WorldWideScience

Sample records for volume 2-g butte

  1. Study on fatigue experiment for transverse butt welds under 2G and 3G weld positions

    Directory of Open Access Journals (Sweden)

    Kang Sung-Wook

    2015-09-01

    Full Text Available Although the transverse butt weld method with ceramic backing strip has been widely used in various industrial fields for its fabricational convenience, it is rarely used in offshore industries since the fatigue strength of the weld joint has not been proved sufficiently. This study conducted fatigue tests for series of butt weld specimens with horizontal (2G and vertical (3G welding positions in order to verify the fatigue strength compared to S-N curve by DNV (Det Norske Veritas, IIW (International Institute of Welding and Eurocode 3. The difference of the 2G specimens and the 3G specimens are investigated in terms of angular distortion and the effect on the fatigue strength are analyzed.

  2. Technical considerations in harvesting and sawing defective hardwood butts

    Science.gov (United States)

    Thomas W., Jr. Church; Thomas W. Church

    1971-01-01

    How important are butt defects in hardwoods? We have no reliable estimate of the volume or value of timber lost through basal injuries. However, butt defects will be almost as important in future timber harvests as they are at present. Why? Because most butt defects are due to two causes: fire and logging. Damage from both these agents may be reduced, but it certainly...

  3. DNA typing from cigarette butts.

    Science.gov (United States)

    Watanabe, Yoshihisa; Takayama, Tomohiro; Hirata, Keiji; Yamada, Sadao; Nagai, Atsushi; Nakamura, Isao; Bunai, Yasuo; Ohya, Isao

    2003-03-01

    We performed DNA typing for D1S80, HLADQA1, TH01 and PM using the butts of 100 cigarettes that were smoked by ten different individuals (ten cigarettes per individual). The results obtained from DNA typing for D1S80 agreed with the results obtained using bloodstains in 76 cigarette butt samples. Sixteen samples produced false results, showing the loss of the longer allelic hetero-band. When examined using agarose gel electrophoresis, high-molecular weight DNA was not observed in these samples. The same results were also observed for buccal swab samples and saliva stains obtained from the same individuals. In the remaining eight cigarette butt samples, PCR products were not detected. The results obtained from DNA typing for TH01, HLADQA1 and PM agreed with the results obtained using bloodstains in 90 samples. In the remaining ten samples of a specific kind of cigarette (Marlboro), the PCR products were not detected. The extracts from the ends of the Marlboro cigarettes were stained yellow. When the DNA extracted from Marlboro cigarette butts was treated with Microcon-100 (amicon) or SizeSep 400 Span Columns (Amersham Pharmacia Biotech), PCR products could be detected. When PCR amplification was performed after adding extracts from the ends of unsmoked Marlboro cigarettes to DNA extracted from bloodstains, PCR products could not be detected. The present data indicate that the degradation of high-molecular weight DNA and the inhibition of PCR by dyes of the cigarette end should be kept in mind when performing DNA typing using cigarette ends.

  4. FIRE HAZARDS ANALYSIS - BUSTED BUTTE

    Energy Technology Data Exchange (ETDEWEB)

    R. Longwell; J. Keifer; S. Goodin

    2001-01-22

    The purpose of this fire hazards analysis (FHA) is to assess the risk from fire within individual fire areas at the Busted Butte Test Facility and to ascertain whether the DOE fire safety objectives are met. The objective, identified in DOE Order 420.1, Section 4.2, is to establish requirements for a comprehensive fire and related hazards protection program for facilities sufficient to minimize the potential for: (1) The occurrence of a fire related event. (2) A fire that causes an unacceptable on-site or off-site release of hazardous or radiological material that will threaten the health and safety of employees. (3) Vital DOE programs suffering unacceptable interruptions as a result of fire and related hazards. (4) Property losses from a fire and related events exceeding limits established by DOE. Critical process controls and safety class systems being damaged as a result of a fire and related events.

  5. R. Freeman Butts: Educational Foundations and Educational Diplomacy

    Science.gov (United States)

    Allison, John

    2014-01-01

    R. Freeman Butts was an American historian and philosopher of education who died in March 2010. This paper will investigate Butts' various roles and writings and ask the question: why is Butts important to the contemporary generation of teacher educators and teachers? This paper will argue that the breadth of Butts' work builds connections and is…

  6. R. Freeman Butts: Educational Foundations and Educational Diplomacy

    Science.gov (United States)

    Allison, John

    2014-01-01

    R. Freeman Butts was an American historian and philosopher of education who died in March 2010. This paper will investigate Butts' various roles and writings and ask the question: why is Butts important to the contemporary generation of teacher educators and teachers? This paper will argue that the breadth of Butts' work builds connections and is…

  7. Microcomputer Checks Butt-Weld Accuracy

    Science.gov (United States)

    Clisham, W.; Garner, W.; Cohen, C.; Beal, J.; Polen, R.; Lloyd, J.

    1982-01-01

    Electrical gage and microcomputer eliminate time-consuming manual measurements. Alinement and angle of plates on either side of butt weld are measured and recorded automatically by hand-held gage and desk-top microcomputer. Gage/micro-computer quickly determine whether weld is within dimensional tolerances or whether reworking is needed. Microcomputer prints out measurements while operator moves gage from point to point along weld. Out-of-tolerance measurements are marked by an asterisk on printout.

  8. Tobacco and cigarette butt consumption in humans and animals.

    Science.gov (United States)

    Novotny, Thomas E; Hardin, Sarah N; Hovda, Lynn R; Novotny, Dale J; McLean, Mary Kay; Khan, Safdar

    2011-05-01

    Discarded cigarette butts may present health risks to human infants and animals because of indiscriminate eating behaviours. Nicotine found in cigarette butts may cause vomiting and neurological toxicity; leachates of cigarette butts in aquatic environments may cause exposure to additional toxic chemicals including heavy metals, ethyl phenol and pesticide residues. This report reviews published and grey literature regarding cigarette butt waste consumption by children, pets and wildlife. Although reports of human and animal exposures number in the tens of thousands, severe toxic outcomes due to butt consumption are rare. Nonetheless, the ubiquity of cigarette butt waste and its potential for adverse effects on human and animal health warrants additional research and policy interventions to reduce the stream of these pollutants in the environment.

  9. Regulating the disposal of cigarette butts as toxic hazardous waste

    OpenAIRE

    Barnes, Richard L

    2011-01-01

    The trillions of cigarette butts generated each year throughout the world pose a significant challenge for disposal regulations, primarily because there are millions of points of disposal, along with the necessity to segregate, collect and dispose of the butts in a safe manner, and cigarette butts are toxic, hazardous waste. There are some hazardous waste laws, such as those covering used tyres and automobile batteries, in which the retailer is responsible for the proper disposal of the waste...

  10. Butt-log grade distributions for five Appalachian hardwood species

    Science.gov (United States)

    John R. Myers; Gary W. Miller; Harry V., Jr. Wiant; Joseph E. Barnard; Joseph E. Barnard

    1986-01-01

    Tree quality is an important factor in determining the market value of hardwood timber stands, but many forest inventories do not include estimates of tree quality. Butt-log grade distributions were developed for northern red oak, black oak, white oak, chestnut oak, and yellow-poplar using USDA Forest Service log grades on more than 4,700 trees in West Virginia. Butt-...

  11. Butte Sink Wildlife Management Area [Land Status Map: Index Sheet

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This map was produced by the Division of Realty to depict landownership at Butte Sink Wildlife Management Area. It was generated from rectified aerial photography,...

  12. Butte County Air Quality Management District Stationary Source Permits

    Science.gov (United States)

    U.S. EPA Public Notice: EPA is finalizing action on three permitting rules submitted as a revision to the Butte County Air Quality Management District (BCAQMD) portion of the California State Implementation Plan (SIP).

  13. Sutter Buttes-the lone volcano in California's Great Valley

    Science.gov (United States)

    Hausback, Brain P.; Muffler, L.J. Patrick; Clynne, Michael A.

    2011-01-01

    The volcanic spires of the Sutter Buttes tower 2,000 feet above the farms and fields of California's Great Valley, just 50 miles north-northwest of Sacramento and 11 miles northwest of Yuba City. The only volcano within the valley, the Buttes consist of a central core of volcanic domes surrounded by a large apron of fragmental volcanic debris. Eruptions at the Sutter Buttes occurred in early Pleistocene time, 1.6 to 1.4 million years ago. The Sutter Buttes are not part of the Cascade Range of volcanoes to the north, but instead are related to the volcanoes in the Coast Ranges to the west in the vicinity of Clear Lake, Napa Valley, and Sonoma Valley.

  14. [Even cigarette butts can impact environment and health: preliminary considerations].

    Science.gov (United States)

    Martino, Gianrocco; Gorini, Giuseppe; Chellini, Elisabetta

    2013-01-01

    In Italy, every year about 72 billion of cigarette butts are thrown away in the environment. Cigarette butts represent 50% of the wastes of urban areas (parks, roads) in the world, and 40% of Mediterranean Sea wastes. In particular, total polluting load is constituted of 1,872 Bq millions of Polonium-210, assuming 75 mBq per cigarette butt, and 1,800 tons of volatile organic compounds. As a matter of fact, according to several surveys, cigarette butts are considered by smokers and non-smokers as a common and acceptable waste in the environment. In 2008, European Union issued a Directive on wastes considering the «extended producer responsibility» (i.e., every industry is liable for costs of collection, transport and disposal of its own products). In October 2012, the Italian Parliament proposed a bill that classifies cigarette butts as special wastes in the frame of this responsibility. It could be interesting in the future to follow the legislative process of that bill in the Italian Parliament in order to show how strong it will be supported.

  15. Butt Joint Tool Status: ITER-US-LLNL-NMARTOVETSKY-01312007

    Energy Technology Data Exchange (ETDEWEB)

    Martovetsky, N N

    2007-02-01

    Butt joint tool vacuum vessel has been built at C&H Enterprise, Inc. Leak checking and loading tests were taken place at the factory. The conductor could not be pumped down better than to 500 mtorr and therefore we could not check the sealing mechanism of the seal around conductor. But the rest of the vessel, including the flat gasket, one of the difficult seals worked well, no indication of leak at sensitivity 1e-7 l*torr/sec. The load test showed fully functional system of the load mechanism. The conductors were loaded up to 2200 kgf (21560 N) and the pressure between the butts was uniform with 100% of the contact proved by pressure sensitive film. The status of the butt joint tool development is reported.

  16. Boundary for the Deadman coal zone in the Black Butte area (bbbndg.shp)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This ArcView shapefile contains a polygon representation of the Deadman coal zone in the Black Butte area of the Point of Rocks-Black Butte coalfield, Wyoming. This...

  17. Equipment for Preparing Pipeline Position Butts for Welding

    Directory of Open Access Journals (Sweden)

    Lobanov L.M.

    2015-09-01

    Full Text Available The results of developments of the Ye.O.Paton Electric Welding Institute and its specialized departments on the designing national equipment models for preparation during the assembly the edges and butt ends of pipeline position butts with the diameter from 14 up to 159 mm, repair and modernization of power engineering objects, including the power units of nuclear and heat electric stations, in chemical and machine building, at enterprises of oil-gas complex and other branches of industry are presented.

  18. 78 FR 9945 - Crow Butte Resources, Inc.; Establishment of Atomic Safety and Licensing Board

    Science.gov (United States)

    2013-02-12

    ... COMMISSION Crow Butte Resources, Inc.; Establishment of Atomic Safety and Licensing Board Pursuant to... Licensing Board (Board) is being established to preside over the following proceeding: Crow Butte Resources, Inc. (Marsland Expansion Area) This proceeding involves a request from Crow Butte Resources, Inc. to...

  19. Process development for cigarette butts recycling into cellulose pulp.

    Science.gov (United States)

    d'Heni Teixeira, Maria Betânia; Duarte, Marco Antônio B; Raposo Garcez, Loureine; Camargo Rubim, Joel; Hofmann Gatti, Thérèse; Suarez, Paulo Anselmo Ziani

    2017-02-01

    Cigarette butts, which are usually thrown on the ground or into ordinary bins, have been recognized as toxic residues since may contain cigarette contaminants and chemicals produced during combustion. Therefore, contaminants in cigarette butts can be leached by rain into surface water and thereby contaminate the environment. In Brazil, according to the National Policy on Solid Waste, all residues must be disposed of in an environmentally friendly manner. Although cigarette butts are not mentioned in the law, due to their characteristics, they may be classified as hazardous waste. At the University of Brasilia, a cellulose pulp production process from cigarette butts has been developed employing alkaline pulping. This process is presented as an alternative to environmentally friendly final disposal of this residue. During the process, a dark liquor is generated, which was found to contain lignin, carbonyls, metals, nicotine and specific tobacco nitrosamines. The dark liquor was treated by acidification to promote lignin precipitation, coagulation with chitosan and Al2(SO4)3 to remove metals and organic compounds and ozonized to oxidize resistant chemicals. The dark liquor presented a high chemical oxygen demand (COD; 29,986mg/L), which was partially removed by precipitation (20%), chitosan coagulation (66%) and ozonation (45.8%). As the remaining COD was still high, we proposed reusing the clarified effluent in alkaline pulping, which seemed to be the easiest and most efficient procedure with the lowest cost. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Impact of cigarette butt leachate on tidepool snails.

    Science.gov (United States)

    Booth, David J; Gribben, Paul; Parkinson, Kerryn

    2015-06-15

    In urban areas, cigarette butts are the most common discarded refuse articles. In marine intertidal zones, they often fall into tidepools. We tested how common intertidal molluscs were affected by butt leachate in a laboratory experiment, where snails were exposed to various leachate concentrations. Mortality was very high, with all species showing 100% mortality at the full leachate concentration (5 butts per litre and 2h soak time) after 8days. However, Austrocochlea porcata showed higher mortality than the other 2 species at lower concentrations (10%, 25%) which may affect the relative abundance of the 3 snails under different concentrations of leachate pollution. Also, sublethal effects of leachate on snail activity were observed, with greater activity of Nerita atramentosa than the other 2 species at higher concentrations, suggesting it is more resilient than the other 2 species. While human health concerns predominate with respect to smoking, we show strong lethal and sublethal (via behavioural modifications) impacts of discarded butts on intertidal organisms, with even closely-related taxa responding differently.

  1. PCR-based typing of DNA extracted from cigarette butts.

    Science.gov (United States)

    Hochmeister, M N; Budowle, B; Jung, J; Borer, U V; Comey, C T; Dirnhofer, R

    1991-01-01

    Limited genetic marker information can be obtained from saliva by typing by conventional serological means. Thus, the application of PCR-based DNA typing methods was investigated as a potential approach for typing genetic markers in saliva. DNA was isolated from 200 cigarettes smoked by 10 different individuals (20 cigarettes per individual) and from 3 cigarette butts recovered from 2 crime scenes (adjudicated cases) using a Chelex 100 extraction procedure. The amount of recovered human DNA was quantified by slot-blot analysis and ranged from approximately less than 2-160 ng DNA per cigarette butt for the 200 samples, and 8 ng, 50 ng, and 100 ng for the cigarette butts from the adjudicated cases. The DNA was successfully amplified by the polymerase chain reaction (PCR) for the HLA-DQ alpha locus (99 out of 100 samples) as well as for the variable number of tandem repeat (VNTR) locus D1S80 (99 out of 100 samples). Amplification and typing of DNA was successful on all samples recovered from the crime scenes. The results suggest that PCR-based typing of DNA offers a potential method for genetically characterizing traces of saliva on cigarette butts.

  2. Willamette Valley - Baskett Butte Oak Savannah Restoration-Phase 2

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This project is a follow-up to the 2010 project that removed three invasive tree species across 85 acres on Baskett Butte at Baskett Slough NWR. Lack of fire in the...

  3. ANSYS Simulation of Residual Strains in Butt-welded Joints

    Directory of Open Access Journals (Sweden)

    A. Atroshenko

    2014-07-01

    Full Text Available The effect of thermal-strain cycle on residual strains in thin-walled circular seams of cylindrical shells using TIG butt welds was studied. Estimates were calculated using numerical modelling. The structure was made of corrosion-resistant austenitic steels.

  4. Investigation and control of factors influencing resistance upset butt welding.

    NARCIS (Netherlands)

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in

  5. Investigation and control of factors influencing resistance upset butt welding.

    NARCIS (Netherlands)

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in producti

  6. Development of science imperative for progress: Pervez Butt

    CERN Multimedia

    2002-01-01

    Mr. Parvez Butt, chairman of the Pakistan Atomic Energy Commission, has said that development of science and technology is imperative for progress and prosperity of any country. He was addressing a meeting on "CERN Data Grid and its Application" an opportunity for learning for scientists of developing countries (1/2 page).

  7. Pressure-control purge panel for automatic butt welding

    Science.gov (United States)

    Lang, E. J.; Van Wagner, B. H.

    1969-01-01

    Modification of a purge panel for use in an automatic butt weld reduces the drop in pressure between the regulators and the weld head and tube purge fitting. The invention affects air regulators for plants, regulating circuits for pneumatic valves, and automatic welding machines.

  8. 77 FR 12106 - Kapka Butte Sno-Park Construction

    Science.gov (United States)

    2012-02-28

    ... an Environmental Impact Statement (EIS) under the National Environmental Policy Act (NEPA). DATES... Register/Vol. 74, No. 1/Friday, January 2, 2009/Notices) to develop an Environmental Impact Statement (EIS... Federal Highway Administration Kapka Butte Sno-Park Construction AGENCY: Western Federal Lands...

  9. Control of GMA Butt Joint Welding Based on Neural Networks

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2004-01-01

    in the challenging field of butt joint welding with full penetration under stochastically changing boundary conditions, e.g. major gap width variations. GMAW experiments performed on mild-steel plates (3 mm of thickness), show that high quality welds with uniform back-bead geometry are achievable for gap width...

  10. Regulating the disposal of cigarette butts as toxic hazardous waste.

    Science.gov (United States)

    Barnes, Richard L

    2011-05-01

    The trillions of cigarette butts generated each year throughout the world pose a significant challenge for disposal regulations, primarily because there are millions of points of disposal, along with the necessity to segregate, collect and dispose of the butts in a safe manner, and cigarette butts are toxic, hazardous waste. There are some hazardous waste laws, such as those covering used tyres and automobile batteries, in which the retailer is responsible for the proper disposal of the waste, but most post-consumer waste disposal is the responsibility of the consumer. Concepts such as extended producer responsibility (EPR) are being used for some post-consumer waste to pass the responsibility and cost for recycling or disposal to the manufacturer of the product. In total, 32 states in the US have passed EPR laws covering auto switches, batteries, carpet, cell phones, electronics, fluorescent lighting, mercury thermostats, paint and pesticide containers, and these could be models for cigarette waste legislation. A broader concept of producer stewardship includes EPR, but adds the consumer and the retailer into the regulation. The State of Maine considered a comprehensive product stewardship law in 2010 that is a much better model than EPR. By using either EPR or the Maine model, the tobacco industry will be required to cover the cost of collecting and disposing of cigarette butt waste. Additional requirements included in the Maine model are needed for consumers and businesses to complete the network that will be necessary to maximise the segregation and collection of cigarette butts to protect the environment.

  11. GAP WIDTH STUDY IN LASER BUTT-WELDING

    DEFF Research Database (Denmark)

    Gong, Hui; Olsen, Flemming Ove

    In this paper the maximum allowable gap width in laser butt-welding is intensively studied. The gap width study (GWS) is performed on the material of SST of W1.4401 (AISI 316) under various welding conditions, which are the gap width : 0.00-0.50 mm, the welding speed : 0.5-2.0 m/min, the laser...... to the welding speed, (2) the larger laser power leads to the bigger maximum allowable gap width and (3) the focal point position has very little influence on the maximum gap width....... power : 2 and 2.6 kW and the focal point position : 0 and -1.2 mm. Quality of all the butt welds are destructively tested according to ISO 13919-1.Influences of the variable process parameters to the maximum allowable gap width are observed as (1) the maximum gap width is inversely related...

  12. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Western Environmental Technology Office (WETO) is a multi-purpose engineering test facility located in Butte, Montana, and is managed by MSE, Inc. WETO seeks to contribute to environmental research by emphasizing projects to develop heavy metals removal and recovery processes, thermal vitrification systems, and waste minimization/pollution prevention technologies. WETO`s environmental technology research and testing activities focus on the recovery of usable resources from waste. In one of WETO`s areas of focus, groundwater contamination, water from the Berkeley Pit, located near the WETO site, is being used in demonstrations directed toward the recovery of potable water and metal from the heavy metal-bearing water. The Berkeley Pit is part of an inactive copper mine near Butte that was once part of the nation`s largest open-pit mining operation. The Pit contains approximately 25 billion gallons of Berkeley Pit groundwater and surface water containing many dissolved minerals. As part of DOE/OST`s Resource Recovery Project (RRP), technologies are being demonstrated to not only clean the contaminated water but to recover metal values such as copper, zinc, and iron with an estimated gross value of more than $100 million. When recovered, the Berkeley Pit waters could benefit the entire Butte valley with new water resources for fisheries, irrigation, municipal, and industrial use. At WETO, the emphasis is on environmental technology development and commercialization activities, which will focus on mine cleanup, waste treatment, resource recovery, and water resource management.

  13. Comparison of Residual Stress Distributions of Similar and Dissimilar Thick Butt-Weld Plates

    Science.gov (United States)

    Suzuki, Hiroshi; Katsuyama, Jinya; Morii, Yukio

    Residual stress distributions of 35 mm thick dissimilar metal butt-weld between A533B ferritic steel and Type 304 austenitic stainless steel (304SS) with Ni alloy welds and similar metal butt-weld of 304SS were measured using neutron diffraction. Effects of differences in thermal expansion coefficients (CTEs) and material strengths on the weld residual stress distributions were discussed by comparison of the residual stress distributions between the similar and dissimilar metal butt-welds. Residual stresses in the similar metal butt-weld exhibited typical distributions found in a thick butt-weld and they were distributed symmetrically on either side of the weld line. Meanwhile, asymmetric residual stress distributions were observed near the root of the dissimilar metal butt-weld, which was caused by differences in CTEs and yield strengths among both parent materials and weld metals. Transverse residual stress distribution of the dissimilar metal butt-weld was similar trend to that of the similar metal butt-weld, since effect of difference in CTEs were negligible, while magnitude of the transverse residual stress near the root depended on the yield strengths of each metal. In contrast, the normal and longitudinal residual stresses in the dissimilar metal butt-weld distributed asymmetrically on either side of weld line due to influence of differences in CTEs.

  14. Littered cigarette butts as a source of nicotine in urban waters

    Science.gov (United States)

    Roder Green, Amy L.; Putschew, Anke; Nehls, Thomas

    2014-11-01

    The effect of nicotine from littered cigarette butts on the quality of urban water resources has yet to be investigated. This two-part study addresses the spatial variation, seasonal dynamics and average residence time of littered cigarette butts in public space, as well as the release of nicotine from cigarette butts to run-off in urban areas during its residence time. Thereby, we tested two typical situations: release to standing water in a puddle and release during alternating rainfall and drying. The study took place in Berlin, Germany, a city which completely relies on its own water resources to meet its drinking water demand. Nine typical sites located in a central district, each divided into 20 plots were studied during five sampling periods between May 2012 and February 2013. The nicotine release from standardized cigarette butts prepared with a smoking machine was examined in batch and rainfall experiments. Littered cigarette butts are unevenly distributed among both sites and plots. The average butt concentration was 2.7 m-2 (SD = 0.6 m-2, N = 862); the maximum plot concentration was 48.8 butts m-2. This heterogeneity is caused by preferential littering (gastronomy, entrances, bus stops), redistribution processes such as litter removal (gastronomy, shop owners), and the increased accumulation in plots protected from mechanized street sweeping (tree pits, bicycle stands). No significant seasonal variation of cigarette butt accumulation was observed. On average, cigarette butt accumulation is characterized by a 6 days cadence due to the rhythm and effectiveness of street sweeping (mean weekly butt accumulation rate = 0.18 m-2 d-1; SD = 0.15 m-1). Once the butt is exposed to standing water, elution of nicotine occurs rapidly. Standardized butts released 7.3 mg g-1 nicotine in a batch experiment (equivalent to 2.5 mg L-1), 50% of which occurred within the first 27 min. In the rainfall experiment, the cumulative nicotine release from fifteen consecutive

  15. Butt lengths differ by area deprivation level: a field study to explore intensive smoking.

    Science.gov (United States)

    Thomson, George; Wilson, Nick; Bushell, Lisa; Al Matar, Waseem; Ball, Bridget; Chiu, Jessie; Culliford, Nicola; Gately, Callum; Gibson, Kirsty; Hudson, Jennifer; Hunt, Paul; Rangamuwa, Kanishka; Tapp, Dylan; Wickramaratne, Hasith; Young, Vanessa

    2008-05-01

    We collected cigarette butts in a range of residential areas, to assess differences in the length of unburnt tobacco in the butts, and in proportions of roll-your-own (RYO) cigarettes. Two high, two medium, and two low deprivation areas, as classified by deciles of the New Zealand Deprivation Index, were selected for the Wellington region. Collected butts were systematically classified and measured. A mixed model of analysis, treating location clusters nested within deprivation level areas as a random effect, was used to assess differences in mean length of unburnt tobacco in the butts. A total of 6,262 cigarette butts and separate filters were collected, of which 3,509 (56.0%) were measurable manufactured cigarette butts, 1,069 were unmeasurable manufactured butts, 1,450 were RYO butts, and 236 were RYO filters. The RYO butts were not measured because of the extent of their degradation. The unburnt tobacco lengths in manufactured cigarette butts were significantly shorter in the most deprived areas, relative to the least deprived areas (p = .035). Deformed manufactured cigarette butts (i.e., that potentially were stubbed out) showed the same pattern (p = .011 between the most and least deprived areas). We found no significant difference between deprivation areas in the proportion of RYO material found. The shorter mean unburnt tobacco length in the most deprived areas is consistent with more intensive smoking among smokers in those areas. This finding is consistent with other evidence of increased price sensitivity among poorer smokers, and with basic economic theory. Further evidence on observed smoking behavior in the field is necessary to better interpret these preliminary findings.

  16. Development of Full Automatic Flash Butt Welding with Digital Control

    Institute of Scientific and Technical Information of China (English)

    WANG Rui; SUN Hexu; WANG Hongwen

    2006-01-01

    The hardware and software design of two digital control systems based on 80C196KB MCU for flash butt welder is introduced in this paper. The welding power supply is made of six-phase half-wave rectifier. The welding outer characteristic of welding machine is realized by digital PI algorithm with the voltage close-loop feedback. The flashing curve is finished by electric-hydraulic servo valve .The process control system transfers datum with power supply system by a serial communication interface. The parameters of the control systems are collected by photoelectrical seclusion to avoid the disturbing of the electromagnetism in welding process.

  17. Acute fatal pericardial effusion induced by accidental ingestion of cigarette butts in a dog.

    Science.gov (United States)

    Kim, Jung-Hyun; Lim, Jae-Hyun

    2016-02-01

    A dog was referred for collapse and tachypnea after ingesting cigarette butts. Thoracic radiography and echocardiography indicated pericardial effusion, and an electrocardiogram showed tachycardia, variable QRS complexes, and ventricular premature complexes. This is the first description of fatal pericardial effusion associated with cigarette butt ingestion in a veterinary patient.

  18. 33 CFR 208.22 - Twin Buttes Dam and Reservoir, Middle and South Concho Rivers, Tex.

    Science.gov (United States)

    2010-07-01

    ... ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE FLOOD CONTROL REGULATIONS § 208.22 Twin Buttes Dam..., shall operate the Twin Buttes Dam and Reservoir in the interest of flood control as follows: (a... elevation 1,969.1 (top of flood control pool) the flood control discharge facilities shall be operated...

  19. 75 FR 76025 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

    Science.gov (United States)

    2010-12-07

    ... party responded to the sunset review notice of initiation by the applicable deadline * * *'' (75 FR... COMMISSION Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States... stainless steel butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead...

  20. 75 FR 53714 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

    Science.gov (United States)

    2010-09-01

    ... imports of stainless steel butt-weld pipe fittings from Japan (53 FR 9787). On February 23, 1993, Commerce... on imports of stainless steel butt-weld pipe fittings from Japan, Korea, and Taiwan (65 FR 11766... Japan, Korea, and Taiwan (70 FR 61119). The Commission is now conducting third reviews to...

  1. Optimization of laser butt welding parameters with multiple performance characteristics

    Science.gov (United States)

    Sathiya, P.; Abdul Jaleel, M. Y.; Katherasan, D.; Shanmugarajan, B.

    2011-04-01

    This paper presents a study carried out on 3.5 kW cooled slab laser welding of 904 L super austenitic stainless steel. The joints have butts welded with different shielding gases, namely argon, helium and nitrogen, at a constant flow rate. Super austenitic stainless steel (SASS) normally contains high amount of Mo, Cr, Ni, N and Mn. The mechanical properties are controlled to obtain good welded joints. The quality of the joint is evaluated by studying the features of weld bead geometry, such as bead width (BW) and depth of penetration (DOP). In this paper, the tensile strength and bead profiles (BW and DOP) of laser welded butt joints made of AISI 904 L SASS are investigated. The Taguchi approach is used as a statistical design of experiment (DOE) technique for optimizing the selected welding parameters. Grey relational analysis and the desirability approach are applied to optimize the input parameters by considering multiple output variables simultaneously. Confirmation experiments have also been conducted for both of the analyses to validate the optimized parameters.

  2. Butt-welding Residual Stress of Heat Treatable Aluminum Alloys

    Institute of Scientific and Technical Information of China (English)

    C.M. Cheng

    2007-01-01

    This study, taking three types of aluminum alloys 2024-T351, 6061-T6 and 7075-T6 as experimental materials, conducted single V-groove GTAW (gas tungsten arc welding) butt-welding to analyze and compare the magnitude and differences of residual stress in the three aluminum alloys at different single V-groove angles and in restrained or unrestrained conditions. The results show that the larger the grooving angle of butt joint, the higher the residual tensile stress. Too small grooving angle will lead to dramatic differences due to the amount of welding bead filler metal and pre-set joint geometry. Therefore, only an appropriate grooving angle can reduce residual stress. While welding, weldment in restrained condition will lead to a larger residual stress. Also, a residual stress will arise from the restraint position. The ultimate residual stress of weldment is determined by material yield strength at equilibrium temperature. The higher the yield strength at equilibrium temperature, the higher the material residual stress. Because of its larger thermal conductivity, aluminum alloy test specimens have small temperature differential. Therefore, the residual tensile stress of all materials is lower than their yield strength.

  3. Quantitative analysis of the DNA distribution on cigarette butt filter paper.

    Science.gov (United States)

    Casey, Lisa; Engen, Sarah; Frank, Greg

    2013-03-01

    The distribution of DNA on the filter paper of smoked cigarette butts was quantitatively mapped using real-time quantitative polymerase chain reaction. The filter papers from smoked cigarette butts collected from indoor and outdoor sources were sliced into equal pieces and the amount of DNA on each slice was determined. This study found that the cigarette butt filter papers sliced parallel to the seam of the cigarette had more uniformly distributed DNA on the slices and in most cases, there was enough DNA on each slice to obtain a complete DNA profile. The perpendicular slices had a less uniform pattern of distribution and some slices did not have enough DNA to obtain an interpretable DNA profile. Cigarette butts found indoors also had more DNA per cigarette on average than cigarette butts found outdoors.

  4. 75 FR 60804 - Notice of Availability of the Final Environmental Impact Statement for the West Butte Wind Power...

    Science.gov (United States)

    2010-10-01

    ... Butte Wind Power Right-of-Way, Crook and Deschutes Counties, OR AGENCY: Bureau of Land Management... prepared a Final Environmental Impact Statement (EIS) for the West Butte Wind Power Right-of-Way and by... Federal Register notice. FOR FURTHER INFORMATION CONTACT: Steve Storo, BLM West Butte Wind Power Right of...

  5. A comparison of electronic and traditional cigarette butt leachate on the development of Xenopus laevis embryos.

    Science.gov (United States)

    Parker, Tatiana Tatum; Rayburn, James

    2017-01-01

    Potential developmental toxicities of three different cigarette butt leachates were evaluated using the frog embryo teratogenesis assay-Xenopus (FETAX). Xenopus laevis embryos were exposed to regular cigarette butt (RCB), menthol (MCB) and electronic (ECB) in concentrations ranging from 0 to 4 butts/l for RCB and MCB and 0-10 butts/l for ECB. The embryos were from stage 8 to 11 and were exposed for a 96-h period in static renewal test conditions. Median lethal concentration (LC50), malformation (EC50), non-observed adverse effect concentration (NOAEC), and lowest observed adverse effect concentration (LOAEC) were calculated. Results from these studies suggest that each tested leachate is teratogenic for X. laevis embryos. The lowest LC50 was determined for ECB exposure at 17.9 cigarette butts/L. The LC50 value was the highest with RCB and MCB having LC50 s of approximately 1 cigarette butt/L. There were notable EC50 differences with RCB having the highest and ECB the lowest. The NOAEC and LOAEC levels for RCB and MCB were below 1 cigarette butt/L for both mortality and malformations; over 8 butts/L for ECB mortality and over 4 butts/L for malformations. From these results, we conclude that RCB leachate is the most toxic compound, while MCB leachate has the higher teratogenicity. ECB leachate has the lowest toxic and teratogenic effects on embryos but there were still noticeable effects. The results confirmed that the FETAX assay can be useful in an integrated biological hazard assessment for the preliminary screening for ecological risks of cigarette butts, and electronic cigarettes, in aquatic environment.

  6. Monogenetic volcanoes fed by interconnected dikes and sills in the Hopi Buttes volcanic field, Navajo Nation, USA

    Science.gov (United States)

    Muirhead, James D.; Van Eaton, Alexa R.; Re, Giuseppe; White, James D. L.; Ort, Michael H.

    2016-01-01

    Although monogenetic volcanic fields pose hazards to major cities worldwide, their shallow magma feeders (volcanic field, Arizona, to shed light on the nature of its magma feeder system. Shallow exposures reveal a transition zone between intrusion and eruption within 350 m of the syn-eruptive surface. Using a combination of field- and satellite-based observations, we have identified three types of shallow magma systems: (1) dike-dominated, (2) sill-dominated, and (3) interconnected dike-sill networks. Analysis of vent alignments using the pyroclastic massifs and other eruptive centers (e.g., maar-diatremes) shows a NW-SE trend, parallel to that of dikes in the region. We therefore infer that dikes fed many of the eruptions. Dikes are also observed in places transforming to transgressive (ramping) sills. Estimates of the observable volume of dikes (maximum volume of 1.90 × 106 m3) and sills (minimum volume of 8.47 × 105 m3) in this study reveal that sills at Hopi Buttes make up at least 30 % of the shallow intruded volume (∼2.75 × 106 m3 total) within 350 m of the paeosurface. We have also identified saucer-shaped sills, which are not traditionally associated with monogenetic volcanic fields. Our study demonstrates that shallow feeders in monogenetic fields can form geometrically complex networks, particularly those intruding poorly consolidated sedimentary rocks. We conclude that the Hopi Buttes eruptions were primarily fed by NW-SE-striking dikes. However, saucer-shaped sills also played an important role in modulating eruptions by transporting magma toward and away from eruptive conduits. Sill development could have been accompanied by surface uplifts on the order of decimeters. We infer that the characteristic feeder systems described here for the Hopi Buttes may underlie monogenetic fields elsewhere, particularly where magma intersects shallow, and often weak, sedimentary rocks. Results from this study support growing evidence of the

  7. Microstructure observations on butt joint composed of Nb3Sn CIC conductors

    Science.gov (United States)

    Obana, Tetsuhiro; Tokitani, Masayuki; Takahata, Kazuya; Kizu, Kaname; Murakami, Haruyuki

    2017-01-01

    To precisely evaluate a butt joint technology for the JT-60SA CS coils, microstructure observations on the butt joint composed of Nb3Sn CIC conductors were conducted using a FE-SEM. As a sample for the observations, the butt joint sample utilized in the joint resistance measurement was used. During the sample fabrication, the butt joint sample was heated up to about 920 K from room temperature for diffusion bonding after heat treatment for Nb3Sn production. Then, the sample was subjected to the cycles of electromagnetic force in the joint measurement. The observation results indicated that Nb3Sn strands and a copper sheet were butted properly at the interface of the butt joint. In addition, there were hairline cracks in the Nb3Sn layers of the strands near the interface. To investigate a cause of the crack initiation, the stresses generated in the butt joint under same conditions were analyzed using a simple model. As a result, the cracks would occur with an axial compressive stress generated by the butt joint fabrication.

  8. Development of the Butt Joint for the ITER Central Solenoid

    Energy Technology Data Exchange (ETDEWEB)

    Martovetsky, N N

    2006-08-23

    The ITER Central Solenoid (CS) requires compact and reliable joints for its Cable-in-Conduit Conductor (CICC). The baseline design is a diffusion bonded butt joint. In such a joint the mating cables are compacted to a very low void fraction in a copper sleeve and then heat treated. After the heat treatment the ends are cut, polished and aligned against each other and then diffusion bonded under high compression in a vacuum chamber at 750 C. The jacket is then welded on the conductor to complete the joint, which remarkably does not require more room than a regular conductor. This joint design is based on a proven concept developed for the ITER CS Model Coil that was successfully tested in the previous R&D phase.

  9. Remote Operations and Nightly Automation of the Red Buttes Observatory

    Science.gov (United States)

    Kasper, David H.; Ellis, Tyler G.; Yeigh, Rex R.; Kobulnicky, Henry A.; Jang-Condell, Hannah; Kelley, Mark; Bucher, Gerald J.; Weger, James S.

    2016-10-01

    We have implemented upgrades to the University of Wyoming’s Red Buttes Observatory (RBO) to allow remote and autonomous operations using the 0.6 m telescope. Detailed descriptions of hardware and software components provide sufficient information to guide upgrading similarly designed telescopes. We also give a thorough description of the automated and remote operation modes with intent to inform the construction of routines elsewhere. Because the upgrades were largely driven by the intent to perform exoplanet transit photometry, we discuss how this science informed the automation process. A sample exoplanet transit observation serves to demonstrate RBO’s capability to perform precision photometry. The successful upgrades have equipped a legacy observatory for a new generation of automated and rapid-response observations.

  10. A Neural Network Approach for GMA Butt Joint Welding

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2003-01-01

    squares has been used with the back-propagation algorithm for training the network, while a Bayesian regularization technique has been successfully applied for minimizing the risk of inexpedient over-training. Finally, a predictive closed-loop control strategy based on a so-called single-neuron self......This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...... penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least...

  11. Remote Operations and Nightly Automation of The Red Buttes Observatory

    CERN Document Server

    Kasper, David H; Yeigh, Rex R; Kobulnicky, Henry A; Jang-Condell, Hannah; Kelley, Mark; Bucher, Gerald J; Weger, James S

    2016-01-01

    We have implemented upgrades to the University of Wyoming's Red Buttes Observatory (RBO) to allow remote and autonomous operations using the 0.6 m telescope. Detailed descriptions of hardware and software components provide sufficient information to guide upgrading similarly designed telescopes. We also give a thorough description of the automated and remote operation modes with intent to inform the construction of routines elsewhere. Because the upgrades were largely driven by the intent to perform exoplanet transit photometry, we discuss how this science informed the automation process. A sample exoplanet transit observation serves to demonstrate RBO's capability to perform precision photometry. The successful upgrades have equipped a legacy observatory for a new generation of automated and rapid-response observations.

  12. Enabling Remote and Automated Operations at The Red Buttes Observatory

    Science.gov (United States)

    Ellis, Tyler G.; Jang-Condell, Hannah; Kasper, David; Yeigh, Rex R.

    2016-01-01

    The Red Buttes Observatory (RBO) is a 60 centimeter Cassegrain telescope located ten miles south of Laramie, Wyoming. The size and proximity of the telescope comfortably make the site ideal for remote and automated observations. This task required development of confidence in control systems for the dome, telescope, and camera. Python and WinSCP script routines were created for the management of science images and weather. These scripts control the observatory via the ASCOM standard libraries and allow autonomous operation after initiation.The automation tasks were completed primarily to rejuvenate an aging and underutilized observatory with hopes to contribute to an international exoplanet hunting team with other interests in potentially hazardous asteroid detection. RBO is owned and operated solely by the University of Wyoming. The updates and proprietor status have encouraged the development of an undergraduate astronomical methods course including hands-on experience with a research telescope, a rarity in bachelor programs for astrophysics.

  13. [Clarification of a break-in theft crime by multiplex PCR analysis of cigarette butts].

    Science.gov (United States)

    Hochmeister, M; Haberl, J; Borer, V; Rudin, O; Dirnhofer, R

    1995-01-01

    This paper describes the first use of multiplex PCR amplification kits for the analysis of DNA extracted from cigarette butts in a criminal case. Two suspects could be excluded as potential contributors to the samples, whereas the multi locus PCR-based DNa profile derived from the cigarette butts was consistent with a DNA profile derived from a third suspect. For identity testing in criminal cases where cigarette butts are involved, commercially available PCR amplification kits provide currently the most powerful tool. Furthermore this PCR-based analysis can be implemented into most application orientated laboratories.

  14. 75 FR 44281 - Public Land Order No. 7747; Partial Revocation, Juniper Butte Range; Idaho

    Science.gov (United States)

    2010-07-28

    ... United States Air Force in Owyhee County, Idaho for the Juniper Butte Range. This order also opens the.... 13, lot 1. The area described contains 5 acres, more or less, in Owyhee County. 2. At 9 a.m.,...

  15. True Color Orthophotography for Fossil Butte National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This photo mosaic of Fossil Butte National Monument was created from scanned 9x9s flown in 2004 in conjunction with the Vegetation Mapping Program. The photography...

  16. Spatial Vegetation Data for Fossil Butte National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This polygon feature class represents vegetation communities mapped at Fossil Butte National Monument. The polygons were generated using guidelines set by the...

  17. Field Plot and Observation Points for Fossil Butte National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This point file contains 255 point locations of field plot and observation data used by, and collected for, the vegetation mapping project for Fossil Butte National...

  18. 78 FR 21582 - Revisions to the California State Implementation Plan, Butte County Air Quality Management...

    Science.gov (United States)

    2013-04-11

    ... AGENCY 40 CFR Part 52 Revisions to the California State Implementation Plan, Butte County Air Quality Management District and Sacramento Metropolitan Air Quality Management District AGENCY: Environmental... County Air Quality Management District (BCAQMD) and Sacramento Metropolitan Air Quality...

  19. 78 FR 21540 - Revisions to the California State Implementation Plan, Butte County Air Quality Management...

    Science.gov (United States)

    2013-04-11

    ... Management District and Sacramento Metropolitan Air Quality Management District AGENCY: Environmental... revisions to the Butte County Air Quality Management District (BCAQMD) and Sacramento Metropolitan Air Quality Management District (SMAQMD) portions of the California State Implementation Plan (SIP)....

  20. Mr Parvez Butt, Chairman of the Atomic Energy Commission (PAEC), Pakistan

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    Photo 01: Mr. Parvez Butt, Chairman Pakistan Atomic Energy Commission (standing 4th from left) with his delegation and ATLAS team standing in front of the Barrel Supports manufactured in HMC3 - Pakistan.

  1. Butte Sink Wildlife Management Area [1989:Land Status Map: Sheet 1 of 2

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This map was produced by the Division of Realty to depict landownership at Butte Sink Wildlife Management Area. It was generated from rectified aerial photography,...

  2. Willamette Valley - Oregon White Oak Restoration: North Baskett Butte and Maple Knoll RNA

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This project was the initial work needed to preserve the existing oak habitat on WVNWRC by eliminating the Douglas fir overstory. North Baskett Butte, on Baskett...

  3. Measuring the performance of G2G services in Iran

    Science.gov (United States)

    Zarei, Behrouz; Safdari, Maryam

    To highlight the growth of e-government and the importance of its services it is essential to evaluate the performance of the service delivery to customers. Research indicates that traditional performance indexes are not suitable for this evaluation; moreover, it is noticeable that the e-government services are intangible and invisible. Among different e-government services, measurement of quality government to government (G2G) services has been less attractive for researchers while crucial for government policy-makers. This calls for a better understanding of the specific needs of users of these services in order to provide appropriate type and level of services that meets those needs. In this paper, the performance of the G2G services is measured in the Iranian context. For this purpose, SERVQUAL, which is a well-known method for assessing service quality, is employed. This study proposes and tests a five-factor of SERVQUAL instrument to explain user satisfaction and gap analysis, between expectations and perceptions of its customers, consisting thirty ministries and main governmental organizations. Based on a Chi-square test, factor analysis, gap analysis and correlations, it is concluded the gap between expectations and perceptions of G2G customers is significant and customer satisfaction of G2G services is at low level.

  4. Variation in, and causes of, toxicity of cigarette butts to a cladoceran and microtox.

    Science.gov (United States)

    Micevska, T; Warne, M St J; Pablo, F; Patra, R

    2006-02-01

    Cigarette butts are the most numerically frequent form of litter in the world. In Australia alone, 24-32 billion cigarette butts are littered annually. Despite this littering, few studies have been undertaken to explore the toxicity of cigarette butts in aquatic ecosystems. The acute toxicity of 19 filtered cigarette types to Ceriodaphnia cf. dubia (48-hr EC50 (immobilization)) and Vibrio fischeri (30-min EC50 (bioluminescence)) was determined using leachates from artificially smoked cigarette butts. There was a 2.9- and 8-fold difference in toxicity between the least and most toxic cigarette butts to C. cf. dubia and V. fischeri, respectively. Overall, C. cf. dubia was more inherently sensitive than V. fischeri by a factor of approximately 15.4, and the interspecies relationship between C. cf. dubia and V. fischeri was poor (R(2) = 0.07). This poor relationship indicates that toxicity data for cigarette butts for one species could not predict or model the toxicity of cigarette butts to the other species. However, the order of the toxicity of leachates can be predicted. It was determined that organic compounds caused the majority of toxicity in the cigarette butt leachates. Of the 14 organic compounds identified, nicotine and ethylphenol were suspected to be the main causative toxicants. There was a strong relationship between toxicity and tar content and between toxicity and nicotine content for two of the three brands of cigarettes (R(2 )> 0.70) for C. cf. dubia and one brand for V. fischeri. However, when the cigarettes were pooled, the relationship was weak (R(2) < 0.40) for both test species. Brand affected the toxicity to both species but more so for V. fischeri.

  5. Strength of Butt and Sharp-Cornered Joints

    Energy Technology Data Exchange (ETDEWEB)

    REEDY JR.,EARL DAVID

    2000-08-21

    There has been considerable progress in recent years towards developing a stress intensity factor-based method for predicting crack initiation at a sharp, bimaterial comer. There is now a comprehensive understanding of the nature of multi-material, two-dimensional, linear-elastic, wedge-tip stress fields. In general, the asymptotic stress state at the apex of dissimilar bonded elastic wedges (i.e. at an interface comer) can have one or more power-law singularities of differing strength and with exponents that can be real or complex. There are, however; many configurations of practical importance, (e.g. adhesively bonded butt joints, hi-material beams, etc.) where interface-comer stresses are described by one, real-valued power-law singularity. In such cases, one can reasonably hypothesize that failure occurs at a critical value of the stress intensity factor: when K{sub a}=K{sub ac}.This approach is completely analogous to LEFM except that the critical stress intensity factor is associated with a discontinuity other than a crack. To apply the K{sub ac} criterion, one must be able to accurately calculate K{sub a} for arbitrary geometries. There are several well-established methods for calculating K{sub a}. These include matching asymptotic and detailed finite element results, evaluation of a path-independent contour integral, and general finite element methods for calculating K. for complex geometries. A rapidly expanding catalog of K{sub a} calibrations is now available for a number of geometries of practical interest. These calibrations provide convenient formulas that can be used in a failure analysis without recourse to a detailed numerical analysis. The K{sub ac} criterion has been applied with some notable successes. For example, the variation in strength of adhesively bonded butt joints with bond thickness and the dependence of this relationship on adhered stiffness is readily explained. No other one-parameter fracture criterion is able to make this sort of

  6. Fatigue Properties of Welded Butt Joint and Base Metal of MB8 Magnesium Alloy

    Directory of Open Access Journals (Sweden)

    Ying-xia YU

    2016-09-01

    Full Text Available The fatigue properties of welded butt joint and base metal of MB8 magnesium alloy were investigated. The comparative fatigue tests were carried out using EHF-EM200K2-070-1A fatigue testing machine for both welded butt joint and base metal specimens with the same size and shape. The fatigue fractures were observed and analyzed by a scanning electron microscope of 6360 LA type. The experimental results show that the fatigue performance of the welded butt joint of MB8 magnesium alloy is sharply decreased. The conditional fatigue limit (1×107 of base metal and welded butt joint is about 69.41 and 32.76 MPa, respectively. The conditional fatigue limit (1×107 of the welded butt joint is 47.2 % of that of base metal. The main reasons are that the welding can lead to stress concentration in the weld toe area, tensile welding residual stress in the welded joint, as well as grain coarsening in the welding seam. The cleavage steps or quasi-cleavage patterns present on the fatigue fracture surface, indicating the fracture type of the welded butt joint belongs to a brittle fracture.DOI: http://dx.doi.org/10.5755/j01.ms.22.3.9132

  7. Critical Gap distance in Laser Butt-welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    In a number of systematic laboratory experiments the critical gap distance that results in sound beads in laser butt welding is sought identified. By grinding the edges of the sheets, a number of "reference" welds are made and compared to the sheets with shear cut edges. In the tests the gap...... was set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with a thickness of 0.75 and 1.25 mm with and without zinc coating were analysed. A total of 120 welds were made at different welding speeds.As quality norm DIN 8563 was used to divide the welds into quality classes. A number of welds...... were also x-ray photographed.Of the weld combinations analysed 80 % were of high quality and 17 % of a non-acceptable quality. 90 % of the bad welds had a gap distance larger than 0.05 mm. The results showed that 85 % of the bad welds were shear cut and only 15 % grinded. Two third of the bad welds...

  8. Developmental toxicity of cigarette butts - An underdeveloped issue.

    Science.gov (United States)

    Lee, Wenjau; Lee, Chih Chun

    2015-03-01

    Cigarette butts (CBs) littering is not just an unsightly nuisance but also a public health problem, because chemicals contained in cigarettes can leach into aquatic environments and pose a risk to the health of humans and wildlife. However, this risk is largely unrecognized or ignored by the public, and toxicological evidence of CBs is scarce. Therefore, we used medaka embryos (Oryzias latipes) to explore developmental toxicity of CBs. The embryos were exposed to various concentrations of leachates from smoked and unsmoked cigarette tobacco (ST and UST) and filters (SF and USF), and observed from 1 to 3 days post-fertilization. The images were recorded and several developmental endpoints analyzed. The values from these endpoints were then used to calculate the Integrated Biomarker Response and evaluate overall effects of the leachates. Some of the embryos were allowed to hatch, and the hatchlings were tested for anxiety-like behavior. Our results showed that low concentrations of the leachates from ST, UST, and SF raised the heart rate, accelerated development, and changed behavior, while high concentrations lowered the heart rate, suppressed development, and increased mortality. The lowest observed effect concentration for the leachates was ≤0.2piece (pc)/L. The USF leachate had no effect at the concentration of 20pc/L. Developmental toxicity of the leachates was ranked as: ST>UST>SF>USF. This study has demonstrated for the first time that CB leachates affect fish development, and provided toxicological evidence to better assess ecological impacts of CBs.

  9. Data of evolutionary structure change: 1JKCA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1JKCA-2G4NF 1JKC 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN...G HHHH - GGGG -- EVID>EVID> 0 2G4N... F 2G4NF IVQN...ation> 0.7019270062446594 1.2867070436477661 EVID...> 1 2G4N F 2G4NF

  10. Data of evolutionary structure change: 1CKCA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1CKCA-2G4NF 1CKC 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN...G HHHH -GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN...otation> 0.8009520173072815 1.4841200113296509 EVID> 1 2G4N F 2G4NF

  11. Data of evolutionary structure change: 1B7QA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1B7QA-2G4NF 1B7Q 2G4N A F KVFERCELARTLKRLGMDGYRGISLALWMCLAKWESGYN... HHHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF VQNND...tation> 1.5742559432983398 3.2563140392303467 EVI...D> 1 2G4N F 2G4NF

  12. Data of evolutionary structure change: 1DI3A-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1DI3A-2G4NF 1DI3 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN... HHHH -GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN-...> 0.6655399799346924 1.2087219953536987 EVID> 1 2G4N F 2G4NF

  13. Data of evolutionary structure change: 1B5XA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1B5XA-2G4NF 1B5X 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN...G HHHH -GGGG -- EVID>EVID> 0 2G4N F 2G4NF ELKDL...242798 2.054610013961792 4.014041900634766 ...EVID> 1 2G4N F 2G4NF

  14. Data of evolutionary structure change: 1GB7A-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1GB7A-2G4NF 1GB7 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN...HHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN--...n> 0.7096549868583679 1.3399250507354736 EVID> 1 2G4N F 2G4NF

  15. Data of evolutionary structure change: 1CKFA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1CKFA-2G4NF 1CKF 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN... HHHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN...tion> 0.7245799899101257 1.3730000257492065 EVID>... 1 2G4N F 2G4NF

  16. Data of evolutionary structure change: 1GAZA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1GAZA-2G4NF 1GAZ 2G4N A F KIFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN... HHHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN...ation> 0.6844720244407654 1.2662450075149536 EVID...> 1 2G4N F 2G4NF

  17. Data of evolutionary structure change: 1B7OA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1B7OA-2G4NF 1B7O 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESQYN... HHHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN...on> 0.7017530202865601 1.3242100477218628 EVID> 1 2G4N F 2G4NF <

  18. Data of evolutionary structure change: 1CKHA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1CKHA-2G4NF 1CKH 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN... HHHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN...0.7082120180130005 1.2645390033721924 EVID> 1 2G4N F 2G4NF

  19. Data of evolutionary structure change: 1CJ7A-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1CJ7A-2G4NF 1CJ7 2G4N A F KVFERCELARVLKRLGMDGYRGISLANWMCLAKWESGYN...G HHHH - GGGG -- EVID>EVID> 0 2G4N... F 2G4NF ELKD...274536 2.0796310901641846 4.057032108306885 ...EVID> 1 2G4N F 2G4NF

  20. Data of evolutionary structure change: 1GB5A-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1GB5A-2G4NF 1GB5 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN... HHHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN...89938545227 1.3731060028076172 EVID>EVID> 1 2G4N F 2G4NF KILDK-VG

  1. Data of evolutionary structure change: 1IWTA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1IWTA-2G4NF 1IWT 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN... - GGG HHHH -GGGG -- EVID> 0 ...2G4N F 2G4NF ... 0.7582709789276123 1.3628380298614502 EVID>...EVID> 1 2G4N F 2G4NF

  2. Data of evolutionary structure change: 1B5WA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1B5WA-2G4NF 1B5W 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN...G HHHH -GGGG -- EVID>EVID> 0 2G4N F 2G4NF ELKDL...18 2.079693078994751 4.073005199432373 EVID>...EVID> 1 2G4N F 2G4NF

  3. Data of evolutionary structure change: 1B7NA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1B7NA-2G4NF 1B7N 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWLSGYN... HHHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN...n> 0.6914700269699097 1.3510249853134155 EVID> 1 2G4N F 2G4NF

  4. Data of evolutionary structure change: 1JJ3B-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1JJ3B-2G4NF 1JJ3 2G4N B F KVFGRCELAAAMKRHGLDNYRGYSLGNWVCAAKFESNFN... HHHH - GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN...639686584473 EVID> 1 2G4N... F 2G4NF KKILD-KVGIN

  5. Data of evolutionary structure change: 1JKDA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1JKDA-2G4NF 1JKD 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN...GGG HHHH -GGGG -- EVID>EVID> 0 2G4...N F 2G4NF IVQ...tion> 0.7327640056610107 1.3976370096206665 EVID>... 1 2G4N F 2G4NF

  6. Data of evolutionary structure change: 1EQEA-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1EQEA-2G4NF 1EQE 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN...HHH -GGGG -- EVID>EVID> 0 2G4N F 2G4NF VQNND--S...rotation> 1.4860199689865112 3.0474579334259033 EVID> 1 2G4N F 2G4NF

  7. Data of evolutionary structure change: 1CJ8A-2G4NF [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1CJ8A-2G4NF 1CJ8 2G4N A F KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN... HHHH -GGGG -- EVID>EVID> 0 2G4N F 2G4NF IVQNN-...n> 0.7294750213623047 1.3636130094528198 EVID> 1 2G4N F 2G4NF

  8. Development of sensory motor reflexes in 2 G exposed rats.

    Science.gov (United States)

    Wubbels, Réne; Bouët, Valentine; de Jong, Herman; Gramsbergen, Albert

    2004-07-01

    During gestation and early postnatal development, the animal's size and weight rapidly increase. Within that period, gravity affects sensory and motor development. We studied age-dependent modifications of several types of motor reflexes in 5 groups of rats conceived, born and reared in hypergravity (HG; 2 g). These rats were transferred to normal gravity (NG; 1 g) at various postnatal days, and their behavioral reflexes were compared with a control group which was constantly kept under NG. HG induced a retarded development of vestibular dependent reflexes. Other types of motor behavior were not delayed.

  9. Mobility of Metal Tracers in Unsaturated Tuffs of Busted Butte

    Science.gov (United States)

    Groffman, A. R.

    2001-12-01

    A complex tracer mixture was injected continuously for over two years into a 10 m x 10 m x 7 m block of unsaturated tuff as part of the Busted Butte unsaturated-zone tracer test at Yucca Mountain. The test was designed to measure tracer transport within the Topopah Springs and Calico Hills tuffs, units that occur between the potential high-level nuclear waste repository at Yucca Mountain and the water table below. The mixture included nonreactive (Br, I, and fluorinated benzoic acids (FBAs)) and reactive tracers (Li, Ce, Sm, Ni, Co, and Mn). Bromide, I, FBAs, and Li were detected during the test on absorbent pads emplaced in a series of solute collection boreholes located beneath the injectors but the more strongly sorbing metals did not reach the collection boreholes during this period. To determine the distribution and mobility of these metals, tracer constituents were extracted from tuff samples collected during overcoring and mineback of the test block. Tracers were extracted from the tuff samples by leaching with a 5% nitric acid solution for metals and a bicarbonate-carbonate buffer for anions. Results from the overcore sample suite show that metals have migrated through the tuff in the region adjacent to and immediately below the tracer injectors. Consistent with laboratory sorption measurements and observed breakthrough in the collection boreholes, rock analyses showed that Li is the most mobile of the metals. Co and Ni behave similarly, traveling tens of cm from the injection sites, while Sm and Ce moved far less, possibly due to precipitation reactions in addition to sorption. Determination of Mn transport is complicated by high background concentrations in the tuff; additional background samples are currently being evaluated. As expected, our rock analyses show that the nonreactive tracers Br and FBAs have moved beyond the overcore region, corroborating results from collection boreholes.

  10. Locating PHEV Exchange Stations in V2G

    CERN Document Server

    Pan, Feng; Berscheid, Alan; Izraelevitz, David

    2010-01-01

    Plug-in hybrid electric vehicles (PHEVs) are an environmentally friendly technology that is expected to rapidly penetrate the transportation system. Renewable energy sources such as wind and solar have received considerable attention as clean power options for future generation expansion. However, these sources are intermittent and increase the uncertainty in the ability to generate power. The deployment of PHEVs in a vehicle-to-grid (V2G) system provide a potential mechanism for reducing the variability of renewable energy sources. For example, PHEV supporting infrastructures like battery exchange stations that provide battery service to PHEV customers could be used as storage devices to stabilize the grid when renewable energy production is fluctuating. In this paper, we study how to best site these stations in terms of how they can support both the transportation system and the power grid. To model this problem we develop a two-stage stochastic program to optimally locate the stations prior to the realizat...

  11. Pueblo Folklore, Landscape Phenomenology and the Visual Poetics of Fajada Butte

    Science.gov (United States)

    Carey, C.

    2009-08-01

    In the interest of reexamining the site of Fajada Butte in Chaco Canyon, this paper seeks to recontextualize discussions of its controversial spiral petroglyphs and astronomical phenomena (Sun Daggers) with reference to landscape phenomenology, visual and literary poetics, and the astronomical orientation of contemporary Pueblo ceremonial practices. The dearth of recent scholarship on Fajada Butte may have arisen from the many controversial arguments about its function from a variety of disciplinary locations including archaeology, anthropology, geology, and archeoastronomy. Via an emphasis on the physical landscape, storytelling, contemporary ceremonial practices and ancestral ties to Chaco Canyon, the Zuni and Hopi pueblos provide a context for re-examining the astronomical phenomena of Fajada Butte as a natural shrine of the of Chacoan culture and repository of an array of symbolic content.

  12. Distribution Characteristics of Weld Residual Stress on Butt Welded Dissimilar Metal Plate

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyoung Soo; Park, Chi Yong [KEPCO Research Institute, Daejeon (Korea, Republic of); Kim, Maan Won [Korea Hydro and Nuclear Power Co., Seoul (Korea, Republic of); Park, Jai Hak [Chungbuk National University, Cheongju (Korea, Republic of)

    2010-09-15

    In this study, the weld residual stress distribution at a dissimilar-metal welded plate of low alloy carbon steel and stainless steel, which are widely used in nuclear power plants, was characterized. A plate mock-up with butt welding was fabricated using SA 508 low alloy steel and Type 304 stainless steel plates and the residual stresses were measured by the X-ray diffraction method after electrolytic polishing of the plate specimen. Finite element analysis was carried out in order to simulate the butt welding of dissimilar metal plate, and the calculated weld residual stress distribution was compared with that obtained from the measured data. The characteristics of the three-dimensional residual stress distribution in a butt weld of dissimilar metal plates were investigated by comparing the measured and calculated residual stress data.

  13. Dormaier and Chester Butte 2007 Follow-up Habitat Evaluation Procedures Report.

    Energy Technology Data Exchange (ETDEWEB)

    Ashley, Paul R.

    2008-01-01

    Follow-up habitat evaluation procedures (HEP) analyses were conducted on the Dormaier and Chester Butte wildlife mitigation sites in April 2007 to determine the number of additional habitat units to credit Bonneville Power Administration (BPA) for providing funds to enhance, and maintain the project sites as partial mitigation for habitat losses associated with construction of Grand Coulee Dam. The Dormaier follow-up HEP survey generated 482.92 habitat units (HU) or 1.51 HUs per acre for an increase of 34.92 HUs over baseline credits. Likewise, 2,949.06 HUs (1.45 HUs/acre) were generated from the Chester Butte follow-up HEP analysis for an increase of 1,511.29 habitat units above baseline survey results. Combined, BPA will be credited with an additional 1,546.21 follow-up habitat units from the Dormaier and Chester Butte parcels.

  14. 77 FR 42697 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Continuation...

    Science.gov (United States)

    2012-07-20

    ... Orders: Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines, 66 FR 11257 (February 23, 2001). \\2\\ See Initiation of Five-Year (``Sunset'') Review, 76 FR 67412 (November 1, 2011... Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines, 77 FR 39735 (July 5, 2012),...

  15. 77 FR 33211 - Horse Butte Wind I LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Science.gov (United States)

    2012-06-05

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Horse Butte Wind I LLC; Supplemental Notice That Initial Market- Based Rate...-referenced proceeding of Horse Butte Wind I LLC's application for market-based rate authority, with...

  16. 76 FR 9320 - Foreign-Trade Zone 274-Butte-Silver Bow, MT; Application for Manufacturing Authority REC Silicon...

    Science.gov (United States)

    2011-02-17

    ... Authority REC Silicon (Polysilicon and Silane Gas) Butte, MT An application has been submitted to the..., requesting manufacturing authority on behalf of REC Silicon, located in Butte, Montana. The application was... regulations of the Board (15 CFR part 400). It was formally filed on February 11, 2011. The REC...

  17. Ingestion of cigarettes and cigarette butts by children--Rhode Island, January 1994-July 1996 .

    Science.gov (United States)

    1997-02-14

    During 1995, the American Association of Poison Control Centers (AAPCC) received 7917 reports of potentially toxic exposures to tobacco products among children aged cigars. Acute nicotine poisoning is characterized by rapid onset of symptoms that may be severe when large amounts have been ingested. During January 1994-July 1996, the Rhode Island Poison Control Center (RIPCC) received 146 reports of ingestion of products containing nicotine by children aged cigarette butts among children aged cigarette butts by children aged < or = 6 years resulted in minor toxic effects and occurred more frequently in households where smoking was permitted in the presence of children and where cigarettes and cigarette wastes were accessible to children.

  18. Multiple crack propagation by DBEM in a riveted butt-joint: a simplified bidimensional approach

    Directory of Open Access Journals (Sweden)

    R. Citarella

    2016-03-01

    Full Text Available A Multi-Site Damage (MSD crack growth simulation is presented, carried out by means of Dual Boundary Element Method (DBEM, in a two-dimensional analysis of a cracked butt-joint made of aluminium 2024 T3. An equivalent crack length is proposed for an approximated 2D analysis of a 3D problem where the crack front assumes a part elliptical shape due to secondary bending effects. The assumptions made to perform such simplified bidimensional analyses are validated by comparing numerical results with experimental data, the latter obtained from a fatigue tested riveted butt-joint.

  19. Butt weld of aluminum alloy plates 6063 and LY12 by laser beam

    Science.gov (United States)

    Xia, Jin'an; Cheng, Zhaogu; Xu, Guoliang; Li, Xianqin

    2000-02-01

    By means of a transverse flow 5 kW CO2 laser with low- order mode laser beam output, 1 - 4 mm thick aluminum alloy plates 6063 and LY12 were successfully butt welded. The result shows that the butt weldability and the weld quality of the aluminum alloy plates are mainly dependent on incident laser power density, laser beam defocused distance and shielding gas. The relationship between the weld quality of the aluminum alloy plates and the welding parameters is discussed. The macrostructure and microstructure of the welded seams are analyzed. The mechanical properties of the welded seams are discussed.

  20. Bi-directional charger for swiss2G - Annual report; Bi-directional charger for swiss2G - Jahresbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schwab, M.; Baumann, P.

    2010-11-15

    This short annual report for 2010 for the Swiss Federal Office of Energy (SFOE) takes a look at a bi-directional charger that can be used in intelligent 'Smart Grid' applications. The idea is based on being able to use electric vehicles as a source of electricity to help meet peak demand for mains electricity. The swiss2G project aims to produce an electric car battery-charger that also functions as an inverter to convert the car's DC battery voltage to mains electricity. The project was started in September 2010. The report describes the aims of the project and reports on initial work done in the areas of safety, switching electronics and AC/DC conversion. National and international co-operation is noted and prospects for further work are discussed.

  1. 76 FR 43341 - Notice of Availability of the Record of Decision for the West Butte Wind Power Right-of-Way...

    Science.gov (United States)

    2011-07-20

    ... Bureau of Land Management Notice of Availability of the Record of Decision for the West Butte Wind Power... INFORMATION CONTACT: Steve Storo, BLM West Butte Wind Power Right-of-Way Project Lead: telephone (541) 416... INFORMATION: The applicant, West Butte Wind Power, LLC, filed right-of-way (ROW) application OR-065784 to...

  2. Muscle phenotypic variability in limb girdle muscular dystrophy 2 G.

    Science.gov (United States)

    Paim, Julia F; Cotta, Ana; Vargas, Antonio P; Navarro, Monica M; Valicek, Jaquelin; Carvalho, Elmano; da-Cunha, Antonio L; Plentz, Estevão; Braz, Shelida V; Takata, Reinaldo I; Almeida, Camila F; Vainzof, Mariz

    2013-06-01

    Limb girdle muscular dystrophy type 2 G (LGMD2G) is caused by mutations in the telethonin gene. Only few families were described presenting this disease, and they are mainly Brazilians. Here, we identified one additional case carrying the same common c.157C > T mutation in the telethonin gene but with an atypical histopathological muscle pattern. In a female patient with a long duration of symptoms (46 years), muscle biopsy showed, in addition to telethonin deficiency, the presence of nemaline rods, type 1 fiber predominance, nuclear internalization, lobulated fibers, and mitochondrial paracrystalline inclusions. Her first clinical signs were identified at 8 years old, which include tiptoe walking, left lower limb deformity, and frequent falls. Ambulation loss occurred at 41 years old, and now, at 54 years old, she presented pelvic girdle atrophy, winging scapula, foot deformity with incapacity to perform ankle dorsiflexion, and absent tendon reflexes. The presence of nemaline bodies could be a secondary phenomenon, possibly associated with focal Z-line abnormalities of a long-standing disease. However, these new histopathological findings, characteristic of congenital myopathies, expand muscle phenotypic variability of telethoninopathy.

  3. Critical Elements of Vehicle-to-Grid (V2G) Economics

    Energy Technology Data Exchange (ETDEWEB)

    Steward, Darlene M [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-07

    This report explores the critical elements of V2G economics. Section 2 summarizes the elements and costs of a V2G system. Section 3 describes V2G revenue-generating services and the business cases for providing these services. Section 4 notes real-world V2G applications. Section 5 lists concerns related to V2G. Section 6 concludes and summarizes V2G cost and revenue elements.

  4. Magma chamber cooling by episodic volatile expulsion as constrained by mineral vein distributions in the Butte, Montana Cu-Mo porphyry deposit

    Science.gov (United States)

    Daly, K.; Karlstrom, L.; Reed, M. H.

    2016-12-01

    The role of hydrothermal systems in the thermal evolution of magma chambers is poorly constrained yet likely significant. We analyze trends in mineral composition, vein thickness and overall volumetric fluid flux of the Butte, Montana porphyry Cu-Mo deposit to constrain the role of episodic volatile discharge in the crystallization of the source magma chamber ( 300 km3of silicic magma). An aqueous fluid sourced from injection of porphyritic dikes formed the Butte porphyry Cu network of veins. At least three separate pulses of fluid through the system are defined by alteration envelopes of [1] gray sericite (GS); [2] early-dark micaceous (EDM), pale-green sericite (PGS), and dark-green sericite (DGS); and [3] quartz-molybdenite (Qmb) and barren-quartz. Previous research using geothermometers and geobarometers has found that vein mineral composition, inferred temperatures and inferred pressures vary systematically with depth. Later fluid pulses are characterized by lower temperatures, consistent with progressive cooling of the source. We have digitized previously unused structural data from Butte area drill cores, and applied thermomechanical modeling of fluid release from the source magma chamber through time. Vein number density and vein thickness increase with depth as a clear function of mineralogy and thus primary temperature and pressure. We identify structural trends in the three fluid pulses which seem to imply time evolution of average vein characteristics. Pulses of Qmb-barren quartz and EDM-PGS-DGS (1st and 2nd in time) exhibit increasing vein number density (157 & 95 veins/50m, respectively) and thickness (300mm & 120mm, respectively) as a function of depth. EDM-PGS-DGS has a shallower peak in vein density (800m) than Qmb-barren quartz (>1600m). These data provide the basis for idealized mechanical models of hydrofractures, to predict driving pressures and to compare with existing source temperatures and total fluid volumes in order to estimate the total

  5. HABP2 G534E Variant in Papillary Thyroid Carcinoma.

    Science.gov (United States)

    Tomsic, Jerneja; Fultz, Rebecca; Liyanarachchi, Sandya; He, Huiling; Senter, Leigha; de la Chapelle, Albert

    2016-01-01

    The main nonmedullary form of thyroid cancer is papillary thyroid carcinoma (PTC) that accounts for 80-90% of all thyroid malignancies. Only 3-10% of PTC patients have a positive family history of PTC yet the familiality is one of the highest of all cancers as measured by case control studies. A handful of genes have been implicated accounting for a small fraction of this genetic predisposition. It was therefore of considerable interest that a mutation in the HABP2 gene was recently implicated in familial PTC. The present work was undertaken to examine the extent of HABP2 variant involvement in PTC. The HABP2 G534E variant (rs7080536) was genotyped in blood DNA from 179 PTC families (one affected individual per family), 1160 sporadic PTC cases and 1395 controls. RNA expression of HABP2 was tested by qPCR in RNA extracted from tumor and normal thyroid tissue from individuals that are homozygous wild-type or heterozygous for the variant. The variant was found to be present in 6.1% familial cases, 8.0% sporadic cases (2 individuals were homozygous for the variant) and 8.7% controls. The variant did not segregate with PTC in one large and 6 smaller families in which it occurred. In keeping with data from the literature and databases the expression of HABP2 was highest in the liver, much lower in 3 other tested tissues (breast, kidney, brain) but not found in thyroid. Given these results showing lack of any involvement we suggest that the putative role of variant HABP2 in PTC should be carefully scrutinized.

  6. HABP2 G534E Variant in Papillary Thyroid Carcinoma.

    Directory of Open Access Journals (Sweden)

    Jerneja Tomsic

    Full Text Available The main nonmedullary form of thyroid cancer is papillary thyroid carcinoma (PTC that accounts for 80-90% of all thyroid malignancies. Only 3-10% of PTC patients have a positive family history of PTC yet the familiality is one of the highest of all cancers as measured by case control studies. A handful of genes have been implicated accounting for a small fraction of this genetic predisposition. It was therefore of considerable interest that a mutation in the HABP2 gene was recently implicated in familial PTC. The present work was undertaken to examine the extent of HABP2 variant involvement in PTC. The HABP2 G534E variant (rs7080536 was genotyped in blood DNA from 179 PTC families (one affected individual per family, 1160 sporadic PTC cases and 1395 controls. RNA expression of HABP2 was tested by qPCR in RNA extracted from tumor and normal thyroid tissue from individuals that are homozygous wild-type or heterozygous for the variant. The variant was found to be present in 6.1% familial cases, 8.0% sporadic cases (2 individuals were homozygous for the variant and 8.7% controls. The variant did not segregate with PTC in one large and 6 smaller families in which it occurred. In keeping with data from the literature and databases the expression of HABP2 was highest in the liver, much lower in 3 other tested tissues (breast, kidney, brain but not found in thyroid. Given these results showing lack of any involvement we suggest that the putative role of variant HABP2 in PTC should be carefully scrutinized.

  7. Quantifying Littered Cigarette Butts to Measure Effectiveness of Smoking Bans to Building Perimeters

    Science.gov (United States)

    Seitz, Christopher M.; Strack, Robert W.; Orsini, Muhsin Michael; Rosario, Carrie; Haugh, Christie; Rice, Rebecca; Wyrick, David L.; Wagner, Lorelei

    2012-01-01

    Objective: The authors estimated the number of violations of a university policy that prohibited smoking within 25 ft of all campus buildings. Participants: The project was conducted by 13 student researchers from the university and a member of the local public health department. Methods: Students quantified cigarette butts that were littered in a…

  8. Characterizing butt-rot fungi on USA-affiliated islands in the western Pacific

    Science.gov (United States)

    Phil Cannon; Ned B. Klopfenstein; Robert L. Schlub; Mee-Sook Kim; Yuko Ota; Norio Sahashi; Roland J. Quitugua; John W. Hanna; Amy L. Ross-Davis; J. D. Sweeney

    2014-01-01

    Ganoderma and Phellinus are genera that commonly cause tree butt-rot on USA-affiliated islands of the western Pacific. These fungal genera can be quite prevalent, especially in older mangrove stands. Although the majority of infections caused by these fungi lead to severe rotting of the heartwood, they typically do not directly kill the living tissues of the sapwood,...

  9. Gap Width Study and Fixture Design in Laser Butt-Welding

    DEFF Research Database (Denmark)

    Gong, Hui; Olsen, Flemming Ove

    This paper discusses some practical consideration for design of a mechanical fixture, which enables to accurately measure the width of a gap between two stainless steel workpieces and to steadfastly clamp the workpieces for butt-welding with a high power CO2 laser.With such a fixture, a series...... of butt-welding experiment is successfully carried out in order to find the maximum allowable gap width in laser butt-welding. The gap width study (GWS) is performed on the material of SST of W1.4401 (AISI 316) under various welding conditions, which are the gap width : 0.00-0.50 mm, the welding speed : 0.......5-2.0 m/min, the laser power : 2 and 2.6 kW and the focal point position : 0 and -1.2 mm. Quality of all the butt welds are destructively tested according to ISO 13919-1.Influences of the variable process parameters to the maximum allowable gap width are observed as (1) the maximum gap width is inversely...

  10. Geology of the Pumpkin Buttes Area of the Powder River Basin, Campbell and Johnson Counties, Wyoming

    Science.gov (United States)

    Sharp, William Neil; White, Amos McNairy

    1956-01-01

    About 200 uranium occurrences have been examined in the Pumpkin Buttes area, Wyoming. Uranium minerals are visible at most of these places and occur in red and buff sandstone lenses in the Wasatch formation of Eocene age. The uranium minerals are disseminated in buff sandstone near red sandstone, and also occur in red sandstone in manganese oxide concretions and uraninite concretions.

  11. 77 FR 39735 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines

    Science.gov (United States)

    2012-07-05

    ...)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines Determination On the basis..., Malaysia, and the Philippines would be likely to lead to continuation or recurrence of material injury to... Pipe Fittings from Italy, Malaysia, and the Philippines: Inv. Nos. 731-TA-865-867 (Second...

  12. Gas metal arc welding of butt joint with varying gap width based on neural networks

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2005-01-01

    This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full p......-learning PSD control algorithm has been proposed....

  13. TIG-dressing of High Strength Butt Welded Connection. Part 2: Physical Testing and Modelling

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging

  14. TIG-dressing of high strength butt welded connection - Part 2: physical testing and modelling

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging

  15. TIG-dressing of high strength butt welded connection - Part 2: physical testing and modelling

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging fro

  16. TIG-dressing of High Strength Butt Welded Connection. Part 2: Physical Testing and Modelling

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging fro

  17. Cigarettes Butts and the Case for an Environmental Policy on Hazardous Cigarette Waste

    Directory of Open Access Journals (Sweden)

    Richard Barnes

    2009-05-01

    Full Text Available Discarded cigarette butts are a form of non-biodegradable litter. Carried as runoff from streets to drains, to rivers, and ultimately to the ocean and its beaches, cigarette filters are the single most collected item in international beach cleanups each year. They are an environmental blight on streets, sidewalks, and other open areas. Rather than being a protective health device, cigarette filters are primarily a marketing tool to help sell ‘safe’ cigarettes. They are perceived by much of the public (especially current smokers to reduce the health risks of smoking through technology. Filters have reduced the machine-measured yield of tar and nicotine from burning cigarettes, but there is controversy as to whether this has correspondingly reduced the disease burden of smoking to the population. Filters actually may serve to sustain smoking by making it seem less urgent for smokers to quit and easier for children to initiate smoking because of reduced irritation from early experimentation. Several options are available to reduce the environmental impact of cigarette butt waste, including developing biodegradable filters, increasing fines and penalties for littering butts, monetary deposits on filters, increasing availability of butt receptacles, and expanded public education. It may even be possible to ban the sale of filtered cigarettes altogether on the basis of their adverse environmental impact. This option may be attractive in coastal regions where beaches accumulate butt waste and where smoking indoors is increasingly prohibited. Additional research is needed on the various policy options, including behavioral research on the impact of banning the sale of filtered cigarettes altogether.

  18. Cigarettes butts and the case for an environmental policy on hazardous cigarette waste.

    Science.gov (United States)

    Novotny, Thomas E; Lum, Kristen; Smith, Elizabeth; Wang, Vivian; Barnes, Richard

    2009-05-01

    Discarded cigarette butts are a form of non-biodegradable litter. Carried as runoff from streets to drains, to rivers, and ultimately to the ocean and its beaches, cigarette filters are the single most collected item in international beach cleanups each year. They are an environmental blight on streets, sidewalks, and other open areas. Rather than being a protective health device, cigarette filters are primarily a marketing tool to help sell 'safe' cigarettes. They are perceived by much of the public (especially current smokers) to reduce the health risks of smoking through technology. Filters have reduced the machine-measured yield of tar and nicotine from burning cigarettes, but there is controversy as to whether this has correspondingly reduced the disease burden of smoking to the population. Filters actually may serve to sustain smoking by making it seem less urgent for smokers to quit and easier for children to initiate smoking because of reduced irritation from early experimentation. Several options are available to reduce the environmental impact of cigarette butt waste, including developing biodegradable filters, increasing fines and penalties for littering butts, monetary deposits on filters, increasing availability of butt receptacles, and expanded public education. It may even be possible to ban the sale of filtered cigarettes altogether on the basis of their adverse environmental impact. This option may be attractive in coastal regions where beaches accumulate butt waste and where smoking indoors is increasingly prohibited. Additional research is needed on the various policy options, including behavioral research on the impact of banning the sale of filtered cigarettes altogether.

  19. Multiple data sets converge on a geologic structural model for Glass Buttes, Oregon geothermal prospect

    Science.gov (United States)

    Walsh, P.; Martini, B.; Lide, C.; Boschmann, D.; Dilles, J. H.; Meigs, A.

    2010-12-01

    Geologic field work is being combined with multiple remote sensing and geophysical tools to model fault structure at the Glass Buttes geothermal prospect in central Oregon. Glass Buttes are a Pliocene volcanic center that sits near the junction of the Abert Rim and Brothers Fault Zones. West-northwest-striking faults, which typify the Brothers Fault Zone, bound Glass Buttes. Individual faults and fault intersections are anticipated to provide permeability for utility scale geothermal development in central Oregon. Existing temperature data reveal a maximum of 90° C measured at 600 m, with ~160° C/km bottom hole temperature gradient. High temperature surface alteration, abundant WNW-oriented faulting, and reported drilling mud losses indicate likely commercial temperatures and fracture-controlled permeability at depth. LiDAR, hyperspectral mineral mapping, and field mapping constrain near-surface structure and volcanic contacts; aeromagnetic data constrain surface to intermediate (<1000 m) structure; and gravity data constrain deeper structure (surface-2000 m). Data sets agree reasonably well in some areas, although gravity data reflect a few deep-seated faults more than the densely faulted surface structure. On the east side of the prospect, these interpreted faults trend ENE, nearly perpendicular to observed surface structures. To the north of Glass Buttes, a curvilinear gravity high and topographic low indicate that Glass Buttes sits on the southern end of a previously unidentified buried caldera or graben. Interpretation of subsurface and gravity data do not uniquely distinguish between these alternative interpretations. Exploratory drilling will target intersections of surface faults with deeper gravity-defined features.

  20. Data of evolutionary structure change: 1FKQA-2G4QA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1FKQA-2G4QA 1FKQ 2G4Q A A MEQLTKCEVFQKL--KDLKDYGGVSLPEWVCVAFHTSGYDTQA...FGRCELAAAMKRHGLDNYRGYSLGNWVCAAKFESNFNTQATNRNTDGSTDYGILQINSRWWCNDGRTPGSRNLCNIPCSALLSSDITASVNCAKKIVSDGNGMNAWVAWRNRCKGTDVQA...A 1FKQA IVQNN-DSTEY 2G4Q A 2G4QA...D> 1 1FKQ A 1FKQA

  1. Unioned layer for the Point of Rocks-Black Butte coal assessment area, Green River Basin, Wyoming (porbbfing.shp)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This ArcView shapefile contains a polygon representation of the spatial query layer for the Point of Rocks-Black Butte coalfield, Greater Green River Basin, Wyoming....

  2. What Crested Butte Mountain Resort Feels the Ski Industry Is, In General, Looking for in College Graduates.

    Science.gov (United States)

    Jernigan, Rick

    This paper describes general employment requirements for employment candidates in the skiing industry, as seen by Crested Butte Mountain Resort personnel. General educational requirements are primarily business skills, including: communications, computers, math, finance, accounting, economics, personnel administration, and psychology. Other…

  3. Crack growth analysis due to PWSCC in dissimilar metal butt weld for reactor piping considering hydrostatic and normal operating conditions

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hwee Sueng; Huh, Nam Su [Seoul Nat' l Univ., Seoul (Korea, Republic of); Lee, Seung Gun; Park, Heung Bae [KEPCO Engineering and Construction Company, Gyeonggi (Korea, Republic of); Lee, Sung Ho [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2013-01-15

    This study investigates the crack growth behavior due to primary water stress corrosion cracking (PWSCC) in the dissimilar metal butt weld of a reactor piping using Alloy 82/182. First, detailed finite element stress analyses were performed to predict the stress distribution of the dissimilar metal butt weld in which the hydrostatic and the normal operating loads as well as the weld residual stresses were considered to evaluate the stress redistribution due to mechanical loadings. Based on the stress distributions along the wall thickness of the dissimilar metal butt weld, the crack growth behavior of the postulated axial and circumferential cracks were predicted, from which the crack growth diagram due to PWSCC was proposed. The present results can be applied to predict the crack growth rate in the dissimilar metal butt weld of reactor piping due to PWSCC.

  4. Fatigue Crack Growth on Double Butt Weld with Toe Crack of Pipelines Steel

    OpenAIRE

    HADJOUI, Féthi; Benachour, Mustapha; Benguediab,Mohamed

    2012-01-01

    The welded structures have a broad applicability (car industry, aeronautical, marine, pipelines, etc.). The welding being an assembled process, presents both advantages and disadvantages. A simple existing defect after welding can generate a catastrophic fracture. This work studies the fatigue crack growth of double butt weld with toe crack. Two types of pipeline material are studied with knowing API 5L grades X60 and X70 where tension form of loading is applied. In order to p...

  5. Integrated electroabsorption-modulated DFB laser by using an improved butt-joint method

    Institute of Scientific and Technical Information of China (English)

    Baoxia Li(李宝霞); Xiaohua Hu(胡小华); Hongliang Zhu(朱洪亮); Baojun Wang(王宝军); Lingjuan Zhao(赵玲娟); Wei Wang(王圩)

    2004-01-01

    An improved butt coupling method is used to fabricate an electroabsorption modulator (EAM) monolithically integrated with a distributed feedback (DFB) laser. The obtained electroabsorption-modulated laser (EML) chip with the traditional shallow ridge exhibits very low threshold current of 12 mA, output power of more than 8 mW, and static extinction ratio of -7 dB at the applied bias voltage from 0.5 to -2.0 V.

  6. Structural architecture and glacitectonic evolution of the Mud Buttes cupola hill complex, southern Alberta, Canada

    Science.gov (United States)

    Phillips, Emrys; Evans, David J. A.; Atkinson, Nigel; Kendall, Allison

    2017-05-01

    This paper presents the results of a detailed multidisciplinary study of the deformed bedrock and overlying Quaternary sediments exposed at the Mud Buttes in southern Alberta, Canada. This large, arcuate cupola hill is composed of intensely folded and thrust sandstones, siltstones and mudstones of the Cretaceous Belly River Group. Glacitectonism responsible for the development of this internally complex landform occurred at the margin of the newly defined Prospect Valley lobe of the Laurentide Ice Sheet. Analysis of the deformation structures reveals that construction of this landform occurred in response to at least two phases of south-directed ice sheet advance separated by a period of retreat. The first phase led to the formation of a forward propagating imbricate thrust stack leading to polyphase deformation of the Belly River Group. D1 thrusting led to the detachment of thrust-bound slices of bedrock which were accreted to the base of the developing imbricate stack. This process resulted in the structurally higher and older thrust-slices being progressively ;back-rotated; (tilted), accompanied by D2 thrusting and folding. Further thrusting during D3 was restricted to the core of the Mud Buttes as the deforming sequence accommodated further compression imposed by the advancing ice. Minor oscillations of the ice margin led to localised brittle-ductile shearing (D4) of the bedrock immediately adjacent to the ice contact part of the thrust stack. The second phase of ice advance led to the accretion of a relatively simple thrust and folded sequence seen the northern side of Mud Buttes. The resulting composite thrust moraine was subsequently overridden by ice advancing from the NNW to form a dome-like cupola-hill. This readvance of the Prospect Valley lobe led to the formation of a thin carapace of Quaternary sediments mantling the Mud Buttes which include glacitectonite, till and an organic-rich clay-silt (?palaeosol).

  7. Assessment of NDE Methods to Detect Lack of Fusion in HDPE Butt Fusion Joints

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, Susan L.; Doctor, Steven R.; Cinson, Anthony D.; Watts, Michael W.; Moran, Traci L.; Anderson, Michael T.

    2011-07-31

    Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, were conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high-density polyethylene (HDPE) pipe for assessing lack of fusion. The work provided information to the United States Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high-speed tensile impact test and the side-bend test for determining joint integrity. A series of butt joints were fabricated in 3408, 12-inch (30.5-cm) IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack-of-fusion conditions. Six of these butt joints were volumetrically examined with time-of-flight diffraction (TOFD), phased-array (PA) ultrasound, and the Evisive microwave system. The outer diameter (OD) weld beads were removed for microwave evaluation and the pipes ultrasonically re-evaluated. In two of the six pipes, both the outer and inner diameter (ID) weld beads were removed and the pipe joints re-evaluated. Some of the pipes were sectioned and the joints destructively evaluated with the high-speed tensile test and the side-bend test. The fusion parameters, nondestructive and destructive evaluation results have been correlated to validate the effectiveness of what each NDE technology detects and what each does not detect. There was no single NDE method that detected all of the lack-of-fusion flaws but a combination of NDE methods did detect most of the flaws.

  8. Integrated electroabsorption-modulated DFB laser by using an improved butt-joint method

    Science.gov (United States)

    Li, Baoxia; Hu, Xiaohua; Zhu, Hongliang; Wang, Baojun; Zhao, Lingjuan; Wang, Wei

    2004-04-01

    An improved butt coupling method is used to fabricate an electroabsorption modulator (EAM) monolithically integrated with a distributed feedback (DFB) laser. The obtained electroabsorption-modulated laser (EML) chip with the traditional shallow ridge exhibits very low threshold current of 12 mA, output power of more than 8 mW, and static extinction ratio of -7 dB at the applied bias voltage from 0.5 to -2.0 V.

  9. Additional Interface Corner Toughness Data for an Adhesively-Bonded Butt Joint

    Energy Technology Data Exchange (ETDEWEB)

    Guess, T.R.; Reedy, E.D.

    1999-04-14

    Over a period of 15 months, five sets of adhesively-bonded butt joints were fabricated and tested. This previously unreported data is used to assess the variability of measured interface corner toughness values, K{sub ac}, as well as the dependence of K{sub ac} on surface preparation. A correlation between K{sub ac} and the size of the adhesive failure zone is also noted.

  10. Turning cigarette butt waste into an alternative control tool against an insecticide-resistant mosquito vector.

    Science.gov (United States)

    Dieng, Hamady; Rajasaygar, Sudha; Ahmad, Abu Hassan; Ahmad, Hamdan; Rawi, Che Salmah Md; Zuharah, Wan Fatma; Satho, Tomomitsu; Miake, Fumio; Fukumitsu, Yuki; Saad, Ahmad Ramli; Ghani, Idris Abd; Vargas, Ronald Enrique Morales; Majid, Abdul Hafiz Ab; Abubakar, Sazaly

    2013-12-01

    Annually, 4.5 trillion cigarette butts (CBs) are flicked into our environment. Evidence exists that CB waste is deadly to aquatic life, but their lethality to the aquatic life of the main dengue vector is unknown. CBs are full of toxicants that occur naturally, during planting and manufacturing, which may act as larvicidal agents. We assessed Aedes aegypti vulnerability to Marlboro butts during its development. Overall, CBs showed insecticidal activities against larvae. At early phases of development, mortality rates were much higher in two CBs solution (2CBSol) and 3CBSol microcosms (MICRs). Larval survival gradually decreased with development in 1CBSol-MICRs. However, in great presence of CBs, mortality was high even for the late developmental stages. These results suggest that A. aegypti larvae are vulnerable to CB presence in their habitats, but this effect was seen most during the early developmental phases and in the presence of increased amounts of cigarette remnants. CB filters are being used as raw material in many sectors, i.e., brick, art, fashion, plastic industries, as a practical solution to the pollution problem, the observed butt waste toxicity to mosquito larvae open new avenues for the identification of novel insecticide products.

  11. Joining of the AMC Composites Reinforced with Ti3Al Intermetallic Particles by Resistance Butt Welding

    Directory of Open Access Journals (Sweden)

    Adamiak M.

    2016-06-01

    Full Text Available The introduction of new reinforcing materials continues to be investigated to improve the final behaviour of AMCs as well as to avoid some drawbacks of using ceramics as reinforcement. The present work investigates the structure, properties and ability of joining aluminium EN-AW 6061 matrix composite materials reinforced with Ti3Al particles by resistance butt welding as well as composite materials produced by mechanical milling, powder metallurgy and hot extrusion techniques. Mechanically milled and extruded composites show finer and better distribution of reinforcement particles, which leads to better mechanical properties of the obtained products. Finer microstructure improves mechanical properties of obtained composites. The hardness increases twice in the case of mechanically milled composites also, a higher reinforcement content results in higher particle dispersion hardening, for 15 wt.% of intermetallics reinforcement concentration composites reach about 400 MPa UTS. Investigation results of joints show that best hardness and tensile properties of joints can be achieved by altering soft conditions of butt welding process e.g. current flow time 1.2 s and current 1400 A. To improve mechanical properties of butt welding joints age hardening techniques can also be used.

  12. A Demonstration System for Capturing Geothermal Energy from Mine Waters beneath Butte, Montana

    Energy Technology Data Exchange (ETDEWEB)

    Blackketter, Donald [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-06-01

    Executive Summary An innovative 50-ton ground-source heat pump (GSHP) system was installed to provide space heating and cooling for a 56,000 square foot (5,200 square meter) building in Butte Montana, in conjunction with its heating and chiller systems. Butte is a location with winter conditions much colder than the national average. The GSHP uses flooded mine waters at 78F (25C) as the heat source and heat sink. The heat transfer performance and efficiency of the system were analyzed using data from January through July 2014. This analysis indicated that for typical winter conditions in Butte, Montana, the GSHP could deliver about 88% of the building’s annual heating needs. Compared with a baseline natural-gas/electric system, the system demonstrated at least 69% site energy savings, 38% source energy savings, 39% carbon dioxide emissions reduction, and a savings of $17,000 per year (40%) in utility costs. Assuming a $10,000 per ton cost for installing a production system, the payback period at natural gas costs of $9.63/MMBtu and electricity costs of $0.08/kWh would be in the range of 40 to 50 years. At higher utility prices, or lower installation costs, the payback period would obviously be reduced.

  13. Summary of investigations of uranium deposits in the Pumpkin Buttes area, Johnson and Campbell Counties, Wyoming

    Science.gov (United States)

    Troyer, Max L.; McKay, Edward J.; Soister, Paul E.; Wallace, Stewart R.

    1954-01-01

    Uranium minerals were discovered in the Pumpkin Buttes area, Campbell and Johnson Counties, Wyo., by the U. S. Geological Survey in October 1951. From June to November 1952, an area of about 750 square miles was examined for uranium deposits, and 211 localities having abnormally high radioactivity were found; uranium minerals are visible at 121 of these localities. All known uranium mineralization in the area is restricted to sandstones of the Wasatch formation, except sparsely disseminated uranium in the sandstone of the White River formation, which caps the Pumpkin Buttes, mid several localities on the Great Pine Ridge southwest of the Pumpkin Buttes where iron-saturated sandstone and clinker in the Fort Union formation have above-normal radioactivity. The uranium occurrences in the Wasatch formation are in a red sandstone zone 450 to 900 feet above the base of the formation and are of two types: small concretionary masses of uranium, iron, manganese and vanadium minerals in sandstone, and irregular zones in which uranium minerals are disseminated in sandstone. The second type is usually larger but of lower grade than the first. Most of the localities at which uranium occurs are in a north-trending belt about 60 miles long and 18 miles in maximum width.

  14. Thermal Analysis on Butt Welded Aluminium Alloy AA7075 Plate Using FEM

    Directory of Open Access Journals (Sweden)

    M. Pal Pandi

    2014-03-01

    Full Text Available Thermo-mechanical finite element analysis has been performed to assess the residual stress in the butt weld joints of aluminium Alloy AA7075 plates by utilizing the commercial software package ABAQUS. This paper presents an efficient FE technique using equivalent load to precisely predict welding deformations and residual stresses in butt joints. The radial heat flux distribution is considered on the top surface of the weldment. Convective and radiative heat losses are taken into account through boundary conditions for the outward heat flux. Linear FE transient thermal analysis is performed using surface heat source model with Gaussian distribution to compute highest temperature in AA7075 plates. The objective of this project is to simulate the welding process by using the finite element method. After the model is built and verified, the main objective of this project is to study the effects of varying the welding process parameters on the thermo-mechanical responses. In addition to that, the aim of this research is also to find a relationship between welding parameters and the responses of single pass butt welding are evaluated through the finite element analysis. The study of this paper covers the effects of varying heat input, welding speed on the thermo-mechanical responses of the weldment after cooling down to room temperature.

  15. Residual stress analysis of an Overlay weld and a repair weld on the dissimilar Butt weld

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kang Soo, E-mail: kskim5@kaeri.re.k [Korea Atomic Energy Research Institute, 150, Dukjin-dong, Daejeon 305-353 (Korea, Republic of); Lee, Ho Jin; Lee, Bong Sang [Korea Atomic Energy Research Institute, 150, Dukjin-dong, Daejeon 305-353 (Korea, Republic of); Jung, In Chul; Park, Kwang Soo [Doosan Heavy Industries and Construction Co., 555 Gwigok Dong, Changwon 641-792 (Korea, Republic of)

    2009-12-15

    Both the experiment and FE analysis were performed to estimate the residual stresses at the parts of the dissimilar metal welds. The specimen of the dissimilar Butt welds was manufactured, and the residual stresses of this specimen were measured by the X-ray method and a Hole Drilling Technique. The values measured by two experimental methods showed a big deviation at the SUS 316L plate. Consequently, the experimental methods to estimate the residual stresses are not a superior method. The Butt FEM Model on this specimen was developed and analyzed by the ABAQUS Code. The results of the FE analysis were compared with those of the experimental methods. As a whole, the values of the Butt FEM Model showed a trend which was in agreement with the experimental values and the values of FE analysis were found reasonable. The Repair FEM Model and the Overlay FEM Model were developed and analyzed by the ABAQUS Code. The values of these results were also found reasonable data even if the experimental methods be not performed. Therefore, the residual stresses for the dissimilar metal welds can be estimated by an analysis with an appropriate FEM Model without the experimental methods.

  16. Pengaruh Konformasi Butt Shape terhadap Karakteristik Karkas Sapi Brahman Cross pada Beberapa Klasifikasi Jenis Kelamin

    Directory of Open Access Journals (Sweden)

    Harapin Hafid H

    2006-12-01

    Full Text Available Domestic demand on beef is increasing today. However the beef supply can not fulfil the demand so that importation of beef and feeder cattle is still required. Beef cattle feedloting is now growing in Indonesia. This research was done to study the growth and development of carcass components of beef carcas from Brahman Cross cattle. The number of animals used was 165 heads with the body weight range 350 – 400 kg taken from feedlot fattening. The experiment was set in completely randomized factorial design withh two factors, namely butt shape conformation (butt shape score D, C, B and sex class (heifer, steer, cow. Parameter of carcass characteristic, i.e. carcass weight, carcass percentage, loin eye area, fat thickness of ribs 12th, fat percentage of kidney, pelvic and hearth, and fat thickness of rump P8.The result of this study showed that the increase of butt shape conformation score significantly increased loin eye area, especially in heifer and cow sex class.

  17. Microstructure and Mechanical Properties of the Butt Joint in High Density Polyethylene Pipe

    Directory of Open Access Journals (Sweden)

    Pashupati Pokharel

    2016-01-01

    Full Text Available The microstructure and mechanical properties of the butt joint in high density polyethylene (HDPE pipes were evaluated by preparing the joints with increasing the cooling time from 10 s to 70 s before pressure created for fusion of the pipes. Here, cold fusion flaws in HDPE butt joint were created with increasing the cooling time around 70 s caused by the close molecular contact followed by insufficient interdiffusion of chain segments back and forth across the wetted interface. The tensile failure mechanism of the welded pipes at different fusion time was projected based on the tensile test of dog-bone shaped, fully notched bar type as well as round U-notched specimens. The mechanical properties of the joints at different fusion time were correlated with the corresponding fracture surface morphology. The weld seam as well as tensile fracture surfaces were etched using strong oxidizing agents. The crystallinity of surface etched weld zone by potassium permanganate based etchant was found higher than unetched sample due to the higher susceptibility of amorphous phase of polyethylene with oxidizing agent. The U-notched tensile test of butt welded HDPE pipe and surface etching of the weldments provided clear delineation about the joint quality.

  18. Quantification of pork belly and boston butt quality attribute preferences of South Korean customers.

    Science.gov (United States)

    Vonada, M L; Bidner, B S; Belk, K E; McKeith, F K; Lloyd, W R; O'Connor, M E; Smith, G C

    2000-10-01

    U.S. packers must have quantitative criteria for selection of pork bellies and Boston butts for export to South Korea. Pork bellies (IMPS 409A) and Boston butts (IMPS 409A, 406B, 407) were selected from normal production in a U.S. pork packing plant and transported to Seoul, South Korea, via seafreighter in refrigerated containers (frozen 0 degrees C; frozen Food Show were surveyed about their preferences for specific quality attributes of these cuts. Bellies were selected to differ in seam fat content (low = 40% extractable fat), lean color (pale = L* > 50, medium = L* 48-50, dark = L* 20% extractable fat), lean color (pale = L* > 44, medium = L* 40-42, dark = L* food show were asked to rate the displayed samples for each quality attribute on a standardized ballot. Mid-weight (3.82 kg) Boston butts that displayed Moderate or higher USDA marbling scores with moderate amounts of seam fat, Japanese lean color scores of 2 or 4, round geometric shape, and that were vacuum-packaged and transported to Korea in the freshly chilled state best characterized the quality attribute preferences of respondents. Pork bellies that exhibited moderate amounts of seam fat, Japanese lean color scores of 3, square shape, belly thickness of 3.94 cm, approximate weight of 4.04 kg, and that were vacuum-packaged and transported to Korea in the freshly chilled state best met the quality needs of South Korean customers.

  19. Data of evolutionary structure change: 1ELTA-2G4UA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ELTA-2G4UA 1ELT 2G4U A A VVGGRVAQPNSWPWQISLQYKSGSSYYHTCGGSLIRQGW...VGGTEAQRNSWPSQISLQYRSGSSWAHTCGGTLIRQNWVMTAAHCVDRELTFRVVVGEHNLNQNDGTEQYVGVQKIVVHPY...E EEEEEEEEEE EEEEEEGG HHHHHHHHH 0 1ELT... A 1ELTA

  20. Data of evolutionary structure change: 1ELTA-2G4TA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ELTA-2G4TA 1ELT 2G4T A A VVGGRVAQPNSWPWQISLQYKSGSSYYHTCGGSLIRQGW...VGGTEAQRNSWPSQISLQYRSGSSWAHTCGGTLIRQNWVMTAAHCVDRELTFRVVVGEHNLNQNDGTEQYVGVQKIVVHPY...E EEEEEEEEEEEE EEEEEEGG HHHHHHHHH 0 1ELT... A 1ELTA

  1. 76 FR 36618 - Proposed Collection; Comment Request for Form W-2G

    Science.gov (United States)

    2011-06-22

    ... Internal Revenue Service Proposed Collection; Comment Request for Form W-2G AGENCY: Internal Revenue...(c)(2)(A)). Currently, the IRS is soliciting comments concerning Form W-2G, Certain Gambling Winnings... Winnings. OMB Number: 1545-0238. Form Number: Form W-2G. Abstract: Internal Revenue Code sections...

  2. Data of evolutionary structure change: 1B7QA-2G4QA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1B7QA-2G4QA 1B7Q 2G4Q A A KVFERCELARTLKRLGMDGYRGISLALWMCLAKWESGYN...GRCELAAAMKRHGLDNYRGYSLGNWVCAAKFESNFNTQATNRNTD-GSTDYGILQINSRWWCNDGRTPGSRNLCNIPCSALLSSDITASVNCAKKIVSDGNGMNAWVAWRNRCKGTDVQA... A 2G4QA NRNTD-GSTDY 1B7Q A 1B7QA

  3. Data of evolutionary structure change: 1D6QA-2G4QA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1D6QA-2G4QA 1D6Q 2G4Q A A KVFERCELARTLKRLGMDGYRGISLANWMCLAKWESGYN...GRCELAAAMKRHGLDNYRGYSLGNWVCAAKFESNFNTQATNRNTD-GSTDYGILQINSRWWCNDGRTPGSRNLCNIPCSALLSSDITASVNCAKKIVSDGNGMNAWVAWRNRCKGTDVQA...bID> A 2G4QA NRNTD-GS...> 1D6Q A 1D6QA

  4. Initial Testing for the Recommendation of Improved Gas Metal Arc Welding Procedures for HY-80 Steel Plate Butt Joints at Norfolk Naval Shipyard

    Science.gov (United States)

    2015-12-01

    FOR THE RECOMMENDATION OF IMPROVED GAS METAL ARC WELDING PROCEDURES FOR HY-80 STEEL PLATE BUTT JOINTS AT NORFOLK NAVAL SHIPYARD by Veronika J...FOR THE RECOMMENDATION OF IMPROVED GAS METAL ARC WELDING PROCEDURES FOR HY-80 STEEL PLATE BUTT JOINTS AT NORFOLK NAVAL SHIPYARD 5. FUNDING NUMBERS 6...gas metal arc welding, submarine, hull cut, butt joint, weld, shielding gas, HY-80 steel , plate 15. NUMBER OF PAGES 53 16. PRICE CODE 17

  5. Initial testing for the recommendation of improved gas metal arc welding procedures for HY-80 steel plate butt joints at Norfolk Naval Shipyard

    OpenAIRE

    Rice, Veronika J.

    2015-01-01

    Approved for public release; distribution is unlimited Hull cut welding proficiency is an essential skill maintained by personnel at naval shipyards. This thesis explores arc weld theory to develop ideal submarine hull butt joint designs and recommends preliminary testing to be used to develop improved butt joint welding procedures at Norfolk Naval Shipyard. Pulsed gas metal arc welding (GMAW-P) is the ideal process for shipboard hull welding applications, theoretically. Butt joint samples...

  6. PLA2G16 promotes osteosarcoma metastasis and drug resistance via the MAPK pathway

    Science.gov (United States)

    Li, Lin; Liang, Shoulei; Wasylishen, Amanda R.; Zhang, Yanqin; Yang, Xueli; Zhou, Bingzheng; Shan, Luling; Han, Xiuxin; Mu, Tianyang; Wang, Guowen; Xiong, Shunbin

    2016-01-01

    The prognosis of metastatic osteosarcoma is dismal and a better understanding of the mechanisms underlying disease progression is essential to improve treatment options and patient outcomes. We previously demonstrated Pla2g16 overexpression in mouse osteosarcoma contributes to metastasis phenotypes and increased expression of PLA2G16 is associated with metastasis and poor prognosis in human tumors. To further examine the mechanisms through which PLA2G16 contributes to human osteosarcoma metastasis and explore the potential of PLA2G16 as a therapeutic target in osteosarcoma, we generated a panel of human osteosarcoma cell lines expressing different levels of PLA2G16. The functional analyses of these cell lines demonstrated high levels of PLA2G16 expression increased osteosarcoma cell migration, invasion, clonogenic survival, and anchorage-independent colony formation. Importantly, this activity was dependent on the phospholipase activity of PLA2G16. Additionally, PLA2G16 overexpression decreased the sensitivity of cells to a panel of chemotherapeutic agents. Analysis of downstream pathways revealed the pro-metastasis functions of PLA2G16 were mediated through the MAPK pathway, as knockdown of PLA2G16 decreased ERK1/2 phosphorylation and pharmacological inhibition of MEK significantly repressed PLA2G16 mediated cell migration and clonogenic survival. Furthermore, PLA2G16 overexpression promoted xenograft tumor growth in vivo, and these tumors exhibit increased ERK1/2 phosphorylation. Lastly, the expression of PLA2G16 is strongly correlated with the increased ERK1/2 phosphorylation in human osteosarcoma samples, and the combined lesions are associated with reduced overall and metastasis-free survival. Collectively, these results demonstrate increased PLA2G16 expression activates the MAPK pathway to enhance osteosarcoma metastasis and may be a novel therapeutic target for these cancers. PMID:26933804

  7. PLA2G16 promotes osteosarcoma metastasis and drug resistance via the MAPK pathway.

    Science.gov (United States)

    Li, Lin; Liang, Shoulei; Wasylishen, Amanda R; Zhang, Yanqin; Yang, Xueli; Zhou, Bingzheng; Shan, Luling; Han, Xiuxin; Mu, Tianyang; Wang, Guowen; Xiong, Shunbin

    2016-04-05

    The prognosis of metastatic osteosarcoma is dismal and a better understanding of the mechanisms underlying disease progression is essential to improve treatment options and patient outcomes. We previously demonstrated Pla2g16 overexpression in mouse osteosarcoma contributes to metastasis phenotypes and increased expression of PLA2G16 is associated with metastasis and poor prognosis in human tumors. To further examine the mechanisms through which PLA2G16 contributes to human osteosarcoma metastasis and explore the potential of PLA2G16 as a therapeutic target in osteosarcoma, we generated a panel of human osteosarcoma cell lines expressing different levels of PLA2G16. The functional analyses of these cell lines demonstrated high levels of PLA2G16 expression increased osteosarcoma cell migration, invasion, clonogenic survival, and anchorage-independent colony formation. Importantly, this activity was dependent on the phospholipase activity of PLA2G16. Additionally, PLA2G16 overexpression decreased the sensitivity of cells to a panel of chemotherapeutic agents. Analysis of downstream pathways revealed the pro-metastasis functions of PLA2G16 were mediated through the MAPK pathway, as knockdown of PLA2G16 decreased ERK1/2 phosphorylation and pharmacological inhibition of MEK significantly repressed PLA2G16 mediated cell migration and clonogenic survival. Furthermore, PLA2G16 overexpression promoted xenograft tumor growth in vivo, and these tumors exhibit increased ERK1/2 phosphorylation. Lastly, the expression of PLA2G16 is strongly correlated with the increased ERK1/2 phosphorylation in human osteosarcoma samples, and the combined lesions are associated with reduced overall and metastasis-free survival. Collectively, these results demonstrate increased PLA2G16 expression activates the MAPK pathway to enhance osteosarcoma metastasis and may be a novel therapeutic target for these cancers.

  8. Incorporation of cigarette butts into nests reduces nest ectoparasite load in urban birds: new ingredients for an old recipe?

    Science.gov (United States)

    Suárez-Rodríguez, Monserrat; López-Rull, Isabel; Garcia, Constantino Macías

    2013-02-23

    Birds are known to respond to nest-dwelling parasites by altering behaviours. Some bird species, for example, bring fresh plants to the nest, which contain volatile compounds that repel parasites. There is evidence that some birds living in cities incorporate cigarette butts into their nests, but the effect (if any) of this behaviour remains unclear. Butts from smoked cigarettes retain substantial amounts of nicotine and other compounds that may also act as arthropod repellents. We provide the first evidence that smoked cigarette butts may function as a parasite repellent in urban bird nests. The amount of cellulose acetate from butts in nests of two widely distributed urban birds was negatively associated with the number of nest-dwelling parasites. Moreover, when parasites were attracted to heat traps containing smoked or non-smoked cigarette butts, fewer parasites reached the former, presumably due to the presence of nicotine. Because urbanization changes the abundance and type of resources upon which birds depend, including nesting materials and plants involved in self-medication, our results are consistent with the view that urbanization imposes new challenges on birds that are dealt with using adaptations evolved elsewhere.

  9. Butt Welding of 2205/X65 Bimetallic Sheet and Study on the Inhomogeneity of the Properties of the Welded Joint

    Science.gov (United States)

    Gou, Ning-Nian; Zhang, Jian-Xun; Wang, Jian-Long; Bi, Zong-Yue

    2017-03-01

    The explosively welded 2205 duplex stainless steel/X65 pipe steel bimetallic sheets were butt jointed by multilayer and multi-pass welding (gas tungsten arc welding for the flyer and gas metal arc welding for the transition and parent layers of the bimetallic sheets). The microstructure and mechanical properties of the welded joint were investigated. The results showed that in the thickness direction, microstructure and mechanical properties of the welded joint exhibited obvious inhomogeneity. The microstructures of parent filler layers consisted of acicular ferrite, widmanstatten ferrite, and a small amount of blocky ferrite. The microstructure of the transition layer and flyer layer consisted of both austenite and ferrite structures; however, the transition layer of weld had a higher volume fraction of austenite. The results of the microhardness test showed that in both weld metal (WM) and heat-affected zone (HAZ) of the parent filler layers, the average hardness decreased with the increasing (from parent filler layer 1 to parent filler layer 3) welding heat input. The results of hardness test also indicated that the hardness of the WM and the HAZ for the flyer and transition layers was equivalent. The tensile test combined with Digital Specklegram Processing Technology demonstrated that the fracturing of the welded joint started at the HAZ of the flyer, and then the fracture grew toward the base metal of the parent flyer near the parent HAZ. The stratified impact test at -5 °C showed that the WM and HAZ of the flyer exhibited lower impact toughness, and the fracture mode was ductile and brittle mixed fracture.

  10. Quasi-Rayleigh waves in butt-welded thick steel plate

    Science.gov (United States)

    Kamas, Tuncay; Giurgiutiu, Victor; Lin, Bin

    2015-03-01

    This paper discusses theoretical and experimental analyses of weld guided surface acoustic waves (SAW) through the guided wave propagation (GWP) analyses. The GWP analyses have been carried out by utilizing piezoelectric wafer active sensors (PWAS) for in situ structural inspection of a thick steel plate with butt weld as the weld bead is ground flush. Ultrasonic techniques are commonly used for validation of welded structures in many in-situ monitoring applications, e.g. in off-shore structures, in nuclear and pressure vessel industries and in a range of naval applications. PWAS is recently employed in such ultrasonic applications as a resonator as well as a transducer. Quasi-Rayleigh waves a.k.a. SAW can be generated in relatively thick isotropic elastic plate having the same phase velocity as Rayleigh waves whereas Rayleigh waves are a high frequency approximation of the first symmetric (S0) and anti-symmetric (A0) Lamb wave modes. As the frequency becomes very high the S0 and the A0 wave speeds coalesce, and both have the same value. This value is exactly the Rayleigh wave speed and becomes constant along the frequency i.e. Rayleigh waves are non-dispersive guided surface acoustic waves. The study is followed with weld-GWP tests through the pitch-catch method along the butt weld line. The tuning curves of quasi-Rayleigh wave are determined to show the tuning and trapping effect of the weld bead that has higher thickness than the adjacent plates on producing a dominant quasi-Rayleigh wave mode. The significant usage of the weld tuned and guided quasi-Rayleigh wave mode is essentially discussed for the applications in the in-situ inspection of relatively thick structures with butt weld such as naval offshore structures. The paper ends with summary, conclusions and suggestions for future work.

  11. Quasi-Rayleigh waves in butt-welded thick steel plate

    Energy Technology Data Exchange (ETDEWEB)

    Kamas, Tuncay, E-mail: kamas@email.sc.edu, E-mail: victorg@sc.edu, E-mail: linbin@cec.sc.edu; Giurgiutiu, Victor, E-mail: kamas@email.sc.edu, E-mail: victorg@sc.edu, E-mail: linbin@cec.sc.edu; Lin, Bin, E-mail: kamas@email.sc.edu, E-mail: victorg@sc.edu, E-mail: linbin@cec.sc.edu [Mechanical Engineering University of South Carolina, 300 Main Str., Columbia, SC 29208 (United States)

    2015-03-31

    This paper discusses theoretical and experimental analyses of weld guided surface acoustic waves (SAW) through the guided wave propagation (GWP) analyses. The GWP analyses have been carried out by utilizing piezoelectric wafer active sensors (PWAS) for in situ structural inspection of a thick steel plate with butt weld as the weld bead is ground flush. Ultrasonic techniques are commonly used for validation of welded structures in many in-situ monitoring applications, e.g. in off-shore structures, in nuclear and pressure vessel industries and in a range of naval applications. PWAS is recently employed in such ultrasonic applications as a resonator as well as a transducer. Quasi-Rayleigh waves a.k.a. SAW can be generated in relatively thick isotropic elastic plate having the same phase velocity as Rayleigh waves whereas Rayleigh waves are a high frequency approximation of the first symmetric (S0) and anti-symmetric (A0) Lamb wave modes. As the frequency becomes very high the S0 and the A0 wave speeds coalesce, and both have the same value. This value is exactly the Rayleigh wave speed and becomes constant along the frequency i.e. Rayleigh waves are non-dispersive guided surface acoustic waves. The study is followed with weld-GWP tests through the pitch-catch method along the butt weld line. The tuning curves of quasi-Rayleigh wave are determined to show the tuning and trapping effect of the weld bead that has higher thickness than the adjacent plates on producing a dominant quasi-Rayleigh wave mode. The significant usage of the weld tuned and guided quasi-Rayleigh wave mode is essentially discussed for the applications in the in-situ inspection of relatively thick structures with butt weld such as naval offshore structures. The paper ends with summary, conclusions and suggestions for future work.

  12. Mechanical properties of friction stir butt-welded Al-5086 H32 plate

    Directory of Open Access Journals (Sweden)

    G. Çam

    2008-10-01

    Full Text Available Purpose: The purpose of the paper is to study Al-5086 H32 plates with a thickness of 3 mm friction stir butt-welded using different welding speeds at a tool rotational speed of 1600 rpm. Design/methodology/approach: The effect of welding speed on the weld performance of the joints was investigated by conducting optical microscopy, microhardness measurements and mechanical tests (i.e. tensile and bend tests. The effect of heat input during friction stir welding on the microstructure, and thus mechanical properties, of cold-rolled Al- 5086 plates was also determined.Findings: The experimental results indicated that the maximum tensile strength of the joints, which is about 75% that of the base plate, was obtained with a traverse speed of 200 mm/min at the tool rotational speed used, e.g. 1600 rpm, and the maximum bending angle of the joints can reach 180º. The maximum ductility performance of the joints was, on the other hand, relatively low, e.g. about 20%. These results are not unexpected due to the loss of the cold-work strengthening in the weld region as a result of the heat input during welding, and thus the confined plasticity within the stirred zone owing to strength undermatching. Higher joint performances can also be achieved by increasing the penetration depth of the stirring probe in butt-friction stir welding of Al-5086 H32 plates.Research limitations/implications: The results suggest that both strength and ductility performances can be increased by optimizing the tool penetration depth.Originality/value: Examination of mechanical properties of friction stir butt-welded Al-5086 H32 plate.

  13. Ischemic stroke secondary to aortic dissection following rifle butt recoil chest injury: a case report.

    Science.gov (United States)

    Rao, Mamatha; Panduranga, Prashanth; Al-Mukhaini, Mohammed; Al-Jufaili, Mahmood; Valiath, John

    2011-11-01

    Ischemic stroke secondary to aortic dissection is not uncommon. We present a patient with left hemiplegia secondary to Stanford type A aortic dissection extending to the supra-aortic vessels, which was precipitated by rifle butt recoil chest injury. The diagnosis of aortic dissection was delayed due to various factors. Finally, the patient underwent successful Bentall procedure with complete resolution of symptoms. This case emphasizes the need for caution in the use of firearms for recreation and to take precautions in preventing such incidents. In addition, this case illustrates the need for prompt cardiovascular physical examination in patients presenting with stroke.

  14. NUMERICAL SIMULATION OF TEMPERATURE FIELD ON FLASH BUTT WELDING FOR HIGH MANGANESE STEELS

    Institute of Scientific and Technical Information of China (English)

    B.D. Yu; W.D. Song; F.C. Zhang

    2005-01-01

    An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding (FBW) of frog highmanganese steel. The influence of temperature dependent material properties and the contact resistance were taken into account in FEMsimulation. Meanwhile, the lost materials due to splutter was resolved by using birth and death element. The result of analyzing data shows that the model in the FBW flashing is reasonable and feasible, and can exactly simulate the temperature field distribution. The modeling provides reference for analysis of welding technologies on the temperature field of high-manganese steel in FBW.

  15. TIG-dressing of High Strength Butt Welded Connection. Part 2: Physical Testing and Modelling

    OpenAIRE

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging from S460 to S1100 in the TIG-dressed condition. The test results are compared with modelled fatigue strength according to the notch stress theory and similar specimens in the as-welded condition. The...

  16. Synchronous Generator with HTS-2G field coils for Windmills with output power 1 MW

    Science.gov (United States)

    Kovalev, K.; Kovalev, L.; Poltavets, V.; Samsonovich, S.; Ilyasov, R.; Levin, A.; Surin, M.

    2014-05-01

    Nowadays synchronous generators for wind-mills are developed worldwide. The cost of the generator is determined by its size and weight. In this deal the implementation of HTS-2G generators is very perspective. The application of HTS 2G field coils in the rotor allows to reduce the size of the generator is 1.75 times. In this work the design 1 MW HTS-2G generator is considered. The designed 1 MW HTS-2G generator has the following parameters: rotor diameter 800 mm, active length 400 mm, phase voltage 690V, rotor speed 600 min-1 rotor field coils with HTS-2G tapes. HTS-2G field coils located in the rotating cryostat and cooled by liquid nitrogen. The simulation and optimization of HTS-2G field coils geometry allowed to increase feed DC current up to 50A. Copper stator windings are water cooled. Magnetic and electrical losses in 1 MW HTS-2G generator do not exceed 1.6% of the nominal output power. In the construction of HTS-2G generator the wave multiplier with ratio 1:40 is used. The latter allows to reduce the total mass of HTS-2G generator down to 1.5 tons. The small-scale model of HTS-2G generator with output power 50 kW was designed, manufactured and tested. The test results showed good agreement with calculation results. The manufacturing of 1 MW HTS-2G generator is planned in 2014. This work is done under support of Rosatom within the frames of Russian Project "Superconducting Industry".

  17. Improved Gas Metal Arc Welding Multi-Physics Process Model and Its Application to MIL A46100 Armor-Grade Steel Butt-welds

    Science.gov (United States)

    2014-01-01

    within the weld. Design/methodology/approach The improved GMAW process model is next applied to the case of butt-welding of MIL A46100 (a...improved GMAW process model pertaining to the spatial distribution of the material microstructure and properties within the MIL A46100 butt-weld are

  18. Flexible solution of the fixturing problem in sheet metal laser butt welding

    Science.gov (United States)

    Olsen, Flemming O.

    1994-09-01

    In 20 years laser welding of sheet metal has been demonstrated as a possible high-tech metal joining process. However, the major obstacle to the introduction of laser welding in for example car body manufacturing has been and is the fixturing problem. In case of laser butt welding of 0.5 - 1 mm thick steel sheets, the maximum acceptable gab between the sheets to be welded is in the range of 40 - 50 micrometer. Out of this demand two major problems arise: (1) the high precision required in weld preparation in terms of precise shape of the two sheets to be welded. (2) the problem of maintaining a narrow gab under welding, where thermal distortions, even though they are relatively small in this process, still will open the gap as the welding beam proceeds along the seam. In this paper a unique technique to overcome these problems will be described. The results of the experimental work described in this paper demonstrates the technique in 2D welding, where high quality butt welds has been demonstrated with virtually no clamping forces applied by utilizing a special seam preparation technique. Possibilities in car body manufacturing and other 3D sheet metal assembly by means of the flexible laser welding technique will be discussed.

  19. A Precise Visual Method for Narrow Butt Detection in Specular Reflection Workpiece Welding

    Directory of Open Access Journals (Sweden)

    Jinle Zeng

    2016-09-01

    Full Text Available During the complex path workpiece welding, it is important to keep the welding torch aligned with the groove center using a visual seam detection method, so that the deviation between the torch and the groove can be corrected automatically. However, when detecting the narrow butt of a specular reflection workpiece, the existing methods may fail because of the extremely small groove width and the poor imaging quality. This paper proposes a novel detection method to solve these issues. We design a uniform surface light source to get high signal-to-noise ratio images against the specular reflection effect, and a double-line laser light source is used to obtain the workpiece surface equation relative to the torch. Two light sources are switched on alternately and the camera is synchronized to capture images when each light is on; then the position and pose between the torch and the groove can be obtained nearly at the same time. Experimental results show that our method can detect the groove effectively and efficiently during the welding process. The image resolution is 12.5 μm and the processing time is less than 10 ms per frame. This indicates our method can be applied to real-time narrow butt detection during high-speed welding process.

  20. The microstructure of aluminum A5083 butt joint by friction stir welding

    Energy Technology Data Exchange (ETDEWEB)

    Jasri, M. A. H. M.; Afendi, M. [School of Mechatronic Engineering, Universiti Malaysia Perlis, Pauh, 02600, Arau, Perlis (Malaysia); Ismail, A. [UniKL MIMET, JalanPantaiRemis, 32200, Lumut, Perak (Malaysia); Ishak, M. [Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 02600, Pekan, Pahang (Malaysia)

    2015-05-15

    This study presents the microstructure of the aluminum A5083 butt joint surface after it has been joined by friction stir welding (FSW) process. The FSW process is a unique welding method because it will not change the chemical properties of the welded metals. In this study, MILKO 37 milling machine was modified to run FSW process on 4 mm plate of aluminum A5083 butt joint. For the experiment, variables of travel speed and tool rotational speed based on capability of machine were used to run FSW process. The concentrated heat from the tool to the aluminum plate changes the plate form from solid to plastic state. Two aluminum plates is merged to become one plate during plastic state and return to solid when concentrated heat is gradually further away. After that, the surface and cross section of the welded aluminum were investigated with a microscope by 400 x multiplication zoom. The welding defect in the FSW aluminum was identified. Then, the result was compared to the American Welding Society (AWS) FSW standard to decide whether the plate can be accepted or rejected.

  1. Numerical analysis of the heat transfer and fluid flow in the butt-fusion welding process

    Science.gov (United States)

    Yoo, Jae Hyun; Choi, Sunwoong; Nam, Jaewook; Ahn, Kyung Hyun; Oh, Ju Seok

    2017-02-01

    Butt-fusion welding is an effective process for welding polymeric pipes. The process can be simplified into two stages. In heat soak stage, the pipe is heated using a hot plate contacted with one end of the pipe. In jointing stage, a pair of heated pipes is compressed against one another so that the melt regions become welded. In previous works, the jointing stage that is highly related to the welding quality was neglected. However, in this study, a finite element simulation is conducted including the jointing stage. The heat and momentum transfer are considered altogether. A new numerical scheme to describe the melt flow and pipe deformation for the butt-fusion welding process is introduced. High density polyethylene (HDPE) is used for the material. Flow via thermal expansion of the heat soak stage, and squeezing and fountain flow of the jointing stage are well reproduced. It is also observed that curling beads are formed and encounter the pipe body. The unique contribution of this study is its capability of directly observing the flow behaviors that occur during the jointing stage and relating them to welding quality.

  2. Data of evolutionary structure change: 1DUIA-2G4VA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1DUIA-2G4VA 1DUI 2G4V A A --AKCVSYGVSQIKAPALHS-----QGYTGSNVKVAVID...H - HHHHHHHHHH EEE - 0 1DUI... A 1DUIA GTVLA----VAPSA ALA CA 375 ARG CA 304 ASN CA 261 1DUI... A 1DUIA AGNEGTSGSSSTV

  3. PLA2G16 Expression in Human Osteosarcoma Is Associated with Pulmonary Metastasis and Poor Prognosis.

    Directory of Open Access Journals (Sweden)

    Shoulei Liang

    Full Text Available Osteosarcoma is the most frequent type of malignant bone tumor in children and adolescents and is associated with a high propensity for lung metastasis. Recent experiments have indicated that PLA2G16 contributes to osteosarcoma progression and metastasis in both mouse and human osteosarcoma cell lines. The aim of this study was to compare the expression of PLA2G16 in non-metastatic and metastatic osteosarcomas to determine whether PLA2G16 expression can serve as a biomarker of osteosarcoma prognosis and metastasis.Quantitative real-time PCR was used to examine PLA2G16 mRNA in primary osteosarcoma patients (18 patients without metastases and 17 patients with metastases, and immunohistochemistry (IHC staining of PLA2G16 was performed on tissue microarrays from 119 osteosarcoma patients. Tumor metastatic behavior and survival of the patients were followed up for a minimum of 36 months and a maximum of 171 months. The prognostic value of PLA2G16 expression was evaluated by the Kaplan-Meier method and a log-rank test. Multivariate Cox regression analysis was used to identify significant independent prognostic factors.Osteosarcoma patients with metastasis showed a higher expression of PLA2G16 at both the mRNA and protein levels (both at P values< 0.05 than did patients without metastasis. Osteosarcoma patients with positive IHC staining of PLA2G16 expression at primary sites had shorter overall survival and metastasis-free survival (both at P values <0.02. Moreover, multivariate Cox analysis identified PLA2G16 expression as an independent prognostic factor to predict poor overall survival and metastasis-free survival (both P values < 0.03.This study indicated that PLA2G16 expression is a significant prognostic factor in primary osteosarcoma patients for predicting the development of metastases and poor survival.

  4. La ricerca universitaria per l’innovazione applicata al territorio: SI2G, spin off universitario

    Directory of Open Access Journals (Sweden)

    Primo Zingaretti

    2009-03-01

    Full Text Available SI2G, university spin-offSI2G is a spin-off company of Polytechnic University of Marche, built up in 2008 by a cross-curricular team belonging to the Engineer faculty. SI2G goes into business as ICT service and solution provider ranging from Remote Sensing and landscape monitoring (in particular Land Cover/Land Use mapping to up-to-date computer cartography, Web-GIS solutions and Geographic Information Systems.

  5. [The ultrasound-assisted method for the extraction of cellular elements from saliva traces left on cigarette butts].

    Science.gov (United States)

    Starovoĭtova, R A; Druchinina, I N

    2010-01-01

    Specimens for cytological studies prepared from the traces of saliva left on cigarette butts using an ultrasound bath contained 5-7 times more epithelial cells than samples obtained by the traditional method. The new technique requires much less material for the analysis. It was validated during forensic medical examination of saliva traces left on cigarette.

  6. 77 FR 10773 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Scheduling of...

    Science.gov (United States)

    2012-02-23

    ... to its notice of institution (76 FR 67473, November 1, 2011) of the subject five-year reviews was.... See 76 FR 61937 (Oct. 6, 2011) and the newly revised Commission's Handbook on E-Filing, available on... COMMISSION Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Scheduling...

  7. 77 FR 18266 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised...

    Science.gov (United States)

    2012-03-27

    ... the conduct of the expedited subject five- year reviews (77 FR 10773, February 23, 2012). The... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines;...

  8. Talent Developed: Conversations with Masters of the Arts and Sciences. Calvin Butts: Spiritual Leader and Community Activist.

    Science.gov (United States)

    Subotnik, Rena F.

    1996-01-01

    This interview with Calvin Butts III, a gifted pastor of a Baptist church in Harlem that houses the largest Protestant congregation in the United States, investigates his experiences and his views on developing academically gifted African American students, drawing talented people into the ministry, and identifying young talent. (CR)

  9. 78 FR 77165 - Notice of Availability of a Draft Environmental Impact Statement for the Monument Butte Area Oil...

    Science.gov (United States)

    2013-12-20

    ..., Federal Register a Notice of Intent to prepare an EIS (75 FR 52362). The Monument Butte Project Area (MBPA...-administered land south of Myton in Duchesne and Uintah Counties, Utah. Of the 119,743 acres within the MBPA... transportation, transmission, processing, and treatment facilities within the MBPA. The productive life of each...

  10. 76 FR 19788 - Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2011-04-08

    ... determined on January 4, 2011 that it would conduct expedited reviews (76 FR 5205). The Commission... COMMISSION Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand... fittings from Brazil, China, Japan, Taiwan, and Thailand would be likely to lead to continuation...

  11. 75 FR 60814 - Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2010-10-01

    ..., Deputy Agency Ethics Official, at 202-205-3088. Limited disclosure of business proprietary information... including antidumping duties). If you are a trade/business association, provide the information, on an... antidumping duty orders on carbon steel butt-weld pipe fittings from Brazil, China, Japan, Taiwan, and...

  12. TIG-dressing of High Strength Steel Butt Welded Connections. Part 1: Weld Toe Geometry and Local Hardness

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld t

  13. TIG-dressing of high strength steel butt welded connections - Part 1: weld toe geometry and local hardness

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld t

  14. Material flow analysis in dissimilar friction stir welding of AA2024 and Ti6Al4V butt joints

    Directory of Open Access Journals (Sweden)

    BuffaGianluca

    2016-01-01

    Full Text Available The complex material flow occurring during the weld of dissimilar AA2024 to Ti6Al4V butt and lap joints was highlighted through a dedicated numerical model able to take into account the effects of the different materials as well as the phase transformation of the used titanium alloy.

  15. A practical proposal for solving the world's cigarette butt problem: Recycling in fired clay bricks.

    Science.gov (United States)

    Mohajerani, Abbas; Kadir, Aeslina Abdul; Larobina, Luke

    2016-06-01

    The disposal and littering of cigarette butts (CBs) is a serious environmental problem. Trillions of cigarettes are produced every year worldwide, resulting in millions of tonnes of toxic waste being dumped into the environment in the form of cigarette butts. As CBs have poor biodegradability, it can take many years for them to break down. This paper reviews and presents some of the results of a study on the recycling of CBs into fired clay bricks. Bricks with 2.5%, 5%, 7.5%, and 10% CB content by weight were manufactured and tested, and then compared against control clay bricks with 0% CB content. The results showed that the dry density decreased by up to 30% and the compressive strength decreased by 88% in bricks with 10% CBs. The calculated compressive strength of bricks with 1% CBs was determined to be 19.53Mpa. To investigate the effect of mixing time, bricks with 7.5% CB content were manufactured with different mixing times of 5, 10, and 15min. To test the effect of heating time on the properties of CB bricks, the heating rate used during manufacturing was changed to 0.7, 2, 5, and 10°Cmin(-1). Bricks with 0% and 5% CB content were fired with these heating rates. Leachate tests were carried out for bricks with 0%, 2.5%, 5%, and 10% CB content. The emissions released during firing were tested for bricks with 0% and 5% CB content using heating rates of 0.7, 2, 5, and 10°Cmin(-1). The gases tested were carbon monoxide (CO), carbon dioxide (CO2), chlorine (Cl2), nitrogen oxide (NO), and hydrogen cyanide (HCN). Finally, estimations were made for the energy that could be saved by firing bricks incorporating CBs. Calculations showed that up to 58% of the firing energy could potentially be saved. Bricks were shown to be a viable solution for the disposal of CBs. They can reduce contamination caused by cigarette butts and provide a masonry construction material that can be either loadbearing or non-loadbearing, depending on the quantity of CBs incorporated. This

  16. Data of evolutionary structure change: 1AW2G-2VENA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1AW2G-2VENA 1AW2 2VEN G A --RHPVVMGNWKLNGSKEMVVDLLNGLNAELEGVTGVDV...RQLDAVINTQGVEALEGAIIAYEPIWAIGTGKAATAEDAQRIHAQIRAHIAEK-SEAVAKNVVIQYGGSVKPENAAAYFAQPDIDGALVGGAALDAKSFAAIAKAAAE... 2VEN A 2VENA1 2VEN A 2VENA A 2VENA YEPVW-----KVATP

  17. Episodic Holocene eruption of the Salton Buttes rhyolites, California, from paleomagnetic, U-Th, and Ar/Ar dating

    Science.gov (United States)

    Wright, Heather M.; Vazquez, Jorge A.; Champion, Duane E.; Calvert, Andrew T.; Mangan, Margaret T.; Stelten, Mark; Cooper, Kari M.; Herzig, Charles; Schriener, Alexander

    2015-04-01

    In the Salton Trough, CA, five rhyolite domes form the Salton Buttes: Mullet Island, Obsidian Butte, Rock Hill, North and South Red Hill, from oldest to youngest. Results presented here include 40Ar/39Ar anorthoclase ages, 238U-230Th zircon crystallization ages, and comparison of remanent paleomagnetic directions with the secular variation curve, which indicate that all domes are Holocene. 238U-230Th zircon crystallization ages are more precise than but within uncertainty of 40Ar/39Ar anorthoclase ages, suggesting that zircon crystallization proceeded until shortly before eruption in all cases except one. Remanent paleomagnetic directions require three eruption periods: (1) Mullet Island, (2) Obsidian Butte, and (3) Rock Hill, North Red Hill, and South Red Hill. Borehole cuttings logs document up to two shallow tephra layers. North and South Red Hills likely erupted within 100 years of each other, with a combined 238U-230Th zircon isochron age of: 2.83 ± 0.60 ka (2 sigma); paleomagnetic evidence suggests this age predates eruption by hundreds of years (1800 cal BP). Rock Hill erupted closely in time to these eruptions. The Obsidian Butte 238U-230Th isochron age (2.86 ± 0.96 ka) is nearly identical to the combined Red Hill age, but its Virtual Geomagnetic Pole position suggests a slightly older age. The age of aphyric Mullet Island dome is the least well constrained: zircon crystals are resorbed and the paleomagnetic direction is most distinct; possible Mullet Island ages include ca. 2300, 5900, 6900, and 7700 cal BP. Our results constrain the duration of Salton Buttes volcanism to between ca. 5900 and 500 years.

  18. PLA2G16 Expression in Human Osteosarcoma Is Associated with Pulmonary Metastasis and Poor Prognosis.

    Science.gov (United States)

    Liang, Shoulei; Ren, Zhiwu; Han, Xiuxin; Yang, Jilong; Shan, Luling; Li, Lin; Wang, Binying; Zhang, Qianyi; Mu, Tianyang; Chen, Kexin; Xiong, Shunbin; Wang, Guowen

    2015-01-01

    Osteosarcoma is the most frequent type of malignant bone tumor in children and adolescents and is associated with a high propensity for lung metastasis. Recent experiments have indicated that PLA2G16 contributes to osteosarcoma progression and metastasis in both mouse and human osteosarcoma cell lines. The aim of this study was to compare the expression of PLA2G16 in non-metastatic and metastatic osteosarcomas to determine whether PLA2G16 expression can serve as a biomarker of osteosarcoma prognosis and metastasis. Quantitative real-time PCR was used to examine PLA2G16 mRNA in primary osteosarcoma patients (18 patients without metastases and 17 patients with metastases), and immunohistochemistry (IHC) staining of PLA2G16 was performed on tissue microarrays from 119 osteosarcoma patients. Tumor metastatic behavior and survival of the patients were followed up for a minimum of 36 months and a maximum of 171 months. The prognostic value of PLA2G16 expression was evaluated by the Kaplan-Meier method and a log-rank test. Multivariate Cox regression analysis was used to identify significant independent prognostic factors. Osteosarcoma patients with metastasis showed a higher expression of PLA2G16 at both the mRNA and protein levels (both at P valuesmetastasis. Osteosarcoma patients with positive IHC staining of PLA2G16 expression at primary sites had shorter overall survival and metastasis-free survival (both at P values metastasis-free survival (both P values osteosarcoma patients for predicting the development of metastases and poor survival.

  19. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This document has been prepared by the US Department of Energy`s (DOE`s) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE`s Operations Office and Energy Technology Centers.

  20. Incidence of butt rot in a tree species experiment in northern Denmark

    DEFF Research Database (Denmark)

    Ronnberg, J; Vollbrecht, G.; Thomsen, Iben Margrete

    1999-01-01

    The susceptibility to infections by Heterobasidion annosum (Fr.) Bref. was examined in a 28-year-old tree species experiment in northern Jutland, Denmark. Silver fir (Abies alba Mill.), Caucasian fir (Abies nordmanniana (Stev.) Spach), grand fir (Abies grandis (Dougl) Lindl.), noble fir (Abies...... procera Rehd.), Japanese larch (Larix kaempferi (Lamb.) Carr.), Norway spruce (Picea abies (L.) Karst.), Sitka spruce (Picea sitchensis (Bong.) Carr.), and Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) were planted after shelterwood felling of a mountain pine (Pinus uncinata Mill. ex Mirb.) stand...... that had been infected by H. annosum. Douglas fir and noble fir showed the greatest mortality due to H. annosum during the first 5 years after planting. At first thinning the highest incidences of butt rot were recorded in noble fir, Japanese larch and Sitka spruce, with 44%, 43% and 36% of the thinned...

  1. Microstructure and Failure Analysis of Flash Butt Welded HSLA 590CL Steel Joints in Wheel Rims

    Science.gov (United States)

    Lu, Ping; Xu, Zhixin; Shu, Yang; Ma, Feng

    2016-11-01

    The aim of the present investigation was to evaluate the microstructures, mechanical properties and failure behavior of flash butt welded high strength low alloy 590CL steel joints. Acicular ferrite, Widmanstatten ferrite and granular bainite were observed in the weld. The micro-hardness values of the welded joints varied between 250 HV and 310 HV. The tensile strength of the welded joints met the strength standard of the wheel steel. The Charpy V-notch impact absorbing energy of the welded joints was higher than the base metal, and the impact fracture of the welded joints was composed of shearing and equiaxed dimples. The fracture mode of the wheel rim in the flaring and expanding process was brittle fracture and ductile fracture, respectively. A limited deviation was found in the terminal of the crack for the wheel in the flaring process. A transition from the weld to the Heat Affected Zone was observed for the wheel in the expanding process.

  2. Merging high resolution geophysical and geochemical surveys to reduce exploration risk at glass buttes, Oregon

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Patrick [Ormat Nevada, Inc., Reno, NV (United States); Fercho, Steven [Ormat Nevada, Inc., Reno, NV (United States); Perkin, Doug [Ormat Nevada, Inc., Reno, NV (United States); Martini, Brigette [Corescan Inc., Ascot (Australia); Boshmann, Darrick [Oregon State Univ., Corvallis, OR (United States)

    2015-06-01

    The engineering and studies phase of the Glass Buttes project was aimed at reducing risk during the early stages of geothermal project development. The project’s inclusion of high resolution geophysical and geochemical surveys allowed Ormat to evaluate the value of these surveys both independently and in combination to quantify the most valuable course of action for exploration in an area where structure, permeability, and temperature are the most pressing questions. The sizes of the thermal anomalies at Glass Buttes are unusually large. Over the course of Phase I Ormat acquired high resolution LIDAR data to accurately map fault manifestations at the surface and collected detailed gravity and aeromagnetic surveys to map subsurface structural features. In addition, Ormat collected airborne hyperspectral data to assist with mapping the rock petrology and mineral alteration assemblages along Glass Buttes faults and magnetotelluric (MT) survey to try to better constrain the structures at depth. Direct and indirect identification of alteration assemblages reveal not only the geochemical character and temperature of the causative hydrothermal fluids but can also constrain areas of upflow along specific fault segments. All five datasets were merged along with subsurface lithologies and temperatures to predict the most likely locations for high permeability and hot fluids. The Glass Buttes temperature anomalies include 2 areas, totaling 60 km2 (23 mi2) of measured temperature gradients over 165° C/km (10° F/100ft). The Midnight Point temperature anomaly includes the Strat-1 well with 90°C (194 °F) at 603 m (1981 ft) with a 164 °C/km (10°F/100ft) temperature gradient at bottom hole and the GB-18 well with 71°C (160 °F) at 396 m (1300 ft) with a 182°C/km (11°F/100ft) gradient. The primary area of alteration and elevated temperature occurs near major fault intersections associated with Brothers Fault Zone and Basin and Range systems. Evidence for faulting is

  3. The HABP2 G534E polymorphism does not increase nonmedullary thyroid cancer risk in Hispanics

    Science.gov (United States)

    Bohórquez, Mabel E; Estrada, Ana P; Stultz, Jacob; Sahasrabudhe, Ruta; Williamson, John; Lott, Paul; Duque, Carlos S; Donado, Jorge; Mateus, Gilbert; Bolaños, Fernando; Vélez, Alejandro; Echeverry, Magdalena

    2016-01-01

    Familial nonmedullary thyroid cancer (NMTC) has not been clearly linked to causal germline variants, despite the large role that genetic factors play in risk. Recently, HABP2 G534E (rs7080536A) has been implicated as a causal variant in NMTC. We have previously shown that the HABP2 G534E variant is not associated with TC risk in patients from the British Isles. Hispanics are the largest and the youngest minority in the United States and NMTC is now the second most common malignancy in women from this population. In order to determine if the HABP2 G534E variant played a role in NMTC risk among Hispanic populations, we analyzed 281 cases and 1105 population-matched controls from a multicenter study in Colombia, evaluating the association through logistic regression. We found that the HABP2 G534E variant was not significantly associated with NMTC risk (P=0.843) in this Hispanic group. We also stratified available clinical data by multiple available clinicopathological variables and further analyzed the effect of HABP2 on NMTC presentation. However, we failed to detect associations between HABP2 G534E and NMTC risk, regardless of disease presentation (P≥0.273 for all cases). Therefore, without any significant associations between the HABP2 G534E variant and NMTC risk, we conclude that the variant is not causal of NMTC in this Hispanic population. PMID:27097599

  4. Bone metabolism and formation of mice bred in a 2G environment

    Science.gov (United States)

    Kita, S.; Iwasaki, K.; Onishi, R.; Fujisawa, M.; Kim, H.; Shibata, S.; Ito, M.

    2003-10-01

    The purpose of this study is to reveal the effect of chronic hypergravity exposure on the bone formation and the bone metabolism when mammals produce offspring in a 2G environment. We measured the length and width of the thighbone, the length of the pelvis, the width of the pelvic cavity and the width of the fourth cervical vertebra on the second (F2) and the third (F3) generation mice bred in a 2G environment every ten days from 20 days old to 60 days old in an experiment on bone formation. In an experiment on bone metabolism, we measured calcium and phosphorus in the bones of the F3 in the 2G group.Ratios of the thighbone length, pelvis length, pelvic cavity width, and fourth cervical vertebra width versus the body length were calculated.These ratios were higher in the 2G group than the control group during all measuring periods.Calcium and phosphorus concentrations in the thighbone and the lumbar vertebra were lower in the 2G group than in the control group. However, the calcium and phosphorus concentrations in the cervical vertebrae of the 2G group were higher. These results suggest that the influence of gravity load may vary in the bones.

  5. The HABP2 G534E polymorphism does not increase nonmedullary thyroid cancer risk in Hispanics.

    Science.gov (United States)

    Bohórquez, Mabel E; Estrada, Ana P; Stultz, Jacob; Sahasrabudhe, Ruta; Williamson, John; Lott, Paul; Duque, Carlos S; Donado, Jorge; Mateus, Gilbert; Bolaños, Fernando; Vélez, Alejandro; Echeverry, Magdalena; Carvajal-Carmona, Luis G

    2016-05-01

    Familial nonmedullary thyroid cancer (NMTC) has not been clearly linked to causal germline variants, despite the large role that genetic factors play in risk. Recently, HABP2 G534E (rs7080536A) has been implicated as a causal variant in NMTC. We have previously shown that the HABP2 G534E variant is not associated with TC risk in patients from the British Isles. Hispanics are the largest and the youngest minority in the United States and NMTC is now the second most common malignancy in women from this population. In order to determine if the HABP2 G534E variant played a role in NMTC risk among Hispanic populations, we analyzed 281 cases and 1105 population-matched controls from a multicenter study in Colombia, evaluating the association through logistic regression. We found that the HABP2 G534E variant was not significantly associated with NMTC risk (P=0.843) in this Hispanic group. We also stratified available clinical data by multiple available clinicopathological variables and further analyzed the effect of HABP2 on NMTC presentation. However, we failed to detect associations between HABP2 G534E and NMTC risk, regardless of disease presentation (P≥0.273 for all cases). Therefore, without any significant associations between the HABP2 G534E variant and NMTC risk, we conclude that the variant is not causal of NMTC in this Hispanic population.

  6. The HABP2 G534E polymorphism does not increase nonmedullary thyroid cancer risk in Hispanics

    Directory of Open Access Journals (Sweden)

    Mabel E Bohórquez

    2016-05-01

    Full Text Available Familial nonmedullary thyroid cancer (NMTC has not been clearly linked to causal germline variants, despite the large role that genetic factors play in risk. Recently, HABP2 G534E (rs7080536A has been implicated as a causal variant in NMTC. We have previously shown that the HABP2 G534E variant is not associated with TC risk in patients from the British Isles. Hispanics are the largest and the youngest minority in the United States and NMTC is now the second most common malignancy in women from this population. In order to determine if the HABP2 G534E variant played a role in NMTC risk among Hispanic populations, we analyzed 281 cases and 1105 population-matched controls from a multicenter study in Colombia, evaluating the association through logistic regression. We found that the HABP2 G534E variant was not significantly associated with NMTC risk (P=0.843 in this Hispanic group. We also stratified available clinical data by multiple available clinicopathological variables and further analyzed the effect of HABP2 on NMTC presentation. However, we failed to detect associations between HABP2 G534E and NMTC risk, regardless of disease presentation (P≥0.273 for all cases. Therefore, without any significant associations between the HABP2 G534E variant and NMTC risk, we conclude that the variant is not causal of NMTC in this Hispanic population.

  7. Geophysical Investigation of Buried Slag at the Parrot Tailings Site, Butte, Montana

    Science.gov (United States)

    Ha, C. D. M.; Shepherd, K.; Mack, A.; Rutherford, B. S.; Speece, M. A.

    2016-12-01

    Butte, Montana, has served as an important mining district for more than 120 years. This area contains historic mine waste from decades of unregulated mining practices. In July 1881, the Parrot smelter in Butte started operations and was soon processing ore and producing copper. The Parrot smelter also had a concentrating plant that treated the ore prior to smelting. The Parrot smelter wastes (slag and tailings) were later covered with Berkeley Pit crushed quartz monzonite overburden. The slag is bricked because it was deposited hot and, as a consequence forms a laterally extensive, cohesive, hard body that is difficult to remove without blasting. With the mine waste being covered by unknown quantities of overburden and soil throughout the area, and core data being limited and expensive to retrieve, the only economical method of discovery is geophysics. Several geophysical techniques were used to determine the lateral boundaries and depth of the buried slag body. The geophysical methods used were seismic, gravity, electromagnetic induction, and magnetics. Not all of these geophysical surveys produced useful results due to the nature of the slag. For instance, electromagnetic induction could not distinguish between the slag and adjacent tailings; and, the microgravity profiles showed only a small gravitational field variation caused by the density contrast between slag and the surrounding tailings, sediment and granitic cover. On the other hand, the seismic surveys resulted in unexpected first arrival times that distinctly showed velocity variations due to the slag. In addition, the slag body produced a large magnetic response. Unpublished, proprietary well data allowed us to model the slag body from our magnetic data. This model was confirmed by projecting velocity tomograms, that we created using seismic diving waves, onto our magnetic models. Model results were combined to form a three-dimensional image of the slag body. These results will be used to help

  8. Smoking close to others and butt littering at bus stops: pilot observational study

    Directory of Open Access Journals (Sweden)

    Nick Wilson

    2014-02-01

    Full Text Available Background. Transportation settings such as bus stops and train station platforms are increasingly the target for new smokefree legislation. Relevant issues include secondhand smoke exposure, nuisance, litter, fire risks and the normalization of smoking. We therefore aimed to pilot study aspects of smoking behavior and butt disposal at bus stops.Methods. Systematic observation of smoking and butt disposal by smokers at bus stops. The selection of 11 sites was a mix of convenience and purposeful (bus stops on main routes in two New Zealand cities.Results. During 27 h of observation, a total of 112 lit cigarettes were observed being smoked. Smoking occurred in the presence of: just adults (46%, both young people and adults (44%, just young people (6% and alone (5%. An average of 6.3 adults and 3.8 young people were present at the bus stops while smoking occurred, at average minimum distances of 1.7 and 2.2 m respectively. In bus stops that included an enclosed shelter, 33% of the cigarettes were smoked inside the shelter with others present. Littering was the major form of cigarette disposal with 84% of cigarettes smoked being littered (95% CI; 77%–90%. Also, 4% of disposals were into vegetation, which may pose a fire risk.Conclusions. This pilot study is limited by its small size and various methodological aspects but it appears to be a first attempt to provide observational evidence around smoking at bus stops. The issues described could be considered by policy makers who are investigating national smokefree laws or by-laws covering transportation settings.

  9. Smoking close to others and butt littering at bus stops: pilot observational study.

    Science.gov (United States)

    Wilson, Nick; Oliver, Jane; Thomson, George

    2014-01-01

    Background. Transportation settings such as bus stops and train station platforms are increasingly the target for new smokefree legislation. Relevant issues include secondhand smoke exposure, nuisance, litter, fire risks and the normalization of smoking. We therefore aimed to pilot study aspects of smoking behavior and butt disposal at bus stops. Methods. Systematic observation of smoking and butt disposal by smokers at bus stops. The selection of 11 sites was a mix of convenience and purposeful (bus stops on main routes) in two New Zealand cities. Results. During 27 h of observation, a total of 112 lit cigarettes were observed being smoked. Smoking occurred in the presence of: just adults (46%), both young people and adults (44%), just young people (6%) and alone (5%). An average of 6.3 adults and 3.8 young people were present at the bus stops while smoking occurred, at average minimum distances of 1.7 and 2.2 m respectively. In bus stops that included an enclosed shelter, 33% of the cigarettes were smoked inside the shelter with others present. Littering was the major form of cigarette disposal with 84% of cigarettes smoked being littered (95% CI; 77%-90%). Also, 4% of disposals were into vegetation, which may pose a fire risk. Conclusions. This pilot study is limited by its small size and various methodological aspects but it appears to be a first attempt to provide observational evidence around smoking at bus stops. The issues described could be considered by policy makers who are investigating national smokefree laws or by-laws covering transportation settings.

  10. Syndrome to gene (S2G): in-silico identification of candidate genes for human diseases.

    Science.gov (United States)

    Gefen, Avitan; Cohen, Raphael; Birk, Ohad S

    2010-03-01

    The identification of genomic loci associated with human genetic syndromes has been significantly facilitated through the generation of high density SNP arrays. However, optimal selection of candidate genes from within such loci is still a tedious labor-intensive bottleneck. Syndrome to Gene (S2G) is based on novel algorithms which allow an efficient search for candidate genes in a genomic locus, using known genes whose defects cause phenotypically similar syndromes. S2G (http://fohs.bgu.ac.il/s2g/index.html) includes two components: a phenotype Online Mendelian Inheritance in Man (OMIM)-based search engine that alleviates many of the problems in the existing OMIM search engine (negation phrases, overlapping terms, etc.). The second component is a gene prioritizing engine that uses a novel algorithm to integrate information from 18 databases. When the detailed phenotype of a syndrome is inserted to the web-based software, S2G offers a complete improved search of the OMIM database for similar syndromes. The software then prioritizes a list of genes from within a genomic locus, based on their association with genes whose defects are known to underlie similar clinical syndromes. We demonstrate that in all 30 cases of novel disease genes identified in the past year, the disease gene was within the top 20% of candidate genes predicted by S2G, and in most cases--within the top 10%. Thus, S2G provides clinicians with an efficient tool for diagnosis and researchers with a candidate gene prediction tool based on phenotypic data and a wide range of gene data resources. S2G can also serve in studies of polygenic diseases, and in finding interacting molecules for any gene of choice.

  11. THE VITAMIN B(1) AND B(2) G CONTENT OF LIVER EXTRACT AND BREWERS' YEAST CONCENTRATE.

    Science.gov (United States)

    Miller, D K; Rhoads, C P

    1934-02-28

    1. Liver extract powder, No. 343 Lilly, and the same material prepared for parenteral use, when administered daily by mouth in amounts derived from 2.5 gm. of fresh whole liver, to rats weighing from 40 to 50 gm., contain sufficient vitamin B(1) to support normal growth, provided the animals receive in addition an adequate amount of vitamin B(2) G. Moreover, liver extract in the forms mentioned, administered in the same amounts, does not contain sufficient vitamin B(2) G to maintain normal growth of similar rate when all other necessary constituents of the diet are provided. 2. Liver extract (Lilly) in the form prepared for parenteral use, when administered daily by intraperitoneal injections, in amounts derived from 2.5 gm. of fresh whole liver, to rats under standard experimental conditions, does not contain sufficient vitamin B(2) G to maintain normal growth. Furthermore, the amount of vitamin B(1) present in liver extract in this form is not as effective in supporting normal growth when given by intraperitoneal injection as it is when given by mouth. 3. Vegex, when administered daily in amounts of 50, 150, and 250 mg. to rats of 40 to 50 gm. in weight contains sufficient vitamin B(1) to maintain normal growth of the rats, provided the animals receive in addition an adequate amount of vitamin B(2) G. However, vegex in the same amounts does not contain sufficient vitamin B(2) G to support normal growth of similar rats when all other necessary constituents of the diet are provided. 4. These experiments indicate that the extrinsic, anti-anemic factor of Castle and the thermostable growth-promoting food constituent, commonly known as vitamin B(2) G, are not identical.

  12. Theory of AC Loss in Cables with 2G HTS Wire

    Energy Technology Data Exchange (ETDEWEB)

    Clem, J.R.; Malozemoff, A.P.

    2009-09-13

    While considerable work has been done to understand AC losses in power cables made of first generation (1G) high temperature superconductor (HTS) wires, use of second generation (2G) HTS wires brings in some new considerations. The high critical current density of the HTS layer 2G wire reduces the surface superconductor hysteretic losses. Instead, gap and polygonal losses, flux transfer losses in imbalanced two layer cables and ferromagnetic losses for wires with NiW substrates constitute the principal contributions. Current imbalance and losses associated with the magnetic substrate can be minimized by orienting the substrates of the inner winding inward and the outer winding outward.

  13. The HABP2 G534E polymorphism does not increase nonmedullary thyroid cancer risk in Hispanics

    OpenAIRE

    Bohórquez, Mabel E; Ana P Estrada; Jacob Stultz; Ruta Sahasrabudhe; John Williamson; Paul Lott; Duque, Carlos S; Jorge Donado; Gilbert Mateus; Fernando Bolaños; Alejandro Vélez; Magdalena Echeverry; Carvajal-Carmona, Luis G

    2016-01-01

    Familial nonmedullary thyroid cancer (NMTC) has not been clearly linked to causal germline variants, despite the large role that genetic factors play in risk. Recently, HABP2 G534E (rs7080536A) has been implicated as a causal variant in NMTC. We have previously shown that the HABP2 G534E variant is not associated with TC risk in patients from the British Isles. Hispanics are the largest and the youngest minority in the United States and NMTC is now the second most common malignancy in women f...

  14. A2G plus management model for Alzheimer's disease%阿尔茨海默病的A2G plus管理模式

    Institute of Scientific and Technical Information of China (English)

    彭丹涛

    2016-01-01

    With the aging of society and the development of medically diagnostic techniques,the incidence and diagnosis rate of Alzheimer's disease (AD) have been increasing.However,there is no breakthrough in the treatment of AD at present.Thus,it is necessary to explore the optimal management for AD patients under the current condition.AD is characterized by multi-target mechanisms of pathogenesis and complexity of clinical symptoms,which requires more comprehensive treatment and management.Here,we elaborate of A2G plus (one or more of A to G and other plus measures) comprehensive management model for AD patients.This model is built upon 4 international authoritative guidelines,multi-target mechanisms of disease,existing therapeutic drugs and methods,and long-term clinical experiences and patient' s individual condition,and provides a new model of comprehensive treatment and management for AD patients.

  15. Butt-joint integration of active optical components based on InP/AlInGaAsP alloys

    DEFF Research Database (Denmark)

    Kulkova, Irina; Kuznetsova, Nadezda; Semenova, Elizaveta

    2014-01-01

    We demonstrate all-active planar high quality butt-joint (BJ) integration of a QW Semiconductor Optical Amplifier (SOA) and MQW Electro-Absorption Modulator (EAM) based on an InP/AlInGaAsP platform. The degradation of the optical properties in the vicinity of ~1 μm to the BJ interface was determi......We demonstrate all-active planar high quality butt-joint (BJ) integration of a QW Semiconductor Optical Amplifier (SOA) and MQW Electro-Absorption Modulator (EAM) based on an InP/AlInGaAsP platform. The degradation of the optical properties in the vicinity of ~1 μm to the BJ interface...

  16. Effects of Butt Design and Gap Width on the Microstructure and Mechanical Properties of Magnesium Alloy Welds

    Institute of Scientific and Technical Information of China (English)

    Honggang Dongi; Chuanqing Liao; Liqun Yang

    2012-01-01

    The effects of parallel and angular butt designs with different gap widths on the microstructure and mechanical properties of the resultant magnesium joints in gas tungsten arc welding were investigated. The experimental results displayed that the tensile strength of the joint made with angular butt joint and 0.3 ram-wide gap reached 266 MPa, the joint fractured through the heat-affected zone or base metal during tensile testing, and the microstructure examination showed that no macropore appeared in the fusion zone. However, macropores in diameter of larger than 200 micron occurred for other joint designs, the tensile strength of the resultant joints decreased, and the joints fractured through the fusion zone during tensile testing. The fracture surfaces were examined by scanning electron microscopy and the microhardness distribution in the joints was measured by using a Vickers microhardness tester.

  17. Geology of the Ralston Buttes district, Jefferson County, Colorado: a preliminary report

    Science.gov (United States)

    Sheridan, Douglas M.; Maxwell, Charles H.; Albee, Arden L.; Van Horn, Richard

    1956-01-01

    The Ralston Buttes district in Jefferson County is one of the most significant new uranium districts located east of the Continental Divide in Colorado. The district is east of the Colorado Front Range mineral belt, along the east front of the range. From November 1953 through October 1956, about 10,000 tons of uranium ore, much of which was high-grade pitchblende-bearing vein material, was shipped from the district. The ore occurs in deposits that range in size from bodies containing less than 50 tons to ore shoots containing over 1,000 tons. The only other mining activity in the area has been a sporadic production of beryl, feldspar, and scrap mica from Precambrian pegmatites, and quarrying of dimension stone, limestone, and clay from sedimentary rocks. Most of the Ralston Buttes district consists of complexly folded Precambrian metamorphic and igneous rocks - gneiss, schist, quartzite, amphibolite, and granodiorite. Paleozoic and Mesozoic sedimentary rocks crop out in the northeastern part of the district. These rocks are cut by northwesterly-trending fault systems of Laramide age and by small bodies of intrusive rocks that are Tertiary in age. The typical uranium deposits in the district are hydrothermal veins occupying openings in Laramide fault breccias or related fractures that cut the Precambrian rocks. Pitchblende and lesser amounts of secondary uranium minerals are associated with sparse base-mental sulfides in a gangue of carbonate minerals, potash feldspar, and, more rarely, quartz. Less common types of deposits consist of pitchblende and secondary uranium minerals that occupy fractures cutting pegmatites and quartz veins. The uranium deposits are concentrated in two areas, the Ralston Creek area and the Golden Gate Canyon area. The deposits in the Ralston Creek area are located along the Rogers fault system, and the deposits in the Golden Gate Canyon area are along the Hurricane Hill fault system. Two geologic factors were important to the localization

  18. Wired for success: A history of the Butte, Anaconda & Pacific Railway, 1892--1985

    Science.gov (United States)

    Mutschler, Charles Vincent

    The Butte, Anaconda & Pacific Railway (BA&P) was a standard gauge common carrier short line railroad within the state of Montana. A subsidiary of the Anaconda Copper Mining Company, the BA&P was built to carry ore from mines at Butte, Montana to Anaconda, twenty-six miles away, for concentrating and smelting. Other freight and passenger business was of secondary importance. In 1912, when General Electric contracted to convert the BA&P from steam to electric operation, the short line became a proving ground for main line railroad electrification, and the center of attention from advocates for electric power. Electric operation was demonstrated to be mechanically superior to the use of steam locomotives on the BA&P. Immediately after the BA&P proved the technological feasibility of high voltage direct current for moving heavy freight trains, the Chicago Milwaukee & St. Paul (CM&St.P) electrified over 600 miles of transcontinental main line using the basic technology demonstrated on the BA&P. However, on long distances of track with relatively few trains such as the CM&St.P, the capital cost of the electric distribution system exceeded the operational savings obtained by use of electric locomotives. Steam locomotives remained the primary form of railroad motive power in the United States until the 1950's, when the diesel-electric locomotive combined the mechanical efficiency of electric motors with an on-board diesel generating plant, eliminating the need for expensive electric power supply and distribution wires of conventional electrics. The BA&P purchased three diesels in the early 1950's, but relied primarily on its electric locomotives until 1967, when diesel operation became less costly than continued use of electric motive power. The BA&P offers a microcosmic view of the transformation of one industry in response to technological and economic forces as the United States moved from reliance on coal-burning steam power to electric power and internal combustion

  19. There is no such a thing as a free cigarette; lining nests with discarded butts brings short-term benefits, but causes toxic damage.

    Science.gov (United States)

    Suárez-Rodríguez, M; Macías Garcia, C

    2014-12-01

    Adaptation to human-modified environments such as cities is poised to be a major component of natural history in the foreseeable future. Birds have been shown to adapt their vocalizations, use of nesting places and activity rhythms to the urban environments, and we have previously reported that some species, including the house finch (Carpodacus mexicanus), use cellulose from smoked cigarette butts as lining material and thus reduce the number of ectoparasites in their nests, probably because the nicotine repels arthropods. Nicotine is only one of hundreds of potentially harmful substances found in cigarette butts. Here, we investigated whether the presence of such chemicals is harmful for house finches adding cigarette butts to their nests. We found that hatching and fledging success and chick immune response were all positively correlated to the proportion of the nest that was made up of butts. However, the signs of genotoxicity in the blood cells also increased with the proportion of butt cellulose in the nests. Although we have not measured the effect of genotoxicity on post-fledging survival and breeding success, it seems that bringing cigarette butts to the nest has negative consequences that may counterbalance the benefits of using them as ectoparasites repellents.

  20. PRELIMINARY ASSESSMENT OF NDE METHODS ON INSPECTION OF HDPE BUTT FUSION PIPING JOINTS FOR LACK OF FUSION

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, Susan L.; Doctor, Steven R.; Cinson, Anthony D.; Cumblidge, Stephen E.; Anderson, Michael T.

    2010-01-01

    Studies at the Pacific Northwest National Laboratory in Richland, Washington, are being conducted to evaluate nondestructive examination approaches for inspecting butt fusion joints in high density polyethylene (HDPE) pipe for lack of fusion (LOF). The work provides information to the United States Nuclear Regulatory Commission on the effectiveness and need for volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from preliminary assessments using ultrasonic nondestructive techniques and high-speed tensile impact testing for determining joint integrity. A series of butt joints were fabricated in 3408, 12-inch IPS DR-11 material by varying the fusion parameters in attempts to provide good joints and joints containing LOF. These butt joints were visually examined and volumetrically examined with time-of-flight diffraction (TOFD) and phased-array (PA) ultrasound. A limited subset of pipe joint material was destructively analyzed by either slicing through the joint and visually examining the surface or by employing a standard high-speed tensile impact test. Initial correlation of the fusion parameters, nondestructive, and destructive evaluations have shown that areas with gross LOF were detected with both TOFD and PA ultrasound and that the tensile impact test showed a brittle failure at the joint. There is still some ambiguity in results from the less obvious LOF conditions. Current work is targeted on assessing the sensitivity of the ultrasonic volumetric examinations and validating the results with a destructive analysis. It is expected that on-going and future work will lead to quantifying the ultrasonic responses in terms of joint integrity.

  1. Data of evolutionary structure change: 1GBAA-2G52A [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available entryIDChain> GLTQG-----NACAG > EEEE----- > >EEEEE EEE> ATOM 1112 CA GLN A 17...ce>LFERL---QPILS >EEEEE---HHHH ture> A 2G52A VYASVGALRSFID ...>EEEEHHHHHHHHH> ATOM 1430 CA VAL A 224 4.375 -6.871 6.2

  2. Economic Feasibility of V2G Frequency Regulation in Consideration of Battery Wear

    Directory of Open Access Journals (Sweden)

    Sekyung Han

    2013-02-01

    Full Text Available An economic feasibility study of vehicle-to-grid (V2G frequency regulation is performed in consideration of battery wear. Usually, a transaction for frequency regulation is made in terms of power capacity while the battery-wear proceeds in proportion to the absolute amount of energy transferred. In order to relate the two quantities, we first estimate the amount of transferred energy in terms of contracted power capacity, and hence regulation income, by analyzing actual regulation signals and transactions. On the other hand, the amount of transferrable energy during the life cycle of a battery is estimated analyzing some pervasive specifications for electric vehicle (EV batteries. The expected V2G income is then estimated and compared with battery prices to judge the economic feasibility of V2G regulation. In the latter part of the paper, the assessment result is validated with actual cycle life data of an EV battery cell. As a result, it is concluded that the estimated profit exceeds current market price of EV batteries, indicating that V2G regulation is an economically feasible service.

  3. A Simplified Model to Calculate AC Losses in Large 2G HTS Coils

    DEFF Research Database (Denmark)

    Song, Xiaowei (Andy); Mijatovic, Nenad; Jensen, Bogi Bech;

    2015-01-01

    AC losses are of great significance to quantify the performance of high temperature superconducting (HTS) devices. This paper presents a simplified model to calculate AC losses in large 2G HTS coils, which serves as a baseline to study HTS large scale applications such as electric machines. The m...

  4. Parkinson disease phenotype in Ashkenazi Jews with and without LRRK2 G2019S mutations.

    Science.gov (United States)

    Alcalay, Roy N; Mirelman, Anat; Saunders-Pullman, Rachel; Tang, Ming-X; Mejia Santana, Helen; Raymond, Deborah; Roos, Ernest; Orbe-Reilly, Martha; Gurevich, Tanya; Bar Shira, Anat; Gana Weisz, Mali; Yasinovsky, Kira; Zalis, Maayan; Thaler, Avner; Deik, Andres; Barrett, Matthew James; Cabassa, Jose; Groves, Mark; Hunt, Ann L; Lubarr, Naomi; San Luciano, Marta; Miravite, Joan; Palmese, Christina; Sachdev, Rivka; Sarva, Harini; Severt, Lawrence; Shanker, Vicki; Swan, Matthew Carrington; Soto-Valencia, Jeannie; Johannes, Brooke; Ortega, Robert; Fahn, Stanley; Cote, Lucien; Waters, Cheryl; Mazzoni, Pietro; Ford, Blair; Louis, Elan; Levy, Oren; Rosado, Llency; Ruiz, Diana; Dorovski, Tsvyatko; Pauciulo, Michael; Nichols, William; Orr-Urtreger, Avi; Ozelius, Laurie; Clark, Lorraine; Giladi, Nir; Bressman, Susan; Marder, Karen S

    2013-12-01

    The phenotype of Parkinson's disease (PD) in patients with and without leucine-rich repeat kinase 2 (LRRK2) G2019S mutations reportedly is similar; however, large, uniformly evaluated series are lacking. The objective of this study was to characterize the clinical phenotype of Ashkenazi Jewish (AJ) PD carriers of the LRRK2 G2019S mutation. We studied 553 AJ PD patients, including 65 patients who were previously reported, from three sites (two in New York and one in Tel-Aviv). Glucocerebrosidase (GBA) mutation carriers were excluded. Evaluations included the Montreal Cognitive Assessment (MoCA), the Unified Parkinson's Disease Rating Scale (UPDRS), the Geriatric Depression Scale (GDS) and the Non-Motor Symptoms (NMS) questionnaire. Regression models were constructed to test the association between clinical and demographic features and LRRK2 status (outcome) in 488 newly recruited participants. LRRK2 G2019S carriers (n = 97) and non-carriers (n = 391) were similar in age and age at onset of PD. Carriers had longer disease duration (8.6 years vs. 6.1 years; P 5 years (P = 0.042). Performance on the UPDRS, MoCA, GDS, and NMS did not differ by mutation status. PD in AJ LRRK2 G2019S mutation carriers is similar to idiopathic PD but is characterized by more frequent lower extremity involvement at onset and PIGD without the associated cognitive impairment.

  5. Data of evolutionary structure change: 1DMSA-1TI2G [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1DMSA-1TI2G 1DMS 1TI2 A G -LANGTVMSGSHWGVFTATVENGRATAFTPWE-------.../index> 1DMS A 1DMSA...in> 1DMS A 1DMSA.../pdbChain> 1DMSA YDPSDVTEAGT A 1DMSA LAAGW-----SMQRM

  6. Photocatalytic oxidation of aromatic amines using MnO2@g-C3N4

    Data.gov (United States)

    U.S. Environmental Protection Agency — An efficient and direct oxidation of aromatic amines to aromatic azo-compounds has been achieved using a MnO2@g-C3N4 catalyst under visible light as a source of...

  7. Security enhancement mechanism based on contextual authentication and role analysis for 2G-RFID systems.

    Science.gov (United States)

    Tang, Wan; Chen, Min; Ni, Jin; Yang, Ximin

    2011-01-01

    The traditional Radio Frequency Identification (RFID) system, in which the information maintained in tags is passive and static, has no intelligent decision-making ability to suit application and environment dynamics. The Second-Generation RFID (2G-RFID) system, referred as 2G-RFID-sys, is an evolution of the traditional RFID system to ensure better quality of service in future networks. Due to the openness of the active mobile codes in the 2G-RFID system, the realization of conveying intelligence brings a critical issue: how can we make sure the backend system will interpret and execute mobile codes in the right way without misuse so as to avoid malicious attacks? To address this issue, this paper expands the concept of Role-Based Access Control (RBAC) by introducing context-aware computing, and then designs a secure middleware for backend systems, named Two-Level Security Enhancement Mechanism or 2L-SEM, in order to ensure the usability and validity of the mobile code through contextual authentication and role analysis. According to the given contextual restrictions, 2L-SEM can filtrate the illegal and invalid mobile codes contained in tags. Finally, a reference architecture and its typical application are given to illustrate the implementation of 2L-SEM in a 2G-RFID system, along with the simulation results to evaluate how the proposed mechanism can guarantee secure execution of mobile codes for the system.

  8. Security Enhancement Mechanism Based on Contextual Authentication and Role Analysis for 2G-RFID Systems

    Directory of Open Access Journals (Sweden)

    Ximin Yang

    2011-06-01

    Full Text Available The traditional Radio Frequency Identification (RFID system, in which the information maintained in tags is passive and static, has no intelligent decision-making ability to suit application and environment dynamics. The Second-Generation RFID (2G-RFID system, referred as 2G-RFID-sys, is an evolution of the traditional RFID system to ensure better quality of service in future networks. Due to the openness of the active mobile codes in the 2G-RFID system, the realization of conveying intelligence brings a critical issue: how can we make sure the backend system will interpret and execute mobile codes in the right way without misuse so as to avoid malicious attacks? To address this issue, this paper expands the concept of Role-Based Access Control (RBAC by introducing context-aware computing, and then designs a secure middleware for backend systems, named Two-Level Security Enhancement Mechanism or 2L-SEM, in order to ensure the usability and validity of the mobile code through contextual authentication and role analysis. According to the given contextual restrictions, 2L-SEM can filtrate the illegal and invalid mobile codes contained in tags. Finally, a reference architecture and its typical application are given to illustrate the implementation of 2L-SEM in a 2G-RFID system, along with the simulation results to evaluate how the proposed mechanism can guarantee secure execution of mobile codes for the system.

  9. Security Enhancement Mechanism Based on Contextual Authentication and Role Analysis for 2G-RFID Systems

    Science.gov (United States)

    Tang, Wan; Chen, Min; Ni, Jin; Yang, Ximin

    2011-01-01

    The traditional Radio Frequency Identification (RFID) system, in which the information maintained in tags is passive and static, has no intelligent decision-making ability to suit application and environment dynamics. The Second-Generation RFID (2G-RFID) system, referred as 2G-RFID-sys, is an evolution of the traditional RFID system to ensure better quality of service in future networks. Due to the openness of the active mobile codes in the 2G-RFID system, the realization of conveying intelligence brings a critical issue: how can we make sure the backend system will interpret and execute mobile codes in the right way without misuse so as to avoid malicious attacks? To address this issue, this paper expands the concept of Role-Based Access Control (RBAC) by introducing context-aware computing, and then designs a secure middleware for backend systems, named Two-Level Security Enhancement Mechanism or 2L-SEM, in order to ensure the usability and validity of the mobile code through contextual authentication and role analysis. According to the given contextual restrictions, 2L-SEM can filtrate the illegal and invalid mobile codes contained in tags. Finally, a reference architecture and its typical application are given to illustrate the implementation of 2L-SEM in a 2G-RFID system, along with the simulation results to evaluate how the proposed mechanism can guarantee secure execution of mobile codes for the system. PMID:22163983

  10. Body height and arterial pressure in seated and supine young males during +2 G centrifugation

    DEFF Research Database (Denmark)

    Arvedsen, Sine K.; Eiken, Ola; Kölegård, Roger;

    2015-01-01

    by the use of a human centrifuge would increase mean arterial pressure (MAP) more in tall than in short males in the seated position. In short (162-171cm, n=8) and tall (194-203cm, n=10) healthy males (18-41yr), brachial arterial pressure, heart rate (HR) and cardiac output were measured during +2G...

  11. Price-based Energy Control for V2G Networks in the Industrial Smart Grid

    Directory of Open Access Journals (Sweden)

    Rong Yu

    2015-08-01

    Full Text Available The energy crisis and global warming call for a new industrial revolution in production and distribution of renewable energy. Distributed power generation will be well developed in the new smart electricity distribution grid, in which robust power distribution will be the key technology. In this paper, we present a new vehicle-to-grid (V2G network for energy transfer, in which distributed renewable energy helps the power grid balance demand and supply. Plug-in hybrid electric vehicles (PHEVs will act as transporters of electricity for distributed renewable energy dispatching. We formulate and analyze the V2G network within the theoretical framework of complex network. We also employ the generalized synchronization method to study the dynamic behavior of V2G networks. Furthermore, we develop a new price-based energy control method to stimulate the PHEV's behavior of charging and discharging. Simulation results indicate that the V2G network can achieve synchronization and each region is able to balance energy supply and demand through price-based control.

  12. HABP2 G534E Mutation in Familial Nonmedullary Thyroid Cancer.

    Science.gov (United States)

    Zhang, Tao; Xing, Mingzhao

    2016-06-01

    Papillary thyroid cancer (PTC) is a common endocrine malignancy, accounting for nearly 90% of all thyroid cancers. About 5% of PTC is hereditary familial nonmedullary thyroid cancer (FNMTC). No general susceptibility gene is known for FNMTC. An oncogenic HABP2 G534E mutation has been recently reported in one FNMTC kindred, suggesting that HABP2 is a susceptibility gene for FNMTC. Because of the limited kindred studied, how commonly this gene is responsible-and hence how important clinically it is-for FNMTC remains to be answered. By investigating a large number of FNMTC kindreds in the present study, we identified HABP2 G534E in several independent kindreds of FNMTC. The overall prevalence of HABP2 G534E was six per 43 (14.0%) PTC patients from the 29 kindreds and four per 29 (13.8%) kindreds. None of the subjects with benign thyroid neoplasm or the normal subjects from these kindreds had this mutation. These results are consistent with HABP2 G534E being a susceptibility gene in a subgroup of FNMTC, providing important diagnostic implications for this hereditary thyroid cancer.

  13. Alterations of Body Mass Gain of Neonates (P7&P14) During Certrifugation AT 2G

    Science.gov (United States)

    Baer, L. A.; Corbin, B. J.; Wade, C. E.; Hargens, Alan R. (Technical Monitor)

    1996-01-01

    Previous research has shown animal body mass to be significantly affected by centrifugation. At the onset of centrifugation, animals have a selective loss of fat, causing an initial body mass loss. Body mass gain will resume at the same rate as uncentrifuged animals, but this subsequent gain will be lower. For this study, two different ages of Sprague Hawley neonate families were observed during centrifugation. Eight litters (dam with eight neonates) of postnatal day (PN) seven and four litters (dam with ten neonates) of PN 14 were separated into two separate groups each, centrifuge (+2G(sub z)) and environmental controls (EC) and placed into either the centrifuge or an animal holding unit in the centrifuge rotunda for a total of 16 days. P7: Total litter start mass of +2G(sub z) litter = 138.90 g/end = 311.0 g EC litter = 150.85 g/end = 516.9 g. P14: Total litter start mass of +2G(sub z) litter = 287.70 g/end = 762.5g; EC litter = 245 g/end = 942.9 g. An initial body mass loss was observed in both groups of +2G(sub z) animals for two days after the onset of centrifugation, but then an increase began to occur. Literature suggests adult animals at +2G(sub z), will have an initial loss, but will resume similar growth rates over time as compared to control animals. The P7 +2G(sub z) animals began to gain body mass, but showed a significantly slower growth rate than their EC animals for the duration of the test (pace). The P14 +2G(sub z) animals began to show similar growth rates to their EC after day nine. At day 16, both groups of +2Gz animals were significantly smaller than the EC animals (pace). At +2Gz, animals experience an initial body mass loss. Older animals are able to resume similar growth rates as their controls, but younger animals showed growth rates to be significantly reduced.

  14. Indirect effects of cigarette butt waste on the dengue vector Aedes aegypti (Diptera: Culicidae).

    Science.gov (United States)

    Dieng, Hamady; Rajasaygar, Sudha; Ahmad, Abu Hassan; Rawi, Che Salmah Md; Ahmad, Hamdan; Satho, Tomomitsu; Miake, Fumio; Zuharah, Wan Fatma; Fukumitsu, Yuki; Saad, Ahmad Ramli; Abdul Hamid, Suhaila; Vargas, Ronald Enrique Morales; Ab Majid, Abdul Hafiz; Fadzly, Nik; Abu Kassim, Nur Faeza; Hashim, Nur Aida; Abd Ghani, Idris; Abang, Fatimah Bt; AbuBakar, Sazaly

    2014-02-01

    Despite major insecticide-based vector control programs, dengue continues to be a major threat to public health in urban areas. The reasons for this failure include the emergence of insecticide resistance and the narrowing of the spectrum of efficient products. Cigarette butts (CBs), the most commonly discarded piece of waste, also represent a major health hazard to human and animal life. CBs are impregnated with thousands of chemical compounds, many of which are highly toxic and none of which has history of resistance in mosquitoes. This study was performed to examine whether exposure to CB alters various biological parameters of parents and their progeny. We examined whether the mosquito changes its ovipositional behaviors, egg hatching, reproductive capacity, longevity and fecundity in response to CB exposure at three different concentrations. Females tended to prefer microcosms containing CBs for egg deposition than those with water only. There were equivalent rates of eclosion success among larvae from eggs that matured in CB and water environments. We also observed decreased life span among adults that survived CB exposure. Extracts of CB waste have detrimental effects on the fecundity and longevity of its offspring, while being attractive to its gravid females. These results altogether indicate that CB waste indirectly affect key adult life traits of Aedes aegypti and could conceivably be developed as a novel dengue vector control strategy, referring to previously documented direct toxicity on the larval stage. But this will require further research on CB waste effects on non-target organisms including humans.

  15. Requirements to gap widths and clamping for CO2 laser butt welding

    DEFF Research Database (Denmark)

    Gong, Hui; Juhl, Thomas Winther

    1999-01-01

    In the experimental study of fixturing and gap width requirements a clamping device for laser butt welding of steel sheets has been developed and tested. It has fulfilled the work and made the gap width experiments possible.It has shown that the maximum allowable gap width to some extent...... is inversely related to the welding speed. Also larger laser power leads to bigger allowable gap widths. The focal point position, though, has little influence on the maximum allowable gap width.During analysis X-ray photos show no interior porosity in the weld seam. Other methods have been applied to measure...... responses from variations in welding parameters.The table below lists the results of the study, showing the maximum allowable gap widths and some corresponding welding parameters.Maximum allowable Gap Width; Welding Speed; Laser Power:0.10 mm2 m/min2, 2.6 kW0.15 mm1 m/min2 kW0.20 mm1 m/min2.6 kW0.30 mm0.5 m...

  16. Transmission of Lamb waves and resonance at an adhesive butt joint of plates.

    Science.gov (United States)

    Mori, Naoki; Biwa, Shiro

    2016-12-01

    The transmission behavior of Lamb waves and the possible occurrence of resonance at an adhesive butt joint of plates are studied experimentally. To this purpose, two 2.5-mm thick aluminum alloy plates are bonded at their edges using cyanoacrylate-based adhesive. Bonded plate specimens with different joint conditions are prepared by changing the bonding procedure. The measurements are performed for the transmission characteristics of the lowest-order symmetric (S0) and antisymmetric (A0) Lamb modes for the frequency range of 0.4-0.6MHz below the cut-off frequency of the higher-order modes. The experimental results show that the transmission coefficients of the S0 and A0 modes exhibit different frequency-dependent characteristics depending on the joint condition. Furthermore, for the incidence of the S0 mode at the center frequency of 1MHz, the transmitted S0 mode in weakly bonded specimens shows a long oscillation tail due to the resonance effect. The experimental results are discussed in the light of the theoretical results based on the spring-type interface model. The interfacial stiffnesses identified from the transmission coefficients are shown to be correlated with the bonding condition of the joint and give reasonable estimates of the resonance frequencies of weakly bonded specimens.

  17. Fiber laser welding of austenitic steel and commercially pure copper butt joint

    Science.gov (United States)

    Kuryntsev, S. V.; Morushkin, A. E.; Gilmutdinov, A. Kh.

    2017-03-01

    The fiber laser welding of austenitic stainless steel and commercially pure copper in butt joint configuration without filler or intermediate material is presented. In order to melt stainless steel directly and melt copper via heat conduction a defocused laser beam was used with an offset to stainless steel. During mechanical tests the weld seam was more durable than heat affected zone of copper so samples without defects could be obtained. Three process variants of offset of the laser beam were applied. The following tests were conducted: tensile test of weldment, intermediate layer microhardness, optical metallography, study of the chemical composition of the intermediate layer, fractography. Measurements of electrical resistivity coefficients of stainless steel, copper and copper-stainless steel weldment were made, which can be interpreted or recalculated as the thermal conductivity coefficient. It shows that electrical resistivity coefficient of cooper-stainless steel weldment higher than that of stainless steel. The width of intermediate layer between stainless steel and commercially pure copper was 41-53 μm, microhardness was 128-170 HV0.01.

  18. Initiation and growth of microcracks in high strength steel butt welds

    Science.gov (United States)

    Olsen, Edward

    1993-05-01

    Early tests such as the explosion bulge test created a preference for overmatched welds (welds which are stronger than the base metal) which eventually became codified for many structural applications. While an overmatched system offers advantages such as the shedding of strain to the base plate, it requires the use of expensive fabrication procedures to avoid cracking. Undermatched welding of some high strength steels may offer reductions in welding costs with little sacrifice in weld performance or low cycle fatigue integrity. An experimental study was carried out to observe microcrack initiation and growth of overmatched and undermatched butt welded high strength steel samples using globally elastic low cycle fatigue testing. First, 1 inch thick HY-80 and HY-100 base plates were multipass, spray gas metal arc welded (GMAW) with overmatching and undermatching filler metal using a semiautomatic welding machine. Second, 1/4 inch thick MIL-A-46100 high hardness armor plates (HHA) were manually, two pass spray GMAW welded with two grades of undermatching consumables. Weld reinforcements were removed from all HY specimens and six HHA specimens. All specimens had a crack initiator slit machined in the test section. The specimens were fatigue tested by transverse tensile loading with a 12 to 13 Hz tension-tension profile. The loading range was from 10% to 85% of the tensile strength of the HY steel base plate and HHA weld metal respectively. Crack initiation and propagation was observed in situ using a confocal scanning laser microscope.

  19. Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding

    Science.gov (United States)

    Grujicic, M.; Ramaswami, S.; Snipes, J. S.; Yavari, R.; Arakere, A.; Yen, C.-F.; Cheeseman, B. A.

    2013-05-01

    A fully coupled (two-way), transient, thermal-mechanical finite-element procedure is developed to model conventional gas metal arc welding (GMAW) butt-joining process. Two-way thermal-mechanical coupling is achieved by making the mechanical material model of the workpiece and the weld temperature-dependent and by allowing the potential work of plastic deformation resulting from large thermal gradients to be dissipated in the form of heat. To account for the heat losses from the weld into the surroundings, heat transfer effects associated with natural convection and radiation to the environment and thermal-heat conduction to the adjacent workpiece material are considered. The procedure is next combined with the basic physical-metallurgy concepts and principles and applied to a prototypical (plain) low-carbon steel (AISI 1005) to predict the distribution of various crystalline phases within the as-welded material microstructure in different fusion zone and heat-affected zone locations, under given GMAW-process parameters. The results obtained are compared with available open-literature experimental data to provide validation/verification for the proposed GMAW modeling effort.

  20. Current Activities Assessing Butt Fusion Joint Integrity in High Density Polyethylene Piping

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, Susan L.; Cinson, Anthony D.; Doctor, Steven R.; Denslow, Kayte M.

    2012-09-01

    The Pacific Northwest National Laboratory (PNNL) in Richland, Washington, conducted initial studies to evaluate the effectiveness of nondestructive examinations (NDE) coupled with mechanical testing for assessing butt fusion joint integrity in high density polyethylene (HDPE) pipe. The work provided insightful information to the United States Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques for detecting lack of fusion (LOF) conditions in the fusion joints. HDPE has been installed on a limited basis in American Society of Mechanical Engineers (ASME) Class 3, buried piping systems at several operating U.S. nuclear power plants and has been proposed for use in new construction. A comparison was made between the results from ultrasonic and microwave nondestructive examinations and the results from mechanical destructive evaluations, specifically the high-speed tensile test and the side-bend test, for determining joint integrity. The data comparison revealed that none of the NDE techniques detected all of the lack-of-fusion conditions that were revealed by the destructive tests. Follow-on work has recently been initiated at PNNL to accurately characterize the NDE responses from machined flaws of varying size and location in PE 4710 materials as well as the LOF condition. This effort is directed at quantifying the ability of volumetric NDE techniques to detect flaws in relation to the critical flaw size associated with joint integrity. A status of these latest investigations is presented.

  1. Bead characterization of disk-laser butt welding of thin AA 2024 sheets

    Science.gov (United States)

    Caiazzo, Fabrizia; Alfieri, Vittorio; Cardaropoli, Francesco; Sergi, Vincenzo

    2012-03-01

    Higher productivity, lower distortion and better penetration are the main advantages which laser welding provides in comparison with conventional processes. A Trumpf TruDisk 2002 Yb:YAG disk-laser is used in this work, as it increases productivity and quality. Materials which involve many technological issues in welding, resulting in shallow penetration and defects, are aluminum alloys. In particular, AA 2024 behaviour is investigated in the paper, being this alloy extensively used in automotive and aerospace industries. Defocusing has been considered, as it affects key-holes conditions. Bead-on-plate and butt autogenous welding tests in continuous wave emission on 1.25 mm thick sheets have been examined from morphological and microstructural point of view. Geometric and mechanical features of the welding bead have been evaluated via a 3-levels experimental plan with power, welding speed and defocusing as governing factors. Softening in the fused zone through Vickers microhardness test and magnesium loss through energy dispersive spectrometer analysis have been discussed. Optimal welding conditions have been suggested.

  2. Numerical simulation of side heating for controlling angular distortion in multipass MMAW butt welded plates

    Indian Academy of Sciences (India)

    Adinath V Damale; Keshav N Nandurkar

    2015-04-01

    Distortion is a severe problem in weld products.It depends on various process parameters like plate thickness, current, voltage, type of weld joint and restraints put on. If distortion is not properly dealt during welding then the product may become useless from geometric accuracy point of view. In the present study, a 3-D coupled transient thermal analysis model with auxiliary side heating (parallel heating) is developed to control angular distortion. During analysis, parallel heating flames are placed at several locations from weld line in cross direction. A user defined subroutine is used to apply transient heat source and side heating flames. Element birth and death technique is used to simulate the filler material deposition. One side multipass 'V' butt weld configuration is used for this study. A series of observational tests are done with a special experimental fixture using Manual Metal Arc Welding (MMAW) to validate the proposed FEA model. It is found that the angular distortion has decreased from 2 mm to 0.4 mm with change in side heating distance from 50 to 90 mm from the weld line.

  3. Effect of defects on the burst failure of butt fusion welded polyethylene pipes

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Huan Sheng; Tun, Nwe Ni; Yoon, Kee Bong [Chung-Ang University, Seoul (Korea, Republic of); Kil, Seong Hee [Korea Gas Safety Corporation, Eumseong (Korea, Republic of)

    2016-05-15

    With the increasing demand of Medium density polyethylene (MDPE) pipes for gas transmission, the safety concern related with welding defects is becoming a serious matter. In this paper, experimental burst tests and finite element analyses were employed to study butt fusion welded MDPE pipe joints with spherical and planar defects of various sizes. These defects were used to simulate lack of bonding during the welding. Test results showed that in all pipe test cases, the failure location originated from pipe substrates, even though the defect size was increased to 45% of the pipe's wall thickness. The burst pressure could be estimated by the expression employed in the ASME BPVC, and in the burst pressure, the hoop stress was 20.28 MPa. Simulation results showed that the failure position was not only affected by the defect size, but also by the welding bead. It can be argued that a single welding defect whose maximum size is smaller than 15% of the thickness can be used without failure during short-term usage, even when there is no welding bead in the welded joint.

  4. Finite Element Simulation of Residual Stresses in Butt Welding of Two AISI 304 Stainless Steel Plates

    Directory of Open Access Journals (Sweden)

    Gurinder Singh Brar

    2013-06-01

    Full Text Available Welding is one of the most reliable and efficient permanent metal joining processes in the industry. When two plates are joined by welding, a very complex thermal cycle is applied to the weldment. Thermal energy applied results in irreversible elastic-plastic deformation and consequently gives rise to the residual stresses in and around fusion zone and heat affected zone (HAZ. It is well established fact that structural integrity of components is substantially affected by the residual stresses when subjected to thermal and structural loads. Presence of residual stresses may be beneficial or harmful for the structural components depending on the nature and magnitude of residual stresses. Using finite element based commercially available software, coupled thermal-mechanical three dimensional finite element model was developed by making an approximate geometry of the butt welded joint. Finite element analysis was performed to understand the complete nature of residual stresses in manual metal arc welded joint of AISI 304 stainless steel plate. Variation of residual stress in the plates in the heat affected zone was also being studied. The results obtained by finite element method agree well with those from X-ray diffraction method as published in literature for the prediction of residual stresses.

  5. Characterization of magnetically impelled arc butt welded T11 tubes for high pressure applications

    Directory of Open Access Journals (Sweden)

    R. Sivasankari

    2015-09-01

    Full Text Available Magnetically impelled arc butt (MIAB welding is a pressure welding process used for joining of pipes and tubes with an external magnetic field affecting arc rotation along the tube circumference. In this work, MIAB welding of low alloy steel (T11 tubes were carried out to study the microstructural changes occurring in thermo-mechanically affected zone (TMAZ. To qualify the process for the welding applications where pressure could be up to 300 bar, the MIAB welds are studied with variations of arc current and arc rotation time. It is found that TMAZ shows higher hardness than that in base metal and displays higher weld tensile strength and ductility due to bainitic transformation. The effect of arc current on the weld interface is also detailed and is found to be defect free at higher values of arc currents. The results reveal that MIAB welded samples exhibits good structural property correlation for high pressure applications with an added benefit of enhanced productivity at lower cost. The study will enable the use of MIAB welding for high pressure applications in power and defence sectors.

  6. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER

    Energy Technology Data Exchange (ETDEWEB)

    Sulaiman, Mohd Shahar; Manurung, Yupiter HP; Rahim, Mohammad Ridzwan Abdul Mohd; Redza, Ridhwan; Lidam, Robert Ngendang Ak.; Abas, Sunhaji Kiyai; Tham, Ghalib [Universiti Teknologi MARA, Kuala Lumpur (Malaysia); Haruman, Esa [Bakrie University, Jakarta (Indonesia); Chau, Chan Yin [ESI Group, Kuala Lumpur (Malaysia)

    2011-10-15

    This paper investigates the capability of linear thermal elastic numerical analysis to predict the welding distortion that occurs due to GMAW process. Distortion is considered as the major stumbling block that can adversely affect the dimensional accuracy and thus lead to expensive corrective work. Hence, forecast of distortion is crucially needed and ought to be determined in advance in order to minimize the negative effects, improve the quality of welded parts and finally to reduce the production costs. In this study, the welding deformation was simulated by using relatively new FEM software WELD PLANNER developed by ESI Group. This novel Welding Simulation Solution was employed to predict welding distortion induced in butt and T-joints with thickness of 4 mm. Low carbon steel material was used for the simulation and experimental study. A series of experiments using fully automated welding process were conducted for verification purpose to measure the distortion. By comparing between the simulation and experimental results, it was found out that this program code offered fast solution analysis time in estimating weld induced distortion within acceptable accuracy.

  7. Differences in Shiga toxin and phage production among stx2g-positive STEC strains

    Directory of Open Access Journals (Sweden)

    Claudia Viviana Granobles Velandia

    2012-06-01

    Full Text Available Shigatoxigenic E. coli (STEC are characterized by the production of Shiga toxins (Stx encoded by temperate bacteriophages. Stx production is linked to the induction of the phage lytic cycle. Several stx variants have been described and differentially associated with the risk of developing severe illness.The variant named stx2g was first identified in a STEC strain isolated from the faeces of healthy cattle. Analysis of stx2g-positive strains isolated from humans, animals and environmental sources have shown that they have a close relationship. In this study, stx2g-positive STEC isolated from cattle were analyzed for phage and Stx production, with the aim to relate the results to differences observed in cytotoxicity.The presence of inducible phages was assessed by analyzing the bacterial growth/lysis curves and also by plaque assay. Bacterial growth curves in the absence of induction were similar for all isolates, however, notably differed among induced cultures. The two strains that clearly evidenced bacteriolysis under this condition also showed higher phage titers in plaque assays. However, only the phage plaques produced by one of these strains (FB 62 hybridized with a stx2-probe. Furthermore, the production of Stx was evaluated by EIA and Western immunoblotting in overnight supernatants. By EIA, we detected Stx only in supernatants of FB 62, with a higher signal with induced than in uninduced cultures. By immunoblotting, Stx2 could be detected after induction in all stx2g-positive isolates, but with lower amounts of Stx2B subunit in those supernatants where phages could not be detected.Taking into account all the results, several differences could be found among stx2g-positive strains. The strain with the highest cytotoxic titer showed higher levels of stx2-phages and toxin production by EIA, and the opposite was observed for strains that previously showed low cytotoxic titers, confirming that in stx2g-positive strains Stx production is

  8. Analysis of the hematopoietic tissue in Pleurodeles waltl newts exposed to 2 g hypergravity

    Science.gov (United States)

    Domaratskaya, Elena; Nikonova, Tatyana M.; Grigoryan, Eleonora N.; Dvorochkin, Natalya; Yousuf, Rukhsana; Almeida, Eduardo; Butorina, Nina N.

    2012-07-01

    Gravity is an important factor in creating biologically-relevant mechanical loads, and in spaceflight living organisms encounter both microgravity as well as hypergravity conditions. Here we studied the influence of hypergravity on the hematopoietic tissue of P. waltl newts in parallel with tissue regeneration experiments of the newt lens and tail. At day 9 post-surgery one group of newts was subjected to centrifugation at 2 g (2G, 12 days), while another was kept at 1 g. In addition, a basal control in wet mats, at 1g, (BC, 1G), and an aquarium control, neutrally buoyant, (AC, low G), were also performed. Differential blood counts and histological analysis of the spleen and liver were carried out in experimental and control groups of animals. At day 21 post-surgery in all groups (AC, 1G, and 2G), the number of neutrophils in the blood was significantly lower than in BC indicating a decrease in the inflammation induced by surgery. The 2G group however, showed numbers of neutrophils significantly higher than AC (neutrally buoyant) animals. This result suggests that post-operative inflammation can persist longer at 2 g that under unloaded aquarium conditions. In contrast we did not observe any significant differences in lymphocyte numbers between any experimental and control groups. Histological examination of the liver and spleen also did not show any significant morphological alterations due to hypergravity. These results indicate that 12 day exposure to hypergravity at 2 g, had only partial influence on newt hematopoiesis, possibly extending the duration of surgery-related inflammatory responses. Data obtained with newts in our previous experiments on Foton-M2 and Foton-M3 flights in microgravity also showed only slight effect on blood cells. Furthermore microgravity also did not cause any morphological changes in the hematopoietic and lymphoid tissues, and did not impair the proliferative capacity of newt hematopoietic cells. In sum these results indicate the

  9. The HABP2 G534E Variant Is an Unlikely Cause of Familial Nonmedullary Thyroid Cancer

    Science.gov (United States)

    Sahasrabudhe, Ruta; Stultz, Jacob; Williamson, John; Lott, Paul; Estrada, Ana; Bohorquez, Mabel; Palles, Claire; Polanco-Echeverry, Guadalupe; Jaeger, Emma; Martin, Lynn; Echeverry, Maria Magdalena; Tomlinson, Ian

    2016-01-01

    Context: A recent study reported the nonsynonymous G534E (rs7080536, allele A) variant in the HABP2 gene as causal in familial nonmedullary thyroid cancer (NMTC). Objective: The objective of this study was to evaluate the causality of HABP2 G534E in the TCUKIN study, a multicenter population-based study of NMTC cases from the British Isles. Design and Setting: A case-control analysis of rs7080536 genotypes was performed using 2105 TCUKIN cases and 5172 UK controls. Participants: Cases comprised 2105 NMTC cases. Patient subgroups with papillary (n = 1056), follicular (n = 691), and Hürthle cell (n = 86) thyroid cancer cases were studied separately. Controls comprised 5172 individuals from the 1958 Birth Cohort and the National Blood Donor Service study. The controls had previously been genotyped using genome-wide single nucleotide polymorphism arrays by the Wellcome Trust Case Control Consortium study. Outcome Measures: Association between HABP2 G534E (rs7080536A) and NMTC risk was evaluated using logistic regression. Results: The frequency of the HABP2 G534E was 4.2% in cases and 4.6% in controls. We did not detect an association between this variant and NMTC risk (odds ratio [OR] = 0.896; 95% confidence interval, 0.746–1.071; P = .233). We also failed to detect an association between the HABP2 G534E and cases with papillary (1056 cases; G534E frequency = 3.5%; OR = 0.74; P = .017), follicular (691 cases; G534E frequency = 4.7%; OR = 1.00; P = 1.000), or Hürthle cell (86 cases; G534E frequency = 6.3%; OR = 1.40; P = .279) histology. Conclusions: We found that HABP2 G534E is a low-to-moderate frequency variant in the British Isles and failed to detect an association with NMTC risk, independent of histological type. Hence, our study does not implicate HABP2 G534E or a correlated polymorphism in familial NMTC, and additional data are required before using this variant in NMTC risk assessment. PMID:26691890

  10. 81. Upper body arterio-central venous PCO2 gap (UBCO2G in monitoring sick children with cardiac disease

    Directory of Open Access Journals (Sweden)

    Omar Mohammad Hijazi

    2015-10-01

    Conclusion: Upper is higher than lower body PCO2gap. UBPCO2G ⩾9.65 was associated with higher LA, BUN, creatinine, serum glucose and PRISM and lower urine output. Patients with UBPCO2G ⩾9.65 were sicker. UBPCO2G can be used as a biomarker in monitoring children with cardiac disease.

  11. Polymer Photovoltaic Cell Using TiO2/G-PEDOT Nanocomplex Film as Electrode

    Directory of Open Access Journals (Sweden)

    F. X. Xie

    2008-01-01

    Full Text Available Using TiO2/G-PEDOT (PEDOT/PSS doped with glycerol nanocomplex film as a substitute for metal electrode in organic photovoltaic cell is described. Indium tin oxide (ITO worked as cathode and TiO2/G-PEDOT nanocomplex works as anode. The thickness of TiO2 layer in nanocomplex greatly affects the act of this nonmetallic electrode of the device. To enhance its performance, this inverted organic photovoltaic cell uses another TiO2 layer as electron selective layer contacted to ITO coated glass substrates. All films made by solution processing techniques are coated on the transparent substrate (glass with a conducting film ITO. The efficiency of this solar cell is compared with the conventional device using Al as electrode.

  12. Economic Feasibility of V2G Frequency Regulation in Consideration of Battery Wear

    OpenAIRE

    2013-01-01

    An economic feasibility study of vehicle-to-grid (V2G) frequency regulation is performed in consideration of battery wear. Usually, a transaction for frequency regulation is made in terms of power capacity while the battery-wear proceeds in proportion to the absolute amount of energy transferred. In order to relate the two quantities, we first estimate the amount of transferred energy in terms of contracted power capacity, and hence regulation income, by analyzing actual regulation signals an...

  13. Missile Electronic Equipment Career Ladder, AFSC 411XOA (Formerly AFSC 316X2G).

    Science.gov (United States)

    1986-03-01

    Plan of Instruction ........ ........ 31 Analysis of Equipment Used at the Technicai School....... 36 ELECTRONICS PRINCIPLES INVENTORY...two courses at Chanute AFB IL: Electronics Principles Course AQR31020-0O2, Blocks I through IX, followed by one of two separate airman basic resident...Blocks I through IV of Electronics Principles Course AQR31020- 002 before advancing to the ABR courses. Secondly, the former 316X2G ABR courses were

  14. Infantile and childhood onset PLA2G6-associated neurodegeneration in a large North African cohort.

    Science.gov (United States)

    Romani, M; Kraoua, I; Micalizzi, A; Klaa, H; Benrhouma, H; Drissi, C; Turki, I; Castellana, S; Mazza, T; Valente, E M; Gouider-Khouja, N

    2015-01-01

    Mutations in the PLA2G6 gene are causative of PLA2G6-associated neurodegeneration (PLAN), a spectrum of neurodegenerative conditions including infantile, childhood and adult onset forms. Seventeen North African patients with a clinical suspicion of infantile-onset PLAN underwent clinical, neurophysiological and neuroimaging examinations, and PLA2G6 sequencing. Haplotype analysis was performed to date the identified founder mutation. All patients carried biallelic mutations in PLA2G6. Sixteen children had the commonest form of infantile-onset PLAN, with early onset of psychomotor regression, hypotonia, pyramidal and cerebellar signs, and abnormal ocular movements. The phenotype was highly homogeneous, with rapid development of severe spastic tetraparesis, cognitive impairment and optic atrophy. Neuroimaging showed cerebellar atrophy and claval hypertrophy to be the commonest and earliest signs, whilst cerebellar cortex hyperintensity and pallidal iron deposition were later findings. Motor or sensory-motor neuropathy and electroencephalogram fast rhythms were also frequent. Nine patients from six families shared the same founder mutation (p.V691del) which probably arose by the late seventeenth century. Only one patient fitted the diagnosis of the much rarer childhood-onset PLAN. Despite the early onset (18 months), clinical progression was slower, with behavioral disturbances and dystonia. Typical features of infantile-onset PLAN such as hypotonia, nystagmus/strabismus, optic atrophy, electroencephalogram fast rhythms and motor neuropathy were absent. Cerebellar atrophy, claval hypertrophy and pallidal hypointensity were evident at brain magnetic resonance imaging. This patient carried a missense variant predicted to be less deleterious. The PLAN-associated phenotypes and the challenges of diagnosing the childhood-onset form are delineated, and a common North African founder mutation is identifed. © 2014 EAN.

  15. Evaluation of LRRK2 G2019S penetrance: relevance for genetic counseling in Parkinson disease.

    Science.gov (United States)

    Goldwurm, S; Zini, M; Mariani, L; Tesei, S; Miceli, R; Sironi, F; Clementi, M; Bonifati, V; Pezzoli, G

    2007-04-03

    We report the results of a family-based study of LRRK2 G2019S penetrance in Parkinson disease. We studied 19 families identified through the analysis of unrelated consecutive patients. The cumulative incidence of the disease was 15% at 60 years, 21% at 70 years, and 32% at 80 years. This study provides accurate estimates of G2019S penetrance by minimizing the selection bias.

  16. Clinical evaluation of QuantiFERON TB-2G test for immunocompromised patients.

    Science.gov (United States)

    Kobashi, Y; Mouri, K; Obase, Y; Fukuda, M; Miyashita, N; Oka, M

    2007-11-01

    The usefulness of the tuberculin skin test (TST) and the QuantiFERON TB-2G (QFT-TB) test were compared in immunocompromised patients. The subjects consisted of 252 immunocompromised patients who were clinically suspected of tuberculosis (TB) infection between April 2005 and December 2006. Regarding the underlying diseases, 74 subjects had malignant diseases, 72 were undergoing immunosuppressive treatment, 52 had diabetes mellitus, 50 had chronic renal failure and four had HIV infection. While the positive rate of the QFT-TB test for the diagnosis of TB infection (TB disease or latent TB infection) was 78.1%, that of TST for TB infection was 50.0%. The QFT-TB test was significantly better than TST. However, 32 (13%) patients had an indeterminate QFT-TB result. Indeterminate findings were significantly more frequent in patients receiving immunosuppressive treatment (28%), especially with lymphocytopaenia in the peripheral blood, than in those who had other underlying diseases. While TST-positive and QFT-TB test-negative results were recognised in immunocompromised patients with bacille Calmette-Guérin vaccination or nontuberculous mycobacterial disease, TST-negative and QFT-TB test-positive results were recognised in immunocompromised patients with a past history of TB infection. It was concluded that the QuantiFERON TB-2G test is a more useful diagnostic method for tuberculosis infection than tuberculin skin test for immunocompromised patients suspected of tuberculosis disease. However, because the results of the QuantiFERON TB-2G test show an indeterminate response for patients receiving immunosuppressive treatment, especially for those with lymphocytopaenia due to severe underlying diseases, care must be taken in the interpretation of the QuantiFERON TB-2G test for these patients.

  17. Novel TCAP mutation c.32C>A causing limb girdle muscular dystrophy 2G.

    Directory of Open Access Journals (Sweden)

    Amirtharaj Francis

    Full Text Available TCAP encoded telethonin is a 19 kDa protein, which plays an important role in anchoring titin in Z disc of the sarcomere, and is known to cause LGMD2G, a rare muscle disorder characterised by proximal and distal lower limb weakness, calf hypertrophy and loss of ambulation. A total of 300 individuals with ARLGMD were recruited for this study. Among these we identified 8 clinically well characterised LGMD2G cases from 7 unrelated Dravidian families. Clinical examination revealed predominantly proximo-distal form of weakness, scapular winging, muscle atrophy, calf hypertrophy and foot drop, immunoblot showed either complete absence or severe reduction of telethonin. Genetic analysis revealed a novel nonsense homozygous mutation c.32C>A, p.(Ser11* in three patients of a consanguineous family and an 8 bp homozygous duplication c.26_33dupAGGTGTCG, p.(Arg12fs31* in another patient. Both mutations possibly lead to truncated protein or nonsense mediated decay. We could not find any functionally significant TCAP mutation in the remaining 6 samples, except for two other polymorphisms, c.453A>C, p.( =  and c.-178G>T, which were found in cases and controls. This is the first report from India to demonstrate TCAP association with LGMD2G.

  18. LRRK2 G2019S in the North African population: a review.

    Science.gov (United States)

    Benamer, Hani T S; de Silva, Rajith

    2010-01-01

    Parkinson's disease (PD) is a common neurodegenerative disorder, for which environmental and/or genetic factors are postulated as possible causes. Over the past decade there has been a substantial increase in the knowledge of the genetics of PD. Mutations in Leucine-rich repeat kinase 2 (LRRK2) are the most frequent genetic causes of PD, and the common G2019S mutation has been identified in various ethnic groups with variable frequency. The aim of this article is to review the literature relating to LRRK2 G2019S in the North African population, which is composed of two main ethnic groups - the Berbers and the Arabs. The frequency of LRRK2 G2019S is 30-41% in familial PD and 30-39% in apparently sporadic PD in North Africa. Within healthy controls, Moroccan Berbers appear to have the highest carrier frequency at 3.3%. The majority of the available studies do not draw a clear distinction between the two ethnic groups, despite the distinct possibility that their ancestral origins are different. Further research looking at the respective prevalences of LRRK2 G2019S in Berbers and Arabs, and in different Arab populations, seems justified.

  19. LRRK2 G2019S mutations are associated with an increased cancer risk in Parkinson disease.

    Science.gov (United States)

    Saunders-Pullman, Rachel; Barrett, Matthew J; Stanley, Kaili M; Luciano, Marta San; Shanker, Vicki; Severt, Lawrence; Hunt, Ann; Raymond, Deborah; Ozelius, Laurie J; Bressman, Susan B

    2010-11-15

    Leucine rich repeat kinase (LRRK2) G2019S mutations are presumed to cause PD through a toxic gain of function of the protein kinase. Small molecule kinase inhibitors have been developed for the treatment of certain cancers, and some antioncogenic agents such as sunitinib, may nonspecifically inhibit LRRK2. Few studies, however, have assessed cancer risk in LRRK2 mutation carriers. To explore this risk, we evaluated records of Ashkenazi Jewish (AJ) PD patients participating in genetic research. Charts were reviewed for 163 unrelated AJ PD patients, 31 of whom harbored the G2019S mutation. History of cancer was queried at baseline intake using a form reviewing medical conditions, and charts were reviewed for all follow-up visits. 9/31 LRRK2 G2019S mutation carriers had nonskin cancers, whereas 15/132 without mutations had nonskin cancers, representing an almost threefold increased risk in this group (HR 2.9, 95% CI 1.3-6.6). Age at first nonskin cancer was younger in the LRRK2 carriers (56.0 years) than the noncarriers (62.0 years), but was not significant. 67% of the LRRK2 carriers had their cancer before the onset of PD, whereas only 40% of noncarriers developed their first nonskin cancer before onset of PD. While further evaluation is warranted, our findings indicate an increased risk of nonskin cancers in LRRK2 G2019S mutation carriers, which may be related to toxic gain of function of mutated LRRK2.

  20. Preliminary study of HTS magnet using 2G wires for maglev train

    Science.gov (United States)

    Ogata, Masafumi; Miyazaki, Yoshiki; Hasegawa, Hitoshi; Sasakawa, Takashi; Nagashima, Ken

    2010-06-01

    There are several advantages by applying a high temperature superconducting wire to an on-board superconducting magnet for the maglev train. At first, an increase of thermal capacity of superconducting coils contributes a stability of the superconducting state of the coils. In addition, a reliability of superconducting magnet improves by simplification of the magnet structure. And the weight of the superconducting magnet and the energy consumption of the on-board cryocooler will decrease. Therefore, we examined the possibility on application of the 2G wire with a high critical current density in a high magnetic field. We performed numerical analysis regarding the weight of a superconducting magnet and the energy consumption of an on-board cryocooler in consideration of the characteristics of the 2G wire. Furthermore, we have carried out the Ic measurement for the commercial 2G wires under various experimental conditions such as temperature, magnetic field strength and angle. We also performed the trial manufacture and evaluation of Ic characteristics for the small race track-shaped superconducting coil.

  1. Basic study of HTS magnet using 2G wires for maglev train

    Science.gov (United States)

    Ogata, M.; Miyazaki, Y.; Hasegawa, H.; Sasakawa, T.; Nagashima, K.

    2010-11-01

    There are several advantages by applying a high-temperature superconducting wire to an on-board superconducting magnet for the maglev train. At first, an increase of thermal capacity of superconducting coils contributes a stability of the superconducting state of the coils. In addition, a reliability of superconducting magnet improves by simplification of the magnet structure. And the weight of the superconducting magnet and the energy consumption of the on-board cryocooler will decrease. Therefore, we examined the possibility on application of the 2G wire with a high critical current density in a high magnetic field. We performed numerical analysis regarding the weight of a superconducting magnet and the energy consumption of an on-board cryocooler in consideration of the characteristics of the 2G wire. Furthermore, we have carried out the Ic measurement for the commercial 2G wires under various experimental conditions such as temperature, magnetic field strength and angle. We also performed the trial manufacture and evaluation of Ic characteristics for the small race track-shaped superconducting coil.

  2. Basic study of HTS magnet using 2G wires for maglev train

    Energy Technology Data Exchange (ETDEWEB)

    Ogata, M., E-mail: ogata@rtri.or.j [Railway Technical Research Institute, 2-8-38, Hikari-cho, Kokubunji-shi, Tokyo 185-8540 (Japan); Miyazaki, Y.; Hasegawa, H.; Sasakawa, T.; Nagashima, K. [Railway Technical Research Institute, 2-8-38, Hikari-cho, Kokubunji-shi, Tokyo 185-8540 (Japan)

    2010-11-01

    There are several advantages by applying a high-temperature superconducting wire to an on-board superconducting magnet for the maglev train. At first, an increase of thermal capacity of superconducting coils contributes a stability of the superconducting state of the coils. In addition, a reliability of superconducting magnet improves by simplification of the magnet structure. And the weight of the superconducting magnet and the energy consumption of the on-board cryocooler will decrease. Therefore, we examined the possibility on application of the 2G wire with a high critical current density in a high magnetic field. We performed numerical analysis regarding the weight of a superconducting magnet and the energy consumption of an on-board cryocooler in consideration of the characteristics of the 2G wire. Furthermore, we have carried out the I{sub c} measurement for the commercial 2G wires under various experimental conditions such as temperature, magnetic field strength and angle. We also performed the trial manufacture and evaluation of I{sub c} characteristics for the small race track-shaped superconducting coil.

  3. Preliminary study of HTS magnet using 2G wires for maglev train

    Energy Technology Data Exchange (ETDEWEB)

    Ogata, Masafumi; Miyazaki, Yoshiki; Hasegawa, Hitoshi; Sasakawa, Takashi; Nagashima, Ken, E-mail: ogata@rtri.or.j [Railway Technical Research Institute, Hikari-cho 2-8-38, Kokubunji-shi, Tokyo (Japan)

    2010-06-01

    There are several advantages by applying a high temperature superconducting wire to an on-board superconducting magnet for the maglev train. At first, an increase of thermal capacity of superconducting coils contributes a stability of the superconducting state of the coils. In addition, a reliability of superconducting magnet improves by simplification of the magnet structure. And the weight of the superconducting magnet and the energy consumption of the on-board cryocooler will decrease. Therefore, we examined the possibility on application of the 2G wire with a high critical current density in a high magnetic field. We performed numerical analysis regarding the weight of a superconducting magnet and the energy consumption of an on-board cryocooler in consideration of the characteristics of the 2G wire. Furthermore, we have carried out the I{sub c} measurement for the commercial 2G wires under various experimental conditions such as temperature, magnetic field strength and angle. We also performed the trial manufacture and evaluation of I{sub c} characteristics for the small race track-shaped superconducting coil.

  4. Analisis Kualitas Jaringan 2G Pada Frekuensi 900MHz Dan 1800MHz Di Area Purwokerto

    Directory of Open Access Journals (Sweden)

    Alfin Hikmaturokhman

    2013-11-01

    Full Text Available Teknologi 2G GSM masih banyak digunakan untuk komunikasi selular pada layanan suara maupun data. Performansi jaringan sangat berpengaruh terhadap layanan komunikasi yang digunakan. Drive test merupakan salah satu metode yang digunakan untuk mengamati performansi jaringan dari sisi penerima. Penelitian ini membahas tentang bagaimana cara pengamatan performasi jaringan dengan metode drive test single site. Parameter yang diamati untuk mengetahui performansi suatu jaringan 2G adalah Rx Level, Rx Qual, SQI dan Throughput. Rx Level yaitu digunakan untuk pengamatan level sinyal penerima dari BTS. Rx Qual digunakan untuk menentukan kualitas sinyal penerima. SQI merupakan nilai indikator dari kualitas layanan suara. Throughput menampilkan nilai pengamatan layanan data hasil download dan upload. Hasil pengamatan dari drive test single site ini memperoleh nilai level sinyal atau Rx Level ? -85 dBm dapat mencapai 80% untuk frekuensi 900 MHz sedangkan pada frekuensi 1800 MHz memperoleh 74,95%, Rx Qual dari range 0-3 memperoleh 26,58% pada frekuensi 900 MHz dan 33,81% pada frekuensi 1800 MHz. Nilai throughput maksimum dapat mencapai target 60 Kbps pada penggunaan download GPRS dan 90 Kbps untuk penggunaan download EDGE, sedangkan nilai throughput upload dapat mencapai 30 Kbps pada GPRS dan 60 Kbps pada EDGE. Nilai maksimum throughput download maupun upload pada jaringan 2G di BTS Teluk masih dalam keadaan normal dengan melihat hasil nilai maksimum throughput berdasarkan Key Performance Indicator (KPI.

  5. A New V2G Control Strategy for Load Factor Improvement Using Smoothing Technique

    Directory of Open Access Journals (Sweden)

    CHANHOM, P.

    2017-08-01

    Full Text Available This paper proposes a new vehicle-to-grid (V2G control strategy for improving the load factor in the power network. To operate the proposed strategy, the available storage capacity of the PEVs’ batteries is considered as a battery energy storage system (BESS for charging and discharging an amount of power corresponding to the V2G power command. Due to the remarkable advantages of the technique so-called simple moving average, it is selected for applying in the proposed V2G control strategy. In this research, for investigating the load factor improvement, the essential data including the daily-load profiles with 7-day and 14-day periods are used for the 3 studied cases. These 3 studied cases present the power network with variation of the PEVs locations for describing the PEVs usage and charging or discharging behavior. The performance of the proposed strategy is simulated and verified by the MATPOWER software. The simulation results show that the load factors of the 3 studied cases are improved. Moreover, the encouragement of energy arbitrage for the PEVs owners is also discussed in this paper.

  6. Discarded cigarette butts attract females and kill the progeny of Aedes albopictus.

    Science.gov (United States)

    Dieng, Hamady; Saifur, Rahman G M; Ahmad, Abu Hassan; Rawi, Che Salmah Md; Boots, Michael; Satho, Tomomitsu; Zuharah, Wan Fatma; Fadzly, Nik; Althbyani, Abdulaziz; Miake, Fumio; Jaal, Zairi; Abubakar, Sazaly

    2011-09-01

    Discarded cigarette butts (DCB) waste occurs worldwide, pollutes landscapes, is unsightly, and results in added debris removal costs. There is, therefore, a great deal of current interest in making use of DCBs in beneficial ways. Despite evidence that DCBs are harmful to water fleas (Daphnia magna), which breed in aquatic environments as do mosquito larvae, their impact on dengue vectors is unknown. We examined whether Aedes albopictus alters its ovipositional responses, larval eclosion, and development in response to presence of DCBs in its habitats. We found oviposition activity in DCB-treated water similar to that of control water and that ovipositional activity in DCB solutions steadily increased over time as those solutions aged to 10 days. Larval eclosion was initially suppressed on day 1 in DCB solution, but increased thereafter to levels similar to control larval eclosion rates. The DCB-water solutions produced significantly higher mortality in both 1st and 2nd instars over control larvae for several days after initial exposure. Mortality rates decreased sharply 3 to 5 days postexposure as DCBs continued to decompose. We found increased survival rates during late development, but daily input of fresh DCBs prevented most young larvae from completing development. Taken together, these observations suggest that decomposing did not deter gravid Ae. albopictus females from ovipositing in treated containers and that DCB solutions had larvicidal effects on early instars. Our results are discussed in the context of DCB use to control container-breeding Ae. albopictus, a competent dengue vector in Asia and other parts of the world.

  7. Cigarette butt decomposition and associated chemical changes assessed by 13C CPMAS NMR.

    Science.gov (United States)

    Bonanomi, Giuliano; Incerti, Guido; Cesarano, Gaspare; Gaglione, Salvatore A; Lanzotti, Virginia

    2015-01-01

    Cigarette butts (CBs) are the most common type of litter on earth, with an estimated 4.5 trillion discarded annually. Apart from being unsightly, CBs pose a serious threat to living organisms and ecosystem health when discarded in the environment because they are toxic to microbes, insects, fish and mammals. In spite of the CB toxic hazard, no studies have addressed the effects of environmental conditions on CB decomposition rate. In this study we investigate the interactive effects of substrate fertility and N transfer dynamics on CB decomposition rate and carbon quality changes. We carried out an experiment using smoked CBs and wood sticks, used as a slow decomposing standard organic substrate, incubated in both laboratory and field conditions for two years. CB carbon quality changes during decomposition was assessed by 13C CPMAS NMR. Our experiment confirmed the low degradation rate of CBs which, on average, lost only 37.8% of their initial mass after two years of decomposition. Although a net N transfer occurred from soil to CBs, contrary to our hypothesis, mass loss in the medium-term (two years) was unaffected by N availability in the surrounding substrate. The opposite held for wood sticks, in agreement with the model that N-rich substrates promote the decomposition of other N-poor natural organic materials with a high C/N ratio. As regards CB chemical quality, after two years of decomposition 13C NMR spectroscopy highlighted very small changes in C quality that are likely to reflect a limited microbial attack.

  8. Cigarette butt decomposition and associated chemical changes assessed by 13C CPMAS NMR.

    Directory of Open Access Journals (Sweden)

    Giuliano Bonanomi

    Full Text Available Cigarette butts (CBs are the most common type of litter on earth, with an estimated 4.5 trillion discarded annually. Apart from being unsightly, CBs pose a serious threat to living organisms and ecosystem health when discarded in the environment because they are toxic to microbes, insects, fish and mammals. In spite of the CB toxic hazard, no studies have addressed the effects of environmental conditions on CB decomposition rate. In this study we investigate the interactive effects of substrate fertility and N transfer dynamics on CB decomposition rate and carbon quality changes. We carried out an experiment using smoked CBs and wood sticks, used as a slow decomposing standard organic substrate, incubated in both laboratory and field conditions for two years. CB carbon quality changes during decomposition was assessed by 13C CPMAS NMR. Our experiment confirmed the low degradation rate of CBs which, on average, lost only 37.8% of their initial mass after two years of decomposition. Although a net N transfer occurred from soil to CBs, contrary to our hypothesis, mass loss in the medium-term (two years was unaffected by N availability in the surrounding substrate. The opposite held for wood sticks, in agreement with the model that N-rich substrates promote the decomposition of other N-poor natural organic materials with a high C/N ratio. As regards CB chemical quality, after two years of decomposition 13C NMR spectroscopy highlighted very small changes in C quality that are likely to reflect a limited microbial attack.

  9. High power laser welding of thick steel plates in a horizontal butt joint configuration

    Science.gov (United States)

    Atabaki, M. Mazar; Yazdian, N.; Ma, J.; Kovacevic, R.

    2016-09-01

    In this investigation, two laser-based welding techniques, autogenous laser welding (ALW) and laser welding assisted with a cold wire (LWACW), were applied to join thick plates of a structural steel (A36) in a horizontal narrow gap butt joint configuration. The main practical parameters including welding method and laser power were varied to get the sound weld with a requirement to achieve a full penetration with the reinforcement at the back side of weld in just one pass. The weld-bead shape, cross-section and mechanical properties were evaluated by profilometer, micro-hardness test and optical microscope. In order to investigate the stability of laser-induced plasma plume, the emitted optical spectra was detected and analyzed by the spectroscopy analysis. It was found that at the laser power of 7 kW a fully penetrated weld with a convex back side of weld could be obtained by the LWACW. The microstructural examinations showed that for the ALW the acicular ferrite and for the LWACW the pearlite were formed in the heat affected zone (HAZ). The prediction of microstructure based on continuous cooling transformation (CCT) diagram and cooling curves obtained by thermocouple measurement were in good agreement with each other. According to the plasma ionization values obtained from the spectroscopy analysis the plume for both processes was recognized as dominated weakly ionized plasma including the main vaporized elemental composition. At the optimum welding condition (LWACW at the laser power of 7 kW) the fluctuation of the electron temperature was reduced. The spectroscopy analysis demonstrated that at the higher laser power more of the elemental compositions such as Mn and Fe were evaporated.

  10. 2G HTS wires made on 30 μm thick Hastelloy substrate

    Science.gov (United States)

    Sundaram, A.; Zhang, Y.; Knoll, A. R.; Abraimov, D.; Brownsey, P.; Kasahara, M.; Carota, G. M.; Nakasaki, R.; Cameron, J. B.; Schwab, G.; Hope, L. V.; Schmidt, R. M.; Kuraseko, H.; Fukushima, T.; Hazelton, D. W.

    2016-10-01

    REBCO (RE = rare earth) based high temperature superconducting (HTS) wires are now being utilized for the development of electric and electromagnetic devices for various industrial, scientific and medical applications. In the last several years, the increasing efforts in using the so-called second generation (2G) HTS wires for some of the applications require a further increase in their engineering current density (J e). The applications are those typically related to high magnetic fields where the higher J e of a REBCO wire, in addition to its higher irreversibility fields and higher mechanical strength, is already a major advantage over other superconducting wires. An effective way to increase the J e is to decrease the total thickness of a wire, for which using a thinner substrate becomes an obvious and attractive approach. By using our IBAD-MOCVD (ion beam assisted deposition-metal organic chemical vapor deposition) technology we have successfully made 2G HTS wires using a Hastelloy® C276 substrate that is only 30 μm in thickness. By using this thinner substrate instead of the typical 50 μm thick substrate and with a same critical current (I c), the J e of a wire can be increased by 30% to 45% depending on the copper stabilizer thickness. In this paper, we report the fabrication and characterization of the 2G HTS wires made on the 30 μm thick Hastelloy® C276 substrate. It was shown that with the optimization in the processing protocol, the surface of the thinner Hastelloy® C276 substrate can be readily electropolished to the quality needed for the deposition of the buffer stack. Same in the architecture as that on the standard 50 μm thick substrate, the buffer stack made on the 30 μm thick substrate showed an in-plane texture with a Δϕ of around 6.7° in the LaMnO3 cap layer. Low-temperature in-field transport measurement results suggest that the wires on the thinner substrate had achieved equivalent superconducting performance, most importantly the I

  11. Bioremediation of Tannery Wastewater by Chromium Resistant Fungal Isolate Fusarium Chlamydosporium SPFS2-g

    Directory of Open Access Journals (Sweden)

    Smiley Sharma

    2014-12-01

    Full Text Available The present study assessed the bioremediation potential of Fusarium chlamydosporium SPFS2-g isolated from tannery effluent enriched soil. The isolate exhibited minimum inhibitory concentration (MIC for Cr(VI as 500 ppm. The treatment of tannery wastewater with Fusarium chlamydosporium in shake flask experiment resulted in the reduction of chemical oxygen demand (COD, color, Cr(VI, total suspended solids (TSS, turbidity, Na+, Cl-, and NO3- in the order of 71.80, 64.69, 100, 36.47, 22.77, 11.69, 27.87 and 62.33%, respectively after six days of treatment duration.

  12. Indoor radio planning a practical guide for 2G, 3G and 4G

    CERN Document Server

    Tolstrup, Morten

    2015-01-01

    Why is high performance indoor wireless service needed, and how is it best implemented? As the challenge of providing better service and higher data speeds and quality for mobile applications intensifies, ensuring adequate in-building and tunnel coverage and capacity is increasingly important. A unique, single-source reference on the theoretical and practical knowledge behind indoor and tunnel radio planning, this book provides a detailed overview of mobile networks systems, coverage and capacity solutions with 2G, 3G and 4G cellular system technologies as a backdrop.  All of the available s

  13. The HABP2 G534E Variant Is an Unlikely Cause of Familial Nonmedullary Thyroid Cancer

    OpenAIRE

    Sahasrabudhe, R; Stultz, J; Williamson, J; Lott, P; A. Estrada; Bohorquez, M; Palles, C; Polanco-Echeverry, G; Jaeger, E; Martin, L.; Magdalena Echeverry, M; Tomlinson, I.; Carvajal-Carmona, LG; TCUKIN,

    2016-01-01

    A recent study reported the non-synonymous G534E (rs7080536, allele A) variant in the HABP2 gene as causal in familial non-medullary thyroid cancer (NMTC).The objective of this study was to evaluate the causality of HABP2 G534E in the TCUKIN study, a multi-center population based study of NMTC cases from the British Isles.A case-control analysis of rs7080536 genotypes was performed using 2,105 TCUKIN cases and 5,172 UK controls.Cases comprised 2,105 NMTC cases. Patients sub-groups with papill...

  14. In-process monitoring and adaptive control for gap in micro butt welding with pulsed YAG laser

    Science.gov (United States)

    Kawahito, Yousuke; Kito, Masayuki; Katayama, Seiji

    2007-05-01

    A gap is one of the most important issues to be solved in laser welding of a micro butt joint, because the gap results in welding defects such as underfilling or a non-bonded joint. In-process monitoring and adaptive control has been expected as one of the useful procedures for the stable production of sound laser welds without defects. The objective of this research is to evaluate the availability of in-process monitoring and adaptive control in micro butt welding of pure titanium rods with a pulsed neodymium : yttrium aluminium garnet (Nd : YAG) laser beam of a 150 µm spot diameter. It was revealed that a 45 µm narrow gap was detected by the remarkable jump in a reflected light intensity due to the formation of the molten pool which could bridge the gap. Heat radiation signal levels increased in proportion to the sizes of molten pools or penetration depths for the respective laser powers. As for adaptive control, the laser peak power was controlled on the basis of the reflected light or the heat radiation signals to stably produce a sound deeply penetrated weld reduced underfilling. In the case of a 100 µm gap, the underfilling was greatly reduced by half smaller than those made with a conventional rectangular pulse shape in seam welding as well as spot welding with a pulsed Nd : YAG laser beam. Consequently, the adaptive control of the laser peak power on the basis of in-process monitoring could reduce the harmful effects due to a gap in micro butt laser welding with a pulsed laser beam.

  15. In-process monitoring and adaptive control for gap in micro butt welding with pulsed YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Kawahito, Yousuke; Kito, Masayuki; Katayama, Seiji [Joining and Welding Research Institute (JWRI), Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan)

    2007-05-07

    A gap is one of the most important issues to be solved in laser welding of a micro butt joint, because the gap results in welding defects such as underfilling or a non-bonded joint. In-process monitoring and adaptive control has been expected as one of the useful procedures for the stable production of sound laser welds without defects. The objective of this research is to evaluate the availability of in-process monitoring and adaptive control in micro butt welding of pure titanium rods with a pulsed neodymium : yttrium aluminium garnet (Nd : YAG) laser beam of a 150 {mu}m spot diameter. It was revealed that a 45 {mu}m narrow gap was detected by the remarkable jump in a reflected light intensity due to the formation of the molten pool which could bridge the gap. Heat radiation signal levels increased in proportion to the sizes of molten pools or penetration depths for the respective laser powers. As for adaptive control, the laser peak power was controlled on the basis of the reflected light or the heat radiation signals to stably produce a sound deeply penetrated weld reduced underfilling. In the case of a 100 {mu}m gap, the underfilling was greatly reduced by half smaller than those made with a conventional rectangular pulse shape in seam welding as well as spot welding with a pulsed Nd : YAG laser beam. Consequently, the adaptive control of the laser peak power on the basis of in-process monitoring could reduce the harmful effects due to a gap in micro butt laser welding with a pulsed laser beam.

  16. Control of Precambrian basement deformation zones on emplacement of the Laramide Boulder batholith and Butte mining district, Montana, United States

    Science.gov (United States)

    Berger, Byron R.; Hildenbrand, Thomas G.; O'Neill, J. Michael

    2011-01-01

    What are the roles of deep Precambrian basement deformation zones in the localization of subsequent shallow-crustal deformation zones and magmas? The Paleoproterozoic Great Falls tectonic zone and its included Boulder batholith (Montana, United States) provide an opportunity to examine the importance of inherited deformation fabrics in batholith emplacement and the localization of magmatic-hydrothermal mineral deposits. Northeast-trending deformation fabrics predominate in the Great Falls tectonic zone, which formed during the suturing of Paleoproterozoic and Archean cratonic masses approximately 1,800 mega-annum (Ma). Subsequent Mesoproterozoic to Neoproterozoic deformation fabrics trend northwest. Following Paleozoic through Early Cretaceous sedimentation, a Late Cretaceous fold-and-thrust belt with associated strike-slip faulting developed across the region, wherein some Proterozoic faults localized thrust faulting, while others were reactivated as strike-slip faults. The 81- to 76-Ma Boulder batholith was emplaced along the reactivated central Paleoproterozoic suture in the Great Falls tectonic zone. Early-stage Boulder batholith plutons were emplaced concurrent with east-directed thrust faulting and localized primarily by northwest-trending strike-slip and related faults. The late-stage Butte Quartz Monzonite pluton was localized in a northeast-trending pull-apart structure that formed behind the active thrust front and is axially symmetric across the underlying northeast-striking Paleoproterozoic fault zone, interpreted as a crustal suture. The modeling of potential-field geophysical data indicates that pull-apart?stage magmas fed into the structure through two funnel-shaped zones beneath the batholith. Renewed magmatic activity in the southern feeder from 66 to 64 Ma led to the formation of two small porphyry-style copper-molybdenum deposits and ensuing world-class polymetallic copper- and silver-bearing veins in the Butte mining district. Vein orientations

  17. Three-dimensional finite element analysis for estimation of the weld residual stress in the dissimilar butt weld piping

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyoung Soo; Kim, Man Won; Lee, Sung Ho [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2013-01-15

    Numerous dissimilar metal welds are used to connect carbon steel and stainless steel in nuclear power plants. Recently, some cracks have occurred in the dissimilar metal welds, and welding residual stress is considered as a contributing factor to the cracks. In this study, welding residual stresses in dissimilar butt weld piping were evaluated by the 3-dimensional (3-D) finite element method. Welding residual stresses along the circumference of heat affected zones as well as weld regions were obtained through the analysis, which could not be obtainable with 2-dimensional (2-D) analysis. The differences between 2-D analysis and 3-D analysis are presented in this paper.

  18.  Ischemic Stroke Secondary to Aortic Dissection Following Rifle Butt Recoil Chest Injury: A Case Report

    Directory of Open Access Journals (Sweden)

    John Valiath

    2011-11-01

    Full Text Available  Ischemic stroke secondary to aortic dissection is not uncommon. We present a patient with left hemiplegia secondary to Stanford type A aortic dissection extending to the supra-aortic vessels, which was precipitated by rifle butt recoil chest injury. The diagnosis of aortic dissection was delayed due to various factors. Finally, the patient underwent successful Bentall procedure with complete resolution of symptoms. This case emphasizes the need for caution in the use of firearms for recreation and to take precautions in preventing such incidents. In addition, this case illustrates the need for prompt cardiovascular physical examination in patients presenting with stroke.

  19. Conserved expression of truncated telethonin in a patient with limb-girdle muscular dystrophy 2G.

    Science.gov (United States)

    Barresi, Rita; Morris, Charlotte; Hudson, Judith; Curtis, Elizabeth; Pickthall, Clare; Bushby, Kate; Davies, Nicholas P; Straub, Volker

    2015-04-01

    Limb-girdle muscular dystrophy 2G is caused by mutations in the TCAP gene that encodes for telethonin. Here we describe a 49 year-old male patient of Indian descent presenting a classical LGMD phenotype. He had normal motor milestones but became noticeably slower in his early teens and was wheelchair bound by age 44. The muscle biopsy showed myopathic features and absence of labeling with an antibody to the C-terminal portion of telethonin. Sequence analysis of the TCAP gene revealed a novel homozygous mutation in exon 2, predicted to generate a truncated protein of 81 amino acids. Interestingly, an antibody for the full-length protein showed labeling on sections and a single band of ~10 kDa on Western blot. The truncated protein co-localized with filamin C at the Z-line. Our findings indicate that mutant telethonin can be incorporated into the sarcomere and that other LGMD2G patients with retention of telethonin expression may exist.

  20. Manufacturing and test of 2G-HTS coils for rotating machines: Challenges, conductor requirements, realization

    Energy Technology Data Exchange (ETDEWEB)

    Oomen, Marijn, E-mail: marijn.oomen@siemens.com [Siemens AG, Corporate Technology, CT T DE HW4, PO Box 3220, 91050 Erlangen (Germany); Herkert, Werner; Bayer, Dietmar; Kummeth, Peter; Nick, Wolfgang; Arndt, Tabea [Siemens AG, Corporate Technology, CT T DE HW4, PO Box 3220, 91050 Erlangen (Germany)

    2012-11-20

    We investigate the use of 2nd-generation High-Temperature Superconductors (2G-HTSs) in the rotors of electrical motors and generators. For these devices the conductor must be wound into robust impregnated coils, which are operated in vacuum at temperatures around 30 K, in strong magnetic fields of about 2T. Differences in thermal contraction between the coil former, conductor constituents, impregnation resin, bandage and heat-sink materials (assembled at room temperature) cause mechanical stresses at operating temperature. Rotating-machine operation adds Lorentz forces and challenging centripetal accelerations up to thousands of g. Second generation-HTS conductors withstand large tensile stresses in axial direction and compression in normal direction. However, shear stresses, axial compression, and tension normal to the conductor can cause degradation in superconducting properties. Such stresses can be mitigated by correct choice of materials, coil lay-out and manufacturing process. A certain stress level will remain, which the conductor must withstand. We have manufactured many impregnated round and race-track coils, using different 2G-HTS conductors, and tested them at temperatures from 25 K to 77 K. Degradation of the superconductor in early coils was traced to the mentioned differences in thermal contraction, and was completely avoided in coils produced later. We will discuss appropriate coil-winding techniques to assure robust and reliable superconductor performance.

  1. The LRRK2 G2019S mutation as the cause of Parkinson's disease in Ashkenazi Jews.

    Science.gov (United States)

    Thaler, Avner; Ash, Elissa; Gan-Or, Ziv; Orr-Urtreger, Avi; Giladi, Nir

    2009-11-01

    Mutations in the leucine rich repeat kinase 2 gene (LRRK2) are recognized as the most common cause of genetic Parkinsonism to date. The G2019S mutation has been implicated as an important determinant of Parkinson's disease (PD) in both Ashkenazi Jewish and North African Arab populations with carrier frequency of 29.7% among familial and 6% in sporadic Ashkenazi Jewish PD cases. PD patients with the G2019S mutation display similar clinical characteristics to patients with sporadic PD. While the function of the LRRK2 protein has yet to be fully determined, its distribution coincides with brain areas most affected by PD. The G2019S mutation is believed to be responsible for up-regulation of LRRK2 kinase activity, which may ultimately play a role in neuronal loss. The utility of LRRK2 G2019S screening in family members of Ashkenazi PD patients is discussed. LRRK2 G2019S mutation carriers without PD may be an ideal population for the study of possible neuroprotective strategies as they become available, and for furthering the understanding of the pathogenesis and long-term clinical outcomes of the disease.

  2. Manufacturing and test of 2G-HTS coils for rotating machines: Challenges, conductor requirements, realization

    Science.gov (United States)

    Oomen, Marijn; Herkert, Werner; Bayer, Dietmar; Kummeth, Peter; Nick, Wolfgang; Arndt, Tabea

    2012-11-01

    We investigate the use of 2nd-generation High-Temperature Superconductors (2G-HTSs) in the rotors of electrical motors and generators. For these devices the conductor must be wound into robust impregnated coils, which are operated in vacuum at temperatures around 30 K, in strong magnetic fields of about 2T. Differences in thermal contraction between the coil former, conductor constituents, impregnation resin, bandage and heat-sink materials (assembled at room temperature) cause mechanical stresses at operating temperature. Rotating-machine operation adds Lorentz forces and challenging centripetal accelerations up to thousands of g. Second generation-HTS conductors withstand large tensile stresses in axial direction and compression in normal direction. However, shear stresses, axial compression, and tension normal to the conductor can cause degradation in superconducting properties. Such stresses can be mitigated by correct choice of materials, coil lay-out and manufacturing process. A certain stress level will remain, which the conductor must withstand. We have manufactured many impregnated round and race-track coils, using different 2G-HTS conductors, and tested them at temperatures from 25 K to 77 K. Degradation of the superconductor in early coils was traced to the mentioned differences in thermal contraction, and was completely avoided in coils produced later. We will discuss appropriate coil-winding techniques to assure robust and reliable superconductor performance.

  3. Microgrid and Plug in Electric Vehicle (PEV) with Vehicle to Grid (V2G) Power Services Capability (Briefing Charts)

    Science.gov (United States)

    2015-09-01

    for public release Microgrid and Plug in Electric Vehicle (PEV) with Vehicle to Grid (V2G) Power Services Capability Shukri Kazbour PEV Lead Engineer...00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Microgrid and Plug in Electric Vehicle (PEV) with Vehicle to Grid (V2G) Power Services Capability...Infrastructure Demonstration for Energy Reliability and Security Phase-II (SPIDERS-II) • Plug in Electric Vehicle (PEV) and V2G Power services 2. Tactical

  4. Stress Distribution in the Dissimilar Metal Butt Weld of Nuclear Reactor Piping due to the Simulation Technique for the Repair Welding

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hweeseung; Huh, Namsu [Seoul Nat' l Univ. of Science and Technology, Seoul (Korea, Republic of); Kim, Jinsu; Lee, Jinho [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-05-15

    During welding, the dissimilar metal butt welds of nuclear piping are typically subjected to repair welding in order to eliminate defects that are found during post-weld inspection. It has been found that the repair weld can significantly increase the tensile residual stress in the weldment, and therefore, accurate estimation of the weld residual stress due to repair weld, especially for dissimilar metal welds using Ni-based alloy 82/182 in nuclear components, is of great importance in order to assess susceptibility to primary water stress corrosion cracking. In the present study, the stress distributions of dissimilar metal butt welds in nuclear reactor piping subjected to repair weld were investigated based on detailed nonlinear finite element analyses. Particular emphasis was placed on the variation of the stress distribution in the dissimilar metal butt weld according to the finite element welding analysis sequence for the repair welding process.

  5. Effects of 2 G on adiposity, leptin, lipoprotein lipase, and uncoupling protein-1 in lean and obese Zucker rats

    Science.gov (United States)

    Warren, L. E.; Horwitz, B. A.; Hamilton, J. S.; Fuller, C. A.

    2001-01-01

    Male Zucker rats were exposed to 2 G for 8 wk to test the hypothesis that the leptin regulatory pathway contributes to recovery from effects of 2 G on feeding, growth, and nutrient partitioning. After initial hypophagia, body mass-independent food intake of the lean rats exposed to 2 G surpassed that of the lean rats maintained at 1 G, but food intake of the obese rats exposed to 2 G remained low. After 8 wk at 2 G, body mass and carcass fat were less in both genotypes. Leptin and percent fat were lower in lean rats exposed to 2 G vs. 1 G but did not differ in obese rats exposed to 2 G vs. 1 G. Although exposure to 2 G did not alter uncoupling protein-1 levels, it did elicit white fat pad-specific changes in lipoprotein lipase activity in obese but not lean rats. We conclude that 2 G affects both genotypes but that the lean Zucker rats recover their food intake and growth rate and retain "normal" lipoprotein lipase activity to a greater degree than do the obese rats, emphasizing the importance of a functional leptin regulatory pathway in this acclimation.

  6. Effects of 2 G on adiposity, leptin, lipoprotein lipase, and uncoupling protein-1 in lean and obese Zucker rats

    Science.gov (United States)

    Warren, L. E.; Horwitz, B. A.; Hamilton, J. S.; Fuller, C. A.

    2001-01-01

    Male Zucker rats were exposed to 2 G for 8 wk to test the hypothesis that the leptin regulatory pathway contributes to recovery from effects of 2 G on feeding, growth, and nutrient partitioning. After initial hypophagia, body mass-independent food intake of the lean rats exposed to 2 G surpassed that of the lean rats maintained at 1 G, but food intake of the obese rats exposed to 2 G remained low. After 8 wk at 2 G, body mass and carcass fat were less in both genotypes. Leptin and percent fat were lower in lean rats exposed to 2 G vs. 1 G but did not differ in obese rats exposed to 2 G vs. 1 G. Although exposure to 2 G did not alter uncoupling protein-1 levels, it did elicit white fat pad-specific changes in lipoprotein lipase activity in obese but not lean rats. We conclude that 2 G affects both genotypes but that the lean Zucker rats recover their food intake and growth rate and retain "normal" lipoprotein lipase activity to a greater degree than do the obese rats, emphasizing the importance of a functional leptin regulatory pathway in this acclimation.

  7. Busted Butte Phase 2: of Post-Test Mineback and Overcore Rock Samples

    Energy Technology Data Exchange (ETDEWEB)

    H.J. Turin; M.A. McGraw; C.L. Jones; C.D. Scism; W.E. Soll

    2002-10-07

    A complex tracer mixture was injected continuously for over two years into a 10 x 10 x 7 m block of tuff as part of the unsaturated-zone (UZ) tracer test at Busted Butte. The test was designed to address uncertainties associated with flow and transport models within the Topopah Springs and Calico Hills tuffs. The tracer mixture included nonreactive (Br, I, and FBAs) and reactive tracers (Li, Ce, Sm, Ni, Coy and Mn) and synthetic colloids. Once injection was completed, samples from the block were collected in two ways. Overcores were taken from around and below injection holes. Then, the entire block was excavated via mineback--during which progressive vertical planes of the block were exposed. Samples from the overcores and mineback were analyzed to determine the distribution of tracers on different spatial scales than available from collection borehole data. Rock analyses confirmed collection pad results that the nonreactive tracers, Br and FBAs, moved several meters. Furthermore, Br and FBAs are observed above and lateral to the injector planes suggesting that capillarity was an important process for tracer movement. Lithium, the most mobile of the metals, was transported on a scale of meters. This is consistent with laboratory sorption measurements and observed breakthrough on the collection pads. Co and Ni show transport distances of tens of cm, while Sm and Ce moved far less, possibly due to precipitation and sorption effects. Colloid transport was assessed using 1 ft3 blocks extracted from the BB Phase 2 block. In the Calico Hills material, after 15 L of water was injected over 3.5 months, less than 1% of the colloids injected were recovered. Flow patterns in the block indicate that water injected at the center imbibed outward from the injection point. In a block taken from a boundary of the Calico Hills ashfall layer, breakthrough was observed only due to fractures formed during drying of the block. The colloid transport module for FEHM was tested against

  8. Geologic map of the Strawberry Butte 7.5’ quadrangle, Meagher County, Montana

    Science.gov (United States)

    Reynolds, Mitchell W.; Brandt, Theodore R.

    2017-06-19

    The 7.5′ Strawberry Butte quadrangle in Meagher County, Montana near the southwest margin of the Little Belt Mountains, encompasses two sharply different geologic terranes.  The northern three-quarters of the quadrangle are underlain mainly by Paleoproterozoic granite gneiss, across which Middle Cambrian sedimentary rocks rest unconformably.  An ancestral valley of probable late Eocene age, eroded northwest across the granite gneiss terrane, is filled with Oligocene basalt and overlying Miocene and Oligocene sandstone, siltstone, tuffaceous siltstone, and conglomerate.  The southern quarter of the quadrangle is underlain principally by deformed Mesoproterozoic sedimentary rocks of the Newland Formation, which are intruded by Eocene biotite hornblende dacite dikes.  In this southern terrane, Tertiary strata are exposed only in a limited area near the southeast margin of the quadrangle.  The distinct terranes are juxtaposed along the Volcano Valley fault zone—a zone of recurrent crustal movement beginning possibly in Mesoproterozoic time and certainly established from Neoproterozoic–Early Cambrian to late Tertiary time.  Movement along the fault zone has included normal faulting, the southern terrane faulted down relative to the northern terrane, some reverse faulting as the southern terrane later moved up against the northern terrane, and lateral movement during which the southern terrane likely moved west relative to the northern terrane.  Near the eastern margin of the quadrangle, the Newland Formation is locally the host of stratabound sulfide mineralization adjacent to the fault zone; west along the fault zone across the remainder of the quadrangle are significant areas and bands of hematite and iron-silicate mineral concentrations related to apparent alteration of iron sulfides.  The map defines the distribution of a variety of surficial deposits, including the distribution of hematite-rich colluvium and iron-silicate boulders.  The southeast

  9. Qualitative Aspects of the Solutions of a Mathematical Model for the Dynamic Analysis of the Reversible Chemical Reaction SO2(g)+1/2O2(g)<=>SO3(g) in a Catalytic Reactor

    CERN Document Server

    Wilfredo, Angulo

    2014-01-01

    We present some qualitative aspects concerning the solution to the mathematical model describing the dynamical behavior of the reversible chemical reaction SO2(g)+1/2O2(g)SO3(g) carried out in a catalytic reactor used in the process of sulfuric acid production.

  10. Qualitative Aspects of the Solutions of a Mathematical Model for the Dynamic Analysis of the Reversible Chemical Reaction SO2(g)+1/2O2(g)<=>SO3(g) in a Catalytic Reactor

    OpenAIRE

    Wilfredo, Angulo; Joyne, Contreras

    2014-01-01

    We present some qualitative aspects concerning the solution to the mathematical model describing the dynamical behavior of the reversible chemical reaction SO2(g)+1/2O2(g)SO3(g) carried out in a catalytic reactor used in the process of sulfuric acid production.

  11. Influence of Proton Irradiation on Angular Dependence of Second Generation (2G)HTS

    Energy Technology Data Exchange (ETDEWEB)

    Shiroyanagi, Y.; Greene, G.; Gupta, R.; Sampson, W.

    2011-05-01

    In the Facility for Rare Isotope Beams (FRIB) the quadrupoles in the fragment separator are exposed to very high radiation and heat loads. High Temperature Superconductors (HTS) are a good candidate for these magnets because they can be used at {approx}30-50 K and tolerate higher heat generation than Nb-Ti magnets. Radiation damage studies of HTS wires are crucial to ensure that they will survive in a high radiation environment. HTS wires from two vendors were studied. Samples of 2G HTS wires from SuperPower and American Superconductor (ASC) were irradiated with a 42 {mu}A, 142 MeV proton beam from the Brookhaven Linac Isotope Producer (BLIP). The angular dependence of the critical current was measured in magnetic fields at 77K.

  12. Magnetization Losses of Roebel Cable Samples with 2G YBCO Coated Conductor Strands

    CERN Document Server

    Yang, Y.; Falorio, I.; Young, E.A.; Kario, A.; Goldacker, W.; Dhallé, M. M. J.; van Nugteren, J.; Kirby, G.; Bottura, L.; Ballarino, A.

    2016-01-01

    Roebel cable with 2G YBCO strands is one of the promising HTS solutions of fully transposed high current conductors for high field accelerator magnets. Following the considerable research effort on the manufacturing of Roebel cables in recent years, sample conductors are now available in useful lengths with reproducible performances to allow detailed characterizations beyond the standard critical current measurements. The ac loss and strands coupling are of significant interest for the field quality of the accelerator magnets. We report a set of systematic ac loss measurements on two different Roebel cable samples prepared for the EuCARD2 collaboration. The measurements were performed over a wide range of temperature between 5 K and 90 K and the results were analyzed in the context of strands architecture and coupling. The results show that the transposed bundles are partially decoupled and the strands in transposition sections behave as an isolated single tape if the strands are insulated.

  13. TD-LTE与2G/3G网络互操作技术探讨

    Institute of Scientific and Technical Information of China (English)

    廖培英; 许俊迎

    2015-01-01

    随着TD-LTE网络的部署,网络制式现格局呈现多元化,为使现有网络能够协同发展使用,本文通过采用新的策略配置设计来实行TD-LTE和2G/3G网络的互操作方案,以发挥各网络优势,满足各目标用户群的差异化需求,为达到较好的互操作性能对现有网络升级提供了相关完善措施,供相关人员参考借鉴。

  14. Preliminary characterization of ST2G: Solar thermionic-thermoelectric generator for concentrating systems

    Science.gov (United States)

    Bellucci, Alessandro; Calvani, Paolo; Cappelli, Emilia; Orlando, Stefano; Sciti, Diletta; Yogev, Ronen; Kribus, Abraham; Trucchi, Daniele M.

    2015-06-01

    An innovative conversion module (CM) for concentrating solar power applications, named ST2G (Solar Thermionic-Thermoelectric Generator), has been developed and fabricated. The new technology is based on a solid-state converter that works at temperatures up to 1000 °C and exploits a double conversion stage: a thermionic stage and a thermoelectric one, connected thermally in series. Potentially, the CM could reach a combined solar energy-to-electrical efficiency larger than 30%, producing also additional thermal energy to be exploited as a co-generation. Different prototypes have been fabricated and the discussion on the technological key-points has been reported, relating them to the physical requirements necessary for an efficient conversion mechanism. The preliminary results obtained at a lab-level are here discussed, indicating low electrical power output, but also how to increase the performance by solving the identified issues.

  15. Optimal real-time distributed V2G and G2V management of electric vehicles

    Science.gov (United States)

    Stüdli, Sonja; Crisostomi, Emanuele; Middleton, Richard; Shorten, Robert

    2014-06-01

    This paper exploits the analogy between the electrical grid and modern communication networks to implement Electric Vehicle (EV) battery charging scheduling algorithms inspired by popular communication network techniques. In preliminary works, a similar approach was used to manage the Grid-to-Vehicle (G2V) active power flows. In this paper, we extend this framework to both implement the Vehicle-to-Grid (V2G) concept and to provide reactive power compensation capabilities that do not affect charging times. The ability of the proposed algorithms to optimally share the available/desired power in a fair way, with minimum communication requirements, in a very uncertain, dynamically changing framework, is illustrated through several examples for different scenarios of interest.

  16. Thermodynamic Enthalpy and Internal Energy in the Reaction System C10H8(s) +12O2(g)→10CO2(g)+4H2O(l)%燃烧反应C10H8(s) +12O2(g)→10CO2(g)+4H2O(l)的热力学焓和内能

    Institute of Scientific and Technical Information of China (English)

    高翔; 李鑫华; 汤思聪

    2003-01-01

    Thermodynamic enthalpy, ΔH and internal energy, ΔU in the reaction system C10H8 + 12O2→10CO2+4H2O are determined using an experimental method in our laboratory. Under the experimental conditions, the results calculated show that the reaction combustion enthalpy ΔH is -5093.3?kJ*mol-1 and internal energy ΔU is -5012 kJ*mol-1 on the basis of basic thermodynamic laws. The results are in good agreement with those calculated by theoretical methods. To understand the role of microstructure changes of the reactants and products in determining thermodynamic properties in the reaction system, contributions to entropy, ΔS, enthalpy, ΔH, and heat capacity, Cp(T), from melting and internal configuration change of reactants or products in the reaction are introduced and discussed.%用实验的方法测定了燃烧反应C10H8(s) +12O2(g)10CO2(g)+4H2O(l)的热力学焓ΔH和内能ΔU.根据热力学基本定律用实验数据计算结果表明该燃烧反应焓ΔH=-5093.3kJ.mol-1和反应内能ΔU=-5012kJ*mol-1,与理论计算结果相近似.为了了解反应物和产物的微观结构在该反应热力学性能中所起作用,介绍和讨论了在反应过程中反应物和产物的熔化和内部结构变化对反应熵S,焓H和热容Cp(T)的影响.

  17. Radiation Environment at GEO from the FY2G Satellite Observations

    Science.gov (United States)

    Wang, C.

    2016-12-01

    WANG Chun-Qin1,2*, Zhang Shen-Yi1,2 Jing Tao1,2, Zhang Huan-Xin1,2 Li Jia-Wei3 Zhang Xiao-Xin3 Sun Yue-Qiang1,2 Liang Jin-Bao1,2 Wei Fei1,2 Shen Guo-Hong1,2 Huang Cong3 Shi Chun-Yan1,21.National Space Science Center, Chinese Academy of Sciences, Beijing 100190, China; 2.Beijing Key Laboratory of Space Environment Exploration, Beijing 100190,China 3.National Satellite Meteorological Center, National Center for Space Weather, Beijing 100081, China; Abstract Recent measurements of the high energy electrons and protons with energetic particle instrument carried on the FY-2G satellite are presented. The instrument consist of two detectors-the high energy electrons instrument which can measure 200keV to greater than 4MeV electrons with eleven channels, and the high energy protons and heavy ions instrument which mainly senses incident flux of solar protons with seven channels from 4MeV to 300 MeV. The paper shows electrons and protons observations from Jan 2015 until Oct 2015. A precise description and preliminary analysis of particle dynamic during disturbances of magnetic storms、substorms and solar eruptions suggest that both of the detectors show accurate response to various disturbances and provide refined particles data. Comparison results of FY2G satellite with GOES series satellites reflect obvious local difference in particle flux evolvement especially during intensive disturbances time, which can be helpful for data assimilation of multi-satellite as well as further research in more complicated magnetosphere energy particle dynamic.

  18. Bone metabolism and formation generation bred mice in a 2G environment

    Science.gov (United States)

    Kita, S.; Iwasaki, K.; Shibata, S.; Onishi, R.; Ito, M.

    We examined the influence of G-force on bone formation (Exp.1) and bone metabolism (Exp.2) on generation bred mice in a 2G environment. [Materials and Method] We made the centrifugation G load breeding machine that we can breed mouse in G load environment. Exp.1: We measured the body length, length of thighbone and pelvis, width of thighbone, pelvis and fourth cervical vertebra in mature mice from the photograph of mice by X-ray. Exp.2: Calcium, phosphorus, magnesium and strontium were analyzed on thighbone, cervical vertebrae and lumbar vertebrae respectively. [Results] Exp.1: The result showed that the average of body length of control mice was 107.9+/-1.5 mm, a decrease approximately 7.9mm in body length in the G-forced mice. Length and width of thighbone and pelvis were miniaturized (length: 1.6%, width: 7.7% respectively) in the G-forced mice. However, width of cervical vertebrae in the Gforced mice was not different in control mice. Exp.2: The concentration of calcium and phosphorus of the thighbone in the G-forced mice was less than the control mice. However, that of the cervical vertebrae in G-forced mice was not different from the control mice. [Conclusion] Bone of mice adapted in a 2G environment. The results showed that the body length, thighbone and pelvis were miniaturized in the G-force mice. However, there were not any differences in the size of cervical vertebra. And cervical vertebra was promoted mineralization.

  19. Numerical and experimental evaluation of Nd:YAG laser welding efficiency in AZ31 magnesium alloy butt joints

    Science.gov (United States)

    Scintilla, Leonardo Daniele; Tricarico, Luigi

    2013-02-01

    In this paper, energy aspects related to the efficiency of laser welding process using a 2 kW Nd:YAG laser were investigated and reported. AZ31B magnesium alloy sheets 3.3 mm thick were butt-welded without filler using Helium and Argon as shielding gases. A three-dimensional and semi-stationary finite element model was developed to evaluate the effect of laser power and welding speed on the absorption coefficient, the melting and welding efficiencies. The modeled volumetric heat source took into account a scale factor, and the shape factors given by the attenuation of the beam within the workpiece and the beam intensity distribution. The numerical model was calibrated using experimental data on the basis of morphological parameters of the weld bead. Results revealed a good correspondence between experiment and simulation analysis of the energy aspects of welding. Considering results of mechanical characterization of butt joints previously obtained, the optimization of welding condition in terms of mechanical properties and energy parameters was performed. The best condition is represented by the lower laser power and higher welding speed that corresponds to the lower heat input given to the joint.

  20. PENGARUH BESAR ARUS LISTRIK DENGAN MENGGUNAKAN ELEKTRODA SMAW TERHADAP KEKUATAN SAMBUNGAN LAS BUTT JOINT PADA PLAT MILD STEEL

    Directory of Open Access Journals (Sweden)

    Sarjito Jokosisworo

    2012-03-01

    Full Text Available The influence of mechanic disposition, is one of the factor influence ship strength. This influence can be test by mechanical test in welding butt joint. The result test database analysis can be conclude that very helpful to increase safety and quality butt joint. With steel specification C= 0,15%, Si= 0,24%, Mn= 0,88%,P= 0,018%, S= 0,034%. This material give a 90, 110, 125 ampere with SMAW AC electrode diameter 3,2 mm x 350 mm with V root and 600 angle In the fabrication of mild steel products, components or equipment, manufacturers employ welding as the principal joining method. Mild steel are weldable materials, and a welded joint can provide optimum corrosion resistance, strength, and fabrication economy. However, designers should recognize that any metal, including stainless steels, may undergo certain changes during welding. It is necessary, therefore, to exercise a reasonable degree of care during welding to minimize or prevent any deleterious effects that may occur, and to preserve the same degree of corrosion resistance and strength in weld zone that is an intheren part of the base metal

  1. Metal loading in Soda Butte Creek upstream of Yellowstone National Park, Montana and Wyoming; a retrospective analysis of previous research; and quantification of metal loading, August 1999

    Science.gov (United States)

    Boughton, G.K.

    2001-01-01

    Acid drainage from historic mining activities has affected the water quality and aquatic biota of Soda Butte Creek upstream of Yellowstone National Park. Numerous investigations focusing on metals contamination have been conducted in the Soda Butte Creek basin, but interpretations of how metals contamination is currently impacting Soda Butte Creek differ greatly. A retrospective analysis of previous research on metal loading in Soda Butte Creek was completed to provide summaries of studies pertinent to metal loading in Soda Butte Creek and to identify data gaps warranting further investigation. Identification and quantification of the sources of metal loading to Soda Butte Creek was recognized as a significant data gap. The McLaren Mine tailings impoundment and mill site has long been identified as a source of metals but its contribution relative to the total metal load entering Yellowstone National Park was unknown. A tracer-injection and synoptic-sampling study was designed to determine metal loads upstream of Yellowstone National Park.A tracer-injection and synoptic-sampling study was conducted on an 8,511-meter reach of Soda Butte Creek from upstream of the McLaren Mine tailings impoundment and mill site downstream to the Yellowstone National Park boundary in August 1999. Synoptic-sampling sites were selected to divide the creek into discrete segments. A lithium bromide tracer was injected continuously into Soda Butte Creek for 24.5 hours. Downstream dilution of the tracer and current-meter measurements were used to calculate the stream discharge. Stream discharge values, combined with constituent concentrations obtained by synoptic sampling, were used to quantify constituent loading in each segment of Soda Butte Creek.Loads were calculated for dissolved calcium, silica, and sulfate, as well as for dissolved and total-recoverable iron, aluminum, and manganese. Loads were not calculated for cadmium, copper, lead, and zinc because these elements were infrequently

  2. Grid Interconnection and Performance Testing Procedures for Vehicle-To-Grid (V2G) Power Electronics: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, W.; Chakraborty, S.; Kroposki, B.; Hoke, A.; Martin, G.; Markel, T.

    2012-03-01

    Bidirectional power electronics can add vehicle-to-grid (V2G) capability in a plug-in vehicle, which then allows the vehicle to operate as a distributed resource (DR). The uniqueness of the battery-based V2G power electronics requires a test procedure that will not only maintain IEEE interconnection standards, but can also evaluate the electrical performance of the vehicle working as a DR. The objective of this paper is to discuss a recently published NREL technical report that provides interim test procedures for V2G vehicles for their integration into the electrical distribution systems and for their performance in terms of continuous output power, efficiency, and losses. Additionally, some other test procedures are discussed that are applicable to a V2G vehicle that desires to provide power reserve functions. A few sample test results are provided based on testing of prototype V2G vehicles at NREL.

  3. An Intelligent Approach for Dense Urban Area in existing 2G / 2.5G

    CERN Document Server

    Katiyar, Sumit; Agrawal, Prof N K

    2012-01-01

    In the prevailing scenario audio, video, data services (i.e. internet), multimedia and broadcasting etc. are being integrated. Decreasing cell size increases capacity but at the same time increases fluctuation and interference too. The intelligence approach is the only answer in developing countries where frequency and power are scarce resources. In this paper, we have tried to integrate all proven technologies in networking such as in-building network, micro zone, intelligent micro cell, deployment along city streets, tunnels, subway coverage etc. along with adaptive frequency allocation in hierarchical approach with the help of adaptive / intelligent antenna system. A-SDMA approach will further enhance spectral efficiency as well as QoS (Quality of Service). It can be proved beyond doubt that this integrated approach will convert 2G / 2.5G systems capable of handling the prevailing demand at reduced cost. In addition to it, integrated approach will save power and reduce RF pollution. In this paper we have e...

  4. Water molecules inside protein structure affect binding of monosaccharides with HIV-1 antibody 2G12.

    Science.gov (United States)

    Ueno-Noto, Kaori; Takano, Keiko

    2016-10-05

    Water molecules inside biomolecules constitute integral parts of their structure and participate in the functions of the proteins. Some of the X-ray crystallographic data are insufficient for analyzing a series of ligand-protein complexes in the same condition. We theoretically investigated antibody binding abilities of saccharide ligands and the effects of the inner water molecules of ligand-antibody complexes. Classical molecular dynamics and quantum chemical simulations using a model with possible water molecules inside the protein were performed with saccharide ligands and Human Immunodeficiency Virus 1 neutralizing antibody 2G12 complexes to estimate how inner water molecules of the protein affect the dynamics of the complexes as well as the ligand-antibody interaction. Our results indicate the fact that d-fructose's strong affinity to the antibody was partly due to the good retentiveness of solvent water molecules of the ligand and its stability of the ligand's conformation and relative position in the active site. © 2016 Wiley Periodicals, Inc.

  5. Automated paleomagnetic and rock magnetic data acquisition with an in-line horizontal "2G" system

    Science.gov (United States)

    Mullender, Tom A. T.; Frederichs, Thomas; Hilgenfeldt, Christian; de Groot, Lennart V.; Fabian, Karl; Dekkers, Mark J.

    2016-09-01

    Today's paleomagnetic and magnetic proxy studies involve processing of large sample collections while simultaneously demanding high quality data and high reproducibility. Here we describe a fully automated interface based on a commercial horizontal pass-through "2G" DC-SQUID magnetometer. This system is operational at the universities of Bremen (Germany) and Utrecht (Netherlands) since 1998 and 2006, respectively, while a system is currently being built at NGU Trondheim (Norway). The magnetometers are equipped with "in-line" alternating field (AF) demagnetization, a direct-current bias field coil along the coaxial AF demagnetization coil for the acquisition of anhysteretic remanent magnetization (ARM) and a long pulse-field coil for the acquisition of isothermal remanent magnetization (IRM). Samples are contained in dedicated low magnetization perspex holders that are manipulated by a pneumatic pick-and-place-unit. Upon desire samples can be measured in several positions considerably enhancing data quality in particular for magnetically weak samples. In the Bremen system, the peak of the IRM pulse fields is actively measured which reduces the discrepancy between the set field and the field that is actually applied. Techniques for quantifying and removing gyroremanent overprints and for measuring the viscosity of IRM further extend the range of applications of the system. Typically c. 300 paleomagnetic samples can be AF demagnetized per week (15 levels) in the three-position protocol. The versatility of the system is illustrated by several examples of paleomagnetic and rock magnetic data processing.

  6. Analisa Penerapan Teknologi UMTS Untuk Mengatasi Permasalahan Kapasitas Pada Jaringan 2G (GSM

    Directory of Open Access Journals (Sweden)

    Alfin Hikmaturokhman

    2012-05-01

    Full Text Available A high necesarry data service and bigger network capacity becomes a critical issue in the GSM network. One of the good and bad size parameter reference-quality GSM network can be viewed on the performance parameters MLSLOT Allocation Blocking. The default value for parameter MLSLOT Allocation Blocking are ? 40 % that the network is otherwise well. To overcome these problems it is applied to UMTS technology. The study was conducted to determine how the performance of the 2G PT Indosat Tbk. Before  and after the application of technology and how it compares to the performance of UMTS cellular network PT Indosat Tbk. before and after implementation of a UMTS network. In conducting this study the authors to collect the necessary data and did the interview if the supervisor does not know From the research the average value MLSlot Bocking Allocation has decreased, for the first sector decreased on average uplink 0.70% to 0.17% down 0.53%.The average downlink 26.49% to 14.98% down 11.51%. Sector 2 uplink average 0.24% to 0.00% down 0.24%, the average downlink 5.16% to 0.04% down 5.12%, Sector 3 uplink average 0.6% to 0.21% down 0.39%, the average downlink 23.99% to14.98%  down 9.01%.

  7. A study on the required performance of a 2G HTS wire for HTS wind power generators

    Science.gov (United States)

    Sung, Hae-Jin; Park, Minwon; Go, Byeong-Soo; Yu, In-Keun

    2016-05-01

    YBCO or REBCO coated conductor (2G) materials are developed for their superior performance at high magnetic field and temperature. Power system applications based on high temperature superconducting (HTS) 2G wire technology are attracting attention, including large-scale wind power generators. In particular, to solve problems associated with the foundations and mechanical structure of offshore wind turbines, due to the large diameter and heavy weight of the generator, an HTS generator is suggested as one of the key technologies. Many researchers have tried to develop feasible large-scale HTS wind power generator technologies. In this paper, a study on the required performance of a 2G HTS wire for large-scale wind power generators is discussed. A 12 MW class large-scale wind turbine and an HTS generator are designed using 2G HTS wire. The total length of the 2G HTS wire for the 12 MW HTS generator is estimated, and the essential prerequisites of the 2G HTS wire based generator are described. The magnetic field distributions of a pole module are illustrated, and the mechanical stress and strain of the pole module are analysed. Finally, a reasonable price for 2G HTS wire for commercialization of the HTS generator is suggested, reflecting the results of electromagnetic and mechanical analyses of the generator.

  8. Effect of Nd:YAG laser beam welding on weld morphology and mechanical properties of Ti-6Al-4V butt joints and T-joints

    Science.gov (United States)

    Kashaev, Nikolai; Ventzke, Volker; Fomichev, Vadim; Fomin, Fedor; Riekehr, Stefan

    2016-11-01

    A Nd:YAG single-sided laser beam welding process study for Ti-6Al-4V butt joints and T-joints was performed to investigate joining techniques with regard to the process-weld morphology relationship. An alloy compatible filler wire was used to avoid underfills and undercuts. The quality of the butt joints and T-joints was characterized in terms of weld morphology, microstructure and mechanical properties. Joints with regular shapes, without visible cracks, pores, and geometrical defects were achieved. Tensile tests revealed high joint integrity in terms of strength and ductility for both the butt joint and T-joint geometries. Both the butt joints and T-joints showed base material levels of strength. The mechanical performance of T-joints was also investigated using pull-out tests. The performance of the T-joints in such tests was sensitive to the shape and morphology of the welds. Fracture always occurred in the weld without any plastic deformation in the base material outside the weld.

  9. Intensity of quartz cathodoluminescence and trace-element content in quartz from the porphyry copper deposit at Butte, Montana

    Science.gov (United States)

    Rusk, B.G.; Reed, M.H.; Dilles, J.H.; Kent, A.J.R.

    2006-01-01

    Textures of hydrothermal quartz revealed by cathodoluminescence using a scanning electron microscope (SEM-CL) reflect the physical and chemical environment of quartz formation. Variations in intensity of SEM-CL can be used to distinguish among quartz from superimposed mineralization events in a single vein. In this study, we present a technique to quantify the cathodoluminescent intensity of quartz within individual and among multiple samples to relate luminescence intensity to specific mineralizing events. This technique has been applied to plutonic quartz and three generations of hydrothermal veins at the porphyry copper deposit in Butte, Montana. Analyzed veins include early quartz-molybdenite veins with potassic alteration, pyrite-quartz veins with sericitic alteration, and Main Stage veins with intense sericitic alteration. CL intensity of quartz is diagnostic of each mineralizing event and can be used to fingerprint quartz and its fluid inclusions, isotopes, trace elements, etc., from specific mineralizing episodes. Furthermore, CL intensity increases proportional to temperature of quartz formation, such that plutonic quartz from the Butte quartz monzonite (BQM) that crystallized at temperatures near 750 ??C luminesces with the highest intensity, whereas quartz that precipitated at ???250 ??C in Main Stage veins luminesces with the least intensity. Trace-element analyses via electron microprobe and laser ablation-ICP-MS indicate that plutonic quartz and each generation of hydrothermal quartz from Butte is dominated by characteristic trace amounts of Al, P, Ti, and Fe. Thus, in addition to CL intensity, each generation of quartz can be distinguished based on its unique trace-element content. Aluminum is generally the most abundant element in all generations of quartz, typically between 50 and 200 ppm, but low-temperature, Main Stage quartz containing 400 to 3600 ppm Al is enriched by an order of magnitude relative to all other quartz generations. Phosphorous

  10. Research on networking scheme of the architecture of PCC in 2G/3G packet switched core network%PCC架构在2G/3G融合网络中组网方案研究

    Institute of Scientific and Technical Information of China (English)

    卫涛; 孙逊; 卜忠贵

    2012-01-01

      This paper briefly introduce the PCC standard architecture and control strategy, and research on the networking scheme of architecture of PCC in 2G/3G network.%  本文简要介绍了PCC标准架构及管控策略,并对PCC架构在2G/3G融合网络中的组网方案进行研究。

  11. The speciation of iodine in the salt impacted Black Butte soil series along the Virgin river, Nevada, USA

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, Spencer M. [Department of Chemistry, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States)], E-mail: spencer.steinberg@unlv.edu; Buck, Brenda; Morton, Janice [Department of Geoscience, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States); Dorman, James [Department of Chemistry, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States)

    2008-12-15

    Salt-impacted soils occur in floodplains, wetlands and backswamps in arid climates. These soils become sinks or temporary storage sites for soluble salts and contaminants including agricultural chemicals, industrial pollutants and radionuclides such as {sup 129}I. The vertical distribution of I in the Black Butte soil series along the Virgin river was assessed and the distribution of I between I{sup -}, IO{sub 3}{sup -} and organically bound I was determined. The speciation of I was compared to the organic C content, specific components of the organic C, and clay content. This study indicates that organic I was the most abundant form of I in these soil samples and that the content of organic I generally correlated to total organic matter and lignin (as measured by chemolysis) of the samples.

  12. Reconnaissance of ground-water resources in the vicinity of Gunnison and Crested Butte, West-central Colorado

    Science.gov (United States)

    Giles, T.F.

    1980-01-01

    Hydrologic data was collected in the Gunnison-Crested Butte area , Colo., to determine the availability and chemical quality of groundwater. Parts of the area have undergone rapid population growth in recent years due to an increase of winter sports activities. This rapid growth has resulted in a demand for additional domestic, recreational, and municipal water supplies. Maximum yields of 100 gallons per minute are available from wells completed in the alluvial aquifers while as much as 60 gallons per minute may be obtained from wells completed in the Dakota and Entrada Sandstones. Yields from other aquifers generally are less than 25 gallons per minute. Calcium magnesium bicarbonate water is the predominant water type in the study area. Dissolved solids concentrations ranged from 30 to 829 milligrams per liter and hardness ranged from 18 to 400 milligrams per liter. (USGS)

  13. Formation of carburized layer structure with reverted austenite on low-carbon martensitic steel 12Kh2G2NMFT

    Science.gov (United States)

    Ivanov, A. S.; Bogdanova, M. V.

    2013-03-01

    The structure of surface layer in low-carbon martensitic steel 12Kh2G2NMFT obtained by carburizing followed by high-temperature tempering and quenching from the intercritical temperature range is investigated.

  14. Analgesic efficacy and safety of intravenous paracetamol (acetaminophen) administered as a 2g starting dose following third molar surgery

    DEFF Research Database (Denmark)

    Juhl, Gitte Irene; Nørholt, Sven E.; Tønnesen, Else Kirstine

    2006-01-01

    BACKGROUND: The recommended dose for intravenous (IV) paracetamol injection in adults is 1g, however pharmacokinetic and pharmacodynamic findings suggest that a better analgesia could be obtained with a 2g starting dose. METHODS: A single-centre, randomised, double-blind, placebo-controlled, 3......-parallel group study was performed to demonstrate the analgesic efficacy and safety of IV paracetamol 2g. Following third molar surgery, patients reporting moderate to severe pain received a single 15-min infusion of either IV paracetamol 2g, IV paracetamol 1g or placebo. Efficacy and safety were evaluated...... over 8h. Laboratory tests were performed before and 48h after drug administration. RESULTS: Two hundred and ninety seven patients (132=IV paracetamol 2g; 132=IV paracetamol 1g; 33=placebo) were randomised and completed the study. The summed pain relief over 6h (TOTPAR6) was significantly superior...

  15. Validation of Multi-Scale Simulations of the Flow over Big Southern Butte Using Weather Research and Forecasting Model

    Science.gov (United States)

    Kosovic, B.; Jimenez, P. A.

    2015-12-01

    Advances in high performance computational resources and frameworks now make possible the use of Numerical Weather Predication (NWP) models for high-resolution simulations of atmospheric flows. In order to develop best practices, standards, and procedures for multi-scale simulations, we need to carry out extensive validation of NWP models across unprecedented range of scales from hundreds of kilometers to tens of meters. However, there are limited observational data available for evaluating high-resolution models. Recently, Nunalee et al (2015) validated large-eddy simulations (LES) using WRF for flow and dispersion based on the Cinder Cone Butte experiment carried out in Idaho in 1982. This study involved moderately complex terrain. We now extend the study to a significantly more complex terrain based on a more recent field study in Idaho. This field study include two experiments: the first one carried out in 2010 and centered on the Big Southern Butte (BSB) and the second in 2011 centered on the Salmon River Canyon both in Idaho (Butler et al., 2015). As a first step, here we focus on using the observations from the BSB experiment to validate multi-scale simulations using the WRF model. We carry out both mesoscale simulations and large-eddy simulations (LES). Nested mesoscale simulations are carried out using the innermost nest with grid cell size of 300m while nested WRF-LES are carried with grid cell size of ~50m. We analyze the performance of PBL scheme in mesoscale simulations and the resulting interplay between subgrid parameterization and numerical advection scheme in LES. The results of this analysis are used to assess performance of PBL schemes in complex terrain where the assumption of horizontal homogeneity on which these schemes are based are violated and to suggest the modifications to PBL scheme to account for the effect of heterogeneity.

  16. CXCR4特异性拮抗剂SDF-1P2G54的构建及活性评价%Construction of SDF-1P2G54, a specific antagonist of CXCR4

    Institute of Scientific and Technical Information of China (English)

    杨飞华; 龙北国; 谭毅; 龚雅; 马伟峰

    2012-01-01

    目的 对SDF-1进行遗传改造,将其第2位氨基酸由脯氨酸(P)突变为甘氨酸(G),且缺失其C-端α螺旋结构,以获得一种CXCR4特异性拮抗剂SDF- 1P2G54.方法 将PCR扩增的SDF-1突变体SDF-1p2g54的基因插入表达载体pET-30a(+),并转化BL21(DE3)菌株.IPTG诱导表达的重组蛋白SDF-1P2G54在变性条件下采用镍柱亲和层析纯化,并通过梯度稀释和超滤方法得以复性.利用趋化实验鉴定SDF-1P2G54对Jurkat细胞的趋化活性及对SDF-1趋化活性的抑制效应,流式细胞仪检测SDF-1P2G54诱导MOLT4细胞钙内流及细胞表面CXCR4内在化的能力.结果 SDF-1P2G54完全丧失激活CXCR4、趋化Jurkat细胞跨膜迁移和诱导MOLT4细胞钙内流的能力,却保持了与CXCR4的高亲和性,能有效抑制野生型SDF-1对Jurkat的趋化效应、诱导MOLT4细胞表面CXCR4的快速内在化.结论 SDF-1P2G54是一种新型的CXCR4特异性拮抗剂,具有开发成抑制HIV-1感染和癌细胞转移等重大疾病特效药物的潜在应用价值.%Objective To obtain a specific antagonist of CXCR4, SDF-1P2G54 by mutating SDF-1 second proline (P) into glycin (G) and removing the a-helix of its C-terminal. Methods SDF-lp2g54 gene amplified by PCR was inserted into the vector pET-30a (+) and transformed into Escherichia coli (E. Coli) strain BL21. After IPTG induction of E. Coli, the expressed recombinant protein was purified with nickel-affinity chromatography column under denaturing conditions and refolded with gradient dilution and ultra-filtration. The chemotactic effect of SDF-1P2G54 on Jurkat cells and its antagonistic effect against SDF-1 were determined by transwell assay; flow cytometry was used to assay the ability of SDF-1 P2G54 to induce calcium influx and CXCR4 internalization in MOLT4 cells. Results The recombinant protein SDF-1P2G54 completely lost the functions to activate CXCR4 or to induce transmembrane migration of Jurkat cells and calcium influx in MOLT4 cells, but maintained a

  17. Kinetic mechanism for HIV-1 neutralization by antibody 2G12 entails reversible glycan binding that slows cell entry.

    Science.gov (United States)

    Platt, Emily J; Gomes, Michelle M; Kabat, David

    2012-05-15

    Despite structural knowledge of broadly neutralizing monoclonal antibodies (NMAbs) complexed to HIV-1 gp120 and gp41 envelope glycoproteins, virus inactivation mechanisms have been difficult to prove, in part because neutralization assays are complex and were previously not understood. Concordant with recent evidence that HIV-1 titers are determined by a race between entry of cell-attached virions and competing inactivation processes, we show that NMAb 2G12, which binds to gp120 N-glycans with α (1, 2)-linked mannose termini and inhibits replication after passive transfer into patients, neutralizes by slowing entry of adsorbed virions. Accordingly, apparent neutralization is attenuated when a kinetically competing virus inactivation pathway is blocked. Moreover, removing 2G12 from media causes its dissociation from virions coupled to accelerated entry and restored infectivity, demonstrating the reversibility of neutralization. A difference between 2G12 dissociation and infectivity recovery rates implies that the inhibited complexes at virus-cell junctions contain several 2G12's that must dissociate before entry commences. Quantitative microscopy of 2G12 binding and dissociation from single virions and studies using a split CCR5 coreceptor suggest that 2G12 competitively inhibits interactions between gp120's V3 loop and the tyrosine sulfate-containing CCR5 amino terminus, thereby reducing assembly of complexes that catalyze entry. These results reveal a unique reversible kinetic mechanism for neutralization by an antibody that binds near a critical V3 region in the glycan shield of gp120.

  18. The Vaporization of B2O3(l) to B2O3(g) and B2O2(g)

    Science.gov (United States)

    Jacobson, Nathan S.; Myers, Dwight L.

    2011-01-01

    The vaporization of B2O3 in a reducing environment leads to formation of both B2O3(g) and B2O2(g). While formation of B2O3(g) is well understood, many questions about the formation of B2O2(g) remain. Previous studies using B(s) + B2O3(l) have led to inconsistent thermodynamic data. In this study, it was found that after heating, B(s) and B2O3(l) appear to separate and variations in contact area likely led to the inconsistent vapor pressures of B2O2(g). To circumvent this problem, an activity of boron is fixed with a two-phase mixture of FeB and Fe2B. Both second and third law enthalpies of formation were measured for B2O2(g) and B2O3(g). From these the enthalpies of formation at 298.15 K are calculated to be -479.9 +/- 41.5 kJ/mol for B2O2(g) and -833.4 +/- 13.1 kJ/mol for B2O3(g). Ab initio calculations to determine the enthalpies of formation of B2O2(g) and B2O3(g) were conducted using the W1BD composite method and show good agreement with the experimental values.

  19. HIV-1特异性单抗2G12单价抗体的构建及活性分析%Construction and activity analysis of HIV specific monovalent mAb 2G12

    Institute of Scientific and Technical Information of China (English)

    冯一帆; 刘雪; 徐柯; 冯霞; 曾毅; 余双庆

    2015-01-01

    Objective To construct monovalent form IgG antibodies and compare their binding and neutralizing activity with parent antibody.Methods To obtain the monovalent form HIV-1 specific antibody 2G12 with 1 Fab and 1 Fc (2G12-tH),an expression vector containing DNA encoding the IgG1 hinge,CH2 and CH3 domain exons was constructed and co-transfected with the plasmids expressing 2G12 heavy and light chains.To obtain the half molecule form 2G12 (2G12-HM),the disulfide bond at hinge region and the stable non-covalent bonds in CH2,CH3 regions were removed by site-directed mutation on 2G12 heavy chain gene.The mutated heavy chain gene was co-transfected with light chain expressing plasmid.Purified 2G12-tH and 2G12-HM were analyzed by non-reducing SDS-PAGE.The antigen specific binding and neutralizing activity against HIV-1 was compared with parent IgG by ELISA and micro-neutralizing assay.Results Two forms of monovalent 2G12 antibody,2G12-tH and 2G12-HM,were constructed and expressed correctly.Both 2G12-tH and 2G12-HM effectively combined with HIV-1 Env.The results of neutralizing assay based on six pseudoviruses of HIV-1 subtype B indicated that monovalent form antibodies had similar neutralizing activity with IgG.Conclusions Two forms of monovalent antibody were successfully constructed.The binding and neutralizing activity of monovalent form antibodies were similar to that of parent IgG antibody.%目的 构建单价抗体并与IgG比较结合活性及中和活性的差异.方法 对IgG1抗体重链恒定区基因进行改造,分别构建N端截短型的IgG1重链恒定区基因IgG1-tH和去除绞链区二硫键及CH2、CH3区的稳定非共价键的2G12重链基因2G12-HM.将IgG1-tH与2G12抗体重链和轻链基因表达质粒共转染293T细胞,表达含有完整Fc的单价抗体;将2G12-HM和轻链基因表达质粒共转染293T细胞,表达半分子型的单价抗体.通过非还原SDS-PAGE对表达抗体的大小进行鉴定,并用ELISA和微量中和实验比较原型2

  20. Power grid operation risk management: V2G deployment for sustainable development

    Science.gov (United States)

    Haddadian, Ghazale J.

    The production, transmission, and delivery of cost--efficient energy to supply ever-increasing peak loads along with a quest for developing a low-carbon economy require significant evolutions in the power grid operations. Lower prices of vast natural gas resources in the United States, Fukushima nuclear disaster, higher and more intense energy consumptions in China and India, issues related to energy security, and recent Middle East conflicts, have urged decisions makers throughout the world to look into other means of generating electricity locally. As the world look to combat climate changes, a shift from carbon-based fuels to non-carbon based fuels is inevitable. However, the variability of distributed generation assets in the electricity grid has introduced major reliability challenges for power grid operators. While spearheading sustainable and reliable power grid operations, this dissertation develops a multi-stakeholder approach to power grid operation design; aiming to address economic, security, and environmental challenges of the constrained electricity generation. It investigates the role of Electric Vehicle (EV) fleets integration, as distributed and mobile storage assets to support high penetrations of renewable energy sources, in the power grid. The vehicle-to-grid (V2G) concept is considered to demonstrate the bidirectional role of EV fleets both as a provider and consumer of energy in securing a sustainable power grid operation. The proposed optimization modeling is the application of Mixed-Integer Linear Programing (MILP) to large-scale systems to solve the hourly security-constrained unit commitment (SCUC) -- an optimal scheduling concept in the economic operation of electric power systems. The Monte Carlo scenario-based approach is utilized to evaluate different scenarios concerning the uncertainties in the operation of power grid system. Further, in order to expedite the real-time solution of the proposed approach for large-scale power systems

  1. Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding

    Science.gov (United States)

    2013-05-01

    bainite and/or martensite 1212—Volume 22(5) May 2013 Journal of Materials Engineering and Performance The procedure described above is used to construct...phases/ microconstituents, primarily bainite , martensite and retained austenite. As it is generally difficult to make a clear distinction between...Widmanstatten ferrite and bainite , austenite to bainite phase transformation is not modeled explicitly, and it is simply lumped with the austenite to

  2. Volume Entropy

    CERN Document Server

    Astuti, Valerio; Rovelli, Carlo

    2016-01-01

    Building on a technical result by Brunnemann and Rideout on the spectrum of the Volume operator in Loop Quantum Gravity, we show that the dimension of the space of the quadrivalent states --with finite-volume individual nodes-- describing a region with total volume smaller than $V$, has \\emph{finite} dimension, bounded by $V \\log V$. This allows us to introduce the notion of "volume entropy": the von Neumann entropy associated to the measurement of volume.

  3. Singularity-conquering ZG controllers of z2g1 type for tracking control of the IPC system

    Science.gov (United States)

    Zhang, Yunong; Yu, Xiaotian; Yin, Yonghua; Peng, Chen; Fan, Zhengping

    2014-09-01

    With wider investigations and applications of autonomous robotics and intelligent vehicles, the inverted pendulum on a cart (IPC) system has become more attractive for numerous researchers due to its concise and representative structure. In this article, the tracking-control problem of the IPC system is considered and investigated. Based on Zhang dynamics (ZD) and gradient dynamics (GD), a novel kind of ZG controllers are developed and investigated for achieving the tracking-control purpose, which contains controllers of z2g0 and z2g1 types according to the number of times of using the ZD and GD methods. Besides, theoretical analyses are presented to guarantee the global and exponential convergence performance of both z2g0 and z2g1 controllers. Computer simulations are further performed to substantiate the feasibility and effectiveness of ZG controllers. More importantly, comparative simulation results demonstrate that controllers of z2g1 type can conquer the singularity problem (i.e. the division-by-zero problem).

  4. Primate-specific evolution of noncoding element insertion into PLA2G4C and human preterm birth

    Directory of Open Access Journals (Sweden)

    Fellman Vineta

    2010-12-01

    Full Text Available Abstract Background The onset of birth in humans, like other apes, differs from non-primate mammals in its endocrine physiology. We hypothesize that higher primate-specific gene evolution may lead to these differences and target genes involved in human preterm birth, an area of global health significance. Methods We performed a comparative genomics screen of highly conserved noncoding elements and identified PLA2G4C, a phospholipase A isoform involved in prostaglandin biosynthesis as human accelerated. To examine whether this gene demonstrating primate-specific evolution was associated with birth timing, we genotyped and analyzed 8 common single nucleotide polymorphisms (SNPs in PLA2G4C in US Hispanic (n = 73 preterm, 292 control, US White (n = 147 preterm, 157 control and US Black (n = 79 preterm, 166 control mothers. Results Detailed structural and phylogenic analysis of PLA2G4C suggested a short genomic element within the gene duplicated from a paralogous highly conserved element on chromosome 1 specifically in primates. SNPs rs8110925 and rs2307276 in US Hispanics and rs11564620 in US Whites were significant after correcting for multiple tests (p PLA2G4C activity. Conclusions Our findings suggest that variation in PLA2G4C may influence preterm birth risk by increasing levels of prostaglandins, which are known to regulate labor.

  5. Relationship between IRS-2G1057D variant and type 2 diabetes mellitus in Han population in Liaoning Province, China

    Institute of Scientific and Technical Information of China (English)

    KONG Ling-fang; QIAN Cong; ZHENG Xiao-min; HOU Yong-sheng; LI Qiang; LIU Guo-liang

    2005-01-01

    @@ The two major pathogeneses of type 2 diabetes mellitus (T2DM) are insulin resistance and insulin secretion deficiency. During recent years, researches on the molecular target sites of insulin resistance and the mechanism of the signal transduction has made great progress: especially, the study of insulin receptor substrate-2 (IRS-2). Human IRS-2 gene is located at 13q8.6. IRS-2G1057D is a replacement of G (glycine) by D (aspartic acid) at site 1057 of insulin receptor substrate-2, which is caused by simple nucleotide polymorphism. The role of this variant is still not clear. We detected IRS-2G1057D variant in Han population in Liaoning Province by measuring body mass index (BMI), waistline/hip ratio (WHR) and other parameters of insulin secretion, as well as insulin action to explore the relationship between IRS-2G1057D variant and T2DM.

  6. Integration of V2H/V2G Hybrid System for Demand Response in Distribution Network

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yubo; Sheikh, Omar; Hu, Boyang; Chu, Chi-Cheng; Gadh, Rajit

    2014-11-03

    Integration of Electrical Vehicles (EVs) with power grid not only brings new challenges for load management, but also opportunities for distributed storage and generation in distribution network. With the introduction of Vehicle-to-Home (V2H) and Vehicle-to-Grid (V2G), EVs can help stabilize the operation of power grid. This paper proposed and implemented a hybrid V2H/V2G system with commercialized EVs, which is able to support both islanded AC/DC load and the power grid with one single platform. Standard industrial communication protocols are implemented for a seamless respond to remote Demand Respond (DR) signals. Simulation and implementation are carried out to validate the proposed design. Simulation and implementation results showed that the hybrid system is capable of support critical islanded DC/AC load and quickly respond to the remote DR signal for V2G within 1.5kW of power range.

  7. Nesprin-2G, a Component of the Nuclear LINC Complex, Is Subject to Myosin-Dependent Tension.

    Science.gov (United States)

    Arsenovic, Paul T; Ramachandran, Iswarya; Bathula, Kranthidhar; Zhu, Ruijun; Narang, Jiten D; Noll, Natalie A; Lemmon, Christopher A; Gundersen, Gregg G; Conway, Daniel E

    2016-01-01

    The nucleus of a cell has long been considered to be subject to mechanical force. Despite the observation that mechanical forces affect nuclear geometry and movement, how forces are applied onto the nucleus is not well understood. The nuclear LINC (linker of nucleoskeleton and cytoskeleton) complex has been hypothesized to be the critical structure that mediates the transfer of mechanical forces from the cytoskeleton onto the nucleus. Previously used techniques for studying nuclear forces have been unable to resolve forces across individual proteins, making it difficult to clearly establish if the LINC complex experiences mechanical load. To directly measure forces across the LINC complex, we generated a fluorescence resonance energy transfer-based tension biosensor for nesprin-2G, a key structural protein in the LINC complex, which physically links this complex to the actin cytoskeleton. Using this sensor we show that nesprin-2G is subject to mechanical tension in adherent fibroblasts, with highest levels of force on the apical and equatorial planes of the nucleus. We also show that the forces across nesprin-2G are dependent on actomyosin contractility and cell elongation. Additionally, nesprin-2G tension is reduced in fibroblasts from Hutchinson-Gilford progeria syndrome patients. This report provides the first, to our knowledge, direct evidence that nesprin-2G, and by extension the LINC complex, is subject to mechanical force. We also present evidence that nesprin-2G localization to the nuclear membrane is altered under high-force conditions. Because forces across the LINC complex are altered by a variety of different conditions, mechanical forces across the LINC complex, as well as the nucleus in general, may represent an important mechanism for mediating mechanotransduction.

  8. Technical Letter Report - Preliminary Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, Susan L.; Cumblidge, Stephen E.; Doctor, Steven R.; Hall, Thomas E.; Anderson, Michael T.

    2008-05-29

    The U.S. Nuclear Regulatory Commission (NRC) has a multi-year program at the Pacific Northwest National Laboratory (PNNL) to provide engineering studies and assessments of issues related to the use of nondestructive evaluation (NDE) methods for the reliable inspection of nuclear power plant components. As part of this program, there is a subtask 2D that was set up to address an assessment of issues related to the NDE of high density polyethylene (HDPE) butt fusion joints. This work is being driven by the nuclear industry wanting to employ HDPE materials in nuclear power plant systems. This being a new material for use in nuclear applications, there are a number of issues related to its use and potential problems that may evolve. The industry is pursuing ASME Code Case N-755 entitled “Use of Polyethylene (PE) Plastic Pipe for Section III, Division 1, Construction and Section XI Repair/Replacement Activities” that contains the requirements for nuclear power plant applications of HDPE. This Code Case requires that inspections be performed after the fusion joint is made by visually examining the bead that is formed and conducting a pressure test of the joint. These tests are only effective in general if gross through-wall flaws exist in the fusion joint. The NRC wants to know whether a volumetric inspection can be conducted on the fusion joint that will reliably detect lack-of-fusion conditions that may be produced during joint fusing. The NRC has requested that the work that PNNL is conducting be provided to assist them in resolving this inspection issue of whether effective volumetric NDE can be conducted to detect lack of fusion (LOF) in the butt HDPE joints. PNNL had 24 HDPE pipe specimens manufactured of 3408 material to contain LOF conditions that could be used to assess the effectiveness of NDE in detecting the LOF. Basic ultrasonic material properties were measured and used to guide the use of phased arrays and time-of-flight diffraction (TOFD) work that

  9. Search for E(2g) phonon modes in MgB2 single crystals by point-contact spectroscopy.

    Science.gov (United States)

    Naidyuk, Yu G; Yanson, I K; Kvitnitskaya, O E; Lee, S; Tajima, S

    2003-05-16

    The electron-phonon interaction in magnesium diboride MgB2 single crystals is investigated by point-contact (PC) spectroscopy. For the first time the electron coupling with E(2g) phonon modes is resolved in the PC spectra. The correlation between intensity of the extremely broad E(2g) modes in the PC spectra and value of the superconducting gap is established. Our observations favor current theoretical models for electron-phonon mediated superconductivity in MgB2, and they better match the harmonic phonon model.

  10. Polymorphisms in PLA2G6 and PLA2G4C genes for calcium-independent phospholipase A2 do not contribute to attenuated niacin skin flush response in schizophrenia patients.

    Science.gov (United States)

    Nadalin, S; Radović, I; Buretić-Tomljanović, A

    2015-09-01

    We hypothesized that attenuated niacin skin flushing in schizophrenia patients might be associated with polymorphic variants in PLA2G6 and PLA2G4C genes (rs4375 and rs1549637 variations) which encode calcium-independent phospholipase A2 beta (iPLA2β) and cytosolic phospholipase A2 gamma (cPLA2γ) enzymes. The iPLA2β and cPLA2γ may play an important role in niacin-mediated signaling; in addition to their major role - mediating phospholipids remodeling, which alters membrane receptors and signal transduction, they regulate the reservoir of arachidonic acid for prostaglandins synthesis. Skin response to topical niacin of 0.1M, 0.01M, 0.001M and 0.0001M concentrations in 75 schizophrenia patients was rated using the method of volumetric niacin response (VNR). Neither PLA2G6 nor PLA2G4C gene polymorphisms were significantly associated with VNR values. Furthermore, polymorphisms׳ synergy on niacin skin flushing was also not detected.

  11. PRELIMINARY ASSESSMENT OF NDE METHODS ON INSPECTION OF HDPE BUTT FUSION PIPING JOINTS FOR LACK OF FUSION WITH VALIDATION FROM MECHANICAL TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, Susan L.; Doctor, Steven R.; Cinson, Anthony D.; Watts, Michael W.; Moran, Traci L.; Anderson, Michael T.

    2010-07-22

    Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, are being conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high density polyethylene (HDPE) pipe for assessing lack of fusion. The work provides information to the United States Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from preliminary assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high speed tensile impact test and the bend test for determining joint integrity. A series of butt joints were fabricated in 3408, 12 inch (30.5 cm) IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack of fusion conditions. Six of these butt joints were volumetrically examined with time of flight diffraction (TOFD), phased array (PA) ultrasound, and the Evisive microwave system. The outer diameter (OD) weld beads were removed for microwave evaluation and the pipes ultrasonically re-evaluated. In two of the six pipes both the outer and inner diameter (ID) weld beads were removed and the pipe joints re-evaluated. Several of the pipes were sectioned and the joints destructively evaluated with the following techniques: high speed tensile test, bend test, and focused immersion ultrasound on a joint section removed from the pipe coupled with slicing through the joint and examining the revealed surfaces. The fusion parameters, nondestructive, and destructive evaluation results will be correlated to validate the effectiveness of what each NDE technology detects and what each does not detect. This is an initial limited study which will aid in identifying key future work.

  12. Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion with Validation from Mechanical Testing

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Michael T.; Cinson, Anthony D.; Crawford, Susan L.; Doctor, Steven R.; Moran, Traci L.; Watts, Michael W.

    2010-12-01

    Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, are being conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high-density polyethylene (HDPE) pipe for assessing lack of fusion. The work provides information to the U.S. Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from preliminary assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high-speed tensile impact test and the side-bend test for determining joint integrity. A series of butt joints were fabricated in 3408, 12-in. IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack-of-fusion conditions. Six of these butt joints were volumetrically examined with time-of-flight diffraction (TOFD), phased-array (PA) ultrasound, and the Evisive microwave system. The outer-diameter weld beads were removed for the microwave inspection. In two of the four pipes, both the outer and inner weld beads were removed and the pipe joints re-evaluated. The pipes were sectioned and the joints destructively evaluated with the side-bend test by cutting portions of the fusion joint into slices that were planed and bent. The last step in this limited study will be to correlate the fusion parameters, nondestructive, and destructive evaluation results to validate the effectiveness of what each NDE technology detects and what each does not detect. The results of the correlation will be used in identifying any future work that is needed.

  13. Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

    Science.gov (United States)

    Deng, Dean; Zhang, Chaohua; Pu, Xiaowei; Liang, Wei

    2017-03-01

    Both experimental method and numerical simulation technology were employed to investigate welding residual stress distribution in a SUS304 steel multi-pass butt-welded joint in the current study. The main objective is to clarify the influence of strain hardening model and the yield strength of weld metal on prediction accuracy of welding residual stress. In the experiment, a SUS304 steel butt-welded joint with 17 passes was fabricated, and the welding residual stresses on both the upper and bottom surfaces of the middle cross section were measured. Meanwhile, based on ABAQUS Code, an advanced computational approach considering different plastic models as well as annealing effect was developed to simulate welding residual stress. In the simulations, the perfect plastic model, the isotropic strain hardening model, the kinematic strain hardening model and the mixed isotropic-kinematic strain hardening model were employed to calculate the welding residual stress distributions in the multi-pass butt-welded joint. In all plastic models with the consideration of strain hardening, the annealing effect was also taken into account. In addition, the influence of the yield strength of weld metal on the simulation result of residual stress was also investigated numerically. The conclusions drawn by this work will be helpful in predicting welding residual stresses of austenitic stainless steel welded structures used in nuclear power plants.

  14. Interfacial Microstructure and Mechanical Properties of Al/Mg Butt Joints Made by MIG Welding Process with Zn-Cd Alloy as Interlayer

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hongtao; DAI Xiangyu; FENG Jicai

    2014-01-01

    Butt joints between Mg alloy AZ31B and pure Al 1 060 sheets were produced via metal inert gas welding process with Zn-Cd alloy foil. Crack-free Al/Mg butt joints between AZ31B Mg alloy and pure Al 1060 sheets were obtained. Intermetallic compound layer 1 and layer 2 had formed in fusion zone/Mg alloy and the average thickness of the layer 1 was about 50μm. The intermetallic compound layer 1 consisted of Al12Mg17 and Mg2Si phases while layer 2 consisted of Al12Mg17, Mg2Si and MgZn2 phases. The crack started from the IMC layer at the bottom of the joint and propagated along the brittle IMC layer, then expanded into weld metal during the SEM in situ tensile test. The highest tensile strength of the dissimilar metal butt joints could reach 46.8 MPa and the effect of interfacial IMC layer on mechanical property of the joint was discussed in detail in the present study.

  15. Duodenal ulcer healing on 2 g of sucralfate daily at bedtime compared to 1 g four times daily

    DEFF Research Database (Denmark)

    Bendtsen, Flemming; Ebbehøj, N; Fallingborg, J

    1990-01-01

    Seventy-seven patients with endoscopically verified duodenal ulcers were randomized to treatment with either 2 g sucralfate daily at bedtime or 1 g sucralfate q.d.s. in a controlled double-blind comparative study. After a 4-week treatment period, the healing rate was 68% for the former and 69...

  16. A multistage coordinative optimization for sitting and sizing P2G plants in an integrated electricity and natural gas system

    DEFF Research Database (Denmark)

    Zeng, Q.; Fang, J.; Chen, Z.

    2016-01-01

    sited and sized in the integrated energy system. The problem model is formulated as a multi-stage integer nonlinear optimization. The objective is to minimize the investment plus operation costs by determining the optimal location, capacity, and installation time of P2G. Case studies are simulated...

  17. Charge and bilateral discharge of battery in hybrid vehicles with ability of reactive power compensation with technology V2G

    Directory of Open Access Journals (Sweden)

    Sajad Davtalab

    2016-09-01

    Full Text Available Posing V2G theory for hybrid vehicles can create opportunities on the operation of the grid, and can even put it in row of renewable energy sources. One of the needs in the operation of power systems on which is special attention is voltage control and reactive power of grid. Hybrid cars with V2G capability can be utilized for this work and is the subject of this article.An appropriate control method for reactive power control of grid by using V2G is suggested in this article. Reactive powers, dc-link voltage and reactive power in the suggested control method are independent and can be controlled separately. Section of battery and transducer of hybrid vehicle with V2G capability have been simulated and the suggested controller has been applied to it in order to evaluate the suggested control method. The results achieved from the simulation show that reactive power injected into the grid or received from it can be controlled independent of its reactive power with appropriate transient state.

  18. MYDOCGA: MODIS/Aqua Ocean Reflectance Daily L2G-Lite Global 1 km SIN Grid Version 6

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Version 6 Level 2 Gridded (L2G) Ocean Reflectance product consists of 1 kilometer reflectance data from MODIS bands 8-16. The product is referred to as ocean...

  19. MODOCGA: MODIS/Terra Ocean Reflectance Daily L2G-Lite Global 1 km SIN Grid Version 6

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Version 6 Level 2 Gridded (L2G) Ocean Reflectance product consists of 1 kilometer reflectance data from MODIS bands 8-16. The product is referred to as ocean...

  20. MODTBGA: MODIS/Terra Thermal Bands Daily L2G Global 1 km SIN Grid Version 6

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Version 6 MODIS Level 2 Gridded (L2G) Thermal Band product consists of brightness temperature data from MODIS bands 20, 31, and 32 and albedo data from band 20...

  1. Enhanced quench propagation in 2G-HTS coils co-wound with stainless steel or anodised aluminium tapes

    Science.gov (United States)

    Núñez-Chico, A. B.; Martínez, E.; Angurel, L. A.; Navarro, R.

    2016-08-01

    Early quench detection and thermal stability of superconducting coils are of great relevance for practical applications. Magnets made with second generation high temperature superconducting (2G-HTS) tapes present low quench propagation velocities and therefore slow voltage development and high local temperature rises, which may cause irreversible damage. Since quench propagation depends on the anisotropy of the thermal conductivity, this may be used to achieve an improvement of the thermal stability and robustness of 2G-HTS coils. On pancake type coils, the thermal conductivity along the tapes (coil’s azimuthal direction) is mostly fixed by the 2G-HTS tape characteristics, so that the reduction of anisotropy relies on the improvement of the radial thermal conductivity, which depends on the used materials between superconducting tapes, as well as on the winding and impregnation processes. In this contribution, we have explored two possibilities for such anisotropy reduction: by using anodised aluminium or stainless steel tapes co-wound with the 2G-HTS tapes. For all the analysed coils, critical current distribution, minimum quench energy values and both tangential and radial quench propagation velocities at different temperatures and currents are reported and compared with the results of similar coils co-wound with polyimide (Kapton®) tapes.

  2. Degradation of Tectilon Yellow 2G by hybrid technique: combination of sonolysis and biodegradation using mutant Pseudomonas putida.

    Science.gov (United States)

    Srinivasan, Raman; Kathiravan, Mathur Nadarajan; Gopinath, Kannappan Panchamoorthy

    2011-02-01

    Degradation of Tectilon Yellow 2G (TY2G), an azo dye has been studied by hybrid technique involving pretreatment by sonochemical method and further biological treatment by Pseudomonas putida mutant. Pretreatment experiments were carried out by sonolysis of the dye solution at different concentrations (100-1000 mg/L). Wild type Gram-negative P. putida species isolated from the textile effluent contaminated soil, which was found to be effective towards dye degradation, has been acclimatized so as to consume TY2G as the sole source of nutrition. Mutant strain was obtained from the acclimatized species by random mutagenesis using the chemical mutagen ethidium bromide for various time intervals (6-30 min). The optimum mutagenesis exposure time for obtaining the most efficient species for dye degradation was found to be 18 min. An efficient mutant strain P. putida ACT 1 has been isolated and was used for growth experiments. The mutant strain showed a better growth compared to the wild strain. The substrate utilization kinetics has been modeled using Monod and Haldane model equations of which the Haldane model provided a better fit. The enzyme kinetics of the mutant and wild species was obtained using Michaelis-Menten equation. The mutated species showed better enzyme kinetics towards the degradation of TY2G.

  3. MYDTBGA: MODIS/AQUA Thermal Bands Daily L2G Global 1 km SIN Grid Version 6

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Version 6 MODIS Level 2 Gridded (L2G) Thermal Band product consists of brightness temperature data from MODIS bands 20, 31, and 32 and albedo data from band 20...

  4. Duodenal ulcer healing on 2 g of sucralfate daily at bedtime compared to 1 g four times daily

    DEFF Research Database (Denmark)

    Bendtsen, Flemming; Ebbehøj, N; Fallingborg, J;

    1990-01-01

    Seventy-seven patients with endoscopically verified duodenal ulcers were randomized to treatment with either 2 g sucralfate daily at bedtime or 1 g sucralfate q.d.s. in a controlled double-blind comparative study. After a 4-week treatment period, the healing rate was 68% for the former and 69...

  5. Photocatalytic decomposition of N2O over TiO2/g-C3N4 photocatalysts heterojunction

    Science.gov (United States)

    Kočí, K.; Reli, M.; Troppová, I.; Šihor, M.; Kupková, J.; Kustrowski, P.; Praus, P.

    2017-02-01

    TiO2/g-C3N4 photocatalysts with the various TiO2/g-C3N4 weight ratios from 1:2 to 1:6 were fabricated by mechanical mixing in water suspension followed by calcination. Pure TiO2 was prepared by thermal hydrolysis and pure g-C3N4 was prepared from commercial melamine by thermal annealing at 620 °C. All the nanocomposites were characterized by X-ray powder diffraction, UV-vis diffuse reflectance spectroscopy, Raman spectroscopy, infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, photoelectrochemical measurements and nitrogen physisorption. The prepared mixtures along with pure TiO2 and g-C3N4 were tested for the photocatalytic decomposition of nitrous oxide under UVC (λ = 254 nm), UVA (λ = 365 nm) and Vis (λ > 400 nm) irradiation. The TiO2/g-C3N4 nanocomposites showed moderate improvement compared to pure g-C3N4 but pure TiO2 proved to be a better photocatalyst under UVC irradiation. However, under UVA irradiation conditions, the photocatalytic activity of TiO2/g-C3N4 (1:2) nanocomposite exhibited an increase compared to pure TiO2. Nevertheless, further increase of g-C3N4 amount leads/led to a decrease in reactivity. These results are suggesting the nanocomposite with the optimal weight ratio of TiO2 and g-C3N4 have shifted absorption edge energy towards longer wavelengths and decreased the recombination rate of charge carriers compared to pure g-C3N4. This is probably due to the generation of heterojunction on the TiO2/g-C3N4 interface.

  6. Controllable synthesis of CeO2/g-C3N4 composites and their applications in the environment.

    Science.gov (United States)

    She, Xiaojie; Xu, Hui; Wang, Hefei; Xia, Jiexiang; Song, Yanhua; Yan, Jia; Xu, Yuanguo; Zhang, Qi; Du, Daolin; Li, Huaming

    2015-04-21

    This research has developed a photocatalytic reactor that includes circulating water, light, and a temperature control system. CeO2/g-C3N4 composites with high photocatalytic activity and stability were synthesized by a simple and facile hydrothermal method. The obtained photocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). It was found that in the CeO2/g-C3N4 composites, the CeO2 nanoparticles were homogeneously cubic in shape (from 3 to 10 nm) and were evenly dispersed on the surface of the g-C3N4. At constant temperature (30 °C), 5% CeO2/g-C3N4 photocatalyst showed the best photocatalytic activity for degrading organic dye methylene blue (MB) under visible light irradiation. The photocatalytic reaction for degrading MB followed first-order kinetics and 5% CeO2/g-C3N4 exhibited a higher apparent rate of 1.2686 min(-1), 7.8 times higher than that of the pure g-C3N4 (0.1621 min(-1)). In addition, it was found that 5% CeO2/g-C3N4 had a new property that it could be used as a sensor for the determination of trace amounts of Cu(2+). Such unique design and one-step synthesis, with an exposed high-activity surface, are important for both technical applications and theoretical investigations.

  7. Study of Simulated Temperature of Butt Joint during Friction Stir Welding Of Aluminium Alloy by Using Hyperworks

    Directory of Open Access Journals (Sweden)

    Mohd Anees Siddiqui

    2015-01-01

    Full Text Available Friction stir welding (FSW is one of the latest welding technology that utilizes a special tool for generation of frictional heat in the work piece by its rotation due to which joining occurs without melting of metal. For this reason friction stir welding lies under the category of solid state joining. A part from experimental work, there is large space to work on simulation of FSW by using simulation tools. In the present paper, simulation of friction stir welding of aluminium alloy AA-6061 is done by using HyperWeld module of Altair HyperWorks. The virtual experiment of friction stir welding is conducted for variable tool rotational speeds with constant travelling speed and study of simulation results of variation in temperature distribution along the weld line of butt joint is done. The results of simulation shows that the temperature is symmetrically distributed along the weld line. It is observed that the maximum temperature along the weld line increases with the increase in rotational speed. It is also observed that the temperature at advancing side is greater that retreating side.

  8. Analysis on the joint tensile strength and fractography of TiNi shape memory alloy precise pulse resistance butt welding

    Institute of Scientific and Technical Information of China (English)

    赵熹华; 韩立军; 赵蕾

    2002-01-01

    This paper studies mechanical property and fractography of the welded joints obtained in different welding parameters such as welding heat and welding press with/without gas shield in TiNi shape memory alloy precise pulse resistance butt welding using tensile strength test, XRD, SEM and TEM measures. The optimum welding parameters obtaining high tensile strength welded joint are got. On the condition of welding press magneting current 2 A and welding heat 75%, the joint strength is the highest. This is important for to study other properties of TiNi shape memory alloy further. The experimental results state that argon gas shield have different effects on different welding parameters, less on welding press, but great on welding heat. But excessive welding press and welding heat have great effects on joint tensile strength. Too high welding heat can produce the new intermetallic compound, this intermetallic compound lead to dislocation density to increase and form the potential crack initiation, which can easily make the joint fracture under stress effect and decrease the shape memory ratio of joint for high density dislocation groups existing in the twinned martensite.

  9. Thermal and mechanical properties of e-beam irradiated butt-fusion joint in high-density polyethylene pipes

    Science.gov (United States)

    Vijayan, Vipin; Pokharel, Pashupati; Kang, Min Kwan; Choi, Sunwoong

    2016-05-01

    The effects of electron beam irradiation on the thermal and mechanical properties of a butt-fusion joint in high density polyethylene (HDPE) pipes were investigated. Differential scanning calorimetry, X-ray diffraction, and Fourier transform infra-red spectroscopy of welded samples revealed the changes of crystallinity due to the cross linking effect of electron beam irradiation. The suppression of the degree of crystallinity with increasing the irradiation dose from 0 kGy to 500 kGy indicated that the e-beam radiation induced cross-links among the polymer chains at the weld zone. The cross-link junction at the joint of HDPE pipe prevented chain folding and reorganization leading to the formation of imperfect crystallites with smaller size and also less in content. Tensile test of the welded samples with different dose of e-beam irradiation showed the increased values of the yield stress and Young's modulus as a function of irradiation dose. On the other hand, the elongation at break diminished clearly with increasing the irradiation doses.

  10. Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt Joint

    Directory of Open Access Journals (Sweden)

    Sare Celik

    2016-05-01

    Full Text Available Friction Stir Welding (FSW is a solid-state welding process used for welding similar and dissimilar materials. FSW is especially suitable to join sheet Al alloys, and this technique allows different material couples to be welded continuously. In this study, 1050 Al alloys and commercially pure Cu were produced at three different tool rotation speeds (630, 1330, 2440 rpm and three different tool traverse speeds (20, 30, 50 mm/min with four different tool position (0, 1, 1.5, 2 mm by friction stir welding. The influence of the welding parameters on the microstructure and mechanical properties of the joints was investigated. Tensile and bending tests and microhardness measurements were used to determine the mechanical properties. The microstructures of the weld zone were investigated by optical microscope and scanning electron microscope (SEM and were analyzed in an energy dispersed spectrometer (EDS. Intermetallic phases were detected based on the X-ray diffraction (XRD analysis results that evaluated the formation of phases in the weld zone. When the welding performance of the friction stir welded butt joints was evaluated, the maximum value obtained was 89.55% with a 1330 rpm tool rotational speed, 20 mm/min traverse speed and a 1 mm tool position configuration. The higher tensile strength is attributed to the dispersion strengthening of the fine Cu particles distributed over the Al material in the stir zone region.

  11. Effects of Gap Width and Groove on the Mechanical Properties of Butt Joint Between Aluminum Alloy and Stainless Steel

    Institute of Scientific and Technical Information of China (English)

    Honggang DONG; Chuanqing LIAO

    2013-01-01

    Butt joining of 5A02 aluminum alloy to 304 stainless steel sheets was conducted using gas tungsten arc welding process with Al-12%Si (wt.%,the same below) and Zn-15%Al flux-cored filler wires.The effects of gap width and groove in steel side on the microstructure and tensile strength of the resultant joints were investigated.For the joint made with 0 mm-wide gap and without groove in steel side,severe incomplete brazing zone occurred along the steel side and bottom surfaces,and consequently seriously deteriorated the joint strength.However,presetting 1.5 mm-wide gap or with groove in steel side could promote the wetting of molten filler metal on the faying surfaces,and then significantly enhance the resultant joint strength.Moreover,post-weld heat treatment could further improve the tensile strength of the joints.During tensile testing,the specimens from the joints made with Al-12%Si flux-cored filler wire fractured through the weld or interfacial layer,but those from the heat-treated joints made with Zn-15%Al flux-cored filler wire fractured in the aluminum base metal.

  12. Arrested diatreme development: Standing Rocks East, Hopi Buttes, Navajo Nation, USA

    Science.gov (United States)

    Lefebvre, Nathalie S.; White, James D. L.; Kjarsgaard, Bruce A.

    2016-01-01

    Maar-diatreme volcanoes, defined by their relatively large pyroclastic debris-filled subsurface structures and craters that cut into the pre-eruptive land surface, are typically found in small-volume mafic to ultramafic monogenetic volcanic fields. Diatremes are associated with strong explosions throughout most of their development, focused along feeder dikes and generally attributed to magma-water interaction, or high magmatic volatiles. Detailed mapping of the magnificently exposed Standing Rocks East (SRE) diatreme shows evidence of additional eruptive complexity, and offers new insights into how the plumbing and vent structures of small-volume volcanoes evolve during an eruption. SRE is part of a larger, basanitic volcanic complex that includes several diatremes formed along a series of irregular, offset NW-SE trending dikes exposed 300 m below the pre-eruptive land surface. Its similarly oriented elliptical-shaped diatreme structure comprises predominantly country rock lithic-rich breccia of coarse inhomogeneously mixed wall-rock blocks sourced from above and below the current surface, plus sparse juvenile material. Domains of pyroclastic deposits crosscut the country rock breccia deposits, and the best exposed is the NW massif rising 35 m above the current erosional surface. It represents a cross-section of an evolving crater floor, and comprises matrix-rich lapilli tuff and spatter deposits cut by irregularly distributed dikes, some with very complex textures. The most significant deposit, in terms of volume, is an unbedded lapilli tuff that is poorly sorted and has a well-mixed population of wall-rock and juvenile clast varieties, thus resembling deposits typical of diatremes. It is overlain by and locally intercalated with spatter deposits, and this irregular contact demarcates the base of what was during eruption an uneven, evolving crater floor. The generally massive, variably welded spatter deposits constitute mostly lapilli-sized juvenile clasts with

  13. 应用于V2G的AC/DC矩阵变换器%AC/DC Matrix Converters for V2G Applications

    Institute of Scientific and Technical Information of China (English)

    王辉; 粟梅; 孙尧; 李幸; 韩华; 张关关

    2013-01-01

    Due to the problems of battery voltage adaptation and power-volume ratio and system efficiency of the pulse width modulation (PWM) voltage source rectifier (VSR)in vehicle to grid (V2G) systems,this paper presents a solution based on AC/DC matrix converter topology for the V2G Against the characteristic of relatively large charging current ripple in the classical current space vector modulation strategy,a sectional optimized modulation strategy that can reduce the charging current ripple within the whole output range was proposed.The comparative analysis was made between the classical current space vector modulation strategy and the proposed strategy.The simulation and experimental results demonstrate the validity and effectiveness of the proposed sectional optimized modulation strategy.%由于当前V2G系统中普遍采用的电压型脉宽调制(pulse width modulation,PWM)整流方案中所存在的蓄电池电压匹配、功率体积比及系统效率问题,提出一种采用AC/DC矩阵变换器的解决方案.针对经典电流空间矢量调制策略中充电电流纹波较大的缺点,提出一种在全输出范围内减小充电电流纹波的分段优化调制策略,并深入对比分析这两种调制策略下充电电流纹波的大小.仿真和实验结果表明,所提分段优化调制策略的正确性和可行性.

  14. Prediction and Clone of T Cell Epitope Region of HSV-2 gD Protein%单纯疱疹病毒2 gD蛋白T细胞表位区的预测及克隆

    Institute of Scientific and Technical Information of China (English)

    樊建勇; 杨慧兰; 关蕾; 王颖; 仕瑶慧

    2007-01-01

    目的 预测并克隆单纯疱疹病毒2 gD蛋白T细胞抗原表位集中区.方法 根据相关计算机软件和互联网服务器进行表位预测;提取单纯疱疹病毒2基因组,用特异性引物扩增预测的gD蛋白T细胞抗原表位集中区基因,酶切后将目的 基因插入载体pGEX-4T-1,对重组载体酶切及测序鉴定.结果 预测得到了单纯疱疹病毒2 gD蛋白T细胞抗原表位集中区,构建成功重组载体pGEX-gD,经测序确认序列正确.结论 单纯疱疹病毒2 gD蛋白T细胞表位集中区的成功预测及克隆可为今后单纯疱疹病毒疫苗的研究打下基础.

  15. Electronic, magnetic, and optical characteristics of half-semiconductor double perovskite oxide Sr2CrOsO6 governed by 3d (t2g3)-5d (t2g3) antiferromagnetic coupling

    Science.gov (United States)

    H.-E., M. Musa Saad

    2016-07-01

    In this study, motivated by observations of the remarkable magnetic insulating nature and high Curie temperature (TC=725 K) of double perovskite oxide Sr2CrOsO6, the electronic, magnetic, and optical characteristics of Sr2CrOsO6 were determined using the full potential linear muffin-tin orbital method according to density functional theory. The spin-orbit coupling contribution was included in the local spin density approximation (LSDA) and generalized gradient approximation (GGA). In addition, the Coulomb repulsion (U) and Hund's exchange (J) energies were considered in both methods (LSDA+U and GGA+U). Full structural optimization confirmed that the ground state of Sr2CrOsO6 is face-centered cubic (Fm-3m symmetry). Calculations predicted that Sr2CrOsO6 is ferrimagnetic half-semiconductive (HSC) due to the vertical hopping of t2g electrons via antiferromagnetic coupling [Cr3+ (t2g3↑)-O (2pπ)-Os5+ (t2g3↓)], which agreed with the experimental results. The HSC energy-gaps originate from the splitting of three partially occupied Os5+ (5d) bands into two fully filled bands and one empty spin-down band. The real ε1 (ω) and imaginary ε2 (ω) parts of the dielectric function ε (ω) and energy-loss spectrum L (ω) were calculated, analyzed, and compared with the electronic results.

  16. Higher frequency of certain cancers in LRRK2 G2019S mutation carriers with Parkinson disease: a pooled analysis.

    Science.gov (United States)

    Agalliu, Ilir; San Luciano, Marta; Mirelman, Anat; Giladi, Nir; Waro, Bjorg; Aasly, Jan; Inzelberg, Rivka; Hassin-Baer, Sharon; Friedman, Eitan; Ruiz-Martinez, Javier; Marti-Masso, Jose Felix; Orr-Urtreger, Avi; Bressman, Susan; Saunders-Pullman, Rachel

    2015-01-01

    Patients with Parkinson disease (PD) who harbor LRRK2 G2019S mutations may have increased risks of nonskin cancers. However, the results have been inconsistent across studies. To analyze pooled data from 5 centers to further examine the association between LRRK2 G2019S mutation and cancer among patients with PD and to explore factors that could explain discrepancies. Clinical, demographic, and genotyping data as well as cancer outcomes were pooled from 1549 patients with PD recruited across 5 movement disorders clinics located in Europe, Israel, and the United States. Associations between LRRK2 G2019S mutation and the outcomes were examined using mixed-effects logistic regression models to estimate odds ratios (ORs) and 95% CIs. Models were adjusted for age and ethnicity (Ashkenazi Jewish vs others) as fixed effects and study center as a random effect. All cancers combined, nonskin cancers, smoking-related cancers, hormone-related cancers, and other types of cancer. The overall prevalence of the LRRK2 G2019S mutation was 11.4% among all patients with PD. Mutation carriers were younger at PD diagnosis and more likely to be women (53.1%) and of Ashkenazi Jewish descent (76.8%) in comparison with individuals who were not mutation carriers. The LRRK2 G2019S mutation carriers had statistically significant increased risks for nonskin cancers (OR, 1.62; 95% CI, 1.04-2.52), hormone-related cancers (OR, 1.87; 95% CI, 1.07-3.26) and breast cancer (OR, 2.34; 95% CI, 1.05-5.22) in comparison with noncarriers. There were no associations with other cancers. There were no major statistically significant differences in the results when the data were stratified by Ashkenazi Jewish ethnicity; however, there was some evidence of heterogeneity across centers. This multinational study from 5 centers demonstrates that LRRK2 G2019S mutation carriers have an overall increased risk of cancer, especially for hormone-related cancer and breast cancer in women. Larger prospective cohorts or

  17. Fabrication of AgFeO2/g-C3N4 nanocatalyst with enhanced and stable photocatalytic performance

    Science.gov (United States)

    Tang, Dandan; Zhang, Gaoke

    2017-01-01

    This work reported a novel AgFeO2/g-C3N4 composite with enhanced photocatalytic activity, which was fabricated by a simple precipitation method. The g-C3N4 sheets with thickness of 2•4 nm were successfully loaded on the surface of the AgFeO2 particles. As compared to pure AgFeO2 and pure g-C3N4, the as-prepared AgFeO2/g-C3N4 photocatalysts exhibited superior absorption in the visible-light region and displayed promising visible-light photocatalytic performance in the degradation of organic contaminations both in water and in air. About 94% of Acid red G (ARG) can be degraded by the optimized AgFeO2/g-C3N4 sample, which is ∱/47.5 and ∱/410.7 times higher than that by pure AgFeO2 and pure g-C3N4, respectively. Meanwhile, it can also effectively degrade ∱/487% of gaseous formaldehyde to CO2 within 9 h. The enhanced photocatalytic property and stability of the AgFeO2/g-C3N4 composite can be attributed to its specific nanostructure, effective electron-hole separation and the formation of Z-scheme heterostructure between AgFeO2 and g-C3N4. This work could provide new and helpful insights into the photocatalytic application of Ag-based delafossite materials.

  18. Identification of Novel Compound Mutations in PLA2G6-Associated Neurodegeneration Patient with Characteristic MRI Imaging.

    Science.gov (United States)

    Guo, Sen; Yang, Liu; Liu, Huijie; Chen, Wei; Li, Jinchen; Yu, Ping; Sun, Zhong Sheng; Chen, Xiang; Du, Jie; Cai, Tao

    2016-07-09

    Neurodegeneration with brain iron accumulation comprises a heterogeneous group of disorders characterized clinically by progressive motor dysfunction. Accurate identification of de novo and rare inherited mutations is important for determining causative genes of undiagnosed neurological diseases. In the present study, we report a unique case with cerebellar ataxia symptoms and social communication difficulties in an intermarriage family. MRI showed a marked cerebellar atrophy and the "eye-of-the-tiger"-like sign in the medial globus pallidus. Potential genetic defects were screened by whole-exome sequencing (WES) for the patient and four additional family members. A previously undescribed de novo missense mutation (c.1634A>G, p.K545R) in the exon 12 of the PLA2G6 gene was identified. A second rare variant c.1077G>A at the end of exon 7 was also identified, which was inherited from the mother, and resulted in a frame-shift mutation (c.1074_1077del.GTCG) due to an alternative splicing. In conclusion, the identification of the "eye-of-the-tiger"-like sign in the globus pallidus of the patient expands the phenotypic spectrum of PLA2G6-associated disorders and reveals its value in differential diagnosis of PLA2G6-associated disorders.

  19. Effect of Ultrahigh Frequency Radiation Emitted from 2G Cell Phone on Developing Lens of Chick Embryo: A Histological Study

    Directory of Open Access Journals (Sweden)

    Mary Hydrina D'Silva

    2014-01-01

    Full Text Available A Mobile phone in operation emits a pulsed radiofrequency electromagnetic field which is absorbed into the user’s body particularly the head region. Contradictory scientific reports on the health effect of nonionizing radiations on biological tissues have prompted to undertake the present study to evaluate the damage in the developing lens of a chick embryo following exposure to radiation emitted from a 2G cell phone. Fertilized chick embryos were incubated in two groups in a standard egg incubator. The experiment group was exposed to radiation emitted from a 2G cell phone. On completion of scheduled duration, the embryos were collected and processed for routine histological studies. The 9th to 12th day chick embryo eyes were processed for assessment of DNA damage using the alkaline comet assay technique. The lens thickness and the equatorial diameter were measured using oculometer and statistically compared for both groups. In the present study, the exposure of chick embryos to a 2G cell phone caused structural changes in lens epithelial cells, formation of cystic cells and spaces, distortion of lens fibers, and formation of posterior aberrant nuclear layer. The DNA damage in the developing eyes of the experiment group assessed by comet assay was highly significant.

  20. A Herpes Simplex Virus 2 (HSV-2) gD Mutant Impaired for Neural Tropism Is Superior to an HSV-2 gD Subunit Vaccine To Protect Animals from Challenge with HSV-2

    Science.gov (United States)

    Goodman, Kyle N.; Li, Daniel Y.; Raffeld, Mark; Chavez, Mayra

    2015-01-01

    ABSTRACT A recent phase 3 trial with soluble herpes simplex virus 2 (HSV-2) glycoprotein D (gD2t) in adjuvant failed to show protection against genital herpes. We postulated that live attenuated HSV-2 would provide more HSV antigens for induction of virus-specific antibodies and cellular immunity than would gD2t. We previously reported an HSV-2 mutant, HSV2-gD27, in which the nectin-1 binding domain of gD2 is altered so that the virus is impaired for infecting neural cells, but not epithelial cells, in vitro and is impaired for infecting dorsal root ganglia in mice (K. Wang, J. D. Kappel, C. Canders, W. F. Davila, D. Sayre, M. Chavez, L. Pesnicak, and J. I. Cohen, J Virol 86:12891–12902, 2012, doi:10.1128/JVI.01055-12). Here we report that the mutations in HSV2-gD27 were stable when the virus was passaged in cell culture and during acute infection of mice. HSV2-gD27 was attenuated in mice when it was inoculated onto the cornea, intramuscularly (i.m.), intravaginally, and intracranially. Vaccination of mice i.m. with HSV2-gD27 provided better inhibition of challenge virus replication in the vagina than when the virus was used to vaccinate mice intranasally or subcutaneously. Comparison of i.m. vaccinations with HSV2-gD27 versus gD2t in adjuvant showed that HSV2-gD27 induced larger reductions of challenge virus replication in the vagina and reduced latent viral loads in dorsal root ganglia but induced lower serum neutralizing antibody titers than those obtained with gD2t in adjuvant. Taken together, our data indicate that a live attenuated HSV-2 vaccine impaired for infection of neurons provides better protection from vaginal challenge with HSV-2 than that obtained with a subunit vaccine, despite inducing lower titers of HSV-2 neutralizing antibodies in the serum. IMPORTANCE Genital herpes simplex is one of the most prevalent sexually transmitted diseases. Though HSV-2 disease is usually mild, it can be life threatening in neonates and immunocompromised persons. In

  1. Persistent impacts of trace metals from mining on floodplain grass communities along Soda Butte Creek, Yellowstone National Park

    Energy Technology Data Exchange (ETDEWEB)

    Stoughton, J.A.; Marcus, W.A.

    2000-03-01

    In Yellowstone National Park, tailings and associated trace metals from past mining have been deposited along 28 km of Soda Butte Creek by large flood events. This study documents grass species diversity, density, and biomass; trace metal concentrations in soils; and soil pH, salinity, and clay content in four selected floodplain meadows contaminated by these tailings. Trace metal levels frequently exceed acceptable concentrations for agricultural soils at sampling points within the meadows. pH levels within flood-deposited tailings are strongly to moderately acid, while pH levels outside of tailings deposits are neutral. The data analysis: (1) shows that metals and acidity associated with tailings affect plant biomass, density, and diversity; (2) documents that the vegetation/metal and vegetation/pH associations are more of a threshold than a linear relationship; and (3) suggests that other factors may be involved in structuring the community. Vegetation diversity, density, and biomass decrease at threshold levels of trace metal concentrations and soil pH in all four meadows. CuSum plots of diversity in relation to trace metal levels show a decrease in mean diversity at 315 ppm copper, 22 ppm arsenic, 4.2% iron, 65 ppm lead, and 170 ppm zinc. Densities of Phleum pratense and Poa pratensis were significantly lower (P {le} 0.001) on plots with more than 250 ppm copper. Above-ground biomass of Phleum pratense was also significantly lower on plots with copper levels above 250 ppm. Decreased mean grass density was found on plots with pH < 6.4, but the only statistically significant difference was for Juncus balticus, which had increased density on plots with pH < 6.4. In contrast to the clear impacts of trace metals and pH on vegetation, other site characteristics did not alter measured vegetation characteristics.

  2. Effect of width of repair welding on stress distribution of dissimilar metal butt weld of nuclear piping

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Won Shik; Lee, Hwee Seung; Huh, Nam Su [Seoul National Univ. of Science and Technology, Seoul (Korea, Republic of)

    2013-10-15

    In the present work, the welding residual stress due to repair welding and the stress redistribution behavior due to primary pressure are investigated via 2-dimensional non-linear finite element analyses. In particular, the effect of repair welding width on stress distribution is emphasized. Although, large tensile residual stresses are produced at the PWSCC sensitive region due to repair welding, these stresses are highly reduced due to stress redistribution caused by primary load. Based on the present finite element results, it has been revealed that the effect of width of repair welding on stress distribution is not significant. In the past few years, many numerical and experimental works have been made to assess a structural integrity of cracked components subjected to primary water stress corrosion cracking in dissimilar metal weld (DMW) using Alloys 82/182 in nuclear industries worldwide. These works include a prediction of weld residual stresses in dissimilar metal weld by either numerical or experimental works since an accurate estimation of residual stress distribution in dissimilar metal weld is the most important element for integrity assessment of components subjected to primary water stress corrosion cracking. During an actual welding process, in general, a repair welding is often performed when a defect indication is detected during post-welding inspection. It has been revealed that such a repair welding could lead to higher tensile residual stress in dissimilar metal weld, which is detrimental to the crack growth due to primary water stress corrosion cracking. Thus, the prediction of residual stress considering a repair welding is needed, and then many efforts were made on this issue. In the present work, the effect of width of repair welding on stress distribution of dissimilar metal butt weld of nuclear piping is evaluated based on the detailed 2-dimensional non-linear finite element analyses. For this purpose, the welding residual stress due to

  3. PLA2G6基因多态性与偏执型精神分裂症的关联%Association between PLA2G6 gene polymorphism and paranoid schizophrenia

    Institute of Scientific and Technical Information of China (English)

    陶然; 张小娟; 史杰萍; 于雅琴

    2007-01-01

    目的:探讨PLA2G6基因多态性与偏执型精神分裂症的关系.方法:采用聚合酶链反应(PCR)和限制性内切酶片段长度多态性(RFLP)方法,在109个偏执型精神分裂症患者核心家系中检测PLA2G6基因上的3个单核苷酸多态性(SNP)(rs2235346、rs2272831和rs2284060).运用单倍型相对风险(HRR)分析和传递不平衡分析(TDT)方法进行关联分析.结果:所检测的3个SNPs的基因型在患者组和父母组中频数分布均符合Hardy-Weinberg平衡.HRR和TDT分析均表明,rs2272831位点与偏执型精神分裂症相关联(χ2=5.590,υ=1,P=0.018;χ2=5.333,υ=1,P=0.021),而rs2235346和rs2284060位点与偏执型精神分裂症无关联.结论:PLA2G6基因可能是偏执型精神分裂症的易感基因.

  4. Detection of radioactive gases in the CO{sub 2} cooling the reactors G 2 - G 3; Detection des gaz radioactifs dans le CO{sub 2} de refroidissement des piles G2 - G3

    Energy Technology Data Exchange (ETDEWEB)

    Pouthier, J.; Rossi, J. [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1968-07-01

    The carbon dioxide cooling the reactors G2 - G3 contains activation gases and fission gases. It is of interest to know their concentration, for example to be able to deduce rapidly the norms which would have to be applied in the case of an incident in the circuit. Gas-phase chromatography is applied daily for carrying out analyses. The chromatogram has separate peaks due to tritium, argon 41, krypton 85 and the 133 and 135 isotopes of xenon. By integrating each peak it is possible to calculate the specific activity of each product. The construction of an apparatus for carrying out continuous measurements is under consideration. (authors) [French] Le gaz carbonique, refroidissant les reacteurs G2 - G3, contient des gaz d'activation et des gaz de fission. Il est interessant de connaitre leur teneur par exemple pour etre en mesure de deduire rapidement les normes qu'il y aurait lieu d'appliquer en cas d'incidents sur le circuit. La methode de chromatographie en phase gazeuse est employee quotidiennement pour faire des analyses. Le chromatogramme se presente sous forme de pics distincts dus au tritium, a l'argon 41, au krypton 85 et aux isotopes 133 et 135 du xenon. L'integration de chaque pic permet de calculer l'activite specifique de chaque compose. Il est envisage de construire un appareil pour des mesures en continu. (auteurs)

  5. Analysis on Feasibility of Shared Antenna and Feeders Between LTE-FDD System and 2G/3G System%LTE-FDD与2G/3G系统共天馈的可行性分析

    Institute of Scientific and Technical Information of China (English)

    崔雁松

    2015-01-01

    With the release of 4G licenses of LTE-FDD, the construction of network and base-stations come one after another. After the analysis of advantages and defects of setting up a new base-station, three alternative modes of co-location scenarios between LTE-FDD system and 2G/3G system are proposed, based on the spectrum occupancy of present networks of China Unicom and China Telecom. The analysis on feasibility of the three alternative modes provides the experience reference for 4G network construction of operators.%随着4G LTE-FDD牌照的正式发放,LTE-FDD的建网建站问题接踵而至.文章在对4G基站独立建设的利弊进行了简要分析之后,结合联通和电信两大运营商现网频谱占用情况,对4G LTE-FDD与2G/3G共天馈建设提出了3种备选方式,并分别进行了可行性分析,为运营商的4G网络建设提供了借鉴.

  6. Bedrock and surficial geologic map of the Satan Butte and Greasewood 7.5’ quadrangles, Navajo and Apache Counties, northern Arizona

    Science.gov (United States)

    Amoroso, Lee; Priest, Susan S.; Hiza-Redsteer, Margaret

    2013-01-01

    The geologic map of the Satan Butte and Greasewood 7.5’ quadrangles is the result of a cooperative effort of the U.S. Geological Survey (USGS) and the Navajo Nation to provide regional geologic information for management and planning officials. This map provides geologic information useful for range management, plant and animal studies, flood control, water resource investigations, and natural hazards associated with sand-dune mobility. The map provides connectivity to the regional geologic framework of the Grand Canyon area of northern Arizona. The map area encompasses approximately 314 km2 (123 mi2) within Navajo and Apache Counties of northern Arizona and is bounded by lat 35°37'30" to 35°30' N., long 109°45' to 110° W. The quadrangles lie within the southern Colorado Plateau geologic province and within the northeastern portion of the Hopi Buttes (Tsézhin Bií). Large ephemeral drainages, Pueblo Colorado Wash and Steamboat Wash, originate north of the map area on the Defiance Plateau and Balakai Mesa respectively. Elevations range from 1,930 m (6,330 ft) at the top of Satan Butte to about 1,787 m (5,860 ft) at Pueblo Colorado Wash where it exits the southwest corner of the Greasewood quadrangle. The only settlement within the map area is Greasewood, Arizona, on the north side of Pueblo Colorado Wash. Navajo Highway 15 crosses both quadrangles and joins State Highway 264 northwest of Ganado. Unimproved dirt roads provide access to remote parts of the Navajo Reservation.

  7. MMP1-1607(1G>2G polymorphism and the risk of lung cancer in Lebanon

    Directory of Open Access Journals (Sweden)

    Hana Fakhoury

    2012-01-01

    Full Text Available Context: Matrix metalloproteinases (MMPs are a family of enzymes that degrade various components of the extracellular matrix and are involved in the development and progression of cancer. Lung cancer is the most commonly diagnosed cancer in Lebanon. MMP1 is responsible for degrading stromal collagens, which enhance the ability of neoplastic cells to cross basal membrane of both the endothelium and the vascular endothelium. A recent meta-analysis has suggested that the MMP1-1607 2G allele may be associated with an increased risk for certain types of cancers. Aim: This study was undertaken to investigate the association between guanine insertion polymorphism in the MMP1 promoter and the susceptibility to lung cancer in the Lebanese population. Settings and Design: This case-control study was conducted on 41 patients with lung cancer and 51 age-matched healthy controls, recruited from different regions of Lebanon. Methods: Cases were histologically confirmed lung cancer patients obtained from different hospitals in Lebanon. Controls were healthy unrelated individuals with no history of cancer or genetic diseases. All subjects were genotyped for MMP1 -1607(1G>2G polymorphism using polymerase chain reaction-restriction fragment length polymorphism method (PCR-RFLP. Results: No statistically significant differences were found when genotype and allele distribution of MMP1 -1607(1G>2G polymorphism were compared between patients with lung cancer and controls [P= 0.6 by chi-squared test on a 3x2 contingency table; allelic P=0.61, OR (95% CI = 1.18 (0.60-2.31]. Conclusion: Our data shows that MMP1 promoter polymorphism is not associated with lung cancer susceptibility in the Lebanese population.

  8. Optimal A-Train Data Utilization: A Use Case of Aura OMI L2G and MERRA-2 Aerosol Products

    Science.gov (United States)

    Zeng, Jian; Shen, Suhung; Wei, Jennifer; Meyer, David J.

    2017-01-01

    Ozone Monitoring Instrument (OMI) aboard NASA's Aura mission measures ozone column and profile, aerosols, clouds, surface UV irradiance, and the trace gases including NO2, SO2, HCHO, BrO, and OClO using UltraViolet electromagnetic spectrum (280 - 400 nm) with a daily global coverage and a pixel spatial resolution of 13 km × 24 km at nadir, and it's been one of the key instruments to study the Earth's atmospheric composition and chemistry. The second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) is NASA's atmospheric reanalysis using an upgraded version of Goddard Earth Observing System Model, version 5 (GEOS-5) data assimilation system. Compared to its predecessor MERRA, MERRA-2 is enhanced with more aspects of the Earth system among which is aerosol assimilation. When comparing between satellite pixel measurements and modeled grid data, how to properly handle counterpart pairing is critical considering their spatial and temporal variations. The comparison between satellite and model data by simply using Level 3 (L3) products may result biases due to lack of detailed temporal information. It has been preferred to inter-compare or implement satellite derived physical quantity (i.e., Level 2 (L2) Swath type) directly with/to model measurements with higher temporal and spatial resolution as possible. However, this has posed a challenge in the community to handle. Rather than directly handling the L2 or L3 data, there is a Level 2G (L2G) product conserving L2 pixel scientific data quality but in Grid type with the global coverage. In this presentation, we would like to demonstrate the optimal utilization of OMI L2G daily aerosol products by comparing with MERRA-2 hourly aerosol simulations matched well in both space and time.

  9. Quantification of Bone Growth Rate Variability in Rats Exposed to Micro- (near zero G) and Macrogravity (2G)

    Science.gov (United States)

    Bromage, Timothy G.; Doty, Stephen B.; Smolyar, Igor; Holton, Emily

    1996-01-01

    Our stated primary objective is to quantify the growth rate variability of rat lamellar bone exposed to micro and macrogravity (2G). The primary significance of the proposed work is that an elegant method will be established that unequivocally characterizes the morphological consequences of gravitational factors on developing bone. The integrity of this objective depends upon our successful preparation of thin sections suitable for imaging individual bone lamellae, and our imaging and quantitation of growth rate variability in populations of lamellae from individual bone samples.

  10. Quantitation of Bone Growth Rate Variability in Rats Exposed to Micro-(near zero G) and Macrogravity (2G)

    Science.gov (United States)

    Bromage, Timothy G.; Doty, Stephen B.; Smolyar, Igor; Holton, Emily

    1997-01-01

    Our stated primary objective is to quantify the growth rate variability of rat lamellar bone exposed to micro- (near zero G: e.g., Cosmos 1887 & 2044; SLS-1 & SLS-2) and macrogravity (2G). The primary significance of the proposed work is that an elegant method will be established that unequivocally characterizes the morphological consequences of gravitational factors on developing bone. The integrity of this objective depends upon our successful preparation of thin sections suitable for imaging individual bone lamellae, and our imaging and quantitation of growth rate variability in populations of lamellae from individual bone samples.

  11. Deploying IPv6 in 3GPP networks evolving mobile broadband from 2G to LTE and beyond

    CERN Document Server

    Korhonen, Jouni; Soininen, Jonne

    2013-01-01

    Deploying IPv6 in 3GPP Networks - Evolving Mobile Broadband from 2G to LTE and Beyond  A practical guide enabling mobile operators to deploy IPv6 with confidence The most widely used cellular mobile broadband network technology is based on the 3GPP standards. The history and background of the 3GPP technology is in the Global Mobile Service (GSM) technology and the work done in European Telecommunications Standards Institute (ETSI). This primary voice service network has evolved to be the dominant mobile Internet access technology. Deploying IPv6 in

  12. Standards for EV charging and their usability for providing V2G services in the primary reserve market

    DEFF Research Database (Denmark)

    Martinenas, Sergejus; Vandael, Stijn; Andersen, Peter Bach

    2016-01-01

    Transition to sustainable energy and transport is inevitable, which brings new challenges for the existing power grid. Meanwhile, electric vehicles (EVs) are becoming more widespread and their potential for grid support services is becoming more evident. However, such intelligent integration of E...... into a smart grid is highly dependent on infrastructure and communication. This work overviews and analyses the current state of available standards in the field of eMobility. It particularly focuses on their usability for enabling V2G services such as primary frequency regulation....

  13. Dissolved inorganic carbon and stable carbon isotopic evolution of neutral mine drainage interacting with atmospheric CO{sub 2(g)}

    Energy Technology Data Exchange (ETDEWEB)

    Abongwa, Pride Tamasang, E-mail: abongwa@okstate.edu; Atekwana, Eliot Anong; Puckette, James

    2016-03-01

    We investigated the spatial variations in the concentrations of dissolved inorganic carbon (DIC), the stable carbon isotopic composition (δ{sup 13}C) of DIC and the δ{sup 13}C of carbonate precipitated from neutral mine drainage interacting with the atmospheric CO{sub 2(g)}. We assessed the chemical, DIC and δ{sup 13}C{sub DIC} evolution of the mine drainage and the δ{sup 13}C evolution of carbonate precipitates for a distance of 562 m from the end of an 8 km tunnel that drains a mine. Our results show that as the mine drainage interacts with atmospheric CO{sub 2(g)} the outgassing of CO{sub 2} due to the high initial partial pressure of CO{sub 2} (pCO{sub 2}) causes the DIC to evolve under kinetic conditions followed by equilibration and then under equilibrium conditions. The carbonate evolution was characterized by spatial increases in pH, decreasing concentrations of Ca{sup 2+} and DIC and by the precipitation of carbonate. The δ{sup 13}C{sub DIC} showed a larger enrichment from the tunnel exit to 38 m, moderate continuous enrichment to 318 m and almost no enrichment to 562 m. On the other hand, the δ{sup 13}C of the carbonate precipitates also showed large enrichment from the tunnel exit to 38 m, moderate enrichment to 318 m after which the δ{sup 13}C remained nearly constant. The enrichment in the δ{sup 13}C of the DIC and the carbonate precipitates from 0 to 38 m from kinetic fractionation caused by CO{sub 2(g)} outgassing was followed by a mix of kinetic fractionation and equilibrium fractionation controlled by carbon exchange between DIC and atmospheric CO{sub 2(g)} to 318 m and then by equilibrium fractionation from 318 to 562 m. From the carbonate evolution in this neutral mine drainage, we estimated that 20% of the carbon was lost via CO{sub 2} outgassing, 12% was sequestered in sediments in the drainage ponds from calcite precipitation and the remainder 68% was exported to the local stream. - Highlights: • We assess the δ{sup 13}C in a

  14. High-quality MOVPE butt-joint integration of InP/AlGaInAs/InGaAsP-based all-active optical components

    DEFF Research Database (Denmark)

    Kulkova, Irina; Kadkhodazadeh, Shima; Kuznetsova, Nadezda

    2014-01-01

    In this paper, we demonstrate the applicability of MOVPE butt-joint regrowth for integration of all-active InP/AlGaAs/InGaAsP optical components and the realization of high-functionality compact photonic devices. Planar high-quality integration of semiconductor optical amplifiers of various epi......-structures with a multi-quantum well electro-absorption modulator has been successfully performed and their optical and crystalline quality was experimentally investigated. The regrown multi-quantum well material exhibits a slight bandgap blue-shift of less than 20 meV, when moving away from the regrowth interface...

  15. Subterranean fragmentation of magma during conduit initiation and evolution in the shallow plumbing system of the small-volume Jagged Rocks volcanoes (Hopi Buttes Volcanic Field, Arizona, USA)

    Science.gov (United States)

    Re, Giuseppe; White, James D. L.; Muirhead, James D.; Ort, Michael H.

    2016-08-01

    Monogenetic volcanoes have limited magma supply and lack long-lived sustained magma plumbing systems. They erupt once, often from multiple vents and sometimes over several years, and are rarely or never re-activated. Eruptive behavior is very sensitive to physical processes (e.g., volatile exsolution, magma-water interaction) occurring in the later stages of magma ascent at shallow crustal depths (flowing through dikes fragmented and conduits were formed. We have identified three main types of fragmental deposits, (1) buds (which emerge from dikes), (2) pyroclastic massifs, and (3) diatremes; these represent three different styles and intensities of shallow-depth magma fragmentation. They may develop successively and at different sites during the evolution of a monogenetic volcano. The deposits consist of a mixture of pyroclasts with varying degrees of welding and country-rock debris in various proportions. Pyroclasts are commonly welded together, but also reveal in places features consistent with phreatomagmatism, such as blocky shapes, dense groundmasses, and composite clasts (loaded and cored). The extent of fragmentation and the formation of subterranean open space controlled the nature of the particles and the architecture and geometry of these conduit structures and their deposits.

  16. The functional c.-2G>C variant of the mineralocorticoid receptor modulates blood pressure, renin, and aldosterone levels.

    Science.gov (United States)

    van Leeuwen, Nienke; Caprio, Massimiliano; Blaya, Carolina; Fumeron, Frédéric; Sartorato, Paola; Ronconi, Vanessa; Giacchetti, Gilberta; Mantero, Franco; Fernandes-Rosa, Fabio L; Simian, Christophe; Peyrard, Sévrine; Zitman, Frans G; Penninx, Brenda W J H; de Kloet, E Ron; Azizi, Michel; Jeunemaitre, Xavier; Derijk, Roel H; Zennaro, Maria-Christina

    2010-11-01

    The mineralocorticoid receptor (MR) is essential in the regulation of volemia and blood pressure. Rare mutations in the MR gene cause type 1 pseudohypoaldosteronism and hypertension. In this study we characterized the common MR polymorphism c.-2G>C (rs2070951) in vitro and tested its influence on parameters related to blood pressure regulation and the renin-angiotensin system. In vitro studies showed that the G allele was associated with decreased MR protein levels and reduced transcriptional activation compared with the C allele. Association studies were performed with several outcome variables in 3 independent cohorts: a mild hypertensive group subjected to a salt-sensitivity test, a healthy normotensive group included in a crossover study to receive both a high and low Na/K diet, and a large cohort (The Netherlands Study of Depression and Anxiety), in which blood pressure was measured. Subjects with the GG genotype had significantly higher plasma renin levels both in the mild hypertensive group and in normal volunteers compared with homozygous C carriers. The GG genotype was also correlated with higher plasma aldosterone levels in healthy subjects. In both the mild hypertensive group and The Netherlands Study of Depression and Anxiety cohort the genotype GG was associated with higher systolic blood pressure in males. In conclusion, the G allele of the common functional genetic polymorphism c.-2G>C in the MR gene associates with increased activation of the renin-angiotensin-aldosterone axis and with increased blood pressure, probably related to decreased MR expression.

  17. [Results of a post-marketing surveillance of meropenem administered over 2 g/day for serious infectious diseases].

    Science.gov (United States)

    Wakisaka, Koji; Tani, Shunsuke; Ishibashi, Kazuo; Nukui, Kazuhiko; Nagao, Munehiko

    2015-10-01

    The post-marketing surveillance of meropenem (Meropen®) administered over 2g/day for serious infectious diseases was conducted between August 2011 and June 2013 to evaluate safety and efficacy under actual clinical use. There were 382 and 322 evaluable cases for safety and efficacy respectively, of 399 case cards collected from 87 institutions. In safety analysis, the incidence of adverse drug reactions (ADRs) associated with use of meropenem (including abnormal laboratory findings) was 19.1% (73/382 cases), and the main ADRs were hepatic function abnormal, aspartate aminotransferase increased, alanine aminotransferase increased, liver disorder, and diarrhoea, which were similar to these observed in the post-marketing surveillances of meropenem conducted before. In efficacy analysis, the efficacy was 73.6% (237/322 cases), which is as same as 71.4% (3214/4504 cases) of post-marketing surveillance of meropenem conducted after first approval under 2 g/day for infectious diseases. These results confirmed meropenem (Meropen®) is one of the useful antimicrobial agents for serious infectious diseases.

  18. A Differentially Driven Dual-Polarized Dual-Wideband Complementary Antenna for 2G/3G/LTE Applications

    Directory of Open Access Journals (Sweden)

    Botao Feng

    2014-01-01

    Full Text Available A novel differentially driven dual-polarized dual-wideband complementary patch antenna with high isolation is proposed for 2G/3G/LTE applications. In order to generate dual-polarization and dual-wideband properties, a pair of biorthogonal dual-layer η-shaped tapered line feeding structures is utilized to feed two pairs of dual-layer U-shaped patches, respectively. The upper-layer U-shaped patches mainly serve the upper frequency band, while the lower-layer ones chiefly work for the lower frequency band. Besides, a horned reflector is introduced to improve radiation patterns and provide stable gain. The prototype antenna can achieve a bandwidth of 25.7% (0.78 GHz–1.01 GHz with a stable gain of 7.8±0.7 dBi for the lower band, and a bandwidth of 45.7% (1.69 GHz–2.69 GHz with a gain of 9.5±1.1 dBi for the upper band. Input isolation exceeding 30 dB has been obtained in the wide bandwidth. Thus, it can be potentially used as a base station antenna for 2G/3G/LTE networks.

  19. Basic fibroblast growth factor is pro-adipogenic in rat skeletal muscle progenitor clone, 2G11 cells.

    Science.gov (United States)

    Nakano, Shin-ichi; Nakamura, Katsuyuki; Teramoto, Naomi; Yamanouchi, Keitaro; Nishihara, Masugi

    2016-01-01

    Intramuscular adipose tissue (IMAT) formation is a hallmark of marbling in cattle. IMAT is considered to originate from skeletal muscle progenitor cells with adipogenic potential. However, the mechanism involved in IMAT formation from these progenitor cells in vivo remains unclear. In the present study, among the growth factors tested, which were known to be expressed in skeletal muscle, we found only basic fibroblast growth factor (bFGF) has a pro-adipogenic effect on skeletal muscle derived adipogenic progenitor clone, 2G11 cells. Pre-exposure of 2G11 cells to bFGF did not affect initial gene expressions of CCAAT/enhancer-binding protein (C/EBP)β and C/EBPδ, while resulting in an enhancement of subsequent expressions of C/EBPα and proliferator-activated receptor gamma (PPARγ) during adipogenesis, indicating that bFGF is acting on the transcriptional regulation of C/EBPα and PPARγ. In addition, the effect of bFGF is mediated via two types of FGF receptor (FGFR) isoforms: FGFR1 and FGFR2 IIIc, and both receptors are prerequisite for bFGF to express its pro-adipogenic effect. These results suggest that bFGF plays an important role as a key trigger of IMAT formation in vivo.

  20. Contribution of N-linked glycans on HSV-2 gB to cell–cell fusion and viral entry

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Sukun [State Key Laboratory of Virology, Wuhan Institute of Virology, Chinese Academy of Sciences, Wuhan 430071 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Hu, Kai [State Key Laboratory of Virology, Wuhan Institute of Virology, Chinese Academy of Sciences, Wuhan 430071 (China); He, Siyi; Wang, Ping; Zhang, Mudan; Huang, Xin [State Key Laboratory of Virology, Wuhan Institute of Virology, Chinese Academy of Sciences, Wuhan 430071 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Du, Tao [State Key Laboratory of Virology, Wuhan Institute of Virology, Chinese Academy of Sciences, Wuhan 430071 (China); Zheng, Chunfu [Soochow University, Institutes of Biology and Medical Sciences, Suzhou 215123 (China); Liu, Yalan [State Key Laboratory of Virology, Wuhan Institute of Virology, Chinese Academy of Sciences, Wuhan 430071 (China); Hu, Qinxue, E-mail: qhu@wh.iov.cn [State Key Laboratory of Virology, Wuhan Institute of Virology, Chinese Academy of Sciences, Wuhan 430071 (China); Institute for Infection and Immunity, St George' s University of London, London SW17 0RE (United Kingdom)

    2015-09-15

    HSV-2 is the major cause of genital herpes and its infection increases the risk of HIV-1 acquisition and transmission. HSV-2 glycoprotein B together with glycoproteins D, H and L are indispensable for viral entry, of which gB, as a class III fusogen, plays an essential role. HSV-2 gB has seven potential N-linked glycosylation (N-CHO) sites, but their significance has yet to be determined. For the first time, we systematically analyzed the contributions of N-linked glycans on gB to cell–cell fusion and viral entry. Our results demonstrated that, of the seven potential N-CHO sites on gB, mutation at N390, N483 or N668 decreased cell–cell fusion and viral entry, while mutation at N133 mainly affected protein expression and the production of infectious virus particles by blocking the transport of gB from the endoplasmic reticulum to Golgi. Our findings highlight the significance of N-linked glycans on HSV-2 gB expression and function. - Highlights: • N-linked glycan at N133 is important for gB intracellular trafficking and maturation. • N-linked glycans at N390, N483 and N668 on gB are necessary for optimal cell–cell fusion. • N-linked glycans at N390, N483 and N668 on gB are necessary for optimal viral entry.

  1. Effects of V2G Reactive Power Compensation on the Component Selection in an EV or PHEV Bidirectional Charger

    Energy Technology Data Exchange (ETDEWEB)

    Kisacikoglu, Mithat C [ORNL; Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL

    2010-01-01

    Electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) are becoming a part of the electric grid day by day. Chargers for these vehicles have the ability to make this interaction better for the consumer and for the grid. Vehicle to grid (V2G) power transfer has been under research for more than a decade because of the large energy reserve of an electric vehicle battery and the potential of thousands of these connected to the grid. Rather than discharging the vehicle batteries, reactive power compensation in particular is beneficial for both consumers and for the utility. However, certain adverse effects or requirements of reactive power transfer should be defined before a design stage. To understand the dynamics of this operation, this study investigates the effect of reactive power transfer on the charger system components, especially on the dc-link capacitor and the battery.

  2. THE CURRENT STAGE OF THE DEVELOPMENT OF G2B AND B2G ELECTRONIC SERVICES IN ROMANIA

    Directory of Open Access Journals (Sweden)

    ALIN ISAC

    2010-01-01

    Full Text Available The paper begins with an introduction defining the characteristics ofG2B and B2G services, and it continues with the analysis of their stage of development inRomania. Thus, as far as G2B services are concerned we have examined them starting from thegeneral approach in order to determine the degree of development and the use of online publicservices and from the specific approach in order to examine the quality of this type of services.The quintessence of these types of services is the National Electronic System, for which thesecond part of the paper presents, in detail, the main modules of this system allowing: routingmessages, integrating information systems of government agencies, user management.

  3. Synthesis of G-N2-(CH2)3-N2-G Trimethylene DNA interstrand cross-links

    Science.gov (United States)

    Gruppi, Francesca; Salyard, Tracy L. Johnson; Rizzo, Carmelo J.

    2014-01-01

    The synthesis of G-N2-(CH2)3-N2-G trimethylene DNA interstrand cross-links (ICLs) in a 5′-CG-3′ and 5′-GC-3′ sequence from oligodeoxynucleotides containing N2-(3-aminopropyl)-2′-deoxyguanosine and 2-fluoro-O6-(trimethylsilylethyl)inosine is presented. Automated solid-phase DNA synthesis was used for unmodified bases and modified nucleotides were incorporated via their corresponding phosphoramidite reagent by a manual coupling protocol. The preparation of the phosphoramidite reagents for incorporation of N2-(3-aminopropyl)-2′-deoxyguanosine is reported. The high-purity trimethylene DNA interstrand cross-link product is obtained through a nucleophilic aromatic substitution reaction between the N2-(3-aminopropyl)-2′-deoxyguanosine and 2-fluoro-O6-(trimethylsilylethyl)inosine containing oligodeoxynucleotides. PMID:25431636

  4. Dopaminergic neurons differentiating from LRRK2 G2019S induced pluripotent stem cells show early neuritic branching defects.

    Science.gov (United States)

    Borgs, Laurence; Peyre, Elise; Alix, Philippe; Hanon, Kevin; Grobarczyk, Benjamin; Godin, Juliette D; Purnelle, Audrey; Krusy, Nathalie; Maquet, Pierre; Lefebvre, Philippe; Seutin, Vincent; Malgrange, Brigitte; Nguyen, Laurent

    2016-09-19

    Some mutations of the LRRK2 gene underlie autosomal dominant form of Parkinson's disease (PD). The G2019S is a common mutation that accounts for about 2% of PD cases. To understand the pathophysiology of this mutation and its possible developmental implications, we developed an in vitro assay to model PD with human induced pluripotent stem cells (hiPSCs) reprogrammed from skin fibroblasts of PD patients suffering from the LRKK2 G2019S mutation. We differentiated the hiPSCs into neural stem cells (NSCs) and further into dopaminergic neurons. Here we show that NSCs bearing the mutation tend to differentiate less efficiently into dopaminergic neurons and that the latter exhibit significant branching defects as compared to their controls.

  5. The Development of a B2G Online Authentication Standard: a design perspective of the policy consultation process

    Directory of Open Access Journals (Sweden)

    John Campbell

    2007-09-01

    Full Text Available The primary focus in design science research is the development of innovative and useful system artifacts. Apart from IT-centric artifacts such as software and hardware, design research outputs can also include constructs, models, methods and better theories. However, there is very little published research concerned with these alternative artifact genres. The research reported in this paper focuses on one of these alternative design outputs that are of particular interest to information systems; the development of innovative technology standards. In this paper it is argued that much can be learnt from using a design science approach to analyze these types of information systems artifacts. A design science theory of punctuated action is presented and used to briefly explore the public consultation process in the development of a B2G online authentication standard for the Australian Federal Government.

  6. Effect of family structure and TPH2 G-703T on the stability of dysregulation profile throughout adolescence.

    Science.gov (United States)

    Nobile, Maria; Bianchi, Valentina; Monzani, Dario; Beri, Silvana; Bellina, Monica; Greco, Andrea; Colombo, Paola; Tesei, Alessandra; Caldirola, Daniela; Giorda, Roberto; Perna, Giampaolo; Molteni, Massimo

    2016-01-15

    Two different polymorphisms (TPH2 G-703T and 5-HTTLPR) involved in the serotonergic pathway have been reported to play a role, both alone and in interaction with the environment, in early and adult emotion regulation. As most of these studies are cross-sectional, we know little about the impact of these polymorphisms over time, particularly during adolescence. Because we were interested in the effects of these polymorphisms and environment (i.e., family structure) at different time-points on the emotional dysregulation profile, we performed a path analysis model in a general adolescent population sample of a five-year follow-up study. We found a high stability of Dysregulation Profile problems independently from the examined allelic variants. We also found that early family structure directly influences the levels of dysregulation problems in early adolescence, both alone and in interaction with TPH2, suggesting the presence of a gene-environment interaction effect. Furthermore, we found that in adolescents homozygous for the TPH2 G allele, the effect of the early family structure remains active during late adolescence, albeit mediated by earlier emotional problems. The high attrition rate, the use of only one source on behavioral problems of adolescents, and the focus on a single polymorphism in the investigated genes could limit the generalizability of the present results. These results suggest that early family structure could play a significant role in the development and maintenance of emotional and behavioral problems not only in early adolescence but also in late-adolescence, although this effect was mediated and moderated by behavioral and genetic variables. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. DECISION TREE CONSTRUCTION AND COST-EFFECTIVENESS ANALYSIS OF TREATMENT OF ULCERATIVE COLITIS WITH PENTASA® MESALAZINE 2 G SACHET

    Directory of Open Access Journals (Sweden)

    Alvaro Mitsunori NISHIKAWA

    2013-12-01

    Full Text Available Context Unspecified Ulcerative Rectocolitis is a chronic disease that affects between 0.5 and 24.5/105 inhabitants in the world. National and international clinical guidelines recommend the use of aminosalicylates (including mesalazine as first-line therapy for induction of remission of unspecified ulcerative rectocolitis, and recommend the maintenance of these agents after remission is achieved. However, multiple daily doses required for the maintenance of disease remission compromise compliance with treatment, which is very low (between 45% and 65%. Use of mesalazina in granules (2 g sachet once daily - Pentasa® sachets 2 g - can enhance treatment adherence, reflecting in an improvement in patients' outcomes. Objective To evaluate the evidence on the use of mesalazine for the maintenance of remission in patients with unspecified ulcerative rectocolitis and its effectiveness when taken once versus more than once a day. From an economic standpoint, to analyze the impact of the adoption of this dosage in Brazil's public health system, considering patients' adherence to treatment. Methods A decision tree was developed based on the Clinical Protocol and Therapeutic Guidelines for Ulcerative Colitis, published by the Ministry of Health in the lobby SAS/MS n° 861 of November 4 th, 2002 and on the algorithms published by the Associação Brasileira de Colite Ulcerativa e Doença de Crohn, aiming to get the cost-effectiveness of mesalazine once daily in granules compared with mesalazine twice daily in tablets. Results The use of mesalazine increases the chances of remission induction and maintenance when compared to placebo, and higher doses are associated with greater chance of success without increasing the risk of adverse events. Conclusion The use of a single daily dose in the maintenance of remission is effective and related to higher patient compliance when compared to the multiple daily dose regimens, with lower costs.

  8. No More Butts

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Lighting up in indoor places of work will soon be a thing of the past in Beijing.According to a renewed local regulation in the Chinese capi- tal,from this May,smoking will be banned in hotels,offices,holiday resorts and all indoor areas of medical facilities,in addition to previously restricted schools,sports arenas and movie theaters.All restaurants,bars and Internet cafes are also ordered to designate smoke-free areas.The measure,the most extensive overall indoor smoking ban in the country,is expected to bring to the city a nicer and healthier environment.

  9. H-2g, a glucose analog of blood group H antigen, mediates monocyte recruitment in vitro and in vivo via IL-8/CXCL8

    Directory of Open Access Journals (Sweden)

    Rabquer BJ

    2012-09-01

    Full Text Available Bradley J Rabquer,1,2 Yong Hou,1 Jeffrey H Ruth,1 Wei Luo,1 Daniel T Eitzman,1 Alisa E Koch,3,1 Mohammad A Amin11University of Michigan Medical School, Department of Internal Medicine, Ann Arbor, MI, USA; 2Albion College, Biology Department, Albion, MI, USA; 3VA Medical Service, Department of Veterans Affairs, Ann Arbor, MI, USAObjective: Monocyte (MN recruitment is an essential inflammatory component of many autoimmune diseases, including rheumatoid arthritis (RA. In this study we investigated the ability of 2-fucosyllactose (H-2g, a glucose analog of blood group H antigen to induce MN migration in vivo and determined if H-2g-induced interleukin-8 (IL-8/CXCL8 plays a role in MN ingress in RA.Methods: Sponge granuloma and intravital microscopy assays were performed to examine H-2g-induced in vivo MN migration and rolling, respectively. MNs were stimulated with H-2g, and the production of IL-8/CXCL8 was assessed by enzyme-linked immunosorbent assay and quantitative polymerase chain reaction. Lastly, in vitro MN migration assays and an in vivo RA synovial tissue severe combined immunodeficiency mouse model were used to determine the role of IL-8/CXCL8 in H-2g-induced MN migration.Results: In vivo, H-2g induced significantly greater MN migration compared to phosphate buffered saline. Intravital microscopy revealed that H-2g mediates MN migration in vivo by inducing MN rolling. In addition, H-2g induced MN production of IL-8/CXCL8, a process that was dependent on Src kinase. Moreover, we found that H-2g mediated MN migration in vitro, and in vivo migration was inhibited by a neutralizing anti-IL-8/CXCL8 antibody.Conclusion: These findings suggest that H-2g mediates MN recruitment in vitro and in vivo (in part via IL-8/CXCL8.Keywords: inflammation, rheumatoid arthritis, chemokine, migration

  10. Renormalized Volume

    Science.gov (United States)

    Gover, A. Rod; Waldron, Andrew

    2017-09-01

    We develop a universal distributional calculus for regulated volumes of metrics that are suitably singular along hypersurfaces. When the hypersurface is a conformal infinity we give simple integrated distribution expressions for the divergences and anomaly of the regulated volume functional valid for any choice of regulator. For closed hypersurfaces or conformally compact geometries, methods from a previously developed boundary calculus for conformally compact manifolds can be applied to give explicit holographic formulæ for the divergences and anomaly expressed as hypersurface integrals over local quantities (the method also extends to non-closed hypersurfaces). The resulting anomaly does not depend on any particular choice of regulator, while the regulator dependence of the divergences is precisely captured by these formulæ. Conformal hypersurface invariants can be studied by demanding that the singular metric obey, smoothly and formally to a suitable order, a Yamabe type problem with boundary data along the conformal infinity. We prove that the volume anomaly for these singular Yamabe solutions is a conformally invariant integral of a local Q-curvature that generalizes the Branson Q-curvature by including data of the embedding. In each dimension this canonically defines a higher dimensional generalization of the Willmore energy/rigid string action. Recently, Graham proved that the first variation of the volume anomaly recovers the density obstructing smooth solutions to this singular Yamabe problem; we give a new proof of this result employing our boundary calculus. Physical applications of our results include studies of quantum corrections to entanglement entropies.

  11. NX-2G : autonomous BBOBS-NX for a highly mobile broadband seismic observation at the seafloor

    Science.gov (United States)

    Shiobara, Hajime; Sugioka, Hiroko; Ito, Aki; Shinohara, Masanao

    2016-04-01

    We had developed the broadband ocean bottom seismometer (BBOBS) and its new generation system (BBOBS-NX), and, with them, several practical observations have been performed to create and establish a new category of the ocean floor broadband seismology, since 1999. Now, our BBOBS and BBOBS-NX data is proved to be at acceptable level for broadband seismic analyses. Especially, the BBOBS-NX is able to obtain the low noise horizontal data comparable to the land station in periods longer than 10 s, which is adequate for modern analyses of the mantle structure. Moreover, the BBOBS(T)-NX is under practical evaluation for the mobile tilt observation at the seafloor, which will enable dense geodetic monitoring. The BBOBS-NX system must be a powerful tool, although, the current system has intrinsic limitation in opportunity of observations due to the necessary use of the submersible vehicle for the deployment and recovery. If we can use this system with almost any kind of vessels, like as the BBOBS (self pop-up system), it should lead us a true breakthrough of seafloor observations in geodynamics. Hereafter, we call the new autonomous BBOBS-NX as NX-2G in short. There are two main problems to be cleared to realize the NX-2G system. The first one is a tilt of the sensor unit on landing, which is larger than the acceptable limit of the sensor (±8°) in 47 % after our 15 free-fall deployments of the BBOBS-NX. As we had no evidence at which moment the tilt occurred, so it was observed during the BBOBS-NX deployment in the last year by attaching a video camera and an acceleration logger those were originally developed for this purpose. The only one result shows that the tilt on landing seemed determined by the final posture of the BBOBS-NX system just before the penetration into the sediment. The second problem is a required force to extract the sensor unit from the sticky clay sediment, which was about 80 kgf in maximum with the current BBOBS-NX system from in-situ measurements

  12. The LRRK2 G2019S mutation in Ashkenazi Jews with Parkinson disease: is there a gender effect?

    Science.gov (United States)

    Orr-Urtreger, A; Shifrin, C; Rozovski, U; Rosner, S; Bercovich, D; Gurevich, T; Yagev-More, H; Bar-Shira, A; Giladi, N

    2007-10-16

    Mutations in the leucine-rich repeat kinase 2 (LRRK2) gene are the most common genetic determinant of Parkinson disease (PD) identified to date, and have been implicated in both familial and sporadic forms of the disease. The G2019S change in LRRK2 exon 41 has been associated with disease at varying frequencies in Asian, European, North American, and North African populations, and is particularly prevalent among Ashkenazi Jews. We assessed the occurrence of the LRRK2 G2019S, I2012T, I2020T, and R1441G/C/H mutations in our cohort of Jewish Israeli patients with PD, and determined the LRRK2 haplotypes in 76 G2019S-carriers detected and in 50 noncarrier Ashkenazi patients, using six microsatellite markers that span the entire gene. Only the G2019S mutation was identified among our patients with PD, 14.8% in the Ashkenazi and 2.7% in the non-Ashkenazi patients, and in 26% and 10.6% of the Ashkenazi familial and apparently sporadic cases. The carrier frequencies in the Ashkenazi and non-Ashkenazi control samples were 2.4% and 0.4%. A common shared haplotype was detected in all non-Ashkenazi and half-Ashkenazi carriers and in all full-Ashkenazi carriers tested, except two. Women and patients with a positive family history of PD were significantly over-represented among the G2019S mutation carriers. Age at disease onset was similar in carriers and noncarriers. Our data suggest that the LRRK2 G2019S mutation plays an important role in the causality of familial and sporadic Parkinson disease (PD) in Israel and that gender affects its frequency among patients. Although testing symptomatic patients may help establish the diagnosis of PD, the value of screening asymptomatic individuals remains questionable until the penetrance and age-dependent risk of this mutation are more accurately assessed, and specific disease prevention or modifying interventions become available.

  13. Efficacy and safety of 2 g/day of strontium ranelate in Asian women with postmenopausal osteoporosis.

    Science.gov (United States)

    Liu, Jian-Min; Wai-Chee Kung, Annie; Pheng, Chan Siew; Zhu, Han-Min; Zhang, Zhen-Lin; Wu, Yi-Yong; Xu, Ling; Meng, Xun-Wu; Huang, Min-Li; Chung, Leung Ping; Hussain, Nik Hazlina Nik; Sufian, Seri Suniza; Chen, Jia-Lun

    2009-09-01

    Strontium ranelate is a new effective anti-osteoporotic treatment having a unique mode of action, reducing bone resorption while promoting continued bone formation, with a broad range of anti-fracture efficacy at vertebral as well as peripheral sites. In Phase III studies, it has proven its early and sustained efficacy against vertebral fractures in Caucasians along with a significant increase in lumbar bone mineral density (BMD). The aim of this randomized double-blind study was to demonstrate the efficacy of strontium ranelate (2 g/day) on lumbar spine bone mineral density and the clinical and biological safety in Asian postmenopausal osteoporotic patients compared to placebo over 1 year. Three hundred and twenty-nine eligible women from mainland China, Hong Kong and Malaysia were randomized into the study. The baseline characteristics were similar in the treatment and placebo groups: mean age of 66.2+/-6.5 years, time since menopause 17.6+/-7.2 years. In the Full Analysis Set (FAS, N=302), the mean baseline lumbar L2-L4 BMD was 0.715+/-0.106 g/cm(2) in the strontium ranelate group and 0.708 +/- 0.109 g/cm2 in the placebo group. The mean baseline femoral neck BMD was 0.575+/-0.074 g/cm2 and 0.566+/-0.069 g/cm2 respectively and mean total hip BMD was 0.642+/-0.080 g/cm2 and 0.631 +/-0.088 g/cm2 respectively. The overall compliance was 91.4% in the study drug group, and 97.4% in the placebo group. After 1 year of treatment, the lumbar spine, femoral neck and total hip BMD in the treated group was significantly increased by 3-5% as compared to placebo. Strontium ranelate was well tolerated. The most frequently reported emergent adverse events were comparable in both groups (60.4% versus 60.0%), with majority of them being mild gastrointestinal disorders. There were no clinically relevant changes in laboratory tests, such as blood routine, hepatic and renal function. It is thus concluded that the effects of 2 g/day strontium ranelate on BMD and its safety profile in

  14. Elevated PLA2G7 gene promoter methylation as a gender-specific marker of aging increases the risk of coronary heart disease in females.

    Directory of Open Access Journals (Sweden)

    Danjie Jiang

    Full Text Available PLA2G7 gene product is a secreted enzyme whose activity is associated with coronary heart disease (CHD. The goal of our study is to investigate the contribution of PLA2G7 promoter DNA methylation to the risk of CHD. Using the bisulphite pyrosequencing technology, PLA2G7 methylation was measured among 36 CHD cases and 36 well-matched controls. Our results indicated that there was a significant association between PLA2G7 methylation and CHD (adjusted P = 0.025. Significant gender-specific correlation was observed between age and PLA2G7 methylation (males: adjusted r = -0.365, adjusted P = 0.037; females: adjusted r = 0.373, adjusted P = 0.035. A breakdown analysis by gender showed that PLA2G7 methylation was significantly associated with CHD in females (adjusted P = 0.003 but not in males. A further two-way ANOVA analysis showed there was a significant interaction between gender and status of CHD for PLA2G7 methylation (gender*CHD: P = 6.04E-7. Moreover, PLA2G7 methylation is associated with the levels of total cholesterols (TC, r = 0.462, P = 0.009, triglyceride (TG, r = 0.414, P = 0.02 and Apolipoprotein B (ApoB, r = 0.396, P = 0.028 in females but not in males (adjusted P>0.4. Receiver operating characteristic (ROC curves showed that PLA2G7 methylation could predict the risk of CHD in females (area under curve (AUC = 0.912, P = 2.40E-5. Our results suggest that PLA2G7 methylation changes with aging in a gender-specific pattern. The correlation between PLA2G7 methylation and CHD risk in females is independent of other parameters including age, smoking, diabetes and hypertension. PLA2G7 methylation might exert its effects on the risk of CHD by regulating the levels of TC, TG, and ApoB in females. The gender disparities in the PLA2G7 methylation may play a role in the molecular mechanisms underlying the pathophysiology of CHD.

  15. The spectrum of low molecular weight alpha-amylase/protease inhibitor genes expressed in the US bread wheat cultivar Butte 86

    Directory of Open Access Journals (Sweden)

    Vensel William H

    2011-07-01

    Full Text Available Abstract Background Wheat grains accumulate a variety of low molecular weight proteins that are inhibitors of alpha-amylases and proteases and play an important protective role in the grain. These proteins have more balanced amino acid compositions than the major wheat gluten proteins and contribute important reserves for both seedling growth and human nutrition. The alpha-amylase/protease inhibitors also are of interest because they cause IgE-mediated occupational and food allergies and thereby impact human health. Results The complement of genes encoding alpha-amylase/protease inhibitors expressed in the US bread wheat Butte 86 was characterized by analysis of expressed sequence tags (ESTs. Coding sequences for 19 distinct proteins were identified. These included two monomeric (WMAI, four dimeric (WDAI, and six tetrameric (WTAI inhibitors of exogenous alpha-amylases, two inhibitors of endogenous alpha-amylases (WASI, four putative trypsin inhibitors (CMx and WTI, and one putative chymotrypsin inhibitor (WCI. A number of the encoded proteins were identical or very similar to proteins in the NCBI database. Sequences not reported previously included variants of WTAI-CM3, three CMx inhibitors and WTI. Within the WDAI group, two different genes encoded the same mature protein. Based on numbers of ESTs, transcripts for WTAI-CM3 Bu-1, WMAI Bu-1 and WTAI-CM16 Bu-1 were most abundant in Butte 86 developing grain. Coding sequences for 16 of the inhibitors were unequivocally associated with specific proteins identified by tandem mass spectrometry (MS/MS in a previous proteomic analysis of milled white flour from Butte 86. Proteins corresponding to WDAI Bu-1/Bu-2, WMAI Bu-1 and the WTAI subunits CM2 Bu-1, CM3 Bu-1 and CM16 Bu-1 were accumulated to the highest levels in flour. Conclusions Information on the spectrum of alpha-amylase/protease inhibitor genes and proteins expressed in a single wheat cultivar is central to understanding the importance of

  16. Uncommon occurrence ratios of aflatoxin B1, B 2, G 1, and G 2 in maize and groundnuts from Malawi.

    Science.gov (United States)

    Matumba, Limbikani; Sulyok, Michael; Njoroge, Samuel M C; Njumbe Ediage, Emmanuel; Van Poucke, Christof; De Saeger, Sarah; Krska, Rudolf

    2015-02-01

    We report an unusual aflatoxin profile in maize and groundnuts from Malawi, with aflatoxin G1 found routinely at equal or even higher levels than aflatoxin B1. Aflatoxin B1 (AFB1) ratio in a contaminated sample is generally greater than 50% of total aflatoxin (sum of aflatoxin B1, B2, G1, and G2). In Malawi, the aflatoxin occurrence ratios were determined by examining LC-MS/MS and HPLC fluorescence detection (FLD) data of 156 naturally contaminated raw maize and 80 groundnut samples collected in 2011 and 2012. Results showed that natural aflatoxin occurrence ratio differed. In 47% of the samples, the concentration of AFG1 was higher than that of AFB1. The mean concentration percentages of AFB1/AFB2/AFG1/AFG2 in reference to total aflatoxins were found to be 47:5:43:5%, respectively. The AFG1 and AFB1 50/50 trend was observed in maize and groundnuts and was consistent for samples collected in both years. If the AFB1 measurement was used to check compliance of total aflatoxin regulatory limit set at 10, 20, 100, and 200 μg/kg with an assumption that AFB1≥50% of the total aflatoxin content, 8, 13, 24, and 26% false negative rates would have occurred respectively. It is therefore important for legislation to consider total aflatoxins rather than AFB1 alone.

  17. Enhanced in-field critical currents of YBCO second-generation (2G) wire by Dy additions

    Energy Technology Data Exchange (ETDEWEB)

    Long, N [Industrial Research Ltd, PO Box 31-310, Lower Hutt (New Zealand); Strickland, N [Industrial Research Ltd, PO Box 31-310, Lower Hutt (New Zealand); Chapman, B [Industrial Research Ltd, PO Box 31-310, Lower Hutt (New Zealand); Ross, N [Industrial Research Ltd, PO Box 31-310, Lower Hutt (New Zealand); Xia, J [Industrial Research Ltd, PO Box 31-310, Lower Hutt (New Zealand); Li, X [American Superconductor Corporation, Westborough, MA 01581 (United States); Zhang, W [American Superconductor Corporation, Westborough, MA 01581 (United States); Kodenkandath, T [American Superconductor Corporation, Westborough, MA 01581 (United States); Huang, Y [American Superconductor Corporation, Westborough, MA 01581 (United States); Rupich, M [American Superconductor Corporation, Westborough, MA 01581 (United States)

    2005-12-15

    The addition of dysprosium oxide nanoparticles is shown to improve the critical current in perpendicular magnetic fields for second-generation (2G) wire formed by metal-organic deposition (MOD). Typical enhancements in J{sub c} are from 0.17 MA cm{sup -2} to over 0.33 MA cm{sup -2} at 77 K and B{sub perp} = 1.5 T. TEM analysis shows that we are introducing (Y,Dy){sub 2}O{sub 3} nanoparticles with dimensions of 10-50 nm. A simple theoretical analysis shows that the maximum pinning effect for additions is expected at excess concentrations of approximately 70% DyO{sub 1.5}, i.e. for YBa{sub 2}Cu{sub 3}O{sub 7-{delta}}+0.7DyO{sub 1.5} if the added nanoparticles are randomly dispersed and a strong pinning model is valid. An interesting feature is that the critical current in parallel field is reduced in these samples. We present evidence that shows this may be due to reduced planar defects in the YBCO.

  18. H-formulation for simulating levitation forces acting on HTS bulks and stacks of 2G coated conductors

    Science.gov (United States)

    Sass, F.; Sotelo, G. G.; Junior, R. de Andrade; Sirois, Frédéric

    2015-12-01

    Several techniques to model high temperature superconductors (HTSs) are used throughout the world. At the same time, the use of superconductors in transportation and magnetic bearings promises an increase in energy efficiency. However, the most widespread simulation technique in the literature, the H-formulation, has not yet been used to simulate superconducting levitation. The goal of this work is to present solutions for the challenges concerning the use of the H-formulation to predict the behavior of superconducting levitators built either with YBCO bulks or stacks of 2G wires. It is worth mentioning the originality of replacing bulks with HTS stacks in this application. In our simulation methodology, the movement between the HTS and the permanent magnet was avoided by restricting the simulation domain to the HTS itself, which can be done by applying appropriate boundary conditions and analytical expressions for the source field. Commercial finite element software was used for the sake of ease of implementation. Simulation results were compared with experimental data, showing good agreement. We conclude that the H-formulation is suitable for problems involving moving objects and is a good alternative to other approaches for simulating superconducting magnetic bearings.

  19. Studies of selected properties of high-temperature superconducting tape 2G HTS SF series - the example: tape SF12050

    Directory of Open Access Journals (Sweden)

    J. Jędryka

    2013-12-01

    Full Text Available Purpose: In presented paper were characterized selected properties of high-temperature superconducting tape 2G HTS SF series - the example of the tape SF12050. Design/methodology/approach: As part of the study smples of tape SF12050 were made. At first made to measure of chemical compsition and compared with manufacturer’s information about that kind of tape. Second step of researcher were research about adhesion of the individual layers of SF12050. After then research was made about tensile strengtht what is the justification utility, as these tapes are subjected to tension at the time of their formation and winding on the transformer core. Findings: As a result of research obtained information on the chemical composition, scratch resistance, adhesion of coating on the tape and about tensile strength. On the last step studies were conducted about critical currents - Ic. Research limitations/implications: These results allow to identify the suitability of these tapes for use on a wide scale - in particular, the winding of the transformer cores. Originality/value: On the basis of studies have demonstrated applications for which the tape may be used SF12050. Given its properties – scratch resistance and tensile strenght reistance, and information about critical current, was indicated best use of that tape for trnasformers production.

  20. A novel read-through transcript JMJD7-PLA2G4B regulates head and neck squamous cell carcinoma cell proliferation and survival

    Science.gov (United States)

    Cheng, Yingduan; Wang, Yi; Li, Jiong; Chang, Insoon; Wang, Cun-Yu

    2017-01-01

    Recent findings on the existence of oncogenic fusion genes in a wide array of solid tumors, including head and neck squamous cell carcinoma (HNSCC), suggests that fusion genes have become attractive targets for cancer diagnosis and treatment. In this study, we showed for the first time that a read-through fusion gene JMJD7-PLA2G4B is presented in HNSCC, splicing neighboring jumonji domain containing 7 (JMJD7) and phospholipase A2, group IVB (PLA2G4B) genes together. Ablation of JMJD7-PLA2G4B significantly inhibited proliferation of HNSCC cells by promoting G1 cell cycle arrest and increased starvation-induced cell death compared to JMJD7-only knockdown HNSCC cells. Mechanistically, we found that JMJD7-PLA2G4B modulates phosphorylation of Protein Kinase B (AKT) to promote HNSCC cell survival. Moreover, JMJD7-PLA2G4B also regulated an E3 ligase S-phase kinase-associated protein 2 (SKP2) to control the cell cycle progression from G1 phase to S phase by inhibiting Cyclin-dependent kinase inhibitor 1 (p21) and 1B (p27) expression. Our study provides novel insights into the oncogenic control of JMJD7-PLA2G4B in HNSCC cell proliferation and survival, and suggests that JMJD7-PLA2G4B may serve as an important therapeutic target and prognostic marker for HNSCC development and progression. PMID:28030848

  1. Experimental and analytical study of the DC breakdown characteristics of polypropylene laminated paper with a butt gap condition considering the insulation design of superconducting cable

    Science.gov (United States)

    Seo, In-jin; Choi, Won; Seong, Jae-gyu; Lee, Bang-wook; Koo, Ja-yoon

    2014-08-01

    It has been reported that the insulation design under DC stress is considered as one of the critical factors in determining the performance of high-voltage direct current (HVDC) superconducting cable. Therefore, it is fundamentally necessary to investigate the DC breakdown characteristics of the composite insulation system consisting of liquid nitrogen (LN2)/polypropylene-laminated-paper (PPLP). In particular, the insulation characteristics under DC polarity reversal condition should be verified to understand the polarity effect of the DC voltage considering the unexpected incidents taking place at line-commutated-converters (LCC) under service at a DC power grid. In this study, to examine the variation of DC electric field strength, the step voltage and polarity reversal breakdown tests are performed under DC stress. Also, we investigate the electric field distributions in a butt gap of the LN2/PPLP condition considering the DC polarity reversal by using simulation software.

  2. Influence of arc pressure on the forming of molten pool in tungsten inert gas arc butt welding with micro gap for tantalum sheet

    Institute of Scientific and Technical Information of China (English)

    Zhou Fangming; Qian Yiyu

    2006-01-01

    Arc pressure is the key influencing factor to forming of molten pool.Countering the characteristic of tungsten inert gas arc welding with micro gap for tantalum sheet, according to the fundament of arc physics, a distribution model of arc pressure and forming mechanism of molten pool with micro butt gap are proposed, and the influences of arc pressure on forming of molten pool are discussed.Experimental researches for the dynamic formation process of weld molten pool by using high-speed vidicon camera show that when buttgap is appropriate, that is from 0.1 to 0.15 mm, molten metals formed on two workpiece uplift and growup first, then are fused and form uniform molten pool finally.

  3. Influences of post weld heat treatment on tensile strength and microstructure characteristics of friction stir welded butt joints of AA2014-T6 aluminum alloy

    Science.gov (United States)

    Rajendran, C.; Srinivasan, K.; Balasubramanian, V.; Balaji, H.; Selvaraj, P.

    2016-08-01

    Friction stir welded (FSWed) joints of aluminum alloys exhibited a hardness drop in both the advancing side (AS) and retreating side (RS) of the thermo-mechanically affected zone (TMAZ) due to the thermal cycle involved in the FSW process. In this investigation, an attempt has been made to overcome this problem by post weld heat treatment (PWHT) methods. FSW butt (FSWB) joints of Al-Cu (AA2014-T6) alloy were PWHT by two methods such as simple artificial aging (AA) and solution treatment followed by artificial aging (STA). Of these two treatments, STA was found to be more beneficial than the simple aging treatment to improve the tensile properties of the FSW joints of AA2014 aluminum alloy.

  4. Busted Butte Unsaturated Zone Transport Test: Fiscal Year 1998 Status Report Yucca Mountain Site Characterization Program Deliverable SPU85M4

    Energy Technology Data Exchange (ETDEWEB)

    Bussod, G.Y.; Turin, H.J.; Lowry, W.E.

    1999-11-01

    This report describes the status of the Busted Butte Unsaturated Zone Transport Test (UZTT) and documents the progress of construction activities and site and laboratory characterization activities undertaken in fiscal year 1998. Also presented are predictive flow-and-transport simulations for Test Phases 1 and 2 of testing and the preliminary results and status of these test phases. Future anticipated results obtained from unsaturated-zone (UZ) transport testing in the Calico Hills Formation at Busted Butte are also discussed in view of their importance to performance assessment (PA) needs to build confidence in and reduce the uncertainty of site-scale flow-and-transport models and their abstractions for performance for license application. The principal objectives of the test are to address uncertainties associated with flow and transport in the UZ site-process models for Yucca Mountain, as identified by the PA working group in February 1997. These include but are not restricted to: (1) The effect of heterogeneities on flow and transport in unsaturated and partially saturated conditions in the Calico Hills Formation. In particular, the test aims to address issues relevant to fracture-matrix interactions and permeability contrast boundaries; (2) The migration behavior of colloids in fractured and unfractured Calico Hills rocks; (3) The validation through field testing of laboratory sorption experiments in unsaturated Calico Hills rocks; (4) The evaluation of the 3-D site-scale flow-and-transport process model (i.e., equivalent-continuum/dual-permeability/discrete-fracture-fault representations of flow and transport) used in the PA abstractions for license application; and (5) The effect of scaling from lab scale to field scale and site scale.

  5. The phzA2-G2 transcript exhibits direct RsmA-mediated activation in Pseudomonas aeruginosa M18.

    Directory of Open Access Journals (Sweden)

    Bin Ren

    Full Text Available In bacteria, RNA-binding proteins of the RsmA/CsrA family act as post-transcriptional regulators that modulate translation initiation at target transcripts. The Pseudomonas aeruginosa genome contains two phenazine biosynthetic (phz gene clusters, phzA1-G1 (phz1 and phzA2-G2 (phz2, each of which is responsible for phenazine-1-carboxylic acid (PCA biosynthesis. In the present study, we show that RsmA exhibits differential gene regulation on two phz clusters in P. aeruginosa M18 at the post-transcriptional level. Based on the sequence analysis, four GGA motifs, the potential RsmA binding sites, are found on the 5'-untranslated region (UTR of the phz2 transcript. Studies with a series of lacZ reporter fusions, and gel mobility shift assays suggest that the third GGA motif (S3, located 21 nucleotides upstream of the Shine-Dalgarno (SD sequence, is involved in direct RsmA-mediated activation of phz2 expression. We therefore propose a novel model in which the binding of RsmA to the target S3 results in the destabilization of the stem-loop structure and the enhancement of ribosome access. This model could be fully supported by RNA structure prediction, free energy calculations, and nucleotide replacement studies. In contrast, various RsmA-mediated translation repression mechanisms have been identified in which RsmA binds near the SD sequence of target transcripts, thereby blocking ribosome access. Similarly, RsmA is shown to negatively regulate phz1 expression. Our new findings suggest that the differential regulation exerted by RsmA on the two phz clusters may confer an advantage to P. aeruginosa over other pseudomonads containing only a single phz cluster in their genomes.

  6. Construction of eukaryotic expression plasmids for HbsAg and HSV-2gD antigens%HBsAg、HSV-2gD双抗原真核表达载体的构建

    Institute of Scientific and Technical Information of China (English)

    郑绮菡; 王玉; 焦凤萍; 于爱莲; 于广福

    2012-01-01

    目的 利用简并引物PCR法及重叠PCR法构建HBsAg(S),HSV-2gD模拟抗原表位P6及天然抗原表位NP6,IL-18真核表达载体,并对其表达能力进行鉴定,为后期疫苗的研制奠定基础.方法 采用简并引物PCR法扩增IL-18-P6(包括P6-IL-18)片段及IL-18-NP6(包括NP6-IL-18);根据GenBank(FJ589066.1)公布的S基因设计引物,扩增获得含有重叠区的S片段(包括S1,S2,S3,S4);采用重叠PCR法扩增三基因融合片段IL-18-P6-S,IL-18-NP6 S,S-P6-IL-18和S-NP6-IL-18,经纯化回收后将其克隆到原核载体pMD 18-T simple vector中,测序正确的目的片段插入真核表达载体pcDNA3.1(-),构建重组质粒pcDNA3.1-IL-18-P6-S,pcDNA3.1-IL-18-NP6-S,pcDNA3.1-S-P6-IL-18和pcD-NA3.1-S-NP6-IL-18,采用间接免疫荧光法检测靶基因的表达情况.结果 成功构建了含有双抗原的真核表达载体pcDNA3.1-IL-18-P6-S,pcDNA3.1-IL-18-NP6-S,pcDNA3.1-S-P6-IL-18和pcDNA3.1-S-NP6-IL-18.脂质体介导真核表达载体转染CHO细胞,间接免疫荧光法检测细胞浆中有黄绿色荧光.结论 构建的真核表达载体pcDNA3.1-IL-18-P6-S,pcDNA3.1-IL-18-NP6-S,pcDNA3.1-S-P6-IL-18和pcDNA3.1-S-NP6-IL-18能在CHO细胞中有效表达.%Objective Degenerate primer PCR and overlapping PCR were used to construct IL-18 eukaryotic expression plasmids for natural epitope NP6 and epitope P6 derived from HBsAg(S) and HSV-2gD. Expression of plasmids was determined, laying the foundation for subsequent research. Methods Fragments of IL-18-P6 (including fragments of PS-IL-18) , and IL-18-NP6 (including NP6-IL-18) were subjected to degenerate primer PCR. Primers were designed in accordance with the S gene in GenBank (FJ589066. 1) , and S fragments containing the overlapping zone (including S1, S2, S3, and S4) were obtained. Fragments of the 4 fusion genes IL-18-P6-S, IL-18-NP6-S, S-P6-IL-18, and S-NP6-IL-18 were amplified by overlapping PCR. purified, and inserted into a pMD-18-T simple vector. Correct sequence fragments were

  7. MD SIMULATION STUDIES TO INVESTIGATE ISO-ENERGETIC CONFORMATIONAL BEHAVIOUR OF MODIFIED NUCLEOSIDES M2G AND M22G PRESENT IN tRNA

    Directory of Open Access Journals (Sweden)

    Rohit S Bavi

    2013-02-01

    Full Text Available Modified nucleic acid bases are most commonly found in tRNA. These may contain modifications from simple methylation to addition of bulky groups. Methylation of the four canonical nucleotide bases at a wide variety of positions is particularly prominent among the known modification. Methylation of N2 group of guanine is a relatively common modification in tRNA and rRNA. N2-methylguanosine (m2G is the second most often encountered nucleoside in E. coli tRNAs. N2, N2-dimethylguanosine (m22G is found in the majority of eukaryotic tRNAs and involved in forming base pair interactions with adjacent bases. Hence, in order to understand the structural significance of these methylated nucleic acid bases we have carried out molecular dynamics simulation to see the salvation effect. The results obtained shows iso-energetic conformational behaviors for m2G and m22G. The simulation trajectory of m2G shows regular periodical fluctuations suggesting that m2G is equally stable as either s-cis or s-trans rotamers. The two rotamers of m2G may interact canonically or non-canonically with opposite base as s-trans m2G26:C/A/U44 and s-cis m2G26:A/U44. The free rotations around the C-N bond could be the possible reason for these iso-energetic conformations. Dimethylation of G has almost no influence on base pairing with either A or U. Thus, these results reveal that modified nucleosides m2G and m22G may play an important role to prevent tRNA from adopting the unusual mitochondrial like conformation.

  8. Effects of Long Term Exposure of 900-1800 MHz Radiation Emitted from 2G Mobile Phone on Mice Hippocampus- A Histomorphometric Study

    Science.gov (United States)

    Shanmugasamy, Kathirvelu; Anbalagan, Jayaram; Rajanarayanan, Swamynathan; Meenachi, Swamynathan

    2016-01-01

    Introduction The advancement in the telecommunications technology with multi-functional added features in mobile phone, attracts more users of all age group. It is alarming to note that, the mobile phone use has increased amongst children and they are exposed to potentially harmful radiofrequency radiation in their lifetime. Aim To investigate the long term exposure of 900 to 1800 MHz radiations emitted from 2G mobile phone in mice hippocampus at histomorphometric level. Materials and Methods With due approval from institutional animal ethics committee, 36 mice were exposed to 2G mobile phone radiation, 48 minutes per day for a period of 30-180 days. The control group was kept under similar conditions without 2G exposure. Mice were sacrificed and the brain was removed from the first month to six months period. Brain was removed from the cranial cavity and hippocampus region was dissected out carefully and processed for routine histological study. Random serial sections were analysed under microscope for histomorphometric changes. For statistical analysis, independent t-test was used for comparing control and 2G exposed groups. Results The mean density of neurons in the hippocampus regions CA1, CA2 and DGDB from first to sixth month was significantly lower in the 2G exposed groups; however, in CA3 and DGVB, the 2G exposed mice showed significantly higher density of neurons. The mean nuclear diameter of neurons in the hippocampus region of CA1, CA2, CA3, DGDB and DGVB from first to sixth months showed lower nuclear diameter in 2G exposed mice. Conclusion The long term exposure to 900-1800 MHz frequency radiations emitted from 2G mobile phone could cause significantly reduced neuron density and decreased nuclear diameter in the hippocampus neurons of mice. PMID:27656427

  9. Beyond batteries: An examination of the benefits and barriers to plug-in hybrid electric vehicles (PHEVs) and a vehicle-to-grid (V2G) transition

    Energy Technology Data Exchange (ETDEWEB)

    Sovacool, Benjamin K. [Energy Governance Program, Centre on Asia and Globalisation, Lee Kuan Yew School of Public Policy, National University of Singapore (Singapore)], E-mail: bsovacool@nus.edu.sg; Hirsh, Richard F. [History and Science and Technology Studies, Virginia Polytechnic Institute and State University, Blacksburg (United States)], E-mail: richard@vt.edu

    2009-03-15

    This paper explores both the promise and the possible pitfalls of the plug-in hybrid electric vehicles (PHEV) and vehicle-to-grid (V2G) concept, focusing first on its definition and then on its technical state-of-the-art. More originally, the paper assesses significant, though often overlooked, social barriers to the wider use of PHEVs (a likely precursor to V2G) and implementation of a V2G transition. The article disputes the idea that the only important barriers facing the greater use of PHEVs and V2G systems are technical. Instead, it provides a broader assessment situating such 'technical' barriers alongside more subtle impediments relating to social and cultural values, business practices, and political interests. The history of other energy transitions, and more specifically the history of renewable energy technologies, implies that these 'socio-technical' obstacles may be just as important to any V2G transition-and perhaps even more difficult to overcome. Analogously, the article illuminates the policy implications of such barriers, emphasizing what policymakers need to achieve a transition to a V2G and PHEV world.

  10. Beyond batteries. An examination of the benefits and barriers to plug-in hybrid electric vehicles (PHEVs) and a vehicle-to-grid (V2G) transition

    Energy Technology Data Exchange (ETDEWEB)

    Sovacool, Benjamin K. [Energy Governance Program, Centre on Asia and Globalisation, Lee Kuan Yew School of Public Policy, National University of Singapore (Singapore); Hirsh, Richard F. [History and Science and Technology Studies, Virginia Polytechnic Institute and State University, Blacksburg (United States)

    2009-03-15

    This paper explores both the promise and the possible pitfalls of the plug-in hybrid electric vehicles (PHEV) and vehicle-to-grid (V2G) concept, focusing first on its definition and then on its technical state-of-the-art. More originally, the paper assesses significant, though often overlooked, social barriers to the wider use of PHEVs (a likely precursor to V2G) and implementation of a V2G transition. The article disputes the idea that the only important barriers facing the greater use of PHEVs and V2G systems are technical. Instead, it provides a broader assessment situating such 'technical' barriers alongside more subtle impediments relating to social and cultural values, business practices, and political interests. The history of other energy transitions, and more specifically the history of renewable energy technologies, implies that these 'socio-technical' obstacles may be just as important to any V2G transition - and perhaps even more difficult to overcome. Analogously, the article illuminates the policy implications of such barriers, emphasizing what policymakers need to achieve a transition to a V2G and PHEV world. (author)

  11. Liquid-exfoliation of layered MoS2 for enhancing photocatalytic activity of TiO2/g-C3N4 photocatalyst and DFT study

    Science.gov (United States)

    Zhang, Weiping; Xiao, Xinyan; Li, Yang; Zeng, Xingye; Zheng, Lili; Wan, Caixia

    2016-12-01

    A new combined method of liquid-exfoliation and solvothermal process was employed for synthesizing TiO2/g-C3N4/MoS2 photocatalysts. In this typical process, the MoS2/g-C3N4 nano-sheets was prepared by liquid-exfoliation method from the bulk MoS2 and bulk carbon nitride in the alcohol system, and then the TiO2 nanoparticles (NPs) were grown on the MoS2/g-C3N4 nano-sheets by in-situ synthesis technique. The evaluation of photocatalytic degradation reaction showed that the as-prepared TiO2/g-C3N4/MoS2 photocatalysts exhibited higher photocatalytic activity as compared to the pure TiO2, pure g-C3N4 and TiO2/g-C3N4 composite. The enhanced photocatalytic activities of TiO2/g-C3N4/MoS2 photocatalysts are attributed to positive synergetic effect of heterostructure between g-C3N4/MoS2 hybrid and TiO2 nano-structure, which not only enlarged spectral response and also enhanced the utilization rate of photons. Furthermore, DFT (Density Functional Theory) was employed to investigate the formation mechanism of the interfaces between TiO2 NPs and g-C3N4/MoS2 nano-sheets, which would be of great importance in revealing the electron-transfer at the interfaces of composites and the mechanism for the great improvement for the activity of TiO2/g-C3N4/MoS2 photocatalysts.

  12. Maps showing mineral resource assessment for porphyry and stockwork deposits of copper, molybdenum, and tungsten and for stockwork and disseminated deposits of gold and silver in the Butte 1 degree by 2 degrees Quadrangle, Montana

    Science.gov (United States)

    Elliott, J.E.; Moll, S.H.; Wallace, C.A.; Lee, G.K.; Antweiler, J.C.; Lidke, D.J.; Rowan, L.C.; Hanna, W.F.; Trautwein, C.M.; Dwyer, J.L.

    1993-01-01

    This report documents the assessment for potential occurrences of undiscovered porphyry and stockwork deposits of copper, molybdenum, and tungsten (porphyry Cu-Mo-W) and stockwork and disseminated deposits of gold and silver (disseminated Au-Ag) in the Butte 1 °X2° quadrangle. The Butte quadrangle, in west-central Montana, is one of the best known mineral producing regions in the U.S. Mining districts in the quadrangle, including the world famous Butte or Summit Valley district, have produced a variety of metallic and nonmetallic mineral commodities valued at more than $6.4 billion (at the time of production). Because of its importance as a mineral producing region, the Butte quadrangle was selected for study by the U.S. Geological Survey under the Conterminous United States Mineral Assessment Program (CUSMAP). Under this program, new data on geology, geochemistry, geophysics, geochronology, mineral resources, and remote sensing were collected and synthesized. The field and laboratory studies were supported, in part, by funding from the Geologic Framework and Synthesis Program and the Wilderness Program. The methods used in this resource assessment for porphyry Cu-Mo-W and disseminated Au-Ag deposits in the quadrangle include a compilation of all data, the development of descriptive occurrence models, and the analysis of data using techniques provided by a Geographic Information System (GIS). This map is one of several maps on the Butte 1 °X2° quadrangle. Other deposit types have been assessed for the Butte quadrangle, and maps (U.S. Geological Survey (USGS) Miscellaneous Investigation Series Maps) for each of the following have been prepared: Vein and replacement deposits of gold, silver, copper, lead, zinc, manganese, and tungsten (Elliott, Wallace, and others, 1992a) and skarn deposits of gold, silver, copper, tungsten, and iron (Elliott and others, 1992b ). Other publications resulting from this study include linear features map (Rowan and others, 1991

  13. Renormalized Volume

    CERN Document Server

    Gover, A Rod

    2016-01-01

    For any conformally compact manifold with hypersurface boundary we define a canonical renormalized volume functional and compute an explicit, holographic formula for the corresponding anomaly. For the special case of asymptotically Einstein manifolds, our method recovers the known results. The anomaly does not depend on any particular choice of regulator, but the coefficients of divergences do. We give explicit formulae for these divergences valid for any choice of regulating hypersurface; these should be relevant to recent studies of quantum corrections to entanglement entropies. The anomaly is expressed as a conformally invariant integral of a local Q-curvature that generalizes the Branson Q-curvature by including data of the embedding. In each dimension this canonically defines a higher dimensional generalization of the Willmore energy/rigid string action. We show that the variation of these energy functionals is exactly the obstruction to solving a singular Yamabe type problem with boundary data along the...

  14. UV-assisted synthesis of surface modified mesoporous TiO2/G microspheres and its electrochemical performances in lithium ion batteries

    Science.gov (United States)

    Tong, Xiaoling; Zeng, Min; Li, Jing; Li, Fuyun

    2017-01-01

    Three-dimensional mesoporous TiO2/graphene (TiO2/G) microspheres have been successfully synthesized through a simple UV-assisted method of reduced graphene oxide with hydrazine. The as-made surface modified mesoporous TiO2/G microspheres possess large surface area and exhibit a high initial discharge capacity of 220 mAh g-1 and retain 84% (∼185 mAh g-1) of reversible capacity over 100 cycles at a rate of 0.2C. In addition, TiO2/G microspheres display improved cyclic performance, excellent rate capability and enhanced electrical conductivity, which are superior to the bare TiO2 microspheres. Furthermore, TiO2/G microspheres can achieve a reversible capacity of 141 mAh g-1 upon 100 cycles even at the 1C rate. We believe that the mesoporous TiO2/G microspheres are expected to be a promising high performance anode material for the next generation lithium ion batteries.

  15. De novo sequence analysis of cytochrome P450 1-3 genes expressed in ostrich liver with highest expression of CYP2G19.

    Science.gov (United States)

    Kawai, Yusuke K; Watanabe, Kensuke P; Ishii, Akihiro; Ohnuma, Aiko; Sawa, Hirofumi; Ikenaka, Yoshinori; Ishizuka, Mayumi

    2013-09-01

    The cytochrome P450 (CYP) 1-3 families are involved in xenobiotic metabolism, and are expressed primarily in the liver. Ostriches (Struthio camelus) are members of Palaeognathae with the earliest divergence from other bird lineages. An understanding of genes coding for ostrich xenobiotic metabolizing enzyme contributes to knowledge regarding the xenobiotic metabolisms of other Palaeognathae birds. We investigated CYP1-3 genes expressed in female ostrich liver using a next-generation sequencer. We detected 10 CYP genes: CYP1A5, CYP2C23, CYP2C45, CYP2D49, CYP2G19, CYP2W2, CYP2AC1, CYP2AC2, CYP2AF1, and CYP3A37. We compared the gene expression levels of CYP1A5, CYP2C23, CYP2C45, CYP2D49, CYP2G19, CYP2AF1, and CYP3A37 in ostrich liver and determined that CYP2G19 exhibited the highest expression level. The mRNA expression level of CYP2G19 was approximately 2-10 times higher than those of other CYP genes. The other CYP genes displayed similar expression levels. Our results suggest that CYP2G19, which has not been a focus of previous bird studies, has an important role in ostrich xenobiotic metabolism.

  16. Association between matrix metalloproteinase 1 -1607 1G>2G polymorphism and cancer risk: a meta-analysis including 19706 subjects.

    Science.gov (United States)

    Han, Guoda; Wei, Zhijiang; Lu, Zhiliang; Cui, Haibin; Bai, Xiyong; Ge, Huai'e; Zhang, Wei

    2014-01-01

    The association between MMP1 -1607 1G>2G polymorphism and cancer risk has been reported, but results remained controversial and ambiguous. To assess the association between MMP1 -1607 1G>2G polymorphism and cancer risk, a meta-analysis was performed. Based on comprehensive searches of the PubMed, Elsevier Science Direct, Excerpta Medica Database (Embase), and Chinese Biomedical Literature Database (CBM), we identified outcome data from all articles estimating the association between MMP1 -1607 1G>2G polymorphism and cancer risk. The pooled odds ratio (OR) with 95% confidence intervals (CIs) were calculated. Thirty-eight studies involving 10178 cases and 9528 controls were included. Overall, significant association between MMP1 -1607 1G>2G polymorphism and cancer susceptibility was observed for additive model (OR = 1.21, 95% CI 1.09-1.35), for codominant model (OR = 1.34, 95% CI 1.10-1.63), for dominant model (OR = 1.17, 95% CI 1.01-1.34), for recessive model (OR = 1.31, 95% CI 1.14-1.52). In the subgroup analysis by ethnicity, the significant association was found among Asians but not among Caucasians. In the subgroup analysis by site of cancer, significant associations were found among lung cancer, colorectal cancer, head and neck cancer and bladder cancer. This meta-analysis demonstrated that the MMP1 -1607 1G>2G polymorphism was significantly associated with cancer risk.

  17. Identification of two novel Rhizoctonia solani-inducible cis-acting elements in the promoter of the maize gene, GRMZM2G315431

    Science.gov (United States)

    Li, Ning; Chen, Jing; Yang, Fangfang; Wei, Shutong; Kong, Lingguang; Ding, Xinhua; Chu, Zhaohui

    2017-01-01

    Plants are continuously exposed to myriad pathogen stresses. However, the molecular mechanisms by which these stress signals are perceived and transduced are poorly understood. In this study, the maize gene GRMZM2G315431 was identified to be highly inducible by Rhizoctonia solani infection, suggesting that the promoter of GRMZM2G315431 (pGRMZM2G315431) might contain a specific cis-acting element responsive to R. solani attack. To identify the R. solani-responsive element in pGRMZM2G315431, a series of binary plant transformation vectors were constructed by fusing pGRMZM2G315431 or its deletion-derivatives with the reporter genes. In the transient gene expression system of Nicotiana benthamiana leaves inoculated with R. solani, GUS quantification suggested that the DNA fragment contains the unknown pathogen-inducible cis-elements in the −1323 to −1212 region. Furthermore, detailed quantitative assays showed that two novel cis-elements, GTTGA in the −1243 to −1239 region and TATTT in the −1232 to −1228 region, were responsible for the R. solani-inducible activity. These two cis-elements were also identified to have R. solani-specific-inducible activity in stable transgenic rice plants, suggesting the existence of a novel regulation mechanism involved in the interaction between R. solani and Zea mays. PMID:28163300

  18. Structural Basis for Enhanced HIV-1 Neutralization by a Dimeric Immunoglobulin G Form of the Glycan-Recognizing Antibody 2G12

    Directory of Open Access Journals (Sweden)

    Yunji Wu

    2013-12-01

    Full Text Available The human immunoglobulin G (IgG 2G12 recognizes high-mannose carbohydrates on the HIV type 1 (HIV-1 envelope glycoprotein gp120. Its two antigen-binding fragments (Fabs are intramolecularly domain exchanged, resulting in a rigid (Fab2 unit including a third antigen-binding interface not found in antibodies with flexible Fab arms. We determined crystal structures of dimeric 2G12 IgG created by intermolecular domain exchange, which exhibits increased breadth and >50-fold increased neutralization potency compared with monomeric 2G12. The four Fab and two fragment crystalline (Fc regions of dimeric 2G12 were localized at low resolution in two independent structures, revealing IgG dimers with two (Fab2 arms analogous to the Fabs of conventional monomeric IgGs. Structures revealed three conformationally distinct dimers, demonstrating flexibility of the (Fab2-Fc connections that was confirmed by electron microscopy, small-angle X-ray scattering, and binding studies. We conclude that intermolecular domain exchange, flexibility, and bivalent binding to allow avidity effects are responsible for the increased potency and breadth of dimeric 2G12.

  19. An introduction to the design and fabrication progress of a megawatt class 2G HTS motor for the ship propulsion application

    Science.gov (United States)

    Moon, Heejong; Kim, Yeong-Chun; Park, Heui-Joo; Yu, In-Keun; Park, Minwon

    2016-03-01

    This paper introduces the design and fabrication progress of a megawatt class 2G high temperature superconductor (HTS) motor for the ship propulsion application at Doosan Heavy Industries and Construction. The purpose of this 2G HTS propulsion motor is to launch the business area for marine applications such as surface ship, submarine, merchant ship etc. The principles and interpretation of the magnetic field for 2G HTS motor and permanent magnet type motors are similar on the basis of 3D design and production. The most important component of an HTS motor is the rotor, which is composed of HTS coil, non-ferrous metal, torque disk, damper, and hollow shaft. A HTS rotor using hastelloy-based 2G HTS coils was designed and built. Open-circuit and short-circuit characteristics of the superconducting motor were investigated and compared with the analysis results at reduced excitation to verify the design. Preliminary testing of a 2G HTS motor has been conducted at a few hundred kilowatts as per the design. Through these results, we anticipate that most of the design criteria can be satisfied. However, we have faced several issues during the testing of the motor and these issues need to be resolved in order to take the design further.

  20. Encyclopedia of Explosives and Related Items. Volume 8

    Science.gov (United States)

    1978-01-01

    this volume. Others who contributed to the manuscript, by invitation, are indicated at the end of the articles Dr Raymond F. Walker, Energetics...Solvents Peroxomonosulfuric Acid, Explodes violently on warming 1) A. Bayer , Ber 33 (1900), H2 0 5 S: Solvent above 00 or on contact with w, 858 2) G

  1. Proteomics study of extracellular fibrinolytic proteases from Bacillus licheniformis RO3 and Bacillus pumilus 2.g isolated from Indonesian fermented food

    Science.gov (United States)

    Nur Afifah, Diana; Rustanti, Ninik; Anjani, Gemala; Syah, Dahrul; Yanti; Suhartono, Maggy T.

    2017-02-01

    This paper presents the proteomics study which includes separation, identification and characterization of proteins. The experiment on Indonesian fermented food such as extracellular fibrinolytic protease from Bacillus licheniformis RO3 and Bacillus pumilus 2.g isolated from red oncom and tempeh gembus was conducted. The experimental works comprise the following steps: (1) a combination of one- and two-dimensional electrophoresis analysis, (2) mass spectrometry analysis using MALDI-TOF-MS and (3) investigation using protein database. The result suggested that there were new two protein fractions of B. licheniformis RO3 and three protein fractions of B. pumilus 2.g. These result has not been previously reported.

  2. Numerical Modelling Of Thermal And Structural Phenomena In Yb:YAG Laser Butt-Welded Steel Elements

    Directory of Open Access Journals (Sweden)

    Kubiak M.

    2015-06-01

    Full Text Available The numerical model of thermal and structural phenomena is developed for the analysis of Yb:YAG laser welding process with the motion of the liquid material in the welding pool taken into account. Temperature field and melted material velocity field in the fusion zone are obtained from the numerical solution of continuum mechanics equations using Chorin projection method and finite volume method. Phase transformations in solid state are analyzed during heating and cooling using classical models of the kinetics of phase transformations as well as CTA and CCT diagrams for welded steel. The interpolated heat source model is developed in order to reliably reflect the real distribution of Yb:YAG laser power obtained by experimental research on the laser beam profile.

  3. Calcination Method Synthesis of SnO2/g-C3N4 Composites for a High-Performance Ethanol Gas Sensing Application

    Science.gov (United States)

    Cao, Jianliang; Qin, Cong; Wang, Yan; Zhang, Bo; Gong, Yuxiao; Zhang, Huoli; Sun, Guang; Bala, Hari; Zhang, Zhanying

    2017-01-01

    The SnO2/g-C3N4 composites were synthesized via a facile calcination method by using SnCl4·5H2O and urea as the precursor. The structure and morphology of the as-synthesized composites were characterized by the techniques of X-ray diffraction (XRD), the field-emission scanning electron microscopy and transmission electron microscopy (SEM and TEM), energy dispersive spectrometry (EDS), thermal gravity and differential thermal analysis (TG-DTA), and N2-sorption. The analysis results indicated that the as-synthesized samples possess the two dimensional structure. Additionally, the SnO2 nanoparticles were highly dispersed on the surface of the g-C3N4nanosheets. The gas-sensing performance of the as-synthesized composites for different gases was tested. Moreover, the composite with 7 wt % g-C3N4 content (SnO2/g-C3N4-7) SnO2/g-C3N4-7 exhibits an admirable gas-sensing property to ethanol, which possesses a higher response and better selectivity than that of the pure SnO2-based sensor. The high surface area of the SnO2/g-C3N4 composite and the good electronic characteristics of the two dimensional graphitic carbon nitride are in favor of the elevated gas-sensing property. PMID:28468245

  4. Development of V2G and G2V Power Profiles and Their Implications on Grid Under Varying Equilibrium of Aggregated Electric Vehicles

    Science.gov (United States)

    Jain, Prateek; Jain, Trapti

    2016-04-01

    The objective of this paper is to examine the vehicle-to-grid (V2G) power capability of aggregated electric vehicles (EV) in the manner that they are being adopted by the consumers with their growing infiltration in the vehicles market. The proposed modeling of V2G and grid-to-vehicle (G2V) energy profiles blends the heterogeneous attributes namely, driven mileages, arrival and departure times, travel and parking durations, and speed dependent energy consumption of mobility trends. Three penetration percentages of 25 %, 50 % and 100 % resulting in varied compositions of battery electric vehicle (BEV) and plug-in hybrid electric vehicle (PHEV) in the system, as determined by the consumers' acceptance, have been considered to evaluate the grid capacity for V2G. Distinct charge-discharge powers have been selected as per charging standards to match contemporary vehicles and infrastructure requirements. Charging and discharging approaches have been devised to replicate non-linear characteristics of Li-ion battery. Effects of simultaneous conjunction of V2G and G2V power curves with daily conventional load profile are quantified drawn upon workplace-discharging home-charging scheme. Results demonstrated a marked drop in load and hence in market price during morning hours which is hurriedly overcompensated by the hike during evening hours with rising penetration level and charge-discharge power.

  5. Intermediate layer, microstructure and mechanical properties of aluminum alloy/stainless steel butt joint using laser-MIG hybrid welding-brazing method

    Science.gov (United States)

    Zhu, Zongtao; Wan, Zhandong; Li, Yuanxing; Xue, Junyu; Hui, Chen

    2017-07-01

    Butt joining of AA6061 aluminum (Al) alloy and 304 stainless steel of 2-mm thickness was conducted using laser-MIG hybrid welding-brazing method with ER4043 filler metal. To promote the mechanical properties of the welding-brazing joints, two kinds of intermediate layers (Al-Si-Mg alloy and Ag-based alloy) are used to adjust the microstructures of the joints. The brazing interface and the tensile strength of the joints were characterized. The results showed that the brazing interface between Al alloy and stainless steel consisted of double layers of Fe2Al5 (near stainless steel) and Fe4Al13 intermetallic compounds (IMCs) with a total thickness of 3.7 μm, when using Al-Si-Mg alloy as the intermediate layer. The brazing interface of the joints using Ag-based alloy as intermediate layer also consists of double IMC layers, but the first layer near stainless steel was FeAl2 and the total thickness of these two IMC layers decreased to 3.1 μm. The tensile strength of the joints using Al-Si-Mg alloy as the intermediate layer was promoted to 149 MPa, which was 63 MPa higher than that of the joints using Al-Si-Mg alloy as the intermediate layer. The fractures occurred in the brazing interface between Al alloy and stainless steel.

  6. The influence of drug-excipient and drug-polymer interactions on butt adhesive strength of ranitidine hydrochloride film-coated tablets.

    Science.gov (United States)

    Sarisuta, Narong; Lawanprasert, Pojawon; Puttipipatkhachorn, Satit; Srikummoon, Krisana

    2006-04-01

    The influence of fillers and polymeric films on adhesive strength of hydroxypropyl methylcellulose (HPMC) and Eudragit E100 films coated on ranitidine HCl tablets containing either spray-dried rice starch (SDRS) or lactose monohydrate as fillers after storage at 45 degrees C/75% RH for four weeks was investigated by the use of butt adhesion technique. The adhesive strength of film-coated tablets of fillers without drug was found to slightly decrease after storage. In contrast, the adhesive strength of drug-containing film-coated tablets significantly reduced, the degree of which was higher for Eudragit E100 than HPMC. Physicochemical characterization by employing differential scanning calorimetry (DSC) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that the drug was obviously incompatible with lactose and possibly mild interaction with Eudragit E100 was suggested. The results indicated that the adhesive strength of film-coated tablets would be affected not only by the drug-excipient interaction, but also by the drug-polymeric film interaction.

  7. Retail yields and palatability evaluations of individual muscles from wet-aged and dry-aged beef ribeyes and top sirloin butts that were merchandised innovatively.

    Science.gov (United States)

    Smith, A M; Harris, K B; Griffin, D B; Miller, R K; Kerth, C R; Savell, J W

    2014-05-01

    Paired ribeyes (n=24) and top sirloin butts (n=24) were dry-aged or wet-aged for 35 days before being merchandised as individual muscles: M. spinalis thoracis, M. longissimus thoracis, M. gluteobiceps, and M. gluteus medius. Wet-aged subprimals had greater saleable yields than dry-aged. Dry-aged M. spinalis thoracis and M. gluteobiceps received lower consumer overall like and flavor ratings than did wet-aged; interior muscles - M. longissimus thoracis and M. gluteus medius - did not differ. Trained panelists found higher musty and putrid flavors for dry-aged muscles closer to exterior surface. These flavors may have contributed to lower consumer overall like and flavor ratings for dry-aged M. spinalis thoracis and M. gluteobiceps. Using innovative styles to cut beef allows for greater merchandising options. However, development of undesirable flavor characteristics may be more pronounced when exterior muscles - M. spinalis thoracis and M. gluteobiceps - are exposed during dry-aging to extreme conditions and are consumed individually.

  8. Prediction of the Vickers Microhardness and Ultimate Tensile Strength of AA5754 H111 Friction Stir Welding Butt Joints Using Artificial Neural Network

    Directory of Open Access Journals (Sweden)

    Luigi Alberto Ciro De Filippis

    2016-11-01

    Full Text Available A simulation model was developed for the monitoring, controlling and optimization of the Friction Stir Welding (FSW process. This approach, using the FSW technique, allows identifying the correlation between the process parameters (input variable and the mechanical properties (output responses of the welded AA5754 H111 aluminum plates. The optimization of technological parameters is a basic requirement for increasing the seam quality, since it promotes a stable and defect-free process. Both the tool rotation and the travel speed, the position of the samples extracted from the weld bead and the thermal data, detected with thermographic techniques for on-line control of the joints, were varied to build the experimental plans. The quality of joints was evaluated through destructive and non-destructive tests (visual tests, macro graphic analysis, tensile tests, indentation Vickers hardness tests and t thermographic controls. The simulation model was based on the adoption of the Artificial Neural Networks (ANNs characterized by back-propagation learning algorithm with different types of architecture, which were able to predict with good reliability the FSW process parameters for the welding of the AA5754 H111 aluminum plates in Butt-Joint configuration.

  9. Laser-based welding of 17-4 PH martensitic stainless steel in a tubular butt joint configuration with a built-in backing bar

    Science.gov (United States)

    Ma, Junjie; Atabaki, Mehdi Mazar; Liu, Wei; Pillai, Raju; Kumar, Biju; Vasudevan, Unnikrishnan; Kovacevic, Radovan

    2016-08-01

    Laser-based welding of thick 17-4 precipitation hardening (PH) martensitic stainless steel (SS) plates in a tubular butt joint configuration with a built-in backing bar is very challenging because the porosity and cracks are easily generated in the welds. The backing bar blocked the keyhole opening at the bottom surface through which the entrapped gas could escape, and the keyhole was unstable and collapsed overtime in a deep partially penetrated welding conditions resulting in the formation of pores easily. Moreover, the fast cooling rate prompted the ferrite transform to austenite which induced cracking. Two-pass welding procedure was developed to join 17-4 PH martensitic SS. The laser welding assisted by a filler wire, as the first pass, was used to weld the groove shoulder. The added filler wire could absorb a part of the laser beam energy; resulting in the decreased weld depth-to-width ratio and relieved intensive restraint at the weld root. A hybrid laser-arc welding or a gas metal arc welding (GMAW) was used to fill the groove as the second pass. Nitrogen was introduced to stabilize the keyhole and mitigate the porosity. Preheating was used to decrease the cooling rate and mitigate the cracking during laser-based welding of 17-4 PH martensitic SS plates.

  10. Effects of filling material and laser power on the formation of intermetallic compounds during laser-assisted friction stir butt welding of steel and aluminum alloys

    Science.gov (United States)

    Fei, Xinjiang; Jin, Xiangzhong; Peng, Nanxiang; Ye, Ying; Wu, Sigen; Dai, Houfu

    2016-11-01

    In this paper, two kinds of materials, Ni and Zn, are selected as filling material during laser-assisted friction stir butt welding of Q235 steel and 6061-T6 aluminum alloy, and their influences on the formation of intermetallic compounds on the steel/aluminum interface of the joints were first studied. SEM was used to analyze the profile of the intermetallic compound layer and the fractography of tensile fracture surfaces. In addition, EDS was applied to investigate the types of the intermetallic compounds. The results indicate that a thin iron-abundant intermetallic compound layer forms and ductile fracture mode occurs when Ni is added, but a thick aluminum-abundant intermetallic compound layer generates and brittle fracture mode occurs when Zn is added. So the tensile strength of the welds with Ni as filling material is greater than that with Zn as filling material. Besides, the effect of laser power on the formation of intermetallic compound layer when Ni is added was investigated. The preheated temperature field produced by laser beam in the cross section of workpiece was calculated, and the tensile strength of the joints at different laser powers was tested. Results show that only when suitable laser power is adopted, can suitable preheating temperature of the steel reach, then can thin intermetallic compound layer form and high tensile strength of the joints reach. Either excessive or insufficient laser power will reduce the tensile strength of the joints.

  11. Long non-coding RNA SNHG14 promotes microglia activation by regulating miR-145-5p/PLA2G4A in cerebral infarction.

    Science.gov (United States)

    Qi, Xu; Shao, Ming; Sun, Hongjing; Shen, Yue; Meng, Delong; Huo, Wei

    2017-04-21

    Activated microglia cells (MCs) are able to release a large amount of inflammatory cytokines after ischemic stroke, which exacerbates neuron damage. In this study, we explored the functional involvement of long non-coding RNA (lncRNA) SNHG14 and its potential regulatory mechanism in the activation of MCs. The mouse model of middle cerebral artery occlusion (MCAO) and microglia cell model of oxygen/glucose deprivation (OGD) were made. The expression of SNHG14, miR-145-5p and PLA2G4A protein expression was determined by quantitative real time PCR and western blot, respectively. Dual-luciferase assay was used to verify the direct binding of miR-145-5p and PLA2G4A. Flow cytometry was applied to measure neurons' apoptosis. SNHG14 highly expressed in ischemic cerebral tissues and BV-2 cells after OGD treatment. SNHG14 knockdown could remarkably inhibit BV-2 cells activation induced by OGD; while SNHG14 overexpression significantly promoted BV-2 cells activation, showing an increase of TNF-α and NO production and neurons' apoptosis rate. Additionally, SNHG14 knockdown promoted the expression of miR-145-5p and reduced PLA2G4A. Contrarily, SNHG14 overexpression inhibited miR-145-5p expression and increased PLA2G4A. Moreover, miR-145-5p overexpression also reversed the effect of OGD on BV-2 cells activation. Bioinformatics analysis and dual-luciferase assay supported that SNHG14 could bind directly to miR-145-5p and miR-145-5p-binding site was existed on 3'-UTR of PLA2G4A. MiR-145-5p mimic reversed the increase of PLA2G4A and reduced the high levels of TNF-α and NO in BV-2 cells induced by SNHG14 overexpression. SNHG14 increased the expression of PLA2G4A by inhibition of miR-145-5p, which resulted in the activation of MCs in cerebral infarction.

  12. Functional interaction between herpes simplex virus type 2 gD and HVEM transiently dampens local chemokine production after murine mucosal infection.

    Directory of Open Access Journals (Sweden)

    Miri Yoon

    Full Text Available Herpes virus entry mediator (HVEM is one of two principal receptors mediating herpes simplex virus (HSV entry into murine and human cells. It functions naturally as an immune signaling co-receptor, and may participate in enhancing or repressing immune responses depending on the natural ligand used. To investigate whether engagement of HVEM by HSV affects the in vivo response to HSV infection, we generated recombinants of HSV-2(333 that expressed wild-type gD (HSV-2/gD or mutant gD able to bind to nectin-1 (the other principal entry receptor but not HVEM. Replication kinetics and yields of the recombinant strains on Vero cells were indistinguishable from those of wild-type HSV-2(333. After intravaginal inoculation with mutant or wild-type virus, adult female C57BL/6 mice developed vaginal lesions and mortality in similar proportions, and mucosal viral titers were similar or lower for mutant strains at different times. Relative to HSV-2/gD, percentages of HSV-specific CD8(+ T-cells were similar or only slightly reduced after infection with the mutant strain HSV-2/gD-Δ7-15, in all tissues up to 9 days after infection. Levels of HSV-specific CD4(+ T-cells five days after infection also did not differ after infection with either strain. Levels of the cytokine IL-6 and of the chemokines CXCL9, CXCL10, and CCL4 were significantly lower in vaginal washes one day after infection with HSV-2/gD compared with HSV-2/gD-Δ7-15. We conclude that the interaction of HSV gD with HVEM may alter early innate events in the murine immune response to infection, without significantly affecting acute mortality, morbidity, or initial T-cell responses after lethal challenge.

  13. Catalytic performance of functionalized polyurethane foam on the reductive decolorization of Reactive Red K-2G in up-flow anaerobic reactor under saline conditions.

    Science.gov (United States)

    Zhou, Yang; Lu, Hong; Wang, Jing; Li, Jianan; Zhou, Jiti; Jin, Ruofei

    2015-01-01

    Soluble anthraquinone compounds including anthraquinone-2-sulfonate (AQS) and anthraquinone-2,6-disulfonate can accelerate anaerobic decolorization of azo dyes. To realize the application of these compounds, the catalytic performance and stability of AQS-modified polyurethane foam (AQS-PUF) for Reactive Red K-2G decolorization were investigated in an up-flow anaerobic bioreactor under saline conditions. The results showed that the optimal influent pH value and hydraulic retention time were 7 and 10 h, respectively, in a continuous-flow bioreactor amended with AQS-PUF (R1). Under the above conditions, R1 (93.8 % color removal) displayed better decolorization performance than the bioreactor amended with PUF (R2, 64 % color removal) in 10 days, when influent K-2G concentration was 50 mg/L. Moreover, compared with R2, R1 could more effectively cope with 50-400 mg/L K-2G and exhibited better stability with over 85 % color removal efficiency within 75 days. Further bacterial community analysis using polymerase chain reaction-denaturing gradient gel electrophoresis showed that AQS-reducing bacteria played an important role in accelerating K-2G decolorization in R1. Extracellular polymeric substances analysis found that biofilm formed on AQS-PUF had very limited negative effects on K-2G decolorization. The catalytic performance of used AQS-PUF only decreased less than 9 % in batch experiments. These findings indicate that AQS-PUF has potential application for the treatment of azo dye-containing wastewater.

  14. HIV-1 envelope glycoprotein resistance to monoclonal antibody 2G12 is subject-specific and context-dependent in macaques and humans.

    Directory of Open Access Journals (Sweden)

    Delphine C Malherbe

    Full Text Available HIV-1 Envelope (Env protein is the sole target of neutralizing antibodies (NAbs that arise during infection to neutralize autologous variants. Under this immune pressure, HIV escape variants are continuously selected and over the course of infection Env becomes more neutralization resistant. Many common alterations are known to affect sensitivity to NAbs, including residues encoding potential N-linked glycosylation sites (PNGS. Knowledge of Env motifs associated with neutralization resistance is valuable for the design of an effective Env-based vaccine so we characterized Envs isolated longitudinally from a SHIV(SF162P4 infected macaque for sensitivity to neutralizing monoclonal antibodies (MAbs B12, 2G12, 4E10 and 2F5. The early Env, isolated from plasma at day 56 after infection, was the most sensitive and the late Env, from day 670, was the most resistant to MAbs. We identified four PNGS in these Envs that accumulated over time at positions 130, 139, 160 and 397. We determined that removal of these PNGS significantly increased neutralization sensitivity to 2G12, and conversely, we identified mutations by in silico analyses that contributed resistance to 2G12 neutralization. In order to expand our understanding of these PNGS, we analyzed Envs from clade B HIV-infected human subjects and identified additional glycan and amino acid changes that could affect neutralization by 2G12 in a context-dependent manner. Taken together, these in vitro and in silico analyses of clade B Envs revealed that 2G12 resistance is achieved by previously unrecognized PNGS substitutions in a context-dependent manner and by subject-specific pathways.

  15. PLA2G6基因纯合突变致婴儿神经轴索营养不良一例%A novel homozygous mutation in PLA2G6 gene causes infantile neuroaxonal dystrophy in a case

    Institute of Scientific and Technical Information of China (English)

    王金玲; 吴蔚; 陈雪峰; 张黎; 王秀敏; 董关萍

    2016-01-01

    目的 对1例临床诊断为婴儿神经轴索营养不良的患儿的临床特点及PLA2G6基因序列进行分析.方法 收集患儿的临床资料,采集患儿及其父母的外周血DNA,用直接测序法分析PLA2G6基因的潜在突变.结果 患儿表现为进行性智力、运动功能倒退,肌张力下降.基因测序显示PLA2G6基因纯合突变G68A(Arg23Gln),其父母该位点均为杂合突变.结论 该患儿神经轴索营养不良的病因为PLA2G6基因纯合突变G68A(Arg23Gln).%Objective To investigate the clinical symptoms and potential mutations in the PLA2G6 gene for a child with infantile neuroaxonal dystrophy.Methods Clinical data of the patient was collected.The coding regions of PLA2G6 gene was subjected to Sanger sequencing using blood DNA from the patient and her parents.Results The patient has presented with psychomotor regression and hypotonia,followed by development of tetraparesis.A novel homozygous mutation G68A in the PLA2G6 gene was found by DNA sequencing,while her parents were both heterozygous carriers.Conclusion The psychomotor regression and tetraparesis of the patient was caused by infantile neuroaxonal dystrophy due to a novel homozygous mutation in the PLA2G6 gene,which was inherited from her parents.

  16. Research of Charging(Discharging Orderly and Optimizing Load Curve for Electric Vehicles Based on Dynamic Electric Price and V2G

    Directory of Open Access Journals (Sweden)

    Yang Shuai

    2016-01-01

    Full Text Available Firstly, using the Monte Carlo method and simulation analysis, this paper builds models for the behaviour of electric vehicles, the conventional charging model and the fast charging model. Secondly, this paper studies the impact that the number of electric vehicles which get access to power grid has on the daily load curve. Then, the paper put forwards a dynamic pricing mechanism of electricity, and studies how this dynamic pricing mechanism guides the electric vehicles to charge orderly. Last but not the least, the paper presents a V2G mechanism. Under this mechanism, electric vehicles can charge orderly and take part in the peak shaving. Research finds that massive electric vehicles’ access to the power grid will increase the peak-valley difference of daily load curve. Dynamic pricing mechanism and V2G mechanism can effectively lead the electric vehicles to take part in peak-shaving, and optimize the daily load curve.

  17. The 1.7 Å resolution structure of At2g44920, a pentapeptide-repeat protein in the thylakoid lumen of Arabidopsis thaliana

    Energy Technology Data Exchange (ETDEWEB)

    Ni, Shuisong; McGookey, Michael E.; Tinch, Stuart L.; Jones, Alisha N.; Jayaraman, Seetharaman; Tong, Liang; Kennedy, Michael A. (Miami U); (Columbia)

    2012-01-09

    At2g44920 belongs to a diverse family (Pfam PF00805) of pentapeptide-repeat proteins (PRPs) that are present in all known organisms except yeast. PRPs contain at least eight tandem-repeating sequences of five amino acids with an approximate consensus sequence (STAV)(D/N)(L/F)(S/T/R)(X). Recent crystal structures show that PRPs adopt a highly regular four-sided right-handed {beta}-helical structure consisting mainly of type II and type IV {beta}-turns, sometimes referred to as a repeated five-residue (or Rfr) fold. Among sequenced genomes, PRP genes are most abundant in cyanobacteria, leading to speculation that PRPs play an important role in the unique lifestyle of photosynthetic cyanobacteria. Despite the recent structural characterization of several cyanobacterial PRPs, most of their functions remain unknown. Plants, whose chloroplasts are of cyanobacterial origin, have only four PRP genes in their genomes. At2g44920 is one of three PRPs located in the thylakoid lumen. Here, the crystal structure of a double methionine mutant of residues 81-224 of At2g44920, the naturally processed fragment of one of its full-length isoforms, is reported at 1.7 {angstrom} resolution. The structure of At2g44920 consists of the characteristic Rfr fold with five uninterrupted coils made up of 25 pentapeptide repeats and {alpha}-helical elements capping both termini. A disulfide bridge links the two {alpha}-helices with a conserved loop between the helical elements at its C-terminus. This structure represents the first structure of a PRP protein whose subcellular location has been experimentally confirmed to be the thylakoid lumen in a plant species.

  18. Novel PLA2G6 mutations associated with an exonic deletion due to non-allelic homologous recombination in a patient with infantile neuroaxonal dystrophy

    Science.gov (United States)

    Yamamoto, Toshiyuki; Shimojima, Keiko; Shibata, Takashi; Akiyama, Mari; Oka, Makio; Akiyama, Tomoyuki; Yoshinaga, Harumi; Kobayashi, Katsuhiro

    2015-01-01

    Novel PLA2G6 mutations associated with p.Asp283Asn and a unique intragenic deletion of exons 4 and 5 due to non-allelic homologous recombination were identified in a Japanese female patient with typical infantile neuroaxonal dystrophy. The patient showed progressive tetraplegia beginning at 9 months. An electroencephalogram showed a diffuse increase in fast waves, and brain magnetic resonance imaging showed progressive brain atrophy and T2 hypointensity in the globus pallidus. PMID:27081553

  19. Blood pressure, arterial stiffness and endogenous lithium clearance in relation to AGTR1 A1166C and AGTR2 G1675A gene polymorphisms.

    Science.gov (United States)

    Cwynar, Marcin; Gąsowski, Jerzy; Głuszewska, Anna; Królczyk, Jarosław; Bartoń, Henryk; Słowik, Agnieszka; Grodzicki, Tomasz

    2016-01-01

    Although recently a matter of epidemiologic controversy, sodium overload and its interaction with genetic factors predispose to hypertension and related target organ complications. In 131 (66 male) treated hypertensives, we measured peripheral and central arterial pressures and pulse wave augmentation indexes (AIx(P), AIx(C1), AIx(C2)), pulse wave velocity (PWV), daily urinary sodium excretion and did genetic studies of AGTR1 A1166C and AGTR2 G1675A polymorphisms. Proximal (FE(Li)) and distal (FDR(Na)) sodium reabsorption measurements were performed using endogenous lithium clearance. In men, we found interaction between FDR(Na) and AGTR2 G1675A polymorphism with respect to AIx(C1) (p(INT)=0.01), AIx(C2) (p(INT)=0.05) and AIx(P) (p(INT)=0.006). Arterial stiffness increased with higher sodium reabsorption in the distal tubule, in the presence of AGTR2 G allele with the opposite tendency in A allele carriers. In the subgroup with FDR(Na) below median, as compared to those with FDR(Na) above median, the AIx(C1) (139.6±3.8 vs 159.1±5.7%; p=0.009), AIx(C2) (26.3±1.8 vs 33.3±1.7%; p=0.016) and AIx(P) (83.4±2.5 vs 96.5±2.6%; p<0.0001) were lower, in the G allele carrying men and GG homozygous women. The relation between sodium reabsorption in the distal tubule and the development of arterial stiffness depends on the AGTR2 G1675A polymorphism in blood pressure independent fashion. © The Author(s) 2016.

  20. Formation of complexes between PAMAM-NH2 G4 dendrimer and L-α-tryptophan and L-α-tyrosine in water

    Science.gov (United States)

    Buczkowski, Adam; Urbaniak, Pawel; Belica, Sylwia; Sekowski, Szymon; Bryszewska, Maria; Palecz, Bartlomiej

    2014-07-01

    Interactions between electromagnetic radiation and the side substituents of aromatic amino acids are widely used in the biochemical studies on proteins and their interactions with ligand molecules. That is why the aim of our study was to characterize the formation of complexes between PAMAM-NH2 G4 dendrimer and L-α-tryptophan and L-α-tyrosine in water. The number of L-α-tryptophan and L-α-tyrosine molecules attached to the macromolecule of PAMAM-NH2 G4 dendrimer and the formation constants of the supramolecular complexes formed have been determined. The macromolecule of PAMAM-NH2 G4 can reversibly attach about 25 L-α-tryptophan molecules with equilibrium constant K equal to 130 ± 30 and 24 ± 6 L-α-tyrosine molecules. This characterization was deduced on the basis of the solubility measurements of the amino acids in aqueous dendrimer solutions, the 1H NMR and 2D-NOESY measurements of the dendrimer solutions with the amino acids, the equilibrium dialysis and the circular dichroism measurements of the dendrimer aqueous solutions with L-α-tryptophan. Our date confirmed the interactions of L-α-tryptophan and L-α-tyrosine with the dendrimer in aqueous solution and indicated a reversible character of the formed complexes.

  1. Potential performance analysis and future trend prediction of electric vehicle with V2G/V2H/V2B capability

    Directory of Open Access Journals (Sweden)

    Dalong Guo

    2016-03-01

    Full Text Available Due to the intermittent nature, renewable energy sources (RES has brought new challenges on load balancing and energy dispatching to the Smart Grid. Potentially served as distributed energy storage, Electric Vehicle’s (EV battery can be used as a way to help mitigate the pressure of fluctuation brought by RES and reinforce the stability of power systems. This paper gives a comprehensive review of the current situation of EV technology and mainly emphasizing three EV discharging operations which are Vehicle to Grid (V2G, Vehicle to Home (V2H, and Vehicle to Building (V2B, respectively. When needed, EV’s battery can discharge and send its surplus energy back to power grid, residential homes, or buildings. Based on our data analysis, we argue that V2G with the largest transmission power losses is potentially less efficient compared with the other two modes. We show that the residential users have the incentive to schedule the charging, V2G, and V2H according to the real-time price (RTP and the market sell-back price. In addition, we discuss some challenges and potential risks resulting from EVs’ fast growth. Finally we propose some suggestions on future power systems and also argue that some incentives or rewards need to be provided to motivate EV owners to behave in the best interests of the overall power systems.

  2. A Dual-Wideband Double-Layer Magnetoelectric Dipole Antenna with a Modified Horned Reflector for 2G/3G/LTE Applications

    Directory of Open Access Journals (Sweden)

    Botao Feng

    2013-01-01

    Full Text Available A novel dual-wideband double-layer magnetoelectric dipole unidirectional antenna with a modified horned reflector for 2G/3G/LTE applications is proposed. Firstly, a double-layer electric dipole structure is presented to provide a dualwideband, whose folded lower layer mainly serves the lower frequency band while the inclined upper layer works for the upper frequency band. In addition, to reduce the size of the antenna and improve impedance matching, a new feeding structure designed with inverted U-shaped and tapered line is introduced. Finally, a modified horn-shaped reflector, instead of a ground plane, is employed to achieve stable and high gains. The antenna prototype can achieve a bandwidth of 24.4% (790 MHz–1010 MHz with a stable gain of 7.2 ± 0.6 dBi for the lower band, and a bandwidth of 67.3% (1.38 GHz–2.78 GHz with a gain of 7.5 ± 0.8 dBi for the upper band covering all the frequency bands for 2G/3G/LTE systems. To the best of our knowledge, it is the first double-layer magnetoelectric dipole antenna proposed. Compared with the existing ME dipole antennas, the proposed antenna, which is completely made of copper, can be easily fabricated at low cost and thus is practicable for 2G/3G/LTE applications.

  3. Development of Markov Chain-Based Queuing Model and Wireless Infrastructure for EV to Smart Meter Communication in V2G

    Science.gov (United States)

    Santoshkumar; Udaykumar, R. Y.

    2015-04-01

    The electrical vehicles (EVs) can be connected to the grid for power transaction. The vehicle-to-grid (V2G) supports the grid requirements and helps in maintaining the load demands. The grid control center (GCC), aggregator and EV are three key entities in V2G communication. The GCC sends the information about power requirements to the aggregator. The aggregator after receiving the information from the GCC sends the information to the EVs. Based on the information, the interested EV owners participate in power transaction with the grid. The aggregator facilitates the EVs by providing the parking and charging slot. In this paper the queuing model for EVs connected to the grid and development of wireless infrastructure for the EV to Smart Meter communication is proposed. The queuing model is developed and simulated. The path loss models for WiMAX are analyzed and compared. Also, the physical layer of WiMAX protocol is modeled and simulated for the EV to Smart Meter communication in V2G.

  4. Outer continental shelf program. First quarterly report, January 1--March 31, 1977. [Underwater-acoustic-data-link tests at Elephant Butte Lake in New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Denton, D.H. (ed.)

    1977-04-01

    Development work was done on a long-life, self-contained ocean bottom instrumentation and seismic measurement system. The underwater-acoustic-data-link tests were conducted at Elephant Butte Lake in southern New Mexico during 31 January through 3 February 1977. These tests were successful in demonstrating a high-data-rate acoustic transmission technique for transmission of digital data within acceptable performance specifications. The principal objective of the test was to evaluate several concepts which, when combined, should provide a reliable two-way digital data link between underwater instrumentation systems and surface receiving/recording stations. Digital data was transmitted at rates in excess of 2500 bits per second (bps) with bit/error rates less than one in one thousand. Development is in progress on a prototype sediment instrumentation package incorporating an acoustic data-transmission link and a limited set of basic sensors for operational testing in the Gulf of Mexico in July 1977. The Sandia instrumentation, data collection and transmission system for SEASWAB II has been operational since December 2, 1976. The Sandia accelerometer for bottom motion detection is transmitting motion measurements continually and analysis of data has begun at A and M. Underwater tests of the deployment of the MSP data transmission cable were successfully conducted in the Sandia hydroballistic facility in January. The new technique involves use of a high-melting-temperature wax as potting material in the cable spool. Design layout is complete on the 4'' MSP-III vehicle. This vehicle is designed for additional penetration depths to improve sediment evaluations and instrument implantation in the ocean bottom.

  5. Analysis of the geochemical gradient created by surface-groundwater interactions within riverbanks of the East River in Crested Butte, Colorado

    Science.gov (United States)

    Lunzer, J.; Williams, K. H.; Malenda, H. F.; Nararne-Sitchler, A.

    2016-12-01

    An improved understanding of the geochemical gradient created by the mixing of surface and groundwater of a river system will have considerable impact on our understanding of microorganisms, organic cycling and biogeochemical processes within these zones. In this study, the geochemical gradient in the hyporheic zone is described using a variety of geochemical properties. A system of shallow groundwater wells were installed in a series of transects along a stream bank. Each transect consists of several wells that progress away from the river bank in a perpendicular fashion. From these wells, temperature, conductivity and pH of water samples were obtained via hand pumping or bailing. These data show a clear geochemical gradient that displays a distinct zone in the subsurface where the geochemical conditions change from surface water dominated to groundwater dominated. For this study, the East River near Crested Butte, Colorado has been selected as the river of interest due the river being a relatively undisturbed floodplain. Additionally, the specific section chosen on the East River displays relatively high sinuosity meaning that these meandering sections will produce hyporheic zones that are more laterally expansive than what would be expected on a river of lower sinuosity. This increase in lateral extension of the hyporheic zone will make depicting the subtle changes in the geochemical gradient much easier than that of a river system in which the hyporheic zone is not as laterally extensive. Data has been and will be continued to be collected at different river discharges to evaluate the geochemical gradient at differing rates. Overall, this characterization of the geochemical gradient along stream banks will produce results that will aid in the further use of geochemical methods to classify and understand hyporheic exchange zones and the potential expansion of these techniques to river systems of differing geologic and geographic conditions.

  6. Analisa Pengaruh Variasi Sudut Bevel Akibat Kombinasi Pengelasan Fcaw dan SMAW terhadap Kekuatan Impact Butt Joint pada Spesimen Pipa Api 5l Grade X42

    Directory of Open Access Journals (Sweden)

    Rizkiyah Ramadani

    2017-01-01

    Full Text Available Kekuatan sambungan las pada suatu konstruksi perlu diperhatikan dengan baik dan pengujian pun perlu dilakukan untuk mengetahui ketahanan bahan terhadap suatu beban. Dalam penelitian tugas akhir ini bertujuan untuk mengetahui pengaruh sudut bevel dan kondisi optimal akibat  kombinasi pengelasan FCAW dan SMAW terhadap kekuatan impact butt joint pada material pipa API 5L grade X42. Variasi sudut bevel yang digunakan adalah 60o, 40o, dan 0o. Pengujian impact merupakan suatu upaya untuk mensimulasikan kondisi operasi material yang sering ditemui dalam perlengkapan transportasi atau konstruksi dimana beban tidak selamanya terjadi secara perlahan-lahan melainkan datang secara tiba-tiba, khususnya dalam konstruksi bangunan lepas pantai dimana beban secara tiba – tiba sangat memungkinkan untuk terjadi. Dari hasil penelitian yang dilakukan didapatkan bahwa  nilai kekuatan impact pada sudut bevel 60o di bagian weld adalah sebesar 2.01 J/mm2 dan bagian HAZ sebesar 2.08  J/mm2. Sudut bevel 40o memiliki nilai pada bagian weld sebesar 2.10 J/mm2 dan bagian HAZ sebesar 2.13  J/mm2. Namun memiliki pengaruh yang jauh berbeda dengan sudut bevel 0o yaitu memiliki nilai impact sebesar 1.72 J/mm2 untuk bagian weld dan 1.13 J/mm2 untuk bagian HAZ . Kondisi optimal pengaruh sudut bevel terhadap kekutan impact adalah sudut 40o . Hal ini dikarenakan persentase ferrite metalografi struktur mikronya lebih banyak dibandingkan dengan sudut bevel 60o dan 0o dan juga memiliki nilai kekerasan yang rendah sehingga bersifat ulet menyebabkan nilai impact-nya lebih unggul. Selain itu efisensi dalam segi penghematan waktu kerja, perkerja maupun biaya produksi lebih baik.

  7. Analysis of optical and acoustic signals in CO_2 laser butt welding%CO_2激光拼焊的光与声信号分析

    Institute of Scientific and Technical Information of China (English)

    盂宣宣; 王春明; 胡席远

    2011-01-01

    The blueviolet radiation(400-440 nm),infrared radiation(1 200-1 700 nm) and audio sound(20-20 kHz) are used as signals detected by a multi-sensor real-time monitoring system in the process of CO2 laser butt welding.The signals can be collected and recorded online.The valuable information in the signals was found out by time-domain,frequency domain and time-frequency analysis.According to the signal features,it can be concluded that the high frequency part(higher than 7 000 Hz) of the optical and acoustic signals,especially the blueviolet optical radiation signal can reflect the stability of welding pool and keyhole well,and can be used to identify the weld seam defects caused by large gap joint.%采用自行研制的多传感器激光焊接实时监测系统,以CO2激光拼焊过程中的蓝紫光辐射(400~440 nm)、红外辐射(1 200~1 700 nm)以及可听声(20~20 kHz)等三种信号作为被检测参量,进行了信号的在线采集与记录,通过时域、频域以及时频分析,实现信号中有效信息的挖掘.结果表明,7 000 Hz以上的高频段光声信号成分,尤其是蓝紫光信号,较好地反映了熔池与小孔的稳定性,可以用于识别间隙过大造成的焊缝质量问题.

  8. MABGEL 1: first phase 1 trial of the anti-HIV-1 monoclonal antibodies 2F5, 4E10 and 2G12 as a vaginal microbicide.

    Directory of Open Access Journals (Sweden)

    Georgina C Morris

    Full Text Available BACKGROUND: Monoclonal antibodies (mAbs which potently neutralize a broad range of HIV isolates are potential microbicide candidates. To date, topical application of mAbs in humans and their stability in vaginal secretions has not been studied. OBJECTIVES: To assess the pharmacokinetics and safety of the mAbs 2F5, 4E10 and 2G12 when applied vaginally in women. DESIGN: A randomized, double-blind, placebo-controlled phase 1 trial. METHODS: Twenty-eight healthy, sexually abstinent women administered 2.5 g of gel daily for 12 days containing either 10 or 20 mg/g of each mAb (MABGEL or placebo. Main clinical evaluations and sampling occurred at baseline, 1, 8, and 24 hours post-1st dose and 12 and 36 hours post-12th dose. RESULTS: After adjustment for dilution factors, median levels of 2F5, 4E10 and 2G12 in vaginal secretions at 1 hour post high-dose MABGEL were 7.74, 5.28 and 7.48 mg/ml respectively. Levels of 2F5 and 4E10 declined exponentially thereafter with similar estimated half-lives (4.6 and 4.3 hours. In contrast, 2G12 levels declined more rapidly in the first 8 hours, with an estimated half-life of 1.4 hours during this period. There was no evidence of systemic absorption. There were no significant differences in local or systemic adverse event rates or vaginal flora changes (by qPCR between active and placebo gel arms. Whilst at least 1 adverse event was recorded in 96% of participants, 95% were mild and none were serious. CONCLUSIONS: Vaginal application of 50 mg of each mAb daily was safe over a 12 day period. Median mAb concentrations detected at 8 hours post dose were potentially sufficient to block HIV transmission.2G12 exhibited more rapid elimination from the human vagina than 4E10 and 2F5, likely due to poor stability of 2G12 in acidic human vaginal secretions. Further research is needed to develop mAb-based vaginal microbicides and delivery systems. TRIAL REGISTRATION: ISRCTN 64808733 UK CRN Portfolio 6470.

  9. Geopressured-geothermal well report. Volume I. Drilling and completion

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Gladys McCall site activities are covered through the completion of the test well and salt water disposal well. The test well was drilled to a total depth of 16,510 feet, then plugged back to 15,831 feet. Three 4'' diameter diamond cores were taken for analysis. An existing well on site, the Getty-Butts Gladys McCall No. 1, was reentered and completed to a depth of 3514 feet as a salt water disposal well. The geologic interpretation of the Gladys McCall site indicated target sands for testing at 15,080 feet through 15, 831 feet. Reservoir fluid temperature at this depth is estimated to be approximately 313/sup 0/F and pressure is estimated to be +-12,800 psi. The preliminary reservoir volume estimate is 3.6 billion barrels of brine. The design wells program includes environmental monitoring of the Gladys McCall site by Louisiana State University. Field stations are set up to monitor surface and ground water quality, subsidence, land loss and shoreline erosion, and seismicity. As of December 31, 1981 the study shows no significant impact on the environment by site operations.

  10. Whole Quenching in Solution of Tri-nitrate in Water for Butt Welded High Speed Steel Tap%对焊高速钢丝锥的三硝水溶液整体淬火

    Institute of Scientific and Technical Information of China (English)

    付桂琴; 夏俊生

    2009-01-01

    由HSP15超硬高速钢刃部和45钢柄部堆焊的手工丝锥可在硬度高达48~52 HRC的超高强度钢零件上攻螺纹.这种对焊丝锥的传统热处理工艺是刃部、柄部分别处理.后采用在三硝水溶液中整体淬火的工艺处理,从而简化了工艺过程,节省了能耗,消除了淬火油烟,而且丝锥的硬度和耐磨性比按传统工艺热处理的丝锥更好.改进后的热处理工艺已成功地应用于对焊丝锥的生产.%A kind of manual taps,butt welded by edge of HSP15 superhard high speed steel with handle of 45 steel, can tap in ultra-high strength steel parts with the hardness as high as 48~52 HRC. For such butt welded taps, their edges and handles were respectively heat treated in conventional practice. Afterwards, the taps were integrally quenched into a solution of tri-nitrate in water, in this way simplifying the heat treatment process, decreasing the energy consumption and eliminating the mist during oil-quenching, with the taps providing higher hardness and wea-rability compared with the conventional heat treatment process. The improved heat treatment process has now been successfully adopted in the production of butt welded taps.

  11. The Research on Efficient Butt joint about Sunshine sports and Perpetual sports in Campus%试论高校阳光体育与终身体育的有效对接

    Institute of Scientific and Technical Information of China (English)

    张辉

    2013-01-01

      我国推行的阳光体育运动和终身体育教育理念在本质上是互融的,但二者在对接的过程中也出现了各种问题。影响它们有效对接的因素包括:(1)教师因素;(2)学生因素;(3)经费支撑因素;(4)监督因素。要确保我国阳光体育和终身体育的有效对接可以从以下4个个方面抓起:(1)调动体育教师和学生的积极性;(2)扩展阳光体育的活动内容;(3)稳定经费投入,拓宽经费来源渠道;(4)建立系统的监督检查机制。%Sunshine sports and perpetual sports are mutually soluble though there are some questions between them. The influencing factors which hinder theirs butt joint are as follows:1) the factor of teachers; 2) the factor of students; 3) the factor of supervisor. If we plan to achieve the sunshine sports and perpetual sports to butt joint efficiently, we could do from follow points:1) to redeploy the enthusiasm of teachers and students; 2) to amplify the content of the sunshine sports; 3) to build systemic supervision system. Only do like this, we could realize the efficient butt joint between the sunshine sports and perpetual sports.

  12. 肺癌患者血清中CK19-2G2和Cyfra21-1的测定及其对肺癌的诊断价值%Detection of serum CK19-2G2 and Cyfra21-1 protein and comparison of their diagnostic value for lung cancer

    Institute of Scientific and Technical Information of China (English)

    高佳; 王海; 齐军

    2008-01-01

    Objective To evaluate and compare the value of serum CK19-2G2 and Cyfra21-1 in diagnosis of lung cancer. Methods The serum concentration of CK19-2G2 and Cyfra21-1 was detected in 104 patients with lung cancer, 71 with benign lung diseases and 105 healthy volunteers. The value of the two parameters in the diagnosis of lung cancer was evaluated with ROC curve analysis. The mean level of CK19-2G2 in the three groups was compared with that of Cyfra21-1 by Mann-Whitney U test, and the correlation between these two parameters was calculated using Pearson coefficient correlation test. Results The mean serum CK19-2G2 concentration in the lung cancer group was 2.87 mU/ml, significantly higher than that in the group with benign lung diseases ( 1.02 mU/ml) and healthy volunteer group ( 0. 01 mU/ml) ( P = 0.000). The serum concentration of CK19-2G2 was positively correlated with that of Cyfra21-1, with a Pearson coefficient correlation of 0. 543. Furthermore, the mean serum CK19-2G2 level in squamous cell carcinoma group (8.35 mU/ml) was significantly higher than that in the other pathologic groups (P < 0.05). Conclusion CK19-2G2, with a higher specificity, may be a better tumor marker than CK19-2G2 in respect of specificity for non-small cell lung cancer (NSCLC), especially for squamous lung carcinoma, and deserves further study.%目的 测定肺癌患者血清中细胞角蛋白19(CK19)降解片段CK19-2G2的浓度,并评价其对肺癌的诊断价值.方法 采用CK19-2G2和Cyfr21-1的检测试剂盒,分别检测104例肺癌患者、7l例肺部炎症患者和105例健康体检者的血清标本,采用Pearson相关分析判断二者的相关性.运用受试者工作特性曲线(ROC)分析CKl9-2G2和Cyfra21-1的检测效能,并确定CK19-2G2诊断肺癌的临界值.比较CK19-2G2和Cyfra21-1诊断肺癌的灵敏度和准确率.结果 肺癌组、肺部炎症组和健康对照组血清CK19-2G2的中位浓度分别为2.87、1.02和0.01 mU/ml,肺癌组显著高于肺部炎

  13. TECHNOLOGY EVALUATION REPORT: RETECH'S PLASMA CENTRIFUGAL FURNACE - VOLUME I

    Science.gov (United States)

    A demonstration of the Retech, Inc. Plasma Centrifugal Furnace (PCF) was conducted under the Superfund Innovative Technology Evaluation (SITE) Program at the Department of Energy's (DOE's) Component Development and Integration Facility in Butte, Montana. The furnace uses heat gen...

  14. Association of COMT val158met and DRD2 G>T genetic polymorphisms with individual differences in motor learning and performance in female young adults.

    Science.gov (United States)

    Noohi, Fatemeh; Boyden, Nate B; Kwak, Youngbin; Humfleet, Jennifer; Burke, David T; Müller, Martijn L T M; Bohnen, Nico I; Seidler, Rachael D

    2014-02-01

    Individuals learn new skills at different rates. Given the involvement of corticostriatal pathways in some types of learning, variations in dopaminergic transmission may contribute to these individual differences. Genetic polymorphisms of the catechol-O-methyltransferase (COMT) enzyme and dopamine receptor D2 (DRD2) genes partially determine cortical and striatal dopamine availability, respectively. Individuals who are homozygous for the COMT methionine (met) allele show reduced cortical COMT enzymatic activity, resulting in increased dopamine levels in the prefrontal cortex as opposed to individuals who are carriers of the valine (val) allele. DRD2 G-allele homozygotes benefit from a higher striatal dopamine level compared with T-allele carriers. We hypothesized that individuals who are homozygous for COMT met and DRD2 G alleles would show higher rates of motor learning. Seventy-two young healthy females (20 ± 1.9 yr) performed a sensorimotor adaptation task and a motor sequence learning task. A nonparametric mixed model ANOVA revealed that the COMT val-val group demonstrated poorer performance in the sequence learning task compared with the met-met group and showed a learning deficit in the visuomotor adaptation task compared with both met-met and val-met groups. The DRD2 TT group showed poorer performance in the sequence learning task compared with the GT group, but there was no difference between DRD2 genotype groups in adaptation rate. Although these results did not entirely come out as one might predict based on the known contribution of corticostriatal pathways to motor sequence learning, they support the role of genetic polymorphisms of COMT val158met (rs4680) and DRD2 G>T (rs 1076560) in explaining individual differences in motor performance and motor learning, dependent on task type.

  15. Overexpression of Parkinson’s Disease-Associated Mutation LRRK2 G2019S in Mouse Forebrain Induces Behavioral Deficits and α-Synuclein Pathology

    Science.gov (United States)

    Grima, Jonathan C.; Chen, Guanxing; Swing, Debbie; Tessarollo, Lino

    2017-01-01

    Mutations in the leucine-rich repeat kinase 2 (LRRK2) gene have been identified as an unambiguous cause of late-onset, autosomal-dominant familial Parkinson’s disease (PD) and LRRK2 mutations are the strongest genetic risk factor for sporadic PD known to date. A number of transgenic mice expressing wild-type or mutant LRRK2 have been described with varying degrees of LRRK2-related abnormalities and modest pathologies. None of these studies directly addressed the role of the kinase domain in the changes observed and none of the mice present with robust features of the human disease. In an attempt to address these issues, we created a conditional LRRK2 G2019S (LRRK2 GS) mutant and a functionally negative control, LRRK2 G2019S/D1994A (LRRK2 GS/DA). Expression of LRRK2 GS or LRRK2 GS/DA was conditionally controlled using the tet-off system in which the presence of tetracycline-transactivator protein (tTA) with a CAMKIIα promoter (CAMKIIα-tTA) induced expression of TetP-LRRK2 GS or TetP-LRRK2 GS/DA in the mouse forebrain. Overexpression of LRRK2 GS in mouse forebrain induced behavioral deficits and α-synuclein pathology in a kinase-dependent manner. Similar to other genetically engineered LRRK2 GS mice, there was no significant loss of dopaminergic neurons. These mice provide an important new tool to study neurobiological changes associated with the increased kinase activity from the LRRK2 G2019S mutation, which may ultimately lead to a better understanding of not only the physiologic actions of LRRK2, but also potential pathologic actions that underlie LRRK2 GS-associated PD.

  16. 2G网络在4G时代的发展策略探讨%Discussion on Development Strategy of 2G Network in 4G Era

    Institute of Scientific and Technical Information of China (English)

    王保银; 莫冲

    2015-01-01

    4G网络建设的推进和业务的推广,使得数据业务和语音业务逐步向4G网络转移。按照这种网络发展趋势,2G网络承载的业务越来越少,直至最终消失。在此过程中,2G网络如何发展必须有一个清晰的思路:如何一边辅助4G网络的成长,一边做好原有资源的合理配置改造,如何对800M、900M频段refarming提高频谱效率。本文将结合各个运营商的2G网络的特性以及4G网络的发展方向,进行相应的发展策略探讨。%With the construction promotion and business promotion of 4G network, data services and voice services gradually shift to the 4G network. According to the development trend of the network, the business carried by 2G network will become more and less until eventually disappear. In this process, there should be a clear idea of the development of 2G network:how to assist the growth of 4G network while rationally allocating the original resources, and how to improve the efficiency of refarming the 800m and 900m frequency. This thesis discusses on the development strategy combining with the characteristics of 2G network and the de-velopment of 4G network.

  17. Effects of electromagnetic interference on the functional usage of medical equipment by 2G/3G/4G cellular phones: A revie

    Directory of Open Access Journals (Sweden)

    Periyasamy M. Mariappan

    2016-09-01

    Full Text Available There has been an increase in the potential use of wireless devices in healthcare domain for a variety of reasons. The most commonly used device is the cellular phone, which emits strong electromagnetic energy affecting thereby the functionality of the vital medical equipment such as ventilators, ECG monitors, cardiac monitors, and defibrillators. This prompted the healthcare concerns to restrict the use of these phones in the proximity of critical and non-critical care medical equipment. Due to the developments made in the design of medical equipment to comply with the EMC standards, the restriction had been slowly laid off. Still, the researchers are concerned about the electromagnetic interference with medical devices by cellular phones in the healthcare domain and recommend for conducting continuous research to study their interaction with medical equipment. This paper overviews the certain investigations carried out in the recent years to study the electromagnetic interference between medical devices and 2G/3G/4G LTE cellular phones. During the initial development of cellular phones, the 2G cellular phones had caused more interference that affects the function and operation of some medical devices. The possibility of interference from 3G cellular phones with medical devices was considerably lower than the 2G phones, but still exists. Furthermore, almost all of the 4G phones have little to no interference with the medical devices. Currently, with the development of the medical devices industry, the current medical devices are designed to operate safely under any conditions of usage. Finally, a careful analysis would require statistics on the frequency of adverse events across the healthcare system, which apparently do not exist.

  18. Effects of methylandrostenediol and a lymphostimulatory thymic factor (leucotrofin) on the reactivity of adrenal cortex of X-irradiated A2G mice

    Energy Technology Data Exchange (ETDEWEB)

    Abraham, A.D.; Rusu, V.M.; Borsa, M.; Uray, Z.; Banu, C. (Biological Research Centre, Cluj (Romania))

    1982-03-01

    Administration of methylandrostenediol alone or with Leucotrofin to whole-body irradiated A2G mice was associated with the diminuation of some enzymatic reactions in the zona fasciculata of the adrenals after 30 days on irradiation in comparison with the irradiated controls. The incorporation rate of (2-/sup 14/C)acetate into free cholesterol and glucocorticoid, de novo synthesized in the adrenals of the protected mice, was decreased compared to the untreated animals. These data showed that late irradiation damage - caused by enhanced synthesis and secretion of catabolic corticosteroids - could be prevented by administration of anabolic steroids and lymphostimulatory thymic factors, which protect the lymphoid system from lymphotoxic agents.

  19. Chemically selective formation of Si-O-Al on SiGe(110) and (001) for ALD nucleation using H2O2(g)

    Science.gov (United States)

    Park, Sang Wook; Kim, Hyonwoong; Chagarov, Evgueni; Siddiqui, Shariq; Sahu, Bhagawan; Yoshida, Naomi; Kachian, Jessica; Feenstra, Randall; Kummel, Andrew C.

    2016-10-01

    Passivation and functionalization via atomic hydrogen, hydrogen peroxide (H2O2(g)), and trimethylaluminum (TMA) on clean silicon-germanium (Si0.5Ge0.5(110) and Si0.47Ge0.53(001)) surfaces were studied and compared at the atomic level using ultra-high vacuum (UHV) scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), and X-ray photoelectron spectroscopy (XPS) to understand the topological, electronic, and chemical structures of the surfaces. STM and XPS indicate that a sputter-cleaned SiGe(110) surface is terminated with adatoms, while a SiGe(001) surface is terminated with germanium dimers. STS demonstrates that the Fermi level on a clean SiGe(110) surface is pinned near mid-gap due to surface dangling bonds, while the Fermi level on a clean SiGe(001) surface is consistent with unpinning. A saturation dose of H2O2(g) at 25 °C chemisorbs to SiGe surfaces, leaving the Fermi level at the surface consistent with unpinning, and the surface is functionalized mainly with Si-OH, Ge-OH, and Si-O-Ge bonds on both SiGe(110) and (001). After a subsequent TMA dose at 25 °C, XPS and STM verify that a thermally stable and well-ordered monolayer of Al2O3 is formed on SiGe(110) and (001) surfaces, resulting in the formation of Al-O-Si bonds. The H2O2(g) functionalization provides three times more oxygen sites on the surface and three times as great a TMA nucleation density than does H2O(g) at both 25 °C and 120 °C. STS demonstrates that H2O2(g)- and TMA-dosed SiGe surfaces show a Fermi level consistent with unpinning and a local density of states (DOS) without any states between the conduction and valence band edge, indicating an ideal template for further atomic layer deposition (ALD) nucleation of high-k materials on SiGe(110) and (001) surfaces.

  20. Ovarian volume throughout life

    DEFF Research Database (Denmark)

    Kelsey, Thomas W; Dodwell, Sarah K; Wilkinson, A Graham

    2013-01-01

    cancer. To date there is no normative model of ovarian volume throughout life. By searching the published literature for ovarian volume in healthy females, and using our own data from multiple sources (combined n=59,994) we have generated and robustly validated the first model of ovarian volume from...... to about 2.8 mL (95% CI 2.7-2.9 mL) at the menopause and smaller volumes thereafter. Our model allows us to generate normal values and ranges for ovarian volume throughout life. This is the first validated normative model of ovarian volume from conception to old age; it will be of use in the diagnosis...

  1. Modified nucleotides m2G966/m5C967 of Escherichia coli 16S rRNA are required for attenuation of tryptophan operon

    Science.gov (United States)

    Prokhorova, Irina V.; Osterman, Ilya A.; Burakovsky, Dmitry E.; Serebryakova, Marina V.; Galyamina, Maria A.; Pobeguts, Olga V.; Altukhov, Ilya; Kovalchuk, Sergey; Alexeev, Dmitry G.; Govorun, Vadim M.; Bogdanov, Alexey A.; Sergiev, Petr V.; Dontsova, Olga A.

    2013-11-01

    Ribosomes contain a number of modifications in rRNA, the function of which is unclear. Here we show - using proteomic analysis and dual fluorescence reporter in vivo assays - that m2G966 and m5C967 in 16S rRNA of Escherichia coli ribosomes are necessary for correct attenuation of tryptophan (trp) operon. Expression of trp operon is upregulated in the strain where RsmD and RsmB methyltransferases were deleted, which results in the lack of m2G966 and m5C967 modifications. The upregulation requires the trpL attenuator, but is independent of the promotor of trp operon, ribosome binding site of the trpE gene, which follows trp attenuator and even Trp codons in the trpL sequence. Suboptimal translation initiation efficiency in the rsmB/rsmD knockout strain is likely to cause a delay in translation relative to transcription which causes misregulation of attenuation control of trp operon.

  2. Modified nucleotides m(2)G966/m(5)C967 of Escherichia coli 16S rRNA are required for attenuation of tryptophan operon.

    Science.gov (United States)

    Prokhorova, Irina V; Osterman, Ilya A; Burakovsky, Dmitry E; Serebryakova, Marina V; Galyamina, Maria A; Pobeguts, Olga V; Altukhov, Ilya; Kovalchuk, Sergey; Alexeev, Dmitry G; Govorun, Vadim M; Bogdanov, Alexey A; Sergiev, Petr V; Dontsova, Olga A

    2013-11-18

    Ribosomes contain a number of modifications in rRNA, the function of which is unclear. Here we show--using proteomic analysis and dual fluorescence reporter in vivo assays--that m(2)G966 and m(5)C967 in 16S rRNA of Escherichia coli ribosomes are necessary for correct attenuation of tryptophan (trp) operon. Expression of trp operon is upregulated in the strain where RsmD and RsmB methyltransferases were deleted, which results in the lack of m(2)G966 and m(5)C967 modifications. The upregulation requires the trpL attenuator, but is independent of the promotor of trp operon, ribosome binding site of the trpE gene, which follows trp attenuator and even Trp codons in the trpL sequence. Suboptimal translation initiation efficiency in the rsmB/rsmD knockout strain is likely to cause a delay in translation relative to transcription which causes misregulation of attenuation control of trp operon.

  3. Integrable deformations of the $G_{k_1} \\times G_{k_2}/G_{k_1+k_2}$ coset CFTs arXiv

    CERN Document Server

    Sfetsos, Konstantinos

    We study the effective action for the integrable $\\lambda$-deformation of the $G_{k_1} \\times G_{k_2}/G_{k_1+k_2}$ coset CFTs. For unequal levels theses models do not fall into the general discussion of $\\lambda$-deformations of CFTs corresponding to symmetric spaces and have many attractive features. We show that the perturbation is driven by parafermion bilinears and we revisit the derivation of their algebra. We uncover a non-trivial symmetry of these models parametric space, which has not encountered before in the literature. Using field theoretical methods and the effective action we compute the exact in the deformation parameter $\\beta$-function and explicitly demonstrate the existence of a fixed point in the IR corresponding to the $G_{k_1-k_2} \\times G_{k_2}/G_{k_1}$ coset CFTs. The same result is verified using gravitational methods for $G=SU(2)$. We examine various limiting cases previously considered in the literature and found agreement.

  4. Compositional and Textural Analysis of Maar-Diatreme Volcanic Deposits at Hopi Buttes Volcanic Field (AZ) Using GigaPan Panoramic and Thermal Infrared Imagery

    Science.gov (United States)

    Lee, R.; Graettinger, A. H.; Weinell, M.; Hughes, C. G.

    2016-12-01

    Basaltic maar-diatreme volcanoes are produced when rising magma interacts with groundwater and produces a maar crater at the ground surface. This crater is underlain by a diatreme, a downward-tapering conical structure filled with a mixture of fragments of intruded magma, fractured host rock, and clasts recycled through repeated discrete subsurface explosions. The debris of the diatreme records the mixing processes caused by subsurface explosions and is the source for ejected material that forms maar tephra rings. Determining the variable depths and lateral locations of these explosions and how energy is dissipated in the subsurface is critical to understanding how maar-diatreme eruptions progress. The Hopi Buttes Volcanic Field (HBVF) in the Navajo Nation, Arizona, USA, contains several diatremes and incised tephra rings with heterolithic clasts 10 mm - 10 m in size, and are well-exposed near-vertical to vertical outcrops. Our ability to measure the length scales and distribution of textures produced by subsurface explosions in these diatremes is limited by the physical accessibility of the exposures, due to both the verticality of the outcrops and the cultural sensitivity of the site. Quantifying the number and locations of explosions is dependent on our ability to investigate the full diatreme outcrop, and not just what can be accessed through traditional field observations. We present a novel field and computer-based technique for both quantitatively and qualitatively characterizing the composition and texture of maar-diatreme deposits in vertical outcrops. This technique uses a combination of field-collected multispectral thermal infrared (TIR) image data and visible wavelength GigaPan imagery to characterize the compositional and textural variations over a whole outcrop. To increase the spatial and spectral resolution of the TIR data, a super-resolution technique will be applied. The technique provides a simple and efficient method to augment the study of the

  5. Fracture patterns at lava-ice contacts on Kokostick Butte, OR, and Mazama Ridge, Mount Rainier, WA: Implications for flow emplacement and cooling histories

    Science.gov (United States)

    Lodge, Robert W. D.; Lescinsky, David T.

    2009-09-01

    Cooling lava commonly develop polygonal joints that form equant hexagonal columns. Such fractures are formed by thermal contraction resulting in an isotropic tensional stress regime. However, certain linear cooling fracture patterns observed at some lava-ice contacts do not appear to fit the model for formation of cooling fractures and columns because of their preferred orientations. These fracture types include sheet-like (ladder-like rectangular fracture pattern), intermediate (pseudo-aligned individual column-bounding fractures), and pseudopillow (straight to arcuate fractures with perpendicular secondary fractures caused by water infiltration) fractures that form the edges of multiple columns along a single linear fracture. Despite the relatively common occurrence of these types of fractures at lava-ice contacts, their significance and mode of formation have not been fully explored. This study investigates the stress regimes responsible for producing these unique fractures and their significance for interpreting cooling histories at lava-ice contacts. Data was collected at Kokostick Butte dacite flow at South Sister, OR, and Mazama Ridge andesite flow at Mount Rainier, WA. Both of these lava flows have been interpreted as being emplaced into contact with ice and linear fracture types have been observed on their ice-contacted margins. Two different mechanisms are proposed for the formation of linear fracture networks. One possible mechanism for the formation of linear fracture patterns is marginal bulging. Melting of confining ice walls will create voids into which flowing lava can deform resulting in margin-parallel tension causing margin-perpendicular fractures. If viewed from the ice-wall, these fractures would be steeply dipping, linear fractures. Another possible mechanism for the formation of linear fracture types is gravitational settling. Pure shear during compression and settling can result in a tensional environment with similar consequences as

  6. Mean nuclear volume

    DEFF Research Database (Denmark)

    Mogensen, O.; Sørensen, Flemming Brandt; Bichel, P.

    1999-01-01

    We evaluated the following nine parameters with respect to their prognostic value in females with endometrial cancer: four stereologic parameters [mean nuclear volume (MNV), nuclear volume fraction, nuclear index and mitotic index], the immunohistochemical expression of cancer antigen (CA125...

  7. Fatigue influence for wheels position of the orthotropic steel bridge deck of U-rib butt weld%轮迹位置对钢桥面板U肋对接焊缝疲劳性能的影响

    Institute of Scientific and Technical Information of China (English)

    朱伟; 吉伯海; 傅中秋

    2015-01-01

    为研究车轮行驶位置对钢桥面板U肋对接焊缝疲劳性能的影响,现以江阴长江大桥为研究对象,采用数值模拟的方法,计算了不同车辆轮迹位置作用下U肋对接焊缝处的疲劳应力幅,结合BS5400规范得到了该细节相应位置的疲劳损伤度;建立U肋对接焊缝局部模型,模拟了不同车轮位置作用下疲劳裂纹扩展路径,同时得到了各扩展阶段的裂纹扩展参数。结果表明:车轮位置与焊缝之间距离大于600 mm,可忽略车辆位置对U肋对接焊缝开裂前的疲劳损伤累计;相对于其他部位,U 肋两侧弧形段疲劳损伤严重,易产生疲劳裂纹;随着车轮位置的改变,裂纹扩展路径逐渐由与焊缝平行向与焊缝垂直发展,车轮位置与焊缝之间距离大于750 mm,可忽略车辆位置对U肋对接焊缝开裂后的裂纹扩展影响。%In order to study the fatigue effect of the orthotropic steel bridge deck of U-rib butt weld under different wheels position, which use the numerical simulation method and as the Jiangyin Yangtze River Bridge for research object. First use the general-purpose finite element software to analysis the fatigue stress amplitude of U-rib butt welds under different wheels position, which com-bined with BS5400 standard to calculate the degree of fatigue damage for this fatigue details, and then use FRANC2 D/L software to simulate the changing rules of crack propagation path under differ-ent wheels positions. The results show that: the distance of wheels and U-rib is greater than 600 mm, it can ignore the fatigue damage cumulative to butt weld; compared to other sites, the fatigue damage of the sides of U-rib arc-shaped segment is serious, which easy to produce fatigue crack;with the change of the position of the wheels, the crack propagation path change from parallel to the butt weld to the vertical to the butt weld gradually, and while the distance of wheels and U-rib is greater than 750mm, the effect of

  8. 正交异性钢桥面板U肋对接焊缝疲劳损伤度分析∗%STUDY OF THE FATIGUE DAMAGE BEHAVIOR OF U-RIB BUTT WELDS OF ORTHOTROPIC STEEL BRIDGE DECK

    Institute of Scientific and Technical Information of China (English)

    王益逊; 吉伯海; 姚悦; 傅中秋; 朱伟

    2016-01-01

    The measuring points were set on the U⁃rib butt welds of fast lane and slow lane in a quarter⁃span of Jiangyin Yangtze River Bridge to measure the one⁃day strain process curves. The curves were filterred by MATLAB software to obtain the real strain process curves of steel box girder under the vehicle loading. The daily damage degree distribution rules of fast and slow lane were analyzed based on the rain flow method and Miner fatigue damage cumulative rule. The daily damage distribution model of U⁃rib butt welds was put forward and the fatigue life of U⁃rib butt welds was evaluated. The analysis result showed that the time when the damage peak of both kinds of lanes occurred was basically the same, yet the peak value differed a lot from each other. The peak value of the slow lane was 4. 4 times than that of the fast lane. The fitting value of fatigue life based on daily damage distribution model coincided well with that of the measured, which could be applied to practical engineerings. The design life of the bridge was superior to and 3. 7 times of the fatigue life of the U⁃rib butt in the slow lane, meaning that the fatigue life of the U⁃rib butt in the slow lane was far from demand, thus special attention should be paid to it.%分别在江阴长江大桥1/4跨截面快车道、慢车道U肋对接焊缝处布设测点,测得该桥一天的应变历程曲线。基于雨流计数法以及Miner疲劳损伤累计准则,分析快、慢车道日损伤度分布规律,并提出了该桥U肋对接焊缝部位的日损伤分布模型,最后对U肋对接焊缝处的疲劳寿命进行评估。分析结果表明,快、慢车道出现损伤峰值的时间基本一致,但各峰值大小差异性较大,慢车道损伤峰值约为快车道损伤峰值的4�4倍;根据日损伤度分布模型得出的疲劳寿命拟合值与实测值吻合良好,可以应用于实际工程;大桥设计寿命约为慢车道U肋对接焊缝实测寿命的3�7

  9. HYDRAULICS, BUTTS COUNTY, GEORGIA, USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to...

  10. ORTHOIMAGERY, BUTTS COUNTY, GA, USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Digital orthographic imagery datasets contain georeferenced images of the Earth?s surface, collected by a sensor in which object displacement has been removed for...

  11. Technical standard: Management of radioactive waste at the SRS storage/disposal facilities, 643-7G, 643-29G, 709-2G

    Energy Technology Data Exchange (ETDEWEB)

    Cook, J.R.

    1990-06-01

    This Standard applies to the storage or disposal of Low-Level Radioactive Waste and Transuranic Waste at the Savannah River Site (SRS) Radioactive Waste Storage/Disposal Facility 643-7G, and to the storage of Mixed Waste at facilities 643-29G and 709-2G. This Standard applies only to current operations. The objective for prescribing the requirements in this Standard is to provide for storage and disposal of radioactive waste at SRS in a manner that will ensure the safety and health of employees and of the public, and that will protect the environment. The Technical Standards and Operational Safety Requirements are the formal instruments for setting boundaries for administrative control of all processes.

  12. Ashkenazi Parkinson's disease patients with the LRRK2 G2019S mutation share a common founder dating from the second to fifth centuries.

    Science.gov (United States)

    Bar-Shira, Anat; Hutter, Carolyn M; Giladi, Nir; Zabetian, Cyrus P; Orr-Urtreger, Avi

    2009-10-01

    The LRRK2 G2019S mutation is a major genetic determinant of Parkinson's disease (PD) across the world that occurs at an elevated frequency in Ashkenazi Jews. We determined the LRRK2 haplotypes in 77 G2019S carriers, mostly Ashkenazi Jews, and in 50 noncarrier Ashkenazi PD patients, using 16 genetic markers. A single haplotype was detected in all mutation carriers, indicating that these individuals share a common founder. Using a maximum-likelihood method, we estimate that Ashkenazi Jews with G2019S share a common ancestor who lived approximately 1,830 (95% CI 1,560-2,160) years ago, around the second century, after the second Jewish Diaspora.

  13. Systematical shell-model calculation in the pairing-plus-multipole Hamiltonian with a monopole interaction for the pf5/2g9/2 shell

    CERN Document Server

    Kaneko, K; Sun, Y; Tazaki, S

    2015-01-01

    The recently-proposed effective shell-model interaction, the pairing-plus-multipole Hamiltonian with the monopole interaction obtained by empirical fits starting from the monopole-based universal force (PMMU), is systematically applied to nuclei of the pf5/2g9/2 shell region. It is demonstrated that the calculation describes reasonably well a wide range of experimental data, including not only the low-lying and high-excitation spectra, E2 transitions, quadrupole moments, and magnetic moments, but also the binding energies, for Ni, Cu, Zn, Ga, Ge, As, and Se isotopes with A=64-80. In particular, a structure of the neutron-rich Ge and Se isotopes is discussed in detail.

  14. Induction of type I interferon by high-molecular poly-γ-glutamate protects B6.A2G-Mx1 mice against influenza A virus.

    Science.gov (United States)

    Moon, Ho-Jin; Lee, Jong-Soo; Choi, Young-Ki; Park, Jie-Yeun; Talactac, Melbourne R; Chowdhury, Mohammed Y E; Poo, Haryoung; Sung, Moon-Hee; Lee, Ji-Hoon; Jung, Jae U; Kim, Chul-Joong

    2012-04-01

    In addition to development of vaccines and synthetic antiviral drugs, recent studies have advocated the use of natural substances that inhibit or prevent viral infections. High-molecular-weight poly-γ-glutamate (HM-γ-PGA) produced by Bacillus subtilis chungkookjang was evaluated for anti-influenza virus activity. HM-γ-PGA induced type I interferons (IFNs), which in turn stimulated expression of Myxovirus resistant 1 protein and IFN-related proteins in vitro. In the B6.A2G-Mx1 mouse model, which mimics the innate immune system of humans, treatment with HM-γ-PGA enhanced the antiviral state of mice and protected them against highly pathogenic influenza A virus. Naturally synthesized HM-γ-PGA has potent anti-influenza activity and may be a useful means for control of influenza virus.

  15. Novel series of potent, nonsteroidal, selective androgen receptor modulators based on 7H-[1,4]oxazino[3,2-g]quinolin-7-ones.

    Science.gov (United States)

    Higuchi, Robert I; Arienti, Kristen L; López, Francisco J; Mani, Neelakhanda S; Mais, Dale E; Caferro, Thomas R; Long, Yun Oliver; Jones, Todd K; Edwards, James P; Zhi, Lin; Schrader, William T; Negro-Vilar, Andrés; Marschke, Keith B

    2007-05-17

    Recent interest in orally available androgens has fueled the search for new androgens for use in hormone replacement therapy and as anabolic agents. In pursuit of this, we have discovered a series of novel androgen receptor modulators derived from 7H-[1,4]oxazino[3,2-g]quinolin-7-ones. These compounds were synthesized and evaluated in competitive binding assays and an androgen receptor transcriptional activation assay. A number of compounds from the series demonstrated single-digit nanomolar agonist activity in vitro. In addition, lead compound (R)-16e was orally active in established rodent models that measure androgenic and anabolic properties of these agents. In this assay, (R)-16e demonstrated full efficacy in muscle and only partially stimulated the prostate at 100 mg/kg. These data suggest that these compounds may be utilized as selective androgen receptor modulators or SARMs. This series represents a novel class of compounds for use in androgen replacement therapy.

  16. Regeneration of eye tissues is modulated by altered levels of gravity at 1g, 2g, and in microgravity during spaceflight

    Science.gov (United States)

    Grigoryan, Eleonora; Almeida, Eduardo; Mitashov, Victor

    The pursuit of human space exploration requires detailed knowledge of microgravity-related changes in fundamental biological processes, and their effects on health. Normal regeneration of organs and tissues is one such fundamental process that allows maintenance of vitality and function of living organisms. Animal models of tissue regeneration include the newt (Pleurodeles waltl, Urodela) eye, which has been extensively used by our team in Russian Bion and Foton microgravity experiments since 1985, and in recent NASA 2.5 meter diameter centrifuge hypergravity experiments. In total, these experiments allow us to draw several broad conclusions: Newt lens regeneration is significantly altered in microgravity and hypergravity relative to 1g controls. Lenses formed in microgravity are larger and more developed than those regenerated in 1g controls; Microgravity alterations of lens regeneration can persist after spaceflight, and continue to affect repeated removal and regeneration of the lens after return to 1g; Microgravity increases the numbers of early stage regenerative proliferating BrdU-labeled cells in dorsal iris progenitors and in the lens regenerate. Regeneration under hypergravity conditions at 2g inhibits lens regeneration, and often causes retinal detachment. Molecular mechanisms regulating lens regeneration rate include FGF2 signaling, (a key pathway for eye tissue development and regeneration), and an expression of stress-related proteins - HSPs. In conclusion, regeneration of lens and other eye tissues in the newt is sensitive to, and regulated by the level of gravity mechanotransduction and developmental signaling pathways, with microgravity favoring stem cell progenitor proliferation, and gravity at 1g promoting terminal differentiation, while hypergravity at 2g often causes damage of delicate regenerating tissues.

  17. Preparation of TiO2/activated carbon with Fe ions doping photocatalyst and its application to photocatalytic degradation of reactive brilliant red K2G

    Institute of Scientific and Technical Information of China (English)

    LI YouJi; LI Jing; MA MingYuan; OUYANG YuZhu; YAN WenBin

    2009-01-01

    Titanium dioxide coated on activated carbon(AC)with Fe ions doping(Fe-TiO2/AC)composite was prepared by an improved sol-gel method.The photocatalytic activities were tested by photocatalytic degradation of reactive brilliant red K2G in solution.The results show that in comparison with the agglomeration of pure TiO2,the TiO2 nanoparticles are well dispersed in the AC matrix,of which sizes are decreased with Fe ions doping.Additionally,the iron species on TiO2 of composite are Fe2O3 and FeO,which do not affect the crystalline structures of TiO2 nanopanicles.The AC matrix and iron doping content influence the fluorescence intensity of composite due to their effects on recombination prob ability of hole-electron paire.Compared with TiO2,0.3%Fe-TiO2,TiO2/AC,0.5% Fe-TiO2/AC and 0.1% Fe-TiO2/AC,the 0.3%Fe-TiO2/AC shows the highest photoactivity with the complete mineralization of K2G for finite time due to the optimum Fe ions content and AC matrix.Furthermore,the kinetic constant(K=0.0229 min-1)of 0.3% Fe-TiO2/AC composite is more than the sum of both TiO2/AC(0.0154 min-1)and 0.3% Fe-TiO2(0.0057 min-1)because coexistence of the AC end Fe ions has an enlarging effect on improving the photoactivity of TiO2.

  18. Preparation of TiO2/activated carbon with Fe ions doping photocatalyst and its application to photocatalytic degradation of reactive brilliant red K2G

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Titanium dioxide coated on activated carbon(AC) with Fe ions doping(Fe-TiO2/AC) composite was prepared by an improved sol-gel method.The photocatalytic activities were tested by photocatalytic degradation of reactive brilliant red K2G in solution.The results show that in comparison with the agglomeration of pure TiO2,the TiO2 nanoparticles are well dispersed in the AC matrix,of which sizes are decreased with Fe ions doping.Additionally,the iron species on TiO2 of composite are Fe2O3 and FeO,which do not affect the crystalline structures of TiO2 nanoparticles.The AC matrix and iron doping content influence the fluorescence intensity of composite due to their effects on recombination probability of hole-electron pairs.Compared with TiO2,0.3% Fe-TiO2,TiO2/AC,0.5% Fe-TiO2/AC and 0.1% Fe-TiO2/AC,the 0.3% Fe-TiO2/AC shows the highest photoactivity with the complete mineralization of K2G for finite time due to the optimum Fe ions content and AC matrix.Furthermore,the kinetic constant(k=0.0229 min-1) of 0.3% Fe-TiO2/AC composite is more than the sum of both TiO2/AC(0.0154 min-1) and 0.3% Fe-TiO2(0.0057 min-1) because coexistence of the AC and Fe ions has an enlarging effect on improving the photoactivity of TiO2.

  19. Microwave-Assisted Synthesis of Arene Ru(II Complexes Induce Tumor Cell Apoptosis Through Selectively Binding and Stabilizing bcl-2 G-Quadruplex DNA

    Directory of Open Access Journals (Sweden)

    Yanhua Chen

    2016-05-01

    Full Text Available A series of arene Ru(II complexes coordinated with phenanthroimidazole derivatives, [(η6-C6H6Ru(lCl]Cl(1b L = p-ClPIP = 2-(4-Chlorophenylimidazole[4,5f] 1,10-phenanthroline; 2b L = m-ClPIP = 2-(3-Chlorophenylimidazole[4,5f] 1,10-phenanthroline; 3b L = p-NPIP = 2-(4-Nitrophenylimidazole[4,5f] 1,10-phenanthroline; 4b L = m-NPIP = 2-(3-Nitrophenyl imidazole [4,5f] 1,10-phenanthroline were synthesized in yields of 89.9%–92.7% under conditions of microwave irradiation heating for 30 min to liberate four arene Ru(II complexes (1b, 2b, 3b, 4b. The anti-tumor activity of 1b against various tumor cells was evaluated by MTT assay. The results indicated that this complex blocked the growth of human lung adenocarcinoma A549 cells with an IC50 of 16.59 μM. Flow cytometric analysis showed that apoptosis of A549 cells was observed following treatment with 1b. Furthermore, the in vitro DNA-binding behaviors that were confirmed by spectroscopy indicated that 1b could selectively bind and stabilize bcl-2 G-quadruplex DNA to induce apoptosis of A549 cells. Therefore, the synthesized 1b has impressive bcl-2 G-quadruplex DNA-binding and stabilizing activities with potential applications in cancer chemotherapy.

  20. Persistence of Vectobac WDG and Metoprag S-2G against Aedes aegypti larvae using a semi-field bioassay in Rio de Janeiro, Brazil Persistência de Vectobac WDG e Metoprag S-2g contra larvas de Aedes aegypti em ensaio simulado de campo no Rio de Janeiro, Brasil

    Directory of Open Access Journals (Sweden)

    José Bento Pereira Lima

    2005-02-01

    Full Text Available Persistence of Bacillus thuringiensis var. israelensis (Vectobac WDG and methoprene (Metoprag S-2G was evaluated against Aedes aegypti late third instar larvae of the Rockefeller strain in a semi-field bioassay. Tests were performed in Rio de Janeiro, using containers made of plastic, iron, concrete and asbestos, placed in a shaded area. The formulations used were 0.2 g of Vectobac-WDG and 1g of Metoprag S-2G per 100 liters of water in house storage containers. Vectobac WDG was tested twice, in March and in April/May, 2002. In March (temperature ranging from 21.5 to 39.3 ºC, 70-100% mortality was observed by the 7th day and declined abruptly thereafter. No significant differences were observed among the container types. In April/May (18.6 to 34.8 ºC mortality was higher than 70% to 30-36 days in all cases, except in the iron container (40% mortality on the 12th day. Metoprag S-2G was evaluated in April/May, 2002, and induced mortality higher than 70% up to 15 days in the plastic and iron containers and only seven days in the concrete container. In the asbestos container, maximal mortality was achieved on day one post-treatment (66%. Our results point to a low persistence of both formulations in the weather conditions of Rio de Janeiro.A persistência de Bacillus thuringiensis var. israelensis (Vectobac WDG e de Metoprene (Metoprag S-2G contra larvas de terceiro estadio de Aedes aegypti (linhagem Rockefeller foi avaliada em ensaios simulados de campo. Os testes foram realizados no Rio de Janeiro, em recipientes domésticos para estoque de água de plástico, ferro, cimento ou amianto, instalados em área sombreada. As formulações foram usadas nas concentrações de 0.2g / 100 l (Vectobac-WDG e 1g / 100 l (Metoprag S-2G. Vectobac WDG foi submetido a dois testes, em março e abril/maio, 2002. Em março (temperaturas entre 21.5 e 39.3 ºC, 70-100% de mortalidade foi observada no sétimo dia, declinando posteriormente. Não houve diferen

  1. Simulation of a transient with loss of primary coolant due to a small rupture in Angra 2 nuclear power plant with RELAP5/MOD3.2.2G code; Simulacao de um acidente postulado de perda de refrigerante primario por pequena ruptura na usina de Angra 2 com o codigo RELAP5/MOD3.2.2G

    Energy Technology Data Exchange (ETDEWEB)

    Sabundjian, Gaiane; Andrade, Delvonei Alves de [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    2002-07-01

    This paper presents a nodalization for Angra 2 Nuclear Power Plant, as well as the results obtained for a Small Break Loss of Coolant Accident (SBLOCA), simulated with RELAP5/MOD3.2G code. This accident consists in a small break (380 m{sup 2}) in the line of the Emergency Core Coolant System (ECCS) in loop 20 of Angra 2. Results are not as expected, however they are satisfactory regarding the nodalization used. (author)

  2. The Hydrogeologic Character of the Lower Tuff Confining Unit and the Oak Springs Butte Confining Unit in the Tuff Pile Area of Central Yucca Flat

    Energy Technology Data Exchange (ETDEWEB)

    Drellack, Jr., Sigmund L.; Prothro, Lance B.; Gonzales, Jose L.; Mercadante, Jennifer M.

    2010-07-30

    , 2006). • No welded-tuff (or lava-flow aquifers), referred to as low-porosity, high-permeability zones in Boryta et al. (in review), are present within the LTCU in the Tuff Pile area. • Fractures within the LTCU are poorly developed, a characteristic of zeolitic tuffs; and fracture distributions are independent of stratigraphic and lithologic units (Prothro, 2008). • Groundwater flow and radionuclide transport will not be affected by laterally extensive zones of significantly higher permeability within the LTCU in the Tuff Pile area. Although not the primary focus of this report, the hydrogeologic character of the Oak Spring Butte confining unit (OSBCU), located directly below the LTCU, is also discussed. The OSBCU is lithologically more diverse, and does include nonwelded to partially welded ash-flow tuffs. However, these older ash-flow tuffs are poorly welded and altered (zeolitic to quartzofeldspathic), and consequently, would tend to have properties similar to a tuff confining unit rather than a welded-tuff aquifer.

  3. Volume Regulated Channels

    DEFF Research Database (Denmark)

    Klausen, Thomas Kjær

    - serves a multitude of functions in the mammalian cell, regulating the membrane potential (Em), cell volume, protein activity and the driving force for facilitated transporters giving Cl- and Cl- channels a major potential of regulating cellular function. These functions include control of the cell cycle...... of volume perturbations evolution have developed system of channels and transporters to tightly control volume homeostasis. In the past decades evidence has been mounting, that the importance of these volume regulated channels and transporters are not restricted to the defense of cellular volume......, controlled cell death and cellular migration. Volume regulatory mechanisms has long been in focus for regulating cellular proliferation and my thesis work have been focusing on the role of Cl- channels in proliferation with specific emphasis on ICl, swell. Pharmacological blockage of the ubiquitously...

  4. Research on Stress Intensity Factors for Weld Root Crack of T-butt Joints%T形焊接接头根部裂纹应力强度因子研究

    Institute of Scientific and Technical Information of China (English)

    宋占勋; 方少轩; 谢基龙

    2013-01-01

    Stress intensity factors (SIFs) for weld root crack of T-butt joints are researched. Semi-ellipse crack models for weld root of T-butt joints are built with finite model. Geometric parameters and boundary conditions are established according to finite model. Singular element method is used to simulate stress singularity of crack tip with finite element calculation. Element size of crack tip is obtained by convergence experiment. Calculation results show that, SIFs of crack tip have regularity for different initial crack size under same load, and the importance of different geometric parameters affect SIF is different. Therefore, some geometric parameters must be focused on fatigue research for weld root of T-butt joint. The simulation results are fitted by multiple linear regression method. These results could provide a valuable reference for further research of crack propagation and fatigue life prediction.%建立T形焊接接头根部裂纹的半椭圆裂纹模型,定义裂纹模型的构形参数以及边界条件,分析裂纹尖端的应力强度因子.采用奇异单元法,通过有限元计算,模拟裂纹尖端的应力奇异性.并通过收敛性检验确定裂纹尖端的单元尺寸.在此基础上,计算裂纹尖端量纲一应力强度因子,并分析其受几何参数影响的变化规律.计算结果表明,对于给定的载荷条件下,不同初始裂纹尺寸时,裂纹尖端的应力强度因子存在一定的规律性,且不同几何参数对应力强度因子的影响程度存在一定差异,因此,对焊接结构疲劳强度研究时需要有一定的侧重点.采用多重线性回归方法拟合仿真计算结果,这些结果为进一步研究T形焊接接头根部裂纹扩展和疲劳寿命预测提供参考.

  5. Fatigue Life Study of U-rib Butt Weld of Steel Bridge Deck%钢桥面板U肋对接焊缝疲劳寿命研究

    Institute of Scientific and Technical Information of China (English)

    王益逊; 傅中秋; 孙童; 徐捷; 朱伟

    2016-01-01

    以江阴长江大桥为研究对象,建立正交异性钢桥面板局部有限元模型,计算各种标准疲劳车作用下U肋对接焊缝处的疲劳应力幅,结合BS5400规范得到该细节相应位置的疲劳损伤度;建立车辆轮迹分布模型,将影响疲劳损伤的各参数矩阵化,根据实桥车流模拟结果,提出一种考虑轮迹改变的疲劳损伤计算方法。结果表明,U 肋对接焊缝腹板处的损伤相对较小,靠近顶板部位、腹板与底板交接部位,以及U肋底部的损伤较为严重;考虑车辆轮迹改变后的疲劳寿命与实测结果吻合度较高,因此考虑车辆轮迹位置的改变可以提高寿命评估的精确度。%The Jiangyin Yangtze River Bridge is studied in this paper .The local finite element model of orthotropic steel bridge deck is established .The fatigue stress amplitude of U‐rib butt weld under all kinds of standard vehicle loads is calculated and thus the fatigue damage degree of a certain position is obtained according to the specification BS5400 .Then ,the vehicle wheelmark distribution model is built up .By matrixing all parameters that affect the fatigue damage and considering w heelmark chan‐ges ,a fatigue damage calculation method is proposed based on the simulation results of traffic flow . The results show that the damage of U‐rib web butt weld is relatively less while that near the roof ,of web‐floor joint and of U‐rib floor is more serious .In addition ,the fatigue life of U‐rib butt weld by considering wheelmark changes matches well with the measured results .Therefore ,the accuracy of fatigue assessment could be improved by considering w heelmark changes in the calculation of fatigue lif e .

  6. Precision volume measurement system.

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Erin E.; Shugard, Andrew D.

    2004-11-01

    A new precision volume measurement system based on a Kansas City Plant (KCP) design was built to support the volume measurement needs of the Gas Transfer Systems (GTS) department at Sandia National Labs (SNL) in California. An engineering study was undertaken to verify or refute KCP's claims of 0.5% accuracy. The study assesses the accuracy and precision of the system. The system uses the ideal gas law and precise pressure measurements (of low-pressure helium) in a temperature and computer controlled environment to ratio a known volume to an unknown volume.

  7. Promoter polymorphism MMP-1 (-1607 2G/1G) and MMP-3 (-1612 5A/6A) in development of HAND and modulation of pathogenesis of HAND

    Indian Academy of Sciences (India)

    HARI OM SINGH; SHRUTI D MARATHE; SUMITRA NAIN; DHARMESH SAMANI; VIJAY NEMA; MANISHAV GHATE; R R GANGAKHEDKAR

    2017-09-01

    The pathogenesis of HIV-associated neurocognitive disorder (HAND) is modulated by host genetic susceptibility factorssuch as Matrix metalloproteinases (MMPs). Promoter polymorphism of MMP-1 and MMP-3 may modify the expression ofthe gene. Hence, we evaluated the association of MMP-1-16072G/1G and MMP-3-1612 5A/6A polymorphisms withdevelopment of HAND and the modulation of pathogenesis of HAND. We enrolled a total of 180 individuals, 50 HIVinfectedindividuals with HAND, 130 without HAND, and 150 healthy controls. Polymorphism of MMP-1 and MMP-3were genotyped by PCR-RFLP. MMP-1-1607 2G1G, -16071G/2G-1G/1G genotypes and -1607 1G allele were associatedwith the development of HAND (OR = 1.64, P = 0.05; OR = 1.45, P = 0.04; OR = 1.69, P = 0.05). MMP-1-16071G1G, MMP-3-16125A5A genotypes increased the risk for the development of HAND (OR = 1.78, P = 0.25;OR = 2.39, P = 0.13). MMP-3-1612 5A5A, -1612 6A/5A-5A/5A genotypes and -1612 5A allele were associated with thereduced risk of HAND (OR = 0.40, P = 0.05; OR = 0.53, P = 0.04; OR = 0.40, P = 0.01). Haplotype 5A1G increasedthe risk of development of HAND (OR = 1.93, P = 0.05). As observed in advanced HIV disease stage, MMP-1-16071G1G genotype enhance the risk for advancement of HIV disease (OR = 1.69, P = 0.89). MMP-3-1612 6A5A genotypeshowed higher risk for development of HAND in alcohol users (0R = 1.65, P = 0.44). MMP-1 genotype may have aninfluence on development of HAND whereas MMP3-1612 5A5A genotype may reduce risk for pathogenesis of HAND.

  8. Analysis on association between PLA2G1 2A polymorphisms and autism spectrum disorder of Han nationality children in North China%PLA2G12A基因多态性与中国北方汉族儿童孤独症谱系障碍的关联性分析

    Institute of Scientific and Technical Information of China (English)

    雷洁; 姜慧轶; 邱爽; 刘仕成; 彭博; 李日; 白烨; 刘雅文; 于雅琴; 朱筱娟

    2016-01-01

    目的:研究PLA2G12A基因单核苷酸多态性(SNPs)与中国北方汉族儿童孤独症谱系障碍(ASD)的关联性,探讨PLA2G12A基因是否是 ASD的易感基因。方法:采用 Sequenom Mass ARRAY系统对纳入的85例 ASD患儿(病例组)和183名健康儿童(对照组)PLA2G12A 基因上的4个 SNPs 位点(rs6533451、rs2285714、rs2285713和 rs11728699)进行基因型和等位基因检测;采用在线 SNPStats 分析程序行 Hardy-Weioberg检验,分析2组研究对象基因型和等位基因型频数分布的差异;采用遗传模型分析各位点的基因多态性与 ASD的关联性;采用 Haploview 4.2软件分析各个单体型与 ASD的关联性。结果:病例组和对照组研究对象PLA2G12A基因4个位点的基因型和等位基因型分布均符合 Hardy-Weinberg平衡检验(P>0.05)。病例组和对照组PLA2G12A基因的4个位点基因型和等位基因频数分布差异无统计学意义(P>0.05);5个遗传模型下,各位点多态性与 ASD均无关联(P>0.05);3个位点(rs6533451、rs2285714和 rs11728699)组成的单体型与 ASD无关联(P>0.05)。结论:PLA2G12A可能不是中国北方汉族儿童 ASD的易感基因。%Objective:To investigate the association between PLA2G12A polymorphism and autism spectrum disorder (ASD)in North Han Chinese children,and to explore whether PLA2G12A is a susceptibility gene for ASD.Methods:A total of 85 ASD children (case group)and 183 healthy children (control group)were enrolled in our case-control study.Four SNPs (rs6533451,rs2285714,rs2285713,and rs11728699)on PLA2G12A gene were selected and the genotype and allele were tested using Sequenom Mass ARRAY System. The SNPStats program was used for analyzing the Hardy-Weinberg equilibrium test;the differences in genotypic and allelic frequencies of the subj ects between two groups were detected;the association between ASD and 4 SNPs was analyzed by genetic models;the Haploview 4

  9. Identification of candidate genes for Parkinson's disease through blood transcriptome analysis in LRRK2-G2019S carriers, idiopathic cases, and controls.

    Science.gov (United States)

    Infante, Jon; Prieto, Carlos; Sierra, María; Sánchez-Juan, Pascual; González-Aramburu, Isabel; Sánchez-Quintana, Coro; Berciano, José; Combarros, Onofre; Sainz, Jesús

    2015-02-01

    The commonest known cause of Parkinson's disease (PD) is the G2019S mutation of the LRRK2 gene, but this mutation is not sufficient for causing PD, and many carriers of the mutation never develop PD symptoms during life. Differences at the expression level of certain genes, resulting from either genetic variations or environmental interactions, might be one of the mechanisms underlying differential risks for developing both idiopathic and genetic PD. To identify the genes involved in PD pathogenesis, we compared genome-wide gene expression (RNA-seq) in peripheral blood of 20 PD patients carrying the G2019S mutation of the LRRK2 gene, 20 asymptomatic carriers of the mutation, 20 subjects with idiopathic PD, 20 controls and 7 PD patients before and after initiating dopaminergic therapy. We identified 13 common genes (ADARB2, CEACAM6, CNTNAP2, COL19A1, DEF4, DRAXIN, FCER2, HBG1, NCAPG2, PVRL2, SLC2A14, SNCA, and TCL1B) showing significant differential expression between G2019S-associated PD and asymptomatic carriers and also between idiopathic PD and controls but not between untreated and treated patients. Some of these genes are functionally involved in the processes known to be involved in PD pathogenesis, such as Akt signaling, glucose metabolism, or immunity. We consider that these genes merit further attention in future studies as potential candidate genes involved in both idiopathic and LRRK2-G2019S-associated forms of PD.

  10. Identification of the PLA2G6 c.1579G>A Missense Mutation in Papillon Dog Neuroaxonal Dystrophy Using Whole Exome Sequencing Analysis

    Science.gov (United States)

    Tsuboi, Masaya; Watanabe, Manabu; Nibe, Kazumi; Yoshimi, Natsuko; Kato, Akihisa; Sakaguchi, Masahiro; Yamato, Osamu; Tanaka, Miyuu; Kuwamura, Mitsuru; Kushida, Kazuya; Harada, Tomoyuki; Chambers, James Kenn; Sugano, Sumio; Uchida, Kazuyuki; Nakayama, Hiroyuki

    2017-01-01

    Whole exome sequencing (WES) has become a common tool for identifying genetic causes of human inherited disorders, and it has also recently been applied to canine genome research. We conducted WES analysis of neuroaxonal dystrophy (NAD), a neurodegenerative disease that sporadically occurs worldwide in Papillon dogs. The disease is considered an autosomal recessive monogenic disease, which is histopathologically characterized by severe axonal swelling, known as “spheroids,” throughout the nervous system. By sequencing all eleven DNA samples from one NAD-affected Papillon dog and her parents, two unrelated NAD-affected Papillon dogs, and six unaffected control Papillon dogs, we identified 10 candidate mutations. Among them, three candidates were determined to be “deleterious” by in silico pathogenesis evaluation. By subsequent massive screening by TaqMan genotyping analysis, only the PLA2G6 c.1579G>A mutation had an association with the presence or absence of the disease, suggesting that it may be a causal mutation of canine NAD. As a human homologue of this gene is a causative gene for infantile neuroaxonal dystrophy, this canine phenotype may serve as a good animal model for human disease. The results of this study also indicate that WES analysis is a powerful tool for exploring canine hereditary diseases, especially in rare monogenic hereditary diseases. PMID:28107443

  11. LRRK2 G2019S in families with Parkinson disease who originated from Europe and the Middle East: evidence of two distinct founding events beginning two millennia ago.

    Science.gov (United States)

    Zabetian, Cyrus P; Hutter, Carolyn M; Yearout, Dora; Lopez, Alexis N; Factor, Stewart A; Griffith, Alida; Leis, Berta C; Bird, Thomas D; Nutt, John G; Higgins, Donald S; Roberts, John W; Kay, Denise M; Edwards, Karen L; Samii, Ali; Payami, Haydeh

    2006-10-01

    The leucine-rich repeat kinase 2 (LRRK2) G2019S mutation is the most common genetic determinant of Parkinson disease (PD) identified to date. It accounts for 1%-7% of PD in patients of European origin and 20%-40% in Ashkenazi Jews and North African Arabs with PD. Previous studies concluded that patients from these populations all shared a common Middle Eastern founder who lived in the 13th century. We tested this hypothesis by genotyping 25 microsatellite and single-nucleotide-polymorphism markers in 22 families with G2019S and observed two distinct haplotypes. Haplotype 1 was present in 19 families of Ashkenazi Jewish and European ancestry, whereas haplotype 2 occurred in three European American families. Using a maximum-likelihood method, we estimated that the families with haplotype 1 shared a common ancestor 2,250 (95% confidence interval 1,650-3,120) years ago, whereas those with haplotype 2 appeared to share a more recent founder. Our data suggest two separate founding events for G2019S in these populations, beginning at a time that coincides with the Jewish Diasporas.

  12. Role of t{sub 2g} electrons in Mn-Tb coupling of multiferroic TbMnO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Y. Y. [College of Electronic Science and Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210003 (China); Wang, Y. L.; Liu, J.-M., E-mail: liujm@nju.edu.cn [Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Wei, T. [College of Science, Civil Aviation University of China, Tianjin 300300 (China)

    2014-08-14

    We investigate the effect of Cr-doping in polycrystalline TbMn{sub 1−x}Cr{sub x}O{sub 3} (x ≤ 6%) ceramics on the magnetism, ferroelectricity, and dielectricity. The Cr substitution gradually suppresses the ferroelectricity induced by the Mn spiral spin ordering, and results in a stronger modulation of polarization by magnetic field with increasing x. However, the transition temperature T{sub Tb} corresponding to onset of Tb magnetic ordering has barely shifted with Cr doping. In other words, although the Cr-doping obviously disrupts the Mn spiral spin ordering, the exchange field J{sub Mn-Tb} acting on the Tb moments from the Mn-spin structure is hardly impacted. Our work demonstrates that the e{sub g} electron of Mn{sup 3+} plays an important role in forming the Mn spiral spin order, but the f-d exchange interaction between the Mn 3d spins and the Tb 4f moments in multiferroic TbMnO{sub 3} almost involves only the t{sub 2g} electrons.

  13. [Adult-onset case of idiopathic neurodegeneration with brain iron accumulation without mutations in the PANK2 and PLA2G6 genes].

    Science.gov (United States)

    Saiki, Shinji; Sekine, Takeshi; Ueno, Yuji; Yoshino, Hiroyo; Takahashi, Junko; Tani, Yoshihiko; Kambe, Yasunori; Motoi, Yumiko; Hattori, Nobutaka

    2009-08-01

    A 47-year-old man with a 15-year history of bipolar disorder treated with anti-depressants, lithium carbonate or neuroleptics was admitted because of marked difficulty in gait and speech. At the age 45, he was unable to walk without bilateral assists and became a wheel-chair state. There was no family history and his mother, father and younger sister were neurologically free. General physical examinations revealed no abnormalities. Neurologically, he was moderately demented (mini mental state examination: 18/30) and showed bilateral horizontal gaze nystagmus, parkinsonism, cerebellar ataxia, dysarthria and moderate spastic paraparesis. No involuntary movements were noted. Wet blood smear showed acanthocytes, while blood chemistries revealed no abnormalities including levels of serum creatine kinase, hepatic enzymes and blood beta-lipoprotein. Kell antigen expressions of the red blood cells were within normal limit. Western blot analysis with anti-chorein antibody detected normal chorein expression levels of the red blood cells. Cranial MRI showed severe symmetric atrophy of the frontotemporal lobes, caudate nuclei, putamen, and brainstem. Also, MRI-gradient echo showed symmetric iron accumulation in the medial portion of the globus pallidus without surrounding high intensity areas, so called "eye-of-the-tiger sign". Genetic analyses revealed no mutations in the PANK2 and PLA2G6 genes. Therefore, he was diagnosed as idiopathic neurodegeneration with brain iron accumulation (NBIA). These findings suggest that NBIA is heterogeneous and other additional genes remain to be found.

  14. Unjuk Kerja Jaringan Seluler 2G dan 3G PT. XL Axiata di Area Jawa Tengah Bagian Utara setelah Proyek Swap dan Modernisasi

    Directory of Open Access Journals (Sweden)

    Eva Yovita Dwi Utami

    2015-04-01

    Full Text Available The increasing number of customers and the need for reliable communication require the availability of coverage, sufficient capacity and good quality of mobile communications networks. New BTS implementation is required to cover a wider area with good network quality. However, it often requires high cost and long time to get permission from the government and local residents. Swap and Modernization Project is a project that swap the previous 3G equipment using BTS 3900 Huawei with Ericsson RBS 6000 and modernize the 2G RBS 2000 to RBS 6000 and then carry out parameter settings to optimize the network. In this paper, we report the results of mobile network performance after Swap and Modernization projects had been done in terms of the signal strength improvements, which are showed by Rx Level, RSCP and CDD Dump parameters. The study was conducted in PT XL Axiata Northern Areas of Central Java with D5 cluster as a sample. The results show improvement of Rx Level that increased by 89.93 %, and RSCP value increased by 58.36 %. The swap and modernization of the BTS and parameter settings are able to improve CDD Dump parameters. These improvements are able to expand the coverage area of cluster D5 sites.

  15. Measuring tree height and preparation volume table using an innovative method.

    Science.gov (United States)

    Lotfalian, Majid; Nouri, Zahra; Kooch, Yahya; Zobeiri, Mahmoud

    2007-10-15

    Zarbin (Cupressus sempervirence var. horizontalis) with its unique characteristics is one of the worthiest species which can be found in the central area of Alborz in the North of Iran. Especially in the Roodbar-manjil area, Chaloos-Hassanabad valley as well as it extends from Zarringol area to Gorgan. Although the distribution areas of this species have been protected, these forests have been invaded by the villagers who use this useful wood. For this reason in the Roodbar area, trees with DBH>30 cm are extremely rare. To recognize and to be aware of the stand quantity, the current research tries to calculate the species volume table in Roodbar area, to be the basis for any calculation of the volume of stand in the region. For this purpose, trees have been sampled using the line sampling method. After estimating the form factor, Tarif table have been prepared. In this study, a new method for measuring tree height is presented, in which, instead of measuring slope distance from observer to tree (which is difficult in young conifers because of existence branches in lower height) distance between the eye level of observer to tree butt is measured. Which doing of it is easier, time of field work is decreased and accuracy of measurement and calculation is increased.

  16. Variable volume combustor

    Energy Technology Data Exchange (ETDEWEB)

    Ostebee, Heath Michael; Ziminsky, Willy Steve; Johnson, Thomas Edward; Keener, Christopher Paul

    2017-01-17

    The present application provides a variable volume combustor for use with a gas turbine engine. The variable volume combustor may include a liner, a number of micro-mixer fuel nozzles positioned within the liner, and a linear actuator so as to maneuver the micro-mixer fuel nozzles axially along the liner.

  17. A glycoconjugate antigen based on the recognition motif of a broadly neutralizing human immunodeficiency virus antibody, 2G12, is immunogenic but elicits antibodies unable to bind to the self glycans of gp120

    DEFF Research Database (Denmark)

    Astronomo, Rena D; Lee, Hing-Ken; Scanlan, Christopher N

    2008-01-01

    The glycan shield of human immunodeficiency virus type 1 (HIV-1) gp120 contributes to viral evasion from humoral immune responses. However, the shield is recognized by the HIV-1 broadly neutralizing antibody (Ab), 2G12, at a relatively conserved cluster of oligomannose glycans. The discovery of 2G...... of Man(9)GlcNAc(2) inhibits 2G12 binding to gp120 as efficiently as Man(9)GlcNAc(2) itself, indicating the potential use of Man(4) as a building block for creating immunogens. Here, we describe the development of neoglycoconjugates displaying variable copy numbers of Man(4) on bovine serum albumin (BSA...

  18. Volume Regulated Channels

    DEFF Research Database (Denmark)

    Klausen, Thomas Kjær

    of volume perturbations evolution have developed system of channels and transporters to tightly control volume homeostasis. In the past decades evidence has been mounting, that the importance of these volume regulated channels and transporters are not restricted to the defense of cellular volume...... but are also essential for a number of physiological processes such as proliferation, controlled cell death, migration and endocrinology. The thesis have been focusing on two Channels, namely the swelling activated Cl- channel (ICl, swell) and the transient receptor potential Vanilloid (TRPV4) channel. I: Cl......- serves a multitude of functions in the mammalian cell, regulating the membrane potential (Em), cell volume, protein activity and the driving force for facilitated transporters giving Cl- and Cl- channels a major potential of regulating cellular function. These functions include control of the cell cycle...

  19. Synthesis and Properties of Fe3O4@SiO2-g-PDMAEMA Prepared via Combination of Atom Transfer Radical Polymerization and "Click" Reaction%原子转移自由基聚合与“Click”反应相结合制备Fe3O4@SiO2-g-PDMAEMA及其性质研究

    Institute of Scientific and Technical Information of China (English)

    张世华; 朱汇雯; 张明祖; 倪沛红

    2011-01-01

    Poly[2-(N,N-dimethylamino)ethyl methacrylate](PDMAEMA) was prepared and grafted onto Fe3O4 magnetic nanoparticles encapsulated with SiO2(Fe3O4@SiO2) via combination of ATRP and "Click" reaction.So the magnetic nanoparticles grafted with PDMAEMA(Fe3O4@SiO2-g-PDMAEMA) on the sur-face were obtained.1H NMR and GPC tests were carried out to study the structure,molecular weight and polydispersity index(PDI) of alkynyl-capped PDMAEMA.TEM,FT-IR,TGA,DLS and Zeta potential tests were used to study the structures,morphologies,particle diameters and surface properties of Fe3O4@SiO2 and Fe3O4@SiO2-g-PDMAEMA,respectively.%结合原子转移自由基聚合(ATRP)与点击反应("Click"reaction),在SiO2包裹的Fe3O4磁性纳米粒子(Fe3O4@SiO2)表面接枝聚[甲基丙烯酸-2-(N,N-二甲氨基)乙酯](PDMAEMA),得到了表面接枝PDMAEMA的磁性纳米粒子(Fe3O4@SiO2-g-PDMAEMA).通过1H NMR和GPC测试,研究炔基封端的PDMAEMA的结构、分子量及分子量分布.通过透射电镜(TEM)、红外光谱(FT-IR)、热重分析(TGA)、动态光散射(DLS)和Zeta电位测试,研究了Fe3O4@SiO2和Fe3O4@SiO2-g-PDMAEMA的结构、形貌、粒径及表面性质.

  20. ОКИСЛЕНИЕ СО НА КАТАЛИЗАТОРАХ CUO/CEO 2/G-AL 2O 3 И СО 3О 4/CEO 2/G-AL 2O 3

    OpenAIRE

    Загайнов, И.; Либерман, Е.; Михайличенко, А.; Конькова, Т.; Почиталкина, И.

    2008-01-01

    Синтезированы образцы CuO/CeO 2/g-Al 2O 3 и Со 3О 4/CeO 2/g-Al 2O 3 путем импрегнирования растворов нитратов соответствующих солей. Исследована каталитическая активность нанесенных катализаторов в реакции окисления СО. Показано, что каталитическая активность синтезированных образцов определяется химическим составом и способом нанесения вторичного носителя CeO 2 на поверхность g-Al 2O 3.CuO/CeO 2/g-Al 2O 3 and Со 3О 4/CeO 2/g-Al 2O 3 were synthesited by their nitrate salts impregnation.Catalyt...

  1. Ultrasonic Phased Array Technology Positioning Analysis of Butt Weld Surface Defect with Different Thickness%超声相控阵技术对不同厚度对接焊缝表层缺陷的定位

    Institute of Scientific and Technical Information of China (English)

    岳庚新; 王妍; 赵远

    2016-01-01

    简要介绍了常规超声波检测和超声相控阵检测的特点。以超声相控阵技术为研究对象,对不同厚度对接焊缝表层缺陷的定位进行了试验研究。验证结果表明,超声相控阵检测技术能够实现对不同厚度对接焊缝表层缺陷的精确定位,提高了工作效率。超声相控阵检测技术可实现A扫、 S扫等不同扫查方式的对比,使得对缺陷的判定更直观、更具有说服力,并且能够实现整个扫查过程全数据的存储,便于后期的处理和追溯。%In this article, it briefly introduced the characteristics of conventional ultrasonic testing and ultrasonic phased array technology. With ultrasonic phased array technology as the research object, the positioning of butt weld surface defect with different thickness was studied. The results showed that the ultrasonic phased array technology can realize accurate positioning for the butt weld surface defects with different thickness and improve working efficiency. It also can realize the comparison of different scanning modes, such as A mode, S mode and so on, make the determination of the scan results more intuitive and more persuasive, and can realize all data storage of whole scanning process, convenient for later processing and traceability.

  2. Simultaneous determination of aflatoxin B(1), B(2), G(1), G(2), ochratoxin A, and sterigmatocystin in traditional Chinese medicines by LC-MS-MS.

    Science.gov (United States)

    Zheng, Runsheng; Xu, Hui; Wang, Wenli; Zhan, Ruoting; Chen, Weiwen

    2014-05-01

    In this paper we describe a rapid, simple, and costeffective liquid chromatography–tandem mass spectrometric (LC–MS–MS) method for simultaneous analysis of aflatoxin B1, B2, G1, and G2, ochratoxin A, and sterigmatocystin in 25 traditional Chinese medicines (TCMs). The method is based on single extraction with 84:16 (v/v) acetonitrile–water then analysis of the diluted crude extract without further clean-up. Chromatographic separation was achieved on a C18 column, with a mobile phase gradient prepared from aqueous 4 mmol L−1 ammonium acetate–0.1 % formic acid and methanol. Quantification of the analytes was by selective reaction monitoring (SRM) on a triple-quadrupole mass spectrometer in positive-ionization mode. Special focus was on investigating and reducing matrix effects to improve accuracy. The established method was validated by determination of linearity (r>0.995), sensitivity (limits of quantification 1.6–25.0 ng L−1), apparent recovery (84.8–110.6 %), extraction recovery (83.6–106.1 %), and precision (relative standard deviation ≤9.9 %) for two representative TCMs, Semen Armeniacae Amarae and Radix Pseudostellariae. The applicability of the method to TCMs other than these was further investigated, and 23 other TCMs with acceptable matrix effects (80.2–118.6 %) were screened. The validated method was finally used to assess mycotoxin contamination of 244 samples of 25 TCMs collected from local hospitals and TCM pharmacies. Aflatoxin B1 and ochratoxin A were detected in 5.3 % of the samples. Sterigmatocystin, the most prevalent mycotoxin contaminant, was present in 26.2 % of the samples tested; this has not been reported previously. The results of this work imply greater attention should be devoted to evaluation of the potential hazard caused by sterigmatocystin in TCMs.

  3. Porcine G₀/G₁ switch gene 2 (G0S2) expression is regulated during adipogenesis and short-term in-vivo nutritional interventions.

    Science.gov (United States)

    Ahn, Jinsoo; Oh, Shin-Ae; Suh, Yeunsu; Moeller, Steven J; Lee, Kichoon

    2013-03-01

    Adipose triglyceride lipase (ATGL), catalyzing the initial step of hydrolysis of triacylglycerol (TAG) in adipocytes, has been known to be inhibited by G0/G1 switch gene 2 (G0S2). In this study, we report the porcine G0S2 cDNA and amino acid sequences as well as the expression level of porcine G0S2. The porcine G0S2 mRNA was abundantly expressed in adipose tissue and liver among various tissues. In adipose tissue, porcine G0S2 expression was 16-fold higher in the fat cell fraction than the stromal vascular fraction. The G0S2 level increased significantly during adipogenesis in vitro and in vivo. These data indicate that G0S2 expression is closely associated with lipid accumulation and adipogenesis. Considering G0S2 as an inhibitor of cell proliferation, the relatively low levels of G0S2 in preadipocytes and adipose tissues of fetal and neonatal pigs compared to adipocytes and adipose tissues of adult pigs may allow the fast cell proliferation rates. Further studies showed that a short-term 24-h fast down-regulated G0S2 expression and increased ATGL expression in adipose tissue; however, a long-term calorie restriction for 8 days had no influence on the level of G0S2 but increased ATGL expression. Therefore, porcine G0S2, which is both a negative regulator of ATGL-mediated lipolysis and cell proliferation in adipose tissue, can be down-regulated in vivo by a short-term 24-h fast followed by increased ATGL-mediated lipolysis.

  4. Volume regulation in epithelia

    DEFF Research Database (Denmark)

    Larsen, Erik Hviid; Hoffmann, Else Kay

    2016-01-01

    function of iso-osmotic fluid transport that depends on Na+ recirculation. The causative relationship is discussed for a fluid-absorbing and a fluid-secreting epithelium of which the Na+ recirculation mechanisms have been identified. A large number of transporters and ion channels involved in cell volume...... regulation are cloned. The volume-regulated anion channel (VRAC) exhibiting specific electrophysiological characteristics seems exclusive to serve cell volume regulation. This is contrary to K+ channels as well as cotransporters and exchange mechanisms that may serve both transepithelial transport and cell...

  5. Towards the Amplituhedron Volume

    CERN Document Server

    Ferro, Livia; Orta, Andrea; Parisi, Matteo

    2015-01-01

    It has been recently conjectured that scattering amplitudes in planar N=4 super Yang-Mills are given by the volume of the (dual) amplituhedron. In this paper we show some interesting connections between the tree-level amplituhedron and a special class of differential equations. In particular we demonstrate how the amplituhedron volume for NMHV amplitudes is determined by these differential equations. The new formulation allows for a straightforward geometric description, without any reference to triangulations. Finally we discuss possible implications for volumes related to generic N^kMHV amplitudes.

  6. Unsteady flow volumes

    Energy Technology Data Exchange (ETDEWEB)

    Becker, B.G.; Lane, D.A.; Max, N.L.

    1995-03-01

    Flow volumes are extended for use in unsteady (time-dependent) flows. The resulting unsteady flow volumes are the 3 dimensional analog of streamlines. There are few examples where methods other than particle tracing have been used to visualize time varying flows. Since particle paths can become convoluted in time there are additional considerations to be made when extending any visualization technique to unsteady flows. We will present some solutions to the problems which occur in subdivision, rendering, and system design. We will apply the unsteady flow volumes to a variety of field types including moving multi-zoned curvilinear grids.

  7. Bronchoscopic lung volume reduction

    Directory of Open Access Journals (Sweden)

    M. I. Polkey

    2006-12-01

    Full Text Available Surgical lung volume reduction can improve exercise performance and forced expiratory volume in one second in patients with emphysema. However, the procedure is associated with a 5% mortality rate and a nonresponse rate of 25%. Accordingly, interest has focused on alternative ways of reducing lung volume. Two principle approaches are used: collapse of the diseased area using blockers placed endobronchially and the creation of extrapulmonary pathways. Preliminary data from the former approach suggest that it can be successful and that the magnitude of success is related to reduction in dynamic hyperinflation.

  8. Free volume under shear

    Science.gov (United States)

    Maiti, Moumita; Vinutha, H. A.; Sastry, Srikanth; Heussinger, Claus

    2015-10-01

    Using an athermal quasistatic simulation protocol, we study the distribution of free volumes in sheared hard-particle packings close to, but below, the random-close packing threshold. We show that under shear, and independent of volume fraction, the free volumes develop features similar to close-packed systems — particles self-organize in a manner as to mimick the isotropically jammed state. We compare athermally sheared packings with thermalized packings and show that thermalization leads to an erasure of these structural features. The temporal evolution in particular the opening-up and the closing of free-volume patches is associated with the single-particle dynamics, showing a crossover from ballistic to diffusive behavior.

  9. Integers annual volume 2013

    CERN Document Server

    Landman, Bruce

    2014-01-01

    ""Integers"" is a refereed online journal devoted to research in the area of combinatorial number theory. It publishes original research articles in combinatorics and number theory. This work presents all papers of the 2013 volume in book form.

  10. Renormalized Volumes with Boundary

    CERN Document Server

    Gover, A Rod

    2016-01-01

    We develop a general regulated volume expansion for the volume of a manifold with boundary whose measure is suitably singular along a separating hypersurface. The expansion is shown to have a regulator independent anomaly term and a renormalized volume term given by the primitive of an associated anomaly operator. These results apply to a wide range of structures. We detail applications in the setting of measures derived from a conformally singular metric. In particular, we show that the anomaly generates invariant (Q-curvature, transgression)-type pairs for hypersurfaces with boundary. For the special case of anomalies coming from the volume enclosed by a minimal hypersurface ending on the boundary of a Poincare--Einstein structure, this result recovers Branson's Q-curvature and corresponding transgression. When the singular metric solves a boundary version of the constant scalar curvature Yamabe problem, the anomaly gives generalized Willmore energy functionals for hypersurfaces with boundary. Our approach ...

  11. Environmental chemistry: Volume A

    Energy Technology Data Exchange (ETDEWEB)

    Yen, T.F.

    1999-08-01

    This is an extensive introduction to environmental chemistry for engineering and chemical professionals. The contents of Volume A include a brief review of basic chemistry prior to coverage of litho, atmo, hydro, pedo, and biospheres.

  12. Generalized Partial Volume

    DEFF Research Database (Denmark)

    Darkner, Sune; Sporring, Jon

    2011-01-01

    Mutual Information (MI) and normalized mutual information (NMI) are popular choices as similarity measure for multimodal image registration. Presently, one of two approaches is often used for estimating these measures: The Parzen Window (PW) and the Generalized Partial Volume (GPV). Their theoret......Mutual Information (MI) and normalized mutual information (NMI) are popular choices as similarity measure for multimodal image registration. Presently, one of two approaches is often used for estimating these measures: The Parzen Window (PW) and the Generalized Partial Volume (GPV...

  13. Reachable volume RRT

    KAUST Repository

    McMahon, Troy

    2015-05-01

    © 2015 IEEE. Reachable volumes are a new technique that allows one to efficiently restrict sampling to feasible/reachable regions of the planning space even for high degree of freedom and highly constrained problems. However, they have so far only been applied to graph-based sampling-based planners. In this paper we develop the methodology to apply reachable volumes to tree-based planners such as Rapidly-Exploring Random Trees (RRTs). In particular, we propose a reachable volume RRT called RVRRT that can solve high degree of freedom problems and problems with constraints. To do so, we develop a reachable volume stepping function, a reachable volume expand function, and a distance metric based on these operations. We also present a reachable volume local planner to ensure that local paths satisfy constraints for methods such as PRMs. We show experimentally that RVRRTs can solve constrained problems with as many as 64 degrees of freedom and unconstrained problems with as many as 134 degrees of freedom. RVRRTs can solve problems more efficiently than existing methods, requiring fewer nodes and collision detection calls. We also show that it is capable of solving difficult problems that existing methods cannot.

  14. Incidência de fumonisina B1, aflatoxinas B1, B2, G1 e G2, ocratoxina A e zearalenona em produtos de milho Occurrence of fumonisin B1, aflatoxins B1, B2, G1, and G2, ochratoxin A and zearalenone in corn products

    Directory of Open Access Journals (Sweden)

    Luciane Mie Kawashima

    2006-09-01

    Full Text Available Levantamentos de ocorrência de micotoxinas em alimentos foram realizados nas últimas duas décadas nas regiões Sudeste e Sul do Brasil. Levantamentos em alimentos comercializados em outras regiões têm-se limitado a aflatoxinas em amendoim e castanhas do Brasil. O presente trabalho pesquisou a presença de fumonisina B1, aflatoxinas B1, B2, G1 e G2, ocratoxina A e zearalenona em 74 amostras de produtos a base de milho adquiridas no comércio da cidade de Recife, PE, durante o período de 1999 a 2001. Fumonisina B1 foi determinada por cromatografia líquida de alta eficiência com detecção por fluorescência e as demais toxinas foram determinadas por cromatografia em camada delgada. Fumonisina B1 foi encontrada em 94,6% das amostras em concentrações variando de 20 a 8600 µg/kg. Apenas 5 amostras continham aflatoxina B1 e o teor máximo encontrado foi 20 µg/kg. Duas amostras ultrapassaram o limite de 20 µg/kg para a somatória das aflatoxinas B1, B2, G1 e G2 (farinha de milho pré-cozida com 21,5 µg/kg e quirera (xerém com 23,3 µg/kg. As aflatoxinas G1 e G2, ocratoxina A e zearalenona não foram detectadas em nenhuma das amostras. Todas as amostras contaminadas com aflatoxinas também apresentaram fumonisina B1.Research concerning the presence of mycotoxin in food has been conducted in the Southwest and South regions of Brazil over the last two decades. Research in other regions has been limited to aflatoxin in peanuts and Brazil nuts. The aim of this work is to study the presence of fumonisin B1, aflatoxins B1, B2, G1, and G2, ochratoxin A and zearalenone in 74 samples of corn products acquired in shops and food markets in the city of Recife (PE from 1999 to 2001. Fumonisin B1 was determined by high performance liquid chromatography and fluorescence was detected. The other toxins were determined by thin layer chromatography. Fumonisin B1 was found in 94.6% of the samples in levels from 20 to 8600 µg/kg. Only 5 samples contained

  15. Volumes of chain links

    CERN Document Server

    Kaiser, James; Rollins, Clint

    2011-01-01

    Agol has conjectured that minimally twisted n-chain links are the smallest volume hyperbolic manifolds with n cusps, for n at most 10. In his thesis, Venzke mentions that these cannot be smallest volume for n at least 11, but does not provide a proof. In this paper, we give a proof of Venzke's statement. The proof for n at least 60 is completely rigorous. The proof for n between 11 and 59 uses a computer calculation, and can be made rigorous for manifolds of small enough complexity, using methods of Moser and Milley. Finally, we prove that the n-chain link with 2m or 2m+1 half-twists cannot be the minimal volume hyperbolic manifold with n cusps, provided n is at least 60 or |m| is at least 8, and we give computational data indicating this remains true for smaller n and |m|.

  16. HARNESSING BIG DATA VOLUMES

    Directory of Open Access Journals (Sweden)

    Bogdan DINU

    2014-04-01

    Full Text Available Big Data can revolutionize humanity. Hidden within the huge amounts and variety of the data we are creating we may find information, facts, social insights and benchmarks that were once virtually impossible to find or were simply inexistent. Large volumes of data allow organizations to tap in real time the full potential of all the internal or external information they possess. Big data calls for quick decisions and innovative ways to assist customers and the society as a whole. Big data platforms and product portfolio will help customers harness to the full the value of big data volumes. This paper deals with technical and technological issues related to handling big data volumes in the Big Data environment.

  17. Topological Active Volumes

    Directory of Open Access Journals (Sweden)

    Barreira N

    2005-01-01

    Full Text Available The topological active volumes (TAVs model is a general model for 3D image segmentation. It is based on deformable models and integrates features of region-based and boundary-based segmentation techniques. Besides segmentation, it can also be used for surface reconstruction and topological analysis of the inside of detected objects. The TAV structure is flexible and allows topological changes in order to improve the adjustment to object's local characteristics, find several objects in the scene, and identify and delimit holes in detected structures. This paper describes the main features of the TAV model and shows its ability to segment volumes in an automated manner.

  18. Aperiodic Volume Optics

    Science.gov (United States)

    Gerke, Tim D.

    Presented in this thesis is an investigation into aperiodic volume optical devices. The three main topics of research and discussion are the aperiodic volume optical devices that we call computer-generated volume holograms (CGVH), defects within periodic 3D photonic crystals, and non-periodic, but ordered 3D quasicrystals. The first of these devices, CGVHs, are designed and investigated numerically and experimentally. We study the performance of multi-layered amplitude computer-generated volume holograms in terms of efficiency and angular/frequency selectivity. Simulation results show that such aperiodic devices can increase diffraction efficiency relative to periodic amplitude volume holograms while maintaining angular and wavelength selectivity. CGVHs are also designed as voxelated volumes using a new projection optimization algorithm. They are investigated using a volumetric diffraction simulation and a standard 3D beam propagation technique as well as experimentally. Both simulation and experiment verify that the structures function according to their design. These represent the first diffractive structures that have the capacity for generating arbitrary transmission and reflection wave fronts and that provide the ability for multiplexing arbitrary functionality given different illumination conditions. Also investigated and discussed in this thesis are 3D photonic crystals and quasicrystals. We demonstrate that these devices can be fabricated using a femtosecond laser direct writing system that is particularly appropriate for fabrication of such arbitrary 3D structures. We also show that these devices can provide 3D partial bandgaps which could become complete bandgaps if fabricated using high index materials or by coating lower index materials with high index metals. Our fabrication method is particularly suited to the fabrication of engineered defects within the periodic or quasi-periodic systems. We demonstrate the potential for fabricating defects within

  19. The volume of a soliton

    Energy Technology Data Exchange (ETDEWEB)

    Adam, C., E-mail: adam@fpaxp1.usc.es [Departamento de Física de Partículas, Universidad de Santiago de Compostela and Instituto Galego de Física de Altas Enerxias (IGFAE), E-15782 Santiago de Compostela (Spain); Haberichter, M. [School of Mathematics, Statistics and Actuarial Science, University of Kent, Canterbury, CT2 7NF (United Kingdom); Wereszczynski, A. [Institute of Physics, Jagiellonian University, Lojasiewicza 11, Kraków (Poland)

    2016-03-10

    There exists, in general, no unique definition of the size (volume, area, etc., depending on dimension) of a soliton. Here we demonstrate that the geometric volume (area etc.) of a soliton is singled out in the sense that it exactly coincides with the thermodynamical or continuum-mechanical volume. In addition, this volume may be defined uniquely for rather arbitrary solitons in arbitrary dimensions.

  20. 搅拌摩擦对接焊6061铝合金的高周疲劳行为%High-cycle fatigue behavior of friction stir butt welded 6061 aluminium alloy

    Institute of Scientific and Technical Information of China (English)

    Hrishikesh DAS; Debayan CHAKRABORTY; Tapan KUMAR PAL

    2014-01-01

    对6061铝合金进行搅拌摩擦对接焊,其焊接工艺参数为:旋转速度600、800、1000、1200 r/min,前进速度80、100 mm/min,探针插入深度1.85 mm。基于搅拌摩擦焊参数计算得到的能量输入结果表明,在输入能量为196~405 kJ的情况下,接头在297~354 kJ的输入能量范围内有最大的抗拉强度。在不同的应力比(R=0.5,0.3,0.1,-0.3,-0.5)下,将高强度、低强度2种焊接头进行疲劳测试。结果表明,对于这2种焊接头,显微组织特征明显影响其疲劳性能,比如搅拌区、热力影响区(TMAZ)和热影响区。从接头的显微组织、裂纹扩展路径和断裂表面观察等方面对其疲劳强度进行讨论。%Friction stir welding (FSW) of 6061 aluminium alloy butt joint was carried out at each rotation speed of 600, 800, 1000, 1200 r/min for two different travel speeds, 80 and 100 mm/min, at a constant probe depth of 1.85 mm. The calculated energy input based on the FSW parameters studied shows that the ultimate tensile strength (UTS) of the butt joint is obtained within a certain range of energy input of 297 kJ to 354 kJ out of total range of energy input studied from 196 kJ to 405 kJ. The fatigue behaviors of high-strength and low-strength joints performed at different stress ratios, i.e., 0.5, 0.3, 0.1, -0.3, -0.5, indicate that the fatigue behaviors of both the welds are sensitive to the microstructural features, such as stir zone (SZ), thermo mechanically affected zone (TMAZ) and heat affected zone (HAZ). The observed fatigue strengths were discussed in terms of the microstructure, crack path behavior and fracture surface.