WorldWideScience

Sample records for volatile hydrocarbon production

  1. Radiation-induced volatile hydrocarbon production in platelets

    Energy Technology Data Exchange (ETDEWEB)

    Radha, E.; Vaishnav, Y.N.; Kumar, K.S.; Weiss, J.F.

    1989-01-01

    Generation of volatile hydrocarbons (ethane, pentane) as a measure of lipid peroxidation was followed in preparations from platelet-rich plasma irradiated in vitro. The hydrocarbons in the headspace of sealed vials containing irradiated and nonirradiated washed platelets, platelet-rich plasma, or platelet-poor plasma increased with time. The major hydrocarbon, pentane, increased linearly and significantly with increasing log radiation dose, suggesting that reactive oxygen species induced by ionizing radiation result in lipid peroxidation. Measurements of lipid peroxidation products may give an indication of suboptimal quality of stored and/or irradiated platelets.

  2. Radiation-induced volatile hydrocarbon production in platelets. Scientific report

    Energy Technology Data Exchange (ETDEWEB)

    Radha, E.; Vaishnav, Y.N.; Kumar, K.S.; Weiss, J.F.

    1989-01-01

    Thrombocytopenia plays an important role in the development of the post-irradiation hemorrhagic syndrome. Although destruction of platelet precursors in bone marrow is a major effect of high-dose radiation exposure, the effects of radiation on preformed platelets are unclear. The latter is also of concern with respect to blood-banking practices since platelets are often irradiated at doses in the range of 20-50 Gy before transfusions to prevent graft-versus-host disease. With increasing emphasis on allogenic and autologous bone-marrow transplantation, transfusions of irradiated platelets are likely to rise. Generation of volatile hydrocarbons (ethane, pentane) as a measure of lipid peroxidation was followed in preparations from platelet-rich plasma irradiated in vitro. The hydrocarbons in the headspace of sealed vials containing irradiated and nonirradiated washed platelets, platelet-rich plasma, or platelet-poor plasma increased with time. The major hydrocarbon, pentane, increased linearly and significantly with increasing log radiation dose, suggesting that reactive oxygen species induced by ionizing radiation result in lipid peroxidation. Measurements of lipid peroxidation products may give an indication of suboptimal quality of stored and/or irradiated platelets.

  3. Volatile hydrocarbons inhibit methanogenic crude oil degradation

    Directory of Open Access Journals (Sweden)

    Angela eSherry

    2014-04-01

    Full Text Available Methanogenic degradation of crude oil in subsurface sediments occurs slowly, but without the need for exogenous electron acceptors, is sustained for long periods and has enormous economic and environmental consequences. Here we show that volatile hydrocarbons are inhibitory to methanogenic oil biodegradation by comparing degradation of an artificially weathered crude oil with volatile hydrocarbons removed, with the same oil that was not weathered. Volatile hydrocarbons (nC5-nC10, methylcyclohexane, benzene, toluene and xylenes were quantified in the headspace of microcosms. Aliphatic (n-alkanes nC12-nC34 and aromatic hydrocarbons (4-methylbiphenyl, 3-methylbiphenyl, 2-methylnaphthalene, 1-methylnaphthalene were quantified in the total hydrocarbon fraction extracted from the microcosms. 16S rRNA genes from key microorganisms known to play an important role in methanogenic alkane degradation (Smithella and Methanomicrobiales were quantified by quantitative PCR. Methane production from degradation of weathered oil in microcosms was rapid (1.1 ± 0.1 µmol CH4/g sediment/day with stoichiometric yields consistent with degradation of heavier n-alkanes (nC12-nC34. For non-weathered oil, degradation rates in microcosms were significantly lower (0.4 ± 0.3 µmol CH4/g sediment/day. This indicated that volatile hydrocarbons present in the non-weathered oil inhibit, but do not completely halt, methanogenic alkane biodegradation. These findings are significant with respect to rates of biodegradation of crude oils with abundant volatile hydrocarbons in anoxic, sulphate-depleted subsurface environments, such as contaminated marine sediments which have been entrained below the sulfate-reduction zone, as well as crude oil biodegradation in petroleum reservoirs and contaminated aquifers.

  4. Ecotoxicologically based environmental risk limits for several volatile aliphatic hydrocarbons

    NARCIS (Netherlands)

    Jong FMW de; Posthuma-Doodeman CJAM; Verbruggen EMJ; SEC

    2007-01-01

    This report describes ecotoxicological environmental risk limits derived for a number of volatile aliphatic hydrocarbons. On the basis of evaluated literature, the National Institute for Public Health and the Environment (RIVM) proposes ecotoxicological environmental risk limits for these compounds

  5. Volatile non-terpenoid hydrocarbons from Ligusticum grayi roots

    Science.gov (United States)

    The root essential oil of Ligusticum grayi Coult. & Rose (Apiaceae) contains three volatile non-terpenoid hydrocarbons: the known C11 compound viridene, whose structure is hereby corrected to 1-[(2Z)-pent-2-en-1-yl]cyclohexa-1,3-diene; and the heretofore unreported C10 compounds 1-[(2Z)-but-2-en-1-y...

  6. Volatile Fuel Hydrocarbons and MTBE in the Environment

    Science.gov (United States)

    Cozzarelli, I. M.; Baehr, A. L.

    2003-12-01

    Petroleum hydrocarbons (hydrocarbons that result from petroleum products such as oil, gasoline, or diesel fuel) are among the most commonly occurring and widely distributed contaminants in the environment. Volatile hydrocarbons are the lighter fraction of the petroleum hydrocarbons and, together with fuel oxygenates, are most often released from crude oil and liquid petroleum products produced from crude oil. The demand for crude oil stems from the world's ever-growing energy need. From 1970 to 1999, primary energy production of the world grew by 76% (Energy Information Administration, 2001), with fossil fuels (crude oil, natural gas, and coal) accounting for ˜85% of all energy produced worldwide (Figure 1). World crude oil production reached a record 68 million barrels (bbl) per day (1.08×1010 L d-1) in 2000. The world's dependence on oil as an energy source clearly is identified as contributing to global warming and worsening air and water quality. (7K)Figure 1. World primary energy production by source from 1970 to 1999 (Energy Information Administration, 2001). Petroleum products are present in Earth's subsurface as solids, liquids, or gases. This chapter presents a summary of the environmental problems and issues related to the use of liquid petroleum, or oil. The focus is on the sources of volatile hydrocarbons and fuel oxygenates and the geochemical behavior of these compounds when they are released into the environment. Although oxygenates currently in commercial use include compounds other than methyl t-butyl ether (MTBE), such as ethanol (ETOH), most of the information presented here focuses on MTBE because of its widespread occurrence. The environmental impact of higher molecular weight hydrocarbons that also originate from petroleum products is described in (Chapter 9.13, Abrajano et al.).Crude oil occurs within the Earth and is a complex mixture of natural compounds composed largely of hydrocarbons containing only hydrogen and carbon atoms. The minor

  7. Adsorption of volatile hydrocarbons in iron polysulfide chalcogels

    KAUST Repository

    Ahmed, Ejaz

    2014-11-01

    We report the synthesis, characterization and possible applications of three new metal-chalcogenide aerogels KFe3Co3S 21, KFe3Y3S22 and KFe 3Eu3S22. Metal acetates react with the alkali metal polychalcogenides in formamide/water mixture to form extended polymeric frameworks that exhibit gelation phenomena. Amorphous aerogels obtained after supercritical CO2 drying have BET surface area from 461 to 573 m 2/g. Electron microscopy images and nitrogen adsorption measurements showed that pore sizes are found in micro (below 2 nm), meso (2-50 nm), and macro (above 50 nm) porous regions. These chalcogels possess optical bandgaps in the range of 1.55-2.70 eV. These aerogels have been studied for the adsorption of volatile hydrocarbons and gases. A much higher adsorption of toluene in comparison with cyclohexane and cyclopentane vapors have been observed. The adsorption capacities of the three volatile hydrocarbons are found in the following order: toluene > cyclohexane > cyclopentane. It has been observed that high selectivity in adsorption is feasible with high-surface-area metal chalcogenides. Similarly, almost an eight to ten times increase in adsorption selectivity towards CO2 over H2/CH4 was observed in the aerogels. Moreover, reversible ion-exchange properties for K+/Cs+ ions have also been demonstrated. © 2014 Elsevier Inc. All rights reserved.

  8. A rapid column technique for trapping and collecting of volatile fungal hydrocarbons and hydrocarbon derivatives.

    Science.gov (United States)

    Booth, Eric; Strobel, Gary; Knighton, Berk; Sears, Joe; Geary, Brad; Avci, Recep

    2011-10-01

    A custom-made stainless steel column was designed to contain various materials that would trap the hydrocarbons and hydrocarbon derivatives during the processes of fungal fermentation ultimately yielding preparative amounts of volatile organic substances (VOCs). Trapping materials tested in the column were Carbotrap materials A and B (Supelco) as well as bentonite-shale from the oil bearing areas of Eastern Montana, the former allowed for the effective and efficient trapping of VOCs from purged cultures of Hypoxylon sp. Trapping efficiencies of various materials were measured by both gravimetric as well as proton transfer reaction mass spectroscopy with the Carbotraps A and B being 99% efficient when tested with known amounts of 1,8-cineole. Trapped fungal VOCs could effectively be removed and recovered via controlled heating of the stainless steel column followed by passage of the gases through a liquid nitrogen trap at a recovery rate of ca 65-70%. This method provides for the recovery of mg quantities of compounds normally present in the gas phase that may be needed for spectroscopy, bioassays and further separation and analysis and may have wide applicability for many other biological systems involving VOCs. Other available Carbotraps could be used for other applications. © Springer Science+Business Media B.V. 2011

  9. Trace Metals and Volatile Aromatic Hydrocarbon Content of ...

    African Journals Online (AJOL)

    Michael Horsfall

    knowledge of this hydrocarbon and non hydrocarbon contents and their behaviour when discharged on shore is very useful in the decontamination and effective management of the affected environment. (Osuji and. Achugasim, 2007). An important group of the hydrocarbon content of crude oil is the Benzene Toluene.

  10. Versatility of hydrocarbon production in cyanobacteria.

    Science.gov (United States)

    Xie, Min; Wang, Weihua; Zhang, Weiwen; Chen, Lei; Lu, Xuefeng

    2017-02-01

    Cyanobacteria are photosynthetic microorganisms using solar energy, H2O, and CO2 as the primary inputs. Compared to plants and eukaryotic microalgae, cyanobacteria are easier to be genetically engineered and possess higher growth rate. Extensive genomic information and well-established genetic platform make cyanobacteria good candidates to build efficient biosynthetic pathways for biofuels and chemicals by genetic engineering. Hydrocarbons are a family of compounds consisting entirely of hydrogen and carbon. Structural diversity of the hydrocarbon family is enabled by variation in chain length, degree of saturation, and rearrangements of the carbon skeleton. The diversified hydrocarbons can be used as valuable chemicals in the field of food, fuels, pharmaceuticals, nutrition, and cosmetics. Hydrocarbon biosynthesis is ubiquitous in bacteria, yeasts, fungi, plants, and insects. A wide variety of pathways for the hydrocarbon biosynthesis have been identified in recent years. Cyanobacteria may be superior chassis for hydrocabon production in a photosynthetic manner. A diversity of hydrocarbons including ethylene, alkanes, alkenes, and terpenes can be produced by cyanobacteria. Metabolic engineering and synthetic biology strategies can be employed to improve hydrocarbon production in cyanobacteria. This review mainly summarizes versatility and perspectives of hydrocarbon production in cyanobacteria.

  11. Volatile compounds in meat and meat products

    Directory of Open Access Journals (Sweden)

    Monika KOSOWSKA

    Full Text Available Abstract Meaty flavor is composed of a few hundreds of volatile compounds, only minor part of which are responsible for the characteristic odor. It is developed as a result of multi-directional reactions proceeding between non-volatile precursors contained in raw meat under the influence of temperature. The volatile compounds are generated upon: Maillard reactions, lipid oxidation, interactions between Maillard reaction products and lipid oxidation products as well as upon thiamine degradation. The developed flavor is determined by many factors associated with: raw material (breed, sex, diet and age of animal, conditions and process of slaughter, duration and conditions of meat storage, type of muscle, additives applied and the course of the technological process. The objective of this review article is to draw attention to the issue of volatile compounds characteristic for meat products and factors that affect their synthesis.

  12. Volatile products controlling Titan's tholins production

    KAUST Repository

    Carrasco, Nathalie

    2012-05-01

    A quantitative agreement between nitrile relative abundances and Titan\\'s atmospheric composition was recently shown with a reactor simulating the global chemistry occurring in Titan\\'s atmosphere (Gautier et al. [2011]. Icarus, 213, 625-635). Here we present a complementary study on the same reactor using an in situ diagnostic of the gas phase composition. Various initial N 2/CH 4 gas mixtures (methane varying from 1% to 10%) are studied, with a monitoring of the methane consumption and of the stable gas neutrals by in situ mass spectrometry. Atomic hydrogen is also measured by optical emission spectroscopy. A positive correlation is found between atomic hydrogen abundance and the inhibition function for aerosol production. This confirms the suspected role of hydrogen as an inhibitor of heterogeneous organic growth processes, as found in Sciamma-O\\'Brien et al. (Sciamma-O\\'Brien et al. [2010]. Icarus, 209, 704-714). The study of the gas phase organic products is focussed on its evolution with the initial methane amount [CH 4] 0 and its comparison with the aerosol production efficiency. We identify a change in the stationary gas phase composition for intermediate methane amounts: below [CH 4] 0=5%, the gas phase composition is mainly dominated by nitrogen-containing species, whereas hydrocarbons are massively produced for [CH 4] 0>5%. This predominance of N-containing species at lower initial methane amount, compared with the maximum gas-to solid conversion observed in Sciamma-O\\'Brien et al. (2010) for identical methane amounts confirms the central role played by N-containing gas-phase compounds to produce tholins. Moreover, two protonated imines (methanimine CH 2NH and ethanamine CH 3CHNH) are detected in the ion composition in agreement with Titan\\'s INMS measurements, and reinforcing the suspected role of these chemical species on aerosol production. © 2012 Elsevier Inc.

  13. Isolation and screening of black fungi as degraders of volatile aromatic hydrocarbons

    NARCIS (Netherlands)

    Isola, D.; Selbmann, L.; de Hoog, G.S.; Fenice, M.; Onofri, S.; Prenafeta-Boldu, F.X.; Zucconi, L.

    2013-01-01

    Black fungi reported as degraders of volatile aromatic compounds were isolated from hydrocarbon-polluted sites and indoor environments. Several of the species encountered are known opportunistic pathogens or are closely related to pathogenic species causing severe mycoses, among which are

  14. Isoprene hydrocarbons production upon heterologous transformation of Saccharomyces cerevisiae.

    Science.gov (United States)

    Hong, S-Y; Zurbriggen, A S; Melis, A

    2012-07-01

      Isoprene (2-methyl-1,3-butadiene; C(5) H(8) ) is naturally produced by photosynthesis and emitted in the atmosphere by the leaves of many herbaceous, deciduous and woody plants. Fermentative yeast and fungi (Ascomycota) are not genetically endowed with the isoprene production process. The work investigated whether Ascomycota can be genetically modified and endowed with the property of constitutive isoprene production.   Two different strategies for expression of the IspS gene in Saccharomyces cerevisiae were employed: (i) optimization of codon usage of the IspS gene for specific expression in S. cerevisiae and (ii) multiple independent integrations of the IspS gene in the rDNA loci of the yeast genome. Copy number analysis showed that IspS transgenes were on the average incorporated within about 25% of the endogenous rDNA. Codon use optimization of the Pueraria montana (kudzu vine) IspS gene (SckIspS) for S. cerevisiae showed fivefold greater expression of the IspS protein compared with that of nonoptimized IspS (kIspS). With the strategies mentioned earlier, heterologous expression of the kudzu isoprene synthase gene (kIspS) in S. cerevisiae was tested for stability and as a potential platform of fermentative isoprene production. The multi-copy IspS transgenes were stably integrated and expressed for over 100 generations of yeast cell growth and constitutively produced volatile isoprene hydrocarbons. Secondary chemical modification of isoprene to a number of hydroxylated isoprene derivatives in the sealed reactor was also observed.   Transformation of S. cerevisiae with the Pueraria montana var. lobata (kudzu vine) isoprene synthase gene (IspS) conferred to the yeast cells constitutive isoprene hydrocarbons production in the absence of adverse or toxic effects.   First-time demonstration of constitutive isoprene hydrocarbons production in a fermentative eukaryote operated through the mevalonic acid pathway. The work provides concept validation for the

  15. Forecasting volatility of wind power production

    OpenAIRE

    Zhiwei Shen; Matthias Ritter

    2015-01-01

    Abstract: The increasing share of wind energy in the portfolio of energy sources highlights its uncertainties due to changing weather conditions. To account for the uncertainty in predicting wind power production, this article examines the volatility forecasting abilities of different GARCH-type models for wind power production. Moreover, due to characteristic features of the wind power process, such as heteroscedasticity and nonlinearity, we also investigate the use of a Markov regime-switch...

  16. PRODUCTION OF FLUORINE-CONTAINING HYDROCARBON

    Science.gov (United States)

    Sarsfield, N.F.

    1949-08-01

    This patent relates to improvements in the production of fluorine- containing hydrocarbon derivatives. The process for increasing the degree of fluorination of a fluorochlorohydrocarbon comprises subjecting a highly fluorinated fluorochlorohydrocarbon to the action of a dehydrochlorinating agent, and treating the resulting unsaturated body with fluorine, cobalt trifluoride, or silver difluoride. A number of reagents are known as dehydrochlorinaling agents, including, for example, the caustic alkalies, either in an anhydrous condition or dissolved in water or a lower aliphatic alcohol.

  17. Correlation of levels of volatile versus carcinogenic particulate polycyclic aromatic hydrocarbons in air samples from smokehouses

    DEFF Research Database (Denmark)

    Hansen, Åse Marie; Poulsen, O M; Christensen, J M

    1991-01-01

    In the present study, data on the concentration of polycyclic aromatic hydrocarbons (PAH) in air samples from fish smokehouses (Nordholm et al. 1986) and meat smokehouses (Hansen et al. submitted for publication) were used to analyze the extent to which six different volatile PAH compounds could...... function as markers for the total concentration of six different carcinogenic particulate PAH compounds. Although a significant positive correlation was observed between the concentration of each of six volatile compounds and the total concentration of carcinogenic PAH compounds, a particularly good...... carcinogenic PAH compounds in air samples from smokehouses, whereas fluoranthene and pyrene displayed the highest specificity. However, when the applicability of the six markers was tested on air samples from iron foundries, only naphthalene and pyrene were useful as markers for the carcinogenic compounds...

  18. Supercritical CO2 as a substitute of volatile hydrocarbons; Superkritisch CO2 vervangt vluchtige koolwaterstoffen

    Energy Technology Data Exchange (ETDEWEB)

    Folkerts, G. (ed.)

    2006-05-15

    In many cases supercritical carbon dioxide can replace volatile hydrocarbons in extraction processes. Currently gaseous or liquid CO2 is already used for industrial purification processes, extraction of caffeine from coffee and as a solvent for paint. Although supercritical extraction s a batch process the technique can be applied as a continuous process. [Dutch] In processen waar vluchtige koolwaterstoffen worden ingezet om stoffen te extraheren, biedt superkritisch CO2 een milieuvriendelijk alternatief. Het koolzuur dat zowel in de vloeistof- als gasfase zit, wordt dan ook steeds meer ingezet in extractieprocessen.

  19. Methodology for the detection of contamination by hydrocarbons and further soil sampling for volatile and semi-volatile organic enrichment in former petrol stations, SE Spain

    Directory of Open Access Journals (Sweden)

    Rosa María Rosales Aranda

    2012-01-01

    Full Text Available The optimal detection and quantification of contamination plumes in soil and groundwater by petroleum organic compounds, gasoline and diesel, is critical for the reclamation of hydrocarbons contaminated soil at petrol stations. Through this study it has been achieved a sampling stage optimization in these scenarios by means of the location of potential contamination areas before sampling with the application of the 2D electrical resistivity tomography method, a geophysical non destructive technique based on resistivity measurements in soils. After the detection of hydrocarbons contaminated areas, boreholes with continuous coring were performed in a petrol station located in Murcia Region (Spain. The drillholes reached depths down to 10 m and soil samples were taken from each meter of the drilling. The optimization in the soil samples handling and storage, for both volatile and semi-volatile organic compounds determinations, was achieved by designing a soil sampler to minimize volatilization losses and in order to avoid the manual contact with the environmental samples during the sampling. The preservation of soil samples was performed according to Europe regulations and US Environmental Protection Agency recommendations into two kinds of glass vials. Moreover, it has been taken into account the determination techniques to quantify the hydrocarbon pollution based on Gas Chromatography with different detectors and headspace technique to reach a liquid-gas equilibrium for volatile analyses.

  20. Volatile Sulfur Compounds from Livestock Production

    DEFF Research Database (Denmark)

    Kasper, Pernille

    and, thus, odor removal in these systems. In this context, two processes based on the absorptive oxidation of sulfur compounds in trickling filters containing metal catalysts were examined. One process with iron chelated by ethylenediaminetetraacetic acid (EDTA) was shown to remove hydrogen sulfide...... that the original sample composition was significantly impaired due to adsorption and diffusion at the walls of the measuring equipment. Generally, sulfur compounds were best preserved in both olfactometers and sample bags, while carboxylic acids, 4-methylphenol and trimethylamine were found to undergo substantial......Volatile sulfur compounds, i.e. hydrogen sulfide, methanethiol and dimethyl sulfide have been identified as key odorants in livestock production due to their high concentration levels and low odor threshold values. At the same time their removal with abatement technologies based on mass transfer...

  1. Feasibility study for application of the marine coral powder as a novel adsorbent for Volatile Organic Hydrocarbons

    Directory of Open Access Journals (Sweden)

    Alireza Mashkoori

    2015-06-01

    Full Text Available The marine coral has a porous outer surface and it has served in the processes such as water treatment systems, removal of carbon dioxide and adsorption of arsenic. Based on the need for cheap and efficient adsorbents, in sampling, the aim of this study, comparison of the efficiency of marine coral powder and activated charcoal in adsorption of volatile organic hydrocarbons was considered. In this experimental research, a certain concentrations of 8 volatile organic hydrocarbons: (para-Xylene, Chloroform, Carbon tetrachloride, tert-Butanol, Pyridine, Acetone, Ethyl acetate and Diethyl ether was injected into dynamic atmospheric chamber in the NTP (Normal Temperature and Pressure conditions. Air sampling was performed with the tube containing marine coral powder as well as the tube of activated charcoal, based on the standard method of NIOSH (National Institute of Occupational Safety and Health and in the same laboratory conditions. Then samples were injected into the gas Chromatograph apparatus and analytical comparison has been done between the amount of adsorption of hydrocarbons by activated charcoal and coral powder-test and Mann-Whitney were done with SPSS V.20.Findings showed that there was a significant difference between the amount of adsorption of Para-Xylene, carbon tetrachloride, tert-Butanol, Pyridine, acetone and Ethyl acetate hydrocarbons by activated charcoal and coral powder (P<0.05(. The amount of hydrocarbons adsorption by activated charcoal was, more than coral powder significantly (P<0.001. Based on the present research, in sampling of used hydrocarbons, the marine coral powder was less efficient than the activated charcoal, and it is recommended that more works be designed about other techniques such as coating of the marine coral powder in order to the improvement of adsorption capacity for volatile organic hydrocarbons.

  2. Hydrocarbon composition products of the catalytic recycling plastics waste

    Directory of Open Access Journals (Sweden)

    Zhaksyntay Kairbekov

    2013-09-01

    Full Text Available The paper represents the IR spectroscopy results of the hydrocarbon composition of products, which is obtained from catalytic processing of plastic wastes. The optimal conditions for the hydrogenation with to producny liquid of products are identified.  These liquid products are enriched with aromatics, paraffinic- naphthenic and unsaturated hydrocarbons. The main characteristics of the distillates received by hydrogenation of plastics (as density, refractive index, iodine number, pour point, cloud point, filtering, sulfur content,  fractional and composition of the hydrocarbon group.

  3. Production of hydrocarbons by Aspergillus carbonarius ITEM 5010.

    Science.gov (United States)

    Sinha, Malavika; Sørensen, Annette; Ahamed, Aftab; Ahring, Birgitte Kiær

    2015-04-01

    The filamentous fungus, Asperigillus carbonarius, is able to produce a series of hydrocarbons in liquid culture using lignocellulosic biomasses, such as corn stover and switch grass as carbon source. The hydrocarbons produced by the fungus show similarity to jet fuel composition and might have industrial application. The production of hydrocarbons was found to be dependent on type of media used. Therefore, ten different carbon sources (oat meal, wheat bran, glucose, carboxymethyl cellulose, avicel, xylan, corn stover, switch grass, pretreated corn stover, and pretreated switch grass) were tested to identify the maximum number and quantity of hydrocarbons produced. Several hydrocarbons were produced include undecane, dodecane, tetradecane, hexadecane 2,4-dimethylhexane, 4-methylheptane, 3-methyl-1-butanol, ethyl benzene, o-xylene. Oatmeal was found to be the carbon source resulting in the largest amounts of hydrocarbon products. The production of fungal hydrocarbons, especially from lignocellulosic biomasses, holds a great potential for future biofuel production whenever our knowledge on regulators and pathways increases. Copyright © 2015 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

  4. Observations of nonmethane hydrocarbons and oxygenated volatile organic compounds at a rural site in the southeastern United States

    Energy Technology Data Exchange (ETDEWEB)

    Riemer, Daniel; Pos, Willer; Milne, Peter; Farmer, Charlesk; Zika, Rod [Division of Marine and Atmospheric Chemistry, Rosenstiel School of Marine and Atmospheric Science, University of Miami, Miami, Florida (United States)] [Atmospheric Chemistry Division, National Center for Atmospheric Research, Boulder, Colorado (United States)] [Atmospheric Sciences, Tennessee Valley Authority, Muscle Shoals, Alabama (United States)] Apel, Eric [Atmospheric Chemistry Group, Mantech Environmental Research Triangle Park, North Carolina (United States)] Olszyna, Ken [National Environmental Research Laboratory, U.S. EPA. Research Triangle Park, North Carolina (United States)] Kliendienst, Tad [Department of Chemistry, Western Michigan University, Kalamazoo, Michigan (United States)] Lonneman, William [Departments of Chemistry, and Earth and Atmospheric Science, Purdue University, West Lafayette, Indiana (United States); Shepson, Paul; Starn, Tim

    1998-11-01

    Measurements of an extensive range of nonmethane hydrocarbons (NMHCs) including alkanes, alkenes, and aromatics, and oxygenated volatile organic compounds (OVOCs) including alcohols, ketones, and aldehydes were conducted for several weeks during the summer of 1995 as part of the Southern Oxidants Study (SOS) at a rural experimental site (Youth, Inc.) 32 km southeast of Nashville, Tennessee, in the southeastern United States. These measurements were conducted to (1) determine the absolute magnitude and variability of oxygenated compounds found in a contemporary rural region; (2) assess the importance of the measured ambient levels of OVOCs on a photochemical reactivity basis relative to the more commonly determined NMHCs; and (3) to evaluate our ability to accurately measure oxygenates by the current techniques employed under a field study scenario. Several other physical (temperature, insolation, etc.), meteorological (wind velocity, wind direction, atmospheric structure, and boundary layer height), and chemical (criterion pollutants, NO{sub x}, SO{sub 2}, CO, O{sub 3}, etc.) parameters were measured concurrently with the NMHC and OVOC measurements. During the study period, OVOCs were consistently the dominant compounds present, and methanol and acetone had the highest mixing ratios. Although OVOCs made up the majority of the volatile organic compound component on a mass basis, a substantial sink for OH was isoprene and its immediate oxidation products, methacrolein and methyl vinyl ketone. In combination with CO and formaldehyde, these compounds comprised about 85{percent} of the observed OH reactivity at the site. Acetaldehyde and methanol were responsible for an additional 10{percent}, with the NMHCs and remaining OVOCs making up the final 5{percent} of the measured OH reactivity at the site. These observed patterns reinforce recent studies which find OVOCs to be an important component of the rural troposphere. {copyright} 1998 American Geophysical Union

  5. Derivation of validated methods of sampling and analysis for intermediate and final products of the anaerobic material utilization of volatile chlorinated hydrocarbons (LCFC) in groundwater in the context of analyses of contaminated soils; Ableitung validierter Probenahme- und Analysenmethoden fuer Zwischen- und Endprodukte der anaeroben Stoffverwertungsprozesse von Leichtfluechtigen Chlorierten Kohlenwasserstoffen (LCKW) im Grundwasser im Rahmen von Altlastenuntersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Dorgerloh, Ute; Becker, Roland; Win, Tin [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany); Theissen, Hubert [IMAGO GbR (Germany)

    2010-06-17

    The results of the project ''Methods of sampling and analysis of intermediate and final products of the anaerobic degradation of volatile halogenated hydrocarbons in groundwater in frame of analysis of contaminated sites'' of the German Federal States Program ''Water, Soil, Waste'' (Laenderfinanzierungsprogramm ''Wasser, Boden, Luft'') LFP B2.08 are presented in these report. Different methods of sampling and analysis for the determination of hydrogen, methane, ethene and vinyl chloride in groundwater are developed and validated: For the sampling are described and discussed: i. active sampling: purge and sample of water samples and purging of solvated gases in groundwater in gas sampling tubes ii. passive sampling: diffusion sampling in polyethylene diffusion bags (PDB) and plastic syringes as diffusion sampler for solvated gases The use of active (purge and sample, downhole sampler) and passive (diffusion sampling) sampling techniques for the quantification of VOC, ethene, and methane are evaluated from the viewpoint of public authorities and regarding the reproducibility of measurement results. Based on a groundwater contaminated with trichloroethene, 1,2-dichloroethene, and vinyl chloride it is shown that passive sampling is restricted by low groundwater flow and biological activity inside the well casing. Therefore, active sampling is to be preferred in case of unknown or insufficient flow conditions in the aquifer. The methods of chromatography for the determination of the compounds are validated and compared with other appropriate analytical methods: I. Headspace-GC-FID for the determination of methane, ethene and vinyl chloride in water of the purged sample (i) and the water of the PDB (ii) II. Direct injection - GC-PDD for the determination of hydrogen from the collected gas samples of the gas sampling tube (i) and the plastic syringes (ii) The gas chromatographic procedure for vinyl chloride using

  6. Speciation of volatile aromatic and chlorinated hydrocarbons in an urban atmosphere using TCT-GC/MS.

    Science.gov (United States)

    Baroja, O; Rodríguez, E; de Balugera, Z Gomez; Goicolea, A; Unceta, N; Sampedro, C; Alonso, A; Barrio, R J

    2005-01-01

    Several aromatic and chlorinated volatile hydrocarbons (VOCs) were measured in Vitoria-Gasteiz City (Spain) throughout the years 1999 and 2002 in order to find out the concentration of these pollutants in urban air. These VOCs were retained in Tenax TA, subsequently desorpted by using a thermal desorption cold trap injector (TCT), and thereafter analyzed by gas chromatography/mass spectrometry (GC/MS). This analytical methodology permits the determination of 42 VOCs at very low concentrations, although only 32 of them were found in the urban air of the city (ranging from 205.51 to 0.01 microg m(-3)), with high reproducibility (%RSD lower than 10%). Twenty-four-hour samples were taken each sampling day to ascertain their total daily concentration, and rigorous quality controls were carried out to check the representativeness of sampling. Results of this exhaustive study show that toluene (T), xylenes (X), ethylbenzene (E), and benzene (B) were, respectively, the most abundant of these VOCs in the urban area during that period. The total concentration of BTEX represented, on average, more than 72.6% of the VOC total concentration, with the highest concentrations being reached in autumn, except for benzene and derived compounds (in winter). Benzene was the minority BTEX pollutant, its yearly mean concentration being less than the maximum established by the European Directive 2000/69/CE (5 microg m(-3)).

  7. Monitoring of polyaromatic hydrocarbons and volatile organic compounds in two major traffic tunnels in Seoul, Korea.

    Science.gov (United States)

    Kim, Ki-Hyun; Anthwal, Ashish; Park, Chan Goo; Job, Suk-Joo; Chae, Young-Zoo; Park, Jin-A; Jung, Jong Heub; Sohn, Jong Ryeul; Oh, Jong-Min

    2012-09-01

    To describe the fundamental aspects of air quality in tunnel environments, field campaigns were conducted to measure polycyclic aromatic hydrocarbons (PAHs), volatile organic compounds (VOCs), and some criteria pollutants from two tunnel sites of Nam San (NS) and Hong Ji (HJ) gates in Seoul, Korea. The total PAH values (ngm(-3)) for the NS tunnel (137.8 +/- 10.9) were notably higher than the HJ counterpart (91.3 +/- 7.82), while the total VOC exhibited a reversed pattern with a notable enhancement in the HJ tunnel (178.5 +/- 174.7 ppbC) relative to the NS tunnel (112.5 +/- 64.1 ppbC). A line of evidence, including the molecular diagnostic ratios of PAHs, indicates the relative dominance of diesel vehicles in the NS tunnel compared to the HJ site. The PAHs with high ring numbers (n > 6, such as benzo(g, h, i)perylene and indeno(1,2,3-cd)pyrene) were preferentially enriched in the particle phase, whereas their low ring number counterparts (n = 2-3) were in the gas phase. The results of our study suggest the possibility that the relative source processes for each tunnel site are characterized by the relative dominance of either diesel (NS) or gasoline-powered vehicles (HJ).

  8. Volatile Short-chain Chlorinated Hydrocarbons in the Groundwater of the City of Zagreb

    Directory of Open Access Journals (Sweden)

    Marijanović-Rajčić, M.

    2008-01-01

    Full Text Available The aim of the study was to assess the quality of the groundwater sampled from private wells and the public water-supply system in terms of estimating the contamination caused by short-chain chlorinated hydrocarbons, as well as to estimate the exposure of the citizens dwelling in different suburbs to these pollutants of their drinking water (Fig. 1. The aim of the study was also to determine which suburb is supplied through the public water-supply system with water originating from the Sašnak spring that is contaminated with volatile chlorinated short-chain hydrocarbons.Drinking water samples were taken from 3 private wells and 1 public water-supply system situated in 3 Zagreb suburbs - Pešćenica, Trnje, and Trešnjevka. The sampling was carried out during 2003 and was undertaken on a seasonal basis. Short-chain chlorinated hydrocarbons - 1,1,1-trichloroethane, carbon tetrachloride, 1,1,2-trichloroethene and 1,1,2,2-tetrachloroethene - were determined by gas chromatography, following "liquid-liquid extraction" in pentane. For that purpose, we applied the gas chromatograph equipped with an electron-capture detector, thermo-programmable operations, and a suitable capillary column. The technique applied was that of split-injection.The groundwater of the City of Zagreb was found to be contaminated with volatile chlorinated hydrocarbons. The concentration level of 1,1,1-trichloroethane, determined in most of the samples, was found to be low (Fig. 2. On the other hand, 1,1,2-trichloroethene was present in all samples in concentrations of about 1 µg l-1- (Fig. 3. Only the drinking water samples taken from private wells in the suburb of Trnje contained somewhat higher mass concentrations of 1,1,1-trichloroethane, with the peak value of 19.03 µg l-1, measured in the winter season. In the samples taken from private wells in Trnje, the mass concentrations of 1,1,2,2-tetrachloroethene rangedfrom 15.30 µg l-1 to 18.65 µg l-1, as measured in autumn

  9. Synthesis and Characterization of Quaternary Metal Chalcogenide Aerogels for Gas Separation and Volatile Hydrocarbon Adsorption

    KAUST Repository

    Edhaim, Fatimah A.

    2017-11-01

    In this dissertation, the metathesis route of metal chalcogenide aerogel synthesis was expanded by conducting systematic studies between polysulfide building blocks and the 1st-row transition metal linkers. Resulting materials were screened as sorbents for selective gas separation and volatile organic compounds adsorption. They showed preferential adsorption of polarizable gases (CO2) and organic compounds (toluene). Ion exchange and heavy metal remediation properties have also been demonstrated. The effect of the presence of different counter-ion within chalcogel frameworks on the adsorption capacity of the chalcogels was studied on AFe3Zn3S17 (A= K, Na, and Rb) chalcogels. The highest adsorption capacity toward hydrocarbons and gases was observed on Rb based chalcogels. Adopting a new building block [BiTe3]3- with the 1st-row transition metal ions results in the formation of three high BET surface area chalcogels, KCrBiTe3, KZnBiTe3, and KFeBiTe3. The resulting chalcogels showed preferential adsorption of toluene vapor, and remarkable selectivity of CO2, indicating the potential future use of chalcogels in adsorption-based gas or hydrocarbon separation processes. The synthesis and characterization of the rare earth chalcogels NaYSnS4, NaGdSnS4, and NaTbSnS4 are also reported. Rare earth metal ions react with the thiostannate clusters in formamide solution forming extended polymeric networks by gelation. Obtained chalcogels have high BET surface areas, and showed notable adsorption capacity toward CO2 and toluene vapor. These chalcogels have also been engaged in the absorption of different organic molecules. The results reveal the ability of the chalcogels to distinguish among organic molecules on their electronic structures; hence, they could be used as sensors. Furthermore, the synthesis of metal chalcogenide aerogels Co0.5Sb0.33MoS4 and Co0.5Y0.33MoS4 by the sol-gel method is reported. In this system, the building blocks [MoS4]2- chelated with Co2+ and (Sb3

  10. Mineral oil and synthetic hydrocarbons in cosmetic lip products.

    Science.gov (United States)

    Niederer, M; Stebler, T; Grob, K

    2016-04-01

    Lipsticks and lip care products may contain saturated hydrocarbons which either stem from mineral oil saturated hydrocarbons (MOSH) or are synthetic, that is polyolefin oligomeric saturated hydrocarbons (POSH). Some of these hydrocarbons are strongly accumulated and form granulomas in human tissues, which prompted Cosmetics Europe (former Colipa) to issue a recommendation for their use in lip care and oral products. From 2012 to 2014, MOSH+POSH were determined in 175 cosmetic lip products taken from the Swiss market in order to estimate their contribution to human exposure. Mineral oil saturated hydrocarbons and POSH were extracted and analysed by GC with FID. Areas were integrated as a total as well as by mass ranges with cuts at n-C25 and n-C34 to characterize the molecular mass distribution. About 68% of the products contained at least 5% MOSH+POSH (total concentration). For regular users, these products would be major contributors to their MOSH+POSH exposure. About 31% of the products contained more than 32% MOSH+POSH. Their regular usage would amount in an estimated MOSH+POSH exposure exceeding the highest estimated dietary exposure. The majority of the products contained hydrocarbons with a molecular mass range which was not in line with the recommendations of Cosmetics Europe. Taking into account that material applied to the lips largely ends up being ingested, MOSH and POSH levels should be reduced in the majority of cosmetic lip products. As the extensive evaluation of the data available on MOSH (EFSA J., 10, 2012, 2704) did not enable the specification of limits considered as safe, the present level of dietary exposure and its evaluation as 'of potential concern' provide the relevant bench mark, which means that lip products should contain clearly less than 5% MOSH+POSH. © 2015 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

  11. Site-specific probabilistic ecological risk assessment of a volatile chlorinated hydrocarbon-contaminated tidal estuary.

    Science.gov (United States)

    Hunt, James; Birch, Gavin; Warne, Michael St J

    2010-05-01

    Groundwater contaminated with volatile chlorinated hydrocarbons (VCHs) was identified as discharging to Penrhyn Estuary, an intertidal embayment of Botany Bay, New South Wales, Australia. A screening-level hazard assessment of surface water in Penrhyn Estuary identified an unacceptable hazard to marine organisms posed by VCHs. Given the limitations of hazard assessments, the present study conducted a higher-tier, quantitative probabilistic risk assessment using the joint probability curve (JPC) method that accounted for variability in exposure and toxicity profiles to quantify risk (delta). Risk was assessed for 24 scenarios, including four areas of the estuary based on three exposure scenarios (low tide, high tide, and both low and high tides) and two toxicity scenarios (chronic no-observed-effect concentrations [NOEC] and 50% effect concentrations [EC50]). Risk (delta) was greater at low tide than at high tide and varied throughout the tidal cycle. Spatial distributions of risk in the estuary were similar using both NOEC and EC50 data. The exposure scenario including data combined from both tides was considered the most accurate representation of the ecological risk in the estuary. When assessing risk using data across both tides, the greatest risk was identified in the Springvale tributary (delta=25%)-closest to the source area-followed by the inner estuary (delta=4%) and the Floodvale tributary (delta=2%), with the lowest risk in the outer estuary (delta=0.1%), farthest from the source area. Going from the screening level ecological risk assessment (ERA) to the probabilistic ERA changed the risk from unacceptable to acceptable in 50% of exposure scenarios in two of the four areas within the estuary. The probabilistic ERA provided a more realistic assessment of risk than the screening-level hazard assessment. Copyright (c) 2010 SETAC.

  12. Production of volatile Sulphides in Allium Porrum cell cultures

    OpenAIRE

    Asghari Gh.R; Lockwood GB; Houshfar Gh.A "

    2002-01-01

    Production of volatile sulphides in cell cultures of Allium porrum is described. Allium porrum calluses were initiated from whole seedlings. The high growth rate of Allium porrum callus was achived in Murashige and Skoog media containing only 1 ppm 2, 4-Dichlorophenoxy acetic acid. The routine method of solvent extraction of volatile sulphides was used for Allium porrum and the concentrated extract was subjected to capillary GC and GC-MS. Dipropyl disulphide and 4-methyl thiazolethanol were i...

  13. Polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs) mitigation in the pyrolysis process of waste tires using CO₂ as a reaction medium.

    Science.gov (United States)

    Kwon, Eilhann E; Oh, Jeong-Ik; Kim, Ki-Hyun

    2015-09-01

    Our work reported the CO2-assisted mitigation of PAHs and VOCs in the thermo-chemical process (i.e., pyrolysis). To investigate the pyrolysis of used tires to recover energy and chemical products, the experiments were conducted using a laboratory-scale batch-type reactor. In particular, to examine the influence of the CO2 in pyrolysis of a tire, the pyrolytic products including C1-5-hydrocarbons (HCs), volatile organic carbons (VOCs), and polycyclic aromatic hydrocarbons (PAHs) were evaluated qualitatively by gas chromatography (GC) with mass spectroscopy (MS) as well as with a thermal conductivity detector (TCD). The mass balance of the pyrolytic products under various pyrolytic conditions was established on the basis of their weight fractions of the pyrolytic products. Our experimental work experimentally validated that the amount of gaseous pyrolytic products increased when using CO2 as a pyrolysis medium, while substantially altering the production of pyrolytic oil in absolute content (7.3-17.2%) and in relative composition (including PAHs and VOCs). Thus, the co-feeding of CO2 in the pyrolysis process can be considered an environmentally benign and energy efficient process. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Volatile fatty acid production in the grey duiker, Sylvicapra grimmia

    African Journals Online (AJOL)

    Volatile fatty acid production was studied in the rumen and caecum of culled grey duiker (Sylvicapra grimmial and in the rumen of tame fistulated duikers. The caecum had a higher total VFA concentration and production rate per unit volume than the rumen but when considering total volume the caecum was only 14-17% of ...

  15. Direct production of fractionated and upgraded hydrocarbon fuels from biomass

    Science.gov (United States)

    Felix, Larry G.; Linck, Martin B.; Marker, Terry L.; Roberts, Michael J.

    2014-08-26

    Multistage processing of biomass to produce at least two separate fungible fuel streams, one dominated by gasoline boiling-point range liquids and the other by diesel boiling-point range liquids. The processing involves hydrotreating the biomass to produce a hydrotreatment product including a deoxygenated hydrocarbon product of gasoline and diesel boiling materials, followed by separating each of the gasoline and diesel boiling materials from the hydrotreatment product and each other.

  16. Electron microscopy of hydrocarbon production in parthenium argentatum (guayule)

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Thomas E. [Univ. of California, Berkeley, CA (United States)

    1977-11-01

    The electron microscope was used to study the biological processes involved in hydrocarbon production. The little desert shrub Guayule (Parthenium argentatum) was selected for study. This shrub can produce hydrocarbons (rubber) in concentrations up to 1/4 of its dry weight. It grows on semi-arid land and has been extensively studied. The potential of Guayule is described in detail. Results of an investigation into the morphology of Guayule at the electron microscope level are given. Experiments, which would allow the biosynthesis of hydrocarbon in Guayule to be followed, were designed. In order to do this, knowledge of the biochemistry of rubber formation was used to select a tracer, mevalonic acid. Mevalonic acid is the precursor of all the terpenoids, a large class of hydrocarbons which includes rubber. It was found that when high enough concentrations of mevalonic acid are administered to seedling Guayule plants, build-ups of metabolized products are found within the chloroplasts of the seedlings. Also, tritium labeled mevalonic acid was used as a precursor, and its metabolic progress was followed by using the technique of electron microscope autoradiography. The results of these experiments also implicated chloroplasts of the Guayule plant in hydrocarbon production. The final task was the development of a system to produce three-dimensional stereo reconstructions of organelles suspected of involvement in hydrocarbon biosynthesis in Guayule. The techniques are designed to reconstruct an object from serial sections of that object. The techniques use stereo imaging both to abstract information for computer processing, and also in the computer produced reconstruction.

  17. Review of current research on hydrocarbon production by plants

    Energy Technology Data Exchange (ETDEWEB)

    Benedict, H. M.; Inman, B.

    1979-01-01

    This review assesses the status of research and development in the area of plants that produce hydrocarbons as a possible replacement for traditional fossil fuels. The information is meant to be used as a basis for determining the scope of a possible R and D program by DOE/FFB. Except in the case of guayule (Parthenium argentatum Gray), research on hydrocarbon species generally has not advanced beyond preliminary screening, extraction, and growth studies. Virtually no field studies have been initiated; hydrocarbon component extraction, separation, identification, and characterization have been only timidly approached; the biochemistry of hydrocarbon formation remains virtually untouched; and potential market analysis has been based on insufficient data. Research interest is increasing in this area, however. Industrial interest understandably centers about guayule prospects and is supplemented by NSF and DOE research funds. Additional support for other research topics has been supplied by DOE and USDA and by certain university systems. Due to the infant state of technology in this area of energy research, it is not possible to predict or satisfactorily assess at this time the potential contribution that plant hydrocarbons might make toward decreasing the nation's dependence upon petroleum. However, the general impression received from experts interviewed during this review was that the major thrust of research should be directed toward the manufacture of petrochemical substitutes rather than fuel production.

  18. Volatile compounds of maari, a fermented product from baobab ...

    African Journals Online (AJOL)

    The volatile compounds associated with baobab seeds fermentation for Maari production were extracted and analysed by Likens-Nickerson simultaneous steam distillation-extraction method and gas chromatography-mass spectrometry (GC-MS), respectively. Furthermore, the titratable acidity, tannin content and proximate ...

  19. Production of volatile Sulphides in Allium Porrum cell cultures

    Directory of Open Access Journals (Sweden)

    "Asghari Gh.R

    2002-09-01

    Full Text Available Production of volatile sulphides in cell cultures of Allium porrum is described. Allium porrum calluses were initiated from whole seedlings. The high growth rate of Allium porrum callus was achived in Murashige and Skoog media containing only 1 ppm 2, 4-Dichlorophenoxy acetic acid. The routine method of solvent extraction of volatile sulphides was used for Allium porrum and the concentrated extract was subjected to capillary GC and GC-MS. Dipropyl disulphide and 4-methyl thiazolethanol were identified in A. porrum aggregated suspension cells.

  20. Solvent desorption dynamic headspace sampling of fermented dairy product volatiles.

    Science.gov (United States)

    Rankin, S A

    2001-01-01

    A method was developed based on solvent desorption dynamic headspace analysis for the identification and relative quantification of volatiles significant to the study of fermented dairy product aroma. Descriptions of applications of this method are presented including the measurement of diacetyl and acetoin in fermented milk, the evaluation of volatile-hydrocolloid interactions in dairy-based matrices, and the identification of volatiles in cheeses for canonical discriminative analysis. Advantages of this method include rapid analysis, minimal equipment investment, and the ability to analyze samples with traditional GC split/splitless inlet systems. Limitations of this method are that the sample must be in the liquid state and the inherent analytical limitation to those compounds that do not coelute with the solvent or solvent impurity peaks.

  1. Thermocatalytic CO2-Free Production of Hydrogen from Hydrocarbon Fuels

    Energy Technology Data Exchange (ETDEWEB)

    University of Central Florida

    2004-01-30

    The main objective of this project is the development of an economically viable thermocatalytic process for production of hydrogen and carbon from natural gas or other hydrocarbon fuels with minimal environmental impact. The three major technical goals of this project are: (1) to accomplish efficient production of hydrogen and carbon via sustainable catalytic decomposition of methane or other hydrocarbons using inexpensive and durable carbon catalysts, (2) to obviate the concurrent production of CO/CO{sub 2} byproducts and drastically reduce CO{sub 2} emissions from the process, and (3) to produce valuable carbon products in order to reduce the cost of hydrogen production The important feature of the process is that the reaction is catalyzed by carbon particulates produced in the process, so no external catalyst is required (except for the start-up operation). This results in the following advantages: (1) no CO/CO{sub 2} byproducts are generated during hydrocarbon decomposition stage, (2) no expensive catalysts are used in the process, (3) several valuable forms of carbon can be produced in the process depending on the process conditions (e.g., turbostratic carbon, pyrolytic graphite, spherical carbon particles, carbon filaments etc.), and (4) CO{sub 2} emissions could be drastically reduced (compared to conventional processes).

  2. Liquid biofuel production from volatile fatty acids

    NARCIS (Netherlands)

    Steinbusch, K.J.J.

    2010-01-01

    The production of renewable fuels and chemicals reduces the dependency on fossil fuels and limits the increase of CO2 concentration in the atmosphere only if a sustainable feedstock and an energy efficient process are used. The thesis assesses the possibility to use municipal and industrial waste as

  3. Federal Environmental Regulations Impacting Hydrocarbon Exploration, Drilling, and Production Operations

    Energy Technology Data Exchange (ETDEWEB)

    Carroll, Herbert B.; Johnson, William I.

    1999-04-27

    Waste handling and disposal from hydrocarbon exploration, drilling, and production are regulated by the US Environmental Protection Agency (EPA) through federal and state regulations and/or through implementation of federal regulations. Some wastes generated in these operations are exempt under the Resource Conservation and Recovery Act (RCRA) but are not exempt under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), Superfund Amendments and Reauthorization Act (SARA), and other federal environmental laws. Exempt wastes remain exempt only if they are not mixed with hazardous wastes or hazardous substances. Once mixture occurs, the waste must be disposed as a hazardous material in an approved hazardous waste disposal facility. Before the Clean Air Act as amended in 1990, air emissions from production, storage, steam generation, and compression facilities associated with hydrocarbon exploration, drilling, and production industry were not regulated. A critical proposed regulatory change which will significantly effect Class II injection wells for disposal of produced brine and injection for enhanced oil recovery is imminent. Federal regulations affecting hydrocarbon exploration, drilling and production, proposed EPA regulatory changes, and a recent significant US Court of Appeals decision are covered in this report. It appears that this industry will, in the future, fall under more stringent environmental regulations leading to increased costs for operators.

  4. Land subsidence associated with hydrocarbon production, Texas Gulf Coast

    Energy Technology Data Exchange (ETDEWEB)

    Kreitler, C.W.; White, W.A.; Akhter, M.S.

    1988-01-01

    Although ground-water withdrawal has been the predominant cause of land subsidence in the Texas Gulf Coast, localized subsidence and faulting have also resulted from hydrocarbon production. Subsidence was documented as early as the 1920s over the Goose Creek field. Since then, subsidence and/or faulting have been identified over the Saxet, South Houston, Chocolate Bayou, Hastings, Alco-Mag, Clinton, Mykawa, Blue Ridge, Webster, and Caplen oil fields. Oil-production-related subsidence over these fields generally creates few environmental or engineering problems. One exception is the subsidence and faulting over the Caplen oil field on Bolivar Peninsula, where more than 1,000 ac of saltwater marsh has been replaced by subaqueous flats. Subsidence may be occurring over other fields but has not been identified because of limited releveled benchmark data. An evaluation of drill-stem and bottom-hole pressure data for the Frio Formation in Texas indicates extensive depressurization presumably from hydrocarbon production. Nearly 12,000 measurements from a pressure data base of 17,000 measurements indicate some depressurization. Some of the Frio zones have pressure declines of more than 1,500 psi from original hydrostatic conditions. Subsidence and faulting may be associated with these fields in the Frio as well as other Tertiary formations where extensive hydrocarbon production and subsequent depressurization have occurred.

  5. The effects of biodiesel and its blends with diesel oil on the emission of volatile aromatic hydrocarbons

    Directory of Open Access Journals (Sweden)

    Adam Prokopowicz

    2013-12-01

    Full Text Available Background: In recent times, the emphasis is placed on the use of renewable fuels as well as biodiesel as an attractive alternative to conventional diesel fuel. Due to the fact that the impact of biodiesel on various chemical compounds exhaust emissions is not completely characterized, we have evaluated the emissions of volatile aromatic hydrocarbons in relation to biodiesel content in conventional diesel fuel. Material and methods: In the study we have assessed the emission of benzene, toluene, ethylbenzene and xylens during New European Driving Cycle NEDC for a passenger car with a diesel engine using the following fuels: 100% diesel fuel (B0, 100% rapeseed methyl esters (B100, 7, 15 and 30% rapeseed methyl esters in diesel fuel (B7, B15, B30, and 30% hydrotreated vegetable oil in diesel fuel (HVO30. Results: Among all determined compounds, benzene and toluene were emitted in the largest quantities. Higher emissions were determined during urban driving cycle then during extraurban driving cycle. A clear trend was observed when along with increasing amount of added rapeseed methyl esters the emission increased. However, additive of HVO decreased the emission of the most volatile aromatic compounds even when compared to conventional diesel fuel. During extra-urban driving cycle the emission was significantly lower and comparable for most fuels tested. Nevertheless in the context of conventional diesel fuel, lower emission for fuels with biodiesel was observed. Conclusion: The results have indicated the increase in benzene and toluene exhaust emissions mostly during urban driving cycle and its decrease during extra-urban driving cycle in NEDC test with increasing content of fatty acids methyl esters in diesel fuel. The emission in urban cycle was probably influenced by cold-start condition during this cycle. Generation of volatile aromatic hydrocarbons may be related to higher density of fuel with biodiesel in comparison to density of diesel oil

  6. Investigation of non-volatile additives on the process of distillation of hydrocarbon mixtures

    Directory of Open Access Journals (Sweden)

    М.Б. Степанов

    2009-02-01

    Full Text Available  The given results of researches of influence of nonvolatile additives on processes of distillation of individual hydrocarbons and their mixes, including petroleum and mineral oil. With the help of the developed computer system of the continuous control of distillation it is shown, that at the presence of small amounts of the additive decrease of temperature of the beginning of boiling of hydrocarbons is observed, their speeds of banish and exits of light fuel mineral oil grow during initial oil refining

  7. Sustainable heterologous production of terpene hydrocarbons in cyanobacteria.

    Science.gov (United States)

    Formighieri, Cinzia; Melis, Anastasios

    2016-12-01

    Cyanobacteria can be exploited as photosynthetic platforms for heterologous generation of terpene hydrocarbons with industrial application. However, the slow catalytic activity of terpene synthases (k cat = 4 s-1 or slower) makes them noncompetitive for the pool of available substrate, thereby limiting the rate and yield of product generation. Work in this paper applied transformation technologies in Synechocystis for the heterologous production of β-phellandrene (monoterpene) hydrocarbons. Conditions were defined whereby expression of the β-phellandrene synthase (PHLS), as a CpcB·PHLS fusion protein with the β-subunit of phycocyanin, accounted for up to 20 % of total cellular protein. Moreover, CpcB·PHLS was heterologously co-expressed with enzymes of the mevalonic acid (MVA) pathway and geranyl-diphosphate synthase, increasing carbon flux toward the terpenoid biosynthetic pathway and enhancing substrate availability. These improvements enabled yields of 10 mg of β-phellandrene per g of dry cell weight generated in the course of a 48-h incubation period, or the equivalent of 1 % β-phellandrene:biomass (w:w) carbon-partitioning ratio. The work helped to identify prerequisites for the efficient heterologous production of terpene hydrocarbons in cyanobacteria: (i) requirement for overexpression of the heterologous terpene synthase, so as to compensate for the slow catalytic turnover of the enzyme, and (ii) enhanced endogenous carbon partitioning toward the terpenoid biosynthetic pathway, e.g., upon heterologous co-expression of the MVA pathway, thereby supplementing the native metabolic flux toward the universal isopentenyl-diphosphate and dimethylallyl-diphosphate terpenoid precursors. The two prerequisites are shown to be critical determinants of yield in the photosynthetic CO2 to terpene hydrocarbons conversion process.

  8. Emissions of volatile hydrocarbons (VOC) during drying of sawdust; Utslaepp av laettflyktiga kolvaeten vid torkning av biobraenslen

    Energy Technology Data Exchange (ETDEWEB)

    Granstroem, Karin

    2001-08-01

    In the project 'Emissions of volatile hydrocarbons (VOC) during drying of sawdust' the identity, amount and composition of monoterpenes found in the drying medium of a fluidized bed drier drying sawdust from Norwegian spruce and Scotch pine has been determined. The energy efficiency of the drier has also been measured. The aim of this project was to reduce both emissions and energy required for drying, to minimize environmental and health hazards, and make drying more competitive. This would help our primary target group - small scale saw mills - to make use of the sawdust produced as a by- product by making pellets and briquettes. If the VOC remains in the sawdust its energy content will improve and therefore also its value as a fuel. The sawdust was dried to different moisture levels in a spouted bed drier at atmospheric pressure, using either recirculating or not recirculating drying medium with temperatures 140, 170 or 200 deg C. The emissions of VOC were measured using a flame ionization detector (FID) and the nature of the emissions analyzed with a gas chromatograph with mass spectrometric detector (GC-MS). The GC-MS data is reported as emitted substance per oven dry weight (odw). Experiments show that terpenes do not leave the sawdust in great amounts until it is dried to a moisture content (water/total weight) below 10%. When sawdust is dried to a predetermined moisture level, the terpene emissions increase when warmer incoming drying medium is used. The monoterpenes found in greatest amount are a-pinene, b-pinene, 3-carene, limonene and myrcene. y-terpinene was detected in emissions from pine but not from spruce. The relative amounts of different monoterpenes did not vary significantly with post-drying moisture content, but drying medium of higher temperature caused an increase in the relative amount of less volatile monoterpenes. The FID data is reported as concentration of VOC in the drying medium, and as weight VOC per odw. The concentration

  9. TYPES OF FI SCAL REGIME IN HYDROCARBON EXPLORATION AND PRODUCTION

    Directory of Open Access Journals (Sweden)

    Daria Karasalihović-Sedlar

    2017-01-01

    Full Text Available The choice of the right fi scal regime represents the main object of the energy policy concerning hydrocarbon exploration and production for the state government. For the operator and service companies it represents the terms and conditions for practical conducting of the process in whole. This paper analyse aspects of agreements used in the petroleum indus-try. Elements of agreement, regardless of regime, have been described together with their advantages and disadvantages. Due to the fact that the fi scal regime has to be chosen to attract companies willing to invest in exploration and produc-tion, it represents a relevant part of the business strategy and also a base for the decision making process during start up. It has to minimize the risk for the both parties involved and maximize the state’s share during the exploitation phase. For the companies, it has to be attractive enough to balance risks during the exploration phase with profi ts gained during the exploitation phase. The aim of this paper is to show the existing fi scal systems in the petroleum industry and to analyze the process for concluding a contract regarding the exploration and production of hydrocarbons. An overview of diff er-ent business practices in the oil and gas industry with a detailed breakdown of the contract terms between the parties involved have been described in the paper. The aim of this paper is to show the diff erent possibilities of fi nancial regimes which could help during the negotiation process for conducting hydrocarbon exploration and production for everyone involved.

  10. Atmospheric hydrocarbon emissions and concentrations in the barnett shale natural gas production region.

    Science.gov (United States)

    Zavala-Araiza, Daniel; Sullivan, David W; Allen, David T

    2014-05-06

    Hourly ambient hydrocarbon concentration data were collected, in the Barnett Shale Natural Gas Production Region, using automated gas chromatography (auto-GC), for the period from April 2010 to December 2011. Data for three sites were compared: a site in the geographical center of the natural gas production region (Eagle Mountain Lake (EML)); a rural/suburban site at the periphery of the production region (Flower Mound Shiloh), and an urban site (Hinton). The dominant hydrocarbon species observed in the Barnett Shale region were light alkanes. Analyses of daily, monthly, and hourly patterns showed little variation in relative composition. Observed concentrations were compared to concentrations predicted using a dispersion model (AERMOD) and a spatially resolved inventory of volatile organic compounds (VOC) emissions from natural gas production (Barnett Shale Special Emissions Inventory) prepared by the Texas Commission on Environmental Quality (TCEQ), and other emissions information. The predicted concentrations of VOC due to natural gas production were 0-40% lower than background corrected measurements, after accounting for potential under-estimation of certain emission categories. Hourly and daily variations in observed, background corrected concentrations were primarily explained by variability in meteorology, suggesting that episodic emission events had little impact on hourly averaged concentrations. Total emissions for VOC from natural gas production sources are estimated to be approximately 25,300 tons/yr, when accounting for potential under-estimation of certain emission categories. This region produced, in 2011, approximately 5 bcf/d of natural gas (100 Gg/d) for a VOC to natural gas production ratio (mass basis) of 0.0006.

  11. Oxidation Products of Semi-volatile Alkanes by Hydroxyl Radicals

    Science.gov (United States)

    Zhang, H.; Worton, D. R.; Nah, T.; Goldstein, A. H.; Wilson, K. R.

    2013-12-01

    Alkanes are ubiquitous in the atmosphere and are important components that influence atmospheric chemistry. Semi-volatile alkanes are partitioned between the gas- and the particle-phases and can be readily oxidized in both phases. Previous studies have demonstrated that reaction rates and the products of OH oxidation are very different for organic compounds in the gas- and particle phases. In the present study, n-octadecane (C18H38), n-eicosane (C20H42), n-docosane (C22H46), n-tricosane (C24H50), and n-pentadecylcyclohexane (C21H42) were chosen as model compounds for semi-volatile alkanes to examine their OH-initiated oxidation reactions in a flow tube reactor. OH exposure was varied in the experiments, equivalent to oxidation of up to one week in the atmosphere. Oxidation products were collected on filters and analyzed using two-dimensional gas chromatography coupled to a high-resolution time-of-flight electron impact ionization and vacuum ultraviolet photoionization mass spectrometer. Most of the oxygenated higher molecular weight isomers were separated and quantified. Our results suggest that aerosol samples formed in the n-octadecane experiment were more oxidized than the other model compounds (i.e., functionalization products with three oxygen atoms per molecule compared to two oxygen atoms per molecule) at similar OH exposures and aerosol mass loadings. This is likely due to the concentration of n-octadecane in the gas phase where oxidation is more rapid. We find that the first-generation gas-phase oxidation products quickly partition to the particle phase after which higher-generation oxidation likely occurs in the particle phase. Interestingly, functionalized carbonyl isomers for the normal alkanes were only observed on the 4 carbon positions closest to the molecule end in all cases, which is in contrast to structure-reactivity relationship (SRR) predictions for gas-phase reactions. For n-octadecane, the concentrations of first-generation functionalization

  12. Photosynthetic terpene hydrocarbon production for fuels and chemicals

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X; Ort, DR; Yuan, JS

    2015-01-28

    Photosynthetic hydrocarbon production bypasses the traditional biomass hydrolysis process and represents the most direct conversion of sunlight energy into the next-generation biofuels. As a major class of biologically derived hydrocarbons with diverse structures, terpenes are also valuable in producing a variety of fungible bioproducts in addition to the advanced drop-in' biofuels. However, it is highly challenging to achieve the efficient redirection of photosynthetic carbon and reductant into terpene biosynthesis. In this review, we discuss four major scientific and technical barriers for photosynthetic terpene production and recent advances to address these constraints. Collectively, photosynthetic terpene production needs to be optimized in a systematic fashion, in which the photosynthesis improvement, the optimization of terpene biosynthesis pathway, the improvement of key enzymes and the enhancement of sink effect through terpene storage or secretion are all important. New advances in synthetic biology also offer a suite of potential tools to design and engineer photosynthetic terpene platforms. The systemic integration of these solutions may lead to disruptive' technologies to enable biofuels and bioproducts with high efficiency, yield and infrastructure compatibility.

  13. Preliminary Economics for Hydrocarbon Fuel Production from Cellulosic Sugars

    Energy Technology Data Exchange (ETDEWEB)

    Collett, James R.; Meyer, Pimphan A.; Jones, Susanne B.

    2014-05-18

    Biorefinery process and economic models built in CHEMCAD and a preliminary, genome-scale metabolic model for the oleaginous yeast Lipomyces starkeyi were used to simulate the bioconversion of corn stover to lipids, and the upgrading of these hydrocarbon precursors to diesel and jet fuel. The metabolic model was based on the recently released genome sequence for L. starkeyi and on metabolic pathway information from the literature. The process model was based on bioconversion, lipid extraction, and lipid oil upgrading data found in literature, on new laboratory experimental data, and on yield predictions from the preliminary L. starkeyi metabolic model. The current plant gate production cost for a distillate-range hydrocarbon fuel was estimated by the process model Base Case to be $9.5/gallon ($9.0 /gallon of gasoline equivalent) with assumptions of 2011$, 10% internal return on investment, and 2205 ton/day dry feed rate. Opportunities for reducing the cost to below $5.0/gallon, such as improving bioconversion lipid yield and hydrogenation catalyst selectivity, are presented in a Target Case. The process and economic models developed for this work will be updated in 2014 with new experimental data and predictions from a refined metabolic network model for L. starkeyi. Attaining a production cost of $3.0/gallon will require finding higher value uses for lignin other than power generation, such as conversion to additional fuel or to a co-product.

  14. Photosynthetic terpene hydrocarbon production for fuels and chemicals.

    Science.gov (United States)

    Wang, Xin; Ort, Donald R; Yuan, Joshua S

    2015-02-01

    Photosynthetic hydrocarbon production bypasses the traditional biomass hydrolysis process and represents the most direct conversion of sunlight energy into the next-generation biofuels. As a major class of biologically derived hydrocarbons with diverse structures, terpenes are also valuable in producing a variety of fungible bioproducts in addition to the advanced 'drop-in' biofuels. However, it is highly challenging to achieve the efficient redirection of photosynthetic carbon and reductant into terpene biosynthesis. In this review, we discuss four major scientific and technical barriers for photosynthetic terpene production and recent advances to address these constraints. Collectively, photosynthetic terpene production needs to be optimized in a systematic fashion, in which the photosynthesis improvement, the optimization of terpene biosynthesis pathway, the improvement of key enzymes and the enhancement of sink effect through terpene storage or secretion are all important. New advances in synthetic biology also offer a suite of potential tools to design and engineer photosynthetic terpene platforms. The systemic integration of these solutions may lead to 'disruptive' technologies to enable biofuels and bioproducts with high efficiency, yield and infrastructure compatibility. © 2015 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

  15. Gas chromatographic study of the volatile products from co-pyrolysis of coal and polyethylene wastes.

    Science.gov (United States)

    Domínguez, A; Blanco, C G; Barriocanal, C; Alvarez, R; Díez, M A

    2001-05-18

    The aim of this study was to determine the volatile products distribution of co-processing of coal with two plastic wastes, low-density polyethylene from agriculture greenhouses and high-density polyethylene from domestic uses, in order to explain the observed decrease in coal fluidity caused by polyethylene waste addition. Polymeric materials, although they are not volatile themselves, may be analysed by gas chromatography through the use of pyrolysis experiments. In this way, a series of pyrolysis tests were performed at 400 and 500 degrees C in a Gray-King oven with each of the two plastic wastes, one high-volatile bituminous coal and blends made up of coal and plastic waste (9:1, w/w, ratio). The pyrolysis temperatures, 400 and 500 degrees C, were selected on the basis of the beginning and the end of the coal plastic stage. The organic products evolved from the oven were collected, dissolved in pyridine and analysed by capillary gas chromatography using a flame ionization detector. The analysis of the primary tars indicated that the amount of n-alkanes is always higher than that of n-alkenes and the formation of the alkenes is favoured by increasing the pyrolysis temperature. However, this effect may be influenced by the size of the hydrocarbon. Thus, the fraction C17-C31 showed a higher increase of n-alkenes/n-alkanes ratio than other fractions. On the other hand, the difference between the experimental and estimated values from tars produced from single components was positive for n-alkanes and n-alkenes, indicating that co-pyrolysis of the two materials enhanced the chemical reactivity during pyrolysis and produced a higher conversion than that from individual components.

  16. Volatility

    Directory of Open Access Journals (Sweden)

    María Sánchez

    2016-11-01

    Full Text Available The action consists of moving with small kicks a tin of cola refresh -without Brand-from a point of the city up to other one. During the path I avoid bollards, the slope differences between sidewalks, pedestrians, parked motorcycles, etc. Volatility wants to say exactly that the money is getting lost. That the money is losing by gentlemen and by ladies who are neither financial sharks, nor big businessmen… or similarly, but ingenuous people, as you or as me, who walk down the street.

  17. In-tube extraction for enrichment of volatile organic hydrocarbons from aqueous samples.

    Science.gov (United States)

    Jochmann, Maik A; Yuan, Xue; Schilling, Beat; Schmidt, Torsten C

    2008-02-01

    In-tube extraction (ITEX) is a novel solventless extraction technique in which a headspace syringe with a needle body filled with a sorbent (here: Tenax TA) is used. The analytes are extracted from sample headspace by dynamic extraction. The needle body is surrounded by a separate heater, which is used for thermal desorption of analytes into the injection port of a GC system. We report here for the first time the optimization and evaluation of a fully automated analytical method based on ITEX. As target analytes, 19 common groundwater contaminants such as halogenated volatiles and monoaromatic compounds have been chosen. Method related parameters such as extraction temperature, number of extraction cycles, extraction and desorption volume as well as extraction and desorption flow rates were investigated in detail. The linear dynamic range of the ITEX method ranged over six orders of magnitude between 0.028 microg/L and 1218 microg/L with linear correlation coefficients between 0.990 and 0.998 for the investigated compounds. Method detection limits for monoaromatic compounds were between 28 ng/L (ethylbenzene) and 68 ng/L (1,2,4-trimethylbenzene). For halogenated volatile organic compounds, method detection limits between 48 ng/L (chloroform) and 799 ng/L (dichloromethane) were obtained. The precision of the method with external calibration was between 3.1% (chloroform ethylbenzene) and 7.4% (1,2,3-trimethylbenzene).

  18. Halogenated hydrocarbon pesticides and other volatile organic contaminants provide analytical challenges in global trading.

    Science.gov (United States)

    Budnik, Lygia T; Fahrenholtz, Svea; Kloth, Stefan; Baur, Xaver

    2010-04-01

    Protection against infestation of a container cargo by alien species is achieved by mandatory fumigation with pesticides. Most of the effective fumigants are methyl and ethyl halide gases that are highly toxic and are a risk to both human health and the environment. There is a worldwide need for a reliable and robust analytical screening procedure for these volatile chemicals in a multitude of health and environmental scenarios. We have established a highly sensitive broad spectrum mass spectrometry method combined with thermal desorption gas chromatography to detect, identify and quantify volatile pesticide residues. Using this method, 1201 random ambient air samples taken from freight containers arriving at the biggest European ports of Hamburg and Rotterdam were analyzed over a period of two and a half years. This analytical procedure is a valuable strategy to measure air pollution from these hazardous chemicals, to help in the identification of pesticides in the new mixtures/formulations that are being adopted globally and to analyze expired breath samples after suspected intoxication in biomonitoring.

  19. Volatile Hydrocarbon Analysis in Blood by Headspace Solid-Phase Microextraction: The Interpretation of VHC Patterns in Fire-Related Incidents.

    Science.gov (United States)

    Waters, Brian; Hara, Kenji; Ikematsu, Natsuki; Takayama, Mio; Kashiwagi, Masayuki; Matsusue, Aya; Kubo, Shin-Ichi

    2017-05-01

    A headspace solid-phase microextraction (HS-SPME) technique was used to quantitate the concentration of volatile hydrocarbons from the blood of cadavers by cryogenic gas chromatography-mass spectroscopy. A total of 24 compounds including aromatic and aliphatic volatile hydrocarbons were analyzed by this method. The analytes in the headspace of 0.1 g of blood mixed with 1.0 mL of distilled water plus 1 µL of an internal standard solution were adsorbed onto a 100-µm polydimethylsiloxane fiber at 0°C for 15 min, and measured using a GC-MS full scan method. The limit of quantitation for the analytes ranged from 6.8 to 10 ng per 1 g of blood. This method was applied to actual autopsy cases to quantitate the level of volatile hydrocarbons (VHCs) in the blood of cadavers who died in fire-related incidents. The patterns of the VHCs revealed the presence or absence of accelerants. Petroleum-based fuels such as gasoline and kerosene were differentiated. The detection of C8-C13 aliphatic hydrocarbons indicated the presence of kerosene; the detection of C3 alkylbenzenes in the absence of C8-C13 aliphatic hydrocarbons was indicative of gasoline; and elevated levels of styrene or benzene in the absence of C3/C4 alkylbenzenes and aliphatic hydrocarbons indicated a normal construction fire. This sensitive HS-SPME method could help aid the investigation of fire-related deaths by providing a simple pattern to use for the interpretation of VHCs in human blood. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  20. The pollution characteristics of odor, volatile organochlorinated compounds and polycyclic aromatic hydrocarbons emitted from plastic waste recycling plants.

    Science.gov (United States)

    Tsai, Chung-Jung; Chen, Mei-Lien; Chang, Keng-Fu; Chang, Fu-Kuei; Mao, I-Fang

    2009-02-01

    Plastic waste treatment trends toward recycling in many countries; however, the melting process in the facilities which adopt material recycling method for treating plastic waste may emit toxicants and cause sensory annoyance. The objectives of this study were to analyze the pollution characteristics of the emissions from the plastic waste recycling plants, particularly in harmful volatile organochlorinated compounds, polycyclic aromatic hydrocarbons (PAHs), odor levels and critical odorants. Ten large recycling plants were selected for analysis of odor concentration (OC), volatile organic compounds (VOCs) and PAHs inside and outside the plants using olfactometry, gas chromatography-mass spectrometry and high performance liquid chromatography-fluorescence detector, respectively. The olfactometric results showed that the melting processes used for treating polyethylene/polypropylene (PE/PP) and polyvinyl chloride (PVC) plastic waste significantly produced malodor, and the odor levels at downwind boundaries were 100-229 OC, which all exceeded Taiwan's EPA standard of 50 OC. Toluene, ethylbenzene, 4-methyl-2-pentanone, methyl methacrylate and acrolein accounted for most odors compared to numerous VOCs. Sixteen organochlorinated compounds were measured in the ambient air emitted from the PVC plastic waste recycling plant and total concentrations were 245-553 microg m(-3); most were vinyl chloride, chloroform and trichloroethylene. Concentrations of PAHs inside the PE/PP plant were 8.97-252.16 ng m(-3), in which the maximum level were 20-fold higher than the levels detected from boundaries. Most of these recycling plants simply used filter to treat the melting fumes, and this could not efficiently eliminate the gaseous compounds and malodor. Improved exhaust air pollution control were strongly recommended in these industries.

  1. Volatilization of polycyclic aromatic hydrocarbons from coal-tar-sealed pavement.

    Science.gov (United States)

    Van Metre, Peter C; Majewski, Michael S; Mahler, Barbara J; Foreman, William T; Braun, Christopher L; Wilson, Jennifer T; Burbank, Teresa L

    2012-06-01

    Coal-tar-based pavement sealants, a major source of PAHs to urban water bodies, are a potential source of volatile PAHs to the atmosphere. An initial assessment of volatilization of PAHs from coal-tar-sealed pavement is presented here in which we measured summertime gas-phase PAH concentrations 0.03 m and 1.28 m above the pavement surface of seven sealed (six with coal-tar-based sealant and one with asphalt-based sealant) and three unsealed (two asphalt and one concrete) parking lots in central Texas. PAHs also were measured in parking lot dust. The geometric mean concentration of the sum of eight frequently detected PAHs (ΣPAH(8)) in the 0.03-m samples above sealed lots (1320 ng m(-3)) during the hottest part of the day was 20 times greater than that above unsealed lots (66.5 ng m(-3)). The geometric mean concentration in the 1.28-m samples above sealed lots (138 ng m(-3)) was five times greater than above unsealed lots (26.0 ng m(-3)). Estimated PAH flux from the sealed lots was 60 times greater than that from unsealed lots (geometric means of 88 and 1.4 μg m(-2) h(-1), respectively). Although the data set presented here is small, the much higher estimated fluxes from sealed pavement than from unsealed pavement indicate that coal-tar-based sealants are emitting PAHs to urban air at high rates compared to other paved surfaces. Published by Elsevier Ltd.

  2. Preferential adsorption of volatile hydrocarbons on high surface area chalcogels KMBiTe 3 (M = Cr, Zn, Fe)

    KAUST Repository

    Edhaim, Fatimah

    2017-12-21

    Three chalcogels KCrBiTe3, KZnBiTe3, and KFeBiTe3 were synthesized by the sol–gel metathesis route. K+ and the transition metal cations Cr2+, Zn2+ or Fe2+ connect [BiTe3]3− anions to form amorphous black compounds. Supercritical drying of the black gels produced porous materials with BET surface areas of 230 m2/g (KCrBiTe3), 450 m2/g (KZnBiTe3) and 514 m2/g (KFeBiTe3). The adsorption properties of the resulting chalcogenide aerogels or chalcogels have been studied using volatile organic hydrocarbons (VOCs) and gases as adsorptives. The results show preferential adsorption of toluene vapor over cyclohexane vapor. The adsorption capacity toward toluene is 5.02 mmol/g for KCrBiTe3, 5.58 mmol/g for KZnBiTe3 and 7.89 mmol/g for KFeBiTe3. Preferential adsorption of CO2 over CH4 or H2 was observed for the chalcogels: KCrBiTe3 (CO2/H2: 175, CO2/CH4: 50), KZnBiTe3 (CO2/H2: 180 and CO2/CH4: 60) and KFeBiTe3 (CO2/H2: 225 and CO2/CH4: 65).

  3. Microbiological investigations on the elimination of volatile chlorinated hydrocarbons. Final report. Mikrobiologische Untersuchungen zur Elimination leichtfluechtiger Chlorkohlenwasserstoffe durch Biofilme. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Scholz-Muramatsu, H.

    1989-03-01

    The anaerobic elimination of 1,1,1-trichloroethane (TCA), trichloroethene (TCE) and tetrachlorethene (PCE) was studied under batch conditions and in a fixed bed reactor (concentrations of the chlorinated compounds 50 to 200 {mu}mol/l). Co-substrates for the anaerobic elimination of the chlorinated hydrocarbons were hydrogen, glucose, and benzoate. With glucose (2 mmol/l) PCE was dehalogenated to DCE (25 {mu}mol/m{sup 2}xh). PCE was eliminated to unchlorinated compounds under batch conditions with hydrogen as co-substrate (5 {mu}mol/lxd). In continuous culture with benzoate (2 to 4 mmol/l) PCE was dechlorinated to low concentrations of DCE or even totally as long as there was active methanogenesis. Under batch conditions TCA was dechlorinated completely with glucose as well as with benzoate (1,5 to 5 {mu}mol/lxd). PCE could be eliminated to DCE by fermenting bacteria without methanogenesis. The inhibiting factors for the elimination of dichloromethane (DCM) by groundwater contaminated with leachate of a laquer sludge landfill were studied. About 50% of the inhibiting substances belonged to the volatile fraction of the ground-water. Selected compounds out of this fraction were examined in regard to there inhibiting effect on the DCM elimination rate. A distinct inhibition was caused by 1,2-dichloroethane, ethylbenzene, and xylene. The DCM elimination was most sensitive against 1,2-dichloroethane. Besides this the leachate contained nonvolatile inhibitors which could not be identified. (orig.) With 42 refs., 12 tabs., 11 figs.

  4. Separation and identification of hydrocarbons and other volatile compounds from cultures of Aspergillus niger by GC–MS using two different capillary columns and solvents

    Directory of Open Access Journals (Sweden)

    Shafiquzzaman Siddiquee

    2015-05-01

    Full Text Available A simple, fast, repeatable, and less laborious sample-preparation protocol based on gas chromatography–mass spectrometry was developed and applied for the analysis of bioactive compounds derived from the filamentous fungus Aspergillus niger strain SS10. The match factors for the spectra of the samples with reference to the mass-spectral library of fungal volatile compounds were determined and used to study the complex hydrocarbons and other volatile compounds that were separated using two different capillary columns and nonpolar and medium-polar stationary phases. More than 295 volatile compounds (spectral match factor of at least 90%, such as normal saturated hydrocarbons (C7–C30, cyclohexane, cyclopentane, fatty acids, alcohols, esters, sulfur- and bromo-containing compounds, simple pyrane, and benzene derivatives, were identified. Most of these compounds have not been reported earlier. The method described in this article is a suitable research tool for the determination of volatile compounds from the cultures of A. niger.

  5. Space-weathering processes and products on volatile-rich asteroids

    Science.gov (United States)

    Britt, D.; Schelling, P.; Consolmagno, G.; Bradley, T.

    2014-07-01

    recombine with available solar-wind-implanted hydrogen to form trace amounts of water and OH. Mineral decomposition can be thought of as the first stage of space weathering. It produces weathered surfaces somewhat depleted in volatile elements, creates a predictable set of minor or trace minerals, and leaves the surfaces with catalytic species, primarily npFe0. However, a second stage of further reactions and weathering depends upon the presence of ''feed-stock'' components that can participate in catalyzed chemical reactions on exposed surfaces. For volatile-rich small bodies, the available materials are not only silicates, but a volatile feedstock that can include water, carbon monoxide, ammonia, to name a few. Thermodynamically-driven decomposition of silicates will produce trace amounts of npFe0 which are ideal sites for Fischer-Tropsch type (FTT) catalytic reactions that can produce organics in situ on the asteroids including alkanes, polyaromatic hydrocarbons, and amino acids (J.E. Elsila, 2012, MAPS 47). The mix and range of products depends on the composition and morphology of the mineral surface, energy inputs produced by the micrometeorite impacts or other processes, and the composition of the input volatile feedstock. FFT reactions generate long-chain carbon compounds and amino acids. Secondary reactions that generate more complex carbon compounds and amino acids are likely to occur as the organic material matures. Weathering maturity can be thought of as a function of the abundance and diversity of the weathering products. Since the npFe0 is not destroyed in the reaction, continued micrometeorite bombardment would result in continuing processing and recombination of the existing organic feedstock. More weathering would result in progressively longer-chain carbon compounds as well as more complex and diverse amino acids, and eventually the kerogen-like insoluble-organic matter that forms a large fraction of carbonaceous meteorites. This insight has several major

  6. Fungal production of volatiles during growth on fiberglass.

    OpenAIRE

    Ezeonu, I M; D. L. Price; Simmons, R B; Crow, S A; Ahearn, D G

    1994-01-01

    Acoustic and thermal fiberglass insulation materials used in heating, ventilation, and air-conditioning systems were colonized with fungi in laboratory chambers. The mixed fungal population, principally Aspergillus versicolor, Acremonium obclavatum, and Cladosporium herbarum, produced odoriferous volatiles, including 2-ethyl hexanol, cyclohexane, and benzene. These volatiles may be related to poor indoor air quality and the sick building syndrome.

  7. Process for the continuous biological production of lipids, hydrocarbons or mixtures thereof

    NARCIS (Netherlands)

    Van der Wielen, L.A.M.; Heijnen, J.J.

    2010-01-01

    The present invention is directed to a process for the continuous biological production of lipids, hydrocarbons, hydrocarbon like material or mixtures thereof by conversion of a suitable substrate using micro-organisms, in which process the said substrate is continuously, anaerobically fermented to

  8. Volatile compound profiling of Turkish Divle Cave cheese during production and ripening

    NARCIS (Netherlands)

    Ozturkoglu-Budak, S; Gursoy, A; Aykas, D P; Koçak, C; Dönmez, S; de Vries, R P; Bron, P A

    2016-01-01

    The formation of volatile compounds in Turkish Divle Cave cheese produced in 3 different dairy farms was determined during production and ripening, revealing 110 compounds including acids, alcohols, ketones, esters, and terpenes. The presence and concentration of these volatile compounds varied

  9. Catalytic co-pyrolysis of waste vegetable oil and high density polyethylene for hydrocarbon fuel production.

    Science.gov (United States)

    Wang, Yunpu; Dai, Leilei; Fan, Liangliang; Cao, Leipeng; Zhou, Yue; Zhao, Yunfeng; Liu, Yuhuan; Ruan, Roger

    2017-03-01

    In this study, a ZrO2-based polycrystalline ceramic foam catalyst was prepared and used in catalytic co-pyrolysis of waste vegetable oil and high density polyethylene (HDPE) for hydrocarbon fuel production. The effects of pyrolysis temperature, catalyst dosage, and HDPE to waste vegetable oil ratio on the product distribution and hydrocarbon fuel composition were examined. Experimental results indicate that the maximum hydrocarbon fuel yield of 63.1wt. % was obtained at 430°C, and the oxygenates were rarely detected in the hydrocarbon fuel. The hydrocarbon fuel yield increased when the catalyst was used. At the catalyst dosage of 15wt.%, the proportion of alkanes in the hydrocarbon fuel reached 97.85wt.%, which greatly simplified the fuel composition and improved the fuel quality. With the augment of HDPE to waste vegetable oil ratio, the hydrocarbon fuel yield monotonously increased. At the HDPE to waste vegetable oil ratio of 1:1, the maximum proportion (97.85wt.%) of alkanes was obtained. Moreover, the properties of hydrocarbon fuel were superior to biodiesel and 0# diesel due to higher calorific value, better low-temperature low fluidity, and lower density and viscosity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Hydrocarbons from Calotropis procera - product enhancement and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Choudhury, R.; Singh, Ritu (Indian Inst. of Tech., New Delhi (India). Centre of Energy Studies)

    1993-12-01

    The paper presents an investigation of the enhancement of hydrocarbon extraction from calotropis procera. An extraction yield of 8% has been obtained, with toluene as the solvent. An increase in the yield to 11.5% has been achieved by modification of the design of the conventional 'Soxhlet' extractor. A further enhancement has been achieved by pretreatment of the biomass with alkali or acid. This results in an extractive or hydrolytic breakdown of the plant structure and hence exposes the hydrocarbons to solvent attack. As alkali pretreatment of ground biomass resulted in a much higher extraction, it was studied in further detail with more alkalis of varying strength. AN enhancement from 8 to 18% has been achieved by pretreatment with 1 N sodium hydroxide. Analytical studies by the use of IR and NMR have been conducted to prove that the enhancement in extraction is due to efficient extraction of hydrocarbons. (author)

  11. Optofluidic reactors for reverse combustion photocatalytic production of hydrocarbons (Conference Presentation)

    Science.gov (United States)

    Schein, Perry; Erickson, David

    2017-03-01

    In combustion, hydrocarbon fuels are burned with oxygen to release energy, carbon dioxide and water vapor. Here, we introduce a photocatalytic reactor for reversing this process, when carbon dioxide and water are combined and using optical and thermal energy from the sun hydrocarbons are produced and oxygen is released. This allows for the sustainable production of hydrocarbon products from non-fossil sources, allowing for the development of "green" hydrocarbon products. Our reactors take the form of modular cells of 10 x 10 x 10 cm scale where light is delivered to nanostructured catalysts through the evanescent field around dielectric slab waveguides. The light distribution is optimized through the use of engineered scattering sites to enhance field uniformity. This is combined with integrated fluidic architecture to deliver a stream rich in water and carbon dioxide (such as exhaust from a natural gas burning plant) to the nanostructured catalyst particles in a narrow channel. Exhaust streams rich in oxygen and hydrocarbon products are collected at the outlet of the reactor cell. The cell is heated using solar thermal energy and temperatures of up to 200°C are achieved, enhancing reaction efficiency. Hydrocarbon products produced include methanol as well as other potentially useful molecules for fuel production or precursors to the manufacture of plastics. These reactors can be coupled to solar collectors to take advantage of the sun as a free source of heat and light, and the modular nature of the cells enables scaling to larger deployments.

  12. Mechanisms of volatile production from sulfur-containing amino acids by irradiation

    Science.gov (United States)

    Uk Ahn, Dong; Joo Lee, Eun; Feng, Xi; Zhang, Wangang; Lee, Ji Hwan; Jo, Cheorun; Nam, Kichang

    2016-02-01

    Sulfur-containing amino acids were used to study the mechanisms of off-odor production in meat by irradiation. Irradiation not only increased the amounts of volatiles but also produced many new volatiles from sulfur-containing amino acid monomers. We speculate that the majority of the volatiles were the direct radiolytic products of the side chains, but Strecker degradation as well as deamination and decarboxylation of radiolytic products were also involved in the production of volatile compounds from sulfur amino acids. The volatile compounds produced in amino acids were not only the primary products of irradiation, but also the products of secondary chemical reactions after the primary compounds were produced. Cysteine and methionine produced odor characteristics similar to that of the irradiated meat, but the amounts of sulfur volatiles from methionine were far greater than that of cysteine. Although the present study was carried out using an amino acid model system, the information can be applied to the quality indexes of irradiated meats as well as other food products.

  13. Influence of volatile organic compounds on Fusarium graminearum mycotoxin production

    Science.gov (United States)

    Volatile organic compounds (VOCs) are involved in a diverse range of ecological interactions. Due to their low molecular weight, lipophilic nature, and high vapor pressure at ambient temperatures, they can serve as airborne signaling molecules that are capable of mediating inter and intraspecies com...

  14. [Analysis of Volatile Oils from Different Processed Products of Zingiber officinale Rhizome by GC-MS].

    Science.gov (United States)

    Zhao, Hong-bing; Wang, Zhi-hui; He, Fang; Meng, Han; Peng, Jian-hua; Shi, Ji-lian

    2015-04-01

    To analyze the volatile components in different processed products of Zingiber officinale rhizome, and to make clear the effect of different heating degree on them. The volatile components were extracted from four kinds of processed products by applying steam distillation, and then were analyzed by GC-MS. There were totally 43 components of volatile oil identified from four kinds of processed products of Zingiber officinale rhizome. Fresh product, dried product, and charcoal product of Zingiber officinale rhizome each had 27 components of volatile oil, while sand fried product contained 24 components. Fresh Zingiber officinale rhizome contained 22. 59% of zingiberene, 20. 87% of a-citral and 11. 01% of β-phellandrene, respectively. After processing in different heating degree, the volatile components changed greatly in both of their quantity and quality, For instance, dried Zingiber officinale rhizome contained 40. 48% of α-citral and 8-phellandrene content was slightly lower at 10. 38%. 32.73% of 3,7,11-trimethyl-l, 6, 10-dodecatriene,16. 38% of murolan-3, 9 (11)-diene-10-peroxy and 3. 36% of cubebene newly emerged in the sand fried Zingiber officinale rhizome, and eudesm-4 (14) and β-bisabolol, etc. However, β-phellandrene content was only 1. 95%. The zingiberene and β-sesquiphellandrene were the highest in charcoal product, besides, new components such as α-cedrene, decanal and γ-elemene appeared. Volatile components in different processed products of Zingiber officinale rhizome were different in both of their kinds and contents. This method is suitable for the analysis of volatile components in Zingiber officinale rhizome, and this study can provide the experimental evidence for quality evaluation and clinical application for ginger processed products.

  15. Low-concentration tailing and subsequent quicklime-enhanced remediation of volatile chlorinated hydrocarbon-contaminated soils by mechanical soil aeration.

    Science.gov (United States)

    Ma, Yan; Du, Xiaoming; Shi, Yi; Xu, Zhu; Fang, Jidun; Li, Zheng; Li, Fasheng

    2015-02-01

    Mechanical soil aeration has long been regarded as an effective ex-situ remediation technique and as suitable for remediation of large-scale sites contaminated by volatile organic compounds (VOCs) at low cost. However, it has been reported that the removal efficiency of VOCs from soil is relatively low in the late stages of remediation, in association with tailing. Tailing may extend the remediation time required; moreover, it typically results in the presence of contaminants residues at levels far exceeding regulations. In this context, the present study aimed to discuss the tailing that occurs during the process of remediation of soils contaminated artificially with volatile chlorinated hydrocarbons (VCHs) and to assess possible quicklime-enhanced removal mechanisms. The results revealed the following conclusions. First, temperature and aeration rate can be important controls on both the timing of appearance of tailing and the levels of residual contaminants. Furthermore, the addition of quicklime to soil during tailing can reduce the residual concentrations rapidly to below the remedial target values required for site remediation. Finally, mechanical soil aeration can be enhanced using quicklime, which can improve the volatilization of VCHs via increasing soil temperature, reducing soil moisture, and enhancing soil permeability. Our findings give a basic understanding to the elimination of the tailing in the application of mechanical soil aeration, particularly for VOCs-contaminated soils. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Treatability of volatile chlorinated hydrocarbon-contaminated soils of different textures along a vertical profile by mechanical soil aeration: A laboratory test.

    Science.gov (United States)

    Ma, Yan; Shi, Yi; Hou, Deyi; Zhang, Xi; Chen, Jiaqi; Wang, Zhifen; Xu, Zhu; Li, Fasheng; Du, Xiaoming

    2017-04-01

    Mechanical soil aeration is a simple, effective, and low-cost soil remediation technology that is suitable for sites contaminated with volatile chlorinated hydrocarbons (VCHs). Conventionally, this technique is used to treat the mixed soil of a site without considering the diversity and treatability of different soils within the site. A laboratory test was conducted to evaluate the effectiveness of mechanical soil aeration for remediating soils of different textures (silty, clayey, and sandy soils) along a vertical profile at an abandoned chloro-alkali chemical site in China. The collected soils were artificially contaminated with chloroform (TCM) and trichloroethylene (TCE). Mechanical soil aeration was effective for remediating VCHs (removal efficiency >98%). The volatilization process was described by an exponential kinetic function. In the early stage of treatment (0-7hr), rapid contaminant volatilization followed a pseudo-first order kinetic model. VCH concentrations decreased to low levels and showed a tailing phenomenon with very slow contaminant release after 8hr. Compared with silty and sandy soils, clayey soil has high organic-matter content, a large specific surface area, a high clay fraction, and a complex pore structure. These characteristics substantially influenced the removal process, making it less efficient, more time consuming, and consequently more expensive. Our findings provide a potential basis for optimizing soil remediation strategy in a cost-effective manner. Copyright © 2016. Published by Elsevier B.V.

  17. Quicklime-induced changes of soil properties: Implications for enhanced remediation of volatile chlorinated hydrocarbon contaminated soils via mechanical soil aeration.

    Science.gov (United States)

    Ma, Yan; Dong, Binbin; He, Xiaosong; Shi, Yi; Xu, Mingyue; He, Xuwen; Du, Xiaoming; Li, Fasheng

    2017-04-01

    Mechanical soil aeration is used for soil remediation at sites contaminated by volatile organic compounds. However, the effectiveness of the method is limited by low soil temperature, high soil moisture, and high soil viscosity. Combined with mechanical soil aeration, quicklime has a practical application value related to reinforcement remediation and to its action in the remediation of soil contaminated with volatile organic compounds. In this study, the target pollutant was trichloroethylene, which is a volatile chlorinated hydrocarbon pollutant commonly found in contaminated soils. A restoration experiment was carried out, using a set of mechanical soil-aeration simulation tests, by adding quicklime (mass ratios of 3, 10, and 20%) to the contaminated soil. The results clearly indicate that quicklime changed the physical properties of the soil, which affected the environmental behaviour of trichloroethylene in the soil. The addition of CaO increased soil temperature and reduced soil moisture to improve the mass transfer of trichloroethylene. In addition, it improved the macroporous cumulative pore volume and average pore size, which increased soil permeability. As soil pH increased, the clay mineral content in the soils decreased, the cation exchange capacity and the redox potential decreased, and the removal of trichloroethylene from the soil was enhanced to a certain extent. After the addition of quicklime, the functional group COO of soil organic matter could interact with calcium ions, which increased soil polarity and promoted the removal of trichloroethylene. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Zeolite deactivation during hydrocarbon reactions: characterisation of coke precursors and acidity, product distribution

    OpenAIRE

    Wang, B.

    2008-01-01

    The catalytic conversion of hydrocarbons over zeolites has been applied in large scale petroleum-refining processes. However, there is always formation and retention of heavy by-products, called coke, which causes catalyst deactivation. This deactivation is due to the poisoning of the acid sites and/or pore blockage. The formation of coke on hydrocarbon processing catalysts is of considerable technological and economic importance and a great deal of work has been carried out to this study. Th...

  19. Occurrence of volatile and non-volatile N-nitrosamines in processed meat products and the role of heat treatment

    DEFF Research Database (Denmark)

    Herrmann, Susan Strange; Duedahl-Olesen, Lene; Granby, Kit

    2015-01-01

    Most of the available data on the occurrence of N-nitrosamines (NA) in processed meat products have been generated in the 1980s and 1990s and especially data on the occurrence of non-volatile NA (NVNA) are scarce. Therefore we have studied the levels of volatile nitrosamines (VNA) and NVNA...... in processed meat products on the Danish market (N = 70) and for comparison also products on the Belgian market (N = 20). The effect of heat treatment on the NA levels, in selected samples, was also studied, in order to enable an evaluation of how preparation before consumption affects the levels of NA...... μg kg−1 for one Danish sample and two Belgian samples. Levels of up to 2000 and 4000 μg kg−1 of N-nitroso-thiazolidine-4-carboxylic acid (NTCA) an NVNA occurred in the Danish and the Belgian samples, respectively. The majority of the Danish processed meat products contain NVNA but also VNA occur...

  20. Light Quality Dependent Changes in Morphology, Antioxidant Capacity, and Volatile Production in Sweet Basil (Ocimum basilicum)

    Science.gov (United States)

    Carvalho, Sofia D.; Schwieterman, Michael L.; Abrahan, Carolina E.; Colquhoun, Thomas A.; Folta, Kevin M.

    2016-01-01

    Narrow-bandwidth light treatments may be used to manipulate plant growth, development and metabolism. In this report LED-based light treatments were used to affect yield and metabolic content of sweet basil (Ocimum basilicum L. cv “Ceasar”) grown in controlled environments. This culinary herb produces an aroma highly appreciated by consumers, primarily composed of terpenes/terpenoids, phenylpropanoids, and fatty-acid- derived volatile molecules. Basil plants were grown under narrow-bandwidth light conditions, and leaf area, height, mass, antioxidant capacity and volatile emissions were measured at various time points. The results indicate reproducible significant differences in specific volatiles, and in biochemical classes of volatiles, compared to greenhouse grown plants. For example, basil plants grown under blue/red/yellow or blue/red/green wavelengths emit higher levels of a subset of monoterpenoid volatiles, while a blue/red/far-red treatment leads to higher levels of most sesquiterpenoid volatile molecules. Specific light treatments increase volatile content, mass, and antioxidant capacity. The results show that narrow-bandwidth illumination can induce discrete suites of volatile classes that affect sensory quality in commercial herbs, and may be a useful tool in improving commercial production. PMID:27635127

  1. Light Quality Dependent Changes in Morphology, Antioxidant Capacity, and Volatile Production in Sweet Basil (Ocimum basilicum

    Directory of Open Access Journals (Sweden)

    Sofia Carvalho

    2016-09-01

    Full Text Available Narrow-bandwidth light treatments may be used to manipulate plant growth, development and metabolism. In this report LED-based light treatments were used to affect yield and metabolic content of sweet basil (Ocimum basilicum L. cv ‘Ceasar’ grown in controlled environments. This culinary herb produces an aroma highly appreciated by consumers, primarily composed of terpenes/terpenoids, phenylpropanoids, and fatty-acid- derived volatile molecules. Basil plants were grown under narrow-bandwidth light conditions, and leaf area, height, mass, antioxidant capacity and volatile emissions were measured at various time points. The results indicate reproducible significant differences in specific volatiles, and in biochemical classes of volatiles, compared to greenhouse grown plants. For example, basil plants grown under blue/red/yellow or blue/red/green wavelengths emit higher levels of a subset of monoterpenoid volatiles, while a blue/red/far-red treatment leads to higher levels of most sesquiterpenoid volatile molecules. Specific light treatments increase volatile content, mass, and antioxidant capacity. The results show that narrow-bandwidth illumination can induce discrete suites of volatile classes that affect sensory quality in commercial herbs, and may be useful tools in improving commercial production.

  2. Dietary exposure to volatile and non-volatile N-nitrosamines from processed meat products in Denmark

    DEFF Research Database (Denmark)

    Herrmann, Susan Strange; Duedahl-Olesen, Lene; Christensen, Tue

    2015-01-01

    Recent epidemiological studies show a positive association between cancer incidence and high intake of processed meat. N-nitrosamines (NAs) in these products have been suggested as one potential causative factor. Most volatile NAs (VNAs) are classified as probable human carcinogens, whereas the c...... value ≥17,000 was derived for the exposure to NA known to be carcinogenic (VNA including NSAR), indicating an exposure of low concern. The exposure to the NVNA is substantially higher and if found to be of toxicological significance the exposure may be of concern....

  3. Selective adsorption of volatile hydrocarbons and gases in high surface area chalcogels containing [ES3]3- anions (E = As, Sb)

    KAUST Repository

    Ahmed, Ejaz

    2014-11-25

    We describe the sol-gel synthesis of the two new chalcogels KFeSbS3 and NaFeAsS3, which demonstrate excellent adsorption selectivity for volatile hydrocarbons and gases. These predominantly mesoporous materials have been synthesized by reacting Fe(OAc)2 with K3SbS3 or Na3AsS3 in a formamide/water mixture at room temperature. Aerogels obtained after supercritical drying have BET surface areas of 636 m2/g and 505 m2/g for KFeSbS3 and NaFeAsS3, respectively, with pore sizes in the micro- (below 2 nm), meso- (2-50 nm), and macro- (above 50 nm) regions.

  4. Emissions of Volatile Organic Compounds (VOCs) Associated with Natural Gas Production in the Uintah Basin, Utah

    Science.gov (United States)

    Warneke, C.; Geiger, F.; Zahn, A.; Graus, M.; De Gouw, J. A.; Gilman, J. B.; Lerner, B. M.; Roberts, J. M.; Edwards, P. M.; Dube, W. P.; Brown, S. S.; Peischl, J.; Ryerson, T. B.; Williams, E. J.; Petron, G.; Kofler, J.; Sweeney, C.; Karion, A.; Dlugokencky, E. J.

    2012-12-01

    Technological advances such as hydraulic fracturing have led to a rapid increase in the production of natural gas from several basins in the Rocky Mountain West, including the Denver-Julesburg basin in Colorado, the Uintah basin in Utah and the Upper Green River basin in Wyoming. There are significant concerns about the impact of natural gas production on the atmosphere, including (1) emissions of methane, which determine the net climate impact of this energy source, (2) emissions of reactive hydrocarbons and nitrogen oxides, and their contribution to photochemical ozone formation, and (3) emissions of air toxics with direct health effects. The Energy & Environment - Uintah Basin Wintertime Ozone Study (UBWOS) in 2012 was focused on addressing these issues. During UBWOS, measurements of volatile organic compounds (VOCs) were made using proton-transfer-reaction mass spectrometry (PTR-MS) instruments from a ground site and a mobile laboratory. Measurements at the ground site showed mixing ratios of VOCs related to oil and gas extraction were greatly enhanced in the Uintah basin, including several days long periods of elevated mixing ratios and concentrated short term plumes. Diurnal variations were observed with large mixing ratios during the night caused by low nighttime mixing heights and a shift in wind direction during the day. The mobile laboratory sampled a wide variety of individual parts of the gas production infrastructure including active gas wells and various processing plants. Included in those point sources was a new well that was sampled by the mobile laboratory 11 times within two weeks. This new well was previously hydraulically fractured and had an active flow-back pond. Very high mixing ratios of aromatics were observed close to the flow-back pond. The measurements of the mobile laboratory are used to determine the source composition of the individual point sources and those are compared to the VOC enhancement ratios observed at the ground site. The

  5. A novel zeolite process for clean end use of hydrocarbon products

    Energy Technology Data Exchange (ETDEWEB)

    Keskinen, K.M. [Neste Oy, Porvoo (Finland). Technology Centre

    1996-12-31

    In recent years zeolites such as ZSM-5 have attracted considerable interest for the catalysis of a wide range of hydrocarbon transformations. A novel process developed by Neste converts light olefins to higher molecular weight hydrocarbon products. A wide range of high quality diesel, solvents and lube oils can be produced by the new NESKO process. Hydrotreated products have excellent properties; negligible sulphur or nitrogen compounds, very low aromatic content and pour point lower than -50 deg C. Proprietary technology is used in this olefin oligomerization process. (author) (7 refs.)

  6. Culture of the green microalga Botryococcus braunii Showa with LED irradiation eliminating violet light enhances hydrocarbon production and recovery.

    Science.gov (United States)

    Atobe, Sueko; Saga, Kiyotaka; Maeyama, Haruko; Fujiwara, Kazuhiro; Okada, Shigeru; Imou, Kenji

    2014-01-01

    The green microalga Botryococcus braunii (B. braunii), race B, was cultured under light-emitting diode (LED) irradiation with and without violet light. This study examined the effect of violet light on hydrocarbon recovery and production in B. braunii. C34 botryococcene hydrocarbons were efficiently extracted by thermal pretreatments at lower temperatures when the alga was cultured without violet light. The hydrocarbon content was also higher (approximately 3%) in samples cultured without violet light. To elucidate the mechanism of effective hydrocarbon recovery and production, we examined structural components of the extracellular matrix (ECM). The amounts of extracellular carotenoids and water-soluble polymers extracted by thermal pretreatment from the ECM were decreased when the alga was cultured without violet light. These results indicate that LED irradiation without violet light is more effective for hydrocarbon recovery and production in B. braunii. Furthermore, structural ECM components are closely involved in hydrocarbon recovery and production in B. braunii.

  7. PERVAPORATION MEMBRANE SYSTEMS FOR VOLATILE FERMENTATION PRODUCT RECOVERY AND DEHYDRATION

    Science.gov (United States)

    The economics of fermentative production of fuels and commodity chemicals can be a strong function of the efficiency with which the fermentation products are removed from the biological media. Due to growth inhibition by some fermentation products, including ethanol, concentrati...

  8. Dietary exposure to volatile and non-volatile N-nitrosamines from processed meat products in Denmark.

    Science.gov (United States)

    Herrmann, S S; Duedahl-Olesen, L; Christensen, T; Olesen, P T; Granby, K

    2015-06-01

    Recent epidemiological studies show a positive association between cancer incidence and high intake of processed meat. N-nitrosamines (NAs) in these products have been suggested as one potential causative factor. Most volatile NAs (VNAs) are classified as probable human carcinogens, whereas the carcinogenicity for the majority of the non-volatile NA (NVNA) remains to be elucidated. Danish adults (15-75 years) and children (4-6 years) consume 20 g and 16 g of processed meat per day (95th percentile), respectively. The consumption is primarily accounted for by sausages, salami, pork flank (spiced and boiled) and ham. This consumption results in an exposure to NVNA of 33 and 90 ng kg bw(-1) day(-1) for adults and children, respectively. The exposure to VNA is significantly lower amounting to 0.34 and 1.1 ng kg bw(-1) day(-1) for adults and children, respectively. Based on a BMDL10 of 29 µg kg bw(-1) day(-1) a MOE value ≥17,000 was derived for the exposure to NA known to be carcinogenic (VNA including NSAR), indicating an exposure of low concern. The exposure to the NVNA is substantially higher and if found to be of toxicological significance the exposure may be of concern. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. Spent Nuclear Fuel project estimate of volatile fission products release from multi-canister overpacks

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, T.D.

    1996-08-01

    Spent N-Reactor fuel will be moved from wet pool storage to dry storage at Hanford Washington. This fuel will be sequentially loaded into a Multiple Container Overpack (MCO), moved to the cold vacuum drying station, drained, cold vacuum dried, shipped to the Canister Storage Building (CSB), staged for up to 2 years,hot vacuum dried at 300 degrees C, hot conditioned at 150 degrees C, and finally, sealed and stored for up to 75 years in the CSB.During each proposed process step, the volatile radioactive fission products released to the atmosphere were estimated.Tritium is the only volatile fission product released insignificant amounts during each process step. For an accident scenario involving interior MCO temperature of 600 degrees C for up to 8 hours, it was estimated that many volatile fission products are released.

  10. Thermocatalytic process for CO.sub.2-free production of hydrogen and carbon from hydrocarbons

    Science.gov (United States)

    Muradov, Nazim Z [Melbourne, FL

    2011-08-23

    A novel process and apparatus are disclosed for sustainable CO.sub.2-free production of hydrogen and carbon by thermocatalytic decomposition (dissociation, pyrolysis, cracking) of hydrocarbon fuels over carbon-based catalysts in the absence of air and/or water. The apparatus and thermocatalytic process improve the activity and stability of carbon catalysts during the thermocatalytic process and produce both high purity hydrogen (at least, 99.0 volume %) and carbon, from any hydrocarbon fuel, including sulfurous fuels. In a preferred embodiment, production of hydrogen and carbon is achieved by both internal and external activation of carbon catalysts. Internal activation of carbon catalyst is accomplished by recycling of hydrogen-depleted gas containing unsaturated and aromatic hydrocarbons back to the reactor. External activation of the catalyst can be achieved via surface gasification with hot combustion gases during catalyst heating. The process and apparatus can be conveniently integrated with any type of fuel cell to generate electricity.

  11. Using supercritical fluids to refine hydrocarbons

    Science.gov (United States)

    Yarbro, Stephen Lee

    2015-06-09

    A system and method for reactively refining hydrocarbons, such as heavy oils with API gravities of less than 20 degrees and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure, using a selected fluid at supercritical conditions. A reaction portion of the system and method delivers lightweight, volatile hydrocarbons to an associated contacting unit which operates in mixed subcritical/supercritical or supercritical modes. Using thermal diffusion, multiphase contact, or a momentum generating pressure gradient, the contacting unit separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques.

  12. Micronutrient requirements for growth and hydrocarbon production in the oil producing green alga Botryococcus braunii (Chlorophyta).

    Science.gov (United States)

    Song, Liang; Qin, Jian G; Su, Shengqi; Xu, Jianhe; Clarke, Stephen; Shan, Yichu

    2012-01-01

    The requirements of micronutrients for biomass and hydrocarbon production in Botryococcus braunii UTEX 572 were studied using response surface methodology. The concentrations of four micronutrients (iron, manganese, molybdenum, and nickel) were manipulated to achieve the best performance of B. braunii in laboratory conditions. The responses of algal biomass and hydrocarbon to the concentration variations of the four micronutrients were estimated by a second order quadratic regression model. Genetic algorithm calculations showed that the optimal level of micronutrients for algal biomass were 0.266 µM iron, 0.707 µM manganese, 0.624 µM molybdenum and 3.38 µM nickel. The maximum hydrocarbon content could be achieved when the culture media contained 10.43 µM iron, 6.53 µM manganese, 0.012 µM molybdenum and 1.73 µM nickel. The validation through an independent test in a photobioreactor suggests that the modified media with optimised concentrations of trace elements can increase algal biomass by 34.5% and hydrocarbon by 27.4%. This study indicates that micronutrients play significant roles in regulating algal growth and hydrocarbon production, and the response surface methodology can be used to optimise the composition of culture medium in algal culture.

  13. GC-MS Profiling of Volatile Components in Different Fermentation Products of Cordyceps Sinensis Mycelia

    Directory of Open Access Journals (Sweden)

    Hongyang Zhang

    2017-10-01

    Full Text Available The fermentation products of Cordyceps sinensis (C. sinensis mycelia are sustainable substitutes for natural C. sinensis. However, the volatile compositions of the commercial products are still unclear. In this paper, we have developed a simultaneous distillation-extraction (SDE and gas chromatography-mass spectrometry (GC-MS method for the profiling of volatile components in five fermentation products. A total of 64, 39, 56, 52, and 44 components were identified in the essential oils of Jinshuibao capsule (JSBC, Bailing capsule (BLC, Zhiling capsule (ZLC, Ningxinbao capsule (NXBC, and Xinganbao capsule (XGBC, respectively. 5,6-Dihydro-6-pentyl-2H-pyran-2-one (massoia lactone was first discovered as the dominant component in JSBC volatiles. Fatty acids including palmitic acid (C16:0 and linoleic acid (C18:2 were also found to be major volatile compositions of the fermentation products. The multivariate partial least squares-discriminant analysis (PLS-DA showed a clear discrimination among the different commercial products as well as the counterfeits. This study may provide further chemical evidences for the quality evaluation of the fermentation products of C. sinensis mycelia.

  14. Methane and benzene in drinking-water wells overlying the Eagle Ford, Fayetteville, and Haynesville Shale hydrocarbon production areas

    Science.gov (United States)

    McMahon, Peter B.; Barlow, Jeannie R.; Engle, Mark A.; Belitz, Kenneth; Ging, Patricia B.; Hunt, Andrew G.; Jurgens, Bryant; Kharaka, Yousif K.; Tollett, Roland W.; Kresse, Timothy M.

    2017-01-01

    Water wells (n = 116) overlying the Eagle Ford, Fayetteville, and Haynesville Shale hydrocarbon production areas were sampled for chemical, isotopic, and groundwater-age tracers to investigate the occurrence and sources of selected hydrocarbons in groundwater. Methane isotopes and hydrocarbon gas compositions indicate most of the methane in the wells was biogenic and produced by the CO2 reduction pathway, not from thermogenic shale gas. Two samples contained methane from the fermentation pathway that could be associated with hydrocarbon degradation based on their co-occurrence with hydrocarbons such as ethylbenzene and butane. Benzene was detected at low concentrations (ages >2500 years, indicating the benzene was from subsurface sources such as natural hydrocarbon migration or leaking hydrocarbon wells. One sample contained benzene that could be from a surface release associated with hydrocarbon production activities based on its age (10 ± 2.4 years) and proximity to hydrocarbon wells. Groundwater travel times inferred from the age-data indicate decades or longer may be needed to fully assess the effects of potential subsurface and surface releases of hydrocarbons on the wells.

  15. Fischer-Tropsch catalysts for the production of hydrocarbon fuels with high selectivity.

    Science.gov (United States)

    Zhang, Qinghong; Cheng, Kang; Kang, Jincan; Deng, Weiping; Wang, Ye

    2014-05-01

    Fischer-Tropsch synthesis is a key reaction in the utilization of non-petroleum carbon resources, such as methane (natural gas, shale gas, and biogas), coal, and biomass, for the sustainable production of clean liquid fuels from synthesis gas. Selectivity control is one of the biggest challenges in Fischer-Tropsch synthesis. This Minireview focuses on the development of new catalysts with controllable product selectivities. Recent attempts to increase the selectivity to C5+ hydrocarbons by preparing catalysts with well-defined active phases or with new supports or by optimizing the interaction between the promoter and the active phase are briefly highlighted. Advances in developing bifunctional catalysts capable of catalyzing both CO hydrogenation to heavier hydrocarbons and hydrocracking/isomerization of heavier hydrocarbons are critically reviewed. It is demonstrated that the control of the secondary hydrocracking reactions by using core-shell nanostructures or solid-acid materials, such as mesoporous zeolites and carbon nanotubes with acid functional groups, is an effective strategy to tune the product selectivity of Fischer-Tropsch synthesis. Very promising selectivities to gasoline- and diesel-range hydrocarbons have been attained over some bifunctional catalysts. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Duff reaction on phenols: Characterization of non steam volatile products

    Digital Repository Service at National Institute of Oceanography (India)

    Wahidullah, S.; DeSouza, L.; Bhattacharya, J.

    New products having structures 1 and 2 have been characterized in the Duff reaction thymol arid carvacrol. These products have been identified as 2.6'-dithymylmethane 1 and 5.5' -dicarvacryl methane 2 respectively on the basis of spectral data...

  17. Analysis of diacetylmorphine, caffeine, and degradation products after volatilization of pharmaceutical heroin for inhalation

    NARCIS (Netherlands)

    Klous, Marjolein G.; Lee, WeiChing; Hillebrand, Michel J. X.; van den Brink, Wim; van Ree, Jan M.; Beijnen, Jos H.

    2006-01-01

    Pharmaceutical smokable heroin was developed for a clinical trial on medical co-prescription of heroin and methadone. This product, consisting of 75% w/w diacetylmorphine base and 25% w/w caffeine anhydrate, was intended for use via "chasing the dragon", that is, inhalation after volatilization.

  18. A plant thiolase involved in benzoic acid biosynthesis and volatile benzenoid production

    NARCIS (Netherlands)

    Van Moerkercke, A.; Schauvinhold, I.; Pichersky, E.; Haring, M.A.; Schuurink, R.C.

    2009-01-01

    The exact biosynthetic pathways leading to benzoic acid (BA) formation in plants are not known, but labeling experiments indicate the contribution of both β-oxidative and non-β-oxidative pathways. In Petunia hybrida BA is a key precursor for the production of volatile benzenoids by its flowers.

  19. Production Of Low Molecular Weight Hydrocarbons By Volcanic Eruptions On Early Mars

    Science.gov (United States)

    Segura, Antígona; Navarro-González, Rafael

    2005-10-01

    Methane and other larger hydrocarbons have been proposed as possible greenhouse gases on early Mars. In this work we explore if volcanic processes may have been a source for such molecules based on theoretical and experimental considerations. Geologic evidence and numerical simulations indicate that explosive volcanism was widely distributed throughout Mars. Volcanic lightning is typically produced in such explosive volcanism. Therefore this geologic setting was studied to determine if lightning could be a source for hydrocarbons in volcanic plumes. Volcanic lightning was simulated by focusing a high-energy infrared laser beam inside of a Pyrex reactor that contained the proposed volcanic gas mixture composed of 64% CH4, 24% H2, 10% H2O and 2% N2, according to an accretion model and the nitrogen content measured in Martian meteorites. The analysis of products was performed by gas chromatography coupled to infrared and mass spectroscopy. Eleven hydrocarbons were identified among the products, of which acetylene (C2H2) was the most abundant. A thermochemical model was used to determine which hydrocarbons could arise only from volcanic heat. In this case, acetylene and ethylene are formed at magmatic temperatures. Our results indicate that explosive volcanism may have injected into the atmosphere of early Mars ˜6×1012 g yr-1 of acetylene, and ˜2×1012 g yr-1 of 1,3-butadiyne, both produced by volcanic lightning, ˜5×1011 g yr-1 of ethylene produced by volcanic heat, and 1013 g yr-1 of methane.

  20. Development of volatile compounds during storage at various conditions of different lipid containing lip balm products

    DEFF Research Database (Denmark)

    Thomsen, Birgitte Raagaard; Horn, A. F.; Hyldig, Grethe

    Many lip balms contain various lipids to care and soften the lips. However, the content of these lipids even in small amounts increases the risk of oxidation when exposed to heat, light or other conditions with a pro-oxidative effect. The progress of oxidation can be affected by several factors...... volatile compounds with off-odours. This presentation will include results from a storage experiment on four lip balms stored between 14 and 84 days, under different conditions. The samples were exposed to heat (20°C, 40°C and 50°C), light (samples at 20°C) and iron (samples at 40°C). Samples were analysed...... the concentration of most volatiles. Furthermore, high temperature (40 and 50 °C) increased the concentration of volatile oxidation products. For some volatiles the effect of iron addition was larger in some lip balms than in others, but none of the lip balms had consistently higher levels of volatiles...

  1. Cryogenic Grinding: a Physical Technique to Retain Volatile Content in Natural Products

    Science.gov (United States)

    Saxena, Rohit; Soni, Aditi; Saxna, S. N.; Rathore, S. S.; Barnwal, P.

    Cryogenics is the study of the production of very low temperature (below -150°C, -238°F or 123K) and the behavior of materials at those temperatures. Similarly, cryogenic grinding is a term supported by the act of grinding a thing at very low temperature. This technique is generally used to grind the material, which contains heat labile constituents viz- volatile oils in seed spices. Due to high fat content in spices, heat is generated, while energy is used to fracture a particle into a smaller size in conventional grinding process. During the normal grinding process, this generated heat causes temperature rise of grinder upto 950C. The increased temperature is responsible for a loss of volatile content in the tune of about 30% and also produces dark colour powder. Generally, continuous operation is not possible in normal grinding process due to melting of fat and sticking of powder on the grinding surface. The loss of volatile content can be significantly reduced by cryogenic grinding technique using liquid nitrogen or liquid carbon dioxide that provides the refrigeration needed to pre-cool the spices and maintain the desired low temperature by absorbing the heat generated during the grinding operation. The extremely low temperature during grinder condenses the volatile matter and retains their presence in spices. The application of cryogenic technology for grinding of spices has been scientifically proved to be a suitable technique with negligible loss of volatile content and improved colour of oil and grinding operation of seeds.

  2. Studies of the Atmospheric Chemsitry of Energy-Related Volatile Organic Compounds and of their Atmospheric Reaction Products

    Energy Technology Data Exchange (ETDEWEB)

    Roger Atkinson; Janet Arey

    2007-04-14

    The focus of this contract was to investigate selected aspects of the atmospheric chemistry of volatile organic compounds (VOCs) emitted into the atmosphere from energy-related sources as well as from biogenic sources. The classes of VOCs studied were polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs, the biogenic VOCs isoprene, 2-methyl-3-buten-2-ol and cis-3-hexen-1-ol, alkenes (including alkenes emitted from vegetation) and their oxygenated atmospheric reaction products, and a series of oxygenated carbonyl and hydroxycarbonyl compounds formed as atmospheric reaction products of aromatic hydrocarbons and other VOCs. Large volume reaction chambers were used to investigate the kinetics and/or products of photolysis and of the gas-phase reactions of these organic compounds with hydroxyl (OH) radicals, nitrate (NO3) radicals, and ozone (O3), using an array of analytical instrumentation to analyze the reactants and products (including gas chromatography, in situ Fourier transform infrared spectroscopy, and direct air sampling atmospheric pressure ionization tandem mass spectrometry). The following studies were carried out. The photolysis rates of 1- and 2-nitronaphthalene and of eleven isomeric methylnitronaphthalenes were measured indoors using blacklamp irradiation and outdoors using natural sunlight. Rate constants were measured for the gas-phase reactions of OH radicals, Cl atoms and NO3 radicals with naphthalene, 1- and 2-methylnaphthalene, 1- and 2-ethylnaphthalene and the ten dimethylnaphthalene isomers. Rate constants were measured for the gas-phase reactions of OH radicals with four unsaturated carbonyls and with a series of hydroxyaldehydes formed as atmospheric reaction products of other VOCs, and for the gas-phase reactions of O3 with a series of cycloalkenes. Products of the gas-phase reactions of OH radicals and O3 with a series of biogenically emitted VOCs were identified and quantified. Ambient atmospheric measurements of the concentrations of a

  3. Effect of Boric Acid on Volatile Products of Thermooxidative Degradation of Epoxy Polymers

    Science.gov (United States)

    Nazarenko, O. B.; Bukhareva, P. B.; Melnikova, T. V.; Visakh, P. M.

    2016-01-01

    The polymeric materials are characterized by high flammability. The use of flame retardants in order to reduce the flammability of polymers can lead to the formation of toxic gaseous products under fire conditions. In this work we studied the effect of boric acid on the volatile products of thermooxidative degradation of epoxy polymers. The comparative investigations were carried out on the samples of the unfilled epoxy resin and epoxy resin filled with a boric acid at percentage 10 wt. %. The analysis of the volatile decomposition products and thermal stability of the samples under heating in an oxidizing medium was performed using a thermal mass-spectrometric analysis. It is found that the incorporation of boric acid into the polymer matrix increases the thermal stability of epoxy composites and leads to a reduction in the 2-2.7 times of toxic gaseous products

  4. Oil and Hydrocarbon Spill Bioremediation Product and Application Technology

    Science.gov (United States)

    1993-05-01

    important found in marine and soil environments are Achromobacter, Acinetobacter, Alcaligenes, Arthrobacter, Bacillus, Flavobacterium, Nocardia , and...Kiebsiella Heiminthosporium Lactobacillus Mucor Leucothrix Oidiadendrumn Moraxella Paecylomyces Nocardia Phialophora Peptococcus Penicillium Pseudomonas...required since they are incorporated in the mixture. The product is non-toxic to humans, fish , or wildlife. No specific data on application rates

  5. Volatile fatty acids production in ruminants and the role of ...

    African Journals Online (AJOL)

    Two major functions of monocarboxylate transporter proteins, namely the facilitation of the absorption of SCFAs in the gastrointestinal tract and the regulation of cell pH in skeletal muscles, are clearly very important for physiological homeostasis, animal welfare and productivity. Key words: Ruminants, monocarboxylates, ...

  6. Effect of humic deposit (leonardite) on degradation of semi-volatile and heavy hydrocarbons and soil quality in crude-oil-contaminated soil.

    Science.gov (United States)

    Turgay, Oguz Can; Erdogan, Esin Eraydın; Karaca, Ayten

    2010-11-01

    In order to investigate the bioremedial potential of humic deposit (leonardite), the effects of the treatments of leonardite and a commercial bioaugmentation agent on the degradation of a variety of petroleum hydrocarbons (C13-C31) and soil enzyme activities (urease acid-alkaline phosphatase and dehydrogenase) were tested within a soil incubation experiment lasting 120 days. Experimentally crude-oil-contaminated soil (2.5%) was regulated to a C:N:P ratio (100:15:1; Oilcon), amended with 5% of leonardite and regulated to the same C:N:P ratio (Oilcon-L) or mixed with a commercial bioaugmentation product (Oilcon-B), respectively. In the short period of incubation (60 days), Oilcon and Oilcon-B treatments showed higher hydrocarbon degradations, whereas Oilcon-L showed higher hydrocarbon degradation over Oilcon and Oilcon-B treatments in the long-term (120 days). Applying contaminated soil with leonardite increased urease (LSD, 4.978, *Psoil ecological quality measured as soil enzyme activities.

  7. Studying products of lignin and hydrocarbon destruction in beech prehydrolyzate

    Energy Technology Data Exchange (ETDEWEB)

    Golis, C.Sc.E.; Mozolova, L.; Suty, L.

    1979-01-01

    Examines composition and content of certain prehydrolyzate components and potential for utilizing them. Furfurol, vanillin, syringic aldehyde, m-hydroxybenzaldehyde, vanillic, syringic, m-hydroxybenzoic acids, pyrogallol, pyrocatechil, 3.5-0-furilidene-D-xylo-furanose and 3.8-dihydroxi-2-methylchromone, were located in the prehydrolyzate. Spectrophotometry, ultra-violet and infrared, mass spectrometry and other methods were utilized to analyze the products.

  8. Wine phenolic compounds influence the production of volatile phenols by wine-related lactic acid bacteria.

    Science.gov (United States)

    Silva, I; Campos, F M; Hogg, T; Couto, J A

    2011-08-01

    To evaluate the effect of wine phenolic compounds on the production of volatile phenols (4-vinylphenol [4VP] and 4-ethylphenol [4EP]) from the metabolism of p-coumaric acid by lactic acid bacteria (LAB). Lactobacillus plantarum, Lactobacillus collinoides and Pediococcus pentosaceus were grown in MRS medium supplemented with p-coumaric acid, in the presence of different phenolic compounds: nonflavonoids (hydroxycinnamic and benzoic acids) and flavonoids (flavonols and flavanols). The inducibility of the enzymes involved in the p-coumaric acid metabolism was studied in resting cells. The hydroxycinnamic acids tested stimulated the capacity of LAB to synthesize volatile phenols. Growth in the presence of hydroxycinnamic acids, especially caffeic acid, induced the production of 4VP by resting cells. The hydroxybenzoic acids did not significantly affect the behaviour of the studied strains. Some of the flavonoids showed an effect on the production of volatile phenols, although strongly dependent on the bacterial species. Relatively high concentrations (1 g l(-1) ) of tannins inhibited the synthesis of 4VP by Lact. plantarum. Hydroxycinnamic acids were the main compounds stimulating the production of volatile phenols by LAB. The results suggest that caffeic and ferulic acids induce the synthesis of the cinnamate decarboxylase involved in the metabolism of p-coumaric acid. On the other hand, tannins exert an inhibitory effect. This study highlights the capacity of LAB to produce volatile phenols and that this activity is markedly influenced by the phenolic composition of the medium. © 2011 The Authors. Journal of Applied Microbiology © 2011 The Society for Applied Microbiology.

  9. Production of hydrocarbons from biomass using the Waterloo fast pyrolysis process

    Energy Technology Data Exchange (ETDEWEB)

    Scott, D.S.

    1991-01-01

    Earlier work has demonstrated the hydrogasification of wood directly at atmospheric pressure in a fluidized bed of nickel catalyst, yielding methane equivalent to 70-75% biomass conversion. The possibility of direct single step production of light hydrocarbons from wood or cellulose by catalytic hydropyrolysis was investigated. A wide rangle of catalytic metals were screened for suitable catalytic activity, and best performance was obtained from Co/Mo catalysts on alumina supports, giving yields up to 24 wt % (of poplar feed) of C[sub 2]+ hydrocarbons, and up to 15 wt % C[sub 4]+ hydrocarbons, representing a ca 40% biomass conversion. Small amounts of methane were produced (4-6%), in addition to 4-12% of heavier hydrocarbons, phenolics, or ketones of low oxygen content. The reaction mechanism is concluded to be thermal pyrolysis followed by catalytic conversion in-situ by the fluidized catalyst. Product spectra can be changed significantly by use of other supports. With alumina, the C[sub 2] to C[sub 7] fraction is highly olefinic, but other supports can increase the yield of aromatics or paraffins. Use of a hydrogen donor atmosphere (propane), and use of synthesis gas did not improve yields. Pressure operation to three atmospheres decreased yields of CH[sub 4], CO and CO[sub 2] while increasing yields of heavy hydrocarbons, phenolics, etc. Use of starches and grains in the Waterloo Fast Pyrolysis Process gave total liquid yields of 80-90%, with 80-90% of starch fed recovered as organic liquid. Catalytic hydropyrolysis of cornstarch, corn kernels and semolina gave poor performance except for granular cornstarch. 10 refs., 9 figs., 22 tabs.

  10. Potential for production of hydrocarbon fuels from crops in Australia

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, G.A.; Hawker, J.S.; Nix, H.A.; Rawlins, W.H.M.; Williams, L.R.

    1982-01-01

    Four species are examined in some detail by extensive literature searches and travel in Australia and the USA. These are Euphorbia lathyris (gopher plant), Asclepias rotundifolia (cotton bush), Calotropis procera (rubber bush) and Parthenium argentatum (guayule). The immediate conclusion is that, except for guayule, the cost of extracted resins from the three species would be 3 to 10 times the cost of oil under Australian conditions. The byproduct lignocellulosic residues have a value dependent on conversion to methanol - but the scale of resin extraction would be too small to be economic for methonol production. The analysis of guayule as a potential economic crop is much more optimistic: The production of resin from guayule appears very favourable, primarily because guayule produces twice as much rubber as resin and the rubber is five times as valuable as crude oil. Included in the booklet is a short survey of resin-containing plants, farming and environmental limitations, and processing technologies. A more extensive analysis of growing Euphorbia lathyris in Western Australia is given.

  11. Development of volatile compounds during storage of different skin care products at various conditions

    DEFF Research Database (Denmark)

    Horn, A. F.; Thomsen, Birgitte Raagaard; Hyldig, Grethe

    Many skin care products contain various lipids to care and soften the skin. These lipids are either saturated or unsaturated. In the case of even small amounts of unsaturated lipids, these are at risk of oxidizing when exposed to heat, light or other conditions with a pro-oxidative effect. When...... a storage experiment on three cleansing milks stored between 14 and 84 days, under different conditions. The samples were exposed to heat (20°C, 40°C and 50°C), light (samples at 20°C) and iron (samples at 40°C). Samples were analysed for their development of volatile compounds by dynamic headspace gas...... stored in the homes of consumers skin care products may be exposed to relatively high temperatures and light. Hence, especially skin care products sold in countries with a warm climate can undergo lipid oxidation and develop volatile compounds with off-odours. This presentation will include results from...

  12. Ubiquitous net volatilization of polycyclic aromatic hydrocarbons from soils and parameters influencing their soil-air partitioning.

    Science.gov (United States)

    Cabrerizo, Ana; Dachs, Jordi; Moeckel, Claudia; Ojeda, María-José; Caballero, Gemma; Barceló, Damià; Jones, Kevin C

    2011-06-01

    Soils are a major reservoir of organic pollutants, and soil-air partitioning and exchange are key processes controlling the regional fate of pollutants. Here, we report and discuss the soil concentrations of polycyclic aromatic hydrocarbons (PAHs), their soil fugacities, the soil-air partition coefficients (K(SA)) and soil-air gradients for rural and semirural soils, in background areas of N-NE Spain and N-NW England. Different sampling campaigns were carried out to assess seasonal variability and differences between sampling sites. K(SA) values were dependent on soil temperature and soil organic quantity and type. Soil fugacities of phenanthrene and its alkyl homologues were 1-2 orders of magnitude higher than their ambient air fugacities for all sampling sites and periods. The soil to air fugacity ratio was correlated with soil temperature and soil redox potential. Similar trends for other PAHs were found but with lower fugacity ratios. The ubiquitous source of PAHs from background soils to the atmosphere found in all temperate regions in different seasons provides an indirect evidence of potential in situ generation of two to four ring PAHs and their alkyl homologues in the surface soil. We discuss this hypothetical biogenic source and other potential processes that could drive the high soil to air fugacity ratios of some PAHs.

  13. Development of urine standard reference materials for metabolites of organic chemicals including polycyclic aromatic hydrocarbons, phthalates, phenols, parabens, and volatile organic compounds.

    Science.gov (United States)

    Schantz, Michele M; Benner, Bruce A; Heckert, N Alan; Sander, Lane C; Sharpless, Katherine E; Vander Pol, Stacy S; Vasquez, Y; Villegas, M; Wise, Stephen A; Alwis, K Udeni; Blount, Benjamin C; Calafat, Antonia M; Li, Zheng; Silva, Manori J; Ye, Xiaoyun; Gaudreau, Éric; Patterson, Donald G; Sjödin, Andreas

    2015-04-01

    Two new Standard Reference Materials (SRMs), SRM 3672 Organic Contaminants in Smokers' Urine (Frozen) and SRM 3673 Organic Contaminants in Non-Smokers' Urine (Frozen), have been developed in support of studies for assessment of human exposure to select organic environmental contaminants. Collaborations among three organizations resulted in certified values for 11 hydroxylated polycyclic aromatic hydrocarbons (OH-PAHs) and reference values for 11 phthalate metabolites, 8 environmental phenols and parabens, and 24 volatile organic compound (VOC) metabolites. Reference values are also available for creatinine and the free forms of caffeine, theobromine, ibuprofen, nicotine, cotinine, and 3-hydroxycotinine. These are the first urine Certified Reference Materials characterized for metabolites of organic environmental contaminants. Noteworthy, the mass fractions of the environmental organic contaminants in the two SRMs are within the ranges reported in population survey studies such as the National Health and Nutrition Examination Survey (NHANES) and the Canadian Health Measures Survey (CHMS). These SRMs will be useful as quality control samples for ensuring compatibility of results among population survey studies and will fill a void to assess the accuracy of analytical methods used in studies monitoring human exposure to these organic environmental contaminants.

  14. Development of urine standard reference materials for metabolites of organic chemicals including polycyclic aromatic hydrocarbons, phthalates, phenols, parabens, and volatile organic compounds

    Science.gov (United States)

    Schantz, Michele M.; Benner, Bruce A.; Heckert, N. Alan; Sander, Lane C.; Sharpless, Katherine E.; Vander Pol, Stacy S.; Vasquez, Y.; Villegas, M.; Wise, Stephen A.; Alwis, K. Udeni; Blount, Benjamin C.; Calafat, Antonia M.; Li, Zheng; Silva, Manori J.; Ye, Xiaoyun; Gaudreau, Éric; Patterson, Donald G.; Sjödin, Andreas

    2016-01-01

    Two new Standard Reference Materials (SRMs), SRM 3672 Organic Contaminants in Smokers’ Urine (Frozen) and SRM 3673 Organic Contaminants in Non-Smokers’ Urine (Frozen), have been developed in support of studies for assessment of human exposure to select organic environmental contaminants. Collaborations among three organizations resulted in certified values for 11 hydroxylated polycyclic aromatic hydrocarbons (OH-PAHs) and reference values for 11 phthalate metabolites, 8 environmental phenols and parabens, and 24 volatile organic compound (VOC) metabolites. Reference values are also available for creatinine and the free forms of caffeine, theobromine, ibuprofen, nicotine, cotinine, and 3-hydroxycotinine. These are the first urine Certified Reference Materials characterized for metabolites of organic environmental contaminants. Noteworthy, the mass fractions of the environmental organic contaminants in the two SRMs are within the ranges reported in population survey studies such as the National Health and Nutrition Examination Survey (NHANES) and the Canadian Health Measures Survey (CHMS). These SRMs will be useful as quality control samples for ensuring compatibility of results among population survey studies and will fill a void to assess the accuracy of analytical methods used in studies monitoring human exposure to these organic environmental contaminants. PMID:25651899

  15. Evidence for neutral-current diffractive neutral pion production from hydrogen in neutrino interactions on hydrocarbon

    CERN Document Server

    Wolcott, J; Altinok, O; Bercellie, A; Betancourt, M; Bodek, A; Bravar, A; Budd, H; Cai, T; Carneiro, M F; Chvojka, J; Devan, J; Dytman, S A; Diaz, G A; Eberly, B; Endress, E; Felix, J; Fields, L; Galindo, R; Gallagher, H; Golan, T; Gran, R; Harris, D A; Higuera, A; Hurtado, K; Kiveni, M; Kleykamp, J; Kordosky, M; Le, T; Maher, E; Manly, S; Mann, W A; Marshall, C M; Caicedo, D A Martinez; McFarland, K S; McGivern, C L; McGowan, A M; Messerly, B; Miller, J; Mislivec, A; Morfin, J G; Mousseau, J; Naples, D; Nelson, J K; Norrick, A; Nuruzzaman,; Paolone, V; Park, J; Patrick, C E; Perdue, G N; Rakotondravohitra, L; Ramirez, M A; Ray, H; Ren, L; Rimal, D; Rodrigues, P A; Ruterbories, D; Schellman, H; Schmitz, D W; Salinas, C J Solano; Sanchez, S F; Tagg, N; Tice, B G; Valencia, E; Walton, T; Wospakrik, M; Zhang, D

    2016-01-01

    The MINERvA experiment observes an excess of events containing electromagnetic showers relative to the expectation from Monte Carlo simulations in neutral-current neutrino interactions with mean beam energy of 4.5 GeV on a hydrocarbon target. The excess is characterized and found to be consistent with neutral-current neutral pion production with a broad energy distribution peaking at 7 GeV and a total cross section of 0.26 +- 0.02 (stat) +- 0.08 (sys) x 10^{-39} cm^{2}. The angular distribution, electromagnetic shower energy, and spatial distribution of the energy depositions of the excess are consistent with expectations from neutrino neutral-current diffractive neutral pion production from hydrogen in the hydrocarbon target. These data comprise the first direct experimental observation and constraint for a reaction that poses an important background process in neutrino oscillation experiments searching for muon neutrino to electron neutrino oscillations.

  16. Solar production of catalytic filamentous carbon by thermal decomposition of hydrocarbons and carbon monoxide

    Energy Technology Data Exchange (ETDEWEB)

    Kirillov, V.A.; Kuvshinov, G.G.; Mogilnykh, Yu.I. [Boreskov Institute of Catalysis, Novosibirsk (Russian Federation); Reller, A. [University of Hamburg (Germany); Steinfeld, A.; Weidenkaff, A.; Meier, A. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    Concentrated solar radiation was used as the clean source of process heat for the production of Catalytic Filamentous Carbon (CFC) by thermal decomposition of gaseous hydrocarbons and by CO disproportionation in the presence of small metal catalyst particles. Depending on the catalyst, two different types of CFC, namely nano tubes and nano fibers, were obtained in solar experiments at the PSI solar furnace. (author) 2 figs., 1 tab., 7 refs.

  17. Coulomb explosion of polycyclic aromatic hydrocarbons induced by heavy cosmic rays: carbon chains production rates

    OpenAIRE

    Chabot, Marin; Béroff, Karine; Dartois, Emmanuel; Pino, Thomas; Godard, Marie

    2017-01-01

    Cosmic Rays (CR) process the matter of the Interstellar Medium. Such energetic processing not only modifies the interstellar matter but also injects chemical species in the gas phase. In this work, we study the effect of the CR on the astrophysical polycyclic aromatic hydrocarbons (PAH). For events in which many electrons are stripped out from the PAH by interaction with a heavy cosmic ray particle, coulomb explosion takes place and carbon chains are produced. The fragments production rates o...

  18. Volatile disinfection by-product analysis from chlorinated indoor swimming pools.

    Science.gov (United States)

    Weaver, William A; Li, Jing; Wen, Yuli; Johnston, Jessica; Blatchley, Michael R; Blatchley, Ernest R

    2009-07-01

    Chlorination of indoor swimming pools is practiced for disinfection and oxidation of reduced compounds that are introduced to water by swimmers. However, there is growing concern associated with formation for chlorinated disinfection by-products (DBPs) in these settings. Volatile DBPs are of particular concern because they may promote respiratory ailments and other adverse health effects among swimmers and patrons of indoor pool facilities. To examine the scope of this issue, water samples were collected from 11 pools over a 6month period and analyzed for free chlorine and their volatile DBP content. Eleven volatile DBPs were identified: monochloramine (NH(2)Cl), dichloramine (NHCl(2)), trichloramine (NCl(3)), chloroform (CHCl(3)), bromoform (CHBr(3)), dichlorobromomethane (CHBrCl(2)), dibromochloromethane (CHBr(2)Cl), cyanogen chloride (CNCl), cyanogen bromide (CNBr), dichloroacetonitrile (CNCHCl(2)), and dichloromethylamine (CH(3)NCl(2)). Of these 11 DBPs, 10 were identified as regularly occurring, with CHBrCl(2) only appearing sporadically. Pool water samples were analyzed for residual chlorine compounds using the DPD colorimetric method and by membrane introduction mass spectrometry (MIMS). These two methods were chosen as complementary measures of residual chlorine, and to allow for comparisons between the methods. The DPD method was demonstrated to consistently overestimate inorganic chloramine content in swimming pools. Pairwise correlations among the measured volatile DBPs allowed identification of dichloromethylamine and dichloroacetonitrile as potential swimming pool water quality indicator compounds.

  19. Air concentrations of volatile compounds near oil and gas production: a community-based exploratory study.

    Science.gov (United States)

    Macey, Gregg P; Breech, Ruth; Chernaik, Mark; Cox, Caroline; Larson, Denny; Thomas, Deb; Carpenter, David O

    2014-10-30

    Horizontal drilling, hydraulic fracturing, and other drilling and well stimulation technologies are now used widely in the United States and increasingly in other countries. They enable increases in oil and gas production, but there has been inadequate attention to human health impacts. Air quality near oil and gas operations is an underexplored human health concern for five reasons: (1) prior focus on threats to water quality; (2) an evolving understanding of contributions of certain oil and gas production processes to air quality; (3) limited state air quality monitoring networks; (4) significant variability in air emissions and concentrations; and (5) air quality research that misses impacts important to residents. Preliminary research suggests that volatile compounds, including hazardous air pollutants, are of potential concern. This study differs from prior research in its use of a community-based process to identify sampling locations. Through this approach, we determine concentrations of volatile compounds in air near operations that reflect community concerns and point to the need for more fine-grained and frequent monitoring at points along the production life cycle. Grab and passive air samples were collected by trained volunteers at locations identified through systematic observation of industrial operations and air impacts over the course of resident daily routines. A total of 75 volatile organics were measured using EPA Method TO-15 or TO-3 by gas chromatography/mass spectrometry. Formaldehyde levels were determined using UMEx 100 Passive Samplers. Levels of eight volatile chemicals exceeded federal guidelines under several operational circumstances. Benzene, formaldehyde, and hydrogen sulfide were the most common compounds to exceed acute and other health-based risk levels. Air concentrations of potentially dangerous compounds and chemical mixtures are frequently present near oil and gas production sites. Community-based research can provide an

  20. Inhibitory Effect of Enterococcus faecium WB2000 on Volatile Sulfur Compound Production by Porphyromonas gingivalis

    OpenAIRE

    Suzuki, Nao; Higuchi, Takuya; Nakajima, Masato; Fujimoto, Akie; Morita, Hiromitsu; Yoneda, Masahiro; Hanioka, Takashi; Hirofuji, Takao

    2016-01-01

    Volatile sulfur compounds (VSCs) produced by oral anaerobes are the major compounds responsible for oral malodor. Enterococcus faecium WB2000 is recognized as an antiplaque probiotic bacterium. In this study, the effect of E. faecium WB2000 on VSC production by Porphyromonas gingivalis was evaluated, and the mechanism of inhibition of oral malodor was investigated. P. gingivalis ATCC 33277 was cultured in the presence of four lactic acid bacteria, including E. faecium WB2000. Subsequently, P....

  1. Potential hazard of volatile organic compounds contained in household spray products

    Science.gov (United States)

    Rahman, Md Mahmudur; Kim, Ki-Hyun

    2014-03-01

    To assess the exposure levels of hazardous volatile pollutants released from common household spray products, a total of 10 spray products consisting of six body spray and four air spray products have been investigated. The body spray products included insect repellents (two different products), medicated patch, deodorant, hair spray, and humectant, whereas the air spray products included two different insecticides (mosquito and/or cockroach), antibacterial spray, and air freshener. The main objective of this study was to measure concentrations of 15 model volatile organic compounds (VOCs) using GC/MS coupled with a thermal desorber. In addition, up to 34 ‘compounds lacking authentic standards or surrogates (CLASS)' were also quantified based on the effective carbon number (ECN) theory. According to our analysis, the most common indoor pollutants like benzene, toluene, styrene, methyl ethyl ketone, and butyl acetate have been detected frequently in the majority of spray products with the concentration range of 5.3-125 mg L-1. If one assumes that the amount of spray products released into air reaches the 0.3 mL level for a given space size of 5 m3, the risk factor is expected to exceed the carcinogenic risk level set for benzene (10-5) by the U.S. EPA.

  2. Volatiles production from the coking of coal; Sekitan no netsubunkai ni okeru kihatsubun seisei

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Y.; Saito, H.; Inaba, A. [National Institute for Resources and Environment, Tsukuba (Japan)

    1996-10-28

    In order to simplify the coke manufacturing process, a coke production mechanism in coal pyrolysis was discussed. Australian bituminous coal which can produce good coke was used for the discussion. At a temperature raising rate of 50{degree}C per minute, coal weight loss increases monotonously. However, in the case of 3{degree}C, the weight loss reaches a peak at a maximum ultimate temperature of about 550{degree}C. The reaction mechanism varies with the temperature raising rates, and in the case of 50{degree}C per minute, volatiles other than CO2 and propane increased. Weight loss of coal at 3{degree}C per minute was caused mainly by methane production at 550{degree}C or lower. When the temperature is raised to 600{degree}C, tar and CO2 increased, and so did the weight loss. Anisotropy was discerned in almost of all coke particles at 450{degree}C, and the anisotropy became remarkable with increase in the maximum ultimate temperature. Coke and volatiles were produced continuously at a temperature raising rate of 50{degree}C per minute, and at 3{degree}C per minute, the production of the coke and volatiles progressed stepwise as the temperature has risen. 7 refs., 6 figs.

  3. Growth and volatile compound production by Brettanomyces/Dekkera bruxellensis in red wine.

    Science.gov (United States)

    Romano, A; Perello, M C; de Revel, G; Lonvaud-Funel, A

    2008-06-01

    Brettanomyces/Dekkera bruxellensis is a particularly troublesome wine spoilage yeast. This work was aimed at characterizing its behaviour in terms of growth and volatile compound production in red wine. Sterile red wines were inoculated with 5 x 10(3) viable cells ml(-1) of three B. bruxellensis strains and growth and volatile phenol production were followed for 1 month by means of plate counts and gas chromatography-mass spectrometry (GC-MS) respectively. Maximum population levels generally attained 10(6)-10(7) colony forming units (CFU) ml(-1) and volatile phenol concentrations ranged from 500 to 4000 microg l(-1). Brettanomyces bruxellensis multiplication was also accompanied by the production of organic acids (from C(2) to C(10)), short chain acid ethyl-esters and the 'mousy off-flavour' component 2-acetyl-tetrahydropyridine. Different kinds of 'Brett character' characterized by distinct metabolic and sensory profiles can arise in wine depending on the contaminating strain, wine pH and sugar content and the winemaking stage at which contamination occurs. We identified new chemical markers that indicate wine defects caused by B. bruxellensis. Further insight was provided into the role of some environmental conditions in promoting wine spoilage.

  4. Apparatus for hydrogen and carbon production via carbon aerosol-catalyzed dissociation of hydrocarbons

    Science.gov (United States)

    Muradov, Nazim Z. (Inventor); Smith, Franklyn (Inventor); Tabatabaie-Raissi, Ali (Inventor)

    2012-01-01

    A novel process and apparatus is disclosed for sustainable, continuous production of hydrogen and carbon by catalytic dissociation or decomposition of hydrocarbons at elevated temperatures using in-situ generated carbon particles. Carbon particles are produced by decomposition of carbonaceous materials in response to an energy input. The energy input can be provided by at least one of a non-oxidative and oxidative means. The non-oxidative means of the energy input includes a high temperature source, or different types of plasma, such as, thermal, non-thermal, microwave, corona discharge, glow discharge, dielectric barrier discharge, or radiation sources, such as, electron beam, gamma, ultraviolet (UV). The oxidative means of the energy input includes oxygen, air, ozone, nitrous oxide (NO.sub.2) and other oxidizing agents. The method, apparatus and process of the present invention is applicable to any gaseous or liquid hydrocarbon fuel and it produces no or significantly less CO.sub.2 emissions compared to conventional processes.

  5. Hydrogen production by reforming of hydrocarbons and alcohols in a dielectric barrier discharge

    Energy Technology Data Exchange (ETDEWEB)

    Sarmiento, Belen; Brey, J. Javier; Viera, Inmaculada G. [Hynergreen Technologies, S.A. Avda. de la Buhaira, 2. 41018 Sevilla (Spain); Gonzalez-Elipe, Agustin R.; Cotrino, Jose; Rico, Victor J. [Instituto de Ciencia de los Materiales de Sevilla (CSIC-University Sevilla), Avda. Americo Vespucio, 49, 41092 Sevilla (Spain)

    2007-06-10

    This work reports about the use of plasmas to obtain hydrogen by reforming of hydrocarbons or alcohols in mixtures with CO{sub 2} or H{sub 2}O. The plasma is activated in a dielectric barrier discharge (DBD) reactor working at atmospheric pressure and low temperatures (i.e., about 100 C). The reactor presents a great versatility in operation and a low manufacturing cost. Results are presented for the reforming of methane, methanol and ethanol. Methane transforms up to a 70% into CO and H{sub 2} without formation of any kind of superior hydrocarbon. For the two alcohols 100% conversion into the same products is found for flows much higher than in the case of methane. The work reports a description of the reactor and the operational conditions of the power supply enabling the ignition of the plasma and its steady state operation. (author)

  6. Volatile profile, lipid oxidation and protein oxidation of irradiated ready-to-eat cured turkey meat products

    Science.gov (United States)

    Feng, Xi; Ahn, Dong Uk

    2016-10-01

    Irradiation had little effects on the thiobarbituric acid reactive substances (TBARS) values in ready-to-eat (RTE) turkey meat products, while it increased protein oxidation at 4.5 kGy. The volatile profile analyses indicated that the amount of sulfur compounds increased linearly as doses increased in RTE turkey meat products. By correlation analysis, a positive correlation was found between benzene/ benzene derivatives and alcohols with lipid oxidation, while aldehydes, ketones and alkane, alkenes and alkynes were positively correlated with protein oxidation. Principle component analysis showed that irradiated meat samples can be discriminated by two categories of volatile compounds: Strecker degradation products and radiolytic degradation products. The cluster analysis of volatile data demonstrated that low-dose irradiation had minor effects on the volatile profile of turkey sausages (<1.5 kGy). However, as the doses increased, the differences between the irradiated and non-irradiated cured turkey products became significant.

  7. Production of low molecular weight hydrocarbons by volcanic eruptions on early Mars.

    Science.gov (United States)

    Segura, Antígona; Navarro-González, Rafael

    2005-10-01

    Methane and other larger hydrocarbons have been proposed as possible greenhouse gases on early Mars. In this work we explore if volcanic processes may have been a source for such molecules based on theoretical and experimental considerations. Geologic evidence and numerical simulations indicate that explosive volcanism was widely distributed throughout Mars. Volcanic lightning is typically produced in such explosive volcanism. Therefore this geologic setting was studied to determine if lightning could be a source for hydrocarbons in volcanic plumes. Volcanic lightning was simulated by focusing a high-energy infrared laser beam inside of a Pyrex reactor that contained the proposed volcanic gas mixture composed of 64% CH(4), 24% H(2), 10% H(2)O and 2% N(2), according to an accretion model and the nitrogen content measured in Martian meteorites. The analysis of products was performed by gas chromatography coupled to infrared and mass spectroscopy. Eleven hydrocarbons were identified among the products, of which acetylene (C(2)H(2)) was the most abundant. A thermochemical model was used to determine which hydrocarbons could arise only from volcanic heat. In this case, acetylene and ethylene are formed at magmatic temperatures. Our results indicate that explosive volcanism may have injected into the atmosphere of early Mars approximately 6 x 10(12) g yr(-1) of acetylene, and approximately 2 x 10(12) g yr(-1) of 1,3-butadiyne, both produced by volcanic lightning, approximately 5 x 10(11) g yr(-1) of ethylene produced by volcanic heat, and 10(13) g yr(-1) of methane.

  8. Simultaneous determination of volatile and non-volatile nitrosamines in processed meat products by liquid chromatography tandem mass spectrometry using atmospheric pressure chemical ionisation and electrospray ionisation

    DEFF Research Database (Denmark)

    Herrmann, Susan Strange; Duedahl-Olesen, Lene; Granby, Kit

    2014-01-01

    A sensitive, selective and generic method has been developed for the simultaneous determination of the contents (μgkg−1 range) of both volatile nitrosamines (VNA) and non-volatile nitrosamines (NVNA) in processed meat products. The extraction procedure only requires basic laboratory equipment...... and a small volume of organic solvent. Separation and quantification were performed by the developed LC–(APCI/ESI)MS/MS method. The method was validated using spiked samples of three different processed meat products. Satisfactory recoveries (50–130%) and precisions (2–23%) were obtained for eight VNA and six...... NVNAs with LODs generally between 0.2 and 1μgkg−1, though for a few analyte/matrix combinations higher LODs were obtained (3 to 18μgkg−1). The validation results show that results obtained for one meat product is not always valid for other meat products. We were not able to obtain satisfactory results...

  9. [Analysis of aromatic hydrocarbons in cracking products of jet fuel by comprehensive two-dimensional gas chromatography-mass spectrometry].

    Science.gov (United States)

    Li, Haijing; Zhang, Xiangwen

    2017-08-08

    As coking precursors, aromatic hydrocarbons have an effect on the cracking stability of fuels. A method for identifying and quantitating aromatics in the supercritical cracking products of jet fuel was established by comprehensive two-dimensional gas chromatography coupled with mass spectrometry (GC×GC-MS). The effects of main chromatographic conditions such as initial oven temperature and modulation period on the separation of supercritical cracking products were studied. The method has good separation ability for polycyclic aromatic hydrocarbons (PAH) isomers. A total of 27 aromatics, including monocyclic aromatic hydrocarbons, bicyclic aromatic hydrocarbons, tricyclic aromatic hydrocarbons, tetracyclic aromatic hydrocarbons, etc., were identified based on standard mass spectra, the retention times of standards and literature reports. Moreover, the corresponding quantitative determination was achieved by external standard method of GC×GC-FID. The results showed that the contents of aromatics increased with the increase of gas yield. When gas yield reached 22%, the bicyclic aromatic hydrocarbons began to produce, and their contents increased exponentially with the increase of gas yield. Compared with the traditional GC-MS, the method has better separation and qualitative ability, and can be applied to the separation of complex samples and qualitative and quantitative analyses of cracking products.

  10. Kinetics of coal combustion: Part 2, Mechanisms and kinetics of coal volatiles combustion

    Energy Technology Data Exchange (ETDEWEB)

    Gat, N.; Wolff, M. F.; Petach, M. B. [TRW Space and Technology Group, Redondo Beach, CA (USA)

    1988-12-01

    Presently very little is known about the combustion characteristics of mixtures of hydrocarbon fuels. Even less is known about the combustion of coal volatiles which are complex mixtures of light and high molecular weight hydrocarbons. This issue pertains not only to coal volatiles but also to the combustion of synthetic fuels, liquefaction and coal gasification products. The subject in general has been given very little attention in the literature. As a consequence, current modeling methods are based on assumptions which are not thoroughly validated and verified. The current investigation addressed this very problem of the combustion of mixtures of hydrocarbon fuels. 29 refs., 35 figs., 5 tabs.

  11. Investigation the Impact of Exchange Rate Volatility on the Export of Agricultural Products

    Directory of Open Access Journals (Sweden)

    M. Jamalipour

    2016-10-01

    coefficients. Results and Discussion: Main results showed that real exchange rate volatility and export value of selected commodities are Co-integrated. The coefficient estimation of FMOLS and DOLS methods are equal and statically significant; so, these methods aren’t statically different and they showed that real exchange rate volatility has a negative impact on exported value for whole panel. However, the specific coefficient for each commodity showed contradictory behavior in short run and long run; for example real exchange rate fluctuation has a negative and significant impact on all the commodities; but, in short run this variable has a positive and significant impact on exported value. Moreover, based on estimated results it seems that fluctuation in exchange market has a greater impact on more valuable commodities like date. Conclusion: Considering the importance of agricultural product trade and in order to overcome mono-product economy, this study investigated long term and short term relation between export of grape, orange, date and exchange rate volatilities. To this aim, first the index of exchange volatility using generated autoregressive conditional heteroscedasticity (GARCH was calculated. In order to investigate the relation between exchange rate volatilities and export value of agricultural product, unit root test and cointegration test related to panel data were used during years 1971-2013. The results of model estimation showed that exchange rate volatilities in short term and long term have respectively positive and negative effects on the export value of orange, grape and date. In long term, the negative effects of Exchange rate volatilities on high-export-value products are more than its effects on low-export-value products. Based on the estimation results we can conclude that, in short run, exporters are willing to increase their interchange and gain profits of the volatility in exchange market; however, in long run exchange rate fluctuation has

  12. Optimization of process parameters for production of volatile fatty acid, biohydrogen and methane from anaerobic digestion.

    Science.gov (United States)

    Khan, M A; Ngo, H H; Guo, W S; Liu, Y; Nghiem, L D; Hai, F I; Deng, L J; Wang, J; Wu, Y

    2016-11-01

    The anaerobic digestion process has been primarily utilized for methane containing biogas production over the past few years. However, the digestion process could also be optimized for producing volatile fatty acids (VFAs) and biohydrogen. This is the first review article that combines the optimization approaches for all three possible products from the anaerobic digestion. In this review study, the types and configurations of the bioreactor are discussed for each type of product. This is followed by a review on optimization of common process parameters (e.g. temperature, pH, retention time and organic loading rate) separately for the production of VFA, biohydrogen and methane. This review also includes additional parameters, treatment methods or special additives that wield a significant and positive effect on production rate and these products' yield. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Autotrophic cultivation of Botryococcus braunii for the production of hydrocarbons and exopolysaccharides in various media

    Energy Technology Data Exchange (ETDEWEB)

    Dayananda, C.; Sarada, R.; Ravishankar, G.A. [Plant Cell Biotechnology Department, Central Food Technological Research Institute, Mysore 570 020 (India); Usha Rani, M.; Shamala, T.R. [Food Microbiology Department, Central Food Technological Research Institute, Mysore 570 020 (India)

    2007-01-15

    Growth of Botryococcus braunii was studied using different autotrophic media such as bold basal medium (BBM), and bold basal with ammonium carbonate (BBMa), BG11, modified Chu 13 medium. Among the different autotrophic media used, BG11 was found to be the best medium for biomass and hydrocarbon production, although B. braunii showed appreciable level of growth and biomass production in all the tested media. The culture maintained at 16:8h light and dark cycle with 1.2+/-0.2klux light intensity at 25+/-1{sup o}C temperature was found to be the best for growth (2.0 and 2.8gL{sup -1} of biomass was produced by the B. braunii strains SAG 30.81 and LB-572, respectively) and hydrocarbon production (46% and 33%, respectively, by SAG 30.81 and LB 572 strains on dry weight basis) whereas continuous illumination with agitation at 90rpm had maximum influence for the production of exopolysaccharides. The results of the present study indicate that the organism can acclimatize to different culture conditions and to a wide range of culture media with production of more than one metabolite. (author)

  14. Influence of various growth parameters on fungal growth and volatile metabolite production by indoor molds.

    Science.gov (United States)

    Polizzi, Viviana; Adams, An; De Saeger, Sarah; Van Peteghem, Carlos; Moretti, Antonio; De Kimpe, Norbert

    2012-01-01

    A Penicillium polonicum, an Aspergillus ustus and a Periconia britannica strain were isolated from water-damaged environments and the production of microbial volatile organic compounds (MVOCs) was investigated by means of headspace solid-phase microextraction followed by GC-MS analysis. The most important MVOCs produced were 2-methylisoborneol, geosmin and daucane-type sesquiterpenes for P. polonicum, 1-octen-3-ol, 3-octanone, germacrene D, δ-cadinene and other sesquiterpenes for A. ustus and the volatile mycotoxin precursor aristolochene together with valencene, α-selinene and β-selinene for P. britannica. Different growth conditions (substrate, temperature, relative humidity) were selected, resembling indoor parameters, to investigate their influence on fungal metabolism in relation with the sick building syndrome and the results were compared with two other fungal strains previously analyzed under the same conditions. In general, the range of MVOCs and the emitted quantities were larger on malt extract agar than on wallpaper and plasterboard, but, overall, the main MVOC profile was conserved also on the two building materials tested. The influence of temperature and relative humidity on growth and metabolism is different for different fungal species, and two main patterns of behavior could be distinguished. Results show that, even at suboptimal conditions for growth, production of fungal volatiles can be significant. Copyright © 2011 Elsevier B.V. All rights reserved.

  15. Determination of volatile polycyclic aromatic hydrocarbons in waters using headspace solid-phase microextraction with a benzyl-functionalized crosslinked polymeric ionic liquid coating.

    Science.gov (United States)

    Merdivan, Melek; Pino, Verónica; Anderson, Jared L

    2017-08-01

    A benzyl-functionalized crosslinked polymeric ionic liquid (PIL), produced through the co-polymerization of the 1-vinylbenzyl-3-hexadecylimidazolium bis[(trifluoromethyl)sulfonyl]imide (VBHDIM-NTf2) ionic liquid (IL) monomer and 1,12-di(3-vinylbenzylimidazolium)dodecane bis[(trifluoromethyl)sulfonyl]imide ((DVBIM)2C12-2NTf2) IL crosslinker, was successfully used as a sorbent coating in headspace solid-phase microextraction (SPME) coupled to gas chromatography (GC) with flame-ionization detection (FID) to determine seven volatile polycyclic aromatic hydrocarbons (PAHs) in environmental water samples. Optimum extraction conditions for the PAHs when using the novel sorbent include an extraction temperature of 50°C, an ionic strength content adjusted with 30% (w/v) NaCl in the aqueous sample, and an extraction time of 60 min. The extraction performance of the crosslinked PIL fiber was compared to the SPME commercial coating polydimethylsiloxane fiber. The calibration ranges of the studied PAHs were linear in the range of 0.02-20 µg L-1 for the crosslinked PIL fiber. The accuracy of the proposed method was demonstrated by examining the spiked recoveries of seven PAHs which produced values ranging from 67.2% to 130% (for river- and seawater samples), and precision values lower than 9.4% for a spiked level of 1 µg L-1, and detection limits between 0.01 and 0.04 µg L-1, which supports the sensitivity of the method using GC-FID.

  16. Production of volatile and sulfur compounds by ten Saccharomyces cerevisiae strains inoculated in Trebbiano must

    Directory of Open Access Journals (Sweden)

    Francesca ePatrignani

    2016-03-01

    Full Text Available In wines, the presence of sulphur compounds is the resulting of several contributions among which yeast metabolism. The characterization of the starter Saccharomyces cerevisiae needs to be performed also taking into account this ability even if evaluated together with the overall metabolic profile. In this perspective, principal aim of this experimental research was the evaluation of the volatile profiles, throughout GC/MS technique coupled with solid phase micro extraction, of wines obtained throughout the fermentation of 10 strains of Saccharomyces cerevisiae. In addition, the production of sulphur compounds was further evaluated by using a gas-chromatograph coupled with a Flame Photometric Detector. Specifically, the ten strains were inoculated in Trebbiano musts and the fermentations were monitored for 19 days. In the produced wines, volatile and sulphur compounds as well as amino acid concentrations were investigated. Also the physico-chemical characteristics of the wines and their electronic nose profiles were evaluated.

  17. Production of a New Emulsifier Material for the Formation Heavy Hydrocarbon/Water Emulsion

    Directory of Open Access Journals (Sweden)

    Afshin Farahbakhsh

    2011-04-01

    Full Text Available Emulsifiers are a unique class of compounds that have proved to have a variety of potential applications in formation of hydrocarbon in water emulsion, in enhancement of oil recovery and in the reduction of heavy oil viscosity. In this paper, a bio emulsifier was synthesized by a strain of Bacillus licheniformis and was separated by an autoclave and centrifugal process; the purification of bio emulsifier and the increase quality of product was done by adding sulfuric acid (H2SO4 (98% to the solution and centrifuging this compound again. This bio emulsifier has the property of emulsification to a wide range of heavy hydrocarbon to form a stable hydrocarbon-water emulsion. This bio emulsifier could reduce Iranian Nuroze high viscosity oil of about 10000 cP down to 250 cP. This means about 97% decreases in the viscosity. The emulsion stable this condition for 48 hr and the viscosity slowly increases to 4000cp until 192 hr. The stability of the oil in water emulsion during 48hr allows the heavy oil to be transported practically over lengthy distances or remain stable for long periods of time prior to utilization.

  18. Production of biosurfactant by hydrocarbon degrading Rhodococcus ruber and Rhodococcus erythropolis

    Directory of Open Access Journals (Sweden)

    Bicca Flávio Correa

    1999-01-01

    Full Text Available There is world wide concern about the liberation of hydrocarbons in the environment, both from industrial activities and from accidental spills of oil and oilrelated compounds. Biosurfactants, which are natural emulsifiers of hydrocarbons, are produced by some bacteria, fungi and yeast. They are polymers, totally or partially extracellular, with an amphipathyc structure, which allows them to form micelles that accumulate at the interface between liquids of different polarities such as water and oil. This process is based upon the ability of biosurfactants to reduce surface tension, blocking the formation of hydrogen bridges and certain hydrophilic and hydrophobic interactions. The ability of biosurfactant production by five strains of Rhodococcus isolated from oil prospecting sites was evaluated. Surface tension measurement and emulsifying index were used to quantify biosurfactant production. The influence of environmental conditions was also investigated - pH, temperature, medium composition, and type of carbon source - on cell growth and biosurfactant production. Strain AC 239 was shown to be a potential producer, attaining 63% of emulsifying index for a Diesel-water binary system. It could be used, either directly on oil spills in contained environments, or for the biotechnological production of biosurfactant.

  19. Microbial production of volatile sulphur compounds in the large intestine of pigs fed two different diets

    DEFF Research Database (Denmark)

    Poulsen, Henrik Vestergaard; Jensen, Bent Borg; Finster, Kai

    2012-01-01

    Aims: To investigate the production of volatile sulphur compounds (VSC) in segments of the large intestine of pigs and to assess the impact of diet on this production. Methods and Results: Pigs were fed two diets based on either wheat and barley (STD) or wheat and dried distillers grains...... increase along the large intestine, whereas no diet-related differences were observed. Conclusion: VSC net production varies widely throughout the large intestine of pigs and the microbial processes involved in this production can be affected by diet. Significance and Impact of the study: This first report...... on intestinal production of all VSC shows both spatial and dietary effects, which are relevant to both bowel disease- and odour mitigation research....

  20. Design and Testing of a Labview- Controlled Catalytic Packed- Bed Reactor System For Production of Hydrocarbon Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Street, J.; Yu, F.; Warnock, J.; Wooten, J.; Columbus, E.; White, M. G.

    2012-05-01

    Gasified woody biomass (producer gas) was converted over a Mo/H+ZSM-5 catalyst to produce gasolinerange hydrocarbons. The effect of contaminants in the producer gas showed that key retardants in the system included ammonia and oxygen. The production of gasoline-range hydrocarbons derived from producer gas was studied and compared with gasoline-range hydrocarbon production from two control syngas mixes. Certain mole ratios of syngas mixes were introduced into the system to evaluate whether or not the heat created from the exothermic reaction could be properly controlled. Contaminant-free syngas was used to determine hydrocarbon production with similar mole values of the producer gas from the gasifier. Contaminant-free syngas was also used to test an ideal contaminant-free synthesis gas situation to mimic our particular downdraft gasifier. Producer gas was used in this study to determine the feasibility of using producer gas to create gasoline-range hydrocarbons on an industrial scale using a specific Mo/H+ZSM-5 catalyst. It was determined that after removing the ammonia, other contaminants poisoned the catalyst and retarded the hydrocarbon production process as well.

  1. Methylidyne radical reactions with hydrocarbons: kinetics at low temperature and product branching ratios

    Science.gov (United States)

    Bergeat, Astrid; Caubert, Philippe; Costes, Michel; Daugey, Nicolas; Loison, Jean-Christophe

    CH radical reactions with hydrocarbons could play a role in the atmospheres of Titan, Pluto or Triton as well as in interstellar clouds (ISCs), where the hydrocarbon compounds were detected and the temperatures are very low, i.e. ~ 95 K down to ~ 38 K at the surface of these satellites and planet and from 50 K down to 10 K in ISCs. In fact, in modelling the processes occurring in these low-temperature environments, researchers generally still have to extrapolate the high-temperature kinetic data mainly obtained in the temperature range above 300 K. However, for many neutral-neutral reactions studied, the rate constants exhibit essentially non-Arrhenius behaviour at low temperatures. The temperature dependences of the methylidyne radical reactions with methane, allene, methylacetylene and propene were studied in our new supersonic flow reactor coupled with pulsed laser photolysis (PLP) and laser induced fluorescence (LIF) techniques. Three Laval nozzles were designed to provide uniform supersonic expansions down to 77 K. The rate constants for the CH + CH4 reaction are in good agreement with the temperature dependence proposed by A. Canosa et al., i.e. 3.96 × 10-8 ×(T/K)-1.04 exp(-36.1K/T) in the range 23-298 K. The rate constants of the CH + C3H4 (allene), CH + C3H4 (methylacetylene) and CH + C3H6 (propene) reactions exhibit a small temperature dependence between 77 and 170 K, are close to the gas kinetic limit and could thus contribute to the chemistry in the dense molecular clouds or outer planets atmospheres (Titan, Pluto and Triton for example) rich in hydrocarbons. The reactions of CH radical with several saturated and unsaturated hydrocarbons were studied, at room temperature, in a low-pressure fast-flow reactor. The absolute atomic hydrogen productions were determined at 300 K by V.U.V. resonance fluorescence, the reference used being the H production from the CH + CH4 and H2S reactions. Ab initio studies of the different stationary points relevant to some

  2. Volatile fatty acids production from anaerobic treatment of cassava waste water: effect of temperature and alkalinity.

    Science.gov (United States)

    Hasan, Salah Din Mahmud; Giongo, Citieli; Fiorese, Mônica Lady; Gomes, Simone Damasceno; Ferrari, Tatiane Caroline; Savoldi, Tarcio Enrico

    2015-01-01

    The production of volatile fatty acids (VFAs), intermediates in the anaerobic degradation process of organic matter from waste water, was evaluated in this work. A batch reactor was used to investigate the effect of temperature, and alkalinity in the production of VFAs, from the fermentation of industrial cassava waste water. Peak production of total volatile fatty acids (TVFAs) was observed in the first two days of acidogenesis. A central composite design was performed, and the highest yield (3400 mg L(-1) of TVFA) was obtained with 30°C and 3 g L(-1) of sodium bicarbonate. The peak of VFA was in 45 h (pH 5.9) with a predominance of acetic (63%) and butyric acid (22%), followed by propionic acid (12%). Decreases in amounts of cyanide (12.9%) and chemical oxygen demand (21.6%) were observed, in addition to the production of biogas (0.53 cm(3) h(-1)). The process was validated experimentally and 3400 g L(-1) of TVFA were obtained with a low relative standard deviation.

  3. Bioelectrochemical recovery of waste-derived volatile fatty acids and production of hydrogen and alkali

    DEFF Research Database (Denmark)

    Zhang, Yifeng; Angelidaki, Irini

    2015-01-01

    Volatile fatty acids (VFA) are organic compounds of great importance for various industries and environmental processes. Fermentation and anaerobic digestion of organic wastes are promising alternative technologies for VFA production. However, one of the major challenges is development of sustain......Volatile fatty acids (VFA) are organic compounds of great importance for various industries and environmental processes. Fermentation and anaerobic digestion of organic wastes are promising alternative technologies for VFA production. However, one of the major challenges is development...... of sustainable downstream technologies for VFA recovery. In this study, an innovative microbial bipolar electrodialysis cell (MBEDC) was developed to meet the challenge of waste-derived VFA recovery, produce hydrogen and alkali, and potentially treat wastewater. The MBEDC was operated in fed-batch mode...... was successfully verified with digestate. These results demonstrate for the first time the possibility of a new method for waste-derived VFA recovery and valuable products production that uses wastewater as fuel and bacteria as catalyst. © 2015 Elsevier Ltd. All rights reserved....

  4. The Impact of Single Amino Acids on Growth and Volatile Aroma Production by Saccharomyces cerevisiae Strains

    Directory of Open Access Journals (Sweden)

    Samantha Fairbairn

    2017-12-01

    Full Text Available Nitrogen availability and utilization by Saccharomyces cerevisiae significantly influence fermentation kinetics and the production of volatile compounds important for wine aroma. Amino acids are the most important nitrogen source and have been classified based on how well they support growth. This study evaluated the effect of single amino acids on growth kinetics and major volatile production of two phenotypically different commercial wine yeast strains in synthetic grape must. Four growth parameters, lag phase, maximum growth rate, total biomass formation and time to complete fermentation were evaluated. In contrast with previous findings, in fermentative conditions, phenylalanine and valine supported growth well and asparagine supported it poorly. The four parameters showed good correlations for most amino acid treatments, with some notable exceptions. Single amino acid treatments resulted in the predictable production of aromatic compounds, with a linear correlation between amino acid concentration and the concentration of aromatic compounds that are directly derived from these amino acids. With the increased complexity of nitrogen sources, linear correlations were lost and aroma production became unpredictable. However, even in complex medium minor changes in amino acid concentration continued to directly impact the formation of aromatic compounds, suggesting that the relative concentration of individual amino acids remains a predictor of aromatic outputs, independently of the complexity of metabolic interactions between carbon and nitrogen metabolism and between amino acid degradation and utilization pathways.

  5. Emissions and Secondary Organic Aerosol Production from Semivolatile and Intermediate Volatility Organic Compounds

    Science.gov (United States)

    Robinson, A. L.; Presto, A. A.; Miracolo, M. A.; Donahue, N. M.; Kroll, J. H.; Worsnop, D. R.

    2008-12-01

    Organic aerosols are a highly-dynamic system dominated by both variable gas-particle partitioning and chemical evolution. Important classes of organics include semivolatile and intermediate volatility organic compounds (SVOC and IVOC, respectively). SVOCs are compounds that exist in both the gas and particle phases at typical atmospheric conditions while IVOC are low-volatility vapors that exist exclusively in the gas phase. Both classes have saturation concentrations that are orders of magnitude lower than volatile organic compounds (VOC) that are the traditional subjects of atmosphere chemistry, such as monoterpenes, alkyl benzenes, etc. The SVOC and IVOC are poorly represented for in current atmospheric chemistry models. Source testing indicates that SVOC and IVOC emissions from biomass combustion, diesel engines and other sources exceed the primary organic aerosol emissions; thus the oxidation of these vapors could serve as a significant source of organic aerosol in the atmosphere. The formation of secondary organic aerosol (SOA) from the reactions between OH radicals and SVOCs and IVOCs was investigated in the Carnegie Mellon University smog chamber. Experiments were conducted with n-alkanes and emission surrogates (diesel fuel and lubricating oil). SVOC oxidation produces oxidized organic aerosol but little new organic aerosol mass. This behavior can be explained by the coupled effects of partitioning and aging. Oxidation of SVOC vapors creates low volatility species that partition into the condensed phase; this oxidation also reduces the SVOC vapor concentration which, in turn, requires particle-phase SVOC to evaporate to maintain phase equilibrium. In contrast, oxidation of IVOC results in sustained production of SOA consistent with a reaction with relatively slow kinetics and high mass yield. Aerosol Mass Spectrometer data indicates that the SOA formed from IVOC has a mass spectrum that is quite similar to the oxygenated organic aerosol factor observed in

  6. Effect of food matrix and pH on the volatilization of bases (TVB) in packed north Atlantic gray shrimp (Crangon crangon): volatile bases in MAP fishery products.

    Science.gov (United States)

    Noseda, Bert; Dewulf, Jo; Goethals, Joke; Ragaert, Peter; Van Bree, Ilse; Pauwels, Danny; Van Langenhove, Herman; Devlieghere, Frank

    2010-11-24

    The total volatile basic nitrogen fraction (TVB-N) is often used as a quality parameter in the fish industry to assess spoilage. This parameter often leads to discussions between producers and retailers when it comes to defining clear limits of acceptability for modified atmosphere (MA) packed fish and fishery products. Suggested product limits (mg N/100 g fish) do not always correlate with the presence of off-odors. Gray shrimp are an economic valuable, very perishable niche product, where the TVB-N fraction plays an important role considering its shelf life. This research focuses on the effect of a shrimp matrix and its pH on the volatilization of these formed bases, revealing the relationship between concentrations in the fishery product and the concentrations of these bases present in the headspace of the packed product. Especially, the pH of the product, which is lowered when fishery products are packed under a carbon dioxide enriched atmosphere, appeared to have an immense effect on the volatilization of these bases. The effect of the fish matrix itself is established by means of calculated equilibration constants (dimensionless) being 2.13×10(-4)±0.38×10(-4) for trimethylamine, 6.34×10(-5)±1.71×10(-5) for dimethylamine, and 2.58×10(-5)±0.49×10(-5) for ammonia. Comparison of these constants with the equilibration constants of an aqueous solution indicated the retention of these bases in the product. This article provides not only the important insights for the interpretation of TVB-N values in modified atmosphere packaged gray shrimp but also the methodology to extend these findings to other fish and fishery products.

  7. Three Essays in the Public Economics of Offshore Hydrocarbon Investment and Production

    Science.gov (United States)

    Kearney, Owen P.

    Offshore sources, in both shallow and deep waters, are increasingly important contributors to global oil and natural gas production. As both resource owner and taxing authority, national governments play an important role in the production of these offshore hydrocarbons. How the policy choices of these governments affect firm behavior, however, is not necessarily well understood. This dissertation contributes to our knowledge of how public policy influences offshore hydrocarbon investment and production. In the first essay, I estimate the investment responses of hydrocarbon producers to the suspension of the royalty, a type of production tax levied on production from federal lands. I find that the potential for a royalty payments waiver: (1) increases the probability that an individual tract is acquired by an average of 193% (a mean increase of 5.6 percentage points); (2) decreases the probability that a lease is ever drilled during its observed lease term by an average of 14.5% (a mean decrease of 1.3 percentage points); and (3) increases the expected number of explored leases by 150%. The introduction of DWRRA also increases the average winning bid per lease by 60%. These estimates quantify the magnitudes of the discouraging effects of production taxation on oil and natural gas investment. In the second essay, I quantify the implied value of information spillovers in oil and natural gas exploration using an event study design. I find that 25 trading days after a discovery, firms that own leases adjacent to the discovery lease (but not the discovery lease, itself) realize an average abnormal return translating to 315 million in market capitalization. This effect is quantitatively large compared to costs for drilling an exploratory well. In the final essay, I measure how oil price affects water injection, a method for prolonging the productive lifetime of oil fields. I find that a 1 rise in price increases the water injected into the well's reservoir by

  8. Volatilization of low vapor pressure--volatile organic compounds (LVP-VOCs) during three cleaning products-associated activities: Potential contributions to ozone formation.

    Science.gov (United States)

    Shin, Hyeong-Moo; McKone, Thomas E; Bennett, Deborah H

    2016-06-01

    There have been many studies to reduce ozone formation mostly from volatile organic compound (VOC) sources. However, the role of low vapor pressure (LVP)-VOCs from consumer products remains mostly unexplored and unaddressed. This study explores the impact of high production volume LVP-VOCs on ozone formation from three cleaning products-associated activities (dishwashing, clothes washing, and surface cleaning). We develop a model framework to account for the portion available for ozone formation during the use phase and from the down-the-drain disposal. We apply experimental studies that measured emission rates or models that were developed for estimating emission rates of organic compounds during the use phase. Then, the fraction volatilized (fvolatilized) and the fraction disposed down the drain (fdown-the-drain) are multiplied by the portion available for ozone formation for releases to the outdoor air (fO3|volatilized) and down-the-drain (fO3|down-the-drain), respectively. Overall, for chemicals used in three specific cleaning-product uses, fvolatilized is less than 0.6% for all studied LVP-VOCs. Because greater than 99.4% of compounds are disposed of down the drain during the use phase, when combined with fO3|volatilized and fO3|down-the-drain, the portion available for ozone formation from the direct releases to outdoor air and the down-the-drain disposal is less than 0.4% and 0.2%, respectively. The results from this study indicate that the impact of the studied LVP-VOCs on ozone formation is very sensitive to what occurs during the use phase and suggest the need for future research on experimental work at the point of use. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Reforming sewage sludge pyrolysis volatile with Fe-embedded char: Minimization of liquid product yield.

    Science.gov (United States)

    Yu, Guotao; Chen, Dezhen; Arena, Umberto; Huang, Zhen; Dai, Xiaohu

    2017-08-10

    Obtaining high quality syngas from sewage sludge (SS) means transferring a low-grade SS into a high-grade fuel or raw materials for chemical products. In this study, Fe is added to SS in form of Fe2(SO4)3 to produce an effective and self-sufficient catalyst in order to obtain more syngas and minimize liquid products from SS pyrolysis. The Fe-embedded sewage sludge chars (SSCs) were used as catalysts for volatile reforming at 600°C. It has been found that the gas yield increases from 15.9 to 35.8wt% of the SS and that of liquids decreases from 31.9 to 10.2wt% after volatile reforming with Fe-embedded SSC when Fe was added equal to 7 % in the dried SS. In addition, the content of nitrogen-containing compounds in the oily products decreased. After reforming with Fe-embedded SSC, the molar fractions of syngas combustible components, including H2, CH4 and CO, increase, and the higher heating value of the syngas increased to 17.0MJ/Nm(3) from the original 12.5MJ/Nm(3) obtained from SS pyrolysis at 550°C. Moreover, the volatile reforming seems to reduce the level of some important syngas pollutants, like H2S, HCl and HCN, even though it was also observed an increase of the contents of SO2, NH3, NO2, HCNO and N2O. Copyright © 2017. Published by Elsevier Ltd.

  10. Expected stock returns and volatility in a production economy: a theory and some evidence

    OpenAIRE

    Singal, Padamja; Smith, Stephen D.

    1999-01-01

    The sign of the relationship between expected stock market returns and volatility appears to vary over time, a result that seems at odds with basic notions of risk and return. In this paper we construct an economy where production involves the use of both labor and capital as inputs. We show that when capital investment is "sticky," the sign of the relation between stock market risk and return varies in accordance with the supply of labor but requires no time variation in preferences. In part...

  11. Estimation of the Accuracy of Method for Quantitative Determination of Volatile Compounds in Alcohol Products

    CERN Document Server

    Charepitsa, S V; Zadreyko, Y V; Sytova, S N

    2016-01-01

    Results of the estimation of the precision for determination volatile compounds in alcohol-containing products by gas chromatography: acetaldehyde, methyl acetate, ethyl acetate, methanol, isopropyl alcohol, propyl alcohol, isobutyl alcohol, butyl alcohol, isoamyl alcohol are presented. To determine the accuracy, measurements were planned in accordance with ISO 5725 and held at the gas chromatograph Crystal-5000. Standard deviation of repeatability, intermediate precision and their limits are derived from obtained experimental data. The uncertainty of the measurements was calculated on the base of an "empirical" method. The obtained values of accuracy indicate that the developed method allows measurement uncertainty extended from 2 to 20% depending on the analyzed compound and measured concentration.

  12. Measurement of gas and volatile elements production rates in molten lead bismuth target

    CERN Document Server

    Andersson, M

    2004-01-01

    Production rates of gas and volatile elements produced following spallation raction of 1.4 GeV protons on a liquid LBE target have been measured. The experiment was performed at the ISOLDE facility at CERN. These data are of great interest for the developments of targets for accelerator driven systems such as MEGAPIE. Calculations were performed using the Monte Carlo code FLUKA coupled with an evolution code such as ORIHET3. Preliminary results show good comparison with MC data for Hg and for noble gases. For other elements such as I results indicate that only a fraction of the produced isotopes are released.

  13. Comparison of Three Methods for Extraction of Volatile Lipid Oxidation Products from Food Matrices for GC-MS Analysis

    DEFF Research Database (Denmark)

    Jacobsen, Charlotte; Yesiltas, B.; Berner, Lis

    headspace or automated dynamic headspace (TDU/DHS) extraction followed by GC-MS analysis will be compared. In all cases, concentrations of volatiles were quantified by calibration curves by addition of selected standards to oil, emulsion or milk. The results show that the linearity of calibration curves......GC based methods are often used for determination of volatile oxidation products such as pentanal and hexanal. Different extraction methods for extracting volatiles before GC analysis can be used, e.g static headspace, dynamic headspace and solid phase microextraction (SPME). Traditionally, dynamic...

  14. The lipoxygenase metabolic pathway in plants: potential for industrial production of natural green leaf volatiles

    Directory of Open Access Journals (Sweden)

    Gigot, C.

    2010-01-01

    Full Text Available Lipoxygenase enzymatic pathway is a widely studied mechanism in the plant kingdom. Combined actions of three enzymes: lipase, lipoxygenase (LOX and hydroperoxide lyase (HPL convert lipidic substrates such as C18:2 and C18:3 fatty acids into short chain volatiles. These reactions, triggered by cell membrane disruptions, produce compounds known as Green Leaf Volatiles (GLVs which are C6 or C9-aldehydes and alcohols. These GLVs are commonly used as flavors to confer a fresh green odor of vegetable to food products. Therefore, competitive biocatalytic productions have been developed to meet the high demand in these natural flavors. Vegetable oils, chosen for their lipidic acid profile, are converted by soybean LOX and plant HPL into natural GLVs. However this second step of the bioconversion presents low yield due to the HPL instability and the inhibition by its substrate. This paper will shortly describe the different enzymes involved in this bioconversion with regards to their chemical and enzymatic properties. Biotechnological techniques to enhance their production potentialities will be discussed along with their implication in a complete bioprocess, from the lipid substrate to the corresponding aldehydic or alcoholic flavors.

  15. SPME technique for analyzing headspace volatiles in fish miso, a Japanese fish meat-based fermented product.

    Science.gov (United States)

    Giri, Anupam; Osako, Kazufumi; Ohshima, Toshiaki

    2010-01-01

    The optimized conditions were evaluated for solid-phase microextraction (SPME) to investigate the headspace volatiles in fish miso, a Japanese fish meat-based fermented product. The influence on the efficiency for microextraction of such parameters as the sample size, isolation time and temperature, sensitivity and selectivity of several SPME fibers of different liquid phases as well as several extraction techniques was evaluated. Suitable reproducibility and sensitivity of SPME were achieved by combining carbowax/divenylbenzene of 65 µm thickness as the liquid phase of SPME, 3 g of fish miso, 40 °C of isolation temperature and 40 min of isolation time. The headspace volatiles of fish miso prepared from spotted mackerel were analyzed under the optimized conditions. Although several volatiles contributed to fish miso, certain volatile esters might have played the greatest role in imparting the sweet-fruity aroma to the product.

  16. New Approaches for the Production of Hydrocarbons from Hydrate Bearing Sediments

    Directory of Open Access Journals (Sweden)

    Ronny Giese

    2011-01-01

    Full Text Available The presence of natural gas hydrates at all active and passive continental margins has been proven. Their global occurrence as well as the fact that huge amounts of methane and other lighter hydrocarbons are stored in natural gas hydrates has led to the idea of using hydrate bearing sediments as an energy resource. However, natural gas hydrates remain stable as long as they are in mechanical, thermal and chemical equilibrium with their environment. Thus, for the production of gas from hydrate bearing sediments, at least one of these equilibrium states must be disturbed by depressurization, heating or addition of chemicals such as CO2. Depressurization, thermal or chemical stimulation may be used alone or in combination, but the idea of producing hydrocarbons from hydrate bearing sediments by CO2 injection suggests the potential of an almost emission free use of this unconventional natural gas resource. However, up to now there are still open questions regarding all three production principles. Within the framework of the German national research project SUGAR the thermal stimulation method by use of in situ combustion was developed and tested on a pilot plant scale and the CH4-CO2 swapping process in gas hydrates studied on a molecular level. Microscopy, confocal Raman spectroscopy and X-ray diffraction were used for in situ investigations of the CO2-hydrocarbon exchange process in gas hydrates and its driving forces. For the thermal stimulation a heat exchange reactor was designed and tested for the exothermal catalytic oxidation of methane. Furthermore, a large scale reservoir simulator was realized to synthesize hydrates in sediments under conditions similar to nature and to test the efficiency of the reactor. Thermocouples placed in the reservoir simulator with a total volume of 425 L collect data regarding the propagation of the heat front. In addition, CH4 sensors are placed in the water saturated sediment to detect the distribution of CH4

  17. Chemical diversity of microbial volatiles and their potential for plant growth and productivity

    Directory of Open Access Journals (Sweden)

    CHIDANANDA NAGAMANGALA KANCHISWAMY

    2015-03-01

    Full Text Available Microbial volatile organic compounds (MVOCs are produced by a wide array of microorganisms ranging from bacteria to fungi. A growing body of evidence indicates that MVOCs are ecofriendly and can be exploited as a cost-effective sustainable strategy for use in agricultural practice as agents that enhance plant growth, productivity and disease resistance. As naturally occurring chemicals, MVOCs have potential as possible alternatives to harmful pesticides, fungicides and bactericides as well as genetic modification. Recent studies performed under open field conditions demonstrate that efficiently adopting MVOCs may contribute to sustainable crop protection and production. We review here the chemical diversity of MVOCs and their potential physiological effects on crops and analyze potential and actual limitations for MVOC use as a sustainable strategy for improving productivity and reducing pesticide use.

  18. Correct quantitative determination of ethanol and volatile compounds in alcohol products

    CERN Document Server

    Charapitsa, Siarhei; Sytova, Svetlana; Yakuba, Yurii

    2014-01-01

    Determination of the volume content of ethanol in the alcohol products in practice is usually determined by pycnometry, electronic densimetry, or densimetry using a hydrostatic balance in accordance with Commission Regulation No 2870/2000. However, these methods determine directly only density of the tested liquid sample and does not take into account the effects of other volatile components such as aldehydes, esters and higher alcohols. So they are appropriate only for binary water-ethanol solutions in accordance with international table adopted by the International Legal Metrology Organization in its Recommendation No 22. Availability notable concentrations of the higher alcohols and ethers in different alcohol-based products, e. g. in whisky, cognac, brandy, wine as well as in waste alcohol and alcohol beverage production, leads to the significant contribution of these compounds in the value of the density of tested alcohol-containing sample. As a result, determination of the volume of ethanol content for ...

  19. Exposure to polycyclic aromatic hydrocarbons and volatile organic compounds among recently pregnant rural Guatemalan women cooking and heating with solid fuels.

    Science.gov (United States)

    Weinstein, John R; Asteria-Peñaloza, Renée; Diaz-Artiga, Anaité; Davila, Gilberto; Hammond, S Katharine; Ryde, Ian T; Meyer, Joel N; Benowitz, Neal; Thompson, Lisa M

    2017-06-01

    Household air pollution is a major contributor to death and disability worldwide. Over 95% of rural Guatemalan households use woodstoves for cooking or heating. Woodsmoke contains carcinogenic or fetotoxic polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs). Increased PAHs and VOCs have been shown to increase levels of oxidative stress. We examined PAH and VOC exposures among recently pregnant rural Guatemalan women exposed to woodsmoke and compared exposures to levels seen occupationally or among smokers. Urine was collected from 23 women who were 3 months post-partum three times over 72h: morning (fasting), after lunch, and following dinner or use of wood-fired traditional sauna baths (samples=68). Creatinine-adjusted urinary concentrations of metabolites of four PAHs and eight VOCs were analyzed by liquid chromatography-mass spectrometry. Creatinine-adjusted urinary biomarkers of oxidative stress, 8-isoprostane and 8-OHdG, were analyzed using enzyme-linked immunosorbent assays (ELISA). Long-term (pregnancy through 3 months prenatal) exposure to particulate matter and airborne PAHs were measured. Women using wood-fueled chimney stoves are exposed to high levels of particulate matter (median 48h PM2.5 105.7μg/m3; inter-quartile range (IQR): 77.6-130.4). Urinary PAH and VOC metabolites were significantly associated with woodsmoke exposures: 2-naphthol (median (IQR) in ng/mg creatinine: 295.9 (74.4-430.9) after sauna versus 23.9 (17.1-49.5) fasting; and acrolein: 571.7 (429.3-1040.7) after sauna versus 268.0 (178.3-398.6) fasting. Urinary PAH (total PAH: ρ=0.89, p0.85) or PAH and VOC biomarkers (ρ=-0.20 to 0.38, p>0.07). Urinary metabolite concentrations were significantly greater than those of heavy smokers (mean cigarettes/day=18) across all PAHs. In 15 (65%) women, maximum 1-hydroxypyrene concentrations exceeded the occupational exposure limit of coke-oven workers. The high concentrations of urinary PAH and VOC metabolites among

  20. Using supercritical fluids to refine hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Yarbro, Stephen Lee

    2014-11-25

    This is a method to reactively refine hydrocarbons, such as heavy oils with API gravities of less than 20.degree. and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure using a selected fluid at supercritical conditions. The reaction portion of the method delivers lighter weight, more volatile hydrocarbons to an attached contacting device that operates in mixed subcritical or supercritical modes. This separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques. This method produces valuable products with fewer processing steps, lower costs, increased worker safety due to less processing and handling, allow greater opportunity for new oil field development and subsequent positive economic impact, reduce related carbon dioxide, and wastes typical with conventional refineries.

  1. Partial Transformation Products as Indicators of Microbial Hydrocarbon Degradation in Soils

    Science.gov (United States)

    Stringfellow, W. T.

    2001-12-01

    Monitored natural decay (intrinsic bioremediation), a cost-effective method for remediating contaminated property, is widely applied to fuel contaminated sites. If an intrinsic bioremediation approach could be supported for the clean up of polynuclear aromatic hydrocarbon (PAH) contaminated properties, millions of dollars in clean-up costs could potential be saved, especially in transfers of industrial properties that will continue to be used for industrial purposes. Proving intrinsic biodegradation of polynuclear aromatic hydrocarbons (PAHs) is problematic. Slow PAH biodegradation rates in contaminated soils mean that oxygen mass transfer rates into the soil exceeds bacterial oxygen demand. Likewise carbon dioxide production during degradation is sufficiently slow that carbon dioxide will not accumulate in the soil gas to levels exceeding background, uncontaminated soils. Therefore, oxygen depletion and carbon dioxide accumulation, typical indicators of intrinsic remediation activity at fuel contaminated sites, are of little use in demonstrating intrinsic PAH remediation. Additionally, direct measurement of PAH loss over time is of limited use in the absence of extensive historical records, especially at sites that are still emitting PAHs as part of their operations. PAH loss rates may be in the order of 10% per year, whereas combined sampling and analytical error can be greater than 50%. It is our hypothesis that PAH degradation products, such as aromatic carboxylic acids and dihydrodiols, will be present in soils where biodegradation is occurring and absent in soils that are biologically inactive. We have developed methods for the extraction of PAH biodegradation products from soils and the analysis of these metabolites by both gas chromatography and high performance liquid chromatography. We have tested our hypothesis against soils undergoing both active and passive bioremediation. Our results indicate that PAH degradation products are detectable in many soils

  2. Techno-Economic Basis for Coproduct Manufacturing To Enable Hydrocarbon Fuel Production from Lignocellulosic Biomass

    Energy Technology Data Exchange (ETDEWEB)

    Biddy, Mary J.; Davis, Ryan; Humbird, David; Tao, Ling; Dowe, Nancy; Guarnieri, Michael T.; Linger, Jeffrey G.; Karp, Eric M.; Salvachua, Davinia; Vardon, Derek R.; Beckham, Gregg T.

    2016-06-06

    Biorefinery process development relies on techno-economic analysis (TEA) to identify primary cost drivers, prioritize research directions, and mitigate technical risk for scale-up through development of detailed process designs. Here, we conduct TEA of a model 2000 dry metric ton-per-day lignocellulosic biorefinery that employs a two-step pretreatment and enzymatic hydrolysis to produce biomass-derived sugars, followed by biological lipid production, lipid recovery, and catalytic hydrotreating to produce renewable diesel blendstock (RDB). On the basis of projected near-term technical feasibility of these steps, we predict that RDB could be produced at a minimum fuel selling price (MFSP) of USD $9.55/gasoline-gallon-equivalent (GGE), predicated on the need for improvements in the lipid productivity and yield beyond current benchmark performance. This cost is significant given the limitations in scale and high costs for aerobic cultivation of oleaginous microbes and subsequent lipid extraction/recovery. In light of this predicted cost, we developed an alternative pathway which demonstrates that RDB costs could be substantially reduced in the near term if upgradeable fractions of biomass, in this case hemicellulose-derived sugars, are diverted to coproducts of sufficient value and market size; here, we use succinic acid as an example coproduct. The coproduction model predicts an MFSP of USD $5.28/GGE when leaving conversion and yield parameters unchanged for the fuel production pathway, leading to a change in biorefinery RDB capacity from 24 to 15 MM GGE/year and 0.13 MM tons of succinic acid per year. Additional analysis demonstrates that beyond the near-term projections assumed in the models here, further reductions in the MFSP toward $2-3/GGE (which would be competitive with fossil-based hydrocarbon fuels) are possible with additional transformational improvements in the fuel and coproduct trains, especially in terms of carbon efficiency to both fuels and

  3. Physiological tolerance and stoichiometric potential of cyanobacteria for hydrocarbon fuel production.

    Science.gov (United States)

    Kämäräinen, Jari; Knoop, Henning; Stanford, Natalie J; Guerrero, Fernando; Akhtar, M Kalim; Aro, Eva-Mari; Steuer, Ralf; Jones, Patrik R

    2012-11-30

    Cyanobacteria are capable of directly converting sunlight, carbon dioxide and water into hydrocarbon fuel or precursors thereof. Many biological and non-biological factors will influence the ability of such a production system to become economically sustainable. We evaluated two factors in engineerable cyanobacteria which could potentially limit economic sustainability: (i) tolerance of the host to the intended end-product, and (ii) stoichiometric potential for production. Alcohols, when externally added, inhibited growth the most, followed by aldehydes and acids, whilst alkanes were the least inhibitory. The growth inhibition became progressively greater with increasing chain-length for alcohols, whilst the intermediate C6 alkane caused more inhibition than both C3 and C11 alkane. Synechocystis sp. PCC 6803 was more tolerant to some of the tested chemicals than Synechococcus elongatus PCC 7942, particularly ethanol and undecane. Stoichiometric evaluation of the potential yields suggested that there is no difference in the potential productivity of harvestable energy between any of the studied fuels, with the exception of ethylene, for which maximal stoichiometric yield is considerably lower. In summary, it was concluded that alkanes would constitute the best choice metabolic end-product for fuel production using cyanobacteria if high-yielding strains can be developed. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. In situ observation of self-assembled hydrocarbon Fischer-Tropsch products on a cobalt catalyst

    Science.gov (United States)

    Navarro, Violeta; van Spronsen, Matthijs A.; Frenken, Joost W. M.

    2016-10-01

    Fischer-Tropsch synthesis is a heterogeneous catalytic reaction that creates approximately 2% of the world's fuel. It involves the synthesis of linear hydrocarbon molecules from a gaseous mixture of carbon monoxide and hydrogen at high pressures (from a few to tens of bars) and high temperatures (200-350 °C). To gain further insight into the fundamental mechanisms of this industrial process, we have used a purpose-built scanning tunnelling microscope to monitor a cobalt model catalyst under reaction conditions. We show that, after 30 minutes of reaction, the terraces of the cobalt catalyst are covered by parallel arrays of stripes. We propose that the stripes are formed by the self-assembly of linear hydrocarbon product molecules. Surprisingly, the width of the stripes corresponds to molecules that are 14 or 15 carbon atoms long. We introduce a simple model that explains the accumulation of such long molecules by describing their monomer-by-monomer synthesis and explicitly accounting for their thermal desorption.

  5. Nonthermal plasma reactors for the production of light hydrocarbon olefins from heavy oil

    Directory of Open Access Journals (Sweden)

    G. Prieto

    2003-03-01

    Full Text Available During the last decade, nonthermal plasma technology was applied in many different fields, focusing attention on the destruction of harmful compounds in the air. This paper deals with nonthermal plasma reactors for the conversion of heavy oil into light hydrocarbon olefins, to be employed as gasoline components or to be added in small amounts for the catalytic reduction of nitrogen oxide compounds in the treatment of exhaust gas at power plants. For the process, the plate-plate nonthermal plasma reactor driven by AC high voltage was selected. The reactor was modeled as a function of parameter characteristics, using the methodology provided by the statistical experimental design. The parameters studied were gap distance between electrodes, carrier gas flow and applied power. Results indicate that the reactions occurring in the process of heavy oil conversion have an important selective behavior. The products obtained were C1-C4 hydrocarbons with ethylene as the main compound. Operating the parameters of the reactor within the established operative window of the system and close to the optimum conditions, efficiencies as high as 70 (mul/joule were obtained. These values validate the process as an in-situ method to produce light olefins for the treatment of nitrogen oxides in the exhaust gas from diesel engines.

  6. Bureau of hydrocarbons exploration-production (BEPH) - Monthly information bulletin. December 2006; Bureau exploration-production des hydrocarbures. Bulletin mensuel d'information. Decembre 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-12-15

    This newsletter takes stock of the recent highlights in the domain of hydrocarbons exploration and production in the French territory: mining domain (demands and allocations of research permits and concessions; list of demands under instruction), drilling activity (new drillings, advance of existing exploratory and extension-development drillings); production activity (interventions on wells, crude oil, crude gas, commercialized gas, natural gas-derived hydrocarbons, related products, production shares by company in the Paris and Aquitain basins); underground storage facilities (allocation and extension of concessions). (J.S.)

  7. Vinegar production from fruit concentrates: effect on volatile composition and antioxidant activity.

    Science.gov (United States)

    Coelho, Eduardo; Genisheva, Zlatina; Oliveira, José Maria; Teixeira, José António; Domingues, Lucília

    2017-11-01

    Vinegar stands as a highly appreciated fermented food product due to several functional properties and multiple applications. This work focuses on vinegar production from fruit wines derived from fruit concentrates, to attain a food product with nutritional added value. Four fruit vinegars (orange, mango, cherry and banana), were produced and characterized, with total acidities of 5.3 ± 0.3% for orange, 5.6 ± 0.2% for mango, 4.9 ± 0.4% for cherry and 5.4 ± 0.4% for banana. Acetification showed impact on aroma volatiles, mainly related to oxidative reactions. Minor volatiles associated with varietal aroma were identified, monoterpenic alcohols in orange vinegar, esters in banana vinegar, C13-norisoprenoids in cherry vinegar and lactones in mango vinegar, indicating fruit vinegars differentiated sensory quality. Total antioxidant activity analysis by FRAP, revealed fruit vinegars potential to preserve and deliver fruit functional properties. Antioxidant activity of fruit vinegars, expressed as equivalents of Fe2SO4, was of 11.0 ± 1.67 mmol L(-1) for orange, 4.8 ± 0.5 mmol L(-1) for mango, 18.6 ± 2.33 mmol L(-1) for cherry and 3.7 ± 0.3 mmol L(-1) for banana. Therefore, fruit vinegars presented antioxidant activity close to the reported for the corresponding fruit, and between 8 and 40 folds higher than the one found in commercial cider vinegar, demonstrating the high functional potential of these novel vinegar products.

  8. Utilization of Volatile Fatty Acids from Microalgae for the Production of High Added Value Compounds

    Directory of Open Access Journals (Sweden)

    Angelina Chalima

    2017-10-01

    Full Text Available Volatile Fatty Acids (VFA are small organic compounds that have attracted much attention lately, due to their use as a carbon source for microorganisms involved in the production of bioactive compounds, biodegradable materials and energy. Low cost production of VFA from different types of waste streams can occur via dark fermentation, offering a promising approach for the production of biofuels and biochemicals with simultaneous reduction of waste volume. VFA can be subsequently utilized in fermentation processes and efficiently transformed into bioactive compounds that can be used in the food and nutraceutical industry for the development of functional foods with scientifically sustained claims. Microalgae are oleaginous microorganisms that are able to grow in heterotrophic cultures supported by VFA as a carbon source and accumulate high amounts of valuable products, such as omega-3 fatty acids and exopolysaccharides. This article reviews the different types of waste streams in concert with their potential to produce VFA, the possible factors that affect the VFA production process and the utilization of the resulting VFA in microalgae fermentation processes. The biology of VFA utilization, the potential products and the downstream processes are discussed in detail.

  9. Volatile sulfur production by pig cecal bacteria in batch culture and screening inhibitors of sulfate reducing bacteria.

    Science.gov (United States)

    Arakawa, T; Ishikawa, Y; Ushida, K

    2000-08-01

    We studied the effects of specific inhibitors of methanogenesis (2-bromoethane sulfonate, BES) and sulfate reduction (sodium molybdate) on volatile sulfur production in batch cultures of pig cecal bacteria. The volatile sulfur concentration in headspace gas was determined by flame-photometric detector gas chromatography. BES stimulated production of hydrogen sulfide (H2S) and methanethiol, and sodium molybdate completely inhibited the production of these volatile sulfur compounds. The results indicated that dissimilate sulfate reduction is mainly responsible for volatile sulfur production in the hindgut. Therefore the extracts of herbs, food colors, and aroma chemicals were tested for their inhibitory effects on H2S production by a dissimilatory sulfate-reducing bacteria. Desulfovibrio desulfuricans DSM642. H2S was measured by the chromatography of the headspace gas, using a flame photometric detector. Of 306 herbal extracts tested, 69 extracts from 38 herbs inhibited H2S production at 1.0 mg/mL. Sisymbrium officinale (hedge mustard) was the most potent inhibitor. Six pigments inhibited H2S release. Erythrosine and rose bengal showed inhibitory effects at 0.01 mg/mL. Peppermint oil and 96 aroma chemicals were assayed for their effects on H2S release. Thirty-two aroma chemicals suppressed H2S production at 0.1 mg/mL, and camphene, 1-decanol, and 2-nonanone were effective at 0.01 mg/mL.

  10. Volatile organic compound production and consumption by microbial plankton communities on the NOAA WACS cruise

    Science.gov (United States)

    Giovannoni, S. J.; Halsey, K.; Thrash, J. C.; De Gouw, J. A.; Graus, M.

    2013-12-01

    Information about biological sources and sinks of volatile organic compounds (VOCs) in the ocean surface could result in a better understanding of the underlying causes of variation in air/sea VOC fluxes, and potentially could alter predictions about the impact of climate change on ocean surface ecology and air/sea interactions. The goal of this work was to measure rates of biological production, oxidation and assimilation of volatile organic compounds (VOCs) by microbial plankton communities along the WACS cruise transect from Boston to Bermuda in August 2013. Tangential flow filtration was used to concentrate microbial plankton communities for incubation in environmentally controlled dynamic stripping chambers under simulated ocean surface layer conditions. Gas streams exiting the chambers were monitored in real time with proton transfer reaction mass spectrometry (PTR-MS). In separate experiments aliquots of plankton suspensions were incubated with 14C-methanol, 14C-TMAO, and 14C-pyruvate, and the assimilation of 14C into biomass and the production of 14C-CO2 were measured. Results showed that the highly productive George's Bank plankton community has a high capacity for methanol and trimethylamine oxide (TMAO) oxidation. Biomass was estimated by counting cells. The rate of incorporation of methanol-carbon into biomass was only 21% of the rate of methanol oxidation to CO2. Similar results were observed for TMAO. These experiments also allowed estimates of kinetic constants for both compounds. The half-saturation constants (Ks) for methanol oxidation were similar in natural populations collected at George's Bank and the Sargasso Sea (12.8 and 9.9 μM, respectively). Interestingly, the Ks values for TMAO oxidation were an order of magnitude lower than for methanol in plankton communities sampled from both sites (0.5 and 0.3 μM, respectively). These results provide additional evidence that microbial plankton have a high capacity for oxidation of these low

  11. Optimization of light for growth, photosynthesis, and hydrocarbon production by the colonial microalga Botryococcus braunii BOT-22.

    Science.gov (United States)

    Sakamoto, Kohei; Baba, Masato; Suzuki, Iwane; Watanabe, Makoto M; Shiraiwa, Yoshihiro

    2012-04-01

    Optimization of the light conditions for biofuel production by the microalga Botryococcus braunii BOT-22 (race B) was performed using monochromatic red light. The lipid and sugar contents were approximately 40% and 20-30% of the cell dry weight, respectively, and about half of the lipids were liquid hydrocarbons. The half-saturation intensities for the production rate of lipids, hydrocarbons, and sugars were 63, 49, and 44μmolm(-2)s(-1), respectively. Fluorescence microscopic images of Nile Red-stained cells showed an increased number of intracellular neutral lipid granules due to increased light intensity. After 16days of incubation in the dark, lipid and sugar, but not hydrocarbon content decreased. Growth, metabolite production, and photosynthesis were saturated at 100, 200 and 1000μmolm(-2)s(-1), respectively. These results indicate that photosynthetically captured energy is not used efficiently for metabolite production; thus, improvements in metabolic regulation may increase hydrocarbon production. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. "Gold" Pressed Essential Oil: An Essay on the Volatile Fragment from Citrus Juice Industry By-Products Chemistry and Bioactivity.

    Science.gov (United States)

    Kapsaski-Kanelli, V N; Evergetis, E; Michaelakis, A; Papachristos, D P; Myrtsi, E D; Koulocheri, S D; Haroutounian, S A

    2017-01-01

    Present essay explores the potentials of Citrus juice industry's by-products as alternative bioactive natural products resources. Four crude Cold Pressed Essential Oils (CPEOs), derived from orange, lemon, grapefruit, and mandarin, were studied. All CPEOs were subjected to water distillation, in order to obtain the volatile fragment, which was further fractionated with respect to distillation period in two parts, concluding to eight samples. These samples along with the four original CPEOs were assessed in relation to their phytochemical content and their repellent and larvicidal properties against Asian Tiger Mosquito. The volatiles recovery rates ranged from 74% to 88% of the CPEO. Limonene presented a significant increase in all samples ranging from 8% to 52% of the respective CPEO's content and peaked in mandarin's 2nd volatile fragment which comprised 97% of the essential oil. The refinement process presented clear impacts on both bioassays: a significant increase in larvicidal potency was observed, annotated best by the improvement by 1100% and 1300% of the grapefruit volatile fractions; repellence testing provided only one significant result, the decrease of landings by 50% as a response to mandarin's second volatile fraction. The applied methodology thus may be considered for the improvement of Citrus juice industry's by-products chemistry and bioactivity.

  13. Emission and profile characteristic of volatile organic compounds emitted from coke production, iron smelt, heating station and power plant in Liaoning Province, China.

    Science.gov (United States)

    Shi, Jianwu; Deng, Hao; Bai, Zhipeng; Kong, Shaofei; Wang, Xiuyan; Hao, Jiming; Han, Xinyu; Ning, Ping

    2015-05-15

    107 kinds of C₂-C₁₂ volatile organic compound (VOC) mass concentrations and profiles for four types of coal-fired stationary sources in Liaoning Province were studied by a dilution sampling system and GC-MS analysis method, which are of significant importance with regard to VOC emissions in northeast of China. The results showed that there were some differences among these VOC source profiles. The total mass concentrations of analyzed 107 VOC species varied from 10,917 to 19,652 μg m(-3). Halogenated hydrocarbons exhibited higher mass percentages for the VOC source profiles of iron smelt (48.8%) and coke production plant (37.7%). Aromatic hydrocarbons were the most abundant in heating station plant (69.1%). Ketones, alcohols and acetates held 45.0% of total VOCs in thermal power plant. For non-methane hydrocarbons (NMHCs), which are demanded for photochemical assessment in the USA, toluene and n-hexane were the most abundant species in the iron smelt, coke production and thermal power plant, with the mass percentages of 64.8%, 52.7% and 38.6%, respectively. Trimethylbenzene, n-propylbenzene and o,m-ethyltoluene approximately accounted for 70.0% in heating station plant. NMHCs emitted from coke production, iron smelt, heating station and power plant listed above presented different chemical reactivities. The average OH loss rate of NMHCs from heating station, was 4 to 5.6 times higher than that of NMHCs from iron smelt, coke production and power plant, which implies that VOCs emitted from heating station in northeast of China should be controlled firstly to avoid photochemical ozone pollution and protect human health. There are significant variations in the ratios of benzene/toluene and m, p-xylene/ethylbenzene of these coal-fired source profiles. The representativeness of the coal-fired sources studied and the VOC samples collected should be more closely examined. The accuracy of VOC source profiles related to coal-fired processes is highly dependent on

  14. Site profiles of low-volatile chlorinated hydrocarbons - cause-oriented monitoring in aquatic media. Vol.2. Low-volatile chlorinated hydrocarbons in surface water, sediments, suspended matter and fish of the Elbe river and its tributaries; Standortprofile schwerfluechtiger chlorierter Kohlenwasserstoffe (SCKW) - ursachenorientiertes Monitoring in aquatischen Medien. Bd. 2. SCKW in Oberflaechenwasser, Sediment, Schwebstoffen und Fischen aus der Elbe und Nebenfluessen

    Energy Technology Data Exchange (ETDEWEB)

    Heinisch, E.; Kettrup, A.; Gebefuegi, I.; Martens, D.; Bergheim, W.; Wenzel, S.

    2001-07-01

    Evaluating the primary data from ARGE ELBE, LAU Halle/Saale and the Environmental Specimen Banking (Umweltprobenbank) as well from publications from the Czech Republic (CHMU) the concentrations of the following low volatile chlorinated hydrocarbons were established for surface water, sediment, breams and eels from the rivers Elbe, Schwarze Elster, Mulde and Saale partly from 1989 till 1999: DDT and its metabolites DDE and DDD, partly as 2,4'- and 4,4' isomers; HCH ({alpha}-, {beta}-, {gamma}- and {delta} isomers); chlorinated benzenes with 1-6 Cl atoms and octachlorostyrene. The data evaluated were drawn up into tables - comprehensive in a separate supplement, in short versions within the text - and consolidated into graphs. Aim of the paper was a cause-oriented monitoring. The by far most important emission sources, found from the distance and time profiles as well as from special assessments of the substance patterns, were chemical plants. (orig.) [German] Durch Auswertung von Primaerdaten der ARGE ELBE, des LAU Halle/Saale und der Umweltprobenbank sowie von Publikationen aus Tschechien (CHMU) wurden fuer Oberflaechenwasser, Sediment, Brassen/Bleien und Aale aus der Elbe, Schwarzen Elster, Mulde und Saale fuer die Jahre von z.T. 1989 bis 1999 die Konzentrationen der folgenden schwerfluechtigen Kohlenwasserstoffe (SCKW) ermittelt: DDT und seine Metabolite DDE und DDD, z.T. als 2,4'- und 4,4'-Isomere; HCH ({alpha}-, {beta}-, {gamma}- und {delta}-Isomere); chlorierte Benzole mit 1-6 Cl-Atomen und Octachlorstyrol. Die ausgewerteten Daten wurden zu Tabellen - ausfuehrlich in einem gesonderten Tabellenanhang und verkuerzt im Textteil - zusammengestellt sowie zu Grafiken verdichtet. Ziel der Arbeit war ein ursachenorientiertes Monitoring. Als mit Abstand wesentlichste Emissionsquellen konnten anhand von Streckenprofilen und Zeitrastern sowie durch spezielle Auswertungen der Stoffmusterverteilungen Chemibetriebe ermittelt werden. (orig.)

  15. Production of liquid hydrocarbons using nuclear energy; Erzeugung von fluessigen Kohlenwasserstoffen unter Einsatz von Kernenergie

    Energy Technology Data Exchange (ETDEWEB)

    Poeppe, N.; Tragsdorf, I.M. [Technische Hochschule Aachen (Germany). Lehrstuhl fuer Reaktorsicherheit und -technik; Kugeler, K. [Technische Hochschule Aachen (Germany). Lehrstuhl fuer Reaktorsicherheit und -technik]|[Forschungszentrum Juelich GmbH (Germany). Inst. fuer Sicherheitsforschung und Reaktortechnik; Kugeler, E.

    2006-10-15

    In the future, the global demand on liquid hydrocarbons especially for the traffic sector will still increase. To supply the world market with adequate volumes will necessitate the application of alternatively generated fuels in a few decades already. Besides conventional generation processes, where the necessary process heat comes from the combustion of part of the products, the use of nuclear heat is possible to cover the process energy demand. This heat is required in form of steam, electricity and high-temperature heat. Using these techniques the following processes can be attractive: steam flooding of oil deposits, the oil recovery from oil sands and oil shales, the methanol production from natural gas, the coal hydrogenation as well as the production of methanol from biomass. Normally, the volume of recoverable light hydrocarbons can be doubled by applying nuclear energy. The CO{sub 2} emissions during the production process can be avoided and the production costs can be decreased compared to current oil prices. The necessary conversion technologies are well-known and proven in industrial use, some of them for a long-time. The modular high-temperature reactor can be used as a nuclear heat source. This kind of heat source will be sized around 200 MW{sub th}, if a cylindrical core is used. Under these conditions even for a complete loss of the core cooling neither improper overheating of the fuel elements nor a core melt-down can occur. Therefore the retention of radioactive material in the reactor system is assured even for severe accidents. Using an annular core the power can be increased up to 400 MW{sub th} while the system maintains the mentioned safety properties. The nuclear heat is integrated into the process by steam generator, helium heated steam reformer for the steam reforming reaction and by helium-helium heat exchangers. The high-temperature heat exchangers are tested in permanent operation for helium temperatures of 950 C and for powers of 10 MW

  16. Secondary production of toxic nitropolycyclic aromatic hydrocarbon during the Asian dust event: approached by model simulation

    Science.gov (United States)

    Inomata, Y.; Kajino, M.; Sato, K.

    2016-12-01

    Nitrated polycyclic aromatic hydrocarbons (NPAHs) are one of toxic compounds in the atmospheric particles. NPAHs are emitted in the atmosphere through the combustion of fossil fuels such as coal and diesel. Furthermore, it is produced by heterogeneous reactions such as the surface on the mineral dust aerosols. 1-nitoropyrene (1-NP) is one of the most abundant NPAHs and considered as a probable carcinogen. It is found that the production of 1-NP occurred during the heavy Asian dust event in Beijing and Japan. In this study, we estimated production of 1-NP by heterogeneous reactions by using model simulations in Northeast Asia. The model was three dimensional chemical transport model, Regional Air Quality Model for POPs version. The model performance was investigated the comparison with the observations. We focused on heavy Asian dust event observed in Beijing on 18-20 March 2010. Several sensitivity calculations are conducted under the existence of Asian dust in order to investigate the effect of relative humidity and photolysis. On 18-20 March 2010, primary 1-NP concentrations are about 50 fg/m3. Under the existence of the Asian dust, secondary production of 1-NP is estimated to 7 times against the concentrations of primary emission. Horizontal distributions indicate that decrease of Pyr and increase of 1-NP is significant around Beijing in this Asian dust event. Secondary production of 1-NP was large in this area as well as the downwind region such as the East China Sea. It is found that secondary production of 1-NP is minor in dessert region because of lower concentrations of Pyrene (Pyr). Distribution of secondary produced 1-NP varied with concentrations of Pyr, transport of Asian dust. Secondary production of 1-NP in March 2010 was larger than the primary emission of 1-NP, whereas the secondary production was smaller than those of the primary emission in April and May, 2011.

  17. Product analysis during the thermo-oxidation of amorphous deuterated hydrocarbon films with NO2

    Directory of Open Access Journals (Sweden)

    D. Alegre

    2015-12-01

    Full Text Available The excellent thermo-oxidation properties of NO2 have been previously reported, pointing to fast carbon co-deposits removal even at temperatures as low as 200 °C. On the other hand, CO, CO2 and water have been found as the main gas products in oxidation by O2, but in NO2 they have not been confirmed. To make a more accurate assessment, the use of in-situ deposited deuterated hydrocarbon films—to be able to distinguish products from ambient, protonated ones—in a fully-baked chamber have been used in the present work, mainly aimed at detecting heavy (deuterated water among the reaction products. Other products from hydrogen isotopes could not be identified, but their production would be much lower than water. The ratio of the total deuterium to carbon products detected is lower by an order of magnitude than the D/C ratio of the film (0.04–0.07 to 0.4, probably associated to the difficulties of measuring water in a vacuum system, and the relatively large quantity of background water found. Furthermore, post-oxidation of CO to CO2 has been found for NO2 at any studied temperature, while for O2 a faster post-oxidation which only occurs at T > 275 °C was found. Finally, the implications of the water production in the use of thermo-oxidation in actual and future nuclear fusion devices are also addressed.

  18. Mid- Atlantic Gas Hydrate, Heat Flow, and Basin Analysis: Implications to Hydrocarbon Production in the Carolina Trough

    Science.gov (United States)

    Phrampus, B. J.

    2015-12-01

    The new Mid- and South Atlantic Planning Areas for oil and gas leasing is proposed to open in 2021. This region lacks in contemporary geologic and geophysical petroleum data and has no conventional wells drilled within the proposed leasing area. As such, addressing the hydrocarbon potential of this region is particularly difficult. Here, we use new and legacy multi-channel seismic data with heat flow observations, ocean temperature measurements, and new seismic interpretations of gas hydrate deposits to determine basin-wide heat flow along the Mid- Atlantic. These data reveal a conductive heat flow regime along the continental margin with a lack of fluid flow that is consistent with sea floor spreading rates and cooling oceanic crust. We then use these observations in combination with basal heat flow models and sedimentation records to determine the thermal history of a cross section of the Carolina Trough. These models reveal varying depth of potential hydrocarbon production that begin at ~ 2000 mbsf and extend down to depths greater than 7000 mbsf across the Carolina Trough. These potentially productive depths correspond to varying stratal ages, but all models contain the Late Jurassic, which is a potential analog to the U.S. Gulf Coast's Smackover Formation. Additionally, the timing of hydrocarbon generation reveal that Early through Middle Jurassic evaporite deposits and Late Jurassic tight limestones should have been in place before the Early Jurassic source rocks reached a depth of burial sufficiently deep for the production of hydrocarbons. These potential seals may trap significant quantities of hydrocarbons with in the Jurassic layers, resulting in significant hydrocarbon potential within the Carolina Trough.

  19. Valorization of Waste Lipids through Hydrothermal Catalytic Conversion to Liquid Hydrocarbon Fuels with in Situ Hydrogen Production

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dongwook; Vardon, Derek R.; Murali, Dheeptha; Sharma, Brajendra K.; Strathmann, Timothy J.

    2016-03-07

    We demonstrate hydrothermal (300 degrees C, 10 MPa) catalytic conversion of real waste lipids (e.g., waste vegetable oil, sewer trap grease) to liquid hydrocarbon fuels without net need for external chemical inputs (e.g., H2 gas, methanol). A supported bimetallic catalyst (Pt-Re/C; 5 wt % of each metal) previously shown to catalyze both aqueous phase reforming of glycerol (a triacylglyceride lipid hydrolysis coproduct) to H2 gas and conversion of oleic and stearic acid, model unsaturated and saturated fatty acids, to linear alkanes was applied to process real waste lipid feedstocks in water. For reactions conducted with an initially inert headspace gas (N2), waste vegetable oil (WVO) was fully converted into linear hydrocarbons (C15-C17) and other hydrolyzed byproducts within 4.5 h, and H2 gas production was observed. Addition of H2 to the initial reactor headspace accelerated conversion, but net H2 production was still observed, in agreement with results obtained for aqueous mixtures containing model fatty acids and glycerol. Conversion to liquid hydrocarbons with net H2 production was also observed for a range of other waste lipid feedstocks (animal fat residuals, sewer trap grease, dry distiller's grain oil, coffee oil residual). These findings demonstrate potential for valorization of waste lipids through conversion to hydrocarbons that are more compatible with current petroleum-based liquid fuels than the biodiesel and biogas products of conventional waste lipid processing technologies.

  20. Acidogenic fermentation of food waste for volatile fatty acid production with co-generation of biohydrogen.

    Science.gov (United States)

    Dahiya, Shikha; Sarkar, Omprakash; Swamy, Y V; Mohan, S Venkata

    2015-04-01

    Fermentation experiments were designed to elucidate the functional role of the redox microenvironment on volatile fatty acid (VFA, short chain carboxylic acid) production and co-generation of biohydrogen (H2). Higher VFA productivity was observed at pH 10 operation (6.3g/l) followed by pH 9, pH 6, pH 5, pH 7, pH 8 and pH 11 (3.5 g/l). High degree of acidification, good system buffering capacity along with co-generation of higher H2 production from food waste was also noticed at alkaline condition. Experiments illustrated the role of initial pH on carboxylic acids synthesis. Alkaline redox conditions assist solubilization of carbohydrates, protein and fats and also suppress the growth of methanogens. Among the carboxylic acids, acetate fraction was higher at alkaline condition than corresponding neutral or acidic operations. Integrated process of VFA production from waste with co-generation of H2 can be considered as a green and sustainable platform for value-addition. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Improving the hydrocarbon production via co-pyrolysis of bagasse with bio-plastic and dual-catalysts layout.

    Science.gov (United States)

    Zhang, Huiyan; Likun, Peter Keliona Wani; Xiao, Rui

    2017-11-08

    Catalytic fast pyrolysis (CFP) of bagasse and bio-plastic (chicken feather keratin) and their mixtures were conducted to produce aromatic hydrocarbons over a HZSM-5, USY, and dual-catalysts layout. The effects of temperature, co-feeding ratios, feed-to-catalyst ratios and dual catalysts on hydrocarbon yields and selectivities were investigated. The results show a general improvement in the aromatic hydrocarbons yields in all cases compared to non-catalytic and pure biomass pyrolysis. The aromatic hydrocarbons increased by 10 fold with the increase of temperature from 400°C to 700°C. The aromatic yields increased 1.5 times at co-feeding, 2.0 greater at feed/HZSM-5 ratio of 1:6, 1.2 times at feed/USY ratio of 1:16, and 2.66 times at USY/HZSM-5 scenario. The selectivities towards benzene increased, at higher co-feeding ratios, while that of toluene shows an opposite trend. Xylenes selectivities were less sensitive to the changes of co-feeding ratios. In contrast, the USY catalyst only produced little amount of toluene and xylenes. The dual catalyst design (USY/HZSM-5) resulted in the highest aromatic yields, than other catalyst design scenarios. The pyrolysis temperature is a significant parameter for hydrocarbon production. Co-feeding bagasse and bio-plastic enhanced biomass conversion to aromatic compounds. For any type of zeolite catalyst, there was an optimum feed-to-catalyst ratio that generated maximum hydrocarbons. Dual catalyst layout shows a new opportunity for efficient conversion of biomass materials into hydrocarbons. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Suitability of the hydrocarbon-hydroxylating molybdenum-enzyme ethylbenzene dehydrogenase for industrial chiral alcohol production.

    Science.gov (United States)

    Tataruch, M; Heider, J; Bryjak, J; Nowak, P; Knack, D; Czerniak, A; Liesiene, J; Szaleniec, M

    2014-12-20

    The molybdenum/iron-sulfur/heme protein ethylbenzene dehydrogenase (EbDH) was successfully applied to catalyze enantiospecific hydroxylation of alkylaromatic and alkylheterocyclic compounds. The optimization of the synthetic procedure involves use of the enzyme in a crude purification state that saves significant preparation effort and is more stable than purified EbDH without exhibiting unwanted side reactions. Moreover, immobilization of the enzyme on a crystalline cellulose support and changes in reaction conditions were introduced in order to increase the amounts of product formed (anaerobic atmosphere, electrochemical electron acceptor recycling or utilization of ferricyanide as alternative electron acceptor in high concentrations). We report here on an extension of effective enzyme activity from 4h to more than 10 days and final product yields of up to 0.4-0.5g/l, which represent a decent starting point for further optimization. Therefore, we expect that the hydrocarbon-hydroxylation capabilities of EbDH may be developed into a new process of industrial production of chiral alcohols. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Production of aromatic hydrocarbons by catalytic pyrolysis of microalgae with zeolites: catalyst screening in a pyroprobe.

    Science.gov (United States)

    Du, Zhenyi; Ma, Xiaochen; Li, Yun; Chen, Paul; Liu, Yuhuan; Lin, Xiangyang; Lei, Hanwu; Ruan, Roger

    2013-07-01

    Catalytic pyrolysis of microalgae and egg whites was investigated to evaluate the performance of different zeolites for the production of aromatic hydrocarbons. Three zeolites with different structures (H-Y, H-Beta and H-ZSM5) were used to study the effect of catalyst type on the aromatic yield. All three catalysts significantly increased the aromatic yields from pyrolysis of microalgae and egg whites compared with non-catalytic runs, and H-ZSM5 was most effective with a yield of 18.13%. Three H-ZSM5 with silica-to-alumina ratios of 30, 80 and 280 were used to study the effect of Si/Al ratio on the aromatic yield. The maximum yield was achieved at the Si/Al ratio of 80, which provides moderate acidity to achieve high aromatic production and reduce coke formation simultaneously. Aromatic production increased with the incorporation of copper or gallium to HZSM-5. However, other studied metals either had no significant influence or led to a lower aromatic yield. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Simultaneous determination of volatile and non-volatile nitrosamines in processed meat products by liquid chromatography tandem mass spectrometry using atmospheric pressure chemical ionisation and electrospray ionisation.

    Science.gov (United States)

    Herrmann, S S; Duedahl-Olesen, L; Granby, K

    2014-02-21

    A sensitive, selective and generic method has been developed for the simultaneous determination of the contents (μgkg(-1) range) of both volatile nitrosamines (VNA) and non-volatile nitrosamines (NVNA) in processed meat products. The extraction procedure only requires basic laboratory equipment and a small volume of organic solvent. Separation and quantification were performed by the developed LC-(APCI/ESI)MS/MS method. The method was validated using spiked samples of three different processed meat products. Satisfactory recoveries (50-130%) and precisions (2-23%) were obtained for eight VNA and six NVNAs with LODs generally between 0.2 and 1μgkg(-1), though for a few analyte/matrix combinations higher LODs were obtained (3 to 18μgkg(-1)). The validation results show that results obtained for one meat product is not always valid for other meat products. We were not able to obtain satisfactory results for N-nitrosohydroxyproline (NHPRO), N-nitrosodibenzylamine (NDBzA) and N-nitrosodiphenylamine (NDPhA). Application of the APCI interface improved the sensitivity of the method, because of less matrix interference, and gave the method a wider scope, as some NAs were ionisable only by APCI. However, it was only possible to ionize N-nitroso-thiazolidine-4-carboxylic acid (NTCA) and N-nitroso-2-methyl-thiazolidine-4-carboxylic acid (NMTCA) by ESI. The validated method was applied for the analysis of processed meat products and contents of N-nitrosodimethylamine (NDMA), N-nitrosopyrrolidine (NPYR), N-nitrosomethylaniline (NMA), N-nitrosoproline (NPRO), NTCA, and NMTCA were found in one or several nitrite cured meat products, whereas none were detected in non-nitrite cured bacon. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. IVO, a device for In situ Volatilization and On-line detection of products from heavy ion reactions

    CERN Document Server

    Duellmann, C E; Eichler, R; Gäggeler, H W; Jost, D T; Piguet, D; Türler, A

    2002-01-01

    A new gaschromatographic separation system to rapidly isolate heavy ion reaction products in the form of highly volatile species is described. Reaction products recoiling from the target are stopped in a gas volume and converted in situ to volatile species, which are swept by the carrier gas to a chromatography column. Species that are volatile under the given conditions pass through the column. In a cluster chamber, which is directly attached to the exit of the column, the isolated volatile species are chemically adsorbed to the surface of aerosol particles and transported to an on-line detection system. The whole set-up was tested using short-lived osmium (Os) and mercury (Hg) nuclides produced in heavy ion reactions to model future chemical studies with hassium (Hs, Z=108) and element 112. By varying the temperature of the isothermal section of the chromatography column between room temperature and -80 deg. C, yield measurements of given species can be conducted, yielding information about the volatility o...

  6. Research, development, and demonstration of algal production raceway (APR) systems for the production of hydrocarbon resources

    Energy Technology Data Exchange (ETDEWEB)

    Laws, E.A.

    1984-02-01

    A fractional factorial experimental design was used to determine the maximum production and photosynthetic efficiency that could be achieved in shallow algal mass culture systems (SAMCS) of the marine diatom Phaeodactylum tricornutum. Dilution rate and CO/sub 2/ supply were found to be the most important system parameters. Maximum production was found to be about 25 g dry wt m/sup -2/d/sup -1/. This production corresponded to a photosynthetic efficiency of 5.6%. These figures are 50 to 100% better than the production rates achieved in earlier P. tricornutum cultures using conventional culture techniques. The results are consistent with a theoretical model of the impact of the flashing light effect on algal mass culture production. This model predicts that at the typical irradiances in Hawaii, full utilization of the flashing light effect should enhance production by 70% to over 200%. It was concluded that the use of foil arrays in the experimental flume creates systematic vertical mixing on a time scale suitable for utilizing the flashing light effect. Production of P. tricornutum culture is probably limited by temperature. P. tricornutum cannot survive at temperatures in excess of 25/sup 0/C in outdoor mass cultures. Growth of mesophilic species in the temperature range 30 to 35/sup 0/C may well result in even higher production than that achieved with P. tricornutum.

  7. Energy, volatile production, and climatic effects of the Chicxulub Cretaceous/Tertiary impact

    Science.gov (United States)

    Pope, K. O.; Baines, K. H.; Ocampo, A. C.; Ivanov, B. A.

    1997-01-01

    A comprehensive analysis of volatiles in the Chicxulub impact strongly supports the hypothesis that impact-generated sulfate aerosols caused over a decade of global cooling, acid rain, and disruption of ocean circulation, which contributed to the mass extinction at the Cretaceous/Tertiary (K/T) boundary. The crater size, meteoritic content of the K/T boundary clay, and impact models indicate that the Chicxulub crater was formed by a short period comet or an asteroid impact that released 0.7-3.4 x 10(31) ergs of energy. Impact models and experiments combined with estimates of volatiles in the projectile and target rocks predict that over 200 gigatons (Gt) each of SO2 and water vapor, and over 500 Gt of CO2, were globally distributed in the stratosphere by the impact. Additional volatiles may have been produced on a global or regional scale that formed sulfate aerosols rapidly in cooler parts of the vapor plume, causing an early, intense pulse of sulfuric acid rain. Estimates of the conversion rate of stratospheric SO2 and water vapor to sulfate aerosol, based on volcanic production of sulfate aerosols, coupled with calculations of diffusion, coagulation, and sedimentation, demonstrate that the 200 Gt stratospheric SO2 and water vapor reservoir would produce sulfate aerosols for 12 years. These sulfate aerosols caused a second pulse of acid rain that was global. Radiative transfer modeling of the aerosol clouds demonstrates (1) that if the initial rapid pulse of sulfate aerosols was global, photosynthesis may have been shut down for 6 months and (2) that for the second prolonged aerosol cloud, solar transmission dropped 80% by the end of first year and remained 50% below normal for 9 years. As a result, global average surface temperatures probably dropped between 5 degrees and 31 degrees K, suggesting that global near-freezing conditions may have been reached. Impact-generated CO2 caused less than 1 degree K greenhouse warming and therefore was insignificant compare

  8. Efficacy of essence oil supplementation to feeds on volatile fatty acid production

    Directory of Open Access Journals (Sweden)

    Ahmet Tekeli

    2015-11-01

    Full Text Available Objective. Determine the effect of some plant extract supplementation to Total Mixed Ration (TMR, concentrate and hay on volatile fatty acid (VFA production at 8 and 24 hours (h using in vitro gas production technique in cattle. Material and methods. Three fistulated Holstein dairy cows were used for rumen fluid collection for application of in vitro gas production technique. Four essence oils (T. vulgaris, O. vulgare, S. aromaticum, Z. officinale were used as plant extracts. Results. Essence oil supplementations to the examined feed groups had significant effect only on C2/C3 VFA level at 8 h in all feed groups (p<0.05. C2/C3 VFA level at 8 h significantly increased in the groups with Oregano 25 ppm supplementation for TMR and concentrate and in the groups with Thymol 25 ppm supplementation for hay. C3 VFA level at 8 h significantly increased in the group that received Syzygium 200 ppm supplementation for hay. Different plant extracts supplemented to TMR, concentrate and hay significantly affected C2, C3, IC4, IC5, C5 and C2/C3 VFA levels at 24 h (p<0.05. Conclusions. The findings of the study indicate that moderate doses of plant extracts result in increased VFA levels in ruminants while higher doses demonstrate the opposite effect.

  9. Fermentation of wet-exploded corn stover for the production of volatile fatty acids.

    Science.gov (United States)

    Murali, Nanditha; Fernandez, Sebastian; Ahring, Birgitte Kiaer

    2017-03-01

    Volatile fatty acids (VFA) have been used as platform molecules for production of biofuels and bioproducts. In the current study, we examine the VFA production from wet-exploded corn stover through anaerobic fermentation using rumen bacteria. The total VFA yield (acetic acid equivalents) was found to increase from 22.8g/L at 2.5% total solids (TS) to 40.8g/L at 5% TS. It was found that the acetic acid concentration increased from 10g/L to 22g/L at 2.5% and 5% TS, respectively. An increased propionic acid production was seen between day 10 and 20 at 5% TS. Valeric acid (4g/L) was produced at 5% TS and not at 2.5% TS. Composition analysis showed that 50% of the carbohydrates were converted to VFA at 5% TS and 33% at 2.5% TS. Our results show that rumen fermentation of lignocellulosic biomass after wet explosion can produce high concentrations of VFA without addition of external enzymes of importance for the process economics of lignocellulosic biorefineries. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Herbivory induces systemic production of plant volatiles that attract predators of the herbivore: extraction of endogenous elicitor.

    NARCIS (Netherlands)

    Dicke, M.; Baarlen, van P.; Wessels, R.; Dijkman, H.

    1993-01-01

    It was previously shown that in response to infestation by spider mites (Tetranychus urticae), lima bean plants produce a volatile herbivoreinduced synomone that attracts phytoseiid mites (Phytoseiulus persimilis) that are predators of the spider mites. The production of predator-attracting

  11. Volatile organic compounds at oil and natural gas production well pads in Colorado and Texas using passive samplers

    Science.gov (United States)

    A pilot study was conducted in application of the U.S. Environmental Protection Agency (EPA) Methods 325A/B variant for monitoring volatile organic compounds (VOCs) near two oil and natural gas (ONG) production well pads in the Texas Barnett Shale formation and Colorado Denver&nd...

  12. Compounds and methods for the production of long chain hydrocarbons from biological sources

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John Cameron; Silks, Louis A; Sutton, Andrew D; Wu, Ruilian; Schlaf, Marcel; Waldie, Fraser; West, Ryan; Collias, Dimitris Ioannis

    2016-08-23

    The present invention is directed to the preparation of oxygenated, unsaturated hydrocarbon compounds, such as derivatives of furfural or hydroxymethyl furfural produced by aldol condensation with a ketone or a ketoester, as well as methods of deoxidatively reducing those compounds with hydrogen under acidic conditions to provide saturated hydrocarbons useful as fuels.

  13. An example of synergy between hydrocarbon and geothermal energy production in the Netherlands

    NARCIS (Netherlands)

    Peters, E.; Gessel, S.F. van; Jedari Eyvazi, F.

    2014-01-01

    After the successful development of a geothermal site in 2007 in the Netherlands, interest in geothermal development has increased. The large amount of data gathered for the hydrocarbon industry shows good potential in the north of the Netherlands often in the same areas in which hydrocarbon

  14. A Techno-Economic Analysis of Emission Controls on Hydrocarbon Biofuel Production

    Energy Technology Data Exchange (ETDEWEB)

    Bhatt, Arpit; Zhang, Yimin; Davis, Ryan; Eberle, Annika; Heath, Garvin

    2016-06-23

    Biofuels have the potential to reduce our dependency on petroleum-derived transportation fuels and decrease greenhouse gas (GHG) emissions. Although the overall GHG emissions from biofuels are expected to be lower when compared to those of petroleum fuels, the process of converting biomass feedstocks into biofuels emits various air pollutants, which may be subject to federal air quality regulation or emission limits. While prior research has evaluated the technical and economic feasibility of biofuel technologies, gaps still exist in understanding the regulatory issues associated with the biorefineries and their economic implications on biofuel production costs (referred to as minimum fuel selling price (MFSP) in this study). The aim of our research is to evaluate the economic impact of implementing emission reduction technologies at biorefineries and estimate the cost effectiveness of two primary control technologies that may be required for air permitting purposes. We analyze a lignocellulosic sugars-to-hydrocarbon biofuel production pathway developed by the National Renewable Energy Laboratory (NREL) and implement air emission controls in Aspen Plus to evaluate how they affect the MFSP. Results from this analysis can help inform decisions about biorefinery siting and sizing, as well as mitigate the risks associated with air permitting.

  15. Comparison of Three Methods for Extraction of Volatile Lipid Oxidation Products from Food Matrices for GC–MS Analysis

    DEFF Research Database (Denmark)

    Thomsen, Birgitte Raagaard; Yesiltas, Betül; Sørensen, Ann-Dorit Moltke

    2016-01-01

    The aim of this study was to compare three different collection methods; purge and trap, solid phase micro extraction and automated dynamic headspace/thermal desorption, all followed by GC–MS analysis used for the measurements of concentrations of volatile oxidation products in three different food...... micro extraction. Furthermore, we observed that purge and trap, and automated dynamic headspace/thermal desorption were excellent for extraction of volatile compounds in all three matrices. However, automated dynamic headspace/thermal desorption calibration curves did provide an overestimation for oil...

  16. Information bulletin of the bureau of hydrocarbons exploration-production (BEPH) - March 2008; Bulletin d'information du BEPH. Mars 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This newsletter takes stock of the recent highlights in the domain of hydrocarbons exploration and production in the French territory: mining domain (demands, allocations and extension of research permits and concessions; list of demands under instruction), drilling activity (new drillings, advance of existing exploratory and extension-development drillings); production activity (interventions on wells, crude oil, crude gas, commercialized gas, natural gas-derived hydrocarbons, related products, production shares by company in the Paris and Aquitain basins). (J.S.)

  17. Anaerobic fermentation of organic solid wastes: volatile fatty acid production and separation.

    Science.gov (United States)

    Yesil, H; Tugtas, A E; Bayrakdar, A; Calli, B

    2014-01-01

    Anaerobic fermentation of organic municipal solid waste was investigated using a leach-bed reactor (LBR) to assess the volatile fatty acid (VFA) production efficiency. The leachate recycle rate in the LBR affected the VFA composition of the leachate. A six-fold increase in the recycle rate resulted in an increase of the acetic acid fraction of leachate from 24.7 to 43.0%. The separation of VFAs via leachate replacement resulted in higher total VFA production. VFA separation from synthetic VFA mix and leachate of a fermented organic waste was assessed via a counter-current flow polytetrafluoroethylene (PTFE) membrane contactor. Acetic and propionic acid permeation fluxes of 13.12 and 14.21 g/m(2).h were obtained at low feed pH values when a synthetic VFA mix was used as a feed solution. The highest selectivity was obtained for caproic acid compared to that of other VFAs when synthetic VFA mix or leachate was used as a feed solution. High pH values and the presence of suspended solids in the leachate adversely affected the permeation rate.

  18. Effects of stress hormones on the production of volatile sulfur compounds by periodontopathogenic bacteria

    Directory of Open Access Journals (Sweden)

    Caroline Morini Calil

    2014-06-01

    Full Text Available Little is known about the effects of stress hormones on the etiologic agents of halitosis. Thus, the aim of this study was to evaluate in vitro the effects of adrenaline (ADR, noradrenaline (NA and cortisol (CORT on bacteria that produce volatile sulfur compounds (VSC, the major gases responsible for bad breath. Cultures of Fusobacterium nucleatum (Fn, Porphyromonas endodontalis (Pe, Prevotella intermedia (Pi and Porphyromonas gingivalis (Pg were exposed to 50 µM ADR, NA and CORT or equivalent volumes of sterile water as controls for 12 and 24 h. Growth was evaluated based on absorbance at 660 nm. Portable gas chromatography was used to measure VSC concentrations. Kruskal-Wallis and the Dunn post-hoc test were used to compare the groups. For Fn, ADR, NA and CORT significantly reduced bacterial growth after 12 h and 24 h (p 0.05. In the Pi cultures, ADR, NA and CORT increased H2S (p < 0.05. Catecholamines and cortisol can interfere with growth and H2S production of sub-gingival species in vitro. This process appears to be complex and supports the association between stress and the production of VSC.

  19. Volatile Profile of Cashew Apple Juice Fibers from Different Production Steps

    Directory of Open Access Journals (Sweden)

    Ana Carolina de Oliveira Nobre

    2015-05-01

    Full Text Available This study aimed to determine the volatile profile of cashew apple fibers to verify which compounds are still present after successive washings and thus might be responsible for the undesirable remaining cashew-like aroma present in this co-product, which is used to formulate food products like vegetarian burgers and cereal bars. Fibers were obtained from cashew apple juice processing and washed five times in an expeller press. Compounds were analyzed by the headspace solid-phase micro extraction technique (HS-SPME and gas chromatography-mass spectrometry (GC-MS, using a DB-5 column. Sensory analysis was also performed to compare the intensity of the cashew-like aroma of the fibers with the original juice. Altogether, 80 compounds were detected, being esters and terpenes the major chemical classes. Among the identified substances, 14 were classified as odoriferous in the literature, constituting the matrix used in the Principal Component Analysis (PCA. Odoriferous esters were substantially reduced, but many compounds were extracted by the strength used in the expeller press and remained until the last wash. Among them are the odoriferous compounds ethyl octanoate, γ-dodecalactone, (E-2-decenal, copaene, and caryophyllene that may contribute for the mild but still perceptible cashew apple aroma in the fibers that have been pressed and washed five times. Development of a deodorization process should include reduction of pressing force and stop at the second wash, to save water and energy, thus reducing operational costs and contributing to process sustainability.

  20. Influence of commercial (Fluka) naphthenic acids on acid volatile sulfide (AVS) production and divalent metal precipitation.

    Science.gov (United States)

    McQueen, Andrew D; Kinley, Ciera M; Rodgers, John H; Friesen, Vanessa; Bergsveinson, Jordyn; Haakensen, Monique C

    2016-12-01

    Energy-derived waters containing naphthenic acids (NAs) are complex mixtures often comprising a suite of potentially problematic constituents (e.g. organics, metals, and metalloids) that need treatment prior to beneficial use, including release to receiving aquatic systems. It has previously been suggested that NAs can have biostatic or biocidal properties that could inhibit microbially driven processes (e.g. dissimilatory sulfate reduction) used to transfer or transform metals in passive treatment systems (i.e. constructed wetlands). The overall objective of this study was to measure the effects of a commercially available (Fluka) NA on sulfate-reducing bacteria (SRB), production of sulfides (as acid-volatile sulfides [AVS]), and precipitation of divalent metals (i.e. Cu, Ni, Zn). These endpoints were assessed following 21-d aqueous exposures of NAs using bench-scale reactors. After 21-days, AVS molar concentrations were not statistically different (pprecipitation were not vulnerable to NAs, indicating passive treatment systems utilizing sulfide production (AVS) could be used to treat metals occurring in NAs affected waters. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Hydrogen production by reforming of liquid hydrocarbons in a membrane reactor for portable power generation-Experimental studies

    Science.gov (United States)

    Damle, Ashok S.

    One of the most promising technologies for lightweight, compact, portable power generation is proton exchange membrane (PEM) fuel cells. PEM fuel cells, however, require a source of pure hydrogen. Steam reforming of hydrocarbons in an integrated membrane reactor has potential to provide pure hydrogen in a compact system. Continuous separation of product hydrogen from the reforming gas mixture is expected to increase the yield of hydrogen significantly as predicted by model simulations. In the laboratory-scale experimental studies reported here steam reforming of liquid hydrocarbon fuels, butane, methanol and Clearlite ® was conducted to produce pure hydrogen in a single step membrane reformer using commercially available Pd-Ag foil membranes and reforming/WGS catalysts. All of the experimental results demonstrated increase in hydrocarbon conversion due to hydrogen separation when compared with the hydrocarbon conversion without any hydrogen separation. Increase in hydrogen recovery was also shown to result in corresponding increase in hydrocarbon conversion in these studies demonstrating the basic concept. The experiments also provided insight into the effect of individual variables such as pressure, temperature, gas space velocity, and steam to carbon ratio. Steam reforming of butane was found to be limited by reaction kinetics for the experimental conditions used: catalysts used, average gas space velocity, and the reactor characteristics of surface area to volume ratio. Steam reforming of methanol in the presence of only WGS catalyst on the other hand indicated that the membrane reactor performance was limited by membrane permeation, especially at lower temperatures and lower feed pressures due to slower reconstitution of CO and H 2 into methane thus maintaining high hydrogen partial pressures in the reacting gas mixture. The limited amount of data collected with steam reforming of Clearlite ® indicated very good match between theoretical predictions and

  2. Herbivory by a Phloem-feeding insect inhibits floral volatile production.

    Science.gov (United States)

    Pareja, Martin; Qvarfordt, Erika; Webster, Ben; Mayon, Patrick; Pickett, John; Birkett, Michael; Glinwood, Robert

    2012-01-01

    There is extensive knowledge on the effects of insect herbivory on volatile emission from vegetative tissue, but little is known about its impact on floral volatiles. We show that herbivory by phloem-feeding aphids inhibits floral volatile emission in white mustard Sinapis alba measured by gas chromatographic analysis of headspace volatiles. The effect of the Brassica specialist aphid Lipaphis erysimi was stronger than the generalist aphid Myzus persicae and feeding by chewing larvae of the moth Plutella xylostella caused no reduction in floral volatile emission. Field observations showed no effect of L. erysimi-mediated floral volatile emission on the total number of flower visits by pollinators. Olfactory bioassays suggested that although two aphid natural enemies could detect aphid inhibition of floral volatiles, their olfactory orientation to infested plants was not disrupted. This is the first demonstration that phloem-feeding herbivory can affect floral volatile emission, and that the outcome of interaction between herbivory and floral chemistry may differ depending on the herbivore's feeding mode and degree of specialisation. The findings provide new insights into interactions between insect herbivores and plant chemistry.

  3. Herbivory by a Phloem-feeding insect inhibits floral volatile production.

    Directory of Open Access Journals (Sweden)

    Martin Pareja

    Full Text Available There is extensive knowledge on the effects of insect herbivory on volatile emission from vegetative tissue, but little is known about its impact on floral volatiles. We show that herbivory by phloem-feeding aphids inhibits floral volatile emission in white mustard Sinapis alba measured by gas chromatographic analysis of headspace volatiles. The effect of the Brassica specialist aphid Lipaphis erysimi was stronger than the generalist aphid Myzus persicae and feeding by chewing larvae of the moth Plutella xylostella caused no reduction in floral volatile emission. Field observations showed no effect of L. erysimi-mediated floral volatile emission on the total number of flower visits by pollinators. Olfactory bioassays suggested that although two aphid natural enemies could detect aphid inhibition of floral volatiles, their olfactory orientation to infested plants was not disrupted. This is the first demonstration that phloem-feeding herbivory can affect floral volatile emission, and that the outcome of interaction between herbivory and floral chemistry may differ depending on the herbivore's feeding mode and degree of specialisation. The findings provide new insights into interactions between insect herbivores and plant chemistry.

  4. Effects of exchange rate volatility on export volume and prices of forest products

    Science.gov (United States)

    Sijia Zhang; Joseph Buongiorno

    2010-01-01

    The relative value of currencies varies considerably over time. These fluctuations bring uncertainty to international traders. As a result, the volatility in exchange rate movements may influence the volume and the price of traded commodities. The volatility of exchange rates was measured by the variance of residuals in a GARCH(1,1) model of the exchange rate. We...

  5. Biosurfactant production by hydrocarbon-degrading Brevibacterium and Vibrio isolates from the sea pen Pteroeides spinosum (Ellis, 1764).

    Science.gov (United States)

    Graziano, Marco; Rizzo, Carmen; Michaud, Luigi; Porporato, Erika Maria Diletta; De Domenico, Emilio; Spanò, Nunziacarla; Lo Giudice, Angelina

    2016-09-01

    Among filter-feeders, pennatulids are the most complex and polymorphic members of the cnidarian class Anthozoa. They display a wide distribution throughout all the oceans, constituting a significant component of the sessile megafauna from intertidal to abyssal depths. In this study, a total of 118 bacterial isolates from enrichment cultures, carried out with homogenates of the sea pen Pteroeides spinosum (Ellis, 1764), were screened for hydrocarbon utilization by using the 2,6-dichlorophenol indophenol assay. Among them, 83 hydrocarbon-oxidizing isolates were analyzed for biosurfactant production by standard screening tests (i.e., emulsifying activity, E24 detection, surface tension measurement, microplate assay). The 16S rRNA gene sequencing revealed the affiliation of the most promising isolates to the genera Brevibacterium and Vibrio. Biosurfactant production resulted strongly affected by salinity and temperature conditions, and occurred in the presence of diesel oil and/or crude oil, whereas no production was observed when isolates were grown on tetradecane. The strains resulted able to create stable emulsions, thus suggesting the production of biosurfactants. Further analyses revealed a glycolipidic nature of the biosurfactant extracted from Vibrio sp. PBN295, a genus that has been only recently reported as biosurfactant producer. Results suggest that pennatulids could represent a novel source for the isolation of hydrocarbon-oxidizing bacteria with potential in biosurfactant production. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Probing skin physiology through the volatile footprint: Discriminating volatile emissions before and after acute barrier disruption.

    Science.gov (United States)

    Duffy, Emer; Jacobs, Matthew R; Kirby, Brian; Morrin, Aoife

    2017-10-01

    Volatile organic compounds emitted by human skin were sampled before and after acute barrier disruption of the volar forearm to investigate the significance of this approach to skin physiology research. A small wearable housing integrating a solid-phase micro-extraction fibre permitting rapid enclosed headspace sampling of human skin volatiles is presented, enabling non-invasive sample collection in 15 minutes, in a comfortable wearable format. Gas chromatography-mass spectrometry was utilised to separate and identify the volatile metabolites. A total of 37 compounds were identified, with aldehydes (hexanal, nonanal, decanal), acids (nonanoic, decanoic, dodecanoic, tetradecanoic and pentadecanoic acids) and hydrocarbons (squalane, squalene) predominant within the chemical profile. Acute barrier disruption was achieved through tape stripping (TS) of the stratum corneum to determine the impact on the volatile signature. Principle component analysis demonstrated there to be a discriminating volatile signature before and after TS. The dysregulation of significant features was examined. Several compounds derived from sebaceous components and their oxidation products were altered following barrier disruption, including squalane, squalene, octanal and nonanal. The upregulation of glycine was also observed, which may indicate a perturbation to the skin's natural moisturising factor production. TS impacted the hydro-lipid film that functions within the skin barrier, resulting in a differing volatile signature from affected skin. This provides a valuable non-invasive approach for scientific and clinical studies in dermatology, particularly around dermatological disorders associated with compromised barrier function. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  7. Stimulating in situ surfactant production to increase contaminant bioavailability and augment bioremediation of petroleum hydrocarbons

    Science.gov (United States)

    Haws, N. W.; Bentley, H. W.; Yiannakakis, A.; Bentley, A. J.; Cassidy, D. P.

    2006-12-01

    The effectiveness of a bioremediation strategy is largely dependent on relationships between contaminant sequestration (geochemical limitations) and microbial degradation potential (biological limitations). As contaminant bioavailability becomes mass transfer limited, contaminant removal will show less sensitivity to biodegradation enhancements without concurrent enhancements to rates of mass transfer into the bioavailable phase. Implementing a strategy that can simultaneously address geochemical and biological limitations is motivated by a subsurface zone of liquid petroleum hydrocarbons (LPH) contamination that is in excess of 10 acres (40,000 sq. meters). Biodegradation potential at the site is high; however, observed biodegradation rates are generally low, indicative of bioavailability limitations (e.g., low aqueous solubilities, nutrient deficiencies, and/or mass transfer limitations), and estimates indicate that bioremediation (i.e., biosparging/bioventing) with unaugmented biodegradation may be unable to achieve the remedial objectives within an acceptable time. Bench-scale experiments using soils native to the site provide evidence that, in addition to nutrient additions, a pulsed oxygen delivery can increase biodegradation rates by stimulating the microbial production of biosurfactants (rhamnolipids), leading to a reduction in surface tension and an increase in contaminant bioavailability. Pilot-scale tests at the field site are evaluating the effectiveness of stimulating in situ biosurfactant production using cyclic biosparging. The cyclic sparging creates extended periods of alternating aerobic and oxygen-depleted conditions in the submerged smear zone. The increased bioavailability of LPH and the resulting biodegradation enhancements during the test are evaluated using measurements of surface tension (as confirmation of biosurfactant accumulation) and nitrate concentrations (as substantiation of anaerobic biodegradation during shut-off periods). The

  8. Influence of carbon and nitrogen source on production of volatile fragrance and flavour metabolites by the yeast Kluyveromyces marxianus.

    Science.gov (United States)

    Gethins, Loughlin; Guneser, Onur; Demirkol, Aslı; Rea, Mary C; Stanton, Catherine; Ross, R Paul; Yuceer, Yonca; Morrissey, John P

    2015-01-01

    The yeast Kluyveromyces marxianus produces a range of volatile molecules with applications as fragrances or flavours. The purpose of this study was to establish how nutritional conditions influence the production of these metabolites. Four strains were grown on synthetic media, using a variety of carbon and nitrogen sources and volatile metabolites analysed using gas chromatography-mass spectrometry (GC-MS). The nitrogen source had pronounced effects on metabolite production: levels of the fusel alcohols 2-phenylethanol and isoamyl alcohol were highest when yeast extract was the nitrogen source, and ammonium had a strong repressing effect on production of 2-phenylethyl acetate. In contrast, the nitrogen source did not affect production of isoamyl acetate or ethyl acetate, indicating that more than one alcohol acetyl transferase activity is present in K. marxianus. Production of all acetate esters was low when cells were growing on lactose (as opposed to glucose or fructose), with a lower intracellular pool of acetyl CoA being one explanation for this observation. Bioinformatic and phylogenetic analysis of the known yeast alcohol acetyl transferases ATF1 and ATF2 suggests that the ancestral protein Atf2p may not be involved in synthesis of volatile acetate esters in K. marxianus, and raises interesting questions as to what other genes encode this activity in non-Saccharomyces yeasts. Identification of all the genes involved in ester synthesis will be important for development of the K. marxianus platform for flavour and fragrance production. Copyright © 2014 John Wiley & Sons, Ltd.

  9. A process economic assessment of hydrocarbon biofuels production using chemoautotrophic organisms.

    Science.gov (United States)

    Khan, Nymul E; Myers, John A; Tuerk, Amalie L; Curtis, Wayne R

    2014-11-01

    Economic analysis of an ARPA-e Electrofuels (http://arpa-e.energy.gov/?q=arpa-e-programs/electrofuels) process is presented, utilizing metabolically engineered Rhodobacter capsulatus or Ralstonia eutropha to produce the C30+ hydrocarbon fuel, botryococcene, from hydrogen, carbon dioxide, and oxygen. The analysis is based on an Aspen plus® bioreactor model taking into account experimentally determined Rba. capsulatus and Rls. eutropha growth and maintenance requirements, reactor residence time, correlations for gas-liquid mass-transfer coefficient, gas composition, and specific cellular fuel productivity. Based on reactor simulation results encompassing technically relevant parameter ranges, the capital and operating costs of the process were estimated for 5000 bbl-fuel/day plant and used to predict fuel cost. Under the assumptions used in this analysis and crude oil prices, the Levelized Cost of Electricity (LCOE) required for economic feasibility must be less than 2¢/kWh. While not feasible under current market prices and costs, this work identifies key variables impacting process cost and discusses potential alternative paths toward economic feasibility. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Influence of growth regulators in biomass production and volatile profile of in vitro plantlets of Thymus vulgaris L.

    Science.gov (United States)

    Affonso, Vanessa Ribeiro; Bizzo, Humberto Ribeiro; Lage, Celso Luiz Salgueiro; Sato, Alice

    2009-07-22

    In vitro shoots of thyme (Thymus vulgaris L.) were established, and the effects of the auxin indole-3-acetic (IAA) acid and the cytokinins benzyladenine (BA), zeatin (ZEA), and kinetin (KIN) at 1.0, 5.0, and 10.0 microM on rooting, biomass production, and volatile compounds production by these plants were investigated. The volatiles were extracted by solid phase microextraction (SPME) and analyzed by gas chromatography. The highest biomass shoot growth was obtained with BA at 5.0 microM, while IAA at all concentrations tested achieved 100% rooting frequency. The three major compounds were gamma-terpinene (22.8-38.8%), p-cymene (13.8-27.9%), and thymol (6.5-29.0%). Quantitative changes of these compounds were observed in response to the effect of varying growth regulators concentrations in the culture medium. Growing Thymus vulgaris L. plants in media supplemented with IAA at 1.0 microM increased volatile compounds such as thymol by 315%. Nevertheless, the same major compounds were produced in all treatments and no qualitative changes were observed in the volatile profile of thyme plants.

  11. Increased sulfur precursors and volatiles production by the leek Allium porrum in response to specialist insect attack.

    Science.gov (United States)

    Dugravot, Sebastien; Mondy, Nathalie; Mandon, Nicole; Thibout, Eric

    2005-06-01

    To defend themselves against herbivory, plants use a variety of direct and indirect strategies involving induced increases in secondary substances. Species of the Allium genus (Alliaceae), such as the leek Allium porrum (L.), produce nonprotein sulfur amino acids derived from cysteine, i.e., alk(en)yl-cysteine sulfoxides that are precursors of volatile thiosulfinates and disulfides. These defend most species including the specialist leek moth, Acrolepiopsis assectella. We determined by measuring the increase in the sulfur precursor propyl-cysteine sulfoxide (PCSO) if production of this precursor is induced in response to moth attack and mechanical wounding. The concentration of PCSO was determined by HPLC in 2- or 6-mo-old leeks after attacks of various intensity either by the specialist leek moth or by a generalist moth, Agrotis ipsilon. Injury-induced release of sulfur volatiles was measured by GC/MS after the attacks. Results showed an increase in the production of sulfur compounds in both the precursor and volatile form, occurring only in association with intensive attacks by leek moths. The increase in sulfur precursors also led to an increase in the release of sulfur volatiles. This induced response may provide an effective defense strategy against the plant's main natural enemy, both directly and indirectly by attracting entomophagous insects.

  12. Physiological tolerance and stoichiometric potential of cyanobacteria for hydrocarbon fuel production

    Czech Academy of Sciences Publication Activity Database

    Kamarainen, J.; Knoop, H.; Stanford, N.; Guerrero, F.; Akhtar, M. K.; Aro, E. M.; Steuer, Ralf; Jones, P. R.

    2012-01-01

    Roč. 162, č. 1 (2012), s. 67-74 ISSN 0168-1656 Institutional support: RVO:67179843 Keywords : Cyanobacteria * Hydrocarbon * Fuel * Toxicity * Stoichiometric potential Subject RIV: EH - Ecology, Behaviour Impact factor: 3.183, year: 2012

  13. Interwell Connectivity and Diagnosis Using Correlation of Production and Injection Rate Data in Hydrocarbon Production

    Energy Technology Data Exchange (ETDEWEB)

    Jerry L. Jensen; Larry W. Lake; Ali Al-Yousef; Dan Weber; Ximing Liang; T.F. Edgar; Nazli Demiroren; Danial Kaviani

    2007-03-31

    This report details progress and results on inferring interwell communication from well rate fluctuations. Starting with the procedure of Albertoni and Lake (2003) as a foundation, the goal of the project was to develop further procedures to infer reservoir properties through weights derived from correlations between injection and production rates. A modified method, described in Yousef and others (2006a,b), and herein referred to as the 'capacitance model', is the primary product of this research project. The capacitance model (CM) produces two quantities, {lambda} and {tau}, for each injector-producer well pair. For the CM, we have focused on the following items: (1) Methods to estimate {lambda} and {tau} from simulated and field well rates. The original method uses both non-linear and linear regression and lacks the ability to include constraints on {lambda} and {tau}. The revised method uses only non-linear regression, permitting constraints to be included as well as accelerating the solution so that problems with large numbers of wells are more tractable. (2) Approaches to integrate {lambda} and {tau} to improve connectivity evaluations. Interpretations have been developed using Lorenz-style and log-log plots to assess heterogeneity. Testing shows the interpretations can identify whether interwell connectivity is controlled by flow through fractures, high-permeability layers, or due to partial completion of wells. Applications to the South Wasson and North Buck Draw Fields show promising results. (3) Optimization of waterflood injection rates using the CM and a power law relationship for watercut to maximize economic return. Tests using simulated data and a range of oil prices show the approach is working. (4) Investigation of methods to increase the robustness of {lambda} and {tau} estimates. Human interventions, such as workovers, also cause rate fluctuations and can be misinterpreted by the model if bottom hole pressure data are not available. A

  14. Estimating emissions of toxic hydrocarbons from natural gas production sites in the Barnett Shale region

    Science.gov (United States)

    Marrero, J. E.; Townsend-Small, A.; Lyon, D. R.; Tsai, T.; Meinardi, S.; Blake, D. R.

    2015-12-01

    Throughout the past decade, shale gas operations have moved closer to urban centers and densely populated areas, contributing to growing public concerns regarding exposure to hazardous air pollutants (HAPs). These HAPs include gases like hexane, 1,3-butadiene and BTEX compounds, which can cause minor health effects from short-term exposure or possibly cancer due to prolonged exposure. During the Barnett Shale Coordinated Campaign in October, 2013, ground-based whole air samples revealed enhancements in several of these toxic volatile organic compounds (VOCs) downwind of natural gas well pads and compressor stations. Two methods were used to estimate the emission rate of several HAPs in the Barnett Shale. The first method utilized CH4 flux measurements derived from the Picarro Mobile Flux Plane (MFP) and taken concurrently with whole air samples, while the second used a CH4 emissions inventory developed for the Barnett Shale region. From these two approaches, the regional emission estimate for benzene (C6H6) ranged from 48 ± 16 to 84 ± 26 kg C6H6 hr-1. A significant regional source of atmospheric benzene is evident, despite measurement uncertainty and limited number of samples. The extent to which these emission rates equate to a larger public health risk is unclear, but is of particular interest as natural gas productions continues to expand.

  15. Assessing the biodegradation of polycyclic aromatic hydrocarbons and laccase production by new fungus Trematophoma sp. UTMC 5003.

    Science.gov (United States)

    Moghimi, Hamid; Heidary Tabar, Rezvan; Hamedi, Javad

    2017-07-01

    Environmental pollution caused by petroleum compounds has become a global concern. The aim of this study was to evaluate the indigenous fungal isolates in Iran for biodegradation of crude oil pollutants. In order to isolate fungal strains, the soil samples were enriched in minimal salts medium (MSM) with 1% crude oil and then the crude oil degradation was measured by total petroleum hydrocarbon (TPH) assay. The degradation of hydrocarbons compounds was also analysed by FT-IR and HPLC, and the activity of peroxidase enzyme and biosurfactant production were also measured. We isolated 40 fungal strains and selected the isolate G-05 with 70% degradation ability of petroleum hydrocarbons as a premium isolate after 15 days. Residual crude oil analysis with FT-IR spectrophotometry and HPLC showed that G-05 is able to degrade 90 and 100% of aliphatic compounds and some polycyclic aromatic hydrocarbons (PAH), respectively. Evaluation of enzymatic activity showed that this isolate can produce 4 U L(-1) of Laccase enzyme for oil removal; it is capable of producing biosurfactant and reducing the surface tension of the medium to 25.95 ± 0.1 m Nm(-1). This strain was identified as a member of Trematophoma genus and the obtained results showed that this strain is a highly potent strain in bioremediation of soils contaminated by crude oil.

  16. Emission characteristics and size distribution of polycyclic aromatic hydrocarbons from coke production in China

    Science.gov (United States)

    Mu, Ling; Peng, Lin; Liu, Xiaofeng; He, Qiusheng; Bai, Huiling; Yan, Yulong; Li, Yinghui

    2017-11-01

    Coking is regarded as a major source of atmospheric polycyclic aromatic hydrocarbons (PAHs), but few researches have been conducted on the emission characteristics of PAHs from coke production. In this study, emissions of size-segregated particulate matter (PM) and particle-bound PAHs emitted from charging of coal (CC) and pushing of coke (PC) in four typical coke plants were determined. The emission factors on average, sums of CC and PC, were 4.65 mg/kg, 5.96 mg/kg, 19.18 μg/kg and 20.69 μg/kg of coal charged for PM2.1 (≤ 2.1 μm), PM, PAHs in PM2.1 and total-PAHs, respectively. PM and PAHs emission from plants using stamp charging were significantly more than those using top charging. The profile of PAHs in PM with size ≤ 1.4 μm (PM1.4) emitted from CC process were similar with that from PC, however, it revealed obviously different tendency for PAHs in PM with size > 1.4 μm, indicating the different formation mechanism for coarse particles emitted from CC and PC. Size distributions of PM and PAHs indicated that they were primarily connected with PM1.4, and the contributions of PM1.4 to PM and PAHs emitted from the plants using stamp charging were higher than those using top charging. Some improved technology in air-pollution control devices should be considered in coke production in future based on the considerable impacts of PM1.4 and PAHs on human health and ambient air quality.

  17. Measurement of Gas and Volatile Elements Production Cross Section in a Molten Lead-Bismuth Target

    CERN Multimedia

    2002-01-01

    MEGAPIE is a project for a 1 MW liquid PbBi spallation source, to be built at the SINQ facility at the Paul Scherrer Institut, which will be an important step in the roadmap towards the demonstration of the ADS concept and high power molten metal targets in general. In the design and construction of such a challenging project it is extremely important to evaluate the amount and type of gas and volatile elements which will be produced, for a reliable and safe operation of the experiment. Both stable (H, $^{4}$He and other noble gases) and radioactive isotopes are of interest. Currently, different design options are under consideration to deal with the gas produced during operation. \\\\ For a correct estimation of the production cross sections, a measurement with a liquid PbBi target and a proton beam of energy close to the one of MEGAPIE (575 MeV) is necessary. We would like to use the ISOLDE facility, which offers the unique opportunity via its mass spectrometric analysis of the elements present in the gas pha...

  18. A comprehensive study on volatile fatty acids production from rice straw coupled with microbial community analysis.

    Science.gov (United States)

    Park, Gwon Woo; Seo, Charles; Jung, Kwonsu; Chang, Ho Nam; Kim, Woong; Kim, Yeu-Chun

    2015-06-01

    Rice straw is one of the most abundant renewable energy sources available. Through anaerobic acidogenesis, the substance of rice straw can be converted to volatile fatty acids (VFAs). VFAs itself is of value and is a precursor to biofuels. Hence, it can be converted to mixed alcohols by addition of hydrogen, and biodiesel can be produced as a carbon source for oleaginous microorganism. To maximize VFAs production during anaerobic digestion (AD), response surface analysis (RSM) was carried out with respect to temperature, substrate concentration, and pH variables. Optimization results showed maximal VFAs concentration of 12.37 g/L at 39.23 °C, 52.85 g/L of rice straw, and pH 10. In quantification of microbial community by quantitative polymerase chain reaction, the bacterial profile showed that the growth of methanogens was effectively inhibited by methanogenic inhibitors. Furthermore, 454 pyrosequencing showed that members of the Ruminococcaceae family, capable of hydrolyzing lignocellulosic biomass, were the most dominant species in many RSM trials. This study provided a useful insight on the biological improvement of AD performance through the combinational linkage between process parameters and microbial information.

  19. Evaporation release behavior of volatile fission products from liquid sodium pool to the inert cover gas

    Energy Technology Data Exchange (ETDEWEB)

    Nakagiri, T.; Miyahara, S. [Oarai Engineering Center, Power Reactor and Nuclear Fuel Development Corp., Oaraimachi, Ibaraki (Japan)

    1996-12-01

    In fuel failure of sodium cooled fast breeder reactors, released volatile fission products (VFPs) such as iodine and cesium from the fuel will be dissolved into the liquid sodium coolant and transferred to the cover vaporization. In the cover gas system of the reactor, natural convection occurs due to temperature differences between the sodium pool and the gas phase. The release rates of VFPs together with sodium vaporization are considered to be controlled by the convection. In this study, three analytical models are developed and examined to calculate the transient release rates using the equilibrium partition coefficients of VFPs. The calculated release rates are compared with experimental results for sodium and sodium iodide. The release rate of sodium is closest to the calculation by the heterogeneous nucleation theory. The release rate of sodium iodide obtained from the experiment is between the release rates calculated by the model based on heat-and-mass transfer analogy and the Hill`s theory. From this study, it is confirmed that the realistic release rate of sodium is able to be calculated by the model based on the heterogeneous nucleation theory. The conservative release rate of sodium iodide is able to be calculated by the model based on the Hill`s theory using the equilibrium partition coefficient of sodium iodide. (author) 7 figs., 1 tab., 3 refs.

  20. ISOTOPIC (14C) AND CHEMICAL COMPOSITION OF ATMOSPHERIC VOLATILE ORGANIC COMPOUND FRACTIONS - PRECURSORS TO OZONE FORMATION

    Science.gov (United States)

    Atmospheric volatile organic compounds (VOCs) are an important factor in the production of ozone near ground level [3]. Many hydrocarbons originate from auto exhaust. However, a number of VOCs, e.g., isoprene, are known to be natural in origin. To develop reliable models for un...

  1. Catalytic Performance for Hydrocarbon Production from Syngas on the Promoted Co-Based Hybrid Catalysts; Influence of Pt Contents

    Directory of Open Access Journals (Sweden)

    Suk-Hwan Kang

    2017-10-01

    How to Cite: Kang, S.H., Ryu, J.H., Kim, J.H., Kim, H.S., Yang, H.C., Chung, D.Y. (2017. Catalytic Performance for Hydrocarbon Production from Syngas on the Promoted Co-Based Hybrid Catalysts; Influence of Pt Contents. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (3: 452-459 (doi:10.9767/bcrec.12.3.592.452-459

  2. Biosurfactant production from marine hydrocarbon-degrading consortia and pure bacterial strains using crude oil as carbon source

    OpenAIRE

    Eleftheria eAntoniou; Stilianos eFodelianakis; Emmanouela eKorkakaki; Nicolas eKalogerakis

    2015-01-01

    Biosurfactants (BS) are green amphiphilic molecules produced by microorganisms during biodegradation, increasing the bioavailability of organic pollutants. In this work, the BS production yield of marine hydrocarbon degraders isolated from Elefsina bay in Eastern Mediterranean Sea has been investigated. The drop collapse test was used as a preliminary screening test to confirm biosurfactant producing strains or mixed consortia. The community structure of the best consortia based on the drop c...

  3. Reactive oxidation products promote secondary organic aerosol formation from green leaf volatiles

    Directory of Open Access Journals (Sweden)

    J. F. Hamilton

    2009-06-01

    Full Text Available Green leaf volatiles (GLVs are an important group of chemicals released by vegetation which have emission fluxes that can be significantly increased when plants are damaged or stressed. A series of simulation chamber experiments has been conducted at the European Photoreactor in Valencia, Spain, to investigate secondary organic aerosol (SOA formation from the atmospheric oxidation of the major GLVs cis-3-hexenylacetate and cis-3-hexen-1-ol. Liquid chromatography-ion trap mass spectrometry was used to identify chemical species present in the SOA. Cis-3-hexen-1-ol proved to be a more efficient SOA precursor due to the high reactivity of its first generation oxidation product, 3-hydroxypropanal, which can hydrate and undergo further reactions with other aldehydes resulting in SOA dominated by higher molecular weight oligomers. The lower SOA yields produced from cis-3-hexenylacetate are attributed to the acetate functionality, which inhibits oligomer formation in the particle phase. Based on observed SOA yields and best estimates of global emissions, these compounds may be calculated to be a substantial unidentified global source of SOA, contributing 1–5 TgC yr−1, equivalent to around a third of that predicted from isoprene. Molecular characterization of the SOA, combined with organic mechanistic information, has provided evidence that the formation of organic aerosols from GLVs is closely related to the reactivity of their first generation atmospheric oxidation products, and indicates that this may be a simple parameter that could be used in assessing the aerosol formation potential for other unstudied organic compounds in the atmosphere.

  4. Factors Affecting Volatile Phenol Production During Fermentations with Pure and Mixed Cultures of Dekkera bruxellensis and Saccharomyces cerevisiae

    Directory of Open Access Journals (Sweden)

    Janez Kosel

    2014-01-01

    Full Text Available The paper examines the impact of ethanol, and hidroxycinnamic and vinylphenol precursors on the production of volatile phenols in fermentations of mixed and pure cultures of yeasts Saccharomyces cerevisiae and Dekkera bruxellensis. Three different D. bruxellensis strains were examined and they all showed a unique volatile phenol production pattern in the fermentations of pure and mixed cultures. Generally, the results showed that in mixed culture fermentations less vinylphenols and more ethylphenols were produced in comparison with D. bruxellensis pure culture fermentations. Vinylphenol precursors significantly inhibited the growth of S. cerevisiae and the production of ethylphenols. Nevertheless, it was found that D. bruxellensis genes encoding for enzymes coumaric acid decarboxylase (CAD and vinylphenol reductase (VPR are more responsive to vinylphenol precursors in comparison with hidroxycinnamic acids. Consequently, higher concentrations of vinylphenols in the cell were found to be more cytotoxic than hidroxycinnamic acids. In general, low ethanol concentrations induced higher production of volatile phenols by S. cerevisiae and D. bruxellensis. This was confirmed with the expression pattern of gene encoding for CAD of D. bruxellensis.

  5. Volatility of the catalytic hydrogenation products of 1,4 bis(phenylethynyl)benzene

    Science.gov (United States)

    Sharma, Hom N.; Sangalang, Elizabeth A.; Saw, Cheng K.; Cairns, Gareth A.; McLean, William; Maxwell, Robert S.; Dinh, Long N.

    2017-11-01

    Measurements of equilibrium vapor pressures by effusion thermogravimetry and melting points by differential scanning calorimetry reveal that the melting temperature and equilibrium vapor pressures of 1,4-bis(phenylethynyl)benzene (DEB) do not vary monotonically with the hydrogenation extent. Contrary to intuition which suggests increasing volatility with hydrogenation, results indicate decreasing volatility for the first two hydrogenation steps before a non-monotonic upward trend, in which trans-isomers are less volatile. Insights on structural packing and functional groups were obtained from x-ray diffraction and infrared studies to shed light on the observed variation in the volatility of DEB with hydrogenation. Density functional theory calculations were performed to obtain molecular level information and to establish the thermodynamics of DEB hydrogenation reactions. A major factor influencing the observed melting points and volatility of the hydrogenated intermediate species is identified as the local attractive or repulsive carbon-hydrogen (CH) dipole interactions among the getter molecules in their respective crystal structures. Such collective CH dipole interactions can be used to predict the trends in the volatilities of catalytic hydrogenation processes.

  6. Volatile organic compound emissions from unconventional natural gas production: Source signatures and air quality impacts

    Science.gov (United States)

    Swarthout, Robert F.

    Advances in horizontal drilling and hydraulic fracturing over the past two decades have allowed access to previously unrecoverable reservoirs of natural gas and led to an increase in natural gas production. Intensive unconventional natural gas extraction has led to concerns about impacts on air quality. Unconventional natural gas production has the potential to emit vast quantities of volatile organic compounds (VOCs) into the atmosphere. Many VOCs can be toxic, can produce ground-level ozone or secondary organic aerosols, and can impact climate. This dissertation presents the results of experiments designed to validate VOC measurement techniques, to quantify VOC emission rates from natural gas sources, to identify source signatures specific to natural gas emissions, and to quantify the impacts of these emissions on potential ozone formation and human health. Measurement campaigns were conducted in two natural gas production regions: the Denver-Julesburg Basin in northeast Colorado and the Marcellus Shale region surrounding Pittsburgh, Pennsylvania. An informal measurement intercomparison validated the canister sampling methodology used throughout this dissertation for the measurement of oxygenated VOCs. Mixing ratios of many VOCs measured during both campaigns were similar to or higher than those observed in polluted cities. Fluxes of natural gas-associated VOCs in Colorado ranged from 1.5-3 times industry estimates. Similar emission ratios relative to propane were observed for C2-C6 alkanes in both regions, and an isopentane:n-pentane ratio ≈1 was identified as a unique tracer for natural gas emissions. Source apportionment estimates indicated that natural gas emissions were responsible for the majority of C2-C8 alkanes observed in each region, but accounted for a small proportion of alkenes and aromatic compounds. Natural gas emissions in both regions accounted for approximately 20% of hydroxyl radical reactivity, which could hinder federal ozone standard

  7. Assessment of organochlorine hydrocarbons transformation in contaminated agricultural products and foodstuffs under gamma-radiation

    Science.gov (United States)

    Mel'nikova, T. V.; Polyakova, L. P.; Oudalova, A. A.

    2017-01-01

    The problem of an estimation of organochlorinated pollutants transformation (particularly organochlorinated pesticides (OCP) and polychlorinated biphenyls (PCB)) under gamma-irradiation has become important in connection with radiation technologies application in the food industry. According to earlier researches, small doses of OCP lead to serious damages of an organism, comparable with damages from high doses. Among radiolysis products of OCP in model solutions various substances on a structure have been found out. Though of trace concentration of each of them, in sum with the initial pesticides residue they make up significant of mass contamination (as shown earlier up to 90% from initial OCP). In this work fish samples (bream) containing OCPs (15.20 ng/g of hexachlorocyclohexane isomers and 87.10 ng/g of DDT and its metabolites), as well as PCB (18.51 ng/g) were studied. The minced fish was irradiated at dose of 10 kGy with dose rate of 1.35 Gy/sec. Then, by methods of gas-liquid chromatography (GLC) and gas chromatography-mass spectrometry (GC-MS), it was found that the OCPs degradation varied from 3 up to 61% and the PCB degradation - 24-52%. Significant complication of chemical composition was shown comparing to the primary biological sample contamination. As a result of fish irradiation, secondary pollution appeared that included residues of primary organochlorine hydrocarbons and their radiation-induced metabolites. Among the investigated OCPs the most stable proved to be alfa-hexachlorocyclohexane (alfa-HCH), the least stable - DDT which corresponds to the previous findings about the radiation stability of OCPs in model solutions. Mass spectra of the irradiated samples of minced bream showed the presence of radiation metabolites of OCPs, that had also been found at irradiation of model solutions of 2,2-di(4-chlorophenyl)-1-chlorethylene (DDMU), DDD and 1a, 2e, 3e, 4e, 5e-pentahlorcyclohexane. There was revealed a decomposition product formed during the

  8. Surfactant production accompanying the modified Fenton oxidation of hydrocarbons in soil.

    Science.gov (United States)

    Ndjou'ou, Anne-Clarisse; Cassidy, Daniel

    2006-11-01

    A hydrocarbon-contaminated soil was treated in laboratory slurry reactors using two types of modified Fenton (MF) chemistry. Liquid hydrogen peroxide (HP) with Fe(3+) was compared with a calcium peroxide (CaO(2))-based oxidant (Cool-Oxtrade mark). Bioslurry treatment served as a control. During oxidation, samples of slurry filtrate were tested to quantify hydrocarbon concentrations and bulk surfactant concentrations, using the critical micelle dilution method. The results showed that both oxidants resulted in the temporary accumulation of surfactants to maximum levels of four times the critical micelle concentration, but that surfactants were completely removed by the end of treatment. Removal of surfactants was complete within 2h for liquid HP treatment versus 2 days for the CaO(2)-based oxidant. For both MF oxidants, hydrocarbon concentrations in filtrate were 3-4 orders of magnitude greater than in the biological control. Both MF oxidants also showed enhanced removal of the high molecular weight fractions of the petroleum hydrocarbons relative to biological treatment, though this effect was considerably greater with the CaO(2)-based oxidant. The chemical treatments did not considerably reduce numbers of culturable hydrocarbon-degrading microorganisms relative to the bioreactor, suggesting that chemical and biological oxidation may have occurred simultaneously in the slurry.

  9. VOLATILITY AND DISTILLATION PROPERTIES OF ETHANOL-PETROL BLENDS

    OpenAIRE

    Pospišil, Milan; Mužikova, Zlata; Šebor, Gustav

    2007-01-01

    Abstract This experimental study deals with the influence of oxy-compound content (ethanol, MTBE, ETBE) on the Reid vapour pressure (RVP) and on the distillation characteristic (ASTM D86) of petrol blends. Effect of hydrocarbon composition of petrol blends on their volatility and distillation properties was also investigated. Production, storage, distribution and utilisation of automotive fuels are associated with many technical problems especially in cases when the fuels contain som...

  10. Productions of Volatile Organic Compounds (VOCs) in Surface Waters from Reactions with Atmospheric Ozone

    Science.gov (United States)

    Hopkins, Frances; Bell, Thomas; Yang, Mingxi

    2017-04-01

    Ozone (O3) is a key atmospheric oxidant, greenhouse gas and air pollutant. In marine environments, some atmospheric ozone is lost by reactions with aqueous compounds (e.g. dissolved organic material, DOM, dimethyl sulfide, DMS, and iodide) near the sea surface. These reactions also lead to formations of volatile organic compounds (VOCs). Removal of O3 by the ocean remains a large uncertainty in global and regional chemical transport models, hampering coastal air quality forecasts. To better understand the role of the ocean in controlling O3 concentrations in the coastal marine atmosphere, we designed and implemented a series of laboratory experiments whereby ambient surface seawater was bubbled with O3-enriched, VOC-free air in a custom-made glass bubble equilibration system. Gas phase concentrations of a range of VOCs were monitored continuously over the mass range m/z 33 - 137 at the outflow of the bubble equilibrator by a proton transfer reaction - mass spectrometer (PTR-MS). Gas phase O3 was also measured at the input and output of the equilibrator to monitor the uptake due to reactions with dissolved compounds in seawater. We observed consistent productions of a variety of VOCs upon reaction with O3, notably isoprene, aldehydes, and ketones. Aqueous DMS is rapidly removed from the reactions with O3. To test the importance of dissolved organic matter precursors, we added increasing (milliliter) volumes of Emiliania huxleyi culture to the equilibrator filled with aged seawater, and observed significant linear increases in gas phase concentrations of a number of VOCs. Reactions between DOM and O3 at the sea-air interface represent a potentially significant source of VOCs in marine air and a sink of atmospheric O3.

  11. Method for the production of methane-rich gases by catalytic cracking of hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Hupfen, L.; Triebskorn, B.; Rall, W.; Baron, G.; Gross, H.W.; Ehrhardt, E.

    1976-08-26

    Hydrocarbons low in sulphur content having a boiling point similar to gasoline, gas oils having a boiling point of 165 - 360/sup 0/C and mixtures of saturated and/or unsaturated hydrocarbons with carbon numbers between C/sub 2/ and C/sub 30/ are converted in a mixture with steam in the presence of nickel catalysts in the temperature range between 350 and 550/sup 0/C to a methane-rich gas by releasing hydrogen by the cracking process of the invention and using a catalyst carrier of magnesium silicate.

  12. Thermodynamic analysis of synthetic hydrocarbon fuel production in pressurized solid oxide electrolysis cells

    DEFF Research Database (Denmark)

    Sun, Xiufu; Chen, Ming; Jensen, Søren Højgaard

    2012-01-01

    A promising way to store wind and solar electricity is by electrolysis of H2O and CO2 using solid oxide electrolysis cells (SOECs) to produce synthetic hydrocarbon fuels that can be used in existing fuel infrastructure. Pressurized operation decreases the cell internal resistance and enables...... hydrocarbon fuel and avoiding damage to the cells. The main parameters of cell operating temperature, pressure, inlet gas composition and reactant utilization are varied to examine how they influence cell thermoneutral and reversible potentials, in situ formation of methane and carbon at the Ni–YSZ electrode...

  13. Analysis of annatto (Bixa orellana) food coloring formulations. 2. Determination of aromatic hydrocarbon thermal degradation products by gas chromatography.

    Science.gov (United States)

    Scotter, M J; Wilson, L A; Appleton, G P; Castle, L

    2000-02-01

    Twenty samples of commercial annatto formulations have been analyzed for m-xylene and toluene using ambient alkaline hydrolysis, followed by solvent extraction and capillary gas chromatography. Fifteen of the samples contained annatto during source extraction and processing, resulting in contamination by internal generation of both bixin and norbixin types with aromatic hydrocarbons. Two samples of norbixin of known production history (i. e., thermal versus nonthermal processes) were analyzed specifically to identify possible differences in their degradation component profiles. They were found to differ significantly in m-xylene content, which is consistent with their respective production histories.

  14. Headspace-free setup of in vitro bioassays for the evaluation of volatile disinfection by-products.

    Science.gov (United States)

    Stalter, Daniel; Dutt, Mriga; Escher, Beate I

    2013-11-18

    The conventional setup of in vitro bioassays in microplates does not prevent the loss of volatile compounds, which hampers the toxicological characterization of waterborne volatile disinfection by-products (DBPs). To minimize the loss of volatile test chemicals, we adapted four in vitro bioassays to a headspace-free setup using eight volatile organic compounds (four trihalomethanes, 1,1-dichloroethene, bromoethane, and two haloacetonitriles) that cover a wide range of air-water partition coefficients. The nominal effect concentrations of the test chemicals decreased by up to three orders of magnitude when the conventional setup was changed to a headspace-free setup for the bacterial cytotoxicity assay using bioluminescence inhibition of Vibrio fischeri. The increase of apparent sensitivity correlated significantly with the air-water partition coefficient. Purge and trap GC/MS analysis revealed a reduced loss of dosed volatile compounds in the headspace free setup (78-130% of nominal concentration) compared to a substantial loss in the conventional set up (2-13% of the nominal concentration). The experimental effect concentrations converged with the headspace-free setup to the effect concentrations predicted by a QSAR model, confirming the suitability of the headspace-free approach to minimize the loss of volatile test chemicals. The analogue headspace-free design of the bacterial bioassays for genotoxicity (umuC assay) and mutagenicity (Ames fluctuation assay) increased the number of compounds detected as genotoxic or mutagenic from one to four and zero to two, respectively. In a bioassay with a mammalian cell line applied for detecting the induction of the Nrf-2-mediated oxidative stress response (AREc32 assay), the headspace-free setup improved the apparent sensitivity by less than one order of magnitude, presumably due to the retaining effect of the serum components in the medium, which is also reflected in the reduced aqueous concentrations of compounds. This

  15. Controlled production of Camembert-type cheeses. Part II. Changes in the concentration of the more volatile compounds.

    Science.gov (United States)

    Leclercq-Perlat, Marie-Noëlle; Latrille, Eric; Corrieu, Georges; Spinnler, Henry-Eric

    2004-08-01

    Flavour generation in cheese is a major aspect of ripening. In order to enhance aromatic qualities it is necessary to better understand the chemical and microbiological changes. Experimental Camembert-type cheeses were prepared in duplicate from pasteurized milk inoculated with Kluyveromyces lactis, Geotrichum candidum, Penicillium camemberti and Brevibacterium linens under aseptic conditions. Two replicates performed under controlled conditions of temperature (12 degrees C), relative humidity (95 +/- 2%), and atmosphere showed similar ripening characteristics. The evolutions of metabolite concentrations were studied during ripening. The volatile components were extracted by dynamic headspace extraction, separated and quantified by gas chromatography and identified by mass spectrometry. For each cheese the volatile concentrations varied with the part considered (rind or core). Except for ethyl acetate and 2-pentanone, the volatile quantities observed were higher than their perception thresholds. The flavour component production was best correlated with the starter strains. During the first 10 days the ester formations (ethyl, butyl and isoamyl acetates) were associated with the concentrations of K. lactis and G. candidum. The rind quantity of esters was lower than that observed in core probably due to (1) a diffusion from the core to the surface and (2) evaporation from the surface to the chamber atmosphere. G. candidum and Brev. linens association produced 3 methyl butanol and methyl 3-butanal from leucine, respectively. DMDS came from the methionine catabolism due to Brev. linens. Styrene production was attributed to Pen. camemberti. 2-Pentanone evolution was associated with Pen. camemberti spores and G. candidum. 2-Heptanone changes were not directly related to flora activities while 2-octanone production was essentially due to G. candidum. This study also demonstrates the determining role of volatile component diffusion.

  16. Production of aromatic hydrocarbons via catalytic pyrolysis of biomass over fe-modified HZSM-5 zeolites

    Science.gov (United States)

    Iron modified HZSM-5 catalysts were prepared by partial ion exchange of NH4ZSM-5 with Fe (II) at three different loadings (1.4, 2.8 and 4.2 wt%), and their effectiveness for producing aromatic hydrocarbons from cellulose, cellobiose, lignin and switchgrass by catalytic pyrolysis were screened using ...

  17. Study of the co-deoxy-liquefaction of biomass and vegetable oil for hydrocarbon oil production.

    Science.gov (United States)

    Chen, Yigang; Wang, Chao; Lu, Weipeng; Yang, Zhengyu

    2010-06-01

    Hydrocarbon oil was obtained by co-deoxy-liquefaction of biomass and vegetable oil in the work. Results showed the weight ratio of biomass to vegetable oil exerted a great effect on the quality of obtained hydrocarbon oil. The optimum weight ratio of biomass to vegetable oil was 4.4:1, when alkanes with the content of 50.43% were detected in obtained hydrocarbon oil, with lower oxygen content of 2.52%, which resulted in higher calorific value-up to 43.36 MJ kg(-1). At the same time, removal rate of carbonyl group of vegetable oil in the mixture reached at least 75.11%. The overall efficiency of the deoxy-liquefaction of biomass and the decarboxylation of vegetable oil were both enhanced by adding vegetable oil into biomass. Compared with the oils obtained from vegetable oil and biomass, respectively, distribution of hydrocarbon oil obtained from the mixture was much more similar to that of diesel oil. (c) 2010 Elsevier Ltd. All rights reserved.

  18. Seismic risk analysis of small earthquakes induced by hydrocarbon production in the Netherlands

    NARCIS (Netherlands)

    Wassing, B.B.T.; Waarts, P.H.; Roos, W.; Nepveu, M.; Muntendam-Bos, A.G.; Eck, T. van

    2010-01-01

    In the northern parts of The Netherlands, the exploitation of gas fields has induced small earthquakes. These induced earthquakes have occasionally caused damage to buildings. A workflow was developed in order to evaluate the seismic risk of the exploitation of hydrocarbon fields. A Bayesian

  19. Zn-Mo/HZSM-5 Catalyst for Gasoil Range Hydrocarbon Production by Catalytic Hydrocracking of Ceiba pentandra oil

    Directory of Open Access Journals (Sweden)

    Yustia Wulandari Mirzayanti

    2018-01-01

    Full Text Available Biofuel from vegetable oil becomes one of the most suitable and logical alternatives to replace fossil fuel. The research focused on various metal ratio Zinc/Molybdenum/HZSM-5 (Zn-Mo/HZSM-5 catalyst to produce liquid hydrocarbon via catalytic hydrocracking of Ceiba penandra oil. The catalytic hydrocracking process has been applied in this study to crack Ceiba pentandra oil into a gasoil range hydrocarbon using Zn-Mo/HZSM-5 as a catalyst. The effect of various reaction temperature on the catalytic hydrocracking of Ceiba pentandra oil were studied. The Zn-Mo/HZSM-5 catalyst with metal ratio was prepared by incipient wetness impregnation method. This process used slurry pressure batch reactor with a mechanical stirrer. A series of experiments were carried out in the temperature range from 300-400 oC for 2 h at pressure between 10-15 bar. The conversion and selectivity were estimated. The liquid hydrocarbon product were identified to gasoline, kerosene, and gas oil. The results show that the use of Zn-Mo/HZSM-5 can produce gas oil as the most component in the product. Overall, the highest conversion and selectivity of gas oil range hydrocarbon was obtained when the ZnMo/HZSM-5 metal ratio was Zn(2.86 wt.%-Mo(5.32 wt.%/HZSM-5 and the name is Zn-Mo/HZSM-5_102. The highest conversion was obtained at 63.31 % and n-paraffin (gas oil range selectivity was obtained at 90.75 % at a temperature of 400 oC. Ceiba pentandra oil can be recommended as the source of inedible vegetable oil to produce gasoil as an environmentally friendly transportation fuel. Copyright © 2018 BCREC Group. All rights reserved Received: 8th September 2017; Revised: 9th September 2017; Accepted: 17th September 2017; Available online: 22nd January 2018; Published regularly: 2nd April 2018 How to Cite: Mirzayanti, Y.W., Kurniawansyah, F., Prajitno, D.H., Roesyadi, A. (2018. Zn-Mo/HZSM-5 Catalyst for Gasoil Range Hydrocarbon Production by Catalytic Hydrocracking of Ceiba pentandra

  20. Method "Ethanol as Internal Standard" for determination of volatile compounds in alcohol products by gas chromatography in daily practice

    CERN Document Server

    Charapitsa, Siarhei V; Makhomet, Andrey A; Guguchkina, Tatiana I; Markovsky, Mikhail G; Yakuba, Yurii F; Kotov, Yurii N

    2016-01-01

    Recently proposed new method "Ethanol as Internal Standard" for determination of volatile compounds in alcohol products by gas chromatography (GC) is investigated from different sides including method testing on prepared standard solutions like cognac and brandy, different ethanol-water solutions and certified reference material CRM LGC5100 Whisky-Congeners. Analysis of obtained results of experimental study from four different laboratories shows that relative bias between the experimentally measured concentrations calculated in accordance with proposed method and the values of concentrations assigned during the preparation by gravimetric method for all analyzed compounds does not exceed 10 %. It is shown that relative response factors (RRF) between analyzed volatile compounds and ethanol do not depend on time of analysis and are constant for every model of GC. It is shown the possibility to use predetermined RRF in daily practice of testing laboratories and to implement this new method in the international s...

  1. The hydrogen concentration as parameter to identify natural attenuation processes of volatile chlorinated hydrocarbons in ground water; Die Wasserstoffkonzentration als Parameter zur Identifizierung des natuerlichen Abbaus von leichtfluechtigen Chlorkohlenwasserstoffen (LCKW) im Grundwasser

    Energy Technology Data Exchange (ETDEWEB)

    Alter, M.D.

    2006-06-15

    In this study, the hydrogen concentration as parameter to identify natural attenuation processes of volatile chlorinated hydrocarbons was investigated. The currently accepted and recommended bubble strip method for hydrogen sampling was optimized, and a storage method for hydrogen samples was developed. Furthermore batch experiments with a dechlorinating mixed culture and pure cultures were carried out to study H{sub 2}-concentrations of competing redox processes. The extraction of hydrogen from ground water was optimized by a reduced inlet diameter of the usually applied gas sampling bulbs, allowing a maximal turbulent ow and gas transfer. With a gas volume of 10 ml and flow rates of 50 to 140 ml/min, the course of extraction almost followed the theoretical course of equilibration. At flow rates > 100 ml/min a equilibrium of 98% was achieved within 20 min. Until recently it was generally accepted that hydrogen samples can be stored only for 2 hours and therefore have to be analyzed immediately in the eld. Here, it was shown that eld samples can be stored for 1-3 days until analysis. For the dechlorination of tetrachloroethene (PCE), a hydrogen threshold concentration of 1-2 nM was found with the dechlorinating mixed culture as well as with a pure culture of Sulfurospirillum multivorans in combination with another pure culture Methanosarcina mazei. No dechlorination was detectable below this concentration. With the dechlorinating mixed culture, this finding is valid for all successive dechlorination steps until ethene. The hydrogen threshold concentration for denitrification were below the detection limit of 0,2 nM with the dechlorinating mixed culture. A threshold concentration of 3,1-3,5 nM was found for sulphate reduction and a threshold of 7-9 nM H{sub 2} for hydrogenotrophic methanogenesis. This implies that the natural dechlorination at contaminated sites is preferred to competing processes like sulphate reduction and methanogenesis. The threshold

  2. A headspace solid-phase microextraction procedure coupled with gas chromatography-mass spectrometry for the analysis of volatile polycyclic aromatic hydrocarbons in milk samples

    Energy Technology Data Exchange (ETDEWEB)

    Aguinaga, N.; Campillo, N.; Vinas, P.; Hernandez-Cordoba, M. [University of Murcia, Department of Analytical Chemistry, Faculty of Chemistry, Murcia (Spain)

    2008-06-15

    A sensitive and solvent-free method for the determination of ten polycyclic aromatic hydrocarbons, namely, naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene and chrysene, with up to four aromatic rings, in milk samples using headspace solid-phase microextraction and gas chromatography-mass spectrometry detection has been developed. A polydimethylsiloxane-divinylbenzene fiber was chosen and used at 75 C for 60 min. Detection limits ranging from 0.2 to 5 ng L{sup -1} were attained at a signal-to-noise ratio of 3, depending on the compound and the milk sample under analysis. The proposed method was applied to ten different milk samples and the presence of six of the analytes studied in a skimmed milk with vegetal fiber sample was confirmed. The reliability of the procedure was verified by analyzing two different certified reference materials and by recovery studies. (orig.)

  3. Effect of organic loading rate on methane and volatile fatty acids productions from anaerobic treatment of palm oil mill effluent in UASB and UFAF reactors

    OpenAIRE

    Sumate Chaiprapat; Poonsuk Prasertsan; Piyarat Boonsawang; Ronnachai Chaisri

    2007-01-01

    Anaerobic treatment of palm oil mill effluent (POME) with the separation of the acidogenic and methanogenic phase was studied in an up-flow anaerobic sludge blanket (UASB) reactor and an up-flowanaerobic filter (UFAF) reactor. Furthermore, the effect of OLR on methane and volatile fatty acid productions in UASB and UFAF reactors was investigated. In this research, UASB as acidogenic reactor wasused for volatile fatty acid production and UFAF as methanogenic reactor was used for methane produc...

  4. From the shop to the drain - Volatile methylsiloxanes in cosmetics and personal care products.

    Science.gov (United States)

    Capela, Daniela; Alves, Arminda; Homem, Vera; Santos, Lúcia

    2016-01-01

    Organosiloxanes are widely used in the formulation of a broad range of cosmetic and personal care products (PCPs), including creams and lotions, bath soaps, shampoo and hair care products to soften, smooth, and moisten. In fact, the intensive and widespread use of organosiloxanes combined with their lipophilic nature, makes them interesting targets for future research, particularly in the toxicology area. This study focused on determining the concentration levels of these compounds in the bestselling brands of PCPs in the Oporto region (Portugal), allowing the estimation of dermal and inhalation exposure to siloxanes and the evaluation of the quantities released to the environment "down-the-drain" and to air. To accomplish this task, a QuEChERS technique ("Quick, Easy, Cheap, Effective, Rugged, and Safe") was employed to extract the siloxanes from the target PCPs, which has never been tested before. The resulting extract was analysed by gas chromatography-mass spectrometry (GC-MS). The limits of detection varied between 0.17 (L2) and 3.75ngg(-1) (L5), being much lower than any values reported in the literature for this kind of products. In general, satisfactory precision (body and hair washes, toilet soaps, toothpastes and shaving products) and volatile methylsiloxanes were detected in 96% of the samples, in concentrations between 0.003μgg(-1) and 1203μgg(-1). Shampoo exhibited the highest concentration for cyclic and aftershaves for linear siloxanes. Combining these results with the daily usage amounts, an average daily dermal exposure of 25.04μgkgbw(-1)day(-1) for adults and 0.35μgkgbw(-1)day(-1) for baby/children was estimated. The main contributors for adult dermal exposure were body moisturizers, followed by facial creams and aftershaves, while for babies/children were body moisturizers, followed by shower gel and shampoo. Similarly, the average daily inhalation exposure was also estimated. Values of 1.56μgkgbw(-1)day(-1) for adults and 0.03μgkgbw(-1)day

  5. Volatile fatty acids production from sewage organic matter by combined bioflocculation and anaerobic fermentation

    NARCIS (Netherlands)

    Khiewwijit, R.; Keesman, K.J.; Rijnaarts, H.H.M.; Temmink, B.G.

    2015-01-01

    This work aims at exploring the feasibility of a combined process bioflocculation to concentrate sewage organic matter and anaerobic fermentation to produce volatile fatty acids (VFA). Bioflocculation, using a high-loaded aerobic membrane bioreactor (HL-MBR), was operated at an HRT of 1 h and an SRT

  6. Methods to assess secondary volatile lipid oxidation products in complex food matrices

    DEFF Research Database (Denmark)

    Jacobsen, Charlotte; Yesiltas, Betül

    and hexanal. Different extraction methods for extracting volatiles before GC analysis can be used, e.g static headspace, dynamic headspace and solid phase microextraction. Traditionally, dynamic headspace extraction has been performed manually. However, recently automated dynamic headspace methods have become...... headspace methods on the same food matrices will be presented....

  7. VOLATILE ORGANIC COMPOUNDS AND ISOPRENE OXIDATION PRODUCTS AT A TEMPERATE DECIDUOUS FOREST SITE

    Science.gov (United States)

    Biogenic volatile compounds (BVOCs) and their role in atmospheric oxidant formation were investigated at a forest site near Oak Ridge, Tennessee, as part of the Nashville Southern Oxidants Study (SOS) in July 1995. Of 98 VOCs detected, a major fraction were anthropogenic VOCs suc...

  8. Process engineering versus product engineering - A case study on volatile organic compounds removal

    DEFF Research Database (Denmark)

    Coutinho, João A.P.; Vilela, T.; Pereira, P.

    2005-01-01

    Three solutions for removing the dangerous volatile organic compound (VOC) xylene from an industrial coating process are presented and compared. Two of them are based on classical process engineering principles, i.e., development of separation-cleaning methods such as incineration and adsorption...

  9. Volatile oxidation products formed in crude herring oil under accelerated oxidative conditions

    NARCIS (Netherlands)

    Aidos, I.; Jacobsen, C.; Jensen, B.; Luten, J.B.; Padt, van der A.; Boom, R.M.

    2002-01-01

    Crude fish oil produced from herring byproducts was evaluated on its oxidative stability by a number of complementary methods. The oil was placed in a closed vessel, exposed to pure oxygen, and kept at 50 °C for up to 53 h. Six volatile compounds contributing to off-flavor in the oil were followed

  10. Induced plant defense via volatile production is dependent on rhizobial symbiosis.

    Science.gov (United States)

    Ballhorn, Daniel J; Kautz, Stefanie; Schädler, Martin

    2013-07-01

    Nitrogen-fixing rhizobia can substantially influence plant-herbivore interactions by altering plant chemical composition and food quality. However, the effects of rhizobia on plant volatiles, which serve as indirect and direct defenses against arthropod herbivores and as signals in defense-associated plant-plant and within-plant signaling, are still unstudied. We measured the release of jasmonic acid (JA)-induced volatiles of rhizobia-colonized and rhizobia-free lima bean plants (Fabaceae: Phaseolus lunatus L.) and tested effects of their respective bouquets of volatile organic compounds (VOCs) on a specialist insect herbivore (Mexican bean beetle; Coccinellidae: Epilachna varivestis Mulsant) in olfactometer choice trials. In a further experiment, we showed that VOC induction by JA reflects the plant responses to mechanical wounding and insect herbivory. Following induction with JA, rhizobia-colonized plants released significantly higher amounts of the shikimic acid-derived compounds, whereas the emission of compounds produced via the octadecanoid, mevalonate and non-mevalonate pathways was reduced. These changes affected the choice behavior of beetles as the preference of non-induced plants was much more pronounced for plants that were colonized by rhizobia. We showed that indole likely represents the causing agent for the observed repellent effects of jasmonic acid-induced VOCs of rhizobia-colonized lima bean plants. Our study demonstrates a rhizobia-triggered efficacy of induced plant defense via volatiles. Due to these findings, we interpret rhizobia as an integral part of legume defenses against herbivores.

  11. Production of volatile aroma compounds by bacterial strains isolated from different surface-ripened French cheeses.

    Science.gov (United States)

    Deetae, Pawinee; Bonnarme, Pascal; Spinnler, Henry E; Helinck, Sandra

    2007-10-01

    Twelve bacterial strains belonging to eight taxonomic groups: Brevibacterium linens, Microbacterium foliorum, Arthrobacter arilaitensis, Staphylococcus cohnii, Staphylococcus equorum, Brachybacterium sp., Proteus vulgaris and Psychrobacter sp., isolated from different surface-ripened French cheeses, were investigated for their abilities to generate volatile aroma compounds. Out of 104 volatile compounds, 54 volatile compounds (identified using dynamic headspace technique coupled with gas chromatography-mass spectrometry [GC-MS]) appeared to be produced by the different bacteria on a casamino acid medium. Four out of eight species used in this study: B. linens, M. foliorum, P. vulgaris and Psychrobacter sp. showed a high flavouring potential. Among these four bacterial species, P. vulgaris had the greatest capacity to produce not only the widest varieties but also the highest quantities of volatile compounds having low olfactive thresholds such as sulphur compounds. Branched aldehydes, alcohols and esters were produced in large amounts by P. vulgaris and Psychrobacter sp. showing their capacity to breakdown the branched amino acids. This investigation shows that some common but rarely mentioned bacteria present on the surface of ripened cheeses could play a major role in cheese flavour formation and could be used to produce cheese flavours.

  12. Growth and production of volatiles by Staphylococcus carnosus in dry sausages:

    DEFF Research Database (Denmark)

    Tjener, Karsten; Stahnke, Louise Heller; Andersen, L.

    2004-01-01

    Three sausage batches inoculated with normal inoculation level of Pediococcus pentosaceus (5 x 10(6) CFU/g) and with low, intermediate, and high inoculation levels of Staphylococcus carnosus (10(5), 5 x 10(6), 5 x 10(7) CFU/g, respectively) were produced. Cell counts and formation of volatiles we...

  13. Radionuclides, Metals, and Hydrocarbons in Oil and Gas Operational Discharges and Environmental Samples Associated with Offshore Production Facilities on the Texas/Louisiana Continental Shelf with an Environmental Assessment of Metals and Hydrocarbons.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report presents concentrations of radionuclides, metals, and hydrocarbons in samples of produced water and produced sand from oil and gas production platforms located offshore Texas and Louisiana. concentrations in produced water discharge plume / receiving water, ambient seawater, sediment, interstitial water, and marine animal tissue samples collected in the vicinity of discharging platforms and reference sites distant from discharges are also reported and discussed. An environmental risk assessment is made on the basis of the concentration of metals and hydrocarbons determined in the samples.

  14. Radionuclides, Metals, and Hydrocarbons in Oil and Gas Operational Discharges and Environmental Samples Associated with Offshore Production Facilities on the Texas/Louisiana Continental Shelf with an Environmental Assessment of Metals and Hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Continental Shelf Associates, Inc.

    1999-08-16

    This report presents concentrations of radionuclides, metals, and hydrocarbons in samples of produced water and produced sand from oil and gas production platforms located offshore Texas and Louisiana. Concentrations in produced water discharge plume/receiving water, ambient seawater, sediment, interstitial water, and marine animal tissue samples collected in the vicinity of discharging platforms and reference sites distant from discharges are also reported and discussed. An environmental risk assessment is made on the basis of the concentrations of metals and hydrocarbons determined in the samples.

  15. Characterization by volatile compounds of microbial deep spoilage in Iberian dry-cured ham.

    Science.gov (United States)

    Martín, Alberto; Benito, María J; Aranda, Emilio; Ruiz-Moyano, Santiago; Córdoba, Juan J; Córdoba, María G

    2010-08-01

    In the present study, volatile compounds of spoiled dry-cured Iberian ham with deep spoilage or "bone taint" were analyzed and correlated with level of spoilage and the microorganisms detected. Volatile compounds extracted by a solid phase micro-extraction technique were assayed by gas chromatography/mass spectrometry. The spoiled hams were evaluated sensorially, and the correlations among volatile compounds, spoilage level, and microbial counts were studied. The spoiled hams had higher concentrations of hydrocarbons, alcohols, acids, esters, pyrazines, sulfur compounds, and other minor volatile compounds than unspoiled hams. The sensorial analysis showed that the spoilage level of hams correlated with several volatile compounds, most of them associated with Gram-positive catalase positive cocci and Enterobacteriaceae counts. Cyclic compounds such as cyclohexanone, some ethers, and pyrazines should be considered as indicators to monitor incipient microbial deep spoilage in the elaboration of this meat product.

  16. Emissions of volatile organic compounds during the ship-loading of petroleum products: Dispersion modelling and environmental concerns.

    Science.gov (United States)

    Milazzo, Maria Francesca; Ancione, Giuseppa; Lisi, Roberto

    2017-12-15

    Emissions due to ship-loading of hydrocarbons are currently not addressed neither by the Directive on the integrated pollution prevention or by other environmental regulations. The scope of this study is to point towards the environmental and safety concerns associated with such emissions, even if proper attention has not been given to this issue until now. In order to achieve this goal, the modelling of the emission volatile organic compounds (VOC), due to ship-load operations at refineries has been made by means of the definition of a simulation procedure which includes a proper treatment of the hours of calm. Afterwards, a quantitative analysis of VOC dispersion for an Italian case-study is presented with the primary aims: (i) to develop and verify the validity of the approach for the modelling of the emission sources and of the diffusion of these contaminants into the atmosphere by a proper treatment of the hours of calm and (ii) to identify their contribution to the total VOC emitted in a typical refinery. The calculated iso-concentration contours have also been drawn on a map and allowed the identification of critical areas for people protecting by the adoption of abatement solutions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. BIOTIGER, A NATURAL MICROBIAL PRODUCT FOR ENHANCED HYDROCARBON RECOVERY FROM OIL SANDS.

    Energy Technology Data Exchange (ETDEWEB)

    Brigmon, R; Topher Berry, T; Whitney Jones, W; Charles Milliken, C

    2008-05-27

    BioTiger{trademark} is a unique microbial consortia that resulted from over 8 years of extensive microbiology screening and characterization of samples collected from a century-old Polish waste lagoon. BioTiger{trademark} shows rapid and complete degradation of aliphatic and aromatic hydrocarbons, produces novel surfactants, is tolerant of both chemical and metal toxicity and shows good activity at temperature and pH extremes. Although originally developed and used by the U.S. Department of Energy for bioremediation of oil-contaminated soils, recent efforts have proven that BioTiger{trademark} can also be used to increase hydrocarbon recovery from oil sands. This enhanced ex situ oil recovery process utilizes BioTiger{trademark} to optimize bitumen separation. A floatation test protocol with oil sands from Ft. McMurray, Canada was used for the BioTiger{trademark} evaluation. A comparison of hot water extraction/floatation test of the oil sands performed with BioTiger{trademark} demonstrated a 50% improvement in separation as measured by gravimetric analysis in 4 h and a five-fold increase at 25 hr. Since BioTiger{trademark} performs well at high temperatures and process engineering can enhance and sustain metabolic activity, it can be applied to enhance recovery of hydrocarbons from oil sands or other complex recalcitrant matrices.

  18. Yeast genes involved in sulfur and nitrogen metabolism affect the production of volatile thiols from Sauvignon Blanc musts.

    Science.gov (United States)

    Harsch, Michael J; Gardner, Richard C

    2013-01-01

    Two volatile thiols, 3-mercaptohexan-1-ol (3MH), and 3-mercaptohexyl-acetate (3MHA), reminiscent of grapefruit and passion fruit respectively, are critical varietal aroma compounds in Sauvignon Blanc (SB) wines. These aromatic thiols are not present in the grape juice but are synthesized and released by the yeast during alcoholic fermentation. Single deletion mutants of 67 candidate genes in a laboratory strain of Saccharomyces cerevisiae were screened using gas chromatography mass spectrometry for their thiol production after fermentation of SB grape juice. None of the deletions abolished production of the two volatile thiols. However, deletion of 17 genes caused increases or decreases in production by as much as twofold. These 17 genes, mostly related to sulfur and nitrogen metabolism in yeast, may act by altering the regulation of the pathway(s) of thiol production or altering substrate supply. Deleting subsets of these genes in a wine yeast strain gave similar results to the laboratory strain for sulfur pathway genes but showed strain differences for genes involved in nitrogen metabolism. The addition of two nitrogen sources, urea and di-ammonium phosphate, as well as two sulfur compounds, cysteine and S-ethyl-L-cysteine, increased 3MH and 3MHA concentrations in the final wines. Collectively these results suggest that sulfur and nitrogen metabolism are important in regulating the synthesis of 3MH and 3MHA during yeast fermentation of grape juice.

  19. Temperature and solids retention time control microbial population dynamics and volatile fatty acid production in replicated anaerobic digesters

    Science.gov (United States)

    Vanwonterghem, Inka; Jensen, Paul D.; Rabaey, Korneel; Tyson, Gene W.

    2015-02-01

    Anaerobic digestion is a widely used technology for waste stabilization and generation of biogas, and has recently emerged as a potentially important process for the production of high value volatile fatty acids (VFAs) and alcohols. Here, three reactors were seeded with inoculum from a stably performing methanogenic digester, and selective operating conditions (37°C and 55°C 12 day and 4 day solids retention time) were applied to restrict methanogenesis while maintaining hydrolysis and fermentation. Replicated experiments performed at each set of operating conditions led to reproducible VFA production profiles which could be correlated with specific changes in microbial community composition. The mesophilic reactor at short solids retention time showed accumulation of propionate and acetate (42 +/- 2% and 15 +/- 6% of CODhydrolyzed, respectively), and dominance of Fibrobacter and Bacteroidales. Acetate accumulation (>50% of CODhydrolyzed) was also observed in the thermophilic reactors, which were dominated by Clostridium. Under all tested conditions, there was a shift from acetoclastic to hydrogenotrophic methanogenesis, and a reduction in methane production by >50% of CODhydrolyzed. Our results demonstrate that shortening the SRT and increasing the temperature are effective strategies for driving microbial communities towards controlled production of high levels of specific volatile fatty acids.

  20. Trace determination of volatile polycyclic aromatic hydrocarbons in natural waters by magnetic ionic liquid-based stir bar dispersive liquid microextraction.

    Science.gov (United States)

    Benedé, Juan L; Anderson, Jared L; Chisvert, Alberto

    2018-01-01

    In this work, a novel hybrid approach called stir bar dispersive liquid microextraction (SBDLME) that combines the advantages of stir bar sorptive extraction (SBSE) and dispersive liquid-liquid microextraction (DLLME) has been employed for the accurate and sensitive determination of ten polycyclic aromatic hydrocarbons (PAHs) in natural water samples. The extraction is carried out using a neodymium stir bar magnetically coated with a magnetic ionic liquid (MIL) as extraction device, in such a way that the MIL is dispersed into the solution at high stirring rates. Once the stirring is ceased, the MIL is magnetically retrieved onto the stir bar, and subsequently subjected to thermal desorption (TD) coupled to a gas chromatography-mass spectrometry (GC-MS) system. The main parameters involved in TD, as well as in the extraction step affecting the extraction efficiency (i.e., MIL amount, extraction time and ionic strength) were evaluated. Under the optimized conditions, the method was successfully validated showing good linearity, limits of detection and quantification in the low ng L(-1) level, good intra- and inter-day repeatability (RSD < 13%) and good enrichment factors (18 - 717). This sensitive analytical method was applied to the determination of trace amounts of PAHs in three natural water samples (river, tap and rainwater) with satisfactory relative recovery values (84-115%), highlighting that the matrices under consideration do not affect the extraction process. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. HP-SPME of volatile polycyclic aromatic hydrocarbons from water using multiwalled carbon nanotubes coated on a steel fiber through electrophoretic deposition

    Energy Technology Data Exchange (ETDEWEB)

    Maghsoudi, S.; Noroozian, E. [Shahid Bahonar Univ., Kerman (Iran, Islamic Republic of). Dept. of Chemistry

    2012-08-15

    A headspace solid-phase microextraction (SPME) method using a stainless steel wire electrophoretically coated with dodecylsulfate modified multiwalled carbon nanotubes was used for the gas chromatographic (GC) determination of polycyclic aromatic hydrocarbons (PAHs) in aqueous samples. Electrophoretic deposition was easily carried out from an aqueous sodium dodecylsulfate medium. The effects of various parameters on the efficiency of SPME process, such as extraction time, extraction temperature, ionic strength, desorption time, and desorption temperature were studied. Under optimized conditions, the detection limits for the various PAHs studied varied from 0.03 to 0.07 ng mL{sup -1}. The inter-day and intra-day relative standard deviations at a 10 ng mL{sup -1} concentration level (n = 7) using a single-fiber were from 5.5 to 9.7 and 4.1 to 8.5 %, respectively. The fiber-to-fiber RSD% (n = 3) was between 7.3 and 11.1 %. The linear ranges were between 0.1 and 100 ng mL{sup -1}. The method was successfully applied to the analysis of a real sample with the recoveries from 88 to 105 % for 5 ng mL{sup -1} and 89 to 101 % for 0.5 ng mL{sup -1} samples. (orig.)

  2. Stable Carbon Isotope Fractionation during Bacterial Acetylene Fermentation: Potential for Life Detection in Hydrocarbon-Rich Volatiles of Icy Planet(oid)s.

    Science.gov (United States)

    Miller, Laurence G; Baesman, Shaun M; Oremland, Ronald S

    2015-11-01

    We report the first study of stable carbon isotope fractionation during microbial fermentation of acetylene (C2H2) in sediments, sediment enrichments, and bacterial cultures. Kinetic isotope effects (KIEs) averaged 3.7 ± 0.5‰ for slurries prepared with sediment collected at an intertidal mudflat in San Francisco Bay and 2.7 ± 0.2‰ for a pure culture of Pelobacter sp. isolated from these sediments. A similar KIE of 1.8 ± 0.7‰ was obtained for methanogenic enrichments derived from sediment collected at freshwater Searsville Lake, California. However, C2H2 uptake by a highly enriched mixed culture (strain SV7) obtained from Searsville Lake sediments resulted in a larger KIE of 9.0 ± 0.7‰. These are modest KIEs when compared with fractionation observed during oxidation of C1 compounds such as methane and methyl halides but are comparable to results obtained with other C2 compounds. These observations may be useful in distinguishing biologically active processes operating at distant locales in the Solar System where C2H2 is present. These locales include the surface of Saturn's largest moon Titan and the vaporous water- and hydrocarbon-rich jets emanating from Enceladus. Acetylene-Fermentation-Isotope fractionation-Enceladus-Life detection.

  3. Stable carbon isotope fractionation during bacterial acetylene fermentation: Potential for life detection in hydrocarbon-rich volatiles of icy planet(oid)s

    Science.gov (United States)

    Miller, Laurence; Baesman, Shaun; Oremland, Ron

    2015-01-01

    We report the first study of stable carbon isotope fractionation during microbial fermentation of acetylene (C2H2) in sediments, sediment enrichments, and bacterial cultures. Kinetic isotope effects (KIEs) averaged 3.7 ± 0.5‰ for slurries prepared with sediment collected at an intertidal mudflat in San Francisco Bay and 2.7 ± 0.2‰ for a pure culture of Pelobacter sp. isolated from these sediments. A similar KIE of 1.8 ± 0.7‰ was obtained for methanogenic enrichments derived from sediment collected at freshwater Searsville Lake, California. However, C2H2 uptake by a highly enriched mixed culture (strain SV7) obtained from Searsville Lake sediments resulted in a larger KIE of 9.0 ± 0.7‰. These are modest KIEs when compared with fractionation observed during oxidation of C1 compounds such as methane and methyl halides but are comparable to results obtained with other C2compounds. These observations may be useful in distinguishing biologically active processes operating at distant locales in the Solar System where C2H2 is present. These locales include the surface of Saturn's largest moon Titan and the vaporous water- and hydrocarbon-rich jets emanating from Enceladus.

  4. Suitability of thin-layer chromatography-flame ionization detection with regard to quantitative characterization of different fossil fuel products. II. Calibration methods concerning quantitative hydrocarbon-group type analysis

    Energy Technology Data Exchange (ETDEWEB)

    Vela, J.; Membrado, L.; Cebolla, V.L.; Ferrando, A.C. [CSIC, Zaragoza (Spain). Inst. de Carboquimica, Dept. de Procesos Quimicos

    1998-10-01

    Time-consuming external standard-based calibration methods are usually performed for hydrocarbon group type analysis (HGTA) of fossil fuels, regardless of the instrumental chromatographic technique. HGTA of a broad variety of coal and petroleum products was performed using a modern thin-layer chromatography-flame ionization detection (TLC-FID) system and a rapid method based on internal normalization. Repeatability, linear intervals, and sample load ranges for quantitative application of this method are given, namely a heavy oil and its derived hydrocracked products, raw and chemically-modified petroleum asphaltenes, a coal-tar pitch, several coal extracts, and coal hydroliquefaction products. Results from external standard calibration and a normalization method (both obtained by TLC-FID) are in agreement, and they are validated using TLC-ultraviolet scanning. The use of the latter demonstrates that TLC-FID can also be applied to products such as coal extracts and hydroliquefaction products, despite these products being more volatile than petroleum asphaltenes or heavy oils. 14 refs., 3 figs., 5 tabs.

  5. Effects of volatiles on melt production and reactive flow in the mantle

    CERN Document Server

    Keller, Tobias

    2015-01-01

    Magmatism in the Earth interior has a significant impact on its dynamic, thermal and compositional evolution. Experimental studies of petrology of mantle melting find that small concentrations of water and carbon dioxide have a significant effect on the solidus temperature and distribution of melting in the upper mantle. However, it has remained unclear what effect small fractions of deep, volatile-rich melts have on melting and melt transport in the shallow asthenosphere. We present a method to simulate the thermochemical evolution of the upper mantle in the presence of volatiles. The method is based on a novel, thermodynamically consistent framework for reactive, disequilibrium, multi-component melting/crystallisation. This is coupled with a system of equations representing conservation of mass, momentum, and energy for a partially molten grain aggregate. Application of this method to upwelling-column models demonstrates that it captures leading-order features of hydrated and carbonated peridotite melting. ...

  6. Production of volatiles in fresh-cut apple: effect of applying alginate coatings containing linoleic acid or isoleucine.

    Science.gov (United States)

    Maya-Meraz, Irma O; Espino-Díaz, Miguel; Molina-Corral, Francisco J; González-Aguilar, Gustavo A; Jacobo-Cuellar, Juan L; Sepulveda, David R; Olivas, Guadalupe I

    2014-11-01

    One of the main quality parameters in apples is aroma, its main precursors are fatty acids (FA) and amino acids (AA). In this study, alginate edible coatings were used as carriers of linoleic acid or isoleucine to serve as precursors for the production of aroma in cut apples. Apple wedges were immersed in a CaCl2 solution and coated with one of the following formulations: alginate solution (Alg-Ca), Alg-Ca-low-level linoleic acid (0.61 g/Lt), (LFA), Alg-Ca-high-level linoleic acid (2.44 g/L; HFA), Alg-Ca-low-level isoleucine (0.61 g/L; LAA), and Alg-Ca-high-level isoleucine (2.44 g/L; HAA). Apple wedges were stored at 3 °C and 85% relative humidity for 21 d and key volatiles were studied during storage. Addition of precursors, mainly isoleucine, showed to increase the production of some key volatiles on coated fresh-cut apples during storage. The concentration of 2-methyl-1-butanol was 4 times higher from day 12 to day 21 in HAA, while 2-methyl butyl acetate increased from day 12 to day 21 in HAA. After 21 d, HAA-apples presented a 40-fold value of 2-methyl-butyl acetate, compared to Alg-Ca cut apples. Values of hexanal increased during cut apple storage when the coating carried linoleic acid, mainly on HFA, from 3 to 12 d. The ability of apples to metabolize AA and FA depends on the concentration of precursors, but also depends on key enzymes, previous apple storage, among others. Further studies should be done to better clarify the behavior of fresh-cut apples as living tissue to metabolize precursors contained in edible coatings for the production of volatiles. © 2014 Institute of Food Technologists®

  7. Biosurfactant production from marine hydrocarbon-degrading consortia and pure bacterial strains using crude oil as carbon source

    Directory of Open Access Journals (Sweden)

    Eleftheria eAntoniou

    2015-04-01

    Full Text Available Biosurfactants (BS are green amphiphilic molecules produced by microorganisms during biodegradation, increasing the bioavailability of organic pollutants. In this work, the BS production yield of marine hydrocarbon degraders isolated from Elefsina bay in Eastern Mediterranean Sea has been investigated. The drop collapse test was used as a preliminary screening test to confirm biosurfactant producing strains or mixed consortia. The community structure of the best consortia based on the drop collapse test was determined by 16S-rDNA pyrotag screening. Subsequently, the effect of incubation time, temperature, substrate and supplementation with inorganic nutrients, on biosurfactant production, was examined. Two types of BS - lipid mixtures were extracted from the culture broth; the low molecular weight BS Rhamnolipids and Sophorolipids. Crude extracts were purified by silica gel column chromatography and then identified by thin layer chromatography (TLC and Fourier transform infrared spectroscopy (FT-IR. Results indicate that biosurfactant production yield remains constant and low while it is independent of the total culture biomass, carbon source, and temperature. A constant BS concentration in a culture broth with continuous degradation of crude oil implies that the BS producing microbes generate no more than the required amount of biosurfactants that enables biodegradation of the crude oil. Isolated pure strains were found to have higher specific production yields than the complex microbial marine community-consortia. The heavy oil fraction of crude oil has emerged as a promising substrate for BS production (by marine BS producers with fewer impurities in the final product. Furthermore, a particular strain isolated from sediments, Paracoccus marcusii, may be an optimal choice for bioremediation purposes as its biomass remains trapped in the hydrocarbon phase, not suffering from potential dilution effects by sea currents.

  8. Biosurfactant production from marine hydrocarbon-degrading consortia and pure bacterial strains using crude oil as carbon source.

    Science.gov (United States)

    Antoniou, Eleftheria; Fodelianakis, Stilianos; Korkakaki, Emmanouela; Kalogerakis, Nicolas

    2015-01-01

    Biosurfactants (BSs) are "green" amphiphilic molecules produced by microorganisms during biodegradation, increasing the bioavailability of organic pollutants. In this work, the BS production yield of marine hydrocarbon degraders isolated from Elefsina bay in Eastern Mediterranean Sea has been investigated. The drop collapse test was used as a preliminary screening test to confirm BS producing strains or mixed consortia. The community structure of the best consortia based on the drop collapse test was determined by 16S-rDNA pyrotag screening. Subsequently, the effect of incubation time, temperature, substrate and supplementation with inorganic nutrients, on BS production, was examined. Two types of BS - lipid mixtures were extracted from the culture broth; the low molecular weight BS Rhamnolipids and Sophorolipids. Crude extracts were purified by silica gel column chromatography and then identified by thin layer chromatography and Fourier transform infrared spectroscopy. Results indicate that BS production yield remains constant and low while it is independent of the total culture biomass, carbon source, and temperature. A constant BS concentration in a culture broth with continuous degradation of crude oil (CO) implies that the BS producing microbes generate no more than the required amount of BSs that enables biodegradation of the CO. Isolated pure strains were found to have higher specific production yields than the complex microbial marine community-consortia. The heavy oil fraction of CO has emerged as a promising substrate for BS production (by marine BS producers) with fewer impurities in the final product. Furthermore, a particular strain isolated from sediments, Paracoccus marcusii, may be an optimal choice for bioremediation purposes as its biomass remains trapped in the hydrocarbon phase, not suffering from potential dilution effects by sea currents.

  9. In situ biosurfactant production and hydrocarbon removal by Pseudomonas putida CB-100 in bioaugmented and biostimulated oil-contaminated soil

    Directory of Open Access Journals (Sweden)

    Martínez-Toledo Ángeles

    2013-01-01

    Full Text Available In situ biosurfactant (rhamnolipid production by Pseudomonas putida CB-100 was achieved during a bioaugmented and biostimulated treatment to remove hydrocarbons from aged contaminated soil from oil well drilling operations. Rhamnolipid production and contaminant removal were determined for several treatments of irradiated and non-irradiated soils: nutrient addition (nitrogen and phosphorus, P. putida addition, and addition of both (P. putida and nutrients. The results were compared against a control treatment that consisted of adding only sterilized water to the soils. In treatment with native microorganisms (non-irradiated soils supplemented with P. putida, the removal of total petroleum hydrocarbons (TPH was 40.6%, the rhamnolipid production was 1.54 mg/kg, and a surface tension of 64 mN/m was observed as well as a negative correlation (R = -0.54; p < 0.019 between TPH concentration (mg/kg and surface tension (mN/m, When both bacteria and nutrients were involved, TPH levels were lowered to 33.7%, and biosurfactant production and surface tension were 2.03 mg/kg and 67.3 mN/m, respectively. In irradiated soil treated with P. putida, TPH removal was 24.5% with rhamnolipid generation of 1.79 mg/kg and 65.6 mN/m of surface tension, and a correlation between bacterial growth and biosurfactant production (R = -0.64; p < 0.009 was observed. When the nutrients and P. putida were added, TPH removal was 61.1%, 1.85 mg/kg of biosurfactants were produced, and the surface tension was 55.6 mN/m. In summary, in irradiated and non-irradiated soils, in situ rhamnolipid production by P. putida enhanced TPH decontamination of the soil.

  10. Solid phase microextraction (SPME) for extraction of volatile oxidation products from complex food systems – Pros and cons

    DEFF Research Database (Denmark)

    Jacobsen, Charlotte; Horn, Anna Frisenfeldt; Lu, Henna Fung Sieng

    advantages and drawbacks. Among the advantages of the SPME method are its high sensitivity compared to static headspace and that it is less laborious than the dynamic headspace method. For these reasons, the use of SPME has increased in both academia and industry during the last decade. The extraction...... for analysis of lipid oxidation during storage of complex food matrices. Examples on how uncontrollable factors have affected results obtained with the SPME method in the authors’ lab will be given and the appropriateness of the SPME method for the analysis of volatile oxidation products in selected food...

  11. Is Solid Phase Microextraction (SPME) an appropriate method for extraction of volatile oxidation products from complex food systems

    DEFF Research Database (Denmark)

    Jacobsen, Charlotte; Horn, Anna Frisenfeldt; Lu, Henna Fung Sieng

    advantages and drawbacks. Among the advantages of the SPME method are its high sensitivity compared to static headspace and that it is less laborious than the dynamic headspace method. For these reasons, the use of SPME has increased in both academia and industry during the last decade. The extraction...... for analysis of lipid oxidation during storage of complex food matrices. Examples on how uncontrollable factors have affected results obtained with the SPME method in the authors’ lab will be given and the appropriateness of the SPME method for the analysis of volatile oxidation products in selected food...

  12. Rare Earth Chalcogels NaLnSnS4 (Ln = Y, Gd, Tb) for Selective Adsorption of Volatile Hydrocarbons and Gases

    KAUST Repository

    Edhaim, Fatimah

    2017-06-28

    The synthesis and characterization of the rare earth chalcogenide aerogels NaYSnS4, NaGdSnS4, and NaTbSnS4 is reported. Rare earth metal ions like Y3+, Gd3+, and Tb3+ react with the chalcogenide clusters [SnS4]4– in aqueous formamide solution forming extended polymeric networks by gelation. Aerogels obtained after supercritical drying have BET surface areas of 649 m2·g–1 (NaYSnS4), 479 m2·g–1 (NaGdSnS4), and 354 m2·g–1 (NaTbSnS4). Electron microscopy and physisorption studies reveal that the new materials have pores in the macro (above 50 nm) and meso (2–50 nm) regions. These aerogels show higher adsorption of toluene vapor over cyclohexane vapor and CO2 over CH4 or H2. The notable adsorption capacity for toluene (NaYSnS4: 1108 mg·g–1; NaGdSnS4: 921 mg·g–1; and NaTbSnS4: 645 mg·g–1) and high selectivity for gases (CO2/H2: 172 and CO2/CH4: 50 for NaYSnS4, CO2/H2: 155 and CO2/CH4: 37 for NaGdSnS4, and CO2/H2: 75 and CO2/CH4: 28 for NaTbSnS4) indicate potential future use of chalcogels in adsorption-based gas or hydrocarbon separation processes.

  13. Determination of semi-volatile and particle-associated polycyclic aromatic hydrocarbons in Stockholm air with emphasis on the highly carcinogenic dibenzopyrene isomers

    Science.gov (United States)

    Masala, Silvia; Lim, Hwanmi; Bergvall, Christoffer; Johansson, Christer; Westerholm, Roger

    2016-09-01

    The concentrations of polycyclic aromatic hydrocarbons (PAHs) have been determined in the gaseous phase and in various particulate matter (PM) size fractions at different locations in and outside of Stockholm, Sweden, representative of street level, urban and rural background. The focus has been on the seldom determined but highly carcinogenic dibenzopyrene isomers (DBPs) dibenzo[a,l]pyrene, dibenzo[a,e]pyrene, dibenzo[a,i]pyrene and dibenzo[a,h]pyrene. PAHs with 3 rings were found to be mainly associated with the vapor phase (>90%) whereas PAHs with 5-6 rings were mostly associated with particulate matter (>92%) and the 4-ringed PAHs partitioned between the two phases. PAH abundance was determined to be in the order street level > urban background > rural background with the PM10 street level 2010 mean of benzo[a]pyrene (B[a]P) reaching 0.24 ng/m3, well below the EU annual limit value of 1 ng/m3. In addition, higher PAH concentrations were found in the sub-micron particle fraction (PM1) as compared to the super-micron fraction (PM1-10) with the abundance in PM1 varying between 57 and 86% of the total PAHs. The B[a]P equivalent concentrations derived for DB[a,l]P and total DBPs exceeded 1-2 and 2-4 times, respectively, that of B[a]P at the four sampling sites; therefore underestimation of the cancer risk posed by PAHs in air could be made if the DBPs were not considered in risk assessment using the toxic equivalency approach, whilst the high correlation (p carcinogenic risk associated to PAHs. However, the big difference in concentration ratios of B[a]P and the DBPs between the present study and some literature data calls for further research to evaluate the temporal and spatial invariance of the B[a]P/DBP ratios.

  14. Biosurfactant production by Pseudomonas aeruginosa DSVP20 isolated from petroleum hydrocarbon-contaminated soil and its physicochemical characterization.

    Science.gov (United States)

    Sharma, Deepak; Ansari, Mohammad Javed; Al-Ghamdi, Ahmad; Adgaba, Nuru; Khan, Khalid Ali; Pruthi, Vikas; Al-Waili, Noori

    2015-11-01

    Among 348 microbial strains isolated from petroleum hydrocarbon-contaminated soil, five were selected for their ability to produce biosurfactant based on battery of screening assay including hemolytic activity, surface tension reduction, drop collapse assay, emulsification activity, and cell surface hydrophobicity studies. Of these, bacterial isolate DSVP20 was identified as Pseudomonas aeruginosa (NCBI GenBank accession no. GQ865644) based on biochemical characterization and the 16S rDNA analysis, and it was found to be a potential candidate for biosurfactant production. Maximum biosurfactant production recorded by P. aeruginosa DSVP20 was 6.7 g/l after 72 h at 150 rpm and at a temperature of 30 °C. Chromatographic analysis and high-performance liquid chromatography-mass spectrometry (HPLC-MS) revealed that it was a glycolipid in nature which was further confirmed by nuclear magnetic resonance (NMR) spectroscopy. Bioremediation studies using purified biosurfactant showed that P. aeruginosa DSVP20 has the ability to degrade eicosane (97%), pristane (75%), and fluoranthene (47%) when studied at different time intervals for a total of 7 days. The results of this study showed that the P. aeruginosa DSVP20 and/or biosurfactant produced by this isolate have the potential role in bioremediation of petroleum hydrocarbon-contaminated soil.

  15. Isotope reversals in hydrocarbon gases of natural shale systems and well head production data

    Energy Technology Data Exchange (ETDEWEB)

    Berner, U.; Schloemer, S.; Stiller, E. [Bundesanstalt fuer Geowissenschaften und Rohstoffe (BGR), Hannover (Germany); Marquardt, D. [Rijksuniversiteit Utrecht (Netherlands)

    2013-08-01

    Relationships between gas geochemical signatures and the thermal maturity of source rocks containing aquatic organic matter are based on on pyrolysis experiments and have been successfully used in conventional hydrocarbon exploration since long. We demonstrate how these models can be applied to the evaluation of unconventional shale resources. For this purpose hydrocarbon gases have been extracted from low and high mature source rocks (type II kerogens) using laboratory desorption techniques. We determined the molecular composition of the gases as well as the carbon isotope ratios of methane to propane. In the extracted gases we observe an increase of {sup 13}C content in methane with increasing dry gas ratio (C1/{Sigma}C1-6). The carbon isotope ratios of ethane and propane initially increase with increasing dryness but start to become isotopically lighter above a dry gas ratio of 0.8. We show that oil-to-gas cracking explains the observed gas geochemical data, and that mixing between gases from different processes is a key factor to describe natural hydrocarbon systems of shales. However, data from published case studies using well head gases which show 'isotope roll-over' effects indicate that the isotopic reversal observed in well head samples deviate from those observed in natural shale systems in a fundamental way. We show that isotope reversals related to well head gases are best explained by an additional isotope fractionation effect induced through hydraulic fracturing and gas migration from the shale to the well head. Although, this induced isotope fractionation is an artifact which obscures isotopic information of natural systems to a large extend, we suggest a simple classification scheme which allows distinguishing between hot and cool spot areas using well head or mud line gas data. (orig.)

  16. Evidence of regional subsidence and associated interior wetland loss induced by hydrocarbon production, Gulf Coast region, USA

    Science.gov (United States)

    Morton, Robert A.; Bernier, Julie C.; Barras, John A.

    2006-05-01

    Analysis of remote images, elevation surveys, stratigraphic cross-sections, and hydrocarbon production data demonstrates that extensive areas of wetland loss in the northern Gulf Coast region of the United States were associated with large-volume fluid production from mature petroleum fields. Interior wetland losses at many sites in coastal Louisiana and Texas are attributed largely to accelerated land subsidence and fault reactivation induced by decreased reservoir pressures as a result of rapid or prolonged extraction of gas, oil, and associated brines. Evidence that moderately-deep hydrocarbon production has induced land-surface subsidence and reactivated faults that intersect the surface include: (1) close temporal and spatial correlation of fluid production with surficial changes including rapid subsidence of wetland sediments near producing fields, (2) measurable offsets of shallow strata across the zones of wetland loss, (3) large reductions in subsurface pressures where subsidence rates are high, (4) coincidence of orientation and direction of displacement between surface fault traces and faults that bound the reservoirs, and (5) accelerated subsidence rates near producing fields compared to subsidence rates in surrounding areas or compared to geological rates of subsidence. Based on historical trends, subsidence rates in the Gulf Coast region near producing fields most likely will decrease in the future because most petroleum fields are nearly depleted. Alternatively, continued extraction of conventional energy resources as well as potential production of alternative energy resources (geopressured-geothermal fluids) in the Gulf Coast region could increase subsidence and land losses and also contribute to inundation of areas of higher elevation.

  17. In vitro effects of Melaleuca alternifolia essential oil on growth and production of volatile sulphur compounds by oral bacteria

    Science.gov (United States)

    GRAZIANO, Talita Signoreti; CALIL, Caroline Morini; SARTORATTO, Adilson; FRANCO, Gilson César Nobre; GROPPO, Francisco Carlos; COGO-MÜLLER, Karina

    2016-01-01

    ABSTRACT Objective Halitosis can be caused by microorganisms that produce volatile sulphur compounds (VSCs), which colonize the surface of the tongue and subgingival sites. Studies have reported that the use of natural products can reduce the bacterial load and, consequently, the development of halitosis. The aim of this study was to evaluate the antimicrobial activity of the essential oil of Melaleuca alternifolia on the growth and volatile sulphur compound (VSC) production of oral bacteria compared with chlorhexidine. Material and Methods The effects of these substances were evaluated by the Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) in planktonic cultures of Porphyromonas gingivalis and Porphyromonas endodontalis. In addition, gas chromatography analyses were performed to measure the concentration of VSCs from bacterial cultures and to characterize M. alternifolia oil components. Results The MIC and MBC values were as follows: M. alternifolia - P. gingivalis (MIC and MBC=0.007%), P. endodontalis (MIC and MBC=0.007%=0.5%); chlorhexidine - P. gingivalis and P. endodontalis (MIC and MBC=1.5 mg/mL). M. alternifolia significantly reduced the growth and production of hydrogen sulfide (H2S) by P. gingivalis (p<0.05, ANOVA-Dunnet) and the H2S and methyl mercaptan (CH3SH) levels of P. endodontalis (p<0.05, ANOVA-Dunnet). Chlorhexidine reduced the growth of both microorganisms without altering the production of VSC in P. endodontalis. For P. gingivalis, the production of H2S and CH3SH decreased (p<0.05, ANOVA-Dunnet). Conclusion M. alternifolia can reduce bacterial growth and VSCs production and could be used as an alternative to chlorhexidine. PMID:28076463

  18. In vitro effects of Melaleuca alternifolia essential oil on growth and production of volatile sulphur compounds by oral bacteria

    Directory of Open Access Journals (Sweden)

    Talita Signoreti GRAZIANO

    Full Text Available ABSTRACT Objective Halitosis can be caused by microorganisms that produce volatile sulphur compounds (VSCs, which colonize the surface of the tongue and subgingival sites. Studies have reported that the use of natural products can reduce the bacterial load and, consequently, the development of halitosis. The aim of this study was to evaluate the antimicrobial activity of the essential oil of Melaleuca alternifolia on the growth and volatile sulphur compound (VSC production of oral bacteria compared with chlorhexidine. Material and Methods The effects of these substances were evaluated by the Minimum Inhibitory Concentration (MIC and Minimum Bactericidal Concentration (MBC in planktonic cultures of Porphyromonas gingivalis and Porphyromonas endodontalis. In addition, gas chromatography analyses were performed to measure the concentration of VSCs from bacterial cultures and to characterize M. alternifolia oil components. Results The MIC and MBC values were as follows: M. alternifolia - P. gingivalis (MIC and MBC=0.007%, P. endodontalis (MIC and MBC=0.007%=0.5%; chlorhexidine - P. gingivalis and P. endodontalis (MIC and MBC=1.5 mg/mL. M. alternifolia significantly reduced the growth and production of hydrogen sulfide (H2S by P. gingivalis (p<0.05, ANOVA-Dunnet and the H2S and methyl mercaptan (CH3SH levels of P. endodontalis (p<0.05, ANOVA-Dunnet. Chlorhexidine reduced the growth of both microorganisms without altering the production of VSC in P. endodontalis. For P. gingivalis, the production of H2S and CH3SH decreased (p<0.05, ANOVA-Dunnet. Conclusion M. alternifolia can reduce bacterial growth and VSCs production and could be used as an alternative to chlorhexidine.

  19. Rare earth chalcogels NaLnSnS{sub 4} (Ln = Y, Gd, Tb) for selective adsorption of volatile hydrocarbons and gases

    Energy Technology Data Exchange (ETDEWEB)

    Edhaim, Fatimah; Rothenberger, Alexander [Physical Science and Engineering Division, King Abdullah University of Science and Technology, Thuwal (Saudi Arabia)

    2017-08-16

    The synthesis and characterization of the rare earth chalcogenide aerogels NaYSnS{sub 4}, NaGdSnS{sub 4}, and NaTbSnS{sub 4} is reported. Rare earth metal ions like Y{sup 3+}, Gd{sup 3+}, and Tb{sup 3+} react with the chalcogenide clusters [SnS{sub 4}]{sup 4-} in aqueous formamide solution forming extended polymeric networks by gelation. Aerogels obtained after supercritical drying have BET surface areas of 649 m{sup 2}.g{sup -1} (NaYSnS{sub 4}), 479 m{sup 2}.g{sup -1} (NaGdSnS{sub 4}), and 354 m{sup 2}.g{sup -1} (NaTbSnS{sub 4}). Electron microscopy and physisorption studies reveal that the new materials have pores in the macro (above 50 nm) and meso (2-50 nm) regions. These aerogels show higher adsorption of toluene vapor over cyclohexane vapor and CO{sub 2} over CH{sub 4} or H{sub 2}. The notable adsorption capacity for toluene (NaYSnS{sub 4}: 1108 mg.g{sup -1}; NaGdSnS{sub 4}: 921 mg.g{sup -1}; and NaTbSnS4: 645 mg.g{sup -1}) and high selectivity for gases (CO{sub 2}/H{sub 2}: 172 and CO{sub 2}/CH{sub 4}: 50 for NaYSnS{sub 4}, CO{sub 2}/H{sub 2}: 155 and CO{sub 2}/CH{sub 4}: 37 for NaGdSnS{sub 4}, and CO{sub 2}/H{sub 2}: 75 and CO{sub 2}/CH{sub 4}: 28 for NaTbSnS{sub 4}) indicate potential future use of chalcogels in adsorption-based gas or hydrocarbon separation processes. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Optimizing headspace sampling temperature and time for analysis of volatile oxidation products in fish oil

    DEFF Research Database (Denmark)

    Rørbæk, Karen; Jensen, Benny

    1997-01-01

    Headspace-gas chromatography (HS-GC), based on adsorption to Tenax GR(R), thermal desorption and GC, has been used for analysis of volatiles in fish oil. To optimize sam sampling conditions, the effect of heating the fish oil at various temperatures and times was evaluated from anisidine values (......) and HS-CC. AV indicated sample degradations at 90 degrees C but only small alterations between 60 and 75 degrees C. HS-GC showed increasing response with temperature and rime. Purging at 75 degrees C for 45 min was selected as the preferred sampling condition for oxidized fish oil....

  1. Influence of environmental conditions on production of volatiles by Trichoderma atroviride in relation with the sick building syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Polizzi, Viviana [Ghent University, Faculty of Bioscience Engineering, Department of Sustainable Organic Chemistry and Technology, Coupure links 653, B-9000 Ghent (Belgium); Ghent University, Faculty of Pharmaceutical Sciences, Laboratory of Food Analysis, Harelbekestraat 72, B-9000 Ghent (Belgium); Adams, An; De Kimpe, Norbert [Ghent University, Faculty of Bioscience Engineering, Department of Sustainable Organic Chemistry and Technology, Coupure links 653, B-9000 Ghent (Belgium); Picco, Anna Maria [Pavia University, Faculty of Sciences, Department of Territorial Ecology and Environment, via S. Epifanio 14, 27100 Pavia (Italy); Adriaens, Els; Lenoir, Joke [Ghent University, Faculty of Pharmaceutical Sciences, Laboratory of Pharmaceutical Technology, Harelbekestraat 72, B-9000 Ghent (Belgium); Van Peteghem, Carlos; De Saeger, Sarah [Ghent University, Faculty of Pharmaceutical Sciences, Laboratory of Food Analysis, Harelbekestraat 72, B-9000 Ghent (Belgium)

    2011-04-15

    A Trichoderma atroviride strain was isolated from a water-damaged office and the production of microbial volatile organic compounds (MVOCs) was investigated by means of headspace solid phase microextraction GC-MS. Different growth conditions (substrate, temperature, relative humidity) were selected, resembling indoor parameters, to elucidate a possible relationship between MVOCs, produced by Trichoderma atroviride, and the Sick Building Syndrome. In general, the range of MVOCs and the emitted quantities were larger on malt extract agar (MEA) than on wallpaper and plasterboard. Particular attention was dedicated to the volatile marker 6-pentyl-2-pyrone, a compound produced in high quantities on MEA, and its mucosal irritation potency was shown in a slug mucosal irritation assay. Some compounds characteristic for growth on specific building materials were detected, e.g. 2-ethylcyclopentanone, menthone, iso-menthone and trans-p-menth-2-en-7-ol on plasterboard and 4-heptanone and 1-octen-3-ol on wallpaper. Relative humidity and substrate had a more important effect on MVOC production than temperature. (author)

  2. An error-resilient non-volatile magneto-elastic universal logic gate with ultralow energy-delay product.

    Science.gov (United States)

    Biswas, Ayan K; Atulasimha, Jayasimha; Bandyopadhyay, Supriyo

    2014-12-23

    A long-standing goal of computer technology is to process and store digital information with the same device in order to implement new architectures. One way to accomplish this is to use nanomagnetic logic gates that can perform Boolean operations and then store the output data in the magnetization states of nanomagnets, thereby doubling as both logic and memory. Unfortunately, many of these nanomagnetic devices do not possess the seven essential characteristics of a Boolean logic gate : concatenability, non-linearity, isolation between input and output, gain, universal logic implementation, scalability and error resilience. More importantly, their energy-delay products and error rates tend to vastly exceed that of conventional transistor-based logic gates, which is unacceptable. Here, we propose a non-volatile voltage-controlled nanomagnetic logic gate that possesses all the necessary characteristics of a logic gate and whose energy-delay product is two orders of magnitude less than that of other nanomagnetic (non-volatile) logic gates. The error rate is also superior.

  3. Hydrocarbons and heavy metals in fine particulates in oil field air: possible impacts on production of natural silk.

    Science.gov (United States)

    Devi, Gitumani; Devi, Arundhuti; Bhattacharyya, Krishna Gopal

    2016-02-01

    Analyses of fine particulates (PM2.5) from the upper Assam oil fields of India indicated considerable presence of higher hydrocarbons (C22-C35) and heavy metals, Cd, Co, Cr, Cu, Ni, Pb, and Zn. This has raised serious concern for the sustainability of the exotic Muga (Antheraea assama) silk production, which has been a prime activity of a large number of people living in the area. The Muga worm feeds on the leaves of Machilus bombycina plant, and the impacts of air quality on its survival were further investigated by analyzing the leaves of the plant, the plantation soil, and the Muga cocoons. PM2.5 content in the air was much more during the winter due to near calm conditions and high humidity. Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and gas chromatography-mass spectrometer (GC-MS) analysis of PM2.5 showed the presence of higher alkanes (C22-C35) that could be traced to crude oil. Cr, Ni, and Zn were found in higher concentrations in PM2.5, M. bombycina leaves, and the plantation soil indicating a common origin. The winter has been the best period for production of the silk cocoons, and the unhealthy air during this period is likely to affect the production, which is already reflected in the declining yield of Muga cocoons from the area. SEM and protein analyses of the Muga silk fiber produced in the oil field area have exhibited the deteriorating quality of the silk. This is the first report from India on hydrocarbons and associated metals in PM2.5 collected from an oil field and on their possible effects on production of silk by A. assama.

  4. Effects of Catalyst Preparation on Hydrocarbon Product Distribution in Hydrocracking of the Fischer-Tropsch Product with Low Pt-Loaded Catalysts

    Directory of Open Access Journals (Sweden)

    Toshiaki Hanaoka

    2015-11-01

    Full Text Available For the effective production of hydrocarbon liquid fuel in the hydrocracking of the Fischer-Tropsch (FT product, the catalytic performance of Pt-loaded catalysts with low Pt content was investigated using an autoclave at 250 °C, an initial H2 pressure of 0.5 MPa, and a reaction time of 1 h. A screening study using Pt-loaded catalysts with a Pt content of 0.1 wt. % indicated that zeolite supports were more favorable for jet fuel (carbon numbers 9–15 production than amorphous oxide supports. The small particle size of the supported Pt particles and the high amount of medium acid sites for the supports led to higher performance of the Pt-loaded zeolite catalysts. In the hydrocracking reaction over Pt catalysts using the zeolite support with the high amount of medium acid sites, the yields of the corresponding jet fuel at 0.02 and 0.1 wt. % were almost the same. Pt-loaded catalysts with a Pt content of 0.02 wt. % were prepared using water-in-oil (w/o microemulsions and their particle size was controlled between 1.0 and 2.6 nm. While the yield of the corresponding jet fuel was independent of Pt particle size, smaller Pt particles typically promoted the production of lighter hydrocarbons.

  5. The effect of sugar concentration and temperature on growth and volatile phenol production by Dekkera bruxellensis in wine.

    Science.gov (United States)

    Barata, André; Pagliara, Daniela; Piccininno, Tiziana; Tarantino, Francesco; Ciardulli, Wilma; Malfeito-Ferreira, Manuel; Loureiro, Virgílio

    2008-11-01

    The wine spoilage yeast Dekkera bruxellensis was evaluated for the production of 4-ethylphenol under low concentrations (0.02-20 g L(-1)) of glucose and fructose in synthetic media. Measurable amounts of 4-ethylphenol were produced over 0.2 g L(-1) of each sugar. The yeast growth rate and amount of biomass formed increased from 0.2 to 20 g L(-1) of glucose or fructose, being accompanied by increasing production of 4-ethylphenol. In red wines, the production of 4-ethylphenol was only observed in the presence of growing populations of indigenous or inoculated strains of D. bruxellensis. The production rate of 4-ethylphenol varied between 22 and 93 mug day(-1) either with inoculated strains or wild populations in bottled wines. The production rate of 4-ethylphenol as a function of the increase in the number of cells varied from 349 to 1882 mug L(-1) per one log CFU mL(-1). The effect of temperature on cellular viability and 4-ethylphenol production was tested in red wines with indigenous or inoculated strains of D. bruxellensis. Incubation temperatures of 15, 20 and 25 degrees C allowed cellular growth and volatile phenol production. Increasing incubation temperatures to 36 degrees C induced full viability loss of 10 strains of D. bruxellensis within <12 h.

  6. Planar chromatography for the hydrocarbon group type analysis of petroleum middle distillates and coal-derived products

    Energy Technology Data Exchange (ETDEWEB)

    Matt, Muriel; Gruber, Rene [Laboratoire de thermodynamique et d' analyses chimiques, Universite de Metz, Ile du Saulcy, UFR SciFA, 57045 cedex 1 Metz (France); Galvez, Eva; Cebolla, Vicente; Membrado, Luis; Vela, Jesus [Instituto de Carboquimica, CSIC, Miguel Luesma Castan 4, 50015 Zaragoza (Spain)

    2002-06-20

    Different methodologies, based on planar chromatography/detection with densitometry, have been used to analyse compound classes (also known as hydrocarbon group type (HGT)) in samples coming from petroleum and coal conversion. The main problem encountered to analyse these samples is the choice of standard: because of the high variability of the signal that is dependent of molecular structure, one pure hydrocarbon does not reflect the response of a mixture. However, a step based on thin layer chromatography at preparative scale has allowed the fractionation of sample to obtain its derived standards. After this, alkanes have been quantified by fluorescence in presence of berberine sulfate and aromatic compounds have been detected by UV after separation by high performance thin layer chromatography (HPTLC) at analytical scale.The feasibility of the planar chromatography has been tested. The quantitative results obtained for different samples are in agreement with those provided using well-established techniques in the petrochemical industry and the coal-derived product (CDP) analysis.

  7. ANTIFUNGAL ACTIVITY OF VOLATILE COMPONENTS GENERATED BY ESSENTIAL OILS AGAINST THE GENUS PENICILLIUM ISOLATED FROM BAKERY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Miroslava Císarová

    2015-02-01

    Full Text Available The aim of this study was evaluation of the antifungal activity of 5 essential oils (EOs. We concretely used thyme, clove, basil, jasmine and rosemary EOs by vapor contact against the fungal species, namely Penicillium citrinum, P. chrysogenum, P. hordei, P. citreonigrum, and P. viridicatum and their ability to affect production of mycotoxins. Each fungus was inoculated in the centre on Czapek Yeast Autolysate Agar (CYA dishes. Dishes were tightly sealed with parafilm and incubated for fourteen days at 25 ± 1 °C (three replicates were used for each treatment. Volatile phase effect of 50 μl of the essential oils was found to inhibit on growth of Penicillium spp.. Complete growth inhibition of the isolates by EOs of thyme and clove was observed. The EO of basil had antifungal effect on growth of P. citreonigrum only after 3rd and 7th day of the incubation at concentration 100 % of EO, like a P. viridicatum, which was inhibited by basil EO (100 % in comparison with control sets. Data was evaluated statistically by 95.0 % Tukey HSD test. In this study we also tested potentional effect of EOs to affect production of mycotoxins of tested Penicillium isolates which are potential toxigenic fungi. After 14 days of incubation with EOs (100 % with control sets, they were screened for a production of mycotoxins by TLC chromatography. Results showed non affecting production of mycotoxins by tested EOs. Conclusions indicate that volatile phase of combinations of thyme oil and clove oil showed good potential in the inhibition of growth of Penicillium spp. EOs should find a practical application in the inhibition of the fungal mycelial growth in some kind of the food.

  8. Plant hydrocarbon recovery process

    Energy Technology Data Exchange (ETDEWEB)

    Dzadzic, P.M.; Price, M.C.; Shih, C.J.; Weil, T.A.

    1982-01-26

    A process for production and recovery of hydrocarbons from hydrocarbon-containing whole plants in a form suitable for use as chemical feedstocks or as hydrocarbon energy sources which process comprises: (A) pulverizing by grinding or chopping hydrocarbon-containing whole plants selected from the group consisting of euphorbiaceae, apocynaceae, asclepiadaceae, compositae, cactaceae and pinaceae families to a suitable particle size, (B) drying and preheating said particles in a reducing atmosphere under positive pressure (C) passing said particles through a thermal conversion zone containing a reducing atmosphere and with a residence time of 1 second to about 30 minutes at a temperature within the range of from about 200* C. To about 1000* C., (D) separately recovering the condensable vapors as liquids and the noncondensable gases in a condition suitable for use as chemical feedstocks or as hydrocarbon fuels.

  9. Determination of polycyclic aromatic hydrocarbons in Canadian samples of processed vegetable and dairy products by liquid chromatography with fluorescence detection

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, J.F.; Weber, D.F.

    An HPLC-fluorescence method was developed and used for the determination of 15 polycyclic aromatic hydrocarbons (PAH) in samples of milled wheat, finished cereals, milk powders, malt, spinach, and cooking oils. Results showed that the bran portion of milled wheat as well as finished bran ceral had a considerably high PAH content than other fractions or finished products. The use of direct heating or drying milk powders and malt was found in some cases to lead to elevated levels of PAH, and these were found to correlate with levels of nitrosamines present. Three samples of spinach had very low levels of PAH while two of three types of cooking oils had levels of carcinogenic PAH in the low micrograms per kilogram range. 18 references, 3 figures, 4 tables.

  10. “Gold” Pressed Essential Oil: An Essay on the Volatile Fragment from Citrus Juice Industry By-Products Chemistry and Bioactivity

    Directory of Open Access Journals (Sweden)

    V. N. Kapsaski-Kanelli

    2017-01-01

    Full Text Available Present essay explores the potentials of Citrus juice industry’s by-products as alternative bioactive natural products resources. Four crude Cold Pressed Essential Oils (CPEOs, derived from orange, lemon, grapefruit, and mandarin, were studied. All CPEOs were subjected to water distillation, in order to obtain the volatile fragment, which was further fractionated with respect to distillation period in two parts, concluding to eight samples. These samples along with the four original CPEOs were assessed in relation to their phytochemical content and their repellent and larvicidal properties against Asian Tiger Mosquito. The volatiles recovery rates ranged from 74% to 88% of the CPEO. Limonene presented a significant increase in all samples ranging from 8% to 52% of the respective CPEO’s content and peaked in mandarin’s 2nd volatile fragment which comprised 97% of the essential oil. The refinement process presented clear impacts on both bioassays: a significant increase in larvicidal potency was observed, annotated best by the improvement by 1100% and 1300% of the grapefruit volatile fractions; repellence testing provided only one significant result, the decrease of landings by 50% as a response to mandarin’s second volatile fraction. The applied methodology thus may be considered for the improvement of Citrus juice industry’s by-products chemistry and bioactivity.

  11. “Gold” Pressed Essential Oil: An Essay on the Volatile Fragment from Citrus Juice Industry By-Products Chemistry and Bioactivity

    Science.gov (United States)

    Kapsaski-Kanelli, V. N.; Papachristos, D. P.; Myrtsi, E. D.; Koulocheri, S. D.

    2017-01-01

    Present essay explores the potentials of Citrus juice industry's by-products as alternative bioactive natural products resources. Four crude Cold Pressed Essential Oils (CPEOs), derived from orange, lemon, grapefruit, and mandarin, were studied. All CPEOs were subjected to water distillation, in order to obtain the volatile fragment, which was further fractionated with respect to distillation period in two parts, concluding to eight samples. These samples along with the four original CPEOs were assessed in relation to their phytochemical content and their repellent and larvicidal properties against Asian Tiger Mosquito. The volatiles recovery rates ranged from 74% to 88% of the CPEO. Limonene presented a significant increase in all samples ranging from 8% to 52% of the respective CPEO's content and peaked in mandarin's 2nd volatile fragment which comprised 97% of the essential oil. The refinement process presented clear impacts on both bioassays: a significant increase in larvicidal potency was observed, annotated best by the improvement by 1100% and 1300% of the grapefruit volatile fractions; repellence testing provided only one significant result, the decrease of landings by 50% as a response to mandarin's second volatile fraction. The applied methodology thus may be considered for the improvement of Citrus juice industry's by-products chemistry and bioactivity. PMID:29109957

  12. Changes in salivary microbiota increase volatile sulfur compounds production in healthy male subjects with academic-related chronic stress.

    Science.gov (United States)

    Nani, Bruno Dias; Lima, Patricia Oliveira de; Marcondes, Fernanda Klein; Groppo, Francisco Carlos; Rolim, Gustavo Sattolo; Moraes, Antonio Bento Alves de; Cogo-Müller, Karina; Franz-Montan, Michelle

    2017-01-01

    To investigate the associations among salivary bacteria, oral emanations of volatile sulfur compounds, and academic-related chronic stress in healthy male subjects. Seventy-eight healthy male undergraduate dental students were classified as stressed or not by evaluation of burnout, a syndrome attributed to academic-related chronic stress. This evaluation was carried out using the Maslach Burnout Inventory-Student Survey questionnaire. Oral emanations of hydrogen sulfide, methyl mercaptan, and dimethyl sulfide were measured using an Oral Chroma™ portable gas chromatograph. The amounts in saliva of total bacteria and seven bacteria associated with halitosis were quantified by qPCR. The in vitro production of H2S by S. moorei and/or F. nucleatum was also measured with the Oral Chroma™ instrument. The stressed students group showed increased oral emanations of hydrogen sulfide and dimethyl sulfide, together with higher salivary Solobacterium moorei levels (p stressed group (p stressed subjects.

  13. Volatility Discovery

    DEFF Research Database (Denmark)

    Dias, Gustavo Fruet; Scherrer, Cristina; Papailias, Fotis

    The price discovery literature investigates how homogenous securities traded on different markets incorporate information into prices. We take this literature one step further and investigate how these markets contribute to stochastic volatility (volatility discovery). We formally show...... that the realized measures from homogenous securities share a fractional stochastic trend, which is a combination of the price and volatility discovery measures. Furthermore, we show that volatility discovery is associated with the way that market participants process information arrival (market sensitivity......). Finally, we compute volatility discovery for 30 actively traded stocks in the U.S. and report that Nyse and Arca dominate Nasdaq....

  14. Volatile Fatty Acids Production from Codigestion of Food Waste and Sewage Sludge Based on β-Cyclodextrins and Alkaline Treatments

    Directory of Open Access Journals (Sweden)

    Xue Yang

    2016-01-01

    Full Text Available Volatile fatty acids (VFAs are preferred valuable resources, which can be produced from anaerobic digestion process. This study presents a novel technology using β-cyclodextrins (β-CD pretreatment integrated alkaline method to enhance VFAs production from codigestion of food waste and sewage sludge. Experiment results showed that optimized ratio of food waste to sewage sludge was 3 : 2 because it provided adequate organic substance and seed microorganisms. Based on this optimized ratio, the integrated treatment of alkaline pH 10 and β-CD addition (0.2 g/g TS performed the best enhancement on VFAs production, and the maximum VFAs production was 8631.7 mg/L which was 6.13, 1.38, and 1.57 times higher than that of control, initial pH 10, and 0.2 g β-CD/g TS treatment, respectively. Furthermore, the hydrolysis rate of protein and polysaccharides was greatly improved in integration treatment, which was 1.18–3.45 times higher than that of other tests. Though the VFAs production and hydrolysis of polymeric organics were highly enhanced, the primary bacterial communities with different treatments did not show substantial differences.

  15. Volatile Fatty Acids Production from Codigestion of Food Waste and Sewage Sludge Based on β-Cyclodextrins and Alkaline Treatments.

    Science.gov (United States)

    Yang, Xue; Liu, Xiang; Chen, Si; Liu, Guangmin; Wu, Shuyan; Wan, Chunli

    2016-01-01

    Volatile fatty acids (VFAs) are preferred valuable resources, which can be produced from anaerobic digestion process. This study presents a novel technology using β-cyclodextrins (β-CD) pretreatment integrated alkaline method to enhance VFAs production from codigestion of food waste and sewage sludge. Experiment results showed that optimized ratio of food waste to sewage sludge was 3 : 2 because it provided adequate organic substance and seed microorganisms. Based on this optimized ratio, the integrated treatment of alkaline pH 10 and β-CD addition (0.2 g/g TS) performed the best enhancement on VFAs production, and the maximum VFAs production was 8631.7 mg/L which was 6.13, 1.38, and 1.57 times higher than that of control, initial pH 10, and 0.2 g β-CD/g TS treatment, respectively. Furthermore, the hydrolysis rate of protein and polysaccharides was greatly improved in integration treatment, which was 1.18-3.45 times higher than that of other tests. Though the VFAs production and hydrolysis of polymeric organics were highly enhanced, the primary bacterial communities with different treatments did not show substantial differences.

  16. Increased biohydrogen yields, volatile fatty acid production and substrate utilisation rates via the electrodialysis of a continually fed sucrose fermenter.

    Science.gov (United States)

    Jones, Rhys Jon; Massanet-Nicolau, Jaime; Mulder, Martijn J J; Premier, Giuliano; Dinsdale, Richard; Guwy, Alan

    2017-04-01

    Electrodialysis (ED) removed volatile fatty acids (VFAs) from a continually-fed, hydrogen-producing fermenter. Simultaneously, electrochemical removal and adsorption removed gaseous H2 and CO2, respectively. Removing VFAs via ED in this novel process increased H2 yields by a factor of 3.75 from 0.24molH2mol-1hexose to 0.90molH2mol-1hexose. VFA production and substrate utilisation rates were consistent with the hypothesis that end product inhibition arrests H2 production. The methodology facilitated the recovery of 37g of VFAs, and 30L H2 that was more than 99% pure, both of which are valuable, energy dense chemicals. Typically, short hydraulic and solid retention times, and depressed pH levels are used to suppress methanogenesis, but this limits H2 production. To produce H2 from real world, low grade biomass containing complex carbohydrates, longer hydraulic retention times (HRTs) are required. The proposed system increased H2 yields via increased substrate utilisation over longer HRTs. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  17. Continuous liquid fermentation of pretreated waste activated sludge for high rate volatile fatty acids production and online nutrients recovery.

    Science.gov (United States)

    Zhang, Lihui; Liu, He; Zheng, Zhiyong; Ma, Huijun; Yang, Meng; Liu, Hongbo

    2017-11-04

    Raw sludge was pretreated, and the separated sludge liquid was used as substrate in a continuous operated up-flow anaerobic sludge blanket reactor to produce volatile fatty acids (VFAs). The highest VFA productivity of continuous fermentation with sludge liquid at an organic loading rate (OLR) of 10.0 kg COD/m3/d was about 5.0-fold and 4.0-fold higher than batch and semi-continuous fermentation with pretreated sludge slurry, respectively. Moreover, the liquid fermentation with an OLR of 10.0 kg COD/m3/d consumed the least energy, which was about 10.57% and 12.12% of batch and semi-continuous sludge fermentation, respectively. When combined with online nitrogen and phosphorus recovery, VFA production further increased by 20.67% and struvite recovery efficiency reached 1.98  ±  0.28 g/g PO43-. The process showed high VFA production, low energy consumption and good nutrients recovery by continuous liquid anaerobic fermentation, significantly increasing the economic potential of VFA production from waste activated sludge. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. [Analysis of volatile sulfur compounds production of oral cavity in preschool children and influencing factors].

    Science.gov (United States)

    Zhang, Qun; Liu, Xue-nan; Chang, Qing; Ao, Shuang; Zheng, Shu-guo; Xu, Tao

    2015-12-18

    To investigate the prevalence of volatile sulfur compounds(VSC) in oral cavity of preschool children, and to analyze related factors, thus to provide scientific basis for the prediction and treatment of halitosis. The VSC content (hydrogen sulfide, methyl mercaptan, dimethyl sulfide) of 170 preschool children (4 to 6 years old) was detected by a portable gas chromatograph OralChromaTM. The status of the oral health was evaluated. The living habits and other aspects were obtained through questionnaires from the children's parents. A soft package for social statistics version 13.0 (SPSS 13.0) was used in which univariate analysis and multivariate analysis were utilized to analyze the related factors of halitosis in children. In the study, 34.4% of the total subjects had excessive VSC. Hydrogen sulfide (H₂S) [(1.59 ± 2.41) ng/10 mL] and total VSC concentration [(2.14 ± 4.42) ng/10 mL] in the girls were significantly higher (Pdessert or sweat drinks more frequently had lower H2S [(1.04 ± 1.55) ng/10 mL, Pdessert or sweat drinks and dry mouth breath were related with halitosis of preschool children. The different related factors resulted in changes of each VSC concentration.

  19. Role of Ozone in the Production of Volatile Organoiodine Compounds in Surface Seawater

    Science.gov (United States)

    Liss, Peter S.; Martino, Manuela

    2010-05-01

    The interaction of ozone in the atmosphere-ocean system is a topic of central importance to SOLAS science. It is known that the rate of deposition of atmospheric ozone to the sea surface is considerably enhanced by its reaction with components in seawater. We present results of laboratory experiments which show that iodide ions (I-)and organic material (OM) are involved as reactants with ambient levels of ozone, with both I- and OM of approximately equal importance in enhancing the interfacial transfer. Once taken up by seawater the ozone can lead to the formation of a variety of volatile organoiodine compounds, such as diiodomethane (CH2I2), chloroiodomethane (CH2ClI) and iodoform (CHI3), as shown in our recent experimental work (Martino et al., Geophysical Research Letters, Vol. 36, L01609, doi:10.1029/2008GL036334, 2009). These compounds are then free to transfer across the ocean-atmosphere interface and so constitute a ubiquitous source of reactive iodine-containing gases to the marine atmosphere. In the atmosphere these gases photodissociate within minutes (CH2I2), hours (CH2ClI) and days (iodomethane), producing iodine atoms, which are known to catalytically destroy tropospheric ozone to form iodine oxide (IO) radicals and, in coastal zones with seaweed beds, can play a role in new paraticle formation.

  20. Medical costs and lost productivity from health conditions at volatile organic compound-contaminated Superfund sites

    Energy Technology Data Exchange (ETDEWEB)

    Lybarger, J.A.; Spengler, R.F.; Brown, D.R. [Agency for Toxic Substances and Disease Registry, Atlanta, GA (United States). Div. of Health Studies; Lee, R.; Vogt, D.P. [Oak Ridge National Lab., TN (United States)]|[Joint Inst. for Energy and Environment, Oak Ridge, TN (United States); Perhac, R.M. Jr. [Univ. of Tennessee, Knoxville, TN (United States)]|[Joint Inst. for Energy and Environment, Oak Ridge, TN (United States)

    1998-10-01

    This paper estimates the health costs at Superfund sites for conditions associated with volatile organic compounds (VOCs) in drinking water. Health conditions were identified from published literature and registry information as occurring at excess rates in VOC-exposed populations. These health conditions were: (1) some categories of birth defects, (2) urinary tract disorders, (3) diabetes, (4) eczema and skin conditions, (5) anemia, (6) speech and hearing impairments in children under 10 years of age, and (7) stroke. Excess rates were used to estimate the excess number of cases occurring among the total population living within one-half mile of 258 Superfund sites. These sites had evidence of completed human exposure pathways for VOCs in drinking water. For each type of medical condition, an individual`s expected medical costs, long-term care costs, and lost work time due to illness or premature mortality were estimated. Costs were calculated to be approximately $330 million per year, in the absence of any remediation or public health intervention programs. The results indicate the general magnitude of the economic burden associated with a limited number of contaminants at a portion of all Superfund sites, thus suggesting that the burden would be greater than that estimated in this study if all contaminants at all Superfund sites could be taken into account.

  1. Production of polyhydroxy alkanoates by Ralstonia eutropha from volatile fatty acids

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Jung Hyun; Sawant, Shailesh S.; Kim, Beom Soo [Chungbuk National University, Cheongju (Korea, Republic of)

    2013-12-15

    Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible thermoplastics that can be synthesized in various microorganisms. Volatile fatty acids (VFAs) are produced by anaerobic treatment of organic wastes that can be utilized as inexpensive substrates for PHA synthesis. In this study, several Ralstonia eutropha strains were grown on the mixture of VFAs (acetic, propionic, and butyric acid) as its carbon and energy source for growth and PHA synthesis. R. eutropha KCTC 2658 accumulated PHAs up to 50% of dry cell weight from total 5 g/L of mixed VFAs (acetic acid : propionic acid : butyric acid=1 : 2 : 2). In batch culture of R. eutropha KCTC2658 in a 5 L fermentor, a homopolymer of poly(3-hydroxybutyrate) [P(3HB)] was produced from 20 g/L glucose as a sole carbon source with dry cell weight of 8.4 g/L and PHA content of 30%. In fed-batch culture, two feeding strategies, pulse or pH-stat, were applied to add VFAs to the fermentor. When VFAs were fed using pH-stat feeding strategy after 40 h, a copolymer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] was produced with dry cell weight of 8.1 g/L, PHA content of 50%, and 3HV fraction of 20 mol%.

  2. Characterization of volatile sulphur compounds production at individual gingival crevicular sites in humans.

    Science.gov (United States)

    Coli, J M; Tonzetich, J

    1992-01-01

    The present investigation describes a method for collection and analysis of volatile sulphur compounds (VSC) from gingival crevicular sites in humans. Tenax-GC trapping devices were used to adsorb and concentrate VSC from crevicular air at -55 degrees C, which were then thermally desorbed at 120 degrees C. Gas chromatographic (GC) analyses were performed using a Tracor 550 GC equipped with a flame-photometric detector and a Teflon column packed with 5% polyphenyl ether and 0.05% phosphoric acid on 30-40 mesh Teflon. Sulfides identified from crevicular sites include hydrogen sulfide [H2S], methyl mercaptan [CH3SH], dimethyl sulfide [(CH3)2S], and dimethyl disulfide [(CH3S)2]. Of the seventeen patients studied, crevicular sites that were either deep (P.D. > or = 4 mm) or inflamed (BoP = 1) exhibited significantly larger CH3SH to H2S ratios than corresponding crevicular shallow (P.D. < or = 3 mm) sites (p < .10) or noninflamed (BoP = 0) sites (p < .05). Similarly, total sulphur in deep and inflamed sites was significantly higher than in corresponding shallow (p < .01) and noninflamed (p < .05) sites. This is the first known in vivo study to quantitate VSC directly from individual gingival crevices.

  3. Determination of polycyclic aromatic hydrocarbons [PAHs] in processed meat products using gas chromatography - flame ionization detector.

    Science.gov (United States)

    Olatunji, Olatunde S; Fatoki, Olalekan S; Opeolu, Beatrice O; Ximba, Bhekumusa J

    2014-08-01

    The concentrations of polycyclic aromatic hydrocarbons (PAHs) in smoked, grilled and boiled meats were determined using gas chromatography - flame ionization detector (GC-FID). PAHs in the processed meats were extracted in n-hexane after hydrolysis with methanolic KOH. Clean-up was achieved using solid phase extraction in neutral-Si/basic-Si/acidic-Si/neutral-Si frits. The fractions, benzo[k]fluoranthene (BkP), benzo[a]pyrene (BaP), indeno[123-cd]pyrene (IP) and benzo[ghi]perylene (BghiP) were separated and quantified using GC-FID. The method and instrument limits of detections were 0.1, 0.1, 0.2, 0.3μg/kg and 0.5, 0.5, 1.0, 1.5μg/kg, respectively, for BkP, BaP, IP and BghiP. The method's recovery and precision generally varied between 83.69% and 94.25% with relative standard deviation (RSD) of 3.18-15.60%; and 90.38-96.71% with relative standard deviation (RSD) of 1.82-12.87% respectively. The concentration of BkP, BaP, IP and BghiP in smoked, grilled and boiled meat samples were ranged 0.64-31.54μg/kg, 0.07-7.04μg/kg, 0.09-15.03, 0.51-46.67μg/kg and 0.01-5.11μg/kg, respectively. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Comparative study of the biochemical changes and volatile compound formations during the production of novel whey-based kefir beverages and traditional milk kefir

    OpenAIRE

    Magalhães, Karina Teixeira; Dragone,Giuliano; Pereira, Gilberto V. de Melo; Oliveira, J. M.; Domingues, Lucília; J. A. Teixeira; Silva, João B. Almeida e; Schwan, Rosane F.

    2011-01-01

    Cheese whey (CW) and deproteinised cheese whey (DCW) were investigated for their suitability as novel substrates for the production of kefir-like beverages. Lactose consumption, ethanol production, as well as organic acids and volatile compounds formation, were determined during CW and DCW fermentation by kefir grains and compared with values obtained during the production of traditional milk kefir. The results showed that kefir grains were able to utilise lactose from CW and DCW and produce ...

  5. Volatile Composition and Enantioselective Analysis of Chiral Terpenoids of Nine Fruit and Vegetable Fibres Resulting from Juice Industry By-Products

    Directory of Open Access Journals (Sweden)

    Alexis Marsol-Vall

    2017-01-01

    Full Text Available Fruit and vegetable fibres resulting as by-products of the fruit juice industry have won popularity because they can be valorised as food ingredients. In this regard, bioactive compounds have already been studied but little attention has been paid to their remaining volatiles. Considering all the samples, 57 volatiles were identified. Composition greatly differed between citrus and noncitrus fibres. The former presented over 90% of terpenoids, with limonene being the most abundant and ranging from 52.7% in lemon to 94.0% in tangerine flesh. Noncitrus fibres showed more variable compositions, with the predominant classes being aldehydes in apple (57.5% and peach (69.7%, esters (54.0% in pear, and terpenoids (35.3% in carrot fibres. In addition, enantioselective analysis of some of the chiral terpenoids present in the fibre revealed that the enantiomeric ratio for selected compounds was similar to the corresponding volatile composition of raw fruits and vegetables and some derivatives, with the exception of terpinen-4-ol and α-terpineol, which showed variation, probably due to the drying process. The processing to which fruit residues were submitted produced fibres with low volatile content for noncitrus products. Otherwise, citrus fibres analysed still presented a high volatile composition when compared with noncitrus ones.

  6. Polycyclic Aromatic Hydrocarbons (PAH) in Danish Smoked Fish and Meat Products

    DEFF Research Database (Denmark)

    Duedahl-Olesen, Lene; White, S.; Binderup, Mona-Lise

    2006-01-01

    Twenty seven PAH were detected in 45 selected smoked food samples produced in Denmark, including mackerel, herring, trout, small sausages, salami, and bacon. The sum of PAH in smoked meat products ranged from 24 mu g/kg for salami to 64 mu g/kg in bacon, while those in fish products ranged from 2...

  7. Continuous volatile fatty acid production from lignocellulosic biomass by a novel rumen-mimetic bioprocess.

    Science.gov (United States)

    Agematu, Hitosi; Takahashi, Takehiko; Hamano, Yoshio

    2017-11-01

    Lignocellulosic biomass is an attractive source of biofuels and biochemicals, being abundant in various plant sources. However, processing this type of biomass requires hydrolysis of cellulose. The proposed rumen-mimetic bioprocess consists of dry-pulverization of lignocellulosic biomass and pH-controlled continuous cultivation of ruminal bacteria using ammonium as a nitrogen source. In this study, ruminal bacteria were continuously cultivated for over 60 days and used to digest microcrystalline cellulose, rice straw, and Japanese cedar to produce volatile fatty acids (VFAs). The ruminal bacteria grew well in the chemically defined medium. The amounts of VFAs produced from 20 g of cellulose, rice straw, and Japanese cedar were 183 ± 29.7, 69.6 ± 12.2, and 21.8 ± 12.9 mmol, respectively. Each digestion completed within 24 h. The carbon yield was 60.6% when 180 mmol of VFAs was produced from 20 g of cellulose. During the cultivation, the bacteria were observed to form flocs that enfolded the feed particles. These flocs likely contain all of the bacterial species necessary to convert lignocellulosic biomass to VFAs and microbial protein symbiotically. Denaturing gradient gel electrophoresis (DGGE) analysis of PCR-amplified 16S rDNA fragments revealed that the bacterial community was relatively stable after 1 week in cultivation, though it was different from the original community structure. Furthermore, sequence analysis of the DGGE bands indicates that the microbial community includes a cellulolytic bacterium, a bacterium acting synergistically with cellulolytic bacteria, and a propionate-producing bacterium, as well as other anaerobic bacteria. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  8. Hydrocarbon generation by thermal alteration of kerogen from different sediments

    Energy Technology Data Exchange (ETDEWEB)

    Ishiwatari, R.; Rohrback, B.G.; Kaplan, I.R.

    1978-04-01

    Kerogen samples from three recent sediments (Tanner basin, Santa Barbara basin, and Banderas Bay) were heated for 24 hours at temperatures ranging from 150 to 410/sup 0/C. The volatile, liquid, and solid residue products of thermal alteration were then analyzed. A comparison of the hydrocarbon generating potential indicates greatest liquid product yields from the predominantly marine source organic material of Tanner basin and the smallest yields from the terrestrially originating source material of Banderas Bay. The nature of the chemical changes described (atomic ratios of H/C and N/C, electron spin resonance data, volatiles lost, n-alkanes generated, and odd-even preference ratio) may be useful in constructing source and maturation histories.

  9. Health evaluation of volatile organic compound (VOC) emission from exotic wood products

    DEFF Research Database (Denmark)

    Kirkeskov, L; Witterseh, T; Funch, L W

    2009-01-01

    The purpose of this study was to measure and evaluate the impact of the emissions of selected products of exotic wood on health. Ten products were screened for chemical compounds, and five of the most used products which emitted more than 800 microg/kg were selected for further quantitative......) (rubber tree). The toxicological effects of all substances identified were evaluated and the lowest concentrations of interest (LCI) assessed. An R-value was calculated for each wood product (R-value below 1 is considered to be unproblematic as regards health). Emission from the evaluated exotic wood only...... evaluated toxicologically. Emission from the evaluated exotic wood was very limited. None of the products is likely, under our exposure conditions, to cause health problems in relation to indoor air....

  10. Development of a submerged anaerobic membrane bioreactor for concurrent extraction of volatile fatty acids and biohydrogen production.

    Science.gov (United States)

    Trad, Zaineb; Akimbomi, Julius; Vial, Christophe; Larroche, Christian; Taherzadeh, Mohammad J; Fontaine, Jean-Pierre

    2015-11-01

    The aim of this work was to study an externally-submerged membrane bioreactor for the cyclic extraction of volatile fatty acids (VFAs) during anaerobic fermentation, combining the advantages of submerged and external technologies for enhancing biohydrogen (BioH2) production from agrowaste. Mixing and transmembrane pressure (TMP) across a hollow fiber membrane placed in a recirculation loop coupled to a stirred tank were investigated, so that the loop did not significantly modify the hydrodynamic properties in the tank. The fouling mechanism, due to cake layer formation, was reversible. A cleaning procedure based on gas scouring and backwashing with the substrate was defined. Low TMP, 10(4)Pa, was required to achieve a 3Lh(-1)m(-2) critical flux. During fermentation, BioH2 production was shown to restart after removing VFAs with the permeate, so as to enhance simultaneously BioH2 production and the recovery of VFAs as platform molecules. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Feed-derived volatile basic nitrogen increases reactive oxygen species production of blood leukocytes in lactating dairy cows.

    Science.gov (United States)

    Tsunoda, Ei; Gross, Josef J; Kawashima, Chiho; Bruckmaier, Rupert M; Kida, Katsuya; Miyamoto, Akio

    2017-01-01

    The present study investigated over 9 months the changes of fermentative quality of total mixed rations (TMR) containing grass silage (GS) as a major component, associated with changes in the volatile basic nitrogen (VBN) levels in an experimental dairy farm. Effects of VBN levels in TMR on metabolic parameters, reactive oxygen species (ROS) production by blood polymorphonuclear leukocytes (PMNs) and conception rates for dairy cows were analyzed. According to VBN levels in TMR during survey periods, three distinct phases were identified; phase A with low VBN; phase B with high VBN; and phase C with mid-VBN. Metabolic parameters in blood were all within normal range. However, during phases B and C, nitrogen metabolic indices such as blood urea nitrogen and milk urea nitrogen showed higher levels compared to those in phase A, and a simultaneous increase in ROS production by blood PMNs and the load on hepatic function in metabolic parameters was observed in the cows with a lower conception rate. This suggests that feeding TMR with elevated VBN levels due to poor fermented GS results in stimulation of ROS production by PMNs by ammonia, and negatively affects metabolism and reproductive performance in lactating dairy cow. © 2016 Japanese Society of Animal Science.

  12. Concentrations of cyclic volatile methylsiloxanes in European cosmetics and personal care products: prerequisite for human and environmental exposure assessment.

    Science.gov (United States)

    Dudzina, Tatsiana; von Goetz, Natalie; Bogdal, Christian; Biesterbos, Jacqueline W H; Hungerbühler, Konrad

    2014-01-01

    Low molecular weight cyclic volatile methylsiloxanes (cVMSs) are widely employed as emollients and carrier solvents in personal care formulations in order to acquire desired performance benefits owing to their distinctive physicochemical properties. Under current European legislation cosmetic ingredients such as cVMSs are required to be labeled on the product package only qualitatively, while for the assessment of environmental and consumer exposure quantitative information is needed. The aim of this study was therefore to measure concentrations of three cVMSs, namely octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) in 51 cosmetics and personal care products (C&PCPs) that are currently available on the European market. The list of selected articles comprised a variety of hair and sun care products, skin creams and lotions, deodorants including antiperspirants, liquid foundations and a toothpaste. The target compounds were extracted from the products with different organic solvents dependent on the product matrix, followed by gas chromatography analysis with flame ionization detection (GC-FID). D5 was the predominant cVMS with the highest mean and median concentrations in all the C&PCP categories. The median concentrations of D5, D6 and D4 were 142, 2.3 and 0.053 mg/g in deodorants/antiperspirants (n = 11); 44.6, 30.0mg/g and below the limit of quantification (cosmetics (n = 5); 8.4, 0.32 mg/g and products, respectively. The calculated median aggregate daily dermal exposure to D4 and D5 from multiple C&PCPs was approximately 100 times lower than the current NOAEL derived from chronic inhalation rat studies. © 2013.

  13. Hydrogen production by reforming of liquid hydrocarbons in a membrane reactor for portable power generation-Model simulations

    Science.gov (United States)

    Damle, Ashok S.

    One of the most promising technologies for lightweight, compact, portable power generation is proton exchange membrane (PEM) fuel cells. PEM fuel cells, however, require a source of pure hydrogen. Steam reforming of hydrocarbons in an integrated membrane reactor has potential to provide pure hydrogen in a compact system. In a membrane reactor process, the thermal energy needed for the endothermic hydrocarbon reforming may be provided by combustion of the membrane reject gas. The energy efficiency of the overall hydrogen generation is maximized by controlling the hydrogen product yield such that the heat value of the membrane reject gas is sufficient to provide all of the heat necessary for the integrated process. Optimization of the system temperature, pressure and operating parameters such as net hydrogen recovery is necessary to realize an efficient integrated membrane reformer suitable for compact portable hydrogen generation. This paper presents results of theoretical model simulations of the integrated membrane reformer concept elucidating the effect of operating parameters on the extent of fuel conversion to hydrogen and hydrogen product yield. Model simulations indicate that the net possible hydrogen product yield is strongly influenced by the efficiency of heat recovery from the combustion of membrane reject gas and from the hot exhaust gases. When butane is used as a fuel, a net hydrogen recovery of 68% of that stoichiometrically possible may be achieved with membrane reformer operation at 600 °C (873 K) temperature and 100 psig (0.791 MPa) pressure provided 90% of available combustion and exhaust gas heat is recovered. Operation at a greater pressure or temperature provides a marginal improvement in the performance whereas operation at a significantly lower temperature or pressure will not be able to achieve the optimal hydrogen yield. Slightly higher, up to 76%, net hydrogen recovery is possible when methanol is used as a fuel due to the lower heat

  14. Analysis by gas liquid chromatography of production of volatile fatty acids by anaerobic bacteria grown on solid medium.

    OpenAIRE

    Wiggins, R J; Wilks, M.; Tabaqchali, S

    1985-01-01

    Volatile fatty acids produced in Robertson's cooked meat medium by a range of clinically relevant anaerobes were compared by gas liquid chromatography with those produced in blood agar. The same volatile fatty acid profiles were obtained in both media, although the concentration of acids was lower in blood agar. We conclude that detection of volatile fatty acids from a pure culture of an organism on solid medium is practicable and offers advantages over the conventional technique.

  15. Investigation of sorbic acid volatile degradation products in pharmaceutical formulations using static headspace gas chromatography.

    Science.gov (United States)

    Yarramraju, Sitaramaraju; Akurathi, Vamsidhar; Wolfs, Kris; Van Schepdael, Ann; Hoogmartens, Jos; Adams, Erwin

    2007-06-28

    An analytical method that allows simultaneous analysis of sorbic acid and its degradation products was developed using static headspace gas chromatography (HS-GC). AT-Aquawax-DA, the capillary column used, showed good selectivity and separation towards sorbic acid and its degradation products. Sorbic acid degradation was investigated in both acidic and aqueous media at room and elevated temperatures. In total 12 sorbic acid degradation products were found, 8 of which could be characterized. The method was investigated for its accuracy towards estimation of degradation products. Using the HS-GC method different batches of pharmaceutical preparations such as cold cream, cetomacrogol cream and vaseline were investigated for sorbic acid degradation products which were estimated by applying the standard addition method. Acetaldehyde was found to be the major degradation product. The other identified degradation products were: acetone; 2-methylfuran; crotonaldehyde; alfa-angelicalactone; 2-acetyl, 5-methylfuran; toluene and 2,5-dimethylfuran. Both mass spectrometeric (MS) and flame ionization detection (FID) were used. The qualitative investigation was done on HS-GC-MS and the quantitative work on HS-GC-FID.

  16. Influence of maturity of grass silage and flaked corn starch on the production and metabolism of volatile fatty acids in dairy cows

    NARCIS (Netherlands)

    Visser, de H.; Klop, A.; Meulen, van der J.; Vuuren, van A.M.

    1998-01-01

    An experiment employing a Latin square design was used to quantify the effects of two stages of maturity of grass silage (early cut and late cut) and three concentrations of flaked corn starch (0, 2, and 4 kg) on the molar proportion of rumen volatile fatty acids (VFA), the production of rumen VFA,

  17. Enteric methane production, rumen volatile fatty acid concentrations, and milk fatty acid composition in lactating Holstein-Friesian cows fed grass silage - or corn silage-based diets

    NARCIS (Netherlands)

    Gastelen, van S.; Antunes Fernandes, E.C.; Hettinga, K.A.; Klop, G.; Alferink, S.J.J.; Hendriks, W.H.; Dijkstra, J.

    2015-01-01

    The objective of this study was to determine the effects of replacing grass silage (GS) with corn silage (CS) in dairy cow diets on enteric methane (CH4) production, rumen volatile fatty acid (FA) concentrations, and milk FA composition. A completely randomized block design experiment was conducted

  18. Method of carbon dioxide-free hydrogen production from hydrocarbon decomposition over metal salts

    Energy Technology Data Exchange (ETDEWEB)

    Erlebacher, Jonah; Gaskey, Bernard

    2017-10-03

    A process to decompose methane into carbon (graphitic powder) and hydrogen (H.sub.2 gas) without secondary production of carbon dioxide, employing a cycle in which a secondary chemical is recycled and reused, is disclosed.

  19. Metabolic activation of volatile organic compounds and polycyclic aromatic hydrocarbons coated onto airborne PM{sub 2.5} in isolated human alveolar macrophages; Etude de l'activation metabolique des composes organiques volatils et des hydrocarbures aromatiques polycycliques d'un aerosol anthropogenique par des macrophages alveolaires humains en culture primaire

    Energy Technology Data Exchange (ETDEWEB)

    Saint-Georges, F.; Mulliez, P. [Hopital Saint Philibert - GHICL-FLM, Service de Pneumologie, 59 - Lomme (France); Saint-Georges, F.; Abbas, I.; Garcon, G.; Billet, S.; Verdin, A.; Shirali, P. [LCE-EA2598, Lab. de Recherche en toxicologie Industrielle et Environnementale - ULCO-MREI, 59 - Dunkerque (France); Gosset, P. [Hopital Saint Vincent, Laboratoire d' Anatomie et de Cytologie Pathologiques - GHICL-FLM, 59 - Lille (France); Courcot, D. [LCE-EA2598, Lab. de Catalyse et Environnement - ULCO-MREI, 59 - Dunkerque (France)

    2009-01-15

    To contribute to improve the knowledge of the underlying mechanisms of action involved in air pollution Particulate Matter (PM)-induced cytotoxicity, we were interested in the metabolic activation of Volatile Organic Compounds (VOC) and/or Polycyclic Aromatic Hydrocarbons (PAH)-coated onto Dunkerque City's PM{sub 2.5} in human Alveolar Macrophages (AM) isolated from Bronchoalveolar Lavage Fluid (BALF). This in vitro cell lung model is very close to the normal in vivo situation, notably in the characteristics that AM display in terms of gene expression of phase I and phase II-metabolizing enzymes. The bronchoscopic examinations and BAL procedures were carried out without any complications. The exposure of AM, during 24, 48 or 72 h, to increasing concentrations of the collected aerosol induced significant variations of the activities of the extracellular lactate dehydrogenase and the mitochondrial dehydrogenase. The lethal concentrations at 10% and 50% were 14.93 and 74.63 {mu}g/mL for AM, respectively, and indicated the relatively higher sensibility of such target lung cells. VOC and/or PAH-coated at low levels onto the surface of the particulate fraction significantly induced gene expression of cytochrome P450 (GYP) 1A1, CYP2E1, NADPH Quinone oxido-reductase (NQO)-1) and Glutathione S-Transferase (GST)P1 and M3, versus controls, suggesting thereby the formation of biologically reactive metabolites. Moreover, these results suggested the role of physical vector of carbonaceous core of PM, which can, therefore, increase both the penetration and the retention of attached-VOC into the cells, thereby enabling them to exert a more durable induction. Hence, we concluded that the metabolic activation of the very low doses of VOC and/or PAH-coated onto Dunkerque City's PM{sub 2.5} is one of the underlying mechanisms of action closely involved in its cytotoxicity in isolated human AM in culture. (author)

  20. Approach of describing dynamic production of volatile fatty acids from sludge alkaline fermentation.

    Science.gov (United States)

    Wang, Dongbo; Liu, Yiwen; Ngo, Huu Hao; Zhang, Chang; Yang, Qi; Peng, Lai; He, Dandan; Zeng, Guangming; Li, Xiaoming; Ni, Bing-Jie

    2017-08-01

    In this work, a mathematical model was developed to describe the dynamics of fermentation products in sludge alkaline fermentation systems for the first time. In this model, the impacts of alkaline fermentation on sludge disintegration, hydrolysis, acidogenesis, acetogenesis, and methanogenesis processes are specifically considered for describing the high-level formation of fermentation products. The model proposed successfully reproduced the experimental data obtained from five independent sludge alkaline fermentation studies. The modeling results showed that alkaline fermentation largely facilitated the disintegration, acidogenesis, and acetogenesis processes and severely inhibited methanogenesis process. With the pH increase from 7.0 to 10.0, the disintegration, acidogenesis, and acetogenesis processes respectively increased by 53%, 1030%, and 30% while methane production decreased by 3800%. However, no substantial effect on hydrolysis process was found. The model also indicated that the pathway of acetoclastic methanogenesis was more severely inhibited by alkaline condition than that of hydrogentrophic methanogenesis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Improvement of acidogenic fermentation for volatile fatty acid production from protein-rich substrate in food waste.

    Science.gov (United States)

    Yu, Xiaoqin; Yin, Jun; Shen, Dongsheng; Shentu, Jiali; Long, Yuyang; Chen, Ting

    2017-12-02

    Based on our previous study, the low volatile fatty acid (VFA) production from egg white in food waste was mainly attributed to more acidogenic substrates (proteins and amino acids) consumed in the Maillard reaction and more organics converted into lactic acid. In this study, two methods were employed to improve VFA production: (1) reducing Maillard reaction with a drop in pH during hydrothermal (HT) pretreatment, and (2) inhibiting the conversion from protein to lactic acid. HT pretreatment under weakly acidic condition significantly promoted the hydrolysis and degradation of protein and the hydrolytic enzyme (protease) activity, thus increasing VFA yield by 45.8% from 0.24 to 0.35 g/g protein for HT pretreated egg white. Addition of sodium oxamate increased the maximal VFA yield from 0.24 to 0.29 g/g protein for HT pretreated egg white and from 0.32 to 0.67 g/g protein for egg white with no pretreatment in which there was more protein converted through the lactic acid metabolism pathway. Sodium oxamate improved the acidification step by inhibiting the reaction from pyruvates to lactic acid, and thereby accelerating the process of conversion from pyruvates to VFA. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Simulation Analysis of Sludge Disposal and Volatile Fatty Acids Production from Gravity Pressure Reactor via Wet Air Oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Park, Gwon Woo [Biomass and Waste Energy Laboratory, KIER, Daejeon (Korea, Republic of); Seo, Tae Wan; Lee, Hong-Cheol; Hwang, In-Ju [Environmental and Plant Engineering Research Institute, KICT, Goyang (Korea, Republic of)

    2016-04-15

    Efficacious wastewater treatment is essential for increasing sewage sludge volume and implementing strict environmental regulations. The operation cost of sludge treatment amounts up to 50% of the total costs for wastewater treatment plants, therefore, an economical sludge destruction method is crucially needed. Amid several destruction methods, wet air oxidation (WAO) can efficiently treat wastewater containing organic pollutants. It can be used not only for sludge destruction but also for useful by-product production. Volatile fatty acids (VFAs), one of many byproducts, is considered to be an important precursor of biofuel and chemical materials. Its high reaction condition has instituted the study of gravity pressure reactor (GPR) for an economical process of WAO to reduce operation cost. Simulation of subcritical condition was conducted using Aspen Plus with predictive Soave-Redlich-Kwong (PSRK) equation of state. Conjointly, simulation analysis for GPR depth, oxidizer type, sludge flow rate and oxidizer injection position was carried out. At GPR depth of 1000m and flow rate of 2 ton/h, the conversion and yield of VFAs were 92.02% and 0.17g/g, respectively.

  3. Studies concerning the production of volatile oil, rhizomes and roots, to different genotypes of Valeriana officinalis L.

    Directory of Open Access Journals (Sweden)

    Mihai Radu POP

    2010-11-01

    Full Text Available Valeriana officinalis L. is considered to pertain to European species, with great ecologic plasticity, which allows its adaptation to climate conditions characteristics to plain areas and also to mountain areas up to an altitude of 2400 meters. The species is a well-known curative plant, with a long history and multiple uses. Essential oils deriving from this species revealed the interest of researchers in food industry, cosmetics and officinal industry, furthermore being used as additives too.The raw material from which essential oils are being extracted is represented mainly by rhizomes and roots. This study has the purpose to emphasize the differences of essential oils production registered based upon the genotypes diversity. Thus, 11 experimental variants have been used, with biologic material of different origin, from Romania, Poland, Germany and Russia; they have been measured in relation to their production of rhizomes, roots and volatile oil, in the ecological conditions of Brasov, Romania.The results proved the superiority of the variants was used Romanian variety M-100, but have also revealed a negative correlation between capacity and essential oil biosynthesis.

  4. Significance of the carbonization of volatile pyrolytic products on the properties of activated carbons from phosphoric acid activation of lignocellulosic material

    Energy Technology Data Exchange (ETDEWEB)

    Zuo, Songlin; Yang, Jianxiao; Cai, Xuan [Faculty of Chemical Engineering, Nanjing Forestry University, Nanjing 210037 (China); Liu, Junli [Institute of Chemical Industry of Forest Products, CAF, Nanjing 210042 (China)

    2009-07-15

    Two series of activated carbons derived from China fir (Cunninghamia lanceolata) wood impregnated with phosphoric acid were prepared in a cylindrical container that was kept in a closed state covered with a lid (the covered case) or in an open state. The effects of the carbonization of volatile pyrolytic products of starting materials on the properties of activated carbon were investigated in the process of phosphoric acid activation. Elemental analysis and SEM observation showed that both activating in the covered case and increasing the mass of starting material used favored the carbonization of volatile pyrolytic products. An investigation of N{sub 2} adsorption isotherms revealed that the carbonization of volatile pyrolytic products significantly enhanced mesopore development in the final carbons, especially pores with a size range from 2.5 to 30 nm, with little influence on micropores, and therefore produced a large increase in the adsorption capacity to Vitamin B12 (with a molecular size of 2.09 nm). Activated carbons with highly developed mesopores could be obtained in the covered case. The carbonization mechanism of volatiles was discussed and two different carbonization pathways (in solid and gas phases) were proposed during phosphoric acid activation. (author)

  5. Biocontrol Activity of Volatile-Producing Bacillus megaterium and Pseudomonas protegens against Aspergillus flavus and Aflatoxin Production on Stored Rice Grains

    Science.gov (United States)

    Mannaa, Mohamed; Oh, Ji Yeon

    2017-01-01

    In our previous study, three bacterial strains, Bacillus megaterium KU143, Microbacterium testaceum KU313, and Pseudomonas protegens AS15, were selected as effective biocontrol agents against Aspergillus flavus on stored rice grains. In this study, we evaluated the inhibitory effects of the volatiles produced by the strains on A. flavus growth and aflatoxin production on stored rice grains. The three strains significantly reduced mycelial growth of A. flavus in dual-culture assays compared with the negative control strain, Sphingomonas aquatilis KU408, and an untreated control. Of these tested strains, volatiles produced by B. megaterium KU143 and P. protegens AS15 markedly inhibited mycelial growth, sporulation, and conidial germination of A. flavus on agar medium and suppressed the fungal populations in rice grains. Moreover, volatiles produced by these two strains significantly reduced aflatoxin production in the rice grains by A. flavus. To our knowledge, this is the first report of the suppression of A. flavus aflatoxin production in rice grains using B. megaterium and P. protegens volatiles. PMID:29138628

  6. Degradation products of citrus volatile organic compounds (VOCs) acting as phagostimulants that increase probing behavior of Asian citrus psyllid

    Science.gov (United States)

    Volatile phytochemicals play a role in orientation by phytophagous insects. We studied antennal and behavioral responses of the Asian citrus psyllid, Diaphorina citri Kuwayama, vector of the citrus greening disease pathogen. Little or no response to citrus leaf volatiles was detected by electroanten...

  7. Characterization of biosynthetic pathways for the production of the volatile homoterpenes DMNT and TMTT in Zea mays

    Science.gov (United States)

    Plant volatiles not only have multiple defense functions against herbivores, fungi, and bacteria, but also have been implicated in signaling within the plant and toward other organisms. Elucidating the function of individual plant volatiles will require more knowledge of their biosynthesis and regul...

  8. Concentrations of volatile 4-alkyl-branched fatty acids in sheep and goat milk and dairy products.

    Science.gov (United States)

    Kaffarnik, Stefanie; Kayademir, Yasemin; Heid, Carolina; Vetter, Walter

    2014-11-01

    Goat and sheep milk and dairy products thereof are characterized by a strong and unique flavor. In this context, the volatile minor fatty acid 4-ethyloctanoic acid plays a prominent role along with 4-methyloctanoic acid when both are present in free form. Using a novel GC/MS method in the selected ion-monitoring mode, previously developed for sheep subcutaneous adipose tissue, we were able to analyze the total concentrations of these flavor-relevant minor fatty acids as methyl esters in goat and sheep milk as well as in their products. Differences between the concentrations and ratios of 4-methyloctanoic acid and 4-ethyloctanoic acid in goat milk (n = 4), goat cheese (n = 4), sheep milk (n = 2), and sheep cheese (n = 4) were observed. Goat milk and cheese resulted in higher concentrations for both fatty acids (190 to 480 μg/g milk fat) and smaller 4-Me-8:0 to 4-Et-8:0 ratios (1.4 to 2.7) compared to sheep milk and cheese (78 to 220 μg/g milk fat; 4-Me-8:0 to 4-Et-8:0 ratio: 15 to 42). In all samples, the concentration of 4-Me-8:0 exceeded the one of 4-Et-8:0. However, due to its lower flavor threshold value the contribution of 4-Et-8:0 to the flavor was generally >76%. The calculated flavor values were >1400 for goat milk and cheeses and >200 for sheep milk and cheeses. In goat milk and its products, only a proportion of milk and sheep samples would be sufficient to generate the characteristic goaty flavor. Parameters that promote or prevent the release of 4-Me-8:0, and especially 4-Et-8:0, will be decisive for the flavor in the resulting dairy product. © 2014 Institute of Food Technologists®

  9. “Gold” Pressed Essential Oil: An Essay on the Volatile Fragment from Citrus Juice Industry By-Products Chemistry and Bioactivity

    OpenAIRE

    V. N. Kapsaski-Kanelli; E. Evergetis; A. Michaelakis; D. P. Papachristos; E. D. Myrtsi; S. D. Koulocheri; Haroutounian, S. A.

    2017-01-01

    Present essay explores the potentials of Citrus juice industry’s by-products as alternative bioactive natural products resources. Four crude Cold Pressed Essential Oils (CPEOs), derived from orange, lemon, grapefruit, and mandarin, were studied. All CPEOs were subjected to water distillation, in order to obtain the volatile fragment, which was further fractionated with respect to distillation period in two parts, concluding to eight samples. These samples along with the four original CPEOs we...

  10. Evidence for in situ production of chlorinated polycyclic aromatic hydrocarbons on tidal flats: environmental monitoring and laboratory scale experiment.

    Science.gov (United States)

    Sankoda, Kenshi; Nomiyama, Kei; Yonehara, Takayuki; Kuribayashi, Tomonori; Shinohara, Ryota

    2012-07-01

    This study investigated environmental distributions and production mechanisms of chlorinated polycyclic aromatic hydrocarbons (Cl-PAHs) in the sediments from some tidal flats located in Asia. Cl-PAHs were found in sediments taken from Arao tidal flat, Kikuchigawa River and Shirakawa River. The range of ∑Cl-PAHs was from 25.5 to 483 pg g(-1) for Kikuchigawa River and Arao tidal flat, respectively. Concentrations of PAHs and Cl-PAHs showed no significant correlations (r=0.134). This result suggests that the origins of these compounds differ. In the identified Cl-PAH isomers, the most abundant Cl-PAH isomer was 9,10-dichloroanthracene (9,10-di-Cl-ANT) in the three sites. In general, concentrations of Cl-ANTs in the coastal environment are about 3-5 orders of magnitude lower than those of anthracene (ANT). However, concentration ratios between Cl-ANTs and ANT (Cl-ANTs/ANT) in the sediments ranged from 4.1% to 24.6%. This result indicated that Cl-PAHs were not generated under industrial processes but the high concentration ratios have resulted from the contribution of photochemical production of Cl-ANTs in the sediments because ANT is known to have high photochemical reactivity. For examining this phenomenon, ANT adsorbed onto glass beads was irradiated with UV under the mimicked field conditions of tidal flats. As a result, it was noticed that, while chlorinated derivatives were negligible in a light-controlled group, production of 2-Cl-ANT, 9-Cl-ANT and 9,10-diCl-ANT on the irradiated surface were found in this study. These results suggest that photochemical reaction of PAHs can be a potential source of the occurrence of Cl-PAHs in the coastal environment. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Identification of polar transformation products and high molecular weight polycyclic aromatic hydrocarbons (PAHs) in contaminated soil following bioremediation.

    Science.gov (United States)

    Chibwe, Leah; Davie-Martin, Cleo L; Aitken, Michael D; Hoh, Eunha; Massey Simonich, Staci L

    2017-12-01

    Bioremediation is a technique commonly used to reduce the toxicity associated with polycyclic aromatic hydrocarbons (PAHs) in contaminated soils. However, the efficacy of bioremedial applications is evaluated based on the removal of a subset of parent (or unsubstituted) PAHs and does not incorporate toxic polar transformation products or the more mutagenic high molecular weight PAHs (MW≥302amu or MW302-PAHs). Previously, an effects-directed analysis approach was used to assess the effect of bioremediation on the toxicity of a coal tar-contaminated soil. Increased genotoxicity and developmental toxicity was measured postbioremedation in the more polar soil extract fractions, as compared to the less polar fractions where the targeted PAHs eluted, and could not be attributed to the 88 target PAHs analyzed for (including selected oxygen-containing PAHs). In this study, comprehensive two-dimensional gas chromatography time-of-flight and liquid chromatography quadrupole time-of-flight mass spectrometry were used to characterize transformation products in the soil extract fractions identified as toxic, previously. Additionally, the degradation of 12MW302-PAHs, picene (MW=278) and coronene (MW=300) were evaluated following bioremediation. Non-targeted analysis resulted in the tentative identification of 10 peaks with increased intensity postbioremediation (based on mass spectral library matching and fragmentation patterns from >5000 candidate peaks in the soil extracts). Several of these compounds contained oxygen, suggesting they would be relatively polar. MW302-PAHs were not significantly degraded during bioremediation, suggesting that the carcinogenic potential associated with these PAHs might remain unchanged. The results of this study suggest that polar transformation products, and MW302-PAHs, should be considered for realistic risk assessment of bioremediated soils. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Review of the quantification techniques for polycyclic aromatic hydrocarbons (PAHs) in food products.

    Science.gov (United States)

    Bansal, Vasudha; Kumar, Pawan; Kwon, Eilhann E; Kim, Ki-Hyun

    2017-10-13

    There is a growing need for accurate detection of trace-level PAHs in food products due to the numerous detrimental effects caused by their contamination (e.g., toxicity, carcinogenicity, and teratogenicity). This review aims to discuss the up-to-date knowledge on the measurement techniques available for PAHs contained in food or its related products. This article aims to provide a comprehensive outline on the measurement techniques of PAHs in food to help reduce their deleterious impacts on human health based on the accurate quantification. The main part of this review is dedicated to the opportunities and practical options for the treatment of various food samples and for accurate quantification of PAHs contained in those samples. Basic information regarding all available analytical measurement techniques for PAHs in food samples is also evaluated with respect to their performance in terms of quality assurance.

  13. Microwave Enhanced Direct Cracking of Hydrocarbon Feedstock for Energy Efficient Production of Ethylene and Propylene.

    Energy Technology Data Exchange (ETDEWEB)

    Shulman, Holly; Fall, Morgana; Wagner, Eric; Bowlin, Ricardo

    2012-02-13

    This project demonstrated microwave cracking of ethane with good product conversion and ethylene selectivity, with a short residence time ({approx}0.001 sec). The laboratory scale equipment was designed and built, along with concept designs for larger scale implementation. The system was operated below atmospheric pressures, in the range of 15-55 torr, with argon as a carrier gas. The measured products included hydrogen, methane, acetylene, and ethylene. The results followed similar trends to those predicted by the modeling software SPYRO{reg_sign}, with the exception that the microwave appeared to produce slightly lower amounts of ethylene and methane, although enhanced analytical analysis should reduce the difference. Continued testing will be required to verify these results and quantify the energy consumption of microwave vs. conventional. The microwave cracking process is an attractive option due to the possibility of selectively heating the reaction volume rather than the reactor walls, which may allow novel reactor designs that result in more efficient production of ethylene. Supplemental studies are needed to continue the laboratory testing and refine processing parameters.

  14. Reduction in revenue volatility in maize production applying the indirect-index insurance

    OpenAIRE

    Markovic, Todor; Ivanović, Sanjin; Todorović, Saša

    2013-01-01

    This paper is aimed at providing the basic theoretical postulates of indirect-index insurance and by its application at quantifying the effect of the reduction in risk using a stochastic simulation. The paper uses data on maize yield gathered from family farm in the central part of Srem, and weather data were acquired from the nearest referential meteorological station. For the purpose of achieving a stated aim, two situations were analysed: maize production value by using the indirect-index ...

  15. Rate of hexabromocyclododecane decomposition and production of brominated polycyclic aromatic hydrocarbons during combustion in a pilot-scale incinerator.

    Science.gov (United States)

    Miyake, Yuichi; Tokumura, Masahiro; Wang, Qi; Amagai, Takashi; Horii, Yuichi

    2017-11-01

    Here, we examined the incineration of extruded polystyrene containing hexabromocyclododecane (HBCD) in a pilot-scale incinerator under various combustion temperatures (800-950°C) and flue gas residence times (2-8sec). Rates of HBCD decomposition ranged from 99.996% (800°C, 2sec) to 99.9999% (950°C, 8sec); the decomposition of HBCD, except during the initial stage of combustion (flue gas residence timecombustion were 14.2kJ/mol and 1.69sec-1, respectively. During combustion, 11 brominated polycyclic aromatic hydrocarbons (BrPAHs) were detected as unintentional by-products. Of the 11 BrPAHs detected, 2-bromoanthracene and 1-bromopyrene were detected at the highest concentrations. The mutagenic and carcinogenic BrPAHs 1,5-dibromoanthracene and 1-bromopyrene were most frequently detected in the flue gases analyzed. The total concentration of BrPAHs exponentially increased (range, 87.8-2,040,000ng/m3) with increasing flue gas residence time. Results from a qualitative analysis using gas chromatography/high-resolution mass spectrometry suggest that bromofluorene and bromopyrene (or fluoranthene) congeners were also produced during the combustion. Copyright © 2017. Published by Elsevier B.V.

  16. Dispersion modeling of polycyclic aromatic hydrocarbons from combustion of biomass and fossil fuels and production of coke in Tianjin, China.

    Science.gov (United States)

    Tao, Shu; Li, Xinrong; Yang, Yu; Coveney, Raymond M; Lu, Xiaoxia; Chen, Haitao; Shen, Weiran

    2006-08-01

    A USEPA, procedure, ISCLT3 (Industrial Source Complex Long-Term), was applied to model the spatial distribution of polycyclic aromatic hydrocarbons (PAHs) emitted from various sources including coal, petroleum, natural gas, and biomass into the atmosphere of Tianjin, China. Benzo[a]pyrene equivalent concentrations (BaPeq) were calculated for risk assessment. Model results were provisionally validated for concentrations and profiles based on the observed data at two monitoring stations. The dominant emission sources in the area were domestic coal combustion, coke production, and biomass burning. Mainly because of the difference in the emission heights, the contributions of various sources to the average concentrations at receptors differ from proportions emitted. The shares of domestic coal increased from approximately 43% at the sources to 56% at the receptors, while the contributions of coking industry decreased from approximately 23% at the sources to 7% at the receptors. The spatial distributions of gaseous and particulate PAHs were similar, with higher concentrations occurring within urban districts because of domestic coal combustion. With relatively smaller contributions, the other minor sources had limited influences on the overall spatial distribution. The calculated average BaPeq value in air was 2.54 +/- 2.87 ng/m3 on an annual basis. Although only 2.3% of the area in Tianjin exceeded the national standard of 10 ng/m3, 41% of the entire population lives within this area.

  17. NEW METHOD TO ESTIMATE POLLUTANTS BALANCE IN MARINE WATER AREA ALLOTTED FOR EXPLORATION AND PRODUCTION OF HYDROCARBONS

    Directory of Open Access Journals (Sweden)

    G. A. Monakhova

    2016-01-01

    Full Text Available Aim. Estimation of pollutants balance at the license area “Severniy” using the operational hydrodynamic model of the Caspian Sea and the data of industrial environmental monitoring.Methods. A new method was used to estimate pollutants balance at the license area based on the data of the hydrodynamic model and environmental monitoring. The indicated method was developed by Caspian Marine Scientific Research Center jointly with Hydrometeorological Centre of Russia in 2015.Results. The pollutants balance was estimated for oil products, heavy metals (copper, lead, cadmium, mercury, cobalt, iron, manganese, zinc and nickel and the total polycyclic aromatic hydrocarbons. It was discovered that from 17 to 20 October 2014 the balance of most pollutants was negative and amounted to less than 1% of the total transport. Pollutants outflow was registered 0-5 and 5-10 m layers, and the inflow was discovered in the layers of 10-15 and 15-20 m.Conclusion. The new approach based on the modified calculation technology of water exchange and pollutants transport has performed well and will make it possible to estimate the balance and flows of pollutants passing through different areas of the Caspian Sea.

  18. The Changing Landscape of Hydrocarbon Feedstocks for Chemical Production: Implications for Catalysis: Proceedings of a Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Bell, Alexis T. [Univ. of California, Berkeley, CA (United States); Alger, Monty M. [Pennsylvania State Univ., University Park, PA (United States); Flytzani-Stephanopoulos, Maria [Tufts Univ., Medford, MA (United States); Gunnoe, T. Brent [Univ. of Virginia, Charlottesville, VA (United States); Lercher, Johannes A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stevens, James [Dow Chemical Company, Torrance, CA (United States); Alper, Joe; Tran, Camly [National Academies of Sciences, Engineering, and Medicine, Washington, DC (United States)

    2016-11-14

    A decade ago, the U.S. chemical industry was in decline. Of the more than 40 chemical manufacturing plants being built worldwide in the mid-2000s with more than $1 billion in capitalization, none were under construction in the United States. Today, as a result of abundant domestic supplies of affordable natural gas and natural gas liquids resulting from the dramatic rise in shale gas production, the U.S. chemical industry has gone from the world’s highest-cost producer in 2005 to among the lowest-cost producers today. The low cost and increased supply of natural gas and natural gas liquids provides an opportunity to discover and develop new catalysts and processes to enable the direct conversion of natural gas and natural gas liquids into value-added chemicals with a lower carbon footprint. The economic implications of developing advanced technologies to utilize and process natural gas and natural gas liquids for chemical production could be significant, as commodity, intermediate, and fine chemicals represent a higher-economic-value use of shale gas compared with its use as a fuel. To better understand the opportunities for catalysis research in an era of shifting feedstocks for chemical production and to identify the gaps in the current research portfolio, the National Academies of Sciences, Engineering, and Medicine conducted an interactive, multidisciplinary workshop in March 2016. The goal of this workshop was to identify advances in catalysis that can enable the United States to fully realize the potential of the shale gas revolution for the U.S. chemical industry and, as a result, to help target the efforts of U.S. researchers and funding agencies on those areas of science and technology development that are most critical to achieving these advances. This publication summarizes the presentations and discussions from the workshop.

  19. Variation analysis of bacterial polyhydroxyalkanoates production using saturated and unsaturated hydrocarbons

    Directory of Open Access Journals (Sweden)

    Saiqa Tufail

    Full Text Available ABSTRACT Polyhydroxyalkanoates (PHA are efficient, renewable and environment friendly polymeric esters. These polymers are synthesized by a variety of microbes under stress conditions. This study was carried out to check the suitability of waste frying oil in comparison to other oils for economical bioplastic production. Six bacterial strains were isolated and identified as Bacillus cereus (KF270349, Klebsiella pneumoniae (KF270350, Bacillus subtilis (KF270351, Brevibacterium halotolerance (KF270352, Pseudomonas aeruginosa (KF270353, and Stenotrophomonas rhizoposid (KF270354 by ribotyping. All strains were PHA producers so were selected for PHA synthesis using four different carbon sources, i.e., waste frying oil, canola oil, diesel and glucose. Extraction of PHA was carried out using sodium hypochlorite method and maximum amount was detected after 72 h in all cases. P. aeruginosa led to maximum PHA production after 72 h at 37 °C and 100 rpm using waste frying oil that was 53.2% PHA in comparison with glucose 37.8% and cooking oil 34.4%. B. cereus produced 40% PHA using glucose as carbon source which was high when compared against other strains. A significantly lesser amount of PHA was recorded with diesel as a carbon source for all strains. Sharp Infrared peaks around 1740-1750 cm-1 were present in Fourier Transform Infrared spectra that correspond to exact position for PHA. The use of waste oils and production of poly-3hydroxybutyrate-co-3hydroxyvalerate (3HB-co-3HV by strains used in this study is a good aspect to consider for future prospects as this type of polymer has better properties as compared to PHBs.

  20. Measurement of Muon Neutrino Charged Current Single $\\pi^0$ Production on Hydrocarbon using MINERvA

    Energy Technology Data Exchange (ETDEWEB)

    Altinok, Ozgur [Tufts Univ., Medford, MA (United States)

    2017-01-01

    A sample of charged-current single pion production events for the semi- exclusive channel νµ + CH → µ-π0 + nucleon(s) has been obtained using neutrino exposures of the MINERvA detector. Differential cross sections for muon momentum, muon production angle, pion momentum, pion production angle, and four-momentum transfer square Q2 are reported and are compared to a GENIE-based simulation. The cross section versus neutrino energy is also re- ported. The effects of pion final-state interactions on these cross sections are investigated. The effect of baryon resonance suppression at low Q2 is examined and an event re-weight used by two previous experiments is shown to improve the data versus simulation agreement. The differential cross sections for Q2 for Eν < 4.0 GeV and Eν ≥ 4.0 GeV are examined and the shapes of these distributions are compared to those from the experiment’s $\\bar{v}$µ-CC (π0) measurement. The polarization of the pπ0 system is measured and compared to the simulation predictions. The hadronic invariant mass W distribution is examined for evidence of resonance content, and a search is reported for evidence of a two-particle two-hole (2p2h) contribution. All of the differential cross-section measurements of this Thesis are compared with published MINERvA measurements for νµ-CC (π+) and \\bar{v}$µ-CC (π0) processes.

  1. Hydrogen production with short contact time. Catalytic partial oxidation of hydrocarbons and oxygenated compounds: Recent advances in pilot- and bench-scale testing and process design

    Energy Technology Data Exchange (ETDEWEB)

    Guarinoni, A.; Ponzo, R.; Basini, L. [ENI Refining and Marketing Div., San Donato Milanese (Italy)

    2010-12-30

    ENI R and D has been active for fifteen years in the development of Short Contact Time - Catalytic Partial Oxidation (SCT-CPO) technologies for producing Hydrogen/Synthesis Gas. From the beginning the experimental work addressed either at defining the fundamental principles or the technical and economical potential of the technology. Good experimental responses, technical solutions' simplicity and flexibility, favourable techno-economical evaluations promoted the progressive widening of the field of the investigations. From Natural Gas (NG) the range of ''processable'' Hydrocarbons extended to Liquefied Petroleum Gas (LPG) and Gasoils, including those characterised by high levels of unsaturated and sulphurated molecules and, lately, to other compounds with biological origin. The extensive work led to the definition of different technological solutions, grouped as follows: Technology 1: Air Blown SCT-CPO of Gaseous Hydrocarbons and/or Light Compounds with biological origin Technology 2: Enriched Air/Oxygen Blown SCT-CPO of Gaseous Hydrocarbons and/or Light Compounds with biological origin Technology 3: Enriched Air/Oxygen Blown SCT-CPO of Liquid Hydrocarbons and/or Compounds with biological origin Recently, the licence rights on a non-exclusive basis for the commercialisation of SCT-CPO based processes for H{sub 2}/Synthesis gas production from light hydrocarbons with production capacity lower than 5,000 Nm{sup 3}/h of H{sub 2} or 7,500 Nm3/h of syngas have been assigned to two external companies. In parallel, development of medium- and large-scale plant solutions is progressing within the ENI group framework. These last activities are addressed to the utilisation of SCT-CPO for matching the variable Hydrogen demand in several contexts of oil refining operation. This paper will report on the current status of SCT-CPO with a focus on experimental results obtained, either at pilot- and bench- scale level. (orig.)

  2. Functional genomics reveals that a compact terpene synthase gene family can account for terpene volatile production in apple.

    Science.gov (United States)

    Nieuwenhuizen, Niels J; Green, Sol A; Chen, Xiuyin; Bailleul, Estelle J D; Matich, Adam J; Wang, Mindy Y; Atkinson, Ross G

    2013-02-01

    Terpenes are specialized plant metabolites that act as attractants to pollinators and as defensive compounds against pathogens and herbivores, but they also play an important role in determining the quality of horticultural food products. We show that the genome of cultivated apple (Malus domestica) contains 55 putative terpene synthase (TPS) genes, of which only 10 are predicted to be functional. This low number of predicted functional TPS genes compared with other plant species was supported by the identification of only eight potentially functional TPS enzymes in apple 'Royal Gala' expressed sequence tag databases, including the previously characterized apple (E,E)-α-farnesene synthase. In planta functional characterization of these TPS enzymes showed that they could account for the majority of terpene volatiles produced in cv Royal Gala, including the sesquiterpenes germacrene-D and (E)-β-caryophyllene, the monoterpenes linalool and α-pinene, and the homoterpene (E)-4,8-dimethyl-1,3,7-nonatriene. Relative expression analysis of the TPS genes indicated that floral and vegetative tissues were the primary sites of terpene production in cv Royal Gala. However, production of cv Royal Gala floral-specific terpenes and TPS genes was observed in the fruit of some heritage apple cultivars. Our results suggest that the apple TPS gene family has been shaped by a combination of ancestral and more recent genome-wide duplication events. The relatively small number of functional enzymes suggests that the remaining terpenes produced in floral and vegetative and fruit tissues are maintained under a positive selective pressure, while the small number of terpenes found in the fruit of modern cultivars may be related to commercial breeding strategies.

  3. Functional Genomics Reveals That a Compact Terpene Synthase Gene Family Can Account for Terpene Volatile Production in Apple1[W

    Science.gov (United States)

    Nieuwenhuizen, Niels J.; Green, Sol A.; Chen, Xiuyin; Bailleul, Estelle J.D.; Matich, Adam J.; Wang, Mindy Y.; Atkinson, Ross G.

    2013-01-01

    Terpenes are specialized plant metabolites that act as attractants to pollinators and as defensive compounds against pathogens and herbivores, but they also play an important role in determining the quality of horticultural food products. We show that the genome of cultivated apple (Malus domestica) contains 55 putative terpene synthase (TPS) genes, of which only 10 are predicted to be functional. This low number of predicted functional TPS genes compared with other plant species was supported by the identification of only eight potentially functional TPS enzymes in apple ‘Royal Gala’ expressed sequence tag databases, including the previously characterized apple (E,E)-α-farnesene synthase. In planta functional characterization of these TPS enzymes showed that they could account for the majority of terpene volatiles produced in cv Royal Gala, including the sesquiterpenes germacrene-D and (E)-β-caryophyllene, the monoterpenes linalool and α-pinene, and the homoterpene (E)-4,8-dimethyl-1,3,7-nonatriene. Relative expression analysis of the TPS genes indicated that floral and vegetative tissues were the primary sites of terpene production in cv Royal Gala. However, production of cv Royal Gala floral-specific terpenes and TPS genes was observed in the fruit of some heritage apple cultivars. Our results suggest that the apple TPS gene family has been shaped by a combination of ancestral and more recent genome-wide duplication events. The relatively small number of functional enzymes suggests that the remaining terpenes produced in floral and vegetative and fruit tissues are maintained under a positive selective pressure, while the small number of terpenes found in the fruit of modern cultivars may be related to commercial breeding strategies. PMID:23256150

  4. Production of hydrocarbon fuels from pyrolysis of soybean oils using a basic catalyst.

    Science.gov (United States)

    Xu, Junming; Jiang, Jianchun; Sun, Yunjuan; Chen, Jie

    2010-12-01

    Triglycerides obtained from animals and plants have attracted great attention from researchers for developing an environmental friendly and high-quality fuel, free of nitrogen and sulfur. In the present work, the production of biofuel by catalytic cracking of soybean oil over a basic catalyst in a continuous pyrolysis reactor at atmospheric pressure has been studied. Experiments were designed to study the effect of different types of catalysts on the yield and acid value of the diesel and gasoline fractions from the pyrolytic oil. It was found that basic catalyst gave a product with relatively low acid number. These pyrolytic oils were also further reacted with alcohol in order to decrease their acid value. After esterification, the physico-chemical properties of these biofuels were characterized, and compared with Chinese specifications for conventional diesel fuels. The results showed that esterification of pyrolytic oil from triglycerides represents an alternative technique for producing biofuels from soybean oils with characteristics similar to those of petroleum fuels. Published by Elsevier Ltd.

  5. Methane-rich syngas production from hydrocarbon fuels using multi-functional catalyst/capture agent

    Science.gov (United States)

    Siefert, Nicholas S.; Shekhawat, Dushyant; Berry, David A.; Surdoval, Wayne A.

    2017-02-07

    The disclosure provides a gasification process for the production of a methane-rich syngas at temperatures exceeding 400.degree. C. through the use of an alkali hydroxide MOH, using a gasification mixture comprised of at least 0.25 moles and less than 2 moles of water for each mole of carbon, and at least 0.15 moles and less than 2 moles of alkali hydroxide MOH for each mole of carbon. These relative amounts allow the production of a methane-rich syngas at temperatures exceeding 400.degree. C. by enabling a series of reactions which generate H.sub.2 and CH.sub.4, and mitigate the reforming of methane. The process provides a methane-rich syngas comprised of roughly 20% (dry molar percentage) CH.sub.4 at temperatures above 400.degree. C., and may effectively operate within an IGFC cycle at reactor temperatures between 400-900.degree. C. and pressures in excess of 10 atmospheres.

  6. Volatile profiles of green Spanish-style table olives: Application of compositional data analysis for the segregation of their cultivars and production areas.

    Science.gov (United States)

    Garrido-Fernández, A; Montaño, A; Sánchez-Gómez, A H; Cortés-Delgado, A; López-López, A

    2017-07-01

    The work presents the application of compositional data methodology to analytical results, taking as an example the study of the volatile profiles of green Spanish-style table olives according to cultivars and production areas. For this purpose, the volatile compounds (analysed by GC-MS and expressed as percentages of the total area) were considered as a compositional data set in the Simplex space and, as a result, analysed by their specific new statistical tools. Application of compositional exploratory tools (variation array, tertiary graphs, biplots, or coda-dendrogram) allowed differentiating cultivars and production areas based on their volatile profiles. Also, the application of Cluster and Principal Component analysis to the ilr transformed values (coordinates), following the new methodology, led to more realistic results than the formally incorrect implementation of the standard multivariate analysis (developed for data from the Euclidean space) to percentages (data in the Simplex). Therefore, the work presents a novel consideration of the volatile profiles of table olives as compositional data and shows their proper analysis by statistical tools specifically developed for them. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Continuous determination of volatile products in anaerobic fermenters by on-line capillary gas chromatography.

    Science.gov (United States)

    Diamantis, V; Melidis, P; Aivasidis, A

    2006-07-28

    Bio-ethanol and biogas produced during the anaerobic conversion of organic compounds has been a subject of great interest since the oil crisis of the 1970s. In ethanol fermentation and anaerobic treatment of wastewaters, end-product (ethanol) and intermediate-products (short-chain fatty acids, SCFA) cause inhibition that results in reduced process efficiency. Control of these constituents is of utmost importance for bioreactor optimization and process stability. Ethanol and SCFA can be detected with precision by capillary gas chromatography usually conducted in off-line measurements. In this work, an on-line monitoring and controlling system was developed and connected to the fermenter via an auto-sampling equipment, which could perform the feeding, filtration and dilution of the sample and final injection into the gas chromatograph through an automation-based programmed procedure. The sample was continuously pumped from the recycle stream of the bioreactor and treated using a microfiltration unit. The concentrate was returned to the reactor while the permeate was quantitatively mixed with an internal standard solution. The system comprised of a gas chromatograph with the flow cell and one-shot sampler and a PC with the appropriate software. The on-line measurement of ethanol and SCFA, directly from the liquid phase of an ethanol fermenter and a high-rate continuous mode anaerobic digester, was accomplished by gas chromatography. Also, this monitoring and controlling system was proved to be effective in the continuous fermentation of alcohol-free beer.

  8. Enhanced growth and hydrocarbon production of Botryococcus braunii KMITL 2 by optimum carbon dioxide concentration and concentration-dependent effects on its biochemical composition and biodiesel properties.

    Science.gov (United States)

    Ruangsomboon, Suneerat; Prachom, Noratat; Sornchai, Piyanast

    2017-11-01

    The purposes of this study were to find the optimum level of supplementing CO 2 for increasing the biomass and hydrocarbon production of B. braunii KMITL 2 (A race) and to determine the effects of CO 2 level on CO 2 fixation and biodiesel properties. The experimental results showed that the alga supplemented with 10% CO 2 produced the highest biomass (1.48±0.02gL -1 ) and CO 2 fixation rate (100.43±1.42mgL -1 d -1 ) that were 2.7 and 5.3 times higher than the control (0.04% CO 2 ). The gravimetric hydrocarbon content (36.82±3.39%) and hydrocarbon titer (0.35±0.03gL -1 ) of the alga supplemented with 5% CO 2 were 1.6 and 2.7 times higher than the control. Cultivation of this strain under 5% CO 2 gave the highest hydrocarbon yield and good biodiesel properties with the lowest iodine value and a higher CN value than the ASTM D6751 and EN 14214 fuel standards. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Production of volatile phenols by kimchi Lactobacillus plantarum isolates and factors influencing their phenolic acid decarboxylase gene expression profiles.

    Science.gov (United States)

    Rosimin, Aurelius Albert; Kim, Keun-Sung

    2015-12-01

    Potential of kimchi lactic acid bacteria (LAB) isolates to produce volatile phenols and factors affecting their phenolic acid decarboxylase (padA) gene expression profiles were investigated in this study. Twelve percent (12%) of 50 tested LAB isolates were found to decarboxylate hydroxycinnamic acids. All six isolates were identified as Lactobacillus plantarum and possessed the padA gene. The highest padA expression was achieved on the third day of incubation with ferulic acid, with a relative expression of 3.30±0.32. The effects of glucose, substrate, and product concentrations, and the pH of the medium were investigated using response surface methodology for the first time in this study. The expression profiles of the padA gene were diverse in various stress environments. The concentration of p-coumaric acid was the most significant factor being positively correlated with the expression levels of the padA gene, but other factors did not show any significant effects. High concentrations of substrates could confer antibacterial activity. Therefore, decarboxylation reaction was suggested as a bacterial response to overcome the antibacterial activity. The phenolic acid decarboxylase activities of L. plantarum isolates found in this study can provide insights for their potential application in the development of food-grade flavors and additives. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Heterologous production of methionine-gamma-lyase from Brevibacterium linens in Lactococcus lactis and formation of volatile sulfur compounds.

    Science.gov (United States)

    Hanniffy, Sean B; Philo, Mark; Peláez, Carmen; Gasson, Michael J; Requena, Teresa; Martínez-Cuesta, M C

    2009-04-01

    The conversion of methionine to volatile sulfur compounds (VSCs) is of great importance in flavor formation during cheese ripening and is the focus of biotechnological approaches toward flavor improvement. A synthetic mgl gene encoding methionine-gamma-lyase (MGL) from Brevibacterium linens BL2 was cloned into a Lactococcus lactis expression plasmid under the control of the nisin-inducible promoter PnisA. When expressed in L. lactis and purified as a recombinant protein, MGL was shown to degrade L-methionine as well as other sulfur-containing compounds such as L-cysteine, L-cystathionine, and L-cystine. Overproduction of MGL in recombinant L. lactis also resulted in an increase in the degradation of these compounds compared to the wild-type strain. Importantly, gas chromatography-mass spectrometry analysis identified considerably higher formation of methanethiol (and its oxidized derivatives dimethyl disulfide and dimethyl trisulfide) in reactions containing either purified protein, whole cells, or cell extracts from the heterologous L. lactis strain. This is the first report of production of MGL from B. linens in L. lactis. Given their significance in cheese flavor development, the use of lactic acid bacteria with enhanced VSC-producing abilities could be an efficient way to enhance cheese flavor development.

  11. Inhibitory Effect ofEnterococcus faeciumWB2000 on Volatile Sulfur Compound Production byPorphyromonas gingivalis.

    Science.gov (United States)

    Suzuki, Nao; Higuchi, Takuya; Nakajima, Masato; Fujimoto, Akie; Morita, Hiromitsu; Yoneda, Masahiro; Hanioka, Takashi; Hirofuji, Takao

    2016-01-01

    Volatile sulfur compounds (VSCs) produced by oral anaerobes are the major compounds responsible for oral malodor. Enterococcus faecium WB2000 is recognized as an antiplaque probiotic bacterium. In this study, the effect of E. faecium WB2000 on VSC production by Porphyromonas gingivalis was evaluated, and the mechanism of inhibition of oral malodor was investigated. P. gingivalis ATCC 33277 was cultured in the presence of four lactic acid bacteria, including E. faecium WB2000. Subsequently, P. gingivalis ATCC 33277, W50, W83, and two clinical isolates were cultured in the presence or absence of E. faecium WB2000, and the emission of VSCs from spent culture medium was measured by gas chromatography. The number of P. gingivalis ATCC 33277 in mixed culture with E. faecium WB2000 decreased at 6 h, and the rate of decrease was higher than that in mixed cultures with the other lactic acid bacteria. The numbers of five P. gingivalis strains decreased at similar rates in mixed culture with E. faecium WB2000. The concentration of methyl mercaptan was lower in spent culture medium from P. gingivalis and E. faecium WB2000 cultures compared with that from P. gingivalis alone. Therefore, E. faecium WB2000 may reduce oral malodor by inhibiting the growth of P. gingivalis and neutralizing methyl mercaptan.

  12. Volatile elements production rates in a 1.4 Gev proton-irradiated molten lead-bismuth target

    CERN Document Server

    Zanini, L; Everaerts, P; Fallot, M; Franberg, H; Gröschel, F; Jost, C; Kirchner, T; Kojima, Y; Köster, U; Lebenhaft, J; Manfrina, E; Pitcher, E J; Ravn, H L; Tall, Y; Wagner, W; Wohlmuther, M

    2005-01-01

    Production rates of volatile elements following spallation reaction of 1.4 GeV protons on a liquid Pb/Bi target have been measured. The experiment was performed at the ISOLDE facility at CERN. These data are of interest for the developments of targets for accelerator driven systems such as MEGAPIE. Additional data have been taken on a liquid Pb target. Calculations were performed using the FLUKA and MCNPX Monte Carlo codes coupled with the evolution codes ORIHET3 and FISPACT using different options for the intra-nuclear cascades and evaporation models. Preliminary results from the data analysis show good comparison with calculations for Hg and for noble gases. For other elements such as I it is apparent that only a fraction of the produced isotopes is released. The agreement with the experimental data varies depending on the model combination used. The best results are obtained using MCNPX with the INCL4/ABLA models and with FLUKA. Discrepancies are found for some isotopes produced by fission using the MCNPX ...

  13. Production of hydrogen, ethanol and volatile fatty acids from the seaweed carbohydrate mannitol.

    Science.gov (United States)

    Xia, Ao; Jacob, Amita; Herrmann, Christiane; Tabassum, Muhammad Rizwan; Murphy, Jerry D

    2015-10-01

    Fermentative hydrogen from seaweed is a potential biofuel of the future. Mannitol, which is a typical carbohydrate component of seaweed, was used as a substrate for hydrogen fermentation. The theoretical specific hydrogen yield (SHY) of mannitol was calculated as 5 mol H2/mol mannitol (615.4 mL H2/g mannitol) for acetic acid pathway, 3 mol H2/mol mannitol (369.2 mL H2/g mannitol) for butyric acid pathway and 1 mol H2/mol mannitol (123.1 mL H2/g mannitol) for lactic acid and ethanol pathways. An optimal SHY of 1.82 mol H2/mol mannitol (224.2 mL H2/g mannitol) was obtained by heat pre-treated anaerobic digestion sludge under an initial pH of 8.0, NH4Cl concentration of 25 mM, NaCl concentration of 50mM and mannitol concentration of 10 g/L. The overall energy conversion efficiency achieved was 96.1%. The energy was contained in the end products, hydrogen (17.2%), butyric acid (38.3%) and ethanol (34.2%). Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Polycyclic aromatic hydrocarbons and halogenated persistent organic pollutants in canned fish and seafood products: smoked versus non-smoked products.

    Science.gov (United States)

    Drabova, Lucie; Pulkrabova, Jana; Kalachova, Kamila; Tomaniova, Monika; Kocourek, Vladimir; Hajslova, Jana

    2013-01-01

    In this study, levels of several groups of environmental contaminants represented by PAHs, PCBs, organochlorine pesticides and polybrominated diphenyl ethers were determined in various types of canned smoked and non-smoked fish and seafood products (54 samples) obtained from the Czech market. PAHs were detected in all of the studied samples, and at least one of the target halogenated persistent organic pollutants was present above the LOQ in 85% of the samples. The levels of PAHs, PCBs, organochlorine pesticides (mainly DDTs) and polybrominated diphenyl ethers found in the canned products varied in the range of 1.4-116 µg kg(-1), 0.6-59.6 µg kg(-1), 0.6-82.7 µg kg(-1) and 0.1-2.1 µg kg(-1) can content, respectively. Smoked sprats were the most contaminated fish product (n = 12) in which the highest levels of both PAHs and persistent organic pollutants were found. In 67% of the samples of smoked sprats in oil, the level of benzo[a]pyrene exceeded the maximum level of 5 µg kg(-1) established for smoked fish by European Union legislation. The distribution of target analytes between oil and fish fractions was also assessed. Significantly higher levels of PAHs were measured in the oil fraction.

  15. Concentrations of cyclic volatile methylsiloxanes in European cosmetics and personal care products: Prerequisite for human and environmental exposure assessment

    NARCIS (Netherlands)

    Dudzina, T.; Goetz, N. von; Bogdal, C.; Biesterbos, J.W.H.; Hungerbuhler, K.

    2014-01-01

    Low molecular weight cyclic volatile methylsiloxanes (cVMSs) are widely employed as emollients and carrier solvents in personal care formulations in order to acquire desired performance benefits owing to their distinctive physicochemical properties. Under current European legislation cosmetic

  16. Changes in salivary microbiota increase volatile sulfur compounds production in healthy male subjects with academic-related chronic stress.

    Directory of Open Access Journals (Sweden)

    Bruno Dias Nani

    Full Text Available To investigate the associations among salivary bacteria, oral emanations of volatile sulfur compounds, and academic-related chronic stress in healthy male subjects.Seventy-eight healthy male undergraduate dental students were classified as stressed or not by evaluation of burnout, a syndrome attributed to academic-related chronic stress. This evaluation was carried out using the Maslach Burnout Inventory-Student Survey questionnaire. Oral emanations of hydrogen sulfide, methyl mercaptan, and dimethyl sulfide were measured using an Oral Chroma™ portable gas chromatograph. The amounts in saliva of total bacteria and seven bacteria associated with halitosis were quantified by qPCR. The in vitro production of H2S by S. moorei and/or F. nucleatum was also measured with the Oral Chroma™ instrument.The stressed students group showed increased oral emanations of hydrogen sulfide and dimethyl sulfide, together with higher salivary Solobacterium moorei levels (p < 0.05, Mann Whitney test. There were moderate positive correlations between the following pairs of variables: Fusobacterium nucleatum and S. moorei; F. nucleatum and hydrogen sulfide; Tannerella forsythia and F. nucleatum; T. forsythia and S. moorei. These correlations only occurred for the stressed group (p < 0.05, Spearman correlation. The in vitro experiment demonstrated that S. moorei increased H2S production by F. nucleatum (p < 0.05, ANOVA and Tukey's test.The increased amount of S. moorei in saliva, and its coexistence with F. nucleatum and T. forsythia, seemed to be responsible for increased oral hydrogen sulfide in the healthy male stressed subjects.

  17. Separation and analysis of trace volatile formaldehyde in aquatic products by a MoO₃/polypyrrole intercalative sampling adsorbent with thermal desorption gas chromatography and mass spectrometry.

    Science.gov (United States)

    Ma, Yunjian; Zhao, Cheng; Zhan, Yisen; Li, Jianbin; Zhang, Zhuomin; Li, Gongke

    2015-05-01

    An in situ embedded synthesis strategy was developed for the preparation of a MoO3 /polypyrrole intercalative sampling adsorbent for the separation and analysis of trace volatile formaldehyde in aquatic products. Structural and morphological characteristics of the MoO3 /polypyrrole intercalative adsorbent were investigated by a series of characterization methods. The MoO3 /polypyrrole sampling adsorbent possessed a higher sampling capacity and selectivity for polar formaldehyde than commonly used commercial adsorbent Tenax TA. Finally, the MoO3 /polypyrrole adsorbent was packed in the thermal desorption tube that was directly coupled to gas chromatography with mass spectrometry for the analysis of trace volatile formaldehyde in aquatic products. Trace volatile formaldehyde from real aquatic products could be selectively sampled and quantified to be 0.43-6.6 mg/kg. The detection limit was achieved as 0.004 μg/L by this method. Good recoveries for spiked aquatic products were achieved in range of 75.0-108% with relative standard deviations of 1.2-9.0%. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Unstable volatility

    DEFF Research Database (Denmark)

    Casas, Isabel; Gijbels, Irène

    2012-01-01

    The objective of this paper is to introduce the break-preserving local linear (BPLL) estimator for the estimation of unstable volatility functions for independent and asymptotically independent processes. Breaks in the structure of the conditional mean and/or the volatility functions are common...... in Finance. Nonparametric estimators are well suited for these events due to the flexibility of their functional form and their good asymptotic properties. However, the local polynomial kernel estimators are not consistent at points where the volatility function has a break. The estimator presented...

  19. Headspace volatile markers for sensitivity of cocoa (Theobroma cacao L.) somatic embryos to cryopreservation.

    Science.gov (United States)

    Fang, Jong-Yi; Wetten, Andrew; Johnston, Jason

    2008-03-01

    The mechanisms that reduce the viability of plant somatic embryos following cryopreservation are not known. The objective of the present study was to evaluate the sensitivity of cocoa (Theobroma cacao L.) somatic embryos at different stages of an encapsulation-dehydration protocol using stress-related volatile hydrocarbons as markers of injury and recovery. The plant stress hormone ethylene and volatile hydrocarbons derived from hydroxyl radicals (methane) and lipid peroxidation (ethane) were determined using gas chromatography headspace analysis. Ethylene and methane were the only volatiles detected, with both being produced after each step of the cryogenic protocol. Ethylene production was significantly reduced following exposure to liquid nitrogen, but then increased in parallel with embryo recovery. In contrast, the production of methane was cyclic during recovery, with the first cycle occurring earlier for embryos recovered from liquid nitrogen and desiccation than those recovered from earlier steps in the protocol. These results suggest that loss of somatic embryo viability during cryopreservation may be related to the oxidative status of the tissue, and its capacity to produce ethylene. This study has demonstrated that headspace volatile analysis provides a robust non-destructive analytical approach for assessing the survival and recovery of plant somatic embryos following cryopreservation.

  20. Characterization of the toxicological hazards of hydrocarbon solvents.

    Science.gov (United States)

    Mckee, Richard H; Adenuga, M David; Carrillo, Juan-Carlos

    2015-04-01

    Hydrocarbon solvents are liquid hydrocarbon fractions derived from petroleum processing streams, containing only carbon and hydrogen atoms, with carbon numbers ranging from approximately C5-C20 and boiling between approximately 35-370°C. Many of the hydrocarbon solvents have complex and variable compositions with constituents of 4 types, alkanes (normal paraffins, isoparaffins, and cycloparaffins) and aromatics (primarily alkylated one- and two-ring species). Because of the compositional complexity, hydrocarbon solvents are now identified by a nomenclature ("the naming convention") that describes them in terms of physical/chemical properties and compositional elements. Despite the compositional complexity, most hydrocarbon solvent constituents have similar toxicological properties, and the overall toxicological hazards can be characterized in generic terms. To facilitate hazard characterization, the solvents were divided into 9 groups (categories) of substances with similar physical and chemical properties. Hydrocarbon solvents can cause chemical pneumonitis if aspirated into the lung, and those that are volatile can cause acute CNS effects and/or ocular and respiratory irritation at exposure levels exceeding occupational recommendations. Otherwise, there are few toxicologically important effects. The exceptions, n-hexane and naphthalene, have unique toxicological properties, and those solvents containing constituents for which classification is required under the Globally Harmonized System (GHS) are differentiated by the substance names. Toxicological information from studies of representative substances was used to fulfill REACH registration requirements and to satisfy the needs of the OECD High Production Volume (HPV) initiative. As shown in the examples provided, the hazard characterization data can be used for hazard classification and for occupational exposure limit recommendations.

  1. Biological effects of polycyclic aromatic hydrocarbons (PAH) and their first metabolic products in in vivo exposed Atlantic cod (Gadus morhua).

    Science.gov (United States)

    Pampanin, Daniela M; Le Goff, Jeremie; Skogland, Karianne; Marcucci, Cristian R; Øysæd, Kjell Birger; Lorentzen, Marianne; Jørgensen, Kåre B; Sydnes, Magne O

    2016-01-01

    The monitoring of the presence of polycyclic aromatic hydrocarbons (PAH) in the aquatic environment is a worldwide activity since some of these compounds are well-established carcinogens and mutagens. Contaminants in this class are in fact regarded as priority hazardous substances for environmental pollution (Water Framework Directive 2000/60/EC). In this study, Atlantic cod (Gadus morhua) was selected to assess in vivo effects of two PAH and their first metabolic products, namely, the corresponding trans-dihydrodiols, using biological markers. Fish were exposed for 1 wk to a single PAH (naphthalene or chrysene) and its synthetic metabolites ((1R,2R)-1,2-dihydronaphthalene-1,2-diol and (1R,2R)-1,2-dihydrochrysene-1,2-diol) by intraperitoneal injection in a continuous seawater flow system. After exposure, PAH metabolism including PAH metabolites in bile and ethoxyresorufin O-deethylase (EROD) activity, oxidative stress glutathione S-transferases (GST) and catalase (CAT) activities, and genotoxicity such as DNA adducts were evaluated, as well as general health conditions including condition index (CI), hepatosomatic index (HSI), and gonadosomatic index (GSI). PAH metabolite values were low and not significantly different when measured with the fixed-wavelength fluorescence screening method, while the gas chromatography-mass spectroscopy (GC-MS) method showed an apparent dose response in fish exposed to naphthalene. DNA adduct levels ≥0.16 × 10(-8) relative adduct level (RAL) were detected. It should be noted that 0.16 × 10(-8) RAL is considered the maximal acceptable background level for this species. The other biomarkers activities of catalase, GST, and EROD did not display a particular compound- or dose-related response. The GSI values were significantly lower in some chrysene- and in both naphthalene- and naphthalene diol-exposed groups compared to control.

  2. Volatile fatty acids (VFAs) production from swine manure through short-term dry anaerobic digestion and its separation from nitrogen and phosphorus resources in the digestate

    OpenAIRE

    Huang, Weiwei; Huang, Wenli; Yuan, Tian; Zhao, Ziwen; Cai, Wei; Zhang, Zhenya; Lei, Zhongfang; Feng, Chuanping

    2016-01-01

    The sustainability of an agricultural system depends highly upon the recycling of all useful substances from agricultural wastes. This study explored the feasibility of comprehensive utilization of C, N and P resources in swine manure (SM) through short-term dry anaerobic digestion (AD) followed by dry ammonia stripping, aiming at achieving (1) effective total volatile fatty acids (VFAs) production and separation; (2) ammonia recovery from the digestate; and (3) preservation of high P bioavai...

  3. Chasing volatility

    DEFF Research Database (Denmark)

    Caporin, Massimiliano; Rossi, Eduardo; Santucci de Magistris, Paolo

    estimate alternative specifications of the model using a set of daily bipower measures for 7 stock indexes and 16 individual NYSE stocks. The estimates of the jump component confirm that the probability of jumps dramatically increases during the financial crisis. Compared to other realized volatility...... models, the introduction of the jump component provides a sensible improvement in the fit, as well as for in-sample and out-of-sample volatility tail forecasts....

  4. Role of methyl group number on SOA formation from aromatic hydrocarbons photooxidation under low NOx conditions

    Science.gov (United States)

    Li, L.; Tang, P.; Nakao, S.; Chen, C.-L.; Cocker, D. R., III

    2015-11-01

    Substitution of methyl groups onto the aromatic ring determines the SOA formation from the aromatic hydrocarbon precursor. This study links the number of methyl groups on the aromatic ring to SOA formation from aromatic hydrocarbons photooxidation under low NOx conditions (HC / NO > 10 ppb C : ppb). Aromatic hydrocarbons with increasing numbers of methyl groups are systematically studied. SOA formation from pentamethylbenzene and hexamethylbenzene are reported for the first time. A decreasing SOA yield with increasing number of methyl groups is observed. Linear trends are found in both f44 vs. f43 and O / C vs. H / C for SOA from aromatic hydrocarbons with zero to six methyl groups. An SOA oxidation state predictive method based on benzene is used to examine the effect of added methyl groups on aromatic oxidation under low NOx conditions. Further, the impact of methyl group number on density and volatility of SOA from aromatic hydrocarbons is explored. Finally, a mechanism for methyl group impact on SOA formation is suggested. Overall, this work suggests as more methyl groups are attached on the aromatic ring, SOA products from these aromatic hydrocarbons become less oxidized per mass/carbon.

  5. DOES ENERGY CONSUMPTION VOLATILITY AFFECT REAL GDP VOLATILITY? AN EMPIRICAL ANALYSIS FOR THE UK

    Directory of Open Access Journals (Sweden)

    Abdul Rashid

    2013-10-01

    Full Text Available This paper empirically examines the relation between energy consumption volatility and unpredictable variations in real gross domestic product (GDP in the UK. Estimating the Markov switching ARCH model we find a significant regime switching in the behavior of both energy consumption and GDP volatility. The results from the Markov regime-switching model show that the variability of energy consumption has a significant role to play in determining the behavior of GDP volatilities. Moreover, the results suggest that the impacts of unpredictable variations in energy consumption on GDP volatility are asymmetric, depending on the intensity of volatility. In particular, we find that while there is no significant contemporaneous relationship between energy consumption volatility and GDP volatility in the first (low-volatility regime, GDP volatility is significantly positively related to the volatility of energy utilization in the second (high-volatility regime.

  6. Development of Primary Volatile Production in COMET C/20O9 Pl (GARRADD) During its 2011-2O12 Apparition

    Science.gov (United States)

    Mumma, M. J.; {agamomo. :/; Vo; DiSanti, M. A.; Bonev, B. P.; Lippi, M.; Boehnhardt, H.; Keane, J. V.; Meech, K. J.; Blake, G. A.

    2012-01-01

    We quantified primary volatiles in comet C/2009 Pl (Garradd) through pre- and post-perihelion observations acquired during its apparition in 2011-12 [1,2,3]. Detected volatiles include H2O, CO, CH4, C2H2, C2H6, HCN, NH3, H2CO, and CH3OH. We present production rates and chemical abundance ratios (relative to water) for all species, and I-D spatial profiles for multiple primary volatiles. We discuss these findings in the context of an emerging taxonomy based on primary volatiles in comets [4]. We used three spectrometer/telescope combinations. On UT 20ll August 7 (Rh 2.4 AU) and September 17-21 (Rh 2.0 AU), we used CRIRES at ESO's Very Large Telescope (VLT) [1]. On September 8 and 9 (Rh 2.1 AU), we used NIRSPEC at Keck-2 and CSHELL at IRTF [2]. Using NIRSPEC on October 13 and 2012 January 08 (Rh 1.83 and 1.57 AU, respectively), we detected nine primary volatiles pre-perihelion, and six post-perihelion [3]. CO was enriched in Garradd while C2H2 was strongly depleted. C2H6 and CH3OH displayed abundances close to those measured for the majority of Oort cloud comets observed to date. The high fractional abundance of CO identifies comet C12009 P1 as a CO-rich comet. Spatial profiles revealed notable differences among individual primary species. Given the relatively large heliocentric distance of C/2009 Pl, we explored the effect of water not being fully sublimated within our field of view and we identi$, the "missing" water fraction needed to reconcile the retrieved abundance ratios with the mean values found for "organics-normal" comets.

  7. The effect of deodorization on volatile compositions of fucoidan extracted from brown seaweed (Sargassum sp.)

    Science.gov (United States)

    Khalafu, Sharifah Habibah Syed; Mustapha, Wan Aida Wan; Lim, Seng Joe; Maskat, Mohamad Yusof

    2016-11-01

    Fucoidan is a biologically active polysaccharide that were made up of complex mixture of fucose, sulfate and uronic acid. This study was conducted to identify the volatile compositions of crude fucoidan and deodorized fucoidans extracted from brown seaweed Sargassum sp. (Fsar). The volatile compositions was also compared with a standard commercial fucoidan (Fysk). Fucoidan was extracted from Sargassum sp. originated in coastal area of Indonesia, by using a low pH acid extraction method. Approximately 20 mL of 1% freshly extracted fucoidan was then subjected to deodorization process by using three different method i.e., by treating it with 10 g activated carbon (Fac), 0.4 g ion exchange resin, Amberlite 67 (Fresin) and 2 mL of 1% calcium carbonate (FCaCO3) and incubated for 12 hrs before further analysis. Forty-six volatile compounds were successfully identified in all of the five samples by using Headspace-Solid Phase Microextraction (HS-SPME) and analysed by using Gas Chromatography Mass Spectrometer (GCMS). In Fsar, 72% of the total volatile constituents were identified as aromatic hydrocarbons, 23% hydrocarbons and 5% alcohols. In Fysk, all compounds detected are in group hydrocarbons. In Fsar, all of the compounds identified were classified as odor active compounds which had a contribution to unpleasant odor in fucoidan. After deodorization, 72% of aromatic hydrocarbons detected in Fsar were reported to be absent in all deodorized fucoidans. Both Fresin and FCaCO3 showed a reduction in peak area percentages of phenol, 2,4-bis (1,1-dimethylethyl)- from Fsar (1.30%) to 0.79 and 1.07% respectively. Meanwhile in Fac, no presence of phenol, 2,4-bis (1,1-dimethylethyl) was reported. These findings are essential to propel the advancement of research in deodorization technologies of marine products, especially fucoidans.

  8. Total Petroleum Hydrocarbon Criteria Working Group (TPHCWG) Field Demonstration Report: IRP Site 4, POL Area, Springfield ANG Base, Springfield, Ohio

    National Research Council Canada - National Science Library

    Reed, Dennis

    2003-01-01

    ...) methodology to compare the approaches. Soil core composites were analyzed for trichloroethylene, gasoline-range organics, volatile petroleum hydrocarbons, benzene, toluene, ethylbenzene, and xylenes...

  9. Contribution of low vapor pressure-volatile organic compounds (LVP-VOCs) from consumer products to ozone formation in urban atmospheres

    Science.gov (United States)

    Shin, Hyeong-Moo; McKone, Thomas E.; Bennett, Deborah H.

    2015-05-01

    Because recent laboratory testing indicates that some low vapor pressure-volatile organic compounds (LVP-VOC) solvents readily evaporate at ambient conditions, LVP-VOCs used in some consumer product formulations may contribute to ozone formation. The goal of this study is to determine the fraction of LVP-VOCs available for ozone formation from the use of consumer products for two hypothetical emissions. This study calculates and compares the fraction of consumed product available for ozone formation as a result of (a) volatilization to air during use and (b) down-the-drain disposal. The study also investigates the impact of different modes of releases on the overall fraction available in ambient air for ozone formation. For the portion of the LVP-VOCs volatilized to air during use, we applied a multi-compartment mass-balance model to track the fate of emitted LVP-VOCs in a multimedia urban environment. For the portion of the LVP-VOCs disposed down the drain, we used a wastewater treatment plant (WWTP) fate model to predict the emission rates of LVP-VOCs to ambient air at WWTPs or at the discharge zone of the facilities and then used these results as emissions in the multimedia urban environment model. In a WWTP, the LVP-VOCs selected in this study are primarily either biodegraded or removed via sorption to sludge depending on the magnitude of the biodegradation half-life and the octanol-water partition coefficient. Less than 0.2% of the LVP-VOCs disposed down the drain are available for ozone formation. In contrast, when the LVP-VOC in a consumer product is volatilized from the surface to which it has been applied, greater than 90% is available for photochemical reactions either at the source location or in the downwind areas. Comparing results from these two modes of releases allows us to understand the importance of determining the fraction of LVP-VOCs volatilized versus disposed down the drain when the product is used by consumers. The results from this study

  10. The formation of volatile corrosion products during the mixed oxidation-chlorination of cobalt at 650 C

    Science.gov (United States)

    Jacobson, N. S.; Mcnallan, M. J.; Lee, Y. Y.

    1986-01-01

    The reaction of cobalt with 1 pct Cl2 in 1, 10, and 50 pct O2/Ar atmospheres has been studied at 650 C with thermogravimetry and mass spectrometry. The principal vapor species appear to be CoCl2 and CoCl3. In all cases, CoCl2(s) forms at the oxide/metal interface and equilibration of the volatile chlorides with Co3O4 does not occur in the early stages of the reaction. In the 1 pct Cl2 1 pct O2-Ar case, continuous volatilization occurs. In the 1 pct Cl2-10 pct O2-Ar and 1 pct CL2-50 pct O2-Ar cases, volatilization occurs only in the first few minutes of reaction. Afterwards, the reaction is predominantly oxidation.

  11. Volatile organic compound flux from manure of cattle fed diets differing in grain processing method and co-product inclusion

    Science.gov (United States)

    Hales, Kristin; Parker, David B.; Cole, N. Andy

    2015-01-01

    Odor emissions from livestock production have become increasingly important in the past decade. Odors derived from animal feeding operations are caused by odorous VOC emitted from the mixture of feces and urine, as well as feed and silage which may be experiencing microbial fermentation. Distillers grains are a by-product of corn grain fermentation used to produce fuel ethanol, and this industry has grown rapidly throughout the U.S. in past years. Therefore, the use of wet distillers grains with solubles (WDGS) in feedlot cattle diets has also increased. The objective of this research was to determine specific VOC emissions from feces and urine or a mixture of both, from cattle fed steam flaked or dry-rolled corn (DRC)-based diets containing either 0% or 30% WDGS. Flux of dimethyl trisulfide was greater from feces of cattle fed DRC than steam-flaked corn (SFC) diets. No other differences in flux from feces were detected across dietary treatments for phenol, 4-methylphenol, indole, skatole, dimethyl disulfide, and flux of volatile fatty acids (VFA) such as acetic, propionic, isobutyric, butyric, isovaleric, and valeric acids (P > 0.15). Flux of skatole, acetic acid, and valeric acid from urine was greater for cattle fed SFC than DRC diets (P < 0.05). Moreover, dimethyl disulfide flux was greater for cattle fed DRC vs. SFC diets (P = 0.05). When evaluating WDGS inclusion in the diet, flux of acetic acid and heptanoic acid from urine was greater when cattle were fed diets containing 0% WDGS than 30% WDGS (P < 0.05). When combining urine and feces in the ratio in which they were excreted from the animal, flux of propionic acid was greater when cattle were fed DRC vs. SFC diets (P = 0.05). Based on these results, the majority of the VOC, VFA, and odor flux from cattle feeding operations is from the urine. Therefore, dietary strategies to reduce odor from cattle feeding facilities should primarily focus on reducing excretion of odorous compounds in the urine.

  12. Priming of Production in Maize of Volatile Organic Defence Compounds by the Natural Plant Activator cis-Jasmone.

    Science.gov (United States)

    Oluwafemi, Sunday; Dewhirst, Sarah Y; Veyrat, Nathalie; Powers, Stephen; Bruce, Toby J A; Caulfield, John C; Pickett, John A; Birkett, Michael A

    2013-01-01

    cis-Jasmone (CJ) is a natural plant product that activates defence against herbivores in model and crop plants. In this study, we investigated whether CJ could prime defence in maize, Zea mays, against the leafhopper, Cicadulina storeyi, responsible for the transmission of maize streak virus (MSV). Priming occurs when a pre-treatment, in this case CJ, increases the potency and speed of a defence response upon subsequent attack on the plant. Here, we tested insect responses to plant volatile organic compounds (VOCs) using a Y-tube olfactometer bioassay. Our initial experiments showed that, in this system, there was no significant response of the herbivore to CJ itself and no difference in response to VOCs collected from unexposed plants compared to CJ exposed plants, both without insects. VOCs were then collected from C. storeyi-infested maize seedlings with and without CJ pre-treatment. The bioassay revealed a significant preference by this pest for VOCs from infested seedlings without the CJ pre-treatment. A timed series of VOC collections and bioassays showed that the effect was strongest in the first 22 h of insect infestation, i.e. before the insects had themselves induced a change in VOC emission. Chemical analysis showed that treatment of maize seedlings with CJ, followed by exposure to C. storeyi, led to a significant increase in emission of the defensive sesquiterpenes (E)-(1R,9S)-caryophyllene, (E)-α-bergamotene, (E)-β-farnesene and (E)-4,8-dimethyl-1,3,7-nonatriene, known to act as herbivore repellents. The chemical analysis explains the behavioural effects observed in the olfactometer, as the CJ treatment caused plants to emit a blend of VOCs comprising more of the repellent components in the first 22 h of insect infestation than control plants. The speed and potency of VOC emission was increased by the CJ pre-treatment. This is the first indication that CJ can prime plants for enhanced production of defensive VOCs antagonist towards herbivores.

  13. Ethanol yield and volatile compound content in fermentation of agave must by Kluyveromyces marxianus UMPe-1 comparing with Saccharomyces cerevisiae baker's yeast used in tequila production.

    Science.gov (United States)

    López-Alvarez, Arnoldo; Díaz-Pérez, Alma Laura; Sosa-Aguirre, Carlos; Macías-Rodríguez, Lourdes; Campos-García, Jesús

    2012-05-01

    In tequila production, fermentation is an important step. Fermentation determines the ethanol productivity and organoleptic properties of the beverage. In this study, a yeast isolated from native residual agave must was identified as Kluyveromyces marxianus UMPe-1 by 26S rRNA sequencing. This yeast was compared with the baker's yeast Saccharomyces cerevisiae Pan1. Our findings demonstrate that the UMPe-1 yeast was able to support the sugar content of agave must and glucose up to 22% (w/v) and tolerated 10% (v/v) ethanol concentration in the medium with 50% cells survival. Pilot and industrial fermentation of agave must tests showed that the K. marxianus UMPe-1 yeast produced ethanol with yields of 94% and 96% with respect to fermentable sugar content (glucose and fructose, constituting 98%). The S. cerevisiae Pan1 baker's yeast, however, which is commonly used in some tequila factories, showed 76% and 70% yield. At the industrial level, UMPe-1 yeast shows a maximum velocity of fermentable sugar consumption of 2.27g·L(-1)·h(-1) and ethanol production of 1.38g·L(-1)·h(-1), providing 58.78g ethanol·L(-1) at 72h fermentation, which corresponds to 96% yield. In addition, the major and minor volatile compounds in the tequila beverage obtained from UMPe-1 yeast were increased. Importantly, 29 volatile compounds were identified, while the beverage obtained from Pan1-yeast contained fewer compounds and in lower concentrations. The results suggest that the K. marxianus UMPe-1 is a suitable yeast for agave must fermentation, showing high ethanol productivity and increased volatile compound content comparing with a S. cerevisiae baker's yeast used in tequila production. Copyright © 2012 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  14. Modeling the sensory impact of defined combinations of volatile lipid oxidation products on fishy and metallic off-flavors

    DEFF Research Database (Denmark)

    Venkateshwarlu Venkat, Guidipati; Bruni Let, Mette; Meyer, Anne S.

    2004-01-01

    volatiles were subjected to sensory descriptive analysis for fishy and metallic off-flavors. The data were analyzed using partial least-squares regression and multiple linear regression to develop mathematical models. The models revealed significant main effects of (EZ)-2,6-nonadienal and 1-penten-3-one...

  15. Production Technology Requirements with Respect to Agile Manufacturing - A survey on how the metal forming industry can adapt to volatile times

    Directory of Open Access Journals (Sweden)

    Peter Oswald

    2015-11-01

    Full Text Available Agile manufacturing is a production concept that was originally developed at the Iaccoca Institute of Lehigh University (USA. The purpose was to develop a proposal on how the US could regain its supremacy in manufacturing. The objective of this thesis is to apply the agile manufacturing concept to the metal forming industry and to develop a recommendation of action how the press manufacturers can support their customers in dealing with volatile markets in an efficient way. For that reason production technology requirements are developed that should highlight characteristics of a production line that is essential to become “agile”. As a point of departure a literature research has been carried out to determine what has already been published about “agile” production requirements and how other industries deal with volatile markets. In a next step interviews with industry experts have been carried out to verify the findings of the literature review. The findings were documented in case studies which where the basis for the derivation of the production technology requirements that are relevant for the metal forming industry

  16. A plan to reduce volatile organic compound emissions from consumer products in Canada (excluding windshield washer fluid and surface coatings) : final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    This report highlights the recommendations made by the Canadian Council of Ministers of the Environment for the development of a guideline to provide a means by which to reduce (VOC) emissions from consumer products (excluding windshield washer fluid and surface coatings) in Canada. VOCs and nitrogen oxides react photochemically in the presence of sunlight to create ground-level ozone, a primary component of urban smog which has a detrimental effect on human health, agricultural crops and building materials. In recent years, most urban areas of Canada have shown an annual increase in the maximum acceptable air quality levels for ground level ozone. Reducing emissions of volatile organic compounds (VOCs) from consumer products was first suggested in 1990 by the Canadian Council of Ministers of the Environment in phase one of their program entitled the 'Management plan for nitrogen oxides and volatile organic compounds'. Phase 2 of the program was implemented in 1997 to harmonize the emissions reduction program with the United States Environmental Protection Agency regulations. The Canadian Environmental Protection Agency (CEPA) recommended the following control options: (1) a CEPA guideline should be developed which states the maximum VOC and high-volatility organic compound (HVOC) content in Canadian consumer products including hair care products, herbicides, insecticides, air fresheners, deodorants, fungicides, surface cleaners, fragrance products, anti-microbial agents, laundry products and automotive detailing products. These limits should be identical to those found in the 1998 U.S. Final Rule for Consumer Products, (2) the CEPA guideline should require that records specifying VOC content in weight-per cent be maintained for a period of three years, (3) the CEPA guideline should include a declaration procedure for Canadian importers and manufacturers of consumer products to report to Environment Canada regarding the VOC content of their products, and

  17. Apparatus for hydrocarbon extraction

    Science.gov (United States)

    Bohnert, George W.; Verhulst, Galen G.

    2013-03-19

    Systems and methods for hydrocarbon extraction from hydrocarbon-containing material. Such systems and methods relate to extracting hydrocarbon from hydrocarbon-containing material employing a non-aqueous extractant. Additionally, such systems and methods relate to recovering and reusing non-aqueous extractant employed for extracting hydrocarbon from hydrocarbon-containing material.

  18. CHEMICAL INVESTIGATION OF THE VOLATILE CONSTITUENTS ...

    African Journals Online (AJOL)

    The major volatile constituents of the oils from the integral parts of Cleome viscosa L. from Nigeria have been identified by GC, GC/MS and 1H NMR. The main constituents of the non-polar fraction of the oils were monoterpene hydrocarbons (21% in stem/leaves, 15% in seed/fruits, 12% in roots) and some oxygenated ...

  19. short communication chemical investigation of the volatile ...

    African Journals Online (AJOL)

    ABSTRACT. The major volatile constituents of the oils from the integral parts of Cleome viscosa. L. from Nigeria have been identified by GC, GCHVIS and lH NMR. The main constituents of the non-polar fraction of the oils were monoterpene hydrocarbons (21% in stem/leaves, 15% in seed/fruits, 12% in roots) and some ...

  20. Volatile terpenoids from aeciospores of Cronartium fusiforme.

    Science.gov (United States)

    Laseter, J. L.; Weete, J. D.; Walkinshaw, C. H.

    1973-01-01

    Identification of the terpenoids present in the volatile fraction from aeciospores of the gall rust fungus Cronartium fusiforme. The major monoterpenoid hydrocarbons found to be present with only traces of camphene include alpha-pinene, beta-pinene, delta(3)-carene, myrcene, linonene, beta-phellandrene, and delta-terpinene. A number of monoterpenoid alcohols, acyclic sesquiterpenes, and aromatic compounds were also present.

  1. Stochastic volatility selected readings

    CERN Document Server

    Shephard, Neil

    2005-01-01

    Neil Shephard has brought together a set of classic and central papers that have contributed to our understanding of financial volatility. They cover stocks, bonds and currencies and range from 1973 up to 2001. Shephard, a leading researcher in the field, provides a substantial introduction in which he discusses all major issues involved. General Introduction N. Shephard. Part I: Model Building. 1. A Subordinated Stochastic Process Model with Finite Variance for Speculative Prices, (P. K. Clark). 2. Financial Returns Modelled by the Product of Two Stochastic Processes: A Study of Daily Sugar Prices, 1961-7, S. J. Taylor. 3. The Behavior of Random Variables with Nonstationary Variance and the Distribution of Security Prices, B. Rosenberg. 4. The Pricing of Options on Assets with Stochastic Volatilities, J. Hull and A. White. 5. The Dynamics of Exchange Rate Volatility: A Multivariate Latent Factor ARCH Model, F. X. Diebold and M. Nerlove. 6. Multivariate Stochastic Variance Models. 7. Stochastic Autoregressive...

  2. Influence of spreading structure in an aqueous solution-hydrocarbon system on extinguishing of the flame of oil products

    Directory of Open Access Journals (Sweden)

    Korolchenko Dmitriy

    2016-01-01

    Full Text Available On the basis of experimental studies it was revealed that adding of electrolyte - ammonium chloride - into solution of film-forming foaming agent leads to decrease of interfacial tension on a border with heptane, and increase of surface tension on a border with air. It is experimentally shown that dependence between specific consumption and flow rate of foaming agent passes through the minimum point that allowed defining influence of electrolyte on a value of minimum specific consumption and optimum flow rate of foam during extinguishing of a hydrocarbon flame. The structure of spreading in a foaming agent solution – hydrocarbon system defines the value of fire extin-guishing efficiency of foam decreasing together with lowering of spreading coefficient and interfacial tension.

  3. Drought-tolerance of wheat improved by rhizosphere bacteria from harsh environments: enhanced biomass production and reduced emissions of stress volatiles.

    Directory of Open Access Journals (Sweden)

    Salme Timmusk

    Full Text Available Water is the key resource limiting world agricultural production. Although an impressive number of research reports have been published on plant drought tolerance enhancement via genetic modifications during the last few years, progress has been slower than expected. We suggest a feasible alternative strategy by application of rhizospheric bacteria coevolved with plant roots in harsh environments over millions of years, and harboring adaptive traits improving plant fitness under biotic and abiotic stresses. We show the effect of bacterial priming on wheat drought stress tolerance enhancement, resulting in up to 78% greater plant biomass and five-fold higher survivorship under severe drought. We monitored emissions of seven stress-related volatiles from bacterially-primed drought-stressed wheat seedlings, and demonstrated that three of these volatiles are likely promising candidates for a rapid non-invasive technique to assess crop drought stress and its mitigation in early phases of stress development. We conclude that gauging stress by elicited volatiles provides an effectual platform for rapid screening of potent bacterial strains and that priming with isolates of rhizospheric bacteria from harsh environments is a promising, novel way to improve plant water use efficiency. These new advancements importantly contribute towards solving food security issues in changing climates.

  4. Volatility and entrainment of feed components and product glass characteristics during pilot-scale vitrification of simulated Hanford site low-level waste

    Energy Technology Data Exchange (ETDEWEB)

    Shade, J.W.

    1996-05-03

    Commercially available melter technologies were tested for application to vitrification of Hanford site low-level waste (LLW). Testing was conducted at vendor facilities using a non-radioactive LLW simulant. Technologies tested included four Joule-heated melter types, a carbon electrode melter, a cyclone combustion melter, and a plasma torch-fired melter. A variety of samples were collected during the vendor tests and analyzed to provide data to support evaluation of the technologies. This paper describes the evaluation of melter feed component volatility and entrainment losses and product glass samples produced during the vendor tests. All vendors produced glasses that met minimum leach criteria established for the test glass formulations, although in many cases the waste oxide loading was less than intended. Entrainment was much lower in Joule-heated systems than in the combustion or plasma torch-fired systems. Volatility of alkali metals, halogens, B, Mo, and P were severe for non-Joule-heated systems. While losses of sulfur were significant for all systems, the volatility of other components was greatly reduced for some configurations of Joule-heated melters. Data on approaches to reduce NO{sub x} generation, resulting from high nitrate and nitrite content in the double-shell slurry feed, are also presented.

  5. Production of Jet Fuel-Range Hydrocarbons from Hydrodeoxygenation of Lignin over Super Lewis Acid Combined with Metal Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Hongliang [Department of Biological Systems Engineering, Washington State University, Richland WA 99354 USA; Current address: Center of Biomass Engineering/College of Agronomy and Biotechnology, China Agricultural University, Beijing 100193 PR China; Wang, Huamin [Pacific Northwest National Laboratory, 902 Battelle Boulevard Richland WA 99354 USA; Kuhn, Eric [National Bioenergy Center, National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Tucker, Melvin P. [National Bioenergy Center, National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Yang, Bin [Department of Biological Systems Engineering, Washington State University, Richland WA 99354 USA

    2017-11-14

    Super Lewis acids containing the triflate anion [e.g., Hf(OTf)4, Ln(OTf)3, In(OTf)3, Al(OTf)3] and noble metal catalysts (e.g., Ru/C, Ru/Al2O3) formed efficient catalytic systems to generate saturated hydrocarbons from lignin in high yields. In such catalytic systems, the metal triflates mediated rapid ether bond cleavage through selective bonding to etheric oxygens while the noble metal catalyzed subsequent hydrodeoxygenation (HDO) reactions. Near theoretical yields of hydrocarbons were produced from lignin model compounds by the combined catalysis of Hf(OTf)4 and ruthenium-based catalysts. When a technical lignin derived from a pilot-scale biorefinery was used, more than 30 wt % of the hydrocarbons produced with this catalytic system were cyclohexane and alkylcyclohexanes in the jet fuel range. Super Lewis acids are postulated to strongly interact with lignin substrates by protonating hydroxyl groups and ether linkages, forming intermediate species that enhance hydrogenation catalysis by supported noble metal catalysts. Meanwhile, the hydrogenation of aromatic rings by the noble metal catalysts can promote oxygenation reactions catalyzed by super Lewis acids.

  6. Production of Jet Fuel-Range Hydrocarbons from Hydrodeoxygenation of Lignin over Super Lewis Acid Combined with Metal Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Hongliang [Department of Biological Systems Engineering, Washington State University, Richland WA 99354 USA; Current address: Center of Biomass Engineering/College of Agronomy and Biotechnology, China Agricultural University, Beijing 100193 PR China; Wang, Huamin [Pacific Northwest National Laboratory, 902 Battelle Boulevard Richland WA 99354 USA; Kuhn, Eric [National Bioenergy Center, National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Tucker, Melvin P. [National Bioenergy Center, National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Yang, Bin [Department of Biological Systems Engineering, Washington State University, Richland WA 99354 USA

    2017-11-14

    Super Lewis acids containing the triflate anion (e.g. Hf(OTf)4, Ln(OTf)3, Al(OTf)3) and noble metal catalysts (e.g. Ru/C, Ru/Al2O3) formed efficient catalytic systems to generate saturated hydrocarbons from lignin in high yields. In such catalytic systems, the metal triflates mediated rapid ether bond cleavage via selective bonding to etheric oxygens while the noble metal catalysed subsequent hydrodeoxygenation (HDO) reactions. Near theoretical yields of hydrocarbons were produced from lignin model compounds by the combined catalysis of Hf(OTf)4 and ruthenium-based catalysts. When a technical lignin derived from a pilot-scale biorefinery was used, more than 30 wt% of the hydrocarbons produced with this catalytic system were cyclohexane and alkylcyclohexanes in the jet fuel range. Super Lewis acids are postulated to strongly interact with lignin substrates via protonating hydroxyls and ether linkages, forming intermediate species that enhance hydrogenation catalysis by supported noble metal catalysts. Meanwhile, the hydrogenation of aromatic rings by the noble metal catalysts can promote oxygenation reactions catalysed by super Lewis acids.

  7. 21 CFR 178.3530 - Isoparaffinic petroleum hydrocarbons, synthetic.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Isoparaffinic petroleum hydrocarbons, synthetic... hydrocarbons, synthetic. Isoparaffinic petroleum hydrocarbons, synthetic, may be safely used in the production... isoparaffinic petroleum hydrocarbons, produced by synthesis from petroleum gases consist of a mixture of liquid...

  8. TREATMENT OF HYDROCARBON, ORGANIC RESIDUE AND PRODUCTION CHEMICAL DAMAGE MECHANISMS THROUGH THE APPLICATION OF CARBON DIOXIDE IN NATURAL GAS STORAGE WELLS

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence J. Pekot

    2004-06-30

    Two gas storage fields were studied for this project. Overisel field, operated by Consumer's Energy, is located near the town of Holland, Michigan. Huntsman Storage Unit, operated by Kinder Morgan, is located in Cheyenne County, Nebraska near the town of Sidney. Wells in both fields experienced declining performance over several years of their annual injection/production cycle. In both fields, the presence of hydrocarbons, organic materials or production chemicals was suspected as the cause of progressive formation damage leading to the performance decline. Core specimens and several material samples were collected from these two natural gas storage reservoirs. Laboratory studies were performed to characterize the samples that were believed to be representative of a reservoir damage mechanism previously identified as arising from the presence of hydrocarbons, organic residues or production chemicals. A series of laboratory experiments were performed to identify the sample materials, use these materials to damage the flow capacity of the core specimens and then attempt to remove or reduce the induced damage using either carbon dioxide or a mixture of carbon dioxide and other chemicals. Results of the experiments showed that pure carbon dioxide was effective in restoring flow capacity to the core specimens in several different settings. However, in settings involving asphaltines as the damage mechanism, both pure carbon dioxide and mixtures of carbon dioxide and other chemicals provided little effectiveness in damage removal.

  9. Polycyclic aromatic hydrocarbons residues in Gentile di maiale, a smoked meat product typical of some mountain areas in Latina province (Central Italy

    Directory of Open Access Journals (Sweden)

    Giuseppe Carrabs

    2014-05-01

    Full Text Available Gentile di maiale is a typical meat product prepared in some traditional plants of Latina Province (Central Italy. It is obtained from dehydration, salting, smoking and ripening of swine rectum. Aim of this study was to evaluate the influence of the traditional smoking process on polycyclic aromatic hydrocarbons (PAHs content by means of high-performance liquid chromatographic/fluorescence detection. Polycyclic aromatic hydrocarbons detected in 8 samples of raw material (swine rectum and samples of smoked gentile were: benzo[a]anthracene, chrisene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a] pyrene, benzo[a,h]anthracene. Their residues were detected in all samples of finished product. European Regulation 835/2011 established two levels of PAHs content in meat products. According to first levels, in force until September 2014, only 2 out of 8 samples exceeded legal limit. According to the subsequent, more restrictive, limits all samples would be non-compliant. An improvement and a standardisation of traditional smoking procedures are recommended.

  10. Effects of solids concentration, pH and carbon addition on the production rate and composition of volatile fatty acids in prefermenters using primary sewage sludge

    DEFF Research Database (Denmark)

    Zeng, Raymond Jianxiong; Yuan, Z.; Keller, J.

    2006-01-01

    Increasing evidence is emerging that the performance of enhanced biological phosphorus removal (EBPR) systems relies on not only the total amount but also the composition of volatile fatty acids (VFAs). Domestic wastewater often contains limited amounts of VFAs with acetic acid typically being...... production with an increased propionic acid fraction. The optimal pH for prefermentation was in the range of 6-7 with significant productivity loss when pH was below 5.5. Molasses addition significantly increased the production of VFAs particularly the propionic acid. However, the fermentation rate...... the dominating species. Consequently, prefermenters are often employed to generate additional VFAs to meet the demand for carbon by EBPR and/or denitrification processes. Limited knowledge is currently available on the effects of operational conditions on the production rate and composition of VFAs...

  11. Stock market returns, volatility, and future output

    OpenAIRE

    Hui Guo

    2002-01-01

    In this article, Hui Guo shows that, if stock volatility follows an AR(1) process, stock market returns relate positively to past volatility but relate negatively to contemporaneous volatility in Merton’s (1973) Intertemporal Capital Asset Pricing Model. The model helps explain the recent finding that stock market volatility drives out returns in forecasting real gross domestic product growth because the predictive power of returns is hampered by their positive correlation with past volatilit...

  12. Pineapple (Ananas comosus L. Merr.) wine production in Angola: Characterisation of volatile aroma compounds and yeast native flora.

    Science.gov (United States)

    Dellacassa, Eduardo; Trenchs, Oriol; Fariña, Laura; Debernardis, Florencia; Perez, Gabriel; Boido, Eduardo; Carrau, Francisco

    2017-01-16

    A pineapple vinification process was conducted through inoculated and spontaneous fermentation to develop a process suitable for a quality beverage during two successive vintages in Huambo, Angola. Wines obtained with the conventional Saccharomyces cerevisiae strain, were analysed by gas chromatography, and a total of 61 volatile constituents were detected in the volatile fraction and 18 as glycosidically bound aroma compounds. Concentration levels of carbonyl and sulphur compounds were in agreement with the limited information reported about pineapple fruits of other regions. We report, for the first time in pineapple wines, the presence of significant concentrations of lactones, ketones, terpenes, norisoprenoids and a variety of volatile phenols. Eight native yeast strains were isolated from spontaneous batches. Further single-strain fermentations allowed us to characterise their suitability for commercial fermentation. Three native strains (Hanseniaspora opuntiae, H. uvarum and Meyerozyma guilliermondii) were selected with sensory potential to ferment pineapple fruits with increased flavour diversity. Results obtained here contribute to a better understanding of quality fermentation alternatives of this tropical fruit in subtropical regions. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Syngas Upgrading to Hydrocarbon Fuels Technology Pathway

    Energy Technology Data Exchange (ETDEWEB)

    Talmadge, M.; Biddy, M.; Dutta, A.; Jones, S.; Meyer, A.

    2013-03-01

    This technology pathway case investigates the upgrading of woody biomass derived synthesis gas (syngas) to hydrocarbon biofuels. While this specific discussion focuses on the conversion of syngas via a methanol intermediate to hydrocarbon blendstocks, there are a number of alternative conversion routes for production of hydrocarbons through a wide array of intermediates from syngas. Future work will also consider the variations to this pathway to determine the most economically viable and lowest risk conversion route. Technical barriers and key research needs have been identified that should be pursued for the syngas-to-hydrocarbon pathway to be competitive with petroleum-derived gasoline-, diesel- and jet-range hydrocarbon blendstocks.

  14. Effect of organic loading rate on methane and volatile fatty acids productions from anaerobic treatment of palm oil mill effluent in UASB and UFAF reactors

    Directory of Open Access Journals (Sweden)

    Sumate Chaiprapat

    2007-05-01

    Full Text Available Anaerobic treatment of palm oil mill effluent (POME with the separation of the acidogenic and methanogenic phase was studied in an up-flow anaerobic sludge blanket (UASB reactor and an up-flowanaerobic filter (UFAF reactor. Furthermore, the effect of OLR on methane and volatile fatty acid productions in UASB and UFAF reactors was investigated. In this research, UASB as acidogenic reactor wasused for volatile fatty acid production and UFAF as methanogenic reactor was used for methane production. Therefore, POME without pH adjustment was used as influent for the UASB reactor. Moreover, the syntheticwastewater with pH adjustment to 6.00 was fed into the UFAF reactor. The inoculum source for both reactors was the combination of POME sludge collected from the CSTR of a POME treatment plant and granulesludge collected from the UASB reactor of a frozen sea food industry treatment plant. During experimental operation, the organic loading rate (OLR was gradually increased from 2.50 to 17.5 g COD/l/day in theUASB reactor and 1.10 to 10.0 g COD/l/day in the UFAF reactor. Consequently, hydraulic retention time (HRT ranged from 20.0 to 2.90 days in the UASB reactor and from 13.5 to 1.50 days in the UFAF reactor.The result showed that the COD removal efficiency from both reactors was greater than 60.0%. In addition, the total volatile fatty acids increased with the increasing OLR. The total volatile fatty acids and acetic acidproduction in the UASB reactor reached 5.50 g/l and 4.90 g/l, respectively at OLR of 17.5 g COD/l/day and HRT of 2.90 days before washout was observed. In the UFAF reactor, the methane and biogas productionincreased with increasing OLR until an OLR of 7.50 g COD/l/day. However, the methane and biogas production significantly decreased when OLR increased up to 10.0 g COD/l/day. Therefore, the optimum OLR inthe laboratory-scale UASB and UFAF reactors were concluded to be 15.5 and 7.50 g COD/l/day, respectively.

  15. The Paleobiosphere: a novel device for the in vivo testing of hydrocarbon producing-utilizing microorganisms.

    Science.gov (United States)

    Strobel, Gary; Booth, Eric; Schaible, George; Mends, Morgan Tess; Sears, Joe; Geary, Brad

    2013-04-01

    The construction and testing of a unique instrument, the Paleobiosphere, which mimics some of the conditions of the ancient earth, is described. The instrument provides an experimental testing system for determining if certain microbes, when provided an adequate environment, can degrade biological materials to produce fuel-like hydrocarbons in a relatively short time frame that become trapped by the shale. The conditions selected for testing included a particulate Montana shale (serving as the "Trap Shale"), plant materials (leaves and stems of three extant species whose origins are in the late Cretaceous), a water-circulating system, sterile air, and a specially designed Carbotrap through which all air was passed as exhaust and volatile were hydrocarbons trapped. The fungus for initial testing was Annulohypoxylon sp., isolated as an endophyte of Citrus aurantifolia. It produces, in solid and liquid media, a series of hydrocarbon-like molecules. Some of these including 1,8-cineole, 2-butanone, propanoic acid, 2-methyl-, methyl ester, benzene (1-methylethyl)-, phenylethyl alcohol, benzophenone and azulene, 1,2,3,5,6,7,8,8a-octahydro-1,4-dimethyl-7-(1-methylethenyl), [1S-(1α,7α,8aβ)]. These were the key signature compounds used in an initial Paleobiosphere test. After 3 weeks, incubation, the volatiles associated with the harvested "Trap Shale" included each of the signature substances as well as other fungal-associated products: some indanes, benzene derivatives, some cyclohexanes, 3-octanone, naphthalenes and others. The fungus thus produced a series of "Trap Shale" products that were representative of each of the major classes of hydrocarbons in diesel fuel (Mycodiesel). Initial tests with the Paleobiosphere offer some evidence for a possible origin of hydrocarbons trapped in bentonite shale. Thus, with modifications, numerous other tests can also be designed for utilization in the Paleobiosphere.

  16. Aqueous-phase oxidation of green leaf volatiles by hydroxyl radical as a source of SOA: Product identification from methyl jasmonate and methyl salicylate oxidation

    Science.gov (United States)

    Hansel, Amie K.; Ehrenhauser, Franz S.; Richards-Henderson, Nicole K.; Anastasio, Cort; Valsaraj, Kalliat T.

    2015-02-01

    Green leaf volatiles (GLVs) are a group of biogenic volatile organic compounds (BVOCs) released into the atmosphere by vegetation. BVOCs produce secondary organic aerosol (SOA) via gas-phase reactions, but little is known of their aqueous-phase oxidation as a source of SOA. GLVs can partition into atmospheric water phases, e.g., fog, mist, dew or rain, and be oxidized by hydroxyl radicals (˙OH). These reactions in the liquid phase also lead to products that have higher molecular weights, increased polarity, and lower vapor pressures, ultimately forming SOA after evaporation of the droplet. To examine this process, we investigated the aqueous, ˙OH-mediated oxidation of methyl jasmonate (MeJa) and methyl salicylate (MeSa), two GLVs that produce aqueous-phase SOA. High performance liquid chromatography/electrospray ionization mass spectrometry (HPLC-ESI-MS) was used to monitor product formation. The oxidation products identified exhibit higher molecular mass than their parent GLV due to either dimerization or the addition of oxygen and hydroxyl functional groups. The proposed structures of potential products are based on mechanistic considerations combined with the HPLC/ESI-MS data. Based on the structures, the vapor pressure and the Henry's law constant were estimated with multiple methods (SPARC, SIMPOL, MPBPVP, Bond and Group Estimations). The estimated vapor pressures of the products identified are significantly (up to 7 orders of magnitude) lower than those of the associated parent compounds, and therefore, the GLV oxidation products may remain as SOA after evaporation of the water droplet. The contribution of the identified oxidation products to SOA formation is estimated based on measured HPLC-ESI/MS responses relative to previous aqueous SOA mass yield measurements.

  17. Predicting refinery effluent toxicity on the basis of hydrocarbon composition determined by GCxGC analysis

    Energy Technology Data Exchange (ETDEWEB)

    Whale, G. [and others

    2013-04-15

    A high resolution analytical method for determining hydrocarbon blocks in petroleum products by comprehensive two-dimensional gas chromatography (GCxGC) was used for the analysis of petroleum hydrocarbons extracted from refinery effluents. From 105 CONCAWE refineries in Europe 111 refinery effluents were collected in the period June 2008 to March 2009 (CONCAWE, 2010). The effluents were analysed for metals, standard effluent parameters (including Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD), oil in water (OiW), GCxGC speciated hydrocarbons, BTEX (Benzene, Toluene, Ethylbenzene, and Xylenes) and volatile organic compounds. This report describes the subsequent analysis of the GCxGC data, as described in hydrocarbon blocks, and uses the PETROTOX model, to predict the environmental toxicity (i.e. ecotoxicity) of the discharged effluents. A further analysis was undertaken to address the potential environmental impact of these predicted effects initially using default dilution factors and then,when necessary site specific factors. The report describes all the methods used to arrive at the predictions, and shows that for the majority of refinery effluents direct toxicity effects in the effluents are not anticipated. Furthermore, when applying either the EU Risk Assessment Technical Guidance Document (TGD) default dilution factors or site specific dilution factors, none of the refineries are predicted to exerting either acute or chronic toxicity to organisms in the receiving aquatic environment, based on their hydrocarbon composition present in the effluent samples.

  18. Changes on physico-chemical, textural, lipolysis and volatile compounds during the manufacture of dry-cured foal "cecina".

    Science.gov (United States)

    Lorenzo, José M

    2014-01-01

    The changes in the physico-chemical and textural properties, lipolysis and volatile compounds during the manufacture of dry-cured foal "cecina" were studied. The pH increased during the last stages of processing but gradually declined over the curing period. TBARS values, hardness and chewiness increased with processing time from 0.14, 2.74 and 0.83 to 3.49 mg malonaldehyde/kg, 20.33 kg and 5.05 kg∗mm, respectively. Ripening time also affected the colour parameters: lightness (L*), redness (a*) and yellowness (b*) (Pfoal "cecina", including esters, aldehydes, aliphatic hydrocarbons, branched hydrocarbons, alcohols, aromatic hydrocarbons, furans, ketones. Aldehydes reached their maximum level at the end of the post-salting stage. In the final product, esters became the dominant chemical compounds. © 2013.

  19. Effects of potassium sorbate and Lactobacillus plantarum MTD1 on production of ethanol and other volatile organic compounds in corn silage

    DEFF Research Database (Denmark)

    Hafner, Sasha D.; Windle, Michelle; Merrill, Caitlyn

    2015-01-01

    was to evaluate the effect of additives on production of nine silage VOC in corn silage, including compounds thought to contribute to poor air quality or affect feed intake (alcohols: methanol, ethanol, 1-propanol; esters: methyl acetate, ethyl acetate, ethyl lactate; and aldehydes: acetaldehyde, valeraldehyde......Ethanol and other volatile organic compounds (VOC) are formed during ensiling, and may contribute to poor air quality and reduce feed intake by animals. Chemical or biological additives may help address these problems by reducing production of VOC during ensiling. The purpose of this study......); and a combination of both additives were compared to a control treatment, which received only water. Silage was made in bucket silos which were opened after 119 days of ensiling. Potassium sorbate reduced ethanol production by >70% and ethyl lactate and ethyl acetate by >65% whether or not L. plantarum was included...

  20. Photo-oxidation of low-volatility organics found in motor vehicle emissions: production and chemical evolution of organic aerosol mass.

    Science.gov (United States)

    Miracolo, Marissa A; Presto, Albert A; Lambe, Andrew T; Hennigan, Christopher J; Donahue, Neil M; Kroll, Jesse H; Worsnop, Douglas R; Robinson, Allen L

    2010-03-01

    Recent research has proposed that low-volatility organic vapors are an important class of secondary organic aerosol (SOA) precursors. Mixtures of low-volatility organics were photo-oxidized in a smog chamber under low- and high-NO(x) conditions. Separate experiments addressed emission surrogates (diesel fuel and motor oil) and single components (n-pentacosane). Both diesel fuel and motor oil are major components of exhaust from diesel engines. Diesel fuel is a complex mixture of intermediate volatility organic compounds (IVOCs), whereas motor oil is a complex mixture of semivolatile organic compounds (SVOCs). IVOCs exist exclusively in the vapor phase, while SVOCs exist in both the aerosol and vapor phase. Oxidation of SVOC vapors (motor oil and n-pentacosane) creates substantial SOA, but this SOA is largely offset by evaporation of primary organic aerosol (POA). The net effect is a cycling or pumping of SVOCs between the gas and particle phases, which creates more oxygenated organic aerosol (OA) but little new OA mass. Since gas-phase reactions are much faster than heterogeneous ones, the processing of SVOC vapors likely contributes to the production of highly oxidized OA. The interplay between gas-particle partitioning and chemistry also blurs traditional definitions of POA and SOA. Photo-oxidation of diesel fuel (IVOCs) rapidly creates substantial new OA mass, similar to published aging experiments with dilute diesel exhaust. However, aerosol mass spectrometer (AMS) data indicated that the SOA formed from emission surrogates is less oxidized than either the oxygenated organic aerosol (OOA) measured in the atmosphere or SOA formed from the photo-oxidation of dilute diesel exhaust. Therefore, photo-oxidation of IVOCs helps explain the substantial SOA mass produced from aging diesel exhaust, but some component is missing from these emission surrogate experiments that leads to the rapid production of highly oxygenated SOA.

  1. [On the problem of the study of the chemical air pollution with chlororganic hydrocarbons at productions of polyvinyl chloride and epichlorohydrin].

    Science.gov (United States)

    Taranenko, N A; Meshakova, N M; Zhurba, O M; Telezhkin, V V

    2014-01-01

    Hygienic assessment of working conditions at the chemical productions of polyvinyl chloride (PVC) and epichlorohydrin (EPCH) in East Siberia has shown that the employees are exposed to the chlororganic hydrocarbons of hazard category 1-2, out of them there were found to be more toxical pollutants such as vinyl chloride, 1.2-dicloroethane in the production of polyvinyl chloride; allyl chloride and epichlorohydrin in the production of epichlorohydrin. Multistageness of the technological processes, the absence of the isolation of main stages of the technological processes as well as the heating microclimate contribute to the chemical pollution of the air environment. In spite of the significant improvement of the hygienic situation at the productions mentioned in the recent 10 years according to the chemical factor due to the introduction of the complex of curative measures, the working conditions of the employees still belonged to the harmful category. According to the content of the harmful chemical substances in the air of the working zone and the parameters of microclimate, the working conditions of the employees working at the production of epichlorohydrin and in the shop of vinyl chloride production must be qualified as the harmful ones of the first category of the hazard and danger (Class 3.1), in the production shop for PVC- as the harmful ones which correspond to the second category of the hazard and danger (Class 3.2).

  2. Photobioreactor cultivation and catalytic pyrolysis of the microalga Desmodesmus communis (Chlorophyceae) for hydrocarbons production by HZSM-5 zeolite cracking.

    Science.gov (United States)

    Conti, Roberto; Pezzolesi, Laura; Pistocchi, Rossella; Torri, Cristian; Massoli, Patrizio; Fabbri, Daniele

    2016-12-01

    The study evaluated the growth of Desmodesmus communis on column photobioreactor and its thermochemical treatment by catalytic pyrolysis using HZSM-5 zeolite. D. communis showed good results in terms of growth (0.05gL -1 d -1 ). Analytical pyrolysis of original algae and derived bio-oil mixed with zeolite was used as a screening method in order to gather information on the cracking process. Preparative pyrolysis on bench scale reactor was performed on algae biomass over a zeolite bed at 1:10 ratio (wt/wt). Py-GC-MS of biomass/catalyst mixture showed that the denitrogenation/deoxygenation increased with increasing zeolite load from 1:5 to 1:20 ratio and became significant at 1:10 ratio. The composition observed by analytical pyrolysis was featured by the predominance of alkylated monoaromatic hydrocarbons. The scaling-up to bench scale confirmed the results obtained with analytical pyrolysis in terms of monoaromatic hydrocarbons. However, low yield of catalytic oil (8% by weight) was observed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Effect of ozonation of swimming pool water on formation of volatile disinfection by-products - A laboratory study

    DEFF Research Database (Denmark)

    Hansen, Kamilla Marie Speht; Spiliotopoulou, Aikaterini; Cheema, Waqas Akram

    2016-01-01

    Ozonation experiments were performed using unchlorinated tap water used for filling municipal swimming pools, actual pool water and pool water polluted by addition of fresh tap water and artificial body fluid to evaluate ozone kinetics and water quality effects on formation of volatile disinfection...... was approximated 17-19 min in all samples. Subsequent chlorination revealed ozone removed reactivity of dissolved organic carbon toward chlorine for tap and polluted pool water, decreasing formation rate of trihalomethanes (TTHM). In pool water higher rates of TTHM formation was observed after the initial ozone...

  4. Effect of O(2)-CO(2) enriched atmospheres on microbiological growth and volatile metabolite production in packaged cooked peeled gray shrimp (Crangon crangon).

    Science.gov (United States)

    Noseda, Bert; Goethals, Joke; De Smedt, Lies; Dewulf, Jo; Samapundo, Simbarashe; Van Langenhove, Herman; Devlieghere, Frank

    2012-11-01

    This study evaluated the effect of modified atmospheres (MAs) with different O(2) concentrations on microbial growth and volatile metabolite production in gray shrimp (Crangon crangon) during storage at 4 °C. Eight MAs were evaluated in total. Four of the MAs evaluated were without CO(2): 0/0/100, 0/10/90, 0/30/70, 0/50/50 (% CO(2)/O(2)/N(2)) whilst the other four MAs all contained 50% CO(2): 50/0/50, 50/10/40, 50/30/20, 50/50/0 (% CO(2)/O(2)/N(2)). Volatile spoilage metabolites were identified by thermal desorption GC-MS and quantified during storage by selective ion flow tube mass spectrometry (SIFT-MS). In comparison to microbial growth observed with an atmosphere of 100% N(2), microbial growth was stimulated by the addition of O(2) in the MAP in the absence of CO(2.) Under these conditions the total psychrotrophic counts exceeded 7 log cfug(-1) after just 3 days of storage. However, in the presence of 50% CO(2) the total psychrotrophic count exceeded 7 log cfug(-1) after 5 days of storage. The combination of 50% CO(2) and 50% O(2) significantly inhibited microbial growth. For this MA condition, a diminishing effect on the production of metabolites was also observed, especially for amines and sulfur compounds, which constituted the major fraction of components causing the offensive odor. Copyright © 2012 Elsevier B.V. All rights reserved.

  5. A Polymer-Rich Re-deposition Technique for Non-volatile Etching By-products in Reactive Ion Etching Systems

    Science.gov (United States)

    Limcharoen, A.; Pakpum, C.; Limsuwan, P.

    2013-07-01

    Re-deposition is a non-volatile etching by-product in reactive ion etching systems that is well known to cause dirt on etching work. In this study, we propose a novel etching method called the polymer-rich re-deposition technique, used particularly for improving the etched sidewall where the re-deposition is able to accumulate. This technique works by allowing the accumulated re-deposition on the etched sidewall to have a higher polymer species than the new compounds in the non-volatile etching by-product. The polymer-rich re-deposition is easy to remove along with the photo-resist mask residual at the photo-resist strip step using an isopropyl alcohol-based solution. The traditional, additional cleaning process step used to remove the re-deposition material is not required anymore, so this reduces the overall processing time. The technique is demonstrated on an Al2O3-TiC substrate by C4F8 plasma, and the EDX spectrum confirms that the polymer re-deposition has C and F atoms as the dominant atoms, suggesting that it is a C—F polymer re-deposition.

  6. A phycocyanin·phellandrene synthase fusion enhances recombinant protein expression and β-phellandrene (monoterpene) hydrocarbons production in Synechocystis (cyanobacteria).

    Science.gov (United States)

    Formighieri, Cinzia; Melis, Anastasios

    2015-11-01

    Cyanobacteria can be exploited as photosynthetic platforms for heterologous generation of terpene hydrocarbons with industrial applications. Transformation of Synechocystis and heterologous expression of the β-phellandrene synthase (PHLS) gene alone is necessary and sufficient to confer to Synechocystis the ability to divert intermediate terpenoid metabolites and to generate the monoterpene β-phellandrene during photosynthesis. However, terpene synthases, including the PHLS, have a slow Kcat (low Vmax) necessitating high levels of enzyme concentration to enable meaningful rates and yield of product formation. Here, a novel approach was applied to increase the PHLS protein expression alleviating limitations in the rate and yield of β-phellandrene product generation. Different PHLS fusion constructs were generated with the Synechocystis endogenous cpcB sequence, encoding for the abundant in cyanobacteria phycocyanin β-subunit, expressed under the native cpc operon promoter. In one of these constructs, the CpcB·PHLS fusion protein accumulated to levels approaching 20% of the total cellular protein, i.e., substantially higher than expressing the PHLS protein alone under the same endogenous cpc promoter. The CpcB·PHLS fusion protein retained the activity of the PHLS enzyme and catalyzed β-phellandrene synthesis, yielding an average of 3.2 mg product g(-1) dry cell weight (dcw) versus the 0.03 mg g(-1)dcw measured with low-expressing constructs, i.e., a 100-fold yield improvement. In conclusion, the terpene synthase fusion-protein approach is promising, as, in this case, it substantially increased the amount of the PHLS in cyanobacteria, and commensurately improved rates and yield of β-phellandrene hydrocarbons production in these photosynthetic microorganisms. Copyright © 2015 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  7. Relationship between sensory attributes and volatile compounds of polish dry-cured loin

    Directory of Open Access Journals (Sweden)

    Ewa Górska

    2017-05-01

    Full Text Available Objective The aim of this work was to determine the relationship between objective sensory descriptors and volatile flavour compound composition of Polish traditional dry-cured loin. Methods The volatile compounds were investigated by using solid phase microextraction (SPME and gas chromatography–mass spectrometry (GC–MS. For sensory assessment, the quantitative descriptive analysis (QDA method was used. Results A total of 50 volatile compounds were found and assigned to 17 chemical families. Most of the detected volatile compounds derived from smoking, lipid oxidative reactions and seasoning (46.8%, 21.7%, and 18.9%, respectively. The dominant compounds were: aromatic hydrocarbon (toluene; alkanes (hexane, heptane, and 2,2,4-trimethylpentane; aldehyde (hexanal; alcohol (2-furanmethanol; ketone (3-hydroxy-2-butanone; phenol (guaiacol; and terpenes (eucalyptol, cymene, γ-terpinen, and limonene. Correlation analysis showed that some compounds derived from smoking were positively correlated with the intensity of cured meat odour and flavour and negatively with the intensity of dried meat odour and flavour, while terpenes were strongly correlated with odour and flavour of added spices. Conclusion The analysed dry-cured loins were characterized by specific and unique sensory profile. Odour and flavour of studied loins was mainly determined by volatile compounds originating from smoking, seasoning and lipid oxidation. Obtained results suggest that smoking process is a crucial stage during Polish traditional dry-cured loins production.

  8. Relationship between sensory attributes and volatile compounds of polish dry-cured loin

    Science.gov (United States)

    Górska, Ewa; Nowicka, Katarzyna; Jaworska, Danuta; Przybylski, Wiesław; Tambor, Krzysztof

    2017-01-01

    Objective The aim of this work was to determine the relationship between objective sensory descriptors and volatile flavour compound composition of Polish traditional dry-cured loin. Methods The volatile compounds were investigated by using solid phase microextraction (SPME) and gas chromatography–mass spectrometry (GC–MS). For sensory assessment, the quantitative descriptive analysis (QDA) method was used. Results A total of 50 volatile compounds were found and assigned to 17 chemical families. Most of the detected volatile compounds derived from smoking, lipid oxidative reactions and seasoning (46.8%, 21.7%, and 18.9%, respectively). The dominant compounds were: aromatic hydrocarbon (toluene); alkanes (hexane, heptane, and 2,2,4-trimethylpentane); aldehyde (hexanal); alcohol (2-furanmethanol); ketone (3-hydroxy-2-butanone); phenol (guaiacol); and terpenes (eucalyptol, cymene, γ-terpinen, and limonene). Correlation analysis showed that some compounds derived from smoking were positively correlated with the intensity of cured meat odour and flavour and negatively with the intensity of dried meat odour and flavour, while terpenes were strongly correlated with odour and flavour of added spices. Conclusion The analysed dry-cured loins were characterized by specific and unique sensory profile. Odour and flavour of studied loins was mainly determined by volatile compounds originating from smoking, seasoning and lipid oxidation. Obtained results suggest that smoking process is a crucial stage during Polish traditional dry-cured loins production. PMID:27456422

  9. Formic and Acetic Acids in Degradation Products of Plant Volatiles Elicit Olfactory and Behavioral Responses from an Insect Vector.

    Science.gov (United States)

    George, Justin; Robbins, Paul S; Alessandro, Rocco T; Stelinski, Lukasz L; Lapointe, Stephen L

    2016-05-01

    Volatile phytochemicals play a role in orientation by phytophagous insects. We studied antennal and behavioral responses of the Asian citrus psyllid, Diaphorina citri, vector of the citrus greening disease pathogen. Little or no response to citrus leaf volatiles was detected by electroantennography. Glass cartridges prepared with β-ocimene or citral produced no response initially but became stimulatory after several days. Both compounds degraded completely in air to a number of smaller molecules. Two peaks elicited large antennal responses and were identified as acetic and formic acids. Probing by D. citri of a wax substrate containing odorants was significantly increased by a blend of formic and acetic acids compared with either compound separately or blends containing β-ocimene and/or citral. Response surface modeling based on a 4-component mixture design and a 2-component mixture-amount design predicted an optimal probing response on wax substrate containing a blend of formic and acetic acids. Our study suggests that formic and acetic acids play a role in host selection by D. citri and perhaps by phytophagous insects in general even when parent compounds from which they are derived are not active. These results have implications for the investigation of arthropod olfaction and may lead to elaboration of attract-and-kill formulations to reduce nontarget effects of chemical control in agriculture. Published by Oxford University Press on behalf of US Government 2016.

  10. Volatile fatty acids production from food waste: effects of pH, temperature, and organic loading rate.

    Science.gov (United States)

    Jiang, Jianguo; Zhang, Yujing; Li, Kaimin; Wang, Quan; Gong, Changxiu; Li, Menglu

    2013-09-01

    The effects of pH, temperature, and organic loading rate (OLR) on the acidogenesis of food waste have been determined. The present study investigated their effects on soluble chemical oxygen demand (SCOD), volatile fatty acids (VFAs), volatile solids (VS), and ammonia nitrogen (NH4(+)-N). Both the concentration and yield of VFAs were highest at pH 6.0, acetate and butyrate accounted for 77% of total VFAs. VFAs concentration and the VFA/SCOD ratio were highest, and VS levels were lowest, at 45 °C, but the differences compared to the values at 35 °C were slight. The concentrations of VFAs, SCOD, and NH4(+)-N increased as OLR increased, whereas the yield of VFAs decreased from 0.504 at 5 g/Ld to 0.306 at 16 g/Ld. Acetate and butyrate accounted for 60% of total VFAs. The percentage of acetate and valerate increased as OLR increased, whereas a high OLR produced a lower percentage of propionate and butyrate. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Key volatile compounds in red koji-shochu, a Monascus-fermented product, and their formation steps during fermentation.

    Science.gov (United States)

    Rahayu, Yen Yen Sally; Yoshizaki, Yumiko; Yamaguchi, Keiko; Okutsu, Kayu; Futagami, Taiki; Tamaki, Hisanori; Sameshima, Yoshihiro; Takamine, Kazunori

    2017-06-01

    Red koji, which refers the solid culture grown koji mold on the steamed rice, is one of the ingredients of Asian fermented foods including the Japanese spirit shochu. This study was aimed at elucidating the characteristic flavor and key volatile compounds of red koji-shochu as well as the mechanism of their formation. Sensory evaluation showed that red koji-shochu has the distinctive flavors cheese, sour, milky, and oily. Fifteen key volatile compounds of red koji-shochu were identified by gas chromatography-mass spectrometry and high-performance liquid chromatography, and by comparison between red koji-shochu and white koji-shochu, as another typical shochu. The mash analysis revealed that ketone compounds and short-chain acids derive from red koji. Furthermore, although other key compounds were produced by yeast, it is highly likely that their concentrations were affected directly or indirectly by the high activities of protease and lipase in red koji. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. High molecular weight non-polar hydrocarbons as pure model substances and in motor oil samples can be ionized without fragmentation by atmospheric pressure chemical ionization mass spectrometry.

    Science.gov (United States)

    Hourani, Nadim; Kuhnert, Nikolai

    2012-10-15

    High molecular weight non-polar hydrocarbons are still difficult to detect by mass spectrometry. Although several studies have targeted this problem, lack of good self-ionization has limited the ability of mass spectrometry to examine these hydrocarbons. Failure to control ion generation in the atmospheric pressure chemical ionization (APCI) source hampers the detection of intact stable gas-phase ions of non-polar hydrocarbon in mass spectrometry. Seventeen non-volatile non-polar hydrocarbons, reported to be difficult to ionize, were examined by an optimized APCI methodology using nitrogen as the reagent gas. All these analytes were successfully ionized as abundant and intact stable [M-H](+) ions without the use of any derivatization or adduct chemistry and without significant fragmentation. Application of the method to real-life hydrocarbon mixtures like light shredder waste and car motor oil was demonstrated. Despite numerous reports to the contrary, it is possible to ionize high molecular weight non-polar hydrocarbons by APCI, omitting the use of additives. This finding represents a significant step towards extending the applicability of mass spectrometry to non-polar hydrocarbon analyses in crude oil, petrochemical products, waste or food. Copyright © 2012 John Wiley & Sons, Ltd.

  13. Effects of organic loading rate on hydrogen and volatile fatty acid production and microbial community during acidogenic hydrogenesis in a continuous stirred tank reactor using molasses wastewater.

    Science.gov (United States)

    Yun, J; Cho, K-S

    2016-12-01

    Microbial community associated with hydrogen production and volatile fatty acids (VFAs) accumulation was characterized in acidogenic hydrogenesis using molasses wastewater as a feedstock. Hydrogen and VFAs production were measured under an organic loading rate (OLR) from 19 to 35 g-COD l(-1)  day(-1) . The active microbial community was analysed using RNA-based massively parallel sequencing technique, and their correlation patterns were analysed using networking analysis. The continuous stirred tank reactor achieved stable hydrogen production at different OLR conditions, and the maximum hydrogen production rate (HPR) was 1·02 L-H2  l(-1)  day(-1) at 31·0 g-COD l(-1)  day(-1) . Butyrate (50%) and acetate (38%) positively increased with increase in OLR. Total VFA production stayed around 7135 mg l(-1) during the operation period. Although Clostridiales and Lactobacillales were relatively abundant, the HPR was positively associated with Pseudomonadaceae and Micrococcineae. Total VFA and acetate, butyrate and propionate concentrations were positively correlated with lactic acid bacteria (LAB) such as Bacillales, Sporolactobacillus and Lactobacillus. The close relationship between Pseudomonadaceae and Micrococcineae, and LAB play important roles for stable hydrogen and VFA production from molasses wastewater. Microbial information on hydrogen and VFA production can be useful to design and operate for acidogenic hydrogenesis using high strength molasses wastewater. © 2016 The Society for Applied Microbiology.

  14. Assessment of soil pollution based on total petroleum hydrocarbons and individual oil substances.

    Science.gov (United States)

    Pinedo, J; Ibáñez, R; Lijzen, J P A; Irabien, Á

    2013-11-30

    Different oil products like gasoline, diesel or heavy oils can cause soil contamination. The assessment of soils exposed to oil products can be conducted through the comparison between a measured concentration and an intervention value (IV). Several national policies include the IV based on the so called total petroleum hydrocarbons (TPH) measure. However, the TPH assessment does not indicate the individual substances that may produce contamination. The soil quality assessment can be improved by including common hazardous compounds as polycyclic aromatic hydrocarbons (PAHs) and aromatic volatile hydrocarbons like benzene, toluene, ethylbenzene and xylenes (BTEX). This study, focused on 62 samples collected from different sites throughout The Netherlands, evaluates TPH, PAH and BTEX concentrations in soils. Several indices of pollution are defined for the assessment of individual variables (TPH, PAH, B, T, E, and X) and multivariables (MV, BTEX), allowing us to group the pollutants and simplify the methodology. TPH and PAH concentrations above the IV are mainly found in medium and heavy oil products such as diesel and heavy oil. On the other hand, unacceptable BTEX concentrations are reached in soils contaminated with gasoline and kerosene. The TPH assessment suggests the need for further action to include lighter products. The application of multivariable indices allows us to include these products in the soil quality assessment without changing the IV for TPH. This work provides useful information about the soil quality assessment methodology of oil products in soils, focussing the analysis into the substances that mainly cause the risk. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. A Response Surface Methodology study on the role of factors affecting growth and volatile phenol production by Brettanomyces bruxellensis ISA 2211 in wine.

    Science.gov (United States)

    Chandra, M; Barata, A; Ferreira-Dias, S; Malfeito-Ferreira, M; Loureiro, V

    2014-09-01

    The present study was aimed at determining the effect of glucose, ethanol and sulphur dioxide on the growth and volatile phenol production by Brettanomyces bruxellensis in red wines using a response surface methodology approach. Sulphur dioxide proved to have a significant (p sulphite concentrations. However, when cells were inactivated by sulphur dioxide and ethanol, glucose (up to 10 g L(-1)) did not prevent cell death. Production of more than 50 μg L(-1) day(-1) of 4-ethylphenol was only observed in the presence of high numbers (10(6) CFU mL(-1)) of culturable cells, being stimulated by increasing glucose concentrations. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Polycyclic aromatic hydrocarbons (PAHs) in ambient aerosols from Beijing: characterization of low volatile PAHs by positive-ion atmospheric pressure photoionization (APPI) coupled with Fourier transform ion cyclotron resonance.

    Science.gov (United States)

    Jiang, Bin; Liang, Yongmei; Xu, Chunming; Zhang, Jingyi; Hu, Miao; Shi, Quan

    2014-05-06

    Aromatic fractions derived from aerosol samples were characterized by gas chromatography and mass spectrometry (GC-MS), high temperature simulated distillation (SIMDIS), and positive-ion atmospheric pressure photoionization (APPI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS), respectively. It was found that about 27 wt % compounds in aromatic fractions could not be eluted from a GC column and some large molecule PAHs were neglected in GC-MS analysis. APPI FT-ICR MS was proven to be a powerful approach for characterizing the molecular composition of aromatics, especially for the large molecular species. An aromatic sample from Beijing urban aerosol was successfully characterized by APPI FT-ICR MS. Results showed that most abundant aromatic compounds in PM2.5 (particles with aerodynamic diameter ≤ 2.5 μm) were highly condensed hydrocarbons with 4-8 aromatic rings and their homologues with very short alkyl chains. Furthermore, heteroatom-containing hydrocarbons were found as the significant components of the aromatic fractions: O1, O2, N1, and S1 class species with 10-28 DBEs (double bond equivalents) and 14-38 carbon numbers were identified by APPI FT-ICR MS. The heteroatom PAHs had similar DBEs and carbon number distribution as regular PAHs.

  17. Pricing Volatility Referenced Assets

    Directory of Open Access Journals (Sweden)

    Alan De Genaro Dario

    2006-12-01

    Full Text Available Volatility swaps are contingent claims on future realized volatility. Variance swaps are similar instruments on future realized variance, the square of future realized volatility. Unlike a plain vanilla option, whose volatility exposure is contaminated by its asset price dependence, volatility and variance swaps provide a pure exposure to volatility alone. This article discusses the risk-neutral valuation of volatility and variance swaps based on the framework outlined in the Heston (1993 stochastic volatility model. Additionally, the Heston (1993 model is calibrated for foreign currency options traded at BMF and its parameters are used to price swaps on volatility and variance of the BRL / USD exchange rate.

  18. Effects of volatile fatty acids in biohydrogen effluent on biohythane production from palm oil mill effluent under thermophilic condition

    Directory of Open Access Journals (Sweden)

    Chonticha Mamimin

    2017-09-01

    Conclusion: Preventing the high concentration of butyric acid, and propionic acid in the hydrogenic effluent could enhance methane production in two-stage anaerobic digestion for biohythane production.

  19. Medium- and low-volatile organic compounds generated by laser tissue interaction

    Science.gov (United States)

    Spleiss, Martin; Weber, Lothar W.

    1996-12-01

    Different tissue samples have been irradiated with surgical XeCl- and CO2-lasers. The generated laser plume was sampled and analyzed concerning medium and low volatile organic compounds. Differences in the composition of the pyrolysis products in dependance of tissues and lasers are presented. Quantification of aromatic hydrocarbons was carried out. It is obvious that the ratios between the single aromatic hydrocarbons gave hints at the temperatures of the laser tissue interaction process. Some aromatic hydrocarbons were typical high temperature products like phenylacetylene, whereas toluene could be found at lower temperatures with comparable high concentration. Two special classes of compounds, presumed by Curie point pyrolysis of proteins and not yet verified by synthesis, were identified in the aerosol of the CO2-laser. Probably five different amino acids might be the precursors of these compounds whereas by Curie point pyrolysis only three amino acids were reported as precursors. The particular debris which was sampled separately on glass fiber filters was extracted with different solvents. Several compounds absorbed at the particles could be identified and will be discussed. In the polar acetone extract some of main compounds remained unknown. A special clean-up procedure for polycyclic aromatic hydrocarbons (PAH) was carried out. Qualitative and quantitative results of the PAH analysis are presented. The results are compared with the results of other working groups.

  20. Carbon Catabolite Repression Regulates the Production of the Unique Volatile Sodorifen of Serratia plymuthica 4Rx13

    Directory of Open Access Journals (Sweden)

    Nancy Magnus

    2017-12-01

    Full Text Available Microorganisms are capable of synthesizing a plethora of secondary metabolites including the long-overlooked volatile organic compounds. Little knowledge has been accumulated regarding the regulation of the biosynthesis of such mVOCs. The emission of the unique compound sodorifen of Serratia plymuthica isolates was significantly reduced in minimal medium with glucose, while succinate elevated sodorifen release. The hypothesis of carbon catabolite repression (CCR acting as a major control entity on the synthesis of mVOCs was proven by genetic evidence. Central components of the typical CCR of Gram-negative bacteria such as the adenylate cyclase (CYA, the cAMP binding receptor protein (CRP, and the catabolite responsive element (CRE were removed by insertional mutagenesis. CYA, CRP, CRE1 mutants revealed a lower sodorifen release. Moreover, the emission potential of other S. plymuthica isolates was also evaluated.

  1. Phase behaviour in water/hydrocarbon mixtures involved in gas production systems; etude des equilibres des systemes: eau-hydrocarbures-gaz acides dans le cadre de la production de gaz

    Energy Technology Data Exchange (ETDEWEB)

    Chapoy, A.

    2004-11-15

    Inside wells, natural gases frequently coexist with water. The gases are in equilibrium with the sub-adjacent aquifer. Many problems are associated with the presence of water during the production, transport and processing of natural gases. Accurate knowledge of the thermodynamic properties of the water/hydrocarbon and water-inhibitor/hydrocarbon equilibria near the hydrate forming conditions, at sub-sea pipeline conditions and during the transport is crucial for the petroleum industry. An apparatus based on a static/analytic method combined with a dilutor apparatus to calibrate on the gas chromatograph (GC) detectors with water was used to measure the water content of binary systems (i.e.: water - methane, ethane - water, nitrogen - water...) as well of a synthetic hydrocarbon gas mixture (i.e.: 94% methane, 4% ethane and 2% n-butane) with and without inhibitor. This same apparatus was also used generate data of methane, ethane, propane, n-butane and nitrogen solubility in water and also the solubilities of a synthetic mixture in water. In-house software has been developed in order to fit and model the experimental data. (author)

  2. Effect of oral nitroethane and 2-nitropropanol administration on methane-producing activity and volatile fatty acid production in the ovine rumen.

    Science.gov (United States)

    Anderson, R C; Carstens, G E; Miller, R K; Callaway, T R; Schultz, C L; Edrington, T S; Harvey, R B; Nisbet, D J

    2006-12-01

    Strategies are sought to reduce economic and environmental costs associated with ruminant methane emissions. The effect of oral nitroethane or 2-nitropropanol administration on ruminal methane-producing activity and volatile fatty acid production was evaluated in mature ewes. Daily administration of 24 and 72 mg nitroethane/kg body weight reduced (Pmethane-producing activity by as much as 45% and 69% respectively, when compared to control animals given no nitroethane. A daily dose of 120 mg 2-nitropropanol/kg body weight was needed to reduce (Pmethane-producing activity by 37% from that of untreated control animals. Reductions in methane-producing activity may have been diminished by the last day (day 5) of treatment, presumably due to ruminal adaptation. Oral administration of nitroethane or 2-nitropropanol had little or no effect on accumulations or molar proportions of volatile fatty acids in ruminal contents collected from the sheep. These results demonstrate that nitroethane was superior to 2-nitropropanol as a methane inhibitor and that both nitrocompounds reduced ruminal methanogenesis in vivo without redirecting the flow of reductant generated during fermentation to propionate and butyrate.

  3. 27 CFR 21.125 - Rubber hydrocarbon solvent.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Rubber hydrocarbon solvent. 21.125 Section 21.125 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU....125 Rubber hydrocarbon solvent. (a) Rubber hydrocarbon solvent is a petroleum derivative. (b...

  4. TREATMENT OF HYDROCARBON, ORGANIC RESIDUE AND PRODUCTION CHEMICAL DAMAGE MECHANISMS THROUGH THE APPLICATION OF CARBON DIOXIDE IN NATURAL GAS STORAGE WELLS

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence J. Pekot; Ron Himes

    2004-05-31

    Core specimens and several material samples were collected from two natural gas storage reservoirs. Laboratory studies were performed to characterize the samples that were believed to be representative of a reservoir damage mechanism previously identified as arising from the presence of hydrocarbons, organic residues or production chemicals. A series of laboratory experiments were performed to identify the sample materials, use these materials to damage the flow capacity of the core specimens and then attempt to remove or reduce the induced damage using either carbon dioxide or a mixture of carbon dioxide and other chemicals. Results of the experiments showed that pure carbon dioxide was effective in restoring flow capacity to the core specimens in several different settings. However, in settings involving asphaltines as the damage mechanism, both pure carbon dioxide and mixtures of carbon dioxide and other chemicals provided little effectiveness in damage removal.

  5. Emissions of biogenic volatile organic compounds and subsequent photochemical production of secondary organic aerosol in mesocosm studies of temperate and tropical plant species

    Science.gov (United States)

    Wyche, K. P.; Ryan, A. C.; Hewitt, C. N.; Alfarra, M. R.; McFiggans, G.; Carr, T.; Monks, P. S.; Smallbone, K. L.; Capes, G.; Hamilton, J. F.; Pugh, T. A. M.; MacKenzie, A. R.

    2014-12-01

    Silver birch (Betula pendula) and three Southeast Asian tropical plant species (Ficus cyathistipula, Ficus benjamina and Caryota millis) from the pantropical fig and palm genera were grown in a purpose-built and environment-controlled whole-tree chamber. The volatile organic compounds emitted from these trees were characterised and fed into a linked photochemical reaction chamber where they underwent photo-oxidation under a range of controlled conditions (relative humidity or RH ~65-89%, volatile organic compound-to-NOx or VOC / NOx ~3-9 and NOx ~2 ppbV). Both the gas phase and the aerosol phase of the reaction chamber were monitored in detail using a comprehensive suite of on-line and off-line chemical and physical measurement techniques. Silver birch was found to be a high monoterpene and sesquiterpene but low isoprene emitter, and its emissions were observed to produce measurable amounts of secondary organic aerosol (SOA) via both nucleation and condensation onto pre-existing seed aerosol (YSOA 26-39%). In contrast, all three tropical species were found to be high isoprene emitters with trace emissions of monoterpenes and sesquiterpenes. In tropical plant experiments without seed aerosol there was no measurable SOA nucleation, but aerosol mass was shown to increase when seed aerosol was present. Although principally isoprene emitting, the aerosol mass produced from tropical fig was mostly consistent (i.e. in 78 out of 120 aerosol mass calculations using plausible parameter sets of various precursor specific yields) with condensation of photo-oxidation products of the minor volatile organic compounds (VOCs) co-emitted; no significant aerosol yield from condensation of isoprene oxidation products was required in the interpretations of the experimental results. This finding is in line with previous reports of organic aerosol loadings consistent with production from minor biogenic VOCs co-emitted with isoprene in principally isoprene-emitting landscapes in Southeast

  6. Carbon monoxide production from five volatile anesthetics in dry sodalime in a patient model: halothane and sevoflurane do produce carbon monoxide; temperature is a poor predictor of carbon monoxide production

    Directory of Open Access Journals (Sweden)

    Perez Roberto SGM

    2005-06-01

    Full Text Available Abstract Background Desflurane and enflurane have been reported to produce substantial amounts of carbon monoxide (CO in desiccated sodalime. Isoflurane is said to produce less CO and sevoflurane and halothane should produce no CO at all. The purpose of this study is to measure the maximum amounts of CO production for all modern volatile anesthetics, with completely dry sodalime. We also tried to establish a relationship between CO production and temperature increase inside the sodalime. Methods A patient model was simulated using a circle anesthesia system connected to an artificial lung. Completely desiccated sodalime (950 grams was used in this system. A low flow anesthesia (500 ml/min was maintained using nitrous oxide with desflurane, enflurane, isoflurane, halothane or sevoflurane. For immediate quantification of CO production a portable gas chromatograph was used. Temperature was measured within the sodalime container. Results Peak concentrations of CO were very high with desflurane and enflurane (14262 and 10654 ppm respectively. It was lower with isoflurane (2512 ppm. We also measured small concentrations of CO for sevoflurane and halothane. No significant temperature increases were detected with high CO productions. Conclusion All modern volatile anesthetics produce CO in desiccated sodalime. Sodalime temperature increase is a poor predictor of CO production.

  7. Novel consortium of Klebsiella variicola and Lactobacillus species enhances the functional potential of fermented dairy products by increasing the availability of branched-chain amino acids and the amount of distinctive volatiles.

    Science.gov (United States)

    Rosales-Bravo, H; Morales-Torres, H C; Vázquez-Martínez, J; Molina-Torres, J; Olalde-Portugal, V; Partida-Martínez, L P

    2017-11-01

    Identify novel bacterial taxa that could increase the availability of branched-chain amino acids and the amount of distinctive volatiles during skim milk fermentation. We recovered 344 bacterial isolates from stool samples of healthy and breastfed infants. Five were selected based on their ability to produce branched-chain amino acids. Three strains were identified as Escherichia coli, one as Klebsiella pneumoniae and other as Klebsiella variicola by molecular and biochemical methods. HPLC and solid-phase microextraction with GC-MS were used for the determination of free amino acids and volatile compounds respectively. The consortium formed by K. variicola and four Lactobacillus species showed the highest production of Leu and Ile in skim milk fermentation. In addition, the production of volatile compounds, such as acetoin, ethanol, 2-nonanone, and acetic, hexanoic and octanoic acids, increased in comparison to commercial yogurt, Emmental and Gouda cheese. Also, distinctive volatiles, such as 2,3-butanediol, 4-methyl-2- hexanone and octanol, were identified. The use of K. variicola in combination with probiotic Lactobacillus species enhances the availability of Leu and Ile and the amount of distinctive volatiles during skim milk fermentation. The identified consortium increases the functional potential of fermented dairy products. © 2017 The Society for Applied Microbiology.

  8. THERMOCHEMISTRY OF HYDROCARBON RADICALS

    Energy Technology Data Exchange (ETDEWEB)

    Kent M. Ervin, Principal Investigator

    2004-08-17

    Gas phase negative ion chemistry methods are employed to determine enthalpies of formation of hydrocarbon radicals that are important in combustion processes and to investigate the dynamics of ion-molecule reactions. Using guided ion beam tandem mass spectrometry, we measure collisional threshold energies of endoergic proton transfer and hydrogen atom transfer reactions of hydrocarbon molecules with negative reagent ions. The measured reaction threshold energies for proton transfer yield the relative gas phase acidities. In an alternative methodology, competitive collision-induced dissociation of proton-bound ion-molecule complexes provides accurate gas phase acidities relative to a reference acid. Combined with the electron affinity of the R {center_dot} radical, the gas phase acidity yields the RH bond dissociation energy of the corresponding neutral molecule, or equivalently the enthalpy of formation of the R{center_dot} organic radical, using equation: D(R-H) = {Delta}{sub acid}H(RH) + EA(R) - IE(H). The threshold energy for hydrogen abstraction from a hydrocarbon molecule yields its hydrogen atom affinity relative to the reagent anion, providing the RH bond dissociation energy directly. Electronic structure calculations are used to evaluate the possibility of potential energy barriers or dynamical constrictions along the reaction path, and as input for RRKM and phase space theory calculations. In newer experiments, we have measured the product velocity distributions to obtain additional information on the energetics and dynamics of the reactions.

  9. Determination of nine volatile N-nitrosamines in tobacco and smokeless tobacco products by dispersive solid-phase extraction with gas chromatography and tandem mass spectrometry.

    Science.gov (United States)

    Lv, Fang; Guo, Junwei; Yu, Fei; Zhang, Tingting; Zhang, Shimin; Cui, Huapeng; Liu, Xianjun; Chen, Li; Liu, Leiyu; Liu, Shaofeng; Xie, Fuwei

    2016-06-01

    A method was developed for the determination of nine volatile N-nitrosamines in tobacco and smokeless tobacco products. The targets are N-nitrosodimethylamine, N-nitrosopyrrolidine, N-nitrosopiperidine, N-nitrosomorpholine, N-nitrosoethylmethylamine, N-nitrosodiethylamine, N-nitrosodipropylamine, N-nitrosobuylmethylmine, and N-nitrosodibutylamine. The samples were treated by dispersive solid-phase extraction using 1 g of primary secondary amine and 0.5 g of carbon and then analyzed by gas chromatography with tandem mass spectrometry with an electron impact ion source. The recoveries for the targets ranged from 84 to 118%, with tobacco matrix. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. The effect of raw material contamination with mycotoxins on the composition of alcoholic fermentation volatile by-products in raw spirits.

    Science.gov (United States)

    Kłosowski, Grzegorz; Mikulski, Dawid

    2010-12-01

    The effects of the mycotoxins, aflatoxin B(1), B(2), G(1), G(2) (AF), ochratoxin A, (OTA), zearalenone (ZEA), deoxynivalenol (DON), and fumonisin B(1) (FB(1)) added to corn grain mashes on the composition of fermentation volatile by-products in raw spirits were determined. Except for FB(1), the mycotoxins increased acetaldehyde concentration in the obtained spirits from about 30% to 100% in relation to the control set (30.9+/-1.0mg of acetaldehyde/L EtOH). The largest effect was observed for OTA and AF contaminations (65.9+/-5.9 and 62.4+/-5.0mg/L EtOH, respectively). At the concentrations used (ppb): FB(1), 1875; FB(2), 609; FB(3), 195; DON, 2274; ZEA, 352; AFB(1), 11.65; AFB(2), 12.6; AFG(1), 12.34; AFG(2), 12.04; OTA, 177.5, the mycotoxins did not have a significant effect on the total level of higher alcohols in distillates. As compared to the control, contamination with OTA and FB(1) decreased the 3-methyl-1-butanol concentration by 11.2% and 12.6% respectively, whereas AF decreased the 2-methyl-1-butanol concentration by 14.9%. The mycotoxins AF, ZEA, FB(1), had no significant effect on the concentration of total esters. Whereas OTA caused twofold higher esters concentration in the distillates, DON lowered esters concentration by 32% as compared to control. Presented results show that quantitative changes in composition of volatile fermentation by-products in raw spirits can be related to the presence of increased level of mycotoxins in raw material, especially in the absence of other identifiable factors disturbing the normal course of process. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  11. Effects of solids concentration, pH and carbon addition on the production rate and composition of volatile fatty acids in prefermenters using primary sewage sludge.

    Science.gov (United States)

    Zeng, R J; Yuan, Z; Keller, J

    2006-01-01

    Increasing evidence is emerging that the performance of enhanced biological phosphorus removal (EBPR) systems relies on not only the total amount but also the composition of volatile fatty acids (VFAs). Domestic wastewater often contains limited amounts of VFAs with acetic acid typically being the dominating species. Consequently, prefermenters are often employed to generate additional VFAs to meet the demand for carbon by EBPR and/or denitrification processes. Limited knowledge is currently available on the effects of operational conditions on the production rate and composition of VFAs in prefermenters. In this study, a series of controlled batch experiments were conducted with sludge from a full-scale prefermenter to determine the impact of solids concentration, pH and addition of molasses on prefermentation processes. It was found that an increase in solids concentration enhanced total VFA production with an increased propionic acid fraction. The optimal pH for prefermentation was in the range of 6-7 with significant productivity loss when pH was below 5.5. Molasses addition significantly increased the production of VFAs particularly the propionic acid. However, the fermentation rate was likely limited by the biological activity of the sludge rather than by the amount of molasses added.

  12. Plant essential oils and allied volatile fractions as multifunctional additives in meat and fish-based food products: a review.

    Science.gov (United States)

    Patel, Seema

    2015-01-01

    Essential oils are concentrated aromatic volatile compounds derived from botanicals by distillation or mechanical pressing. They play multiple, crucial roles as antioxidants, food pathogen inhibitors, shelf-life enhancers, texture promoters, organoleptic agents and toxicity-reducing agents. For their versatility, they appear promising as food preservatives. Several research findings in recent times have validated their potential as functional ingredients in meat and fish processing. Among the assortment of bioactive compounds in the essential oils, p-cymene, thymol, eugenol, carvacrol, isothiocyanate, cinnamaldehyde, cuminaldehyde, linalool, 1,8-cineol, α-pinene, α-terpineol, γ-terpinene, citral and methyl chavicol are most familiar. These terpenes (monoterpenes and sesquiterpenes) and phenolics (alcohols, esters, aldehydes and ketones) have been extracted from culinary herbs such as oregano, rosemary, basil, coriander, cumin, cinnamon, mint, sage and lavender as well as from trees such as myrtle, fir and eucalyptus. This review presents essential oils as alternatives to conventional chemical additives. Their synergistic actions with modified air packaging, irradiation, edible films, bacteriocins and plant byproducts are discussed. The decisive roles of metabolic engineering, microwave technology and metabolomics in quality and quantity augmentation of essential oil are briefly mooted. The limitations encountered and strategies to overcome them have been illuminated to pave way for their enhanced popularisation. The literature has been mined from scientific databases such as Pubmed, Pubchem, Scopus and SciFinder.

  13. Fumigant toxicity of volatile natural products from Korean spices and medicinal plants towards the rice weevil, Sitophilus oryzae (L).

    Science.gov (United States)

    Lee, S E; Lee, B H; Choi, W S; Park, B S; Kim, J G; Campbell, B C

    2001-06-01

    The fumigant toxicity of various volatile constituents of essential oils extracted from sixteen Korean spices and medicinal plants towards the rice weevil, Sitophilus oryzae L (Coleoptera: Curculionidae), was determined. The most potent toxicity was found in the essential oil from Mentha arvensis L. var piperascens (LC50 = 45.5 microliters litre-1 air). GC-MS analysis of essential oil from M arvensis showed it to be rich in menthol (63.2%), menthone (13.1%) and limonene (1.5%), followed in abundance by beta-pinene (0.7%), alpha-pinene (0.6%) and linalool (0.2%). Treatment of S oryzae with each of these terpenes showed menthone to be most active (LC50 = 12.7 microliters litre-1 air) followed by linalool (LC50 = 39.2 microliters litre-1 air) and alpha-pinene (LC50 = 54.9 microliters litre-1 air). Studies on inhibition of acetylcholinesterase activity of S oryzae showed menthone to have a nine-fold lower inhibitory effect than menthol, despite menthone being 8.1-fold more toxic than menthol to the rice weevil. Different modes of toxicity of these monoterpenes towards S oryzae are discussed.

  14. The impact of the special participation tax at offshore concessions with high production of hydrocarbons; O impacto da participacao especial na decisao de investimento em projetos de concessoes offshore com superproducao de hidrocarbonetos

    Energy Technology Data Exchange (ETDEWEB)

    Gandra, Rodrigo Mendes; Poznyakov, Karolina Maria. E-mails: rodrigo_gandra@ig.com.br; karolina@ig.com.br

    2004-07-01

    The main objective this technical study is to show the economic impact of payment of Special Participation into capex of projects in fields with high production of hydrocarbons. We would like to show how the actual payment of Special Participation can be really hard to the economic viability of projects. Even so, this technical study take an induction, it mays be showed as a representation to retract the real situation in a big companies that which have considerable opportunities for development of concessions with high potential to produce hydrocarbons. We are willing to present a sample of an alternative assessment. (author)

  15. Investigation of hydrocarbon fractions form waste plastic recycling by FTIR, GC, EDXRFS and SEC techniques.

    Science.gov (United States)

    Miskolczi, N; Bartha, L

    2008-04-24

    Waste high-density polyethylene was converted into different hydrocarbon fractions by thermal and thermo-catalytic batch cracking. For the catalytic degradation of waste plastics three different catalysts (equilibrium FCC, HZSM-5 and clinoptilolite) were used. Catalysts differ basically in their costs and activity due to the differences of micro- and macroporous surface areas and furthermore the Si/Al ratio and acidities are also different. Mild pyrolysis was used at 430 degrees C and the reaction time was 45 min in each case. The composition of products was defined by gas chromatography, Fourier transform infrared spectroscopy, size exclusion chromatography, energy-dispersive X-ray fluorescence spectroscopy and other standardized methods. The effects of catalysts on the properties of degradation products were investigated. Both FCC and clinoptilolite catalysts had considerably catalytic activity to produce light hydrocarbon liquids, while HZSM-5 catalyst produced the highest amount of gaseous products. In case of liquids, carbon numbers were distributed within the C5-C23 range depending on the cracking parameters. Decomposition of the carbon chain could be followed by GC and both by FTIR and SEC techniques in case of volatile fractions and residues. Catalysts increased yields of valuable volatile fractions and moreover catalysts caused both carbon chain isomerization and switching of the position of double bonds.

  16. Arctic Vegetation under Climate Change – Biogenic Volatile Organic Compound Emissions and Leaf Anatomy

    DEFF Research Database (Denmark)

    Schollert, Michelle

    Biogenic volatile organic compounds (BVOCs) emitted from terrestrial vegetation are highly reactive non-methane hydrocarbons which participate in oxidative reactions in the atmosphere prolonging the lifetime of methane and contribute to the formation of secondary organic aerosols. The BVOC...

  17. Microbial Hydrocarbon and ToxicPollutant Degradation Method

    Energy Technology Data Exchange (ETDEWEB)

    Schlueter, Dietrich [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Janabi, Mustafa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); O' Neil, James [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Budinger, Thomas [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-08-16

    The goal of this project is to determine optimum conditions for bacterial oxidation of hydrocarbons and long-chain alkanes that are representative of petroleum contamination of the environment. Polycyclic Aromatic Hydrocarbons (PAHs) are of concern because of their toxicity, low volatility, and resistance to microbial degradation, especially under anaerobic conditions. The uniqueness of our approach is to use carbon-11 in lieu of the traditional use of carbon-14.

  18. Lunar volatiles: a clue for understanding the evolution of the Moon and a resource to its exploration

    Science.gov (United States)

    Gerasimov, Mikhail

    Introduction: The discovery of noticeable hydrogen concentration (believed to be in the form of water) in the polar regions was among the most exciting recent events in the exploration of the Moon. Concentration of water in polar regolith was estimated at a level of 4-6 wt.% [1,2]. Such high concentration of water in polar regolith on volatiles depleted Moon is probably a result of migration of water molecules from its hot equatorial latitudes to cold traps of the northern and southern polar regions. These depositions of volatiles on one hand contain important information on the evolution of the Moon and on the other hand their utilization can be a bases for the future human exploration. The question about diversity and source of the volatiles is still open. Sources of lunar volatiles: Three main possible sources of the Lunar polar volatiles are: Degassing of the interior. Endogenous source of volatiles is provided by degassing of heated interior of planetary bodies. In this case chemical composition of released gases reflects thermodynamic equilibrium of gases over typical magmas at temperatures around 1000°C. The composition of such gas mixtures is characterized by domination of H2O, CO2, and SO2 over other H, C, and S containing components. CO/CO2 ratio here is typically far below 0.1 level. Hydrocarbons are mainly aromatic hydrocarbons, alkanes, and cycloalkanes. Sulfur containing gases are mainly SO2, H2S, and Sx. Isotopic ratios of volatile elements should be the same as for the bulk Moon. Interaction of solar wind protons with surface rocks. Energetic solar wind protons with the absence of an atmospheric shield can react with oxygen of surface rocks and produce water molecules as end product. Such a mechanism provides a source of mainly water on the Moon with solar hydrogen isotopes and Moon rocks oxygen isotopes. Degassing of impacting meteorites and comets. Volatiles of impacting meteorites and comets are released into transient atmosphere. It was shown

  19. Volatile Compounds Produced by Lactobacillus paracasei During Oat Fermentation.

    Science.gov (United States)

    Lee, Sang Mi; Oh, Jieun; Hurh, Byung-Serk; Jeong, Gwi-Hwa; Shin, Young-Keum; Kim, Young-Suk

    2016-12-01

    This study investigated the profiles of volatile compounds produced by Lactobacillus paracasei during oat fermentation using gas chromatography-mass spectrometry coupled with headspace solid-phase microextraction method. A total of 60 compounds, including acids, alcohols, aldehydes, esters, furan derivatives, hydrocarbons, ketones, sulfur-containing compounds, terpenes, and other compounds, were identified in fermented oat. Lipid oxidation products such as 2-pentylfuran, 1-octen-3-ol, hexanal, and nonanal were found to be the main contributors to oat samples fermented by L. paracasei with the level of 2-pentylfuran being the highest. In addition, the contents of ketones, alcohols, acids, and furan derivatives in the oat samples consistently increased with the fermentation time. On the other hand, the contents of degradation products of amino acids, such as 3-methylbutanal, benzaldehyde, acetophenone, dimethyl sulfide, and dimethyl disulfide, decreased in oat samples during fermentation. Principal component analysis (PCA) was applied to discriminate the fermented oat samples according to different fermentation times. The fermented oats were clearly differentiated on PCA plots. The initial fermentation stage was mainly affected by aldehydes, whereas the later samples of fermented oats were strongly associated with acids, alcohols, furan derivatives, and ketones. The application of PCA to data of the volatile profiles revealed that the oat samples fermented by L. paracasei could be distinguished according to fermentation time. © 2016 Institute of Food Technologists®.

  20. Impact of antioxidants on the formation of volatile secondary lipid oxidation products in oil-in-water emulsions

    Science.gov (United States)

    Food emulsions are particularly susceptible to lipid oxidation, which leads to the formation of off-flavors and odors, and ultimately, shorter product shelf lives. Here we examine antioxidants for use in emulsions from a variety of different sources, including natural product extracts as well as rat...

  1. Effect of organic fertilizers prepared from organic waste materials on the production of antibacterial volatile organic compounds by two biocontrol Bacillus amyloliquefaciens strains.

    Science.gov (United States)

    Raza, Waseem; Wei, Zhong; Ling, Ning; Huang, Qiwei; Shen, Qirong

    2016-06-10

    Three organic fertilizers made of different animal and plant waste materials (BOFs) were evaluated for their effects on the production of antibacterial volatile organic compounds (VOCs) by two Bacillus amyloliquefaciens strains SQR-9 and T-5 against the tomato wilt pathogen Ralstonia solanacearum (RS). Both strains could produce VOCs that inhibited the growth and virulence traits of RS; however, in the presence of BOFs, the production of antibacterial VOCs was significantly increased. The maximum inhibition of growth and virulence traits of RS by VOCs of T-5 and SQR-9 was determined at 1.5% BOF2 and 2% BOF3, respectively. In case of strain T-5, 2-nonanone, nonanal, xylene, benzothiazole, and butylated hydroxy toluene and in case of strain SQR-9, 2-nonanone, nonanal, xylene and 2-undecanone were the main antibacterial VOCs whose production was increased in the presence of BOFs. The results of this study reveal another significance of using organic fertilizers to improve the antagonistic activity of biocontrol agents against phytopathogens. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. EFFECT OF FEED PROCESSING ON VOLATILE FATTY ACID PRODUCTION RATES MEASURED WITH 13C-ACETATE IN GRAZING LACTATING DAIRY COWS

    Directory of Open Access Journals (Sweden)

    R. Tothi

    2007-06-01

    Full Text Available The effect of processed cereal grain supplementation on volatile fatty acid (VFA production rates of grazing, lactating Holstein-Friesian cows were measured in a 5x5 Latin square experiment. The experimental treatments were as follows: control (only grazing, no supplement addition, NS, pelleted barley (PB, pelleted maize (PM, toasted and subsequently pelleted barley (TPB, and toasted and subsequently pelleted maize (TPM as supplements. An isotope dilution technique using stable isotope of carbon (13C as an internal marker was employed for the estimation of VFA production. At the beginning of a 3-hour long allowed grazing time, 100 mg of 99% enriched 13C2 Na-acetate were introduced in the rumen and repeated after grazing with 50 mg isotope, after which the cows were starved for 6 hours until evening milking. During grazing disappearance rate (kdis and production rate (kprod of acetate, propionate and butyrate were significantly higher (P≤0.05 in supplemented than in NS cows. Moreover the effect of barley grain and pelleting treatment was higher than the effect of maize grain and toasting. During starvation significantly higher (P≤0.05 kdis and kprod of VFAs were observed in PM and TPM treatments. Total VFA production for the experimental period (grazing + starvation were 49.5, 78.7, 69.9, 88.5, 80.8 mol/day for NS, PB, TPB, PM and TPM, respectively. The higher VFA productions measured in supplemented animals emphasis the extensive digestion that occurs in the rumen after feeding processed grains. In methodological terms, 13C2 Na-acetate labelling appears to be a useful means for examining the VFA acetate production in ruminants.

  3. Determination of benzenic and halogenated volatile organic compounds in animal-derived food products by one-dimensional and comprehensive two-dimensional gas chromatography-mass spectrometry.

    Science.gov (United States)

    Ratel, Jérémy; Engel, Erwan

    2009-11-06

    Animal-derived products are particularly vulnerable to contamination by volatile organic compounds (VOCs). These lipophilic substances, which are generated by an increasing number of sources, are easily transferred to the atmosphere, water, soil, and plants. They are ingested by livestock and become trapped in the fat fraction of edible animal tissues. The aim of this work was to determine the occurrence, risk for human health and entryways of benzenic and halogenated VOCs (BHVOCs) in meat products, milks and sea foods using gas chromatography- mass spectrometry (GC-MS) techniques. In the first part, the occurrence and levels of the BHVOCs in animal products were studied. One muscle and three fat tissues were analysed by GC-Quad/MS in 16 lambs. Of 52 BHVOCs identified, 46 were found in the three fat tissues and 29 in all four tissues, confirming that VOCs are widely disseminated in the body. Twenty-six BHVOCs were quantified in fat tissues, and risk for consumer health was assessed for six of these compounds regulated by the US Environmental Protection Agency (EPA). The BHVOC content was found to be consistent with previous reports and was below the maximum contaminant levels set by the EPA. In the second part, the performance of GCxGC-TOF/MS for comprehensively detecting BHVOCs and showing their entryways in animal-derived food chains was assessed. Meat, milk and oysters were analysed by GC-Quad/MS and GCxGC-TOF/MS. For all these products, at least a 7-fold increase in the contaminants detected was achieved with the GCxGC-TOF/MS technique. The results showed that the production surroundings, through animal feeding or geographical location, were key determinants of BHVOC composition in the animal products.

  4. Resolution of volatile fuel compound profiles from Ascocoryne sarcoides: a comparison by proton transfer reaction-mass spectrometry and solid phase microextraction gas chromatography-mass spectrometry

    Science.gov (United States)

    2012-01-01

    Volatile hydrocarbon production by Ascocoryne sacroides was studied over its growth cycle. Gas-phase compounds were measured continuously with a proton transfer reaction-mass spectrometry (PTR-MS) and at distinct time points with gas chromatography-mass spectrometry (GC-MS) using head space solid phase microextraction (SPME). The PTR-MS ion signal permitted temporal resolution of the volatile production while the SPME results revealed distinct compound identities. The quantitative PTR-MS results showed the volatile production was dominated by ethanol and acetaldehyde, while the concentration of the remainder of volatiles consistently reached 2,000 ppbv. The measurement of alcohols from the fungal culture by the two techniques correlated well. Notable compounds of fuel interest included nonanal, 1-octen-3-ol, 1-butanol, 3-methyl- and benzaldehyde. Abiotic comparison of the two techniques demonstrated SPME fiber bias toward higher molecular weight compounds, making quantitative efforts with SPME impractical. Together, PTR-MS and SPME GC-MS were shown as valuable tools for characterizing volatile fuel compound production from microbiological sources. PMID:22480438

  5. The Cellulolytic Activity And Volatile Fatty Acid Product Of Rumen Bacteria Of Buffalo And Cattle On Rice Straw, Elephant Grass, and Sesbania Leaves Substrates

    Directory of Open Access Journals (Sweden)

    Caribu Hadi Prayitno

    1999-01-01

    Full Text Available Experiment on The Cellulolytic Activity and Volatile Fatty Acid Product of Rumen Bacteria of Buffalo and Cattle on Rice Straw, Elephant Grass, and Sesbania Leaves Substrates had been conducted at Feedstuff Laboratory of Animal Science Soedirman University. The basic design  that was used in this experiment was Completely Randomized Design (CRD with factorial pattern of 6 x 3, three replications. The bacteria isolate as the factors were cellulolytic rumen bacteria isolate of buffalo (A1, A2, and A3 and cattle (A4, A5 and A6 while the substrates (second factor  were NDF rice straw (S1, elephant grass (S2, and sesbania leaves (S3 Cell walls. The result of this experiment showed that the interaction between bacteria isolate and substrate  type were significant on pH, NDF digestibility, cellulase activity, pH was  6.28 until 6.43.  The NDF digestibility range was 12.27 until 55.61 percent. The lowers of cellulase activity was 5.11 IU/ml and the higher was 24.47 IU/ml. The range of acetic acid yield was 63.37 to 307.467 mg/100 ml. Range of  propionic production was 15.17 to 352.20 mg/ 100 ml. The production of butiric acid was 8.77 to 40.87 mg/ 100 ml. The cellulase activity  of cellulolytic rumen bacteria of buffalo was higher than cattle, and also their effect on NDF digestibility of rice straw, elephant grass, and sesbania leaves cell walls. The A3 of cellulolytic rumen bacteria isolate of  buffalo changed cell walls substrat to volatile fatty  acid was more effective than cattle, especially on cell elephant grass. Propionic and butiric  acid that was produced by cellulolytic rumen bacteria isolate of buffalo more higher than cattle (Animal Production 1 (1 : 1-9 (1999 Key Words: Cellulolytic, VFA, Rumen Bacteria, Buffalo, Cattle.

  6. The Effect of CmLOXs on the Production of Volatile Organic Compounds in Four Aroma Types of Melon (Cucumis melo)

    Science.gov (United States)

    Tang, Yufan; Zhang, Chong; Cao, Songxiao; Wang, Xiao; Qi, Hongyan

    2015-01-01

    Lipoxygenases (LOXs) play important role in the synthesis of volatile organic compounds (VOCs), which influence the aroma of fruit. In this study, we elucidate that there is a positive relationship between LOXs activity and VOC production in melon (Cucumis melo), and CmLOX genes are involved in fruit aroma generation in melon. To this end, we tested four aroma types of melon that feature a thin pericarp: two aromatic cultivars of the oriental melons (C. melo var. makuwa Makino), ‘Yu Meiren’ (YMR) and ‘Cui Bao’ (CB); a non-aromatic oriental pickling melon (C. melo var. conomon), ‘Shao Gua’ (SHAO); and a non-aromatic snake melon (C. melo L. var. flexuosus Naud), ‘Cai Gua’ (CAI). A principal component analysis (PCA) revealed that the aromas of SHAO and CAI are similar in nature because their ester contents are lower than those of YMR and CB. Ethyl acetate, benzyl acetate, (E, Z)-2, 6-nonadienal and menthol are four principal volatile compounds that affect the aromatic characteristics of these four types of melons. The LOX activity and total ester content in YMR were the highest among the examined melon varieties. The expression patterns of 18 CmLOX genes were found to vary based on the aromatic nature of the melon. Four of them were highly expressed in YMR. Moreover, we treated the fruit disks of YMR with LOX substrates (linoleic acid and linolenic acid) and LOX inhibitors (n-propyl gallate and nordihydroguariaretic acid). Substrate application promoted LOX activity and induced accumulation of hexanal, (2E)-nonenal and straight-chain esters, such as ethyl acetate. In contrast, LOX inhibitors decreased the levels of these compounds. The effect of CmLOXs in the biosynthesis of esters in melons are discussed. PMID:26599669

  7. The Effect of CmLOXs on the Production of Volatile Organic Compounds in Four Aroma Types of Melon (Cucumis melo.

    Directory of Open Access Journals (Sweden)

    Yufan Tang

    Full Text Available Lipoxygenases (LOXs play important role in the synthesis of volatile organic compounds (VOCs, which influence the aroma of fruit. In this study, we elucidate that there is a positive relationship between LOXs activity and VOC production in melon (Cucumis melo, and CmLOX genes are involved in fruit aroma generation in melon. To this end, we tested four aroma types of melon that feature a thin pericarp: two aromatic cultivars of the oriental melons (C. melo var. makuwa Makino, 'Yu Meiren' (YMR and 'Cui Bao' (CB; a non-aromatic oriental pickling melon (C. melo var. conomon, 'Shao Gua' (SHAO; and a non-aromatic snake melon (C. melo L. var. flexuosus Naud, 'Cai Gua' (CAI. A principal component analysis (PCA revealed that the aromas of SHAO and CAI are similar in nature because their ester contents are lower than those of YMR and CB. Ethyl acetate, benzyl acetate, (E, Z-2, 6-nonadienal and menthol are four principal volatile compounds that affect the aromatic characteristics of these four types of melons. The LOX activity and total ester content in YMR were the highest among the examined melon varieties. The expression patterns of 18 CmLOX genes were found to vary based on the aromatic nature of the melon. Four of them were highly expressed in YMR. Moreover, we treated the fruit disks of YMR with LOX substrates (linoleic acid and linolenic acid and LOX inhibitors (n-propyl gallate and nordihydroguariaretic acid. Substrate application promoted LOX activity and induced accumulation of hexanal, (2E-nonenal and straight-chain esters, such as ethyl acetate. In contrast, LOX inhibitors decreased the levels of these compounds. The effect of CmLOXs in the biosynthesis of esters in melons are discussed.

  8. Linking gene regulation and the exo-metabolome: A comparative transcriptomics approach to identify genes that impact on the production of volatile aroma compounds in yeast

    Directory of Open Access Journals (Sweden)

    Bauer Florian F

    2008-11-01

    Full Text Available Abstract Background 'Omics' tools provide novel opportunities for system-wide analysis of complex cellular functions. Secondary metabolism is an example of a complex network of biochemical pathways, which, although well mapped from a biochemical point of view, is not well understood with regards to its physiological roles and genetic and biochemical regulation. Many of the metabolites produced by this network such as higher alcohols and esters are significant aroma impact compounds in fermentation products, and different yeast strains are known to produce highly divergent aroma profiles. Here, we investigated whether we can predict the impact of specific genes of known or unknown function on this metabolic network by combining whole transcriptome and partial exo-metabolome analysis. Results For this purpose, the gene expression levels of five different industrial wine yeast strains that produce divergent aroma profiles were established at three different time points of alcoholic fermentation in synthetic wine must. A matrix of gene expression data was generated and integrated with the concentrations of volatile aroma compounds measured at the same time points. This relatively unbiased approach to the study of volatile aroma compounds enabled us to identify candidate genes for aroma profile modification. Five of these genes, namely YMR210W, BAT1, AAD10, AAD14 and ACS1 were selected for overexpression in commercial wine yeast, VIN13. Analysis of the data show a statistically significant correlation between the changes in the exo-metabome of the overexpressing strains and the changes that were predicted based on the unbiased alignment of transcriptomic and exo-metabolomic data. Conclusion The data suggest that a comparative transcriptomics and metabolomics approach can be used to identify the metabolic impacts of the expression of individual genes in complex systems, and the amenability of transcriptomic data to direct applications of

  9. The effect of sugar concentration and temperature on growth and volatile phenol production by Dekkera bruxellensis in wine

    OpenAIRE

    Barata, André; Pagliara, Daniela; Piccininno, Tiziana; Tarantino, Francesco; Ciardulli, Wilma; Malfeito-Ferreira, Manuel; Loureiro, Virgílio

    2008-01-01

    The wine spoilage yeast Dekkera bruxellensis was evaluated for the production of 4-ethylphenol under low concentrations (0.02–20 g L 1) of glucose and fructose in synthetic media. Measurable amounts of 4-ethylphenol were produced over 0.2 g L 1 of each sugar. The yeast growth rate and amount of biomass formed increased from 0.2 to 20 g L 1 of glucose or fructose, being accompanied by increasing production of 4-ethylphenol. In red wines, the production of 4-ethylphenol was on...

  10. Polycyclic Aromatic Hydrocarbon Affects Acetic Acid Production during Anaerobic Fermentation of Waste Activated Sludge by Altering Activity and Viability of Acetogen.

    Science.gov (United States)

    Luo, Jingyang; Chen, Yinguang; Feng, Leiyu

    2016-07-05

    Till now, almost all the studies on anaerobic fermentation of waste activated sludge (WAS) for bioproducts generation focused on the influences of operating conditions, pretreatment methods and sludge characteristics, and few considered those of widespread persistent organic pollutants (POPs) in sludge, for example, polycyclic aromatic hydrocarbons (PAHs). Herein, phenanthrene, which was a typical PAH and widespread in WAS, was selected as a model compound to investigate its effect on WAS anaerobic fermentation for short-chain fatty acids (SCFAs) accumulation. Experimental results showed that the concentration of SCFAs derived from WAS was increased in the presence of phenanthrene during anaerobic fermentation. The yield of acetic acid which was the predominant SCFA in the fermentation reactor with the concentration of 100 mg/kg dry sludge was 1.8 fold of that in the control. Mechanism exploration revealed that the present phenanthrene mainly affected the acidification process of anaerobic fermentation and caused the shift of the microbial community to benefit the accumulation of acetic acid. Further investigation showed that both the activities of key enzymes (phosphotransacetylase and acetate kinase) involved in acetic acid production and the quantities of their corresponding encoding genes were enhanced in the presence of phenanthrene. Viability tests by determining the adenosine 5'-triphosphate content and membrane potential confirmed that the acetogens were more viable in anaerobic fermentation systems with phenanthrene, which resulted in the increased production of acetic acid.

  11. Endogenous Lunar Volatiles

    Science.gov (United States)

    McCubbin, F. M.; Liu, Y.; Barnes, J. J.; Boyce, J. W.; Day, J. M. D.; Elardo, S. M.; Hui, H.; Magna, T.; Ni, P.; Tartese, R.; hide

    2017-01-01

    The chapter will begin with an introduction that defines magmatic volatiles (e.g., H, F, Cl, S) versus geochemical volatiles (e.g., K, Rb, Zn). We will discuss our approach of understanding both types of volatiles in lunar samples and lay the ground work for how we will determine the overall volatile budget of the Moon. We will then discuss the importance of endogenous volatiles in shaping the "Newer Views of the Moon", specifically how endogenous volatiles feed forward into processes such as the origin of the Moon, magmatic differentiation, volcanism, and secondary processes during surface and crustal interactions. After the introduction, we will include a re-view/synthesis on the current state of 1) apatite compositions (volatile abundances and isotopic compositions); 2) nominally anhydrous mineral phases (moderately to highly volatile); 3) volatile (moderately to highly volatile) abundances in and isotopic compositions of lunar pyroclastic glass beads; 4) volatile (moderately to highly volatile) abundances in and isotopic compositions of lunar basalts; 5) volatile (moderately to highly volatile) abundances in and isotopic compositions of melt inclusions; and finally 6) experimental constraints on mineral-melt partitioning of moderately to highly volatile elements under lunar conditions. We anticipate that each section will summarize results since 2007 and focus on new results published since the 2015 Am Min review paper on lunar volatiles [9]. The next section will discuss how to use sample abundances of volatiles to understand the source region and potential caveats in estimating source abundances of volatiles. The following section will include our best estimates of volatile abundances and isotopic compositions (where permitted by available data) for each volatile element of interest in a number of important lunar reservoirs, including the crust, mantle, KREEP, and bulk Moon. The final section of the chapter will focus upon future work, outstanding questions

  12. 21 CFR 178.3650 - Odorless light petroleum hydrocarbons.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Odorless light petroleum hydrocarbons. 178.3650... SANITIZERS Certain Adjuvants and Production Aids § 178.3650 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used, as a component of nonfood articles intended for use in...

  13. Hydrocarbon export and production in Colombia. Present time and perspectives; Exportacion y produccion de hidrocarburos en Colombia: Actualidad y perspectiva

    Energy Technology Data Exchange (ETDEWEB)

    Herbert, Richard [BP Exploration (Colombia)

    1997-07-01

    The present projects of operation of new fields will increase the importance of Colombia as exporter of crude. This paper analyzes the process of operation and oil production in Colombia under three subjects: the transition process in this country, future challenges and the necessary associations between the private sector and the state for the success. A projection is made of the oil production in Colombia from 1980 to 2010, as well as of the reserves and production of gas. [Spanish] Los proyectos actuales de explotacion de nuevos campos aumentaran la importancia de Colombia como exportador de crudo. Este trabajo analiza el proceso de explotacion y produccion de petroleo en Colombia bajo tres temas: el proceso de transicion en este pais, sus retos futuros y las asociaciones entre el sector privado y el estado necesarias para el exito. Se hace una proyeccion de la produccion petrolera en Colombia de 1980 al 2010 asi como de las reservas y produccion de gas.

  14. Application of hydrocarbon and perfluorocarbon oxygen vectors to enhance heterologous production of hyaluronic acid in engineered Bacillus subtilis.

    Science.gov (United States)

    Westbrook, Adam W; Ren, Xiang; Moo-Young, Murray; Chou, C Perry

    2018-01-31

    In microbial cultivations for hyaluronic acid (HA) production, oxygen can be a limiting substrate due to its poor solubility in aqueous medium and the substantial increase in culture viscosity at relatively low HA titers. Shear stress due to the high agitation and aeration rates required to overcome oxygen limitation may reduce the quality (i.e. molecular weight) of HA, and production costs associated with power consumption and supplemental oxygen may be excessive. Here, we report the application of oxygen vectors to the heterologous production of HA in engineered Bacillus subtilis, leading to significantly improved culture performance. We first derived an improved HA-producing strain of B. subtilis through engineering of the promoter driving coexpression of seHas and tuaD, leading to high-level HA production. Out of seven potential oxygen vectors evaluated in a preliminary screening, significant improvements to the HA titer and/or cell density were observed in cultures containing n-heptane, n-hexadecane, perfluoromethyldecalin, and perfluoro-1,3-dimethylcyclohexane. Adjustments to the vector concentration, timing of vector addition, and the agitation rate resulted in further enhancements, with the HA titer reaching up to 4.5 g/L after only 10 h cultivation. Moreover, our results indicate that certain vectors may alter the functional expression of Class I hyaluronan synthase (HAS) in B. subtilis, and that higher shear rates may drive more carbon flux through the HA biosynthetic pathway without negatively affecting the MW. Our study demonstrates the efficacy of oxygen vectors to enhance heterologous HA production in B. subtilis, and provides valuable insight for future bioprocess development in microbial HA production. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  15. PERUBAHAN KOMPONEN VOLATIL SELAMA FERMENTASI KECAP [Change Volatile Components During Soy Sauce Fermentation

    Directory of Open Access Journals (Sweden)

    Anton Apriyantono1

    2004-08-01

    Full Text Available A study has been conducted to investigate changes of volatile components during soy sauce fermentation. During the fermentation, many volatile components produced may contribute to soy sauce flavor. THe volatile identified by GC-MS werw classified into hydrocarbon (15, alcohol (15, aldehyde (14, ester (14, ketone (9, benzene derivative (11, fatty acid (9, furan (5, terpenoid (18, pyrazine (3, thiazole (1, pyridine (1 and sulfur containing compound (2.Concentration of compounds found in almost all fermentation steps, such as hexanal and benzaldehyde did. These compounds may be derived from raw soybean, since they were all present in raw soybean and their concentration did not change during fermentation. Concentration of palmitic acid and benzeneacetaldehyde, in general, increased during all fermentation steps. They are probably derived from lipid degradation or microorganism activities. Concentrations of some fatty acids, esters and hydrocarbons, such as linoleic acid, methyl palmitate and heptadecane increased during salt fermentation only. Concentration of some other compounds, such as 2,4 decadienal decreased or undetected during fermentation.The absence of some volatile compounds, e.g. (E-nerolidol and (E,E-famesol in boiled soybean which were previously present in raw soybean may be due to evaporation of these compounds during boiling. Some volatile compounds such as, methyl heptadecanoate and few aromatic alcohols are likely derived from Aspergillus sojae, since these compounds were identified only in 0 day koji

  16. Enhanced ethanol production, volatile compound biosynthesis and fungicide removal during growth of a newly isolated Saccharomyces cerevisiae strain on enriched pasteurized grape musts

    Energy Technology Data Exchange (ETDEWEB)

    Sarris, Dimitris; Kotseridis, Yorgos; Galiotou-Panayotou, Maria; Papanikolaou, Seraphim [Department of Food Science and Technology, Agricultural University of Athens (Greece); Linga, Maria [Oinognosia, Wine analysis and consulting, Kiato (Greece)

    2009-02-15

    The kinetic behavior of a newly isolated Saccharomyces cerevisiae strain, grown on pasteurized grape musts enriched with industrial sugars, was studied after the addition of various concentrations [0.0 (reference), 0.4 and 2.4 mg/L] of the fungicide quinoxyfen to the medium. Batch-flask cultures were carried out. Significant quantities of biomass (10.0{+-}0.8 g/L) were produced regardless of quinoxyfen addition to the medium; therefore, the addition of the fungicide did not seriously inhibit biomass production. Ethanol was synthesized in very high quantities in all trials (highest concentrations 106.4-119.2 g/L). A slight decrease of ethanol production in terms of both absolute value and conversion yield of ethanol produced per sugar consumed was, however, observed when the quinoxyfen concentration was increased. The addition of quinoxyfen led to significantly lower ethylic ester levels, which also pertains to the acetates analyzed in this study. Fusel alcohol synthesis seemed to be activated when 0.4 mg/L quinoxyfen was added, but at 2.4 mg/L of added fungicide, no statistically significant differences were observed compared with the control trial. Volatile acid levels did not present a uniform trend in relation with the added fungicide. Finally, the fermentation was accompanied by a significant reduction of the fungicide concentration (79-82 wt% fungicide removal). (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  17. Relation between coumarate decarboxylase and vinylphenol reductase activity with regard to the production of volatile phenols by native Dekkera bruxellensis strains under 'wine-like' conditions.

    Science.gov (United States)

    Sturm, M E; Assof, M; Fanzone, M; Martinez, C; Ganga, M A; Jofré, V; Ramirez, M L; Combina, M

    2015-08-03

    Dekkera/Brettanomyces bruxellensis is considered a major cause of wine spoilage, and 4-ethylphenol and 4-ethylguaiacol are the most abundant off-aromas produced by this species. They are produced by decarboxylation of the corresponding hydroxycinnamic acids (HCAs), followed by a reduction of the intermediate 4-vinylphenols. The aim of the present study was to examine coumarate decarboxylase (CD) and vinylphenol reductase (VR) enzyme activities in 5 native D. bruxellensis strains and determine their relation with the production of ethylphenols under 'wine-like' conditions. In addition, biomass, cell culturability, carbon source utilization and organic acids were monitored during 60 days. All strains assayed turned out to have both enzyme activities. No significant differences were found in CD activity, whilst VR activity was variable among the strains. Growth of D. bruxellensis under 'wine-like' conditions showed two growth phases. Sugars were completely consumed during the first growth phase. Transformation of HCAs into ethylphenols also occurred during active growth of the yeast. No statistical differences were observed in volatile phenol levels produced by the strains growing under 'wine-like' conditions, independently of the enzyme activity previously recorded. Furthermore, our results demonstrate a relationship between the physiological state of D. bruxellensis and its ability to produce ethylphenols. Inhibition of growth of D. bruxellensis in wine seems to be the most efficient way to avoid ethylphenol production and the consequent loss of wine quality. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Volatile Compounds from Grape Skin, Juice and Wine from Five Interspecific Hybrid Grape Cultivars Grown in Québec (Canada) for Wine Production.

    Science.gov (United States)

    Slegers, Amélie; Angers, Paul; Ouellet, Étienne; Truchon, Tamara; Pedneault, Karine

    2015-06-15

    Developed from crosses between Vitis vinifera and North American Vitis species, interspecific hybrid grape varieties are becoming economically significant in northern areas, where they are now extensively grown for wine production. However, the varietal differences between interspecific hybrids are not well defined, nor are the relationships between hybrid grape and wine composition, which causes significant drawbacks in the development of viticulture and winemaking of northern wines. In an effort to increase our understanding of interspecific hybrids, we have characterized the free volatile compounds profiles of berries (juice and skin) and wines of five red hybrid varieties (Frontenac, Marquette, Maréchal Foch, Sabrevois and St. Croix) grown in Québec (Canada), using GC-MS(TOF)-SPME. In grapes and wines, significantly higher levels of C6 and other fatty acid degradation products (FADP) were found in Frontenac, Maréchal Foch and Marquette. Terpenes were primarily located in the skin, with Marquette showing the highest level for these compounds. Both the level of terpenes and the level of FADP in grape were strongly correlated with their respective levels in wine, as demonstrated by the redundancy analyses. Nonanal, (E,Z)-2,6-nonadienal, β-damascenone, ethyl octanoate and isoamyl acetate showed the highest OAVs in the wines of the studied varieties.

  19. Identification of volatile butyl rubber thermal-oxidative degradation products by cryofocusing gas chromatography/mass spectrometry (cryo-GC/MS).

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Jonell Nicole; White, Michael Irvin; Bernstein, Robert; Hochrein, James Michael

    2013-02-01

    Chemical structure and physical properties of materials, such as polymers, can be altered as aging progresses, which may result in a material that is ineffective for its envisioned intent. Butyl rubber formulations, starting material, and additives were aged under thermal-oxidative conditions for up to 413 total days at up to 124 ÀC. Samples included: two formulations developed at Kansas City Plant (KCP) (#6 and #10), one commercially available formulation (#21), Laxness bromobutyl 2030 starting material, and two additives (polyethylene AC-617 and Vanax MBM). The low-molecular weight volatile thermal-oxidative degradation products that collected in the headspace over the samples were preconcentrated, separated, and detected using cryofocusing gas chromatography mass spectrometry (cryo-GC/MS). The majority of identified degradation species were alkanes, alkenes, alcohols, ketones, and aldehydes. Observations for Butyl #10 aged in an oxygen-18 enriched atmosphere (18O2) were used to verify when the source of oxygen in the applicable degradation products was from the gaseous environment rather than the polymeric mixture. For comparison purposes, Butyl #10 was also aged under non-oxidative thermal conditions using an argon atmosphere.

  20. Measurement of stable carbon isotope ratios of non-methane hydrocarbons and halocarbons

    NARCIS (Netherlands)

    Zuiderweg, A.T.|info:eu-repo/dai/nl/304831980

    2012-01-01

    Within the realm of volatile organic compounds, hydrocarbons and halocarbons form a sizable proportion of carbon input to the atmosphere. Within these compound categories, the light non-methane hydrocarbons (NMHC, two to seven carbon atoms) and monocarbon halocarbons have a special place as these

  1. Effects of host gut-derived probiotic bacteria on gut morphology, microbiota composition and volatile short chain fatty acids production of Malaysian Mahseer Tor tambroides

    Directory of Open Access Journals (Sweden)

    Md. Asaduzzaman

    2018-02-01

    Full Text Available Three host-associated probiotics (Bacillus sp. AHG22, Alcaligenes sp. AFG22, and Shewanella sp. AFG21 were isolated from the gastrointestinal tract of Tor tambroides, and their effects were evaluated on gut morphology, microbiota composition and volatile short chain fatty acids (VSCFAs production of the same species. A control diet (40% crude protein and 10% lipid was formulated, and three different probiotic supplemented diets were prepared by immersing the control diet in each host-derived isolated probiotic, suspended in sterile phosphate buffered saline (PBS, to achieve concentration at 1.0 × 108 CFU g−1 feed. Triplicate groups of T. tambroides juveniles (1.39 ± 0.06 g were stocked in twelve glass aquaria (100 L capacity with stocking density of 20 individuals per aquarium. The feed was applied twice daily at 3.0% of the body weight per day for 90 days. The intake of probiotics drastically modified the gut microbiota composition. The average number of OTUs, Shannon index and Margalef species richness were significantly higher in host-associated probiotic treatments compared to the control. A significant increase of lipolytic, proteolytic and cellulolytic bacterial number were observed in the gastrointestinal tracts of T. tambroides fed the diets supplemented with Alcaligenes sp. AFG22 compared to the control. Villus length, villus width and villus area were significantly higher in T. tambroides juveniles fed the diet supplemented with Alcaligenes sp. AFG22. Acetate and butyrate were detected as main VSCFA production in the gastrointestinal tract of T. tambroides. Acetate and total VSCFAs production in Alcaligenes sp. AFG22 supplemented treatment was significantly higher than control. These results indicate that host-derived probiotics, especially Alcaligenes sp. has a significant potential as an important probiotic to enhance the nutrients utilization and metabolism through increasing gut surface area and VSCFAs

  2. Impacts of production of hydrocarbons in Campos Basin: missing or not detected; Impactos da producao de hidrocarbonetos na Bacia de Campos: ausentes ou nao detectados

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Carolina E. [Instituto Brasileiro de Meio Ambiente e Recursos Naturais Renovaveis (CGPEG/DILIC/IBAMA), Rio de Janeiro, RJ (Brazil). Coordenacao Geral de Petroleo e Gas. Diretoria de Licenciamento; Gama, Bernardo A. Perez da [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

    2012-07-01

    According to the Brazilian legislation, the Environmental Impacts Monitoring Plan is one of the requirements of the environmental licensing to offshore oil and gas production activities. The Monitoring Plan's structure is based upon sampling and evaluation of numerous parameter settings in water and sediment compartments, while the conclusion as to the existence or absence of impact is obtained after statistical analysis of the results. The aim of this work was to evaluate the methodological adequacy of monitoring and to calculate the statistical power of tests applied with the purpose to determine the reliability of their findings. Experiences in other countries like Australia have shown that this is an important instrument in preparing an effective environmental study regarding the detection of impacts. In Brazil, this is the first initiative to critically evaluate the results of reports of environmental monitoring originated from the licensing of hydrocarbons production activities. Campaign reports forwarded to the environmental agency in charge, i.e., the Brazilian Institute of Environment and Renewable Natural Resources (IBAMA), and the selected ventures are located in the Campos Basin and have different operating companies. The results were both relevant and concerning. All monitoring reports confirmed the absence of alterations or impacts on the biotic media for sediment compartments, but the greater statistical power did not exceed 25% for a great magnitude impact. Thus it was concluded that if the oil production activity has caused alterations or impacts to bentonic organisms, the carried out monitoring was inefficient to detect them even if they were of great magnitude. This analysis is expected to be an instrument for future changes in environmental licensing procedures e for the improvement of the environmental public management in Brazil. (author)

  3. Asymmetric Realized Volatility Risk

    Directory of Open Access Journals (Sweden)

    David E. Allen

    2014-06-01

    Full Text Available In this paper, we document that realized variation measures constructed from high-frequency returns reveal a large degree of volatility risk in stock and index returns, where we characterize volatility risk by the extent to which forecasting errors in realized volatility are substantive. Even though returns standardized by ex post quadratic variation measures are nearly Gaussian, this unpredictability brings considerably more uncertainty to the empirically relevant ex ante distribution of returns. Explicitly modeling this volatility risk is fundamental. We propose a dually asymmetric realized volatility model, which incorporates the fact that realized volatility series are systematically more volatile in high volatility periods. Returns in this framework display time varying volatility, skewness and kurtosis. We provide a detailed account of the empirical advantages of the model using data on the S&P 500 index and eight other indexes and stocks.

  4. Extractive distillation of hydrocarbon mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Lee, F.M.; Brown, R.E.; Johnson, M.M.

    1991-07-16

    This patent describes a process for separating at least one aromatic hydrocarbon containing 6-12 carbon atoms per molecule from at least one close-boiling alkane by extractive distillation of a feed consisting essentially of the at least one aromatic hydrocarbon and the at least one alkane in the presence of a solvent consisting essentially of N-methyl-2-thiopyrrolidone, optionally in combination with at least one cosolvent selected from the group consisting of glycol compounds, sulfolane compounds and N-({beta}-mercaptoalkyl)-2-pyrrolidone compounds; wherein the extractive distillation process produces an overhead distillate product which contains a smaller volume percentage of the at least one alkane than the feed, and a bottoms product which contains the solvent and a larger volume percentage of the at least one aromatic hydrocarbon and a smaller volume percentage of the at least one alkane than the feed; and wherein the at least one aromatic hydrocarbon is separated from the solvent and recovered from the bottoms product. This patent also describes a process for separating at least one cycloalkane containing 5-10 carbon atoms per molecule from at least one close-boiling alkane by extracting distillation of a feed consisting essentially of the at least one cycloalkane and the at least one alkane in the presence of a solvent consisting essentially of N-methyl-2-thiopyrrolidone, optionally in combination with at least one cosolvent selected from the group consisting of glycol compounds, sulfone compounds and N-({beta}-mercaptoalkyl)-2-pyrrolidone compounds.

  5. Headspace Analysis of Volatile Compounds Coupled to Chemometrics in Leaves from the Magnoliaceae Family

    Directory of Open Access Journals (Sweden)

    Mohamed A. Farag

    2015-01-01

    Full Text Available Headspace volatile analysis has been used for volatiles profiling in leaves of 4 Magnolia species with a total of 75 compounds were identified. Monterpene hydrocarbons dominated the volatile blend of M. calophylla (86%, M. acuminata (78%, M. virginiana (70% and M. grandiflora (47% with b -pinene and b -ocimene occurring in the largest amounts, whereas sesquiterpenes were the most abundant compounds in M. grandiflora (39%. High levels of oxygenated compounds were only found in M. virginiana volatile blend (11.4% with 2-phenylethyl alcohol as major component. Hierarchical cluster analysis performed on volatiles content revealed the close relationship between M. acuminata and M. calophylla.

  6. Characterization of volatile composition of Laurencia dendroidea by gas chromatography-mass spectrometry

    Directory of Open Access Journals (Sweden)

    Vanessa Gressler

    2012-05-01

    Full Text Available In this study we report the characterization of the volatile compounds of Laurencia dendroidea. Solvent extracts (dichloromethane and methanol, hydrodistillation extracts and headspace solid-phase microextraction samples were obtained and analyzed by GC-MS. Forty-six volatile components were identified in L. dendroidea, among them hydrocarbons, alcohols, phenols, aldehydes, ketones, acids, esters and terpenes.

  7. Occurrence and palaeoenvironmental significance of aromatic hydrocarbon biomarkers in Oligocene sediments from the Mallik 5L-38 Gas Hydrate Production Research Well (Canada)

    Energy Technology Data Exchange (ETDEWEB)

    Haberer, R.M.; Mangelsdorf, K.; Wilkes, H.; Horsfield, B. [Geoforschungszentrum Potsdam, Potsdam (Germany)

    2006-07-01

    The aromatic hydrocarbon biomarker distributions of thirty Oligocene sediment samples with different lithology (lignite, clay and sand) from the JAPEX/JNOC/GSC et al. Mallik 5L-38 Gas Hydrate Production Research Well, Canada, were analyzed using gas chromatography-mass spectrometry (GC-MS). The compositions vary with lithology, indicating a change in palaeoenvironmental conditions at the time of deposition. Aromatic diterpenoids of the abietane type are more abundant in the lignite samples than in the clay samples and represent a gymnosperm (e.g., conifer) dominated palaeovegetation. In contrast, in the clay samples aromatic triterpenoids are generally preserved as major constituents, indicating angiosperm dominated vegetation. The sand samples contain only minor amounts of aromatic terpenoids, but show a preference for diterpenoid gymnosperm markers. To recognise gymnosperm versus angiosperm dominated palaeoenvironments a new ratio, termed the angiosperm-gymnosperm aromatic ratio (AGAR), has been developed. Thus, the terpenoid distribution in the deltaic sediments provides information on the compositional changes in the plant community at the Mallik site (lignites) and the hinterland (clays) over time. Concomitantly, the changing dominance in the plant communities allows an insight into varying climatic conditions during the late Oligocene in the area.

  8. Poly-3-hydroxybutyrate (PHB) production from alkylphenols, mono and poly-aromatic hydrocarbons using Bacillus sp. CYR1: A new strategy for wealth from waste.

    Science.gov (United States)

    Venkateswar Reddy, M; Mawatari, Yasuteru; Yajima, Yuka; Seki, Chigusa; Hoshino, Tamotsu; Chang, Young-Cheol

    2015-09-01

    In the present study five different types of alkylphenols, each of the two different types of mono and poly-aromatic hydrocarbons were selected for degradation, and conversion into poly-3-hydroxybutyrate (PHB) using the Bacillus sp. CYR1. Strain CYR1 showed growth with various toxic organic compounds. Degradation pattern of all the organic compounds at 100 mg/l concentration with or without addition of tween-80 were analyzed using high pressure liquid chromatography (HPLC). Strain CYR1 showed good removal of compounds in the presence of tween-80 within 3 days, but it took 6 days without addition of tween-80. Strain CYR1 showed highest PHB production with phenol (51 ± 5%), naphthalene (42 ± 4%), 4-chlorophenol (32 ± 3%) and 4-nonylphenol (29 ± 3%). The functional groups, structure, and thermal properties of the produced PHB were analyzed. These results denoted that the strain Bacillus sp. CYR1 can be used for conversion of different toxic compounds persistent in wastewaters into useable biological polyesters. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Effect of the partial NaCl substitution by other chloride salts on the volatile profile during the ripening of dry-cured lacón

    Energy Technology Data Exchange (ETDEWEB)

    Dominguez, R.; Munekata, P.E.; Cittadini, A.; Lorenzo, J.M.

    2016-07-01

    The influence of three salting treatments (treatment II: 50% NaCl-50% KCl; III: 45% NaCl-25% KCl-20% CaCl2-10% MgCl2; IV: 30% NaCl-50% KCl-15% CaCl2-5% MgCl2) on the formation of volatile compounds throughout the process was studied and compared to those of a control “lacón” (treatment I: 100% NaCl). There was an intense formation of volatile compounds throughout the processing, particularly during the dry-ripening stage. The most abundant chemical family in all the formulations, in the final product was hydrocarbons followed by aldehydes. The total volatile compound release was more intense in the control “lacóns” (1164 AU×106 ·g–1dry matter) than in “lacóns” from formulations II, III and IV (817–891 AU×106 ·g−1dry matter). The “lacóns” from formulation I showed the highest amounts of aldehydes. The “lacóns” from formulations I and II presented the highest amounts of hydrocarbons. The main conclusion is that the replacement of NaCl produces changes in the volatile profile and could be affect the aroma of “lacón”. (Author)

  10. Chemical investigation of the volatile components of shade-dried petals of damask rose (Rosa damascena Mill.

    Directory of Open Access Journals (Sweden)

    Verma Swaroop Ram

    2011-01-01

    Full Text Available Roses are always appreciated because of their inimitable aroma, many uses and of course their beauty. In addition to the different damask rose (Rosa damascena Mill. products (oil, water, concrete, absolute, gulkand etc., its dried petals are also used for various health purposes. The hydrodistilled volatile oil and water of shade-dried damask rose petals were investigated by GC and GC-MS. The predominant components of tThe essential oil and rose water were aliphatic hydrocarbons (56.4 and 46.3%, followed by oxygenated monoterpenes (14.7 and 8.7%. The main aliphatic hydrocarbons of the essential oil and rose water were heneicosane (19.7 and 15.7%, nonadecane (13.0 and 8.4%, tricosane (11.3 and 9.3% and pentacosane (5.3 and 5.1% while the content of 2-phenyl ethyl alcohol was 0.4% and 7.1% in the essential oil and rose water, respectively. The chemical composition of the dried rose petal volatiles is quite different from fresh flower volatiles.

  11. Production of methane-rich syngas from hydrocarbon fuels using multi-functional catalyst/capture agent

    Science.gov (United States)

    Siefert, Nicholas S; Shekhawat, Dushyant; Berry, David A; Surdoval, Wayne A

    2014-12-30

    The disclosure provides a gasification process for the production of a methane-rich syngas at temperatures exceeding 700.degree. C. through the use of an alkali hydroxide MOH, using a gasification mixture comprised of at least 0.25 moles and less than 2 moles of water for each mole of carbon, and at least 0.15 moles and less than 2 moles of alkali hydroxide MOH for each mole of carbon. These relative amounts allow the production of a methane-rich syngas at temperatures exceeding 700.degree. C. by enabling a series of reactions which generate H.sub.2 and CH.sub.4, and mitigate the reforming of methane. The process provides a methane-rich syngas comprised of roughly 20% (dry molar percentage) CH.sub.4 at temperatures above 700.degree. C., and may effectively operate within an IGFC cycle at reactor temperatures between 700-900.degree. C. and pressures in excess of 10 atmospheres.

  12. Multiple headspace-solid-phase microextraction as a powerful tool for the quantitative determination of volatile radiolysis products in a multilayer food packaging material sterilized with γ-radiation.

    Science.gov (United States)

    de Oliveira, Cristiane Patrícia; Rodriguez-Lafuente, Angel; Soares, Nilda de Fátima Ferreira; Nerin, Cristina

    2012-06-29

    A method consisting of multiple headspace solid-phase microextraction followed by gas chromatography-mass spectrometry analysis was developed and used to determine the main volatile radiolysis products formed by γ-irradiation of flexible multilayer food packaging samples. The developed method allows the use of solid-phase microextraction in the quantification of compounds from plastic solid samples. A screening of volatiles in the γ-irradiated and non-irradiated films was performed and 29 compounds were identified in the irradiated packaging, 17 of which were absent in the non-irradiated samples. The main volatile radiolysis products identified were: 1,3-di-tert-butylbenzene; 2,6-di-tert-butyl-1,4-benzoquinone; 4-tert-butyl-phenol and the off-odor compounds butanoic acid and valeric acid. These volatile radiolysis compounds were determined with the proposed method and the results are shown and discussed. Solid-liquid extraction and headspace solid-phase microextraction methods were also studied for comparative purposes. The automated solvent-free multiple HSPME technique here presented can be used to quantify the radiolysis compounds in irradiated plastic solid samples in a simple way with the advantages of being free from matrix influence and environmentally friendly. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Production and Trade Situation in Iran and USA and Impact of Exchange rate Volatility on the Exports

    Directory of Open Access Journals (Sweden)

    M. Salarpour

    2015-05-01

    Full Text Available In the present study, pistachio production and trade and influential factors on its exports in Iran and the USA are compared the the .Using the annual data from 1970 to 2011; this study aimed to analyze the effects of pistachio price and the effects of food security. Moreover, the relationship between exchange rate and pistachio export in the Iranian economy was analyzed through examining a non linear relation between the two factors. Therefore, the hypothesis validation upon nonlinearity relationship between exchange rate and pistachio export was analyzed using smooth transition autoregressive model (STAR. The results of smooth transition model (STAR show that there is a nonlinear Granger causality between exchange rate and pistachio export and vice versa. It is therefore recommended ,in order to determine the threshold level of potential benefits of pistachio exports, the existence of the nonlinear relationship between the dynamic exchange rate and pistachio exports should be considered. Furthermore, in order to maintain market share in the international level, understanding target markets of export and achieving complete information upon the position of the major competitors in the production and trade of Pistachio is essential.

  14. Measuring the EUV-induced contamination rates of TiO2-capped multilayer optics by anticipated production-environment hydrocarbons

    Science.gov (United States)

    Hill, S. B.; Faradzhev, N. S.; Tarrio, C. S.; Lucatorto, T. B.; Bartynski, R. A.; Yakshinskiy, B. V.; Madey, T. E.

    2009-03-01

    The primary, publicly reported cause of optic degradation in pre-production extreme-ultraviolet (EUV) lithography systems is carbon deposition. This results when volatile organics adsorb onto optic surfaces and then are cracked by EUV-induced reactions. Hence the deposition rate depends on the adsorption-desorption kinetics of the molecule-surface system as well as the basic photon-stimulated reaction rates, both of which may vary significantly for different organic species. The goal of our ongoing optics-contamination program is to estimate the contamination rate of species expected in the tool environment by exposing samples to in-band 13.5 nm light from our synchrotron in the presence of fixed partial pressures of admitted gases. Here we report preliminary results of contamination rates on TiO2-capped samples for species observed in resist-outgassing measurements (benzene, isobutene, toluene and tert-butylbenzene) in the pressure range (10-6 to 10-4) Pa which all display an unexpected logarithmic dependence on pressure. This scaling is in agreement with previous EUV exposures of other species at NIST as well as independent measurements of coverage performed at Rutgers University. These results are consistent with a molecular desorption energy that decreases with coverage due to molecular interactions (Temkin model). Use of the proper scaling law is critical when estimating optic lifetimes by extrapolating over the 3-to-6 orders of magnitude between accelerated-testing and tool-environment partial pressures.

  15. Volatile organic compounds in a multi-storey shopping mall in guangzhou, South China

    Science.gov (United States)

    Tang, Jianhui; Chan, C. Y.; Wang, Xinming; Chan, L. Y.; Sheng, Guoying; Fu, Jiamo

    Volatile organic compounds (VOCs) specified in the USEPA TO-14 list were analysed in microenvironments of a multi-storey shopping mall in Guangzhou city, South China. The microenvironments studied include both indoor (department store, supermarket, fast-food court, electronic games room, children's playground, gallery and book store) and outdoor ones (rooftop and ground level entrance). The characteristics and concentration of VOCs varied widely in differing microenvironments. The average concentrations of the total VOCs in the indoor microenvironments ranged from 178.5 to 457.7 μg m -3 with a maximum of 596.8 μg m -3. The fast-food court and a leather products department store had the highest concentrations of benzene, toluene, ethylbenzene, xylenes and chlorinated hydrocarbons. A high level of 1,4-dichlorobenzene was found in all indoor microenvironments with an average of 12.3 μg m -3 and a maximum of 44.3 μg m -3. The ratios of average indoor to outdoor concentrations (I/O ratio) in all indoor microenvironments fell between 1 and 3, except an average of 24.6 and a maximum of 77.8 in the fashion department store for 1,4-dichlorobenzene. Indoor emission sources of monocyclic aromatic hydrocarbons in the shopping mall might include cooking stoves, leather products and building materials. Chlorinated hydrocarbons, however, were possibly connected with their use as cleaning agents or deodorizers.

  16. Microbiological spoilage and volatiles production of gutted European sea bass stored under air and commercial modified atmosphere package at 2 °C.

    Science.gov (United States)

    Parlapani, Foteini F; Haroutounian, Serkos A; Nychas, George-John E; Boziaris, Ioannis S

    2015-09-01

    Microbiological, sensory, TVB-N and TMA-N changes and Volatile Organic Compounds (VOCs) detection using the SPME/GC-MS technique, were performed to evaluate potential chemical spoilage indices (CSI) of gutted sea bass (Dicentrarchus labrax) stored at 2 °C under air and in modified atmosphere packaging (MAP CO2: 60%, O2: 10%, N2: 30%). Shelf-life, determined by sensory evaluation, of gutted sea bass stored at 2 °C under air and MAP was 9 and 13 d respectively. Pseudomonas and H2S producing bacteria were among the dominant spoilage microorganisms under both storage conditions, while Lactic Acid Bacteria (LAB) and Brochothrix thermosphacta were co-dominant with Pseudomonas and H2S producing bacteria under MAP. The traditional CSIs such as TVB-N and TMA-N were increased substantially only at the late stages of storage or after rejection of the products, making them unsuitable for freshness/spoilage monitoring throughout storage. A substantial number of VOCs attributed to microbiological action or chemical activity, were detected including alcohols, aldehydes, ketones, organic acids and esters. The level of microbial origin VOCs such as ethanol, 2-ethyl-1-hexanol, 3-methyl-1-butanol, 2-methyl-1-butanol, 3-methylbutanal, 2-methylbutanal and some ethyl esters increased during storage, suggesting their potential as CSIs. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Production of Volatile Compounds in Reconstituted Milk Reduced-Fat Cheese and the Physicochemical Properties as Affected by Exopolysaccharide-Producing Strain

    Directory of Open Access Journals (Sweden)

    Weijun Wang

    2012-12-01

    Full Text Available The application of the exopolysaccharide-producing strains for improving the texture and technical properties of reduced-fat cheese looks very promising. Streptococcus thermophilus TM11 was evaluated for production of reduced-fat cheese using reconstituted milk powder (CRMP. The physicochemical analysis of fresh and stored cheeses showed that this strain slightly increased moisture content resulting in cheese with higher yield and lower protein content compared to the direct acidified cheese. The volatiles of cheese were determined by SPME and GC equipped with a mass spectrometer. The results indicated that the major compounds included aldehydes, ketones and acids, whereas, alcohols and branched-chain aldehydes that contribute to exciting and harsh flavors were not found in CRMP. By the textural profile analysis, we found the cheese made with S. thermophilus TM11 had lower cohesiveness, resilience and higher adhesiveness than the direct acidified cheese, and had similar hardness. Further, S. thermophilus TM11 greatly changed the protein matrix with more opened cavities according to observation by scanning electron microscopy. Consequently, use of S. thermophilus TM11 could endow CRMP with the novel and suitable flavor properties and improved texture quality.

  18. A two-stage fixed-bed reactor for direct hydrotreatment of volatiles from the hydropyrolysis of biomass: effect of catalyst temperature, pressure and catalyst ageing time on product characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Pindoria, R.V.; Megaritis, A.; Herod, A.A.; Kandiyoti, R. [Imperial College of Science, Technology and Medicine, London (United Kingdom). Dept. of Chemical Engineering and Chemical Technology

    1998-12-01

    This investigation involved the hydropyrolysis of biomass (eucalyptus globulus) and the immediate catalytic hydrocracking of pyrolytic oils in the second stage of the reactor. The effects of temperature, pressure and the catalyst ageing time on the final product tar have been studied using the catalyst Zeolite H-ZSM5. The catalytically hydrocracked tar/oil products were characterised and compared with the hydropyrolysis product from the first stage of the reactor to determine the effect of catalytic hydrocracking. The carbon deposition on the catalyst has been examined using thermogravimetric analysis. The tar yields after catalytic hydrocracking decreased with increasing pressure and temperature of the cracking stage. The tar yields at 10 bar pressure were greater than those at 40 bar pressure. The fresh zeolite catalyst trapped more than 40% of the product from the hydropyrolysis stage and TGA evidence indicated that this was not as carbon deposition but as volatiles trapped in the zeolite matrix. Reuse of the catalyst resulted in little more uptake of volatiles; however, extended use of the catalyst did not result in increased yields of liquid products but in increased production of light volatiles or gas. The H-ZSM5 catalyst appeared to act as a more active cracking catalyst rather than to promote hydrogenation or deoxygenation of the liquids produced in the hydropyrolysis stage. Characterisation of the liquids by SEC and UV fluorescence indicated that structural changes were relatively minor despite the significant changes in yields of liquids with process conditions. Available reaction routes do not appear to allow specific deoxygenation pathways to predominate without disintegration of parent molecules to lighter volatiles, under the conditions used here. 41 refs., 10 figs., 4 tabs.

  19. Effects of crystalline menthol on blood metabolites in Holstein steers and in vitro volatile fatty acid and gas production.

    Science.gov (United States)

    Van Bibber-Krueger, C L; Miller, K A; Aperce, C C; Alvarado-Gilis, C A; Higgins, J J; Drouillard, J S

    2016-03-01

    Fifty-two Holstein steers (573 ± 9.92 kg BW) were used to determine if oral administration of crystalline menthol would induce changes in endogenous secretions of IGF-1 and circulating concentrations of glucose, lactate, and plasma urea nitrogen (PUN). Steers were blocked by BW and assigned within block to treatment. Treatments consisted of 0, 0.003, 0.03, or 0.3% crystalline menthol (DM basis) added to the diet. Animals were housed in individual, partially covered pens equipped with feed bunks and automatic water fountains. On d 1 of the experiment, blood samples were obtained via jugular venipuncture at 0, 6, 12, 18, and 24 h after feeding. Treatment administration commenced on d 2, and blood samples were again drawn at 0, 6, 12, 18, and 24 h after feeding. This blood-sampling schedule was repeated on d 9, 16, 23, and 30. Plasma was analyzed for PUN, glucose, and lactate concentrations. Serum was used to analyze IGF-1 concentration. Body weights were measured on d 1, 9, 16, 23, and 30. To accompany the live animal phase, in vitro fermentations were performed using ruminal fluid cultures. Measurements included VFA concentrations and fermentative gas production for cultures containing crystalline menthol at 0, 0.003, 0.03, or 0.3% of substrate DM. Addition of menthol to the diet of steers resulted in a treatment × day interaction ( menthol had greater serum IGF-1 concentrations on d 2 compared with steers fed 0.03% menthol. Steers fed 0% menthol had greater serum IGF-1 concentrations on d 9 compared with steers fed 0.03 and 0.3% menthol, whereas no differences were observed on d 23 or 30. Plasma glucose was similar among treatments until d 23, when steers supplemented with 0.03% menthol had lower glucose concentrations. Plasma urea nitrogen concentrations were not different among treatments; however, PUN concentrations varied by day. A linear response was detected for BW ( = 0.03), with steers consuming 0% menthol having the greatest BW and steers that consumed 0

  20. The Evolution of Volatile Production in Comet C-2009 P1(Garradd) During its 2011-2012 Apparition

    Science.gov (United States)

    Gicquel, A.; Milam, S. N.; Coulson, I. M.; Villaneuva, G. L.; Cordiner, M. A.; Charnley, S. B.; DiSanti, M. A.; Mumma, M. J.; Szutowicz, S.

    2015-01-01

    We report observations at millimeter and submillimeter wavelengths of comet C/2009 P1 (Garradd) from 2011 December 28 to 2012 April 24, using the Arizona Radio Observatory submillimeter telescope (SMT) and the James Clerk Maxwell Telescope (JCMT). Garradd is a dynamically young long-period comet from the Oort Cloud, with a periodicity of 127,000 years, that reached perihelion on 2011 December 23 (at Heliocentric distance (Rh) = 1.55 Astronomical Units and delta = 20.1 Astronomical Units ) and made its closest approach to the Earth on 2012 March 05 (at Heliocentric distance (Rh) = 1.84 Astronomical Units and delta = 1.26 Astronomical Units). We obtained gas production rates, and molecular abundances relative to water for HCN, ortho-H2CO, CS, CO and CH3OH. A rotational temperature, T (sub rot) approximately equal to 50 degrees Kelvin, was determined by observing multiple methanol lines with the JCMT. By averaging the abundance ratio relative to water from the SMT and the JCMT we derive: CO: 7.03 plus or minus 1.84 percent, HCN: 0.04 plus or minus 0.01 percent, ortho H2CO: 0.14 plus or minus 0.03 percent as a parent molecule (and 0.28 plus or minus 0.06 percent as an extended source), CS: 0.03 plus or minus 0.01 percent and CH3OH: 3.11 for a range from plus 1:86 to minus 0.51 percent. We concluded that Garradd is normal in CH3OH, depleted in HCN, ortho-H2CO and CS and slightly enriched in CO with respect to typically observed cometary mixing ratios. We also studied the temporal evolution of HCN and CO and find that the production of HCN has a trend similar to water (but with short-term variation), with a decrease after perihelion, while that of CO shows contrary behavior: remaining constant or increasing after perihelion.

  1. Plasma concentrations of cyclic volatile methylsiloxanes (cVMS) in pregnant and postmenopausal Norwegian women and self-reported use of personal care products (PCPs).

    Science.gov (United States)

    Hanssen, Linda; Warner, Nicholas A; Braathen, Tonje; Odland, Jon Ø; Lund, Eiliv; Nieboer, Evert; Sandanger, Torkjel M

    2013-01-01

    Dermal application of personal care products (PCPs) is considered an important human exposure route for siloxanes. Their presence as minor or major constituents in many personal care products (PCPs) and cosmetics is of concern for human exposure. The aim of this study was to quantify cyclic volatile methylsiloxanes (cVMS) in blood plasma of pregnant and postmenopausal women, and to investigate possible links to self-reported use of PCPs for the latter group. Participants were recruited from two studies, namely the Norwegian Women and Cancer Study (NOWAC) and the North Norwegian Mother-and-child Study (MISA). For the NOWAC cohort, 94 plasma samples from postmenopausal women were analyzed (blood drawn in 2005) and information about PCP use and breast implants was derived from a self-administered questionnaire. In the MISA study, the collection of the plasma samples (blood drawn in 2009) constituted a re-sampling because the original serum vacutainers used were contaminated with cVMS. D4 (octamethylcyclotetrasiloxane) was the dominant compound in plasma for both cohorts. For the NOWAC samples, more than 85% of the women had D4 concentrations above the LOQ (2.74 ng/mL), while the detection frequency was only 18% for the MISA participants. The highest cVMS plasma concentrations were observed for D4: 12.7 ng/mL (NOWAC) and 2.69 ng/mL (MISA). For the other cVMS, decamethylcyclopentasiloxane (D5) and dodecameth