WorldWideScience

Sample records for volume bone tissue

  1. Troglitazone treatment increases bone marrow adipose tissue volume but does not affect trabecular bone volume in mice

    DEFF Research Database (Denmark)

    Erikstrup, Lise Tornvig; Mosekilde, Leif; Justesen, J;

    2001-01-01

    proliferator activated receptor-gamma (PPARgamma). Histomorphometric analysis of proximal tibia was performed in order to quantitate the amount of trabecular bone volume per total volume (BV/TV %), adipose tissue volume per total volume (AV/TV %), and hematopoietic marrow volume per total volume (HV...

  2. A perfusion bioreactor system capable of producing clinically relevant volumes of tissue-engineered bone: in vivo bone formation showing proof of concept

    NARCIS (Netherlands)

    Janssen, F.W.; Oostra, Jaap; van Oorschot, Arie; van Blitterswijk, Clemens

    2006-01-01

    In an effort to produce clinically relevant volumes of tissue-engineered bone products, we report a direct perfusion bioreactor system. Goat bone marrow stromal cells (GBMSCs) were dynamically seeded and proliferated in this system in relevant volumes (10 cc) of small sized macroporous biphasic

  3. Treatment Outcomes and Prognostic Factors of Pulmonary Metastasectomy for Bone and Soft Tissue Sarcoma: a High Volume Academic Institution Experience

    Directory of Open Access Journals (Sweden)

    Xiaozheng KANG

    2016-05-01

    Full Text Available Background and objective The bone and soft tissue sarcoma can metastasize to distant sites, most commonly the lungs. Some cases can be cured by radical metastasectomy, but its role, indication and prognostic factors remains controversial. The rarity of the disease combined with the diverse number of subtypes can make bone and soft tissue sarcomas very difficult to study. There are few randomized control studies or international high volume results, and such reports in China are seldom seen. The aim of this study is to investigate surgical treatment outcomes and prognostic factors of pulmonary metastatic bone and soft tissue sarcoma patients. Methods From January 2007 to December 2015, patients with bone and soft tissue sarcoma who underwent multimodality therapy including definitive surgery for the primary lesion and at least one pulmonary metastasectomy were enrolled in the retrospective study. All the relevant clinical variables were collected, and then statistically analyzed and interpreted with the aid of univariate and multivariate Cox proportional hazard regression method. Results Totally 155 pulmonary metastasectomies in 144 patients were analyzed. Incomplete R0 resection, a less than 1-year interval from a previous surgery, more than three detected nodules; and the summed maximum diameter of more than 45 mm for pulmonary metastases were independent prognostic indicators by multivariate analysis. Conclusion We suggest that metastatic bone and soft tissue sarcoma patients can benefit most from aggressive surgical intervention of pulmonary metastasectomy. Its prognostic factors include R0 resection, a longer interval from a previous surgery, smaller total number and total size of pulmonary metastases.

  4. Adipocyte tissue volume in bone marrow is increased with aging and in patients with osteoporosis

    DEFF Research Database (Denmark)

    Justesen, J; Dokkedahl, Karin Stenderup; Ebbesen, E N

    2001-01-01

    Aging of the human skeleton is characterized by decreased bone formation and bone mass and these changes are more pronounced in patients with osteoporosis. As osteoblasts and adipocytes share a common precursor cell in the bone marrow, we hypothesized that decreased bone formation observed during...

  5. Adipocyte tissue volume in bone marrow is increased with aging and in patients with osteoporosis

    DEFF Research Database (Denmark)

    Justesen, J; Dokkedahl, Karin Stenderup; Ebbesen, E N

    2001-01-01

    Aging of the human skeleton is characterized by decreased bone formation and bone mass and these changes are more pronounced in patients with osteoporosis. As osteoblasts and adipocytes share a common precursor cell in the bone marrow, we hypothesized that decreased bone formation observed during...... aging and in patients with osteoporosis is the result of enhanced adipognesis versus osteoblastogenesis from precursor cells in the bone marrow. Thus, we examined iliac crest bone biopsies obtained from 53 healthy normal individuals (age 30-100) and 26 patients with osteoporosis (age 52-92). Adipose.......s., n = 52) was detectable. Compared with age-matched controls, patients with osteoporosis exhibited an increased AV/TV (P osteoporosis an enhanced...

  6. A novel porous bioceramics scaffold by accumulating hydroxyapatite spherulites for large bone tissue engineering in vivo. II. Construct large volume of bone grafts.

    Science.gov (United States)

    Zhi, Wei; Zhang, Cong; Duan, Ke; Li, Xiaohong; Qu, Shuxin; Wang, Jianxin; Zhu, Zhuoli; Huang, Peng; Xia, Tian; Liao, Ga; Weng, Jie

    2014-08-01

    In vivo engineering of bone autografts using bioceramic scaffolds with appropriate porous structures is a potential approach to prepare autologous bone grafts for the repair of critical-sized bone defects. This study investigated the evolutionary process of osteogenesis, angiogenesis, and compressive strength of bioceramic scaffolds implanted in two non-osseous sites of dogs: the abdominal cavity and the dorsal muscle. Hydroxyapatite (HA) sphere-accumulated scaffolds with controlled porous structures were prepared and placed in the two sites for up to 6 months. Analyses of retrieved scaffolds found that osteogenesis and angiogenesis were faster in scaffolds implanted in dorsal muscles compared with those placed in abdominal cavities. The abdominal cavity, however, can accommodate larger bone grafts with designed shape. Analyses of scaffolds implanted in abdominal cavities [an environment of a low mesenchymal stem cell (MSC) density] further demonstrated that angiogenesis play critical roles during osteogenesis in the scaffolds, presumably by supplying progenitor cells and/or MSCs as seed cells. This study also examined the relationship between the volume of bone grafts and the physiological environment of in vivo bioreactor. These results provide basic information for the selection of appropriate implanting sites and culture time required to engineer autologous bone grafts for the clinical bone defect repair. Based on these positive results, a pilot study has applied the grafts constructed in canine abdominal cavity to repair segmental bone defect in load-bearing sites (limbs).

  7. Percutaneous bone cement refixation of aseptically loose hip prostheses: the effect of interface tissue removal on injected cement volumes

    Energy Technology Data Exchange (ETDEWEB)

    Malan, Daniel F. [Leiden University Medical Center, Department of Orthopaedics, Leiden (Netherlands); Delft University of Technology, Department of Intelligent Systems, Delft (Netherlands); Valstar, Edward R. [Leiden University Medical Center, Department of Orthopaedics, Leiden (Netherlands); Delft University of Technology, Department of Biomechanical Engineering, Delft (Netherlands); Nelissen, Rob G.H.H. [Leiden University Medical Center, Department of Orthopaedics, Leiden (Netherlands)

    2014-11-15

    To quantify whether injected cement volumes differed between two groups of patients who underwent experimental minimally invasive percutaneous cement injection procedures to stabilize aseptically loose hip prostheses. One patient group was preoperatively treated using gene-directed enzyme prodrug therapy to remove fibrous interface tissue, while the other group received no preoperative treatment. It was hypothesized that cement penetration may have been inhibited by the presence of fibrous interface tissue in periprosthetic lesions. We analyzed 17 patients (14 female, 3 male, ages 72-91, ASA categories 2-4) who were treated at our institution. Osteolytic lesions and injected cement were manually delineated using 3D CT image segmentation, and the deposition of injected cement was quantified. Patients who underwent preoperative gene-directed enzyme therapy to remove fibrous tissue exhibited larger injected cement volumes than those who did not. The observed median increase in injected cement volume was 6.8 ml. Higher cement leakage volumes were also observed for this group. We conclude that prior removal of periprosthetic fibrous interface tissue may enable better cement flow and penetration. This might lead to better refixation of aseptically loosened prostheses. (orig.)

  8. Distribution Principle of Bone Tissue

    CERN Document Server

    Fan, Yifang; Fan, Yubo; Xu, Zongxiang; Li, Zhiyu

    2009-01-01

    Using the analytic and experimental techniques we present an exploratory study of the mass distribution features of the high coincidence of centre of mass of heterogeneous bone tissue in vivo and its centroid of geometry position. A geometric concept of the average distribution radius of bone issue is proposed and functional relation of this geometric distribution feature between the partition density and its relative tissue average distribution radius is observed. Based upon the mass distribution feature, our results suggest a relative distance assessment index between the center of mass of cortical bone and the bone center of mass and establish a bone strength equation. Analysing the data of human foot in vivo, we notice that the mass and geometric distribution laws have expanded the connotation of Wolff's law, which implies a leap towards the quantitative description of bone strength. We finally conclude that this will not only make a positive contribution to help assess osteoporosis, but will also provide...

  9. Prevascularized bone tissue engineering

    NARCIS (Netherlands)

    Rouwkema, Jeroen

    2007-01-01

    Tissue engineering has been an active field of research for several decades now. However, the number of successful clinical applications in the field of tissue engineering are limited and can mainly be found in thin or avascular tissues like skin and cartilage. One of the current limitations of tiss

  10. Collagen for bone tissue regeneration.

    Science.gov (United States)

    Ferreira, Ana Marina; Gentile, Piergiorgio; Chiono, Valeria; Ciardelli, Gianluca

    2012-09-01

    In the last decades, increased knowledge about the organization, structure and properties of collagen (particularly concerning interactions between cells and collagen-based materials) has inspired scientists and engineers to design innovative collagen-based biomaterials and to develop novel tissue-engineering products. The design of resorbable collagen-based medical implants requires understanding the tissue/organ anatomy and biological function as well as the role of collagen's physicochemical properties and structure in tissue/organ regeneration. Bone is a complex tissue that plays a critical role in diverse metabolic processes mediated by calcium delivery as well as in hematopoiesis whilst maintaining skeleton strength. A wide variety of collagen-based scaffolds have been proposed for different tissue engineering applications. These scaffolds are designed to promote a biological response, such as cell interaction, and to work as artificial biomimetic extracellular matrices that guide tissue regeneration. This paper critically reviews the current understanding of the complex hierarchical structure and properties of native collagen molecules, and describes the scientific challenge of manufacturing collagen-based materials with suitable properties and shapes for specific biomedical applications, with special emphasis on bone tissue engineering. The analysis of the state of the art in the field reveals the presence of innovative techniques for scaffold and material manufacturing that are currently opening the way to the preparation of biomimetic substrates that modulate cell interaction for improved substitution, restoration, retention or enhancement of bone tissue function.

  11. Nanotechnology in bone tissue engineering.

    Science.gov (United States)

    Walmsley, Graham G; McArdle, Adrian; Tevlin, Ruth; Momeni, Arash; Atashroo, David; Hu, Michael S; Feroze, Abdullah H; Wong, Victor W; Lorenz, Peter H; Longaker, Michael T; Wan, Derrick C

    2015-07-01

    Nanotechnology represents a major frontier with potential to significantly advance the field of bone tissue engineering. Current limitations in regenerative strategies include impaired cellular proliferation and differentiation, insufficient mechanical strength of scaffolds, and inadequate production of extrinsic factors necessary for efficient osteogenesis. Here we review several major areas of research in nanotechnology with potential implications in bone regeneration: 1) nanoparticle-based methods for delivery of bioactive molecules, growth factors, and genetic material, 2) nanoparticle-mediated cell labeling and targeting, and 3) nano-based scaffold construction and modification to enhance physicochemical interactions, biocompatibility, mechanical stability, and cellular attachment/survival. As these technologies continue to evolve, ultimate translation to the clinical environment may allow for improved therapeutic outcomes in patients with large bone deficits and osteodegenerative diseases. Traditionally, the reconstruction of bony defects has relied on the use of bone grafts. With advances in nanotechnology, there has been significant development of synthetic biomaterials. In this article, the authors provided a comprehensive review on current research in nanoparticle-based therapies for bone tissue engineering, which should be useful reading for clinicians as well as researchers in this field. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Soft tissue aneurysmal bone cyst

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X.L.; Gielen, J.L.; Delrue, F.; De Schepper, A.M.A. [Department of Radiology, Universitair Ziekenhuis Antwerpen (University of Antwerp), Wilrijkstraat 10, 2650, Edegem (Belgium); Salgado, R. [Department of Pathology, Universitair Ziekenhuis Antwerpen (University of Antwerp), Wilrijkstraat 10, 2650, Edegem (Belgium)

    2004-08-01

    A soft tissue aneurysmal bone cyst located in the right gluteus medius of a 21-year-old man is reported. On conventional radiography, the lesion demonstrated a spherically trabeculated mass with a calcific rim. On CT scan, it showed a well-organized peripheral calcification resembling a myositis ossificans. On MRI, it presented as a multilocular, cystic lesion with fluid-fluid levels. The lesion had no solid components except for intralesional septa. Although findings on imaging and histology were identical to those described in classical aneurysmal bone cyst, diagnosis was delayed because of lack of knowledge of this entity and its resemblance to the more familiar post-traumatic heterotopic ossification (myositis ossificans). (orig.)

  13. A new biological approach to guided bone and tissue regeneration.

    Science.gov (United States)

    Montanari, Marco; Callea, Michele; Yavuz, Izzet; Maglione, Michele

    2013-04-09

    The purpose of this study was to determine the potential of platelet-rich fibrin (PRF) membranes used for guided bone and tissue regeneration. A patient with insufficient alveolar ridge width in aesthetic zone was enrolled. The patient's blood was centrifuged to obtain PRF membranes. Autogenous bone graft was mixed with bovine hydroxyapatite, PRF particles and applied to fill the defect. Five PRF membranes were placed over the bone mix. After 4 months a cone-beam CT was performed to evaluate bone regeneration. The use of PRF as cover membrane permitted a rapid epithelisation and represented an effective barrier versus epithelial cell penetration. After 4 months the site appeared precociously healed and the bone volume increased. This new approach represents a predictable method of augmenting deficient alveolar ridges. Guided bone regeneration with PRF showed limitation compared with guided bone regeneration using collagen membrane in terms of bone gain. The association of collagen membrane and PRF could be a good association.

  14. Bone Tissue Engineering: Recent Advances and Challenges

    Science.gov (United States)

    Amini, Ami R.; Laurencin, Cato T.; Nukavarapu, Syam P.

    2013-01-01

    The worldwide incidence of bone disorders and conditions has trended steeply upward and is expected to double by 2020, especially in populations where aging is coupled with increased obesity and poor physical activity. Engineered bone tissue has been viewed as a potential alternative to the conventional use of bone grafts, due to their limitless supply and no disease transmission. However, bone tissue engineering practices have not proceeded to clinical practice due to several limitations or challenges. Bone tissue engineering aims to induce new functional bone regeneration via the synergistic combination of biomaterials, cells, and factor therapy. In this review, we discuss the fundamentals of bone tissue engineering, highlighting the current state of this field. Further, we review the recent advances of biomaterial and cell-based research, as well as approaches used to enhance bone regeneration. Specifically, we discuss widely investigated biomaterial scaffolds, micro- and nano-structural properties of these scaffolds, and the incorporation of biomimetic properties and/or growth factors. In addition, we examine various cellular approaches, including the use of mesenchymal stem cells (MSCs), embryonic stem cells (ESCs), adult stem cells, induced pluripotent stem cells (iPSCs), and platelet-rich plasma (PRP), and their clinical application strengths and limitations. We conclude by overviewing the challenges that face the bone tissue engineering field, such as the lack of sufficient vascularization at the defect site, and the research aimed at functional bone tissue engineering. These challenges will drive future research in the field. PMID:23339648

  15. Stem cells in bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Seong, Jeong Min [Department of Preventive and Social Dentistry and Institute of Oral Biology, College of Dentistry, Kyung Hee University, Seoul 130-701 (Korea, Republic of); Kim, Byung-Chul; Park, Jae-Hong; Kwon, Il Keun; Hwang, Yu-Shik [Department of Maxillofacial Biomedical Engineering and Institute of Oral Biology, College of Dentistry, Kyung Hee University, Seoul 130-701 (Korea, Republic of); Mantalaris, Anathathios, E-mail: yshwang@khu.ac.k [Department of Chemical Engineering, Imperial College London, South Kensington Campus, London SW7 2AZ (United Kingdom)

    2010-12-15

    Bone tissue engineering has been one of the most promising areas of research, providing a potential clinical application to cure bone defects. Recently, various stem cells including embryonic stem cells (ESCs), bone marrow-derived mesenchymal stem cells (BM-MSCs), umbilical cord blood-derived mesenchymal stem cells (UCB-MSCs), adipose tissue-derived stem cells (ADSCs), muscle-derived stem cells (MDSCs) and dental pulp stem cells (DPSCs) have received extensive attention in the field of bone tissue engineering due to their distinct biological capability to differentiate into osteogenic lineages. The application of these stem cells to bone tissue engineering requires inducing in vitro differentiation of these cells into bone forming cells, osteoblasts. For this purpose, efficient in vitro differentiation towards osteogenic lineage requires the development of well-defined and proficient protocols. This would reduce the likelihood of spontaneous differentiation into divergent lineages and increase the available cell source for application to bone tissue engineering therapies. This review provides a critical examination of the various experimental strategies that could be used to direct the differentiation of ESC, BM-MSC, UCB-MSC, ADSC, MDSC and DPSC towards osteogenic lineages and their potential applications in tissue engineering, particularly in the regeneration of bone. (topical review)

  16. Volume-Based F-18 FDG PET/CT Imaging Markers Provide Supplemental Prognostic Information to Histologic Grading in Patients With High-Grade Bone or Soft Tissue Sarcoma

    DEFF Research Database (Denmark)

    Andersen, Kim Francis; Fuglo, Hanna Maria; Rasmussen, Sine Hvid;

    2015-01-01

    The aim of the study is to assess the prognostic value of different volume-based calculations of tumor metabolic activity in the initial assessment of patients with high-grade bone sarcomas (BS) and soft tissue sarcomas (STS) using F-18 FDG PET/CT.A single-site, retrospective study from 2002...... to 2012 including 92 patients with histologically verified high-grade BS (N = 37) or STS (N = 55). All patients underwent a pretreatment F-18 FDG PET/CT scan. Clinical data were registered. Measurements of the accuracy of metabolic tumor volume with a preset threshold of 40% of the maximum standardized.......05, HR 3.37 [95% CI 1.02-11.11]). No significant results were demonstrated for MTV40%.Volume-based F-18 FDG PET/CT imaging markers in terms of pretreatment estimation of TLG provide supplemental prognostic information to histologic grading, with significant independent properties for prediction...

  17. Localized tissue mineralization regulated by bone remodelling: A computational approach

    Science.gov (United States)

    Decco, Oscar; Adams, George; Cook, Richard B.; García Aznar, José Manuel

    2017-01-01

    Bone is a living tissue whose main mechanical function is to provide stiffness, strength and protection to the body. Both stiffness and strength depend on the mineralization of the organic matrix, which is constantly being remodelled by the coordinated action of the bone multicellular units (BMUs). Due to the dynamics of both remodelling and mineralization, each sample of bone is composed of structural units (osteons in cortical and packets in cancellous bone) created at different times, therefore presenting different levels of mineral content. In this work, a computational model is used to understand the feedback between the remodelling and the mineralization processes under different load conditions and bone porosities. This model considers that osteoclasts primarily resorb those parts of bone closer to the surface, which are younger and less mineralized than older inner ones. Under equilibrium loads, results show that bone volumes with both the highest and the lowest levels of porosity (cancellous and cortical respectively) tend to develop higher levels of mineral content compared to volumes with intermediate porosity, thus presenting higher material densities. In good agreement with recent experimental measurements, a boomerang-like pattern emerges when plotting apparent density at the tissue level versus material density at the bone material level. Overload and disuse states are studied too, resulting in a translation of the apparent–material density curve. Numerical results are discussed pointing to potential clinical applications. PMID:28306746

  18. Towards improved scaffolds for bone tissue engineering

    NARCIS (Netherlands)

    Nandakumar, A.

    2012-01-01

    Tissue engineering aims to restore, maintain or improve tissue function of damaged tissues. In a classical set-up, a scaffold functions as a supporting structure and a carrier for growth factors and/or cells. Human mesenchymal stromal cells (hMSCs) have the ability to differentiate into bone, cartil

  19. Nanostructured scaffolds for bone tissue engineering.

    Science.gov (United States)

    Li, Xiaoming; Wang, Lu; Fan, Yubo; Feng, Qingling; Cui, Fu-Zhai; Watari, Fumio

    2013-08-01

    It has been demonstrated that nanostructured materials, compared with conventional materials, may promote greater amounts of specific protein interactions, thereby more efficiently stimulating new bone formation. It has also been indicated that, when features or ingredients of scaffolds are nanoscaled, a variety of interactions can be stimulated at the cellular level. Some of those interactions induce favorable cellular functions while others may leads to toxicity. This review presents the mechanism of interactions between nanoscaled materials and cells and focuses on the current research status of nanostructured scaffolds for bone tissue engineering. Firstly, the main requirements for bone tissue engineering scaffolds were discussed. Then, the mechanism by which nanoscaled materials promote new bone formation was explained, following which the current research status of main types of nanostructured scaffolds for bone tissue engineering was reviewed and discussed. Copyright © 2013 Wiley Periodicals, Inc.

  20. The materials used in bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Tereshchenko, V. P., E-mail: tervp@ngs.ru; Kirilova, I. A.; Sadovoy, M. A.; Larionov, P. M. [Novosibirsk Research Institute of Traumatology and Orthopedics n.a. Ya.L. Tsivyan, Novosibirsk (Russian Federation)

    2015-11-17

    Bone tissue engineering looking for an alternative solution to the problem of skeletal injuries. The method is based on the creation of tissue engineered bone tissue equivalent with stem cells, osteogenic factors, and scaffolds - the carriers of these cells. For production of tissue engineered bone equivalent is advisable to create scaffolds similar in composition to natural extracellular matrix of the bone. This will provide optimal conditions for the cells, and produce favorable physico-mechanical properties of the final construction. This review article gives an analysis of the most promising materials for the manufacture of cell scaffolds. Biodegradable synthetic polymers are the basis for the scaffold, but it alone cannot provide adequate physical and mechanical properties of the construction, and favorable conditions for the cells. Addition of natural polymers improves the strength characteristics and bioactivity of constructions. Of the inorganic compounds, to create cell scaffolds the most widely used calcium phosphates, which give the structure adequate stiffness and significantly increase its osteoinductive capacity. Signaling molecules do not affect the physico-mechanical properties of the scaffold, but beneficial effect is on the processes of adhesion, proliferation and differentiation of cells. Biodegradation of the materials will help to fulfill the main task of bone tissue engineering - the ability to replace synthetic construct by natural tissues that will restore the original anatomical integrity of the bone.

  1. Bone tissue engineering: from bench to bedside

    Directory of Open Access Journals (Sweden)

    Maria A. Woodruff

    2012-10-01

    Full Text Available The drive to develop bone grafts for the filling of major gaps in the skeletal structure has led to a major research thrust towards developing biomaterials for bone engineering. Unfortunately, from a clinical perspective, the promise of bone tissue engineering which was so vibrant a decade ago has so far failed to deliver the anticipated results of becoming a routine therapeutic application in reconstructive surgery. Here we describe our bench to bedside concept, the first clinical results and a detailed analysis of long-term bone regeneration studies in preclinical animal models, exploiting methods of micro- and nano analysis of biodegradable composite scaffolds.

  2. Orthopaedic tissue engineering and bone regeneration.

    Science.gov (United States)

    Dickson, Glenn; Buchanan, Fraser; Marsh, David; Harkin-Jones, Eileen; Little, Uel; McCaigue, Mervyn

    2007-01-01

    Orthopaedic tissue engineering combines the application of scaffold materials, cells and the release of growth factors. It has been described as the science of persuading the body to reconstitute or repair tissues that have failed to regenerate or heal spontaneously. In the case of bone regeneration 3-D scaffolds are used as a framework to guide tissue regeneration. Mesenchymal cells obtained from the patient via biopsy are grown on biomaterials in vitro and then implanted at a desired site in the patient's body. Medical implants that encourage natural tissue regeneration are generally considered more desirable than metallic implants that may need to be removed by subsequent intervention. Numerous polymeric materials, from natural and artificial sources, are under investigation as substitutes for skeletal elements such as cartilage and bone. For bone regeneration, cells (obtained mainly from bone marrow aspirate or as primary cell outgrowths from bone biopsies) can be combined with biodegradable polymeric materials and/or ceramics and absorbed growth factors so that osteoinduction is facilitated together with osteoconduction; through the creation of bioactive rather than bioinert scaffold constructs. Relatively rapid biodegradation enables advantageous filling with natural tissue while loss of polymer strength before mass is disadvantageous. Innovative solutions are required to address this and other issues such as the biocompatibility of material surfaces and the use of appropriate scaffold topography and porosity to influence bone cell gene expression.

  3. Nanostructured Biomaterials for Tissue Engineered Bone Tissue Reconstruction

    Directory of Open Access Journals (Sweden)

    Bressan Eriberto

    2012-01-01

    Full Text Available Bone tissue engineering strategies are emerging as attractive alternatives to autografts and allografts in bone tissue reconstruction, in particular thanks to their association with nanotechnologies. Nanostructured biomaterials, indeed, mimic the extracellular matrix (ECM of the natural bone, creating an artificial microenvironment that promotes cell adhesion, proliferation and differentiation. At the same time, the possibility to easily isolate mesenchymal stem cells (MSCs from different adult tissues together with their multi-lineage differentiation potential makes them an interesting tool in the field of bone tissue engineering. This review gives an overview of the most promising nanostructured biomaterials, used alone or in combination with MSCs, which could in future be employed as bone substitutes. Recent works indicate that composite scaffolds made of ceramics/metals or ceramics/polymers are undoubtedly more effective than the single counterparts in terms of osteoconductivity, osteogenicity and osteoinductivity. A better understanding of the interactions between MSCs and nanostructured biomaterials will surely contribute to the progress of bone tissue engineering.

  4. Microgravity Stress: Bone and Connective Tissue.

    Science.gov (United States)

    Bloomfield, Susan A; Martinez, Daniel A; Boudreaux, Ramon D; Mantri, Anita V

    2016-03-15

    The major alterations in bone and the dense connective tissues in humans and animals exposed to microgravity illustrate the dependency of these tissues' function on normal gravitational loading. Whether these alterations depend solely on the reduced mechanical loading of zero g or are compounded by fluid shifts, altered tissue blood flow, radiation exposure, and altered nutritional status is not yet well defined. Changes in the dense connective tissues and intervertebral disks are generally smaller in magnitude but occur more rapidly than those in mineralized bone with transitions to 0 g and during recovery once back to the loading provided by 1 g conditions. However, joint injuries are projected to occur much more often than the more catastrophic bone fracture during exploration class missions, so protecting the integrity of both tissues is important. This review focuses on the research performed over the last 20 years in humans and animals exposed to actual spaceflight, as well as on knowledge gained from pertinent ground-based models such as bed rest in humans and hindlimb unloading in rodents. Significant progress has been made in our understanding of the mechanisms for alterations in bone and connective tissues with exposure to microgravity, but intriguing questions remain to be solved, particularly with reference to biomedical risks associated with prolonged exploration missions.

  5. Bone tissue engineering using 3D printing

    Directory of Open Access Journals (Sweden)

    Susmita Bose

    2013-12-01

    Full Text Available With the advent of additive manufacturing technologies in the mid 1980s, many applications benefited from the faster processing of products without the need for specific tooling or dies. However, the application of such techniques in the area of biomedical devices has been slow due to the stringent performance criteria and concerns related to reproducibility and part quality, when new technologies are in their infancy. However, the use of additive manufacturing technologies in bone tissue engineering has been growing in recent years. Among the different technology options, three dimensional printing (3DP is becoming popular due to the ability to directly print porous scaffolds with designed shape, controlled chemistry and interconnected porosity. Some of these inorganic scaffolds are biodegradable and have proven ideal for bone tissue engineering, sometimes even with site specific growth factor/drug delivery abilities. This review article focuses on recent advances in 3D printed bone tissue engineering scaffolds along with current challenges and future directions.

  6. Interactions between muscle tissues and bone metabolism.

    Science.gov (United States)

    Kawao, Naoyuki; Kaji, Hiroshi

    2015-05-01

    Sarcopenia and osteoporosis have recently been noted for their relationship with locomotive syndrome and increased number of older people. Sarcopenia is defined by decreased muscle mass and impaired muscle function, which may be associated with frailty. Several clinical data have indicated that increased muscle mass is related to increased bone mass and reduced fracture risk. Genetic, endocrine and mechanical factors as well as inflammatory and nutritional states concurrently affect muscle tissues and bone metabolism. Several genes, including myostatin and α-actinin 3, have been shown in a genome-wide association study (GWAS) to be associated with both sarcopenia and osteoporosis. Vitamin D, growth hormone and testosterone as well as pathological disorders, such as an excess in glucocorticoid and diabetes, affect both muscle and bone. Basic and clinical research of bone metabolism and muscle biology suggests that bone interacts with skeletal muscle via signaling from local and humoral factors in addition to their musculoskeletal function. However, the physiological and pathological mechanisms related to muscle and bone interactions remain unclear. We found that Tmem119 may play a critical role in the commitment of myoprogenitor cells to the osteoblast lineage. We also reported that osteoglycin and FAM5C might be muscle-derived humoral osteogenic factors. Other factors, including myostatin, osteonectin, insulin-like growth factor I, irisin and osteocalcin, may be associated with the interactions between muscle tissues and bone metabolism. © 2014 Wiley Periodicals, Inc.

  7. Improved repair of bone defects with prevascularized tissue-engineered bones constructed in a perfusion bioreactor.

    Science.gov (United States)

    Li, De-Qiang; Li, Ming; Liu, Pei-Lai; Zhang, Yuan-Kai; Lu, Jian-Xi; Li, Jian-Min

    2014-10-01

    Vascularization of tissue-engineered bones is critical to achieving satisfactory repair of bone defects. The authors investigated the use of prevascularized tissue-engineered bone for repairing bone defects. The new bone was greater in the prevascularized group than in the non-vascularized group, indicating that prevascularized tissue-engineered bone improves the repair of bone defects. [Orthopedics. 2014; 37(10):685-690.].

  8. Cell Mechanisms of Bone Tissue Loss Under Space Flight Conditions

    Science.gov (United States)

    Rodionova, Natalia

    Investigations on the space biosatellites has shown that the bone skeleton is one of the most im-portant targets of the effect space flight factors on the organism. Bone tissue cells were studied by electron microscopy in biosamples of rats' long bones flown on the board american station "SLS-2" and in experiments with modelling of microgravity ("tail suspension" method) with using autoradiography. The analysis of data permits to suppose that the processes of remod-eling in bone tissue at microgravity include the following succession of cell-to-cell interactions. Osteocytes as mechanosensory cells are first who respond to a changing "mechanical field". The next stage is intensification of osteolytic processes in osteocytes, leading to a volume en-largement of the osteocytic lacunae and removal of the "excess bone". Then mechanical signals have been transmitted through a system of canals and processes of the osteocytic syncitium to certain superficial bone zones and are perceived by osteoblasts and bone-lining cells (superficial osteocytes), as well as by the bone-marrow stromal cells. The sensitivity of stromal cells, pre-osteoblasts and osteoblasts, under microgravity was shown in a number of works. As a response to microgravity, the system of stromal cells -preosteoblasts -osteoblasts displays retardation of proliferation, differentiation and specific functions of osteogenetic cells. This is supported by the 3H-thymidine studies of the dynamics of differentiation of osteogenetic cells in remodeling zones. But unloading is not adequate and in part of the osteocytes are apoptotic changes as shown by our electron microscopic investigations. An osteocytic apoptosis can play the role in attraction the osteoclasts and in regulation of bone remodeling. The apoptotic bodies with a liquid flow through a system of canals are transferred to the bone surface, where they fulfil the role of haemoattractants for monocytes come here and form osteoclasts. The osteoclasts destroy

  9. Composite Scaffolds for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Min Wang

    2006-01-01

    Full Text Available Biomaterial and scaffold development underpins the advancement of tissue engineering. Traditional scaffolds based on biodegradable polymers such as poly(lactic acid and poly(lactic acid-co-glycolic acid are weak and non-osteoconductive. For bone tissue engineering, polymer-based composite scaffolds containing bioceramics such as hydroxyapatite can be produced and used. The bioceramics can be either incorporated in the scaffolds as a dispersed secondary phase or form a thin coating on the pore surface of polymer scaffolds. This bioceramic phase renders the scaffolds bioactive and also strengthens the scaffolds. There are a number of methods that can be used to produce bioceramic-polymer composite scaffolds. This paper gives an overview of our efforts in developing composite scaffolds for bone tissue engineering.

  10. Bioresorbable and nonresorbable polymers for bone tissue engineering.

    Science.gov (United States)

    Girones Molera, Jordi; Mendez, José Alberto; San Roman, Julio

    2012-01-01

    In recent years, bone tissue engineering has emerged as one of the main research areas in the field of regenerative biomedicine. Frequency and relevance age-related diseases, such as healing and regeneration of bone tissues, are rising due to increasing life expectancy. Even though bone tissue has excellent self-regeneration ability, when bone defects exceed a critical size, impaired bone formation can occur and surgical intervention becomes mandatory. Bone tissue engineering represents an alternative approach to conventional bone transplants. The main aim of tissue engineering is to repair, regenerate or reconstruct damaged or degenerative tissue. This review presents an overview on the main materials, techniques and strategies in the field of bone tissue engineering. Whilst presenting some reviews recently published that deepen on each of the sections of the paper, this review article aims to present some of the most relevant advances, both in terms of new materials and strategies, currently being developed for bone repair and regeneration.

  11. [Scaffold-based Bone Tissue Engineering].

    Science.gov (United States)

    Holzapfel, B M; Rudert, M; Hutmacher, D W

    2017-08-01

    Tissue engineering provides the possibility of regenerating damaged or lost osseous structures without the need for permanent implants. Within this context, biodegradable and bioresorbable scaffolds can provide structural and biomechanical stability until the body's own tissue can take over their function. Additive biomanufacturing makes it possible to design the scaffold's architectural characteristics to specifically guide tissue formation and regeneration. Its nano-, micro-, and macro-architectural properties can be tailored to ensure vascularization, oxygenation, nutrient supply, waste exchange, and eventually ossification not only in its periphery but also in its center, which is not in direct contact with osteogenic elements of the surrounding healthy tissue. In this article we provide an overview about our conceptual design and process of the clinical translation of scaffold-based bone tissue engineering applications.

  12. Interactions between remodelling, architecture and tissue properties in cancellous bone

    OpenAIRE

    Linden, Jacqueline

    2003-01-01

    textabstractThe aim of the research projects described in this thesis was to gain more insight in the regulation of bone remodeling and in the interactions between bone remodeling, architecture and bone tissue properties. The most striking changes during aging and osteoporosis take place in cancellous bone. For this reason, the research presented in this thesis focussed on bone remodeling in cancellous bone. We used computer modeling, finite element calculations and in vivo labeled bone speci...

  13. Alginate based scaffolds for bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Valente, J.F.A.; Valente, T.A.M. [CICS-UBI - Centro de Investigacao em Ciencias da Saude, Faculdade de Ciencias da Saude, Universidade da Beira Interior, Covilha (Portugal); Alves, P.; Ferreira, P. [CIEPQPF, Departamento de Engenharia Quimica, Universidade de Coimbra, Polo II, Pinhal de Marrocos, 3030-290 Coimbra (Portugal); Silva, A. [Centro de Ciencia e Tecnologia Aeroespaciais, Universidade da Beira Interior, Covilha (Portugal); Correia, I.J., E-mail: icorreia@ubi.pt [CICS-UBI - Centro de Investigacao em Ciencias da Saude, Faculdade de Ciencias da Saude, Universidade da Beira Interior, Covilha (Portugal)

    2012-12-01

    The design and production of scaffolds for bone tissue regeneration is yet unable to completely reproduce the native bone properties. In the present study new alginate microparticle and microfiber aggregated scaffolds were produced to be applied in this area of regenerative medicine. The scaffolds' mechanical properties were characterized by thermo mechanical assays. Their morphological characteristics were evaluated by isothermal nitrogen adsorption and scanning electron microscopy. The density of both types of scaffolds was determined by helium pycnometry and mercury intrusion porosimetry. Furthermore, scaffolds' cytotoxic profiles were evaluated in vitro by seeding human osteoblast cells in their presence. The results obtained showed that scaffolds have good mechanical and morphological properties compatible with their application as bone substitutes. Moreover, scaffold's biocompatibility was confirmed by the observation of cell adhesion and proliferation after 5 days of being seeded in their presence and by non-radioactive assays. - Highlights: Black-Right-Pointing-Pointer Design and production of scaffolds for bone tissue regeneration. Black-Right-Pointing-Pointer Microparticle and microfiber alginate scaffolds were produced through a particle aggregation technique; Black-Right-Pointing-Pointer Scaffolds' mechanically and biologically properties were characterized through in vitro studies;.

  14. Nanostructured Mesoporous Silicas for Bone Tissue Regeneration

    Directory of Open Access Journals (Sweden)

    Isabel Izquierdo-Barba

    2008-01-01

    Full Text Available The research on the development of new biomaterials that promote bone tissue regeneration is receiving great interest by the biomedical scientific community. Recent advances in nanotechnology have allowed the design of materials with nanostructure similar to that of natural bone. These materials can promote new bone formation by inducing the formation of nanocrystalline apatites analogous to the mineral phase of natural bone onto their surfaces, i.e. they are bioactive. They also stimulate osteoblast proliferation and differentiation and, therefore, accelerate the healing processes. Silica-based ordered mesoporous materials are excellent candidates to be used as third generation bioceramics that enable the adsorption and local control release of biological active agents that promote bone regeneration. This local delivery capability together with the bioactive behavior of mesoporous silicas opens up promising expectations in the bioclinical field. In this review, the last advances in nanochemistry aimed at designing and tailoring the chemical and textural properties of mesoporous silicas for biomedical applications are described. The recent developed strategies to synthesize bioactive glasses with ordered mesopore arrangements are also summarized. Finally, a deep discussion about the influence of the textural parameters and organic modification of mesoporous silicas on molecules adsorption and controlled release is performed.

  15. Immunotherapy for Bone and Soft Tissue Sarcomas

    Directory of Open Access Journals (Sweden)

    Takenori Uehara

    2015-01-01

    Full Text Available Although multimodal therapies including surgery, chemotherapy, and radiotherapy have improved clinical outcomes of patients with bone and soft tissue sarcomas, the prognosis of patients has plateaued over these 20 years. Immunotherapies have shown the effectiveness for several types of advanced tumors. Immunotherapies, such as cytokine therapies, vaccinations, and adoptive cell transfers, have also been investigated for bone and soft tissue sarcomas. Cytokine therapies with interleukin-2 or interferons have limited efficacy because of their cytotoxicities. Liposomal muramyl tripeptide phosphatidylethanolamine (L-MTP-PE, an activator of the innate immune system, has been approved as adjuvant therapeutics in combination with conventional chemotherapy in Europe, which has improved the 5-year overall survival of patients. Vaccinations and transfer of T cells transduced to express chimeric antigen receptors have shown some efficacy for sarcomas. Ipilimumab and nivolumab are monoclonal antibodies designed to inhibit immune checkpoint mechanisms. These antibodies have recently been shown to be effective for patients with melanoma and also investigated for patients with sarcomas. In this review, we provide an overview of various trials of immunotherapies for bone and soft tissue sarcomas, and discuss their potential as adjuvant therapies in combination with conventional therapies.

  16. Muscle and bone, two interconnected tissues.

    Science.gov (United States)

    Tagliaferri, Camille; Wittrant, Yohann; Davicco, Marie-Jeanne; Walrand, Stéphane; Coxam, Véronique

    2015-05-01

    As bones are levers for skeletal muscle to exert forces, both are complementary and essential for locomotion and individual autonomy. In the past decades, the idea of a bone-muscle unit has emerged. Numerous studies have confirmed this hypothesis from in utero to aging works. Space flight, bed rest as well as osteoporosis and sarcopenia experimentations have allowed to accumulate considerable evidence. Mechanical loading is a key mechanism linking both tissues with a central promoting role of physical activity. Moreover, the skeletal muscle secretome accounts various molecules that affect bone including insulin-like growth factor-1 (IGF-1), basic fibroblast growth factor (FGF-2), interleukin-6 (IL-6), IL-15, myostatin, osteoglycin (OGN), FAM5C, Tmem119 and osteoactivin. Even though studies on the potential effects of bone on muscle metabolism are sparse, few osteokines have been identified. Prostaglandin E2 (PGE2) and Wnt3a, which are secreted by osteocytes, osteocalcin (OCN) and IGF-1, which are produced by osteoblasts and sclerostin which is secreted by both cell types, might impact skeletal muscle cells. Cartilage and adipose tissue are also likely to participate to this control loop and should not be set aside. Indeed, chondrocytes are known to secrete Dickkopf-1 (DKK-1) and Indian hedgehog (Ihh) and adipocytes produce leptin, adiponectin and IL-6, which potentially modulate bone and muscle metabolisms. The understanding of this system will enable to define new levers to prevent/treat sarcopenia and osteoporosis at the same time. These strategies might include nutritional interventions and physical exercise. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. Pullulan microcarriers for bone tissue regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Aydogdu, Hazal [Middle East Technical University, Department of Biomedical Engineering, Ankara 06800 (Turkey); Keskin, Dilek [Middle East Technical University, Department of Biomedical Engineering, Ankara 06800 (Turkey); Middle East Technical University, Department of Engineering Sciences, Ankara 06800 (Turkey); METU BIOMATEN Center of Excellence in Biomaterials and Tissue Engineering, Ankara 06800 (Turkey); Baran, Erkan Turker, E-mail: erkanturkerbaran@gmail.com [METU BIOMATEN Center of Excellence in Biomaterials and Tissue Engineering, Ankara 06800 (Turkey); Tezcaner, Aysen, E-mail: tezcaner@metu.edu.tr [Middle East Technical University, Department of Biomedical Engineering, Ankara 06800 (Turkey); Middle East Technical University, Department of Engineering Sciences, Ankara 06800 (Turkey); METU BIOMATEN Center of Excellence in Biomaterials and Tissue Engineering, Ankara 06800 (Turkey)

    2016-06-01

    Microcarrier systems offer a convenient way to repair bone defects as injectable cell carriers that can be applied with small incisions owing to their small size and spherical shape. In this study, pullulan (PULL) microspheres were fabricated and characterized as cell carriers for bone tissue engineering applications. PULL was cross-linked by trisodium trimetaphosphate (STMP) to enhance the stability of the microspheres. Improved cytocompatibility was achieved by silk fibroin (SF) coating and biomimetic mineralization on the surface by incubating in simulated body fluid (SBF). X-ray diffraction (XRD), scanning electron microscopy (SEM) and fluorescent microscopy analysis confirmed biomimetic mineralization and SF coating on microspheres. The degradation analysis revealed that PULL microspheres had a slow degradation rate with 8% degradation in two weeks period indicating that the microspheres would support the formation of new bone tissue. Furthermore, the mechanical tests showed that the microspheres had a high mechanical stability that was significantly enhanced with the biomimetic mineralization. In vitro cell culture studies with SaOs-2 cells showed that cell viability was higher on SF and SBF coated microspheres on 7th day compared to PULL ones under dynamic conditions. Alkaline phosphatase activity was higher for SF coated microspheres in comparison to uncoated microspheres when dynamic culture condition was applied. The results suggest that both organic and inorganic surface modifications can be applied on PULL microspheres to prepare a biocompatible microcarrier system with suitable properties for bone tissue engineering. - Highlights: • Porous PULL microspheres were prepared as cell carrier for the first time. • Mineralization on the microspheres improved their mechanical properties. • Mineralization and SF coating enhanced cell proliferation on PULL microspheres.

  18. Effects of radiotherapy on bone tissue

    Energy Technology Data Exchange (ETDEWEB)

    Cunha, Samantha Seara da; Almeida, Darcy de [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil)]. E-mail: samanthaseara@hotmail.com; Sarmento, Viviane Almeida; Ramalho, Luciana Maria Pedreira; Freitas, Andre Carlos de [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Faculdade de Odontologia; Tavares, Maria Eulina; Souza, Jailton Caetano [Hospital Santa Izabel (HSI), Salvador, BA (Brazil); Veeck, Elaine Bauer; Costa, Nilza Pereira da [Pontificia Univ. Catolica do Rio Grande do Sul (PUCRS), Porto Alegre, RS (Brazil)

    2007-05-15

    Objective: To investigate the effects of radiotherapy on bone tissues and the accuracy of gray level measurements on radiographic images. Materials and methods: Four Wistar rats were submitted to external radiotherapy (single 3000 cGy dose) on an area of 2 cm x 2 cm of their right legs. The animals were sacrificed six weeks after radiotherapy, and both irradiated and contralateral (non-irradiated) legs were removed, dissected, evaluated for thickness, x-rayed in a standardized form and histologically processed (stained with hematoxylin-eosin and picrosirius red). The radiographs were digitalized and the gray level average was measured with the ImageTool{sup R} software. Results: The femur thickness of non-irradiated legs was greater than that of the irradiated legs (p < 0.05). Radiographically, the findings indicated a higher bone density in the non-irradiated legs, although with no statistically significant difference (p > 0.05). Histological analysis of the irradiated legs demonstrated a decrease in the number of osteocytes and Haversian canals, although with no statistically significance (p > 0.05). On the other hand, a significant increase in adipocytes was observed, resulting in a reduction of medullary tissue in the irradiated legs (p < 0.05), besides a higher osteoblastic activity in the non-irradiated legs (p < 0.05). Conclusion: Radiotherapy within the above mentioned parameters determined a decrease in activity of bone remodeling, which could be radiographically detected in the majority of the evaluated specimens. (author)

  19. Tissue-engineered bone grafts for osteoplasty in patients with cleft alveolus.

    Science.gov (United States)

    Pradel, Winnie; Lauer, Günter

    2012-11-01

    Alveolar bone grafting is an integral part of the treatment concept in cleft palate patients. As an alternative to autogenous bone, tissue-engineered grafts have found some clinical application. The aim of the present study has been to compare ossification in the cleft area using tissue-engineered grafts in a case series of patients with ossification after transplantation of autogenous spongious bone as the gold standard in alveoloplasty. Eight children with complete cleft lips and cleft palates were included in the study. In four children (group A), the cleft defect was filled with tissue-engineered bone (autogenous osteoblasts cultured on demineralized bone matrix Osteovit(®)); as control in another 4 children (group B), the alveoloplasty was performed using spongious iliac bone. Preoperative and 6 months postoperative cone-beam computed tomography was performed, and volumes of the remaining cleft defects were calculated using 3D navigation software. Wound healing was uneventful in both groups. Six months postoperatively the mean volume of the cleft was 0.55±0.24cm(3) after grafting of tissue-engineered bone (group A) and 0.59±0.23cm(3) after transplantation of autogenous spongiosa. In group A, 40.9% of the cleft defect was ossified; in the control group (group B), 36.6%. Tissue-engineered bone is a promising alternative in alveolar bone grafting and no disadvantages were observed in comparison to the gold standard. Copyright © 2012 Elsevier GmbH. All rights reserved.

  20. Quantitative plutonium microdistribution in bone tissue of vertebra from a Mayak worker.

    Science.gov (United States)

    Lyovkina, Yekaterina V; Miller, Scott C; Romanov, Sergey A; Krahenbuhl, Melinda P; Belosokhov, Maxim V

    2010-10-01

    The purpose of this study was to obtain quantitative data on plutonium microdistribution in different structural elements of human bone tissue for local dose assessment and dosimetric models validation. A sample of the thoracic vertebra was obtained from a former Mayak worker with a rather high plutonium burden. Additional information was obtained on occupational and exposure history, medical history, and measured plutonium content in organs. Plutonium was detected in bone sections from its fission tracks in polycarbonate film using neutron-induced autoradiography. Quantitative analysis of randomly selected microscopic fields on one of the autoradiographs was performed. Data included fission fragment tracks in different bone tissue and surface areas. Quantitative information on plutonium microdistribution in human bone tissue was obtained for the first time. From these data, the quantitative relationships of plutonium decays in bone volume to decays on bone surface in cortical and trabecular fractions were defined as 2.0 and 0.4, correspondingly. The measured quantitative relationship of decays in bone volume to decays on bone surface does not coincide with recommended models for the cortical bone fraction by the International Commission on Radiological Protection. Biokinetic model parameters of extrapulmonary compartments might need to be adjusted after expansion of the data set on quantitative plutonium microdistribution in other bone types in humans as well as other cases with different exposure patterns and types of plutonium.

  1. Experimental research on plasma destruction of bone tissue

    Directory of Open Access Journals (Sweden)

    Vdovin O.V.

    2012-06-01

    Full Text Available The main condition in achieving a favorable outcome is surgical treatment of patients with tumor-like diseases and benign bone tumors erosion of neoplasm within the healthy tissues. To reduce the number of recurrences the various chemical and physical methods on resection areas have been performed. The authors have proposed a new method of low temperature plasma treatment of bone tissue with the temperature of 20000°C. Exposing the plasma flow on bone tissue leads to loss of all cellular elements including neoplastic elements with preservation of the mineral bone structure. The direct correlation between the capacity of the plasma flow and intensity of bone destruction has been defined. This allows a differentiated use of plasma destruction in skeletal bones according to anatomy, size and type of bone tissue (spongy or cortical as well as patient's individual condition of the tissue

  2. Mineral density volume gradients in normal and diseased human tissues.

    Directory of Open Access Journals (Sweden)

    Sabra I Djomehri

    Full Text Available Clinical computed tomography provides a single mineral density (MD value for heterogeneous calcified tissues containing early and late stage pathologic formations. The novel aspect of this study is that, it extends current quantitative methods of mapping mineral density gradients to three dimensions, discretizes early and late mineralized stages, identifies elemental distribution in discretized volumes, and correlates measured MD with respective calcium (Ca to phosphorus (P and Ca to zinc (Zn elemental ratios. To accomplish this, MD variations identified using polychromatic radiation from a high resolution micro-computed tomography (micro-CT benchtop unit were correlated with elemental mapping obtained from a microprobe X-ray fluorescence (XRF using synchrotron monochromatic radiation. Digital segmentation of tomograms from normal and diseased tissues (N=5 per group; 40-60 year old males contained significant mineral density variations (enamel: 2820-3095 mg/cc, bone: 570-1415 mg/cc, cementum: 1240-1340 mg/cc, dentin: 1480-1590 mg/cc, cementum affected by periodontitis: 1100-1220 mg/cc, hypomineralized carious dentin: 345-1450 mg/cc, hypermineralized carious dentin: 1815-2740 mg/cc, and dental calculus: 1290-1770 mg/cc. A plausible linear correlation between segmented MD volumes and elemental ratios within these volumes was established, and Ca/P ratios for dentin (1.49, hypomineralized dentin (0.32-0.46, cementum (1.51, and bone (1.68 were observed. Furthermore, varying Ca/Zn ratios were distinguished in adapted compared to normal tissues, such as in bone (855-2765 and in cementum (595-990, highlighting Zn as an influential element in prompting observed adaptive properties. Hence, results provide insights on mineral density gradients with elemental concentrations and elemental footprints that in turn could aid in elucidating mechanistic processes for pathologic formations.

  3. Mechanotransduction by bone cells in vitro: mechanobiology of bone tissue

    NARCIS (Netherlands)

    Mullender, M.; El Haj, A.J.; Yang, Y.; van Duin, M.A.; Burger, E.H.; Klein-Nulend, J.

    2004-01-01

    Mechanical force plays an important role in the regulation of bone remodelling in intact bone and bone repair. In vitro, bone cells demonstrate a high responsiveness to mechanical stimuli. Much debate exists regarding the critical components in the load profile and whether different components, such

  4. Printing bone : the application of 3D fiber deposition for bone tissue engineering

    NARCIS (Netherlands)

    Fedorovich, N.E.

    2011-01-01

    Bone chips are used by orthopaedic surgeons for treating spinal trauma and to augment large bone defects. A potential alternative to autologous bone is regeneration of bone tissue in the lab by developing hybrid implants consisting of osteogenic (stem) cells seeded on supportive matrices.

  5. Printing bone : the application of 3D fiber deposition for bone tissue engineering

    NARCIS (Netherlands)

    Fedorovich, N.E.

    2011-01-01

    Bone chips are used by orthopaedic surgeons for treating spinal trauma and to augment large bone defects. A potential alternative to autologous bone is regeneration of bone tissue in the lab by developing hybrid implants consisting of osteogenic (stem) cells seeded on supportive matrices. Applicatio

  6. Biology of Bone Tissue: Structure, Function, and Factors That Influence Bone Cells.

    Science.gov (United States)

    Florencio-Silva, Rinaldo; Sasso, Gisela Rodrigues da Silva; Sasso-Cerri, Estela; Simões, Manuel Jesus; Cerri, Paulo Sérgio

    2015-01-01

    Bone tissue is continuously remodeled through the concerted actions of bone cells, which include bone resorption by osteoclasts and bone formation by osteoblasts, whereas osteocytes act as mechanosensors and orchestrators of the bone remodeling process. This process is under the control of local (e.g., growth factors and cytokines) and systemic (e.g., calcitonin and estrogens) factors that all together contribute for bone homeostasis. An imbalance between bone resorption and formation can result in bone diseases including osteoporosis. Recently, it has been recognized that, during bone remodeling, there are an intricate communication among bone cells. For instance, the coupling from bone resorption to bone formation is achieved by interaction between osteoclasts and osteoblasts. Moreover, osteocytes produce factors that influence osteoblast and osteoclast activities, whereas osteocyte apoptosis is followed by osteoclastic bone resorption. The increasing knowledge about the structure and functions of bone cells contributed to a better understanding of bone biology. It has been suggested that there is a complex communication between bone cells and other organs, indicating the dynamic nature of bone tissue. In this review, we discuss the current data about the structure and functions of bone cells and the factors that influence bone remodeling.

  7. Natural Polymer-Cell Bioconstructs for Bone Tissue Engineering.

    Science.gov (United States)

    Titorencu, Irina; Albu, Madalina Georgiana; Nemecz, Miruna; Jinga, Victor V

    2017-01-01

    The major goal of bone tissue engineering is to develop bioconstructs which substitute the functionality of damaged natural bone structures as much as possible if critical-sized defects occur. Scaffolds that mimic the structure and composition of bone tissue and cells play a pivotal role in bone tissue engineering applications. First, composition, properties and in vivo synthesis of bone tissue are presented for the understanding of bone formation. Second, potential sources of osteoprogenitor cells have been investigated for their capacity to induce bone repair and regeneration. Third, taking into account that the main property to qualify one scaffold as a future bioconstruct for bone tissue engineering is the biocompatibility, the assessments which prove it are reviewed in this paper. Forth, various types of natural polymer- based scaffolds consisting in proteins, polysaccharides, minerals, growth factors etc, are discussed, and interaction between scaffolds and cells which proved bone tissue engineering concept are highlighted. Finally, the future perspectives of natural polymer-based scaffolds for bone tissue engineering are considered. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  8. The Combination of Tissue Dissection and External Volume Expansion Generates Large Volumes of Adipose Tissue.

    Science.gov (United States)

    He, Yunfan; Dong, Ziqing; Xie, Gan; Zhou, Tao; Lu, Feng

    2017-04-01

    Noninvasive external volume expansion device has been applied to stimulate nonsurgical breast enlargement in clinical settings. Although previous results demonstrate the capacity of external volume expansion to increase the number of adipocytes, this strategy alone is insufficient to reconstruct soft-tissue defects or increase breast mass. The authors combined a minimally invasive tissue dissection method with external volume expansion to generate large volumes of adipose tissue. In vitro, various densities of adipose-derived stem cells were prepared to evaluate relations between cell contacts and cell proliferation. In vivo, dorsal adipose tissue of rabbits was thoroughly dissected and the external volume expansion device was applied to maintain the released state. External volume expansion without tissue dissection served as the control. In the dissection group, the generated adipose tissue volume was much larger than that in the control group at all time points. A larger number of proliferating cells appeared in the dissection samples than in the control samples at the early stage after tissue dissection. At low cell density, adipose-derived stem cells displayed an increasing proliferation rate compared to high cell density. Protein expression analysis revealed that cell proliferation was mediated by a similar mechanism both in vivo and in vitro, involving the release of cell contact inhibition and Hippo/Yes-associated protein pathway activation. Adipose tissue dissection releases cell-to-cell contacts and induces adipose-derived stem cell proliferation. Preexpanded adipose-derived stem cells undergo adipogenesis under the adipogenic environment created by external volume expansion, leading to better adipose regeneration compared with the control.

  9. Biodegradable Polymers in Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Leon E. Govaert

    2009-07-01

    Full Text Available The use ofdegradable polymers in medicine largely started around the mid 20th century with their initial use as in vivo resorbing sutures. Thorough knowledge on this topic as been gained since then and the potential applications for these polymers were, and still are, rapidly expanding. After improving the properties of lactic acid-based polymers, these were no longer studied only from a scientific point of view, but also for their use in bone surgery in the 1990s. Unfortunately, after implanting these polymers, different foreign body reactions ranging from the presence of white blood cells to sterile sinuses with resorption of the original tissue were observed. This led to the misconception that degradable polymers would, in all cases, lead to inflammation and/or osteolysis at the implantation site. Nowadays, we have accumulated substantial knowledge on the issue of biocompatibility of biodegradable polymers and are able to tailor these polymers for specific applications and thereby strongly reduce the occurrence of adverse tissue reactions. However, the major issue of biofunctionality, when mechanical adaptation is taken into account, has hitherto been largely unrecognized. A thorough understanding of how to improve the biofunctionality, comprising biomechanical stability, but also visualization and sterilization of the material, together with the avoidance of fibrotic tissue formation and foreign body reactions, may greatly enhance the applicability and safety of degradable polymers in a wide area of tissue engineering applications. This review will address our current understanding of these biofunctionality factors, and will subsequently discuss the pitfalls remaining and potential solutions to solve these problems.

  10. Engineering bone tissue substitutes from human induced pluripotent stem cells

    National Research Council Canada - National Science Library

    Giuseppe Maria de Peppo; Iván Marcos-Campos; David John Kahler; Dana Alsalman; Linshan Shang; Gordana Vunjak-Novakovic; Darja Marolt

    2013-01-01

    ...) for bone tissue engineering. We first induced three hiPSC lines with different tissue and reprogramming backgrounds into the mesenchymal lineages and used a combination of differentiation assays, surface antigen profiling...

  11. The Use of Adipose Tissue-Derived Progenitors in Bone Tissue Engineering - a Review

    Science.gov (United States)

    Bhattacharya, Indranil; Ghayor, Chafik; Weber, Franz E.

    2016-01-01

    2500 years ago, Hippocrates realized that bone can heal without scaring. The natural healing potential of bone is, however, restricted to small defects. Extended bone defects caused by trauma or during tumor resections still pose a huge problem in orthopedics and cranio-maxillofacial surgery. Bone tissue engineering strategies using stem cells, growth factors, and scaffolds could overcome the problems with the treatment of extended bone defects. In this review, we give a short overview on bone tissue engineering with emphasis on the use of adipose tissue-derived stem cells and small molecules.

  12. Interactions between remodelling, architecture and tissue properties in cancellous bone

    NARCIS (Netherlands)

    J.C. van der Linden (Jacqueline)

    2003-01-01

    textabstractThe aim of the research projects described in this thesis was to gain more insight in the regulation of bone remodeling and in the interactions between bone remodeling, architecture and bone tissue properties. The most striking changes during aging and osteoporosis take place in cancello

  13. Interactions between remodelling, architecture and tissue properties in cancellous bone

    NARCIS (Netherlands)

    J.C. van der Linden (Jacqueline)

    2003-01-01

    textabstractThe aim of the research projects described in this thesis was to gain more insight in the regulation of bone remodeling and in the interactions between bone remodeling, architecture and bone tissue properties. The most striking changes during aging and osteoporosis take place in cancello

  14. Non-viral gene therapy for bone tissue engineering

    NARCIS (Netherlands)

    Wegman, F.

    2013-01-01

    In bone tissue engineering bone morphogentic protein-2 (BMP-2) is one of the most commonly used growth factors. It induces stem cells to differentiate into the osteogenic lineage to form new bone. Clinically however, high dosages of protein are administered due to fast degradation, which is associat

  15. Rapid prototyping technology and its application in bone tissue engineering.

    Science.gov (United States)

    Yuan, Bo; Zhou, Sheng-Yuan; Chen, Xiong-Sheng

    Bone defects arising from a variety of reasons cannot be treated effectively without bone tissue reconstruction. Autografts and allografts have been used in clinical application for some time, but they have disadvantages. With the inherent drawback in the precision and reproducibility of conventional scaffold fabrication techniques, the results of bone surgery may not be ideal. This is despite the introduction of bone tissue engineering which provides a powerful approach for bone repair. Rapid prototyping technologies have emerged as an alternative and have been widely used in bone tissue engineering, enhancing bone tissue regeneration in terms of mechanical strength, pore geometry, and bioactive factors, and overcoming some of the disadvantages of conventional technologies. This review focuses on the basic principles and characteristics of various fabrication technologies, such as stereolithography, selective laser sintering, and fused deposition modeling, and reviews the application of rapid prototyping techniques to scaffolds for bone tissue engineering. In the near future, the use of scaffolds for bone tissue engineering prepared by rapid prototyping technology might be an effective therapeutic strategy for bone defects.

  16. Residual stress in bone structure and tissue of rabbit's tibiofibula.

    Science.gov (United States)

    Tadano, Shigeru; Okoshi, Taro

    2006-01-01

    This paper presents an X-ray diffraction method of measuring the residual stress/strain in bone tissue of rabbit's tibia. To derive the residual stress, bone powder of the diameter less than 40 micrometers was used as a control specimen at non-stressed state. From the X-ray measurements, it was clear that the distribution of residual stress existed in the bone tissue. The tensile residual stress at bone axial direction occurred in the proximal-medial region of rabbit's tibia. The compressive stress occurred in the other regions. In addition, the mechanism to generate the residual stress was investigated by sequential cutting of the tibiofibula system from bone structure scale to bone tissue scale. The remodeling is a phenomenon that the bone structure adapts functionally to mechanical environment. The residual stress will become a mechanical trigger to induce the remodeling.

  17. A bioreactor system for clinically relevant bone tissue engineering

    NARCIS (Netherlands)

    Janssen, Franciscus Wilhelmus

    2010-01-01

    Tissue engineering of bone by combining mesenchymal stem cells (MSCs) with a suitable ceramic carrier provides a potential alternative for autologous bone grafts. However, for large scale-production, the current two dimensional (2D) multiplication process in tissue culture flasks has some serious dr

  18. Sinusoidal electromagnetic fields promote bone formation and inhibit bone resorption in rat femoral tissues in vitro.

    Science.gov (United States)

    Zhou, Jian; Ma, Xiao-Ni; Gao, Yu-Hai; Yan, Juan-Li; Shi, Wen-Gui; Xian, Cory J; Chen, Ke-Ming

    2016-01-01

    Effects of sinusoidal electromagnetic fields (SEMFs) on bone metabolism have not yet been well defined. The present study investigated SEMF effects on bone formation and resorption in rat femur bone tissues in vitro. Cultured femur diaphyseal (cortical bone) and metaphyseal (trabecular bone) tissues were treated with 50 Hz 1.8 mT SEMFs 1.5 h per day for up to 12 days and treatment effects on bone formation and resorption markers and associated gene expression were examined. Treatment with SEMFs caused a significant increase in alkaline phosphatase (ALP) activity and inhibited the tartrate-resistant acid phosphatase (TRACP) activity in the femoral diaphyseal or metaphyseal tissues. SEMFs also significantly increased levels of mRNA expression of osterix (OSX), insulin-like growth factor (IGF-1) and ALP in the bone tissues. SEMF treatment decreased glucose content and increased lactic acid contents in the culture conditioned medium. In addition, treatment with SEMFs decreased mRNA expression levels of bone resorption-related genes TRACP, macrophage colony stimulating factor (M-CSF) and cathepsin K (CTSK) in the cultured bone tissues. In conclusion, the current study demonstrated that treatment with 1.8 mT SEMFs at 1.5 h per day promoted bone formation, increased metabolism and inhibited resorption in both metaphyseal and diaphyseal bone tissues in vitro.

  19. Organ and tissue level properties are more sensitive to age than osteocyte lacunar characteristics in rat cortical bone

    DEFF Research Database (Denmark)

    Wittig, Nina; Bach-Gansmo, Fiona Linnea; Birkbak, Mie Elholm

    2016-01-01

    lacunar properties in rat cortical bone. Femora of 14 to 42-week-old female Wistar rats were investigated using multiple complementary techniques including X-ray micro-computed tomography and biomechanical testing. The body weight, femoral length, aBMD, load to fracture, tissue volume, bone volume......, and tissue density were found to increase rapidly with age at 14–30 weeks. At the age of 30–42 weeks, the growth rate appeared to decrease. However, no accompanying changes were found in osteocyte lacunar properties such as lacunar volume, ellipsoidal radii, lacunar stretch, lacunar oblateness, or lacunar...... orientation with animal age. Hence, the evolution of organ and tissue level properties with age in rat cortical bone is not accompanied by related changes in osteocyte lacunar properties. This suggests that bone microstructure and bone matrix material properties and not the geometric properties...

  20. Injectable hydrogels for cartilage and bone tissue engineering

    Science.gov (United States)

    Liu, Mei; Zeng, Xin; Ma, Chao; Yi, Huan; Ali, Zeeshan; Mou, Xianbo; Li, Song; Deng, Yan; He, Nongyue

    2017-01-01

    Tissue engineering has become a promising strategy for repairing damaged cartilage and bone tissue. Among the scaffolds for tissue-engineering applications, injectable hydrogels have demonstrated great potential for use as three-dimensional cell culture scaffolds in cartilage and bone tissue engineering, owing to their high water content, similarity to the natural extracellular matrix (ECM), porous framework for cell transplantation and proliferation, minimal invasive properties, and ability to match irregular defects. In this review, we describe the selection of appropriate biomaterials and fabrication methods to prepare novel injectable hydrogels for cartilage and bone tissue engineering. In addition, the biology of cartilage and the bony ECM is also summarized. Finally, future perspectives for injectable hydrogels in cartilage and bone tissue engineering are discussed. PMID:28584674

  1. Meshless methods in biomechanics bone tissue remodelling analysis

    CERN Document Server

    Belinha, Jorge

    2014-01-01

    This book presents the complete formulation of a new advanced discretization meshless technique: the Natural Neighbour Radial Point Interpolation Method (NNRPIM). In addition, two of the most popular meshless methods, the EFGM and the RPIM, are fully presented. Being a truly meshless method, the major advantages of the NNRPIM over the FEM, and other meshless methods, are the remeshing flexibility and the higher accuracy of the obtained variable field. Using the natural neighbour concept, the NNRPIM permits to determine organically the influence-domain, resembling the cellulae natural behaviour. This innovation permits the analysis of convex boundaries and extremely irregular meshes, which is an advantage in the biomechanical analysis, with no extra computational effort associated.   This volume shows how to extend the NNRPIM to the bone tissue remodelling analysis, expecting to contribute with new numerical tools and strategies in order to permit a more efficient numerical biomechanical analysis.

  2. Impact of tumor volume doubling time on post-metastatic survival in bone or soft-tissue sarcoma patients treated with metastasectomy and/or radiofrequency ablation of the lung

    Science.gov (United States)

    Nakamura, Tomoki; Matsumine, Akihiko; Takao, Motoshi; Nakatsuka, Atsuhiro; Matsubara, Takao; Asanuma, Kunihiro; Sudo, Akihiro

    2017-01-01

    Metastasectomy represents the standard treatment for improving survival in patients with lung metastases (LMs) from bone (BS) or soft-tissue sarcoma (STS). Recently, radiofrequency ablation (RFA) of the LMs has been proved to be a useful option which can promise the similar effect to metastasectomy. The aim of this study was to determine prognostic factors, including tumor volume doubling time (TVDT), for post-metastatic survival in BS and STS patients treated with metastasectomy and/or RFA of the lung. Forty-eight patients with LMs were retrospectively reviewed. The mean age of the patients at the time of LMs was 56 years. The cohort comprised 27 male and 21 female patients. Eight of the 48 patients had LMs at the point of initial presentation. The mean follow-up period after commencing the treatment for LMs was 37 months. The mean maximum diameter of the initial LMs was 11 mm. The mean number of LMs was 4. The TVDT was calculated using a method originally described by Schwartz. At last follow-up, 5 patients had no evidence of disease, 3 patients were still alive with disease, and 32 patients had died of disease. The 3-year and 5-year post-metastatic survival rates were 32% and 16.8%, respectively. In a Cox univariate analysis, the size (P=0.04) and number of LMs (P<0.001), disease-free interval (P=0.04), curability of the initial LMs (P<0.001), and TVDT (P<0.001) were significantly identified as factors which affect prognosis. In the multivariate analysis, TVDT (P<0.001) and curability of the initial LMs (P<0.001) were confirmed as independent predictors of survival. There was a significant association between the number and curability of the initial LMs (P<0.001). In conclusion, metastasectomy and/or RFA of LMs is recommended for improving survival. However, TVDT and the curability of the LMs should be taken into consideration. PMID:28203089

  3. [Scanning electron microscopy of heat-damaged bone tissue].

    Science.gov (United States)

    Harsanyl, L

    1977-02-01

    Parts of diaphyses of bones were exposed to high temperature of 200-1300 degrees C. Damage to the bone tissue caused by the heat was investigated. The scanning electron microscopic picture seems to be characteristic of the temperature applied. When the bones heated to the high temperature of 700 degrees C characteristic changes appear on the periostal surface, higher temperatura on the other hand causes damage to the compact bone tissue and can be observed on the fracture-surface. Author stresses the importance of this technique in the legal medicine and anthropology.

  4. A newly developed snack effective for enhancing bone volume

    Directory of Open Access Journals (Sweden)

    Hayashi Hidetaka

    2009-07-01

    Full Text Available Abstract Background The incidence of primary osteoporosis is higher in Japan than in USA and European countries. Recently, the importance of preventive medicine has been gradually recognized in the field of orthopaedic surgery with a concept that peak bone mass should be increased in childhood as much as possible for the prevention of osteoporosis. Under such background, we have developed a new bean snack with an aim to improve bone volume loss. In this study, we examined the effects of a newly developed snack on bone volume and density in osteoporosis model mice. Methods Orchiectomy (ORX and ovariectomy (OVX were performed for C57BL/6J mice of twelve-week-old (Jackson Laboratory, Bar Harbar, ME, USA were used in this experiment. We prepared and given three types of powder diet e.g.: normal calcium diet (NCD, Ca: 0.9%, Clea Japan Co., Tokyo, Japan, low calcium diet (LCD, Ca: 0.63%, Clea Japan Co., and special diet (SCD, Ca: 0.9%. Eighteen weeks after surgery, all the animals were sacrified and prepared for histomorphometric analysis to quantify bone density and bone mineral content. Results As a result of histomorphometric examination, SCD was revealed to enhance bone volume irrespective of age and sex. The bone density was increased significantly in osteoporosis model mice fed the newly developmental snack as compared with the control mice. The bone mineral content was also enhanced significantly. These phenomena were revealed in both sexes. Conclusion It is shown that the newly developed bean snack is highly effective for the improvement of bone volume loss irrespective of sex. We demonstrated that newly developmental snack supplements may be a useful preventive measure for Japanese whose bone mineral density values are less than the ideal condition.

  5. Bisphosphonate-adsorbed ceramic nanoparticles increase bone formation in an injectable carrier for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Tegan L Cheng

    2015-10-01

    Full Text Available Sucrose acetate isobutyrate (SAIB is a sugar-based carrier. We have previously applied SAIB as a minimally invasive system for the co-delivery of recombinant human bone morphogenetic protein-2 (rhBMP-2 and found synergy when co-delivering zoledronic acid (ZA and hydroxyapatite (HA nanoparticles. Alternative bioceramics were investigated in a murine SAIB/rhBMP-2 injection model. Neither beta-tricalcium phosphate (TCP nor Bioglass (BG 45S5 had a significant effect on bone volume (BV alone or in combination with the ZA. 14C-labelled ZA binding assays showed particle size and ceramic composition affected binding with nano-HA > micro-HA > TCP > BG. Micro-HA and nano-HA increased BV in a rat model of rhBMP-2/SAIB injection (+278% and +337%, and BV was further increased with ZA–adsorbed micro-HA and nano-HA (+530% and +889%. These data support the use of ZA–adsorbed nanoparticle-sized HA as an optimal additive for the SAIB/rhBMP-2 injectable system for bone tissue engineering.

  6. Spatial resolution and measurement uncertainty of strains in bone and bone-cement interface using digital volume correlation.

    Science.gov (United States)

    Zhu, Ming-Liang; Zhang, Qing-Hang; Lupton, Colin; Tong, Jie

    2016-04-01

    The measurement uncertainty of strains has been assessed in a bone analogue (sawbone), bovine trabecular bone and bone-cement interface specimens under zero load using the Digital Volume Correlation (DVC) method. The effects of sub-volume size, sample constraint and preload on the measured strain uncertainty have been examined. There is generally a trade-off between the measurement uncertainty and the spatial resolution. Suitable sub-volume sizes have been be selected based on a compromise between the measurement uncertainty and the spatial resolution of the cases considered. A ratio of sub-volume size to a microstructure characteristic (Tb.Sp) was introduced to reflect a suitable spatial resolution, and the measurement uncertainty associated was assessed. Specifically, ratios between 1.6 and 4 appear to give rise to standard deviations in the measured strains between 166 and 620 με in all the cases considered, which would seem to suffice for strain analysis in pre as well as post yield loading regimes. A microscale finite element (μFE) model was built from the CT images of the sawbone, and the results from the μFE model and a continuum FE model were compared with those from the DVC. The strain results were found to differ significantly between the two methods at tissue level, consistent in trend with the results found in human bones, indicating mainly a limitation of the current DVC method in mapping strains at this level.

  7. Nanomechanical mapping of bone tissue regenerated by magnetic scaffolds.

    Science.gov (United States)

    Bianchi, Michele; Boi, Marco; Sartori, Maria; Giavaresi, Gianluca; Lopomo, Nicola; Fini, Milena; Dediu, Alek; Tampieri, Anna; Marcacci, Maurilio; Russo, Alessandro

    2015-01-01

    Nanoindentation can provide new insights on the maturity stage of regenerating bone. The aim of the present study was the evaluation of the nanomechanical properties of newly-formed bone tissue at 4 weeks from the implantation of permanent magnets and magnetic scaffolds in the trabecular bone of rabbit femoral condyles. Three different groups have been investigated: MAG-A (NdFeB magnet + apatite/collagen scaffold with magnetic nanoparticles directly nucleated on the collagen fibers during scaffold synthesis); MAG-B (NdFeB magnet + apatite/collagen scaffold later infiltrated with magnetic nanoparticles) and MAG (NdFeB magnet). The mechanical properties of different-maturity bone tissues, i.e. newly-formed immature, newly-formed mature and native trabecular bone have been evaluated for the three groups. Contingent correlations between elastic modulus and hardness of immature, mature and native bone have been examined and discussed, as well as the efficacy of the adopted regeneration method in terms of "mechanical gap" between newly-formed and native bone tissue. The results showed that MAG-B group provided regenerated bone tissue with mechanical properties closer to that of native bone compared to MAG-A or MAG groups after 4 weeks from implantation. Further, whereas the mechanical properties of newly-formed immature and mature bone were found to be fairly good correlated, no correlation was detected between immature or mature bone and native bone. The reported results evidence the efficacy of nanoindentation tests for the investigation of the maturity of newly-formed bone not accessible through conventional analyses.

  8. Bone volume fraction explains the variation in strength and stiffness of cancellous bone affected by metastatic cancer and osteoporosis.

    Science.gov (United States)

    Nazarian, Ara; von Stechow, Dietrich; Zurakowski, David; Müller, Ralph; Snyder, Brian D

    2008-12-01

    Preventing nontraumatic fractures in millions of patients with osteoporosis or metastatic cancer may significantly reduce the associated morbidity and reduce health-care expenditures incurred by these fractures. Predicting fracture occurrence requires an accurate understanding of the relationship between bone structure and the mechanical properties governing bone fracture that can be readily measured. The aim of this study was to test the hypothesis that a single analytic relationship with either bone tissue mineral density or bone volume fraction (BV/TV) as independent variables could predict the strength and stiffness of normal and pathologic cancellous bone affected by osteoporosis or metastatic cancer. After obtaining institutional review board approval and informed consent, 15 patients underwent excisional biopsy of metastatic prostate, breast, lung, ovarian, or colon cancer from the spine and/or femur to obtain 41 metastatic cancer specimens. In addition, 96 noncancer specimens were excised from 43 age- and site-matched cadavers. All specimens were imaged using micro-computed tomography (micro-CT) and backscatter emission imaging and tested mechanically by uniaxial compression and nanoindentation. The minimum BV/TV, measured using quantitative micro-CT, accounted for 84% of the variation in bone stiffness and strength for all cancellous bone specimens. While relationships relating bone density to strength and stiffness have been derived empirically for normal and osteoporotic bone, these relationships have not been applied to skeletal metastases. This simple analytic relationship will facilitate large-scale screening and prediction of fracture risk for normal and pathologic cancellous bone using clinical CT systems to determine the load capacity of bones altered by metastatic cancer, osteoporosis, or both.

  9. Alginate composites for bone tissue engineering: a review.

    Science.gov (United States)

    Venkatesan, Jayachandran; Bhatnagar, Ira; Manivasagan, Panchanathan; Kang, Kyong-Hwa; Kim, Se-Kwon

    2015-01-01

    Bone is a complex and hierarchical tissue consisting of nano hydroxyapatite and collagen as major portion. Several attempts have been made to prepare the artificial bone so as to replace the autograft and allograft treatment. Tissue engineering is a promising approach to solve the several issues and is also useful in the construction of artificial bone with materials including polymer, ceramics, metals, cells and growth factors. Composites consisting of polymer-ceramics, best mimic the natural functions of bone. Alginate, an anionic polymer owing enormous biomedical applications, is gaining importance particularly in bone tissue engineering due to its biocompatibility and gel forming properties. Several composites such as alginate-polymer (PLGA, PEG and chitosan), alginate-protein (collagen and gelatin), alginate-ceramic, alginate-bioglass, alginate-biosilica, alginate-bone morphogenetic protein-2 and RGD peptides composite have been investigated till date. These alginate composites show enhanced biochemical significance in terms of porosity, mechanical strength, cell adhesion, biocompatibility, cell proliferation, alkaline phosphatase increase, excellent mineralization and osteogenic differentiation. Hence, alginate based composite biomaterials will be promising for bone tissue regeneration. This review will provide a broad overview of alginate preparation and its applications towards bone tissue engineering.

  10. Chitosan Composites for Bone Tissue Engineering—An Overview

    Directory of Open Access Journals (Sweden)

    Jayachandran Venkatesan

    2010-08-01

    Full Text Available Bone contains considerable amounts of minerals and proteins. Hydroxyapatite [Ca10(PO46(OH2] is one of the most stable forms of calcium phosphate and it occurs in bones as major component (60 to 65%, along with other materials including collagen, chondroitin sulfate, keratin sulfate and lipids. In recent years, significant progress has been made in organ transplantation, surgical reconstruction and the use of artificial protheses to treat the loss or failure of an organ or bone tissue. Chitosan has played a major role in bone tissue engineering over the last two decades, being a natural polymer obtained from chitin, which forms a major component of crustacean exoskeleton. In recent years, considerable attention has been given to chitosan composite materials and their applications in the field of bone tissue engineering due to its minimal foreign body reactions, an intrinsic antibacterial nature, biocompatibility, biodegradability, and the ability to be molded into various geometries and forms such as porous structures, suitable for cell ingrowth and osteoconduction. The composite of chitosan including hydroxyapatite is very popular because of the biodegradability and biocompatibility in nature. Recently, grafted chitosan natural polymer with carbon nanotubes has been incorporated to increase the mechanical strength of these composites. Chitosan composites are thus emerging as potential materials for artificial bone and bone regeneration in tissue engineering. Herein, the preparation, mechanical properties, chemical interactions and in vitro activity of chitosan composites for bone tissue engineering will be discussed.

  11. Endochondral Priming: A Developmental Engineering Strategy for Bone Tissue Regeneration.

    Science.gov (United States)

    Freeman, Fiona E; McNamara, Laoise M

    2017-04-01

    Tissue engineering and regenerative medicine have significant potential to treat bone pathologies by exploiting the capacity for bone progenitors to grow and produce tissue constituents under specific biochemical and physical conditions. However, conventional tissue engineering approaches, which combine stem cells with biomaterial scaffolds, are limited as the constructs often degrade, due to a lack of vascularization, and lack the mechanical integrity to fulfill load bearing functions, and as such are not yet widely used for clinical treatment of large bone defects. Recent studies have proposed that in vitro tissue engineering approaches should strive to simulate in vivo bone developmental processes and, thereby, imitate natural factors governing cell differentiation and matrix production, following the paradigm recently defined as "developmental engineering." Although developmental engineering strategies have been recently developed that mimic specific aspects of the endochondral ossification bone formation process, these findings are not widely understood. Moreover, a critical comparison of these approaches to standard biomaterial-based bone tissue engineering has not yet been undertaken. For that reason, this article presents noteworthy experimental findings from researchers focusing on developing an endochondral-based developmental engineering strategy for bone tissue regeneration. These studies have established that in vitro approaches, which mimic certain aspects of the endochondral ossification process, namely the formation of the cartilage template and the vascularization of the cartilage template, can promote mineralization and vascularization to a certain extent both in vitro and in vivo. Finally, this article outlines specific experimental challenges that must be overcome to further exploit the biology of endochondral ossification and provide a tissue engineering construct for clinical treatment of large bone/nonunion defects and obviate the need for

  12. Polymeric composites containing carbon nanotubes for bone tissue engineering.

    Science.gov (United States)

    Sahithi, Kolli; Swetha, Maddela; Ramasamy, Kumarasamy; Srinivasan, Narasimhan; Selvamurugan, Nagarajan

    2010-04-01

    Several natural and synthetic polymers are now available for bone tissue engineering applications but they may lack mechanical integrity. In recent years, there are reports emphasizing the importance of carbon nanotubes (CNTs) in supporting bone growth. CNTs possess exceptional mechanical, thermal, and electrical properties, facilitating their use as reinforcements or additives in various materials to improve the properties of the materials. Biomaterials containing polymers often are placed adjacent to bone. The use of CNTs is anticipated in these biomaterials applied to bone mainly to improve their overall mechanical properties and expected to act as scaffolds to promote and guide bone tissue regeneration. This review paper provides a current state of knowledge available examining the use of the polymeric composites containing CNTs for promoting bone growth.

  13. Tissue reaction and material characteristics of four bone substitutes

    DEFF Research Database (Denmark)

    Jensen, S S; Aaboe, M; Pinholt, E M

    1996-01-01

    The aim of the present study was to qualitatively and quantitatively compare the tissue reactions around four different bone substitutes used in orthopedic and craniofacial surgery. Cylinders of two bovine bone substitutes (Endobon and Bio-Oss) and two coral-derived bone substitutes (Pro Osteon 500......-Oss was osseointegrated to a higher degree than the other biomaterials. Material characteristics obtained by diffuse reflectance infrared Fourier transform spectrometry analysis and energy-dispersive spectrometry did not explain the differences in biologic behavior....

  14. Stem and progenitor cells: advancing bone tissue engineering.

    Science.gov (United States)

    Tevlin, R; Walmsley, G G; Marecic, O; Hu, Michael S; Wan, D C; Longaker, M T

    2016-04-01

    Unlike many other postnatal tissues, bone can regenerate and repair itself; nevertheless, this capacity can be overcome. Traditionally, surgical reconstructive strategies have implemented autologous, allogeneic, and prosthetic materials. Autologous bone--the best option--is limited in supply and also mandates an additional surgical procedure. In regenerative tissue engineering, there are myriad issues to consider in the creation of a functional, implantable replacement tissue. Importantly, there must exist an easily accessible, abundant cell source with the capacity to express the phenotype of the desired tissue, and a biocompatible scaffold to deliver the cells to the damaged region. A literature review was performed using PubMed; peer-reviewed publications were screened for relevance in order to identify key advances in stem and progenitor cell contribution to the field of bone tissue engineering. In this review, we briefly introduce various adult stem cells implemented in bone tissue engineering such as mesenchymal stem cells (including bone marrow- and adipose-derived stem cells), endothelial progenitor cells, and induced pluripotent stem cells. We then discuss numerous advances associated with their application and subsequently focus on technological advances in the field, before addressing key regenerative strategies currently used in clinical practice. Stem and progenitor cell implementation in bone tissue engineering strategies have the ability to make a major impact on regenerative medicine and reduce patient morbidity. As the field of regenerative medicine endeavors to harness the body's own cells for treatment, scientific innovation has led to great advances in stem cell-based therapies in the past decade.

  15. Powder-based 3D printing for bone tissue engineering.

    Science.gov (United States)

    Brunello, G; Sivolella, S; Meneghello, R; Ferroni, L; Gardin, C; Piattelli, A; Zavan, B; Bressan, E

    2016-01-01

    Bone tissue engineered 3-D constructs customized to patient-specific needs are emerging as attractive biomimetic scaffolds to enhance bone cell and tissue growth and differentiation. The article outlines the features of the most common additive manufacturing technologies (3D printing, stereolithography, fused deposition modeling, and selective laser sintering) used to fabricate bone tissue engineering scaffolds. It concentrates, in particular, on the current state of knowledge concerning powder-based 3D printing, including a description of the properties of powders and binder solutions, the critical phases of scaffold manufacturing, and its applications in bone tissue engineering. Clinical aspects and future applications are also discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Influence of bone volume fraction and architecture on computed large-deformation failure mechanisms in human trabecular bone.

    Science.gov (United States)

    Bevill, Grant; Eswaran, Senthil K; Gupta, Atul; Papadopoulos, Panayiotis; Keaveny, Tony M

    2006-12-01

    Large-deformation bending and buckling have long been proposed as failure mechanisms by which the strength of trabecular bone can be affected disproportionately to changes in bone density, and thus may represent an important aspect of bone quality. We sought here to quantify the contribution of large-deformation failure mechanisms on strength, to determine the dependence of these effects on bone volume fraction and architecture, and to confirm that the inclusion of large-deformation effects in high-resolution finite element models improves predictions of strength versus experiment. Micro-CT-based finite element models having uniform hard tissue material properties were created from 54 cores of human trabecular bone taken from four anatomic sites (age = 70+/-11; 24 male, 27 female donors), which were subsequently biomechanically tested to failure. Strength predictions were made from the models first including, then excluding, large-deformation failure mechanisms, both for compressive and tensile load cases. As expected, strength predictions versus experimental data for the large-deformation finite element models were significantly improved (p deformation models in both tension and compression. Below a volume fraction of about 0.20, large-deformation failure mechanisms decreased trabecular strength from 5-80% for compressive loading, while effects were negligible above this volume fraction. Step-wise nonlinear multiple regression revealed that structure model index (SMI) and volume fraction (BV/TV) were significant predictors of these reductions in strength (R2 = 0.83, p deformation failure mechanisms on trabecular bone strength is highly heterogeneous and is not well explained by standard architectural metrics.

  17. Biomechanical researches on tissue engineering bone constructed by deproteinated bone

    Institute of Scientific and Technical Information of China (English)

    JIAN Yue-kui; TIAN Xiao-bin; LI Qi-hong; LI Bo; PENG Zhi; ZHAO Wei-feng; WANG Yuan-zheng; YANG Zhen

    2010-01-01

    Objective:To study biomechanical changes of newly formed bones 24 weeks after repairing large defects of long bones of goats using heterogeneous deproteinated bone(DPB)prepared by modified methods as an engineering scaffold.Methods:According to a fully randomized design,18 goats were evenly divided into three groups:normal bone control group(Group A),autologous bone group(Group B)and experimental group(Group C).Each goat in Groups B and C were subjected to the periosteum and bone defect at middle-lower part of the fight tibia(20% of the whole tibia in length),followed by autologous bone or DPB plus autologous MSCs + rhBMP2 implantation,respectively and semiring slot fixation;while goats in Group A did not perform osteotomy.At 24 weeks after surgery,biomechanical tests were carried out on the tibias.Results:At 24 weeks after surgery,the results of anticompression test on tibias in three groups were recorded by a functional recorder presented as linear pressure-deformation curve.The shapes of the curves and their change tendency were similar among three groups.The ultimate pressure values were 10.74 Mpa±1.23 Mpa,10.11 Mpa±1.35 Mpa and 10.22 Mpa±1.32 Mpa and fracture compression rates were 26.82%±0.87%,27.17%±0.75% and 28.22%±1.12% in Groups A,B and C,respectively.Comparisons of anti-compression ultimate pressures and fracture compression rates among three groups demonstrated no significant difference(P_(AB)=0.415,P_(BC)=0.494).Three-point antibend test on tibias was recorded as load-deformation curves,and the shapes of the curves and their change tendency were similar among three groups.The ultimate pressure values of the anti-bend test were 481.52 N±12.45 N,478.34 N±14.68 N and 475.62 N±13.41 N and the fracture bend rates were 2.62 mm±0.12 mm,2.61 mm±0.15 mm and 2.81 mm±0.13 mm in Groups A,B and C,respectively.There was no significant difference between groups(P_(AB)=0.7,P_(BC)=0.448).The ultirates were 29.51°±1.64°,28.88°±1.46° and 28.81°±1.33

  18. Pathologic bone tissues in a Turkey vulture and a nonavian dinosaur: implications for interpreting endosteal bone and radial fibrolamellar bone in fossil dinosaurs.

    Science.gov (United States)

    Chinsamy, Anusuya; Tumarkin-Deratzian, Allison

    2009-09-01

    We report on similar pathological bone microstructure in an extant turkey vulture (Cathartes aura) and a nonavian dinosaur from Transylvania. Both these individuals exhibit distinctive periosteal reactive bone deposition accompanied by endosteal bone deposits in the medullary cavity. Our findings have direct implications on the two novel bone tissues recently described among nonavian dinosaurs, radial fibrolamellar bone tissue and medullary bone tissue. On the basis of the observed morphology of the periosteal reactive bone in the turkey vulture and the Transylvanian dinosaur, we propose that the radial fibrolamellar bone tissues observed in mature dinosaurs may have had a pathological origin. Our analysis also shows that on the basis of origin, location, and morphology, pathologically derived endosteal bone tissue can be similar to medullary bone tissues described in nonavian dinosaurs. As such, we caution the interpretation of all endosteally derived bone tissue as homologous to avian medullary bone.

  19. Biodegradable Polymer-Based Scaffolds for Bone Tissue Engineering

    CERN Document Server

    Sultana, Naznin

    2013-01-01

    This book addresses the principles, methods and applications of biodegradable polymer based scaffolds for bone tissue engineering. The general principle of bone tissue engineering is reviewed and the traditional and novel scaffolding materials, their properties and scaffold fabrication techniques are explored. By acting as temporary synthetic extracellular matrices for cell accommodation, proliferation, and differentiation, scaffolds play a pivotal role in tissue engineering. This book does not only provide the comprehensive summary of the current trends in scaffolding design but also presents the new trends and directions for scaffold development for the ever expanding tissue engineering applications.

  20. The dependencies of phase velocity and dispersion on volume fraction in cancellous-bone-mimicking phantoms.

    Science.gov (United States)

    Wear, Keith A

    2009-02-01

    Frequency-dependent phase velocity was measured in eight cancellous-bone-mimicking phantoms consisting of suspensions of randomly oriented nylon filaments (simulating trabeculae) in a soft-tissue-mimicking medium (simulating marrow). Trabecular thicknesses ranged from 152 to 356 mum. Volume fractions of nylon filament material ranged from 0% to 10%. Phase velocity varied approximately linearly with frequency over the range from 300 to 700 kHz. The increase in phase velocity (compared with phase velocity in a phantom containing no filaments) at 500 kHz was approximately proportional to volume fraction occupied by nylon filaments. The derivative of phase velocity with respect to frequency was negative and exhibited nonlinear, monotonically decreasing dependence on volume fraction. The dependencies of phase velocity and its derivative on volume fraction in these phantoms were similar to those reported in previous studies on (1) human cancellous bone and (2) phantoms consisting of parallel nylon wires immersed in water.

  1. Microarchitectural adaptations in aging and osteoarthrotic subchondral bone tissues

    DEFF Research Database (Denmark)

    Ding, Ming

    2010-01-01

    The human skeleton optimizes its microarchitecture by elaborate adaptations to mechanical loading during development and growth. The mechanisms for adaptation involve a multistep process of cellular mechanotransduction stimulating bone modelling, and remodeling resulting in either bone formation...... into the age-related and OA-related subchondral bone adaptations.   Microarchitectural adaptation in human aging cancellous bone The precision of micro-CT measurement is excellent. Accurate 3-D micro-CT image datasets can be generated by applying an appropriate segmentation threshold. A fixed threshold may...... and the constant nature of connectivity suggest an important bone remodeling mechanism that normal aging tibia may adapt trabecular volume orientation. Namely, that the aging trabeculae align preferentially to the primary loading direction to compensate bone loss (III). Age-related changes in trabecular thickness...

  2. Reproducibility of techniques using Archimedes' principle in measuring cancellous bone volume.

    Science.gov (United States)

    Zou, L; Bloebaum, R D; Bachus, K N

    1997-01-01

    Researchers have been interested in developing techniques to accurately and reproducibly measure the volume fraction of cancellous bone. Historically bone researchers have used Archimedes' principle with water to measure the volume fraction of cancellous bone. Preliminary results in our lab suggested that the calibrated water technique did not provide reproducible results. Because of this difficulty, it was decided to compare the conventional water method to a water with surfactant and a helium method using a micropycnometer. The water/surfactant and the helium methods were attempts to improve the fluid penetration into the small voids present in the cancellous bone structure. In order to compare the reproducibility of the new methods with the conventional water method, 16 cancellous bone specimens were obtained from femoral condyles of human and greyhound dog femora. The volume fraction measurements on each specimen were repeated three times with all three techniques. The results showed that the helium displacement method was more than an order of magnitudes more reproducible than the two other water methods (p < 0.05). Statistical analysis also showed that the conventional water method produced the lowest reproducibility (p < 0.05). The data from this study indicate that the helium displacement technique is a very useful, rapid and reproducible tool for quantitatively characterizing anisotropic porous tissue structures such as cancellous bone.

  3. Osteopontin: Relation between Adipose Tissue and Bone Homeostasis

    Science.gov (United States)

    Messina, Antonietta; Monda, Vincenzo; Viggiano, Emanuela; Valenzano, Anna; Esposito, Teresa; Cibelli, Giuseppe

    2017-01-01

    Osteopontin (OPN) is a multifunctional protein mainly associated with bone metabolism and remodeling. Besides its physiological functions, OPN is implicated in the pathogenesis of a variety of disease states, such as obesity and osteoporosis. Importantly, during the last decades obesity and osteoporosis have become among the main threats to health worldwide. Because OPN is a protein principally expressed in cells with multifaceted effects on bone morphogenesis and remodeling and because it seems to be one of the most overexpressed genes in the adipose tissue of the obese contributing to osteoporosis, this mini review will highlight recent insights about relation between adipose tissue and bone homeostasis.

  4. Melatonin Effects on Hard Tissues: Bone and Tooth

    Directory of Open Access Journals (Sweden)

    Hong-Wen He

    2013-05-01

    Full Text Available Melatonin is an endogenous hormone rhythmically produced in the pineal gland under the control of the suprachiasmatic nucleus (SCN and the light/dark cycle. This indole plays an important role in many physiological processes including circadian entrainment, blood pressure regulation, seasonal reproduction, ovarian physiology, immune function, etc. Recently, the investigation and applications of melatonin in the hard tissues bone and tooth have received great attention. Melatonin has been investigated relative to bone remolding, osteoporosis, osseointegration of dental implants and dentine formation. In the present review, we discuss the large body of published evidence and review data of melatonin effects on hard tissues, specifically, bone and tooth.

  5. Is bone tissue really affected by swimming? A systematic review.

    Directory of Open Access Journals (Sweden)

    Alejandro Gómez-Bruton

    Full Text Available BACKGROUND: Swimming, a sport practiced in hypogravity, has sometimes been associated with decreased bone mass. AIM: This systematic review aims to summarize and update present knowledge about the effects of swimming on bone mass, structure and metabolism in order to ascertain the effects of this sport on bone tissue. METHODS: A literature search was conducted up to April 2013. A total of 64 studies focusing on swimmers bone mass, structure and metabolism met the inclusion criteria and were included in the review. RESULTS: It has been generally observed that swimmers present lower bone mineral density than athletes who practise high impact sports and similar values when compared to sedentary controls. However, swimmers have a higher bone turnover than controls resulting in a different structure which in turn results in higher resistance to fracture indexes. Nevertheless, swimming may become highly beneficial regarding bone mass in later stages of life. CONCLUSION: Swimming does not seem to negatively affect bone mass, although it may not be one of the best sports to be practised in order to increase this parameter, due to the hypogravity and lack of impact characteristic of this sport. Most of the studies included in this review showed similar bone mineral density values in swimmers and sedentary controls. However, swimmers present a higher bone turnover than sedentary controls that may result in a stronger structure and consequently in a stronger bone.

  6. Effects of microgravity on rat bone, cartlage and connective tissues

    Science.gov (United States)

    Doty, S.

    1990-01-01

    The response to hypogravity by the skeletal system was originally thought to be the result of a reduction in weight bearing. Thus a reduced rate of new bone formation in the weight-bearing bones was accepted, when found, as an obvious result of hypogravity. However, data on non-weight-bearing tissues have begun to show that other physiological changes can be expected to occur to animals during spaceflight. This overview of the Cosmos 1887 data discusses these results as they pertain to individual bones or tissues because the response seems to depend on the architecture and metabolism of each tissue under study. Various effects were seen in different tissues from the rats flown on Cosmos 1887. The femur showed a reduced bone mineral content but only in the central region of the diaphysis. This same region in the tibia showed changes in the vascularity of bone as well as some osteocytic cell death. The humerus demonstrated reduced morphometric characteristics plus a decrease in mechanical stiffness. Bone mineral crystals did not mature normally as a result of flight, suggesting a defect in the matrix mineralization process. Note that these changes relate directly to the matrix portion of the bone or some function of bone which slowly responds to changes in the environment. However, most cellular functions of bone are rapid responders. The stimulation of osteoblast precursor cells, the osteoblast function in collagen synthesis, a change in the proliferation rate of cells in the epiphyseal growth plate, the synthesis and secretion of osteocalcin, and the movement of water into or out of tissues, are all processes which respond to environmental change. These rapidly responding events produced results from Cosmos 1887 which were frequently quite different from previous space flight data.

  7. Composites structures for bone tissue reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Neto, W.; Santos, João [Universidade Federal de São Carlos, Departament of Materials Engineering - Rd. Washington Luis, Km 235, 13565-905, São Carlos-SP (Brazil); Avérous, L.; Schlatter, G.; Bretas, Rosario, E-mail: bretas@ufscar.br [Université de Strasbourg, ECPM-LIPHT - 25 rue Becquerel, 67087, Strasbourg (France)

    2015-05-22

    The search for new biomaterials in the bone reconstitution field is growing continuously as humane life expectation and bone fractures increase. For this purpose, composite materials with biodegradable polymers and hydroxyapatite (HA) have been used. A composite material formed by a film, nanofibers and HA has been made. Both, the films and the non-woven mats of nanofibers were formed by nanocomposites made of butylene adipate-co-terephthalate (PBAT) and HA. The techniques used to produce the films and nanofibers were spin coating and electrospinning, respectively. The composite production and morphology were evaluated. The composite showed an adequate morphology and fibers size to be used as scaffold for cell growth.

  8. Training human mesenchymal stromal cells for bone tissue engineering applications

    NARCIS (Netherlands)

    Doorn, J.

    2012-01-01

    Human mesenchymal stromal cells (hMSCs) are an interesting source for cell therapies and tissue engineering applications, because these cells are able to differentiate into various target tissues, such as bone, cartilage, fat and endothelial cells. In addition, they secrete a wide array of growth fa

  9. Porphyromonas gingivalis infection-induced tissue and bone transcriptional profiles.

    Science.gov (United States)

    Meka, A; Bakthavatchalu, V; Sathishkumar, S; Lopez, M C; Verma, R K; Wallet, S M; Bhattacharyya, I; Boyce, B F; Handfield, M; Lamont, R J; Baker, H V; Ebersole, J L; Kesavalu, L

    2010-02-01

    Porphyromonas gingivalis has been associated with subgingival biofilms in adult periodontitis. However, the molecular mechanisms of its contribution to chronic gingival inflammation and loss of periodontal structural integrity remain unclear. This investigation aimed to examine changes in the host transcriptional profiles during a P. gingivalis infection using a murine calvarial model of inflammation and bone resorption. P. gingivalis FDC 381 was injected into the subcutaneous soft tissue over the calvaria of BALB/c mice for 3 days, after which the soft tissues and calvarial bones were excised. RNA was isolated from infected soft tissues and calvarial bones and was analysed for transcript profiles using Murine GeneChip((R)) arrays to provide a molecular profile of the events that occur following infection of these tissues. After P. gingivalis infection, 6452 and 2341 probe sets in the infected soft tissues and calvarial bone, respectively, were differentially expressed (P tissues and calvarial bone included cell adhesion (immune system) molecules, Toll-like receptors, B-cell receptor signaling, transforming growth factor-beta cytokine family receptor signaling, and major histocompatibility complex class II antigen processing pathways resulting in proinflammatory, chemotactic effects, T-cell stimulation, and downregulation of antiviral and T-cell chemotactic effects. P. gingivalis-induced inflammation activated osteoclasts, leading to local bone resorption. This is the first in vivo evidence that localized P. gingivalis infection differentially induces transcription of a broad array of host genes, the profiles of which differed between inflamed soft tissues and calvarial bone.

  10. Silk fibroin membrane used for guided bone tissue regeneration.

    Science.gov (United States)

    Cai, Yurong; Guo, Junmao; Chen, Cen; Yao, Chenxue; Chung, Sung-Min; Yao, Juming; Lee, In-Seop; Kong, Xiangdong

    2017-01-01

    With the aim to develop a novel membrane with an appropriate mechanical property and degradation rate for guided bone tissue regeneration, lyophilized and densified silk fibroin membrane was fabricated and its mechanical behavior as well as biodegradation property were investigated. The osteoconductive potency of the silk fibroin membranes were evaluated in a defect rabbit calvarial model. Silk fibroin membrane showed the modulated biodegradable and mechanical properties via ethanol treatment with different concentration. The membrane could prevent soft tissue invasion from normal tissue healing, and the amounts of new bone and defect closure with silk fibroin membrane were similar to those of commercially available collagen membrane.

  11. Wide-field Raman imaging for bone detection in tissue

    OpenAIRE

    Papour, Asael; Kwak, Jin Hee; Taylor, Zach; Wu, Benjamin; Stafsudd, Oscar; Grundfest, Warren

    2015-01-01

    Inappropriate bone growth in soft tissue can occur after trauma to a limb and can cause a disruption to the healing process. This is known as Heterotopic Ossification (HO) in which regions in the tissue start to mineralize and form microscopic bone-like structures. These structures continue to calcify and develop into large, non-functional bony masses that cause pain, limit limb movement, and expose the tissue to reoccurring infections; in the case of open wounds this can lead to amputation a...

  12. A tissue regeneration approach to bone and cartilage repair

    CERN Document Server

    Dunstan, Colin; Rosen, Vicki

    2015-01-01

    Reviewing exhaustively the current state of the art of tissue engineering strategies for regenerating bones and joints through the use of biomaterials, growth factors and stem cells, along with an investigation of the interactions between biomaterials, bone cells, growth factors and added stem cells and how together skeletal tissues can be optimised, this book serves to highlight the importance of biomaterials composition, surface topography, architectural and mechanical properties in providing support for tissue regeneration. Maximizing reader insights into the importance of the interplay of these attributes with bone cells (osteoblasts, osteocytes and osteoclasts) and cartilage cells (chondrocytes), this book also provides a detailed reference as to how key signalling pathways are activated. The contribution of growth factors to drive tissue regeneration and stem cell recruitment is discussed along with a review the potential and challenges of adult or embryonic mesenchymal stem cells to further enhance the...

  13. Bone Tissue in Down Syndrome Patients Deteriorates Following Aging: A Study Based on Bone Ultrasound Analysis

    Directory of Open Access Journals (Sweden)

    Mirela Gavris

    2014-03-01

    Conclusion: This study showed that BUA is sufficiently sensitive to highlight the bone degradation that occurs at the end of adolescence and in adulthood in individuals with DS. In addition, BUA and stabilometric performances were able to distinguish DS patients from controls in the two older age groups, indicating that bone tissue and postural control of DS patients deteriorate with aging.

  14. Whole Body Bone Tissue and Cardiovascular Risk in Rheumatoid Arthritis

    Directory of Open Access Journals (Sweden)

    Claudiu Popescu

    2014-01-01

    Full Text Available Introduction. Atherosclerosis and osteoporosis share an age-independent bidirectional correlation. Rheumatoid arthritis (RA represents a risk factor for both conditions. Objectives. The study aims to evaluate the connection between the estimated cardiovascular risk (CVR and the loss of bone tissue in RA patients. Methods. The study has a prospective cross-sectional design and it includes female in-patients with RA or without autoimmune diseases; bone tissue was measured using whole body dual X-ray absorptiometry (wbDXA; CVR was estimated using SCORE charts and PROCAM applications. Results. There were 75 RA women and 66 normal women of similar age. The wbDXA bone indices correlate significantly, negatively, and age-independently with the estimated CVR. The whole body bone percent (wbBP was a significant predictor of estimated CVR, explaining 26% of SCORE variation along with low density lipoprotein (P < 0.001 and 49.7% of PROCAM variation along with glycemia and menopause duration (P < 0.001. Although obese patients had less bone relative to body composition (wbBP, in terms of quantity their bone content was significantly higher than that of nonobese patients. Conclusions. Female patients with RA and female patients with cardiovascular morbidity have a lower whole body bone percent. Obese female individuals have higher whole body bone mass than nonobese patients.

  15. Immobilization and Application of Electrospun Nanofiber Scaffold-based Growth Factor in Bone Tissue Engineering.

    Science.gov (United States)

    Chen, Guobao; Lv, Yonggang

    2015-01-01

    Electrospun nanofibers have been extensively used in growth factor delivery and regenerative medicine due to many advantages including large surface area to volume ratio, high porosity, excellent loading capacity, ease of access and cost effectiveness. Their relatively large surface area is helpful for cell adhesion and growth factor loading, while storage and release of growth factor are essential to guide cellular behaviors and tissue formation and organization. In bone tissue engineering, growth factors are expected to transmit signals that stimulate cellular proliferation, migration, differentiation, metabolism, apoptosis and extracellular matrix (ECM) deposition. Bolus administration is not always an effective method for the delivery of growth factors because of their rapid diffusion from the target site and quick deactivation. Therefore, the integration of controlled release strategy within electrospun nanofibers can provide protection for growth factors against in vivo degradation, and can manipulate desired signal at an effective level with extended duration in local microenvironment to support tissue regeneration and repair which normally takes a much longer time. In this review, we provide an overview of growth factor delivery using biomimetic electrospun nanofiber scaffolds in bone tissue engineering. It begins with a brief introduction of different kinds of polymers that were used in electrospinning and their applications in bone tissue engineering. The review further focuses on the nanofiber-based growth factor delivery and summarizes the strategies of growth factors loading on the nanofiber scaffolds for bone tissue engineering applications. The perspectives on future challenges in this area are also pointed out.

  16. Guided bone regeneration in pig calvarial bone defects using autologous mesenchymal stem/progenitor cells - a comparison of different tissue sources.

    Science.gov (United States)

    Stockmann, Philipp; Park, Jung; von Wilmowsky, Cornelius; Nkenke, Emeka; Felszeghy, Endre; Dehner, Jan-Friedrich; Schmitt, Christian; Tudor, Christian; Schlegel, Karl Andreas

    2012-06-01

    Due to donor side morbidity and the absence of osteogenic properties in bone substitutes, there is a growing need for an alternative to traditional bone grafting within the scope of tissue engineering. This animal study was conducted to compare the in vivo osteogenic potential of adipose-derived (AD), periosteum-derived (PD) and bone marrow-derived (BM) mesenchymal stem/progenitor cells (MSC). Autologous mesenchymal stem/progenitor cells of named tissue origin were induced into osteogenic differentiation following in vitro cell expansion. Ex vivo cultivated cells were seeded on a collagen scaffold and subsequently added to freshly created monocortical calvarial bone defects in 21 domestic pigs. Pure collagen scaffold served as a control defect. The animals were sacrificed at specific time points and de novo bone formation was quantitatively analyzed by histomorphometry. Bone volume/total defect volume (BV/TV) and the mineralization rate of newly formed bone were compared among the groups. In the early stages of wound healing, up to 30 days, the test defects did not show better bone regeneration than those in the control defect, but the bone healing process in the test defects was accelerated in the later stage compared to those in the control defect. All the test defects showed complete osseous healing after 90 days compared to those in the control defect. During the observation period, no significant differences in BV/TV and mineralization of newly formed bone among the test defects were observed. Irrespective of the tissue sources of MSC, the speed and pattern of osseous healing after cell transplantations into monocortical bone defects were comparable. Our results indicate that the efficiency of autologous AD-MSC, PD-MSC and BM-MSC transplantation following ex vivo cell expansion is not significantly different for the guided regeneration of bone defects.

  17. Building bone tissue: matrices and scaffolds in physiology and biotechnology

    Directory of Open Access Journals (Sweden)

    Riminucci M.

    2003-01-01

    Full Text Available Deposition of bone in physiology involves timed secretion, deposition and removal of a complex array of extracellular matrix proteins which appear in a defined temporal and spatial sequence. Mineralization itself plays a role in dictating and spatially orienting the deposition of matrix. Many aspects of the physiological process are recapitulated in systems of autologous or xenogeneic transplantation of osteogenic precursor cells developed for tissue engineering or modeling. For example, deposition of bone sialoprotein, a member of the small integrin-binding ligand, N-linked glycoprotein family, represents the first step of bone formation in ectopic transplantation systems in vivo. The use of mineralized scaffolds for guiding bone tissue engineering has revealed unexpected manners in which the scaffold and cells interact with each other, so that a complex interplay of integration and disintegration of the scaffold ultimately results in efficient and desirable, although unpredictable, effects. Likewise, the manner in which biomaterial scaffolds are "resorbed" by osteoclasts in vitro and in vivo highlights more complex scenarios than predicted from knowledge of physiological bone resorption per se. Investigation of novel biomaterials for bone engineering represents an essential area for the design of tissue engineering strategies.

  18. Effect of the “protein diet” and bone tissue.

    Science.gov (United States)

    Nascimento da Silva, Zoraide; Azevedo de Jesuz, Vanessa; De Salvo Castro, Eduardo; Soares da Costa, Carlos Alberto; Teles Boaventura, Gilson; Blondet de Azeredo, Vilma

    2014-01-01

    The aim of this study is to evaluate the effect of the hyperproteic diet consumption on bone tissue. The study was conducted during sixty days. Twenty eight Wistar albinus rats, adults, originated from Laboratory of Experimental Nutrition were divided in four groups: (n = 7); Control 1 (C1), Control 2 (C2), Hyperproteic 1 (HP1) e Hyperproteic 2 (HP2). The C2 and HP2 groups were submitted to 30% of food restriction. The hyperproteic diet was based on the Atkins diet and prepared to simulate the protein diet. At the end of the study the animals were anesthetized to performer bone densitometry analyses by DEXA and blood and tissue collection. Serum and bone minerals analyses were conducted by colorimetric methods in automated equipment. The total bone mineral density (BMD) of the pelvis and the spine of the food restriction groups (HP2 e C2) were lower (p hyperproteic groups (HP1 e HP2). It was observed similar effect on the osteocalcin level, that presented lower (p hyperproteic groups. The insulin level was lower only in HP2 and serum calcium of the HP1 and HP2 groups was lower than C1. The protein diet promotes significant bone change on femur and in the hormones levels related to bone synthesis and maintenance of this tissue.

  19. Evaluation of bone substitute materials: comparison of flat-panel based volume CT to conventional multidetector CT.

    Science.gov (United States)

    Sauerbier, Sebastian; Duttenhoefer, Fabian; Sachlos, Elefterios; Haberstroh, Jörg; Scheifele, Christian; Wrbas, Karl-Thomas; Voss, Pit Jacob; Veigel, Egle; Smedek, Jörg; Ganter, Philip; Tuna, Taskin; Gutwald, Ralf; Palmowski, Moritz

    2013-10-01

    Over the last decade tissue engineering has emerged as a key factor in bone regeneration within the field of cranio-maxillofacial surgery. Despite this in vivo analysis of tissue-engineered-constructs to monitor bone rehabilitation are difficult to conduct. Novel high-resolving flat-panel based volume CTs (fp-VCT) are increasingly used for imaging bone structures. This study compares the potential value of novel fp-VCT with conventional multidetector CT (MDCT) based on a sheep sinus floor elevation model. Calcium-hydroxyapatite reinforced collagen scaffolds were populated with autologous osteoblasts and implanted into sheep maxillary sinus. After 8, 16 and 24 weeks MDCT and fp-VCT scans were performed to investigate the volume of the augmented area; densities of cancellous and compact bone were assessed as comparative values. fp-VCT imaging resulted in higher spatial resolution, which was advantageous when separating closely related anatomical structures (i.e. trabecular and compact bone, biomaterials). Fp-VCT facilitated imaging of alterations occurring in test specimens over time. fp-VCTs therefore displayed high volume coverage, dynamic imaging potential and superior performance when investigating superfine bone structures and bone remodelling of biomaterials. Thus, fp-VCTs may be a suitable instrument for intraoperative imaging and future in vivo tissue-engineering studies.

  20. In vivo cyclic loading as a potent stimulatory signal for bone formation inside tissue engineering scaffold

    Directory of Open Access Journals (Sweden)

    A Roshan-Ghias

    2010-02-01

    Full Text Available In clinical situations, bone defects are often located at load bearing sites. Tissue engineering scaffolds are future bone substitutes and hence they will be subjected to mechanical stimulation. The goal of this study was to test if cyclic loading can be used as stimulatory signal for bone formation in a bone scaffold. Poly(L-lactic acid (PLA/ 5% beta-tricalcium phosphate (beta-TCP scaffolds were implanted in both distal femoral epiphyses of eight rats. Right knees were stimulated (10N, 4Hz, 5 min five times, every two days, starting from the third day after surgery while left knees served as control. Finite element study of the in vivo model showed that the strain applied to the scaffold is similar to physiological strains. Using micro-computed tomography (CT, all knees were scanned five times after the surgery and the related bone parameters of the newly formed bone were quantified. Statistical modeling was used to estimate the evolution of these parameters as a function of time and loading. The results showed that mechanical stimulation had two effects on bone volume (BV: an initial decrease in BV at week 2, and a long-term increase in the rate of bone formation by 28%. At week 13, the BV was then significantly higher in the loaded scaffolds.

  1. Bones - joints - soft tissues II. 7. rev. ed. Knochen - Gelenke - Weichteile II

    Energy Technology Data Exchange (ETDEWEB)

    Dihlmann, W. (Roentgeninstitut, Allgemeines Krankenhaus Barmbek, Hamburg (Germany)); Frommhold, W. (Radiologische Klinik, Tuebingen Univ. (Germany)) (eds.)

    1991-01-01

    With the publication of the 2nd part to Volume VI, 'Bones - joints - soft tissues', the 7th edition of 'Diagnostic radiology in the hospital and medical practice' is complete. The advances made particularly during the past decade in the field of diagnostic radiology have made it neccesary for all the individual sections to be completely revised. Recently developed methods of imaging like sonography, computed tomography and magnetic resonance tomography are increasingly used as a replacement for or, at least, an adjunct to conventional X-ray procedures. Owing to the development and continuous refinement of related methods of intervention the gap between mere diagnostic applications and therapeutic uses of radiology could eventually be closed. The issues mainly discussed in this volume are bone fractures and healing, bone transplantation, osteopathy and osteoarthropathy, fibrous dyplasia or Albright's disease, Pagetoid osteitis, genetically transmitted constitutional disorders of the skeleton and soft tissue changes. While in the key sections on bone fractures and healing, osteopathy and osteoarthropathy as well as constitutional genetic disorders X-ray techniques are still described as the prevailing method of diagnosis, diseases of soft tissues now are much more commonly diagnosed using magnetic resonance imaging. (orig./MG) With 2248 figs., 59 tabs.

  2. Multiscale patterned transplantable stem cell patches for bone tissue regeneration.

    Science.gov (United States)

    Kim, Jangho; Bae, Won-Gyu; Choung, Han-Wool; Lim, Ki Taek; Seonwoo, Hoon; Jeong, Hoon Eui; Suh, Khap-Yang; Jeon, Noo Li; Choung, Pill-Hoon; Chung, Jong Hoon

    2014-11-01

    Stem cell-based therapy has been proposed as an enabling alternative not only for the treatment of diseases but also for the regeneration of tissues beyond complex surgical treatments or tissue transplantation. In this study, we approached a conceptual platform that can integrate stem cells into a multiscale patterned substrate for bone regeneration. Inspired by human bone tissue, we developed hierarchically micro- and nanopatterned transplantable patches as synthetic extracellular matrices by employing capillary force lithography in combination with a surface micro-wrinkling method using a poly(lactic-co-glycolic acid) (PLGA) polymer. The multiscale patterned PLGA patches were highly flexible and showed higher tissue adhesion to the underlying tissue than did the single nanopatterned patches. In response to the anisotropically multiscale patterned topography, the adhesion and differentiation of human mesenchymal stem cells (hMSCs) were sensitively controlled. Furthermore, the stem cell patch composed of hMSCs and transplantable PLGA substrate promoted bone regeneration in vivo when both the micro- and nanotopography of the substrate surfaces were synergistically combined. Thus, our study concludes that multiscale patterned transplantable stem cell patches may have a great potential for bone regeneration as well as for various regenerative medicine approaches.

  3. Design, Materials, and Mechanobiology of Biodegradable Scaffolds for Bone Tissue Engineering

    Science.gov (United States)

    Velasco, Marco A.; Narváez-Tovar, Carlos A.; Garzón-Alvarado, Diego A.

    2015-01-01

    A review about design, manufacture, and mechanobiology of biodegradable scaffolds for bone tissue engineering is given. First, fundamental aspects about bone tissue engineering and considerations related to scaffold design are established. Second, issues related to scaffold biomaterials and manufacturing processes are discussed. Finally, mechanobiology of bone tissue and computational models developed for simulating how bone healing occurs inside a scaffold are described. PMID:25883972

  4. Design, materials, and mechanobiology of biodegradable scaffolds for bone tissue engineering.

    Science.gov (United States)

    Velasco, Marco A; Narváez-Tovar, Carlos A; Garzón-Alvarado, Diego A

    2015-01-01

    A review about design, manufacture, and mechanobiology of biodegradable scaffolds for bone tissue engineering is given. First, fundamental aspects about bone tissue engineering and considerations related to scaffold design are established. Second, issues related to scaffold biomaterials and manufacturing processes are discussed. Finally, mechanobiology of bone tissue and computational models developed for simulating how bone healing occurs inside a scaffold are described.

  5. Bone Marrow Adipose Tissue: To Be or Not To Be a Typical Adipose Tissue?

    Science.gov (United States)

    Hardouin, Pierre; Rharass, Tareck; Lucas, Stéphanie

    2016-01-01

    Bone marrow adipose tissue (BMAT) emerges as a distinct fat depot whose importance has been proved in the bone-fat interaction. Indeed, it is well recognized that adipokines and free fatty acids released by adipocytes can directly or indirectly interfere with cells of bone remodeling or hematopoiesis. In pathological states, such as osteoporosis, each of adipose tissues - subcutaneous white adipose tissue (WAT), visceral WAT, brown adipose tissue (BAT), and BMAT - is differently associated with bone mineral density (BMD) variations. However, compared with the other fat depots, BMAT displays striking features that makes it a substantial actor in bone alterations. BMAT quantity is well associated with BMD loss in aging, menopause, and other metabolic conditions, such as anorexia nervosa. Consequently, BMAT is sensed as a relevant marker of a compromised bone integrity. However, analyses of BMAT development in metabolic diseases (obesity and diabetes) are scarce and should be, thus, more systematically addressed to better apprehend the bone modifications in that pathophysiological contexts. Moreover, bone marrow (BM) adipogenesis occurs throughout the whole life at different rates. Following an ordered spatiotemporal expansion, BMAT has turned to be a heterogeneous fat depot whose adipocytes diverge in their phenotype and their response to stimuli according to their location in bone and BM. In vitro, in vivo, and clinical studies point to a detrimental role of BM adipocytes (BMAs) throughout the release of paracrine factors that modulate osteoblast and/or osteoclast formation and function. However, the anatomical dissemination and the difficulties to access BMAs still hamper our understanding of the relative contribution of BMAT secretions compared with those of peripheral adipose tissues. A further characterization of the phenotype and the functional regulation of BMAs are ever more required. Based on currently available data and comparison with other fat tissues

  6. Bone Tissue Engineering Challenges in Oral & Maxillofacial Surgery.

    Science.gov (United States)

    Smith, Brandon T; Shum, Jonathan; Wong, Mark; Mikos, Antonios G; Young, Simon

    2015-01-01

    Over the past decades, there has been a substantial amount of innovation and research into tissue engineering and regenerative approaches for the craniofacial region. This highly complex area presents many unique challenges for tissue engineers. Recent research indicates that various forms of implantable biodegradable scaffolds may play a beneficial role in the clinical treatment of craniofacial pathological conditions. Additionally, the direct delivery of bioactive molecules may further increase de novo bone formation. While these strategies offer an exciting glimpse into potential future treatments, there are several challenges that still must be overcome. In this chapter, we will highlight both current surgical approaches for craniofacial reconstruction and recent advances within the field of bone tissue engineering. The clinical challenges and limitations of these strategies will help contextualize and inform future craniofacial tissue engineering strategies.

  7. Gene therapy for cartilage and bone tissue engineering

    CERN Document Server

    Hu, Yu-Chen

    2014-01-01

    "Gene Therapy for Cartilage and Bone Tissue Engineering" outlines the tissue engineering and possible applications of gene therapy in the field of biomedical engineering as well as basic principles of gene therapy, vectors and gene delivery, specifically for cartilage and bone engineering. It is intended for tissue engineers, cell therapists, regenerative medicine scientists and engineers, gene therapist and virologists. Dr. Yu-Chen Hu is a Distinguished Professor at the Department of Chemical Engineering, National Tsing Hua University and has received the Outstanding Research Award (National Science Council), Asia Research Award (Society of Chemical Engineers, Japan) and Professor Tsai-Teh Lai Award (Taiwan Institute of Chemical Engineers). He is also a fellow of the American Institute for Medical and Biological Engineering (AIMBE) and a member of the Tissue Engineering International & Regenerative Medicine Society (TERMIS)-Asia Pacific Council.

  8. Porcine Bone Scaffolds Adsorb Growth Factors Secreted by MSCs and Improve Bone Tissue Repair

    Directory of Open Access Journals (Sweden)

    Eitan Mijiritsky

    2017-09-01

    Full Text Available An ideal tissue-engineered bone graft should have both excellent pro-osteogenesis and pro-angiogenesis properties to rapidly realize the bone regeneration in vivo. To meet this goal, in this work a porcine bone scaffold was successfully used as a Trojan horse to store growth factors produced by mesenchymal stem cells (MSCs. This new scaffold showed a time-dependent release of bioactive growth factors, such as vascular endothelial growth factor (VEGF and basic fibroblast growth factor (bFGF, in vitro. The biological effect of the growth factors-adsorbed scaffold on the in vitro commitment of MSCs into osteogenic and endothelial cell phenotypes has been evaluated. In addition, we have investigated the activity of growth factor-impregnated granules in the repair of critical-size defects in rat calvaria by means of histological, immunohistochemical, and molecular biology analyses. Based on the results of our work bone tissue formation and markers for bone and vascularization were significantly increased by the growth factor-enriched bone granules after implantation. This suggests that the controlled release of active growth factors from porcine bone granules can enhance and promote bone regeneration.

  9. Mechanochemical synthesis evaluation of nanocrystalline bone-derived bioceramic powder using for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Amirsalar Khandan

    2014-01-01

    Full Text Available Introduction: Bone tissue engineering proposes a suitable way to regenerate lost bones. Different materials have been considered for use in bone tissue engineering. Hydroxyapatite (HA is a significant success of bioceramics as a bone tissue repairing biomaterial. Among different bioceramic materials, recent interest has been risen on fluorinated hydroxyapatites, (FHA, Ca 10 (PO 4 6 F x (OH 2−x . Fluorine ions can promote apatite formation and improve the stability of HA in the biological environments. Therefore, they have been developed for bone tissue engineering. The aim of this study was to synthesize and characterize the FHA nanopowder via mechanochemical (MC methods. Materials and Methods: Natural hydroxyapatite (NHA 95.7 wt.% and calcium fluoride (CaF 2 powder 4.3 wt.% were used for synthesis of FHA. MC reaction was performed in the planetary milling balls using a porcelain cup and alumina balls. Ratio of balls to reactant materials was 15:1 at 400 rpm rotation speed. The structures of the powdered particles formed at different milling times were evaluated by X-ray diffraction (XRD, scanning electron microscopy (SEM and transmission electron microscopy (TEM. Results: Fabrication of FHA from natural sources like bovine bone achieved after 8 h ball milling with pure nanopowder. Conclusion: F− ion enhances the crystallization and mechanical properties of HA in formation of bone. The produced FHA was in nano-scale, and its crystal size was about 80-90 nm with sphere distribution in shape and size. FHA powder is a suitable biomaterial for bone tissue engineering.

  10. Evaluation of bone tissue reaction in laser beamed implants

    Energy Technology Data Exchange (ETDEWEB)

    Allegrini, Sergio, E-mail: sergiojr@usp.br [Graduate Program in Biodentistry, Ibirapuera University (UNIB), São Paulo, SP, 04661 100 (Brazil); Yoshimoto, Marcelo [Graduate Program in Biodentistry, Ibirapuera University (UNIB), São Paulo, SP, 04661 100 (Brazil); Salles, Marcos Barbosa [Department of Oral and Maxillofacial Surgery, Nove de Julho University (UNINOVE), São Paulo, SP, 02117 010 (Brazil); Allegrini, Marcia Rivellino Facci [São Paulo Fire Department (SPFD) of the Militar Police, Dentistry Section, São Paulo, SP, 01018 001 (Brazil); Pistarini, Luciana Crepaldi Yazawa; Braga, Francisco Jose Correa; Bressiani, Ana Helena de Almeida [Nuclear and Energy Research Institute – IPEN/USP, São Paulo, SP, 05508 900 (Brazil)

    2014-07-01

    The purpose of this study was to evaluate alterations and bone tissue response on laser treated implant surfaces (Nd:YAG – 100 W). Sixty grade II titanium (ASTM F67) mini-implants (1.5 mm × 4.0 mm) were installed in femurs of 30 Wistar rats. The animals were divided into two groups: thirty mini-implants were machined elements (Machined Group) and the other thirty had laser beamed surfaces (Laser Group). The animals were subdivided into three groups, according to bone healing periods of 15, 30 and 60 days. The samples were analyzed under light, scanning electron and confocal 3D microscopy as well as by EDS (energy dispersive spectroscopy) and Student's t test was used for statistical analyses. Light microscopy results showed new bone trabeculae formation toward laser-treated implants at 15 days’ bone repair as well as thin layers of osteoid matrix, indicating high biocompatibility. Similar features were observed in the Machined Group but only after 30 days. Bone/implant contact was better evidenced on laser-treated surfaces compared to that on simply machined implants. The only group that demonstrated change in level of significance was the laser-treated group at the 15-day-healing period (p < 0.05). Higher oxygen concentration possibly provides more efficient response of osteoblasts during new bone tissue deposition. Implant treated surfaces altered by laser beaming, their composition, surface topography and surface energy may be the future scene in implant dentistry.

  11. Template-Mediated Biomineralization for Bone Tissue Engineering.

    Science.gov (United States)

    Leiendecker, Alexander; Witzleben, Steffen; Schulze, Margit; Tobiasch, Edda

    2017-01-01

    Template-mediated mineralization describes a research field of materials chemistry that deals with templates influencing product formation of foremost inorganic functional materials and composites. These templates are usually organic compounds - as far as molecules with natural origin are involved, the terminology "biomineralization" or "biomimetic mineralization: is used. The present review gives insight into recent developments in the research area of bone-tissue engineering with focus on chemical templates and cell-based approaches. The review is structured as follows: (1) a brief general overview about the principle of templating and recently used template materials, (2) important analytical methods, (3) examples of template-guided mineralization of various bone-related materials, (4) natural bone mineralization, (5) scaffolds for bone-tissue regeneration and (6) cell-based therapeutic approaches. For this purpose, a literature screening with emphasis on promising potential practical applications was performed. In particular, macromolecular structures and polymer composites with relation to naturally occurring compounds were favored. Priority was given to publications of the last five years. Although the present review does not cover the whole topic to full extent, it should provide information about current trends and the most promising approaches in the research area of bone-tissue engineering based on applications of organic templates/scaffolds as well as cell-based strategies. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  12. A mathematical model for bone tissue regeneration inside a specific type of scaffold.

    Science.gov (United States)

    Sanz-Herrera, J A; Garcia-Aznar, J M; Doblare, M

    2008-10-01

    Bone tissue regeneration using scaffolds is receiving an increasing interest in orthopedic surgery and tissue engineering applications. In this study, we present the geometrical characterization of a specific family of scaffolds based on a face cubic centered (FCC) arrangement of empty pores leading to analytical formulae of porosity and specific surface. The effective behavior of those scaffolds, in terms of mechanical properties and permeability, is evaluated through the asymptotic homogenization theory applied to a representative volume element identified with the unit cell FCC. Bone growth into the scaffold is estimated by means of a phenomenological model that considers a macroscopic effective stress as the mechanical stimulus that regulates bone formation. Cell migration within the scaffold is modeled as a diffusion process based on Fick's law which allows us to estimate the cell invasion into the scaffold microstructure. The proposed model considers that bone growth velocity is proportional to the concentration of cells and regulated by the mechanical stimulus. This model allows us to explore what happens within the scaffold, the surrounding bone and their interaction. The mathematical model has been numerically implemented and qualitatively compared with previous experimental results found in the literature for a scaffold implanted in the femoral condyle of a rabbit. Specifically, the model predicts around 19 and 23% of bone regeneration for non-grafted and grafted scaffolds, respectively, both with an initial porosity of 76%.

  13. Biomechanical Models and Experi ments in Bone Tissue Engineering

    Institute of Scientific and Technical Information of China (English)

    Christian; ODDOU; Julien; PIERRE; Karim; OUDINA; Hervé; PETITE

    2005-01-01

    1 IntroductionThe understanding of the interactions between convective and diffusive phenomena of fluid dynamics origin, on the one side, associate reactive effects of biochemical nature, on the other, is a fundamental challenge and key problem in the context of bone tissue engineering. From the mastering of the complex biological phenomena related to the substrate degradation and remodelling of the extra cellular matrix that take place during the in vitro tissue culturing processes using cell seeded implan...

  14. Prevalence, extension and characteristics of fluid-fluid levels in bone and soft tissue tumors

    Energy Technology Data Exchange (ETDEWEB)

    Dyck, P. van; Venstermans, C.; Gielen, J.; Parizel, P.M. [University Hospital Antwerp, Department of Radiology, Edegem (Belgium); Vanhoenacker, F.M. [University Hospital Antwerp, Department of Radiology, Edegem (Belgium); AZ St-Maarten, Department of Radiology, Duffel/Mechelen (Belgium); Vogel, J. [Leiden University Medical Centre, Department of Orthopedics, Leiden (Netherlands); Kroon, H.M.; Bloem, J.L. [Leiden University Medical Centre, Department of Radiology, Leiden (Netherlands); Schepper, A.M.A. de [University Hospital Antwerp, Department of Radiology, Edegem (Belgium); Leiden University Medical Centre, Department of Radiology, Leiden (Netherlands)

    2006-12-15

    The purpose of this study was to determine the prevalence, extension and signal characteristics of fluid-fluid levels in a large series of 700 bone and 700 soft tissue tumors. Out of a multi-institutional database, MRI of 700 consecutive patients with a bone tumor and MRI of 700 consecutive patients with a soft tissue neoplasm were retrospectively reviewed for the presence of fluid-fluid levels. Extension (single, multiple and proportion of the lesion occupied by fluid-fluid levels) and signal characteristics on magnetic resonance imaging of fluid-fluid levels were determined. In all patients, pathologic correlation was available. Of 700 patients with a bone tumor, 19 (10 male and 9 female; mean age, 29 years) presented with a fluid-fluid level (prevalence 2.7%). Multiple fluid-fluid levels occupying at least one half of the total volume of the lesion were found in the majority of patients. Diagnoses included aneurysmal bone cyst (ten cases), fibrous dysplasia (two cases), osteoblastoma (one case), simple bone cyst (one case), telangiectatic osteosarcoma (one case), ''brown tumor'' (one case), chondroblastoma (one case) and giant cell tumor (two cases). Of 700 patients with a soft tissue tumor, 20 (9 males and 11 females; mean age, 34 years) presented with a fluid-fluid level (prevalence 2.9%). Multiple fluid-fluid levels occupying at least one half of the total volume of the lesion were found in the majority of patients. Diagnoses included cavernous hemangioma (12 cases), synovial sarcoma (3 cases), angiosarcoma (1 case), aneurysmal bone cyst of soft tissue (1 case), myxofibrosarcoma (1 case) and high-grade sarcoma ''not otherwise specified'' (2 cases). In our series, the largest reported in the literature to the best of our knowledge, the presence of fluid-fluid levels is a rare finding with a prevalence of 2.7 and 2.9% in bone and soft tissue tumors, respectively. Fluid-fluid levels remain a non-specific finding and can

  15. Quantitative polarized Raman spectroscopy in highly turbid bone tissue

    Science.gov (United States)

    Raghavan, Mekhala; Sahar, Nadder D.; Wilson, Robert H.; Mycek, Mary-Ann; Pleshko, Nancy; Kohn, David H.; Morris, Michael D.

    2010-05-01

    Polarized Raman spectroscopy allows measurement of molecular orientation and composition and is widely used in the study of polymer systems. Here, we extend the technique to the extraction of quantitative orientation information from bone tissue, which is optically thick and highly turbid. We discuss multiple scattering effects in tissue and show that repeated measurements using a series of objectives of differing numerical apertures can be employed to assess the contributions of sample turbidity and depth of field on polarized Raman measurements. A high numerical aperture objective minimizes the systematic errors introduced by multiple scattering. We test and validate the use of polarized Raman spectroscopy using wild-type and genetically modified (oim/oim model of osteogenesis imperfecta) murine bones. Mineral orientation distribution functions show that mineral crystallites are not as well aligned (p0.05). We provide evidence that simultaneous quantitative measurements of mineral and collagen orientations on intact bone specimens are possible using polarized Raman spectroscopy.

  16. Biomechanical study of the bone tissue with dental implants interaction

    Directory of Open Access Journals (Sweden)

    Navrátil P.

    2011-12-01

    Full Text Available The article deals with the stress-strain analysis of human mandible in the physiological state and after the dental implant application. The evaluation is focused on assessing of the cancellous bone tissue modeling-level. Three cancellous bone model-types are assessed: Non-trabecular model with homogenous isotropic material, nontrabecular model with inhomogeneous material obtained from computer tomography data using CT Data Analysis software, and trabecular model built from mandible section image. Computational modeling was chosen as the most suitable solution method and the solution on two-dimensional level was carried out. The results show that strain is more preferable value than stress in case of evaluation of mechanical response in cancellous bone. The non-trabecular model with CT-obtained material model is not acceptable for stress-strain analysis of the cancellous bone for singularities occurring on interfaces of regions with different values of modulus of elasticity.

  17. Effect of the "protein diet" and bone tissue

    Directory of Open Access Journals (Sweden)

    Zoraide Nascimento da Silva

    2014-01-01

    Full Text Available The aim of this study is to evaluate the effect of the hyperproteic diet consumption on bone tissue. Methods: The study was conducted during sixty days. Twenty eight Wistar albinus rats, adults, originated from Laboratory of Experimental Nutrition were divided in four groups: (n = 7; Control 1 (C1, Control 2 (C2, Hyperproteic 1 (HP1 e Hyperproteic 2 (HP2. The C2 and HP2 groups were submitted to 30% of food restriction. The hyperproteic diet was based on the Atkins diet and prepared to simulate the protein diet. At the end of the study the animals were anesthetized to performer bone densitometry analyses by DEXA and blood and tissue collection. Serum and bone minerals analyses were conducted by colorimetric methods in automated equipment. Results: The total bone mineral density (BMD of the pelvis and the spine of the food restriction groups (HP2 e C2 were lower (p < 0.05 than C1 e HP1 groups. While the femur BMD of the HP2 was lower (p < 0.05 related to others groups. It had been observed reduction (p < 0.05 in the medium point of the width of femur diaphysis and in bone calcium level in the hyperproteic groups (HP1 e HP2. It was observed similar effect on the osteocalcin level, that presented lower (p < 0.05 in the hyperproteic groups. The insulin level was lower only in HP2 and serum calcium of the HP1 and HP2 groups was lower than C1. Conclusion: The protein diet promotes significant bone change on femur and in the hormones levels related to bone synthesis and maintenance of this tissue.

  18. The effect of bone displacement operations on facial soft tissues.

    Science.gov (United States)

    Habib, Ali; Hisham, Ahmed

    2013-01-01

    A novel biomechanical model for face soft tissue (skin, mucosa, and muscles) is introduced to investigate the effect of mandible and chin bone displacement on the overall appearance of the patient's face. Nonlinear FE analysis is applied to the model and the results obtained are used to help surgeons to decide the amount of displacement required.

  19. QUANTIFICATION OF TISSUE PROPERTIES IN SMALL VOLUMES

    Energy Technology Data Exchange (ETDEWEB)

    J. MOURANT; ET AL

    2000-12-01

    The quantification of tissue properties by optical measurements will facilitate the development of noninvasive methods of cancer diagnosis and detection. Optical measurements are sensitive to tissue structure which is known to change during tumorigenesis. The goals of the work presented in this paper were to verify that the primary scatterers of light in cells are structures much smaller than the nucleus and then to develop an optical technique that can quantify parameters of structures the same size as the scattering features in cells. Polarized, elastic back-scattering was found to be able to quantify changes in scattering properties for turbid media consisting of scatterers of the size found in tissue.

  20. Efficient biomarkers for the characterization of bone tissue.

    Science.gov (United States)

    Gil, J E; Aranda, J P; Mérida-Casermeiro, E; Ujaldón, M

    2012-12-01

    This work describes an expert system aimed to an accurate classification of cell tissue on microscopic images coming from studies of bone tissue regeneration from stem cells. We analyze a wide number of phenotype and color issues to build effective vectors of features for the subsequent characterization of tissue into five different classes: bone, cartilage, muscle, fiber and spine. The features selection includes texture, shape and color descriptors, among which we consider color histograms, Zernike moments and circular parameters. Once a preliminary set of vectors candidates are selected, several trained and non-parametric classifiers based on neural networks, decision trees, Bayesian classifiers and association rules are analyzed, and later compared with unsupervised methods to determine those that fit more closely to our needs for distinguishing bone tissue. Because of the high resolution of our biomedical images, we effectively decompose them into smaller windows for a faster execution, with the impact of the window size being discussed in terms of speed and robustness. Our final study compares accuracy and computational time together with different stainings for revealing tissue properties: Picrosirius red, alcian blue and safranin blue. Overall, safranin blue reveals as the best staining and multilayer perceptron as the most effective classifier.

  1. Wide-field Raman imaging for bone detection in tissue.

    Science.gov (United States)

    Papour, Asael; Kwak, Jin Hee; Taylor, Zach; Wu, Benjamin; Stafsudd, Oscar; Grundfest, Warren

    2015-10-01

    Inappropriate bone growth in soft tissue can occur after trauma to a limb and can cause a disruption to the healing process. This is known as Heterotopic Ossification (HO) in which regions in the tissue start to mineralize and form microscopic bone-like structures. These structures continue to calcify and develop into large, non-functional bony masses that cause pain, limit limb movement, and expose the tissue to reoccurring infections; in the case of open wounds this can lead to amputation as a result of a failed wound. Both Magnetic Resonance Imaging (MRI) and X-ray imaging have poor sensitivity and specificity for the detection of HO, thus delaying therapy and leading to poor patient outcomes. We present a low-power, fast (1 frame per second) optical Raman imaging system with a large field of view (1 cm(2)) that can differentiate bone tissue from soft tissue without spectroscopy, this in contrast to conventional Raman microscopy systems. This capability may allow for the development of instrumentation which permits bedside diagnosis of HO.

  2. Immature muscular tissue differentiation into bone-like tissue by bone morphogenetic proteins in vitro, with ossification potential in vivo.

    Science.gov (United States)

    Hayashi, Tatsuhide; Kobayashi, Syuichiro; Asakura, Masaki; Kawase, Mayu; Ueno, Atsuko; Uematsu, Yasuaki; Kawai, Tatsushi

    2014-09-01

    The objective of this study was to induce bone formation from immature muscular tissue (IMT) in vitro, using bone morphogenetic proteins (BMPs) as a cytokine source and an expanded polytetrafluoroethylene (ePTFE) scaffold. In addition, cultured IMTs were implanted subcutaneously into Sprague-Dawley (SD) rats to determine their in vivo ossification potential. BMPs, extracted from bovine cortical bones, were applied to embryonic SD rat IMT cultures, before 2 weeks culture on ePTFE scaffolds. Osteoblast-like cells and osteoid tissues were partially identified by hematoxylin-eosin staining 2 weeks after culture. Collagen type I (Col-I), osteopontin (OP), and osteocalcin (OC) were detected in the osteoid tissues by immunohistochemical staining. OC gene expression remained low, but OP and Col-I were upregulated during the culture period. In vivo implanted IMTs showed slight radiopacity 1 week after implantation and strong radiopacity 2 and 3 weeks after implantation. One week after implantation, migration of numerous capillaries was observed and ossification was detected after 2 weeks by histological observation. These results suggest that IMTs are able to differentiate into bone-like tissue in vitro, with an ossification potential after implantation in vivo.

  3. Tissue engineering bone using autologous progenitor cells in the peritoneum.

    Directory of Open Access Journals (Sweden)

    Jinhui Shen

    Full Text Available Despite intensive research efforts, there remains a need for novel methods to improve the ossification of scaffolds for bone tissue engineering. Based on a common phenomenon and known pathological conditions of peritoneal membrane ossification following peritoneal dialysis, we have explored the possibility of regenerating ossified tissue in the peritoneum. Interestingly, in addition to inflammatory cells, we discovered a large number of multipotent mesenchymal stem cells (MSCs in the peritoneal lavage fluid from mice with peritoneal catheter implants. The osteogenic potential of these peritoneal progenitor cells was demonstrated by their ability to easily infiltrate decalcified bone implants, produce osteocalcin and form mineralized bone in 8 weeks. Additionally, when poly(l-lactic acid scaffolds loaded with bone morphogenetic protein-2 (a known osteogenic differentiation agent were implanted into the peritoneum, signs of osteogenesis were seen within 8 weeks of implantation. The results of this investigation support the concept that scaffolds containing BMP-2 can stimulate the formation of bone in the peritoneum via directed autologous stem and progenitor cell responses.

  4. Microscale Material Properties of Bone and the Mineralized Tissues of the Intervertebral Disc-Vertebral Body Interface

    Science.gov (United States)

    Paietta, Rachel C.

    The objective of this dissertation is to understand the influences of material structure on the properties, function and failure of biological connective tissues. Biological interfaces are becoming an increasingly studied system within mechanics and tissue engineering as a model for attaching dissimilar materials. The elastic modulus of bone (≈ 20 GPa) and cartilage (≈ 0.1-1 MPa) differ over orders of magnitude, which should intuitively create high stress concentrations and failure at the interface. Yet, these natural interface systems rarely fail in vivo, and the mechanism by which loads are transferred between tissues has not yet been established. Tissue quality is one major contributor to the mechanical behavior of bone and cartilage, and is defined by properties such as collagen orientation, mineral volume fraction, porosity and tissue geometry. These properties have yet to be established at the bone-cartilage interface in the spine, and the lack of quantitative data on material microstructure and behavior limits treatments and tissue engineering construct design. In this dissertation, second harmonic generation imaging, quantitative backscattered scanning electron imaging and nanoindentation are combined to characterize micrometer scale tissue quality and modulus in both bone and calcified cartilage. These techniques are utilized to: 1) determine the hierarchical micrometer to millimeter scale properties of lamellar bone, 2) quantify changes throughout development and aging at the human intervertebral disc-vertebral body junction, and 3) explore compressive fractures at this interface. This work is the first to provide quantitative data on the mineral volume fraction, collagen orientation and modulus from the same, undecalcified sections of tissue to corroborate tissue structure and mineralization and describe quantitative parameters of the interface. The principal findings from this work indicate that the underlying matrix, or collagen, organization in

  5. Perfusion systems that minimize vascular volume fraction in engineered tissues.

    Science.gov (United States)

    Truslow, James G; Tien, Joe

    2011-06-01

    This study determines the optimal vascular designs for perfusing engineered tissues. Here, "optimal" describes a geometry that minimizes vascular volume fraction (the fractional volume of a tissue that is occupied by vessels) while maintaining oxygen concentration above a set threshold throughout the tissue. Computational modeling showed that optimal geometries depended on parameters that affected vascular fluid transport and oxygen consumption. Approximate analytical expressions predicted optima that agreed well with the results of modeling. Our results suggest one basis for comparing the effectiveness of designs for microvascular tissue engineering.

  6. Imaging of alkaline phosphatase activity in bone tissue.

    Directory of Open Access Journals (Sweden)

    Terence P Gade

    Full Text Available The purpose of this study was to develop a paradigm for quantitative molecular imaging of bone cell activity. We hypothesized the feasibility of non-invasive imaging of the osteoblast enzyme alkaline phosphatase (ALP using a small imaging molecule in combination with (19Flourine magnetic resonance spectroscopic imaging ((19FMRSI. 6, 8-difluoro-4-methylumbelliferyl phosphate (DiFMUP, a fluorinated ALP substrate that is activatable to a fluorescent hydrolysis product was utilized as a prototype small imaging molecule. The molecular structure of DiFMUP includes two Fluorine atoms adjacent to a phosphate group allowing it and its hydrolysis product to be distinguished using (19Fluorine magnetic resonance spectroscopy ((19FMRS and (19FMRSI. ALP-mediated hydrolysis of DiFMUP was tested on osteoblastic cells and bone tissue, using serial measurements of fluorescence activity. Extracellular activation of DiFMUP on ALP-positive mouse bone precursor cells was observed. Concurringly, DiFMUP was also activated on bone derived from rat tibia. Marked inhibition of the cell and tissue activation of DiFMUP was detected after the addition of the ALP inhibitor levamisole. (19FMRS and (19FMRSI were applied for the non-invasive measurement of DiFMUP hydrolysis. (19FMRS revealed a two-peak spectrum representing DiFMUP with an associated chemical shift for the hydrolysis product. Activation of DiFMUP by ALP yielded a characteristic pharmacokinetic profile, which was quantifiable using non-localized (19FMRS and enabled the development of a pharmacokinetic model of ALP activity. Application of (19FMRSI facilitated anatomically accurate, non-invasive imaging of ALP concentration and activity in rat bone. Thus, (19FMRSI represents a promising approach for the quantitative imaging of bone cell activity during bone formation with potential for both preclinical and clinical applications.

  7. [Distribution of compact bone mesenchymal stem cells in lung tissue and bone marrow of mouse].

    Science.gov (United States)

    Wang, Rui-Ping; Wu, Ren-Na; Guo, Yu-Qing; Zhang, Bin; Chen, Hu

    2014-02-01

    This study was aimed to investigate the distribution of compact bone mesenchymal stem cells(MSC) marked with lentiviral plasmid pGC FU-RFP-LV in lung tissue and bone marrow of mouse. The MSC were infected by lentivirus with infection efficiency 78%, the infected MSC were injected into BALB/c mice via tail veins in concentration of 1×10(6) /mouse. The mice were randomly divided into 4 group according to 4 time points as 1, 2, 5 and 7 days. The lung tissue and bone marrow were taken and made of frozen sections and smears respectively in order to observed the distributions of MSC. The results indicated that the lentiviral infected MSC displayed phenotypes and biological characteristics which conformed to MSC by immunophenotyping analysis and induction differentiation detection. After the MSC were infected with optimal viral titer MOI = 50, the cell growth no significantly changed; the fluorescent microscopy revealed that the distributions of MSC in bone marrow on day 1, 2, 5 and 7 were 0.50 ± 0.20, 0.67 ± 0.23, 0.53 ± 0.14, 0.33 ± 0.16; those in lung tissue were 0.55 ± 0.15, 0.47 ± 0.13, 0.29 ± 0.13, 0.26 ± 0.08. It is concluded that the distribution of MSC in lung tissue reaches a peak on day 1, while distribution of MSC in bone marrow reaches a peak on day 2. The distribution of mouse MSC relates with RFP gene expression and implantation of MSC in lung tissue and bone marrow.

  8. Effect of Ankaferd Blood Stopper on Early Bone Tissue Healing in ...

    African Journals Online (AJOL)

    on bone healing; in fact, ABS increases inflammation in vivo. Keywords: Ankaferd blood stopper, Wound healing, Mineralized bone tissue, Inflammatory cell infiltration, Osteoid tissue, Tooth ... rodent diet ad libitum. All procedures were.

  9. Comparison of the relationship between bone marrow adipose tissue and volumetric bone mineral density in children and adults.

    Science.gov (United States)

    Shen, Wei; Velasquez, Gilbert; Chen, Jun; Jin, Ye; Heymsfield, Steven B; Gallagher, Dympna; Pi-Sunyer, F Xavier

    2014-01-01

    Several large-scale studies have reported the presence of an inverse relationship between bone mineral density (BMD) and bone marrow adipose tissue (BMAT) in adults. We aim to determine if there is an inverse relationship between pelvic volumetric BMD (vBMD) and pelvic BMAT in children and to compare this relationship in children and adults. Pelvic BMAT and bone volume (BV) was evaluated in 181 healthy children (5-17yr) and 495 healthy adults (≥18yr) with whole-body magnetic resonance imaging (MRI). Pelvic vBMD was calculated using whole-body dual-energy X-ray absorptiometry to measure pelvic bone mineral content and MRI-measured BV. An inverse correlation was found between pelvic BMAT and pelvic vBMD in both children (r=-0.374, pBMAT as the independent variable, being a child or adult neither significantly contribute to the pelvic BMD (p=0.995) nor did its interaction with pelvic BMAT (p=0.415). The inverse relationship observed between pelvic vBMD and pelvic BMAT in children extends previous findings that found the inverse relationship to exist in adults and provides further support for a reciprocal relationship between adipocytes and osteoblasts.

  10. Tissue engineered humanized bone supports human hematopoiesis in vivo.

    Science.gov (United States)

    Holzapfel, Boris M; Hutmacher, Dietmar W; Nowlan, Bianca; Barbier, Valerie; Thibaudeau, Laure; Theodoropoulos, Christina; Hooper, John D; Loessner, Daniela; Clements, Judith A; Russell, Pamela J; Pettit, Allison R; Winkler, Ingrid G; Levesque, Jean-Pierre

    2015-08-01

    Advances in tissue-engineering have resulted in a versatile tool-box to specifically design a tailored microenvironment for hematopoietic stem cells (HSCs) in order to study diseases that develop within this setting. However, most current in vivo models fail to recapitulate the biological processes seen in humans. Here we describe a highly reproducible method to engineer humanized bone constructs that are able to recapitulate the morphological features and biological functions of the HSC niches. Ectopic implantation of biodegradable composite scaffolds cultured for 4 weeks with human mesenchymal progenitor cells and loaded with rhBMP-7 resulted in the development of a chimeric bone organ including a large number of human mesenchymal cells which were shown to be metabolically active and capable of establishing a humanized microenvironment supportive of the homing and maintenance of human HSCs. A syngeneic mouse-to-mouse transplantation assay was used to prove the functionality of the tissue-engineered ossicles. We predict that the ability to tissue engineer a morphologically intact and functional large-volume bone organ with a humanized bone marrow compartment will help to further elucidate physiological or pathological interactions between human HSCs and their native niches. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  11. A sugar-based phase-transitioning delivery system for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    TL Cheng

    2013-10-01

    Full Text Available Bone tissue engineering approaches commonly involve the delivery of recombinant human bone morphogenetic proteins (rhBMPs. However, there are limitations associated with the currently used carriers, including the need for surgical implantation and the associated increase in infection risk. As an alternative to traditional porous collagen sponge, we have adopted a solution of the injectable sucrose acetate isobutyrate (SAIB as a carrier for rhBMP-2. The ability to deliver rhBMP-2 and other agents by injection reduces the infection risk and lesion size whilst in surgery, with the potential to avoid open surgery altogether in some indications.The primary methodology used for this in vivo study was a C57BL6/J mouse ectopic bone formation model. Specimens were examined by x-ray, microCT, and histology at 3 weeks. SAIB was delivered non-invasively and produced up to 3-fold greater bone volume compared to collagen. To further refine and improve upon the formulation, SAIB containing rhBMP-2 was admixed with candidate compounds including ceramic microparticles, anti-resorptives, and cell signalling inhibitors and further tested in vivo. The formulation combining SAIB/rhBMP-2, the bisphosphonate zoledronic acid (ZA, and hydroxyapatite (HA microparticles yielded a 10-fold greater bone volume than SAIB/rhBMP-2 alone. To investigate the mechanism underlying the synergy between ZA and HA, we used in vitro binding assays and in vivo fluorescent biodistribution studies to demonstrate that ceramic particles could bind and sequester the bisphosphonate. These data show the utility of SAIB as a non-invasive rhBMP delivery system as well as describing an optimised formulation for bone tissue engineering.

  12. The chorioallantoic membrane (CAM) assay for the study of human bone regeneration: a refinement animal model for tissue engineering.

    Science.gov (United States)

    Moreno-Jiménez, Inés; Hulsart-Billstrom, Gry; Lanham, Stuart A; Janeczek, Agnieszka A; Kontouli, Nasia; Kanczler, Janos M; Evans, Nicholas D; Oreffo, Richard Oc

    2016-08-31

    Biomaterial development for tissue engineering applications is rapidly increasing but necessitates efficacy and safety testing prior to clinical application. Current in vitro and in vivo models hold a number of limitations, including expense, lack of correlation between animal models and human outcomes and the need to perform invasive procedures on animals; hence requiring new predictive screening methods. In the present study we tested the hypothesis that the chick embryo chorioallantoic membrane (CAM) can be used as a bioreactor to culture and study the regeneration of human living bone. We extracted bone cylinders from human femoral heads, simulated an injury using a drill-hole defect, and implanted the bone on CAM or in vitro control-culture. Micro-computed tomography (μCT) was used to quantify the magnitude and location of bone volume changes followed by histological analyses to assess bone repair. CAM blood vessels were observed to infiltrate the human bone cylinder and maintain human cell viability. Histological evaluation revealed extensive extracellular matrix deposition in proximity to endochondral condensations (Sox9+) on the CAM-implanted bone cylinders, correlating with a significant increase in bone volume by μCT analysis (p < 0.01). This human-avian system offers a simple refinement model for animal research and a step towards a humanized in vivo model for tissue engineering.

  13. The chorioallantoic membrane (CAM) assay for the study of human bone regeneration: a refinement animal model for tissue engineering

    Science.gov (United States)

    Moreno-Jiménez, Inés; Hulsart-Billstrom, Gry; Lanham, Stuart A.; Janeczek, Agnieszka A.; Kontouli, Nasia; Kanczler, Janos M.; Evans, Nicholas D.; Oreffo, Richard Oc

    2016-08-01

    Biomaterial development for tissue engineering applications is rapidly increasing but necessitates efficacy and safety testing prior to clinical application. Current in vitro and in vivo models hold a number of limitations, including expense, lack of correlation between animal models and human outcomes and the need to perform invasive procedures on animals; hence requiring new predictive screening methods. In the present study we tested the hypothesis that the chick embryo chorioallantoic membrane (CAM) can be used as a bioreactor to culture and study the regeneration of human living bone. We extracted bone cylinders from human femoral heads, simulated an injury using a drill-hole defect, and implanted the bone on CAM or in vitro control-culture. Micro-computed tomography (μCT) was used to quantify the magnitude and location of bone volume changes followed by histological analyses to assess bone repair. CAM blood vessels were observed to infiltrate the human bone cylinder and maintain human cell viability. Histological evaluation revealed extensive extracellular matrix deposition in proximity to endochondral condensations (Sox9+) on the CAM-implanted bone cylinders, correlating with a significant increase in bone volume by μCT analysis (p < 0.01). This human-avian system offers a simple refinement model for animal research and a step towards a humanized in vivo model for tissue engineering.

  14. Bone geometry in response to long-term tennis playing and its relationship with muscle volume: a quantitative magnetic resonance imaging study in tennis players.

    Science.gov (United States)

    Ducher, G; Courteix, D; Même, S; Magni, C; Viala, J F; Benhamou, C L

    2005-10-01

    The benefit of impact-loading activity for bone strength depends on whether the additional bone mineral content (BMC) accrued at loaded sites is due to an increased bone size, volumetric bone mineral density (vBMD) or both. Using magnetic resonance imaging (MRI) and dual energy X-ray absorptiometry (DXA), the aim of this study was to characterize the geometric changes of the dominant radius in response to long-term tennis playing and to assess the influence of muscle forces on bone tissue by investigating the muscle-bone relationship. Twenty tennis players (10 men and 10 women, mean age: 23.1+/-4.7 years, with 14.3+/-3.4 years of playing) were recruited. The total bone volume, cortical volume, sub-cortical volume and muscle volume were measured at both distal radii by MRI. BMC was assessed by DXA and was divided by the total bone volume to derive vBMD. Grip strength was evaluated with a dynamometer. Significant side-to-side differences (P<0.0001) were found in muscle volume (+9.7%), grip strength (+13.3%), BMC (+13.5%), total bone volume (+10.3%) and sub-cortical volume (+20.6%), but not in cortical volume (+2.6%, ns). The asymmetry in total bone volume explained 75% of the variance in BMC asymmetry (P<0.0001). vBMD was slightly higher on the dominant side (+3.3%, P<0.05). Grip strength and muscle volume correlated with all bone variables (except vBMD) on both sides (r=0.48-0.86, P<0.05-0.0001) but the asymmetries in muscle parameters did not correlate with those in bone parameters. After adjustment for muscle volume or grip strength, BMC was still greater on the dominant side. This study showed that the greater BMC induced by long-term tennis playing at the dominant radius was associated to a marked increase in bone size and a slight improvement in volumetric BMD, thereby improving bone strength. In addition to the muscle contractions, other mechanical stimuli seemed to exert a direct effect on bone tissue, contributing to the specific bone response to tennis

  15. Scaling of Haversian canal surface area to secondary osteon bone volume in ribs and limb bones.

    Science.gov (United States)

    Skedros, John G; Knight, Alex N; Clark, Gunnar C; Crowder, Christian M; Dominguez, Victoria M; Qiu, Shijing; Mulhern, Dawn M; Donahue, Seth W; Busse, Björn; Hulsey, Brannon I; Zedda, Marco; Sorenson, Scott M

    2013-06-01

    Studies of secondary osteons in ribs have provided a great deal of what is known about remodeling dynamics. Compared with limb bones, ribs are metabolically more active and sensitive to hormonal changes, and receive frequent low-strain loading. Optimization for calcium exchange in rib osteons might be achieved without incurring a significant reduction in safety factor by disproportionally increasing central canal size with increased osteon size (positive allometry). By contrast, greater mechanical loads on limb bones might favor reducing deleterious consequences of intracortical porosity by decreasing osteon canal size with increased osteon size (negative allometry). Evidence of this metabolic/mechanical dichotomy between ribs and limb bones was sought by examining relationships between Haversian canal surface area (BS, osteon Haversian canal perimeter, HC.Pm) and bone volume (BV, osteonal wall area, B.Ar) in a broad size range of mature (quiescent) osteons from adult human limb bones and ribs (modern and medieval) and various adult and subadult non-human limb bones and ribs. Reduced major axis (RMA) and least-squares (LS) regressions of HC.Pm/B.Ar data show that rib and limb osteons cannot be distinguished by dimensional allometry of these parameters. Although four of the five rib groups showed positive allometry in terms of the RMA slopes, nearly 50% of the adult limb bone groups also showed positive allometry when negative allometry was expected. Consequently, our results fail to provide clear evidence that BS/BV scaling reflects a rib versus limb bone dichotomy whereby calcium exchange might be preferentially enhanced in rib osteons.

  16. Characterization of an ovine bilateral critical sized bone defect iliac wing model to examine treatment modalities based on bone tissue engineering.

    Science.gov (United States)

    Lansdowne, Jennifer L; Devine, Declan; Eberli, Ursula; Emans, Pieter; Welting, Tim J M; Odekerken, Jim C E; Schiuma, Damiano; Thalhauser, Martin; Bouré, Ludovic; Zeiter, Stephan

    2014-01-01

    Critical sized bone defect (CSBD) animal models are used to evaluate and confirm efficacy and potency of new treatment modalities based on bone tissue engineering before the latter can be applied in clinical practice. In this study, a bilateral CSBD model in the iliac wings of sheep is described in detail. To demonstrate that this is a large animal CSBD model in sheep, bone healing within the defect left empty (negative control) or filled with autologous corticocancellous bone graft (clinical gold standard, positive control) was assessed using micro-CT, histology, histomorphometric, and fluorochrome analysis. After three months, new bone into the defect site was formed across the whole defect in the positive controls but limited to the edge of the defects in the negative controls. Bone volume in the positive controls was statistically higher than in the negative controls, with the latter having less than 10% new bone growth. There were no intraoperative or postoperative complications. The model described here represents a reliable and reproducible bilateral CSBD in sheep with low morbidity that can be used for in vivo evaluation of new treatment modalities based on bone tissue engineering.

  17. Characterization of an Ovine Bilateral Critical Sized Bone Defect Iliac Wing Model to Examine Treatment Modalities Based on Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Jennifer L. Lansdowne

    2014-01-01

    Full Text Available Critical sized bone defect (CSBD animal models are used to evaluate and confirm efficacy and potency of new treatment modalities based on bone tissue engineering before the latter can be applied in clinical practice. In this study, a bilateral CSBD model in the iliac wings of sheep is described in detail. To demonstrate that this is a large animal CSBD model in sheep, bone healing within the defect left empty (negative control or filled with autologous corticocancellous bone graft (clinical gold standard, positive control was assessed using micro-CT, histology, histomorphometric, and fluorochrome analysis. After three months, new bone into the defect site was formed across the whole defect in the positive controls but limited to the edge of the defects in the negative controls. Bone volume in the positive controls was statistically higher than in the negative controls, with the latter having less than 10% new bone growth. There were no intraoperative or postoperative complications. The model described here represents a reliable and reproducible bilateral CSBD in sheep with low morbidity that can be used for in vivo evaluation of new treatment modalities based on bone tissue engineering.

  18. Preparation of laponite bioceramics for potential bone tissue engineering applications.

    Directory of Open Access Journals (Sweden)

    Chuanshun Wang

    Full Text Available We report a facile approach to preparing laponite (LAP bioceramics via sintering LAP powder compacts for bone tissue engineering applications. The sintering behavior and mechanical properties of LAP compacts under different temperatures, heating rates, and soaking times were investigated. We show that LAP bioceramic with a smooth and porous surface can be formed at 800°C with a heating rate of 5°C/h for 6 h under air. The formed LAP bioceramic was systematically characterized via different methods. Our results reveal that the LAP bioceramic possesses an excellent surface hydrophilicity and serum absorption capacity, and good cytocompatibility and hemocompatibility as demonstrated by resazurin reduction assay of rat mesenchymal stem cells (rMSCs and hemolytic assay of pig red blood cells, respectively. The potential bone tissue engineering applicability of LAP bioceramic was explored by studying the surface mineralization behavior via soaking in simulated body fluid (SBF, as well as the surface cellular response of rMSCs. Our results suggest that LAP bioceramic is able to induce hydroxyapatite deposition on its surface when soaked in SBF and rMSCs can proliferate well on the LAP bioceramic surface. Most strikingly, alkaline phosphatase activity together with alizarin red staining results reveal that the produced LAP bioceramic is able to induce osteoblast differentiation of rMSCs in growth medium without any inducing factors. Finally, in vivo animal implantation, acute systemic toxicity test and hematoxylin and eosin (H&E-staining data demonstrate that the prepared LAP bioceramic displays an excellent biosafety and is able to heal the bone defect. Findings from this study suggest that the developed LAP bioceramic holds a great promise for treating bone defects in bone tissue engineering.

  19. Preparation of laponite bioceramics for potential bone tissue engineering applications.

    Science.gov (United States)

    Wang, Chuanshun; Wang, Shige; Li, Kai; Ju, Yaping; Li, Jipeng; Zhang, Yongxing; Li, Jinhua; Liu, Xuanyong; Shi, Xiangyang; Zhao, Qinghua

    2014-01-01

    We report a facile approach to preparing laponite (LAP) bioceramics via sintering LAP powder compacts for bone tissue engineering applications. The sintering behavior and mechanical properties of LAP compacts under different temperatures, heating rates, and soaking times were investigated. We show that LAP bioceramic with a smooth and porous surface can be formed at 800°C with a heating rate of 5°C/h for 6 h under air. The formed LAP bioceramic was systematically characterized via different methods. Our results reveal that the LAP bioceramic possesses an excellent surface hydrophilicity and serum absorption capacity, and good cytocompatibility and hemocompatibility as demonstrated by resazurin reduction assay of rat mesenchymal stem cells (rMSCs) and hemolytic assay of pig red blood cells, respectively. The potential bone tissue engineering applicability of LAP bioceramic was explored by studying the surface mineralization behavior via soaking in simulated body fluid (SBF), as well as the surface cellular response of rMSCs. Our results suggest that LAP bioceramic is able to induce hydroxyapatite deposition on its surface when soaked in SBF and rMSCs can proliferate well on the LAP bioceramic surface. Most strikingly, alkaline phosphatase activity together with alizarin red staining results reveal that the produced LAP bioceramic is able to induce osteoblast differentiation of rMSCs in growth medium without any inducing factors. Finally, in vivo animal implantation, acute systemic toxicity test and hematoxylin and eosin (H&E)-staining data demonstrate that the prepared LAP bioceramic displays an excellent biosafety and is able to heal the bone defect. Findings from this study suggest that the developed LAP bioceramic holds a great promise for treating bone defects in bone tissue engineering.

  20. Efficacy of Honeycomb TCP-induced Microenvironment on Bone Tissue Regeneration in Craniofacial Area.

    Science.gov (United States)

    Watanabe, Satoko; Takabatake, Kiyofumi; Tsujigiwa, Hidetsugu; Watanabe, Toshiyuki; Tokuyama, Eijiro; Ito, Satoshi; Nagatsuka, Hitoshi; Kimata, Yoshihiro

    2016-01-01

    Artificial bone materials that exhibit high biocompatibility have been developed and are being widely used for bone tissue regeneration. However, there are no biomaterials that are minimally invasive and safe. In a previous study, we succeeded in developing honeycomb β-tricalcium phosphate (β-TCP) which has through-and-through holes and is able to mimic the bone microenvironment for bone tissue regeneration. In the present study, we investigated how the difference in hole-diameter of honeycomb β-TCP (hole-diameter: 75, 300, 500, and 1600 μm) influences bone tissue regeneration histologically. Its osteoconductivity was also evaluated by implantation into zygomatic bone defects in rats. The results showed that the maximum bone formation was observed on the β-TCP with hole-diameter 300μm, included bone marrow-like tissue and the pattern of bone tissue formation similar to host bone. Therefore, the results indicated that we could control bone tissue formation by creating a bone microenvironment provided by β-TCP. Also, in zygomatic bone defect model with honeycomb β-TCP, the result showed there was osseous union and the continuity was reproduced between the both edges of resected bone and β-TCP, which indicated the zygomatic bone reproduction fully succeeded. It is thus thought that honeycomb β-TCP may serve as an excellent biomaterial for bone tissue regeneration in the head, neck and face regions, expected in clinical applications.

  1. Massive osteoradionecrosis of facial bones and soft tissues.

    Science.gov (United States)

    Benlier, E; Alicioglu, B; Kocak, Z; Yurdakul-Sikar, E; Top, H

    2009-01-01

    Osteoradionecrosis (ORN) is one of the most serious and uncommon complications in head and neck irradiation for cancer. It is defined as a combination of necrotic soft tissue and bone not being able to heal spontaneously, it demonstrates a general resistance to antibiotics and requires conservative surgical management. Even with modern radiation therapy, its incidence is highly unpredictable and varies between 4-30%. We report on a patient with a huge open cavitation in the cheek, communicating with the mouth and extending to contralateral periodontal gingival and temporal fossa. He had been treated with radiation therapy for nasopharyngeal cancer 5 years ago and presented with restriction of the opening of the mouth. Osteonecrosis complicated with osteomyelitis was evident in bilateral mandible and maxillary bones and the temporal bone. The ramus of the mandible and zygomatic arc were resected, subtotal maxillectomy was performed and the defect was repaired by a free double island flap from the scapular and parascapular osteocutaneous latissimus dorsi muscle flap supplied by subscapular artery. To our knowledge, this is the most extensive bone and soft tissue destruction due to radiation reported in the literature.

  2. Biodegradable Materials for Bone Repair and Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Zeeshan Sheikh

    2015-08-01

    Full Text Available This review discusses and summarizes the recent developments and advances in the use of biodegradable materials for bone repair purposes. The choice between using degradable and non-degradable devices for orthopedic and maxillofacial applications must be carefully weighed. Traditional biodegradable devices for osteosynthesis have been successful in low or mild load bearing applications. However, continuing research and recent developments in the field of material science has resulted in development of biomaterials with improved strength and mechanical properties. For this purpose, biodegradable materials, including polymers, ceramics and magnesium alloys have attracted much attention for osteologic repair and applications. The next generation of biodegradable materials would benefit from recent knowledge gained regarding cell material interactions, with better control of interfacing between the material and the surrounding bone tissue. The next generations of biodegradable materials for bone repair and regeneration applications require better control of interfacing between the material and the surrounding bone tissue. Also, the mechanical properties and degradation/resorption profiles of these materials require further improvement to broaden their use and achieve better clinical results.

  3. Novel Scaffolds Fabricated Using Oleuropein for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Hui Fan

    2014-01-01

    Full Text Available We investigated the feasibility of oleuropein as a cross-linking agent for fabricating three-dimensional (3D porous composite scaffolds for bone tissue engineering. Human-like collagen (HLC and nanohydroxyapatite (n-HAp were used to fabricate the composite scaffold by way of cross-linking. The mechanical tests revealed superior properties for the cross-linked scaffolds compared to the uncross-linked scaffolds. The as-obtained composite scaffold had a 3D porous structure with pores ranging from 120 to 300 μm and a porosity of 73.6±2.3%. The cross-linked scaffolds were seeded with MC3T3-E1 Subclone 14 mouse osteoblasts. Fluorescence staining, the Cell Counting Kit-8 (CCK-8 assay, and scanning electron microscopy (SEM indicated that the scaffolds enhanced cell adhesion and proliferation. Our results indicate the potential of these scaffolds for bone tissue engineering.

  4. Relation of Visceral and Subcutaneous Adipose Tissue to Bone Mineral Density in Chinese Women

    Directory of Open Access Journals (Sweden)

    Ling Wang

    2013-01-01

    Full Text Available The relationship between adipose and bone tissues is still being debated. The purpose of our study was to evaluate whether the distribution and volume of abdomen adipose tissue are correlated to trabecular bone mineral density in the lumbar spine. In this cross-sectional study, 320 Chinese women, being divided into two groups according to age ≥55 years and <55 years, were evaluated with quantitative computed tomography (QCT of the spine to simultaneously evaluate the average trabecular BMD of L2–L4, VAT, and SAT. Possible covariates of height, weight, age, and comorbidities were considered. In the <55-year-old sample, multiple linear regression analyses indicated that VAT volume was negatively correlated to trabecular BMD (P value = 0.0003 and SAT volume had no correlation to trabecular BMD. In contrast, there was no significant correlation between VAT or SAT and BMD in the ≥55-year-old sample. Our results indicate that high VAT volume is associated with low BMD in Chinese women aged <55 years and SAT has no relation with BMD.

  5. METABOLIC CHANGES OF CONNECTIVE TISSUE IN CHILDREN WITH BONE CYST

    Directory of Open Access Journals (Sweden)

    O. M. Magomedov

    2013-10-01

    Full Text Available The results of the study of diagnostically important metabolism parameters in patients with bone cysts in different stages of the disease are presented. It is shown that an increase activity of protein banding collagenase, alkaline phosphatase and also of hydroxyproline, glycosaminoglycans contents due to lower levels of calcium and inorganic phosphate levels increase in blood serum are expressed in a stage osteolysis than the step of separating. Decreasing the amount of glycosaminoglycans and collagen in bone indicates an intensification of catabolic processes in the connective tissue matrix. Diagnostically important indicators of the degree of disturbance of bone metabolism are the level of collagen, proteoglycans and activity of marker enzymes — collagenase and alkaline phosphatase. Based on the evaluation of sensitivity, specificity and diagnostic efficiency of the obtained results, we can recommend the threshold values of the investigated parameters of basic organic components and mineral metabolism of bone for the differential diagnosis of stages of bone cysts in children, which will serve as a basis for the development of appropriate diagnostic tests.

  6. The Pathology of Bone Tissue during Peri-Implantitis

    OpenAIRE

    Schminke, B.; vom Orde, F.; Gruber, R.; H Schliephake; Bürgers, R; Miosge, N

    2015-01-01

    Dental implants are one of the most frequently used treatment options for tooth replacement. Approximately 30% of patients with dental implants develop peri-implantitis, which is an oral inflammatory disease that leads to loss of the supporting tissues, predominately the bone. For the development of future therapeutic strategies, it is essential to understand the molecular pathophysiology of human dental peri-implant infections. Here, we describe the gene and protein expression patterns of pe...

  7. 3-Dimensional functionalized polycaprolactone-hyaluronic acid hydrogel constructs for bone tissue engineering.

    Science.gov (United States)

    Hamlet, Stephen M; Vaquette, Cedryck; Shah, Amit; Hutmacher, Dietmar W; Ivanovski, Saso

    2017-04-01

    Alveolar bone regeneration remains a significant clinical challenge in periodontology and dental implantology. This study assessed the mineralized tissue forming potential of 3-D printed medical grade polycaprolactone (mPCL) constructs containing osteoblasts (OB) encapsulated in a hyaluronic acid (HA)-hydrogel incorporating bone morphogenetic protein-7 (BMP-7). HA-hydrogels containing human OB ± BMP-7 were prepared. Cell viability, osteogenic gene expression, mineralized tissue formation and BMP-7 release in vitro, were assessed by fluorescence staining, RT-PCR, histological/μ-CT examination and ELISA respectively. In an athymic rat model, subcutaneous ectopic mineralized tissue formation in mPCL-hydrogel constructs was assessed by μ-CT and histology. Osteoblast encapsulation in HA-hydrogels did not detrimentally effect cell viability, and 3-D culture in osteogenic media showed mineralized collagenous matrix formation after 6 weeks. BMP-7 release from the hydrogel was biphasic, sustained and increased osteogenic gene expression in vitro. After 4 weeks in vivo, mPCL-hydrogel constructs containing BMP-7 formed significantly more volume (mm(3) ) of vascularized bone-like tissue. Functionalized mPCL-HA hydrogel constructs provide a favourable environment for bone tissue engineering. Although encapsulated cells contributed to mineralized tissue formation within the hydrogel in vitro and in vivo, their addition did not result in an improved outcome compared to BMP-7 alone. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  8. Exercise and Regulation of Bone and Collagen Tissue Biology

    DEFF Research Database (Denmark)

    Kjær, Michael; Jørgensen, Niklas Rye; Heinemeier, Katja Maria

    2015-01-01

    , and tolerable load within weeks, to a degree (30-40%) that mimics that of contractile skeletal musculature. This illustrates the importance of regular mechanical load in order to preserve the stabilizing role of the connective tissue for the overall function of the musculoskeletal system in both daily activity......The musculoskeletal system and its connective tissue include the intramuscular connective tissue, the myotendinous junction, the tendon, the joints with their cartilage and ligaments, and the bone; they all together play a crucial role in maintaining the architecture of the skeletal muscle......, ensuring force transmission, storing energy, protecting joint surface and stability, and ensuring the transfer of muscular forces into resulting limb movement. The musculoskeletal connective tissue structure is relatively stable, but mechanical loading and subsequent mechanotransduction and molecular...

  9. Thallium-201 scintigraphy for bone and soft tissue tumors

    Energy Technology Data Exchange (ETDEWEB)

    Tokuumi, Yuji; Tsuchiya, Hiroyuki; Sunayama, Chiaki; Matsuda, Eizo; Asada, Naohiro; Taki, Junichi; Sumiya, Hisashi; Miyauchi, Tsutomu; Tomita, Katsuro [Kanazawa Univ. (Japan). School of Medicine

    1995-05-01

    This study was undertaken to assess the usefulness of thallium-201 scintigraphy in bone and soft tissue tumors. Pre-therapy scintigraphy was undertaken in a total of 136 patients with histologically confirmed diagnosis, consisting of 74 with malignant bone and soft tissue tumors, 39 with benign ones, 12 with diseases analogous to tumors, and 11 others. Thallium activity was graded on a scale of 0-4: 0=background activity, 1=equivocal activity, 2=definitive activity, but less than myocardium, 3=definite activity equal to myocardium, and 4=activity greater than myocardium. In the group of malignant tumors, thallium-201 uptake was found in 80%, although it was low for chondrosarcoma (2/8) and malignant Schwannoma (one/3). The group of benign tumors, however, showed it in only 41%, being restricted to those with giant cell tumors, chondroblastoma, fibromatosis, and osteoid osteoma. Thallium-201 uptake was also found in all 8 patients with metastatic tumors. In 23 patients undergoing thallium imaging before and after chemotherapy, scintigraphic findings revealed a high correlation with histopathological findings. Thus, thallium-201 scintigraphy may be potentially used to distinguish malignant from benign bone and soft tissue tumors, except for a few histopathological cases, as well as to determine loco-regional metastases and response to chemotherapy. (N.K.).

  10. [Project to enhance bone bank tissue storage and distribution procedures].

    Science.gov (United States)

    Huang, Jui-Chen; Wu, Chiung-Lan; Chen, Chun-Chuan; Chen, Shu-Hua

    2011-10-01

    Organ and tissue transplantation are now commonly preformed procedures. Improper organ bank handling procedures may increase infection risks. Execution accuracy in terms of tissue storage and distribution at our bone bank was 80%. We thus proposed an execution improvement project to enhance procedures in order to fulfill the intent of donors and ensure recipient safety. This project was designed to raise nurse professionalism, and ensure patient safety through enhanced tissue storage and distribution procedures. Education programs developed for this project focus on teaching standard operating procedures for bone and ligament storage and distribution, bone bank facility maintenance, trouble shooting and solutions, and periodic inspection systems. Cognition of proper storage and distribution procedures rose from 81% to 100%; Execution accuracy also rose from 80% to 100%. The project successfully conveyed concepts essential to the correct execution of organ storage and distribution procedures and proper organ bank facility management. Achieving and maintaining procedural and management standards is crucial to continued organ donations and the recipient safety.

  11. Tissue Engineering and the Future of Facial Volumization.

    Science.gov (United States)

    Reuther, Marsha; Watson, Deborah

    2016-10-01

    Volume loss due to facial aging can be restored by facial volumization using a variety of materials. Volumization can be performed in isolation or concurrent with other facial rejuvenation procedures to obtain an optimal aesthetic result. There is a myriad of manufactured products available for volumization. The use of autologous fat as facial filler has been adopted more recently and possesses certain advantages; however, the ideal filler is still lacking. Tissue engineering may offer a solution. This technology would provide autologous soft-tissue components for use in facial volumization. The use of stem cells may enable customization of the engineered product for the specific needs of each patient. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  12. Mapping Bone Mineral Density Obtained by Quantitative Computed Tomography to Bone Volume Fraction

    Science.gov (United States)

    Pennline, James A.; Mulugeta, Lealem

    2017-01-01

    Methods for relating or mapping estimates of volumetric Bone Mineral Density (vBMD) obtained by Quantitative Computed Tomography to Bone Volume Fraction (BVF) are outlined mathematically. The methods are based on definitions of bone properties, cited experimental studies and regression relations derived from them for trabecular bone in the proximal femur. Using an experimental range of values in the intertrochanteric region obtained from male and female human subjects, age 18 to 49, the BVF values calculated from four different methods were compared to the experimental average and numerical range. The BVF values computed from the conversion method used data from two sources. One source provided pre bed rest vBMD values in the intertrochanteric region from 24 bed rest subject who participated in a 70 day study. Another source contained preflight vBMD values from 18 astronauts who spent 4 to 6 months on the ISS. To aid the use of a mapping from BMD to BVF, the discussion includes how to formulate them for purpose of computational modeling. An application of the conversions would be used to aid in modeling of time varying changes in vBMD as it relates to changes in BVF via bone remodeling and/or modeling.

  13. Decreased bone tissue mineralization can partly explain subchondral sclerosis observed in osteoarthritis.

    Science.gov (United States)

    Cox, L G E; van Donkelaar, C C; van Rietbergen, B; Emans, P J; Ito, K

    2012-05-01

    For many years, pharmaceutical therapies for osteoarthritis (OA) were focused on cartilage. However, it has been theorized that bone changes such as increased bone volume fraction and decreased bone matrix mineralization may play an important role in the initiation and pathogenesis of OA as well. The mechanisms behind the bone changes are subject of debate, and a better understanding may help in the development of bone-targeting OA therapies. In the literature, the increase in bone volume fraction has been hypothesized to result from mechanoregulated bone adaptation in response to decreased mineralization. Furthermore, both changes in bone volume fraction and mineralization have been reported to be highest close to the cartilage, and bone volume fraction has been reported to be correlated with cartilage degeneration. These data indicate that cartilage degeneration, bone volume fraction, and bone matrix mineralization may be related in OA. In the current study, we aimed to investigate the relationships between cartilage degeneration, bone matrix mineralization and bone volume fraction at a local level. With microCT, we determined bone matrix mineralization and bone volume fraction as a function of distance from the cartilage in osteochondral plugs from human OA tibia plateaus with varying degrees of cartilage degeneration. In addition, we evaluated whether mechanoregulated bone adaptation in response to decreased bone matrix mineralization may be responsible for the increase in bone volume fraction observed in OA. For this purpose, we used the experimentally obtained mineralization data as input for bone adaptation simulations. We simulated the effect of mechanoregulated bone adaptation in response to different degrees of mineralization, and compared the simulation results to the experimental data. We found that local changes in subchondral bone mineralization and bone volume fraction only occurred underneath severely degenerated cartilage, indicating that bone

  14. Effect of Combined Calcium Hydroxide and Accelerated Portland Cement on Bone Formation and Soft Tissue Healing in Dog Bone Lesions

    Directory of Open Access Journals (Sweden)

    Khorshidi H

    2015-09-01

    Full Text Available Statement of Problem: Recent literatures show that accelerated Portland cement (APC and calcium hydroxide Ca (OH2 may have the potential to promote the bone regeneration. However, certain clinical studies reveal consistency of Ca (OH2, as one of the practical drawbacks of the material when used alone. To overcome such inconvenience, the combination of the Ca (OH2 with a bone replacement material could offer a convenient solution. Objectives: To evaluate the soft tissue healing and bone regeneration in the periodontal intrabony osseous defects using accelerated Portland cement (APC in combination with calcium hydroxide Ca (OH2, as a filling material. Materials and Methods: Five healthy adult mongrel dogs aged 2-3 years old (approximately 20 kg in weight with intact dentition and healthy periodontium were selected for this study. Two one-wall defects in both mesial and distal aspects of the 3rd premolars of both sides of the mandible were created. Therefore, four defects were prepared in each dog. Three defects in each dog were randomly filled with one of the following materials: APC alone, APC mixed with Ca (OH2, and Ca (OH2 alone. The fourth defect was left empty (control. Upon clinical examination of the sutured sites, the amount of dehiscence from the adjacent tooth was measured after two and eight weeks, using a periodontal probe mesiodistally. For histometric analysis, the degree of new bone formation was estimated at the end of the eighth postoperative week, by a differential point-counting method. The percentage of the defect volume occupied by new osteoid or trabecular bone was recorded. Results: Measurement of wound dehiscence during the second week revealed that all five APCs had an exposure of 1-2 mm and at the end of the study all samples showed 3-4 mm exposure across the surface of the graft material, whereas the Ca (OH2, control, and APC + Ca (OH2 groups did not show any exposure at the end of the eighth week of the study. The most

  15. Quality Indices Of Jaw Bone Tissue In Screening Diagnostics Of Parodontal Diseases

    Directory of Open Access Journals (Sweden)

    V.P. Konev

    2009-12-01

    Full Text Available The objective of the work is to develop and motivate screening methods of the estimation of paradontal tissues by digital X-ray study. The used methods are X-ray digital scene with estimation of bone tissue density in program Trophy 2000, clinically anatomical parallels of bone tissue density and their qualitative indices. Parallels between qualitative indices of bones of mandibular alveolar process and bone tissue density of these areas have been revealed. It is reasonable to carry out the estimation of bone tissue density indices for revealing early stages of parodontal pathology

  16. Non-severe burn injury leads to depletion of bone volume that can be ameliorated by inhibiting TNF-α.

    Science.gov (United States)

    O'Halloran, Emily; Kular, Jasreen; Xu, Jiake; Wood, Fiona; Fear, Mark

    2015-05-01

    Bone loss after severe burn injury is well established, and is thought to be a consequence of the severe hyper-metabolic response as well as changes in cytokine and glucocorticoid levels that decrease bone synthesis and increase rate of loss. However, 90% of presentations are for non-severe burns which do not elicit this response. Little is known about whether these non-severe injuries may also affect bone tissue, and whether other mechanisms may be involved. To investigate whether bone loss occurs after a non-severe burn injury we used a mouse model of an approximately 8% total body surface area (TBSA) full-thickness burn and micro-CT. We also assessed whether blocking TNF-α after a burn injury by administration of an antibody could modulate the impacts of the burn on bone tissue. There was a significant loss of trabecular bone volume of (3.27% compared to 5.27%, p=0.0051) after non-severe burn injury. Trabecular number was significantly decreased (0.57/mm after injury compared to 1.02/mm controls, p=0.0051) and spacing increased after burn injury (0.40 compared to 0.28, p=0.0083). Anti-TNF-α antibodies significantly improved trabecular bone volume (8.53%, p=0.0034) and number after burn injury (1.28/mm, p=0.0034). There was no significant change observed in cortical bone after burn injury or administration of anti-TNF-α antibodies. These findings show that non-severe burn injury can lead to changes in bone metabolism. Monitoring bone density in patients with non-severe injuries and interventions to limit the impacts of the inflammatory storm may benefit patient recovery and outcomes.

  17. First cosmic-ray images of bone and soft tissue

    Science.gov (United States)

    Mrdja, Dusan; Bikit, Istvan; Bikit, Kristina; Slivka, Jaroslav; Hansman, Jan; Oláh, László; Varga, Dezső

    2016-11-01

    More than 120 years after Roentgen's first X-ray image, the first cosmic-ray muon images of bone and soft tissue are created. The pictures, shown in the present paper, represent the first radiographies of structures of organic origin ever recorded by cosmic rays. This result is achieved by a uniquely designed, simple and versatile cosmic-ray muon-imaging system, which consists of four plastic scintillation detectors and a muon tracker. This system does not use scattering or absorption of muons in order to deduct image information, but takes advantage of the production rate of secondaries in the target materials, detected in coincidence with muons. The 2D image slices of cow femur bone are obtained at several depths along the bone axis, together with the corresponding 3D image. Real organic soft tissue, polymethyl methacrylate and water, never seen before by any other muon imaging techniques, are also registered in the images. Thus, similar imaging systems, placed around structures of organic or inorganic origin, can be used for tomographic imaging using only the omnipresent cosmic radiation.

  18. Functional imaging of small tissue volumes with diffuse optical tomography

    Science.gov (United States)

    Klose, Alexander D.; Hielscher, Andreas H.

    2006-03-01

    Imaging of dynamic changes in blood parameters, functional brain imaging, and tumor imaging are the most advanced application areas of diffuse optical tomography (DOT). When dealing with the image reconstruction problem one is faced with the fact that near-infrared photons, unlike X-rays, are highly scattered when they traverse biological tissue. Image reconstruction schemes are required that model the light propagation inside biological tissue and predict measurements on the tissue surface. By iteratively changing the tissue-parameters until the predictions agree with the real measurements, a spatial distribution of optical properties inside the tissue is found. The optical properties can be related to the tissue oxygenation, inflammation, or to the fluorophore concentration of a biochemical marker. If the model of light propagation is inaccurate, the reconstruction process will lead to an inaccurate result as well. Here, we focus on difficulties that are encountered when DOT is employed for functional imaging of small tissue volumes, for example, in cancer studies involving small animals, or human finger joints for early diagnosis of rheumatoid arthritis. Most of the currently employed image reconstruction methods rely on the diffusion theory that is an approximation to the equation of radiative transfer. But, in the cases of small tissue volumes and tissues that contain low scattering regions diffusion theory has been shown to be of limited applicability Therefore, we employ a light propagation model that is based on the equation of radiative transfer, which promises to overcome the limitations.

  19. 3D conductive nanocomposite scaffold for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Shahini A

    2013-12-01

    Full Text Available Aref Shahini,1 Mostafa Yazdimamaghani,2 Kenneth J Walker,2 Margaret A Eastman,3 Hamed Hatami-Marbini,4 Brenda J Smith,5 John L Ricci,6 Sundar V Madihally,2 Daryoosh Vashaee,1 Lobat Tayebi2,7 1School of Electrical and Computer Engineering, Helmerich Advanced Technology Research Center, 2School of Chemical Engineering, 3Department of Chemistry, 4School of Mechanical and Aerospace Engineering, 5Department of Nutritional Sciences, Oklahoma State University, Stillwater, OK, USA; 6Department of Biomaterials and Biomimetics, New York University, New York, NY; 7School of Material Science and Engineering, Helmerich Advanced Technology Research Center, Oklahoma State University, Tulsa, OK, USA Abstract: Bone healing can be significantly expedited by applying electrical stimuli in the injured region. Therefore, a three-dimensional (3D ceramic conductive tissue engineering scaffold for large bone defects that can locally deliver the electrical stimuli is highly desired. In the present study, 3D conductive scaffolds were prepared by employing a biocompatible conductive polymer, ie, poly(3,4-ethylenedioxythiophene poly(4-styrene sulfonate (PEDOT:PSS, in the optimized nanocomposite of gelatin and bioactive glass. For in vitro analysis, adult human mesenchymal stem cells were seeded in the scaffolds. Material characterizations using hydrogen-1 nuclear magnetic resonance, in vitro degradation, as well as thermal and mechanical analysis showed that incorporation of PEDOT:PSS increased the physiochemical stability of the composite, resulting in improved mechanical properties and biodegradation resistance. The outcomes indicate that PEDOT:PSS and polypeptide chains have close interaction, most likely by forming salt bridges between arginine side chains and sulfonate groups. The morphology of the scaffolds and cultured human mesenchymal stem cells were observed and analyzed via scanning electron microscope, micro-computed tomography, and confocal fluorescent

  20. The enzyme profiles in the connective tissue attaching pin bones to the surrounding tissue is specific in farmed salmon (Salmo salar) and cod (Gadus morhua L.).

    Science.gov (United States)

    Vuong, Tram T; Rønning, Sissel B; Kolset, Svein O; Pedersen, Mona E

    2017-02-01

    Post mortem storage is a necessary process for removal of pin bones without destruction of fillets, thereby avoiding volume and economic loss. However, the enzymes involved in loosening pin bones during storage have not been studied to a great extent. In this study, the activities and localization of MMPs in the connective tissue (CT) of pin bones dissected from fillet of salmon and cod were investigated. Interestingly, the enzyme activity profile in these two species was different during post mortem storage of fish fillets. Adding MMP inhibitor (GM6001) and serine protease inhibitor (Pefabloc) revealed different effects in the two species, suggesting different regulations in salmon and cod. In situ zymography with the same inhibitors verified MMP and serine protease activity in CT close to pin bone at early post mortem (6 h) in salmon. However, MMP inhibition was not evident in cod in this area at that time point. Immunohistochemistry further revealed MMP9 and MMP13 were located more to the outer rim of CT, facing the pin bone and adipose tissue, while MMP7 was more randomly distributed within CT in salmon. In contrast, all these three MMPs were randomly distributed in CT in cod. In summary, our study reveals different MMP enzyme profiles in salmon and cod in the pin bone area, influenced by serine proteases, and suggests that MMPs and serine proteases must be taken in consideration when studying the conditions for early pin bone removal.

  1. Characterization of Bone Marrow Mononuclear Cells on Biomaterials for Bone Tissue Engineering In Vitro

    Directory of Open Access Journals (Sweden)

    Dirk Henrich

    2015-01-01

    Full Text Available Bone marrow mononuclear cells (BMCs are suitable for bone tissue engineering. Comparative data regarding the needs of BMC for the adhesion on biomaterials and biocompatibility to various biomaterials are lacking to a large extent. Therefore, we evaluated whether a surface coating would enhance BMC adhesion and analyze the biocompatibility of three different kinds of biomaterials. BMCs were purified from human bone marrow aspirate samples. Beta tricalcium phosphate (β-TCP, without coating or coated with fibronectin or human plasma, demineralized bone matrix (DBM, and bovine cancellous bone (BS were assessed. Seeding efficacy on β-TCP was 95% regardless of the surface coating. BMC demonstrated a significantly increased initial adhesion on DBM and β-TCP compared to BS. On day 14, metabolic activity was significantly increased in BMC seeded on DBM in comparison to BMC seeded on BS. Likewise increased VEGF-synthesis was observed on day 2 in BMC seeded on DBM when compared to BMC seeded on BS. The seeding efficacy of BMC on uncoated biomaterials is generally high although there are differences between these biomaterials. Beta-TCP and DBM were similar and both superior to BS, suggesting either as suitable materials for spatial restriction of BMC used for regenerative medicine purposes in vivo.

  2. Comparative study of cryopreserved bone tissue and tissue preserved in a 98% glycerol solution

    OpenAIRE

    GIOVANI, Arlete Mazzini Miranda; Croci, Alberto Tesconi; Oliveira,Cláudia Regina GCM; Filippi,Renée Zon; Santos, Luiz Augusto U.; Maragni,Graziela G; Albhy,Thays Moreira

    2006-01-01

    OBJECTIVE: To compare the bone graft cryopreservation method (at -80ºC) with a preservation method using a 98% glycerol solution at room temperature (10ºC-35ºC), by testing the antibacterial and fungal effects of 98% glycerol and comparatively analyzing the observed histological changes resulting from the use of both methods. METHOD: This study was of 30 samples of trabecular bone tissue from 10 patients undergoing total hip arthroplasty. Each femoral head provided 3 samples that were randomi...

  3. Evaluating differential nuclear DNA yield rates and osteocyte numbers among human bone tissue types: A synchrotron radiation micro-CT approach.

    Science.gov (United States)

    Andronowski, Janna M; Mundorff, Amy Z; Pratt, Isaac V; Davoren, Jon M; Cooper, David M L

    2017-05-01

    Molecular human identification has conventionally focused on DNA sampling from dense, weight-bearing cortical bone tissue, typically from femora or tibiae. A comparison of skeletal elements from three contemporary individuals demonstrated that elements with high quantities of cancellous bone yielded nuclear DNA at the highest rates, suggesting that preferentially sampling cortical bone may be suboptimal (Mundorff & Davoren, 2014). Despite these findings, the reason for the differential DNA yields between cortical and cancellous bone tissues remains unknown. The primary goal of this work is to ascertain whether differences in bone microstructure can be used to explain differential nuclear DNA yield among bone tissue types observed by Mundorff and Davoren (2014), with a focus on osteocytes and the three-dimensional (3D) quantification of their associated lacunae. Osteocytes and other bone cells are recognized to house DNA in bone tissue, thus examining the density of their lacunae may explain why nuclear DNA yield rates differ among bone tissue types. Lacunae were visualized and quantified using synchrotron radiation-based micro-Computed Tomographic imaging (SR micro-CT). Volumes of interest (VOIs) from cortical and cancellous bone tissues (n=129) were comparatively analyzed from the three skeletons sampled for Mundorff and Davoren's (2014) study. Analyses tested the primary hypothesis that the abundance and density of osteocytes (inferred from their lacunar spaces) vary between cortical and cancellous bone tissue types. Results demonstrated that osteocyte lacunar abundance and density vary between cortical and cancellous bone tissue types, with cortical bone VOIs containing a higher lacunar abundance and density. We found that the osteocyte lacunar density values are independent of nuclear DNA yield, suggesting an alternative explanation for the higher nuclear DNA yields from bones with greater quantities of cancellous bone tissue. The use of SR micro-CT allowed for

  4. Bone tissue engineering for spine fusion : An experimental study on ectopic and orthotopic implants in rats

    NARCIS (Netherlands)

    van Gaalen, SM; Dhert, WJA; van den Muysenberg, A; Oner, FC; van Blitterswijk, C; Verbout, AJ; de Bruijn, J.D.

    2004-01-01

    Alternatives to the use of autologous bone as a bone graft in spine surgery are needed. The purpose of this study was to examine tissue-engineered bone constructs in comparison with control scaffolds without cells in a posterior spinal implantation model in rats. Syngeneic bone marrow cells were cul

  5. Effect of the "protein diet" and bone tissue

    OpenAIRE

    Zoraide Nascimento da Silva; Vanessa Azevedo de Jesuz; Eduardo de Salvo Castro; Carlos Alberto Soares da Costa; Gilson Teles Boaventura; Vilma Blondet de Azeredo

    2014-01-01

    The aim of this study is to evaluate the effect of the hyperproteic diet consumption on bone tissue. Methods: The study was conducted during sixty days. Twenty eight Wistar albinus rats, adults, originated from Laboratory of Experimental Nutrition were divided in four groups: (n = 7); Control 1 (C1), Control 2 (C2), Hyperproteic 1 (HP1) e Hyperproteic 2 (HP2). The C2 and HP2 groups were submitted to 30% of food restriction. The hyperproteic diet was based on the Atkins diet and prepared to si...

  6. The relationships among total body fat, bone mineral content and bone marrow adipose tissue in early-pubertal girls.

    Science.gov (United States)

    L Newton, Anna; J Hanks, Lynae; Davis, Michelle; Casazza, Krista

    2013-01-01

    Investigation of the physiologic relevance of bone marrow adipose tissue (BMAT) during growth may promote understanding of the bone-fat axis and confluence with metabolic factors. The objective of this pilot investigation was two-fold: (1) to evaluate the relationships among total body fat, bone mineral content (BMC) and femoral BMAT during childhood and underlying metabolic determinants and (2) to determine if the relationships differ by race. Participants included white and non-Hispanic black girls (n=59) ages 4-10 years. Femoral BMAT volume was measured by magnetic resonance imaging, BMC and body fat by dual-energy X-ray absorptiometry. Metabolic parameters were assessed in the fasted state. Total fat and BMC were positively associated with BMAT; however, simultaneous inclusion of BMC and body fat in the statistical model attenuated the association between BMC and BMAT. Differences in BMAT volume were observed, non-Hispanic black girls exhibiting marginally greater BMAT at age eight (P=0.05) and white girls exhibiting greater BMAT at age ten (PBMAT and leptin (P=0.02) and adiponectin (P=0.002) in white girls while BMAT and insulin were inversely related in non-Hispanic black girls (P=0.008). Our findings revealed a positive relationship between BMAT, body fat and BMC, although body fat, respective to leptin, contributed partly to the relationship between BMAT and BMC. Despite large differences in total fat between non-Hispanic black and white, the relationship between BMAT and BMC was similar to white girls. However, this relationship appeared to be impacted through different mechanisms according to race.

  7. Chitosan-Alginate Biocomposite Containing Fucoidan for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Jayachandran Venkatesan

    2014-01-01

    Full Text Available Over the last few years, significant research has been conducted in the construction of artificial bone scaffolds. In the present study, different types of polymer scaffolds, such as chitosan-alginate (Chi-Alg and chitosan-alginate with fucoidan (Chi-Alg-fucoidan, were developed by a freeze-drying method, and each was characterized as a bone graft substitute. The porosity, water uptake and retention ability of the prepared scaffolds showed similar efficacy. The pore size of the Chi-Alg and Chi-Alg-fucoidan scaffolds were measured from scanning electron microscopy and found to be 62–490 and 56–437 µm, respectively. In vitro studies using the MG-63 cell line revealed profound cytocompatibility, increased cell proliferation and enhanced alkaline phosphatase secretion in the Chi-Alg-fucoidan scaffold compared to the Chi-Alg scaffold. Further, protein adsorption and mineralization were about two times greater in the Chi-Alg-fucoidan scaffold than the Chi-Alg scaffold. Hence, we suggest that Chi-Alg-fucoidan will be a promising biomaterial for bone tissue regeneration.

  8. Fabrication of Bioceramic Bone Scaffolds for Tissue Engineering

    Science.gov (United States)

    Liu, Fwu-Hsing

    2014-10-01

    In this study, microhydroxyapatite and nanosilica sol were used as the raw materials for fabrication of bioceramic bone scaffold using selective laser sintering technology in a self-developed 3D Printing apparatus. When the fluidity of ceramic slurry is matched with suitable laser processing parameters, a controlled pore size of porous bone scaffold can be fabricated under a lower laser energy. Results shown that the fabricated scaffolds have a bending strength of 14.1 MPa, a compressive strength of 24 MPa, a surface roughness of 725 nm, a pore size of 750 μm, an apparent porosity of 32%, and a optical density of 1.8. Results indicate that the mechanical strength of the scaffold can be improved after heat treatment at 1200 °C for 2 h, while simultaneously increasing surface roughness conducive to osteoprogenitor cell adhesion. MTT method and SEM observations confirmed that bone scaffolds fabricated under the optimal manufacturing process possess suitable biocompatibility and mechanical properties, allowing smooth adhesion and proliferation of osteoblast-like cells. Therefore, they have great potential for development in the field of tissue engineering.

  9. Micro-distribution of uranium in bone after contamination: new insight into its mechanism of accumulation into bone tissue

    Energy Technology Data Exchange (ETDEWEB)

    Bourgeois, Damien [ICSM, LHYS, Bagnols-sur-Ceze (France); Burt-Pichat, Brigitte [INSERM, UMR 1033 Lyon (France); Lyon Univ. (France); Le Goff, Xavier [ICSM, L2ME, Bagnols-sur-Ceze (France)

    2015-09-15

    After internal contamination, uranium rapidly distributes in the body; up to 20 % of the initial dose is retained in the skeleton, where it remains for years. Several studies suggest that uranium has a deleterious effect on the bone cell system, but little is known regarding the mechanisms leading to accumulation of uranium in bone tissue. We have performed synchrotron radiation-based micro-X-ray fluorescence (SR μ-XRF) studies to assess the initial distribution of uranium within cortical and trabecular bones in contaminated rats' femurs at the micrometer scale. This sensitive technique with high spatial resolution is the only method available that can be successfully applied, given the small amount of uranium in bone tissue. Uranium was found preferentially located in calcifying zones in exposed rats and rapidly accumulates in the endosteal and periosteal area of femoral metaphyses, in calcifying cartilage and in recently formed bone tissue along trabecular bone. Furthermore, specific localized areas with high accumulation of uranium were observed in regions identified as micro-vessels and on bone trabeculae. These observations are of high importance in the study of the accumulation of uranium in bone tissue, as the generally proposed passive chemical sorption on the surface of the inorganic part (apatite) of bone tissue cannot account for these results. Our study opens original perspectives in the field of exogenous metal bio-mineralization.

  10. Osteocalcin/fibronectin-functionalized collagen matrices for bone tissue engineering.

    Science.gov (United States)

    Kim, S G; Lee, D S; Lee, S; Jang, J-H

    2015-06-01

    Collagen is the most abundant protein found in the extracellular matrix and is widely used to build scaffolds for biomedical applications which are the result of its biocompatibility and biodegradability. In the present study, we constructed a rhOCN/FNIII9-10 fusion protein and rhOCN/FNIII9-10-functionalized collagen matrices and investigated the potential value for bone tissue engineering. In vitro studies carried out with preosteoblastic MC3T3-E1 cells showed that rhOCN/FNIII9-10 fusion protein promoted cell adhesion and the mRNA levels of osteogenic markers including osteocalcin, runt-related transcription factor 2, alkaline phosphatase (ALP), and collagen type I. In addition, rhOCN/FNIII9-10-functionalized collagen matrices showed significant induction of the ALP activity more than rhFNIII9-10-functionalized collagen matrices or collagen matrices alone. These results suggested that rhOCN/FNIII9-10-functionalized collagen matrices have potential for bone tissue engineering.

  11. Hydroxyapatite-titanium bulk composites for bone tissue engineering applications.

    Science.gov (United States)

    Kumar, Alok; Biswas, Krishanu; Basu, Bikramjit

    2015-02-01

    The research work on bulk hydroxyapatite (HA)-based composites are driven by the need to develop biomaterials with better mechanical properties without compromising its bioactivity and biocompatibility properties. Despite several years of research, the mechanical properties of the HA-based composites still need to be enhanced to match the properties of natural cortical bone. In this regard, the scope of this review on the HA-based bulk biomaterials is limited to the processing and the mechanical as well as biocompatibility properties for bone tissue engineering applications of a model system that is hydroxyapatite-titanium (HA-Ti) bulk composites. It will be discussed in this review how HA-Ti based bulk composites can be processed to have better fracture toughness and strength without compromising biocompatibility. The advantages of the functionally gradient materials to integrate the mechanical and biocompatibility properties is a promising approach in hard tissue engineering and has been emphasized here in reference to the limited literature reports. On the biomaterials fabrication aspect, the recent results are discussed to demonstrate that advanced manufacturing techniques, like spark plasma sintering can be adopted as a processing route to restrict the sintering reactions, while enhancing the mechanical properties. Various toughening mechanisms related to careful tailoring of microstructure are discussed. The in vitro cytocompatibilty, cell fate processes as well as in vivo biocompatibility results are also reviewed and the use of flow cytometry to quantify in vitro cell fate processes is being emphasized. © 2014 Wiley Periodicals, Inc.

  12. Organotypic culture of human bone marrow adipose tissue.

    Science.gov (United States)

    Uchihashi, Kazuyoshi; Aoki, Shigehisa; Shigematsu, Masamori; Kamochi, Noriyuki; Sonoda, Emiko; Soejima, Hidenobu; Fukudome, Kenji; Sugihara, Hajime; Hotokebuchi, Takao; Toda, Shuji

    2010-04-01

    The precise role of bone marrow adipose tissue (BMAT) in the marrow remains unknown. The purpose of the present study was therefore to describe a novel method for studying BMAT using 3-D collagen gel culture of BMAT fragments, immunohistochemistry, ELISA and real-time reverse transcription-polymerase chain reaction. Mature adipocytes and CD45+ leukocytes were retained for >3 weeks. Bone marrow stromal cells (BMSC) including a small number of lipid-laden preadipocytes and CD44+/CD105+ mesenchymal stem cell (MSC)-like cells, developed from BMAT. Dexamethasone (10 micromol/L), but not insulin (20 mU/mL), significantly increased the number of preadipocytes. Dexamethasone and insulin also promoted leptin production and gene expression in BMAT. Adiponectin production by BMAT was BMAT, in which adiponectin protein secretion is normally very low, and that BMAT may exhibit a different phenotype from that of the visceral and subcutaneous adipose tissues. BMAT-osteoblast interactions were also examined, and it was found that osteoblasts inhibited the development of BMSC and reduced leptin production, while BMAT inhibited the growth and differentiation of osteoblasts. The present novel method proved to be useful for the study of BMAT biology.

  13. Changes in the population of perivascular cells in the bone tissue remodeling zones under microgravity

    Science.gov (United States)

    Katkova, Olena; Rodionova, Natalia; Shevel, Ivan

    2016-07-01

    Microgravity and long-term hypokinesia induce reduction both in bone mass and mineral saturation, which can lead to the development of osteoporosis and osteopenia. (Oganov, 2003). Reorganizations and adaptive remodeling processes in the skeleton bones occur in the topographical interconnection with blood capillaries and perivascular cells. Radioautographic studies with 3H- thymidine (Kimmel, Fee, 1980; Rodionova, 1989, 2006) have shown that in osteogenesis zones there is sequential differentiation process of the perivascular cells into osteogenic. Hence the study of populations of perivascular stromal cells in areas of destructive changes is actual. Perivascular cells from metaphysis of the rat femoral bones under conditions of modeling microgravity were studied using electron microscopy and cytochemistry (hindlimb unloading, 28 days duration) and biosatellite «Bion-M1» (duration of flight from April 19 till May 19, 2013 on C57, black mice). It was revealed that both control and test groups populations of the perivascular cells are not homogeneous in remodeling adaptive zones. These populations comprise of adjacent to endothelium poorly differentiated forms and isolated cells with signs of differentiation (specific increased volume of rough endoplasmic reticulum in cytoplasm). Majority of the perivascular cells in the control group (modeling microgravity) reveals reaction to alkaline phosphatase (marker of the osteogenic differentiation). In poorly differentiated cells this reaction is registered in nucleolus, nucleous and cytoplasm. In differentiating cells activity of the alkaline phosphatase is also detected on the outer surface of the cellular membrane. Unlike the control group in the bones of experimental animals reaction to the alkaline phosphatase is registered not in all cells of perivascular population. Part of the differentiating perivascular cells does not contain a product of the reaction. Under microgravity some poorly differentiated perivascular

  14. Peculiarities of the bone tissue resorption under microgravity conditions

    Science.gov (United States)

    Rodionova, N.; Oganov, V.; Polkovenko, O.; Nitsevich, T.

    The actual problem - peculiarities of resorptive processes in the spongiose of thingbones - we studied with the use of tranmissive electron microscopy in experiments on rats (American space station SLS-2) and on monkeys Macaca mulatt? (BION-11). Animals were onboard during 2 weeks. There was established, that the resorption happen with osteoclasts participation. They can create groups of cells. In the osteoclasts population we indicated not typical for the control (ground experiment) "giant" cells, which have on ultrathin sections 5-6 nuclei, many lysosomes, well developed "light" zone and "brush-border". The destruction of minera lized matrix in bone lacunas also happens by the way of osteolytic activity of osteocytes. Lysosome ferments of osteocytes are secreted by the eczocytosis. The osteocytic osteolysis, as well as the osteoclastic one can be seen as a physiological, gormon-dependent mechanism of resorption. The presence of a considerable number of neutrophiles, which enter in some zones of resorption is also typical. When these neutrophiles destruct, they release lysosomic ferments that dissolve the bone matrix. In some zones of resorption we noted the presence of the row from collagen fibrils, which loosed crystals , on mineralized matrix borders. The cell detritus is noted in zones of surface dissolving among crystallic conglomerates. It certificates the processes of osteogenic cells destruction that happen here. So, under the microgravity conditions in zones of adaptive remodeling of the spongiose the processes of the bone tissue resorption happen by some ways, namely: by the functional activization of osteoclasts; by the osteocytic osteolysis increasing; as a result of hydrolytic activity of neutrophiles, entering in these zones, and also by the local demineralization and further destruction of bone matrix surface zones.

  15. Comparative study of cryopreserved bone tissue and tissue preserved in a 98% glycerol solution.

    Science.gov (United States)

    Giovani, Arlete Mazzini Miranda; Croci, Alberto Tesconi; Oliveira, Cláudia Regina G C M; Filippi, Renée Zon; Santos, Luiz Augusto U; Maragni, Graziela G; Albhy, Thays Moreira

    2006-12-01

    To compare the bone graft cryopreservation method (at -80 degrees C) with a preservation method using a 98% glycerol solution at room temperature (10 degrees C-35 degrees C), by testing the antibacterial and fungal effects of 98% glycerol and comparatively analyzing the observed histological changes resulting from the use of both methods. This study was of 30 samples of trabecular bone tissue from 10 patients undergoing total hip arthroplasty. Each femoral head provided 3 samples that were randomized into 3 groups, namely, the control group, the cryopreserved group, and the group preserved in a 98% glycerol at room temperature for 1 year. The samples were submitted to histomorphologic, cell feasibility, and microbiologic analyses. The results were statistically analyzed using the McNemar test, with a statistical significance index of 0.05. Values obtained using the McNemar test to compare probability distributions of histomorphologic variables (mature or lamellar bone, immature bone, and necrosis) and cell feasibility (osteoblasts and osteoclasts) indicated that there is no difference between the distributions of variables under the 3 experimental conditions. Microbiological analysis of the 98% glycerol solution and bone fragments from samples stored for 1 year at room temperature did not show bacterial or fungal growth. The histological and microbiological investigation were performed at 2 different time points: immediately after the sample processing and after 1 year. The method used to preserve bone grafts kept in 98% glycerol at room temperature (10 degrees C-35 degrees C) was similar to cryopreservation in terms of bone matrix preservation; no bacteria or fungi were found in the samples.

  16. A Bioactive Hydrogel and 3D Printed Polycaprolactone System for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Ivan Hernandez

    2017-07-01

    Full Text Available In this study, a hybrid system consisting of 3D printed polycaprolactone (PCL filled with hydrogel was developed as an application for reconstruction of long bone defects, which are innately difficult to repair due to large missing segments of bone. A 3D printed gyroid scaffold of PCL allowed a larger amount of hydrogel to be loaded within the scaffolds as compared to 3D printed mesh and honeycomb scaffolds of similar volumes and strut thicknesses. The hydrogel was a mixture of alginate, gelatin, and nano-hydroxyapatite, infiltrated with human mesenchymal stem cells (hMSC to enhance the osteoconductivity and biocompatibility of the system. Adhesion and viability of hMSC in the PCL/hydrogel system confirmed its cytocompatibility. Biomineralization tests in simulated body fluid (SBF showed the nucleation and growth of apatite crystals, which confirmed the bioactivity of the PCL/hydrogel system. Moreover, dissolution studies, in SBF revealed a sustained dissolution of the hydrogel with time. Overall, the present study provides a new approach in bone tissue engineering to repair bone defects with a bioactive hybrid system consisting of a polymeric scaffold, hydrogel, and hMSC.

  17. Comparison of manual and automated cultures of bone marrow stromal cells for bone tissue engineering.

    Science.gov (United States)

    Akiyama, Hirokazu; Kobayashi, Asako; Ichimura, Masaki; Tone, Hiroshi; Nakatani, Masaru; Inoue, Minoru; Tojo, Arinobu; Kagami, Hideaki

    2015-11-01

    The development of an automated cell culture system would allow stable and economical cell processing for wider clinical applications in the field of regenerative medicine. However, it is crucial to determine whether the cells obtained by automated culture are comparable to those generated by manual culture. In the present study, we focused on the primary culture process of bone marrow stromal cells (BMSCs) for bone tissue engineering and investigated the feasibility of its automation using a commercially available automated cell culture system in a clinical setting. A comparison of the harvested BMSCs from manual and automated cultures using clinically acceptable protocols showed no differences in cell yields, viabilities, surface marker expression profiles, and in vivo osteogenic abilities. Cells cultured with this system also did not show malignant transformation and the automated process was revealed to be safe in terms of microbial contamination. Taken together, the automated procedure described in this report provides an approach to clinical bone tissue engineering. Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  18. Comparative study on seeding methods of human bone marrow stromal cells in bone tissue engineering

    Institute of Scientific and Technical Information of China (English)

    齐欣; 刘建国; 常颖; 徐莘香

    2004-01-01

    Background In general the traditional static seeding method has its limitation while the dynamic seeding method reveals its advantages over traditional static method. We compared static and dynamic seeding method for human bone marrow stromal cells (hBMSCs) in bone tissue engineering.Methods DNA assay was used for detecting the maximal initial seeding concentration for static seeding. Dynamic and static seeding methods were compared, when scaffolds were loaded with hBMSCs at this maximal initial cell seeding concentration. Histology and scanning electron microscope (SEM) were examined to evaluate the distribution of cells inside the constructs. Markers encoding osteogenic genes were measured by fluorescent RT-PCR. The protocol for dynamic seeding of hBMSCs was also investigated.Results DNA assay showed that the static maximal initial seeding concentration was lower than that in dynamic seeding. Histology and SEM showed even distribution and spread of cells in the dynamically seeded constructs, while their statically seeded counterparts showed cell aggregation.Fluorescent RT-PCR again showed stronger osteogenic potential of dynamically seeded constructs.Conclusion dynamic seeding of hBMSCs is a promising technique in bone tissue engineering.

  19. Effect of bone-soft tissue friction on ultrasound axial shear strain elastography

    Science.gov (United States)

    Tang, Songyuan; Chaudhry, Anuj; Kim, Namhee; Reddy, J. N.; Righetti, Raffaella

    2017-08-01

    Bone-soft tissue friction is an important factor affecting several musculoskeletal disorders, frictional syndromes and the ability of a bone fracture to heal. However, this parameter is difficult to determine using non-invasive imaging modalities, especially in clinical settings. Ultrasound axial shear strain elastography is a non-invasive imaging modality that has been used in the recent past to estimate the bonding between different tissue layers. As most elastography methods, axial shear strain elastography is primarily used in soft tissues. More recently, this technique has been proposed to assess the bone-soft tissue interface. In this paper, we investigate the effect of a variation in bone-soft tissue friction coefficient in the resulting axial shear strain elastograms. Finite element poroelastic models of bone specimens exhibiting different bone-soft tissue friction coefficients were created and mechanically analyzed. These models were then imported to an ultrasound elastography simulation module to assess the presence of axial shear strain patterns. In vitro experiments were performed to corroborate selected simulation results. The results of this study show that the normalized axial shear strain estimated at the bone-soft tissue interface is statistically correlated to the bone-soft tissue coefficient of friction. This information may prove useful to better interpret ultrasound elastography results obtained in bone-related applications and, possibly, monitor bone healing.

  20. Calcium Phosphate Scaffolds Combined with Bone Morphogenetic Proteins or Mesenchymal Stem Cells in Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Han Sun

    2015-01-01

    Full Text Available Objective: The purpose of this study was to review the current status of calcium phosphate (CaP scaffolds combined with bone morphogenetic proteins (BMPs or mesenchymal stem cells (MSCs in the field of bone tissue engineering (BTE. Date Sources: Data cited in this review were obtained primarily from PubMed and Medline in publications from 1979 to 2014, with highly regarded older publications also included. The terms BTE, CaP, BMPs, and MSC were used for the literature search. Study Selection: Reviews focused on relevant aspects and original articles reporting in vitro and/or in vivo results concerning the efficiency of CaP/BMPs or CaP/MSCs composites were retrieved, reviewed, analyzed, and summarized. Results: An ideal BTE product contains three elements: Scaffold, growth factors, and stem cells. CaP-based scaffolds are popular because of their outstanding biocompatibility, bioactivity, and osteoconductivity. However, they lack stiffness and osteoinductivity. To solve this problem, composite scaffolds of CaP with BMPs have been developed. New bone formation by CaP/BMP composites can reach levels similar to those of autografts. CaP scaffolds are compatible with MSCs and CaP/MSC composites exhibit excellent osteogenesis and stiffness. In addition, a CaP/MSC/BMP scaffold can repair bone defects more effectively than an autograft. Conclusions: Novel BTE products possess remarkable osteoconduction and osteoinduction capacities, and exhibit balanced degradation with osteogenesis. Further work should yield safe, viable, and efficient materials for the repair of bone lesions.

  1. Calcium Phosphate Scaffolds Combined with Bone Morphogenetic Proteins or Mesenchymal Stem Cells in Bone Tissue Engineering

    Institute of Scientific and Technical Information of China (English)

    Han Sun; Hui-Lin Yang

    2015-01-01

    Objective:The purpose of this study was to review the current status of calcium phosphate (CaP) scaffolds combined with bone morphogenetic proteins (BMPs) or mesenchymal stem cells (MSCs) in the field of bone tissue engineering (BTE).Date Sources:Data cited in this review were obtained primarily from PubMed and Medline in publications from 1979 to 2014,with highly regarded older publications also included.The terms BTE,CaP,BMPs,and MSC were used for the literature search.Study Selection:Reviews focused on relevant aspects and original articles reporting in vitro and/or in vivo results concerning the efficiency of CaP/BMPs or CaP/MSCs composites were retrieved,reviewed,analyzed,and summarized.Results:An ideal BTE product contains three elements:Scaffold,growth factors,and stem cells.CaP-based scaffolds are popular because of their outstanding biocompatibility,bioactivity,and osteoconductivity.However,they lack stiffness and osteoinductivity.To solve this problem,composite scaffolds of CaP with BMPs have been developed.New bone formation by CaP/BMP composites can reach levels similar to those of autografts.CaP scaffolds are compatible with MSCs and CaP/MSC composites exhibit excellent osteogenesis and stiffness.In addition,a CaP/MSC/BMP scaffold can repair bone defects more effectively than an autograft.Conclusions:Novel BTE products possess remarkable osteoconduction and osteoinduction capacities,and exhibit balanced degradation with osteogenesis.Further work should yield safe,viable,and efficient materials for the repair of bone lesions.

  2. Primary Hyperparathyroidism: The Influence of Bone Marrow Adipose Tissue on Bone Loss and of Osteocalcin on Insulin Resistance

    Directory of Open Access Journals (Sweden)

    Maira L. Mendonça

    Full Text Available OBJECTIVES: Bone marrow adipose tissue has been associated with low bone mineral density. However, no data exist regarding marrow adipose tissue in primary hyperparathyroidism, a disorder associated with bone loss in conditions of high bone turnover. The objective of the present study was to investigate the relationship between marrow adipose tissue, bone mass and parathyroid hormone. The influence of osteocalcin on the homeostasis model assessment of insulin resistance was also evaluated. METHODS: This was a cross-sectional study conducted at a university hospital, involving 18 patients with primary hyperparathyroidism (PHPT and 21 controls (CG. Bone mass was assessed by dual-energy x-ray absorptiometry and marrow adipose tissue was assessed by 1H magnetic resonance spectroscopy. The biochemical evaluation included the determination of parathyroid hormone, osteocalcin, glucose and insulin levels. RESULTS: A negative association was found between the bone mass at the 1/3 radius and parathyroid hormone levels (r = -0.69; p<0.01. Marrow adipose tissue was not significantly increased in patients (CG = 32.8±11.2% vs PHPT = 38.6±12%. The serum levels of osteocalcin were higher in patients (CG = 8.6±3.6 ng/mL vs PHPT = 36.5±38.4 ng/mL; p<0.005, but no associations were observed between osteocalcin and insulin or between insulin and both marrow adipose tissue and bone mass. CONCLUSION: These results suggest that the increment of adipogenesis in the bone marrow microenvironment under conditions of high bone turnover due to primary hyperparathyroidism is limited. Despite the increased serum levels of osteocalcin due to primary hyperparathyroidism, these patients tend to have impaired insulin sensitivity.

  3. Single walled carbon nanotube composites for bone tissue engineering.

    Science.gov (United States)

    Gupta, Ashim; Woods, Mia D; Illingworth, Kenneth David; Niemeier, Ryan; Schafer, Isaac; Cady, Craig; Filip, Peter; El-Amin, Saadiq F

    2013-09-01

    The purpose of this study was to develop single walled carbon nanotubes (SWCNT) and poly lactic-co-glycolic acid (PLAGA) composites for orthopedic applications and to evaluate the interaction of human stem cells (hBMSCs) and osteoblasts (MC3T3-E1 cells) via cell growth, proliferation, gene expression, extracellular matrix production and mineralization. PLAGA and SWCNT/PLAGA composites were fabricated with various amounts of SWCNT (5, 10, 20, 40, and 100 mg), characterized and degradation studies were performed. Cells were seeded and cell adhesion/morphology, growth/survival, proliferation and gene expression analysis were performed to evaluate biocompatibility. Imaging studies demonstrated uniform incorporation of SWCNT into the PLAGA matrix and addition of SWCNT did not affect the degradation rate. Imaging studies revealed that MC3T3-E1 and hBMSCs cells exhibited normal, non-stressed morphology on the composites and all were biocompatible. Composites with 10 mg SWCNT resulted in highest rate of cell proliferation (p composites. Gene expression of alkaline phosphatase, collagen I, osteocalcin, osteopontin, Runx-2, and Bone Sialoprotein was observed on all composites. In conclusion, SWCNT/PLAGA composites imparted beneficial cellular growth capabilities and gene expression, and mineralization abilities were well established. These results demonstrate the potential of SWCNT/PLAGA composites for musculoskeletal regeneration and bone tissue engineering (BTE) and are promising for orthopedic applications.

  4. Bone and soft tissue tumors of hip and pelvis

    Energy Technology Data Exchange (ETDEWEB)

    Bloem, Johan L., E-mail: j.l.bloem@lumc.nl [Leiden University Medical Center, Department of Radiology, PO Box 9600, 2300 RC Leiden (Netherlands); Reidsma, Inge I., E-mail: i.i.reidsma@lumc.nl [Leiden University Medical Center, Department of Radiology, PO Box 9600, 2300 RC Leiden (Netherlands)

    2012-12-15

    Objective is to identify epidemiologic and radiologic criteria allowing specific diagnoses of tumors and tumor-like lesions in the hip region and pelvis, and to optimize pre-operative staging. Patients with pelvic tumors are usually older, and their tumors are larger relative to patients with tumors in extremities. The majority of tumors in the pelvis are malignant (metastases, myeloma, chondrosarcoma, Ewing-, osteo-, and MFH/fibrosarcoma), while those in the proximal femur are in majority benign (fibrous dysplasia, solitary bone cyst, and osteoid osteoma). Soft tissue masses in the thigh in the elderly are typically sarcomas without tumor specific signs. Common tumor-like lesions occurring in the hip and pelvis that can mimic neoplasm are: infections (including tuberculosis), insufficiency/avulsion fractures, cysts, fibrous dysplasia, aneurysmal bone cyst, Langerhans cell histiocytosis, and Paget's disease. Local MR staging is based on the compartmental anatomy. The psoas and gluteal muscles are easily invaded by sarcoma originating in the ileum. The pectineus muscle protects the neurovascular bundle at the level of the hip. The thigh is separated into three compartments, some structures (Sartorius muscle) cross borders between compartments. Immobile joints (SI-joints, osteoarthritic hip) are relatively easily crossed by sarcoma and giant cell tumor.

  5. Cobalt doped proangiogenic hydroxyapatite for bone tissue engineering application.

    Science.gov (United States)

    Kulanthaivel, Senthilguru; Roy, Bibhas; Agarwal, Tarun; Giri, Supratim; Pramanik, Krishna; Pal, Kunal; Ray, Sirsendu S; Maiti, Tapas K; Banerjee, Indranil

    2016-01-01

    The present study delineates the synthesis and characterization of cobalt doped proangiogenic-osteogenic hydroxyapatite. Hydroxyapatite samples, doped with varying concentrations of bivalent cobalt (Co(2+)) were prepared by the ammoniacal precipitation method and the extent of doping was measured by ICP-OES. The crystalline structure of the doped hydroxyapatite samples was confirmed by XRD and FTIR studies. Analysis pertaining to the effect of doped hydroxyapatite on cell cycle progression and proliferation of MG-63 cells revealed that the doping of cobalt supported the cell viability and proliferation up to a threshold limit. Furthermore, such level of doping also induced differentiation of the bone cells, which was evident from the higher expression of differentiation markers (Runx2 and Osterix) and better nodule formation (SEM study). Western blot analysis in conjugation with ELISA study confirmed that the doped HAp samples significantly increased the expression of HIF-1α and VEGF in MG-63 cells. The analysis described here confirms the proangiogenic-osteogenic properties of the cobalt doped hydroxyapatite and indicates its potential application in bone tissue engineering. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. [Stereological analysis of rat bone tissue after a flight on the Kosmos-1129 biosatellite].

    Science.gov (United States)

    Prokhonchukov, A A; Peschanskiĭ, V S

    1982-01-01

    Stereological measurements of volume fractions of 53 samples of compact and spongy structures of bones of 15 rats were carried out. The measurements were performed on cortical lamellae, trabecules and lacunae, channels of osteons and matrices of femoral, tibial and fibular bones of rats. Postflight no significant changes were seen in the above parameters as compared to the vivarium controls. During readaptation to I g a slight increase in the volume fraction of spongy bones was noted.

  7. Rapid prototyping for tissue-engineered bone scaffold by 3D printing and biocompatibility study.

    Science.gov (United States)

    He, Hui-Yu; Zhang, Jia-Yu; Mi, Xue; Hu, Yang; Gu, Xiao-Yu

    2015-01-01

    The prototyping of tissue-engineered bone scaffold (calcined goat spongy bone-biphasic ceramic composite/PVA gel) by 3D printing was performed, and the biocompatibility of the fabricated bone scaffold was studied. Pre-designed STL file was imported into the GXYZ303010-XYLE 3D printing system, and the tissue-engineered bone scaffold was fabricated by 3D printing using gel extrusion. Rabbit bone marrow stromal cells (BMSCs) were cultured in vitro and then inoculated to the sterilized bone scaffold obtained by 3D printing. The growth of rabbit BMSCs on the bone scaffold was observed under the scanning electron microscope (SEM). The effect of the tissue-engineered bone scaffold on the proliferation and differentiation of rabbit BMSCs using MTT assay. Universal testing machine was adopted to test the tensile strength of the bone scaffold. The leachate of the bone scaffold was prepared and injected into the New Zealand rabbits. Cytotoxicity test, acute toxicity test, pyrogenic test and intracutaneous stimulation test were performed to assess the biocompatibility of the bone scaffold. Bone scaffold manufactured by 3D printing had uniform pore size with the porosity of about 68.3%. The pores were well interconnected, and the bone scaffold showed excellent mechanical property. Rabbit BMSCs grew and proliferated on the surface of the bone scaffold after adherence. MTT assay indicated that the proliferation and differentiation of rabbit BMSCs on the bone scaffold did not differ significantly from that of the cells in the control. In vivo experiments proved that the bone scaffold fabricated by 3D printing had no acute toxicity, pyrogenic reaction or stimulation. Bone scaffold manufactured by 3D printing allows the rabbit BMSCs to adhere, grow and proliferate and exhibits excellent biomechanical property and high biocompatibility. 3D printing has a good application prospect in the prototyping of tissue-engineered bone scaffold.

  8. Bone transplantation and tissue engineering. Part II: bone graft and osteogenesis in the seventeenth, eighteenth and nineteenth centuries (Duhamel, Haller, Ollier and MacEwen).

    Science.gov (United States)

    Hernigou, Philippe

    2015-01-01

    In the 18th century, the fate of allografts and their role in bone formation became of interest to many orthopaedic surgeons. A controversy over the science of osteogenesis, the formation of bone, had emerged following the opposing views of Duhamel and von Haller. Duhamel noted that the periosteum had a deep osteogenic layer, which he termed the "cambium layer". However, von Haller claimed the opposite: the periosteum was not osteogenic. In the 19th century, Ollier performed comprehensive studies on the periosteum. Ollier's experiments were published in two volumes entitled "Traite Experimental et clinique de la regeneration des os" in 1867. His conclusion was that transplanted periosteum and bone survived and could become osteogenic under proper conditions. The controversy was furthered by MacEwen who believed, contrary to Duhamel and Ollier, that the periosteum had no osteogenetic power and was purely a limiting membrane giving direction to bone growth but taking no active part in it. This manuscript describes this period of controversies about the osteogenesis of the transplanted bone, marrow and periosteum that would eventually die or not and be replaced by surrounding tissue or be active for osteogenesis. Whether bone grafts are a form of passive scaffolding or active in osteogenesis was the main question about auto and allografts in the 18th and 19th centuries. In response to this challenge, many papers were written to defend each side of the argument.

  9. An update on the Application of Nanotechnology in Bone Tissue Engineering

    Science.gov (United States)

    Griffin, MF; Kalaskar, DM; Seifalian, A.; Butler, PE

    2016-01-01

    Background: Natural bone is a complex and hierarchical structure. Bone possesses an extracellular matrix that has a precise nano-sized environment to encourage osteoblasts to lay down bone by directing them through physical and chemical cues. For bone tissue regeneration, it is crucial for the scaffolds to mimic the native bone structure. Nanomaterials, with features on the nanoscale have shown the ability to provide the appropriate matrix environment to guide cell adhesion, migration and differentiation. Methods: This review summarises the new developments in bone tissue engineering using nanobiomaterials. The design and selection of fabrication methods and biomaterial types for bone tissue engineering will be reviewed. The interactions of cells with different nanostructured scaffolds will be discussed including nanocomposites, nanofibres and nanoparticles. Results: Several composite nanomaterials have been able to mimic the architecture of natural bone. Bioceramics biomaterials have shown to be very useful biomaterials for bone tissue engineering as they have osteoconductive and osteoinductive properties. Nanofibrous scaffolds have the ability to provide the appropriate matrix environment as they can mimic the extracellular matrix structure of bone. Nanoparticles have been used to deliver bioactive molecules and label and track stem cells. Conclusion: Future studies to improve the application of nanomaterials for bone tissue engineering are needed. PMID:28217209

  10. Clinical application of human mesenchymal stromal cells for bone tissue engineering

    NARCIS (Netherlands)

    Ganguly, Anindita; Meijer, Gert; van Blitterswijk, Clemens; de Boer, Jan

    2010-01-01

    The gold standard in the repair of bony defects is autologous bone grafting, even though it has drawbacks in terms of availability and morbidity at the harvesting site. Bone-tissue engineering, in which osteogenic cells and scaffolds are combined, is considered as a potential bone graft substitute

  11. Routine bone scintigraphy in primary staging of soft tissue sarcoma - Is it worthwhile?

    NARCIS (Netherlands)

    Jager, PL; Hoekstra, HJ; Leeuw, JA; van der Graaf, WTA; de Vries, EGE; Piers, DA

    2000-01-01

    BACKGROUND. The incidence of bone metastases in soft tissue sarcoma (STS) patients seems to be low but has not been studied separately. In this study, the authors aimed to determine the value of routine radionuclide bone scanning in preoperative staging of STS patients. METHODS. Preoperative bone

  12. Routine bone scintigraphy in primary staging of soft tissue sarcoma - Is it worthwhile?

    NARCIS (Netherlands)

    Jager, PL; Hoekstra, HJ; Leeuw, JA; van der Graaf, WTA; de Vries, EGE; Piers, DA

    2000-01-01

    BACKGROUND. The incidence of bone metastases in soft tissue sarcoma (STS) patients seems to be low but has not been studied separately. In this study, the authors aimed to determine the value of routine radionuclide bone scanning in preoperative staging of STS patients. METHODS. Preoperative bone sc

  13. Evaluation of minimal disseminated disease in cryopreserved ovarian tissue from bone and soft tissue sarcoma patients.

    Science.gov (United States)

    Dolmans, M M; Iwahara, Y; Donnez, J; Soares, M; Vaerman, J L; Amorim, C A; Poirel, H

    2016-10-01

    What is the risk of finding malignant cells in cryopreserved ovarian tissue from sarcoma patients? Minimal disseminated disease (MDD) was not detected in frozen-thawed ovarian tissue from 26 patients by any of the sensitive methods applied. In case of leukemia, the risk of malignant cell transmission through the graft is well known and widely documented. However, for bone cancer, like Ewing sarcoma or osteosarcoma, only a small number of case reports, have been published. These cancers often affect prepubertal girls, in whom ovarian tissue cryopreservation and transplantation is the only option to preserve fertility. The presence of malignant cells in cryopreserved ovarian tissue from patients with bone/soft tissue sarcoma was investigated with disease-specific markers for each patient, using immunohistochemistry (IHC), FISH and real-time quantitative RT-PCR (qPCR), with the original tumor serving as a positive control. Forty-eight sarcoma patients were enrolled in the study, 12 of whom subsequently died. In each case, tissue from the primary tumor was investigated in order to identify markers (immunohistochemical and/or molecular) to analyze the ovarian tissue case by case. Ovarian tissue from osteosarcoma (n = 15), liposarcoma (n = 1) and undifferentiated sarcoma (n = 5) patients could not be evaluated, as no specific markers were detected by FISH or sensitive IHC in any of their primary tumoral tissue. One patient with Li-Fraumeni syndrome was also excluded from the study. IHC analyses were therefore performed on ovarian tissue from 26 patients and qPCR on 19. The primary tumors involved were Ewing sarcoma family of tumors (n = 14), rhabdomyosarcoma (n = 7), synovial sarcoma (n = 2), clear cell sarcoma (n = 2) and a malignant peripheral nerve sheath tumor (n = 1). MDD was not detected in any of the 26 analyzed samples using sensitive techniques in this largest reported series, even from patients who subsequently died and/or those who presented

  14. Graphene and its nanostructure derivatives for use in bone tissue engineering: Recent advances.

    Science.gov (United States)

    Shadjou, Nasrin; Hasanzadeh, Mohammad

    2016-05-01

    Tissue engineering and regenerative medicine represent areas of increasing interest because of the major progress in cell and organ transplantation, as well as advances in materials science and engineering. Tissue-engineered bone constructs have the potential to alleviate the demand arising from the shortage of suitable autograft and allograft materials for augmenting bone healing. Graphene and its derivatives have attracted much interest for applications in bone tissue engineering. For this purpose, this review focuses on more recent advances in tissue engineering based on graphene-biomaterials from 2013 to May 2015. The purpose of this article was to give a general description of studies of nanostructured graphene derivatives for bone tissue engineering. In this review, we highlight how graphene family nanomaterials are being exploited for bone tissue engineering. Firstly, the main requirements for bone tissue engineering were discussed. Then, the mechanism by which graphene based materials promote new bone formation was explained, following which the current research status of main types of nanostructured scaffolds for bone tissue engineering was reviewed and discussed. In addition, graphene-based bioactive glass, as a potential drug/growth factor carrier, was reviewed which includes the composition-structure-drug delivery relationship and the functional effect on the tissue-stimulation properties. Also, the effect of structural and textural properties of graphene based materials on development of new biomaterials for production of bone implants and bone cements were discussed. Finally, the present review intends to provide the reader an overview of the current state of the graphene based biomaterials in bone tissue engineering, its limitations and hopes as well as the future research trends for this exciting field of science.

  15. Relationship of bone erosion with the urate and soft tissue components of the tophus in gout: a dual energy computed tomography study.

    Science.gov (United States)

    Sapsford, Mark; Gamble, Gregory D; Aati, Opetaia; Knight, Julie; Horne, Anne; Doyle, Anthony J; Dalbeth, Nicola

    2017-01-01

    Imaging and pathology studies have established a close relationship between tophus and bone erosion in gout. The tophus is an organized structure consisting of urate crystals and chronic inflammatory tissue. The aim of this work was to examine the relationship between bone erosion and each component of the tophus. Plain radiographs and dual energy CT scans of the feet were prospectively obtained from 92 people with tophaceous gout. The 10 MTP joints were scored for erosion score, tophus urate and soft tissue volume. Data were analysed using generalized estimating equations and mediation analysis. Tophus was visualized in 80.2% of all joints with radiographic (XR) erosion [odds ratio (OR) = 7.1 (95% CI: 4.8, 10.6)] and urate was visualized in 78.6% of all joints with XR erosion [OR = 6.6 (95% CI: 4.7, 9.3)]. In mediation analysis, tophus urate volume and soft tissue volume were directly associated with XR erosion score. About a third of the association of the tophus urate volume with XR erosion score was indirectly mediated through the strong association between tophus urate volume and tophus soft tissue volume. Urate and soft tissue components of the tophus are strongly and independently associated with bone erosion in gout. © The Author 2016. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  16. Axial vascularization of a large volume calcium phosphate ceramic bone substitute in the sheep AV loop model.

    Science.gov (United States)

    Beier, Justus P; Horch, Raymund E; Hess, Andreas; Arkudas, Andreas; Heinrich, Johanna; Loew, Johanna; Gulle, Heinz; Polykandriotis, Elias; Bleiziffer, Oliver; Kneser, Ulrich

    2010-03-01

    Vascularization still remains an obstacle to engineering of bone tissue with clinically relevant dimensions. Our aim was to induce axial vascularization in a large volume of a clinically approved biphasic calcium phosphate ceramic by transferring the arteriovenous (AV) loop approach to a large animal model. HA/beta-TCP granula were mixed with fibrin gel for a total volume of 16 cm(3), followed by incorporation into an isolation chamber together with an AV loop. The chambers were implanted into the groins of merino sheep and the development of vascularization was monitored by sequential non-invasive magnetic resonance imaging (MRI). The chambers were explanted after 6 and 12 weeks, the pedicle was perfused with contrast agent and specimens were subjected to micro-computed tomography (micro-CT) scan and histological analysis. Sequential MRI demonstrated a significantly increased perfusion in the HA/beta-TCP matrices over time. Micro-CT scans and histology confirmed successful axial vascularization of HA/beta-TCP constructs. This study demonstrates, for the first time, successful axial vascularization of a clinically approved bone substitute with a significant volume in a large animal model by means of a microsurgically created AV loop, thus paving the way for the first microsurgical transplantation of a tissue-engineered, axially vascularized bone with clinically relevant dimensions.

  17. The correlation between mineralization degree and bone tissue stiffness in the porcine mandibular condyle

    NARCIS (Netherlands)

    Willems, N.M.B.K.; Mulder, L.; den Toonder, J.M.J.; Zentner, A.; Langenbach, G.E.J.

    2014-01-01

    The aim of this study was to correlate the local tissue mineral density (TMD) with the bone tissue stiffness. It was hypothesized that these variables are positively correlated. Cancellous and cortical bone samples were derived from ten mandibular condyles taken from 5 young and 5 adult female pigs.

  18. Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering.

    Science.gov (United States)

    Carlier, Aurélie; Skvortsov, Gözde Akdeniz; Hafezi, Forough; Ferraris, Eleonora; Patterson, Jennifer; Koç, Bahattin; Van Oosterwyck, Hans

    2016-05-17

    Three-dimensional (3D) bioprinting is a rapidly advancing tissue engineering technology that holds great promise for the regeneration of several tissues, including bone. However, to generate a successful 3D bone tissue engineering construct, additional complexities should be taken into account such as nutrient and oxygen delivery, which is often insufficient after implantation in large bone defects. We propose that a well-designed tissue engineering construct, that is, an implant with a specific spatial pattern of cells in a matrix, will improve the healing outcome. By using a computational model of bone regeneration we show that particular cell patterns in tissue engineering constructs are able to enhance bone regeneration compared to uniform ones. We successfully bioprinted one of the most promising cell-gradient patterns by using cell-laden hydrogels with varying cell densities and observed a high cell viability for three days following the bioprinting process. In summary, we present a novel strategy for the biofabrication of bone tissue engineering constructs by designing cell-gradient patterns based on a computational model of bone regeneration, and successfully bioprinting the chosen design. This integrated approach may increase the success rate of implanted tissue engineering constructs for critical size bone defects and also can find a wider application in the biofabrication of other types of tissue engineering constructs.

  19. Decreased Bone Volume and Bone Mineral Density in the Tibial Trabecular Bone Is Associated with Per2 Gene by 405 nm Laser Stimulation

    Directory of Open Access Journals (Sweden)

    Yeong-Min Yoo

    2015-11-01

    Full Text Available Low-level laser therapy/treatment (LLLT using a minimally invasive laser needle system (MILNS might enhance bone formation and suppress bone resorption. In this study, the use of 405 nm LLLT led to decreases in bone volume and bone mineral density (BMD of tibial trabecular bone in wild-type (WT and Per2 knockout (KO mice. Bone volume and bone mineral density of tibial trabecular bone was decreased by 405 nm LLLT in Per2 KO compared to WT mice at two and four weeks. To determine the reduction in tibial bone, mRNA expressions of alkaline phosphatase (ALP and Per2 were investigated at four weeks after 405 nm laser stimulation using MILNS. ALP gene expression was significantly reduced in the LLLT-stimulated right tibial bone of WT and Per2 KO mice compared to the non-irradiated left tibia (p < 0.001. Per2 mRNA expression in WT mice was significantly reduced in the LLLT-stimulated right tibial bone compared to the non-irradiated left tibia (p < 0.001. To identify the decrease in tibial bone mediated by the Per2 gene, levels of runt-related transcription factor 2 (Runx2 and ALP mRNAs were determined in non-irradiated WT and Per2 KO mice. These results demonstrated significant downregulation of Runx2 and ALP mRNA levels in Per2 KO mice (p < 0.001. Therefore, the reduction in tibial trabecular bone resulting from 405 nm LLLT using MILNS might be associated with Per2 gene expression.

  20. Electrospun Hydroxyapatite-Containing Chitosan Nanofibers Crosslinked with Genipin for Bone Tissue Engineering

    OpenAIRE

    Frohbergh, Michael E.; Katsman, Anna; Botta, Gregory P.; Lazarovici, Phillip; Schauer, Caroline L.; Wegst, Ulrike G.K.; Lelkes, Peter I

    2012-01-01

    Reconstruction of large bone defects remains problematic in orthopedic and craniofacial clinical practice. Autografts are limited in supply and are associated with donor site morbidity while other materials show poor integration with the host’s own bone. This lack of integration is often due to the absence of periosteum, the outer layer of bone that contains osteoprogenitor cells and is critical for the growth and remodeling of bone tissue. In this study we developed a one-step platform to el...

  1. Biomineralization of a Self-Assembled Extracellular Matrix for Bone Tissue Engineering

    OpenAIRE

    Meng, Yizhi; Qin, Yi-Xian; DiMasi, Elaine; Ba, Xiaolan; Rafailovich, Miriam; Pernodet, Nadine

    2008-01-01

    Understanding how biomineralization occurs in the extracellular matrix (ECM) of bone cells is crucial to the understanding of bone formation and the development of a successfully engineered bone tissue scaffold. It is still unclear how ECM mechanical properties affect protein-mineral interactions in early stages of bone mineralization. We investigated the longitudinal mineralization properties of MC3T3-E1 cells and the elastic modulus of their ECM using shear modulation force microscopy, sync...

  2. Biomimetic coatings for bone tissue engineering of critical-sized defects

    OpenAIRE

    2010-01-01

    The repair of critical-sized bone defects is still challenging in the fields of implantology, maxillofacial surgery and orthopaedics. Current therapies such as autografts and allografts are associated with various limitations. Cytokine-based bone tissue engineering has been attracting increasing attention. Bone-inducing agents have been locally injected to stimulate the native bone-formation activity, but without much success. The reason is that these drugs must be delivered slowly and at a l...

  3. Sex Assessment from the Volume of the First Metatarsal Bone: A Comparison of Linear and Volume Measurements.

    Science.gov (United States)

    Gibelli, Daniele; Poppa, Pasquale; Cummaudo, Marco; Mattia, Mirko; Cappella, Annalisa; Mazzarelli, Debora; Zago, Matteo; Sforza, Chiarella; Cattaneo, Cristina

    2017-02-23

    Sexual dimorphism is a crucial characteristic of skeleton. In the last years, volumetric and surface 3D acquisition systems have enabled anthropologists to assess surfaces and volumes, whose potential still needs to be verified. This article aimed at assessing volume and linear parameters of the first metatarsal bone through 3D acquisition by laser scanning. Sixty-eight skeletons underwent 3D scan through laser scanner: Seven linear measurements and volume from each bone were assessed. A cutoff value of 13,370 mm(3) was found, with an accuracy of 80.8%. Linear measurements outperformed volume: metatarsal length and mediolateral width of base showed higher cross-validated accuracies (respectively, 82.1% and 79.1%, raising at 83.6% when both of them were included). Further studies are needed to verify the real advantage for sex assessment provided by volume measurements. © 2017 American Academy of Forensic Sciences.

  4. Evaluation of volume and solitary bone cyst remodeling using conventional radiological examination

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, Maciej; Melzer, Piotr [Karol Marcinkowski University of Medical Sciences, Department of Paediatric Orthopaedics, Poznan (Poland); Ignys-O' Byrne, Anna [J. Strus City Hospital, Department of Radiology, Poznan (Poland); Ignys, Iwona [Karol Marcinkowski University of Medical Sciences, Department of Paediatric Gastroenterology and Metabolic Diseases, Poznan (Poland); Mankowski, Przemyslaw [Karol Marcinkowski University of Medical Sciences, Department of Paediatric Surgery, Traumatology and Urology, Poznan (Poland)

    2010-03-15

    To evaluate cyst remodeling, including complete healing and recurrence, and its relation to the cyst volume in two groups of patients, using curettage and bone grafting or methylprednisolone injection. A retrospective analysis was carried out on data from 132 patients with solitary bone cyst, where 79 (59.9%) had undergone curettage and bone grafting and 53 (40.1%) had been administered methylprednisolone injection, with a mean time to follow up of 12 years. The cyst volume was evaluated from conventional radiographs and the method originally reported by Goebel et al. to evaluate the volume of Ewing's sarcoma. The results were analyzed using the criteria of Neer et al. and Capanna et al. The mean cyst volume was 36.8 cm{sup 3}. Recurrence was noted in 16 (20.2%) patients treated with curettage and in nine (17.0%) treated with methylprednisolone. Cyst volume in patients treated with curettage and bone grafting ranged from 8.3 cm{sup 3} to 100.0 cm{sup 3} and with methylprednisolone from 14.0 cm{sup 3} to 50.6 cm{sup 3}. In neither group was the cyst volume related to recurrence. Volumes from 1.3 cm{sup 3} to 81.9 cm{sup 3} were stated for patients treated with curettage and bone grafting, when complete healing was observed; they were significantly lower than for those of the total group of patients who underwent curettage and bone grafting. 1. An association between solitary cyst volume and recurrence in patients treated with either bone curettage and grafting or methylprednisolone was not found. 2. The frequency of complete healing in patients treated with bone curettage and grafting decreased with an increase in the cyst volume. (orig.)

  5. [Current status of bone/cartilage tissue engineering towards clinical applications].

    Science.gov (United States)

    Ohgushi, Hajime

    2014-10-01

    Osteo/chondrogenic differentiation capabilities are seen after in vivo implantation of mesenchymal stem cells (MSCs), which are currently used for the patients having bone/cartilage defects. Importantly, the differentiation capabilities are induced by culturing technology, resulting in in vitro bone/cartilage formation. Especially, the in vitro bone tissue is useful for bone tissue regeneration. For cartilage regeneration, culture expanded chondrocytes derived from patient's normal cartilage are also used for the patients having cartilage damages. Recently, the cultured chondrocytes embedded in atelocollagen gel are obtainable as tissue engineered products distributed by Japan Tissue Engineering Co. Ltd. The products are available in the well-regulated hospitals by qualified orthopedic surgeons. The criteria for these hospitals/surgeons have been established. This review paper focuses on current status of bone/cartilage tissue engineering towards clinical applications in Japan.

  6. Cobalt doped proangiogenic hydroxyapatite for bone tissue engineering application

    Energy Technology Data Exchange (ETDEWEB)

    Kulanthaivel, Senthilguru [Department of Biotechnology and Medical Engineering, National Institute of Technology, Rourkela, Odisha 769008 (India); Roy, Bibhas [Department of Biotechnology, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721302 (India); Agarwal, Tarun [Department of Biotechnology and Medical Engineering, National Institute of Technology, Rourkela, Odisha 769008 (India); Giri, Supratim [Department of Chemistry, National Institute of Technology, Rourkela, Odisha 769008 (India); Pramanik, Krishna; Pal, Kunal; Ray, Sirsendu S. [Department of Biotechnology and Medical Engineering, National Institute of Technology, Rourkela, Odisha 769008 (India); Maiti, Tapas K. [Department of Biotechnology, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721302 (India); Banerjee, Indranil, E-mail: indraniliit@gmail.com [Department of Biotechnology and Medical Engineering, National Institute of Technology, Rourkela, Odisha 769008 (India)

    2016-01-01

    ABSTRACT: The present study delineates the synthesis and characterization of cobalt doped proangiogenic–osteogenic hydroxyapatite. Hydroxyapatite samples, doped with varying concentrations of bivalent cobalt (Co{sup 2+}) were prepared by the ammoniacal precipitation method and the extent of doping was measured by ICP–OES. The crystalline structure of the doped hydroxyapatite samples was confirmed by XRD and FTIR studies. Analysis pertaining to the effect of doped hydroxyapatite on cell cycle progression and proliferation of MG-63 cells revealed that the doping of cobalt supported the cell viability and proliferation up to a threshold limit. Furthermore, such level of doping also induced differentiation of the bone cells, which was evident from the higher expression of differentiation markers (Runx2 and Osterix) and better nodule formation (SEM study). Western blot analysis in conjugation with ELISA study confirmed that the doped HAp samples significantly increased the expression of HIF-1α and VEGF in MG-63 cells. The analysis described here confirms the proangiogenic–osteogenic properties of the cobalt doped hydroxyapatite and indicates its potential application in bone tissue engineering. - Highlights: • Cobalt (Co{sup +2}) doped hydroxyapatite (Co-HAp) can be prepared by the wet chemical method. • The concentration of Co{sup +2} influences the physico-chemical properties of HAp. • Co-HAp was found to be biocompatible and osteogenic. • Co-HAp enhanced cellular VEGF secretion through HIF-1α stabilization. • The optimum biological performance of Co-HAp was achieved for 0.33% (w/w) Co{sup +2} doping.

  7. Effectiveness of tissue engineered chitosan-gelatin composite scaffold loaded with human platelet gel in regeneration of critical sized radial bone defect in rat.

    Science.gov (United States)

    Oryan, Ahmad; Alidadi, Soodeh; Bigham-Sadegh, Amin; Moshiri, Ali; Kamali, Amir

    2017-03-29

    Although many strategies have been utilized to accelerate bone regeneration, an appropriate treatment strategy to regenerate a new bone with optimum morphology and mechanical properties has not been invented as yet. This study investigated the healing potential of a composite scaffold consisting of chitosan (CS), gelatin (Gel) and platelet gel (PG), named CS-Gel-PG, on a bilateral critical sized radial bone defect in rat. Eighty radial bone defects were bilaterally created in 40 Sprague-Dawley rats and were randomly divided into eight groups including untreated, autograft, CS, Gel, CS-PG, Gel-PG, CS-Gel, and CS-Gel-PG treated defects. The bone defects were evaluated clinically and radiologically during the study and their bone samples were assessed by gross and histopathology, histomorphometry, CT-scan, scanning electron microscopy, and biomechanical testing after 8weeks of bone injury. The autograft and CS-Gel-PG groups showed significantly higher new bone formation, density of osseous and cartilaginous tissues, bone volume, and mechanical performance than the defect, CS and Gel-PG groups (P˂0.05). In addition, bone volume, density of osseous and cartilaginous tissues, and numbers of osteons in the CS-Gel-PG group were significantly superior to the CS-PG, CS-Gel and Gel groups (P˂0.05). Increased mRNA levels of alkaline phosphatase, runt-related transcription factor 2, osteocalcin, collagen type 1 and CD31, vascular endothelial growth factor as osteogenic and angiogenic differentiation markers were found with the CS-Gel-PG scaffold by quantitative real-time PCR in vitro after 30days of culturing on bone marrow-derived mesenchymal stem cells. In conclusion, the healing potential of CS-Gel scaffold embedded with PG was comparable to autografting and therefore, it can be offered as an appropriate scaffold in bone tissue engineering and regenerative applications.

  8. A nano-hydroxyapatite--pullulan/dextran polysaccharide composite macroporous material for bone tissue engineering.

    Science.gov (United States)

    Fricain, Jean Christophe; Schlaubitz, Silke; Le Visage, Catherine; Arnault, Isabelle; Derkaoui, Sidi Mohammed; Siadous, Robin; Catros, Sylvain; Lalande, Charlotte; Bareille, Reine; Renard, Martine; Fabre, Thierry; Cornet, Sandro; Durand, Marlène; Léonard, Alain; Sahraoui, Nouredine; Letourneur, Didier; Amédée, Joëlle

    2013-04-01

    Research in bone tissue engineering is focused on the development of alternatives to allogenic and autologous bone grafts that can stimulate bone healing. Here, we present scaffolds composed of the natural hydrophilic polysaccharides pullulan and dextran, supplemented or not with nanocrystalline hydroxyapatite particles (nHA). In vitro studies revealed that these matrices induced the formation of multicellular aggregates and expression of early and late bone specific markers with human bone marrow stromal cells in medium deprived of osteoinductive factors. In absence of any seeded cells, heterotopic implantation in mice and goat, revealed that only the composite macroporous scaffold (Matrix + nHA) (i) retained subcutaneously local growth factors, including Bone Morphogenetic Protein 2 (BMP2) and VEGF165, (ii) induced the deposition of a biological apatite layer, (iii) favored the formation of a dense mineralized tissue subcutaneously in mice, as well osteoid tissue after intramuscular implantation in goat. The composite scaffold was thereafter implanted in orthotopic preclinical models of critical size defects, in small and large animals, in three different bony sites, i.e. the femoral condyle of rat, a transversal mandibular defect and a tibial osteotomy in goat. The Matrix + nHA induced a highly mineralized tissue in the three models whatever the site of implantation, as well as osteoid tissue and bone tissue regeneration in direct contact to the matrix. We therefore propose this composite matrix as a material for stimulating bone cell differentiation of host mesenchymal stem cells and bone formation for orthopedic and maxillofacial surgical applications.

  9. Application of the digital volume correlation technique for the measurement of displacement and strain fields in bone: a literature review.

    Science.gov (United States)

    Roberts, Bryant C; Perilli, Egon; Reynolds, Karen J

    2014-03-21

    Digital volume correlation (DVC) provides experimental measurements of displacements and strains throughout the interior of porous materials such as trabecular bone. It can provide full-field continuum- and tissue-level measurements, desirable for validation of finite element models, by comparing image volumes from subsequent µCT scans of a sample in unloaded and loaded states. Since the first application of DVC for measurement of strain in bone tissue, subsequent reports of its application to trabecular bone cores up to whole bones have appeared within the literature. An "optimal" set of procedures capable of precise and accurate measurements of strain, however, still remains unclear, and a systematic review focussing explicitly on the increasing number of DVC algorithms applied to bone or structurally similar materials is currently unavailable. This review investigates the effects of individual parameters reported within individual studies, allowing to make recommendations for suggesting algorithms capable of achieving high accuracy and precision in displacement and strain measurements. These recommendations suggest use of subsets that are sufficiently large to encompass unique datasets (e.g. subsets of 500 µm edge length when applied to human trabecular bone cores, such as cores 10mm in height and 5mm in diameter, scanned at 15 µm voxel size), a shape function that uses full affine transformations (translation, rotation, normal strain and shear strain), the robust normalized cross-correlation coefficient objective function, and high-order interpolation schemes. As these employ computationally burdensome algorithms, researchers need to determine whether they have the necessary computational resources or time to adopt such strategies. As each algorithm is suitable for parallel programming however, the adoption of high precision techniques may become more prevalent in the future.

  10. Quantitation of mandibular symphysis volume as a source of bone grafting.

    Science.gov (United States)

    Verdugo, Fernando; Simonian, Krikor; Smith McDonald, Roberto; Nowzari, Hessam

    2010-06-01

    Autogenous intramembranous bone graft present several advantages such as minimal resorption and high concentration of bone morphogenetic proteins. A method for measuring the amount of bone that can be harvested from the symphysis area has not been reported in real patients. The aim of the present study was to intrasurgically quantitate the volume of the symphysis bone graft that can be safely harvested in live patients and compare it with AutoCAD (version 16.0, Autodesk, Inc., San Rafael, CA, USA) tomographic calculations. AutoCAD software program quantitated symphysis bone graft in 40 patients using computerized tomographies. Direct intrasurgical measurements were recorded thereafter and compared with AutoCAD data. The bone volume was measured at the recipient sites of a subgroup of 10 patients, 6 months post sinus augmentation. The volume of bone graft measured by AutoCAD averaged 1.4 mL (SD 0.6 mL, range: 0.5-2.7 mL). The volume of bone graft measured intrasurgically averaged 2.3 mL (SD 0.4 mL, range 1.7-2.8 mL). The statistical difference between the two measurement methods was significant. The bone volume measured at the recipient sites 6 months post sinus augmentation averaged 1.9 mL (SD 0.3 mL, range 1.3-2.6 mL) with a mean loss of 0.4 mL. AutoCAD did not overestimate the volume of bone that can be safely harvested from the mandibular symphysis. The use of the design software program may improve surgical treatment planning prior to sinus augmentation.

  11. Complementary Physical and Mechanical Techniques to Characterise Tooth: A Bone-like Tissue

    Institute of Scientific and Technical Information of China (English)

    Peter Zioupos; Keith D. Rogers

    2006-01-01

    Bone like tissues are biocomposites comprising an organic matrix (mostly collagen) and a reinforcement phase in the form of mineral crystals (poorly stoichiometric apatite). The composite properties are a result of the material characteristics of the two phases, their interaction, the relative composition, the orientation and the micro-architecture of the structure. The inherent spatial heterogeneity of these tissues (a result of evolutionary and functional requirements) and their exposure to various environmental and mechanical influences result in highly variable properties on the microscale, which can only be characterised by modern microanalytical methods. We present here results obtained by the complementary use of the modern nanoindentation and micro-X-ray diffraction techniques, which were used to probe the properties and structure of human dentine and enamel of primary molar teeth. The results show that both the addition and the higher organization of mineral within the organic matrix produce stiffer and harder tissue and that the examination of properties within small tissue volumes can be reliably achieved by use of these two methods in parallel. This opens new avenues in the study of biomaterial in general, and for the local characterisation of regions of teeth that suffered bacterial attack, mechanical wear, fluoridisation, chemical bleaching, or dental treatment such as laser ablation or drilling.

  12. 3D Tissue Scaffold Printing On Custom Artificial Bone Applications

    OpenAIRE

    Betül ALDEMİR; DİKİCİ, Serkan; ÖZTÜRK, Şükrü; KAHRAMAN, Ozan; Aylin ŞENDEMİR ÜRKMEZ; Oflaz, Hakan, 1980-

    2015-01-01

    Production of defect-matching scaffolds is the most critical step in custom artificial bone applications. Three dimensional printing (3DP) is one of the best techniques particularly for custom designs on artificial bone applications because of the high controllability and design independency. Our long-term aim is to implant an artificial custom bone that is cultured with patient's own mesenchymal stem cells after determining defect architecture on patient's bone by using CT-scan and printing ...

  13. Bone tissue in different parts of the edentulous maxilla and mandible.

    Science.gov (United States)

    Lindhe, Jan; Bressan, Eriberto; Cecchinato, Denis; Corrá, Enrico; Toia, Marco; Liljenberg, Birgitta

    2013-04-01

    The composition of the fully healed edentulous ridge of the posterior maxilla was recently examined and was found to contain about 50% mineralized bone and 16% bone marrow. The objective was to examine the composition of the tissue of the fully healed ridge in different portions of the maxilla and the mandible in partially dentate subjects. Eighty-seven healthy subjects were included. A trephine drill was used to harvest hard tissue specimens. The biopsies were decalcified, embedded in paraffin, sectioned, stained, and examined using a point-counting procedure. The marginal portion of the jaws almost consistently contained a cortical cap that was significantly wider in the mandible than in the maxilla and twice as wide in the anterior as in the posterior segments of the mandible. Lamellar bone and bone marrow were the dominating tissue elements. Lamellar bone occupied about 63% of the tissue in the mandible and 46% in the maxilla. The maxilla contained about 23% bone marrow as compared to 16% in the mandible. In the mandible, 70% (anterior) and 57% (posterior) were made up of lamellar bone. In the maxilla, the proportion of lamellar bone in the anterior and posterior segments was similar (about 45%). Bone marrow occupied close to 40% of the anterior maxilla, while in the posterior maxilla and the anterior and posterior mandible marrow comprised between 13 and 18%. Marked differences existed with respect to tissue composition of the edentulous ridge between the maxilla and the mandible. The cortical crest was wider in the mandible than in the maxilla, and widest in the symphysis region of the mandible. The proportion of bone marrow was greater in the maxilla than in the mandible. The maxillary front tooth region was poor in lamellar bone but rich in bone marrow, while the anterior mandible contained large amounts of mineralized bone but small amounts of bone marrow. © 2012 John Wiley & Sons A/S.

  14. Biomimetic stratified scaffold design for ligament-to-bone interface tissue engineering.

    Science.gov (United States)

    Lu, Helen H; Spalazzi, Jeffrey P

    2009-07-01

    The emphasis in the field of orthopaedic tissue engineering is on imparting biomimetic functionality to tissue engineered bone or soft tissue grafts and enabling their translation to the clinic. A significant challenge in achieving extended graft functionality is engineering the biological fixation of these grafts with each other as well as with the host environment. Biological fixation will require re-establishment of the structure-function relationship inherent at the native soft tissue-to-bone interface on these tissue engineered grafts. To this end, strategic biomimicry must be incorporated into advanced scaffold design. To facilitate integration between distinct tissue types (e.g., bone with soft tissues such as cartilage, ligament, or tendon), a stratified or multi-phasic scaffold with distinct yet continuous tissue regions is required to pre-engineer the interface between bone and soft tissues. Using the ACL-to-bone interface as a model system, this review outlines the strategies for stratified scaffold design for interface tissue engineering, focusing on identifying the relevant design parameters derived from an understanding of the structure-function relationship inherent at the soft-to-hard tissue interface. The design approach centers on first addressing the challenge of soft tissue-to-bone integration ex vivo, and then subsequently focusing on the relatively less difficult task of bone-to-bone integration in vivo. In addition, we will review stratified scaffold design aimed at exercising spatial control over heterotypic cellular interactions, which are critical for facilitating the formation and maintenance of distinct yet continuous multi-tissue regions. Finally, potential challenges and future directions in this emerging area of advanced scaffold design will be discussed.

  15. Preparation and characterization of bionic bone structure chitosan/hydroxyapatite scaffold for bone tissue engineering.

    Science.gov (United States)

    Zhang, Jiazhen; Nie, Jingyi; Zhang, Qirong; Li, Youliang; Wang, Zhengke; Hu, Qiaoling

    2014-01-01

    Three-dimensional oriented chitosan (CS)/hydroxyapatite (HA) scaffolds were prepared via in situ precipitation method in this research. Scanning electron microscopy (SEM) images indicated that the scaffolds with acicular nano-HA had the spoke-like, multilayer and porous structure. The SEM of osteoblasts which were polygonal or spindle-shaped on the composite scaffolds after seven-day cell culture showed that the cells grew, adhered, and spread well. The results of X-ray powder diffractometer and Fourier transform infrared spectrometer showed that the mineral particles deposited in the scaffold had phase structure similar to natural bone and confirmed that particles were exactly HA. In vitro biocompatibility evaluation indicated the composite scaffolds showed a higher degree of proliferation of MC3T3-E1 cell compared with the pure CS scaffolds and the CS/HA10 scaffold was the highest one. The CS/HA scaffold also had a higher ratio of adhesion and alkaline phosphate activity value of osteoblasts compared with the pure CS scaffold, and the ratio increased with the increase of HA content. The ALP activity value of composite scaffolds was at least six times of the pure CS scaffolds. The results suggested that the composite scaffolds possessed good biocompatibility. The compressive strength of CS/HA15 increased by 33.07% compared with the pure CS scaffold. This novel porous scaffold with three-dimensional oriented structure might have a potential application in bone tissue engineering.

  16. Ovalbumin-BasedPorous Scaffolds for Bone Tissue Regeneration

    Directory of Open Access Journals (Sweden)

    Gabrielle Farrar

    2010-01-01

    Full Text Available Cell differentiation on glutaraldehyde cross-linked ovalbumin scaffolds was the main focus of this research. Salt leaching and freeze drying were used to create a three-dimensional porous structure. Average pore size was 147.84±40.36 μm and 111.79±30.71 μm for surface and cross sectional area, respectively. Wet compressive strength and elastic modulus were 6.8±3.6 kPa. Average glass transition temperature was 320.1±1.4°C. Scaffolds were sterilized with ethylene oxide prior to seeding MC3T3-E1 cells. Cells were stained with DAPI and Texas red to determine morphology and proliferation. Average cell numbers increased between 4-hour- and 96-hour-cultured scaffolds. Alkaline phosphatase and osteocalcin levels were measured at 3, 7, 14, and 21 days. Differentiation studies showed an increase in osteocalcin at 21 days and alkaline phosphatase levels at 14 days, both indicating differentiation occurred. This work demonstrated the use of ovalbumin scaffolds for a bone tissue engineering application.

  17. Aligned and random nanofibrous nanocomposite scaffolds for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Amir Doustgani

    2013-01-01

    Full Text Available Abstract  Aligned and random nanocomposite nanofibrous scaffolds were electrospun from polycaprolactone (PCL, poly (vinyl alcohol (PVA and hydroxyapatite nanoparticles (nHA. The morphology and mechanical characteristics of the nanofibers were evaluated using scanning electron microscopy and tensile testing, respectively. Scanning electron microscopy revealed fibers with an average diameter of 123 ± 32 nm and 339 ± 107 nm for aligned and random nanofibers, respectively. The mechanical data indicated the higher tensile strength and elastic modulus of aligned nanofibers. The in vitro biocompatibility of aligned and random nanofibrous scaffolds was also assessed by growing mesenchymal stem cells (MSCs, and investigating the proliferation and alkaline phosphatase activity (ALP on different nanofibrous scaffolds. Our  findings  showed  that  the  alignment  orientation  of  nanofibers  enhanced  the osteogenic differentiation of stem cells. The in vitro results showed that the aligned biocomposite nanofibrous scaffolds of PCL/nHA/PVA could be a potential substrate for tissue engineering applications, especially in the field of artificial bone implant.

  18. Smart scaffolds in bone tissue engineering: A systematicreview of literature

    Institute of Scientific and Technical Information of China (English)

    Saeed Reza Motamedian; Sepanta Hosseinpour; Mitra Ghazizadeh Ahsaie; Arash Khojasteh

    2015-01-01

    AIM To improve osteogenic differentiation and attachmentof cells.METHODS: An electronic search was conducted inPubMed from January 2004 to December 2013. Studieswhich performed smart modifications on conventionalbone scaffold materials were included. Scaffoldswith controlled release or encapsulation of bioactivemolecules were not included. Experiments which did notinvestigate response of cells toward the scaffold (cellattachment, proliferation or osteoblastic differentiation)were excluded.RESULTS: Among 1458 studies, 38 met the inclusion andexclusion criteria. The main scaffold varied extensivelyamong the included studies. Smart modificationsincluded addition of growth factors (group Ⅰ-11 studies),extracellular matrix-like molecules (group Ⅱ-13 studies)and nanoparticles (nano-HA) (group Ⅲ-17 studies). In allgroups, surface coating was the most commonly appliedapproach for smart modification of scaffolds. In group I,bone morphogenetic proteins were mainly used as growthfactor stabilized on polycaprolactone (PCL). In groupⅡ, collagen 1 in combination with PCL, hydroxyapatite(HA) and tricalcium phosphate were the most frequentscaffolds used. In the third group, nano-HA with PCL andchitosan were used the most. As variable methods wereused, a thorough and comprehensible compare betweenthe results and approaches was unattainable.CONCLUSION: Regarding the variability in methodologyof these in vitro studies it was demonstrated that smartmodification of scaffolds can improve tissue properties.

  19. Preparation of hybrid biomaterials for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Vilma Conceição Costa

    2007-03-01

    Full Text Available Tissue engineering has evolved from the use of biomaterials for bone substitution that fulfill the clinical demands of biocompatibility, biodegradability, non-immunogeneity, structural strength and porosity. Porous scaffolds have been developed in many forms and materials, but few reached the need of adequate physical, biological and mechanical properties. In the present paper we report the preparation of hybrid porous polyvinyl alcohol (PVA/bioactive glass through the sol-gel route, using partially and fully hydrolyzed polyvinyl alcohol, and perform structural characterization. Hybrids containing PVA and bioactive glass with composition 58SiO2-33CaO-9P2O5 were synthesized by foaming a mixture of polymer solution and bioactive glass sol-gel precursor solution. Sol-gel solution was prepared from mixing tetraethoxysilane (TEOS, triethylphosphate (TEP, and calcium chloride as chemical precursors. The hybrid composites obtained after aging and drying at low temperature were chemically and morphologically characterized through infrared spectroscopy and scanning electron microscopy. The degree of hydrolysis of PVA, concentration of PVA solution and different PVA-bioglass composition ratios affect the synthesis procedure. Synthesis parameters must be very well combined in order to allow foaming and gelation. The hybrid scaffolds obtained exhibited macroporous structure with pore size varying from 50 to 600 µm.

  20. Fabrication of polylactide nanocomposite scaffolds for bone tissue engineering applications

    Energy Technology Data Exchange (ETDEWEB)

    Mkhabela, Vuyiswa J.; Ray, Suprakas Sinha [Department of Applied Chemistry, University of Johannesburg, Doornfontein 2028 (South Africa); DST/CSIR National Centre for Nanostructured Materials, Council for Scientific and Industrial Research, Pretoria 0001 (South Africa)

    2015-05-22

    Highly porous three-dimensional polylactide (PLA) scaffolds were obtained from PLA incorporated with different amounts of chitosan-modified montmorillonite (CS-MMT), through solvent casting and particulate leaching method. The processed scaffolds were tested in vitro for their possible application in bone tissue engineering. Scaffolds were characterized by Focused Ion Beam Scanning Electron Microscopy (FIB SEM), Fourier Transform Infra-Red (FTIR), and X-Ray Diffraction (XRD) to study their structure and intermolecular interactions. Bioresorbability tests in simulated body fluid (pH 7.4) were conducted to assess the response of the scaffolds in a simulated physiological condition. The FIB SEM images of the scaffolds showed a porous architecture with gradual change in morphology with increasing CS-MMT concentration. FTIR analysis revealed the presence of both PLA and CS-MMT particles on the surface of the scaffolds. XRD showed that the crystalline unit cell type was the same for all the scaffolds, and crystallinity decreased with an increase in CS-MMT concentration. The scaffolds were found to be bioresorbable, with rapid bioresorbability on the scaffolds with a high CS-MMT concentration.

  1. Fabrication of polylactide nanocomposite scaffolds for bone tissue engineering applications

    Science.gov (United States)

    Mkhabela, Vuyiswa J.; Ray, Suprakas Sinha

    2015-05-01

    Highly porous three-dimensional polylactide (PLA) scaffolds were obtained from PLA incorporated with different amounts of chitosan-modified montmorillonite (CS-MMT), through solvent casting and particulate leaching method. The processed scaffolds were tested in vitro for their possible application in bone tissue engineering. Scaffolds were characterized by Focused Ion Beam Scanning Electron Microscopy (FIB SEM), Fourier Transform Infra-Red (FTIR), and X-Ray Diffraction (XRD) to study their structure and intermolecular interactions. Bioresorbability tests in simulated body fluid (pH 7.4) were conducted to assess the response of the scaffolds in a simulated physiological condition. The FIB SEM images of the scaffolds showed a porous architecture with gradual change in morphology with increasing CS-MMT concentration. FTIR analysis revealed the presence of both PLA and CS-MMT particles on the surface of the scaffolds. XRD showed that the crystalline unit cell type was the same for all the scaffolds, and crystallinity decreased with an increase in CS-MMT concentration. The scaffolds were found to be bioresorbable, with rapid bioresorbability on the scaffolds with a high CS-MMT concentration.

  2. In vitro osteoinductive potential of porous monetite for bone tissue engineering

    OpenAIRE

    2014-01-01

    Tissue engineering–based bone grafts are emerging as a viable alternative treatment modality to repair and regenerate tissues damaged as a result of disease or injury. The choice of the biomaterial component is a critical determinant of the success of the graft or scaffold; essentially, it must induce and allow native tissue integration, and most importantly mimic the hierarchical structure of the native bone. Calcium ...

  3. Impact of dental implant insertion method on the peri-implant bone tissue: Experimental study

    Directory of Open Access Journals (Sweden)

    Stamatović Novak

    2013-01-01

    Full Text Available Background/Aim. The function of dental implants depends on their stability in bone tissue over extended period of time, i.e. on osseointegration. The process through which osseointegration is achieved depends on several factors, surgical insertion method being one of them. The aim of this study was to histopathologically compare the impact of the surgical method of implant insertion on the peri-implant bone tissue. Methods. The experiment was performed on 9 dogs. Eight weeks following the extraction of lower premolars implants were inserted using the one-stage method on the right mandibular side and two-stage method on the left side. Three months after implantation the animals were sacrificed. Three distinct regions of bone tissue were histopathologically analyzed, the results were scored and compared. Results. In the specimens of one-stage implants increased amount of collagen fibers was found in 5 specimens where tissue necrosis was also observed. Only moderate osteoblastic activity was found in 3 sections. The analysis of bone-to-implant contact region revealed statistically significantly better results regarding the amount of collagen tissue fibers for the implants inserted in the two-stage method (Wa = 59 105, α = 0.05. No necrosis and osteoblastic activity were observed. Conclusion. Better results were achieved by the two-stage method in bone-to-implant contact region regarding the amount of collagen tissue, while the results were identical regarding the osteoblastic activity and bone tissue necrosis. There was no difference between the methods in the bone-implant interface region. In the bone tissue adjacent to the implant the results were identical regarding the amount of collagen tissue, osteoblastic reaction and bone tissue necrosis, while better results were achieved by the two-stage method regarding the number of osteocytes.

  4. From natural bone grafts to tissue engineering therapeutics: Brainstorming on pharmaceutical formulative requirements and challenges.

    Science.gov (United States)

    Baroli, Biancamaria

    2009-04-01

    Tissue engineering is an emerging multidisciplinary field of investigation focused on the regeneration of diseased or injured tissues through the delivery of appropriate molecular and mechanical signals. Therefore, bone tissue engineering covers all the attempts to reestablish a normal physiology or to speed up healing of bone in all musculoskeletal disorders and injuries that are lashing modern societies. This article attempts to give a pharmaceutical perspective on the production of engineered man-made bone grafts that are described as implantable tissue engineering therapeutics, and to highlight the importance of understanding bone composition and structure, as well as osteogenesis and bone healing processes, to improve the design and development of such implants. In addition, special emphasis is given to pharmaceutical aspects that are frequently minimized, but that, instead, may be useful for formulation developments and in vitro/in vivo correlations.

  5. Unusual endosteally formed bone tissue in a patagonian basal sauropodomorph dinosaur.

    Science.gov (United States)

    Cerda, Ignacio A; Chinsamy, Anusuya; Pol, Diego

    2014-08-01

    Mussaurus patagonicus (Dinosauria: Sauropodomorpha) is a basal sauropodomorph from the Late Triassic of southern Argentina that is known from a large number of individuals, including juveniles, subadults, and adults. Here, we report on the occurrence of an unusual bone tissue in an individual of M. patagonicus. The rather atypical bone tissue is located within the femoral medullary cavity and also occurs within several erosion cavities of the midinner part of the cortex. This tissue is well vascularized and is composed of a matrix that consists of abundant and densely packed osteocyte lacunae. Although some features of this tissue resembles avian medullary bone, the histological features are distinctive and share more features with the pathological, reactive bone produced in extant birds in response to a retrovirus-induced disease (avian osteopetrosis). Here, we also discuss and provide histological features to effectively differentiate endosteally formed medullary bone from pathological avian osteopetrosis.

  6. Fabrication and characterization of electrospun osteon mimicking scaffolds for bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Andric, T. [Virginia Tech-Wake Forest School of Biomedical Engineering and Sciences, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States); Sampson, A.C. [Chemical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States); Freeman, J.W., E-mail: jwfreeman@vt.edu [Virginia Tech-Wake Forest School of Biomedical Engineering and Sciences, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States)

    2011-01-01

    Skeletal loss and bone deficiencies are a major worldwide problem with over 600,000 procedures performed in the US alone annually, making bone one of the most transplanted tissues, second to blood only. Bone is a composite tissue composed of organic matrix, inorganic bone mineral, and water. Structurally bone is organized into two distinct types: trabecular (or cancellous) and cortical (or compact) bones. Trabecular bone is characterized by an extensive interconnected network of pores. Cortical bone is composed of tightly packed units, called osteons, oriented parallel along to the axis of the bone. While the majority of scaffolds attempt to replicate the structure of the trabecular bone, fewer attempts have been made to create scaffolds to mimic the structure of cortical bone. The aim of this study was to develop a technique to fabricate scaffolds that mimic the organization of an osteon, the structural unit of cortical bone. We successfully built a rotating stage for PGA fibers and utilized it for collecting electrospun nanofibers and creating scaffolds. Resulting scaffolds consisted of concentric layers of electrospun PLLA or gelatin/PLLA nanofibers wrapped around PGA microfiber core with diameters that ranged from 200 to 600 {mu}m. Scaffolds were mineralized by incubation in 10x simulated body fluid, and scaffolds composed of 10%gelatin/PLLA had significantly higher amounts of calcium phosphate. The electrospun scaffolds also supported cellular attachment and proliferation of MC3T3 cells over the period of 28 days.

  7. Biomimetic composite scaffolds containing bioceramics and collagen/gelatin for bone tissue engineering - A mini review.

    Science.gov (United States)

    Kuttappan, Shruthy; Mathew, Dennis; Nair, Manitha B

    2016-12-01

    Bone is a natural composite material consisting of an organic phase (collagen) and a mineral phase (calcium phosphate, especially hydroxyapatite). The strength of bone is attributed to the apatite, while the collagen fibrils are responsible for the toughness and visco-elasticity. The challenge in bone tissue engineering is to develop such biomimetic composite scaffolds, having a balance between biological and biomechanical properties. This review summarizes the current state of the field by outlining composite scaffolds made of gelatin/collagen in combination with bioactive ceramics for bone tissue engineering application.

  8. Effects of gas produced by degradation of Mg–Zn–Zr Alloy on cancellous bone tissue

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jingbo; Jiang, Hongfeng [Tianjin Hospital, 300211 Tianjin (China); Bi, Yanze; Sun, Jin e; Chen, Minfang; Liu, Debao [School of Materials Science and Engineering, Tianjin University of Technology, 300384 Tianjin (China)

    2015-10-01

    Mg–Zn–Zr alloy cylinders were implanted into the femoral condyles of Japanese big-ear white rabbits. X-ray showed that by 12 weeks following implantation the implant became obscure, around which the low-density area appeared and enlarged. By 24 weeks, the implant was more obscure and the density of the surrounding cancellous bone increased. Scanning electron microscopy examination showed bone tissue on the surface of the alloy attached by living fibers at 12 weeks. Micro-CT confirmed that new bone tissue on the surface of the residual alloy implant increased from 12 weeks to 24 weeks. By 12 weeks, many cavities in the cancellous bone tissue around the implant were noted with a CT value, similar to gas value, and increasing by 24 weeks (P < 0.01). Histological examination of hard tissue slices showed that bone tissue was visibly attached to the alloy in the femoral condyle at 12 weeks. The trabecular bone tissues became more intact and dense, and the cavities were filled with soft tissue at 24 weeks. In general, gas produced by the degradation of the Mg–Zn–Zr alloy can cause cavitation within cancellous bone, which does not affect osteogenesis of Mg alloy. - Highlights: • The degradation of Mg alloy in cancellous bone causes cavitation around the alloy. • At first, the CT value of the cavities is similar to the gas value. • The area of the cavities enlarges gradually by 12 weeks. • The cavities are filled with bone tissue and soft tissue gradually.

  9. Recent progresses in gene delivery-based bone tissue engineering.

    Science.gov (United States)

    Lu, Chia-Hsin; Chang, Yu-Han; Lin, Shih-Yeh; Li, Kuei-Chang; Hu, Yu-Chen

    2013-12-01

    Gene therapy has converged with bone engineering over the past decade, by which a variety of therapeutic genes have been delivered to stimulate bone repair. These genes can be administered via in vivo or ex vivo approach using either viral or nonviral vectors. This article reviews the fundamental aspects and recent progresses in the gene therapy-based bone engineering, with emphasis on the new genes, viral vectors and gene delivery approaches.

  10. Semipermanent Volumization by an Absorbable Filler: Onlay Injection Technique to the Bone

    Directory of Open Access Journals (Sweden)

    Takanobu Mashiko, MD

    2013-04-01

    Conclusions: Semipermanent volumizing effects can be achieved by HA injection if the target area has an underlying bony floor. Periosteal stem cells may be activated by HA injection and may contribute to persistent volumizing effects. This treatment may be a much less invasive alternative to fat or bone grafting.

  11. Instrumental and laboratory assessment of stressful remodelling processes in bone tissue at total hip replacement

    Directory of Open Access Journals (Sweden)

    E.V. Karjakina

    2010-06-01

    Full Text Available Research objective is to estimate stressful remodelling features of bone tissue according to the densitometry data and to the level of biochemical markers of bone resorption and formation in total hip replacement (THR. Bone tissue mineral density (BTMD, condition of calcium-phosphoric metabolism and biochemical markers of bone formation (osteocalcin and bone isoenzyme of alkaline phosphatase and resorption (С-terminal bodypeptide of the I type collagen have been determined in 52 patients with coxarthrosis of ll-lll stages with marked joint dysfunction before and after THR. The control group included 24 donors. The data were considered to be reliable when the probability index was р<0,05. The reliable (р<0,05 change of BTMD was determined only in 3-6 months after the operation, whereas the change of biochemical markers of remodeling had already been done after 1,5-3 months, allowing to define the group of patients with obvious negative bone balance: strong predominance of resorption processes without compensation of the subsequent adequate osteogenesis, that subsequently could lead to significant bone tissue deficiency in the area adjacent to the endoprosthesis. Changes of indices of calcium-phosphoric metabolism were not certain during the investigation term. ln conclusion it is to state that biochemical markers of remodeling in comparison with BTMD allow to estimate objectively features of adaptive bone tissue remodeling after THR in earlier periods and to define group of patients with sharp intensification of metabolism and obvious negative bone balance

  12. Thermostability of bone tissue after immobilization induced osteopenia in a rat model.

    Directory of Open Access Journals (Sweden)

    Krzysztof Wójtowicz

    2008-12-01

    Full Text Available Immobilization of load-bearing bones results in imbalance of bone turnover followed by bone loss and impairment of its mechanical function. The question is whether immobilization induced bone loss is accompanied by deterioration of properties of the bone tissue components. Thermally induced transformations of collagen reflect the overall condition of the structure and cross-links in collagen network. The aim of the present study was to investigate whether immobilization induced osteopenia effects stability of collagen in bone tissue. Bone loss was developed by unilateral hindlimb immobilization in adult rats. Effects of unloading on cortical tissue from tibiae were studied after three weeks of unloading (I3R0 and four weeks after remobilization and free convalescence (I3R4 in both tibiae. Thermodynamic parameters of collagen degradation in bone were determined from differential scanning calorimetry (DSC analysis of partially dehydrated cortical bone samples from tibiae in the range of temperatures from 60 degrees C up to 300 degrees C. All bone samples were thermally very stable showing first clear endothermal process with a peak temperature within a range from 150 degrees C to 169 degrees C, for different samples. The next endotherm, wider and flatter, was observed between 245-298 degrees C with a peak at 255 degrees C - 260 degrees C. There were significant side-to-side (right to left differences for both endothermal processes in tibiae samples from experimental groups: I3R0 and I3R4. Immobilization of load-bearing bones influences stability of collagen in bone tissue. Free remobilization was not sufficient for recovery of thermal parameters of bone.

  13. SU-E-T-13: A Comparative Dosimetric Study On Radio-Dynamic Therapy for Pelvic Cancer Treatment: Strategies for Bone Marrow Dose and Volume Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Li, C [Fox Chase Cancer Center, Philadelphia, PA (United States); Renmin Hospital of Wuhan University, Wuhan, Hubei Province (China); Wang, B; Dong, Z; Ma, C [Fox Chase Cancer Center, Philadelphia, PA (United States); Ge, W; Xu, L [Renmin Hospital of Wuhan University, Wuhan, Hubei Province (China)

    2015-06-15

    Purpose: Radio-dynamic therapy (RDT) is a potentially effective modality for local and systemic cancer treatment. Using RDT, the administration of a radio-sensitizer enhances the biological effect of high-energy photons. Although the sensitizer uptake ratio of tumor to normal tissue is normally high, one cannot simply neglect its effect on critical structures. In this study, we aim to explore planning strategies to improve bone marrow sparing without compromising the plan quality for RDT treatment of pelvic cancers. Methods: Ten cervical and ten prostate cancer patients who previously received radiotherapy at our institution were selected for this study. For each patient, nine plans were created using the Varian Eclipse treatmentplanning-system (TPS) with 3D-CRT, IMRT, and VMAT delivery techniques containing various gantry angle combinations and optimization parameters (dose constraints to the bone marrow). To evaluate the plans for bone marrow sparing, the dose-volume parameters V5, V10, V15, V20, V30, and V40 for bone marrow were examined. Effective doseenhancement factors for the sensitizer were used to weigh the dose-volume histograms for various tissues from individual fractions. Results: The planning strategies had different impacts on bone marrow sparing for the cervical and prostate cases. For the cervical cases, provided the bone marrow constraints were properly set during optimization, the dose to bone marrow sparing was found to be comparable between different IMRT and VMAT plans regardless of the gantry angle selection. For the prostate cases, however, careful selection of gantry angles could dramatically improve the bone marrow sparing, although the dose distribution in bone marrow was clinically acceptable for all prostate plans that we created. Conclusion: For intensity-modulated RDT planning for cervical cancer, planners should set bone marrow constraints properly to avoid any adverse damage, while for prostate cancer one can carefully select gantry

  14. Three-dimensional volume analysis of vasculature in engineered tissues

    Science.gov (United States)

    YousefHussien, Mohammed; Garvin, Kelley; Dalecki, Diane; Saber, Eli; Helguera, María.

    2013-01-01

    Three-dimensional textural and volumetric image analysis holds great potential in understanding the image data produced by multi-photon microscopy. In this paper, an algorithm that quantitatively analyzes the texture and the morphology of vasculature in engineered tissues is proposed. The investigated 3D artificial tissues consist of Human Umbilical Vein Endothelial Cells (HUVEC) embedded in collagen exposed to two regimes of ultrasound standing wave fields under different pressure conditions. Textural features were evaluated using the normalized Gray-Scale Cooccurrence Matrix (GLCM) combined with Gray-Level Run Length Matrix (GLRLM) analysis. To minimize error resulting from any possible volume rotation and to provide a comprehensive textural analysis, an averaged version of nine GLCM and GLRLM orientations is used. To evaluate volumetric features, an automatic threshold using the gray level mean value is utilized. Results show that our analysis is able to differentiate among the exposed samples, due to morphological changes induced by the standing wave fields. Furthermore, we demonstrate that providing more textural parameters than what is currently being reported in the literature, enhances the quantitative understanding of the heterogeneity of artificial tissues.

  15. A TETRACYCLINE LABELING STUDY OF SUBCHONDRAL BONE TISSUES IN OSTEOARTHRITIC HIP JOINT

    Institute of Scientific and Technical Information of China (English)

    徐荣辉; 柴本甫

    1992-01-01

    Seven female patients (mean age of 56 years) with advanced hip joint osteoarthritis underwent total hip replacement. Four days before operation they were given oral tetracycline for two days. During operation specimens were taken from the white articular cartilage, the yellowish articular cartilage and the ivory bone together with their subchondral bone tissues. The undecalcified specimens were cut into 10 μm sections and observed under the fluorescence microscope. In all the specimens the following findings could be observed. 1. The osteoarthritic articular cartilage became thinner, with uneven surface and fissures. 2. The superficial and deep surfaces and the central part of the subchondral bone plate showed bright golden yellow fluorescence. It reflected extensive new bone formation. 3. The subchondral bone trabeculae also revealed bright golden yellow fluorescence on their peripheral borders, so trabeculae turned thicker obviously. 4. The marrow tissues between the bone trabeculae exhibited particulate or spherical bright golden yellow fluorescence, reflecting new bone formation in the marrow. The particulate and spherical bright golden yellow fluorescent materials might aggregate, enlarge and merge into large piece of new bone and they also fused with the neighbouring bone trabeculae. The aforementioned changes in the structure of the subchondral bone tissues increased greatly the mass in the osteoarthritic femoral head.

  16. Imaging regenerating bone tissue based on neural networks applied to micro-diffraction measurements

    Energy Technology Data Exchange (ETDEWEB)

    Campi, G.; Pezzotti, G. [Institute of Crystallography, CNR, via Salaria Km 29.300, I-00015, Monterotondo Roma (Italy); Fratini, M. [Centro Fermi -Museo Storico della Fisica e Centro Studi e Ricerche ' Enrico Fermi' , Roma (Italy); Ricci, A. [Deutsches Elektronen-Synchrotron DESY, Notkestraße 85, D-22607 Hamburg (Germany); Burghammer, M. [European Synchrotron Radiation Facility, B. P. 220, F-38043 Grenoble Cedex (France); Cancedda, R.; Mastrogiacomo, M. [Istituto Nazionale per la Ricerca sul Cancro, and Dipartimento di Medicina Sperimentale dell' Università di Genova and AUO San Martino Istituto Nazionale per la Ricerca sul Cancro, Largo R. Benzi 10, 16132, Genova (Italy); Bukreeva, I.; Cedola, A. [Institute for Chemical and Physical Process, CNR, c/o Physics Dep. at Sapienza University, P-le A. Moro 5, 00185, Roma (Italy)

    2013-12-16

    We monitored bone regeneration in a tissue engineering approach. To visualize and understand the structural evolution, the samples have been measured by X-ray micro-diffraction. We find that bone tissue regeneration proceeds through a multi-step mechanism, each step providing a specific diffraction signal. The large amount of data have been classified according to their structure and associated to the process they came from combining Neural Networks algorithms with least square pattern analysis. In this way, we obtain spatial maps of the different components of the tissues visualizing the complex kinetic at the base of the bone regeneration.

  17. Histological Features and Biocompatibility of Bone and Soft Tissue Substitutes in the Atrophic Alveolar Ridge Reconstruction

    Directory of Open Access Journals (Sweden)

    Carlo Maiorana

    2016-01-01

    Full Text Available The reconstruction of the atrophic alveolar ridges for implant placement is today a common procedure in dentistry daily practice. The surgical reconstruction provides for the optimization of the supporting bone for the implants and a restoration of the amount of keratinized gingiva for esthetic and functional reasons. In the past, tissue regeneration has been performed with autogenous bone and free gingival or connective tissue grafts. Nowadays, bone substitutes and specific collagen matrix allow for a complete restoration of the atrophic ridge without invasive harvesting procedures. A maxillary reconstruction of an atrophic ridge by means of tissue substitutes and its histological features are then presented.

  18. Breast Cancer Cell Colonization of the Human Bone Marrow Adipose Tissue Niche

    Directory of Open Access Journals (Sweden)

    Zach S. Templeton

    2015-12-01

    Full Text Available BACKGROUND/OBJECTIVES: Bone is a preferred site of breast cancer metastasis, suggesting the presence of tissue-specific features that attract and promote the outgrowth of breast cancer cells. We sought to identify parameters of human bone tissue associated with breast cancer cell osteotropism and colonization in the metastatic niche. METHODS: Migration and colonization patterns of MDA-MB-231-fLuc-EGFP (luciferase-enhanced green fluorescence protein and MCF-7-fLuc-EGFP breast cancer cells were studied in co-culture with cancellous bone tissue fragments isolated from 14 hip arthroplasties. Breast cancer cell migration into tissues and toward tissue-conditioned medium was measured in Transwell migration chambers using bioluminescence imaging and analyzed as a function of secreted factors measured by multiplex immunoassay. Patterns of breast cancer cell colonization were evaluated with fluorescence microscopy and immunohistochemistry. RESULTS: Enhanced MDA-MB-231-fLuc-EGFP breast cancer cell migration to bone-conditioned versus control medium was observed in 12/14 specimens (P = .0014 and correlated significantly with increasing levels of the adipokines/cytokines leptin (P = .006 and IL-1β (P = .001 in univariate and multivariate regression analyses. Fluorescence microscopy and immunohistochemistry of fragments underscored the extreme adiposity of adult human bone tissues and revealed extensive breast cancer cell colonization within the marrow adipose tissue compartment. CONCLUSIONS: Our results show that breast cancer cells migrate to human bone tissue-conditioned medium in association with increasing levels of leptin and IL-1β, and colonize the bone marrow adipose tissue compartment of cultured fragments. Bone marrow adipose tissue and its molecular signals may be important but understudied components of the breast cancer metastatic niche.

  19. Effect of intervening tissues on ultrasonic backscatter measurements of bone: An in vitro study.

    Science.gov (United States)

    Hoffmeister, Brent K; Spinolo, P Luke; Sellers, Mark E; Marshall, Peyton L; Viano, Ann M; Lee, Sang-Rok

    2015-10-01

    Ultrasonic backscatter techniques are being developed to diagnose osteoporosis. Tissues that lie between the transducer and the ultrasonically interrogated region of bone may produce errors in backscatter measurements. The goal of this study is to investigate the effects of intervening tissues on ultrasonic backscatter measurements of bone. Measurements were performed on 24 cube shaped specimens of human cancellous bone using a 5 MHz transducer. Measurements were repeated after adding a 1 mm thick plate of cortical bone to simulate the bone cortex and a 3 cm thick phantom to simulate soft tissue at the hip. Signals were analyzed to determine three apparent backscatter parameters (apparent integrated backscatter, frequency slope of apparent backscatter, and frequency intercept of apparent backscatter) and three backscatter difference parameters [normalized mean backscatter difference (nMBD), normalized slope of the backscatter difference, and normalized intercept of the backscatter difference]. The apparent backscatter parameters were impacted significantly by the presence of intervening tissues. In contrast, the backscatter difference parameters were not affected by intervening tissues. However, only one backscatter difference parameter, nMBD, demonstrated a strong correlation with bone mineral density. Thus, among the six parameters tested, nMBD may be the best choice for in vivo backscatter measurements of bone when intervening tissues are present.

  20. Changes in functional activity of bone tissue cells under space flight conditions.

    Science.gov (United States)

    Rodionova, Natalia; Nesterenko, Olga; Kabitskaya, Olga

    The space flight conditions affect considerably the state of bone tissue, leading to the development of osteoporosis and osteopenia. Many aspects of reactions of bone tissue cells still remain unclear until now. With the use of electron microscopy we studied the samples gathered from the femoral bonеs metaphyses of rats flown on board the space laboratory (Spacelab - 2) during 2 weeks and samples from tibial bones of mice C57 Black ( Bion М-1). It was established, that under microgravity conditions there occur remodelling processes in a spongy bone related with a deficit of support load. In this work the main attention is focused on studying the ultrastructure of osteogenetic cells and osteoclasts. The degree of differentiation and functional state are evaluated according to the degree of development of organelles for specific biosynthesis: rough endoplasmic reticulum (RER), Golgy complex (GC), as well as the state of mitochondria and cell nucleus. As compared with a synchronous control, the population of osteogenetic cells from zones of bone reconstruction shows a decrease in the number of functionally active forms. We can judge of this from the reduction of a specific volume of RER, GC, mitochondria in osteoblasts. RER loses architectonics typical for osteoblasts and, as against the control, is represented by short narrow canaliculi distributed throughout the cytoplasm; some canals disintegrate. GC is slightly pronounced, mitochondria become smaller in size and acquire an optically dark matrix. These phenomena are supposed to be associated with the desorganization of microtubules and microfilaments in the cells under microgravity conditions. The population of osteogenetic cells shows a decrease in the number of differentiating osteoblasts and an increase in the number of little-differentiated stromal cells. In the population of osteoblasts, degrading and apoptotic cells are sometimes encountered. Such zones show a numerical increase of monocytic cells and

  1. Effects of gas produced by degradation of Mg-Zn-Zr Alloy on cancellous bone tissue.

    Science.gov (United States)

    Wang, Jingbo; Jiang, Hongfeng; Bi, Yanze; Sun, Jin e; Chen, Minfang; Liu, Debao

    2015-10-01

    Mg-Zn-Zr alloy cylinders were implanted into the femoral condyles of Japanese big-ear white rabbits. X-ray showed that by 12 weeks following implantation the implant became obscure, around which the low-density area appeared and enlarged. By 24 weeks, the implant was more obscure and the density of the surrounding cancellous bone increased. Scanning electron microscopy examination showed bone tissue on the surface of the alloy attached by living fibers at 12 weeks. Micro-CT confirmed that new bone tissue on the surface of the residual alloy implant increased from 12 weeks to 24 weeks. By 12 weeks, many cavities in the cancellous bone tissue around the implant were noted with a CT value, similar to gas value, and increasing by 24 weeks (PZr alloy can cause cavitation within cancellous bone, which does not affect osteogenesis of Mg alloy. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Bone And Soft Tissue Changes In Patients With Spinal Cord Injury And Multiple Sclerosis

    Directory of Open Access Journals (Sweden)

    Dionyssiotis Yannis

    2014-12-01

    Full Text Available In patients with spinal cord injury and multiple sclerosis, deterioration of body composition (changes in bone, fat and muscle mass is associated with increased risk for diseases such as coronary artery heart disease, non-insulin dependent diabetes mellitus, lipid metabolism abnormalities, and osteoporotic fractures in these patients. Immobility leads to a changing pattern of loading in the paralyzed areas, and secondary alteration in structure. However, bone and soft tissue changes in these patients are usually neglected. The purpose of this article is to update on the pathophysiological mechanisms leading to bone and soft tissue changes, and to increase the awareness of the treating physicians with respect to bone, muscle and fat loss and their consequences aiming to obtain measures to prevent bone and soft tissue loss in these patients.

  3. Osteoimmunology: the study of the relationship between the immune system and bone tissue.

    Science.gov (United States)

    Arboleya, Luis; Castañeda, Santos

    2013-01-01

    Bone tissue is a highly regulated structure, which plays an essential role in various physiological functions. Through autocrine and paracrine mechanisms, bone tissue is involved in hematopoiesis, influencing the fate of hematopoietic stem cells. There are a number of molecules shared by bone cells and immune system cells indicating that there are multiple connections between the immune system and bone tissue. In order to pool all the knowledge concerning both systems, a new discipline known under the term «osteoimmunology» has been developed. Their progress in recent years has been exponential and allowed us to connect and increase our knowledge in areas not seemingly related such as rheumatoid erosion, postmenopausal osteoporosis, bone metastases or periodontal disease. In this review, we have tried to summarize the most important advances that have occurred in the last decade, especially in those areas of interest related to rheumatology. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  4. Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Aldo R. Boccaccini

    2010-07-01

    Full Text Available Traditionally, bioactive glasses have been used to fill and restore bone defects. More recently, this category of biomaterials has become an emerging research field for bone tissue engineering applications. Here, we review and discuss current knowledge on porous bone tissue engineering scaffolds on the basis of melt-derived bioactive silicate glass compositions and relevant composite structures. Starting with an excerpt on the history of bioactive glasses, as well as on fundamental requirements for bone tissue engineering scaffolds, a detailed overview on recent developments of bioactive glass and glass-ceramic scaffolds will be given, including a summary of common fabrication methods and a discussion on the microstructural-mechanical properties of scaffolds in relation to human bone (structure-property and structure-function relationship. In addition, ion release effects of bioactive glasses concerning osteogenic and angiogenic responses are addressed. Finally, areas of future research are highlighted in this review.

  5. Magnesium substitution in brushite cements for enhanced bone tissue regeneration.

    Science.gov (United States)

    Cabrejos-Azama, Jatsue; Alkhraisat, Mohammad Hamdan; Rueda, Carmen; Torres, Jesús; Blanco, Luis; López-Cabarcos, Enrique

    2014-10-01

    We have synthesized calcium phosphate cements doped with different amounts of magnesium (Mg-CPC) with a twofold purpose: i) to evaluate in vitro the osteoblast cell response to this material, and ii) to compare the bone regeneration capacity of the doped material with a calcium cement prepared without magnesium (CPC). Cell proliferation and in vivo response increased in the Mg-CPCs in comparison with CPC. The Mg-CPCs have promoted higher new bone formation than the CPC (p<0.05). The cytocompatibility and histomorfometric analysis performed in the rabbit calvaria showed that the incorporation of magnesium ions in CPC improves osteoblasts proliferation and provides higher new bone formation. The development of a bone substitute with controllable biodegradable properties and improved bone regeneration can be considered a step toward personalized therapy that can adapt to patient needs and clinical situations.

  6. Regeneration of damaged osteoporotic bone tissue with synthetic biomaterials

    Directory of Open Access Journals (Sweden)

    Petrović Nenad D.

    2014-01-01

    Full Text Available In some cases in oral and maxillofacial surgery, bone regeneration is required in large quantities. One of these cases is osteoporosis. This paper aims to show the new approach to solving this problem of impaired healing of bone defects in the jaw, as well as in other bones, with the use of synthetic biomaterials whose properties resemble the natural bone. Latest development in this area present an effort to create local drug-delivery systems for BMPs and growth factors, direct delivery of MSCs, as well as scaffolds for osteoconduction and also to utilize nanotechnology to synthesize composite biomaterials, predominantly based on HAp and polymers, that would mimic the natural bone nanocomposite architecture. There is also a tendency to create injectable biomaterials for simplified application.

  7. Three-dimensional analysis of craniofacial bones and soft tissues in obstructive sleep apnea using cone beam computed tomography.

    Science.gov (United States)

    Bruwier, Annick; Poirrier, Robert; Albert, Adelin; Maes, Nathalie; Limme, Michel; Charavet, Carole; Milicevic, Mladen; Raskin, Sylvianne; Poirrier, Anne-Lise

    2016-12-01

    A total of 154 adult patients with sleep complaints underwent a polysomnography and a craniofacial cone beam computed tomography (CBCT). OSA was defined as an apnea and hypopnea index (AHI) or an oxygen desaturation index (ODI) ≥ 10. Soft tissues and craniofacial bones volumes were prospectively measured by CBCT and collected blindly from sleep polysomnography. Among the study patients, 127 (83%) suffered from OSA and 27 (17%) did not. OSA patients demonstrated a narrower maxillo-palatine core volume (11.7±3.2 vs 14.6±4.9cm(3)) even when adjusting for age, gender, height, neck circumference and body mass index. These upper airway measures provide a comprehensive analysis of bony structures and soft tissues, which can be involved in OSA.

  8. Quantitation of mandibular ramus volume as a source of bone grafting.

    Science.gov (United States)

    Verdugo, Fernando; Simonian, Krikor; Smith McDonald, Roberto; Nowzari, Hessam

    2009-10-01

    When alveolar atrophy impairs dental implant placement, ridge augmentation using mandibular ramus graft may be considered. In live patients, however, an accurate calculation of the amount of bone that can be safely harvested from the ramus has not been reported. The use of a software program to perform these calculations can aid in preventing surgical complications. The aim of the present study was to intra-surgically quantify the volume of the ramus bone graft that can be safely harvested in live patients, and compare it to presurgical computerized tomographic calculations. The AutoCAD software program quantified ramus bone graft in 40 consecutive patients from computerized tomographies. Direct intra-surgical measurements were recorded thereafter and compared to software data (n = 10). In these 10 patients, the bone volume was also measured at the recipient sites 6 months post-sinus augmentation. The mandibular second and third molar areas provided the thickest cortical graft averaging 2.8 +/- 0.6 mm. The thinnest bone was immediately posterior to the third molar (1.9 +/- 0.3 mm). The volume of ramus bone graft measured by AutoCAD averaged 0.8 mL (standard deviation [SD] 0.2 mL, range: 0.4-1.2 mL). The volume of bone graft measured intra-surgically averaged 2.5 mL (SD 0.4 mL, range: 1.8-3.0 mL). The difference between the two measurement methods was significant (p AutoCAD software program did not overestimate the volume of bone that can be safely harvested from the mandibular ramus.

  9. Human dental pulp stem cell is a promising autologous seed cell for bone tissue engineering

    Institute of Scientific and Technical Information of China (English)

    LI Jing-hui; LIU Da-yong; ZHANG Fang-ming; WANG Fan; ZHANG Wen-kui; ZHANG Zhen-ting

    2011-01-01

    Background The seed cell is a core problem in bone tissue engineering research.Recent research indicates that human dental pulp stem cells (hDPSCs) can differentiate into osteoblasts in vitro,which suggests that they may become a new kind of seed cells for bone tissue engineering.The aim of this study was to evaluate the osteogenic differentiation of hDPSCs in vitro and bone-like tissue formation when transplanted with three-dimensional gelatin scaffolds in vivo,and hDPSCs may become appropriate seed cells for bone tissue engineering.Methods We have utilized enzymatic digestion to obtain hDPSCs from dental pulp tissue extracted during orthodontic treatment.After culturing and expansion to three passages,the cells were seeded in 6-well plates or on three-dimensional gelatin scaffolds and cultured in osteogenic medium.After 14 days in culture,the three-dimensional gelatin scaffolds were implanted subcutaneously in nude mice for 4 weeks.In 6-well plate culture,osteogenesis was assessed by alkaline phosphatase staining,Von Kossa staining,and reverse transcription-polymerase chain reaction (RT-PCR) analysis of the osteogenesis-specific genes type I collagen (COL l),bone sialoprotein (BSP),osteocalcin (OCN),RUNX2,and osterix (OSX).In three-dimensional gelatin scaffold culture,X-rays,hematoxylin/eosin staining,and immunohistochemical staining were used to examine bone formation.Results In vitro studies revealed that hDPSCs do possess osteogenic differentiation potential.In vivo studies revealed that hDPSCs seeded on gelatin scaffolds can form bone structures in heterotopic sites of nude mice.Conclusions These findings suggested that hDPSCs may be valuable as seed cells for bone tissue engineering.As a special stem cell source,hDPSCs may blaze a new path for bone tissue engineering.

  10. Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering

    DEFF Research Database (Denmark)

    Chen, Muwan; Le, Dang Quang Svend; Baatrup, Anette

    2011-01-01

    It is of high clinical relevance in bone tissue engineering that scaffolds promote a high seeding efficiency of cells capable of osteogenic differentiation, such as human bone marrow-derived mesenchymal stem cells (hMSCs). We evaluated the effects of a novel polycaprolactone (PCL) scaffold on h...

  11. Lamellar bone is an incremental tissue reconciling enamel rhythms, body size, and organismal life history.

    Science.gov (United States)

    Bromage, Timothy G; Lacruz, Rodrigo S; Hogg, Russell; Goldman, Haviva M; McFarlin, Shannon C; Warshaw, Johanna; Dirks, Wendy; Perez-Ochoa, Alejandro; Smolyar, Igor; Enlow, Donald H; Boyde, Alan

    2009-05-01

    Mammalian enamel formation is periodic, including fluctuations attributable to the daily biological clock as well as longer-period oscillations that enigmatically correlate with body mass. Because the scaling of bone mass to body mass is an axiom of vertebrate hard tissue biology, we consider that long-period enamel formation rhythms may reflect corresponding and heretofore unrecognized rhythms in bone growth. The principal aim of this study is to seek a rhythm in bone growth demonstrably related to enamel oscillatory development. Our analytical approach is based in morphology, using a variety of hard tissue microscopy techniques. We first ascertain the relationship among long-period enamel rhythms, the striae of Retzius, and body mass using a large sample of mammalian taxa. In addition, we test whether osteocyte lacuna density (a surrogate for rates of cell proliferation) in bone is correlated with mammalian body mass. Finally, using fluorescently labeled developing bone tissues, we investigate whether the bone lamella, a fundamental microanatomical unit of bone, relates to rhythmic enamel growth increments. Our results confirm a positive correlation between long-period enamel rhythms and body mass and a negative correlation between osteocyte density and body mass. We also confirm that lamellar bone is an incremental tissue, one lamella formed in the species-specific time dependency of striae of Retzius formation. We conclude by contextualizing our morphological research with a current understanding of autonomic regulatory control of the skeleton and body mass, suggesting a central contribution to the coordination of organismal life history and body mass.

  12. Mandibular Bone and Soft Tissues Necrosis Caused by an Arsenical Endodontic Preparation Treated with Piezoelectric Device

    Directory of Open Access Journals (Sweden)

    A. Giudice

    2013-01-01

    Full Text Available This paper describes a case of wide mandibular bone necrosis associated with significant soft tissues injury after using an arsenical endodontic preparation in the right lower second molar for endodontic purpose. Authors debate about the hazardous effects of the arsenic paste and the usefulness of piezosurgery for treatment of this drug related bone necrosis.

  13. Assessment of bone formation capacity using in vivo transplantation assays: procedure and tissue analysis

    DEFF Research Database (Denmark)

    Abdallah, Basem; Ditzel, Nicholas; Kassem, Moustapha

    2008-01-01

    ) in immunodeficient mice is the standard method for in vivo assessment of bone formation capacity of a particular cell type. The method is easy to perform and provides reproducible results. Assessment of the donor origin of tissue formation is possible, especially in the case of human-to-mouse transplanta tion...... transplantation methods in testing bone formationpotential of human mesenchymal stem cells....

  14. Open forward and inverse problems in theoretical modeling of bone tissue adaptation.

    Science.gov (United States)

    Zadpoor, Amir Abbas

    2013-11-01

    Theoretical modeling of bone tissue adaptation started several decades ago. Many important problems have been addressed in this area of research during the last decades. However, many important questions remain unanswered. In this paper, an overview of open problems in theoretical modeling of bone tissue adaptation is presented. First, the principal elements of bone tissue adaptation models are defined and briefly reviewed. Based on these principal elements, four categories of open problems are identified. Two of these categories primarily include forward problems, while two others include inverse problems. In every one of the identified categories, important open problems are highlighted and their importance is discussed. It is shown that most of previous studies on the theoretical modeling of bone tissue adaptation have been focused on the problems of the first category and not much is done in three other categories. The paper tries to highlight these potentially important problems that have been so far largely overlooked and to inspire new avenues of research.

  15. A Systematic Review on Complications of Tissue Preservation Surgical Techniques in Percutaneous Bone Conduction Hearing Devices

    NARCIS (Netherlands)

    Verheij, Emmy; Bezdjian, Aren; Grolman, Wilko; Thomeer, Hans

    OBJECTIVE:: To investigate skin-related postoperative complications from tissue preservation approaches in percutaneous bone conduction device (BCD) implantations. DATA SOURCES:: PubMed, Embase, and Cochrane Library. STUDY SELECTION:: We identified studies on BCDs including the opted surgical

  16. Microhardness of Bone Tissue After Different Alloy Implantation

    Directory of Open Access Journals (Sweden)

    Nataliia Zaitseva

    2015-09-01

    Full Text Available Integral indicator of bone quality is microhardness, which depends both on the condition of the inorganic component and the quality of the extracellular organic matrix. There are a lot of researches indicated microhardness changes around the metal implants, but it is not clear how it change distant from injured place. The aim of our research was to determine the microhardness of the femoral bone at different terms after the implantation of metal alloys with different composition. 65 rabbits were random in 5 groups – intact, control (bone defect and 3 experimental. We used TiVT6 alloy with high elasticity module and β- (Ti-Zr alloy with low Young module for the experimental groups. All alloys were implanted in distal epiphysis of femur. Bone microhardness was detected in periimplanted zone as well as in middle of diaphysis and proximal epiphysis. Injury of bone leads to a decrease in the hardness in the zone of the defec as well as in distal zones, followed by recovery up to 6 month. Use the classic high-modulus alloy TiVT6 leads to a significant decrease in the microhardness of all sections of bone in the early and late postoperative period. Implantation of low modulus alloy β (Ti-Zr leads to a reduction of hardness just after 1 and 3 months after the injury, and the use of hydroxyapatite coating significantly reduces the loss of bone quality at all times after implantation.

  17. Bone tissue response to plasma-nitrided titanium implant surfaces

    Directory of Open Access Journals (Sweden)

    Emanuela Prado FERRAZ

    2015-02-01

    Full Text Available A current goal of dental implant research is the development of titanium (Ti surfaces to improve osseointegration. Plasma nitriding treatments generate surfaces that favor osteoblast differentiation, a key event to the process of osteogenesis. Based on this, it is possible to hypothesize that plasma-nitrided Ti implants may positively impact osseointegration. Objective The aim of this study was to evaluate the in vivo bone response to Ti surfaces modified by plasma-nitriding treatments. Material and Methods Surface treatments consisted of 20% N2 and 80% H2, 450°C and 1.5 mbar during 1 h for planar and 3 h for hollow cathode. Untreated surface was used as control. Ten implants of each surface were placed into rabbit tibiae and 6 weeks post-implantation they were harvested for histological and histomorphometric analyses. Results Bone formation was observed in contact with all implants without statistically significant differences among the evaluated surfaces in terms of bone-to-implant contact, bone area between threads, and bone area within the mirror area. Conclusion Our results indicate that plasma nitriding treatments generate Ti implants that induce similar bone response to the untreated ones. Thus, as these treatments improve the physico-chemical properties of Ti without affecting its biocompatibility, they could be combined with modifications that favor bone formation in order to develop new implant surfaces.

  18. Bone tissue response to plasma-nitrided titanium implant surfaces.

    Science.gov (United States)

    Ferraz, Emanuela Prado; Sverzut, Alexander Tadeu; Freitas, Gileade Pereira; Sá, Juliana Carvalho; Alves, Clodomiro; Beloti, Marcio Mateus; Rosa, Adalberto Luiz

    2015-01-01

    A current goal of dental implant research is the development of titanium (Ti) surfaces to improve osseointegration. Plasma nitriding treatments generate surfaces that favor osteoblast differentiation, a key event to the process of osteogenesis. Based on this, it is possible to hypothesize that plasma-nitrided Ti implants may positively impact osseointegration. Objective The aim of this study was to evaluate the in vivo bone response to Ti surfaces modified by plasma-nitriding treatments. Material and Methods Surface treatments consisted of 20% N2 and 80% H2, 450°C and 1.5 mbar during 1 h for planar and 3 h for hollow cathode. Untreated surface was used as control. Ten implants of each surface were placed into rabbit tibiae and 6 weeks post-implantation they were harvested for histological and histomorphometric analyses. Results Bone formation was observed in contact with all implants without statistically significant differences among the evaluated surfaces in terms of bone-to-implant contact, bone area between threads, and bone area within the mirror area. Conclusion Our results indicate that plasma nitriding treatments generate Ti implants that induce similar bone response to the untreated ones. Thus, as these treatments improve the physico-chemical properties of Ti without affecting its biocompatibility, they could be combined with modifications that favor bone formation in order to develop new implant surfaces.

  19. Magnesium substitution in brushite cements for enhanced bone tissue regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Cabrejos-Azama, Jatsue, E-mail: jacaza@farm.ucm.es [Departamento de Química-Física II, Facultad de Farmacia, UCM, Madrid (Spain); Departamento de Estomatología III, Facultad de Odontología UCM, Madrid (Spain); Alkhraisat, Mohammad Hamdan; Rueda, Carmen [Departamento de Química-Física II, Facultad de Farmacia, UCM, Madrid (Spain); Torres, Jesús [Facultad de Ciencias de la salud URJC, Alcorcón, Madrid (Spain); Blanco, Luis [Departamento de Estomatología III, Facultad de Odontología UCM, Madrid (Spain); López-Cabarcos, Enrique [Departamento de Química-Física II, Facultad de Farmacia, UCM, Madrid (Spain)

    2014-10-01

    We have synthesized calcium phosphate cements doped with different amounts of magnesium (Mg-CPC) with a twofold purpose: i) to evaluate in vitro the osteoblast cell response to this material, and ii) to compare the bone regeneration capacity of the doped material with a calcium cement prepared without magnesium (CPC). Cell proliferation and in vivo response increased in the Mg-CPCs in comparison with CPC. The Mg-CPCs have promoted higher new bone formation than the CPC (p < 0.05). The cytocompatibility and histomorfometric analysis performed in the rabbit calvaria showed that the incorporation of magnesium ions in CPC improves osteoblasts proliferation and provides higher new bone formation. The development of a bone substitute with controllable biodegradable properties and improved bone regeneration can be considered a step toward personalized therapy that can adapt to patient needs and clinical situations. - Highlights: • The Mg-CPCs promote higher new bone formation than the CPC. • The incorporation of magnesium ions in CPC improves osteoblasts proliferation. • Mg-CPC is a bone substitute with controllable biodegradable properties. • We suggest that the use of Mg ions could improve the clinical efficiency of CPCs.

  20. Pulmonary tissue volume in dogs during pulmonary edema.

    Science.gov (United States)

    Peterson, B T; Petrini, M F; Hyde, R W; Schreiner, B F

    1978-05-01

    Pulmonary tissue volume (Vt) and pulmonary capillary blood flow (Qc) were measured in anesthetized dogs by analyzing end-expiratory concentrations of dimethyl ether (DME), acetylene (C2H2), and sulfur hexafluoride during a 30-s rebreathing maneuver. Vt was compared to the postmortem lung weight of control dogs and dogs with hemodynamic and nonhemodynamic (alloxan) pulmonary edema. Qc was compared to the cardiac output measured by dye dilution. A 100-ml increase in alveolar volume (VA) in the range of 1-2 liters resulted in a 9 +/- 3 ml increase in Vt. Vt measured at a VA of 1.9 liters measures 114 +/- 18% of the postmortem lung weight in 20 control dogs and in 6 dogs with moderate edema (lung weight smae mean values of Vt, but the reproducibility of a series of 3-7 measurements was greater with DME (coefficient of variation was 5% with DME and 8% C2H2). Qc measured 96 +/ 15% of the cardiac output during the rebreathing maneuver, but the maneuver caused a 4-40% fall in the cardiac output. These data show that Vt determined by rebreathing DME is between 86% and 135% of the lung weight in dogs with pulmonary edema until the lung weight is greater than 250% of the predicted value.

  1. Bioceramic-collagen scaffolds loaded with human adipose-tissue derived stem cells for bone tissue engineering.

    Science.gov (United States)

    Daei-Farshbaf, Neda; Ardeshirylajimi, Abdolreza; Seyedjafari, Ehsan; Piryaei, Abbas; Fadaei Fathabady, Fatemeh; Hedayati, Mehdi; Salehi, Mohammad; Soleimani, Masoud; Nazarian, Hamid; Moradi, Sadegh-Lotfalah; Norouzian, Mohsen

    2014-02-01

    The combination of bioceramics and stem cells has attracted the interest of research community for bone tissue engineering applications. In the present study, a combination of Bio-Oss(®) and type 1 collagen gel as scaffold were loaded with human adipose-tissue derived mesenchymal stem cells (AT-MSCs) after isolation and characterization, and the capacity of them for bone regeneration was investigated in rat critical size defects using digital mammography, multi-slice spiral computed tomography imaging and histological analysis. 8 weeks after implantation, no mortality or sign of inflammation was observed in the site of defect. According to the results of imaging analysis, a higher level of bone regeneration was observed in the rats receiving Bio-Oss(®)-Gel compared to untreated group. In addition, MSC-seeded Bio-Oss-Gel induced the highest bone reconstruction among all groups. Histological staining confirmed these findings and impressive osseointegration was observed in MSC-seeded Bio-Oss-Gel compared with Bio-Oss-Gel. On the whole, it was demonstrated that combination of AT-MSCs, Bio-Oss and Gel synergistically enhanced bone regeneration and reconstruction and also could serve as an appropriate structure to bone regenerative medicine and tissue engineering application.

  2. Engineered polycaprolactone–magnesium hybrid biodegradable porous scaffold for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Hoi Man Wong

    2014-10-01

    Full Text Available In this paper, we describe the fabrication of a new biodegradable porous scaffold composed of polycaprolactone (PCL and magnesium (Mg micro-particles. The compressive modulus of PCL porous scaffold was increased to at least 150% by incorporating 29% Mg particles with the porosity of 74% using Micro-CT analysis. Surprisingly, the compressive modulus of this scaffold was further increased to at least 236% when the silane-coupled Mg particles were added. In terms of cell viability, the scaffold modified with Mg particles significantly convinced the attachment and growth of osteoblasts as compared with the pure PCL scaffold. In addition, the hybrid scaffold was able to attract the formation of apatite layer over its surface after 7 days of immersion in normal culture medium, whereas it was not observed on the pure PCL scaffold. This in vitro result indicated the enhanced bioactivity of the modified scaffold. Moreover, enhanced bone forming ability was also observed in the rat model after 3 months of implantation. Though bony in-growth was found in all the implanted scaffolds. High volume of new bone formation could be found in the Mg/PCL hybrid scaffolds when compared to the pure PCL scaffold. Both pure PCL and Mg/PCL hybrid scaffolds were degraded after 3 months. However, no tissue inflammation was observed. In conclusion, these promising results suggested that the incorporation of Mg micro-particles into PCL porous scaffold could significantly enhance its mechanical and biological properties. This modified porous bio-scaffold may potentially apply in the surgical management of large bone defect fixation.

  3. Engineered polycaprolactone-magnesium hybrid biodegradable porous scaffold for bone tissue engineering

    Institute of Scientific and Technical Information of China (English)

    Hoi Man Wong; Paul K. Chu; Frankie K.L. Leung; Kenneth M.C. Cheung; Keith D.K. Luk; Kelvin W.K. Yeung

    2014-01-01

    In this paper, we describe the fabrication of a new biodegradable porous scaffold composed of polycaprolactone (PCL) and magnesium (Mg) micro-particles. The compressive modulus of PCL porous scaffold was increased to at least 150%by incorporating 29%Mg particles with the porosity of 74%using Micro-CT analysis. Surprisingly, the compressive modulus of this scaffold was further increased to at least 236%when the silane-coupled Mg particles were added. In terms of cell viability, the scaffold modified with Mg particles significantly convinced the attachment and growth of osteoblasts as compared with the pure PCL scaffold. In addition, the hybrid scaffold was able to attract the formation of apatite layer over its surface after 7 days of immersion in normal culture medium, whereas it was not observed on the pure PCL scaffold. This in vitro result indicated the enhanced bioactivity of the modified scaffold. Moreover, enhanced bone forming ability was also observed in the rat model after 3 months of implantation. Though bony in-growth was found in all the implanted scaffolds. High volume of new bone formation could be found in the Mg/PCL hybrid scaffolds when compared to the pure PCL scaffold. Both pure PCL and Mg/PCL hybrid scaffolds were degraded after 3 months. However, no tissue inflammation was observed. In conclusion, these promising results suggested that the incorporation of Mg micro-particles into PCL porous scaffold could significantly enhance its mechanical and biological properties. This modified porous bio-scaffold may potentially apply in the surgical management of large bone defect fixation.

  4. Impact of dental implant insertion method on the peri-implant bone tissue: Experimental study

    OpenAIRE

    Stamatović Novak; Matić Smiljana; Tatić Zoran; Petković-Ćurčin Aleksandra; Vojvodić Danilo; Rakić Mia

    2013-01-01

    Background/Aim. The function of dental implants depends on their stability in bone tissue over extended period of time, i.e. on osseointegration. The process through which osseointegration is achieved depends on several factors, surgical insertion method being one of them. The aim of this study was to histopathologically compare the impact of the surgical method of implant insertion on the peri-implant bone tissue. Methods. The experiment was performed on 9 dogs. Eight weeks following t...

  5. Bone Regeneration Based on Tissue Engineering Conceptions-A 21st Century Perspective

    Institute of Scientific and Technical Information of China (English)

    Jan Henkel; Maria A. Woodruff; Devakara R. Epari; Roland Steck; Vaida Glatt; Ian C. Dickinson; Peter FM Choong; Michael A. Schuetz; Dietmar W. Hutmacher

    2013-01-01

    The role of Bone Tissue Engineering in the field of Regenerative Medicine has been the topic of substantial research over the past two decades. Technological advances have improved orthopaedic implants and surgical techniques for bone reconstruction. However, improvements in surgical techniques to reconstruct bone have been limited by the paucity of autologous materials available and donor site morbidity. Recent advances in the development of biomaterials have provided attractive alternatives to bone grafting expanding the surgical options for restoring the form and function of injured bone. Specifically, novel bioactive (second generation) biomaterials have been developed that are characterised by controlled action and reaction to the host tissue environment, whilst exhibiting controlled chemical breakdown and resorption with an ultimate replacement by regenerating tissue. Future generations of biomaterials (third generation) are designed to be not only osteo-conductive but also osteoinductive, i.e. to stimulate regeneration of host tissues by combining tissue engineer-ing and in situ tissue regeneration methods with a focus on novel applications. These techniques will lead to novel possibilities for tissue regeneration and repair. At present, tissue engineered constructs that may find future use as bone grafts for complex skeletal defects, whether from post-traumatic, degenerative, neoplastic or congenital/developmental“origin”require osseous reconstruction to ensure structural and functional integrity. Engineering functional bone using combinations of cells, scaffolds and bioactive factors is a promising strategy and a particular feature for future development in the area of hybrid materials which are able to exhibit suitable biomimetic and mechanical properties. This review will discuss the state of the art in this field and what we can expect from future generations of bone regeneration concepts.

  6. In-vitro analysis of the effect of gentamicin and polyhexanide on bone tissue.

    Science.gov (United States)

    Kock, Hans-Jürgen; Ernst, Dirk; Jethon, Frank; Fabry, Werner

    2013-04-01

    Though anti-infectives have been used for a long time in surgical procedures, the effect on bone tissue has not been determined for most antibiotics and antiseptics. In our in vitro study, 4x4x8 mm(3) blocks of rabbit cancellous bone tissue were incubated with Ringer's solution, gentamicin and Lavasorb(®) each for time intervals of 15 minutes, 30 minutes, one hour, four hours and eight hours. Samples were examined double blinded through optical and electron microscopy. Tissue degeneration was observed in all samples. It was low in Ringer's solution. Samples with Lavasorb showed a moderate degeneration after 15 and 30 minutes, which was accelerated after one hour. Gentamicin led to a moderate degeneration of bone tissue after 15 and 30 minutes and to a more accelerated degeneration after one hour. The effect of gentamicin on bone tissue was more pronounced than the effect of Lavasorb. This investigation showed that local application of Lavasorb or gentamicin on bone tissue should be restricted to 30 minutes, while Lavasorb showed a better tissue tolerability. This finding could have clinical implications for the management of wounds with open osseous tissue and should be further investigated by in vivo studies.

  7. Human bone hardness seems to depend on tissue type but not on anatomical site in the long bones of an old subject.

    Science.gov (United States)

    Ohman, Caroline; Zwierzak, Iwona; Baleani, Massimiliano; Viceconti, Marco

    2013-02-01

    It has been hypothesised that among different human subjects, the bone tissue quality varies as a function of the bone segment morphology. The aim of this study was to assess and compare the quality, evaluated in terms of hardness of packages of lamellae, of cortical and trabecular bones, at different anatomical sites within the human skeleton. The contralateral six long bones of an old human subject were indented at different levels along the diaphysis and at both epiphyses of each bone. Hardness value, which is correlated to the degree of mineralisation, of both cortical and trabecular bone tissues was calculated for each indentation location. It was found that the cortical bone tissue was harder (+18%) than the trabecular one. In general, the bone hardness was found to be locally highly heterogeneous. In fact, considering one single slice obtained for a bone segment, the coefficient of variation of the hardness values was up to 12% for cortical bone and up to 17% for trabecular bone. However, the tissue hardness was on average quite homogeneous within and among the long bones of the studied donor, although differences up to 9% among levels and up to 7% among bone segments were found. These findings seem not to support the mentioned hypothesis, at least not for the long bones of an old subject.

  8. Low-intensity electrical stimulation counteracts the effects of ovariectomy on bone tissue of rats: effects on bone microarchitecture, viability of osteocytes, and nitric oxide expression.

    Science.gov (United States)

    Lirani-Galvão, A P R; Chavassieux, P; Portero-Muzy, N; Bergamaschi, C T; Silva, O L; Carvalho, A B; Lazaretti-Castro, M; Delmas, P D

    2009-06-01

    Low Intensity Electrical Stimulation (LIES) has been used for bone repair, but little is known about its effects on bone after menopause. Osteocytes probably play a role in mediating this physical stimulus and they could act as transducers through the release of biochemical signals, such as nitric oxide (NO). The aim of the present study was to investigate the effects of LIES on bone structure and remodeling, NOS expression and osteocyte viability in ovariectomized (OVX) rats. Thirty rats (200-220 g) were divided into 3 groups: SHAM, OVX, and OVX subjected to LIES (OVX + LIES) for 12 weeks. Following the protocol, rats were sacrificed and tibias were collected for histomorphometric analysis and immunohistochemical detection of endothelial NO synthase (eNOS), inducible NOS (iNOS), and osteocyte apoptosis (caspase-3 and TUNEL). OVX rats showed significant (p bone volume (10% vs. 25%) and trabecular number (1.7 vs. 3.9), and increased eroded surfaces (4.7% vs. 3.2%) and mineralization surfaces (15.9% vs. 7.7%). In contrast, after LIES, all these parameters were significantly different from OVX but not different from SHAM. eNOS and iNOS were similarly expressed in subperiosteal regions of tibiae cortices of SHAM, not expressed in OVX, and similarly expressed in OVX + LIES when compared to SHAM. In OVX, the percentage of apoptotic osteocytes (24%) was significantly increased when compared to SHAM (11%) and OVX + LIES (8%). Our results suggest that LIES counteracts some effects of OVX on bone tissue preserving bone structure and microarchitecture, iNOS and eNOS expression, and osteocyte viability.

  9. Visceral adipose tissue area measurement at a single level: can it represent visceral adipose tissue volume?

    Science.gov (United States)

    Noumura, Yusuke; Kamishima, Tamotsu; Sutherland, Kenneth; Nishimura, Hideho

    2017-08-01

    Measurement of visceral adipose tissue (VAT) needs to be accurate and sensitive to change for risk monitoring. The purpose of this study is to determine the CT slice location where VAT area can best reflect changes in VAT volume and body weight. 60 plain abdominal CT images from 30 males [mean age (range) 51 (41-68) years, mean body weight (range) 71.1 (101.9-50.9) kg] who underwent workplace screenings twice within a 1-year interval were evaluated. Automatically calculated and manually corrected areas of the VAT of various scan levels using "freeform curve" region of interest on CT were recorded and compared with body weight changes. The strongest correlations of VAT area with VAT volume and body weight changes were shown in a slice 3 cm above the lower margin of L3 with r values of 0.853 and 0.902, respectively. VAT area measurement at a single level 3 cm above the lower margin of the L3 vertebra is feasible and can reflect changes in VAT volume and body weight. Advances in knowledge: As VAT area at a CT slice 3cm above the lower margin of L3 can best reflect interval changes in VAT volume and body weight, VAT area measurement should be selected at this location.

  10. Mechanical Stimulus Inhibits the Growth of a Bone Tissue Model Cultured In Vitro

    Institute of Scientific and Technical Information of China (English)

    Zong-ming Wan; Lu Liu; Jian-yu Li; Rui-xin Li; Yong Guo; Hao Li; Jian-ming Zhang; Xi-zheng Zhang

    2013-01-01

    Objectives To construct the cancellous bone explant model and a method of culturing these bone tissues in vitro, and to investigate the effect of mechanical load on growth of cancellous bone tissue in vitro. Methods Cancellous bone were extracted from rabbit femoral head and cut into 1-mm-thick and 8-mm-diameter slices under sterile conditions. HE staining and scanning electron microscopy were employed to identify the histomorphology of the model after being cultured with a new dynamic load and circulating perfusion bioreactor system for 0, 3, 5, and 7 days, respectively. We built a three-dimensional model using microCT and analyzed the loading effects using finite element analysis. The model was subjected to mechanical load of 1000, 2000, 3000, and 4000μεrespectively for 30 minutes per day. After 5 days of continuous stimuli, the activities of alkaline phosphatase (AKP) and tartrate-resistant acid phosphatase (TRAP) were detected. Apoptosis was analyzed by DNA ladder detection and caspase-3/8/9 activity detection. Results After being cultured for 3, 5, and 7 days, the bone explant model grew well. HE staining showed the apparent nucleus in cells at the each indicated time, and electron microscope revealed the living cells in the bone tissue. The activities of AKP and TRAP in the bone explant model under mechanical load of 3000 and 4000μεwere significantly lower than those in the unstressed bone tissues (all P Conclusions The cancellous bone explant model extracted from the rabbit femoral head could be alive at least for 7 days in the dynamic load and circulating perfusion bioreactor system, however, pathological mechanical load could affect the bone tissue growth by apoptosis in vitro. The differentiation of osteoblasts and osteoclasts might be inhibited after the model is stimulated by mechanical load of 3000 and 4000με.

  11. Bone tissue engineering via human induced pluripotent, umbilical cord and bone marrow mesenchymal stem cells in rat cranium.

    Science.gov (United States)

    Wang, Ping; Liu, Xian; Zhao, Liang; Weir, Michael D; Sun, Jirun; Chen, Wenchuan; Man, Yi; Xu, Hockin H K

    2015-05-01

    Human induced pluripotent stem cells (hiPSCs) are an exciting cell source with great potential for tissue engineering. Human bone marrow mesenchymal stem cells (hBMSCs) have been used in clinics but are limited by several disadvantages, hence alternative sources of MSCs such as umbilical cord MSCs (hUCMSCs) are being investigated. However, there has been no report comparing hiPSCs, hUCMSCs and hBMSCs for bone regeneration. The objectives of this pilot study were to investigate hiPSCs, hUCMSCs and hBMSCs for bone tissue engineering, and compare their bone regeneration via seeding on biofunctionalized macroporous calcium phosphate cement (CPC) in rat cranial defects. For all three types of cells, approximately 90% of the cells remained alive on CPC scaffolds. Osteogenic genes were up-regulated, and mineral synthesis by cells increased with time in vitro for all three types of cells. The new bone area fractions at 12weeks (mean±sd; n=6) were (30.4±5.8)%, (27.4±9.7)% and (22.6±4.7)% in hiPSC-MSC-CPC, hUCMSC-CPC and hBMSC-CPC respectively, compared to (11.0±6.3)% for control (pcells (p>0.1). New blood vessel density was higher in cell-seeded groups than control (pcells was confirmed via immunohistochemical staining. In conclusion, (1) hiPSCs, hUCMSCs and hBMSCs greatly enhanced bone regeneration, more than doubling the new bone amount of cell-free CPC control; (2) hiPSC-MSCs and hUCMSCs represented viable alternatives to hBMSCs; (3) biofunctionalized macroporous CPC-stem cell constructs had a robust capacity for bone regeneration. Published by Elsevier Ltd.

  12. Age- and direction-related adaptations of lumbar vertebral trabecular bone with respect to apparent stiffness and tissue level stress distribution

    Science.gov (United States)

    Gong, He; Fan, Yubo; Zhang, Ming; Qin, Ling

    2009-02-01

    The objective of this study was to study the age-related adaptation of lumbar vertebral trabecular bone at the apparent level, as well as the tissue level in three orthogonal directions. Ninety trabecular specimens were obtained from six normal L4 vertebral bodies of six male cadavers in two age groups, three aged 62 years and three aged 69 years, and were scanned using a high-resolution micro-computed tomography (micro-CT) system, then converted to micro-finite element models to do micro-finite element analyses. The relationship between apparent stiffness and bone volume fraction, and the tissue level von Mises stress distribution for each trabecular specimen when compressed separately in the longitudinal direction, medial-lateral and anterior-posterior directions (transverse directions) were derived and compared between two age groups. The results showed that at the apparent level, trabecular bones from 69-year group had stiffer bone structure relative to their volume fractions in all three directions, and in both age groups, changes in bone volume fraction could explain more variations in apparent stiffness in the longitudinal direction than the transverse directions; at the tissue level, aging had little effect on the tissue von Mises stress distributions for the compressions in all the three directions. The novelty of the present study was that it provided quantitative assessments on the age and direction-related adaptation of Chinese male lumbar vertebral trabecular bone from two different levels: stiffness at the apparent level and stress distribution at the tissue level. It may help to understand the failure mechanisms and fracture risks of vertebral body associated with aging and direction for the prevention of fracture risks in elder individuals.

  13. Age- and direction-related adaptations of lumbar vertebral trabecular bone with respect to apparent stiffness and tissue level stress distribution

    Institute of Scientific and Technical Information of China (English)

    He Gong; Yubo Fan; Ming Zhang; Ling Qin

    2009-01-01

    The objective of this study was to study the age-related adaptation of lumbar vertebral trabecular bone at the apparent level, as well as the tissue level in three orthog-onal directions. Ninety trabecular specimens were obtained from six normal L4 vertebral bodies of six male cadavers in two age groups, three aged 62 years and three aged 69 years, and were scanned using a high-resolution micro-computed tomography (micro-CT) system, then converted to micro-finite element models to do micro-finite element analyses. The relationship between apparent stiffness and bone volume fraction, and the tissue level von Mises stress distribution for each trabecular specimen when compressed separately in the longitudinal direction, medial-lateral and anterior-posterior directions (transverse directions) were derived and compared between two age groups. The results showed that at the appar-ent level, trabecular bones from 69-year group had stiffer bone structure relative to their volume fractions in all three directions, and in both age groups, changes in bone volume fraction could explain more variations in apparent stiffness in the longitudinal direction than the transverse directions; at the tissue level, aging had little effect on the tissue von Mises stress distributions for the compressions in all the three directions. The novelty of the present study was that it provided quantitative assessments on the age and direction-related adaptation of Chinese male lumbar vertebral trabec-ular bone from two different levels: stiffness at the apparent level and stress distribution at the tissue level. It may help to understand the failure mechanisms and fracture risks of vertebral body associated with aging and direction for the prevention of fracture risks in elder individuals.

  14. [Reaction of bone tissue elements on synthetic bioresorbable materials based on lactic and glycolic acids].

    Science.gov (United States)

    Kulakov, A A; Grigor'ian, A S

    2014-01-01

    The aim of the study was to evaluate the adverse effects of synthetic polymeric bioresorbable materials based on lactic and glycolic acids on the bone tissue. The study was carried-out on 40 Wister-line rats. Four types of bioresorbable polymeric materials were implanted: PolyLactide Glycolide Acid (PLGA), Poly-L-Lactide Acid (PLLA); Poly-96L/4D-Lactide Acid (96/4 PLDLA); Poly-70L/30D-Lactide Acid (70/30 PLDLA). The results showed connective tissue formation (fibrointegration) bordering bone adjacent to implanted materials. This proved the materials to cause pathogenic influence on the bone which mechanisms are described in the article.

  15. Guided tissue regeneration using a collagen barrier and bone swaging technique in noncontained infrabony defects.

    Science.gov (United States)

    Kodama, Toshiro; Minabe, Masato; Sugiyama, Takashi; Mitarai, Eiko; Fushimi, Hajime; Kitsugi, Daisuke; Tsutsumi, Kouji; Katsuki, Makiko

    2013-01-01

    This clinical study evaluated the effectiveness of guided tissue regeneration using a resorbable collagen membrane and bone swaging in noncontained infrabony defects by assessing changes in probing pocket depth, probing attachment level, and radiographic bone level after 6 months, 1 year, and 2 years. Postsurgical clinical and radiographic measurements were statistically significantly different from presurgical measurements. The rate of bone fill was positively associated with the baseline depth of the bone defect but not associated with the width. The noncontained infrabony defects treated with this combined regenerative method improved clinically and radiographically.

  16. Molecular Mechanisms of Soft Tissue Regeneration and Bone Formation in Mice: Implications in Fracture Repair and Wound Healing in Humans

    Science.gov (United States)

    2006-04-01

    control mice and subcongenic lines are indicated by *Pɘ.05. Trab. Vol., represents trabecular volume. Trab. Cnt , represents trabecular content. Tot...4-8), the type I collagen α1 gene (9,10), the type I collagen α2 gene (11), the estrogen receptor (4,9,11-13), insulin-like growth factor-I (14,15...receptor alpha and collagen IA1 genes on bone mineral density in Caucasian women. Calcif Tissue Int 72:643-50. 10. Mezquita-Raya P, Munoz-Torres M

  17. Data set for renal sinus fat volume and visceral adipose tissue volume on computed tomography.

    Science.gov (United States)

    Murakami, Yoko; Nagatani, Yukihiro; Takahashi, Masashi; Ikeda, Mitsuru; Miyazawa, Itsuko; Morino, Katsutaro; Ohkubo, Takayoshi; Maegawa, Hiroshi; Nitta, Norihisa; Sakai, Hiroshi; Nota, Hiromitsu; Ushio, Noritoshi; Murata, Kiyoshi

    2016-06-01

    Renal sinus fat is partially characteristic of peri-vascular adipose tissue, however, RSF volume (RSFV) is associated with visceral adipose tissue (VATV). Therefore, the ratio of RSFV to VATV (RSFV/VATV ratio) can distinguish the importance of RSF as an extension of VAT versus its perivascular effects. We assessed the association of RSFV/VATV ratio with coronary artery calcification score (CACS) in 189 patients with suspected coronary artery disease. RSFV of the right kidney and VATV were quantified by using image data of unenhanced abdominal CT. CACS were measured on unenhanced ECG-gated CT images. This article contains data on explanatory scheme of how to measure RSFV on unenhanced abdominal CT, CT indication and exclusion criteria of study population, sex-adjusted association between RSFV with risk factors of coronary vascular diseases and metabolic indices, multivariate linear regression analysis with CACS as the dependent variable in the total study population. The data are supplemental to our original research article describing detailed association between RSFV/VATV ratio and CACS including sub-groups analyses classified by the age of 70 "Renal sinus fat volume on computed tomography in middle-aged patients at risk for cardiovascular disease and its association with coronary artery calcification" Murakami et al. [1].

  18. Measurement of maxillary sinus volume and available alveolar bone height using computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Hak; Han, Won Jeong; Choi, Young Hi; Kim, Eun Kyung [Dankook University College of Medicine, Seoul (Korea, Republic of)

    2003-03-15

    To aid in determining the volume of graft bone required before a maxillary sinus lift procedure and compare the alveolar bone height measurements taken by panoramic radiographs to those by CT images. Data obtained by both panoramic radiographs and CT examination of 25 patients were used in this study. Maxillary sinus volumes from the antral floor to heights of 5 mm, 10 mm, 15 mm, and 20 mm , were calculated. Alveolar bone height was measured on the panoramic images at each maxillary tooth site and corrected by magnification rate (PBH). Available bone height (ABH) and full bone height (FBH) was measured on reconstructed CT images. PBH was compared with ABH and FBH at the maxillary incisors, canines, premolars, and molars. Volumes of the inferior portion of the sinuses were 0.55 {+-} 0.41 cm{sup 3} for 5 mm lifts, 2.11 {+-} 0.68 cm{sup 3} for 10 mm, 4.26 {+-} 1.32 cm{sup 3} for 15 mm, 6.95 {+-} 2.01 cm{sup 3} for 20 mm. For the alveolar bone measurement, measurements by panoramic images were longer than available bone heights determined by CT images at the incisor and canine areas, and shorter than full bone heights on CT images at incisor, premolar, and molar areas (p<0.001). In bone grafting of the maxillary sinus floor, 0,96 cm{sup 3} or more is required for a 5 mm - lift, 2.79 cm{sup 3} or more for a 10 mm - lift, 5.58 cm{sup 3} or more for a 15 mm - lift, and 8.96 cm{sup 3} or more for a 20 mm - lift. Maxillary implant length determined using panoramic radiograph alone could result in underestimation or overestimation, according to the site involved.

  19. Biodegradable hybrid tissue engineering scaffolds for reconstruction of large bone defects

    Science.gov (United States)

    Barati, Danial

    Complex skeletal injuries and large bone fractures are still a significant clinical problem in US. Approximately 1.5 million Americans (veterans, their families, and civilians) every year suffer from bone loss due to traumatic skeletal injuries, infection, and resection of primary tumors that require extensive grafting to bridge the gap. The US bone graft market is over $2.2 billion a year. Due to insufficient mechanical stability, lack of vascularity, and inadequate resorption of the graft, patients with traumatic large skeletal injuries undergo multiple costly operations followed by extensive recovery steps to maintain proper bone alignment and length. Current strategies for repairing damaged or diseased bones include autologous or allograft bone transplantations. However, limited availability of autografts and risk of disease transmission associated with allografts have necessitated the search for the development of new bone graft options and strategies. The overall goal of this project is to develop a much-needed bone-mimetic engineered graft as a substitute for current strategies providing required bone grafts for reconstruction of large bone defects. This project will use the structure of natural cortical bone as a guide to produce an engineered bone graft with balanced strength, osteogenesis, vascularization, and resorption. The outcome of this project will be a biodegradable hybrid scaffold system (similar to natural cortical bone) including a mechanically strong scaffold allowing for mechanical stability of the load-bearing defect site and a soft and highly porous structure such as a hydrogel phase which will allow for efficient cell and growth factor delivery into the defect implantation site, cell niche establishment and promotion of mineralization. Successful completion of this project will transform bone graft technology for regeneration of complex bone defects from a frozen or freeze-dried allograft to a safe, infection-free, mechanically

  20. Engraftment of Prevascularized, Tissue Engineered Constructs in a Novel Rabbit Segmental Bone Defect Model

    Directory of Open Access Journals (Sweden)

    Alexandre Kaempfen

    2015-06-01

    Full Text Available The gold standard treatment of large segmental bone defects is autologous bone transfer, which suffers from low availability and additional morbidity. Tissue engineered bone able to engraft orthotopically and a suitable animal model for pre-clinical testing are direly needed. This study aimed to evaluate engraftment of tissue-engineered bone with different prevascularization strategies in a novel segmental defect model in the rabbit humerus. Decellularized bone matrix (Tutobone seeded with bone marrow mesenchymal stromal cells was used directly orthotopically or combined with a vessel and inserted immediately (1-step or only after six weeks of subcutaneous “incubation” (2-step. After 12 weeks, histological and radiological assessment was performed. Variable callus formation was observed. No bone formation or remodeling of the graft through TRAP positive osteoclasts could be detected. Instead, a variable amount of necrotic tissue formed. Although necrotic area correlated significantly with amount of vessels and the 2-step strategy had significantly more vessels than the 1-step strategy, no significant reduction of necrotic area was found. In conclusion, the animal model developed here represents a highly challenging situation, for which a suitable engineered bone graft with better prevascularization, better resorbability and higher osteogenicity has yet to be developed.

  1. The effect of osteoporosis treatments on fatigue properties of cortical bone tissue

    Directory of Open Access Journals (Sweden)

    Garry R. Brock

    2015-06-01

    Full Text Available Bisphosphonates are commonly prescribed for treatment of osteoporosis. Long-term use of bisphosphonates has been correlated to atypical femoral fractures (AFFs. AFFs arise from fatigue damage to bone tissue that cannot be repaired due to pharmacologic treatments. Despite fatigue being the primary damage mechanism of AFFs, the effects of osteoporosis treatments on fatigue properties of cortical bone are unknown. To examine if fatigue-life differences occur in bone tissue after different pharmacologic treatments for osteoporosis, we tested bone tissue from the femurs of sheep given a metabolic acidosis diet to induce osteoporosis, followed by treatment with a selective estrogen reception modulator (raloxifene, a bisphosphonate (alendronate or zoledronate, or parathyroid hormone (teriparatide, PTH. Beams of cortical bone tissue were created and tested in four-point bending fatigue to failure. Tissue treated with alendronate had reduced fatigue life and less modulus loss at failure compared with other treatments, while tissue treated with PTH had a prolonged fatigue life. No loss of fatigue life occurred with zoledronate treatment despite its greater binding affinity and potency compared with alendronate. Tissue mineralization measured by microCT did not explain the differences seen in fatigue behavior. Increased fatigue life with PTH suggests that current treatment methods for AFF could have beneficial effects for restoring fatigue life. These results indicate that fatigue life differs with each type of osteoporosis treatment.

  2. Gene Expression Changes in Femoral Head Necrosis of Human Bone Tissue

    Directory of Open Access Journals (Sweden)

    Bernadett Balla

    2011-01-01

    Full Text Available Osteonecrosis of the femoral head (ONFH is the result of an interruption of the local circulation and the injury of vascular supply of bone. Multiple factors have been implicated in the development of the disease. However the mechanism of ischemia and necrosis in non-traumatic ONFH is not clear. The aim of our investigation was to identify genes that are differently expressed in ONFH vs. non-ONFH human bone and to describe the relationships between these genes using multivariate data analysis. Six bone tissue samples from ONFH male patients and 8 bone tissue samples from non-ONFH men were examined. The expression differences of selected 117 genes were analyzed by TaqMan probe-based quantitative real-time RT-PCR system. The significance test indicated marked differences in the expression of nine genes between ONFH and non-ONFH individuals. These altered genes code for collagen molecules, an extracellular matrix digesting metalloproteinase, a transcription factor, an adhesion molecule, and a growth factor. Canonical variates analysis demonstrated that ONFH and non-ONFH bone tissues can be distinguished by the multiple expression profile analysis of numerous genes controlled via canonical TGFB pathway as well as genes coding for extracellular matrix composing collagen type molecules. The markedly altered gene expression profile observed in the ONFH of human bone tissue may provide further insight into the pathogenetic process of osteonecrotic degeneration of bone.

  3. Bone tissue density modification in treatment of shin pseudoarthrosis by transosseous compressive osteosynthesis

    Directory of Open Access Journals (Sweden)

    Tishkov N.V.

    2011-12-01

    Full Text Available Objective is to detect bone mineral density along the shin according to «Esperanto» levels by Hounsfield's scale. Materials and methods. The analysis of density modification in 25 patients with pseudoarthrosis of tibia with predominant localization in a lower one-third of bone has been carried out. Results. By means of computed tomography it has been revealed that the bone tissue density of the tibia in the process of false joint union when using the compressive variant of combined transosseous osteosynthesis has changed according to the regularity reproducing phase character of the accumulation of mineral substances in the bone. Conclution. The growth of mineral density of the bone tissue during treatment spreads in the directions from proximal and distal metaepiphyses to the zone of pseudoarthrosis knitting

  4. A comparative study of diazepam levels in bone marrow versus serum, saliva and brain tissue.

    Science.gov (United States)

    Takatori, T; Tomii, S; Terazawa, K; Nagao, M; Kanamori, M; Tomaru, Y

    1991-01-01

    The distribution of diazepam in biological fluids and tissues of rats was examined 1, 2, 4 and 8 h after intraperitoneal administration by using a radioimmunoassay with specific anti-diazepam antibody. The diazepam levels in serum, saliva, brain and bone marrow decreased over a period of 2 h and levelled off 4 h after administration. The diazepam concentration in bone marrow was much higher than in serum, saliva and brain, suggesting an accumulation of diazepam in this tissue. This indicates that bone marrow could be a very useful material for the detection of diazepam in skeletonized remains. The diazepam concentrations in bone marrow, serum, saliva and brain showed a linear relationship (r = 0.860-0.997), indicating that a valid estimate of diazepam concentration in blood can be made from bone marrow samples.

  5. A piezoelectric actuator-driven loading device for mechanical condition during bone tissue engineering

    Science.gov (United States)

    Zhang, C. Q.; Wu, H.; Dong, X.

    2008-10-01

    Bone cells live in an environment heavily influenced by mechanical forces. The researches of bone cell responses in hard scaffolds under differently mechanical conditions will be greatly beneficial to elucidating the mechanisms of bone mechanotransduction as well as applications of mechanical condition in bone tissue engineering. However, the appropriate device for the experiments is prerequisite. A loading device suitable to hard scaffold for study on mechanical responses of bone cells was made by usage of a kind of long-travel, high-load piezoelectric actuator. The device, which is so small enough to work in a standard incubator, can cause hard scaffolds with directly uniaxial compressive strains with more magnitudes, frequency components, and waveforms, including bone physiologically mechanical state, precisely controlled by a computer. The device achieves precise mechanical conditions by testing verification. The device may produce a model that will be suitable for investigating the influences of mechanical responses on bone cells in 3D hard scaffolds in vitro matching that in cancellous bone in vivo and may be applied during bone tissue engineering culture.

  6. Pulmonary tissue volume in dogs during pulmonary edema

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, B.T.; Petrini, M.F.; Hyde, R.W.; Schreiner, B.F.

    1978-01-01

    Pulmonary tissue volume (Vt) and pulmonary capillary blood flow (Qc) were measured in anesthetized dogs by analyzing end-expiratory concentrations of dimethyl ether (DME), acetylene (C/sub 2/H/sub 2/), and sulfur hexafluoride during a 30-s rebreathing maneuver. Vt was compared to the postmortem lung weight of control dogs and dogs with hemodynamic and nonhemodynamic (alloxan) pulmonary edema. Qc was compared to the cardiac output measured by dye dilution. A 100 ml increase in alveolar volume (Va) in the range of 1 to 2 liters resulted in a 9 +- 3 ml increase in Vt. Vt measured at a Va of 1.9 liters measures 114 +- 18% of the postmortem lung weight in 20 control dogs and in 6 dogs with moderate edema (lung weight <250% of predicted). Vt measured only 53 +- 14% of the lung weight in 11 dogs with more severe edema. DME and C/sub 2/H/sub 2/ gave the same mean values of Vt, but the reproducibility of a series of 3 to 7 measurements was greater with DME (coefficient of variation was 5% with DME and 8% C/sub 2/H/sub 2/). Qc measured 96 +- 15% of the cardiac output during the rebreathing maneuver, but the maneuver caused a 4 to 40% fall in the cardiac output. These data show that Vt determined by rebreathing DME is between 86% and 135% of the lung weight in dogs with pulmonary edema until the lung weight is greater than 250% of the predicted value.

  7. A decreased subchondral trabecular bone tissue elastic modulus is associated with pre-arthritic cartilage damage

    DEFF Research Database (Denmark)

    Day, J; Ding, Ming; van der Linden, JC

    2001-01-01

    In osteoarthritis, one postulate is that changes in the mechanical properties of the subchondral bone layer result in cartilage damage. The goal of this study was to examine changes in subchondral trabecular bone properties at the calcified tissue level in the early stages of cartilage damage....... Finite element models were constructed from microCT scans of trabectilar bone from the proximal tibia of donors with mild cartilage damage and from normal donors. In the donors with cartilage damage, macroscopic damage was present only in the medial compartment. The effective tissue elastic moduli were...... determined using a combination of finite element models and mechanical testing. The bone tissue modulus was reduced by 60% in the medial condyle of the cases with cartilage damage compared to the control specimens. Neither the presence of cartilage damage nor the anatomic site (medial vs. lateral) affected...

  8. Feasibility of endoscopic laser speckle imaging modality in the evaluation of auditory disorder: study in bone-tissue phantom

    Science.gov (United States)

    Yu, Sungkon; Jang, Seulki; Lee, Sangyeob; Park, Jihoon; Ha, Myungjin; Radfar, Edalat; Jung, Byungjo

    2016-03-01

    This study investigates the feasibility of an endoscopic laser speckle imaging modality (ELSIM) in the measurement of perfusion of flowing fluid in optical bone tissue phantom(OBTP). Many studies suggested that the change of cochlear blood flow was correlated with auditory disorder. Cochlear microcirculation occurs under the 200μm thickness bone which is the part of the internal structure of the temporal bone. Concern has been raised regarding of getting correct optical signal from hard tissue. In order to determine the possibility of the measurement of cochlear blood flow under bone tissue using the ELSIM, optical tissue phantom (OTP) mimicking optical properties of temporal bone was applied.

  9. Bone tissue stiffness in the mandibular condyle is dependent on the direction and density of the cancellous structure.

    NARCIS (Netherlands)

    Eijden, T.M. van; Ruijven, L.J. van; Giesen, E.B.W.

    2004-01-01

    Variation in the apparent stiffness of cancellous bone is generally ascribed to variation in cancellous structure and density, while the bone tissue stiffness is assumed to be constant. The purpose of the present study was to examine whether the bone tissue stiffness is dependent on the direction an

  10. Determination of the relationship between collagen cross-links and the bone-tissue stiffness in the porcine mandibular condyle

    NARCIS (Netherlands)

    Willems, N.M.B.K.; Mulder, L.; Bank, R.A.; Grünheid, T.; Toonder, J.M.J. den; Zentner, A.; Langenbach, G.E.J.

    2011-01-01

    Although bone-tissue stiffness is closely related to the degree to which bone has been mineralized, other determinants are yet to be identified. We, therefore, examined the extent to which the mineralization degree, collagen, and its cross-links are related to bone-tissue stiffness. A total of 50 ca

  11. Tannerella forsythia infection-induced calvarial bone and soft tissue transcriptional profiles.

    Science.gov (United States)

    Bakthavatchalu, V; Meka, A; Sathishkumar, S; Lopez, M C; Bhattacharyya, I; Boyce, B F; Mans, J J; Lamont, R J; Baker, H V; Ebersole, J L; Kesavalu, L

    2010-10-01

    Tannerella forsythia is associated with subgingival biofilms in adult periodontitis, although the molecular mechanisms contributing to chronic inflammation and loss of periodontal bone remain unclear. We examined changes in the host transcriptional profiles during a T. forsythia infection using a murine calvarial model of inflammation and bone resorption. Tannerella forsythia was injected into the subcutaneous soft tissue over calvariae of BALB/c mice for 3 days, after which the soft tissues and calvarial bones were excised. RNA was isolated and Murine GeneChip (Affymetrix, Santa Clara, CA) array analysis of transcript profiles showed that 3226 genes were differentially expressed in the infected soft tissues (P < 0.05) and 2586 genes were differentially transcribed in calvarial bones after infection. Quantitative real-time reverse transcription-polymerase chain reaction analysis of transcription levels of selected genes corresponded well with the microarray results. Biological pathways significantly impacted by T. forsythia infection in calvarial bone and soft tissue included leukocyte transendothelial migration, cell adhesion molecules (immune system), extracellular matrix-receptor interaction, adherens junction, and antigen processing and presentation. Histologic examination revealed intense inflammation and increased osteoclasts in calvariae compared with controls. In conclusion, localized T. forsythia infection differentially induces transcription of a broad array of host genes, and the profiles differ between inflamed soft tissues and calvarial bone.

  12. Local mechanical stimuli regulate bone formation and resorption in mice at the tissue level.

    Directory of Open Access Journals (Sweden)

    Friederike A Schulte

    Full Text Available Bone is able to react to changing mechanical demands by adapting its internal microstructure through bone forming and resorbing cells. This process is called bone modeling and remodeling. It is evident that changes in mechanical demands at the organ level must be interpreted at the tissue level where bone (remodeling takes place. Although assumed for a long time, the relationship between the locations of bone formation and resorption and the local mechanical environment is still under debate. The lack of suitable imaging modalities for measuring bone formation and resorption in vivo has made it difficult to assess the mechanoregulation of bone three-dimensionally by experiment. Using in vivo micro-computed tomography and high resolution finite element analysis in living mice, we show that bone formation most likely occurs at sites of high local mechanical strain (p<0.0001 and resorption at sites of low local mechanical strain (p<0.0001. Furthermore, the probability of bone resorption decreases exponentially with increasing mechanical stimulus (R(2 = 0.99 whereas the probability of bone formation follows an exponential growth function to a maximum value (R(2 = 0.99. Moreover, resorption is more strictly controlled than formation in loaded animals, and ovariectomy increases the amount of non-targeted resorption. Our experimental assessment of mechanoregulation at the tissue level does not show any evidence of a lazy zone and suggests that around 80% of all (remodeling can be linked to the mechanical micro-environment. These findings disclose how mechanical stimuli at the tissue level contribute to the regulation of bone adaptation at the organ level.

  13. A histological investigation on tissue responses to titanium implants in cortical bone of the rat femur.

    Science.gov (United States)

    Ohtsu, A; Kusakari, H; Maeda, T; Takano, Y

    1997-03-01

    Implant materials are placed under various sites-including cortical bone, spongy bone, and bone marrow-at the same time according to the depth at implantation. Although cortical bone is an important site for the prognosis of implantation, detailed reports on tissue responses to implantation have been meager. The present study aims to reveal tissue responses to pure titanium implantation in rat femoris cortical bone. The rats received titanium bars surgically in their femurs and were sacrificed 1 day to 40 weeks post-implantation. The prepared tissue specimens were processed for light and transmission electron microscopy (TEM). Further histochemical detections were performed. One day post-implantation, empty osteocytic lacunae indicating degeneration of osteocytes were found in pre-existing cortical bone around the implant. Such pre-existing bone was replaced by new bone, but remained in part even 40 weeks post-implantation. Light microscopy showed that direct contact between the implant and new bone was identified 12 weeks post-implantation. Chronological and ultrastructural observation showed that new bone deposition appeared to proceed toward the implant, and that the intervening layer at the interface was derived from the degenerated debris of multinucleated giant cells and/or osteoblasts. Furthermore, it seemed that the width of intervening layer varied in relation to the distance from the blood vessels. The cells showing tartrate resistant acid phosphatase activity possessed cytological features of osteoclasts under TEM; they were frequently observed in perivascular sites near the implants even after osseointegration, suggesting that bone remodeling took place steadily around the implant.

  14. Bone volume fraction and fabric anisotropy are better determinants of trabecular bone stiffness than other morphological variables.

    Science.gov (United States)

    Maquer, Ghislain; Musy, Sarah N; Wandel, Jasmin; Gross, Thomas; Zysset, Philippe K

    2015-06-01

    As our population ages, more individuals suffer from osteoporosis. This disease leads to impaired trabecular architecture and increased fracture risk. It is essential to understand how morphological and mechanical properties of the cancellous bone are related. Morphology-elasticity relationships based on bone volume fraction (BV/TV) and fabric anisotropy explain up to 98% of the variation in elastic properties. Yet, other morphological variables such as individual trabeculae segmentation (ITS) and trabecular bone score (TBS) could improve the stiffness predictions. A total of 743 micro-computed tomography (μCT) reconstructions of cubic trabecular bone samples extracted from femur, radius, vertebrae, and iliac crest were analyzed. Their morphology was assessed via 25 variables and their stiffness tensor (CFE) was computed from six independent load cases using micro finite element (μFE) analyses. Variance inflation factors were calculated to evaluate collinearity between morphological variables and decide upon their inclusion in morphology-elasticity relationships. The statistically admissible morphological variables were included in a multiple linear regression model of the dependent variable CFE. The contribution of each independent variable was evaluated (ANOVA). Our results show that BV/TV is the best determinant of CFE(r(2) adj  = 0.889), especially in combination with fabric anisotropy (r(2) adj  = 0.968). Including the other independent predictors hardly affected the amount of variance explained by the model (r(2) adj  = 0.975). Across all anatomical sites, BV/TV explained 87% of the variance of the bone elastic properties. Fabric anisotropy further described 10% of the bone stiffness, but the improvement in variance explanation by adding other independent factors was marginal (variables do not bring any further contribution. These overall conclusions remain to be confirmed for specific bone diseases and postelastic properties.

  15. Non-viral gene therapy for bone tissue engineering.

    Science.gov (United States)

    Wegman, Fiona; Oner, F Cumhur; Dhert, Wouter J A; Alblas, Jacqueline

    2013-01-01

    The possibilities of using gene therapy for bone regeneration have been extensively investigated. Improvements in the design of new transfection agents, combining vectors and delivery/release systems to diminish cytotoxicity and increase transfection efficiencies have led to several successful in vitro, ex vivo and in vivo strategies. These include growth factor or short interfering ribonucleic acid (siRNA) delivery, or even enzyme replacement therapies, and have led to increased osteogenic differentiation and bone formation in vivo. These results provide optimism to consider use in humans with some of these gene-delivery strategies in the near future.

  16. [Bone tissue engineering. Reconstruction of critical sized segmental bone defects in the ovine tibia].

    Science.gov (United States)

    Reichert, J C; Epari, D R; Wullschleger, M E; Berner, A; Saifzadeh, S; Nöth, U; Dickinson, I C; Schuetz, M A; Hutmacher, D W

    2012-04-01

    Well-established therapies for bone defects are restricted to bone grafts which face significant disadvantages (limited availability, donor site morbidity, insufficient integration). Therefore, the objective was to develop an alternative approach investigating the regenerative potential of medical grade polycaprolactone-tricalcium phosphate (mPCL-TCP) and silk-hydroxyapatite (silk-HA) scaffolds.Critical sized ovine tibial defects were created and stabilized. Defects were left untreated, reconstructed with autologous bone grafts (ABG) and mPCL-TCP or silk-HA scaffolds. Animals were observed for 12 weeks. X-ray analysis, torsion testing and quantitative computed tomography (CT) analyses were performed. Radiological analysis confirmed the critical nature of the defects. Full defect bridging occurred in the autograft and partial bridging in the mPCL-TCP group. Only little bone formation was observed with silk-HA scaffolds. Biomechanical testing revealed a higher torsional moment/stiffness (p CT analysis a significantly higher amount of bone formation for the ABG group when compared to the silk-HA group. No significant difference was determined between the ABG and mPCL-TCP groups. The results of this study suggest that mPCL-TCP scaffolds combined can serve as an alternative to autologous bone grafting in long bone defect regeneration. The combination of mPCL-TCP with osteogenic cells or growth factors represents an attractive means to further enhance bone formation.

  17. Estrogens increase expression of bone morphogenetic protein 8b in brown adipose tissue of mice

    NARCIS (Netherlands)

    A. Grefhorst (Aldo); J.C. van den Beukel (Anneke); A.F. van Houten (A.); J. Steenbergen (Jacobie); J.A. Visser (Jenny); A.P.N. Themmen (Axel)

    2015-01-01

    textabstractBackground: In mammals, white adipose tissue (WAT) stores fat and brown adipose tissue (BAT) dissipates fat to produce heat. Several studies showed that females have more active BAT. Members of the bone morphogenetic protein (BMP) and fibroblast growth factor (FGF) families are expressed

  18. Bone tissue phantoms for optical flowmeters at large interoptode spacing generated by 3D-stereolithography.

    Science.gov (United States)

    Binzoni, Tiziano; Torricelli, Alessandro; Giust, Remo; Sanguinetti, Bruno; Bernhard, Paul; Spinelli, Lorenzo

    2014-08-01

    A bone tissue phantom prototype allowing to test, in general, optical flowmeters at large interoptode spacings, such as laser-Doppler flowmetry or diffuse correlation spectroscopy, has been developed by 3D-stereolithography technique. It has been demonstrated that complex tissue vascular systems of any geometrical shape can be conceived. Absorption coefficient, reduced scattering coefficient and refractive index of the optical phantom have been measured to ensure that the optical parameters reasonably reproduce real human bone tissue in vivo. An experimental demonstration of a possible use of the optical phantom, utilizing a laser-Doppler flowmeter, is also presented.

  19. Giant cell tumor of bone and tenosynovial tissue : surgical outcome

    NARCIS (Netherlands)

    Heijden, Lizz van der

    2014-01-01

    Giant cell tumor of bone (GCTB) is an intermediate, locally aggressive but rarely metastasizing tumor. Radiologically, GCTB shows typical lytic lesions. MR imaging is required to evaluate extent of GCTB for surgical planning. Preferred treatment for GCTB is extended curettage with local adjuvants, w

  20. Clinical Application of Human Mesenchymal Stromal Cells for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Anindita Chatterjea

    2010-01-01

    Full Text Available The gold standard in the repair of bony defects is autologous bone grafting, even though it has drawbacks in terms of availability and morbidity at the harvesting site. Bone-tissue engineering, in which osteogenic cells and scaffolds are combined, is considered as a potential bone graft substitute strategy. Proof-of-principle for bone tissue engineering using mesenchymal stromal cells (MSCs has been demonstrated in various animal models. In addition, 7 human clinical studies have so far been conducted. Because the experimental design and evaluation parameters of the studies are rather heterogeneous, it is difficult to draw conclusive evidence on the performance of one approach over the other. However, it seems that bone apposition by the grafted MSCs in these studies is observed but not sufficient to bridge large bone defects. In this paper, we discuss the published human clinical studies performed so far for bone-tissue regeneration, using culture-expanded, nongenetically modified MSCs from various sources and extract from it points of consideration for future clinical studies.

  1. Effect of micromorphology of cortical bone tissue on crack propagation under dynamic loading

    Science.gov (United States)

    Wang, Mayao; Gao, Xing; Abdel-Wahab, Adel; Li, Simin; Zimmermann, Elizabeth A.; Riedel, Christoph; Busse, Björn; Silberschmidt, Vadim V.

    2015-09-01

    Structural integrity of bone tissue plays an important role in daily activities of humans. However, traumatic incidents such as sports injuries, collisions and falls can cause bone fracture, servere pain and mobility loss. In addition, ageing and degenerative bone diseases such as osteoporosis can increase the risk of fracture [1]. As a composite-like material, a cortical bone tissue is capable of tolerating moderate fracture/cracks without complete failure. The key to this is its heterogeneously distributed microstructural constituents providing both intrinsic and extrinsic toughening mechanisms. At micro-scale level, cortical bone can be considered as a four-phase composite material consisting of osteons, Haversian canals, cement lines and interstitial matrix. These microstructural constituents can directly affect local distributions of stresses and strains, and, hence, crack initiation and propagation. Therefore, understanding the effect of micromorphology of cortical bone on crack initiation and propagation, especially under dynamic loading regimes is of great importance for fracture risk evaluation. In this study, random microstructures of a cortical bone tissue were modelled with finite elements for four groups: healthy (control), young age, osteoporosis and bisphosphonate-treated, based on osteonal morphometric parameters measured from microscopic images for these groups. The developed models were loaded under the same dynamic loading conditions, representing a direct impact incident, resulting in progressive crack propagation. An extended finite-element method (X-FEM) was implemented to realize solution-dependent crack propagation within the microstructured cortical bone tissues. The obtained simulation results demonstrate significant differences due to micromorphology of cortical bone, in terms of crack propagation characteristics for different groups, with the young group showing highest fracture resistance and the senior group the lowest.

  2. Effect of micromorphology of cortical bone tissue on crack propagation under dynamic loading

    Directory of Open Access Journals (Sweden)

    Wang Mayao

    2015-01-01

    Full Text Available Structural integrity of bone tissue plays an important role in daily activities of humans. However, traumatic incidents such as sports injuries, collisions and falls can cause bone fracture, servere pain and mobility loss. In addition, ageing and degenerative bone diseases such as osteoporosis can increase the risk of fracture [1]. As a composite-like material, a cortical bone tissue is capable of tolerating moderate fracture/cracks without complete failure. The key to this is its heterogeneously distributed microstructural constituents providing both intrinsic and extrinsic toughening mechanisms. At micro-scale level, cortical bone can be considered as a four-phase composite material consisting of osteons, Haversian canals, cement lines and interstitial matrix. These microstructural constituents can directly affect local distributions of stresses and strains, and, hence, crack initiation and propagation. Therefore, understanding the effect of micromorphology of cortical bone on crack initiation and propagation, especially under dynamic loading regimes is of great importance for fracture risk evaluation. In this study, random microstructures of a cortical bone tissue were modelled with finite elements for four groups: healthy (control, young age, osteoporosis and bisphosphonate-treated, based on osteonal morphometric parameters measured from microscopic images for these groups. The developed models were loaded under the same dynamic loading conditions, representing a direct impact incident, resulting in progressive crack propagation. An extended finite-element method (X-FEM was implemented to realize solution-dependent crack propagation within the microstructured cortical bone tissues. The obtained simulation results demonstrate significant differences due to micromorphology of cortical bone, in terms of crack propagation characteristics for different groups, with the young group showing highest fracture resistance and the senior group the

  3. Bilateral maxillary sinus floor augmentation with tissue-engineered autologous osteoblasts and demineralized freeze-dried bone

    Directory of Open Access Journals (Sweden)

    Aashish Deshmukh

    2015-01-01

    Full Text Available The pneumatization of the maxillary sinus often results in a lack of sufficient alveolar bone for implant placement. In the last decades, maxillary sinus lift has become a very popular procedure with predictable results. Sinus floor augmentation procedures are generally carried out using autologous bone grafts, bone substitutes, or composites of bone and bone substitutes. However, the inherent limitations associated with each of these, have directed the attention of investigators to new technologies like bone tissue engineering. Bone marrow stromal cells have been regarded as multi-potent cells residing in bone marrow. These cells can be harvested from a person, multiplied outside his body using bioengineering principles and technologies and later introduced into a tissue defect. We present a case where tissue-engineered autologous osteoblasts were used along with demineralized freeze-dried bone for sinus floor augmentation.

  4. The estrogen antagonist ICI 182,780 reduces cancellous bone volume in female rats.

    Science.gov (United States)

    Gallagher, A; Chambers, T J; Tobias, J H

    1993-12-01

    Although estrogen is thought to protect the skeleton by inhibiting bone resorption, we have also found that in the rat, estrogen stimulates cancellous bone formation. However, the extent to which the various skeletal actions of estrogen are mediated by classical estrogen receptors remains unclear. Although estrogen receptor antagonists such as tamoxifen have been used to study this question, interpretation of the results is complicated by the fact that this agent also acts as a partial estrogen agonist. However, the recent development of estrogen antagonists devoid of agonist activity provides an opportunity to explore this question further. We, therefore, investigated the effect of administration of the pure estrogen antagonist ICI 182,780 on the skeleton of adult female rats. We found that ICI 182,780 reduced bone volume at the proximal tibial metaphysis by approximately 30%, associated with an increase in osteoclast surface. We then investigated the effect of ICI 182,780 on the anabolic action of estrogen. We used ovariectomized rats treated with 3-amino-1-hydroxypropylidene-1-bisphosphonate to inhibit bone resorption, thereby preventing any increase in bone formation as a result of the stimulation of bone resorption due to estrogen deficiency. 17 beta-Estradiol (1 micrograms/kg) stimulated cancellous bone formation in such animals by approximately 8-fold; this increase was abolished when ICI 182,780 was also given. In contrast, ICI 182,780 affected neither longitudinal nor periosteal tibial growth in either intact animals or ovariectomized rats given estradiol or vehicle. We conclude that ICI 182,780 reduces cancellous bone volume in the rat by antagonizing estrogen's actions on bone formation and resorption, suggesting that these processes are both mediated by classical estrogen receptors.

  5. Boron containing poly-(lactide-co-glycolide) (PLGA) scaffolds for bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Doğan, Ayşegül; Demirci, Selami [Department of Genetics and Bioengineering, Faculty of Engineering and Architecture, Yeditepe University 34755 Istanbul (Turkey); Bayir, Yasin [Department of Biochemistry, Faculty of Pharmacy, Ataturk University, 25240, Erzurum (Turkey); Halici, Zekai [Department of Pharmacology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Karakus, Emre [Department of Pharmacology and Toxicology, Faculty of Veterinary Medicine, Ataturk University, 25240, Erzurum (Turkey); Aydin, Ali [Department of Orthopedics and Traumatology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Cadirci, Elif [Department of Pharmacology, Faculty of Pharmacy, Ataturk University, 25240, Erzurum (Turkey); Albayrak, Abdulmecit [Department of Pharmacology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Demirci, Elif [Department of Pathology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Karaman, Adem [Department of Radiology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Ayan, Arif Kursat [Department of Nuclear Medicine, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Gundogdu, Cemal [Department of Pathology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Şahin, Fikrettin, E-mail: fsahin@yeditepe.edu.tr [Department of Genetics and Bioengineering, Faculty of Engineering and Architecture, Yeditepe University 34755 Istanbul (Turkey)

    2014-11-01

    Scaffold-based bone defect reconstructions still face many challenges due to their inadequate osteoinductive and osteoconductive properties. Various biocompatible and biodegradable scaffolds, combined with proper cell type and biochemical signal molecules, have attracted significant interest in hard tissue engineering approaches. In the present study, we have evaluated the effects of boron incorporation into poly-(lactide-co-glycolide-acid) (PLGA) scaffolds, with or without rat adipose-derived stem cells (rADSCs), on bone healing in vitro and in vivo. The results revealed that boron containing scaffolds increased in vitro proliferation, attachment and calcium mineralization of rADSCs. In addition, boron containing scaffold application resulted in increased bone regeneration by enhancing osteocalcin, VEGF and collagen type I protein levels in a femur defect model. Bone mineralization density (BMD) and computed tomography (CT) analysis proved that boron incorporated scaffold administration increased the healing rate of bone defects. Transplanting stem cells into boron containing scaffolds was found to further improve bone-related outcomes compared to control groups. Additional studies are highly warranted for the investigation of the mechanical properties of these scaffolds in order to address their potential use in clinics. The study proposes that boron serves as a promising innovative approach in manufacturing scaffold systems for functional bone tissue engineering. - Highlights: • Boron containing PLGA scaffolds were developed for bone tissue engineering. • Boron incorporation increased cell viability and mineralization of stem cells. • Boron containing scaffolds increased bone-related protein expression in vivo. • Implantation of stem cells on boron containing scaffolds improved bone healing.

  6. Enhancement of albumin expression in bone tissues with healing rat fractures.

    Science.gov (United States)

    Yamaguchi, Masayoshi; Igarashi, Aki; Misawa, Hiroyuki; Tsurusaki, Yoshinori

    2003-05-15

    The characterization of 66 kDa protein molecule, a major protein component which is produced from femoral-diaphyseal tissues with fracture healing (Igarashi and Yamaguchi [2002] Int. J. Mol. Med. 9:503-508), was investigated. Weaning rats were killed at 7 and 14 days after femoral fracture. When the femoral-diaphyseal tissues with fracture healing were cultured for 48 h in a serum-free medium, many proteins in the bone tissues were released into the medium. Analysis with sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed that a protein molecule of approximately 66 kDa was markedly increased in culture medium from bone tissues with fracture healing. N-terminal sequencing of 66 kDa protein indicated that its N-terminus was identical to that of rat albumin. Western blot analysis of medium 66 kDa protein showed expression of albumin. This expression was significantly enhanced by fracture healing. The expression of albumin was seen in the diaphyseal (cortical bone) and metaphyseal (trabecular bone) tissues of rat femur. When the femoral-diaphyseal tissues obtained at 7 days after femoral fracture were cultured in a serum-free medium containing either vehicle, parathyroid hormone (1-34) (10(-7) M), insulin-like growth factor-I (10(-8) M) or zinc acexamate (10(-4) M), medium albumin was significantly increased in the presence of those bone-stimulating factors. The addition of albumin (0.5 or 1.0 mg/ml of medium) caused a significant increase in calcium and deoxyribonucleic acid contents in the femoral-diaphyseal and -metaphyseal tissues obtained from normal rats in vitro. The present study demonstrates that fracture healing induces a remarkable production of albumin which is a major protein component produced from femoral-diaphyseal tissues of rats, and that albumin has an anabolic effect on bone components.

  7. Mineralization of human bone tissue under hypokinesia and physical exercise with calcium supplements

    Science.gov (United States)

    Zorbas, Yan G.; Verentsov, Grigori E.; Abratov, Nikolai I.

    It has been suggested that physical exercise and calcium supplements may be used to prevent demineralization of bone tissue under hypokinesia (diminished muscular activity). Thus, the aim of this study was to determine mineral content of bones of 12 physically healthy men aged 19-24 years under 90 days of hypokinesia and intensive physical exercise (PE) with calcium lactate (C) supplements. They were divided into experimental and control groups with 6 men in each. The experimental group of men were subjected to hypokinesia (HK) and intensive PE and took 650 mg C 6 times per day; the control group was placed under pure HK, i.e. without the use of any preventive measures. The mineral content of different bone tissues was measured with a densitometric X-ray method in milligrams of calcium per 1 mm 3 before and after exposure to HK. The level of bone density of the examined bone tissues decreased by 7-9% and 5-7% for the control and experimental groups of men, respectively. A statistical analysis revealed that the reduction of bone mineralization was significant with P human organisms, since the entire animal kingdom had been formed in an environment of high motor activity which left its imprint on the evolution, structure, function and behaviour of animals and men. The impossibility of the body tissues to retain optimum amounts of fluid and electrolytes is the dominant hypokinetic effect.

  8. Osteoinductive peptide-functionalized nanofibers with highly ordered structure as biomimetic scaffolds for bone tissue engineering.

    Science.gov (United States)

    Gao, Xiang; Zhang, Xiaohong; Song, Jinlin; Xu, Xiao; Xu, Anxiu; Wang, Mengke; Xie, Bingwu; Huang, Enyi; Deng, Feng; Wei, Shicheng

    2015-01-01

    The construction of functional biomimetic scaffolds that recapitulate the topographical and biochemical features of bone tissue extracellular matrix is now of topical interest in bone tissue engineering. In this study, a novel surface-functionalized electrospun polycaprolactone (PCL) nanofiber scaffold with highly ordered structure was developed to simulate the critical features of native bone tissue via a single step of catechol chemistry. Specially, under slightly alkaline aqueous solution, polydopamine (pDA) was coated on the surface of aligned PCL nanofibers after electrospinning, followed by covalent immobilization of bone morphogenetic protein-7-derived peptides onto the pDA-coated nanofiber surface. Contact angle measurement, Raman spectroscopy, and X-ray photoelectron spectroscopy confirmed the presence of pDA and peptides on PCL nanofiber surface. Our results demonstrated that surface modification with osteoinductive peptides could improve cytocompatibility of nanofibers in terms of cell adhesion, spreading, and proliferation. Most importantly, Alizarin Red S staining, quantitative real-time polymerase chain reaction, immunostaining, and Western blot revealed that human mesenchymal stem cells cultured on aligned nanofibers with osteoinductive peptides exhibited enhanced osteogenic differentiation potential than cells on randomly oriented nanofibers. Furthermore, the aligned nanofibers with osteoinductive peptides could direct osteogenic differentiation of human mesenchymal stem cells even in the absence of osteoinducting factors, suggesting superior osteogenic efficacy of biomimetic design that combines the advantages of osteoinductive peptide signal and highly ordered nanofibers on cell fate decision. The presented peptide-decorated bone-mimic nanofiber scaffolds hold a promising potential in the context of bone tissue engineering.

  9. Low-intensity pulsed ultrasound prompts tissue-engineered bone formation after implantation surgery

    Institute of Scientific and Technical Information of China (English)

    Wang Juyong; Wang Juqiang; Asou Yoshinori; Paul Fu; Shen Huiliang; Chen Jiani; Sotome Shinichi

    2014-01-01

    Background A practical problem impeding clinical translation is the limited bone formation seen in artificial bone grafts.Low-pressure/vacuum seeding and dynamic culturing in bioreactors have led to a greater penetration into the scaffolds,enhanced production of bone marrow cells,and improved tissue-engineered bone formation.The goal of this study was to promote more extensive bone formation in the composites of porous ceramics and bone marrow stromal cells (BMSCs).Methods BMSCs/β-tricalcium phosphate (β-TCP) composites were subcultured for 2 weeks and then subcutaneously implanted into syngeneic rats that were split into a low-intensity pulsed ultrasound (LIPUS) treatment group and a control group.These implants were harvested at 5,10,25,and 50 days after implantation.The samples were then biomechanically tested and analyzed for alkaline phosphate (ALP) activity and osteocalcin (OCN) content and were also observed by light microscopy.Results The levels of ALP activity and OCN content in the composites were significantly higher in the LIPUS group than in the control group.Histomorphometric analysis revealed a greater degree of soft tissue repair,increased blood flow,better angiogenesis,and more extensive bone formation in the LIPUS groups than in the controls.No significant difference in the compressive strength was found between the two groups.Conclusion LIPUS treatment appears to enhance bone formation and angiogenesis in the BMSCs/β3-TCP composites.

  10. Methods for demonstration of enzyme activity in muscle fibres at the muscle/bone interface in demineralized tissue

    DEFF Research Database (Denmark)

    Kirkeby, S; Vilmann, H

    1981-01-01

    A method for demonstration of activity for ATPase and various oxidative enzymes (succinic dehydrogenase, alpha-glycerophosphate dehydrogenase, and lactic dehydrogenase) in muscle/bone sections of fixed and demineralized tissue has been developed. It was found that it is possible to preserve...... with the aid of a mapping of presence of phosphomonoesterases on bone surfaces, the method may be used to study possible biochemical interactions between bone and muscle tissue at the muscle/bone interface....

  11. Biphasic calcium phosphate–casein bone graft fortified with Cassia occidentalis for bone tissue engineering and regeneration

    Indian Academy of Sciences (India)

    B Santhosh Kumar; T Hemalatha; R Deepachitra; R Narasimha Raghavan; P Prabu; T P Sastry

    2015-02-01

    Research on traditional herbs is gaining momentum owing to their potent medical properties, among which Cassia occidentalis (CO) is a promising herb, with osteogenic potential. The study investigates the efficacy of CO extract incorporated biphasic calcium phosphate as an osteoinductive material. Prepared bone implants were characterized physico-chemically using FT-IR, TGA, XRD, SEM and EDX. The implants were analysed further for mechanical and biological properties. The results revealed that CO extract-incorporated bone implants possessed better compression strength and it was able to induce proliferation and enhance alkaline phosphatase activity in SaOS-2 cells. The implant proves to be promising for bone tissue engineering, and hence it demands further in vivo evaluation.

  12. Fibroblast Growth Factor 23: a Bridge Between Bone Minerals and Renal Volume Handling

    NARCIS (Netherlands)

    Humalda, Jelmer Kor

    2016-01-01

    The work in this thesis addresses the interaction between the phosphate-regulating hormone Fibroblast Growth Factor 23 (FGF-23) as key player in bone-mineral homeostasis and renal volume handling, mainly in the context of the renin-angiotensin-aldosterone system (RAAS). First, we elaborate on the ro

  13. Monte Carlo modeling of photon transport in buried bone tissue layer for quantitative Raman spectroscopy

    Science.gov (United States)

    Wilson, Robert H.; Dooley, Kathryn A.; Morris, Michael D.; Mycek, Mary-Ann

    2009-02-01

    Light-scattering spectroscopy has the potential to provide information about bone composition via a fiber-optic probe placed on the skin. In order to design efficient probes, one must understand the effect of all tissue layers on photon transport. To quantitatively understand the effect of overlying tissue layers on the detected bone Raman signal, a layered Monte Carlo model was modified for Raman scattering. The model incorporated the absorption and scattering properties of three overlying tissue layers (dermis, subdermis, muscle), as well as the underlying bone tissue. The attenuation of the collected bone Raman signal, predominantly due to elastic light scattering in the overlying tissue layers, affected the carbonate/phosphate (C/P) ratio by increasing the standard deviation of the computational result. Furthermore, the mean C/P ratio varied when the relative thicknesses of the layers were varied and the elastic scattering coefficient at the Raman scattering wavelength of carbonate was modeled to be different from that at the Raman scattering wavelength of phosphate. These results represent the first portion of a computational study designed to predict optimal probe geometry and help to analyze detected signal for Raman scattering experiments involving bone.

  14. Network-Based Method for Identifying Co- Regeneration Genes in Bone, Dentin, Nerve and Vessel Tissues.

    Science.gov (United States)

    Chen, Lei; Pan, Hongying; Zhang, Yu-Hang; Feng, Kaiyan; Kong, XiangYin; Huang, Tao; Cai, Yu-Dong

    2017-10-02

    Bone and dental diseases are serious public health problems. Most current clinical treatments for these diseases can produce side effects. Regeneration is a promising therapy for bone and dental diseases, yielding natural tissue recovery with few side effects. Because soft tissues inside the bone and dentin are densely populated with nerves and vessels, the study of bone and dentin regeneration should also consider the co-regeneration of nerves and vessels. In this study, a network-based method to identify co-regeneration genes for bone, dentin, nerve and vessel was constructed based on an extensive network of protein-protein interactions. Three procedures were applied in the network-based method. The first procedure, searching, sought the shortest paths connecting regeneration genes of one tissue type with regeneration genes of other tissues, thereby extracting possible co-regeneration genes. The second procedure, testing, employed a permutation test to evaluate whether possible genes were false discoveries; these genes were excluded by the testing procedure. The last procedure, screening, employed two rules, the betweenness ratio rule and interaction score rule, to select the most essential genes. A total of seventeen genes were inferred by the method, which were deemed to contribute to co-regeneration of at least two tissues. All these seventeen genes were extensively discussed to validate the utility of the method.

  15. Optical detection of carotenoid antioxidants in human bone and surrounding tissue.

    Science.gov (United States)

    Ermakov, Igor V; Ermakova, Maia R; Rosenberg, Thomas D; Gellermann, Werner

    2013-11-01

    Carotenoids are known to play an important role in health and disease state of living human tissue based on their antioxidant and optical filtering functions. In this study, we show that carotenoids exist in human bone and surrounding fatty tissue both in significant and individually variable concentrations. Measurements of biopsied tissue samples with molecule-specific Raman spectroscopy and high-performance liquid chromatography reveal that all carotenoids that are known to exist in human skin are also present in human bone. This includes all carotenes, lycopene, β-cryptoxanthin, lutein, and zeaxanthin. We propose quantitative reflection imaging as a noncontact optical method suitable for the measurement of composite carotenoid levels in bone and surrounding tissue exposed during open surgeries such as total knee arthroplasty, and as a proof of concept, demonstrate carotenoid measurements in biopsied bone samples. This will allow one to establish potential correlations between internal tissue carotenoid levels and levels in skin and to potentially use already existing optical skin carotenoid tests as surrogate marker for bone carotenoid status.

  16. Use of osmium tetroxide staining with microcomputerized tomography to visualize and quantify bone marrow adipose tissue in vivo.

    Science.gov (United States)

    Scheller, Erica L; Troiano, Nancy; Vanhoutan, Joshua N; Bouxsein, Mary A; Fretz, Jackie A; Xi, Yougen; Nelson, Tracy; Katz, Griffin; Berry, Ryan; Church, Christopher D; Doucette, Casey R; Rodeheffer, Matthew S; Macdougald, Ormond A; Rosen, Clifford J; Horowitz, Mark C

    2014-01-01

    Adipocytes reside in discrete, well-defined depots throughout the body. In addition to mature adipocytes, white adipose tissue depots are composed of many cell types, including macrophages, endothelial cells, fibroblasts, and stromal cells, which together are referred to as the stromal vascular fraction (SVF). The SVF also contains adipocyte progenitors that give rise to mature adipocytes in those depots. Marrow adipose tissue (MAT) or marrow fat has long been known to be present in bone marrow (BM) but its origin, development, and function remain largely unknown. Clinically, increased MAT is associated with age, metabolic diseases, drug treatment, and marrow recovery in children receiving radiation and chemotherapy. In contrast to the other depots, MAT is unevenly distributed in the BM of long bones. Conventional quantitation relies on sectioning of the bone to overcome issues with distribution but is time-consuming, resource intensive, inconsistent between laboratories and may be unreliable as it may miss changes in MAT volume. Thus, the inability to quantitate MAT in a rapid, systematic, and reproducible manner has hampered a full understanding of its development and function. In this chapter, we describe a new technique that couples histochemical staining of lipid using osmium tetroxide with microcomputerized tomography to visualize and quantitate MAT within the medullary canal in three dimensions. Imaging of osmium staining provides a high-resolution map of existing and developing MAT in the BM. Because this method is simple, reproducible, and quantitative, we expect it will become a useful tool for the precise characterization of MAT.

  17. Ready to Use Tissue Construct for Military Bone & Cartilage Trauma

    Science.gov (United States)

    2014-10-01

    supplied cell- permeable green fluorescent dye (Ex/Em = 488/518 nm) and propidium iodide (PI), a cell non- permeable red fluorescent dye (Ex/Em = 488/615...fixation is commonly used for forearm bone fractures. For femur and tibia, intramedullary nailing is a common choice of internal fixation. For the...humerus, both plate and screws and intramedullary nailing are used. However, for skeletal defects following resection of malignant tumors, intramedullary

  18. Determination of the relationship between collagen cross-links and the bone-tissue stiffness in the porcine mandibular condyle.

    Science.gov (United States)

    Willems, Nop M B K; Mulder, Lars; Bank, Ruud A; Grünheid, Thorsten; den Toonder, Jaap M J; Zentner, Andrej; Langenbach, Geerling E J

    2011-04-07

    Although bone-tissue stiffness is closely related to the degree to which bone has been mineralized, other determinants are yet to be identified. We, therefore, examined the extent to which the mineralization degree, collagen, and its cross-links are related to bone-tissue stiffness. A total of 50 cancellous and cortical bone samples were derived from the right mandibular condyles of five young and five adult female pigs. The degree of mineralization of bone (DMB) was assessed using micro-computed tomography. Using high-performance liquid chromatography, we quantified the collagen content and the number of cross-links per collagen molecule of two enzymatic cross-links: hydroxylysylpyridinoline (HP) and lysylpyridinoline (LP), and one non-enzymatic cross-link: pentosidine (Pen). Nanoindentation was used to assess bone-tissue stiffness in three directions, and multiple linear regressions were used to calculate the correlation between collagen properties and bone-tissue stiffness, with the DMB as first predictor. Whereas the bone-tissue stiffness of cancellous bone did not differ between the three directions of nanoindentation, or between the two age groups, cortical bone-tissue stiffness was higher in the adult tissue. After correction for DMB, the cross-links studied did not increase the explained variance. In the young group, however, LP significantly improved the explained variance in bone-tissue stiffness. Approximately half of the variation in bone-tissue stiffness in cancellous and cortical bone was explained by the DMB and the LP cross-links and thus they cannot be considered the sole determinants of the bone-tissue stiffness.

  19. Degradability of injectable calcium sulfate/mineralized collagen-based bone repair material and its effect on bone tissue regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Zonggang, E-mail: chenzg@sdu.edu.cn [National Glycoengineering Research Center, Shandong University, Jinan 250100 (China); Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Kang, Lingzhi [National Glycoengineering Research Center, Shandong University, Jinan 250100 (China); Meng, Qing-Yuan [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Liu, Huanye [Department of Prosthodontics, School of Stomatology, China Medical University, Shenyang 110001 (China); Wang, Zhaoliang [Jinan Military General Hospital of PLA, Jinan 250031 (China); Guo, Zhongwu, E-mail: zwguo@sdu.edu.cn [National Glycoengineering Research Center, Shandong University, Jinan 250100 (China); Cui, Fu-Zhai, E-mail: cuifz@mail.tsinghua.edu.cn [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China)

    2014-12-01

    The nHAC/CSH composite is an injectable bone repair material with controllable injectability and self-setting properties prepared by introducing calcium sulfate hemihydrate (CSH) into mineralized collagen (nHAC). When mixed with water, the nHAC/CSH composites can be transformed into mineralized collagen/calcium sulfate dihydrate (nHAC/CSD) composites. The nHAC/CSD composites have good biocompatibility and osteogenic capability. Considering that the degradation behavior of bone repair material is another important factor for its clinical applications, the degradability of nHAC/CSD composites was studied. The results showed that the degradation ratio of the nHAC/CSD composites with lower nHAC content increased with the L/S ratio increase of injectable materials, but the variety of L/S ratio had no significant effect on the degradation ratio of the nHAC/CSD composites with higher nHAC content. Increasing nHAC content in the composites could slow down the degradation of nHAC/CSD composite. Setting accelerator had no significant effect on the degradability of nHAC/CSD composites. In vivo histological analysis suggests that the degradation rate of materials can match the growth rate of new mandibular bone tissues in the implanted site of rabbit. The regulable degradability of materials resulting from the special prescriptions of injectable nHAC/CSH composites will further improve the workability of nHAC/CSD composites. - Highlights: • The nHAC/CSH composite can be as an injectable bone repair material. • The L/S ratio and nHAC content have a significant effect on material degradability. • The degradability of bone materials can be regulated to match tissue repair. • The regulable degradability will further improve the workability of bone materials.

  20. Correlation Between Bone and Soft Tissue Thickness in Maxillary Anterior Teeth

    Directory of Open Access Journals (Sweden)

    Nasrin Esfahanizadeh

    2016-12-01

    Full Text Available Objectives: The purpose of this study was to determine buccal bone and soft tissue thicknesses and their correlation in the maxillary anterior region using cone beam computed tomography (CBCT.Materials and Methods: In this cross sectional study, 330 sound maxillary incisors in 60 patients with a mean age of 37.5 years were assessed by CBCT scans. For better visualization of soft tissue, patients were asked to use plastic retractors in order to retract their lips and cheeks away from the gingival tissue before taking the scans. Measurements were made in three different positions: at the crest and at 2 and 5mm apical to the crest. The cementoenamel junction‒crest distance was measured. for data analyses, the Pearson’s correlation coefficient, ANOVA and intraclass correlation coefficient were used.Results: There were mildly significant linear associations between labial soft tissue and bone thickness in the canines and incisors (r<0.40, P<0.05, but no association was found for the lateral incisors. The mean thickness of buccal bone differed significantly in the maxillary anterior teeth, being greater for the lateral incisors (P<0.05. For soft tissue thickness, the results were the same, and the least thickness was recorded for the canines. There was a mild association between labial soft tissue and bone thickness in canines and incisors (r=0.2, P=0.3, but no such linear association was seen for the lateral incisors.Conclusions: The mean thickness of buccal bone and soft tissue in the anterior maxilla was <1mm and there was a mild linear correlation between them.Keywords: Facial Bones; Cone-Beam Computed Tomography; Maxilla; Esthetics, Dental

  1. Accuracy of cancellous bone volume fraction measured by micro-CT scanning

    DEFF Research Database (Denmark)

    Ding, Ming; Odgaard, A; Hvid, I

    1999-01-01

    Volume fraction, the single most important parameter in describing trabecular microstructure, can easily be calculated from three-dimensional reconstructions of micro-CT images. This study sought to quantify the accuracy of this measurement. One hundred and sixty human cancellous bone specimens...... which covered a large range of volume fraction (9.8-39.8%) were produced. The specimens were micro-CT scanned, and the volume fraction based on Archimedes' principle was determined as a reference. After scanning, all micro-CT data were segmented using individual thresholds determined by the scanner...

  2. Central and peripheral mechanisms of the NPY system in the regulation of bone and adipose tissue.

    Science.gov (United States)

    Shi, Yan-Chuan; Baldock, Paul A

    2012-02-01

    Skeletal research is currently undergoing a period of marked expansion. The boundaries of "bone" research are being re-evaluated and with this, a growing recognition of a more complex and interconnected biology than previously considered. One aspect that has become the focus of particular attention is the relationship between bone and fat homeostasis. Evidence from a number of avenues indicates that bone and adipose regulation are both related and interdependent. This review examines the neuropeptide Y (NPY) system, known to exert powerful control over both bone and fat tissue. The actions of this system are characterized by signaling both within specific nuclei of the hypothalamus and also the target tissues, mediated predominantly through two G-protein coupled receptors (Y1 and Y2). In bone tissue, elevated NPY levels act consistently to repress osteoblast activity. Moreover, both central Y2 receptor and osteoblastic Y1 receptor signaling act similarly to repress bone formation. Conversely, loss of NPY expression or receptor signaling induces increased osteoblast activity and bone mass in both cortical and cancellous envelopes. In fat tissue, NPY action is more complex. Energy homeostasis is powerfully altered by elevations in hypothalamic NPY, resulting in increases in fat accretion and body-wide energy conservation, through the action of locally expressed Y1 receptors, while local Y2 receptors act to inhibit NPY-ergic tone. Loss of central NPY expression has a markedly reduced effect, consistent with a physiological drive to promote fat accretion. In fat tissue, NPY and Y1 receptors act to promote lipogenesis, consistent with their roles in the brain. Y2 receptors expressed in adipocytes also act in this manner, showing an opposing action to their role in the hypothalamus. While direct investigation of these processes has yet to be completed, these responses appear to be interrelated to some degree. The starvation-based signal of elevated central NPY inducing

  3. Effect of Chenopodium ambrosioides on the healing process of the in vivo bone tissue.

    Science.gov (United States)

    Penha, Elizandra Silva da; Lacerda-Santos, Rogério; Carvalho, Maria Goretti Freire de; Oliveira, Patrícia Teixeira de

    2017-07-25

    The focus of this double-blind randomized study was on evaluating the effect of an aqueous extract of Mastruz (Chenopodium ambrosioides L.) on the bone repair process in vivo. In total, 36 male Wistar rats were randomly selected for this study, and divided into 3 groups (n = 12): Group HS (Hemostatic Sponge), Group SM (Hemostatic Sponge with Mastruz) and Group BC (Blood Clot). In each animal, bone defects measuring 2 mm in diameter were performed in both tibias for placement of the substances. After 3 and 10 days, the animals were sacrificed, and the tissues were analyzed under an optical microscope relative to the following events: inflammatory infiltrate; necrosis; young fibroblasts; osteoclastic and osteoblastic activity; endosteal and periosteal bone formation; and bone repair. The results were assessed by using Kruskal-Wallis and Mann-Whitney tests (p < .05). Inflammatory infiltrate demonstrated difference between Groups SM and BC in the time interval of 3 days (p = .004); an event related to the presence of the fibrin sponge and liquid of the extract, which induced a foreign body initial reaction. The presence of young fibroblasts (p = .003), osteoclastic (p = .003), and osteoblastic (p = .020) activity was statistically significant between Groups HS and BC in the time interval of 10 days; performance was related to the presence of the sponge within bone. As regards injured bone tissue repair, Group SM demonstrated a higher level of regenerative capacity (p = 0.004), due to a larger quantities of endosteal and periosteal bone formation, demonstrated in Group SM. The aqueous extract of mastruz stimulated bone neoformation, presenting wound closure with bone tissue at the end of 10 days. © 2017 Wiley Periodicals, Inc.

  4. Adaptive growth factor delivery from a polyelectrolyte coating promotes synergistic bone tissue repair and reconstruction.

    Science.gov (United States)

    Shah, Nisarg J; Hyder, Md Nasim; Quadir, Mohiuddin A; Dorval Courchesne, Noémie-Manuelle; Seeherman, Howard J; Nevins, Myron; Spector, Myron; Hammond, Paula T

    2014-09-01

    Traumatic wounds and congenital defects that require large-scale bone tissue repair have few successful clinical therapies, particularly for craniomaxillofacial defects. Although bioactive materials have demonstrated alternative approaches to tissue repair, an optimized materials system for reproducible, safe, and targeted repair remains elusive. We hypothesized that controlled, rapid bone formation in large, critical-size defects could be induced by simultaneously delivering multiple biological growth factors to the site of the wound. Here, we report an approach for bone repair using a polyelectrolye multilayer coating carrying as little as 200 ng of bone morphogenetic protein-2 and platelet-derived growth factor-BB that were eluted over readily adapted time scales to induce rapid bone repair. Based on electrostatic interactions between the polymer multilayers and growth factors alone, we sustained mitogenic and osteogenic signals with these growth factors in an easily tunable and controlled manner to direct endogenous cell function. To prove the role of this adaptive release system, we applied the polyelectrolyte coating on a well-studied biodegradable poly(lactic-co-glycolic acid) support membrane. The released growth factors directed cellular processes to induce bone repair in a critical-size rat calvaria model. The released growth factors promoted local bone formation that bridged a critical-size defect in the calvaria as early as 2 wk after implantation. Mature, mechanically competent bone regenerated the native calvaria form. Such an approach could be clinically useful and has significant benefits as a synthetic, off-the-shelf, cell-free option for bone tissue repair and restoration.

  5. Technique for bone volume measurement from human femur head samples by classification of micro-CT image histograms

    Directory of Open Access Journals (Sweden)

    Franco Marinozzi

    2013-09-01

    Full Text Available INTRODUCTION: Micro-CT analysis is a powerful technique for a non-invasive evaluation of the morphometric parameters of trabecular bone samples. This elaboration requires a previous binarization of the images. A problem which arises from the binarization process is the partial volume artifact. Voxels at the external surface of the sample can contain both bone and air so thresholding operates an incorrect estimation of volume occupied by the two materials. AIM: The aim of this study is the extraction of bone volumetric information directly from the image histograms, by fitting them with a suitable set of functions. METHODS: Nineteen trabecular bone samples were extracted from femoral heads of eight patients subject to a hip arthroplasty surgery. Trabecular bone samples were acquired using micro-CT Scanner. Hystograms of the acquired images were computed and fitted by Gaussian-like functions accounting for: a gray levels produced by the bone x-ray absorption, b the portions of the image occupied by air and c voxels that contain a mixture of bone and air. This latter contribution can be considered such as an estimation of the partial volume effect. RESULTS: The comparison of the proposed technique to the bone volumes measured by a reference instrument such as by a helium pycnometer show the method as a good way for an accurate bone volume calculation of trabecular bone samples.

  6. Augmentation of the rat jaw with autogeneic cortico-cancellous bone grafts and guided tissue regeneration.

    Science.gov (United States)

    Donos, Nikolaos; Kostopoulos, Lambros; Karring, Thorkild

    2002-04-01

    The aim of the present study was to evaluate the effect of augmenting the maxillary alveolar ridge and the lateral aspect of the mandible with onlay autogeneic cortico-cancellous bone grafts that were covered with e-PTFE membranes. The experiment was carried out in 51 rats. In 15 rats, the edentulous maxillary jaw between the incisor and the first molar was augmented by means of an autogeneic ischiac bone graft that was fixed with a gold-coated microimplant. In one side, the graft was covered with an e-PTFE membrane, while the other side, which served as control, was treated without a membrane. In the other 36 rats, the lateral aspect of the mandible was augmented in both sides by means of an autogeneic ischiac bone graft that was fixed with a gold-coated or a titanium microimplant. In one side, the augmented area was covered with an e-PTFE membrane, while the contralateral side was treated without a membrane. Histological analysis at 60, 120 and 180 days after augmentation of the maxilla showed that, in the case of the test sites (where most of the membranes were either exposed or lost), the bone grafts presented extensive resorption and there was a lack of bone continuity between the graft and the recipient site. Similar findings were made at the non-membrane-treated control sides. In the case of augmentation of the mandible with membranes, the bone grafts were not resorbed, but were integrated into newly formed bone at the recipient site. In the control sides, the grafts presented varying degrees of resorption and integration into the recipient bone. It is concluded that, in comparison to bone grafting alone, onlay ischiac bone grafting combined with guided tissue regeneration eliminates the risk of bone graft resorption and ensures integration of the graft into newly formed bone at the recipient site, provided that closure of the operated area can be maintained during healing.

  7. Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review

    Directory of Open Access Journals (Sweden)

    Xiang-Yu Zhang

    2017-01-01

    Full Text Available Additive manufacturing (AM, nowadays commonly known as 3D printing, is a revolutionary materials processing technology, particularly suitable for the production of low-volume parts with high shape complexities and often with multiple functions. As such, it holds great promise for the fabrication of patient-specific implants. In recent years, remarkable progress has been made in implementing AM in the bio-fabrication field. This paper presents an overview on the state-of-the-art AM technology for bone tissue engineering (BTE scaffolds, with a particular focus on the AM scaffolds made of metallic biomaterials. It starts with a brief description of architecture design strategies to meet the biological and mechanical property requirements of scaffolds. Then, it summarizes the working principles, advantages and limitations of each of AM methods suitable for creating porous structures and manufacturing scaffolds from powdered materials. It elaborates on the finite-element (FE analysis applied to predict the mechanical behavior of AM scaffolds, as well as the effect of the architectural design of porous structure on its mechanical properties. The review ends up with the authors’ view on the current challenges and further research directions.

  8. Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review

    Science.gov (United States)

    Zhang, Xiang-Yu; Fang, Gang; Zhou, Jie

    2017-01-01

    Additive manufacturing (AM), nowadays commonly known as 3D printing, is a revolutionary materials processing technology, particularly suitable for the production of low-volume parts with high shape complexities and often with multiple functions. As such, it holds great promise for the fabrication of patient-specific implants. In recent years, remarkable progress has been made in implementing AM in the bio-fabrication field. This paper presents an overview on the state-of-the-art AM technology for bone tissue engineering (BTE) scaffolds, with a particular focus on the AM scaffolds made of metallic biomaterials. It starts with a brief description of architecture design strategies to meet the biological and mechanical property requirements of scaffolds. Then, it summarizes the working principles, advantages and limitations of each of AM methods suitable for creating porous structures and manufacturing scaffolds from powdered materials. It elaborates on the finite-element (FE) analysis applied to predict the mechanical behavior of AM scaffolds, as well as the effect of the architectural design of porous structure on its mechanical properties. The review ends up with the authors’ view on the current challenges and further research directions. PMID:28772411

  9. Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review.

    Science.gov (United States)

    Zhang, Xiang-Yu; Fang, Gang; Zhou, Jie

    2017-01-10

    Additive manufacturing (AM), nowadays commonly known as 3D printing, is a revolutionary materials processing technology, particularly suitable for the production of low-volume parts with high shape complexities and often with multiple functions. As such, it holds great promise for the fabrication of patient-specific implants. In recent years, remarkable progress has been made in implementing AM in the bio-fabrication field. This paper presents an overview on the state-of-the-art AM technology for bone tissue engineering (BTE) scaffolds, with a particular focus on the AM scaffolds made of metallic biomaterials. It starts with a brief description of architecture design strategies to meet the biological and mechanical property requirements of scaffolds. Then, it summarizes the working principles, advantages and limitations of each of AM methods suitable for creating porous structures and manufacturing scaffolds from powdered materials. It elaborates on the finite-element (FE) analysis applied to predict the mechanical behavior of AM scaffolds, as well as the effect of the architectural design of porous structure on its mechanical properties. The review ends up with the authors' view on the current challenges and further research directions.

  10. Fabrication of nanocrystalline hydroxyapatite doped degradable composite hollow fiber for guided and biomimetic bone tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Ning [Department of Bioengineering, Clemson University, Clemson, SC, 29634 (United States); Nichols, Heather L. [Department of Bioengineering, Clemson University, Clemson, SC, 29634 (United States); Tylor, Shila [Department of Bioengineering, Clemson University, Clemson, SC, 29634 (United States); Wen Xuejun [Department of Bioengineering, Clemson University, Clemson, SC, 29634 (United States)]. E-mail: xjwen@clemson.edu

    2007-04-15

    Natural bone tissue possesses a nanocomposite structure interwoven in a three-dimensional (3-D) matrix, which plays critical roles in conferring appropriate physical and biological properties to the bone tissue. Single type of material may not be sufficient to mimic the composition, structure and properties of native bone, therefore, composite materials consisting of both polymers, bioceramics, and other inorganic materials have to be designed. Among a variety of candidate materials, polymer-nanoparticle composites appear most promising for bone tissue engineering applications because of superior mechanical properties, improved durability, and surface bioactivity when compared with conventional polymers or composites. The long term objective of this project is to use highly aligned, bioactive, biodegradable scaffold mimicking natural histological structure of human long bone, and to engineer and regenerate human long bone both in vitro and in vivo. In this study, bioactive, degradable, and highly permeable composite hollow fiber membranes (HFMs) were fabricated using a wet phase phase-inversion approach. The structure of the hollow fiber membranes was examined using scanning electron microscopy (SEM); degradation behavior was examined using weigh loss assay, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC); and bioactivity was evaluated with the amount of calcium deposition from the culture media onto HFM surface. Doping PLGA HFMs with nanoHA results in a more bioactive and slower degrading HFM than pure PLGA HFMs.

  11. Experimental and numerical analysis of Izod impact test of cortical bone tissue

    Science.gov (United States)

    Abdel-Wahab, A. A.; Silberschmidt, V. V.

    2012-05-01

    Bones can only sustain loads until a certain limit, beyond which they fail. Usually, the reasons for bone fracture are traumatic falls, sports injuries, and engagement in transport or industrial accidents. A proper treatment of bones and prevention of their fracture can be supported by in-depth understanding of deformation and fracture behavior of this tissue in such dynamic events. In this paper, a combination of experimental and numerical analysis was carried out in order to comprehend the fracture behavior of cortical bone tissue. Experimental tests were performed to study the transient dynamic behavior of cortical bone tissue under impact bending loading. The variability of absorbed energy for different cortex positions and notch depths was studied using Izod impact tests. Also, Extended Finite-Element Method implemented into the commercial finite-element software Abaqus was used to simulate the crack initiation and growth processes in a cantilever beam of cortical bone exposed to impact loading using the Izod loading scheme. The simulation results show a good agreement with the experimental data.

  12. How do jet time, pressure and bone volume fraction influence the drilling depth when waterjet drilling in porcine bone?

    Science.gov (United States)

    den Dunnen, Steven; Dankelman, Jenny; Kerkhoffs, Gino M M J; Tuijthof, Gabrielle J M

    2016-09-01

    Using water jets for orthopedic procedures that require bone drilling can be beneficial due to the absence of thermal damage and the always sharp cut. Previously, the influence of the water jet diameter and bone architectural properties on the drilling depth have been determined. To develop water jet instruments that can safely drill in orthopedic surgery, the impact of the two remaining primary factors were determined: the jet time (tjet [s]) and pressure (P [MPa]). To this end, 84 holes were drilled in porcine tali and femora with water jets using Ø 0.4mm nozzle. tjet was varied between 1, 3 and 5s and P between 50 and 70MPa. Drilling depths Lhole (mm), diameters Dhole (mm) and the volume of mineralized bone per unit volume (BV/TV) were determined with microCT scans. A non-linear regression analysis resulted in the predictive equation: Lhole= 0.22 * tjet(0.18) * (1.2-BV/TV) * (P-29) (R(2)=0.904). The established relation between the machine settings and drilling depth allows surgeons to adjust jet time and pressure for the patient׳s BV/TV to drill holes at a predetermined depth. For developers, the relation allows design decisions to be made that influence the dimensions, flexibility and accuracy of water jet instruments. For a pressure of 50MPa, the potential hole depth spread indicated by the 95% confidence interval is drilling can be applied in orthopedic surgery to drill holes in bone with controlled depth.

  13. Profiling Osteogenic microRNAs For RNAi-Functionalization Of Scaffolds In Bone Tissue Engineering

    DEFF Research Database (Denmark)

    Chang, Chi-Chih (Clare); Chen, Li; Venø, Morten Trillingsgaard

    is limited and grafts are required to assist in bone repair. The use of allografts can cause immunological complications, whilst autografts subject the patient to two surgeries. Bone tissue engineering is a multidisciplinary field encompassing material science, medicine, chemistry and molecular biology aimed...... both miRNAs that have been reported previously and many novel miRNAs with potent osteogenic capabilities. For tissue engineering applications, we then functionalized scaffolds with the miRNAs we identified and observed an increase in osteogenic capabilities in our 3D cultures. Our findings depicted...... the miRNA expression landscape as mesenchymal stem cells underwent osteogenic differentiation. We also highlight the potency of miRNAs as biological therapeutics in bone tissue engineering....

  14. Mathematical model for osteobstruction in bone regeneration mechanisms: a headway in skeletal tissue engineering.

    Science.gov (United States)

    Ogunsalu, C; Arunaye, F I; Ezeokoli, C; Gardner, M; Rohrer, M; Prasad, H

    2012-11-01

    In this paper, we formulate a mathematical model for the evaluation of parameters responsible for the retardation and eventual acceleration of bone regeneration on the contralateral side of the mandible of experimental animals, following the discovery of a new mechanism of bone regeneration called the osteobstruction mechanism (a negative mechanism of bone regeneration as opposed to the well established and extensively documented positive mechanisms such as osteogenesis, osteoinduction and osteoconduction). This osteobstructive mechanism was demonstrated by episodes of overtaking and reovertaking on single photon emission computed tomography (SPECT) following evaluation of osteoblastic activities in a sequential animal experiment to validate both the Ogunsalu sandwich technique (a double guided tissue technique; D-GTR) and the interceed membrane technique (a single guided tissue regeneration technique; S-GTR) utilizing SPECT, histological and histomorphometric evaluation. This work is now given special attention in terms of mathematical analysis because of limited experimental observations since experiments cannot be observed infinitely. Mathematical modelling is as such essential to generalize the results of this osteobstructive mechanism in bone regeneration. We utilize the Fisher's equation to describe bone cell mobilization during bone regeneration by two different techniques: the Ogunsalu sandwich bone regeneration technique (D-GTR) and the S-GTR.

  15. Boron containing poly-(lactide-co-glycolide) (PLGA) scaffolds for bone tissue engineering.

    Science.gov (United States)

    Doğan, Ayşegül; Demirci, Selami; Bayir, Yasin; Halici, Zekai; Karakus, Emre; Aydin, Ali; Cadirci, Elif; Albayrak, Abdulmecit; Demirci, Elif; Karaman, Adem; Ayan, Arif Kursat; Gundogdu, Cemal; Sahin, Fikrettin

    2014-11-01

    Scaffold-based bone defect reconstructions still face many challenges due to their inadequate osteoinductive and osteoconductive properties. Various biocompatible and biodegradable scaffolds, combined with proper cell type and biochemical signal molecules, have attracted significant interest in hard tissue engineering approaches. In the present study, we have evaluated the effects of boron incorporation into poly-(lactide-co-glycolide-acid) (PLGA) scaffolds, with or without rat adipose-derived stem cells (rADSCs), on bone healing in vitro and in vivo. The results revealed that boron containing scaffolds increased in vitro proliferation, attachment and calcium mineralization of rADSCs. In addition, boron containing scaffold application resulted in increased bone regeneration by enhancing osteocalcin, VEGF and collagen type I protein levels in a femur defect model. Bone mineralization density (BMD) and computed tomography (CT) analysis proved that boron incorporated scaffold administration increased the healing rate of bone defects. Transplanting stem cells into boron containing scaffolds was found to further improve bone-related outcomes compared to control groups. Additional studies are highly warranted for the investigation of the mechanical properties of these scaffolds in order to address their potential use in clinics. The study proposes that boron serves as a promising innovative approach in manufacturing scaffold systems for functional bone tissue engineering.

  16. Substituted Borosilicate Glasses with Improved Osteogenic Capacity for Bone Tissue Engineering.

    Science.gov (United States)

    Fernandes, João S; Gentile, Piergiorgio; Crawford, Aileen; Pires, Ricardo A; Hatton, Paul V; Reis, Rui L

    2017-03-27

    Borosilicate bioactive glasses (BBGs) have shown the capacity to promote higher formation of new bone when compared with silicate bioactive glasses. Herein, we assessed the capacity of BBGs to induce osteogenic differentiation of bone marrow mesenchymal stem cells (BM-MSCs) as a function of their substituted divalent cations (Mg(2+), Ca(2+), Sr(2+)). To this purpose, we synthesized BBG particles by melt quenching. The cell viability, proliferation, and morphology (i.e., PrestoBlue(®), PicoGreen(®), and DAPI and Phalloidin stainings, respectively), as well as protein expression (i.e., alkaline phosphatase, ALP; osteopontin, OP; and osteocalcin, OC), of BM-MSCs in contact with BBGs were evaluated for 21 days. We observed an enhanced expression of bone-specific proteins (ALP, OP, and OC) and high mineralization of BM-MSCs under BBG-Mg and BBG-Sr-conditioned osteogenic media for concentrations of 20 and 50 mg/mL with low cytotoxic effects. Moreover, BBG-Sr, at a concentration of 50 mg/mL, was able to increase the mineralization and expression of the same bone-specific proteins even under basal medium conditions. These results indicated that the proposed BBGs improved osteogenic differentiation of BM-MSCs, therefore showing their potential as relevant biomaterials for bone tissue regeneration, not only by bonding to bone tissue but also by stimulating new bone formation.

  17. Systemic drug delivery systems for bone tissue regeneration- a mini review.

    Science.gov (United States)

    Xinluan, Wang; Yuxiao, Lai; Helena, Ng HueiLeng; Zhijun, Yang; Ling, Qin

    2015-01-01

    Musculoskeletal metabolic diseases such as osteoporosis have become the major public health problems worldwide in our aging society. Pharmaceutical therapy is one of the approaches to prevent and treat related medical conditions. Most of the clinically used anti-osteoporotic drugs are administered systemically and have demonstrated some side effects in non-skeletal tissues. One of the innovative approaches to prevent potential adverse effects is the development of bone-targeting drug delivery technologies that not only minimizes the systemic toxicity but also improves the pharmacokinetic profile and therapeutic efficacy of chemical drugs. This paper reviews the currently available bone targeting drug delivery systems with emphasis as bone-targeting moieties, including the bonesurface- site-specific (bone formation dominant or bone resorption dominant) and cell-specific moieties. In addition, the connections of drug-bone-targeting moieties-carrier are also summarized, and the newly developed liposomes and nanoparticles are discussed for their potential use and main challenges in delivering therapeutic agents to bone tissue. As a rapid-developing biotechnology, systemic bonetargeting delivery system is promising but still in its infancy where challenges are ahead of us, including the stability and the toxicity issues, especially to fulfill the regulatory requirement to realize bench-to-bedside translation. Newly developed biomaterials and technologies with potential for safer and more effective drug delivery require multidisciplinary collaborations with preclinical and clinical scientists that are essential to facilitate their clinical applications.

  18. Ionic Colloidal Molding as a Biomimetic Scaffolding Strategy for Uniform Bone Tissue Regeneration.

    Science.gov (United States)

    Zhang, Jian; Jia, Jinpeng; Kim, Jimin P; Shen, Hong; Yang, Fei; Zhang, Qiang; Xu, Meng; Bi, Wenzhi; Wang, Xing; Yang, Jian; Wu, Decheng

    2017-02-21

    Inspired by the highly ordered nanostructure of bone, nanodopant composite biomaterials are gaining special attention for their ability to guide bone tissue regeneration through structural and biological cues. However, bone malformation in orthopedic surgery is a lingering issue, partly due to the high surface energy of traditional nanoparticles contributing to aggregation and inhomogeneity. Recently, carboxyl-functionalized synthetic polymers have been shown to mimic the carboxyl-rich surface motifs of non-collagenous proteins in stabilizing hydroxyapatite and directing intrafibrillar mineralization in-vitro. Based on this biomimetic approach, it is herein demonstrated that carboxyl functionalization of poly(lactic-co-glycolic acid) can achieve great material homogeneity in nanocomposites. This ionic colloidal molding method stabilizes hydroxyapatite precursors to confer even nanodopant packing, improving therapeutic outcomes in bone repair by remarkably improving mechanical properties of nanocomposites and optimizing controlled drug release, resulting in better cell in-growth and osteogenic differentiation. Lastly, better controlled biomaterial degradation significantly improved osteointegration, translating to highly regular bone formation with minimal fibrous tissue and increased bone density in rabbit radial defect models. Ionic colloidal molding is a simple yet effective approach of achieving materials homogeneity and modulating crystal nucleation, serving as an excellent biomimetic scaffolding strategy to rebuild natural bone integrity.

  19. Use of osteoplastic material to guide bone tissue regeneration deffect.

    Science.gov (United States)

    Machavariani, A; Mazmishvili, K; Grdzelidze, T; Menabde, G; Amiranashvili, I

    2011-12-01

    The goal of research was study of restoration processes in jaw-teeth bone defects by application of osteoplastic materials in the experiment. The experiment was performed over 32 white (6-12 month old) rats; the animals were divided into 2 groups; 16 animals were enrolled in the first group; the section was performed in the edge of lower jaw; the lower jaw body was revealed. Under the effect of the dental drilling machine and the # 1 cooling mean by the fissure bohrium (distilled water) the defect of the dimension of 2x2 mm was created; the defect was washed by 0/9% saline to remove the bone sawdust; the wound was sutured tightly, in layers. The second group of the experiment was staffed with 16 animals (main group); the similar bone defect of the size 2 x 2mm was created on the rat's jaw's body. After washing of modeled defect we inserted osteopathic materials PORESORB-TCP crystals with the size of 0,6-1.0 mm the wound was sutured tightly, in layers. After the 3-rd, 15-th, 30-th and 90-th days from the date of operation there was performed X-ray and morphological examination over the animals in the control as well as the main group. The analysis of the examination performed over the experimental materials showed that in the control group in samples taken at 90th day the defects were not completely restored. In the test group in samples taken at 90th day reparative regeneration is confirmed. This is stimulated by the factor that within the main group's animals the defect regeneration process is supported with the osteoplastic material PORESORB-TCP.

  20. 3D bone tissue growth in hollow fibre membrane bioreactor: implications of various process parameters on tissue nutrition.

    Science.gov (United States)

    Abdullah, N S; Das, D B; Ye, H; Cui, Z F

    2006-09-01

    New experimental evidence shows that hollow fibre membrane bioreactor (HFMB) may be applied to grow bulky bone tissues which may then be implanted into patients to repair skeletal defects. To design effective bone tissue engineering protocols, it is necessary to determine the quantitative relationships between the cell environment and tissue behaviour in HFMBs and their relationship with nutrient supply. It is also necessary to determine under what conditions nutritional limitations may occur and, hence, may cause cell death. These require that the appropriate bioreactor conditions for generating neotissues, and the nutrient transfer behaviour and chemical reaction during cell growth and extracellular matrix formation are studied thoroughly. In this paper, we aim to use an existing mathematical framework to analyse the influence of various relevant parameters on nutrient supply for bone tissue growth in HFMB. We adopt the well-known Krogh cylinder approximation of the HFMB. The model parameters (e.g., cell metabolic rates) and operating conditions for the mathematical model have been obtained from, or correspond to, in-house experiments with the exception of a few variables which have been taken from the literature. The framework is then used to study oxygen and glucose transport behaviour in the HFMB. Influence of a number of important process parameters, e.g., reaction kinetics, cell density, inlet concentration of nutrients, etc, on the nutrient distributions have been systematically analysed. The work presented in this paper provides insights on unfavourable system designs and specifications which may be avoided to prevent mass transfer limitations for growing bone tissues in HFMB.

  1. 3D Tissue Scaffold Printing On Custom Artificial Bone Applications

    Directory of Open Access Journals (Sweden)

    Betül ALDEMİR

    2015-01-01

    Full Text Available Production of defect-matching scaffolds is the most critical step in custom artificial bone applications. Three dimensional printing (3DP is one of the best techniques particularly for custom designs on artificial bone applications because of the high controllability and design independency. Our long-term aim is to implant an artificial custom bone that is cultured with patient's own mesenchymal stem cells after determining defect architecture on patient's bone by using CT-scan and printing that defect-matching 3D scaffold with appropriate nontoxic materials. In this study, preliminary results of strength and cytotoxicity measurements of 3D printed scaffolds with modified calcium sulfate compositepowder (MCSCP were presented. CAD designs were created and MCSCP were printed by a 3D printer (3DS, Visijet, PXL Core. Some samples were covered with salt solution in order to harden the samples. MCSCP and salt coated MCSCP were the two experimental groups in this study. Cytotoxicity and mechanical experiments were performed after surface examination withscanning electron microscope (SEM and light microscope. Tension tests were performed for MCSCP and salt coated MCSCP samples. The 3D scaffolds were sterilized with ethylene oxide gas sterilizer, ventilated and conditioned with DMEM (10% FBS. L929 mouse fibroblast cells were cultured on scaffolds (3 repetitive and cell viability was determined using MTT analysis. According to the mechanical results, the MCSCP group stands until average 71,305 N, while salt coated MCSCP group stands until 21,328N. Although the strength difference between two groups is statistically significant (p=0.001, Mann-Whitney U, elastic modulus is not (MCSCP=1,186Pa, salt coated MCSCP=1,169Pa, p=0.445. Cell viability (MTT analysis results on day 1, 3, and 5 demonstrated thatscaffolds hadno toxic effect to the L929 mouse fibroblast cells. Consequently, 3D printed samples with MCSCP could potentially be a strong alternative

  2. The effect of a fibrin glue on the integration of Bio-Oss with bone tissue. A experimental study in labrador dogs.

    Science.gov (United States)

    Carmagnola, Daniela; Berglundh, Tord; Lindhe, Jan

    2002-05-01

    Bio-Oss is a deproteinized bovine mineral used in bone augmentation procedures. The particles are often mixed with a protein product (Tisseel) to form a mouldable graft material. The aim of the present experiment was to study the healing of self-contained bone defects after the placement of Bio-Oss particles alone or mixed with Tisseel in cylindrical defects in the edentulous mandibular ridge of dogs. In 4 labrador dogs, the 2nd, 3rd and 4th mandibular premolars were extracted bilaterally. 3 months later, 3 cylindrical bone defects, 4 mm in diameter and 8 mm in depth, were produced in the right side of the mandible. Following a crestal incision, full thickness flaps were raised and the bone defects were prepared with a trephine drill. The defects were filled with Bio-Oss (Geistlich Biomaterials, Wolhuser, Switzerland) particles alone or mixed with Tisseel (Immuno AG, Vienna, Austria), or left "untreated". A collagen membrane (Bio-Gide, Geistlich Biomaterials, Wolhuser, Switzerland) was placed to cover all defects and the flaps were sutured. 2 months later, the defect preparation and grafting procedures were repeated in the left side of the mandible. After another month, the animals were sacrificed and biopsies obtained from the defect sites. Bio-Oss-treated defects revealed a higher percentage of contact between graft particles and bone tissue than defects treated with Bio-Oss+ Tisseel (15% and 30% at 1 and 3 months versus 0.4% and 8%, respectively). Further, the volume of connective tissue in the Bio-Oss treated defects decreased from the 1 to the 3 month interval (from 44% to 30%). This soft tissue was replaced with newly formed bone. In the Bio-Oss+ Tisseel treated defects, however, the proportion of connective tissue remained unchanged between 1 and 3 months. The adjunct of Tisseel may jeopardize the integration of Bio-Oss particles with bone tissue.

  3. Reduced tissue hardness of trabecular bone is associated with severe osteoarthritis.

    Science.gov (United States)

    Dall'Ara, Enrico; Ohman, Caroline; Baleani, Massimiliano; Viceconti, Marco

    2011-05-17

    This study investigated whether changes in hardness of human trabecular bone are associated with osteoarthritis. Twenty femoral heads extracted from subjects without musculoskeletal diseases (subject age: 49-83 years) and twenty femoral heads extracted from osteoarthritic subjects (subject age: 42-85 years) were tested. Sixty indentations were performed along the main trabecular direction of each sample at a fixed relative distance. Two microstructures were found on the indenting locations: packs of parallel-lamellae (PL) and secondary osteons (SO). A 25gf load was applied for 15s and the Vickers Hardness (HV) was assessed. Trabecular tissue extracted from osteoarthritic subjects was found to be about 13% less hard compared to tissue extracted from non-pathologic subjects. However, tissue hardness was not significantly affected by gender or age. The SO was 10% less hard than the PL for both pathologic and non-pathologic tissues. A hardness of 34.1HV for PL and 30.8HV for SO was found for the non-pathologic tissue. For osteoarthritic tissue, the hardness was 30.2HV for PL and 27.1HV for SO. In the bone tissue extracted from osteoarthritic subjects the occurrence of indenting a SO (28%) was higher than that observed in the non-pathological tissue (15%). Osteoarthritis is associated with reduced tissue hardness and alterations in microstructure of the trabecular bone tissue. Gender does not significantly affect trabecular bone hardness either in non-pathological or osteoarthritic subjects. A similar conclusion can be drawn for age, although a larger donor sample size would be necessary to definitively exclude the existence of a slight effect.

  4. Mechanical unloading of bone in microgravity reduces mesenchymal and hematopoietic stem cell-mediated tissue regeneration

    Directory of Open Access Journals (Sweden)

    E.A. Blaber

    2014-09-01

    Full Text Available Mechanical loading of mammalian tissues is a potent promoter of tissue growth and regeneration, whilst unloading in microgravity can cause reduced tissue regeneration, possibly through effects on stem cell tissue progenitors. To test the specific hypothesis that mechanical unloading alters differentiation of bone marrow mesenchymal and hematopoietic stem cell lineages, we studied cellular and molecular aspects of how bone marrow in the mouse proximal femur responds to unloading in microgravity. Trabecular and cortical endosteal bone surfaces in the femoral head underwent significant bone resorption in microgravity, enlarging the marrow cavity. Cells isolated from the femoral head marrow compartment showed significant down-regulation of gene expression markers for early mesenchymal and hematopoietic differentiation, including FUT1(−6.72, CSF2(−3.30, CD90(−3.33, PTPRC(−2.79, and GDF15(−2.45, but not stem cell markers, such as SOX2. At the cellular level, in situ histological analysis revealed decreased megakaryocyte numbers whilst erythrocytes were increased 2.33 fold. Furthermore, erythrocytes displayed elevated fucosylation and clustering adjacent to sinuses forming the marrow–blood barrier, possibly providing a mechanistic basis for explaining spaceflight anemia. Culture of isolated bone marrow cells immediately after microgravity exposure increased the marrow progenitor's potential for mesenchymal differentiation into in-vitro mineralized bone nodules, and hematopoietic differentiation into osteoclasts, suggesting an accumulation of undifferentiated progenitors during exposure to microgravity. These results support the idea that mechanical unloading of mammalian tissues in microgravity is a strong inhibitor of tissue growth and regeneration mechanisms, acting at the level of early mesenchymal and hematopoietic stem cell differentiation.

  5. Paper-based bioactive scaffolds for stem cell-mediated bone tissue engineering.

    Science.gov (United States)

    Park, Hyun-Ji; Yu, Seung Jung; Yang, Kisuk; Jin, Yoonhee; Cho, Ann-Na; Kim, Jin; Lee, Bora; Yang, Hee Seok; Im, Sung Gap; Cho, Seung-Woo

    2014-12-01

    Bioactive, functional scaffolds are required to improve the regenerative potential of stem cells for tissue reconstruction and functional recovery of damaged tissues. Here, we report a paper-based bioactive scaffold platform for stem cell culture and transplantation for bone reconstruction. The paper scaffolds are surface-engineered by an initiated chemical vapor deposition process for serial coating of a water-repellent and cell-adhesive polymer film, which ensures the long-term stability in cell culture medium and induces efficient cell attachment. The prepared paper scaffolds are compatible with general stem cell culture and manipulation techniques. An optimal paper type is found to provide structural, physical, and mechanical cues to enhance the osteogenic differentiation of human adipose-derived stem cells (hADSCs). A bioactive paper scaffold significantly enhances in vivo bone regeneration of hADSCs in a critical-sized calvarial bone defect. Stacking the paper scaffolds with osteogenically differentiated hADSCs and human endothelial cells resulted in vascularized bone formation in vivo. Our study suggests that paper possesses great potential as a bioactive, functional, and cost-effective scaffold platform for stem cell-mediated bone tissue engineering. To the best of our knowledge, this is the first study reporting the feasibility of a paper material for stem cell application to repair tissue defects. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Scaffolds for Growth Factor Delivery as Applied to Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Keith A. Blackwood

    2012-01-01

    Full Text Available There remains a substantial shortfall in the treatment of severe skeletal injuries. The current gold standard of autologous bone grafting from the same patient has many undesirable side effects associated such as donor site morbidity. Tissue engineering seeks to offer a solution to this problem. The primary requirements for tissue-engineered scaffolds have already been well established, and many materials, such as polyesters, present themselves as potential candidates for bone defects; they have comparable structural features, but they often lack the required osteoconductivity to promote adequate bone regeneration. By combining these materials with biological growth factors, which promote the infiltration of cells into the scaffold as well as the differentiation into the specific cell and tissue type, it is possible to increase the formation of new bone. However due to the cost and potential complications associated with growth factors, controlling the rate of release is an important design consideration when developing new bone tissue engineering strategies. This paper will cover recent research in the area of encapsulation and release of growth factors within a variety of different polymeric scaffolds.

  7. Bone Tissue Engineering with Adipose-Derived Stem Cells in Bioactive Composites of Laser-Sintered Porous Polycaprolactone Scaffolds and Platelet-Rich Plasma

    Directory of Open Access Journals (Sweden)

    Han-Tsung Liao

    2013-10-01

    Full Text Available Three-dimensional porous polycaprolactone (PCL scaffolds with consistent inter-pore channels, 83% porosity and 300–400 μm pore size were fabricated via selective laser sintering. The PCL scaffold was combined with platelet-rich plasma (PRP to form a bioactive composite and studied for potential application in bone tissue engineering using porcine adipose-derived stem cells (PASCs. The PCL/PRP/PASCs construct showed enhanced cell seeding efficiency and synergistically increased the differentiation capability of PASCs in osteogenic medium toward the osteoblast lineage, judging from elevated alkaline phosphatase activity and up-regulated osteogenic genes expression. For in vivo study, a 3 cm × 3 cm mandible defect was created in pigs and reconstructed by implanting acellular PCL scaffolds or PCL/PRP/PASCs constructs. Both groups showed new bone formation, however, the new bone volume was 5.1 times higher for PCL/PRP/PASCs 6 months post-operation. The bone density was less and loose in the acellular PCL group and the Young’s modulus was only 29% of normal bone. In contrast, continued and compact bone formation was found in PCL/PRP/PASCs and the Young’s modulus was 81% that of normal bone. Masson’s trichrome stain, immunohistochemical analysis of osteocalcin and collagen type I also confirmed new bone formation.

  8. Training volume and soft tissue injury in professional and non-professional rugby union players: a systematic review.

    Science.gov (United States)

    Ball, Shane; Halaki, Mark; Orr, Rhonda

    2017-07-01

    To investigate the relationship between training volume and soft tissue injury incidence, and characterise soft tissue injury in rugby union players. A systematic search of electronic databases was performed. The search strategy combined terms covering: training volume and injury, and rugby union, and players of all levels. Medline, SPORTDiscus, Web of Science, Embase, PubMed. Studies were included if they reported: male rugby union players, a clear definition of a rugby union injury, the amount of training volume undertaken by participants, and epidemiological data for soft-tissue injuries including the number or incidence. 15 studies were eligible for inclusion. Overall match and training injury incidence ranged from 3.3 to 218.0 injuries/1000 player match hours and 0.1-6.1 injuries/1000 player training hours, respectively. Muscle and tendon as well as joint (non-bone) and ligament injuries were the most frequently occurring injuries. The lower limb was the most prevalent injury location. Injury incidence was higher in professional rugby union players than non-professional players. Contact events were responsible for the greatest injury incidence. For non-contact mechanisms, running was responsible for the highest injury incidence. Inconsistent injury definitions hindered reliable comparison of injury data. The lack of reporting training volumes in hours per player per week limited the ability to investigate associations between training volume and injury incidence. A higher level of play may result in higher match injury incidence. Muscle and tendon injuries were the most common type of soft tissue injury, while the lower limb was the most common location of injury in rugby union players, and running was responsible for the highest injury incidence during non-contact events. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  9. Biomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    John G. Hardy

    2016-07-01

    Full Text Available Materials based on biodegradable polyesters, such as poly(butylene terephthalate (PBT or poly(butylene terephthalate-co-poly(alkylene glycol terephthalate (PBTAT, have potential application as pro-regenerative scaffolds for bone tissue engineering. Herein, the preparation of films composed of PBT or PBTAT and an engineered spider silk protein, (eADF4(C16, that displays multiple carboxylic acid moieties capable of binding calcium ions and facilitating their biomineralization with calcium carbonate or calcium phosphate is reported. Human mesenchymal stem cells cultured on films mineralized with calcium phosphate show enhanced levels of alkaline phosphatase activity suggesting that such composites have potential use for bone tissue engineering.

  10. Baculovirus as a gene delivery vector for cartilage and bone tissue engineering.

    Science.gov (United States)

    Lin, Chin-Yu; Lu, Chia-Hsin; Luo, Wen-Yi; Chang, Yu-Han; Sung, Li-Yu; Chiu, Hsin-Yi; Hu, Yu-Chen

    2010-06-01

    Baculovirus is an effective vector for gene delivery into various mammalian cells, including chondrocytes and mesenchymal stem cells, and has been employed for diverse applications. By gene delivery and expression of the growth factor, recombinant baculovirus has been shown to modulate the differentiation state of the cells and stimulates the production of extracellular matrix and tissue formation, hence repairing the damaged cartilage and bone in vivo. This article reviews the studies pertaining to the applications of baculovirus-mediated gene delivery in cartilage and bone tissue engineering and discusses recent progress, future applications and potential hurdles.

  11. Solid volume fraction estimation of bone:marrow replica models using ultrasound transit time spectroscopy.

    Science.gov (United States)

    Wille, Marie-Luise; Langton, Christian M

    2016-02-01

    The acceptance of broadband ultrasound attenuation (BUA) for the assessment of osteoporosis suffers from a limited understanding of both ultrasound wave propagation through cancellous bone and its exact dependence upon the material and structural properties. It has recently been proposed that ultrasound wave propagation in cancellous bone may be described by a concept of parallel sonic rays; the transit time of each ray defined by the proportion of bone and marrow propagated. A Transit Time Spectrum (TTS) describes the proportion of sonic rays having a particular transit time, effectively describing the lateral inhomogeneity of transit times over the surface aperture of the receive ultrasound transducer. The aim of this study was to test the hypothesis that the solid volume fraction (SVF) of simplified bone:marrow replica models may be reliably estimated from the corresponding ultrasound transit time spectrum. Transit time spectra were derived via digital deconvolution of the experimentally measured input and output ultrasonic signals, and compared to predicted TTS based on the parallel sonic ray concept, demonstrating agreement in both position and amplitude of spectral peaks. Solid volume fraction was calculated from the TTS; agreement between true (geometric calculation) with predicted (computer simulation) and experimentally-derived values were R(2)=99.9% and R(2)=97.3% respectively. It is therefore envisaged that ultrasound transit time spectroscopy (UTTS) offers the potential to reliably estimate bone mineral density and hence the established T-score parameter for clinical osteoporosis assessment.

  12. Nanohydroxyapatite Effect on the Degradation, Osteoconduction and Mechanical Properties of Polymeric Bone Tissue Engineered Scaffolds

    Science.gov (United States)

    Salmasi, Shima; Nayyer, Leila; Seifalian, Alexander M.; Blunn, Gordon W.

    2016-01-01

    BACKGROUND Statistical reports show that every year around the world approximately 15 million bone fractures occur; of which up to 10% fail to heal completely and hence lead to complications of non-union healing. In the past, autografts or allografts were used as the “gold standard” of treating such defects. However, due to various limitations and risks associated with these sources of bone grafts, other avenues have been extensively investigated through which bone tissue engineering; in particular engineering of synthetic bone graft substitutes, has been recognised as a promising alternative to the traditional methods. METHODS A selective literature search was performed. RESULTS Bone tissue engineering offers unlimited supply, eliminated risk of disease transmission and relatively low cost. It could also lead to patient specific design and manufacture of implants, prosthesis and bone related devices. A potentially promising building block for a suitable scaffold is synthetic nanohydroxyapatite incorporated into synthetic polymers. Incorporation of nanohydroxyapatite into synthetic polymers has shown promising bioactivity, osteoconductivity, mechanical properties and degradation profile compared to other techniques previously considered. CONCLUSION Scientific research, through extensive physiochemical characterisation, in vitro and in vivo assessment has brought together the optimum characteristics of nanohydroxyapatite and various types of synthetic polymers in order to develop nanocomposites of suitable nature for bone tissue engineering. The aim of the present article is to review and update various aspects involved in incorporation of synthetic nanohydroxyapatite into synthetic polymers, in terms of their potentials to promote bone growth and regeneration in vitro, in vivo and consequently in clinical applications. PMID:28217213

  13. Prefabrication of axial vascularized tissue engineering coral bone by an arteriovenous loop: A better model

    Energy Technology Data Exchange (ETDEWEB)

    Dong Qingshan [Department of Oral and Maxillofacial Surgery, Wuhan General Hospital of Guangzhou Military Command, Wuhan 430070 (China); Shang Hongtao; Wu Wei [Department of Oral and Maxillofacial Surgery, School of Stomatology, Fourth Military Medical University, Xi' an 710032 (China); Chen Fulin [Lab of Tissue Engineering, Faculty of Life Science, Northwest University, Xi' an 710069 (China); Zhang Junrui [Department of Oral and Maxillofacial Surgery, School of Stomatology, Fourth Military Medical University, Xi' an 710032 (China); Guo Jiaping [Department of Oral and Maxillofacial Surgery, Wuhan General Hospital of Guangzhou Military Command, Wuhan 430070 (China); Mao Tianqiu, E-mail: tianqiumao@126.com [Department of Oral and Maxillofacial Surgery, School of Stomatology, Fourth Military Medical University, Xi' an 710032 (China)

    2012-08-01

    The most important problem for the survival of thick 3-dimensional tissues is the lack of vascularization in the context of bone tissue engineering. In this study, a modified arteriovenous loop (AVL) was developed to prefabricate an axial vascularized tissue engineering coral bone in rabbit, with comparison of the arteriovenous bundle (AVB) model. An arteriovenous fistula between rabbit femoral artery and vein was anastomosed to form an AVL. It was placed in a circular side groove of the coral block. The complex was wrapped with an expanded-polytetrafluoroethylene membrane and implanted beneath inguinal skin. After 2, 4, 6 and 8 weeks, the degree of vascularization was evaluated by India ink perfusion, histological examination, vascular casts, and scanning electron microscopy images of vascular endangium. Newly formed fibrous tissues and vasculature extended over the surfaces and invaded the interspaces of entire coral block. The new blood vessels robustly sprouted from the AVL. Those invaginated cavities in the vascular endangium from scanning electron microscopy indicated vessel's sprouted pores. Above indexes in AVL model are all superior to that in AVB model, indicating that the modified AVL model could more effectively develop vascularization in larger tissue engineering bone. - Highlights: Black-Right-Pointing-Pointer A modified arteriovenous loop (AVL) model in rabbit was developed in this study. Black-Right-Pointing-Pointer Axial prevascularization was induced in a larger coral block by using the AVL. Black-Right-Pointing-Pointer The prefabrication of axial vascularized coral bone is superior as vascular carrier.

  14. Can Bone Tissue Engineering Contribute to Therapy Concepts after Resection of Musculoskeletal Sarcoma?

    Directory of Open Access Journals (Sweden)

    Boris Michael Holzapfel

    2013-01-01

    Full Text Available Resection of musculoskeletal sarcoma can result in large bone defects where regeneration is needed in a quantity far beyond the normal potential of self-healing. In many cases, these defects exhibit a limited intrinsic regenerative potential due to an adjuvant therapeutic regimen, seroma, or infection. Therefore, reconstruction of these defects is still one of the most demanding procedures in orthopaedic surgery. The constraints of common treatment strategies have triggered a need for new therapeutic concepts to design and engineer unparalleled structural and functioning bone grafts. To satisfy the need for long-term repair and good clinical outcome, a paradigm shift is needed from methods to replace tissues with inert medical devices to more biological approaches that focus on the repair and reconstruction of tissue structure and function. It is within this context that the field of bone tissue engineering can offer solutions to be implemented into surgical therapy concepts after resection of bone and soft tissue sarcoma. In this paper we will discuss the implementation of tissue engineering concepts into the clinical field of orthopaedic oncology.

  15. Changes of vessel-cells complex in zones of adaptive remodeling of the bone tissue under microgravity conditions

    Science.gov (United States)

    Rodionova, N.; Oganov, V.; Nosova, L.

    The development and differentiation of osteogenic cells in organism happen in closely topographical and functional connection with blood capillaries. We formerly proofed, that small-differentiated cells, which are in the population of perivascular cells are osteogenic cells -precursors . At the present time it is actually to clear up, how these biostructures react on conditions of less of biomechanical load on skeleton bones. We researched peculiarities of blood-bed structure and perivascular cells in metaphises of thighbones and tibial bones in rats, which were onboard the American space station SLS-2 and in experiments of modeling hypokinesia. There were used methods of cytochemistry, histology and electron microscopy. We established, that under the support and functional load decreasing in zones of bones adaptive remodeling, comparatively to control, on histosections the own volume of sinusoid capillaries reduces. The small vessels prevail here. The spaces of sinusoid capillaries are limited by 1 2 cells of the endothelia. Endotheliocytes in- general have the typical ultrastructure. Basal membranes are expressed not-distinctly. Perivascular cells don't create the unbroken layer. The population of these cells is not-homogeneous. It includes enclosed to endothelia small-differentiated forms and separating cells with sings of fibroblastic differentiation (the own volume of rough endoplasmic reticulum in cytoplasm induces). The part of these cells reacts on the alkaline phosphatase (the marker of the osteogenic differentiation). Under the conditions of support load decreasing (especially under the microgravity) there is a tendency to reducing of separating osteogenic cells number. We noted the priority of differentiating fibroblasts. It leads to further development in zones of bone remodeling of hearths of fibrous tissue, that doesn't mineralize. The obtained data are seen as one of mechanisms of osteoporosis and osteopenia development under the deficite of support

  16. Researches of mechanical behaviour of the bone micro volumes and porous ceramics under uniaxial compression

    Science.gov (United States)

    Kolmakova, T. V.; Buyakova, S. P.; Kulkov, S. N.

    2017-02-01

    The research results of the mechanics are presented and the effective mechanical characteristics under uniaxial compression of the simulative micro volume of the compact bone are defined subject to the direction of the collagen-mineral fibers, porosity and mineral content. The experimental and computer studies of the mechanics are performed and the effective mechanical characteristics of the porous zirconium oxide ceramics are defined. The recommendations are developed on the selection of the ceramic samples designed to replace the fragment of the compact bone of a definite structure and mineral content.

  17. Repair of segmental bone defect using Totally Vitalized tissue engineered bone graft by a combined perfusion seeding and culture system.

    Directory of Open Access Journals (Sweden)

    Lin Wang

    Full Text Available BACKGROUND: The basic strategy to construct tissue engineered bone graft (TEBG is to combine osteoblastic cells with three dimensional (3D scaffold. Based on this strategy, we proposed the "Totally Vitalized TEBG" (TV-TEBG which was characterized by abundant and homogenously distributed cells with enhanced cell proliferation and differentiation and further investigated its biological performance in repairing segmental bone defect. METHODS: In this study, we constructed the TV-TEBG with the combination of customized flow perfusion seeding/culture system and β-tricalcium phosphate (β-TCP scaffold fabricated by Rapid Prototyping (RP technique. We systemically compared three kinds of TEBG constructed by perfusion seeding and perfusion culture (PSPC method, static seeding and perfusion culture (SSPC method, and static seeding and static culture (SSSC method for their in vitro performance and bone defect healing efficacy with a rabbit model. RESULTS: Our study has demonstrated that TEBG constructed by PSPC method exhibited better biological properties with higher daily D-glucose consumption, increased cell proliferation and differentiation, and better cell distribution, indicating the successful construction of TV-TEBG. After implanted into rabbit radius defects for 12 weeks, PSPC group exerted higher X-ray score close to autograft, much greater mechanical property evidenced by the biomechanical testing and significantly higher new bone formation as shown by histological analysis compared with the other two groups, and eventually obtained favorable healing efficacy of the segmental bone defect that was the closest to autograft transplantation. CONCLUSION: This study demonstrated the feasibility of TV-TEBG construction with combination of perfusion seeding, perfusion culture and RP technique which exerted excellent biological properties. The application of TV-TEBG may become a preferred candidate for segmental bone defect repair in orthopedic and

  18. Soft tissues, areal bone mineral density and hip geometry estimates in active young boys: the PRO-BONE study.

    Science.gov (United States)

    Wilkinson, Kelly; Vlachopoulos, Dimitris; Klentrou, Panagiota; Ubago-Guisado, Esther; De Moraes, Augusto César Ferreira; Barker, Alan R; Williams, Craig A; Moreno, Luis A; Gracia-Marco, Luis

    2017-04-01

    Soft tissues, such as fat mass (FM) and lean mass (LM), play an important role in bone development but this is poorly understood in highly active youths. The objective of this study was to determine whether FM or LM is a stronger predictor of areal bone mineral density (aBMD) and hip geometry estimates in a group of physically active boys after adjusting for height, chronological age, moderate-to-vigorous physical activity (MVPA), FM, and LM. Participants included 121 boys (13.1 ± 1.0 years) from the PRO-BONE study. Bone mineral content (BMC) and aBMD were measured at total body, femoral neck and lumbar spine using dual-energy X-ray absorptiometry (DXA), and hip structural analysis was used to estimate bone geometry at the femoral neck. Body composition was assessed using DXA. The relationships of FM and LM with bone outcomes were analysed using simple and multiple linear regression analyses. Pearson correlation coefficients showed that total body (less head) aBMD was significantly correlated with LM but not FM. Multiple linear regression analyses showed that FM, after accounting for height, age, MVPA and LM had no significant relationship with aBMD or hip geometry estimates, except for arms aBMD. By contrast, there were positive associations between LM and most aBMD and hip geometry estimates, after accounting height, age, MVPA and FM. The results of this study suggest that LM, and not FM, is the stronger predictor of aBMD and hip geometry estimates in physically active boys. ClinicalTrials.gov ISRCTN17982776.

  19. Effect of coating Straumann Bone Ceramic with Emdogain on mesenchymal stromal cell hard tissue formation.

    Science.gov (United States)

    Mrozik, Krzysztof Marek; Gronthos, Stan; Menicanin, Danijela; Marino, Victor; Bartold, P Mark

    2012-06-01

    Periodontal tissue engineering requires a suitable biocompatible scaffold, cells with regenerative capacity, and instructional molecules. In this study, we investigated the capacity of Straumann Bone Ceramic coated with Straumann Emdogain, a clinical preparation of enamel matrix protein (EMP), to aid in hard tissue formation by post-natal mesenchymal stromal cells (MSCs) including bone marrow stromal cells (BMSCs) and periodontal ligament fibroblasts (PDLFs). MSCs were isolated and ex vivo-expanded from human bone marrow and periodontal ligament and, in culture, allowed to attach to Bone Ceramic in the presence or absence of Emdogain. Gene expression of bone-related proteins was investigated by real time RT-PCR for 72 h, and ectopic bone formation was assessed histologically in subcutaneous implants of Bone Ceramic containing MSCs with or without Emdogain in NOD/SCID mice. Alkaline phosphatase activity was also assessed in vitro, in the presence or absence of Emdogain. Collagen-I mRNA was up-regulated in both MSC populations over the 72-h time course with Emdogain. Expression of BMP-2 and the osteogenic transcription factor Cbfa-1 showed early stimulation in both MSC types after 24 h. In contrast, expression of BMP-4 was consistently down-regulated in both MSC types with Emdogain. Up-regulation of osteopontin and periostin mRNA was restricted to BMSCs, while higher levels of bone sialoprotein-II were observed in PDLFs with Emdogain. Furthermore, alkaline phosphatase activity levels were reduced in both BMSCs and PDLFs in the presence of Emdogain. Very little evidence was found for ectopic bone formation following subcutaneous implantation of MSCs with Emdogain-coated or -uncoated Bone Ceramic in NOD/SCID mice. The early up-regulation of several important bone-related genes suggests that Emdogain may have a significant stimulatory effect in the commitment of mesenchymal cells to osteogenic differentiation in vitro. While Emdogain inhibited AP activity and appeared

  20. Development of Collagen/Demineralized Bone Powder Scaffolds and Periosteum-Derived Cells for Bone Tissue Engineering Application

    Directory of Open Access Journals (Sweden)

    Wilairat Leeanansaksiri

    2013-01-01

    Full Text Available The aim of this study was to investigate physical and biological properties of collagen (COL and demineralized bone powder (DBP scaffolds for bone tissue engineering. DBP was prepared and divided into three groups, based on various particle sizes: 75–125 µm, 125–250 µm, and 250–500 µm. DBP was homogeneously mixed with type I collagen and three-dimensional scaffolds were constructed, applying chemical crosslinking and lyophilization. Upon culture with human periosteum-derived cells (PD cells, osteogenic differentiation of PD cells was investigated using alkaline phosphatase (ALP activity and calcium assay kits. The physical properties of the COL/DBP scaffolds were obviously different from COL scaffolds, irrespective of the size of DBP. In addition, PD cells cultured with COL scaffolds showed significantly higher cell adhesion and proliferation than those with COL/DBP scaffolds. In contrast, COL/DBP scaffolds exhibited greater osteoinductive potential than COL scaffolds. The PD cells with COL/DBP scaffolds possessed higher ALP activity than those with COL scaffolds. PD cells cultured with COL/DBP scaffolds with 250–500 mm particle size yielded the maximum calcium deposition. In conclusion, PD cells cultured on the scaffolds could exhibit osteoinductive potential. The composite scaffold of COL/DBP with 250–500 mm particle size could be considered a potential bone tissue engineering implant.

  1. Fabrication and characterization of strontium incorporated 3-D bioactive glass scaffolds for bone tissue from biosilica.

    Science.gov (United States)

    Özarslan, Ali Can; Yücel, Sevil

    2016-11-01

    Bioactive glass scaffolds that contain silica are high viable biomaterials as bone supporters for bone tissue engineering due to their bioactive behaviour in simulated body fluid (SBF). In the human body, these materials help inorganic bone structure formation due to a combination of the particular ratio of elements such as silicon (Si), calcium (Ca), sodium (Na) and phosphorus (P), and the doping of strontium (Sr) into the scaffold structure increases their bioactive behaviour. In this study, bioactive glass scaffolds were produced by using rice hull ash (RHA) silica and commercial silica based bioactive glasses. The structural properties of scaffolds such as pore size, porosity and also the bioactive behaviour were investigated. The results showed that undoped and Sr-doped RHA silica-based bioactive glass scaffolds have better bioactivity than that of commercial silica based bioactive glass scaffolds. Moreover, undoped and Sr-doped RHA silica-based bioactive glass scaffolds will be able to be used instead of undoped and Sr-doped commercial silica based bioactive glass scaffolds for bone regeneration applications. Scaffolds that are produced from undoped or Sr-doped RHA silica have high potential to form new bone for bone defects in tissue engineering. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Long bone defect models for tissue engineering applications: criteria for choice.

    Science.gov (United States)

    Horner, Elizabeth A; Kirkham, Jennifer; Wood, David; Curran, Stephen; Smith, Mark; Thomson, Brian; Yang, Xuebin B

    2010-04-01

    The replacement and repair of bone lost due to trauma, cancer, or congenital defects is a major clinical challenge. Skeletal tissue engineering is a potentially powerful strategy in modern regenerative medicine, and research in this field has increased greatly in recent years. Tissue engineering strategies seek to translate research findings in the fields of materials science, stem cell biology, and biomineralization into clinical applications, demanding the use of appropriate in vivo models to investigate bone regeneration of the long bone. However, identification of the optimal in vivo segmental bone defect model from the literature is difficult due to the use of different animal species (large and small mammals), different bones (weight-bearing and nonweight bearing), and multiple protocols, including the use of various scaffolds, cells, and bioactives. The aim of this review is to summarize the available animal models for evaluating long bone regeneration in vivo. We highlight the differences not only in species and sites but also in defect size, means of defect creation, duration of study, and fixation method. A critical evaluation of the most clinically relevant models is addressed to guide the researcher in his/her choice of the most appropriate model to use in future hypothesis-driven investigations.

  3. Assessment of bone tissue during treatment dentoalveolar anomalies in children with scoliosis

    Directory of Open Access Journals (Sweden)

    Samoilenko A.V.

    2012-01-01

    Full Text Available The purpose of the study was to develop a rational method of treatment dentoalveolar anomalies aimed at reducing relapses dentoalveolar anomalies, duration of treatment, depending on bone density in patients with scoliosis. Scoliosis is often associated with osteopenia and impaired metabolism of connective tissue that manifested reduced bone mineral density and changes in metabolic status, impaired synthesis of the major structural components of connective tissue, resulting integral reaction to a combination of two abnormal situations - osteopenia and scoliotic deformity. Prevalence dentoalveolar anomalies abnormalities among patients with scoliosis reaches 81.6%, in most cases accompanied by gingivitis. Therefore, the need for orthodontic treatment in these patients is quite high. When scoliosis orthodontic treatment has an impact on pathologically changed bone, so the retention period of orthodontic treatment need prescriptions that enhance the adaptive capacity of the body and promote reparative bone formation and development of pathogenetically substantiated complex preventive measures aimed at improving the effectiveness of treatment and prevention of dentoalveolar anomalies recurrence. A biometric study of control and diagnostic models of the jaws, biochemical oral fluid, determining bone density by ultrasonic osteography, the timing of orthodontic treatment in patients, with jaw abnormalities suffering from scoliosis and various sites of varying severity. We have developed medical centers showed high efficiency, which showed an increase density and improve bone metabolism.

  4. Microfibril orientation dominates the microelastic properties of human bone tissue at the lamellar length scale.

    Directory of Open Access Journals (Sweden)

    Mathilde Granke

    Full Text Available The elastic properties of bone tissue determine the biomechanical behavior of bone at the organ level. It is now widely accepted that the nanoscale structure of bone plays an important role to determine the elastic properties at the tissue level. Hence, in addition to the mineral density, the structure and organization of the mineral nanoparticles and of the collagen microfibrils appear as potential key factors governing the elasticity. Many studies exist on the role of the organization of collagen microfibril and mineral nanocrystals in strongly remodeled bone. However, there is no direct experimental proof to support the theoretical calculations. Here, we provide such evidence through a novel approach combining several high resolution imaging techniques: scanning acoustic microscopy, quantitative scanning small-Angle X-ray scattering imaging and synchrotron radiation computed microtomography. We find that the periodic modulations of elasticity across osteonal bone are essentially determined by the orientation of the mineral nanoparticles and to a lesser extent only by the particle size and density. Based on the strong correlation between the orientation of the mineral nanoparticles and the collagen molecules, we conclude that the microfibril orientation is the main determinant of the observed undulations of microelastic properties in regions of constant mineralization in osteonal lamellar bone. This multimodal approach could be applied to a much broader range of fibrous biological materials for the purpose of biomimetic technologies.

  5. Scaling relations between bone volume and bone structure as found using 3D µCT images of the trabecular bone taken from different skeletal sites

    Science.gov (United States)

    Raeth, Christoph; Müller, Dirk; Sidorenko, Irina; Monetti, Roberto; Eckstein, Felix; Matsuura, Maiko; Lochmüller, Eva-Maria; Zysset, Philippe K.; Bauer, Jan

    2010-03-01

    According to Wolff's law bone remodels in response to the mechanical stresses it experiences so as to produce a minimal-weight structure that is adapted to its applied stresses. Here, we investigate the relations between bone volume and structure for the trabecular bone using 3D μCT images taken from different skeletal sites in vitro, namely from the distal radii (96 specimens), thoracic (73 specimens) and lumbar vertebrae (78 specimens). We determine the local structure of the trabecular network by calculating isotropic and anisotropic scaling indices (α, αz). These measures have been proven to be able to discriminate rod- from sheet-like structures and to quantify the alignment of structures with respect to a preferential direction as given by the direction of the external force. Comparing global structure measures derived from the scaling indices (mean, standard deviation) with the bone mass (BV/TV) we find that all correlations obey very accurately power laws with scaling exponents of 0.14, 0.12, 0.15 (~), -0.2, -017, -0.17 (σ(αz)), 0.09, 0.05, 0.07 (~) and -0.20, -0.11 ,-0.13 (σ(αz)) distal radius, thoracic vertebra and lumbar vertebra respectively. Thus, these relations turn out to be site-independent, albeit the mechanical stresses to which the bones of the forearm and the spine are exposed, are quite different. The similar alignment might not be in agreement with a universal validity of Wolff's law. On the other hand, such universal power law relations may allow to develop additional diagnostic means to better assess healthy and osteoporotic bone.

  6. Interactions between inorganic and organic phases in bone tissue as a source of inspiration for design of novel nanocomposites

    NARCIS (Netherlands)

    Farbod, K.; Nejadnik, M.R.; Jansen, J.A.; Leeuwenburgh, S.C.G.

    2014-01-01

    Mimicking the nanostructure of bone and understanding the interactions between the nanoscale inorganic and organic components of the extracellular bone matrix are crucial for the design of biomaterials with structural properties and a functionality similar to the natural bone tissue. Generally, thes

  7. Development of bioactive porous α-TCP/HAp beads for bone tissue engineering.

    Science.gov (United States)

    Asaoka, Teruo; Ohtake, Shoji; Furukawa, Katsuko S; Tamura, Akito; Ushida, Takashi

    2013-11-01

    Porous beads of bioactive ceramics such as hydroxyapatite (HAp) and tribasic calcium phosphate (TCP) are considered a promising scaffold for cultivating bone cells. To realize this, α-TCP/HAp functionally graded porous beads are fabricated with two main purposes: to maintain the function of the scaffold with sufficient strength up to the growth of new bone, and is absorbed completely after the growth. HAp is a bioactive material that has both high strength and strong tissue-adhesive properties, but is not readily absorbed by the human body. On the contrary, α-TCP is highly bioabsorbable, resulting in a scaffold that is absorbed before it is completely replaced by bone. In this study, we produced porous, bead-shaped carriers as scaffolds for osteoblast culture. To control the solubility in vivo, the fabricated beads contained α-TCP at the center and HAp at the surface. Cell adaptability of these beads for bone tissue engineering was confirmed in vitro. It was found that α-TCP/HAp bead carriers exhibit low toxicity in the initial stages of cell seeding and cell adhesion. The presence of HAp in the composite bead form effectively increased ALP activity. In conclusion, it is suggested that these newly developed α-TCP/HAp beads are a promising tool for bone tissue engineering.

  8. Prediction of Local Ultimate Strain and Toughness of Trabecular Bone Tissue by Raman Material Composition Analysis

    Directory of Open Access Journals (Sweden)

    Roberto Carretta

    2015-01-01

    Full Text Available Clinical studies indicate that bone mineral density correlates with fracture risk at the population level but does not correlate with individual fracture risk well. Current research aims to better understand the failure mechanism of bone and to identify key determinants of bone quality, thus improving fracture risk prediction. To get a better understanding of bone strength, it is important to analyze tissue-level properties not influenced by macro- or microarchitectural factors. The aim of this pilot study was to identify whether and to what extent material properties are correlated with mechanical properties at the tissue level. The influence of macro- or microarchitectural factors was excluded by testing individual trabeculae. Previously reported data of mechanical parameters measured in single trabeculae under tension and bending and its compositional properties measured by Raman spectroscopy was evaluated. Linear and multivariate regressions show that bone matrix quality but not quantity was significantly and independently correlated with the tissue-level ultimate strain and postyield work (r=0.65–0.94. Principal component analysis extracted three independent components explaining 86% of the total variance, representing elastic, yield, and ultimate components according to the included mechanical parameters. Some matrix parameters were both included in the ultimate component, indicating that the variation in ultimate strain and postyield work could be largely explained by Raman-derived compositional parameters.

  9. EFFECTS OF HYALURONAN ON THREE-DIMENSIONAL MICROARCHITECTURE OF SUBCHONDRAL BONE TISSUES IN GUINEA PIG PRIMARY OSTEOARTHROSIS

    DEFF Research Database (Denmark)

    Ding, Ming

    Introduction: It is not known whether hyaluronan (HA) has any effect on the underlying subchondral bone tissues. This study was to investigate the effects of high molecular weight HA (1.5x106 Daltons) intra-articular injection on subchondral bone tissues. Methods: Fifty-six male guinea pigs (6......-term study, these latter changes were more pronounced, with an additionally significant decrease in connectivity and bone surface density. HA groups had greater bone mineral concentration and mineral density, lower collagen to mineral ratio, and preserved the mechanical properties of cancellous bone....... The effects of HA on cartilage and subchondral bone were maintained when HA treatment was discontinued. Discussion: Significant positive effects of high molecular weight HA on the articular cartilage and subchondral bone tissues were seen. HA protects against OA-related cartilage degradation to almost normal...

  10. Combination of bone morphogenetic protein-2 plasmid DNA with chemokine CXCL12 creates an additive effect on bone formation onset and volume

    NARCIS (Netherlands)

    Wegman, F.; Poldervaart, M. T.; van der Helm, Y. J.; Oner, F. C.; Dhert, W. J.; Alblas, J.

    2015-01-01

    Bone morphogenetic protein-2 (BMP-2) gene delivery has shown to induce bone formation in vivo in cell-based tissue engineering. In addition, the chemoattractant stromal cell-derived factor-1α (SDF-1α, also known as CXCL12) is known to recruit multipotent stromal cells towards its release site where

  11. Production and characterization of chitosan/gelatin/β-TCP scaffolds for improved bone tissue regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Serra, I.R.; Fradique, R.; Vallejo, M.C.S.; Correia, T.R.; Miguel, S.P.; Correia, I.J., E-mail: icorreia@ubi.pt

    2015-10-01

    Recently, bone tissue engineering emerged as a viable therapeutic alternative, comprising bone implants and new personalized scaffolds to be used in bone replacement and regeneration. In this study, biocompatible scaffolds were produced by freeze-drying, using different formulations (chitosan, chitosan/gelatin, chitosan/β-TCP and chitosan/gelatin/β-TCP) to be used as temporary templates during bone tissue regeneration. Sample characterization was performed through attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray diffraction and energy dispersive spectroscopy analysis. Mechanical characterization and porosity analysis were performed through uniaxial compression test and liquid displacement method, respectively. In vitro studies were also done to evaluate the biomineralization activity and the cytotoxic profile of the scaffolds. Scanning electron and confocal microscopy analysis were used to study cell adhesion and proliferation at the scaffold surface and within their structure. Moreover, the antibacterial activity of the scaffolds was also evaluated through the agar diffusion method. Overall, the results obtained revealed that the produced scaffolds are bioactive and biocompatible, allow cell internalization and show antimicrobial activity against Staphylococcus aureus. Such, make these 3D structures as potential candidates for being used on the bone tissue regeneration, since they promote cell adhesion and proliferation and also prevent biofilm development at their surfaces, which is usually the main cause of implant failure. - Highlights: • Production of 3D scaffolds composed by chitosan/gelatin/β-TCP by freeze-drying for bone regeneration • Physicochemical characterization of the bone substitutes by SEM, FTIR, XRD and EDS • Evaluation of the cytotoxic profile and antibacterial activity of the 3D structures through in vitro assays.

  12. Assessment of regional bone tissue perfusion in rats using fluorescent microspheres

    Directory of Open Access Journals (Sweden)

    Mohammad W. Aref

    2017-06-01

    Full Text Available Disturbances in bone blood flow have been shown to have deleterious effects on bone properties yet there remain many unanswered questions about skeletal perfusion in health and disease, partially due to the complexity of measurement methodologies. The goal of this study was use fluorescent microspheres in rats to assess regional bone perfusion by adapting mouse-specific fluorescent microsphere protocol. Ten fifteen-week old Sprague Dawley rats were injected with fluorescent microspheres either via cardiac injection (n = 5 or via tail vein injection (n = 5. Femora and tibiae were harvested and processed to determine tissue fluorescence density (TFD which is proportional to the number of spheres trapped in the tissue capillaries. Right and left total femoral TFD (2.77 ± 0.38 and 2.70 ± 0.24, respectively and right and left tibial TFD (1.11 ± 0.26 and 1.08 ± 0.34, respectively displayed bilateral symmetry in flow when assessed in cardiac injected animals. Partitioning of the bone perfusion into three segments along the length of the bone showed the distal femur and proximal tibia received the greatest amount of perfusion within their respective bones. Tail vein injection resulted in unacceptably low TFD levels in the tibia from 4 of the 5 animals. In conclusion this report demonstrates the viability of cardiac injection of fluorescent microspheres to assess bone tissue perfusion in rats.

  13. Combining technologies to create bioactive hybrid scaffolds for bone tissue engineering

    NARCIS (Netherlands)

    Nandakumar, A.; Barradas, A.M.C.; Boer, de J.; Moroni, L.; Blitterswijk, van C.A.; Habibovic, P.

    2013-01-01

    Combining technologies to engineer scaffolds that can offer physical and chemical cues to cells is an attractive approach in tissue engineering and regenerative medicine. In this study, we have fabricated polymer-ceramic hybrid scaffolds for bone regeneration by combining rapid prototyping (RP), ele

  14. Porous crosslinked poly(e-caprolactone fumarate)/nanohydroxyapatite composites for bone tissue engineering

    NARCIS (Netherlands)

    Farokhi, M.; Sharifi, S.; Shafieyan, Y.; Bagher, Z.; Mottaghitalab, F.; Hatampoor, A.; Imani, M.; Shokrgozar, M. A.

    2012-01-01

    Porous nanocomposites based on poly(e-caprolactone fumarate) (PCLF) resin matrix; N-vinyl pyrrolidone (NVP) as a reactive diluents and nanohydroxyapatite (nHA) filler were developed for bone tissue engineering applications. Nanocomposite scaffolds with three different contents of nHA [5, 10, and 20

  15. Raloxifene microsphere-embedded collagen/chitosan/β-tricalcium phosphate scaffold for effective bone tissue engineering.

    Science.gov (United States)

    Zhang, Ming-Lei; Cheng, Ji; Xiao, Ye-Chen; Yin, Ruo-Feng; Feng, Xu

    2017-02-25

    Engineering novel scaffolds that can mimic the functional extracellular matrix (ECM) would be a great achievement in bone tissue engineering. This paper reports the fabrication of novel collagen/chitosan/β-tricalcium phosphate (CCTP) based tissue engineering scaffold. In order to improve the regeneration ability of scaffold, we have embedded raloxifene (RLX)-loaded PLGA microsphere in the CCTP scaffold. The average pore of scaffold was in the range of 150-200μm with ideal mechanical strength and swelling/degradation characteristics. The release rate of RLX from the microsphere (MS) embedded scaffold was gradual and controlled. Also a significantly enhanced cell proliferation was observed in RLX-MS exposed cell group suggesting that microsphere/scaffold could be an ideal biomaterial for bone tissue engineering. Specifically, RLX-MS showed a significantly higher Alizarin red staining indicating the higher mineralization capacity of this group. Furthermore, a high alkaline phosphatase (ALP) activity for RLX-MS exposed group after 15days incubation indicates the bone regeneration capacity of MC3T3-E1 cells. Overall, present study showed that RLX-loaded microsphere embedded scaffold has the promising potential for bone tissue engineering applications. Copyright © 2016. Published by Elsevier B.V.

  16. Concise review: cell-based strategies in bone tissue engineering and regenerative medicine

    NARCIS (Netherlands)

    Ma, J.; Both, S.K.; Yang, F.; Cui, F.Z.; Pan, J.; Meijer, G.J.; Jansen, J.A.; Beucken, J.J.J.P van den

    2014-01-01

    Cellular strategies play an important role in bone tissue engineering and regenerative medicine (BTE/RM). Variability in cell culture procedures (e.g., cell types, cell isolation and expansion, cell seeding methods, and preculture conditions before in vivo implantation) may influence experimental ou

  17. In vitro osteoinductive potential of porous monetite for bone tissue engineering.

    Science.gov (United States)

    Idowu, Bernadine; Cama, Giuseppe; Deb, Sanjukta; Di Silvio, Lucy

    2014-01-01

    Tissue engineering-based bone grafts are emerging as a viable alternative treatment modality to repair and regenerate tissues damaged as a result of disease or injury. The choice of the biomaterial component is a critical determinant of the success of the graft or scaffold; essentially, it must induce and allow native tissue integration, and most importantly mimic the hierarchical structure of the native bone. Calcium phosphate bioceramics are widely used in orthopaedics and dentistry applications due to their similarity to bone mineral and their ability to induce a favourable biological response. One such material is monetite, which is biocompatible, osteoconductive and has the ability to be resorbed under physiological conditions. The osteoinductive properties of monetite in vivo are known; however, little is known of the direct effect on osteoinduction of human mesenchymal stem cells in vitro. In this study, we evaluated the potential of monetite to induce and sustain human mesenchymal stem cells towards osteogenic differentiation. Human mesenchymal stem cells were seeded on the monetite scaffold in the absence of differentiating factors for up to 28 days. The gene expression profile of bone-specific markers in cells on monetite scaffold was compared to the control material hydroxyapatite. At day 14, we observed a marked increase in alkaline phosphatase, osteocalcin and osteonectin expressions. This study provides evidence of a suitable material that has potential properties to be used as a tissue engineering scaffold.

  18. In vitro osteoinductive potential of porous monetite for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Bernadine Idowu

    2014-05-01

    Full Text Available Tissue engineering–based bone grafts are emerging as a viable alternative treatment modality to repair and regenerate tissues damaged as a result of disease or injury. The choice of the biomaterial component is a critical determinant of the success of the graft or scaffold; essentially, it must induce and allow native tissue integration, and most importantly mimic the hierarchical structure of the native bone. Calcium phosphate bioceramics are widely used in orthopaedics and dentistry applications due to their similarity to bone mineral and their ability to induce a favourable biological response. One such material is monetite, which is biocompatible, osteoconductive and has the ability to be resorbed under physiological conditions. The osteoinductive properties of monetite in vivo are known; however, little is known of the direct effect on osteoinduction of human mesenchymal stem cells in vitro. In this study, we evaluated the potential of monetite to induce and sustain human mesenchymal stem cells towards osteogenic differentiation. Human mesenchymal stem cells were seeded on the monetite scaffold in the absence of differentiating factors for up to 28 days. The gene expression profile of bone-specific markers in cells on monetite scaffold was compared to the control material hydroxyapatite. At day 14, we observed a marked increase in alkaline phosphatase, osteocalcin and osteonectin expressions. This study provides evidence of a suitable material that has potential properties to be used as a tissue engineering scaffold.

  19. Osteogenic cells on bio-inspired materials for bone tissue engineering.

    Science.gov (United States)

    Vagaská, B; Bacáková, L; Filová, E; Balík, K

    2010-01-01

    This article reviews the development of artificial bone substitutes from their older single-phase forms to novel multi-phase composites, mimicking the composition and architecture of natural bone tissue. The new generation of bone implants should be bioactive, i.e. they should induce the desired cellular responses, leading to integration of the material into the natural tissue and stimulating self-healing processes. Therefore, the first part of the review explains the common principles of the cell-material interaction and summarizes the strategies how to improve the biocompatibility and bioactivity of the materials by modifying the physico-chemical properties of the material surface, such as surface chemistry, wettability, electrical charge, rigidity, microroughness and especially nanoroughness. The latter has been shown to stimulate preferentially the growth of osteoblasts in comparison with other competitive cell types, such as fibroblasts, which could prevent fibrous tissue formation upon implantation. The second more specialized part of the review deals with materials suitable for bone contact and substitution, particularly novel polymer-based composites reinforced with fibres or inorganic particles and containing bioactive components, such as crystals of hydroxyapatite or other calcium phosphates, synthetic ligands for cell adhesion receptors or growth factors. Moreover, if they are degradable, they can be gradually replaced with a regenerating tissue.

  20. Pre-clinical validation of bone tissue engineering using mesenchymal stromal cells

    NARCIS (Netherlands)

    Ganguly, Anindita

    2012-01-01

    The incidence of bone and joint related disorders such as osteoporosis, arthritis, as well as other diseases such as obesity, diabetes, and cancer, which can cause injury to orthopedic tissues and affect the health and capability of the human skeleton is on the rise. In such situations, the body’s

  1. Adipose mesenchymal stem cells in the field of bone tissue engineering.

    Science.gov (United States)

    Romagnoli, Cecilia; Brandi, Maria Luisa

    2014-04-26

    Bone tissue engineering represents one of the most challenging emergent fields for scientists and clinicians. Current failures of autografts and allografts in many pathological conditions have prompted researchers to find new biomaterials able to promote bone repair or regeneration with specific characteristics of biocompatibility, biodegradability and osteoinductivity. Recent advancements for tissue regeneration in bone defects have occurred by following the diamond concept and combining the use of growth factors and mesenchymal stem cells (MSCs). In particular, a more abundant and easily accessible source of MSCs was recently discovered in adipose tissue. These adipose stem cells (ASCs) can be obtained in large quantities with little donor site morbidity or patient discomfort, in contrast to the invasive and painful isolation of bone marrow MSCs. The osteogenic potential of ASCs on scaffolds has been examined in cell cultures and animal models, with only a few cases reporting the use of ASCs for successful reconstruction or accelerated healing of defects of the skull and jaw in patients. Although these reports extend our limited knowledge concerning the use of ASCs for osseous tissue repair and regeneration, the lack of standardization in applied techniques makes the comparison between studies difficult. Additional clinical trials are needed to assess ASC therapy and address potential ethical and safety concerns, which must be resolved to permit application in regenerative medicine.

  2. [Use of mesenchymal stem cells for reparative processes activation in bone jaw tissue in experimental conditions].

    Science.gov (United States)

    Volozhin, A I; Vasil'ev, A Iu; Malyginov, N N; Bulanova, I M; Grigor''ian, A S; Kiseleva, E V; Cherniaev, S E; Tarasenko, I V

    2010-01-01

    In experiment on 12 Chinchilla rabbits dynamics of reparative regeneration was studied at the terms 2 and 4 months. Bone defect in mandible corner was closed by osteoplastic material Gapkol which was covered from inside by allogenic or autologic stem cells received from rabbit adipose tissue. The results of the ray tracing methods of study were verified by SEM and histological methods.

  3. Biological evaluation of porous aliphatic polyurethane/hydroxyapatite composite scaffolds for bone tissue engineering.

    NARCIS (Netherlands)

    Yang, W; Both, S.K.; Zuo, Y.; Birgani, Z.T.; Habibovic, P.; Li, Y.; Jansen, J.A.; Yang, F.

    2015-01-01

    Biomaterial scaffolds meant to function as supporting structures to osteogenic cells play a pivotal role in bone tissue engineering. Recently, we synthesized an aliphatic polyurethane (PU) scaffold via a foaming method using non-toxic components. Through this procedure a uniform interconnected porou

  4. Radioisotopic methods for the study of bone sarcoma and soft tissue neoplasms

    Energy Technology Data Exchange (ETDEWEB)

    Gongora, R.

    1988-01-01

    Radioisotopic methods are widely applied to investigations of bone sarcoma and soft tissue neoplasms. We have at our disposal molecules with osseous, tumoral or vascular tropism. Their use, as single agents or combination, is helpful in positive and differential diagnosis and provides nosological informations. They are also useful in treatment monitoring and in long-term follow-up.

  5. Tissue-engineered mandibular bone reconstruction for continuity defects: a systematic approach to the literature

    NARCIS (Netherlands)

    Chanchareonsook, N.; Junker, R.; Jongpaiboonkit, L.; Jansen, J.A.

    2014-01-01

    Background: Despite significant surgical advances over the last decades, segmental mandibular bone repair remains a challenge. In light of this, tissue engineering might offer a next step in the evolution of mandibular reconstruction. Purpose: The purpose of the present report was to (1) systematica

  6. Micronutrients-incorporated calcium phosphate particles with protective effect on osteoporotic bone tissue.

    Science.gov (United States)

    Chen, X; Zhang, L; Yang, X; Li, Z; Sun, X; Lin, M; Yang, G; Gou, Z

    2013-01-01

    Supplementation of individual micronutrient is inadequate for maintaining bone function because single micronutrient can not contribute significantly a positive remodeling balance. We developed the highly integrated, stably dietary multi-micronutrients with good bioavailability and low adverse effect on the improvement of bone consolidation in osteoporosis. The trace element-codoped calcium phosphate (teCaP) particles were prepared in the modified body fluid and carefully evaluated. Rats, aged 3 months, were ovariectomized and when 6 month intervened with the conditioned, low, moderate, and high teCaP diets. The teCaP particles showed highly dissolvable in stomach juice-mimicing acidic solutions. Three months after intervention, the body weight increase showed remarkable differences among the low teCaP diet (~52 g), moderate teCaP diet (~34 g) and high teCaP diet (~23 g) group. In particular, the intake of moderate teCaP greatly improved the retention of trace elements in femural bone for better protection against the skeletal weakening, and resulted in a significant increase of bone mineral density (104.06%) in comparison with the conventional high calcium plus vitamin D3 diet (Control group). These investigations improve our understanding of micronutrient retention on bone consolidation in osteoporotic bone tissue, and also provide new mild wet-chemical approach to prepare potent nutritionally effective edible complements to synergistically relieve bone degeneration and prevent osteoporosis.

  7. Nerve Tissue Prefabrication Inside the Rat Femoral Bone: Does It Work?

    Science.gov (United States)

    Ozbek, Zuhtu; Kocman, Atacan Emre; Ozatik, Orhan; Soztutar, Erdem; Ozkara, Emre; Kose, Aydan; Arslantas, Ali; Cetin, Cengiz

    2017-01-01

    To investigate whether nerve regeneration can be induced in the tubular bone between distal and proximal cut nerve ends. Twenty adult Wistar rats were used for the study. Rats were divided into three groups; femoral bone conduit group, nerve transection group, sham group. The sciatic nerve was surgically cut and from both ends inserted into the adjacent femoral bone tunnel in the femoral bone conduit group. The sciatic nerve was cut transversely in the nerve transection group. In the Sham group, only sciatic nerve exploration was performed, without a nerve cut. The groups were evaluated functionally and morphologically. All results showed that axonal growth existed through the osseous canal. To the best of our knowledge, this is the first study to evaluate neural regeneration inside the bone. We can speculate that the bone marrow provides a convenient microenvironment for peripheral nerve regeneration. In addition to prefabricating peripheral nerves, this novel model may help to establish further strategies for engineering of other tissues in the bone marrow.

  8. Osteoinductive peptide-functionalized nanofibers with highly ordered structure as biomimetic scaffolds for bone tissue engineering

    Science.gov (United States)

    Gao, Xiang; Zhang, Xiaohong; Song, Jinlin; Xu, Xiao; Xu, Anxiu; Wang, Mengke; Xie, Bingwu; Huang, Enyi; Deng, Feng; Wei, Shicheng

    2015-01-01

    The construction of functional biomimetic scaffolds that recapitulate the topographical and biochemical features of bone tissue extracellular matrix is now of topical interest in bone tissue engineering. In this study, a novel surface-functionalized electrospun polycaprolactone (PCL) nanofiber scaffold with highly ordered structure was developed to simulate the critical features of native bone tissue via a single step of catechol chemistry. Specially, under slightly alkaline aqueous solution, polydopamine (pDA) was coated on the surface of aligned PCL nanofibers after electrospinning, followed by covalent immobilization of bone morphogenetic protein-7-derived peptides onto the pDA-coated nanofiber surface. Contact angle measurement, Raman spectroscopy, and X-ray photoelectron spectroscopy confirmed the presence of pDA and peptides on PCL nanofiber surface. Our results demonstrated that surface modification with osteoinductive peptides could improve cytocompatibility of nanofibers in terms of cell adhesion, spreading, and proliferation. Most importantly, Alizarin Red S staining, quantitative real-time polymerase chain reaction, immunostaining, and Western blot revealed that human mesenchymal stem cells cultured on aligned nanofibers with osteoinductive peptides exhibited enhanced osteogenic differentiation potential than cells on randomly oriented nanofibers. Furthermore, the aligned nanofibers with osteoinductive peptides could direct osteogenic differentiation of human mesenchymal stem cells even in the absence of osteoinducting factors, suggesting superior osteogenic efficacy of biomimetic design that combines the advantages of osteoinductive peptide signal and highly ordered nanofibers on cell fate decision. The presented peptide-decorated bone-mimic nanofiber scaffolds hold a promising potential in the context of bone tissue engineering. PMID:26604759

  9. Bioactive polymeric–ceramic hybrid 3D scaffold for application in bone tissue regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Torres, A.L.; Gaspar, V.M.; Serra, I.R.; Diogo, G.S.; Fradique, R. [CICS-UBI — Health Sciences Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã (Portugal); Silva, A.P. [CAST-UBI — Centre for Aerospace Science and Technologies, University of Beira Interior, Calçada Fonte do Lameiro, 6201-001 Covilhã (Portugal); Correia, I.J., E-mail: icorreia@ubi.pt [CICS-UBI — Health Sciences Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã (Portugal)

    2013-10-01

    The regeneration of large bone defects remains a challenging scenario from a therapeutic point of view. In fact, the currently available bone substitutes are often limited by poor tissue integration and severe host inflammatory responses, which eventually lead to surgical removal. In an attempt to address these issues, herein we evaluated the importance of alginate incorporation in the production of improved and tunable β-tricalcium phosphate (β-TCP) and hydroxyapatite (HA) three-dimensional (3D) porous scaffolds to be used as temporary templates for bone regeneration. Different bioceramic combinations were tested in order to investigate optimal scaffold architectures. Additionally, 3D β-TCP/HA vacuum-coated with alginate, presented improved compressive strength, fracture toughness and Young's modulus, to values similar to those of native bone. The hybrid 3D polymeric–bioceramic scaffolds also supported osteoblast adhesion, maturation and proliferation, as demonstrated by fluorescence microscopy. To the best of our knowledge this is the first time that a 3D scaffold produced with this combination of biomaterials is described. Altogether, our results emphasize that this hybrid scaffold presents promising characteristics for its future application in bone regeneration. - Graphical abstract: B-TCP:HA–alginate hybrid 3D porous scaffolds for application in bone regeneration. - Highlights: • The produced hybrid 3D scaffolds are prone to be applied in bone tissue engineering. • Alginate coated 3D scaffolds present high mechanical and biological properties. • In vitro assays for evaluation of human osteoblast cell attachment in the presence of the scaffolds • The hybrid 3D scaffolds present suitable mechanical and biological properties for use in bone regenerative medicine.

  10. Influence of PRF in the healing of bone and gingival tissues. Clinical and histological evaluations.

    Science.gov (United States)

    Marrelli, M; Tatullo, M

    2013-07-01

    The healing of bone tissues around dental implants is based primarily on a correct osseointegration. Typically, implants stability and peri-implant tissues health are anticipated to decrease during the early weeks of healing; this is followed by an increase in stability. The aim of the present study is to assess a predictable protocol in order to increase the peri-implant tissues maintenance around post-extractive dental implants, thanks to the use of Platelet-Rich Fibrin (PRF) membrane. This is a retrospective observational study of 127 tapered dental implants placed in the immediate post-extraction sites of maxillary bone of 59 patients. Atraumatic dental extraction and flapless implant surgery was performed in all reported cases. The cortical bone position relative to the implant reference point was evaluated at implant placement and 10 to 24 months following implantology. The gap between bone tissue and the implant surface was measured up to a maximum of 3 mm. After placing implants we have filled the surgical site with a PRF gel, so as to fill the gap between bone tissue and the implant surface, and then we have covered the surgical site with a PRF membrane, so as to coat the gap between the alveolar crest and the implant. In all cases, we observed the complete covering of the dental implants, with newly formed soft tissue of variable thickness between 1 and 3 mm. Cortical bone adaptation from the time of implant placement up to 30 months following prosthetic restoration ranged from 0.4 mm to 1.7 mm. Our study showed a series of successful rehabilitations, with post-extraction implantology technique, in 99.8 percent of cases, despite the success rates in the medium and long-term post-extraction implantology reported in the literature range between 92.7 percent and 98.0 percent. Long-term maintenance of crestal bone and the rapid healing of soft tissue dimension with maintenance of peri-implant papilla were observed as outcomes after post-extractive implants

  11. Effect of allogenic freeze-dried demineralized bone matrix on guided tissue regeneration in dogs.

    Science.gov (United States)

    Caplanis, N; Lee, M B; Zimmerman, G J; Selvig, K A; Wikesjö, U M

    1998-08-01

    This randomized, split-mouth study was designed to evaluate the adjunctive effect of allogenic, freeze-dried, demineralized bone matrix (DBM) to guided tissue regeneration (GTR). Contralateral fenestration defects (6 x 4 mm) were created 6 mm apical to the buccal alveolar crest on maxillary canine teeth in 6 beagle dogs. DBM was implanted into one randomly selected fenestration defect. Expanded polytetrafluoroethylene (ePTFE) membranes were used to provide bilateral GTR. Tissue blocks including defects with overlying membranes and soft tissues were harvested following a four-week healing interval and prepared for histometric analysis. Differences between GTR+DBM and GTR defects were evaluated using a paired t-test (N = 6). DBM was discernible in all GTR+DBM defects with limited, if any, evidence of bone metabolic activity. Rather, the DBM particles appeared solidified within a dense connective tissue matrix, often in close contact to the instrumented root. There were no statistically significant differences between the GTR+DBM versus the GTR condition for any histometric parameter examined. Fenestration defect height averaged 3.7+/-0.3 and 3.9+/-0.3 mm, total bone regeneration 0.8+/-0.6 and 1.5+/-0.8 mm, and total cementum regeneration 2.0+/-1.3 and 1.6+/-1.7 mm for GTR+DBM and GTR defects, respectively. The histologic and histometric observations, in concert, suggest that allogenic freeze-dried DBM has no adjunctive effect to GTR in periodontal fenestration defects over a four-week healing interval. The critical findings were 1) the DBM particles remained, embedded in dense connective tissue without evidence of bone metabolic activity; and 2) limited and similar amounts of bone and cementum regeneration were observed for both the GTR+DBM and GTR defects.

  12. Value and limits of μ-CT for nondemineralized bone tissue processing.

    Science.gov (United States)

    Draenert, Miriam Esther; Draenert, Alice Irène; Forriol, Francisco; Cerler, Michael; Kunzelmann, Karl-Heinz; Hickel, Reinhard; Draenert, Klaus

    2012-04-01

    An experimental approach was performed on 20 giant rabbits to establish the possibilities and limitations of μ-CT for routine processing of nondemineralized bone tissue. Hydroxyapatite (HA) or β-tricalciumphosphate (β-TCP) bead implants or a melange of both, microchambered and solid, were implanted into a standardized and precise defect in the patellar groove. The bone-healing phase was chosen for the histology considering 1 or 2 days, and 2, 3, and 6 weeks. Normal X-ray and μ-CT were applied on all specimens; five specimens in the 6-week stage were additionally processed according to the full range of conventional nondemineralized bone processing methods. μ-CT increased the possibilities of nondemineralized histology with respect to bone morphometry and a complete sequence of sections, thus providing a complete analysis of the bone response. μ-CT was limited in differentiating bone quality, cell analyses, and mineralization stages. The investigation based on normal X-rays is limited to defining integration and excluding the fibrous and bony encapsulation of loose implants. μ-CT allows a 3D evaluation of newly formed bone which is clearly marked against the ceramic implant. It does not allow, however, for the differentiation between woven and lamellar bone, the presentation of the canalicular lacunar system, or on the cell level, revealing canaliculi or details of the mineralization process which can be documented by high-resolution microradiography. Titer dynamics of bone formation remains the domain of polychromatic sequential labeling. The complete sequence of μ-CT slices enhances the possibilities for routine histology, tremendously allowing to the focus on detail histology to topographically well-defined cuts, thus providing more precise conclusions which take into consideration the whole implant.

  13. The relationship between the mechanical anisotropy of human cortical bone tissue and its microstructure

    Science.gov (United States)

    Espinoza Orias, Alejandro A.

    Orthopedics research has made significant advances in the areas of biomechanics, bone implants and bone substitute materials. However, to date there is no definitive model to explain the structure-property relationships in bone as a material to enable better implant designs or to develop a true biomechanical analog of bone. The objective of this investigation was to establish a relationship between the elastic anisotropy of cortical bone tissue and its microstructure. Ultrasonic wave propagation was used to measure stiffness coefficients for specimens sectioned along the length of a human femur. The elastic constants were orthotropic and varied with anatomical location. Stiffness coefficients were generally largest at the midshaft and stiffness anisotropy ratios were largest at the distal and proximal ends. These tests were run on four additional human femurs to assess the influence of phenotypic variation, and in most cases, it was found that phenotypes do not exert a significant effect. Stiffness coefficients were shown to be correlated as a power law relation to apparent density, but anisotropy ratios were not. Texture analysis was performed on selected samples to measure the orientation distribution of the bone mineral crystals. Inverse pole figures showed that bone mineral crystals had a preferred crystallographic orientation, coincident with the long axis of the femur, which is its principal loading direction. The degree of preferred orientation was represented in Multiples of a Random Distribution (MRD), and correlated to the anisotropy ratios. Variation in elastic anisotropy was shown to be primarily due to the bone mineral orientation. The results found in this work can be used to incorporate anisotropy into structural analysis for bone as a material.

  14. Mathematical model of diffusion-limited gas bubble dynamics in unstirred tissue with finite volume.

    Science.gov (United States)

    Srinivasan, R Srini; Gerth, Wayne A; Powell, Michael R

    2002-02-01

    Models of gas bubble dynamics for studying decompression sickness have been developed by considering the bubble to be immersed in an extravascular tissue with diffusion-limited gas exchange between the bubble and the surrounding unstirred tissue. In previous versions of this two-region model, the tissue volume must be theoretically infinite, which renders the model inapplicable to analysis of bubble growth in a finite-sized tissue. We herein present a new two-region model that is applicable to problems involving finite tissue volumes. By introducing radial deviations to gas tension in the diffusion region surrounding the bubble, the concentration gradient can be zero at a finite distance from the bubble, thus limiting the tissue volume that participates in bubble-tissue gas exchange. It is shown that these deviations account for the effects of heterogeneous perfusion on gas bubble dynamics, and are required for the tissue volume to be finite. The bubble growth results from a difference between the bubble gas pressure and an average gas tension in the surrounding diffusion region that explicitly depends on gas uptake and release by the bubble. For any given decompression, the diffusion region volume must stay above a certain minimum in order to sustain bubble growth.

  15. Perkembangan Terkini Membran Guided Tissue Regeneration/Guided Bone Regeneration sebagai Terapi Regenerasi Jaringan Periodontal

    Directory of Open Access Journals (Sweden)

    Cindy Cahaya

    2015-06-01

    kombinasi prosedur-prosedur di atas, termasuk prosedur bedah restoratif yang berhubungan dengan rehabilitasi oral dengan penempatan dental implan. Pada tingkat selular, regenerasi periodontal adalah proses kompleks yang membutuhkan proliferasi yang terorganisasi, differensiasi dan pengembangan berbagai tipe sel untuk membentuk perlekatan periodontal. Rasionalisasi penggunaan guided tissue regeneration sebagai membran pembatas adalah menahan epitel dan gingiva jaringan pendukung, sebagai barrier membrane mempertahankan ruang dan gigi serta menstabilkan bekuan darah. Pada makalah ini akan dibahas sekilas mengenai 1. Proses penyembuhan terapi periodontal meliputi regenerasi, repair ataupun pembentukan perlekatan baru. 2. Periodontal spesific tissue engineering. 3. Berbagai jenis membran/guided tissue regeneration yang beredar di pasaran dengan keuntungan dan kerugian sekaligus karakteristik masing-masing membran. 4. Perkembangan membran terbaru sebagai terapi regenerasi penyakit periodontal. Tujuan penulisan untuk memberi gambaran masa depan mengenai terapi regenerasi yang menjanjikan sebagai perkembangan terapi penyakit periodontal.   Latest Development of Guided Tissue Regeneration and Guided Bone Regeneration Membrane as Regenerative Therapy on Periodontal Tissue. Periodontitis is a patological state which influences the integrity of periodontal system that could lead to the destruction of the periodontal tissue and end up with tooth loss. Currently, there are so many researches and efforts to regenerate periodontal tissue, not only to stop the process of the disease but also to reconstruct the periodontal tissue. Periodontal regenerative therapy aims at directing the growth of new bone, cementum and periodontal ligament on the affected teeth. Regenerative procedures consist of soft tissue graft, bone graft, roots biomodification, guided tissue regeneration and combination of the procedures, including restorative surgical procedure that is

  16. NPY neuron-specific Y2 receptors regulate adipose tissue and trabecular bone but not cortical bone homeostasis in mice.

    Directory of Open Access Journals (Sweden)

    Yan-Chuan Shi

    Full Text Available BACKGROUND: Y2 receptor signalling is known to be important in neuropeptide Y (NPY-mediated effects on energy homeostasis and bone physiology. Y2 receptors are located post-synaptically as well as acting as auto receptors on NPY-expressing neurons, and the different roles of these two populations of Y2 receptors in the regulation of energy homeostasis and body composition are unclear. METHODOLOGY/PRINCIPAL FINDINGS: We thus generated two conditional knockout mouse models, Y2(lox/lox and NPYCre/+;Y2(lox/lox, in which Y2 receptors can be selectively ablated either in the hypothalamus or specifically in hypothalamic NPY-producing neurons of adult mice. Specific deletion of hypothalamic Y2 receptors increases food intake and body weight compared to controls. Importantly, specific ablation of hypothalamic Y2 receptors on NPY-containing neurons results in a significantly greater adiposity in female but not male mice, accompanied by increased hepatic triglyceride levels, decreased expression of liver carnitine palmitoyltransferase (CPT1 and increased expression of muscle phosphorylated acetyl-CoA carboxylase (ACC. While food intake, body weight, femur length, bone mineral content, density and cortical bone volume and thickness are not significantly altered, trabecular bone volume and number were significantly increased by hypothalamic Y2 deletion on NPY-expressing neurons. Interestingly, in situ hybridisation reveals increased NPY and decreased proopiomelanocortin (POMC mRNA expression in the arcuate nucleus of mice with hypothalamus-specific deletion of Y2 receptors in NPY neurons, consistent with a negative feedback mechanism between NPY expression and Y2 receptors on NPY-ergic neurons. CONCLUSIONS/SIGNIFICANCE: Taken together these data demonstrate the anti-obesogenic role of Y2 receptors in the brain, notably on NPY-ergic neurons, possibly via inhibition of NPY neurons and concomitant stimulation of POMC-expressing neurons in the arcuate nucleus of

  17. Design and optimization of a tissue-engineered bone graft substitute

    Science.gov (United States)

    Shimko, Daniel Andrew

    2004-12-01

    In 2000, 3.1 million surgical procedures on the musculoskeletal system were reported in the United States. For many of these cases, bone grafting was essential for successful fracture stabilization. Current techniques use intact bone obtained either from the patient (autograft) or a cadaver (allograft) to repair large defects, however, neither source is optimal. Allografts suffer integration problems, and for autografts, the tissue supply is limited. Because of these shortcomings, and the high demand for graft tissues, alternatives are being explored. To successfully engineer a bone graft replacement, one must employ a three pronged research approach, addressing (1) the cells that will inhabit the new tissue, (2) the culture environment that these cells will be exposed to, and (3) the scaffold in which these cells will reside. The work herein examines each of these three aspects in great detail. Both adult and embryonic stem cells (ESCs) were considered for the tissue-engineered bone graft. Both exhibited desirable qualities, however, neither were optimal in all categories examined. In the end, the possibility of teratoma formation and ethical issues surrounding ESCs, made the use of adult marrow-derived stem cells in the remaining experiments obligatory. In subsequent experiments, the adult stem cells' ability to form bone was optimized. Basic fibroblast growth factor, fetal bovine serum, and extracellular calcium supplementation studies were all performed. Ultimately, adult stem cells cultured in alpha-MEM supplemented with 10% fetal bovine serum, 10mM beta-glycerophosphate, 10nM dexamethasone, 50mug/ml ascorbic acid, 1%(v/v) antibiotic/antimycotic, and 10.4mM CaCl2 performed the best, producing nearly four times more mineral than any other medium formulation. Several scaffolds were then investigated including those fabricated from poly(alpha-hydroxy esters), tantalum, and poly-methylmethacrylate. In the final study, the most appealing cell type, medium

  18. Poly(dopamine) coating to biodegradable polymers for bone tissue engineering.

    Science.gov (United States)

    Tsai, Wei-Bor; Chen, Wen-Tung; Chien, Hsiu-Wen; Kuo, Wei-Hsuan; Wang, Meng-Jiy

    2014-02-01

    In this study, a technique based on poly(dopamine) deposition to promote cell adhesion was investigated for the application in bone tissue engineering. The adhesion and proliferation of rat osteoblasts were evaluated on poly(dopamine)-coated biodegradable polymer films, such as polycaprolactone, poly(l-lactide) and poly(lactic-co-glycolic acid), which are commonly used biodegradable polymers in tissue engineering. Cell adhesion was significantly increased to a plateau by merely 15 s of dopamine incubation, 2.2-4.0-folds of increase compared to the corresponding untreated substrates. Cell proliferation was also greatly enhanced by poly(dopamine) deposition, indicated by shortened cell doubling time. Mineralization was also increased on the poly(dopamine)-deposited surfaces. The potential of poly(dopamine) deposition in bone tissue engineering is demonstrated in this study.

  19. A proteomic study of protein variation between osteopenic and age-matched control bone tissue.

    Science.gov (United States)

    Chaput, Christopher D; Dangott, Lawrence J; Rahm, Mark D; Hitt, Kirby D; Stewart, Donald S; Wayne Sampson, H

    2012-05-01

    The focus of this study was to identify changes in protein expression within the bone tissue environment between osteopenic and control bone tissue of human femoral neck patients with osteoarthritis. Femoral necks were compared from osteopenic patients and age-matched controls. A new method of bone protein extraction was developed to provide a swift, clear view of the bone proteome. Relative changes in protein expression between control and osteopenic samples were quantified using difference gel electrophoresis (DIGE) technology after affinity chromatographic depletion of albumin and IgG. The proteins that were determined to be differentially expressed were identified using standard liquid chromatography mass spectrometry (LC/MS/MS) and database searching techniques. In order to rule out blood contamination, blood from age-matched osteoporotic, osteopenic and controls were analyzed in a similar manner. Image analysis of the DIGE gels indicated that 145 spots in the osteopenic bone samples changed at least ± 1.5-fold from the control samples (P proteins were identified by LC/MS/MS. Of the proteins that increased in the osteopenic femurs, two were especially significant: carbonic anhydrase I and phosphoglycerate kinase 1. Apolipoprotein A-I was the most prominent protein that significantly decreased in the osteopenic femurs. The blood samples revealed no significant differences between groups for any of these proteins. In conclusion, carbonic anhydrase I, phosphoglycerate kinase 1 and apolipoprotein A-I appeared to be the most significant variations of proteins in patients with osteopenia and osteoarthritis.

  20. The evolution of simulation techniques for dynamic bone tissue engineering in bioreactors.

    Science.gov (United States)

    Vetsch, Jolanda Rita; Müller, Ralph; Hofmann, Sandra

    2015-08-01

    Bone tissue engineering aims to overcome the drawbacks of current bone regeneration techniques in orthopaedics. Bioreactors are widely used in the field of bone tissue engineering, as they help support efficient nutrition of cultured cells with the possible combination of applying mechanical stimuli. Beneficial influencing parameters of in vitro cultures are difficult to find and are mostly determined by trial and error, which is associated with significant time and money spent. Mathematical simulations can support the finding of optimal parameters. Simulations have evolved over the last 20 years from simple analytical models to complex and detailed computational models. They allow researchers to simulate the mechanical as well as the biological environment experienced by cells seeded on scaffolds in a bioreactor. Based on the simulation results, it is possible to give recommendations about specific parameters for bone bioreactor cultures, such as scaffold geometries, scaffold mechanical properties, the level of applied mechanical loading or nutrient concentrations. This article reviews the evolution in simulating various aspects of dynamic bone culture in bioreactors and reveals future research directions.

  1. Morphological Aspect and iNOS and Bax Expression Modification in Bone Tissue Around Dental Implants Positioned Using Piezoelectric Bone Surgery Versus Conventional Drill Technique.

    Science.gov (United States)

    Zizzari, Vincenzo Luca; Berardi, Davide; Congedi, Francesca; Tumedei, Margherita; Cataldi, Amelia; Perfetti, Giorgio

    2015-05-01

    The aim of this work is to evaluate differences occurring in bone tissue around dental implants positioned using piezoelectric or conventional drill technique. Twenty-four implants were inserted bilaterally in the iliac crest of 6 sheep after site preparation through a piezoelectric instrument (Test) or after site preparation through conventional drill technique with rotary instruments (Control). Animals were randomly divided to be euthanized at 15 and 30 days post-intervention (p.i.); peri-implant bone samples were withdrawn and processed for histological analysis and immunohistochemical evaluation of iNOS and Bax expression. Active remodeling phenomena in both Test and Control samples are showed at 15 days p.i., while at 30 days p.i., the overall organization of the peri-implant bone resembles native bone tissue. Immunohistochemical evaluation reveals a statistically significant increase of both iNOS and Bax expression at 15 days p.i. compared to samples obtained 30 days p.i. and to native bone. At both healing times, a higher but not statistically significant iNOS and Bax expression is recorded in samples from Control compared to Test Group. Even if the insertion protocol does not seem to significantly interfere with the long-term healing process, implant site preparation through the piezoelectric bone surgery technique may allow a reduction of peri-implant bone tissue inflammation and support a more rapid bone tissue healing phase.

  2. Bone and Soft Tissue Changes after Two-Jaw Surgery in Cleft Patients

    Directory of Open Access Journals (Sweden)

    Yung Sang Yun

    2015-07-01

    Full Text Available BackgroundOrthognathic surgery is required in 25% to 35% of patients with a cleft lip and palate, for whom functional recovery and aesthetic improvement after surgery are important. The aim of this study was to examine maxillary and mandibular changes, along with concomitant soft tissue changes, in cleft patients who underwent LeFort I osteotomy and sagittal split ramus osteotomy (two-jaw surgery.MethodsTwenty-eight cleft patients who underwent two-jaw surgery between August 2008 and November 2013 were included. Cephalometric analysis was conducted before and after surgery. Preoperative and postoperative measurements of the bone and soft tissue were compared.ResultsThe mean horizontal advancement of the maxilla (point A was 6.12 mm, while that of the mandible (point B was -5.19 mm. The mean point A-nasion-point B angle was -4.1° before surgery, and increased to 2.5° after surgery. The mean nasolabial angle was 72.7° before surgery, and increased to 88.7° after surgery. The mean minimal distance between Rickett's E-line and the upper lip was 6.52 mm before surgery and 1.81 mm after surgery. The ratio of soft tissue change to bone change was 0.55 between point A and point A' and 0.93 between point B and point B'.ConclusionsPatients with cleft lip and palate who underwent two-jaw surgery showed optimal soft tissue changes. The position of the soft tissue (point A' was shifted by a distance equal to 55% of the change in the maxillary bone. Therefore, bone surgery without soft tissue correction can achieve good aesthetic results.

  3. Biodegradation, biocompatibility, and osteoconduction evaluation of collagen-nanohydroxyapatite cryogels for bone tissue regeneration.

    Science.gov (United States)

    Salgado, Christiane Laranjo; Grenho, Liliana; Fernandes, Maria Helena; Colaço, Bruno Jorge; Monteiro, Fernando Jorge

    2016-01-01

    Designing biomimetic biomaterials inspired by the natural complex structure of bone and other hard tissues is still a challenge nowadays. The control of the biomineralization process onto biomaterials should be evaluated before clinical application. Aiming at bone regeneration applications, this work evaluated the in vitro biodegradation and interaction between human bone marrow stromal cells (HBMSC) cultured on different collagen/nanohydroxyapatite cryogels. Cell proliferation, differentiation, morphology, and metabolic activity were assessed through different protocols. All the biocomposite materials allowed physiologic apatite deposition after incubation in simulated body fluid and the cryogel with the highest nanoHA content showed to have the highest mechanical strength (DMA). The study clearly showed that the highest concentration of nanoHA granules on the cryogels were able to support cell type's survival, proliferation, and individual functionality in a monoculture system, for 21 days. In fact, the biocomposites were also able to differentiate HBMSCs into osteoblastic phenotype. The composites behavior was also assessed in vivo through subcutaneous and bone implantation in rats to evaluate its tissue-forming ability and degradation rate. The cryogels Coll/nanoHA (30 : 70) promoted tissue regeneration and adverse reactions were not observed on subcutaneous and bone implants. The results achieved suggest that scaffolds of Coll/nanoHA (30 : 70) should be considered promising implants for bone defects that present a grotto like appearance with a relatively small access but a wider hollow inside. This material could adjust to small dimensions and when entering into the defect, it could expand inside and remain in close contact with the defect walls, thus ensuring adequate osteoconductivity.

  4. Osteogenic Differentiation Capacity of In Vitro Cultured Human Skeletal Muscle for Expedited Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Chunlei Miao

    2017-01-01

    Full Text Available Expedited bone tissue engineering employs the biological stimuli to harness the intrinsic regenerative potential of skeletal muscle to trigger the reparative process in situ to improve or replace biological functions. When genetically modified with adenovirus mediated BMP2 gene transfer, muscle biopsies from animals have demonstrated success in regenerating bone within rat bony defects. However, it is uncertain whether the human adult skeletal muscle displays an osteogenic potential in vitro when a suitable biological trigger is applied. In present study, human skeletal muscle cultured in a standard osteogenic medium supplemented with dexamethasone demonstrated significant increase in alkaline phosphatase activity approximately 24-fold over control at 2-week time point. More interestingly, measurement of mRNA levels revealed the dramatic results for osteoblast transcripts of alkaline phosphatase, bone sialoproteins, transcription factor CBFA1, collagen type I, and osteocalcin. Calcified mineral deposits were demonstrated on superficial layers of muscle discs after an extended 8-week osteogenic induction. Taken together, these are the first data supporting human skeletal muscle tissue as a promising potential target for expedited bone regeneration, which of the technologies is a valuable method for tissue repair, being not only effective but also inexpensive and clinically expeditious.

  5. Osteogenic Differentiation Capacity of In Vitro Cultured Human Skeletal Muscle for Expedited Bone Tissue Engineering

    Science.gov (United States)

    Miao, Chunlei; Zhou, Lulu; Tian, Lufeng; Zhang, Yingjie; Zhang, Wei; Yang, Fanghong; Liu, Tianyi

    2017-01-01

    Expedited bone tissue engineering employs the biological stimuli to harness the intrinsic regenerative potential of skeletal muscle to trigger the reparative process in situ to improve or replace biological functions. When genetically modified with adenovirus mediated BMP2 gene transfer, muscle biopsies from animals have demonstrated success in regenerating bone within rat bony defects. However, it is uncertain whether the human adult skeletal muscle displays an osteogenic potential in vitro when a suitable biological trigger is applied. In present study, human skeletal muscle cultured in a standard osteogenic medium supplemented with dexamethasone demonstrated significant increase in alkaline phosphatase activity approximately 24-fold over control at 2-week time point. More interestingly, measurement of mRNA levels revealed the dramatic results for osteoblast transcripts of alkaline phosphatase, bone sialoproteins, transcription factor CBFA1, collagen type I, and osteocalcin. Calcified mineral deposits were demonstrated on superficial layers of muscle discs after an extended 8-week osteogenic induction. Taken together, these are the first data supporting human skeletal muscle tissue as a promising potential target for expedited bone regeneration, which of the technologies is a valuable method for tissue repair, being not only effective but also inexpensive and clinically expeditious. PMID:28210626

  6. From stem cells to bone: phenotype acquisition, stabilization, and tissue engineering in animal models.

    Science.gov (United States)

    Gordeladze, Jan O; Reseland, Janne E; Duroux-Richard, Isabelle; Apparailly, Florence; Jorgensen, Christian

    2009-01-01

    The regeneration of bone tissue depends on the concerted actions of a plethora of signals that recruit mesenchymal stem cells for lineage-specific differentiation, with cellular phenotypes serving various functions throughout their life span. The signals are conveyed in hormones, growth factors, and mechanical forces, all of which ensure proper modeling and remodeling. Both processes are secured by indigenous and programmed metabolism in osteoblasts/osteocytes as well as in other stem cell (SC)-derived cell types (e.g., osteoclasts, bone lining cells) involved in the remodeling of the subject tissue. The focus of this review is the concerted action of these signals as well as the regulatory and/or stabilizing control circuits exhibited by a class of small RNAs, designated microRNAs. We discuss an in vitro approach for ensuring proper phenotype acquisition as well as the choice of scaffolds and animal models for in vivo tissue repair. This approach includes selection of SC niches to optimize bone formation in vivo, transcription factors important for osteoblastogenesis, the Wnt and Notch pathways of signaling, selection of delivery systems for gene therapy, use of appropriate matrices and scaffolds, in vivo mechanostimulation, choice of lesions to be repaired, and type of animal to use. We also discuss Wnt-related and SC-based treatment of osteoporosis. Throughout, we offer considerations for the selection of model systems and parameters to assess the entire procedure from initial SC selection to final bone repair, and conclude with a table summarizing our recommendations.

  7. Scaffolds for Bone Tissue Engineering: State of the art and new perspectives.

    Science.gov (United States)

    Roseti, Livia; Parisi, Valentina; Petretta, Mauro; Cavallo, Carola; Desando, Giovanna; Bartolotti, Isabella; Grigolo, Brunella

    2017-09-01

    This review is intended to give a state of the art description of scaffold-based strategies utilized in Bone Tissue Engineering. Numerous scaffolds have been tested in the orthopedic field with the aim of improving cell viability, attachment, proliferation and homing, osteogenic differentiation, vascularization, host integration and load bearing. The main traits that characterize a scaffold suitable for bone regeneration concerning its biological requirements, structural features, composition, and types of fabrication are described in detail. Attention is then focused on conventional and Rapid Prototyping scaffold manufacturing techniques. Conventional manufacturing approaches are subtractive methods where parts of the material are removed from an initial block to achieve the desired shape. Rapid Prototyping techniques, introduced to overcome standard techniques limitations, are additive fabrication processes that manufacture the final three-dimensional object via deposition of overlying layers. An important improvement is the possibility to create custom-made products by means of computer assisted technologies, starting from patient's medical images. As a conclusion, it is highlighted that, despite its encouraging results, the clinical approach of Bone Tissue Engineering has not taken place on a large scale yet, due to the need of more in depth studies, its high manufacturing costs and the difficulty to obtain regulatory approval. PUBMED search terms utilized to write this review were: "Bone Tissue Engineering", "regenerative medicine", "bioactive scaffolds", "biomimetic scaffolds", "3D printing", "3D bioprinting", "vascularization" and "dentistry". Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Boon and Bane of Inflammation in Bone Tissue Regeneration and Its Link with Angiogenesis.

    Science.gov (United States)

    Schmidt-Bleek, Katharina; Kwee, Brian J; Mooney, David J; Duda, Georg N

    2015-08-01

    Delayed healing or nonhealing of bone is an important clinical concern. Although bone, one of the two tissues with scar-free healing capacity, heals in most cases, healing is delayed in more than 10% of clinical cases. Treatment of such delayed healing condition is often painful, risky, time consuming, and expensive. Tissue healing is a multistage regenerative process involving complex and well-orchestrated steps, which are initiated in response to injury. At best, these steps lead to scar-free tissue formation. At the onset of healing, during the inflammatory phase, stationary and attracted macrophages and other immune cells at the fracture site release cytokines in response to injury. This initial reaction to injury is followed by the recruitment, proliferation, and differentiation of mesenchymal stromal cells, synthesis of extracellular matrix proteins, angiogenesis, and finally tissue remodeling. Failure to heal is often associated with poor revascularization. Since blood vessels mediate the transport of circulating cells, oxygen, nutrients, and waste products, they appear essential for successful healing. The strategy of endogenous regeneration in a tissue such as bone is interesting to analyze since it may represent a blueprint of successful tissue formation. This review highlights the interdependency of the time cascades of inflammation, angiogenesis, and tissue regeneration. A better understanding of these inter-relations is mandatory to early identify patients at risk as well as to overcome critical clinical conditions that limit healing. Instead of purely tolerating the inflammatory phase, modulations of inflammation (immunomodulation) might represent a valid therapeutic strategy to enhance angiogenesis and foster later phases of tissue regeneration.

  9. Tracking calcification in tissue-engineered bone using synchrotron micro-FTIR and SEM.

    Science.gov (United States)

    Deegan, Anthony J; Cinque, Gianfelice; Wehbe, Katia; Konduru, Sandeep; Yang, Ying

    2015-02-01

    One novel tissue engineering approach to mimic in vivo bone formation is the use of aggregate or micromass cultures. Various qualitative and quantitative techniques, such as histochemical staining, protein assay kits and RT-PCR, have been used previously on cellular aggregate studies to investigate how these intricate arrangements lead to mature bone tissue. However, these techniques struggle to reveal spatial and temporal distribution of proliferation and mineralization simultaneously. Synchrotron-based Fourier transform infrared microspectroscopy (micro-FTIR) offers a unique insight at the molecular scale by coupling high IR sensitivity to organic matter with the high spatial resolution allowed by diffraction limited SR microbeam. This study is set to investigate the effects of culture duration and aggregate size on the dynamics and spatial distribution of calcification in engineered bone aggregates by a combination of micro-FTIR and scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX). A murine bone cell line has been used, and small/large bone aggregates have been induced using different chemically treated culture substrates. Our findings suggest that bone cell aggregate culturing can greatly increase levels of mineralization over short culture periods. The size of the aggregates influences mineralisation rates with larger aggregates mineralizing at a faster rate than their smaller counterparts. The micro-FTIR mapping has demonstrated that mineralization in the larger aggregates initiated from the periphery and spread to the centre, whilst the smaller aggregates have more minerals in the centre at the early stage and deposited more in the periphery after further culturing, implying that aggregate size influences calcification distribution and development over time. SEM/EDX data correlates well with the micro-FTIR results for the total mineral content. Thus, synchrotron-based micro-FTIR can accurately track mineralization process

  10. Efficacy of xenogeneic bone grafting with guided tissue regeneration in the management of bone defects after surgical endodontics.

    Science.gov (United States)

    Taschieri, Silvio; Del Fabbro, Massimo; Testori, Tiziano; Weinstein, Roberto

    2007-06-01

    The purpose of this prospective clinical trial was to monitor the outcomes of periradicular surgery in large periapical lesions with or without guided tissue regeneration (GTR) and anorganic bovine bone. All teeth in the study revealed a periradicular lesion measuring at least 10 mm. A total of 63 teeth in 44 patients were included according to specific selection criteria. In the test group, after root end filling was completed, the defect was filled with anorganic bovine bone and was covered with a resorbable collagen membrane. In the control group, neither graft nor membrane was used. A total of 59 teeth in 41 patients were evaluable at 1-year follow-up. Of these, 24 teeth belonged to the test group and 35 to the control group. Overall, 46 teeth (78%) had successfully healed, 10 (16.9%) demonstrated uncertain healing, and 3 exhibited treatment failure. Investigators found no statistically significant differences in outcome between test and control groups. The present study showed that the use of GTR in association with anorganic bovine bone in the treatment of patients with large periradicular lesions of strictly endodontic origin has no beneficial effect on outcome.

  11. Human Bone Marrow Stromal Cells: A Reliable, Challenging Tool for In Vitro Osteogenesis and Bone Tissue Engineering Approaches

    Directory of Open Access Journals (Sweden)

    Ute Hempel

    2016-01-01

    Full Text Available Adult human bone marrow stromal cells (hBMSC are important for many scientific purposes because of their multipotency, availability, and relatively easy handling. They are frequently used to study osteogenesis in vitro. Most commonly, hBMSC are isolated from bone marrow aspirates collected in clinical routine and cultured under the “aspect plastic adherence” without any further selection. Owing to the random donor population, they show a broad heterogeneity. Here, the osteogenic differentiation potential of 531 hBMSC was analyzed. The data were supplied to correlation analysis involving donor age, gender, and body mass index. hBMSC preparations were characterized as follows: (a how many passages the osteogenic characteristics are stable in and (b the influence of supplements and culture duration on osteogenic parameters (tissue nonspecific alkaline phosphatase (TNAP, octamer binding transcription factor 4, core-binding factor alpha-1, parathyroid hormone receptor, bone gla protein, and peroxisome proliferator-activated protein γ. The results show that no strong prediction could be made from donor data to the osteogenic differentiation potential; only the ratio of induced TNAP to endogenous TNAP could be a reliable criterion. The results give evidence that hBMSC cultures are stable until passage 7 without substantial loss of differentiation potential and that established differentiation protocols lead to osteoblast-like cells but not to fully authentic osteoblasts.

  12. Magnesium intake mediates the association between bone mineral density and lean soft tissue in elite swimmers.

    Science.gov (United States)

    Matias, Catarina N; Santos, Diana A; Monteiro, Cristina P; Vasco, Ana M; Baptista, Fátima; Sardinha, Luís B; Laires, Maria J; Silva, Analiza M

    2012-01-01

    Magnesium (Mg) deficiency has been associated with bone disorders. Physical activity is also crucial for bone mineralization. Bone mass loss has been observed to be accelerated in subjects with low Mg intake. We aim to understand if Mg intake mediates the association between bone mineral density (BMD) and lean soft tissue (LST) in elite swimmers. Seventeen elite swimmers (eight males; nine females) were evaluated. Bone mineral content, BMD, LST, and fat mass were assessed using dual energy X-ray absorptiometry. Energy and nutrient intake were assessed during a seven-day period and analyzed with Food Processor SQL. Males presented lower values than the normative data for BMD. Mg, phosphorus (P) and vitamin D intake were significantly lower than the recommended daily allowance. A linear regression model demonstrated a significant association between LST and BMD. When Mg intake was included, we observed that this was a significant, independent predictor of BMD, with a significant increase of 24% in the R(2) of the initial predictive model. When adjusted for energy, vitamin D, calcium, and P intake, Mg remained a significant predictor of BMD. In conclusion, young athletes engaged in low impact sports, should pay special attention to Mg intake, given its potential role in bone mineral mass acquisition during growth.

  13. Strategies to stimulate mobilization and homing of endogenous stem and progenitor cells for bone tissue repair

    Directory of Open Access Journals (Sweden)

    Marietta eHerrmann

    2015-06-01

    Full Text Available The gold standard for the treatment of critical sized bone defects is autologous or allogenic bone graft. This has several limitations including donor site morbidity and the restricted supply of graft material. Cell-based tissue engineering strategies represent an alternative approach. Mesenchymal stem cells (MSCs have been considered as a source of osteoprogenitor cells. More recently, focus has been placed on the use of endothelial progenitor cells (EPCs, since vascularization is a critical step in bone healing. Although many of these approaches have demonstrated effectiveness for bone regeneration, cell-based therapies require time consuming and cost expensive in vitro cell expansion procedures. Accordingly, research is becoming increasingly focused on the homing and stimulation of native cells. The stromal cell-derived factor 1 (SDF-1 – CXCR4 axis has been shown to be critical for the recruitment of MSCs and EPCs. Vascular endothelial growth factor (VEGF is a key factor in angiogenesis and has been targeted in many studies. Here, we present an overview of the different approaches for delivering homing factors to the defect site by absorption or incorporation to biomaterials, gene therapy or via genetically manipulated cells. We further review strategies focusing on the stimulation of endogenous cells to support bone repair. Finally, we discuss the major challenges in the treatment of critical size bone defects and fracture non-unions.

  14. Three-dimensional chitosan-nanohydroxyapatite composite scaffolds for bone tissue engineering

    Science.gov (United States)

    Thein-Han, W. W.; Misra, R. D. K.

    2009-09-01

    We describe the structure of biodegradable chitosan-nanohydroxyapatite (nHA) composites scaffolds and their interaction with pre-osteoblasts for bone tissue engineering. The scaffolds were fabricated via freezing and lyophilization. The nanocomposite scaffolds were characterized by a highly porous structure and pore size of ˜50-125 μm, irrespective of nHA content. The observed significant enhancement in the biological response of pre-osteoblast on nanocomposite scaffolds expressed in terms of cell attachment, proliferation, and widespread morphology in relation to pure chitosan points toward their potential use as scaffold material for bone regeneration.

  15. Low temperature setting polymer-ceramic composites for bone tissue engineering

    Science.gov (United States)

    Sethuraman, Swaminathan

    Tissue engineering is defined as "the application of biological, chemical and engineering principles towards the repair, restoration or regeneration of tissues using scaffolds, cells, factors alone or in combination". The hypothesis of this thesis is that a matrix made of a synthetic biocompatible, biodegradable composite can be designed to mimic the properties of bone, which itself is a composite. The overall goal was to design and develop biodegradable, biocompatible polymer-ceramic composites that will be a practical alternative to current bone repair materials. The first specific aim was to develop and evaluate the osteocompatibility of low temperature self setting calcium deficient apatites for bone tissue engineering. The four different calcium deficient hydroxyapatites evaluated were osteocompatible and expressed the characteristic genes for osteoblast proliferation, maturation, and differentiation. Our next objective was to develop and evaluate the osteocompatibility of biodegradable amino acid ester polyphosphazene in vitro as candidates for forming composites with low temperature apatites. We determined the structure-property relationship, the cellular adhesion, proliferation, and differentiation of primary rat osteoblast cells on two dimensional amino acid ester based polyphosphazene films. Our next goal was to evaluate the amino acid ester based polyphosphazenes in a subcutaneous rat model and our results demonstrated that the polyphosphazenes evaluated in the study were biocompatible. The physio-chemical property characterization, cellular response and gene expression on the composite surfaces were evaluated. The results demonstrated that the precursors formed calcium deficient hydroxyapatite in the presence of biodegradable polyphosphazenes. In addition, cells on the surface of the composites expressed normal phenotype and characteristic genes such as type I collagen, alkaline phosphatase, osteocalcin, osteopontin, and bone sialoprotein. The in vivo

  16. Tautomerizable β-ketonitrile copolymers for bone tissue engineering: Studies of biocompatibility and cytotoxicity

    Energy Technology Data Exchange (ETDEWEB)

    Lastra, M. Laura [Laboratorio de Investigaciones en Osteopatías y Metabolismo Mineral (LIOMM), Facultad de Ciencias Exactas, UNLP (1900), 47 y 115, 1900 La Plata (Argentina); Molinuevo, M. Silvina, E-mail: silvinamolinuevo@yahoo.com.ar [Laboratorio de Investigaciones en Osteopatías y Metabolismo Mineral (LIOMM), Facultad de Ciencias Exactas, UNLP (1900), 47 y 115, 1900 La Plata (Argentina); Giussi, Juan M. [Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), CCT-La Plata, CC16 suc. 4, 1900 La Plata (Argentina); Laboratorio de Estudio de Compuestos Orgánicos (LADECOR), Facultad de Ciencias Exactas, UNLP, 47 y 115, 1900 La Plata (Argentina); Allegretti, Patricia E. [Laboratorio de Estudio de Compuestos Orgánicos (LADECOR), Facultad de Ciencias Exactas, UNLP, 47 y 115, 1900 La Plata (Argentina); Blaszczyk-Lezak, Iwona; Mijangos, Carmen [Instituto de Ciencia y Tecnología de Polímeros, CSIC, Juan de la Cierva 3, 28006 Madrid (Spain); Cortizo, M. Susana, E-mail: gcortizo@infta.unlp.edu.ar [Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), CCT-La Plata, CC16 suc. 4, 1900 La Plata (Argentina)

    2015-06-01

    β-Ketonitrile tautomeric copolymers have demonstrated tunable hydrophilicity/hydrophobicity properties according to surrounding environment, and mechanical properties similar to those of human bone tissue. Both characteristic properties make them promising candidates as biomaterials for bone tissue engineering. Based on this knowledge we have designed two scaffolds based on β-ketonitrile tautomeric copolymers which differ in chemical composition and surface morphology. Two of them were nanostructured, using an anodized aluminum oxide (AAO) template, and the other two obtained by solvent casting methodology. They were used to evaluate the effect of the composition and their structural modifications on the biocompatibility, cytotoxicity and degradation properties. Our results showed that the nanostructured scaffolds exhibited higher degradation rate by macrophages than casted scaffolds (6 and 2.5% of degradation for nanostructured and casted scaffolds, respectively), a degradation rate compatible with bone regeneration times. We also demonstrated that the β-ketonitrile tautomeric based scaffolds supported osteoblastic cell proliferation and differentiation without cytotoxic effects, suggesting that these biomaterials could be useful in the bone tissue engineering field. - Graphical abstract: β-Ketonitrile tautomeric copolymers were nanostructured in nanorods using anodized aluminum oxide (AAO) template. These nanorods had good biocompatibility properties supporting osteoblastic growth and differentiation without cytotoxic effects, making them promising for bone tissue engineering. - Highlights: • Tautomeric β-ketonitrile copolymer based scaffold was obtained with different compositions. • Scaffolds exhibited tunable hydrophilicity/hydrophobicity properties and good mechanical properties. • Nanostructured scaffolds exhibited higher degradation rate than casted scaffolds by macrophages. • Scaffolds support osteoblastic cell proliferation and

  17. Wound healing after irradiation of bone tissues by Er:YAG laser

    Science.gov (United States)

    Watanabe, Hisashi; Yoshino, Toshiaki; Aoki, Akira; Ishikawa, Isao

    1997-05-01

    Clinical applications of Er:YAG laser are now developing in periodontics and restorative dentistry. To date, there have been few studies indicating safety criteria for intraoral usage of the Er:YAG laser. The present study examined the effects of the Er:YAG laser on bone tissues, supposing mis- irradiation in the oral cavity during dental application, especially periodontal surgery. The experiments were performed using the newly-developed Er:YAG laser apparatus equipped with a contact probe. In experiment 1, 10 pulses of laser irradiation were administered to the parietal bone of a rat at 50, 150 and 300 mJ/pulse with and without water irrigation, changing the irradiation distance to 0, 5, 10 and 20 mm, respectively. As a control, electric knife was employed. Macroscopic and SEM observations of the wound surface were performed. In experiment 2, laser irradiation in a straight line was performed at 150 mJ/pulse, 1- pps and 0,5, 10 mm irradiation distance without water irrigation. Wound healing was observed histologically at 0, 3, 7, 14 and 28 days after laser irradiation and compared with that of the control. Non-contact irradiation by Er:YAG laser did not cause severe damage to the parietal bone tissue under water irrigation. Contact irradiation induced a limited wound, however, new bone formation was observed 28 days after laser irradiation, while osseous defect with thermal degenerative tissue remained at the control site. In conclusion, irradiation with an Er:YAG laser would not cause severe damage to surrounding bone tissues in the oral cavity when used within the usual power settings for dental treatment. Furthermore, this laser may be applicable for osseous surgery because of its high ablation efficiency and good wound healing after irradiation.

  18. Cellulose and collagen derived micro-nano structured scaffolds for bone tissue engineering.

    Science.gov (United States)

    Aravamudhan, Aja; Ramos, Daisy M; Nip, Jonathan; Harmon, Matthew D; James, Roshan; Deng, Meng; Laurencin, Cato T; Yu, Xiaojun; Kumbar, Sangamesh G

    2013-04-01

    Scaffold based bone tissue engineering (BTE) has made great progress in regenerating lost bone tissue. Materials of natural and synthetic origin have been used for scaffold fabrication. Scaffolds derived from natural polymers offer greater bioactivity and biocompatibility with mammalian tissues to favor tissue healing, due to their similarity to native extracellular matrix (ECM) components. Often it is a challenge to fabricate natural polymer based scaffolds for BTE applications without compromising their bioactivity, while maintaining adequate mechanical properties. In this work, we report the fabrication and characterization of cellulose and collagen based micro-nano structured scaffolds using human osteoblasts (HOB) for BTE applications. These porous micro-nano structured scaffolds (average pore diameter 190 +/- 10 microm) exhibited mechanical properties in the mid range of human trabecular bone (compressive modulus 266.75 +/- 33.22 MPa and strength 12.15 3 +/- 2.23 MPa). These scaffolds supported the greater adhesion and phenotype maintenance of cultured HOB as reflected by higher levels of osteogenic enzyme alkaline phosphatase and mineral deposition compared to control polyester micro-nano structured scaffolds of identical pore properties. These natural polymer based micro-nano structured scaffolds may serve as alternatives to polyester based scaffolds for BTE applications.

  19. Effect of hemiplegia on bone mass and soft tissue body composition

    Energy Technology Data Exchange (ETDEWEB)

    Iversen, E.; Hassager, C.; Christiansen, C.

    1989-01-01

    The content of bone mineral (BMC), lean tissue, and fat tissue were measured by single and dual photon absorptiometry in both the paretic and the nonparetic limbs of 15 patients, hemiplegic due to cerebrovascular accident 23-38 weeks earlier. Compared with the non-paretic arm, the paretic arm had approximately 10% lower (P < 0.01) BMC. This difference was largest at the measuring site with the highest ratio of trabecular to compact bone. The paretic leg had a 4% (P < 0.001) lower BMC than the non-paretic leg. For both the arms and the legs, the lean content was lower (P < 0.05) and the fat content higher (P < 0.01) in the paretic than in the non-paretic. This was relatively more pronounced in the arms than in the legs. We conclude that partial immobilization, owing to parasis after a cerebrovascular accident, results in characteristic changes in the affected limbs, with a marked decrease in the content of bone and lean tissue and a pronounced increase in fatty tissue.

  20. Core-shell fibrous stem cell carriers incorporating osteogenic nanoparticulate cues for bone tissue engineering.

    Science.gov (United States)

    Olmos Buitrago, Jennifer; Perez, Roman A; El-Fiqi, Ahmed; Singh, Rajendra K; Kim, Joong-Hyun; Kim, Hae-Won

    2015-12-01

    Moldable hydrogels that incorporate stem cells hold great promise for tissue engineering. They secure the encapsulated cells for required periods while allowing a permeable exchange of nutrients and gas with the surroundings. Core-shell fibrous structured hydrogel system represents these properties relevant to stem cell delivery and defect-adjustable tissue engineering. A designed dual concentric nozzle is used to simultaneously deposit collagen and alginate with a core-shell structured continuous fiber form in the ionic calcium bath. We aimed to impart extrinsic osteogenic cues in the nanoparticulate form, i.e., bioactive glass nanoparticles (BGn), inside the alginate shell, while encapsulating rat mesenchymal stem cells in the collagen core. Ionic measurement in aqueous solution indicated a continuous release of calcium ions from the BGn-added and -free scaffolds, whereas silicon was only released from the BGn-containing scaffolds. The presence of BGn allowed higher number of cells to migrate into the scaffolds when implanted in subcutaneous tissues of rat. Cell viability was preserved in the presence of the BGn, with no significant differences noticed from the control. The presence of BGn enhanced the osteogenic differentiation of the encapsulated rat mesenchymal stem cells, presenting higher levels of alkaline phosphatase activity as well as bone related genes, including collagen type I, bone sialoprotein and osteocalcin. Taken together, the incorporated BGn potentiated the capacity of the core-shell fibrous hydrogel system to deliver stem cells targeting bone tissue engineering. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  1. Amniotic fluid-derived stem cells as a cell source for bone tissue engineering.

    Science.gov (United States)

    Rodrigues, Márcia T; Lee, Sang Jin; Gomes, Manuela E; Reis, Rui L; Atala, Anthony; Yoo, James J

    2012-12-01

    In tissue engineering, stem cells have become an ideal cell source that can differentiate into most human cell types. Among the stem cells, bone marrow-derived stem cells (BMSCs) have been widely studied, and there is strong evidence that these cells can be differentiated into cells of the osteogenic lineage. Thus, BMSCs have become the gold standard for studies of tissue engineering in orthopedics. However, novel stem cell sources, such as amniotic fluid-derived stem cells (AFSCs) have been identified, and these have important and unique features that may lead to novel and successful applications toward the regeneration of bone tissue. This study was designed to originally compare the osteogenic potential of both BMSCs and AFSCs under distinct culture environments to determine whether the osteogenic differentiation process of both types of stem cells is related to the origin of the cells. Osteogenic differentiation was carried out in both two and three dimensions using a tissue culture plate and by means of seeding the cells onto microfibrous starch and poly(ɛ-caprolactone) scaffolds (a blend of starch and polycaprolactone), respectively. BMSCs and AFSCs were successfully differentiated into the osteogenic cell type, as cells derived from them produced a mineralized extracellular matrix. Nevertheless, the two types of cells presented different expression patterns of bone-related markers as well as different timing of differentiation, indicating that both cell origin and the culture environment have a significant impact on the differentiation into the osteogenic phenotype in AFSCs and BMSCs.

  2. Preparation and mechanical property of a novel 3D porous magnesium scaffold for bone tissue engineering.

    Science.gov (United States)

    Zhang, Xue; Li, Xiao-Wu; Li, Ji-Guang; Sun, Xu-Dong

    2014-09-01

    Porous magnesium has been recently recognized as a biodegradable metal for bone substitute applications. A novel porous Mg scaffold with three-dimensional (3D) interconnected pores and with a porosity of 33-54% was produced by the fiber deposition hot pressing (FDHP) technology. The microstructure and morphologies of the porous Mg scaffold were characterized by scanning electron microscopy (SEM), and the effects of porosities on the microstructure and mechanical properties of the porous Mg were investigated. Experimental results indicate that the measured Young's modulus and compressive strength of the Mg scaffold are ranged in 0.10-0.37 GPa, and 11.1-30.3 MPa, respectively, which are fairly comparable to those of cancellous bone. Such a porous Mg scaffold having a 3D interconnected network structure has the potential to be used in bone tissue engineering.

  3. Metals in Bone Tissue of Antillean Manatees from the Gulf of Mexico and Chetumal Bay, Mexico.

    Science.gov (United States)

    Romero-Calderón, Ana G; Morales-Vela, Benjamin; Rosíles-Martínez, René; Olivera-Gómez, León D; Delgado-Estrella, Alberto

    2016-01-01

    Concentrations of seven metals (As, Cd, Cr, Cu, Pb, Ni, and Zn) were analyzed in 33 bone tissue samples of Antillean manatees (Trichechus manatus manatus) found dead in lagoons and rivers of Tabasco and Campeche in the Gulf of Mexico and Chetumal Bay in the Caribbean region. The concentrations of Cr, Cu, Pb, and Zn were significantly different between regions, with greater levels found in the Gulf of Mexico group than in the Mexican Caribbean group (p < 0.05). Pb concentrations differed significantly between adults and calves. No differences were observed between sexes. Metal concentrations detected in the manatee bones were higher than most of those reported for bones in other marine mammals around the world. Future studies are necessary to establish whether the metal concentrations represent a risk to the health of the species.

  4. The use of total human bone marrow fraction in a direct three-dimensional expansion approach for bone tissue engineering applications: focus on angiogenesis and osteogenesis.

    Science.gov (United States)

    Guerrero, Julien; Oliveira, Hugo; Catros, Sylvain; Siadous, Robin; Derkaoui, Sidi-Mohammed; Bareille, Reine; Letourneur, Didier; Amédée, Joëlle

    2015-03-01

    Current approaches in bone tissue engineering have shown limited success, mostly owing to insufficient vascularization of the construct. A common approach consists of co-culture of endothelial cells and osteoblastic cells. This strategy uses cells from different sources and differentiation states, thus increasing the complexity upstream of a clinical application. The source of reparative cells is paramount for the success of bone tissue engineering applications. In this context, stem cells obtained from human bone marrow hold much promise. Here, we analyzed the potential of human whole bone marrow cells directly expanded in a three-dimensional (3D) polymer matrix and focused on the further characterization of this heterogeneous population and on their ability to promote angiogenesis and osteogenesis, both in vitro and in vivo, in a subcutaneous model. Cellular aggregates were formed within 24 h and over the 12-day culture period expressed endothelial and bone-specific markers and a specific junctional protein. Ectopic implantation of the tissue-engineered constructs revealed osteoid tissue and vessel formation both at the periphery and within the implant. This work sheds light on the potential clinical use of human whole bone marrow for bone regeneration strategies, focusing on a simplified approach to develop a direct 3D culture without two-dimensional isolation or expansion.

  5. The expression and regulation of bone-acting cytokines in human peripheral adipose tissue in organ culture.

    Science.gov (United States)

    Harsløf, T; Husted, L B; Carstens, M; Stenkjaer, L; Sørensen, L; Pedersen, S B; Langdahl, B L

    2011-06-01

    The humoral cross-talk between bone and fat is an area of increasing interest. We investigated the expression and regulation of the bone-acting cytokines; bone morphogenetic protein 2 (BMP2), connective tissue growth factor (CTGF), osteoprotegerin (OPG), and transforming growth factor beta (TGFB1). Subcutaneous adipose tissue was aspirated from lean, healthy women. Tissue samples were incubated with interleukin 1-β (IL1-β), tumor necrosis factor-α (TNF-α), cortisol, troglitazone, IL1-β + troglitazone, or vehicle. Gene expression in the adipose tissue was analyzed using qPCR and protein levels in the incubation media were analyzed using ELISA. OPG expression and secretion was diminished by 40.8% and 43.1% respectively, by cortisol, and OPG expression was diminished by 67.5% by troglitazone (peffects on bone. We suggest that this could be mediated via altered cytokine production in adipose tissue. Moreover, obese individuals have a low-grade inflammation in their adipose tissue and have higher bone mineral density than lean individuals. We suggest that this inflammation may increase the expression and secretion of OPG and CTGF and thereby increase BMD. In conclusion, bone acting cytokines are produced in the adipose tissue and may affect bone through endocrine mechanisms. © Georg Thieme Verlag KG Stuttgart · New York.

  6. Collagen modifications in postmenopausal osteoporosis: advanced glycation endproducts may affect bone volume, structure and quality.

    Science.gov (United States)

    Willett, Thomas L; Pasquale, Julia; Grynpas, Marc D

    2014-09-01

    The classic model of postmenopausal osteoporosis (PM-OP) starts with the depletion of estrogen, which in turn stimulates imbalanced bone remodeling, resulting in loss of bone mass/volume. Clinically, this leads to fractures because of structural weakness. Recent work has begun to provide a more complete picture of the mechanisms of PM-OP involving oxidative stress and collagen modifications known as advanced glycation endproducts (AGEs). On one hand, AGEs may drive imbalanced bone remodeling through signaling mediated by the receptor for AGEs (RAGE), stimulating resorption and inhibiting formation. On the other hand, AGEs are associated with degraded bone material quality. Oxidative stress promotes the formation of AGEs, inhibits normal enzymatically derived crosslinking and can degrade collagen structure, thereby reducing fracture resistance. Notably, there are multiple positive feedback loops that can exacerbate the mechanisms of PM-OP associated with oxidative stress and AGEs. Anti-oxidant therapies may have the potential to inhibit the oxidative stress based mechanisms of this disease.

  7. Fabrication of 3D porous SF/β-TCP hybrid scaffolds for bone tissue reconstruction.

    Science.gov (United States)

    Park, Hyun Jung; Min, Kyung Dan; Lee, Min Chae; Kim, Soo Hyeon; Lee, Ok Joo; Ju, Hyung Woo; Moon, Bo Mi; Lee, Jung Min; Park, Ye Ri; Kim, Dong Wook; Jeong, Ju Yeon; Park, Chan Hum

    2016-07-01

    Bio-ceramic is a biomaterial actively studied in the field of bone tissue engineering. But, only certain ceramic materials can resolve the corrosion problem and possess the biological affinity of conventional metal biomaterials. Therefore, the recent development of composites of hybrid composites and polymers has been widely studied. In this study, we aimed to select the best scaffold of silk fibroin and β-TCP hybrid for bone tissue engineering. We fabricated three groups of scaffold such as SF (silk fibroin scaffold), GS (silk fibroin/small granule size of β-TCP scaffold) and GM (silk fibroin/medium granule size of β-TCP scaffold), and we compared the characteristics of each group. During characterization of the scaffold, we used scanning electron microscopy (SEM) and a Fourier transform infrared spectroscopy (FTIR) for structural analysis. We compared the physiological properties of the scaffold regarding the swelling ratio, water uptake and porosity. To evaluate the mechanical properties, we examined the compressive strength of the scaffold. During in vitro testing, we evaluated cell attachment and cell proliferation (CCK-8). Finally, we confirmed in vivo new bone regeneration from the implanted scaffolds using histological staining and micro-CT. From these evaluations, the fabricated scaffold demonstrated high porosity with good inter-pore connectivity, showed good biocompatibility and high compressive strength and modulus. In particular, the present study indicates that the GM scaffold using β-TCP accelerates new bone regeneration of implanted scaffolds. Accordingly, our scaffold is expected to act a useful application in the field of bone tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1779-1787, 2016.

  8. Structure and functionalization of mesoporous bioceramics for bone tissue regeneration and local drug delivery.

    Science.gov (United States)

    Vallet-Regí, María; Izquierdo-Barba, Isabel; Colilla, Montserrat

    2012-03-28

    This review article describes the importance of structure and functionalization in the performance of mesoporous silica bioceramics for bone tissue regeneration and local drug delivery purposes. Herein, we summarize the pivotal features of mesoporous bioactive glasses, also known as 'templated glasses' (TGs), which present chemical compositions similar to those of conventional bioactive sol-gel glasses and the added value of an ordered mesopore arrangement. An in-depth study concerning the possibility of tailoring the structural and textural characteristics of TGs at the nanometric scale and their influence on bioactive behaviour is discussed. The highly ordered mesoporous arrangement of cavities allows these materials to confine drugs to be subsequently released, acting as drug delivery devices. The functionalization of mesoporous silica walls has been revealed as the cornerstone in the performance of these materials as controlled release systems. The synergy between the improved bioactive behaviour and local sustained drug release capability of mesostructured materials makes them suitable to manufacture three-dimensional macroporous scaffolds for bone tissue engineering. Finally, this review tackles the possibility of covalently grafting different osteoinductive agents to the scaffold surface that act as attracting signals for bone cells to promote the bone regeneration process.

  9. Mechanical and mineral properties of osteogenesis imperfecta human bones at the tissue level.

    Science.gov (United States)

    Imbert, Laurianne; Aurégan, Jean-Charles; Pernelle, Kélig; Hoc, Thierry

    2014-08-01

    Osteogenesis imperfecta (OI) is a genetic disorder characterized by an increase in bone fragility on the macroscopic scale, but few data are available to describe the mechanisms involved on the tissue scale and the possible correlations between these scales. To better understand the effects of OI on the properties of human bone, we studied the mechanical and chemical properties of eight bone samples from children suffering from OI and compared them to the properties of three controls. High-resolution computed tomography, nanoindentation and Raman microspectroscopy were used to assess those properties. A higher tissue mineral density was found for OI bone (1.131 gHA/cm3 vs. 1.032 gHA/cm3, p=0.032), along with a lower Young's modulus (17.6 GPa vs. 20.5 GPa, p=0.024). Obviously, the mutation-induced collagen defects alter the collagen matrix, thereby affecting the mineralization. Raman spectroscopy showed that the mineral-to-matrix ratio was higher in the OI samples, while the crystallinity was lower, suggesting that the mineral crystals were smaller but more abundant in the case of OI. This change in crystal size, distribution and composition contributes to the observed decrease in mechanical strength.

  10. An audit of MRI for bone and soft-tissue tumours performed at referral centres

    Energy Technology Data Exchange (ETDEWEB)

    Saifuddin, A.; Twinn, P.; Emanuel, R.; Cannon, S.R

    2000-07-01

    AIM: Magnetic resonance imaging (MRI) is essential in the pre-operative staging of suspected primary bone and soft-tissue sarcomas. Such lesions are ideally managed in specialist centres but it is becoming increasingly common for patients to undergo MRI before referral. The aim of this study was to assess the adequacy of such studies. MATERIALS AND METHODS: Fifty patients (30 men, 20 women; mean age 39 years, range 9-89 years) were included over a 1-year period. Tumours included 31 suspected primary bone tumours and 19 soft-tissue tumours. RESULTS: The total number of sequences used was 225 (mean 4, range 2-8). Enhancement was used in 19 cases. The commonest mistake was the failure to image the whole bone for 'skip' metastases in 50% of appropriate cases (high-grade malignant lesions of bone). Reports were available in 40 cases. Specific information regarding precise intraosseous and extraosseous extent of tumour and relationship to the neurovascular bundle and adjacent joint was commonly not included. CONCLUSIONS: This audit indicates that a greater awareness is needed amongst general radiologists of the MR imaging and reporting requirements for musculoskeletal tumours. In particular, all important axial imaging is sometimes omitted. Saifuddin, A. (2000)

  11. FAT EMBOLISM SYNDROME WITHOUT OBJECTIVE EVIDENCE OF BONE OR SOFT TISSUE INJURY

    Directory of Open Access Journals (Sweden)

    Amitabh Das

    2014-10-01

    Full Text Available Fat embolism syndrome (FES, without evidence of bone or soft tissue injury is uncommon, and in absence of validated diagnostic criteria, its diagnosis is mainly dependent on treating clinician, who should have high index of suspicion. Treatment is predominantly supportive, and apart from some mortality, recovery is generally seen. Present article is a case report of a boy who suffered blunt injury due to fall from height, had no objective evidence of bone or soft tissue injury, but diagnosed as a case of fat embolism syndrome, using Gurd-Wilson and Schonfeld’s criteria, treated by pulmonary support and aggressive resuscitation, but he died after 4 days of admission to hospital.

  12. Impact of mechanical stretch on the cell behaviors of bone and surrounding tissues

    Directory of Open Access Journals (Sweden)

    Hye-Sun Yu

    2016-02-01

    Full Text Available Mechanical loading is recognized to play an important role in regulating the behaviors of cells in bone and surrounding tissues in vivo. Many in vitro studies have been conducted to determine the effects of mechanical loading on individual cell types of the tissues. In this review, we focus specifically on the use of the Flexercell system as a tool for studying cellular responses to mechanical stretch. We assess the literature describing the impact of mechanical stretch on different cell types from bone, muscle, tendon, ligament, and cartilage, describing individual cell phenotype responses. In addition, we review evidence regarding the mechanotransduction pathways that are activated to potentiate these phenotype responses in different cell populations.

  13. Brain tissue volumes in the general population of the elderly: the AGES-Reykjavik study.

    Science.gov (United States)

    Sigurdsson, Sigurdur; Aspelund, Thor; Forsberg, Lars; Fredriksson, Jesper; Kjartansson, Olafur; Oskarsdottir, Bryndis; Jonsson, Palmi V; Eiriksdottir, Gudny; Harris, Tamara B; Zijdenbos, Alex; van Buchem, Mark A; Launer, Lenore J; Gudnason, Vilmundur

    2012-02-15

    Imaging studies have reported conflicting findings on how brain structure differs with age and sex. This may be explained by discrepancies and limitations in study population and study design. We report a study on brain tissue volumes in one of the largest cohorts of individuals studied to date of subjects with high mean age (mean ± standard deviation (SD) 76 ± 6 years). These analyses are based on magnetic resonance imaging (MRI) scans acquired at baseline on 4303 non-demented elderly, and 367 who had a second MRI, on average 2.5 ± 0.2 years later. Tissue segmentation was performed with an automatic image analysis pipeline. Total brain parenchymal (TBP) volume decreased with increasing age while there was an increase in white matter hyperintensities (WMH) in both sexes. A reduction in both normal white matter (NWM)- and gray matter (GM) volume contributed to the brain shrinkage. After adjusting for intra-cranial volume, women had larger brain volumes compared to men (3.32%, p < 0.001) for TBP volume in the cross-sectional analysis. The longitudinal analysis showed a significant age-sex interaction in TBP volume with a greater rate of annual change in men (-0.70%, 95%CI: -0.78% to -0.63%) than women (-0.55%, 95%CI: -0.61% to -0.49%). The annual change in the cross-sectional data was approximately 40% less than the annual change in the longitudinal data and did not show significant age-sex interaction. The findings indicate that the cross-sectional data underestimate the rate of change in tissue volumes with age as the longitudinal data show greater rate of change in tissue volumes with age for all tissues.

  14. Tissue microarray technique is applicable to bone marrow biopsies of myeloproliferative neoplasms.

    Science.gov (United States)

    Limberger, Kathrin A; Bogatyreva, Lioudmila; Todorova, Rumyana; Herde, Bettina; Hauschke, Dieter; Pahl, Heike L; Werner, Martin; Aumann, Konrad

    2017-01-01

    Tissue microarray (TMA) technique is an established high-throughput method to analyze multiple tissue specimens in parallel. However, in order to obtain reliable results from immunohistochemical analyses of TMA blocks, cell composition of TMA spots must correspond to whole tissue sections (WTS) particularly in tissues with a heterogeneous cell composition as it is the case in myeloproliferative neoplasms (MPN). The aim of this study was to validate TMA of bone marrow biopsies from MPN patients. TMAs of MPN bone marrow biopsies (ET: n = 26, PV: n = 26, and PMF: n = 29) were compiled in triplicates and MPN-specific histological parameters were assessed. Results of TMA spots were compared with WTS' results using the intra-class correlation coefficient (ICC). Immunohistochemical NFE2 and calreticulin stainings of the TMA with quantitative evaluation were performed. TMA construction was technically successful with a loss of 10 % of all spots. ICC calculation revealed high to moderate correlations of TMA with WTS, especially the parameters that are typically affected in MPN tissue, e.g. cellularity of hematopoiesis (ICC 0.62-0.89), number of megakaryocytes (ICC 0.50-0.71), micro-vessel density (ICC 0.56-0.91), or grade of myelofibrosis (ICC 0.56-0.89). Results of NFE2 and calreticulin immunohistochemistry of MPN TMAs are consistent with previously published data. Overall, our results show moderate to good correlation between histological data of WTS and TMA spots illustrating that the TMA technique is applicable to bone marrow biopsies of MPN patients. However, TMA construction in triplicates is necessary to reach sufficient correlation. MPN TMAs can be applied for serial immunohistochemical surveys of archived tissues to assess the mutation status or to further sub-classify MPN cases.

  15. Lipidomic Profiling of Mastoid Bone and Tissue from Patients with Chronic Otomastoiditis

    Directory of Open Access Journals (Sweden)

    Fazlollahi, Farbod

    2015-01-01

    Full Text Available Introduction Chronic otomastoiditis causes pain, otorrhea, and hearing loss resulting from the growth of tissue within the normally hollow mastoid cavity. Objectives In this report, we used a lipidomics approach to profile major mastoid bone and tissue lipids from patients with and without otomastoiditis. Methods The bone dust created during mastoidectomy, as well as the mastoid tissue, was analyzed from seven patients. Bone dust was also collected and analyzed in an additional four otologic cases (parotidectomy requiring mastoidectomy. Samples were subjected to a modified Bligh/Dyer lipid extraction, then high-performance thin-layer chromatography (HPTLC, combined gas chromatography/electron impact-mass spectrometry (GC/EI-MS, and flow-injection/electrospray ionization-tandem mass spectrometry (FI/ESI-MSMS. Data were analyzed for identification and profiling of major lipid components. Results HPTLC revealed the presence of various lipid classes, including phosphatidylcholines, cholesterol, and triacylglycerols. GC/EI-MS analysis revealed the presence of cholesterol and several fatty acids. FI/ESI-MSMS analysis revealed a host of phosphatidylcholines, phosphatidylethanolamines, and cholesteryl esters. Conclusion We used a lipidomics approach to develop an efficient (both in time and tissue amount methodology for analysis of these tissues, identify the most abundant and common lipid species, and create a base of knowledge from which more focused endeavors in biomarker discovery can emerge. In an effort toward improved patient categorization and individualized intervention, the ultimate goal of this work is to correlate these lipid molecules to disease state and progression. This is the first reported study of its kind on these tissues.

  16. Biomineralization of a Self-Assembled Extracellular Matrix for Bone Tissue Engineering

    Science.gov (United States)

    Meng, Yizhi; DiMasi, Elaine; Ba, Xiaolan; Rafailovich, Miriam; Pernodet, Nadine

    2009-01-01

    Understanding how biomineralization occurs in the extracellular matrix (ECM) of bone cells is crucial to the understanding of bone formation and the development of a successfully engineered bone tissue scaffold. It is still unclear how ECM mechanical properties affect protein-mineral interactions in early stages of bone mineralization. We investigated the longitudinal mineralization properties of MC3T3-E1 cells and the elastic modulus of their ECM using shear modulation force microscopy, synchrotron grazing incidence X-ray diffraction (GIXD), scanning electron microscopy, energy dispersive X-ray spectroscopy, and confocal laser scanning microscopy (CLSM). The elastic modulus of the ECM fibers underwent significant changes for the mineralizing cells, which were not observed in the nonmineralizing cells. On substrates conducive to ECM network production, the elastic modulus of mineralizing cells increased at time points corresponding to mineral production, whereas that of the nonmineralizing cells did not vary over time. The presence of hydroxyapatite in mineralizing cells and the absence thereof in the nonmineralizing ones were confirmed by GIXD, and CLSM showed that a restructuring of actin occurred only for mineral-producing cells. These results show that the correct and complete development of the ECM network is required for osteoblasts to mineralize. This in turn requires a suitably prepared synthetic substrate for bone development to succeed in vitro. PMID:18759666

  17. Biodegradable nanofibers-reinforced microfibrous composite scaffolds for bone tissue engineering.

    Science.gov (United States)

    Martins, Albino; Pinho, Elisabete D; Correlo, Vítor M; Faria, Susana; Marques, Alexandra P; Reis, Rui L; Neves, Nuno M

    2010-12-01

    Native bone extracellular matrix (ECM) is a complex hierarchical fibrous composite structure, resulting from the assembling of collagen fibrils at several length scales, ranging from the macro to the nanoscale. The combination of nanofibers within microfibers after conventional reinforcement methodologies seems to be a feasible solution to the rational design of highly functional synthetic ECM substitutes. The present work aims at the development of bone ECM inspired structures, conjugating electrospun chitosan (Cht) nanofibers within biodegradable polymeric microfibers [poly(butylene succinate)-PBS and PBS/Cht], assembled in a fiber mesh structure. The nanofibers-reinforced composite fiber mesh scaffolds were seeded with human bone marrow mesenchymal stem cells (hBMSCs) and cultured under osteogenic differentiation conditions. These nanofibers-reinforced composite scaffolds sustained ECM deposition and mineralization, mainly in the PBS/Cht-based fiber meshes, as depicted by the increased amount of calcium phosphates produced by the osteogenic differentiated hBMSCs. The osteogenic genotype of the cultured hBMSCs was confirmed by the expression of osteoblastic genes, namely Alkaline Phosphatase, Osteopontin, Bone Sialoprotein and Osteocalcin, and the transcription factors Runx2 and Osterix, all involved in different stages of the osteogenesis. These data represent the first report on the biological functionality of nanofibers-reinforced composite scaffolds, envisaging the applicability of the developed structures for bone tissue engineering.

  18. Hybrid Matrix Grafts to Favor Tissue Regeneration in Rabbit Femur Bone Lesions

    Science.gov (United States)

    Goy, Dante Pascual; Gorosito, Emmanuel; Costa, Hermes S; Mortarino, Pablo; Pedemonte, Noelia Acosta; Toledo, Javier; Mansur, Herman S; Pereira, Marivalda M; Battaglino, Ricardo; Feldman, Sara

    2012-01-01

    At present, typical approaches employed to repair fractures and other bone lesions tend to use matrix grafts to promote tissue regeneration. These grafts act as templates, which promote cellular adhesion, growth and proliferation, osteoconduction, and even osteoinduction, which commonly results in de novo osteogenesis. The present work aimed to study the bone-repairing ability of hybrid matrixes (HM) prepared with polyvinyl alcohol (PVA) and bioactive glass in an experimental rabbit model. The HM were prepared by combining 30% bioactive glass (nominal composition of 58% SiO2 -33 % CaO - 9% P2O5) and 70% PVA. New Zealand rabbits were randomly divided into the control group (C group) and two groups with bone lesions, in which one received a matrix implant HM (Implant group), while the other did not (no Implant group). Clinical monitoring showed no altered parameters from either the Implant or the no Implant groups as compared to the control group, for the variables of diet grades, day and night temperatures and hemograms. In the Implant group, radiologic and tomographic studies showed implanted areas with clean edges in femoral non-articular direction, and radio-dense images that suggest incipient integration. Minimum signs of phlogosis could be observed, whereas no signs of rejection at this imaging level could be identified. Histological analysis showed evidence of osteo-integration, with the formation of a trabecular bone within the implant. Together, these results show that implants of hybrid matrixes of bioactive glass are capable of promoting bone regeneration. PMID:22848334

  19. Biomineralization of a Self-Assembled Extracellular Matrix for Bone Tissue Engineering

    Energy Technology Data Exchange (ETDEWEB)

    Yizhi, M.; Yi-Xian, Q; DiMasi, E; Xiaolan, B; Rafailovich, M; Pernodet, N

    2009-01-01

    Understanding how biomineralization occurs in the extracellular matrix (ECM) of bone cells is crucial to the understanding of bone formation and the development of a successfully engineered bone tissue scaffold. It is still unclear how ECM mechanical properties affect protein-mineral interactions in early stages of bone mineralization. We investigated the longitudinal mineralization properties of MC3T3-E1 cells and the elastic modulus of their ECM using shear modulation force microscopy, synchrotron grazing incidence X-ray diffraction (GIXD), scanning electron microscopy, energy dispersive X-ray spectroscopy, and confocal laser scanning microscopy (CLSM). The elastic modulus of the ECM fibers underwent significant changes for the mineralizing cells, which were not observed in the nonmineralizing cells. On substrates conducive to ECM network production, the elastic modulus of mineralizing cells increased at time points corresponding to mineral production, whereas that of the nonmineralizing cells did not vary over time. The presence of hydroxyapatite in mineralizing cells and the absence thereof in the nonmineralizing ones were confirmed by GIXD, and CLSM showed that a restructuring of actin occurred only for mineral-producing cells. These results show that the correct and complete development of the ECM network is required for osteoblasts to mineralize. This in turn requires a suitably prepared synthetic substrate for bone development to succeed in vitro.

  20. On ultrasound waves guided by bones with coupled soft tissues: a mechanism study and in vitro calibration.

    Science.gov (United States)

    Chen, Jiangang; Su, Zhongqing

    2014-07-01

    The influence of soft tissues coupled with cortical bones on precision of quantitative ultrasound (QUS) has been an issue in the clinical bone assessment in conjunction with the use of ultrasound. In this study, the effect arising from soft tissues on propagation characteristics of guided ultrasound waves in bones was investigated using tubular Sawbones phantoms covered with a layer of mimicked soft tissue of different thicknesses and elastic moduli, and an in vitro porcine femur in terms of the axial transmission measurement. Results revealed that presence of soft tissues can exert significant influence on the propagation of ultrasound waves in bones, leading to reduced propagation velocities and attenuated wave magnitudes compared with the counterparts in a free bone in the absence of soft tissues. However such an effect is not phenomenally dependent on the variations in thickness and elastic modulus of the coupled soft tissues, making it possible to compensate for the coupling effect regardless of the difference in properties of the soft tissues. Based on an in vitro calibration, this study proposed quantitative compensation for the effect of soft tissues on ultrasound waves in bones, facilitating development of high-precision QUS.

  1. Injectable in situ-forming pH/thermo-sensitive hydrogel for bone tissue engineering.

    Science.gov (United States)

    Kim, Hea Kyung; Shim, Woo Sun; Kim, Sung Eun; Lee, Kweon-Haeng; Kang, Eunah; Kim, Jong-Ho; Kim, Kwangmeyung; Kwon, Ick Chan; Lee, Doo Sung

    2009-04-01

    We developed a novel pH- and thermo-sensitive hydrogel as a scaffold for autologous bone tissue engineering. We synthesized this polymer by adding pH-sensitive sulfamethazine oligomers (SMOs) to both ends of a thermo-sensitive poly(epsilon-caprolactone-co-lactide)-poly(ethylene glycol)-poly(epsilon-caprolactone-co-lactide) (PCLA-PEG-PCLA) block copolymer, yielding a pH/thermo-sensitive SMO-PCLA-PEG-PCLA-SMO block copolymer. The synthesized block copolymer solution rapidly formed a stable gel under physiological conditions (pH 7.4 and 37 degrees C), whereas it formed a sol at pH 8.0 and 37 degrees C, making it injectable. This pH/thermo-sensitive hydrogel exhibited high biocompatibility in a Dulbecco's modified Eagle's medium extract test. Under physiological conditions, the hydrogel easily encapsulated human mesenchymal stem cells (hMSCs) and recombinant human bone morphogenetic protein-2 (rhBMP-2), with encapsulating efficiencies of about 90% and 85%, respectively. To assay for ectopic bone formation in vivo, we subcutaneously injected a polymer solution containing hMSCs and rhBMP-2 into the back of mice, after which we could observe hMSC differentiation for up to 7 weeks. Histological studies revealed mineralized tissue formation and high levels of alkaline phosphatase activity in the mineralized tissue. Therefore, this pH/thermo-sensitive SMO-PCLA-PEG-PCLA-SMO block copolymer demonstrated potential as an injectable scaffold for bone tissue engineering, with in situ formation capabilities.

  2. Using absorbable collagen membranes for guided tissue regeneration, guided bone regeneration, and to treat gingival recession.

    Science.gov (United States)

    Wang, H L; Carroll, W J

    2000-05-01

    This article reviews the role of barrier membranes in guided tissue regeneration (GTR) and guided bone regeneration (GBR), including the advantages of using absorbable barrier membranes in GTR and GBR and the unique properties of collagen membranes. The indications and contraindications for using collagen membranes for these procedures are examined, and successful cases are presented. Finally, the role of collagen membranes in the future of regenerative therapy is considered.

  3. Detection of benzodiazepines in different tissues, including bone, using a quantitative ELISA assay.

    Science.gov (United States)

    Gorczynski, L Y; Melbye, F J

    2001-07-01

    Benzodiazepines were analyzed in different tissue samples, including hone, by ELISA. The sensitivity of detection for different benzodiazepines was consistent with the manufacturer's reports of the cross reactivities of the antibodies used, with the greatest sensitivity for midazolam and the least for diazepam; in addition the pharmacokinetics was consistent with the known duration of action of the different benzodiazepines, with midazolam cleared rapidly, and diazepam slowly. Following intramuscular injection of 300 microg of midazolam at 16 h intervals for ten days, the drug was detectable in bone tissue samples obtained from skeletonized remains buried in soil at room temperature for three weeks.

  4. Natural-based nanocomposites for bone tissue engineering and regenerative medicine: a review.

    Science.gov (United States)

    Pina, Sandra; Oliveira, Joaquim M; Reis, Rui L

    2015-02-18

    Tissue engineering and regenerative medicine has been providing exciting technologies for the development of functional substitutes aimed to repair and regenerate damaged tissues and organs. Inspired by the hierarchical nature of bone, nanostructured biomaterials are gaining a singular attention for tissue engineering, owing their ability to promote cell adhesion and proliferation, and hence new bone growth, compared with conventional microsized materials. Of particular interest are nanocomposites involving biopolymeric matrices and bioactive nanosized fillers. Biodegradability, high mechanical strength, and osteointegration and formation of ligamentous tissue are properties required for such materials. Biopolymers are advantageous due to their similarities with extracellular matrices, specific degradation rates, and good biological performance. By its turn, calcium phosphates possess favorable osteoconductivity, resorbability, and biocompatibility. Herein, an overview on the available natural polymer/calcium phosphate nanocomposite materials, their design, and properties is presented. Scaffolds, hydrogels, and fibers as biomimetic strategies for tissue engineering, and processing methodologies are described. The specific biological properties of the nanocomposites, as well as their interaction with cells, including the use of bioactive molecules, are highlighted. Nanocomposites in vivo studies using animal models are also reviewed and discussed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Multi-temporal MRI carpal bone volumes analysis by principal axes registration

    Science.gov (United States)

    Ferretti, Roberta; Dellepiane, Silvana

    2016-03-01

    In this paper, a principal axes registration technique is presented, with the relevant application to segmented volumes. The purpose of the proposed registration is to compare multi-temporal volumes of carpal bones from Magnetic Resonance Imaging (MRI) acquisitions. Starting from the study of the second-order moment matrix, the eigenvectors are calculated to allow the rotation of volumes with respect to reference axes. Then the volumes are spatially translated to become perfectly overlapped. A quantitative evaluation of the results obtained is carried out by computing classical indices from the confusion matrix, which depict similarity measures between the volumes of the same organ as extracted from MRI acquisitions executed at different moments. Within the medical field, the way a registration can be used to compare multi-temporal images is of great interest, since it provides the physician with a tool which allows a visual monitoring of a disease evolution. The segmentation method used herein is based on the graph theory and is a robust, unsupervised and parameters independent method. Patients affected by rheumatic diseases have been considered.

  6. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing.

    Science.gov (United States)

    Fedorovich, Natalja E; De Wijn, Joost R; Verbout, Abraham J; Alblas, Jacqueline; Dhert, Wouter J A

    2008-01-01

    Organ or tissue printing, a novel approach in tissue engineering, creates layered, cell-laden hydrogel scaffolds with a defined three-dimensional (3D) structure and organized cell placement. In applying the concept of tissue printing for the development of vascularized bone grafts, the primary focus lies on combining endothelial progenitors and bone marrow stromal cells (BMSCs). Here we characterize the applicability of 3D fiber deposition with a plotting device, Bioplotter, for the fabrication of spatially organized, cell-laden hydrogel constructs. The viability of printed BMSCs was studied in time, in several hydrogels, and extruded from different needle diameters. Our findings indicate that cells survive the extrusion and that their subsequent viability was not different from that of unprinted cells. The applied extrusion conditions did not affect cell survival, and BMSCs could subsequently differentiate along the osteoblast lineage. Furthermore, we were able to combine two distinct cell populations within a single scaffold by exchanging the printing syringe during deposition, indicating that this 3D fiber deposition system is suited for the development of bone grafts containing multiple cell types.

  7. Maxillary sinus floor elevation with a tissue-engineered bone composite of deciduous tooth stem cells and calcium phosphate cement in goats.

    Science.gov (United States)

    Zhao, Wei; Lu, Jia-Yu; Hao, Yong-Ming; Cao, Chun-Hua; Zou, De-Rong

    2017-01-01

    The study aimed to assess the effect of maxillary sinus floor elevation with tissue-engineered bone constructed from deciduous tooth stem cells (DTSCs) and calcium phosphate cement (CPC). The stem cells from goat deciduous teeth (SGDs) were isolated and transfected by means of the adenovirus with an enhanced green fluorescent protein gene (AdEGFP). As many as 18 bilateral maxillary sinuses of nine goats were randomly allocated into three groups (n = 6/group): group A (SGDs-CPC compound), group B (CPC alone) and group C (autogenous bone obtained from an iliac crest). All the samples were evaluated by computed tomography (CT), histology and histomorphometric analysis. Furthermore, the fate of implanted SGDs was traced using an immunohistochemical staining method in the decalcified samples. SGDs might be differentiated into osteoblasts in an osteogenic medium. In the present study, three-dimensional CT analysis showed that the volume of newly formed bone in group A was greater than that in the other two groups. After a healing period of 3 months, sequential analyses of triad-colour fluorescence labelling, histology and histomorphology indicated that the SGDs-CPC compound primarily promoted bone formation and mineralization at 2 and 3 months after the operation. Moreover, the areas of new bone formation in elevated sinuses were 41.82 ± 6.24% in the SGDs-CPC group, which was significantly higher than the 30.11 ± 8.05% in the CPC-alone group or the 23.07 ± 10.21% in the autogenous bone group. Immunohistochemical staining revealed that GFP and OCN were both expressed in the new bone tissue for the samples with eGFP, which suggested that the implanted SGDs might have contributed to new bone formation on the elevated sinus floor. SGDs can promote new bone formation and maturation in the goat maxillary sinus, and the tissue-engineered bone composite of SGDs and CPC might be a potential substitute for existing maxillary sinus floor elevation methods

  8. Characteristics of Bone Tissue and Composite Materials on the Basis of Natural Hydroxyapatite and Endodontic Cement for Replacement of the Tissue

    Science.gov (United States)

    Filipenkov, V. V.; Rupeks, L. E.; Vitins, V. M.; Knets, I. V.; Kasyanov, V. A.

    2017-07-01

    New biocomposites and the cattle bone tissue were investigated. The composites were made from an endodontic cement (EC) and natural hydroxyapatite (NHAp.) The results of experiments performed by the method of infrared spectroscopy showed that protein was removed from the heat-treated specimens of bone tissue practically completely. The structure of bone tissue before and after deproteinization and the structure of the composite materials based on NHAp and EC (with different percentage) were investigated by the method of optical microscopy. The characteristics of mechanical properties (the initial elastic modulus, breaking tensile and compressive stresses, and breaking strain) and the density and porosity of these materials were determined. The new composite materials were implanted in the live tissue of rat. Biocompatibility between the live tissue and the new biocomposites was estimated.

  9. Altered distributions of bone tissue mineral and collagen properties in women with fragility fractures.

    Science.gov (United States)

    Wang, Zhen Xiang; Lloyd, Ashley A; Burket, Jayme C; Gourion-Arsiquaud, Samuel; Donnelly, Eve

    2016-03-01

    Heterogeneity of bone tissue properties is emerging as a pot