WorldWideScience

Sample records for vitrification des produits

  1. The present state of research on the vitrification of concentrated solutions of fission products (1962); Etat des etudes sur la vitrification des solutions concentrees de produits de fission (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Bonniaud, R; Sombret, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    The present report gives the actual point of studies on vitrification of concentrated solutions of fission products. An active cell, giving glasses in crucibles, permitted to study various glass compositions. The leaching rate from the glass raises 1 to 2 10{sup -7} g of glass/cm{sup 2}/day. Activity loss by volatility during vitrification remains weak and often below 0.1 per cent of total activity. Off gas cleaning is made easier by presence of filter which is compound of granules including iron oxide. After saturation the content of this filter can be melt. Moreover different processes are in experimentation for a more important production. Daily 72 liters of solution containing tracer activity are treated in a continuous calcination and vitrification plant. The loss in {sup 106}Ru is still important and a modification of installation has been necessary. A pot vitrification plant is in study. In order to reduce cost of processing the possibility to pour glass after melting is actuality in study. A production set of very active glass is also in project. (authors) [French] Le present rapport fait le point des etudes menees sur la vitrification des solutions concentrees de produits de fission. Une installation active, produisant des verres en creusets, a permis d'etudier plusieurs compositions de verres. Le taux de perte d'activite par lixiviation a l'eau atteint 1 a 2 10{sup -7} gramme de verre/cm{sup 2}/jour. Les pertes d'activite par volatilite au cours de la cuisson restent faibles et souvent inferieures a 0,1 pour cent de l'activite totale. L'epuration des gaz de cuisson est facilitee par la presence d'un filtre a granules riches en oxyde de fer, dont le contenu peut etre fondu apres saturation. Differentes techniques sont, en outre, en experimentation pour une production plus importante: Une installation de calcination et vitrification continue traite 72 litres par jour de solution contenant une activite traceur. La perte en Ru{sup 106} est encore importante

  2. Volatility of ruthenium during vitrification operations on fission products. part 1. nitric solutions distillation concentrates calcination. part 2. fixation on a steel tube. decomposition of the peroxide; Volatilite du ruthenium au cours des operations de vitrification des produits de fission. 1. partie distillation des solutions nitriques calcination des concentrats 2. partie fixation sur un tube d'acier decomposition du peroxyde

    Energy Technology Data Exchange (ETDEWEB)

    Ortins de Bettencourt, A; Jouan, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    During vitrification of fission product solutions, a high percentage of the ruthenium initially present in these solutions in the form of nitrosyl-ruthenium nitrates is volatilized with the production of the peroxide which itself is decomposed to ruthenium dioxide. The aim of this work has been to study the volatility of the ruthenium during the vitrification processes. During the distillation of the nitric solutions, we have studied in particular the influence on the volatility of the temperature , of the chemical form in which the ruthenium is introduced, of the bubbling of a gas through the solution, of the nitric concentration and of the nitrate concentration. During the calcination, we have observed the influence of the temperature, of the time, of the flow rate and of the nature of the carrier gas, as well as of the action of the ruthenium bi-oxide and the iron oxide on the volatility of the ruthenium. Part 2. This report deals with the study of the thermal decomposition of ruthenium peroxide, RuO{sub 4}, and its deposition on steel tubing. After a brief bibliographic review of the various properties of this substance, a study is made, in the first part, of its deposition on a steel tube. In order to do this, we pass a gas current containing RuO{sub 4} marked with {sup 106}Ru through a stainless steel tube subjected to a temperature gradient which decreases in the direction of the gas flow. The temperature at which RuO{sub 4} is deposited or is fixed on the tube is determined and the influence of the flow rate on this deposit is studied. In the second part, an attempt has been made to study by a static method the kinetics of the decomposition reaction of ruthenium peroxide to give the dioxide: RuO{sub 4} {yields} RuO{sub 2} + O{sub 2}. To do this, we have tried to introduce gaseous RuO{sub 4} into a container placed in an electric oven, and to follow the reaction by {gamma} counting. (author) [French] Au cours de la vitrification des solutions de produits de

  3. Volatility of ruthenium during vitrification operations on fission products. part 1. nitric solutions distillation concentrates calcination. part 2. fixation on a steel tube. decomposition of the peroxide; Volatilite du ruthenium au cours des operations de vitrification des produits de fission. 1. partie distillation des solutions nitriques calcination des concentrats 2. partie fixation sur un tube d'acier decomposition du peroxyde

    Energy Technology Data Exchange (ETDEWEB)

    Ortins de Bettencourt, A.; Jouan, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    During vitrification of fission product solutions, a high percentage of the ruthenium initially present in these solutions in the form of nitrosyl-ruthenium nitrates is volatilized with the production of the peroxide which itself is decomposed to ruthenium dioxide. The aim of this work has been to study the volatility of the ruthenium during the vitrification processes. During the distillation of the nitric solutions, we have studied in particular the influence on the volatility of the temperature , of the chemical form in which the ruthenium is introduced, of the bubbling of a gas through the solution, of the nitric concentration and of the nitrate concentration. During the calcination, we have observed the influence of the temperature, of the time, of the flow rate and of the nature of the carrier gas, as well as of the action of the ruthenium bi-oxide and the iron oxide on the volatility of the ruthenium. Part 2. This report deals with the study of the thermal decomposition of ruthenium peroxide, RuO{sub 4}, and its deposition on steel tubing. After a brief bibliographic review of the various properties of this substance, a study is made, in the first part, of its deposition on a steel tube. In order to do this, we pass a gas current containing RuO{sub 4} marked with {sup 106}Ru through a stainless steel tube subjected to a temperature gradient which decreases in the direction of the gas flow. The temperature at which RuO{sub 4} is deposited or is fixed on the tube is determined and the influence of the flow rate on this deposit is studied. In the second part, an attempt has been made to study by a static method the kinetics of the decomposition reaction of ruthenium peroxide to give the dioxide: RuO{sub 4} {yields} RuO{sub 2} + O{sub 2}. To do this, we have tried to introduce gaseous RuO{sub 4} into a container placed in an electric oven, and to follow the reaction by {gamma} counting. (author) [French] Au cours de la vitrification des solutions de produits de

  4. Incidence des prix et des taxes sur la consommation de produits du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Incidence des prix et des taxes sur la consommation de produits du tabac en Argentine, en Bolivie et au Chili. Partout en Amérique du Sud, les adultes et les enfants font une grande consommation de tabac. Un nouveau projet de recherche se penchera sur les avantages et les limites des stratégies de fixation des prix et de ...

  5. Incidence des prix et des taxes sur la consommation de produits du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Incidence des prix et des taxes sur la consommation de produits du tabac en Argentine, en Bolivie et au Chili. Partout en Amérique du Sud, les adultes et les enfants font une grande ... New website will help record vital life events to improve access to services for all. A new website and resource library will help improve ...

  6. Incidence de la hausse des taxes sur le tabac et du prix des produits ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La recherche destinée aux responsables des politiques de l'Ukraine, de la Russie et du Bélarus mettra en évidence la façon dont les mesures de taxation des produits du tabac peuvent contribuer à l'atteinte d'objectifs en matière de santé ... New website will help record vital life events to improve access to services for all.

  7. Tirer le meilleur parti possible des produits de base | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    10 avr. 2014 ... Pétrole, cuivre, diamants, or et bois d'oeuvre : L'Afrique est riche en ressources naturelles et en produits de base. La production de produits de base peut favoriser une croissance rapide, mais aussi exposer les pays à une croissance en dents de scie attribuable à l'incertitude des marchés mondiaux.

  8. Incidence de la hausse des taxes sur le tabac et du prix des produits ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La recherche destinée aux responsables des politiques de l'Ukraine, de la Russie et du Bélarus mettra en évidence la façon dont les mesures de taxation des produits du tabac peuvent contribuer à l'atteinte d'objectifs en matière de santé publique et à la réduction de la charge de morbidité et de mortalité liée au tabagisme ...

  9. Élaboration d'une nouvelle politique de taxation des produits du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le moyen le plus direct et le plus efficace de réduire la consommation de tabac consiste à augmenter le prix des produits du tabac en haussant les taxes. La hausse des prix favorise l'abandon du tabac, empêche des fumeurs potentiels de commencer à fumer et réduit la consommation chez ceux qui ne cessent pas de ...

  10. Étude et mise en pratique d'un service autour des produits

    OpenAIRE

    Anthony Peguet

    2013-01-01

    Depuis une vingtaine d'années, nous assistons à une démocratisation des services dans les entreprises industrielles. De nombreux types de services autour des produits sont ainsi mis en place : installation de matériels, assistance, formations, etc. Un des objectifs principal de la mise en place de ces différents services est l'augmentation de l'attachement des clients à l'entreprise. Cette fidélité permet d'engendrer des profits directement et indirectement. Directement par l'augmentation du ...

  11. L'adoption des produits cosmétiques par les consommateurs ...

    African Journals Online (AJOL)

    Mots clés : adoption des produits cosmétiques, consommateurs, perception de la ... Keywords: adoption of cosmetics, consumers, perception of novelty, methods of ...... Bauer R (1960), Consumer Behavior as Risk Taking Dynamic Marketing for a changing ... via job mobility, Journal of economic Behaviour and Organization, ...

  12. Mesures en matière de taxation des produits du tabac en Afrique de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Mesures en matière de taxation des produits du tabac en Afrique de l'Ouest. En décembre 2007, le programme Recherche pour la lutte mondiale contre le tabac (RMCT) a entrepris une initiative afin de comprendre les facteurs cruciaux qui peuvent déterminer le succès de la lutte antitabac en Afrique subsaharienne.

  13. Des atomes d'antihydrogene produits en quantites substantielles au CERN

    CERN Multimedia

    Sevestre, G

    2002-01-01

    "Des quantites relativement substantielles d'atomes d'antihydrogene a basse temperature ont ete produites cet ete au Laboratoire europeen de physique des particules, le CERN a Geneve, ouvrant la voie a une etude approfondie de cette antimatiere qui pourrait remettre en cause les theories actuelles, a annonce mercredi sur le site Internet de la revue Nature une equipe internationale de chercheurs" (1 page).

  14. Optimisation des produits de base (Afrique subsaharienne) | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Depuis 2004, de nombreux pays de l'Afrique subsaharienne exportateurs de produits de base ont assisté à l'essor du prix de ces derniers. Si une telle hausse offre de nombreuses possibilités à un continent riche en ressources naturelles, elle n'est pas sans poser une sérieuse menace pour la gouvernance, la gestion ...

  15. Transformation et commercialisation améliorées des produits du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet vise à aborder le problème en mettant à l'essai des séchoirs solaires et en en faisant la promotion. Ces séchoirs peuvent améliorer la durée de conservation des petits poissons et la qualité du produit. Plus précisément, les chercheurs testeront des méthodes de séchage sur trois espèces de petits poissons :

  16. Commission des Nations Unies sur les produits indispensables aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Étude des soins de santé primaires dispensés dans les pays du cône Sud. Les pays membres du Réseau de recherche sur les systèmes et services de santé dans les pays du cône Sud (Red de Investigación en Sistemas y Servicios de Salud en el Cono Sur) ont des systèmes de... Voir davantageÉtude des soins de santé ...

  17. La promotion des produits alimentaires nourrissants à base de millet ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le millet possède des qualités nutritives supérieures et une plus grande résilience au climat, mais sa production et sa consommation demeurent faibles dans de nombreux pays de l'Asie du Sud, comme l'Inde. Ce projet relèvera ce défi grâce à une recherche visant la mise en valeur de la transformation du millet et des ...

  18. Caractérisation physicochimique des huiles d'olive produites dans ...

    African Journals Online (AJOL)

    SARAH

    31 mars 2015 ... trituration et de stockage des huiles d'olive influent la qualité de l'huile produite. Par conséquent, il ... Détermination de l'indice de peroxyde : 1g d'huile d'olive est ... Ensuite 60 ml d'eau distillée et 1 ml d'une solution d'empois ...

  19. Adsorption of fission products on mediterranean mud; Adsorption des produits de fission sur des vases de mediterranee

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, P; Gailledreau, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Partition coefficients of some fission products have been measured in sea water on mud taken from the bottom of the Mediterranean sea. A discussion follows on the behaviour of these radioisotopes. (author) [French] On a mesure les coefficients de partage dans l'eau de mer de quelques produits de fission a longue periode sur des echantillons de vase preleves en Mediterranee. Les valeurs trouvees sont elevees. Le comportement de ces isotopes radioactifs est discutee. (auteur)

  20. Spécification géométrique des produits (GPS) -- Indication des états de surface dans la documentation technique de produits

    CERN Document Server

    International Organization for Standardization. Geneva

    2002-01-01

    La présente Norme internationale spécifie les règles pour l'indication des états de surface dans la documentation technique de produits (par exemple dessins, spécifications, contrats, rapports) au moyen de symboles graphiques et d'indications textuelles. Elle est applicable à l'indication des exigences sur les surfaces au moyen de paramètres de profil conformément à l'ISO 4287, relatifs au profil R (paramètres de rugosité), au profil W (paramètres d'ondulation) et au profil P (paramètres de structure), de paramètres liés aux motifs conformément à l'ISO 12085, relatifs au motif de rugosité et au motif d'ondulation, et de paramètres relatifs à la courbe du taux de longueur portante conformément à l'ISO 13565-2 et à l'ISO 13565-3. NOTE Quant à l'indication des exigences concernant les imperfections de surface (pores, stries, etc.), qui ne peuvent pas être spécifiées à l'aide des paramètres d'état de surface, référence est faite à l'ISO 8785 qui couvre les imperfections de surface...

  1. Utilisation des sous-produits agroalimentaires dans l’alimentation des poissons d’élevage en Côte d’Ivoire

    Directory of Open Access Journals (Sweden)

    Kimou Nestor B.

    2016-03-01

    Full Text Available Cette étude évalue l’impact de l’utilisation des sous-produits agroalimentaires dans l’alimentation des poissons d’élevage en Côte d’Ivoire. Une enquête a été réalisée en 2013 dans quinze principales zones piscicoles sur les caractéristiques technico-économiques des fermes, le profil socio-économique des promoteurs et les pratiques aquacoles, particulièrement l’alimentation des poissons. Les résultats révèlent que 71 % des pisciculteurs enquêtés utilisent des sous-produits agricoles durant au moins un stade de production. Parmi eux, 53 % utilisent exclusivement des sous-produits. Le son de riz (52 % et le mélange de sons de riz et de maïs (28 % sont les plus utilisés. Les prix moyens de ces sous-produits varient entre 20 et 105 FCFA/kg. Oreochromis niloticus et Heterotis niloticus sont les principales espèces élevées en polyculture sur les fermes. Les sous-produits sont utilisés en système semi-intensif, extensif et en rizipisciculture, en majorité en zone rurale. Les pisciculteurs sont pour la plupart des agriculteurs, âgés de plus de 40 ans. Les taux d’utilisation des sous-produits sont plus élevés dans les régions de l’Ouest, du Centre-Ouest et du Sud-Ouest de la Côte d’Ivoire, par rapport à celles du Sud et de l’Est. Les rendements des fermes sont relativement faibles (544 à 2445 kg/ha/an, avec des gains moyens quotidiens de 0,87 et 9,97 g/j pour le tilapia et l’heterotis respectivement. L’analyse des stratégies des acteurs suggère la nécessité de définir des mécanismes d’accompagnement et de financement de la pisciculture, afin que ces acteurs puissent améliorer les formulations alimentaires à partir des matières premières locales et accessibles.

  2. From tourist product to ordinary food? De produit touristique à produit alimentaire ? Le rôle du tourisme rural dans le développement des produits locaux et du patrimoine alimentaire en Norvège.

    Directory of Open Access Journals (Sweden)

    Gunnar Vittersø

    2011-05-01

    Full Text Available Local food products, either new, “traditional”, or based on a specific conception of food heritage, play an important role in the development of the rural tourism sector in Norway. Building on different concrete Norwegian case studies, this article seeks to better understand the role tourism plays in the creation, or revival, of cultural identity based on local food products and food heritage. The paper uses the concept of the “tourist gaze” in order to analyze tourists and local consumers’ perceptions and appropriation of local food. The article highlights the consequences of the emergence of culinary and local food heritage for tourists in Norway, and concludes that tourism increases the awareness of food heritage and strengthens local identity, although these food products are not much used in ordinary food consumption.Les produits locaux, nouveaux, basés sur des recettes « traditionnelles », voire sur une conception particulière du patrimoine alimentaire, jouent un rôle important dans le développement du secteur touristique rural en Norvège. Fondé sur différents cas d’études norvégiens concrets, cet article permet de mieux comprendre le rôle joué par le tourisme dans la création, ou la construction, de l’identité culturelle basée sur le patrimoine alimentaire et le développement récent des produits locaux. Afin d’analyser la perception et l’appropriation des produits localisés par les consommateurs, nous proposons une approche fondée sur la notion de « regard touristique ». Cet article s’achève finalement sur les conséquences de l’émergence du patrimoine alimentaire local dans le tourisme, soulignant à la fois l’influence sur les pratiques alimentaires et sur la mise en valeur d’une identité culturelle locale, bien que ces produits locaux restent peu utilisés dans les habitudes alimentaires quotidiennes.

  3. Encadrement des produits et des procédés : réglementation et normalisation du commerce international

    Directory of Open Access Journals (Sweden)

    Morin Odile

    2003-07-01

    Full Text Available Produits et procédés sont encadrés à la fois par des réglementations et, à un autre niveau, par des normes du commerce international. Cette présentation traite des textes réglementaires au niveau communautaire et national. On rappellera que l’entrée en vigueur d’un règlement européen est suivie d’une transposition dans le droit de chaque pays membre et que la réglementation nationale s’applique en l’absence de dispositions communautaires. En matière de commerce international, seront évoquées les actions de normalisation du Conseil Oléicole International (COI pour les huiles d’olive et de grignons d’olive et celles du Codex Alimentarius pour les huiles et graisses comestibles. L’ensemble des dispositions réglementaires constitue un cadre englobant les productions de l’amont vers l’aval, à la fois sur un plan vertical (oléagineux, huiles et corps gras, huiles d’olive, margarines, procédés de raffinage et transversalement (composés organiques volatils, OGM, solvants d’extraction, additifs, contaminants…. Le cas de l’huile d’olive est particulier en ce qu’il bénéficie d’un encadrement au niveau international (normes commerciales COI et Codex Alimentarius, européen et national (réglementation. Le Codex Alimentarius, quant à lui, établit des normes à caractère vertical (huiles végétales, graisses animales, huiles d’olive, matières grasses tartinables… et horizontal (additifs, résidus de pesticides…. L’essentiel de cet encadrement est résumé dans les tableaux qui illustrent cette contribution.

  4. Quantitative analysis of fission products by {gamma} spectrography; Analyse quantitative des produits de fission par spectrographie {gamma}

    Energy Technology Data Exchange (ETDEWEB)

    Malet, G

    1962-07-01

    The activity of the fission products present in treated solutions of irradiated fuels is given as a function of the time of cooling and of the irradiation time. The variation of the ratio ({sup 144}Ce + {sup 144}Pr activity/{sup 137}Cs activity) as a function of these same parameters is also given. From these results a method is deduced giving the 'age' of the solution analyzed. By {gamma}-scintillation spectrography it was possible to estimate the following elements individually: {sup 141}Ce, {sup 144}Ce + {sup 144}Pr, {sup 103}Ru, {sup 106}Ru + {sup 106}Rh, {sup 137}Cs, {sup 95}Zr + {sup 95}Nb. Yield curves are given for the case of a single emitter. Of the various existing methods, that of the least squares was used for the quantitative analysis of the afore-mentioned fission products. The accuracy attained varies from 3 to 10%. (author) [French] L'activite des produits de fission presents dans les solutions de traitement de combustibles irradies est donnee en fonction du temps de refroidissement et du temps d'irradiation. On etudie de plus la variation du rapport Activite du {sup 144}Ce + {sup 144}Pr /Activite du {sup 137}Cs en fonction de ces memes parametres. De ces resultats, on deduit une methode donnant l'age de la solution analysee. La spectrographie {gamma} a scintillation a permis le dosage individuel des produits suivants: {sup 141}Ce, {sup 144}Ce + {sup 144}Pr, {sup 103}Ru, {sup 106}Ru + {sup 106}Rh, {sup 137}Cs, {sup 95}Zr + {sup 95}Nb. Des courbes de rendement sont donnees dans le cas d'un emetteur unique. Des differentes methodes existantes, la methode des moindres carres a ete employee pour l'analyse quantitative des produits de fission precites. La precision obtenue varie entre 3 et 10 pour cent. (auteur)

  5. 267 Isolement des bactéries lactiques à partir des produits laitiers ...

    African Journals Online (AJOL)

    sanae

    L'objectif de cette étude est donc l'isolement des bactéries lactiques à partir de lben et ... la souche Lb4 du genre Lactobacillus possède une forte propriété acidifiante. ..... En plus de l'agroalimentaire, Cette boisson pourra jouer un rôle très ...

  6. Indidence des prix et des taxes sur la consommation de produits du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    gramme du Centre de recherches pour le développement inter- national (CRDI), une société d'État canadienne qui appuie des travaux de recherche dans les pays en développement afin d'y favoriser la croissance et le développement depuis plus de 40 ans. CP 8500 Ottawa, ON Canada K1G 3H9. Tél. : +1 613 236 6163 ...

  7. Indidence de la hausse des taxes sur le tabac et du prix des produits ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    gramme du Centre de recherches pour le développement interna- tional (CRDI), une société d'État canadienne qui appuie des travaux de recherche dans les pays en développement afin d'y favoriser la croissance et le développement depuis plus de 40 ans. CP 8500 Ottawa ON Canada K1G 3H9. Tél. : +1 613 236 6163 ...

  8. Recent progress in fission product separation; Progres recents de la separation des produits de fission

    Energy Technology Data Exchange (ETDEWEB)

    Raggenbass, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    saturated with magnesium in order to avoid as far as possible the extraction of strontium, extraction of strontium at pH 4. (author) [French] La methode decrite a Geneve en 1958 a ete experimentee avec succes. Des ameliorations importantes ont ete apportees a ce procede: 1 - Initialement, la precipitation phosphotungstique du cesium etait suivie d'une reprise a la baryte en centrifugeuse et d'une distillation de l'ammoniac dans un concentrateur. Ensuite, l'hydroxyde de baryum etait elimine par precipitation carbonique et centrifugation. 1 - Il a ete prouve que la distillation de l'ammoniac pouvait etre remplacee par une evaporation au cours de la centrifugation, ce qui supprime le concentrateur. Il a ensuite ete possible d'effectuer la carbonatation sur le melange solide-liquide provenant de l'attaque a la baryte. 2 - Pour appliquer le precedent procede au traitement des solutions provenant des combustibles uranium-molybdene, nous avons recommande une concentration qui maintient en solution le molybdene par complexation par l'acide phosphorique. Cette complexation fournit une suspension de phosphate de zirconium et de phosphotungstate d'ammonium. Ils sont separes en repassant en milieu basique qui fait precipiter la zircone, puis en revenant en milieu acide, la suite du traitement restant le meme. 3 - Les etudes sur les proprietes d'echange des sels d'hetero-polyacides poursuivies dans plusieurs pays ont toujours rencontre l'ecueil des mauvaises qualites mecaniques de ces produits. Cette difficulte a ete surmontee en emprisonnant le phosphotungstate d'ammonium dans une matrice en phosphate de zirconium. L'echangeur obtenu possede: - des proprietes mecaniques satisfaisantes - une capacite de 0,1 milliequivalent par gramme en milieu acide nitrique concentre. II est eluable et regenerable par une solution d'un sel d'ammonium. Le schema de recuperation de ces differents produits de fission est succinctement le suivant: - extraction des terres rares par l'acide di-2-ethyl hexyl

  9. Optimisation d’un Système de Séchage Solaire des Produits Agro‐alimentaires.

    OpenAIRE

    MISSOUM, Djamel Eddine

    2016-01-01

    Le séchage est l'une des principales techniques de préservation des produits agricoles et alimentaires. L’étude théorique menée sur l’optimisation d’un séchoir solaire de type indirect fonctionnant en convection forcée. Elle consisteà développer un modèle mathématique permettant de décrire le comportement thermique et le pouvoir énergétique de ce séchoir. Ce modèle mathématique a été obtenu par application des lois de transfert de c...

  10. Etude nutritive des plats alimentaires et des produits laitiers dans la région de l'extrème-nord Cameroun

    OpenAIRE

    Ponka, Roger

    2013-01-01

    Au cours de ce stage effectué du 06 Novembre 2012 au 01 février 2013, à l’’Unité Mixte de Recherche Science et Technologie du Lait et de l’oeuf de l’INRA Agrocampus-Ouest de Rennes (France), nous avons déterminé la composition nutritionnelle des plats alimentaires et des produits laitiers de la région de l’Extrême-Nord du Cameroun. Ainsi, les teneurs en protéines, lipides, minéraux, acides aminés, vitamines ont été déterminées par les méthodes de référence. La table de composition des aliment...

  11. Contamination des produits agricoles et de la nappe phréatique par ...

    African Journals Online (AJOL)

    Au Senegal, les enquetes menees dans la zone agricole des Niayes ont revele une mauvaise gestion des pesticides de la part des producteurs peu soucieux de leur impact sur lfenvironnement et la qualite des productions. Lfanalyse chromatographique apres extraction et purification a montre la presence de residus de ...

  12. DESIGNOR: une méthode nouvelle d'aide à la conception des produits industriels

    OpenAIRE

    Choffray, Jean-Marie

    1980-01-01

    Cet article présente une méthode nouvelle, appelée DESIGNOR, d'aide à la décision marketing. Son objectif est d'accroître la créativité au cours du processus de développement d'un nouveau produit industriel et de réduire les risques d'échec commercial.

  13. Separation of fission products by the use of recoil; Separation des produits de fission par utilisation du recul

    Energy Technology Data Exchange (ETDEWEB)

    Henry, R; Beydon, J; Bardy, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    We have studied fission recoil in U{sub 3}O{sub 8} organic solvent mixtures. The organic phase chosen was first naphtalene then terphenyl. Graphite and activated carbon were also tried out as recoil media. We first verified that the fission fragments are ejected from the uranium oxide particles under our experimental conditions. The retention phenomenon observed is due to an adsorption occurring either during irradiation or during the chemical treatment. Using naphthalene or terphenyl, the individual separation of the fission products has made it possible to show the influence of the chemical nature of the recoil medium on the retention of each fission product. We put forward a hypothesis concerning this phenomenon: experiments carried out using 'scavengers', together with kinetic studies make it possible to explain the retention phenomenon and to choose the most favorable conditions for reducing this retention to a low value. The thermal recombination kinetics demonstrate the influence of the fission ion charge on the final value of the retention for a given temperature. The origins of this thermal recombination are discussed. (author) [French] On a etudie le recul de fission dans les melanges U{sub 3}0{sub 8}, phase organique. La phase organique choisie a ete le naphtalene puis le terphenyle. Le graphite et le charbon actif ont egalement ete essayes comme milieux de recul. On a d'abord determine que les fragments de fission sortent des particules d'oxyde d'uranium avec un rendement de 100 pour cent dans nos conditions experimentales. Le phenomene de retention observe est du a une adsorption ayant lieu pendant l'irradiation ou pendant le traitement chimique. Dans le naphtalene et le terphenyle, la separation individuelle des produits de fission a permis de mettre en evidence l'influence de la nature chimique du milieu de recul sur la retention de chaque produit de fission. On avance une hypothese sur ce phenomene: des experiences effectuees avec des 'scavengers

  14. L'incidence du prix et des stratégies d'emballage des produits du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Des données internationales, en provenance surtout des pays à revenu élevé, ... pour s'attaquer aux stratégies de marketing ciblant des groupes vulnérables dans ... Les conclusions d'un programme financé par le CRDI au premier plan de la ...

  15. Consommation des produits écologiques et inégalités sociales. Le cas tunisien

    Directory of Open Access Journals (Sweden)

    Ridha Abdmouleh

    2010-11-01

    Full Text Available Le public tunisien méconnaît l’existence des produits écologiques sur le marché local, mais exprime en même temps son intention d’en consommer. Cette disposition résulte de la prise de conscience des enjeux écologiques et du sentiment d’implication vis-à-vis de l’environnement et de la collectivité. Le capital financier et culturel n’est pas non plus étranger à ce désir. Les produits écologiques demeurent-ils perçus comme une sorte de luxe et un privilège réservés aux classes sociales aisées ? Finalement, en dépit de sa bonne cause, la problématique environnementaliste n’échappe pas au découpage de classes et à la reproduction des inégalités sociales, d’où la nécessité de reconsidérer les conceptions et les relations traditionnelles entre les sphères économiques et sociales et la sphère environnementale. The study demonstrates the Tunisian public’s ignorancethat ecological products exist on the local market as well as the public’s willingness to consume them. Thispreference results from a growing awareness of ecological issues as well as a perceived need to get involved vis-à-vis the environment and the community. It is also depending on the individual’s financial and cultural capitals. The question is whether ecological products remain a luxury and a privilege restricted to the affluent social class. Despite its noble cause, the environmentalist issue can escape neither from class categorization nor from the reproduction of social injustices. As a result, traditional conceptions and relations between the economic and social spaces and the environmental space need to be reconsidered.

  16. Dosage of fission products in irradiated fuel treatment effluents (radio-chemical method); Dosage des produits de fission dans les effluents du traitement des combustibles irradies (methode radiochimique)

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J [Commissariat a l' Energie Atomique, Marcoule (France). Centre d' Etudes Nucleaires

    1966-07-01

    The dosage methods presented here are applicable to relatively long-lived fission products present in the effluents resulting from irradiated fuel treatment processes (Sr - Cs - Ce - Zr - Nb - Ru - I). The methods are based on the same principle: - addition of a carrying-over agent - chemical separation over several purification stages, - determination of the chemical yield by calorimetry - counting of an aliquot liquid portion. (author) [French] Les methodes de dosage presentees concernent les produits de fission a vie relativement longue presents dans les effluents de traitement des combustibles irradies (Sr - Cs - Ce - Zr - Nb - Ru - I). Elles sont toutes basees sur le meme principe: - addition d'entraineur, - separation chimique en plusieurs stades de purification, - determination du rendement chimique par calorimetrie, - comptage d'une aliquote liquide. (auteur)

  17. Study of some continuous spectra produced by nuclear reactions with light nuclei; Etude de quelques spectres continus produits par reactions nucleaires avec des noyaux legers

    Energy Technology Data Exchange (ETDEWEB)

    Marquez, L

    1966-07-01

    The continuous spectra coming from several nuclear reactions with light nuclei were measured. The spectra can be explained by a two-step reaction mechanism; however, the reactions produced by {sup 6}Li are different. A mechanism was proposed to explain their spectra based on the following assumptions: {sup 6}Li makes a nuclear molecule with the target which subsequently breaks up in such a way that an {alpha} particle comes out with the kinetic energy that it has in the molecule. The calculated spectra and those measured are in good agreement. (author) [French] Nous avons mesure les spectres continus produits dans plusieurs reactions nucleaires avec des noyaux legers. A l'exception des spectres produits par {sup 6}Li, on a trouve qu'on pouvait expliquer ces spectres par le mecanisme des reactions en deux etapes. Nous avons propose un mecanisme pour expliquer les spectres produits par {sup 6}Li. On suppose que {sup 6}Li forme une molecule nucleaire avec la cible qui eclate ensuite de facon telle qu'une particule alpha de la molecule sort avec l'energie cinetique de son mouvement propre dans la molecule. Les spectres calcules avec ces hypotheses et les spectres mesures sont en bon accord. (auteur)

  18. Circuit court du marché des produits agricoles : pour une gestion ...

    African Journals Online (AJOL)

    pour un développement durable au Lac Alaotra. . Cirad-Inra-SupAgro,. Montpellier, FR. Available at . Penot, É., Dabat, M.-H., Rakotoarimanana, A. & Grandjean, P. 2014. L'évolution des pratiques agricoles au lac Alaotra à Madagascar. Une approche par les temporalités.

  19. État des connaissances sur le traitement thermique des produits lourds State of the Art of the Thermal Treatment of Heavy Products

    Directory of Open Access Journals (Sweden)

    Blouri B.

    2006-11-01

    Full Text Available Après rappel du traitement thermique des hydrocarbures comme un moyen de viscoréduction des charges lourdes, craquage en oléfines gazeuses, ou pyrolyse totale en gaz de synthèse, le mécanisme réactionnel de vapocraquage des produits lourds constitue la première partie de l'article. Le craquage des huiles lourdes s'effectue selon un mécanisme radicalaire, tandis que les dépôts de carbone sont formés par des réactions de cycloadditions et polycondensations à des températures moyennes et par l'intermédiaire des radicaux à haute température. L'étude expérimentale du craquage thermique du n-tétracosane, du méthyl-6 eicosane et du dodécylbenzène constitue la deuxième partie de l'article et elle met en évidence, grâce à un mécanisme réactionnel du type moléculaire, la possibilité de craquage contrôlé d'une isoparaffine ou d'un hydrocarbure aromatique lourd en hydrocarbure liquide plus léger. After reviewing the thermal treatment of hydrocarbons as a way of visbreaking heavy feedstock, cracking them into gaseous olefins, or totally pyrolyzing them into synthetic gas, the first part of this article describes the reac-tion mechanism of the steam cracking of heavy products. Heavy oils are cracked by a radical mechanism, while carbon deposits are formed by cycloaddition and polycondensation reactions at mean temperatures and by the intermediary of radicals at high temperature. An experimental investigation of the thermal cracking of n-tetracosane, 6-methyleicosane and dodecylbenzene makes up the second part of the article. A reaction mechanism of the molecular type is used to describe the possibility of the controlled cracking of an isoparaffin or of a heavy aromatic hydrocarbon into a lighter liquid hydrocarbon.

  20. La patrimonialisation des produits dits de terroir Heritage-making and the enhancement of so-called ‘terroir’ products: when rural meets urban

    Directory of Open Access Journals (Sweden)

    Claire Delfosse

    2011-05-01

    Full Text Available Aujourd’hui, le phénomène de patrimonialisation des produits agro-alimentaires concerne des campagnes rêvées à forte identité, mais aussi des espaces apparemment « sans qualité », des espaces « en creux ». La patrimonialisation des produits de terroir passe par différents processus : par le biais de fêtes, de la mise en art, de la gastronomie, ainsi que par des modes de vente comme le marché… Ces processus à l’œuvre montrent que la relation au monde rural est complexe. En effet, la patrimonialisation des produits de terroir peut aussi bien être le fait d’acteurs ruraux que d’acteurs urbains, de politiques de territoire urbaines que rurales. Les produits de terroir apparaissent comme un dénominateur commun réunissant, au moins occasionnellement, anciens, nouveaux habitants, voire habitants temporaires de territoires qui se dessinent. Ce phénomène est analysé à partir de trois exemples pris dans la région Rhône-Alpes: la fête de la fourme et des Côtes du Forez et la stratégie d’affirmation d’une petite ville, Montbrison, comme capitale d’un pays, le Forez ; Bourg-en-Bresse et sa volaille, ou comment des produits de terroir peuvent contribuer à affirmer une urbanité ; enfin, l’analyse de la création d’une marque territoriale pour affirmer l’existence d’un espace « sans nom », situé à l’ombre de métropoles et la nécessité de protéger sa ruralité face au phénomène de résidentialisation.Today, the enhancement of food heritage concerns not only rural areas with cultural identities but also areas which seem « without quality » or « hollowed out». The enhancement of local products (produits de terroir entails various processes such as festivals, art events, local gastronomy and sales outlets provided by local markets. These processes reveal just how complex the links with local places are. In fact, local product enhancement can result as much from rural activities (local

  1. Fluidite de l'huile produite par des arbres du second cycle de ...

    African Journals Online (AJOL)

    Les résultats obtenus indiquent que le matériel végétal Deli x La Mé issu du premier cycle de sélection récurrente réciproque possède un indice d'iode moyen de 55. Les indices d'iode des matériels issus du second cycle de sélection récurrente réciproque, laissent apparaître globalement une amélioration de 2 points pour ...

  2. Dépendance économique aux produits forestiers non ligneux : cas des ménages riverains des forêts de Boulon et de Koflandé, au Sud-Ouest du Burkina Faso

    DEFF Research Database (Denmark)

    Ouédraogo, M; Ouédraogo, D; Thiombiano, T

    2013-01-01

    Cette étude a pour objectif d’évaluer la dépendance économique des ménages riverains des forêts de Boulon et de Koflandé aux produits forestiers non ligneux (PFNL) et d’identifier les déterminants de cette dépendance. Des enquêtes ont été menées auprès de 583 ménages de 14 villages riverains de c...

  3. The use of recoil for the separation of uranium fission products; Utilisation du recul pour la separation des produits de fission de l'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Henry, R; Herczec, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The recoil distance of fission fragments in U{sub 3}O{sub 8} is about 8 microns. By using highly diluted suspensions of uranium oxide particles having dimension much smaller than this figure (mean diameter 0,5 micron), we were able to study the re-adsorption of fission products on uranium oxide. Separation results have been studied as a function of the nature of the irradiation medium (solid or liquid) and the separation medium, of particle size and of concentration of particles in the dispersing medium. Decay curves can be used to discriminate between {sup 239}Np and mixed fission products. Most of the {sup 239}Np is found in the U{sub 3}O{sub 8} particles. The location of fission products in solid dispersing media has been determined, fission products being found always inside the dispersing medium particles. The results obtained can be applied to the rapid separation of short-lived fission products from a uranium-free starting material. (author) [French] Le parcours de recul des fragments de fission est en moyenne de 8 microns dans l'U{sub 3}O{sub 8}. En prenant des suspensions d'oxyde d'uranium dont les particules, tres diluees, ont des dimensions nettement inferieures a cette valeur (diametre moyen 0,5 micron), on a pu etudier directement la readsorption des produits de fission sur l'oxyde d'uranium. Les resultats de separation ont ete etudies en fonction de la nature du milieu d'irradiation (solide ou liquide) et du milieu de separation, de la taille des particules d'oxyde et de leur concentration dans le milieu dispersant. Les courbes de decroissance permettent de determiner la perturbation apportee dans les mesures par le {sup 239}Np qui reste en majorite dans les grains d'U{sub 3}O{sub 8}. On a determine enfin l'emplacement des produits de fission dans le cas des melanges solides; ils se trouvent toujours a l'interieur des grains du milieu recepteur. Les resultats obtenus permettent d'envisager la separation rapide de produits de fission a periode courte a

  4. L’adoption des produits cosmétiques par les consommateurs camerounais: La forte incidence de la nouveauté perçue, de l’innovativité, de l’implication et des valeurs

    Directory of Open Access Journals (Sweden)

    Darius Djoma

    2013-12-01

    Full Text Available Cet article se propose d’améliorer la compréhension de l’influence des variables individuelles et perceptuelles, sur le processus de décision d’achat d’un produit nouveau par le consommateur, puisque ces variables n’ont pas le même comportement selon les types de consommateurs. Une enquête confirmatoire menée auprès de 1005 consommateurs de produits cosmétiques au Cameroun, montre que, le type de nouveauté (incrémentale ou radicale, son utilité perçue et certaines variables individuelles (l’innovativité, l’implication, et les valeurs, jouent un rôle déterminant sur l’adoption du nouveau produit cosmétique. Des recommandations sont formulées pour améliorer la communication sur les nouveaux produits cosmétiques

  5. Fission product determination in irradiated fuel processing waste (electrophoresis); Dosage des produits de fission dans les effluents de traitement des combustibles irradies (electrophorese)

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J M; Tret, J [Commissariat a l' Energie Atomique, Centre de Marcoule, 30 - Bagnols-sur-Ceze (France). Centre de Production de Plutonium de Marcoule. Services d' Extraction du Plutonium

    1966-07-01

    This dosage method concerns fission products present in the waste produced from the processing of cooled irradiated fuels. - Sr, Cs, Ce, Y, Ru by quantitative analysis; - Zr, Nb by qualitative analysis. It includes electrophoresis on paper strips one meter long which is then analysed between two window-less Geiger counters. For an activity of 10{sup -2} {mu}Ci of any cation in a 10 {mu}l spot, the standard error {sigma} if 3 to 4 per cent. complete analysis lasts about 5 hours. (authors) [French] Cette methode de dosage concerne les produits de fission presents dans les effluents de traitement des combustibles irradies refroidis: - Sr, Cs, Ce, Y, Ru en analyse quantitative; - Zr, Nb en analyse qualitative. Elle comporte une electrophorese sur bande de papier de un metre de longueur suivie d'un depouillement entre deux compteurs Geiger sans fenetre. Pour une activite de 10{sup -2} {mu}Ci d'un cation quelconque dans une tache de 10 {mu}l l'erreur standard {sigma} est de 3 a 4 pour cent. L'analyse complete demande environ 5 heures. (auteurs)

  6. Issues and challenges of the development of petroleum products distribution sector in Algeria; Les enjeux et les defis du developpement du secteur de la distribution des produits petroliers en Algerie

    Energy Technology Data Exchange (ETDEWEB)

    Akretche, Said

    2010-09-15

    The petroleum products distribution sector in Algeria is experiencing profound changes. The economic growth has brought an increase and a diversification of petroleum products consumption. Reforms on the opening of the sector to competition and regulations have allowed progress, especially in the promotion of clean products. Naftal invested in a transformation and modernization process to adapt to the new context and align itself with the worldwide best practices. This plan expects important investments for the promotion of clean products and the development of a ducting transport network to limit the environmental damage. [French] Le secteur de la distribution des produits petroliers en Algerie connait des mutations profondes. La croissance economique a induit une augmentation et une diversification de la consommation des produits petroliers. Les reformes portant ouverture du secteur a la concurrence et regulation ont permis des avancees notamment dans la promotion des produits propres. Naftal a engage un processus de transformation et modernisation pour s'adapter au nouveau contexte et s'aligner sur les meilleures pratiques mondiales. Ce plan prevoit d'importants investissements pour la promotion des produits propres et la realisation d'un reseau de transport par canalisation pour limiter les atteintes environnementales.

  7. Vitrification of Concentrated Solutions of Fission Products: Technological Studies; Vitrification des Solutions Concentrees de Produits de Fission: Etudes Technologiques; 041e 0421 0422 0415 041a 041b 041e 0412 042b 0412 0410 041d 0418 0415 041a 041e 041d 0426 0415 041d 0422 0420 0418 0420 041e 0412 0410 041d 041d 042b 0425 0420 0410 0421 0422 0412 041e 0420 041e 0412 041f 0420 041e 0414 0423 041a 0422 041e 0412 0414 0415 041b 0415 041d 0418 042f : 0422 0415 0425 041d 0418 0427 0415 0421 041a 041e 0415 0418 0421 0421 041b 0415 0414 041e 0412 0410 041d 0418 0415 ; Vitrificacion de Soluciones Concentradas de Productos de Fision: Estudios Tecnologicos

    Energy Technology Data Exchange (ETDEWEB)

    Bonniaud, R.; Rancon, P. [Centre d' Etudes NuclEaires, Fontenay-aux-Roses (France)

    1963-02-15

    prior mixing, glass tapping conditions. Work is in progress on an installation having an induction-heated pot of 2 m high and some 20 cm in diam. (author) [French] La vitrification en creusets presente un certain nombre d'avantages: simplicite operatoire, perte faible d'activite a la cuisson; en revanche, pour une production donnee, l'encombrement des installations est considerable et la masse a stocker reste relativement importante. Deux procedes capables d'assurer une production importante avec un faible volume d'appareillages ont ete developpes. L'un permet la vitrification en continu, l'autre est un procede de vitrification semi-continu dit 'en pot'. L'installation de vitrification en continu experimentee a une capacite de production d'environ 100 l de solution par jour. Elle est composee d'un calcinateur rotatif relie a un four de fusion continue constitue par un creuset a trop plein chauffe par un four a resistances en super-kanthal. Ce creuset a trop plein, qui etait a l'origine en silico-alumineux ordinaire' a ete remplace par un creuset en silicate de zirconium electrofondu pour resister a l'action corrosive des verres phosphates. L'installation a fonctionne par campagnes d'environ 100 heures avec une activite 'traceur' d'une dizaine de millicuries par jour. Deux problemes importants sont a noter: a) Le taux de poussieres entrainees: intensemble de barboteurs en cascade recycle les poussieres dans le calcinateur; son efficacite est de l'ordre de 90%. b) La volatilite du ruthenium qui est encore importante. L'installation de vitrification ' en pot ' est un procede intermediaire entre le procede ci-dessus et le procede en creusets. La solution active, apres addition de fritte de verre et d'argile gelifiante est coulee en continu dans un pot maintenu a 500 Degree-Sign C jusqu'aiLremplissage complet. La calcination et l'alimentation sont simultanees. Le niveau de remplissage est determine pat mesure des temperatures internes. Apres calcination de la charge totale

  8. Les représentations mentales du mode de production des produits alimentaires (France Mental representations related to food production modes

    Directory of Open Access Journals (Sweden)

    Marielle Salvador-Perignon

    2011-09-01

    Full Text Available Cette recherche se propose d’aborder le mode de production du produit alimentaire sous l’angle des représentations mentales en France. Dans le langage commun on entend souvent les termes « industriel » ou « artisanal » pour caractériser les produits alimentaires, sans que l’on sache vraiment ce que ces termes désignent. Le contexte actuel d’incertitude et de méconnaissance des systèmes de production chez les consommateurs nous permet d’émettre l’hypothèse de l’existence d’une représentation mentale du mode de production. Nous tentons de vérifier cette hypothèse par une étude qualitative à l’issue de laquelle les premières caractéristiques du produit alimentaire industriel ou artisanal sont précisées.This research approaches the food product through the mental representations concerning manufacturing processes. In the common language we often find such terms as “industrial” or “traditional” to qualify production methods and characterize food products, but do we know what these terms really mean? Uncertainties and misunderstandings regarding food production enable us to highlight the existence of consumers’ mental representations regarding manufacturing processes. Such representations have been studied by means of a qualitative study which enabled us to define the primary characteristics of industrial or traditional food products.

  9. Chemical products toxicological tests performed on lake and river fish; Essai toxicologiques de produits chimiques sur des poissons d'eau douce

    Energy Technology Data Exchange (ETDEWEB)

    Teulon, F.; Simeon, C. [Commissariat a l' Energie Atomique, Centre de Pierrelatte (France). Centre d' Etudes Nucleaires

    1966-07-01

    The volume and toxical values of industrial and urban effluents are growing higher and therefore acute or chronic pollution hazard is proportionally increased. Hence it is necessary to determine the effluent components minimum lethal dose for fish (one hour or six hours according to applicable standards). The following tests are described in this report: toxicity of some chemical products, tested individually (sodium, sulphate, sodium chloride, sodium fluoride, etc...); toxicity of some metal ions (Al{sup 3+}, Fe{sup ++}, Fe{sup 3+}, Pb{sup ++}, etc...); toxicity of certain mixed compounds for various fish species (sun perch, tench, gold fish, roach, gudgeon, bleak). The test results obtained represent local values and may be used for reference and as a general basis for other investigation and calculation of the effluents data when released. (author) [French] Le volume et la toxicite des effluents industriels et urbains deviennent de plus en plus importants, les risques de pollution aigue ou chronique croissent en proportion. Il est donc necessaire de determiner les doses minima mortelles pour le poisson (1 h ou 6 h, d'apres les conventions) des composants eventuels des effluents consideres. Les essais qui font l'objet de ce rapport sont les suivants: toxicite de quelques produits chimiques, pris separement (sulfate, chlorure, fluorure de sodium, etc...); toxicite de quelques ions metalliques: Al{sup 3+}, Fe{sup ++} et Fe{sup 3+}, Pb{sup ++}, etc...); toxicite de quelques melanges sur des especes differentes de poissons ( perche-soleil, tanche, carassin, gardon, goujon, ablette). Les chiffres obtenus representent des valeurs locales et peuvent servir de references et de base de travail pour le calcul des caracteristiques des effluents a leur rejet. (auteur)

  10. Economics of Food Irradiation; Aspects Economiques de l'Irradiation des Produits Alimentaires; Voprosy ehkonomichnosti obrabotki produktov pitaniya posredstvom oblucheniya; Aspectos Economicos de la Irradiacion de Alimentos

    Energy Technology Data Exchange (ETDEWEB)

    Rindorf, H. [A/S Radest, Herstedoester (Denmark)

    1966-11-15

    , pour un industriel, la question de savoir s'il adoptera cette technique depend principalement de considerations d'ordre economique. Au Danemark, une entreprise industrielle a maintenant juge qu'il etait rentable de construire une installation de taille industrielle a fins multiples, equipee d'une machine americaine Linac, qui permettra de traiter des produits alimentaires. Jusqu'a present, seules quelques entreprises dans le monde disposent de donnees concretes sur les prix de revient pour le traitement industriel des produits alimentaires, mais les chiffres concernant d'autres domaines peuvent donner des indications. Pour les calculs pratiques, il est utile de classer les installations selon la caracteristique principale des operations, par exemple: traitement des produits 'en vrac', des articles 'moyens', des articles ' petits', et installations a ' fins multiples'; les produits alimentaires peuvent entrer sous n'importe laquelle de ces rubriques. Le cout de l'irradiation depend des proprietes du produit, du type d'installation, des quantites annuelles et mensuelles traitees, des doses, des normes de controle, des exigences speciales pour le reemballage et autres operations de manutention, etc. Dans chaque cas particulier on ne peut obtenir de chiffres surs que par un calcul precis, mais pour une evaluation preliminaire l'industriel dispose de plusieurs gammes generales de prix et il est deja evident, en ce qui concerne diverses operations, que l'irradiation est economiquement rentable. Outre l'economie de l'installation, il serait bon que l'entrepreneur etudie certains problemes commerciaux generaux, tels que la preference du consommateur et la structure du marche pour la denree en question. Le plus souvent, le meilleur moyen a cette fin consiste a commercialiser une production pilote avant de decider d'investir de grosses sommes dans du materiel tres specialise. Pour certains produits, des essais fructueux ont deja ete faits sur le marche par des organismes de

  11. Dépendance économique aux produits forestiers non ligneux : cas des ménages riverains des forêts de Boulon et de Koflandé au Sud-Ouest du Burkina Faso

    Directory of Open Access Journals (Sweden)

    Mathieu Ouédraogo

    2013-06-01

    Full Text Available Dépendance économique aux produits forestiers non ligneux : cas des ménages riverains des forêts de Boulon et de Koflandé au Sud-Ouest du Burkina Faso Résumé Cette étude a pour objectif d’évaluer la dépendance économique des ménages riverains des forêts de Boulon et de Koflandé aux produits forestiers non ligneux (PFNL et d’identifier les déterminants de cette dépendance. Des enquêtes ont été menées auprès de 583 ménages de 14 villages riverains de ces forêts. Les résultats montrent que le revenu moyen annuel par ménage est de 846 800 F CFA avec une contribution de 60% du revenu des cultures et 12% du revenu d’élevage. Les PFNL procurent en moyenne 72 479 F CFA par ménage et par an à près de 93% des ménages enquêtés. La dépendance économique des ménages aux PFNL est estimée à 12%. Elle diminue avec le revenu, traduisant une plus grande dépendance des ménages pauvres des PFNL. Par ailleurs, les hommes sont économiquement moins dépendants des PFNL que les femmes. Les principaux déterminants de la dépendance aux PFNL sont le statut d’autochtone, la taille du ménage, la superficie forestière et la densité de population du département qui affectent positivement la dépendance aux PFNL. Dans le cadre d’une politique de réduction de la pauvreté en milieu rural, il faut prendre des mesures qui favorisent l’accès durable des ménages les plus pauvres aux ressources forestières. Mots clés : Produits forestiers non ligneux, dépendance économique, modélisation économétrique, Burkina Faso.   Economic dependence on non-timber forest products: case of households living near the Forests of Boulon and Koflande, in the south-western of Burkina Faso Abstract This study aims at assessing the household economic dependence on non-timber forest products (NTFPs in Boulon and Koflande Forest area and the main determinants of that dependence. The data have been collected with a sample of 583

  12. Isolation thermique et acoustique des bâtiments réglementation, produits, mise en oeuvre

    CERN Document Server

    Bureau Veritas

    2015-01-01

    Les impératifs d’efficacité énergétique et de confort acoustique dans les bâtiments entraînent de nouvelles réponses constructives et une évolution considérable des matériaux et procédés d’isolation. Tenant compte des derniers DTU parus, ce guide regroupe dans un même volume l’essentiel des dispositions techniques de mise en oeuvre des systèmes d’isolation thermique et phonique des bâtiments. Ainsi cet ouvrage : • apporte l’éclairage nécessaire à la compréhension des réglementations thermique et acoustique ; • définit les exigences à atteindre concernant l’isolement aux bruits aériens intérieurs et extérieurs, les niveaux de bruits de chocs et d’équipements, ainsi que le traitement acoustique des parties communes ; • détaille les techniques d’isolation des toitures étanchées et des couvertures ; • décrit l’isolation thermique des murs par l’intérieur et par l’extérieur. Ce manuel pratique est destiné aux maîtres d’ouvrage et promoteurs qui y tr...

  13. Contribution de la pyrolyse des produits lourds à la valorisation des pétroles bruts Contribution of the Pyrolysis of Heavy Products to the Upgrading of Crude Oils

    Directory of Open Access Journals (Sweden)

    Charlot J. C.

    2006-11-01

    Full Text Available Le raffineur achète des pétroles bruts, de différentes qualités et d'origines variées, et il fabrique un certain nombre de produits répondant à des spécifications de qualité pour les vendre dans des proportions correspondant aux besoins du marché. Il est nécessaire pour cela d'assurer l'équilibre général entre l'approvisionnement en brut et la demande du marché en produits finis. Les facteurs traduisant l'évolution des pétroles bruts (souci de diversification géographique et politique, désir des producteurs de traiter les bruts faciles et d'exporter les lourds, compétitivité de plus en plus grande des bruts non-conventionnels, grande disponibilité d'huiles lourdes montrent l'alourdissement progressif des approvisionnements. L'enchérissement des produits pétroliers provoque de plus en plus un allègement des besoins du marché (légère augmentation des carburants, baisse des distillats moyens, chute importante des fuels lourds. Du fait de l'alourdissement des bruts conventionnels, de la grande disponibilité des huiles lourdes et de l'allègement considérable du marché des produits finis, il devient nécessaire d'utiliser des charges de plus en plus lourdes dans les procédés de conversion. La production d'oléfines peut s'effectuer à partir d'une gamme très large de coupes pétrolières, mais lorsqu'on cherche à alourdir la charge des unités de pyrolyse, il faut se poser les questions suivantes : - quelle est la souplesse des unités existantes et à venir par rapport à la charge ? - quelle est la limite industrielle et l'alourdissement de la charge ? - quel est le rôle des impuretés sur le fonctionnement des unités ? - quels sont les problèmes technologiques posés par le traitement de ces charges ? - qu'en est-il de l'amélioration des bilans énergétiques et économiques lorsque la charge s'alourdit ? A refiner buys crude oils of different qualities and varying origins and he manufactures a certain number

  14. Experiments on the incorporation of concentrated solutions of fission products in glasses and micas; Essais d'incorporation de solutions concentrees de produits de fission dans des verres et des micas

    Energy Technology Data Exchange (ETDEWEB)

    Bonniaud, R; Cohen, P; Sombret, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    1) The plants designed for extracting the plutonium of the G1, G2, G3 reactors fuel rods will produce extremely concentrated tions of fission products. 2) Let us consider a synthetic solution of the 'G2' type: (2N NO{sub 3}H - 2,25 meq/cm{sup 3} AI{sup +++} - 5.10{sup -3} {sup 134}Cs - {sup 137}Cs tracer). We made various glasses and micas by adding and mixing the necessary adjuvants and baking (900 to 1400 deg. C) in a graphite crucible. 3) The products obtained had either the shape of a cylindrical pellet or were reduced into a fine powder. They were mixed with 300 cm{sup 3} of synthetic sea water during variable periods of time in order to study leaching of the activity. 4) Experiments were first carried on caesium because of its solubility. 5) Fabrication of micas on a large scale sets many technological problems more difficult to solve (1400 deg. C) than in the case of glasses (1000 deg. C). A comparative study on both micas and glasses showed that leaching of activity was more important in the micas. (author)Fren. [French] 1) La mise en service de l'Usine d'Extraction du Plutonium destinee en particulier au traitement des barres de combustibles de G1, G2, G3 fournira des solutions residuaires concentrees de produits de fission. 2) Partant d'une solution synthetique 'G2': (2N NO{sub 3}H - 2,25meq/cm{sup 3} AI{sup +++} - 5.10{sup -3} {sup 134}Cs - {sup 137}Cs traceur) nous avens realise differents verres et micas apres adduction et melange des adjuvants necessaires suivis de cuisson (900 a 1400 deg. C) dans un creuset de graphite. 3) Les produits obtenus ont ete, soit sous forme d'eprouvette cylindrique, soit sous forme de poudre finement broyee, mis en contact et agites avec 300 cm{sup 3} d'eau de mer synthetique, durant des temps varies pour etudier la retention de l'activite. 4) Le cesium a ete choisi pour ces essais a cause de sa solubilite. 5) La fabrication de micas a grande echelle pose des problemes technologiques plus difficiles (1400 deg. C) a

  15. Etude de l'exploitation et du marché des produits forestiers non ligneux à Kinshasa

    Directory of Open Access Journals (Sweden)

    Biloso, A.

    2006-01-01

    Full Text Available Study of Non Woody Forest Products Exploitation and Market in Kinshasa. In spite of the considerable number of ethnobotanic studies carried out in many regions of the Democratic Republic of Congo, almost no information is available on the exploitation and commerce of the wild products (non woody forest products, "produits forestiers non ligneux" – PFNL of the Congolese provinces in general and the urban province of Kinshasa in particular. Nevertheless, these products are largely used and marketed. Therefore, direct observations in situ, and socio-economic and ethnoecologic investigations (including interviews were organized in the urban province of Kinshasa to analyse various aspects of consumption of these wild products. The purpose of these investigations was to collect information regarding the use and the marketing of PFNL products by the populations living in the zones surrounding the urban area. The analysis of the various types of exploitation and use of the PFNL has shown twelve categories of PFNL use: energy, food, construction of music instruments, saw mill applications, drink, drugs, dye, packing, construction of baskets, textile fabrication, construction and ornamentation. The majority of these PFNL originate not only from the secondary forests and from forest galleries, but from shrubby savannas and the marshes as well. The exploitations and uses of the PFNL vary rather largely with the level of income, the purchasing power, the attachment with food practices and with local traditions. The various levels of semi-monthly income by owner of the PFNL are estimated for the following plants which were used as vegetables: Gnetum africanum Welw., (275.0 $; Pteridium aquilinium Hieron. (166.7 $; Dracaena camerooniana Baker. (75.5 $; Dioscorea praehensilis (Benth. (71.0 $; Psophocarpus scandens (Endl. Verdc. (58.7 $. The average income resulting from the firewood sale was estimated at 80 $ per month and per person, for a group of 25 owners

  16. Development and Testing of Xanthan Products for Eor-Applications in the North Sea Développement et essais des produits à base de xanthane pour les applications de RAH en mer du Nord

    Directory of Open Access Journals (Sweden)

    Foss P.

    2006-11-01

    Full Text Available A program for development and evaluation of xanthan for use in enhanced oil recovery projects in the North Sea has been performed. Xanthan was produced using different fermentation conditions. Rheological measurements and filterability tests have been done. Xanthan products, which readily dissolve in sea water and give high viscosity and low aggregation have been produced. The fermentation process used for this type of product was scaled up from 10 litres to 20,000 litres production volume without significant changes in polymer solution properties. Un programme de développement et d'évaluation du xanthane pour utilisation dans les projets de récupération assistée des hydrocarbures en mer du Nord a été réalisé. Le xanthane est obtenu par différents procédés de fermentation. On a effectué des mesures rhéologiques et des essais de filtrabilité. Les produits à base de xanthane se dissolvent facilement dans l'eau de mer, ils donnent une forte viscosité et une faible agrégation. Avec le procédé de fermentation utilisé pour ce type de produit, on a pu faire passer la production de 10 litres à 20000 litres sans modification notable des propriétés de la solution de polymère.

  17. Commerce des produits d’élevage et territorialisation : une mise en débat à partir de trois travaux de géographes en Afrique

    Directory of Open Access Journals (Sweden)

    Denis Gautier

    2009-03-01

    Full Text Available Le projet de recherche Icare, financé par le Cirad, a pour ambition d’analyser les liens entre la dynamique des marchés mondiaux et régionaux des produits animaux et le développement dans les territoires d’élevage. Les deux terrains d’application de ce projet sont l’Afrique de l’Ouest, en particulier le Sénégal et le Mali, et la Corne de l’Afrique.Pendant longtemps, l’élevage de ces régions a eu la réputation d’être un élevage de prestige, voire un élevage contemplatif, pratiqué par des peupl...

  18. Modelling Adsorption of Foam-Forming Surfactants Modélisation de l'adsorption des produits tensio-actifs moussants

    Directory of Open Access Journals (Sweden)

    Mannhardt K.

    2006-11-01

    Full Text Available There is considerable interest in the use of foam-forming surfactants for mobility control in gas flooding enhanced oil recovery processes. The success of any such process is strongly affected by the rate of propagation of the surfactant through the reservoir. A sound understanding of surfactant adsorption on rock surfaces at reservoir conditions is therefore essential. This paper describes a model for the evaluation of adsorption during flow of surfactant solutions through porous media. The adsorption term in the flow equation is expressed in terms of the surface excess which proves to be more generally applicable than, for example, the Langmuir adsorption isotherm. Adsorption isotherms of three types of commercially available foam-forming surfactants are determined from core flooding data at different temperatures and brine salinities. L'utilisation de produits tensio-actifs moussants pour le contrôle de mobilité dans les procédés de récupération assistée du pétrole par injection de gaz suscite actuellement un grand intérêt. Mais le succès d'un tel procédé dépend largement de la vitesse de propagation du tensioactif dans le réservoir. Il est donc indispensable d'avoir une bonne connaissance de l'adsorption du tensio-actif sur les surfaces de la roche, dans les conditions de réservoir. Cet article décrit un modèle qui permet d'évaluer l'adsorption pendant l'écoulement de solutions tensio-actives en milieu poreux. Le terme qui représente l'adsorption dans l'équation de l'écoulement est exprimé en fonction de l'excédent de surface, concept qui s'est révélé d'une application plus générale que, par exemple, l'isotherme d'adsorption de Langmuir. Les isothermes d'adsorption de trois types de tensio-actifs moussants disponibles sur le marché sont déterminées à partir de données obtenues lors d'essais de déplacement dans des carottes, à différentes températures et avec des saumures de différentes salinités.

  19. Evaluation quantitative des produits formés lors de l'évolution géochimique de la matière organique Quantitative Evaluation of Products Formed During the Geochemical Evolution of Organic Matter

    Directory of Open Access Journals (Sweden)

    Pelet R.

    2006-11-01

    Full Text Available L'évaluation quantitative des produits mobiles formés lors de l'évolution géochimique de la matière organique est nécessaire parce qu'on ne peut jamais retrouver ces produits en place dans. la roche où ils ont pris naissance. Ils ont, en effet, pu migrer durant l'histoire géologique, et de toute manière une fraction, importante et non connue, se perd lors de la prise des échantillons puis de leur conservation avant analyse. La connaissance de l'analyse d'un état E et d'un état plus évolué E' ne suffit pas pour reconstituer les quantités de produits formés. La pyrolyse type Rock-Eval sur kérogènes, avec détermination du carbone résiduel, permet par contre, à partir d'une hypothèse raisonnable, de calculer les hydrocarbures produits. L'analyse élémentaire permet d'y ajouter CO2, H2O, H2S et N2 (considérés comme seuls produits à côté des hydrocarbures. Une analyse chromatographique sommaire supplémentaire permet d'estimer la composition globale des hydrocarbures. Dans le cas des roches, on propose des techniques de correction de l'effet de matrice pratiquement utilisables et qui permettent de retrouver les résultats précédents, au prix d'une incertitude accrue. The mobile products formed during the geochemical evolution of organic matter must be quantitatively evaluated because these products can never be found in place in the rock where they were formed. Indeed, they may have migrated during geological history, and in any case a large and unknown fraction gets lost when samples are taken and then stored before being analysed. Knowing the elemental analysis of a state E and of a more evolved state E' does not suffice for recreating the amounts of products formed. On the other hand Rock-Eval type pyrolysis of kerogens, including the determination of the residual carbon, can be used to compute the hydrocarbons produced, on the basis of a reasonable hypothesis. Elemental analysis then enables the evaluation of CO2, H2O

  20. L’exposition prolongée des consommateurs à un nouveau produit permet-elle d’accroître son adoption ?

    OpenAIRE

    Masson, Josselin; Aurier, Philippe; D'hauteville, François

    2010-01-01

    Cette recherche évalue l’effet de la consommation à domicile d’un nouveau produit (le vin à teneur réduite en alcool) sur son acceptabilité à long terme par les consommateurs, et suppose que l’exposition au produit et l’information non-sensorielle influenceront leurs évaluations hédoniques. Deux groupes de consommateurs ont alors été exposés soit à un vin normal, soit à un vin à teneur réduite en alcool, en condition aveugle le premier mois puis avec l’indication de leurs teneurs en alcool le...

  1. Radiation Treatment of Meat Products and Animal By-Products; Traitement par Rayonnements des Viandes et Derives et des Sous-Produits Animaux; Radiatsionnaya obrabotka myasnykh produktov i subproduktov zhivotnogo proiskhozhdeniya; Irradiacion de la Carne y sus Derivados

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, P. -I.E. [Danish Meat Research Institute, Roskilde (Denmark)

    1966-11-15

    Application of radiation in food technology can only be considered as an alternative to existing preservation methods when a higher quality product and/or a cheaper product will result, or in cases where no alternative methods exist. With this view in mind, work performed at the Danish Meat Research Institute on sliced bacon, canned hams, luncheon meat, and animal feeding stuffs, i.e. meat and bone meal and blood meal, is reviewed and discussed. The conclusion drawn from the experimental results is that the formation of off-flavours in irradiated meat products is a very serious problem and the most important obstacle to a successful application of irradiation in meat processing. It is, therefore, essential that future research should concentrate on finding means to reduce the irradiation flavour. A number of approaches to solve this problem are mentioned and the Danish work in this field which has been centred mainly on the use of very high dose-rates and of non-equal dose distribution in cans is reviewed, and the concepts briefly described. (author) [French] L'application des rayonnements dans l'industrie alimentaire ne saurait etre consideree en remplacement des methodes de conservation actuelles que s'il en resulte un produit de qualite superieure ou un produit meilleur marche, ou encore lorsqu'on ne peut utiliser aucune methode de rechange. Dans cet esprit, l'auteur examine et commente les travaux accomplis par l'Institut danois de recherches sur la viande concernant le lard en tranches, le jambon en conserve, les pates de viande en conserve (luncheon meat) et les aliments pour animaux, c'est-a-dire les farines de viande et d'os et la farine de sang. Il conclut des resultats experimentaux que la formation de gouts indesirables dans les viandes irradiees pose un probleme tres serieux et constitue l'obstacle le plus important au succes de l'application des rayonnements a la preparation des viandes. Il importe donc que les futures recherches portent avant tout sur

  2. Consommation des produits lactés chez l’enfant et l’adolescent marocain de 2 à 16 ans: une étude monocentrique Consumption of milk products among Moroccan children and adolescents aged 2-16 years: a monocentric study

    Science.gov (United States)

    Berrani, Hajar; Alaoui, Asmae Mdaghri; Ettair, Said; Mouane, Nezha; Izgua, Amal Thimou

    2017-01-01

    Introduction Evaluer la consommation quotidienne des produits laitiers dans une population d’enfants marocains et déterminer les facteurs associés pouvant influencer cette consommation. Méthodes Etude prospective du 1er octobre 2013 au 31 avril 2014. Les enfants âgés entre 2 et 16 ans ont été inclus. Le recrutement a eu lieu dans la ville de Fès. Le recueil des données s’est fait à l’aide d’un questionnaire fréquentiel. Les parents et les enfants inclus ont été interrogés sur la consommation des produits laitiers et les facteurs socio-démographiques avec une évaluation anthropométrique des enfants. L’association des variables à la consommation des produits laitiers a été analysée en analyse univariée et multivariée par un modèle de régression logistique. Résultats L’enquête alimentaire avait intéressé 286 enfants dont 151 filles (52,8 %) et 131 garçons (45,8%). Les enfants âgés de 2 à 3 ans représentaient 26,4 %, ceux âgés de 4 à 7 ans 28,9 %, ceux âgés de 7 à 9 ans 18,3 % et les adolescents âgés de 10 à 16 ans 26,4 %. Les enfants consommaient en moyenne 2.5±1 produits laitiers par jour. Les enfants consommaient au moins 3 produits laitiers par jour dans 57,8% chez les enfants âgés de 2 à 3 ans, 53,6% chez les enfants âgés de 4 à 6 ans, 40% chez les enfants âgés de 7 à 9 ans et 41.2% chez les enfants âgés de 10 à 16 ans. Les facteurs associés à la consommation de trois produits laitiers minimum par jour en analyse univariée étaient le niveau d’instruction maternel analphabète p 90° percentiles p 90° percentiles p = 0.01 OR = 3.9 est et la quantité consommée des produits laitiers et négatif avec le faible niveau de scolarité maternel analphabète p = 0.008 OR = 0.1 et primaire p = 0.009 OR = 0.1. Conclusion La consommation du lait et des autres produits laitiers était inappropriée en particulier chez l’enfant âgé de 7 à 9 ans et l’adolescent de 10 à 16 ans. Le faible niveau d

  3. Sous-produits de la désinfection dans l'eau potable des petits réseaux municipaux: variabilité spatio-temporelle, modélisation et stratégies de suivi

    OpenAIRE

    Guilherme, Stéphanie

    2014-01-01

    Les trihalométhanes (THM) et les acides haloacétiques (AHA) constituent les seules familles réglementées de sous-produits de la désinfection (SPD). Les SPD sont des composés issus de la réaction de la matière organique naturelle présente dans l’eau et du désinfectant lors du traitement de l’eau potable. La plupart de ces composés ne sont pas réglementés, même si plusieurs études ont montré que certains SPD peuvent présenter un risque toxicologique plus important que les THM et les AHA. De nos...

  4. Study of fission product {gamma} spectra in the band 2-500 keV; Etude du spectre {gamma} des produits de fission dans la bande 0-500 keV

    Energy Technology Data Exchange (ETDEWEB)

    Rousseau, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    In the study of the {gamma} spectrum of uranium fission products, particular attention has been given in this note to the part of the spectrum ranging between 0 and 500 keV after a given pile operating programme and the evolution of this spectrum with time after a pile shutdown has been followed. The study be related to the fission products which appear in the pile as a whole or on those produced in a uranium sample assumed to have been placed in the pile. The latter case has been envisaged here. The spectrum determination is based partly on theory and partly on experiment. The pile operating conditions are different in the two cases, which widens the range of validity of the spectra traced here. (author) [French] Dans l'etude du spectre {gamma} des produits de fission de l'uranium, on s'est plus particulierement interesse dans la presente note a determiner la partie du spectre qui s'etend entre 0 et 500 keV, au bout d'un fonctionnement donne de pile, et a suivre l'evolution de ce spectre dans le temps apres un arret de pile. L'etude peut porter sur les produits de fission apparus dans toute la pile ou sur ceux apparus dans un echantillon d'uranium suppose place en pile. C'est ce dernier cas que nous avons envisage. La determination du spectre s'appuie sur une partie theorique et sur une partie experimentale. Les fonctionnements de pile choisis sont differents dans les deux cas, ce qui permet d'etendre la gamme de validite des spectres traces ici. (auteur)

  5. Study of fission product {gamma} spectra in the band 2-500 keV; Etude du spectre {gamma} des produits de fission dans la bande 0-500 keV

    Energy Technology Data Exchange (ETDEWEB)

    Rousseau, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    In the study of the {gamma} spectrum of uranium fission products, particular attention has been given in this note to the part of the spectrum ranging between 0 and 500 keV after a given pile operating programme and the evolution of this spectrum with time after a pile shutdown has been followed. The study be related to the fission products which appear in the pile as a whole or on those produced in a uranium sample assumed to have been placed in the pile. The latter case has been envisaged here. The spectrum determination is based partly on theory and partly on experiment. The pile operating conditions are different in the two cases, which widens the range of validity of the spectra traced here. (author) [French] Dans l'etude du spectre {gamma} des produits de fission de l'uranium, on s'est plus particulierement interesse dans la presente note a determiner la partie du spectre qui s'etend entre 0 et 500 keV, au bout d'un fonctionnement donne de pile, et a suivre l'evolution de ce spectre dans le temps apres un arret de pile. L'etude peut porter sur les produits de fission apparus dans toute la pile ou sur ceux apparus dans un echantillon d'uranium suppose place en pile. C'est ce dernier cas que nous avons envisage. La determination du spectre s'appuie sur une partie theorique et sur une partie experimentale. Les fonctionnements de pile choisis sont differents dans les deux cas, ce qui permet d'etendre la gamme de validite des spectres traces ici. (auteur)

  6. Comment calculer le contenu énergétique des produits d'origine pétrolière et de leurs substituts d'origine charbonnière ou végétale How to Calculate the Energy Content of Products of Petroleum Origin and of Their Substitutes from Coal Or Biomass

    Directory of Open Access Journals (Sweden)

    Leprince P.

    2006-11-01

    Full Text Available Le contenu énergétique des produits pétroliers issus du raffinage, des produits de vapocraquage de naphta et de quelques produits de la pétrochimie, a été calculé en prenant en considération, la dépense énergétique entre coproduits ou sous-produits d'une même transformation, les variantes de procédés et l'effet des divers modes de fourniture d'énergie nécessaire à la transformation considérée. The energy content of petroleum products coming from refining, of naphta steam-cracking products and of various petrochemical products is calculated by taking into consideration the energy expenditure between the coproducts or by products from the same transformation, the different processes and the effect of different ways in which to supply the energy required for the transformation being considered.

  7. Comparison of the Economic Aspects of the Treatment and Storage of Fission Products from Installations Processing Irradiated Natural Uranium; Aspects Economiques Compares du Traitement et du Stockage des Produits de Fission Issus des Usines de Traitement de l'Uranium Naturel Irradie; Sravnitel'nye ehkonomicheskie aspekty obrabotki i khraneniya produktov deleniya, poluchaemykh na zavodakh po pererabotke obluchennogo prirodnogo urana; Aspectos Economicos Comparados del Tratamiento y del Almacenamiento de los Productos de Fision que Salen de las Plantas de Tratamiento de Uranio Natural Irradiado

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L.; Lesur, P.; Giraud, R. [Commissariat a l' Energie Atomique, Paris (France); Wanlin, J. [Societe Saint-Gobain Techniques Nouvelles, Paris (France)

    1966-02-15

    The paper summarizes the main policies adopted for the management of fission product effluents and briefly describes the essential technical features of the stainless steel storage installations (in acid medium) used in France, giving a breakdown of the costs involved. The dependence of these costs on the activity of the solutions stored and on their heat release is shown. The second part of the paper discusses the cost of storage in terms of feasible tank size. The optimum size for such tanks and the rate at which they are placed in service are determined in relation to the characteristics of the fission products to be stored and to the respective capacities of the installations for processing irradiated natural uranium. It is shown that although storage costs depend on the assumptions made regarding the useful life of installations, rates of interest and operating costs, optimum policy decisions (as to size and rate of entry into service) are independent of these assumptions, being determined solely by the variation in the cost of tanks, according to size. These are the factors which enter into the optimized cost of storing these effluents indefinitely. In the third part, this method of indefinite storage is compared with other possibilities of fission product management, e.g. vitrification and separation of Cs and Sr. The paper discusses the economics of the various methods and summarizes some possible long-term solutions. (author) [French] Apres avoir rappele les principales politiques de gestion le plus souvent envisagees pour les produits de fission, le memoire decrit sommairement les caracteristiques techniques essentielles des installations de stockage en acier inoxydable (en milieu acide) utilisees en France et la structure des couts de ces installations. U montre la sensibilite de ces couts a l'activite des solutions stockees et a leur degagement de chaleur. Dans une deuxieme partie, les auteurs examinent leur cout de stockage, selon la taille des

  8. Are They Climbing the Pyramid? Rating Student-Generated Questions in a Game Design Project / Grimpent-ils la pyramide? Évaluation des questions produites par les étudiants dans un projet de conception de jeux

    Directory of Open Access Journals (Sweden)

    Jason Paul Siko

    2013-02-01

    Full Text Available Researchers have examined the use of homemade PowerPoint games as an instructional technique to improve learning outcomes. However, test data have shown no significant difference in performance between high school chemistry students who created games and students who did not (Siko, Barbour, & Toker, 2011. One of the justifications for the use of the games is that students will, with practice, write higher-order questions when constructing the games. Two subject matter experts rated over 2,500 questions from games created by students in an environmental chemistry class through thematic analysis using Bloom’s taxonomy as a coding scheme. The students wrote primarily recall questions, and students who created games on two occasions did not write more questions than students who only created games once. This suggests that changes to the question-writing aspect of the game project may be necessary in order to see improvements in achievement when compared to control groups. Les chercheurs ont étudié l’usage de jeux PowerPoint maison en tant que technique pédagogique visant à améliorer les résultats d'apprentissage. Les données des tests n'ont toutefois révélé aucune différence significative quant au niveau de performance des étudiants du secondaire en chimie ayant créé des jeux et celui des étudiants n’en ayant pas conçus (Siko, Barbour, et Toker, 2011. L’utilisation des jeux est notamment justifiée par l’idée que, pratique aidant, les étudiants écrivent des questions plus complexes lorsqu’ils élaborent des jeux. Au moyen d’une analyse thématique utilisant la taxonomie de Bloom comme système de codification, deux experts chimistes ont évalué plus de 2500 questions provenant de jeux conçus par des étudiants d’une classe de chimie environnementale. Les étudiants ont rédigé principalement des questions faisant appel à la mémoire, et les étudiants ayant créé des jeux à deux reprises n’ont pas produit

  9. Contribution to the study of the diffusion of fission products in uranium; Contribution a l'etude de la diffusion des produits de fission dans l'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Tournier, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-10-15

    In this work we have developed a simple method for determining the diffusion constants and the solid-state solubilities of a metal which is volatile and only slightly soluble in second metal. This method has been applied to the behaviour of certain fission products in {gamma} uranium: strontium, barium, lanthanum, samarium and cerium. This work has made it possible to show the effect of the atomic radius of the solute on the diffusion constants. (author) [French] Dans ce travail nous avons mis au point une methode simple permettant de determiner les constantes de diffusion ainsi que les solubilites a l'etat solide d'un metal volatil et peu soluble dans un autre. Cette methode a ete appliquee au comportement de certains produits de fission dans l'uranium {gamma}: strontium, baryum, lanthane, samarium et cerium. Cette etude a permis de mettre en evidence le role du rayon atomique du solute sur les constantes de diffusion. (auteur)

  10. Risques d'exposition aux résidus de pesticides via les produits ...

    African Journals Online (AJOL)

    NGOM

    peut également affecter les organismes non ciblés. Ainsi beaucoup d'insectes .... Pour les produits agricoles, une micro- extraction de ..... sont les principaux facteurs de la .... Contrôle des pesticides organochlors dans le lait et produits laitiers.

  11. New instruments and methods for measuring the concentration of radioactive products in the atmosphere; Appareils recents et methodes nouvelles pour la mesure de la concentration des produits radioactifs dans l'atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Jehanno, C; Blanc, A; Lallemant, C; Roux, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    ) [French] Differents enregistreurs pour aerosols radioactifs ont ete realises pour mesurer la pollution de l'atmosphere des laboratoires ou l'atmosphere exterieure. EAR 600. - Permet de mesurer en continu instantanement et 3 a 10 heures apres le prelevement des concentrations d'aerosols emetteurs {alpha} ou {beta} allant de quelques 10{sup -11} a quelques 10{sup -8} curies par metre cube d'air. EAR 800. - Permet de mesurer en continu des concentrations d'aerosols emetteurs {alpha} allant de 10{sup -11} a 10{sup -5} curie par metre cube d'air, et des concentrations d'aerosols emetteurs {beta} allant de 10{sup -11} a 10{sup -1} curie par metre cube d'air. EAR PLUTONIUM. - Permet de detecter en quelques minutes 1000 DMP (2.10{sup -9} curie par metre cube) et en 8 heures 1 DMP (2.10{sup -12} curie par metre cube). Deux methodes sont utilisees pour separer l'activite due au plutonium de celle due aux derives du radon et du thoron: a) par discrimination d'amplitude, b) par les coincidences (a,b) RaC' et ThC-ThC'. SP 4. - Monte sur jeep, cet ensemble permet la mesure de l'irradiation produite au sol par le panache des piles. La sensibilite est de 5{mu}R/h. A.D.I.R. - Cet appareil autonome et portatif est destine a la mesure instantanee des teneurs en radon de l'atmosphere des mines. Il permet de mesurer des teneurs de l'air variant entre 0,4 et 400.10{sup -10} curie par litre d'air (0,4 et 400 DPM). La mesure des retombees radioactives est faite apres collection de cette activite par un pluviometre special comportant une surface adhesive et une cartouche de resines echangeuses d'ions. La radioactivite des retombees varie entre quelques 10{sup -9} et quelques 10{sup -7} curie par metre carre et par mois. La mesure des concentrations de l'atmosphere en produits de fission est faite apres collection sur papier filtre. Les concentrations mesurees dans l'air au niveau du sol varient entre 10{sup -13} et 10{sup -12} curie par metre cube. (auteur)

  12. Mesure de la Polarisation des Lambda Produits dans les Collisions Positron-Electron AU Lep a L'aide du Detecteur Opal

    Science.gov (United States)

    Vandenplas, Denis

    Le Modele Standard est le cadre theorique general qui, jusqu'a present, a permis l'interpretation de tous les resultats experimentaux en physique des hautes energies. Cette theorie decrit, entre autres, la production d'une paire de particules elementaires, formee d'un quark et d'un antiquark, a partir de la desintegration de l'un des bosons mediateurs de l'interaction faible, le Z^0. Cependant, dans ce cas precis, la transformation subsequente des quarks primaires en particules reelles, un processus appele hadronisation, n'est decrite qu'a l'aide de modeles phenomenologiques. Afin de sonder les mecanismes de l'hadronisation, cette these presente la mesure du transfert du spin d'un quark etrange primaire a une particule appelee Lambda lors des desintegrations hadroniques du Z^0. L'etude a ete realisee dans le cadre de la collaboration OPAL, une des quatre experiences menees au collisionneur LEP, la ou des electrons et des positrons sont acceleres jusqu'a une energie commune, sqrt{s} = {rm E_ {cm}}, voisine de l'energie de production du rm Z^0, M_{Z ^0} egale a 91.3 GeV. La theorie electrofaible precise la direction du spin, c'est-a-dire la polarisation, d'un quark etrange primaire provenant de la desintegration d'un Z ^0. Quant a lui, le modele des quarks etablit que l'orientation du spin d'un Lambda est directement reliee a la polarisation du quark etrange dont il provient. La question est de determiner dans quelle mesure la polarisation du quark primaire est transmise au Lambda a la suite du processus de l'hadronisation, decrit dans le cadre de la ChromoDynamique Quantique. Une estimation, qui tient compte de tous ces differents aspects theoriques, evalue a 30% la polarisation des Lambda dont l'impulsion est superieure a 15 GeV/c. La mesure experimentale de la polarisation repose sur l'identification des Lambda a partir de la reconstitution de la desintegration Lambdato ppi^-. Ce processus, qui se deroule par le biais de l'interaction faible, viole la parite car

  13. Les produits agricoles traditionnels peuvent améliorer la nutrition et ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    14 janv. 2013 ... Les produits agricoles traditionnels peuvent améliorer la nutrition et augmenter le revenu des femmes ... des élèves en matière de nutrition; dans le cas des femmes, cette augmentation a été de 7 à 8 %. .... Articles connexes ...

  14. The study by means of a photomultiplier of the scintillations produced by {alpha} particles striking a zinc sulphide screen; Etude, au photomultiplicateur, des scintillations produites par les particules {alpha} dans un ecran de sulfure de zinc. Application a la numeration precise des particules {alpha}

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-06-15

    The object of the study is the accurate counting of {alpha} particles by p-m. detection of their scintillations upon impact with a zinc sulphide screen. The main advantage of the method is the extreme simplicity of the electronics used: the possibility of obtaining a utilizable pulse from the p-m. (EMI5311) without any amplification, and in linear response, is demonstrated. The scintillation produced by an impact on Zn-S has also been studied experimentally. The decrease of light intensity in relation to time may be interpreted by the exponential relation: I = I{sub 0} exp (-t / {tau}) whereby {tau} = (39 {+-} 0,1) 10{sup -6} s. The relation between scintillation intensity and remaining trajectory after travel through a given air-space has also been determined. Possible suitable applications of this method of {alpha} counting are those where good stability and low background are necessary. Results stated bear on air contamination studies, isotopic composition variation measurement of uranium, bismuth content measurement in alloys by irradiation of specimens in a thermal neutron flux and {alpha} count on the Po formed. (author) [French] Ce travail est consacre a l'etude de la numeration precise des particules {alpha} par detection au photomultiplicateur des scintillations produites par ces particules dans un ecran de sulfure de zinc. Le principal avantage de cette methode reside dans l'extreme simplicite de l'appareillage electronique; il est en effet montre qu'il est possible, tout en convoyant une reponse lineaire, d'obtenir du photomultiplicateur (EMI5311) un signal electrique utilisable sans aucune amplification. La scintillation produite par l'impact des particules {alpha} sur un ecran de Zn-S est etudiee experimentalement. La decroissance de l'intensite lumineuse en fonction du temps est interpretable par la relation exponentielle I = I{sub 0} exp (-t / {tau}) avec {tau} = (39 {+-} 0,1) 10{sup -6} s. La relation entre l'intensite de la scintillation et le

  15. Structures and properties of (U,Pu)O{sub 2} containing non-active fission products. A simulation of irradiated nuclear fuel; Structure et proprietes de (U, Pu)O{sub 2} contenant des produits de fission sous forme inactive. Une simulation de combustible nucleaire irradie

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    We have made oxides with the same uranium and plutonium content, the same stoichiometry and the same fission product content as an oxide fuel (U{sub 0,8}PuO{sub 2})O{sub 1,96} after 2 per cent burn up. We have calculated the stoichiometry changes due to irradiation and checked the calculation by X rays parameters measurements. We have calculated and measured the contraction of the oxide lattice due to fission products in solid solution. Microprobe analysis of precipitates have been made and have lead to the identification of non metallic barium containing compounds and have shown the particular behaviour of molybdenum. Some physical properties have been measured especially the electrical resistivity, the thermal diffusivity and the vapour pressure of zirconium in solid solution. (author) [French] Nous avons fabrique des oxydes dont la composition en uranium et plutonium, la stoechiometrie et la teneur en produit de fission, sont identiques a celles d'un oxyde (U{sub 0,8}PuO{sub 2})O{sub 1,96} ayant subi 2 pour cent de combustion. Nous avons calcule les changements de stoechiometrie entraines par l'irradiation et controle ces calculs par des mesures de parametre. Nous avons calcule et mesure la contraction du reseau due aux produits de fissions solubles dans la matrice. Des analyses a la microsonde des precipites de produits de fission insolubles ont ete faites et ont conduit a l'identification de composes non metalliques contenant du baryum et a la mise en evidence du role particulier du molybdene. Certaines proprietes physiques ont ete mesurees sur ces composes, en particulier la resistivite electrique, la diffusivite thermique et la tension de vapeur du zirconium dissout dans la matrice. (auteur)

  16. The Use of Ionizing Radiation as a Means of Processing Foodstuffs for Storage: Present Status and Future Prospects; Utilisation des Rayonnements Ionisants pour la Conservation de Produits Alimentaires: Situation Actuelle et Perspectives; Sostoyanie i perspektivy primeneniya ioniziruyushchikh izluchenij dlya obrabotki pishchevykh produktov v svyazi s ikh khraneniem; Estado Actual y Perspectivas del Empleo de las Radiaciones Ionizantes para la Conservacion de los Productos Alimenticios

    Energy Technology Data Exchange (ETDEWEB)

    Rogachev, V. I. [Vsesojuznyj Nauchno-Issledovatel' skij Institut Konservnoj i Ovoshesushil' noj Promyshlennosti Moskva, SSSR (Russian Federation)

    1966-11-15

    The use of ionizing radiation for processing foodstuffs is being studied in the USSR, particularly in connection with the following: (a) prevention of sprouting in potatoes and onions; (b) disinfestation of foodstuffs; (c) suppression of microbe activity; either sterilization or partial inhibition of microflora activity to prolong the shelf life of various foodstuffs; and (d) alterations in the ripening time of fruits and vegetables after picking and/or harvesting. The paper reports the status of work performed in the USSR during recent years on each of these general topics and the prospects for the practical application of irradiation to a number of products are considered. Among the products in question are meat and meat products (raw and cooked semi-finished products, sausage products), domestic poultry, various fruits and vegetables, potatoes, grain, dehydrated products (dried fruits and vegetables, dried food concentrates). Practical methods of irradiating potatoes and onions to prevent sprouting during storage have already been developed, and very soon it will be possible to use radiation for the disinfestation of foodstuffs on an industrial scale. (author) [French] Les etudes sur l'utilisation des rayonnements ionisants pour la conservation des produits alimentaires se poursuivent en URSS.dans les domaines suivants: a) prevention de la germination des pommes de terre et des oignons; b) desinsection des produits alimentaires; c) elimination de l'activite biologique des micro-organismes en vue de la sterilisation ou de l'elimination partielle de l'activite biologique de la microflore en vue de prolonger les delais de conservation de divers produits alimentaires; et d) modifications des delais de maturite apres recolte des fruits et legumes. Pour chacun de ces domaines, l'auteur indique l'etat des travaux effectues en URSS pendant ces dernieres annees et examine les perspectives d'utilisation des rayonnements pour un certain nombre de produits. Au nombre de ces

  17. Electron paramagnetic resonance study of radicals formed by radiolysis at 77 K of nitroalkanes and of their solutions in organic glasses. Chromatography analysis of radiolysis products of nitromethane in ethanol solution in a vitreous medium; Etude par resonance paramagnetique electronique des radicaux formes par radiolyse a 77 K des nitroalcanes et de leurs solutions dans les verres organiques analyse par chromatographie des produits de la radiolyse du nitromethane en solution dans l'ethanol en milieux vitreux

    Energy Technology Data Exchange (ETDEWEB)

    Rosilio, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-05-01

    With a view to explaining the formation of the final products resulting from the photolysis and the radiolysis of nitro-alkanes, we have attempted to identify the paramagnetic species formed as intermediates during the radiolysis. Our work has covered the structure and the reactivity of the radicals formed by 7 irradiation of the nitrogen containing derivatives at 77 K, and on the mechanism of formation and of disappearance of these radicals in the various matrices used. The radicals resulting from the removal of a hydrogen atom in the {alpha} position of the NO{sub 2} group, and the radicals resulting from addition reactions on the nitrogen group characterized by an unpaired electron on the nitrogen have been identified, either during the radiolysis of pure nitroalkanes, or during the radiolysis of nitro-alkanes in solution in organic glasses at 77 K. A study has been made of the conformation and the movements of radicals in the matrices, and the mechanism of formation of the observed radicals produced generally by the capture by the nitro-alkanes of primary radiolysis species. The nitro-alkanes in ethanol solution can behave as traps both for electrons and for free radicals. The study of the radiolysis of nitro-alkanes in solution in a polar ethanol glass has been completed with chemical analyses on the final radiolysis products; it has been possible to deduce the capture efficiency of trapped electrons and of free radicals by nitro-alkanes in ethanol. For this we have determined the radio-chemical yields of hydrogen, acetaldehyde and glycol as a function of the capture agent concentration, for the nitro-methane-ethanol system. A mechanism for the disappearance of the observed radicals is proposed. (author) [French] Dans le but d'expliquer la formation des produits finals formes au cours de la photolyse et la radiolyse des nitroalcanes, nous nous sommes proposes d'identifier les especes paramagnetiques se formant intermediairement au cours de la radiolyse. Notre

  18. Electron paramagnetic resonance study of radicals formed by radiolysis at 77 K of nitroalkanes and of their solutions in organic glasses. Chromatography analysis of radiolysis products of nitromethane in ethanol solution in a vitreous medium; Etude par resonance paramagnetique electronique des radicaux formes par radiolyse a 77 K des nitroalcanes et de leurs solutions dans les verres organiques analyse par chromatographie des produits de la radiolyse du nitromethane en solution dans l'ethanol en milieux vitreux

    Energy Technology Data Exchange (ETDEWEB)

    Rosilio, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-05-01

    With a view to explaining the formation of the final products resulting from the photolysis and the radiolysis of nitro-alkanes, we have attempted to identify the paramagnetic species formed as intermediates during the radiolysis. Our work has covered the structure and the reactivity of the radicals formed by 7 irradiation of the nitrogen containing derivatives at 77 K, and on the mechanism of formation and of disappearance of these radicals in the various matrices used. The radicals resulting from the removal of a hydrogen atom in the {alpha} position of the NO{sub 2} group, and the radicals resulting from addition reactions on the nitrogen group characterized by an unpaired electron on the nitrogen have been identified, either during the radiolysis of pure nitroalkanes, or during the radiolysis of nitro-alkanes in solution in organic glasses at 77 K. A study has been made of the conformation and the movements of radicals in the matrices, and the mechanism of formation of the observed radicals produced generally by the capture by the nitro-alkanes of primary radiolysis species. The nitro-alkanes in ethanol solution can behave as traps both for electrons and for free radicals. The study of the radiolysis of nitro-alkanes in solution in a polar ethanol glass has been completed with chemical analyses on the final radiolysis products; it has been possible to deduce the capture efficiency of trapped electrons and of free radicals by nitro-alkanes in ethanol. For this we have determined the radio-chemical yields of hydrogen, acetaldehyde and glycol as a function of the capture agent concentration, for the nitro-methane-ethanol system. A mechanism for the disappearance of the observed radicals is proposed. (author) [French] Dans le but d'expliquer la formation des produits finals formes au cours de la photolyse et la radiolyse des nitroalcanes, nous nous sommes proposes d'identifier les especes paramagnetiques se formant intermediairement au cours de la

  19. Dépendance économique aux produits forestiers non ligneux : cas des ménages riverains des forêts de Boulon et de Koflandé, au Sud-Ouest du Burkina Faso

    DEFF Research Database (Denmark)

    Ouédraogo, M; Ouédraogo, D; Thiombiano, T

    2013-01-01

    forêts. Les résultats montrent que le revenu moyen annuel par ménage est de 846 800 F CFA avec une contribution de 60% du revenu des cultures et 12% du revenu d’élevage. Les PFNL procurent en moyenne 72 479 F CFA par ménage et par an à près de 93% des ménages enquêtés. La dépendance économique des...

  20. Study of a micro-sublimation apparatus with removal of the vapours by pumping; application to the analysis of fluorinated products (1963); Etude d'un appareillage de microsublimation avec entrainement des vapeurs par pompage et application a l'analyse des produits fluores (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Delvalle, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    Micro-sublimation analysis presents definite advantages both from the qualitative and quantitative points of view. An automatic micro-sublimation analysis apparatus has been developed for the analysis of fluorinated products (ClF{sub 3}, HF, UF{sub 6}, etc.) but this is only one particular application of a method which has a far wider field of possible applications. We give first the most favorable conditions for the operation of such an apparatus. These conditions are the use of a detector which is linear and independent of the nature of the gas, the flow of the sublimed vapours in the conditions of molecular flow, and finally a reproducible and linear re-heating of the separating trap. The apparatus thus built has the advantage of yielding any analysis without prior calibration. It also makes possible the easy identification of an unknown product by the determination of its vapour pressure curve and its molecular weight. The analysis of fluorinated products with this apparatus has shown that the experimental results agree well with what is expected. (author) [French] L'analyse par microsublimation presente un interet certain tant au point de vue qualitatif que quantitatif. Nous avons mis au point un appareillage automatique d'analyse par microsublimation pour l'analyse des produits fluores (CIF{sub 3}, HF, UF{sub 6}, etc.) mais il ne s'agit que de l'application a un cas particulier d'une methode ayant un champ d'applications bien plus vaste. Nous exposons tout d'abord les conditions les plus favorables au bon fonctionnement d'un tel appareil. Ces conditions sont l'emploi d'un detecteur lineaire et independant de la nature du gaz, l'ecoulement des vapeurs sublimees en regime moleculaire et enfin un rechauffage reproductible et lineaire du piege separateur. L'appareil ainsi realise presente l'avantage d'effectuer une analyse quelconque sans etalonnage prealable. Il permet en outre d'identifier aisement un corps inconnu par la determination de sa courbe de tension

  1. Produits locaux entre vente directe, circuit-court et action collective. Entretien avec Bertil Sylvander

    Directory of Open Access Journals (Sweden)

    Virginie Amilien

    2005-05-01

    Full Text Available V.A. : Bertil Sylvander, vous êtes un des pères de la notion de conventions de qualité en matière de produits de qualité et d’origine, et vous possédez une profonde connaissance des aspects socio-économiques de l'agriculture et de l'alimentation locale, incluant les produits aux origines déterminées et les produits labellisés... et c’est d'ailleurs à ce titre que vous nous accordez un entretien aujourd’hui, pour le numéro sur les produits alimentaires locaux du journal AoFood. Je commencerai ...

  2. Evaluation des caractéristiques physico-chimiques et sensorielles de la purée de tomate locale produite à petite échelle au Bénin

    Directory of Open Access Journals (Sweden)

    Dossou, J.

    2007-01-01

    Full Text Available Physico-chemical and Sensorial Evaluation of Local Tomato Past Produced at Small Scale in Benin. L'article fait le point sur les avancements notés dans l'éradication de la peste bovine en Afrique sub-saharienne, avec à l'horizon 2010, l'éradication mondiale de la peste, telle que prévu par le Global Rinderpest Eradication Programme (GREP. Le programme Pan-Africain de Contrôle des Epizooties (PACE, un programme exécuté depuis 1999 sous l'égide de l'Union Africaine (UA avec le concours financier du Fonds Européen pour le Développement (UE, exécute actuellement la dernière phase de ce programme d'éradication. Les auteurs passent en revue l'historique, le diagnostic et les outils de contrôle de cette maladie, tant chez le bétail que chez la faune. A l'heure actuelle, il ne reste qu'une partie de l'Afrique de l'est où sévit la maladie. Cependant aucun foyer n'y a été signalé depuis 2001. La seule lignée encore rencontrée (lignée 2 africaine se cantonne à l'écosystème somalien, qui regroupe la Somalie, l'est du Kenya et la 5ième région de l'Ethiopie. Réapparue en 1994, 1998, et 2001 dans la faune sauvage, cette lignée représente donc la cible des derniers efforts d'éradication. En dehors de cette zone, la peste bovine semblerait être absente de l'Afrique de l'est. En Afrique de l'ouest et du centre où la maladie est absente depuis des décennies, les activités sont axées sur la certification internationale (par l'Organisation Mondiale de la Santé Animale, OIE de l'absence de la maladie et de l'infection. Sur les 30 pays que couvre le PACE, 12 pays ont obtenu à ce jour le statut 'indemne de l'infection': Bénin, Burkina Faso, Burundi, Congo, Erythrée, Guinée, Guinée Bissau, Mali, RDC, Rwanda, Sénégal et Togo. Onze pays enfin, la Côte d'Ivoire, l'Ethiopie, le Ghana, le Kenya, la Mauritanie, le Niger, le Nigeria, l'Ouganda, le Soudan, la Tanzanie et le Tchad ont été déclarés 'indemnes de maladie' (en ce

  3. Treatment of solutions of fission products - Separation of caesium-137; Traitement des solutions de produits de fission - Separation du cesium-137; Obrabotka rastvorov produktov deleniya - Razdelenie tseziya-137; Tratamiento de soluciones de productos de fision - Separacion del cesio-137

    Energy Technology Data Exchange (ETDEWEB)

    Stiennon-Bovy, R [Centre d' Etude de l' Energie Nucleaire, Mol (Belgium); Gvion, R [Commission Israelienne de l' Energie Atomique, Tel-Aviv (Israel)

    1962-01-15

    For the industrial recovery of caesium-137 from solutions of fission products, the authors utilized the analytical method for determination of caesium by dipicrylamine, adapting it to use on an industrial scale and to the high level of the activities encountered. The process recommended makes it possible both to isolate caesium as a chloride and to recover the precipitation reagent, in one and the same operation. A basic method is suggested. The authors studied the effect of radiation on dipicrylamine and its compounds, this effect proving to be practically nil for solid compounds and negligible for their solutions. The entrainment of caesium by ammonia ion was also studied. The advantages of the proposed process are : high decontamination of the caesium, simple operation and free recycling fo the reagent, high yield for caesium recovery and for dipicrylamine, considerable concentration of caesium activity, operation at room temperature and possibility of continuous operation. By this process caesium can be recovered before certain fission products are eliminated. (author) [French] Pour la recuperation industrielle du cesium-137 des solutions de produits de fission, les auteurs ont adapte le procede analytique de dosage du cesium par la dipicrylamine a l'echelle industrielle et au niveau eleve des activites traitees. Le procede preconise permet en une seule operation d'isoler le cesium sous forme de chlorure et de recuperer aisement le reactif de precipitation; un schema de principe est propose. Les auteurs ont etudie l'effet des radiations sur la dipicrylamine et ses composes; cet effet s'avere pratiquement nul pour les composes solides et negligeable pour leurs solutions. L'entrainement du cesium par l'ion ammoniaque est etudie. Les avantages du procede propose sont la decontamination elevee du cesium, la simplicite du mode operatoire avec recyclage aise du reactif, le rendement eleve pour la recuperation du cesium et pour la dipicrylamine, une concentration

  4. Amount and activity of fission products which will be obtainable in France in the immediate future taking into account the development of atomic energy; Quantite et activite des produits de fission abtenus en France dans les annees a venir compte tenu du developpement de l'energie atomique

    Energy Technology Data Exchange (ETDEWEB)

    Guirlet, J; Lavie, J M [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    By using the Wigner and Way formula, the activity of the complex mixture of fission products produced in a pile may be estimated theoretically in advance. This study was carried out on the basis of forecasts, in the case of France for the production of electricity of atomic origin up to the year 1975. The uranium was assumed to be in the pile during periods of three months and six months. It is also possible to find the activity of a particular fission product and to give its decay rate. The element chosen is strontium for a three months' activation period. Each set of curves gives at any moment the total activity accumulated, and the characteristic activity of the fission products corresponding to a given half-life. (author) [French] En utilisant la formule de Wigner et Way, il est possible de prevoir theoriquement l'activite du melange complexe de produits de fission provenant d'une pile. L'etude a ete faite en tenant compte de previsions, en ce qui concerne la France, de la production d'electricite d'origine atomique jusqu'en 1975. On a suppose des temps de sejour en pile de l'uranium de trois mois et de six mois. Il est possible egalement de trouver l'activite d'un produit de fission particulier, et de donner sa decroissance. Le corps choisi est le strontium pour un temps d'activation de trois mois. Chaque ensemble de courbes donne a tout instant l'activite totale accumulee, et l'activite propre des produits de fission correspondant a une periode donnee. (auteur)

  5. Risk analysis related to dangerous materials transport and storage in urban areas; L'integration du risque lie au transport et au stockage des produits chimiques dans la planification urbaine: l'apport des outils d'analyse decisionnelle

    Energy Technology Data Exchange (ETDEWEB)

    Lombard, J; Hubert, P; Pages, P

    1989-12-01

    Risk management in an urban areas not always an easy task and the selection of appropriate prevention measure is often difficult. Consequences of an accident can be multiple (mortality, destruction, pollution, interruption of supplies, economic losses, traffic difficulties), and preventive measures are difficult to compare. The objective of this report is to present different methods applicable for decision making emphasising the criteria for their intercomparison and their limitations. In any case a more sophisticated analysis is needed for risk management in urban areas. Principals of methods needed for decision making are presented. These methods are based on a single criteria (regular constraint), on a few criteria that can be measured (cost-benefit), or a number of criteria at choice. These rather general methods should be adaptable to be applied for specific domain. For risk management the following adaptation are presented: identifying the limit of maximum individual risk (generalisation of regular constraint); adoption of different values of human life as a function of nature of consequences (generalisation of cost-benefit method), application of risk avoidance factors. These different developments predict versions of tools for decision making which can be applicable to risk management in urban areas. [French] La gestion des risques en milieu urbain n'est pas toujours une tache aisee et la selection du moyen de prevention approprie sera souvent difficile. En effet, les consequences d'un accident peuvent etre multiples (mortalite, morbidite, destruction, pollution, interruption de reseaux, pertes economiques, difficultes de circulation...) et les moyens de prevention envisageables pour limiter l'occurrence d'un accident et/ou les consequences associees seront alors difficiles a comparer. Le recours a une methode d'evaluation permettant de quantifier puis de comparer les merites respectifs de ces differents moyens devient aujourd'hui necessaire afin de

  6. Utilisation des huiles végétales et de leurs produits de transestérification comme carburants Diesel Use of Vegetable Oils and Their Transesterification Products As Diesel Fuels

    Directory of Open Access Journals (Sweden)

    Gateau P.

    2006-11-01

    Full Text Available L'utilisation d'huiles végétales et de leurs dérivés comme carburants Diesel a fait l'objet, depuis 1981, de plusieurs études financées par l'Agence Française pour la Maîtrise de l'Energie (AFME et réalisées par l'institut Français du Pétrole (lFP en collaboration avec Elf Renault, le Centre d'Etudes et d'Expérimentation du Machinisme Agricole Tropical (CEEMAT et l'institut de Recherches pour les Huiles et Oléagineux (IRHO. Ce document rassemble les résultats obtenus au banc d'essai sur plusieurs types de moteurs représentant un assez large éventail d'applications, depuis le motoculteur utilisé en agriculture africaine jusqu'au moteur classique de tracteur ou de camion. Deux types de produits ont été examinés : les huiles végétales elles-mêmes employées pures ou en mélange au gazole, et les esters méthyliques de ces huiles utilisés tels quels. Lors d'un fonctionnement de courte durée les huiles aussi bien que les esters conduisent globalement à un fonctionnement satisfaisant du moteur; les pertes de performances par rapport au gazole restent modérées voire imperceptibles. Les seuls problèmes dans ce cas concernent la mise en oeuvre, difficile avec les huiles en raison de leur très forte viscosité, beaucoup plus aisée avec les esters. En endurance, l'inconvénient majeur des huiles végétales et de leurs dérivés concerne la formation de dépôts au nez des injecteurs. Sur les moteurs rustiques à préchambre (type Hatz ce phénomène reste limité puisqu'il a été possible de conduire, sans incident, un ensemble d'essais d'endurance de 1100 h avec différents types d'huiles pures (arachide, coton, palme. Sur les moteurs à Injection directe la formation de dépôts constitue une très sérieuse contrainte puisqu'elle conduit pratiquement à proscrire l'utilisation d'huiles même en mélange (25 ou 50 % dans le gazole. Les esters peuvent alors être proposés à condition qu'un certain nombre de pr

  7. Les produits agricoles traditionnels peuvent améliorer la nutrition et ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    14 janv. 2013 ... Ce n'est un secret pour personne que les produits agricoles traditionnels comme les mils et les légumineuses à graines sont très nutritifs. C'est pourquoi des chercheurs collaborent actuellement avec des femmes en Inde et en Éthiopie pour faciliter l'utilisation à des fins personnelles (pour la préparation ...

  8. Fission-Product Separation as a Final Solution to the Problem of Storing Highly Radioactive Waste; La Separation des Produits de Fission Comme Solution Definitive du Stockage des Dechets Fortement Radioactifs; 0412 042b 0414 ; La Separacion de los Productos de Fision Como Solucion Definitiva del Problema del Almacenamiento de los Desechos de Elevada Radiactividad

    Energy Technology Data Exchange (ETDEWEB)

    Raggenbass, A.; Lefevre, J. [Centre d' Etudes Nucleaires, Saclay (France)

    1963-02-15

    'isolement du cesium-137 et du strontium-90 avec un facteur de decontamination d'au moins 10{sup 4}, ce qui permettrait d'envisager le rejet, apres un traitement d'effluents classique, au bout d'une periode de 10 a 20 ans. Le but du memoire est de faire le point de cette question en l'annee 1962. Les progres realises dans les methodes de separation du cesium et du strontium permettent d'envisager l'obtention de ce facteur 10{sup 4} dans des conditions exploitables industriellement. Des methodes pleines de promesses sont: a) Pour le cesium-137, la precipitation par l'acide phosphotungstique, l'echange sur un sel d'ammonium d'un heteropolyacide, la fixation par un phosphate de zirconium. b) Pour le strontium-90, la precipitation d'oxalate, l'extraction par l'acide di-2-ethyl-hexylphosphorique, l'echange sur des sels varies, sulfate de strontium, etc. Ces progres chimiques sont renforces par les progres realises dans le traitement industriel des effluents et permettent de considerer comme techniquement possible la solution preconisee par Glueckauf. Parallelement, le developpement de l'utilisation de grandes quantites de produits de fission, particulierement dans les programmes SNAP, justifie des investissements qui seront au moins pairtiellement recuperes par la vente des produits fabriques. Il est certain que des sources refractaires, a resistance tres elevee a tous les agents d'agression exterieurs, constituent le mode de stockage le plus satisfaisant pour des produits aussi dangereux et d'aussi longue periode. L'auteur considere done, techniquement et psychologiquement, Inverted-Exclamation-Mark /utilisation de sources concentrees a gainage riche comme le moyen de stockage presentant le plus de garanties. Une discussion comparative de cette methode avec la methode d'incorporation dans les verres meriterait un examen complet et approfondi. (author) [Spanish] En la Conferencia de Ginebra de 1955, Glueckauf formplo la hipotesis de que los problemas planteados por las soluciones de

  9. Radio-chemical applications of columns of precipitated insoluble sulphates - contribution to the study of fission product solutions (1962); Applications en radiochimie de colonnes de precipites de sulfates insolubles - contribution a l'etude des solutions vieillies de produits de fission (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Sauvagnac, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Barrachina, M [Junta de la Energia Nuclear, Madrid (Spain)

    1962-07-01

    After describing the preparation of SrSO{sub 4} and BaS0{sub 4} columns, the authors study the following variables affecting fixation of Sr{sup 90}: - influence of pH, of the SO{sub 4}{sup --} concentration in the solution studied, of the column density, of the flow rate, of the use of the EDTA complex. A mechanism is proposed for the exchange and fixation. Once the column characteristics had been chosen, the fixation of rare-earths in the absence or presence of EDTA was studied. - it was observed that for nitrate or chloride concentrations of over 2 mg/ml, or in the presence of stronger than 1 N HNO{sub 3} or HCl, barium was fixed selectively. - these results were applied to radiochemical separations in fission product solutions: Ba{sup 140} and Sr{sup 90} separation, and that of the ceric earth group and the yttric earth group. - In order to establish a complete scheme for the radio-chemical separation in fission product solution, after at least one year ageing, the techniques of column separation and of solvent extraction using thenoyltrifluoroacetone and bis di-ethylhexylphosphoric acid are combined. (authors) [French] Apres avoir decrit la preparation des colonnes de SrS0{sub 4} et BaS0{sub 4}, on etudie les variables suivantes pour la fixation de {sup 90}Sr: - influence du pH, de la concentration en SO{sub 4}{sup --} dans la solution etudiee, de la densite de la colonne, de la vitesse de passage, de l'emploi du complexant EDTA. On propose une explication du mode d'echange et de fixation. Les caracteristiques de la colonne etant choisies, on a etudie la fixation des terres rares en presence ou non de EDTA. - on a d'autre part constate qu'en milieu chlorure ou nitrate, de concentration superieure a 2 mg/ml, ou en presence de HNO{sub 3} ou HCl superieur a 1 N, on fixait selectivement le baryum. - on a applique ces resultats a des separations radiochimiques dans des solutions de produits de fission: separation de {sup 140}Ba, {sup 90}Sr, separation du groupe des

  10. Application of Radiation for the Control of Salmonellae in Various Foods; Destruction des Salmonellae par les Rayonnements dans Divers Produits Alimentaires; Primenenie izluchenij dlya unichtozheniya salmonell v razlichnykh pishchevykh produktakh; Empleo de las Radiaciones Ionizantes en la Lucha Contra las Salmonellae de Diferentes Aumentos

    Energy Technology Data Exchange (ETDEWEB)

    Ley, F. J. [Wantage Research Laboratory (A.E.R.E.), Wantage, Berks. (United Kingdom)

    1966-11-15

    Microbiological studies on the use of ionizing radiation for the elimination of Salmonellae from various foods have demonstrated that a wide variety of factors can influence the radiation sensitivity of the organisms. These factors include the nature of the food itself and the temperature during irradiation, e.g. whether frozen or unfrozen. The difference in resistance of different serotypes of Salmonellae irradiated under the same conditions has also been well established. Dose/survival curves constructed for the purpose of making a choice of dose for a particular application must therefore be established for the practical conditions envisaged and be based on the most resistant serotype present. Since these conditions can never be exactly reproduced in the laboratory, the choice of dose should be confirmed by a substantial amount of work with the naturally-contaminated material. It is apparent that the doses required for the treatment of various foods lie within the' range 0.5 to 1.0 Mrad, achieving a reduction in numbers of initial populations by a factor of between 10{sup 5} and 10{sup 7} . The most promising processes are those considered for frozen and dried-egg products, frozen meats and animal feedingstuffs. (author) [French] A la suite d'etudes microbiologiques sur la possibilite d'employer des rayonnements ionisants pour detruire les Salmonellaedans divers produits alimentaires, il est apparu que la radio- sensibiliteide ces organismes depend de nombreux facteurs, en particulier de la nature du produit et de sa temperature (produit congele ou non) pendant l'irradiation. On a egalement reconnu que diverses varietes serologiques de Salmonellae, irradiees dans les memes conditions, ont une radioresistance differente. Des,courbes de survie en fonction de la dose, construites en vue de determiner la dose necessaire poiir Un traitement' donne, doivent donc etre etablies pour les conditions pratiques envisagees et compte tenu de la plus resistante des varietes

  11. Review of the United States Army Wholesomeness of Irradiated Food Program (1955-1966); Apercu du Programme d'Etudes de l'Armee des Etats Unis sur la Comestibilite des Produits Alimentaires Irradies (1955-1966); Obzor programmy Amerikanskoj armii po voprosu sokhraneniya vkusovykh i pitatel'nykh'kachestv obluchennykh pishchevykh produktov (1955-1966); Programa del Ejercito de Los Estados Unidos Relativo a la Comestibilidad de los Alimentos Irradiados

    Energy Technology Data Exchange (ETDEWEB)

    Raica, N. Jr. [United States Army Medical Research And Nutrition Laboratory, Fitzsimons General Hospital, Denver, CO (United States); Howie, D. L. [United States Army Medical Research and Development Command, Office of the Surgeon General, Washington, DC (United States)

    1966-11-15

    irradiated with {sup 60}Co or with 10-MeV electrons; (d) Irradiated foods are, in general, as acceptable as non-irradiated foods. In the light of these conclusions, the United States Food and Drug Administration has approved irradiation of the following foods: bacon with 4.5 Mrads - {sup 60}Co or 10 MeV electrons; wheat and wheat products with 50 krads - {sup 60}Co; potatoes with 10 krads - 2-MeV electrons. Other petitions are pending or are being prepared. (author) [French] L'Armee des Etats-Unis s'occupe activement de l'execution d'un programme general de recherches sur les nombreuses questions non encore resolues touchant l'utilisation des rayonnements ionisants pour la conservation des produits alimentaires. L'auteur examine dans le present rapport les donnees relatives a la question de la comestibilite (securite toxicologique, nutritive et, en partie, microbiologique) des produits alimentaires irradies. Les etudes a long terme d'alimentation ont ete faites; elles ont demontre que les produits alimentaires irradies sont aussi comestibles, et dans l'ensemble aussi acceptables, que les produits traites selon les procedes classiques. Les donnees ont ete obtenues grace aux travaux de plus de 30 laboratoires universitaires, commerciaux et gouvernementaux et comprennent les resultats d.'experiences sur plus de 15 000 souris, 5000 rats d'une meme souche, 300 chiens et 37 singes, au moyen de 21 produits alimentaires irradies (viandes, poissons, fruits et legumes). En general, les produits alimentaires utilises ont ete irradies a 2,79 et 5,58 Mrad avec un barreau de combustible epuise, des sources au {sup 60}Co ou des sources d'electrons de 10 MeV, et ont ete stockes pendant un minimum de trois mois a la temperature ambiante avant d'etre donnes aux animaux. Des produits alimentaires temoins non irradies ont ete conserves par congelation jusqu'a leur utilisation. Deux especes differentes ont ete nourries'pendant deux-ans avec des aliments contenant 35% (en poids sec) de denrees

  12. Une méthodologie de recommandations produits fondée sur l'actionnabilité et l'intérêt économique des clients

    OpenAIRE

    Piton , Thomas; Blanchard , Julien; Guillet , Fabrice; Briand , Henri

    2011-01-01

    National audience; Dans un contexte économique difficile, la fidélisation des clients figure au premier rang des préoccupations des entreprises. En effet, selon le Gartner, fidéliser des clients existants coûterait beaucoup moins cher que prospecter de nouveaux clients. Pour y parvenir, les entreprises optimisent la marge et le cycle de vie des clients en développant une relation personnalisée aboutissant à demeilleures recommandations. Dans cet article, nous proposons une méthodologie pour l...

  13. Development of Radiation-Sterilized Sea Food Products. I. Enzyme-Inactivated Cod and Halibut Patties; Essais de Radiosterilisation des Produits Alimentaires d'Origine Marine. I. Pates de Morue et de Fletan a Enzymes Inactives; Primenenie izlucheniya dlya sterilizatsii morskikh pishchevykh produktov; Preparacion de Alimentos de Origen Marino Esterilizados por Irradiacion. I. Pastelillos de Bacalao y de Hipogloso con Enzimas Inactivadas

    Energy Technology Data Exchange (ETDEWEB)

    Sinnhuber, R. O.; Landers, Mary K.; Yu, T. C. [Department of Food Science And Technology, Oregon State University, Corvallis, OR (United States); Simon, M.; Heiligman, F. [United States Army Natick Laboratories, Natick, MA (United States)

    1966-11-15

    ont ete inactives par Inverted-Exclamation-Mark immersion des saucisses dans un bain d'eau bouillante. Apres refroidissement pour laisser prendre les proteines, les saucisses ont ete debitees en tranches de 1 cm d'epaisseur, puis mises en boites et irradiees a 4,5 Mrad. Le produit radiosterilise a ete emmagasine pendant 12 mois a une temperature de 22 Degree-Sign C; il- a ete procede periodiquement a une evaluation de la qualite et de l'effet des divers traitements. Ces traitements comportaient l'emballage sous vide, l'addition de divers anti-oxydants et l'emploi de paquets de charbon de bois. Pour la consommation, les produits ont ete trempes dans de la pate a frire, roules dans de la chapelure et passes a la friture. Le produit a ete evalue par des groupes de degustateurs; on a egalement fait des mesures objectives sur le total des bases volatiles, l'indice d'acide 2-thiobarbiturique, le pH et le coefficient de reflexion des couleurs. Les groupes de degustateurs (composes de 140 a 170 membres) ont donne des cotes satisfaisantes aux produits pendant 12 mois de stockage a 22 Degree-Sign C. Bien que ces groupes aient prefere les echantillons temoins non irradies aux echantillons irradies, apres 12 mois, tous les pates irradies conserves ont ete classes du cote positif de l'echelle hedonistique des qualites (neuf degres). Le coefficient de reflexion des couleurs des produits alimentaires d'origine marine radiosterilises peut servir a evaluer le brunissement produit par l'action des rayonnements et parait etre en rapport avec la duree de conservation. (author) [Spanish] Se han preparado pastelillos o tortas de bacalao (Gadus macrocephalus) e hipogloso (Hippoglossus stenolepsis) esterilizados por irradiacion, con inactivacion de enzimas, productos que ofrecen interes desde el punto de vista comercial. Se prepararon mezclando el pescado picado con harina de maiz, gelatina y sal y dando a la masa forma de salchicha. Las enzimas se inactivaron calentando las salchichas en un

  14. Étude des motivations et des attentes des touristes chinois en séjour à Chiang Mai, Thaïlande: Proposition d’amélioration des produits et services pour l’hôtel «Swiss-Lanna Lodge»

    OpenAIRE

    Kucina, André; Broccard, Manu

    2016-01-01

    L’objectif de ce travail est d’apporter des pistes d’amélioration au Swiss-Lanna Lodge, établissement hôtelier deux étoiles sis à Chiang Mai, Thaïlande. Ceci dans le but de mieux répondre aux attentes des hôtes chinois afin de les fidéliser et augmenter cette part de marché. Des statistiques liées au Swiss-Lanna Lodge ont été réalisées, permettant ainsi de définir les enjeux liés à l’établissement. Une étude du marché émetteur chinois à été conduite ainsi que le profil interculturel de la...

  15. Vitrification of NORM wastes

    International Nuclear Information System (INIS)

    Chapman, C.

    1994-05-01

    Vitrification of wastes is a relatively new application of none of man's oldest manufacturing processes. During the past 25 years it has been developed and accepted internationally for immobilizing the most highly radioactive wastes from spent nuclear fuel. By the year 2005, there will be nine operating high-level radioactive vitrification plants. Many of the technical ''lessons learned'' from this international program can be applied to much less hazardous materials such as naturally occurring radioactive material (NORM). With the deployment of low capital and operating cost systems, vitrification should become a broadly applied process for treating a large variety of wastes. In many situations, the wastes can be transformed into marketable products. This paper will present a general description of waste vitrification, summarize some of its key advantages, provide some test data for a small sample of one NORM, and suggest how this process may be applied to NORM

  16. Vitrification melter study

    International Nuclear Information System (INIS)

    Jones, J.A.

    1995-04-01

    This report presents the results of a study performed to identify the most promising vitrification melter technologies that the Department of Energy (EM-50) might pursue with available funding. The primary focus was on plasma arc systems and graphite arc melters. The study was also intended to assist EM-50 in evaluating competing technologies, formulating effective technology strategy, developing focused technology development projects, and directing the work of contractors involved in vitrification melter development

  17. Les cultures transgéniques permettent-elles de réduire l’usage des produits phytosanitaires ? Considérations à partir du cas du soja tolérant au glyphosate

    Directory of Open Access Journals (Sweden)

    Bonny Sylvie

    2004-03-01

    Full Text Available L’article s’interroge sur l’impact des cultures transgéniques sur l’emploi des pesticides, objet de nombreux débats. Sont examinés les résultats de plusieurs études portant sur le bilan des premières années d’utilisation à grande échelle des OGM aux États-Unis, plus particulièrement du soja tolérant au glyphosate. Les travaux analysés présentent des résultats variables, surtout pour les années récentes, selon les méthodes choisies et le type d’extrapolations faites. Divers facteurs expliquant l’accroissement de l’emploi global du glyphosate sont passés en revue. Mais l’estimation des quantités d’herbicides utilisées qui dépendent de nombreux facteurs n’est pas un indicateur valide de l’impact des cultures transgéniques sur l’environnement.

  18. Metabolism of fission products in man: Marshallese experience; Metabolisme des produits de fission radioactifs chez l'homme: donnees recueillies aux iles Marshall; Metabolizm radioaktivnykh produktov deleniya v organizme cheloveka. (dannye obsledovaniya zhite- lej marshal'skikh ostrovov); Metabolismo de productos de fision radiactivos en el hombre: datos obtenidos en los habitantes de las islas Marshall

    Energy Technology Data Exchange (ETDEWEB)

    Cohn, S. H. [Brookhaven National Laboratory, Upton, Long Island, NY (United States)

    1963-02-15

    The medical study of the Marshallese accidentally exposed to local fall-out in 1954 is unique in that; along with he Japanese fishermen study, it provides the only data existing on the metabolism of mixed fission products in a human population. Early diagnosis of the internal radioactive contamination was made by radiochemical analysis of the excreta of the exposed people and by radiochemical analysis of the tissues of animals simultaneously exposed. Initially, Sr{sup 89}, Ba{sup 140}, I{sup 131} and its shorter-lived daughters and a number of rare-earth elements contributed the major portion of the internal radiation dose. After a year, the principal radioisotopes were Sr{sup 90}, Cs{sup 137} and Zn{sup 65}. Subsequently these radionuclides and more recently, Co{sup 60}, have been measured periodically. Since 1958, the {gamma}-spectra of a number of Marshallese have been obtained with a portable whole-body counter. The report discusses the findings of these studies for the past eight years. The results of an early attempt o alter the rate of removal of the mixed fission products in the Marshallese with calcium disodium EDTA are presented. The metabolism of die radionuclides and their relationship to levels present in the environment is also discussed. (author) [French] L'enquete medicale a laquelle ont ete soumis les habitants des iles Marshall qui, en 1954, ont ete exposes accidentellement a des retombees locales presente un caractere unique en ce sens que, tout comme l'enquete sur les pecheurs japonais, elle fournit les seules donnees que l'on possede sur le metabolisme d'un melange de produits de fission chez l'homme. Un premier diagnostic de la contamination radioactive interne a ete fait par analyse radiochimique des excreta des sujets exposes et par analyse radiochimique des tissus des animaux exposes simultanement. Au debut, {sup 89}Sr, {sup 140}Ba, {sup 131}I et leurs produits de filiation de courte periode,ainsi qu'un certain nombre de terres rares

  19. Recent Advances in Food Irradiation Research in Japan; Recents Progres de l'Irradiation des Produits Alimentaires au Japon; Poslednie dostizheniya v issledovaniyakh po oblucheniyu produktov pitaniya v Yaponii; Progresos Recientes de las Investigaciones Sobre Irradiacion de Alimentos Realizadas en el Japon

    Energy Technology Data Exchange (ETDEWEB)

    Matsuyama, A. [Laboratory of Radiation Biology, Institute of Physical and Chemical Research, Honkomagome, Bunkyo-Ku, Tokyo (Japan)

    1966-11-15

    .5 to 0.7 Mrad to improve quality and the yield of extracted agar and the radiation acceleration of the ageing of alcoholic beverages, particularly distilled liquors, with doses of up to 0.5 Mrad. Besides these practical investigations, extensive work has been conducted with the fundamental aspects, including the radiosensitization of microorganisms, enzyme inactivation by radiation, and other subjects in radiation chemistry associated with food irradiation. (author) [French] Actuellement, l'organisation du programme national d'irradiation de produits alimentaires semble se preciser, l'interet se portant a la fois sur les problemes fondamentaux et les questions pratiques. La Commission de l'energie atomique s'occupe activement d'elaborer le programme d'etudes et de realisations qui sera mis en oeuvre vraisemblablement en 1967. La collaboration des chercheurs dans ce domaine a abouti a la creation de l'Association japonaise de recherches sur l'irradiation des denrees alimentaires, organisme qui est appele a jouer un role important dans le developpement du programme national. Le Japon dispose actuellement de quelque 30 sources de radioisotopes de l'ordre du kCi et d'autant de generateurs d'electrons, y compris quelques installations experimentales. Les etudes pratiques sur l'irradiation de denrees alimentaires au Japon sont orientees dans trois directions. Premierement, la radioconservation, qui beneficie de l'effort principal. L'inhibition de la germination des pommes de terre, des oignons et des patates, la desinsection du riz, du ble et de leurs derives, et le traitement a faible dose (moins de 0,5 Mrad) en emballages sous vide du poisson et des crustaces et mollusques ainsi que de quelques fruits tels que la fraise et l'orange sont autant d'exemples des possibilites d'utilisation des rayonnements. L'irradiation du riz a permis de faire une observation interessante, a savoir qu'a la suite d'une irradiation de desinsection a des doses comprises entre 5000 et 20 000 rad

  20. Utilisation de produits organiques oxygénés comme carburants et combustibles dans les moteurs. Deuxième partie : Les différentes filières d'obtention des carburols. Analyse technico-économique Using Oxygenated Organic Products As Fuels in Engines. Part Two: Different Systems for Producing Alcohol Fuels. Technico-Economic Analysis

    Directory of Open Access Journals (Sweden)

    Chauvel A.

    2006-11-01

    Full Text Available Parmi les produits à même d'être substitués aux hydrocarbures pour la constitution des carburants, les composés organiques oxygénés occupent une place prépondérante à cause de leurs caractéristiques favorables à la combustion dans les moteurs, qu'ils soient employés purs ou mélangés (seuls ou à plusieurs aux hydrocarbures, constituants des carburants classiques. Dans cet article, ces composés oxygénés sont désignés sous le nom de carburols. Alors que l'objet de la première partie de l'étude a été d'examiner les conséquences techniques de l'emploi de ces produits sur les circuits de distribution et le fonctionnement des véhicules, il s'agit dans la présente partie d'analyser les caractéristiques technico-économiques de leur fabrication. En particulier, on y aborde successivement les points suivants : - disponibilités en matières premières : ressources fossiles et végétales ; - analyse technique des divers modes d'obtention - analyse économique ; - programmes nationaux. Among products that can be substituted for hydrocarbons for producing fuels, oxygenated organic compounds occupy a preponderant position because of their favorable characteristics for combustion in engines whether they are used in a pure form or in mixtures (alone or severally with hydrocarbons which are used to make up conventional fuels. In this article these oxygenated compounds are given the name carburols (alcohol fuels. Whereas the aim of Part 1 was to examine the technical consequences of using such products in distribution circuits and for vehicle operating, Part 2 is an analysis of the technico-economic aspects of manufacturing them. In particular, the following points are taken up successively: (a availabilities of raw materials. fossil and vegetebal resources; (b technical analysis of various production methods; (c economic analysis; (d national programs. Depending on the amounts involved, a distinction is made among alternative

  1. Study of the retention of fission products by a few common minerals. Application to the treatment of medium activity effluents (1962); Etude de la retention des produits de fission par quelques mineraux usuels. Application aux traitements d'effluents de moyenne activite specifique (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J M [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1962-07-01

    The conditions in which strontium is fixed on calcite (the object of the Geneva report P/395 - USA - 1958) are more closely studied and the work is extended to five fission products present in the effluents, and to 17 common rocks and minerals. Although as it turns out this fixation is not suitable as a method of treating the S.T.E. effluents (i.e. those from the Effluent Treatment plant at Marcoule), the study shows that all the crystals considered are strongly contaminated by simple contact with the effluents. (author) [French] Les conditions de fixation du strontium sur la calcite (objet du rapport de Geneve P/395 - USA - 1958) sont approfondies et l'etude est etendue aux cinq produits de fission presents dans les effluents et a 17 roches et minerais courants. Bien qu'en definitive cette fixation se revele inutilisable comme procede de traitement d'effluents S.T.E. (Station de Traitement des Effluents, Marcoule), l'etude montre que tous les cristaux consideres se contaminent fortement par simple contact avec les effluents. (auteur)

  2. Analyse des caractéristiques structurelles et des performances ...

    African Journals Online (AJOL)

    SARAH

    28 févr. 2014 ... performances technico-économiques de la riziculture irriguée en Côte d' .... en nous basant sur les prix des intrants et des produits en vigueur au cours ..... la recherche et de la vulgarisation et le transfert de technologies ; (2) ...

  3. Culture du bambou : diversification des moyens de subsistance des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Culture du bambou : diversification des moyens de subsistance des petits producteurs de tabac du sud de la province de Nyanza, au Kenya - phase II. Au cours de la première phase du projet (projet no 103765), les chercheurs ont effectué une analyse de marché pour le bambou et les produits du bambou, comparé les ...

  4. Development of a machine for sorting laundry according to its radioactive contamination (1962); Conception et mise en oeuvre d'une machine a trier le linge en fonction de sa contamination par des produits radioactifs (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Cohendy, G; Alles, M; Pellerin, A [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1962-07-01

    A the Marcoule Plutonium Production Centre special clothing is worn, in the active zones. A large fraction of these clothes is contaminated and must therefore be subjected to specialised treatments during washing in order to be reintroduced subsequently without danger. Because of the large amount of clothes to be treated it has become necessary to install a special semi-automatic machine; the role of the operator is limited to placing the clothing in the machine and to removing the baskets of sorted clothes. The machine itself has been designed and built by the Mechanics Section. The Radiation Protection Service chose the sorting method which is based on {beta} radiation and uses Geiger counters actuating an appropriate electronic system; the Service also developed this system, depending on the various degrees of contamination of the treated clothing. (authors) [French] Le Centre de Production de Plutonium de Marcoule utilise des vetements speciaux pour travailler dans les zones actives. Une proportion importante de ces vetements se contamine et doit, de ce fait, subir des traitements appropries au cours du lavage, de facon a pouvoir etre reintroduits sans danger dans le circuit d'utilisation. Devant l'importance des quantites a traiter, il est apparu necessaire de mettre en place une machine speciale, semi-automatique; le role de l'operateur, consiste en effet uniquement a introduire le linge dans la machine et a extraire de celle-ci les paniers de linge trie. La Section de Mecanique a concu et realise la machine proprement dite. Le Service de Protection contre les Radiations a choisi le mode de tri qui s'effectue en {beta} a l'aide de compteurs Geiger actionnant une electronique appropriee et a assure la mise au point de cette electronique, en fonction des divers degres de contamination du linge a trier. (auteurs)

  5. Wholesomeness and Public Health Research in the United States Atomic Energy Commission Food Irradiation Programme; Recherches sur la Comestibilite et la Sante Publique au Titre du Programme d'Irradiation des Produits Alimentaires de la Commission de l'Energie Atomique des Etats-Unis; Issledovaniya bezvrednosti obluchennykh pishchevykh produktov i svyazannykh s nimi problem zdravookhraneniya po programme komissii po atomnoj ehnergii ssha v oblasti oblucheniya pishchevykh produktov; Programa de Irradiacion de Alimentos de la Comision de Energia Atomica de los Estados Unidos: Investigaciones Sobre Comestibilidad u Sanidad Publica

    Energy Technology Data Exchange (ETDEWEB)

    Whitehair, L. A. [Division of Biology and Medicine, United States Atomic Energy Commission, Washington, DC (United States)

    1966-11-15

    have indicated that the general outlook for wholesomeness of irradiated foods is favourable. Toxicity evaluations are currently being initiated on bananas, mangoes and papayas. Research efforts on Clostridium botulinum, Types E and F, Salmonellae and other potentially pathogenic organisms will continue. (author) [French] Afin de determiner le degre de securite biologique des produits alimentaires qui presentent un interet pour le programme de la Commission de l'energie atomique relatif aux produits alimentaires irradies, la Division de biologie et medecine de la Commission a organise des recherches depuis 1961. Des etudes ont ete entreprises sur la comestibilite, la microbiologie et la biochimie en vue de completer les donnees fournies par les travaux dans les domaines des realisations, de l'economie et de la technique organises par la Division des isotopes de la Commission. Lorsque les resultats obtenus semblent applicables a des produits alimentaires particuliers irradies a faible dose, des etudes sont entreprises pour fournir les donnees pertinentes requises par le service de controle des produits alimentaires et pharmaceutiques des Etats-Unis avant que des decisions definitives soient prises concernant les demandes visant a autoriser la consommation illimitee d'un produit par le public. Ce programme comprenait des etudes de toxicite sur plusieurs especes d'animaux soumis a des regimes alimentaires comprenant jusqu'a 35% (en matiere solide seche) du produit alimentaire irradie considere. Des recherches d'une duree de deux ans sur des animaux (rats, chiens et poulets) fournissent des donnees sur la consommation alimentaire, la croissance, les enzymes, l'hematologie, la pathologie generale et l'histo- pathologie. Des etudes a court terme, aux fins de confirmation, sur deux especes animales (rats et chiens) sont faites dans certains cas lorsque le produit alimentaire irradie considere a suffisamment de points communs avec des produits qui ont precedemment fait l

  6. Problems to be Expected in Disposing of Fission Products from a Possible Nuclear Power Programme; Problemes Eventuels d'Elimination des Produits de Fission dans les Futures Centrales Nucleaires; 0412 0415 0420 041e 042f 0414 ; Problemas que Puede Plantear la Evacuacion de Productos de Fision Resultantes de la Ejecucion de un Programa de Produccion de Energia de Origen Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, G. K. [Cenral Technical Services, Engineering and Development Group, United Kingdom Atomic Energy Authority, Risley (United Kingdom)

    1960-07-01

    typical British nuclear power programme covering the next few decades is examined. The types of reactor to be erected and the types of fuel to be initially used in them are well appreciated but of course the author's conclusions will necessarily become less certain with the passage of time. The chemical processes which must be applied to irradiated fuels will depend on the type of fuel, its burn-up etc., and so will change during the period under review. Consideration is therefore given to the quantities of fission products and heavy isotopes which may be produced, the forms in which they may leave the chemical processing streams and the methods available for handling them safely, either by storage or by disposal. (author) [French] L'auteur examine un programme d'energie nucleaire caracteristique pour la Grande-Bretagne et s'etendant sur les prochaines decennies. Il donne une evaluation fort judicieuse des types de reacteurs dont la construction est envisagee et des genres de combustibles qu'il est question d'y utiliser pendant la periode initiale; toutefois, ses conclusions auront avec le temps de moins en moins de valeur. En effet, le traitement chimique auquel on devra soumettre le combustible irradie depend du genre de ce dernier, de son taux de combustion, etc.; il subira inevitablement des modifications au cours de la periode consideree. L'auteur tient donc compte des quantites de produits fissiles et d'isotopes lourds qu'il sera possible de produire, des formes sous lesquelles ils pourront se presenter a la fin du traitement chimique et des methodes existantes permettant d'assurer leur manipulation sans danger en vue de leur stockage ou de leur elimination. (author) [Spanish] Esta memoria estudia un programa britanico caracteristico de produccion de energia nuclear que cubre las proximas decadas. Se sabe con bastante certeza que tipos de reactores se construiran y el tipo de combustible que se empleara en ellos en un principio, pero estos conocimientos son

  7. Emballage naturel de produits biologiques

    NARCIS (Netherlands)

    Thoden van Velzen, E.U.

    2011-01-01

    Les emballages en plastique, renouvelables et biodégradables, sont-ils vraiment écologiques? Pour les entreprises d’emballage, il est difficile d’y trouver la réponse et donc de faire des choix réfléchis. Dans l’analyse ‘Emballage naturel’ le maximum de données a été collectionné et résumé.

  8. Vitrification of reactor wastes

    International Nuclear Information System (INIS)

    Jouan, A.

    1993-01-01

    The vitrification of low and intermediate level wastes from the NPP operation has been studied in the frame of a Franco-Czech agreement. The laboratory experiments concentrated on a search for a suitable borosilicate glass matrix which could incorporate relatively high quantities of boron and sodium, main components of liquid wastes from the WWER reactor type NPPs. A relatively wide area of waste compositions has been studied and properties of glasses suitable for the technology and waste disposal were measured. Great attention has been paid to the chemical stability (leachability), other properties like thermal dependence of viscosity and electrical conductivity of melts, and the microstructure of the final solidification product have also been evaluated. The feasibility of the vitrification process has been proved during pilot plant tests which were accomplished at the French establishment in Marcoule. The results of tests were promising. (authors). 4 tabs., 7 figs

  9. Vitrification of reactor wastes

    Energy Technology Data Exchange (ETDEWEB)

    Jouan, A [CEA Centre d` Etudes de la Vallee du Rhone, 30 - Marcoule (France). Dept. des Procedes de Retraitement; Sussmilch, J [Nuclear Research Institut, Rez (Czech Republic)

    1994-12-31

    The vitrification of low and intermediate level wastes from the NPP operation has been studied in the frame of a Franco-Czech agreement. The laboratory experiments concentrated on a search for a suitable borosilicate glass matrix which could incorporate relatively high quantities of boron and sodium, main components of liquid wastes from the WWER reactor type NPPs. A relatively wide area of waste compositions has been studied and properties of glasses suitable for the technology and waste disposal were measured. Great attention has been paid to the chemical stability (leachability), other properties like thermal dependence of viscosity and electrical conductivity of melts, and the microstructure of the final solidification product have also been evaluated. The feasibility of the vitrification process has been proved during pilot plant tests which were accomplished at the French establishment in Marcoule. The results of tests were promising. (authors). 4 tabs., 7 figs.

  10. Hanford Waste Vitrification Plant

    International Nuclear Information System (INIS)

    Larson, D.E.; Allen, C.R.; Kruger, O.L.; Weber, E.T.

    1991-10-01

    The Hanford Waste Vitrification Plant (HWVP) is being designed to immobilize pretreated Hanford high-level waste and transuranic waste in borosilicate glass contained in stainless steel canisters. Testing is being conducted in the HWVP Technology Development Project to ensure that adapted technologies are applicable to the candidate Hanford wastes and to generate information for waste form qualification. Empirical modeling is being conducted to define a glass composition range consistent with process and waste form qualification requirements. Laboratory studies are conducted to determine process stream properties, characterize the redox chemistry of the melter feed as a basis for controlling melt foaming and evaluate zeolite sorption materials for process waste treatment. Pilot-scale tests have been performed with simulated melter feed to access filtration for solids removal from process wastes, evaluate vitrification process performance and assess offgas equipment performance. Process equipment construction materials are being selected based on literature review, corrosion testing, and performance in pilot-scale testing. 3 figs., 6 tabs

  11. Release of Fission Products from UC-ZrC Fuel Inserts; Degagement des produits de fission liberes dans des noyaux combustibles UC-ZrC; Vydelenie produktov deleniya iz topliv UC - ZrC; Liberacion de productos de fision por pastillas de combustible de UC-ZrC

    Energy Technology Data Exchange (ETDEWEB)

    Barth, F.; Von der Decken, C. B.; Schifferstein, K. [Brown Boveri/Krupp Reaktorbau G.M.B.H., Duesseldorf (Germany); Clauss, A.; Reichel, H.; Rygaert, J.; Ruston, W. R. [Societe d' Etudes de Recherches et d' Applications pour l' Industrie (S.E.R.A.I.), Brussels (Belgium)

    1963-11-15

    energies obtained from different types of pellets, although the values of D/r{sub 0}{sup 2} sometimes differed by four orders of magnitude at the same sample temperatures. After irradiation, the activities of the isotopes I{sup 131}, Sr{sup 85}, Ba{sup 140} and Ce{sup 141} were determined in the graphite of the capsules. Except for I{sup 131}, the activities were higher than those expected for a release by recoil only. The values for Sr{sup 89}, Ba{sup 140} and Ce{sup 141} are too high to be a result of a diffusion of their corresponding rare gas precursors. It is assumed that the measured isotopes or their non-rare gas precursors were released by diffusion. (author) [French] Les auteurs ont etudie sous irradiation, dans une boucle, le degagement des produits de fission liberes par des pastilles dont la composition approximative etait UC + 20 ZrC. Il s'agissait de verifier la possibilite d'utiliser ces pastilles comme noyaux d'elements combustibles spheriques pour le reacteur a haute temperature actuellement construit a Juliers par la societe Brown-Boveri/Krupp Reaktorbau GmbH. Les essais ont ete faits sur des pastilles encapsulees dans du graphite et sur des pastilles non encapsulees. La surface de certaines pastilles etait constituee par une couche de carbure de zirconium pur d'une epaisseur de 1 a 2 mm. Les echantillons ent ete places dans des fours electriques a resistance pouvant atteindre une temperature de 1600{sup o}C. Pendant l'irradiation, les flux de neutrons etaient de 3 a 4 x 10{sup 10}n/cm{sup 2}s. La boucle permettait de mesurer, pendant l'irradiation, le degagement de {sup 85m}Kr, {sup 87}Kr, {sup 88}Kr, {sup 133}Xe et {sup 135}Xe et de determiner indirectement les quantites de {sup 133}I et {sup 135}I, apres l'arret du reacteur. Le degagement minimum de {sup 131}I, {sup 89}Sr, {sup 140}Ba et {sup 141}Ce a ete determine radiochimiquement apres retrait des echantillons. Il a ete egalement possible de mesurer la fraction de recul {epsilon}{sub R} seule, le

  12. Combien coûte l’électricité produite par le photovoltaïque (PV) en Suisse ?: situation, analyse des coûts détaillée et comparaison avec l’Allemagne

    OpenAIRE

    Monnet, David; Briguet, Alain

    2015-01-01

    Le but de ce travail est d’évaluer la rentabilité et le potentiel des installations photovoltaïques afin de voir si cette technologie peut remplacer le nucléaire en Suisse. Après avoir présenté les concepts de bases relatifs à l’énergie électrique d’origine solaire, j’ai détaillé la situation suisse et introduit brièvement la situation allemande afin d’observer les différences entre les deux pays. Les alternatives aux nucléaires ainsi que leurs potentiels en Suisse ont également été exposés. ...

  13. Forecasting the Quantity and Activity of Fission Products in France in Future Years in the Light of Atomic Energy Development; Quantite et Activite des Produits de Fission Obtenus en France dans les Annees a Venir Compte Tenu du Developpement de l'Energie Atomique; 041a 041e 041b 0414 ; Cantidad y Actividad de los Productos de Fision que se Obtendran en Francia en los Anos Venideros, Habida Cuenta del Desarrollo de la Energia Atomica

    Energy Technology Data Exchange (ETDEWEB)

    Guirlet, J.; Lavie, J. M. [Commissariat a l' Energie Atomique, Saclay (France)

    1960-07-01

    With the aid of Wigner and Way's formula it is possible to predict theoretically the activity of the complex mixture of fission products originating in a reactor. Account is taken in the study of prospective nuclear power production in France up to 1975. It is assumed that the uranium stays in the reactor for periods of three and of six months. It is also possible to determine the activity of a given fission product and to calculate its decay time. The substance selected was strontium for an activation period of three months. Each group of curves shows total activity at any moment and the activity of particular fission products over a given period. (author) [French] En utilisant la formule de Wigner et Way, il est possible de prevoir theoriquement l'activite du melange complexe de produits de fission provenant d'une pile. L'etude a ete faite en tenant compte de previsions en ce qui concerne en France la production d'electricite d'origine atomique jusqu'en 1975. On a suppose des temps de sejour en pile de l'uranium de trois mois et de six mois. Il est possible egalement de trouver l'activite d'un produit de fission particulier, et de donner sa decroissance. Le corps choisi est le strontium pour un temps d'activation de trois mois. Chaque ensemble de courbes donne a tout instant l'activite totale, et l'activite propre des produits de fission correspondant a une periode donnee. (author) [Spanish] Empleando la formula de Wigner y Way se puede calcular teoricamente la actividad de la mezcla compleja de productos de fision procedentes de una pila. Para esta memoria se han tenido en cuenta las previsiones de produccion de electricidad nucleoelectrica en Francia hasta 1975. Los autores suponen que el uranio permanece tres o seis meses en la pila y han conseguido determinar la actividad de un producto de fision determinado, asi como su periodo de desintegracion. Han escogido el estroncio, con un tiempo de activacion de 3 meses. Cada conjunto de curvas da la actividad total

  14. Vitrification publication bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Schmieman, E.; Johns, W.E.

    1996-02-01

    This document was compiled by a group of about 12 graduate students in the Department of Mechanical Engineering and Material Science at Washington State University and was funded by the U.S. Department of Energy. The literature search resulting in the compilation of this bibliography was designed to be an exhaustive search for research and development work involving the vitrification of mixed wastes, published by domestic and foreign researchers, primarily during 1989-1994. The search techniques were dominated by electronic methods and this bibliography is also available in electronic format, Windows Reference Manager.

  15. Vitrification publication bibliography

    International Nuclear Information System (INIS)

    Schmieman, E.; Johns, W.E.

    1996-02-01

    This document was compiled by a group of about 12 graduate students in the Department of Mechanical Engineering and Material Science at Washington State University and was funded by the U.S. Department of Energy. The literature search resulting in the compilation of this bibliography was designed to be an exhaustive search for research and development work involving the vitrification of mixed wastes, published by domestic and foreign researchers, primarily during 1989-1994. The search techniques were dominated by electronic methods and this bibliography is also available in electronic format, Windows Reference Manager

  16. Recovery of Waterflood Residual Oil Using Alkali, Surfactant and Polymer Slugs in Radial Cores Récupération d'huile résiduelle par injection d'eau améliorée de produits alcalins, de tensio-actifs et de polymères dans des carottes radiales

    Directory of Open Access Journals (Sweden)

    Nasr-El-Din H. A.

    2006-11-01

    Full Text Available An experimental study has been conducted to examine mobilization and recovery of waterflood residual oil in radial cores. Alkali, surfactant, and polymer slugs of various compositions, sizes and sequences were tested. Core flood experiments were conducted with unfired radial Berea sandstone disks at a flow rate of 8 cm3/h. David Lloydminster crude oil (total acid number of 0. 45 mg KOH/g oil was used. The results of the present work showed that the composition and sequence of the injected chemical slug play an important role in mobilization and recovery of residual oil. For slugs lacking either mobility control, or low interfacial tension, no oil bank was formed and tertiary oil recovery was less than 20% Sor. A significant oil bank and tertiary oil recovery up to 70 % Sor were obtained with slugs having mobility control and low interfacial tension. However, maximum oil cut, incre-mental oil recovery and surfactant propagation were found to be functions of the alkali content in the slug. The incremental oil recovery, oil cut and slug injectivity greatly improved as the alkali concentration (sodium carbonate in the combined slug was increased. A slight delay in surfactant breakthrough and a significantly slower rate of surfactant propagation were observed at higher sodium carbonate concentrations. Une étude expérimentale ayant pour but d'examiner la mobilisation et la récupération assistée d'huile résiduelle, à la suite d'un déplacement par l'eau en milieu poreux, a été conduite. Des bouchons de produit alcalin, de surfactant et de polymère, ayant des compositions, grosseurs et séquences d'injection variées, furent essayés. Les déplacements en milieu poreux furent conduits en utilisant des carottes de grès berea (non traités à haute température et un débit de 8,0 cm3/h. Pour ce faire, on utilisa de l'huile de David Lloydminster (ayant un nombre acide de 0,45 mg KOH/g d'huile. Les résultats de ce travail ont démontré que la

  17. Reactions of Hot Hydrogen Atoms with Ethylene. The Role of Excited Ethyl Radicals as Intermediate Products; Reactions des Atomes Chauds d'Hydrogene avec l'Ethylene. Le Role des Radicaux Ethyle Excites Comme Produits Intermediaires; Reaktsiya goryachikh atomov vodoroda s ehtilenom. Rol' vozbuzhdennykh ehtil'nykh radikalov kak promezhutochnykh produktov; Reacciones de Atomos Calientes de Hidrogeno con Etileno Papel de los Radicales Etilicos Excitados como Productos Intermedios

    Energy Technology Data Exchange (ETDEWEB)

    Dzantiev, B. G.; Shvedchikov, A. P. [Institut Himicheskoj Fiziki AN SSSR, SSSR (Russian Federation)

    1965-04-15

    } (n, {alpha})T (E{sub sep} = 2,7 MeV); radiolyse (E Tilde-Operator plusieurs eV); photolyse (E Tilde-Operator 1 a 1,5 eV; le tritium se forme par photolyse a partir de H1 pour {lambda} = 2537A). Pour obtenir des atomes de tritium, on a utilise comme cibles des cristaux et des films de Li{sub 2}Co{sub 3}, Li{sup 6}F, Li{sup 6}OH, Li{sup 6}BO{sub 2} * 8H{sub 2}. On a irradie de l'ethylene en phase gazeuse (sous une pression p de 5 a 10 atm) et des melanges de ce corps avec l'ammoniac, l'helium et des inhibiteurs. L'irradiation a eu lieu a l'interieur d'un reacteur du type IRT-1000 dans un flux de neutrons thermiques de 10{sup 11} a 101{sup 12} n/cm{sup 2} * s. Les composes marques au tritium et les produits des reactions radiochimiques ont ete determines par voie de chromatographie gazeuse a l'aide de deux detecteurs montes en serie (un ' catharometre' et un compteur Geiger a balayage continu). Les auteurs montrent que dans l'ethylene irradie, la gamme des produits marques se distingue sensiblement de celle des produits non marques, Les principaux produits non marques sont; C{sub 2}H{sub 2}, C{sub 2}H{sub 6}, C{sub 4}H{sub 10} et des carbures a plus de quatre atomes d'hydrogene, le rendement en H2 etant faible. Les principaux produits marques sont; HT, C{sub 2}H{sub 3}T et C{sub 4}H{sub 9}T, le rendement en C{sub 2}H{sub 5}T et surtout en C{sub 2}HT etant negligeable. Le rendement en composes marques depend des substances ajoutees a l'ethylene (ammoniac, helium, iode), du compose contenant du lithium et de la structure de la cible. En ramenant la temperature de 50 Degree-Sign C to -78 Degree-Sign C, on ne modifie que faiblement la repartition des produits marques; cependant, lors du passage de l'ethylene a l'etat solide (-196 Degree-Sign C), on observe un effet de phase; la production de HT et C{sub 4}H{sub 9}T diminue, alors que l'activite de l'ethylene C{sub 2}H{sub 3}T augmente. Les auteurs montrent que lors de la radiolyse de C{sub 2}H{sub 4} et des melanges de ce

  18. Economic Aspects of the Food Irradiation Programme in Israel; Aspects Economiques du Programme d'Irradiation des Produits Alimentaires en Israel; Ehkonomicheskie aspekty izrail'skoj programmy po oblucheniyu pishchevykh produktov; Aspectos Economicos del Programa de Irradiacion de Alimentos de Israel

    Energy Technology Data Exchange (ETDEWEB)

    Lapidot, M.; Foa, E.; Sivan, Y.; Kahan, R. S. [Soreq Nuclear Research Centre, Yavne (Israel)

    1966-11-15

    and onions will help considerably in the rapid adoption of the irradiation technique owing to the clear advantages shown. (author) [French] L'economie de nombreux pays en voie de developpement repose sur l'agriculture, les fruits semi-tropicaux constituant la production essentielle. La recolte et la duree de conservation sont tres breves a cause du climat chaud et humide. Le stockage sous refrigeration est insuffisant ou tres onereux. Les marches ayant une importance economique sont eloignes. Avant d'etudier serieusement la possibilite technique de recourir a l'irradiation, il faut examiner les aspects economiques nationaux de ce procede de traitement des produits alimentaires. Il faut ensuite proceder a des etudes economiques detaillees sur les possibilites de realisation, a mesure que le programme se developpe. Cette enquete technico-economique sur les produits agricoles irradies a ete entreprise en Israeel en juillet 1965. Tous les articles susceptibles de profiter de l'irradiation (fruits et legumes, fourrage, cereales et derives, poisson, viande, volaille et derives) ont ete examines. On a tenu compte du volume des recoltes et des prix correspondant aux campagnes 1962/63 et 1968/69 (d'apres les donnees fournies par le Ministere de l'agriculture). Les frais d'irradiation ont ete evalues d'apres les donnees disponibles et leur extrapolation, pour de petits irradiateurs dans les regions productrices et pour de grands irradiateurs dans les ports et le long des principaux axes routiers. Le traitement superficiel par des accelerateurs d'electrons et le traitement en vrac avec {sup 60}Co, {sup 137}Cs ou par les rayons X ont ete consideres. Cette etude a ete utile a l'etablissement du programme d'etudes technologiques detaillees et d'etudes de rentabilite pour certains articles, et a l'elaboration des previsions concernant les activites de recherche et les applications commerciales jusqu'en 1971. Des resultats preliminaires, notamment l'arret de la germination des pommes

  19. Environmental Management vitrification activities

    Energy Technology Data Exchange (ETDEWEB)

    Krumrine, P.H. [Waste Policy Institute, Gaithersburg, MD (United States)

    1996-05-01

    Both the Mixed Waste and Landfill Stabilization Focus Areas as part of the Office of Technology Development efforts within the Department of Energy`s (DOE) Environmental Management (EM) Division have been developing various vitrification technologies as a treatment approach for the large quantities of transuranic (TRU), TRU mixed and Mixed Low Level Wastes that are stored in either landfills or above ground storage facilities. The technologies being developed include joule heated, plasma torch, plasma arc, induction, microwave, combustion, molten metal, and in situ methods. There are related efforts going into development glass, ceramic, and slag waste form windows of opportunity for the diverse quantities of heterogeneous wastes needing treatment. These studies look at both processing parameters, and long term performance parameters as a function of composition to assure that developed technologies have the right chemistry for success.

  20. Environmental Management vitrification activities

    International Nuclear Information System (INIS)

    Krumrine, P.H.

    1996-01-01

    Both the Mixed Waste and Landfill Stabilization Focus Areas as part of the Office of Technology Development efforts within the Department of Energy's (DOE) Environmental Management (EM) Division have been developing various vitrification technologies as a treatment approach for the large quantities of transuranic (TRU), TRU mixed and Mixed Low Level Wastes that are stored in either landfills or above ground storage facilities. The technologies being developed include joule heated, plasma torch, plasma arc, induction, microwave, combustion, molten metal, and in situ methods. There are related efforts going into development glass, ceramic, and slag waste form windows of opportunity for the diverse quantities of heterogeneous wastes needing treatment. These studies look at both processing parameters, and long term performance parameters as a function of composition to assure that developed technologies have the right chemistry for success

  1. Oxydation des huiles de bases minérales d'origine pétrolière. Relation entre leur composition chimique, l'épaississement et la composition de leur produits de dégradation Oxidation of Mineral Base Stocks of Petroleum Origin. Relationship Between Chemical Composition, Thickening and Oxidized Degradation Products

    Directory of Open Access Journals (Sweden)

    Faure D.

    2006-11-01

    Full Text Available Cette étude est basée sur la compréhension des problèmes liés à l'oxydation à haute température des huiles de base utilisées dans la formulation des lubrifiants pour moteurs automobiles. Les huiles étudiées sont d'origines différentes : huile Moyen-Orient et huile mer du Nord, respectivement à fortes et faibles teneurs en composés aromatiques et en soufre, huile hydroisomérisée et polyalphaoléfine, exemptes de ces composés, et huile hydrocraquée de composition intermédiaire. L'influence de la teneur et de la composition en produits aromatiques et en soufre des huiles sur la dégradation thermo-oxydante est montrée. Ces composés protègent naturellement les huiles de base contre l'oxydation, mais deviennent des précurseurs de dépôts dans des conditions d'oxydation sévères, en présence d'un catalyseur, tel le fer, qui est toujours présent dans un moteur. L'action des additifs antioxydants, inhibiteurs radicalaires et décomposeurs d'hydroperoxydes, est étudiée à l'aide d'essais d'oxydation en couche mince et en volume. Les produits d'oxydation sont identifiés, ce qui a permis d'améliorer la connaissance des processus de dégradation des composés en cours d'oxydation, et de montrer l'influence de ces processus sur la formation d'espèces oxydées volatiles, l'augmentation de la viscosité de l'huile et la formation d'espèces oxydées de haute masse molaire qui, en se condensant, participent à la formation de composés insolubles et de dépôts. This survey is based on an understanding of problems linked to the high-temperature oxidation of base stocks used for the formulation of lubricants for automotive engines. The oils investigated are of different origins : Middle East (MO and the North Sea (MDN, which respectively have high and low aromatics and sulfur contents, hydroisomerized oil (HYDI and polyalphaolefins (PA06, which are exempt from these compounds, and hydrocracked oil (HYDC, which has an intermediate

  2. Solidification of residual fission-product solutions; laboratory studies; Solidification de solutions residuaires concentrees de produits de fission: etudes de laboratoire

    Energy Technology Data Exchange (ETDEWEB)

    Boniaud, R; Cohen, P; Sombret, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    This paper describes the results obtained, at laboratory scale, during the study of the incorporation of fission products into glasses and synthetic micas. The rate of leaching of fission products from the glass and their volatility during firing were measured. A hot cell was built to complete these results. (author) [French] Ce rapport resume le resultat des etudes faites en laboratoire (activite de l'ordre du millicurie) sur l'incorporation des produits de fission dans des verres et micas synthetiques. On a mesure le taux de lixiviation des produits de fission et leur volatilisation au cours de la cuisson. Une cellule chaude a ete installee pour completer ces resultats au moyen d'essais realises avec une activite superieure. (auteur)

  3. Iodinated contrast media nephrotoxicity. Nephrotoxicite des produits de contraste iodes

    Energy Technology Data Exchange (ETDEWEB)

    Meyrier, A. (Hopital Avicenne, 93 - Bobigny (France))

    1994-01-01

    In the late seventies, iodinated contrast agents (ICA) were considered to be a major cause of acute iatrogenic renal failure. Over the last decade new contrast agents have been synthesized, nonionic and less hyperosmolar. The incidence of acute renal failure due to ICAs, varies from 3.7 to 70% of cases according to the series, with an average figure of 10.2%. The pathophysiology of ICA nephrotoxicity was mainly studied in laboratory animal models. Three main factors are involved in an inducing ICA-mediated decrease in glomerular filtration rate: reduction of the renal plasma flow, a direct cytotoxic effect on renal tubular cells and erythrocyte alteration leading to intra-renal sludge. Excluding dysglobulinemias with urinary excretion of immunoglobulin light chains, which represent a special case of maximum nephrotoxicity, 4 main risk factors of renal toxicity have been identified in nondiabetic subjects: previous renal failure with serum creatinine levels greater than 140 [mu]mol per liter, extracellular dehydration, age over 60 and use of high doses of ICA and/or repeated ICA injections before serum creatinine levels return to baseline. Preventive measures for avoiding ICA nephrotoxicity are threefold: maintain or restore adequate hydration with saline infusion, stop NSAID treatment several days before ICA administration, and allow a 5 day interval before repeating contrast media injections. New, nonionic and moderately hyperosmolar contrast agents appear to be much less nephrotoxic than conventional ICAs in laboratory animals and in high-risk patients. It is advisable to select such contrast media for investigating high-risk patients. This approach was recently substantiated in well designed, randomized clinical studies which included more than 2 000 patients. (author).

  4. Commission des Nations Unies sur les produits indispensables aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    United Nations Commission on Commodities for Women's and Children's Health. Too often, cost effective, high impact medicines - those that could address critical health problems such as pneumonia, diarrhea, and post-partum hemorrhage - don't reach the women and... View moreUnited Nations Commission on ...

  5. Surveillance écologique communautaire des produits forestiers non ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    IWRA/IDRC webinar on climate change and adaptive water management ... Eleven world-class research teams set to improve livestock vaccine development and production to ... Building resilience through socially equitable climate action.

  6. autonomisation économique des femmes et économie du soin des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Alanna Karpa

    dépend en grande partie d'un financement versé par des bailleurs de fonds et qui est aux prises avec ... services dont leurs enfants ont besoin et à intégrer le marché du travail. ..... roulement, qui produit des services de soins de faible qualité.

  7. Modeling in situ vitrification

    International Nuclear Information System (INIS)

    Mecham, D.C.; MacKinnon, R.J.; Murray, P.E.; Johnson, R.W.

    1990-01-01

    In Situ Vitrification (ISV) process is being assessed by the Idaho National Engineering Laboratory (INEL) to determine its applicability to transuranic and mixed wastes buried at INEL'S Subsurface Disposal Area (SDA). This process uses electrical resistance heating to melt waste and contaminated soil in place to produce a durable glasslike material that encapsulates and immobilizes buried wastes. This paper outlines the requirements for the model being developed at the INEL which will provide analytical support for the ISV technology assessment program. The model includes representations of the electric potential field, thermal transport with melting, gas and particulate release, vapor migration, off-gas combustion and process chemistry. The modeling objectives are to help determine the safety of the process by assessing the air and surrounding soil radionuclides and chemical pollution hazards, the nuclear criticality hazard, and the explosion and fire hazards, help determine the suitability of the ISV process for stabilizing the buried wastes involved, and help design laboratory and field tests and interpret results. 3 refs., 2 figs., 1 tab

  8. Use of proportional counter in X-Ray spectrometry between 5 and 100 keV. Application to the detection of fission products and to the determination of absolute X-Ray disintegration rates; Utilisation d'un compteur proportionnel en spectrometrie de rayons X entre 5 et 100 keV. Application a la detection des produits de fission et a la determination des taux d'emission X absolus

    Energy Technology Data Exchange (ETDEWEB)

    Cerf, J [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1969-07-01

    'un melange d'argon et de methane a la pression de trois atmospheres environ dans un domaine d'energie de 5 100 kev. Utilise dans ces conditions, ce compteur nous a permis de mesurer le taux d'emission absolu de rayonnements X du {sup 133}Ba et du {sup 75}Se, et de proceder a l'etude d'un echantillon de produits de fission. De meme, nous avons egalement utilise des melanges gazeux a base de xenon, afin d'augmenter le rendement du detecteur; dans ce dernier cas, nous avons particulierement examine les limitations introduites par la presence de nombreuses raies parasites issues du gaz. C'est ainsi que nous avons mis en evidence, outre les pics d'echappement, la raie de fluorescence du gaz dont l'origine est difficilement explicable. (auteur)

  9. Wastes vitrification by plasma torch: study of a glass formulation compatible with a wide range of B wastes; Vitrification des dechets par torche a plasma: recherche d'une formulation de verre compatible avec un large eventail de dechets B

    Energy Technology Data Exchange (ETDEWEB)

    Poitou, S.; Richaud, D.; Fiquet, O.; Gramondi, P.; Massit, H. [CEA Cadarache, Dept. d' Entreposage et de Stockage des Dechets, 13 - Saint-Paul-lez-Durance (France)

    2001-07-01

    Within the context of radioactive waste management, CEA has equipped itself with a 'PLASMARC' device. The central element of this device is a plasma torch treatment furnace. It has been implemented and validated for the vitrification of low level radioactive wastes. Meanwhile, the plasma torch presents potentially interests for immobilizing under an inert form in vitreous matrices, B wastes which are generally divided and of complex chemical composition. The application of this process to this type of wastes has been studied here. The obtained results show that with the plasma torch it is possible to make glasses with a high amount of silicon and aluminium oxide and which are adapted to the treatment / packaging of the B wastes. (O.M.)

  10. Vitrification development for mixed wastes

    International Nuclear Information System (INIS)

    Merrill, R.; Whittington, K.; Peters, R.

    1995-02-01

    Vitrification is a promising approach to waste-form immobilization. It destroys hazardous organic compounds and produces a durable and highly stable glass. Vitrification tests were performed on three surrogate wastes during fiscal year 1994; 183-H Solar Evaporation Basin waste from Hanford, bottom ash from the Oak Ridge TSCA incinerator, and saltcrete from Rocky Flats. Preliminary glass development involved melting trials followed by visual homogeneity examination, short-duration leach tests on glass specimens, and long-term leach tests on selected glasses. Viscosity and electrical conductivity measurements were taken for the most durable glass formulations. Results for the saltcrete are presented in this paper and demonstrate the applicability of vitrification technology to this mixed waste

  11. Vitrification chemistry and nuclear waste

    International Nuclear Information System (INIS)

    Plodinec, M.J.

    1985-01-01

    The vitrification of nuclear waste offers unique challenges to the glass technologist. The waste contains 50 or 60 elements, and often varies widely in composition. Most of these elements are seldom encountered in processing commercial glasses. The melter to vitrify the waste must be able to tolerate these variations in composition, while producing a durable glass. This glass must be produced without releasing hazardous radionuclides to the environment during any step of the vitrification process. Construction of a facility to convert the nearly 30 million gallons of high-level nuclear waste at the Savannah River Plant into borosilicate glass began in late 1983. In developing the vitrification process, the Savannah River Laboratory has had to overcome all of these challenges to the glass technologist. Advances in understanding in three areas have been crucial to our success: oxidation-reduction phenomena during glass melting; the reaction between glass and natural wastes; and the causes of foaming during glass melting

  12. Commercialization project of Ulchin vitrification

    International Nuclear Information System (INIS)

    Jo, Hyun-Jun; Kim, Cheon-Woo; Hwang, Tae-Won

    2011-01-01

    The Ulchin Vitrification Facility (UVF), to be used for the vitirification of low- and intermediate-level radioactive waste (LILW) generated by nuclear power plants (NPPs), is the world's first commercial facility using Cold Crucible Induction Melter (CCIM) technology. The construction of the facility was begun in 2005 and was completed in 2007. From December 2007 to September 2009, all key performance tests, such as the system functional test, the cold test, the hot test, and the real waste test, were successfully carried out. The UVF commenced commercial operation in October 2009 for the vitrification of radioactive waste. (author)

  13. Chloride removal from vitrification offgas

    Energy Technology Data Exchange (ETDEWEB)

    Slaathaug, E.J. [Westinghouse Hanford Co., Richland, WA (United States)

    1995-06-01

    This study identified and investigated techniques of selectively purging chlorides from the low-level waste (LLW) vitrification process with the purge stream acceptable for burial on the Hanford Site. Chlorides will be present in high concentration in several individual feeds to the LLW Vitrification Plant. The chlorides are highly volatile in combustion type melters and are readily absorbed by wet scrubbing of the melter offgas. The Tank Waste Remediation System (TWRS) process flow sheets show that the resulting chloride rich scrub solution is recycled back to the melter. The chlorides must be purged from the recycle loop to prevent the buildup of excessively high chloride concentrations.

  14. Chloride removal from vitrification offgas

    International Nuclear Information System (INIS)

    Slaathaug, E.J.

    1995-01-01

    This study identified and investigated techniques of selectively purging chlorides from the low-level waste (LLW) vitrification process with the purge stream acceptable for burial on the Hanford Site. Chlorides will be present in high concentration in several individual feeds to the LLW Vitrification Plant. The chlorides are highly volatile in combustion type melters and are readily absorbed by wet scrubbing of the melter offgas. The Tank Waste Remediation System (TWRS) process flow sheets show that the resulting chloride rich scrub solution is recycled back to the melter. The chlorides must be purged from the recycle loop to prevent the buildup of excessively high chloride concentrations

  15. Continuous analytical control of the streaming waters in a uranium treatment plant and of various chemical products using automatic discharge valves; Controle par analyse en continu des eaux de ruissellement d'une usine traitant de l'uranium et divers produits chimiques avec commande automatique des vannes de decharge

    Energy Technology Data Exchange (ETDEWEB)

    Archimbaud, M; Simeon, C [Commissariat a l' Energie Atomique, Pierrelatte (France)

    1968-07-01

    This report describes a method for controlling the streaming waters produced by the Pierrelatte Centre; it is based on continuous analysis, with simultaneous recording of the species liable to be found accidentally in the corresponding hydrological circuits (chlorides, fluorides, chromium VI, uranium). An alarm set off at pre-determined thresholds leads to an automatic cutting off of the discharge valves; the outward flow of the waters is thus interrupted. This study has shown the various applications which can be found for this water control method, and gives an idea of the cost price. (authors) [French] Ce rapport decrit un mode de controle des eaux de ruissellement provenant du Centre de Pierrelatte base sur une analyse en continu, avec enregistrement des corps susceptibles de se retrouver accidentellement dans les reseaux hydrologiques correspondants (chlorures, fluorures, chrome VI, uranium). Le declenchement d'une alarme a partir de seuils choisis permet de fermer automatiquement les vannes de decharge et d'arreter ainsi l'ecoulement vers l'exterieur. Cette etude montre quelles peuvent etre les diverses applications de cette methode de controle des eaux et elle indique un ordre de grandeur du prix de revient. (auteurs)

  16. Impact écotoxicologique de mélanges de pesticides sur des fonctions microbiennes des sols : apport d’une prise en compte écologique dans l’évaluation des risques

    OpenAIRE

    Devers-Lamrani, Marion; Rouard, Nadine; Cheviron, Nathalie; Grondin, Virginie; Martin-Laurent, Fabrice

    2015-01-01

    L’utilisation de pesticides permet d’assurer la qualité de la production végétale mais elle contribue à la contamination des sols et des eaux et produit des effets sur des organismes noncibles. L’évaluation des risques requièrent actuellement une meilleure prise en compte des effets des pesticides sur le fonctionnement des écosystèmes. Or, les démarches et indicateurs classiques manquent de représentativité écologique. La fonction microbienne de biodégradation des pesticides est essentielle c...

  17. Selecting a plutonium vitrification process

    Energy Technology Data Exchange (ETDEWEB)

    Jouan, A. [Centre d`Etudes de la Vallee du Rhone, Bagnols sur Ceze (France)

    1996-05-01

    Vitrification of plutonium is one means of mitigating its potential danger. This option is technically feasible, even if it is not the solution advocated in France. Two situations are possible, depending on whether or not the glass matrix also contains fission products; concentrations of up to 15% should be achievable for plutonium alone, whereas the upper limit is 3% in the presence of fission products. The French continuous vitrification process appears to be particularly suitable for plutonium vitrification: its capacity is compatible with the required throughout, and the compact dimensions of the process equipment prevent a criticality hazard. Preprocessing of plutonium metal, to convert it to PuO{sub 2} or to a nitric acid solution, may prove advantageous or even necessary depending on whether a dry or wet process is adopted. The process may involve a single step (vitrification of Pu or PuO{sub 2} mixed with glass frit) or may include a prior calcination step - notably if the plutonium is to be incorporated into a fission product glass. It is important to weigh the advantages and drawbacks of all the possible options in terms of feasibility, safety and cost-effectiveness.

  18. Recueillir des données probantes à l'échelle des collectivités pour ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet contribue à la collecte, à l'échelle des collectivités, de données probantes sur les souvenirs des victimes de violations des droits de la personne. Il vise aussi à trouver des stratégies de reconstruction post-atrocités dans un cadre local sûr. Enfin, l'équipe a créé un site Web et produit plusieurs publications.

  19. Production de Oreochromis niloticus avec des aliments à base de ...

    African Journals Online (AJOL)

    Sci-Nat

    ... (LEBA), UFR des Sciences et Gestion de l'Environnement, Université ... Des alevins de Oreochromis niloticus (0,7 ± 0,06 g) ont été nourris dans seize ... de poisson, est un produit industriel et a servi de témoin. .... stock d'alevins récoltés.

  20. Seroprevalence des anticorps anti-HBc chez les donneurs de sang ...

    African Journals Online (AJOL)

    'hépatite virale demeure une priorité pour les centres de qualification des produits sanguins labiles au Togo. Objectif: Déterminer la séroprévalence des anticorps anti-HBc au sein des donneurs de sang en vue d'estimer le niveau de risque ...

  1. Diagnostic et caractérisation microbiologique des procédés ...

    African Journals Online (AJOL)

    Cependant toutes les exigences des bonnes pratiques de fabrication et de suivi des lots ne sont pas systématiquement respectées comme la mise en place du plan HACCP (Hazard Analysis Critical Control Point) et un suivi sur le plan microbiologique des produits. Ainsi, l'objectif de ce travail est d'évaluer les diagrammes ...

  2. Contribution du warrantage à l'accès des petits producteurs au ...

    African Journals Online (AJOL)

    Contribution du warrantage à l'accès des petits producteurs au marché des intrants et des produits agricoles dans les communes rurales de Kléla, Fama et Zebala dans la région de Sikasso au Mali. D Sogodogo, O Dembele, S Konate, S Koumare ...

  3. Contribution to research on the metabolism of fission product. Studies on the physico-chemical state and the metabolic fate of radio-cerium solution; Contribution a l'etude du metabolisme des produits de fission. Recherches sur l'etat physico-chimique et le devenir metabolique des solutions de radiocerium

    Energy Technology Data Exchange (ETDEWEB)

    Aeberhardt, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    This paper describes a study of the physico-chemical state of radio-cerium in dilute solutions on the tracer scale, as a function of the pH of the solution. The way in which this radioelement is transported in the blood is studied in vitro and in vivo, with reference to the ionic or colloidal state of the radio-cerium used. The distribution of cerium amongst the various components of the blood is studied by a new method of blood fractionation and by paper electrophoresis. Evidence of a cerium globulin connection is shown in the case of ionic cerium. A study of the initial distribution of radio-cerium in rats, after intravenous administration of ionic or colloidal solutions, shows considerable differences according to the physico-chemical state of the cerium injected. (author) [French] Ce travail presente une etude de l'etat physico-chimique du radiocerium en solutions diluees a l'echelle des indicateurs, en fonction du pH de la solution. En fonction de l'etat ionique ou colloidal du radiocerium utilise, le mode de transport de ce radioelement dans le sang est etudie in vitro et in vivo. La distribution du cerium entre les differents constituants du sang est etudiee par une methode nouvelle de fractionnement du sang et par electrophorese sur papier. L'existence d'une liaison cerium-globuline est mise en evidence dans le cas du cerium ionique. L'etude de la distribution initiale du radiocerium, chez le rat apres administration par voie veineuse de solutions ionique ou colloidale, montre des differences importantes en fonction de l'etat physico-chimique du cerium injecte. (auteur)

  4. Some aspects of nuclear graphite production in France; Etude generale sur les graphites nucleaires produits en France

    Energy Technology Data Exchange (ETDEWEB)

    Gueron, J; Hering, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Legendre, A [Pechiney, 75 - Paris (France)

    1958-07-01

    1) Manufacturing: A summary and results on the CEA-Pechiney purification process are given. Variations in the preparation of green pastes and their effects on graphitized material are described. 2) Physical and mechanical properties: Results are given on: - Statistics of dimensional variatior products having square cross-section. - Statistical variation of thermal expansion coefficients and of electrical conductivity. - Density of normals to carbon layer planes and their connexion with thermal expansion. - Stress-strain cycles and conclusions drawn therefrom. - Mechanical resistance and gas permeability of items for supporting fuel elements. 3) Behaviour under radiation: Alteration under radiation of French graphites irradiated either in G1 pile or in experimental piles, and thermal annealing of those alterations, are given. (author)Fren. [French] 1) Fabrication: On resume le procede d'epuration CEA-PECHINEY, ainsi que diverses modalites de preparation des pates et on expose les resultats obtenus. 2) Proprietes physiques et mecaniques: On indique le resultat d'etudes sur: - la statistique des dimensions de produits a section carree. - celle des variations des coefficients de dilatation thermique et de la conductibilite electrique. - la densite des normales aux plans graphitiques et leur connexion avec la dilatation thermique. - la compression mecanique du graphite. - la solidite mecanique et la permeabilite aux gaz de pieces destinees a supporter des cartouches de combustible. 3) Tenue sous rayonnement: Modification sous rayonnement des graphites fran is irradies soit dans la pile G1, soit dans des piles experimentales, et guerison thermique de ces modifications. (auteur)

  5. Vitrification of hazardous and radioactive wastes

    International Nuclear Information System (INIS)

    Bickford, D.F.; Schumacher, R.

    1995-01-01

    Vitrification offers many attractive waste stabilization options. Versatility of waste compositions, as well as the inherent durability of a glass waste form, have made vitrification the treatment of choice for high-level radioactive wastes. Adapting the technology to other hazardous and radioactive waste streams will provide an environmentally acceptable solution to many of the waste challenges that face the public today. This document reviews various types and technologies involved in vitrification

  6. Status of the French AVM vitrification facility

    International Nuclear Information System (INIS)

    Bonniaud, R.A.; Jouan, A.F.; Sombret, C.G.

    1979-01-01

    The Commission of the Marcoule Vitrification Plant (or AVM) has opened the industrial development era for the continuous vitrification process. Radioactive liquid wastes are calcinated in a rotary kiln to give a solid form, mixed with suitable raw materials in an electric furnace to make the glass. The glass is poured in containers and transferred to a disposal facility. The off gas released are processed. Design of La Hague next vitrification plant is given

  7. Glasses and nuclear waste vitrification

    International Nuclear Information System (INIS)

    Ojovan, Michael I.

    2012-01-01

    Glass is an amorphous solid material which behaves like an isotropic crystal. Atomic structure of glass lacks long-range order but possesses short and most probably medium range order. Compared to crystalline materials of the same composition glasses are metastable materials however crystallisation processes are kinetically impeded within times which typically exceed the age of universe. The physical and chemical durability of glasses combined with their high tolerance to compositional changes makes glasses irreplaceable when hazardous waste needs immobilisation for safe long-term storage, transportation and consequent disposal. Immobilisation of radioactive waste in glassy materials using vitrification has been used successfully for several decades. Nuclear waste vitrification is attractive because of its flexibility, the large number of elements which can be incorporated in the glass, its high corrosion durability and the reduced volume of the resulting wasteform. Vitrification involves melting of waste materials with glass-forming additives so that the final vitreous product incorporates the waste contaminants in its macro- and micro-structure. Hazardous waste constituents are immobilised either by direct incorporation into the glass structure or by encapsulation when the final glassy material can be in form of a glass composite material. Both borosilicate and phosphate glasses are currently used to immobilise nuclear wastes. In addition to relatively homogeneous glasses novel glass composite materials are used to immobilise problematic waste streams. (author)

  8. Effets des pesticides à faibles doses sur le système nerveux et la reproduction chez l'abeille

    OpenAIRE

    Belzunces, Luc; Collet, Claude; Brunet, Jean-Luc

    2016-01-01

    Au cours de leur activité de butinage, les abeilles sont soumises au contact de nombreux polluants dont les produits phytopharmaceutiques ou pesticides. Les pesticides peuvent induire des effets létaux ou des effets sublétaux délétères qui compromettent la survie des colonies d’abeilles. La caractérisation des effets des pesticides peut s’effectuer a priori, c’est à dire dans un cadre règlementaire avant homologation du produits phytopharmaceutique, soit a posteriori, c’est dire dans le cadre...

  9. Utilisation des espèces du genre Aframomum ( Aframomum ...

    African Journals Online (AJOL)

    La génération des radicaux libres résultant de l'oxydation des lipides est l'un des problèmes associés à la perte des aliments et des maladies notamment celles liées au surpoids et à l'obésité. Les espèces oxygénées réactives telles que le radical hydroxyle et les hydroperoxydes sont généralement produites par des ...

  10. Analytical chemistry equipment for radioactive products; Installation de chimie analytique pour produits radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Douis, M; Guillon, A; Laurent, H; Sauvagnac, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    The report deals with a shielded enclosure, hermetic, for analytical examination and handling of radioactive products. Remote handling for the following is provided: pipette absorption - weighing - centrifuging - desiccation - volumetric - pH measurement - potentiometric - colorimetric - polarographic. The above list is not restrictive: the enclosure is designed for the rapid installation of other equipment. Powerfully ventilated and screened to 400 m-curies long life fission product levels by 5 cm of lead, the enclosure is fully safe to the stated level. (author) [French] La presente communication decrit une enceinte etanche et blindee permettant un travail et un controle analytique sur des produits radioactifs. Les techniques suivantes sont adaptees pour une manipulation a distance: pipettage, pesees, centrifugation, dessiccation, volumetrie, mesure de pH, potentiometrie, colorimetrie, polarographie. Cette liste n'est pas limitative. La conception de l'installation permet la mise en place rapide d'autres appareils. Protegee par 5 cm de plomb et fortement ventilee, elle donne toute securite de manipulation jusqu'a un niveau d'activite 400 mcuries en produits de fission a vie longue. (auteur)

  11. Vitrification for stability of scrap and residue

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, C.W. [Oak Ridge National Lab., TN (United States)

    1996-05-01

    A conference breakout discussion was held on the subject of vitrification for stabilization of plutonium scrap and residue. This was one of four such sessions held within the vitrification workshop for participants to discuss specific subjects in further detail. The questions and issues were defined by the participants.

  12. Preliminary hazards analysis -- vitrification process

    International Nuclear Information System (INIS)

    Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P.

    1994-06-01

    This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility's construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment

  13. Preliminary hazards analysis -- vitrification process

    Energy Technology Data Exchange (ETDEWEB)

    Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1994-06-01

    This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.

  14. The reprocessing of irradiated fuels improvement and extension of the solvent extraction process; Le traitement des combustibles irradies amelioration et extension du procede utilisant les solvants

    Energy Technology Data Exchange (ETDEWEB)

    Faugeras, P; Chesne, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    Improvements made in the conventional tri-butylphosphate process are described, in particular. the concentration and the purification of plutonium by one extraction cycle using tri-butyl-phosphate with reflux; and the use of an apparatus working continuously for precipitating plutonium oxalate, for calcining the oxalate, and for fluorinating the oxide. The modifications proposed for the treatment of irradiated uranium - molybdenum alloys are described, in particular, the dissolution of the fuel, and the concentration of the fission product solutions. The solvent extraction treatment is used also for the plutonium fuels utilized for the fast breeder reactor (Rapsodie) An outline of the process is presented and discussed, as well as the first experimental results and the plans for a pilot plant having a capacity of 1 kg/day. The possible use of tn-lauryl-amine in the plutonium purification cycle is now under consideration for the processing plant at La Hague. The flowsheet for this process and its performance are presented. The possibility of vitrification is considered for the final treatment of the concentrated radioactive wastes from the Marcoule (irradiated uranium) and La Hague (irradiated uranium-molybdenum) Centers. Three possible processes are described and discussed, as well as the results obtained from the operation of the corresponding experimental units using tracers. (authors) [French] On decrit les ameliorations apportees au procede classique utilisant le phosphate tributylique, et notamment la concentration et la purification du plutonium par un cycle d'extraction au tributylphosphate avec reflux, l'utilisation d'un appareillage continu de precipitation d'oxalate de plutonium, de calcination de l'oxalate, et de fluoration de l'oxyde. On presente les modifications envisagees pour le traitement des alliages uranium-molybdene irradies, principalement en ce qui concerne la dissolution du combustible et la concentration des solutions de produits de fission

  15. Effet sur la compétitivité des réglementations relatives à la gestion des effluents

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    2004-01-01

    Grâce à un regard approfondi sur le secteur laitier dans les pays de l'OCDE, cette étude permet de mieux analyser l'impact des subventions à l'agriculture et des politiques de l'environnement sur l'environnement et sur la compétitivité internationale des produits laitiers. Ce chapitre étudie les ...

  16. Closed system for bovine oocyte vitrification

    Directory of Open Access Journals (Sweden)

    Helena Ševelová

    2012-01-01

    Full Text Available The aim of our study was to develop a vitrification carrier for bovine oocyte cryopreservation. The carrier was to be cheap enough, elementary in its construction and meet contemporary requirements for a safe closed system. In a closed system, a cell is prevented from direct exposure to liquid nitrogen, thus minimizing the risk of cross-contamination. Furthermore, two questions regarding the proper vitrification technique were resolved: if it is necessary to partially denude the oocytes before the vitrification process or whether intact cumulus oocyte complexes should be frozen; and if it is more advantageous to preheat the vitrification solutions to female body temperature (39 °C or to keep them at room temperature. Our results show that it is better to partially denude the oocytes prior to vitrification because cryopreserved intact cumulus oocyte complexes often proved dark, non-homogeneous or fragmented cytoplasm after warming, with many of them having visibly widened perivitelline spaces or fractured zonae pellucidae as a result of extensive damage during vitrification. Consequently, intact cumulus oocyte complexes showed significantly lower numbers of cleavage stage embryos on Day 3 compared to partially denuded oocytes (7.4% and 26%, respectively. On the other hand, the survival rate and following development of fertilized oocytes in preheated vitrification solution were equal to results reached at room temperature conditions. In conclusion, results achieved with the newly developed carrier were comparable to previously published studies and therefore they could be recommended for common use.

  17. Vitrification pilot plant experiences at Fernald, Ohio

    International Nuclear Information System (INIS)

    Akgunduz, N.; Gimpel, R.F.; Paine, D.; Pierce, V.H.

    1997-01-01

    A one metric ton/day Vitrification Pilot Plant (VITPP) at Fernald, Ohio, simulated the vitrification of radium and radon bearing silo residues using representative non-radioactive surrogates containing high concentrations of lead, sulfates, and phosphates. The vitrification process was carried out at temperatures of 1,150 to 1,350 C. The VITPP processed glass for seven months, until a breach of the melter containment vessel suspended operations. More than 70,000 pounds of surrogate glass were produced by the VITPP. Experiences, lessons learned, and path forward will be presented

  18. Faux produits et marchandises contrefaites dans la Chine et le Japon prémodernes. Réglementations, corps de métiers et contraintes éthiques1

    OpenAIRE

    Carré, Guillaume; Lamouroux, Christian

    2013-01-01

    L’article est consacré au problème des faux produits et des copies, abordé à partir de deux exemples, les soies et soieries dans la Chine des Song et les faux remèdes pharmaceutiques dans le Japon d’Edo, deux sociétés marquées par la croissance du secteur commercial entraînant de rapides changements sociaux. Notre approche s’est concentrée sur trois points : 1) le rôle des marchands et des intermédiaires dans la stabilité et la légalité des échanges ; 2) les négociations permanentes entre les...

  19. Les peptides antimicrobiens d'origine microbienne: cas des ...

    African Journals Online (AJOL)

    Les bactéries à Gram positif et à Gram négatif et les archées produisent respectivement des bactériocines et des archéocines. Les bactériocines et les archéocines sont des peptides antimicrobiens. Au fil des ans leur rôle dans la sûreté des produits alimentaires n'a cessé d'être démontré, faisant de ces peptides naturels ...

  20. Vitrification processes for fission product solutions

    International Nuclear Information System (INIS)

    Bonniaud, R.; Jouan, A.; Moncouyoux, J.P.; Sombret, C.

    1982-10-01

    The different processes for fission product vitrification in the world are reviewed. Continuous or discontinuous processes, induction or arc heating, in can melting or casting, tests with radioactive or simulated wastes and industrial realizations are described [fr

  1. Hanford waste vitrification systems risk assessment

    International Nuclear Information System (INIS)

    Miller, W.C.; Hamilton, D.W.; Holton, L.K.; Bailey, J.W.

    1991-09-01

    A systematic Risk Assessment was performed to identify the technical, regulatory, and programmatic uncertainties and to quantify the risks to the Hanford Site double-shell tank waste vitrification program baseline (as defined in December 1990). Mitigating strategies to reduce the overall program risk were proposed. All major program elements were evaluated, including double-shell tank waste characterization, Tank Farms, retrieval, pretreatment, vitrification, and grouting. Computer-based techniques were used to quantify risks to proceeding with construction of the Hanford Waste Vitrification Plant on the present baseline schedule. Risks to the potential vitrification of single-shell tank wastes and cesium and strontium capsules were also assessed. 62 refs., 38 figs., 26 tabs

  2. Radioactive waste vitrification: A review

    International Nuclear Information System (INIS)

    Cole, L.L.; Fields, D.E.

    1989-08-01

    The research and development of an immobilization process for the containment of nuclear high-level liquid waste has been underway for well-over the past four decades. The method that has become the state-of-the-art is the liquid-fed ceramic melter process which converts a mixture of high-level liquid waste and glass forming frit to a borosilicate glass product. This report gives a chronological review of the various vitrification processes starting with the very first reported process in 1960. Information on the early methods of frit selection as well as information on the currently computerized method are presented. The importance of all these parameters is discussed with regard to product durability. 26 refs., 8 figs., 1 tab

  3. Delayed Neutrons and Photoneutrons from Fission Products; Neutrons Retardes et Photoneutrons Emis par des Produits de Fission; 0417 0410 041f 0410 0417 0414 042b 0412 0410 042e 0429 0418 0415 041d 0415 0419 0422 0420 041e 041d 042b 0418 0424 041e 0422 041e 041d 0415 0419 0422 0420 041e 041d 042b 041f 0420 041e 0414 0423 041a 0422 041e 0412 0414 0415 041b 0415 041d 0418 042f ; Neutrones Retardados y Fotoneutrones de los Productos de Fision

    Energy Technology Data Exchange (ETDEWEB)

    Amiel, S. [Soreq Nuclear Research Centre, Atomic Energy Commission, Yavne (Israel)

    1965-07-15

    photoneutron emission after fission represents the composite decay of the corresponding gamma- ray-emifting nuclides in the mixture of fission product chains. The gross photoneutron decay curves from both D{sub 2}O and beryllium have been resolved into nine groups with half-lives ranging from a few seconds to {approx}13 d. Each of these groups represents a complex composite of nuclides. Derailed information on the constituents of these groups is important for reactors in which fission products fractionation may take place and affect relative group abundances. Such information exists only for the longer-lived fission products whose properties and yields are well known, and where experimental results are in agreement with calculated values based on fission mass and charge distributions and decay schemes. The characterization of individual nuclides in the more complex short-lived groups is indeed a formidable task, but this information is of considerable practical and theoretical importance, and warrants further extensive study. (author) [French] Neutrons retardes: La plupart des etudes sur les neutrons retardes emis par des produits de fission impliquent l'analyse du comportement cinetique des systemes qui subissent une reaction de fission en chaine, l'analyse de la desintegration totale des neutrons (se resolvant en six groupes avec des periodes d'environ 0,2, 0,5, 2, 6, 22 et 55 s) et cettaines mesures des spectres de neutrons - ayant une energie comprise entre 0,1 et 1.2 MeV, avec des pics dans la gamme de 0,2 a 0,5 MeV. Des separations rapides des halogenes produits par fission ont mis en evidence la presence de sept isotopes ({sup 87,88,89,90}Br et {sup 137,138,139}I) et le dosage des gaz rares a permis d'identifier Kr (1,5 s) et Rb (6 s), comme precurseurs de neutrons retardes. Environ 80% des rendements totaux en neutrons retardes doivent etre attribues aux precurseurs ainsi identifies. A la suite de recherches theoriques, quelques dizaines de ces nucleides ont ete

  4. Vitrification of highly-loaded SDS zeolites

    International Nuclear Information System (INIS)

    Siemens, D.H.; Bryan, G.H.; Knowlton, D.E.; Knox, C.A.

    1982-11-01

    Pacific Northwest Laboratory (PNL) is demonstrating a vitrification system designed for immobilization of highly loaded SDS zeolites. The Zeolite Vitrification Demonstration Project (ZVDP) utilizes an in-can melting process. All steps of the process have been demonstrated, from receipt of the liners through characterization of the vitrified product. The system has been tested with both nonradioactive and radioactive zeolite material. Additional high-radioactivity demonstrations are scheduled to begin in FY-83. 5 figures, 4 tables

  5. Innovative vitrification for soil remediation

    International Nuclear Information System (INIS)

    Jetta, N.W.; Patten, J.S.; Hart, J.G.

    1995-01-01

    The objective of this DOE demonstration program is to validate the performance and operation of the Vortec Cyclone Melting System (CMS trademark) for the processing of LLW contaminated soils found at DOE sites. This DOE vitrification demonstration project has successfully progressed through the first two phases. Phase 1 consisted of pilot scale testing with surrogate wastes and the conceptual design of a process plant operating at a generic DOE site. The objective of Phase 2, which is scheduled to be completed the end of FY 95, is to develop a definitive process plant design for the treatment of wastes at a specific DOE facility. During Phase 2, a site specific design was developed for the processing of LLW soils and muds containing TSCA organics and RCRA metal contaminants. Phase 3 will consist of a full scale demonstration at the DOE gaseous diffusion plant located in Paducah, KY. Several DOE sites were evaluated for potential application of the technology. Paducah was selected for the demonstration program because of their urgent waste remediation needs as well as their strong management and cost sharing financial support for the project. During Phase 2, the basic nitrification process design was modified to meet the specific needs of the new waste streams available at Paducah. The system design developed for Paducah has significantly enhanced the processing capabilities of the Vortec vitrification process. The overall system design now includes the capability to shred entire drums and drum packs containing mud, concrete, plastics and PCB's as well as bulk waste materials. This enhanced processing capability will substantially expand the total DOE waste remediation applications of the technology

  6. L'objectivation et la perfection des femmes dans la publicité. La perception des consommateurs vis-à-vis des femmes représentées dans des campagnes publicitaires et ses effets sur la marque et sur eux-mêmes.

    OpenAIRE

    Van Dessel, Sophie; Loir, Estelle

    2017-01-01

    Depuis son apparition, la publicité contribue consciemment ou inconsciemment au changement de perception du corps de la femme. Dans la société occidentale, utiliser le corps de la femme pour inciter à l’achat d’un produit est une pratique commune dans le marketing. Un ensemble d’effets en tous genres sont à observer sur la perception des consommateurs à propos du produit et sur la marque, sur leur perception vis-à-vis des mannequins et des femmes en général et finalement sur la perception qu’...

  7. Vitrification and xenografting of human ovarian tissue.

    Science.gov (United States)

    Amorim, Christiani Andrade; Dolmans, Marie-Madeleine; David, Anu; Jaeger, Jonathan; Vanacker, Julie; Camboni, Alessandra; Donnez, Jacques; Van Langendonckt, Anne

    2012-11-01

    To assess the efficiency of two vitrification protocols to cryopreserve human preantral follicles with the use of a xenografting model. Pilot study. Gynecology research unit in a university hospital. Ovarian biopsies were obtained from seven women aged 30-41 years. Ovarian tissue fragments were subjected to one of three cryopreservation protocols (slow freezing, vitrification protocol 1, and vitrification protocol 2) and xenografted for 1 week to nude mice. The number of morphologically normal follicles after cryopreservation and grafting and fibrotic surface area were determined by histologic analysis. Apoptosis was assessed by the TUNEL method. Morphometric analysis of TUNEL-positive surface area also was performed. Follicle proliferation was evaluated by immunohistochemistry. After xenografting, a difference was observed between the cryopreservation procedures applied. According to TUNEL analysis, both vitrification protocols showed better preservation of preantral follicles than the conventional freezing method. Moreover, histologic evaluation showed a significantly higher proportion of primordial follicles in vitrified (protocol 2)-warmed ovarian tissue than in frozen-thawed tissue. The proportion of growing follicles and fibrotic surface area was similar in all groups. Vitrification procedures appeared to preserve not only the morphology and survival of preantral follicles after 1 week of xenografting, but also their ability to resume folliculogenesis. In addition, vitrification protocol 2 had a positive impact on the quiescent state of primordial follicles after xenografting. Copyright © 2012 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  8. Renforcement des capacités d'évaluation et de communication en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Enfin, des produits de communication seront mis au point en vue de transmettre ces enseignements concrets aux praticiens, aux chercheurs et aux responsables des politiques. Projet nᵒ. 107064. État du projet. Actif. Durée. 48 mois. Agent(e) responsable du CRDI. Matthew Smith. Financement total. CAD$ 728,060. Pays.

  9. Typologie des élevages de cobayes (Cavia porcellus) au Bénin ...

    African Journals Online (AJOL)

    A cet effet, une enquête conduite suivant la méthode en boule de neige a ... du Sud et du Nord. Quatre types d'élevage ont été identifiés avec des ... les performances de ce petit herbivore ..... l'organisation de la commercialisation des produits ...

  10. Bases génétiques et biochimiques de la capacité germinative des ...

    African Journals Online (AJOL)

    The germination capacity is under the control of internal ..... niveau de l'activité et de la performance des graines ou lots de graines .... mesure pas les hydroperoxydes, mais plutôt le produit de leur ..... de contrôle officiel ou privé de gestion des.

  11. Les frameworks au coeur des applications web

    OpenAIRE

    Moro, Arielle; Daehne, Peter

    2010-01-01

    Depuis quelques années, Internet est vraiment entré dans les mœurs : tant dans les entreprises qu’au sein de chaque foyer. En effet, Internet permet de communiquer à travers le monde en quelques secondes, de vendre toute sorte de produits en déployant des solutions e-commerce facilement et bien d’autres choses. Internet est donc un véritable vecteur de communication, de commerce et à présent, avec le Web 2.0, un vrai berceau d’informations (tant des informations personnelles que des informati...

  12. Les groupes d'agriculteurs, élément clé de l'essor de l'adoption des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    20 sept. 2013 ... Il est ardu de pratiquer l'agriculture dans les zones arides du Kenya en raison des pluies peu abondantes et irrégulières, de l'épuisement des sols et de l'eau et des changements climatiques. Des décennies de recherche en agriculture ont certes produit des technologies efficaces pour accroître la ...

  13. Am/Cm Vitrification Process: Vitrification Material Balance Calculations

    International Nuclear Information System (INIS)

    Smith, F.G.

    2000-01-01

    This report documents material balance calculations for the Americium/Curium vitrification process and describes the basis used to make the calculations. The material balance calculations reported here start with the solution produced by the Am/Cm pretreatment process as described in ``Material Balance Calculations for Am/Cm Pretreatment Process (U)'', SRT-AMC-99-0178 [1]. Following pretreatment, small batches of the product will be further treated with an additional oxalic acid precipitation and washing. The precipitate from each batch will then be charged to the Am/Cm melter with glass cullet and vitrified to produce the final product. The material balance calculations in this report are designed to provide projected compositions of the melter glass and off-gas streams. Except for decanted supernate collected from precipitation and precipitate washing, the flowsheet neglects side streams such as acid washes of empty tanks that would go directly to waste. Complete listings of the results of the material balance calculations are provided in the Appendices to this report

  14. La transmission des effets de la crise alimentaire sur les dépenses de compensation : Cas de la Tunisie

    OpenAIRE

    Akari, Tahar; Jouili, Mustapha

    2010-01-01

    En 2006-2008, le monde à connu une véritable crise alimentaire, due à la hausse sans précédent des cours mondiaux des produits alimentaires En Tunisie, la flambée des cours internationaux des produits alimentaires de base n’a pas tardé à gonfler la facture des importations alimentaires. Celle-ci étant absorbée en partie par l’augmentation des prix à la consommation et en partie à travers l’accroissement des dépenses de la Caisse Générale de Compensation. Toutefois, l’escalade des dépenses de ...

  15. Les affiches des Jeux Olympiques d'hiver de Chamonix 1924 à Vancouver 2010: présentation et visuel des affiches officielles pour chaque édition des Jeux Olympiques d'hiver

    OpenAIRE

    Centre d'Etudes Olympiques du CIO

    2015-01-01

    Les affiches réalisées pour les Jeux Olympiques constituent l’une des facettes de leur identité visuelle. Recourant à tous les styles et toutes les techniques, elles ne cessent d’étonner et d’évoluer. Accédez à travers ce document à une vue d’ensemble des diverses affiches produites par les comités d’organisation pour chaque édition des Jeux.

  16. Résonance magnétique nucléaire 1H basse résolution. Le meilleur outil pour une détermination précise de la teneur en hydrogène des produits pétroliers Low Resolution 1h Nmr. The Ultimate Tool for Accurate Determination of Hydrogen Content in Petroleum Products

    Directory of Open Access Journals (Sweden)

    Gautier S.

    2006-11-01

    Full Text Available Un spectromètre RMN basse résolution à impulsions a été utilisé pour déterminer la teneur totale en hydrogène d'une large gamme de fractions pétrolières. On a constaté une excellente cohérence avec la teneur théorique en hydrogène de plusieurs composés purs; la répétabilité de la méthode est de 0,03%. La validation de cette méthode a été effectuée sur une vaste gamme de produits pétroliers comprenant notamment : distillats moyens de distillation directe, de craquage, d'hydrotraitement ou d'hydrocraquage, gazoles sous vide, bruts lourds, résidus atmosphériques de distillation directe ou d'hydrotraitement, soit au total 121 échantillons. Cette méthode s'est avérée la plus précise pour le calcul de la consommation d'hydrogène sur unités d'hydrotraitement, pour un domaine allant de 0,1 à 2,5 % pds. A low resolution pulsed NMR spectrometer has been used to determine total hydrogen content for a wide range of petroleum cuts. Excellent agreement has been found with the theoritical amount of hydrogen on pure compounds and the repeatability of the method is 0. 03%. The validation of the method has been done on a very large range of petroleum products, including straight run, cracked, hydrotreated and hydrocracked mid-distillates, vacuum gasoils, heavy crudes, straight run and hydrotreated atmospheric residues, representing 121 samples and a hydrogen consumption range during processing from 0,1 to 2. 5 wt.

  17. Vitrification and levitation of a liquid droplet on liquid nitrogen

    OpenAIRE

    Song, Young S.; Adler, Douglas; Xu, Feng; Kayaalp, Emre; Nureddin, Aida; Anchan, Raymond M.; Maas, Richard L.; Demirci, Utkan

    2010-01-01

    The vitrification of a liquid occurs when ice crystal formation is prevented in the cryogenic environment through ultrarapid cooling. In general, vitrification entails a large temperature difference between the liquid and its surrounding medium. In our droplet vitrification experiments, we observed that such vitrification events are accompanied by a Leidenfrost phenomenon, which impedes the heat transfer to cool the liquid, when the liquid droplet comes into direct contact with liquid nitroge...

  18. Determination of bore efficiency loss employed as powder in boral fabrication, proportionately to the dimension of grain; Determination de la reduction d'efficacite du bore ou d'un autre absorbeur employe sous forme de poudre dissemine dans un produit non absorbant, en fonction de la grosseur des grains

    Energy Technology Data Exchange (ETDEWEB)

    Laforge, P; Millot, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    Authors' mind was attracted by the importance of bore granulometry when employed as powder in boral fabrication. The calculation, object of this report, permits to give values for bore efficiency loss, proportionately to the dimension of spherical or ellipsoidal supposed grains. Grains to be employed should exceptionally only exceed 20 {mu} for a correspondent efficiency loss of 8 per cent about. (author) [French] L'attention des auteurs a ete attiree sur l'importance de la granulometrie du bore employe sous forme de poudre dans la fabrication du boral. Le calcul qui fait l'objet de ce rapport permet de chiffrer la perte d'efficacite du bore en fonction de la dimension des grains supposes spheriques ou ellipsoidaux. Les grains a employer ne devraient qu'exceptionnellement etre superieurs a 20 microns, ce qui correspond a une perte d'efficacite d'environ 8 pour cent. (auteur)

  19. Vitrification of copper flotation waste

    Energy Technology Data Exchange (ETDEWEB)

    Karamanov, Alexander [Institute of Physical Chemistry, Bulgarian Academy of Science, G. Bonchev Str. Block 11, 1113 Sofia (Bulgaria)]. E-mail: karama@ing.univaq.it; Aloisi, Mirko [Department of Chemistry, Chemical Engineering and Materials, University of L' Aquila, 67040 Monteluco di Roio, L' Aquila (Italy); Pelino, Mario [Department of Chemistry, Chemical Engineering and Materials, University of L' Aquila, 67040 Monteluco di Roio, L' Aquila (Italy)

    2007-02-09

    The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30 wt% W were melted for 30 min at 1400 deg. C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass frits showed high chemical durability, measured by the TCLP test. The crystallization of the glasses was evaluated by DTA. The crystal phases formed were identified by XRD resulting to be pyroxene and wollastonite solid solutions, magnetite and hematite. The morphology of the glass-ceramics was observed by optical and scanning electron microscopy. WSZ composition showed a high rate of bulk crystallization and resulted to be suitable for producing glass-ceramics by a short crystallization heat-treatment. WG composition showed a low crystallization rate and good sinterability; glass-ceramics were obtained by sinter-crystallization of the glass frit.

  20. The In Situ Vitrification Project

    International Nuclear Information System (INIS)

    Buelt, J.L.

    1988-10-01

    The Columbia Section of the American Society of Civil Engineers (ASCE) is pleased to submit the In Situ Vitrification (ISV) Project to the Pacific Northwest Council for consideration as the Outstanding Civil Engineering Achievement. The ISV process, developed by Battelle-Northwest researchers beginning in 1980, converts contaminated soils and sludges to a glass and crystalline product. In this way it stabilizes hazardous chemical and radioactive wastes and makes them chemically inert. This report describes the process. A square array of four molybdenum electrodes is inserted into the ground to the desired treatment depth. Because soil is not electrically conductive when the moisture has been driven off, a conductive mixture of flaked graphite and glass frit is placed among the electrodes as a starter path. An electrical potential is applied to the electrodes to establish an electric current in the starter path. The resultant power heats the starter path and surrounding soil to 2000/degree/C, well above the initial soil-melting temperature of 1100/degree/C to 1400/degree/C. The graphite starter path is eventually consumed by oxidation, and the current is transferred to the molten soil, which is electrically conductive. As the molten or vitrified zone grows, it incorporates radionuclides and nonvolatile hazardous elements, such as heavy metals, and destroys organic components by pyrolysis. 2 figs

  1. In situ vitrification: A review

    International Nuclear Information System (INIS)

    Cole, L.L.; Fields, D.E.

    1989-11-01

    The in situ vitrification process (ISV) converts contaminated soils and sludges to a glass and crystalline product. The process appears to be ideally suited for on site treatment of both wet and dry wastes. Basically, the system requires four molybdenum electrodes, an electrical power system for vitrifying the soil, a hood to trap gaseous effluents, an off-gas treatment system, an off-gas cooling system, and a process control station. Mounted in three transportable trailers, the ISV process can be moved from site to site. The process has the potential for treating contaminated soils at most 13 m deep. The ISV project has won a number of outstanding achievement awards. The process has also been patented with exclusive worldwide rights being granted to Battelle Memorial Institute for nonradioactive applications. While federal applications still belong to the Department of Energy, Battelle transferred the rights of ISV for non-federal government, chemical hazardous wastes to a separate corporation in 1989 called Geosafe. This report gives a review of the process including current operational behavior and applications

  2. Innovative vitrification for soil remediation

    Energy Technology Data Exchange (ETDEWEB)

    Jetta, N.W.; Patten, J.S.; Hnat, J.G. [Vortec Corp., Collegeville, PA (United States)

    1995-10-01

    The objective of this DOE demonstration program is to validate the performance and operation of the Vortec Cyclone Melting System (CMS{trademark}) for the processing of LLW contaminated soils found at DOE sites. This DOE vitrification demonstration project has successfully progressed through the first two phases. Phase I consisted of pilot scale testing with surrogate wastes and the conceptual design of a process plant operating at a generic DOE site. The objective of Phase 2, which is scheduled to be completed the end of FY 95, is to develop a definitive process plant design for the treatment of wastes at a specific DOE facility. During Phase 2, a site specific design was developed for the processing of LLW soils and muds containing TSCA organics and RCRA metal contaminants. Phase 3 will consist of a full scale demonstration at the DOE gaseous diffusion plant located in Paducah, KY. Several DOE sites were evaluated for potential application of the technology. Paducah was selected for the demonstration program because of their urgent waste remediation needs as well as their strong management and cost sharing financial support for the project.

  3. Vitrification of copper flotation waste.

    Science.gov (United States)

    Karamanov, Alexander; Aloisi, Mirko; Pelino, Mario

    2007-02-09

    The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30wt% W were melted for 30min at 1400 degrees C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass frits showed high chemical durability, measured by the TCLP test. The crystallization of the glasses was evaluated by DTA. The crystal phases formed were identified by XRD resulting to be pyroxene and wollastonite solid solutions, magnetite and hematite. The morphology of the glass-ceramics was observed by optical and scanning electron microscopy. WSZ composition showed a high rate of bulk crystallization and resulted to be suitable for producing glass-ceramics by a short crystallization heat-treatment. WG composition showed a low crystallization rate and good sinterability; glass-ceramics were obtained by sinter-crystallization of the glass frit.

  4. Vitrification of copper flotation waste

    International Nuclear Information System (INIS)

    Karamanov, Alexander; Aloisi, Mirko; Pelino, Mario

    2007-01-01

    The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30 wt% W were melted for 30 min at 1400 deg. C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass frits showed high chemical durability, measured by the TCLP test. The crystallization of the glasses was evaluated by DTA. The crystal phases formed were identified by XRD resulting to be pyroxene and wollastonite solid solutions, magnetite and hematite. The morphology of the glass-ceramics was observed by optical and scanning electron microscopy. WSZ composition showed a high rate of bulk crystallization and resulted to be suitable for producing glass-ceramics by a short crystallization heat-treatment. WG composition showed a low crystallization rate and good sinterability; glass-ceramics were obtained by sinter-crystallization of the glass frit

  5. Waste vitrification: a historical perspective

    International Nuclear Information System (INIS)

    McElroy, J.L.; Bjorklund, W.J.; Bonner, W.F.

    1982-02-01

    The possibility of converting high-level wastes (HLW) to glass was first pursued in Canada and England at a time when other countries were evaluating many other alternatives. By 1966, the British had completed radioactive demonstrations of the FINGAL pot process, converting HLW to borosilicate glass. By this time other countries, including France and the United States, had begun using the glass waste form. Beginning in 1966, several processes, including phosphate and borosilicate glass, were demonstrated by the US in the Waste Solidification Engineering Prototypes (WSEP) program at the Pacific Northwest Laboratory (PNL). Most of the current vitrification processes are adaptations of the FINGAL pot process or the continuous metallic melter used in the WSEP program. One notable exception is the joule-heated ceramic melter, which was adapted from commercial glass technology for HLW by PNL in the mid-1970's. Both batch and continuous processes have been developed to an advanced stage of readiness. These processes are described and compared in this paper

  6. Vitrification development and experiences at Fernald, Ohio

    International Nuclear Information System (INIS)

    Gimpel, R.F.; Paine, D.; Roberts, J.L.; Akgunduz, N.

    1998-01-01

    Vitrification of radioactive wastes products have proven to produce an extremely stable waste form. Vitrification involves the melting of wastes with a mixture of glass-forming additives at high temperatures; when cooled, the wastes are incorporated into a glass that is analogous to obsidian. Obsidian is a volcanic glass-like rock, commonly found in nature. A one-metric ton/day Vitrification Pilot Plant (VITPP) at Fernald, Ohio, simulated the vitrification of radium and radon bearing silo residues using representative non-radioactive surrogates. These non-radioactive surrogates contained high concentrations of lead, sulfates, and phosphates. The vitrification process was carried out at temperatures of 1150 to 1350 C. Laboratory and bench-scale treatability studies were conducted before initiation of the VITPP. Development of the glass formulas, containing up to 90% waste, will be discussed in the paper. The VITPP processed glass for seven months, until a breach of the melter containment vessel suspended operations. More than 70,000 pounds of good surrogate glass were produced by the VITPP. Experiences, lessons learned, and the planned path forward will be presented

  7. Vitrification Facility integrated system performance testing report

    International Nuclear Information System (INIS)

    Elliott, D.

    1997-01-01

    This report provides a summary of component and system performance testing associated with the Vitrification Facility (VF) following construction turnover. The VF at the West Valley Demonstration Project (WVDP) was designed to convert stored radioactive waste into a stable glass form for eventual disposal in a federal repository. Following an initial Functional and Checkout Testing of Systems (FACTS) Program and subsequent conversion of test stand equipment into the final VF, a testing program was executed to demonstrate successful performance of the components, subsystems, and systems that make up the vitrification process. Systems were started up and brought on line as construction was completed, until integrated system operation could be demonstrated to produce borosilicate glass using nonradioactive waste simulant. Integrated system testing and operation culminated with a successful Operational Readiness Review (ORR) and Department of Energy (DOE) approval to initiate vitrification of high-level waste (HLW) on June 19, 1996. Performance and integrated operational test runs conducted during the test program provided a means for critical examination, observation, and evaluation of the vitrification system. Test data taken for each Test Instruction Procedure (TIP) was used to evaluate component performance against system design and acceptance criteria, while test observations were used to correct, modify, or improve system operation. This process was critical in establishing operating conditions for the entire vitrification process

  8. The Effect of Fission Products on the Radioactivity of some Hydrobionts of the Pacific Ocean; Effet des Produits de Fission sur la Radioactivite de Certains Organismes Marins de l'Ocean Pacifique; 0412 041b 0418 0414 ; Influencia de los Productos de Fision en la Radiactividad de Algunos Organismos Marinos del Oceano Pacifico

    Energy Technology Data Exchange (ETDEWEB)

    Moiseev, P. A.; Kardashev, A. V. [All-Union Marine Fisheries and Oceanographical Scientific Research Institute, Moscow, USSR (Russian Federation)

    1960-07-01

    The paper emphasizes the fact that currents in the water masses disperse radioactive elements over large distances, with the result that many marine fauna and flora far removed from the centres of contamination may accumulate dangerous concentrations of such elements. (author) [French] Dans ce memoire, on souligne que les masses d'eau des courants marins transportent les elements radioactifs a de grandes distances; il s'ensuit que de nombreux animaux et vegetaux marins vivant loin des foyers de contamination peuvent accumuler ces elements jusqu'a des concentrations dangereuses. (author) [Spanish] En el informe se pone de manifiesto que las corrientes de agua transportan elementos radiactivos a grandes distancias, por lo cual muchos animales y vegetales marinos, que habiten lejos de los focos de contaminacion, pueden acumular estos elementos en concentraciones peligrosas. (author) [Russian] V doklade podcherkivaetsja, chto vodnye massy raznosjat techenijami radioaktivnye jelementy na bol'shie rasstojanija, v rezul'tate chego mnogie morskie zhivotnye i rastenija, obitajushhie daleko ot ochagov zarazhenija, mogut nakaplivat' ztj jelementy do opasnyh koncentracij. (author)

  9. Influence des actions anthropiques sur la dynamique spatio ...

    African Journals Online (AJOL)

    Sci-Nat

    Située à proximité de Kinshasa, la province du Bas-Congo (R.D. Congo) est l'une des principales pourvoyeuses en produits vivriers de cette ville. Par conséquent, l'augmentation de la pression sur les ressources naturelles s'accentue. L'analyse diachronique du paysage peut servir à montrer l'effet des actions ...

  10. Treatment of NPP wastes using vitrification

    International Nuclear Information System (INIS)

    Sobolev, I.A.; Lifanov, F.A.; Stefanovsky, S.V.; Kobelev, A.P.; Savkin, A.E.; Kornev, V.I.

    1998-01-01

    Glass-based materials to immobilize various liquid and solid radioactive wastes generated at nuclear power plants (NPP) were designed. Glassy waste forms can be produced using electric melting including a cold crucible melting. Leach rate of cesium was found to be 10 -5 -10 -6 g/(cm 2 day) (IAEA technique). Volume reduction factor after vitrification reached 4-5. Various technologies for NPP waste vitrification were developed. Direct vitrification means feeding of source waste into the melter with formation of glassy waste form to be disposed. Joule heated ceramic melter, and cold crucible were tested. Process variables at treatment of Kursk, Chernobyl (RBMK), Kalinin, Novovoronezh (VVER) NPP wastes were determined. The most promising melter was found to be the cold crucible. Pilot plant based on the cold crucibles has been designed and constructed. Solid burnable NPP wastes are incinerated and slags are incorporated in glass. (author)

  11. In situ vitrification: Application to buried waste

    International Nuclear Information System (INIS)

    Callow, R.A.; Thompson, L.E.

    1991-01-01

    Two in situ vitrification field tests were conducted in June and July 1990 at Idaho National Engineering Laboratory. In situ vitrification is a technology for in-place conversion of contaminated soils into a durable glass and crystalline waste form and is being investigated as a potential remediation technology for buried waste. The overall objective of the two tests was to assess the general suitability of the process to remediate buried waste structures found at Idaho National Engineering Laboratory. In particular, these tests were designed as part of a treatability study to provide essential information on field performance of the process under conditions of significant combustible and metal wastes, and to test a newly developed electrode feed technology. The tests were successfully completed, and the electrode feed technology provided valuable operational control for successfully processing the high metal content waste. The results indicate that in situ vitrification is a feasible technology for application to buried waste. 2 refs., 5 figs., 2 tabs

  12. Vitrification process testing for reference HWVP waste

    International Nuclear Information System (INIS)

    Perez, J.M. Jr.; Goles, R.W.; Nakaoka, R.K.; Kruger, O.L.

    1991-01-01

    The Hanford Waste Vitrification Plant (HWVP) is being designed to vitrify high-level radioactive wastes stored on the Hanford site. The vitrification flow-sheet is being developed to assure the plant will achieve plant production requirements and the glass product will meet all waste form requirements for final geologic disposal. The first Hanford waste to be processed by the HWVP will be a neutralized waste resulting from PUREX fuel reprocessing operations. Testing is being conducted using representative nonradioactive simulants to obtain process and product data required to support design, environmental, and qualification activities. Plant/process criteria, testing requirements and approach, and results to date will be presented

  13. Study of the Plugging of Oil Well Sand Control Area in a Polymer Flooding Region Étude du colmatage aux abords des puits d’injection dans un réservoir d’hydrocarbure produit par balayage au polymère

    Directory of Open Access Journals (Sweden)

    Liu Dong

    2012-05-01

    Full Text Available The plugging of the oil well sand control area in a polymer flooding region was studied and the plugging substances were analyzed through UV-Vis spectrophotometer analysis, plasma emission spectrometry analysis, laser particle size analysis, X-Ray Diffractometer (XRD analysis, microscopic observation, chromatograph-mass spectrometer, etc. It is inferred that the main reason for the plugging of the sand control area was the adsorption, gathering and bridging of PAM on the surface of the sand. The migration of the mineral fines from the stratum and the adsorption of the crude oil ingredients on the surface of the fines also result in plugging. An experimental study on the polymer degradation was performed and two types of plug removal agents, potassium persulfate and sodium thiosulfate, were selected and tested. It showed that potassium persulfate and sodium thiosulfate could degrade the plugging substances and recover core permeability effectively. Moreover, field application tests were conducted in Gudao oil field which showed the restoration of the performance of various wells. It also indicated that the injection pressure obviously decreased and liquid production per day increased greatly after application of the plug removal agents in the sand control area. Le colmatage des zones de puits où un contrôle de venues de sable est réalisé par injection de polymère a été étudié et les substances à l’origine du colmatage ont été analysées par spectrophotométrie UV-Visible, spectrométrie à émission de plasma, analyse de taille de particules par diffraction laser, diffraction X (DRX, observation microscopique, spectrométrie de masse, etc. Nous avons conclu que la raison principale du colmatage de la zone de contrôle des venues de sable était l’adsorption, l’accumulation et le pontage du polyacrylamide (PAM à la surface du sable. La migration des fines du milieu poreux et l’adsorption de composés du brut à la surface des

  14. Solidification and vitrification life-cycle economics study

    International Nuclear Information System (INIS)

    Gimpel, R.F.

    1992-01-01

    Solidification (making concrete) and vitrification (making glass) are frequently the treatment methods recommended for treating inorganic or radioactive wastes. Ex-situ solidification and vitrification are the competing methods for treating in excess of 450 000 cm 3 of low-level radioactive and mixed wastes at the Fernald Environmental Management Project (FEMP) located near Cincinnati, Ohio. This paper summarizes a detailed study done to: (1) compare the economics of the solidification and vitrification processes, (2) determine if the stigma assigned to vitrification is warranted and, (3) determine if investing millions of dollars into vitrification development, along with solidification development, at Fernald is warranted

  15. Enseignement Basé sur les Compétences : Manuel d'Application dans le Domaine des Sciences Agronomiques a L'Université d'Abomey-Calavi

    NARCIS (Netherlands)

    Koutinhouin, B.; Hupkes, M.; Gooijer, de G.; Aho, N.; Windmeijer, P.N.

    2011-01-01

    Le présent manuel est produit dans le cadre du Projet d’Appui au Renforcement des Programmes de Formation et de Recherche en Agriculture à la Faculté des Sciences Agronomiques et à l’Ecole Polytechnique d’Abomey-Calavi, financé par le Gouvernement du Royaume des Pays-Bas (Projet NPT/BEN/146). Il est

  16. Jeter des ponts entre les agriculteurs et les supermarchés au ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    3 juil. 2014 ... Eric Smith. Que sont-ils devenus ? Sara Elder a reçu du financement qui lui a permis de poursuivre sur le terrain des travaux de recherche doctorale sur la façon dont les petits exploitants agricoles sont touchés par le fait qu'ils doivent vendre leurs produits à des supermarchés modernes plutôt qu'à des ...

  17. Assurer l'apport des pays du Sud à l'action mondiale | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    10 juin 2016 ... ... des chaînes d'approvisionnement et des systèmes d'information –, la Commission recommande 10 mesures précises en lien avec d'autres initiatives de renforcement des systèmes de santé global. Il est essentiel d'établir de tels liens, car les produits ne représentent qu'une infime partie d'un système de ...

  18. Consommation responsable et perception de produits : au-delà de l’environnement

    Directory of Open Access Journals (Sweden)

    Anne Marchand

    2010-11-01

    Full Text Available This paper presents and discusses some specific results pertaining to a larger study that aimed at examining the perceptions and preferences of identified ‘responsible, sustainable consumers’ with respect to consumer products. Based on empirical data gathered among citizens attempting to follow sustainable lifestyles, the study indicates that the adoption of sustainable consumption patterns is not only motivated by altruistic and environmental considerations, but also, significantly, by perceived personal benefits, including an expected increase in personal and/or familial well-being. These motivations, together with how they unfold into preferences for particular product characteristics, are exposed. While recognising the danger that may represent an understanding of sustainable consumption that merely focuses on individual benefits, the paper concludes that the understanding of such motives, along with their implications for the ways in which products and services are conceived and positioned, may warrant further research as it may represent a key incentive for change towards a more sustainable future.RÉSUMÉCet article présente et discute certains résultats spécifiques provenant d’une étude plus large qui visait à explorer le rapport qu’entretiennent les consommateurs responsables aux biens de consommation. Sur la base de données empiriques collectées auprès de citoyens qui se sont tournés vers des modes de consommation à moindres impacts écologiques, il a été remarqué que l’adoption d’habitudes de « consommation durable » n’est pas seulement motivée par des considérations altruistes et environnementales, mais également par des bénéfices personnels et/ou familiaux perçus, incluant une augmentation attendue du bien-être. Ces dernières motivations, ainsi que la manière avec laquelle elles s’expriment à travers des préférences pour certaines caractéristiques que présentent des produits de

  19. Transportable Vitrification System: Operational experience gained during vitrification of simulated mixed waste

    International Nuclear Information System (INIS)

    Whitehouse, J.C.; Burket, P.R.; Crowley, D.A.; Hansen, E.K.; Jantzen, C.M.; Smith, M.E.; Singer, R.P.; Young, S.R.; Zamecnik, J.R.; Overcamp, T.J.; Pence, I.W. Jr.

    1996-01-01

    The Transportable Vitrification System (TVS) is a large-scale, fully-integrated, transportable, vitrification system for the treatment of low-level nuclear and mixed wastes in the form of sludges, soils, incinerator ash, and similar waste streams. The TVS was built to demonstrate the vitrification of actual mixed waste at U. S. Department of Energy (DOE) sites. Currently, Westinghouse Savannah River Company (WSRC) is working with Lockheed Martin Energy Systems (LMES) to apply field scale vitrification to actual mixed waste at Oak Ridge Reservation's (ORR) K-25 Site. Prior to the application of the TVS to actual mixed waste it was tested on simulated K-25 B and C Pond waste at Clemson University. This paper describes the results of that testing and preparations for the demonstration on actual mixed waste

  20. Study of the A{sub 1}, A{sub 2} and of other mesonic states in {pi}{sup -}p interactions at 11 GeV/c; Etude des tripions A{sub 1}, A{sub 2} et d'autres complexes mesoniques produits dans les interactions {pi}{sup -}p a 11 GeV/c

    Energy Technology Data Exchange (ETDEWEB)

    Kochowski, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-02-01

    Study of the {pi}{sup -} p interactions with at least four bodies in the final states at 11 GeV/c, carried out in the 1.50 m british and in the 2 m CERN liquid hydrogen bubble chambers at the CERN proton synchrotron. One observes a production of the A{sub 1}{sup -} in the {rho}{sup 0} {pi}{sup -} decay mode, of the A{sub 2}{sup -} in the {rho}{sup 0} {pi}{sup -} and {eta} {pi}{sup -} modes, and of the A{sub 3}{sup -} in the dominant f{sup 0} {pi}{sup -} mode. For the {pi}{sup -} p {yields} p {pi}{sup +} {pi}{sup -} {pi}{sup -} reaction, we have checked the validity of the one pion exchange model, which allows the estimation of the background under the A enhancements produced in this reaction. A tentative determination of the J{sup P} quantum numbers for the A{sub 1} and A{sub 2} has been made. (author) [French] Etude des interactions {pi}{sup -} p a au moins quatre corps dans l'etat final, a 11 GeV/c, effectuee a l'aide des chambres a bulles britanniques de 1.50 m et de 2 m du CERN, exposees aupres du synchrotron a protons au CERN. On observe une production de A{sub 1}{sup -} dans le mode {rho}{sup 0} {pi}{sup -}, du A{sub 2} dans les modes {rho}{sup 0} {pi}{sup -} et {eta} {pi}{sup -}, et du A{sub 3}{sup -} dans le mode dominant f{sup 0} {pi}{sup -}. Le modele d'echange d'un pion dont on a mis a l'epreuve la validite pour la reaction {pi}{sup -} p {yields} p {pi}{sup +} {pi}{sup -} {pi}{sup -}, permet de rendre compte du fond present sous ces complexes formes dans la reaction a quatre corps. Une tentative de determination des nombres J{sup P} du A{sub 1} et du A{sub 2} a egalement ete faite. (auteur)

  1. Study of the A{sub 1}, A{sub 2} and of other mesonic states in {pi}{sup -}p interactions at 11 GeV/c; Etude des tripions A{sub 1}, A{sub 2} et d'autres complexes mesoniques produits dans les interactions {pi}{sup -}p a 11 GeV/c

    Energy Technology Data Exchange (ETDEWEB)

    Kochowski, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-02-01

    Study of the {pi}{sup -} p interactions with at least four bodies in the final states at 11 GeV/c, carried out in the 1.50 m british and in the 2 m CERN liquid hydrogen bubble chambers at the CERN proton synchrotron. One observes a production of the A{sub 1}{sup -} in the {rho}{sup 0} {pi}{sup -} decay mode, of the A{sub 2}{sup -} in the {rho}{sup 0} {pi}{sup -} and {eta} {pi}{sup -} modes, and of the A{sub 3}{sup -} in the dominant f{sup 0} {pi}{sup -} mode. For the {pi}{sup -} p {yields} p {pi}{sup +} {pi}{sup -} {pi}{sup -} reaction, we have checked the validity of the one pion exchange model, which allows the estimation of the background under the A enhancements produced in this reaction. A tentative determination of the J{sup P} quantum numbers for the A{sub 1} and A{sub 2} has been made. (author) [French] Etude des interactions {pi}{sup -} p a au moins quatre corps dans l'etat final, a 11 GeV/c, effectuee a l'aide des chambres a bulles britanniques de 1.50 m et de 2 m du CERN, exposees aupres du synchrotron a protons au CERN. On observe une production de A{sub 1}{sup -} dans le mode {rho}{sup 0} {pi}{sup -}, du A{sub 2} dans les modes {rho}{sup 0} {pi}{sup -} et {eta} {pi}{sup -}, et du A{sub 3}{sup -} dans le mode dominant f{sup 0} {pi}{sup -}. Le modele d'echange d'un pion dont on a mis a l'epreuve la validite pour la reaction {pi}{sup -} p {yields} p {pi}{sup +} {pi}{sup -} {pi}{sup -}, permet de rendre compte du fond present sous ces complexes formes dans la reaction a quatre corps. Une tentative de determination des nombres J{sup P} du A{sub 1} et du A{sub 2} a egalement ete faite. (auteur)

  2. Vitrification of high level wastes in France

    International Nuclear Information System (INIS)

    Sombret, C.

    1984-02-01

    A brief historical background of the research and development work conducted in France over 25 years is first presented. Then, the papers deals with the vitrification at (1) the UP1 reprocessing plant (Marcoule) and (2) the UP2 and UP3 reprocessing plants (La Hague). 1) The properties of glass required for high-level radioactive waste vitrification are recalled. The vitrification process and facility of Marcoule are presented. (2) The average characteristics (chemical composition, activity) of LWR fission product solution are given. The glass formulations developed to solidify LWR waste solution must meet the same requirements as those used in the UP1 facility at Marcoule. Three important aspects must be considered with respect to the glass fabrication process: corrosiveness of the molten glass with regard to metals, viscosity of the molten glass, and, volatization during glass fabrication. The glass properties required in view of interim storage and long-term disposal are then largely developed. Two identical vitrification facilities are planned for the site: T7, to process the UP2 throughput, and T7 for the UP3 plant. A prototype unit was built and operated at Marcoule

  3. Algues unicellulaires marines : composition et prospectives.- Xèmes journées européennes de cosmétologie : Produits marins et plantes en thérapeutique et cosmétologie, 27, 28 et 29 janvier 1986

    OpenAIRE

    Lassus, Patrick

    1986-01-01

    Le développement croissant des cultures intensives d'algues unicellulaires marines pour l'aquaculture pose aujourd'hui le problème non seulement de la valeur nutritive de ces organismes mais également des ouvertures possibles vers un marché plus spécialisé en pharmacologie et cosmétologie. En effet, tant au niveau des propriétés étonnantes de certains produits d'excrétions (hydrates de carbone, biotoxines, antibiotiques) que des constituants de base (en particulier lipides et aminoacides) ...

  4. Dynamique des savoirs et des échanges d’un produit de collecte en territoire transfrontalier Dinâmicas de conhecimentos e trocas de uma fruta de palmeira numa região fronteiriça. O caso do açaí (Euterpe oleracea Mart. na região do baixo Oiapoque Dynamics of knowledge and exchanges of a non timber forest product in border territory. The case of açai (Euterpe oleracea Mart. in the Lower Oyapock

    Directory of Open Access Journals (Sweden)

    Laval Pauline

    2012-11-01

    Full Text Available Le palmier wassaï (Euterpe oleracea Mart., aussi appelé açaí au Brésil et pinot en Guyane, est natif du bassin amazonien, en Amérique du Sud. Dans cette région, il est d’une importance alimentaire majeure. En effet, on peut tirer de ses fruits un nectar très riche qui constitue une part importante de la consommation de certains peuples d’Amazonie, notamment pendant la période de fructification du palmier. Ce nectar est désormais à la mode en milieu urbain au Brésil, et s’exporte sous une large gamme de produits dérivés à l’international, grâce à ses vertus énergétiques et anti-oxydantes reconnues. Si la majeure partie de la production et de la transformation de wassaï se déroule à Belém, dans l’Etat du Pará au Brésil, de nombreuses autres filières existent à plus petite échelle, car le fruit comme le nectar, très périssables, supportent mal le transport. Cet article explicite la filière de production du nectar de wassaï du bas Oyapock, région frontalière entre la Guyane française et le Brésil. Nous étudions, du point de vue de l’ethnoécologie, les impacts de la frontière sur la dynamique des savoirs et des échanges du wassaï. Plus de 100 entretiens semi-directifs ont été menés chez les différents groupes ethniques du bas Oyapock, ainsi que des travaux d’observation participante de localisation des zones de croissance du wassaï, et un lexique spécialisé trilingue a été réalisé. Les résultats révèlent une très grande diversité de savoirs, de savoir-faire et d’usages de ce palmier, parmi les 9 groupes ethniques recensés dans la région. Ces usages sont le plus souvent spécifiques à chaque groupe, et en perte de vitesse, sauf la consommation de nectar, qui est commune à tous les groupes ethniques, en augmentation générale. Les savoirs et techniques consacrés à la domestication et à la préparation du nectar sont explicités. Dans le but de comprendre la répartition du

  5. Vitrification of HLW in cold crucible melter

    International Nuclear Information System (INIS)

    Bordier, G.

    2005-01-01

    The performance of the vitrification process currently used in the La Hague commercial reprocessing plants has been continuously improved during more than ten years of operation. In parallel the CEA (French Atomic Energy Commission), COGEMA (Industrial Operator), and SGN (COGEMA's Engineering) have developed the cold crucible melter vitrification technology to obtain greater operating flexibility, increased plant availability and further reduction of secondary waste generated during operations. The cold crucible is a compact water-cooled melter in which the radioactive waste and the glass additives are melted by direct high frequency induction. The cooling of the melter produces a solidified glass layer that protects the melter's inner wall from corrosion. Because the heat is transferred directly to the melt, high operating temperatures can be achieved with no impact on the melter itself. COGEMA plans to implement the cold crucible technology to vitrify high level liquid waste from reprocessed spent U-Mo-Sn-Al fuel (used in gas cooled reactor). The cold crucible was selected for the vitrification of this particularly hard-to-process waste stream because it could not be reasonably processed in the standard hot induction melters currently used at the La Hague vitrification facilities: the waste has a high molybdenum content which makes it very corrosive and also requires a special high temperature glass formulation to obtain sufficiently high waste loading factors (12 % in molybdenum). A special glass formulation has been developed by the CEA and has been qualified through lab and pilot testing to meet standard waste acceptance criteria for final disposal of the U-Mo waste. The process and the associated technologies have been also qualified on a full-scale prototype at the CEA pilot facility in Marcoule. Engineering study has been integrated in parallel in order to take into account that the Cold Crucible should be installed remotely in one of the R7 vitrification

  6. Enquête de satisfaction des restaurants

    CERN Multimedia

    Staff Association

    2016-01-01

    Comité de surveillance des restaurants L’Association du personnel est représentée dans plusieurs comités dont le Comité de surveillance des restaurants (CSR) qui a pour mandat : de donner son avis sur toute question relative à la politique générale de l’Organisation en matière de restauration sur le site, y compris en ce qui concerne les termes et l’attribution des contrats d’exploitation des restaurants ; de définir dans le cadre des contrats d’exploitation des restaurants, les prestations correspondant aux besoins et, dans la mesure du possible, aux désirs du personnel ; de surveiller les prestations des restaurants, y compris en ce qui concerne la qualité et la préparation des produits ; de négocier avec les concessionnaires des restaurants au sujet des tarifs et de surveill...

  7. Le Plan Maroc Vert et l’autosuffisance alimentaire en produits de base à l’horizon 2020

    Directory of Open Access Journals (Sweden)

    Souleymane Nouréini Sayouti

    2015-10-01

    Full Text Available La présente étude a pour objectif d’analyser les effets probables de la nouvelle stratégie agricole marocaine (le Plan Maroc Vert sur la situation alimentaire (dépendance ou autosuffisance alimentaire du Maroc à l’horizon 2020. Elle a concerné sept produits de base indispensables à la diète marocaine à savoir : le lait, le sucre, l’huile de table, la viande rouge, la viande blanche, le blé tendre et le blé dur. L’approche méthodologique utilisée consiste à prévoir la demande alimentaire du pays, pour l’horizon 2020, en ces denrées. La méthode utilisée pour la prévision de la demande prend en compte la taille de la population, l’élasticité-revenu et l’évolution du niveau de revenu par habitant. La demande projetée est comparée aux niveaux de production prévus par le Plan Maroc Vert pour le même horizon. Ces prévisions ont révélé que malgré les efforts d’augmentation des niveaux de production prévus dans le cadre du Plan Maroc Vert, le Maroc ne pourrait pas atteindre une autosuffisance alimentaire pour le blé tendre, le blé dur, le sucre et les huiles de table à l’horizon 2020. Par contre, cette autosuffisance serait possible pour le lait, les viandes rouges et les viandes blanches. Ces résultats montrent que les décideurs politiques devraient mieux orienter l’intervention de l’Etat pour améliorer l’offre du pays pour le premier groupe des produits. En revanche, les possibilités d’exportation devraient être encouragées pour le deuxième groupe de produits notamment vers les marchés émergents tels que ceux de l’Afrique Subsaharienne.

  8. Problems and energy choices in Burkina Faso[Energie ; Economie domestique ; Bois de feu ; Produits petroliers ; Legislation fonciere ; Electricite]; Burkina : Problemes et choix energetiques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-01-15

    This document is about the evaluation of the energy sector in Burkina Faso. It reports about the main issues of energy: poverty of the households, the lack of fund to finance the sector, desertification...The main resources of energy are firewood, fuel and electricity. The energy needs of Burkina Faso are related to the cooking of food, with liquid fuels intended for the railway transport and fuels used in industry and for the production of electricity. With regard to the transport sector, there is currently no possibility of substitution for the fuel, except the use of ethanol diluted in the gasoline. At the industrial level, agro-industrial, bagasse and the other residues constitute right now the independent source of energy for the production of industrial heat as well as for that of electricity. For the public network of electricity supply, the production rests exclusively on diesel power stations. Regarding the immense needs for its populations in energy, Burkina has only very limited resources. The biomass used for domestic needs cannot continuously ensure the households with the necessary energy supply for food cooking. As for the agro-industrial residues, they cannot reduce the industrial consumption of fuels. There are also hydraulic resources whose conscientious exploitation could contribute to decrease the fuel consumption in terms of electricity. In sum, it would be necessary to improve the regulation as regards firewood supply, to promote the use of improved hearths with wood, to plan the fuel supplies and to assist the SONABEL in the electric production capacities reinforcement of its fuel-based power stations. [French] Ce document traite de l evaluation du secteur de l energie au Burkina. Il fait etat des principaux problemes energetiques : pauvrete des menages, manque de financement dans le secteur, desertification... Les principales ressources energetiques sont le bois de feu, les produits petroliers et l electricite. Les besoins energetiques du

  9. Des communautés microbiennes au service de la qualité des fromages : diversité et dynamique adaptative et fonctionnelle des populations endogènes et ensemencées

    OpenAIRE

    Delbes, Céline; Monnet, Christophe; Irlinger, Francoise

    2015-01-01

    Les fromages traditionnels hébergent un microbiote diversifié, composé de populations microbiennes endogènes et de ferments, qui joue un rôle majeur dans le développement des qualités sanitaires et sensorielles du produit fini. La connaissance de la diversité microbienne taxonomique et fonctionnelle des produits laitiers s’enrichit depuis ces trois dernières années des apports des approches (méta)génomiques. Plus de 100 genres et 400 espèces microbiennes ont été détectés dans le lait cru et l...

  10. Digital microfluidic processing of mammalian embryos for vitrification.

    Directory of Open Access Journals (Sweden)

    Derek G Pyne

    Full Text Available Cryopreservation is a key technology in biology and clinical practice. This paper presents a digital microfluidic device that automates sample preparation for mammalian embryo vitrification. Individual micro droplets manipulated on the microfluidic device were used as micro-vessels to transport a single mouse embryo through a complete vitrification procedure. Advantages of this approach, compared to manual operation and channel-based microfluidic vitrification, include automated operation, cryoprotectant concentration gradient generation, and feasibility of loading and retrieval of embryos.

  11. Vitrification in the presence of salts

    International Nuclear Information System (INIS)

    Marra, J.C.; Andrews, M.K.; Schumacher, R.F.

    1994-01-01

    Glass is an advantageous material for the immobilization of nuclear wastes because of the simplicity of processing and its unique ability to accept a wide variety of waste elements into its network structure. Unfortunately, some anionic species which are present in the nuclear waste streams have only limited solubility in oxide glasses. This can result in either vitrification concerns or it can affect the integrity, of the final vitrified waste form. The presence of immiscible salts can also corrode metals and refractories in the vitrification unit as well as degrade components in the off-gas system. The presence of a molten salt layer on the melt may alter the batch melting rate and increase operational safety concerns. These safety concerns relate to the interaction of the molten salt and the melter cooling fluids. Some preliminary data from ongoing experimental efforts examining the solubility of molten salts in glasses and the interaction of salts with melter component materials is included

  12. Hanford Waste Vitrification Project overview and status

    International Nuclear Information System (INIS)

    Swenson, L.D.; Smets, J.L.

    1993-01-01

    The Hanford Waste Vitrification Project (HWVP) is being constructed at the US DOE's Hanford Site in Richland, WA. Engineering and design are being accomplished by Fluor Daniel Inc. in Irvine, CA. Technical input is furnished by Westinghouse Hanford Co. and construction management services by UE ampersand C-Catalytic Inc. The HWVP will immobilize high level nuclear waste in a glass matrix for eventual disposal in the federal repository. The HWVP consists of several structures, the major ones being the Vitrification Building, the Canister Storage Building, fan house, sand filter, waste hold tank, pump house, and administration and construction facilities. Construction started in April 1992 with the clearing and grubbing activities that prepared the site for fencing and construction preparation. Several design packages have been released for procurement activities. The most significant package release is for the Canister Storage Building, which will be the first major structure to be constructed

  13. Vitrification technology for Hanford Site tank waste

    International Nuclear Information System (INIS)

    Weber, E.T.; Calmus, R.B.; Wilson, C.N.

    1995-04-01

    The US Department of Energy's (DOE) Hanford Site has an inventory of 217,000 m 3 of nuclear waste stored in 177 underground tanks. The DOE, the US Environmental Protection Agency, and the Washington State Department of Ecology have agreed that most of the Hanford Site tank waste will be immobilized by vitrification before final disposal. This will be accomplished by separating the tank waste into high- and low-level fractions. Capabilities for high-capacity vitrification are being assessed and developed for each waste fraction. This paper provides an overview of the program for selecting preferred high-level waste melter and feed processing technologies for use in Hanford Site tank waste processing

  14. Actual point about fission products vitrification

    International Nuclear Information System (INIS)

    Bonniaud, R.

    1982-05-01

    The main characteristics concerning the continuous vitrification process for the confinement of fission product solutions operated at AVM are summarized. The general principle of a vitrification plant is described. The AVM plant efficiency as also its conception of consumable parts interchangeability are satisfying. The evolution of the process and its application developped in two ways: a more spaced installation conception and the improvement of the weak points remarked at AVM, as also the capacity of output. Two industrial units are designed at La Hague. The future evolution of the process aims at manufacturing glass at higher temperatures about 1400 degrees Celsius. Some problems remain to be resolved for the using of ceramic melters associated with a calcination unit. The studies provide for a satisfying behaviour for the material to long-term. The risks of damage by crystallisation, leaching and effects of alpha emission are analysed [fr

  15. In situ vitrification of buried waste sites

    International Nuclear Information System (INIS)

    Shade, J.W.; Thompson, L.E.; Kindle, C.H.

    1991-04-01

    In situ vitrification (ISV) is a remedial technology initially developed to treat soils contaminated with a variety of organics, heavy metals, and/or radioactive materials. Recent tests have indicated the feasibility of applying the process to buried wastes including containers, combustibles, and buried metals. In addition, ISV is being considered for application to the emplacement of barriers and to the vitrification of underground tanks. This report provides a review of some of the recent experiences of applying ISV in engineering-scale and pilot-scale tests to wastes containing organics, the Environmental Protection Agency (EPA) Toxic metals buried in sealed containers, and buried ferrous metals, with emphasis on the characteristics of the vitrified product and adjacent soil. 9 refs., 2 figs., 3 tabs

  16. Hanford Waste Vitrification Plant dangerous waste permit application

    International Nuclear Information System (INIS)

    1991-10-01

    This report presents engineering drawings of the vitrification plant at Hanford Reservation. Individual sections in the report cover piping and instrumentation, process flow schemes, and material balance tables

  17. India gets set at Tarapur [vitrification plant

    International Nuclear Information System (INIS)

    Cruickshank, Andrew.

    1987-01-01

    A vitrification plant has been built and commissioned at Tarapur to immobilise high level radioactive waste arising from the reprocessing plant. The plant employs a semi-continuous pot-glass process, involving calcination followed by melting in the processing vessel and subsequent casting of the glass in a storage container. Prior to disposal the waste is stored in an air-cooled vault with a convective air-circulation system. (author)

  18. Vitrification of spent mordenite molecular sieves

    International Nuclear Information System (INIS)

    Sathi Sasidharan, N.; Deshingkar, D.S.; Jain, Savita; Singh, I.J.; Wattal, P.K.

    2002-11-01

    Vitrification of cesium loaded inorganic ion exchangers (mordenite type molecular sieves/zeolite AR-1) was studied empolying borosilicate glass systems. Direct vitrification of aluminosilicates is rather difficult mainly on account of volatility of cesium at processing temperatures of 1100 degC-1300 degC. In the borosilicate glass system, oxides of lead, sodium and zinc along with boric oxide were employed as major glass formers. Homogeneous glass matrix was obtained incorporating simulated composition of mordenite along with oxides of sodium, lead and boron at the processing temperature of 950 degC. The waste oxide loading up to 50% on dry weight basis was incorporated in this glass formulation. Partial replacement of PbO by TeO 2 , Bi 2 O 3 and CaF 2 resulted in lowering of the processing temperature and also increasing homogeneity of matrix. Based on these results, a glass matrix was prepared with actual cesium AR-1 molecular sieves with processing temperature limited to 925 degC. Powdered samples of glass matrix were subjected to leaching as per ASTM-1285 Product Consistency Test in high purity water at 90 degC for 28 days. The normalised cesium leach rate of this glass was found to be 3.92 x 10 -6 g/cm 2 /day, which is comparable to sodium borosilicate glass matrices currently in use for immobilisation of high level waste. The molecular sieves are also amenable to immobilization in cement matrix. As expected, there is substantial volume reduction by factor 3 in vitrification compared to their immobilization in cementious matrices. Also the quantity of cesium leached from vitrified product was nearly 10,000 times lower compared to cement based matrix. Vitrification of mordenite molecular sieves would lead to high capacity utilisation of zeolite AR-1 for the treatment of low and intennediate levelliquid effluents. (author)

  19. Hanford Waste Vitrification Plant applied technology plan

    International Nuclear Information System (INIS)

    Kruger, O.L.

    1990-09-01

    This Applied Technology Plan describes the process development, verification testing, equipment adaptation, and waste form qualification technical issues and plans for resolution to support the design, permitting, and operation of the Hanford Waste Vitrification Plant. The scope of this Plan includes work to be performed by the research and development contractor, Pacific Northwest Laboratory, other organizations within Westinghouse Hanford Company, universities and companies with glass technology expertise, and other US Department of Energy sites. All work described in this Plan is funded by the Hanford Waste Vitrification Plant Project and the relationship of this Plan to other waste management documents and issues is provided for background information. Work to performed under this Plan is divided into major areas that establish a reference process, develop an acceptable glass composition envelope, and demonstrate feed processing and glass production for the range of Hanford Waste Vitrification Plant feeds. Included in this work is the evaluation and verification testing of equipment and technology obtained from the Defense Waste Processing Facility, the West Valley Demonstration Project, foreign countries, and the Hanford Site. Development and verification of product and process models and other data needed for waste form qualification documentation are also included in this Plan. 21 refs., 4 figs., 33 tabs

  20. Hanford Waste Vitrification Plant capacity increase options

    International Nuclear Information System (INIS)

    Larson, D.E.

    1996-04-01

    Studies are being conducted by the Hanford Waste Vitrification Plant (HWVP) Project on ways to increase the waste processing capacity within the current Vitrification Building structural design. The Phase 1 study on remote systems concepts identification and extent of capacity increase was completed. The study concluded that the HWVP capacity could be increased to four times the current capacity with minor design adjustments to the fixed facility design, and the required design changes would not impact the current footprint of the vitrification building. A further increase in production capacity may be achievable but would require some technology development, verification testing, and a more systematic and extensive engineering evaluation. The primary changes included a single advance melter with a higher capacity, new evaporative feed tank, offgas quench collection tank, ejector venturi scrubbers, and additional inner canister closure station,a smear test station, a new close- coupled analytical facility, waste hold capacity of 400,000 gallon, the ability to concentrate out-of-plant HWVP feed to 90 g/L waste oxide concentration, and limited changes to the current base slab construction package

  1. Hanford Waste Vitrification Plant Technology Plan

    International Nuclear Information System (INIS)

    Sexton, R.A.

    1988-06-01

    The reference Hanford plan for disposal of defense high-level waste is based on waste immobilization in glass by the vitrification process and temporary vitrified waste storage at the Hanford Site until final disposal in a geologic repository. A companion document to the Hanford Waste Management Plan (HWMP) is the Draft, Interim Hanford Waste Management Technology Plan (HWMTP), which provides a description of the technology that must be developed to meet the reference waste management plan. One of the issues in the HWMTP is DST-6, Immobilization (Glass). The HWMTP includes all expense funding needed to complete the Hanford Waste Vitrification Plant (HWVP) project. A preliminary HWVP Technology Plan was prepared in 1985 as a supporting document to the HWMTP to provide a more detailed description of the technology needed to construct and operate a vitrification facility. The plan was updated and issued in 1986, and revised in 1987. This document is an annual update of the plan. The HWVP Technology Plan is limited in scope to technology that requires development or confirmation testing. Other expense-funded activities are not included. The relationship between the HWVP Technology Plan and other waste management issues addressed in the HWMTP is described in section 1.6 of this plan. 6 refs., 4 figs., 34 tabs

  2. Successful ongoing pregnancies after vitrification of oocytes.

    Science.gov (United States)

    Lucena, Elkin; Bernal, Diana Patricia; Lucena, Carolina; Rojas, Alejandro; Moran, Abby; Lucena, Andrés

    2006-01-01

    To demonstrate the efficiency of vitrifying mature human oocytes for different clinical indications. Descriptive case series. Cryobiology laboratory, Centro Colombiano de Fertilidad y Esterilidad-CECOLFES LTDA. (Bogotá, Colombia). Oocyte vitrification was offered as an alternative management for patients undergoing infertility treatment because of ovarian hyperstimulation syndrome, premature ovarian failure, natural ovarian failure, male factor, poor response, or oocyte donation. Mature oocytes were obtained from 33 donor women and 40 patients undergoing infertility treatment. Oocytes were retrieved by ultrasound-guided transvaginal aspiration and vitrified with the Cryotops method, with 30% ethylene glycol, 30% dimethyl sulfoxide, and 0.5 mol/L sucrose. Viability was assessed 3 hours after thawing. The surviving oocytes were inseminated by intracytoplasmic sperm injection. Fertilization was evaluated after 24 hours. The zygotes were further cultured in vitro for up to 72 hours until time of embryo transfer. Recovery, viability, fertilization, and pregnancy rates. Oocyte vitrification with the Cryotop method resulted in high rates of recovery, viability, fertilization, cleavage, and ongoing pregnancy. Vitrification with the Cryotop method is an efficient, fast, and economical method for oocyte cryopreservation that offers high rates of survival, fertilization, embryo development, and ongoing normal pregnancies, providing a new alternative for the management of female infertility.

  3. Plasma vitrification program for radioactive waste treatment

    International Nuclear Information System (INIS)

    Hung, Tsungmin; Tzeng, Chinchin; Kuo, Pingchun

    1998-01-01

    In order to treat radioactive wastes effectively and solve storage problems, INER has developed the plasma arc technology and plasma process for various waste forms for several years. The plasma vitrification program is commenced via different developing stages through nine years. It includes (a) development of non-transferred DC plasma torch, (b) establishment of a lab-scale plasma system with home-made 100kW non-transferred DC plasma torch, (c) testing of plasma vitrification of simulated radioactive wastes, (d) establishment of a transferred DC plasma torch delivering output power more than 800 kW, (e) study of NOx reduction process for the plasma furnace, (f) development of a pilot-scale plasma melting furnace to verify the vitrification process, and (g) constructing a plasma furnace facility in INER. The final goal of the program is to establish a plasma processing plant with capacity of 250 kg/hr to treat the low-level radioactive wastes generated from INER itself and domestic institutes due to isotope applications. (author)

  4. Handling and Separation of Short-Lived Radioisotopes from Research Reactors; Manipulation et Separation des Radioisotopes a Courte Periode Produits dans des Reacteurs de Recherche; ПОЛУЧЕНИЕ И ОТДЕЛЕНИЕ КОРОТКОЖИВУЩИХ ИЗОТОПОВ В ИССЛЕДОВАТЕЛЬСКИХ РЕАКТОРАХ; Manipulacion y Separacion de Radioisotopos de Periodo Corto Obtenidos en Reactores de Investigacion

    Energy Technology Data Exchange (ETDEWEB)

    Meinke, W. W. [University of Michigan, Ann Arbor, MI (United States)

    1963-03-15

    distillation, selective reduction, etc., also add to the variety of separation possibilities to be explored. The local research reactor, whether it is in a university in the United States, or in a developing country, thus opens a whole new era of tracer possibilities. (author) [French] L'emploi des radioisotopes a souvent ete limite aux radioisotopes dont la periode est superieure a un jour, etant donne l'eloignement du reacteur qui les produit. Ceci explique un certain manque d'interet a l'egard du traitement et de l'utilisation de ces radioisotopes, et par suite une certaine reticence de la part du consommateur a envisager meme les possibilites d'emploi de nombreux radioisotopes a courte periode. Comme il existe maintenant de nombreux reacteurs de recherche dans le monde, les laboratoires ne dependent plus de producteurs de radioisotopes eloignes; en outre, les radioisotopes a courte periode couvrent de nombreux champs d'experimentation nouveaux. Il importe, cependant, a cette fin de considerer la production des radioindicateurs sous un angle nouveau. Depuis pres de cinq annees, le programme execute au moyen du reacteur de recherche de l'Universite du Michigan comporte la manipulation, le traitement et la mesure de radioisotopes a courte periode. Les chercheurs de l'Universite emploient couramment des radioisotopes dont les periodes ne depassent pas plusieurs heures, voire quelques minutes. Les traveaux entrepris jusqu'a present avaient trait principalement a l'analyse par activation, mais le material, les methodes et les techniques utilises.peuvent s'appliquer a de nombreux autres domaines. Pour utiliser les radioisotopes a courte periode, il n'est pas necessaire de prevoir un roulement de trois equipes pour le reacteur; il n'est pas lion plus indispensable de disposer de stocks importants de radioisotopes, ni d'installations de traitement perfectionnees.En fait, de simples pinces, utilisees de la maniere courante, donnent generalement de meilleurs resultats que de

  5. Vitrification: a solution for the wastes of wastes; La vitrification: ca chauffe pour les ultimes

    Energy Technology Data Exchange (ETDEWEB)

    Guihard, B. [Europlasma, 33 - Saint Medard en Jalles (France)

    1997-07-01

    The incineration of wastes generates other wastes (fly ashes) that concentrate a large amount of polluting substances (heavy metals, salts..). French law requires a stabilization of this kind of wastes before their storage. Today vitrification can be considered as an alternative to the stabilization and storage way, the vitrified products could be seen as an interesting material in the building industry or in road works. A few years ago the municipality of Bordeaux decided to launch a demonstration program and a REFIOM (fly ashes) vitrification unit has been operating since 1997. (A.C.)

  6. La production mondiale des vins

    Directory of Open Access Journals (Sweden)

    Pierre GALET

    1969-09-01

     Le continent européen constitue le principal foyer de la culture de la vigne. Il vient en tête, non seulement par l'importance de la superficie cultivée, mais également par le volume global de la récolte et par la qualité des produits qui y sont récoltés : vins fins rouges, rosés et blancs, vins mousseux, vins de dessert ou vins généreux, eaux-de-vie, raisins de table frais et raisins secs. Les pays européens sont également les principaux consommateurs de vins du monde et la majeure partie des échanges commerciaux se font vers l'Europe ou partent de ce continent.

  7. Concours annuels Academie Royale des Sciences d'Outre-mer

    Directory of Open Access Journals (Sweden)

    Royal Academy for Overseas Sciences

    2011-01-01

    Full Text Available Yearly competitions Royal Academy for Overseas Sciences. L'Organisation des Nations Unies, face aux inégalités croissantes a initié le processus des Objectifs du Millénaire pour le Développement (OMD qui doivent être réalisés d'ici 2015. L'atteinte des huit OMD devrait permettre de réduire la pauvreté et d'améliorer les conditions de vie des populations. L'élevage est pratiqué par une grande partie de la population mondiale surtout les plus pauvres. Il est pourvoyeur d'emplois et contribue à l'émancipation des femmes grâce aux revenus générés par la vente des produits animaux. Les animaux d'élevage sont également utilisés pour le transport et la culture attelée. La forte densité en nutriments des produits animaux en fait des aliments de choix pour améliorer l'état nutritionnel des enfants. La domestication des espèces animales sauvages et le développement de l'aquaculture contribuent à réduire les prélèvements dans la nature et à protéger la biodiversité. Le développement d'un élevage durable et raisonné peut donc positivement impacter plusieurs secteurs et doper la croissance économique des pays. Ce qui peut aider les pays en développement à se rapprocher des OMD d'ici 2015. La note présente également les pré-requis pour rendre effective la contribution de l'élevage aux.

  8. Engineering report of plasma vitrification of Hanford tank wastes

    International Nuclear Information System (INIS)

    Hendrickson, D.W.

    1995-01-01

    This document provides an analysis of vendor-derived testing and technology applicability to full scale glass production from Hanford tank wastes using plasma vitrification. The subject vendor testing and concept was applied in support of the Hanford LLW Vitrification Program, Tank Waste Remediation System

  9. Effet des opérations unitaires d'extraction sur le rendement et la ...

    African Journals Online (AJOL)

    SARAH

    28 févr. 2015 ... J. Appl. Biosci. Effet des opérations unitaires d'extraction sur le rendement et la qualité du beurre de Pentadesma butyracea produit en milieu traditionnel au Bénin. 7977. Effect of unit operations on the extraction yield and quality of the Pentadesma butyracea butter produced in traditional areas of Benin.

  10. Approches de l'utilisation des eaux usées urbaines dans l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    8 févr. 2011 ... Quant aux systèmes de traitement des eaux financés par le CRDI qui utilisent la laitue d'eau à Dakar ... les eaux usées dans les cultures de salade, produit qui se mange cru. » .... Rompre le cycle de la pauvreté urbaine.

  11. Hausse des taxes sur le tabac dans trois pays d'Amérique centrale ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les chercheurs mèneront des études sur la demande de produits du tabac dans le ... sur les techniques modernes de contrôle de la chaîne d'approvisionnement, ... IWRA/CRDI sur les changements climatiques et la gestion adaptive de l'eau.

  12. Original Paper Typologie et rentabilité des systèmes de production ...

    African Journals Online (AJOL)

    d'affaire du secteur primaire après les produits avicoles avec 9,7% .... Les autres dépenses (eau, soins ... (Enseignement général) sous des formes et à ...... bovins laitiers en zone montagneuse d'Algérie. Revue d'Elevage et de. Médecine.

  13. Production des micro-algues des claires ostréicoles en relation avec l'azote organique dissous excrété par les huîtres

    OpenAIRE

    Robert, Jean-michel; Maestrini, Serge; Heral, Maurice; Zanette, Yvan

    1981-01-01

    L'utilisation de tests biologiques dans l'étude de la fertilité des eaux de claires ainsi que l'analyse chimique des réserves en sels nutritifs des mêmes eaux montrent qu'une part importante de la biomasse micro-algale peut être produite dans ces bassins, par assimilation par les cellules de substances organiques dissoutes. Ainsi, pour l'azote, des estimations indirectes aboutissent à des quantités de cet élément assimilé sous forme organique variant entre 0,6 et 30,7 µg-at.I-1 selon les mode...

  14. A study on safety assessment methodology for a vitrification plant

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Y. C.; Lee, G. S.; Choi, Y. C.; Kim, G. H. [Yonsei Univ., Seoul (Korea, Republic of)

    2002-03-15

    In this study, the technical and regulatory status of radioactive waste vitrification technologies in foreign and domestic plants is investigated and analyzed, and then significant factors are suggested which must be contained in the final technical guideline or standard for the safety assessment of vitrification plants. Also, the methods to estimate the stability of vitrified waste forms are suggested with property analysis of them. The contents and scope of the study are summarized as follows : survey of the status on radioactive waste vitrification technologies in foreign and domestic plants, survey of the characterization methodology for radioactive waste form, analysis of stability for vitrified waste forms, survey and analysis of technical standards and regulations concerned with them in foreign and domestic plants, suggestion of significant factors for the safety assessment of vitrification plants, submission of regulated technical standard on radioactive waste vitrification plats.

  15. 109 Composition chimique et propriétés antibactériennes des huiles ...

    African Journals Online (AJOL)

    NGOM

    2Laboratoire des Produits Naturels (LPN), Département de chimie, Faculté des sciences et techniques, .... analytique, la technique a été améliorée par la mise en ligne deux colonnes capillaires de polarité différente ... couplage CPG/SM a été réalisé sur colonne capillaire en silice fondue (25 m x 0,23 x 0,25 µm) avec de.

  16. Etat Des Lieux De La Reglementation Relative A L'homologation ...

    African Journals Online (AJOL)

    Notre étude a comporté d'une part une revue de textes législatifs et réglementaires sur les laits infantiles tant au plan national qu'international et une phase d'enquête transversale dans le district d'Abidjan, auprès des officines privées de pharmacie et des grossistes répartiteurs privés de produits pharmaceutiques.Il ressort ...

  17. Fertilisation et sensibilité des cultures de laitue et de tomate aux bioagresseurs

    OpenAIRE

    Julhia, L.; Nicot, Philippe C.

    2014-01-01

    Les producteurs de légumes sont confrontés à de nouveaux défis avec la réduction de l’usage des produits phytosanitaires. Limiter le recours aux moyens de lutte chimique conduit à revisiter les pratiques et à mettre en oeuvre des stratégies globales à moindre risque phytosanitaire. La fertilisation est examinée dans son action sur la santé des plantes et comme levier dans la gestion des bioagresseurs. L’étude porte sur deux cultures légumières majeures en France, en termes de surfaces, la lai...

  18. Transportable Vitrification System Demonstration on Mixed Waste

    International Nuclear Information System (INIS)

    Zamecnik, J.R.; Whitehouse, J.C.; Wilson, C.N.; Van Ryn, F.R.

    1998-01-01

    This paper describes preliminary results from the first demonstration of the Transportable Vitrification System (TVS) on actual mixed waste. The TVS is a fully integrated, transportable system for the treatment of mixed and low-level radioactive wastes. The demonstration was conducted at Oak Ridge's East Tennessee Technology Park (ETTP), formerly known as the K-25 site. The purpose of the demonstration was to show that mixed wastes could be vitrified safely on a 'field' scale using joule-heated melter technology and obtain information on system performance, waste form durability, air emissions, and costs

  19. Mixed Wastes Vitrification by Transferred Plasma

    International Nuclear Information System (INIS)

    Tapia-Fabela, J.; Pacheco-Pacheco, M.; Pacheco-Sotelo, J.; Torres-Reyes, C.; Valdivia-Barrientos, R.; Benitez-Read, J.; Lopez-Callejas, R.; Ramos-Flores, F.; Boshle, S.; Zissis, G.

    2007-01-01

    Thermal plasma technology provides a stable and long term treatment of mixed wastes through vitrification processes. In this work, a transferred plasma system was realized to vitrify mixed wastes, taking advantage of its high power density, enthalpy and chemical reactivity as well as its rapid quenching and high operation temperatures. To characterize the plasma discharge, a temperature diagnostic is realized by means of optical emission spectroscopy (OES). To typify the morphological structure of the wastes samples, scanning electron microscopy (SEM), and X-ray diffraction (XRD) techniques were applied before and after the plasma treatment

  20. Hanford Waste Vitrification Plant technology progress

    International Nuclear Information System (INIS)

    Wolfe, B.A.; Scott, J.L.; Allen, C.R.

    1989-10-01

    The Hanford Waste Vitrification Plant (HWVP) is currently being designed to safely process and temporarily store immobilized defense liquid high-level wastes from the Hanford Site. These wastes will be immobilized in a borosilicate glass waste form in the HWVP and stored onsite until a qualified geologic waste repository is ready for permanent disposal. Because of the diversity of wastes to be disposed of, specific technical issues are being addressed so that the plant can be designed and operated to produce a waste form that meets the requirements for permanent disposal in a geologic repository. This paper reports the progress to date in addressing these issues. 2 figs., 3 tabs

  1. Commercial Ion Exchange Resin Vitrification Studies

    International Nuclear Information System (INIS)

    Cicero-Herman, C.A

    2002-01-01

    In the nuclear industry, ion exchange resins are used for purification of aqueous streams. The major contaminants of the resins are usually the radioactive materials that are removed from the aqueous streams. The use of the ion exchange resins creates a waste stream that can be very high in both organic and radioactive constituents. Therefore, disposal of the spent resin often becomes an economic problem because of the large volumes of resin produced and the relatively few technologies that are capable of economically stabilizing this waste. Vitrification of this waste stream presents a reasonable disposal alternative because of its inherent destruction capabilities, the volume reductions obtainable, and the durable product that it produces

  2. Volatilité des prix et régulation des marchés. Instruments de gestion du risque

    OpenAIRE

    Cordier, Jean

    2014-01-01

    La présentation porte d'abord sur une présentation de la volatilité des prix, définition et estimation pour les principaux produits agricoles. La seconde partie développe le concept d'efficience des marchés, dans les trois dimensions du marché physique (espace, forme et temps). Le marché de gré à gré, dit OTC en anglais, est décrit dans sa dimension physique puis financière. Les nouveaux instruments d'investissement sur les produits agricoles sont alors introduits pour évoquer la volatilité e...

  3. A project for storing the radioactive sludges from Marcoule in the soil (1960); Une solution de stockage dans le sol des boues radioactives de Marcoule (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, P; Gailledreau, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    A study of the feasibility of storing radioactive sludges in the soil. Special attention is paid to the case of the Marcoule plant, producing three kinds of sludges. The movement of the different fission products is given. (author) [French] Etude de la possibilite de stocker dans le sol des boues radioactives. Le cas de la station de traitement des effluents de Marcoule, produisant trois types de boues, est etudie plus specialement. Le mouvement des divers produits de fission est precise. (auteur)

  4. impacts des rejets industriels sur les eaux souterraines

    African Journals Online (AJOL)

    USER

    pollution et sont nombreuses, notamment les usines sidérurgiques, métalliques et pétrochimiques. Leurs rejets ont des effets néfastes sur les eaux de la région. Actuellement, les effluents industriels situés dans la région de Berrahal, contiennent d'importantes quantités de produits chimiques organiques et inorganiques et ...

  5. Ouvrir la voie à des solutions audacieuses | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    3 nov. 2010 ... Le commerce international des produits agricoles a augmenté depuis la création de l'Organisation mondiale du commerce (OMC) il y a 15 ans, mais beaucoup de pays en développement n'en tirent aucun avantage. N'ayant pas les moyens de se conformer aux normes plus sévères établies pour assurer ...

  6. Vitrification of organics-containing wastes

    International Nuclear Information System (INIS)

    Bickford, D.F.

    1997-01-01

    A process is described for stabilizing organics-containing waste materials and recovering metals therefrom, and a waste glass product made according to the process is also disclosed. Vitrification of wastes such as organic ion exchange resins, electronic components and the like can be accomplished by mixing at least one transition metal oxide with the wastes, and, if needed, glass formers to compensate for a shortage of silicates or other glass formers in the wastes. The transition metal oxide increases the rate of oxidation of organic materials in the wastes to improve the composition of the glass-forming mixture: at low temperatures, the oxide catalyzes oxidation of a portion of the organics in the waste; at higher temperatures, the oxide dissolves and the resulting oxygen ions oxidize more of the organics; and at vitrification temperatures, the metal ions conduct oxygen into the melt to oxidize the remaining organics. In addition, the transition metal oxide buffers the redox potential of the glass melt so that metals such as Au, Pt, Ag, and Cu separate from the melt in the metallic state and can be recovered. After the metals are recovered, the remainder of the melt is allowed to cool and may subsequently be disposed of. The product has good leaching resistance and can be disposed of in an ordinary landfill, or, alternatively, used as a filler in materials such as concrete, asphalt, brick and tile. 1 fig

  7. Innovative technology summary report: Transportable vitrification system

    International Nuclear Information System (INIS)

    1998-09-01

    At the end of the cold war, many of the Department of Energy's (DOE's) major nuclear weapons facilities refocused their efforts on finding technically sound, economic, regulatory compliant, and stakeholder acceptable treatment solutions for the legacy of mixed wastes they had produced. In particular, an advanced stabilization process that could effectively treat the large volumes of settling pond and treatment sludges was needed. Based on this need, DOE and its contractors initiated in 1993 the EM-50 sponsored development effort required to produce a deployable mixed waste vitrification system. As a consequence, the Transportable Vitrification System (TVS) effort was undertaken with the primary requirement to develop and demonstrate the technology and associated facility to effectively vitrify, for compliant disposal, the applicable mixed waste sludges and solids across the various DOE complex sites. After 4 years of development testing with both crucible and pilot-scale melters, the TVS facility was constructed by Envitco, evaluated and demonstrated with surrogates, and then successfully transported to the ORNL ETTP site and demonstrated with actual mixed wastes in the fall of 1997. This paper describes the technology, its performance, the technology applicability and alternatives, cost, regulatory and policy issues, and lessons learned

  8. Hanford Waste Vitrification Plant hydrogen generation

    International Nuclear Information System (INIS)

    King, R.B.; King, A.D. Jr.; Bhattacharyya, N.K.

    1996-02-01

    The most promising method for the disposal of highly radioactive nuclear wastes is a vitrification process in which the wastes are incorporated into borosilicate glass logs, the logs are sealed into welded stainless steel canisters, and the canisters are buried in suitably protected burial sites for disposal. The purpose of the research supported by the Hanford Waste Vitrification Plant (HWVP) project of the Department of Energy through Battelle Pacific Northwest Laboratory (PNL) and summarized in this report was to gain a basic understanding of the hydrogen generation process and to predict the rate and amount of hydrogen generation during the treatment of HWVP feed simulants with formic acid. The objectives of the study were to determine the key feed components and process variables which enhance or inhibit the.production of hydrogen. Information on the kinetics and stoichiometry of relevant formic acid reactions were sought to provide a basis for viable mechanistic proposals. The chemical reactions were characterized through the production and consumption of the key gaseous products such as H 2 . CO 2 , N 2 0, NO, and NH 3 . For this mason this research program relied heavily on analyses of the gases produced and consumed during reactions of the HWVP feed simulants with formic acid under various conditions. Such analyses, used gas chromatographic equipment and expertise at the University of Georgia for the separation and determination of H 2 , CO, CO 2 , N 2 , N 2 O and NO

  9. La quête des températures ultrabasses

    OpenAIRE

    Suchet , Daniel

    2018-01-01

    International audience; Des vendeurs de glace à l'industrie cryogénique, le froid est souvent perçu comme un produit. Pour le physicien, le froid, réduction de l'agitation aléatoire des particules, apparaît plutôt comme une force productrice, capable de faire émerger des structures complexes et de métamorphoser les propriétés des objets. Les basses températures ont été l'enjeu d'une course effrénée dont la première phase a pris fin en 1908 avec la liquéfaction de l'ensemble des gaz connus. Lo...

  10. Solidification and vitrification life-cycle economics study

    International Nuclear Information System (INIS)

    Gimpel, R.F.

    1992-01-01

    Solidification (making concrete) and vitrification (making glass) are frequently the treatment methods recommended for treating inorganic or radioactive wastes. Solidification is generally perceived as the most economical treatment method, whereas vitrification is considered (by many) as the most effective of all treatment methods. Unfortunately, vitrification has acquired the stigma that it is too expensive to receive further consideration as an alternative to solidification in high volume treatment applications. Ex situ solidification and vitrification are the competing methods for treating in excess of 450,000 m 3 of low-level radioactive and mixed waste at the Fernald Environmental Management Project (FEMP or simply, Fernald) located near Cincinnati, Ohio. This paper s a detailed study done to: compare the economics of the solidification and vitrification processes; determine if the stigma assigned to vitrification is warranted; determine if investing millions of dollars into vitrification development, along with solidification development, at Fernald is warranted. Common parameters were determined and detailed life-cycle cost estimates were made. Incorporating the unit costs into a computer spreadsheet allowed 'what if' scenarios to be performed. Some scenarios investigated included variation of: remediation times, amount of wastes treated, treatment efficiencies, electrical and material costs and escalation

  11. Libération des acides gras par autolyse enzymatique des triglycérides des graines oléoprotéagineuses

    Directory of Open Access Journals (Sweden)

    Alibert Gilbert

    2001-01-01

    Full Text Available Les acides gras produits par hydrolyse chimique des lipides des plantes sont des matériaux de base pour l’industrie des biocarburants, des lubrifiants, des plastiques, des détergents et également des adjuvants de préparations commerciales d’herbicides. Cependant les procédés actuels de production des acides gras sont hautement polluants et coûteux en énergie. Dans ce travail nous développons un nouveau procédé de production des acides gras mettant en œuvre des plantes génétiquement modifiées. Nous avons introduit dans le tabac, retenu comme plante modèle, une construction génétique comprenant un gène de lipase (de la levure Geotrichum candidum sous le contrôle d’un promoteur graine spécifique (promoteur AtEm1 d’Arabidopsis thaliana. Ce promoteur devrait permettre l’expression du gène de lipase au niveau de l’axe embryonnaire tandis que les lipides s’accumulent dans les corps lipidiques des cotylédons. Dans ces conditions, les lipides de la graine devraient être séparés de la lipase par une compartimentation tissulaire et ne pas interférer. Après broyage des graines on peut penser que la mise en contact des lipides et de la lipase conduira à la libération d’acides gras. Plusieurs transformants ont été produits par transfert de gène à l’aide d’Agrobacterium tumefaciens, quelques-uns d’entre eux exprimant, comme attendu, la lipase dans leurs graines. Trois clones (2, 19 et 43 présentent une activité lipase significative et ont été retenus pour des études complémentaires. Cependant l’activité enzymatique observée est faible et certains clones présentent un défaut de compartimentation entre l’enzyme et les lipides se traduisant par la production d’acides gras dans la graine intacte. Lorsque les graines du clone 43 sont broyées dans un tampon, des acides gras sont produits dans le milieu réactionnel, validant le procédé imaginé. De nouvelles constructions réalisées, soit

  12. Prospects for vitrification of mixed wastes at ANL-E

    International Nuclear Information System (INIS)

    Mazer, J.; No, Hyo.

    1993-01-01

    This report summarizes a study evaluating the prospects for vitrification of some of the mixed wastes at ANL-E. This project can be justified on the following basis: Some of ANL-E's mixed waste streams will be stabilized such that they can be treated as a low-level radioactive waste. The expected volume reduction that results during vitrification will significantly reduce the overall waste volume requiring disposal. Mixed-waste disposal options currently used by ANL-E may not be permissible in the near future without treatment technologies such as vitrification

  13. Design of microwave vitrification systems for radioactive waste

    International Nuclear Information System (INIS)

    White, T.L.; Wilson, C.T.; Schaick, C.R.; Bostick, W.D.

    1996-01-01

    Oak Ridge National Laboratory (ORNL) is involved in the research and development of high-power microwave heating systems for the vitrification of DOE radioactive sludges. Design criteria for a continuous microwave vitrification system capable of processing a surrogate filtercake sludge representative of a typical waste-water treatment operation are discussed. A prototype 915 MHz, 75 kW microwave vitrification system or 'microwave melter' is described along with some early experimental results that demonstrate a 4 to 1 volume reduction of a surrogate ORNL filtercake sludge

  14. Design of microwave vitrification systems for radioactive waste

    International Nuclear Information System (INIS)

    White, T.L.; Wilson, C.T.; Schaich, C.R.; Bostick, T.L.

    1995-01-01

    Oak Ridge National Laboratory (ORNL) is involved in the research and development of high-power microwave heating systems for the vitrification of Department of Energy (DOE) radioactive sludges. Design criteria for a continuous microwave vitrification system capable of processing a surrogate filtercake sludge representative of a typical waste-water treatment operation are discussed. A prototype 915-MHz, 75-kW microwave vitrification system or ''microwave melter'' is described along with some early experimental results that demonstrate a 4 to 1 volume reduction of a surrogate ORNL filtercake sludge

  15. Vitrification facility at the West Valley Demonstration Project

    International Nuclear Information System (INIS)

    DesCamp, V.A.; McMahon, C.L.

    1996-07-01

    This report is a description of the West Valley Demonstration Project's vitrification facilities from the establishment of the West Valley, NY site as a federal and state cooperative project to the completion of all activities necessary to begin solidification of radioactive waste into glass by vitrification. Topics discussed in this report include the Project's background, high-level radioactive waste consolidation, vitrification process and component testing, facilities design and construction, waste/glass recipe development, integrated facility testing, and readiness activities for radioactive waste processing

  16. Industrial treatment of solutions of fission products. Separation of caesium-137; Traitement industriel de solutions de produits de fission. Separation du cesium-137

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, C; Raggenbass, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    Two types of chemical treatment can be considered for the manufacture of solid sources for industrial uses from fission product solutions remaining after plutonium extraction: a) concentration of the solution and preparation of solid sources from the bulk material, without separation, b) separation of one or several fission products from which the sources are made. Examination of the radio-chemical composition of the mixture of fission products that will be available from the Marcoule reactors (G1, G2 and G3) shows that caesium-137 accounts for 30 per cent of the {gamma} energy available immediately after the plutonium separation, 70 per cent two years after and 100 per cent after five years. There is practically no advantage in making sources from bulk fission products, since the separation of caesium-137 is no more complicated and yet it results in a material with more potential uses. The separation of caesium-137 by a method based on the standard phospho-tungstate precipitation method has been considered. Previously, the precipitated caesium phospho-tungstate was dissolved and caesium was recovered from the solution by cation-exchange or by removal of phosphate and tungstate ions by anion-exchange. A study has now been made, of the metathesis of caesium phospho-tungstate to barium phosphate and tungstate by the action of barium hydroxide, the caesium being obtained in solution as the hydroxide. The advantages of this new procedure are: - greater decontamination of caesium-137 without further purification, - possibility of direct transformation to caesium sulphate, - general simplification of the procedure and, consequently, of the equipment. (author) [French] Deux types de traitement chimique peuvent etre envisages pour amener a l'etat de sources solides utilisables industriellement les produits de fission contenus dans les solutions residuaires de l'extraction du plutonium. Ces traitements sont les suivants: a) concentration des solutions et confection de

  17. Industrial treatment of solutions of fission products. Separation of caesium-137; Traitement industriel de solutions de produits de fission. Separation du cesium-137

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, C.; Raggenbass, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    Two types of chemical treatment can be considered for the manufacture of solid sources for industrial uses from fission product solutions remaining after plutonium extraction: a) concentration of the solution and preparation of solid sources from the bulk material, without separation, b) separation of one or several fission products from which the sources are made. Examination of the radio-chemical composition of the mixture of fission products that will be available from the Marcoule reactors (G1, G2 and G3) shows that caesium-137 accounts for 30 per cent of the {gamma} energy available immediately after the plutonium separation, 70 per cent two years after and 100 per cent after five years. There is practically no advantage in making sources from bulk fission products, since the separation of caesium-137 is no more complicated and yet it results in a material with more potential uses. The separation of caesium-137 by a method based on the standard phospho-tungstate precipitation method has been considered. Previously, the precipitated caesium phospho-tungstate was dissolved and caesium was recovered from the solution by cation-exchange or by removal of phosphate and tungstate ions by anion-exchange. A study has now been made, of the metathesis of caesium phospho-tungstate to barium phosphate and tungstate by the action of barium hydroxide, the caesium being obtained in solution as the hydroxide. The advantages of this new procedure are: - greater decontamination of caesium-137 without further purification, - possibility of direct transformation to caesium sulphate, - general simplification of the procedure and, consequently, of the equipment. (author) [French] Deux types de traitement chimique peuvent etre envisages pour amener a l'etat de sources solides utilisables industriellement les produits de fission contenus dans les solutions residuaires de l'extraction du plutonium. Ces traitements sont les suivants: a) concentration des solutions et

  18. Démocratisation de l'information sur les marchés des produits ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    IICA - mercado modelo : consumo de frutas y hortalizas; síntesis general de conclusiones de estudios cuantitativos orientados a consumidores, minoristas generalistas, puestos fijos, y feriantes. Téléchargez le PDF. Études. IICA - mercado modelo : resumen de los relevamientos e investigaciones realizados desde febrero ...

  19. Étude de l'emplacement des produits agricoles sur les principaux ...

    African Journals Online (AJOL)

    English Title: Marketing of food grain products on the main markets of Lome: analysis of the retail sites and appreciation by buyers. English Abstract. The choice of site is a significant factor of success of the marketing strategy lay out by retailers to distribute agricultural products on the various public opened markets. Indeed ...

  20. Caractérisation des co-produits du raffinage valorisation énergétique*

    Directory of Open Access Journals (Sweden)

    Lambert Marc

    2006-01-01

    Full Text Available A cost effective alternative to the existing treatment steps of the refining by-ptoducts, is the “on site” energetical valorization through 2 comparable technologies: thermal oxidation and anaerobic digestion combined with boiler. In a thermal multifluid oxidizer Cinclus®, the mixture is injected with atomisation and combustion air at high velocity into the oxidation chamber. The jet creates a local under-pressure and thus an internal recirculation in the oxidation chamber. This results in a controlled and homogeneous temperature and residence profile that ensure an optimal combustion with low emissions. To prevent persistent boiler fouling, the gases are cooled to below 750 °C in the gas conditioning chamber by mixing the hot gases with recycled gases taken from behind the de-dusting device. Divert investment for fossil fuel boiler and soap stock splitting to install Cinclus soap stock boiler will allow: no acid waste water, no interphase, no sulfuric acid consumption, no fossil fuel consumption. The Dranco process is a well-known and reliable anaerobic digestion technology. Its simple digester design, no moving parts within the digester, provides a high reliability and low maintenance costs. The Dranco process parameters are roughly: digester loading: 10 to 20 kg COD/m3 reactor.day. The temperature range of the thermophilic organisms is 50 to 58 °C. The retention time in the digester is about 15 to 30 days. The biogas production is above 300 m3 of biogas per ton of waste. The electricity production: above 500 kWh per ton of waste. The advantages of anaerobic digestion of waste are: The production of renewable energy and reduction of fossil CO2-emissions ; the low odour emissions and in general low emissions towards the environment.

  1. Fractions lipidiques obtenues à partir des co-produits de la filière halieutique

    Directory of Open Access Journals (Sweden)

    Linder Michel

    2006-01-01

    Full Text Available The purpose of this paper was to take stock of the economic situation on the co-products coming from the fish factories. Such co-products contain large amounts of long-chain polyunsaturated fatty acids (LC-PUFA, mainly docosahexaenoic acid (C22 :6 n-3 and eicosapentaenoic acid (C20 :5 n-3. Several extraction processes (thermal treatments, solvent extraction, enzymatic methods are taking place, considering the importance of these components in human health. Some amphiphilic molecules, which contain high amounts of LC-PUFA may find outlets in nutraceutics, cosmetics and in the food industry, provided their safety and quality are guaranteed.

  2. Compréhension du marché des produits agroalimentaires en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    From Seed to Table : Strengthening Urban Farmers' Organizational and Marketing Skills (Middle East and North Africa). RUAF (Resource Centres on Urban Agriculture and Food Security) was established in 1999 in response to an expressed need on the part of organizations and local governments in the South for a.

  3. Un meilleur accès des pauvres aux produits d'assurance : politiques ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Making insurance markets work for the poor : microinsurance policy, regulation and supervision; Philippines case study. 48836. Études. Making insurance markets work for the poor : microinsurance policy, regulation and supervision; evidence from five country case studies. 48835. Études. Making insurance markets work ...

  4. La réorganisation des échanges internationaux de produits agricoles

    Directory of Open Access Journals (Sweden)

    Dusser Philippe

    2005-05-01

    Full Text Available Markets for agricultural commodities are changing patterns: the leadership is moving between commodities as well as between countries. Demands for meals for feed as well as demand for vegetable oil for human consumption have resulted in a strongly growing world market for oilseed which are seriously challenging the leadership to cereals in term of volume (170 million tons vs 200 million tons while already coming first in value ($45 billion vs $25 billion. The growth in demand is mainly localized in emerging countries in Asia (China, India due to rising consumption of white meats: poultry and pork. Countries tend to produce locally the meats and the grains for feed, while accepting to rely strongly on imports for additional needs of proteins for feed and as well as of vegetable oil for human consumption. This is sustaining the growth of oilseed world exchanges. Parallel to new import markets in emerging countries in Asia, new producers are taking the leadership in exports, outpacing the USA and EU, longtime leaders on ag. markets. South America, and Brazil in particular, thanks to land availability and cheap labor are progressively becoming leaders in soybean, pork, poultry, beef, orange juice, sugar… Russia, Ukraine, are resuming a significant presence on grains markets. For the European Union, the new world context leads to a serious review of future positioning, especially in light of the future WTO obligations – less protection on access, elimination of export subsidies and less internal support. EU Animal productions sector will suffer most from the new context. Grains and oilseed EU production will continue to increase. As prices for grains will be curbed to world market level, some additional land may be diverted to oilseed. Nevertheless the availabilities of cereals will maintain high EU export. Biofuels appear to be a strategic outlet for European agricultural sector, biofuels use grains and sugar beet for ethanol as well as oilseed for biodiesel. Extent of biofuels development will determine the final balance of EU arable crops and especially availability of grains to export.

  5. PNL vitrification technology development project glass formulation strategy for LLW vitrification

    International Nuclear Information System (INIS)

    Kim, D.; Hrma, P.R.; Westsik, J.H. Jr.

    1996-03-01

    This Glass Formulation Strategy describes development approaches to optimize glass compositions for Hanford's low-level waste vitrification between now and the projected low-level waste facility start-up in 2005. The objectives of the glass formulation task are to develop optimized glass compositions with satisfactory long-term durability, acceptable processing characteristics, adequate flexibility to handle waste variations, maximize waste loading to practical limits, and to develop methodology to respond to further waste variations

  6. Le laser comme moyen de dégagement de produits de corrosion sur un objet archéologique : le cas de la dorure sur alliage cuivreux.

    Directory of Open Access Journals (Sweden)

    Valentine Brodard

    2012-06-01

    Full Text Available Le dégagement des produits de corrosion présents sur les objets archéologiques en alliage cuivreux dorés comporte d’importants risques d’altération. Lors d’un dégagement mécanique se pose le problème de la rayure de la surface dorée. Lors d’un traitement chimique, une accélération des processus de corrosion des alliages en présence risque de se produire.Dans ce travail, nous avons testé l’utilisation du laser comme méthode alternative de dégagement des produits de corrosion sur ce type d’objets. Trois lasers Nd:YAG ont été utilisés lors de cette étude : un laser Short free running, un laser long Q-switch et un laser Q-switch. Les tests ont été effectués sur des coupons en cuivre dorés fabriqués d’après deux masques précolombiens. Nos résultats montrent que ces lasers ne permettent pas un dégagement des produits de corrosion sans altérer la surface dorée. Par contre, il existe la possibilité de tester des lasers offrant une vitesse d’impulsion plus rapide comme le laser femtoseconde.The removal of corrosion products from archaeological gilded copper alloys lead to high risks of damage. A mechanical cleaning may induce abrasions of the gilding when a chemical cleaning might increase the corrosion processes.In this thesis, we have tested the use of laser as an alternative for the removal of corrosion products on gilded copper alloy. Three lasers Nd:YAG  were used during our tests : a laser Short free running, a laser Long Q-switch and a laser Q-switch. The tests have been done on gilded copper samples prepared after two pre-Columbian masks. The results prove that lasers don’t permit the removal of corrosion products without damage on the gilded surface. However a laser with a faster pulse like a femtosecond laser may allow the cleaning of gilded copper without any damage

  7. In situ vitrification program treatability investigation progress report

    International Nuclear Information System (INIS)

    Arrenholz, D.A.

    1991-02-01

    This document presents a summary of the efforts conducted under the in situ vitrification treatability study during the period from its initiation in FY-88 until FY-90. In situ vitrification is a thermal treatment process that uses electrical power to convert contaminated soils into a chemically inert and stable glass and crystalline product. Contaminants present in the soil are either incorporated into the product or are pyrolyzed during treatment. The treatability study being conducted at the Idaho National Engineering Laboratory by EG ampersand G Idaho is directed at examining the specific applicability of the in situ vitrification process to buried wastes contaminated with transuranic radionuclides and other contaminants found at the Subsurface Disposal Area of the Radioactive Waste Management Complex. This treatability study consists of a variety of tasks, including engineering tests, field tests, vitrified product evaluation, and analytical models of the in situ vitrification process. 6 refs., 4 figs., 3 tabs

  8. Status of vitrification for DOE low-level mixed waste

    International Nuclear Information System (INIS)

    Schumacher, R.F.; Jantzen, C.M.; Plodinec, M.J.

    1993-04-01

    Vitrification is being considered by the Department of Energy for solidification of many low-level mixed waste streams. Some of the advantages, requirements, and potential problem areas are described. Recommendations for future efforts are presented

  9. Aseptic minimum volume vitrification technique for porcine parthenogenetically activated blastocyst.

    Science.gov (United States)

    Lin, Lin; Yu, Yutao; Zhang, Xiuqing; Yang, Huanming; Bolund, Lars; Callesen, Henrik; Vajta, Gábor

    2011-01-01

    Minimum volume vitrification may provide extremely high cooling and warming rates if the sample and the surrounding medium contacts directly with the respective liquid nitrogen and warming medium. However, this direct contact may result in microbial contamination. In this work, an earlier aseptic technique was applied for minimum volume vitrification. After equilibration, samples were loaded on a plastic film, immersed rapidly into factory derived, filter-sterilized liquid nitrogen, and sealed into sterile, pre-cooled straws. At warming, the straw was cut, the filmstrip was immersed into a 39 degree C warming medium, and the sample was stepwise rehydrated. Cryosurvival rates of porcine blastocysts produced by parthenogenetical activation did not differ from control, vitrified blastocysts with Cryotop. This approach can be used for minimum volume vitrification methods and may be suitable to overcome the biological dangers and legal restrictions that hamper the application of open vitrification techniques.

  10. DOE looks to clean up with vitrification technology

    International Nuclear Information System (INIS)

    Lobsenz, G.

    1994-01-01

    This article describes the vitrification and waste retrieval facility being built by US DOE, designed to handle a mixture of low-level radioactive wastes stored in structurally shaky silos at the Fernald weapons plant

  11. In situ vitrification applications to hazardous wastes

    International Nuclear Information System (INIS)

    Liikala, S.

    1989-01-01

    In Situ Vitrification is a new hazardous waste remediation alternative that should be considered for contaminated soil matrices. According to the authors the advantages of using ISV include: technology demonstrated at field scale; applicable to a wide variety of soils and contaminants; pyrolyzer organics and encapsulates inorganics; product durable over geologic time period; no threat of harm to the public from exposure; and applications available for barrier walls and structural support. The use of ISV on a large scale basis has thus far been limited to the nuclear industry but has tremendous potential for widespread applications to the hazardous waste field. With the ever changing regulations for the disposal of hazardous waste in landfills, and the increasing positive analytical data of ISV, the process will become a powerful source for on-site treatment and hazardous waste management needs in the very near future

  12. Apparatus for studying the diffusion of rare gases in stainless steel; Appareil pour etude de la diffusion des gaz rares dans l'acier inoxydable

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Alfille, L [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    This apparatus enables measurements to be carried out on the diffusion of gaseous fission products and of gases in general across thin metallic walls at high temperatures. This work was initially intended to solve the problems involved in systems for detecting the rupture of a fuel element can (D.R.G.) by the diffusion of fission products through the cans at high temperatures. The extension of the work to other fields is envisaged. (author) [French] Cet appareil permet d'effectuer des mesures sur la diffusion des produits de fission gazeux, et des gaz en general, au travers de parois metalliques minces a haute temperature. Au depart, ce procede devait contribuer a resoudre les problemes poses aux systemes detecteurs de rupture de gaine (D.R.G.), par la diffusion des produits de fission au travers des gaines de cartouches a haute temperature. Son extension a d'autres etudes est envisagee. (auteur)

  13. Vitrification process equipment design for the West Valley Demonstration Project

    International Nuclear Information System (INIS)

    Chapman, C.C.; Drosjack, W.P.

    1988-10-01

    The vitrification process and equipment design is nearing completion for the West Valley Project. This report provides the basis and current status for the design of the major vessels and equipment within the West Valley Vitrification Plant. A review of the function and key design features of the equipment is also provided. The major subsystems described include the feed preparation and delivery systems, the melter, the canister handling systems, and the process off-gas system. 11 refs., 33 figs., 4 tabs

  14. High-level waste processing and conditioning: vitrification

    International Nuclear Information System (INIS)

    Bonniaud, R.

    1981-02-01

    The vitrification process used to treat fission product solutions at the Marcoule Vitrification Plant is described. The type of waste processed is characterized by its very high activity and the long lifetimes of some of the emitters that it contains. The performance obtained with this process is given together with the future developments envisaged. The storage of glasses is described as well as their behavior with time [fr

  15. PREPARATION DES COMPOSITES BENTONITE-DERIVES DE P4VP APPLICATION A LA RETENTION DES COLORANTS TEXTILE

    OpenAIRE

    GADIRI, ANISSA

    2014-01-01

    Les industries du textile rejettent de grandes quantités d‘eaux usées présentant un risque de toxicité. Il existe déjà des traitements tels que l‘adsorption sur charbon actif qui est un processus efficace mais onéreux et qui produit une boue constituant elle même une menace environnementale. Les argiles, les poly (4-vinylpyridine) et ses dérivées pourraient être des matériaux adsorbants alternatifs à la fois économiques et moins polluants. Beaucoup d‘auteurs ont étudié l‘adsorptio...

  16. Modélisation des processus physiques et biologiques dans des fosses septiques et voies de valorisation des boues de vidange:Application à Bujumbura-Burundi

    OpenAIRE

    Nsavyimana, Gaston

    2014-01-01

    Dans les pays en développement (PED) en général et au Burundi en particulier, la problématique de gestion des eaux usées et des déchets solides constitue un enjeu majeur pour les spécialistes et les autorités locales. En effet, suite à un manque des stations d'épuration collectives au Burundi, les fosses septiques sont les plus utilisées pour gérer les eaux usées produites. Cependant, les processus qui s'y déroulent ne sont pas encore maîtrisés et la gestion des boues de vidange lorsque c...

  17. GENOMIQUE ET LIPIDES Génomique et métabolisme des lipides des plantes

    Directory of Open Access Journals (Sweden)

    Delseny Michel

    2002-03-01

    Full Text Available Il existe dans les bases de données publiques une énorme quantité de séquences d’ADN dérivées de plantes, et notamment la séquence complète du génome d’Arabidopsis thaliana, une plante modèle pour les oléagineux, proche parente du colza. Ces données constituent une ressource importante non seulement pour la compréhension de métabolisme lipidique et de sa régulation, mais aussi pour la sélection et le développement de variétés nouvelles d’oléagineux produisant davantage d’huiles ou des huiles de composition nouvelle. Cette abondance de séquences peut être exploitée, en utilisant les recherches d’homologies, pour identifier les gènes, pour obtenir des informations sur leur fonction, comme pour repérer des gènes candidats codant des fonctions nouvelles. L’analyse de ces bases de données a révélé que la majeure partie des gènes codant des enzymes impliquées dans le métabolisme lipidique appartient à des petites familles multigéniques, reflétant la diversification des fonctions des isoformes. Une analyse du catalogue des ADNc séquencés en aveugle reflète les niveaux d’expression des différents gènes et fournit un aperçu des régulations des flux au travers des voies métaboliques conduisant à la biosynthèse des lipides de réserve. La disponibilité de mutants et de lignées transgéniques d’Arabidopsis et le développement de puces à ADN qui permettent l’analyse simultanée de plusieurs milliers de gènes conduiront à une meilleure compréhension des facteurs qui régulent le métabolisme des huiles dans les graines. Une telle connaissance facilitera la manipulation de la composition des huiles et des quantités produites dans les graines.

  18. Effets perturbateurs endocriniens des pesticides organochlores.

    Science.gov (United States)

    Charlier, C; Plomteux, G

    2002-01-01

    entreprises F.Mayo puis par la Geigy Co. a d-abord intéressé l-armée, puis l-agriculture. Dès la fin de la 2(ème) guerre mondiale, des mises en garde furent lancées à propos des effets nocifs du produit (4). Un déclin des populations de grives, d-aigles chauves, d-orfaies et de mammifères consommateurs de poissons fut constaté à partir des années 50 et dénoncé par Rachel Carson dans son célèbre appel du « Silent Spring » de 1962. Bien qu-il soit interdit en Occident depuis les années 70, ce produit a été tellement utilisé et présente une rémanence si longue qu-une contamination ubiquitaire existe aujourd-hui encore. De plus, ce produit continue à être produit aux USA pour être utilisé à des fins de démoustification dans les pays en voie de développement. Il en va de même de l-Hexachlorobenzène (HCB), un autre organochloré dont l-usage est interdit sous nos latitudes, mais reste fréquent dans d-autres pays. Ces deux exemples indiquent que le problème de la contamination continue à nous concerner, même pour des produits dont l-usage est aujourd-hui strictement réglementé ou interdit. Des effets sur la faune semblent encore actuellement devoir être attribués à ces produits. La diminution de la population des phoques dans la mer de Wadden pourrait être due à la forte contamination en composants organochlorés des poissons dont ces phoques se nourrissent (5). Exposé au DDT et à son métabolite dichlorodiphenyldichloroéthylène (DDE), le Seratherodon mossambicus présente une réduction de la sécrétion de cortisol par une action toxique cytospécifique sur l-axe hypothalamo-hypophysaire (6). Des travaux récents ont montré que le DDT et le DDE se lient chez les oiseaux et les mammifères au moyen de liaisons covalentes aux cellules de la zona fasciculata - homologue du tissu interrénal du poisson - induisant des microhémorragies. Cette « défaillance » cortisolique peut s-accompagner d-une perturbation du m

  19. Los Alamos National Laboratory simulated sludge vitrification demonstration

    International Nuclear Information System (INIS)

    Cicero, C.A.; Bickford, D.F.; Bennert, D.M.; Overcamp, T.J.

    1994-01-01

    Technologies are being developed to convert hazardous and mixed wastes to a form suitable for permanent disposal. Vitrification, which has been declared the Best Demonstrated Available Technology (BDAT) for high-level radioactive waste disposal by the EPA, is capable of producing a highly durable wasteform that minimizes disposal volumes through organic destruction, moisture evaporation, and porosity reduction. However, this technology must be demonstrated over a range of waste characteristics, including compositions, chemistries, moistures, and physical characteristics to ensure that it is suitable for hazardous and mixed waste treatment. This project plans to demonstrate vitrification of simulated wastes that are considered representatives of wastes found throughout the DOE complex. For the most part, the primary constituent of the wastes is flocculation aids, such as Fe(OH) 3 , and natural filter aids, such as diatomaceous earth and perlite. The filter aids consist mostly of silica, which serves as an excellent glass former; hence, the reason why vitrification is such a viable option. LANL is currently operating a liquid waste processing plant which produces an inorganic sludge similar to other waste water treatment streams. Since this waste has characteristics that make it suitable for vitrification and the likelihood of success is high, it shall be tested at CU. The objective of this task is to characterize the process behavior and glass product formed upon vitrification of simulated LANL sludge. The off-gases generated from the production runs will also be characterized to help further develop vitrification processes for mixed and low level wastes

  20. Vitrification of neat semen alters sperm parameters and DNA integrity.

    Science.gov (United States)

    Khalili, Mohammad Ali; Adib, Maryam; Halvaei, Iman; Nabi, Ali

    2014-05-06

    Our aim was to evaluate the effect of neat semen vitrification on human sperm vital parameters and DNA integrity in men with normal and abnormal sperm parameters. Semen samples were 17 normozoospermic samples and 17 specimens with abnormal sperm parameters. Semen analysis was performed according to World Health Organization (WHO) criteria. Then, the smear was provided from each sample and fixed for terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) staining. Vitrification of neat semen was done by plunging cryoloops directly into liquid nitrogen and preserved for 7 days. The samples were warmed and re-evaluated for sperm parameters as well as DNA integrity. Besides, the correlation between sperm parameters and DNA fragmentation was assessed pre- and post vitrification. Cryopreserved spermatozoa showed significant decrease in sperm motility, viability and normal morphology after thawing in both normal and abnormal semen. Also, the rate of sperm DNA fragmentation was significantly higher after vitrification compared to fresh samples in normal (24.76 ± 5.03 and 16.41 ± 4.53, P = .002) and abnormal (34.29 ± 10.02 and 23.5 ± 8.31, P < .0001), respectively. There was negative correlation between sperm motility and sperm DNA integrity in both groups after vitrification. Vitrification of neat ejaculates has negative impact on sperm parameters as well as DNA integrity, particularly among abnormal semen subjects. It is, therefore, recommend to process semen samples and vitrify the sperm pellets.

  1. Vitrification and levitation of a liquid droplet on liquid nitrogen.

    Science.gov (United States)

    Song, Young S; Adler, Douglas; Xu, Feng; Kayaalp, Emre; Nureddin, Aida; Anchan, Raymond M; Maas, Richard L; Demirci, Utkan

    2010-03-09

    The vitrification of a liquid occurs when ice crystal formation is prevented in the cryogenic environment through ultrarapid cooling. In general, vitrification entails a large temperature difference between the liquid and its surrounding medium. In our droplet vitrification experiments, we observed that such vitrification events are accompanied by a Leidenfrost phenomenon, which impedes the heat transfer to cool the liquid, when the liquid droplet comes into direct contact with liquid nitrogen. This is distinct from the more generally observed Leidenfrost phenomenon that occurs when a liquid droplet is self-vaporized on a hot plate. In the case of rapid cooling, the phase transition from liquid to vitrified solid (i.e., vitrification) and the levitation of droplets on liquid nitrogen (i.e., Leidenfrost phenomenon) take place simultaneously. Here, we investigate these two simultaneous physical events by using a theoretical model containing three dimensionless parameters (i.e., Stefan, Biot, and Fourier numbers). We explain theoretically and observe experimentally a threshold droplet radius during the vitrification of a cryoprotectant droplet in the presence of the Leidenfrost effect.

  2. Intense pulsed sources of ions and electrons produced by lasers; Sources pulsees intenses d'ions et d'electrons produites par laser

    Energy Technology Data Exchange (ETDEWEB)

    Bourrabier, G [Centre de Recherche de la C.S.F., Corbeville (France); Consoli, T; Slama, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-11-01

    We describe a device for the acceleration of the plasma burst produced by focusing a laser beam into a metal target. We extract the electrons and the ions from the plasma. The maximum current is around 2000 amperes during few microseconds. The study of the effect of the kind of the target on the characteristics of the current shows the great importance of the initial conditions that is the ionisation potential of the target and the energy laser. (authors) [French] On decrit un dispositif destine a accelerer la bouffee de plasma produite par focalisation d'un faisceau laser sur une cible solide. On extrait du plasma les electrons et les ions. Le courant maximum atteint pres de 2000 amperes pendant quelques microsecondes. L'etude de l'effet de la nature de la cible sur les caracteristiques du courant collecte, met en evidence l'importance des conditions initiales (potentiel d'ionisation de la cible, energie du laser). (auteurs)

  3. Exploration des variantes d'artefacts logiciels pour une analyse et une migration vers des lignes de produits

    OpenAIRE

    Martinez , Jabier

    2016-01-01

    Software Product Lines (SPLs) enable the derivation of a family of products based on variability management techniques. Inspired by the manufacturing industry, SPLs use feature configurations to satisfy different customer needs, along with reusable assets to allow systematic reuse. Capitalizing on existing variants by extracting the common and varying elements is referred to as extractive approaches for SPL adoption. Feature identification is needed to analyse the domain variability. Also, to...

  4. Impact de la cristallisation des corps gras sur les propriétés des produits finis

    Directory of Open Access Journals (Sweden)

    Cansell Maud

    2005-09-01

    Full Text Available In various food products, the fat phase which is almost essentially composed of triacylglycerols is found in a crystallized form at temperature of use or of storage. The fat physical characteristics influence the rheological properties and the stability of the products. In food, the fat phase is frequently found in a dispersed form either as oil in water emulsions (ice cream, whipped topping or as water in oil emulsion (butter, margarine. The mechanism of fat crystallisation is different in the bulk phase and in emulsified systems so that the fat behaviour in emulsion can not simply be deduced from that in the bulk phase. In particular, crystallization in emulsion depends on various parameters such as the fat globule size and the presence of surfactants (proteins and low molecular weight emulsifiers. Moreover, fat crystals play a major role in the emulsion stability, i.e., by stabilizing water in oil emulsions and destabilizing oil in water emulsions. Conversely, crystals are implied in the formation of a fat network of partially coalesced droplets that participates to the foam stabilization in aerated food products based on oil in water emulsions.

  5. Etude d'integration fonctionnelle du cycle de developpement des produits et des communautes de pratique virtuelles

    Science.gov (United States)

    Doumit, Nancy

    Product development, subject to time constraints and system complexity, needs synchronous communication between different disciplines and locations in order to enable knowledge sharing. Being well supported, informal information flow increases productivity during product realization. Therefore, manufacturing industries are exploring the use of Enterprise Social Media (ESM) functionalities. This thesis explores the functional integration of formal information technologies such as Product Lifecycle Management (PLM) software with informal technologies as ESM through an industrial case study. Reviewing literature, the candidate has identified a gap between Virtual Communities of Practice (VCoP) and product development, as well as the correlation of PLM solutions and noncontrolled ESM in the aerospace industry. In order to disseminate a descriptive study of the current collaboration status, the author has undertaken online surveys for geodistant employees of the same department, semi-structured interviews and research among existing documentations. Subsequently, a Quality Functional Analysis is performed via two modified House of Quality matrices (PLM and ESM) to assign a convenient support for information transfer independently of its content maturity. Users' needs are categorized, and for each category a choice of platform is made with further recommendation regarding the use of the function or the need of human intervention. VCoP form an integrated part of the solution where employees support the technical content. Thus, essential roles and responsibilities are presented to maintain existing CoP and develop new ones. Finally, the candidate presents the limits of this research, gives recommendations for the manufacturing industry and suggests potential continuation of this study using PLM 2.0 with noncontrolled ESM tools.

  6. Analysis and modelling of the fuels european market; Analyse et modelisation des prix des produits petroliers combustibles en europe

    Energy Technology Data Exchange (ETDEWEB)

    Simon, V

    1999-04-01

    The research focus on the European fuel market prices referring to the Rotterdam and Genoa spot markets as well the German, Italian and French domestic markets. The thesis try to explain the impact of the London IPE future market on spot prices too. The mainstream research has demonstrated that co-integration seems to be the best theoretical approach to investigate the long run equilibrium relations. A particular attention will be devoted to the structural change in the econometric modelling on these equilibriums. A deep analysis of the main European petroleum products markets permit a better model specification concerning each of these markets. Further, we will test if any evidence of relations between spot and domestic prices could be confirmed. Finally, alternative scenarios will be depicted to forecast prices in the petroleum products markets. The objective is to observe the model reaction to changes crude oil prices. (author)

  7. LES VIBRIONS DANS LES PRODUITS DE LA PÊCHE

    African Journals Online (AJOL)

    PC_WINDOWS

    Santé Publique (ENSP) à Rennes et le Centre National de Référence des vibrions et du Choléra (CNRVC) à l'Institut Pasteur ... l'Alimentation, en France, dans le but de normaliser les protocoles d'étude et de recherche de V. cholerae et ..... Vibrio présente dans l'environnement avec les méthodes de détection habituelles.

  8. TENDANCES ACTUELLES EN MARKETING DES SERVICES

    Directory of Open Access Journals (Sweden)

    George NICULESCU

    2010-09-01

    Full Text Available Les activités de services sont difficiles à gérer dans le cadre du marketing-mix traditionnel car, contrairement aux biens tangibles produits la qualité des services est très dépendante de facteurs personnels. De même, la nature intangible des services n’est pas prise en compte dans la plupart des analyses du marketing-mix. Par exemple, la distribution physique ne coïncide pas avec la distribution d’éléments invisibles et la politique de communication de l’approche traditionnelle du marketingmix (4P’s ne reconnaît pas la communication des services établie sur le lieu de rencontre entre le personnel de contact de la firme et les clients. Même si les opinions sont partagées et que le débat n’est pas clos, on peut considérer que des éléments supplémentaires s’imposent pour élaborer un marketing qui permette de satisfaire les attentes des parties contractantes de la façon la plus satisfaisante possible

  9. The Problem of Storing Fission Products Arising from the Processing of Irradiated Uranium-Molybdenum Alloys; Probleme du Stockage des Produits de Fission en Provenance du Traitement des Alliages Uranium-Molybdene Irradies; 041f 0420 041e 0411 041b 0415 041c 0410 0425 0420 0410 041d 0415 041d 0418 042f 041e 0422 0425 041e 0414 041e 0412 041f 041e 0421 041b 0415 041f 0415 0420 0415 0420 0410 0411 041e 0422 041a 0418 041e 0411 041b 0423 0427 0415 041d 041d 041e 0413 041e 0421 041f 041b 0410 0412 0410 0423 0420 0410 041d - 041c 041e 041b 0418 0411 0414 0415 041d ; El Problema del Almacenamiento de los Productos de Fision Procedentes del Tratamiento de las Aleaciones Uranio-Molibdeno Irradiadas

    Energy Technology Data Exchange (ETDEWEB)

    Faugeras, P.; Kikindai, T. [Commissariat a l' Energie Atomique, Paris (France)

    1963-02-15

    Uranium-molybdenum alloys are of value thanks to their in-pile behaviour but serious disadvantages arise in connection with the storing of fission products resulting from the processing of these alloys. Because of the insolubility of molybdenum it is impossible to concentrate a solution of fission products by evaporation, and for this reason we have directed our efforts towards the solubilization of molybdenum through the addition of reagents such as iron or phosphoric ions. In this way one can obtain final solutions of 60 g/l Mo with Fe 100 g/l Mo with PO{sub 4}H{sub 3}. The volumes to be stored are still considerable (especially with Fe) and the possibility of nitrate calcination in a fluidized bed was considered. The reaction takes place at about 400 Degree-Sign C. The behaviour of the ruthenium and the friability of the calcined solid (formation of considerable amounts of fine material) have led us to abandon this process in favour of the preparation of phosphate glasses. (author) [French] Les alliages U-Mo sont interessants par leur tenue en pile, mais ils presentent des inconvenients serieux quant au stockage des produits de fission resultant de leur traitement. L'insolubilite du molybdene interdit toute concentration par evaporation de la solution de produits de fission. C'est pourquoi les auteurs ont oriente leurs etudes vers la solubilisation du molybdene par addition de reactifs tels que le fer ou les ions phosphoriques. Ainsi, on peut obtenir les solutions finales a 60 g/l Mo avec Fe, 100 g/l Mo avec PO{sub 4}H{sub 3} Les volumes a stocker sont encore importants (surtout avec Fe) et la calcination des nitrates dans un lit fluidise a ete etudiee. La reaction a lieu vers 400 Degree-Sign C. Le comportement du ruthenium et la friabilite du solide calcine (formation importante de fines) a conduit a abandonner ce procede au profit de la confection de verres phosphates. (author) [Spanish] Las aleaciones U-Mo son interesantes por la forma en que se comportan en

  10. Recovery of trans-plutonium elements; Recuperation des elements transplutoniens

    Energy Technology Data Exchange (ETDEWEB)

    Espie, J Y; Poncet, B; Simon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1970-07-01

    The object of this work is to study the recovery of americium and curium from the fission-product solution obtained from the processing of irradiated fuel elements made of natural metallic uranium alloyed with aluminium, iron and silicon; these elements have been subjected to an average irradiation of 4000 MW days/ton in a gas-graphite type reactor having a thermal power of 3.7 MW/ton of uranium. The process used consists of 3 extraction cycles and one americium-curium separation: - 1) extraction cycle in 40 per cent TBP: extraction of actinides and lanthanides; elimination of fission products; - 2) extraction cycle in 8 per cent D2EHPA: decontamination from the fission products, decontamination of actinides from lanthanides; - 3) extraction cycle in 40 per cent TBP: separation of the complexing agent and concentration of the actinides; - 4) americium-curium separation by precipitation. (authors) [French] Cette etude a pour objet, la recuperation de l'americium et du curium de la solution de produits de fission provenant du traitement de combustibles irradies a base d'uranium naturel metallique allie a l'aluminium, le fer, et le silicium, et ayant subi une irradiation moyenne de 4000 MWj/t dans une pile du type graphite-gaz, dont la puissance thermique est de 3.7 MW/t d'uranium. Le procede utilise comprend 3 cycles d'extraction et une separation americium-curium: - 1. cycle d'extraction dans le TBP a 40 pour cent: extraction des actinides et des lanthanides, elimination des produits de fission; - 2. cycle d'extraction dans le D2EHPA a 8 pour cent: decontamination en produits de fission, decontamination des actinides en lanthanides; - 3. cycle d'extraction dans le TBP a 40 pour cent: separation du complexant et concentration des actinides; - 4. separation americium-curium par precipitation. (auteurs)

  11. Internet et la recomposition territoriale des relations dans l'agriculture suisse

    OpenAIRE

    Gigon, Nathalie; Crevoisier, Olivier

    2015-01-01

    L'agriculture et l'industrie agro-alimentaire suisses se transformed très rapidement. À un monde industrial fonctionnant à l'échelle nationale et basé sur des normes techniques succède un monde domestique basé sur l'identité régionale et les relations interpersonnelles. L'utilisation d'Internet devrait participer à la recomposition des relations entre producteurs et consommateurs et refléter les transformations territoriales qu'elles impliquent. Or les sites Internet de promotion des produits...

  12. Cryopreservation of zebrafish (Danio rerio) oocytes by vitrification.

    Science.gov (United States)

    Guan, M; Rawson, D M; Zhang, T

    2010-01-01

    Cryopreservation of fish oocytes is challenging because these oocytes have low membrane permeability to water and cryoprotectant and are highly chilling sensitive. Vitrification is considered to be a promising approach for their cryopreservation as it involves rapid freezing and thawing of the oocytes and therefore minimising the chilling injury. In the present study, vitrification properties and the toxicity of a range of vitrification solutions containing different concentrations of Me2SO, methanol, propylene glycol and ethylene glycol were investigated. Two different base media and vitrification methods were compared. The effect of different post-thaw dilution solutions together with incubation periods on oocyte viability were also investigated. Stage III zebrafish oocytes were equilibrated in increasing concentrations of cryoprotectants for 30 min in 3 steps. Oocytes were thawed rapidly in a water bath and cryoprotectants were removed in 4 steps. Oocyte viability was assessed using trypan blue staining. The results showed that vitrification solutions V3 and V4 in KCl buffer had low toxicity and vitrified well. The survivals of oocytes after stepwise dilution using solutions containing permeable cryoprotectants were significant higher than those diluted in 0.5M glucose, and the use of CVA65 vitrification system improved oocyte survival when compared with plastic straws after 30 min at 22 degrees C post-thawing. Cryopreservation of zebrafish oocytes by vitrification is reported here for the first time, although oocyte survivals after cryopreservation assessed by trypan blue staining were relatively high shortly after thawing, they became swollen and translucent after incubation in KCl buffer. Further studies are needed to optimise the post-thaw culturing conditions.

  13. Produits locaux entre nature et culture : de la ferme voisine au terroir. Entretien avec Laurence Bérard

    Directory of Open Access Journals (Sweden)

    Virginie Amilien

    2005-05-01

    Full Text Available V.A. : Laurence Bérard, vous représentez la moitié du célèbre duo Bérard et Marchenay, dont articles et ouvrages sur produits de terroir en France sont incontournables, et c’est à ce titre que vous nous accordez un entretien aujourd’hui pour le numéro sur les produits alimentaires locaux du journal Anthropology of Food. Alors je commencerais par la traditionnelle question : si je vous dis produits locaux, à quoi pensez-vous ?  L.B. : Produits locaux… et pas de produits de terroir…I.T. : Non j...

  14. Confinement-induced vitrification in polyethylene terephthalate

    International Nuclear Information System (INIS)

    Balta Calleja, F. J.; Flores, A.; Di Marco, G.; Pieruccini, M.

    2007-01-01

    Dynamic mechanical thermal analysis performed on cold-drawn polyethylene terephthalate (PET), cold crystallized (annealed) in the temperature interval 100-140 deg. C, reveals the presence of marginally glassy domains above the annealing temperature T a . This suggests that the thermodynamic force driving crystallization causes the structural arrest of some noncrystalline domains. The latter thus need a temperature higher than T a to completely defreeze. Differential scanning calorimetry supports this point of view. Analogous investigations on unoriented PET, cold crystallized in the same conditions, do not show the same peculiarities; thus, chain orientation is relevant to vitrification. This phenomenology is first cast in the language of thermodynamics by introducing an excess chemical potential δμ describing the presence of structural constraints in the amorphous domains and the effect of chain orientation. For a first test of this picture, the orientation contribution to δμ is calculated by means of the Gaussian chain model (this implicitly assumes that δμ is related to the density fluctuations). The resulting expression is then used to discuss the structural differences between cold-drawn and unoriented PET samples reported in the literature

  15. In situ vitrification on buried waste

    International Nuclear Information System (INIS)

    Bates, S.O.

    1992-01-01

    In situ vitrification (ISV) is being evaluated as a remedial treatment technology for buried mixed and transuranic (TRU) wastes at the Subsurface Disposal Area (SDA) at Idaho National Engineering Laboratory (INEL) and can be related to buried wastes at other Department of Energy (DOE) sites. There are numerous locations around the DOE Complex where wastes were buried in the ground or stored for future burial. The Buried Waste Program (BWP) is conducting a comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) remedial investigation/feasibility study (RI/FS) for the Department of Energy - Field Office Idaho (DOE-ID). As part of the RI/FS, an ISV scoping study on the treatability of the SDA mixed low-level and mixed TRU waste is being performed for applicability to remediation of the waste at the Radioactive Waste Management Complex (RWMC). The ISV project being conducted at the INEL by EG ampersand G Idaho, Inc. consists of a treatability investigation to collect data to satisfy nine CERCLA criteria with regards to the SDA. This treatability investigation involves a series of experiments and related efforts to study the feasibility of ISV for remediation of mixed and TRU waste disposed of at the SDA

  16. Vitrification of high-level liquid wastes

    International Nuclear Information System (INIS)

    Varani, J.L.; Petraitis, E.J.; Vazquez, Antonio.

    1987-01-01

    High-level radioactive liquid wastes produced in the fuel elements reprocessing require, for their disposal, a preliminary treatment by which, through a series of engineering barriers, the dispersion into the biosphere is delayed by 10 000 years. Four groups of compounds are distinguished among a great variety of final products and methods of elaboration. From these, the borosilicate glasses were chosen. Vitrification experiences were made at a laboratory scale with simulated radioactive wastes, employing different compositions of borosilicate glass. The installations are described. A series of tests were carried out on four basic formulae using always the same methodology, consisting of a dry mixture of the vitreous matrix's products and a dry simulated mixture. Several quality tests of the glasses were made 1: Behaviour in leaching following the DIN 12 111 standard; 2: Mechanical resistance; parameters related with the facility of the different glasses for increasing their surface were studied; 3: Degree of devitrification: it is shown that devitrification turns the glasses containing radioactive wastes easily leachable. From all the glasses tested, the composition SiO 2 , Al 2 O 3 , B 2 O 3 , Na 2 O, CaO shows the best retention characteristics. (M.E.L.) [es

  17. Americium-curium vitrification process development

    International Nuclear Information System (INIS)

    Fellinger, A.P.; Baich, M.A.; Hardy, B.J

    1999-01-01

    The successful demonstration of sequentially drying, calcining and vitrifying an oxalate slurry in the Drain Tube Test Stand (DTTS) vessel provided the process basis for testing on a larger scale in a cylindrical induction heated melter. A single processing issue, that of batch volume expansion, was encountered during the initial stage of testing. The increase in batch volume centered on a sintered frit cap and high temperature bubble formation. The formation of a sintered frit cap expansion was eliminated with the use of cullet. Volume expansions due to high temperature bubble formation (oxygen liberation from cerium reduction) were mitigated in the DTTS melter vessel through a vessel temperature profile that effectively separated the softening point of the glass cullet and the evolving oxygen from cerium reduction. An increased processing temperature of 1,470 C and a two hour hold time to find any remaining bubbles successfully reduced bubbles in the poured glass to an acceptable level. The success of the preliminary process demonstrations provided a workable process basis that was directly applicable to the newly installed Cylindrical Induction Melter (CIM) system, making the batch flowsheet the preferred option for vitrification of the americium-curium surrogate feed stream

  18. In situ vitrification: Process and products

    International Nuclear Information System (INIS)

    Kindle, C.; Koegler, S.

    1991-06-01

    In situ vitrification (ISV) is an electrically powered thermal treatment process that converts soil into a chemically inert and stable glass and crystalline product. It is similar in concept to bringing a simplified glass manufacturing process to a site and operating it in the ground, using the soil as a glass feed stock. Gaseous emissions are contained, scrubbed, and filtered. When the process is completed, the molten volume cools producing a block of glass and crystalline material that resembles natural obsidian commingled with crystalline phases. The product passes US Environmental Protection Agency (EPA) leach resistance tests, and it can be classified as nonhazardous from a chemical hazard perspective. ISV was developed by the Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE) for application to contaminated soils. It is also being adapted for applications to buried waste, underground tanks, and liquid seepage sites. ISV's then-year development period has included tests on many different site conditions. As of January 1991 there have been 74 tests using PNL's ISV equipment; these tests have ranged from technology development tests using nonhazardous conditions to hazardous and radioactive tests. 2 refs., 6 figs., 7 tabs

  19. Radioactive waste vitrification offgas analysis proposal

    International Nuclear Information System (INIS)

    Nelson, C.W.; Morrey, E.V.

    1993-11-01

    Further validation of the Hanford Waste Vitrification Plant (HWVP) feed simulants will be performed by analyzing offgases during crucible melting of actual waste glasses and simulants. The existing method of vitrifying radioactive laboratory-scale samples will be modified to allow offgas analysis during preparation of glass for product testing. The analysis equipment will include two gas chromatographs (GC) with thermal conductivity detectors (TCD) and one NO/NO x analyzer. This equipment is part of the radioactive formating offgas system. The system will provide real-time analysis of H 2 , O 2 , N 2 , NO, N 2 O, NO 2 , CO, CO 2 , H 2 O, and SO 2 . As with the prior melting method, the product glass will be compatible with durability testing, i.e., Product Consistency Test (PCT) and Material Characterization Center (MCC-1), and crystallinity analysis. Procedures have been included to ensure glass homogeneity and quenching. The radioactive glass will be adaptable to Fe +2 /ΣFe measurement procedures because the atmosphere above the melt can be controlled. The 325 A-hot cell facility is being established as the permanent location for radioactive offgas analysis during formating, and can be easily adapted to crucible melt tests. The total costs necessary to set up and perform offgas measurements on the first radioactive core sample is estimated at $115K. Costs for repeating the test on each additional core sample are estimated to be $60K. The schedule allows for performing the test on the next available core sample

  20. Highly efficient vitrification method for cryopreservation of human oocytes.

    Science.gov (United States)

    Kuwayama, Masashige; Vajta, Gábor; Kato, Osamu; Leibo, Stanley P

    2005-09-01

    Two experiments were performed to develop a method to cryopreserve MII human oocytes. In the first experiment, three vitrification methods were compared using bovine MII oocytes with regard to their developmental competence after cryopreservation: (i) vitrification within 0.25-ml plastic straws followed by in-straw dilution after warming (ISD method); (ii) vitrification in open-pulled straws (OPS method); and (iii) vitrification in plastic handle (Cryotop method). In the second experiment, the Cryotop method, which had yielded the best results, was used to vitrify human oocytes. Out of 64 vitrified oocytes, 58 (91%) exhibited normal morphology after warming. After intracytoplasmic sperm injection, 52 became fertilized, and 32 (50%) developed to the blastocyst stage in vitro. Analysis by fluorescence in-situ hybridization of five blastocysts showed that all were normal diploid embryos. Twenty-nine embryo transfers with a mean number of 2.2 embryos per transfer on days 2 and 5 resulted in 12 initial pregnancies, seven healthy babies and three ongoing pregnancies. The results suggest that vitrification using the Cryotop is the most efficient method for human oocyte cryopreservation.

  1. Vitrification development plan for US Department of Energy mixed wastes

    International Nuclear Information System (INIS)

    Peters, R.; Lucerna, J.; Plodinec, M.J.

    1993-10-01

    This document is a general plan for conducting vitrification development for application to mixed wastes owned by the US Department of Energy. The emphasis is a description and discussion of the data needs to proceed through various stages of development. These stages are (1) screening at a waste site to determine which streams should be vitrified, (2) waste characterization and analysis, (3) waste form development and treatability studies, (4) process engineering development, (5) flowsheet and technical specifications for treatment processes, and (6) integrated pilot-scale demonstration. Appendices provide sample test plans for various stages of the vitrification development process. This plan is directed at thermal treatments which produce waste glass. However, the study is still applicable to the broader realm of thermal treatment since it deals with issues such as off-gas characterization and waste characterization that are not necessarily specific to vitrification. The purpose is to provide those exploring or considering vitrification with information concerning the kinds of data that are needed, the way the data are obtained, and the way the data are used. This will provide guidance to those who need to prioritize data needs to fit schedules and budgets. Knowledge of data needs also permits managers and planners to estimate resource requirements for vitrification development

  2. Waste Vitrification Projects Throughout the US Initiated by SRS

    International Nuclear Information System (INIS)

    Jantzen, C.M.; Whitehouse, J.C.; Smith, M.E.; Pickett, J.B.; Peeler, D.K.

    1998-05-01

    Technologies are being developed by the U. S. Department of Energy's (DOE) Nuclear Facility sites to convert high-level, low-level, and mixed wastes to a solid stabilized waste form for permanent disposal. Vitrification is one of the most important and environmentally safest technologies being developed. The Environmental Protection Agency (EPA) has declared vitrification the best demonstrated available technology for high-level radioactive waste and produced a Handbook of Vitrification Technologies for Treatment of Hazardous and Radioactive Waste. The Defense Waste Processing Facility being tested at will soon start vitrifying the high-level waste at. The DOE Office of Technology Development has taken the position that mixed waste needs to be stabilized to the highest level reasonably possible to ensure that the resulting waste forms will meet both current and future regulatory specifications. Vitrification produces durable waste forms at volume reductions up to 97%. Large reductions in volume minimize long-term storage costs making vitrification cost effective on a life cycle basis

  3. Extraction, fractionnement et concentration des huiles marines

    Directory of Open Access Journals (Sweden)

    Linder Michel

    2004-03-01

    Full Text Available Les huiles marines représentent des sources potentielles d’acides gras polyinsaturés (AGPI dont les implications au niveau de la nutrition et de la santé sont avérées. Ces molécules sont extraites à partir de poissons, algues ou co-produits de la filière halieutique par des procédés de cuisson-pression, en présence de solvants ou par des techniques enzymatiques beaucoup moins drastiques. Des fractions plus ou moins purifiées en AGPI sont obtenues par cristallisation à froid, en présence de solvants organiques, complexation avec de l’urée, distillation moléculaire ou extraction par fluide supercritique. L’utilisation de lipases stéréospécifiques dans des procédés d’hydrolyse et d’estérification conduit à une diversité de molécules d’acylglycérols riches en AGPI trouvant de nombreuses applications dans le domaine de l’agroalimentaire et de la santé.

  4. Hanford Waste Vitrification Plant Dangerous Waste Permit Application

    International Nuclear Information System (INIS)

    1991-10-01

    The Hanford Facility currently stores mixed waste, resulting from various processing operations, in underground storage tanks. The Hanford Waste Vitrification Plant will be constructed and operated to process the high-activity fraction of mixed waste stored in these underground tanks. The Hanford Waste Vitrification Plant will solidify pretreated tank waste into a glass product that will be packaged for disposal in a national repository. This Vitrification Plant Dangerous Waste Permit Application, Revision 2, consists of both a Part A and a Part B permit application. An explanation of the Part A revisions, including Revision 4 submitted with this application, is provided at the beginning of the Part A section. The Part B consists of 15 chapters addressing the organization and content of the Part B Checklist prepared by the Washington State Department of Ecology (Ecology 1987)

  5. Zeolite Vitrification Demonstration Program nonradioactive-process operations summary

    International Nuclear Information System (INIS)

    Bryan, G.H.; Knox, C.A.; Goles, R.G.; Ethridge, L.J.; Siemens, D.H.

    1982-09-01

    The Submerged Demineralizer System is a process developed to decontaminate high-activity level water at Three Mile Island by sorbing the activity (primarily Cs and Sr) onto beds of zeolite. Pacific Northwest Laboratory's Zeolite Vitrification Demonstration Program has the responsibility of demonstrating the full-scale vitrification of this zeolite material. The first phase of this program has been to develop a glass formulation and demonstrate the vitrification process with the use of nonradioactive materials. During this phase, four full-scale nonradioactive demonstration runs were completed. The same zeolite mixture being used in the SDS system was loaded with nonradioactive isotopes of Cs and Sr, dried, blended with glass-forming chemicals and fed to a canister in an in-can melter furnace. During each run, the gaseous effluents were sampled. After each run, glass samples were removed and analyzed

  6. In situ vitrification laboratory-scale test work plan

    International Nuclear Information System (INIS)

    Nagata, P.K.; Smith, N.L.

    1991-05-01

    The Buried Waste Program was established in October 1987 to accelerate the studies needed to develop a long-term management plan for the buried mixed waste at the Radioactive Waste Management Complex at Idaho Engineering Laboratory. The In Situ Vitrification Project is being conducted in a Comprehensive Environmental Response, Compensation, and Liability Act feasibility study format to identify methods for the long-term management of mixed buried waste. To support the overall feasibility study, the situ vitrification treatability investigations are proceeding along the three parallel paths: laboratory-scale tests, intermediate field tests, and field tests. Laboratory-scale tests are being performed to provide data to mathematical modeling efforts, which, in turn, will support design of the field tests and to the health and safety risk assessment. This laboratory-scale test work plan provides overall testing program direction to meet the current goals and objectives of the in situ vitrification treatability investigation. 12 refs., 1 fig., 7 tabs

  7. Functional description of the West Valley Demonstration Project Vitrification Facility

    International Nuclear Information System (INIS)

    Borisch, R.R.; McMahon, C.L.

    1990-07-01

    The primary objective of the West Valley Demonstration Project (WVDP) is the solidification of approximately 2.1 million liters (560,000 gallons) of high-level radioactive waste (HLW) which resulted from the operation of a nuclear fuel reprocessing plant. Since the original plant was not built to accommodate the processing of waste beyond storage in underground tanks, HLW solidification by vitrification presented numerous engineering challenges. Existing facilities required redesign and conversion to meet their new purpose. Vitrification technology and systems needed to be created and then tested. Equipment modifications, identified from cold test results, were incorporated into the final equipment configuration to be used for radioactive (hot) operations. Cold operations have defined the correct sequence and optimal functioning of the equipment to be used for vitrification and have verified the process by which waste will be solidified into borosilicate glass

  8. Feasibility Study for Vitrification of Sodium-Bearing Waste

    International Nuclear Information System (INIS)

    Quigley, J.J.; Raivo, B.D.; Bates, S.O.; Berry, S.M.; Nishioka, D.N.; Bunnell, P.J.

    2000-01-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated under a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is the complete calcination (i.e., treatment) of all SBW by December 31, 2012. One of the proposed options for treatment of SBW is vitrification. This study will examine the viability of SBW vitrification. This study describes the process and facilities to treat the SBW, from beginning waste input from INTEC Tank Farm to the final waste forms. Schedules and cost estimates for construction and operation of a Vitrification Facility are included. The study includes a facility layout with drawings, process description and flow diagrams, and preliminary equipment requirements and layouts

  9. Engineering-scale vitrification of commercial high-level waste

    International Nuclear Information System (INIS)

    Bonner, W.F.; Bjorklund, W.J.; Hanson, M.S.; Knowlton, D.E.

    1980-04-01

    To date, technology for immobilizing commercial high-level waste (HLW) has been extensively developed, and two major demonstration projects have been completed, the Waste Solidification Engineering Prototypes (WSEP) Program and the Nuclear Waste Vitrification Project (NWVP). The feasibility of radioactive waste solidification was demonstrated in the WSEP program between 1966 and 1970 (McElroy et al. 1972) using simulated power-reactor waste composed of nonradioactive chemicals and HLW from spent, Hanford reactor fuel. Thirty-three engineering-scale canisters of solidified HLW were produced during the operations. In early 79, the NWVP demonstrated the vitrification of HLW from the processing of actual commercial nuclear fuel. This program consisted of two parts, (1) waste preparation and (2) vitrification by spray calcination and in-can melting. This report presents results from the NWVP

  10. Design, operation, and evaluation of the transportable vitrification system

    International Nuclear Information System (INIS)

    Zamecnik, J.R.; Young, S.R.; Hansen, E.K.; Whitehouse, J.C.

    1997-01-01

    The Transportable Vitrification System (TVS) is a transportable melter system designed to demonstrate the treatment of low-level and mixed hazardous and radioactive wastes such as wastewater treatment sludges, contaminated soils and incinerator ash. The TVS is a large-scale, fully integrated vitrification system consisting of melter feed preparation, melter, offgas, service, and control modules. The TVS was tested with surrogate waste at the Clemson University Environmental Systems Engineering Department's (ESED) DOE/Industry Center for Vitrification Research prior to being shipped to the DOE Oak Ridge Reservation (ORR) K-25 site for treatment of mixed waste. This testing, along with additional testing at ORR, proved that the TVS would be able to successfully treat mixed waste. These surrogate tests consistently produced glass that met the EPA Toxicity Characteristic Leaching Procedure (TCLP). Performance of the system resulted in acceptable emissions of regulated metals from the offgas system. The TVS is scheduled to begin mixed waste operations at ORR in June 1997

  11. Feasibility Study for Vitrification of Sodium-Bearing Waste

    Energy Technology Data Exchange (ETDEWEB)

    J. J. Quigley; B. D. Raivo; S. O. Bates; S. M. Berry; D. N. Nishioka; P. J. Bunnell

    2000-09-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated under a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is the complete calcination (i.e., treatment) of all SBW by December 31, 2012. One of the proposed options for treatment of SBW is vitrification. This study will examine the viability of SBW vitrification. This study describes the process and facilities to treat the SBW, from beginning waste input from INTEC Tank Farm to the final waste forms. Schedules and cost estimates for construction and operation of a Vitrification Facility are included. The study includes a facility layout with drawings, process description and flow diagrams, and preliminary equipment requirements and layouts.

  12. Structural and microstructural aspects of asbestos-cement waste vitrification

    Science.gov (United States)

    Iwaszko, Józef; Zawada, Anna; Przerada, Iwona; Lubas, Małgorzata

    2018-04-01

    The main goal of the work was to evaluate the vitrification process of asbestos-cement waste (ACW). A mixture of 50 wt% ACW and 50 wt% glass cullet was melted in an electric furnace at 1400 °C for 90 min and then cast into a steel mold. The vitrified product was subjected to annealing. Optical microscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) were used to evaluate the effects of the vitrification. The chemical constitution of the material before and after the vitrification process was also analyzed. It was found that the vitrified product has an amorphous structure in which the components of asbestos-cement waste are incorporated. MIR spectroscopy showed that the absorption bands of chrysotile completely disappeared after the vitrification process. The results of the spectroscopic studies were confirmed by X-ray studies - no diffraction reflections from the chrysotile crystallographic planes were observed. As a result of the treatment, the fibrous asbestos construction, the main cause of its pathogenic properties, completely disappeared. The vitrified material was characterized by higher resistance to ion leaching in an aquatic environment than ACW and a smaller volume of nearly 72% in relation to the apparent volume of the substrates. The research has confirmed the high effectiveness of vitrification in neutralizing hazardous waste containing asbestos and the FT-IR spectroscopy was found to be useful to identify asbestos varieties and visualizing changes caused by the vitrification process. The work also presents the current situation regarding the utilization of asbestos-containing products.

  13. Successful vitrification and autografting of baboon (Papio anubis) ovarian tissue.

    Science.gov (United States)

    Amorim, Christiani A; Jacobs, Sophie; Devireddy, Ram V; Van Langendonckt, Anne; Vanacker, Julie; Jaeger, Jonathan; Luyckx, Valérie; Donnez, Jacques; Dolmans, Marie-Madeleine

    2013-08-01

    Can a vitrification protocol using an ethylene glycol/dimethyl sulphoxide-based solution and a cryopin successfully cryopreserve baboon ovarian tissue? Our results show that baboon ovarian tissue can be successfully cryopreserved with our vitrification protocol. Non-human primates have already been used as an animal model to test vitrification protocols for human ovarian tissue cryopreservation. Ovarian biopsies from five adult baboons were vitrified, warmed and autografted for 5 months. After grafting, follicle survival, growth and function and also the quality of stromal tissue were assessed histologically and by immunohistochemistry. The influence of the vitrification procedure on the cooling rate was evaluated by a computer model. After vitrification, warming and long-term grafting, follicles were able to grow and maintain their function, as illustrated by Ki67, anti-Müllerian hormone (AMH) and growth differentiation factor-9 (GDF-9) immunostaining. Corpora lutea were also observed, evidencing successful ovulation in all the animals. Stromal tissue quality did not appear to be negatively affected by our cryopreservation procedure, as demonstrated by vascularization and proportions of fibrotic areas, which were similar to those found in fresh ungrafted ovarian tissue. Despite our promising findings, before applying this technique in a clinical setting, we need to validate it by achieving pregnancies. In addition to encouraging results obtained with our vitrification procedure for non-human ovarian tissue, this study also showed, for the first time, expression of AMH and GDF-9 in ovarian follicles. This study was supported by grants from the Fonds National de la Recherche Scientifique de Belgique (grant Télévie No. 7.4507.10, grant 3.4.590.08 awarded to Marie-Madeleine Dolmans), Fonds Spéciaux de Recherche, Fondation St Luc, Foundation Against Cancer, and Department of Mechanical Engineering at Louisiana State University (support to Ram Devireddy), and

  14. High-Level Waste Vitrification Facility Feasibility Study

    International Nuclear Information System (INIS)

    D. A. Lopez

    1999-01-01

    A ''Settlement Agreement'' between the Department of Energy and the State of Idaho mandates that all radioactive high-level waste now stored at the Idaho Nuclear Technology and Engineering Center will be treated so that it is ready to be moved out of Idaho for disposal by a compliance date of 2035. This report investigates vitrification treatment of the high-level waste in a High-Level Waste Vitrification Facility based on the assumption that no more New Waste Calcining Facility campaigns will be conducted after June 2000. Under this option, the sodium-bearing waste remaining in the Idaho Nuclear Technology and Engineering Center Tank Farm, and newly generated liquid waste produced between now and the start of 2013, will be processed using a different option, such as a Cesium Ion Exchange Facility. The cesium-saturated waste from this other option will be sent to the Calcine Solids Storage Facilities to be mixed with existing calcine. The calcine and cesium-saturated waste will be processed in the High-Level Waste Vitrification Facility by the end of calendar year 2035. In addition, the High-Level Waste Vitrification Facility will process all newly-generated liquid waste produced between 2013 and the end of 2035. Vitrification of this waste is an acceptable treatment method for complying with the Settlement Agreement. This method involves vitrifying the waste and pouring it into stainless-steel canisters that will be ready for shipment out of Idaho to a disposal facility by 2035. These canisters will be stored at the Idaho National Engineering and Environmental Laboratory until they are sent to a national geologic repository. The operating period for vitrification treatment will be from the end of 2015 through 2035

  15. High-Level Waste Vitrification Facility Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    D. A. Lopez

    1999-08-01

    A ''Settlement Agreement'' between the Department of Energy and the State of Idaho mandates that all radioactive high-level waste now stored at the Idaho Nuclear Technology and Engineering Center will be treated so that it is ready to be moved out of Idaho for disposal by a compliance date of 2035. This report investigates vitrification treatment of the high-level waste in a High-Level Waste Vitrification Facility based on the assumption that no more New Waste Calcining Facility campaigns will be conducted after June 2000. Under this option, the sodium-bearing waste remaining in the Idaho Nuclear Technology and Engineering Center Tank Farm, and newly generated liquid waste produced between now and the start of 2013, will be processed using a different option, such as a Cesium Ion Exchange Facility. The cesium-saturated waste from this other option will be sent to the Calcine Solids Storage Facilities to be mixed with existing calcine. The calcine and cesium-saturated waste will be processed in the High-Level Waste Vitrification Facility by the end of calendar year 2035. In addition, the High-Level Waste Vitrification Facility will process all newly-generated liquid waste produced between 2013 and the end of 2035. Vitrification of this waste is an acceptable treatment method for complying with the Settlement Agreement. This method involves vitrifying the waste and pouring it into stainless-steel canisters that will be ready for shipment out of Idaho to a disposal facility by 2035. These canisters will be stored at the Idaho National Engineering and Environmental Laboratory until they are sent to a national geologic repository. The operating period for vitrification treatment will be from the end of 2015 through 2035.

  16. Vitrification as an alternative to landfilling of tannery sewage sludge.

    Science.gov (United States)

    Celary, Piotr; Sobik-Szołtysek, Jolanta

    2014-12-01

    Due to high content of heavy metals such as chromium, tannery sewage sludge is a material which is difficult to be biologically treated as it is in the case of organic waste. Consequently, a common practice in managing tannery sewage sludge is landfilling. This poses a potential threat to both soil and water environments and it additionally generates costs of construction of landfills that meet specific environment protection requirements. Vitrification of this kind of sewage sludge with the addition of mineral wastes can represent an alternative to landfilling. The aim of this study was to investigate the possibility of obtaining an environmentally safe product by means of vitrification of tannery sewage sludge from a flotation wastewater treatment process and chemical precipitation in order to address the upcoming issue of dealing with sewage sludge from the tannery industry which will be prohibited to be landfilled in Poland after 2016. The focus was set on determining mixtures of tannery sewage sludge with additives which would result in the lowest possible heavy metal leaching levels and highest hardness rating of the products obtained from their vitrification. The plasma vitrification process was carried out for mixtures with various amounts of additives depending on the type of sewage sludge used. Only the materials of waste character were used as additives. One finding of the study was an optimum content of mineral additives in vitrified mixture of 30% v/v waste molding sands with 20% v/v carbonate flotation waste from the zinc and lead industry for the formulations with flotation sewage sludge, and 45% v/v and 5% v/v, respectively, for precipitation sewage sludge. These combinations allowed for obtaining products with negligible heavy metal leaching levels and hardness similar to commercial glass, which suggests they could be potentially used as construction aggregate substitutes. Incineration of sewage sludge before the vitrification process lead to

  17. In situ vitrification: application analysis for stabilization of transuranic waste

    International Nuclear Information System (INIS)

    Oma, K.H.; Farnsworth, R.K.; Rusin, J.M.

    1982-09-01

    The in situ vitrification process builds upon the electric melter technology previously developed for high-level waste immobilization. In situ vitrification converts buried wastes and contaminated soil to an extremely durable glass and crystalline waste form by melting the materials, in place, using joule heating. Once the waste materials have been solidified, the high integrity waste form should not cause future ground subsidence. Environmental transport of the waste due to water or wind erosion, and plant or animal intrusion, is minimized. Environmental studies are currently being conducted to determine whether additional stabilization is required for certain in-ground transuranic waste sites. An applications analysis has been performed to identify several in situ vitrification process limitations which may exist at transuranic waste sites. Based on the process limit analysis, in situ vitrification is well suited for solidification of most in-ground transuranic wastes. The process is best suited for liquid disposal sites. A site-specific performance analysis, based on safety, health, environmental, and economic assessments, will be required to determine for which sites in situ vitrification is an acceptable disposal technique. Process economics of in situ vitrification compare favorably with other in-situ solidification processes and are an order of magnitude less than the costs for exhumation and disposal in a repository. Leachability of the vitrified product compares closely with that of Pyrex glass and is significantly better than granite, marble, or bottle glass. Total release to the environment from a vitrified waste site is estimated to be less than 10 -5 parts per year. 32 figures, 30 tables

  18. Vitrification operational experiences and lessons learned at the WVDP

    International Nuclear Information System (INIS)

    Hamel, W.F. Jr.; Sheridan, M.J.; Valenti, P.J.

    1997-01-01

    The Vitrification Facility (VF) at the West Valley Demonstration Project (WVDP) commenced full, high-level radioactive waste (HLW) processing activities in July 1996. The HLW consists of a blend of washed plutonium-uranium extraction (PUREX) sludge, neutralized thorium extraction (THOREX) waste, and cesium-loaded zeolite. The waste product is borosilicate glass contained in stainless steel canisters, sealed for eventual disposal in a federal repository. This paper discusses the WVDP vitrification process, focusing on operational experience and lessons learned during the first year of continuous, remote operation

  19. Vitrification of low-level and mixed wastes

    International Nuclear Information System (INIS)

    Johnson, T.R.; Bates, J.K.; Feng, Xiangdong.

    1994-01-01

    The US Department of Energy (DOE) and nuclear utilities have large quantities of low-level and mixed wastes that must be treated to meet repository performance requirements, which are likely to become even more stringent. The DOE is developing cost-effective vitrification methods for producing durable waste forms. However, vitrification processes for high-level wastes are not applicable to commercial low-level wastes containing large quantities of metals and small amounts of fluxes. New vitrified waste formulations are needed that are durable when buried in surface repositories

  20. Vitrification as an alternative to landfilling of tannery sewage sludge

    International Nuclear Information System (INIS)

    Celary, Piotr; Sobik-Szołtysek, Jolanta

    2014-01-01

    Highlights: • The possibility of vitrification of tannery sewage sludge was investigated. • Glass cullet was substituted with different wastes of mineral character. • Component ratio in the processed mixtures was optimized. • Environmental safety of the acquired vitrificates was verified. • An alternative management approach of usually landfilled waste was presented. - Abstract: Due to high content of heavy metals such as chromium, tannery sewage sludge is a material which is difficult to be biologically treated as it is in the case of organic waste. Consequently, a common practice in managing tannery sewage sludge is landfilling. This poses a potential threat to both soil and water environments and it additionally generates costs of construction of landfills that meet specific environment protection requirements. Vitrification of this kind of sewage sludge with the addition of mineral wastes can represent an alternative to landfilling. The aim of this study was to investigate the possibility of obtaining an environmentally safe product by means of vitrification of tannery sewage sludge from a flotation wastewater treatment process and chemical precipitation in order to address the upcoming issue of dealing with sewage sludge from the tannery industry which will be prohibited to be landfilled in Poland after 2016. The focus was set on determining mixtures of tannery sewage sludge with additives which would result in the lowest possible heavy metal leaching levels and highest hardness rating of the products obtained from their vitrification. The plasma vitrification process was carried out for mixtures with various amounts of additives depending on the type of sewage sludge used. Only the materials of waste character were used as additives. One finding of the study was an optimum content of mineral additives in vitrified mixture of 30% v/v waste molding sands with 20% v/v carbonate flotation waste from the zinc and lead industry for the formulations with

  1. Vitrification as an alternative to landfilling of tannery sewage sludge

    Energy Technology Data Exchange (ETDEWEB)

    Celary, Piotr, E-mail: pcelary@is.pcz.czest.pl; Sobik-Szołtysek, Jolanta, E-mail: jszoltysek@is.pcz.czest.pl

    2014-12-15

    Highlights: • The possibility of vitrification of tannery sewage sludge was investigated. • Glass cullet was substituted with different wastes of mineral character. • Component ratio in the processed mixtures was optimized. • Environmental safety of the acquired vitrificates was verified. • An alternative management approach of usually landfilled waste was presented. - Abstract: Due to high content of heavy metals such as chromium, tannery sewage sludge is a material which is difficult to be biologically treated as it is in the case of organic waste. Consequently, a common practice in managing tannery sewage sludge is landfilling. This poses a potential threat to both soil and water environments and it additionally generates costs of construction of landfills that meet specific environment protection requirements. Vitrification of this kind of sewage sludge with the addition of mineral wastes can represent an alternative to landfilling. The aim of this study was to investigate the possibility of obtaining an environmentally safe product by means of vitrification of tannery sewage sludge from a flotation wastewater treatment process and chemical precipitation in order to address the upcoming issue of dealing with sewage sludge from the tannery industry which will be prohibited to be landfilled in Poland after 2016. The focus was set on determining mixtures of tannery sewage sludge with additives which would result in the lowest possible heavy metal leaching levels and highest hardness rating of the products obtained from their vitrification. The plasma vitrification process was carried out for mixtures with various amounts of additives depending on the type of sewage sludge used. Only the materials of waste character were used as additives. One finding of the study was an optimum content of mineral additives in vitrified mixture of 30% v/v waste molding sands with 20% v/v carbonate flotation waste from the zinc and lead industry for the formulations with

  2. Bulk Vitrification Castable Refractory Block Protection Study

    Energy Technology Data Exchange (ETDEWEB)

    Hrma, Pavel R.; Bagaasen, Larry M.; Beck, Andrew E.; Brouns, Thomas M.; Caldwell, Dustin D.; Elliott, Michael L.; Matyas, Josef; Minister, Kevin BC; Schweiger, Michael J.; Strachan, Denis M.; Tinsley, Bronnie P.; Hollenberg, Glenn W.

    2005-05-01

    Bulk vitrification (BV) was selected for a pilot-scale test and demonstration facility for supplemental treatment to accelerate the cleanup of low-activity waste (LAW) at the Hanford U.S. DOE Site. During engineering-scale (ES) tests, a small fraction of radioactive Tc (and Re, its nonradioactive surrogate) were transferred out of the LAW glass feed and molten LAW glass, and deposited on the surface and within the pores of the castable refractory block (CRB). Laboratory experiments were undertaken to understand the mechanisms of the transport Tc/Re into the CRB during vitrification and to evaluate various means of CRB protection against the deposition of leachable Tc/Re. The tests used Re as a chemical surrogate for Tc. The tests with the baseline CRB showed that the molten LAW penetrates into CRB pores before it converts to glass, leaving deposits of sulfates and chlorides when the nitrate components decompose. Na2O from the LAW reacts with the CRB to create a durable glass phase that may contain Tc/Re. Limited data from a single CRB sample taken from an ES experiment indicate that, while a fraction of Tc/Re is present in the CRB in a readily leachable form, most of the Tc/Re deposited in the refractory is retained in the form of a durable glass phase. In addition, the molten salts from the LAW, mainly sulfates, chlorides, and nitrates, begin to evaporate from BV feeds at temperatures below 800 C and condense on solid surfaces at temperatures below 530 C. Three approaches aimed at reducing or preventing the deposition of soluble Tc/Re within the CRB were proposed: metal lining, sealing the CRB surface with a glaze, and lining the CRB with ceramic tiles. Metal liners were deemed unsuitable because evaluations showed that they can cause unacceptable distortions of the electric field in the BV system. Sodium silicate and a low-alkali borosilicate glaze were selected for testing. The glazes slowed down molten salt condensate penetration, but did little to reduce the

  3. Equipment experience in a radioactive LFCM [liquid-fed ceramic melter] vitrification facility

    International Nuclear Information System (INIS)

    Holton, L.K. Jr.; Dierks, R.D.; Sevigny, G.J.; Goles, R.W.; Surma, J.E.; Thomas, N.M.

    1986-11-01

    Since October 1984, the Pacific Northwest Laboratory (PNL) has operated a pilot-scale radioactive liquid-fed ceramic melter (RLFCM) vitrification process in shielded manipulator hot cells. This vitrification facility is being operated for the Department of Energy (DOE) to remotely test vitrification equipment components in a radioactive environment and to develop design and operation data that can be applied to production-scale projects. This paper summarizes equipment and process experience obtained from the operations of equipment systems for waste feeding, waste vitrification, canister filling, canister handling, and vitrification off-gas treatment

  4. La santé dans les Caraïbes Contrer l'obésité par la diversité des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    à Saint-Kitts-et-Nevis en raison de la détérioration qui se produit sur les exploitations agricoles, de l'exposition à la lumière solaire, des températures élevées et de la manipulation inappropriée dans les commerces de détail ? • des techniques simples comme l'utilisation de pellicule de plastique peuvent tripler la durée de.

  5. Hanford Waste Vitrification Plant technical manual

    Energy Technology Data Exchange (ETDEWEB)

    Larson, D.E. [ed.; Watrous, R.A.; Kruger, O.L. [and others

    1996-03-01

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

  6. Hanford Waste Vitrification Plant technical manual

    International Nuclear Information System (INIS)

    Larson, D.E.; Watrous, R.A.; Kruger, O.L.

    1996-03-01

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version

  7. Crystalization and redox effects in waste vitrification

    International Nuclear Information System (INIS)

    Kim, C.W.; Buechele, A.C.; Muller, I.S.

    1996-01-01

    This is the continuation of a systematic study to determine the effects of redox state and the concentration of certain transition metals on selected properties of a simplified lime-aluminosilicate glass system, similar to one proposed for high temperature (1350 degrees C-1450 degrees C) vitrification of soil and wastes from DOE sites. The solubilities of Cr 2 O 3 , ZnO, NiO, and Fe 2 O 3 in the base glass, and of the first three oxides in higher-iron variants of the base glass are determined at 1350 degrees C, 1400 degrees C, and 1450 degrees C. Enthalpies of solution are calculated from the solubility data for these four transition metal oxides. Different redox ratios, Fe 2+ /Fe total , are induced at 1450 degrees C in a glass containing NiO at about 75% of its solubility limit at this temperature and related to changes in microstructure. A ZnO-SiO 2 -Fe 2 O 3 pseudoternary 1450 degrees C isotherm is determined and plotted over a wide range of compositions for glasses melted in air. Phases appearing are zincite-, hematite- and spinel-type phases. A Time-Temperature-Transformation (TTT) curve is plotted for a ZnO (12 wt%) containing glass using data from heat treatment studies, and the crystal layer growth rate of a melilite-type phase appearing in this glass is measured at several temperatures over the time range in which the rate is found to be linear. Some kinetic parameters of crystal growth are calculated

  8. Cost performance assessment of in situ vitrification

    International Nuclear Information System (INIS)

    Showalter, W.E.; Letellier, B.C.; Booth, S.R.; Barnes-Smith, P.

    1992-01-01

    In situ vitrification (ISV) is a thermal treatment technology with promise for the destruction or immobilization of hazardous materials in contaminated soils. It has developed over the past decade to a level of maturity where meaningful cost effectiveness studies may be performed. The ISV process melts 4 to 25 m 2 of undisturbed soil to a maximum depth of 6 m into an obsidian-like glass waste form by applying electric current (3750 kill) between symmetrically spaced electrodes. Temperatures of approximately 2000 degree C drive off and destroy complex organics which are captured in an off-gas treatment system, while radio-nuclides are incorporated into the homogeneous glass monolith. A comparative life-cycle cost evaluation between mobile rotary kiln incineration and ISV was performed to quantitatively identify appropriate performance regimes and components of cost which are sensitive to the implementation of each technology. Predictions of melt times and power consumption were obtained from an ISV performance model over ranges of several parameters including electrode spacing, soil moisture, melt depth, electrical resistivity, and soil density. These data were coupled with manpower requirements, capitalization costs, and a melt placement optimization routine to allow interpolation over a wide variety of site characteristics. For the purpose of this study, a single site scenario representative of a mixed waste evaporation pond was constructed. Preliminary comparisons between ISV and incineration show that while operating costs are comparable, ISV avoids secondary treatment and monitored storage of radioactive waste that would be required following conventional incineration. It is the long term storage of incinerated material that is the most expensive component

  9. Vitrification of low level and mixed (radioactive and hazardous) wastes: Lessons learned from high level waste vitrification

    International Nuclear Information System (INIS)

    Jantzen, C.M.

    1994-01-01

    Borosilicate glasses will be used in the USA and in Europe immobilize radioactive high level liquid wastes (HLLW) for ultimate geologic disposal. Simultaneously, tehnologies are being developed by the US Department of Energy's (DOE) Nuclear Facility sites to immobilize low-level and mixed (radioactive and hazardous) wastes (LLMW) in durable glass formulations for permanent disposal or long-term storage. Vitrification of LLMW achieves large volume reductions (86--97 %) which minimize the associated long-term storage costs. Vitrification of LLMW also ensures that mixed wastes are stabilized to the highest level reasonably possible, e.g. equivalent to HLLW, in order to meet both current and future regulatory waste disposal specifications The tehnologies being developed for vitrification of LLMW rely heavily on the technologies developed for HLLW and the lessons learned about process and product control

  10. Initiative Villes ciblées : gestion des déchets urbains à Cochabamba ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La ville de Cochabamba produit chaque jour 400 tonnes de déchets solides qui sont transportées au dépotoir de K'ara K'ara, situé à 10 km de la ville. Les services de gestion des déchets solides de Cochabamba sont inefficaces; les conditions d'exploitation du dépotoir entraînent une contamination de l'eau souterraine, ...

  11. Les ventes de l'entreprise Karen Coffee entraînent des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    18 déc. 2017 ... Après que le café Robusta a été introduit à Than Daung Gyi au cours de la période coloniale britannique, celui-ci est rapidement devenu la principale culture de rente. Toutefois, les agriculteurs locaux n'avaient pas les moyens de présenter leur produit à des marchés plus importants.

  12. Le mixed price bundling, une stratégie marketing alternative ? Le cas bancaire des « offres jeunes »

    OpenAIRE

    Lambey-Checchin, Christine

    2013-01-01

    International audience; Pratique courante notamment chez les prestataires de service, le mixed price bundling consiste à vendre ensemble des produits ou services complémentaires à un prix spécial. La littérature a montré la supériorité de cette forme de bundling en étudiant ses effets sur les comportements des consommateurs. Le papier l'envisage comme une stratégie marketing et examine ses caractéristiques d'offre et de prix. Les résultats d'une analyse comparative des packages proposés par l...

  13. Vitrification and neomineralisation of bentonitic and kaolinitic clays ...

    African Journals Online (AJOL)

    ... metamorphic and/or igneous rocks. Resultant fired mineral phases depicted mineral compositions of ceramic bodies, and the study suggested that these clays could be gainfully utilized in the making of ceramic wares, subject to selected beneficiation processes. Keywords: kaolin, bentonite, vitrification, neomineralization, ...

  14. Vitrification of caudal fin explants from zebrafish adult specimens.

    Science.gov (United States)

    Cardona-Costa, J; Roig, J; Perez-Camps, M; García-Ximénez, F

    2006-01-01

    No data on vitrification of tissue samples are available in fishes. Three vitrification solutions were compared: V1: 20% ethylene glycol and 20% dimethyl sulphoxide; V2: 25% propylene glycol and 20% dimethyl sulphoxide, and; V3: 20% propylene glycol and 13% methanol, all three prepared in Hanks' buffered salt solution plus 20 percent FBS, following the same one step vitrification procedure developed in mammals. Caudal fin tissue pieces were vitrified into 0.25 ml plastic straws in 30s and stored in liquid nitrogen for 3 days minimum, warmed (10s in nitrogen vapour and 5s in a 25 degree C water bath) and cultured (L-15 plus 20% FBS at 28.5 degree C). At the third day of culture, both attachment and outgrowing rates were recorded. V3 led to the worst results (8% of attachment rate). V1 and V2 allow higher attachment rates (V1: 63% vs V2: 50%. P < 0.05) but not significantly different outgrowing rates (83% to 94%). Vitrification of caudal fin pieces is advantageous in fish biodiversity conservation, particularly in the wild, due to the simplicity of procedure and equipment.

  15. Vitrification of organic products in a cold crucible

    International Nuclear Information System (INIS)

    Song, Myung Jae; Park, Jong Kil; Jouan, A.; Ladirat, C.; Merlin, S.; Pujadas, V.

    1997-01-01

    A worldwide increasing interest is presently observed for the waste vitrification whether they are radioactive or hazardous. Vitrification confines the waste in a stable and inert material and reduces significantly the waste volume which has a major effect on the disposal cost. The waste vitrification has been primarily applied for the treatment of high level radioactive waste from spent fuels reprocessing. In France, the CEA had a significant contribution in that field by developing in the 60's a technology based on metallic crucible heated by induction. The CEA continued to be actively engaged in an R and D effort and, since the 80's, is developing an advanced technology based on a cold crucible heated by induction. This technology particularly well fits with the requirements associated with LAW/Man waste treatment. Laboratory as well as preliminary full scale tests have been conducted with encouraging results to investigate the feasibility of direct ion exchange resins vitrification in a cold crucible. KEPRI investigated, In the past years, the different high temperature technologies which were available on the market and able to treat the low- and medium-level active waste produced by the NPP. The most promising technologies identified as a result of the studies were the cold crucible melter (CCM) for the conditioning of the evaporator concentrate, the ions exchange resins and the solid combustible waste and the plasma torch for the remaining solid waste such as filters

  16. Leaching characteristics of copper flotation waste before and after vitrification.

    Science.gov (United States)

    Coruh, Semra; Ergun, Osman Nuri

    2006-12-01

    Copper flotation waste from copper production using a pyrometallurgical process contains toxic metals such as Cu, Zn, Co and Pb. Because of the presence of trace amounts of these highly toxic metals, copper flotation waste contributes to environmental pollution. In this study, the leaching characteristics of copper flotation waste from the Black Sea Copper Works in Samsun, Turkey have been investigated before and after vitrification. Samples obtained from the factory were subjected to toxicity tests such as the extraction procedure toxicity test (EP Tox), the toxicity characteristic leaching procedure (TCLP) and the "method A" extraction procedure of the American Society of Testing and Materials. The leaching tests showed that the content of some elements in the waste before vitrification exceed the regulatory limits and cannot be disposed of in the present form. Therefore, a stabilization or inertization treatment is necessary prior to disposal. Vitrification was found to stabilize heavy metals in the copper flotation waste successfully and leaching of these metals was largely reduced. Therefore, vitrification can be an acceptable method for disposal of copper flotation waste.

  17. Product evaluation of in situ vitrification engineering, Test 4

    International Nuclear Information System (INIS)

    Loehr, C.A.; Weidner, J.R.; Bates, S.O.

    1991-09-01

    This report is one of several that evaluates the In Situ Vitrification (ISV) Engineering-Scale Test 4 (ES-4). This document describes the chemical and physical composition, microstructure, and leaching characteristics of ES-4 product samples; these data provide insight into the expected performance of a vitrified product in an ISV buried waste application similar to that studied in ES-4

  18. Nuclear Waste Vitrification Efficiency: Cold Cap Reactions

    International Nuclear Information System (INIS)

    Kruger, A.A.; Hrma, P.R.; Pokorny, R.

    2011-01-01

    conditions. The model demonstrates that batch foaming has a decisive influence on the rate of melting. Understanding the dynamics of the foam layer at the bottom of the cold cap and the heat transfer through it appears crucial for a reliable prediction of the rate of melting as a function of the melter-feed makeup and melter operation parameters. Although the study is focused on a batch for waste vitrification, the authors expect that the outcome will also be relevant for commercial glass melting.

  19. Comparaison des conduites discursives de mères et d’enseignants dans la co-construction de récits avec des enfants

    Directory of Open Access Journals (Sweden)

    Vinel Elise

    2014-07-01

    Full Text Available Cette communication s’intéresse aux conduites discursives produites par des mères et des enseignants au cours de deux lectures conjointes d’album avec des enfants. Elle s’inscrit dans une approche dialogique et interactionniste du langage. Dans la suite des travaux de Florin (1991, Grossmann (1996, analysant les styles d’interaction des enseignants et de réception des enfants en cours de lecture, mais aussi de ceux de Vygotski (1984, Bruner (1994 ou encore Salazar Orvig et De Weck (2014, nous cherchons à comprendre de quelles manières les adultes racontent des histoires aux enfants et à quelles expériences spécifiques des récits ceux-ci sont confrontés. Dix enfants âgés de 3 à 5 ans ont été filmés au cours de ces séances de lectures d’albums, sans texte et avec texte, avec un de leur parent à leur domicile et avec des pairs et des enseignants à l’école.

  20. Technological study of organic fluids; Etudes technologiques des fluides caloporteurs organique

    Energy Technology Data Exchange (ETDEWEB)

    Leveque, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Under contract to EURATOM (MM. VAN der VENNE and HANNAERT), the C.E.A. and the Progil Society have collaborated on a technological study of the terphenyls. The results obtained from the radiolysis and pyrolysis of the product OM2 (70 p. 100 m-terphenyl, 25 p. 100 o-terphenyl, 5 p. 100 p-terphenyl) are reported. Using two pile loops at temperatures up to 450 deg. C, a phenomena of accelerated pyrolysis on the radiolized material has been demonstrated. Some by-products of the petroleum industry have also been studied, with a view to finding substitutes for terphenyl. (author) [French] Le C.E.A. et la Societe PROGIL ont entrepris en commun sous contrat EURATOM (MM. VAN der VENNE et HANNAERT) une etude technologique des terphenyles. Les resultats de radiolyse et de pyrolyse obtenus sur le produit OM2 (70 p. 100 m-terphenyle, 25 p. 100 o-terphenyle. 5 p. 100 de p-terphenyle) sont exposes. L'exploitation de deux boucles en pile jusqu'a des temperatures de 450 deg. C a mis en evidence un phenomene de pyrolyse acceleree sur le produit radiolyse. On a etudie egalement quelques sous-produits de l'industrie petroliere dans le but de trouver des substituts au terphenyle. (auteur)

  1. Développements récents dans le domaine de l'hydrotraitement des fractions lourdes Advances in the Hydrotreatment of Heavy Petroleum Feedstocks

    Directory of Open Access Journals (Sweden)

    Jacquin Y.

    2006-11-01

    Full Text Available L'évolution du raffinage vers une utilisation des produits pétroliers pour les usages des transports et comme base pour la pétrochimie renforce l'intérêt pour les procédés de transformation des fractions lourdes du pétrole en fractions légères correspondant au marché actuel. Les problèmes posés par le raffinage des résidus de distillation sont semblables à ceux rencontrés pour le traitement des bruts lourds non conventionnels. Les méthodes qui sont actuellement envisagées peuvent être classées en 2 catégories : les méthodes de raffinage avec rejet de carbone comme la cokéfaction et le désasphaltage et les méthodes sans rejet de carbone comme la viscoréduction, l'hydroviscoréduction et l'hydrotraitement catalytique. Chacune de ces techniques est examinée en précisant les rendements en produits liquides qu'elle permet d'atteindre et les hydrotraitements complémentaires nécessaires pour obtenir des produits répondant aux spécifications du marché des produits pétroliers. Les progrès réalisés dans la conception des catalyseurs utilisés pour le traitement des produits lourds permet aujourd'hui d'envisager l'hydrotraitement direct des résidus sous vide de la majorité des bruts raffinés. The increasing use of refined petroleum products for transportation purposes and as petrochemical bases reinforces interest in processes for converting heavy fractions into light fractions suitable for today's market. The refining of distillation residues involves difficulties similar to unconventional heavy-crude processing. As of now methods may be classified in two categories: (i refining methods with carbon rejection such as coking and deasphalting processes, and (ii methods without carbon rejection such as visbreaking, hydrovisbreaking and catalytic hydrotreating. Each of these techniques is examined, taking into account the liquid-product yields it may reach, and the additional hydrotreatments necessary to meet market

  2. Radioactive contamination of aquatic media and organisms; La contamination radioactive des milieux et des organismes aquatiques

    Energy Technology Data Exchange (ETDEWEB)

    Fontaine, Y [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    After a brief account of the radioactive wastes produced by peaceful or military uses of Atomic Industry, the author first describes a series of observations carried out 'in the field' on the extent of contamination in aquatic organisms with respect to that of the medium. The experimental studies are then analysed, with reference both to the radioisotope metabolism and to the factors and types of contamination of aquatic organisms by wastes from atomic industry. A precise experimental project is presented at the end of the paper, including almost 300 references. (author) [French] Apres une courte etude des dechets radioactifs produits par les utilisations pacifiques ou militaires de l'Industrie Atomique, l'auteur fait etat d'abord des observations effectuees 'sur le terrain' concernant l'extension de la contamination des organismes aquatiques en rapport avec celle du milieu. L'auteur analyse ensuite les etudes experimentales se rapportant aussi bien au metabolisme des radioisotopes qu'aux facteurs et aux modalites de la contamination des organismes aquatiques par les dechets de l'industrie atomique. Un projet de travail experimental precis est presente a la fin de cette revue qui comporte pres de 300 references bibliographiques. (auteur)

  3. Radioactive contamination of aquatic media and organisms; La contamination radioactive des milieux et des organismes aquatiques

    Energy Technology Data Exchange (ETDEWEB)

    Fontaine, Y. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    After a brief account of the radioactive wastes produced by peaceful or military uses of Atomic Industry, the author first describes a series of observations carried out 'in the field' on the extent of contamination in aquatic organisms with respect to that of the medium. The experimental studies are then analysed, with reference both to the radioisotope metabolism and to the factors and types of contamination of aquatic organisms by wastes from atomic industry. A precise experimental project is presented at the end of the paper, including almost 300 references. (author) [French] Apres une courte etude des dechets radioactifs produits par les utilisations pacifiques ou militaires de l'Industrie Atomique, l'auteur fait etat d'abord des observations effectuees 'sur le terrain' concernant l'extension de la contamination des organismes aquatiques en rapport avec celle du milieu. L'auteur analyse ensuite les etudes experimentales se rapportant aussi bien au metabolisme des radioisotopes qu'aux facteurs et aux modalites de la contamination des organismes aquatiques par les dechets de l'industrie atomique. Un projet de travail experimental precis est presente a la fin de cette revue qui comporte pres de 300 references bibliographiques. (auteur)

  4. A COMPREHENSIVE TECHNICAL REVIEW OF THE DEMONSTRATION BULK VITRIFICATION SYSTEM

    International Nuclear Information System (INIS)

    SCHAUS, P.S.

    2006-01-01

    In May 2006, CH2M Hill Hanford Group, Inc. chartered an Expert Review Panel (ERP) to review the current status of the Demonstration Bulk Vitrification System (DBVS). It is the consensus of the ERP that bulk vitrification is a technology that requires further development and evaluation to determine its potential for meeting the Hanford waste stabilization mission. No fatal flaws (issues that would jeopardize the overall DBVS mission that cannot be mitigated) were found, given the current state of the project. However, a number of technical issues were found that could significantly affect the project's ability to meet its overall mission as stated in the project ''Justification of Mission Need'' document, if not satisfactorily resolved. The ERP recognizes that the project has changed from an accelerated schedule demonstration project to a formally chartered project that must be in full compliance with DOE 413.3 requirements. The perspective of the ERP presented herein, is measured against the formally chartered project as stated in the approved Justification of Mission Need document. A justification of Mission Need document was approved in July 2006 which defined the objectives for the DBVS Project. In this document, DOE concluded that bulk vitrification is a viable technology that requires additional development to determine its potential applicability to treatment of a portion of the Hanford low activity waste. The DBVS mission need statement now includes the following primary objectives: (1) process approximately 190,000 gallons of Tank S-109 waste into fifty 100 metric ton boxes of vitrified product; (2) store and dispose of these boxes at Hanford's Integrated Disposal Facility (IDF); (3) evaluate the waste form characteristics; (4) gather pilot plant operability data, and (5) develop the overall life cycle system performance of bulk vitrification and produce a comparison of the bulk vitrification process to building a second LAW Immobilization facility or other

  5. Vecteurs Singuliers des Theories des Champs Conformes Minimales

    Science.gov (United States)

    Benoit, Louis

    des entiers positifs, p et q etant de meme parite, et p+q= 2. Les vecteurs singuliers | Psi_{p,q}> et |Psi_{m-p,m+2-q} > sont respectivement de poids h _{p,q}+pq/2 et h_ {p,q}+(m-p)(m+2-q)/2.. Les vecteurs singuliers ont une norme nulle et on doit les eliminer des representations pour que celles -ci soient unitaires. Cette elimination engendrent des equations (super-)differentielles qui dependent directement de la forme explicite des vecteurs singuliers et auxquelles doivent obeir les fonctions de correlations de la theorie. Ainsi la connaissance de ces vecteurs singuliers est intimement reliee au calcul des fonctions de correlation. Les equations definissant les vecteurs singuliers forment un systeme lineaire surdetermine dont le nombre d'equations est de l'ordre de N(pq), le nombre de partitions de l'entier pq. Puisque les vecteurs singuliers jouent un role capital en theorie conforme, il est naturel de chercher des formes explicites pour les vecteurs (ou pour des familles infinies de ceux -ci). Nous donnons ici la forme explicite pour la famille infinie de vecteurs singuliers ayant un de ses indices egal a 1, pour les algebres de Virasoro et de Neveu-Schwarz. Depuis ces decouvertes, d'autres techniques de construction des vecteurs singuliers ont ete developpees, dont celle de Bauer, Di Francesco, Itzykson et Zuber pour l'algebre de Virasoro qui reproduit directement l'expression explicite des vecteurs singuliers |Psi _{1,q}> et |Psi_{p,1}>. Ils ont utilise l'algebre des produits d'operateurs et la fusion entre representations irreductibles pour engendrer des relations de recurence produisant les vecteurs singuliers. Dans le dernier chapitre de cette these nous adaptons cet algorithme a la construction des vecteurs singuliers de l'algebre de Neveu-Schwarz.

  6. Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

    Science.gov (United States)

    Veres, Teodor

    Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

  7. Phonologie et morphosyntaxe de l’anglais dans un produit SIC : le premier module de MACAO Phonologie et morphosyntaxe de l’anglais dans un produit SIC : le premier module de MACAO

    Directory of Open Access Journals (Sweden)

    Laurence Vincent-Durroux

    2002-12-01

    Full Text Available La préoccupation fréquente, chez les étudiants spécialistes d’autres disciplines que l’anglais, d’améliorer leur compréhension de l’anglais oral a motivé notre démarche de création d’un produit SIC (Systèmes d’Information et de Communication : MACAO (Modules d’Aide à la Compréhension de l’Anglais Oral. Le premier module, "S’entraîner à la reconnaissance", est réalisé et l’outil informatique s’est révélé particulièrement utile pour notre projet. Dans cet article, nous faisons état des difficultés récurrentes en compréhension de l’anglais oral : elles peuvent être dues à des attentes erronées fondées sur la dissymétrie entre la langue écrite et la langue orale, mais aussi à une reconnaissance difficile de certains morphèmes par l’existence de variantes phonologiques en fonction du contexte et par la proximité phonologique de certains morphèmes. Nous présentons également comment le contenu du premier module tente d’apporter des solutions à ces difficultés : en amenant les apprenants à prendre conscience du phénomène de réduction vocalique et d’inaccentuation qui touche certaines syllabes des mots aussi bien que certains éléments monosyllabiques de l’énoncé et en proposant un entraînement à la reconnaissance de ces éléments. Le module est en cours de validation avec une phase d’évaluation.French students who have English as part of their curriculum often express the wish to improve their comprehension of oral English. This led us to envisage the creation of a CALL product: MACAO (Modules to help in the comprehension of oral English. The first module has been created: "Training oneself for recognition". The computer was particularly adequate in this prospect. In this paper we present the most frequent difficulties in the comprehension of oral English: they can be related either to erroneous expectations based on the dissymmetry between the written form and the oral

  8. Choosing solidification or vitrification for low-level radioactive and mixed waste treatment

    International Nuclear Information System (INIS)

    Gimpel, R.F.

    1992-01-01

    Solidification (making concrete) and vitrification (making glass) are frequently the treatment methods recommended for treating inorganic or radioactive wastes. Solidification is generally perceived as the most economical treatment method. Whereas, vitrification is considered (by many) as the most effective of all treatment methods. Unfortunately, vitrification has acquired the stigma that it is too expensive to receive further consideration as an alternative to solidification in high volume treatment applications. Ironically, economic studies, as presented in this paper, show that vitrification may be more competitive in some high volume applications. Ex-situ solidification and vitrification are the competing methods for treating in excess of 450 000m 3 of low-level radioactive and mixed waste at the Fernald Environmental Management Project (FEMP or simply, Fernald) located near Cincinnati, Ohio. This paper summarizes how Fernald is choosing between solidification and vitrification as the primary waste treatment method

  9. Choosing solidification or vitrification for low-level radioactive and mixed waste treatment

    International Nuclear Information System (INIS)

    Gimpel, R.F.

    1992-01-01

    Solidification (making concrete) and vitrification (making glass) are frequently the treatment methods recommended for treating inorganic or radioactive wastes. Solidification is generally perceived as the most economical treatment method. Whereas, vitrification is considered (by many) as the most effective of all treatment methods. Unfortunately, vitrification has acquired the stigma that it is too expensive to receive further consideration as an alternative to solidification in high volume treatment applications. Ironically, economic studies, as presented in this paper, show that vitrification may be more competitive in some high volume applications. Ex-situ solidification and vitrification are the competing methods for treating in excess of 450,000 m 3 of low-level radioactive and mixed waste at the Fernald Environmental Management Project (FEMP or simply, Fernald) located near Cincinnati, Ohio. This paper summarized how Fernald is choosing between solidification and vitrification as the primary waste treatment method

  10. Three-Dimensional Printing of Vitrification Loop Prototypes for Aquatic Species.

    Science.gov (United States)

    Tiersch, Nolan J; Childress, William M; Tiersch, Terrence R

    2018-05-16

    Vitrification is a method of cryopreservation that freezes samples rapidly, while forming an amorphous solid ("glass"), typically in small (μL) volumes. The goal of this project was to create, by three-dimensional (3D) printing, open vitrification devices based on an elliptical loop that could be efficiently used and stored. Vitrification efforts can benefit from the application of 3D printing, and to begin integration of this technology, we addressed four main variables: thermoplastic filament type, loop length, loop height, and method of loading. Our objectives were to: (1) design vitrification loops with varied dimensions; (2) print prototype loops for testing; (3) evaluate loading methods for the devices; and (4) classify vitrification responses to multiple device configurations. The various configurations were designed digitally using 3D CAD (Computer Aided Design) software, and prototype devices were produced with MakerBot ® 3D printers. The thermoplastic filaments used to produce devices were acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA). Vitrification devices were characterized by the film volumes formed with different methods of loading (pipetting or submersion). Frozen films were classified to determine vitrification quality: zero (opaque, or abundant crystalline ice formation); one (translucent, or partial vitrification), or two (transparent, or substantial vitrification, glass). A published vitrification solution was used to conduct experiments. Loading by pipetting formed frozen films more reliably than by submersion, but submersion yielded fewer filling problems and was more rapid. The loop designs that yielded the highest levels of vitrification enabled rapid transfer of heat, and most often were characterized as being longer and consisting of fewer layers (height). 3D printing can assist standardization of vitrification methods and research, yet can also provide the ability to quickly design and fabricate custom devices when

  11. Triglycéridémie postprandiale, insulinémie, leptinémie et distribution des apolipoprotéines CIII entre TGRL et HDL chez l’homme normolipidémique

    Directory of Open Access Journals (Sweden)

    Le Roy Brigitte

    2002-07-01

    Full Text Available Notre article, publié en 1998 dans OCL sur la « Leptine, épuration et utilisation postprandiales des lipides chez l’homme », faisait état pour la première fois d’un lien entre cette hormone produite par le tissu adipeux et le risque de maladies cardiovasculaires lié à un défaut d’épuration des lipides en période postprandiale.

  12. Effets des rayonnements de haute energie sur le cristallin de la souris

    CERN Document Server

    Di Paola, M; Bianchi, M; Bianchi, M no 1; Baarli, J no 1; Di Paola, M no 1

    1973-01-01

    L'opacification du cristallin après irradiation par des neutrons et d'autres rayonnements ionisants a été largement étudiée, vu l'importance de telles recherches en radioprotection et la possibilité offerte par ce système d'analyser les effets produits par de petites doses de rayonnement. Les neutrons de haute énergie sont d'un intéret particulier pour la radioprotection près des accélérateurs et dans l'espace, mais jusqu'à présent les études ont été limitées aux neutrons d'énergie inférieur à 14 MeV. L'opacification du cristallin chez la souris, après irradiation par des neutrons de 400 MeV produits par le Synchro-Cyclotron du CERN, a été étudiée. Le valeurs d'E.B.R. ont été déterminées par comparaison avec des rayons X de 250 kV. Une breve discussion des résultats obtenus est inclue dans la présentation.

  13. Americium/Curium Vitrification Pilot Tests - Part II

    International Nuclear Information System (INIS)

    Marra, J.E.; Baich, M.A.; Fellinger, A.P.; Hardy, B.J.; Herman, D.T.; Jones, T.M.; Miller, C.B.; Miller, D.H.; Snyder, T. K.; Stone, M.E.

    1998-05-01

    Isotopes of americium (Am) and curium (Cm) were produced in the past at the Savannah River Site (SRS) for research, medical, and radiological applications. These highly radioactive and valuable isotopes have been stored in an SRS reprocessing facility for a number of years. Vitrification of this solution will allow the material to be more safely stored until it is transported to the DOE Oak Ridge Reservation for use in research and medical applications. A previous paper described operation results from the Am-Cm Melter 2A pilot system, a full-scale non-radioactive pilot facility. This paper presents the results from continued testing in the Pilot Facility and also describes efforts taken to look at alternative vitrification process operations and flowsheets designed to address the problems observed during melter 2A pilot testing

  14. New developments for medium and low level waste vitrification

    International Nuclear Information System (INIS)

    Boen, A.J.-R.; Pujadas, S.M.-V.

    1997-01-01

    Converting ultimate waste material into a stable, inert product is beneficial, notably in the case of potentially very toxic wastes. Vitrification, in which a glass or glass-ceramic material is fabricated from a particular waste form, is now a proven solution. This high-temperature process uses additives-notably silica-if necessary to form a glass network. Vitrification confines the waste by forming a stable, inert, nontoxic material suitable for safe disposal; it usually also results in a significant volume reduction having a major effect on the disposal cost. France is actively engaged in an ongoing research effort in this area, not only to enhance the production capacity and the containment quality, but also to extend the process to low and medium level wastes such as those produced in nuclear power stations

  15. Evaluation of vitrification factors from DWPF's macro-batch 1

    International Nuclear Information System (INIS)

    Edwards, T.B.

    2000-01-01

    The Defense Waste Processing Facility (DWPF) is evaluating new sampling and analytical methods that may be used to support future Slurry Mix Evaporator (SME) batch acceptability decisions. This report uses data acquired during DWPF's processing of macro-batch 1 to determine a set of vitrification factors covering several SME and Melter Feed Tank (MFT) batches. Such values are needed for converting the cation measurements derived from the new methods to a ''glass'' basis. The available data from macro-batch 1 were used to examine the stability of these vitrification factors, to estimate their uncertainty over the course of a macro-batch, and to provide a recommendation on the use of a single factor for an entire macro-batch. The report is in response to Technical Task Request HLW/DWPF/TTR-980015

  16. Treatment of hazardous metals by in situ vitrification

    International Nuclear Information System (INIS)

    Koegler, S.S.; Buelt, J.L.

    1989-02-01

    Soils contaminated with hazardous metals are a significant problem to many Defense Program sites. Contaminated soils have ranked high in assessments of research and development needs conducted by the Hazardous Waste Remedial Action Program (HAZWRAP) in FY 1988 and FY 1989. In situ vitrification (ISV) is an innovative technology suitable for stabilizing soils contaminated with radionuclides and hazardous materials. Since ISV treats the material in place, it avoids costly and hazardous preprocessing exhumation of waste. In situ vitrification was originally developed for immobilizing radioactive (primarily transuranic) soil constituents. Tests indicate that it is highly useful also for treating other soil contaminants, including hazardous metals. The ISV process produces an environmentally acceptable, highly durable glasslike product. In addition, ISV includes an efficient off-gas treatment system that eliminates noxious gaseous emissions and generates minimal hazardous byproducts. This document reviews the Technical Basis of this technology. 5 refs., 7 figs., 2 tabs

  17. The role of troublesome components in plutonium vitrification

    Energy Technology Data Exchange (ETDEWEB)

    Li, Hong; Vienna, J.D.; Peeler, D.K.; Hrma, P.; Schweiger, M.J. [Pacific Northwest National Lab., Richland, WA (United States)

    1996-05-01

    One option for immobilizing surplus plutonium is vitrification in a borosilicate glass. Two advantages of the glass form are (1) high tolerance to feed variability and, (2) high solubility of some impurity components. The types of plutonium-containing materials in the United States inventory include: pits, metals, oxides, residues, scrap, compounds, and fuel. Many of them also contain high concentrations of carbon, chloride, fluoride, phosphate, sulfate, and chromium oxide. To vitrify plutonium-containing scrap and residues, it is critical to understand the impact of each component on glass processing and chemical durability of the final product. This paper addresses glass processing issues associated with these troublesome components. It covers solubility limits of chlorine, fluorine, phosphate, sulfate, and chromium oxide in several borosilicate based glasses, and the effect of each component on vitrification (volatility, phase segregation, crystallization, and melt viscosity). Techniques (formulation, pretreatment, removal, and/or dilution) to mitigate the effect of these troublesome components are suggested.

  18. Safeguardability of the vitrification option for disposal of plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Pillay, K.K.S. [Los Alamos National Lab., NM (United States)

    1996-05-01

    Safeguardability of the vitrification option for plutonium disposition is rather complex and there is no experience base in either domestic or international safeguards for this approach. In the present treaty regime between the US and the states of the former Soviet Union, bilaterial verifications are considered more likely with potential for a third-party verification of safeguards. There are serious technological limitations to applying conventional bulk handling facility safeguards techniques to achieve independent verification of plutonium in borosilicate glass. If vitrification is the final disposition option chosen, maintaining continuity of knowledge of plutonium in glass matrices, especially those containing boron and those spike with high-level wastes or {sup 137}Cs, is beyond the capability of present-day safeguards technologies and nondestructive assay techniques. The alternative to quantitative measurement of fissile content is to maintain continuity of knowledge through a combination of containment and surveillance, which is not the international norm for bulk handling facilities.

  19. Evaluation of cold testing for Tokai Vitrification Facility

    International Nuclear Information System (INIS)

    Yoshioka, Masahiro; Inada, Eiichi

    1994-01-01

    The cold testing of the Tokai Vitrification Facility (TVF) was completed at the end of March, 1994 through the tests of nearly two years since May in 1992. The cold testing was carried out in order to evaluate the process equipment, product quality control, remote maintenance capability. The test results shown that TVF has enough performance with safety to treat the liquid waste in each process, and to control the product quality. For the remote maintenance of process equipment in the vitrification cell, the remote maintenance capability was confirmed for all remote equipment in the cell. The improvements were taken for some equipment with problem from the point of the operability and maintenance. It was confirmed by these test results that the TVF can go forward to the hot test operation using actual waste. (author)

  20. Glass formulation for phase 1 high-level waste vitrification

    International Nuclear Information System (INIS)

    Vienna, J.D.; Hrma, P.R.

    1996-04-01

    The purpose of this study is to provide potential glass formulations for prospective Phase 1 High-Level Waste (HLW) vitrification at Hanford. The results reported here will be used to aid in developing a Phase 1 HLW vitrification request for proposal (RFP) and facilitate the evaluation of ensuing proposals. The following factors were considered in the glass formulation effort: impact on total glass volume of requiring the vendor to process each of the tank compositions independently versus as a blend; effects of imposing typical values of B 2 O 3 content and waste loading in HLW borosilicate glasses as restrictions on the vendors (according to WAPS 1995, the typical values are 5--10 wt% B 2 O 3 and 20--40 wt% waste oxide loading); impacts of restricting the processing temperature to 1,150 C on eventual glass volume; and effects of caustic washing on any of the selected tank wastes relative to glass volume

  1. Method of vitrificating fine-containing liquid waste

    International Nuclear Information System (INIS)

    Hagiwara, Minoru; Matsunaka, Kazuhisa.

    1989-01-01

    This invention concerns a vitrificating method of liquid wastes containing fines (metal powder discharged upon cutting fuel cans) used in a process for treating high level radioactive liquid wastes or a process for treating liquid wastes from nuclear power plants. Liquid wastes containing fines, slurries, etc. are filtered by a filter vessel comprising glass fibers. The fines are supplied as they are to a glass melting furnace placed in the vessel. Filterates formed upon filteration are mixed with other high level radioactive wastes and supplied together with starting glass material to the glass melting furnace. Since the fine-containing liquid wastes are processed separately from high radioactive liquid wastes, clogging of pipeways, etc. can be avoided, supply to the melting furnace is facilitated and the operation efficiency of the vitrification process can be improved. (I.N.)

  2. Vitrification of transuranic and beta-gamma contaminated solid wastes

    International Nuclear Information System (INIS)

    Dukes, M.D.

    1980-06-01

    Vitrification of solid transuranic contaminated (TRU) wastes alone and with high-level liquid wastes (HLLW) was studied. Homogeneous glasses containing 20 to 30 wt % ash were made by using glass frits previously developed at the Savannah River Plant and Pacific Northwest Laboratories. If the ash is vitrified along with the HLLW, 1.0 wt % as can be added to the waste forms without affecting their quality. This loading of ash is well above the loading required by the relative amounts of HLLW and TRU ash that will be processed at the Savannah River Plant. Vitrification of TRU-contaminated electropolishing sludges and high efficiency particular air filter materials along with HLLW would require an increase in the quantity of glass to be produced. However, if these TRU-contaminated solids were vitrified with the HLLW, the addition of low-level beta-gamma contaminated ash would require no further increase in glass production

  3. Pretreatment of americium/curium solutions for vitrification

    International Nuclear Information System (INIS)

    Rudisill, T.S.

    1996-01-01

    Vitrification will be used to stabilize an americium/curium (Am/Cm) solution presently stored in F-Canyon for eventual transport to the heavy isotope programs at Oak Ridge National Laboratory. Prior to vitrification, an in-tank oxalate precipitation and a series of oxalic/nitric acid washes will be used to separate these elements and lanthanide fission products from the bulk of the uranium and metal impurities present in the solution. Pretreatment development experiments were performed to understand the behavior of the lanthanides and the metal impurities during the oxalate precipitation and properties of the precipitate slurry. The results of these experiments will be used to refine the target glass composition allowing optimization of the primary processing parameters and design of the solution transfer equipment

  4. Tolerancing requirements for remote handling at the Hanford vitrification project

    International Nuclear Information System (INIS)

    Keenan, R.M.; Bullis, R.E.; Van Katwijk, C.

    1993-01-01

    The Hanford Waste Vitrification Plant is being designed by Fluor Daniel, Inc. with WasteChem Corporation as Fluor Daniel's major subcontractor specializing in vitrification and remote system technologies. United Engineers and Constructors/Catalytic (UE ampersand C) will construct the plant. Westinghouse Hanford Company (WHC) is the Project Integration manager, manager and as the plant operator provides technical direction to the Architect/Engineer team (A/E) and constructor on behalf of the Department of Energy - Richland Field Office. The A/E has developed, in cooperation with UE ampersand C, WHC and DOE, a new and innovative approach to installations of the many remote nozzles and electrical connectors that must be installed to demanding tolerances. This paper summarizes the key elements of the HWVP approach

  5. Cryopreservation of coconut (Cocos nucifera L.) zygotic embryos by vitrification.

    Science.gov (United States)

    Sajini, K K; Karun, A; Amamath, C H; Engelmann, F

    2011-01-01

    The present study investigates the effect of preculture conditions, vitrification and unloading solutions on survival and regeneration of coconut zygotic embryos after cryopreservation. Among the seven plant vitrification solutions tested, PVS3 was found to be the most effective for regeneration of cryopreserved embryos. The optimal protocol involved preculture of embryos for 3 days on medium with 0.6 M sucrose, PVS3 treatment for 16 h, rapid cooling and rewarming and unloading in 1.2 M sucrose liquid medium for 1.5 h. Under these conditions, 70-80 survival (corresponding to size enlargement and weight gain) was observed with cryopreserved embryos and 20-25 percent of the plants regenerated (showing normal shoot and root growth) from cryopreserved embryos were established in pots.

  6. Commercial Ion Exchange Resin Vitrification in Borosilicate Glass

    International Nuclear Information System (INIS)

    Cicero-Herman, C.A.; Workman, P.; Poole, K.; Erich, D.; Harden, J.

    1998-05-01

    Bench-scale studies were performed to determine the feasibility of vitrification treatment of six resins representative of those used in the commercial nuclear industry. Each resin was successfully immobilized using the same proprietary borosilicate glass formulation. Waste loadings varied from 38 to 70 g of resin/100 g of glass produced depending on the particular resin, with volume reductions of 28 percent to 68 percent. The bench-scale results were used to perform a melter demonstration with one of the resins at the Clemson Environmental Technologies Laboratory (CETL). The resin used was a weakly acidic meth acrylic cation exchange resin. The vitrification process utilized represented a approximately 64 percent volume reduction. Glass characterization, radionuclide retention, offgas analyses, and system compatibility results will be discussed in this paper

  7. Stabilization of contaminated soils by in situ vitrification

    International Nuclear Information System (INIS)

    Timmerman, C.L.

    1984-01-01

    In Situ Vitrification is an emerging technology developed by Pacific Northwest Laboratory for potential in-place immobilization of radioactive wastes. The contaminated soil is stabilized and converted to an inert glass form. This conversion is accomplished by inserting electrodes in the soil and establishing an electric current between the electrodes. The electrical energy causes a joule heating effect that melts the soil during processing. Any contaminants released from the melt are collected and routed to an off-gas treatment system. A stable and durable glass block is produced which chemically and physically encapsulates any residual waste components. In situ vitrification has been developed for the potential application to radioactive wastes, specifically, contaminated soil sites; however, it could possibly be applied to hazardous chemical and buried munitions waste sites. The technology has been developed and demonstrated to date through a series of 21 engineering-scale tests [producing 50 to 1000 kg (100 to 2000 lb) blocks] and seven pilot-scale tests [producing 9000 kg (20,000 lb) blocks], the most recent of which illustrated treatment of actual radioactively contaminated soil. Testing with some organic materials has shown relatively complete thermal destruction and incineration. Further experiments have documented the insensitivity of in situ vitrification to soil characteristics such as fusion temperature, specific heat, thermal conductivity, electrical resistivity, and moisture content. Soil inclusions such as metals, cements, ceramics, and combustibles normally present only minor process limitations. Costs for hazardous waste applications are estimated to be less than $175/m 3 ($5.00/ft 3 ) of material vitrified. For many applications, in situ vitrification can provide a cost-effective alternative to other disposal options. 13 references, 4 figures, 1 table

  8. Feed Variability and Bulk Vitrification Glass Performance Assessment

    International Nuclear Information System (INIS)

    Mahoney, Lenna A.; Vienna, John D.

    2005-01-01

    The supplemental treatment (ST) bulk vitrification process will obtain its feed, consisting of low-activity waste (LAW), from more than one source. One purpose of this letter report is to describe the compositional variability of the feed to ST. The other is to support the M-62-08 decision by providing a preliminary assessment of the effectiveness of bulk vitrification (BV), the process that has been selected to perform supplemental treatment, in handling the ST feed envelope. Roughly nine-tenths of the ST LAW feed will come from the Waste Treatment Plant (WTP) pretreatment. This processed waste is expected to combine (1) a portion of the same LAW feed sent to the WTP melters and (2) a dilute stream that is the product of the condensate from the submerged-bed scrubber (SBS) and the drainage from the electrostatic precipitator (WESP), both of which are part of the LAW off-gas system. The manner in which the off-gas-product stream is concentrated to reduce its volume, and the way in which the excess LAW and off-gas product streams are combined, are part of the interface between WTP and ST and have not been determined. This letter report considers only one possible arrangement, in which half of the total LAW is added to the off-gas product stream, giving an estimated ST feed stream from WTP. (Total LAW equals that portion of LAW sent to the WTP LAW vitrification plant (WTP LAW) plus the LAW not currently treatable in the LAW vitrification plant due to capacity limitations (excess))

  9. Characterization and vitrification of Hanford radioactive high level wastes

    International Nuclear Information System (INIS)

    Tingey, J.M.; Elliott, M.L.; Larson, D.E.; Morrey, E.V.

    1991-01-01

    Radioactive Neutralized Current Acid Waste (NCAW) samples from the Hanford waste tanks have been chemically, radiochemically and physically characterized. The wastes were processed according to the Hanford Waste vitrification Plant (HWVP) flowsheet, and characterized after each process step. The waste glasses were sectioned and leach tested. Chemical, radiochemical and physical properties of the waste will be presented and compared to nonradioactive simulant data and the HWVP reference composition and properties

  10. Vitrification of radioactive waste. Application to other kinds of waste

    International Nuclear Information System (INIS)

    Jouan, A.

    1993-01-01

    The containment by vitrification of radioactive waste is applied to concentrate solutions of fission products coming from the spent fuel reprocessing. By the way of liquid state to solid state, it is possible to reduce the volume of waste, to get a material with safety guarantees necessary to long storage and the glass by its chemical resistance, its thermal stability and its well resistance to irradiation answers particularly well to these necessities

  11. Vitrification of high-level alumina nuclear waste

    International Nuclear Information System (INIS)

    Brotzman, J.R.

    1979-01-01

    Borophosphate glass compositions have been developed for the vitrification of a high-alumina calcined defense waste. The effect of substituting SiO 2 , P 2 O 5 and CuO for B 2 O 3 on the viscosity and leach resistance was measured. The effect of the alkali to borate ratio and the Li 2 O:Na 2 O ratio on the melt viscosity and leach resistance was also measured

  12. Scaling considerations for modeling the in situ vitrification process

    International Nuclear Information System (INIS)

    Langerman, M.A.; MacKinnon, R.J.

    1990-09-01

    Scaling relationships for modeling the in situ vitrification waste remediation process are documented based upon similarity considerations derived from fundamental principles. Requirements for maintaining temperature and electric potential field similarity between the model and the prototype are determined as well as requirements for maintaining similarity in off-gas generation rates. A scaling rationale for designing reduced-scale experiments is presented and the results are assessed numerically. 9 refs., 6 figs

  13. Dismantling and decontamination of the PIVER prototype vitrification facility

    International Nuclear Information System (INIS)

    Jouan, A.

    1989-01-01

    The PIVER facility was dismantled for replacement by a new continuous pilot plant. The more important operation concerns the vitrification cell, containing equipments of the process, for complete disposal and maximum decontamination, requiring dismantling, cutting, conditioning and removal of equipment inside the cell. Manipulators, handling and cutting tools were used. Activity of removed material and irradiation of personal are followed during the work for matching intervention means to operation conditions [fr

  14. Ventilation of radioactive enclosures; Ventilation des enceintes radioactives

    Energy Technology Data Exchange (ETDEWEB)

    Caminade, F; Laurent, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    Mechanical, physical and chemical manipulations on radioactive products must be carried out in properly ventilated enclosed places. The air extracted can only be discharged into the atmosphere after a correct filtration. The power of the ventilation systems is a function of the dimensions and purpose of the enclosure? The choice of types of filter is determined by the physical state and chemical nature of the radioactive materials to be manipulated. This study deals with the individual equipment of small installations: glove boxes, manipulation boxes with outside control and, if necessary, production chambers (maximum useful volume: 5 m{sup 3}). The performances of three types of 'ventilators', and the modifications provided by the addition of filters, are measured and compared. (author) [French] Les manipulations oceaniques, physiques et chimiques sur des produits radioactifs doivent s'effectuer dans des enceintes convenablement ventilees. L'air extrait ne peut etre rejete dans l'atmosphere qu'apres une filtration correcte. La puissance des installations de ventilation est fonction des dimensions de l'enceinte et de son utilisation. Le choix des types de filtres est determine par l'etat physique et la nature ehimique des corps radioactifs manipules. Notre etude porte sur l'equipement individuel d'installations de petites dimensions: boites a gants, boites a pinces et, a la rigueur, enceintes de production (volume maximum utilisable 5 m{sup 3}). Nous mesurons et comparons les performances de trois types de 'ventilateurs' et les modifications apportees par l'adjonction de filtres. (auteur)

  15. In situ vitrification program treatability investigation progress report

    International Nuclear Information System (INIS)

    Arrenholz, D.A.

    1990-12-01

    This document presents a summary of the efforts conducted under the in situ vitrification treatability study during the period from its initiation in FY-88 until FY-90. In situ vitrification is a thermal treatment process that uses electrical power to convert contaminated soils into a chemically inert and stable glass and crystalline product. Contaminants present in the soil are either incorporated into the product or are pyrolyzed during treatment. The treatability study being conducted at the Idaho National Engineering Laboratory by EG ampersand G Idaho is directed at examining the specific applicability of the in situ vitrification process to buried wastes contaminated with transuranic radionuclides and other contaminants found at the Subsurface Disposal Area of the Radioactive Waste Management Complex. This treatability study consists of a variety of tasks, including engineering tests, field tests, vitrified product evaluation, and analytical models of the ISV process. The data collected in the course of these efforts will address the nine criteria set forth in the Comprehensive Environmental Response, Compensation, and Liability Act, which will be used to identify and select specific technologies to be used in the remediation of the buried wastes at the Subsurface Disposal Area. 6 refs., 4 figs., 3 tabs

  16. Independent engineering review of the Hanford Waste Vitrification System

    International Nuclear Information System (INIS)

    1991-10-01

    The Hanford Waste Vitrification Plant (HWVP) was initiated in June 1987. The HWVP is an essential element of the plan to end present interim storage practices for defense wastes and to provide for permanent disposal. The project start was justified, in part, on efficient technology and design information transfer from the prototype Defense Waste Processing Facility (DWPF). Development of other serial Hanford Waste Vitrification System (HWVS) elements, such as the waste retrieval system for the double-shell tanks (DSTs), and the pretreatment system to reduce the waste volume converted into glass, also was required to accomplish permanent waste disposal. In July 1991, at the time of this review, the HWVP was in the Title 2 design phase. The objective of this technical assessment is to determine whether the status of the technology development and engineering practice is sufficient to provide reasonable assurance that the HWVP and the balance of the HWVS system will operate in an efficient and cost-effective manner. The criteria used to facilitate a judgment of potential successful operation are: vitrification of high-level radioactive waste from specified DSTs on a reasonably continuous basis; and glass produced with physical and chemical properties formally acknowledge as being acceptable for disposal in a repository for high-level radioactive waste. The criteria were proposed specifically for the Independent Engineering Review to focus that assessment effort. They are not represented as the criteria by which the Department will judge the prudence of the Project. 78 refs., 10 figs., 12 tabs

  17. Development of vitrification line technology and the manufacture of equipment

    International Nuclear Information System (INIS)

    Alexa, J.

    1989-01-01

    The development is described of technology and the production of equipment for the vitrification of liquid radioactive wastes. For vitrification, frit Frita F270 is used containing up to 20% titanium and featuring a corrosion effect lower by one order than that of lead glass. The liquid waste is discharged in a measuring tank where it is mixed with formic acid. It is then pumped into an evaporator. Breed vapor is carried via a condenser to a condensate tank. The evaporator concentrate is transported to a homogenizer where it is gradually mixed with Frita. The viscous mush thus produced is carried into a furnace where the remaining water is evaporated. The furnace decontamination factor is 10 2 to 10 3 . At a temperature of up to 1,050 degC the frit melts and is discharged into a case. Currently, technology has been developed of mush preparation and the design has been completed of a vitrification furnace featuring remote lid opening and closing, and of equipment for processing furnace emissions. (J.B.). 3 figs., 1 tab., 1 ref

  18. In-situ vitrification: pilot-scale development

    International Nuclear Information System (INIS)

    Timmerman, C.L.; Brouns, R.A.; Buelt, J.L.; Oma, K.H.

    1983-01-01

    Pacific Northwest Laboratory (PNL) is developing in-situ vitrification (ISV) as an in-place stabilization technique for buried radioactive and hazardous chemical wastes. The process melts the wastes and surrounding soil to produce a durable glass and crystalline waste form. These in situ vitrification process development testing and product evaluation studies are being conducted for the U.S. Department of Energy. This report discusses the results of four ISV pilot-scale field tests simulating radioactive and hazardous waste site conditions. The primary objectives of the field tests were to: demonstrate process scale-up from engineering-scale laboratory tests; verify equipment performance of the power system, electrodes and off-gas system; characterize the behavior of simulated wastes in the vitrified soil; identify waste losses to the off-gas system; and evaluate waste form durability. Test results have been encouraging. Process scaleup has been successfully demonstrated, with equipment and electrode performance equally as successful. The off-gas system effectively contained any volatile or entrained hazardous species. Vitrified soil analysis also indicated effective containment and a homogeneous distribution of nonradioactive radionuclide and hazardous waste simulants due to convective mixing during vitrification. Waste form leaching studies revealed that the ISV product has a durability similar to Pyrex glass

  19. Chemical engineering problems of radioactive waste fixation by vitrification

    International Nuclear Information System (INIS)

    Taylor, R.F.

    1985-01-01

    Basic features are reviewed of the chemical engineering problems faced in the vitrification of the high-level radioactive liquid wastes resulting from the reprocessing of nuclear fuel. After an outline of glass solution properties and formation kinetics the constituent elements of the vitrification route are examined in turn: waste feed evaporation and denitration, calcination, offgas treatment, and finally melting and product quality. Plant and experimental data for each stage are discussed with comparison between process routes and with reference to the underlying principles. Attention is drawn to the future need for higher trapping efficiencies and for dealing with a wider range of species in offgas treatments as higher burnup fuels are processed after shorter cooling times from reactor. Two areas of present study where deeper insight into underlying process mechanics is needed are, firstly, the association of waste material with glass formers in the wet or sinter stages and secondly their incorporation and mixing reaction in the melt. Fuller understanding here would bring direct benefit to process performance and handling. The problems discussed are not of a nature to jeopardize the vitrification routes but if product quality does come to rely heavily on process control then demonstrable confidence in the behaviour of the central physico-chemical interactions is indispensable. (author)

  20. Independent engineering review of the Hanford Waste Vitrification System

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The Hanford Waste Vitrification Plant (HWVP) was initiated in June 1987. The HWVP is an essential element of the plan to end present interim storage practices for defense wastes and to provide for permanent disposal. The project start was justified, in part, on efficient technology and design information transfer from the prototype Defense Waste Processing Facility (DWPF). Development of other serial Hanford Waste Vitrification System (HWVS) elements, such as the waste retrieval system for the double-shell tanks (DSTs), and the pretreatment system to reduce the waste volume converted into glass, also was required to accomplish permanent waste disposal. In July 1991, at the time of this review, the HWVP was in the Title 2 design phase. The objective of this technical assessment is to determine whether the status of the technology development and engineering practice is sufficient to provide reasonable assurance that the HWVP and the balance of the HWVS system will operate in an efficient and cost-effective manner. The criteria used to facilitate a judgment of potential successful operation are: vitrification of high-level radioactive waste from specified DSTs on a reasonably continuous basis; and glass produced with physical and chemical properties formally acknowledge as being acceptable for disposal in a repository for high-level radioactive waste. The criteria were proposed specifically for the Independent Engineering Review to focus that assessment effort. They are not represented as the criteria by which the Department will judge the prudence of the Project. 78 refs., 10 figs., 12 tabs.

  1. Preliminary Hanford Waste Vitrification Plan Waste Form Qualification Plan

    International Nuclear Information System (INIS)

    Nelson, J.L.

    1987-09-01

    This Waste Form Qualification Plan describes the waste form qualification activities that will be followed during the design and operation of the Hanford Waste Vitrification Plant to ensure that the vitrified Hanford defense high-level wastes will meet the acceptance requirements of the candidate geologic repositories for nuclear waste. This plan is based on the defense waste processing facility requirements. The content of this plan is based on the assumption that the Hanford Waste Vitrification Plant high-level waste form will be disposed of in one of the geologic repository projects. Proposed legislation currently under consideration by Congress may change or delay the repository site selection process. The impacts of this change will be assessed as details of the new legislation become available. The Plan describes activities, schedules, and programmatic interfaces. The Waste Form Qualification Plan is updated regularly to incorporate Hanford Waste Vitrification Plant-specific waste acceptance requirements and to serve as a controlled baseline plan from which changes in related programs can be incorporated. 10 refs., 5 figs., 5 tabs

  2. Utilisation des "algues-fourrage" en aquaculture

    OpenAIRE

    Chretiennot-dinet, Marie-josèphe; Robert, Rene; His, Edouard

    1986-01-01

    Les travaux concernant l'utilisation d'algues unicellulaires pour la nutrtion de larves et de juvéniles de bivalves d'intérêt commercial sont analysés. Sur une cinquantaine d'espèces d'algues testées, un dizaine seulement sont produites en grande quantité dans des écloseries commerciales sous le non "d'algues fourrage". Les principales espèces employées sont décrites et leurs caractéristiques majeures illustrées. Les critères permettant de retenir une espèce pour son utilisation en aquacultur...

  3. DEGRADATION PHOTOCATALYTIQUE DE L’ISOPROTURON EN SUSPENSIONS AQUEUSES DU BIOXYDE DE TITANE IRRADIEE PAR UV: CINETIQUE DE DEGRADATION, PRODUITS INTERMEDIAIRES ET MECANISME REACTIONNEL

    Directory of Open Access Journals (Sweden)

    S AZIZI

    2008-06-01

    sur la dégradation de IP a été également étudié. Les produits intermédiaires ont été identifiés par chromatographie liquide couplée à la spectrométrie de masse (LC-MS. Les produits principaux par ordre d'importance étaient les produits ortho- et méta hydroxylé et composés d'oxydation sur la chaînes urée qui mène au produit de la déméthylation

  4. Luther contre le protocole de Kyoto ou le retour des « indulgences ».

    Directory of Open Access Journals (Sweden)

    Bernard Jouve

    2005-05-01

    Full Text Available Le 16 février 2005 a marqué la mise en œuvre du Protocole de Kyoto. En fait, depuis l’annonce par la Russie, le 25 octobre 2004, de sa décision de ratifier ce protocole, l’affaire était entendue. Menacé depuis le refus des États-Unis, l’un des plus grands pollueurs de la planète, de ne pas le ratifier pour des raisons purement économiques alors que ce pays produit à lui seul 40 % des gaz à effet de serre ( ges , l’accord survenu à Kyoto en 1997 est enfin entériné et ...

  5. Methode des Rayons avec Calcul d’Intensite Appliquee a la Propagation Anormale (Method of Ray Intensity Calculation as Applied to Anomalous Propagation),

    Science.gov (United States)

    1986-06-01

    plus rapproch~es. Cette question, qui constitue en elle-mgme un domaine de recherche, d~ borde du cadre du present rapport. * Il est possible d’gtendre...par la commande JCL "PROPEX:T.’ qui produit le module ex~cutable "PROPAG:EX". TABLEAU I Bloc principal PROPAK *NOM DES ROUTINES FONCTION PROPAG...alise la r &mission des rayons r~fl~chis e77 SANS CLASSIFICATION 22 TABLEAU II Bloc utilitaire UTILPAK NOM DES ROUTINES FONCTION H - Calcule r la

  6. Progress of the Hanford Bulk Vitrification Project ICVTM Testing Program

    International Nuclear Information System (INIS)

    Witwer, K.S.; Woolery, D.W.; Dysland, E.J.

    2006-01-01

    In June 2004, the Bulk Vitrification Project was initiated with the intent to engineer, construct and operate a full-scale bulk vitrification pilot-plant to treat low-activity tank waste from Hanford tank 241-S-109. The project, managed by CH2M HILL Hanford Group, Inc., and performed by AMEC Earth and Environmental, Inc. (AMEC), will develop and operate a full-scale demonstration facility to exhibit the effectiveness of the bulk vitrification process under actual operating conditions. Since project initiation, testing has been undertaken using crucible-scale, 1/6 linear (engineering) scale, and full-scale vitrification equipment. Crucible-scale testing, coupled with engineering-scale testing, helps establish process limitations of selected glass formulations. Full-scale testing provides critical design verification of the In Container Vitrification (ICV) TM process both prior to and during operation of the demonstration facility. Beginning in late 2004, several full-scale tests have been performed at AMEC's test site, located adjacent to the U.S. Department of Energy's Hanford Site, in Richland, WA. Early testing involved verification of melt startup methodology, followed by subsequent full-melt testing to validate critical design parameters and demonstrate the 'Bottom-Up, Feed While Melt' process. As testing has progressed, design improvements have been identified and incorporated into each successive test. Full scale testing at AMEC's test site is currently scheduled to complete in 2006, with continued full-scale operational testing at the demonstration facility on the Hanford Site starting in 2007. Additional engineering scale testing will validate recommended glass formulations that have been provided by the Pacific Northwest National Laboratory (PNNL). This testing is expected to continue through 2006. This paper discusses the progress of the full-scale and engineering scale testing performed to date. Crucible-scale testing, a critical step in developing

  7. Behavior of mercury and iodine during vitrification of simulated alkaline Purex waste

    International Nuclear Information System (INIS)

    Holton, L.K.

    1981-09-01

    Current plans indicate that the high-level wastes stored at the Savannah River Plant will be solidified by vitrification. The behavior of mercury and iodine during the vitrification process is of concern because: mercury is present in the waste in high concentrations (0.1 to 2.8 wt%); mercury will react with iodine and the other halogens present in the waste during vitrification and; the mercury compounds formed will be volatilized from the vitrification process placing a high particulate load in the vitrification system off-gas. Twelve experiments were completed to study the behavior of mercury during vitrification of simulated SRP Purex waste. The mercury was completely volatized from the vitrification system in all experiments. The mercury reacted with iodine, chlorine and oxygen to form a fine particulate solid. Quantitative recovery of mercury compounds formed in the vitrification system off-gas was not possible due to high (37 to 90%) deposition of solids in the off-gas piping. The behavior of mercury and iodine was most strongly influenced by the vitrification system atmosphere. During experiments performed in which the oxygen content of the vitrification system atmosphere was low (< 1 vol%); iodine retention in the glass product was 27 to 55%, the mercury composition of the solids recovered from the off-gas scrub solutions was 75 to 85 wt%, and a small quantity of metallic mercury was recovered from the off-gas scrub solution. During experiments performed in which the oxygen content of the vitrification system atmosphere was high (20 vol%), iodide retention in the glass product was 3 to 15%, the mercury composition of the solids recovered from the off-gas scrub solutions was 60 to 80 wt%, and very little metallic mercury was recovered from the off-gas scrub solution

  8. OGM Diffusion des OGM et impact pour les agriculteurs : quels sont les liens ?

    Directory of Open Access Journals (Sweden)

    Lemarie Stéphane

    2001-05-01

    Full Text Available Les OGM actuellement sur le marché présentent des innovations sur des fonctions de protection des plantes. Selon les problèmes de protection des plantes, les gains des agriculteurs liés à l’adoption des OGM sont très variables. Cette hétérogénéité pose d’importants problèmes méthodologiques pour pouvoir estimer correctement la distribution des gains pour l’ensemble des agriculteurs. Une synthèse de plusieurs études américaines est réalisée ici et met bien en évidence la diversité des méthodes utilisées, chacune d’elles présentant ses avantages et ses limites. Globalement, si la diffusion des OGM est un fait indéniable, les études ne permettent pas de tirer des conclusions aussi nettes quant à l’impact des OGM pour tous les agriculteurs qui adoptent ces produits, et cela en particulier pour le soja. Cette absence de conclusion s’explique en grande partie par la difficulté à mesurer certains facteurs qui influencent le comportement d’adoption, comme par exemple la simplification de la conduite des cultures. En contrepartie, il faut noter que les études présentées ici ne prennent pas en compte un certain nombre d’effets indirects qui peuvent faire diminuer les gains des agriculteurs.

  9. Bitumen coating of the radio-active sludges from the effluent treatment plant at the Marcoule centre. Review of the progress reports 1, 2, 3 and 4 (1963); Enrobage par le bitume des boues radioactives de la station de traitement des effluents du centre de Marcoule. Mise au point des etats d'avancement 1, 2, 3 et 4. (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J.; Lefillatre, G.; Scheidhauer, J. [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1963-07-01

    Besides the very high activity liquids containing fission products, the chemical treatment of irradiated fuels produces a large volume of aqueous effluents and solid waste of relatively low radioactivity. These weakly active products can be eliminated in the ground, in a hydrographic land system or in the sea. Techniques of evaporation, of resin concentration, and of coprecipitation give rise to inorganic sludges with a high water content. All these residues occupy a large volume and represent a far from negligible weight. In the case of the sludge, their relative fluidity necessitates a conditioning guaranteeing safe storage. The solution to the problem will consist in passing directly from a liquid or a suspension, to a solid whose structure is homogeneous and whose matter is inert with respect to the storage medium (soil, sea, etc. ). We have proposed to coat the radioactive products with bitumen. This article is designed to give a review of the studies undertaken on this method. It consists of a progress report rather than a final assessment. (authors) [French] En dehors des liquides de tres haute activite contenant des produits de fission, le traitement chimique des combustibles irradies produit un volume important d'effluents aqueux et de residus solides de radioactivite relativement faible. Ces produits, faiblement actifs, peuvent etre elimines dans le sol, dans un systeme hydrographique terrestre ou dans la mer. Les techniques d'evaporation, de concentration sur resine, de coprecipitation, permettent la decontamination prealable des liquides. La coprecipitation donne naissance a des boues minerales dont la teneur en eau est elevee. Tous ces residus occupent un volume important et representent un poids non negligeable. Dans le cas des boues, leur fluidite relative exige un conditionnement donnant toutes garanties de securite au stockage. La solution du probleme consistera a passer directement d'un liquide ou d'une suspension a un solide

  10. Bitumen coating of the radio-active sludges from the effluent treatment plant at the Marcoule centre. Review of the progress reports 1, 2, 3 and 4 (1963); Enrobage par le bitume des boues radioactives de la station de traitement des effluents du centre de Marcoule. Mise au point des etats d'avancement 1, 2, 3 et 4. (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J; Lefillatre, G; Scheidhauer, J [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1963-07-01

    Besides the very high activity liquids containing fission products, the chemical treatment of irradiated fuels produces a large volume of aqueous effluents and solid waste of relatively low radioactivity. These weakly active products can be eliminated in the ground, in a hydrographic land system or in the sea. Techniques of evaporation, of resin concentration, and of coprecipitation give rise to inorganic sludges with a high water content. All these residues occupy a large volume and represent a far from negligible weight. In the case of the sludge, their relative fluidity necessitates a conditioning guaranteeing safe storage. The solution to the problem will consist in passing directly from a liquid or a suspension, to a solid whose structure is homogeneous and whose matter is inert with respect to the storage medium (soil, sea, etc. ). We have proposed to coat the radioactive products with bitumen. This article is designed to give a review of the studies undertaken on this method. It consists of a progress report rather than a final assessment. (authors) [French] En dehors des liquides de tres haute activite contenant des produits de fission, le traitement chimique des combustibles irradies produit un volume important d'effluents aqueux et de residus solides de radioactivite relativement faible. Ces produits, faiblement actifs, peuvent etre elimines dans le sol, dans un systeme hydrographique terrestre ou dans la mer. Les techniques d'evaporation, de concentration sur resine, de coprecipitation, permettent la decontamination prealable des liquides. La coprecipitation donne naissance a des boues minerales dont la teneur en eau est elevee. Tous ces residus occupent un volume important et representent un poids non negligeable. Dans le cas des boues, leur fluidite relative exige un conditionnement donnant toutes garanties de securite au stockage. La solution du probleme consistera a passer directement d'un liquide ou d'une suspension a un solide dont la structure

  11. Thermochemical Conversion of Lignin for Fuels and Chemicals: A Review Conversion thermochimique de la lignine en carburants et produits chimiques : une revue

    Directory of Open Access Journals (Sweden)

    Joffres B.

    2013-10-01

    Full Text Available Lignin is one of the biomass components potentially usable as renewable resource to produce fuels or chemicals. After separation from the lignocellulosic matrix, this macromolecule is nowadays essentially valorized by combustion in paper mills. If second generation ethanol is produced in the future from lignocellulosic biomass, some increasing reserves of lignin will be available in addition to the ones coming from the paper industry. The main thermochemical ways such as pyrolysis, solvolysis, hydrothermal conversion and hydroconversion considered for the valorization of the lignin are reviewed in this article. La lignine est une des composantes de la biomasse lignocellulosique potentiellement valorisable comme ressource renouvelable pour la production de carburants ou de produits chimiques. Après séparation de la matrice lignocellulosique, cette macromolécule est de nos jours essentiellement utilisée comme combustible dans l’industrie papetière. Outre cette filière papetière, la production d’éthanol de seconde génération à partir de la cellulose aura comme conséquence la mise à disponibilité d’encore plus grandes quantités de lignine. De nouvelles applications pourront donc être proposées pour l’utilisation de cette bio-ressource. Les différentes voies thermochimiques : pyrolyse, solvolyse, conversion hydrothermale et hydroconversion envisagées pour la valorisation de la lignine sont décrites dans cet article.

  12. Analyse des effets de deux modalités de constitution des groupes dans un dispositif hybride de formation à distance

    Directory of Open Access Journals (Sweden)

    Christian Depover

    2004-01-01

    Full Text Available Cette étude porte sur les effets de deux modalités de constitution des groupes (spontané versus contrasté dans un dispositif hybride de formation à distance destiné à des étudiants universitaires. Les scénarios d’apprentissage mis en œuvre à l’occasion de cette expérience reposent sur l’utilisation des cartes conceptuelles comme support au travail collaboratif. Les résultats observés n’ont pas permis de mettre en évidence de différence quant à la densité conceptuelle des cartes ou au nombre d’unités de sens produites. Par contre, il apparaît que les unités de sens qui concernent les activités de planification et les commentaires métacognitifs sont nettement plus nombreuses au sein des groupes constitués par pairage contrasté. Une corrélation positive entre l’intensité des interactions à l’intérieur du forum et la densité conceptuelle des cartes produites a également été mise en évidence pour les groupes constitués sur la base d’un pairage contrasté. En ce qui concerne le pairage spontané, nos résultats indiquent que les paires constituées témoignent d’un comportement plus homogène, se révèlent plus collaboratives et consacrent moins d’effort à la planification du travail de groupe.

  13. Gestion des risques, valorisation et stratégie : applications aux industries agro-alimentaire et de transport aérien

    OpenAIRE

    Hassane Amadou, Rahila

    2014-01-01

    Ce travail de recherche apporte des éléments de compréhension supplémentaires sur l’impact des stratégies de gestion des risques sur la valeur et sur la stratégie des entreprises. Une première analyse examine un échantillon de 378 observations d’entreprises du secteur agroalimentaire sur 5 ans. Il ressort de cette analyse que l’intensité d’utilisation des produits dérivés pour couvrir les risques de change, taux d’intérêt et prix des matières premières n’influence pas sensiblement la valeur d...

  14. Le marché des jeux vidéo

    OpenAIRE

    Trémel, Laurent

    2012-01-01

    Basé sur les travaux menés par l’auteur sur la pratique des jeux vidéo depuis une dizaine d’années, l’article se situe dans une perspective de sociologie critique et expose les logiques développées dans les jeux vidéo les plus pratiqués, et comment celles‑ci répondent aux attentes d’un « public cible ». En déconstruisant certains artefacts statistiques conçus pour modifier l’image sociale de ces produits, le propos révèle quelles sont les intentions des industriels du loisir et comment ils pe...

  15. Review of FY 2001 Development Work for Vitrification of Sodium Bearing Waste

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Dean Dalton; Barnes, Charles Marshall

    2002-09-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated by the Settlement Agreement between the Department of Energy and the State of Idaho. This report discusses significant findings from vitrification technology development during 2001 and their impacts on the design basis for SBW vitrification.

  16. Vitrification of plutonium at Rocky Flats the argument for a pilot plant

    Energy Technology Data Exchange (ETDEWEB)

    Moore, L. [Rocky Mountain Peace Center, Boulder, CO (United States)

    1996-05-01

    Current plans for stabilizing and storing the plutonium at Rocky Flats Plant fail to put the material in a form suitable for disposition and resistant to proliferation. Vitrification should be considered as an alternate technology. The vitrification should begin with a small-scale pilot plant.

  17. An improved vitrification protocol for equine immature oocytes, resulting in a first live foal

    NARCIS (Netherlands)

    Ortiz-Escribano, N.; Bogado Pascottini, O.; Woelders, H.; Vandenberghe, L.; Schauwer, De C.; Govaere, J.; Abbeel, Van den E.; Vullers, T.; Ververs, C.; Roels, K.; De Velde, Van M.; Soom, van A.; Smits, K.

    2018-01-01

    Background: The success rate for vitrification of immature equine oocytes is low. Although vitrified-warmed oocytes are able to mature, further embryonic development appears to be compromised. Objectives: The aim of this study was to compare two vitrification protocols, and to examine the effect of

  18. Review of FY2001 Development Work for Vitrification of Sodium Bearing Waste

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, C.M.; Taylor, D.D.

    2002-09-09

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated by the Settlement Agreement between the Department of Energy and the State of Idaho. This report discusses significant findings from vitrification technology development during 2001 and their impacts on the design basis for SBW vitrification.

  19. Design of equipment used for high-level waste vitrification at the West Valley Demonstration Project

    International Nuclear Information System (INIS)

    Vance, R.F.; Brill, B.A.; Carl, D.E.

    1997-06-01

    The equipment as designed, started, and operated for high-level radioactive waste vitrification at the West Valley Demonstration Project in western New York State is described. Equipment for the processes of melter feed make-up, vitrification, canister handling, and off-gas treatment are included. For each item of equipment the functional requirements, process description, and hardware descriptions are presented

  20. Review of FY2001 Development Work for Vitrification of Sodium Bearing Waste

    International Nuclear Information System (INIS)

    Barnes, C.M.; Taylor, D.D.

    2002-01-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated by the Settlement Agreement between the Department of Energy and the State of Idaho. This report discusses significant findings from vitrification technology development during 2001 and their impacts on the design basis for SBW vitrification

  1. Chemical durability of soda-lime-aluminosilicate glass for radioactive waste vitrification

    International Nuclear Information System (INIS)

    Eppler, F.H.; Yim, M.S.

    1998-01-01

    Vitrification has been identified as one of the most viable waste treatment alternatives for nuclear waste disposal. Currently, the most popular glass compositions being selected for vitrification are the borosilicate family of glasses. Another popular type that has been around in glass industry is the soda-lime-silicate variety, which has often been characterized as the least durable and a poor candidate for radioactive waste vitrification. By replacing the boron constituent with a cheaper substitute, such as silica, the cost of vitrification processing can be reduced. At the same time, addition of network intermediates such as Al 2 O 3 to the glass composition increases the environmental durability of the glass. The objective of this study is to examine the ability of the soda-lime-aluminosilicate glass as an alternative vitrification tool for the disposal of radioactive waste and to investigate the sensitivity of product chemical durability to variations in composition

  2. Hanford low-level vitrification melter testing -- Master list of data submittals

    International Nuclear Information System (INIS)

    Hendrickson, D.W.

    1995-01-01

    The Westinghouse Hanford Company (WHC) is conducting a two-phased effort to evaluate melter system technologies for vitrification of liquid low-level radioactive waste (LLW) streams. The evaluation effort includes demonstration testing of selected glass melter technologies and technical reports regarding the applicability of the glass melter technologies to the vitrification of Hanford LLW tank waste. The scope of this document is to identify and list vendor document submittals in technology demonstration support of the Hanford Low-Level Waste Vitrification melter testing program. The scope of this document is limited to those documents responsive to the Statement of Work, accepted and issued by the LLW Vitrification Program. The purpose of such a list is to maintain configuration control of vendor supplied data and to enable ready access to, and application of, vendor supplied data in the evaluation of melter technologies for the vitrification of Hanford low-level tank wastes

  3. Comment constituer et traiter des corpus issus des médias sociaux à l’aide des CAQDAS? NVivo : un instrument pour l’analyse des discours numériques

    Directory of Open Access Journals (Sweden)

    Ferrari Giovannipaolo

    2015-01-01

    Full Text Available Avec l’apparition des médias sociaux, le chercheur en Sciences Humaines et Sociales a vu s’ouvrir des possibilités de création de corpus à partir des données disponibles en ligne. Le risque dans ces modalités de création de corpus est de créer de grandes bases de données difficilement gérables avec les outils traditionnels et surtout dans le cadre d’une recherche qualitative. Pour cette raison, il semble important de mobiliser des outils numériques pour l’aide à la recherche. Ces logiciels sont appelés CAQDAS. Cette contribution montre comment les utiliser pour une enquête de terrain en ligne ou numérique afin d’organiser et d’analyser un corpus. Ce corpus est constitué en vue d’une analyse des discours produits dans le contexte professionnel de la radio utilisant les nouveaux médias.

  4. Material chemistry challenges in vitrification of high level radioactive waste

    International Nuclear Information System (INIS)

    Kaushik, C.P.

    2008-01-01

    Full text: Nuclear technology with an affective environmental management plan and focused attention on safety measures is a much cleaner source of electricity generation as compared to other sources. With this perspective, India has undertaken nuclear energy program to share substantial part of future need of power. Safe containment and isolation of nuclear waste from human environment is an indispensable part of this programme. Majority of radioactivity in the entire nuclear fuel cycle is high level radioactive liquid waste (HLW), which is getting generated during reprocessing of spent nuclear fuels. A three stage strategy for management of HLW has been adopted in India. This involves (i) immobilization of waste oxides in stable and inert solid matrices, (ii) interim retrievable storage of the conditioned waste product under continuous cooling and (iii) disposal in deep geological formation. Borosilicate glass matrix has been adopted in India for immobilization of HLW. Material issue are very important during the entire process of waste immobilization. Performance of the materials used in nuclear waste management determines its safety/hazards. Material chemistry therefore has a significant bearing on immobilization science and its technological development for management of HLW. The choice of suitable waste form to deploy for nuclear waste immobilization is difficult decision and the durability of the conditioned product is not the sole criterion. In any immobilization process, where radioactive materials are involved, the process and operational conditions play an important role in final selection of a suitable glass formulation. In remotely operated vitrification process, study of chemistry of materials like glass, melter, materials of construction of other equipment under high temperature and hostile corrosive condition assume significance for safe and un-interrupted vitrification of radioactive to ensure its isolation waste from human environment. The present

  5. Cryopreservation of mouse embryos by ethylene glycol-based vitrification.

    Science.gov (United States)

    Mochida, Keiji; Hasegawa, Ayumi; Taguma, Kyuichi; Yoshiki, Atsushi; Ogura, Atsuo

    2011-11-18

    Cryopreservation of mouse embryos is a technological basis that supports biomedical sciences, because many strains of mice have been produced by genetic modifications and the number is consistently increasing year by year. Its technical development started with slow freezing methods in the 1970s(1), then followed by vitrification methods developed in the late 1980s(2). Generally, the latter technique is advantageous in its quickness, simplicity, and high survivability of recovered embryos. However, the cryoprotectants contained are highly toxic and may affect subsequent embryo development. Therefore, the technique was not applicable to certain strains of mice, even when the solutions are cooled to 4°C to mitigate the toxic effect during embryo handling. At the RIKEN BioResource Center, more than 5000 mouse strains with different genetic backgrounds and phenotypes are maintained(3), and therefore we have optimized a vitrification technique with which we can cryopreserve embryos from many different strains of mice, with the benefits of high embryo survival after vitrifying and thawing (or liquefying, more precisely) at the ambient temperature(4). Here, we present a vitrification method for mouse embryos that has been successfully used at our center. The cryopreservation solution contains ethylene glycol instead of DMSO to minimize the toxicity to embryos(5). It also contains Ficoll and sucrose for prevention of devitrification and osmotic adjustment, respectively. Embryos can be handled at room temperature and transferred into liquid nitrogen within 5 min. Because the original method was optimized for plastic straws as containers, we have slightly modified the protocol for cryotubes, which are more easily accessible in laboratories and more resistant to physical damages. We also describe the procedure of thawing vitrified embryos in detail because it is a critical step for efficient recovery of live mice. These methodologies would be helpful to researchers and

  6. Caffeine and oocyte vitrification: Sheep as an animal model

    Directory of Open Access Journals (Sweden)

    Adel R. Moawad

    Full Text Available Oocyte cryopreservation is valuable way of preserving the female germ line. Vitrification of immature ovine oocytes decreased the levels of both maturation promoting factor (MPF and mitogen-activated protein kinase (MAPK in metaphase II (MII oocytes after IVM. Our aims were 1 to evaluate the effects of vitrification of ovine GV-oocytes on spindle assembly, MPF/MAP kinases activities, and preimplantation development following IVM and IVF, 2 to elucidate the impact of caffeine supplementation during IVM on the quality and development of vitrified/warmed ovine GV-oocytes. Cumulus-oocyte complexes (COCs from mature ewes were divided into vitrified, toxicity and control groups. Oocytes from each group were matured in vitro for 18 h in caffeine free IVM medium and denuded oocytes were incubated in maturation medium supplemented with 10 mM (+ or without (− caffeine for another 6 h. At 24 h.p.m., oocytes were evaluated for spindle configuration, MPF/MAP kinases activities or fertilized and cultured in vitro for 7 days. Caffeine supplementation did not significantly affect the percentages of oocytes with normal spindle assembly in all the groups. Caffeine supplementation during IVM did not increase the activities of both kinases in vitrified groups. Cleavage and blastocyst development were significantly lower in vitrified groups than in control. Caffeine supplementation during the last 6 h of IVM did not significantly improve the cleavage and blastocyst rates in vitrified group. In conclusion, caffeine treatment during in vitro maturation has no positive impact on the quality and development of vitrified/warmed ovine GV-oocytes after IVM/IVF and embryo culture. Keywords: Caffeine, GV, MPF/MAPK, Oocytes, Ovine, Vitrification

  7. Flux d'énergie dans des systèmes d'élevage laitiers contrastés : élaboration d'indicateurs et analyse de la diversité inter et intra-territoire

    OpenAIRE

    Vigne, Mathieu

    2012-01-01

    Le doublement futur de la demande mondiale en produits laitiers nécessite de concevoir des systèmes plus productifs mais également écologiquement plus durables. Les objectifs de la thèse étaient i) d'évaluer l'intérêt de la prise en compte de l'ensemble des énergies mobilisées dans un système d'élevage (énergie fossile, énergie calorifique contenue dans les produits, énergie liée au travail humain et animal et énergie solaire) à travers des méthodes existantes ou originales pour développer de...

  8. Niveaux de résidus de pesticides organochlorés dans les produits ...

    African Journals Online (AJOL)

    L'objectif de cette étude est de déterminer le contenu en résidus de quelques pesticides organochlorés du cacao masse, des tourteaux et du beurre de cacao. Pour se faire, 75 échantillons de fèves de cacao ont été prélevés auprès des planteurs et coopératives du département d'Agboville et des exportateurs des ports de ...

  9. Technology transfer and commercialization of in situ vitrification technology

    International Nuclear Information System (INIS)

    Williams, L.D.; Hansen, J.E.

    1992-01-01

    In situ vitrification (ISV) technology was conceived and an initial proof-of-principle test was conducted in 1980 by Battelle Memorial Institute for the U.S. Department of Energy (DOE) at Pacific Northwest Laboratory (PNL). The technology was rapidly developed through bench, engineering pilot, and large scales in the following years. In 1986, DOE granted rights to the basic ISV patent to Battelle in exchange for a commitment to commercialize the technology. Geosafe Corporation was established as the operating entity to accomplish the commercialization objective. This paper describes and provides status information on the technology transfer and commercialization effort

  10. La Hague Continuous Improvement Program: Enhancement of the Vitrification Throughput

    International Nuclear Information System (INIS)

    Petitjean, V.; De Vera, R.; Hollebecque, J.F.; Tronche, E.; Flament, T.; Pereira Mendes, F.; Prod'homme, A.

    2006-01-01

    The vitrification of high-level liquid waste produced from nuclear fuel reprocessing has been carried out industrially for over 25 years by AREVA/COGEMA, with two main objectives: containment of the long lived fission products and reduction of the final volume of waste. At the 'La Hague' plant, in the 'R7' and 'T7' facilities, vitrified waste is obtained by first evaporating and calcining the nitric acid feed solution-containing fission products in calciners. The product-named calcinate- is then fed together with glass frit into induction-heated metallic melters to produce the so-called R7/T7 glass, well known for its excellent containment properties. Both facilities are equipped with three processing lines. In the near future the increase of the fuel burn-up will influence the amount of fission product solutions to be processed at R7/T7. As a consequence, in order to prepare these changes, it is necessary to feed the calciner at higher flow-rates. Consistent and medium-term R and D programs led by CEA (French Atomic Energy Commission, the AREVA/COGEMA's R and D and R and T provider), AREVA/COGEMA (Industrial Operator) and AREVA/SGN (AREVA/COGEMA's Engineering), and associated to the industrial feed back of AREVA/COGEMA operations, have allowed continuous improvement of the process since 1998: - The efficiency and limitation of the equipment have been studied and solutions for technological improvements have been proposed whenever necessary, - The increase of the feeding flow-rate has been implemented on the improved CEA test rig (so called PEV, Evolutional Prototype of Vitrification) and adapted by AREVA/SGN for the La Hague plant using their modeling studies; the results obtained during this test confirmed the technological and industrial feasibility of the improvements achieved, - After all necessary improved equipments have been implemented in R7/T7 facilities, and a specific campaign has been performed on the R7 facility by AREVA/COGEMA. The flow-rate to the

  11. The vitrification of high level wastes using microwave power

    International Nuclear Information System (INIS)

    Hardwick, W.H.; Gayler, R.; Murphy, V.

    1981-01-01

    A process for radioactive waste vitrification which exploits advantages peculiar to microwave heating is under development. The advantages claimed are the removal of the heat source from the radioactive environment, the elimination of heat transfer barriers by direct coupling of the energy with the process materials, and the ability to evaporate liquors absorbed in a glass fibre matrix which constitutes the glass forming additive. This glass fibre matrix which constitutes the glass forming additive. This glass fibre is also used to filter off-gases and give a condensate free of solids. The fibre loaded with dried waste is converted to a homogeneous glass by melting using microwave power. (orig./DG)

  12. HLW vitrification in France industrial experience and glass quality

    International Nuclear Information System (INIS)

    Desvaux, J.L.; Delahaye, P.

    1994-01-01

    This paper describes the vitrification process, the technology and process improvements at the La Hague plant in R 7 and T 7 facilities. The main achievements relate to the process flexibility, the reliability of the equipment and solid waste management. The quality of the vitrified glass produced and canisters compliance with agreed specifications are demonstrated through characterization studies. Since the active start-up of R 7/T 7 facilities, canisters compliance with specifications relies upon a complete quality assurance/quality control program including process control. 1 tab., 1 fig

  13. Safety aspects with regard to plutonium vitrification techniques

    International Nuclear Information System (INIS)

    Gray, L.W.; Kan, T.

    1995-01-01

    Substantial inventories of excess plutonium are expected to result from dismantling US and Russian nuclear weapons. Disposition of this material should be a high priority in both countries. Various disposition options are under consideration. One option is to vitrify the plutonium with the addition of 137 Cs or high-level waste to act as a deterrent to proliferation. The primary safety problem associated with vitrification of plutonium is to avoid criticality in form fabrication and in the final repository over geologic time. Recovery should be as difficult (costly) as the recovery of plutonium from spent fuel

  14. In situ vitrification and the effects of soil additives

    International Nuclear Information System (INIS)

    Piepel, G.F.; Shade, J.W.

    1992-01-01

    This paper presents a case study involving in situ vitrification (ISV), a process for immobilizing chemical or nuclear wastes in soil by melting-dissolving the contaminated soil into a glass block. One goal of the study was to investigate how viscosity and electrical conductivity were affected by mixing CaO and Na 2 O with soil. A three-component constrained-region mixture experiment design was generated and the viscosity and electrical conductivity data collected. Several second-order mixture models were considered, and the Box-Cox transformation technique was applied to select property transformations. The fitted models were used to produce contour and component effects plots

  15. Hanford Waste Vitrification Plant Project Waste Form Qualification Program Plan

    International Nuclear Information System (INIS)

    Randklev, E.H.

    1993-06-01

    The US Department of Energy has created a waste acceptance process to help guide the overall program for the disposal of high-level nuclear waste in a federal repository. This Waste Form Qualification Program Plan describes the hierarchy of strategies used by the Hanford Waste Vitrification Plant Project to satisfy the waste form qualification obligations of that waste acceptance process. A description of the functional relationship of the participants contributing to completing this objective is provided. The major activities, products, providers, and associated scheduling for implementing the strategies also are presented

  16. Hanford Waste Vitrification Project Building limited scope risk assessment

    International Nuclear Information System (INIS)

    Braun, D.J.; Lindberg, S.E.; Reardon, M.F.; Wilson, G.P.

    1992-10-01

    A limited scope risk assessment was performed on the preliminary design of a high-level waste interim storage facility. The Canister Storage Building (CSB) facility will be built to support remediation at the US Department of Energy Hanford Site in Washington State. The CSB will be part of the support facilities for a high level Hanford Waste Vitrification Plant (HWVP). The limited scope risk assessment is based on a preliminary design which uses forced air circulation systems to move air through the building vault. The current building design calls for natural circulation to move air through the building vault

  17. Vitrification of actinide solutions in SRS separations facilities

    International Nuclear Information System (INIS)

    Minichan, R.L.; Ramsey, W.G.

    1995-01-01

    The actinide vitrification system being developed at SRS provides the capability to convert specialized or unique forms of nuclear material into a stable solid glass product that can be safely shipped, stored or reprocessed according to the DOE complex mission. This project is an application of technology developed through funds from the Office of Technology Development (OTD). This technology is ideally suited for vitrifying relatively small quantities of fissile or special nuclear material since it is designed to be critically safe. Successful demonstration of this system to safely vitrify radioactive material could open up numerous opportunities for transferring this technology to applications throughout the DOE complex

  18. Short term forecasting of petroleum product demand in France; Modelisation a court terme des consommations de produits petroliers en France

    Energy Technology Data Exchange (ETDEWEB)

    Cadren, M

    1998-06-23

    The analysis of petroleum product demand became a privileged thrust of research following the modifications in terms of structure and level of the petroleum markets since eighties. The greatest importance to econometrics models of Energy demand, joint works about nonstationary data, explained the development of error-correction models and the co-integration. In this context, the short term econometrics modelling of petroleum product demand does not only focus on forecasts but also on the measure of the gain acquired from using error-correction techniques and co-integration. It`s filling to take the influence of technical improvement and environment pressures into account in econometrics modelling of petroleum products demand. The first part presents the evolution of Energy Demand in France and more particularly the petroleum product demand since 1986. The objective is to determine the main characteristics of each product, which will help us to analyse and validate the econometrics models. The second part focus on the recent developments in times series modelling. We study the problem of nonstationary data and expose different unit root tests. We examine the main approaches to univariate and multivariate modelling with nonstationary data and distinguish the forecasts of the latter`s. The third part is intended to applications; its objective is to illustrate the theoretic developments of the second part with a comparison between the performances of different approaches (approach Box and Jenkins, Johansen approach`s and structural approach). The models will be applied to the main French petroleum market. The observed asymmetrical demand behaviour is also considered. (author) 153 refs.

  19. Utilisations des produits forestiers autres que le bois (PFAB au Cameroun. Cas du projet forestier du Mont Koupé

    Directory of Open Access Journals (Sweden)

    Tshiamala-Tshibangu, N.

    1999-01-01

    Full Text Available Utilization of Non Wood Forest Products in Cameroon. The Case of the Forest Project of the Koupe Mont. A survey using some elements of the RAA method described by Gueye and Schoonmaker (4 led to the identification of 26 plant species belonging to 15 botanical families in the Koupe Mountain forest project (Cameroon. This study deals with the utilization of non wood forest products. The small number of species reported by the study can be explained by the fact that the survey took into account only the species really used by the local population and not all those present in the forest. Study established that : harvesting and utilization of these resources generate incomes, create jobs and allow local population satisfying their needs of food, fodder, medicine, resins, dyes, fiber, handicrafts, flavorings, building materials... Unfortunately, due to organizational problems and absence of structures, the commercialization of these products does not contribute to the welfare of the local population and to the development of the production area which remained dominated by agriculture. In order to ensure the perennial characteristic of the highly demanded species, measures permitting their conservation and their sustainable utilization such as : regulation of the type and the rate of harvesting, use of non destructive harvesting techniques, their domestication through agroforestry techniques, their introduction in home-gardens... should be taken. The management of these resources requires the involvement and effective participation of the rural community. This can be achieved through mass sensitization, training and use of the media.

  20. Composition chimique du netetu, condiment alimentaire produit par fermentation des graines de caroubier africain Parkia biglobosa (Jacq. Benth.

    Directory of Open Access Journals (Sweden)

    Wathelet B.

    2000-01-01

    Full Text Available Chemical composition of netetu, a food condiment from fermented Parkia biglobosa seeds. The seed oils and cakes of netetu of different origins available on the Senegalian market have been studied to evaluate the nutritional potentialities of this important food condiment used in many African countries. The total oil content ranged from 141 to 349 g per kg. Careful gas chromatography and GC-MS (Gas Chromatography-Mass Spectrometry investigations revealed seven major fatty acids among which linoleic (41.9-46.8/ of the total fatty acids, oleic (12.6-14.6/, palmitic (10.2-11.3/, stearic (10.0-13.4/, and behenic (12.6-13.4/ predominate. Significant differences were observed between fermented and non-fermented seeds as well as between netetu of different origins. The tocopherol content was found very low (17.7 to 30.6 mg per 100g fat. The total amino acid patterns showed that beside high level of proteins (331 a 540 g per kg and interesting levels of essential constituents, there is an important deficiency of tryptophane, cysteine, methionine and threonine.

  1. L’agriculture urbaine à Meknès (Maroc à la croisée des chemins : disparition d’une agriculture marginalisée ou retour de la cité jardin?

    Directory of Open Access Journals (Sweden)

    Patrick Dugué

    2015-10-01

    Full Text Available L’accroissement démographique rapide des villes au sud de la méditerranée s’est accompagné d’une urbanisation consommatrice de terres fertiles. Toutefois des espaces interstitiels difficilement constructibles, entre les espaces construits, hébergent encore des exploitations agricoles. C’est le cas notamment des 3 vallées traversant l’agglomération de Meknès, au Maroc. Sur la base d’enquêtes auprès de 80 agriculteurs et 42 consommateurs et d’entretiens avec des décideurs et commerçants de cette ville, nous avons montré la diversité des systèmes de production présents dans la ville (maraîchage et élevage laitier et à viande principalement. Malgré la proximité de la ville, peu de produits sont vendus directement aux consommateurs. Dans le cas du maraîchage, une action urgente est à engager pour fournir de l’eau d’irrigation de qualité aux agriculteurs de ces vallées afin qu’ils renoncent au détournement des eaux usées produites par la ville. Les meilleurs atouts de l’agriculture dans les villes au sud de la Méditerranée sont d’une part de rendre possible l’existence de paysages verdoyants et ouverts permettant d’améliorer le bien-être des citadins et l’attractivité touristique de ces villes et d’autre part l’intérêt récent de citadins pour des produits de qualité vendus en circuit court.

  2. The role of frit in nuclear waste vitrification

    International Nuclear Information System (INIS)

    Vienna, J.D.; Smith, P.A.; Dorn, D.A.; Hrma, P.

    1994-04-01

    Vitrification of nuclear waste requires additives which are often vitrified independently to form a frit. Frit composition is formulated to meet the needs of glass composition and processing. The effects of frit on melter feed and melt processing, glass acceptance, and waste loading is of practical interest in understanding the trade-offs associated with the competing demands placed on frit composition. Melter feed yield stress, viscosity and durability of frits and corresponding waste glasses as well as the kinetics of elementary melting processes have been measured. The results illustrate the competing requirements on frit. Four frits (FY91, FY93, HW39-4, and SR202) and simulated neutralized current acid waste (NCAW) were used in this study. The experimental evidence shows that optimization of frit for one processing related property often results in poorer performance for the remaining properties. The difficulties associated with maximum waste loading and durability are elucidated for glasses which could be processed using technology available for the previously proposed Hanford Waste Vitrification Plant

  3. Ash from a pulp mill boiler--characterisation and vitrification.

    Science.gov (United States)

    Ribeiro, Ana S M; Monteiro, Regina C C; Davim, Erika J R; Fernandes, M Helena V

    2010-07-15

    The physical, chemical and mineralogical characterisation of the ash resulting from a pulp mill boiler was performed in order to investigate the valorisation of this waste material through the production of added-value glassy materials. The ash had a particle size distribution in the range 0.06-53 microm, and a high amount of SiO(2) (approximately 82 wt%), which was present as quartz. To favour the vitrification of the ash and to obtain a melt with an adequate viscosity to cast into a mould, different amounts of Na(2)O were added to act as fluxing agent. A batch with 80 wt% waste load melted at 1350 degrees C resulting in a homogeneous transparent green-coloured glass with good workability. The characterisation of the produced glass by differential thermal analysis and dilatometry showed that this glass presents a stable thermal behaviour. Standard leaching tests revealed that the concentration of heavy metals in the leaching solution was lower than those allowed by the Normative. As a conclusion, by vitrification of batch compositions with adequate waste load and additive content it is possible to produce an ash-based glass that may be used in similar applications as a conventional silicate glass inclusively as a building ecomaterial. 2010 Elsevier B.V. All rights reserved.

  4. Transportable vitrification system demonstration on mixed waste. Revision 1

    International Nuclear Information System (INIS)

    Zamecnik, J.R.; Whitehouse, J.C.; Wilson, C.N.; Van Ryn, F.R.

    1998-01-01

    The Transportable Vitrification System (TVS) is a large scale, fully integrated, vitrification system for the treatment of low-level and mixed wastes in the form of sludges, soils, incinerator ash, and many other waste streams. It was demonstrated on surrogate waste at Clemson University and at the Oak Ridge Reservation (ORR) prior to treating actual mixed waste. Treatment of a combination of dried B and C Pond sludge and CNF sludge was successfully demonstrated at ORR in 1997. The demonstration produced 7,616 kg of glass from 7,328 kg of mixed wastes with a 60% reduction in volume. Glass formulations for the wastes treated were developed using a combination of laboratory crucible studies with the actual wastes and small melter studies at Clemson with both surrogate and actual wastes. Initial characterization of the B and C Pond sludge had not shown the presence of carbon or fluoride, which required a modified glass formulation be developed to maintain proper glass redox and viscosity. The CNF sludge challenges the glass formulations due to high levels of phosphate and iron. The demonstration was delayed several times by permitting problems, a glass leak, and electrical problems. The demonstration showed that the two wastes could be successfully vitrified, although the design glass production rate was not achieved. The glass produced met the Universal Treatment Standards and the emissions from the TVS were well within the allowable permit limits

  5. Transportable vitrification system demonstration on mixed waste. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Zamecnik, J.R.; Whitehouse, J.C. [Westinghouse Savannah River Co., Aiken, SC (United States); Wilson, C.N. [Lockheed Martin Hanford Corp., Richland, WA (United States); Van Ryn, F.R. [Bechtel Jacobs Co., Oak Ridge, TN (United States)

    1998-04-22

    The Transportable Vitrification System (TVS) is a large scale, fully integrated, vitrification system for the treatment of low-level and mixed wastes in the form of sludges, soils, incinerator ash, and many other waste streams. It was demonstrated on surrogate waste at Clemson University and at the Oak Ridge Reservation (ORR) prior to treating actual mixed waste. Treatment of a combination of dried B and C Pond sludge and CNF sludge was successfully demonstrated at ORR in 1997. The demonstration produced 7,616 kg of glass from 7,328 kg of mixed wastes with a 60% reduction in volume. Glass formulations for the wastes treated were developed using a combination of laboratory crucible studies with the actual wastes and small melter studies at Clemson with both surrogate and actual wastes. Initial characterization of the B and C Pond sludge had not shown the presence of carbon or fluoride, which required a modified glass formulation be developed to maintain proper glass redox and viscosity. The CNF sludge challenges the glass formulations due to high levels of phosphate and iron. The demonstration was delayed several times by permitting problems, a glass leak, and electrical problems. The demonstration showed that the two wastes could be successfully vitrified, although the design glass production rate was not achieved. The glass produced met the Universal Treatment Standards and the emissions from the TVS were well within the allowable permit limits.

  6. Glass formulation for phase 1 high-level waste vitrification

    Energy Technology Data Exchange (ETDEWEB)

    Vienna, J.D.; Hrma, P.R.

    1996-04-01

    The purpose of this study is to provide potential glass formulations for prospective Phase 1 High-Level Waste (HLW) vitrification at Hanford. The results reported here will be used to aid in developing a Phase 1 HLW vitrification request for proposal (RFP) and facilitate the evaluation of ensuing proposals. The following factors were considered in the glass formulation effort: impact on total glass volume of requiring the vendor to process each of the tank compositions independently versus as a blend; effects of imposing typical values of B{sub 2}O{sub 3} content and waste loading in HLW borosilicate glasses as restrictions on the vendors (according to WAPS 1995, the typical values are 5--10 wt% B{sub 2}O{sub 3} and 20--40 wt% waste oxide loading); impacts of restricting the processing temperature to 1,150 C on eventual glass volume; and effects of caustic washing on any of the selected tank wastes relative to glass volume.

  7. Cryopreservation of cocoa (Theobroma cacao L.) somatic embryos by vitrification.

    Science.gov (United States)

    Adu-Gyamfi, Raphael; Wetten, Andy

    2012-01-01

    Losses of cultivated cocoa (Theobroma cacao L.) due to diseases and continued depletion of forests that harbour the wild progenitors of the crop make ex situ conservation of cocoa germplasm of paramount importance. In order to enhance security of in situ germplasm collections, 2-3 mm floral-derived secondary somatic embryos were cryopreserved by vitrification. This work demonstrates the most uncomplicated clonal cocoa cryopreservation. Optimal post-cryostorage survival (74.5 percent) was achieved by 5 d preculture of SSEs on 0.5 M sucrose medium followed by 60 min dehydration in cold PVS2. To minimise free radical related cryo-injury, cation sources were removed from the embryo development solution and/or the recovery medium, the former treatment resulting in a significant benefit. After optimisation with cocoa genotype AMAZ 15, the same protocol was effective across all five additional cocoa genotypes tested. For the multiplication of clones, embryos regenerated following cryopreservation were used as explant sources, and vitrification was found to maintain their embryogenic potential.

  8. Effects of feed process variables on Hanford Vitrification Plant performance

    International Nuclear Information System (INIS)

    Farnsworth, R.K.; Peterson, M.E.; Wagner, R.N.

    1987-01-01

    As a result of nuclear defense activities, high-level liquid radioactive wastes have been generated at the Hanford Site for over 40 yr. The Hanford Waste Vitrification Plant (HWVP) is being proposed to immobilize these wastes in a waste form suitable for disposal in a geologic repository. Prior to vitrification, the waste will undergo several conditioning steps before being fed to the melter. The effect of certain process variables on the resultant waste slurry properties must be known to assure processability of the waste slurry during feed preparation. Of particular interest are the rheological properties, which include the yield stress and apparent viscosity. Identification of the rheological properties of the slurry is required to adequately design the process equipment used for feed preparation (agitators, mixing tanks, concentrators, etc.). Knowledge of the slurry rheological properties is also necessary to establish processing conditions and operational limits for maximum plant efficiency and reliability. A multivariable study was performed on simulated HWVP feed to identify the feed process variables that have a significant impact on rheology during processing. Two process variables were evaluated in this study: (a) the amount of formic acid added to the feed and (b) the degree of shear encountered by the feed during processing. The feed was physically and rheologically characterized at various stages during feed processing

  9. Subsidence above in situ vitrification: Evaluation for Hanford applications

    International Nuclear Information System (INIS)

    Dershowitz, W.S.; Plum, R.L.; Luey, J.

    1995-08-01

    Pacific Northwest Laboratory (PNL)is evaluating methods to extend the applicability of the in situ vitrification (ISV) process. One method being evaluated is the initiation of the ISV process in the soil subsurface rather than the traditional start from the surface. The subsurface initiation approach will permit extension of the ISV treatment depth beyond that currently demonstrated and allow selective treatment of contamination in a geologic formation. A potential issue associated with the initiation of the ISV process in the soil subsurface is the degree of subsidence and its effect on the ISV process. The reduction in soil porosity caused by the vitrification process will result in a volume decrease for the vitrified soils. Typical volume reduction observed for ISV melts initiated at the surface are on the order of 20% to 30% of the melt thickness. Movement of in-situ materials into the void space created during an ISV application in the soil subsurface could result in surface settlements that affect the ISV process and the processing equipment. Golder Associates, Inc., of Redmond, Washington investigated the potential for subsidence events during application of ISV in the soil subsurface. Prediction of soil subsidence above an ISV melt required the following analyses: the effect of porosity reduction during ISV, failure of fused materials surrounding the ISV melt, bulking of disturbed materials above the melt, and propagation of strains to the surface

  10. Corrosion assessment of refractory materials for high temperature waste vitrification

    International Nuclear Information System (INIS)

    Marra, J.C.; Congdon, J.W.; Kielpinski, A.L.

    1995-01-01

    A variety of vitrification technologies are being evaluated to immobilize radioactive and hazardous wastes following years of nuclear materials production throughout the Department of Energy (DOE) complex. The compositions and physical forms of these wastes are diverse ranging from inorganic sludges to organic liquids to heterogeneous debris. Melt and off-gas products can be very corrosive at the high temperatures required to melt many of these waste streams. Ensuring material durability is required to develop viable treatment processes. Corrosion testing of materials in some of the anticipated severe environments is an important aspect of the materials identification and selection process. Corrosion coupon tests on typical materials used in Joule heated melters were completed using glass compositions with high salt contents. The presence of chloride in the melts caused the most severe attack. In the metal alloys, oxidation was the predominant corrosion mechanism, while in the tested refractory material enhanced dissolution of the refractory into the glass was observed. Corrosion testing of numerous different refractory materials was performed in a plasma vitrification system using a surrogate heterogeneous debris waste. Extensive corrosion was observed in all tested materials

  11. Innovative fossil fuel fired vitrification technology for soil remediation

    International Nuclear Information System (INIS)

    1993-08-01

    Vortex has successfully completed Phase 1 of the ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation'' program with the Department of Energy (DOE) Morgantown Energy Technology Center (METC). The Combustion and Melting System (CMS) has processed 7000 pounds of material representative of contaminated soil that is found at DOE sites. The soil was spiked with Resource Conversation and Recovery Act (RCRA) metals surrogates, an organic contaminant, and a surrogate radionuclide. The samples taken during the tests confirmed that virtually all of the radionuclide was retained in the glass and that it did not leach to the environment. The organic contaminant, anthracene, was destroyed during the test with a Destruction and Removal Efficiency (DRE) of at least 99.99%. RCRA metal surrogates, that were in the vitrified product, were retained and will not leach to the environment--as confirmed by the TCLP testing. Semi-volatile RCRA metal surrogates were captured by the Air Pollution Control (APC) system, and data on the amount of metal oxide particulate and the chemical composition of the particulate were established for use in the Phase 2 APC system design. This topical report will present a summary of the activities conducted during Phase 1 of the ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation'' program. The report includes the detail technical data generated during the experimental program and the design and cost data for the preliminary Phase 2 plant

  12. Defense-waste vitrification studies during FY-1981. Summary report

    International Nuclear Information System (INIS)

    Bjorklund, W.J.

    1982-09-01

    Both simulated alkaline defense wastes and simulated acidic defense wastes (formed by treating alkaline waste with formic acid) were successfully vitrified in direct liquid-fed melter experiments. The vitrification process was improved while using the formate-treated waste. Leach resistance was essentially the same. Off-gas entrainment was the primary mechanism for material exiting the melter. When formate waste was vitrified, the flow behavior of the off gas from the melter changed dramatically from an erratic surging behavior to a more quiet, even flow. Hydrogen and CO were detectable while processing formate feed; however, levels exceeding the flamability limits in air were never approached. Two types of melter operation were tested during the year, one involving boost power. Several boosting methods located within the melter plenum were tested. When lid heating was being used, water spray cooling in the off gas was required. Countercurrent spray cooling was more effective than cocurrent spray cooling. Materials of construction for the off-gas system were examined. Inconel-690 is preferred in the plenum area. Inspection of the pilot-scale melter found that corrosion of the K-3 refractory and Inconel-690 electrodes was minimal. An overheating incident occurred with the LFCM in which glass temperatures up to 1480 0 C were experienced. Lab-scale vitrification tests to study mercury behavior were also completed this year. 53 figures, 63 tables

  13. High-level waste vitrification off-gas cleanup technology

    International Nuclear Information System (INIS)

    Hanson, M.S.

    1980-01-01

    This brief overview is intended to be a basis for discussion of needs and problems existing in the off-gas clean-up technology. A variety of types of waste form and processes are being developed in the United States and abroad. A description of many of the processes can be found in the Technical Alternative Documents (TAD). Concurrently, off-gas processing systems are being developed with most of the processes. An extensive review of methodology as well as decontamination factors can be found in the literature. Since it is generally agreed that the most advanced solidification process is vitrification, discussion here centers about the off-gas problems related to vitrification. With a number of waste soldification facilities around the world in operation, it can be shown that present technology can satisfy the present requirement for off-gas control. However, a number of areas within the technology base show potential for improvement. Fundamental as well as verification studies are needed to obtain the improvements

  14. Quality assurance program description: Hanford Waste Vitrification Plant, Part 1

    International Nuclear Information System (INIS)

    1992-01-01

    This document describes the Department of Energy's Richland Field Office (DOE-RL) quality assurance (QA) program for the processing of high-level waste as well as the Vitrification Project Quality Assurance Program for the design and construction of the Hanford Waste Vitrification Plant (HWVP). It also identifies and describes the planned activities that constitute the required quality assurance program for the HWVP. This program applies to the broad scope of quality-affecting activities associated with the overall HWVP Facility. Quality-affecting activities include designing, purchasing, fabricating, handling, shipping, storing, cleaning, erecting, installing, inspecting, testing, maintaining, repairing, and modifying. Also included are the development, qualification, and production of waste forms which may be safely used to dispose of high-level radioactive waste resulting from national defense activities. The HWVP QA program is made up of many constituent programs that are being implemented by the participating organizations. This Quality Assurance program description is intended to outline and define the scope and application of the major programs that make up the HWVP QA program. It provides a means by which the overall program can be managed and directed to achieve its objectives. Subsequent parts of this description will identify the program's objectives, its scope, application, and structure

  15. Dismantling and decontamination of Piver prototype vitrification plant

    International Nuclear Information System (INIS)

    Jouan, A.; Roudil, S.; Thomas, F.

    1991-01-01

    The PIVER prototype was targeted for dismantling in order to install a new pilot facility for the french continuous vitrification process. Most of the work involved the vitrification cell containing the process equipments, which had to be cleared out and thoroughly decontaminated; this implied disassembling, cutting up, conditioning and removing all the equipment installed in the cell. Remote manipulation, handling and cutting devices were used and some prior modifications were implemented in the cell environment. The dismantling procedure was conducted under a detailed programme defining the methodology for each operation. After equipment items and active zones were identified, the waste materials were removed, and several liquid decontamination operations were implemented. Removed activity, levels of irradiation in the cell and doses integrated by personnel were monitored to control progress and to adapt procedures to the conditions encountered. At the end of December 1989, the PIVER cleanup programme was at 87% complete and the total activity removed was 2.11 X 10 14 Bq (5712 Ci). The objective now is to obtain suitable working conditions in order to allow operators to enter the cell to remove items that are inaccessible or which cannot be dismantled by remote manipulators and to complete the decontamination procedure

  16. Vitrification of human ovarian tissue: effect of different solutions and procedures.

    Science.gov (United States)

    Amorim, Christiani Andrade; David, Anu; Van Langendonckt, Anne; Dolmans, Marie-Madeleine; Donnez, Jacques

    2011-03-01

    To test the effect of different vitrification solutions and procedures on the morphology of human preantral follicles. Pilot study. Gynecology research unit in a university hospital. Ovarian biopsies were obtained from nine women aged 22-35 years. Ovarian tissue fragments were subjected to [1] different vitrification solutions to test their toxicity or [2] different vitrification methods using plastic straws, medium droplets, or solid-surface vitrification before in vitro culture. Number of morphologically normal follicles after toxicity testing or vitrification with the different treatments determined by histologic analysis. In the toxicity tests, only VS3 showed similar results to fresh tissue before and after in vitro culture (fresh controls 1 and 2). In addition, this was the only solution able to completely vitrify. In all vitrification procedures, the percentage of normal follicles was lower than in controls. However, of the three protocols, the droplet method yielded a significantly higher proportion of normal follicles. Our experiments showed VS3 to have no deleterious effect on follicular morphology and to be able to completely vitrify, although vitrification procedures were found to affect human follicles. Nevertheless, the droplet method resulted in a higher percentage of morphologically normal follicles. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  17. Indirect Determination of Half-Lives of Short-Lived Fission Gases Using a Gas Flow Method; Determination Indirecte des Courtes PeRiodes de Produits de Fission Gazeux, par une Methode a Courant Gazeux; 041a 041e 0421 0412 0415 041d 041d 041e 0415 041e 041f 0420 0415 0414 0415 041b 0415 041d 0418 0415 041f 0415 0420 0418 041e 0414 041e 0412 041f 041e 041b 0423 0420 0410 0421 041f 0410 0414 0410 041a 041e 0420 041e 0422 041a 041e 0416 0418 0412 0423 0429 0418 0425 0413 0410 0417 041e - 041e 0411 0420 0410 0417 041d 042b 0425 041f 0420 041e 0414 0423 041a 0422 041e 0412 0414 0415 041b 0415 041d 0418 042f 0421 0418 0421 041f 041e 041b 042c 0417 041e 0412 0410 041d 0418 0415 041c 041c 0415 0422 041e 0414 041e 0412 0413 0410 0417 041e 0412 041e 0413 041e 041f 041e 0422 041e 041a 0410 ; Determinacion Indirecta del T 1/2 de los Cases de Fision de Periodo Corto por un Metodo de Circulacion

    Energy Technology Data Exchange (ETDEWEB)

    Patzelt, P.; Herrmann, G. [Institut fuer Anorganische Chemie und Kernchemie der Universitaet Mainz, Mainz, Federal Republic of Germany (Germany)

    1965-07-15

    ) [French] Etant donne que l'etude de la repartition des charges dans la fission nucleaire exige que l'un determine les rendements primaires en produits de fission qui, dans la plupart des cas, sont eux-memes des produits a courte periode ou proviennent de precurseurs a courte periode, il faut proceder a des separations tres rapides et efficaces de membres voisins d'une serie radioactive. Si l'on utilise le pouvoir d'emanation extremement eleve de certains composes de l'uranium, on separe le plus facilement les produits de fission gazeux dans plus d'une douzaine de series radioactives. Cependant, les calculs de rendement, de meme que le pouvoir d'emanation effectif des cibles en couches epaisses, peuvent etre sensiblement influences par les donnees relatives a la periode des gaz. C'est pourquoi on a determine avec une grande precision les periodes des isotopes du krypton et du xenon, de {sup 89}Kr a {sup 93}Kr et de {sup 131}Xe a {sup 143}Xe, par une methode a courant gazeux et un procede perfectionne avec electrode chargee. Les auteurs ont effectue des mesures par l'intermediaire des produits de desintegration a longue periode deposes sur les electrodes. Le debit, le temps d'irradiation, le temps de refroidissement et les dispositions relatives au comptage on ete choisis de maniere que les mesures des divers produits de filiation soient grandement facilitees. Dans certains cas, des separations radiochimiques se sont revelees indispensables pour des raisons de selectivite. Les resultats obtenus sont les suivants: {sup 89}Kr, 3.11 {+-} 0.06 min: {sup 90}Kr, 32.1 {+-} 0.8 s; {sup 91}Kr, 8.36 {+-} 0.15 s; {sup 92}Kr, 1,92 {+-} 0.07 s; {sup 93}Kr, 1.17 {+-} 0.04 s; {sup 137}Xe, 3.87 {+-} 0.15 min; {sup 138}Xe, 14.5 {+-} 0.5 min; {sup 139}Xe, 40.4 {+-} 1.3 s: {sup 140}Xe, 13.33 {+-} 0.27s; {sup 141}Xe, 1.70 {+-} 0.05s; {sup 142}Xe, 1.15 {+-} 0.04s- et {sup 143}Xe, 0.96 {+-} 0.02s. Les auteurs ont obtenu les periodes en extrapolant les courbes de desintegration beta ou de

  18. Vitrification of human germinal vesicle oocytes; before or after in vitro maturation?

    Directory of Open Access Journals (Sweden)

    Evangelia Kasapi

    2017-03-01

    Full Text Available Background The use of immature oocytes derived from stimulated cycles could be of great importance, particularly for urgent fertility preservation cases. The current study aimed to determine whether in vitro maturation (IVM was more successful before or after vitrification of these oocytes. Materials and Methods This prospective study was performed in a private in vitro fertilization (IVF center. We collected 318 germinal vesicle (GV oocytes from 104 stimulated oocyte donation cycles. Oocytes were divided into two groups according to whether vitrification was applied at the GV stage (group 1 or in vitro matured to the metaphase II (MII stage and then vitrified (group 2. In the control group (group 3, oocytes were in vitro matured without vitrification. In all three groups, we assessed survival rate after warming, maturation rate, and MII-spindle/chromosome configurations. The chi-square test was used to compare rates between the three groups. Statistical significance was defined at P<0.05 and we used Bonferroni criterion to assess statistical significance regarding the various pairs of groups. The Statistical Package for the Social Sciences version 17.0 was used to perform statistical analysis. Results There was no significant difference in the survival rate after vitrification and warming of GV (93.5% and MII oocytes (90.8%. A significantly higher maturation rate occurred when IVM was performed before vitrification (82.9% compared to after vitrification (51%. There was no significant difference in the incidence of normal spindle/ chromosome configurations among warmed oocytes matured in vitro before (50.0% or after (41.2% vitrification. However, a higher incidence of normal spindle/chromosome configurations existed in the in vitro matured oocytes which were not subjected to vitrification (fresh oocytes, 77.9%. Conclusion In stimulated cycles, vitrification of in vitro matured MII oocytes rather than GV oocytes seems to be more efficient. This

  19. Fast Plasma from a Coaxial Gun; Plasma Rapide Produit par un Canon Coaxial; Bystraya plazma iz koaksial'nogo inzhektora; Produccion de Plasma Rapido Mediante un Inyector Coaxial

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, J.; Henins, I. [Los Alamos Scientific Laboratory, Los Alamos, NM (United States)

    1966-04-15

    volume around the jet. Fast plasma is emitted in a narrow conical distribution with an open centre. The high voltage which accelerates the fast deuterohs also accelerates wall material ions if the fast plasma bombards a glass wall and evaporates it. (author) [French] Le canon coaxial utilise dans cette experience est une source de deux plasmas differents produits par des mecanismes separes. Un plasma de deuterium abondant et lent ( Tilde-Operator 10{sup 7} cm/s) est produit directement par l'interaction du type j xli ou j est le courant de plasma radial et if le champ magnetique produit par le courant d'alimentation le long de l'electrode centrale. La perturbation de courant se deplace, a travers le gaz injecte, vers l'ouverture du canon, a une vitesse d'environ 2,5 * 10{sup 7} cm/s et emmagasine de l'energie a l'arriere sous forme de champ magnetique et d'energie cinetique de plasma. Par son energie emmagasinee, le canon fonctionne comme un generateur electrique de basse impedence et de grande puissance de maniere a lancer dans le vide au-dela de l'ouverture du canon un jet de courant qui est la source de plasma rapide ( Tilde-Operator 5 x 10{sup 17} deuterons, Tilde-Operator 10{sup 8} cm/s). Le jet de courant ainsi que le plasma qu'il produit font l'objet des experiences decrites dans ce memoire. Le mecanisme de l'acceleration est complique et n'est pas parfaitement connu, mais beaucoup d'enseignements ont ete tires d'un grand nombre d'experiences dans lesquelles ont ete utilises les diagnostics suivants: boucles de captage diamagnetique externes, boucles Rogowsky sous vide, sondes electriques, electrode de captage capacitive externe, analyse de la deflection magnetique et electrostatique de particules, spectroscopic, photographie de la lumiere emise par les cibles, mesure de temps de vol avec ou sans champ de guidage, neutrons emis par le volume,du plasma par suite de la reaction d-d, etc. Il en resulte que le mecanisme d'acceleration consiste en un processus magneto

  20. L'année internationale des légumineuses n'était qu'un début | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    17 janv. 2017 ... Au cours des deux dernières décennies, les légumineuses, jadis peu cultivées, sont devenues un produit agricole clé au Canada : le pays est désormais le premier exportateur mondial de légumineuses, qui représentent la 5e culture la plus importante au Canada. Fort de son expertise, le Canada peut ...

  1. Project summary, 116-B-6-1 crib ISV [in situ vitrification] demonstration project

    International Nuclear Information System (INIS)

    Koegler, S.S.

    1989-01-01

    The 116-B Crib Demonstration Project is intended to demonstrate the emerging in situ vitrification (ISV) technology to immobilize or destroy hazardous and radioactive chemicals at an actual site. In situ vitrification is the conversion of contaminated soil into a durable glass and crystalline product through joule heating. The 116-B crib site was chosen for the demonstration because it contains both radioactive and hazardous chemicals (e.g., chromium) and presents a potential threat to environment. The project will involve sampling and analysis of the soil beneath the crib, a small-scale ISV test to verify operating parameters, vitrification of the crib, and analysis of the vitrified soil. 5 figs

  2. Process technology for vitrification of defense high-level waste at the Savannah River Plant

    International Nuclear Information System (INIS)

    Boersma, M.D.

    1984-01-01

    Vitrification in borosilicate glass is now the leading worldwide process for immobilizing high-level radioactive waste. Each vitrification project, however, has its unique mission and technical challenges. The Defense Waste Vitrification Facility (DWPF) now under construction at the Savannah River Plant will concentrate and vitrify a large amount of relatively low-power alkaline waste. Process research and development for the DWPF have produced significant advances in remote chemical operations, glass melting, off-gas treatment, slurry handling, decontamination, and welding. 6 references, 1 figure, 5 tables

  3. Alimentation animale et valeur nutritionnelle induite sur les produits dérivés consommés par l’homme : Les lipides sont-ils principalement concernés ?

    Directory of Open Access Journals (Sweden)

    Bourre Jean-Marie

    2003-09-01

    Full Text Available Dans quelle mesure la nourriture reçue par les animaux induit-elle une modification (amélioration ou au contraire dégradation de la valeur nutritionnelle des aliments qui en sont issus pour la nourriture de l’homme ? La réponse à cette question varie selon la nature des nutriments (vitamines, minéraux, acides gras poly-insaturés indispensables des graisses, acides aminés indispensables des protéines, et aussi de l’espèce considérée. Le problème est de rechercher l’impact réel des formulations des rations utilisées dans les élevages sur la valeur nutritionnelle des produits (viandes, lait et laitages, fromages et œufs, etc., et donc leur influence sur la santé du consommateur, évidemment dans un sens favorable. Les acides gras poly-insaturés oméga-3 (ω3 bénéficient de deux grands axes de valorisation. Le premier réside dans leur importance quantitative et leurs rôles dans le cadre de la mise en place et du maintien de divers organes, le cerveau au premier chef. Le second se trouve dans la prévention de diverses pathologies, les maladies cardio-vasculaires occupant une place prépondérante \\; avec, depuis peu, les maladies neuro-psychiatriques, stress, dépression et démence. Compte tenu des implications en termes de maladies, cardio-cérébro-vasculaires entre autres, le contrôle de la nature des acides gras constitutifs des graisses représente donc un enjeu considérable en ce qui concerne les viandes issues d’animaux terrestres, maritimes et aériens, du lait, des laitages, fromages et des œufs. Car la qualité des graisses données en nourriture animale détermine fondamentalement la valeur nutritionnelle des aliments qui en sont dérivés, pour la consommation humaine. Bien évidemment, il est relativement difficile de modifier la composition en acides gras des phospholipides constitutifs des membranes biologiques intégrées dans la multitude de types cellulaires, dont la spécificité est largement

  4. Statistics on the production and the use of the artificial radioelements in France; Statistiques sur la production et l'emploi des radioelements artificiels en France

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    The CEA is, in France, the unique producer of artificial radioelements for public uses. These products have been provided to the users since 1949. They include until now only radioelements formed in nuclear reactors. The following aspects of use in France of the artificial radioelements will be described: - Consumption of the artificial radioelements in France, - French production and import, - Teaching and study of applications. (M.B.) [French] Le Commissariat a l'Energie Atomique est, en Franoe, le seul producteur de radioelements artificiels pour l'utilisation publique. Ces produits ont ete fournis aux utilisateurs des 1949. Ils ne comprennent jusqu'a present que des radioelements formes dans des reacteurs nucleaires. Les aspects suivants de l'utilisation en France des radioelements artificiels seront decrits: onsommation des radioelements artificiels en France, Production francaise et importation, - Enseignement et etudes d'applications. (M.B.)

  5. ETUDES ANALYTIQUES : Détection des OGM : du libre choix des consommateurs aux études de biovigilance

    Directory of Open Access Journals (Sweden)

    Bertheau Yves

    2000-07-01

    Full Text Available Les récentes affaires de semences conventionnelles de colza et de maïs contaminées par des traces d’OGM ont à nouveau, s’il en était besoin, rappelé à notre bon souvenir les besoins en méthodes de détection et d’identification des OGM fiables et sensibles. Les développements se poursuivent, certes bien plus lentement qu’initialement espéré du fait du nombre important de facteurs à maîtriser et du caractère relativement inédit de ce travail. Concernant des matrices alimentaires variées, cette détection se heurte au manque de recul dans plusieurs domaines tels que celui de l’extraction et la purification d’acides nucléiques en quantité et en qualité. Bien que développées pour satisfaire aux besoins réglementaires européens concernant l’alimentation humaine, ces méthodes devraient être aisément applicables dans d’autres domaines concernés par les OGM (étude des transferts de gènes par flux pollinique, éventuels transferts horizontaux, suivi des acides nucléiques lors de l’ingestion.... Au-delà des OGM, les méthodes mises en œuvre devraient présenter un intérêt dans d’autres domaines comme la microbiologie, l’épidémiologie ou l’authentification des composants biologiques d’un produit.

  6. Corrosion of Metal Inclusions In Bulk Vitrification Waste Packages

    Energy Technology Data Exchange (ETDEWEB)

    Bacon, Diana H.; Pierce, Eric M.; Wellman, Dawn M.; Strachan, Denis M.; Josephson, Gary B.

    2006-07-31

    The primary purpose of the work reported here is to analyze the potential effect of the release of technetium (Tc) from metal inclusions in bulk vitrification waste packages once they are placed in the Integrated Disposal Facility (IDF). As part of the strategy for immobilizing waste from the underground tanks at Hanford, selected wastes will be immobilized using bulk vitrification. During analyses of the glass produced in engineering-scale tests, metal inclusions were found in the glass product. This report contains the results from experiments designed to quantify the corrosion rates of metal inclusions found in the glass product from AMEC Test ES-32B and simulations designed to compare the rate of Tc release from the metal inclusions to the release of Tc from glass produced with the bulk vitrification process. In the simulations, the Tc in the metal inclusions was assumed to be released congruently during metal corrosion as soluble TcO4-. The experimental results and modeling calculations show that the metal corrosion rate will, under all conceivable conditions at the IDF, be dominated by the presence of the passivating layer and corrosion products on the metal particles. As a result, the release of Tc from the metal particles at the surfaces of fractures in the glass releases at a rate similar to the Tc present as a soluble salt. The release of the remaining Tc in the metal is controlled by the dissolution of the glass matrix. To summarize, the release of 99Tc from the BV glass within precipitated Fe is directly proportional to the diameter of the Fe particles and to the amount of precipitated Fe. However, the main contribution to the Tc release from the iron particles is over the same time period as the release of the soluble Tc salt. For the base case used in this study (0.48 mass% of 0.5 mm diameter metal particles homogeneously distributed in the BV glass), the release of 99Tc from the metal is approximately the same as the release from 0.3 mass% soluble Tc

  7. Studies in Petroleum Composition the Distribution of Nitrogen Species, Metals and Coke Precursors During High Vacuum Distillation of Petroleum Étude de composition du pétrole Répartition des espèces azotées, des métaux et des précurseurs du coke pendant la distillation sous vide poussé du pétrole

    Directory of Open Access Journals (Sweden)

    Long R. B.

    2006-11-01

    Full Text Available Application of separation techniques to residua and other heavy feedstocks raises the issue of the most appropriate distillation cut-point for the maximum yield of useful (gas-oil type liquids. This publication addresses this specific issue and describes the influence of deepdistillation (to 1289°F+ on the composition and quality of the volatiles/nonvolatiles from a 950°F+ residuum. The techniques employed to estimate the composition/quality of the 950-1289°F and 1289°F+ fractions are deasphalting and clay-adsorption separation of each whole fraction. The data show that further distillation of the 950°F+ residuum can recover essentially all of the saturate content of the feed in the overhead product at 1289°F atmos. equiv. cut point. However, appreciable amounts of oxygen- and nitrogen-containing polar compounds are also taken overhead leading to a carbon residue value for the distillate of 8. 2 wt%. The metals and the coke precursors in the distillate lie mainly in the polar fraction along with the nitrogen compounds. However, at these high molecular weights the distillate also shows coke precursors in the saturate fraction and more extensively in the aromatic fraction. Distillation is an impurity (carbon precursors, heteroatoms, metals concentrating process. As the cut-point increases, the impurity content of the distillate increases but to a lesser extent than that of the corresponding residuum. L'application des techniques de séparation aux résidus et autres matières lourdes conduit à s'interroger sur le point de coupe de distillation adéquat qui va permettre d'obtenir le rendement maximum en liquides utiles (type gazole. Il faut reconnaître que la distillation est un processus de concentration des impuretés (produits de tête, hétéroatomes, métaux. Lorsque le point de coupe s'élève, le contenu en impuretés du distillat augmente, mais il augmente moins que celui du résidu correspondant. La présente publication

  8. Off-Gas Analysis During the Vitrification of Hanford Radioactive Waste Samples

    International Nuclear Information System (INIS)

    Ha, B.C.; Ferrara, D.M.; Crawford, C.L.; Choi, A.S.; Bibler, N.E.

    1998-01-01

    This paper describes the off-gas analysis of samples collected during the radioactive vitrification experiments. Production and characterization of the Hanford waste-containing LAW and HAW glasses are presented in related reports from this conference

  9. Vitrification testing of simulated high-level radioactive waste at Hanford

    International Nuclear Information System (INIS)

    Perez, J.M. Jr.; Nakaoka, R.R.

    1986-03-01

    The Hanford Waste Vitrification Plant may apply vitrification technology, being developed at Pacific Northwest Laboratory, to solidify selected Hanford waste streams prior to disposal in a federal repository. Based on the first stage of flowsheet development and laboratory testing, a reference working glass and two candidate simulated feed slurries were recommended for vitrification testing. Over 500 hours of melter testing were performed in 1985 during prototype vitrification experiments. Testing demonstrated that the slurry compositions had acceptable processing characteristics in a ceramic melter. A pre-made glass-former frit was determined to be preferred as the method of glass-former addition. Due to a high chromium content in the waste, spinal crystal formation and settling occurred in the glass tank. The nature and extent of off-gas effluents were consistent with past experiments processing slurries containing formic acid

  10. Embryos refrozen–thawed by vitrification lead to live births: Case report

    Directory of Open Access Journals (Sweden)

    Ana L. Mauri

    2011-03-01

    Conclusion: These case reports support the notion of safely repeating cryopreservation. However, despite these favorable results, there is still a need for prospective controlled studies on the obstetric and neonatal repercussions of refreezing and of vitrification in particular.

  11. High-level waste vitrification: the state of the art in France

    International Nuclear Information System (INIS)

    Sombret, C.; Maillet, J.

    1988-02-01

    This paper describes the main features of the French high-level waste vitrification program. These features include: - extensive R and D for more than 20 years; - successful operation of the AVM facility at Marcoule for about 10 years; - startup of six vitrification lines at La Hague, in the near future. The CEA is pursuing R and D for mid-term vitrification enhancement. New R and D facilities are being built at Marcoule to increase the capacity of vitrification equipment, study glass preparation at even higher temperatures to increase SiO 2 and Al 2 O 3 concentration, and perform extensive testing of samples with very high activity (more than 5,000Ci/l). 8 refs

  12. Nuclear Waste Vitrification in the U.S.: Recent Developments and Future Options

    International Nuclear Information System (INIS)

    Vienna, John D.

    2010-01-01

    Nuclear power plays a key role in maintaining current world wide energy growth while minimizing the greenhouse gas emissions. A disposition path for used nuclear fuel (UNF) must be found for this technology to achieve its promise. One likely option is the recycling of UNF and immobilization of the high-level waste (HLW) by vitrification. Vitrification is the technology of choice for immobilizing HLW from defense and commercial fuel reprocessing around the world. Recent advances in both recycling technology and vitrification show great promise in closing the nuclear fuel cycle in an efficient and economical fashion. This article summarizes the recent trends developments and future options in waste vitrification for both defense waste cleanup and closing the nuclear fuel cycle in the U.S.

  13. Decontamination of Surfaces by Ultrasonics; La decontamination des surfaces par l'emploi des ultra-sons

    Energy Technology Data Exchange (ETDEWEB)

    Cerre, P; Mestre, E; Kerdelleau, J de [Commissariat a l' Energie Atomique. Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1962-07-01

    A study was made of factors such as frequency, intensity, and time in the case of steel and of cotton cloth contaminated by fission products. Results show that the method is only of value in the case of steel and that it is necessary to operate at an optimum frequency of 80 khz and with an intensity of at least 4 W/cm{sup 2}. The difficulty of proposing a valid explanation for the decontamination mechanism is discussed. (authors) [French] Apres un examen des donnees theoriques du probleme, les auteurs font une etude systematique des facteurs frequence, intensite et temps dans le cas de l'acier et des tissus de coton contamines par des produits de fission. Ils montrent que la methode n'est interessante que pour l'acier qu'il faut operer a la frequence optimale de 80 kHz avec une intensite d'au moins 4 W/cm{sup 2}. Ils concluent en insistant sur la difficulte de proposer une explication valable pour le mecanisme de decontamination. (auteurs)

  14. Optimisation des proprietes fonctionnelles des alliages a memoire de forme suite a l'application de traitements thermomecaniques

    Science.gov (United States)

    Demers, Vincent

    L'objectif de ce projet est de determiner les conditions de laminage et la temperature de traitement thermique maximisant les proprietes fonctionnelles de l'alliage a memoire de forme Ti-Ni. Les specimens sont caracterises par des mesures de calorimetrie, de microscopie optique, de gene ration de contrainte, de deformation recuperable et des essais mecaniques. Pour un cycle unique, l'utilisation d'un taux d'ecrouissage e=1.5 obtenu avec l'application d'une force de tension FT = 0.1sigma y et d'une huile minerale resulte en un echantillon droit, sans microfissure et qui apres un recuit a 400°C, produit un materiau nanostructure manifestant des proprietes fonctionnelles deux fois plus grandes que le meme materiau ayant une structure polygonisee. Pour des cycles repetes, les memes conditions de laminage sont valables mais le niveau de deformation optimal est situe entre e=0.75-2, et depend particulierement du mode de sollicitation, du niveau de stabilisation et du nombre de cycles a la rupture requis par l'application.

  15. Vitrification of radioactive contaminated soil by means of microwave energy

    Science.gov (United States)

    Yuan, Xun; Qing, Qi; Zhang, Shuai; Lu, Xirui

    2017-03-01

    Simulated radioactive contaminated soil was successfully vitrified by microwave sintering technology and the solidified body were systematically studied by Raman, XRD and SEM-EDX. The Raman results show that the solidified body transformed to amorphous structure better at higher temperature (1200 °C). The XRD results show that the metamictization has been significantly enhanced by the prolonged holding time at 1200 °C by microwave sintering, while by conventional sintering technology other crystal diffraction peaks, besides of silica at 2θ = 27.830°, still exist after being treated at 1200 °C for much longer time. The SEM-EDX discloses the micro-morphology of the sample and the uniform distribution of Nd element. All the results show that microwave technology performs vitrification better than the conventional sintering method in solidifying radioactive contaminated soil.

  16. High level radioactive waste vitrification process equipment component testing

    International Nuclear Information System (INIS)

    Siemens, D.H.; Heath, W.O.; Larson, D.E.; Craig, S.N.; Berger, D.N.; Goles, R.W.

    1985-04-01

    Remote operability and maintainability of vitrification equipment were assessed under shielded-cell conditions. The equipment tested will be applied to immobilize high-level and transuranic liquid waste slurries that resulted from plutonium production for defense weapons. Equipment tested included: a turntable for handling waste canisters under the melter; a removable discharge cone in the melter overflow section; a thermocouple jumper that extends into a shielded cell; remote instrument and electrical connectors; remote, mechanical, and heat transfer aspects of the melter glass overflow section; a reamer to clean out plugged nozzles in the melter top; a closed circuit camera to view the melter interior; and a device to retrieve samples of the glass product. A test was also conducted to evaluate liquid metals for use in a liquid metal sealing system

  17. Treatment of heavy metal contaminated soils by in situ vitrification

    International Nuclear Information System (INIS)

    Hansen, J.E.

    1991-01-01

    Contaminated soil site remediation objectives call for the destruction, removal, and/or immobilization of contaminant species. Destruction is applicable to hazardous compounds (e.g., hazardous organics such as PCBs; hazardous inorganics such as cyanide); however, it is not applicable to hazardous elements such as the heavy metals. Removal and/or immobilization are typical objectives for heavy metal contaminants present in soil. Many technologies have been developed specifically to meet these needs. One such technology is In Situ Vitrification (ISV), an innovative mobile, onsite, in situ solids remediation technology that has been available on a commercial basis for about two years. ISV holds potential for the safe and permanent treatment/remediation of previously disposed or current process solids waste (e.g., soil, sludge, sediment, tailings) contaminated with hazardous chemical and/or radioactive materials. This paper focuses on the application of ISV to heavy metal-contaminated soils

  18. First use of in situ vitrification on radioactive wastes

    International Nuclear Information System (INIS)

    Bowlds, L.

    1992-01-01

    A high-temperature method for containing hazardous wastes, which was first developed in the 1980s, is being adapted for the in situ treatment of buried radioactive wastes by the US DOE's Idaho National Engineering Laboratory (INEL), following its recent report on successful preliminary tests. The method, called in situ vitrification (ISV), is an electrically induced thermal process that melts and fuses soil and wastes into a glass-like material at least as strong as natural obsidian or granite. Gases released during the process are captured and treated by an off-gas treatment system. After the wastes are vitrified, they could be left in place, or the mass could be broken up and transported to a disposal site. The glass-like substance would be chemically and physically similar to obsidian and from 4 to 10 times more durable than typical borosilicate glasses used to immobolize high-level nuclear wastes

  19. Characterization of vitrified soil produced by in situ vitrification

    International Nuclear Information System (INIS)

    Timmerman, C.L.; Lokken, R.O.

    1984-01-01

    Radioactive or other hazardous wastes buried at waste disposal sites may require further stabilization to secure the isolation of these wastes from the environment. One method of waste stabilization being developed is in situ vitrification. This process involves the in-place melting of buried wastes and the surrounding soil to produce a glass and crystalline waste form. Engineering-scale and pilot-scale demonstrations of this concept with soil contaminated with nonradioactive, hazardous species (Cs, Sr, Ru, Pb, Cd, etc.) were performed. These demonstrations provided information on species migration, crystalline-phase formation, and waste form durability. In addition to the nonradioactive tests, a crucible-scale melt of soil spiked with radioactive uranium, plutonium, and cesium was leach tested. The results show that hazardous waste components are retained in the product. The durability of the waste form in both the vitreous and the crystalline phases is similar to that of Pyrex glass

  20. Low-level radioactive waste vitrification: effect of Cs partitioning

    International Nuclear Information System (INIS)

    Horton, W.S.; Ougouag, A.M.

    1986-01-01

    The traditional Low-Level Radioactive Waste (LLW) immobilization options are cementation or bituminization. Either of these options could be followed by shallow-land burial (SLB) or above-ground disposal. These rather simple LLW procedures appeared to be readily available, to meet regulatory requirements, and to satisfy cost constraints. The authorization of State Compacts, the forced closure of half of the six SLB disposal facilities of the nation, and the escalation of transportation/disposal fees diminish the viability of these options. The synergetic combination of these factors led to a reassessment of traditional methods and to an investigation of other techniques. This paper analyzes the traditional LLW immobilization options, reviews the impact of the LLW stream composition on Low-Level Waste Vitrification (LLWV), then proposes and briefly discusses several techniques to control the volatile radionuclides in a Process Improved LLWV system (PILLWV)

  1. Pilot scale vitrification studies on hazardous and mixed wastes

    International Nuclear Information System (INIS)

    Bennert, D.M.; Overcamp, T.J.; Compton, K.L.; Sargent, T.N. Jr.; Resce, J.L.

    1993-01-01

    Over the past 30 years, the Department of Energy has committed extensive resources to the development of technologies suitable for the stabilization of high level radioactive waste. The objective of this work is to produce a vitreous wasteform capable of retaining the radioactive fractions in a leach resistant form. In an effort to further the development of technologies based within the DOE Complex, the DOE is making efforts to promote technical transfer initiatives that will bring these technologies to the private sector. To this end, the Department of Energy through the Savannah River Site is working with Clemson University's Environmental Systems Engineering Department to establish a laboratory dedicated to vitrification research. The laboratory is part of a cooperative effort between Westinghouse Savannah River Company, Clemson University, and their industrial partners EnVitCo, Inc., and Stir Melter, Inc

  2. Behavior of technetium in nuclear waste vitrification processes.

    Science.gov (United States)

    Pegg, Ian L

    Nearly 100 tests were performed with prototypical melters and off-gas system components to investigate the extents to which technetium is incorporated into the glass melt, partitioned to the off-gas stream, and captured by the off-gas treatment system components during waste vitrification. The tests employed several simulants, spiked with 99m Tc and Re (a potential surrogate), of the low activity waste separated from nuclear wastes in storage in the Hanford tanks, which is planned for immobilization in borosilicate glass. Single-pass technetium retention averaged about 35 % and increased significantly with recycle of the off-gas treatment fluids. The fraction escaping the recycle loop was very small.

  3. Characterization of vitrified soil produced by in-situ vitrification

    International Nuclear Information System (INIS)

    Timmerman, C.L.; Lokken, R.O.

    1983-01-01

    Radioactive or other hazardous wastes buried at waste-disposal sites may require further stabilization to secure the isolation of these wastes from the environment. One method of waste stabilization being developed is in-situ vitrification. This process involves the in-place melting of buried wastes and the surrounding soil to produce a glass and crystalline waste form. Engineering-scale and pilot-scale demonstrations of this concept with soil contaminated with nonradioactive, hazardous species (Cs, Sr, Ru, Pb, Cd, etc.) were performed. These demonstrations provided information on species migration, crystalline phase formation, and waste form durability. In addition to the nonradioactive tests, a crucible-scale melt of soil spiked with radioactive uranium, plutonium, and cesium was leach tested. The results show that hazardous waste components are retained in the product. The durability of the waste form in both the vitreous and crystalline phases is similar to that of pyrex glass

  4. In-situ vitrification: a status of the technology

    International Nuclear Information System (INIS)

    FitzPatrick, V.F.

    1986-09-01

    The In Situ Vitrification (ISV) process is a new technology developed from its conceptual phase to selected field-scale applications in the last 5 years. The US Department of Energy (DOE) has sponsored the ISV program to develop alternative technology for potential application to contaminated soil sites. The ISV process converts contaminated soils and wastes into a durable glass and crystalline waste form in place by melting using joule heating. The ISV process has been developed through a series of 25 engineering-scale (laboratory) tests, 10 pilot-scale (small field) tests, and four large-scale (full-scale field) tests. Its major advantages for stabilizing radioactive and hazardous wastes are found to be: safety in terms of minimizing worker and public exposure; long-term durability of waste form (more than 1 million years); cost effectiveness ($150 to $300/m 3 ); applicability to a wide variety of soils and inclusions; and potential for eliminating exhumation, transport, and handling

  5. Multipurpose optimization models for high level waste vitrification

    International Nuclear Information System (INIS)

    Hoza, M.

    1994-08-01

    Optimal Waste Loading (OWL) models have been developed as multipurpose tools for high-level waste studies for the Tank Waste Remediation Program at Hanford. Using nonlinear programming techniques, these models maximize the waste loading of the vitrified waste and optimize the glass formers composition such that the glass produced has the appropriate properties within the melter, and the resultant vitrified waste form meets the requirements for disposal. The OWL model can be used for a single waste stream or for blended streams. The models can determine optimal continuous blends or optimal discrete blends of a number of different wastes. The OWL models have been used to identify the most restrictive constraints, to evaluate prospective waste pretreatment methods, to formulate and evaluate blending strategies, and to determine the impacts of variability in the wastes. The OWL models will be used to aid in the design of frits and the maximize the waste in the glass for High-Level Waste (HLW) vitrification

  6. Hanford Waste Vitrification Plant - the project and process systems

    International Nuclear Information System (INIS)

    Swenson, L.D.; Miller, W.C.; Smith, R.A.

    1990-01-01

    The Hanford Waste Vitrification Plant (HWVP) project is scheduled to start construction on the Hanford reservation in southeastern Washington State in 1991. The project will immobilize the liquid high-level defense waste stored there. The HWVP represents the third phase of the U.S. Department of Energy (DOE) activities that are focused on the permanent disposal of high-level radioactive waste, building on the experience of Defense Waste Processing Facility (DWPF) at the Savannah River site, South Carolina, and of the West Valley Demonstration Plant (WVDP), New York. This sequential approach to disposal of the country's commercial and defense high-level radioactive waste allows HWVP to make extensive use of lessons learned from the experience of its predecessors, using mature designs from the earlier facilities to achieve economies in design and construction costs while enhancing operational effectiveness

  7. In situ vitrification program at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    Loehr, C.A.; Merrill, S.K.

    1991-01-01

    A program to demonstrate the viability of in situ vitrification (ISV) technology in remediating a buried mixed transuranic (TRU) waste site is under way at the Idaho National Engineering Laboratory (INEL). The application of the technology to buried waste is being evaluated as part of a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) feasibility study. The ISV thermal treatment process converts contaminated soil into a chemically inert and stable glass and crystalline product. The process uses joule heating, accomplished by applying electric potential to electrodes that are placed in the soil to initiate and maintain soil melting. Organic contaminants in the soil are destroyed or removed while inorganic contaminants, including radionuclides, are incorporated into the stable, glass-like product or volatilized. Off-gases are collected in a confinement hood over the melt area and processed through an off-gas treatment system. The paper illustrates and describes the ISV process

  8. Initial tests on in situ vitrification using electrode feeding techniques

    International Nuclear Information System (INIS)

    Farnsworth, R.K.; Oma, K.H.; Bigelow, C.E.

    1990-05-01

    This report summarizes the results of an engineering-scale in situ vitrification (ISV) test conducted to demonstrate the potential for electrode feeding in soils with a high concentration of metals. The engineering-scale test was part of a Pacific Northwest Laboratory (PNL) program to assist Idaho National Engineering Laboratory (INEL) in conducting treatability studies of the potential for applying ISV to the mixed transuranic waste buried at the INEL subsurface disposal area. The purpose of this test was to evaluate the effectiveness of both gravity fed and operator-controlled electrode feeding in reducing or eliminating many of the potential problems associated with fixed-electrode processing of soils with high concentrations of metal. Actual site soils from INEL were mixed with representative concentrations of carbon steel and stainless steel for this engineering-scale test. 18 refs., 14 figs., 3 tabs

  9. Vitrification of TRU wastes at Rocky Flats Plant

    International Nuclear Information System (INIS)

    Williams, P.M.; Johnson, A.J.; Ledford, J.A.

    1979-01-01

    Immobilization of incinerator ash and various noncombustible TRU wastes was investigated. In three different research projects borosilicate glass proved to be the best candidate for TRU waste fixation. This glass has excellent chemical durability, long-term stability in the presence of radiation, and will withstand continuous temperatures up to 400 0 C without devitrification. In addition, wastes prepared in the form of glass will attain densities of approximately 2500 kg/m 3 (2.5 g/cc). The free forming method of producing glass buttons provides a very simple, consistent, low maintenance way of producing a final waste form for transporting and either retrievable or permanent storage for TRU waste. The vitrification process produces a durable glass from the low density ash generated by the fluidized bed incinerator process and provides volume and weight reductions that are superior to other fixation processes. This results in decreased transportation and storage costs

  10. Am/Cm Vitrification Process: Pretreatment Material Balance Calculations

    International Nuclear Information System (INIS)

    Smith, F.G.

    2001-01-01

    This report documents material balance calculations for the pretreatment steps required to prepare the Americium/Curium solution currently stored in Tank 17.1 in the F-Canyon for vitrification. The material balance uses the latest analysis of the tank contents to provide a best estimate calculation of the expected plant operations during the pretreatment process. The material balance calculations primarily follow the material that directly leads to melter feed. Except for vapor products of the denitration reactions and treatment of supernate from precipitation and precipitate washing, the flowsheet does not include side streams such as acid washes of the empty tanks that would go directly to waste. The calculation also neglects tank heels. This report consolidates previously reported results, corrects some errors found in the spreadsheet and provides a more detailed discussion of the calculation basis

  11. Technical baseline description for in situ vitrification laboratory test equipment

    International Nuclear Information System (INIS)

    Beard, K.V.; Bonnenberg, R.W.; Watson, L.R.

    1991-09-01

    IN situ vitrification (ISV) has been identified as possible waste treatment technology. ISV was developed by Pacific Northwest Laboratory (PNL), Richland, Washington, as a thermal treatment process to treat contaminated soils in place. The process, which electrically melts and dissolves soils and associated inorganic materials, simultaneously destroys and/or removes organic contaminants while incorporating inorganic contaminants into a stable, glass-like residual product. This Technical Baseline Description has been prepared to provide high level descriptions of the design of the Laboratory Test model, including all design modifications and safety improvements made to data. Furthermore, the Technical Baseline Description provides a basic overview of the interface documents for configuration management, program management interfaces, safety, quality, and security requirements. 8 figs

  12. Hot cell design in the vitrification plant China

    International Nuclear Information System (INIS)

    Jiang Yubo; Wang Guangkai; Zhang Wei; Liang Runan; Dou Yuan

    2015-01-01

    In the area of reprocessing and radioactive waste management, gloveboxes and cells are a kind of non-standard equipments providing an isolated room to operate radioactive material inside, while the operator outside with essential biological shield and protection. The hot cell is a typical one, which could handle high radioactive material with various operating means and tight enclosure. The dissertation is based on Vitrification Plant China, a cooperation project between China and Germany. For the sino-western difference in design philosophy, it was presented how to draft an acceptable design proposal of applicable huge hot cells by analysing the design requirements, such as radioprotection, observation, illumination, remote handling, transportation, maintenance and decontamination. The construction feasibility of hot cells was also approved. Thanks to 3D software Autodesk Inventor, digital hot cell was built to integrate all the interfaces inside, which validated the design by checking the mechanical interference. (author)

  13. Remote maintenance demonstration tests at a pilot plant for high level waste vitrification

    International Nuclear Information System (INIS)

    Selig, M.

    1984-01-01

    The remote maintenance and replacement technique designed for a radioactive vitrification plant have been developed and tested in a full scale handling mockup and in an inactive pilot plants by the Central Engineering Department of the Karlsruhe Nuclear Research Center. As a result of the development work and the tests it has been proved that the remote maintenance technique and remote handling equipment can be used without any technical problems and are suited for application in a radioactive waste vitrification plant

  14. Processing constraints on high-level nuclear waste glasses for Hanford Waste Vitrification Plant

    International Nuclear Information System (INIS)

    Hrma, P.R.

    1993-09-01

    The work presented in this paper is a part of a major technology program supported by the U.S. Department of Energy (DOE) in preparation for the planned operation of the Hanford Waste Vitrification Plant (HWVP). Because composition of Hanford waste varies greatly, processability is a major concern for successful vitrification. This paper briefly surveys general aspects of waste glass processability and then discusses their ramifications for specific examples of Hanford waste streams

  15. The effect of vitrification on embryo development and subsequently postnatal health using a mouse model

    OpenAIRE

    Raja Khalif, Raja

    2016-01-01

    Animal models have shown that vitrification impairs ultrastructure and developmental potential of the oocyte, embryo survival rate, pregnancy rate and results in low birth weight of offspring but any long term effects on offspring are still unknown. In this study, embryos were vitrified at the 8-cell stage and kept in LN2. The first experiment investigated the effect of vitrification on numbers of surviving cells (comparing vitrified and non-vitrified embryos). The blastocysts developed from ...

  16. Effect of Vitrification on Sperm Parameters and Apoptosis in Fertile Men

    OpenAIRE

    M Adib; M Ramezani; MA Khalili

    2011-01-01

    Introduction & Objective: Today, cryopreservation of the human sperm is a common technique for treating infertility. It has been indicated that cryopreservation by different methods decrease the sperm motility and viability in fertile men, but still effect of freezing of the sperm by vitrification method have not been evaluated on sperm parameters and apoptosis. The aim of this study was to evaluate the effect of vitrification of sperm of fertile men on different sperm parameters (motility, m...

  17. Feasibility testing of in situ vitrification of uranium-contaminated soils

    International Nuclear Information System (INIS)

    Ikuse, H.; Tsuchino, S.; Tasaka, H.; Timmerman, C.L.

    1989-01-01

    Process feasibility studies using in situ vitrification (ISV) were successfully performed on two different uranium-contaminated wastes. In situ vitrification is a thermal treatment process that converts contaminated soils into durable glass and crystalline form. Of the two different wastes, one waste was uranium mill tailings, while the other was uranium-contaminated soils which had high water contents. Analyses of the data from the two tests are presented

  18. LFCM [liquid-fed ceramic melter] vitrification technology: Quarterly progress report, January--March 1987

    International Nuclear Information System (INIS)

    Brouns, R. A.; Allen, C. R.; Powell, J. A.

    1988-05-01

    This report is compiled by the Nuclear Waste Treatment Program and the Hanford Waste Vitrification Program at Pacific Northwest Laboratory to describe the progress in developing, testing, applying and documenting liquid-fed ceramic melter vitrification technology. Progress in the following technical subject areas during the second quarter of FY 1987 is discussed: melting process chemistry and glass development, feed preparation and transfer systems, melter systems, canister filling and handling systems, and process/product modeling. 23 refs., 14 figs., 10 tabs

  19. Overview of the West Valley Vitrification Facility transfer cart control system

    International Nuclear Information System (INIS)

    Bradley, E.C.; Rupple, F.R.

    1993-01-01

    Oak Ridge National Laboratory (ORNL) has designed the control system for the West Valley Demonstration Project Vitrification Facility transfer cart. The transfer cart will transfer canisters of vitrified high-level waste remotely within the Vitrification Facility. The control system will operate the cart under battery power by wireless control. The equipment includes cart mounted control electronics, battery charger, control pendants, engineer's console, and facility antennas

  20. In-situ vitrification: a large-scale prototype for immobilizing radioactively contaminated waste

    International Nuclear Information System (INIS)

    Carter, J.G.; Buelt, J.L.

    1986-03-01

    Pacific Northwest Laboratory is developing the technology of in situ vitrification, a thermal treatment process for immobilizing radioactively contaminated soil. A permanent remedial action, the process incorporates radionuclides into a glass and crystalline form. The transportable procss consists of an electrical power system to vitrify the soil, a hood to contain gaseous effluents, an off-gas treatment system and cooling system, and a process control station. Large-scale testing of the in situ vitrification process is currently underway

  1. The R7/T7 vitrification at La Hague: 10 years of operation

    International Nuclear Information System (INIS)

    Masson, H.; Desvaux, J.L.; Pluche, E.; Jouan, A.

    2001-01-01

    Vitrification of high level wastes from reprocessing of spent nuclear fuels has been carried out at La Hague on an industrial scale for ten years. This paper presents an historical overview of the facilities, and describes the facilities and their operations, startup performance, facility upgrading that has been done, and process control functions. The paper concludes that the technology for vitrification of high level wastes is mature and has been mastered. (author)

  2. Viability of zebrafish (Danio rerio) ovarian follicles after vitrification in a metal container.

    Science.gov (United States)

    Marques, Lis S; Bos-Mikich, Adriana; Godoy, Leandro C; Silva, Laura A; Maschio, Daniel; Zhang, Tiantian; Streit, Danilo P

    2015-12-01

    Cryopreservation of ovarian tissue has been studied for female germline preservation of farm animals and endangered mammalian species. However, there are relatively few reports on cryopreservation of fish ovarian tissue and especially using vitrification approach. Previous studies of our group has shown that the use of a metal container for the cryopreservation of bovine ovarian fragments results in good primordial and primary follicle morphological integrity after vitrification. The aim of this study was to assess the viability and in vitro development of zebrafish follicles after vitrification of fragmented or whole ovaries using the same metal container. In Experiment 1, we tested the follicular viability of five developmental stages following vitrification in four vitrification solutions using fluorescein diacetate and propidium iodide fluorescent probes. These results showed that the highest viability rates were obtained with immature follicles (Stage I) and VS1 (1.5 M methanol + 4.5 M propylene glycol). In Experiment 2, we used VS1 to vitrify different types of ovarian tissue (fragments or whole ovaries) in two different carriers (plastic cryotube or metal container). In this experiment, Stage I follicle survival was assessed following vitrification by vital staining after 24 h in vitro culture. Follicular morphology was analyzed by light microscopy after vitrification. Data showed that the immature follicles morphology was well preserved after cryopreservation. Follicular survival rate was higher (P < 0.05) in vitrified fragments, when compared to whole ovaries. There were no significant differences in follicular survival and growth when the two vitrification devices were compared. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. A pilot-scale radioactive test using in situ vitrification

    International Nuclear Information System (INIS)

    Timmerman, C.L.; Oma, K.M.

    1985-01-01

    Pacific Northwest Laboratory is developing in situ vitrification (ISV) as a potential remedial action technique for previously disposed radioactive liquid drain sites. The process melts the contaminated soil to produce a durable glass and crystalline waste form and encapsulates the radionuclides. The development of this alternative technology is being performed for the US Department of Energy. The results of an ISV pilot-scale test conducted in June 1983 are discussed in which soils contaminated with actual radioactive transuranic and mixed fission product elements were vitrified. The test successfully demonstrated the containment of radionuclides during processing, both within the vitrified mass and in the off-gas system. No environmental release of radioactive material was detectable during testing operations. The vitrified soil retained >99% of all radionuclides. Losses to the offgas system varied from less than or equal to 0.03% for particulate materials (plutonium and strontium) to 0.8% for cesium, which is a more volatile element. The off-gas system effectively contained both volatile and entrained radioactive materials. Analysis of the vitrified soil revealed that all radionuclides were distributed throughout the vitrified zone, some more uniformly than others. Analysis of soil samples taken adjacent to the block indicated that no migration of radionuclides outside the vitrification zone occurred. Leaching studies have shown that the ISV process generates a highly durable waste form, comparable to Pyrex and granite. Based on geologic data from the hydration of obsidian, which is chemically similar to the ISV glass, the hydration or weathering rate is predicted to be much less than 1 mm in 10,000 yr

  4. Cold cap subsidence for in situ vitrification and electrodes therefor

    Science.gov (United States)

    Buelt, James L.; Carter, John G.; Eschbach, Eugene A.; FitzPatrick, Vincent F.; Koehmstedt, Paul L.; Morgan, William C.; Oma, Kenton H.; Timmerman, Craig L.

    1992-01-01

    An electrode for use in in situ vitrification of soil comprises a molybdenum rod received within a conductive sleeve or collar formed of graphite. Electrodes of this type are placed on either side of a region containing buried waste material and an electric current is passed therebetween for vitrifying the soil between the electrodes. The graphite collar enhances the thermal conductivity of the electrode, bringing heat to the surface, and preventing the formation of a cold cap of material above the ground surface. The annulus between the molybdenum rod electrode and the graphite collar is filled with a conductive ceramic powder of a type that sinters upon the molybdenum rod, protecting the same from oxidation as the graphite material is consumed, or a metal powder which liquifies at operating temperatures. The molybdenum rod in the former case may be coated with an oxidation protectant, e.g. of molybdenum disilicide. As insulative blanket is suitably placed on the surface of the soil during processing to promote subsidence by allowing off-gassing and reducing surface heat loss. In other embodiments, connection to vitrification electrodes is provided below ground level to avoid loss of connection due to electrodes deterioration, or a sacrificial electrode may be employed when operation is started. Outboard electrodes can be utilized to square up the vitrified area. Further, the center of the molybdenum rod can be made hollow and filled with a powdered metal, such as copper, which liquifies at operating temperatures. In one embodiment, the molybdenum rod and the graphite collar are physically joined at the bottom.

  5. In situ vitrification pilot-scale radioactive test

    International Nuclear Information System (INIS)

    Timmerman, C.L.; Oma, K.H.

    1984-10-01

    Pacific Northwest Laboratory (PNL) is developing in situ vitrification (ISV) as an in-place stabilization technique for selected liquid radioactive waste disposal sites. The process melts the wastes and surrounding soil to produce a durable glass and crystalline waste form. These ISV process development testing and evaluation studies are being conducted for the US Department of Energy. The results of an ISV pilot-scale test conducted in June of 1983 in which soils contaminated with actual radioactive transuranic and mixed fission product elements were vitrified are discussed. The primary objectives of the radioactive test were to: demonstrate containment and confinement of the radioactive material; verify equipment performance of the power and off-gas systems; identify losses to the off-gas system; and characterize the behavior of the radioactive material in the vitrified soil. The test successfully demonstrated the processing containment of radionuclides both within the vitrified mass and in the off-gas system. No environmental release of radioactive material was measured during testing operations. The vitrified soil had a greater than 99% retention of all radionuclides. Losses to the off-gas system varied from less than or equal to 0.03% for particulate materials (plutonium and strontium) to 0.8% for cesium which is a more volatile element. The off-gas system effectively contained both volatile and entrained radioactive materials. Analysis of the vitrified soil revealed that all radionuclides were distributed throughout the vitrified zone, some more uniformly than others. No migration of radionuclides outside the vitrification zone occurred, as indicated by analysis of soil samples from around the block. Previous waste form leaching studies indicate an acceptable durability of the ISV product. 8 references, 34 figures, 8 tables

  6. In situ vitrification pilot-scale radioactive test

    Energy Technology Data Exchange (ETDEWEB)

    Timmerman, C.L.; Oma, K.H.

    1984-10-01

    Pacific Northwest Laboratory (PNL) is developing in situ vitrification (ISV) as an in-place stabilization technique for selected liquid radioactive waste disposal sites. The process melts the wastes and surrounding soil to produce a durable glass and crystalline waste form. These ISV process development testing and evaluation studies are being conducted for the US Department of Energy. The results of an ISV pilot-scale test conducted in June of 1983 in which soils contaminated with actual radioactive transuranic and mixed fission product elements were vitrified are discussed. The primary objectives of the radioactive test were to: demonstrate containment and confinement of the radioactive material; verify equipment performance of the power and off-gas systems; identify losses to the off-gas system; and characterize the behavior of the radioactive material in the vitrified soil. The test successfully demonstrated the processing containment of radionuclides both within the vitrified mass and in the off-gas system. No environmental release of radioactive material was measured during testing operations. The vitrified soil had a greater than 99% retention of all radionuclides. Losses to the off-gas system varied from less than or equal to 0.03% for particulate materials (plutonium and strontium) to 0.8% for cesium which is a more volatile element. The off-gas system effectively contained both volatile and entrained radioactive materials. Analysis of the vitrified soil revealed that all radionuclides were distributed throughout the vitrified zone, some more uniformly than others. No migration of radionuclides outside the vitrification zone occurred, as indicated by analysis of soil samples from around the block. Previous waste form leaching studies indicate an acceptable durability of the ISV product. 8 references, 34 figures, 8 tables.

  7. Oil sludge treatment using thermal and ash vitrification technology

    International Nuclear Information System (INIS)

    Rohyiza Baan; Sharifah Aishah, S.A.K.; Mohamad Puad Abu; Mohd Abdul Wahab Yusof

    2010-01-01

    In this paper, an experimental study of crude oil sludge terminal for volume reduction and radionuclide stability was treated by using integrated thermal treatment system. The pre-thermal treatment of oil sludge was carried out in fluidized bed combustor at temperature 500 degree Celsius, and then the ash produced from that process was vitrified in high temperature furnace at temperature above 1000 degree Celsius. The main contents of oil sludge are composed of 80% carbon, 11% sulphur, 50% volatile matter and 30% ash. The high heating value was 35,722 kJ/ kg. Analysis by gamma spectrometer was showed the radionuclide as Ra-226 (52.23 Bq/ kg), Ra-228 (47.48 Bq/ kg), K-40 (172.55 Bq/ kg), whereas analysis by neutron activation analysis (NAA) for U (0.5 μg/ g) and Th (0.5 μg/ g) was present in low concentration. Trace elements as Ba, Cd, Cr, Hg, As, Pb, Al, Zn, Ni was determine by using ICPMS. Thermal analysis has shown loss of mass and residual decomposition in the TG and DTA curves. The concentration of radionuclide in ash from fluidized bed combustor process was increased for Ra-226 (264.27 Bq/ kg) and Ra-228 (253.77 Bq/ kg). The slag was produced from ash vitrification process was characterized by X-ray fluorescence (XRF) and showed that silica oxide and potassium oxide were found. The slag characterization by X-ray diffraction (XRD) showed that slag composed of crystalline. The toxicity characteristic leaching procedure (TCLP) test showed that the slag resulted in very low leachability of heavy metals. Most of the toxic metals are fixed in the vitrification process and the leachate values meet the standard level of Malaysian Department of Environmental (DOE) of hazardous materials. The average concentration of each element varied between 1.5-14.0 mg/ kg. (author)

  8. In situ vitrification large-scale operational acceptance test analysis

    International Nuclear Information System (INIS)

    Buelt, J.L.; Carter, J.G.

    1986-05-01

    A thermal treatment process is currently under study to provide possible enhancement of in-place stabilization of transuranic and chemically contaminated soil sites. The process is known as in situ vitrification (ISV). In situ vitrification is a remedial action process that destroys solid and liquid organic contaminants and incorporates radionuclides into a glass-like material that renders contaminants substantially less mobile and less likely to impact the environment. A large-scale operational acceptance test (LSOAT) was recently completed in which more than 180 t of vitrified soil were produced in each of three adjacent settings. The LSOAT demonstrated that the process conforms to the functional design criteria necessary for the large-scale radioactive test (LSRT) to be conducted following verification of the performance capabilities of the process. The energy requirements and vitrified block size, shape, and mass are sufficiently equivalent to those predicted by the ISV mathematical model to confirm its usefulness as a predictive tool. The LSOAT demonstrated an electrode replacement technique, which can be used if an electrode fails, and techniques have been identified to minimize air oxidation, thereby extending electrode life. A statistical analysis was employed during the LSOAT to identify graphite collars and an insulative surface as successful cold cap subsidence techniques. The LSOAT also showed that even under worst-case conditions, the off-gas system exceeds the flow requirements necessary to maintain a negative pressure on the hood covering the area being vitrified. The retention of simulated radionuclides and chemicals in the soil and off-gas system exceeds requirements so that projected emissions are one to two orders of magnitude below the maximum permissible concentrations of contaminants at the stack

  9. In-situ vitrification of radioactively contaminated soils: summary paper

    International Nuclear Information System (INIS)

    Buelt, J.L.; Fitzpatrick, V.F.

    1987-01-01

    The in-situ vitrification (ISV) process is a new technology that has been developed from its conceptual phase through selected field-scale application tests during the last six years. In situ vitrification converts contaminated soils and waste inclusions into a durable glass and crystalline waste form by in-place melting. Electrodes are inserted into the soil to be treated and an electrical current is passed through the soil to be treated and an electrical current is passed through the soil to melt it. After cooling, the process fixes (TRU) and fission product radionuclides making them relatively nonleachable, resistant to intrusion, and nondispersible when intentionally disturbed. Another application considered for isolation of radioactively contaminated soils, but not yet developed, is the generation of impermeable barrier walls to prevent ground water seepage into a site. The barrier technique could also be used over the surface of an existing disposal site to deter plant and animal intrusion. The development units have been extensively tested with many types of soils and waste inclusions such as concrete, buried metals, sealed containers, organic chemicals with high boiling points such as polychlorinated biphenyls, and inorganic chemicals, including toxic heavy metals, nitrates, and sulfates. Nitrates and organics are destroyed, while heavy metals and fluorides are retained to a high percentage within the molten soil during processing. At $200 to $300/m 3 for radioactive waste, the process is economically competitive with many alternative remediation processes. The ISV process has been developed to the point where it is ready for large-scale field testing at an actual TRU-contaminated soil site. 5 references, 2 figures, 2 tables

  10. Fission-Fragment Angular, Energy, and Mass Division Correlations for the U{sup 234} (d, Pf) Reaction; Correlation des Angles, des energies et des Masses pour les Fragments de Fission Produits par la Reaction {sup 234}U(d, pf); K 041e 0420 0420 0415 041b 042f 0426 0418 042f 041c 0415 0416 0414 0423 0420 0410 0421 041f 0420 0415 0414 0415 041b 0415 041d 0418 0415 041c 041e 0421 K 041e 041b K 041e 0412 0414 0415 041b 0415 041d 0418 042f 041f 041e 0423 0413 041b 0423 , 041f 041e 042d 041d 0415 0420 0413 0418 0418 0418 041f 041e 041c 0410 0421 0421 0415 0412 0420 0415 0417 0423 041b 042c 0422 0410 0422 0415 0420 0415 0410 K 0426 0418 0419 (d, pf) 0423 0420 0410 041d 0410 -234; Correlaciones Entre la Distribucion Angular, la Energia y la Division Masica de los Fragmentos en la Reaccion {sup 234}U (d, pf)

    Energy Technology Data Exchange (ETDEWEB)

    Vandenbosch, R. [University of Washington, Seattle, WA (United States); Unik, J. P.; Huizenga, J. R. [Argonne National Laboratory, Argonne, IL (United States)

    1965-07-15

    'un analyseur a trois parametres ils ont enregistre simultanement les energies cinetiques des deux fragments de fission et l'energie du proton pour chaque coincidence. L'energie d'excitation pour laquelle la fission se produit est definie par l'energie cinetique du proton libere. Les variations de l'anisotropie angulaire Selon l'energie d'excitation ont une structure beaucoup plus nette que celle que Lamphere a obtenue pour le meme moyau, en bombardant {sup 234}U par des neutrons rapides. Les auteurs ont observe au moins huit voies de fission au point d'etranglement dans la region des energies comprises entre le seuil et 2 MeV au-dessus du seuil. Ils ont calcule (calculs de type Nilsson) des energies de particules isolees pour des noyaux deformes dans le cas de deformations plus grandes qui dorment une description pius precise de la configuration au point d'etranglement. Les etats d'une particule isolee identifies par Lamphere sont en accord avec ceux dont on a trouve par le calcul qu'ils sont voisins de la surface de Fermi pour des deformations raisonnables au point d'etranglement. Ces experiences avaient primitivement pour but de rechercher s'il n'y avait pas une correlation entre l'asymetrie de masse et l'anisotropie angulaire. Les rendements Selon la masse obtenus a partir des energies de fragments en correlation ne font apparaitre aucune variation de l'anisotropie Selon le rapport des masses, contrairement a ce que se passe dans les experiences ou l'on ne fixe pas l'energie d'excitation a laquelle la fission a lieu (experiences ou l'on observe effectivement une variation de l'anisotropie Selon le rapport des masses). On ne saurait donc affirmer, d'apres les mesures de l'anisotropie, que les proprietes du point d'etranglement influencent la repartition finale des masses. La moyenne de l'energie cinetique totale liberee au cours de la fission varie dans une proportion inferieure a 0,5% pour les differentes voies a l'etranglement observees. Les auteurs ont aussi etudie la

  11. Contribution à l'inventaire et à la domestication des espèces ...

    African Journals Online (AJOL)

    SARAH

    30 juin 2014 ... de nombreuses espèces végétales ont disparu ou se sont raréfiées, essentiellement ..... Tableau 4 : Durée de séjour en pépinière des essences en fonction du matériel végétal utilisé. Durée de séjour. Durée courte (3-6 ... conscience sur l'importance socioéconomique de ces produits et les désagréments ...

  12. Conceptual design for vitrification of HLW at West Valley using a rotary calciner/metallic melter

    International Nuclear Information System (INIS)

    Giraud, J.P.; Conord, J.P.; Saverot, P.M.

    1984-01-01

    The CEA has had an extensive research program in the field of vitrification technology for over 24 years, and several testing facilities were used throughout all phases of development and engineering: The Vulcain facility comprises a vitrification hot cell and four auxiliary hot cells. Vulcain allows the production of 2-kg samples of active glass. The off-gas treatment system allows testing the DF of each equipment. The auxiliary cells are equipped with leach-rate tests, diffusion tests, and irradiation tests on the glass samples. The Atlas facility is a reproduction of AVM calcination and vitrification furnaces at 1/2 scale enclosed in a glove box. This facility is used for testing ruthenium volatility and containment in the vitrification process. The full-scale AVM inactive pilot facility is used for testing calcination and vitrification of new compositions of high-level waste and for developing new types of vitrification furnaces. The inactive test loop is for testing air cooling of glass containers. The full-scale AVH inactive pilot facility is used for testing AVH technology and has been in operation since late 1981

  13. In Vitro Maturation and Embryo Development to blastocyst Mouse Germinal Vesicle Oocytes after Vitrification

    Directory of Open Access Journals (Sweden)

    M Nikseresht

    2013-05-01

    Full Text Available Abstract Background & aim: Vitrification is a simple and ultra rapid technique for the conservation of fertility. Improving pregnancy rate associate with the use of cryopreserved oocytes would be an important advanced in human assisted reproductive technology (ART. The purpose of this study was to evaluate survival, oocytes maturation and embryo development to the blastocyst stage after vitrification of oocytes germinal vesicle-stage and multi stage Methods: In the present experimental study, germinal vesicle oocytes with or without cumulus cells were transferred to vitrification solution containing 30% (v/v ethylene glycol, 18% (w/v Ficoll-70, and 0.3 M sucrose, either by single step or in a step-wise way. After vitrification and storage in liquid nitrogen, the oocytes were thawed and washed twice in culture medium TCM119, and then subjected to in vitro maturation, fertilization, and culture. Data analysis was performed by using One-way variance and Tukey tests. Results: Oocytes survival, metaphase 2 stage oocyte maturation, fertilization and embryo formed blastocyst in vitrification methods multistage were significantly higher than the single step procedure (P<0/05 Conclusion: The Germinal vesicle stage oocytes vitrified with cumulus cells and stepwise procedure had positive effect on the survival, maturation and developmental rate on blastocyst compared to oocytes without cumulus cell and single step procedure. Key words: Germinal Vesicle Oocyte, Blastocyst, Vitrification, Ethylene glycol

  14. Good Preservation of Stromal Cells and No Apoptosis in Human Ovarian Tissue after Vitrification

    Directory of Open Access Journals (Sweden)

    Raffaella Fabbri

    2014-01-01

    Full Text Available The aim of this study was to develop a vitrification procedure for human ovarian tissue cryopreservation in order to better preserve the ovarian tissue. Large size samples of ovarian tissue retrieved from 15 female-to-male transgender subjects (18–38 years were vitrified using two solutions (containing propylene glycol, ethylene glycol, and sucrose at different concentrations in an open system. Light microscopy, transmission electron microscopy, and TUNEL assay were applied to evaluate the efficiency of the vitrification protocol. After vitrification/warming, light microscopy showed oocyte nucleus with slightly thickened chromatin and irregular shape, while granulosa and stromal cells appeared well preserved. Transmission electron microscopy showed oocytes with slightly irregular nuclear shape and finely dispersed chromatin. Clear vacuoles and alterations in cellular organelles were seen in the oocyte cytoplasm. Stromal cells had a moderately dispersed chromatin and homogeneous cytoplasm with slight vacuolization. TUNEL assay revealed the lack of apoptosis induction by vitrification in all ovarian cell types. In conclusion after vitrification/warming the stromal compartment maintained morphological and ultrastructural features similar to fresh tissue, while the oocyte cytoplasm was slightly damaged. Although these data are encouraging, further studies are necessary and essential to optimize vitrification procedure.

  15. Hanford Waste Vitrification Plant Quality Assurance Program description for high-level waste form development and qualification

    International Nuclear Information System (INIS)

    1993-08-01

    The Hanford Waste Vitrification Plant Project has been established to convert the high-level radioactive waste associated with nuclear defense production at the Hanford Site into a waste form suitable for disposal in a deep geologic repository. The Hanford Waste Vitrification Plant will mix processed radioactive waste with borosilicate material, then heat the mixture to its melting point (vitrification) to forin a glass-like substance that traps the radionuclides in the glass matrix upon cooling. The Hanford Waste Vitrification Plant Quality Assurance Program has been established to support the mission of the Hanford Waste Vitrification Plant. This Quality Assurance Program Description has been written to document the Hanford Waste Vitrification Plant Quality Assurance Program

  16. De nouveaux procédés d’extraction des huiles pour des produits finis de haute qualité

    Directory of Open Access Journals (Sweden)

    Parmentier Michel

    2004-11-01

    Full Text Available New concerns have appeared recently from the European and American consumers about quality, safety and environmental impact of the food products. In the particular case of European countries, the coming back of traditional products with a high sentimental value should be noticed. To fit the forthcoming demand of the consumer, the Oils and Fats industry have to develop a new approach based on alternative technologies that may emerge from the research with very specific objectives: no solvents, mild technologies, less energy consumption and final wastes. The purpose of this article is to discuss about the new biological tools capable to generate alternative ways for the oil elaboration: use of enzymes for destructuration of the vegetal or animal tissues and the subsequent utilisation of membrane techniques for the separation and purification steps. These new technologies involving less heat and mechanical stress to the oil, lead to a better “native” quality of the final products. However, fundamental research is needed on the separation mechanisms of those complex mixtures to optimise the process and prepare the transfer to the industrial conditions. The present article reports a contribution on the aqueous extraction of rapeseed oil as an example

  17. Etude structurale et propriétés des verres peralumineux de conditionnement des produits de fission et actinides mineurs"

    OpenAIRE

    Gasnier , Estelle

    2013-01-01

    In this work, peraluminous glasses (lack of alkaline and alkaline earth ions regarding aluminum) are under study to assess the potentiality of these matrices to confine fission products and minor actinides (FPA) at higher rate than current R7T7 glass (18,5 wt % FPA). The first part of this work aims at studying the physical and chemical properties of complex peraluminous glasses containing increasing FPA rate (18.5 to 32 wt %) to compare them with the specifications. The very low crystallizat...

  18. La gestion des stocks de produits périssables et l’utilisation des intégrateurs temps - température

    OpenAIRE

    Kouki , Chaaben

    2010-01-01

    One of the implicit assumptions made in research related to inventory control is to keep products indefinitely in inventory to meet future demand. However, such an assumption is not true for a large wide of products characterized by a limited lifetime. The economic impact of managing such products led to substantial work in perishable inventory control literature. Investigations developed so far underline the complexity of modeling perishable inventory. Moreover, the dependency of the lifetim...

  19. Time extrapolation of radiolytic degradation product kinetics: the case of polyurethane; Extrapolation dans le temps des cinetiques de production des produits de degradation radiolytique: application a un polyurethane

    Energy Technology Data Exchange (ETDEWEB)

    Dannoux, A

    2007-02-15

    The prediction of the environmental impact of organic materials in nuclear waste geological storage needs knowledge of radiolytic degradation mechanisms and kinetics in aerobic and anaerobic conditions. In this framework, the effect of high doses (> MGy) and the variation of dose rate have to be considered. The material studied is a polyurethane composed of polyether soft segment and aromatic hard segments. Mechanisms were built on the analysis of material submitted to irradiations of simulation (high energy electrons and gamma radiation) by FTIR spectroscopy and gaseous and liquid degradation products by gas mass spectrometry and size exclusion chromatography. The electron paramagnetic resonance study of radical process and the determination of oxygen consumption and gas formation radiolytic yields allowed us to acquire kinetic data and to estimate dose rate and high doses effects. The polyurethane radio-oxidation mainly concerns soft segments and induced cross-linkings and production by scissions of oxidised compounds (esters, alcohols, carboxylic acids). The kinetic of radical termination is rapid and the dose rate effect is limited. After 10 MGy, branching and scission reactions are in equilibrium and low molecular weight products accumulate. At last, the degradation products release in water is influenced by the oxidation rate and the temperature. After 10 MGy, the soluble fraction is stabilised at 25%. The water soluble products identified by electro-spray ionisation mass spectrometry (alcohols, aldehydes, carboxylic acids) potentially formed complexes with radionuclides. (author)

  20. Un produit emblématique à la dérive des continents et des consommateurs : l’huile d’olive

    Directory of Open Access Journals (Sweden)

    Palma Giulia

    2012-09-01

    Full Text Available Mediterranean countries, in particular Spain, Italy and Tunisia, rule the international market of olive oil, in terms of land, production and exports. However, several new countries, such as Argentina, Chile, the United States and Australia have entered the market and are becoming important actors: their production, as well as imports of olive oil, are growing fast. Thanks to the positive image that it acquired due to its health benefits, olive oil is more and more appreciated in countries where its consumption is recent and non traditional. On the contrary, in Mediterranean countries, namely in Tunisia, other vegetable oils and fats tend to substitute olive oil, which is more expensive. However, such oils and fats could be responsible for the increase of cardiovascular diseases and obesity.