WorldWideScience

Sample records for voice loop system

  1. Voice integrated systems

    Science.gov (United States)

    Curran, P. Mike

    1977-01-01

    The program at Naval Air Development Center was initiated to determine the desirability of interactive voice systems for use in airborne weapon systems crew stations. A voice recognition and synthesis system (VRAS) was developed and incorporated into a human centrifuge. The speech recognition aspect of VRAS was developed using a voice command system (VCS) developed by Scope Electronics. The speech synthesis capability was supplied by a Votrax, VS-5, speech synthesis unit built by Vocal Interface. The effects of simulated flight on automatic speech recognition were determined by repeated trials in the VRAS-equipped centrifuge. The relationship of vibration, G, O2 mask, mission duration, and cockpit temperature and voice quality was determined. The results showed that: (1) voice quality degrades after 0.5 hours with an O2 mask; (2) voice quality degrades under high vibration; and (3) voice quality degrades under high levels of G. The voice quality studies are summarized. These results were obtained with a baseline of 80 percent recognition accuracy with VCS.

  2. Remote Voice Detection System

    Science.gov (United States)

    2007-06-25

    back to the laser Doppler vibrometer and the digital camera, respectively. Mechanical beam steering mirror modules, such as galvanometer steering...mirror module 43 in accordance with this invention. An appropriate galvanometer -based tracker system has been used for tracking eye motion during laser

  3. LABORATORY VOICE DATA ENTRY SYSTEM.

    Energy Technology Data Exchange (ETDEWEB)

    PRAISSMAN,J.L.SUTHERLAND,J.C.

    2003-04-01

    We have assembled a system using a personal computer workstation equipped with standard office software, an audio system, speech recognition software and an inexpensive radio-based wireless microphone that permits laboratory workers to enter or modify data while performing other work. Speech recognition permits users to enter data while their hands are holding equipment or they are otherwise unable to operate a keyboard. The wireless microphone allows unencumbered movement around the laboratory without a ''tether'' that might interfere with equipment or experimental procedures. To evaluate the potential of voice data entry in a laboratory environment, we developed a prototype relational database that records the disposal of radionuclides and/or hazardous chemicals Current regulations in our laboratory require that each such item being discarded must be inventoried and documents must be prepared that summarize the contents of each container used for disposal. Using voice commands, the user enters items into the database as each is discarded. Subsequently, the program prepares the required documentation.

  4. Improving Quality of Voice Conversion Systems

    Science.gov (United States)

    Farhid, M.; Tinati, M. A.

    New improvement scheme for voice conversion are proposed in this paper. We take Human factor cepstral coefficients (HFCC), a modification of MFCC that uses the known relationship between center frequency and critical bandwidth from human psychoacoustics to decouple filter bandwidth from filter spacing, as the basic feature. We propose U/V (Unvoiced/Voiced) decision rule such that two sets of codebooks are used to capture the difference between unvoiced and voiced segments of the source speaker. Moreover, we apply three schemes to refine the synthesized voice, including pitch refinement, energy equalization, and frame concatenation. The acceptable performance of the voice conversion system can be verified through ABX listening test and MOS grad.

  5. Voice Quality in Mobile Telecommunication System

    Directory of Open Access Journals (Sweden)

    Evaldas Stankevičius

    2013-05-01

    Full Text Available The article deals with methods measuring the quality of voice transmitted over the mobile network as well as related problem, algorithms and options. It presents the created voice quality measurement system and discusses its adequacy as well as efficiency. Besides, the author presents the results of system application under the optimal hardware configuration. Under almost ideal conditions, the system evaluates the voice quality with MOS 3.85 average estimate; while the standardized TEMS Investigation 9.0 has 4.05 average MOS estimate. Next, the article presents the discussion of voice quality predictor implementation and investigates the predictor using nonlinear and linear prediction methods of voice quality dependence on the mobile network settings. Nonlinear prediction using artificial neural network resulted in the correlation coefficient of 0.62. While the linear prediction method using the least mean squares resulted in the correlation coefficient of 0.57. The analytical expression of voice quality features from the three network parameters: BER, C / I, RSSI is given as well.Article in Lithuanian

  6. METHODS FOR QUALITY ENHANCEMENT OF USER VOICE SIGNAL IN VOICE AUTHENTICATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    O. N. Faizulaieva

    2014-03-01

    Full Text Available The reasonability for the usage of computer systems user voice in the authentication process is proved. The scientific task for improving the signal/noise ratio of the user voice signal in the authentication system is considered. The object of study is the process of input and output of the voice signal of authentication system user in computer systems and networks. Methods and means for input and extraction of voice signal against external interference signals are researched. Methods for quality enhancement of user voice signal in voice authentication systems are suggested. As modern computer facilities, including mobile ones, have two-channel audio card, the usage of two microphones is proposed in the voice signal input system of authentication system. Meanwhile, the task of forming a lobe of microphone array in a desired area of voice signal registration (100 Hz to 8 kHz is solved. The usage of directional properties of the proposed microphone array gives the possibility to have the influence of external interference signals two or three times less in the frequency range from 4 to 8 kHz. The possibilities for implementation of space-time processing of the recorded signals using constant and adaptive weighting factors are investigated. The simulation results of the proposed system for input and extraction of signals during digital processing of narrowband signals are presented. The proposed solutions make it possible to improve the value of the signal/noise ratio of the useful signals recorded up to 10, ..., 20 dB under the influence of external interference signals in the frequency range from 4 to 8 kHz. The results may be useful to specialists working in the field of voice recognition and speaker’s discrimination.

  7. Loop equations from differential systems

    CERN Document Server

    Eynard, Bertrand; Marchal, Olivier

    2016-01-01

    To any differential system $d\\Psi=\\Phi\\Psi$ where $\\Psi$ belongs to a Lie group (a fiber of a principal bundle) and $\\Phi$ is a Lie algebra $\\mathfrak g$ valued 1-form on a Riemann surface $\\Sigma$, is associated an infinite sequence of "correlators" $W_n$ that are symmetric $n$-forms on $\\Sigma^n$. The goal of this article is to prove that these correlators always satisfy "loop equations", the same equations satisfied by correlation functions in random matrix models, or the same equations as Virasoro or W-algebra constraints in CFT.

  8. Voice Activated Cockpit Management Systems: Voice-Flight NexGen Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Speaking to the cockpit as a method of system management in flight can become an effective interaction method, since voice communication is very efficient. Automated...

  9. DSP Based System for Real time Voice Synthesis Applications Development

    CERN Document Server

    Arsinte, Radu; Miron, Costin

    2008-01-01

    This paper describes an experimental system designed for development of real time voice synthesis applications. The system is composed from a DSP coprocessor card, equipped with an TMS320C25 or TMS320C50 chip, voice acquisition module (ADDA2),host computer (IBM-PC compatible), software specific tools.

  10. Increase in Organization Effectiveness Using Voice Analysis: The System Approach

    Directory of Open Access Journals (Sweden)

    Lina Bartkienė

    2011-04-01

    Full Text Available The main purpose of this article is to analyze literature related to the system theory and to present the system of increase in organization effectiveness using voice analysis. The concepts of the system approach were analyzed, the definition of the system, its components and classification were discussed. Following the principles of the system theory, the system of increase in organization effectiveness using voice analysis was designed. Each element was briefly discussed, i.e. processes influencing the employee, the environment, voice analysis system, expert system, prime and final organizational effectiveness. In addition, the relations between these elements were indentified. Article in Lithuanian

  11. External Tank CIL Closed Loop Verification System

    Science.gov (United States)

    Hartley, Eugene A., Jr.

    2005-01-01

    Lockheed Martin was requested to develop a closed loop CIL system following the Challenger accident. The system that was developed has proven to be very robust with minimal problems since implementation, having zero escapes in the last 7 years (27 External Tanks). We are currently investigating expansion of the CIL Closed Loop system to include "MI" CILs.

  12. A Voice Operated Tour Planning System for Autonomous Mobile Robots

    Directory of Open Access Journals (Sweden)

    Charles V. Smith Iii

    2010-06-01

    Full Text Available Control systems driven by voice recognition software have been implemented before but lacked the context driven approach to generate relevant responses and actions. A partially voice activated control system for mobile robotics is presented that allows an autonomous robot to interact with people and the environment in a meaningful way, while dynamically creating customized tours. Many existing control systems also require substantial training for voice application. The system proposed requires little to no training and is adaptable to chaotic environments. The traversable area is mapped once and from that map a fully customized route is generated to the user

  13. Simple system for locating ground loops.

    Science.gov (United States)

    Bellan, P M

    2007-06-01

    A simple low-cost system for rapid identification of the cables causing ground loops in complex instrumentation configurations is described. The system consists of an exciter module that generates a 100 kHz ground loop current and a detector module that determines which cable conducts this test current. Both the exciter and detector are magnetically coupled to the ground circuit so there is no physical contact to the instrumentation system under test.

  14. Internet-Based System for Voice Communication With the ISS

    Science.gov (United States)

    Chamberlain, James; Myers, Gerry; Clem, David; Speir, Terri

    2005-01-01

    The Internet Voice Distribution System (IVoDS) is a voice-communication system that comprises mainly computer hardware and software. The IVoDS was developed to supplement and eventually replace the Enhanced Voice Distribution System (EVoDS), which, heretofore, has constituted the terrestrial subsystem of a system for voice communications among crewmembers of the International Space Station (ISS), workers at the Payloads Operations Center at Marshall Space Flight Center, principal investigators at diverse locations who are responsible for specific payloads, and others. The IVoDS utilizes a communication infrastructure of NASA and NASArelated intranets in addition to, as its name suggests, the Internet. Whereas the EVoDS utilizes traditional circuitswitched telephony, the IVoDS is a packet-data system that utilizes a voice over Internet protocol (VOIP). Relative to the EVoDS, the IVoDS offers advantages of greater flexibility and lower cost for expansion and reconfiguration. The IVoDS is an extended version of a commercial Internet-based voice conferencing system that enables each user to participate in only one conference at a time. In the IVoDS, a user can receive audio from as many as eight conferences simultaneously while sending audio to one of them. The IVoDS also incorporates administrative controls, beyond those of the commercial system, that provide greater security and control of the capabilities and authorizations for talking and listening afforded to each user.

  15. A theory of desynchronisable closed loop system

    Directory of Open Access Journals (Sweden)

    Harsh Beohar

    2010-10-01

    Full Text Available The task of implementing a supervisory controller is non-trivial, even though different theories exist that allow automatic synthesis of these controllers in the form of automata. One of the reasons for this discord is due to the asynchronous interaction between a plant and its controller in implementations, whereas the existing supervisory control theories assume synchronous interaction. As a consequence the implementation suffer from the so-called inexact synchronisation problem. In this paper we address the issue of inexact synchronisation in a process algebraic setting, by solving a more general problem of refinement. We construct an asynchronous closed loop system by introducing a communication medium in a given synchronous closed loop system. Our goal is to find sufficient conditions under which a synchronous closed loop system is branching bisimilar to its corresponding asynchronous closed loop system.

  16. The linear position tracking servo system using a linear voice-coil motor

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    More and more linear servo systems have been used in servo applications. Direct drive technology can greatly increase the bandwidth and the tracking accuracy. A position servo-system based on linear voice-coil motor was designed for one linear oscillation movement application. Besides the conventional position, speed and current control loops, the speed and acceleration feed-forward control of command position signal were also used. The experimental test proved the correctness of the design, and the system can track the given periodic sinnsoid position command signal of 15Hz with high accuracy. The linear voice-coil motor is very suitable for short stroke position tracking application with high dynamic response.

  17. Voice-Controlled Artificial Handspeak System

    Directory of Open Access Journals (Sweden)

    Carlo Fonda

    2014-01-01

    Full Text Available A man-machine interaction project is described which aims to establish an automated voice to sign language translator for communication with the deaf using integrated open technologies. The first prototype consists of a robotic hand designed with OpenSCAD and manufactured with a low-cost 3D printer ─which smoothly reproduces the alphabet of the sign language controlled by voice only. The core automation comprises an Arduino UNO controller used to activate a set of servo motors that follow instructions from a Raspberry Pi mini-computer having installed the open source speech recognition engine Julius. We discuss its features, limitations and possible future developments.

  18. EXPERIMENTAL STUDY OF FIRMWARE FOR INPUT AND EXTRACTION OF USER’S VOICE SIGNAL IN VOICE AUTHENTICATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    O. N. Faizulaieva

    2014-09-01

    Full Text Available Scientific task for improving the signal-to-noise ratio for user’s voice signal in computer systems and networks during the process of user’s voice authentication is considered. The object of study is the process of input and extraction of the voice signal of authentication system user in computer systems and networks. Methods and means for input and extraction of the voice signal on the background of external interference signals are investigated. Ways for quality improving of the user’s voice signal in systems of voice authentication are investigated experimentally. Firmware means for experimental unit of input and extraction of the user’s voice signal against external interference influence are considered. As modern computer means, including mobile, have two-channel audio card, two microphones are used in the voice signal input. The distance between sonic-wave sensors is 20 mm and it provides forming one direction pattern lobe of microphone array in a desired area of voice signal registration (from 100 Hz to 8 kHz. According to the results of experimental studies, the usage of directional properties of the proposed microphone array and space-time processing of the recorded signals with implementation of constant and adaptive weighting factors has made it possible to reduce considerably the influence of interference signals. The results of firmware experimental studies for input and extraction of the user’s voice signal against external interference influence are shown. The proposed solutions will give the possibility to improve the value of the signal/noise ratio of the useful signals recorded up to 20 dB under the influence of external interference signals in the frequency range from 4 to 8 kHz. The results may be useful to specialists working in the field of voice recognition and speaker discrimination.

  19. Voice-Controlled Artificial Handspeak System

    Directory of Open Access Journals (Sweden)

    Jonathan Gatti

    2014-04-01

    Full Text Available A man-machine interaction project is described whic h aims to establish an automated voice to sign language translator for communication with the deaf using integrated open technologies. The first prototype consists of a robotic hand designed with OpenSCAD and manufactured with a low-cost 3D printer which smoothly reproduces the alphabet of the sign language controlled by voice only. The core automation comprises an Arduino UNO controller used to activate a set of servo motors that follow instructions from a Raspberry Pi mini-computer havi ng installed the open source speech recognition eng ine Julius. We discuss its features, limitations and po ssible future developmen

  20. Controlling An Electric Car Starter System Through Voice

    Directory of Open Access Journals (Sweden)

    A.B. Muhammad Firdaus

    2015-04-01

    Full Text Available Abstract These days automotive has turned into a stand out amongst the most well-known modes of transportation on the grounds that a large number of Malaysians could bear to have an auto. There are numerous decisions of innovations in auto that have in the market. One of the engineering is voice controlled framework. Voice Recognition is the procedure of consequently perceiving a certain statement talked by a specific speaker focused around individual data included in discourse waves. This paper is to make an car controlled by voice of human. An essential pre-processing venture in Voice Recognition systems is to recognize the vicinity of noise. Sensitivity to speech variability lacking recognition precision and helplessness to mimic are among the principle specialized obstacles that keep the far reaching selection of speech-based recognition systems. Voice recognition systems work sensibly well with a quiet conditions however inadequately under loud conditions or in twisted channels. The key focus of the project is to control an electric car starter system.

  1. On closed loop transient response system identification

    Directory of Open Access Journals (Sweden)

    Christer Dalen

    2016-10-01

    Full Text Available Some methods for transient closed loop step response system identification presented in the literature are reviewed. Interestingly some errors in a method published in the early 80's where propagated into a recently published method. These methods are reviewed and some improved methods are suggested and presented. The methods are compared against each other on some closed loop system examples, e.g. a well pipeline-riser severe-slugging flow regime example, using Monte Carlo simulations for comparison of the methods.

  2. A new VOX technique for reducing noise in voice communication systems. [voice operated keying

    Science.gov (United States)

    Morris, C. F.; Morgan, W. C.; Shack, P. E.

    1974-01-01

    A VOX technique for reducing noise in voice communication systems is described which is based on the separation of voice signals into contiguous frequency-band components with the aid of an adaptive VOX in each band. It is shown that this processing scheme can effectively reduce both wideband and narrowband quasi-periodic noise since the threshold levels readjust themselves to suppress noise that exceeds speech components in each band. Results are reported for tests of the adaptive VOX, and it is noted that improvements can still be made in such areas as the elimination of noise pulses, phoneme reproduction at high-noise levels, and the elimination of distortion introduced by phase delay.

  3. IBM Voice Conversion Systems for 2007 TC-STAR Evaluation

    Institute of Scientific and Technical Information of China (English)

    SHUANG Zhiwei; Raimo Bakis; QIN Yong

    2008-01-01

    This paper proposes a novel voice conversion method by frequency warping.The frequency warp-ing function is generated based on mapping formants of the source speaker and the target speaker.In addi-tion to frequency warping,fundamental frequency adjustment,spectral envelope equalization,breathiness addition,and duration modification are also used to improve the similarity to the target speaker.The pro-posed voice conversion method needs only a very small amount of training data for generating the warping function,thereby greatly facilitating its application.Systems based on the proposed method were used for the 2007 TC-STAR intra-lingual voice conversion evaluation for English and Spanish and a cross-lingual voice conversion evaluation for Spanish.The evaluation results show that the proposed method can achieve a much better quality of converted speech than other methods as well as a good balance between quality and similarity.The IBM1 system was ranked No.1 for English evaluation and No.2 for Spanish evaluation.Evaluation results also show that the proposed method is a convenient and competitive method for cross-lingual voice conversion tasks.

  4. Closed Loop System Identification with Genetic Algorithms

    Science.gov (United States)

    Whorton, Mark S.

    2004-01-01

    High performance control design for a flexible space structure is challenging since high fidelity plant models are di.cult to obtain a priori. Uncertainty in the control design models typically require a very robust, low performance control design which must be tuned on-orbit to achieve the required performance. Closed loop system identi.cation is often required to obtain a multivariable open loop plant model based on closed-loop response data. In order to provide an accurate initial plant model to guarantee convergence for standard local optimization methods, this paper presents a global parameter optimization method using genetic algorithms. A minimal representation of the state space dynamics is employed to mitigate the non-uniqueness and over-parameterization of general state space realizations. This control-relevant system identi.cation procedure stresses the joint nature of the system identi.cation and control design problem by seeking to obtain a model that minimizes the di.erence between the predicted and actual closed-loop performance.

  5. A singing voices synthesis system to characterize vocal registers using ARX-LF model

    OpenAIRE

    Motoda, Hiroki; Akagi, Masato

    2013-01-01

    This paper proposes a singing voices synthesis system to synthesize singing voices having characteristics of vocal registers, such as vocal fly, modal and falsetto. Human can sing songs naturally in wide range of frequency by training how to use vocal fold vibrations to represent vocal registers. However, even state-of-the-art singing voices synthesis systems cannot produce vocal registers appropriately. Naturalness of the synthesized singing voices using these systems is reduced in low and h...

  6. Multiple Flow Loop SCADA System Implemented on the Production Prototype Loop

    Energy Technology Data Exchange (ETDEWEB)

    Baily, Scott A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dalmas, Dale Allen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wheat, Robert Mitchell [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Woloshun, Keith Albert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dale, Gregory E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-16

    The following report covers FY 15 activities to develop supervisory control and data acquisition (SCADA) system for the Northstar Moly99 production prototype gas flow loop. The goal of this effort is to expand the existing system to include a second flow loop with a larger production-sized blower. Besides testing the larger blower, this system will demonstrate the scalability of our solution to multiple flow loops.

  7. Voice and GPS Based Navigation System For Visually Impaired

    Directory of Open Access Journals (Sweden)

    Harsha Gawari

    2014-04-01

    Full Text Available The paper represents the architecture and implementation of a system that will help to navigate the visually impaired people. The system designed uses GPS and voice recognition along with obstacle avoidance for the purpose of guiding visually impaired. The visually impaired person issues the command and receives the direction response using audio signals. The latitude and longitude values are received continuously from the GPS receiver. The directions are given to the user with the help of audio signals. An obstacle detector is used to help the user to avoid obstacles by sending an audio message.GPS receivers use NMEA standard. With the advancement in voice recognition it becomes easier to issue commands regarding directions to the visually impaired.

  8. Smart Homes with Voice Activated Systems for Disabled People

    Directory of Open Access Journals (Sweden)

    Bekir Busatlic

    2017-02-01

    Full Text Available Smart home refers to the application of various technologies to semi-unsupervised home control It refers to systems that control temperature, lighting, door locks, windows and many other appliances. The aim of this study was to design a system that will use existing technology to showcase how it can benefit people with disabilities. This work uses only off-the-shelf products (smart home devices and controllers, speech recognition technology, open-source code libraries. The Voice Activated Smart Home application was developed to demonstrate online grocery shopping and home control using voice comments and tested by measuring its effectiveness in performing tasks as well as its efficiency in recognizing user speech input.

  9. Voice Technology Design Guides for Navy Training Systems.

    Science.gov (United States)

    1983-03-01

    81 mi4000111 b bleck ehm ~m) - This project was directed toward gathering information about applications of automated speech technology (AST) and...environmental events. automated performance measurement, and a strong voice interaction between the trainee and the system. Both successes and difficulties have...80-C-0057-1 Strong interaction with the user community is necessary throughout the curriculum development. A subject matter expert, ideally, should

  10. Causal Loop Analysis of coastal geomorphological systems

    Science.gov (United States)

    Payo, Andres; Hall, Jim W.; French, Jon; Sutherland, James; van Maanen, Barend; Nicholls, Robert J.; Reeve, Dominic E.

    2016-03-01

    As geomorphologists embrace ever more sophisticated theoretical frameworks that shift from simple notions of evolution towards single steady equilibria to recognise the possibility of multiple response pathways and outcomes, morphodynamic modellers are facing the problem of how to keep track of an ever-greater number of system feedbacks. Within coastal geomorphology, capturing these feedbacks is critically important, especially as the focus of activity shifts from reductionist models founded on sediment transport fundamentals to more synthesist ones intended to resolve emergent behaviours at decadal to centennial scales. This paper addresses the challenge of mapping the feedback structure of processes controlling geomorphic system behaviour with reference to illustrative applications of Causal Loop Analysis at two study cases: (1) the erosion-accretion behaviour of graded (mixed) sediment beds, and (2) the local alongshore sediment fluxes of sand-rich shorelines. These case study examples are chosen on account of their central role in the quantitative modelling of geomorphological futures and as they illustrate different types of causation. Causal loop diagrams, a form of directed graph, are used to distil the feedback structure to reveal, in advance of more quantitative modelling, multi-response pathways and multiple outcomes. In the case of graded sediment bed, up to three different outcomes (no response, and two disequilibrium states) can be derived from a simple qualitative stability analysis. For the sand-rich local shoreline behaviour case, two fundamentally different responses of the shoreline (diffusive and anti-diffusive), triggered by small changes of the shoreline cross-shore position, can be inferred purely through analysis of the causal pathways. Explicit depiction of feedback-structure diagrams is beneficial when developing numerical models to explore coastal morphological futures. By explicitly mapping the feedbacks included and neglected within a

  11. Interactive Voice/Web Response System in clinical research.

    Science.gov (United States)

    Ruikar, Vrishabhsagar

    2016-01-01

    Emerging technologies in computer and telecommunication industry has eased the access to computer through telephone. An Interactive Voice/Web Response System (IxRS) is one of the user friendly systems for end users, with complex and tailored programs at its backend. The backend programs are specially tailored for easy understanding of users. Clinical research industry has experienced revolution in methodologies of data capture with time. Different systems have evolved toward emerging modern technologies and tools in couple of decades from past, for example, Electronic Data Capture, IxRS, electronic patient reported outcomes, etc.

  12. Voice Interactive Systems Technology (VIST) Research.

    Science.gov (United States)

    1984-01-01

    Z ’-’,- FIN J. , F: .J. *. I.1. ~ ~UNCLASSIFIED S;ECURITY CLASSIFICATION OF THIS PAGE...Ground DEC PDP-11 /45 SYSTEM GEERATION INFORMiTION RSX-11M Operating System Initializat ion Command File: File Name: INIT7.CMD Contents: SET/SPEED=TT7...34 " • - - - ’ ’ v " ’ ’ .- ’ % ’ - * ’ k’" ’ " ’ ’ ’ *. , , ,", . . . . .- - . . , . .- ’ ." - . .- . , . % . - -,- - , z , . . . . -*. . * .* -. 4 --

  13. Multimodal user input to supervisory control systems - Voice-augmented keyboard

    Science.gov (United States)

    Mitchell, Christine M.; Forren, Michelle G.

    1987-01-01

    The use of a voice-augmented keyboard input modality is evaluated in a supervisory control application. An implementation of voice recognition technology in supervisory control is proposed: voice is used to request display pages, while the keyboard is used to input system reconfiguration commands. Twenty participants controlled GT-MSOCC, a high-fidelity simulation of the operator interface to a NASA ground control system, via a workstation equipped with either a single keyboard or a voice-augmented keyboard. Experimental results showed that in all cases where significant performance differences occurred, performance with the voice-augmented keyboard modality was inferior to and had greater variance than the keyboard-only modality. These results suggest that current moderately priced voice recognition systems are an inappropriate human-computer interaction technology in supervisory control systems.

  14. Human factors research problems in electronic voice warning system design

    Science.gov (United States)

    Simpson, C. A.; Williams, D. H.

    1975-01-01

    The speech messages issued by voice warning systems must be carefully designed in accordance with general principles of human decision making processes, human speech comprehension, and the conditions in which the warnings can occur. The operator's effectiveness must not be degraded by messages that are either inappropriate or difficult to comprehend. Important experimental variables include message content, linguistic redundancy, signal/noise ratio, interference with concurrent tasks, and listener expectations generated by the pragmatic or real world context in which the messages are presented.

  15. Portable EGG recording system based on a digital voice recorder.

    Science.gov (United States)

    Jang, J-K; Shieh, M-J; Kuo, T-S; Jaw, F-S

    2009-01-01

    Cutaneous electrogastrogram (EGG) recording offers the benefit of non-invasive gastrointestinal diagnosis. With long-term ambulatory recording of signals, researchers and clinicians could have more opportunities to investigate and analyse paroxysmal or acute symptoms. A portable EGG system based on a digital voice recorder (DVR) is designed for long-term recording of cutaneous EGG signals. The system consists of electrodes, an EGG amplifier, a modulator, and a DVR. Online monitoring and off-line acquisition of EGG are handled by software. A special design employing an integrated timer circuit is used to modulate the EGG frequency to meet the input requirements of the DVR. This approach involves low supply voltage and low power consumption. Software demodulation is used to simplify the complexity of the system, and is helpful in reducing the size of the portable device. By using surface-mount devices (SMD) and a low-power design, the system is robust, compact, and suitable for long-term portable recording. As a result, researchers can record an ambulatory EGG signal by means of the proposed circuits in conjunction with an up-to-date voice-recording device.

  16. Quantum hysteresis loops in microscopic system: The loop area as a dynamical parameter

    Indian Academy of Sciences (India)

    Chandan Kumar Mondal; S P Bhattacharyya

    2001-01-01

    The area enclosed by hysteresis loops in a periodically forced bistable microscopic system at zero-temperature is examined by using the time dependent Hellmann–Feynman theorem and the Fourier grid Hamiltonian recipe for solving time-dependent Schrödinger equation. Effects of non-zero temperatures are explored with reference to a symmetric double well potential. The barrier crossing or, relaxation rates are shown to correlate systematically with the area of the loop. The possible use of hysteresis loop area in designing field parameters for optimal control is suggested.

  17. Chemical Looping Combustion Reactions and Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sarofim, Adel; Lighty, JoAnn; Smith, Philip; Whitty, Kevin; Eyring, Edward; Sahir, Asad; Alvarez, Milo; Hradisky, Michael; Clayton, Chris; Konya, Gabor; Baracki, Richard; Kelly, Kerry

    2014-03-01

    , they performed a sensitivity analysis for velocity, height and polydispersity and compared results against literature data for experimental studies of CLC beds with no reaction. Finally, they present an optimization space using simple non-reactive configurations. In Subtask 5.3, through a series of experimental studies, behavior of a variety of oxygen carriers with different loadings and manufacturing techniques was evaluated under both oxidizing and reducing conditions. The influences of temperature, degree of carrier conversion and thermodynamic driving force resulting from the difference between equilibrium and system O{sub 2} partial pressures were evaluated through several experimental campaigns, and generalized models accounting for these influences were developed to describe oxidation and oxygen release. Conversion of three solid fuels with widely ranging reactivities was studied in a small fluidized bed system, and all but the least reactive fuel (petcoke) were rapidly converted by oxygen liberated from the CLOU carrier. Attrition propensity of a variety of carriers was also studied, and the carriers produced by freeze granulation or impregnation of preformed substrates displayed the lowest rates of attrition. Subtask 5.4 focused on gathering kinetic data for a copper-based oxygen carrier to assist with modeling of a functioning chemical looping reactor. The kinetics team was also responsible for the development and analysis of supported copper oxygen carrier material.

  18. Control and optimization system and method for chemical looping processes

    Science.gov (United States)

    Lou, Xinsheng; Joshi, Abhinaya; Lei, Hao

    2015-02-17

    A control system for optimizing a chemical loop system includes one or more sensors for measuring one or more parameters in a chemical loop. The sensors are disposed on or in a conduit positioned in the chemical loop. The sensors generate one or more data signals representative of an amount of solids in the conduit. The control system includes a data acquisition system in communication with the sensors and a controller in communication with the data acquisition system. The data acquisition system receives the data signals and the controller generates the control signals. The controller is in communication with one or more valves positioned in the chemical loop. The valves are configured to regulate a flow of the solids through the chemical loop.

  19. Evaluation of voice codecs for the Australian mobile satellite system

    Science.gov (United States)

    Bundrock, Tony; Wilkinson, Mal

    1990-01-01

    The evaluation procedure to choose a low bit rate voice coding algorithm is described for the Australian land mobile satellite system. The procedure is designed to assess both the inherent quality of the codec under 'normal' conditions and its robustness under 'severe' conditions. For the assessment, normal conditions were chosen to be random bit error rate with added background acoustic noise and the severe condition is designed to represent burst error conditions when mobile satellite channel suffers from signal fading due to roadside vegetation. The assessment is divided into two phases. First, a reduced set of conditions is used to determine a short list of candidate codecs for more extensive testing in the second phase. The first phase conditions include quality and robustness and codecs are ranked with a 60:40 weighting on the two. Second, the short listed codecs are assessed over a range of input voice levels, BERs, background noise conditions, and burst error distributions. Assessment is by subjective rating on a five level opinion scale and all results are then used to derive a weighted Mean Opinion Score using appropriate weights for each of the test conditions.

  20. Chemical Looping Combustion Reactions and Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sarofim, Adel; Lighty, JoAnn; Smith, Philip; Whitty, Kevin; Eyring, Edward; Sahir, Asad; Alvarez, Milo; Hradisky, Michael; Clayton, Chris; Konya, Gabor; Baracki, Richard; Kelly, Kerry

    2011-07-01

    Chemical Looping Combustion (CLC) is one promising fuel-combustion technology, which can facilitate economic CO2 capture in coal-fired power plants. It employs the oxidation/reduction characteristics of a metal, or oxygen carrier, and its oxide, the oxidizing gas (typically air) and the fuel source may be kept separate. This work focused on two classes of oxygen carrier, one that merely undergoes a change in oxidation state, such as Fe3O4/Fe2O3 and one that is converted from its higher to its lower oxidation state by the release of oxygen on heating, i.e., CuO/Cu2O. This topical report discusses the results of four complementary efforts: (1) the development of process and economic models to optimize important design considerations, such as oxygen carrier circulation rate, temperature, residence time; (2) the development of high-performance simulation capabilities for fluidized beds and the collection, parameter identification, and preliminary verification/uncertainty quantification (3) the exploration of operating characteristics in the laboratory-scale bubbling bed reactor, with a focus on the oxygen carrier performance, including reactivity, oxygen carrying capacity, attrition resistance, resistance to deactivation, cost and availability (4) the identification of mechanisms and rates for the copper, cuprous oxide, and cupric oxide system using thermogravimetric analysis.

  1. Progress of energy system with chemical-looping combustion

    Institute of Scientific and Technical Information of China (English)

    JIN HongGuang; HONG Hui; HAN Tao

    2009-01-01

    Chemical-looping combustion with zero energy penalty of CO2 separation is a significant breakthrough in resolving energy and environment problems for power generation systems. This paper summarizes the research on energy systems with chemical-looping combustion conducted in recent years, discloses the underlying mechanism of energy release of chemical-looping combustion, describes the trends of the key technology development, and presents the proposed chemicaMooping combustion thermal cycles. This paper may provide a new direction to the synthesis of the next-generation energy system compatible with environment.

  2. Closed-Loop Tension Control System for Injection Moulding Machine

    African Journals Online (AJOL)

    Closed-Loop Tension Control System for Injection Moulding Machine. ... Open Access DOWNLOAD FULL TEXT ... it demonstrated a new technological advancement and the theory of moulding which prevents possible spillage occurrences.

  3. Active fault diagnosis in closed-loop uncertain systems

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik

    2006-01-01

    Fault diagnosis of parametric faults in closed-loop uncertain systems by using an auxiliary input vector is considered in this paper, i.e. active fault diagnosis (AFD). The active fault diagnosis is based directly on the socalled fault signature matrix, related to the YJBK (Youla, Jabr, Bongiorno...... and Kucera) parameterization. Conditions are given for exact detection and isolation of parametric faults in closed-loop uncertain systems....

  4. Voice Quality Estimation in Combined Radio-VoIP Networks for Dispatching Systems

    Directory of Open Access Journals (Sweden)

    Jiri Vodrazka

    2016-01-01

    Full Text Available The voice quality modelling assessment and planning field is deeply and widely theoretically and practically mastered for common voice communication systems, especially for the public fixed and mobile telephone networks including Next Generation Networks (NGN - internet protocol based networks. This article seeks to contribute voice quality modelling assessment and planning for dispatching communication systems based on Internet Protocol (IP and private radio networks. The network plan, correction in E-model calculation and default values for the model are presented and discussed.

  5. Closed-loop System Identification with New Sensors

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, K; Stoustrup, Jakob

    2008-01-01

    This paper deals with system identification of new system dynamics revealed by online introduction of new sensors in existing multi-variable linear control systems. The so-called "Hansen Scheme" utilises the dual Youla-Kucera parameterisation of all systems stabilised by a given linear controller...... to transform closed-loop system identification problems into open-loop-like problems. We show that this scheme can be formally extended to accomodate extra sensors in a nice way. The approach is illustrated on a simple simulation example....

  6. SLSF loop handling system. Volume I. Structural analysis. [LMFBR

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, H.; Cowie, A.; Ma, D.

    1978-10-01

    SLSF loop handling system was analyzed for deadweight and postulated dynamic loading conditions, identified in Chapters II and III in Volume I of this report, using a linear elastic static equivalent method of stress analysis. Stress analysis of the loop handling machine is presented in Volume I of this report. Chapter VII in Volume I of this report is a contribution by EG and G Co., who performed the work under ANL supervision.

  7. Open-loop frequency response for a chaotic masking system

    Institute of Scientific and Technical Information of China (English)

    Huang Xian-Gao; Yu Pei; Huang Wei

    2006-01-01

    In this paper, a new numerical simulation approach is proposed for the study of open-loop frequency response of a chaotic masking system. Using Chua's circuit and the Lorenz system as illustrative examples, we have shown that one can employ chaos synchronization to separate the feedback network from a chaotic masking system, and then use numerical simulation to obtain the open-loop synchronization response, the phase response, and the amplitude response of a chaotic masking system. Based on the analysis of the frequency response, we have also proved that changing the amplitude of the exciting (input) signal within normal working domain does not influence the frequency response of the chaotic masking system. The new numerical simulation method developed in this paper can be extended to consider the open-loop frequency response of other systems described by differential or difference equations.

  8. Gain Scheduling Control based on Closed-Loop System Identification

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, Klaus

    This paper deals with system identification and gain scheduling control of multi-variable nonlinear systems. We propose a novel scheme where a linear approximation of the system model is obtained in an operating point; then, a Youla-Kucera (YJBK) parameter specifying the difference between...... the first and a second operating point is identified in closed-loop using system identification methods with open-loop properties. Next, a linear controller is designed for this linearised model, and gain scheduling control can subsequently be achieved by interpolating between each controller...

  9. Line Loss Minimization of Loop Distribution Systems Using UPFC

    Science.gov (United States)

    Sayed, Mahmoud A.; Inayoshi, Nobuyuki; Takeshita, Takaharu; Ueda, Fukashi

    This paper presents an elaborated mathematical analysis of the line loss minimum conditions of loop distribution systems. In order to achieve these conditions, the Unified Power Flow Controller (UPFC), a typical Flexible AC Transmission Systems (FACTS) device that is capable of instantaneous control of transmission and distribution power flow, is used. For minimizing the total line loss of the loop distribution system, the authors propose two control schemes, the Line Inductance Compensation control and the Line Voltage Compensation control. These control schemes can be applied for controlling the UPFC in the loop distribution system according to the line parameters. The effectiveness of the proposed control schemes has been verified experimentally using a laboratory prototype in a 200V, 6kVA system.

  10. Multi-modal assessment of on-road demand of voice and manual phone calling and voice navigation entry across two embedded vehicle systems.

    Science.gov (United States)

    Mehler, Bruce; Kidd, David; Reimer, Bryan; Reagan, Ian; Dobres, Jonathan; McCartt, Anne

    2016-03-01

    One purpose of integrating voice interfaces into embedded vehicle systems is to reduce drivers' visual and manual distractions with 'infotainment' technologies. However, there is scant research on actual benefits in production vehicles or how different interface designs affect attentional demands. Driving performance, visual engagement, and indices of workload (heart rate, skin conductance, subjective ratings) were assessed in 80 drivers randomly assigned to drive a 2013 Chevrolet Equinox or Volvo XC60. The Chevrolet MyLink system allowed completing tasks with one voice command, while the Volvo Sensus required multiple commands to navigate the menu structure. When calling a phone contact, both voice systems reduced visual demand relative to the visual-manual interfaces, with reductions for drivers in the Equinox being greater. The Equinox 'one-shot' voice command showed advantages during contact calling but had significantly higher error rates than Sensus during destination address entry. For both secondary tasks, neither voice interface entirely eliminated visual demand. Practitioner Summary: The findings reinforce the observation that most, if not all, automotive auditory-vocal interfaces are multi-modal interfaces in which the full range of potential demands (auditory, vocal, visual, manipulative, cognitive, tactile, etc.) need to be considered in developing optimal implementations and evaluating drivers' interaction with the systems. Social Media: In-vehicle voice-interfaces can reduce visual demand but do not eliminate it and all types of demand need to be taken into account in a comprehensive evaluation.

  11. Hardware-in-the-loop testing of marine control system

    Directory of Open Access Journals (Sweden)

    Roger Skjetne

    2006-10-01

    Full Text Available Hardware-in-the-Loop (HIL testing is proposed as a new methodology for verification and certification of marine control systems. Formalizing such testing necessitates the development of a vocabulary and set of definitions. This paper treats these issues by constructing a framework suitable for industrial HIL test applications and certification of marine systems.

  12. Estimation of Parametric Fault in Closed-loop Systems

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Poulsen, Niels Kjølstad

    2015-01-01

    The aim of this paper is to present a method for estimation of parametric faults in closed-loop systems. The key technology applied in this paper is coprime factorization of both the dynamic system as well as the feedback controller. Using the Youla-Jabr-Bongiorno-Kucera (YJBK) parameterization...

  13. Hardware-in-the-loop testing of marine control system

    OpenAIRE

    2006-01-01

    Hardware-in-the-Loop (HIL) testing is proposed as a new methodology for verification and certification of marine control systems. Formalizing such testing necessitates the development of a vocabulary and set of definitions. This paper treats these issues by constructing a framework suitable for industrial HIL test applications and certification of marine systems.

  14. Closed loop two-echelon repairable item systems

    NARCIS (Netherlands)

    Spanjers, L.; van Ommeren, Jan C.W.; Zijm, Willem H.M.; Liberopoulos, G.; Papadopoulos, C.T.; Tan, B.; MacGregor Smith, J.; Gershwin, S.B.

    2006-01-01

    In this paper we consider closed loop two-echelon epairable item systems with repair facilities both at a number of local service centers (called bases) and at a central location (the depot). The goal of the system is to maintain a number of production facilities (one at each base) in optimal

  15. Closed loop two-echelon repairable item systems

    NARCIS (Netherlands)

    Spanjers, L.; van Ommeren, Jan C.W.; Zijm, Willem H.M.

    In this paper we consider closed loop two-echelon repairable item systems with repair facilities both at a number of local service centers (called bases) and at a central location (the depot). The goal of the system is to maintain a number of production facilities (one at each base) in optimal

  16. Subscriber loop optical distribution architecture: a cost-effective TDM/TDMA subscriber loop system

    Science.gov (United States)

    Rueda, Javier; Eldering, Charles A.

    1992-02-01

    While it is clear that the development of the laser and low loss optical fiber has had an unmistakable impact on the field of telecommunications, the deployment of optical fiber in the subscriber (local) loop is an especially challenging task. It requires development of low cost equipment that will initially be used at low bit rates (installation of subscriber loop fiber systems. For large scale deployment in the subscriber loop, the fiber optic system must provide basic telephone services with equal or better performance at a cost that is competitive with that of existing copper pair technology. In this paper we examine a number of possible fiber-to-the-home (FTTH) and fiber-to-the-curb (FTTC) architectures, and present an architecture for urban areas that is best classified as fiber-to-the-building (FTTB). We examine the costs and performance characteristics of the various networks. We show how demographic information can be used to optimize the capacity of the remote terminals. It is shown that for the demography of Spain (where in urban areas the majority of the population resides in apartment buildings with 10 or more dwellings) a remote terminal with a variable subscriber capacity presents a cost savings over remote terminals with a fixed number of subscriber channels.

  17. Exploring the anatomical encoding of voice with a mathematical model of the vocal system.

    Science.gov (United States)

    Assaneo, M Florencia; Sitt, Jacobo; Varoquaux, Gael; Sigman, Mariano; Cohen, Laurent; Trevisan, Marcos A

    2016-11-01

    The faculty of language depends on the interplay between the production and perception of speech sounds. A relevant open question is whether the dimensions that organize voice perception in the brain are acoustical or depend on properties of the vocal system that produced it. One of the main empirical difficulties in answering this question is to generate sounds that vary along a continuum according to the anatomical properties the vocal apparatus that produced them. Here we use a mathematical model that offers the unique possibility of synthesizing vocal sounds by controlling a small set of anatomically based parameters. In a first stage the quality of the synthetic voice was evaluated. Using specific time traces for sub-glottal pressure and tension of the vocal folds, the synthetic voices generated perceptual responses, which are indistinguishable from those of real speech. The synthesizer was then used to investigate how the auditory cortex responds to the perception of voice depending on the anatomy of the vocal apparatus. Our fMRI results show that sounds are perceived as human vocalizations when produced by a vocal system that follows a simple relationship between the size of the vocal folds and the vocal tract. We found that these anatomical parameters encode the perceptual vocal identity (male, female, child) and show that the brain areas that respond to human speech also encode vocal identity. On the basis of these results, we propose that this low-dimensional model of the vocal system is capable of generating realistic voices and represents a novel tool to explore the voice perception with a precise control of the anatomical variables that generate speech. Furthermore, the model provides an explanation of how auditory cortices encode voices in terms of the anatomical parameters of the vocal system.

  18. Motorcycle Start-stop System based on Intelligent Biometric Voice Recognition

    Science.gov (United States)

    Winda, A.; E Byan, W. R.; Sofyan; Armansyah; Zariantin, D. L.; Josep, B. G.

    2017-03-01

    Current mechanical key in the motorcycle is prone to bulgary, being stolen or misplaced. Intelligent biometric voice recognition as means to replace this mechanism is proposed as an alternative. The proposed system will decide whether the voice is belong to the user or not and the word utter by the user is ‘On’ or ‘Off’. The decision voice will be sent to Arduino in order to start or stop the engine. The recorded voice is processed in order to get some features which later be used as input to the proposed system. The Mel-Frequency Ceptral Coefficient (MFCC) is adopted as a feature extraction technique. The extracted feature is the used as input to the SVM-based identifier. Experimental results confirm the effectiveness of the proposed intelligent voice recognition and word recognition system. It show that the proposed method produces a good training and testing accuracy, 99.31% and 99.43%, respectively. Moreover, the proposed system shows the performance of false rejection rate (FRR) and false acceptance rate (FAR) accuracy of 0.18% and 17.58%, respectively. In the intelligent word recognition shows that the training and testing accuracy are 100% and 96.3%, respectively.

  19. Design validation and performance of closed loop gas recirculation system

    Science.gov (United States)

    Kalmani, S. D.; Joshi, A. V.; Majumder, G.; Mondal, N. K.; Shinde, R. R.

    2016-11-01

    A pilot experimental set up of the India Based Neutrino Observatory's ICAL detector has been operational for the last 4 years at TIFR, Mumbai. Twelve glass RPC detectors of size 2 × 2 m2, with a gas gap of 2 mm are under test in a closed loop gas recirculation system. These RPCs are continuously purged individually, with a gas mixture of R134a (C2H2F4), isobutane (iC4H10) and sulphur hexafluoride (SF6) at a steady rate of 360 ml/h to maintain about one volume change a day. To economize gas mixture consumption and to reduce the effluents from being released into the atmosphere, a closed loop system has been designed, fabricated and installed at TIFR. The pressure and flow rate in the loop is controlled by mass flow controllers and pressure transmitters. The performance and integrity of RPCs in the pilot experimental set up is being monitored to assess the effect of periodic fluctuation and transients in atmospheric pressure and temperature, room pressure variation, flow pulsations, uniformity of gas distribution and power failures. The capability of closed loop gas recirculation system to respond to these changes is also studied. The conclusions from the above experiment are presented. The validations of the first design considerations and subsequent modifications have provided improved guidelines for the future design of the engineering module gas system.

  20. DLMS Voice Data Entry.

    Science.gov (United States)

    1980-06-01

    between operator and computer displayed on ADM-3A 20c A-I Possible Hardware Configuration for a Multistation Cartographic VDES ...this program a Voice Recognition System (VRS) which can be used to explore the use of voice data entry ( VDE ) in the DIMS or other cartographic data...Multi-Station Cartographic Voice Data Entry System An engineering development model voice data entry system ( VDES ) could be most efficiently

  1. Closed-Loop Life Support Systems

    Science.gov (United States)

    Fisher, John W.

    2003-01-01

    Contents include the following: 1. Advanced life support requirements document-high level: (a) high level requirements and standards, (b) advanced life support requirements documents-air, food, water. 2. Example technologies that satisfy requrements: air system-carbon dioxide removal. 3. Air-sabatter. 4. International Space Station water treatment subsystem.5. Direct osmotic concentrator. 6. Mass, volume and power estimates.

  2. Loop groups, Clusters, Dimers and Integrable systems

    CERN Document Server

    Fock, V V

    2014-01-01

    We describe a class of integrable systems on Poisson submanifolds of the affine Poisson-Lie groups $\\widehat{PGL}(N)$, which can be enumerated by cyclically irreducible elements the co-extended affine Weyl groups $(\\widehat{W}\\times \\widehat{W})^\\sharp$. Their phase spaces admit cluster coordinates, whereas the integrals of motion are cluster functions. We show, that this class of integrable systems coincides with the constructed by Goncharov and Kenyon out of dimer models on a two-dimensional torus and classified by the Newton polygons. We construct the correspondence between the Weyl group elements and polygons, demonstrating that each particular integrable model admits infinitely many realisations on the Poisson-Lie groups. We also discuss the particular examples, including the relativistic Toda chains and the Schwartz-Ovsienko-Tabachnikov pentagram map.

  3. Penguins use the two-voice system to recognize each other.

    Science.gov (United States)

    Aubin, T; Jouventin, P; Hildebrand, C

    2000-06-07

    The sound-producing structure in birds is the syrinx, which is usually a two-part organ located at the junction of the bronchi. As each branch of the syrinx produces sound independently, many birds have two acoustic sources. Thirty years ago, we had anatomical, physiological and acoustical evidence of this two-voice phenomenon but no function was known. In songbirds, often these two voices with their respective harmonics are not activated simultaneously but they are obvious in large penguins and generate a beat pattern which varies between individuals. The emperor penguin breeds during the Antarctic winter, incubating and carrying its egg on its feet. Without the topographical cue of a nest, birds identify each other only by vocal means when switching duties during incubation or chick rearing. To test whether the two-voice system contains the identity code, we played back the modified call of their mate to both adults and also the modified call of their parents to chicks. Both the adults and the chicks replied to controls (two voices) but not to modified signals (one voice being experimentally suppressed). Our experiments demonstrate that the beat generated by the interaction of these two fundamental frequencies conveys information about individual identity and also propagates well through obstacles, being robust to sound degradation through the medium of bodies in a penguin colony. The two-voice structure is also clear in the call of other birds such as the king penguin, another non-nesting species, but not in the 14 other nesting penguins. We concluded that the two-voice phenomenon functions as an individual recognition system in species using few if any landmarks to meet. In penguins, this coding process, increasing the call complexity and resisting sound degradation, has evolved in parallel with the loss of territoriality.

  4. Digitalization optical open loop test system for fiber optic gyroscope

    Institute of Scientific and Technical Information of China (English)

    ZHANG Deng-wei; SHU Xiao-wu; MU Xu-dong; LIU Cheng

    2006-01-01

    In order to receive and process the open loop signal from fiber optic gyroscopes speedily,stably and expediently,and to realize the amity interface between human and machine,a digital system that can convert GPIB (general purpose interface bus ) parallel bus into Universal Serial Bus is developed.All the interface functions of GP1B and the hardware system are realized through FPGA.With a digital sampling and processing system designed with VC++ in Windows platform,the real-time controlling procedure,high-speed receiving and sending data can be carried out,and the results can be displayed too.So the design of the system is flexible,the reliability and the stability are improved,error rate is no more than 10-11,the highest bit rate is 8 MB/s and the open loop detection system for optic fiber gyros achieves standardization and complete digitalization simultaneously.

  5. Phonological systems of pediatric cochlear implant users: The acquisition of voicing

    Science.gov (United States)

    Chin, Steven B.; Oglesbee, Eric N.; Kirk, Andrew K.; Krug, Joseph E.

    2005-04-01

    Although cochlear implants are primarily auditory prostheses, they have also demonstrated their usefulness as aids to speech production and the acquisition of spoken language in children. This presentation reports on research currently being conducted at the Indiana University Medical Center on the development of phonological systems by children with five or more years of cochlear implant use in English-speaking environments. Characteristics of the feature [voice] will be examined in children with cochlear implants and in two comparison groups: adults with normal hearing and children with normal hearing. Specific aspects of voicing to be discussed include characteristic error patterns, phonetic implementation of the voicing contrast, and phonetic implementation of neutralization of the voicing contrast. Much of the evidence obtained thus far indicates that voicing acquisition in children with cochlear implants is not radically different from that of children with normal hearing. Many differences between the systems of children with cochlear implants and the ambient system thus appear to reflect the children's age as much as their hearing status. [Work supported by grants from the National Institutes of Health to Indiana University: R01DC005594 and R03DC003852.

  6. Numerical Analysis of Combined Well and Open-Closed Loops Geothermal (CWG) Systems

    Science.gov (United States)

    Park, Yu-Chul

    2016-04-01

    Open-loop geothermal heat pump (GHP) system and closed-loop heat pump systems have been used in Korea to reduce emission of greenhouse gases such as carbon dioxide (CO2). The GHP systems have the pros and cons, for example, the open-loop GHP system is good energy-efficient and the closed-loop GHP system requires minimum maintenance costs. The open-loop GHP system can be used practically only with large amount of groundwater supply. The closed-loop GHP system can be used with high costs of initial installation. The performance and efficiency of the GHP system depend on the characteristics of the GHP system itself in addition to the geologic conditions. To overcome the cons of open-loop or closed-loop GHP system, the combined well and open-closed loops geothermal (CWG) system was designed. The open-loop GHP system is surrounded with closed-loop GHP systems in the CWG system. The geothermal energy in closed-loop GHP systems is supplied by the groundwater pumped by the open-loop GHP system. In this study, 2 different types of the CWG systems (small aperture hybrid CWG system and large aperture CWG system) are estimated using numerical simulation models in the aspect of energy efficiency. This work was supported by the New & Renewable Energy Core Technology Program of the Korea Institute of Energy Technology Evaluation and Planning (KETEP), granted financial resource from the Ministry of Trade, Industry & Energy, Republic of Korea. (No.20153030111120).

  7. 75 FR 41509 - Notice of Proposed Information Collection for Public Comment; LOCCS Voice Response System Payment...

    Science.gov (United States)

    2010-07-16

    ... System Payment Vouchers for Public and Indian Housing Programs AGENCY: Office of the Assistant Secretary... Payment Vouchers for Public and Indian Housing Programs. OMB Control Number: 2577-0166. Agency form number... voice activated system. The information collected on the payment voucher will also be used as...

  8. Feedback Control Systems Loop Shaping Design with Practical Considerations

    Science.gov (United States)

    Kopsakis, George

    2007-01-01

    This paper describes loop shaping control design in feedback control systems, primarily from a practical stand point that considers design specifications. Classical feedback control design theory, for linear systems where the plant transfer function is known, has been around for a long time. But it s still a challenge of how to translate the theory into practical and methodical design techniques that simultaneously satisfy a variety of performance requirements such as transient response, stability, and disturbance attenuation while taking into account the capabilities of the plant and its actuation system. This paper briefly addresses some relevant theory, first in layman s terms, so that it becomes easily understood and then it embarks into a practical and systematic design approach incorporating loop shaping design coupled with lead-lag control compensation design. The emphasis is in generating simple but rather powerful design techniques that will allow even designers with a layman s knowledge in controls to develop effective feedback control designs.

  9. Transmission by an Embedded System with Enhancements in Voice Processing Technologies

    Directory of Open Access Journals (Sweden)

    G.Sitha Annapurna

    2014-03-01

    Full Text Available The paper reports that the robot can transmit the data such as video, audio, images. The robot can be controlled using the human voice. There are two embedded systems first one is robot controlling system(MASTER which is used to control the robot, second one is voice controlled robot(SLAVE which responds according to the instructions coming from the controlling system. These two embedded systems are communicated through wireless. We can use anyone one of wireless protocols such as IR, NFC, Bluetooth, Zigbee, WI-FI in order to establish a bridge between the MASTER and SLAVE. The voice controlled robot can understand the instructions with the help of the voice recognition system. Spinx-4 is a speech recognizer system written entirely in the java programming language.Sphinx-4 started out as a port of Sphinx-3 to the Java programming language, but evolved into a recognizer designed to be much more flexible than Sphinx-3, thus becoming an excellent platform for speech research.Sphinx-4 is an HMM-based speech recognizer. HMM stands for Hidden Markov Models, Sphinx-4 are a type of statistical model In HMM based speech recognizers.

  10. Closed-loop and robust control of quantum systems.

    Science.gov (United States)

    Chen, Chunlin; Wang, Lin-Cheng; Wang, Yuanlong

    2013-01-01

    For most practical quantum control systems, it is important and difficult to attain robustness and reliability due to unavoidable uncertainties in the system dynamics or models. Three kinds of typical approaches (e.g., closed-loop learning control, feedback control, and robust control) have been proved to be effective to solve these problems. This work presents a self-contained survey on the closed-loop and robust control of quantum systems, as well as a brief introduction to a selection of basic theories and methods in this research area, to provide interested readers with a general idea for further studies. In the area of closed-loop learning control of quantum systems, we survey and introduce such learning control methods as gradient-based methods, genetic algorithms (GA), and reinforcement learning (RL) methods from a unified point of view of exploring the quantum control landscapes. For the feedback control approach, the paper surveys three control strategies including Lyapunov control, measurement-based control, and coherent-feedback control. Then such topics in the field of quantum robust control as H(∞) control, sliding mode control, quantum risk-sensitive control, and quantum ensemble control are reviewed. The paper concludes with a perspective of future research directions that are likely to attract more attention.

  11. Closed-Loop and Robust Control of Quantum Systems

    Directory of Open Access Journals (Sweden)

    Chunlin Chen

    2013-01-01

    Full Text Available For most practical quantum control systems, it is important and difficult to attain robustness and reliability due to unavoidable uncertainties in the system dynamics or models. Three kinds of typical approaches (e.g., closed-loop learning control, feedback control, and robust control have been proved to be effective to solve these problems. This work presents a self-contained survey on the closed-loop and robust control of quantum systems, as well as a brief introduction to a selection of basic theories and methods in this research area, to provide interested readers with a general idea for further studies. In the area of closed-loop learning control of quantum systems, we survey and introduce such learning control methods as gradient-based methods, genetic algorithms (GA, and reinforcement learning (RL methods from a unified point of view of exploring the quantum control landscapes. For the feedback control approach, the paper surveys three control strategies including Lyapunov control, measurement-based control, and coherent-feedback control. Then such topics in the field of quantum robust control as H∞ control, sliding mode control, quantum risk-sensitive control, and quantum ensemble control are reviewed. The paper concludes with a perspective of future research directions that are likely to attract more attention.

  12. Self Assistive Technology for Disabled People – Voice Controlled Wheel Chair and Home Automation System

    Directory of Open Access Journals (Sweden)

    R. Puviarasi

    2014-07-01

    Full Text Available This paper describes the design of an innovative and low cost self-assistive technology that is used to facilitate the control of a wheelchair and home appliances by using advanced voice commands of the disabled people. This proposed system will provide an alternative to the physically challenged people with quadriplegics who is permanently unable to move their limbs (but who is able to speak and hear and elderly people in controlling the motion of the wheelchair and home appliances using their voices to lead an independent, confident and enjoyable life. The performance of this microcontroller based and voice integrated design is evaluated in terms of accuracy and velocity in various environments. The results show that it could be part of an assistive technology for the disabled persons without any third person’s assistance.

  13. Estimation of Model Uncertainties in Closed-loop Systems

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Poulsen, Niels Kjølstad

    2008-01-01

    is a measure for the variation in the system seen through the feedback controller. It is shown that it is possible to isolate a certain number of parameters or uncertain blocks in the system exactly. This is obtained by modifying the feedback controller through the YJBK transfer function together with pre......This paper describe a method for estimation of parameters or uncertainties in closed-loop systems. The method is based on an application of the dual YJBK (after Youla, Jabr, Bongiorno and Kucera) parameterization of all systems stabilized by a given controller. The dual YJBK transfer function...

  14. Towards a robust phase locked loop tune feedback system

    CERN Document Server

    Jones, R; Luo, Y

    2005-01-01

    Attempts to introduce a reliable tune feedback loop at RHIC (BNL) [1] have been thwarted by two main problems, namely transition crossing and betatron coupling. The problem of transition crossing is a dynamic range problem, resulting from the increase in the revolution content of the observed signal as the bunch length becomes short and from the fast orbit changes that occur during transition. The dynamic range issue is being addressed by the development of a baseband tune measurement system [2] as part of the US LHC Accelerator Research Program (US-LARP). This paper will focus on the second problem, showing how a phase locked loop (PLL) tune measurement system can be used to continuously measure global betatron coupling, and in so doing allow for robust tune measurement and feedback in the presence of coupling.

  15. Chemical looping reactor system design double loop circulating fluidized bed (DLCFB)

    Energy Technology Data Exchange (ETDEWEB)

    Bischi, Aldo

    2012-05-15

    Chemical looping combustion (CLC) is continuously gaining more importance among the carbon capture and storage (CCS) technologies. It is an unmixed combustion process which takes place in two steps. An effective way to realize CLC is to use two interconnected fluidized beds and a metallic powder circulating among them, acting as oxygen carrier. The metallic powder oxidizes at high temperature in one of the two reactors, the air reactor (AR). It reacts in a highly exothermic reaction with the oxygen of the injected fluidising air. Afterwards the particles are sent to the other reactor where the fuel is injected, the fuel reactor (FR). There, they transport heat and oxygen necessary for the reaction with the injected fuel to take place. At high temperatures, the particle's oxygen reacts with the fuel producing Co2 and steam, and the particles are ready to start the loop again. The overall reaction, the sum of the enthalpy changes of the oxygen carrier oxidation and reduction reactions, is the same as for the conventional combustion. Two are the key features, which make CLC promising both for costs and capture efficiency. First, the high inherent irreversibility of the conventional combustion is avoided because the energy is utilized stepwise. Second, the Co2 is intrinsically separated within the process; so there is in principle no need either of extra carbon capture devices or of expensive air separation units to produce oxygen for oxy-combustion. A lot of effort is taking place worldwide on the development of new chemical looping oxygen carrier particles, reactor systems and processes. The current work is focused on the reactor system: a new design is presented, for the construction of an atmospheric 150kWth prototype working with gaseous fuel and possibly with inexpensive oxygen carriers derived from industrial by-products or natural minerals. It consists of two circulating fluidized beds capable to operate in fast fluidization regime; this will increase the

  16. System and method of designing models in a feedback loop

    Energy Technology Data Exchange (ETDEWEB)

    Gosink, Luke C.; Pulsipher, Trenton C.; Sego, Landon H.

    2017-02-14

    A method and system for designing models is disclosed. The method includes selecting a plurality of models for modeling a common event of interest. The method further includes aggregating the results of the models and analyzing each model compared to the aggregate result to obtain comparative information. The method also includes providing the information back to the plurality of models to design more accurate models through a feedback loop.

  17. Closed-loop adaptive optical system with a liquid mirror.

    Science.gov (United States)

    Vdovin, Gleb

    2009-02-15

    A deformable mirror based on internal reflection from an electrostatically deformable liquid-air interface is proposed and investigated. A differential equation describing the static behavior of such a mirror is analyzed and solved numerically. Stable closed-loop operation of an adaptive optical system with a liquid deformable mirror is demonstrated, including forming and the correction of low-order aberrations described by Zernike polynomials and the real-time correction of dynamically changing aberrations.

  18. Covariance in models of loop quantum gravity: Gowdy systems

    CERN Document Server

    Bojowald, Martin

    2015-01-01

    Recent results in the construction of anomaly-free models of loop quantum gravity have shown obstacles when local physical degrees of freedom are present. Here, a set of no-go properties is derived in polarized Gowdy models, raising the question whether these systems can be covariant beyond a background treatment. As a side product, it is shown that normal deformations in classical polarized Gowdy models can be Abelianized.

  19. Validation of Closed Loop Degaussing System for Double Hull Submarines

    OpenAIRE

    Demilier, Laurent; Cauffet, Gilles; Chadebec, Olivier; Coulomb, Jean-Louis; Rouve, Laure-Line

    2010-01-01

    International audience; This paper presents last DCNS development on Closed Loop Degaussing System dedicated to high performance electromagnetic silent warship. This paper focuses on an evolution of the CLDG algorithm for degaussed warship. Developed in cooperation with Grenoble Electrical Engineering Lab, this genuine method allows to determine the hull unknown magnetization components, thus the predicted signature, based on real time magnetic measurements from sensors located very close to ...

  20. Data Equivalency of an Interactive Voice Response System for Home Assessment of Back Pain and Function

    Directory of Open Access Journals (Sweden)

    William S Shaw

    2007-01-01

    Full Text Available BACKGROUND: Interactive voice response (IVR systems that collect survey data using automated, push-button telephone responses may be useful to monitor patients’ pain and function at home; however, its equivalency to other data collection methods has not been studied.

  1. The role of the medial temporal limbic system in processing emotions in voice and music.

    Science.gov (United States)

    Frühholz, Sascha; Trost, Wiebke; Grandjean, Didier

    2014-12-01

    Subcortical brain structures of the limbic system, such as the amygdala, are thought to decode the emotional value of sensory information. Recent neuroimaging studies, as well as lesion studies in patients, have shown that the amygdala is sensitive to emotions in voice and music. Similarly, the hippocampus, another part of the temporal limbic system (TLS), is responsive to vocal and musical emotions, but its specific roles in emotional processing from music and especially from voices have been largely neglected. Here we review recent research on vocal and musical emotions, and outline commonalities and differences in the neural processing of emotions in the TLS in terms of emotional valence, emotional intensity and arousal, as well as in terms of acoustic and structural features of voices and music. We summarize the findings in a neural framework including several subcortical and cortical functional pathways between the auditory system and the TLS. This framework proposes that some vocal expressions might already receive a fast emotional evaluation via a subcortical pathway to the amygdala, whereas cortical pathways to the TLS are thought to be equally used for vocal and musical emotions. While the amygdala might be specifically involved in a coarse decoding of the emotional value of voices and music, the hippocampus might process more complex vocal and musical emotions, and might have an important role especially for the decoding of musical emotions by providing memory-based and contextual associations.

  2. EasyVoice: Integrating voice synthesis with Skype

    CERN Document Server

    Condado, Paulo A

    2007-01-01

    This paper presents EasyVoice, a system that integrates voice synthesis with Skype. EasyVoice allows a person with voice disabilities to talk with another person located anywhere in the world, removing an important obstacle that affect these people during a phone or VoIP-based conversation.

  3. Environmental impacts of open loop geothermal system on groundwater

    Science.gov (United States)

    Kwon, Koo-Sang; Park, Youngyun; Yun, Sang Woong; Lee, Jin-Yong

    2013-04-01

    Application of renewable energies such as sunlight, wind, rain, tides, waves and geothermal heat has gradually increased to reduce emission of CO2 which is supplied from combustion of fossil fuel. The geothermal energy of various renewable energies has benefit to be used to cooling and heating systems and has good energy efficiency compared with other renewable energies. However, open loop system of geothermal heat pump system has possibility that various environmental problems are induced because the system directly uses groundwater to exchange heat. This study was performed to collect data from many documents such as papers and reports and to summarize environmental impacts for application of open loop system. The environmental impacts are classified into change of hydrogeological factors such as water temperature, redox condition, EC, change of microbial species, well contamination and depletion of groundwater. The change of hydrogeological factors can induce new geological processes such as dissolution and precipitation of some minerals. For examples, increase of water temperature can change pH and Eh. These variations can change saturation index of some minerals. Therefore, dissolution and precipitation of some minerals such as quartz and carbonate species and compounds including Fe and Mn can induce a collapse and a clogging of well. The well contamination and depletion of groundwater can reduce available groundwater resources. These environmental impacts will be different in each region because hydrogeological properties and scale, operation period and kind of the system. Therefore, appropriate responses will be considered for each environmental impact. Also, sufficient study will be conducted to reduce the environmental impacts and to improve geothermal energy efficiency during the period that a open loop system is operated. This work was supported by the Energy Efficiency and Resources of the Korea Institute of Energy Technology Evaluation and Planning

  4. Chemical looping reactor system design double loop circulating fluidized bed (DLCFB)

    Energy Technology Data Exchange (ETDEWEB)

    Bischi, Aldo

    2012-05-15

    Chemical looping combustion (CLC) is continuously gaining more importance among the carbon capture and storage (CCS) technologies. It is an unmixed combustion process which takes place in two steps. An effective way to realize CLC is to use two interconnected fluidized beds and a metallic powder circulating among them, acting as oxygen carrier. The metallic powder oxidizes at high temperature in one of the two reactors, the air reactor (AR). It reacts in a highly exothermic reaction with the oxygen of the injected fluidising air. Afterwards the particles are sent to the other reactor where the fuel is injected, the fuel reactor (FR). There, they transport heat and oxygen necessary for the reaction with the injected fuel to take place. At high temperatures, the particle's oxygen reacts with the fuel producing Co2 and steam, and the particles are ready to start the loop again. The overall reaction, the sum of the enthalpy changes of the oxygen carrier oxidation and reduction reactions, is the same as for the conventional combustion. Two are the key features, which make CLC promising both for costs and capture efficiency. First, the high inherent irreversibility of the conventional combustion is avoided because the energy is utilized stepwise. Second, the Co2 is intrinsically separated within the process; so there is in principle no need either of extra carbon capture devices or of expensive air separation units to produce oxygen for oxy-combustion. A lot of effort is taking place worldwide on the development of new chemical looping oxygen carrier particles, reactor systems and processes. The current work is focused on the reactor system: a new design is presented, for the construction of an atmospheric 150kWth prototype working with gaseous fuel and possibly with inexpensive oxygen carriers derived from industrial by-products or natural minerals. It consists of two circulating fluidized beds capable to operate in fast fluidization regime; this will increase the

  5. Stability Analysis of Closed-loop Water System

    Institute of Scientific and Technical Information of China (English)

    Yongzheng FU; Keqi WU; Yaqiao CAI

    2006-01-01

    Aiming at closed-loop water system, by the method that shutting certain subcircuit, and solving the piping network, computing flow deviation of other subcircuits, then analyzing the rules of variation of stability with various factors, following conclusions are obtained: When reducing the resistance in main pipes, increasing resistance of subcircuits, system stability can be improved. Centralized regulation by changing power has no influence on system stability; centralized regulation by changing resistances will decrease system stability. Pump characteristics curve influences system stability, stability of the flat characteristic is superior to the steep one. For direct return system (DRS), the stability of subcircuit which is farthest from the heat source is the worst. For reverse return system (RRS), the stability of subcircuit in the middle of the pipe-network has the worst stability.Overall, stability of RRS is inferior to that of DRS.

  6. Parallelization of While Loops in Nested Loop Programs for Shared-Memory Multiprocessor Systems

    NARCIS (Netherlands)

    Geuns, Stefan J.; Bekooij, Marco J.G.; Bijlsma, Tjerk; Corporaal, Henk

    2011-01-01

    Many applications contain loops with an undetermined number of iterations. These loops have to be parallelized in order to increase the throughput when executed on an embedded multiprocessor platform. This paper presents a method to automatically extract a parallel task graph based on function level

  7. Integrated Evaluation of Closed Loop Air Revitalization System Components

    Science.gov (United States)

    Murdock, K.

    2010-01-01

    NASA s vision and mission statements include an emphasis on human exploration of space, which requires environmental control and life support technologies. This Contractor Report (CR) describes the development and evaluation of an Air Revitalization System, modeling and simulation of the components, and integrated hardware testing with the goal of better understanding the inherent capabilities and limitations of this closed loop system. Major components integrated and tested included a 4-Bed Modular Sieve, Mechanical Compressor Engineering Development Unit, Temperature Swing Adsorption Compressor, and a Sabatier Engineering and Development Unit. The requisite methodolgy and technical results are contained in this CR.

  8. Integrable systems twistors, loop groups, and Riemann surfaces

    CERN Document Server

    Hitchin, NJ; Ward, RS

    2013-01-01

    This textbook is designed to give graduate students an understanding of integrable systems via the study of Riemann surfaces, loop groups, and twistors. The book has its origins in a series of lecture courses given by the authors, all of whom are internationally known mathematicians and renowned expositors. It is written in an accessible and informal style, and fills a gap in the existing literature. The introduction by Nigel Hitchin addresses the meaning of integrability: how do werecognize an integrable system? His own contribution then develops connections with algebraic geometry, and inclu

  9. A Prototype System for Controlling a Computer by Head Movements and Voice Commands

    CERN Document Server

    Ismail, Anis; Hajjar, Mohammad

    2011-01-01

    This paper introduces a new prototype system for controlling a PC by head movements and also with voice commands. Our system is a multimodal interface concerned with controlling the computer. The selected modes of interaction are speech and gestures. We are seeing the revolutionary of computers and information technologies into daily practice. Healthy people use keyboard, mouse, trackball, or touchpad for controlling the PC. However these peripheries are usually not suitable for handicapped people. They may have problems using these standard peripheries, for example when they suffer from myopathy, or cannot move their hands after an injury. Our system has been developed to provide computer access for people with severe disabilities. This system tracks the computer user's Head movements with a video camera and translates them into the movements of the mouse pointer on the screen and the voice as button presses. Therefore we are coming with a proposal system that can be used with handicapped people to control t...

  10. Hypnosis closed loop TCI systems in outpatient surgery.

    Science.gov (United States)

    Ramos-Luengo, A; Asensio-Merino, F

    Determine the influence of general anaesthesia with closed-loop systems in the results of outpatient varicose vein surgery. Retrospective observational study including data from 270 outpatients between 2014 and 2015. The patients were divided into 2 groups according to the type of general anaesthesia used. The CL Group included patients who received propofol in closed-loop guided by BIS and remifentanil using TCI, and the C Group received non-closed-loop anaesthesia. Age, sex, surgical time, discharge time and failure of outpatient surgery were recorded. Quantitative data were checked for normal distribution by the method of Kolmogorov-Smirnov-Lilliefors. Differences between groups were analysed by a Student-t-test or Mann-Whitney-Wilcoxon test, depending on their distribution. Categorical data were analysed by a Chi-squared test. We used Kaplan-Meier estimator and the effect size (calculated by Cohen's d) to study the discharge time. Statistical analysis was performed using R 3.2.3 binary for Mac OS X 10.9. There were no significant differences in age, sex and surgical time and failure of outpatient surgery. Discharge time was different in both groups: 200 (100) vs. 180 (82.5) minutes, C Group and CL Group, respectively (data are median and interquartile rank); P=.005. The use of closed-loop devices for the hypnotic component of anaesthesia hastens discharge time. However, for this effect to be clinically significant, some improvements still need to be made in our outpatient surgery units. Copyright © 2016 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Publicado por Elsevier España, S.L.U. All rights reserved.

  11. Semantic Model for Voice Controlled Telephone Dialing and Inquiry Systems

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new scheme is presented to detect a large number of keywords in voice controlled switchboard tasks. The new scheme is based on two stages. In the first stage, N-best syllable candidates with their corresponding acoustic scores are generated by an acoustic recognizer. In the second stage, a semantic model based parser is applied to determine the optimum keywords by searching through the lattice of N-best candidates. The experimental results show that when the spoken input deviates from the predefined syntactic constraints, the parser can also demonstrate high performance. For comparison purposes, the most common way to incorporate the syntactic knowledge of the task directly into the acoustic recognizer in the form of a finite state network is also investigated. Furthermore, to address the sparse-data problems, out-of-domain data in the form of newspaper text are used to obtain a more robust combined semantic model. The experiments show that the combined semantic model can improve the keywords detection rate from 90.07% to 92.91% when 80 ungrammatical sentences which do not conform to the task grammar are used as testing material.

  12. ON THE NUMBER OF LIMIT CYCLES OF A CUBIC SYSTEM NEAR A CUSPIDAL LOOP

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this paper, we investigate the limit cycle bifurcations in a cubic near-Hamiltonian system by perturbing a cuspidal loop and prove that 5 limit cycles can appear in a neighborhood of the cuspidal loop.

  13. VOICE ACTIVATED MULTIPROCESSOR EMBEDDED SYSTEM TO IMPROVE THE CONTROL OF A MOTORIZED WHEELCHAIR

    Directory of Open Access Journals (Sweden)

    SANGMESHWAR S. KENDRE,

    2010-11-01

    Full Text Available The main idea of this work is to process analog voice signal. The theme is implemented for controlling the wheelchair by voice through speech processing using Hawkboard (OMAP processor. The adopted model is based on grouping a ARM and a DSP processor for speech enhancement with a voice recognition module for isolated word and speaker dependent. The Texas Instruments OMAP-L138 is integrated in order to enhance the quality of speech signal by reducing noise and connected with the wheelchair for processing of the voice signal. The Hawkboard denoises speech signal and HMC2007 recognizes the commnads. It also generates different desired signals according to the spoken words which further used to control the movement of wheelchair, a vector of information on the context given by a set of sensors for security actions. Six words are recognized which are start, forward, reverse, left, right, stop. In order to gain in time design, experiments have shown that the best way is to choose a speech recognition kit and to adapt it to the application. The result at the end show the efficiency of the system.

  14. The Study of Application System for Small and Medium CTI Based on Voice Card

    Directory of Open Access Journals (Sweden)

    Zhong Dong

    2016-01-01

    Full Text Available With the rapid development of computer telecommunications integration (CTI technology, the development of application system for small and medium CTI are updated constantly, but the study of application system for small and medium CTI, we are lack of a stability and unified model. In this paper, the author analyzes the unified structure platform of application system for small and medium CTI based on voice card. Meanwhile, the author introduces a suitable software architecture model and general procedural framework for application system for small and medium CTI based on voice card by using the idea of hierarchical design, which shows the versatility of the architecture. It provided an efficient channel for the development of small and medium CTI.

  15. On the Passivity of Hysteretic Systems with Double Hysteretic Loops

    Directory of Open Access Journals (Sweden)

    Francesc Pozo

    2015-12-01

    Full Text Available The Bouc–Wen hysteresis model is widely employed to mathematically represent the dynamical behavior of several physical devices, materials and systems such as magnetorheological dampers, lanthanide zirconium or aluminum oxides, mechanical structures or biomedical systems. However, these mathematical models must account for different properties such as the bounded-input bounded-output stability, asymptotic motion, thermodynamic admissibility or passivity in order to be physically consistent with the systems they represent. The passivity of a system is related to energy dissipation. More precisely, a system is passive if it does not generate energy but only dissipates it. The objective of this paper is to prove that two different double-loop Bouc–Wen models are passive under a particular set of model parameters.

  16. One-loop renormalization of a gravity-scalar system

    Energy Technology Data Exchange (ETDEWEB)

    Park, I.Y. [Philander Smith College, Department of Applied Mathematics, Little Rock, AR (United States)

    2017-05-15

    Extending the renormalizability proposal of the physical sector of 4D Einstein gravity, we have recently proposed renormalizability of the 3D physical sector of gravity-matter systems. The main goal of the present work is to conduct systematic one-loop renormalization of a gravity-matter system by applying our foliation-based quantization scheme. In this work we explicitly carry out renormalization of a gravity-scalar system with a Higgs-type potential. With the fluctuation part of the scalar field gauged away, the system becomes renormalizable through a metric field redefinition. We use dimensional regularization throughout. One of the salient aspects of our analysis is how the graviton propagator acquires the ''mass'' term. One-loop calculations lead to renormalization of the cosmological and Newton constants. We discuss other implications of our results as well: time-varying vacuum energy density and masses of the elementary particles as well as the potential relevance of Neumann boundary condition for black hole information. (orig.)

  17. Observing the reconnection region in a transequatorial loop system

    Institute of Scientific and Technical Information of China (English)

    Rui Liu; Tong-Jiang Wang; Jeongwoo Lee; Guillermo Stenborg; Chang Liu; Sung-Hong Park; Hai-Min Wang

    2011-01-01

    A vertical current sheet is a crucial element in many flare/coronal mass ejection (CME) models.For the first time,Liu et al.reported a vertical current sheet directly imaged during the flare rising phase with the EUV Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory (SOHO).As a follow-up study,here we present the comprehensive analysis and detailed physical interpretation of the observation.The current sheet formed due to the gradual rise of a transequatorial loop system.As the loop legs approached each other,plasma flew at ~6 km s-1 into a local area where a cusp-shaped flare loop subsequently formed and the current sheet was seen as a bright,collimated structure of global length (≥ 0.25 R(@)) and macroscopic width ((5-10)× 103 km),extending from 50 Mm above the flaring loop to the border of the EIT field of view (FOV).The reconnection rate in terms of the Alfvén Mach number is estimated to be only 0.005-0.009,albeit a halo CME was accelerated from ~ 400 km s- 1 to ~ 1300 km s- 1 within the coronagraph FOV.Drifting pulsating structures at metric frequencies were recorded during the impulsive phase,implying tearing of the current sheet in the high corona.A radio Type Ⅲ burst occurred when the current sheet was clearly seen in EUV,indicative of accelerated electrons beaming upward from the upper tip of the current sheet.A cusp-shaped dimming region was observed to be located above the post-flare arcade during the decay phase in EIT;both the arcade and the dimming expanded with time.With the Coronal Diagnostic Spectrometer (CDS) aboard SOHO,a clear signature of chromospheric evaporation was seen during the decay phase,i.e.,the cusp-shaped dimming region was associated with plasma upflows detected with EUV hot emission lines,while the post-flare loop was associated with downflows detected with cold lines.This event provides a comprehensive view of the reconnection geometry and dynamics in the solar corona.

  18. Effects of emotional and perceptual-motor stress on a voice recognition system's accuracy: An applied investigation

    Science.gov (United States)

    Poock, G. K.; Martin, B. J.

    1984-02-01

    This was an applied investigation examining the ability of a speech recognition system to recognize speakers' inputs when the speakers were under different stress levels. Subjects were asked to speak to a voice recognition system under three conditions: (1) normal office environment, (2) emotional stress, and (3) perceptual-motor stress. Results indicate a definite relationship between voice recognition system performance and the type of low stress reference patterns used to achieve recognition.

  19. Hands-free speech after surgical voice rehabilitation with a Provox voice prosthesis: experience with the Provox FreeHands HME tracheostoma valve system.

    Science.gov (United States)

    Lorenz, K J; Groll, K; Ackerstaff, A H; Hilgers, F J M; Maier, H

    2007-02-01

    Excellent results have been reported with the use of voice prostheses for the rehabilitation of laryngectomees. Patients, however, consider it a disadvantage that the tracheostoma must be closed manually for speech production. This limits their ability to simultaneously communicate by gesture or to work with both hands. An automatic tracheostoma valve helps patients overcome this problem. We describe a prospective clinical trial evaluating our experience with the Provox FreeHands HME Automatic Tracheostoma Valve system. Twenty-four laryngectomees were randomly selected from the patients who had undergone laryngectomy at the ENT Department. Immediately, after 4 weeks and 6 months later having been fitted with a Provox FreeHands HME, the patients were asked to complete a questionnaire in order to assess their satisfaction, voice quality, wearing comfort, fixation, potential problems, and the effectiveness of the HME cassette. In addition, we investigated relevant voice quality parameters including dynamics range, frequency range of the speaking voice, and maximum phonation time. Seven patients discontinued the study due to problems of securing the valve to the skin (four patients) or recurrent cancer (three patients). Ten of the remaining 17 patients wore the valve daily for an average of 8.4 h. A total of 88% of the patients considered it a great advantage to be able to speak without having to use their hands. With the Provox FreeHands HME, maximum phonation time was 8.7 (+/-6.2) s and the dynamic range was 21.9 (+/-5.8) decibels. The results show that the Provox FreeHands HME Automatic Tracheostoma Valve system not only allows hands-free speech but is also associated with excellent compliance and good voice rehabilitation.

  20. A two-loop excitation control system for synchronous generators

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez-Ramirez, Jose; Cervantes, Ilse; Escarela-Perez, Rafael; Espinosa-Perez, Gerardo [Seccion de Estudios de Posgrado e Investigacion ESIME-C, Av. Santa Ana 1000 Col. San Francisco Culhuacan, Mexico D.F. 04430 (Mexico)

    2005-10-01

    An excitation controller for a single generator based on modern multi-loop design methodology is presented in this paper. The proposed controller consists of two-loops: a stabilizing (damping injection) loop and a voltage regulating loop. The task of the stabilizing loop is to add damping in the face of voltage oscillations. The voltage regulating loop is basically a PI compensator whose objective is to obtain terminal voltage regulation about the prescribed reference. The main contribution of this paper is to give some insights into the systematic derivation of multi-loop controllers of power generators. Certain connections between the two-loop excitation controller and standard PSS-AVR schemes are discussed. In this way, some insight into the stability of the standard PSS scheme is obtained from the analysis of the proposed controller. The proposed controller is evaluated via numerical simulations on a full finite-element model. (author)

  1. Improvement of the cascading closed loop cycle system

    Institute of Scientific and Technical Information of China (English)

    ZHANG Guoqiang; CAI Ruixian

    2007-01-01

    Aspen Plus was used to simulate and get more information about the cascading closed loop cycle (CCLC)system [1-3].Following evaluation of the variable temperature heat source (e.g.gas turbine flue gas) utilized by the CCLC,both qualitative and quantitive comparisons between the system and simple steam Rankine cycle,were made.The results indicate that CCLC has the advantage in recuperating exergy from flue gas,but it cannot sufficiently convert the recuperated exergy to useful work.To improve the utilization of low temperature flue gas heat,the properties and parameters of the working substance must match conditions of the low temperature heat source.A better cycle scheme and pressure distribution was proposed to raise the efficiency of the CCLC.In addition,the multifunction system concept was introduced to improve the performance of CCLC with solar energy.

  2. Hardware-in-the-loop grid simulator system and method

    Science.gov (United States)

    Fox, John Curtiss; Collins, Edward Randolph; Rigas, Nikolaos

    2017-05-16

    A hardware-in-the-loop (HIL) electrical grid simulation system and method that combines a reactive divider with a variable frequency converter to better mimic and control expected and unexpected parameters in an electrical grid. The invention provides grid simulation in a manner to allow improved testing of variable power generators, such as wind turbines, and their operation once interconnected with an electrical grid in multiple countries. The system further comprises an improved variable fault reactance (reactive divider) capable of providing a variable fault reactance power output to control a voltage profile, therein creating an arbitrary recovery voltage. The system further comprises an improved isolation transformer designed to isolate zero-sequence current from either a primary or secondary winding in a transformer or pass the zero-sequence current from a primary to a secondary winding.

  3. Utilization of Internet Protocol-Based Voice Systems in Remote Payload Operations

    Science.gov (United States)

    Chamberlain, jim; Bradford, Bob; Best, Susan; Nichols, Kelvin

    2002-01-01

    Due to limited crew availability to support science and the large number of experiments to be operated simultaneously, telescience is key to a successful International Space Station (ISS) science program. Crew, operations personnel at NASA centers, and researchers at universities and companies around the world must work closely together to per orm scientific experiments on-board ISS. The deployment of reliable high-speed Internet Protocol (IP)-based networks promises to greatly enhance telescience capabilities. These networks are now being used to cost-effectively extend the reach of remote mission support systems. They reduce the need for dedicated leased lines and travel while improving distributed workgroup collaboration capabilities. NASA has initiated use of Voice over Internet Protocol (VoIP) to supplement the existing mission voice communications system used by researchers at their remote sites. The Internet Voice Distribution System (IVoDS) connects remote researchers to mission support "loopsll or conferences via NASA networks and Internet 2. Researchers use NODS software on personal computers to talk with operations personnel at NASA centers. IVoDS also has the ;capability, if authorized, to allow researchers to communicate with the ISS crew during experiment operations. NODS was developed by Marshall Space Flight Center with contractors & Technology, First Virtual Communications, Lockheed-Martin, and VoIP Group. NODS is currently undergoing field-testing with full deployment for up to 50 simultaneous users expected in 2002. Research is being performed in parallel with IVoDS deployment for a next-generation system to qualitatively enhance communications among ISS operations personnel. In addition to the current voice capability, video and data/application-sharing capabilities are being investigated. IVoDS technology is also being considered for mission support systems for programs such as Space Launch Initiative and Homeland Defense.

  4. A translational platform for prototyping closed-loop neuromodulation systems

    Directory of Open Access Journals (Sweden)

    Pedram eAfshar

    2013-01-01

    Full Text Available While modulating neural activity through stimulation is an effective treatment for neurological diseases such as Parkinson’s disease and essential tremor, an opportunity for improving neuromodulation therapy remains in automatically adjusting therapy to continuously optimize patient outcomes. Practical issues associated with achieving this include the paucity of human data related to disease states, poorly validated estimators of patient state, and unknown dynamic mappings of optimal stimulation parameters based on estimated states. To overcome these challenges, we present an investigational platform including: an implanted sensing and stimulation device to collect data and run automated closed-loop algorithms; an external tool to prototype classifier and control-policy algorithms; and real-time telemetry to update the implanted device firmware and monitor its state. The prototyping system was demonstrated in a chronic large animal model studying hippocampal dynamics. We used the platform to find biomarkers of the observed states and transfer functions of different stimulation amplitudes. Data showed that moderate levels of stimulation suppress hippocampal beta activity, while high levels of stimulation produce seizure-like after-discharge activity. The biomarker and transfer function observations were mapped into classifier and control-policy algorithms, which were downloaded to the implanted device to continuously titrate stimulation amplitude for the desired network effect. The platform is designed to be a flexible prototyping tool and could be used to develop improved mechanistic models and automated closed-loop systems for a variety of neurological disorders.

  5. Load System of Segmental T-Loops for Canine Retraction

    Science.gov (United States)

    Xia, Zeyang; Chen, Jie; Jiang, Feifei; Li, Shuning; Viecilli, Rodrigo F; Liu, Sean Y.

    2013-01-01

    Objectives The orthodontic load system, especially the ideal moment-to-force ratios (M/F), is the commonly used design parameter of segmental T-loops for canine retraction. However, the load system, including M/F, may be affected by the changes in canine angulations and interbracket distance (IBD). Here, we hypothesize that clinical changes in canine position and angulation during canine retraction will significantly affect the load system delivered to the tooth. Methods The load systems of two T-loop groups, one for translation (TR) and the other for controlled tipping (CT), from nine bilateral canine retraction patients were made to the targeted values obtained from finite element analyses and validated. Each loop was tested on the corresponding maxillary dental cast obtained in the clinic. The casts were made before and after each treatment interval so that both initial and residual load systems could be obtained. The pre- and post-treatment IBDs were recorded for calculating IBD changes. Results As the IBDs decreased, the averaged retraction-force-drop per IBD reduction was 36 cN/mm, a 30% drop per 1 mm IBD decrease. The averaged anti-tipping-moment-drops per IBD reductions were 0.02 N-mm/mm for CT and 1.4 N-mm/mm for TR, ~0.6 % and 17% drop per 1 mm IBD decrease, respectively. Consequently, the average M/F increases per 1 mm IBD reduction were 1.24 mm/mm for CT and 6.34 mm/mm for TR. There was significant residual load left, which could continue to move the tooth if the patient missed the scheduled appointment. Conclusions Clinical changes in canine position and angulation during canine retraction significantly affect the load system. The initial planned M/F needs to be lower to reach the expected average ideal value. Patients should be required to follow the office visit schedule closely to avoid negative effects due to significant M/F increases with time. PMID:24075663

  6. Design of Protection System for High Temperature and High Pressure Test Loop

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Ming-kui; XU; Qi-guo; JIA; Yu-wen

    2012-01-01

    <正>High temperature and high pressure test loop is a research platform of China Advanced Research Reactor (CARR). Dedicated protection system is designed for safety of test loop and the reactor. Postulated initiating event related to test loop operation is analyzed, thereafter, protection variables are determined. 3 independent redundant measure channels are designed for each protection variable

  7. Phase-locked loops. [in analog and digital circuits communication system

    Science.gov (United States)

    Gupta, S. C.

    1975-01-01

    An attempt to systematically outline the work done in the area of phase-locked loops which are now used in modern communication system design is presented. The analog phase-locked loops are well documented in several books but discrete, analog-digital, and digital phase-locked loop work is scattered. Apart from discussing the various analysis, design, and application aspects of phase-locked loops, a number of references are given in the bibliography.

  8. A LabVIEW model incorporating an open-loop arterial impedance and a closed-loop circulatory system.

    Science.gov (United States)

    Cole, R T; Lucas, C L; Cascio, W E; Johnson, T A

    2005-11-01

    While numerous computer models exist for the circulatory system, many are limited in scope, contain unwanted features or incorporate complex components specific to unique experimental situations. Our purpose was to develop a basic, yet multifaceted, computer model of the left heart and systemic circulation in LabVIEW having universal appeal without sacrificing crucial physiologic features. The program we developed employs Windkessel-type impedance models in several open-loop configurations and a closed-loop model coupling a lumped impedance and ventricular pressure source. The open-loop impedance models demonstrate afterload effects on arbitrary aortic pressure/flow inputs. The closed-loop model catalogs the major circulatory waveforms with changes in afterload, preload, and left heart properties. Our model provides an avenue for expanding the use of the ventricular equations through closed-loop coupling that includes a basic coronary circuit. Tested values used for the afterload components and the effects of afterload parameter changes on various waveforms are consistent with published data. We conclude that this model offers the ability to alter several circulatory factors and digitally catalog the most salient features of the pressure/flow waveforms employing a user-friendly platform. These features make the model a useful instructional tool for students as well as a simple experimental tool for cardiovascular research.

  9. The hearing voices network: initial lessons and future directions for mental health professionals and Systems of Care.

    Science.gov (United States)

    Styron, Thomas; Utter, Lauren; Davidson, Larry

    2017-02-01

    For more than two decades, the Hearing Voices Network (HVN) has provided alternative approaches to supporting voice hearers, and an emerging body of research is now confirming their value. HVN approaches present unique opportunities and challenges for mental health professionals and systems of care that work with individuals who hear voices. An overview of the HVN is presented, including its history, principles and approaches. HVN approaches are compared and contrasted with traditional mental health treatments. HVN's potential contribution to the transformation of mental health care is discussed. Directions for future research are presented.

  10. 75 FR 30845 - Request Voucher for Grant Payment and Line of Credit Control System (LOCCS) Voice Response System...

    Science.gov (United States)

    2010-06-02

    ... URBAN DEVELOPMENT Request Voucher for Grant Payment and Line of Credit Control System (LOCCS) Voice... is soliciting public comments on the subject proposal. Payment request vouchers for distribution of.... This Notice Also Lists the Following Information Title of Proposal: Request Voucher for Grant...

  11. IDENTIFICATION OF BOTH CLOSED- AND OPEN-LOOP STOCHASTIC SYSTEM WHILE STABILIZING IT

    Institute of Scientific and Technical Information of China (English)

    CHEN Hanfu (Han-Fu Chen)

    2002-01-01

    This paper proposes a recursive algorithm estimating coefficients of thc linear stochastic control system (ARX system) driven by a martingale difference sequence, while adaptively stabilizing the system without introducing external excitation signal. The system is allowed to be unstable and of nonminimum-phase. The estimates derived for the coefficients of both closed-loop and open-loop systems are strongly consistent.

  12. AN IMPROVED ALGORITHM OF GMM VOICE CONVERSION SYSTEM BASED ON CHANGING THE TIME-SCALE

    Institute of Scientific and Technical Information of China (English)

    Zhou Ying; Zhang Linghua

    2011-01-01

    This paper improves and presents an advanced method of the voice conversion system based on Gaussian Mixture Models (GMM) models by changing the time-scale of speech.The Speech Transformation and Representation using Adaptive Interpolation of weiGHTed spectrum (STRAIGHT) model is adopted to extract the spectrum features,and the GMM models are trained to generate the conversion function.The spectrum features of a source speech will be converted by the conversion function.The time-scale of speech is changed by extracting the converted features and adding to the spectrum.The conversion voice was evaluated by subjective and objective measurements.The results confirm that the transformed speech not only approximates the characteristics of the target speaker,but also more natural and more intelligible.

  13. Parameterless-Growing-SOM and Its Application to a Voice Instruction Learning System

    Directory of Open Access Journals (Sweden)

    Takashi Kuremoto

    2010-01-01

    Full Text Available An improved self-organizing map (SOM, parameterless-growing-SOM (PL-G-SOM, is proposed in this paper. To overcome problems existed in traditional SOM (Kohonen, 1982, kinds of structure-growing-SOMs or parameter-adjusting-SOMs have been invented and usually separately. Here, we combine the idea of growing SOMs (Bauer and Villmann, 1997; Dittenbach et al. 2000 and a parameterless SOM (Berglund and Sitte, 2006 together to be a novel SOM named PL-G-SOM to realize additional learning, optimal neighborhood preservation, and automatic tuning of parameters. The improved SOM is applied to construct a voice instruction learning system for partner robots adopting a simple reinforcement learning algorithm. User's instructions of voices are classified by the PL-G-SOM at first, then robots choose an expected action according to a stochastic policy. The policy is adjusted by the reward/punishment given by the user of the robot. A feeling map is also designed to express learning degrees of voice instructions. Learning and additional learning experiments used instructions in multiple languages including Japanese, English, Chinese, and Malaysian confirmed the effectiveness of our proposed system.

  14. Automating the weaning process with advanced closed-loop systems.

    Science.gov (United States)

    Burns, Karen E A; Lellouche, Francois; Lessard, Martin R

    2008-10-01

    Limiting the duration of invasive ventilation is an important goal in caring for critically ill patients. Several clinical trials have shown that compared to traditional care, protocols can reduce the total duration of mechanical ventilation. Computerized or automated weaning has the potential to improve weaning, while decreasing associated workload, and to transfer best evidence into clinical practice by integrating closed-loop technology into protocols that can be operationalized continuously. In this article, we review the principles of automated systems, discuss automated systems that can be used during weaning, and examine the best-current evidence from randomized trials and observational studies supporting their use. We highlight three commercially available systems (Mandatory Minute Ventilation, Adaptive Support Ventilation and SmartCare) that can be used to automate the weaning process. We note advantages and disadvantages associated with individual weaning systems and differences among them. We discuss the potential role for automation in complimenting clinical acumen, reducing practice pattern variation and facilitating knowledge translation into clinical practice, and underscore the need for additional high quality investigations to evaluate automated weaning systems in different practice settings and diverse patient populations.

  15. Transient activity in the loop prominence system of a flare active region

    Science.gov (United States)

    Bagare, S. P.; Nagabhushana, B. S.; Aleem, P. S. M.

    1989-09-01

    Solar limb observations of the activity in a loop prominence system associated with an active region were obtained on February 2, 1984. The activity was observed for a total duration of over seven hours of which the maximum phase lasted for about an hour. From a series of Ca II K prominence spectroheliograms taken during this phase, the individual loops appear to experience a sequence of activity; the brightening of kernel, brightening of portions of the loop, motion of the enhanced brightenings along the legs of the loop and a diffuse appearance of the loop at the end phase. The details of these phenomena and other associated activity are described.

  16. Downlink Training Techniques for FDD Massive MIMO Systems: Open-Loop and Closed-Loop Training With Memory

    Science.gov (United States)

    Choi, Junil; Love, David J.; Bidigare, Patrick

    2014-10-01

    The concept of deploying a large number of antennas at the base station, often called massive multiple-input multiple-output (MIMO), has drawn considerable interest because of its potential ability to revolutionize current wireless communication systems. Most literature on massive MIMO systems assumes time division duplexing (TDD), although frequency division duplexing (FDD) dominates current cellular systems. Due to the large number of transmit antennas at the base station, currently standardized approaches would require a large percentage of the precious downlink and uplink resources in FDD massive MIMO be used for training signal transmissions and channel state information (CSI) feedback. To reduce the overhead of the downlink training phase, we propose practical open-loop and closed-loop training frameworks in this paper. We assume the base station and the user share a common set of training signals in advance. In open-loop training, the base station transmits training signals in a round-robin manner, and the user successively estimates the current channel using long-term channel statistics such as temporal and spatial correlations and previous channel estimates. In closed-loop training, the user feeds back the best training signal to be sent in the future based on channel prediction and the previously received training signals. With a small amount of feedback from the user to the base station, closed-loop training offers better performance in the data communication phase, especially when the signal-to-noise ratio is low, the number of transmit antennas is large, or prior channel estimates are not accurate at the beginning of the communication setup, all of which would be mostly beneficial for massive MIMO systems.

  17. Smart Homes with Voice Activated Systems for Disabled People

    National Research Council Canada - National Science Library

    Bekir Busatlic; Nejdet Dogru; Isaac Lera; Enes Sukic

    2017-01-01

    Smart home refers to the application of various technologies to semi-unsupervised home control It refers to systems that control temperature, lighting, door locks, windows and many other appliances...

  18. The Bellevue Classification System: nursing's voice upon the library shelves.

    Science.gov (United States)

    Mages, Keith C

    2011-01-01

    This article examines the inspiration, construction, and meaning of the Bellevue Classification System (BCS), created during the 1930s for use in the Bellevue School of Nursing Library. Nursing instructor Ann Doyle, with assistance from librarian Mary Casamajor, designed the BCS after consulting with library leaders and examining leading contemporary classification systems, including the Dewey Decimal Classification and Library of Congress, Ballard, and National Health Library classification systems. A close textual reading of the classes, subclasses, and subdivisions of these classification systems against those of the resulting BCS, reveals Doyle's belief that the BCS was created not only to organize the literature, but also to promote the burgeoning intellectualism and professionalism of early twentieth-century American nursing.

  19. Feedback loops from the Hubble Space Telescope data processing system

    Science.gov (United States)

    Fraquelli, Dorothy A.; Arquilla, Richard; Ellis, Tracy; Hamilton, Forrest C.; Holm, Albert; Kochte, Mark

    2002-12-01

    This paper presents an overview of the history and technology by which tools placed in the Hubble Space Telescope (HST) data processing pipeline were used to feedback information on observation execution to the scheduling system and observers. Because the HST is in a relatively low orbit, which imposes a number of constraints upon its observations, it operates in a carefully planned, fully automated mode. To substitute for direct observer involvement available at most ground-based observatories and to provide rapid feedback on failures that might affect future visits, the Space Telescope Science Institute (STScI) gradually evolved a system for screening science and engineering products during pipeline processing. The highly flexible HST data processing system (OPUS) allows tools to be introduced to use the content of FITS keywords to alert production staff to potential telescope and instrument performance failures. Staff members review the flagged data and, if appropriate, notify the observer and the scheduling staff so that they can resolve the problems and possibly repeat the failed observations. This kind of feedback loop represents a case study for other automated data collection systems where rapid response to certain quantifiable events in the data is required. Observatory operations staff can install processes to look for these events either in the production pipeline or in an associated pipeline into which the appropriate data are piped. That process can then be used to notify scientists to evaluate the data and decide upon a response or to automatically initiate a response.

  20. Maximized Gust Loads of a Closed-Loop, Nonlinear Aeroelastic System Using Nonlinear Systems Theory

    Science.gov (United States)

    Silva, Walter A.

    1999-01-01

    The problem of computing the maximized gust load for a nonlinear, closed-loop aeroelastic aircraft is discusses. The Volterra theory of nonlinear systems is applied in order to define a linearized system that provides a bounds on the response of the nonlinear system of interest. The method is applied to a simplified model of an Airbus A310.

  1. Towards the use of Structural Loop Analysis to Study System Behaviour of Socio-Ecological Systems.

    Science.gov (United States)

    Abram, Joseph; Dyke, James

    2016-04-01

    Maintaining socio-ecological systems in desirable states is key to developing a growing economy, alleviating poverty and achieving a sustainable future. While the driving forces of an environmental system are often well known, the dynamics impacting these drivers can be hidden within a tangled structure of causal chains and feedback loops. A lack of understanding of a system's dynamic structure and its influence on a system's behaviour can cause unforeseen side-effects during model scenario testing and policy implementation. Structural Loop analysis of socio-ecological system models identifies dominant feedback structures during times of behavioural shift, allowing the user to monitor key influential drivers during model simulation. This work carries out Loop Eigenvalue Elasticity Analysis (LEEA) on three system dynamic models, exploring tipping points in lake systems undergoing eutrophication. The purpose is to explore the potential benefits and limitations of the technique in the field of socio-ecology. The LEEA technique shows promise for socio-ecological systems which undergo regime shifts or express oscillatory trends, but shows limited usefulness with large models. The results of this work highlight changes in feedback loop dominance, years prior to eutrophic tipping events in lake systems. LEEA could be used as an early warning signal to impending system changes, complementary to other known early warning signals. This approach could improve our understanding during critical times of a system's behaviour, changing how we approach model analysis and the way scenario testing and policy implementation are addressed in socio-ecological system models.

  2. Importance of Hydrogeological Conditions on Open-loop Geothermal System

    Science.gov (United States)

    Park, D.; Bae, G.; Kim, S.; Lee, K.

    2013-12-01

    The open-loop geothermal system has been known as an eco-friendly, energy-saving, and cost-efficient alternative for the cooling and heating of buildings with directly using the relatively stable temperature of groundwater. Thus, hydrogeological properties of aquifer, such as hydraulic conductivity and storage, must be important in the system application. The study site is located near Han-river, Korea, and because of the well-developed alluvium it might be a typical site appropriate to this system requiring an amount of groundwater. In this study, the first objective of numerical experiments was to find the best distributions of pumping and injection wells suitable to the hydrogeological conditions of the site for the efficient and sustainable system operation. The aquifer has a gravel layer at 15m depth below the ground surface and the river and the agricultural field, which may be a potential contaminant source, are located at the west and east sides, respectively. Under the general conditions that the regional groundwater flows from the east to the river, the locally reversed well distribution, locating the pumping well at upgradient and the injection well at downgradient of the regional flow, was most sustainable. The gravel layer with high hydraulic conductivity caused a little drawdown despite of an amount of pumping and allowed to stably reinject the used groundwater in all the cases, but it provided a passage transferring the injected heat to the pumping well quickly, particularly in the cases locating the injection well at the upgradient. This thermal interference was more severe in the cases of the short distance between the wells. The high conductive layer is also a reason that the seasonal role conversion of wells for the aquifer thermal energy storage was ineffective in this site. Furthermore, the well distribution vertical to the regional groundwater flow was stable, but not best, and, thus, it may be a good choice in the conditions that the regional

  3. Current systems of coronal loops in 3D MHD simulations

    CERN Document Server

    Warnecke, Jörn; Bingert, Sven; Peter, Hardi

    2016-01-01

    We study the magnetic field and current structure associated with a coronal loop. Through this we investigate to what extent the assumptions of a force-free magnetic field break down. We analyse a three-dimensional MHD model of the solar corona in an emerging active region with the focus on the structure of the forming coronal loops. The lower boundary of this simulation is taken from a model of an emerging active region. As a consequence of the emerging magnetic flux a coronal loop formes self-consistently. We investigate the current density along magnetic field lines inside (and outside) this loop and study the magnetic and plasma properties in and around this loop. The loop is defined as the bundle of field lines that coincides with enhanced emission in extreme UV. We find that the total current along the emerging loop changes its sign from being antiparallel to parallel to the magnetic field. Around the loop the currents form a complex non-force-free helical structure. This is directly related to a bipola...

  4. The Female Voice: Applications to Bowen's Family Systems Theory.

    Science.gov (United States)

    Knudson-Martin, Carmen

    1994-01-01

    Responds to calls from feminist scholars to address potential biases against women in theories of family therapy. Summarizes findings from studies of female development and integrates findings into expanded model of Bowen's family systems theory. Includes case example comparing expanded model with traditional application of Bowen's theory.…

  5. Clinical requirements for closed-loop control systems.

    Science.gov (United States)

    Clarke, William L; Renard, Eric

    2012-03-01

    Closed-loop (CL) therapy systems should be safe, efficacious, and easily manageable for type 1 diabetes mellitus patient use. For the first two clinical requirements, noninferiority and superiority criteria must be determined based on current conventional and intensive therapy outcomes. Current frequencies of hypoglycemia and diabetic ketoacidosis are reviewed and safety expectations for CL therapy systems are proposed. Glycosylated hemoglobin levels lower than current American Diabetes Association recommendations for different age groups are proposed as superiority criteria. Measures of glycemic variability are described and the recording of blood glucose levels as percentages within, above, and below a target range are suggested as reasonable alternatives to sophisticated statistical analyses. It is also suggested that Diabetes Quality of Life and Fear of Hypoglycemia surveys should be used to track psychobehavioral outcomes. Manageability requirements for safe and effective clinical management of CL systems are worth being underscored. The weakest part of the infusion system remains the catheter, which is exposed to variable and under-delivery incidents. Detection methods are needed to warn both the system and the patient about altered insulin delivery, including internal pressure and flow alarms. Glucose monitor sensor accuracy is another requirement; it includes the definition of conditions that lead to capillary glucose measurement, eventually followed by sensor recalibration or replacement. The crucial clinical requirement will be a thorough definition of the situations when the patient needs to move from CL to manual management of insulin delivery, or inversely can switch back to CL after a requested interruption. Instructions about these actions will constitute a major part of the education process of the patients before using CL systems and contribute to the manageability of these systems.

  6. Teleparallel loop quantum cosmology in a system of intersecting branes

    CERN Document Server

    Sepehri, Alireza; Beesham, A; de Haro, Jaume

    2016-01-01

    Recently, some authors have removed the big bang singularity in teleparallel Loop Quantum Cosmology (LQC) and have shown that the universe may undergo a number of oscillations. We investigate the origin of this type of teleparallel theory in a system of intersecting branes in M-theory in which the angle between them changes with time. This system is constructed by two intersecting anti-D8-branes, one compacted D4-brane and the other a D3-brane. These branes are built by joining M0-branes which develop in decaying fundamental strings. The compacted D4-brane is located between two intersecting anti-D8 branes and glues to one of them. Our universe is located on the D3 brane which wraps the D4 brane from one end and sticks to one of the anti-D8 branes from another one. In this system, there are three types of ?elds, corresponding to compacted D4 branes, intersecting branes and D3-branes. These ?elds interact with each other and make the angle between branes oscillate. By decreasing this angle and approaching the ...

  7. Bifurcations and stability of nondegenerated homoclinic loops for higher dimensional systems.

    Science.gov (United States)

    Jin, Yinlai; Li, Feng; Xu, Han; Li, Jing; Zhang, Liqun; Ding, Benyan

    2013-01-01

    By using the foundational solutions of the linear variational equation of the unperturbed system along the homoclinic orbit as the local current coordinates system of the system in the small neighborhood of the homoclinic orbit, we discuss the bifurcation problems of nondegenerated homoclinic loops. Under the nonresonant condition, existence, uniqueness, and incoexistence of 1-homoclinic loop and 1-periodic orbit, the inexistence of k-homoclinic loop and k-periodic orbit is obtained. Under the resonant condition, we study the existence of 1-homoclinic loop, 1-periodic orbit, 2-fold 1-periodic orbit, and two 1-periodic orbits; the coexistence of 1-homoclinic loop and 1-periodic orbit. Moreover, we give the corresponding existence fields and bifurcation surfaces. At last, we study the stability of the homoclinic loop for the two cases of non-resonant and resonant, and we obtain the corresponding criterions.

  8. Actuator prototype system by voice commands using free software

    Directory of Open Access Journals (Sweden)

    Jaime Andrango

    2016-06-01

    Full Text Available This prototype system is a software application that through the use of techniques of digital signal processing, extracts information from the user's speech, which is then used to manage the on/off actuator on a peripheral computer when vowels are pronounced. The method applies spectral differences. The application uses the parallel port as actuator, with the information recorded in the memory address 378H. This prototype was developed using free software tools for its versatility and dynamism, and to allow other researchers to base on it for further studies.

  9. The effect of different navigation voices on trust and attention while using in-vehicle navigation systems.

    Science.gov (United States)

    Large, David R; Burnett, Gary E

    2014-06-01

    Automobiles are suffused with computers and technology designed to support drivers at all levels of the driving hierarchy. Classic secondary devices, such as in-vehicle navigation systems (IVNS), present strategic and tactical information to drivers. In order to mitigate the potential distraction and workload when interacting with these devices while driving, IVNS often employ voices to deliver navigational instructions. In contrast, voices are used during interpersonal encounters to engage the listener, provide clues about the speaker's personality and make judgments about them, for example, whether to like them and to trust them. A study conducted within a fixed-based medium-fidelity driving simulator investigated if drivers made similar 'personality' attributions to voices emanating from an IVNS and if this subsequently affected how they engaged with the device while driving. Twenty-nine experienced drivers and IVNS users drove to a specified destination with a simulated IVNS and authentically reproduced UK road signage to support their route-finding. Either of two navigation voices were used; one considered 'high-trust' and the other 'low-trust.' Presented with a conflict scenario, where the verbal route guidance differed to the road signs, 22 drivers followed the IVNS instruction rather than the road signs. Of these, the majority were using the 'high-trust' voice. A post-drive questionnaire revealed that, despite the fact that message content and delivery remained equivalent, participants recognized different attributes ('personalities') associated with each of the navigation voices. This influenced their attitudes towards them, including how much they liked them, their preferences for use, and the level of trust that they associated with each voice. While these, so-called, social responses may be invited and indeed encouraged in other contexts, in the automotive domain they are likely to conflict with the intended benefits of using a voice to deliver route

  10. A closed-loop neurobotic system for fine touch sensing

    Science.gov (United States)

    Bologna, L. L.; Pinoteau, J.; Passot, J.-B.; Garrido, J. A.; Vogel, J.; Ros Vidal, E.; Arleo, A.

    2013-08-01

    Objective. Fine touch sensing relies on peripheral-to-central neurotransmission of somesthetic percepts, as well as on active motion policies shaping tactile exploration. This paper presents a novel neuroengineering framework for robotic applications based on the multistage processing of fine tactile information in the closed action-perception loop. Approach. The integrated system modules focus on (i) neural coding principles of spatiotemporal spiking patterns at the periphery of the somatosensory pathway, (ii) probabilistic decoding mechanisms mediating cortical-like tactile recognition and (iii) decision-making and low-level motor adaptation underlying active touch sensing. We probed the resulting neural architecture through a Braille reading task. Main results. Our results on the peripheral encoding of primary contact features are consistent with experimental data on human slow-adapting type I mechanoreceptors. They also suggest second-order processing by cuneate neurons may resolve perceptual ambiguities, contributing to a fast and highly performing online discrimination of Braille inputs by a downstream probabilistic decoder. The implemented multilevel adaptive control provides robustness to motion inaccuracy, while making the number of finger accelerations covariate with Braille character complexity. The resulting modulation of fingertip kinematics is coherent with that observed in human Braille readers. Significance. This work provides a basis for the design and implementation of modular neuromimetic systems for fine touch discrimination in robotics.

  11. Teleparallel loop quantum cosmology in a system of intersecting branes

    Directory of Open Access Journals (Sweden)

    Alireza Sepehri

    2016-09-01

    Full Text Available Recently, some authors have removed the big bang singularity in teleparallel Loop Quantum Cosmology (LQC and have shown that the universe may undergo a number of oscillations. We investigate the origin of this type of teleparallel theory in a system of intersecting branes in M-theory in which the angle between them changes with time. This system is constructed by two intersecting anti-D8-branes, one compacted D4-brane and a D3-brane. These branes are built by joining M0-branes which develop in decaying fundamental strings. The compacted D4-brane is located between two intersecting anti-D8 branes and glues to one of them. Our universe is located on the D3 brane which wraps around the D4 brane from one end and sticks to one of the anti-D8 branes from the other one. In this system, there are three types of fields, corresponding to compacted D4 branes, intersecting branes and D3-branes. These fields interact with each other and make the angle between branes oscillate. By decreasing this angle, the intersecting anti-D8 branes approach each other, the D4 brane rolls, the D3 brane wraps around the D4 brane, and the universe contracts. By separating the intersecting branes and increasing the angle, the D4 brane rolls in the opposite direction, the D3 brane separates from it and the expansion branch begins. Also, the interaction between branes in this system gives us the exact form of the relevant Lagrangian for teleparallel LQC.

  12. Miniature Loop Heat Pipe (MLHP) Thermal Management System

    Science.gov (United States)

    Ku, Jentung

    2004-01-01

    The MLHP Thermal Management System consists of a loop heat pipe (LHP) with multiple evaporators and condensers, thermal electrical coolers, and deployable radiators coated with variable emittance coatings (VECs). All components are miniaturized. It retains all the performance characteristics of state-of-the-art LHPs and offers additional advantages to enhance the functionality, versatility, and reliability of the system, including flexible locations of instruments and radiators, a single interface temperature for multiple instruments, cooling the on instruments and warming the off instruments simultaneously, improving. start-up success, maintaining a constant LHP operating temperature over a wide range of instrument powers, effecting automatic thermal switching and thermal diode actions, and reducing supplemental heater powers. It can fully achieve low mass, low power and compactness necessary for future small spacecraft. Potential applications of the MLHP thermal technology for future missions include: 1) Magnetospheric Constellation; 2) Solar Sentinels; 3) Mars Science Laboratory; 4) Mars Scouts; 5) Mars Telecom Orbiter; 6) Space Interferometry Mission; 7) Laser Interferometer Space Antenna; 8) Jupiter Icy Moon Orbiter; 9) Terrestrial Planet Finder; 10) Single Aperture Far-Infrared Observatory, and 11) Exploration Missions. The MLHP Thermal Management System combines the operating features of a variable conductance heat pipe, a thermal switch, a thermal diode, and a state-of-the-art LHP into a single integrated thermal system. It offers many advantages over conventional thermal control techniques, and can be a technology enabler for future space missions. Successful flight validation will bring the benefits of MLHP technology to the small satellite arena and will have cross-cutting applications to both Space Science and Earth Science Enterprises.

  13. Teleparallel loop quantum cosmology in a system of intersecting branes

    Science.gov (United States)

    Sepehri, Alireza; Pradhan, Anirudh; Beesham, Aroonkumar; de Haro, Jaume

    2016-09-01

    Recently, some authors have removed the big bang singularity in teleparallel Loop Quantum Cosmology (LQC) and have shown that the universe may undergo a number of oscillations. We investigate the origin of this type of teleparallel theory in a system of intersecting branes in M-theory in which the angle between them changes with time. This system is constructed by two intersecting anti-D8-branes, one compacted D4-brane and a D3-brane. These branes are built by joining M0-branes which develop in decaying fundamental strings. The compacted D4-brane is located between two intersecting anti-D8 branes and glues to one of them. Our universe is located on the D3 brane which wraps around the D4 brane from one end and sticks to one of the anti-D8 branes from the other one. In this system, there are three types of fields, corresponding to compacted D4 branes, intersecting branes and D3-branes. These fields interact with each other and make the angle between branes oscillate. By decreasing this angle, the intersecting anti-D8 branes approach each other, the D4 brane rolls, the D3 brane wraps around the D4 brane, and the universe contracts. By separating the intersecting branes and increasing the angle, the D4 brane rolls in the opposite direction, the D3 brane separates from it and the expansion branch begins. Also, the interaction between branes in this system gives us the exact form of the relevant Lagrangian for teleparallel LQC.

  14. Wireless Controlled Methods via Voice and Internet (e-mail for Home Automation System

    Directory of Open Access Journals (Sweden)

    R.A.Ramlee

    2013-08-01

    Full Text Available This paper presents a wireless Home Automation System (HAS that mainly performed by computer. The system is designed with several control methods in order to control the target electrical appliances. This various control methods implemented to fulfill the needs of users at home even at outside. The computer application is designed in Microsoft Windows OS that integrated with speech recognition voice control by using Microsoft Speech Application Programming Interface (SAPI. The voice control method provides more convenience especially to the blind and paralyzed users at home. This system is designed to perform short distance control by using wireless Bluetooth technology and long distance control by using Simple Mail Transfer Protocol (SMTP email control method. The short distance control is considered as the control that performed inside the house. Moreover, the long distance control can be performed at everywhere by devices that installed with browser or email application, and also with the internet access. The system intended to control electrical appliances at home with relatively low cost design, user-friendly interface and ease of installation.

  15. Student Modelling in an Intelligent Tutoring System for the Passive Voice of English Language

    Directory of Open Access Journals (Sweden)

    Dimitris Maras

    2000-01-01

    Full Text Available This paper describes an intelligent multimedia tutoring system for the passive voice of the English grammar. The system may be used to present theoretical issues about the passive voice and to provide exercises that the student may solve. The main focus of the tutor is on the student's error diagnosis process, which is performed by the student modelling component. When the student types the solution to an exercise, the system examines the correctness of the answer. If the student's answer has been erroneous it attempts to diagnose the underlying misconception of the mistake. In order to provide individualised help, the system holds a profile for every student, the long term student model. The student’s progress and his/her usual mistakes are recorded to this long term student model. This kind of information is used for the individualised error diagnosis of the student in subsequent sessions. In addition, the information stored about the student can also be used for the resolution of an arising ambiguity, as to what the underlying cause of a student error has been.

  16. Distributed information-processing system with voice control based on OS Android

    Directory of Open Access Journals (Sweden)

    E. V. Apolonov

    2012-12-01

    Full Text Available Introduction: Trends of increase of ACS and AIS and their use in everyday life are discussed. The need a voice mode of human interaction with AIS is mentioned. Noticed that network integration of AIS allows to combine their resources and contributes to progress in speech recognition. The emergence of smart phones and their widespread use is the desire to use them as personal voice terminals for access to distributed information networks. Main part: Possibility of use of Android-based personal portable mobile devices (PPMD like terminals and like autonomous units, as well as possibility of use of Windows-based stationary PC like servers of distributed data-processing system (DDPS with voice control are considered. Criteria for selection of PPMD and OS of client terminals, as well as requirements DDPS and its structure are formulated. Concept of building of DDPS by "client - server" and "a lot of clients — many servers" technologies are submitted. Concept of a PPMD virtual interface and server virtual interface are offered. Communication between threads within the process of the PPMD virtual interface of client terminal and the interaction between the processes of the client and server in the autonomous mode, as well as in the DDPS mode are considered. The results of experimental tests of the prototype of DDPS when exchanging data between Windows and Android clients, and Windows Server are running; the accuracy and reliability of embedded solutions and scalability of DDPS are confirmed. Conclusions: Modern PPMD on Android OS with can be used as terminal devices for construction on the basis of their different specialized voice control DDPS with technology "client - server" and "a lot of customers - many servers". Unification APIs of PPMD with different OS can be done by implementing a virtual PPMD interface. Exchanging data between processes of DDPS better sell through technology Berkeley sockets, which are supported by most modern operating

  17. Molten Salt Test Loop (MSTL) system customer interface document.

    Energy Technology Data Exchange (ETDEWEB)

    Gill, David Dennis; Kolb, William J.; Briggs, Ronald D.

    2013-09-01

    The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate %E2%80%9Csolar salt%E2%80%9D and can circulate the salt at pressure up to 40 bar (600psi), temperature to 585%C2%B0C, and flow rate of 44-50kg/s(400-600GPM) depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

  18. Hardware in Loop Simulation for Missile Guidance and Control Systems

    Directory of Open Access Journals (Sweden)

    S. K. Chaudhuri

    1997-07-01

    Full Text Available The purpose of the guidance law is to determine appropriate missile flight path dynamics to achieve mission objective in an efficient manner based on navigation information. Today, guided missiles which are aerodynamically unstable or non-linear in all or part of the flight envelopes need control systems for stability as well as for steering. Many classical guidance and control laws have been used for tactical missiles with varying degrees of performance, complexity and seeker/sensor requirements. Increased accuracy requirements and more dynamic tactics of modern warfare demand improvement of performance which is a trade-off between sophisticated hardware and more sophisticated software. To avoid increase in cost by hardware sophistication, today's trend is to exploit new theoretical methods and low cost high speed microprocessor techniques. Missile test flights are very expensive. The missile system with its sophisticated software and hardware is not reusable after a test launch. Hardware-in-loop Simulation (HILS facilities and methodology form a well integrated system aimed at transforming a preliminary guidance and control system design to flight software and hardware with trajectory right from lift-off till its impact. Various guidance and control law studies pertaining to gathering basket and stability margins, pre-flight, post-flight analyses and validation of support systems have been carried out using this methodology. Nearly full spectrum of dynamically accurate six-degrees-of-freedom (6-DOF model of missile systems has been realised in the HILS scenario. The HILS facility allows interconnection of missile hardware in flight configuration. Pre-flight HILS results have matched fairly well with actual flight trial results. It was possible to detect many hidden defects in the onboard guidance and control software as well as in hardware during HILS. Deficiencies in model, like tail-wag-dog (TWD, flexibility, seeker dynamics and defects in

  19. Simulation of open-loop plasma vertical movement response in the Damavand tokamak using closed-loop subspace system identification

    Science.gov (United States)

    Darestani Farahani, N.; Abbasi Davani, F.

    2016-02-01

    The formulation of a multi-input single-output closed-loop subspace method for system identification has been employed for the purpose of obtaining control-relevant model of the open loop response for plasma vertical movement in the Damavand tokamak. Such a model is particularly well suited for the robust controller design. The method described in this paper is a kind of worst-case identification technique, aiming to minimize the error between the identified model and the true plant. The accuracy of the estimation of the plant dynamics has been tested by different experiments. The fitness of the identified model around the defined operating point has been more than 90%, and compared to the physical-based model, it has better root mean squared error (RMSE) measure of the goodness of fitting.

  20. Voice Matching Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Abhishek Bal

    2014-03-01

    Full Text Available In this paper, the use of Genetic Algorithm (GA for voice recognition is described. The practical application of Genetic Algorithm (GA to the solution of engineering problem is a rapidly emerging approach in the field of control engineering and signal processing. Genetic algorithms are useful for searching a space in multi-directional way from large spaces and poorly defined space. Voice is a signal of infinite information. Digital processing of voice signal is very important for automatic voice recognition technology. Nowadays, voice processing is very much important in security mechanism due to mimicry characteristic. So studying the voice feature extraction in voice processing is very necessary in military, hospital, telephone system, investigation bureau and etc. In order to extract valuable information from the voice signal, make decisions on the process, and obtain results, the data needs to be manipulated and analyzed. In this paper, if the instant voice is not matched with same person’s reference voices in the database, then Genetic Algorithm (GA is applied between two randomly chosen reference voices. Again the instant voice is compared with the result of Genetic Algorithm (GA which is used, including its three main steps: selection, crossover and mutation. We illustrate our approach with different sample of voices from human in our institution.

  1. System and method for characterizing voiced excitations of speech and acoustic signals, removing acoustic noise from speech, and synthesizing speech

    Energy Technology Data Exchange (ETDEWEB)

    Burnett, Greg C.; Holzrichter, John F.; Ng, Lawrence C.

    2006-02-14

    The present invention is a system and method for characterizing human (or animate) speech voiced excitation functions and acoustic signals, for removing unwanted acoustic noise which often occurs when a speaker uses a microphone in common environments, and for synthesizing personalized or modified human (or other animate) speech upon command from a controller. A low power EM sensor is used to detect the motions of windpipe tissues in the glottal region of the human speech system before, during, and after voiced speech is produced by a user. From these tissue motion measurements, a voiced excitation function can be derived. Further, the excitation function provides speech production information to enhance noise removal from human speech and it enables accurate transfer functions of speech to be obtained. Previously stored excitation and transfer functions can be used for synthesizing personalized or modified human speech. Configurations of EM sensor and acoustic microphone systems are described to enhance noise cancellation and to enable multiple articulator measurements.

  2. System and method for characterizing voiced excitations of speech and acoustic signals, removing acoustic noise from speech, and synthesizing speech

    Energy Technology Data Exchange (ETDEWEB)

    Burnett, Greg C. (Livermore, CA); Holzrichter, John F. (Berkeley, CA); Ng, Lawrence C. (Danville, CA)

    2006-08-08

    The present invention is a system and method for characterizing human (or animate) speech voiced excitation functions and acoustic signals, for removing unwanted acoustic noise which often occurs when a speaker uses a microphone in common environments, and for synthesizing personalized or modified human (or other animate) speech upon command from a controller. A low power EM sensor is used to detect the motions of windpipe tissues in the glottal region of the human speech system before, during, and after voiced speech is produced by a user. From these tissue motion measurements, a voiced excitation function can be derived. Further, the excitation function provides speech production information to enhance noise removal from human speech and it enables accurate transfer functions of speech to be obtained. Previously stored excitation and transfer functions can be used for synthesizing personalized or modified human speech. Configurations of EM sensor and acoustic microphone systems are described to enhance noise cancellation and to enable multiple articulator measurements.

  3. System and method for characterizing voiced excitations of speech and acoustic signals, removing acoustic noise from speech, and synthesizing speech

    Energy Technology Data Exchange (ETDEWEB)

    Burnett, Greg C.; Holzrichter, John F.; Ng, Lawrence C.

    2004-03-23

    The present invention is a system and method for characterizing human (or animate) speech voiced excitation functions and acoustic signals, for removing unwanted acoustic noise which often occurs when a speaker uses a microphone in common environments, and for synthesizing personalized or modified human (or other animate) speech upon command from a controller. A low power EM sensor is used to detect the motions of windpipe tissues in the glottal region of the human speech system before, during, and after voiced speech is produced by a user. From these tissue motion measurements, a voiced excitation function can be derived. Further, the excitation function provides speech production information to enhance noise removal from human speech and it enables accurate transfer functions of speech to be obtained. Previously stored excitation and transfer functions can be used for synthesizing personalized or modified human speech. Configurations of EM sensor and acoustic microphone systems are described to enhance noise cancellation and to enable multiple articulator measurements.

  4. System And Method For Characterizing Voiced Excitations Of Speech And Acoustic Signals, Removing Acoustic Noise From Speech, And Synthesizi

    Energy Technology Data Exchange (ETDEWEB)

    Burnett, Greg C. (Livermore, CA); Holzrichter, John F. (Berkeley, CA); Ng, Lawrence C. (Danville, CA)

    2006-04-25

    The present invention is a system and method for characterizing human (or animate) speech voiced excitation functions and acoustic signals, for removing unwanted acoustic noise which often occurs when a speaker uses a microphone in common environments, and for synthesizing personalized or modified human (or other animate) speech upon command from a controller. A low power EM sensor is used to detect the motions of windpipe tissues in the glottal region of the human speech system before, during, and after voiced speech is produced by a user. From these tissue motion measurements, a voiced excitation function can be derived. Further, the excitation function provides speech production information to enhance noise removal from human speech and it enables accurate transfer functions of speech to be obtained. Previously stored excitation and transfer functions can be used for synthesizing personalized or modified human speech. Configurations of EM sensor and acoustic microphone systems are described to enhance noise cancellation and to enable multiple articulator measurements.

  5. IDENTIFICATION OF BOTH CLOSED—AND OPEN—LOOP STOCHASTIC SYSTEM WHILE STABILIZING IT

    Institute of Scientific and Technical Information of China (English)

    CHENHanfu

    2002-01-01

    This paper proposes a recursive algorithm estimating coefficients of the linear stochastic control system(ARX system) driven by a martingale difference sequence,while adaptively stabilizing the system without introdudcing external excitation signal.The system is allowed to be unstable and of nonminimum-phase.The estimates derived for the coefficients of both closed-loop and open-loop systems are strongly consistent.

  6. Design of real-time voice over internet protocol system under bandwidth network

    Science.gov (United States)

    Zhang, Li; Gong, Lina

    2017-04-01

    With the increasing bandwidth of the network and network convergence accelerating, VoIP means of communication across the network is becoming increasingly popular phenomenon. The real-time identification and analysis for VOIP flow over backbone network become the urgent needs and research hotspot of network operations management. Based on this, the paper proposes a VoIP business management system over backbone network. The system first filters VoIP data stream over backbone network and further resolves the call signaling information and media voice. The system can also be able to design appropriate rules to complete real-time reduction and presentation of specific categories of calls. Experimental results show that the system can parse and process real-time backbone of the VoIP call, and the results are presented accurately in the management interface, VoIP-based network traffic management and maintenance provide the necessary technical support.

  7. V2S: Voice to Sign Language Translation System for Malaysian Deaf People

    Science.gov (United States)

    Mean Foong, Oi; Low, Tang Jung; La, Wai Wan

    The process of learning and understand the sign language may be cumbersome to some, and therefore, this paper proposes a solution to this problem by providing a voice (English Language) to sign language translation system using Speech and Image processing technique. Speech processing which includes Speech Recognition is the study of recognizing the words being spoken, regardless of whom the speaker is. This project uses template-based recognition as the main approach in which the V2S system first needs to be trained with speech pattern based on some generic spectral parameter set. These spectral parameter set will then be stored as template in a database. The system will perform the recognition process through matching the parameter set of the input speech with the stored templates to finally display the sign language in video format. Empirical results show that the system has 80.3% recognition rate.

  8. Admission Control of Integrated Voice and Data CDMA/TDD System Considering Asymmetric Traffic and Power Limit

    Institute of Scientific and Technical Information of China (English)

    CAOYanbo; ZHOUBin; LIChengshu

    2004-01-01

    In this paper, we research an admission control scheme of integrated voice and data CDMA/TDD (Code division multiple access/Time division duplex) system considering asymmetric traffic and power limit. A new user can access the system only if the outage probabilities it experiences on the uplink and downlink time slots are below a threshold value. Based on the power limit the results show the voice and data blocking probabilities under different cell coverage~ arrival rates and various uplink/downlink time slot allocation patterns. Furthermore, multicode and multislot schemes are also evaluated under the presented admission control scheme.

  9. Voice Disorders

    Science.gov (United States)

    Voice is the sound made by air passing from your lungs through your larynx, or voice box. In your larynx are your vocal cords, ... to make sound. For most of us, our voices play a big part in who we are, ...

  10. Every Voice

    Science.gov (United States)

    Patrick, Penny

    2008-01-01

    This article discusses how the author develops an approach that allows her students, who are part of the marginalized population, to learn the power of their own voices--not just their writing voices, but their oral voices as well. The author calls it "TWIST": Thoughts, Writing folder, Inquiring mind, Supplies, and Teamwork. It is where…

  11. Every Voice

    Science.gov (United States)

    Patrick, Penny

    2008-01-01

    This article discusses how the author develops an approach that allows her students, who are part of the marginalized population, to learn the power of their own voices--not just their writing voices, but their oral voices as well. The author calls it "TWIST": Thoughts, Writing folder, Inquiring mind, Supplies, and Teamwork. It is where…

  12. Voice restoration

    NARCIS (Netherlands)

    Hilgers, F.J.M.; Balm, A.J.M.; van den Brekel, M.W.M.; Tan, I.B.; Remacle, M.; Eckel, H.E.

    2010-01-01

    Surgical prosthetic voice restoration is the best possible option for patients to regain oral communication after total laryngectomy. It is considered to be the present "gold standard" for voice rehabilitation of laryngectomized individuals. Surgical prosthetic voice restoration, in essence, is alwa

  13. A Novel Controller for Model with Combined LFC and AVR Loops of Single Area Power System

    Science.gov (United States)

    Gupta, Monika; Srivastava, Smriti; Gupta, J. R. P.

    2016-03-01

    In this study, a novel controller is designed to study low frequency oscillations for load frequency control (LFC) and voltage control of a single area power system. For more accuracy in dynamic and steady state responses, mutual effects between LFC and automatic voltage regulation (AVR) loops are investigated in a combined simulink model of LFC and AVR loops. The effectiveness of the proposed controller is first simulated on model with LFC loop alone. The proposed controller is a hybrid of neural network and fast traversal filters. The proposed hybrid controller requires less number of samples for training of weights, thus making the system fast. To study the coupling effects of AVR and LFC loops, dynamic performance of a complete system model for low frequency oscillation studies comprising of mechanical and electrical loops is done with the proposed controller.

  14. Voice over Internet Protocol (VoIP) Technology as a Global Learning Tool: Information Systems Success and Control Belief Perspectives

    Science.gov (United States)

    Chen, Charlie C.; Vannoy, Sandra

    2013-01-01

    Voice over Internet Protocol- (VoIP) enabled online learning service providers struggling with high attrition rates and low customer loyalty issues despite VoIP's high degree of system fit for online global learning applications. Effective solutions to this prevalent problem rely on the understanding of system quality, information quality, and…

  15. Control of open-loop neutrally stable systems subject to actuator saturation and external disturbances

    NARCIS (Netherlands)

    Wang, Xu; Saberi, Ali; Grip, H°avard Fjær; Stoorvogel, Antonie Arij

    2013-01-01

    In this paper, we study the disturbance response of open-loop neutrally stable linear systems with saturating linear feedback controller. It is shown that the closed-loop states remain bounded if the disturbances con- sists of those signals that do not have large sustained frequency components

  16. Beyond Waste Reduction: Creating Value with Information Systems in Closed-Loop Supply Chains

    NARCIS (Netherlands)

    O.R. Koppius (Otto); O. Ozdemir (Oznur); E.A. van der Laan (Erwin)

    2011-01-01

    textabstractWe study the role of information systems in enabling closed-loop supply chains. Past research in green IS and closed-loop supply chains has shown that it can result in substantial cost savings and waste reduction. We complement this research by showing that the effects are more than

  17. A Moral Experience Feedback Loop: Modeling a System of Moral Self-Cultivation in Everyday Life

    Science.gov (United States)

    Sherblom, Stephen A.

    2015-01-01

    This "systems thinking" model illustrates a common feedback loop by which people engage the moral world and continually reshape their moral sensibility. The model highlights seven processes that collectively form this feedback loop: beginning with (1) one's current moral sensibility which shapes processes of (2) perception, (3)…

  18. A Moral Experience Feedback Loop: Modeling a System of Moral Self-Cultivation in Everyday Life

    Science.gov (United States)

    Sherblom, Stephen A.

    2015-01-01

    This "systems thinking" model illustrates a common feedback loop by which people engage the moral world and continually reshape their moral sensibility. The model highlights seven processes that collectively form this feedback loop: beginning with (1) one's current moral sensibility which shapes processes of (2) perception, (3)…

  19. Communication between Nested Loop Programs via Circular Buffers in an Embedded Multiprocessor System

    NARCIS (Netherlands)

    Bijlsma, Tjerk; Bekooij, Marco; Jansen, Pierre; Smit, Gerard; Falk, H.

    2008-01-01

    Multimedia applications, executed by embedded multiprocessor systems, can in some cases be represented as task graphs, with the tasks containing nested loop programs. The nested loop programs communicate via arrays and can be executed on different processors. Typically an array can be communicated v

  20. Closed-loop Identification for Control of Linear Parameter Varying Systems

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, Klaus

    2014-01-01

    , closed- loop system identification is more difficult than open-loop identification. In this paper we prove that the so-called Hansen Scheme, a technique known from linear time-invariant systems theory for transforming closed-loop system identification problems into open-loop-like problems, can......This paper deals with system identification for control of linear parameter varying systems. In practical applications, it is often important to be able to identify small plant changes in an incremental manner without shutting down the system and/or disconnecting the controller; unfortunately...... be extended to accommodate linear parameter varying systems as well. We investigate the identified subsystem’s parameter dependency and observe that, under mild assumptions, the identified subsystem is affine in the parameter vector. Various identification methods are compared in direct and Hansen Scheme...

  1. Heating and dynamics of two flare loop systems observed by AIA and EIS

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y.; Ding, M. D. [School of Astronomy and Space Science, Nanjing University, Nanjing 210093 (China); Qiu, J., E-mail: yingli@nju.edu.cn [Department of Physics, Montana State University, Bozeman, MT 59717 (United States)

    2014-02-01

    We investigate heating and evolution of flare loops in a C4.7 two-ribbon flare on 2011 February 13. From Solar Dynamics Observatory/Atmospheric Imaging Assembly (AIA) imaging observations, we can identify two sets of loops. Hinode/EUV Imaging Spectrometer (EIS) spectroscopic observations reveal blueshifts at the feet of both sets of loops. The evolution and dynamics of the two sets are quite different. The first set of loops exhibits blueshifts for about 25 minutes followed by redshifts, while the second set shows stronger blueshifts, which are maintained for about one hour. The UV 1600 observation by AIA also shows that the feet of the second set of loops brighten twice. These suggest that continuous heating may be present in the second set of loops. We use spatially resolved UV light curves to infer heating rates in the few tens of individual loops comprising the two loop systems. With these heating rates, we then compute plasma evolution in these loops with the 'enthalpy-based thermal evolution of loops' model. The results show that, for the first set of loops, the synthetic EUV light curves from the model compare favorably with the observed light curves in six AIA channels and eight EIS spectral lines, and the computed mean enthalpy flow velocities also agree with the Doppler shift measurements by EIS. For the second set of loops modeled with twice-heating, there are some discrepancies between modeled and observed EUV light curves in low-temperature bands, and the model does not fully produce the prolonged blueshift signatures as observed. We discuss possible causes for the discrepancies.

  2. DESIGNING A FINITE STATE MACHINE SIMULATOR TO DETECT LOOPS FOR ALICE DETECTOR CONTROL SYSTEM

    CERN Document Server

    Yogatama, Bobbi Winema

    2017-01-01

    This paper present the design and implementation of a Finite State Machine simulator to provoke loops in ALICE Detector Control System (DCS). Loops in a Finite State Machine can be very harmful for the control system and need to be prevented. One way to prevent loops is to simulate the designed Finite State Machine using a simulator that can detect all of the possible conditions that can provoke loops. Further correction can then be made after the loops are detected in the control system. The proposed simulator is able to get the structure of any unknown FSM, get every datapoint elements that are associated with the FSM, and find every possible datapoint combinations that can provoke loops in the FSM. At the end of the project, we tested the simulator on a sample FSM with loops and a real FSM that belongs to the ALICE PHOton Spectrometer (PHOS). The testing results indicate that the simulator is able to detect every possible condition that can cause loops in the FSM.

  3. Development of Phase Lock Loop System for Synchronisation of a ...

    African Journals Online (AJOL)

    Akorede

    ABSTRACT: Phase locked loop (PLL) is an important part of the control unit of the grid connected power converter. The method of zero ... an output signal proportional to the phase difference between the input ... In their works, a proper PI regulator was designed ..... the course of this work for better performance analysis, it is.

  4. Behavioral analysis of differential Hebbian learning in closed-loop systems

    DEFF Research Database (Denmark)

    Kulvicius, Tomas; Kolodziejski, Christoph; Tamosiunaite, Minija

    2010-01-01

    Understanding closed loop behavioral systems is a non-trivial problem, especially when they change during learning. Descriptions of closed loop systems in terms of information theory date back to the 1950s, however, there have been only a few attempts which take into account learning, mostly...... measuring information of inputs. In this study we analyze a specific type of closed loop system by looking at the input as well as the output space. For this, we investigate simulated agents that perform differential Hebbian learning (STDP). In the first part we show that analytical solutions can be found...

  5. Comparing Subspace Methods for Closed Loop Subspace System Identification by Monte Carlo Simulations

    Directory of Open Access Journals (Sweden)

    David Di Ruscio

    2009-10-01

    Full Text Available A novel promising bootstrap subspace system identification algorithm for both open and closed loop systems is presented. An outline of the SSARX algorithm by Jansson (2003 is given and a modified SSARX algorithm is presented. Some methods which are consistent for closed loop subspace system identification presented in the literature are discussed and compared to a recently published subspace algorithm which works for both open as well as for closed loop data, i.e., the DSR_e algorithm as well as the bootstrap method. Experimental comparisons are performed by Monte Carlo simulations.

  6. Thermal behaviour analysis on ITER component cooling water system loop 2B

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Bin, E-mail: guobin@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Fu, Peng [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Dell’Orco, Giovanni; Liliana, Teodoros; Tao, Jun [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Yang, Lei [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

    2015-11-15

    Highlights: • Thermal hydraulic analysis model has been developed to perform thermal analysis on the component cooling water system loop 2B. • The cooling water temperature profile at client inlet and outlet during one cycle of the most demanding plasma operation scenario was obtained. • Operation behaviour of the main heat exchanger for CCWS-2B has been depicted. - Abstract: ITER cooling water system is composed by several cooling loops, the primary heat transfer loops that form the Tokamak Cooling Water System (TCWS), the secondary heat transfer loops that form the Component Cooling Water System (CCWS) and the Chilled Water System (CHWS) and a tertiary heat transfer loop which is the Heat Rejection System (HRS). The CCWS is further divided into CCWS-1, CCWS-2A, CCWS-2B, CCWS-2C, CCWS-2D depending on the water chemistry needs of clients and wetted area material. The component cooling water system loop 2B (CCWS-2B) has the function to remove heat load from coil power supply component, Neutral Beam Injectors (NBIs) system component and diagnostic system which are located in different buildings. As the total number of the client connections for the loop is a few hundreds, simplified thermal hydraulic analysis model has been developed to perform thermal analysis on the component cooling water system loop 2B. The curve of the cooling water temperature at client inlet and outlet during one cycle of the most demanding plasma operation scenario was obtained and the cooling water flow rate can meet the thermal removal requirement of client was also confirmed from this analysis. In addition, operation behaviour of the main heat exchanger for CCWS-2B in this thermal analysis was depicted for main heat exchanger selection purposes. This study has been carried out with the AFT Fathom code.

  7. Determination of Close Loop System Stability in Automobile Adaptive Cruise Control Systems

    Directory of Open Access Journals (Sweden)

    Owunna Ikechukwu

    2016-07-01

    Full Text Available The beginning of the 21st century sees auto makers pursuing research in advanced features like collision warning and avoidance system into their product. Automotive cruise control system has been undergoing development in EU since the PROMETHEUS programme in the late 1980’s, and has currently metamorphous into Adaptive Cruise Control (ACC technology which is presently emerging in the automotive market as a convenience function intended to reduce driver workload. Adaptive cruise control is the first of the new generation of advanced driver’s assistance devices to reach the market, which partially automates the driver’s task and bringing the drivers comfort into perspective. It allows the host vehicle to maintain a set speed and distance from preceding vehicles by a forward object detection sensor. The forward object detection sensor is the focal point of the ACC system, which determines and regulates vehicle acceleration and deceleration through a powertrain torque control system and an automatic brake control system. This study presents overview of adaptive cruise control system, operation principles and the advantages of integrating ACC system in automobiles. Also, the system must be stable for optimum performance, and stability of a close loop system which the cruise system is an example, was determined by calculating the controller gain (K1, K2, K3 and substituting into the characteristic equations. The stability of a close loop system for the values of K1, K2 and K3 when substituted into the characteristic equation produced a negative real part. To achieve stability in close loop systems, all the poles must have negative real values and this is in line with the values obtain for p1, p2 and p3. From the pole zero plots of 1 = (-7 ± 7.14, 2 = (-7± 11.60 and 3 = (-0.08 and -13.91, stability of the system was achieved

  8. Beyond Waste Reduction: Creating Value with Information Systems in Closed-Loop Supply Chains

    OpenAIRE

    Koppius, Otto; Ozdemir, Oznur; Laan, Erwin

    2011-01-01

    textabstractWe study the role of information systems in enabling closed-loop supply chains. Past research in green IS and closed-loop supply chains has shown that it can result in substantial cost savings and waste reduction. We complement this research by showing that the effects are more than that: using information systems can also create business value for a firm in closed-loop supply chains. We make a novel distinction between four types of value: sourcing value, environmental value, cus...

  9. VoiceRelay: voice key operation using visual basic.

    Science.gov (United States)

    Abrams, Lise; Jennings, David T

    2004-11-01

    Using a voice key is a popular method for recording vocal response times in a variety of language production tasks. This article describes a class module called VoiceRelay that can be easily utilized in Visual Basic programs for voice key operation. This software-based voice key offers the precision of traditional voice keys (although accuracy is system dependent), as well as the flexibility of volume and sensitivity control. However, VoiceRelay is a considerably less expensive alternative for recording vocal response times because it operates with existing PC hardware and does not require the purchase of external response boxes or additional experiment-generation software. A sample project demonstrating implementation of the VoiceRelay class module may be downloaded from the Psychonomic Society Web archive, www.psychonomic.org/archive.

  10. A Triple-Loop Inductive Power Transmission System for Biomedical Applications.

    Science.gov (United States)

    Lee, Byunghun; Kiani, Mehdi; Ghovanloo, Maysam

    2016-02-01

    A triple-loop wireless power transmission (WPT) system equipped with closed-loop global power control, adaptive transmitter (Tx) resonance compensation (TRC), and automatic receiver (Rx) resonance tuning (ART) is presented. This system not only opposes coupling and load variations but also compensates for changes in the environment surrounding the inductive link to enhance power transfer efficiency (PTE) in applications such as implantable medical devices (IMDs). The Tx was built around a commercial off-the-shelf (COTS) radio-frequency identification (RFID) reader, operating at 13.56 MHz. A local Tx loop finds the optimal capacitance in parallel with the Tx coil by adjusting a varactor. A global power control loop maintains the received power at a desired level in the presence of changes in coupling distance, coil misalignments, and loading. Moreover, a local Rx loop is implemented inside a power management integrated circuit (PMIC) to avoid PTE degradation due to the Rx coil surrounding environment and process variations. The PMIC was fabricated in a 0.35- μm 4M2P standard CMOS process with 2.54 mm(2) active area. Measurement results show that the proposed triple-loop system improves the overall PTE by up to 10.5% and 4.7% compared to a similar open- and single closed-loop system, respectively, at nominal coil distance of 2 cm. The added TRC and ART loops contribute 2.3% and 1.4% to the overall PTE of 13.5%, respectively. This is the first WPT system to include three loops to dynamically compensate for environment and circuit variations and improve the overall power efficiency all the way from the driver output in Tx to the load in Rx.

  11. A solar assisted polygeneration system integrating methane reforming and chemical looping combustion with zero carbon emission

    National Research Council Canada - National Science Library

    WANG, Jiangjiang; FU, Chao

    2017-01-01

    .... This paper combines chemical-looping combustion (CLC) and methane reforming with CO2 to accomplish CO2 capture and utilization and proposes a novel polygeneration system to produce syngas, electricity, chilled water for cooling, and hot water...

  12. An integrable Hamiltonian hierarchy, a high-dimensional loop algebra and associated integrable coupling system

    Institute of Scientific and Technical Information of China (English)

    张玉峰

    2003-01-01

    A subalgebra of loop algebra A2 is established. Therefore, a new isospectral problem is designed. By making use of Tu's scheme, a new integrable system is obtained, which possesses bi-Hamiltonian structure. As its reductions,a formalism similar to the well-known Ablowitz-Kaup-Newell-Segur (AKNS) hierarchy and a generalized standard form of the Schrodinger equation are presented. In addition, in order for a kind of expanding integrable system to be obtained, a proper algebraic transformation is supplied to change loop algebra A2 into loop algebra A1. Furthermore,a high-dimensional loop algebra is constructed, which is different from any previous one. An integrable coupling of the system obtained is given. Finally, the Hamiltonian form of a binary symmetric constrained flow of the system obtained is presented.

  13. All-Optical WDM Buffer System Realized by NOLM and Feedback Loop Structure

    Institute of Scientific and Technical Information of China (English)

    Seungwoo Yi; Kyeong-Mo Yoon; Yong-Gi Lee; Jinseob Eom

    2003-01-01

    We propose an all-optical WDM buffer for optical packet switching system, which consists of NOLM and feedback loop. The proposed structure provides more than 40 turn buffering and nice output of buffered data when selected by control signal.

  14. Youth Advisors Driving Action: hearing the youth voice in mental health systems of care.

    Science.gov (United States)

    Davis-Brown, Karen; Carter, Naeemah; Miller, Bethany D

    2012-03-01

    The Children's Mental Health Initiative (CMHI) is funded by the Center for Mental Health Services within the Substance Abuse and Mental Health Services Administration. CMHI assists communities in developing comprehensive, coordinated services for children with serious emotional disturbances and their families. Broadly speaking, these systems are designed to be child centered, youth guided, family driven, community based, and culturally competent. To assure implementation of the "youth-guided" core value in the national evaluation, an advisory group of youth coordinator/youth teams representing communities across the country was developed. This group chose the name YADA-Youth Advisors Driving Action. YADA has made a substantive contribution to national evaluation efforts by bringing the youth perspective and voice to its audience at the community and national levels. This article describes YADA's founding and development, as well as related implications for psychosocial nurses.

  15. Decision support system in an international-voice-services business company

    Science.gov (United States)

    Hadianti, R.; Uttunggadewa, S.; Syamsuddin, M.; Soewono, E.

    2017-01-01

    We consider a problem facing by an international telecommunication services company in maximizing its profit. From voice services by controlling cost and business partnership. The competitiveness in this industry is very high, so that any efficiency from controlling cost and business partnership can help the company to survive in the very high competitiveness situation. The company trades voice traffic with a large number of business partners. There are four trading schemes that can be chosen by this company, namely, flat rate, class tiering, volume commitment, and revenue capped. Each scheme has a specific characteristic on the rate and volume deal, where the last three schemes are regarded as strategic schemes to be offered to business partner to ensure incoming traffic volume for both parties. This company and each business partner need to choose an optimal agreement in a certain period of time that can maximize the company’s profit. In this agreement, both parties agree to use a certain trading scheme, rate and rate/volume/revenue deal. A decision support system is then needed in order to give a comprehensive information to the sales officers to deal with the business partners. This paper discusses the mathematical model of the optimal decision for incoming traffic volume control, which is a part of the analysis needed to build the decision support system. The mathematical model is built by first performing data analysis to see how elastic the incoming traffic volume is. As the level of elasticity is obtained, we then derive a mathematical modelling that can simulate the impact of any decision on trading to the revenue of the company. The optimal decision can be obtained from these simulations results. To evaluate the performance of the proposed method we implement our decision model to the historical data. A software tool incorporating our methodology is currently in construction.

  16. Replication of Electric Aircraft Powertrain Dynamics and Inner-Loop Control for V&V of System Health Management Routines

    Data.gov (United States)

    National Aeronautics and Space Administration — Software-in-the-loop and hardware-in-the-loop testing of failure prognostics and decision making tools for aircraft systems will facilitate more comprehensive and...

  17. Klystron 'efficiency loop' for the ALS storage ring RF system

    Energy Technology Data Exchange (ETDEWEB)

    Kwiatkowski, Slawomir; Julian, Jim; Baptiste, Kenneth

    2002-05-20

    The recent energy crisis in California has led us to investigate the high power RF systems at the Advanced Light Source (ALS) in order to decrease the energy consumption and power costs. We found the Storage Ring Klystron Power Amplifier system operating as designed but with significant power waste. A simple proportional-integrator (PI) analog loop, which controls the klystron collector beam current, as a function of the output RF power, has been designed and installed. The design considerations, besides efficiency improvement, were to interface to the existing system without major expense. They were to also avoid the klystron cathode power supply filter's resonance in the loop's dynamics, and prevent a conflict with the existing Cavity RF Amplitude Loop dynamics. This efficiency loop will allow us to save up to 700 MW-hours of electrical energy per year and increase the lifetime of the klystron.

  18. Design and implementation of Smart Voice system%Smart Voice系统的设计与实现

    Institute of Scientific and Technical Information of China (English)

    徐俊芳; 田素贞

    2012-01-01

    Aiming at the problem that the current speech synthesis systems has strong taste of speech machine and poor voice quality, Smart Voice, a kind of Chinese TTS system was designed, and the Smart Voice call implementation was given. The system used a hierarchical, modular program structure, completing the marker analysis, syntax analysis, sustain treatment, tone sandhi processing function. Especially in the sustain processor,waveform concatenation technology innovation was used,creating waveform internal circulation damper module to make a good degree of natural sustain. System operation results showed that Smart Voice sounded natural,and could provide high-speed flexible Chinese speech for the network,games and other computer applications.%针对目前我国语音合成系统合成的语音机器味较浓、语音质量较差的问题,设计和实现了一种中文TTS软件系统Smart Voice,并给出了Smart Voice的调用实现.该系统使用层次化、模块化的程序结构,完成了标记分析、语法分析、延音处理、变调处理等功能.尤其在延音处理器中,创新地采用波形拼接技术创制了波形内部循环的延音模块,使得声音在延音时具有很好的自然度.系统运行表明,Smart Voice发音自然,能为网络、游戏等各种计算机应用提供高速灵活的中文语音支持.

  19. Preliminary design of a small air loop for system analysis and validation of Cathare code

    Energy Technology Data Exchange (ETDEWEB)

    Marchand, M.; Saez, M.; Tauveron, N.; Tenchine, D.; Germain, T.; Geffraye, G.; Ruby, G.P. [CEA Grenoble (DEN/DER/SSTH), 38 (France)

    2007-07-01

    The French Atomic Energy Commission (Cea) is carrying on the design of a Small Air Loop for System Analysis (SALSA), devoted to the study of gas cooled nuclear reactors behaviour in normal and incidental/accidental operating conditions. The reduced size of the SALSA components compared to a full-scale reactor and air as gaseous coolant instead of Helium will allow an easy management of the loop. The main purpose of SALSA will be the validation of the associated thermal hydraulic safety simulation codes, like CATHARE. The main goal of this paper is to present the methodology used to define the characteristics of the loop. In a first step, the study has been focused on a direct-cycle system for the SALSA loop with few global constraints using a similarity analysis to support the definition and design of the loop. Similarity requirements have been evaluated to determine the scale factors which have to be applied to the SALSA loop components. The preliminary conceptual design of the SALSA plant with a definition of each component has then be carried out. The whole plant has been modelled using the CATHARE code. Calculations of the SALSA steady-state in nominal conditions and of different plant transients in direct-cycle have been made. The first system results obtained on the global behaviour of the loop confirm that SALSA can be representative of a Gas-Cooled nuclear reactor with some minor design modifications. In a second step, the current prospects focus on the SALSA loop capability to reproduce correctly the heat transfer occurring in specific incidental situations. Heat decay removal by natural convection is a crucial point of interest. The first results show that the behaviour and the efficiency of the loop are strongly influenced by the definition of the main parameters for each component. A complete definition of SALSA is under progress. (authors)

  20. Measuring the magnetic field of a trans-equatorial loop system using coronal seismology

    Science.gov (United States)

    Long, David; Perez-Suarez, David; Valori, Gherardo

    2016-05-01

    First observed by SOHO/EIT, "EIT waves" are strongly associated with the initial evolution of coronal mass ejections (CMEs) and after almost 20 years of investigation a consensus is being reached which interprets them as freely-propagating waves produced by the rapid expansion of a CME in the low corona. An "EIT wave" was observed on 6 July 2012 to erupt from active region AR11514 into a particularly structured corona that included multiple adjacent active regions as well as an adjacent trans-equatorial loop system anchored at the boundary of a nearby coronal hole. The eruption was well observed by SDO/AIA and CoMP, allowing the effects of the "EIT wave" on the trans-equatorial loop system to be studied in detail. In particular, it was possible to characterise the oscillation of the loop system using Doppler velocity measurements from CoMP. These Doppler measurements were used to estimate the magnetic field strength of the trans-equatorial loop system via coronal seismology. It was then possible to compare these inferred magnetic field values with extrapolated magnetic field values derived using a Potential Field Source Surface extrapolation as well as the direct measurements of magnetic field provided by CoMP. These results show that the magnetic field strength of loop systems in the solar corona may be estimated using loop seismology.

  1. Performance Evaluation of Uplink Closed Loop Power Control for LTE System

    DEFF Research Database (Denmark)

    Bilal, Muhammad; Mohamed, Abbas

    Uplink power control is a key radio resource management feature in the 3GPP Long Term Evolution (LTE). In order to adapt to changes in the inter-cell interference situation or to correct power amplifier errors, closed-loop adjustments should be applied. In this paper the performance of closed loop...... power control combined with fractional path loss compensation factor is studied, and an optimal value for the path loss compensation factor is investigated. The closed loop power control with fractional path loss compensation factor is found to improve the system performance in terms of mean bit rate...... by 68% and utilizes the battery power more effectively....

  2. Competition between shock and turbulent heating in coronal loop system

    Science.gov (United States)

    Matsumoto, Takuma

    2016-11-01

    2.5-dimensional magnetohydrodynamic (MHD) simulations are performed with high spatial resolution in order to distinguish between competing models of the coronal heating problem. A single coronal loop powered by Alfvén waves excited in the photosphere is the target of this study. The coronal structure is reproduced in our simulations as a natural consequence of the transportation and dissipation of Alfvén waves. Further, the coronal structure is maintained as the spatial resolution is changed from 25 to 3 km, although the temperature at the loop top increases with the spatial resolution. The heating mechanisms change gradually across the magnetic canopy at a height of 4 Mm. Below the magnetic canopy, both the shock and the MHD turbulence are dominant heating processes. Above the magnetic canopy, the shock heating rate reduces to less than 10 per cent of the total heating rate while the MHD turbulence provides significant energy to balance the radiative cooling and thermal conduction loss or gain. The importance of compressibility shown in this study would significantly impact on the prospects of successful MHD turbulence theory in the solar chromosphere.

  3. Competition between shock and turbulent heating in coronal loop system

    CERN Document Server

    Matsumoto, Takuma

    2016-01-01

    2.5-dimensional magnetohydrodynamic (MHD) simulations are performed with high spatial resolution in order to distinguish between competing models of the coronal heating problem. A single coronal loop powered by Alfv\\'{e}n waves excited in the photosphere is the target of the present study. The coronal structure is reproduced in our simulations as a natural consequence of the transportation and dissipation of Alfv\\'{e}n waves. Further, the coronal structure is maintained as the spatial resolution is changed from 25 to 3 km, although the temperature at the loop top increases with the spatial resolution. The heating mechanisms change gradually across the magnetic canopy at a height of 4 Mm. Below the magnetic canopy, both the shock and the MHD turbulence are dominant heating processes. Above the magnetic canopy, the shock heating rate reduces to less than 10 % of the total heating rate while the MHD turbulence provides significant energy to balance the radiative cooling and thermal conduction loss or gain. The i...

  4. Optimal pipe size design for looped irrigation water supply system using harmony search: Saemangeum project area.

    Science.gov (United States)

    Yoo, Do Guen; Lee, Ho Min; Sadollah, Ali; Kim, Joong Hoon

    2015-01-01

    Water supply systems are mainly classified into branched and looped network systems. The main difference between these two systems is that, in a branched network system, the flow within each pipe is a known value, whereas in a looped network system, the flow in each pipe is considered an unknown value. Therefore, an analysis of a looped network system is a more complex task. This study aims to develop a technique for estimating the optimal pipe diameter for a looped agricultural irrigation water supply system using a harmony search algorithm, which is an optimization technique. This study mainly serves two purposes. The first is to develop an algorithm and a program for estimating a cost-effective pipe diameter for agricultural irrigation water supply systems using optimization techniques. The second is to validate the developed program by applying the proposed optimized cost-effective pipe diameter to an actual study region (Saemangeum project area, zone 6). The results suggest that the optimal design program, which applies an optimization theory and enhances user convenience, can be effectively applied for the real systems of a looped agricultural irrigation water supply.

  5. Optimal Pipe Size Design for Looped Irrigation Water Supply System Using Harmony Search: Saemangeum Project Area

    Directory of Open Access Journals (Sweden)

    Do Guen Yoo

    2015-01-01

    Full Text Available Water supply systems are mainly classified into branched and looped network systems. The main difference between these two systems is that, in a branched network system, the flow within each pipe is a known value, whereas in a looped network system, the flow in each pipe is considered an unknown value. Therefore, an analysis of a looped network system is a more complex task. This study aims to develop a technique for estimating the optimal pipe diameter for a looped agricultural irrigation water supply system using a harmony search algorithm, which is an optimization technique. This study mainly serves two purposes. The first is to develop an algorithm and a program for estimating a cost-effective pipe diameter for agricultural irrigation water supply systems using optimization techniques. The second is to validate the developed program by applying the proposed optimized cost-effective pipe diameter to an actual study region (Saemangeum project area, zone 6. The results suggest that the optimal design program, which applies an optimization theory and enhances user convenience, can be effectively applied for the real systems of a looped agricultural irrigation water supply.

  6. A Systemic Functional Approach to the Passive Voice in English into Spanish Translation: Thematic Development in a Medical Research Article

    Directory of Open Access Journals (Sweden)

    Rodríguez-Vergara Daniel

    2017-01-01

    Full Text Available The purpose of this study was to explore, from the perspective of Systemic Functional Grammar, how passive clauses in a medical research article were translated into Spanish, specifically if they were kept in the passive voice, were changed into the active voice, or were turned into some other structure, and if voice change in the translated version affected the original thematic development. The medical paper chosen for this study was originally written in English and published in an Anglophone journal; it was then translated into Spanish and published in a Mexican journal. Both the original and the translated article were analyzed in terms of Theme and Rheme; all of the instances of passive and active voice were quantified and compared. The results show that in some cases the original thematic patterns were modified in the translation due to the use of the reflexive passive in Spanish, which results in the fronting of the verb in the sentences, thereby causing a change of Themes in the paragraphs with respect to the original structure. This study contributes to our understanding of the function of passive constructions in English and Spanish and its relationship with thematic progression.

  7. Boost converter with combined control loop for a stand-alone photovoltaic battery charge system

    DEFF Research Database (Denmark)

    Mira Albert, Maria del Carmen; Knott, Arnold; Thomsen, Ole Cornelius

    2013-01-01

    The converter control scheme plays an important role in the performance of maximum power point tracking (MPPT) algorithms. In this paper, an input voltage control with double loop for a stand-alone photovoltaic system is designed and tested. The inner current control loop with high crossover...... is linearized at the maximum power point (MPP) and at the voltage and current source regions. A settling time under 1 ms is obtained which allows fast MPP tracking implementation....

  8. Closed and Open Loop Subspace System Identification of the Kalman Filter

    Directory of Open Access Journals (Sweden)

    David Di Ruscio

    2009-04-01

    Full Text Available Some methods for consistent closed loop subspace system identification presented in the literature are analyzed and compared to a recently published subspace algorithm for both open as well as for closed loop data, the DSR_e algorithm. Some new variants of this algorithm are presented and discussed. Simulation experiments are included in order to illustrate if the algorithms are variance efficient or not.

  9. Boost converter with combined control loop for a stand-alone photovoltaic battery charge system

    OpenAIRE

    Mira Albert, Maria del Carmen; Knott, Arnold; Thomsen, Ole Cornelius; Andersen, Michael A. E.

    2013-01-01

    The converter control scheme plays an important role in the performance of maximum power point tracking (MPPT) algorithms. In this paper, an input voltage control with double loop for a stand-alone photovoltaic system is designed and tested. The inner current control loop with high crossover frequency avoids perturbations in the load being propagated to the photovoltaic panel and thus deviating the operating point. Linearization of the photovoltaic panel and converter state-space modeling is ...

  10. Poisoned Feedback: The Impact of Malicious Users in Closed-Loop Multiuser MIMO Systems

    CERN Document Server

    Mukherjee, Amitav

    2010-01-01

    Accurate channel state information (CSI) at the transmitter is critical for maximizing spectral efficiency on the downlink of multi-antenna networks. In this work we analyze a novel form of physical layer attacks on such closed-loop wireless networks. Specifically, this paper considers the impact of deliberately inaccurate feedback by malicious users in a multiuser multicast system. Numerical results demonstrate the significant degradation in performance of closed-loop transmission schemes due to intentional feedback of false CSI by adversarial users.

  11. Simulation of Open-loop Plasma Vertical Movement Response in Damavand Tokamak Using Closed-loop Subspace System Identification

    CERN Document Server

    Farahania, N Darestani

    2015-01-01

    A formulation of a multi-input single-output closed-loop subspace system identification method is employed for the purpose of obtaining control-relevant model of the vacuum-plasma response in Damavand tokamak. Such a model is particularly well suited for robust controller design. The accuracy of the estimate of the plant dynamics is estimated by different experiments. The method described in this paper is a worst-case identification technique, in that it aims to minimize the error between the identified model and the true plant. The identified model fitness around defined operating point is more than 90% and with comparison by physical-based model it has better root mean square measure of the goodness of the fit.

  12. Model-Driven Safety Analysis of Closed-Loop Medical Systems.

    Science.gov (United States)

    Pajic, Miroslav; Mangharam, Rahul; Sokolsky, Oleg; Arney, David; Goldman, Julian; Lee, Insup

    2012-10-26

    In modern hospitals, patients are treated using a wide array of medical devices that are increasingly interacting with each other over the network, thus offering a perfect example of a cyber-physical system. We study the safety of a medical device system for the physiologic closed-loop control of drug infusion. The main contribution of the paper is the verification approach for the safety properties of closed-loop medical device systems. We demonstrate, using a case study, that the approach can be applied to a system of clinical importance. Our method combines simulation-based analysis of a detailed model of the system that contains continuous patient dynamics with model checking of a more abstract timed automata model. We show that the relationship between the two models preserves the crucial aspect of the timing behavior that ensures the conservativeness of the safety analysis. We also describe system design that can provide open-loop safety under network failure.

  13. A review of control strategies in closed-loop neuroprosthetic systems

    Directory of Open Access Journals (Sweden)

    James Wright

    2016-07-01

    Full Text Available It has been widely recognized that closed-loop neuroprosthetic systems achieve more favorable outcomes for users then equivalent open-loop devices. Improved performance of tasks, better usability and greater embodiment have all been reported in systems utilizing some form of feedback. However the interdisciplinary work on neuroprosthetic systems can lead to miscommunication due to similarities in well established nomenclature in different fields. Here we present a review of control strategies in existing experimental, investigational and clinical neuroprosthetic systems in order to establish a baseline and promote a common understanding of different feedback modes and closed-loop controllers. The first section provides a brief discussion of feedback control and control theory. The second section reviews the control strategies of recent Brain Machine Interfaces, neuromodulatory implants, neuroprosthetic systems and assistive neurorobotic devices. The final section examines the different approaches to feedback in current neuroprosthetic and neurorobotic systems.

  14. Voltage Regulation and Line Loss Minimization of Loop Distribution Systems Using UPFC

    Science.gov (United States)

    Sayed, Mahmoud A.; Takeshita, Takaharu

    This paper presents a new method for achieving line loss minimization and voltage regulation in the loop distribution systems, simultaneously. First, mathematical analysis of the line loss minimum conditions in the loop distribution systems is presented. Then, load voltage regulation is applied in the loop distribution system under line loss minimum condition. Reference angle of the desired load voltage is the main factor that can be used to minimize total line loss during load voltage control. In order to achieve these two objectives simultaneously, the UPFC (unified power flow controller), a typical FACTS (flexible AC transmission systems) device, that is capable of instantaneous control of transmission and distribution power flow, is used. Also, the UPFC control scheme to regulate the load voltage under line loss minimization is presented. The effectiveness of the proposed control scheme has been verified experimentally using laboratory prototype in a 200V, 6kVA system.

  15. Closed-loop liquid-vapor equilibrium in a one-component system.

    Science.gov (United States)

    Almarza, N G

    2012-09-01

    We report Monte Carlo simulations that show a closed-loop liquid-vapor equilibrium in a pure substance. This finding has been achieved on a two-dimensional lattice model for patchy particles that can form network fluids. We have considered related models with a slightly different patch distribution in order to understand the features of the distribution of patches on the surface of the particles that make possible the presence of the closed-loop liquid-vapor equilibrium, and its relation to the phase diagram containing so-called empty liquids. Finally we discuss the likelihood of finding the closed-loop liquid-vapor equilibria on related models for three-dimensional models of patchy particles in the continuum, and speculate on the possible relationship between the mechanism behind the closed-loop liquid-vapor equilibrium of our simple lattice model and the salt-induced reentrant condensation found in complex systems.

  16. Implementation of a vector-based tracking loop receiver in a pseudolite navigation system.

    Science.gov (United States)

    So, Hyoungmin; Lee, Taikjin; Jeon, Sanghoon; Kim, Chongwon; Kee, Changdon; Kim, Taehee; Lee, Sanguk

    2010-01-01

    We propose a vector tracking loop (VTL) algorithm for an asynchronous pseudolite navigation system. It was implemented in a software receiver and experiments in an indoor navigation system were conducted. Test results show that the VTL successfully tracks signals against the near-far problem, one of the major limitations in pseudolite navigation systems, and could improve positioning availability by extending pseudolite navigation coverage.

  17. ORION Environmental Control and Life Support Systems Suit Loop and Pressure Control Analysis

    Science.gov (United States)

    Eckhardt, Brad; Conger, Bruce; Stambaugh, Imelda C.

    2015-01-01

    Under NASA's ORION Multi-Purpose Crew Vehicle (MPCV) Environmental Control and Life Support System (ECLSS) Project at Johnson Space Center's (JSC), the Crew and Thermal Systems Division has developed performance models of the air system using Thermal Desktop/FloCAD. The Thermal Desktop model includes an Air Revitalization System (ARS Loop), a Suit Loop, a Cabin Loop, and Pressure Control System (PCS) for supplying make-up gas (N2 and O2) to the Cabin and Suit Loop. The ARS and PCS are designed to maintain air quality at acceptable O2, CO2 and humidity levels as well as internal pressures in the vehicle Cabin and during suited operations. This effort required development of a suite of Thermal Desktop Orion ECLSS models to address the need for various simulation capabilities regarding ECLSS performance. An initial highly detailed model of the ARS Loop was developed in order to simulate rapid pressure transients (water hammer effects) within the ARS Loop caused by events such as cycling of the Pressurized Swing Adsorption (PSA) Beds and required high temporal resolution (small time steps) in the model during simulation. A second ECLSS model was developed to simulate events which occur over longer periods of time (over 30 minutes) where O2, CO2 and humidity levels, as well as internal pressures needed to be monitored in the cabin and for suited operations. Stand-alone models of the PCS and the Negative Pressure relief Valve (NPRV) were developed to study thermal effects within the PCS during emergency scenarios (Cabin Leak) and cabin pressurization during vehicle re-entry into Earth's atmosphere. Results from the Orion ECLSS models were used during Orion Delta-PDR (July, 2014) to address Key Design Requirements (KDR's) for Suit Loop operations for multiple mission scenarios.

  18. Sensory Processing: Advances in Understanding Structure and Function of Pitch-Shifted Auditory Feedback in Voice Control

    Directory of Open Access Journals (Sweden)

    Charles R Larson

    2016-02-01

    Full Text Available The pitch-shift paradigm has become a widely used method for studying the role of voice pitch auditory feedback in voice control. This paradigm introduces small, brief pitch shifts in voice auditory feedback to vocalizing subjects. The perturbations trigger a reflexive mechanism that counteracts the change in pitch. The underlying mechanisms of the vocal responses are thought to reflect a negative feedback control system that is similar to constructs developed to explain other forms of motor control. Another use of this technique requires subjects to voluntarily change the pitch of their voice when they hear a pitch shift stimulus. Under these conditions, short latency responses are produced that change voice pitch to match that of the stimulus. The pitch-shift technique has been used with magnetoencephalography (MEG and electroencephalography (EEG recordings, and has shown that at vocal onset there is normally a suppression of neural activity related to vocalization. However, if a pitch-shift is also presented at voice onset, there is a cancellation of this suppression, which has been interpreted to mean that one way in which a person distinguishes self-vocalization from vocalization of others is by a comparison of the intended voice and the actual voice. Studies of the pitch shift reflex in the fMRI environment show that the superior temporal gyrus (STG plays an important role in the process of controlling voice F0 based on auditory feedback. Additional studies using fMRI for effective connectivity modeling show that the left and right STG play critical roles in correcting for an error in voice production. While both the left and right STG are involved in this process, a feedback loop develops between left and right STG during perturbations, in which the left to right connection becomes stronger, and a new negative right to left connection emerges along with the emergence of other feedback loops within the cortical network tested.

  19. Measuring the magnetic field of a trans-equatorial loop system using coronal seismology

    Science.gov (United States)

    Long, D. M.; Valori, G.; Pérez-Suárez, D.; Morton, R. J.; Vásquez, A. M.

    2017-07-01

    Context. EIT waves are freely-propagating global pulses in the low corona which are strongly associated with the initial evolution of coronal mass ejections (CMEs). They are thought to be large-amplitude, fast-mode magnetohydrodynamic waves initially driven by the rapid expansion of a CME in the low corona. Aims: An EIT wave was observed on 6 July 2012 to impact an adjacent trans-equatorial loop system which then exhibited a decaying oscillation as it returned to rest. Observations of the loop oscillations were used to estimate the magnetic field strength of the loop system by studying the decaying oscillation of the loop, measuring the propagation of ubiquitous transverse waves in the loop and extrapolating the magnetic field from observed magnetograms. Methods: Observations from the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory (SDO/AIA) and the Coronal Multi-channel Polarimeter (CoMP) were used to study the event. An Empirical Mode Decomposition analysis was used to characterise the oscillation of the loop system in CoMP Doppler velocity and line width and in AIA intensity. Results: The loop system was shown to oscillate in the 2nd harmonic mode rather than at the fundamental frequency, with the seismological analysis returning an estimated magnetic field strength of ≈ 5.5 ± 1.5 G. This compares to the magnetic field strength estimates of ≈1-9 G and ≈3-9 G found using the measurements of transverse wave propagation and magnetic field extrapolation respectively. A movie associated to Figs. 1 and 2 is available at http://www.aanda.org

  20. Application of AI techniques to a voice-actuated computer system for reconstructing and displaying magnetic resonance imaging data

    Science.gov (United States)

    Sherley, Patrick L.; Pujol, Alfonso, Jr.; Meadow, John S.

    1990-07-01

    To provide a means of rendering complex computer architectures languages and input/output modalities transparent to experienced and inexperienced users research is being conducted to develop a voice driven/voice response computer graphics imaging system. The system will be used for reconstructing and displaying computed tomography and magnetic resonance imaging scan data. In conjunction with this study an artificial intelligence (Al) control strategy was developed to interface the voice components and support software to the computer graphics functions implemented on the Sun Microsystems 4/280 color graphics workstation. Based on generated text and converted renditions of verbal utterances by the user the Al control strategy determines the user''s intent and develops and validates a plan. The program type and parameters within the plan are used as input to the graphics system for reconstructing and displaying medical image data corresponding to that perceived intent. If the plan is not valid the control strategy queries the user for additional information. The control strategy operates in a conversation mode and vocally provides system status reports. A detailed examination of the various AT techniques is presented with major emphasis being placed on their specific roles within the total control strategy structure. 1.

  1. Voice Activity Detector of Wake-Up-Word Speech Recognition System Design on FPGA

    Directory of Open Access Journals (Sweden)

    Veton Z. Këpuska

    2014-12-01

    Full Text Available A typical speech recognition system is push-to-talk operated that requires activation. However for those who use hands-busy applications, movement may by restricted or impossible. One alternative is to use Speech-Only Interface. The proposed method that is called Wake-Up-Word Speech Recognition (WUW-SR that utilizes speech only interface. A WUW-SR system would allow the user to activate systems (Cell phone, Computer, etc. with only speech commands instead of manual activation. The trend in WUW-SR hardware design is towards implementing a complete system on a single chip intended for various applications. This paper presents an experimental FPGA design and implementation of a novel architecture of a real time feature extraction processor that includes: Voice Activity Detector (VAD, and features extraction, MFCC, LPC, and ENH_MFCC. In the WUW-SR system, the recognizer front-end with VAD is located at the terminal which is typically connected over a data network(e.g., serverfor remote back-end recognition. VAD is responsible for segmenting the signal into speech-like and non-speech-like segments. For any given frame VAD reports one of two possible states: VAD_ON or VAD_OFF. The back-end is then responsible to score the features that are being segmented during VAD_ON stage. The most important characteristic of the presented design is that it should guarantee virtually 100% correct rejection for non-WUW (out of vocabulary words - OOV while maintaining correct acceptance rate of 99.9% or higher (in vocabulary words - INV. This requirement sets apart WUW-SR from other speech recognition tasks because no existing system can guarantee 100% reliability by any measure.

  2. Adaptive Sliding Mode Control of Dynamic Systems Using Double Loop Recurrent Neural Network Structure.

    Science.gov (United States)

    Fei, Juntao; Lu, Cheng

    2017-03-06

    In this paper, an adaptive sliding mode control system using a double loop recurrent neural network (DLRNN) structure is proposed for a class of nonlinear dynamic systems. A new three-layer RNN is proposed to approximate unknown dynamics with two different kinds of feedback loops where the firing weights and output signal calculated in the last step are stored and used as the feedback signals in each feedback loop. Since the new structure has combined the advantages of internal feedback NN and external feedback NN, it can acquire the internal state information while the output signal is also captured, thus the new designed DLRNN can achieve better approximation performance compared with the regular NNs without feedback loops or the regular RNNs with a single feedback loop. The new proposed DLRNN structure is employed in an equivalent controller to approximate the unknown nonlinear system dynamics, and the parameters of the DLRNN are updated online by adaptive laws to get favorable approximation performance. To investigate the effectiveness of the proposed controller, the designed adaptive sliding mode controller with the DLRNN is applied to a z-axis microelectromechanical system gyroscope to control the vibrating dynamics of the proof mass. Simulation results demonstrate that the proposed methodology can achieve good tracking property, and the comparisons of the approximation performance between radial basis function NN, RNN, and DLRNN show that the DLRNN can accurately estimate the unknown dynamics with a fast speed while the internal states of DLRNN are more stable.

  3. Optimization Strategies Oriented to Loop Characteristics in Software Thread Level Speculation Systems

    Institute of Scientific and Technical Information of China (English)

    Li Shen; Fan Xu; Zhi-Ying Wang

    2016-01-01

    Thread level speculation provides not only a simple parallel programming model, but also an effective mech-anism for thread-level parallelism exploitation. The performance of software speculative parallel models is limited by high global overheads caused by different types of loops. These loops usually have different characteristics of dependencies and different requirements of optimization strategies. In this paper, we propose three comprehensive optimization techniques to reduce different factors of global overheads, aiming at requirements from different types of loops. Inter-thread fetching can reduce the high mis-speculation rate of the loops with frequent dependencies and out-of-order committing can reduce the control overhead of the loops with infrequent dependencies, while enhanced dynamic task granularity resizing can reduce the control overhead and optimize the global overhead of the loops with changing characteristics of dependencies. All these three optimization techniques have been implemented in HEUSPEC, a software TLS system. Experimental results indicate that they can satisfy the demands from different groups of benchmarks. The combination of these techniques can improve the performance of all benchmarks and reach a higher average speedup.

  4. A design method for closed loop solar energy systems with concentrating collectors

    Science.gov (United States)

    Ryan, W. A.

    1982-01-01

    A method of performance prediction and design for closed loop concentrating solar collector systems is presented, along with a comparison of prediction with results using a compound parabolic concentrating collector. The numerical model is an extension of Collares-Pereira and Rabl (1978) model for concentrating collectors to a closed-loop scenario, using a monthly average utilizability factor and the f-chart technique. The predictions were compared with simulations using the TRNSYS program, considering 1.5, 3.0, and 5.0 concentration factors, and a sensible heat storage system. Performance predictions were found to depart from the simulations by an average of 14.04% for all cases, with the predictions giving consistently lower results. The method is concluded to be useful for optimizing collector areas and concentration ratios in closed-loop systems.

  5. Realizations of BELS as WIV method in both direct and indirect closed-loop system identification

    Institute of Scientific and Technical Information of China (English)

    JIA LiJuan; TAO Ran; WANG Yue; WADA Kiyoshi

    2009-01-01

    The bias eliminated least squares (BELS) method, which Is known as efficient for unknown parameter estimation of transfer function In the correlated noise case, has been developed and applied effectively to the closed-loop system identification. In this paper, under the general settings, the realizations of the BELS method as a weighted instrumental variables (WIV) method in both direct and indirect closed-loop system identification are established through constructing an appropriate weighting matrix in the WIV method. The constructed structures are similar in both cases, which reveals that all the proof procedures of the two realizations are the same. Thus, the unified realizations of the BELS as the WIV method for the closed-loop system identification can be built. A simulation example Is given to validate our theoretical analysis.

  6. A self-teaching image processing and voice-recognition-based, intelligent and interactive system to educate visually impaired children

    Science.gov (United States)

    Iqbal, Asim; Farooq, Umar; Mahmood, Hassan; Asad, Muhammad Usman; Khan, Akrama; Atiq, Hafiz Muhammad

    2010-02-01

    A self teaching image processing and voice recognition based system is developed to educate visually impaired children, chiefly in their primary education. System comprises of a computer, a vision camera, an ear speaker and a microphone. Camera, attached with the computer system is mounted on the ceiling opposite (on the required angle) to the desk on which the book is placed. Sample images and voices in the form of instructions and commands of English, Urdu alphabets, Numeric Digits, Operators and Shapes are already stored in the database. A blind child first reads the embossed character (object) with the help of fingers than he speaks the answer, name of the character, shape etc into the microphone. With the voice command of a blind child received by the microphone, image is taken by the camera which is processed by MATLAB® program developed with the help of Image Acquisition and Image processing toolbox and generates a response or required set of instructions to child via ear speaker, resulting in self education of a visually impaired child. Speech recognition program is also developed in MATLAB® with the help of Data Acquisition and Signal Processing toolbox which records and process the command of the blind child.

  7. Function Projective Synchronization of Fractional-Order Hyperchaotic System Based on Open-Plus-Closed-Looping

    Institute of Scientific and Technical Information of China (English)

    WANG Xing-Yuan; LIU Rong; ZHANG Na

    2011-01-01

    The purpose of this paper is to analyze the dynamic behavior of fractional-order four-order hyperchaotic Lii system, and use the Open-Plus-Closed-Looping (OPCL) coupling method to construct the system's corresponding response system, and then implement function projective synchronization (FPS) of fractional-order drive-response system with system parameters perturbation or not. Finally, the numerical simulations verify the effectiveness and robustness of this scheme.

  8. Multiple Description Coding for Closed Loop Systems over Erasure Channels

    DEFF Research Database (Denmark)

    Østergaard, Jan; Quevedo, Daniel

    2013-01-01

    ) and the decoder (plant). The feedback channel from the decoder to the encoder is assumed noiseless. Since the forward channel is digital, we need to employ quantization.We combine two techniques to enhance the reliability of the system. First, in order to guarantee that the system remains stable during packet...... by showing that the system can be cast as a Markov jump linear system....

  9. On the evaluation of expected performance cost for partially observed closed-loop stochastic systems

    Science.gov (United States)

    Bayard, D. S.; Eslami, M.

    1985-01-01

    New methods are presented for evaluating the expected performance cost of partially observed closed-loop stochastic systems. When the variances of the process statistics are small, a linearized model of the closed-loop stochastic system is defined for which the expected cost can be evaluated by recursion on a set of purely deterministic difference equations. When the variances of the process statistics are large, the linearized model can be used in the control variate method of variance reduction for reducing the number of sample paths required for effective Monte Carlo estimation.

  10. Hanford Tank Farms Waste Feed Flow Loop Phase VI: PulseEcho System Performance Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Denslow, Kayte M.; Bontha, Jagannadha R.; Adkins, Harold E.; Jenks, Jeromy WJ; Hopkins, Derek F.

    2012-11-21

    This document presents the visual and ultrasonic PulseEcho critical velocity test results obtained from the System Performance test campaign that was completed in September 2012 with the Remote Sampler Demonstration (RSD)/Waste Feed Flow Loop cold-test platform located at the Monarch test facility in Pasco, Washington. This report is intended to complement and accompany the report that will be developed by WRPS on the design of the System Performance simulant matrix, the analysis of the slurry test sample concentration and particle size distribution (PSD) data, and the design and construction of the RSD/Waste Feed Flow Loop cold-test platform.

  11. Incremental Closed-loop Identification of Linear Parameter Varying Systems

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, Klaus

    2011-01-01

    This paper deals with system identification for control of linear parameter varying systems. In practical applications, it is often important to be able to identify small plant changes in an incremental manner without shutting down the system and/or disconnecting the controller; unfortunately, cl...

  12. RiverHeath: Neighborhood Loop Geothermal Exchange System

    Energy Technology Data Exchange (ETDEWEB)

    Geall, Mark [RiverHeath LLC, Appleton, WI (United States)

    2016-07-11

    The goal of the RiverHeath project is to develop a geothermal exchange system at lower capital infrastructure cost than current geothermal exchange systems. The RiverHeath system features an innovative design that incorporates use of the adjacent river through river-based heat exchange plates. The flowing water provides a tremendous amount of heat transfer. As a result, the installation cost of this geothermal exchange system is lower than more traditional vertical bore systems. Many urban areas are located along rivers and other waterways. RiverHeath will serve as a template for other projects adjacent to the water.

  13. Perturbation Measures of Voice: A Comparative Study between Multi-Dimensional Voice Program and Praat

    National Research Council Canada - National Science Library

    Maryn, Youri; Corthals, Paul; De Bodt, Marc; Van Cauwenberge, Paul; Deliyski, Dimitar

    2009-01-01

    .... In the present study, perturbation measures provided by two computer systems (a purpose-built professional voice analysis apparatus and a personal computer-based system for acoustic voice assessment...

  14. Insulin pump therapy in youth with type 1 diabetes: toward closed-loop systems.

    Science.gov (United States)

    Tauschmann, Martin; Hovorka, Roman

    2014-06-01

    Insulin pump technology has advanced considerably over the past three decades, leading to more favorable metabolic control and less hypoglycemic events when compared with multiple daily injection therapy. The use of insulin pumps is increasing, particularly in children and adolescents with type 1 diabetes. This review outlines recent developments in insulin pump therapy from a pediatric perspective. 'Smart' pumps, sensor-augmented pump therapy and threshold-suspend feature of insulin pumps are reviewed in terms of efficacy, safety and psychosocial impact. The current status of closed-loop systems focusing on clinical outcomes is highlighted. Closed-loop insulin delivery is gradually progressing from bench to the clinical practice. Longer and larger studies in home settings are needed to expand on short- to medium-term outpatient evaluations. Predictive low glucose management and overnight closed-loop delivery may be the next applications to be implemented in daily routine. Further challenges include improvements of control algorithms, sensor accuracy, duration of insulin action, integration and size of devices and connectivity and usability. Gradual improvements and increasing sophistication of closed-loop components lie on the path toward unsupervised hands-off fully closed-loop system.

  15. Vision Systems with the Human in the Loop

    Directory of Open Access Journals (Sweden)

    Bauckhage Christian

    2005-01-01

    Full Text Available The emerging cognitive vision paradigm deals with vision systems that apply machine learning and automatic reasoning in order to learn from what they perceive. Cognitive vision systems can rate the relevance and consistency of newly acquired knowledge, they can adapt to their environment and thus will exhibit high robustness. This contribution presents vision systems that aim at flexibility and robustness. One is tailored for content-based image retrieval, the others are cognitive vision systems that constitute prototypes of visual active memories which evaluate, gather, and integrate contextual knowledge for visual analysis. All three systems are designed to interact with human users. After we will have discussed adaptive content-based image retrieval and object and action recognition in an office environment, the issue of assessing cognitive systems will be raised. Experiences from psychologically evaluated human-machine interactions will be reported and the promising potential of psychologically-based usability experiments will be stressed.

  16. WIFI-based Telephone Voice Monitoring System%基于WIFI的电话语音监控系统

    Institute of Scientific and Technical Information of China (English)

    苏建志; 杨惠山

    2016-01-01

    设计一种新型的基于 WIFI无线的电话语音监控系统,该系统通过士兰微公司的主控芯片 SC6138对电话语音进行采集录音,利用 SD卡、U盘等存储媒介对电话语音信号进行储存,同时通过 WIFI 把储存的语音文件实时传输给远程监控端。首先设计该系统的硬件电路,并详细阐述各个功能模块的工作原理,然后设计主要工作模块的软件及其流程。结果表明,该系统可移动性强,不需要任何主机即可存储语音内容和通过 WIFI 实现远程监控。%The article designed a new wireless telephone voice monitoring system that is based on WIFI module.The sys-tem samples and records the telephone voice by use of main controlling chip SC6138 produced by SiLan Company.The tele-phone voice audio signal is saved as files in SD card and USB.At the same time the voice files stored is transferred live to the remote monitoring terminal through WIFI module when needed.First the hardware circuit of this system is designed and the working principle is elaborated on for each function module of the system.At last the software for the major operational mod-ules and their flow chart are designed.The testing results of the system find that it is of a high mobility and without a host ma-chine it can store voice and be remotely monitored via WIFI.

  17. Design approach of closed loop food systems in space

    NARCIS (Netherlands)

    Mas, J.L.; Vanrobaeys, X.; Hagenbeek, D.; Chaerle, L.; Straeten, D. van der; Kassel, R.; Janssen, E.G.O.N.; Hovland, S.

    2005-01-01

    Interest on food production systems based on the cultivation of vegetables for future planetary exploration missions is increasing as these units can help overcoming difficult and costly re-supply logistics. In addition to producing edible biomass by growing vegetable species, these systems can be

  18. Design approach of closed loop food systems in space

    NARCIS (Netherlands)

    Mas, J.L.; Vanrobaeys, X.; Hagenbeek, D.; Chaerle, L.; Straeten, D. van der; Kassel, R.; Janssen, E.G.O.N.; Hovland, S.

    2005-01-01

    Interest on food production systems based on the cultivation of vegetables for future planetary exploration missions is increasing as these units can help overcoming difficult and costly re-supply logistics. In addition to producing edible biomass by growing vegetable species, these systems can be u

  19. Design approach of closed loop food systems in space

    NARCIS (Netherlands)

    Mas, J.L.; Vanrobaeys, X.; Hagenbeek, D.; Chaerle, L.; Straeten, D. van der; Kassel, R.; Janssen, E.G.O.N.; Hovland, S.

    2005-01-01

    Interest on food production systems based on the cultivation of vegetables for future planetary exploration missions is increasing as these units can help overcoming difficult and costly re-supply logistics. In addition to producing edible biomass by growing vegetable species, these systems can be u

  20. Interconnection of subsystems in closed-loop systems

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Poulsen, Niels Kjølstad

    2009-01-01

    The focus in this paper is analysis of stability and controller design for interconnected systems. This includes both the case with known and unknown interconnected sub-system. The key element in both the stability analysis and controller design is the application of the Youla-Jabr-Bongiorno-Kuce...

  1. Simple PID parameter tuning method based on outputs of the closed loop system

    Science.gov (United States)

    Han, Jianda; Zhu, Zhiqiang; Jiang, Ziya; He, Yuqing

    2016-05-01

    Most of the existing PID parameters tuning methods are only effective with pre-known accurate system models, which often require some strict identification experiments and thus infeasible for many complicated systems. Actually, in most practical engineering applications, it is desirable for the PID tuning scheme to be directly based on the input-output response of the closed-loop system. Thus, a new parameter tuning scheme for PID controllers without explicit mathematical model is developed in this paper. The paper begins with a new frequency domain properties analysis of the PID controller. After that, the definition of characteristic frequency for the PID controller is given in order to study the mathematical relationship between the PID parameters and the open-loop frequency properties of the controlled system. Then, the concepts of M-field and θ-field are introduced, which are then used to explain how the PID control parameters influence the closed-loop frequency-magnitude property and its time responses. Subsequently, the new PID parameter tuning scheme, i.e., a group of tuning rules, is proposed based on the preceding analysis. Finally, both simulations and experiments are conducted, and the results verify the feasibility and validity of the proposed methods. This research proposes a PID parameter tuning method based on outputs of the closed loop system.

  2. Microprocessor Controller in Closed Loop Angular Position Servo System P.

    Directory of Open Access Journals (Sweden)

    P. B. Deshpande

    1989-07-01

    Full Text Available Integrated command, control and copmunication systems are based on the use of computers for digital data processing. The weapon system platforms like missile launchers are given input command for accurate and quick positioning in azimuth and elevation. The technologies of sensors, signal conditioning and associated solid state electronics have moved from analog to digital. Therefore, a position controller has to be designed around a microprocessor in embedded form for usage in such servo control systems. This paper highlights the basic approach for such design and problems which need to be tackled during actual implementation.

  3. The linear position tracking servo systemusing a linear voice-coil motor

    Institute of Scientific and Technical Information of China (English)

    褚立新; 林辉

    2008-01-01

    More and more linear servo systems have been used in servo applications. Direct drive technology can greatly increase the bandwidth and the tracking accuracy. A position servo-system based on linear voice-coil motor was designed for one linear oscillation movement application. Besides the conventional position, speed and current control loops, the speed and acceleration feed-forward control of command position signal were also used. The experimental test proved the correctness of the design, and the system ...

  4. Keeping Your Voice Healthy

    Science.gov (United States)

    ... Find an ENT Doctor Near You Keeping Your Voice Healthy Keeping Your Voice Healthy Patient Health Information ... heavily voice-related. Key Steps for Keeping Your Voice Healthy Drink plenty of water. Moisture is good ...

  5. Cyber-Physical Human Systems: Putting People in the Loop.

    Science.gov (United States)

    Sowe, Sulayman K; Zettsu, Koji; Simmon, Eric; de Vaulx, Frederic; Bojanova, Irena

    2016-01-01

    This article outlines the challenge to understand how to integrate people into a new generation of cyber-physical-human systems (CPHSs) and proposes a human service capability description model to help.

  6. A basic study on application of voice recognition input to an electronic nursing record system -evaluation of the function as an input interface-.

    Science.gov (United States)

    Marukami, Terutaka; Tani, Shoko; Matsuda, Atsuko; Takemoto, Keiko; Shindo, Akiko; Inada, Hiroshi

    2012-06-01

    As computerization in the nursing field has been recently progressing, an electronic nursing record system is gradually introduced in the medical institution in Japan. Although it is expected for the electronic nursing record system to reduce the load of nursing work, the conventional keyboard operation is used for information input of the present electronic nursing record system and it has some problems concerning the input time and the operationability for common nurses who are unfamiliar with the computer operation. In the present study, we conducted a basic study on application of voice recognition input to an electronic nursing record system. The voice input is recently introduced to an electronic medical record system in a few clinics. However, so far the entered information cannot be processed because the information of the medical record must be entered as a free sentence. Therefore, we contrived a template for an electronic nursing record system and introduced it to the system for simple information entry and easy processing of the entered information in this study. Furthermore, an input experiment for evaluation of the voice input with the template was carried out by voluntary subjects for evaluation of the function as an input interface of an electronic nursing record system. The results of the experiment revealed that the input time by the voice input is obviously fast compared with that by the keyboard input and operationability of the voice input was superior to the keyboard input although all subjects had inexperience of the voice input. As a result, it was suggested our method, the voice input using the template made by us, might be useful for an input interface of an electronic nursing record system.

  7. 读书机器人变声系统的研制%A Voice Modification System for Book Reading Robot

    Institute of Scientific and Technical Information of China (English)

    邓杰; 房宁; 赵群飞

    2012-01-01

    为了增加读书机器人(JoyTon)朗读声音的多样性,设计了一种基于单一语音库的声音变换系统.将读书机嚣TTS(textto speech)合成出的初始声音分解成声音激励信号和声道滤波嚣信号,并转换到频域进行修改.利用短时傅立叶幅度谱重构激励信号的方法以及通过修改声道滤波器参数的方法来变换音速、音调和音色.修改后的声音激励信号和声道滤波嚣信号被重新合成产生新的声音信号.该变声系统能在不增加语音库容量的情况下使读书机嚣人用丰富多彩的感情和声调朗读.%Voice modification based on single speech database is proposed in order to increase the voice diversity of the book reading robot (JoyTon). The original sounds synthesized by book reading robot's TTS engine are broken down into excitation and vocal tract filter. Both excitation and vocal tract filter are modified in the frequency domain. Excitation reconstruction through short-time Fourier transform magnitude and parameters modification of vocal tract filter are used to achieve tempo, pitch and timbre modification. Modified excitation and modified vocal tract filter are synthesized back to generate new voice signals. This voice modification system makes book reading robot a text with a variety of emotions and tones without extra memory for speech library.

  8. A Higher Dimensional Loop Algebra and Integrable Couplings System of Evolution Equations Hierarchy

    Institute of Scientific and Technical Information of China (English)

    夏铁成; 于发军; 陈登远

    2005-01-01

    An extension of the Lie algebra An-1 has been proposed [ Phys. Lett. A, 2003, 310 : 19-24 ]. In this paper, the new Lie algebra was used to construct a new higher dimensional loop algebra G~. Based on the loop algebra G~, the integrable couplings system of the NLS-MKdV equations hierarchy was obtained. As its reduction case, generalized nonlinear NLS-MKdV equations were obtained. The method proposed in this letter can be applied to other hierarchies of evolution equations.

  9. Development of a driver information and warning system with vehicle hardware-in-the-loop simulations

    NARCIS (Netherlands)

    Gietelink, O.J.; Ploeg, J.; Schutter, B. de; Verhaegen, M.

    2009-01-01

    This paper presents a new method for the design and validation of advanced driver assistance systems (ADASs). With vehicle hardware-in-the-loop (VeHIL) simulations the development process, and more specifically the validation phase, of intelligent vehicles is carried out safer, cheaper, and more man

  10. Open and Closed Loop Parametric System Identification in Compact Disk Players

    DEFF Research Database (Denmark)

    Vidal, Enrique Sanchez; Stoustrup, Jakob; Andersen, Palle;

    2001-01-01

    By measuring the current through the coil of the actuators in the optical pick-up in a compact disk player, open loop parametric system identification can be performed. The parameters are identified by minimizing the least-squares loss function of the ARX model. The only parameter which cannot...

  11. SLSF loop handling system. Volume III. AISC code evaluations and analysis of critical attachments. [LMFBR

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, H.; Cowie, A.; Malek, R. A.; Rafer, A.; Ma, D.; Tebo, F.

    1978-10-01

    SLSF loop handling system was analyzed for deadweight and postulated dynamic loading conditions using a linear elastic static equivalent method of stress analysis. Stress computations of Cradle and critical attachments per AISC Code guidelines are presented. HFEF is credited with in-depth review of initial phase of work.

  12. Development of advanced driver assistance systems with vehicle hardware-in-the-loop simulations

    NARCIS (Netherlands)

    Gietelink, O.J.; Ploeg, J.; Schutter, B.de; Verhaegen, M.

    2006-01-01

    This paper presents a new method for the design and validation of advanced driver assistance systems (ADASs). With vehicle hardware-in-the-loop (VEHIL) simulations, the development process, and more specifically the validation phase, of intelligent vehicles is carried out safer, cheaper, and is more

  13. Development of a driver information and warning system with vehicle hardware-in-the-loop simulations

    NARCIS (Netherlands)

    Gietelink, O.J.; Ploeg, J.; Schutter, B. de; Verhaegen, M.

    2009-01-01

    This paper presents a new method for the design and validation of advanced driver assistance systems (ADASs). With vehicle hardware-in-the-loop (VeHIL) simulations the development process, and more specifically the validation phase, of intelligent vehicles is carried out safer, cheaper, and more man

  14. H2-optimal control of an adaptive optics system: part II, closed-loop controller design

    NARCIS (Netherlands)

    Hinnen, K.; Doelman, N.; Verhaegen, M.

    2005-01-01

    The problem of finding the closed-loop optimal controller is formulated in an H2-optimal control framework. This provides a natural way to account for the fact that in many AO systems the wavefront phase cannot be measured directly. Given a multi-variable disturbance model of both wavefront slopes a

  15. Electrical engineering and nontechnical design variables of multiple inductive loop systems for auditoriums.

    Science.gov (United States)

    Alterovitz, Gil

    2004-01-01

    This research analyzed both engineering and nontechnical issues involved in the use of Induction Loop Amplification (ILA) devices in auditoriums or large gathering places for hard-of-hearing individuals. A variety of parameters need to be taken into account to determine an optimal shape/configuration for the ILA device. In many cases, an optimal configuration is different from those proposed for classroom use (Ross, 1969; Hodgson, 1986; Clevenger, 1992). Experimental results were obtained for a double-loop configuration in such a setting (a university gymnasium/auditorium in this case). The results demonstrate that a double-loop configuration is a viable possibility for auditorium use. Several variables using this configuration were examined, and experimentation was done. Various implications, including consequent nontechnical issues specific to this application, are discussed as well. Technical and nontechnical aspects of the ILA configuration need to be examined together when designing an optimal system.

  16. Fuzzy cognitive maps outmatch loop analysis in dynamic modeling of ecological systems

    OpenAIRE

    Alessandro Ferrarini

    2011-01-01

    Modeling natural systems is challenging due to their complexity in terms of variables, interactions, and dynamics. Much of this complexity is rooted in the existence of multiple ways through which acting variables affect each other. Besides the simple direct effects, numerous indirect effects emerge in ecological systems. Through an illustrative example, I exemplify here several advantages of fuzzy cognitive maps (FCM) over loop analysis (LA) in dynamic modeling of ecological systems. In addi...

  17. Closed-Loop Strategies for Patient Care Systems

    Science.gov (United States)

    2008-04-01

    clinician would approach control of a medical system. For example, when an anesthesiologist acts as a controller, he must con- sider the history of his...Intensive Care. 2002; 30:295–307. 51. Andrews PJ, Piper IR, Dearden NM, Miller JD. Secondary insults during intrahospital transport of head-injured

  18. Rate-distortion in Closed-Loop LTI Systems

    DEFF Research Database (Denmark)

    Silva, Eduardo; Derpich, Milan; Østergaard, Jan

    2013-01-01

    We consider a networked LTI system subject to an average data-rate constraint in the feedback path.We provide upper bounds to the minimal source coding rate required to achieve mean square stability and a desired level of performance. In the quadratic Gaussian case, an almost complete rate-distor...

  19. A novel open-loop tracking strategy for photovoltaic systems.

    Science.gov (United States)

    Alexandru, Cătălin

    2013-01-01

    This paper approaches a dual-axis equatorial tracking system that is used to increase the photovoltaic efficiency by maximizing the degree of use of the solar radiation. The innovative aspect in the solar tracker design consists in considering the tracking mechanism as a perturbation for the DC motors. The goal is to control the DC motors, which are perturbed with the motor torques whose computation is based on the dynamic model of the mechanical structure on which external forces act. The daily and elevation angles of the PV module represent the input parameters in the mechanical device, while the outputs transmitted to the controller are the motor torques. The controller tuning is approached by a parametric optimization process, using design of experiments and response surface methodology techniques, in a multiple regression. The simulation and experimental results demonstrate the operational performance of the tracking system.

  20. A Novel Open-Loop Tracking Strategy for Photovoltaic Systems

    Directory of Open Access Journals (Sweden)

    Cătălin Alexandru

    2013-01-01

    Full Text Available This paper approaches a dual-axis equatorial tracking system that is used to increase the photovoltaic efficiency by maximizing the degree of use of the solar radiation. The innovative aspect in the solar tracker design consists in considering the tracking mechanism as a perturbation for the DC motors. The goal is to control the DC motors, which are perturbed with the motor torques whose computation is based on the dynamic model of the mechanical structure on which external forces act. The daily and elevation angles of the PV module represent the input parameters in the mechanical device, while the outputs transmitted to the controller are the motor torques. The controller tuning is approached by a parametric optimization process, using design of experiments and response surface methodology techniques, in a multiple regression. The simulation and experimental results demonstrate the operational performance of the tracking system.

  1. Development of Phase Lock Loop System for Synchronisation of a Hybrid System with the Grid

    Directory of Open Access Journals (Sweden)

    A. S. Abubakar

    2016-06-01

    Full Text Available Phase locked loop (PLL is an important part of the control unit of the grid connected power converter. The method of zero crossing detection (ZCD does not produce accurate phase information when grid is non-ideal. In this work, a synchronous reference frame (SRF PLL method to obtain accurate phase information when the grid voltages are unbalanced is proposed. The performances of the PLL have been verified for ideal and abnormal grid conditions such as unbalance, voltage sag, faults condition etc. Based on the results obtained, the developed PLL gives better fault ride when unbalances in the three phase input signals are overall handled well by the PLL system as it locks the two signal back within the first cycle. It also overcomes a phase jump after 5 milli-seconds from the time the fault was introduced and performs better tracking of the grid voltage and that of the renewable energy source.

  2. Development of Phase Lock Loop System for Synchronisation of a Hybrid System with the Grid

    Directory of Open Access Journals (Sweden)

    A. S. Abubakar

    2016-12-01

    Full Text Available Phase locked loop (PLL is an important part of the control unit of the grid connected power converter. The method of zero crossing detection (ZCD does not produce accurate phase information when grid is non-ideal. In this work, a synchronous reference frame (SRF PLL method to obtain accurate phase information when the grid voltages are unbalanced is proposed. The performances of the PLL have been verified for ideal and abnormal grid conditions such as unbalance, voltage sag, faults condition etc. Based on the results obtained, the developed PLL gives better fault ride when unbalances in the three phase input signals are overall handled well by the PLL system as it locks the two signal back within the first cycle. It also overcomes a phase jump after 5 milli-seconds from the time the fault was introduced and performs better tracking of the grid voltage and that of the renewable energy source.

  3. Design and implementation of E-Kanban voice system based on Wifi%基于Wifi的电子看板语音系统设计实现

    Institute of Scientific and Technical Information of China (English)

    赵慧元; 孙鲁; 苏禹; 彭文亮

    2012-01-01

    E-Kanban widely used in Industrial production areas The paper introduce a new type E-Kanban. compared with traditional one , the system Add IC card authentication, video monitoring, voice call functions, among them the voice call enhance the work field management, and voice broadcast is also implementation, it can provide real time voice training. The function consists of two parts-position machine and embedded system, voice is compressed by adpcm and transferred by wifi. Through testing, the voice is clear and no delay.%电子看版广泛的应用到工业生产领域,文中介绍了一种新型基于arm嵌入式的工业电子看板。和传统的电子看板系统相比,增加了刷卡认证、视频监控、语音通话。其中语音通话增强现场的管理,并能实现广播,给现场人员提供实时培训等功能。语音系统包括上位机及嵌入式两部分组成,语音采用adpcm进行压缩并通过wifi传输,通过测试语音输出清晰、没有延迟。

  4. Depressor effect of closed-loop chip system in spontaneously hypertensive rats.

    Science.gov (United States)

    Gao, Xing-Ya; Huang, Xing-Lin; Wang, Han-Jun; Zhou, Li-Min; Xu, Yao; Wang, Wei; Zhu, Guo-Qing

    2007-12-30

    We previously reported that a closed-loop chip system was designed to decrease arterial pressure in normal rabbits and rats. In the present study, the depressor effects of the chip system were investigated in spontaneously hypertensive rats (SHR) and Wistar-Kyoto rats (WKY). The arterial pressure was recorded, sampled, operated and processed in the chip system. The chip system instantaneously controlled arterial pressure by stimulating the left aortic depressor nerve according to the feedback signals of arterial pressure. The closed-loop chip system effectively decreased mean arterial pressure (MAP) and heart rate (HR) in both SHR and WKY rats. It decreased the duration and the maximal MAP level of the pressor response evoked by either intravenous injection of phenylephrine or cutaneous nociceptive stimulation in SHR, but had no significant effect on the magnitude of the increase in MAP. Furthermore, the chip system significantly increased the baroreflex gain in SHR, but not in normal WKY rats. These results suggest that the closed-loop chip system effectively decreases the arterial pressure and increases baroreflex gain in SHR. The chip system does not abolish the arterial pressure responses to accidental pressor events, but decreases the duration and the maximal MAP level of the pressor responses.

  5. Design of MAGLEV Information Transmission System by Radio Inductive Loop

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Sang Kweun [Taejon National University of Technology (Korea, Republic of); Park, Seok Ha; Kim, Jong Bum; Kim, Yang Mo [Chungnam National University (Korea, Republic of); Park, Jeong Soo [ACE Technology (Korea, Republic of)

    1999-01-01

    This paper presents the information transmission between on-board and ground-site in MAGLEV Considering safety and high speed operation and density operation and density operation information, transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied, To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70khz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation in future. (author). 9 refs., 9 figs., 1 tab.

  6. Syllogisms delivered in an angry voice lead to improved performance and engagement of a different neural system compared to neutral voice

    Directory of Open Access Journals (Sweden)

    Kathleen Walton Smith

    2015-05-01

    Full Text Available Despite the fact that most real-world reasoning occurs in some emotional context, very little is known about the underlying behavioral and neural implications of such context. To further understand the role of emotional context in logical reasoning we scanned 15 participants with fMRI while they engaged in logical reasoning about neutral syllogisms presented through the auditory channel in a sad, angry, or neutral tone of voice. Exposure to angry voice led to improved reasoning performance compared to exposure to sad and neutral voice. A likely explanation for this effect is that exposure to expressions of anger increases selective attention toward the relevant features of target stimuli, in this case the reasoning task. Supporting this interpretation, reasoning in the context of angry voice was accompanied by activation in the superior frontal gyrus—a region known to be associated with selective attention. Our findings contribute to a greater understanding of the neural processes that underlie reasoning in an emotional context by demonstrating that two emotional contexts, despite being of the same (negative valence, have different effects on reasoning.

  7. Evaluation of an Intelligent Assistive Technology for Voice Navigation of Spreadsheets

    CERN Document Server

    Flood, Derek; Caffery, Fergal Mc; Bishop, Brian

    2008-01-01

    An integral part of spreadsheet auditing is navigation. For sufferers of Repetitive Strain Injury who need to use voice recognition technology this navigation can be highly problematic. To counter this the authors have developed an intelligent voice navigation system, iVoice, which replicates common spreadsheet auditing behaviours through simple voice commands. This paper outlines the iVoice system and summarizes the results of a study to evaluate iVoice when compared to a leading voice recognition technology.

  8. Characterization and closed-loop performance of a liquid mirror adaptive optical system.

    Science.gov (United States)

    ten Have, Eric S; Vdovin, Gleb

    2012-04-20

    A deformable mirror based on the principle of total internal reflection of light from an electrostatically deformed liquid-air interface was realized and used to perform closed-loop adaptive optical (AO) correction on a collimated laser beam aberrated by a rotating phase disk. Equations describing the resonant and oscillatory behavior of the liquid system were obtained and applied to the system under consideration. Characterization of the mirror included open- and closed-loop frequency responses, determination of rise times, the damping times of the liquid, and the influence of liquid surface motion in the absence of external optical aberrations. The performance of the AO system was determined for static and dynamic aberrations for various sets of system parameters. The predictions of the general expressions were compared to the results of the experimental realization and were found to be in good agreement.

  9. Androgynous, Reconfigurable Closed Loop Feedback Controlled Low Impact Docking System With Load Sensing Electromagnetic Capture Ring

    Science.gov (United States)

    Lewis, James L. (Inventor); Carroll, Monty B. (Inventor); Morales, Ray H. (Inventor); Le, Thang D. (Inventor)

    2002-01-01

    The present invention relates to a fully androgynous, reconfigurable closed loop feedback controlled low impact docking system with load sensing electromagnetic capture ring. The docking system of the present invention preferably comprises two Docking- assemblies, each docking assembly comprising a load sensing ring having an outer face, one of more electromagnets, one or more load cells coupled to said load sensing ring. The docking assembly further comprises a plurality of actuator arms coupled to said load sensing ring and capable of dynamically adjusting the orientation of said load sensing ring and a reconfigurable closed loop control system capable of analyzing signals originating from said plurality of load cells and of outputting real time control for each of the actuators. The docking assembly of the present invention incorporates an active load sensing system to automatically dynamically adjust the load sensing ring during capture instead of requiring significant force to push and realign the ring.

  10. Innovative design of closing loops producing an optimal force system applicable in the 0.022-in bracket slot system.

    Science.gov (United States)

    Sumi, Mayumi; Koga, Yoshiyuki; Tominaga, Jun-Ya; Hamanaka, Ryo; Ozaki, Hiroya; Chiang, Pao-Chang; Yoshida, Noriaki

    2016-12-01

    Most closing loops designed for producing higher moment-to-force (M/F) ratios require complex wire bending and are likely to cause hygiene problems and discomfort because of their complicated configurations. We aimed to develop a simple loop design that can produce optimal force and M/F ratio. A loop design that can generate a high M/F ratio and the ideal force level was investigated by varying the portion and length of the cross-sectional reduction of a teardrop loop and the loop position. The forces and moments acting on closing loops were calculated using structural analysis based on the tangent stiffness method. An M/F ratio of 9.3 (high enough to achieve controlled movement of the anterior teeth) and an optimal force level of approximately 250 g of force can be generated by activation of a 10-mm-high teardrop loop whose cross-section of 0.019 × 0.025 or 0.021 × 0.025 in was reduced in thickness by 50% for a distance of 3 mm from the apex, located between a quarter and a third of the interbracket distance from the canine bracket. The simple loop design that we developed delivers an optimal force and an M/F ratio for the retraction of anterior teeth, and is applicable in a 0.022-in slot system. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  11. A Polygeneration System Based on Multi-Input Chemical Looping Combustion

    Directory of Open Access Journals (Sweden)

    Xiaosong Zhang

    2014-11-01

    Full Text Available This paper proposes a polygeneration system based on a multi-input chemical looping combustion system, which generates methanol and electricity, through the use of natural gas and coal. In this system, the chemical looping hydrogen (CLH production system and the coal-based methanol production system are integrated. A high quality fuel, natural gas, is used to improve the conversion ratio of coal. The Gibbs energy of the two kinds of fuels is fully used. Benefitting from the chemical looping process, 27% CO2 can be captured without energy penalty. With the same outputs of methanol and electricity, the energy savings ratio of the new system is about 12%. Based on the exergy analyses, it is disclosed that the integration of synthetic utilization of natural gas and coal plays a significant role in reducing the exergy destruction of the new system. The promising results obtained in this paper may lead to a clean coal technology that will utilize natural gas and coal more efficiently and economically.

  12. Testing of the Geoscience Laser Altimeter System (GLAS) Prototype Loop Heat Pipe

    Science.gov (United States)

    Douglas, Donya; Ku, Jentung; Kaya, Tarik

    1998-01-01

    This paper describes the testing of the prototype loop heat pipe (LHP) for the Geoscience Laser Altimeter System (GLAS). The primary objective of the test program was to verify the loop's heat transport and temperature control capabilities under conditions pertinent to GLAS applications. Specifically, the LHP had to demonstrate a heat transport capability of 100 W, with the operating temperature maintained within +/-2K while the condenser sink was subjected to a temperature change between 273K and 283K. Test results showed that this loop heat pipe was more than capable of transporting the required heat load and that the operating temperature could be maintained within +/-2K. However, this particular integrated evaporator-compensation chamber design resulted in an exchange of energy between the two that affected the overall operation of the system. One effect was the high temperature the LHP was required to reach before nucleation would begin due to inability to control liquid distribution during ground testing. Another effect was that the loop had a low power start-up limitation of approximately 25 W. These Issues may be a concern for other applications, although it is not expected that they will cause problems for GLAS under micro-gravity conditions.

  13. Playful Interaction with Voice Sensing Modular Robots

    DEFF Research Database (Denmark)

    Heesche, Bjarke; MacDonald, Ewen; Fogh, Rune

    2013-01-01

    This paper describes a voice sensor, suitable for modular robotic systems, which estimates the energy and fundamental frequency, F0, of the user’s voice. Through a number of example applications and tests with children, we observe how the voice sensor facilitates playful interaction between...... children and two different robot configurations. In future work, we will investigate if such a system can motivate children to improve voice control and explore how to extend the sensor to detect emotions in the user’s voice....

  14. Three tritium systems test assembly (TSTA) off-loop experiments

    Energy Technology Data Exchange (ETDEWEB)

    Talcott, C.L.; Anderson, J.L.; Carlson, R.V.; Coffin, D.O.; Walthers, C.R.; Hamerdinger, D.; Binning, K.; Trujillo, R.D.; Moya, J.S. [Los Alamos National Lab., NM (United States); Hayashi, T.; Okuno, K.; Yamanishi, T. [Japan Atomic Energy Research Inst., Tokyo (Japan)

    1993-11-01

    This report contains the results from three different experiments. Experiment one was initiated to establish the possibility of using a soft elastomer in ITER (International Thermonuclear Experimental Reactor) applications. Used in this application, the sealing material is anticipated to be in tritium at pressures in the range of 1 {times} 10{sup {minus}3} torr for many years. Here two O-ring valve seals each of Viton-A, Buna-N, and EDPM were exposed to 1, 40, or 400 torr of tritium while being cycled open and closed approximately 11,500 times in 192 days. EDPM is the least susceptible to damage from the tritium. Both Buna-N and Viton-A showed deterioration following the first cycling at 400 torr. Using commercially available materials, the Tritium Systems Test Assembly (TSTA) designed and built a Portable Water Removal (PWR) Unit to reduce tritium oxide emissions during glovebox breaches. The PWR removes 99.9% of all tritium and saves between 0.7 and 3.5 curies of tritium oxide from being stacked during each of the five tests. Finally, a series of tests are done to determine whether the presence of SF{sub 6} changes the ability of palladium and platinum to catalyze the T{sub 2}-O{sub 2} reaction to form T{sub 2}O. No deterioration of the catalytic activity is observed. This is important because the Tokamak Fusion Test Reactor (TFTR) requires information about the effect of SF{sub 6}, an electrical insulator, on the catalytic behavior of Pt and Pd in a T{sub 2} environment. This information is necessary for the accident analysis in the Safety Analysis Report for TFTR. This study is done using an apparatus supplied to TSTA by TFTR.

  15. Artificial Pancreas Device Systems for the Closed-Loop Control of Type 1 Diabetes

    Science.gov (United States)

    Trevitt, Sara; Simpson, Sue; Wood, Annette

    2015-01-01

    Background: Closed-loop artificial pancreas device (APD) systems are externally worn medical devices that are being developed to enable people with type 1 diabetes to regulate their blood glucose levels in a more automated way. The innovative concept of this emerging technology is that hands-free, continuous, glycemic control can be achieved by using digital communication technology and advanced computer algorithms. Methods: A horizon scanning review of this field was conducted using online sources of intelligence to identify systems in development. The systems were classified into subtypes according to their level of automation, the hormonal and glycemic control approaches used, and their research setting. Results: Eighteen closed-loop APD systems were identified. All were being tested in clinical trials prior to potential commercialization. Six were being studied in the home setting, 5 in outpatient settings, and 7 in inpatient settings. It is estimated that 2 systems may become commercially available in the EU by the end of 2016, 1 during 2017, and 2 more in 2018. Conclusions: There are around 18 closed-loop APD systems progressing through early stages of clinical development. Only a few of these are currently in phase 3 trials and in settings that replicate real life. PMID:26589628

  16. Sustainable Consumer Voices

    DEFF Research Database (Denmark)

    Klitmøller, Anders; Rask, Morten; Jensen, Nevena

    2011-01-01

    Aiming to explore how user driven innovation can inform high level design strategies, an in-depth empirical study was carried out, based on data from 50 observations of private vehicle users. This paper reports the resulting 5 consumer voices: Technology Enthusiast, Environmentalist, Design Lover......, Pragmatist and Status Seeker. Expedient use of the voices in creating design strategies is discussed, thus contributing directly to the practice of high level design managers. The main academic contribution of this paper is demonstrating how applied anthropology can be used to generate insights...... into disruptive emergence of product service systems, where quantitative user analyses rely on historical continuation....

  17. Study of highly efficient power generation system based on chemical-looping combustion; Chemical loop nenshoho ni yoru kokoritsu hatsuden system no kaihatsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Ishida, S.; Suzuki, T.; Yamamoto, M. [Tokyo Institute of Technology, Tokyo (Japan). Research Laboratory of Resources Utilization

    1997-02-01

    This paper describes the research and development of power generation system by means of chemical-looping combustion. For this system, fuel flows in a reduction reactor and air flows in an oxidation reactor. These two flows are separated. As a result, recovery of CO2 without energy consumption, drastic improvement of power generation efficiency, and suppression of NOx emission are expected. To realize the above, two promising candidates, NiCoO2/YSZ and NiO2/NiAl2O4, have been found as recycle solid particles between the both reactors. These have excellent oxidation/reduction cycle characteristics. By these particles as well as the existing particle, NiO/YSZ, practical application of the chemical-looping combustion is realized. Besides LNG, coal and hydrogen were considered as fuels. When using coal or hydrogen, it was found that temperature of the reduction reactor should be increased the same as that of the oxidation reactor. This is a different point from a case using LNG as a fuel. 5 refs., 2 figs.

  18. A Cell-in-the-Loop Approach to Systems Modelling and Simulation of Energy Storage Systems

    Directory of Open Access Journals (Sweden)

    James Marco

    2015-08-01

    Full Text Available This research is aligned with the engineering challenge of scaling-up individual battery cells into a complete energy storage system (ESS. Manufacturing tolerances, coupled with thermal gradients and the differential electrical loading of adjacent cells, can result in significant variations in the rate of cell degradation, energy distribution and ESS performance. The uncertain transition from cell to system often manifests itself in over-engineered, non-optimal ESS designs within both the transport and energy sectors. To alleviate these issues, the authors propose a novel model-based framework for cell-in-the-loop simulation (CILS in which a physical cell may be integrated within a complete model of an ESS and exercised against realistic electrical and thermal loads in real-time. This paper focuses on the electrical integration of both real and simulated cells within the CILS test environment. Validation of the CILS approach using real-world electric vehicle data is presented for an 18650 cell. The cell is integrated within a real-time simulation model of a series string of similar cells in a 4sp1 configuration. Results are presented that highlight the impact of cell variability (i.e., capacity and impedance on the energy available from the multi-cell system and the useable capacity of the physical cell.

  19. DS-CDMA system outer loop power control and improvement for multi-service

    Institute of Scientific and Technical Information of China (English)

    Guan Mingxiang; Guo Qing; Li Xing

    2008-01-01

    When a new user accesses the CDMA system, the load will change drastically, and therefore, the advanced outer loop power control (OLPC) technology has to be adopted to enrich the target signal interference ratio (SIR) and improve the system performance. The existing problems about DS-CDMA outer loop power control for multi-service are introduced and the power control theoretical model is analyzed. System simulation is adopted on how to obtain the theoretical performance and parameter optimization of the power control algorithm. The OLPC algorithm is improved and the performance comparisons between the old algorithm and the improved algorithm are given. The results show good performance of the improved OLPC algorithm and prove the validity of the improved method for multi-service.

  20. Diagnosis of Fault Modes Masked by Control Loops with an Application to Autonomous Hovercraft Systems

    Directory of Open Access Journals (Sweden)

    Ioannis A. Raptis

    2013-01-01

    Full Text Available This paper introduces a methodology for the design, testing and assessment of incipient failure detection techniques for failing components/systems of an autonomous vehicle masked or hidden by feedback control loops. It is recognized that the optimum operation of critical assets (aircraft, autonomous systems, etc. may be compromised by feedback control loops by masking severe fault modes while compensating for typical disturbances. Detrimental consequences of such occurrences include the inability to detect expeditiously and accurately incipient failures, loss of control and inefficient operation of assets in the form of fuel overconsumption and adverse environmental impact. We pursue a systems engineering process to design, construct and test an autonomous hovercraft instrumented appropriately for improved autonomy. Hidden fault modes are detected with performance guarantees by invoking a Bayesian estimation approach called particle filtering. Simulation and experimental studies are employed to demonstrate the efficacy of the proposed methods.

  1. An error criterion for determining sampling rates in closed-loop control systems

    Science.gov (United States)

    Brecher, S. M.

    1972-01-01

    The determination of an error criterion which will give a sampling rate for adequate performance of linear, time-invariant closed-loop, discrete-data control systems was studied. The proper modelling of the closed-loop control system for characterization of the error behavior, and the determination of an absolute error definition for performance of the two commonly used holding devices are discussed. The definition of an adequate relative error criterion as a function of the sampling rate and the parameters characterizing the system is established along with the determination of sampling rates. The validity of the expressions for the sampling interval was confirmed by computer simulations. Their application solves the problem of making a first choice in the selection of sampling rates.

  2. Design of intelligent voice control system based on DSP%基于DSP的智能语音控制系统设计

    Institute of Scientific and Technical Information of China (English)

    郑微; 李正周; 田蕾

    2012-01-01

    利用语音命令实现与智能设备的交互已经成为现代控制理论研究的热门话题之一.介绍了一种基于数字信号处理器(DSP)、语音采集模块、无线收发模块、片上外设等资源实现的语音命令控制处理系统.该系统首先通过语音采集模块采集到语音控制信号;然后通过DSP和相应的片上外设实现对语音命令的识别;最后将识别的语音命令传递给无线收发模块以实现对于智能设备的控制.整个系统的设计应用领域广泛,可以为人机交互提供一种切实可行的参考方案.%Using voice commands to realize the interaction with intelligent equipment has become one of the hot topics in modern control theory. The voice command control processing system based on DSP, voice acquisition module, wireless transceiver module, on-chip peripheral resources is designed and realized. The voice control signals is acquired by the voice acquisition module in the system,and voice commands is recognized by DSP and on-chip peripheral resources, and the identified voice commands is transferred to the wireless transceiver module to control the intelligent equipment. The design application field of the whole system is very wide, and provides a kind of feasible and practical reference for human-computer interaction.

  3. A combined NLP-differential evolution algorithm approach for the optimization of looped water distribution systems

    Science.gov (United States)

    Zheng, Feifei; Simpson, Angus R.; Zecchin, Aaron C.

    2011-08-01

    This paper proposes a novel optimization approach for the least cost design of looped water distribution systems (WDSs). Three distinct steps are involved in the proposed optimization approach. In the first step, the shortest-distance tree within the looped network is identified using the Dijkstra graph theory algorithm, for which an extension is proposed to find the shortest-distance tree for multisource WDSs. In the second step, a nonlinear programming (NLP) solver is employed to optimize the pipe diameters for the shortest-distance tree (chords of the shortest-distance tree are allocated the minimum allowable pipe sizes). Finally, in the third step, the original looped water network is optimized using a differential evolution (DE) algorithm seeded with diameters in the proximity of the continuous pipe sizes obtained in step two. As such, the proposed optimization approach combines the traditional deterministic optimization technique of NLP with the emerging evolutionary algorithm DE via the proposed network decomposition. The proposed methodology has been tested on four looped WDSs with the number of decision variables ranging from 21 to 454. Results obtained show the proposed approach is able to find optimal solutions with significantly less computational effort than other optimization techniques.

  4. Natural circulation loop using liquid nitrogen for cryo-detection system

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yeon Suk [Korea Basic Science Institute, 169-148 Gwahak-ro, Yuseong-gu, Daejeon, 305-806 (Korea, Republic of)

    2014-01-29

    The natural circulation loop is designed for the cryogenic insert in a Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. Sensitivity is the key parameter of a FTICR mass spectrometer and the cryo-cooling of the pre-amplifier can reduce the thermal noise level and thereby improve the signal-to-noise ratio. The pre-amplifier consisted of non-magnetic materials is thermally connected to the cooling loop which is passing through the flange maintaining ultra-high vacuum in the ion cell. The liquid nitrogen passes through inside of the loop to cool the pre-amplifier indirectly. At the end, a cryocooler is located to re-condense nitrogen vapor generated due to the heat from the pre-amplifier. The circulating fluid removes heat from the pre-amplifier and transports it to the cryocooler or heat sink. In this paper the natural circulation loop for cryogenic pre-amplifier is introduced for improving the sensitivity of cryo-detector. In addition, the initial cool-down of the system by a cryocooler is presented and the temperature of the radiation shield is discussed with respect to the thickness of shield and the thermal radiation load.

  5. Hydrodynamics of a hybrid circulating fluidized bed reactor with a partitioned loop seal system

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Dal-Hee; Moon, Jong-Ho; Jin, Gyoung Tae; Shun, Dowon [Korea Institute of Energy Research, Daejeon (Korea, Republic of); Yun, Minyoung; Park, Chan Seung; Norbeck, Joseph M. [University of California, Riverside (United States)

    2015-07-15

    A circulating fluidized bed (CFB) with a hybrid design has been developed and optimized for steam hydrogasification. The hybrid CFB is composed of a bubbling fluidized bed (BFB) type combustor and a fast fluidized bed (FB) type gasifier. Char is burnt in the combustor and the generated heat is supplied to the gasifier along with the bed materials. Two different types of fluidized beds are connected to each other with a newly developed partitioned loop seal to avoid direct contact between two separate gas streams flowing in each fluidized bed. Gas mixing tests were carried out with Air and Argon in a cold model hybrid CFB to test the loop seal efficiency. Increase in solid inventory in the loop seal can improve the gas separation efficiency. It can be realized at higher gas velocity in fast bed and with higher solid inventory in the loop seal system. In addition, bed hydrodynamics was investigated with varying gas flow conditions and particle sizes in order to obtain a full understanding of changes of solid holdup in the FB. The solid holdup in the FB increased with increasing gas velocity in the BFB. Conversely, increase in gas velocity in the FB contributed to reducing the solid holdup in the FB. It was observed that changing the particle size of bed material does not have a big impact on hydrodynamic parameters.

  6. Listen to a voice

    DEFF Research Database (Denmark)

    Hølge-Hazelton, Bibi

    2001-01-01

    Listen to the voice of a young girl Lonnie, who was diagnosed with Type 1 diabetes at 16. Imagine that she is deeply involved in the social security system. She lives with her mother and two siblings in a working class part of a small town. She is at a special school for problematic youth, and he...

  7. What the voice reveals.

    NARCIS (Netherlands)

    Ko, Sei Jin

    2007-01-01

    Given that the voice is our main form of communication, we know surprisingly little about how it impacts judgment and behavior. Furthermore, the modern advancement in telecommunication systems, such as cellular phones, has meant that a large proportion of our everyday interactions are conducted voca

  8. Voices for Careers.

    Science.gov (United States)

    York, Edwin G.; Kapadia, Madhu

    Listed in this annotated bibliography are 502 cassette tapes of value to career exploration for Grade 7 through the adult level, whether as individualized instruction, small group study, or total class activity. Available to New Jersey educators at no charge, this Voices for Careers System is also available for duplication on request from the New…

  9. What the voice reveals

    NARCIS (Netherlands)

    Ko, Sei Jin

    2007-01-01

    Given that the voice is our main form of communication, we know surprisingly little about how it impacts judgment and behavior. Furthermore, the modern advancement in telecommunication systems, such as cellular phones, has meant that a large proportion of our everyday interactions are conducted voca

  10. Design and implementation of sensor systems for control of a closed-loop life support system

    Science.gov (United States)

    Alnwick, Leslie; Clark, Amy; Debs, Patricia; Franczek, Chris; Good, Tom; Rodrigues, Pedro

    1989-01-01

    The sensing and controlling needs for a Closed-Loop Life Support System (CLLSS) were investigated. The sensing needs were identified in five particular areas and the requirements were defined for workable sensors. The specific areas of interest were atmosphere and temperature, nutrient delivery, plant health, plant propagation and support, and solids processing. The investigation of atmosphere and temperature control focused on the temperature distribution within the growth chamber as well as the possibility for sensing other parameters such as gas concentration, pressure, and humidity. The sensing needs were studied for monitoring the solution level in a porous membrane material along with the requirements for measuring the mass flow rate in the delivery system. The causes and symptoms of plant disease were examined and the various techniques for sensing these health indicators were explored. The study of sensing needs for plant propagation and support focused on monitoring seed viability and measuring seed moisture content as well as defining the requirements for drying and storing the seeds. The areas of harvesting, food processing, and resource recycling, were covered with a main focus on the sensing possibilities for regulating the recycling process.

  11. Closed-Loop Control System for Friction Stir Welding Retractable Pin Tool

    Science.gov (United States)

    Ding, R. Jeffrey; Romine, Peter L.; Munafo, Paul M. (Technical Monitor)

    2001-01-01

    NASA invention disclosure, NASA Case No. MFS-31413, entitled "System for Controlling the Stirring Pin of a Friction Stir Welding Apparatus", (Patent Pending) authored by Jeff Ding, Dr Peter Romine and Pete Oelgoetz, addresses the precision control of the friction stir welding process. The closed-loop control system automatically adjusts the spinning welding pin, real-time, to maintain a precise penetration ligament (i.e., distance between pin-tip and weld panel backside surface). A specific pin length can be maintained while welding constant thickness or tapered material thickness weld panels. The closed-loop control system provides operator data and information relative to the exact position of the welding pin inside the weld joint. This paper presents the closed-loop RPT control system that operates using the auto-feedback of force signals sensed by the tip and shoulder of the welding pin. Significance: The FSW process can be successfully used in a production environment only if there is a method or technique that informs the FSW operator the precise location of the welding pin inside the weld joint. This is essential for applications in aerospace, automotive, pressure vessel, commercial aircraft and other industries.

  12. Game Theoretical Power Control for Open-Loop Overlaid Network MIMO Systems with Partial Cooperation

    CERN Document Server

    Yu, Hao; Lau, Vincent K N

    2010-01-01

    Network MIMO is considered to be a key solution for the next generation wireless systems in breaking the interference bottleneck in cellular systems. In the MIMO systems, open-loop transmission scheme is used to support mobile stations (MSs) with high mobilities because the base stations (BSs) do not need to track the fast varying channel fading. In this paper, we consider an open-loop network MIMO system with $K$ BSs serving K private MSs and $M^c$ common MS based on a novel partial cooperation overlaying scheme. Exploiting the heterogeneous path gains between the private MSs and the common MSs, each of the $K$ BSs serves a private MS non-cooperatively and the $K$ BSs also serve the $M^c$ common MSs cooperatively. The proposed scheme does not require closed loop instantaneous channel state information feedback, which is highly desirable for high mobility users. Furthermore, we formulate the long-term distributive power allocation problem between the private MSs and the common MSs at each of the $K$ BSs using...

  13. Simulation of Hybrid Photovoltaic Solar Assisted Loop Heat Pipe/Heat Pump System

    Directory of Open Access Journals (Sweden)

    Nannan Dai

    2017-02-01

    Full Text Available A hybrid photovoltaic solar assisted loop heat pipe/heat pump (PV-SALHP/HP water heater system has been developed and numerically studied. The system is the combination of loop heat pipe (LHP mode and heat pump (HP mode, and the two modes can be run separately or compositely according to the weather conditions. The performances of independent heat pump (HP mode and hybrid loop heat pipe/heat pump (LHP/HP mode were simulated and compared. Simulation results showed that on typical sunny days in spring or autumn, using LHP/HP mode could save 40.6% power consumption than HP mode. In addition, the optimal switchover from LHP mode to HP mode was analyzed in different weather conditions for energy saving and the all-year round operating performances of the system were also simulated. The simulation results showed that hybrid LHP/HP mode should be utilized to save electricity on sunny days from March to November and the system can rely on LHP mode alone without any power consumption in July and August. When solar radiation and ambient temperature are low in winter, HP mode should be used

  14. Designing a Closed Loop System for PET Bottles Recovery in Nigeria

    OpenAIRE

    Lincoln, Joseph

    2015-01-01

    The project is to design a closed loop system for PET bottle recovery. The purpose is to tackle the issue of indiscriminate dumping of PET bottles and to build a sustainable long term design to enable manufacturing companies reclaim used PET bottles, recycle and reuse the bottles in their manufacturing operations The thesis consist of the theoretical and the empirical sections which helped the author to divide the project into two different design options to fit the Nigerian context. In o...

  15. Study on Hardware-in-loop Simulation of Twin-screw Extruder Experiment System

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>In order to facilitate the teaching of industrial processes and experiments on the twin-screw extruder control debugging,and be closer to the actual testing,to reduce the debugging costs and the risk of debugging process,the paper designs a hardware-in-loop simulation of twin-screw extruder experiment system which is closer to scene,low cost and high safety.The system through the establishment of twin-screw extruder’s mathematical model on computer to simulate the realistic system and there is hardware practicality in the computer simulation loop.The hardware based on C8051F020 can operate in the simulation loop in real time.In computer software design, we desigh man-machine interface that is intuitive and easy to operate,can reflect twin-screw extruder main operation information vividly.Finally,twin-screw extruder’s 3 heater temperature mathematical model and PID incremental control algorithm are presented.

  16. Ground experimental investigations into an ejected spray cooling system for space closed-loop application

    Directory of Open Access Journals (Sweden)

    Zhang Hongsheng

    2016-06-01

    Full Text Available Spray cooling has proved its superior heat transfer performance in removing high heat flux for ground applications. However, the dissipation of vapor–liquid mixture from the heat surface and the closed-loop circulation of the coolant are two challenges in reduced or zero gravity space environments. In this paper, an ejected spray cooling system for space closed-loop application was proposed and the negative pressure in the ejected condenser chamber was applied to sucking the two-phase mixture from the spray chamber. Its ground experimental setup was built and experimental investigations on the smooth circle heat surface with a diameter of 5 mm were conducted with distilled water as the coolant spraying from a nozzle of 0.51 mm orifice diameter at the inlet temperatures of 69.2 °C and 78.2 °C under the conditions of heat flux ranging from 69.76 W/cm2 to 311.45 W/cm2, volume flow through the spray nozzle varying from 11.22 L/h to 15.76 L/h. Work performance of the spray nozzle and heat transfer performance of the spray cooling system were analyzed; results show that this ejected spray cooling system has a good heat transfer performance and provides valid foundation for space closed-loop application in the near future.

  17. Ground experimental investigations into an ejected spray cooling system for space closed-loop application

    Institute of Scientific and Technical Information of China (English)

    Zhang Hongsheng; Li Yunze; Wang Shengnan; Liu Yang; Zhong Mingliang

    2016-01-01

    Spray cooling has proved its superior heat transfer performance in removing high heat flux for ground applications. However, the dissipation of vapor–liquid mixture from the heat sur-face and the closed-loop circulation of the coolant are two challenges in reduced or zero gravity space environments. In this paper, an ejected spray cooling system for space closed-loop application was proposed and the negative pressure in the ejected condenser chamber was applied to sucking the two-phase mixture from the spray chamber. Its ground experimental setup was built and exper-imental investigations on the smooth circle heat surface with a diameter of 5 mm were conducted with distilled water as the coolant spraying from a nozzle of 0.51 mm orifice diameter at the inlet temperatures of 69.2 ?C and 78.2 ?C under the conditions of heat flux ranging from 69.76 W/cm2 to 311.45 W/cm2, volume flow through the spray nozzle varying from 11.22 L/h to 15.76 L/h. Work performance of the spray nozzle and heat transfer performance of the spray cooling system were analyzed;results show that this ejected spray cooling system has a good heat transfer performance and provides valid foundation for space closed-loop application in the near future.

  18. Osmotic Ballasts Enhance Faradaic Efficiency in Closed-Loop, Membrane-Based Energy Systems.

    Science.gov (United States)

    Kingsbury, Ryan S; Coronell, Orlando

    2017-02-07

    Aqueous processes for energy storage and conversion based on reverse electrodialysis (RED) require a significant concentration difference across ion exchange membranes, creating both an electrochemical potential and an osmotic pressure difference. In closed-loop RED, which we recently demonstrated as a new means of energy storage, the transport of water by osmosis has a very significant negative impact on the faradaic efficiency of the system. In this work, we use neutral, nonpermeating solutes as "osmotic ballasts" in a closed-loop concentration battery based on RED. We present experimental results comparing two proof-of-concept ballast molecules, and show that the ballasts reduce, eliminate, or reverse the net transport of water through the membranes when cycling the battery. By mitigating osmosis, faradaic and round-trip energy efficiency are more than doubled, from 18% to 50%, and 7% to 15%, respectively in this nonoptimized system. However, the presence of the ballasts has a slightly negative impact on the open circuit voltage. Our results suggest that balancing osmotic pressure using noncharged solutes is a promising approach for significantly reducing faradaic energy losses in closed-loop RED systems.

  19. 智能音控小车系统设计%Design of an Intelligent Voice Trolley System

    Institute of Scientific and Technical Information of China (English)

    曹斌芳; 李建奇; 胡惟文

    2012-01-01

    The design of an intelligent voice vehicle system was introduced,which uses sunplus's microcomputer SPCE061A as the core control portion,and drives chip L298N of electrical motor as the main control modules in the design.According to recorded the voice command the system can control the car to start,stop,return and turn.The run state of the intellectual vehicle shows that the project is feasible.%以凌阳单片机SPCE061A为核心控制部件,电机驱动芯片L298N为主要元件,以语音小车控制电路板为辅,设计并制作了一种智能音控小车系统。该系统能根据录制的语音命令来控制小车的启动、停止、返回、拐弯。智能音控小车的运行状态表明该设计方案是可行的。

  20. Temperature Control System with Multi-closed Loops for Lithography Projection Lens

    Institute of Scientific and Technical Information of China (English)

    NIE Hongfei; LI Xiaoping; HE yan

    2009-01-01

    Image quality is one of the most important specifications of optical lithography tool and is affected notably by temperature, vibration, and contamination of projection lens(PL). Traditional method of local temperature control is easier to introduce vibration and contamination, so temperature control system with multi-closed loops is developed to control the temperature inside the PL, and to isolate the influence of vibration and contamination. A new remote indirect-temperature-control(RITC) method is proposed in which cooling water is circulated to perform indirect-temperature-control of the PL. Heater and cooler embedded temperature control unit(TCU) is used to condition the temperature of the cooling water, and the TCU must be kept away from the PL so that the influence of vibration and contamination can be avoided. A new multi-closed loops control structure incorporating an internal cascade control structnre(CCS) and an external parallel cascade control structure(PCCS) is designed tO prevent large inertia, multi-delay, and multi-disturbance of the RITC system. A nonlinear proportioual-integral(Pl) algorithm is applied to further enhance the convergence rate and precision of the control process. Contrast experiments of different control loops and algorithms were implemented to verify the impact on the control performance. It is shown that the temperature control system with multi-closed loops reaches a precision specification at ±0.006 ℃ with fast convergence rate, strong robustness, and self-adaptability. This method has been successfully used in an optical lithography tool which produces a pattern of 100 nm critical dimeusion(CD), and its performances are satisfactory.

  1. New trends in diabetes management: mobile telemedicine closed-loop system.

    Science.gov (United States)

    Hernando, M Elena; Gómez, Enrique J; Gili, Antonio; Gómez, Mónica; García, Gema; del Pozo, Francisco

    2004-01-01

    The rapid growth and development of information technologies over recent years, in the areas of mobile and wireless technologies is shaping a new technological scenario of telemedicine in diabetes. This telemedicine scenario can play an important role for further acceptance by diabetic patients of the existing continuous glucose monitoring systems and insulin pumps with the final goal of improving current therapeutic procedures. This paper describes a Personal Smart Assistant integrated in a multi-access telemedicine architecture for the implementation of a mobile telemedicine closed-loop system for diabetes management. The system is being evaluated within the European Union project named INCA ("Intelligent Control Assistant for Diabetes").

  2. Hardware in the loop simulation test platform of fuel cell backup system

    Directory of Open Access Journals (Sweden)

    Ma Tiancai

    2015-01-01

    Full Text Available Based on an analysis of voltage mechanistic model, a real-time simulation model of the proton exchange membrane (PEM fuel cell backup system is developed, and verified by the measurable experiment data. The method of online parameters identification for the model is also improved. Based on the software LabVIEW/VeriStand real-time environment and the PXI Express hardware system, the PEM fuel cell system controller hardware in the loop (HIL simulation plat-form is established. Controller simulation test results showed the accuracy of HIL simulation platform.

  3. Inverse synchronization of coupled fractional-order systems through open-plus-closed-loop control

    Indian Academy of Sciences (India)

    Junwei Wang; Li Zeng; Qinghua Ma

    2011-03-01

    In this paper, the inverse synchronization problem of fractional-order dynamical systems is investigated. A general explicit coupling via an open-plus-closed-loop control for inverse synchronization of two arbitrary unidirectionally or bidirectionally coupled fractional-order systems is proposed. The inverse synchronization is proved analytically based on the stability theorem of the fractional differential equations. A key feature of this proposed scheme is that it can be applied not only to nonchaotic but also to chaotic fractional-order systems whenever they exhibit regular or irregular oscillations. Feasibility of the proposed inverse synchronization scheme is illustrated through numerical simulations.

  4. Closing the Loop with Sensors in Commercial Building Systems: Applying Lessons from Automotive Vehicles

    Science.gov (United States)

    Mantese, Joseph

    2011-08-01

    Automotive systems have evolved extensively over the past 50 years, providing a fully integrated system of sub-systems that work in concert for optimal vehicle level closed loop control. In this talk we look at several automotive sub-systems: stability and control, safety and security, emissions and comfort, diagnostics and maintenance, infotainment and communications; with an eye toward understanding their technology drivers and associated value propositions. Conversely, we examine how commercial building systems currently are represented as a collection of sub-systems that often work independently of each other for local optimization, often relying upon open loop control systems developed and installed decades ago. Reasoning primarily by analogy we explore opportunities for energy and efficiency, comfort and environment, and safety/security; asking whether there is sufficient value associated with a new class of building sensors and how those technologies might be brought to bear in improving performance. Finally, we examine the fundamental architecture of detection systems built upon sensing elements, with the aim of understanding trade-offs between: detection, false alarm rate, power, and cost.

  5. Closed loop chemical systems for energy storage and transmission (chemical heat pipe). Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vakil, H.B.; Flock, J.W.

    1978-02-01

    The work documents the anlaysis of closed loop chemical systems for energy storage and transmission, commonly referred to as the Chemical Heat Pipe (CHP). Among the various chemical reaction systems and sources investigated, the two best systems were determined to be the high temperature methane/steam reforming reaction (HTCHP) coupled to a Very High Temperature Gas Cooled Reactor (VHTR) and the lower temperature, cyclohexane dehydrogenation reaction (LTCHP) coupled to existing sources such as coal or light water reactors. Solar and other developing technologies can best be coupled to the LTCHP. The preliminary economic and technical analyses show that both systems could transport heat at an incremental cost of approximately $1.50/GJ/160 km (in excess of the primary heat cost of $2.50/GJ), at system efficiencies above 80%. Solar heat can be transported at an incremental cost of $3/GJ/160 km. The use of the mixed feed evaporator concept developed in this work contributes significantly to reducing the transportation cost and increasing the efficiency of the system. The LTCHP shows the most promise of the two systems if the technical feasibility of the cyclic closed loop chemical reaction system can be established. An experimental program for establishing this feasibility is recommended. Since the VHTR is several years away from commercial demonstration and the HTCHP chemical technology is well developed, future HTCHP programs should be aimed at VHTR and interface problems.

  6. Benchmarking Model Variants in Development of a Hardware-in-the-Loop Simulation System

    Science.gov (United States)

    Aretskin-Hariton, Eliot D.; Zinnecker, Alicia M.; Kratz, Jonathan L.; Culley, Dennis E.; Thomas, George L.

    2016-01-01

    Distributed engine control architecture presents a significant increase in complexity over traditional implementations when viewed from the perspective of system simulation and hardware design and test. Even if the overall function of the control scheme remains the same, the hardware implementation can have a significant effect on the overall system performance due to differences in the creation and flow of data between control elements. A Hardware-in-the-Loop (HIL) simulation system is under development at NASA Glenn Research Center that enables the exploration of these hardware dependent issues. The system is based on, but not limited to, the Commercial Modular Aero-Propulsion System Simulation 40k (C-MAPSS40k). This paper describes the step-by-step conversion from the self-contained baseline model to the hardware in the loop model, and the validation of each step. As the control model hardware fidelity was improved during HIL system development, benchmarking simulations were performed to verify that engine system performance characteristics remained the same. The results demonstrate the goal of the effort; the new HIL configurations have similar functionality and performance compared to the baseline C-MAPSS40k system.

  7. OBSERVATIONS OF LINEAR POLARIZATION IN A SOLAR CORONAL LOOP PROMINENCE SYSTEM OBSERVED NEAR 6173 Å

    Energy Technology Data Exchange (ETDEWEB)

    Saint-Hilaire, Pascal; Martínez Oliveros, Juan-Carlos; Hudson, Hugh S.; Krucker, Säm; Bain, Hazel [Space Sciences Laboratory, University of California, Berkeley, CA 94720 (United States); Schou, Jesper [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig-Weg 3, D-37077 Göttingen (Germany); Couvidat, Sébastien, E-mail: shilaire@ssl.berkeley.edu [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA 94305 (United States)

    2014-05-10

    White-light observations by the Solar Dynamics Observatory's Helioseismic and Magnetic Imager of a loop-prominence system occurring in the aftermath of an X-class flare on 2013 May 13 near the eastern solar limb show a linearly polarized component, reaching up to ∼20% at an altitude of ∼33 Mm, about the maximum amount expected if the emission were due solely to Thomson scattering of photospheric light by the coronal material. The mass associated with the polarized component was 8.2 × 10{sup 14} g. At 15 Mm altitude, the brightest part of the loop was 3(±0.5)% linearly polarized, only about 20% of that expected from pure Thomson scattering, indicating the presence of an additional unpolarized component at wavelengths near Fe I (617.33 nm). We estimate the free electron density of the white-light loop system to possibly be as high as 1.8 × 10{sup 12} cm{sup –3}.

  8. Helioseismic and Magnetic Imager observations of linear polarization from a loop prominence system

    CERN Document Server

    Saint-Hilaire, Pascal; Oliveros, Juan-Carlos Martínez; Hudson, Hugh S; Krucker, Säm; Bain, Hazel; Couvidat, Sébastien

    2014-01-01

    White-light observations by the Solar Dynamics Observatory's Helioseismic and Magnetic Imager of a loop-prominence system occurring in the aftermath of an X-class flare on 2013 May 13 near the eastern solar limb show a linearly polarized component, reaching up to $\\sim$20% at an altitude of $\\sim$33 Mm, about the maximal amount expected if the emission were due solely to Thomson scattering of photospheric light by the coronal material. The mass associated with the polarized component was 8.2$\\times$10$^{14}$ g. At 15 Mm altitude, the brightest part of the loop was 3(+/-0.5)% linearly polarized, only about 20% of that expected from pure Thomson scattering, indicating the presence of an additional unpolarized component at wavelengths near Fe I (617.33 nm), probably thermal emission. We estimated the free electron density of the white-light loop system to possibly be as high as 1.8$\\times$10$^{12}$ cm$^{-3}$.

  9. A digital phase locked loop based signal and symbol recovery system for wireless channel

    CERN Document Server

    Purkayastha, Basab Bijoy

    2015-01-01

    The book reports two approaches of implementation of the essential components of a Digital Phase Locked Loop based system for dealing with wireless channels showing Nakagami-m fading. It is mostly observed in mobile communication. In the first approach, the structure of a Digital phase locked loop (DPLL) based on Zero Crossing (ZC) algorithm is proposed. In a modified form, the structure of a DPLL based systems for dealing with Nakagami-m fading based on Least Square Polynomial Fitting Filter is proposed, which operates at moderate sampling frequencies. A sixth order Least Square Polynomial Fitting (LSPF) block and Roots Approximator (RA) for better phase-frequency detection has been implemented as a replacement of Phase Frequency Detector (PFD) and Loop Filter (LF) of a traditional DPLL, which has helped to attain optimum performance of DPLL. The results of simulation of the proposed DPLL with Nakagami-m fading and QPSK modulation is discussed in detail which shows that the proposed method provides better pe...

  10. Study on rejection characteristic of current loop to the base disturbance of optical communication system

    Science.gov (United States)

    Mao, Yao; Deng, Chao; Liu, Qiong; Cao, Zheng

    2016-10-01

    As laser has narrow transmitting beam and small divergence angle, the LOS (Line of Sight) stabilization of optical communication system is a primary precondition of laser communication links. Compound axis control is usually adopted in LOS stabilization of optical communication system, in which coarse tracking and fine tracking are included. Rejection against high frequency disturbance mainly depends on fine tracking LOS stabilization platform. Limited by different factors such as mechanical characteristic of the stabilization platform and bandwidth/noise of the sensor, the control bandwidth of LOS stabilization platform is restricted so that effective rejection of high frequency disturbance cannot be achieved as it mainly depends on the isolation characteristic of the platform itself. It is proposed by this paper that current loop may reject the effect of back-EMF. By adopting the method of electric control, high frequency isolation characteristic of the platform can be improved. The improvement effect is similar to increasing passive vibration reduction devices. Adopting the double closed loop control structure of velocity and current with the combining of the rejection effect of back-EMF caused by current loop is equivalent to reducing back-EMF coefficient, which can enhance the isolation ability of the LOS stabilization platform to high frequency disturbance.

  11. System dynamics research of remanufacturing closed-loop supply chain dominated by the third party.

    Science.gov (United States)

    Miao, Shidi; Wang, Tengfei; Chen, Deyun

    2017-01-01

    With the rapid development of the electronic information industry in recent years, electronic products are being updated faster and faster, and e-waste recycling has become a common problem around the world. Firstly, this article contrasts recycling at home and abroad using the predicament of Midea Corp. Based on a closed-loop supply chain with the system dynamics method, a model is constructed and simulated. In this model, the collection point coverage rate is introduced to adjust the e-waste recycling rate dynamically. Aiming at a recycling mode dominated by the third party of the closed-loop supply chain, the article mainly discusses the impact on the sales rate and market share of the recycling model by third-party enterprises and compares the total revenue of all supply chains. Simulation results show that the model is more effective and optimal than the traditional recycling model.

  12. Development and calibration of a MFM-based system for local hysteresis loops measurements

    Science.gov (United States)

    Coïsson, M.; Barrera, G.; Celegato, F.; Tiberto, P.

    2016-10-01

    A measurement technique derived from a field-dependent magnetic force microscope (MFM) is presented for the measurement of local hysteresis loops on patterned micrometric and sub-micrometric magnetic structures. The technique exploits the synchronisation of the applied field variations with the end-of-line signal of the microscope, while keeping the slow scan axis disabled. In this way, a single MFM image contains the whole field evolution of the magnetisation processes in the sample along a user-defined profile. An analysis procedure is presented for the subsequent determination of local hysteresis loops on magnetic dots. The system has been calibrated for what concerns the applied field values. No significant artifacts induced in the measurements by the applied field have been observed up to applied fields of ≈ 1000 Oe.

  13. Design and optimization of voice coil actuator for six degree of freedom active vibration isolation system using Halbach magnet array.

    Science.gov (United States)

    Kim, MyeongHyeon; Kim, Hyunchang; Gweon, Dae-Gab

    2012-10-01

    This paper describes the design, modeling, optimization, and validation of an active vibration isolation system using a voice coil motor. The active vibration isolating method was constructed with a passive isolator and an active isolator. A spring was used for passive isolating; an actuator was used for active isolating. The proposed active vibration isolation system (AVIS) can isolate disturbances for many kinds of instruments. Until now, developed AVIS were able to isolate a six degree-of-freedom disturbance effectively. This paper proposes the realization of such a six degree-of-freedom active vibration isolation system that can work as a bench top device for precision measuring machines such as atomic force microscope, scanning probe microscope, etc.

  14. MAGNETOHYDRODYNAMIC SEISMOLOGY OF A CORONAL LOOP SYSTEM BY THE FIRST TWO MODES OF STANDING KINK WAVES

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Y.; Hao, Q.; Cheng, X.; Chen, P. F.; Ding, M. D. [School of Astronomy and Space Science and Key Laboratory of Modern Astronomy and Astrophysics in Ministry of Education, Nanjing University, Nanjing 210046 (China); Erdélyi, R. [Solar Physics and Space Plasma Research Center (SP2RC), School of Mathematics and Statistics, University of Sheffield, Sheffield S3 7RH (United Kingdom); Srivastava, A. K.; Dwivedi, B. N., E-mail: guoyang@nju.edu.cn [Department of Physics, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India)

    2015-02-01

    We report the observation of the first two harmonics of the horizontally polarized kink waves excited in a coronal loop system lying southeast of AR 11719 on 2013 April 11. The detected periods of the fundamental mode (P {sub 1}), its first overtone (P {sub 2}) in the northern half, and that in the southern one are 530.2 ± 13.3, 300.4 ± 27.7, and 334.7 ± 22.1 s, respectively. The periods of the first overtone in the two halves are the same considering uncertainties in the measurement. We estimate the average electron density, temperature, and length of the loop system as (5.1 ± 0.8) × 10{sup 8} cm{sup –3}, 0.65 ± 0.06 MK, and 203.8 ± 13.8 Mm, respectively. As a zeroth-order estimation, the magnetic field strength, B = 8.2 ± 1.0 G, derived by the coronal seismology using the fundamental kink mode matches with that derived by a potential field model. The extrapolation model also shows the asymmetric and nonuniform distribution of the magnetic field along the coronal loop. Using the amplitude profile distributions of both the fundamental mode and its first overtone, we observe that the antinode positions of both the fundamental mode and its first overtone shift toward the weak field region along the coronal loop. The results indicate that the density stratification and the temperature difference effects are larger than the magnetic field variation effect on the period ratio. On the other hand, the magnetic field variation has a greater effect on the eigenfunction of the first overtone than the density stratification does for this case.

  15. Anti-hypertensive effects of a closed-loop chip system in renovascular hypertensive rats.

    Science.gov (United States)

    Zhou, Li-Min; Zhu, Guo-Qing; Wang, Han-Jun; Zhao, Cong-Kan; Xu, Yao; Gao, Xing-Ya

    2008-08-01

    The authors' previous study showed a closed-loop chip system that was used to control arterial pressure in normal rabbits and rats. In the present study the anti-hypertensive effects of the chip system were investigated in anaesthetized two-kidney one-clip (2K1C) renovascular hypertensive rats and compared with sham-operated rats. The chip system recorded, sampled, and processed the signals of arterial pressure and instantaneously controlled arterial pressure by stimulating the left aortic depressor nerve. The frequency of stimulation was determined according to the feedback signals of arterial pressure. The chip system, running three different programs, successfully achieved a different degree of depressor effects. It effectively decreased not only mean arterial pressure (MAP), but also renal sympathetic nerve activity (RSNA) in both 2K1C rats and sham-operated rats. The chip system significantly increased the baroreflex gain in the 2K1C rats, but not in the sham-operated rats. It normalized the increased left ventricle developing pressure and maximal rise rate of the left ventricle pressure (dP/dtmax) in the 2K1C rats. These results indicate that the depressor effect can be controlled by changing the programs of the chip system. The closed-loop chip system effectively decreased arterial pressure and sympathetic outflow, increased baroreflex gain, and normalized the enhanced cardiac contractility in renovascular hypertensive rats.

  16. Numerical Modeling of an Integrated Vehicle Fluids System Loop for Pressurizing a Cryogenic Tank

    Science.gov (United States)

    LeClair, A. C.; Hedayat, A.; Majumdar, A. K.

    2017-01-01

    This paper presents a numerical model of the pressurization loop of the Integrated Vehicle Fluids (IVF) system using the Generalized Fluid System Simulation Program (GFSSP). The IVF propulsion system, being developed by United Launch Alliance to reduce system weight and enhance reliability, uses boiloff propellants to drive thrusters for the reaction control system as well as to run internal combustion engines to develop power and drive compressors to pressurize propellant tanks. NASA Marshall Space Flight Center (MSFC) conducted tests to verify the functioning of the IVF system using a flight-like tank. GFSSP, a finite volume based flow network analysis software developed at MSFC, has been used to support the test program. This paper presents the simulation of three different test series, comparison of numerical prediction and test data and a novel method of presenting data in a dimensionless form. The paper also presents a methodology of implementing a compressor map in a system level code.

  17. Virtual unit delay for digital frequency adaptive T/4 delay phase-locked loop system

    DEFF Research Database (Denmark)

    Yang, Yongheng; Zhou, Keliang; Blaabjerg, Frede

    2016-01-01

    -controller/processor with a fixed sampling rate considering the cost and complexity, where the number of unit delays that have been adopted should be an integer. For instance, in conventional digital control systems, a single-phase T/4 Delay Phase-Locked Loop (PLL) system takes 50 unit delays (i.e., in a 50-Hz system...... Delay PLL system should be done in its implementation. This process will result in performance degradation in the digital control system, as the exactly required number of delays is not realized. Hence, in this paper, a Virtual Unit Delay (VUD) has been proposed to address such challenges to the digital...... T/4 Delay PLL system. The proposed VUD adopts linear interpolation polynomial to approximate the fractional delay induced by the varying grid frequency in such a way that the control performance is enhanced. The proposed VUD has been demonstrated on a digitally controlled T/4 Delay PLL system...

  18. Performance and Optimization for a Ground-Coupled Liquid Loop Heat Recovery Ventilation System

    Institute of Scientific and Technical Information of China (English)

    ZHOU Ya-su; Per FAHLEN; Torbj(o)rn LINDHOLM

    2007-01-01

    Ground-coupled heat pumps(GCHP) arecommonly used in residential heating system. To mitigatethe boreholes temperature dropping with operating time, anew exhaust-air recharging system is developed. The newrecharging system can be used in three operational modes.In this paper, a ground-coupled heat recovery ventilation(HRV) model is discussed. A thermal model is set up tofind the optimal brine flow rate and heat transfer allocationratio between exhaust and supply coils for maximum heatrecovery efficiency. Contrary to the conventional liquid-loopHRV systems, the brine temperature entering the exhaustcoil never goes blow zero(0℃), and hence defrosting isneedless in the ground-coupled HRV system. This can makethe ground-coupled HRV system over 20% more efficientthan a conventional HRV system at low outdoortemperatures.

  19. Multi-message Voice Record and Playback System Based on MOU%单片机的多段语音组合录放系统设计

    Institute of Scientific and Technical Information of China (English)

    温洪昌; 黄应强; 傅贵兴

    2011-01-01

    A kind of multi-message voice record and playback system is designed based on MCUSTC89C52RC and voice chip ISD1730, The paper introduces the process realization, including voice circuits design, multi-message voice recording, locating, editing and cornbi nation outputting. Also, a temperature measuring instrument with voice output function is produced. Experiments indicate that this in strument is easier to operate and use.%介绍一种基于单片机STC89C52RC、语音芯片ISD1730组成的多段语音录放系统设计方案。描述了语音电路设计、语音分段录入、语音段定位、语音段剪辑、多段语音组合输出等的实现方法;并制作了一个具有语音输出功能的温度测量仪。实验表明,具有语音输出功能的温度测量仪器更便于操作和使用。

  20. Research on the man in the loop control system of the robot arm based on gesture control

    Science.gov (United States)

    Xiao, Lifeng; Peng, Jinbao

    2017-03-01

    The Man in the loop control system of the robot arm based on gesture control research complex real-world environment, which requires the operator to continuously control and adjust the remote manipulator, as the background, completes the specific mission human in the loop entire system as the research object. This paper puts forward a kind of robot arm control system of Man in the loop based on gesture control, by robot arm control system based on gesture control and Virtual reality scene feedback to enhance immersion and integration of operator, to make operator really become a part of the whole control loop. This paper expounds how to construct a man in the loop control system of the robot arm based on gesture control. The system is a complex system of human computer cooperative control, but also people in the loop control problem areas. The new system solves the problems that the traditional method has no immersion feeling and the operation lever is unnatural, the adjustment time is long, and the data glove mode wears uncomfortable and the price is expensive.

  1. The design of a digital voice data compression technique for orbiter voice channels

    Science.gov (United States)

    1975-01-01

    Voice bandwidth compression techniques were investigated to anticipate link margin difficulties in the shuttle S-band communication system. It was felt that by reducing the data rate on each voice channel from the baseline 24 (or 32) Kbps to 8 Kbps, additional margin could be obtained. The feasibility of such an alternate voice transmission system was studied. Several factors of prime importance that were addressed are: (1) achieving high quality voice at 8 Kbps; (2) performance in the presence of the anticipated shuttle cabin environmental noise; (3) performance in the presence of the anticipated channel error statistics; and (4) minimal increase in size, weight, and power over the current baseline voice processor.

  2. Bifurcations of Limit Cycles in A Perturbed Quintic Hamiltonian System with Six Double Homoclinic Loops

    Institute of Scientific and Technical Information of China (English)

    Yong-xi Gao; Yu-hai Wu; Li-xin Tian

    2008-01-01

    This paper concerns with the number and distributions of limit cycles of a quintic subject to a seven-degree perturbation. With the aid of numeric integral computation provided by Mathematica 4.1, at least 45 limit cycles are found in the above system by applying the method of double homoclinic loops bifurcation,Hopf bifurcation and qualitative analysis. The four configurations of 45 limit cycles of the system are also shown.The results obtained are useful to the study of the weakened 16th Hilbert Problem.

  3. Controlling Unknown Saddle Type Steady States of Dynamical Systems with Latency in the Feedback Loop

    DEFF Research Database (Denmark)

    Tamasevicius, Arunas; Bumeliene, Skaidra; Tamaseviciute, Elena

    2009-01-01

    We suggest an adaptive control technique for stabilizing saddle type unstable steady states of dynamical systems. The controller is composed of an unstable and a stable high-pass filters operating in parallel. The mathematical model is considered analytically and numerically. The conjoint...... controller is sufficiently robust to time latencies in the feedback loop. In addition, it is not sensitive to the damping parameters of the system and is relatively fast. Experiments have been performed using a simplified version of the electronic Young-Silva circuit imitating behavior of the Duffing...

  4. Benchmarking of Phase Locked Loop based Synchronization Techniques for Grid-Connected Inverter Systems

    DEFF Research Database (Denmark)

    Yang, Yongheng; Hadjidemetriou, Lenos; Blaabjerg, Frede

    2015-01-01

    , becoming inevitable challenges to the synchronization of the grid-connected renewable energy systems. In order to ensure the quality of the power generation from the renewables, robust and reliable synchronization methods are in demand. Among the prior-art solutions, Phase Locked Loop (PLL) based...... synchronization methods have gained much popularity in grid-connected applications. However, an appropriate selection and thus a proper design of the selected PLL synchronization remain of interest in practice, especially for single-phase systems. Therefore, in this paper, a benchmarking of the main PLL...

  5. System-level simulation of a noisy phase-locked loop

    OpenAIRE

    Herzel, Frank; Piz, Maxim

    2005-01-01

    This paper presents a compact model of a noisy phase-locked loop (PLL) for inclusion in a time-domain system simulation. The phase noise of the reference is modeled as a Wiener process, and the phase noise contribution of the voltage-controlled oscillator (VCO) is described as an Ornstein-Uhlenbeck process. The model is applied to phase error modeling for a 60 GHz OFDM system including correction of the common phase error. A close agreement is observed between the time-domain simulation and a...

  6. Fuzzy PID controller combines with closed-loop optimal fuzzy reasoning for pitch control system

    Science.gov (United States)

    Li, Yezi; Xiao, Cheng; Sun, Jinhao

    2013-03-01

    PID and fuzzy PID controller are applied into the pitch control system. PID control has simple principle and its parameters setting are rather easy. Fuzzy control need not to establish the mathematical of the control system and has strong robustness. The advantages of fuzzy PID control are simple, easy in setting parameters and strong robustness. Fuzzy PID controller combines with closed-loop optimal fuzzy reasoning (COFR), which can effectively improve the robustness, when the robustness is special requirement. MATLAB software is used for simulations, results display that fuzzy PID controller which combines with COFR has better performances than PID controller when errors exist.

  7. FREQ: A computational package for multivariable system loop-shaping procedures

    Science.gov (United States)

    Giesy, Daniel P.; Armstrong, Ernest S.

    1989-01-01

    Many approaches in the field of linear, multivariable time-invariant systems analysis and controller synthesis employ loop-sharing procedures wherein design parameters are chosen to shape frequency-response singular value plots of selected transfer matrices. A software package, FREQ, is documented for computing within on unified framework many of the most used multivariable transfer matrices for both continuous and discrete systems. The matrices are evaluated at user-selected frequency-response values, and singular values against frequency. Example computations are presented to demonstrate the use of the FREQ code.

  8. Three-Loop Automatic of Control System the Landfill of Household Solid Waste

    Science.gov (United States)

    Sereda, T. G.; Kostarev, S. N.

    2017-05-01

    The analysis of models of governance ground municipal solid waste (MSW). Considered a distributed circuit (spatio-temporal) ground control model. Developed a dynamic model of multicontour control landfill. Adjustable parameters are defined (the ratio of CH4 CO2 emission/fluxes, concentrations of heavy metals ions) and control (purging array, irrigation, adding reagents). Based on laboratory studies carried out with the analysis of equity flows and procedures developed by the transferring matrix that takes into account the relationship control loops. A system of differential equations in the frequency and time domains. Given the numerical approaches solving systems of differential equations in finite differential form.

  9. 基于ARM的嵌入式语音存储系统设计%Design of Embedded Voice Storage System Based on ARM

    Institute of Scientific and Technical Information of China (English)

    于春雪

    2012-01-01

    In order to effectively save the transmission bandwidth of voice data and disk space of storage system, it needs to lower the encoding bit rate when ensuring the voice quality. The design uses optimized G. 729 voice compression encoding and decoding algorithm and ARM processor. The embedded voice storage systems can achieve mass storage of voice signals. It has fast processing speed, good reliability and convenient expansion. Through rigorous test and evaluation, the system achieves the compression and recording of large num- bers of voice data,and indicators reachs the expected level.%为了有效地节省语音数据的传输带宽和存储系统的磁盘空间,需要在保证语音质量的前提下尽可能降低其编码比特率。本设计采用经过优化的G.729语音压缩编译码算法,以ARM处理器为载体,开发的嵌入式语音存储系统可实现语音信号的海量存储,而且处理速度快、可靠性好、扩展方便。通过严格的测试和评估,该系统能够实现对大量语音数据的压缩和记录,各项指标基本达到了预期的水平。

  10. A cryogenic phase locking loop system for a superconducting integrated receiver

    Science.gov (United States)

    Khudchenko, A. V.; Koshelets, V. P.; Dmitriev, P. N.; Ermakov, A. B.; Yagoubov, P. A.; Pylypenko, O. M.

    2009-08-01

    The authors present a new cryogenic device, an ultrawideband cryogenic phase locking loop system (CPLL). The CPLL was developed for phase locking of a flux-flow oscillator (FFO) in a superconducting integrated receiver (SIR) but can be used for any cryogenic terahertz oscillator. The key element of the CPLL is the cryogenic phase detector (CPD), a recently proposed new superconducting element. The CPD is an innovative implementation of a superconductor-insulator-superconductor tunnel junction. All components of the CPLL reside inside a cryostat at 4.2 K, with the loop length of cables 50 cm and the total loop delay 4.5 ns. So small a delay results in a CPLL synchronization bandwidth as wide as 40 MHz and allows phase locking of more than 60% of the power emitted by the FFO, even for FFO linewidths of about 11 MHz. This percentage of phase locked power is three times that achieved with conventional room temperature PLLs. Such an improvement enables reducing the FFO phase noise and extending the SIR operation range.

  11. Multi-loop Control System Design for Biodiesel Process using Waste Cooking Oil

    Science.gov (United States)

    Patle, Dipesh S.; Z, Ahmad; Rangaiah, G. P.

    2015-06-01

    Biodiesel is one of the promising liquid fuels for future due to its advantages such as renewability and eco-friendliness. This manuscript describes the development of a multi-loop control system design for a comprehensive biodiesel process using waste cooking oil. Method for controlled variable-manipulated variable (CV-MV) pairings are vital for the stable, effective and economical operation of the process. Liquid recycles, product quality requirements and effective inventory control pose tough challenges to the safe operation of the biodiesel process. A simple and easy to apply effective RGA method [Xiong Q, Cai W J and He M J 2005 A practical loop pairing criterion for multivariable processes Journal of Process Control vol. 15 pp 741-747.] is applied to determine CV-MV pairings i.e. control configuration design for the bioprocess. This method uses steady state gain as well as bandwidth information of the process open loop transfer function to determine input-output pairings.

  12. A New GPS-based Digital Protection System for Smart Grids in Loop Structure

    Directory of Open Access Journals (Sweden)

    X. Liu

    2014-12-01

    Full Text Available This paper presents a new digital protection system to solve the protection challenges in future smart grids, i.e., fast protection and fault isolation in a loop-structured system with limited magnitude of fault current. The new system combines two protection algorithms, i.e., a differential protection as the primary algorithm and an overcurrent protection as the backup one. The new system uses real-time Ethernet and digital data acquisition techniques to overcome the restriction on data transmission over large grids. The current measurements at different locations are time-synchronized by GPS clocks, and then transmitted to a central computer via the Ethernet. As opposed to digital relays which often contain PMU functionality nowadays, this approach uses time stamps on the instantaneous current values. We build a prototype of the new system on a test-bed. The results from simulations and experiments have demonstrated that the protection system achieves fast and accurate protection.

  13. Practical applications of interactive voice technologies: Some accomplishments and prospects

    Science.gov (United States)

    Grady, Michael W.; Hicklin, M. B.; Porter, J. E.

    1977-01-01

    A technology assessment of the application of computers and electronics to complex systems is presented. Three existing systems which utilize voice technology (speech recognition and speech generation) are described. Future directions in voice technology are also described.

  14. System Accuracy Evaluation of the GlucoRx Nexus Voice TD-4280 Blood Glucose Monitoring System

    Directory of Open Access Journals (Sweden)

    Muhammad Khan

    2014-01-01

    Full Text Available Use of blood glucose (BG meters in the self-monitoring of blood glucose (SMBG significantly lowers the risk of diabetic complications. With several BG meters now commercially available, the International Organization for Standardization (ISO ensures that each BG meter conforms to a set degree of accuracy. Although adherence to ISO guidelines is a prerequisite for commercialization in Europe, several BG meters claim to meet the ISO guidelines yet fail to do so on internal validation. We conducted a study to determine whether the accuracy of the GlucoRx Nexus TD-4280 meter, utilized by our department for its cost-effectiveness, complied with ISO guidelines. 105 patients requiring laboratory blood glucose analysis were randomly selected and reference measurements were determined by the UniCel DxC 800 clinical system. Overall the BG meter failed to adhere to the ≥95% accuracy criterion required by both the 15197:2003 (overall accuracy 92.4% and 15197:2013 protocol (overall accuracy 86.7%. Inaccurate meters have an inherent risk of over- and/or underestimating the true BG concentration, thereby risking patients to incorrect therapeutic interventions. Our study demonstrates the importance of internally validating the accuracy of BG meters to ensure that its accuracy is accepted by standardized guidelines.

  15. Modular Reversibility Analysis in Self-loops Connections of Petri Net Systems

    Directory of Open Access Journals (Sweden)

    Fei Pu

    2013-02-01

    Full Text Available It is well known that the use of a modular approach for modeling has many advantages: it allows the modeler to consider different parts of the model independently of one another. A modular approach to analysis is also attractive: it often dramatically decreases the complexity of the analysis task. To create Petri net models of large systems, four bottom-up techniques, consisting of sharing operation, synchronous operation, self-loops connection as well as inhibitor-arc connection, have been developed. This paper focus on the concurrent behavior relation in self-loops connections of Petri net systems. First, for the property of dynamic invariance we show that it is possible to decide dynamic invariance of the global system from invariance of the individual modules. Second, for reversibility property we show that it is possible to construct reversibility of total modular system from reversibility of the individual modules without unfolding to the entire state space. Finally, we present some examples to illustrate the effectiveness of our approaches. The advantages of our approaches are in the context of concurrent language and can synthesize Petri net systems beyond asymmetric choice nets.

  16. Response Current from Spin-Vortex-Induced Loop Current System to Feeding Current

    Science.gov (United States)

    Morisaki, Tsubasa; Wakaura, Hikaru; Abou Ghantous, Michel; Koizumi, Hiroyasu

    2017-07-01

    The spin-vortex-induced loop current (SVILC) is a loop current generated around a spin-vortex formed by itinerant electrons. It is generated by a U(1) instanton created by the single-valued requirement of wave functions with respect to the coordinate, and protected by the topological number, "winding number". In a system with SVILCs, a macroscopic persistent current is generated as a collection of SVILCs. In the present work, we consider the situation where external currents are fed in the SVILC system and response currents are measured as spontaneous currents that flow through leads attached to the SVILC system. The response currents from SVILC systems are markedly different from the feeding currents in their directions and magnitude, and depend on the original current pattern of the SVILC system; thus, they may be used in the readout process in the recently proposed SVILC quantum computer, a quantum computer that utilizes SVILCs as qubits. We also consider the use of the response current to detect SVILCs.

  17. Fibre Monitoring System for the Beam Permit Loops at the LHC and Future Evolution of the Beam Interlock System

    CERN Document Server

    García-Argos, Carlos; Gabourin, Stéphane; Martin, Christophe; Puccio, Bruno; Siemko, Andrzej P.

    2015-01-01

    The optical fibres that transmit the beam permit loop signals at the CERN accelerator complex are deployed along radiation areas. This may result in increased attenuation of the fibres, which reduces the power margin of the links. In addition, other events may cause the links to not function properly and result in false dumps, reducing the availability of the accelerator chain and affecting physics data taking. In order to evaluate the state of the fibres, an out-of-band fibre monitoring system is proposed, working in parallel to the actual beam permit loops. The future beam interlock system to be deployed during LHC long shutdown 2 will implement online, real-time monitoring of the fibres, a feature the current system lacks. Commercial off-the-shelf components to implement the optical transceivers are proposed whenever possible instead of ad-hoc designs.

  18. Fuzzy cognitive maps outmatch loop analysis in dynamic modeling of ecological systems

    Directory of Open Access Journals (Sweden)

    Alessandro Ferrarini

    2011-04-01

    Full Text Available Modeling natural systems is challenging due to their complexity in terms of variables, interactions, and dynamics. Much of this complexity is rooted in the existence of multiple ways through which acting variables affect each other. Besides the simple direct effects, numerous indirect effects emerge in ecological systems. Through an illustrative example, I exemplify here several advantages of fuzzy cognitive maps (FCM over loop analysis (LA in dynamic modeling of ecological systems. In addition to being able to incorporate information about the magnitude of variables interactions, FCM can make predictions about multiple simultaneous perturbations. Furthermore, FCM allow for the simulation of different magnitude of initial perturbations to the system. Last, FCM estimate the amount of variable increase/decrease, not just the likely direction of change. Hence, even if LA is still much more used than FCM in the scientific literature, FCM can be considered fitter than LA in modeling ecological systems.

  19. Efficacy of a New Medical Information system, Ubiquitous Healthcare Service with Voice Inception Technique in Elderly Diabetic Patients.

    Science.gov (United States)

    Kim, Kyoung Min; Park, Kyeong Seon; Lee, Hyun Ju; Lee, Yun Hee; Bae, Ji Seon; Lee, Young Joon; Choi, Sung Hee; Jang, Hak Chul; Lim, Soo

    2015-12-11

    We have demonstrated previously that an individualized health management system using advanced medical information technology, named ubiquitous (u)-healthcare, was helpful in achieving better glycemic control than routine care. Recently, we generated a new u-healthcare system using a voice inception technique for elderly diabetic patients to communicate information about their glucose control, physical activity, and diet more easily. In a randomized clinical trial, 70 diabetic patients aged 60-85 years were assigned randomly to a standard care group or u-healthcare group for 6 months. The primary end points were the changes in glycated hemoglobin (HbA1c) and glucose fluctuation assessed by the mean amplitude glycemic excursion (MAGE). Changes in body weight, lifestyle, and knowledge about diabetes were also investigated. After 6 months, the HbA1c levels decreased significantly in the u-healthcare group (from 8.6 ± 1.0% to 7.5 ± 0.6%) compared with the standard care group (from 8.7 ± 0.9% to 8.2 ± 1.1%, P < 0.01). The MAGE decreased more in the u-healthcare group than in the standard care group. Systolic blood pressure and body weight decreased and liver functions improved in the u-healthcare group, but not in the standard care group. The u-healthcare system with voice inception technique was effective in achieving glycemic control without hypoglycemia in elderly diabetic patients (Clinicaltrials.gov: NCT01891474).

  20. Closed-loop helium circulation system for actuation of a continuously operating heart catheter pump.

    Science.gov (United States)

    Karabegovic, Alen; Hinteregger, Markus; Janeczek, Christoph; Mohl, Werner; Gföhler, Margit

    2017-06-09

    Currently available, pneumatic-based medical devices are operated using closed-loop pulsatile or open continuous systems. Medical devices utilizing gases with a low atomic number in a continuous closed loop stream have not been documented to date. This work presents the construction of a portable helium circulation addressing the need for actuating a novel, pneumatically operated catheter pump. The design of its control system puts emphasis on the performance, safety and low running cost of the catheter pump. Static and dynamic characteristics of individual elements in the circulation are analyzed to ensure a proper operation of the system. The pneumatic circulation maximizes the working range of the drive unit inside the catheter pump while reducing the total size and noise production.Separate flow and pressure controllers position the turbine's working point into the stable region of the pressure creation element. A subsystem for rapid gas evacuation significantly decreases the duration of helium removal after a leak, reaching subatmospheric pressure in the intracorporeal catheter within several milliseconds. The system presented in the study offers an easy control of helium mass flow while ensuring stable behavior of its internal components.

  1. Continuous Drug Infusion for Diabetes Therapy: A Closed-Loop Control System Design

    Directory of Open Access Journals (Sweden)

    Jiming Chen

    2008-03-01

    Full Text Available While a typical way for diabetes therapy is discrete insulin infusion based on long-time interval measurement, in this paper, we design a closed-loop control system for continuous drug infusion to improve the traditional discrete methods and make diabetes therapy automatic in practice. By exploring the accumulative function of drug to insulin, a continuous injection model is proposed. Based on this model, proportional-integral-derivative (PID and fuzzy logic controllers are designed to tackle a control problem of the resulting highly nonlinear plant. Even with serious disturbance of glucose, such as nutrition absorption at meal time, the proposed scheme can perform well in simulation experiments.

  2. Continuous Drug Infusion for Diabetes Therapy: A Closed-Loop Control System Design

    Directory of Open Access Journals (Sweden)

    Xiao Yang

    2008-01-01

    Full Text Available Abstract While a typical way for diabetes therapy is discrete insulin infusion based on long-time interval measurement, in this paper, we design a closed-loop control system for continuous drug infusion to improve the traditional discrete methods and make diabetes therapy automatic in practice. By exploring the accumulative function of drug to insulin, a continuous injection model is proposed. Based on this model, proportional-integral-derivative (PID and fuzzy logic controllers are designed to tackle a control problem of the resulting highly nonlinear plant. Even with serious disturbance of glucose, such as nutrition absorption at meal time, the proposed scheme can perform well in simulation experiments.

  3. Phase-dependent inversionless gain in a four-level atomic system with a closed interaction loop

    Institute of Scientific and Technical Information of China (English)

    Xu Wei-Hua; Wu Jin-Hui; Gao Jin-Yue

    2007-01-01

    A four-level atomic system with a closed interaction loop connected by two coherent driving fields and a microwave field is investigated. The results show that inversionless gain can be achieved on a higher frequency transition outside the closed interaction loop, and the gain behaviour can be modulated by the phase of the closed loop as well as the amplitude of the microwave field. The phase sensitivity property in such a scheme is similar to that in an analogous configuration with spontaneously generated coherence, but it is beyond the rigorous condition of near-degenerate levels with non-orthogonal dipole moments. Therefore this scheme is much more convenient in experimental realization.

  4. Fuzzy droop control loops adjustment for stored energy balance in distributed energy storage system

    DEFF Research Database (Denmark)

    Aldana, Nelson Leonardo Diaz; Wu, Dan; Dragicevic, Tomislav;

    2015-01-01

    The study of isolated AC microgrid has been under high interest due to the integration of renewable energy resources especially for remote areas, or to improve the local energy reliability. The current trend is oriented to distributed renewable energy sources and their corresponding energy storage...... system, in order to smooth the variations at the prime energy generator. In this paper, a decentralized strategy based on fuzzy logic is proposed in order to balance the state of charge of distributed energy storage systems in lowvoltage three phase AC microgrid. The proposed method weights the action...... of conventional droop control loops for battery based distributed energy storage systems, in order to equalize their stored energy. The units are selfcontrolled by using local variables, hence, the microgrid can operate without communication systems. Frequency and voltage bus signaling are used in order...

  5. Analysis of Middle Frequency Resonance in DFIG System Considering Phase Locked Loop

    DEFF Research Database (Denmark)

    Song, Yipeng; Blaabjerg, Frede

    2017-01-01

    compensated weak network. Besides these two resonances, a Middle Frequency Resonance (MFR) between 200 Hz and 800 Hz may appear when the Phase Locked Loop (PLL) with fast control dynamics is applied. In order to analyze the MFR, the DFIG system impedance considering the PLL is studied based on the Vector...... Oriented Control (VOC) strategy in Rotor Side Converter (RSC) and Grid Side Converter (GSC). On the basis of the established impedance modeling of the DFIG system, it is found that the PLL with fast control dynamics may result in the occurrence of MFR due to a decreasing phase margin. The simulation...... results of both a 7.5 kW small scale DFIG system and a 2 MW large scale DFIG system are provided to validate the theoretical analysis of the MFR....

  6. Pilot-in-the-Loop Analysis of Propulsive-Only Flight Control Systems

    Science.gov (United States)

    Chou, Hwei-Lan; Biezad, Daniel J.

    1996-01-01

    Longitudinal control system architectures are presented which directly couple flight stick motions to throttle commands for a multi-engine aircraft. This coupling enables positive attitude control with complete failure of the flight control system. The architectures chosen vary from simple feedback gains to classical lead-lag compensators with and without prefilters. Each architecture is reviewed for its appropriateness for piloted flight. The control systems are then analyzed with pilot-in-the-loop metrics related to bandwidth required for landing. Results indicate that current and proposed bandwidth requirements should be modified for throttles only flight control. Pilot ratings consistently showed better ratings than predicted by analysis. Recommendations are made for more robust design and implementation. The use of Quantitative Feedback Theory for compensator design is discussed. Although simple and effective augmented control can be achieved in a wide variety of failed configurations, a few configuration characteristics are dominant for pilot-in-the-loop control. These characteristics will be tested in a simulator study involving failed flight controls for a multi-engine aircraft.

  7. An Approach to Polynomial NARX/NARMAX Systems Identification in a Closed-loop with Variable Structure Control

    Institute of Scientific and Technical Information of China (English)

    O. M. Mohamed Vall; R. M'hiri

    2008-01-01

    Many physical processes have nonlinear behavior which can be well represented by a polynomial NARX or NARMAX model. The identification of such models has been widely explored in literature. The majority of these approaches are for the open-loop identification. However, for reasons such as safety and production restrictions, open-loop identification cannot always be done. In such cases, closed-loop identification is necessary. This paper presents a two-step approach to closed-loop identification of the polynomial NARX/NARMAX systems with variable structure control (VSC). First, a genetic algorithm (GA) is used to maximize the similarity of VSC signal to white noise by tuning the switching function parameters. Second, the system is simulated again and its parameters are estimated by an algorithm of the least square (LS) family. Finally, simulation examples are given to show the validity of the proposed approach.

  8. Cryogenic Phase-Locking Loop System Based on SIS Tunnel Junction

    Science.gov (United States)

    Khudchenko, A. V.; Koshelets, V. P.; Kalashnikov, K. V.

    An ultra-wideband cryogenic phase-locking loop (CPLL) system is a new cryogenic device. The CPLL is intended for phase-locking of a Flux-Flow Oscillator (FFO) in a Superconducting Integrated Receiver (SIR) but can be used for any cryogenic terahertz oscillator. The key element of the CPLL is Cryogenic Phase Detector (CPD), a recently proposed new superconducting element. The CPD is an innovative implementation of superconductor-insulator-superconductor (SIS) tunnel junction. All components of the CPLL reside inside a cryostat at 4.2 K, with the loop length of about 50 cm and the total loop delay 5.5 ns. Such a small delay results in CPLL synchronization bandwidth as wide as 40 MHz and allows phase-locking of more than 60% of the power emitted by the FFO even for FFO linewidth of about 10 MHz. This percentage of phase-locked power three times exceeds that achieved with conventional room-temperature PLLs. Such an improvement enables reducing the FFO phase noise and extending the SIR operation range.Another new approach to the FFO phase-locking has been proposed and experimentally verified. The FFO has been synchronized by a cryogenic harmonic phase detector (CHPD) based on the SIS junction. The CHPD operates simultaneously as the harmonic mixer (HM) and phase detector. We have studied the HM based on the SIS junction theoretically; in particular we calculated 3D dependences of the HM output signal power versus the bias voltage and the LO power. Results of the calculations have been compared with experimental measurements. Good qualitative and quantitative correspondence has been achieved. The FFO phase-locking by the CHPD has been demonstrated. Such a PLL system is expected to be extra wideband. This concept is very promising for building of the multi-pixel SIR array.

  9. Keyboard With Voice Output

    Science.gov (United States)

    Huber, W. C.

    1986-01-01

    Voice synthesizer tells what key is about to be depressed. Verbal feedback useful for blind operators or where dim light prevents sighted operator from seeing keyboard. Also used where operator is busy observing other things while keying data into control system. Used as training aid for touch typing, and to train blind operators to use both standard and braille keyboards. Concept adapted to such equipment as typewriters, computers, calculators, telephones, cash registers, and on/off controls.

  10. Suggestions for Layout and Functional Behavior of Software-Based Voice Switch Keysets

    Science.gov (United States)

    Scott, David W.

    2010-01-01

    Marshall Space Flight Center (MSFC) provides communication services for a number of real time environments, including Space Shuttle Propulsion support and International Space Station (ISS) payload operations. In such settings, control team members speak with each other via multiple voice circuits or loops. Each loop has a particular purpose and constituency, and users are assigned listen and/or talk capabilities for a given loop based on their role in fulfilling the purpose. A voice switch is a given facility's hardware and software that supports such communication, and may be interconnected with other facilities switches to create a large network that, from an end user perspective, acts like a single system. Since users typically monitor and/or respond to several voice loops concurrently for hours on end and real time operations can be very dynamic and intense, it s vital that a control panel or keyset for interfacing with the voice switch be a servant that reduces stress, not a master that adds it. Implementing the visual interface on a computer screen provides tremendous flexibility and configurability, but there s a very real risk of overcomplication. (Remember how office automation made life easier, which led to a deluge of documents that made life harder?) This paper a) discusses some basic human factors considerations related to keysets implemented as application software windows, b) suggests what to standardize at the facility level and what to leave to the user's preference, and c) provides screen shot mockups for a robust but reasonably simple user experience. Concepts apply to keyset needs in almost any type of operations control or support center.

  11. Fibre Optic Bus Network For Voice And Data Transmission In A Ship

    Science.gov (United States)

    Jhunjhunwala, Ashok; Sanghi, R. K.; Manjunath, D.

    1987-12-01

    A versatile communication system in a ship with 120 stations, each having voice and data transmission is envisaged. The proposed fibre optic network has a bus topology ideally suited for distribution in ship-like environment. Use has been made of standard ETHERNET chip sets manufactured by INTEL. This makes the stations compact, easier to maintain and inexpensive. The ETHERNET proto-col is primarily designed for packet data transmission. The collision detection and backoff protocol makes the packet transmission probabilistic and is therefore not suitable for voice transmission. This problem is overcome in the present design by a scheme where the required number of voice slots are dynamically allocated. That is, having established a connection for voice communication between stations, fixed slots are assigned for voice transmission and reception. The data transmission continues to use CSMA/CD Protocol. A simple hardware addition to the ETHERNET chip set makes the scheme workable. Drops in the fiber optic bus network is through passive star couplers. Four to eight star couplers are used in the present scheme with repeaters between adjacent star couplers. The repeaters will not be usual repeaters, as ordinary repeaters would cause loops to be formed between adjacent stars, thereby causing data to recirculate. This recirculation is avoided by making the repeater intelligent and also performing the task of detecting collisions between signals originating from stations connected to different star couplers.

  12. Analysis of Applicability of ISO 9564 PIN based Authentication to Closed-Loop Mobile Payment Systems

    OpenAIRE

    Amal Saha; Sugata Sanyal

    2014-01-01

    Payment transactions initiated through a mobile device are growing and security concerns must be addressed. People coming from payment card industry often talk passionately about porting ISO 9564 PIN standard based authentication in open-loop card payment to closed-loop mobile financial transactions and certification of closed-loop payment product or solution against this standard. In reality, so far this standard has not been adopted in closed-loop mobile payment authentication and applicabi...

  13. Psychometric assessments of life quality and voice for teachers within the municipal system, in Bauru, SP, Brazil

    Directory of Open Access Journals (Sweden)

    Janaína Gheissa Martinello

    2011-12-01

    Full Text Available Studies show a high prevalence of vocal alterations among teachers. One of the criteria for the establishment of the prevalence of vocal alteration is based on teachers' self-perception. Objective: This study aimed at comparing voice-disordered quality of life measures between a group of teachers who reported vocal alteration and a group of teachers who did not, by verifying the teachers' perception regarding the impact of vocal alteration in the different dimensions of voice quality of life. Material and Methods: Ninety-seven (97 teachers answered three psychometric protocols of voice quality of life: Voice Handicap Index (VHI, Voice-Related Quality of Life (V-RQOL, and the Voice Activity Participation Profile (VAPP, in addition to a questionnaire for characterization of the sample. Results: The results were that 39.8% of the teachers reported vocal alteration. When comparing voice measures between the groups (with and without vocal alteration, statistically significant differences were observed: the total score of VHI, total score of V-RQOL and total score of VAAP and its dimensions. It was also verified that the physical dimension of VHI has a greater impact among the dimensions of this protocol. For VRQOL, the most striking dimension was the physical functioning domain, both indicating the laryngeal discomfort and the impact of voice on communication, in teachers with and without complaints. As for VAAP, no domain prevailed over the others in the group with no complaints. For teachers with complaints, three domains, i.e., daily communication, work, and emotions have a greater impact than social communication. The limitation and restriction scores were calculated as well, and it was observed the limitation of activities is greater than the restriction of activities, both in the group with and the group without complaints. Conclusion: One may conclude that the teachers who reported vocal alterations better realize the impact of voice in

  14. Stabilization loop of a two axes gimbal system using self-tuning PID type fuzzy controller.

    Science.gov (United States)

    Abdo, Maher Mahmoud; Vali, Ahmad Reza; Toloei, Ali Reza; Arvan, Mohammad Reza

    2014-03-01

    The application of inertial stabilization system is to stabilize the sensor's line of sight toward a target by isolating the sensor from the disturbances induced by the operating environment. The aim of this paper is to present two axes gimbal system. The gimbals torque relationships are derived using Lagrange equation considering the base angular motion and dynamic mass unbalance. The stabilization loops are constructed with cross coupling unit utilizing proposed fuzzy PID type controller. The overall control system is simulated and validated using MATLAB. Then, the performance of proposed controller is evaluated comparing with conventional PI controller in terms of transient response analysis and quantitative study of error analysis. The simulation results obtained in different conditions prove the efficiency of the proposed fuzzy controller which offers a better response than the classical one, and improves further the transient and steady-state performance.

  15. Conceptualization and validation of an open-source closed-loop deep brain stimulation system in rat.

    Science.gov (United States)

    Wu, Hemmings; Ghekiere, Hartwin; Beeckmans, Dorien; Tambuyzer, Tim; van Kuyck, Kris; Aerts, Jean-Marie; Nuttin, Bart

    2015-04-21

    Conventional deep brain stimulation (DBS) applies constant electrical stimulation to specific brain regions to treat neurological disorders. Closed-loop DBS with real-time feedback is gaining attention in recent years, after proved more effective than conventional DBS in terms of pathological symptom control clinically. Here we demonstrate the conceptualization and validation of a closed-loop DBS system using open-source hardware. We used hippocampal theta oscillations as system input, and electrical stimulation in the mesencephalic reticular formation (mRt) as controller output. It is well documented that hippocampal theta oscillations are highly related to locomotion, while electrical stimulation in the mRt induces freezing. We used an Arduino open-source microcontroller between input and output sources. This allowed us to use hippocampal local field potentials (LFPs) to steer electrical stimulation in the mRt. Our results showed that closed-loop DBS significantly suppressed locomotion compared to no stimulation, and required on average only 56% of the stimulation used in open-loop DBS to reach similar effects. The main advantages of open-source hardware include wide selection and availability, high customizability, and affordability. Our open-source closed-loop DBS system is effective, and warrants further research using open-source hardware for closed-loop neuromodulation.

  16. A meta-analysis of in-vehicle and nomadic voice-recognition system interaction and driving performance.

    Science.gov (United States)

    Simmons, Sarah M; Caird, Jeff K; Steel, Piers

    2017-09-01

    Driver distraction is a growing and pervasive issue that requires multiple solutions. Voice-recognition (V-R) systems may decrease the visual-manual (V-M) demands of a wide range of in-vehicle system and smartphone interactions. However, the degree that V-R systems integrated into vehicles or available in mobile phone applications affect driver distraction is incompletely understood. A comprehensive meta-analysis of experimental studies was conducted to address this knowledge gap. To meet study inclusion criteria, drivers had to interact with a V-R system while driving and doing everyday V-R tasks such as dialing, initiating a call, texting, emailing, destination entry or music selection. Coded dependent variables included detection, reaction time, lateral position, speed and headway. Comparisons of V-R systems with baseline driving and/or a V-M condition were also coded. Of 817 identified citations, 43 studies involving 2000 drivers and 183 effect sizes (r) were analyzed in the meta-analysis. Compared to baseline, driving while interacting with a V-R system is associated with increases in reaction time and lane positioning, and decreases in detection. When V-M systems were compared to V-R systems, drivers had slightly better performance with the latter system on reaction time, lane positioning and headway. Although V-R systems have some driving performance advantages over V-M systems, they have a distraction cost relative to driving without any system at all. The pattern of results indicates that V-R systems impose moderate distraction costs on driving. In addition, drivers minimally engage in compensatory performance adjustments such as reducing speed and increasing headway while using V-R systems. Implications of the results for theory, design guidelines and future research are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Precision Closed-Loop Orbital Maneuvering System Design and Performance for the Magnetospheric Multiscale Formation

    Science.gov (United States)

    Chai, Dean J.; Queen, Steven Z.; Placanica, Samuel J.

    2015-01-01

    NASAs Magnetospheric Multiscale (MMS) mission successfully launched on March 13,2015 (UTC) consists of four identically instrumented spin-stabilized observatories that function as a constellation to study magnetic reconnection in space. The need to maintain sufficiently accurate spatial and temporal formation resolution of the observatories must be balanced against the logistical constraints of executing overly-frequent maneuvers on a small fleet of spacecraft. These two considerations make for an extremely challenging maneuver design problem. This paper focuses on the design elements of a 6-DOF spacecraft attitude control and maneuvering system capable of delivering the high-precision adjustments required by the constellation designers specifically, the design, implementation, and on-orbit performance of the closed-loop formation-class maneuvers that include initialization, maintenance, and re-sizing. The maneuvering control system flown on MMS utilizes a micro-gravity resolution accelerometer sampled at a high rate in order to achieve closed-loop velocity tracking of an inertial target with arc-minute directional and millimeter-per second magnitude accuracy. This paper summarizes the techniques used for correcting bias drift, sensor-head offsets, and centripetal aliasing in the acceleration measurements. It also discusses the on-board pre-maneuver calibration and compensation algorithms as well as the implementation of the post-maneuver attitude adjustments.

  18. Study on a Closed-Loop Air-Fuel Control System of Gasoline Engines by Simulation

    Institute of Scientific and Technical Information of China (English)

    张付军; 赵长禄; 黄英; 郝利军

    2003-01-01

    In order to study the factors that influence the air-fuel ratio(A/F), the amplitude and frequency of A/F fluctuation, to reform the control strategy, and to improve the efficiency of three-way catalyst(TWC), a model of closed-loop control system including the engine, air-fuel mixing and transportation, oxygen sensor and controller, etc., is developed. Various factors that influence the A/F control are studied by simulation. The simulation results show that the reference voltage of oxygen sensor will influence the mean value of A/F ratio, the controller parameters will influence the amplitude of A/F fluctuation, and the operating conditions of the engine determine the frequency of A/F fluctuations, the amplitude of A/F fluctuation can be reduced to within demanded values by logical selection of the signal acquisition method and controller parameters. Higher A/F fluctuation frequency under high speed and load can be reduced through software delay in the controller. The A/F closed-loop control system based on the simulation results, accompanied with a rare-earth element TWC, gives a better efficiency of conversion against harmful emissions.

  19. Multipath/RFI/modulation study for DRSS-RFI problem: Voice coding and intelligibility testing for a satellite-based air traffic control system

    Science.gov (United States)

    Birch, J. N.; Getzin, N.

    1971-01-01

    Analog and digital voice coding techniques for application to an L-band satellite-basedair traffic control (ATC) system for over ocean deployment are examined. In addition to performance, the techniques are compared on the basis of cost, size, weight, power consumption, availability, reliability, and multiplexing features. Candidate systems are chosen on the bases of minimum required RF bandwidth and received carrier-to-noise density ratios. A detailed survey of automated and nonautomated intelligibility testing methods and devices is presented and comparisons given. Subjective evaluation of speech system by preference tests is considered. Conclusion and recommendations are developed regarding the selection of the voice system. Likewise, conclusions and recommendations are developed for the appropriate use of intelligibility tests, speech quality measurements, and preference tests with the framework of the proposed ATC system.

  20. Hardware-in-the-Loop Simulation of Distributed Intelligent Energy Management System for Microgrids

    Directory of Open Access Journals (Sweden)

    Dong-Jun Won

    2013-07-01

    Full Text Available Microgrids are autonomous low-voltage power distribution systems that contain multiple distributed energy resources (DERs and smart loads that can provide power system operation flexibility. To effectively control and coordinate multiple DERs and loads of microgrids, this paper proposes a distributed intelligent management system that employs a multi-agent-based control system so that delicate decision-making functions can be distributed to local intelligent agents. This paper presents the development of a hardware-in-the-loop simulation (HILS system for distributed intelligent management system for microgrids and its promising application to an emergency demand response program. In the developed HILS system, intelligent agents are developed using microcontrollers and ZigBee wireless communication technology. Power system dynamic models are implemented in real-time simulation environments using the Opal-RT system. This paper presents key features of the data communication and management schemes based on multi-agent concepts. The performance of the developed system is tested for emergency demand response program applications.

  1. 基于ADPCM的数字语音存储与回放系统%Digital voice storage and replay system based on ADPCM

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    With singlechip and FPGA as the cybernetics core,the system realizes voice storage and reply system. It can collect and simulate voice signals and stereo signals from earphone and lift utilization rate of memory by the use of ADPCM, which means the voice can be stored for more than 2 minutes. Based on the short⁃time Fourier transform principle,it can also achieve spectral analysis of voice signals and real⁃time display. Through using the stereo audio amplifier,each sound track can be adjusted and muted. Furthermore,some measures as pre⁃emphasis,de⁃emphasis and anti⁃aliasing filtering are used in this system to increase SNR efficiently and get good quality of the recorded voice for a longer time.%  系统以单片机和FPGA为控制核心,实现了语音存储与回放系统。能够采集模拟语音信号以及耳机立体声信号,以ADPCM(自适应差分编码)的方式提高了存储器的利用率,语音存储时间可达2 min;基于短时傅里叶变换原理,实现了语音信号的频谱分析与实时显示。同时,利用立体声音频功放播放语音,每声道音量可调并具有静噪功能。此外,系统还采用预加重、去加重、抗混叠滤波等措施,有效地提高了信噪比。语音回放质量良好,存储时间较长。

  2. Using the Voice to Design Ceramics

    DEFF Research Database (Denmark)

    Hansen, Flemming Tvede; Jensen, Kristoffer

    2011-01-01

    SoundShaping, a system to create ceramics from the human voice. Based on a generic audio feature extraction system, and the principal component analysis to ensure that the pertinent information in the voice is used, a 3D shape is created using simple geometric rules. This shape is output to a 3D printer...

  3. Using the Voice to Design Ceramics

    DEFF Research Database (Denmark)

    Hansen, Flemming Tvede; Jensen, Kristoffer

    2011-01-01

    SoundShaping, a system to create ceramics from the human voice. Based on a generic audio feature extraction system, and the principal component analysis to ensure that the pertinent information in the voice is used, a 3D shape is created using simple geometric rules. This shape is output to a 3D printer...

  4. The perturbative construction of the effective soft-spin Hamiltonian of the system of magnetized nano-loops

    Science.gov (United States)

    Horváth, D.; Gmitra, M.; Balá, P.

    2004-12-01

    The effective large-scale Hamiltonian of a planar system of nano-loops in a weakly excited flux-closed magnetized state has been constructed by means of a perturbative technique based on micromagnetic theory. The Hamiltonian is written by means of two classes of collective variables: the continuous soft spins and discrete vorticity charges. Analytical and numerical calculations of the inter-loop magnetostatic energy are compared for a pair of magnetic nano-loops. The transformation from small-scale to collective variables is performed for intra-loop exchange-coupling, magnetostatic and Zeeman energy terms. Evidence of correlations of uniform vortex charges in low-energy configurations is uncovered numerically. The generalization of the perturbative method that deals with more realistic out-of-plane excitations is also considered.

  5. Speaking and Nonspeaking Voice Professionals: Who Has the Better Voice?

    Science.gov (United States)

    Chitguppi, Chandala; Raj, Anoop; Meher, Ravi; Rathore, P K

    2017-04-18

    Voice professionals can be classified into two major subgroups: the primarily speaking and the primarily nonspeaking voice professionals. Nonspeaking voice professionals mainly include singers, whereas speaking voice professionals include the rest of the voice professionals. Although both of these groups have high vocal demands, it is currently unknown whether both groups show similar voice changes after their daily voice use. Comparison of these two subgroups of voice professionals has never been done before. This study aimed to compare the speaking voice of speaking and nonspeaking voice professionals with no obvious vocal fold pathology or voice-related complaints on the day of assessment. After obtaining relevant voice-related history, voice analysis and videostroboscopy were performed in 50 speaking and 50 nonspeaking voice professionals. Speaking voice professionals showed significantly higher incidence of voice-related complaints as compared with nonspeaking voice professionals. Voice analysis revealed that most acoustic parameters including fundamental frequency, jitter percent, and harmonic-to-noise ratio were significantly higher in speaking voice professionals, whereas videostroboscopy did not show any significant difference between the two groups. This is the first study of its kind to analyze the effect of daily voice use in the two subgroups of voice professionals with no obvious vocal fold pathology. We conclude that voice professionals should not be considered as a homogeneous group. The detrimental effects of excessive voice use were observed to occur more significantly in speaking voice professionals than in nonspeaking voice professionals. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  6. CCNA Voice Study Guide, Exam 640-460

    CERN Document Server

    Froehlich, Andrew

    2010-01-01

    The ultimate guide to the new CCNA voice network administrator certification exam. The new CCNA Voice exam tests candidates on their ability to implement a Cisco VoIP solution. Network administrators of voice systems will appreciate that the CCNA Voice Study Guide focuses completely on the information required by the exam. Along with hands-on labs and an objective map showing where each objective is covered, this guide includes a CD with the Sybex Test Engine, flashcards, and entire book in PDF format.: The new CCNA Voice certification will be valuable for administrators of voice network syste

  7. Analysis of Design of Sodium Reception and Secondary Loop Sodium Plugging and Removal System for Fast Reactor

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Through comparison of sodium reception and secondary loop sodium plugging and removal system on CEFR with BN-800, the main difference of the two designs is as follows: 1) System division is different. BN-800 can be divided into sodium reception system,

  8. Development of spin coater with close loop control system using ATMega8535 microcontroller

    Science.gov (United States)

    Pratama, Iqbal; Mindara, Jajat Yuda; Maulana, Dwindra W.; Panatarani, C.; Joni, I. Made

    2016-02-01

    Spin coater usually applied in preparation of a thin layer in industrial coatings and advanced material functionalization in various applications. This paper reports the development of spin coater with a closed loop control system using ATMega8535 microcontroller. The thickness of the thin film layer depend on the rotation of spin coater in which usually controlled by open-loop type. In long-term utilization of the spin coater, the performance of the motor usually degraded and caused the speed of the rotation is no longer accurate. Therefore to resolve the drawback, a close-loop system is applied in currently developed spin coater. The speed range of the spin coater was designed in between 450-6000 rpm, equipped with user interface through push button and LCD display. The rotary encoder transducer was applied to sense the speed of the dc motor. The pulse width modulation (PWM) method is applied to control the speed of the dc motor. The performance of the control system were evaluated based on the applied voltage to the PWM driver (L298) versus speed of the motor and also the rise time, overshoot, and settling time of the control system. The result shows that in the setting of low speed (450 rpm), the settling time is very fast about 12 seconds and very high overshoot about 225 rpm, contrary for the high speed (5550 rpm) the setting time is 71 seconds and very low overshot about 30 rpm. In addition, to evaluate the stability of the mechanical system, the spin coater was tested to prepare a ZnO thin film in various speed of rotations and at various concentrations of the solution, i.e. 10 wt.% and 15 wt.%. It is concluded that the spin coater can be utilized for thin film coating after pass the maximum of the settling time (71 seconds). The currently developed spin coater produce a film with common characteristics of the spin coater where thicker film was obtained when higher concentration was used and thinner the film was obtained when higher speed of the rotation

  9. Leveraging voice

    DEFF Research Database (Denmark)

    Frølunde, Lisbeth

    2017-01-01

    researchers improve our practices and how could digital online video help offer more positive stories about research and higher education? How can academics in higher education be better to tell about our research, thereby reclaiming and leveraging our voice in a post-factual era? As higher education......This paper speculates on how researchers share research without diluting our credibility and how to make strategies for the future. It also calls for consideration of new traditions and practices for communicating knowledge to a wider audience across multiple media platforms. How might we...... continues to engage with digital and networked technologies it becomes increasingly relevant to question why and how academics could (re) position research knowledge in the digital and online media landscape of today and the future. The paper highlights methodological issues that arise in relation...

  10. Feeling voices.

    Directory of Open Access Journals (Sweden)

    Paolo Ammirante

    Full Text Available Two experiments investigated deaf individuals' ability to discriminate between same-sex talkers based on vibrotactile stimulation alone. Nineteen participants made same/different judgments on pairs of utterances presented to the lower back through voice coils embedded in a conforming chair. Discrimination of stimuli matched for F0, duration, and perceived magnitude was successful for pairs of spoken sentences in Experiment 1 (median percent correct = 83% and pairs of vowel utterances in Experiment 2 (median percent correct = 75%. Greater difference in spectral tilt between "different" pairs strongly predicted their discriminability in both experiments. The current findings support the hypothesis that discrimination of complex vibrotactile stimuli involves the cortical integration of spectral information filtered through frequency-tuned skin receptors.

  11. Accelerated Degradation for Hardware in the Loop Simulation of Fuel Cell-Gas Turbine Hybrid System

    DEFF Research Database (Denmark)

    Abreu-Sepulveda, Maria A.; Harun, Nor Farida; Hackett, Gregory

    2015-01-01

    The U.S. Department of Energy (DOE)-National Energy Technology Laboratory (NETL) in Morgantown, WV has developed the hybrid performance (HyPer) project in which a solid oxide fuel cell (SOFC) one-dimensional (1D), real-time operating model is coupled to a gas turbine hardware system by utilizing...... hardware-in-the-loop simulation. To assess the long-term stability of the SOFC part of the system, electrochemical degradation due to operating conditions such as current density and fuel utilization have been incorporated into the SOFC model and successfully recreated in real time. The mathematical...... expression for degradation rate was obtained through the analysis of empirical voltage versus time plots for different current densities and fuel utilizations....

  12. Transient performance and intelligent combination control of a novel spray cooling loop system

    Institute of Scientific and Technical Information of China (English)

    Wang Jin; Li Yunze; Wang Jun

    2013-01-01

    Effective thermal control systems are essential for the reliable working of insulated gate bipolar transistors (IGBTs) in many applications. A novel spray cooling loop system with inte-grated sintered porous copper wick (SCLS-SPC) is proposed to meet the requirements of higher device level heat fluxes and the harsh environments in some applications such as hybrid, fuel cell vehicles and aerospace. Fuzzy logic and proportional-integral-derivative (PID) policies are applied to adjust the electronic temperature within a safe working range. To evaluate the thermal control effect, a mathematical model of a 4-node thermal network and pump are established for predicting the dynamics of the SCLS-SPC. Moreover, the transient response of the 4 nodes and vapor mass flowrate under no control, PID and Fuzzy-PID are numerically investigated and discussed in detail.

  13. Euclidean geodesic loops on high-genus surfaces applied to the morphometry of vestibular systems.

    Science.gov (United States)

    Xin, Shi-Qing; He, Ying; Fu, Chi-Wing; Wang, Defeng; Lin, Shi; Chu, Winnie C W; Cheng, Jack C Y; Gu, Xianfeng; Lui, Lok Ming

    2011-01-01

    This paper proposes a novel algorithm to extract feature landmarks on the vestibular system (VS), for the analysis of Adolescent Idiopathic Scoliosis (AIS) disease. AIS is a 3-D spinal deformity commonly occurred in adolescent girls with unclear etiology. One popular hypothesis was suggested to be the structural changes in the VS that induce the disturbed balance perception, and further cause the spinal deformity. The morphometry of VS to study the geometric differences between the healthy and AIS groups is of utmost importance. However, the VS is a genus-3 structure situated in the inner ear. The high-genus topology of the surface poses great challenge for shape analysis. In this work, we present a new method to compute exact geodesic loops on the VS. The resultant geodesic loops are in Euclidean metric, thus characterizing the intrinsic geometric properties of the VS based on the real background geometry. This leads to more accurate results than existing methods, such as the hyperbolic Ricci flow method. Furthermore, our method is fully automatic and highly efficient, e.g., one order of magnitude faster than. We applied our algorithm to the VS of normal and AIS subjects. The promising experimental results demonstrate the efficacy of our method and reveal more statistically significant shape difference in the VS between right-thoracic AIS and normal subjects.

  14. Bellows-Type Accumulators for Liquid Metal Loops of Space Reactor Power Systems

    Science.gov (United States)

    Tournier, Jean-Michel; El-Genk, Mohamed S.

    2006-01-01

    In many space nuclear power systems, the primary and/or secondary loops use liquid metal working fluids, and require accumulators to accommodate the change in the liquid metal volume and maintain sufficient subcooling to avoid boiling. This paper developed redundant and light-weight bellows-type accumulators with and without a mechanical spring, and compared the operating condition and mass of the accumulators for different types of liquid metal working fluids and operating temperatures: potassium, NaK-78, sodium and lithium loops of a total capacity of 50 liters and nominal operating temperatures of 840 K, 860 K, 950 K and 1340 K, respectively. The effects of using a mechanical spring and different structural materials on the design, operation and mass of the accumulators are also investigated. The structure materials considered include SS-316, Hastelloy-X, C-103 and Mo-14Re. The accumulator without a mechanical spring weighs 23 kg and 40 kg for a coolant subcooling of 50 K and 100 K, respectively, following a loss of the fill gas. The addition of a mechanical spring comes with a mass penalty, in favor of higher redundancy and maintaining a higher liquid metal subcooling.

  15. Combining the quantized color instruction set and loop unrolling on portable video processing systems

    Science.gov (United States)

    Kim, Jongmyon; Wills, D. Scott

    2004-04-01

    As wireless video products evolve, they demand more sophisticated processing at higher resolutions and frame rates. Computational performance and energy efficiency have become critical design issues. This paper presents the Quantized Color Pack eXtension (QCPX) combined with a loop unrolling (LU) technique to improve execution performance and energy efficiency of color image and video processing applications. QCPX applied to a 32-bit datapath processor supports parallel operations on two packed 16-bit YCbCr (Y: luminance, Cr and Cb: chrominance) color pixels, providing greater subword-level parallelism by increasing the number of smaller color pixels packed into a word. Instruction-level parallelism can be further enhanced through loop unrolling. These techniques provide greater performance and efficiency for multimedia workloads on mobile systems. Experimental results on a set of media benchmark applications indicate that the LU plus QCPX-optimized version achieves a speedup ranging from 3.8 to 7.9 while reducing the energy consumption from 76% to 87% over the baseline version on identically configured, dynamically scheduled ILP superscalar processors. The LU plus QCPX-optimized version also outperforms the LU plus MDMX-like (MIPS"s multimedia extension) version.

  16. Spatiotemporal dynamics of a digital phase-locked loop based coupled map lattice system

    Science.gov (United States)

    Banerjee, Tanmoy; Paul, Bishwajit; Sarkar, B. C.

    2014-03-01

    We explore the spatiotemporal dynamics of a coupled map lattice (CML) system, which is realized with a one dimensional array of locally coupled digital phase-locked loops (DPLLs). DPLL is a nonlinear feedback-controlled system widely used as an important building block of electronic communication systems. We derive the phase-error equation of the spatially extended system of coupled DPLLs, which resembles a form of the equation of a CML system. We carry out stability analysis for the synchronized homogeneous solutions using the circulant matrix formalism. It is shown through extensive numerical simulations that with the variation of nonlinearity parameter and coupling strength the system shows transitions among several generic features of spatiotemporal dynamics, viz., synchronized fixed point solution, frozen random pattern, pattern selection, spatiotemporal intermittency, and fully developed spatiotemporal chaos. We quantify the spatiotemporal dynamics using quantitative measures like average quadratic deviation and spatial correlation function. We emphasize that instead of using an idealized model of CML, which is usually employed to observe the spatiotemporal behaviors, we consider a real world physical system and establish the existence of spatiotemporal chaos and other patterns in this system. We also discuss the importance of the present study in engineering application like removal of clock-skew in parallel processors.

  17. Evaluation of a novel artificial pancreas: closed loop glycemic control system with continuous blood glucose monitoring.

    Science.gov (United States)

    Tsukamoto, Yuuki; Kinoshita, Yoshihiko; Kitagawa, Hiroyuki; Munekage, Masaya; Munekage, Eri; Takezaki, Yuka; Yatabe, Tomoaki; Yamashita, Koichi; Yamazaki, Rie; Okabayashi, Takehiro; Tarumi, Masatoshi; Kobayashi, Masaki; Mishina, Suguru; Hanazaki, Kazuhiro

    2013-04-01

    A closed-loop glycemic control system using an artificial pancreas has been applied with many clinical benefits in Japan since 1987. To update this system incorporating user-friendly features, we developed a novel artificial pancreas (STG-55). The purpose of this study was to evaluate STG-55 for device usability, performance of blood glucose measurement, glycemic control characteristics in vivo in animal experiments, and evaluate its clinical feasibility. There are several features for usability improvement based on the design concepts, such as compactness, display monitor, batteries, guidance function, and reduction of the preparation time. All animal study data were compared with a clinically available artificial pancreas system in Japan (control device: STG-22). We examined correlations of both blood glucose levels between two groups (STG-55 vs. control) using Clarke's error grid analysis, and also compared mean glucose infusion rate (GIR) during glucose clamp. The results showed strong correlation in blood glucose concentrations (Pearson's product-moment correlation coefficient: 0.97; n = 1636). Clarke's error grid analysis showed that 98.4% of the data fell in Zones A and B, which represent clinically accurate or benign errors, respectively. The difference in mean GIRs was less than 0.2 mg/kg/min, which was considered not significant. Clinical feasibility study demonstrated sufficient glycemic control maintaining target glucose range between 80 and 110 (mg/dL), and between 140 and 160 without any hypoglycemia. In conclusion, STG-55 was a clinically acceptable artificial pancreas with improved interface and usability. A closed-loop glycemic control system with STG-55 would be a useful tool for surgical and critical patients in intensive care units, as well as diabetic patients.

  18. A Closed-Loop Smart Control System Driving RGB Light Emitting Diodes

    KAUST Repository

    Al-Saggaf, Abeer

    2015-05-01

    The demand for control systems that are highly capable of driving solid-state optoelectronic devices has significantly increased with the advancement of their efficiency and elevation of their current consumption. This work presents a closed-loop control system that is based on a microcontroller embedded system capable of driving high power optoelectronic devices. In this version of the system, the device in the center of control is a high-power red, green, and blue light emitting diode package. The system features a graphical user interface, namely an Android mobile phone application, in which the user can easily use to vary the light color and intensity of the light-emitting device wirelessly via Bluetooth. Included in the system is a feedback mechanism constituted by a red, green, and blue color sensor through which the user can use to observe feedback color information about the emitted light. The system has many commercial application including in-door lighting and research application including plant agriculture research fields.

  19. Day and Night Closed-Loop Control Using the Integrated Medtronic Hybrid Closed-Loop System in Type 1 Diabetes at Diabetes Camp.

    Science.gov (United States)

    Ly, Trang T; Roy, Anirban; Grosman, Benyamin; Shin, John; Campbell, Alex; Monirabbasi, Salman; Liang, Bradley; von Eyben, Rie; Shanmugham, Satya; Clinton, Paula; Buckingham, Bruce A

    2015-07-01

    To evaluate the feasibility and efficacy of a fully integrated hybrid closed-loop (HCL) system (Medtronic MiniMed Inc., Northridge, CA), in day and night closed-loop control in subjects with type 1 diabetes, both in an inpatient setting and during 6 days at diabetes camp. The Medtronic MiniMed HCL system consists of a fourth generation (4S) glucose sensor, a sensor transmitter, and an insulin pump using a modified proportional-integral-derivative (PID) insulin feedback algorithm with safety constraints. Eight subjects were studied over 48 h in an inpatient setting. This was followed by a study of 21 subjects for 6 days at diabetes camp, randomized to either the closed-loop control group using the HCL system or to the group using the Medtronic MiniMed 530G with threshold suspend (control group). The overall mean sensor glucose percent time in range 70-180 mg/dL was similar between the groups (73.1% vs. 69.9%, control vs. HCL, respectively) (P = 0.580). Meter glucose values between 70 and 180 mg/dL were also similar between the groups (73.6% vs. 63.2%, control vs. HCL, respectively) (P = 0.086). The mean absolute relative difference of the 4S sensor was 10.8 ± 10.2%, when compared with plasma glucose values in the inpatient setting, and 12.6 ± 11.0% compared with capillary Bayer CONTOUR NEXT LINK glucose meter values during 6 days at camp. In the first clinical study of this fully integrated system using an investigational PID algorithm, the system did not demonstrate improved glucose control compared with sensor-augmented pump therapy alone. The system demonstrated good connectivity and improved sensor performance. © 2015 by the American Diabetes Association. Readers may use this article as long as the work is properly cited, the use is educational and not for profit, and the work is not altered.

  20. Characterization of Site for Installing Open Loop Ground Source Heat Pump System

    Science.gov (United States)

    Yun, S. W.; Park, Y.; Lee, J. Y.; Yi, M. J.; Cha, J. H.

    2014-12-01

    This study was conducted to understand hydrogeological properties of site where open loop ground source heat pump system will be installed and operated. Groundwater level and water temperature were hourly measured at the well developed for usage of open loop ground source heat pump system from 11 October 2013 to 8 January 2014. Groundwater was sampled in January and August 2013 and its chemical and isotopic compositions were analyzed. The bedrock of study area is the Jurassic granodiorite that mainly consists of quartz (27.9 to 46.8%), plagioclase (26.0 to 45.5%), and alkali feldspar (9.5 to 18.7%). The groundwater level ranged from 68.30 to 68.94 m (above mean sea level). Recharge rate was estimated using modified watertable fluctuation method and the recharge ratios was 9.1%. The water temperature ranged from 14.8 to 15.0oC. The vertical Increase rates of water temperature were 1.91 to 1.94/100 m. The water temperature showed the significant seasonal variation above 50 m depth, but had constant value below 50 m depth. Therefore, heat energy of the groundwater can be used securely in open loop ground source heat pump system. Electrical conductivity ranged from 120 to 320 µS/cm in dry season and from 133 to 310 µS/cm in wet season. The electrical conductivity gradually decreased with depth. In particular, electrical conductivity in approximately 30 m depth decreased dramatically (287 to 249 µS/cm) in wet season. The groundwater was Ca-HCO3 type. The concentrations of dissolved components did not show the vertically significant variations from 0 to 250 m depth. The δ18O and δD ranged from -9.5 to -9.4‰ and from -69 to -68‰. This work is supported by the New and Renewable Energy of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy (No.20123040110010).

  1. A Self-regulatory System of Interlinked Signaling Feedback Loops Controls Mouse Limb Patterning

    Science.gov (United States)

    Benazet, Jean-Denis; Bischofberger, Mirko; Tiecke, Eva; Gonalves, Alexandre; Martin, James F.; Zuniga, Aime; Naef, Felix; Zeller, Rolf

    Developmental pathways need to be robust against environmental and genetic variation to enable reliable morphogenesis. Here, we take a systems biology approach to explain how robustness is achieved in the developing mouse limb, a classical model of organogenesis. By combining quantitative genetics with computational modeling we established a computational model of multiple interlocked feedback modules, involving sonic hedgehog (SHH) morphogen, fibroblast growth factor (FGFs) signaling, bone morphogenetic protein (BMP) and its antagonist GREM1. Earlier modeling work had emphasized the versatile kinetic characteristics of interlocked feedback loops operating at different time scales. Here we develop and then validate a similar computational model to show how BMP4 first initiates and SHH then propagates feedback in the network through differential transcriptional regulation of Grem1 to control digit specification. This switch occurs by linking a fast BMP4/GREM1 module to a slower SHH/GREM1/FGF feedback loop. Simulated gene expression profiles modeled normal limb development as well those of single-gene knockouts. Sensitivity analysis showed how the model was robust and insensitive to variability in parameters. A surprising prediction of the model was that an early Bmp4 signal is essential to kick-start Grem1 expression and the digit specification system. We experimentally validated the prediction using inducible alleles and showed that early, but not late, removal of Bmp4 dramatically disrupted limb development. Sensitivity analysis showed how robustness emerges from this circuitry. This study shows how modeling and computation can help us understand how self-regulatory signaling networks achieve robust regulation of limb development, by exploiting interconnectivity among the three signaling pathways. We expect that similar computational analyses will shed light on the origins of robustness in other developmental systems, and I will discuss some recent examples from

  2. An Improved Design for Air Removal from Aerospace Fluid Loop Coolant Systems

    Science.gov (United States)

    Ritchie, Stephen M. C.; Holladay, Jon B.; Holt, J. Mike; Clark, Dallas W.

    2003-01-01

    Aerospace applications with requirements for large capacity heat removal (launch vehicles, platforms, payloads, etc.) typically utilize a liquid coolant fluid as a transport media to increase efficiency and flexibility in the vehicle design. An issue with these systems however, is susceptibility to the presence of noncondensable gas (NCG) or air. The presence of air in a coolant loop can have numerous negative consequences, including loss of centrifugal pump prime, interference with sensor readings, inhibition of heat transfer, and coolant blockage to remote systems. Hardware ground processing to remove this air is also cumbersome and time consuming which continuously drives recurring costs. Current systems for maintaining the system free of air are tailored and have demonstrated only moderate success. An obvious solution to these problems is the development and advancement of a passive gas removal device, or gas trap, that would be installed in the flight cooling system simplifying the initial coolant fill procedure and also maintaining the system during operations. The proposed device would utilize commercially available membranes thus increasing reliability and reducing cost while also addressing both current and anticipated applications. In addition, it maintains current pressure drop, water loss, and size restrictions while increasing tolerance for pressure increases due to gas build-up in the trap.

  3. Real-Time Hardware-in-the-Loop Laboratory Testing for Multisensor Sense and Avoid Systems

    Directory of Open Access Journals (Sweden)

    Giancarmine Fasano

    2013-01-01

    Full Text Available This paper focuses on a hardware-in-the-loop facility aimed at real-time testing of architectures and algorithms of multisensor sense and avoid systems. It was developed within a research project aimed at flight demonstration of autonomous non-cooperative collision avoidance for Unmanned Aircraft Systems. In this framework, an optionally piloted Very Light Aircraft was used as experimental platform. The flight system is based on multiple-sensor data integration and it includes a Ka-band radar, four electro-optical sensors, and two dedicated processing units. The laboratory test system was developed with the primary aim of prototype validation before multi-sensor tracking and collision avoidance flight tests. System concept, hardware/software components, and operating modes are described in the paper. The facility has been built with a modular approach including both flight hardware and simulated systems and can work on the basis of experimentally tested or synthetically generated scenarios. Indeed, hybrid operating modes are also foreseen which enable performance assessment also in the case of alternative sensing architectures and flight scenarios that are hardly reproducible during flight tests. Real-time multisensor tracking results based on flight data are reported, which demonstrate reliability of the laboratory simulation while also showing the effectiveness of radar/electro-optical fusion in a non-cooperative collision avoidance architecture.

  4. A study about detection of defects in the nuclear piping loop system using cooling lock-in infrared thermography

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Chae; Kang, Sung Hoon; Yun, Na Yeon; Jung, Hyun Chul; Kim, Kyeong Suk [Dept. of Mechanical System Engineering, Chosun University, Gwangju (Korea, Republic of)

    2015-10-15

    A study on the application of cooling defect detection was performed on the basis of a preceding study on the heated defect detection in nuclear piping loop system, using lock-in infrared thermography. A loop system with piping defects was made by varying the wall-thinning length, the circumference orientation angle, and the wall-thinning depth. The test was performed using an IR camera and a cooling device. Distance between the cooling device and the target loop system was fixed at 2 m. For analyzing experimental results, the temperature distribution data for cooling, and phase data were obtained. Through the analysis of this data, the defect length was measured. The reliability of the measurements for cooling defect conditions was shown to be higher in the lock-in infrared thermography data than the infrared thermography data.

  5. Multi-Purpose Thermal Hydraulic Loop: Advanced Reactor Technology Integral System Test (ARTIST) Facility for Support of Advanced Reactor Technologies

    Energy Technology Data Exchange (ETDEWEB)

    James E. O' Brien; Piyush Sabharwall; SuJong Yoon

    2001-11-01

    Effective and robust high temperature heat transfer systems are fundamental to the successful deployment of advanced reactors for both power generation and non-electric applications. Plant designs often include an intermediate heat transfer loop (IHTL) with heat exchangers at either end to deliver thermal energy to the application while providing isolation of the primary reactor system. In order to address technical feasibility concerns and challenges a new high-temperature multi-fluid, multi-loop test facility “Advanced Reactor Technology Integral System Test facility” (ARTIST) is under development at the Idaho National Laboratory. The facility will include three flow loops: high-temperature helium, molten salt, and steam/water. Details of some of the design aspects and challenges of this facility, which is currently in the conceptual design phase, are discussed

  6. Investigation of creep by use of closed loop servo-hydraulic test system

    Science.gov (United States)

    Wu, H. C.; Yao, J. C.

    1981-01-01

    Creep tests were conducted by means of a closed loop servo-controlled materials test system. These tests are different from the conventional creep tests in that the strain history prior to creep may be carefully monitored. Tests were performed for aluminum alloy 6061-0 at 150 C and monitored by a PDP 11/04 minicomputer at a preset constant plastic-strain rate prehistory. The results show that the plastic-strain rate prior to creep plays a significant role in creep behavior. The endochronic theory of viscoplasticity was applied to describe the observed creep curves. The concepts of intrinsic time and strain rate sensitivity function are employed and modified according to the present observation.

  7. A low reference spur quadrature phase-locked loop for UWB systems

    Institute of Scientific and Technical Information of China (English)

    Fu Haipeng; Cai Deyun; Ren Junyan; Li Wei; Li Ning

    2011-01-01

    This paper presents a low phase noise and low reference spur quadrature phase-locked loop (QPLL) circuit that is implemented as a part of a frequency synthesizer for China UWB standard systems.A glitch-suppressed charge pump (CP) is employed for reference spur reduction.By forcing the phase frequency detector and CP to operate in a linear region of its transfer function,the linearity of the QPLL is further improved.With the proposed series-quadrature voltage-controlled oscillator,the phase accuracy of the QPLL is guaranteed.The circuit is fabricated in the TSMC 0.13 μtm CMOS process and operated at 1.2-V supply voltage.The QPLL measures a phase noise of-95 dBc/Hz at 100-kHz offset and a reference spur of-71 dBc.The fully-integrated QPLL dissipates a current of 13 mA.

  8. Design of PID controllers in double feedback loops for SISO systems with set-point filters.

    Science.gov (United States)

    Vijayan, V; Panda, Rames C

    2012-07-01

    A PID controller is widely used to control industrial processes that are mostly open loop stable or unstable. Selection of proper feedback structure and controller tuning helps to improve the performance of the loop. In this paper a double-feedback loop/method is used to achieve stability and better performance of the process. The internal feedback is used for stabilizing the process and the outer loop is used for good setpoint tracking. An internal model controller (IMC) based PID method is used for tuning the outer loop controller. Autotuning based on relay feedback or the Ziegler-Nichols method can be used for tuning an inner loop controller. A tuning parameter (λ) that is used to tune IMC-PID is used as a time constant of a setpoint filter that is used for reducing the peak overshoot. The method has been tested successfully on many low order processes.

  9. Hardware-in-Loop-Simulator for InnoSAT Attitude Control System

    Directory of Open Access Journals (Sweden)

    S. M. Sharun

    2016-10-01

    Full Text Available After launching, the initial condition of satellite is unknown and tends to be in a tumbling state. At this moment, the satellite needs to reduce the tumbling rate so that the satellite can enter a stable and unruffled state. The satellite also must maintain a certain attitude while orbiting in order to allow precise pointing of the antenna toward the earth. In[D1]  this study, a hardware-in-loop-simulator was devised for the purpose of improving the design and verifying attitude control concepts for Innovative Satellite (InnoSAT system. A new software architecture and algorithm was developed based on the controller, InnoSAT plant, actuator and sensor. Firstly, the controller, actuator and sensor was modelled in the MATLAB program together with InnoSAT plant. The actuator and sensor were assumed to be ideal. However, some properties of the actuator and sensor were simulated in the software simulator. If the software simulation performed satisfactorily, the control algorithm will be embedded into Rabbit Micro Controller (RCM4100 using Dynamic C language. This is the part where the hardware simulation is developed which is creating hardware-in-loop-simulation technique for verification of InnoSAT Attitude Control System (ACS performance. [D2] The satellite simulator was tested using simulated data in order to observe the performances of the controller in real time simulation. The results show that the InnoSAT ACS simulator can produce as good result as a MATLAB simulation for the InnoSAT plants. From the results, it is adequate to verify that the developed protocol working satisfyingly and seems to be possible to be implemented on the actual flight.[D3]  [D1]1 sentence on problem statement would be better.. [D2]Need to rewrite…. [D3]Need to rewrite…..

  10. Loop heat pipes - highly efficient heat-transfer devices for systems of sun heat supply

    Energy Technology Data Exchange (ETDEWEB)

    Maydanik, Yu. [Ural Branch of the Russian Academy of Sciences, Ekaterinburg (Russian Federation). Inst. of Thermophysics

    2004-07-01

    Loop heat pipes (LHPs) are hermetic heat-transfer devices operating on a closed evaporation-condensation cycle with the use of capillary pressure for pumping the working fluid [1]. In accordance with this, they possess all the main advantages of conventional heat pipes, but, as distinct from the latter, have a considerably higher heat-transfer capacity, especially when operating in the ''antigravity'' regime, when heat is transferred from above downwards. Besides, LHPs possess a higher functional versatility, are adaptable to different operating conditions and provide great scope for various design embodiments. This is achieved at the expense of both the original design of the device and the properties of the wick - a special capillary structure used for the creation of capillary pressure. The LHP schematic diagram is given in Fig. 1. The device contains an evaporator and a condenser - heat exchanger connected by means of smooth-walled pipe-lines with a relatively small diameter intended for separate motion of vapor and liquid. At present loop heat pipes are most extensively employed in thermoregulation systems of spacecrafts. Miniature LHPs are used for cooling electronics and computers. At the same time there exists a considerable potential of using these devices for the recovery of low-grade (waste) heat from different sources, and also in systems of sun heat supply. In the latter case LHPs may serve as an efficient heat-transfer link between a sun collector and a heat accumulator, which has a low thermal resistance and does not consume any additional energy for pumping the working fluid between them. (orig.)

  11. The integration of water loop heat pump and building structural thermal storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Marseille, T.J.; Schliesing, J.S.

    1991-10-01

    Many commercial buildings need heat in one part and, at the same time, cooling in another part. Even more common is the need for heating during one part of the day and cooling during another in the same spaces. If that energy could be shifted or stored for later use, significant energy might be saved. If a building's heating and cooling subsystems could be integrated with the building's structural mass and used to collect, store, and deliver energy, the energy might be save cost-effectively. To explore this opportunity, researchers at the Pacific Northwest Laboratory (PNL) examined the thermal interactions between the heating, ventilating, and air-conditioning (HVAC) system and the structure of a commercial building. Computer models were developed to simulate the interactions in an existing building located in Seattle, Washington, to determine how these building subsystems could be integrated to improve energy efficiency. The HVAC subsystems in the existing building were modeled. These subsystems consist of decentralized water-source heat pumps (WSHP) in a closed water loop, connected to cooling towers for heat rejection during cooling mode and boilers to augment heating. An initial base case'' computer model of the Seattle building, as-built, was developed. Metered data available for the building were used to calibrate this model to ensure that the analysis would provide information that closely reflected the operation of a real building. The HVAC system and building structure were integrated in the model using the concrete floor slabs as thermal storage media. The slabs may be actively charged during off-peak periods with the chilled water in the loop and then either actively or passively discharged into the conditioned space during peak periods. 21 refs., 37 figs., 17 tabs.

  12. Gradiometer Using Middle Loops as Sensing Elements in a Low-Field SQUID MRI System

    Science.gov (United States)

    Penanen, Konstantin; Hahn, Inseob; Ho Eom, Byeong

    2009-01-01

    A new gradiometer scheme uses middle loops as sensing elements in lowfield superconducting quantum interference device (SQUID) magnetic resonance imaging (MRI). This design of a second order gradiometer increases its sensitivity and makes it more uniform, compared to the conventional side loop sensing scheme with a comparable matching SQUID. The space between the two middle loops becomes the imaging volume with the enclosing cryostat built accordingly.

  13. A Variable-Output Bio-Electrochemical System for Wastewater Treatment and Increased Loop Closure in Exploration Life Support Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this project IntAct Labs proposes to develop a novel system to increase loop closure for water treatment in regenerative life support using bio-electrochemical...

  14. Quantum memory effects in noninteracting cold-atom systems: Hysteresis loop and lattice transformation

    Science.gov (United States)

    Chien, Chihchun; Metcalf, Mekena; Lai, Chenyen

    2016-05-01

    Memory effects are observable in magnetization, rechargeable batteries, and many systems exhibiting history-dependent states. Quantum memory effects are observable, for instance, in atomic superfluids. A counter-intuitive question is whether quantum memory effects can exist in noninteracting systems. Here we present two examples of cold-atom systems demonstrating memory effects in noninteracting systems. The first example is a ring-shaped potential loaded with noninteracting fermions. An artificial vector potential drives a current and with a tunable dissipative background, the current lags behind the driving and exhibits hysteresis loops. The dissipative energy can be controlled by the coupling between the fermions and the background. In the second example, cold atoms loaded in a tunable optical lattice transformed from the triangular to the kagome geometry. The kagome lattice supports a flat-band consisting of degenerate localized states. Quantum memory effects are observable after a lattice transformation as the steady-state density depends on the rate of the transformation. The versatility of memory effects in cold-atom systems promises novel applications in atomtronics.

  15. A liquid-metal filling system for pumped primary loop space reactors

    Science.gov (United States)

    Crandall, D. L.; Reed, W. C.

    Some concepts for the SP-100 space nuclear power reactor use liquid metal as the primary coolant in a pumped loop. Prior to filling ground engineering test articles or reactor systems, the liquid metal must be purified and circulated through the reactor primary system to remove contaminants. If not removed, these contaminants enhance corrosion and reduce reliability. A facility was designed and built to support Department of Energy Liquid Metal Fast Breeder Reactor tests conducted at the Idaho National Engineering Laboratory. This test program used liquid sodium to cool nuclear fuel in in-pile experiments; thus, a system was needed to store and purify sodium inventories and fill the experiment assemblies. This same system, with modifications and potential changeover to lithium or sodium-potassium (NaK), can be used in the Space Nuclear Power Reactor Program. This paper addresses the requirements, description, modifications, operation, and appropriateness of using this liquid-metal system to support the SP-100 space reactor program.

  16. Automatic Speech Recognition Systems for the Evaluation of Voice and Speech Disorders in Head and Neck Cancer

    Directory of Open Access Journals (Sweden)

    Andreas Maier

    2010-01-01

    Full Text Available In patients suffering from head and neck cancer, speech intelligibility is often restricted. For assessment and outcome measurements, automatic speech recognition systems have previously been shown to be appropriate for objective and quick evaluation of intelligibility. In this study we investigate the applicability of the method to speech disorders caused by head and neck cancer. Intelligibility was quantified by speech recognition on recordings of a standard text read by 41 German laryngectomized patients with cancer of the larynx or hypopharynx and 49 German patients who had suffered from oral cancer. The speech recognition provides the percentage of correctly recognized words of a sequence, that is, the word recognition rate. Automatic evaluation was compared to perceptual ratings by a panel of experts and to an age-matched control group. Both patient groups showed significantly lower word recognition rates than the control group. Automatic speech recognition yielded word recognition rates which complied with experts' evaluation of intelligibility on a significant level. Automatic speech recognition serves as a good means with low effort to objectify and quantify the most important aspect of pathologic speech—the intelligibility. The system was successfully applied to voice and speech disorders.

  17. Vertical stability of ITER plasmas with 3D passive structures and a double-loop control system

    Energy Technology Data Exchange (ETDEWEB)

    Portone, A. [EFDA-CSU, Max Planck Institute for Plasmaphysics, Boltzmannstrasse 2, D-85748 Garching (Germany)]. E-mail: alfredo.portone@tech.efda.org; Albanese, R. [Assoc. Euratom-ENEA-CREATE, University Mediterranea RC, Loc. Feo di Vito, I-89060, RC (Italy); Fresa, R. [DIFA, University della Bastilicata, Contrada Macchia Romana I-85100, Potenza (Italy); Mattei, M. [Assoc. Euratom-ENEA-CREATE, University Mediterranea RC, Loc. Feo di Vito, I-89060, RC (Italy); Rubinacci, G. [Assoc. Euratom-ENEA-CREATE, University Cassino, Via Di Biasio 43, I-03043, Cassino (FR) (Italy); Villone, F. [Assoc. Euratom-ENEA-CREATE, University Cassino, Via Di Biasio 43, I-03043, Cassino (FR) (Italy)

    2005-11-15

    In this study we derive linear models describing the dynamics of the n 0 plasma displacements around the main ITER equilibrium configurations. The models derived are consistent with the MHD equilibrium constraint as well as with the 3D geometry of the vacuum vessel and blanket outer triangular support where the main eddy currents flow takes place. Particular emphasis is placed on the analysis of the stability margin, growth time and minimum stabilization voltage. The performances of the present ITER control system (single loop) are compared to those of an upgraded system (double-loop) that is here proposed to improve the stability domain of the ITER plasmas forecast.

  18. Strategic optimization of large-scale vertical closed-loop shallow geothermal systems

    Science.gov (United States)

    Hecht-Méndez, J.; de Paly, M.; Beck, M.; Blum, P.; Bayer, P.

    2012-04-01

    Vertical closed-loop geothermal systems or ground source heat pump (GSHP) systems with multiple vertical borehole heat exchangers (BHEs) are attractive technologies that provide heating and cooling to large facilities such as hotels, schools, big office buildings or district heating systems. Currently, the worldwide number of installed systems shows a recurrent increase. By running arrays of multiple BHEs, the energy demand of a given facility is fulfilled by exchanging heat with the ground. Due to practical and technical reasons, square arrays of the BHEs are commonly used and the total energy extraction from the subsurface is accomplished by an equal operation of each BHE. Moreover, standard designing practices disregard the presence of groundwater flow. We present a simulation-optimization approach that is able to regulate the individual operation of multiple BHEs, depending on the given hydro-geothermal conditions. The developed approach optimizes the overall performance of the geothermal system while mitigating the environmental impact. As an example, a synthetic case with a geothermal system using 25 BHEs for supplying a seasonal heating energy demand is defined. The optimization approach is evaluated for finding optimal energy extractions for 15 scenarios with different specific constant groundwater flow velocities. Ground temperature development is simulated using the optimal energy extractions and contrasted against standard application. It is demonstrated that optimized systems always level the ground temperature distribution and generate smaller subsurface temperature changes than non-optimized ones. Mean underground temperature changes within the studied BHE field are between 13% and 24% smaller when the optimized system is used. By applying the optimized energy extraction patterns, the temperature of the heat carrier fluid in the BHE, which controls the overall performance of the system, can also be raised by more than 1 °C.

  19. Examining System-Wide Impacts of Solar PV Control Systems with a Power Hardware-in-the-Loop Platform

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Tess L.; Fuller, Jason C.; Schneider, Kevin P.; Palmintier, Bryan; Lundstrom, Blake; Chakraborty, Sudipta

    2014-10-11

    High penetration levels of distributed solar PV power generation can lead to adverse power quality impacts such as excessive voltage rise, voltage flicker, and reactive power values that result in unacceptable voltage levels. Advanced inverter control schemes have been proposed that have the potential to mitigate many power quality concerns. However, closed-loop control may lead to unintended behavior in deployed systems as complex interactions can occur between numerous operating devices. In order to enable the study of the performance of advanced control schemes in a detailed distribution system environment, a Hardware-in-the-Loop (HIL) platform has been developed. In the HIL system, GridLAB-D, a distribution system simulation tool, runs in real-time mode at the Pacific Northwest National Laboratory (PNNL) and supplies power system parameters at a point of common coupling to hardware located at the National Renewable Energy Laboratory (NREL). Hardware inverters interact with grid and PV simulators emulating an operational distribution system and power output from the inverters is measured and sent to PNNL to update the real-time distribution system simulation. The platform is described and initial test cases are presented. The platform is used to study the system-wide impacts and the interactions of controls applied to inverters that are integrated into a simulation of the IEEE 8500-node test feeder, with inverters in either constant power factor control or active volt/VAR control. We demonstrate that this HIL platform is well-suited to the study of advanced inverter controls and their impacts on the power quality of a distribution feeder. Additionally, the results from HIL are used to validate GridLAB-D simulations of advanced inverter controls.

  20. Examining System-Wide Impacts of Solar PV Control Systems with a Power Hardware-in-the-Loop Platform

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Tess L.; Fuller, Jason C.; Schneider, Kevin P.; Palmintier, Bryan; Lundstrom, Blake; Chakraborty, Sudipta

    2014-06-08

    High penetration levels of distributed solar PV power generation can lead to adverse power quality impacts, such as excessive voltage rise, voltage flicker, and reactive power values that result in unacceptable voltage levels. Advanced inverter control schemes have been developed that have the potential to mitigate many power quality concerns. However, local closed-loop control may lead to unintended behavior in deployed systems as complex interactions can occur between numerous operating devices. To enable the study of the performance of advanced control schemes in a detailed distribution system environment, a test platform has been developed that integrates Power Hardware-in-the-Loop (PHIL) with concurrent time-series electric distribution system simulation. In the test platform, GridLAB-D, a distribution system simulation tool, runs a detailed simulation of a distribution feeder in real-time mode at the Pacific Northwest National Laboratory (PNNL) and supplies power system parameters at a point of common coupling. At the National Renewable Energy Laboratory (NREL), a hardware inverter interacts with grid and PV simulators emulating an operational distribution system. Power output from the inverters is measured and sent to PNNL to update the real-time distribution system simulation. The platform is described and initial test cases are presented. The platform is used to study the system-wide impacts and the interactions of inverter control modes—constant power factor and active Volt/VAr control—when integrated into a simulated IEEE 8500-node test feeder. We demonstrate that this platform is well-suited to the study of advanced inverter controls and their impacts on the power quality of a distribution feeder. Additionally, results are used to validate GridLAB-D simulations of advanced inverter controls.

  1. Evaluation of an optical beam-position-monitor system with closed-loop steering capabilities

    Science.gov (United States)

    Bissen, Mark; Rogers, Greg; Wood, William; Eisert, Dave; Kleman, K. J.; Winter, William; Höchst, Hartmut

    1994-08-01

    Imaging the synchrotron source profile onto the entrance slit of a monochromator provides a stable and reproducible energy calibration which is independent of the absolute position and drift of the electron beam. Potential electron-beam motions occurring during a fill result in a loss of flux through the beamline. We have implemented two independent beam position monitors which can be used as sensors to steer the vertical entrance mirror in order to maintain a maximum flux through a spherical grating varied line-spacing monochromator beamline. The system consists of a slotted plate photodiode which intercepts 2 mrad of synchrotron radiation next to the entrance mirror and a detector utilizing the photocurrents generated at the jaws of the entrance-slit assembly. Both monitors have a wide linear response range with a vertical position resolution of beam position monitors allows an easy check on the mechanical and thermal stability of the entrance optical system as well as on the reproducibility and long-term fluctuations of the electron-beam source during user shifts. We will discuss the performance of the optical beam-position-monitor system and its implementation as a sensor in a closed-loop feedback system to maintain maximum flux through the beamline.

  2. Dimensionality in voice quality.

    Science.gov (United States)

    Bele, Irene Velsvik

    2007-05-01

    This study concerns speaking voice quality in a group of male teachers (n = 35) and male actors (n = 36), as the purpose was to investigate normal and supranormal voices. The goal was the development of a method of valid perceptual evaluation for normal to supranormal and resonant voices. The voices (text reading at two loudness levels) had been evaluated by 10 listeners, for 15 vocal characteristics using VA scales. In this investigation, the results of an exploratory factor analysis of the vocal characteristics used in this method are presented, reflecting four dimensions of major importance for normal and supranormal voices. Special emphasis is placed on the effects on voice quality of a change in the loudness variable, as two loudness levels are studied. Furthermore, the vocal characteristics Sonority and Ringing voice quality are paid special attention, as the essence of the term "resonant voice" was a basic issue throughout a doctoral dissertation where this study was included.

  3. Voice box (image)

    Science.gov (United States)

    The larynx, or voice box, is located in the neck and performs several important functions in the body. The larynx is involved in swallowing, breathing, and voice production. Sound is produced when the air which ...

  4. Voice and Aging

    Science.gov (United States)

    ... dramatic voice changes are those during childhood and adolescence. The larynx (or voice box) and vocal cord tissues do not fully mature until late teenage years. Hormone-related changes during adolescence are ...

  5. Shifting voices with participant roles: Voice qualities and speech registers in Mesoamerica

    OpenAIRE

    Sicoli, M.

    2010-01-01

    Although an increasing number of sociolinguistic researchers consider functions of voice qualities as stylistic features, few studies consider cases where voice qualities serve as the primary signs of speech registers. This article addresses this gap through the presentation of a case study of Lachixio Zapotec speech registers indexed though falsetto, breathy, creaky, modal, and whispered voice qualities. I describe the system of contrastive speech registers in Lachixio Zapotec and then track...

  6. A Unique Wavelet Steganography Based Voice Biometric Protection Scheme

    Directory of Open Access Journals (Sweden)

    Sanjaypande M. B

    2013-03-01

    Full Text Available Voice biometric is an easy and cost effective biometric technique which requires minimalistic hardware and software complexity. General voice biometric needs a voice phrase by user which is processed with Mel Filter and Vector Quantized features are extracted. Vector quantization reduces the codebook size but decreases the accuracy of recognition. Therefore we propose a voice biometric system where voice file's non quantized code books are matched with spoken phrase. In order to ensure security to such direct voice sample we embed the voice file in a randomly selected image using DWT technique. Imposters are exposed to only images and are unaware of the voice files. We show that the technique produces better efficiency in comparison to VQ based technique.

  7. Design and Modification of Electric Heating Control System of Na-K Alloy Fabrication Loop

    Institute of Scientific and Technical Information of China (English)

    XIE; Zheng; ZHU; Hao; ZHANG; Ting

    2015-01-01

    The Na-K alloy fabrication loop has been built since 2003.The loop mainly includes sodium storage tank,potassium storage tank,sodium transportation tank,potassium transportation tank,Na-K alloy fabrication tank,filters,corresponding valves and pipes.It is mainly used for

  8. WiFi Voice Communication System Based on QT%基于QT的WiFi语音通信系统

    Institute of Scientific and Technical Information of China (English)

    赵付轩; 杨斌

    2012-01-01

    Aiming at speech signal acquisition in embedded system, the design uses UDP protocol for data transmission, uses Socket programming to ensure the reliability of data transmission and realizes LAN speech communication from end to end. This paper describes how to design and develop LAN real-time voice communication software based on QT and Linux development platform by using existing audio programming and network programming knowledge.%针对嵌入式系统语音信号的采集,采用UDP协议进行数据传输,运用Socket编程保证数据传输的可靠性,实现局域网里端到端的语音通信.主要阐述了如何在Linux开发平台上,利用现有的音频编程和网络编程知识,设计和开发局域网里基于QT的实时语音通信软件.

  9. How to Generate Chaos from Switching System: A Saddle Focus of Index 1 and Heteroclinic Loop-Based Approach

    Directory of Open Access Journals (Sweden)

    Fang Bao

    2011-01-01

    Full Text Available There exist two different types of equilibrium points in 3-D autonomous systems, named as saddle foci of index 1 and index 2, which are crucial for chaos generation. Although saddle foci of index 2 have been usually applied for creating double-scroll or double-wing chaotic attractors, saddle foci of index 1 are further considered for chaos generation in this paper. A novel approach for constructing chaotic systems is investigated by applying the switching control strategy and yielding a heteroclinic loop which connects two saddle foci of index 1. A basic 3-D linear system with an arbitrary normal direction of the eigenplane, possessing a saddle focus of index 1 whose corresponding eigenvalues satisfy the Shil'nikov inequality, is first introduced. Then a heteroclinic loop connecting two saddle foci of index 1 will be formed by applying the switching control strategy to the basic 3-D linear system. The heteroclinic loop consists of an unstable manifold, a stable manifold, and a heteroclinic point. Under the necessary conditions for forming the heteroclinic loop, the intended two-segmented piecewise linear system which exhibits the chaotic behavior in the sense of the Smale horseshoe can be finally constructed. An illustrative example is given, confirming the effectiveness of the proposed method.

  10. Voice and endocrinology

    OpenAIRE

    KVS Hari Kumar; Anurag Garg; Ajai Chandra, N. S.; Singh, S. P.; Rakesh Datta

    2016-01-01

    Voice is one of the advanced features of natural evolution that differentiates human beings from other primates. The human voice is capable of conveying the thoughts into spoken words along with a subtle emotion to the tone. This extraordinary character of the voice in expressing multiple emotions is the gift of God to the human beings and helps in effective interpersonal communication. Voice generation involves close interaction between cerebral signals and the peripheral apparatus consistin...

  11. Customer interface document for the Molten Salt Test Loop (MSTL) system.

    Energy Technology Data Exchange (ETDEWEB)

    Pettit, Kathleen; Kolb, William J.; Gill, David Dennis; Briggs, Ronald D.

    2012-03-01

    The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate 'solar salt' and can circulate the salt at pressure up to 600psi, temperature to 585 C, and flow rate of 400-600GPM depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

  12. The Response Clamp: Functional characterization of neural systems using closed-loop control

    Directory of Open Access Journals (Sweden)

    Avner eWallach

    2013-01-01

    Full Text Available The voltage clamp method, pioneered by Hodgkin, Huxley and Katz, laid the foundations to neurophysiological research. Its core rationale is the use of closed-loop control as a tool for system characterization. A recently introduced method, the response clamp, extends the voltage clamp rationale to the functional, phenomenological level. The method consists of on-line estimation of a response variable of interest (e.g. the probability of response or its latency and a simple feedback control mechanism designed to tightly converge this variable towards a desired trajectory. In the present contribution I offer a perspective on this novel method and its applications in the broader context of system identification and characterization. First, I demonstrate how internal state variables are exposed using the method, and how the use of several controllers may allow for a detailed, multi-variable characterization of the system. Second, I discuss three different categories of applications of the method: (i exploration of intrinsically generated dynamics, (ii exploration of extrinsically generated dynamics and (iii generation of input-output trajectories. The relation of these categories to similar uses in the voltage clamp and other techniques is also discussed. Finally, I discuss the method’s limitations, as well as its possible synthesis with existing complementary approaches.

  13. Writing with Voice

    Science.gov (United States)

    Kesler, Ted

    2012-01-01

    In this Teaching Tips article, the author argues for a dialogic conception of voice, based in the work of Mikhail Bakhtin. He demonstrates a dialogic view of voice in action, using two writing examples about the same topic from his daughter, a fifth-grade student. He then provides five practical tips for teaching a dialogic conception of voice in…

  14. Tips for Healthy Voices

    Science.gov (United States)

    ... social interaction as well as for most people’s occupation. Proper care and use of your voice will give you the best chance for having a healthy voice for your entire lifetime. Hoarseness or roughness in your voice is often ...

  15. Voice over IP Security

    CERN Document Server

    Keromytis, Angelos D

    2011-01-01

    Voice over IP (VoIP) and Internet Multimedia Subsystem technologies (IMS) are rapidly being adopted by consumers, enterprises, governments and militaries. These technologies offer higher flexibility and more features than traditional telephony (PSTN) infrastructures, as well as the potential for lower cost through equipment consolidation and, for the consumer market, new business models. However, VoIP systems also represent a higher complexity in terms of architecture, protocols and implementation, with a corresponding increase in the potential for misuse. In this book, the authors examine the

  16. Adaptive Correlation Space Adjusted Open-Loop Tracking Approach for Vehicle Positioning with Global Navigation Satellite System in Urban Areas.

    Science.gov (United States)

    Ruan, Hang; Li, Jian; Zhang, Lei; Long, Teng

    2015-08-28

    For vehicle positioning with Global Navigation Satellite System (GNSS) in urban areas, open-loop tracking shows better performance because of its high sensitivity and superior robustness against multipath. However, no previous study has focused on the effects of the code search grid size on the code phase measurement accuracy of open-loop tracking. Traditional open-loop tracking methods are performed by the batch correlators with fixed correlation space. The code search grid size, which is the correlation space, is a constant empirical value and the code phase measuring accuracy will be largely degraded due to the improper grid size, especially when the signal carrier-to-noise density ratio (C/N₀) varies. In this study, the Adaptive Correlation Space Adjusted Open-Loop Tracking Approach (ACSA-OLTA) is proposed to improve the code phase measurement dependent pseudo range accuracy. In ACSA-OLTA, the correlation space is adjusted according to the signal C/N₀. The novel Equivalent Weighted Pseudo Range Error (EWPRE) is raised to obtain the optimal code search grid sizes for different C/N₀. The code phase measuring errors of different measurement calculation methods are analyzed for the first time. The measurement calculation strategy of ACSA-OLTA is derived from the analysis to further improve the accuracy but reduce the correlator consumption. Performance simulation and real tests confirm that the pseudo range and positioning accuracy of ASCA-OLTA are better than the traditional open-loop tracking methods in the usual scenarios of urban area.

  17. Geoscience Laser Altimeter System (GLAS) Instrument: Flight Loop Heat Pipe (LHP) Acceptance Thermal Vacuum Test

    Science.gov (United States)

    Baker, Charles; Butler, Dan; Ku, Jentung; Grob, Eric; Swanson, Ted; Nikitkin, Michael; Powers, Edward I. (Technical Monitor)

    2001-01-01

    Two loop heat pipes (LHPs) are to be used for tight thermal control of the Geoscience Laser Altimeter System (GLAS) instrument, planned for flight in late 2001. The LHPs are charged with Propylene as a working fluid. One LHP will be used to transport 110 W from a laser to a radiator, the other will transport 160 W from electronic boxes to a separate radiator. The application includes a large amount of thermal mass in each LHP system and low initial startup powers. The initial design had some non-ideal flight design compromises, resulted in a less than ideal charge level for this design concept with a symmetrical secondary wick. This less than ideal charge was identified as the source of inadequate performance of the flight LHPs during the flight thermal vacuum test in October of 2000. We modified the compensation chamber design, re-built and charged the LHPs for a final LHP acceptance thermal vacuum test. This test performed March of 2001 was 100% successful. This is the last testing to be performed on the LHPs prior to instrument thermal vacuum test. This sensitivity to charge level was shown through varying the charge on a Development Model Loop Heat Pipe (DM LHP) and evaluating performance at various fill levels. At lower fills similar to the original charge in the flight units, the same poor performance was observed. When the flight units were re-designed and filled to the levels similar to the initial successful DM LHP test, the flight units also successfully fulfilled all requirements. This final flight Acceptance test assessed performance with respect to startup, low power operation, conductance, and control heater power, and steady state control. The results of the testing showed that both LHPs operated within specification. Startup on one of the LHPs was better than the other LHP because of the starter heater placement and a difference in evaporator design. These differences resulted in a variation in the achieved superheat prior to startup. The LHP with

  18. The Usefulness and Feasibility of Mobile Interface in Tuberculosis Notification (MITUN) Voice Based System for Notification of Tuberculosis by Private Medical Practitioners – A Pilot Project

    Science.gov (United States)

    Velayutham, Banurekha; Thomas, Beena; Nair, Dina; Thiruvengadam, Kannan; Prashant, Suma; Kittusami, Sathyapriya; Vijayakumar, Harivanzan; Chidambaram, Meenachi; Shivakumar, Shri Vijay Bala Yogendra; Jayabal, Lavanya; Jhunjhunwala, Ashok; Swaminathan, Soumya

    2015-01-01

    Introduction Tuberculosis (TB) is a notifiable disease and health care providers are required to notify every TB case to local authorities. We conducted a pilot study to determine the usefulness and feasibility of mobile interface in TB notification (MITUN) voice based system for notification of TB cases by private medical practitioners. Methodology The study was conducted during September 2013 to October 2014 in three zones of Chennai, an urban setting in South India. Private clinics wherein services are provided by single private medical practitioners were approached. The steps involved in MITUN included: Registration of the practitioners and notification of TB cases by them through voice interactions. Pre and post-intervention questionnaires were administered to collect information on TB notification practices and feasibility of MITUN after an implementation period of 6 months. Results A total of 266 private medical practitioners were approached for the study. Of them, 184 (69%) participated in the study; of whom 11 (6%) practitioners used MITUN for TB notification. Reasons for not using MITUN include lack of time, referral of patients to government facility, issues related to patient confidentiality and technical problems. Suggestions for making mobile phone based TB notification process user-friendly included reducing call duration, including only crucial questions and using missed call or SMS options. Conclusion The performance (feasibility and usefulness) of MITUN voice based system for TB notification in the present format was sub-optimal. Perceived problems, logistical and practical issues preclude scale–up of notification of TB by private practitioners. PMID:26376197

  19. The Usefulness and Feasibility of Mobile Interface in Tuberculosis Notification (MITUN Voice Based System for Notification of Tuberculosis by Private Medical Practitioners--A Pilot Project.

    Directory of Open Access Journals (Sweden)

    Banurekha Velayutham

    Full Text Available Tuberculosis (TB is a notifiable disease and health care providers are required to notify every TB case to local authorities. We conducted a pilot study to determine the usefulness and feasibility of mobile interface in TB notification (MITUN voice based system for notification of TB cases by private medical practitioners.The study was conducted during September 2013 to October 2014 in three zones of Chennai, an urban setting in South India. Private clinics wherein services are provided by single private medical practitioners were approached. The steps involved in MITUN included: Registration of the practitioners and notification of TB cases by them through voice interactions. Pre and post-intervention questionnaires were administered to collect information on TB notification practices and feasibility of MITUN after an implementation period of 6 months.A total of 266 private medical practitioners were approached for the study. Of them, 184 (69% participated in the study; of whom 11 (6% practitioners used MITUN for TB notification. Reasons for not using MITUN include lack of time, referral of patients to government facility, issues related to patient confidentiality and technical problems. Suggestions for making mobile phone based TB notification process user-friendly included reducing call duration, including only crucial questions and using missed call or SMS options.The performance (feasibility and usefulness of MITUN voice based system for TB notification in the present format was sub-optimal. Perceived problems, logistical and practical issues preclude scale-up of notification of TB by private practitioners.

  20. Scientific Bases of Human-Machine Communication by Voice

    Science.gov (United States)

    Schafer, Ronald W.

    1995-10-01

    The scientific bases for human-machine communication by voice are in the fields of psychology, linguistics, acoustics, signal processing, computer science, and integrated circuit technology. The purpose of this paper is to highlight the basic scientific and technological issues in human-machine communication by voice and to point out areas of future research opportunity. The discussion is organized around the following major issues in implementing human-machine voice communication systems: (i) hardware/software implementation of the system, (ii) speech synthesis for voice output, (iii) speech recognition and understanding for voice input, and (iv) usability factors related to how humans interact with machines.

  1. Digital compensation techniques for the effects of time lag in closed-loop simulation using the 6 DOF motion system

    Science.gov (United States)

    Brown, R.

    1982-01-01

    Efforts are continued to develop digital filter compensation schemes for the correction of momentum gains observed in the closed loop simulation of the docking of two satellites using the 6 DOF motion system. Several filters that work well for small delays ( .100ms) and a non-preloaded probe are discussed.

  2. Analysis of laser energy characteristics of laser guided weapons based on the hardware-in-the-loop simulation system

    Science.gov (United States)

    Zhu, Yawen; Cui, Xiaohong; Wang, Qianqian; Tong, Qiujie; Cui, Xutai; Li, Chenyu; Zhang, Le; Peng, Zhong

    2016-11-01

    The hardware-in-the-loop simulation system, which provides a precise, controllable and repeatable test conditions, is an important part of the development of the semi-active laser (SAL) guided weapons. In this paper, laser energy chain characteristics were studied, which provides a theoretical foundation for the SAL guidance technology and the hardware-in-the-loop simulation system. Firstly, a simplified equation was proposed to adjust the radar equation according to the principles of the hardware-in-the-loop simulation system. Secondly, a theoretical model and calculation method were given about the energy chain characteristics based on the hardware-in-the-loop simulation system. We then studied the reflection characteristics of target and the distance between the missile and target with major factors such as the weather factors. Finally, the accuracy of modeling was verified by experiment as the values measured experimentally generally follow the theoretical results from the model. And experimental results revealed that ratio of attenuation of the laser energy exhibited a non-linear change vs. pulse number, which were in accord with the actual condition.

  3. Optimum bleeding rate of open loop ground source heat pump systems determined by hydrogeological modeling in Korea

    Science.gov (United States)

    Jeon, W. H.; Kim, N.; Lee, J. Y.

    2014-12-01

    This study aims to evaluate the influence of open loop ground source heat pump systems operation on hydrological conditions of aquifer. Test bed is located in Chuncheon, Korea. The step drawdown test was conducted in five stages for 300 minutes. The variation of groundwater levels by open loop ground source heat pump systems operation was estimated using Visual MODFLOW. Transmissivity ranged from 2.02×10-4 to 9.36×10-4, and storage coefficient ranged from 0.00067 to 0.021. The amount of optimum bleeding was calculated to be 240 m3/day. When bleeding will be 50, 90, 240 and 450 m3/day for 5 years, groundwater levels may decrease 1.84, 3.31, 8.89 and 17.0 m, respectively. If the amount of bleeding is 50 m3/day, the influence of bleeding will not reach the boundary regions of the Soyang River after 5 years. Regarding the open loop ground source heat pump system installed at the test bed, the amount of optimum bleeding in accordance with the stand are proposed by the government is 90 m3/day, which is 20% of the 450 m3/day circulation quantity of the system. However, if continuous bleeding of more than 90 m3/day occurs, then the radius of influence is expected to reach the boundary regions of the Soyang River after 5 years. These results indicate that amount of optimum bleeding differ in each open loop ground soured heat pump system. Therefore, the debate for the amount of optimum bleeding in open loop ground source heat pump systems is demanded. This work is supported by the Energy Efficiency and Resources of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy (No.20123040110010).

  4. Preliminary assessment of a combined passive safety system for typical 3-loop PWR CPR1000

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zijiang; Shan, Jianqiang, E-mail: jqshan@mail.xjtu.edu.cn; Gou, Junli

    2017-03-15

    Highlights: • A combined passive safety system was placed on a typical 3-loop PWR CPR1000. • Three accident analyses show the three different accident mitigation methods of the passive safety system. • The three mitigation methods were proved to be useful. - Abstract: As the development of the nuclear industry, passive technology turns out to be a remarkable characteristic of advanced nuclear power plants. Since the 20th century, much effort has been given to the passive technology, and a number of evolutionary passive systems have developed. Thoughts have been given to upgrade the existing reactors with passive systems to meet stricter safety demands. In this paper, the CPR1000 plant, which is one kind of mature pressurized water reactor plants in China, is improved with some passive systems to enhance safety. The passive systems selected are as follows: (1) the reactor makeup tank (RMT); (2) the advanced accumulator (A-ACC); (3) the in-containment refueling water storage tank (IRWST); (4) the passive emergency feed water system (PEFS), which is installed on the secondary side of SGs; (5) the passive depressurization system (PDS). Although these passive components is based on the passive technology of some advanced reactors, their structural and trip designs are adjusted specifically so that it could be able to mitigate accidents of the CPR1000. Utilizing the RELAP5/MOD3.3 code, accident analyses (small break loss of coolant accident, large break loss of coolant accident, main feed water line break accident) of this improved CPR1000 plant were presented to demonstrate three different accident mitigation methods of the safety system and to test whether the passive safety system preformed its function well. In the SBLOCA, all components of the passive safety system were put into work sequentially, which prevented the core uncover. The LBLOCA analysis illustrates the contribution of the A-ACCs whose small-flow-rate injection can control the maximum cladding

  5. Design and Benchmarking of a Network-In-the-Loop Simulation for Use in a Hardware-In-the-Loop System

    Science.gov (United States)

    Aretskin-Hariton, Eliot D.; Thomas, George Lindsey; Culley, Dennis E.; Kratz, Jonathan L.

    2017-01-01

    Distributed engine control (DEC) systems alter aircraft engine design constraints be- cause of fundamental differences in the input and output communication between DEC and centralized control architectures. The change in the way communication is implemented may create new optimum engine-aircraft configurations. This paper continues the exploration of digital network communication by demonstrating a Network-In-the-Loop simulation at the NASA Glenn Research Center. This simulation incorporates a real-time network protocol, the Engine Area Distributed Interconnect Network Lite (EADIN Lite), with the Commercial Modular Aero-Propulsion System Simulation 40k (C-MAPSS40k) software. The objective of this study is to assess digital control network impact to the control system. Performance is evaluated relative to a truth model for large transient maneuvers and a typical flight profile for commercial aircraft. Results show that a decrease in network bandwidth from 250 Kbps (sampling all sensors every time step) to 40 Kbps, resulted in very small differences in control system performance.

  6. Offshore Measurement System for Wave Power—Using Current Loop Feedback

    Directory of Open Access Journals (Sweden)

    Liselotte Ulvgård

    2016-12-01

    Full Text Available This paper presents the design and testing of a measurement system for wave power generators. The work is part of a project to build a robust and cheap measurement system for offshore monitoring of wave power farms. Due to the harsh offshore environment, low accessibility and high cost for installation and maintenance, it is of key importance to minimize power consumption, complexity and cost of each measurement unit. For the first prototype, the objective was to measure voltage, current and translator position inside the linear wave power generator. For this, two printed circuit boards (PCBs were developed, using a two wire current loop transmitter setup. They were tested separately and in a three phase setup inside a wave power generator during onshore tests. To ensure stability, speed and accuracy in the signal transfer, the PCBs were tested for linearity, frequency response and step response. In addition, power consumption was measured, for operational time evaluation. Results show good agreement between expected and measured performance, with an input range of ±1560 V and ±420 A for alternating current measurements and a bandwidth of 10 kHz and 7 kHz, for voltage and current measurements, respectively. The power consumption was measured to 0.5 W for each measurement unit, at 24 V feed.

  7. System identification of closed-loop cardiovascular control: effects of posture and autonomic blockade

    Science.gov (United States)

    Mullen, T. J.; Appel, M. L.; Mukkamala, R.; Mathias, J. M.; Cohen, R. J.

    1997-01-01

    We applied system identification to the analysis of fluctuations in heart rate (HR), arterial blood pressure (ABP), and instantaneous lung volume (ILV) to characterize quantitatively the physiological mechanisms responsible for the couplings between these variables. We characterized two autonomically mediated coupling mechanisms [the heart rate baroreflex (HR baroreflex) and respiratory sinus arrhythmia (ILV-HR)] and two mechanically mediated coupling mechanisms [the blood pressure wavelet generated with each cardiac contraction (circulatory mechanics) and the direct mechanical effects of respiration on blood pressure (ILV-->ABP)]. We evaluated the method in humans studied in the supine and standing postures under control conditions and under conditions of beta-sympathetic and parasympathetic pharmacological blockades. Combined beta-sympathetic and parasympathetic blockade abolished the autonomically mediated couplings while preserving the mechanically mediated coupling. Selective autonomic blockade and postural changes also altered the couplings in a manner consistent with known physiological mechanisms. System identification is an "inverse-modeling" technique that provides a means for creating a closed-loop model of cardiovascular regulation for an individual subject without altering the underlying physiological control mechanisms.

  8. [Open loop gain of the CO2-ventilation feedback control system in chronic obstructive pulmonary disease].

    Science.gov (United States)

    Kimura, H; Kunitomo, F; Okita, S; Tojima, H; Tatsumi, K; Kuriyama, T; Hashizume, I; Honda, Y

    1989-07-01

    To evaluate the stability of the CO2-ventilation feedback system, we measured its open loop gain (G) in 12 patients with chronic obstructive pulmonary disease (COPD) and 15 control subjects. Then, we compared G to the conventional slope of the CO2-ventilation response line (S) and that of the metabolic hyperbola (SL). G was determined as the ratio of S to SL by applying external dead space of 250 and 500 ml. G, S and 1/SL in the control and the COPD were +17.1 +/- 7.2 (Mean +/- SD), 1.70 +/- 0.75 L.min-1.Torr-1 and -10.4 +/- 2.0 L-1.min.Torr, and -7.2 +/- 3.3, 0.48 +/- 0.27 L.min-1.Torr-1 and -16.1 +/- 6.4 L-1.min.Torr, respectively. G was significantly correlated with S in both groups, but that was not the case in 1/SL. The magnitude of G and S in COPD was about 42% and 28% of the control, indicating that G was maintained more stable than S. These data suggest that the decreased G in the COPD resulted from insufficient compensation of ventilatory drive, whereas 1/SL increased higher than the control. We conclude that G can be used to indicate the stability of the CO2-ventilation feedback system better than S.

  9. Using Pyrolysis and its Bioproducts to Help Close the Loop in Sustainable Life Support Systems

    Science.gov (United States)

    McCoy, LaShelle E.

    2012-01-01

    The next step in human exploration of space is beyond low Earth orbit and possibly to sites such as the Moon and Mars. Resupply of critical life support components for missions such as these are difficult or impossible. Life support processes for closing the loop of water, oxygen and carbon have to be identified .. Currently, there are many technologies proposed for terrestrial missions for waste, water, air processing and the creation of consumables. There are a variety of different approaches, but few address all of these issues simultaneously. One candidate is pyrolysis; a method where waste streams can be heated in the absence of oxygen to undergo a thermochemical conversion producing a series of bioproducts. Bioproducts like biochar made from non-edible biomass and human solid waste can possibly provide valuable benefits such as waste reduction, regolith fertilization for increased food production, and become a consumable for water processing and air revitalization systems. Syngas containing hydrogen, carbon monoxide and cbon dioxide, can be converted to methane and dimethyl ether to create propellants. Bio-oils can be utilized as a heating fuel or fed to bioreactors that utilize oil-eating microbes. Issues such as carbon sequestration and subsequent carbon balance of the closed system and identifying ideal process methods to achieve the highest quality products, whilst being energy friendly, will also be addressed.

  10. Structure of force networks in tapped particulate systems of disks and pentagons. I. Clusters and loops

    Science.gov (United States)

    Pugnaloni, Luis A.; Carlevaro, C. Manuel; Kramár, M.; Mischaikow, K.; Kondic, L.

    2016-06-01

    The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this and the companion paper [Kondic et al., Phys. Rev. E 93, 062903 (2016), 10.1103/PhysRevE.93.062903], we consider two-dimensional simulations of tapped systems built from frictional disks and pentagons, and study the structure of the force networks of granular packings by considering network's topology as force thresholds are varied. We show that the number of clusters and loops observed in the force networks as a function of the force threshold are markedly different for disks and pentagons if the tangential contact forces are considered, whereas they are surprisingly similar for the network defined by the normal forces. In particular, the results indicate that, overall, the force network is more heterogeneous for disks than for pentagons. Such differences in network properties are expected to lead to different macroscale response of the considered systems, despite the fact that averaged measures (such as force probability density function) do not show any obvious differences. Additionally, we show that the states obtained by tapping with different intensities that display similar packing fraction are difficult to distinguish based on simple topological invariants.

  11. The open-plus-closed loop (OPCL) method for chaotic systems with multiple strange attractors

    Institute of Scientific and Technical Information of China (English)

    Song Yun-Zhong

    2007-01-01

    Based on the open-plus-closed-loop (OPCL) control method a systematic and comprehensive controller is presented in this paper for a chaotic system, that is, the Newton-Leipnik equation with two strange attractors: the upper attractor(UA) and the lower attractor (LA). Results show that the final structure of the suggested controller for stabilization has a simple linear feedback form. To keep the integrity of the suggested approach, the globality proof of the basins of entrainment is also provided. In virtue of the OPCL technique, three different kinds of chaotic controls of the system are investigated, separately: the original control forcing the chaotic motion to settle down to the origin from an arbitrary position of the phase space; the chaotic intra-attractor control for stabilizing the equilibrium points only belonging to the upper chaotic attractor or the lower chaotic one; and the inter-attractor control for compelling the chaotic oscillation from one basin to another one. Both theoretical analysis and simulation results verify the validity of the proposed means.

  12. Closed-Loop Control of Chemical Injection Rate for a Direct Nozzle Injection System

    Directory of Open Access Journals (Sweden)

    Xiang Cai

    2016-01-01

    Full Text Available To realize site-specific and variable-rate application of agricultural pesticides, accurately metering and controlling the chemical injection rate is necessary. This study presents a prototype of a direct nozzle injection system (DNIS by which chemical concentration transport lag was greatly reduced. In this system, a rapid-reacting solenoid valve (RRV was utilized for injecting chemicals, driven by a pulse-width modulation (PWM signal at 100 Hz, so with varying pulse width the chemical injection rate could be adjusted. Meanwhile, a closed-loop control strategy, proportional-integral-derivative (PID method, was applied for metering and stabilizing the chemical injection rate. In order to measure chemical flow rates and input them into the controller as a feedback in real-time, a thermodynamic flowmeter that was independent of chemical viscosity was used. Laboratory tests were conducted to assess the performance of DNIS and PID control strategy. Due to the nonlinear input–output characteristics of the RRV, a two-phase PID control process obtained better effects as compared with single PID control strategy. Test results also indicated that the set-point chemical flow rate could be achieved within less than 4 s, and the output stability was improved compared to the case without control strategy.

  13. Carbon dioxide removal system for closed loop atmosphere revitalization, candidate sorbents screening and test results

    Science.gov (United States)

    Mattox, E. M.; Knox, J. C.; Bardot, D. M.

    2013-05-01

    Due to the difficulty and expense it costs to resupply manned-spacecraft habitats, a goal is to create a closed loop atmosphere revitalization system, in which precious commodities such as oxygen, carbon dioxide, and water are continuously recycled. Our aim is to test other sorbents for their capacity for future spacecraft missions, such as on the Orion spacecraft, or possibly lunar or Mars mission habitats to see if they would be better than the zeolite sorbents on the 4-bed molecular sieve. Some of the materials being tested are currently used for other industry applications. Studying these sorbents for their specific spacecraft application is different from that for applications on earth because in space, there are certain power, mass, and volume limitations that are not as critical on Earth. In manned-spaceflight missions, the sorbents are exposed to a much lower volume fraction of CO2 (0.6% volume CO2) than on Earth. LiLSX was tested for its CO2 capacity in an atmosphere like that of the ISS. Breakthrough tests were run to establish the capacities of these materials at a partial pressure of CO2 that is seen on the ISS. This paper discusses experimental results from benchmark materials, such as results previously obtained from tests on Grade 522, and the forementioned candidate materials for the Carbon Dioxide Removal Assembly (CDRA) system.

  14. Hardware-in-the-Loop Modeling and Simulation Methods for Daylight Systems in Buildings

    Science.gov (United States)

    Mead, Alex Robert

    This dissertation introduces hardware-in-the-loop modeling and simulation techniques to the daylighting community, with specific application to complex fenestration systems. No such application of this class of techniques, optimally combining mathematical-modeling and physical-modeling experimentation, is known to the author previously in the literature. Daylighting systems in buildings have a large impact on both the energy usage of a building as well as the occupant experience within a space. As such, a renewed interest has been placed on designing and constructing buildings with an emphasis on daylighting in recent times as part of the "green movement.''. Within daylighting systems, a specific subclass of building envelope is receiving much attention: complex fenestration systems (CFSs). CFSs are unique as compared to regular fenestration systems (e.g. glazing) in the regard that they allow for non-specular transmission of daylight into a space. This non-specular nature can be leveraged by designers to "optimize'' the times of the day and the days of the year that daylight enters a space. Examples of CFSs include: Venetian blinds, woven fabric shades, and prismatic window coatings. In order to leverage the non-specular transmission properties of CFSs, however, engineering analysis techniques capable of faithfully representing the physics of these systems are needed. Traditionally, the analysis techniques available to the daylighting community fall broadly into three classes: simplified techniques, mathematical-modeling and simulation, and physical-modeling and experimentation. Simplified techniques use "rules-of-thumb'' heuristics to provide insights for simple daylighting systems. Mathematical-modeling and simulation use complex numerical models to provide more detailed insights into system performance. Finally, physical-models can be instrumented and excited using artificial and natural light sources to provide performance insight into a daylighting system

  15. Real-Time Monitoring and Prediction of the Pilot Vehicle System (PVS) Closed-Loop Stability

    Science.gov (United States)

    Mandal, Tanmay Kumar

    Understanding human control behavior is an important step for improving the safety of future aircraft. Considerable resources are invested during the design phase of an aircraft to ensure that the aircraft has desirable handling qualities. However, human pilots exhibit a wide range of control behaviors that are a function of external stimulus, aircraft dynamics, and human psychological properties (such as workload, stress factor, confidence, and sense of urgency factor). This variability is difficult to address comprehensively during the design phase and may lead to undesirable pilot-aircraft interaction, such as pilot-induced oscillations (PIO). This creates the need to keep track of human pilot performance in real-time to monitor the pilot vehicle system (PVS) stability. This work focused on studying human pilot behavior for the longitudinal axis of a remotely controlled research aircraft and using human-in-the-loop (HuIL) simulations to obtain information about the human controlled system (HCS) stability. The work in this dissertation is divided into two main parts: PIO analysis and human control model parameters estimation. To replicate different flight conditions, this study included time delay and elevator rate limiting phenomena, typical of actuator dynamics during the experiments. To study human control behavior, this study employed the McRuer model for single-input single-output manual compensatory tasks. McRuer model is a lead-lag controller with time delay which has been shown to adequately model manual compensatory tasks. This dissertation presents a novel technique to estimate McRuer model parameters in real-time and associated validation using HuIL simulations to correctly predict HCS stability. The McRuer model parameters were estimated in real-time using a Kalman filter approach. The estimated parameters were then used to analyze the stability of the closed-loop HCS and verify them against the experimental data. Therefore, the main contribution of

  16. Successful hardware-in-the-loop support of the Longbow/HELLFIRE modular missile system

    Science.gov (United States)

    Ray, Jerry A.; Larson, Gerald A.; Terry, John E.

    2000-07-01

    The Air-to-Ground Missiles Systems (AGMS) Project Management Office (PMO) chose to invest in hardware-in-the-loop (HWIL) simulation as an integral part of their Longbow/HELLFIRE (Helicopter Launched, Fire-and-Forget) Modular Missile System program throughout the development and production phases. This investment has resulted in two HWIL simulations, developed by the U.S. Army Aviation and Missile Command (AMCOM) Missile Research Development and Engineering Center, that have had unprecedented success in program support from the early development through production phases. The Millimeter Simulation System 1 (MSS-1) facility is capable of edge-of- the-envelope performance analysis and verification using high- fidelity target, background, and countermeasures signature modeling. The System Test/Acceptance Facility (STAF), developed in partnership with Redstone Technical Test Center, tests full-up missiles for production lot acceptance. Between these two facilities, HWIL simulation is responsible for pre- flight confidence testing of missile hardware and software, software independent verification and validation (IV&V) testing, comprehensive performance evaluation, component verification, production lot acceptance, and data gathering for the shelf life extension program. One payoff of the MSS-1 HWIL investment has been an extremely effective flight test program with MSS-1 receiving credit for saving three flight tests and documenting over 40 failure modes. With the advent of the Performance Based Specification, the MSS-1 has become involved in continuous verification of high level specifications since contractor controlled, low-level specifications are subject to change. The STAF has saved 8 million annually through providing a non-destructive lot acceptance-testing paradigm, and further benefited the production phase by discovering three production problems. This paper will highlight the innovative uses of HWIL simulation as utilized in the Longbow/HELLFIRE program and

  17. Developing an EEG based On-line Closed-loop Lapse Detection and Mitigation System

    Directory of Open Access Journals (Sweden)

    Yu-Te eWang

    2014-10-01

    Full Text Available In America, sixty percent of adults reported that they have driven a motor vehicle while feeling drowsy, and at least 15-20% of fatal car accidents are fatigue-related. This study translates previous laboratory-oriented neurophysiological research to design, develop, and test an On-line Closed-loop Lapse Detection and Mitigation (OCLDM System featuring a mobile wireless dry-sensor EEG headgear and a cell-phone based real-time EEG processing platform. Eleven subjects participated in an event-related lane-keeping task, in which they were instructed to manipulate a randomly deviated, fixed-speed cruising car on a 4-lane highway. This was simulated in a 1st person view with an 8-screen and 8-projector immersive virtual-realty environment. When the subjects experienced lapses or failed to respond to events during the experiment, auditory feedback was delivered to rectify the performance decrements. However, the arousing auditory signals were not always effective. The EEG spectra exhibited statistically significant differences between effective and ineffective arousing signals, suggesting that EEG spectra could be used as a countermeasure of the efficacy of arousing signals. In this on-line pilot study, the proposed OCLDM System was able to continuously detect EEG signatures of fatigue, deliver arousing feedback to subjects suffering momentary cognitive lapses, and assess the efficacy of the feedback in near real-time to rectify cognitive lapses. The on-line testing results of the OCLDM System validated the efficacy of the arousing signals in improving subjects' response times to the subsequent lane-departure events. This study may lead to a practical on-line lapse detection and mitigation system in real-world environments.

  18. Voice handicap in singers.

    Science.gov (United States)

    Murry, Thomas; Zschommler, Anne; Prokop, Jan

    2009-05-01

    The study aimed to determine the differences in responses to the Voice Handicap Index (VHI-10) between singers and nonsingers and to evaluate the ranked order differences of the VHI-10 statements for both groups. The VHI-10 was modified to include statements related to the singing voice for comparison to the original VHI-10. Thirty-five nonsingers with documented voice disorders responded to the VHI-10. A second group, consisting of 35 singers with voice complaints, responded to the VHI-10 with three statements added specifically addressing the singing voice. Data from both groups were analyzed in terms of overall subject self-rating of voice handicap and the rank order of statements from least to most important. The difference between the mean VHI-10 for the singers and nonsingers was not statistically significant, thus, supporting the validity of the VHI-10. However, the 10 statements were ranked differently in terms of their importance by both groups. In addition, when three statements related specifically to the singing voice were substituted in the original VHI-10, the singers judged their voice problem to be more severe than when using the original VHI-10. The type of statements used to assess self-perception of voice handicap may be related to the subject population. Singers with voice problems do not rate their voices to be more handicapped than nonsingers unless statements related specifically to singing are included.

  19. Maryland Public School Standards for Telecommunications Distribution Systems: Infrastructure Design for Voice, Video, and Data Communications.

    Science.gov (United States)

    Maryland State Dept. of Education, Baltimore. School Facilities Branch.

    Telecommunications infrastructure has the dual challenges of maintaining quality while accommodating change, issues that have long been met through a series of implementation standards. This document is designed to ensure that telecommunications systems within the Maryland public school system are also capable of meeting both challenges and…

  20. Design and Implementation of Monophones and Triphones-Based Speech Recognition Systems for Voice Activated Telephony

    Directory of Open Access Journals (Sweden)

    Rupayan Das

    2013-07-01

    Full Text Available Speech recognition is the ability of a machine or program to convert spoken words into its equivalent text form. Nowadays, most recognition systems use Hidden Markov Models for modeling the spoken utterances. In this paper we have implemented two speaker independent speech recognition systems which include all the words required for dialing a phone. The systems contain 42 words including digits from zero to nine and also include names of 20 persons. A total of 16,800 utterances have been used for training each system. The two systems are able to recognize continuous speech and it is implemented with the help of monophones and triphones using HTK. Experimental results show an accuracy of 74.11% for monophones based models and 93.77% for triphones based models.

  1. Loop heat pipe for thermal conditions supplying systems for elements of radio electronic equipment

    Directory of Open Access Journals (Sweden)

    Khayrnasov S. М.

    2010-06-01

    Full Text Available The loop heat pipe design presented in the article provides the transmission of thermal flow up to 105 W when working in temperature range of 20—90°C and on any space orientation.

  2. Coxeter-Chein Loops

    CERN Document Server

    Blok, Rieuwert J

    2011-01-01

    In 1974 Orin Chein discovered a new family of Moufang loops which are now called Chein loops. Such a loop can be created from any group $W$ together with $\\mathbb{Z}_2$ by a variation on a semi-direct product. We study these loops in the case where $W$ is a Coxeter group and show that it has what we call a Chein-Coxeter system, a small set of generators of order 2, together with a set of relations closely related to the Coxeter relations and Chein relations. As a result we are able to give amalgam presentations for Coxeter-Chein loops. This is to our knowledge the first such presentation for a Moufang loop.

  3. Coxeter-Chein Loops

    OpenAIRE

    Blok, Rieuwert J.; Gagola III, Stephen

    2011-01-01

    In 1974 Orin Chein discovered a new family of Moufang loops which are now called Chein loops. Such a loop can be created from any group $W$ together with $\\mathbb{Z}_2$ by a variation on a semi-direct product. We study these loops in the case where $W$ is a Coxeter group and show that it has what we call a Chein-Coxeter system, a small set of generators of order 2, together with a set of relations closely related to the Coxeter relations and Chein relations. As a result we are able to give am...

  4. Mobile Agents: A Distributed Voice-Commanded Sensory and Robotic System for Surface EVA Assistance

    Science.gov (United States)

    Clancey, William J.; Sierhuis, Maarten; Alena, Rick; Crawford, Sekou; Dowding, John; Graham, Jeff; Kaskiris, Charis; Tyree, Kim S.; vanHoof, Ronnie

    2003-01-01

    A model-based, distributed architecture integrates diverse components in a system designed for lunar and planetary surface operations: spacesuit biosensors, cameras, GPS, and a robotic assistant. The system transmits data and assists communication between the extra-vehicular activity (EVA) astronauts, the crew in a local habitat, and a remote mission support team. Software processes ("agents"), implemented in a system called Brahms, run on multiple, mobile platforms, including the spacesuit backpacks, all-terrain vehicles, and robot. These "mobile agents" interpret and transform available data to help people and robotic systems coordinate their actions to make operations more safe and efficient. Different types of agents relate platforms to each other ("proxy agents"), devices to software ("comm agents"), and people to the system ("personal agents"). A state-of-the-art spoken dialogue interface enables people to communicate with their personal agents, supporting a speech-driven navigation and scheduling tool, field observation record, and rover command system. An important aspect of the engineering methodology involves first simulating the entire hardware and software system in Brahms, and then configuring the agents into a runtime system. Design of mobile agent functionality has been based on ethnographic observation of scientists working in Mars analog settings in the High Canadian Arctic on Devon Island and the southeast Utah desert. The Mobile Agents system is developed iteratively in the context of use, with people doing authentic work. This paper provides a brief introduction to the architecture and emphasizes the method of empirical requirements analysis, through which observation, modeling, design, and testing are integrated in simulated EVA operations.

  5. Development and hardware-in-the-loop test of a guidance, navigation and control system for on-orbit servicing

    Science.gov (United States)

    Benninghoff, Heike; Rems, Florian; Boge, Toralf

    2014-09-01

    The rendezvous phase is one of the most important phases in future orbital servicing missions. To ensure a safe approach to a non-cooperative target satellite, a guidance, navigation and control system which uses measurements from optical sensors like cameras was designed and developed. During ground-based rendezvous, stability problems induced by delayed position measurements can be compensated by using a specially adapted navigation filter. Within the VIBANASS (VIsion BAsed NAvigation Sensor System) test campaign, hardware-in-the-loop tests on the terrestrial, robotic based facility EPOS 2.0 were performed to test and verify the developed guidance, navigation and control algorithms using real sensor measurements. We could demonstrate several safe rendezvous test cases in a closed loop mode integrating the VIBANASS camera system and the developed guidance, navigation and control system to a dynamic rendezvous simulation.

  6. Geoscience Laser Altimeter System (GLAS) Loop Heat Pipes: An Eventual First Year On-Orbit

    Science.gov (United States)

    Grob, E.; Baker, C.; McCarthy, T.

    2004-01-01

    Goddard Space Flight Center's Geoscience Laser Altimeter System (GLAS) is the sole scientific instrument on the Ice, Cloud and land Elevation Satellite (ICESat) that was launched on January 12, 2003 from Vandenberg AFB. A thermal control architecture based on propylene Loop Heat Pipe technology was developed to provide selectable/stable temperature control for the lasers and other electronics over the widely varying mission environment. Following a nominal LHP and instrument start-up, the mission was interrupted with the failure of the first laser after only 36 days of operation. During the 5-month failure investigation, the two GLAS LHPs and the electronics operated nominally, using heaters as a substitute for the laser heat load. Just prior to resuming the mission, following a seasonal spacecraft yaw maneuver, one of the LHPs deprimed and created a thermal runaway condition that resulted in an emergency shutdown of the GLAS instrument. This paper presents details of the LHP anomaly, the resulting investigation and recovery, along with on-orbit flight data during these critical events.

  7. System identification of closed-loop cardiovascular control mechanisms: diabetic autonomic neuropathy

    Science.gov (United States)

    Mukkamala, R.; Mathias, J. M.; Mullen, T. J.; Cohen, R. J.; Freeman, R.

    1999-01-01

    We applied cardiovascular system identification (CSI) to characterize closed-loop cardiovascular regulation in patients with diabetic autonomic neuropathy (DAN). The CSI method quantitatively analyzes beat-to-beat fluctuations in noninvasively measured heart rate, arterial blood pressure (ABP), and instantaneous lung volume (ILV) to characterize four physiological coupling mechanisms, two of which are autonomically mediated (the heart rate baroreflex and the coupling of respiration, measured in terms of ILV, to heart rate) and two of which are mechanically mediated (the coupling of ventricular contraction to the generation of the ABP wavelet and the coupling of respiration to ABP). We studied 37 control and 60 diabetic subjects who were classified as having minimal, moderate, or severe DAN on the basis of standard autonomic tests. The autonomically mediated couplings progressively decreased with increasing severity of DAN, whereas the mechanically mediated couplings were essentially unchanged. CSI identified differences between the minimal DAN and control groups, which were indistinguishable based on the standard autonomic tests. CSI may provide a powerful tool for assessing DAN.

  8. Phase-Locked Loop Noise Reduction via Phase Detector Implementation for Single-Phase Systems

    Energy Technology Data Exchange (ETDEWEB)

    Thacker, Timothy [Virginia Polytechnic Institute and State University (Virginia Tech); Boroyevich, Dushan [Virginia Polytechnic Institute and State University (Virginia Tech); Burgos, Rolando [ABB; Wang, Fei [ORNL

    2011-01-01

    A crucial component of grid-connected converters is the phase-locked loop (PLL) control subsystem that tracks the grid voltage's frequency and phase angle. Therefore, accurate fast-responding PLLs for control and protection purposes are required to provide these measurements. This paper proposes a novel feedback mechanism for single-phase PLL phase detectors using the estimated phase angle. Ripple noise appearing in the estimated frequency, most commonly the second harmonic under phase-lock conditions, is reduced or eliminated without the use of low-pass filters, which can cause delays to occur and limits the overall performance of the PLL response to dynamic changes in the system. The proposed method has the capability to eliminate the noise ripple entirely and, under extreme line distortion conditions, can reduce the ripple by at least half. Other modifications implemented through frequency feedback are shown to decrease the settling time of the PLL up to 50%. Mathematical analyses with the simulated and experimental results are provided to confirm the validity of the proposed methods.

  9. The Bellevue Classification System: nursing's voice upon the library shelves*†

    Science.gov (United States)

    Mages, Keith C

    2011-01-01

    This article examines the inspiration, construction, and meaning of the Bellevue Classification System (BCS), created during the 1930s for use in the Bellevue School of Nursing Library. Nursing instructor Ann Doyle, with assistance from librarian Mary Casamajor, designed the BCS after consulting with library leaders and examining leading contemporary classification systems, including the Dewey Decimal Classification and Library of Congress, Ballard, and National Health Library classification systems. A close textual reading of the classes, subclasses, and subdivisions of these classification systems against those of the resulting BCS, reveals Doyle's belief that the BCS was created not only to organize the literature, but also to promote the burgeoning intellectualism and professionalism of early twentieth-century American nursing. PMID:21243054

  10. Design and Implementation of 12V/24V Closed loop Boost Converter for Solar Powered LED Lighting System

    Directory of Open Access Journals (Sweden)

    P.Sathya

    2013-02-01

    Full Text Available this paper presents the design and implementation of high performance closed loop Boost converter for solar powered HBLED lighting system. The proposed system consists of solar photovoltaic module, a closed loop boost converter and LED lighting module. The closed loop boost converter is used to convert a low level dc input voltage from solar PV module to a high level dc voltage required for the load. To regulate the output of the converter, closed loop voltage feedback technique is used. The feedback voltage is compared with a reference voltage and a control signal is generated and amplified. The amplified signal is fed to 555 Timer which in turn generates a PWM signal which controls the switching of MOSFET. Thus by switching of MOSFET it would try to keep output as constant. Initially the boost converter, timer circuit, amplifier circuit and LED light circuits are designed, simulated and finally implemented in printed circuit board. The simulation studies are carried out in MULTISIM. Theexperimental results for solar PV and boost converter obtained in both software and hardware are presented here.

  11. Test Requirements and Conceptual Design for a Potassium Test Loop to Support an Advanced Potassium Rankine Cycle Power Conversion Systems

    Energy Technology Data Exchange (ETDEWEB)

    Yoder, JR.G.L.

    2006-03-08

    Parameters for continuing the design and specification of an experimental potassium test loop are identified in this report. Design and construction of a potassium test loop is part of the Phase II effort of the project ''Technology Development Program for an Advanced Potassium Rankine Power Conversion System''. This program is supported by the National Aeronautics and Space Administration. Design features for the potassium test loop and its instrumentation system, specific test articles, and engineered barriers for ensuring worker safety and protection of the environment are described along with safety and environmental protection requirements to be used during the design process. Information presented in the first portion of this report formed the basis to initiate the design phase of the program; however, the report is a living document that can be changed as necessary during the design process, reflecting modifications as additional design details are developed. Some portions of the report have parameters identified as ''to be determined'' (TBD), reflecting the early stage of the overall process. In cases where specific design values are presently unknown, the report attempts to document the quantities that remain to be defined in order to complete the design of the potassium test loop and supporting equipment.

  12. Simulation of the MELiSSA closed loop system as a tool to define its integration strategy

    Science.gov (United States)

    Poughon, L.; Farges, B.; Dussap, C. G.; Godia, F.; Lasseur, C.

    2009-12-01

    Inspired by a terrestrial ecosystem, Micro-Ecological Life Support System Alternative (MELiSSA) is a project focused on a closed-loop life support system intended for future long-term manned missions (Moon and Mars bases). Started by the ESA in 1989, this 5-compartment concept has evolved through a mechanistic engineering approach designed to acquire both theoretical and technical knowledge. In its current state of development, the project can now start to demonstrate the MELiSSA loop concept at pilot scale. Thus, an integration strategy for a MELiSSA Pilot Plant (MPP) has been defined, describing the different test phases and connections between compartments. The integration steps are due to be started in 2008 and completed with a complete operational loop in 2015. The ultimate objective is to achieve a closed liquid and gas loop fulfiling 100% of oxygen requirements and at least 20% of food requirements for one-man. Although the integration logic could start with the most advanced processes in terms of knowledge and hardware development, this logic needs to be expanded to encompass a high-level simulation policy. This simulation exercise will make it possible to run effective demonstrations of each independent process, followed by progressive coupling with other processes in operational conditions mirroring as far as possible the final configuration. The theoretical approach described in this paper is based on mass balance models of each MELiSSA compartment which are used to simulate each integration step and the complete MPP loop itself. These simulations will help identify criticalities in each integration step and check consistency between objectives, flows, recycling efficiencies and sizing of the pilot reactors. An MPP scenario compatible with current knowledge on the operation of the pilot reactors was investigated, and the theoretical performances of the system were compared against the objectives assigned to the MPP. This scenario makes it possible to

  13. A randomized controlled trial demonstrates that a novel closed-loop propofol system performs better hypnosis control than manual administration.

    Science.gov (United States)

    Hemmerling, Thomas M; Charabati, Samer; Zaouter, Cedrick; Minardi, Carmelo; Mathieu, Pierre A

    2010-08-01

    The purpose of this randomized control trial was to determine the performance of a novel rule-based adaptive closed-loop system for propofol administration using the bispectral index (BIS(R)) and to compare the system's performance with manual administration. The effectiveness of the closed-loop system to maintain BIS close to a target of 45 was determined and compared with manual administration. After Institutional Review Board approval and written consent, 40 patients undergoing major surgery in a tertiary university hospital were allocated to two groups using computer-generated block randomization. In the Closed-loop group (n = 20), closed-loop control was used to maintain anesthesia at a target BIS of 45, and in the Control group (n = 20), propofol was administered manually to maintain the same BIS target. To evaluate each technique's performance in maintaining a steady level of hypnosis, the BIS values obtained during the surgical procedure were stratified into four clinical performance categories relative to the target BIS: 30% defined as excellent, good, poor, or inadequate control of hypnosis, respectively. The controller performance was compared using Varvel's controller performance indices. Data were compared using Fisher's exact test and the Mann-Whitney U test, P performance error and the median absolute performance error were significantly lower in the Closed-loop group compared with the Control group (-1.1 +/- 5.3% vs -10.7 +/- 13.1%; P = 0.004 and 9.1 +/- 1.9% vs 15.7 +/- 7.4%; P performance than manual administration of propofol. (Clinical Trials gov. NCT 01019746).

  14. Combining Eco-Efficiency and Eco-Effectiveness for Continuous Loop Beverage Packaging Systems: Lessons from the Carlsberg Circular Community

    DEFF Research Database (Denmark)

    Niero, Monia; Hauschild, Michael Zwicky; Hoffmeyer, Simon B.

    2017-01-01

    Eco-efficiency (i.e., increasing value while reducing resource use and pollution) can with advantage be combined with eco-effectiveness (i.e., maximizing the benefits to ecological and economical systems) to address the challenges posed by the circular economy in the design of circular industrial...... systems. We present a framework combining life cycle assessment (LCA) and the Cradle to Cradle® (C2C) certification program for the development of continuous loop packaging systems, which was conceived for aluminum cans in the context of the Carlsberg Circular Community. As a first step......, the environmentally optimal beverage packaging life cycle scenario is identified, both in terms of defined use and reuse. Second, the limiting factors are identified for the continuous use of materials in multiple loops, meeting the two requirements in the C2C certification process that address the material level (i...

  15. A closed-loop automatic control system for high-intensity acoustic test systems.

    Science.gov (United States)

    Slusser, R. A.

    1973-01-01

    Sound at sound pressure levels in the range from 130 to 160 dB is used in the investigation. Random noise is passed through a series of parallel filters, generally 1/3-octave wide. A basic automatic system is investigated because of preadjustment inaccuracies and high costs found in a study of a typical manually controlled acoustic testing system. The unit described has been successfully used in automatic acoustic tests in connection with the spacecraft tests for the Mariner 1971 program.

  16. A closed-loop dynamic simulation-based design method for articulated heavy vehicles with active trailer steering systems

    Science.gov (United States)

    Manjurul Islam, Md.; Ding, Xuejun; He, Yuping

    2012-05-01

    This paper presents a closed-loop dynamic simulation-based design method for articulated heavy vehicles (AHVs) with active trailer steering (ATS) systems. AHVs have poor manoeuvrability at low speeds and exhibit low lateral stability at high speeds. From the design point of view, there exists a trade-off relationship between AHVs' manoeuvrability and stability. For example, fewer articulation points and longer wheelbases will improve high-speed lateral stability, but they will degrade low-speed manoeuvrability. To tackle this conflicting design problem, a systematic method is proposed for the design of AHVs with ATS systems. In order to evaluate vehicle performance measures under a well-defined testing manoeuvre, a driver model is introduced and it 'drivers' the vehicle model to follow a prescribed route at a given speed. Considering the interactions between the mechanical trailer and the ATS system, the proposed design method simultaneously optimises the active design variables of the controllers and passive design variables of the trailer in a single design loop (SDL). Through the design optimisation of an ATS system for an AHV with a truck and a drawbar trailer combination, this SDL method is compared against a published two design loop method. The benchmark investigation shows that the former can determine better trade-off design solutions than those derived by the latter. This SDL method provides an effective approach to automatically implement the design synthesis of AHVs with ATS systems.

  17. Comparison of energy penalty in post-combustion and pre-combustion calcium looping systems using aspen plus

    Directory of Open Access Journals (Sweden)

    Wei Dai, Subhodeep Banerjee, Ramesh K. Agarwal

    2017-01-01

    Full Text Available Calcium looping (CaL is a recent technology that utilizes calcium oxide (CaO and the carbonation-calcination equilibrium reactions to capture carbon dioxide (CO2 from the flue stream of fossil fueled power plants. In this paper, system level simulations are developed in Aspen Plus to calculate the energy penalty of introducing calcium looping in a coal fired power plant. Both post-combustion and pre-combustion capture scenarios are investigated. The relationship between various flow ratios, the conversion rate of CaO, and the carbon capture efficiency is used to validate the Aspen Plus model for the calcium looping process; it agrees well with the experimental data and simulation results available in the literature. The simulation shows an increasing marginal energy penalty associated with an increase in the carbon capture efficiency, which limits the maximum carbon capture efficiency in real-world applications of calcium looping to between 95% and 98% before the energy penalty becomes too large.

  18. Singing voice outcomes following singing voice therapy.

    Science.gov (United States)

    Dastolfo-Hromack, Christina; Thomas, Tracey L; Rosen, Clark A; Gartner-Schmidt, Jackie

    2016-11-01

    The objectives of this study were to describe singing voice therapy (SVT), describe referred patient characteristics, and document the outcomes of SVT. Retrospective. Records of patients receiving SVT between June 2008 and June 2013 were reviewed (n = 51). All diagnoses were included. Demographic information, number of SVT sessions, and symptom severity were retrieved from the medical record. Symptom severity was measured via the 10-item Singing Voice Handicap Index (SVHI-10). Treatment outcome was analyzed by diagnosis, history of previous training, and SVHI-10. SVHI-10 scores decreased following SVT (mean change = 11, 40% decrease) (P singing lessons (n = 10) also completed an average of three SVT sessions. Primary muscle tension dysphonia (MTD1) and benign vocal fold lesion (lesion) were the most common diagnoses. Most patients (60%) had previous vocal training. SVHI-10 decrease was not significantly different between MTD and lesion. This is the first outcome-based study of SVT in a disordered population. Diagnosis of MTD or lesion did not influence treatment outcomes. Duration of SVT was short (approximately three sessions). Voice care providers are encouraged to partner with a singing voice therapist to provide optimal care for the singing voice. This study supports the use of SVT as a tool for the treatment of singing voice disorders. 4 Laryngoscope, 126:2546-2551, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

  19. A bioreactor system for the nitrogen loop in a Controlled Ecological Life Support System.

    Science.gov (United States)

    Saulmon, M M; Reardon, K F; Sadeh, W Z

    1996-01-01

    As space missions become longer in duration, the need to recycle waste into useful compounds rises dramatically. This problem can be addressed by the development of Controlled Ecological Life Support Systems (CELSS) (i.e., Engineered Closed/Controlled Eco-Systems (ECCES)), consisting of human and plant modules. One of the waste streams leaving the human module is urine. In addition to the reclamation of water from urine, recovery of the nitrogen is important because it is an essential nutrient for the plant module. A 3-step biological process for the recycling of nitrogenous waste (urea) is proposed. A packed-bed bioreactor system for this purpose was modeled, and the issues of reaction step segregation, reactor type and volume, support particle size, and pressure drop were addressed. Based on minimization of volume, a bioreactor system consisting of a plug flow immobilized urease reactor, a completely mixed flow immobilized cell reactor to convert ammonia to nitrite, and a plug flow immobilized cell reactor to produce nitrate from nitrite is recommended. It is apparent that this 3-step bioprocess meets the requirements for space applications.

  20. Wave-front correction of high-intensity fs laser beams by using closed-loop adaptive optics system

    Institute of Scientific and Technical Information of China (English)

    WANG; Zhaohua; JIN; Zhan; ZHENG; Jiaan; WANG; Peng; WEI; Zh

    2005-01-01

    We developed an adaptive optics system to correct the wave-front distortion of an intense fs laser beam from our multi-TW laser system, Jiguang II. In this paper, the instruments of the adaptive optical system are described and the experimental results of the closed-loop wave-front correction are presented. A distorted laser wave-front of 20 wavelengths of P-V values was corrected to 0.15 wavelength of P-V values. The beam quality of the laser system varies from 3.5 diffraction limit to 1.5 diffraction limit.

  1. 移动机器人实时语音控制的实现%Realization on the real-time voice control system for mobile robot

    Institute of Scientific and Technical Information of China (English)

    高美娟; 杨智鑫; 田景文

    2011-01-01

    Based on the study of speech recognition algorithms, the real-time voice control system for mobile robot has been designed and realized. Dynamic Time warping (DTW) algorithm was chosen for this system, and the programming has been finished with VC platform. To ensure the real-time property of the system, the automatic record system with voice switch was designed. The experiment confirmed that this system shows good effect in real-time speech control%通过对语音识别过程的研究,设计并制作开发了1套基于移动机器人的实时语音控制系统.采用了动态时间规整(DTW)算法作为核心识别方法,并使用VC完成了对各部分的软件编程.其中为了保证系统的实时性,特别设计了带有声控开关的自动录音系统.通过最后的实验证实了,系统可以很好的完成实时语音控制.

  2. System identification of dynamic closed-loop control of total peripheral resistance by arterial and cardiopulmonary baroreceptors

    Science.gov (United States)

    Aljuri, A. N.; Bursac, N.; Marini, R.; Cohen, R. J.

    2001-01-01

    Prolonged exposure to microgravity in space flight missions (days) impairs the mechanisms responsible for defense of arterial blood pressure (ABP) and cardiac output (CO) against orthostatic stress in the post-flight period. The mechanisms responsible for the observed orthostatic intolerance are not yet completely understood. Additionally, effective counter measures to attenuate this pathophysiological response are not available. The aim of this study was to investigate the ability of our proposed system identification method to predict closed-loop dynamic changes in TPR induced by changes in mean arterial pressure (MAP) and right atrial pressure (RAP). For this purpose we designed and employed a novel experimental animal model for the examination of arterial and cardiopulmonary baroreceptors in the dynamic closed-loop control of total peripheral resistance (TPR), and applied system identification to the analysis of beat-to-beat fluctuations in the measured signals. Grant numbers: NAG5-4989. c 2001. Elsevier Science Ltd. All rights reserved.

  3. An assessment of overall open-loop "gain" of CO2-ventilation feedback control system in hypoxia.

    Science.gov (United States)

    Masuyama, H; Akiyama, S; Honda, Y

    1985-01-01

    Overall open-loop gain of the CO2-ventilation feedback control system in hypoxia (GHCO2) was determined on 8 male and one female healthy subjects. They breathed in a closed circuit, and were subjected to the progressive hypoxia test. This procedure was first conducted without dead space (DS), then with 250, 500, and finally 750 ml DS, consecutively. GHCO2 was calculated by dividing the slope of the CO2 response curve (S) by that of the metabolic hyperbola (SL). GHCO2 was considerably larger than the overall open-loop gain of the O2-ventilation feedback control system (GO2) previously obtained. This was ascribed to the facts that S was larger than the slope of the hypoxia response curve, and that the absolute value of SL in GHCO2 was smaller than that in GO2.

  4. Modeling and Compensation Design for a Power Hardware-in-the-Loop Simulation of an AC Distribution System

    Energy Technology Data Exchange (ETDEWEB)

    Ainsworth, Nathan; Hariri, Ali; Prabakar, Kumaraguru; Pratt, Annabelle; Baggu, Murali

    2016-11-21

    Power hardware-in-the-loop (PHIL) simulation, where actual hardware under text is coupled with a real-time digital model in closed loop, is a powerful tool for analyzing new methods of control for emerging distributed power systems. However, without careful design and compensation of the interface between the simulated and actual systems, PHIL simulations may exhibit instability and modeling inaccuracies. This paper addresses issues that arise in the PHIL simulation of a hardware battery inverter interfaced with a simulated distribution feeder. Both the stability and accuracy issues are modeled and characterized, and a methodology for design of PHIL interface compensation to ensure stability and accuracy is presented. The stability and accuracy of the resulting compensated PHIL simulation is then shown by experiment.

  5. Clinical Voices - an update

    DEFF Research Database (Denmark)

    Fusaroli, Riccardo; Weed, Ethan

    Anomalous aspects of speech and voice, including pitch, fluency, and voice quality, are reported to characterise many mental disorders. However, it has proven difficult to quantify and explain this oddness of speech by employing traditional statistical methods. In this talk we will show how the t...... the temporal dynamics of the voice in Asperger's patients enable us to automatically reconstruct the diagnosis, and assess the Autism quotient score. We then generalise the findings to Danish and American children with autism....

  6. Adaptive Correlation Space Adjusted Open-Loop Tracking Approach for Vehicle Positioning with Global Navigation Satellite System in Urban Areas

    Directory of Open Access Journals (Sweden)

    Hang Ruan

    2015-08-01

    Full Text Available For vehicle positioning with Global Navigation Satellite System (GNSS in urban areas, open-loop tracking shows better performance because of its high sensitivity and superior robustness against multipath. However, no previous study has focused on the effects of the code search grid size on the code phase measurement accuracy of open-loop tracking. Traditional open-loop tracking methods are performed by the batch correlators with fixed correlation space. The code search grid size, which is the correlation space, is a constant empirical value and the code phase measuring accuracy will be largely degraded due to the improper grid size, especially when the signal carrier-to-noise density ratio (C/N0 varies. In this study, the Adaptive Correlation Space Adjusted Open-Loop Tracking Approach (ACSA-OLTA is proposed to improve the code phase measurement dependent pseudo range accuracy. In ACSA-OLTA, the correlation space is adjusted according to the signal C/N0. The novel Equivalent Weighted Pseudo Range Error (EWPRE is raised to obtain the optimal code search grid sizes for different C/N0. The code phase measuring errors of different measurement calculation methods are analyzed for the first time. The measurement calculation strategy of ACSA-OLTA is derived from the analysis to further improve the accuracy but reduce the correlator consumption. Performance simulation and real tests confirm that the pseudo range and positioning accuracy of ASCA-OLTA are better than the traditional open-loop tracking methods in the usual scenarios of urban area.

  7. Effects of Medications on Voice

    Science.gov (United States)

    ... ENT Doctor Near You Effects of Medications on Voice Effects of Medications on Voice Patient Health Information ... entnet.org . Could Your Medication Be Affecting Your Voice? Some medications including prescription, over-the-counter, and ...

  8. Clinical governance in practice: closing the loop with integrated audit systems.

    Science.gov (United States)

    Taylor, L; Jones, S

    2006-04-01

    -making processes and care delivery as a result of the audit. Brief clinical examples are given. In conclusion, the impact of the audit on unit strategy and organizational efficiency are discussed to highlight the importance of closing the audit loop and completing the cycle of clinical governance. The audit system has positive implications for replication in other services.

  9. A closed-loop biorefining system to convert organic residues into fuels

    Science.gov (United States)

    Chen, Rui

    This project delivers an energy positive and water neutral, closed-loop biorefining system that converts organic wastes into renewable energy and reduces the overall impacts on the environment. The research consisted of three major stages: The first stage of this project was conducted in an anaerobic co-digestion system. Effects of the ratio of dairy manure-to-food waste as well as operating temperature were tested on the performance of the co-digestion system. Results illustrated an increase in biogas productivity with the increase of supplemental food waste; fiber analysis revealed similar chemical composition (cellulose, hemicellulose and lignin) of final solid digestate regardless their different initial feedstock blends and digestion conditions. The molecular genetic analyses demonstrated that anaerobic methanogenic microorganisms were able to adjust their community assemblage to maximize biogas production and produce homogenized solid digestate. The second stage utilized electrocoagulation (EC) pretreated liquid digestate from previous stage to culture freshwater algae. Kinetics study showed a similar maximum growth rate (0.201-0.207 g TS day-1) in both 2x and 5x dilutions of EC solution; however, the algal growth was inhibited in original EC solution (1x), possibly due to the high ammonia-to-phosphate ratio. Algal community assemblage changed drastically in different dilutions of EC solution after a 9-day culture. The following semi-continuous culture in 2x and 5x EC media established steady biomass productivities and nitrogen removal rates; in addition, both conditions illustrated a phenomenon of phosphorus luxury uptake. Biomass composition analyses showed that algae cultured in medium containing higher nitrogen (2x EC medium) accumulated more protein but less carbohydrate and lipid than the 5x EC medium. The last stage involved hydrolyzing the algal biomass cultured in anaerobic digestion effluent and analyzing the effects of the neutralized algal

  10. Inhibition of a type III secretion system by the deletion of a short loop in one of its membrane proteins

    Energy Technology Data Exchange (ETDEWEB)

    Meshcheryakov, Vladimir A. [Okinawa Instiute of Science and Technology, Okinawa 904-0495 (Japan); Kitao, Akio [University of Tokyo, Tokyo 113-0032 (Japan); Core Research for Evolutionary Science and Technology, Tokyo 113-0032 (Japan); Matsunami, Hideyuki; Samatey, Fadel A., E-mail: f.a.samatey@oist.jp [Okinawa Instiute of Science and Technology, Okinawa 904-0495 (Japan)

    2013-05-01

    Crystal structures of the cytoplasmic domain of FlhB from S. typhimurium and A. aeolicus were solved at 2.45 and 2.55 Å resolution, respectively. The deletion of a short loop in the cytoplasmic domain of Salmonella FlhB completely abolishes secretion by the type III secretion system. A molecular-dynamics simulation shows that the deletion of the loop affects the flexibility of a linker between the transmembrane and cytoplasmic domains of FlhB. The membrane protein FlhB is a highly conserved component of the flagellar secretion system. It is composed of an N-terminal transmembrane domain and a C-terminal cytoplasmic domain (FlhB{sub C}). Here, the crystal structures of FlhB{sub C} from Salmonella typhimurium and Aquifex aeolicus are described at 2.45 and 2.55 Å resolution, respectively. These flagellar FlhB{sub C} structures are similar to those of paralogues from the needle type III secretion system, with the major difference being in a linker that connects the transmembrane and cytoplasmic domains of FlhB. It was found that deletion of a short flexible loop in a globular part of Salmonella FlhB{sub C} leads to complete inhibition of secretion by the flagellar secretion system. Molecular-dynamics calculations demonstrate that the linker region is the most flexible part of FlhB{sub C} and that the deletion of the loop reduces this flexibility. These results are in good agreement with previous studies showing the importance of the linker in the function of FlhB and provide new insight into the relationship between the different parts of the FlhB{sub C} molecule.

  11. The RADAR Test Methodology: Evaluating a Multi-Task Machine Learning System with Humans in the Loop

    Science.gov (United States)

    2006-10-01

    Learning System with Humans in the Loop 7 subject in the form of static web pages easily accessible from the subject’s home page (Figure 2, top and...middle). Other static web content included a conference planning manual (complete with documentation of standard task constraints), a PDF of the...that I can make arrangements! Thanks, you’re the best! Kim Figure 2. Static web and vendor portal examples The RADAR Test Methodology

  12. LEOcom: communication system for low earth orbit satellites for voice, data and facsimile; LEOcom - sistema de comunicacao por satelites de orbita terrestre baixa para voz, dados e facsimile

    Energy Technology Data Exchange (ETDEWEB)

    Giacaglia, G.E.O.; Lamas, W.Q. [Universidade de Taubate (UNITAU), SP (Brazil). Programa de Pos-graduacao em Engenharia Mecanica], E-mail: giorgio@unitau.br; Ceballos, D.C. [Instituto Nacional de Pesquisas Espaciais (INPE), Sao Jose dos Campos, SP (Brazil); Pereira, J.J. [Comando-Geral de Tecnologia Aeroespacial (CTA), Sao Jose dos Campos, SP (Brazil)

    2009-07-01

    This paper provides a basic description of a Communication System for Low Earth Orbit Satellites that can provide voice, data and facsimile to hundreds of countries located in equatorial land between + and - 20 deg latitude, reaching higher latitudes, depending on the location of the onshore terminal. As a point high, it emphasizes its opportunity to support the control of networks transmission of electricity, in any area, and plants generation, located in remote areas, and support any type of operation in these regions. It is the aim of this work to reactivate a good project for Brazil and the tropical world.

  13. Consumption of Cisatracurium in different age groups, using a closed loop computer controlled system.

    Science.gov (United States)

    Joomye, Shehzaad; Yan, Donglai; Wang, Haiyun; Zhou, Guoqiang; Wang, Guolin

    2014-01-01

    We devised this study to quantify the effect of age on the consumption of cisatracurium under general anaesthesia, using a computer controlled closed loop infusion system. We further investigated this effect on, sufentanil and propofol consumption. 74 patients of physical status I and II, requiring general anaesthesia for elective abdominal surgery, were assigned to three groups. Patients in group 1 were aged from 20 to 45, group 2 were from 46 to 64, and group 3 above 65 years old. General Anesthesia was maintained with propofol and muscle paralysis was maintained using a closed-loop computer controlled infusion of cisatracurium. For analgesia, intermittent bolus of sufentanil 10 μg was given. Cisatracurium consumption in group 1, 2 and 3 were 1.8 ± 0.3, 1.6 ± 0.4 and 1.3 ± 0.4 μg/kg/min respectively. There was significant difference of cisatracurium consumption between group 1 and 3 (P = 0.002), and the consumption of cisatracurium in group 3 was less as compared with group 2 (P = 0.04). The average recovery index of patients in group 1, 2 and 3 were 8.8 ± 2.6, 11.5 ± 2.9 and 12.7 ± 2.5 minutes respectively. There were difference between group 1 and 2 (P = 0.02). As compared with group 1, the recovery index was still longer in group 3 (P = 0.001). Patients in group 1, 2 and 3 consumed an average sufentanil 0.4 ± 0.1, 0.4 ± 0.1 and 0.3 ± 0.1 μg/kg/hr, respectively. There were statistical significant between group 1 and 3 (P < 0.0001), and the same trend was found between group 2 and 3 (P = 0.03). The Consumption of propofol in group 1, 2 and 3 were 5.1 ± 0.4, 4.3 ± 0.6 and 3.1 ± 0.5 mg/kg/hr. The difference in the propofol consumption was found statistically significant when comparing between any two groups. We concluded that the sensitivity of anesthetic agents increased with age. Less medication was required to achieve a desirable effect in older patients specially those

  14. Experimental investigation of the thermal hydraulics in lead bismuth eutectic-helium experimental loop of an accelerator-driven system

    Energy Technology Data Exchange (ETDEWEB)

    Xi, Wenxuan; Wang, Yong Wei; Li, Xun Feng; Huai, Xiulan; Cal, Jun [Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing (China)

    2016-10-15

    The heat transfer characteristics between liquid lead bismuth eutectic (LBE) and helium are of great significance for the two-loop cooling system based on an accelerator-driven system (ADS). This paper presents an experimental study on the resistance characteristics and heat transfer performance in a LBE-helium experimental loop of ADS. Pressure drops in the LBE loop, the main heat transfer, and the coupled heat transfer characteristics between LBE and helium are investigated experimentally. The temperature of LBE has a significant effect on the LBE thermo-physical properties, and is therefore considered in the prediction of pressure drops. The results show that the overall heat transfer coefficient increases with the increasing helium flow rate and the decreasing inlet temperature of helium. Increasing the LBE Reynolds number and LBE inlet temperature promotes the heat transfer performance of main heat transfer and thus the overall heat transfer coefficient. The experimental results give an insight into the flow and heat transfer properties in a LBE-helium heat exchanger and are helpful for the optimization of an ADS system design.

  15. Ultrafast Phase Comparator for Phase-Locked Loop-Based Optoelectronic Clock Recovery Systems

    DEFF Research Database (Denmark)

    Gomez-Agis, F.; Oxenløwe, Leif Katsuo; Kurimura, S.

    2009-01-01

    The authors report on a novel application of a chi((2)) nonlinear optical device as an ultrafast phase comparator, an essential element that allows an optoelectronic phase-locked loop to perform clock recovery of ultrahigh-speed optical time-division multiplexed (OTDM) signals. Particular interest...

  16. Integrating a web-based system with business processes in closed loop supply chains

    NARCIS (Netherlands)

    A.I. Kokkinaki; R. Dekker (Rommert); R. Lee; C.P. Pappis (Costas)

    2001-01-01

    textabstractClosed Loop Supply Chains include operations for physical collection of end-of-use products, selection based on their configuration and/or condition and decision making for reuse, remanufacturing or recycling. Uncertainty factors regarding the time, place of origin, and status of retu

  17. A closed-loop control system for stabilization of MHD events on TEXTOR

    NARCIS (Netherlands)

    Hennen, B.A.; Westerhof, E.; Oosterbeek, J. W.; Nuij, Pwjm; De Lazzari, D.; Spakman, G. W.; de M. Baar,; Steinbuch, M.

    2009-01-01

    This paper presents an integrated installation that facilitates closed-loop control of magnetohydrodynamic (MHD) events in a tokamak by means of electron cyclotron resonance heating and current drive. Model-based control of an elect ro-mechanical launcher, diagnosis and identification of mode featur

  18. A closed-loop control system for stabilization of MHD events on TEXTOR

    NARCIS (Netherlands)

    Hennen, B.A.; Westerhof, E.; Oosterbeek, J. W.; Nuij, Pwjm; De Lazzari, D.; Spakman, G. W.; de M. Baar,; Steinbuch, M.

    2009-01-01

    This paper presents an integrated installation that facilitates closed-loop control of magnetohydrodynamic (MHD) events in a tokamak by means of electron cyclotron resonance heating and current drive. Model-based control of an elect ro-mechanical launcher, diagnosis and identification of mode featur

  19. WHEEL CHAIR USING VOICE RECOGNITION

    OpenAIRE

    Manish Kumar Yadav*; Rajat Kumar; Santosh Yadav; Ravindra Prajapati; Prof. Kshirsagar

    2016-01-01

    The wide spread prevalence of lost limbs and sensing system is of major concern in present day due to wars, accident, age and health problems. This Omni-directional wheelchair was designed for the less able elderly to move more flexibly in narrow spaces, such as elevators or small aisle. The wheelchair is developed to help disabled patients by using speech recognition system to control the movement of wheelchair in different directions by using voice commands and also the simple movement of t...

  20. Investigations on the improvement of the energy output of a Closed Loop Geothermal System (CLGS)

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, Sven-Uwe

    2008-08-04

    The scope of this study are the development of an integrated simulation model for the estimation of the energy output of a deep Closed Loop Geothermal System (CLGS) and the discussion of several approaches to the enhancement of this output. Due to its closed character this kind of geothermal installation provides the opportunity of heat utilization even in dry and impermeable geological zones without any stimulation effort and the usage of external fluids. After a short introduction of the system itself and the limitations of other geothermal systems that are available, the investigations start with the description of the state-of-the-art with regard to the energy output analyses of the CLGS that have been done in the past. These are evaluated and their shortcomings are identified. The newly developed and introduced 3-dimensional approach of this study is a capable tool for the pre-feasibility phase of the project development of a CLGS. A geological/geothermal model summarizes selected relevant data and information about the project area in the form of a spatial data distribution. Thereby the formation boundaries are modelled as well as local in-homogeneities. The lithology can be modelled as well as the distribution of the thermal and physical properties of the rocks. The temperature distribution can be modelled using map or drill log data and be interpolated using geostatistical methods. After the combination of the geological/geothermal model and the technical model of the CLGS containing all relevant data with regard to the drill hole design, dimensions, casings and thermal properties of the installed materials, incl. the annuli, the thermal behaviour of the heat bearing fluid (HBF) flowing within the pipe system is simulated over time in connection with the simulation of the thermal behaviour of the surrounding rock mass. This core simulation is added by the afterwards processed scenario based energy supply simulation that calculates the amounts of energy

  1. Design of a Closed-Loop, Bidirectional Brain Machine Interface System With Energy Efficient Neural Feature Extraction and PID Control.

    Science.gov (United States)

    Liu, Xilin; Zhang, Milin; Richardson, Andrew G; Lucas, Timothy H; Van der Spiegel, Jan

    2016-12-16

    This paper presents a bidirectional brain machine interface (BMI) microsystem designed for closed-loop neuroscience research, especially experiments in freely behaving animals. The system-on-chip (SoC) consists of 16-channel neural recording front-ends, neural feature extraction units, 16-channel programmable neural stimulator back-ends, in-channel programmable closed-loop controllers, global analog-digital converters (ADC), and peripheral circuits. The proposed neural feature extraction units includes 1) an ultra low-power neural energy extraction unit enabling a 64-step natural logarithmic domain frequency tuning, and 2) a current-mode action potential (AP) detection unit with time-amplitude window discriminator. A programmable proportional-integral-derivative (PID) controller has been integrated in each channel enabling a various of closed-loop operations. The implemented ADCs include a 10-bit voltage-mode successive approximation register (SAR) ADC for the digitization of the neural feature outputs and/or local field potential (LFP) outputs, and an 8-bit current-mode SAR ADC for the digitization of the action potential outputs. The multi-mode stimulator can be programmed to perform monopolar or bipolar, symmetrical or asymmetrical charge balanced stimulation with a maximum current of 4 mA in an arbitrary channel configuration. The chip has been fabricated in 0.18 μ m CMOS technology, occupying a silicon area of 3.7 mm (2). The chip dissipates 56 μW/ch on average. General purpose low-power microcontroller with Bluetooth module are integrated in the system to provide wireless link and SoC configuration. Methods, circuit techniques and system topology proposed in this work can be used in a wide range of relevant neurophysiology research, especially closed-loop BMI experiments.

  2. Note: A dual temperature closed loop batch reactor for determining the partitioning of trace gases within CO2-water systems.

    Science.gov (United States)

    Warr, Oliver; Rochelle, Christopher A; Masters, Andrew J; Ballentine, Christopher J

    2016-01-01

    An experimental approach is presented which can be used to determine partitioning of trace gases within CO2-water systems. The key advantages of this system are (1) The system can be isolated with no external exchange, making it ideal for experiments with conservative tracers. (2) Both phases can be sampled concurrently to give an accurate composition at each phase at any given time. (3) Use of a lower temperature flow loop outside of the reactor removes contamination and facilitates sampling. (4) Rapid equilibration at given pressure/temperature conditions is significantly aided by stirring and circulating the water phase using a magnetic stirrer and high-pressure liquid chromatography pump, respectively.

  3. 集群录音系统在营销语音监控中的应用%Application of the Cluster Recording System in the Marketing Voice Monitoring System

    Institute of Scientific and Technical Information of China (English)

    滕波; 蒋钟

    2014-01-01

    通过分析分子营销语音监控的现状,设计一种基于信息网的集群录音系统,并介绍了该系统的架构和具体软硬件配置,以及它的经济和社会效益。集群录音系统实现了对营销客服电话的统一监控和管理。%By analyzing the current situation of the marketing voice monitoring,this paper presents a cluster recording system of information network based on the marketing voice monitoring system,and introduces the architecture of cluster recording system and the specific hardware and software configura-tion,and its economic and social benefits.The system can help to have a unified monitoring and manage-ment to the marketing clients’telephones.

  4. Comparison of post menopausal voice changes across professional and non-professional users of the voice

    Directory of Open Access Journals (Sweden)

    Pallavi Vishwas Sovani

    2010-12-01

    Full Text Available Menopause effects a permanent change in certain body functions, one of them being voice. Moreover, if the voice is used continuously as a part of one’s occupation, this may further impact postmenopausal voice changes. The present study investigated the impact of menopause and professional voice use, and their interaction effect, on the voice. 92 women were classified into reproductive (52 and postmenopausal (40. Each group was divided into Level II (teachers and Level IV (clerks of Koufman and Isaacson’s (1991 classification. Acoustic parameters were analyzed using the VisiPitch III software. Aerodynamic parameters were manually calculated. The VHI (Voice Handicap Index was also included to improve the face validity of the study. Results suggest that Fo, SFo and MPT reduce post menopause while NHR and VTI increase. Some changes are accelerated in teachers as compared to clerks while some are decelerated. VHI scores of teachers are significantly greater than clerks, though not significantly different across menopause. Thus the presence or absence of voice use in one’s profession differentially affects postmenopausal changes. The study has implications in improving the condition of teachers in India, developing norms for menopausal changes and modifying allowable limits for voice recognition systems in future.

  5. Telemedicine to Promote Patient Safety: Use of Phone-Based Interactive Voice-Response System to Reduce Adverse Safety Events in Pre-dialysis CKD.

    Science.gov (United States)

    Weiner, Shoshana; Fink, Jeffery C

    2017-01-01

    CKD patients have several features conferring on them a high risk of adverse safety events, which are defined as incidents with unintended harm related to processes of care or medications. These characteristics include impaired kidney function, polypharmacy, and frequent health system encounters. The consequences of such events in CKD can include new or prolonged hospitalization, accelerated kidney function loss, acute kidney injury, ESRD, and death. Health information technology administered via telemedicine presents opportunities for CKD patients to remotely communicate safety-related findings to providers for the purpose of improving their care. However, many CKD patients have limitations that hinder their use of telemedicine and access to the broad capabilities of health information technology. In this review, we summarize previous assessments of the pre-dialysis CKD populations' proficiency in using telemedicine modalities and describe the use of interactive voice-response system to gauge the safety phenotype of the CKD patient. We discuss the potential for expanded interactive voice-response system use in CKD to address the safety threats inherent to this population.

  6. Research on Network Voice Transmission System Based on RTEMS%基于RTEMS的网络语音传输系统的研究

    Institute of Scientific and Technical Information of China (English)

    李顺

    2014-01-01

    Studies the key technologies on network voice transmission, which include VoIP principles, H.323 network communication protocol and SIP. A network audio transmission system which is characterized by recording, implements playback and remote transmission function-alities based on such research results. Designs S3C2410 development board as the hardware platform and selects the RTEMS real-time operating system as the software platform since it is a lightweight, real-time and open source operating system.%主要研究网络语音传输过成中的关键技术,包括:Voice over IP(VoIP)的原理、网络通信协议H.323和会话初始化协议(SIP)。在此基础上研究并实现一个具有录音、放音、远程传输音频数据的网络音频系统。该网络音频传输系统是在以S3C2410嵌入式处理器为核心的硬件开发平台,RTEMS为软件平台的基础上进行开发,可以通过网络传送声音数据。

  7. Comparative study in LTC Combustion between a short HP EGR loop without cooler and a variable lift and duration system

    Energy Technology Data Exchange (ETDEWEB)

    Bression, Guillaume; Pacaud, Pierre; Soleri, Dominique; Cessou, Jerome [IFP (France); Azoulay, David [Renault Powertrain Div. (France); Lawrence, David [Mechadyne (United Kingdom); Doradoux, Laurent; Guerrassi, Noureddine [Delphi Diesel Systems (France)

    2008-07-01

    In order to reach future Diesel emission standards such as Euro 6 or Tier 2 Bin 5, NO{sub x} emissions need to be dramatically reduced. Advanced technologies and engine settings such as higher EGR rates, reduced compression ratio, EGR cooler and low-pressure EGR loop - depending on vehicle application - may help to reach this target whilst maintaining low CO{sub 2} emissions and fuel consumption. However, the resulting low combustion temperatures and the low air-fuel ratios lead to a significant increase in HC and CO emissions, especially during the start-up phase prior to catalyst light-off. Moreover, high levels of EGR make transient operation even more difficult. So HC-CO emissions and EGR transient operation represent two key issues that could limit the extension of this alternative combustion mode. Consequently, an in-depth investigation of a variable lift and duration (VLD) system was performed to overcome these problems on a 4-cylinder engine, which was also equipped with a dual HP-LP EGR loop. The VLD system tested in this paper produces a variable camshaft-operated exhaust valve re-opening, which is controlled by a hydraulic rotary actuator, ensuring quick and accurate regulation of the internal gas recirculation (IGR). By increasing gas temperature in the combustion chamber, this advanced technology allows us to reduce HC-CO emissions by 50% under 3 bar BMEP. Although efficient, this technology has to be compared with other solutions from a cost-to-value point of view. The aim of this paper is firstly to compare the double lift exhaust system with a short route high-performance EGR loop without cooler by quantifying their respective gains on steady state points of the NEDC cycle, then by evaluating their potential performances during transient conditions. With the short-route EGR, the potential in HC-CO emission reduction remains significant on a large scale of engine temperatures representative of engine warm up. However, the VLD system allows us to

  8. Two-stage open-loop velocity compensating method applied to multi-mass elastic transmission system

    Directory of Open Access Journals (Sweden)

    Zhang Deli

    2014-02-01

    Full Text Available In this paper, a novel vibration-suppression open-loop control method for multi-mass system is proposed, which uses two-stage velocity compensating algorithm and fuzzy I + P controller. This compensating method is based on model-based control theory in order to provide a damping effect on the system mechanical part. The mathematical model of multi-mass system is built and reduced to estimate the velocities of masses. The velocity difference between adjacent masses is calculated dynamically. A 3-mass system is regarded as the composition of two 2-mass systems in order to realize the two-stage compensating algorithm. Instead of using a typical PI controller in the velocity compensating loop, a fuzzy I + P controller is designed and its input variables are decided according to their impact on the system, which is different from the conventional fuzzy PID controller designing rules. Simulations and experimental results show that the proposed velocity compensating method is effective in suppressing vibration on a 3-mass system and it has a better performance when the designed fuzzy I + P controller is utilized in the control system.

  9. Experimental analysis of control loops with different delay times in the supply air system of a radiator test rig

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yongpan; Zhao, Tianyi [School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090 (China); Zhang, Jili; Lu, Zhen [School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian 116024 (China); Liu, Hui [Beijing Siemens Cerberus Electronics Ltd, Beijing 100085 (China)

    2011-01-15

    The test rig of low-temperature hot-water radiator is a typical multi-input multi-output (MIMO) thermal system with large time delay. Aiming at the control of the supply air temperature and the temperature of the environmental chamber in the test rig, the paper carries out the fuzzy control experiments and PI control experiments based on adjusting the electric heater in the supply air system, in which there are two control loops with various delay time. The experiments researched two types of fuzzy control methods which are the basic fuzzy control (BFC), and the self-organizing rules fuzzy control (SORFC) with zero initial control rules. For the control loop of supply air temperature with short delay time, PI control performs better with fast convergence speed and small overshoot than the BFC and the SORFC. The convergence speed of the BFC method is lower than other two control methods. For the control loop of chamber temperature with long delay time, the SORFC has a satisfied control performance with less overshoot and stable error than the BFC and PI control. (author)

  10. Voice Biometrics for Information Assurance Applications

    Science.gov (United States)

    2007-11-02

    verification capability). Approach #2: The individual speaker selects a test phrase (our approach) — In the NRL voice biomet - rics system, the...templates must be issued to all users. Approach #2: Unprocessed speech waveforms (our approach) — If the fingerprint-matching biomet - rics method stores...is that the amount of data to be stored is larger compared to the previous approach. The minimum amount of information we need to perform voice biomet

  11. Voiced Reading and Rhythm

    Institute of Scientific and Technical Information of China (English)

    詹艳萍

    2007-01-01

    Since voiced reading is an important way in learning English,rhythm is the most critical factor that enables to read beautifully.This article illustrates the relationship between rhythm and voiced reading,the importance of rhythm,and the methods to develop the sense of rhythm.

  12. Clinical Voices - an update

    DEFF Research Database (Denmark)

    Fusaroli, Riccardo; Weed, Ethan

    Anomalous aspects of speech and voice, including pitch, fluency, and voice quality, are reported to characterise many mental disorders. However, it has proven difficult to quantify and explain this oddness of speech by employing traditional statistical methods. In this talk we will show how...

  13. Borderline Space for Voice

    Science.gov (United States)

    Batchelor, Denise

    2012-01-01

    Being on the borderline as a student in higher education is not always negative, to do with marginalisation, exclusion and having a voice that is vulnerable. Paradoxically, being on the edge also has positive connections with integration, inclusion and having a voice that is strong. Alternative understandings of the concept of borderline space can…

  14. Voice and endocrinology

    Directory of Open Access Journals (Sweden)

    KVS Hari Kumar

    2016-01-01

    Full Text Available Voice is one of the advanced features of natural evolution that differentiates human beings from other primates. The human voice is capable of conveying the thoughts into spoken words along with a subtle emotion to the tone. This extraordinary character of the voice in expressing multiple emotions is the gift of God to the human beings and helps in effective interpersonal communication. Voice generation involves close interaction between cerebral signals and the peripheral apparatus consisting of the larynx, vocal cords, and trachea. The human voice is susceptible to the hormonal changes throughout life right from the puberty until senescence. Thyroid, gonadal and growth hormones have tremendous impact on the structure and function of the vocal apparatus. The alteration of voice is observed even in physiological states such as puberty and menstruation. Astute clinical observers make out the changes in the voice and refer the patients for endocrine evaluation. In this review, we shall discuss the hormonal influence on the voice apparatus in normal and endocrine disorders.

  15. Face the voice

    DEFF Research Database (Denmark)

    Lønstrup, Ansa

    2014-01-01

    will be based on a reception aesthetic and phenomenological approach, the latter as presented by Don Ihde in his book Listening and Voice. Phenomenologies of Sound , and my analytical sketches will be related to theoretical statements concerning the understanding of voice and media (Cavarero, Dolar, La...

  16. Ontario's Student Voice Initiative

    Science.gov (United States)

    Courtney, Jean

    2014-01-01

    This article describes in some detail aspects of the Student Voice initiative funded and championed by Ontario's Ministry of Education since 2008. The project enables thousands of students to make their voices heard in meaningful ways and to participate in student-led research. Some students from grades 7 to 12 become members of the Student…

  17. Propulsion Powertrain Real-Time Simulation Using Hardware-in-the-Loop (HIL) for Aircraft Electric Propulsion System

    Science.gov (United States)

    Choi, Benjamin B.; Brown, Gerald V.

    2017-01-01

    It is essential to design a propulsion powertrain real-time simulator using the hardware-in-the-loop (HIL) system that emulates an electrified aircraft propulsion (EAP) systems power grid. This simulator would enable us to facilitate in-depth understanding of the system principles, to validate system model analysis and performance prediction, and to demonstrate the proof-of-concept of the EAP electrical system. This paper describes how subscale electrical machines with their controllers can mimic the power components in an EAP powertrain. In particular, three powertrain emulations are presented to mimic 1) a gas turbo-=shaft engine driving a generator, consisting of two permanent magnet (PM) motors with brushless motor drives, coupled by a shaft, 2) a motor driving a propulsive fan, and 3) a turbo-shaft engine driven fan (turbofan engine) operation. As a first step towards the demonstration, experimental dynamic characterization of the two motor drive systems, coupled by a mechanical shaft, were performed. The previously developed analytical motor models1 were then replaced with the experimental motor models to perform the real-time demonstration in the predefined flight path profiles. This technique can convert the plain motor system into a unique EAP power grid emulator that enables rapid analysis and real-time simulation performance using hardware-in-the-loop (HIL).

  18. Application of the Tool for Turbine Engine Closed-Loop Transient Analysis (TTECTrA) for Dynamic Systems Analysis

    Science.gov (United States)

    Csank, Jeffrey T.; Zinnecker, Alicia M.

    2014-01-01

    The aircraft engine design process seeks to achieve the best overall system-level performance, weight, and cost for a given engine design. This is achieved by a complex process known as systems analysis, where steady-state simulations are used to identify trade-offs that should be balanced to optimize the system. The steady-state simulations and data on which systems analysis relies may not adequately capture the true performance trade-offs that exist during transient operation. Dynamic Systems Analysis provides the capability for assessing these trade-offs at an earlier stage of the engine design process. The concept of dynamic systems analysis and the type of information available from this analysis are presented in this paper. To provide this capability, the Tool for Turbine Engine Closed-loop Transient Analysis (TTECTrA) was developed. This tool aids a user in the design of a power management controller to regulate thrust, and a transient limiter to protect the engine model from surge at a single flight condition (defined by an altitude and Mach number). Results from simulation of the closed-loop system may be used to estimate the dynamic performance of the model. This enables evaluation of the trade-off between performance and operability, or safety, in the engine, which could not be done with steady-state data alone. A design study is presented to compare the dynamic performance of two different engine models integrated with the TTECTrA software.

  19. Development of Closed-Loop Simulation Methods for a Next-Generation Terminal Area Automation System

    Science.gov (United States)

    Robinson, John E., III; Isaacson, Douglas R.

    2002-01-01

    A next-generation air traffic decision support tool, known as the Active Final Approach Spacing Tool (aFAST), will generate heading, speed and altitude commands to achieve more precise separation of aircraft in the terminal area. The techniques used to analyze the performance of earlier generation decision support tools are not adequate to analyze the performance of aFAST. This paper summarizes the development of a new and innovative fully closed-loop testing method for aFAST. This method, called trajectory feedback testing, closes each aircraft's control loop inside of the aFAST scheduling algorithm. Validation of trajectory feedback testing by examination of the variation of aircraft time-of-arrival predictions between schedule updates and the variation of aircraft excess separation distances between simulation runs is presented.

  20. Simulation of the Open-loop and Closed-loop Control System Based on AMESim%基于AMESim压力开环与闭环控制系统研究

    Institute of Scientific and Technical Information of China (English)

    李新觉; 刘志刚; 余纯

    2014-01-01

    Based on the laboratory bench work of existing hydraulic schematics, AMESim models of the open-loop pressure control system and closed-loop pressure control system are established, then the results of simulation are an-alyzed in this paper. It's found that the closed-loop control system can be more stable than the open-loop control sys-tem. And it's proved that simulation results are effective by two comparative experiments.%基于实验室现有液压实验台工作原理图,通过分别建立压力开环控制和压力闭环控制系统的AMESim模型,以及所进行的仿真和分析,得出了闭环控制的系统能比开环控制的系统得到稳定精确的加载压力的结论。通过两种系统的控制对比实验,验证了仿真的结论。

  1. Utilization of a hardware-in-the-loop-system for controlling the speed of an eddy current brake

    Science.gov (United States)

    Kramer, V.; Mishra, R.; Brauneis, P.; Schmidt, K.

    2012-05-01

    Rapid prototyping with a hardware-in-the-loop (HiL) system significantly reduces the development time for controller-type testing and is widely used in various fields of engineering. In this discussion, a controller is developed for a speed control application utilizing a magnetic brake. A mathematical model is presented first that has been implemented in Matlab/ Simulink. The controller development steps are described that will form the basis of a control system for a wind turbine. A test is carried out that simulates the wind turbine inertial load.

  2. Time dependence of hysteresis loop displacement in hard-soft magnetic systems

    Energy Technology Data Exchange (ETDEWEB)

    Rivas, Montserrat [Departamento de Fisica de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain)]. E-mail: rivas@uniovi.es; Garcia, Jose A. [Departamento de Fisica de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Angeles Cerdeira, M. [Departamento de Fisica de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Fal-Miyar, Vanessa [Departamento de Fisica de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Tejedor, Marcos [Departamento de Fisica de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain)

    2006-09-15

    Time dependence of the hysteresis loop asymmetry observed in partially crystallized Co{sub 66}Si{sub 16}B{sub 12}Fe{sub 4}Mo{sub 2}is here analyzed at room temperature. The results are related to a magnetic aftereffect occurring in the hard crystallites embedded in the residual soft matrix. The coercive field is found to be constant with time, which is explained in terms of the dipolar interaction theory.

  3. A Development of a System Enables Character Input and PC Operation via Voice for a Physically Disabled Person with a Speech Impediment

    Science.gov (United States)

    Tanioka, Toshimasa; Egashira, Hiroyuki; Takata, Mayumi; Okazaki, Yasuhisa; Watanabe, Kenzi; Kondo, Hiroki

    We have designed and implemented a PC operation support system for a physically disabled person with a speech impediment via voice. Voice operation is an effective method for a physically disabled person with involuntary movement of the limbs and the head. We have applied a commercial speech recognition engine to develop our system for practical purposes. Adoption of a commercial engine reduces development cost and will contribute to make our system useful to another speech impediment people. We have customized commercial speech recognition engine so that it can recognize the utterance of a person with a speech impediment. We have restricted the words that the recognition engine recognizes and separated a target words from similar words in pronunciation to avoid misrecognition. Huge number of words registered in commercial speech recognition engines cause frequent misrecognition for speech impediments' utterance, because their utterance is not clear and unstable. We have solved this problem by narrowing the choice of input down in a small number and also by registering their ambiguous pronunciations in addition to the original ones. To realize all character inputs and all PC operation with a small number of words, we have designed multiple input modes with categorized dictionaries and have introduced two-step input in each mode except numeral input to enable correct operation with small number of words. The system we have developed is in practical level. The first author of this paper is physically disabled with a speech impediment. He has been able not only character input into PC but also to operate Windows system smoothly by using this system. He uses this system in his daily life. This paper is written by him with this system. At present, the speech recognition is customized to him. It is, however, possible to customize for other users by changing words and registering new pronunciation according to each user's utterance.

  4. Reverse Revenue Sharing Contract versus Two-Part Tariff Contract under a Closed-Loop Supply Chain System

    Directory of Open Access Journals (Sweden)

    Zunya Shi

    2016-01-01

    Full Text Available The importance of remanufacturing has been recognized in research and practice. The integrated system, combining the forward and reverse activities of supply chains, is called closed-loop supply chain (CLSC system. By coordination in the CLSC system, players will get economic improvement. This paper studies different coordination performances of two types of contracts, two-part tariff (TTC and reverse revenue sharing contract (RRSC, in a closed-loop system. Through mathematical analysis based on Stackelberg Game Theory, we find that it is easy for manufacturer to improve more profits and retailer’s collection effects by adjusting the ratio of transfer collection price through RRSC, and we also give the function to calculate the best ratio of transfer collection price, which may be a valuable reference for the decision maker in practice. Besides, our results also suggest that although the profits of the coordinated CLSC system are always higher than the contradictory scenario, the RRSC is more favorable to the manufacturer than to the retailer, as results show that the manufacturer will share more profits from the system through RRSC. Therefore, RRSC has attracted the manufacturers more to closing the supply chain for economic consideration.

  5. Simulation of Open Loop and Closed Loop Control of Hydraulic Thrust System of Shield Machine%盾构推进液压系统的开环与闭环仿真控制

    Institute of Scientific and Technical Information of China (English)

    徐尤南; 邓文强

    2014-01-01

    In this paper ,the hydraulic cylinder of shield thrust system is controlled by partition ,to reduce the complexity of the system and ensure the accuracy of control . The simulation analysis on the thrust hydraulic system is carried out by hydraulic simulation software AMESim ,which is controlled by open loop and closed loop respectively .The results show that :compared with open loop control , the pressure-flow closed loop control can effectively reduce the pressure and flow fluctuations , control the pressure and velocity in real time ,the control effect is better .%对盾构推进系统的液压缸采用分区控制,以达到降低系统复杂程度、保证控制精度的目的。用液压仿真软件AM ESim对推进液压系统进行仿真模拟分析,采用开环与闭环两种方式。仿真结果表明,压力流量闭环控制较开环控制可以有效减少压力和流量的波动,实时控制推进压力和推进速度,控制效果较好。

  6. Current topics in glycemic control by wearable artificial pancreas or bedside artificial pancreas with closed-loop system.

    Science.gov (United States)

    Hanazaki, Kazuhiro; Munekage, Masaya; Kitagawa, Hiroyuki; Yatabe, Tomoaki; Munekage, Eri; Shiga, Mai; Maeda, Hiromichi; Namikawa, Tsutomu

    2016-09-01

    The incidence of diabetes is increasing at an unprecedented pace and has become a serious health concern worldwide during the last two decades. Despite this, adequate glycemic control using an artificial pancreas has not been established, although the 21st century has seen rapid developments in this area. Herein, we review current topics in glycemic control for both the wearable artificial pancreas for type 1 and type 2 diabetic patients and the bedside artificial pancreas for surgical diabetic patients. In type 1 diabetic patients, nocturnal hypoglycemia associated with insulin therapy remains a serious problem that could be addressed by the recent development of a wearable artificial pancreas. This smart phone-like device, comprising a real-time, continuous glucose monitoring system and insulin pump system, could potentially significantly reduce nocturnal hypoglycemia compared with conventional glycemic control. Of particular interest in this space are the recent inventions of a low-glucose suspend feature in the portable systems that automatically stops insulin delivery 2 h following a glucose sensor value artificial pancreas with the closed-loop system has also proved safe and effective for not only avoiding hypoglycemia, but also for reducing blood glucose level variability resulting in good surgical outcomes. We hope that a more sophisticated artificial pancreas with closed-loop system will now be taken up for routine use worldwide, providing enormous relief for patients suffering from uncontrolled hyperglycemia, hypoglycemia, and/or variability in blood glucose concentrations.

  7. A closed-loop forward osmosis-nanofiltration hybrid system: Understanding process implications through full-scale simulation

    KAUST Repository

    Phuntsho, Sherub

    2016-12-30

    This study presents simulation of a closed-loop forward osmosis (FO)-nanofiltration (NF) hybrid system using fertiliser draw solution (DS) based on thermodynamic mass balance in a full-scale system neglecting the non-idealities such as finite membrane area that may exist in a real process. The simulation shows that the DS input parameters such as initial concentrations and its flow rates cannot be arbitrarily selected for a plant with defined volume output. For a fixed FO-NF plant capacity and feed concentration, the required initial DS flow rate varies inversely with the initial DS concentration or vice-versa. The net DS mass flow rate, a parameter constant for a fixed plant capacity but that increases linearly with the plant capacity and feed concentration, is the most important operational parameter of a closed-loop system. Increasing either of them or both increases the mass flow rate to the system directly affecting the final concentration of the diluted DS with direct energy implications to the NF process. Besides, the initial DS concentration and flow rates are also limited by the optimum recovery rates at which NF process can be operated which otherwise also have direct implications to the NF energy. This simulation also presents quantitative analysis of the reverse diffusion of fertiliser nutrients towards feed brine and the gradual accumulation of feed solutes within the closed system.

  8. Loop system for creating jet fuel vapor standards used in the calibration of infrared spectrophotometers and gas chromatographs.

    Science.gov (United States)

    Reboulet, James; Cunningham, Robert; Gunasekar, Palur G; Chapman, Gail D; Stevens, Sean C

    2009-02-01

    A whole body inhalation study of mixed jet fuel vapor and its aerosol necessitated the development of a method for preparing vapor only standards from the neat fuel. Jet fuel is a complex mixture of components which partitions between aerosol and vapor when aspirated based on relative volatility of the individual compounds. A method was desired which could separate the vapor portion from the aerosol component to prepare standards for the calibration of infrared spectrophotometers and a head space gas chromatography system. A re-circulating loop system was developed which provided vapor only standards whose composition matched those seen in an exposure system. Comparisons of nominal concentrations in the exposure system to those determined by infrared spectrophotometry were in 92-95% agreement. Comparison of jet fuel vapor concentrations determined by infrared spectrophotometry compared to head space gas chromatography yielded a 93% overall agreement in trial runs. These levels of agreement show the loop system to be a viable method for creating jet fuel vapor standards for calibrating instruments.

  9. Voice Savers for Music Teachers

    Science.gov (United States)

    Cookman, Starr

    2012-01-01

    Music teachers are in a class all their own when it comes to voice use. These elite vocal athletes require stamina, strength, and flexibility from their voices day in, day out for hours at a time. Voice rehabilitation clinics and research show that music education ranks high among the professionals most commonly affected by voice problems.…

  10. Neural mechanisms for voice recognition

    NARCIS (Netherlands)

    Andics, A.V.; McQueen, J.M.; Petersson, K.M.; Gal, V.; Rudas, G.; Vidnyanszky, Z.

    2010-01-01

    We investigated neural mechanisms that support voice recognition in a training paradigm with fMRI. The same listeners were trained on different weeks to categorize the mid-regions of voice-morph continua as an individual's voice. Stimuli implicitly defined a voice-acoustics space, and training expli

  11. Closed-loop spontaneous baroreflex transfer function is inappropriate for system identification of neural arc but partly accurate for peripheral arc: predictability analysis.

    Science.gov (United States)

    Kamiya, Atsunori; Kawada, Toru; Shimizu, Shuji; Sugimachi, Masaru

    2011-04-01

    Although the dynamic characteristics of the baroreflex system have been described by baroreflex transfer functions obtained from open-loop analysis, the predictability of time-series output dynamics from input signals, which should confirm the accuracy of system identification, remains to be elucidated. Moreover, despite theoretical concerns over closed-loop system identification, the accuracy and the predictability of the closed-loop spontaneous baroreflex transfer function have not been evaluated compared with the open-loop transfer function. Using urethane and α-chloralose anaesthetized, vagotomized and aortic-denervated rabbits (n = 10), we identified open-loop baroreflex transfer functions by recording renal sympathetic nerve activity (SNA) while varying the vascularly isolated intracarotid sinus pressure (CSP) according to a binary random (white-noise) sequence (operating pressure ± 20 mmHg), and using a simplified equation to calculate closed-loop-spontaneous baroreflex transfer function while matching CSP with systemic arterial pressure (AP). Our results showed that the open-loop baroreflex transfer functions for the neural and peripheral arcs predicted the time-series SNA and AP outputs from measured CSP and SNA inputs, with r2 of 0.8 ± 0.1 and 0.8 ± 0.1, respectively. In contrast, the closed-loop-spontaneous baroreflex transfer function for the neural arc was markedly different from the open-loop transfer function (enhanced gain increase and a phase lead), and did not predict the time-series SNA dynamics (r2; 0.1 ± 0.1). However, the closed-loop-spontaneous baroreflex transfer function of the peripheral arc partially matched the open-loop transfer function in gain and phase functions, and had limited but reasonable predictability of the time-series AP dynamics (r2, 0.7 ± 0.1). A numerical simulation suggested that a noise predominantly in the neural arc under resting conditions might be a possible mechanism responsible for our findings. Furthermore

  12. An adaptive and generalizable closed-loop system for control of medically induced coma and other states of anesthesia

    Science.gov (United States)

    Yang, Yuxiao; Shanechi, Maryam M.

    2016-12-01

    Objective. Design of closed-loop anesthetic delivery (CLAD) systems is an important topic, particularly for medically induced coma, which needs to be maintained for long periods. Current CLADs for medically induced coma require a separate offline experiment for model parameter estimation, which causes interruption in treatment and is difficult to perform. Also, CLADs may exhibit bias due to inherent time-variation and non-stationarity, and may have large infusion rate variations at steady state. Finally, current CLADs lack theoretical performance guarantees. We develop the first adaptive CLAD for medically induced coma, which addresses these limitations. Further, we extend our adaptive system to be generalizable to other states of anesthesia. Approach. We designed general parametric pharmacodynamic, pharmacokinetic and neural observation models with associated guidelines, and derived a novel adaptive controller. We further penalized large steady-state drug infusion rate variations in the controller. We derived theoretical guarantees that the adaptive system has zero steady-state bias. Using simulations that resembled real time-varying and noisy environments, we tested the closed-loop system for control of two different anesthetic states, burst suppression in medically induced coma and unconsciousness in general anesthesia. Main results. In 1200 simulations, the adaptive system achieved precise control of both anesthetic states despite non-stationarity, time-variation, noise, and no initial parameter knowledge. In both cases, the adaptive system performed close to a baseline system that knew the parameters exactly. In contrast, a non-adaptive system resulted in large steady-state bias and error. The adaptive system also resulted in significantly smaller steady-state infusion rate variations compared to prior systems. Significance. These results have significant implications for clinically viable CLAD design for a wide range of anesthetic states, with potential cost

  13. Immune signal transduction in leishmaniasis from natural to artificial systems: role of feedback loop insertion.

    Science.gov (United States)

    Mol, Milsee; Patole, Milind S; Singh, Shailza

    2014-01-01

    Modulated immune signal (CD14-TLR and TNF) in leishmaniasis can be linked to EGFR pathway involved in wound healing, through crosstalk points. This signaling network can be further linked to a synthetic gene circuit acting as a positive feedback loop to elicit a synchronized intercellular communication among the immune cells which may contribute to a better understanding of signaling dynamics in leishmaniasis. Network reconstruction with positive feedback loop, simulation (ODE 15s solver) and sensitivity analysis of CD14-TLR, TNF and EGFR was done in SimBiology (MATLAB 7.11.1). Cytoscape and adjacency matrix were used to calculate network topology. PCA was extracted by using sensitivity coefficient in MATLAB. Model reduction was done using time, flux and sensitivity score. Network has five crosstalk points: NIK, IκB-NFκB and MKK (4/7, 3/6, 1/2) which show high flux and sensitivity. PI3K in EGFR pathway shows high flux and sensitivity. PCA score was high for cytoplasmic ERK1/2, PI3K, Atk, STAT1/3 and nuclear JNK. Of the 125 parameters, 20% are crucial as deduced by model reduction. EGFR can be linked to CD14-TLR and TNF through the MAPK crosstalk points. These pathways may be controlled through Ras and Raf that lie upstream of signaling components ERK ½ (c) and JNK (n) that have a high PCA score via a synthetic gene circuit for activating cell-cell communication to elicit an inflammatory response. Also a disease resolving effect may be achieved through PI3K in the EGFR pathway. The reconstructed signaling network can be linked to a gene circuit with a positive feedback loop, for cell-cell communication resulting in synchronized response in the immune cell population, for disease resolving effect in leishmaniasis. © 2013 Elsevier B.V. All rights reserved.

  14. Neural signal processing and closed-loop control algorithm design for an implanted neural recording and stimulation system.

    Science.gov (United States)

    Hamilton, Lei; McConley, Marc; Angermueller, Kai; Goldberg, David; Corba, Massimiliano; Kim, Louis; Moran, James; Parks, Philip D; Sang Chin; Widge, Alik S; Dougherty, Darin D; Eskandar, Emad N

    2015-08-01

    A fully autonomous intracranial device is built to continually record neural activities in different parts of the brain, process these sampled signals, decode features that correlate to behaviors and neuropsychiatric states, and use these features to deliver brain stimulation in a closed-loop fashion. In this paper, we describe the sampling and stimulation aspects of such a device. We first describe the signal processing algorithms of two unsupervised spike sorting methods. Next, we describe the LFP time-frequency analysis and feature derivation from the two spike sorting methods. Spike sorting includes a novel approach to constructing a dictionary learning algorithm in a Compressed Sensing (CS) framework. We present a joint prediction scheme to determine the class of neural spikes in the dictionary learning framework; and, the second approach is a modified OSort algorithm which is implemented in a distributed system optimized for power efficiency. Furthermore, sorted spikes and time-frequency analysis of LFP signals can be used to generate derived features (including cross-frequency coupling, spike-field coupling). We then show how these derived features can be used in the design and development of novel decode and closed-loop control algorithms that are optimized to apply deep brain stimulation based on a patient's neuropsychiatric state. For the control algorithm, we define the state vector as representative of a patient's impulsivity, avoidance, inhibition, etc. Controller parameters are optimized to apply stimulation based on the state vector's current state as well as its historical values. The overall algorithm and software design for our implantable neural recording and stimulation system uses an innovative, adaptable, and reprogrammable architecture that enables advancement of the state-of-the-art in closed-loop neural control while also meeting the challenges of system power constraints and concurrent development with ongoing scientific research designed

  15. Design of Accumulators and Liquid/Gas Charging of Single Phase Mechanically Pumped Fluid Loop Heat Rejection Systems

    Science.gov (United States)

    Bhandari, Pradeep; Dudik, Brenda; Birur, Gajanana; Karlmann, Paul; Bame, David; Mastropietro, A. J.

    2012-01-01

    For single phase mechanically pumped fluid loops used for thermal control of spacecraft, a gas charged accumulator is typically used to modulate pressures within the loop. This is needed to accommodate changes in the working fluid volume due to changes in the operating temperatures as the spacecraft encounters varying thermal environments during its mission. Overall, the three key requirements on the accumulator to maintain an appropriate pressure range throughout the mission are: accommodation of the volume change of the fluid due to temperature changes, avoidance of pump cavitation and prevention of boiling in the liquid. The sizing and design of such an accumulator requires very careful and accurate accounting of temperature distribution within each element of the working fluid for the entire range of conditions expected, accurate knowledge of volume of each fluid element, assessment of corresponding pressures needed to avoid boiling in the liquid, as well as the pressures needed to avoid cavitation in the pump. The appropriate liquid and accumulator strokes required to accommodate the liquid volume change, as well as the appropriate gas volumes, require proper sizing to ensure that the correct pressure range is maintained during the mission. Additionally, a very careful assessment of the process for charging both the gas side and the liquid side of the accumulator is required to properly position the bellows and pressurize the system to a level commensurate with requirements. To achieve the accurate sizing of the accumulator and the charging of the system, sophisticated EXCEL based spreadsheets were developed to rapidly come up with an accumulator design and the corresponding charging parameters. These spreadsheets have proven to be computationally fast and accurate tools for this purpose. This paper will describe the entire process of designing and charging the system, using a case study of the Mars Science Laboratory (MSL) fluid loops, which is en route to

  16. Efficiency Analysis of the Main Components of a Vertical Closed-Loop System in a Borehole Heat Exchanger

    Directory of Open Access Journals (Sweden)

    Cristina Sáez Blázquez

    2017-02-01

    Full Text Available In vertical closed-loop systems, it is common to use single or double U-tube heat exchangers separated by longitudinal spacers. In addition, the helical-shaped pipe is another configuration that requires lower drilling lengths but it is less used. The aim of the present research is to study the influence of these components on the total efficiency of a borehole heat exchanger (BHE. Thus, the differences between using single/double U-tubes (with or without spacers and helical pipes are analysed in terms of efficiency. Through different laboratory tests, a small vertical closed-loop system was simulated in order to analyse all these possible configurations. The grouting materials and the temperatures of the ground were modified at the same time in these tests. Regarding the heat exchange process between the ground and the heat carrier fluid, it must be highlighted that the best results were obtained for the helical-shaped pipe configuration. Some of the improvements offered by this heat exchanger typology with respect to the vertical configuration is that a lower drilling depth is required even it requires a larger diameter. This leads to significant economic savings in the performing drilling process. Finally, it is also worth noting the importance of using spacers in vertical U-tubes and that no improvements have been found regarding the use of single or double configuration of U-tubes. Thanks to the laboratory results derived from this study it is possible to establish the optimum behaviour pattern for the entire vertical closed-loop systems.

  17. Juicer Provides a One-Click System for Analyzing Loop-Resolution Hi-C Experiments.

    Science.gov (United States)

    Durand, Neva C; Shamim, Muhammad S; Machol, Ido; Rao, Suhas S P; Huntley, Miriam H; Lander, Eric S; Aiden, Erez Lieberman

    2016-07-01

    Hi-C experiments explore the 3D structure of the genome, generating terabases of data to create high-resolution contact maps. Here, we introduce Juicer, an open-source tool for analyzing terabase-scale Hi-C datasets. Juicer allows users without a computational background to transform raw sequence data into normalized contact maps with one click. Juicer produces a hic file containing compressed contact matrices at many resolutions, facilitating visualization and analysis at multiple scales. Structural features, such as loops and domains, are automatically annotated. Juicer is available as open source software at http://aidenlab.org/juicer/.

  18. Exposure to the magnetic field from an induction loop pad for a hearing aid system.

    Science.gov (United States)

    Hansson Mild, Kjell; Friberg, Stefan; Frankel, Jennifer; Wilén, Jonna

    2017-03-01

    As a case study we have measured the magnetic field from an induction loop pad designed for hearing aid assistance. The magnitude of the field was high, although well below international guidelines. We recorded values up to 70% of the recommended standard in some instances. However, in view of the many reports indicating health effects of low-level exposure, we recommend that the precautionary principle is applied when such pads are given to people who might be especially vulnerable, such as children, pregnant women and women on breast cancer medication.

  19. Qos and Voice Over IP

    Directory of Open Access Journals (Sweden)

    Adrian GHENCEA

    Full Text Available As Voice over Internet Protocol (VoIP technology matures, companies are increasingly adopting it to cut costs, improve efficiency and enhance customer service. Using the Internet as an existing network for integrating data and telecom systems through intelligent VoIP, a range of benefits results: lower long distance costs, cost cuts in cabling processes and more flexible telephony management. However, as voice over IP services grow in popularity, major threats arise: this rapid growth leads to traffic congestion, security is jeopardizedand the poor quality of calls affects communication. The objective of this article is to present all the elements that can affect voicequality in a VoIP network and to provide methods for solving them. A detailed analysis to minimize the impact of implementation of QoS will be made, and at the end solutions to management strategies will be proposed.

  20. Dominant Voice in Hamlet

    Institute of Scientific and Technical Information of China (English)

    李丹

    2015-01-01

    <正>The Tragedy of Hamlet dramatizes the revenge Prince Hamlet exacts on his uncle Claudius for murdering King Hamlet,Claudius’s brother and Prince Hamlet’s father,and then succeeding to the throne and taking as his wife Gertrude,the old king’s widow and Prince Hamlet’s mother.This paper will discuss something about dominant voice in the play.Dominant voice is the major voice in the country,the society,or the whole world.Those people who have the power or