fields that transform covariantly under reparametrizations. The resulting action and transformation laws are manifestly covariant and highlight the geometric structure of the supersymmetric theory. The covariant methods are developed first for general theories (not necessarily supersymmetric) whose scalar fields are coordinates of a Riemannian target space.
BRST formulation of 4-monopoles
Gianvittorio, R; Restuccia, A
1996-01-01
A supersymmetric gauge invariant action is constructed over any 4-dimensional Riemannian manifold describing Witten's theory of 4-monopoles. The topological supersymmetric algebra closes off-shell. The multiplets include the auxiliary fields and the Wess-Zumino fields in an unusual way, arising naturally from BRST gauge fixing. A new canonical approach over Riemann manifolds is followed, using a Morse function as an euclidean time and taking into account the BRST boundary conditions that come from the BFV formulation. This allows a construction of the effective action starting from gauge principles.
Formulation of soy oil products
Directory of Open Access Journals (Sweden)
Woerfel, John B.
1995-12-01
Full Text Available The paper comments different formulations of soy oil products such as salad and cooking oils, margarine, shortenings, commercial shortenings, frying shortenings, and fluid shortenings. Hydrogenation and its influence on final products is also included.
El trabajo presenta diferentes formulaciones a base de aceite de soja tales como aceites para ensalada y cocinado, margarina, grasas sólidas (shortenings, grasas sólidas comerciales, grasas sólidas para frituras y grasas fluidas. Hace también referencia al proceso de hidrogenación y a sus efectos en los productos finales.
Spreading of a Lidocaine Formulation on Microneedle-Treated Skin.
Nayak, Atul; Das, Diganta B; Chao, Tzu C; Starov, Victor M
2015-12-01
The spreadability of a liquid drug formulation on skin is an indication of it either remaining stationary or distributing (spreading) as a droplet. Factors determining droplet spreadability of the formulation are spreading area, diameter of the droplet base, viscosity of the liquid, contact angle, volume of droplet on skin and any others. The creation of microcavities from the application of microneedle (MN) has the potential to control droplet spreading, and hence, target specific areas of skin for drug delivery. However, there is little work that demonstrates spreading of liquid drug formulation on MN-treated skin. Below, spreading of a lidocaine hydrogel formulation and lidocaine solution (reference liquid) on porcine skin is investigated over MN-treated skin. Controlled spreadability was achieved with the lidocaine hydrogel on MN-treated skin as compared with lidocaine solution. It was observed that the droplet spreading parameters such as spreading radius, droplet height and dynamic contact angle were slightly lower for the lidocaine hydrogel than the lidocaine solution on skin. Also, the lidocaine hydrogel on MN-treated skin resulted in slower dynamic reduction of droplet height, contact angle and reduced time taken in attaining static advancing droplets because of the MN microcavities.
Necessity of rethinking oral pediatric formulations
DEFF Research Database (Denmark)
Bar-Shalom, Daniel
2014-01-01
This commentary reviews the difficulties in formulating oral products for children. The significance of the fragmentation of the pediatric population in terms of development and ability to ingest different dosage formulations is examined. It is postulated that a flexible formulation, acceptable...
Formulation, Preparation, and Characterization of Polyurethane Foams
Pinto, Moises L.
2010-01-01
Preparation of laboratory-scale polyurethane foams is described with formulations that are easy to implement in experiments for undergraduate students. Particular attention is given to formulation aspects that are based on the main chemical reactions occurring in polyurethane production. This allows students to develop alternative formulations to…
Formulation, Preparation, and Characterization of Polyurethane Foams
Pinto, Moises L.
2010-01-01
Preparation of laboratory-scale polyurethane foams is described with formulations that are easy to implement in experiments for undergraduate students. Particular attention is given to formulation aspects that are based on the main chemical reactions occurring in polyurethane production. This allows students to develop alternative formulations to…
Supporting Cooking Tasks by a Smart Formulation Table
Maass, Wolfgang; Filler, Andreas
2010-01-01
Kitchen environments are target of many Ubiquitous Computing prototypes that investigate the application of technologies in real-world situations. In this paper, we present a design-driven approach that carefully analyzes domain theories, identifies requirements for human task support, derives services accordingly, and uses these descriptions for guiding implementations. We focus on how preparation and concocting tasks can be supported by a formulation table with integrated scaling mechanism ...
A Simple Analytical Formulation for Periodic Orbits in Binary Stars
Nagel, Erick
2007-01-01
An analytical approximation to periodic orbits in the circular restricted three-body problem is provided. The formulation given in this work is based in calculations known from classical mechanics, but with the addition of the necessary terms to give a fairly good approximation that we compare with simulations, resulting in a simple set of analytical expressions that solve periodic orbits on discs of binary systems without the need of solving the motion equations by numerical integrations.
Integrating narrow therapeutic index drug formulations in transplantation
A. Johnston (Andrew); L. Schick (Liz); T. van Gelder (Teun)
2012-01-01
textabstractThere is considerable debate regarding generic drug substitution in solid organ transplant recipients, and various European transplant associations and societies have expressed caution about the potential adverse consequences from uncontrolled switching between the different narrow
On a unified formulation of completely integrable systems
Tudoran, Răzvan M
2011-01-01
The purpose of this article is to show that a $\\mathcal{C}^1$ differential system on $\\R^n$ which admits a set of $n-1$ independent $\\mathcal{C}^2$ conservation laws defined on an open subset $\\Omega\\subseteq \\R^n$, is essentially $\\mathcal{C}^1$ equivalent on an open and dense subset of $\\Omega$, with the linear differential system $u^\\prime_1=u_1, \\ u^\\prime_2=u_2,..., \\ u^\\prime_n=u_n$. The main results are illustrated in the case of two concrete dynamical systems, namely the three dimensional Lotka-Volterra system, and respectively the Euler equations from the free rigid body dynamics.
Sauer, Roger A; Corbett, Callum J
2012-01-01
A geometrically exact membrane formulation is presented that is based on curvilinear coordinates and isogeometric finite elements, and is suitable for both solid and liquid membranes. The curvilinear coordinate system is used to describe both the theory and the finite element equations of the membrane. In the latter case this avoids the use of local cartesian coordinates at the element level. Consequently, no transformation of derivatives is required. The formulation considers a split of the in-plane and out-of-plane membrane contributions, which allows the construction of a stable formulation for liquid membranes with constant surface tension. The proposed membrane formulation is general, and accounts for dead and live loading, as well as enclosed volume, area, and contact constraints. The new formulation is illustrated by several challenging examples, considering linear and quadratic Lagrange elements, as well as isogeometric elements based on quadratic NURBS and cubic T-splines. It is seen that the isogeom...
Energy Technology Data Exchange (ETDEWEB)
Balik, S [Cleveland Clinic Foundation, Cleveland, OH (United States); Weiss, E; Sleeman, W; Wu, Y; Hugo, G [Virginia Commonwealth University, Richmond, VA (United States); Dogan, N [University of Miami, Miami, FL (United States); Fatyga, M [Mayo Clinic, AZ, Phoenix, AZ (United States)
2014-06-15
Purpose: To evaluate the potential impact of several setup error correction strategies on a proposed image-guided adaptive radiotherapy strategy for locally advanced lung cancer. Methods: Daily 4D cone-beam CT and weekly 4D fan-beam CT images were acquired from 9 lung cancer patients undergoing concurrent chemoradiation therapy. Initial planning CT was deformably registered to daily CBCT images to generate synthetic treatment courses. An adaptive radiation therapy course was simulated using the weekly CT images with replanning twice and a hypofractionated, simultaneous integrated boost to a total dose of 66 Gy to the original PTV and either a 66 Gy (no boost) or 82 Gy (boost) dose to the boost PTV (ITV + 3mm) in 33 fractions with IMRT or VMAT. Lymph nodes (LN) were not boosted (prescribed to 66 Gy in both plans). Synthetic images were rigidly, bony (BN) or tumor and carina (TC), registered to the corresponding plan CT, dose was computed on these from adaptive replans (PLAN) and deformably accumulated back to the original planning CT. Cumulative D98% of CTV of PT (ITV for 82Gy) and LN, and normal tissue dose changes were analyzed. Results: Two patients were removed from the study due to large registration errors. For the remaining 7 patients, D98% for CTV-PT (ITV-PT for 82 Gy) and CTV-LN was within 1 Gy of PLAN for both 66 Gy and 82 Gy plans with both setup techniques. Overall, TC based setup provided better results, especially for LN coverage (p = 0.1 for 66Gy plan and p = 0.2 for 82 Gy plan, comparison of BN and TC), though not significant. Normal tissue dose constraints violated for some patients if constraint was barely achieved in PLAN. Conclusion: The hypofractionated adaptive strategy appears to be deliverable with soft tissue alignment for the evaluated margins and planning parameters. Research was supported by NIH P01CA116602.
Scattering theory with path integrals
Energy Technology Data Exchange (ETDEWEB)
Rosenfelder, R. [Particle Theory Group, Paul Scherrer Institute, CH-5232 Villigen PSI (Switzerland)
2014-03-15
Starting from well-known expressions for the T-matrix and its derivative in standard nonrelativistic potential scattering, I rederive recent path-integral formulations due to Efimov and Barbashov et al. Some new relations follow immediately.
Scattering Theory with Path Integrals
Rosenfelder, R
2013-01-01
Starting from well-known expressions for the $T$-matrix and its derivative in standard nonrelativistic potential scattering I rederive recent path-integral formulations due to Efimov and Barbashov et al. Some new relations follow immediately.
Development of enteric submicron particle formulation of papain for oral delivery
Directory of Open Access Journals (Sweden)
Sharma M
2011-09-01
Full Text Available Manu Sharma1, Vinay Sharma2, Amulya K Panda3, Dipak K Majumdar41Department of Pharmacy, Banasthali Vidhyapith, Banasthali, India; 2Department of Bioscience and Biotechnology, Banasthali Vidhyapith, Banasthali, India; 3National Institute of Immunology, Aruna Asaf Ali Marg, New Delhi, India; 4Department of Pharmaceutics, Delhi Institute of Pharmaceutical Sciences and Research, University of Delhi, New Delhi, IndiaBackground: Particulate systems have received increasing attention for oral delivery of biomolecules. The objective of the present study was to prepare submicron particulate formulations of papain for pH-dependent site-specific release using pH-sensitive polymers.Methods: Enteric submicron particle formulations of papain were prepared by w/o/w emulsion solvent evaporation using hydroxypropyl methylcellulose phthalate (HPMCP, Eudragit L100, and Eudragit S100, to avoid gastric inactivation of papain.Results: Smaller internal and external aqueous phase volumes provided maximum encapsulation efficiency (75.58%–82.35%, the smallest particle size (665.6–692.4 nm, and 25%–30% loss of enzyme activity. Release studies in 0.1 N HCl confirmed the gastroresistance of the formulations. The anionic submicron particles aggregated in 0.1 N HCl (ie, gastric pH 1.2 due to protonation of carboxylic groups in the enteric polymer. Aggregates < 500 µm size would not impede gastric emptying. However, at pH > 5.0 (duodenal pH, the submicron particles showed deaggregation due to restoration of surface charge. HPMCP submicron particles facilitated almost complete release of papain within 30 minutes at pH 6.0, while Eudragit L100 and Eudragit S100 particles released 88.82% and 53.00% of papain at pH 6.8 and pH 7.4, respectively, according to the Korsmeyer–Peppas equation. Sodium dodecyl sulfate polyacrylamide gel electrophoresis and fluorescence spectroscopy confirmed that the structural integrity of the enzyme was maintained during encapsulation. Fourier
Formulation and evaluation of topical herbal gel for the treatment of arthritis in animal model
Directory of Open Access Journals (Sweden)
Rajasekaran Aiyalu
Full Text Available ABSTRACT The objective of the study is to formulate and evaluate a topical herbal gel containing Cardiospermum halicacabum and Vitex negundo leaf extracts for their anti-arthritic activity in rats. Twelve herbal gel formulations were prepared using 1.5% of gelling agents carbopol 934 (F1-F6 and carbopol 940 (F6-F12 and they were evaluated for physical appearance, net content, viscosity, extrudability, pH, spreadability, in vitro diffusion profile and primary skin irritation tests. The stability study for the topical herbal gel formulation was done as per ICH guidelines and anti-arthritic activity was evaluated by Freund's Complete Adjuvant (FCA induced arthritis method. Assessment of body weight, paw volume, hematological and biochemical parameters, histopathological examination and In vitro determination of serum biomarkers were also carried out. Formulated gels were homogenous, stable and complied with the guidelines. Among the formulations, F4 showed better release (98.4 % characteristics than other formulations. No erythema or edema was observed in the skin irritation test confirming the gel was non-toxic and safe. Topical application of the herbal gel F4 containing carbopol 934 displayed significant (p < 0.001 anti-arthritic activity compared to diseased rats. Reduction in paw volume, no agglutination in C - reactive protein and rheumatic factor, reduction in TNF level, regaining of normal hematological, and biochemical parameters, reduction in spleen and thymus weight and histopathological examination supported the anti-arthritic activity of the gel formulation.
EMPIRICAL MODEL FOR FORMULATION OF CRYSTAL-TOLERANT HLW GLASSES
Energy Technology Data Exchange (ETDEWEB)
KRUGER AA; MATYAS J; HUCKLEBERRY AR; VIENNA JD; RODRIGUEZ CA
2012-03-07
Historically, high-level waste (HLW) glasses have been formulated with a low liquideus temperature (T{sub L}), or temperature at which the equilibrium fraction of spinel crystals in the melt is below 1 vol % (T{sub 0.01}), nominally below 1050 C. These constraints cannot prevent the accumulation of large spinel crystals in considerably cooler regions ({approx} 850 C) of the glass discharge riser during melter idling and significantly limit the waste loading, which is reflected in a high volume of waste glass, and would result in high capital, production, and disposal costs. A developed empirical model predicts crystal accumulation in the riser of the melter as a function of concentration of spinel-forming components in glass, and thereby provides guidance in formulating crystal-tolerant glasses that would allow high waste loadings by keeping the spinel crystals small and therefore suspended in the glass.
Directory of Open Access Journals (Sweden)
Ashwini Rajendra
2012-02-01
Full Text Available Recent years there has been greater utilization of natural polymers in the development of delivery systems. The present work is an effort towards development of matrix tablets using polyelectrolyte complex formed between the oppositely charged natural polymers like okra mucilage obtained from pods of Abelmoschus esculentus and chitosan. The effect of pH and polymer volume ratio on yield of polyelectrolyte complex was studied. It was observed that the yield was maximum (96.45% at pH 5 and at polymer volume ratio of 9:1 between okra mucilage and chitosan. The prepared polyelectrolyte complex was also characterised by conductimetry, FTIR, DSC. The results confirmed the formation of polyelectrolyte complex between the natural polymers. The matrix tablets were formulated for model drug diclofenac sodium using the best polyelectrolyte complex at different drug to polymer ratios and compared with formulations containing individual polymers as well as marketed formulation. The prepared formulations showed satisfactory physical parameters. Formulations F2 and F3 extended the drug release for more than 8 h with (83.87± 0.8321% and (77.125± 0.125% drug release respectively in 8 h. The formulations F2 and F3 followed zero order kinetics with anomalous diffusion mechanism. The mean dissolution times were 3.6042 and 3.5935 hrs and the % dissolution efficiency were 54.9467 and 55.7203 % for formulations F2 and F3 respectively. The similarity factor f2 for formulation F2 was 61.6751 and for formulation F3, it was found to be 60.5025.The formulations were found to be stable.
Zellweger, Andres; Resnick, Herbert; Stevens, Edward; Arkind, Kenneth; Cotton William B.
2010-01-01
Raytheon, in partnership with NASA, is leading the way in ensuring that the future air transportation continues to be a key driver of economic growth and stability and that this system provides an environmentally friendly, safe, and effective means of moving people and goods. A Raytheon-led team of industry and academic experts, under NASA contract NNA08BA47C, looked at the potential issues and impact of introducing four new classes of advanced aircraft into the next generation air transportation system -- known as NextGen. The study will help determine where NASA should further invest in research to support the safe introduction of these new air vehicles. Small uncrewed or unmanned aerial systems (SUAS), super heavy transports (SHT) including hybrid wing body versions (HWB), very light jets (VLJ), and supersonic business jets (SSBJ) are the four classes of aircraft that we studied. Understanding each vehicle's business purpose and strategy is critical to assessing the feasibility of new aircraft operations and their impact on NextGen's architecture. The Raytheon team used scenarios created by aviation experts that depict vehicles in year 2025 operations along with scripts or use cases to understand the issues presented by these new types of vehicles. The information was then mapped into the Joint Planning and Development Office's (JPDO s) Enterprise Architecture to show how the vehicles will fit into NextGen's Concept of Operations. The team also identified significant changes to the JPDO's Integrated Work Plan (IWP) to optimize the NextGen vision for these vehicles. Using a proven enterprise architecture approach and the JPDO s Joint Planning Environment (JPE) web site helped make the leap from architecture to planning efficient, manageable and achievable. Very Light Jets flying into busy hub airports -- Supersonic Business Jets needing to climb and descend rapidly to achieve the necessary altitude Super-heavy cargo planes requiring the shortest common flight
Formulation Patents and Dermatology and Obviousness
Directory of Open Access Journals (Sweden)
Josephine Liu
2011-11-01
Full Text Available Most patents covering dermatologic products contain patent claims directed to the pharmaceutical formulation of the product. Such patents, known as formulation patents, are vulnerable to attacks based on the legal argument that the formulations covered are obvious over formulations already known prior to the filing of the patent application. Because obviousness is an important concept in patent law, recent court cases concerning obviousness and formulation patents were examined and discussed below. Courts have ruled that patent claims are obvious when features of the claimed formulation are found in the prior art, even if the features or characteristics of the formulation are not explicitly disclosed in the prior art. However, patentees have successfully overcome obviousness challenges where there were unexpected results or properties and/or the prior art taught away from the claimed invention.
Liquid Secondary Waste Grout Formulation and Waste Form Qualification
Energy Technology Data Exchange (ETDEWEB)
Um, Wooyong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Williams, B. D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Snyder, Michelle M. V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Guohui [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
2016-05-23
This report describes the results from liquid secondary waste (LSW) grout formulation and waste form qualification tests performed at Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions (WRPS) to evaluate new formulations for preparing a grout waste form with high-sulfate secondary waste simulants and the release of key constituents from these grout monoliths. Specific objectives of the LSW grout formulation and waste form qualification tests described in this report focused on five activities: 1.preparing new formulations for the LSW grout waste form with high-sulfate LSW simulants and solid characterization of the cured LSW grout waste form 2.conducting the U.S. Environmental Protection Agency (EPA) Method 1313 leach test (EPA 2012) on the grout prepared with the new formulations, which solidify sulfate-rich Hanford Tank Waste Treatment and Immobilization Plant (WTP) off-gas condensate secondary waste simulant, using deionized water (DIW) 3.conducting the EPA Method 1315 leach tests (EPA 2013) on the grout monoliths made with the new dry blend formulations and three LSW simulants (242-A evaporator condensate, Environmental Restoration Disposal Facility (ERDF) leachate, and WTP off-gas condensate) using two leachants, DIW and simulated Hanford Integrated Disposal Facility (IDF) Site vadose zone pore water (VZPW) 4.estimating the 99Tc desorption Kd (distribution coefficient) values for 99Tc transport in oxidizing conditions to support the IDF performance assessment (PA) 5.estimating the solubility of 99Tc(IV)-bearing solid phases for 99Tc transport in reducing conditions to support the IDF PA.
Larvicidal activity of neem oil (Azadirachta indica formulation against mosquitoes
Directory of Open Access Journals (Sweden)
Dua Virendra K
2009-06-01
Full Text Available Abstract Background Mosquitoes transmit serious human diseases, causing millions of deaths every year. Use of synthetic insecticides to control vector mosquitoes has caused physiological resistance and adverse environmental effects in addition to high operational cost. Insecticides of botanical origin have been reported as useful for control of mosquitoes. Azadirachta indica (Meliaceae and its derived products have shown a variety of insecticidal properties. The present paper discusses the larvicidal activity of neem-based biopesticide for the control of mosquitoes. Methods Larvicidal efficacy of an emulsified concentrate of neem oil formulation (neem oil with polyoxyethylene ether, sorbitan dioleate and epichlorohydrin developed by BMR & Company, Pune, India, was evaluated against late 3rd and early 4th instar larvae of different genera of mosquitoes. The larvae were exposed to different concentrations (0.5–5.0 ppm of the formulation along with untreated control. Larvicidal activity of the formulation was also evaluated in field against Anopheles, Culex, and Aedes mosquitoes. The formulation was diluted with equal volumes of water and applied @ 140 mg a.i./m2 to different mosquito breeding sites with the help of pre calibrated knapsack sprayer. Larval density was determined at pre and post application of the formulation using a standard dipper. Results Median lethal concentration (LC50 of the formulation against Anopheles stephensi, Culex quinquefasciatus and Aedes aegypti was found to be 1.6, 1.8 and 1.7 ppm respectively. LC50 values of the formulation stored at 26°C, 40°C and 45°C for 48 hours against Ae. aegypti were 1.7, 1.7, 1.8 ppm while LC90 values were 3.7, 3.7 and 3.8 ppm respectively. Further no significant difference in LC50 and LC90 values of the formulation was observed against Ae. aegypti during 18 months storage period at room temperature. An application of the formulation at the rate of 140 mg a.i./m2 in different breeding
Hamiltonian formulation of teleparallel gravity
Ferraro, Rafael; Guzmán, María José
2016-11-01
The Hamiltonian formulation of the teleparallel equivalent of general relativity is developed from an ordinary second-order Lagrangian, which is written as a quadratic form of the coefficients of anholonomy of the orthonormal frames (vielbeins). We analyze the structure of eigenvalues of the multi-index matrix entering the (linear) relation between canonical velocities and momenta to obtain the set of primary constraints. The canonical Hamiltonian is then built with the Moore-Penrose pseudoinverse of that matrix. The set of constraints, including the subsequent secondary constraints, completes a first-class algebra. This means that all of them generate gauge transformations. The gauge freedoms are basically the diffeomorphisms and the (local) Lorentz transformations of the vielbein. In particular, the Arnowitt, Deser, and Misner algebra of general relativity is recovered as a subalgebra.
On Hamiltonian formulation of cosmologies
Indian Academy of Sciences (India)
K D Krori; S Dutta
2000-03-01
Novello et al [1,2] have shown that it is possible to ﬁnd a pair of canonically conjugate variables (written in terms of gauge-invariant variables) so as to obtain a Hamiltonian that describes the dynamics of a cosmological system. This opens up the way to the usual technique of quantization. Elbaz et al [4] have applied this method to the Hamiltonian formulation of FRW cosmological equations. This note presents a generalization of this approach to a variety of cosmologies. A general Schrödinger wave equation has been derived and exact solutions have been worked out for the stiff matter era for some cosmological models. It is argued that these solutions appear to hint at their possible relevance in the early phase of cosmological evolution.
Hamiltonian formulation of teleparallel gravity
Ferraro, Rafael
2016-01-01
The Hamiltonian formulation of the teleparallel equivalent of general relativity (TEGR) is developed from an ordinary second-order Lagrangian, which is written as a quadratic form of the coefficients of anholonomy of the orthonormal frames (vielbeins). We analyze the structure of eigenvalues of the multi-index matrix entering the (linear) relation between canonical velocities and momenta to obtain the set of primary constraints. The canonical Hamiltonian is then built with the Moore-Penrose pseudo-inverse of that matrix. The set of constraints, including the subsequent secondary constraints, completes a first class algebra. This means that all of them generate gauge transformations. The gauge freedoms are basically the diffeomorphisms, and the (local) Lorentz transformations of the vielbein. In particular, the ADM algebra of general relativity is recovered as a sub-algebra.
Liposomal formulations of cytotoxic drugs.
Janknegt, R
1996-07-01
Liposomes are microscopic particles of lipid bilayer membrane that enclose aqueous internal compartments. These drug-delivery systems offer a very interesting opportunity for delivering cytotoxic drugs with equal or improved clinical efficacy and reduced toxicity. The most important clinical application of liposomes until now has been the inclusion of amphotericin B. At the same dose level, liposomal amphotericin B is as effective or slightly less effective than the conventional formulation, but much higher dosages, up to 5-7 mg kg-1day-1, can be given with acceptable toxicity. There are three preparations of cytotoxic drugs in an advanced stage of commercial development. Two of these (Doxil and TLD D99) contain doxorubicin and the other (DaunoXome) contains daunorubicin. The cardiac toxicity of the three preparations under clinical evaluation appears to be low in comparison with conventional doxorubicin or daunorubicin. No direct comparisons between the new formulations are available, so it is not yet possible to make any statements concerning their relative efficacy and toxicity. DaunoXome is the only drug that is approved in any country, and is also the best documented. It is too early to make recommendations concerning the place of these drugs in therapy. The marked increase in concentrations at the site of the tumour has yet to lead to increased therapeutic efficacy. These findings need further investigation. The efficacy of liposomal preparations in Kaposi's sarcoma appears to be similar to that of standard therapy and the clinical tolerance is good. Perhaps combination therapy with other cytotoxic agents could result in improved clinical efficacy. Their cost will probably be high in comparison with standard therapies.
Sharma, Charu; Biswas, Nihar R; Ojha, Shreesh; Velpandian, Thirumurthy
2016-01-01
Objective Corneal permeability of drugs is an important factor used to assess the efficacy of topical preparations. Transcorneal penetration of drugs from aqueous formulation is governed by various physiological, physiochemical, and formulation factors. In the present study, we investigated the effect of formulation factors like concentration, pH, and volume of instillation across the cornea using cassette dosing technique for ophthalmic fluoroquinolones (FQs). Materials and methods Sterile cocktail formulations were prepared using four congeneric ophthalmic FQs (ofloxacin, sparfloxacin, pefloxacin mesylate, and gatifloxacin) at concentrations of 0.025%, 0.5%, and 0.1%. Each formulation was adjusted to different pH ranges (4.5, 7.0, and 8.0) and assessed for transcorneal penetration in vivo in rabbit’s cornea (n=4 eyes) at three different volumes (12.5, 25, and 50 μL). Aqueous humor was aspirated through paracentesis after applying local anesthesia at 0, 5, 15, 30, 60, 120, and 240 minutes postdosing. The biosamples collected from a total of 27 groups were analyzed using liquid chromatography–tandem mass spectroscopy to determine transcorneal permeability of all four FQs individually. Results Increase in concentration showed an increase in penetration up to 0.05%; thereafter, the effect of concentration was found to be dependent on volume of instillation as we observed a decrease in transcorneal penetration. The highest transcorneal penetration of all FQs was observed at pH 7.0 at concentration 0.05% followed by 0.025% at pH 4.5. Lastly, increasing the volume of instillation from 12.5 to 50 μL showed a significant fall in transcorneal penetration. Conclusion The study concludes that formulation factors showed discernible effect on transcorneal permeation; therefore, due emphasis should be given on drug development and design of ophthalmic formulation. PMID:26955263
Computational solid mechanics variational formulation and high order approximation
Bittencourt, Marco L
2014-01-01
INTRODUCTIONInitial AspectsBarsShaftsBeamsTwo-dimensional ProblemsPlatesLinear Elastic SolidsEQUILIBRIUM OF PARTICLES AND RIGID BODIESIntroductionDiagrammatic ConventionsEquilibrium of ParticlesEquilibrium of Rigid BodiesPrinciple of Virtual Power (PVP)Some aspects about the definition of powerFinal commentsProblemsFORMULATION AND APPROXIMATION OF BARSIntroductionKinematicsStrain MeasureRigid actionsDetermination of Internal LoadsDetermination of External LoadsEquilibriumMaterial BehaviorApplication of the Constitutive EquationDesign and VerificationBars Subjected to Temperature ChangesVolume
The implementation of a hybrid resultant matrix formulation
Ahmad, Shamsatun Nahar; Aris, Nor'aini
2015-10-01
The resultant matrix constructed in this paper is based on the Sylvester-Bèzout formulation which gives a hybrid resultant matrix consisting of the Sylvester and Bèzout blocks. In this work, a new algorithm for the construction has been developed and implemented as a computer package written in C++. The empirical results of the implementation on certain systems of multivariate polynomials are observed and compared to its mixed volume of subdivision Minkowski sum for determining the existence of exact resultant. An application for abstracting the resultant from the determinant of the matrix and determining the solutions of the given system of equations is illustrated.
Danciu, Corina; Berkó, Szilvia; Varju, Gábor; Balázs, Boglárka; Kemény, Lajos; Németh, István Balázs; Cioca, Andreea; Petruș, Alexandra; Dehelean, Cristina; Cosmin, Citu Ioan; Amaricai, Elena; Toma, Claudia Crina
2015-07-08
A lamellar lyotropic liquid crystal genistein-based formulation (LLC-Gen) was prepared in order to increase the aqueous solubility of the lipophilic phytocompound genistein. The formulation was applied locally, in a murine model of melanoma, with or without electroporation. The results demonstrated that, when the formulation was applied by electroporation, the tumors appeared later. During the 21 days of the experiment, the LLC-Gen formulation decreased the tumor volume, the amount of melanin and the degree of erythema, but when electroporation was applied, all these parameters indicated a better prognosis even (lower tumor volume, amount of melanin and degree of erythema). Although hematoxylin-eosin (HE) staining confirmed the above events, application of the LLC-Gen formulation by electroporation did not lead to a significant effect in terms of the serum concentrations of the protein S100B and serum neuron specific enolase (NSE), or the tissue expression of the platelet-derived growth factor receptor β (PDGFRβ) antibody.
Hemolytic and pharmacokinetic studies of liposomal and particulate amphotericin B formulations.
Serrano, Dolores R; Hernández, Leticia; Fleire, Laura; González-Alvarez, Iban; Montoya, Ana; Ballesteros, María P; Dea-Ayuela, María A; Miró, Guadalupe; Bolás-Fernández, Francisco; Torrado, Juan J
2013-04-15
Amphotericin B (AmB) is a very effective antifungal and antiparasitic drug with a narrow therapeutic window. To improve its efficacy/toxicity balance, new controlled release formulations have been developed based on different encapsulation systems, aggregation states and particle sizes modifications. The kinetics of the hemolytic process was studied not only to characterize the toxicity of different formulations but also as an indicator of drug release. Pharmacokinetic studies in beagle dogs were carried out with those formulations that exhibited the least hemolytic toxicity: liposomal formulation (AmBisome), poly-aggregated AmB and encapsulated particulate AmB formulation. A novel poly-aggregated AmB formulation proved to be comparable in terms of low hemolytic activity with the marketed gold standard formulation: AmBisome. Its pharmacokinetic profile, characterized by a smaller area under the curve and larger volume of distribution, was markedly different from AmBisome, resulting in a cost-effective alternative for the treatment of leishmaniasis which can enhance the AmB passive target by the uptake by the cells of the reticulo-endothelial system. Effects of different variables such as type of formulation, dose, microencapsulation, anesthesia and dog's healthy state on AmB pharmacokinetics were studied.
Formulation effects on the release of silica dioxide nanoparticles from paint debris to water.
Zuin, Stefano; Massari, Andrea; Ferrari, Arlen; Golanski, Luana
2014-04-01
Waterborne paints with integrated nanoparticles have been recently introduced into the market as nanoparticles offer improved or novel functionalities to paints. However, the release of nanoparticles during the life cycle of nano-enhanced paint has only been studied to a very limited extent. The paint composition could determine in what quantities and forms the nanoparticles are released. In this work, paint formulations containing the same amount of silicon dioxide (SiO2) nanoparticles but differing in the pigment volume concentration (PVC) and in amount and type of binder and pigment, were studied through leaching test to investigate the influence of these parameters on release of Si from paint. The results indicate greater release of Si, about 1.7 wt.% of the SiO2 nanoparticles in the paint, for paint formulated with higher PVC value (63%), suggesting that the PVC is a crucial factor for release of SiO2 nanoparticles from paints. This hypothesis was also based on the fact that agglomerates of SiO2 nanoparticles were only found in leachates from paint with higher PVC. A paint sample with the higher amount of binder and less calcite filler exhibited a lower release of Si among the paints with a low PVC value (35%), and no SiO2 particles were detected in leachates collected from this paint. This could be due to the fact that a high portion of binder forms a suitable matrix to hold the SiO2 ENPs in paint. The paint sample in which the amount of calcite was partially substituted with TiO2 pigment did not show an important reduction on Si release. Our work suggests that paint debris containing SiO2 nanoparticles may release a limited amount of Si into the environment, and that by adjusting the properties of the binder in combination with common pigments it is possible to reduce the release of SiO2 nanoparticles.
Analytical formulation of lunar cratering asymmetries
Wang, Nan
2016-01-01
We formulate the lunar cratering distribution and verify the cratering asymmetries generated by the main-belt asteroids (MBAs) as well as the near-Earth objects (NEOs). Based on a planar model that excludes the terrestrial and lunar gravitations on the impactors and assuming the impactor encounter speed with Earth $v_{\\rm{enc}}$ is higher than the lunar orbital speed $v_{\\rm{M}}$, we rigorously integrated the lunar cratering distribution, and derived its approximation to the first order of $v_{\\rm{M}}/v_{\\rm{enc}}$. Numerical simulations of lunar bombardment by the MBAs during the late heavy bombardment were performed with an Earth-Moon distance $a_{\\rm{M}}$ = 20--60 Earth radii in five cases. The analytical model directly proves the existence of a leading/trailing asymmetry and the absence of near/far asymmetry. The approximate form of the leading/trailing asymmetry is $(1 + A_1 \\cos\\beta)$, which decreases as the apex distance $\\beta$ increases. The numerical simulations show evidence of a pole/equator asym...
Institute of Scientific and Technical Information of China (English)
王波; 王强
2009-01-01
The Finite volume backward Euler difference method is established to discuss two-dimensional parabolic integro-differential equations.These results are new for finite volume element methods for parabolic integro-differential equations.
An exact approach for aggregated formulations
DEFF Research Database (Denmark)
Gamst, Mette; Spoorendonk, Simon
optimality cannot be guaranteed by branching on the aggregated variables. In this presentation, we propose a general method for solving aggregated formulations, such that the solution is optimal to the original problem. The method is based on applying Benders’ decomposition on a combination of the original...... to mathematical formulations with a different solution space than that for the original formulation, i.e., the aggregated formulation may be a relaxation of the original problem. In a branch-and-bound context, variable aggregation can also lead to a formulation where branching is not trivial, for example when...... and aggregated formulations. Put in a branch-and-bound context, branching can be performed on the original variables to ensure optimality. We show how to apply the method on well-known optimization problems....
Einstein equations with fluctuating volume
Dzhunushaliev, Vladimir; Quevedo, Hernando
2017-07-01
We develop a simple model to study classical fields on the background of a fluctuating spacetime volume. It is applied to formulate the stochastic Einstein equations with a perfect-fluid source. We investigate the particular case of a stochastic Friedmann-Lema\\^itre-Robertson-Walker cosmology, and show that the resulting field equations can lead to solutions which avoid the initial big bang singularity. By interpreting the fluctuations as the result of the presence of a quantum spacetime, we conclude that classical singularities can be avoided even within a stochastic model that include quantum effects in a very simple manner.
On fictitious domain formulations for Maxwell's equations
DEFF Research Database (Denmark)
Dahmen, W.; Jensen, Torben Klint; Urban, K.
2003-01-01
We consider fictitious domain-Lagrange multiplier formulations for variational problems in the space H(curl: Omega) derived from Maxwell's equations. Boundary conditions and the divergence constraint are imposed weakly by using Lagrange multipliers. Both the time dependent and time harmonic...... formulations of the Maxwell's equations are considered. and we derive well-posed formulations for both cases. The variational problem that arises can be discretized by functions that do not satisfy an a-priori divergence constraint....
Formulation and optimization of potassium iodide tablets
Al-Achi, Antoine; Patel, Binit
2014-01-01
The use of potassium iodide (KI) as a protective agent against accidental radioactive exposure is well established. In this study, we aimed to prepare a KI tablet formulation using a direct compression method. We utilized Design of Experiment (DoE)/mixture design to define the best formulation with predetermined physical qualities as to its dissolution, hardness, assay, disintegration, and angle of repose. Based on the results from the DoE, the formulation had the following components (%w/w):...
Formulation of disperse systems science and technology
Tadros, Tharwat F
2014-01-01
This book presents comprehensively the science and technology behind the formulation of disperse systems like emulsions, suspensions, foams and others. Starting with a general introduction, the book covers a broad range of topics like the role of different classes of surfactants, stability of disperse systems, formulation of different dispersions, evaluation of formulations and many more. Many examples are included, too. Written by the experienced author and editor Tharwart Tadros, this book is indispensable for every scientist working in the field.
CANONICAL FORMULATION OF NONHOLONOMIC CONSTRAINED SYSTEMS
Institute of Scientific and Technical Information of China (English)
GUO YONG-XIN; YU YING; HUANG HAI-JUN
2001-01-01
Based on the Ehresmann connection theory and symplectic geometry, the canonical formulation of nonholonomic constrained mechanical systems is described. Following the Lagrangian formulation of the constrained system, the Hamiltonian formulation is given by Legendre transformation. The Poisson bracket defined by an anti-symmetric tensor does not satisfy the Jacobi identity for the nonintegrability of nonholonomic constraints. The constraint manifold can admit symplectic submanifold for some cases, in which the Lie algebraic structure exists.
FORMULATION OF CLINDAMYCIN NANO-EMULSION
Directory of Open Access Journals (Sweden)
K. Jiyauddin *, A. Fadli , J. C. Wei , A. Jawad , A. D. Samer , M. Kaleemullah, S. Budiasih, S. Rasha , M. R. Rasny , Y. K. Sung , A. H. Junainah , H. Todo and Y. Eddy
2015-05-01
Full Text Available Nano-emulsions consist of fine oil-in-water or water-in-oil dispersions, having droplets covering the size range of 10 - 600 nm. The aim of this study is to formulate nano-emulsion of Clindamycin by using Emulsion Phase Inversion method and olive oil as the oil phase. Pseudo ternary phase diagram was first developed by using distilled water, olive oil and mixture of surfactants (Tween®80 and Span®20 at a ratio of 1:1. Then, appearance test and microscopic examination were done for all the pre-formulation. Three potential pre-formulation were then selected and incorporated with the Clindamycin Phosphate and Methyl Paraben. The mean droplet size and stability studies were done for these three formulations. Clindamycin Nano-emulsions were not obtained using the Emulsion Phase Inversion (EPI method in this study, whereby the mean droplet sizes were in micro-range. However, out of all the three formulations which undergone extensive studies which include the heating-cooling cycle, whereby the formulation F8 and F17 were found to be physically stable. Significant differences were identified on the pH value and viscosity measurement for all the three formulations which undergone the heating-cooling cycle; except for the pH in F17. Furthermore, the formulation F8 had the smallest droplet size of 0.92 µm. Future research on this topic is needed to reduce the droplet size of the formulation.
A new formulation of fenofibrate: suprabioavailable tablets.
Guichard, J P; Blouquin, P; Qing, Y
2000-01-01
The rationale for, and development of, a new suprabioavailable fenofibrate tablet formulation is described. The new suprabioavailable tablet formulation combines well-established micronisation technology with a new micro-coating process. The new formulation provides more predictable and reliable drug absorption. Owing to the strong relationship between the fenofibrate dissolution performance and its oral bioavailability, equivalent plasma levels of active principal are achieved at a lower dose, with less inter-subject variability and a reduced food effect. The new suprabioavailable tablet may, therefore, be a more efficient and better tolerated formulation.
Necessity of rethinking oral pediatric formulations.
Bar-Shalom, Daniel
2014-02-01
This commentary reviews the difficulties in formulating oral products for children. The significance of the fragmentation of the pediatric population in terms of development and ability to ingest different dosage formulations is examined. It is postulated that a flexible formulation, acceptable by all patient groups, is needed, and an automated compounding concept is proposed. The finishing of the formulation is done at the dispensing pharmacy using an automated process. The individual components (pudding-like carrier, microencapsulated drug, and the dispensing robot and its software) are reviewed. The involvement of different stakeholders is considered because new regulatory, clinical, and marketing thinking is required. Copyright © 2014 Elsevier HS Journals, Inc. All rights reserved.
MOND and its bimetric formulation
Milgrom, Mordehai
2013-01-01
I first give a succinct account of the MOND paradigm--emphasizing the centrality of scale invariance in the nonrelativistic, deep-MOND limit--and describing rudiments of its phenomenology. I then present my credo, and some generalities, concerning existing MOND theories. Then I concentrate on one relativistic formulation of MOND in the form of a bimetric theory (BIMOND). I describe its various limits: the weak field, with application to gravitational waves, the nonrelativistic limit, and their further deep-MOND (low acceleration) limits, which are scale invariant. Other aspects of BIMOND that have been explored are aspects of cosmology, matter fluctuations in cosmology, and matter-twin-matter interactions. BIMOND remains largely unexplored, despite its promise in several regards: It tends to GR for a0 goes to 0 (a0 is the MOND constant); it has a simple nonrelativistic limit; it describes gravitational lensing correctly; and, it has a generic appearance of a cosmological-constant term that is of order a0^2/c^...
Postmodern string theory stochastic formulation
Aurilia, A
1994-01-01
In this paper we study the dynamics of a statistical ensemble of strings, building on a recently proposed gauge theory of the string geodesic field. We show that this stochastic approach is equivalent to the Carath\\'eodory formulation of the Nambu-Goto action, supplemented by an averaging procedure over the family of classical string world-sheets which are solutions of the equation of motion. In this new framework, the string geodesic field is reinterpreted as the Gibbs current density associated with the string statistical ensemble. Next, we show that the classical field equations derived from the string gauge action, can be obtained as the semi-classical limit of the string functional wave equation. For closed strings, the wave equation itself is completely analogous to the Wheeler-DeWitt equation used in quantum cosmology. Thus, in the string case, the wave function has support on the space of all possible spatial loop configurations. Finally, we show that the string distribution induces a multi-phase, or ...
Jung-Woon Yoo, John
2016-06-01
Since customer preferences change rapidly, there is a need for design processes with shorter product development cycles. Modularization plays a key role in achieving mass customization, which is crucial in today's competitive global market environments. Standardized interfaces among modularized parts have facilitated computational product design. To incorporate product size and weight constraints during computational design procedures, a mixed integer programming formulation is presented in this article. Product size and weight are two of the most important design parameters, as evidenced by recent smart-phone products. This article focuses on the integration of geometric, weight and interface constraints into the proposed mathematical formulation. The formulation generates the optimal selection of components for a target product, which satisfies geometric, weight and interface constraints. The formulation is verified through a case study and experiments are performed to demonstrate the performance of the formulation.
DEFF Research Database (Denmark)
Yoon, Gil Ho; Jensen, Jens Stissing; Sigmund, Ole
2007-01-01
The paper presents a gradient-based topology optimization formulation that allows to solve acoustic-structure (vibro-acoustic) interaction problems without explicit boundary interface representation. In acoustic-structure interaction problems, the pressure and displacement fields are governed...... by Helmholtz equation and the elasticity equation, respectively. Normally, the two separate fields are coupled by surface-coupling integrals, however, such a formulation does not allow for free material re-distribution in connection with topology optimization schemes since the boundaries are not explicitly...... given during the optimization process. In this paper we circumvent the explicit boundary representation by using a mixed finite element formulation with displacements and pressure as primary variables (a u/p-formulation). The Helmholtz equation is obtained as a special case of the mixed formulation...
Modeling Mitochondrial Bioenergetics with Integrated Volume Dynamics
Bazil, Jason N.; Buzzard, Gregery T.; Ann E Rundell
2010-01-01
Author Summary Mathematically modeling biological systems challenges our current understanding of the physical and biochemical events contributing to the observed dynamics. It requires careful consideration of hypothesized mechanisms, model development assumptions and details regarding the experimental conditions. We have adopted a modeling approach to translate these factors that explicitly considers the thermodynamic constraints, biochemical states and reaction mechanisms during model devel...
Integrated Strike Avionics Study. Volume 1
1980-10-01
z C, ( LL LUU LL Z CH 1 i zo < NIf ~3 0A.199~ 11 2 1 .86 V_ _ _ _ _ _ _ __ _ _ _ _ __) LLI 0 z w fL w z ZW>Z) coɘ LUU LL.4 LL II II zn- U C) UU 0...C0 * C C4 I U. to s 0- - o. 4) r_) E C 0 Lu 4) ZS )S U. -0 S D Q oA 4 AU .U 1-: 0 = 0c -4- *C.- *0 ) Lu tC; co0 < O- *~-J 0 0 ~ 113 a. Circle...a * * . 0 .!c~’ 117 ~ MfJP41!M 0 00 uonM in esini CL. o Iwo1J~ :3 ~m~iE 0 0o 0S nJ 00 E.. 0 c- C4 - ’w u z 0 .202L n 0 w 0 0 0(Ua Zo mE L - (U 00 w 0
Development of novel solid-phase protein formulations
Montalvo Ortiz, Brenda Liz
Proteins are the next-generation drugs for the treatment of several diseases. However, the number of protein drugs is still limited due to the physical or chemical instability of proteins during processing, formulation, storage, and delivery. The formulation of proteins at the solid state has advantages over liquid state, such as improved stability during long-term storage and delivery and decreases transportation costs. In this dissertation, we developed new solid-phase protein formulations in which the integrity of the protein was not compromised. The long term goal of this research was to use these protein formulations to improve protein stability in drug delivery devices, such as poly(lactic-co-glycolic) acid (PLGA). The first solid-phase protein formulation developed in this investigation was named "glassification". We proposed glassification as an alternative protein dehydration technique to the common used one, lyophilization, because this last method involves a series of steps which are detrimental to protein structure and stability. The glassification method consisted on protein dehydration by the use of organic solvents. As a result of the glassification process a small (micrometer size range) protein solid bead was obtained. The proteins used to study the glassification process were lysozyme (LYS), alpha-chymotrypsin (CHYMO) and horseradish peroxidase (HRP). These studies revealed that the glassification process itself did not alter protein structure and the activity was preserved. Ethyl acetate was the most effective organic solvent for protein glassification because it led to the highest protein residual activity, no insoluble aggregate formation and is a relatively non-toxic solvent, which allow the incorporation of these protein microparticles in PLGA microspheres. The incorporation of spherical HRP microparticles into PLGA microspheres resulted in superior properties when compared with encapsulated lyophilized HRP powder, such as improved release
Product design - Molecules, devices, functional products, and formulated products
DEFF Research Database (Denmark)
Gani, Rafiqul; Ng, Ka M.
2015-01-01
Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...
Product Design – From Molecules to Formulations to Devices
DEFF Research Database (Denmark)
Gani, Rafiqul; Ng, Ka M.
2014-01-01
Product design is a multidisciplinary and diverse subject. This article focuses on product conceptualization (what-to-make) and briefly reviews the corresponding manufacturing processes (how-to-make). Four product types are considered – molecular products, formulated products, devices...... and functional products. For molecular products, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-molecular modelling approach to generate the formula with the specified product attributes is followed....... For devices and functional products, conceptual product design is carried out by modelling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on experience. The results are product specifications in terms of the type of ingredients...
Exponential stretch-rotation (ESR) formulation of general relativity
Khokhlov, A M
2003-01-01
We study a tensorial exponential transformation of a three-dimensional metric of space-like hypersurfaces embedded in a four-dimensional space-time, $\\gamma_{ij} = e^{\\epsilon_{ikm}\\theta_m} e^{\\phi_k} e^{-\\epsilon_{jkn}\\theta_n}$, where $\\phi_k$ are logarithms of the eigenvalues of $\\gamma_{ij}$, $\\theta_k$ are rotation angles, and $\\epsilon_{ijk}$ is a fully anti-symmetric symbol. Evolution part of Einstein's equations, formulated in terms of $\\phi_k$ and $\\theta_k$, describes time evolution of the metric at every point of a hyper-surface as a continuous stretch and rotation of a local coordinate system in a tangential space. The exponential stretch-rotation (ESR) transformation generalizes particular exponential transformations used previously in cases of spatial symmetry. The ESR 3+1 formulation of Einstein's equations may have certain advantages for long-term stable integration of these equations.
Novel genetic loci associated with hippocampal volume
D.P. Hibar (Derrek); H.H.H. Adams (Hieab); N. Jahanshad (Neda); G. Chauhan (Ganesh); J.L. Stein; E. Hofer (Edith); M.E. Rentería (Miguel); J.C. Bis (Joshua); A. Arias-Vásquez (Alejandro); Ikram, M.K. (M. Kamran); S. Desrivières (Sylvane); M.W. Vernooij (Meike); L. Abramovic; S. Alhusaini (Saud); N. Amin (Najaf); M. Andersson (Micael); K. Arfanakis (Konstantinos); B. Aribisala (Benjamin); N.J. Armstrong (Nicola J.); L. Athanasiu (Lavinia); T. Axelsson (Tomas); A.H. Beecham (Ashley); A. Beiser (Alexa); M. Bernard (Manon); S.H. Blanton (Susan H.); M.M. Bohlken (Marc M.); M.P.M. Boks (Marco); L.B.C. Bralten (Linda); A.M. Brickman (Adam M.); Carmichael, O. (Owen); M.M. Chakravarty (M. Mallar); Q. Chen (Qiang); C.R.K. Ching (Christopher); V. Chouraki (Vincent); G. Cuellar-Partida (Gabriel); F. Crivello (Fabrice); A. den Braber (Anouk); Doan, N.T. (Nhat Trung); S.M. Ehrlich (Stefan); S. Giddaluru (Sudheer); A.L. Goldman (Aaron L.); R.F. Gottesman (Rebecca); O. Grimm (Oliver); M.D. Griswold (Michael); T. Guadalupe (Tulio); Gutman, B.A. (Boris A.); J. Hass (Johanna); U.K. Haukvik (Unn); D. Hoehn (David); A.J. Holmes (Avram); M. Hoogman (Martine); D. Janowitz (Deborah); T. Jia (Tianye); Jørgensen, K.N. (Kjetil N.); N. Karbalai (Nazanin); D. Kasperaviciute (Dalia); S. Kim (Shinseog); M. Klein (Marieke); B. Kraemer (Bernd); P.H. Lee (Phil); D.C. Liewald (David C.); L.M. Lopez (Lorna); M. Luciano (Michelle); C. MacAre (Christine); Marquand, A.F. (Andre F.); M. Matarin (Mar); R. Mather; M. Mattheisen (Manuel); McKay, D.R. (David R.); Milaneschi, Y. (Yuri); S. Muñoz Maniega (Susana); K. Nho (Kwangsik); A.C. Nugent (Allison); P. Nyquist (Paul); Loohuis, L.M.O. (Loes M. Olde); J. Oosterlaan (Jaap); M. Papmeyer (Martina); Pirpamer, L. (Lukas); B. Pütz (Benno); A. Ramasamy (Adaikalavan); Richards, J.S. (Jennifer S.); S.L. Risacher (Shannon); R. Roiz-Santiañez (Roberto); N. Rommelse (Nanda); S. Ropele (Stefan); E.J. Rose (Emma); N.A. Royle (Natalie); T. Rundek (Tatjana); P.G. Sämann (Philipp); Saremi, A. (Arvin); C.L. Satizabal (Claudia L.); L. Schmaal (Lianne); N.J. Schork (Nicholas); Shen, L. (Li); J. Shin (Jean); Shumskaya, E. (Elena); A.V. Smith (Albert Vernon); R. Sprooten (Roy); V.M. Strike (Vanessa); A. Teumer (Alexander); D. Tordesillas-Gutierrez (Diana); R. Toro (Roberto); D. Trabzuni (Danyah); S. Trompet (Stella); D. Vaidya (Dhananjay); J. van der Grond (Jeroen); S. van der Lee (Sven); Van Der Meer, D. (Dennis); M.M.J. Van Donkelaar (Marjolein M. J.); K.R. van Eijk (Kristel); T.G.M. van Erp (Theo G.); Van Rooij, D. (Daan); E. Walton (Esther); L.T. Westlye (Lars); C.D. Whelan (Christopher); B.G. Windham (B Gwen); A.M. Winkler (Anderson); K. Wittfeld (Katharina); G. Woldehawariat (Girma); A. Björnsson (Asgeir); Wolfers, T. (Thomas); L.R. Yanek (Lisa); Yang, J. (Jingyun); A.P. Zijdenbos; M.P. Zwiers (Marcel); I. Agartz (Ingrid); L. Almasy (Laura); D. Ames (David); Amouyel, P. (Philippe); O.A. Andreassen (Ole A.); S. Arepalli (Sampath); A.A. Assareh; S. Barral (Sandra); M.E. Bastin (Mark); Becker, D.M. (Diane M.); J.T. Becker; D.A. Bennett (David A.); J. Blangero (John); H. van Bokhoven (Hans); D.I. Boomsma (Dorret); H. Brodaty (Henry); R.M. Brouwer (Rachel); H.G. Brunner; M. Buckner; J.K. Buitelaar (Jan); K. Bulayeva (Kazima); W. Cahn (Wiepke); V.D. Calhoun Vince D. (V.); D.M. Cannon (Dara); G. Cavalleri (Gianpiero); Cheng, C.-Y. (Ching-Yu); S. Cichon (Sven); M.R. Cookson (Mark); A. Corvin (Aiden); B. Crespo-Facorro (Benedicto); J.E. Curran (Joanne); M. Czisch (Michael); A.M. Dale (Anders); G.E. Davies (Gareth); A.J. de Craen (Anton); E.J.C. de Geus (Eco); P.L. de Jager (Philip); G.I. de Zubicaray (Greig); I.J. Deary (Ian J.); S. Debette (Stéphanie); C. DeCarli (Charles); N. Delanty; C. Depondt (Chantal); A.L. DeStefano (Anita); A. Dillman (Allissa); S. Djurovic (Srdjan); D.J. Donohoe (Dennis); D.A. Drevets (Douglas); Duggirala, R. (Ravi); M.D. Dyer (Matthew); C. Enzinger (Christian); S. Erk; T. Espeseth (Thomas); Fedko, I.O. (Iryna O.); Fernández, G. (Guillén); L. Ferrucci (Luigi); S.E. Fisher (Simon); D. Fleischman (Debra); I. Ford (Ian); M. Fornage (Myriam); T. Foroud (Tatiana); P.T. Fox (Peter); C. Francks (Clyde); Fukunaga, M. (Masaki); Gibbs, J.R. (J. Raphael); D.C. Glahn (David); R.L. Gollub (Randy); H.H.H. Göring (Harald H.); R.C. Green (Robert C.); O. Gruber (Oliver); V. Gudnason (Vilmundur); S. Guelfi (Sebastian); Håberg, A.K. (Asta K.); N.K. Hansell (Narelle); J. Hardy (John); C.A. Hartman (C.); Hashimoto, R. (Ryota); K. Hegenscheid (Katrin); J. Heinz (Judith); S. Le Hellard (Stephanie); D.G. Hernandez (Dena); D.J. Heslenfeld (Dirk); Ho, B.-C. (Beng-Choon); P.J. Hoekstra (Pieter); W. Hoffmann (Wolfgang); A. Hofman (Albert); F. Holsboer (Florian); G. Homuth (Georg); N. Hosten (Norbert); J.J. Hottenga (Jouke Jan); M.J. Huentelman (Matthew); H.H. Pol; Ikeda, M. (Masashi); Jack, C.R. (Clifford R.); S. Jenkinson (Sarah); R. Johnson (Robert); Jönsson, E.G. (Erik G.); J.W. Jukema; R. Kahn; Kanai, R. (Ryota); I. Kloszewska (Iwona); Knopman, D.S. (David S.); P. Kochunov (Peter); Kwok, J.B. (John B.); S. Lawrie (Stephen); H. Lemaître (Herve); X. Liu (Xinmin); D.L. Longo (Dan L.); O.L. Lopez (Oscar L.); S. Lovestone (Simon); Martinez, O. (Oliver); J.-L. Martinot (Jean-Luc); V.S. Mattay (Venkata S.); McDonald, C. (Colm); A.M. McIntosh (Andrew); McMahon, F.J. (Francis J.); McMahon, K.L. (Katie L.); P. Mecocci (Patrizia); I. Melle (Ingrid); Meyer-Lindenberg, A. (Andreas); S. Mohnke (Sebastian); Montgomery, G.W. (Grant W.); D.W. Morris (Derek W); T.H. Mosley (Thomas H.); T.W. Mühleisen (Thomas); B. Müller-Myhsok (B.); M.A. Nalls (Michael); M. Nauck (Matthias); T.E. Nichols (Thomas); W.J. Niessen (Wiro); M.M. Nöthen (Markus); L. Nyberg (Lars); Ohi, K. (Kazutaka); R.L. Olvera (Rene); R.A. Ophoff (Roel); M. Pandolfo (Massimo); T. Paus (Tomas); Z. Pausova (Zdenka); B.W.J.H. Penninx (Brenda); Pike, G.B. (G. Bruce); S.G. Potkin (Steven); B.M. Psaty (Bruce); S. Reppermund; M. Rietschel (M.); J.L. Roffman (Joshua); N. Seiferth (Nina); J.I. Rotter (Jerome I.); M. Ryten (Mina); Sacco, R.L. (Ralph L.); P.S. Sachdev (Perminder); A.J. Saykin (Andrew); R. Schmidt (Reinhold); Schmidt, H. (Helena); C.J. Schofield (Christopher); Sigursson, S. (Sigurdur); Simmons, A. (Andrew); A. Singleton (Andrew); S.M. Sisodiya (Sanjay); Smith, C. (Colin); J.W. Smoller; H. Soininen (H.); V.M. Steen (Vidar); D.J. Stott (David J.); J. Sussmann (Jessika); A. Thalamuthu (Anbupalam); A.W. Toga (Arthur W.); B. Traynor (Bryan); J.C. Troncoso (Juan); M. Tsolaki (Magda); C. Tzourio (Christophe); A.G. Uitterlinden (André); Hernández, M.C.V. (Maria C. Valdés); M.P. van der Brug (Marcel); A. van der Lugt (Aad); N.J. van der Wee (Nic); N.E.M. van Haren (Neeltje E.); D. van 't Ent (Dennis); M.J.D. van Tol (Marie-José); B.N. Vardarajan (Badri); B. Vellas (Bruno); D.J. Veltman (Dick); H. Völzke (Henry); H.J. Walter (Henrik); J. Wardlaw (Joanna); A.M.J. Wassink (Annemarie); M.E. Weale (Michael); Weinberger, D.R. (Daniel R.); Weiner, M.W. (Michael W.); Wen, W. (Wei); E. Westman (Eric); T.J.H. White (Tonya); Wong, T.Y. (Tien Y.); Wright, C.B. (Clinton B.); R.H. Zielke (Ronald H.); A.B. Zonderman; N.G. Martin (Nicholas); C.M. van Duijn (Cock); M.J. Wright (Margaret); W.T. Longstreth Jr; G. Schumann (Gunter); H.J. Grabe (Hans Jörgen); B. Franke (Barbara); L.J. Launer (Lenore); S.E. Medland (Sarah Elizabeth); S. Seshadri (Sudha); P.M. Thompson (Paul); M.K. Ikram (Kamran)
2017-01-01
textabstractThe hippocampal formation is a brain structure integrally involved in episodic memory, spatial navigation, cognition and stress responsiveness. Structural abnormalities in hippocampal volume and shape are found in several common neuropsychiatric disorders. To identify the genetic underpi
Novel genetic loci associated with hippocampal volume
Hibar, Derrek P; Adams, Hieab H H; Jahanshad, Neda; Chauhan, Ganesh; Stein, Jason L; Hofer, Edith; Renteria, Miguel E; Bis, Joshua C; Arias-Vasquez, Alejandro; Ikram, M Kamran; Desrivières, Sylvane; Vernooij, Meike W; Abramovic, Lucija|info:eu-repo/dai/nl/34549072X; Alhusaini, Saud; Amin, Najaf; Andersson, Micael; Arfanakis, Konstantinos; Aribisala, Benjamin S; Armstrong, Nicola J; Athanasiu, Lavinia; Axelsson, Tomas; Beecham, Ashley H; Beiser, Alexa; Bernard, Manon; Blanton, Susan H; Bohlken, Marc M; Boks, Marco P|info:eu-repo/dai/nl/286852071; Bralten, Janita; Brickman, Adam M; Carmichael, Owen; Chakravarty, M Mallar; Chen, Qiang; Ching, Christopher R K; Chouraki, Vincent; Cuellar-Partida, Gabriel; Crivello, Fabrice; Den Braber, Anouk; Doan, Nhat Trung; Ehrlich, Stefan; Giddaluru, Sudheer; Goldman, Aaron L; Gottesman, Rebecca F; Grimm, Oliver; Griswold, Michael E; Guadalupe, Tulio; Gutman, Boris A; Hass, Johanna; Haukvik, Unn K; Hoehn, David; Holmes, Avram J; Hoogman, Martine; Janowitz, Deborah; Jia, Tianye; Jørgensen, Kjetil N; Karbalai, Nazanin; Kasperaviciute, Dalia; Kim, Sungeun; Klein, Marieke; Kraemer, Bernd; Lee, Phil H; Liewald, David C M; Lopez, Lorna M; Luciano, Michelle; Macare, Christine; Marquand, Andre F; Matarin, Mar; Mather, Karen A; Mattheisen, Manuel; McKay, David R; Milaneschi, Yuri; Muñoz Maniega, Susana; Nho, Kwangsik; Nugent, Allison C; Nyquist, Paul; Loohuis, Loes M Olde; Oosterlaan, Jaap; Papmeyer, Martina; Pirpamer, Lukas; Pütz, Benno; Ramasamy, Adaikalavan; Richards, Jennifer S; Risacher, Shannon L; Roiz-Santiañez, Roberto; Rommelse, Nanda; Ropele, Stefan; Rose, Emma J; Royle, Natalie A; Rundek, Tatjana; Sämann, Philipp G; Saremi, Arvin; Satizabal, Claudia L; Schmaal, Lianne; Schork, Andrew J; Shen, Li; Shin, Jean; Shumskaya, Elena; Smith, Albert V; Sprooten, Emma; Strike, Lachlan T; Teumer, Alexander; Tordesillas-Gutierrez, Diana; Toro, Roberto; Trabzuni, Daniah; Trompet, Stella; Vaidya, Dhananjay; Van der Grond, Jeroen; Van der Lee, Sven J; Van der Meer, Dennis; Van Donkelaar, Marjolein M J; Van Eijk, Kristel R|info:eu-repo/dai/nl/344497569; Van Erp, Theo G M; Van Rooij, Daan; Walton, Esther; Westlye, Lars T; Whelan, Christopher D; Windham, Beverly G; Winkler, Anderson M; Wittfeld, Katharina; Woldehawariat, Girma; Wolf, Christiane; Wolfers, Thomas; Yanek, Lisa R; Yang, Jingyun; Zijdenbos, Alex; Zwiers, Marcel P; Agartz, Ingrid; Almasy, Laura; Ames, David; Amouyel, Philippe; Andreassen, Ole A; Arepalli, Sampath; Assareh, Amelia A; Barral, Sandra; Bastin, Mark E; Becker, Diane M; Becker, James T; Bennett, David A; Blangero, John; van Bokhoven, Hans; Boomsma, Dorret I; Brodaty, Henry; Brouwer, Rachel M|info:eu-repo/dai/nl/304811432; Brunner, Han G; Buckner, Randy L; Buitelaar, Jan K; Bulayeva, Kazima B; Cahn, Wiepke|info:eu-repo/dai/nl/250566370; Calhoun, Vince D; Cannon, Dara M; Cavalleri, Gianpiero L; Cheng, Ching-Yu; Cichon, Sven; Cookson, Mark R; Corvin, Aiden; Crespo-Facorro, Benedicto; Curran, Joanne E; Czisch, Michael; Dale, Anders M; Davies, Gareth E; De Craen, Anton J M; De Geus, Eco J C; De Jager, Philip L; De Zubicaray, Greig I; Deary, Ian J; Debette, Stéphanie; DeCarli, Charles; Delanty, Norman; Depondt, Chantal; DeStefano, Anita; Dillman, Allissa; Djurovic, Srdjan; Donohoe, Gary; Drevets, Wayne C; Duggirala, Ravi; Dyer, Thomas D; Enzinger, Christian; Erk, Susanne; Espeseth, Thomas; Fedko, Iryna O; Fernández, Guillén; Ferrucci, Luigi; Fisher, Simon E; Fleischman, Debra A; Ford, Ian; Fornage, Myriam; Foroud, Tatiana M; Fox, Peter T; Francks, Clyde; Fukunaga, Masaki; Gibbs, J Raphael; Glahn, David C; Gollub, Randy L; Göring, Harald H H; Green, Robert C; Gruber, Oliver; Gudnason, Vilmundur; Guelfi, Sebastian; Håberg, Asta K; Hansell, Narelle K; Hardy, John; Hartman, Catharina A; Hashimoto, Ryota; Hegenscheid, Katrin; Heinz, Andreas; Le Hellard, Stephanie; Hernandez, Dena G; Heslenfeld, Dirk J; Ho, Beng-Choon; Hoekstra, Pieter J; Hoffmann, Wolfgang; Hofman, Albert; Holsboer, Florian; Homuth, Georg; Hosten, Norbert; Hottenga, Jouke-Jan; Huentelman, Matthew; Pol, Hilleke E Hulshoff|info:eu-repo/dai/nl/142348228; Ikeda, Masashi; Jack, Clifford R; Jenkinson, Mark; Johnson, Robert; Jönsson, Erik G; Jukema, J Wouter; Kahn, René S|info:eu-repo/dai/nl/073778532; Kanai, Ryota; Kloszewska, Iwona; Knopman, David S; Kochunov, Peter; Kwok, John B; Lawrie, Stephen M; Lemaître, Hervé; Liu, Xinmin; Longo, Dan L; Lopez, Oscar L; Lovestone, Simon; Martinez, Oliver; Martinot, Jean-Luc; Mattay, Venkata S; McDonald, Colm; McIntosh, Andrew M; McMahon, Francis J; McMahon, Katie L; Mecocci, Patrizia; Melle, Ingrid; Meyer-Lindenberg, Andreas; Mohnke, Sebastian; Montgomery, Grant W; Morris, Derek W; Mosley, Thomas H; Mühleisen, Thomas W; Müller-Myhsok, Bertram; Nalls, Michael A; Nauck, Matthias; Nichols, Thomas E; Niessen, Wiro J; Nöthen, Markus M; Nyberg, Lars; Ohi, Kazutaka; Olvera, Rene L; Ophoff, Roel A; Pandolfo, Massimo; Paus, Tomas; Pausova, Zdenka; Penninx, Brenda W J H; Pike, G Bruce; Potkin, Steven G; Psaty, Bruce M; Reppermund, Simone; Rietschel, Marcella; Roffman, Joshua L; Romanczuk-Seiferth, Nina; Rotter, Jerome I; Ryten, Mina; Sacco, Ralph L; Sachdev, Perminder S; Saykin, Andrew J; Schmidt, Reinhold; Schmidt, Helena; Schofield, Peter R; Sigursson, Sigurdur; Simmons, Andrew; Singleton, Andrew; Sisodiya, Sanjay M; Smith, Colin; Smoller, Jordan W; Soininen, Hilkka; Steen, Vidar M; Stott, David J; Sussmann, Jessika E; Thalamuthu, Anbupalam; Toga, Arthur W; Traynor, Bryan J; Troncoso, Juan; Tsolaki, Magda; Tzourio, Christophe; Uitterlinden, Andre G; Hernández, Maria C Valdés; Van der Brug, Marcel; van der Lugt, Aad; van der Wee, Nic J A; Van Haren, Neeltje E M|info:eu-repo/dai/nl/271562161; van 't Ent, Dennis; Van Tol, Marie-Jose; Vardarajan, Badri N; Vellas, Bruno; Veltman, Dick J; Völzke, Henry; Walter, Henrik; Wardlaw, Joanna M; Wassink, Thomas H; Weale, Michael E; Weinberger, Daniel R; Weiner, Michael W; Wen, Wei; Westman, Eric; White, Tonya; Wong, Tien Y; Wright, Clinton B; Zielke, Ronald H; Zonderman, Alan B; Martin, Nicholas G; Van Duijn, Cornelia M; Wright, Margaret J; Longstreth, W T; Schumann, Gunter; Grabe, Hans J; Franke, Barbara; Launer, Lenore J; Medland, Sarah E; Seshadri, Sudha; Thompson, Paul M; Ikram, M Arfan
2017-01-01
The hippocampal formation is a brain structure integrally involved in episodic memory, spatial navigation, cognition and stress responsiveness. Structural abnormalities in hippocampal volume and shape are found in several common neuropsychiatric disorders. To identify the genetic underpinnings of hi
Novel genetic loci associated with hippocampal volume
D.P. Hibar (Derrek); H.H.H. Adams (Hieab); N. Jahanshad (Neda); G. Chauhan (Ganesh); J.L. Stein; E. Hofer (Edith); M.E. Rentería (Miguel); J.C. Bis (Joshua); A. Arias-Vásquez (Alejandro); Ikram, M.K. (M. Kamran); S. Desrivières (Sylvane); M.W. Vernooij (Meike); L. Abramovic; S. Alhusaini (Saud); N. Amin (Najaf); M. Andersson (Micael); K. Arfanakis (Konstantinos); B. Aribisala (Benjamin); N.J. Armstrong (Nicola J.); L. Athanasiu (Lavinia); T. Axelsson (Tomas); A.H. Beecham (Ashley); A. Beiser (Alexa); M. Bernard (Manon); S.H. Blanton (Susan H.); M.M. Bohlken (Marc M.); M.P.M. Boks (Marco); L.B.C. Bralten (Linda); A.M. Brickman (Adam M.); Carmichael, O. (Owen); M.M. Chakravarty (M. Mallar); Q. Chen (Qiang); C.R.K. Ching (Christopher); V. Chouraki (Vincent); G. Cuellar-Partida (Gabriel); F. Crivello (Fabrice); A. den Braber (Anouk); Doan, N.T. (Nhat Trung); S.M. Ehrlich (Stefan); S. Giddaluru (Sudheer); A.L. Goldman (Aaron L.); R.F. Gottesman (Rebecca); O. Grimm (Oliver); M.D. Griswold (Michael); T. Guadalupe (Tulio); Gutman, B.A. (Boris A.); J. Hass (Johanna); U.K. Haukvik (Unn); D. Hoehn (David); A.J. Holmes (Avram); M. Hoogman (Martine); D. Janowitz (Deborah); T. Jia (Tianye); Jørgensen, K.N. (Kjetil N.); N. Karbalai (Nazanin); D. Kasperaviciute (Dalia); S. Kim (Shinseog); M. Klein (Marieke); B. Kraemer (Bernd); P.H. Lee (Phil); D.C. Liewald (David C.); L.M. Lopez (Lorna); M. Luciano (Michelle); C. MacAre (Christine); Marquand, A.F. (Andre F.); M. Matarin (Mar); R. Mather; M. Mattheisen (Manuel); McKay, D.R. (David R.); Milaneschi, Y. (Yuri); S. Muñoz Maniega (Susana); K. Nho (Kwangsik); A.C. Nugent (Allison); P. Nyquist (Paul); Loohuis, L.M.O. (Loes M. Olde); J. Oosterlaan (Jaap); M. Papmeyer (Martina); Pirpamer, L. (Lukas); B. Pütz (Benno); A. Ramasamy (Adaikalavan); Richards, J.S. (Jennifer S.); S.L. Risacher (Shannon); R. Roiz-Santiañez (Roberto); N. Rommelse (Nanda); S. Ropele (Stefan); E.J. Rose (Emma); N.A. Royle (Natalie); T. Rundek (Tatjana); P.G. Sämann (Philipp); Saremi, A. (Arvin); C.L. Satizabal (Claudia L.); L. Schmaal (Lianne); N.J. Schork (Nicholas); Shen, L. (Li); J. Shin (Jean); Shumskaya, E. (Elena); A.V. Smith (Albert Vernon); R. Sprooten (Roy); V.M. Strike (Vanessa); A. Teumer (Alexander); D. Tordesillas-Gutierrez (Diana); R. Toro (Roberto); D. Trabzuni (Danyah); S. Trompet (Stella); D. Vaidya (Dhananjay); J. van der Grond (Jeroen); S. van der Lee (Sven); Van Der Meer, D. (Dennis); M.M.J. Van Donkelaar (Marjolein M. J.); K.R. van Eijk (Kristel); T.G.M. van Erp (Theo G.); Van Rooij, D. (Daan); E. Walton (Esther); L.T. Westlye (Lars); C.D. Whelan (Christopher); B.G. Windham (B Gwen); A.M. Winkler (Anderson); K. Wittfeld (Katharina); G. Woldehawariat (Girma); A. Björnsson (Asgeir); Wolfers, T. (Thomas); L.R. Yanek (Lisa); Yang, J. (Jingyun); A.P. Zijdenbos; M.P. Zwiers (Marcel); I. Agartz (Ingrid); L. Almasy (Laura); D. Ames (David); Amouyel, P. (Philippe); O.A. Andreassen (Ole A.); S. Arepalli (Sampath); A.A. Assareh; S. Barral (Sandra); M.E. Bastin (Mark); Becker, D.M. (Diane M.); J.T. Becker; D.A. Bennett (David A.); J. Blangero (John); H. van Bokhoven (Hans); D.I. Boomsma (Dorret); H. Brodaty (Henry); R.M. Brouwer (Rachel); H.G. Brunner; M. Buckner; J.K. Buitelaar (Jan); K. Bulayeva (Kazima); W. Cahn (Wiepke); V.D. Calhoun Vince D. (V.); D.M. Cannon (Dara); G. Cavalleri (Gianpiero); Cheng, C.-Y. (Ching-Yu); S. Cichon (Sven); M.R. Cookson (Mark); A. Corvin (Aiden); B. Crespo-Facorro (Benedicto); J.E. Curran (Joanne); M. Czisch (Michael); A.M. Dale (Anders); G.E. Davies (Gareth); A.J. de Craen (Anton); E.J.C. de Geus (Eco); P.L. de Jager (Philip); G.I. de Zubicaray (Greig); I.J. Deary (Ian J.); S. Debette (Stéphanie); C. DeCarli (Charles); N. Delanty; C. Depondt (Chantal); A.L. DeStefano (Anita); A. Dillman (Allissa); S. Djurovic (Srdjan); D.J. Donohoe (Dennis); D.A. Drevets (Douglas); Duggirala, R. (Ravi); M.D. Dyer (Matthew); C. Enzinger (Christian); S. Erk; T. Espeseth (Thomas); Fedko, I.O. (Iryna O.); Fernández, G. (Guillén); L. Ferrucci (Luigi); S.E. Fisher (Simon); D. Fleischman (Debra); I. Ford (Ian); M. Fornage (Myriam); T. Foroud (Tatiana); P.T. Fox (Peter); C. Francks (Clyde); Fukunaga, M. (Masaki); Gibbs, J.R. (J. Raphael); D.C. Glahn (David); R.L. Gollub (Randy); H.H.H. Göring (Harald H.); R.C. Green (Robert C.); O. Gruber (Oliver); V. Gudnason (Vilmundur); S. Guelfi (Sebastian); Håberg, A.K. (Asta K.); N.K. Hansell (Narelle); J. Hardy (John); C.A. Hartman (C.); Hashimoto, R. (Ryota); K. Hegenscheid (Katrin); J. Heinz (Judith); S. Le Hellard (Stephanie); D.G. Hernandez (Dena); D.J. Heslenfeld (Dirk); Ho, B.-C. (Beng-Choon); P.J. Hoekstra (Pieter); W. Hoffmann (Wolfgang); A. Hofman (Albert); F. Holsboer (Florian); G. Homuth (Georg); N. Hosten (Norbert); J.J. Hottenga (Jouke Jan); M.J. Huentelman (Matthew); H.H. Pol; Ikeda, M. (Masashi); Jack, C.R. (Clifford R.); S. Jenkinson (Sarah); R. Johnson (Robert); Jönsson, E.G. (Erik G.); J.W. Jukema; R. Kahn; Kanai, R. (Ryota); I. Kloszewska (Iwona); Knopman, D.S. (David S.); P. Kochunov (Peter); Kwok, J.B. (John B.); S. Lawrie (Stephen); H. Lemaître (Herve); X. Liu (Xinmin); D.L. Longo (Dan L.); O.L. Lopez (Oscar L.); S. Lovestone (Simon); Martinez, O. (Oliver); J.-L. Martinot (Jean-Luc); V.S. Mattay (Venkata S.); McDonald, C. (Colm); A.M. McIntosh (Andrew); McMahon, F.J. (Francis J.); McMahon, K.L. (Katie L.); P. Mecocci (Patrizia); I. Melle (Ingrid); Meyer-Lindenberg, A. (Andreas); S. Mohnke (Sebastian); Montgomery, G.W. (Grant W.); D.W. Morris (Derek W); T.H. Mosley (Thomas H.); T.W. Mühleisen (Thomas); B. Müller-Myhsok (B.); M.A. Nalls (Michael); M. Nauck (Matthias); T.E. Nichols (Thomas); W.J. Niessen (Wiro); M.M. Nöthen (Markus); L. Nyberg (Lars); Ohi, K. (Kazutaka); R.L. Olvera (Rene); R.A. Ophoff (Roel); M. Pandolfo (Massimo); T. Paus (Tomas); Z. Pausova (Zdenka); B.W.J.H. Penninx (Brenda); Pike, G.B. (G. Bruce); S.G. Potkin (Steven); B.M. Psaty (Bruce); S. Reppermund; M. Rietschel (M.); J.L. Roffman (Joshua); N. Seiferth (Nina); J.I. Rotter (Jerome I.); M. Ryten (Mina); Sacco, R.L. (Ralph L.); P.S. Sachdev (Perminder); A.J. Saykin (Andrew); R. Schmidt (Reinhold); Schmidt, H. (Helena); C.J. Schofield (Christopher); Sigursson, S. (Sigurdur); Simmons, A. (Andrew); A. Singleton (Andrew); S.M. Sisodiya (Sanjay); Smith, C. (Colin); J.W. Smoller; H. Soininen (H.); V.M. Steen (Vidar); D.J. Stott (David J.); J. Sussmann (Jessika); A. Thalamuthu (Anbupalam); A.W. Toga (Arthur W.); B. Traynor (Bryan); J.C. Troncoso (Juan); M. Tsolaki (Magda); C. Tzourio (Christophe); A.G. Uitterlinden (André); Hernández, M.C.V. (Maria C. Valdés); M.P. van der Brug (Marcel); A. van der Lugt (Aad); N.J. van der Wee (Nic); N.E.M. van Haren (Neeltje E.); D. van 't Ent (Dennis); M.J.D. van Tol (Marie-José); B.N. Vardarajan (Badri); B. Vellas (Bruno); D.J. Veltman (Dick); H. Völzke (Henry); H.J. Walter (Henrik); J. Wardlaw (Joanna); A.M.J. Wassink (Annemarie); M.E. Weale (Michael); Weinberger, D.R. (Daniel R.); Weiner, M.W. (Michael W.); Wen, W. (Wei); E. Westman (Eric); T.J.H. White (Tonya); Wong, T.Y. (Tien Y.); Wright, C.B. (Clinton B.); R.H. Zielke (Ronald H.); A.B. Zonderman; N.G. Martin (Nicholas); C.M. van Duijn (Cock); M.J. Wright (Margaret); W.T. Longstreth Jr; G. Schumann (Gunter); H.J. Grabe (Hans Jörgen); B. Franke (Barbara); L.J. Launer (Lenore); S.E. Medland (Sarah Elizabeth); S. Seshadri (Sudha); P.M. Thompson (Paul); M.K. Ikram (Kamran)
2017-01-01
textabstractThe hippocampal formation is a brain structure integrally involved in episodic memory, spatial navigation, cognition and stress responsiveness. Structural abnormalities in hippocampal volume and shape are found in several common neuropsychiatric disorders. To identify the genetic underpi
Iimori, Yuki
2015-01-01
Developing the analysis in JHEP 03 (2014) 044 [arXiv:1312.1677] by the present authors et al., we clarify the relation between the Witten formulation and the Berkovits formulation of open superstring field theory at the level of the master action, namely the solution to the classical master equation in the Batalin-Vilkovisky formalism, which is the key for the path-integral quantization. We first scrutinize the reducibility structure, a detailed gauge structure containing the information about ghost string fields. Then, extending the condition for partial gauge fixing introduced in the above-mentioned paper to the sector of ghost string fields, we investigate the master action. We show that the reducibility structure and the master action under partial gauge fixing of the Berkovits formulation can be regarded as the regularized versions of those in the Witten formulation.
Rotational Crofton formulae for flagged intrinsic volumes
DEFF Research Database (Denmark)
Auneau, Jeremy Michel
, and the integration is over all sections containing the fixed point origo. Our main result is a local stereological analogue to the well-known Crofton formula. More precisely, we derive geometric formulae that relate new flagged intrinsic volumes of a set with the flagged intrinsic volumes of its sections...
Corotational formulation for 3d solids. An analysis of geometrically nonlinear foam deformation
Kaczmarczyk, Łukasz; Pearce, Chris J
2011-01-01
This paper presents theory for the Lagrange co-rotational (CR) formulation of finite elements in the geometrically nonlinear analysis of 3D structures. In this paper strains are assumed to be small while the magnitude of rotations from the reference configuration is not restricted. A new best fit rotator and consistent spin filter are derived. Lagrange CR formulation is applied with Hybrid Trefftz Stress elements, although presented methodology can be applied to arbitrary problem formulation and discretization technique, f.e. finite volume methods and lattice models, discreet element methods. Efficiency of CR formulation can be utilized in post-buckling stability analysis, damage and fracture mechanics, modelling of dynamic fragmentation of bodies made from quasi-brittle materials, solid fluid interactions and analysis of post-stressed structures, discreet body dynamics.
A new formulation to compute self-potential signals associated with ground water flow
Directory of Open Access Journals (Sweden)
A. Bolève
2007-06-01
Full Text Available The classical formulation of the coupled hydroelectrical flow in porous media is based on a linear formulation of two coupled constitutive equations for the electrical current density and the seepage velocity of the water phase and obeying Onsager's reciprocity. This formulation shows that the streaming current density is controlled by the gradient of the fluid pressure of the water phase and a streaming current coupling coefficient that depends on the so-called zeta potential. Recently a new formulation has been introduced in which the streaming current density is directly connected to the seepage velocity of the water phase and to the excess of electrical charge per unit pore volume in the porous material. The advantages of this formulation are numerous. First this new formulation is more intuitive not only in terms of constitutive equation for the generalized Ohm's law but also in specifying boundary conditions for the influence of the flow field upon the streaming potential. With the new formulation, the streaming potential coupling coefficient shows a decrease of its magnitude with permeability in agreement with published results. The new formulation is also easily extendable to non-viscous laminar flow problems (high Reynolds number ground water flow in cracks for example and to unsaturated conditions with applications to the vadose zone. We demonstrate here that this formulation is suitable to model self-potential signals in the field. We investigate infiltration of water from an agricultural ditch, vertical infiltration of water into a sinkhole, and preferential horizontal flow of ground water in a paleochannel. For the three cases reported in the present study, a good match is obtained between the finite element simulations performed with the finite element code Comsol Multiphysics 3.3 and field observations. Finally, this formulation seems also very promising for the inversion of the geometry of ground water flow from the
ROLE OF CYCLODEXTRINS IN NEW ANTIMYCOBACTERIAL FORMULATIONS
Directory of Open Access Journals (Sweden)
Veaceslav Boldescu
2014-06-01
Full Text Available This paper is dedicated to the role of cyclodextrins in new formulations for the treatment of infections with Mycobacterium tuberculosis that are in the process of design and development. Cyclodextrins play the role of solubilizing agents and promoters of the antimycobacterial substances penetration inside the mycobacterial cell. Different formulations and their advantages and disadvantages are discussed.
Digluconate and Isopropyl Alcohol Biocide Formulation
Directory of Open Access Journals (Sweden)
Barbara Conway
2012-10-01
Full Text Available Effective surface disinfection is a fundamental infection control strategy within healthcare. This study assessed the antimicrobial efficacy of novel biocide formulations comprising 5% and 2% eucalyptus oil (EO combined with 2% chlorhexidine digluconate (CHG and 70% isopropyl alcohol (IPA contained within a wipe. The efficacy of this novel antimicrobial formulation to remove and eliminate methicillin-resistant Staphylococcus aureus (MRSA, Escherichia coli and Candida albicans from steel surfaces was investigated. Adpression studies of pre-contaminated wipes were also utilised to assess their potential to induce cross-contamination between hard surfaces. Furthermore, the bactericidal nature of the EO-formulation was established in addition to time-kill. The EO-containing formulations demonstrated bactericidal antimicrobial efficacy against all microorganisms and did not induce surface cross-contamination. There was no significant difference (p < 0.05 between the 5% and 2% EO formulations in their ability to remove microorganisms from steel surfaces, however both significantly (p < 0.05 removed more than the control formulations. Microbial biofilms were eliminated within 10 min (p < 0.05 when exposed to the EO formulations. Our novel EO-formulation demonstrated rapid antimicrobial efficacy for potential disinfection and elimination of microbial biofilms from hard surfaces and may therefore be a useful adjunct to current infection control strategies currently employed within healthcare facilities.
Bioavailability of sustained-release theophylline formulations.
Bonora Regazzi, M; Rondanelli, R; Vidale, E; Cristiani, D
1983-05-01
Sustained-release formulations of theophylline as well as of other drugs are designed to effect a delayed but constant release of the active principle in the gastrointestinal tract, thus ensuring more prolonged blood level curves. This study was made to assess the bioavailability of two sustained-release microencapsulated formulations and one sustained-release Diffucaps formulation, in comparison with an equivalent dose of theophylline solution. As regards bioavailability, none of the three formulations differed significantly from the reference formulation. The blood levels at steady state were estimated on the basis of data obtained after a single-dose study. All three sustained release formulations showed good results after prolonged administration in terms of peaks and troughs. The time duration at which the theophylline plasma levels remain higher than 75% of the maximum steady-state levels, following 12-h dosing interval, was evaluated: for the sustained-release microencapsulated formulations this time duration reaches 100% of the dosing interval. A multiple-dose administration of the sustained-release formulations used in this study should guarantee almost complete time coverage, with blood levels sharply exceeding the minimum threshold level of the theophylline therapeutic range.
Preformulation and Formulation of Investigational New Drugs
1999-01-01
2000 THIS PAGE IS UNCLASSIFIED AD Award Number DAMDl7-92-C-2035 TITLE: Preformulation and Formulation of Investigational New Drugs PRINCIPAL...TITLE AND SUBTITLE 5. FUNDING NUMBERS Preformulation and Formulation of Investigational New Drugs DAMD17-92-C-2035 6. AUTHOR(S) Douglas Flanagan, Ph.D. 7
A New Resistance Formulation for Carbon Nanotubes
Directory of Open Access Journals (Sweden)
Ji-Huan He
2008-01-01
Full Text Available A new resistance formulation for carbon nanotubes is suggested using fractal approach. The new formulation is also valid for other nonmetal conductors including nerve fibers, conductive polymers, and molecular wires. Our theoretical prediction agrees well with experimental observation.
Constructing Extended Formulations from Reflection Relations
Kaibel, Volker
2010-01-01
There are many examples of optimization problems whose associated polyhedra can be described much nicer, and with way less inequalities, by projections of higher dimensional polyhedra than this would be possible in the original space. However, currently not many general tools to construct such extended formulations are available. In this paper, we develop a framework of polyhedral relations that generalizes inductive constructions of extended formulations via projections, and we particularly elaborate on the special case of reflection relations. The latter ones provide polynomial size extended formulations for several polytopes that can be constructed as convex hulls of the unions of (exponentially) many copies of an input polytope obtained via sequences of reflections at hyperplanes. We demonstrate the use of the framework by deriving small extended formulations for the G-permutahedra of all finite reflection groups G (generalizing both Goeman's extended formulation of the permutahedron of size O(n log n) an...
Inherent formulation issues of kinase inhibitors.
Herbrink, M; Schellens, J H M; Beijnen, J H; Nuijen, B
2016-10-10
The small molecular Kinase Inhibitor (smKI) drug class is very promising and rapidly expanding. All of these drugs are administered orally. The clear relationship between structure and function has led to drugs with a general low intrinsic solubility. The majority of the commercial pharmaceutical formulations of the smKIs are physical mixtures that are limited by the low drug solubility of a salt form. This class of drugs is therefore characterized by an impaired and variable bioavailability rendering them costly and their therapies suboptimal. New formulations are sparingly being reported in literature and patents. The presented data suggests that continued research into formulation design can help to develop more efficient and cost-effective smKI formulation. Moreover, it may also be of help in the future design of the formulations of new smKIs.
Subscale testing of prompt agent defeat formulations
Knott, A.; Stamatis, D.; Svingala, F.; Lightstone, J.; Miller, K.; Bensman, M.; Bohmke, M.
2017-01-01
There is a need to improve the current bioagent defeat systems with formulations that produce lower peak pressure and impulse, sustained high temperatures, and release of biocidal species for prompt defeat applications. In this work, explosive charge configurations similar to fuel-air explosives were detonated in a semi-enclosed chamber configuration. Binder type and fuel-to-oxidizer ratios were varied to observe the effects on combustion performance. Thermocouple measurements and high-speed video were used to monitor the combustion of the dispersed formulation. The down-selected formulations were then tested in a sub-scale vented agent defeat system developed to evaluate performance of formulations against aerosolized Bacillus thuringiensis (Bt) spores. Diagnostics including thermocouples and piezoelectric pressure gauges were utilized to characterize the detonation event. Biological sampling with surface coupons, liquid impingement, and filters of the post detonation environment were utilized to determine spore survivability and to rank the relative effectiveness of each formulation.