WorldWideScience

Sample records for virtual try-on clothing

  1. Lifestyle and Women’s Clothing in Tehran

    Directory of Open Access Journals (Sweden)

    Nafiseh Hamidi

    2008-04-01

    Full Text Available This article aims at finding different lifestyles of female clothing in Tehran. To this end, it describes women’s diverse types of clothing in different social and cultural environments. The main questions advanced in the article are about special lifestyles and logic of choosing clothes by women. The authors try to discover whether distinction, identity making or some kinds of primary functions such as protection, decoration, and chastity are considered the most important factors for women. To find answers, the authors conducted deep interviews with 40 female residents of Tehran and extracted their social positions and lifestyle in clothing. Based on these findings, the authors could distinguish nine different social types.

  2. The study for decontamination techniques of adhered high contamination on protective clothing

    Energy Technology Data Exchange (ETDEWEB)

    Park, Dong Won; Kim, Byung Rae; Kim, Seung Jae [Korea Inspection Co., ltd., Kimhae (Korea, Republic of)

    2013-04-15

    Nuclear power plant worker who work at Radiation access control area should be take the protective clothing that basically maintained in accordance with the provisions of under 40KBq / m{sup 3} to prevent contamination of the worker. However, the highly contaminated work clothes that occurs after each planned preventive maintenance of nuclear power plants reaches too many quantities even if not only through the process of re-washing several times and but also through the process of decay. This lead to the increase of radioactive waste and there is also concern dose exposure due to the dose that occurs in the process of storage for radioactive decay. So research of fixation contaminated protective clothing decontamination technology seems to contribute significantly reduction of radioactive waste depend on the reuse of highly contaminated protective clothing that ensured soundness. High-contamination protective clothing are generated by planned preventive maintenance of each nuclear power plant. Despite repeated re-laundry, radioactive contamination can not be removed, must be selected a disposal. These, thought to be impossible virtually decontamination for a long time but through the decontamination method of this paper, quantity of disposal protective clothing is to be able to significantly reduce.

  3. Optical Illusions and Effects on Clothing Design

    Directory of Open Access Journals (Sweden)

    Saliha AĞAÇ

    2015-06-01

    Full Text Available “Visual perception” is in the first ranking between the types of perception. Gestalt Theory of the major psychological theories are used in how visual perception realizes and making sense of what is effective in this process. In perception stage brain tak es into account not only stimulus from eyes but also expectations arising from previous experience and interpreted the stimulus which are not exist in the real world as if they were there. Misperception interpretations that brain revealed are called as “Pe rception Illusion” or “Optical Illusion” in psychology. Optical illusion formats come into existence due to factors such as brightness, contrast, motion, geometry and perspective, interpretation of three - dimensional images, cognitive status and color. Opti cal illusions have impacts of different disciplines within the study area on people. Among the most important types of known optical illusion are Oppel - Kundt, Curvature - Hering, Helzholtz Sqaure, Hermann Grid, Muller - Lyler, Ebbinghaus and Ponzo illusion etc . In fact, all the optical illusions are known to be used in numerous area with various techniques and different product groups like architecture, fine arts, textiles and fashion design from of old. In recent years, optical illusion types are frequently us ed especially within the field of fashion design in the clothing model, in style, silhouette and fabrics. The aim of this study is to examine the clothing design applications where optical illusion is used and works done in this subject. Some research of the design with the changing fashion of clothes of different types of optical illusions is discussed with examples of their effects on visual perception. In the study, optical illusory clothing models are scanned by visual analysis from documents like film , video, picture, web pages. The findings were analyzed in terms of the surface and design and effects of the optical illusion on clothing design has tried to put

  4. Non-iterative distance constraints enforcement for cloth drapes simulation

    Science.gov (United States)

    Hidajat, R. L. L. G.; Wibowo, Arifin, Z.; Suyitno

    2016-03-01

    A cloth simulation represents the behavior of cloth objects such as flag, tablecloth, or even garments has application in clothing animation for games and virtual shops. Elastically deformable models have widely used to provide realistic and efficient simulation, however problem of overstretching is encountered. We introduce a new cloth simulation algorithm that replaces iterative distance constraint enforcement steps with non-iterative ones for preventing over stretching in a spring-mass system for cloth modeling. Our method is based on a simple position correction procedure applied at one end of a spring. In our experiments, we developed a rectangle cloth model which is initially at a horizontal position with one point is fixed, and it is allowed to drape by its own weight. Our simulation is able to achieve a plausible cloth drapes as in reality. This paper aims to demonstrate the reliability of our approach to overcome overstretches while decreasing the computational cost of the constraint enforcement process due to an iterative procedure that is eliminated.

  5. The Virtual Dressing Room

    DEFF Research Database (Denmark)

    Holte, Michael Boelstoft

    2013-01-01

    This paper presents a review of recent developments and future perspectives, addressing the problem of creating a virtual dressing room. First, we review the current state-of-the-art of exiting solutions and discuss their applicability and limitations. We categorize the exiting solutions into three...... kinds: (1) virtual real-time 2D image/video techniques, where the consumer gets to superimpose the clothes on their real-time video to visualize themselves wearing the clothes. (2) 2D and 3D mannequins, where a web-application uses the body measurements provided by the customer, to superimpose...... and their demands to a virtual dressing room....

  6. Clothed Particles in Quantum Electrodynamics and Quantum Chromodynamics

    Directory of Open Access Journals (Sweden)

    Shebeko Alexander

    2016-01-01

    Full Text Available The notion of clothing in quantum field theory (QFT, put forward by Greenberg and Schweber and developed by M. Shirokov, is applied in quantum electrodynamics (QED and quantum chromodynamics (QCD. Along the guideline we have derived a novel analytic expression for the QED Hamiltonian in the clothed particle representation (CPR. In addition, we are trying to realize this notion in QCD (to be definite for the gauge group SU(3 when drawing parallels between QCD and QED.

  7. Effect of Clothing on Measurement of Bone Mineral Density.

    Science.gov (United States)

    McNamara, Elizabeth A; Feldman, Anna Z; Malabanan, Alan O; Abate, Ejigayehu G; Whittaker, LaTarsha G; Yano-Litwin, Amanda; Dorazio, Jolene; Rosen, Harold N

    2016-01-01

    It is unknown whether allowing patients to have BMD (bone mineral density) studies acquired while wearing radiolucent clothing adlib contributes appreciably to the measurement error seen. To examine this question, a spine phantom was scanned 30 times without any clothing, while draped with a gown, and while draped with heavy winter clothing. The effect on mean BMD and on SD (standard deviation) was assessed. The effect of clothing on mean or SD of the area was not significant. The effect of clothing on mean and SD for BMD was small but significant and was around 1.6% for the mean. However, the effect on BMD precision was much more clinically important. Without clothing the spine phantom had an least significant change of 0.0077 gm/cm(2), while when introducing variability of clothing the least significant change rose as high as 0.0305 gm/cm(2). We conclude that, adding clothing to the spine phantom had a small but statistically significant effect on the mean BMD and on variance of the measurement. It is unlikely that the effect on mean BMD has any clinical significance, but the effect on the reproducibility (precision) of the result is likely clinically significant. Copyright © 2016 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

  8. The influence of clothing weight and bulk on metabolic rate when wearing protective clothing

    NARCIS (Netherlands)

    Dorman, L.; Havenith, G.

    2005-01-01

    Protective clothing is worn in many industrial and military situations. Although worn for protection from one or more hazards, the clothing can have secondary effects which may limit the ability of the worker to perform the tasks required of the job. Protective clothing can add significantly to the

  9. Forensic Pollen Evidence from Clothes by the Tape Adhesive Method

    Directory of Open Access Journals (Sweden)

    Chun-Liang Wu

    2006-06-01

    Full Text Available Collection and identification of pollen is becoming important in forensic applications. Many criminal cases have been reported to link suspects to the crime scene by analysis of pollen. Several methods have been used in the pollen collection and analysis, but they are expensive and tedious. Therefore, it is important to develop a simple method to collect pollen grains from clothes. We tried to recover pollen from clothing surface by using the sticky tapes method. The tape adhesive method has been widely used for sample collection for various purposes, but the efficiency of recovery of invisible pollen from clothes has rarely been reported. Therefore, to test the efficiency of the tape adhesive method in recovering pollen from clothes is important. The first author wore clothes that were made from textile S made by the mixture of cotton 60% and polyester fiber 40% to collect pollen from 26 different areas mostly in the northern part of Taiwan and then used cellophane tape D (Sirchie Finger Print Lab., Inc-No. 131LT4 to recover them from different body parts. Twenty-six pollen taxa were detected in different parts of clothes depending upon what kind of plant the first author stayed near. From the results, we concluded that the tape adhesive method is suitable in recovering pollen from clothes. We have suggested that the tape adhesive method could be part of methods for collecting pollen from clothes of suspects. It is simpler, faster and less expensive than other methods.

  10. An Environmental Perspective on Clothing Consumption

    DEFF Research Database (Denmark)

    Gwozdz, Wencke; Nielsen, Kristian S.; Mueller, Tina

    2017-01-01

    Efforts to decrease the environmental impact of today’s clothing industry across the entire process of production, purchase, maintenance, and disposal can be driven by either suppliers or consumers. Changing the behavior of the latter, however, requires an understanding of current clothing...... consumption patterns—a currently under-researched area. We therefore shed more light on these patterns in the purchase, use and maintenance, and discard phases by analyzing unique data on 4617 adult consumers (aged 18–65) from Germany, Poland, Sweden, and the U.S., who we divide into five segments based......’ different reported purchase behavior and a varying openness to alternative business models, we identify differences in willingness to pay for clothing made of material that is more environmentally friendly than conventional fabrics. These observations suggest several promising directions for environmental...

  11. Advanced Clothing System

    Science.gov (United States)

    Broyan, James; Orndoff, Evelyne

    2014-01-01

    The goal of the Advanced Clothing System (ACS) is to use advanced commercial off-the-shelf fibers and antimicrobial treatments with the goal of directly reducing the mass and volume of a logistics item. The current clothing state-of-the-art on the International Space Station (ISS) is disposable, mostly cotton-based, clothing with no laundry provisions. Each clothing article has varying use periods and will become trash. The goal is to increase the length of wear of the clothing to reduce the logistical mass and volume. The initial focus has been exercise clothing since the use period is lower. Various ground studies and an ISS technology demonstration have been conducted to evaluate clothing preference and length of wear. The analysis indicates that use of ACS selected garments (e.g. wool, modacrylic, polyester) can increase the breakeven point for laundry to 300 days.

  12. ARDressCode: Augmented Dressing Room with Tag-based Motion Tracking and Real-Time Clothes Simulation

    DEFF Research Database (Denmark)

    Kjærside, Krista; Kortbek, Karen Johanne; Møller, Henrik Hedegaard

    2005-01-01

    This paper introduces a new augmented reality concept for dressing rooms enabling a customer to combine a tactile experience of the fabrics with easy simulated try-on. The dressing room has a camera and a projection surface instead of a mirror. The customers stick a few visual tags to their normal...... clothes. Then the ARDressCode application features motion capture and provides an AR video stream on the AR “mirror ” with the selected piece of clothes mixed in and fitted to the customer body. Design issues and technical implementation as well as the prospects of further development of the techniques...

  13. Virtual Retail Simulations in Second Life

    Science.gov (United States)

    Drake-Bridges, Erin; Strelzoff, Andrew; Sulbaran, Tulio

    2011-01-01

    This paper explores the use of simulations in virtual reality to teach students the fundamental processes behind retailing and product development. The project described involved one class of students who developed their own clothing lines of "virtual merchandise." A second class of students then "purchased" the wholesale…

  14. STUDY PAPER ON EDUCATION USING VIRTUAL REALITY.

    OpenAIRE

    Anamika Modi*; Ayush Jaiswal; Princy Jain

    2016-01-01

    This report provides a short study of the field of virtual reality, highlighting application domains, technological requirements, and currently available solutions. In today’s market, virtual reality is playing an crucial role for the humans. If we consider the foreign countries than using virtual reality they try to create the same feelings not only for the school children’s as well as for the upper education. In this paper, we have study the technologies used in virtual reality.

  15. A virtual tour of virtual reality

    Science.gov (United States)

    Harris, Margaret

    2018-03-01

    Virtual-reality glasses might still be on the starting blocks, but plenty of companies are working on the technology. Margaret Harris tries on some examples at the Photonics West show in San Francisco

  16. SPME-Based Ca-History Method for Measuring SVOC Diffusion Coefficients in Clothing Material.

    Science.gov (United States)

    Cao, Jianping; Liu, Ningrui; Zhang, Yinping

    2017-08-15

    Clothes play an important role in dermal exposure to indoor semivolatile organic compounds (SVOCs). The diffusion coefficient of SVOCs in clothing material (D m ) is essential for estimating SVOC sorption by clothing material and subsequent dermal exposure to SVOCs. However, few studies have reported the measured D m for clothing materials. In this paper, we present the solid-phase microextraction (SPME) based C a -history method. To the best of our knowledge, this is the first try to measure D m with known relative standard deviation (RSD). A thin sealed chamber is formed by a circular ring and two pieces of flat SVOC source materials that are tightly covered by the targeted clothing materials. D m is obtained by applying an SVOC mass transfer model in the chamber to the history of gas-phase SVOC concentrations (C a ) in the chamber measured by SPME. D m 's of three SVOCs, di-iso-butyl phthalate (DiBP), di-n-butyl phthalate (DnBP), and tris(1-chloro-2-propyl) phosphate (TCPP), in a cotton T-shirt can be obtained within 16 days, with RSD less than 3%. This study should prove useful for measuring SVOC D m in various sink materials. Further studies are expected to facilitate application of this method and investigate the effects of temperature, relative humidity, and clothing material on D m .

  17. The design of clothing washable labels based on NFC

    Directory of Open Access Journals (Sweden)

    Liu Zhengdong

    2018-01-01

    Full Text Available In this paper, With the rapid development of NFC (Near Field Communication technology and the digital advancement of clothing industry, a kind of clothing washable labels based on NFC is proposed and designed in this paper. It can be used to compose a clothing information system together with NFC mobile phones, mobile Internet, enterprise information centers, etc. By experiment, consumers can read and write NFC washable labels through their mobile phones, which can be quicker and more convenient to obtain clothing washing and maintenance information. Moreover, the NFC washable labels conform to the washing requirements of washable labels. The emergence of the NFC washable labels provides a physical basis for smart matching recommendations and precise directional push of clothing advertising information for consumers.

  18. Influence of Clothing Fabrics on Skin Microcirculation

    Institute of Scientific and Technical Information of China (English)

    CHENG Ling; PAN Ning; ZHAO Lian-ying; HUAUNG Gu

    2010-01-01

    This study investigated the effects of clothing fabric on human skin microcirculation. Once skin is covered with a clothing fabric, human sensations, namely, coolness, warmth, softness, and roughness, are amused immediately, and the cutaneous micrecireulation may be changed consequently. Since the complex relationships of the human skin, the environment, and the clothing, there is few publication focusing on the physiological responses of the skin to the fabrics. In this paper, a Laser Doppler Flowmetry (LDF) was used to test the dynamic responses of the skin blood flow when the fabric was placed on the skin. Effects of different fabrics on the skin blood flux were investigated. The results show that cold stimulation of fabric has remarkable influences on the skin blood flux, and the surface properties of fabric are of importance to affect the human skin blood flow.

  19. Shopping for clothes: Body satisfaction, appearance investment, and functions of clothing among female shoppers.

    Science.gov (United States)

    Tiggemann, Marika; Lacey, Catherine

    2009-09-01

    The present study aimed to investigate the link between clothing and body experience in women of different ages. Participants were 162 female clothes shoppers between the ages of 18 and 55 who completed questionnaire measures of body image, functions of clothing, self-esteem, and enjoyment of clothes shopping. It was found that clothing was worn primarily for assurance and fashion by women of all ages. On the other hand, BMI and body dissatisfaction were related to the use of clothing for camouflage purposes and to a more negative clothes shopping experience. Both components of appearance investment were related to choice of clothes for fashion and assurance. However, the self-evaluative salience component was negatively related, while the motivational salience was positively related, to enjoyment of clothes shopping. It was concluded that although clothing is an under-researched aspect of body image, it represents an important part of women's appearance management, whatever their age.

  20. Production of galacto-oligosaccharides from lactose by Aspergillus oryzae beta-galactosidase immobilized on cotton cloth.

    Science.gov (United States)

    Albayrak, Nedim; Yang, Shang-Tian

    2002-01-05

    The production of galacto-oligosaccharides (GOS) from lactose by A. oryzae beta-galactosidase immobilized on cotton cloth was studied. The total amounts and types of GOS produced were mainly affected by the initial lactose concentration in the reaction media. In general, more and larger GOS can be produced with higher initial lactose concentrations. A maximum GOS production of 27% (w/w) of initial lactose was achieved at 50% lactose conversion with 500 g/L of initial lactose concentration. Tri-saccharides were the major types of GOS formed, accounting for more than 70% of the total GOS produced in the reactions. Temperature and pH affected the reaction rate, but did not result in any changes in GOS formation. The presence of galactose and glucose at the concentrations encountered near maximum GOS greatly inhibited the reactions and reduced GOS yield by as much as 15%. The cotton cloth as the support matrix for enzyme immobilization did not affect the GOS formation characteristics of the enzyme, suggesting no diffusion limitation in the enzyme carrier. The thermal stability of the enzyme increased approximately 25-fold upon immobilization on cotton cloth. The half-life for the immobilized enzyme on cotton cloth was more than 1 year at 40 degrees C and 48 days at 50 degrees C. Stable, continuous operation in a plugflow reactor was demonstrated for 2 weeks without any apparent problem. A maximum GOS production of 21 and 26% (w/w) of total sugars was attained with a feed solution containing 200 and 400 g/L of lactose, respectively, at pH 4.5 and 40 degrees C. The corresponding reactor productivities were 80 and 106 g/L/h, respectively, which are at least several-fold higher than those previously reported. Copyright 2002 John Wiley & Sons, Inc.

  1. The design of clothing washable labels based on NFC

    OpenAIRE

    Liu Zhengdong; Ma Tianyu

    2018-01-01

    In this paper, With the rapid development of NFC (Near Field Communication) technology and the digital advancement of clothing industry, a kind of clothing washable labels based on NFC is proposed and designed in this paper. It can be used to compose a clothing information system together with NFC mobile phones, mobile Internet, enterprise information centers, etc. By experiment, consumers can read and write NFC washable labels through their mobile phones, which can be quicker and more conven...

  2. Cloth in the Cult

    DEFF Research Database (Denmark)

    Nosch, Marie-Louise Bech; Perna, Massimo

    2001-01-01

    analysis of the use and function of cloth in the Mycenaean cult. It is demonstrated that there is a division between cloth for offerings and cloth for culk personnel......analysis of the use and function of cloth in the Mycenaean cult. It is demonstrated that there is a division between cloth for offerings and cloth for culk personnel...

  3. Environmental benefits from reusing clothes

    DEFF Research Database (Denmark)

    Farrant, Laura; Olsen, Stig Irving; Wangel, Arne

    2010-01-01

    and Estonia, it was assumed that over 100 collected items 60 would be reused, 30 recycled in other ways and 10 go to final disposal Using these inputs, the LCA showed that the collection, processing and transport of second-hand clothing has insignificant impacts on the environment in comparison to the savings...... of establishing the net benefits from introducing clothes reuse. Indeed, it enables to take into consideration all the activities connected to reusing clothes, including, for instance, recycling and disposal of the collected clothes not suitable for reuse. In addition, the routes followed by the collected clothes....... Conclusions The results of the study show that clothes reuse can significantly contribute to reducing the environmental burden of clothing. Recommendations and perspectives It would be beneficial to apply other methods for estimating the avoided production of new clothes in order to check the validity...

  4. EAP application to artificial tactile feel display of virtual reality

    Science.gov (United States)

    Konyo, Masashi; Tadokoro, Satoshi; Takamori, Toshi; Oguro, Keisuke

    2001-07-01

    A tactile feel display device for virtual reality was developed using Nafion-Platinum composite type EAP actuator (known as IPMC or ICPF). Conventional tactile displays can hardly express tactile human feeling of the fine touch of the surface of a cloth, because their mechanisms cannot excite minute distributed stimuli on human skin. We propose a new ciliary device using ICPF actuators. The ICPF has sufficient softness, utilizing the passive material property, that complex control is not required. The low drive voltage is safe enough for the touch of fingers. Its simple operation mechanism allows miniaturization for practical equipments. The developed device was designed with a number of cilia consisting of ICPF actuators, where a cilium is 2 mm wide and 5 mm long. An ICPF membrane is cut into pectination, and only the cilium part is plated and has a function of an actuator. An inclined configuration of the cilia produces variety of stimuli to human skin controlling frequencies. We tried to display both pressure and vibration at the same time using modulated low and high frequencies. The result clearly shows that over 80% of the subjects sensed some special tactile feeling. A comparison with real material samples shows that this display can present a subtle distinction of tactile feeling of cloth, especially like a towel and denim.

  5. Radiation protective clothing

    International Nuclear Information System (INIS)

    Fujinuma, Tadashi; Tamura, Shoji; Ijiri, Yasuo.

    1988-01-01

    Purpose: To obtain radiation protective clothings of excellent workability and durability. Constitution: Protective clothings of the present invention comprise shielding materials for the upper-half of the body having lead foils laminated on one surface and shielding materials for the lower-half of the body a resin sheet containing inorganic powders of high specific gravity. Such protective clothings have a frexibility capable of followings after the movement of the upper-half body and easily follow after the movement such as acute bending of the body near the waste in the lower-half body. (Kamimura, M.)

  6. [Clothing and heat disorder].

    Science.gov (United States)

    Satsumoto, Yayoi

    2012-06-01

    The influence of the clothing material properties(like water absorbency and rapid dryness, water vapor absorption, water vapor permeability and air permeability) and the design factor of the clothing(like opening condition and fitting of clothing), which contributed to prevent heat disorder, was outlined. WBGT(wet-bulb globe temperature) is used to show a guideline for environmental limitation of activities to prevent heat disorder. As the safety function is more important than thermal comfort for some sportswear and protective clothing with high cover area, clothing itself increases the risk of heat disorder. WBGT is corrected by CAF (clothing adjustment factor) in wearing such kind of protective clothing.

  7. Impact of nurses clothing on anxiety of hospitalised children.

    Science.gov (United States)

    Roohafza, Hamidreza; Pirnia, Afsaneh; Sadeghi, Masoumeh; Toghianifar, Nafiseh; Talaei, Mohammad; Ashrafi, Mahmood

    2009-07-01

    To investigate anxiety levels in two groups of children exposed to nurses with white vs. coloured clothing in a university hospital in Iran. Hospitalisation causes anxiety in children and it is documented that nurses have an important role in alleviating children's distress and anxiety. Nurses characteristics, including their clothing is a factor that affects quality of care through child-nurse relationship. Clinical trial. Children (n = 92) aged 7-15 years old hospitalised for 3-5 days in paediatric surgery ward were exposed to nurses in white or coloured clothing. Children's anxiety was assessed on admission and at discharge using Revised Children's Manifest Anxiety Scale. Children exposed to white nursing uniforms showed higher anxiety levels compared with children exposed to coloured nursing clothing (p 11 years old (guidance school) and living in families with more than four members were predictors of lower global anxiety scores. Providing a child-friendly environment through colourful nursing clothing can promote nurses' relationship with hospitalised children. This can satisfy children's expectations of the nursing care and alleviates the need for meeting ideals of nursing care through wearing a white nursing uniform provided that standards of nursing care are favoured. Using colourful nursing clothing in paediatric wards reduces anxiety as a psychological parameter which delays improvement and provides a child-friendly environment that helps promotion of quality of nursing care.

  8. Protection from solar ultraviolet radiation by clothing

    Energy Technology Data Exchange (ETDEWEB)

    Pailthorpe, M. [New South Wales Univ., Kensington, NSW (Australia)

    1996-12-31

    The recently published Australia/New Zealand Standard AS/NZS 4399: l996 `Sun Protective Clothing - Evaluation and Classification` specifies an in vitro spectrophotometric method for the measurement of the ultraviolet (WR) transmission of textiles. Ultraviolet Protection Factors (UPF) are then calculated by convolving the UVR transmission data with standard CIE erythemal response data and ARL solar irradiance data. At the present time the scope of the standard is limited to loose fitting dry clothing. Virtually every textile parameter has an influence on the UPF of the finished garment and hence on the protection afforded to skin from the harmful effects of solar UVR radiation. Textile parameters such as fibre type, the method of spinning the yarn, fabric structure, cover factor, colorant, UVR absorbers and finishing methods determine the UPF of the fabric and hence must be controlled from batch to batch. Since garments generally shrink when washed, multiple wearing and washing cycles usually cause an increase in fabric UPF. Adventitious soiling of fabrics and the absorption of certain components of domestic laundry formulations, e g fluorescent whitening agents, increase fabric UPF ratings. Garments with a high degree of elasticity, e g nylon/lycra sportswear, that are stretched on to fit, will obviously have lower UPFs when stretched than when relaxed. In general fabrics worn in a wet state provide lower protection than when worn dry. On Australia`s most extreme summer day it has been estimated that there are 30 MEDs (minimal erythemal doses) in a dawn to dusk exposure. Thus outdoor workers should be provided with UPF 30 clothing, or better. Results from recent experiments using SK-II hairless mice dressed in UPF 50 `sunsuits` have shown that the mice developed no sun induced skin cancers on the skin areas protected by the UPF 50 fabric whereas multiple tumours developed on the unprotected skin.

  9. Protection from solar ultraviolet radiation by clothing

    International Nuclear Information System (INIS)

    Pailthorpe, M.

    1996-01-01

    The recently published Australia/New Zealand Standard AS/NZS 4399: l996 'Sun Protective Clothing - Evaluation and Classification' specifies an in vitro spectrophotometric method for the measurement of the ultraviolet (WR) transmission of textiles. Ultraviolet Protection Factors (UPF) are then calculated by convolving the UVR transmission data with standard CIE erythemal response data and ARL solar irradiance data. At the present time the scope of the standard is limited to loose fitting dry clothing. Virtually every textile parameter has an influence on the UPF of the finished garment and hence on the protection afforded to skin from the harmful effects of solar UVR radiation. Textile parameters such as fibre type, the method of spinning the yarn, fabric structure, cover factor, colorant, UVR absorbers and finishing methods determine the UPF of the fabric and hence must be controlled from batch to batch. Since garments generally shrink when washed, multiple wearing and washing cycles usually cause an increase in fabric UPF. Adventitious soiling of fabrics and the absorption of certain components of domestic laundry formulations, e g fluorescent whitening agents, increase fabric UPF ratings. Garments with a high degree of elasticity, e g nylon/lycra sportswear, that are stretched on to fit, will obviously have lower UPFs when stretched than when relaxed. In general fabrics worn in a wet state provide lower protection than when worn dry. On Australia's most extreme summer day it has been estimated that there are 30 MEDs (minimal erythemal doses) in a dawn to dusk exposure. Thus outdoor workers should be provided with UPF 30 clothing, or better. Results from recent experiments using SK-II hairless mice dressed in UPF 50 'sunsuits' have shown that the mice developed no sun induced skin cancers on the skin areas protected by the UPF 50 fabric whereas multiple tumours developed on the unprotected skin

  10. Radiation protective clothing

    International Nuclear Information System (INIS)

    Watanabe, Choshin; Takaura, Katsutoshi

    1998-01-01

    An external clothing as a main portion of the radiation protective clothing of the present invention is adapted to cover substantially the entire body of a wearer, comprises a moisture permeable material partially or entirely, and has an air supply device equipped with a filter for feeding air to a head portion of the wearer in the external clothing. Cleaned air filtered by the filter is supplied to the head portion of a wearer in the external clothing. The air passes through remarkably perspiratory head, face, shoulder, chest and back portions to remove heat and sweat at sensitively important upper portions of a body, so that humidity is released to remove fatigues and improve workability. In addition, since some extent of internal pressure is exerted to the inside of the external clothing by the air supply, contaminated air does not intrude from the outside to the external clothing. Since the air supply device is attached and carried to the external clothing, there is no air line hose which disturbs operation. (I.S.)

  11. A Precise Method for Cloth Configuration Parsing Applied to Single-Arm Flattening

    Directory of Open Access Journals (Sweden)

    Li Sun

    2016-04-01

    Full Text Available In this paper, we investigate the contribution that visual perception affords to a robotic manipulation task in which a crumpled garment is flattened by eliminating visually detected wrinkles. In order to explore and validate visually guided clothing manipulation in a repeatable and controlled environment, we have developed a hand-eye interactive virtual robot manipulation system that incorporates a clothing simulator to close the effector-garment-visual sensing interaction loop. We present the technical details and compare the performance of two different methods for detecting, representing and interpreting wrinkles within clothing surfaces captured in high-resolution depth maps. The first method we present relies upon a clustering-based method for localizing and parametrizing wrinkles, while the second method adopts a more advanced geometry-based approach in which shape-topology analysis underpins the identification of the cloth configuration (i.e., maps wrinkles. Having interpreted the state of the cloth configuration by means of either of these methods, a heuristic-based flattening strategy is then executed to infer the appropriate forces, their directions and gripper contact locations that must be applied to the cloth in order to flatten the perceived wrinkles. A greedy approach, which attempts to flatten the largest detected wrinkle for each perception-iteration cycle, has been successfully adopted in this work. We present the results of our heuristic-based flattening methodology which relies upon clustering-based and geometry-based features respectively. Our experiments indicate that geometry-based features have the potential to provide a greater degree of clothing configuration understanding and, as a consequence, improve flattening performance. The results of experiments using a real robot (as opposed to simulated robot also confirm our proposition that a more effective visual perception system can advance the performance of cloth

  12. FRC : fire retardant clothing

    Energy Technology Data Exchange (ETDEWEB)

    Denhard, G. [Manitoba Hydro, Winnipeg, MB (Canada)

    2006-07-01

    This presentation provided details of the Manitoba Hydro's flame resistant clothing (FRC) program, which was devised after 2 separate incidents in 1998 where clothing contributed to the extent of personnel injuries. The FRC program became corporate-wide in 2005, after the utility's FRC steering committee completed an investigation of the relevant industry standards and regulatory requirements needed to develop an FRC implementation plan. Standards used to prepare the FRC policy included the standard performance specification for textile materials; the standard test method for determining arc thermal performance values of materials for clothing; the standard specification for arc and flame resistant rainwear; and the Occupational Safety and Health Administration (OSHA) 1910.269 regulation, which states that employers shall ensure that employees are not wearing clothing that could increase the extent of potential injuries. A consultation of the utility's corporate policies included the uniform, clothing and equipment policy, and the corporate safety and occupational health rule. As a result of the FRC program, Manitoba Hydro now provides personal protective clothing and equipment; flame resistant clothing; and clothing for regular exposure to certain conditions. FRC must be worn when entering energized AC or DC switchyards; operational maintenance or construction sites where a clothing ignition hazard exists; and in any area designated as requiring workers to wear FRC. The program was designed using a risk-based approach, and employees were divided into the following 4 groups: groups requiring that all layers of their clothing be FRC; groups requiring FRC as the outer layer of their clothing; groups required to wear FRC only when entering certain work sites; and special case personnel dealt with on a case-by-case basis. Implementation costs of the program were estimated at $2.3 million, with a $500,000 annual cost. However, annual costs for 2005 were

  13. Evaluation of three-dimensional virtual perception of garments

    Science.gov (United States)

    Aydoğdu, G.; Yeşilpinar, S.; Erdem, D.

    2017-10-01

    In recent years, three-dimensional design, dressing and simulation programs came into prominence in the textile industry. By these programs, the need to produce clothing samples for every design in design process has been eliminated. Clothing fit, design, pattern, fabric and accessory details and fabric drape features can be evaluated easily. Also, body size of virtual mannequin can be adjusted so more realistic simulations can be created. Moreover, three-dimensional virtual garment images created by these programs can be used while presenting the product to end-user instead of two-dimensional photograph images. In this study, a survey was carried out to investigate the visual perception of consumers. The survey was conducted for three different garment types, separately. Questions about gender, profession etc. was asked to the participants and expected them to compare real samples and artworks or three-dimensional virtual images of garments. When survey results were analyzed statistically, it is seen that demographic situation of participants does not affect visual perception and three-dimensional virtual garment images reflect the real sample characteristics better than artworks for each garment type. Also, it is reported that there is no perception difference depending on garment type between t-shirt, sweatshirt and tracksuit bottom.

  14. Theft of Virtual Property — Towards Security Requirements for Virtual Worlds

    Science.gov (United States)

    Beyer, Anja

    The article is focused to introduce the topic of information technology security for Virtual Worlds to a security experts’ audience. Virtual Worlds are Web 2.0 applications where the users cruise through the world with their individually shaped avatars to find either amusement, challenges or the next best business deal. People do invest a lot of time but beyond they invest in buying virtual assets like fantasy witcheries, wepaons, armour, houses, clothes,...etc with the power of real world money. Although it is called “virtual” (which is often put on the same level as “not existent”) there is a real value behind it. In November 2007 dutch police arrested a seventeen years old teenager who was suspicted to have stolen virtual items in a Virtual World called Habbo Hotel [Reuters07]. In order to successfully provide security mechanisms into Virtual Worlds it is necessarry to fully understand the domain for which the security mechansims are defined. As Virtual Worlds must be clasified into the domain of Social Software the article starts with an overview of how to understand Web 2.0 and gives a short introduction to Virtual Worlds. The article then provides a consideration of assets of Virtual Worlds participants, describes how these assets can be threatened and gives an overview of appopriate security requirements and completes with an outlook of possible countermeasures.

  15. Comparison of energy expenditure when moving on wet and dry clothes.

    OpenAIRE

    Hrubý, Pavel

    2013-01-01

    Title: Comparison of energy expenditure when moving on wet and dry clothes. Objectives: The aim of this study is to compare energy expenditure based on heart rate when moving in dryand wet clothes in different speeds. Methods: Quantitative research and subsequent intra-individual comparison of pulse frequency and energy expenditure when moving in dry and wet clothes. Movements were conducted on a treadmill and heart rate was measured by using sporttesters. Results: From the results we can ded...

  16. KASTAMONU TRADITIONAL WOMEN CLOTHES

    Directory of Open Access Journals (Sweden)

    E.Elhan ÖZUS

    2015-08-01

    Full Text Available Clothing is a unique dressing style of a community, a period or a profession. In clothing there is social status and difference principle rather than fashion. In this context, the society created a clothing style in line with its own customs, traditions and social structure. One of the features separating societies from each other and indicating their cultural and social classes is the clothing style. As it is known, traditional Turkish clothes reflecting the characteristics of Turkish society is our most beautiful heritage from past to present. From this heritage there are several examples of women's clothes c arried to present. When these examples are examined, it is possible to see the taste, the way of understanding art, joy and the lifestyle of the history. These garments are also the documents outlining the taste and grace of Turkish people. In the present study, traditional Kastamonu women's clothing, that has an important place in traditional cultural clothes of Anatolia, is investigated . The method of the present research is primarily defined as the examination of the written sources. The study is complet ed with the observations and examinations made in Kastamonu. According to the findings of the study, traditional Kastamonu women's clothing are examined and adapted to todays’ clothing.

  17. Burns and military clothing.

    Science.gov (United States)

    McLean, A D

    2001-02-01

    Burn injury is a ubiquitous threat in the military environment. The risks during combat are well recognised, but the handling of fuel, oil, munitions and other hot or flammable materials during peacetime deployment and training also imposes an inherent risk of accidental burn injury. Over the last hundred years, the burn threat in combat has ranged from nuclear weapons to small shoulder-launched missiles. Materials such as napalm and white phosphorus plainly present a risk of burn, but the threat extends to encompass personnel in vehicles attacked by anti-armour weapons, large missiles, fuel-air explosives and detonations/conflagrations on weapons platforms such as ships. Large numbers of burn casualties were caused at Pearl Harbor, in Hiroshima and Nagasaki, Vietnam, during the Arab/Israeli Wars and in the Falkland Islands conflict. The threat from burns is unlikely to diminish, indeed new developments in weapons seek to exploit the vulnerability of the serviceman and servicewoman to burns. Clothing can be a barrier to some types of burn--both inherently in the properties of the material, but also by trapping air between clothing layers. Conversely, ignition of the clothing may exacerbate a burn. There is hearsay that burnt clothing products within a wound may complicate the clinical management, or that materials that melt (thermoplastic materials) should not be worn if there is a burn threat. This paper explores the incidence of burn injury, the mechanisms of heat transfer to bare skin and skin covered by materials, and the published evidence for the complication of wound management by materials. Even light-weight combat clothing can offer significant protection to skin from short duration flash burns; the most vulnerable areas are the parts of the body not covered--face and hands. Multilayered combat clothing can offer significant protection for short periods from engulfment by flames; lightweight tropical wear with few layers offers little protection. Under

  18. Virtual Display Design and Evaluation of Clothing: A Design Process Support System

    Science.gov (United States)

    Zhang, Xue-Fang; Huang, Ren-Qun

    2014-01-01

    This paper proposes a new computer-aided educational system for clothing visual merchandising and display. It aims to provide an operating environment that supports the various stages of display design in a user-friendly and intuitive manner. First, this paper provides a brief introduction to current software applications in the field of…

  19. A RESEARCH ON EXAMINATION OF SWIMMER CLOTHING FOR INCREASING SPORTSMAN PERFORMANCE

    Directory of Open Access Journals (Sweden)

    Hacer ÖLÇER

    2014-07-01

    Full Text Available The purpose of this research is to present the problems of swimmers about swimming clothing in trainings or competitions and their expectations from swimming clothing for increasing their performan ce . Descriptive method was used in the research . Survey was developed as a data collection tool on clothing comfort parameters and functional design p roperties that swimming clothing should have . The universe of the r esearch is composed of male and female swimmers interested in swimming sport in T urkey, in the province of Çorum. And the sample is composed of 50 swimmers who participate in the research v oluntarily among the members of Olympic Indoor Swimming Pool serving in Çorum Provincial Directorate of Youth Services and Spor ts . The findings were analyzed in Statistics Package Program in Social Sciences (SPSS. As a result of the r esearch ; it was determined that the problems experienced with the clothing were quick deform ation, restriction of movements, and the fact that fabric texture and sewing properties discomfort the skin and expectations from clothing were durability, ease of movement , to accord with the body and easy maintenance . It is considered that r esearch results shall be a guide for research and development activities to be performed about clothing comfort on both academic and sector basis for increasing sportive performan ce in running sport and protection of sportsmen health .

  20. Azerbaijan's Medieval Clothes and Jewelry

    Directory of Open Access Journals (Sweden)

    Yegana Aghamaliyeva

    2017-06-01

    Full Text Available In the 16thcentury high level of culture and art has positively influenced the development of clothing in Azerbaijan. In the 17thcentury in spite of paleness of manufactured fabric and its ornaments, clothing style completely reminds 16thcentury clothes. 18thcentury clothes distinguish with its high level of form and composition. In that period clothes were decorated by sewing. Traditional clothing set was completed by jewelries considered for neck, chest, arm and waist. In the second half of the 19th century, replacing of national clothes primarily happened in the capital city, and further spread in the other territories of Azerbaijan. Traditional clothing completely lost out at the beginning of the 20thcentury due to its unsustainability to compete with mass-produced clothes. Currently, when fashion designers prepare modern costumes they refer to the rich elements of our ancient clothing and apply them to their collections. Thus, they add historical national spirit to their clothing collections.

  1. Effect of Patternmaker’s Proficiency On the Creation of Clothing

    Directory of Open Access Journals (Sweden)

    Kim Kyoungok

    2017-06-01

    Full Text Available The effect of the patternmaker’s proficiency on the creation of clothing was investigated by the observation of the patternmaking process for clothing that satisfies the designer. We asked Japanese and French patternmakers to make a clothing pattern for the same design. The reasons for the differences in resultant clothing patterns and toiles made by the two patternmakers are discussed. Although the patternmaking processes used by the proficient patternmakers were similar, the resultant patterns were different owing to different recognition of the design. In particular, the shape and size of the collar that the designer emphasized in the illustration were different in the resultant patterns. Differences in patternmaking originated from differences in the patternmakers′ levels of expertise in terms of education, experience, and proficiency. However, the designer was satisfied with both patterns.

  2. THE INCREASING PHENOMENON OF SECOND-HAND CLOTHES PURCHASE: INSIGHTS FROM THE LITERATURE

    Directory of Open Access Journals (Sweden)

    Halimin Herjanto

    2016-03-01

    Full Text Available The global trend of second-hand clothing (SHC consumption is significantly increasing and unstoppable. This trend has made, and will continue to make, a huge impact in the clothing industry in virtually every part of the world. However, the number of studies on SHC are still limited and more importantly, the findings are mixed and inconclusive. This study investigates the trend in SHC research between 1990 and 2014. 131 published academic articles from different disciplines were collected and content analyzed and the results indicate that SHC research was highly focused on the topics of consumption behavior, textile disposal behavior, and SHC trading related issues. In addition, the results also show that SHC research was mainly conducted from the consumers’ point of view. With the increasing interest in SHC, this study attempts to develop a better understanding of SHC phenomena and provide clear future research directions to scholars in designing SHC related research.

  3. The thermal insulation difference of clothing ensembles on the dry and perspiration manikins

    International Nuclear Information System (INIS)

    Xiaohong, Zhou; Chunqin, Zheng; Yingming, Qiang; Holmér, Ingvar; Gao, Chuansi; Kuklane, Kalev

    2010-01-01

    There are about a hundred manikin users around the world. Some of them use the manikin such as 'Walter' and 'Tore' to evaluate the comfort of clothing ensembles according to their thermal insulation and moisture resistance. A 'Walter' manikin is made of water and waterproof breathable fabric 'skin', which simulates the characteristics of human perspiration. So evaporation, condensation or sorption and desorption are always accompanied by heat transfer. A 'Tore' manikin only has dry heat exchange by conduction, radiation and convection from the manikin through clothing ensembles to environments. It is an ideal apparatus to measure the thermal insulation of the clothing ensemble and allows evaluation of thermal comfort. This paper compares thermal insulation measured with dry 'Tore' and sweating 'Walter' manikins. Clothing ensembles consisted of permeable and impermeable clothes. The results showed that the clothes covering the 'Walter' manikin absorbed the moisture evaporated from the manikin. When the moisture transferred through the permeable clothing ensembles, heat of condensation could be neglected. But it was observed that heavy condensation occurred if impermeable clothes were tested on the 'Walter' manikin. This resulted in a thermal insulation difference of clothing ensembles on the dry and perspiration manikins. The thermal insulation obtained from the 'Walter' manikin has to be modified when heavy condensation occurs. The modified equation is obtained in this study

  4. Origin of clothing lice indicates early clothing use by anatomically modern humans in Africa.

    Science.gov (United States)

    Toups, Melissa A; Kitchen, Andrew; Light, Jessica E; Reed, David L

    2011-01-01

    Clothing use is an important modern behavior that contributed to the successful expansion of humans into higher latitudes and cold climates. Previous research suggests that clothing use originated anywhere between 40,000 and 3 Ma, though there is little direct archaeological, fossil, or genetic evidence to support more specific estimates. Since clothing lice evolved from head louse ancestors once humans adopted clothing, dating the emergence of clothing lice may provide more specific estimates of the origin of clothing use. Here, we use a Bayesian coalescent modeling approach to estimate that clothing lice diverged from head louse ancestors at least by 83,000 and possibly as early as 170,000 years ago. Our analysis suggests that the use of clothing likely originated with anatomically modern humans in Africa and reinforces a broad trend of modern human developments in Africa during the Middle to Late Pleistocene.

  5. Insertion Loss of Personal Protective Clothing

    International Nuclear Information System (INIS)

    Shull, D.J.

    1999-01-01

    The use of personal protective clothing that covers the head is a common practice in many industries. Such personal protective clothing will impact the sound pressure level and the frequency content of sounds to which the wearer will be exposed. The use of such clothing, then, may impact speech and alarm audibility. A measure of the impact of such clothing is its insertion loss. Insertion loss measurements were performed on four types of personal protective clothing in use by Westinghouse Savannah River Company personnel which utilize cloth and plastic hood configurations to protect the head. All clothing configurations tested at least partially cover the ears. The measurements revealed that insertion loss of the items tested was notable at frequencies above 1000 Hz only and was a function of material stiffness and acoustic flanking paths to the ear. Further, an estimate of the clothing's noise reduction rating reveals poor performance in that regard, even though the insertion loss of the test articles was significant at frequencies at and above 1000 Hz.'

  6. ‘Such Stuff as Dreams are Made On’: Encountering Clothes, Imagining Selves

    Directory of Open Access Journals (Sweden)

    Rosie Findlay

    2016-03-01

    Full Text Available In a personal essay, Ida Hattemer-Higgins describes the discovery of a decrepit store in Athens brimming with designer deadstock from decades past. The clothes she finds therein are the stuff of dreams for any fashion enthusiast, as is the store itself, a dim, forgotten place where garments are concealed like buried treasure under layers of dust, and where the author herself drifts into a state of semi-consciousness. What Hattemer-Higgins describes is the sensual pleasure of finding beautiful clothes, and the future self that she imagines being when she wears them. This article considers the relationship between the garments we wear and the selves we imagine into them in trying them on, buying them, and wearing them in every day life. These modalities are explored through a phenomenological discussion of dress, with reference to Hattemer-Higgins’s essay as well as my own lived experience of dressing.

  7. Radiological assessment of radioactive contamination on private clothing

    International Nuclear Information System (INIS)

    Schartmann, F.; Thierfeldt, S.

    2003-01-01

    In the very rare, cases where private clothing of persons working in a nuclear installation are inadvertently contaminated and this contamination is not detected when leaving the facility, there may be radiological consequences for this person as well as for members of his or her family. The VGB (Technische Vereinigung der Grosskraftwerksbetreiber) in Germany has investigated in detail the spread of contamination in nuclear power plants. Part of this evaluation programme was a radiological analysis which has been carried out by Brenk Systemplanung GmbH (Aachen/Germany). The radiological analysis started with the definition of the source term. It is highly unlikely that activities of more than 5 kBq 60 Co could leave a plant undetected on the body or the clothes. Nevertheless activities up to 50 kBq and different nuclide vectors were regarded. It has been found that 60 Co is the most important contaminant. The radiological analysis focusses on two types of contamination: particles and surface contamination. The pathways by which such a contamination can lead to an exposure by external irradiation or by ingestion depend on the type of contamination and are analysed in detail. For example, a particle could be retained in pockets or other parts of clothing and may lead to prolonged external irradiation until the piece of clothing is washed. The analysis is performed on the basis of conservative to realistic assumptions. In conclusion, the analysis has shown that especially particle contamination needs to be focussed on. However, by the advanced detection equipment in German plants doses which may pose a health hazard can safely be excluded. (authors)

  8. Measurement of Radioactive Contamination on Work Clothing of Workers Engaged in Decontamination Operations

    Science.gov (United States)

    Tsujimura, Norio; Yoshida, Tadayoshi; Hoshi, Katsuya

    To rationally judge the necessity of the contamination screening measurements required in the decontamination work regulations, a field study of the surface contamination density on the clothing of the workers engaged in decontamination operations was performed. The clothing and footwear of 20 workers was analyzed by high-purity germanium (HPGe) gamma-ray spectroscopy. The maximum radiocesium activities (134Cs + 137Cs) observed were 3600, 1300, and 2100 Bq for the work clothing, gloves, and boots, respectively, and the derived surface contamination densities were below the regulatory limit of 40 Bq/cm2. The results of this field study suggest that the upper bounds of the surface contamination density on the work clothing, gloves, and boots are predictable from the maximum soil loading density on the surface of clothing and footwear and the radioactivity concentration in soil at the site.

  9. The Users' Views on Different Types of Instructional Materials Provided in Virtual Reality Technologies

    Science.gov (United States)

    Yildirim, Gürkan

    2017-01-01

    Today, it is seen that developing technologies are tried to be used continuously in the learning environments. These technologies have rapidly been diversifying and changing. Recently, virtual reality technology has become one of the technologies that experts have often been dwelling on. The present research tries to determine users' opinions and…

  10. Towards an Inclusive Virtual Dressing Room for Wheelchair-Bound Customers

    DEFF Research Database (Denmark)

    Brooks, Anthony Lewis; Petersson, Eva

    2014-01-01

    This manuscript reports on a work-in-progress project evolving aside from a main undertaking; that of making a commercial ‘Internet of Things’ style product called “The Virtual Dressing Room (VDR)”. The project targets the process chain from designer and clothing manufacturer to retailer and end-...

  11. Mutating the realities in fashion design: virtual clothing for 3D avatars

    OpenAIRE

    Taylor, Andrew; Unver, Ertu

    2007-01-01

    “My fantasy is to be Uma Thurman in Kill Bill…and now I can… I’d pay $10 for her yellow jumpsuit and sword moves and I’m sure other people would too… \\ud Hundreds and thousands of humans living in different time zones around the world are choosing to re-create and express themselves as three dimensional avatars in 3D virtual online worlds: An avatar is defined as an interactive 3D image or character, representing a user in a multi-user virtual world/virtual reality space. 3D virtual online wo...

  12. Modeling Skin Injury from Hot Spills on Clothing

    Directory of Open Access Journals (Sweden)

    Torgrim Log

    2017-11-01

    Full Text Available The present work analyzes scald burns from hot beverages, such as coffee and tea, spilled on the lap, i.e., an incident that may occur in daily life. The Pennes bioheat equation is solved numerically for small spills wetting the clothing, i.e., the fabric prevents the spilled liquid from draining away. Temperatures are analyzed in the wetted fabric and the skin layers and the resulting skin injury is calculated based on the basal layer temperature. Parameters influencing burn severity, such as clothing thickness, liquid temperature, removal of fabric and thermal effects of post scald water cooling are analyzed. The fabric cools the water some but represents a threat since the entrapped water results in a prolonged heat supply. The liquid temperature turned out to be the most important injury parameter, where liquid temperature of about 80–85 °C seems to be a limit for developing superficial partial-thickness burns in the present minimum case, i.e., where the liquid just wets the fabric. Spilling water in excess of just wetting the fabric, more severe burns will develop at lower liquid temperatures due to the prolonged heat supply. Higher liquid temperatures will nearly instantly develop more severe burns. It is demonstrated that removal of the clothing within the first seconds after the spill may significantly reduce the scalding severity. The general advice is therefore to avoid excessive heating of beverages and, if the beverage is spilled, to quickly remove the wetted clothing. Prolonged tempered water cooling is advised to improve the healing processes.

  13. Measurement of radioactive contamination on work clothing of workers engaged in decontamination operations

    International Nuclear Information System (INIS)

    Tsujimura, Norio; Yoshida, Tadayoshi; Hoshi, Katsuya

    2016-01-01

    To rationally judge the necessity of the contamination screening measurements required in the decontamination work regulations, a field study of the surface contamination density on the clothing of the workers engaged in decontamination operations was performed. The clothing and footwear of 20 workers was analyzed by high-purity germanium (HPGe) gamma-ray spectroscopy. The maximum radiocesium activities ("1"3"4Cs + "1"3"7Cs) observed were 3600, 1300, and 2100 Bq for the work clothing, gloves, and boots, respectively, and the derived surface contamination densities were below the regulatory limit of 40 Bq/cm"2. The results of this field study suggest that the upper bounds of the surface contamination density on the work clothing, gloves, and boots are predictable from the maximum soil loading density on the surface of clothing and footwear and the radioactivity concentration in soil at the site. (author)

  14. PROTECTIVE CLOTHING BASED ON PERMSELECTIVE MEMBRANE AND CARBON ADSORPTION

    Energy Technology Data Exchange (ETDEWEB)

    J.G. Wijmans; J.O. Stull

    2001-11-07

    The goal of this project was to develop chemical protective clothing for use by DOE decontamination and decommissioning workers that is sufficiently water vapor permeable to keep the workers cool, thereby enhancing their productivity. This report describes the results of Phase II of a two-phase project to complete development of the novel permselective material and to test protective clothing made from the fabric. In Phase I a novel material incorporating a nonporous hydrophilic polyvinylacohol (PVA) layer, which is water vapor permeable but relatively impermeable to organic vapors, was developed. The results of the Phase I tests showed that the chemical resistance of the MTR material is comparable to that of Saranex/Tyvek materials, and that the comfort properties are closer to those of Tyvek (as measured in terms of CLO and permeability). Chemical resistance was measured using permeation tests against liquid dichloromethane. Comfort properties were ascertained by measuring the water vapor transmission of the material and by sweating manikin tests on whole protective suits. In addition, a cost/benefit analysis demonstrated that use of MTR's material technology could result in significant improvements in work productivity and cost savings if protective clothing items made from the new material were used more than once. In Phase II, MTR undertook a program to optimize the performance and production engineering for the new material technology. A partnership was formed with Kimberly-Clark Corporation to assist with a detailed evaluation of the MTR technology, and MTR used the services of Mr. Jeff Stull, President of the consulting firm International Personnel Protection, Inc., who conducted a detailed economic and application analysis for the developed fabric. The protective fabric manufacturing steps were simplified significantly, resulting in a 30% reduction in manufacturing costs and eliminating the necessity for capital investment in production equipment

  15. PROTECTIVE CLOTHING BASED ON PERMSELECTIVE MEMBRANE AND CARBON ADSORPTION

    International Nuclear Information System (INIS)

    Wijmans, J.G.; Stull, J.O.

    2001-01-01

    The goal of this project was to develop chemical protective clothing for use by DOE decontamination and decommissioning workers that is sufficiently water vapor permeable to keep the workers cool, thereby enhancing their productivity. This report describes the results of Phase II of a two-phase project to complete development of the novel permselective material and to test protective clothing made from the fabric. In Phase I a novel material incorporating a nonporous hydrophilic polyvinylacohol (PVA) layer, which is water vapor permeable but relatively impermeable to organic vapors, was developed. The results of the Phase I tests showed that the chemical resistance of the MTR material is comparable to that of Saranex/Tyvek materials, and that the comfort properties are closer to those of Tyvek (as measured in terms of CLO and permeability). Chemical resistance was measured using permeation tests against liquid dichloromethane. Comfort properties were ascertained by measuring the water vapor transmission of the material and by sweating manikin tests on whole protective suits. In addition, a cost/benefit analysis demonstrated that use of MTR's material technology could result in significant improvements in work productivity and cost savings if protective clothing items made from the new material were used more than once. In Phase II, MTR undertook a program to optimize the performance and production engineering for the new material technology. A partnership was formed with Kimberly-Clark Corporation to assist with a detailed evaluation of the MTR technology, and MTR used the services of Mr. Jeff Stull, President of the consulting firm International Personnel Protection, Inc., who conducted a detailed economic and application analysis for the developed fabric. The protective fabric manufacturing steps were simplified significantly, resulting in a 30% reduction in manufacturing costs and eliminating the necessity for capital investment in production equipment

  16. Fashion Evaluation Method for Clothing Recommendation Based on Weak Appearance Feature

    Directory of Open Access Journals (Sweden)

    Yan Zhang

    2017-01-01

    Full Text Available With the rapid rising of living standard, people gradually developed higher shopping enthusiasm and increasing demand for garment. Nowadays, an increasing number of people pursue fashion. However, facing too many types of garment, consumers need to try them on repeatedly, which is somewhat time- and energy-consuming. Besides, it is difficult for merchants to master the real-time demand of consumers. Herein, there is not enough cohesiveness between consumer information and merchants. Thus, a novel fashion evaluation method on the basis of the appearance weak feature is proposed in this paper. First of all, image database is established and three aspects of appearance weak feature are put forward to characterize the fashion level. Furthermore, the appearance weak features are extracted according to the characters’ facial feature localization method. Last but not least, consumers’ fashion level can be classified through support vector product, and the classification is verified with the hierarchical analysis method. The experimental results show that consumers’ fashion level can be accurately described based on the indexes of appearance weak feature and the approach has higher application value for the clothing recommendation system.

  17. Patient cloth with motion recognition sensors based on flexible piezoelectric materials.

    Science.gov (United States)

    Youngsu Cha; Kihyuk Nam; Doik Kim

    2017-07-01

    In this paper, we introduce a patient cloth for position monitoring using motion recognition sensors based on flexible piezoelectric materials. The motion recognition sensors are embedded in three parts, which are the knee, hip and back, in the patient cloth. We use polyvinylidene fluoride (PVDF) as the flexible piezoelectric material for the sensors. By using the piezoelectric effect of the PVDF, we detect electrical signals when the cloth is bent or extended. We analyze the sensing values for our human motions by processing the sensor outputs in a custom-made program. Specifically, we focus on the transitions between standing and sitting, and sitting knee extension and supine position, which are important motions for patient monitoring.

  18. Virtual corporations, enterprise and organisation

    Directory of Open Access Journals (Sweden)

    Carmen RÃDUT

    2009-06-01

    Full Text Available Virtual organisation is a strategic paradigm that is centred on the use of information and ICT to create value. Virtual organisation is presented as a metamanagement strategy that has application in all value oriented organisations. Within the concept of Virtual organisation, the business model is an ICT based construct that bridges and integrates enterprise strategic and operational concerns. Firms try to ameliorate the impacts of risk and product complexity by forming alliances and partnerships with others to spread the risk of new products and new ventures and to increase organisational competence. The result is a networked virtual organization.

  19. Playful mediation and virtual sociality

    Directory of Open Access Journals (Sweden)

    Sihem NAJJAR

    2010-01-01

    Full Text Available As a space of sociability, virtual games, especially online role playing games, allow us to capture the interest of the playfulness in social life, but they are means by which users are able to experiment their relationship to others. The virtual games as a mediation device, constitute a "pretext" to forge friendships, develop love relationships, improve language skills, discover other cultures, etc. Based on a sociological survey of Tunisian Internet users (both sexes fans of virtual games we try to show how playful mediation is producing a multifaceted virtual sociality inherent in our contemporary societies.

  20. Visual effects of the first ladies’ Kebaya clothing on the image of Indonesian women’s appearances

    Science.gov (United States)

    Suciati

    2016-04-01

    The image of Indonesian women on international level is partly influenced by the appearance of the First Lady. The role and position of the First Lady is the representation of Indonesian women, because basically the First Lady, as the wife who accompanies the President (head of state), has a strong background of cultural grip, high intellectuality and good personality in her daily lifestyle, including in wearing clothes, and as an ambassador of culture and design. Fashion style of the First Lady always draws praise and criticism from the public. The purpose of this study is to reveal the visualization effects of Indonesian First Ladies’ kebaya clothing style in various state occasions on the image of Indonesian women’s appearances. This study is a qualitative research of visual data that emphasizes the discussion of Kebaya Clothing using semiological study (connotation and denotation meaning) that bring out self-image. The results showed that the style the First Ladies’ Kebaya clothing in every presidency period of their husbands had characteristics both in the style of clothing or hairstyle, indicating self-image. The conclusion of this study reveals that the First Ladies’ Kebaya Clothing (National Clothing) is interpreted as having implied messages because clothing can be observed visually. Implication was done on the construction of learning patterns of clothing, national fashion design and Nusantara ethnic clothing design.

  1. ESD - FUNCTIONAL CLOTHING

    Directory of Open Access Journals (Sweden)

    SCARLAT Razvan

    2016-05-01

    Full Text Available The functional clothing represents a sustainable development direction of in the field of technical textiles, a bridge between various activity domains, a solution to user’s complex requirements. The research and development potential in the field is supported by the new fibers/ yarns generation, the new technologies and the market niches, as well. Protective clothing is now a major part of textile classified under technical textile. Protective clothing refers to the garment and other fabric related items designed to protect the wearer from harsh environmental effects that results in injuries or death. The innovation, as a result of convergence processing technologies, consumer demands and what is viable on the market, defines the personal protective equipment field. In this article, we present the work of an ESD protective clothing development. Therefore, it has been applied a modern knitting technology, on 7E and 12E STOLL machines, using cotton and wool yarns as base yarn and conductive yarns for plaiting structures. Also, the optimal parameters establishment and the functional requirements are aspects of the research activity performed. The experimental models have been conducted in order to demonstrate the design concept used and choosing the optimal variant. The characterization of the developed experimental variants took into account the evaluation of physico-mechanical and electrical characteristics. From the electrical point of view, the variants have been mainly evaluated through “point to point” method in terms of electrical isolation efficiency dimensional changes analysis.

  2. High methanol oxidation activity of electrocatalysts supported by directly grown nitrogen-containing carbon nanotubes on carbon cloth

    International Nuclear Information System (INIS)

    Wang, C.-H.; Shih, H.-C.; Tsai, Y.-T.; Du, H.-Y.; Chen, L.-C.; Chen, K.-H.

    2006-01-01

    The microstructure and electrochemical activity of the Pt-Ru supported by nitrogen-containing carbon nanotubes (CN x NTs) directly grown on the carbon cloth have been investigated. The CN x NTs directly grown on the carbon cloth (CN x NTs-carbon cloth composite electrode) were synthesized using microwave-plasma-enhanced chemical vapour deposition first and then use as the template to support the Pt-Ru nanoclusters subsequently sputtered on. The ferricyanide/ferrocyanide redox reaction in cyclic voltammetry (CV) measurements showed a faster electron transfer on the CN x NTs-carbon cloth composite electrode than the one with carbon cloth alone. Comparing their methanol oxidation abilities, it is found that the Pt-Ru nanoclusters supported by the CN x NTs-carbon cloth composite electrode have considerably higher electrocatalytic activity than the carbon cloth counterpart. This result suggests high performance of the CN x NTs-carbon cloth composite electrode, and demonstrates its suitability for direct methanol fuel cell applications

  3. High methanol oxidation activity of electrocatalysts supported by directly grown nitrogen-containing carbon nanotubes on carbon cloth

    Energy Technology Data Exchange (ETDEWEB)

    Wang, C.-H. [Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan (China); Shih, H.-C. [Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan (China); Institue of Materials Science and Nano Technology, Chinese Culture University, Taipei, Taiwan (China); Tsai, Y.-T. [Institue of Materials Science and Nano Technology, Chinese Culture University, Taipei, Taiwan (China); Du, H.-Y. [Institue of Materials Science and Nano Technology, Chinese Culture University, Taipei, Taiwan (China); Chen, L.-C. [Center for Condensed Matter Sciences, National Taiwan University, Taipei, Taiwan (China); Chen, K.-H. [Center for Condensed Matter Sciences, National Taiwan University, Taipei, Taiwan (China) and Institue of Atomic and Molecular Science, Academia Sinica, Taipei, Taiwan (China)]. E-mail: chenkh@pub.iams.sinica.edu.tw

    2006-12-01

    The microstructure and electrochemical activity of the Pt-Ru supported by nitrogen-containing carbon nanotubes (CN {sub x} NTs) directly grown on the carbon cloth have been investigated. The CN {sub x} NTs directly grown on the carbon cloth (CN {sub x} NTs-carbon cloth composite electrode) were synthesized using microwave-plasma-enhanced chemical vapour deposition first and then use as the template to support the Pt-Ru nanoclusters subsequently sputtered on. The ferricyanide/ferrocyanide redox reaction in cyclic voltammetry (CV) measurements showed a faster electron transfer on the CN {sub x} NTs-carbon cloth composite electrode than the one with carbon cloth alone. Comparing their methanol oxidation abilities, it is found that the Pt-Ru nanoclusters supported by the CN {sub x} NTs-carbon cloth composite electrode have considerably higher electrocatalytic activity than the carbon cloth counterpart. This result suggests high performance of the CN {sub x} NTs-carbon cloth composite electrode, and demonstrates its suitability for direct methanol fuel cell applications.

  4. Radiation protecting clothing materials

    International Nuclear Information System (INIS)

    Mio, Kotaro; Ijiri, Yasuo.

    1986-01-01

    Purpose: To provide radiation protecting clothing materials excellent in mechanical strength, corrosion resistance, flexibility and flexing strength. Constitution: The radiation protecting clothing materials according to this invention has pure lead sheets comprising a thin pure lead foil of 50 to 150 μm and radiation resistant organic materials, for example, polyethylene with high neutron shielding effect disposed to one or both surfaces thereof. The material are excellent in the repeating bending fatigue and mechanical strength, corrosion resistance and flexibility and, accordingly, radiation protecting clothings prepared by using them along or laminating them also possess these excellent characteristics. Further, they are excellent in the handlability, particularly, durability to the repeated holding and extension, as well as are preferable in the physical movability and feeling upon putting. The clothing materials may be cut into an appropriate size, or stitched into clothings made by radiation-resistant materials. In this case, pure lead sheets are used in lamination. (Horiuchi, T.)

  5. Clothing style preference of working women related to self- image/clothing-image congruity and public self-consciousness

    OpenAIRE

    Park, Jae Ok

    1990-01-01

    The purpose of the study was to extend knowledge concerning the influence of self-image congruity and public self-consciousness on clothing behavior from the symbolic consumption perspective. Thus, relationships among the three major constructs, public self-consciousness (PSC), self-image/clothing-image congruity (actual self-congruity, ASC and ideal social-congruity, ISSC) and clothing-style preference (CSP), were examined. The five objectives that guided the study were ...

  6. High-performance all-solid-state flexible supercapacitors based on two-step activated carbon cloth

    Science.gov (United States)

    Jiang, Shulan; Shi, Tielin; Zhan, Xiaobin; Long, Hu; Xi, Shuang; Hu, Hao; Tang, Zirong

    2014-12-01

    A simple and effective strategy is proposed to activate carbon cloth for the fabrication of flexible and high-performance supercapacitors. Firstly, the carbon cloth surface is exfoliated as nanotextures through wet chemical treatment, then an annealing process is applied at H2/N2 atmosphere to reduce the surface oxygen functional groups which are mainly introduced from the first step. The activated carbon cloth electrode shows excellent wettablity, large surface area and delivers remarkable electrochemical performance. A maximum areal capacitance of 485.64 mF cm-2 at the current density of 2 mA cm-2 is achieved for the activated carbon cloth electrode, which is considerably larger than the resported results for carbon cloth. Furthermore, the flexible all-solid-state supercapacitor, which is fabricated based on the activated carbon cloth electrodes, shows high areal capacitance, superior cycling stability as well as stable electrochemical performance even under constant bending or twisting conditions. An areal capacitance of 161.28 mF cm-2 is achieved at the current density of 12.5 mA cm-2, and 104% of its initial capacitance is retained after 30,000 charging/discharging cycles. This study would also provide an effective way to boost devices' electrochemical performance by accommodating other active materials on the activated carbon cloth.

  7. The Virtual Shopping Experience: using virtual presence to motivate online shopping

    OpenAIRE

    Carolyn Chin; Paula Swatman; Paula Swatman

    2005-01-01

    Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is nee...

  8. Crew Clothing Odor Absorbing Stowage Bag

    Data.gov (United States)

    National Aeronautics and Space Administration — Clothing accounts for a significant portion of the logistical mass launched on current space missions: 277 kg (including 62 kg of exercise clothing) for an ISS crew...

  9. Dry and wet heat transfer through clothing dependent on the clothing properties under cold conditions

    NARCIS (Netherlands)

    Richards, M.G.M.; Rossi, R.; Meinander, H.; Broede, P.; Candas, V.; Hartog, E.A. den; Holmér, I.; Nocker, W.; Havenith, G.

    2008-01-01

    The purpose of this study was to investigate the effect of moisture on the heat transfer through clothing in relation to the water vapour resistance, type of underwear, location of the moisture and climate. This forms part of the work performed for work package 2 of the European Union THERMPROTECT

  10. Radioactive contamination incidents involving protective clothing

    Energy Technology Data Exchange (ETDEWEB)

    Reichelt, R.; Clay, M.; Eichorst, J.

    1996-10-01

    The study focuses on incidents at Department of Energy (DOE) facilities involving the migration of radioactive contaminants through protective clothing. The authors analyzed 68 occurrence reports for the following factors: (1) type of work; (2) working conditions; (3) type of anti-contamination (anti-C) material; (4) area of body or clothing contaminated; and (5) nature of spread of contamination. A majority of reports identified strenuous work activities such as maintenance, construction, or decontamination and decommissioning (D&D) projects. The reports also indicated adverse working conditions that included hot and humid or cramped work environments. The type of anti-C clothing most often identified was cotton or water-resistant, disposable clothing. Most of the reports also indicated contaminants migrating through perspiration-soaked areas, typically in the knees and forearms. On the basis of their survey, the authors recommend the use of improved engineering controls and resilient, breathable, waterproof protective clothing for work in hot, humid, or damp areas where the possibility of prolonged contact with contamination cannot be easily avoided or controlled.

  11. Radioactive contamination incidents involving protective clothing

    International Nuclear Information System (INIS)

    Reichelt, R.; Clay, M.; Eichorst, J.

    1996-10-01

    The study focuses on incidents at Department of Energy (DOE) facilities involving the migration of radioactive contaminants through protective clothing. The authors analyzed 68 occurrence reports for the following factors: (1) type of work; (2) working conditions; (3) type of anti-contamination (anti-C) material; (4) area of body or clothing contaminated; and (5) nature of spread of contamination. A majority of reports identified strenuous work activities such as maintenance, construction, or decontamination and decommissioning (D ampersand D) projects. The reports also indicated adverse working conditions that included hot and humid or cramped work environments. The type of anti-C clothing most often identified was cotton or water-resistant, disposable clothing. Most of the reports also indicated contaminants migrating through perspiration-soaked areas, typically in the knees and forearms. On the basis of their survey, the authors recommend the use of improved engineering controls and resilient, breathable, waterproof protective clothing for work in hot, humid, or damp areas where the possibility of prolonged contact with contamination cannot be easily avoided or controlled

  12. Radioactive contamination incidents involving protective clothing

    International Nuclear Information System (INIS)

    Reichelt, R.A.; Clay, M.E.; Eichorst, A.J.

    1998-01-01

    The study focuses on incidents at Department of Energy facilities involving the migration of radioactive contaminants through protective clothing. The authors analyzed 68 occurrence reports for the following factors: (1) type of work, (2) working conditions, (3) type of anti-contamination material; (4) area of body or clothing contaminated; and (5) nature of spread of contamination. A majority of reports identified strenuous work activities such as maintenance, construction, or decontamination and decommissioning projects. The reports also indicated adverse working conditions that included hot and humid or cramped work environments. The type of anti-contamination clothing most often identified was cotton or water-resistant disposable clothing. Most of the reports also indicated contaminants migrating through perspiration-soaked areas, typically in the knees and forearms. On the basis of their survey, the authors recommend the use of improved engineering controls and resilient, breathable, waterproof protective clothing for work in hot, humid, or damp areas where the possibility of prolonged contact with contamination cannot be easily avoided or controlled. 1 ref., 6 figs., 1 tab

  13. Jenna Ng (ed., Understanding Machinima. Essays on Filmmaking in Virtual Worlds

    Directory of Open Access Journals (Sweden)

    Vincenzo Idone Cassone

    2015-09-01

    Full Text Available Understanding Machinima. Essays on Filmmaking in Virtual Worlds (Bloomsbury 2013, edited by Jenna Ng is an intriguing incursion into the world of machinima from a Media Studies point-of-view, trying to address the topic beyond game’s environment, in connection with the evolution of the contemporary mediascape.

  14. Research on human physiological parameters intelligent clothing based on distributed Fiber Bragg Grating

    Science.gov (United States)

    Miao, Changyun; Shi, Boya; Li, Hongqiang

    2008-12-01

    A human physiological parameters intelligent clothing is researched with FBG sensor technology. In this paper, the principles and methods of measuring human physiological parameters including body temperature and heart rate in intelligent clothing with distributed FBG are studied, the mathematical models of human physiological parameters measurement are built; the processing method of body temperature and heart rate detection signals is presented; human physiological parameters detection module is designed, the interference signals are filtered out, and the measurement accuracy is improved; the integration of the intelligent clothing is given. The intelligent clothing can implement real-time measurement, processing, storage and output of body temperature and heart rate. It has accurate measurement, portability, low cost, real-time monitoring, and other advantages. The intelligent clothing can realize the non-contact monitoring between doctors and patients, timely find the diseases such as cancer and infectious diseases, and make patients get timely treatment. It has great significance and value for ensuring the health of the elders and the children with language dysfunction.

  15. The effect of gamma radiation on the properties of activated carbon cloth

    Directory of Open Access Journals (Sweden)

    DANIJELA R. SEKULIĆ

    2009-09-01

    Full Text Available Activated carbon cloth dressing is an appropriate wound healing material due to its biocompatibility and adsorption characteristics. The in-fluence of gamma radiation as a sterilization process on the adsorption and mechanical properties of activated carbon cloth was investigated. The specific surface area, micropore volume, pore size distribution, surface chemistry as well as the breaking load of activated carbon cloth before and after gamma radiation were examined. Characterization by nitrogen adsorption showed that the activated carbon cloth was a microporous material with a high specific surface area and micropores smaller than 1 nm. Gamma radiation decreased the specific surface area and micropore volume but increased the pore width. The sterilization process changed the surface chemistry quantitatively, but not qualitatively. In addition, the breaking load decreased but without any influence considering the further application of this material.

  16. Heat transfer from humans wearing clothing

    NARCIS (Netherlands)

    Lotens, W.A.

    1993-01-01

    In this monograph the effects of clothing on human heat transfer are described. The description is based on the physics of heat and mass transfer, depending on the design of the clothing, the climate, and the activity of the wearer. The resulting model has been stepwise implemented in computer

  17. 76 FR 70883 - Clothing Allowance

    Science.gov (United States)

    2011-11-16

    ... prescription skin cream for the ``face, neck, hands, arms, or any area not covered by clothing may come into... the clothing or outergarment due to a second appliance or medication.'' This language will clarify that a second clothing allowance may be paid when a second appliance and/or medication increases the...

  18. Review Essay : Virtually Alive or Questionably Dead? The Ambivalence of Modern Korean Identity in Literature and Cinema

    OpenAIRE

    Kim, Kyu Hyun

    2012-01-01

    Theodore Hughes, Literature and Film in Cold War South Korea: Freedom's Frontier. New York: Columbia University Press, 2012. 304 pp. $55 (cloth).Kyung Hyun Kim, Virtual Hallyu: Korean Cinema of the Global Era. Durham, NC: Duke University Press, 2011, pp. 208. $90 (cloth), $25 (paper).The studies by Kyung Hyun Kim and Theodore Hughes discussed in this essay are rich with information and insights but are also challenging, almost subversive, to some prevalent views on Korean cinema and literatur...

  19. The influence of virtual presence: Effects on experienced cognitive load and learning outcomes in educational computer games

    NARCIS (Netherlands)

    Schrader, Claudia; Bastiaens, Theo

    2018-01-01

    Does the immersive design of an educational gaming environment affect learners’ virtual presence and how much do they learn? Does virtual presence affect learning? This study tries to answer these ques- tions by examining the differences in virtual presence and learning outcomes in two different

  20. Morphological and electrochemical properties of boron-doped diamond films on carbon cloths with enhanced surface area

    International Nuclear Information System (INIS)

    Silva, L.L.G.; Ferreira, N.G.; Corat, E.J.

    2008-01-01

    The electrochemical properties of doped diamond electrodes (10 17 -10 19 B cm -3 ) grown on carbon fiber cloths in H 2 SO 4 0.1 mol L -1 electrolyte were investigated. Cyclic voltammograms of B-doped diamond/carbon fiber cloth and carbon fiber cloth electrodes showed that both kinds of electrodes possess similar working potential windows of about 2.0 V. The electrode capacitance was determined by impedance spectroscopy and chronopotentiometry measurements and very close values were obtained. The capacitance values of the diamond film on carbon fiber cloths were 180 times higher than the ones of diamond films on Si. In this paper we have also discussed the capacitance frequency dependence of diamond/carbon cloth electrodes

  1. Interpretation of clothing heritage for contemporary tourism

    Science.gov (United States)

    Vilman Proje, J.; Bizjak, M.

    2017-10-01

    In tourism is the first impression of essential meaning as tourists falling by what they see. In designing the clothing image, for commercial use in tourist sector, should be considered that clothes are consistent with the clothing habits of the region and that comply with the heritage story and style of the geographical area. Clothing image of the tourism representatives of the Bohinj region (Slovenia) has been developed. When designing, the inspiration was sought in historical and contemporary clothing image and heritage stories, in elements that representatives of the community recognize as their own cultural heritage. Affiliated clothes for tourism employees should have a useful function of comfortable workwear with heritage expression, meaning clothes are to be accepted as “everyday” clothes and not as a costume.

  2. Present Situation and Future Development Trend of Smart Clothing

    Directory of Open Access Journals (Sweden)

    Ju Fengfan

    2017-09-01

    Full Text Available With the rapid development of science and technology, our daily clothes are changing quietly. Wearable smart clothing has gradually the leading role in the clothing market. This article first explains the concept of wearable intelligent clothing in china, and then I analyze the various types of wearable smart clothing that is currently facing problems, and summarized about the key points and future directions of wearable intelligent clothing design. From the beginning of 2013, smart watches, bracelets, glasses have entered the public vision, become a "trendsetter who sought the object", this year the industry was identified as "the first year of wearable equipment". In simple terms, a wearable device is a portable device that can be worn directly on the body, or integrated into the user's clothing or accessories. However, with the development of wireless sensor technology, kinds of wearable smart clothing gradually appeared in people's life, the smart clothing is made up of small chip, electronic components, power equipment, embedded into clothing, can achieve a specific function, in order to facilitate people's life.

  3. HCRS: A hybrid clothes recommender system based on user ratings and product features

    OpenAIRE

    Hu, Xiaosong; Zhu, Wen; Li, Qing

    2014-01-01

    Nowadays, online clothes-selling business has become popular and extremely attractive because of its convenience and cheap-and-fine price. Good examples of these successful Web sites include Yintai.com, Vancl.com and Shop.vipshop.com which provide thousands of clothes for online shoppers. The challenge for online shoppers lies on how to find a good product from lots of options. In this article, we propose a collaborative clothes recommender for easy shopping. One of the unique features of thi...

  4. The influence of an online virtual situated environment on a Chinese learning community

    Directory of Open Access Journals (Sweden)

    Kuo-En Chang

    2012-03-01

    Full Text Available This study used an online virtual environment to create and develop a Chinese learning community. The purposes of research were (1 to enhance the Chinese learners’ oral Chinese communication skills and (2 to change the community members’ Chinese speaking and teaching behavior. This is an action research. The research tried to create a community in a virtual environment. The research results showed that (1 a virtual community can enhance learner’s Chinese competence, and (2 future Chinese teachers’ instructional and leading skills can be developed in a virtual community situation.

  5. War-Fighting in the Early 21st Century: A Remote-Controlled, Robotic, Robust, Size-Reduced, Virtual-Reality Paradigm

    Science.gov (United States)

    2006-11-27

    39 40 41 Miniaturization: another exponential trend 42 43 Planetary Gear 44 Nanosystems bearing 45 Nanosystems smaller bearing 46 Respirocyte (an...clothing, our eyeglasses • Full immersion visual-auditory virtual reality • Augmented real reality • Interaction with virtual personalities as a primary

  6. Making Complex Electrically Conductive Patterns on Cloth

    Science.gov (United States)

    Chu, Andrew; Fink, Patrick W.; Dobbins, Justin A.; Lin, Greg Y.; Scully, Robert C.; Trevino, Robert

    2008-01-01

    A method for automated fabrication of flexible, electrically conductive patterns on cloth substrates has been demonstrated. Products developed using this method, or related prior methods, are instances of a technology known as 'e-textiles,' in which electrically conductive patterns ar formed in, and on, textiles. For many applications, including high-speed digital circuits, antennas, and radio frequency (RF) circuits, an e-textile method should be capable of providing high surface conductivity, tight tolerances for control of characteristic impedances, and geometrically complex conductive patterns. Unlike prior methods, the present method satisfies all three of these criteria. Typical patterns can include such circuit structures as RF transmission lines, antennas, filters, and other conductive patterns equivalent to those of conventional printed circuits. The present method overcomes the limitations of the prior methods for forming the equivalent of printed circuits on cloth. A typical fabrication process according to the present method involves selecting the appropriate conductive and non-conductive fabric layers to build the e-textile circuit. The present method uses commercially available woven conductive cloth with established surface conductivity specifications. Dielectric constant, loss tangent, and thickness are some of the parameters to be considered for the non-conductive fabric layers. The circuit design of the conductive woven fabric is secured onto a non-conductive fabric layer using sewing, embroidery, and/or adhesive means. The portion of the conductive fabric that is not part of the circuit is next cut from the desired circuit using an automated machine such as a printed-circuit-board milling machine or a laser cutting machine. Fiducials can be used to align the circuit and the cutting machine. Multilayer circuits can be built starting with the inner layer and using conductive thread to make electrical connections between layers.

  7. Clothing Preferences of Older Women: Implications for Gerontology and the American Clothing Industry.

    Science.gov (United States)

    Spruiell, Phyllis R.; Jernigan, Marian

    1982-01-01

    Investigated the clothing preferences and problems of older women, using personal interviews. Presents results of preferred styles in detail. Discusses implications of the research for gerontologists in higher education and for the American clothing industry. (RC)

  8. Virtual Construction of Social Reality Through New Medium-Internet

    OpenAIRE

    KARASAR, Sahin

    2002-01-01

    This is a study on the creation of social reality in virtual setting such as chat/discussion/list groups, based on a theoretical framework of social and cultural reality. It was tried to be found how closer one can get to and create the reality in relation with others in virtual settings. It is a survey type study. For this, a virtually communicated group (45 persons) was selected and given a questionnaire in their natural virtual settings. The members were questioned on their socializatio...

  9. Folding System for the Clothes by a Robot and Tools

    OpenAIRE

    大澤, 文明; 関, 啓明; 神谷, 好承

    2004-01-01

    The works of a home robot has the laundering. The purpose of this study is to find a means of folding of the clothes and store the clothes in a drawer by a home robot. Because the shape of cloth tends to change in various ways depending on the situation, it is difficult for robot hands to fold the clothes. In this paper, we propose a realistic folding system for the clothes by a robot and tools. The function of a tool is folding the clothes in half by inserting the clothes using two plates. T...

  10. Development of X-ray protective clothes for medical treatments

    International Nuclear Information System (INIS)

    Nagai, M.; Koike, K.; Fujinuma, T.; Aso, T.; Konba, T.

    1991-01-01

    As various medical treatments using X-ray irradiation are getting more important in modern medicine, effective, excellent X-ray protective clothes have been required. Elastomeric or PVC sheets containing powdery lead are usually employed as conventional X-ray protective clothes. In this case, enhancement of X-ray shielding efficiency increases the weight because the efficiency depends on the amount of lead incorporated. Such heavy clothes give significant fatigue and inconvenience during long term use. Consequently, lightweight and comfortable X-ray protective clothes have been eagerly desired in the medical field. The authors have improved these defects in the conventional clothes by means of elastomeric blending technologies and successfully developed new, lightweight and comfortable X-ray shielding clothes. The new clothes consist of lead-containing rubber sheet in which lead is homogeneously incorporated and lightweight PVC laminated with fabrics. They achieved favorable sense of touch, comfortable wearing and long-term durability. Furthermore, the clothes satisfy all requirements including X-ray shielding efficiency defined in JIS specifications. This article introduces the development of the new clothes and their properties in detail. (author)

  11. Marketing Strategies in the Clothing Industry

    Institute of Scientific and Technical Information of China (English)

    雷丽娜

    2011-01-01

    Chinese clothing industry has stepped into a new era when the fierce competition,the internationalization and the pluralism coexist.If the clothing enterprises want to catch the market opportunities,and stand out in the clothing industry,they should chang

  12. Clothing creator trademark : Business plan

    Energy Technology Data Exchange (ETDEWEB)

    Stern, B.

    1990-10-01

    SYMAGERY has developed a patented process to manufacture clothing without direct human labor. This CLOTHING CREATOR{trademark}, will have the ability to produce two (2) perfect garments every 45 seconds or one (1) every 30 seconds. The process will combine Computer Integrated Manufacturing (CIM) technology with heat molding and ultrasonic bonding/cutting techniques. This system for garment production, will have the capacity to produce garments of higher quality and at lower productions costs than convention cut and sew methods. ADVANTAGES of the process include: greatly reduced production costs; increased quality of garments; reduction in lead time; and capacity to make new class of garments. This technology will accommodate a variety of knit, woven and nonwoven materials containing a majority of synthetic fibers. Among the many style of garments that could be manufactured by this process are: work clothing, career apparel, athletic garments, medical disposables, health care products, activewear, haz/mat garments, military clothing, cleanroom clothing, outdoor wear, upholstery, and highly contoured stuffed toy shells. 3 refs.

  13. Relationship intention amongst clothing retail customers: An exploratory study

    Directory of Open Access Journals (Sweden)

    Stefanie W. Kuhn

    2015-08-01

    Full Text Available Orientation: Increasing competition has resulted in clothing retailers placing more emphasis on expensive relationship marketing tactics to retain customers. The retailers often use customers’ loyalty programme membership and the duration of their support to identify and target them in relationship-building efforts. Research purpose: This study determines the viability of relationship intention by measuring and categorising clothing customers according to their relationship intentions. The study also explores the duration of customer support for a clothing retailer, membership of their loyalty programme and the relationship thereof with customers’ relationship intentions towards that retailer. Motivation for the study: Relationship building efforts would be better directed at customers with relationship intentions. Research design, approach and method: Quantitative in nature, this study followed a descriptive research design and used an interviewer-administered survey to collect data from 511 clothing retail customers residing in the greater Pretoria metropolitan area. Main findings: Clothing retailers can effectively determine and categorise customers according to their relationship intentions. The duration customers have supported a clothing retailer and its loyalty programme has no relationship with their relationship intentions. Practical/Managerial implications: Clothing retailers should focus their relationship building on customers with relationship intentions, as they are more likely to respond favourably. They are more likely to be retained by the clothing retailer and provide a return on investment. Contribution/value-add: This study gives clothing retailers a reliable and valid measuring instrument that can be used to identify customers with relationship intentions, rather than relying on the duration of the customers’ support and their loyalty programme membership.

  14. Making the optimal decision in selecting protective clothing

    International Nuclear Information System (INIS)

    Price, J. Mark

    2007-01-01

    Protective Clothing plays a major role in the decommissioning and operation of nuclear facilities. Literally thousands of employee dress-outs occur over the life of a decommissioning project and during outages at operational plants. In order to make the optimal decision on which type of protective clothing is best suited for the decommissioning or maintenance and repair work on radioactive systems, a number of interrelating factors must be considered, including - Protection; - Personnel Contamination; - Cost; - Radwaste; - Comfort; - Convenience; - Logistics/Rad Material Considerations; - Reject Rate of Laundered Clothing; - Durability; - Security; - Personnel Safety including Heat Stress; - Disposition of Gloves and Booties. In addition, over the last several years there has been a trend of nuclear power plants either running trials or switching to Single Use Protective Clothing (SUPC) from traditional protective clothing. In some cases, after trial usage of SUPC, plants have chosen not to switch. In other cases after switching to SUPC for a period of time, some plants have chosen to switch back to laundering. Based on these observations, this paper reviews the 'real' drivers, issues, and interrelating factors regarding the selection and use of protective clothing throughout the nuclear industry. (authors)

  15. Technical and Sociological Approaches for Curriculum Innovation on Clothing Education Department

    Science.gov (United States)

    Tristantie, N.

    2018-02-01

    Education in the context of social and technical development is defined as the main factor in the learning process which is implied into curriculum. It needs to be anticipated responsively how the goals of Clothing Education Department should be achieved. The sociological and technological through curriculum innovation at Clothing Education Department aims to gain good profile of the professional graduates in the future. By using the literature study, it is found out that sociological development and technological approach are the main foundation for sustainability of Clothing Education Department.

  16. The effect of air permeability of chemical protective clothing material on clothing vapour resistance

    NARCIS (Netherlands)

    Havenith, G.; Vuister, R.; Wammes, L.

    1996-01-01

    One of the major problems associated with Chemical Warfare Protective Clothing (CW) is the additional heat load created by the garments. For CW-overgarments, research in the direction of reducing material thickness and thus heat and vapour resistance have not resulted in major improvements. The

  17. Competitive situation of clothing and textile industry

    OpenAIRE

    Jansevičiūtė, Daina

    2010-01-01

    This paper is up for discussing the composed competitive situation of Lithuanian clothing and textile industry. Author concisely proposes aspects of competitive ability conception, explores the main statistical information illustrating importance of clothing and textile industry in all manufacturing and economics. Willing to accomplish a statistical data analysis of trade clothing and textile industry competitors and advantages which they have and which influence Lithuanian clothing and texti...

  18. Valuation of cloths for decontamination by wiping

    International Nuclear Information System (INIS)

    Rankin, W.N.; Reif, D.J.; Fink, S.D.; Luckenbach, R.L.

    1990-01-01

    Treated polyester cloth was evaluated in laboratory-scale and larger-scale tests as an alternative to atomic wipes and cotton cloth for use in decontamination by wiping. The advantages of the treated polyester are as follows: Does not react with nitric acid to form unstable product, More fire resistant, Less volume of radioactive waste generated (versus atomic wipes), and Product can be recovered by soaking the polyester cloths in nitric acid. Results are that even though treated polyester wiping cloths are slightly less effective than atomic wipes and cotton cloth, its many other benefits greatly outweigh this slight disadvantage. 1 ref., 5 figs

  19. The Relationship between Physical Activity and Thermal Protective Clothing on Functional Balance in Firefighters

    Science.gov (United States)

    Kong, Pui W.; Suyama, Joe; Cham, Rakie; Hostler, David

    2012-01-01

    We investigated the relationship between baseline physical training and the use of firefighting thermal protective clothing (TPC) with breathing apparatus on functional balance. Twenty-three male firefighters performed a functional balance test under four gear/clothing conditions. Participants were divided into groups by physical training status,…

  20. The Framework of Tunisian Textile and Clothing Industry

    OpenAIRE

    Kahia, Montassar

    2017-01-01

    In this paper, we will first present the textile and the clothing sector in the Tunisian economy. It is therefore very important to situate this sector in our economy, evaluating its various features and outline its strengths and weaknesses. We also focus on the historical evolution of Tunisian textile and clothing sector. We will establish then a comparison between Tunisia and China as part of the textile and clothing industry.

  1. 28 CFR 571.22 - Release clothing and transportation.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Release clothing and transportation. 571... AND RELEASE RELEASE FROM CUSTODY Release Gratuities, Transportation, and Clothing § 571.22 Release clothing and transportation. (a) Staff shall provide release clothing appropriate for the time of year and...

  2. Analysis of Traditional Historical Clothing

    DEFF Research Database (Denmark)

    Jensen, Karsten; Schmidt, A. L.; Petersen, A. H.

    2013-01-01

    for establishing a three-dimensional model and the corresponding two-dimensional pattern for items of skin clothing that are not flat. The new method is non-destructive, and also accurate and fast. Furthermore, this paper presents an overview of the more traditional methods of pattern documentation and measurement......A recurrent problem for scholars who investigate traditional and historical clothing is the measuring of items of clothing and subsequent pattern construction. The challenge is to produce exact data without damaging the item. The main focus of this paper is to present a new procedure...

  3. Textiles and clothing sustainability sustainable technologies

    CERN Document Server

    2017-01-01

    This is the first book to deal with the innovative technologies in the field of textiles and clothing sustainability. It details a number of sustainable and innovative technologies and highlights their implications in the clothing sector. There are currently various measures to achieve sustainability in the textiles and the clothing industry, including innovations in the manufacturing stage, which is the crux of this book.

  4. Removal of target odorous molecules on to activated carbon cloths.

    Science.gov (United States)

    Le Leuch, L M; Subrenat, A; Le Cloirec, P

    2004-01-01

    Activated carbon materials are adsorbents whose physico-chemical properties are interesting for the treatment of odorous compounds like hydrogen sulfide. Indeed, their structural parameters (pore structure) and surface chemistry (presence of heteroatoms such as oxygen, hydrogen, nitrogen, sulfur, phosphorus) play an important role in H2S removal. The cloth texture of these adsorbents (activated carbon cloths) is particularly adapted for dealing with high flows, often found in the treatment of odor emissions. Thus, this paper first presents the influence of these parameters through adsorption isothermal curves performed on several materials. Secondly, tests in a dynamic system are described. They highlight the low critical thickness of the fabric compared to granular activated carbon.

  5. Effects of body-mapping-designed clothing on heat stress and running performance in a hot environment.

    Science.gov (United States)

    Jiao, Jiao; Li, Yi; Yao, Lei; Chen, Yajun; Guo, Yueping; Wong, Stephen H S; Ng, Frency S F; Hu, Junyan

    2017-10-01

    To investigate clothing-induced differences in human thermal response and running performance, eight male athletes participated in a repeated-measure study by wearing three sets of clothing (CloA, CloB, and CloC). CloA and CloB were body-mapping-designed with 11% and 7% increased capacity of heat dissipation respectively than CloC, the commonly used running clothing. The experiments were conducted by using steady-state running followed by an all-out performance running in a controlled hot environment. Participants' thermal responses such as core temperature (T c ), mean skin temperature ([Formula: see text]), heat storage (S), and the performance running time were measured. CloA resulted in shorter performance time than CloC (323.1 ± 10.4 s vs. 353.6 ± 13.2 s, p = 0.01), and induced the lowest [Formula: see text], smallest ΔT c , and smallest S in the resting and running phases. This study indicated that clothing made with different heat dissipation capacities affects athlete thermal responses and running performance in a hot environment. Practitioner Summary: A protocol that simulated the real situation in running competitions was used to investigate the effects of body-mapping-designed clothing on athletes' thermal responses and running performance. The findings confirmed the effects of optimised clothing with body-mapping design and advanced fabrics, and ensured the practical advantage of developed clothing on exercise performance.

  6. Individual 3D measurements of end users to personalize work wear clothing

    Science.gov (United States)

    Mielicka, E.; Napieralska, L.; Jasińska, I.; Jarzyna, V.

    2017-10-01

    Body silhouette 3D measurements need to be performed separately in each country due to significant ethnic differences in body silhouette which preclude the transfer of European data to particular countries. Systematic research allows to update information on the population body silhouette and body proportions as well as select the size changes possible to implement in clothing construction modifications. The diversity in body silhouettes and sizes as well as the issue of clothing fitting encourage clothing producers to provide work wear clothing based on individual measurements of the end users’ bodies. In the framework of the carried research, the group of construction workers was selected as the target group of the analysed work wear clothing users. 42 construction workers, men only, were measured. The body silhouette measurement process was non-contact and was carried out with the use of 3D body scanner. The collected data on the body silhouette allowed to select sizes used to construct the work wear clothing and identify the clothing size. The selected measurement points of the body silhouette underwent statistical analysis to determine the distribution of random variables, here body sizes. The variables distribution characteristics were calculated. On that basis, the fitting appraisal of work wear clothing with respect to the size of the finished product corresponding to the adequate size of individually measured worker/end user was performed. The size overview of the work wear clothing used by the specific professional group and the appraisal of the size fitting to the body silhouette took into consideration the work wear clothing ergonomic functionality with respect to the body posture when performing the tasks, design and clothing construction. The analysis based on the currently gathered end users’ remarks and objections concerning the clothing fitting and performed body silhouette measurements allows to modify the existing work wear clothing for the

  7. Small-angle neutron scattering study of activated carbon cloth and ammonium persulfate-modified activated carbon cloth: Effect of oxygen content

    International Nuclear Information System (INIS)

    Pendleton, Phillip; Chen Lin

    2006-01-01

    Small-angle neutron scattering (SANS) patterns of as-received, oxidized, and thermally reduced FM1/250 activated carbon cloth (ACC) samples are compared to determine the effects of surface chemistry on scattering. Porosity analyses show minimal effect on pore size distribution from oxidation, but an increase in micropore volume on heat treatment. SANS suggests an increase in localized order within the treated samples when compared with graphite cloth patterns. The ACC exhibits Porod scattering at q-ranges -1 ; the graphite cloth exhibits the same at q-ranges>1.0 nm -1 . A cylindrical model reproduces the scattering patterns in the micropore equivalent dimensions, q>0.5 nm -1

  8. Determination of clothing microclimate volume

    NARCIS (Netherlands)

    Daanen, Hein; Hatcher, Kent; Havenith, George

    2005-01-01

    The average air layer thickness between human skin and clothing is an important factor in heat transfer. The trapped volume between skin and clothing is an estimator for everage air layer thickness. Several techniques are available to determine trapped volume. This study investigates the reliability

  9. EPRI Guide to Managing Nuclear Utility Protective Clothing Programs

    International Nuclear Information System (INIS)

    Kelly, J.J.; Kelly, D.M.

    1993-10-01

    The Electric Power Research Institute (EPRI) commissioned a radioactive waste related project (RP2414-34) in 1989 to produce a guide for developing and managing nuclear plant protective clothing programs. Every nuclear facility must coordinate some type of protective clothing program for its radiation workers to ensure proper and safe protection for the wearer and to maintain control over the spread of contamination. Yet, every nuclear facility has developed its own unique program for managing such clothing. Accordingly, a need existed for a reference guide to assist with standardizing protective clothing programs and in controlling the potentially escalating economics of such programs. The initial Guide to Managing Nuclear Utility Protective Clothing Programs, NP-7309, was published in May 1991. Since that time, a number of utilities have reviewed and/or used the report to enhance their protective clothing programs. Some of these utilities requested that a computer program be developed to assist utilities in evaluating the economics of protective clothing programs consistent with the guidance in NP-7309. The PCEVAL computer code responds to that industry need. This report, the PCEVAL User's Manual, provides detailed instruction on use of the software

  10. On the Effect of Thermophysical Properties of Clothing on the Heat Strain Predicted by PHS Model.

    Science.gov (United States)

    d'Ambrosio Alfano, Francesca Romana; Palella, Boris Igor; Riccio, Giuseppe; Malchaire, Jacques

    2016-03-01

    Procedures and equations reported in ISO 9920 for the correction of basic thermophysical clothing properties taking into account pumping effect and air movement are very different from those used by the Predicted Heat Strain (PHS) model in ISO 7933. To study the effect of these differences on the assessment of hot environments using the PHS model, an analysis focusing on the modelling of the dynamic thermal insulation and the vapour resistance of the clothing reported in ISO 9920 and ISO 7933 standards will be discussed in this paper. The results are useful evidence to start a discussion on the best practice for dealing with clothing thermophysical properties and underline the need to harmonize the entire set of standards in the field of the Ergonomics of the Thermal Environment. ISO 7933 is presently under revision. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  11. The Virtual Shopping Experience: using virtual presence to motivate online shopping

    Directory of Open Access Journals (Sweden)

    Carolyn Chin

    2005-11-01

    Full Text Available Online shopping has thus far tended to be a niche business – highly successful in selling digital products such as shares, software and, increasingly, music and films, it has been less successful in persuading the purchasers of ‘traditional’ goods such as cars, clothes, toiletries, or household appliances to forsake their physical retailers and move into cyberspace. In this wide-ranging review paper we investigate the issue of the virtual experience – endeavouring to understand what is needed for a successful ‘shopping experience’ online and what the possible obstacles or pitfalls along the way might be. We initially introduce the concepts of virtual presence (the sense of ‘being there’ and virtual reality, discussing the possible roles both can play in providing a solution to the problem of effective online shopping. We then consider the Experience Economy, a concept which encapsulates many of the issues related to the problem of online shopping and which suggests ways in which online retailers can enhance the effectiveness of their sites by means of a virtual ‘experience’. Having set the scene for online shopping, we discuss eTailing today in terms of direct product experience and the opportunities which cyber-shopping offers to replicate this process. Finally, we identify some of the possibilities and problems of online shopping today, illustrating the current status of virtual presence in retailing with two micro-cases of success and failure.

  12. Protective clothing

    International Nuclear Information System (INIS)

    Malet, J.C.; Regnier, J.

    1979-01-01

    The present operational and intervention suits are described. Research work is currently in progress to improve the performance of the existing suits and to develop more resistant protective clothing. (author)

  13. People's clothing behaviour according to external weather and indoor environment

    DEFF Research Database (Denmark)

    De Carli, M.; Olesen, Bjarne W.; Zarrella, A.

    2007-01-01

    In prehistoric times man wore furs of animals to protect himself from the cold. Successively over the centuries clothing has become also a tool to distinguish ourselves in society. Clothing has in addition an important impact on people's perception of the indoor environment. Clothing behaviour ha...

  14. Radiation protective clothing

    International Nuclear Information System (INIS)

    Ijiri, Yasuo; Fujinuma, Tadashi; Aso, Tsutomu.

    1991-01-01

    The present invention concerns radiation protective clothings suitable for medical protective clothings, aprons, etc. A primary sheet comprises a lead-incorporated organic polymer layer having a less frictional layer on one side and a contamination-resistant layer on the other side. A secondary sheet comprises a lead-incorporated organic polymer layer having a less frictional layer on one side and a comfortable skin-feeling layer on the other side. The less frictional layers of the primary and the secondary layer are laminated so as to be in contact with each other. Then, they are formed so that the comfortable skin-feeling layer of the secondary sheet is on the inner side, in other words, on the side of a wearer, and the contamination-resistant layer of the primary sheet is on the outer side. With such a constitution, although it involves the lead-incorporated organic polymer sheets of a large weight, it is comfortable to wear because of excellent flexibility and causes less feeling of fatigue even during wearing for a long period of time. (I.N.)

  15. Analysis of the Interaction of Pulsed Laser with Nanoporous Activated Carbon Cloth

    Institute of Scientific and Technical Information of China (English)

    B.V. Kalucljerovic; M.S. Trtica; B.B. Radak; J.M. Stasic; S.S. Krstic Musovic; V.M. Dodevski

    2011-01-01

    Interaction of pulsed transversely excited atmospheric (TEA) CO2-1aser radiation at 10.6 μm with nanoporous activated carbon cloth was investigated. Activated carbon cloth of different adsorption characteristics was used. Activated carbon cloth modifications were initiated by laser pulse intensities from 0.5 to 28 MW/cm^2, depending on the cloth adsorption characteristics. CO2 laser radiation was effectively absorbed by the used activated carbon cloth and largely converted into thermal energy. The type of modification depended on laser power density, number of pulses, but mostly on material characteristics such as specific surface area. The higher the surface area of activated carbon cloth, the higher the damage threshold.

  16. Protective clothing based on permselective membrane and carbon adsorption

    International Nuclear Information System (INIS)

    Gottschlich, D.; Baker, R.

    1995-01-01

    This paper is a description of Phase I of the US DOE's program to develop improved protective clothing for use by workers engaged in decommissioning and decontamination of former DOE sites, including those used for atomic weapons research and production. Membrane Technology and Research has been developing the clothing with an innovative feature of an ultrathin, permselective outer membrane that is extremely permeable to water but impermeable to toxic organic compounds. Phase I (as described herein) includes fabric optimization, commercial-scale fabric production, and prototype suit evaluation. This phase is complete, with the results discussed in this document

  17. Clothing and personal hygiene

    Science.gov (United States)

    Finogenov, A. M.; Azhayev, A. N.; Kaliberdin, G. V.

    1975-01-01

    The biomedical maintenance of astronauts is discussed in terms of personal hygiene. Principal characteristics and general requirements are described which must be followed in perfecting a system of hygienic practices and in devising means to maintain personal hygiene, flight clothing, underwear, bedding, and medical-domestic equipment for manned space flights of varying durations. Factors discussed include: disposable clothing, thermal protection, oral hygiene, cleansing of the skin, and grooming of the hair.

  18. Effect of wearing clothes on oxygen uptake and ratings of perceived exertion while swimming.

    Science.gov (United States)

    Choi, S W; Kurokawa, T; Ebisu, Y; Kikkawa, K; Shiokawa, M; Yamasaki, M

    2000-07-01

    For a comparative study between swimming in swimwear (control-sw) and swimming in clothes (clothes-sw), oxygen uptake (VO2) and ratings of perceived exertion (RPE) were measured. The subjects were six male members of a university swimming team. Three swimming strokes--the breaststroke, the front crawl stroke and the elementary backstroke--were applied. With regards to clothes-sw, swimmers wore T-shirts, sportswear (shirt and pants) over swimwear and running shoes. In both cases of control-sw and clothes-sw, the VO2 was increased exponentially with increased swimming speed. The VO2 of the subjects during the clothed tests did not exceed 1.4 times of that in the case of control-sw at swimming speeds below 0.3 m/s. As swimming speeds increased, VO2 difference in both cases increased. Consequently, VO2 in the clothed tests was equal to 1.5-1.6 times and 1.5-1.8 times of that in the swimwear tests at speeds of 0.5 and 0.7 m/s, respectively. At speeds below 0.6 m/s in clothes-sw, the breaststroke showed lower VO2 than the front crawl stroke, and the elementary backstroke showed higher VO2 than the other two swimming strokes. RPE increased linearly with %peak VO2. In addition, any RPE differences among the three swimming strokes were not shown in the control-sw tests. At an exercise intensity above 60 %peak VO2, clothed swimmers showed slightly higher RPE in the front crawl stroke compared to that in the two other swimming strokes.

  19. European cloth and "tropical" skin: clothing material and British ideas of health and hygiene in tropical climates.

    Science.gov (United States)

    Johnson, Ryan

    2009-01-01

    As Britain's imperial and colonial ambitions intensified toward the end of the nineteenth century, the preservation of white European health in tropical climates became an increasingly important concern. Since at least the seventeenth century, the "tropics" had been seen as spaces holding vast potential wealth but also death and disease. To combat these deadly but desirable landscapes, the British built a considerable commodity culture around the preservation of white European health, and for many, tropical clothing was one of the most important and essential items in their "kits." This article investigates the composition and use of such clothing in relation to British ideas of health and hygiene in tropical climates. First, it considers debates that ensued over the best material--wool, cotton, linen, silk, or a combination of these materials--and the role of "black" skin and local practice in the development of tropical clothing. Second, it demonstrates the importance of location in any discussion of tropical medicine and hygiene, and the tension and ambiguity that still surrounded British ideas of health and hygiene in the tropical colonies. Third, it argues that tropical clothing was important in the maintenance of climatic etiologies despite advances in parasitology and sanitary science. Finally, it considers the relationship of tropical clothing to the formation of a unique colonial identity. To British men and women embarking for any number of tropical destinations, proper clothing was not a banal and mundane component of their outfitting. For many, the clothing signified a departure from the safe and "civil" climes of Britain for adventure in the expanding tropical empire.

  20. Sustainable clothing: challenges, barriers and interventions for encouraging more sustainable consumer behaviour

    OpenAIRE

    Harris, Fiona; Roby, Helen; Dibb, Sally

    2016-01-01

    Research with consumers has revealed limited awareness of the sustainability impact of clothing (Goworek et al., 2012). Semi-structured interviews conducted with a range of experts in sustainable clothing to increase understanding of the challenges for sustainable clothing revealed that a focus on sustainability alone will not drive the necessary changes in consumers’ clothing purchase, care and disposal behaviour for three reasons: (i) clothing sustainability is too complex; (ii) consumers a...

  1. Scan posture definition and hip girth measurement: the impact on clothing design and body scanning.

    Science.gov (United States)

    Gill, Simeon; Parker, Christopher J

    2017-08-01

    Ergonomic measurement is central to product design and development; especially for body worn products and clothing. However, there is a large variation in measurement definitions, complicated by new body scanning technology that captures measurements in a posture different to traditional manual methods. Investigations of hip measurement definitions in current clothing measurement practices supports analysis of the effect of scan posture and hip measurement definition on the circumferences of the hip. Here, the hip girth is a key clothing measurement that is not defined in current body scanning measurement standards. Sixty-four participants were scanned in the standard scan posture of a [TC] 2 body scanner, and also in a natural posture similar to that of traditional manual measurement collection. Results indicate that scan posture affects hip girth circumferences, and that some current clothing measurement practices may not define the largest lower body circumference. Recommendations are made concerning how the hip is defined in measurement practice and within body scanning for clothing product development. Practitioner Summary: The hip girth is an important measurement in garment design, yet its measurement protocol is not currently defined. We demonstrate that body posture during body scanning affects hip circumferences, and that current clothing measurement practices may not define the largest lower body circumference. This paper also provides future measurement practice recommendations.

  2. Effect of Air Gap Entrapped in Firefighter Protective Clothing on Thermal Resistance and Evaporative Resistance

    Directory of Open Access Journals (Sweden)

    He Hualing

    2018-03-01

    Full Text Available Heat and water vapor transfer behavior of thermal protective clothing is greatly influenced by the air gap entrapped in multilayer fabric system. In this study, a sweating hot plate method was used to investigate the effect of air gap position and size on thermal resistance and evaporative resistance of firefighter clothing under a range of ambient temperature and humidity. Results indicated that the presence of air gap in multilayer fabric system decreased heat and water vapor transfer abilities under normal wear. Moreover, the air gap position slightly influenced the thermal and evaporative performances of the firefighter clothing. In this study, the multilayer fabric system obtained the highest thermal resistance, when the air space was located at position B. Furthermore, the effect of ambient temperature on heat and water vapor transfer properties of the multilayer fabric system was also investigated in the presence of a specific air gap. It was indicated that ambient temperature did not influence the evaporative resistance of thermal protective clothing. A thermographic image was used to test the surface temperature of multilayer fabric system when an air gap was incorporated. These results suggested that a certain air gap entrapped in thermal protective clothing system could affect wear comfort.

  3. The Reality of Virtual Reality Product Development

    Science.gov (United States)

    Dever, Clark

    Virtual Reality and Augmented Reality are emerging areas of research and product development in enterprise companies. This talk will discuss industry standard tools and current areas of application in the commercial market. Attendees will gain insights into how to research, design, and (most importantly) ship, world class products. The presentation will recount the lessons learned to date developing a Virtual Reality tool to solve physics problems resulting from trying to perform aircraft maintenance on ships at sea.

  4. Making the Optimal Decision in Selecting Protective Clothing

    International Nuclear Information System (INIS)

    Price, J. Mark

    2008-01-01

    Protective Clothing plays a major role in the decommissioning and operation of nuclear facilities. Literally thousands of dress-outs occur over the life of a decommissioning project and during outages at operational plants. In order to make the optimal decision on which type of protective clothing is best suited for the decommissioning or maintenance and repair work on radioactive systems, a number of interrelating factors must be considered. This article discusses these factors as well as surveys of plants regarding their level of usage of single use protective clothing and should help individuals making decisions about protective clothing as it applies to their application. Individuals considering using SUPC should not jump to conclusions. The survey conducted clearly indicates that plants have different drivers. An evaluation should be performed to understand the facility's true drivers for selecting clothing. It is recommended that an interdisciplinary team be formed including representatives from budgets and cost, safety, radwaste, health physics, and key user groups to perform the analysis. The right questions need to be asked and answered by the company providing the clothing to formulate a proper perspective and conclusion. The conclusions and recommendations need to be shared with senior management so that the drivers, expected results, and associated costs are understood and endorsed. In the end, the individual making the recommendation should ask himself/herself: 'Is my decision emotional, or logical and economical?' 'Have I reached the optimal decision for my plant?'

  5. Virtual power plant mid-term dispatch optimization

    International Nuclear Information System (INIS)

    Pandžić, Hrvoje; Kuzle, Igor; Capuder, Tomislav

    2013-01-01

    Highlights: ► Mid-term virtual power plant dispatching. ► Linear modeling. ► Mixed-integer linear programming applied to mid-term dispatch scheduling. ► Operation profit maximization combining bilateral contracts and the day-ahead market. -- Abstract: Wind power plants incur practically zero marginal costs during their operation. However, variable and uncertain nature of wind results in significant problems when trying to satisfy the contracted quantities of delivered electricity. For this reason, wind power plants and other non-dispatchable power sources are combined with dispatchable power sources forming a virtual power plant. This paper considers a weekly self-scheduling of a virtual power plant composed of intermittent renewable sources, storage system and a conventional power plant. On the one hand, the virtual power plant needs to fulfill its long-term bilateral contracts, while, on the other hand, it acts in the market trying to maximize its overall profit. The optimal dispatch problem is formulated as a mixed-integer linear programming model which maximizes the weekly virtual power plant profit subject to the long-term bilateral contracts and technical constraints. The self-scheduling procedure is based on stochastic programming. The uncertainty of the wind power and solar power generation is settled by using pumped hydro storage in order to provide flexible operation, as well as by having a conventional power plant as a backup. The efficiency of the proposed model is rendered through a realistic case study and analysis of the results is provided. Additionally, the impact of different storage capacities and turbine/pump capacities of pumped storage are analyzed.

  6. First Indico Virtual Event

    CERN Multimedia

    CERN. Geneva

    2014-01-01

    The first Indico virtual event will take place on February 4th 15:00 and will focus on two main topics The release of Indico v1.2 The migration of the OO Indico backend database (ZODB) to a more standard DBMS It will be fully virtual using the CERN Vidyo service and will foster discussions between developers and administrators of Indico servers worldwide. Connections to the virtual room will be open, but attendees are encouraged to register to the event, in order to be informed of any changes in the organisation if any. If you would like to add a topic of discussion or propose yourself a contribution, please let us know at indico-team@cern.ch. Connection to Vidyo Vidyo connection details are available here CERN Vidyo service documentation can be found here First-time users are encouraged to try the service before connecting to the real event

  7. Shared Emotional Values in Sustainable Clothing Design Approaches

    DEFF Research Database (Denmark)

    Durrani, Marium; Petersen, Louise Ravnløkke Munk; Niinimäki, Kirsi

    2016-01-01

    Recent sustainable initiatives in fashion companies are framing design practices that challenge the traditional role of clothing designers. This preliminary study aims to open discussion on challenging traditional clothing design, through an exploration of the shared emotional values between user...... and designers, when designing for longevity....

  8. The shaping of environmental impacts from Danish production and consumption of clothing

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jensen, Charlotte Louise

    2012-01-01

    The article analyses environmental impacts from production and consumption of clothing in Denmark based on 10 business case studies, an ethnographic study of clothing practices among a group of young women, and a statistical analysis of clothing consumption. The environmental strategies and impacts...... are shaped by the businesses' on-going interpretation of external pressures and opportunities, transnational outsourcing of production to newly industrialised countries, changes towards ‘fast fashion’ and lower retail prices. Differences are identified with respect to whether and when companies take...... a need to show environmental commitment publicly. The fast changing fashions and low price strategies encourage increased clothing consumption among young women, unused clothing in their wardrobes and frequent changes of clothing during the week. Concerns about environmental impacts are limited...

  9. Adsorption of ibuprofen from aqueous solution on chemically surface-modified activated carbon cloths

    Directory of Open Access Journals (Sweden)

    Hanen Guedidi

    2017-05-01

    Full Text Available This study aims to investigate the performance of an activated carbon cloth for adsorption of ibuprofen. The cloth was oxidized by a NaOCl solution (0.13 mol L−1 or thermally treated under N2 (700 °C for 1 hour. The raw and modified cloths were characterized by N2 adsorption–desorption measurement at 77 K, CO2 adsorption at 273 K, Boehm titrations, pHPZC measurements, X-ray Photoelectron Spectroscopy analysis, and by infrared spectroscopy. The NaOCl treatment increases the acidic sites, mostly creating phenolic and carboxylic groups and decreases both the specific surface area and slightly the micropore volume. However, the thermal treatment at 700 °C under N2 induced a slight increase in the BET specific surface area and yielded to the only increase in the carbonyl group content. Ibuprofen adsorption studies of kinetics and isotherms were carried out at pH = 3 and 7. The adsorption properties were correlated to the cloth porous textures, surface chemistry and pH conditions. The isotherms of adsorption were better reproduced by Langmuir–Freundlich models at 298, 313 and 328 K. The adsorption of ibuprofen on the studied activated carbon cloths at pH 3 was an endothermic process. The pore size distributions of all studied ibuprofen-loaded fabrics were determined by DFT method to investigate the accessible porosity of the adsorbate. Both treatments do not influence the kind of micropores where the adsorption of ibuprofen occurred.

  10. Clothing Problems of Upper Middle Socio-Economic Group ...

    African Journals Online (AJOL)

    This paper focuses on the clothing problems of affluent female consumers in the upper middle socioeconomic group, who have money to spend, as well as some access to retail fashion. Their clothing problems were discussed in relation to fashion leadership, fashion involvement, brand typologies, maintaining an interest in ...

  11. Demand planning approaches employed by clothing industry stakeholders in Gauteng, South Africa

    Directory of Open Access Journals (Sweden)

    Ntombizodwa J. Matsoma

    2017-10-01

    Full Text Available Background: The decline in the productivity of the South African clothing industry was attributed to changing trends in the number of clothing production organisations, which together with a decline in manufacturing output and a fluctuation in employment had all contributed to complexities in demand planning. Purpose: This article investigates demand planning approaches in the clothing industry in Gauteng. Method: A descriptive study was conducted based on a structured questionnaire. Findings: The results revealed that both hierarchical and optimal approaches should be considered in clothing manufacturing. Managerial implications: In order to improve demand planning practices in the clothing industry, managers are recommended to apply hierarchical and optimal demand planning approaches, which might bring about improvements to demand planning in the Gauteng clothing industry. Conclusion: It is recommended that clothing manufacturers consider the types of product offering before making decisions about adopting the hierarchical or optimal demand planning approaches. When planning for basic clothes, manufacturers should consider a hierarchical demand planning approach, whereas the optimal demand planning approach is recommended for fashion clothes.

  12. Pre-Employment Laboratory Education. Clothing/Fashion Design Guidebook.

    Science.gov (United States)

    Texas Tech Univ., Lubbock. Home Economics Instructional Materials Center.

    This guidebook is designed for use in teaching students enrolled in preemployment laboratory education (PELE) clothing/fashion design programs. The first of two major sections includes an overview for teachers on planning, conducting, and evaluating a PELE clothing/fashion design program. Specific topics discussed in section 1 include (1)…

  13. The mature female clothing shopper: Profiles and shopping behaviour

    Directory of Open Access Journals (Sweden)

    E. M. Visser

    1996-06-01

    Full Text Available This study was designed to profile the mature female clothing shopper. More specifically certain variables that could be attributed to differences in consumer behaviour were investigated. Mature female clothing shoppers were segmented as clothing moderates, clothing enthusiasts and the clothing unconcerned. These three cluster groups significantly differed regarding clothing involvement, clothing orientation, activities, interests, opinions, family orientation, needs and media usage. No significant differences were found among the three groups regarding evaluative criteria for clothing and clothing store attributes. Profiles of the clusters were developed, along with applicable marketing implications. Recommendations for further research are made. Opsomming  Hierdie studie is onderneem ten einde die vroulike kledingverbruikers van 55 en ouer te tipeer. Die veranderlikes wat 'n bydrae kon lewer ten opsigte van die verskille in verbruikersgedrag is ondersoek. Die verbruikers is gesegmenteer as die kledinggematigdes, kleding- entoesiaste en die kleding-onbetrokkenes. Die drie groeperings verskil beduidend van mekaar ten opsigte van die volgende veranderlikes naamlik: kleding-betrokkenheid, kleding-oriëntasie, aktiwiteite belangstellings, opinies, familie oriëntasie, behoeftes en media gebruik. Geen beduidende verskille kon gevind word tussen die drie groeperings ten opsigte van die veranderlikes evalueringskriteria van klere en winkeleienskappe nie. Profiele van die verskillende trosse is ontwikkel en die bemarkingsimplikasies is uitgewys. Aanbevelings vir verdere navorsing word gedoen.

  14. Forensic Analysis of High Explosive Residues from Selected Cloth

    International Nuclear Information System (INIS)

    Mohamad Afiq Mohamed Huri; Umi Kalthom Ahmad

    2014-01-01

    Increased terrorist activities around the Asian region have resulted in the need for improved analytical techniques in forensic analysis. High explosive residues from post-blast clothing are often encountered as physical evidence submitted to a forensic laboratory. Therefore, this study was initiated to detect high explosives residues of cyclotrimethylenetrinitramine (RDX) and pentaerythritol tetranitrate (PETN) on selected cloth in this study. Cotton swabbing technique was employed as a simple and rapid method in recovering analytes from the sample matrix. Analytes were analyzed using Griess spot test, TLC and HPLC. TLC separation employed toluene-ethyl acetate (9:1) as a good solvent system. Reversed phase HPLC separation employed acetonitrile-water (65:35) as the mobile phase and analytes detected using a programmed wavelength. RDX was detected at 235 nm for the first 3.5 min and then switched to 215 nm for PETN. Limits of detection (LODs) of analytes were in the low ppm range (0.05 ppm for RDX and 0.25 ppm for PETN). Analyte recovery studies revealed that the type of cloth has a profound effect on the extraction efficiency. Analytes were recovered better for nylon as compared to cotton cloth. However, no analytes could be recovered from denim cloth. For post-blast samples, only RDX was detected in low concentration for both nylon and cotton cloth. (author)

  15. Improvement of thermal comfort by cooling clothing in warm climate

    DEFF Research Database (Denmark)

    Sakoi, Tomonori; Melikov, Arsen Krikor; Kolencíková, Sona

    2014-01-01

    on the inner surface. We conducted experiments with human subjects in climate chambers maintained at 30 °C and RH 50% to compare the effectiveness of the cooling clothing with that of other convective cooling devices. The use of cooling clothing with a convective cooling device improved the subjects’ thermal...... comfort compared to convective cooling alone. The supply of a small amount of water allowed the cooling clothing to provide a continuous cooling effect, whereas the effect of convective cooling alone decreased as sweat dried. However, the controllability of the cooling clothing needs to be improved....

  16. The influence of human physical activity and contaminated clothing type on particle resuspension

    International Nuclear Information System (INIS)

    McDonagh, A.; Byrne, M.A.

    2014-01-01

    A study was conducted to experimentally quantify the influence of three variables on the level of resuspension of hazardous aerosol particles from clothing. Variables investigated include physical activity level (two levels, low and high), surface type (four different clothing material types), and time i.e. the rate at which particles resuspend. A mixture of three monodisperse tracer-labelled powders, with median diameters of 3, 5, and 10 microns, was used to “contaminate” the samples, and the resuspended particles were analysed in real-time using an Aerodynamic Particle Sizer (APS), and also by Neutron Activation Analysis (NAA). The overall finding was that physical activity resulted in up to 67% of the contamination deposited on clothing being resuspended back into the air. A detailed examination of the influence of physical activity level on resuspension, from NAA, revealed that the average resuspended fraction (RF) of particles at low physical activity was 28 ± 8%, and at high physical activity was 30 ± 7%, while the APS data revealed a tenfold increase in the cumulative mass of airborne particles during high physical activity in comparison to that during low physical activity. The results also suggest that it is not the contaminated clothing's fibre type which influences particle resuspension, but the material's weave pattern (and hence the material's surface texture). Investigation of the time variation in resuspended particle concentrations indicated that the data were separable into two distinct regimes: the first (occurring within the first 1.5 min) having a high, positive rate of change of airborne particle concentration relative to the second regime. The second regime revealed a slower rate of change of particle concentration and remained relatively unchanged for the remainder of each resuspension event. -- Highlights: • Experimental investigation of the resuspension of hazardous particles from clothing. • Influence of human physical activity

  17. Clothing and the Affects on a Teacher's Image: How Students View Them

    Science.gov (United States)

    Mosca, Joseph B.; Buzza, John

    2013-01-01

    Clothing is an essential element of our daily lives that is basically an expression of who we are. People shop to buy clothing for a variety of reasons, such as enjoyment and socialization. It is fundamental that participating in social activities and life satisfaction are related to well-being. Our well-being is influenced by education, income,…

  18. House dust mites on skin, clothes, and bedding of atopic dermatitis patients.

    Science.gov (United States)

    Teplitsky, Valery; Mumcuoglu, Kosta Y; Babai, Ilan; Dalal, Ilan; Cohen, Rifka; Tanay, Amir

    2008-08-01

    Atopic dermatitis is a common allergic condition in children, often associated with a positive skin reaction to house dust mite allergens. To determine the presence of house dust mites on the skin, clothes, and bedding of patients with atopic dermatitis. Nineteen patients with atopic dermatitis were examined during a 2-year period. Samples from affected and healthy skin surfaces were obtained with adhesive tape, and dust samples from bedding and clothes were collected with a vacuum cleaner at the start of the study and 3-6 weeks later, and examined for the presence of house dust mites. The findings were compared with those of 21 healthy controls. The most common mite species on skin were Dermatophagoides pteronyssinus and Dermatophagoides farinae, which were found in nine patients and three controls. The patient group showed a significantly larger percentage of samples with mites than did the control group (34.9% and 7.9%, respectively) (P bedding of patients, or between patients and controls with regard to the number of mites on the clothes and bedding. Patients with atopic dermatitis showed a higher prevalence of mites on their skin than did healthy individuals, which could be involved in allergic sensitization and disease exacerbation.

  19. From clothing to textual seduction in Marivaux's Le Paysan parvenu and La Vie de Marianne

    Directory of Open Access Journals (Sweden)

    Jacques Guilhembet

    2015-12-01

    Full Text Available Firstly, this article assesses the importance of textile in both Jacob and Marianne’s destiny and it examines the power of seduction of their new clothes, on themselves and on others. Once become narrators, thanks to the power of writing, they try to create a connivance with their readers and to influence them in their favor by adorning, weaving and embroiding the canvas of their existence. Therefore, this article analyses the principle rhetorical processes used by both narrators so as to seduce the reader : their assertion of the spontaneity of their writing, the creation of a bond with the reader, the appeal to emotion, self-justification, setting self-worth, romanticizing one’s past, humour and self-mockery.

  20. The concept of managerial accounting for business clothing industry

    OpenAIRE

    Luchko, М.

    2010-01-01

    The article discusses the problem of constructing the management accounting concept for business clothing industry taking into account factors of production decline in the current context. Concept of separate components is studies, which depend on the characteristics of clothing manufacture.

  1. Sustainability and Philanthropic Awareness in Clothing Disposal Behavior Among Young Malaysian Consumers

    Directory of Open Access Journals (Sweden)

    Loi Wai Yee

    2016-01-01

    Full Text Available Young consumers are the stylish shoppers who have a strong tendency to follow the latest fashion. With the rapid changes in the fashion trends, the overconsumption of clothing has had a significant environmental impact on society. Hence, there is a need to understand how young fashionable consumers are disposing their unwanted clothes. The survey was conducted among 205 young respondents, and the results show that clothing disposal behavior is affected by philanthropic awareness and mediated by the attitude toward clothing disposal. Interestingly, environmental economic factors only influence clothing disposal behavior through the attitude toward the disposal of clothing. The findings provide a valuable insight into the government and related authorities or organizations in developing strategies to encourage young consumers to increase their clothing-recycling rate, and, thus, eliminate the environmental issues in near future.

  2. Influence of relative humidity and temperature on quantity of electric charge of static protective clothing used in petrochemical industry

    Science.gov (United States)

    Zhang, Yunpeng; Liu, Quanzhen; Liu, Baoquan; Li, Yipeng; Zhang, Tingting

    2013-03-01

    In this paper, the working principle of static protective clothing and its testing method of quantity of electric charge are introduced, and the influence of temperature and relative humidity on the quantity of electric charge (qe) of static protective clothing is studied by measuring qe of different clothing samples. The result shows that temperature and relative humidity can influence qe of static protective clothing to some extent and the influence of relative humidity is bigger than that of temperature. According to experimental results, the relationship of qe and relative humidity and temperature was analysed, and the safety boundary of quantity of electric charge is discussed. In order to reduce the occurrence of electrostatic accidents and ensure safe production and operation of petrochemical industry, some suggestions on choosing and using of static protective clothing are given for guaranteeing its static protective performance.

  3. CLOTHING BUYING MOTIVES AND STORE SELECTION CRITERIA – THE CASE OF CROATIAN ADOLESCENTS

    Directory of Open Access Journals (Sweden)

    Blaženka Knežević

    2016-12-01

    Full Text Available The aim of this paper is to analyse Croatian adolescents’ clothing buying motives and their retail store selection criteria. The paper examined their preferences, attitudes and behaviours when buying clothes - whether adolescents with different primary clothing motives would have similar or different store selection criteria. Also, the paper determined how today’s adolescents spend money on clothes and whether they are more inclined to purchase branded clothes or not. Finally, the paper explained whether Croatian adolescents prefer purchasing in small or large specialized apparel stores, or whether they are more prone to online purchasing or even buying clothes in second-hand shops. Also, the society influences in forming adolescents’ attitudes and decisions towards store selection and purchasing preferences of clothes were examined. The research findings showed that shopping centres are the preferred retail format. In addition, adolescents do not have a fully developed attitude on fashion and clothing. Therefore, they strongly refer to opinions of family and friends when choosing clothes. Moreover, the Internet and TV are evaluated as influential channels of consumer communication within this particular group of consumers. Based on the findings, suggestions for service management and marketing strategies are provided for apparel retail companies that target adolescents.

  4. Potential applications of smart clothing solutions in health care and personal protection.

    Science.gov (United States)

    Meinander, Harriet; Honkala, Markku

    2004-01-01

    The rapid development in the fields of sensor and telecommunication technologies has created completely new possibilities also for the textile and clothing field. New smart textile and clothing systems can be developed by integrating sensors in the textile constructions. Application fields for these added-value products are e.g. protective clothing for extreme environments, garments for the health care sector, technical textiles, sport and leisure wear. Some products have already been introduced on the markets, but generally it can be stated that the development is only in its starting phase, and the expectations for the future are big. Many different aspects have to be considered in the development of the wearable technology products for the health care sector: medical problems and their diagnosis, sensor choice, data processing and telecommunication solutions, clothing requirements. A functional product can be achieved only if all aspects work together, and therefore experts from all fields should participate in the RTD projects. In the EC-funded project DE3002 Easytex clothing and textiles for disabled and elderly people were investigated. Some recommendations concerning durability, appearance, comfort, service and safety of products for different special user groups were defined, based on user questionnaires and seminars, general textile and clothing requirements and on laboratory test series."Clothing Area Network--Clan" is a research project aiming to develop a technical concept and technology needed in enabling both wired and wireless data and power transfer between different intelligent modules (user interfaces, sensors, CPU's, batteries etc.) integrated into a smart clothing system. Fire-fighters clothing system is chosen as the development platform, being a very challenging application from which the developed technology can be transferred to other protective clothing systems.

  5. Impact of reference groups on the teenagers’ buying process of clothing in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Jana Turčínková

    2011-01-01

    Full Text Available The main objective of our research was to suggest recommendations for Czech producers of clothing for brand building and marketing communication strategies with Czech consumers in age group 13 to 19 years, therefore, our goal was to analyze consumer behavior of Czech youth when buying and using clothing and to analyze factors influencing their behavior, with the emphasis on reference groups and these results are presented in this paper. The target group (consumers 13–19 years old was selected because it’s often been neglected in recent marketing researches. The research consisted of primarily qualitative research (n = 96 in the form of in-depth interviews and pilot quantitative research (n = 200 in a form of online survey. The data collection was conducted in time period March 17–April 22, 2011. On the basis of data analysis, authors suggested general recommendations for improving marketing communication strategy of fashion producers in the Czech Republic. The results hint differences in the buying behavior of clothing between respondents in the age 13–15 and 16–19 years. The group of 13–15 years old teenagers doesn’t consider clothing brands as a very important criterion when choosing particular piece of clothing, while for the older group brands matter. The 16–19 year old ones are significantly more influenced by their friends and opinion leaders, while the for the younger group this influence comes not from their peers, but mostly parents.

  6. Role of clothing in both accelerating and impeding dermal absorption of airborne SVOCs

    DEFF Research Database (Denmark)

    Morrison, Glenn C.; Weschler, Charles J.; Bekö, Gabriel

    2016-01-01

    To assess the influence of clothing on dermal uptake of semi-volatile organic compounds (SVOCs), we measured uptake of selected airborne phthalates for an individual wearing clean clothes or air-exposed clothes and compared these results with dermal uptake for bare-skinned individuals under....... The individual wore either clean (fresh) cotton clothes or cotton clothes that had been exposed to the same chamber air concentrations for 9 days. For a 6-h exposure, the net amounts of DEP and DnBP absorbed when wearing fresh clothes were, respectively, 0.017 and 0.007 μg/kg/(μg/m3); for exposed clothes...... the results were 0.178 and 0.261 μg/kg/(μg/m3), respectively (values normalized by air concentration and body mass). When compared against the average results for bare-skinned participants, clean clothes were protective, whereas exposed clothes increased dermal uptake for DEP and DnBP by factors of 3.3 and 6...

  7. Buying clothes from thrift stores: an analysis of young people consuming second-hand clothing in Rio de Janeiro

    Directory of Open Access Journals (Sweden)

    Sílvia Borges Corrêa

    2015-05-01

    Full Text Available This article presents the results of a research that analyzed the consumption of second-hand clothing among young people in the city of Rio de Janeiro. Theoretically speaking, the research was guided by the anthropological perspective of consumption. The research was conducted based on the ethnographic method with participant observation and in-depth interviews. The results show the relationships between consumers and merchandise and reveal the main motivations for buying second-hand clothing and accessories.

  8. Flammability on textile of flight crew professional clothing

    Science.gov (United States)

    Silva-Santos, M. C.; Oliveira, M. S.; Giacomin, A. M.; Laktim, M. C.; Baruque-Ramos, J.

    2017-10-01

    The issue about flammability of textile materials employed in passenger cabins of commercial aircrafts is an important part of safety routines planning. Once an in-flight emergency initiated with fire or smoke aboard, time becomes critical and the entire crew must be involved in the solution. It is part of the crew functions, notably the attendants, the in-flight firefighting. This study compares the values of textile material of flight attendant working cloths and galley curtain fabric with regard to flammability and Limiting Oxygen Index (LOI). Values to the professional clothing material indicate that they are flammable and the curtains, self-extinguishing. Thus, despite of the occurrences of fire outbreaks in aircrafts are unexceptional, the use of other materials and technologies for uniforms, such as alternative textile fibers and flame retardant finishes should be considered as well as the establishment of performance limits regarding flame and fire exposing.

  9. Facts and Fiction on Ultraviolet Protection by Clothing

    International Nuclear Information System (INIS)

    Osterwalder, U.; Schlenker, W.; Rohwer, H.; Martin, E.; Schuh, S.

    2000-01-01

    With the increase of skin cancer the fact that not all apparel is sufficiently protective against UV Radiation is becoming better know to the public. There is an emerging market for UV protective clothing. Its need is not commonly accepted. Understanding of the influencing factors is low. To the consumer it is not always clear what is fact and what is fiction. This paper answers six frequently asked questions. (1) The need for improving UV protection by clothing is demonstrated by UV transmittance measurements in public. (2) A pitfall in the generally recommended 'see through' assessment test is shown. (3) When a garment gets wet its UV protection is not necessarily poor. (4) The reduced UV protection of stretched knitwear can be accounted for. (5) A real life study confirms that UV protection is not washed out. (6) UV protection can be washed in with special additives to laundry products. (author)

  10. Cleaning of work clothing

    CERN Document Server

    2007-01-01

    As of March 2007, the laundry service (TS/FM) will introduce a new procedure for the collection of work clothing and its redistribution when returned to CERN from the laundry. Clothes will no longer be collected from and distributed to the usual points, but will have to be deposited and exchanged at a pre-defined location and specific time, as specified below: For Meyrin site: Bldg. 2/ R-402 Every second Thursday between 8-00 and 9-30. Starting on Thursday, March 22, 2007. For Prévessin site and SM18: Bldg. 933/ R-007. Every second Thursday between 10-00 and 11-30. Starting on Thursday, March 22, 2007. Notices explaining the procedure to be followed will be posted at the collection points used until now. No change in present practice is foreseen, however, for LHC Points 2 and 5. If you require any further information please call the laundry service on 16 2056 or 16 0053.

  11. Cleaning of work clothing

    CERN Multimedia

    2007-01-01

    As of March 2007, the laundry service (TS/FM) will introduce a new procedure for the collection of work clothing and its redistribution when returned to CERN from the laundry. Clothes will no longer be collected from and distributed to the usual points, but will have to be deposited and exchanged at a pre-defined location and at specific times, as follows: For Meyrin site: in Bldg. 2/ R-402 Each second Thursday between 8-00 and 9-30. Starting on Thursday, March 22, 2007. For Prévessin site and SM18: in Bldg. 933/ R-007. Each second Thursday between 10-00 and 11-30. Starting on Thursday, March 22, 2007. Notices explaining the procedure to be followed will be posted at the collection points used until now. No change in present practice is foreseen, however, for LHC Points 2 and 5. If you require any further information please call the laundry service on 16 2056 or 16 0053.

  12. Cleaning of work clothing

    CERN Multimedia

    2007-01-01

    As of March 2007, the laundry service (TS/FM) will introduce a new procedure for the collection of work clothing and its redistribution when returned to CERN from the laundry. Clothes will no longer be collected from and distributed to the usual points, but will have to be deposited and exchanged at a pre-defined location and specific time, as specified below: For Meyrin site: Bldg. 2/ R-402 Every second Thursday between 8.00 a.m. and 9.30 a.m. Starting on Thursday, March 22, 2007. For Prévessin site and SM18: Bldg. 933/ R-007. Every second Thursday between 10.00 a.m. and 11.30 a.m. Starting on Thursday, March 22, 2007. Notices explaining the procedure to be followed will be posted at the collection points used until now. No change in present practice is foreseen, however, for LHC Points 2 and 5. If you require any further information please call the laundry service on 16 2056 or 16 0053.

  13. Double fastener-type contamination protective cloth

    International Nuclear Information System (INIS)

    Nomura, Norio.

    1996-01-01

    In the cloth of the present invention, a hood portion covering the entire of a head and a suit portion having an upper half body portion and a lower half body portion connected to the upper half portion for covering from a neck to ankles are made integrated. The suit portion has long sleeves at the upper half body portion, and has strait leg portions at the lower half body portion. Two linear sliding fasteners are disposed from the neck portion on the front surface of the suit portion to the lower edges of both ankle portions. The sliding fasteners have a double structure having a folded portion at the inner side. Slits are formed on the outer side surfaces of each of the ankle portions and openable/closable face fasteners are attached. A rubber is incorporated in the wrist portions at the top ends of the long sleeves to be in close contact with the wrists. An operator can easily put on and off the cloth without withdrawing legs. Accordingly, radioactive contamination can be prevented upon putting on and off the cloth. (I.N.)

  14. Preliminary engineering analysis for clothes washers

    Energy Technology Data Exchange (ETDEWEB)

    Biermayer, Peter J.

    1996-10-01

    The Engineering Analysis provides information on efficiencies, manufacturer costs, and other characteristics of the appliance class being analyzed. For clothes washers, there are two classes: standard and compact. Since data were not available to analyze the compact class, only clothes washers were analyzed in this report. For this analysis, individual design options were combined and ordered in a manner that resulted in the lowest cumulative cost/savings ratio. The cost/savings ratio is the increase in manufacturer cost for a design option divided by the reduction in operating costs due to fuel and water savings.

  15. Flip flops, dress clothes, and no coat: clothing barriers to children's physical activity in child-care centers identified from a qualitative study

    Directory of Open Access Journals (Sweden)

    Saelens Brian E

    2009-11-01

    Full Text Available Abstract Background Three-quarters of 3-6 year-old children in the U.S. spend time in childcare; many spend most of their waking hours in these settings. Daily physical activity offers numerous health benefits, but activity levels vary widely across centers. This study was undertaken to explore reasons why physical activity levels may vary. The purpose of this paper is to summarize an unexpected finding that child-care providers cited was a key barrier to children's physical activity. Methods Nine focus groups with 49 child-care providers (55% black from 34 centers (including inner-city, suburban, Head Start and Montessori were conducted in Cincinnati, OH. Three independent raters analyzed verbatim transcripts for themes. Several techniques were used to increase credibility of findings, including interviews with 13 caregivers. Results Two major themes about clothing were: 1 children's clothing was a barrier to children's physical activity in child-care, and 2 clothing choices were a significant source of conflict between parents and child-care providers. Inappropriate clothing items included: no coat/hat/gloves in the wintertime, flip flops or sandals, dress/expensive clothes, jewelry, and clothes that were either too loose or too tight. Child-care providers explained that unless there were enough extra coats at the center, a single child without a coat could prevent the entire class from going outside. Caregivers suggested several reasons why parents may dress their child inappropriately, including forgetfulness, a rushed morning routine, limited income to buy clothes, a child's preference for a favorite item, and parents not understanding the importance of outdoor play. Several child-care providers favored specific policies prohibiting inappropriate clothing, as many reported limited success with verbal or written reminders to bring appropriate clothing. Conclusion Inappropriate clothing may be an important barrier to children's physical

  16. Flip flops, dress clothes, and no coat: clothing barriers to children's physical activity in child-care centers identified from a qualitative study

    Science.gov (United States)

    2009-01-01

    Background Three-quarters of 3-6 year-old children in the U.S. spend time in childcare; many spend most of their waking hours in these settings. Daily physical activity offers numerous health benefits, but activity levels vary widely across centers. This study was undertaken to explore reasons why physical activity levels may vary. The purpose of this paper is to summarize an unexpected finding that child-care providers cited was a key barrier to children's physical activity. Methods Nine focus groups with 49 child-care providers (55% black) from 34 centers (including inner-city, suburban, Head Start and Montessori) were conducted in Cincinnati, OH. Three independent raters analyzed verbatim transcripts for themes. Several techniques were used to increase credibility of findings, including interviews with 13 caregivers. Results Two major themes about clothing were: 1) children's clothing was a barrier to children's physical activity in child-care, and 2) clothing choices were a significant source of conflict between parents and child-care providers. Inappropriate clothing items included: no coat/hat/gloves in the wintertime, flip flops or sandals, dress/expensive clothes, jewelry, and clothes that were either too loose or too tight. Child-care providers explained that unless there were enough extra coats at the center, a single child without a coat could prevent the entire class from going outside. Caregivers suggested several reasons why parents may dress their child inappropriately, including forgetfulness, a rushed morning routine, limited income to buy clothes, a child's preference for a favorite item, and parents not understanding the importance of outdoor play. Several child-care providers favored specific policies prohibiting inappropriate clothing, as many reported limited success with verbal or written reminders to bring appropriate clothing. Conclusion Inappropriate clothing may be an important barrier to children's physical activity in child

  17. Analysis and study of low-carbon clothing design and fashion lifestyle

    Directory of Open Access Journals (Sweden)

    Yan Zhang

    2016-10-01

    Full Text Available Low-carbon is not only a slogan, but also a global action to protect the environment. In the clothing industry, low-carbon clothing design has drawn public focus and it also conveyed the notion that we should respect for nature and advocate the concept of conservation. Through the analysis and study of low-carbon clothing design, it comes to two conclusions: On the subjective aspect, low-carbon design consciousness of designers which humanization of costume design, design clothing beyond beauty, thinking and caring about people; on the objective aspects, low-carbon clothing design is analyzed in three main aspects: fabric, color and styling. It is necessary to put low-carbon concept into people’s behavior consciousness and let the slow fashion environmental concept return back to people’s fashion lifestyle, so that consumers can look for their self-positioning and rational thinking. Therefore, the design of low-carbon clothing should be raised to the design of humanistic care to ensure that low-carbon concept is a global need and responsibility.

  18. Analysis Of Students' Performance In Clothing And Textiles In ...

    African Journals Online (AJOL)

    Analysis Of Students' Performance In Clothing And Textiles In Colleges Of ... in Clothing and Textiles more than foods and Nutrition and Home Management. ... poor attitude of students towards clothing and Textiles, lack of enough time ...

  19. Space environment durability of beta cloth in LDEF thermal blankets

    Science.gov (United States)

    Linton, Roger C.; Whitaker, Ann F.; Finckenor, Miria M.

    1993-01-01

    Beta cloth performance for use on long-term space vehicles such as Space Station Freedom (S.S. Freedom) requires resistance to the degrading effects of the space environment. The major issues are retention of thermal insulating properties through maintaining optical properties, preserving mechanical integrity, and generating minimal particulates for contamination-sensitive spacecraft surfaces and payloads. The longest in-flight test of beta cloth's durability was on the Long Duration Exposure Facility (LDEF), where it was exposed to the space environment for 68 months. The LDEF contained 57 experiments which further defined the space environment and its effects on spacecraft materials. It was deployed into low-Earth orbit (LEO) in Apr. 1984 and retrieved Jan. 1990 by the space shuttle. Among the 10,000 plus material constituents and samples onboard were thermal control blankets of multilayer insulation with a beta cloth outer cover and Velcro attachments. These blankets were exposed to hard vacuum, thermal cycling, charged particles, meteoroid/debris impacts, ultraviolet (UV) radiation, and atomic oxygen (AO). Of these space environmental exposure elements, AO appears to have had the greatest effect on the beta cloth. The beta cloth analyzed in this report came from the MSFC Experiment S1005 (Transverse Flat-Plate Heat Pipe) tray oriented approximately 22 deg from the leading edge vector of the LDEF satellite. The location of the tray on LDEF and the placement of the beta cloth thermal blankets are shown. The specific space environment exposure conditions for this material are listed.

  20. Importance of clothing brands on the purchasing decisions of Generation Y in the Vaal Triangle area / Mothapo, M.N.

    OpenAIRE

    Mothapo, Moshibudi Nancy

    2013-01-01

    This study focuses on the importance of clothing brands on the purchasing decisions of Generation Y individuals. The research concentrates specifically on university students aged between 17 to 26 years, located in the Vaal Triangle Area. This study aims to determine if this group of Generation Y members are brand conscious in their choices of clothing brands and what influences or motivates them to buy clothing brands. The findings suggest that Generation Y students are brand conscious, in t...

  1. Introduction to the special issue on virtual reality environments in behavioral sciences.

    Science.gov (United States)

    Riva, Giuseppe; Wiederhold, Brenda K

    2002-09-01

    Virtual reality (VR) is usually described in biology and in medicine as a collection of technologies that allow people to interact efficiently with three-dimensional (3-D) computerized databases in real time using their natural senses. This definition lacks any reference to head-mounted displays (HMDs) and instrumented clothing such as gloves or suits. In fact, less than 10% of VR healthcare applications in medicine are actually using any immersive equipment. However, if we focus our attention on behavioral sciences, where immersion is used by more than 50% of the applications, VR is described as an advanced form of human- computer interface that allows the user to interact with and become immersed in a computer-generated environment. This difference outlines a different vision of VR shared by psychologists, psychotherapists, and neuropsychologists: VR provides a new human-computer interaction paradigm in which users are no longer simply external observers of images on a computer screen but are active participants within a computer-generated 3-D virtual world. This special issue investigates this vision, presenting some of the most interesting applications actually developed in the area. Moreover, it discusses the clinical principles, human factors, and technological issues associated with the use of VR in the behavioral sciences.

  2. Influence of relative humidity and temperature on quantity of electric charge of static protective clothing used in petrochemical industry

    International Nuclear Information System (INIS)

    Zhang, Yunpeng; Liu, Quanzhen; Liu, Baoquan; Li, Yipeng; Zhang, Tingting

    2013-01-01

    In this paper, the working principle of static protective clothing and its testing method of quantity of electric charge are introduced, and the influence of temperature and relative humidity on the quantity of electric charge (q e ) of static protective clothing is studied by measuring q e of different clothing samples. The result shows that temperature and relative humidity can influence q e of static protective clothing to some extent and the influence of relative humidity is bigger than that of temperature. According to experimental results, the relationship of q e and relative humidity and temperature was analysed, and the safety boundary of quantity of electric charge is discussed. In order to reduce the occurrence of electrostatic accidents and ensure safe production and operation of petrochemical industry, some suggestions on choosing and using of static protective clothing are given for guaranteeing its static protective performance.

  3. Massa-individualisering in de kledingindustrie [Mass-individualisation in the clothing industry

    NARCIS (Netherlands)

    Daanen, H.A.M.

    1998-01-01

    When purchasing clothing, the customer has to go through the tedious process of selecting clothing he or she likes and selecting clothing that fits his or her body. The customer is at the end of the line: the clothing is already manufactured. This has the advantage that clothing can be produced

  4. Field tests on human tolerance to (LNG) fire radiant heat exposure, and attenuation effects of clothing and other objects

    International Nuclear Information System (INIS)

    Raj, Phani K.

    2008-01-01

    A series of field tests exposing mannequins clothed with civilian clothing to a 3 m x 3 m square liquefied natural gas (LNG) pool fire was conducted. Both single layer clothing and double layer clothing were used. The radiant heat flux incident outside the clothing and incident on the skin covered by clothing were measured using wide-angle radiometers, for durations of 100-200 s (per test). The levels of heat flux incident on the clothing were close to 5 kW/m 2 . The magnitude of the radiant heat attenuation factor (AF) across the thickness was determined. AF varies between 2 and higher for cotton and polyester clothing (thickness 0.286-1.347 mm); AF value of 6 was measured for 1.347 mm thickness. Single sheet newspaper held about 5 cm in front of mannequins and exposed to incident flux of 5 kW/m 2 resulted in AF of 5, and AF of 8 with double sheets. AF decreases linearly with increasing heat flux values and linearly increases with thickness. The author exposed himself, in normal civilian clothing (of full sleeve cotton/polyester shirt and jean pants), to radiant heat from a LNG fire. The exposure was for several tens of seconds to heat flux levels ranging from 3.5 kW/m 2 to 5 + kW/m 2 (exposure times from 25 s to 97 s at average heat flux values in the 4 kW/m 2 and 5 kW/m 2 range). Occasionally, he was exposed to (as high as) 7 kW/m 2 for durations of several seconds. He did not suffer any unbearable or even severe pain nor did he experience blisters or burns or any other injury on the unprotected skin of his body. The incident heat fluxes on the author were measured by a hand-held radiometer (with digital display) as well as by strapped on wide-angle radiometers connected to a computer. He could withstand the US regulatory criterion of 5 kW/m 2 (for 30 s) without suffering any damage or burns. Temperature measured on author's skin covered by clothing did not rise above the normal body temperature even after 200 s of exposure to 4 kW/m 2 average heat flux

  5. the prevalence of pulmonary tuberculosis in the durban. clothing ...

    African Journals Online (AJOL)

    99% of 7,510 clothing workers in Durban were X-rayed on mass ..... hands. . Clothing workers in Durban work 42t hours over a. 5 day week, and any overtime is paid for at the rate of .... the group of ]84 workers caught up in the second.

  6. The application and development of artificial intelligence in smart clothing

    Science.gov (United States)

    Wei, Xiong

    2018-03-01

    This paper mainly introduces the application of artificial intelligence in intelligent clothing. Starting from the development trend of artificial intelligence, analysis the prospects for development in smart clothing with artificial intelligence. Summarize the design key of artificial intelligence in smart clothing. Analysis the feasibility of artificial intelligence in smart clothing.

  7. A review of heat transfer phenomena and the impact of moisture on firefighters' clothing and protection.

    Science.gov (United States)

    Morel, Aude; Bedek, Gauthier; Salaün, Fabien; Dupont, Daniel

    2014-01-01

    Protective clothing with high insulation properties helps to keep the wearer safe from flames and other types of hazards. Such protection presents some drawbacks since it hinders movement and decreases comfort, in particular due to heat stress. In fact, sweating causes the accumulation of moisture which directly influences firefighters' performance, decreasing protection due to the increase in radiant heat flux. Vaporisation and condensation of hot moisture also induces skin burn. To evaluate the heat protection of protective clothing, Henrique's equation is used to predict the time leading to second-degree burn. The influence of moisture on protection is complex, i.e., at low radiant heat flux, an increase in moisture content increases protection, and also changes thermal properties. Better understanding of heat and mass transfer in protective clothing is required to develop enhanced protection and to prevent burn injuries. This paper aims to contribute to a better understanding of heat and mass transfer inside firefighters' protective clothing to enhance safety. The focus is on the influence of moisture content and the prevention of steam burn.

  8. Musical and clothing invitations to protection.

    Science.gov (United States)

    Deniaud, F

    1993-01-01

    The Chaussez Capote Project interviewed 48 youths in Abidjan and Dabou aged 14-25 years on how to best get individuals in their age group to use condoms. 251 individuals aged 15-25 were also surveyed in Abidjan on the same subject. While more than 80% of this latter group had already discussed AIDS, sexually transmitted disease (STD), and prevention with others, 90% still wanted advice on these themes from medical staff and the media. 40% who had already used condoms did so incorrectly, while approximately 33% had experienced condom breakage during use. Respondents felt that condom promotion should be associated with information on AIDS, STDs, and contraception or information on general health. In response to this feedback, the project commissioned the creation of a promotional music cassette with French and African songs of different musical styles. Lyrics imparted technical information and correct misconceptions related to condom use. Free distribution of the cassette commenced August 1992, and approximately 800 were given to organizations and businesses. The cassette also aired on radio and Ivorian television, but met with only limited success. It is thought that its impact was limited due to the small number of copies duplicated and inefficient distribution. A new version was therefore created with different songs and short messages by popular African singers for local duplication and sale at a subsidized price starting December 1993. As a 2nd intervention, clothing metaphors applied to condoms and condom use were applied to the development of a clothing promotion loincloth designed Spring 1993. The cloth was pretested and revised to ultimately consist of panels depicting 2 young couples, a condom, a panther, and the words Entre nous. The cloth has been ordered for use by the National AIDS Committee, a condom social marketing project, and the French agency for development cooperation.

  9. Try Before You Buy: Using Virtual Reality for Travel Planning

    OpenAIRE

    Nunez San Juan, Ricardo

    2017-01-01

    Master's thesis in International Hotel and Tourism Management Technological innovations have been transforming the way we handle tourism. Virtual reality (VR), one of the most recent commercially available technologies, is an underexplored marketing opportunity for destination marketing organizations (DMOs) and for companies within the tourism industry. This emerging technology can help to build a closer relationship between DMOs and the traveler. Within this context, it is predicted that ...

  10. Substantiation of the permissible radioactive contamination of working clothes

    International Nuclear Information System (INIS)

    Shcherbakov, V.L.; Korostin, A.S.

    1977-01-01

    A permissible level of working clothes contamination was determined on the base of the main migration routes of radioactive contaminants: permeation directly through the clothes into subclothes space on skin surface, emission into the air with amount of contaminants subsequently got by the organism of a working person through inhalation as well as transfer in the process of contacting of contaminated working clothes and surfaces of premises equipment, working person hands with amount of contaminants posteriorly got by the organism by alimentary or inhalation ways. Using the experimental and literature data available the permissible levels of working clothes contamination for the mentioned migration routes of radioactive materials have been calculated. According to the data obtained the permissible levels of working clothes contamination must not exceed 4 alpha-part/(cm 2 xmin) for contamination with high-tonic isotopes, 20 alpha-part./(cm 2 xmin) with other alpha-detine isotopes, 1000 beta-part./(cm 2 xmin) with beta-active ones. The permissible level of contamination of additional materials of the individual protection in the case of their contamination with high-tonic alpha-actine isotopes must not exceed 50 alpha-part./(cm 2 xmin), 200 alpha-part./(cm 2 xmin) for contamination th other alpha-active isotopes and 400 beta-part./(cm 2 xmin) with beta-active isotopes

  11. Governance and Upgrading Practices in Cloth Production Value Chain

    African Journals Online (AJOL)

    This study examines the governance _pal/ern and upgrading _practices of value chain of cloth _production, focusing on micro and small cloth _producing entetprises in Addis Ababa. The study is based on a sample of 222 respondents drawn from various actors of the value chain in the city. The value chain is found out to ...

  12. "This One's for VIP Users!": Participation and Commercial Strategies in Children's Virtual Worlds

    OpenAIRE

    Carolina Martinez

    2014-01-01

    Through the integrated framework of participation theory and political economy, this article analyzes participatory opportunities in the virtual world Habbo Hotel, and how participation is constrained and framed by the producer's commercial strategies, which are based on advertising and sales of virtual goods. The study also looks into the ways in which the producer Sulake Corporation discursively represents the virtual world, and how the users with various forms of tactics try to bypass the ...

  13. Relationship between behavioural factors and colour preferences for clothing

    Directory of Open Access Journals (Sweden)

    Milena Fornazarič

    2018-03-01

    Full Text Available The colour of clothing plays an important role in one’s emotional reaction and the selection of clothes, which in turn effects design, the fashion industry and sales. In our behavioural research involving the Slovenian population regarding the selection of colours, we used the results of opportunity sampling, i.e. a web survey using a sample of 204 respondents, who were invited to participate in the research using an email list sampling method. Our aim was determine how demographic and behavioural characteristics affect colour preferences for clothing. Demographic characteristics are not important in terms of the behaviour of different segments of the population, except with regard to gender. Nevertheless, we can use the results of the survey to make a correlation between colour and consumer characteristics. Those who are fond of the colour beige follow fashion trends more closely than the others, while the colour white is associated with those who follow fashion on web and in online shopping. On the contrary, consumers who prefer pink and purple primarily buy clothes in fashion shops. Those who prefer brown and beige enjoy the shopping experience more than others, while lovers of the colour pink are less inclined to buy clothes during sales than others. Consumers who prefer the colour blue are predominant in fitting shops, while those who prefer the colour black do not to buy clothes on Saturdays. Lovers of the colour blue stand out in terms of spending, while people who are fond of the colour white spend the most, although they prefer to buy less expensive clothes. People drawn to the colour grey prefer to buy less expensive jackets, while women who prefer the colour green also buy less expensive jackets. We recommend expanding the scope of the research to include historical determinants, fashion patterns, marketing communication and fashion brands, as well as other, more rational and speculative motives associated with a subject

  14. 20 CFR 670.640 - Are students provided with clothing?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Are students provided with clothing? 670.640 Section 670.640 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR THE JOB... the work force. Center operators and other service providers must issue clothing and clothing...

  15. Electronic emission and electron spin resonance of irradiated clothes: (cottons, synthetic clothes)

    International Nuclear Information System (INIS)

    El Ajouz Rima, H.

    1984-10-01

    This thesis is devoted to a new method of dosimetry applicable to accidental irradiations. It is based on the use of cotton and synthetic fabric clothes as detectors. It enables absorbed doses and body dose distributions to be estimated after an accidental irradiation. A bibliography on textile fibres used for clothing is presented in the first chapter: origin, structure, industrial treatments, effects of heat, light, ionizing radiations. In the second chapter, electronic emission generated by double stimulation (thermal and optic) is described. This phenomenon reveals changes in the surface state of cotton. Exo-emission was chosen because of its high sensitivity in dosimetry. The third chapter is devoted to the application of electron paramagnetic resonance to the dosimetry of irradiated fabrics. After a brief description of the spectrometer used, the results obtained with commercial cotton fabrics and with a special fabric realized by the Institut Textile de France are described some of these fabrics were subjected to special treatments either before or after irradiation. Synthetic fabrics (polyesters and polypropylene) have also been studied. (author)

  16. Process analysis of an in store production of knitted clothing

    Science.gov (United States)

    Buecher, D.; Kemper, M.; Schmenk, B.; Gloy, Y.-S.; Gries, T.

    2017-10-01

    In the textile and clothing industry, global value-added networks are widespread for textile and clothing production. As a result of global networking, the value chain is fragmented and a great deal of effort is required to coordinate the production processes [1]. In addition, the planning effort on the quantity and design of the goods is high and risky. Today the fashion industry is facing an increasing customer demand for individual and customizable products in addition to short delivery times [2]. These challenges are passed down to the textile and clothing industry decreasing batch sizes and production times. Conventional clothing production cannot fulfill those demands especially when combined with more and more individual or customizable designs. Hence new production concepts have to be developed.

  17. Establishment of a Clothing Company in Finland Based on a University Brand Case: LAMK Apparel Company

    OpenAIRE

    Biliba, Arsenii; Mishchenko, Nikita

    2017-01-01

    This thesis aims to assist LAMK Apparel Company in its entry into the clothing market, in Finland. Based on country analysis of the two target countries (Russia and Finland), its original business idea is developed together with innovative concepts. Accordingly, the business plan is created to describe an applicable development way for the idea. The authors focus on the process of establishing a clothing company in Finland based on a university brand through the implementation of a business p...

  18. A comparison of penetration and damage caused by different types of arrowheads on loose and tight fit clothing.

    Science.gov (United States)

    MacPhee, Nichole; Savage, Anne; Noton, Nikolas; Beattie, Eilidh; Milne, Louise; Fraser, Joanna

    2018-03-01

    Bows and arrows are used more for recreation, sport and hunting in the Western world and tend not to be as popular a weapon as firearms or knives. Yet there are still injuries and fatalities caused by these low-velocity weapons due to their availability to the public and that a licence is not required to own them. This study aimed to highlight the penetration capabilities of aluminium arrows into soft tissue and bones in the presence of clothing. Further from that, how the type and fit of clothing as well as arrowhead type contribute to penetration capacity. In this study ballistic gelatine blocks (non-clothed and loose fit or tight fit clothed) were shot using a 24lb weight draw recurve bow and aluminium arrows accompanied by four different arrowheads (bullet, judo, blunt and broadhead). The penetration capability of aluminium arrows was examined, and the depth of penetration was found to be dependent on the type of arrowhead used as well as by the type and fit or lack thereof of the clothing covering the block. Loose fit clothing reduced penetration with half of the samples, reducing penetration capacity by percentages between 0% and 98.33%, at a range of 10m. While the remaining half of the samples covered with tight clothing led to reductions in penetration of between 14.06% and 94.12%. The damage to the clothing and the gelatine (puncturing, cutting and tearing) was affected by the shape of the arrowhead, with the least damaged caused by the blunt arrowheads and the most by the broadhead arrows. Clothing fibres were also at times found within the projectile tract within the gelatine showing potential for subsequent infection of an individual with an arrow wound. Ribs, femur bones and spinal columns encased in some of the gelatine blocks all showed varying levels of damage, with the most and obvious damage being exhibited by the ribs and spinal column. The information gleaned from the damage to clothing, gelatine blocks and bones could potentially be useful for

  19. Determination of Aniline Degraded From Sudan I in Cloths

    International Nuclear Information System (INIS)

    Wei, C.K.; Fung, L.C.; Men, C.K.

    2013-01-01

    A method development for the determination of an aromatic amine degraded from an azo dye in cloths was carried out. Sodium dithionite was used to cleave the azo bond of Sudan I into its aromatic amines, and the amines, mainly aniline were analyzed using high performance liquid chromatography (HPLC) with UV detection. The efficiency of the reduction process of Sudan I, based on the degree of decolorisation of dye, was measured using the spectrophotometer. The optimized values of the reduction process was found effective when 1:1 ratio of 0.30 % sodium dithionite to Sudan I (dit/ Sud) was used at pH 8. The recovery percentage and relative standard deviation (R.S.D.) of this method was found to be 62.9 - 88.4 % and 7.6 - 21.5 %, respectively. The proposed method was tested on self-dyed cloth samples with Sudan I. Aniline released from the reduction of Sudan I was detected in the self-dyed cloth samples. The results of this study demonstrate the applicability of sodium dithionite for the reduction of the azo dye in the cloth samples. (author)

  20. The systematization of information: functional clothes through the mind map

    Directory of Open Access Journals (Sweden)

    Eliete Auxiliadora Assunção Ourives

    2016-12-01

    Full Text Available Currently, if checks the evolution in women's clothing design aiming at the well-being, comfort and quality of life. However, women still complain of discomfort of breast movement during physical activities carried out in factory floors and sporting activities, among other activities. This discomfort, according to the women, increases during the menstrual period. Therefore, to structure the information on the subject is important, because it will suit the functional clothing designs for these activities. The mind map is a tool suitable for this because assists the organization process of thought and understanding of the information about a particular subject. With that, this work aims to structure information for project requirements with a focus on functional female clothing. The method of research is descriptive and exploratory character. In the end, this work presented project guidelines of functional guidelines female clothing through the process of analysis the mind map.

  1. Textiles and clothing sustainability sustainable fashion and consumption

    CERN Document Server

    2017-01-01

    This is the first book to introduce and explain the concept of sustainable consumption with reference to the clothing sector. It uses various case studies to detail sustainable consumption behavior in the industry. Consumption is a key issue and is a major driver when it comes to sustainability in any industry, including clothing sector. Several studies which have highlighted the need for sustainable consumption in the clothing sector are discussed in this book.

  2. The influence of human physical activity and contaminated clothing type on particle resuspension.

    Science.gov (United States)

    McDonagh, A; Byrne, M A

    2014-01-01

    A study was conducted to experimentally quantify the influence of three variables on the level of resuspension of hazardous aerosol particles from clothing. Variables investigated include physical activity level (two levels, low and high), surface type (four different clothing material types), and time i.e. the rate at which particles resuspend. A mixture of three monodisperse tracer-labelled powders, with median diameters of 3, 5, and 10 microns, was used to "contaminate" the samples, and the resuspended particles were analysed in real-time using an Aerodynamic Particle Sizer (APS), and also by Neutron Activation Analysis (NAA). The overall finding was that physical activity resulted in up to 67% of the contamination deposited on clothing being resuspended back into the air. A detailed examination of the influence of physical activity level on resuspension, from NAA, revealed that the average resuspended fraction (RF) of particles at low physical activity was 28 ± 8%, and at high physical activity was 30 ± 7%, while the APS data revealed a tenfold increase in the cumulative mass of airborne particles during high physical activity in comparison to that during low physical activity. The results also suggest that it is not the contaminated clothing's fibre type which influences particle resuspension, but the material's weave pattern (and hence the material's surface texture). Investigation of the time variation in resuspended particle concentrations indicated that the data were separable into two distinct regimes: the first (occurring within the first 1.5 min) having a high, positive rate of change of airborne particle concentration relative to the second regime. The second regime revealed a slower rate of change of particle concentration and remained relatively unchanged for the remainder of each resuspension event. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Analysis of misunderstanding in clothing online marketing%网络服装营销的误区分析及对策

    Institute of Scientific and Technical Information of China (English)

    白柳

    2015-01-01

    服装商品的网络销售是传统服装销售方式的拓展,不仅为消费者带来全新的销售体验,更为服装生产者带来更为广阔的销售空间。网络服装营销更多地表现为虚拟营销,与传统营销方式差异明显。正确认识并且走出误区,才能在网络世界赢得服装营销更多的利润空间。%The internet marketing of garment commodity is a new garment business model developed from the traditional one.Garment online selling can not only bring a new shopping experience for cus-tomers,but also create a larger management space for cloth producers.The point is that although gar-ment online selling is a new marketing concept and model,born under the modern economic conditions, people should know that garment online marketing is more like a virtual marketing,and also,the differ-ences between traditional sale model and the modern one need to be clarified.Based on these,there will not be misunderstandings,and merchants can gain much higher profit margin from cloth marketing by virtual network economy.

  4. Telepresence and virtual environment applications on the light duty utility arm system

    International Nuclear Information System (INIS)

    Pardini, A.F.; Rod, S.R.

    1995-01-01

    The Tri-Party Agreement was initiated in 1989 to provide a thirty-year clean-up plan for the United States Department of Energy's (DOE) Hanford Site. This plan addresses the remediation of hazardous chemical and radioactive wastes with a major emphasis on the characterization of Hanford's underground waste storage tanks. To assist in this task the DOE is funding the development of a light duty robotic arm capable of deploying various tools which can inspect and characterize the interior of DOE waste tanks. Current development includes two new technologies -- stereoscopic telepresence, which will allow three-dimensional viewing of the waste tank interior; and open-quotes virtual environmentsclose quotes (or open-quotes virtual realityclose quotes), which will provide computer-simulated world wherein operators can practice inspections and other activities prior to performing actual operations in real waste tanks

  5. "This One's for VIP Users!": Participation and Commercial Strategies in Children's Virtual Worlds

    Directory of Open Access Journals (Sweden)

    Carolina Martinez

    2014-06-01

    Full Text Available Through the integrated framework of participation theory and political economy, this article analyzes participatory opportunities in the virtual world Habbo Hotel, and how participation is constrained and framed by the producer's commercial strategies, which are based on advertising and sales of virtual goods. The study also looks into the ways in which the producer Sulake Corporation discursively represents the virtual world, and how the users with various forms of tactics try to bypass the commercial constraints. The methods used include observations of the English and Swedish language versions of Habbo Hotel, document analysis, and an interview with one designer employed by Sulake. The results show how participation in this virtual world takes minimalist forms, and that it is foremost an arena for interaction and consumption. Users' participation in the virtual world is constrained by the commercial strategies in numerous ways, and the producer strategically takes advantage of children's need to gain status in their peer group, in order to get them to purchase on the site. Habbo Hotel is represented by the producer as a safe and creative environment with learning opportunities for the children. Observations of the virtual world instead reveal Habbo as a panopticon-like shopping mall where users, through the practice of begging and other tactics, try to resist the commercial strategies. Virtual worlds could be potential spaces for children's participation and contribute to a democratization of the social; however, this study shows how participation in this virtual world is clearly structured and limited for commercial purposes.

  6. Roadmap to sustainable textiles and clothing regulatory aspects and sustainability standards of textiles and the clothing supply chain

    CERN Document Server

    2015-01-01

    This book covers the elements involved in achieving sustainability in textiles and clothing sector. The chapters covered in three volumes of this series title cover all the distinctive areas earmarked for achieving sustainable development in textiles and clothing industry. This third volume highlights the areas pertaining to the regulatory aspects and sustainability standards applicable to textiles and clothing supply chain. There are various standards earmarked for measuring the environmental impacts and sustainability of textile products. There are also plenty of certification schemes available along with the index systems applicable to textile sector. Brands and manufactures are also venturing into new developments to achieve sustainable development in textile sector. This third volume addresses all these important aspects.

  7. Impact of reference groups on the teenagers’ buying process of clothing in the Czech Republic

    OpenAIRE

    Jana Turčínková; Jiří Moisidis

    2011-01-01

    The main objective of our research was to suggest recommendations for Czech producers of clothing for brand building and marketing communication strategies with Czech consumers in age group 13 to 19 years, therefore, our goal was to analyze consumer behavior of Czech youth when buying and using clothing and to analyze factors influencing their behavior, with the emphasis on reference groups and these results are presented in this paper. The target group (consumers 13–19 years old) was selecte...

  8. Virtual 3d City Modeling: Techniques and Applications

    Science.gov (United States)

    Singh, S. P.; Jain, K.; Mandla, V. R.

    2013-08-01

    3D city model is a digital representation of the Earth's surface and it's related objects such as Building, Tree, Vegetation, and some manmade feature belonging to urban area. There are various terms used for 3D city models such as "Cybertown", "Cybercity", "Virtual City", or "Digital City". 3D city models are basically a computerized or digital model of a city contains the graphic representation of buildings and other objects in 2.5 or 3D. Generally three main Geomatics approach are using for Virtual 3-D City models generation, in first approach, researcher are using Conventional techniques such as Vector Map data, DEM, Aerial images, second approach are based on High resolution satellite images with LASER scanning, In third method, many researcher are using Terrestrial images by using Close Range Photogrammetry with DSM & Texture mapping. We start this paper from the introduction of various Geomatics techniques for 3D City modeling. These techniques divided in to two main categories: one is based on Automation (Automatic, Semi-automatic and Manual methods), and another is Based on Data input techniques (one is Photogrammetry, another is Laser Techniques). After details study of this, finally in short, we are trying to give the conclusions of this study. In the last, we are trying to give the conclusions of this research paper and also giving a short view for justification and analysis, and present trend for 3D City modeling. This paper gives an overview about the Techniques related with "Generation of Virtual 3-D City models using Geomatics Techniques" and the Applications of Virtual 3D City models. Photogrammetry, (Close range, Aerial, Satellite), Lasergrammetry, GPS, or combination of these modern Geomatics techniques play a major role to create a virtual 3-D City model. Each and every techniques and method has some advantages and some drawbacks. Point cloud model is a modern trend for virtual 3-D city model. Photo-realistic, Scalable, Geo-referenced virtual 3

  9. Cooling clothing utilizing water evaporation

    DEFF Research Database (Denmark)

    Sakoi, Tomonori; Tominaga, Naoto; Melikov, Arsen Krikor

    2014-01-01

    . To prevent wet discomfort, the T-shirt was made of a polyester material having a water-repellent silicon coating on the inner surface. The chest, front upper arms, and nape of the neck were adopted as the cooling areas of the human body. We conducted human subject experiments in an office with air......We developed cooling clothing that utilizes water evaporation to cool the human body and has a mechanism to control the cooling intensity. Clean water was supplied to the outer surface of the T-shirt of the cooling clothing, and a small fan was used to enhance evaporation on this outer surface...... temperature ranging from 27.4 to 30.7 °C to establish a suitable water supply control method. A water supply control method that prevents water accumulation in the T-shirt and water dribbling was validated; this method is established based on the concept of the water evaporation capacity under the applied...

  10. Effect of fabric stuff of work clothing on the physiological strain index at hot conditions in the climatic chamber

    Directory of Open Access Journals (Sweden)

    Habibollah Dehghan

    2014-01-01

    Full Text Available Aims: The purpose of the present study was to evaluate the effect of fabric stuff of work clothing that are widely used in Iran industries on the physiological strain index (PSI at hot conditions in the climatic chamber. Materials and Methods: This interventional study was performed upon 18 male students in 16 trials, which included combination of four kinds of work clothing (13.7% viscose (VIS 86.3% polyester(PES, 30.2% cotton [CT]-69.8% PES, 68.5% CT-31.5% PES, 100% CT, two activity levels (light and moderate and two kinds of climatic conditions included hot-wet (T a = 35, RH = 70% and hot-dry (T a = 38, RH = 40%. During each trial, the RH and core temperature was recorded once a minute and then PSI was calculated. Data were analyzed by using SPSS-16 software. Results: The results showed that in hot-wet conditions, the least value of PSI in light and moderate activities was related to 100% CT clothing and 30.2% CT-69.8% PES clothing, respectively. In hot-dry conditions, the least value of PSI in both of activities was related to 30.2% CT-69.8% PES clothing. The mean value of PSI in hot-wet conditions, during moderate activity had significant difference for various clothing types (P = 0.044. Conclusion: The research findings showed that for a heat strain reduction in hot-wet conditions at light activity level, 100% CT clothing is suitable. Furthermore, at moderate activity level, 30.2% CT-69.8% PES clothing and in hot-dry conditions, 30.2% CT-69.8% PES is suitable.

  11. Controlled interaction: strategies for using virtual reality to study perception.

    Science.gov (United States)

    Durgin, Frank H; Li, Zhi

    2010-05-01

    Immersive virtual reality systems employing head-mounted displays offer great promise for the investigation of perception and action, but there are well-documented limitations to most virtual reality systems. In the present article, we suggest strategies for studying perception/action interactions that try to depend on both scale-invariant metrics (such as power function exponents) and careful consideration of the requirements of the interactions under investigation. New data concerning the effect of pincushion distortion on the perception of surface orientation are presented, as well as data documenting the perception of dynamic distortions associated with head movements with uncorrected optics. A review of several successful uses of virtual reality to study the interaction of perception and action emphasizes scale-free analysis strategies that can achieve theoretical goals while minimizing assumptions about the accuracy of virtual simulations.

  12. Clothing Systems Design Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Clothing Systems Design Lab houses facilities for the design and rapid prototyping of military protective apparel.Other focuses include: creation of patterns and...

  13. Export strategy risks and governance in the clothing industry

    Directory of Open Access Journals (Sweden)

    Arthur Mapanga

    2016-08-01

    Full Text Available This paper investigates the export strategy implementation risks in Zimbabwe’s clothing sector with a view to build a framework for improving strategy implementation and governance. The government of Zimbabwe has formulated a five year export strategic blue-print to resuscitate the clothing value chain. However, to date, no visible movement towards implementing the export strategy has materialised. The sector is on the brink of collapse putting the welfare and livelihood of over two million people dependent on the sector at risk. A desk research and key informant interviews were conducted to understand the barriers causing inertia in the implementation of the export strategy. Cotton farmers’ unions’ representatives, the cotton ginners association members, the spinning industry members and garment manufacturers representatives, clothing retailers’ representatives, workers’ unions’ members and government officials were important sources of information towards the discovery of the risks. From the research, six of the strategy implementation risks were linked to human elements. Leadership, consensus and commitment deficiencies militated against the implementation of the export strategy in the clothing value chain. There is also a lack of trust among the value chain actors leading to the dislocation of efforts to resuscitate the sector

  14. FAST FASHON AND SECOND HAND CLOTHES BETWEEN ECOLOGICAL CONCERNS AND GLOBAL BUSINESS

    Directory of Open Access Journals (Sweden)

    CUC Sunhilde

    2014-05-01

    Full Text Available The paper presents the concept of the fast fashion and how these lead to an excessive consumption of clothes and as result a growth of the worn products market. The paper also aims to establish how fast fashion is influencing not only the economy also the environment. The fast fashion model can also damage developing economies with a low household income, which are not the necessary most important markets of these companies. Our study has identified the influences in increased purchase behavior and focused especially of the positive relationship between income and clothing expenses. We found out that it is a large gap between the European countries regarding clothing expenses in year and Romania is for far the lowest consumer. It is presented the second hand clothes import-export trade during 2007-2012 and we found out that there is an inverse relation between the balances sheet of import-export of textile products between the developed and developing countries. The authors conclude that the Romania is the largest European importer of second hand clothes but has no large scale recycling. Since collection is done on a voluntary basis it can be confusing for population to know how and where to discard used clothing therefore it is recommended a focus on collection systems of second hand clothes. The methodology used for this paper has mainly been a literature study where both scientific literature, such as scientific articles and reports, and popular science articles have been studied. We also use official information provided from National and International statistical Offices. Academic research on the effects of redirecting used clothing from the waste stream is still in its infancy; however this paper provides some insights into the phenomenon which may add to the emerging literature. .

  15. Social and philosophical analysis of brand clothes : the Ukrainian context

    Directory of Open Access Journals (Sweden)

    H. V. Skalatskaya

    2016-06-01

    Full Text Available The purpose of the article is to consider the prospects of social and philosophical analysis of the product (clothes of fashion brand. In social and philosophical analysis of brand clothes, its fashion shows there is a range of discursive questions: the use and the definition of the concepts «designer» and «brand»; thematic focus of the brand (fabrics, colors, prints, shapes its semantics; format of representation of fashion collection in dependence; and a number of other structural elements. In the analysis of fashion trends or seasonal collections the concepts designer or brand are used. The concept «brand» contains an economic component, certain calculations, and intangible assets (goodwill; design work is subject to market needs and the interests of consumers (for analysis of the individual designer the biographical method is used. Theoretical analysis of fashion cannot be made apart from empirical material. A performative approach of K. Wolfe can be the methodology of the social and philosophical research of fashion show. The advantages of this method of the research are to determine fashion as performative space, staging ideas of the designer in the fashion show and making clothes. Implementation of performative approach allowed considering thematic focus of the brand of clothes and format of its representation in seasonal fashion shows on the example of Ukrainian brand «Domanoff». Social and philosophical analysis of brand clothes can be divided into the following main components, excluding aesthetic and economic aspects: the use of the concepts designer and brand (a set of aesthetic, economic, social and subjective components and design`s view; review of the semantics of clothes and staging (by providing clothes in the form of seasonal fashion shows of collections. For complex social and socio­philosophical analysis of fashion brand it necessary to have: the press release (description, designer`s interview (disclosure of early

  16. The usage of phase change materials in fire fighter protective clothing: its effect on thermal protection

    Science.gov (United States)

    Zhao, Mengmeng

    2017-12-01

    The thermal protective performance of the fire fighter protective clothing is of vital importance for fire fighters. In the study fabrics treated by phase change materials (PCMs) were applied in the multi-layered fabrics of the fire fighter protective clothing ensemble. The PCM fabrics were placed at the different layers of the clothing and their thermal protective performance were measured by a TPP tester. Results show that with the application of the PCM fabrics the thermal protection of the multi-layered fabrics was greatly increased. The time to reach a second degree burn was largely reduced. The location of the PCM fabrics at the different layers did not affect much on the thermal protective performance. The higher amount of the PCM adds on, the higher thermal protection was brought. The fabrics with PCMs of a higher melting temperature could contribute to higher thermal protection.

  17. ISLAMIC EDUCATION IN CIVILIZATION OF FASHION INDUSTRY: CLOTHES CONCEPT REFLECTION IN ISLAM

    Directory of Open Access Journals (Sweden)

    Ahmad Mustami

    2015-06-01

    Full Text Available This article discusses the concept Apparel in Islamic education. This was currently a lot of variety of fashion in dress. Although the general function of clothes was a human genitalia cover and protect the body from the heat of the sun. However hijab at this time not just cover the nakedness, but rather as a fashion style that became a common thing now was infecting the womenfolk including Muslim. Ranging from clothes, pants, until hijab began in innovation so as to attract the eye. Although it is not yet represent the shape and fashion model/standard clothes, but felt able to express Islamic education in the dressing (hijab and a fashion model/Islamic clothing. Obviously keep on religious norms, ethical and moral teachings. Substance of clothing in Islam is polite in accordance with the values of Islamic Education.

  18. Demand planning approaches employed by clothing industry stakeholders in Gauteng, South Africa

    OpenAIRE

    Ntombizodwa J. Matsoma; Intaher M. Ambe

    2017-01-01

    Background: The decline in the productivity of the South African clothing industry was attributed to changing trends in the number of clothing production organisations, which together with a decline in manufacturing output and a fluctuation in employment had all contributed to complexities in demand planning. Purpose: This article investigates demand planning approaches in the clothing industry in Gauteng. Method: A descriptive study was conducted based on a structured questionnaire. ...

  19. Development and validation of makeup and sexualized clothing questionnaires.

    Science.gov (United States)

    Smith, Haylie; Perez, Marisol; Sladek, Michael R; Becker, Carolyn Black; Ohrt, Tara K; Bruening, Amanda B

    2017-01-01

    Body acceptance programs on college campuses indicated that collegiate women often report feeling pressure to dress in a sexualized manner, and use makeup to enhance beauty. Currently, no quantitative measures exist to assess attitudes and daily behaviors that may arise in response to perceived pressure to wear makeup or dress in a provocative manner. The goal of the current studies was to develop brief self-report questionnaires aimed at assessing makeup and sexualized clothing use and attitudes in young women. An exploratory factor analysis in a sample of 403 undergraduate women was used in Study 1 to create items to measure the pressure women feel to wear makeup and sexualized clothing. A confirmatory factor analysis ( N  = 153) was used in Study 2 to confirm the factor structure found in Study 1. An incremental validity analysis was also conducted in Study 2. Across both studies, participants completed online questionnaires. In Study 1, items were developed for two questionnaires to assess perceived pressure to wear makeup and discomfort when not wearing makeup, and perceived pressure to wear sexualized clothing, and body image concerns with regards to sexualized clothing. The exploratory factor analyses revealed Unconfident and Unease scales for the Makeup Questionnaire (MUQ) and Body Dissatisfaction and Pressure scales for the Sexualized Clothing Questionnaire (SCQ). In Study 2, the confirmatory factor analyses confirmed the factor structure for the MUQ and SCQ. The incremental validity analysis revealed that these measures can be used to predict self-objectification and shape and weight concern in women. These studies provide preliminary support for the factor structure of two novel questionnaires aimed at assessing perceived pressure to wear makeup and sexualized clothing.

  20. Uncovering Sundanese Values by Analyzing Symbolic Meaning of Ménak Priangan Clothing (1800-1942)

    Science.gov (United States)

    Karmila, M.; Suciati; Widiaty, I.

    2016-04-01

    This study investigates symbolic meanings found in the Sunda ethnic clothing, particularly the Menak Priangan clothing. This study aims to uncover and document those symbolic meanings found in the Menak Priangan clothing as an effort to develop Sunda cultural artefacts of West Java. This study on Menak Priangan clothing applies ethnography (visual) and aesthetic methods. The visual method is utilized in order to uncover local cultural (Sunda) values found in Menak Priangan clothing visualization, including: design, model, name, and representing colours, which then directed towards local Sundanese aesthetic concepts living within the Priangan community. Furthermore, aesthetic method is used to explore role of aesthetic values in empowering visual cultural values within certain community, particularly Sunda aesthetic values. The study results show that since the 19th century, Sunda ethnic clothing was limited to Priangan Sunda only, while traditional clothing wearing by Priangan people reflects their social strata, consisting of: a. Menak Gede (Menak pangluhurna: mayor), bearing raden title, b. Menak Leutik/Santana (mayor assistant), titles: asep, mas, agus, ujang, (Nyimas for woman), c. Somah/Cacah: ordinary people/lower class. Clothing is a cultural phenomenon within certain culture reflecting such society experiences. For Menak people, clothing and its accessories have important meanings. They wear such traditional clothing and accessories as a symbol of power they have within bureaucratic structure and as a symbol of social status they bear within traditional community structure.

  1. Otzi, the iceman and his leather clothes.

    Science.gov (United States)

    Püntener, Alois G; Moss, Serge

    2010-01-01

    Over 5000 years ago, a man climbed up to the icy heights of the glacier in South Tyrol, Italy and died. He was found by accident in 1991, with his clothes and equipment, mummified and frozen: an archaeological sensation and a unique snapshot of a Copper Age man. For several years highly specialised research teams have examined the mummy and all accompanying items. This paper describes how fur and leather clothes of the iceman could have been tanned. Details of the analytical tests undertaken on the 5000 year old leather samples and what they revealed are presented.

  2. The influence of the clothing sales assistant on the female ...

    African Journals Online (AJOL)

    Administrator

    Should the right relationship between the sales assis- tant and the ... In addition, the consumer's satisfaction with the clothing sales ... Approach consumer. • Behaviour ...... Journal of International Consumer Marketing 17(1):33-. 52. JONES, MA ...

  3. In-depth assessment of the situation of the textile and clothing sector in the EU and prospects : Task 1: survey on the situation of the European textile and clothing sector and prospects for its future development

    NARCIS (Netherlands)

    Scheffer, M.R. (Michiel)

    2011-01-01

    The in-depth assessment of the situation of the European textile and clothing sector is composed by six independent reports with a close focus on key aspects useful to understand the dynamics and the development of the textile and clothing industry, drivers of change – most notably the impact

  4. Environmental Effects on the Polypyrrole Tri-layer Actuator

    Directory of Open Access Journals (Sweden)

    Nirul Masurkar

    2017-04-01

    Full Text Available Electroactive polymer actuators such as polypyrrole (PPy are exciting candidates to drive autonomous devices that require low weight and low power. A simple PPy tri-layer bending type cantilever which operates in the air has been demonstrated previously, but the environmental effect on this actuator is still unknown. The major obstacle in the development of the PPy tri-layer actuator is to create proper packaging that reduces oxidation of the electrolyte and maintains constant displacement. Here, we report the variation in the displacement as well as the charge transfer at the different environmental condition. PPy trilayer actuators were fabricated by depositing polypyrrole on gold-coated porous poly(vinylidene fluoride (PVDF using the electro-synthesis method. It has been demonstrated that the charge transfer of tri-layer actuators is more in an inert environment than in open air. In addition, tri-layer actuators show constant deflection and enhancement of life due to the negligible oxidation rate of the electrolyte in an inert environment.

  5. Protective clothing in the sun | Tamas | Nigerian Journal of Clinical ...

    African Journals Online (AJOL)

    Sun protecting clothing is clothing designed for sun protection and is producted from the fabric rated for its level ultraviolet (UV) protection. Some textiles and fabrics emloyed in the use of sun protective clothing may be pre-treated with UV inhibiting ingredients during manufacture to enhance their UV blocking capacitiy.

  6. Ethnicity and Acculturation: Influences on Asian American Consumers' Purchase Decision Making for Social Clothes.

    Science.gov (United States)

    Kang, Jikyeong; Kim, Youn-Kyung

    1998-01-01

    Responses from 172 Chinese Americans, 185 Japanese Americans, and 144 Korean Americans revealed distinct reference group, media, and store attribute influences on clothing purchases. Patterns differed depending on degree of acculturation. (SK)

  7. RE FLECTIONS FROM TRADITIONAL CLOTHES OF KONYA REGION TODAY

    Directory of Open Access Journals (Sweden)

    E.Elhan ÖZUS

    2014-07-01

    Full Text Available Clothing is the way of wearing that is owned by a society, or a job. There is the essance of social statue and differance rather than fashion. In this aspect made a way of wearing according to their own custom and social organism. One of the specialities of setting apart the societies and defining their cultural differances and social classes is the way of wearing. As it is known, Turkish clothes reflecting the specialities of Turki sh culture and way of living them are the greatest heritage coming from ancient times. Between those heritages, women clothes show a great variety of examples. If you look into those examples, you will see the delight of past, way of art, way of living. Th ose clothes also are at the quality of certificate showing the delight of Turkish people. In this study, traditional Anatolian part of our culture in the position of clothes to protect , promote and special occasions using the transfer to future generation s in terms of Konya traditional women's clothes from the old carpets , rugs and ethnographic goods trading profession dealing with Velinaci Gezgin's stores located in the clothes were examined This study identified and the traditional dresses fabric , patterns and motifs are made by making use of designs suitable to the present day fashion . The technique used in the research is defined firstly the survey of written resources. As the result of research made in that area, observations, research and findi ngs are transferred into text.

  8. Mestizaje and clothing

    DEFF Research Database (Denmark)

    Wilson, Fiona

    2007-01-01

    self-consciousness as mestizos and Mexicans. The determinants and implications of movement are traced through clothing, in relation to when, why and how men and women in small town Mexico adopted 'modern' styles of dress. Migration to the US opened up possibilities of dressing to cross social as well...

  9. "Lady is in Heaven!" Study on the Treatment Pronoun use in Clothing Stores' Female

    Directory of Open Access Journals (Sweden)

    Fabio Antonialli

    2015-06-01

    Full Text Available An important factor for customer satisfaction is the quality of service. In the context of small businesses, such as small clothing shops, this importance is not always taken into account. The clothing sector is connected to the changes in social relations, is rich in symbolic content, allowing the observation of expressive aspects of material culture, as well as the use of treatment pronouns mainly 'you' and 'madam'. In this sense, the aim of this study was to identify the consumers opinion in relation to the treatment pronoun used by employees in female clothing stores. Data were computed and processed using SPSS software. Techniques of descriptive statistics (frequency distribution and cross tabulations, nonparametric tests (chi-square and multivariate techniques such as cluster analysis and discriminant analysis were used. It was observed that, especially for the group of women aged between 30 and 40 years the use of the pronoun 'madam' can lead to dissatisfaction and even purchase abandonment. Also, clothing can be seen as means of status and age, conveying meanings and allowing visual identification of the class and age of the wearer. Moreover, the paper contributes in order to instruct managers and training teams.

  10. Clothing Flammability and Burn Injuries: Public Opinion Concerning an Overlooked, Preventable Public Health Problem.

    Science.gov (United States)

    Frattaroli, Shannon; Spivak, Steven M; Pollack, Keshia M; Gielen, Andrea C; Salomon, Michele; Damant, Gordon H

    2016-01-01

    The objective of this study was to describe knowledge of clothing flammability risk, public support for clothing flammability warning labels, and stronger regulation to reduce the risk. As part of a national survey of homeowners about residential sprinkler systems, the authors included questions about clothing flammability. The authors used an online web panel to sample homeowners and descriptive methods to analyze the resulting data. The sample included 2333 homeowners. Knowledge of clothing flammability and government oversight of clothing flammability risk was low. Homeowners were evenly split about the effectiveness of current standards; however, when presented with clothing-related burn injury and death data, a majority (53%) supported stricter standards. Most homeowners (64%) supported warning labels and indicated that such labels would either have no effect on their purchasing decisions (64%) or be an incentive (24%) to purchase an item. Owners of sprinkler-equipped homes were more likely to support these interventions than owners of homes without sprinkler systems. Public knowledge about clothing flammability risks is low. Most homeowners supported clothing labels to inform consumers of this risk and increased government intervention to reduce the risk.

  11. Imported Second-Hand Clothes in South Korea: An Examination of Guje Clothing as an Autonomous Consumer Practice

    OpenAIRE

    Hong, Jiyeon

    2009-01-01

    This thesis considers issues of individual's 'style competence' within global order. Guje (imported second-hand garments) fashion in South Korea is an ideal case study from which to examine consumer autonomy in the adoption of this Western vintage fashion trend since the 1990s. The importance of guje clothing lies in the local-cultural discrimination between the 'imported' and the local second-hand garments; guje clothes have been considered far more fashionable than the locally generated ...

  12. Mud cloth from Mali: its making and use

    African Journals Online (AJOL)

    Owner

    book covers and wrapping paper. ... used in mud cloth can be traced back to the 12th cen- tury AD ... cluded a bogolan wrap in his winter collection (Adire .... Stencils made from cardboard or plastic are also used. These stencilled cloths can be ...

  13. "I Am Only Ten Years Old": Femininities, Clothing-Fashion Codes and the Intergenerational Gap of Interpretation of Young Girls' Clothes

    Science.gov (United States)

    Rysst, Mari

    2010-01-01

    Based in experience-near anthropology, this article explores constructions of gender by 10-year-old Norwegian girls who are informed by a developmental discourse and by new clothing-fashion codes. The analysis reveals gaps in aesthetic understanding between the clothing-fashion industry, preteen girls and older generations. The industry seems to…

  14. 0KG: creating and developing an innovative clothing service

    Science.gov (United States)

    Bernardes, J. P.; Nogueira, M.

    2017-10-01

    This paper explores the creation, analysis and understanding of the feasibility and potential of an innovative service called 0KG, which focuses on the question: “are people willing to use second-hand clothing and/or leased when traveling?”. 0KG is a rental service for the day-to-day, business, and also cultural clothing, depending on the country where tourists are traveling. The main benefit of this service is to be a facilitator in the traveling moment, allowing displacements to be made with greater tranquility, without concern for the luggage and still offering a varied range of clothes to use that normally tourists would not have in their closet. Inspired by the ‘slow fashion movement’, 0KG intends to be an inovation promoting the re-use of clothes. The creation and development of this service happened through the use of various methodologies, such as design thinking and business models. The analysis to these methodologies allows an explanation of 0KG through a process of design thinking and the creation of a business model called Kaleidoscope. Regarding its validation, it was achieved in the format of a questionnaire with 430 responses and a focus group with people of interest. Finally, the paper culminates with the positive response to the problem.

  15. EFFECT OF MIX MARKETING ON RE–PURCHASE DECISION OF MUSLIM DRESS IN BOGOR (MUSLIM CLOTHING PRODUCT OF KEKE

    Directory of Open Access Journals (Sweden)

    Indarto Setiawan

    2016-09-01

    Full Text Available The main objective of this study was to analyze the factors that determines consumers in their purchasing decisions Muslim dress and recommend the proposed marketing mix strategy affects customer satisfaction and loyalty which can have an impact on purchasing decisions / repurchase (repurchase by consumers. The analytical methods used in this study Chi-Square Test, Thurstone Case-V Analysis, Correspondence Analysis, and Structural Equation Model. The results showed the purchasing decisions Muslim clothing there is a relationship between level of education and average revenue / expenditure per month with custom usage Muslim clothing, there are five sequences attribute Muslim clothing that is essential according to the respondents, the underwear model, quality of materials, patterns typical, leisure time used as well as an attractive packaging design. Muslim clothing brand Ke'ke is purchased by consumers because the ads fit the facts, reasonably priced, there are many models of quality koko and containerized, while shortcomings are in the variation of the veil / hijab and less spread of sales outlets. The products are very dominant. They influence purchasing decisions of consumers so that the superiority of the product should be maintained and even improved.Keywords: muslim clothing, the mix marketing, re-purchasing decisions

  16. Reviewing the Effect of Religion, Materialism and Demographic Features of the Consumer on Mental Involvement in Fashion Clothing (Case Study: Yazd

    Directory of Open Access Journals (Sweden)

    Seyed Mahdi Alhosseini Almodarresi

    2015-12-01

    Full Text Available Among the factors that are necessary to facilitate the consumer’s daily life with high mental involvement, fashion clothing is an important and significant factor for many consumers. According to the importance of the subject, this research reviewed the effect of religion, materialism and demographic features of the consumer on mental involvement in fashion clothing among citizens of Yazd. Confirmatory factor analysis method has been applied in analytical statistics of this research to determine the role and position of each one of the research elements by using Amos software. Correlation test has been used in order to review the relations between fashion clothing involvement and its dimensions, and linear regression test in order to determine the effect manner of involvement in fashion clothing and mental knowledge on confidence in fashion decision making. The statistical population includes all the individuals above 20 years old in Yazd City; the sample size was calculated 99 individuals by using Cochran formula. The research results showed that religion and materialism have significant effect on mental involvement in fashion clothing and involvement has a positive and significant effect on fashion decision making confidence. Furthermore, mental involvements in fashion clothing and mental knowledge have a positive and significant effect on fashion decision making confidence and it was specified in the reviewing of the relation between demographic factors (sex, age,… and the studied variables that the correlation between them was not significant even in the confidence level of 95 percent.

  17. An operator training simulator based on interactive virtual teleoperation: nuclear facilities maintenance applications

    International Nuclear Information System (INIS)

    Kim, Ki Ho; Kim, Seung Ho

    1997-01-01

    Remote manipulation in nuclear hazardous environment is very often complex and difficult to operate and requires excessively careful preparation. Remote slave manipulators for unstructured work are manually controlled by a human operator. Small errors made by the operator via the master manipulator during operation can cause the slave to be surffered from excessive forces and result in considerable damages to the slave iteself and its environment. In this paper, we present a prototype of an operator training simulator for use in nuclear facilities maintenance applications, as part of the ongoing Nuclear Robotics Development Program at Korea Atomic Energy Research Institute (KAERI). The operator training simulator provides a means by which, in virtual task simulation, the operator can try out and train for expected remote tasks that the real slave manipulator will perform in advance. The operator interacts with both the virtual slave and task environment through the real master. Virtual interaction force feedback is provided to the operator. We also describe a man-in-the loop control scheme to realize bilateral force reflection in virtual teleoperation

  18. The Employment Challenge of the Agreement on Textiles and Clothing: Scenario and Strategies for Pakistan

    NARCIS (Netherlands)

    K.A. Siegmann (Karin Astrid)

    2005-01-01

    textabstractAbstract In January 2005, the quota system for imports of textiles and clothing was phased out and gave way to more liberalized global trade in textiles and clothing. The T&C industry is Pakistan’s main export engine. It is also a major industrial employer, and one of the few sectors

  19. Exercise clothing and shoes

    Science.gov (United States)

    ... form-fitting, stretchy clothing for activities like: Running Biking Advanced yoga/Pilates Swimming You may be able ... A.D.A.M. Editorial team. Related MedlinePlus Health Topics Exercise and Physical Fitness Browse the Encyclopedia ...

  20. Lineup identification by children: effects of clothing bias.

    Science.gov (United States)

    Freire, Alejo; Lee, Kang; Williamson, Karen S; Stuart, Sarah J E; Lindsay, R C L

    2004-06-01

    This study examined effects of clothing cues on children's identification accuracy from lineups. Four- to 14-year-olds (n = 228) saw 12 video clips of individuals, each wearing a distinctly colored shirt. After watching each clip children were presented with a target-present or target-absent photo lineup. Three clothing conditions were included. In 2 conditions all lineup members wore the same colored shirt; in the third, biased condition, the shirt color of only one individual matched that seen in the preceding clip (the target in target-present trials and the replacement in target-absent trials). Correct identifications of the target in target-present trials were most frequent in the biased condition, whereas in target-absent trials the biased condition led to more false identifications of the target replacement. Older children were more accurate than younger children, both in choosing the target from target-present lineups and rejecting target-absent lineups. These findings suggest that a simple clothing cue such as shirt color can have a significant impact on children's lineup identification accuracy.

  1. Effect of cold conditions on manual performance while wearing petroleum industry protective clothing.

    Science.gov (United States)

    Wiggen, Øystein Nordrum; Heen, Sigri; Færevik, Hilde; Reinertsen, Randi Eidsmo

    2011-01-01

    The purpose of this study was to investigate manual performance and thermal responses during low work intensity in persons wearing standard protective clothing in the petroleum industry when they were exposed to a range of temperatures (5, -5, -15 and -25℃) that are relevant to environmental conditions for petroleum industry personnel in northern regions. Twelve men participated in the study. Protective clothing was adjusted for the given cold exposure according to current practices. The subjects performed manual tests five times under each environmental condition. The manual performance test battery consisted of four different tests: tactile sensation (Semmes-Weinstein monofilaments), finger dexterity (Purdue Pegboard), hand dexterity (Complete Minnesota dexterity test) and grip strength (grip dynamometer). We found that exposure to -5℃ or colder lowered skin and body temperatures and reduced manual performance during low work intensity. In conclusion the current protective clothing at a given cold exposure is not adequate to maintain manual performance and thermal balance for petroleum workers in the high north.

  2. On the road toward the development of clothing size standards and safety devices for Chilean workers.

    Science.gov (United States)

    Oñate, Esteban; Meyer, Felipe; Espinoza, Jorge

    2012-01-01

    The range of sizes used in Chile for clothing comes from criteria developed in continental Europe, mainly the EN 13402 standard. Any standard adopted by a country should consider the anthropometric dimensions of the user population, particularly to discern the ratio of garments for different size. Consequently, the purpose of this study was to propose standards for the size of clothing based on anthropometric characteristics of a sample of Chilean miners. The study was conducted in 447 male workers. The age and body weight were measured in each workers as well as their percentage of body fat. Anthropometric measurements for garments were made according to the criteria of the European Community (EN 13402-1) and ISO (8559- 1989). Body dimensions for the design of gloves, shoes, helmets and caps, clothes that cover the upper part of the body and clothes that cover the lower part were measured. The results obtained made it possible to establish the percentage of workers falling within the range of sizes that manufacturers consider as reference. One of the main conclusions of the study is the need to carefully consider a set of complementary anthropometric measures, which can help to improve the comfort of costumes, to the extent that the providers adapt their designs to the characteristics of Chilean workers.

  3. Design of therapeutic clothing for sensory stimulation of children with psychomotor delay.

    Science.gov (United States)

    Pires, Ângela; Miguel, Rui

    2012-01-01

    This research work was based on an experimental concept of functional clothing for children with psychomotor development limitations. No matter the analyzed pathology, all these children need sensorial stimulation because of their psychomotor difficulties, especially at fine motor skills level. The main objective was to develop functional and comfortable clothing with sensorial stimulation elements (colours, textures, fragrances, sounds, etc.). It is intended, on the one hand, to increase the autonomy of the children in what concerns the act of dressing/undressing and, on the other hand, to stimulate their learning, coordination and self-esteem. A study about the specific needs of these children concerning clothing was worked out, which consisted in inquiring their parents and therapists. Based on the inquiries results, bibliographic revision in the area of therapeutic/ interactive clothing and analysis of didactic and therapeutic material catalogues we developed a clothing prototype (sweat-shirt). The prototype was then tested by the children of the study sample and the test results were, once again, explained by the parents through the fulfilling of a prototype evaluation inquiry. This study supplied some important conclusions, more directed to the confirmation of the theme significance and to the definition of a methodology to be used in future research.

  4. Form factors and related quantities in clothed-particle representation

    Directory of Open Access Journals (Sweden)

    Shebeko Alexander

    2017-01-01

    Full Text Available We show new applications of the notion of clothed particles in quantum field theory. Its realization by means of the clothing procedure put forward by Greenberg and Schweber allows one to express the total Hamiltonian H and other generators of the Poincaré group for a given system of interacting fields through the creation (annihilation operators for the so-called clothed particles with physical (observed properties. Here such a clothed particle representation is used to calculate the matrix elements (shortly, form factors of the corresponding Nöther current operators sandwiched between the H eigenstates. Our calculations are performed with help of an iterative technique suggested by us earlier when constructing the NN → πNN transition operators. As an illustration, we outline some application of our approach in the spinor quantum electrodynamics.

  5. On virtual displacement and virtual work in Lagrangian dynamics

    International Nuclear Information System (INIS)

    Ray, Subhankar; Shamanna, J

    2006-01-01

    The confusion and ambiguity encountered by students in understanding virtual displacement and virtual work is discussed in this paper. A definition of virtual displacement is presented that allows one to express them explicitly for holonomic (velocity independent), non-holonomic (velocity dependent), scleronomous (time independent) and rheonomous (time dependent) constraints. It is observed that for holonomic, scleronomous constraints, the virtual displacements are the displacements allowed by the constraints. However, this is not so for a general class of constraints. For simple physical systems, it is shown that the work done by the constraint forces on virtual displacements is zero. This motivates Lagrange's extension of d'Alembert's principle to a system of particles in constrained motion. However, a similar zero work principle does not hold for the allowed displacements. It is also demonstrated that d'Alembert's principle of zero virtual work is necessary for the solvability of a constrained mechanical problem. We identify this special class of constraints, physically realized and solvable, as the ideal constraints. The concept of virtual displacement and the principle of zero virtual work by constraint forces are central to both Lagrange's method of undetermined multipliers and Lagrange's equations in generalized coordinates

  6. Protective clothing based on permselective membrane carbon adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Gottschlich, D.; Baker, R. [Membrane Technology and Research, Inc., Menlo Park, CA (United States)

    1995-10-01

    The objective of the program is to develop improved protective clothing for use by workers engaged in decommissioning and decontamination of former Department of Energy sites, including those used for atomic weapons research and production. Such sites are contaminated with a variety of hazardous compounds, ranging from asbestos, mercury and other heavy metals, to toxic organic compounds, such as PCB and chlorinated solvents, and radioactive metals and salts. Because of the hazards of exposure to these materials, workers must wear protective garments. These garments, which are made from Saran{reg_sign}, butyl rubber or other impermeable materials, provide excellent protection against particulates, liquids, aerosols, organic vapors and gases, but are impermeable to water vapor. Consequently, humidity and temperature within the suit rise rapidly during use, causing increasing discomfort. Heat stress occurs if the suit is worn for more than brief periods without resting. The proposed technology concerns a new protective clothing fabric that combines a permselective membrane layer with a sorptive layer. If successfully developed, suits made from this fabric will offer equivalent, or better, protection than current materials, combined with a very high water vapor transmission rate (1,000 g/m{sup 2}{sm_bullet} day or more) that will dramatically improve {open_quotes}breathability,{close_quotes} comfort, and worker productivity.

  7. Protective clothing based on permselective membrane carbon adsorption

    International Nuclear Information System (INIS)

    Gottschlich, D.; Baker, R.

    1995-01-01

    The objective of the program is to develop improved protective clothing for use by workers engaged in decommissioning and decontamination of former Department of Energy sites, including those used for atomic weapons research and production. Such sites are contaminated with a variety of hazardous compounds, ranging from asbestos, mercury and other heavy metals, to toxic organic compounds, such as PCB and chlorinated solvents, and radioactive metals and salts. Because of the hazards of exposure to these materials, workers must wear protective garments. These garments, which are made from Saran reg-sign, butyl rubber or other impermeable materials, provide excellent protection against particulates, liquids, aerosols, organic vapors and gases, but are impermeable to water vapor. Consequently, humidity and temperature within the suit rise rapidly during use, causing increasing discomfort. Heat stress occurs if the suit is worn for more than brief periods without resting. The proposed technology concerns a new protective clothing fabric that combines a permselective membrane layer with a sorptive layer. If successfully developed, suits made from this fabric will offer equivalent, or better, protection than current materials, combined with a very high water vapor transmission rate (1,000 g/m 2 sm-bullet day or more) that will dramatically improve open-quotes breathability,close quotes comfort, and worker productivity

  8. Knowledge sharing in virtual communities: A social exchange theory perspective

    Directory of Open Access Journals (Sweden)

    Li Jinyang

    2015-01-01

    Full Text Available Purpose: The author tried to identify the knowledge sharing behaviors on the internet, using structural equation modeling methods, proposing a model based on social exchange theory in which share willingness, trust, reciprocity, altruism tended to have impact on people’s knowledge sharing behaviors in virtual communities. Design/methodology/approach: We presented an empirical research which integrated social exchange theory and structural equation modeling methods to analyze several important factors influencing members’ knowledge sharing behaviors in virtual communities. Findings: We analyzed the knowledge sharing behaviors in virtual communities. We found that members’ altruism can not predict knowledge sharing behaviors. We also found that members’ sharing willingness is the most important factor on virtual community knowledge sharing behaviors compared with trust, reciprocity and altruism. Originality/value: From the perspective of social exchange theory, we did empirical test and verified the proposed research model by using structural equation modeling methods. Our finding can help recognize people’s incentive about knowledge sharing.

  9. Study on virtual instrument developing system based on intelligent virtual control

    International Nuclear Information System (INIS)

    Tang Baoping; Cheng Fabin; Qin Shuren

    2005-01-01

    The paper introduces a non-programming developing system of a virtual instrument (VI), i.e., a virtual measurement instrument developing system (VMIDS) based on intelligent virtual control (IVC). The background of the IVC-based VMIDS is described briefly, and the hierarchical message bus (HMB)-based software architecture of VMIDS is discussed in detail. The three parts and functions of VMIDS are introduced, and the process of non-programming developing VI is further described

  10. Study on virtual instrument developing system based on intelligent virtual control

    Energy Technology Data Exchange (ETDEWEB)

    Tang Baoping; Cheng Fabin; Qin Shuren [Test Center, College of Mechanical Engineering, Chongqing University , Chongqing 400030 (China)

    2005-01-01

    The paper introduces a non-programming developing system of a virtual instrument (VI), i.e., a virtual measurement instrument developing system (VMIDS) based on intelligent virtual control (IVC). The background of the IVC-based VMIDS is described briefly, and the hierarchical message bus (HMB)-based software architecture of VMIDS is discussed in detail. The three parts and functions of VMIDS are introduced, and the process of non-programming developing VI is further described.

  11. Astronaut Clothing for Exploration Missions

    Science.gov (United States)

    Poritz, Darwin H.; Orndoff, Evelyne; Kaspranskiy, Rustem R.; Schesinger, Thilini; Byrne, Vicky

    2016-01-01

    Astronaut clothes for exploration missions beyond low Earth orbit need to satisfy several challenges not met by the currently-used mostly-cotton clothing. A laundering system is not expected to be available, and thus soiled garments must be trashed. Jettisoning waste does not seem feasible at this time. The cabin oxygen concentration is expected to be higher than standard, and thus fabrics must better resist ignition and burning. Fabrics need to be identified that reduce logistical mass, that can be worn longer before disposal, that are at least as comfortable as cotton, and that resist ignition or that char immediately after ignition. Human factors and psychology indicate that crew well-being and morale require a variety of colors and styles to accommodate personal identity and preferences. Over the past four years, the Logistics Reduction Project under NASA's Advanced Exploration Systems Program has sponsored the Advanced Clothing System Task to conduct several ground studies and one ISS study. These studies have evaluated length of wear and personal preferences of commercially-available exercise- and routine-wear garments made from several fabrics (cotton, polyester, Merino wool, and modacrylic), woven and knitted. Note that Merino wool and modacrylic char like cotton in ambient air, while polyester unacceptably melts. This paper focuses on the two components of an International Space Station study, onboard and on the ground, with astronauts and cosmonauts. Fabrics were randomized to participants. Length of wear was assessed by statistical survival analysis, and preference by exact binomial confidence limits. Merino wool and modacrylic t-shirts were worn longer on average than polyester t-shirts. Interestingly, self-assessed preferences were inconsistent with length-of-wear behavior, as polyester was preferred to Merino wool and modacrylic.

  12. Localised boundary air layer and clothing evaporative resistances for individual body segments.

    Science.gov (United States)

    Wang, Faming; del Ferraro, Simona; Lin, Li-Yen; Sotto Mayor, Tiago; Molinaro, Vincenzo; Ribeiro, Miguel; Gao, Chuansi; Kuklane, Kalev; Holmér, Ingvar

    2012-01-01

    Evaporative resistance is an important parameter to characterise clothing thermal comfort. However, previous work has focused mainly on either total static or dynamic evaporative resistance. There is a lack of investigation of localised clothing evaporative resistance. The objective of this study was to study localised evaporative resistance using sweating thermal manikins. The individual and interaction effects of air and body movements on localised resultant evaporative resistance were examined in a strict protocol. The boundary air layer's localised evaporative resistance was investigated on nude sweating manikins at three different air velocity levels (0.18, 0.48 and 0.78 m/s) and three different walking speeds (0, 0.96 and 1.17 m/s). Similarly, localised clothing evaporative resistance was measured on sweating manikins at three different air velocities (0.13, 0.48 and 0.70 m/s) and three walking speeds (0, 0.96 and 1.17 m/s). Results showed that the wind speed has distinct effects on local body segments. In contrast, walking speed brought much more effect on the limbs, such as thigh and forearm, than on body torso, such as back and waist. In addition, the combined effect of body and air movement on localised evaporative resistance demonstrated that the walking effect has more influence on the extremities than on the torso. Therefore, localised evaporative resistance values should be provided when reporting test results in order to clearly describe clothing local moisture transfer characteristics. Localised boundary air layer and clothing evaporative resistances are essential data for clothing design and assessment of thermal comfort. A comprehensive understanding of the effects of air and body movement on localised evaporative resistance is also necessary by both textile and apparel researchers and industry.

  13. 48 Clothing Problems of Upper Middle Socio-Economic Group ...

    African Journals Online (AJOL)

    Nekky Umera

    maintaining an interest in fashion and looking young, influence of the media and price .... women are responsible for 83% of all consumer clothing purchases. Clothing is ..... promotional tactics to appeal to this market. ... decision-making styles.

  14. Study of Quilted Fabrics Used in Outdoor Clothing

    Directory of Open Access Journals (Sweden)

    Malgorzata Matusiak

    2017-12-01

    Full Text Available Quilted fabrics are more and more frequently used in outdoor clothing, especially jackets. They are usually composed of two or three layers connected together by sewing or thermal quilting. They are characterised by different properties, depending on the structure of the quilted fabrics. In the presented work, five variants of quilted fabrics were studied in terms of of their comfort-related properties, such as thermal resistance, thermal conductivity, thermal absorptivity, water-vapour resistance and air permeability. On the basis of the results, it was possible to assess the quilted fabrics from the point of view of their usability for outdoor clothing.

  15. New technologies, virtual reality and multimedia, in Radiation Protection training; Nuevas tecnologias, realidad virtual y multimedia, aplicadaas a la formacion en proteccion radiologica

    Energy Technology Data Exchange (ETDEWEB)

    Felipe, A.; Sanchez-Mayoral, M. L.; Lamela, B.; Merino, A.; Sarti, F.

    2003-07-01

    Iberdrola Ingenieria y Consultoria (Iberinco) has developed some computer applications based in New Technologies, Virtual Reality and Multimedia, with the aim to optimise the formation and training of professionally exposed workers as well as to inform the public. The use of the new technologies could be an important help for the workers training. Virtual Reality Projects developed by Iberinco are: a) CIPRES: Interactive Calculations of Radiological Protection in a Simulation Environmental and, b) ACEWO: Workers Control Access to Nuclear Power Plants, virtual Reality could be directly applicable to several aspects related with Radiological Protection Training, for example. An application that workers could used to learn the main aspects of Radiological Protection related with: a) Physical concepts, b) Regulations, c) Use of protective clothing, d) Access into and exit out controlled areas, e) ALARA criterion. An examples is the project ACEWO. A training program based on Virtual Reality systems with simulations of procedures in which the operators could receive high doses. In this way, the operation time and dose could be minimised according to the ALARA criterion owing to the ability of repeating the exercise, or the work, as many times as be necessary, like project CIPRES. Iberinco has been developed an educational CD multimedia on nuclear energy and the protection measures foreseen in the emergency plans for the Spanish Civil Protection Agency, with the aim of being distributed to all the schools placed near a nuclear power plant. (Author) 4 refs.

  16. Temperature feedback in virtual environments

    Science.gov (United States)

    Dionisio, Jose

    1997-02-01

    Virtual reality (VR) is known as one of the most exciting computer-related technologies. Although its definition is still vague among experts, it is expected that a VR system should give the user an experience of being 'immersed' in a synthesized environment. Aims of this deeper level of user immersion range from the look-like of the scenes where realistic rendering is one of the goals (vision stimulus), to interaction paradigms through the use of, e.g., dataglove peripherals type, to acoustics (earring stimulus) trying to merge as much as possible the human senses towards the desired immersion. Attempting to increase the previously mentioned realism, an extra sensorial perception is recalled and the user is exposed to the feeling of 'virtual comfort' by means of a new parameter: the temperature. The obtained results concentrate on interaction paradigms and couple input/output feedback, emphasizing the factor 'presence.' The prototype, although conceptually simple, brings together within a couple of virtual scenarios, a software/hardware solution, so far original in this field.

  17. An Investigation of Self-Concept, Clothing Selection, and Life Satisfaction among Disabled Consumers

    Science.gov (United States)

    Chang, Hyo Jung

    2012-01-01

    This dissertation investigates the relationships between various aspects of self-concept (i.e., generalized self-efficacy, public self-consciousness, state hope, and self-esteem), clothing selection (i.e., clothing that expresses individuality, clothing that improves the emotional state, clothing that camouflages the body), and life satisfaction…

  18. [Research and design for optimal position of electrocardio-electrodes in monitoring clothing for men].

    Science.gov (United States)

    Liang, Lijun; Hu, Yao; Liu, Hao; Li, Xiaojiu; Li, Jin; He, Yin

    2017-04-01

    In order to reduce the mortality rate of cardiovascular disease patients effectively, improve the electrocardiogram (ECG) accuracy of signal acquisition, and reduce the influence of motion artifacts caused by the electrodes in inappropriate location in the clothing for ECG measurement, we in this article present a research on the optimum place of ECG electrodes in male clothing using three-lead monitoring methods. In the 3-lead ECG monitoring clothing for men we selected test points. Comparing the ECG and power spectrum analysis of the acquired ECG signal quality of each group of points, we determined the best location of ECG electrodes in the male monitoring clothing. The electrode motion artifacts caused by improper location had been significantly improved when electrodes were put in the best position of the clothing for men. The position of electrodes is crucial for ECG monitoring clothing. The stability of the acquired ECG signal could be improved significantly when electrodes are put at optimal locations.

  19. Efeito de alguns curares naturais e da d-Tubocurarina retardando o tempo de coagulação e o tempo de protombina do sangue humano Natural curares and d-Tubocuratine effects on human blood clothing time and prothrombine time

    Directory of Open Access Journals (Sweden)

    João Canali

    1967-01-01

    Full Text Available In this paper the author points out to a old question of about 200 years ago in wich two kinds of opinions were discussed. BANCROFT and FONTANA in one hand atributes for the Indian arrow poison (curare the propriety of uncoagulate the blood, and C. BEBNAHDJ, B. RODRIGUES and others made an contradictory opinion upon this subject. In our experiments, we utilized 4 curares samples from indians who lives near the Brazilian border at Colombia, the famous Ticunas poison, and the alkaloid d-Tubocurarine. These poisons were added in form of emulsion in saline to the blood and blood plasma in order to perform two kinds of experiments. In one serie of experiments we observed the effect of curare on human blood coagulation time according to LEE-WHITE technic puting 0.5 ml of the various poisons emulsions previously into the tube. By this method, we have found that the emulsion containing 0.1 g of the poison in 10 ml saline was the most effective (Table II, therefore we used this curare emulsion concentration in the other serie of experiments, in which we tested the action of these venoms on the human blood plasma prothrombins time, (Quick Technic adding 0.1 ml of the saline poison emulsion to each 0.1 ml of human blood plasma. Results from these experiments can be seen on Table II. These experiments we have tried on one sample of human blood plasma plus the differents curares samples; and in another opportunity four samples of human blood plasma were tried with the curare from Ticunas indians (the most effective in this respect. Results from these experiments may be seen on Table III. All the poison tried in our experiments was previously tested on toads legs (B. crucifer to verify his curares action. All times obtained with the experiments above, show highly significant results (P<001 when compared with the blood and blood plasma mixed with in the same volume of saline. Our results, point out that BANCROFT and FONTANA views upon the effect of curare on

  20. Acoustic Virtual Reality – Methods and challenges

    DEFF Research Database (Denmark)

    Pind Jörgensson, Finnur Kári; Jeong, Cheol-Ho; Llopis, Hermes Sampedro

    2018-01-01

    and acoustics into the virtual reality sphere adds another dimension to the experience. It both makes the immersion more believable, and in the context of building design, makes it easy and intuitive to try out different acoustic designs and soundscapes. In traditional auralization, although a very powerful...

  1. [MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Consumer Approach Strand: Textiles and Clothing. Module I-D-4: Applications and Implications of New Technology in Textiles and Clothing.

    Science.gov (United States)

    Joseph, Marjory

    This competency-based preservice home economics teacher education module on applications and implications of new technology in textiles and clothing is the fourth in a set of four modules on consumer education related to textiles and clothing. (This set is part of a larger series of sixty-seven modules on the Management Approach to Teaching…

  2. Fashion marketing in textile and clothing industry

    Directory of Open Access Journals (Sweden)

    Alica Grilec Kaurić

    2009-12-01

    Full Text Available Fashion marketing explores connection between fashion design and marketing including development, promotion, sales and price aspects of fashion industry. Successful fashion marketing managers are aware that the most important fashion marketing elements are customer trend identification, building strong brands and creating positive image of the producers. This paper presents the findings of a research conducted for the purpose of identifying trends in marketing sector in textile and clothing industry in Croatia. The research was conducted through personal interviews with marketing and company managers in Croatia. The research identified that marketing is insufficiently implemented in Croatian textile and clothing industry, despite growing brand management importance. However, because of lack in marketing knowledge and bad brand management, development of fashion brand is the most critical factor in successful business activity in textile and clothing industry.

  3. Working- and protecting clothes and their ranges of application

    International Nuclear Information System (INIS)

    Peter, H.

    1981-01-01

    Due to the greatly diverse conditions of application working and protection clothes have to satisfy manifold requirements. The author outlines the usual method with the aim to characteristic material- and processing properties loading to article properties that correspond to the requested safety characteristic values (test standards). The qualification criteria deciding the respective field of application are described in detail (e.g. mining, building trade, chemical industry, radiation protection etc.) and are completed by giving comments on the care of clothing. (orig.) [de

  4. Effects of skin pressure by clothing on digestion and orocecal transit time of food.

    Science.gov (United States)

    Sone, Y; Kato, N; Kojima, Y; Takasu, N; Tokura, H

    2000-05-01

    In order to reveal the influence of clothing skin pressure on digestion of food through the gastrointestinal tract, we examined the absorption of dietary carbohydrate and orocecal transit time of a test meal by means of a breath hydrogen test on 7 healthy young women. In this experiment, we collected breath samples from the participants wearing loose-fitting experimental garment on the second day of the experiment and from the same participants but wearing an additional tight-fitting girdle on the following day for 16 hours and 9 hours, respectively. Skin pressure applied by a girdle on participant's waist, abdomen and hip region was 15.5 +/- 0.4 mmHg (mean +/- SE), 11.0 +/- 0.2 mmHg, and 13.6 +/- 0.6 mmHg, respectively, and the values were 2-3 times larger than those of the experimental garment. The hydrogen concentration vs. time curve showed that breath hydrogen levels at its peaks (15:00, 15:30, 16:00, 16:30, and 17:00 hr) on the third day of the experiment were significantly higher than those of the corresponding time on the second day (p clothing condition (p hand, the transit time of the test meal for the subjects wearing a girdle did not differ significantly from that for the subjects wearing the garment of less pressure (270 +/- 18 minutes and 263 +/- 21 minutes, respectively). These results indicate that the clothing skin pressure has an inhibitory effect on the absorption of dietary carbohydrate in the small intestine, but no effect on the orocecal transit time of a meal.

  5. In-depth assessment of the situation of the textile and clothing sector in the EU and prospects : Task 7: synthesis report for the European textile and clothing sector

    NARCIS (Netherlands)

    Scheffer, M.R. (Michiel)

    2012-01-01

    The in-depth assessment of the situation of the European textile and clothing sector is composed by six independent reports with a close focus on key aspects useful to understand the dynamics and the development of the textile and clothing industry, drivers of change – most notably the impact

  6. A Methodological Approach to the Materiality of Clothing

    DEFF Research Database (Denmark)

    Klepp, Ingun Grimstad; Bjerck, Mari

    2014-01-01

    The material is not just ‘a carrier’ of different types of symbols, but an active element in the practices. Bringing this to the fore requires new research methods. This article discusses a methodological approach, we call it a wardrobe study, which allows for the analysis of the way in which...... clothes relate to each other on the whole or within parts of the wardrobe. More specifically, we discuss how this method can contribute to increasing the materiality of clothes studies. The theoretical point of departure for this approach is a practice theory in which the material enters as an integral...

  7. Textiles and clothing sustainability nanotextiles and sustainability

    CERN Document Server

    2017-01-01

    This book highlights the sustainability aspects of textiles and clothing sector in light of nanomaterials and technologies. The invasion of nano in every industrial sector has been important and has made remarkable changes as well as posed new challenges, including the textiles and clothing sector. There is quite a great deal of research happening in terms of nano materials for textiles across the globe, some of which are covered in this book. .

  8. The Influence of Textile Materials Mechanical Properties upon Virtual Garment Fit

    Directory of Open Access Journals (Sweden)

    Kristina ANCUTIENĖ

    2011-07-01

    Full Text Available 3D virtual representation of garment provides high potential for design, product development and marketing processes, especially in mass customization strategies implementation. Clothing industry rapidly turns to virtual simulation which not only presents realistic 3D view of garment but also simulates mechanical behaviour of materials. 3D CAD systems can be used to define strain distribution in virtual garment which describes garment fit without actually producing the garment. Strain and distance ease between body and garment depends not only upon body measurements and garment construction, but also on mechanical and structural properties of selected material. The aim of this research was to investigate virtual garment fit using "Modaris 3D Fit" (Lectra software subjected to fabrics mechanical (tensile, bending, shear and structural (composition, thickness, area density properties investigating strain distribution in garment and distance ease between garment and human body. It was defined that for diagonal cut garments the highest influence upon garment fit has fabric tensile properties in weft direction. The highest influence is obtained at high distance ease and small strain values zones and at negative distance ease and high strain values zones. Therefore, presented method could be used for tight-fitted garments also for garments with draperies on purpose to investigate garment fit upon fabrics used.http://dx.doi.org/10.5755/j01.ms.17.2.486

  9. Evaluation of gunshot residue (GSR) evidence: Surveys of prevalence of GSR on clothing and frequency of residue types.

    Science.gov (United States)

    Hannigan, Thomas J; McDermott, Sean D; Greaney, Claire M; O'Shaughnessy, John; O'Brien, Cliona M

    2015-12-01

    The evaluative approach is a logical approach to interpreting scientific findings in criminal cases, applying knowledge regarding the transfer, persistence and recovery of particulate material. The application of this approach to interpreting the finding of gunshot residue on the clothing of a suspect requires knowledge of background levels of GSR on clothing and on the frequency of different residue types in a particular environment. The cuffs of 100 upper outer garments submitted to a forensic laboratory in connection with non-firearms offences were sampled for gunshot residue. No 3-component lead/antimony/barium particles were found on 98 of them. Two 3-component particles were found on one of them and one 3-component particle was found on another. The frequency of occurrence of various particle types regarded as consistent with GSR was also explored. The findings show that, while 3-component particles were somewhat more likely to be encountered by chance on clothing than on hands, they are still relatively uncommon events. To investigate the frequency of occurrence of particular residue types, 100 discharged rounds of ammunition recovered at crime scenes were sampled and the types of residue present were determined. The results show that some residue types are significantly more common than others. Both sets of data will be of value in evaluating the significance of finding GSR on clothing of suspects in criminal cases. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  10. Dermal uptake of phthalates from clothing: comparison of model to human participant results

    DEFF Research Database (Denmark)

    Morrison, Glenn; Weschler, Charles J.; Bekö, Gabriel

    2016-01-01

    In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethylphthalate (DEP) and di-n-butylphthalate (DnBP) than a previous model. It also demonstrates that uptake...... is sensitive to both the gap between skin and clothing and the time clothing is allowed to adsorb phthalates. The model predictions are consistent with the observation that exposed clothing increases dermal uptake when compared with uptake observed in bare-skin participants. Extension of this model beyond...... the cotton-phthalate system will be challenging until data on partition coefficients are quantified for other combinations of SVOCs, fabric materials and environmental conditions....

  11. Survey of Occupational Allergic Contact Dermatitis and Patch Test among Clothing Employees in Beijing.

    Science.gov (United States)

    Chen, Yu-Xin; Gao, Bing-Ai; Cheng, Hai-Yan; Li, Lin-Feng

    2017-01-01

    Occupational population-based epidemiological data relating to occupational contact allergies in the Chinese clothing industry are limited. To investigate the prevalence of occupational allergic contact dermatitis (OACD) and to identify the causative allergens among clothing employees in China, a cross-sectional study was conducted in 529 clothing employees at 12 clothing factories in Beijing. All employees were subjected to an interview using self-administered questionnaire and skin examination, and those who were diagnosed with occupational contact dermatitis (OCD) were patch tested. In the present survey, we found that the overall 1-year prevalence of OACD among the clothing employees was 8.5%. The 1-year prevalence of OACD among workers (10.8%) was significantly higher than that among managers (3.2%). The lesions were primarily on the hands and wrists in workers, but the face and neck in managers. The major allergens were nickel sulfate and cobalt dichloride in workers and colophony and p -tert-butylphenol formaldehyde resin in managers. In conclusion, workers are at a higher risk of OACD compared with managers in the Chinese clothing industry. In addition to hand dermatitis in workers, airborne contact dermatitis on the face and neck should be also addressed in managers.

  12. Clothing Speaks: 4-H Leader's Guide and 4-H Member's Guide.

    Science.gov (United States)

    Extension Service (USDA), Washington, DC.

    Designed as a group project for boys and girls between the ages of 14 and 17, the informal discussion unit on clothing deals with total appearance (Accessories, hair, make-up, grooming, posture, mannerisms, facial expression, and clothes) and its relationship to self-understanding and one's role in society. The unit is organized into four parts:…

  13. Comparison of Japanese and Chinese Clothing Evaluations by Experts Taking into Account Marketability

    Directory of Open Access Journals (Sweden)

    Kim KyoungOk

    2015-03-01

    Full Text Available To better understand the reasons for the marketability of clothing now designed and sold in China and Japan, we asked Japanese and Chinese experts to evaluate Chinese and Japanese brands of clothing currently for sale in the Japanese market. The marketability of the Chinese apparel items in the Japanese market was evaluated by the Japanese experts. Five Japanese jackets were purchased from a department store in Tokyo, and ten items of Chinese clothing were purchased from a department store in Beijing. Five of the Chinese clothing samples were judged as impossible to sell in Japanese department stores primarily because the sewing quality was incompatible with Japanese requirements, the designs were outdated, and the materials were of low quality. However, the other five Chinese clothing samples received high evaluations of marketability in Japan. We found that Japanese experts focused on general design and sewing finish, while Chinese experts considered more general design points. Thus, our results indicate that clothing is evaluated differently in Japan and China. We conclude that it is necessary to consider the respective evaluation points used in each country as we pursue globalisation.

  14. Chemical vapor deposition of tantalum on graphite cloth for making hot pressed fiber reinforced carbide-graphite composite

    International Nuclear Information System (INIS)

    Hollabaugh, C.M.; Davidson, K.V.; Radosevich, C.L.; Riley, R.E.; Wallace, T.C.

    1977-01-01

    Conditions for the CVD of a uniform coating of Ta on fibers of a woven graphite cloth were established. The effect of gas composition, pressure, and temperature were investigated, and the conditions that gave the desired results are presented. Several layers of the coated cloth were hot pressed to produce a TaC--C composite having uniformly dispersed, fine-grained TaC in graphite. Three compositions were hot pressed: 15, 25, and 40 volume percent carbide. 8 figures, 2 tables

  15. 76 FR 971 - Energy Conservation Program for Consumer Products: Test Procedures for Clothes Dryers and Room...

    Science.gov (United States)

    2011-01-06

    .... Detergent Specifications for Clothes Dryer Test Cloth Preconditioning 5. Changes To Reflect Current Usage... conservation standard; (3) updated detergent specifications for clothes dryer test cloth preconditioning; (4... detergent specifications for clothes dryer test cloth preconditioning; (7) update the references to external...

  16. Study of variability in a virtual wedges A.L.E. Primus, measured weekly, for two years; Estudio de la variabilidad de las cunas virtuales en un A. L. E. Primus, medidas semanalmente, dure dos anos

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Segovia, J.; Ruiz Vazquez, M.; Carrera Magarino, F.

    2011-07-01

    We try to analyze the stability of virtual wedges in the daily control of an electron linear accelerator (ALE), measuring weekly each wedge angle and for the two photon energies available on the machine.

  17. Design and Construction of a Computer Controlled Clothes Washing ...

    African Journals Online (AJOL)

    MICHAEL

    The search for easier and highly efficient ways of washing clothes ... This would help to reduce the running cost. .... It was only necessary to connect to the 8 data lines and the ... is actually a step further into complete automation of the clothes ...

  18. A threat to a virtual hand elicits motor cortex activation.

    Science.gov (United States)

    González-Franco, Mar; Peck, Tabitha C; Rodríguez-Fornells, Antoni; Slater, Mel

    2014-03-01

    We report an experiment where participants observed an attack on their virtual body as experienced in an immersive virtual reality (IVR) system. Participants sat by a table with their right hand resting upon it. In IVR, they saw a virtual table that was registered with the real one, and they had a virtual body that substituted their real body seen from a first person perspective. The virtual right hand was collocated with their real right hand. Event-related brain potentials were recorded in two conditions, one where the participant's virtual hand was attacked with a knife and a control condition where the knife only struck the virtual table. Significantly greater P450 potentials were obtained in the attack condition confirming our expectations that participants had a strong illusion of the virtual hand being their own, which was also strongly supported by questionnaire responses. Higher levels of subjective virtual hand ownership correlated with larger P450 amplitudes. Mu-rhythm event-related desynchronization in the motor cortex and readiness potential (C3-C4) negativity were clearly observed when the virtual hand was threatened-as would be expected, if the real hand was threatened and the participant tried to avoid harm. Our results support the idea that event-related potentials may provide a promising non-subjective measure of virtual embodiment. They also support previous experiments on pain observation and are placed into context of similar experiments and studies of body perception and body ownership within cognitive neuroscience.

  19. Washing of Cloth Contaminated with Radionuclides Using a Detergent-free Laundry System

    Energy Technology Data Exchange (ETDEWEB)

    Yim, Sung Paal

    2005-07-01

    In this study, a new laundry system to wash clothes without using detergent (detergent-free) was applied to wash clothes contaminated with radionuclides at the RWTF of KAERI. If the clothes contaminated with radionuclides and soil decontaminated and cleaned by washing without using detergent, the problem caused by the detergent could be solved naturally. The experiment was performed in two stages. In the first stage, washability of the processed water from the detergent=free laundry system was investigated with regard to its decontamination efficiency for the radionuclides and the detergency for the soil by using the test cloth specimens. In the second stage, real working clothes contaminated with radionuclides from the RWTF were washed by using a laundry machine equipped with a detergent-free system. Decontamination and detergency of the clothes were estimated after washing and the wastewater was also analyzed for its properties.

  20. Protective clothing use at the Savannah River Plant Nuclear Facility

    International Nuclear Information System (INIS)

    Cabbil, C.C.

    1987-01-01

    The mission of the Savannah River Plant in producing nuclear materials does pose some unique protective clothing and equipment requirements not usually seen in the general industry. In addition to protection from the chemicals and physical agents encountered, radioactive hazards must also be managed. This paper describes the protective clothing and respiratory protection used at SRP, and focuses particularly on the development of a new plastic suit. 5 refs., 7 figs., 3 tabs

  1. An assessment of filter aids and filter cloths in the dewatering of intermediate level wastes

    International Nuclear Information System (INIS)

    Knibbs, R.H.; Hudson, B.C.; Blackwell, J.C.W.

    1984-12-01

    This report considers a range of filter cloths and precoat materials intended for use in dewatering intermediate level radioactive wastes, and their interaction when used on a rotary drum vacuum filter. The report outlines the advantages and disadvantages of various grades and types of precoat and shows that grades with permeabilities in the intermediate range, 3 to 4 x 10 -12 m 2 , give satisfactory filtrate quality together with ease of operation. The work on filter cloths shows that: radiation damage is not a limiting factor as regards operational life for any of the cloths examined; polyester-based cloths are unsuitable due to their poor resistance to alkali attack; polyamide cloths are satisfactory; and stainless steel Dutch weave cloths are satisfactory and have the added advantage of high strength. The report also briefly considers the radiation resistance of two elastomeric membranes used on the 'epidermal' filter and shows that the natural latex rubber membrane is considerably more resistant to radiation than the silicone rubber membrane and has an estimated operational life of at least 1200 hours when dewatering Magnox silo sludge or α-contaminated alumino ferric flocs. (author)

  2. New technologies, virtual reality and multimedia, in Radiation Protection training

    International Nuclear Information System (INIS)

    Felipe, A.; Sanchez-Mayoral, M. L.; Lamela, B.; Merino, A.; Sarti, F.

    2003-01-01

    Iberdrola Ingenieria y Consultoria (Iberinco) has developed some computer applications based in New Technologies, Virtual Reality and Multimedia, with the aim to optimise the formation and training of professionally exposed workers as well as to inform the public. The use of the new technologies could be an important help for the workers training. Virtual Reality Projects developed by Iberinco are: a) CIPRES: Interactive Calculations of Radiological Protection in a Simulation Environmental and, b) ACEWO: Workers Control Access to Nuclear Power Plants, virtual Reality could be directly applicable to several aspects related with Radiological Protection Training, for example. An application that workers could used to learn the main aspects of Radiological Protection related with: a) Physical concepts, b) Regulations, c) Use of protective clothing, d) Access into and exit out controlled areas, e) ALARA criterion. An examples is the project ACEWO. A training program based on Virtual Reality systems with simulations of procedures in which the operators could receive high doses. In this way, the operation time and dose could be minimised according to the ALARA criterion owing to the ability of repeating the exercise, or the work, as many times as be necessary, like project CIPRES. Iberinco has been developed an educational CD multimedia on nuclear energy and the protection measures foreseen in the emergency plans for the Spanish Civil Protection Agency, with the aim of being distributed to all the schools placed near a nuclear power plant. (Author) 4 refs

  3. addressing low-literacy in the south african clothing retail environment

    African Journals Online (AJOL)

    user

    of female low-literate clothing consumers in the. South African ... by studying these consumers' behaviour in the clothing retail .... personality, perceptions, learning and attitudes) and external ...... perceived risk, Journal of Fashion Marketing.

  4. The phase-out of second-hand clothing imports: what impact for Tanzania?

    OpenAIRE

    Calabrese, Linda; Balchin, Neil; Mendez-Parra, Maximiliano

    2017-01-01

    The East African Community has begun phasing-out imports of second-hand clothing to promote the development of the domestic garment sector. Using trade data and information obtained from the exporters, this study produces the first estimate of disaggregated imports of second-hand clothing in Tanzania. The net import of used clothing is estimated at over 540 million pieces per year, compared to a domestic production of new clothing of 20 million pieces and import of 177 million pieces of new c...

  5. E-COMMERCE SIDEWALK CLOTHING

    Directory of Open Access Journals (Sweden)

    Dias Ariffiana

    2016-08-01

    Full Text Available E-commerce merupakan aplikasi perdagangan barang atau jasa berbasis web melalui media internet.  Sidewalk Clothing saat ini dalam melakukan proses jual beli masih mengharuskan pembeli dan penjual bertatap muka secara langsung. E-commerce atau yang lebih dikenal dengan toko online memberikan kemudahan dalam melakukan proses jual beli sehingga transaksi jual beli menjadi lebih efektif dan efisien. Hasil yang dicapai dalam pembuatan e-commerce ini adalah mempermudah proses transaksi jual beli tanpa terikat waktu dan tempat. Dengan adanya e-commerce ini pemilik toko dimudahkan dalam memperbaharui informasi mengenai produk yang dijual dan dapat sekaligus meningkatkan penjualan. Pembeli dimudahkan dalam dalam mendapatkan informasi produk yang ditawarkan dan pembeli bisa membeli produk tersebut setiap saat. Dengan adanya e-commerce ini dapat memudahkan transaksi jual beli antara pemilik toko dan pembeli, serta memudahkan pemilik toko dalam memperbaharui informasi sehingga dengan adanya e- commerce omset penjualan akanmeningkat. Kata Kunci:E-commerce, website, Sidewalk Clothing

  6. THE EFFECTS OF INTERNATIONAL ECONOMIC CRISIS ONTURKISH READY-MADE CLOTHING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Nurgul KILINC

    2012-07-01

    Full Text Available THE EFFECTS OF INTERTextile and ready-made clothing sector is one of the sectors that globalize in anadvanced level due to employment it provides, value-added created by it duringthe manufacturing process and high share in export revenue.In this research, 5 international economiccrisesdetermined since the foundationof theTurkish Republic, Turkish textile and ready-made clothing sector have beenexamined depending on journal archives and export-import data.Economic crises emerged in the world between 1974 and 2008 from whichTurkey has been affected as well have been examined by document analysismethod, which is a qualitative data gathering method in this research.By this research, which has studied international economic crisesoccurredinfragile and vulnerable Turkish economy since 1974 as regards to reason, result,effects and which has aimed to detect their effects on textile and ready-madeclothing sector. It has been realised that textile and ready-made clothing sectorthat is the locomotive sector of export of Turkey is the premier sector of thesectors those are being affected initially and directly from the negativedevelopments inTurkish economy. NATIONAL ECONOMIC CRISIS ONTURKISH READY-MADE CLOTHING INDUSTRY

  7. The Agreement on Textiles and Clothing: Potential Effects on Gender Equality in Pakistan

    NARCIS (Netherlands)

    K.A. Siegmann (Karin Astrid)

    2004-01-01

    textabstractAbstract The government has realized that the textile and clothing sector is one sector that offers good prospects for diversification away from traditional commodity exports, for entry into the area of manufacturers, for absorption of large pools of manpower, for crossing the big

  8. Test determination of aluminum, beryllium, and cationic surfactants using phenolcarboxylic acids of the triphenylmethane series immobilized on cloths from synthetic and natural fibers

    International Nuclear Information System (INIS)

    Amelin, V.G.; Gan'kova, O.B.

    2007-01-01

    The use of cloth matrices from viscose and cotton fibers bearing phenolcarboxylic acids of the triphenylmethane series immobilized by adsorption in chemical test methods of analysis is considered. Chrome Azurol S, Sulfochrome, and Eriochrome Cyanine R were used for immobilization. It was found that the reagents are weakly retained on cellulose matrices. The degree of retention varied from 10 to 60%. It was observed that the reagent complexes of metal ions exhibited enhanced adsorbability on the matrices. Cloths with immobilized Chrome Azurol S were used in the test determination of 0.0005-0.5 mg/l beryllium and 0.0005-1.0 mg/l aluminum. When the reaction products were preconcentrated on the cloth from 100 ml of a test solution, the detection limit was 0.0001 mg/l. Procedures were developed for determining 0.1-100 mg/l aluminum and 0.02-0.6 mg/l beryllium in solutions using cloth test strips encapsulated into a polymeric film. It was demonstrated that Sulfochrome and Eriochrome Cyanine R immobilized on cloths can be used to determine 0.01-1 and 1-1000 mg/l cationic surfactants [ru

  9. Impact of Different Personal Protective Clothing on Wildland Firefighters' Physiological Strain

    OpenAIRE

    Carballo-Leyenda, Belén; Villa, José G.; López-Satué, Jorge; Rodríguez-Marroyo, Jose A.

    2017-01-01

    Wildfire firefighting is an extremely demanding occupation performed under hot environment. The use of personal protective clothing (PPC) is needed to protect subjects from the thermal exposure. However, the additional use of PPC may increase the wildland firefighters' physiological strain, and consequently limit their performance. The aim of this study was to analyze the effect of four different PPC on the physiological strain of wildland firefighters under moderate conditions (30?C and 30% ...

  10. Flexible pressure sensors for smart protective clothing against impact loading

    International Nuclear Information System (INIS)

    Wang, Fei; Zhu, Bo; Shu, Lin; Tao, Xiaoming

    2014-01-01

    The development of smart protective clothing will facilitate the quick detection of injuries from contact sports, traffic collisions and other accidents. To obtain real-time information like spatial and temporal pressure distributions on the clothing, flexible pressure sensor arrays are required. Based on a resistive fabric strain sensor we demonstrate all flexible, resistive pressure sensors with a large workable pressure range (0–8 MPa), a high sensitivity (1 MPa −1 ) and an excellent repeatability (lowest non-repeatability ±2.4% from 0.8 to 8 MPa) that can be inexpensively fabricated using fabric strain sensors and biocompatible polydimethylsiloxane (PDMS). The pressure sensitivity is tunable by using elastomers with different elasticities or by the pre-strain control of fabric strain sensors. Finite element simulation further confirms the sensor design. The simple structure, large workable pressure range, high sensitivity, high flexibility, facile fabrication and low cost of these pressure sensors make them promising candidates for smart protective clothing against impact loading. (paper)

  11. Influence of a carbohydrate drink on performance of military personnel in NBC protective clothing

    NARCIS (Netherlands)

    Dokkum, W. van; Boxtel, L.B.J. van; Dijk, M.J. van; Boer, L.C.; Beek, E.J. van der

    1996-01-01

    Background: The increased threat of nuclear, biological and chemical (NBC) weapons underlines the need of protective clothing and gas masks, but this may impair performance. Thus, attention should be focused on the nutritional requirements. Hypothesis: Optimal performance is guaranteed if the supply

  12. How role distribution influences choice of spatial reference frames in a virtual collaborative task

    OpenAIRE

    Pouliquen-Lardy , Lauriane; Milleville-Pennel , Isabelle; Guillaume , François; Mars , Franck

    2014-01-01

    International audience; We investigated the effects of role distribution on individuals' choice of reference frames in a two-person task. Pairs of participants had to move a virtual block in a constraint immersive virtual environment: only one of them could manipulate the ob-ject, his coworker guided him in the VE. Results show that the guiding operators used more addressee-centered frames of ref-erence than the manipulators. They also suggest that the guides tried to facilitate the manipulat...

  13. Modernising patient clothing: a Florence Nightingale Foundation project.

    Science.gov (United States)

    Fitzgerald, Christine

    2017-04-27

    Christine Fitzgerald, Matron at The Hillingdon Hospitals NHS Foundation Trust (currently on secondment) discusses a project to boost patient self-esteem and dignity through the clothing provided for them to wear.

  14. Cold or hot wash: Technological choices, cultural change, and their impact on clothes-washing energy use in China

    International Nuclear Information System (INIS)

    Lin, Jiang; Iyer, Maithili

    2007-01-01

    Usage pattern of clothes washing (and clothes washers) are strongly related to local cultural practices. Such practices have led to the development of distinctive clothes-washing technologies in the US, Europe, and Japan. In emerging markets such as China, several types of technologies often co-exist. Some use less energy but more water (the impeller type), and some use more energy but less water (the horizontal axis type). The competition between different technologies is thought to lead to better consumer choices. However, it could also lead to changes in clothes-washing habits-from cold to hot wash, and therefore to much higher energy use. This paper examines the standard development process in China to illustrate that adoption of foreign technologies and technical standards, if not carefully calibrated to the local cultural practices, could have unintended consequences for energy use and environment

  15. Stories in the Cloth: Art Therapy and Narrative Textiles

    Science.gov (United States)

    Garlock, Lisa Raye

    2016-01-01

    In this article I weave together the relevance of narrative textile work in therapeutic and human rights contexts; showcase Common Threads, an international nonprofit that uses story cloths with survivors of gender-based violence; outline a master's level art therapy course in story cloths; and relate how textiles helped build a sibling…

  16. THE BRAZIL-BOLIVIA BORDER AND THE SECOND-HAND CLOTHING DISTRIBUTION NETWORK

    Directory of Open Access Journals (Sweden)

    Tito Carlos Machado Oliveira

    2015-12-01

    Full Text Available The second-hand clothing trade started widely in Bolivia in 1994. This kind of trade usually involves popular globalization activities, whose practices are often identified by State agencies as illegal, although with natural popular acceptance. It is established within a complex system of networks, and takes advantage of distribution (stock and transfer meshes and knots, with the consequent conformation of connected territorial circuits. This paper aims at analyzing the second-hand clothing trade in three locations: Santa Cruz de la Sierra and Puerto Quijarro (Bolivia, and Corumbá (Brazil. The purpose is to identify the route and the nuances regarding the second-hand clothing distribution network from Santa Cruz de la Sierra to Corumbá, on the Bolivia-Brazil border.

  17. TO SEW OR NOT TO SEW. SEAMLESS CLOTHES AND SEAMLESS APPEARANCE IN FASHION DESIGN

    Directory of Open Access Journals (Sweden)

    ANDOR Elena Corina

    2015-05-01

    Full Text Available At first glance clothes are obviously made by cutting and sewing. The textile fabric is cut in different shapes and reassembled by sewing in the wanted shape and volume. Sometimes the structures can be quite complex. The truth is that there are more ways of making clothes, as we can see looking back into the history of fashion. The progress of technology in textile industry offers also very interesting directions that we could not dream about some time ago. Observing carefully the economy of seams, their presence, absence or the suitable number can move us towards creative solutions that are relevant not only for the esthetic of a garment but also for the process of making clothes suggesting alternatives for the present situation and its important problems like sustainability. This paper is a survey of alternative ways in making clothes and highlights the relation between concept and practical issues. The starting point is seamless clothing and the natural fascination of the subject. Going further on this line we should consider that the absence of the seams in a garment is not the same with a seamless appearance. So, do we really need to sew our clothes?

  18. Development and environmental applications of activated carbon cloths

    OpenAIRE

    Cukierman, Ana Lea

    2017-01-01

    Activated carbon cloths have received growing attention because they offer comparative advantages over the traditional powdered or granular forms of this well-known adsorbent, providing further potential uses for technological innovations in several fields. The present article provides an overview of research studies and advances concerned with the development of activated carbon cloths and their use as adsorbent in environmental applications, mostly reported in the last years. The influence ...

  19. Everyday clothing of the Goranci females in Belgrade - between traditional and modern cultural practices

    Directory of Open Access Journals (Sweden)

    Đorđević-Crnobrnja Jadranka

    2015-01-01

    Full Text Available The paper presents and discusses changes in certain dress and clothing practices and their effects on conflict within oneself and others. In this context, the paper analyzes certain conflict situations faced by the Goranci females in Belgrade. This conflict was brought about by the changes that have occurred in the females clothing during the second half of 20th and the first decade of 21st century. The focus is placed on changes that were initiated by external factors - legislation, migration and fashion trends. Accepting novelties in dress and clothing was not always simple and easy, especially if they implied the elimination of those garments implying a certain symbolic significance within the Goranci community and female subculture. Besides, changes in clothing imply and initiate changes in other spheres of life, especially in the sphere of (self identification, on several levels at the same time (gender, religious, ethnic, etc.. The initiation of the clothing changes impacted the women in such a way to become somewhat at odds with themselves, to feel discomfort because of the fear that the (non acceptance of the novelty could cause conflicts with some family members and relatives. A reconciliation with oneself and others imply that a women accepts a new way of dressing, but also the rest of whatever this may imply. Such reconciliation - assessed in this way - is not an end in itself. It is a process that involves several aspects simultaneously, and clothing is just one among them. In addition, a reconciliation on a personal level does not imply in itself reconciliation with others, and vice versa. Conflicts due to clothing do not represent an exception in this respect, but proved to be indicative for understanding complex socio-cultural processes such as reconciliation.

  20. Virtual malls for web commerce: Observations and case study

    NARCIS (Netherlands)

    Nijholt, Antinus; Linnhoff-Popien, C.; Hegering, H.G.

    2000-01-01

    In the real world there seem to be essential differences between shops, tourist offices, city halls, theatres and museums. However, when we try to design virtual environments allowing services, transactions, explorations and communication, are these environments really that different? Doesn't the

  1. Heat stress in chemical protective clothing: Porosity and vapour resistance

    NARCIS (Netherlands)

    Havenith, G.; Hartog, E.A. den; Martini, S.

    2011-01-01

    Heat strain in chemical protective clothing is an important factor in industrial and military practice. Various improvements to the clothing to alleviate strain while maintaining protection have been attempted. More recently, selectively permeable membranes have been introduced to improve

  2. The Art of African Senufo Cloth

    Science.gov (United States)

    Dalton, Jane

    2009-01-01

    The Senufo people create paintings on hand-woven fabric using natural fibers, natural dyes made from leaves, and mud dug from the roots of trees. The fabric of the Senufo is woven in strips approximately six-to-eight inches wide, and sewn together to make a larger fabric for painting. The stylized drawings painted on the cloth are of masked…

  3. COMPARATIVE ADVANTAGE OF CLOTHING SECTOR IN THE EU-28 MARKET

    OpenAIRE

    TRIPA Simona

    2017-01-01

    The study presented here is aimed at analyzing the comparative advantages in the European clothing sector with the focus on Balkan states. The dynamics of change over a 15‐year period following economic reforms are revealed. For all Balkan countries export plays an important role in promoting economic growth and development and the clothing industries play a significant role and continue to contribute to the economic prosperity in this countries. The evolution of the RCA index for garment ind...

  4. Personal Protection of Permethrin-Treated Clothing against Aedes aegypti, the Vector of Dengue and Zika Virus, in the Laboratory.

    Science.gov (United States)

    Orsborne, James; DeRaedt Banks, Sarah; Hendy, Adam; Gezan, Salvador A; Kaur, Harparkash; Wilder-Smith, Annelies; Lindsay, Steve W; Logan, James G

    2016-01-01

    The dengue and Zika viruses are primarily transmitted by Aedes aegypti mosquitoes, which are most active during day light hours and feed both in and outside of the household. Personal protection technologies such as insecticide-treated clothing could provide individual protection. Here we assessed the efficacy of permethrin-treated clothing on personal protection in the laboratory. The effect of washing on treated clothing, skin coverage and protection against resistant and susceptible Ae. aegypti was assessed using modified WHO arm-in-cage assays. Coverage was further assessed using free-flight room tests to investigate the protective efficacy of unwashed factory-dipped permethrin-treated clothing. Clothing was worn as full coverage (long sleeves and trousers) and partial coverage (short sleeves and shorts). Residual permethrin on the skin and its effect on mosquitoes was measured using modified WHO cone assays and quantified using high-pressure liquid chromatography (HPLC) analysis. In the arm-in-cage assays, unwashed clothing reduced landing by 58.9% (95% CI 49.2-66.9) and biting by 28.5% (95% CI 22.5-34.0), but reduced to 18.5% (95% CI 14.7-22.3) and 11.1% (95% CI 8.5-13.8) respectively after 10 washes. Landing and biting for resistant and susceptible strains was not significantly different (ptreated clothing reduced landing by 24.3% (95% CI 17.4-31.7) and biting by 91% (95% CI 82.2-95.9) with partial coverage reducing landing and biting by 26.4% (95% CI 20.3-31.2) and 49.3% (95% CI 42.1-59.1) respectively with coverage type having no significant difference on landing (p80% one hour after wearing treated clothing. Whilst partially covering the body with permethrin-treated clothing provided some protection against biting, wearing treated clothing with long sleeves and trousers provided the highest form of protection. Washing treated clothing dramatically reduced protection provided. Permethrin-treated clothing could provide protection to individuals from Ae

  5. Technical Design of Flexible Thin-Film Solar Heating Clothes with Switchable Output Power

    Directory of Open Access Journals (Sweden)

    Zhao Yu Xiao

    2016-01-01

    Full Text Available This research focuses on the research and development of thermal clothes through technical design, by adopting unique removable electronic equipment and applying carbon fiber material to thermal clothes against cold, so as to meet the requirements of active heating and passive warmth retention. Firstly, the specification of power supply system was determined in accordance with the requirements of power system, and the specification of charging system was determined according to the specification of power system. Then circuit system was designed and tested. Fianlly, the electronic device was configured on the clothes appropriately, so that it should be conforms to ergonomic principles, convenient and fast.

  6. Pengaruh Ideologi Visual dalam Penciptaan Positioning Clothing (Studi Kasus: Unkl/347-Bandung

    Directory of Open Access Journals (Sweden)

    Monica Hartanti

    2012-01-01

    Full Text Available The Uniqueness and characteristics of Clothing, two of the fashion categories have created the under¬standing of fashion as an ideology, which ensures the functioning of dominant and dominance systems in a social order. Through the analysis of qualitative descriptive research will be known the visual ideology of a clothing product formed by producers in the eyes of consumers. In the end it is capable of forming the product positioning concerned. The results of of this research reveals the emergence of Ideology in clothing, based on the ideals of the creator of the clothing products. The formation of these ideals cannot be separated from the role of the community as a medium that supports the absorption of the ideology as the characteristic of a particular group. It reveals that visual ideology is one of the important factors that establishes the positioning of a product, which is created because of the existence of product differentiation that supports it.

  7. Evaluation of the integrity of radiological protection clothing used in veterinary radiology

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, Paola da Costa; Barros, Frieda Saicla; Costa, Douglas Siqueira da, E-mail: paah_dacosta@hotmail.com [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil). Curso Superior de Tecnologia em Radiologia e Programa de Pos-Graduacao em Engenharia Biomedica

    2017-11-01

    This study aimed to evaluate the integrity of radiological protection clothing used by veterinarians in veterinary radiology facilities, and whether they are available in an adequate quantity for the team. Inspection was performed by palpation, followed by X-ray scanning in 189 clothing from 29 veterinary facilities. The results indicate that 5% of the clothes evaluated in this study were considered inadequate due to the failure of the integrity of the lead, being most lead aprons. All facilities have at least two lead aprons and one Thyroid protectors. 24% of the facilities have lead glasses, pointing to a risk to veterinarians by radiosensitivity of the eyes. Also, 24% of the facilities do not have lead gloves, which also presents a risk due to the hand's exposure to the primary beam. Most lead clothing has shield equivalence of 0.5mmPb. The method used in the study was effective in attesting the adequacy of lead clothing. It is recommended to periodically evaluate clothing to ensure that users are always protected. (author)

  8. Evaluation of the integrity of radiological protection clothing used in veterinary radiology

    International Nuclear Information System (INIS)

    Rosa, Paola da Costa; Barros, Frieda Saicla; Costa, Douglas Siqueira da

    2017-01-01

    This study aimed to evaluate the integrity of radiological protection clothing used by veterinarians in veterinary radiology facilities, and whether they are available in an adequate quantity for the team. Inspection was performed by palpation, followed by X-ray scanning in 189 clothing from 29 veterinary facilities. The results indicate that 5% of the clothes evaluated in this study were considered inadequate due to the failure of the integrity of the lead, being most lead aprons. All facilities have at least two lead aprons and one Thyroid protectors. 24% of the facilities have lead glasses, pointing to a risk to veterinarians by radiosensitivity of the eyes. Also, 24% of the facilities do not have lead gloves, which also presents a risk due to the hand's exposure to the primary beam. Most lead clothing has shield equivalence of 0.5mmPb. The method used in the study was effective in attesting the adequacy of lead clothing. It is recommended to periodically evaluate clothing to ensure that users are always protected. (author)

  9. A comparison of suit dresses and summer clothes in the terms of thermal comfort.

    Science.gov (United States)

    Ekici, Can; Atilgan, Ibrahim

    2013-12-19

    Fanger's PMV equation is the result of the combined quantitative effects of the air temperature, mean radiant temperature, relative air velocity, humidity, activity level and clothing insulation. This paper contains a comparison of suit dresses and summer clothes in terms of thermal comfort, Fanger's PMV equation. Studies were processed in the winter for an office, which locates in Ankara, Turkey. The office was partitioned to fifty square cells. Humidity, relative air velocity, air temperature and mean radiant temperature were measured on the centre points of these cells. Thermal comfort analyses were processed for suit dressing (Icl = 1 clo) and summer clothing (Icl = 0.5 clo). Discomfort/comfort in an environment for different clothing types can be seen in this study. The relationship between indoor thermal comfort distribution and clothing type was discussed. Graphics about thermal comfort were sketched according to cells. Conclusions about the thermal comfort of occupants were given by PMV graphics.

  10. THE RELATIONSHIP BETWEEN WORDS, TEXTS, CLOTHES AND TEXTILES

    Directory of Open Access Journals (Sweden)

    STURZA Amalia

    2017-05-01

    Full Text Available In this paper we will speculate the possible relationships between “word,” “text,” “textile,” and “clothing”. Many of the terms we use to describe our interactions with words are derived from the common linguistic root and numerous other expressions associated with reading and writing are drawn from the rich vocabulary of cloth. Textiles are one of the most ubiquitous components of material culture and they are also integral to the material history of texts. The intersection between texts and textiles locates the relationship between language and dress, as together they structure the fashion scene over the century. We compare these texts and storytelling with the process of making clothes, they go from fibers that are spun and then create the fabric or the material out of which the clothes are made. Besides the similitude of the words “text” and “textile” that have four similar letters there is also the resemblance in the way they transmit a message. While texts are meant to transmit something to the reader, to enchant and to create emotions in so various ways, just in the same way clothes are also meant to transmit emotions and feelings to the wearer or to the people watching them.

  11. Research on virtual Guzheng based on Kinect

    Science.gov (United States)

    Li, Shuyao; Xu, Kuangyi; Zhang, Heng

    2018-05-01

    There are a lot of researches on virtual instruments, but there are few on classical Chinese instruments, and the techniques used are very limited. This paper uses Unity 3D and Kinect camera combined with virtual reality technology and gesture recognition method to design a virtual playing system of Guzheng, a traditional Chinese musical instrument, with demonstration function. In this paper, the real scene obtained by Kinect camera is fused with virtual Guzheng in Unity 3D. The depth data obtained by Kinect and the Suzuki85 algorithm are used to recognize the relative position of the user's right hand and the virtual Guzheng, and the hand gesture of the user is recognized by Kinect.

  12. Dynamics of Clothing I. Curriculum Guide. A Family and Consumer Sciences Education Course of Study for Grades 9-12.

    Science.gov (United States)

    Hunger, Dean-Ellen, Ed.; Hancey, Helen-Louise; Hendrickson, Diane; Hicks, Camille; Munns, Barbara; Price, Barbara

    This document is a six-unit curriculum guide for a high school (grades 9-12) course in clothing instruction. The units contain one to three lessons on the following topics: (1) psychology of clothing and appearance (role of clothing and clothing choices, personal grooming); (2) design principles (line and design, color); (3) construction…

  13. PyTRiP - a toolbox and GUI for the proton/ion therapy planning system TRiP

    International Nuclear Information System (INIS)

    Toftegaard, J; Bassler, N; Petersen, J B

    2014-01-01

    Purpose: Only very few treatment planning systems (TPS) are capable of handling heavy ions. Commercial heavy ion TPS are costly and normally restrict the possibility to implement new functionalities. PyTRiP provides Python bindings and a platform-independent graphical user interface (GUI) for the heavy ion treatment program TRiP, and adds seamless support of DICOM files. We aim to provide a front-end for TRiP which does not require any special computer skills. Methods: PyTRiP is written in Python combined with C for fast computing. Routines for DICOM file import/export to TRiPs native file format are implemented. The GUI comes as an executable with all its dependencies including PyTRiP making it easy to install on Windows, Mac and Linux. Results: PyTRiP is a comprehensive toolbox for handling TRiP. Treatment plans are handled using an object oriented structure. Bindings to TRiP (which only runs on Linux, either locally or on a remote server) are performed through a single function call. GUI users can intuitively create treatment plans without much knowledge about the TRiP user interface. Advanced users still have full access to all TRiP functionality. The user interface comes with a comprehensive plotting tool, which can visualize 2D contours, volume histograms, as well as dose- and linear energy transfer (LET) distributions. Conclusion: We developed a powerful toolbox for ion therapy research using TRiP as backend. The corresponding GUI allows to easily and intuitively create, calculate and visualize treatment plans. TRiP is thereby more accessible and simpler to use.

  14. Fracture detection in concrete by glass fiber cloth reinforced plastics

    Science.gov (United States)

    Shin, Soon-Gi; Lee, Sung-Riong

    2006-04-01

    Two types of carbon (carbon fiber and carbon powder) and a glass cloth were used as conductive phases and a reinforcing fiber, respectively, in polymer rods. The carbon powder was used for fabricating electrically conductive carbon powder-glass fiber reinforced plastic (CP-GFRP) rods. The carbon fiber tows and the CP-GFRP rods were adhered to mortar specimens using epoxy resin and glass fiber cloth. On bending, the electrical resistance of the carbon fiber tow attached to the mortar specimen increased greatly after crack generation, and that of the CP-GFRP rod increased after the early stages of deflection in the mortar. Therefore, the CP-GFRP rod is superior to the carbon fiber tow in detecting fractures. Also, by reinforcing with a glass fiber cloth reinforced plastic, the strength of the mortar specimens became more than twice as strong as that of the unreinforced mortar.

  15. A methodological approach to the materiality of clothing: Wardrobe studies

    OpenAIRE

    Klepp, Ingun Grimstad; Mari, Bjerck

    2012-01-01

    The material is not just ‘a carrier’ of different types of symbols, but an active element in the practices. Bringing this to the fore requires new research methods. This article discusses a methodological approach, we call it a wardrobe study, which allows for the analysis of the way in which clothes relate to each other on the whole or within parts of the wardrobe. More specifically, we discuss how this method can contribute to increasing the materiality of clothes studies. The theoretical p...

  16. Self-Powered, Flexible, and Solution-Processable Perovskite Photodetector Based on Low-Cost Carbon Cloth.

    Science.gov (United States)

    Sun, Haoxuan; Lei, Tianyu; Tian, Wei; Cao, Fengren; Xiong, Jie; Li, Liang

    2017-07-01

    Flexible perovskite photodetectors are usually constructed on indium-tin-oxide-coated polymer substrates, which are expensive, fragile, and not resistant to high temperature. Herein, for the first time, a high-performance flexible perovskite photodetector is fabricated based on low-cost carbon cloth via a facile solution processable strategy. In this device, perovskite microcrystal and Spiro-OMeTAD (hole transporting material) blended film act as active materials for light detection, and carbon cloth serves as both a flexible substrate and a conductive electrode. The as-fabricated photodetector shows a broad spectrum response from ultraviolet to near-infrared light, high responsivity, fast response speed, long-term stability, and self-powered capability. Flexible devices show negligible degradation after several tens of bending cycles and at the extremely bending angle of 180°. This work promises a new technique to construct flexible, high-performance photodetectors with low cost and self-powered capability. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Clothes make the man

    NARCIS (Netherlands)

    Kregting, A.

    2014-01-01

    When it is winter you will wear a warm jumper, a heavy coat and gloves, during summertime a pair of shorts and a shirt are enough. You adapt your clothes to the climate conditions you live in. However, if you are working under extreme weather circumstances it is a different story, because how do you

  18. Respirators and protective clothing

    International Nuclear Information System (INIS)

    1967-01-01

    The basic object in the use of protective clothing and equipment is to prevent contamination of the skin and to prevent inhalation and ingestion of radioactive isotopes or other toxic materials. This book is a guide to deciding the kind and quantity of protective equipment needed for a particular type of laboratory or operation.

  19. Dermal uptake of nicotine from air and clothing: Experimental verification

    DEFF Research Database (Denmark)

    Bekö, Gabriel; Morrison, Glenn; Weschler, Charles J.

    2017-01-01

    Studies suggest that dermal uptake of certain semivolatile organic compounds (SVOC) directly from air can be a significant exposure pathway. This has been experimentally confirmed for two phthalates (Weschler et al., 2015). Morrison et al. (2016) showed that clean clothing can impede, while cloth...

  20. Research on application of carbon fiber heating material in clothing

    Science.gov (United States)

    Yang, Huanhong

    2017-08-01

    With the development of society, the way of keeping warm clothing is also developing. Carbon fiber has the advantages of high efficiency, safety, mobility and comfort. As a heating element, it has good application prospect. In this paper, the main technology, application issues and design method of carbon fiber heating garment are analyzed, and the key problems in industrialization are also put forward.

  1. Can painted glass felt or glass fibre cloth be used as vapour barrier?

    DEFF Research Database (Denmark)

    El-Khattam, Amira; Andersen, Mie Them; Hansen, Kurt Kielsgaard

    2014-01-01

    In most Nordic homes the interior surfaces of walls and ceilings have some kind of surface treatment for aesthetical reasons. The treatments can for example be glass felt or glass fibre cloth which are painted afterwards. To evaluate the hygrothermal performance of walls and ceilings...... treatments. The surface treatments were glass felt or glass fibre cloth with different types of paints or just paint. The paint types were acrylic paint and silicate paint. The results show that the paint type has high influence on the water vapour resistance while the underlay i.e. glass felt or glass fibre...... acrylic paint on glass felt or glass fibre cloth cannot be used instead of a vapour barrier....

  2. Two Innovative Steps for Training on Maintenance: 'VIRMAN' Spanish Project based on Virtual Reality 'STARMATE' European Project based on Augmented Reality

    International Nuclear Information System (INIS)

    Gonzalez Anez, Francisco

    2002-01-01

    This paper presents two development projects (STARMATE and VIRMAN) focused on supporting training on maintenance. Both projects aim at specifying, designing, developing, and demonstrating prototypes allowing computer guided maintenance of complex mechanical elements using Augmented and Virtual Reality techniques. VIRMAN is a Spanish development project. The objective is to create a computer tool for maintenance training course elaborations and training delivery based on 3D virtual reality models of complex components. The training delivery includes 3D record displays on maintenance procedures with all complementary information for intervention understanding. Users are requested to perform the maintenance intervention trying to follow up the procedure. Users can be evaluated about the level of knowledge achieved. Instructors can check the evaluation records left during the training sessions. VIRMAN is simple software supported by a regular computer and can be used in an Internet framework. STARMATE is a forward step in the area of virtual reality. STARMATE is a European Commission project in the frame of 'Information Societies Technologies'. A consortium of five companies and one research institute shares their expertise in this new technology. STARMATE provides two main functionalities (1) user assistance for achieving assembly/de-assembly and following maintenance procedures, and (2) workforce training. The project relies on Augmented Reality techniques, which is a growing area in Virtual Reality research. The idea of Augmented Reality is to combine a real scene, viewed by the user, with a virtual scene, generated by a computer, augmenting the reality with additional information. The user interface is see-through goggles, headphones, microphone and an optical tracking system. All these devices are integrated in a helmet connected with two regular computers. The user has his hands free for performing the maintenance intervention and he can navigate in the virtual

  3. Textiles and clothing sustainability sustainable textile chemical processes

    CERN Document Server

    2017-01-01

    This book highlights the challenges in sustainable wet processing of textiles, natural dyes, enzymatic textiles and sustainable textile finishes. Textile industry is known for its chemical processing issues and many NGO’s are behind the textile sector to streamline its chemical processing, which is the black face of clothing and fashion sector. Sustainable textile chemical processes are crucial for attaining sustainability in the clothing sector. Seven comprehensive chapters are aimed to highlight these issues in the book.

  4. Textiles and clothing sustainability implications in textiles and fashion

    CERN Document Server

    2017-01-01

    This book comprehensively covers the topic of sustainability in the clothing and fashion sector. Sustainability is applied under different industrial sectors and there has to be a distinction in every industrial sector when it comes to sustainability in its application. Though the definition is common for sustainability, sustainability in the clothing sector has its unique objectives, principles, and limitations, which this book highlights.

  5. The Logistics Of Information In Customer Service Of Online Clothing Shops

    Directory of Open Access Journals (Sweden)

    Dariusz Weiland

    2018-01-01

    Full Text Available The primary objective of this article is to present information logistics as a crucial component of servicing the customers of online clothing stores. The article assesses the relationship between store-transferred information transferred and the rating given by customers. Furthermore, the article explicates the necessity to treat information as a resource, outlines the logistics of information and its influence on the functioning of e-commerce, focusing on the most prominent characteristics of e-trade in Poland, especially in the clothing sector.

  6. Post-Secondary Analysis of Clothing/Textiles Technology Programs in Texas.

    Science.gov (United States)

    Glosson, Linda R.; And Others

    A study examined postsecondary occupational programs in clothing and textiles technology in Texas in order to (1) identify common essential competencies taught in postsecondary clothing/textiles technology programs, (2) develop and distribute student competency profiles of essential common competencies shared by the eight areas of study within…

  7. Human physiology as the determining factor in protective clothing design

    NARCIS (Netherlands)

    Daanen, Hein

    2014-01-01

    Protective clothing is designed to protect humans against risks like fire, chemicals or blunt impact. Although protect¡ve clothing diminishes the effects of external risks, it may hinder people in functioning and it may also introduce new (internal) risks. Manufacturers are often not aware of the

  8. Recovery of Trace DNA on Clothing: A Comparison of Mini-tape Lifting and Three Other Forensic Evidence Collection Techniques.

    Science.gov (United States)

    Hess, Sabine; Haas, Cordula

    2017-01-01

    Trace DNA is often found in forensic science investigations. Experience has shown that it is difficult to retrieve a DNA profile when trace DNA is collected from clothing. The aim of this study was to compare four different DNA collection techniques on six different types of clothing in order to determine the best trace DNA recovery method. The classical stain recovery technique using a wet cotton swab was tested against dry swabbing, scraping and a new method, referred to as the mini-tape lifting technique. Physical contact was simulated with three different "perpetrators" on 18 machine-washed garments. DNA was collected with the four different DNA recovery methods and subjected to standard PCR-based DNA profiling. The comparison of STR results showed best results for the mini-tape lifting and scraping methods independent of the type of clothing. The new mini-tape lifting technique proved to be an easy and reliable DNA collection method for textiles. © 2016 American Academy of Forensic Sciences.

  9. A novel test method for measuring the thermal properties of clothing ensembles under dynamic conditions

    International Nuclear Information System (INIS)

    Wan, X; Fan, J

    2008-01-01

    The dynamic thermal properties of clothing ensembles are important to thermal transient comfort, but have so far not been properly quantified. In this paper, a novel test procedure and new index based on measurements on the sweating fabric manikin-Walter are proposed to quantify and measure the dynamic thermal properties of clothing ensembles. Experiments showed that the new index is correlated to the changing rate of the body temperature of the wearer, which is an important indicator of thermal transient comfort. Clothing ensembles having higher values of the index means the wearer will have a faster changing rate of body temperature and shorter duration before approaching a dangerous thermo-physiological state, when he changes from 'resting' to 'exercising' mode. Clothing should therefore be designed to reduce the value of the index

  10. The CSR Challenges in the Clothing Industry

    Directory of Open Access Journals (Sweden)

    Paulina Księżak

    2016-10-01

    Full Text Available The aim of this paper is to study the clothing and textile industry through the prism of the CSR. First of all, it investigates the ways in which companies of this sector deal with the social responsibility issues that are specifically important to the characteristics of the fashion industry. Secondly, the motivators of implementing CSR in the textile and clothing business are identified and analysed. Thirdly, the CSR practices of H&M Hennes & Mauritz AB, a wellknown multinational corporation operating in the sector of fashion, are discussed in order to illustrate the theoretical review with the case study approach.

  11. European Union Import Quotas on Chinese Textile and Clothing Exports in 2005

    DEFF Research Database (Denmark)

    Nedergaard, Peter

    2009-01-01

    ? The rational choice inspired model put forward in this paper assumes that the EU's political system is a partial asymmetrical political equilibrium in which decisions taken by decision makers are a product of a supply and demand. By using this model, it is explained how the lifting of quotas on Chinese textile...... and clothing exports to WTO members on 1 January, 2005 and the political situation surrounding the French referendum on the Constitutional Treaty on 29 May, 2005, constitute key events in the decision making process....

  12. In-depth assessment of the situation of the textile and clothing sector in the EU and prospects : Task 2: assessment of the way specialised research and innovation liaise with textile/clothing enterprises

    NARCIS (Netherlands)

    Scheffer, M.R. (Michiel)

    2011-01-01

    The in-depth assessment of the situation of the European textile and clothing sector is composed by six independent reports with a close focus on key aspects useful to understand the dynamics and the development of the textile and clothing industry, drivers of change – most notably the impact

  13. In-depth assessment of the situation of the textile and clothing sector in the EU and prospects : Task 4: assessment of past or ongoing restructuring and modernisation processes in textile/clothing enterprises

    NARCIS (Netherlands)

    S, M.R. (Michiel)

    2012-01-01

    The in-depth assessment of the situation of the European textile and clothing sector is composed by six independent reports with a close focus on key aspects useful to understand the dynamics and the development of the textile and clothing industry, drivers of change – most notably the impact

  14. In-depth assessment of the situation of the textile and clothing sector in the EU and prospects : Task 5: assess what type of training has been provided to textile and clothing workers

    NARCIS (Netherlands)

    Scheffer, M.R. (Michiel)

    2012-01-01

    The in-depth assessment of the situation of the European textile and clothing sector is composed by six independent reports with a close focus on key aspects useful to understand the dynamics and the development of the textile and clothing industry, drivers of change – most notably the impact

  15. An empirical survey to investigate quality of men's clothing market using QFD method

    Directory of Open Access Journals (Sweden)

    Samira Golshan

    2012-08-01

    Full Text Available One of the most important techniques on improving customer satisfaction in clothing and textile industry is to increase the quality of goods and services. There are literally different methods for detecting important items influencing clothing products and the proposed model of this paper uses quality function deployment (QFD. The proposed model of this paper designs and distributes a questionnaire among some experts to detect necessary factors and using house of quality we determine the most important factors impacting the customer's clothing selection. The proposed study of this paper focuses men who are 15 to 45 years old living in Yazd/Iran. The brand we do the investigation sells the products in three shopping centers located in this city. We have distributed 100 questionnaires and collected 65 properly filled ones. Based on the results of our survey, suitable design, printing and packaging specifications, necessary requirements, optimization of production planning and appropriate sewing machine setting are considered as the most important characteristics influencing the purchase of a clothing products.

  16. DECS tries out instructional materials on AIDS prevention education.

    Science.gov (United States)

    1994-01-01

    A national try-out of the newly developed print and non-print instructional materials on AIDS Education is being conducted by the Department of Education, Culture and Sports (DECS) this school year 1993-to 1994. To determine the effectiveness of these materials, various public and private schools in Region IV (Southern Tagalog), VII (Central Visayas) XI (Southern Mindanao) and National Capital Region (Metro, Manila) were chosen as try-out institutions. The AIDS education materials will be tried out in different subjects in some grade and year levels such as civics and culture (grade one); science and health (grades three and six); home economics and livelihood education (grade five); physical education, health and music (second year) and Pilipino Language (third year). The materials for the elementary level consist of posters, cut-out pictures, voice tapes, jingles, talking books and slides, while the secondary school level utilizes modules. For the tertiary level, a Resource Book on AIDS Prevention Education is used by the Teacher Training Institutions and the Non-Formal Education employs the Facilitator's Guide for Levels I-III. These materials will be tried out in both urban and rural schools, with control school and experimental school at each level. full text

  17. THE E.U. TEXTILE AND CLOTHING TRADE AND ITS IMPACT ON SILK WORM REARING DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Agatha POPESCU

    2013-01-01

    Full Text Available The paper aimed to analyze the major trade flows in the E.U. textile and clothing industry in close connection with the future development of sericiculture using the data provided by EU Market Access Data Base for the period 2007-2011.The world market of textile and clothing is divided into two parts: raw material providers mainly situated in Asia, but also in South America and large processors situated in the E.U. such as Italy, France, United Kingdom and Spain, whose contribution to the EU production is 75 %. The main E.U. supplier of raw material for textile and clothing industry is China, followed by India, Bangladesh, Turkey and Brazil. About 33 % of the E.U.production of textile and garments is successfully exported as long as demand/offer ratio is unbalanced at world level. Import and export price have substantially increased. At present, the EU is the 2nd silk products exporter in the world. The new E.U. policy strategy regarding sericiculture is focused on the stimulation of silk worm rearing for producing cocoons mainly in Bulgaria, Greece, Italy, Spain, France and Romania where climate conditions are favorable, it is a long tradition in the field and rural population needs jobs. At the same time, the E.U. is focused on technology improvement and silk product design in order to create more value added and increase export and sales.

  18. Logistics Reduction: Advanced Clothing System (ACS)

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the Advanced Exploration System (AES) Logistics Reduction (LR) project's Advanced Clothing System (ACS) is to use advanced commercial off-the-shelf...

  19. Vocational Home Economics Curriculum Guide for Occupational Clothing and Textiles.

    Science.gov (United States)

    Dewald, Margaret R.

    The training program outlined in this guide focuses upon the development of students for gainful employment through a two-year course of study in clothing and textiles. Instructional topics are provided in six areas: clothing and textiles careers; alterationist; custom dressmaker; industrial sewing; getting, keeping, and using the paycheck; and…

  20. Use of a human skin in vitro model to investigate the influence of 'every-day' clothing and skin surface decontamination on the percutaneous penetration of organophosphates.

    Science.gov (United States)

    Moore, C A; Wilkinson, S C; Blain, P G; Dunn, M; Aust, G A; Williams, F M

    2014-08-17

    Organophosphates (OPs) are widely used in agriculture. Many studies have investigated the capability of personal protective equipment (PPE) to reduce chemical exposure; however, investigations into the protective effect of 'every-day' clothing are rare. The purpose of this study was to investigate the protective effect of 'every-day' clothing against dermal exposure and to measure early decontamination of skin following exposure to chlorpyrifos and dichlorvos. Using human skin in vitro, absorption of (14)C-labelled chlorpyrifos (500 ng/cm(2)), was shown to be significantly reduced when applied to clothed skin (cotton shirt), regardless of application vehicle (isopropanol (IPA) or propylene glycol (PG)). The majority of applied dose was retained within the clothing after 4 h exposure. Significant reduction in absorption of chlorpyrifos (in PG) was seen through clothed skin when supplemented with skin decontamination at 4 h, compared with clothed skin decontaminated after 24 h, however, this was not observed with IPA. Absorption of dichlorvos (5 μg/cm(2)) was greater through unclothed skin than chlorpyrifos for all vehicles (IPA, isopropyl myristate (IPM) and PG). Significant reduction in absorption was observed when decontaminating clothed skin at 30 min, compared with decontamination at 24 h (post-exposure) for all vehicles. indicate that 'every-day' clothing is effective at reducing exposure to chemicals in contact with skin. Washing the skin surface immediately following removal of exposed clothing can further reduce exposure, depending on the properties of the chemical and vehicle applied. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  1. REACTION OF THE FEMALE BODY TO STRESS IN A CHEMICAL PROTECTIVE CLOTHING

    Directory of Open Access Journals (Sweden)

    Jiří SLABOTINSKÝ

    2016-12-01

    Full Text Available This article deals with the reaction of the female body to the use of an insulation chemical protective clothing combined with working – thermal and mental stress to which the female is exposed. The article provides a concise overview of protective chemical clothings and factors affecting their comfort; it describes the regularities corresponding to the physiological reaction, important for the body’s reaction to the use of a chemical protective clothing. Further, the article contains a description of the measurement and evaluation of physiological parameters of non-acclimated women during testing of these clothings and, finally, comparison with the results for males under the same stress which is unfavourable for women.

  2. The rectal temperature estimation method based on tympanic temperature for workers wearing protective clothing in nuclear facilities

    International Nuclear Information System (INIS)

    Takahashi, Naoki; Lee, Joo-Young; Wakabayashi, Hitoshi; Tochihara, Yutaka

    2012-01-01

    At nuclear facilities, workers wear impermeable protective clothing to prevent radioactive contamination during inspection and maintenance activities. The heat stroke risk of the workers wearing protective clothing gradually increases, because of retaining heat and humidity inside of protective clothing. Normally, the rectal temperature is used to manage the heat stroke risk. But the rectal temperature measurement is very difficult at the working place. We have already reported that the measurement of infrared tympanic temperature is more realistic than that of rectal temperature to manage the heat stroke risk. But tympanic temperature indicates high temperature compared to rectal temperature. So, the use of the tympanic temperature overestimates core temperature and decreases the work efficiency. Therefore, we attempted to make formulas to predict rectal temperature from measured tympanic temperature, and to use calculated rectal temperature for safer and more efficient management. The rectal temperature predicted with the formulas agreed with the actual measurement within the range of measurement error (±0.1degC). Combination of tympanic temperature measurement and heat rate evaluation enabled the safer management of the heat stroke risk with wearing protective clothing. (author)

  3. Procedures to evaluate the efficiency of protective clothing worn by operators applying pesticide.

    Science.gov (United States)

    Espanhol-Soares, Melina; Nociti, Leticia A S; Machado-Neto, Joaquim Gonçalves

    2013-10-01

    The evaluation of the efficiency of whole-body protective clothing against pesticides has already been carried out through field tests and procedures defined by international standards, but there is a need to determine the useful life of these garments to ensure worker safety. The aim of this article is to compare the procedures for evaluating efficiency of two whole-body protective garments, both new and previously used by applicators of herbicides, using a laboratory test with a mannequin and in the field with the operator. The evaluation of the efficiency of protective clothing used both quantitative and qualitative methodologies, leading to a proposal for classification according to efficiency, and determination of the useful life of protective clothing for use against pesticides, based on a quantitative assessment. The procedures used were in accordance with the standards of the modified American Society for Testing and Materials (ASTM) F 1359:2007 and International Organization for Standardization 17491-4. The protocol used in the field was World Health Organization Vector Biology and Control (VBC)/82.1. Clothing tested was personal water repellent and pesticide protective. Two varieties of fabric were tested: Beige (100% cotton) and Camouflaged (31% polyester and 69% cotton). The efficiency in exposure control of the personal protective clothing was measured before use and after 5, 10, 20, and 30 uses and washes under field conditions. Personal protective clothing was worn by workers in the field during the application of the herbicide glyphosate on weed species in mature sugar cane plantations using a knapsack sprayer. The modified ASTM 1359:2007 procedure was chosen as the most appropriate due to its greater repeatability (lower coefficient of variation). This procedure provides quantitative evaluation needed to determine the efficiency and useful life of individual protective clothing, not just at specific points of failure, but according to dermal

  4. ENERGY STAR Certified Residential Clothes Washers

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 8.0 ENERGY STAR Program Requirements for Clothes Washers that are effective as of...

  5. ENERGY STAR Certified Commercial Clothes Washers

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 8.0 ENERGY STAR Program Requirements for Clothes Washers that are effective as of...

  6. NATO Advanced Study Institute on Defence-related Intelligent Textiles and Clothing for Ballistic and NBC Protection

    CERN Document Server

    Jayaraman, Sundaresan; Intelligent textiles and clothing for ballistic and NBC protection

    2012-01-01

    This volume describes the latest developments in protective clothing against nearly any kind of threat for both military and civilians. It deals with protection through the use of nanotechnology, interactive clothing and biotechnological processes. Factors such as comfort and ballistics are also considered in the book, and several practical examples are discussed. All papers are written by leading experts in their respective fields. Professionals and students alike will benefit from the knowledge and expertise imparted in these outstanding contributions.

  7. This Specialty Line of Clothing Really Is the "Bee's Knees"

    Science.gov (United States)

    Hollingsworth, Jan Carter

    2009-01-01

    This article features "Bee's Knees," a specialty line of clothing. While not the typical product one would think of when considering mobility equipment, this line of clothing certainly does aid in helping those with disabilities access their world more safely and comfortably. "Bee's Knees" offers pint-sized pants made of kid-friendly, durable…

  8. Numerical simulation of thermal behaviors of a clothed human body with evaluation of indoor solar radiation

    International Nuclear Information System (INIS)

    Mao, Aihua; Luo, Jie; Li, Yi

    2017-01-01

    Highlights: • Solar radiation evaluation is integrated with the thermal transfer in clothed humans. • Thermal models are developed for clothed humans exposed in indoor solar radiation. • The effect of indoor solar radiation on humans can be predicted in different situations in living. • The green solar energy can be efficiently utilized in the building development. - Abstract: Solar radiation is a valuable green energy, which is important in achieving a successful building design for thermal comfort in indoor environment. This paper considers solar radiation indoors into the transient thermal transfer models of a clothed human body and offers a new numerical method to analyze the dynamic thermal status of a clothed human body under different solar radiation incidences. The evaluation model of solar radiation indoors and a group of coupled thermal models of the clothed human body are developed and integrated. The simulation capacities of these integrated models are validated through a comparison between the predicted results and the experimental data in reference. After that, simulation cases are also conducted to show the influence of solar radiation on the thermal status of individual clothed body segments when the human body is staying indoors in different seasons. This numerical simulation method provides a useful tool to analyze the thermal status of clothed human body under different solar radiation incidences indoors and thus enables the architect to efficiently utilize the green solar energy in building development.

  9. Thermal comfort sustained by cold protective clothing in Arctic open-pit mining-a thermal manikin and questionnaire study.

    Science.gov (United States)

    Jussila, Kirsi; Rissanen, Sirkka; Aminoff, Anna; Wahlström, Jens; Vaktskjold, Arild; Talykova, Ljudmila; Remes, Jouko; Mänttäri, Satu; Rintamäki, Hannu

    2017-12-07

    Workers in the Arctic open-pit mines are exposed to harsh weather conditions. Employers are required to provide protective clothing for workers. This can be the outer layer, but sometimes also inner or middle layers are provided. This study aimed to determine how Arctic open-pit miners protect themselves against cold and the sufficiency, and the selection criteria of the garments. Workers' cold experiences and the clothing in four Arctic open-pit mines in Finland, Sweden, Norway and Russia were evaluated by a questionnaire (n=1,323). Basic thermal insulation (I cl ) of the reported clothing was estimated (ISO 9920). The I cl of clothing from the mines were also measured by thermal manikin (standing/walking) in 0.3 and 4.0 m/s wind. The questionnaire showed that the I cl of the selected clothing was on average 1.2 and 1.5 clo in mild (-5 to +5°C) and dry cold (-20 to -10°C) conditions, respectively. The I cl of the clothing measured by thermal manikin was 1.9-2.3 clo. The results show that the Arctic open-pit miners' selected their clothing based on occupational (time outdoors), environmental (temperature, wind, moisture) and individual factors (cold sensitivity, general health). However, the selected clothing was not sufficient to prevent cooling completely at ambient temperatures below -10°C.

  10. The issue of thermal comfort of medical clothing in the operating room

    OpenAIRE

    Abreu, Isabel; Ribeiro, Patrícia; Abreu, Maria José

    2017-01-01

    Abstract Medical clothes have the primary function of protection. However this function must be correlated with a good comfort experience to the user. The comfort is a very important issue, since professionals are exposed to stress situations that can influence, negatively, their performance work. More specific, thermal comfort plays a crucial role for the best performance of OR medical clothing, involving heat regulation and mass transfer between a clothed body and the environment, once clot...

  11. ENERGY STAR Certified Residential Clothes Dryers

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.1 ENERGY STAR Program Requirements for Clothes Dryers that are effective as of January...

  12. A comprehensive approach to evaluating and classifying sun-protective clothing.

    Science.gov (United States)

    Downs, N J; Harrison, S L

    2018-04-01

    National standards for clothing designed to protect the wearer from the harmful effects of solar ultraviolet radiation (UVR) have been implemented in Australia/New Zealand, Europe and the U.S.A. Industry standards reflect the need to protect the skin by covering a considerable proportion of the potentially exposed body surface area (BSA) and by reducing UVR-transmission through fabric (the Ultraviolet Protection Factor; UPF). This research aimed to develop a new index for rating sun-protective clothing that incorporates the BSA coverage of the garment in addition to the UPF of the fabric. A mannequin model was fixed to an optical bench and marked with horizontal lines at 1-cm intervals. An algorithm (the Garment Protector Factor; GPF) was developed based on the number of lines visible on the clothed vs. unclothed mannequin and the UPF of the garment textile. This data was collected in 2015/16 and analysed in 2016. The GPF weights fabric UPF by BSA coverage above the minimum required by international sun-protective clothing standards for upper-body, lower-body and full-body garments. The GPF increases with BSA coverage of the garment and fabric UPF. Three nominal categories are proposed for the GPF: 0 ≤ GPF garments that 'meet' minimum standards; 3 ≤ GPF garments providing 'good' sun protection; and GPF ≥ 6 indicating 'excellent' protection. Adoption of the proposed rating scheme should encourage manufacturers to design sun-protective garments that exceed the minimum standard for BSA coverage, with positive implications for skin cancer prevention, consumer education and sun-protection awareness. © 2017 British Association of Dermatologists.

  13. Drug smuggling using clothing impregnated with cocaine.

    Science.gov (United States)

    McDermott, Seán D; Power, John D

    2005-11-01

    A case study is presented where a woman travelling from South America to the Republic of Ireland was detained at Dublin Airport and articles of clothing she had in her luggage were found to be impregnated with cocaine. The study shows that the amount of powder recovered from the garments was approximately 14% of the total weight of the garments. The cocaine was in the form of cocaine hydrochloride and the purity was approximately 80%. An examination of the garments under filtered light highlighted the areas exposed to cocaine and indicated that the method of impregnation was by pouring liquid containing cocaine onto the clothing.

  14. Microfibrous metallic cloth for acoustic isolation of a MEMS gyroscope

    Science.gov (United States)

    Dean, Robert; Burch, Nesha; Black, Meagan; Beal, Aubrey; Flowers, George

    2011-04-01

    The response of a MEMS device that is exposed to a harsh environment may range from an increased noise floor to a completely erroneous output to temporary or even permanent device failure. One such harsh environment is high power acoustic energy possessing high frequency components. This type of environment sometimes occurs in small aerospace vehicles. In this type of operating environment, high frequency acoustic energy can be transferred to a MEMS gyroscope die through the device packaging. If the acoustic noise possesses a sufficiently strong component at the resonant frequency of the gyroscope, it will overexcite the motion of the proof mass, resulting in the deleterious effect of corrupted angular rate measurement. Therefore if the device or system packaging can be improved to sufficiently isolate the gyroscope die from environmental acoustic energy, the sensor may find new applications in this type of harsh environment. This research effort explored the use of microfibrous metallic cloth for isolating the gyroscope die from environmental acoustic excitation. Microfibrous cloth is a composite of fused, intermingled metal fibers and has a variety of typical uses involving chemical processing applications and filtering. Specifically, this research consisted of experimental evaluations of multiple layers of packed microfibrous cloth composed of sintered nickel material. The packed cloth was used to provide acoustic isolation for a test MEMS gyroscope, the Analog Devices ADXRS300. The results of this investigation revealed that the intermingling of the various fibers of the metallic cloth provided a significant contact area between the fiber strands and voids, which enhanced the acoustic damping of the material. As a result, the nickel cloth was discovered to be an effective acoustic isolation material for this particular MEMS gyroscope.

  15. A History of Court and Commoner Clothing in Vietnam

    Directory of Open Access Journals (Sweden)

    Liam C. Kelley

    2016-09-01

    Full Text Available Trần Quang Đức. Ngàn năm áo mũ: Lich sử trang phục Việt Nam giai đoạn 1009–1945 [One thousand years of caps and robes: A history of Vietnamese clothing in the period 1009–1945]. TP Hồ Chí Minh: Nhã Nam, 2013. ISBN: 1467557900. Đức documents in incredible detail the history of the sartorial decisions made at various Vietnamese courts, from Quyền’s time until the end of the Nguyễn dynasty. Based on an extensive examination of Vietnamese, Chinese, European, and even Korean sources—most of which only briefly mention clothing in various periods—Đức has succeeded in producing a comprehensive overview of the clothing of Vietnamese rulers and their officials; when possible, he also comments on the dress of other segments of society, such as the military and commoners. One Thousand Years of Caps and Robes devotes a chapter to each Vietnamese dynasty: the Lý, the Trần, the Lê, the Tây Sơn, and the Nguyễn. Đức begins each chapter with an overview of the history of that dynasty’s styles of court dress and then goes into a detailed description of exactly which types of cap and robe the ruler and his officials wore, and in what ways these caps and robes extended previous practices or were innovations. He follows his examination of court dress with a discussion of military and commoner attire. The chapter introductions provide a concise history of changes in court clothing across time, while the detailed discussions of the caps and robes from each period offer a deeper level of understanding...

  16. GLOBALIZATION AND THE COMPETITIVENESS OF THE EUROPEAN TEXTILE AND CLOTHING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Girneata Adriana

    2015-07-01

    Full Text Available The aim of the paper is to analyze the competitiveness of the European textile and clothing industry under the influence of globalization and recent economic crisis. The textile and clothing industry is an important part of the European manufacturing industry, playing a vital role in the economy and social welfare in many regions of Europe. The European textile and clothing industry has undergone significant changes in recent decades due to the technological advances, developments in production costs, the emergence major international competitors and the elimination import quotas after 2005. In response to the competitive challenges, this sector of activity has undertaken a lengthy process of restructuring and modernization. Globalization and technological progress have led to rethinking the strategy of the companies in the industry. In a competitive global market, European organizations producing textiles and garments have as main competitive advantage research and continuous innovation. Using methods of qualitative research, this paper analyses the evolution of the main financial indicators concerning this sector of activity in the period 2007 – 2013, including domestic consumption, turnover, number of employees, number of companies, imports and exports. The globalization of markets, international outsourcing and development of the Internet had a major impact on the structure and dynamics of the textile and clothing industry in Europe, and in particular on small and medium enterprises. Also, relocation, subcontracting and outsourcing of large brands in this domain have contributed significantly to the increase of imports from low-cost countries. A growing number of apparel retailers have emerged on the market, organizing supply chains globally. At the same time, producers have transferred part of their activities to low-cost countries in order to maintain market competitiveness. This was determined by the major differences in salaries across

  17. Soldiers for the virtual battlefield : Even at secondary school, Jan Paul van Waveren spent more time on computer games than on his homework, though he doesn't seem to have suffered from it

    NARCIS (Netherlands)

    Van Waveren, J.P.; Rothkrantz, L.; Jongeneel, C.

    2001-01-01

    Even at secondary school, Jan Paul van Waveren spent more time on computer games than on his homework,though he doesnt seem to have suffered from it. At university he spent some of his time linking up personal computers with his friends, trying to blast each other to virtual smithereens in a game of

  18. The MAFF dry cloth collector programme for monitoring airborne radioactivity

    International Nuclear Information System (INIS)

    McHugh, J.O.; Smith, B.D.; Hunt, G.J.; Thomas, R.E.G.

    1986-01-01

    The history of the MAFF airborne radioactivity monitoring programme and its current operation using dry cloth collectors are described. The detection system has become well established as a sensitive indicator of airborne radioactivity. Details of collector materials, deployment around the major UK nuclear establishments and procedures for radiometric analysis of cloths are given. Typical results for the period 1980-82 show that at most sites only nuclear weapons fallout was detected. The systems's usefulness is exemplified by its response to the release of I-131 from Sellafield in 1981; this release was of negligible radiological significance but was easily detected. The response of dry cloths to various sources of atmospheric radioactivity and factors affecting collection efficiency are discussed. (author)

  19. Wearing Evaluation of Fast Fashion Brand & Conventional Brand Clothes by Elderly Day-Care Subjects

    OpenAIRE

    孫, 珠煕(孫 珠熙)

    2014-01-01

    In this study, 75 elderly people in day care participated in a mini fashion show as models and evaluated the clothes they wore. The clothes were selected by the elderly themselves from among 51 samples of five different themes, including fast fashion brands and conservative brands. Among the five themes, the elderly liked fast fashion brands most (61.3%). Few of them considered costly clothes a status symbol, and many tended to like distinctive-looking trendy clothes. A covariance structure a...

  20. Ergonomics principles to design clothing work for electrical workers in Colombia.

    Science.gov (United States)

    Castillo, Juan; Cubillos, A

    2012-01-01

    The recent development of the Colombian legislation, have been identified the need to develop protective clothing to work according to specifications from the work done and in compliance with international standards. These involve the development and design of new strategies and measures for work clothing design. In this study we analyzes the activities of the workers in the electrical sector, the method analyzes the risks activity data in various activities, that activities include power generation plants, local facilities, industrial facilities and maintenance of urban and rural networks. The analyses method is focused on ergonomic approach, risk analysis is done, we evaluate the role of security expert and we use a design algorithm developed for this purpose. The result of this study is the identification of constraints and variables that contribute to the development of a model of analysis that leads to the development the work protective clothes.

  1. Reality in Virtual Learning

    DEFF Research Database (Denmark)

    Lindberg, Frank; Pettersson, Michael

    professors most often decide what and when one could learn by providing the context and substance. In this perspective, the student has a role which is close to the one of a passive receiver, and s/he is mainly preoccupied with the problem of generating substance in memory most efficiently. Today, technology......-time educational logic. There are fewer attempts to use ICT according to a different pedagogical perspective than the old professor authoritarian model. The purpose of this paper is to illuminate some challenges virtual students experience when facing a new ICT-based learning situation. We will try to explore...... and develop understandings of what it might mean to be a student when learning occurs within a virtual problem based learning landscape. When students are used to the traditional classroom, challenges appear in the twilight zone between two pedagogical practices. How do the students cope with challenges...

  2. 76 FR 22324 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-04-21

    ... standards, the current standards for room air conditioners and clothes dryers, and the history of the... Residential Clothes Dryers and Room Air Conditioners AGENCY: Office of Energy Efficiency and Renewable Energy... equipment, including residential clothes dryers and room air conditioners. EPCA also requires the U.S...

  3. Hot topic - fire resistant clothing for electrical workers has no Canadian standard

    Energy Technology Data Exchange (ETDEWEB)

    Douglas, R

    1996-07-01

    Fabrics which could be used for protective clothing for electrical workers was discussed. In Canada there are no stringent clothing rules for the electrical industry, but in the United States, the Federal Occupational Safety and Health Administration (OSHA) have made protective clothing an issue within the industry. Dupont`s Nomex, Westex`s Indura, and Hoechst Celanese`s PBI fibres are among the materials which have been through a series of thermal protection tests and are based on proven materials which are now being applied to work wear. The testing standards cover the ignition of the basic materials, untreated cottons, wools, and the thermal protection of flame resistant materials. The final tests are based on high current arc tests conducted on the fabrics used in the industry. These tests are now being conducted at Ontario Hydro`s High Current Test Facility preliminary to a Canadian standard being formulated and proposed in the very near future. 2 figs.

  4. Virtual Accelerator for Accelerator Optics Improvement

    CERN Document Server

    Yan Yi Ton; Decker, Franz Josef; Ecklund, Stanley; Irwin, John; Seeman, John; Sullivan, Michael K; Turner, J L; Wienands, Ulrich

    2005-01-01

    Through determination of all quadrupole strengths and sextupole feed-downs by fitting quantities derivable from precision orbit measurement, one can establish a virtual accelerator that matches the real accelerator optics. These quantities (the phase advances, the Green's functions, and the coupling eigen-plane ellipses tilt angles and axis ratios) are obtained by analyzing turn-by-turn Beam Position Monitor (BPM) data with a model-independent analysis (MIA). Instead of trying to identify magnet errors, a limited number of quadrupoles are chosen for optimized strength adjustment to improve the virtual accelerator optics and then applied to the real accelerator accordingly. These processes have been successfully applied to PEP-II rings for beta beating fixes, phase and working tune adjustments, and linear coupling reduction to improve PEP-II luminosity.

  5. New advances in protection against solar ultraviolet radiation in textiles for summer clothing.

    Science.gov (United States)

    Aguilera, José; de Gálvez, María Victoria; Sánchez-Roldán, Cristina; Herrera-Ceballos, Enrique

    2014-01-01

    Clothing is considered one of the most important tools for photoprotection against harmful solar ultraviolet radiation (UVR). The standard for sun-protective clothing is based on erythema despite other biological effects of UVR on the skin. We analyzed the potential protection against UVR in fabrics destined for summer clothing based on several action spectra. We examined 50 garments classified by type of fabric composition, structure of the fiber yarn and color. The ultraviolet protection factor was calculated based on fabric ultraviolet transmittance corrected for erythema according to the EU standard E-13758 as well as the UVA transmittance of fabrics. UVR protection was also analyzed in base of different action spectra as for previtamin D3, nonmelanoma skin cancer, photoimmunosuppression and photoaging. Most knitted fabrics used for sports T-shirts offered excellent ratings for ultraviolet protection while normal shirts showed very low ratings, particularly against photoaging. The cover is the most influential variable in fabric photoprotection, having an exponential relationship with the UPF. The relation between cover and UVA protection was linearly negative. Information about ultraviolet protection in textiles used for summer clothing should be included in labeling as some types of fabrics, especially those used for shirts, offer very low UVR protection. © 2014 The American Society of Photobiology.

  6. Wearable sensors in intelligent clothing for measuring human body temperature based on optical fiber Bragg grating.

    Science.gov (United States)

    Li, Hongqiang; Yang, Haijing; Li, Enbang; Liu, Zhihui; Wei, Kejia

    2012-05-21

    Measuring body temperature is considerably important to physiological studies as well as clinical investigations. In recent years, numerous observations have been reported and various methods of measurement have been employed. The present paper introduces a novel wearable sensor in intelligent clothing for human body temperature measurement. The objective is the integration of optical fiber Bragg grating (FBG)-based sensors into functional textiles to extend the capabilities of wearable solutions for body temperature monitoring. In addition, the temperature sensitivity is 150 pm/°C, which is almost 15 times higher than that of a bare FBG. This study combines large and small pipes during fabrication to implant FBG sensors into the fabric. The law of energy conservation of the human body is considered in determining heat transfer between the body and its clothing. The mathematical model of heat transmission between the body and clothed FBG sensors is studied, and the steady-state thermal analysis is presented. The simulation results show the capability of the material to correct the actual body temperature. Based on the skin temperature obtained by the weighted average method, this paper presents the five points weighted coefficients model using both sides of the chest, armpits, and the upper back for the intelligent clothing. The weighted coefficients of 0.0826 for the left chest, 0.3706 for the left armpit, 0.3706 for the right armpit, 0.0936 for the upper back, and 0.0826 for the right chest were obtained using Cramer's Rule. Using the weighting coefficient, the deviation of the experimental result was ± 0.18 °C, which favors the use for clinical armpit temperature monitoring. Moreover, in special cases when several FBG sensors are broken, the weighted coefficients of the other sensors could be changed to obtain accurate body temperature.

  7. SUPPLY –CHAIN AND LOGIC MODELS FOR THE TEXTILE AND CLOTHING COMPANIES

    Directory of Open Access Journals (Sweden)

    VISILEANU Emilia

    2014-05-01

    Full Text Available The textile and clothing industry is characterized by specific supply-chain models with companies situated in a complex cluster type structure. Depending on the size, the volume and the variety of production, companies can be classified as follows: large companies, griffes, medium size companies and subcontracting companies. The logic of companies is defined by the main feature of the textile and clothing field, namely the logic of collections, determined by the seasonality and classified into several types: planning, fast-fashion, fast fashion/ planning. The market share defined by stylistic content, product quality and price determine their typology: mass-market, bridge, diffusion, prêt-a-porter/haute-couture. The study conducted on a number of companies in the textile-clothing industry revealed the following: high share of SMEs (75%, dominant role of garments in the production (74.5%, fast-fashion logic of imitating companies is predominant (94% and mass-market type products have the highest market share (71%. Success in national and international challenges that must be faced by the textile - clothing sector: complete liberalization of world trade, the implementation of quality standards, the adoption of the EU Customs Code and relocation can be provided only by changing the supply -chain models and business strategies with a focus on short series products with high customization and fictionalization, new models of e-commerce services, e-business, etc

  8. Virtually teaching virtual leadership

    DEFF Research Database (Denmark)

    Henriksen, Thomas Duus; Nielsen, Rikke Kristine; Børgesen, Kenneth

    2017-01-01

    This paper seeks to investigate the challenges to virtual collaboration and leadership on basis of findings from a virtual course on collaboration and leadership. The course used for this experiment was designed as a practical approach, which allowed participants to experience curriculum phenomena....... This experimental course provided insights into the challenges involved in virtual processes, and those experiences where used for addressing the challenges that virtual leadership is confronted with. Emphasis was placed on the reduction of undesired virtual distance and its consequences through affinity building....... We found that student scepticism appeared when a breakdown resulted in increasing virtual distance, and raises questions on how leaders might translate or upgrade their understandings of leadership to handling such increased distance through affinity building....

  9. Measurements of dermal uptake of nicotine directly from air and clothing

    DEFF Research Database (Denmark)

    Beko, G.; Morrison, G.; Weschler, Charles J.

    2017-01-01

    In this preliminary study, we have investigated whether dermal uptake of nicotine directly from air or indirectly from clothing can be a meaningful exposure pathway. Two participants wearing only shorts and a third participant wearing clean cotton clothes were exposed to environmental tobacco smo...

  10. The evaluation of (social-)psychological comfort in clothing, a possible approach

    Science.gov (United States)

    Matté, L. L.; Broega, A. C.

    2017-10-01

    This paper presents the first results of a PhD research on psychological comfort of clothing. In order to understand and conceptualize the psychological aspects of clothing comfort, a variation of the Delphi Method was used to seek opinions from experts. This method was chosen because of its consensus-building features. The results were obtained from a qualitative text analysis, conducted over the experts’ responses to the first round of questions. The analytic process shed some light on the formation of the psychological comfort concept as well as the potential attributes to be evaluated when assessing this comfort dimension.

  11. Skin Sensitive Difference of Human Body Sections under Clothing-Smirnov Test of Skin Surface Temperatures' Dynamic Changing

    Institute of Scientific and Technical Information of China (English)

    LI Jun; WU Hai-yan; WANG Yun-yi

    2004-01-01

    Skin sensitive difference of human body sections under clothing is the theoretic foundation of thermal insulation clothing design.By a new method of researching on clothing comfort perception,the skin temperature live changing procedure of human body sections affected by the same cold stimulation is inspected.Furthermore with the Smirnov test the skin temperatures dynamic changing patterns of main human body sections are obtained.

  12. Evaluation of two recommended disinfection methods for cleaning cloths used in food services of southern Brazil.

    Science.gov (United States)

    Bartz, Sabrina; Tondo, Eduardo Cesar

    2013-01-01

    In the State of Rio Grande do Sul (RS), Southern Brazil, a good manufacturing practices regulation was published recommending two disinfection methods for cleaning cloths used in food services. The aim of the present study was to evaluate the efficacy of those methods. Cleaning cloths were sampled without prior notice at food services, on common working days. For the analyses, the cloths were divided in two sub-samples, being one of them microbiologically analyzed. The second sub-sample was further divided in two pieces and submitted to hand washing for two minutes. After that, one piece was boiled in water for 15 min and the other one was soaked in a 200 ppm sodium hypochlorite solution for 15 min. Both pieces of cloth were submitted to microbiological analyses. Cleaning cloths presented total aerobic mean counts of 6.9 ± 6.7 log/cm(2). All cleaning cloths presented coliform contamination, and 40% demonstrated mean counts of 6.2 ± 5.6 log/cm(2). Presumptive S. aureus mean counts of 5.5 ± 4.9 log/cm(2) were found. No statistic correlation was observed among the number of meals served daily in the food services and the microbiological contamination levels. After washing and disinfection, microbiological counts were significantly (p disinfect cleaning cloths used in food services.

  13. A Radiation Learning Support System by Tri-sensory Augmented Reality using a Mobile Phone

    International Nuclear Information System (INIS)

    Shimoda, Hiroshi; Zhao, Yue; Yan, Weida; Ishii, Hirotake

    2011-01-01

    A radiation learning support system has been developed to support learning basic knowledge of radiation and its influence on the human body by using tri-sensory Augmented Reality (AR) technology with presenting information to visual, auditory and tactile sensation. The system consists of a knowledge learning mode in which learners can learn basic knowledge of radiation and an experience learning mode in which they can virtually experience its influence on the human body under various conditions. As the result of a simple evaluation, it was suggested that the system improves the learners' intuitive understanding, and information presentation to auditory and tactile sensation is more effective than that to visual sensation

  14. A study on development of virtual panel and virtual collaboration system

    International Nuclear Information System (INIS)

    Yoo, H. J.; Park, S. Y.; Lee, M. S.; Hong, J. H.

    2001-01-01

    The Nuclear I and C group of KEPRI has been peforming research and development on the VRCATS, Virtual Reality based Computer Assisted Training System. For the past two years, we have developed the first VRCATS for Youngkwang 1 nuclear power plant. Currently, we are developing an advanced VRCATS for Uljin 3 nuclear power plant. In this paepr, we will describe virtual panel system and VR based collaborate training system (VRCATS) of the Uljin VRCATS. Since Virtual Panel provides the same environment as the real MCR, trainees can expect the same training effect with Virtual Panel as they do with full scope simulator. i.e., trainees can check key variables and operate the plants and get responses with Virtual Panel. VRCTS provides another realistic training environment for trainees. In VRCATS, for example, operators in a group can work together t handle LOCA (Loss of Coolant Accident) according to emergency operation procedures

  15. Tritium protective clothing

    International Nuclear Information System (INIS)

    Fuller, T.P.; Easterly, C.E.

    1979-06-01

    Occupational exposures to radiation from tritium received at present nuclear facilities and potential exposures at future fusion reactor facilities demonstrate the need for improved protective clothing. Important areas relating to increased protection factors of tritium protective ventilation suits are discussed. These areas include permeation processes of tritium through materials, various tests of film permeability, selection and availability of suit materials, suit designs, and administrative procedures. The phenomenological nature of film permeability calls for more standardized and universal test methods, which would increase the amount of directly useful information on impermeable materials. Improvements in suit designs could be expedited and better communicated to the health physics community by centralizing devlopmental equipment, manpower, and expertise in the field of tritium protection to one or two authoritative institutions

  16. Tritium protective clothing

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, T. P.; Easterly, C. E.

    1979-06-01

    Occupational exposures to radiation from tritium received at present nuclear facilities and potential exposures at future fusion reactor facilities demonstrate the need for improved protective clothing. Important areas relating to increased protection factors of tritium protective ventilation suits are discussed. These areas include permeation processes of tritium through materials, various tests of film permeability, selection and availability of suit materials, suit designs, and administrative procedures. The phenomenological nature of film permeability calls for more standardized and universal test methods, which would increase the amount of directly useful information on impermeable materials. Improvements in suit designs could be expedited and better communicated to the health physics community by centralizing devlopmental equipment, manpower, and expertise in the field of tritium protection to one or two authoritative institutions.

  17. STDP-based behavior learning on the TriBot robot

    Science.gov (United States)

    Arena, P.; De Fiore, S.; Patané, L.; Pollino, M.; Ventura, C.

    2009-05-01

    This paper describes a correlation-based navigation algorithm, based on an unsupervised learning paradigm for spiking neural networks, called Spike Timing Dependent Plasticity (STDP). This algorithm was implemented on a new bio-inspired hybrid mini-robot called TriBot to learn and increase its behavioral capabilities. In fact correlation based algorithms have been found to explain many basic behaviors in simple animals. The main interesting consequence of STDP is that the system is able to learn high-level sensor features, based on a set of basic reflexes, depending on some low-level sensor inputs. TriBot is composed of 3 modules, the first two being identical and inspired by the Whegs hybrid robot. The peculiar characteristics of the robot consists in the innovative shape of the three-spoke appendages that allow to increase stability of the structure. The last module is composed of two standard legs with 3 degrees of freedom each. Thanks to the cooperation among these modules, TriBot is able to face with irregular terrains overcoming potential deadlock situations, to climb high obstacles compared to its size and to manipulate objects. Robot experiments will be reported to demonstrate the potentiality and the effectiveness of the approach.

  18. ELECTRICITY SAVINGS BY IMPLEMENTING ENERGY EFFICIENCY STANDARDS AND LABELS FOR CLOTHES WASHERS IN MALAYSIA

    Directory of Open Access Journals (Sweden)

    ABU SALEH AHMED

    2011-02-01

    Full Text Available Clothes washers being one of the energy consuming household appliances in Malaysia have become a target for energy efficiency improvements. In the present study, a series of experiment investigations have been conducted on six clothes washers of varying capacities. The objectives are to develop the standards and labels. The test has been performed according to IEC (International Electrotechnical Commision clothes washers test specification. Using the experimental data, a baseline standard has been developed by statistical method. From the baseline standards, 10% standards have been developed. The baseline unit energy consumption was calculated to be 32 Wh/kg/cycle (average unit energy consumption of the six models and on the basis of baseline unit, standard unit energy consumption had been proposed to be 29 Wh/kg/cycle. It has been estimated with the introduction of minimum energy efficiency standards for clothes washer 38077037.46 kWh of energy could be saved per year. To develop a comprehensive energy guide labels, three labels had been design, which were star labeling, speedometer labeling and letter bin labeling. A survey was conducted with three different types of labels among the consumers and with the surveys respond, energy guide label of household clothes washers has been proposed for Malaysia. This is result from used of energy-efficient appliances product and is well positioned to promote more widespread efficient improvement.

  19. Protective clothing and hot particle control: EPRI workshop gives the issues an airing

    International Nuclear Information System (INIS)

    Owen, D.E.

    1990-01-01

    A recent workshop organized by the Electric Power Research Institute on Protective Clothing Topics and Hot Particle Control brought together working-level engineers, industry experts and vendors. Ideas arising from the accident recovery efforts at Three Mile Island were exchanged. Among the topics discussed were the role of fabric colour in the retention of radionuclides, modesty garments, laundering of protective clothing and worker heat stress. (author)

  20. Haptics for Virtual Reality and Teleoperation

    CERN Document Server

    Mihelj, Matjaž

    2012-01-01

    This book covers all topics relevant for the design of haptic interfaces and teleoperation systems. The book provides the basic knowledge required for understanding more complex approaches and more importantly it introduces all issues that must be considered for designing efficient and safe haptic interfaces. Topics covered in this book provide insight into all relevant components of a haptic system. The reader is guided from understanding the virtual reality concept to the final goal of being able to design haptic interfaces for specific tasks such as nanomanipulation.  The introduction chapter positions the haptic interfaces within the virtual reality context. In order to design haptic interfaces that will comply with human capabilities at least basic understanding of human sensors-motor system is required. An overview of this topic is provided in the chapter related to human haptics. The book does not try to introduce the state-of-the-art haptic interface solutions because these tend to change quickly. On...

  1. Fear no colors? Observer clothing color influences lizard escape behavior.

    Science.gov (United States)

    Putman, Breanna J; Drury, Jonathan P; Blumstein, Daniel T; Pauly, Gregory B

    2017-01-01

    Animals often view humans as predators, leading to alterations in their behavior. Even nuanced aspects of human activity like clothing color affect animal behavior, but we lack an understanding of when and where such effects will occur. The species confidence hypothesis posits that birds are attracted to colors found on their bodies and repelled by non-body colors. Here, we extend this hypothesis taxonomically and conceptually to test whether this pattern is applicable in a non-avian reptile and to suggest that species should respond less fearfully to their sexually-selected signaling color. Responses to clothing color could also be impacted by habituation to humans, so we examine whether behavior varied between areas with low and high human activity. We quantified the effects of four T-shirt colors on flight initiation distances (FID) and on the ease of capture in western fence lizards (Sceloporus occidentalis), and we accounted for detectability against the background environment. We found no differences in lizard behavior between sites. However, lizards tolerated the closest approaches and were most likely to be captured when approached with the T-shirt that resembled their sexually-selected signaling color. Because changes in individual behavior affect fitness, choice of clothing color by people, including tourists, hikers, and researchers, could impact wildlife populations and research outcomes.

  2. Human agency beliefs influence behaviour during virtual social interactions.

    Science.gov (United States)

    Caruana, Nathan; Spirou, Dean; Brock, Jon

    2017-01-01

    In recent years, with the emergence of relatively inexpensive and accessible virtual reality technologies, it is now possible to deliver compelling and realistic simulations of human-to-human interaction. Neuroimaging studies have shown that, when participants believe they are interacting via a virtual interface with another human agent, they show different patterns of brain activity compared to when they know that their virtual partner is computer-controlled. The suggestion is that users adopt an "intentional stance" by attributing mental states to their virtual partner. However, it remains unclear how beliefs in the agency of a virtual partner influence participants' behaviour and subjective experience of the interaction. We investigated this issue in the context of a cooperative "joint attention" game in which participants interacted via an eye tracker with a virtual onscreen partner, directing each other's eye gaze to different screen locations. Half of the participants were correctly informed that their partner was controlled by a computer algorithm ("Computer" condition). The other half were misled into believing that the virtual character was controlled by a second participant in another room ("Human" condition). Those in the "Human" condition were slower to make eye contact with their partner and more likely to try and guide their partner before they had established mutual eye contact than participants in the "Computer" condition. They also responded more rapidly when their partner was guiding them, although the same effect was also found for a control condition in which they responded to an arrow cue. Results confirm the influence of human agency beliefs on behaviour in this virtual social interaction context. They further suggest that researchers and developers attempting to simulate social interactions should consider the impact of agency beliefs on user experience in other social contexts, and their effect on the achievement of the application's goals.

  3. Human agency beliefs influence behaviour during virtual social interactions

    Directory of Open Access Journals (Sweden)

    Nathan Caruana

    2017-09-01

    Full Text Available In recent years, with the emergence of relatively inexpensive and accessible virtual reality technologies, it is now possible to deliver compelling and realistic simulations of human-to-human interaction. Neuroimaging studies have shown that, when participants believe they are interacting via a virtual interface with another human agent, they show different patterns of brain activity compared to when they know that their virtual partner is computer-controlled. The suggestion is that users adopt an “intentional stance” by attributing mental states to their virtual partner. However, it remains unclear how beliefs in the agency of a virtual partner influence participants’ behaviour and subjective experience of the interaction. We investigated this issue in the context of a cooperative “joint attention” game in which participants interacted via an eye tracker with a virtual onscreen partner, directing each other’s eye gaze to different screen locations. Half of the participants were correctly informed that their partner was controlled by a computer algorithm (“Computer” condition. The other half were misled into believing that the virtual character was controlled by a second participant in another room (“Human” condition. Those in the “Human” condition were slower to make eye contact with their partner and more likely to try and guide their partner before they had established mutual eye contact than participants in the “Computer” condition. They also responded more rapidly when their partner was guiding them, although the same effect was also found for a control condition in which they responded to an arrow cue. Results confirm the influence of human agency beliefs on behaviour in this virtual social interaction context. They further suggest that researchers and developers attempting to simulate social interactions should consider the impact of agency beliefs on user experience in other social contexts, and their effect

  4. Procedural Attack! Procedural Generation for Populated Virtual Cities: A Survey

    Directory of Open Access Journals (Sweden)

    Werner Gaisbauer

    2017-06-01

    Full Text Available On the one hand, creating rich virtual worlds "by hand" like in the game Grand Theft Auto V is hugely expensive and limited to large studios. On the other hand, procedural content generation (PCG allows tiny teams to create huge worlds like Hello Games did with only four people (in the beginning for the recently released game No Man's Sky. Following in the footsteps of Hello Games, this paper tries to equip the reader with an overview about the state-of-the-art of how to build such a virtual world, i.e., a populated virtual city with buildings, streets, parks, vegetation, humans, and vehicles, using just PCG assets. Each PCG asset that is envisioned to bring the city to life is grouped and discussed in detail and the latest research trends in PCG are presented together with open questions. Using the above-mentioned PCG assets, instead of months, a city can be built in a mere couple of minutes by a user without much experience in designing 3D assets. The city can then be used for many applications like games, virtual reality (VR, or film.

  5. Current steering and current focusing in cochlear implants: comparison of monopolar, tripolar, and virtual channel electrode configurations.

    NARCIS (Netherlands)

    Berenstein, C.K.; Mens, L.H.M.; Mulder, J.J.S.; Vanpoucke, F.J.

    2008-01-01

    OBJECTIVES: To compare the effects of Monopole (Mono), Tripole (Tri), and "Virtual channel" (Vchan) electrode configurations on spectral resolution and speech perception in a crossover design. DESIGN: Nine experienced adults who received an Advanced Bionics CII/90K cochlear implant participated in a

  6. Nano Copper Oxide-Modified Carbon Cloth as Cathode for a Two-Chamber Microbial Fuel Cell.

    Science.gov (United States)

    Dong, Feng; Zhang, Peng; Li, Kexun; Liu, Xianhua; Zhang, Pingping

    2016-12-09

    In this work, Cu₂O nanoparticles were deposited on a carbon cloth cathode using a facile electrochemical method. The morphology of the modified cathode, which was characterized by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) tests, showed that the porosity and specific surface area of the cathode improved with longer deposition times. X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV) results showed that cupric oxide and cuprous oxide coexisted on the carbon cloth, which improved the electrochemical activity of cathode. The cathode with a deposition time of 100 s showed the best performance, with a power density twice that of bare carbon cloth. Linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) results revealed that moderate deposition of nano copper oxide on carbon cloth could dramatically reduce the charge transfer resistance, which contributed to the enhanced electrochemical performance. The mediation mechanism of copper oxide nanocatalyst was illustrated by the fact that the recycled conversion between cupric oxide and cuprous oxide accelerated the electron transfer efficiency on the cathode.

  7. FY 1984 annual report on the research and development of automatic sewing systems. Cloth handling techniques; 1984 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-03-01

    The automatic sewing system technique research association has been commissioned by the Agency of Industrial Science and Technology for (research and development of automatic sewing systems). This program covers R and D of the elementary techniques for total systems and sewing preparation/processing, sewing/assembling, cloth handling, and system management/control. This report describes the results of the R and D efforts for the cloth handling techniques. The program for the cloth handling techniques covers all techniques related to cloth movement, positioning and processing in each sewing step from cloth receiving to completion of sewing. They include the elementary techniques for (1) cloth holding, (2) high-function positioning, and (3) soft cloth transfer. The program for the techniques (1) constructs, on a trial basis, the basic or functional models, and tests and evaluates them. The program for the techniques (2) classifies work shapes, processing types and processing steps, to help select the positioning methods. The program for the techniques (3) investigates necessary conditions for transfer methods and procedures in each step. (NEDO)

  8. Cultivating User-ship? Developing a Circular System for the Acquisition and Use of Baby Clothing

    DEFF Research Database (Denmark)

    Petersen, Trine Brun; Riisberg, Vibeke

    2017-01-01

    This paper sets out to explore the significance of the production, sale and consumption of clothing as a product service system rather than as the more familiar “shop-window” product offered for individual sale. While there are a number of studies of occupational clothing systems, relatively little...... is known about clothing systems tailored for the private market. This article presents a case study of a recently launched subscription service for baby clothing, which offered a range of eco-certified garments for rent as more or less complete wardrobes. Drawing on fashion scholar Kate Fletcher’s concept...... features are mutually constitutive and to how the system interconnects with practices of use and maintenance among subscribers with a special interest in laundry regimes and durability. Taking this empirical example as its point of departure, the article concludes with a discussion of how product qualities...

  9. Permethrin-Treated Clothing as Protection against the Dengue Vector, Aedes aegypti: Extent and Duration of Protection.

    Directory of Open Access Journals (Sweden)

    Sarah DeRaedt Banks

    Full Text Available Dengue transmission by the mosquito vector, Aedes aegypti, occurs indoors and outdoors during the day. Personal protection of individuals, particularly when outside, is challenging. Here we assess the efficacy and durability of different types of insecticide-treated clothing on laboratory-reared Ae. aegypti.Standardised World Health Organisation Pesticide Evaluation Scheme (WHOPES cone tests and arm-in-cage assays were used to assess knockdown (KD and mortality of Ae. aegypti tested against factory-treated fabric, home-dipped fabric and microencapsulated fabric. Based on the testing of these three different treatment types, the most protective was selected for further analysis using arm-in cage assays with the effect of washing, ultra-violet light, and ironing investigated using high pressure liquid chromatography.Efficacy varied between the microencapsulated and factory dipped fabrics in cone testing. Factory-dipped clothing showed the greatest effect on KD (3 min 38.1%; 1 hour 96.5% and mortality (97.1% with no significant difference between this and the factory dipped school uniforms. Factory-dipped clothing was therefore selected for further testing. Factory dipped clothing provided 59% (95% CI = 49.2%- 66.9% reduction in landing and a 100% reduction in biting in arm-in-cage tests. Washing duration and technique had a significant effect, with insecticidal longevity shown to be greater with machine washing (LW50 = 33.4 compared to simulated hand washing (LW50 = 17.6. Ironing significantly reduced permethrin content after 1 week of simulated use, with a 96.7% decrease after 3 months although UV exposure did not reduce permethrin content within clothing significantly after 3 months simulated use.Permethrin-treated clothing may be a promising intervention in reducing dengue transmission. However, our findings also suggest that clothing may provide only short-term protection due to the effect of washing and ironing, highlighting the need for

  10. Permethrin-Treated Clothing as Protection against the Dengue Vector, Aedes aegypti: Extent and Duration of Protection.

    Science.gov (United States)

    DeRaedt Banks, Sarah; Orsborne, James; Gezan, Salvador A; Kaur, Harparkash; Wilder-Smith, Annelies; Lindsey, Steve W; Logan, James G

    2015-01-01

    Dengue transmission by the mosquito vector, Aedes aegypti, occurs indoors and outdoors during the day. Personal protection of individuals, particularly when outside, is challenging. Here we assess the efficacy and durability of different types of insecticide-treated clothing on laboratory-reared Ae. aegypti. Standardised World Health Organisation Pesticide Evaluation Scheme (WHOPES) cone tests and arm-in-cage assays were used to assess knockdown (KD) and mortality of Ae. aegypti tested against factory-treated fabric, home-dipped fabric and microencapsulated fabric. Based on the testing of these three different treatment types, the most protective was selected for further analysis using arm-in cage assays with the effect of washing, ultra-violet light, and ironing investigated using high pressure liquid chromatography. Efficacy varied between the microencapsulated and factory dipped fabrics in cone testing. Factory-dipped clothing showed the greatest effect on KD (3 min 38.1%; 1 hour 96.5%) and mortality (97.1%) with no significant difference between this and the factory dipped school uniforms. Factory-dipped clothing was therefore selected for further testing. Factory dipped clothing provided 59% (95% CI = 49.2%- 66.9%) reduction in landing and a 100% reduction in biting in arm-in-cage tests. Washing duration and technique had a significant effect, with insecticidal longevity shown to be greater with machine washing (LW50 = 33.4) compared to simulated hand washing (LW50 = 17.6). Ironing significantly reduced permethrin content after 1 week of simulated use, with a 96.7% decrease after 3 months although UV exposure did not reduce permethrin content within clothing significantly after 3 months simulated use. Permethrin-treated clothing may be a promising intervention in reducing dengue transmission. However, our findings also suggest that clothing may provide only short-term protection due to the effect of washing and ironing, highlighting the need for improved

  11. Research in intelligent biomedical clothing vs. realities in the European textile business.

    Science.gov (United States)

    Walter, Lutz

    2004-01-01

    In order to make intelligent biomedical clothing a market reality, a critical mass of scientific, technical and industrial capacities from various disciplines and industries must be successfully brought together. The textiles and clothing sector, i.e. the industry that transform natural or man-made fibres into yarns then with a myriad of processing options into complex tissues and finally into clothing, is undoubtedly a crucial element in such development. With Europe disposing of the world's most diverse, productive and innovative textiles and clothing industry, in addition to relevant expertise and resources in other scientific disciplines and industrial sectors, it could play a leading role in the advancement of the concept of intelligent biomedical clothing. In this process, a great number of challenges--firstly scientific and technical in nature--still need to be overcome and support from public funding programmes could constitute the necessary trigger for research and industrial efforts to be seriously undertaken. In view of the great benefits of such new products for the individual consumer, national health care systems and the society as a whole, a concerted effort in private-public partnership seems merited.

  12. The effect of clothing fit and material of women’s Islamic sportswear on physiological and subjective responses during exercise in warm and humid environment

    Directory of Open Access Journals (Sweden)

    Wibowo Astrid Wahyu Adventri

    2018-01-01

    Full Text Available The purpose of this study was to investigate the effects of clothing fit and material of Islamic sportswear for female on physiological responses and body heat balance during exercise in warm and humid environment. Twelve healthy female students (20.3±0.4 years exercised wearing four types of women’s Islamic sportswear comprised of two level of clothing fit: loose-fit and tight-fit, and two types of material for sportswear: cotton and polyester on four separate occasions, and in random order. They performed a 30-min treadmill exercise at an intensity of 70% HRmax and then rested on a chair for 20 min for recovery in a chamber set at an ambient temperature of 34°C and relative humidity of 80%. The results showed that clothing fit did not significantly affect physiological and subjective responses, but clothing material did; sportswear made of cotton resulted in a higher increase of tympanic temperature during exercise and recovery compared to that made of polyester (P<0.05. In addition, sportswear made of cotton have lower conductive and evaporative heat loss than sportswear made of polyester (P<0.05. Clothing fit only had significant effect on conductive heat loss; that is tight-fit sportswear showed greater conductive heat loss than loose-fit one (P <0.05. Regarding subjective responses, participants reported lower thermal comfort, greater thermal sensation, and greater skin wetness sensation when performing exercise wearing tight-fit sportswear made of polyester.

  13. The value of virtual conferencing for ecology and conservation.

    Science.gov (United States)

    Fraser, Hannah; Soanes, Kylie; Jones, Stuart A; Jones, Chris S; Malishev, Matthew

    2017-06-01

    The objectives of conservation science and dissemination of its research create a paradox: Conservation is about preserving the environment, yet scientists spread this message at conferences with heavy carbon footprints. Ecology and conservation science depend on global knowledge exchange-getting the best science to the places it is most needed. However, conference attendance from developed countries typically outweighs that from developing countries that are biodiversity and conservation hotspots. If any branch of science should be trying to maximize participation while minimizing carbon emissions, it is conservation. Virtual conferencing is common in other disciplines, such as education and humanities, but it is surprisingly underused in ecology and conservation. Adopting virtual conferencing entails a number of challenges, including logistics and unified acceptance, which we argue can be overcome through planning and technology. We examined 4 conference models: a pure-virtual model and 3 hybrid hub-and-node models, where hubs stream content to local nodes. These models collectively aim to mitigate the logistical and administrative challenges of global knowledge transfer. Embracing virtual conferencing addresses 2 essential prerequisites of modern conferences: lowering carbon emissions and increasing accessibility for remote, time- and resource-poor researchers, particularly those from developing countries. © 2017 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

  14. 75 FR 7987 - Energy Conservation Standards for Residential Clothes Dryers and Room Air Conditioners: Public...

    Science.gov (United States)

    2010-02-23

    ... Conservation Standards for Residential Clothes Dryers and Room Air Conditioners: Public Meeting and... conservation standards for residential clothes dryers and room air conditioners; the analytical framework..., Mailstop EE-2J, Public Meeting for Residential Clothes Dryers and Room Air Conditioners, EERE-2007-BT-STD...

  15. 24 CFR 3280.708 - Exhaust duct system and provisions for the future installation of a clothes dryer.

    Science.gov (United States)

    2010-04-01

    ...(a)(1) through (5). (c) Provisions for future installation of electric clothes dryers. When wiring is... for the future installation of a clothes dryer. 3280.708 Section 3280.708 Housing and Urban... duct system and provisions for the future installation of a clothes dryer. (a) Clothes dryers. (1) All...

  16. [Research on the virtual water composition and virtual water trade for agriculture in Beijing].

    Science.gov (United States)

    Wang, Hong-rui; Wang, Yan; Wang, Jun-hong; Dong, Yan-yan; Han, Zhao-xing

    2007-12-01

    Based on the irrigation norm of typical district and county, and revised by the isoline map of Chinese crops water demand, the change of crops program was analyzed as well as the agricultural water use and its GDP benefits. Then the virtual water was calculated for years. At last, the input-output method was used to calculate the trade of virtual water in Beijing. As the results, the virtual water for cereal crops has been decreasing in Beijing, from 1.832 x 10(9) m3 in 1990 to 4.283 x 10(8) m3 in 2004. Otherwise the virtual water for technical crops has been increasing, which is from 9.06 x 10(8) m3 in 1990 to 1.492 x 10(9) m3 in 2004. On the whole, the virtual water for crops has been decreasing in Beijing. From the angle of primary products Beijing is a virtual water importing area. Virtual water importing of annual average is 2.37 x 10(8) m3, which is about 5.93% of the total water of Beijing. Virtual water has been an important supplement of local real water of Beijing.

  17. Triggers for virtual customer integration in the development of medical equipment – from a manufacturer and a user perspective

    DEFF Research Database (Denmark)

    Füller, Johann; Faullant, Rita; Matzler, Kurt

    2010-01-01

    that looks at the motivations of customers and managers to engage in virtual product development projects. In this paper we try to identify the triggers for virtual customer integration (VCI) from the manager's as well as from the customer's perspective. Using Ajzen's Theory of Planned Behavior we aim...

  18. Augmented Reality Platforms for Virtual Fitting Rooms

    OpenAIRE

    Ioannis Pachoulakis; Kostas Kapetanakis

    2012-01-01

    Multi-sensor body scanners combined with new algorithms and social media technologies have started a revolutionary shift away from the classic desktop paradigm and into the direction of intuitive, “natural interaction” where people interface with the technological world through hand gestures, speech and body language. This article reviews recent examples of Virtual Fitting Rooms (VFRs) and supporting technologies which facilitate the shopping experience by letting customers to try...

  19. Risks and opportunities of virtual learning: the experience of UOC

    Directory of Open Access Journals (Sweden)

    Adela Ros Híjar

    2001-06-01

    Full Text Available In this article, I have tried to give answers to the question of what the risks and opportunities of virtual learning are. In this sense, the UOC's experience has been of great value to analyse several key issues such as the new ways of accessing quality education, the new ways of participation, the new values of educational processes as well as some of the structural factors on which e-learning is based, but which place its very model in jeopardy. Direct observation of some key processes as well as contact with the main actors (e.g. students, teachers and technicians have provided valuable information about some factors to consider when analysing the social implications of virtual learning.

  20. An Easy-to-Use Airborne LiDAR Data Filtering Method Based on Cloth Simulation

    Directory of Open Access Journals (Sweden)

    Wuming Zhang

    2016-06-01

    Full Text Available Separating point clouds into ground and non-ground measurements is an essential step to generate digital terrain models (DTMs from airborne LiDAR (light detection and ranging data. However, most filtering algorithms need to carefully set up a number of complicated parameters to achieve high accuracy. In this paper, we present a new filtering method which only needs a few easy-to-set integer and Boolean parameters. Within the proposed approach, a LiDAR point cloud is inverted, and then a rigid cloth is used to cover the inverted surface. By analyzing the interactions between the cloth nodes and the corresponding LiDAR points, the locations of the cloth nodes can be determined to generate an approximation of the ground surface. Finally, the ground points can be extracted from the LiDAR point cloud by comparing the original LiDAR points and the generated surface. Benchmark datasets provided by ISPRS (International Society for Photogrammetry and Remote Sensing working Group III/3 are used to validate the proposed filtering method, and the experimental results yield an average total error of 4.58%, which is comparable with most of the state-of-the-art filtering algorithms. The proposed easy-to-use filtering method may help the users without much experience to use LiDAR data and related technology in their own applications more easily.

  1. Meditation experts try Virtual Reality Mindfulness: A pilot study evaluation of the feasibility and acceptability of Virtual Reality to facilitate mindfulness practice in people attending a Mindfulness conference.

    Science.gov (United States)

    Navarro-Haro, María V; López-Del-Hoyo, Yolanda; Campos, Daniel; Linehan, Marsha M; Hoffman, Hunter G; García-Palacios, Azucena; Modrego-Alarcón, Marta; Borao, Luis; García-Campayo, Javier

    2017-01-01

    Regular mindfulness practice benefits people both mentally and physically, but many populations who could benefit do not practice mindfulness. Virtual Reality (VR) is a new technology that helps capture participants' attention and gives users the illusion of "being there" in the 3D computer generated environment, facilitating sense of presence. By limiting distractions from the real world, increasing sense of presence and giving people an interesting place to go to practice mindfulness, Virtual Reality may facilitate mindfulness practice. Traditional Dialectical Behavioral Therapy (DBT®) mindfulness skills training was specifically designed for clinical treatment of people who have trouble focusing attention, however severe patients often show difficulties or lack of motivation to practice mindfulness during the training. The present pilot study explored whether a sample of mindfulness experts would find useful and recommend a new VR Dialectical Behavioral Therapy (DBT®) mindfulness skills training technique and whether they would show any benefit. Forty four participants attending a mindfulness conference put on an Oculus Rift DK2 Virtual Reality helmet and floated down a calm 3D computer generated virtual river while listening to digitized DBT® mindfulness skills training instructions. On subjective questionnaires completed by the participants before and after the VR DBT® mindfulness skills training session, participants reported increases/improvements in state of mindfulness, and reductions in negative emotional states. After VR, participants reported significantly less sadness, anger, and anxiety, and reported being significantly more relaxed. Participants reported a moderate to strong illusion of going inside the 3D computer generated world (i.e., moderate to high "presence" in VR) and showed high acceptance of VR as a technique to practice mindfulness. These results show encouraging preliminary evidence of the feasibility and acceptability of using VR to

  2. Performance study of protective clothing against hot water splashes: from bench scale test to instrumented manikin test.

    Science.gov (United States)

    Lu, Yehu; Song, Guowen; Wang, Faming

    2015-03-01

    Hot liquid hazards existing in work environments are shown to be a considerable risk for industrial workers. In this study, the predicted protection from fabric was assessed by a modified hot liquid splash tester. In these tests, conditions with and without an air spacer were applied. The protective performance of a garment exposed to hot water spray was investigated by a spray manikin evaluation system. Three-dimensional body scanning technique was used to characterize the air gap size between the protective clothing and the manikin skin. The relationship between bench scale test and manikin test was discussed and the regression model was established to predict the overall percentage of skin burn while wearing protective clothing. The results demonstrated strong correlations between bench scale test and manikin test. Based on these studies, the overall performance of protective clothing against hot water spray can be estimated on the basis of the results of the bench scale hot water splashes test and the information of air gap size entrapped in clothing. The findings provide effective guides for the design and material selection while developing high performance protective clothing. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2014.

  3. A Review on Virtual Reality

    OpenAIRE

    Pallavi Halarnkar; Sahil Shah; Harsh Shah; Hardik Shah; Anuj Shah

    2012-01-01

    Virtual Reality is a major asset and aspect of our future. It is the key to experiencing, feeling and touching the past, present and the future. It is the medium of creating our own world, our own customized reality. It could range from creating a video game to having a virtual stroll around the universe, from walking through our own dream house to experiencing a walk on an alien planet. With virtual reality, we can experience the most intimidating and gruelling situations by playing safe and...

  4. CLOTH I NG DES IGN FROM TRAD IT IONAL DES I GNS

    Directory of Open Access Journals (Sweden)

    Filiz ERDEN

    2015-08-01

    Full Text Available Concepts of customs and traditions that maintain culture create differences in dressing styles. Clothing that has great importance in Turkish culture vary from city to city, even district to district. Traditional Turkish clothes reflecting characteristics and life style of Turkish society are the most beautiful heritage coming from past to present. T hese clothes also have a characteristic of document that reveals sense of dress and delicacy of Turkish people. Fabrics that are used for sewing white shirt and embroidered underpants from local female dresses unique to Yenice district of Çanakkale region are weaved from cotton, linen, wool yarns according to the season . Weavings were embroidered . In this study, by getting inspired from traditional weavings and embroideries that face with danger of extinction, up to date clothes have been designed and i t has been aimed to contribute to the revival of our cultural values.

  5. Transient thermal sensation and comfort resulting from adjustment of clothing insulation

    DEFF Research Database (Denmark)

    Goto, Tomonobu; Toftum, Jørn; Fanger, Povl Ole

    2003-01-01

    This study investigated the transient effects on human thermal responses of clothing adjustments. Two different levels of activity were tested, and the temperature was set to result in a warm or cool thermal sensation at each activity level. The subjects (12 females and 12 males) wore identical...... uniforms and were asked to take off or don a part of the uniform after they had adapted to the experimental conditions for more than 20 minutes. The results showed that the thermal sensation votes responded immediately to the adjustment of clothing insulation and reached a new steady-state level within 5...

  6. Prevalence and risk factors of contact dermatitis among clothing manufacturing employees in Beijing

    Science.gov (United States)

    Chen, Yu-Xin; Cheng, Hai-Yan; Li, Lin-Feng

    2017-01-01

    Abstract Little is known about the epidemiology of contact dermatitis (CD) in the Chinese clothing industry. This study aimed to investigate the prevalence and some risk factors of contact dermatitis among clothing manufacturing employees in Beijing. This cross-sectional study was conducted by interview using self-administered questionnaires and skin examination between May and August in 2016. Five-hundred twenty-nine employees who had worked at sewing, ironing, and as managers at 12 clothing manufacturing factories were studied. The overall 1-year prevalence of CD among the clothing employees was 28.5% (151/529 employees), with significantly higher prevalence among ironing workers (50%) and sewers (31.7%) compared with managers (12.7%; P garment materials (leather and feather), dry skin, allergic rhinitis, age, and smoking. Among employees in Chinese clothing industry, sewers and ironing workers had a higher 1-year prevalence of CD than managers. It is noteworthy that exposure to leather and feather materials and the types of manual work are associated with CD, as well as dry skin and allergic rhinitis. PMID:28328819

  7. VIRTUAL CURRENCY "BITCOIN" – CHALLENGES AND CONTROVERSIES

    Directory of Open Access Journals (Sweden)

    ȘOAVĂ GEORGETA

    2016-06-01

    Full Text Available In the knowledge society, when there is a rapidly evolving information technology, the virtual markets, namely the online transactions, have created the premises emergence and development of new technologies of using of finances, namely virtual coin (Bitcoin. Use of this coin appears as an alternative to traditional currencies, but they are not under the control of no body, are devoid of inflation and maintain the anonymity of users. Following the evolution of this new type of coin, we proposed in this paper to present some general aspects of this coin focusing on global controversies on using Bitcoin. We have reviewed several myths that have arisen with the development and penetration of its on market and because it is a volatile coin can generate huge gains but and huge losses, we have studied fluctuation and implications for users and investors and the attraction of the drug dealers and criminals for using virtual currency, Bitcoin. At the end of the paper, based on the analysis we have tried to outline the future of this modern payment system. Thus, we found that lately, in that its value has fluctuated strongly, and increased buyer confidence, but appeared and increased cyber attacks, and the fear that if the state has no a role in protecting citizens from fraud, we can assist at the development of financial schemes extremely dangerous. The financial experts believe that if the world banks would jointly solve all the problems, the virtual money will have a real chance of life.

  8. Fear no colors? Observer clothing color influences lizard escape behavior

    Science.gov (United States)

    Drury, Jonathan P.; Blumstein, Daniel T.; Pauly, Gregory B.

    2017-01-01

    Animals often view humans as predators, leading to alterations in their behavior. Even nuanced aspects of human activity like clothing color affect animal behavior, but we lack an understanding of when and where such effects will occur. The species confidence hypothesis posits that birds are attracted to colors found on their bodies and repelled by non-body colors. Here, we extend this hypothesis taxonomically and conceptually to test whether this pattern is applicable in a non-avian reptile and to suggest that species should respond less fearfully to their sexually-selected signaling color. Responses to clothing color could also be impacted by habituation to humans, so we examine whether behavior varied between areas with low and high human activity. We quantified the effects of four T-shirt colors on flight initiation distances (FID) and on the ease of capture in western fence lizards (Sceloporus occidentalis), and we accounted for detectability against the background environment. We found no differences in lizard behavior between sites. However, lizards tolerated the closest approaches and were most likely to be captured when approached with the T-shirt that resembled their sexually-selected signaling color. Because changes in individual behavior affect fitness, choice of clothing color by people, including tourists, hikers, and researchers, could impact wildlife populations and research outcomes. PMID:28792983

  9. Fear no colors? Observer clothing color influences lizard escape behavior.

    Directory of Open Access Journals (Sweden)

    Breanna J Putman

    Full Text Available Animals often view humans as predators, leading to alterations in their behavior. Even nuanced aspects of human activity like clothing color affect animal behavior, but we lack an understanding of when and where such effects will occur. The species confidence hypothesis posits that birds are attracted to colors found on their bodies and repelled by non-body colors. Here, we extend this hypothesis taxonomically and conceptually to test whether this pattern is applicable in a non-avian reptile and to suggest that species should respond less fearfully to their sexually-selected signaling color. Responses to clothing color could also be impacted by habituation to humans, so we examine whether behavior varied between areas with low and high human activity. We quantified the effects of four T-shirt colors on flight initiation distances (FID and on the ease of capture in western fence lizards (Sceloporus occidentalis, and we accounted for detectability against the background environment. We found no differences in lizard behavior between sites. However, lizards tolerated the closest approaches and were most likely to be captured when approached with the T-shirt that resembled their sexually-selected signaling color. Because changes in individual behavior affect fitness, choice of clothing color by people, including tourists, hikers, and researchers, could impact wildlife populations and research outcomes.

  10. Framework and implications of virtual neurorobotics

    Directory of Open Access Journals (Sweden)

    2008-07-01

    Full Text Available Despite decades of societal investment in artificial learning systems, truly “intelligent” systems have yet to be realized. These traditional models are based on input-output pattern optimization and/or cognitive production rule modeling. One response has been social robotics, using the interaction of human and robot to capture important cognitive dynamics such as cooperation and emotion; to date, these systems still incorporate traditional learning algorithms. More recently, investigators are focusing on the core assumptions of the brain “algorithm” itself—trying to replicate uniquely “neuromorphic” dynamics such as action potential spiking and synaptic learning. Only now are large-scale neuromorphic models becoming feasible, due to the availability of powerful supercomputers and an expanding supply of parameters derived from research into the brain’s interdependent electrophysiological, metabolomic and genomic networks. Personal computer technology has also led to the acceptance of computer-generated humanoid images, or “avatars”, to represent intelligent actors in virtual realities. In a recent paper, we proposed a method of virtual neurorobotics (VNR in which the approaches above (social-emotional robotics, neuromorphic brain architectures, and virtual reality projection are hybridized to rapidly forward-engineer and develop increasingly complex, intrinsically intelligent systems. In this paper, we synthesize our research and related work in the field and provide a framework for VNR, with wider implications for research and practical applications.

  11. Evaluation of two recommended disinfection methods for cleaning cloths used in food services of southern Brazil

    Directory of Open Access Journals (Sweden)

    Sabrina Bartz

    2013-09-01

    Full Text Available In the State of Rio Grande do Sul (RS, Southern Brazil, a good manufacturing practices regulation was published recommending two disinfection methods for cleaning cloths used in food services. The aim of the present study was to evaluate the efficacy of those methods. Cleaning cloths were sampled without prior notice at food services, on common working days. For the analyses, the cloths were divided in two sub-samples, being one of them microbiologically analyzed. The second sub-sample was further divided in two pieces and submitted to hand washing for two minutes. After that, one piece was boiled in water for 15 min and the other one was soaked in a 200 ppm sodium hypochlorite solution for 15 min. Both pieces of cloth were submitted to microbiological analyses. Cleaning cloths presented total aerobic mean counts of 6.9 ± 6.7 log/cm². All cleaning cloths presented coliform contamination, and 40% demonstrated mean counts of 6.2 ± 5.6 log/cm². Presumptive S. aureus mean counts of 5.5 ± 4.9 log/cm² were found. No statistic correlation was observed among the number of meals served daily in the food services and the microbiological contamination levels. After washing and disinfection, microbiological counts were significantly (p < 0.05 reduced by both methods, achieving an approximately 5 log reduction. The reductions achieved by the sodium hypochlorite soaking method and the boiling method were not significantly different. Thus, it was possible to conclude that both recommended methods were suitable to disinfect cleaning cloths used in food services.

  12. Application of biomass-derived flexible carbon cloth coated with MnO2 nanosheets in supercapacitors

    Science.gov (United States)

    He, Shuijian; Chen, Wei

    2015-10-01

    Successful application of inexpensive energy storage devices lies in the exploitation of fabrication approaches that are based on cost-efficient materials and that can be easily scaled up. Here, inexpensive textile weaved by natural flax fiber is selected as raw material in preparing flexible and binder-free electrode material for supercapacitors. Although carbon fiber cloth obtained from the direct carbonization of flax textile exhibits a low specific capacitance of 0.78 F g-1, carbon fiber cloth electrode shows a very short relaxation time of 39.1 m s and good stability with almost 100% capacitance retaining after 104 cycles at 5 A g-1. To extend the application of the resulting carbon cloth in supercapacitor field, a layer of MnO2 nanosheets is deposited on the surface of carbon fiber via in situ redox reaction between carbon and KMnO4. The specific capacitance of MnO2 reaches 683.73 F g-1 at 2 A g-1 and still retains 269.04 F g-1 at 300 A g-1, indicating the excellent rate capacitance performance of the carbon cloth/MnO2 hybrids. The present study shows that carbon cloth derived from flax textile can provide a low-cost material platform for the facile, cost-efficient and large scale fabrication of binder-free electrode materials for energy storage devices.

  13. 75 FR 5578 - Submission for OMB Review; Comment Request-Flammability Standards for Clothing Textiles and Vinyl...

    Science.gov (United States)

    2010-02-03

    ... Standards for Clothing Textiles and Vinyl Plastic Film AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: Pursuant to the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the Consumer... Commission's flammability standards for clothing textiles and vinyl plastic film. DATES: Written comments on...

  14. The development of anti-heat stress clothing for construction workers in hot and humid weather.

    Science.gov (United States)

    Chan, Albert P C; Guo, Y P; Wong, Francis K W; Li, Y; Sun, S; Han, X

    2016-04-01

    The purpose of this study was to develop anti-heat stress clothing for construction workers in hot and humid weather. Following DeJonge's functional clothing design process, the design situation was explored, including clothing fabric heat/moisture transporting properties and UV protection and the aspects of clothing ergonomic design (mobility, convenience, and safety). The problem structure was derived from the results of the surveys in three local construction sites, which agreed well with the task requirements and observations. Specifications were consequently described and 30 commercially available fabrics were identified and tested. Fabric testing data and design considerations were inputted in S-smart system to predict the thermal functional performance of the clothing. A new uniform prototype was developed and evaluated. The results of all measurements suggest that the new uniform which incorporated fabrics with superior heat/moisture transporting properties and loose-fitting design could reduce the workers' heat stress and improve their comfort and work performance. Practitioner Summary: The construction workers' uniform currently used in Hong Kong during summer was unsatisfactory. Following DeJonge's functional clothing design process, an anti-heat stress uniform was developed by testing 30 fabrics and predicting clothing thermal functional performance using S-smart system. The new uniform could reduce the workers' heat stress and improve their comfort and work performance.

  15. Tri-generation nation

    International Nuclear Information System (INIS)

    Pichon, Max

    2010-01-01

    Full text: Sydney and Melbourne councils are looking to outperform each other with ambitious greenhouse and energy efficiency initiatives. Sydney wants to cut CO_2 by 70 per cent by 2030, while Melbourne's 1200 Buildings retrofit project speaks for itself. One key technology both councils are tapping is trigeneration, which generates electricity, heating and cooling from local gas-fired power units. From a physics perspective, a combustion process cannot be more than 30 per cent efficient, so capturing and using the waste heat can lead to great savings. Sydney Lord Mayor Clover Moore said a third of the council's carbon reduction goal of 3.9Mt a year by 2030 will come from tri-gen. Melbourne is aiming to achieve zero net emissions by 2020, which means eliminating 5.8Mt of CO_2, a lot of it through tri-gen. It has already seen a surge among landlords. GPT, Stockland and Mirvac have all stuck tri-gen units in Sydney office developments, while newly carbon- neutral NAB has installed the technology on its data centre in Melbourne and expects to save 20,000 tonnes of CO_2 a year. But one expert, while welcoming the spike in popularity, says there are traps for the unwary. Johnson Controls' Peter Moser sees two core drivers for its uptake. “First is the prominence of GreenStar and NABERS. Many companies will move to tri-gen as they will want the extra points or stars,” he told WME. “Secondly, there is the continuous increase in the price of energy. At the same time there may be an [emissions trading scheme] or a carbon price introduced, and that puts pressure on the consumer. Combining those two scenarios will see more people adopt tri-gen because it will become more economically viable and the payback periods of tri-gen will come down considerably.” But he points to the importance of pre-planning when considering tri-gen, warning. “To put tri-gen into a building, let alone retrofit a whole city and make it work, you need highly complex teams working together

  16. A distributed parallel genetic algorithm of placement strategy for virtual machines deployment on cloud platform.

    Science.gov (United States)

    Dong, Yu-Shuang; Xu, Gao-Chao; Fu, Xiao-Dong

    2014-01-01

    The cloud platform provides various services to users. More and more cloud centers provide infrastructure as the main way of operating. To improve the utilization rate of the cloud center and to decrease the operating cost, the cloud center provides services according to requirements of users by sharding the resources with virtualization. Considering both QoS for users and cost saving for cloud computing providers, we try to maximize performance and minimize energy cost as well. In this paper, we propose a distributed parallel genetic algorithm (DPGA) of placement strategy for virtual machines deployment on cloud platform. It executes the genetic algorithm parallelly and distributedly on several selected physical hosts in the first stage. Then it continues to execute the genetic algorithm of the second stage with solutions obtained from the first stage as the initial population. The solution calculated by the genetic algorithm of the second stage is the optimal one of the proposed approach. The experimental results show that the proposed placement strategy of VM deployment can ensure QoS for users and it is more effective and more energy efficient than other placement strategies on the cloud platform.

  17. A Distributed Parallel Genetic Algorithm of Placement Strategy for Virtual Machines Deployment on Cloud Platform

    Directory of Open Access Journals (Sweden)

    Yu-Shuang Dong

    2014-01-01

    Full Text Available The cloud platform provides various services to users. More and more cloud centers provide infrastructure as the main way of operating. To improve the utilization rate of the cloud center and to decrease the operating cost, the cloud center provides services according to requirements of users by sharding the resources with virtualization. Considering both QoS for users and cost saving for cloud computing providers, we try to maximize performance and minimize energy cost as well. In this paper, we propose a distributed parallel genetic algorithm (DPGA of placement strategy for virtual machines deployment on cloud platform. It executes the genetic algorithm parallelly and distributedly on several selected physical hosts in the first stage. Then it continues to execute the genetic algorithm of the second stage with solutions obtained from the first stage as the initial population. The solution calculated by the genetic algorithm of the second stage is the optimal one of the proposed approach. The experimental results show that the proposed placement strategy of VM deployment can ensure QoS for users and it is more effective and more energy efficient than other placement strategies on the cloud platform.

  18. THE ROMANIAN CLOTHING MARKET

    OpenAIRE

    MARIUS BOTA

    2009-01-01

    Today, more than ever, the business environment is continually changing. Competition intensifies in almost every industry, so companies must develop innovative products and business processes to survive. The Romanian clothing market is a crowded one with a lot of powerful competitors, especially Asian firms with their cheep products. Companies are today aware that they must offer the right product, in the right place, at the right price and at the right moment of time in order to be competiti...

  19. Virtual Laboratory in the Role of Dynamic Visualisation for Better Understanding of Chemistry in Primary School

    Science.gov (United States)

    Herga, Nataša Rizman; Cagran, Branka; Dinevski, Dejan

    2016-01-01

    Understanding chemistry includes the ability to think on three levels: the macroscopic level, the symbolic level, and the level of particles--sub-microscopic level. Pupils have the most difficulty when trying to understand the sub-microscopic level because it is outside their range of experience. A virtual laboratory enables a simultaneous…

  20. Blackout cloth for dormancy induction

    Science.gov (United States)

    Tom Jopson

    2007-01-01

    The use of blackout cloth to create long night photoperiods for the induction of dormancy in certain conifer species has been an established practice for a long time. Its use was suggested by Tinus and McDonald (1979) as an effective technique, and the practice has been commonly used in Canadian forest nurseries for a number of years. Cal-Forest Nursery installed its...

  1. Exploring Clothing as a Barrier to Workplace Participation Faced by People Living with Disabilities

    OpenAIRE

    Kerri McBee-Black; Jung Ha-Brookshire

    2018-01-01

    In response to research which argues that people living with a disability (PLWD) face societal barriers including workplace participation, this study explored how the barriers to social participation, specifically workplace participation, faced by PLWD are exacerbated by the lack of appropriate clothing and the role that stigma, self-efficacy, and clothing have in workplace participation. Finding appropriate clothing is a significant barrier to social participation for many PLWD. The social m...

  2. Which technology to investigate visual perception in sport: video vs. virtual reality.

    Science.gov (United States)

    Vignais, Nicolas; Kulpa, Richard; Brault, Sébastien; Presse, Damien; Bideau, Benoit

    2015-02-01

    Visual information uptake is a fundamental element of sports involving interceptive tasks. Several methodologies, like video and methods based on virtual environments, are currently employed to analyze visual perception during sport situations. Both techniques have advantages and drawbacks. The goal of this study is to determine which of these technologies may be preferentially used to analyze visual information uptake during a sport situation. To this aim, we compared a handball goalkeeper's performance using two standardized methodologies: video clip and virtual environment. We examined this performance for two response tasks: an uncoupled task (goalkeepers show where the ball ends) and a coupled task (goalkeepers try to intercept the virtual ball). Variables investigated in this study were percentage of correct zones, percentage of correct responses, radial error and response time. The results showed that handball goalkeepers were more effective, more accurate and started to intercept earlier when facing a virtual handball thrower than when facing the video clip. These findings suggested that the analysis of visual information uptake for handball goalkeepers was better performed by using a 'virtual reality'-based methodology. Technical and methodological aspects of these findings are discussed further. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Virtual Cultural Landscape Laboratory Based on Internet GIS Technology

    Science.gov (United States)

    Bill, R.

    2012-07-01

    In recent years the transfer of old documents (books, paintings, maps etc.) from analogue to digital form has gained enormous importance. Numerous interventions are concentrated in the digitalisation of library collections, but also commercial companies like Microsoft or Google try to convert large analogue stocks such as books, paintings, etc. in digital form. Data in digital form can be much easier made accessible to a large user community, especially to the interested scientific community. The aim of the described research project is to set up a virtual research environment for interdisciplinary research focusing on the landscape of the historical Mecklenburg in the north-east of Germany. Georeferenced old maps from 1786 and 1890 covering complete Mecklenburg should be combined with current geo-information, satellite and aerial imagery to support spatio-temporal research aspects in different scales in space (regional 1:200,000 to local 1:25.000) and time (nearly 250 years in three time steps, the last 30 years also in three time slices). The Virtual Laboratory for Cultural Landscape Research (VKLandLab) is designed and developed by the Chair of Geodesy and Geoinformatics, hosted at the Computing Centre (ITMZ) and linked to the Digital Library (UB) at Rostock University. VKLandLab includes new developments such as wikis, blogs, data tagging, etc. and proven components already integrated in various data-related infrastructures such as InternetGIS, data repositories and authentication structures. The focus is to build a data-related infrastructure and a work platform that supports students as well as researchers from different disciplines in their research in space and time.

  4. Heat strain in protective clothing - challenges and intervention strategies

    NARCIS (Netherlands)

    McLellan, T.M.; Daanen, H.A.M.; Kiekens, P.; Jayaraman, S.

    2012-01-01

    Humans rely on sweat evaporation during exercise in the heat to promote cooling and to maintain thermal homeostasis. In protective clothing, however, sweat evaporation is severely hampered and this may lead to uncompensable heat strain, where core body temperature continues to rise leading to

  5. Human exposure to trace elements through the skin by direct contact with clothing: Risk assessment

    International Nuclear Information System (INIS)

    Rovira, Joaquim; Nadal, Martí; Schuhmacher, Marta; Domingo, José L.

    2015-01-01

    Metals in textile products and clothing are used for many purposes, such as metal complex dyes, pigments, mordant, catalyst in synthetic fabrics manufacture, synergists of flame retardants, antimicrobials, or as water repellents and odour-preventive agents. When present in textile materials, heavy metals may mean a potential danger to human health. In the present study, the concentrations of a number of elements (Al, As, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sm, Sn, Sr, Tl, V, and Zn) were determined in skin-contact clothes. Analysed clothes were made of different materials, colours, and brands. Interestingly, we found high levels of Cr in polyamide dark clothes (605 mg/kg), high Sb concentrations in polyester clothes (141 mg/kg), and great Cu levels in some green cotton fabrics (around 280 mg/kg). Dermal contact exposure and human health risks for adult males, adult females, and for <1-year-old children were assessed. Non-carcinogenic and carcinogenic risks were below safe (HQ<1) and acceptable (<10 −6 ) limits, respectively, according to international standards. However, for Sb, non-carcinogenic risk was above 10% of the safety limit (HQ>0.1) for dermal contact with clothes. - Highlights: • We determined in skin-contact clothes the concentrations of a number of metals. • Dermal contact exposure and health risks for adults and for 1-year-old children were assessed. • Carcinogenic risks were considered as acceptable (<10 −6 ). • For non-carcinogenic risks, only Sb exceeded a 10% of the HQ for dermal contact with clothes

  6. Maintenance of influenza virus infectivity on the surfaces of personal protective equipment and clothing used in healthcare settings.

    Science.gov (United States)

    Sakaguchi, Hiroko; Wada, Koji; Kajioka, Jitsuo; Watanabe, Mayumi; Nakano, Ryuichi; Hirose, Tatsuko; Ohta, Hiroshi; Aizawa, Yoshiharu

    2010-11-01

    The maintenance of infectivity of influenza viruses on the surfaces of personal protective equipment and clothing is an important factor in terms of controlling viral cross-infection in the environment and preventing contact infection. The aim of this study was to determine if laboratory-grown influenza A (H1N1) virus maintained infectivity on the surfaces of personal protective equipment and clothing used in healthcare settings. Influenza A virus (0.5 mL) was deposited on the surface of a rubber glove, an N95 particulate respirator, a surgical mask made of non-woven fabric, a gown made of Dupont Tyvek, a coated wooden desk, and stainless steel. Each sample was left for 1, 8, and 24 h, and hemagglutination (HA) and 50% tissue culture infective dose (TCID(50))/mL were measured. The HA titer of this influenza A virus did not decrease in any of the materials tested even after 24 h. The infectivity of influenza A virus measured by TCID(50) was maintained for 8 h on the surface of all materials, with the exception of the rubber glove for which virus infectivity was maintained for 24 h. Our results indicate that the replacement/renewal of personal protective equipment and clothing by healthcare professionals in cases of exposure to secretions and droplets containing viruses spread by patients is an appropriate procedure to prevent cross-infection.

  7. Impact of Different Personal Protective Clothing on Wildland Firefighters' Physiological Strain.

    Science.gov (United States)

    Carballo-Leyenda, Belén; Villa, José G; López-Satué, Jorge; Rodríguez-Marroyo, Jose A

    2017-01-01

    Wildfire firefighting is an extremely demanding occupation performed under hot environment. The use of personal protective clothing (PPC) is needed to protect subjects from the thermal exposure. However, the additional use of PPC may increase the wildland firefighters' physiological strain, and consequently limit their performance. The aim of this study was to analyze the effect of four different PPC on the physiological strain of wildland firefighters under moderate conditions (30°C and 30% RH). Eight active and healthy wildland firefighters performed a submaximal walking test wearing a traditional short sports gear and 4 different PPC. The materials combination (viscose, Nomex, Kevlar, P-140 and fire resistant cotton) used during the PPC manufacturing process was different. During all tests, to simulate a real scenario subjects wore a backpack pump (20 kg). Heart rate, respiratory gas exchange, gastrointestinal temperature, blood lactate concentration, perceived exertion and temperature and humidity underneath the PPC were recorded throughout tests. Additionally, parameters of heat balance were estimated. Wearing a PPC did not cause a significant increase in the subjects' physiological response. The gastrointestinal temperature increment, the relative humidity of the microclimate underneath the PPC, the sweat residue in PPC, the sweat efficiency, the dry heat exchange and the total clothing insulation were significantly affected according to the PPC fabric composition. These results suggest that the PPC composition affect the moisture management. This might be taken into account to increase the wildland firefighters' protection in real situations, when they have to work close to the flames.

  8. Impact of Different Personal Protective Clothing on Wildland Firefighters' Physiological Strain

    Directory of Open Access Journals (Sweden)

    Belén Carballo-Leyenda

    2017-08-01

    Full Text Available Wildfire firefighting is an extremely demanding occupation performed under hot environment. The use of personal protective clothing (PPC is needed to protect subjects from the thermal exposure. However, the additional use of PPC may increase the wildland firefighters' physiological strain, and consequently limit their performance. The aim of this study was to analyze the effect of four different PPC on the physiological strain of wildland firefighters under moderate conditions (30°C and 30% RH. Eight active and healthy wildland firefighters performed a submaximal walking test wearing a traditional short sports gear and 4 different PPC. The materials combination (viscose, Nomex, Kevlar, P-140 and fire resistant cotton used during the PPC manufacturing process was different. During all tests, to simulate a real scenario subjects wore a backpack pump (20 kg. Heart rate, respiratory gas exchange, gastrointestinal temperature, blood lactate concentration, perceived exertion and temperature and humidity underneath the PPC were recorded throughout tests. Additionally, parameters of heat balance were estimated. Wearing a PPC did not cause a significant increase in the subjects' physiological response. The gastrointestinal temperature increment, the relative humidity of the microclimate underneath the PPC, the sweat residue in PPC, the sweat efficiency, the dry heat exchange and the total clothing insulation were significantly affected according to the PPC fabric composition. These results suggest that the PPC composition affect the moisture management. This might be taken into account to increase the wildland firefighters' protection in real situations, when they have to work close to the flames.

  9. Motorcycle protective clothing: protection from injury or just the weather?

    Science.gov (United States)

    de Rome, Liz; Ivers, Rebecca; Fitzharris, Michael; Du, Wei; Haworth, Narelle; Heritier, Stephane; Richardson, Drew

    2011-11-01

    Apart from helmets, little is known about the effectiveness of motorcycle protective clothing in reducing injuries in crashes. The study aimed to quantify the association between usage of motorcycle clothing and injury in crashes. Cross-sectional analytic study. Crashed motorcyclists (n=212, 71% of identified eligible cases) were recruited through hospitals and motorcycle repair services. Data was obtained through structured face-to-face interviews. The main outcome was hospitalization and motorcycle crash-related injury. Poisson regression was used to estimate relative risk (RR) and 95% confidence intervals for injury adjusting for potential confounders. Motorcyclists were significantly less likely to be admitted to hospital if they crashed wearing motorcycle jackets (RR=0.79, 95% CI: 0.69-0.91), pants (RR=0.49, 95% CI: 0.25-0.94), or gloves (RR=0.41, 95% CI: 0.26-0.66). When garments included fitted body armour there was a significantly reduced risk of injury to the upper body (RR=0.77, 95% CI: 0.66-0.89), hands and wrists (RR=0.55, 95% CI: 0.38-0.81), legs (RR=0.60, 95% CI: 0.40-0.90), feet and ankles (RR=0.54, 95% CI: 0.35-0.83). Non-motorcycle boots were also associated with a reduced risk of injury compared to shoes or joggers (RR=0.46, 95% CI: 0.28-0.75). No association between use of body armour and risk of fracture injuries was detected. A substantial proportion of motorcycle designed gloves (25.7%), jackets (29.7%) and pants (28.1%) were assessed to have failed due to material damage in the crash. Motorcycle protective clothing is associated with reduced risk and severity of crash related injury and hospitalization, particularly when fitted with body armour. The proportion of clothing items that failed under crash conditions indicates a need for improved quality control. While mandating usage of protective clothing is not recommended, consideration could be given to providing incentives for usage of protective clothing, such as tax exemptions for safety

  10. ASSEMBLY LINE BALANCING in a CLOTHING COMPANY

    Directory of Open Access Journals (Sweden)

    HASNALCACI Kubra

    2017-05-01

    Full Text Available Assembly lines take the attention of researchers and companies because of its great effect on efficiency. Efficiency in assembly lines has an important role on cost and quality which are the basic fundamentals of competition. Assembly lines contain a number of workstations and tasks (jobs are processed in these stations and are moved from station to station. The tasks are assigned to each station regarding a cycle time. The cycle time is the maximum available time for the production of a job at any workstation. The assingning of jobs to workstations is based on the objective of minimizing the workflow among the workstations, reducing the throughput time as well as the work in progress and thus increasing productivity. If the jobs are not allocated in balance, this will cause idle workstations and waste of workforce besides the loss of overall efficiency. In this study, an assebly line balancing problem was examined for a five pocket denim trousers in a clothing company. Firstly, priority associations and standard durations of operations of denim trousers were determined. Then, assembly line balancing study was carried out by using ranked positional weights assembly line balancing method developed by Helgeson and Birnie to increase the production in a clothing company manufacturing five pocket denim trousers.

  11. Grafting of activated carbon cloths for selective adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Gineys, M.; Benoit, R.; Cohaut, N.; Béguin, F.; Delpeux-Ouldriane, S., E-mail: delpeux@cnrs-orleans.fr

    2016-05-01

    Graphical abstract: - Highlights: • A controlled grafting of carboxylic functions on activated carbon fibers. • The carbon material nanotextural properties preservation after grafting. • An identification of the grafting mechanism through ToF SIMS analysis. • A chemical mapping of the grafted surface using ToF SIMS technique and imaging. - Abstract: Chemical functionalization of an activated carbon cloth with 3-aminophthalic acid and 4-aminobenzoic acid groups by the in situ formation of the corresponding diazonium salt in aqueous acidic solution is reported. The nature and amount of selected functions on an activated carbon surface, in particular the grafted density, were determined by potentiometric titration, elemental analysis and X-ray photoelectron spectroscopy (XPS). The nanotextural properties of the modified carbon were explored by gas adsorption. Functionalized activated carbon cloth was obtained at a discrete grafting level while preserving interesting textural properties and a large porous volume. Finally, the grafting homogeneity of the carbon surface and the nature of the chemical bonding were investigated using Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) technique.

  12. Cultural identity, clothing and common mental disorder: a prospective school-based study of white British and Bangladeshi adolescents.

    Science.gov (United States)

    Bhui, K; Khatib, Y; Viner, R; Klineberg, E; Clark, C; Head, J; Stansfeld, S

    2008-05-01

    Cultural integration is the healthiest outcome for young people living in multicultural societies. This paper investigates the influence of different cultural identities on the risk of common mental disorders among Bangladeshi and white British pupils. The cultural identity of 11-14-year-old school pupils was assessed by their preferences for friends and clothes of their own or other cultural groups; using this information pupils were classified into traditional, integrated, assimilated or marginalised groups. We undertook prospective analyses of cultural identity and its impacts on the later mental health of young people. East London. In 2001, white British (573) and Bangladeshi (682) school pupils from a representative sample of schools completed a self-report questionnaire that assessed their cultural, social and health characteristics. In 2003, 383 white British and 517 Bangladeshi pupils were resurveyed and completed measures of mental health. Strengths and difficulties questionnaire. Bangladeshi pupils preferring clothes from their own cultural group (traditional clothing) were less likely to have later mental health problems when compared with Bangladeshi pupils showing an equal preference for clothing from their own and other cultures (integrated clothing; odds ratio (OR) 0.3, 95% CI 0.1 to 0.9). In gender-specific analyses, this finding was sustained only among Bangladeshi girls (OR 0.1, 95% CI 0.1 to 0.7). Integrated clothing choices were least risky only for white British adolescents. Friendship choices showed no prospective associations with later mental health problems. Cultural identity, expressed by clothing preferences, influences mental health; the effects differ by gender and ethnic group.

  13. Military Psychology. Volume 9, Number 4, 1997. Effects of Chemical Protective Clothing on Military Performance

    Science.gov (United States)

    1997-01-01

    Hoarding or stealing chemical protective Rationalization (finding reasons not to train in equipment chemical protective clothing) Hypochondriasis ...overreactions involves development of bodily com- plaints, that is, somatization , which result in dramatic increases in reports for sick call or visits to the...doctor (The Adjutant General, 1979; Weisaeth, 1993). This hypochondriasis occurs as people focus attention on their bodies and internal sensations

  14. Clothing for Sports: Part 2: Stridalongapos Loses Shorts, Wins in Style

    Science.gov (United States)

    Schamberger, Wolf

    1985-01-01

    The choice of clothing for sports must take into account the climate, movement, ability to enhance athletic performance, safety and comfort. Part 2 of this two-part article describes the clothing needed for running, cycling, skiing, windsurfing, triathlon, aerobic dancing and hot air ballooning. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10 PMID:21274232

  15. Transient thermal-mechanical behavior of cracked glass-cloth-reinforced epoxy laminates at low temperatures

    International Nuclear Information System (INIS)

    Shindo, Y.; Ueda, S.

    1997-01-01

    We consider the transient thermal-mechanical response of cracked G-10CR glass-cloth-reinforced epoxy laminates with temperature-dependent properties. The glass-cloth-reinforced epoxy laminates are suddenly cooled on the surfaces. A generalized plane strain finite element model is used to study the influence of warp angle and crack formation on the thermal shock behavior of two-layer woven laminates at low temperatures. Numerical calculations are carried out, and the transient temperature distribution and the thermal-mechanical stresses are shown graphically

  16. The Training Requirements of the Clothing Industry. A Survey of Selected Occupations.

    Science.gov (United States)

    Berry, Kathleen M.; Kuhl, Dean H.

    This survey was conducted in order to determine the training requirements of the clothing industry in South Australia. The results and findings are intended to be used as a means for upgrading and revising the Clothing Production Certificate Course and for providing suitable training programs for other key occupations within the industry. Survey…

  17. Single-use surgical clothing system for reduction of airborne bacteria in the operating room.

    Science.gov (United States)

    Tammelin, A; Ljungqvist, B; Reinmüller, B

    2013-07-01

    It is desirable to maintain a low bacterial count in the operating room air to prevent surgical site infection. This can be achieved by ventilation or by all staff in the operating room wearing clothes made from low-permeable material (i.e. clean air suits). We investigated whether there was a difference in protective efficacy between a single-use clothing system made of polypropylene and a reusable clothing system made of a mixed material (cotton/polyester) by testing both in a dispersal chamber and during surgical procedures. Counts of colony-forming units (cfu)/m(3) air were significantly lower when using the single-use clothing system in both settings. Copyright © 2013 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  18. Meditation experts try Virtual Reality Mindfulness: A pilot study evaluation of the feasibility and acceptability of Virtual Reality to facilitate mindfulness practice in people attending a Mindfulness conference.

    Science.gov (United States)

    Navarro-Haro, María V.; López-del-Hoyo, Yolanda; Campos, Daniel; Linehan, Marsha M.; Hoffman, Hunter G.; García-Palacios, Azucena; Modrego-Alarcón, Marta; Borao, Luis; García-Campayo, Javier

    2017-01-01

    Regular mindfulness practice benefits people both mentally and physically, but many populations who could benefit do not practice mindfulness. Virtual Reality (VR) is a new technology that helps capture participants’ attention and gives users the illusion of “being there” in the 3D computer generated environment, facilitating sense of presence. By limiting distractions from the real world, increasing sense of presence and giving people an interesting place to go to practice mindfulness, Virtual Reality may facilitate mindfulness practice. Traditional Dialectical Behavioral Therapy (DBT®) mindfulness skills training was specifically designed for clinical treatment of people who have trouble focusing attention, however severe patients often show difficulties or lack of motivation to practice mindfulness during the training. The present pilot study explored whether a sample of mindfulness experts would find useful and recommend a new VR Dialectical Behavioral Therapy (DBT®) mindfulness skills training technique and whether they would show any benefit. Forty four participants attending a mindfulness conference put on an Oculus Rift DK2 Virtual Reality helmet and floated down a calm 3D computer generated virtual river while listening to digitized DBT® mindfulness skills training instructions. On subjective questionnaires completed by the participants before and after the VR DBT® mindfulness skills training session, participants reported increases/improvements in state of mindfulness, and reductions in negative emotional states. After VR, participants reported significantly less sadness, anger, and anxiety, and reported being significantly more relaxed. Participants reported a moderate to strong illusion of going inside the 3D computer generated world (i.e., moderate to high “presence” in VR) and showed high acceptance of VR as a technique to practice mindfulness. These results show encouraging preliminary evidence of the feasibility and acceptability of

  19. Meditation experts try Virtual Reality Mindfulness: A pilot study evaluation of the feasibility and acceptability of Virtual Reality to facilitate mindfulness practice in people attending a Mindfulness conference.

    Directory of Open Access Journals (Sweden)

    María V Navarro-Haro

    Full Text Available Regular mindfulness practice benefits people both mentally and physically, but many populations who could benefit do not practice mindfulness. Virtual Reality (VR is a new technology that helps capture participants' attention and gives users the illusion of "being there" in the 3D computer generated environment, facilitating sense of presence. By limiting distractions from the real world, increasing sense of presence and giving people an interesting place to go to practice mindfulness, Virtual Reality may facilitate mindfulness practice. Traditional Dialectical Behavioral Therapy (DBT® mindfulness skills training was specifically designed for clinical treatment of people who have trouble focusing attention, however severe patients often show difficulties or lack of motivation to practice mindfulness during the training. The present pilot study explored whether a sample of mindfulness experts would find useful and recommend a new VR Dialectical Behavioral Therapy (DBT® mindfulness skills training technique and whether they would show any benefit. Forty four participants attending a mindfulness conference put on an Oculus Rift DK2 Virtual Reality helmet and floated down a calm 3D computer generated virtual river while listening to digitized DBT® mindfulness skills training instructions. On subjective questionnaires completed by the participants before and after the VR DBT® mindfulness skills training session, participants reported increases/improvements in state of mindfulness, and reductions in negative emotional states. After VR, participants reported significantly less sadness, anger, and anxiety, and reported being significantly more relaxed. Participants reported a moderate to strong illusion of going inside the 3D computer generated world (i.e., moderate to high "presence" in VR and showed high acceptance of VR as a technique to practice mindfulness. These results show encouraging preliminary evidence of the feasibility and acceptability

  20. Human exposure to trace elements through the skin by direct contact with clothing: Risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rovira, Joaquim [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenç 21, 43201 Reus, Catalonia (Spain); Environmental Engineering Laboratory, Departament d' Enginyeria Quimica, Universitat Rovira i Virgili, Av. Països Catalans 26, 43007 Tarragona, Catalonia (Spain); Nadal, Martí [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenç 21, 43201 Reus, Catalonia (Spain); Schuhmacher, Marta [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenç 21, 43201 Reus, Catalonia (Spain); Environmental Engineering Laboratory, Departament d' Enginyeria Quimica, Universitat Rovira i Virgili, Av. Països Catalans 26, 43007 Tarragona, Catalonia (Spain); Domingo, José L., E-mail: joseluis.domingo@urv.cat [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenç 21, 43201 Reus, Catalonia (Spain)

    2015-07-15

    Metals in textile products and clothing are used for many purposes, such as metal complex dyes, pigments, mordant, catalyst in synthetic fabrics manufacture, synergists of flame retardants, antimicrobials, or as water repellents and odour-preventive agents. When present in textile materials, heavy metals may mean a potential danger to human health. In the present study, the concentrations of a number of elements (Al, As, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sm, Sn, Sr, Tl, V, and Zn) were determined in skin-contact clothes. Analysed clothes were made of different materials, colours, and brands. Interestingly, we found high levels of Cr in polyamide dark clothes (605 mg/kg), high Sb concentrations in polyester clothes (141 mg/kg), and great Cu levels in some green cotton fabrics (around 280 mg/kg). Dermal contact exposure and human health risks for adult males, adult females, and for <1-year-old children were assessed. Non-carcinogenic and carcinogenic risks were below safe (HQ<1) and acceptable (<10{sup −6}) limits, respectively, according to international standards. However, for Sb, non-carcinogenic risk was above 10% of the safety limit (HQ>0.1) for dermal contact with clothes. - Highlights: • We determined in skin-contact clothes the concentrations of a number of metals. • Dermal contact exposure and health risks for adults and for 1-year-old children were assessed. • Carcinogenic risks were considered as acceptable (<10{sup −6}). • For non-carcinogenic risks, only Sb exceeded a 10% of the HQ for dermal contact with clothes.

  1. THE CURRENT STATE OF CLOTHING TRADE IN THE BALKAN COUNTRIES

    OpenAIRE

    TRIPA Simona; CUC Sunhilde; YALDIZ Suleyman

    2017-01-01

    The study presented here is aimed at analysing the current state of clothing trade in the Balkan states. The dynamics of change over a 15‐year period following economic reforms are revealed. The clothing industries play a significant role and continue to contribute to the economic prosperity of countries with an inexpensive labour force. For most Balkan States clothing’s export plays an important role in promoting economic growth and development – for example, exports of garments Albania was ...

  2. Two-Stage Performance Engineering of Container-based Virtualization

    Directory of Open Access Journals (Sweden)

    Zheng Li

    2018-02-01

    Full Text Available Cloud computing has become a compelling paradigm built on compute and storage virtualization technologies. The current virtualization solution in the Cloud widely relies on hypervisor-based technologies. Given the recent booming of the container ecosystem, the container-based virtualization starts receiving more attention for being a promising alternative. Although the container technologies are generally considered to be lightweight, no virtualization solution is ideally resource-free, and the corresponding performance overheads will lead to negative impacts on the quality of Cloud services. To facilitate understanding container technologies from the performance engineering’s perspective, we conducted two-stage performance investigations into Docker containers as a concrete example. At the first stage, we used a physical machine with “just-enough” resource as a baseline to investigate the performance overhead of a standalone Docker container against a standalone virtual machine (VM. With findings contrary to the related work, our evaluation results show that the virtualization’s performance overhead could vary not only on a feature-by-feature basis but also on a job-to-job basis. Moreover, the hypervisor-based technology does not come with higher performance overhead in every case. For example, Docker containers particularly exhibit lower QoS in terms of storage transaction speed. At the ongoing second stage, we employed a physical machine with “fair-enough” resource to implement a container-based MapReduce application and try to optimize its performance. In fact, this machine failed in affording VM-based MapReduce clusters in the same scale. The performance tuning results show that the effects of different optimization strategies could largely be related to the data characteristics. For example, LZO compression can bring the most significant performance improvement when dealing with text data in our case.

  3. ATLASrift - a Virtual Reality application

    CERN Document Server

    INSPIRE-00225336; Moyse, Edward; Bianchi, Riccardo Maria

    2015-01-01

    We present ATLASrift - a Virtual Reality application that provides an interactive, immersive visit to ATLAS experiment. We envision it being used in two different ways: first as an educational and outreach tool - for schools, universities, museums and interested individuals, and secondly as an event viewer for ATLAS physicists - for them it will provide a much better spatial awareness of an event, track and jet directions, occupancies and interactions with detector structures. Using it, one can learn about the experiment as a whole, visit individual sub-detectors, view real interactions, or take a scripted walkthrough explaining questions physicists are trying to answer. We briefly describe our platform of choice - OculusRift VR system, the development environment - UnrealEngine, and, in detail, the numerous technically demanding requirements that had to be fulfilled in order to provide a comfortable user experience. Plans for future versions include making the experience social by adding multi-user/virtual p...

  4. Clothing as a symbol of charity and soul salvation in late Medieval Kotor (Cattaro

    Directory of Open Access Journals (Sweden)

    Živković Valentina

    2008-01-01

    Full Text Available Religious practices in late medieval Kotor included charitable acts of donating clothes to the poor as a form of imitatio Christi. The model of charity for the faithful to follow was set in the vitae of widely-favoured saints such as Sts Martin of Tours, Francis of Assisi and Catherine of Sienna, whose portraits were painted on the walls of Kotor’s church of St Anne in the second half of the fifteenth century. Evidence for the prac­tice and purpose of this particular form of charity is found in the surviving wills of the citizens of Kotor. Apart from giving clothes to the poor out of concern pro remedio animae, the motif of clothes features in the deceased’s testamentary instructions for burial in the habit of a mendicant order.

  5. Classroom Temperature, Clothing and Thermal Comfort -- A Study of Secondary School Children in Summertime. Building Research Establishment Current Paper 22/74.

    Science.gov (United States)

    Humphreys, M. A.

    1974-01-01

    This article describes a study of summertime classroom temperature and its relationship to the clothing worn by English secondary school children. Data on classroom temperatures and children's clothing were recorded during one summer for a total of 987 lessons. Analysis of the data showed that the strong clothing-temperature correlation could be…

  6. addressing low-literacy in the south african clothing retail environment

    African Journals Online (AJOL)

    user

    Literacy is based on the ability to read and write, as well ... is a concern for consumers' efficient decision making in the .... Concrete reasoning by low-literate consumers manifests in .... meanings and explanations of their clothing market reality ...

  7. Clothing Company Pegs Chinese Retail Market

    Institute of Scientific and Technical Information of China (English)

    WuAlun

    2003-01-01

    Using a flurry of brand and marketing strategies, Zheng Yonggang has staged the most astonishing turnaround in China's clothing industry. The once insolvent State-owned factory that Zheng was transferred to in 1989 now boasts the country's top fashion brands, and is quickly becoming a multi-business conglomerate. In 1994, the FIRS

  8. Etnografía virtual Virtual ethnography: exploring a methodological option for the research on virtual learning environments.

    Directory of Open Access Journals (Sweden)

    Álvarez Cadavid Gloria María

    2009-01-01

    Full Text Available Este artículo pretende esbozar algunas de las consideraciones metodológicas que hoy confluyen en el estudio de los ambientes virtuales, desde la opción etnográfica. De manera específica se quiere observar la forma en que, algunos investigadores han abordado el aspecto metodológico para estudiar los ambientes virtuales, líneas de evolución y posible contribución al conocimiento y mejoramiento de los procesos de e-learning. This article aims to outline some methodological considerations that merge together on the study of virtual learning environments, especially from the ethnographic perspective. Specifically, what we want to observe, is the way some researchers have approached the methodological aspect in order to study virtual learning environments, the evolution lines and the possible contribution they’ve made to knowledge and improvement of e-learning processes.

  9. Deeply virtual compton scattering on a virtual pion target

    International Nuclear Information System (INIS)

    Amrath, D.; Diehl, M.; Lansberg, J.P.; Heidelberg Univ.

    2008-07-01

    We study deeply virtual Compton scattering on a virtual pion that is emitted by a proton. Using a range of models for the generalized parton distributions of the pion, we evaluate the cross section, as well as the beam spin and beam charge asymmetries in the leading-twist approximation. Studying Compton scattering on the pion in suitable kinematics puts high demands on both beam energy and luminosity, and we find that the corresponding requirements will first be met after the energy upgrade at Jefferson Laboratory. As a by-product of our study, we construct a parameterization of pion generalized parton distributions that has a non-trivial interplay between the x and t dependence and is in good agreement with form factor data and lattice calculations. (orig.)

  10. Consumption and the constitution of age: expenditure patterns on clothing, hair and cosmetics among post-war 'baby boomers'.

    Science.gov (United States)

    Twigg, Julia; Majima, Shinobu

    2014-08-01

    The article addresses debates around the changing nature of old age, using U.K. data on spending on dress and related aspects of appearance by older women to explore the potential role of consumption in the reconstitution of aged identities. Based on pseudo-cohort analysis of Family Expenditures Survey, it compares spending patterns on clothing, cosmetics and hairdressing, 1961-2011. It concludes that there is little evidence for the 'baby boomers' as a strategic or distinctive generation. There is evidence, however, for increased engagement by older women in aspects of appearance: shopping for clothes more frequently; more involved in the purchase of cosmetics; and women over 75 are now the most frequent attenders at hairdressers. The roots of these patterns, however, lie more in period than cohort effects, and in the role of producer-led developments such as mass cheap fashion and the development of anti-ageing products. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI) in Virtual Environment

    OpenAIRE

    Erlinda Muslim; Boy Nurtjahyo; Romadhani Ardi

    2011-01-01

    This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics  study  using Posture Evaluation Index (PEI). PEI integrates  the scores of  low back analysi...

  12. Comparative Analysis of the Thermal Insulation of Traditional and Newly Designed Protective Clothing for Foundry Workers

    Directory of Open Access Journals (Sweden)

    Iwona Frydrych

    2016-09-01

    Full Text Available An objective of the undertaken research was checking the applicability of aluminized basalt fabrics for the production of clothing for foundry workers. The results of flammability, the resistance to contact, convective and radiation heat, as well as the resistance to big molten metal splashes confirmed the thesis of applicability of the packages with the use of aluminized basalt fabric content for the assumed purpose; therefore, such protective clothing was produced. Thermal comfort of foundry workers is very important and related to many factors, i.e., the structure of the protective clothing package, the number of layers, their thickness, the distance between the body and appropriate underwear. In the paper, a comparison of the results of thermal insulation measurement of two kinds of protective clothing is presented: the traditional one made of aluminized glass fabrics and the new one made of aluminized basalt fabrics. Measurements of clothing thermal insulation were conducted using a thermal manikin dressed in the protective clothing and three kinds of underwear products covering the upper and lower part of the manikin.

  13. On Being Bored and Lost (in Virtuality)

    Science.gov (United States)

    Moore, Kristen; Pflugfelder, Ehren Helmut

    2010-01-01

    Education in virtual worlds has the potential, it seems, for engaging students in innovative ways and for enabling new discourses on a host of issues. Virtual locations like "Second Life," "Kaneva," or "World of Warcraft," among other multi-user virtual environments (MUVEs), also come with unique challenges for educators as they consider the…

  14. A Review of 'Threadbare: Clothes, Sex and Trafficking'

    Directory of Open Access Journals (Sweden)

    Dominic Davies

    2017-06-01

    Full Text Available This review offers an account of journalist Anne Elizabeth Moore’s short comics, co-authored with the Ladydrawers collective, relating to the fashion industry and global apparel and sex trades, and that have been recently collected together in book form. The review argues that the resulting book, 'Threadbare: Clothes, Sex & Trafficking' (2016, is evidence of the ability of the comics form to document social justice issues with nuance, yet without losing sight of the politically imperative calls for change that those issues demand.   'Threadbare: Clothes, Sex and Trafficking', by The Ladydrawers and Anne Elizabeth Moore, Portland: Microcosm Publishing, 2016. Paperback, 160 pages, 6 x 8, 2 colour interior (8.1 oz, Published May 3, 2016, ISBN: 978-1-62106-739-9

  15. Benzothiazole, benzotriazole, and their derivates in clothing textiles--a potential source of environmental pollutants and human exposure.

    Science.gov (United States)

    Avagyan, Rozanna; Luongo, Giovanna; Thorsén, Gunnar; Östman, Conny

    2015-04-01

    Textiles play an important role in our daily life, and textile production is one of the oldest industries. In the manufacturing chain from natural and/or synthetic fibers to the final clothing products, the use of many different chemicals is ubiquitous. A lot of research has focused on chemicals in textile wastewater, but the knowledge of the actual content of harmful chemicals in clothes sold on the retail market is limited. In this paper, we have focused on eight benzothiazole and benzotriazole derivatives, compounds rated as high production volume chemicals. Twenty-six clothing samples of various textile materials and colors manufactured in 14 different countries were analyzed in textile clothing using liquid chromatography tandem mass spectrometry. Among the investigated textile products, 11 clothes were for babies, toddlers, and children. Eight of the 11 compounds included in the investigation were detected in the textiles. Benzothiazole was present in 23 of 26 investigated garments in concentrations ranging from 0.45 to 51 μg/g textile. The garment with the highest concentration of benzothiazole contained a total amount of 8.3 mg of the chemical. The third highest concentration of benzothiazole (22 μg/g) was detected in a baby body made from "organic cotton" equipped with the "Nordic Ecolabel" ("Svanenmärkt"). It was also found that concentrations of benzothiazoles in general were much higher than those for benzotriazoles. This study implicates that clothing textiles can be a possible route for human exposure to harmful chemicals by skin contact, as well as being a potential source of environmental pollutants via laundering and release to household wastewater.

  16. Intelligent Virtual Assistant's Impact on Technical Proficiency within Virtual Teams

    Science.gov (United States)

    Graham, Christian; Jones, Nory B.

    2016-01-01

    Information-systems development continues to be a difficult process, particularly for virtual teams that do not have the luxury of meeting face-to-face. The research literature on this topic reinforces this point: the greater part of database systems development projects ends in failure. The use of virtual teams to complete projects further…

  17. Ordinary Portland Cement matrix for solidification of cellulosic protective clothes hazardous wastes

    International Nuclear Information System (INIS)

    Shatta, H.A.; Saleh, H.M.

    2006-01-01

    The used cellulosic protective clothes constitutes considerable fraction of the hazardous and radioactive wastes accumulated during the practical daily life. The direct solidification of these wastes with ordinary Portland cement resulted in waste forms having undesired characters, therefore, it is recommended to immobilize the secondary waste solutions coming from the oxidative degradation of the used protective clothes waste simulates rather than direct imbedding. IR analyses, X-ray diffraction and thermal characteristics for products of both direct encapsulation of the waste and the cementation of its degradation products were performed to evaluate the properties of the final waste cemented form before their disposal. Based on the results reached from X-ray diffraction, IR spectrograms and thermal analyses reports, it could be stated that no detectable changes in hydration and curing coarse of ordinary Portland cement when mixing the residual secondary waste solution resulting from the oxidative degradation of the used protective clothes waste simulate compared with mixing cement with water and in reverse with imbedding the unprocessed waste in cement matrix

  18. New production concepts in the clothing industry : new ways of work for unpredictable markets : results from a European survey

    NARCIS (Netherlands)

    Dhondt, S.; Peeters, M.H.H.

    1994-01-01

    This brochure summarises the results of a survey carried out among 86 clothing companies representing eight different West European countries. The research examined the effect of new ways of work in clothing companies on personnel policy, on the organisation of work and on the effectiveness of the

  19. THE BRAZIL-BOLIVIA BORDER AND THE SECOND-HAND CLOTHING DISTRIBUTION NETWORK

    OpenAIRE

    Tito Carlos Machado Oliveira; Fernanda Loureiro Ferreira

    2015-01-01

    The second-hand clothing trade started widely in Bolivia in 1994. This kind of trade usually involves popular globalization activities, whose practices are often identified by State agencies as illegal, although with natural popular acceptance. It is established within a complex system of networks, and takes advantage of distribution (stock and transfer) meshes and knots, with the consequent conformation of connected territorial circuits. This paper aims at analyzing the second-hand clothing ...

  20. Contamination of clothing and other items by sweat during exercise 201Tl myocardial perfusion scintigraphy

    International Nuclear Information System (INIS)

    Yokoo, Shigeki; Niio, Yasuo; Yamamoto, Tomoaki; Miyashita, Makoto

    1999-01-01

    We measured the radioactivity on patient's upper and lower garments, towels, broad sashes for the bust, and electrodes contaminated by sweat due to exercise 201 Tl myocardial perfusion scintigraphy. In measuring activity, a scintillation survey meter adjusted to the energy of 201 Tl was used. In measuring the radioactivity of clothing, more than 4 Bq/cm 2 was considered to be a significant level of contamination. We detected contamination in 30% of upper garments and towels, 19% of broad sashes, 8% of lower garments and 4% of electrodes. Among these materials, several items of clothing and other items showed contamination exceeding 40 Bq/cm 2 . Towels were remarkably contaminated, with one towel showing a maximum contamination level of 420 Bq/cm 2 . Examinations done by exercise 201 Tl myocardial perfusion scintigraphy often result in the contamination of clothing and other items through sweating. This contamination is especially common in summer, particularly in upper garments and towels. The contamination ratio for towels was over 50%. The contamination ratio increased as the level of exercise became more difficult. When the exercise load was more than 100 W, the contamination ratio was 50%. In cases of extreme contamination, images of contaminated upper garments could be obtained by the scintigraphy camera. The areas of high activity on the images seemed to correspond to areas of the body where sweating was profuse. Based on these results, we should pay close attention to the handling of clothing and other items used in exercise testing by 201 Tl myocardial perfusion scintigraphy and the points used in measuring contaminated clothing and other items after testing. (author)

  1. The effect of clothing fit and material of women’s Islamic sportswear on physiological and subjective responses during exercise in warm and humid environment

    OpenAIRE

    Wibowo Astrid Wahyu Adventri; Wijayanto Titis; Widyastuti Watri; Herliansyah Muhammad Kusumawan

    2018-01-01

    The purpose of this study was to investigate the effects of clothing fit and material of Islamic sportswear for female on physiological responses and body heat balance during exercise in warm and humid environment. Twelve healthy female students (20.3±0.4 years) exercised wearing four types of women’s Islamic sportswear comprised of two level of clothing fit: loose-fit and tight-fit, and two types of material for sportswear: cotton and polyester on four separate occasions, and in random order...

  2. NOVEL ECOMMERCE TECHNOLOGIES FOR THE CLOTHING INDUSTRY: FASHIONPHORIA-A SOCIAL FASHION PLATFORM

    Directory of Open Access Journals (Sweden)

    VYNIAS Dionysios

    2016-05-01

    Full Text Available Fashion industry is one of the most vibrant and creative sector in Europe. Having over 5 million people directly employed in the fashion value chain and 850,000 companies established, this industry provides an important contribution to the EU economy with an annual turnover of EUR 525 billion. Despite the global competition, European retailers have managed to be competitive by moving to high- added value products, serving niche markets and investing on technology and novel ecommerce tools. Fashion is in a transition phase where digital brands and eshops try to engage more shoppers, provide unique experiences and increase revenues. However, conversion rates are still low, competition is fierce and novel products and services are required in order to capture the attention of the consumer. More customer behaviors regarding fashion preferences of the users are needed and new advertising techniques have to be implemented in the sector. In this paper, the market trends regarding clothing and eCommerce in Europe are provided. In addition, a market research is presented that reveals the need for a social fashion platform in Greece coupled with the expectations that an shopper has for a fashion aggregator. The basic functionalities of Fashionphoria, a novel social fashion platform are presented and the benefits for the fashionistas and the brands are outlined.

  3. Electrothermal adsorption and desorption of volatile organic compounds on activated carbon fiber cloth

    Energy Technology Data Exchange (ETDEWEB)

    Son, H.K. [Department of Health and Environment, Kosin University, Dong Sam Dong, Young Do Gu, Busan (Korea, Republic of); Sivakumar, S., E-mail: ssivaphd@yahoo.com [Department of Bioenvironmental Energy, College of Natural Resource and Life Science, Pusan National University, Miryang-si, Gyeongsangnam-do 627-706 (Korea, Republic of); Rood, M.J. [Department of Civil and Environmental Engineering, University of Illinois, Urbana, IL (United States); Kim, B.J. [Construction Engineering Research Laboratory, U.S. Army Engineer Research and Development Center (ERDC-CERL), Champaign, IL (United States)

    2016-01-15

    Highlights: • We study the adsorption and desorption of VOCs by an activated carbon fiber cloth. • Desorption concentration was controlled via electrothermal heating. • The desorption rate was successfully equalized and controlled by this system. - Abstract: Adsorption is an effective means to selectively remove volatile organic compounds (VOCs) from industrial gas streams and is particularly of use for gas streams that exhibit highly variable daily concentrations of VOCs. Adsorption of such gas streams by activated carbon fiber cloths (ACFCs) and subsequent controlled desorption can provide gas streams of well-defined concentration that can then be more efficiently treated by biofiltration than streams exhibiting large variability in concentration. In this study, we passed VOC-containing gas through an ACFC vessel for adsorption and then desorption in a concentration-controlled manner via electrothermal heating. Set-point concentrations (40–900 ppm{sub v}) and superficial gas velocity (6.3–9.9 m/s) were controlled by a data acquisition and control system. The results of the average VOC desorption, desorption factor and VOC in-and-out ratio were calculated and compared for various gas set-point concentrations and superficial gas velocities. Our results reveal that desorption is strongly dependent on the set-point concentration and that the VOC desorption rate can be successfully equalized and controlled via an electrothermal adsorption system.

  4. Exploring Clothing as a Barrier to Workplace Participation Faced by People Living with Disabilities

    Directory of Open Access Journals (Sweden)

    Kerri McBee-Black

    2018-03-01

    Full Text Available In response to research which argues that people living with a disability (PLWD face societal barriers including workplace participation, this study explored how the barriers to social participation, specifically workplace participation, faced by PLWD are exacerbated by the lack of appropriate clothing and the role that stigma, self-efficacy, and clothing have in workplace participation. Finding appropriate clothing is a significant barrier to social participation for many PLWD. The social model of disability used in this study supports this by suggesting that it is society which places barriers to PLWD rather than their disability. A qualitative inquiry of semi-structured, in-depth interviews was used, and the results showcase six sub-themes of barriers: work defines me, disability as the barrier to workplace participation, work allows extra societal opportunities, stigma questions my self-efficacy, workplace accommodations diminish my stigma, and clothing builds my self-efficacy. The study found that, for PLWD, workplace participation is hindered because of occupational typecasting and lack of appropriate clothing, which increases their stigma and decreases their self-efficacy. The contributions of this study include theory support, policy, community, and educational enhancement.

  5. VIRTUAL CULTURAL LANDSCAPE LABORATORY BASED ON INTERNET GIS TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    R. Bill

    2012-07-01

    Full Text Available In recent years the transfer of old documents (books, paintings, maps etc. from analogue to digital form has gained enormous importance. Numerous interventions are concentrated in the digitalisation of library collections, but also commercial companies like Microsoft or Google try to convert large analogue stocks such as books, paintings, etc. in digital form. Data in digital form can be much easier made accessible to a large user community, especially to the interested scientific community. The aim of the described research project is to set up a virtual research environment for interdisciplinary research focusing on the landscape of the historical Mecklenburg in the north-east of Germany. Georeferenced old maps from 1786 and 1890 covering complete Mecklenburg should be combined with current geo-information, satellite and aerial imagery to support spatio-temporal research aspects in different scales in space (regional 1:200,000 to local 1:25.000 and time (nearly 250 years in three time steps, the last 30 years also in three time slices. The Virtual Laboratory for Cultural Landscape Research (VKLandLab is designed and developed by the Chair of Geodesy and Geoinformatics, hosted at the Computing Centre (ITMZ and linked to the Digital Library (UB at Rostock University. VKLandLab includes new developments such as wikis, blogs, data tagging, etc. and proven components already integrated in various data-related infrastructures such as InternetGIS, data repositories and authentication structures. The focus is to build a data-related infrastructure and a work platform that supports students as well as researchers from different disciplines in their research in space and time.

  6. Stimulation of methanogenesis in anaerobic digesters treating leachate from a municipal solid waste incineration plant with carbon cloth.

    Science.gov (United States)

    Lei, Yuqing; Sun, Dezhi; Dang, Yan; Chen, Huimin; Zhao, Zhiqiang; Zhang, Yaobin; Holmes, Dawn E

    2016-12-01

    Bio-methanogenic digestion of incineration leachate is hindered by high OLRs, which can lead to build-up of VFAs, drops in pH and ultimately in reactor souring. It was hypothesized that incorporation of carbon cloth into reactors treating leachate would promote DIET and enhance reactor performance. To examine this possibility, carbon cloth was added to laboratory-scale UASB reactors that were fed incineration leachate. As expected, the carbon-cloth amended reactor could operate stably with a 34.2% higher OLR than the control (49.4 vs 36.8kgCOD/(m 3 d)). Microbial community analysis showed that bacteria capable of extracellular electron transfer and methanogens known to participate in DIET were enriched on the carbon cloth surface, and conductivity of sludge from the carbon cloth amended reactor was almost twofold higher than sludge from the control (9.77 vs 5.47μS/cm), suggesting that microorganisms in the experimental reactor may have been expressing electrically conductive filaments. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Immobilization of flavin adenine dinucleotide (FAD) onto carbon cloth and its application as working electrode in an electroenzymatic bioreactor.

    Science.gov (United States)

    Jayabalan, R; Sathishkumar, M; Jeong, E S; Mun, S P; Yun, S E

    2012-11-01

    A high porosity carbon cloth with immobilized FAD was employed as working electrode in electrochemical NADH-regeneration procedure. Carbon cloth was oxidized with hot acids to create surface carboxyl group and then coupled by adenine amino group of FAD with carbodiimide in the presence of N-hydroxysulfosuccinimide. The bioelectrocatalytic NADH-regeneration was coupled to the conversion of achiral substrate pyruvate into chiral product l-lactate by l-lactate dehydrogenase (l-LDH) within the same reactor. The conversion was completed at 96h in bioreactor with FAD-modified carbon cloth, resulting in about 6mM of l-lactate from 10mM of pyruvate. While with bare carbon cloth, the yield at 120h was around 5mM. Immobilized FAD on the surface of carbon cloth electrode facilitated it to carry electrons from electrode to electron transfer enzymes; thereby NADH-regeneration was accelerated to drive the enzymatic reaction efficiently. Copyright © 2012 Elsevier Ltd. All rights reserved.

  8. The influence of loyalty programs on customer´s loyalty with a focus on branded clothing stores

    OpenAIRE

    Běhounková, Klára

    2011-01-01

    This bachelor statement deals with the influence of loyalty programs on customer's loyalty with a focus on branded clothing stores. It defines a customer, his behavior, decision-making process and his loyalty to a firm. Also it defines marketing communication with customer,sales promotion, loyalty programs including species and benefits. It states specific loyalty programs Blažek, Reserved, Orsay, Marks&Spencer a S. Oliver. Final part evaluates the research of loyalty cards and their usage of...

  9. 46 CFR 153.933 - Chemical protective clothing.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Chemical protective clothing. 153.933 Section 153.933 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS... Protective Clothing”, Third Edition, 1987, available from the American Conference of Governmental Industrial...

  10. Assessing suturing techniques using a virtual reality surgical simulator.

    Science.gov (United States)

    Kazemi, Hamed; Rappel, James K; Poston, Timothy; Hai Lim, Beng; Burdet, Etienne; Leong Teo, Chee

    2010-09-01

    Advantages of virtual-reality simulators surgical skill assessment and training include more training time, no risk to patient, repeatable difficulty level, reliable feedback, without the resource demands, and ethical issues of animal-based training. We tested this for a key subtask and showed a strong link between skill in the simulator and in reality. Suturing performance was assessed for four groups of participants, including experienced surgeons and naive subjects, on a custom-made virtual-reality simulator. Each subject tried the experiment 30 times using five different types of needles to perform a standardized suture placement task. Traditional metrics of performance as well as new metrics enabled by our system were proposed, and the data indicate difference between trained and untrained performance. In all traditional parameters such as time, number of attempts, and motion quantity, the medical surgeons outperformed the other three groups, though differences were not significant. However, motion smoothness, penetration and exit angles, tear size areas, and orientation change were statistically significant in the trained group when compared with untrained group. This suggests that these parameters can be used in virtual microsurgery training.

  11. Heat strain in personal protective clothing: Challenges and intervention strategies

    NARCIS (Netherlands)

    McLellan, T.M.; Daanen, H.A.M.

    2012-01-01

    Humans rely on sweat evaporation during exercise in the heat to promote cooling and to maintain thermal homeostasis. In protective clothing, however, sweat evaporation is severely hampered and this may lead to uncompensable heat strain, where core body temperature continues to rise leading to

  12. Report on achievements of research and development of an automatic sewing system in fiscal 1986. Cloth handling technology; 1986 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-03-01

    The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on the 'development of an automatic sewing system'. The association has performed the research and development by dividing the subject into such component technologies as a total system and sewing preparation and processing technology, a sewing and assembling technology, a cloth handling technology, and a system management and control technology. This paper reports the achievement of the research on the cloth handling technology. This technology may be divided into such component technologies as (1) the cloth holding technology, (2) the high-functional positioning technology, and (3) the soft cloth moving technology. For the technology (1), development was made on the principle models, such as the vertical holding and parallel holding type modules and the cloth operating type module, as well as on the principle model for an auxiliary equipment for holding cloth edges. For the technology (2), development was made on the handler, controller, and coordinated operation control and teaching system. Discussions were given on optimal device configuration, functions required in the devices, and evaluation methods, as the high-functional positioning technology for the sewing process and pressing process. Prototype devices were designed and fabricated. For the technology (3), prototype models of the improved version were fabricated for the stock module and confluence model, their functions and performances were confirmed, and problems and points requiring improvement were extracted for prototype fabrication. (NEDO)

  13. Report on achievements of research and development of an automatic sewing system in fiscal 1986. Cloth handling technology; 1986 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-03-01

    The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on the 'development of an automatic sewing system'. The association has performed the research and development by dividing the subject into such component technologies as a total system and sewing preparation and processing technology, a sewing and assembling technology, a cloth handling technology, and a system management and control technology. This paper reports the achievement of the research on the cloth handling technology. This technology may be divided into such component technologies as (1) the cloth holding technology, (2) the high-functional positioning technology, and (3) the soft cloth moving technology. For the technology (1), development was made on the principle models, such as the vertical holding and parallel holding type modules and the cloth operating type module, as well as on the principle model for an auxiliary equipment for holding cloth edges. For the technology (2), development was made on the handler, controller, and coordinated operation control and teaching system. Discussions were given on optimal device configuration, functions required in the devices, and evaluation methods, as the high-functional positioning technology for the sewing process and pressing process. Prototype devices were designed and fabricated. For the technology (3), prototype models of the improved version were fabricated for the stock module and confluence model, their functions and performances were confirmed, and problems and points requiring improvement were extracted for prototype fabrication. (NEDO)

  14. Review Essay : Virtually Alive or Questionably Dead? The Ambivalence of Modern Korean Identity in Literature and Cinema

    Directory of Open Access Journals (Sweden)

    Kim, Kyu Hyun

    2012-06-01

    Full Text Available Theodore Hughes, Literature and Film in Cold War South Korea: Freedom's Frontier. New York: Columbia University Press, 2012. 304 pp. $55 (cloth.Kyung Hyun Kim, Virtual Hallyu: Korean Cinema of the Global Era. Durham, NC: Duke University Press, 2011, pp. 208. $90 (cloth, $25 (paper.The studies by Kyung Hyun Kim and Theodore Hughes discussed in this essay are rich with information and insights but are also challenging, almost subversive, to some prevalent views on Korean cinema and literature. While Kim looks into contemporary, post-1990s Korean films operating in the global market as an important (but perhaps since 2000 not the most influential wing of the hallyu (“Korean Wave” trend, Hughes deals primarily with early postwar literature and visual arts (including cinema from 1945 to roughly the early 1970s. Both authors are concerned with the history and contemporaneity of Korean identity and with the manners in which this localized identity is constituted, specifically in relation to colonial modernity, global late capitalism, and ethnocentric nationalism. They also address the problematic status of cinema in the context of Korean culture and history, sometimes developing arguments in unexpected directions.

  15. Temperature and energy consumption for clothing dryer; Temperatura e consumo de energia em secadora de vestuario

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Jefferson Almeida; Magalhaes Filho, Paulo [UNESP, Guaratingueta, SP (Brazil). Faculdade de Engenharia. Dept. de Energia]. E-mail: pfilho@feg.unesp.br

    2000-07-01

    The cloth dehumidification is done by hot air circulation through it in dryers. The air circulation is done by a fan, run by an electrical motor, and the air temperature raise, which goes through the cloths aiming their moisture dragging, is gotten by the heat dissipation from electrical resistance. This work shows the results of an experimental modeling, examining the behavior of several kinds of cloth in a vertical suspense-type dryer, such as: polyester, cotton-spandex, flannel, blue-jeans and viscose rayon. It was analyzed the behavior of the moisture content in these cloths related to controlled-temperature-air flows, determining the needed heat to reach the required drying standards. The drying device fans were tested for the determination of their flow rate and energy consumption, establishing a flow rate versus consumption relationship. Comparative results among the various kinds of cloths are presented. (author)

  16. Consumers in a social network: the perception of clothing quality per gender

    Directory of Open Access Journals (Sweden)

    José Sarto Freire Castelo

    2018-01-01

    Full Text Available Purpose – The general objective of this paper is to evaluate the determinant attributes of the perception of clothing quality by the users of a social network and to verify if there are any differences of evaluation of these determinants between genders. Design/methodology/approach – To achieve the objective, a survey was conducted with a sample of 295 consumers. All participants, regardless of gender, were asked to access the SurveyMonkey site link and to answer the questions regarding the quality of clothing for both men and women. Data analysis was performed using descriptive statistics and variance analysis (ANOVA. Findings – The main results show that: 1. The consumers of garments regard as highly important to take into consideration quality attributes when deciding to buy clothes, especially for women in relation to menswear; 2. Women has a higher perception than men as for the evaluation of the quality attributes of both women’s wear and menswear; and, 3. Clothing consumers, in particular consumers of women’s products, only consider to purchase such products if they have, in particular, style, fabric quality and fair price. Originality/value – This research filled in some theoretical and methodological gaps with regard to giving emphasis to gender differences in clothing quality assessment. This is in line with the conclusions of quality research conducted long ago, such as Olson & Jacoby’s (1972, which findings are specific to the type of product and/or consumer investigated. Therefore, generalizations beyond the product or the consumers examined are of dubious validity.

  17. Core-Shell-Yarn-Based Triboelectric Nanogenerator Textiles as Power Cloths.

    Science.gov (United States)

    Yu, Aifang; Pu, Xiong; Wen, Rongmei; Liu, Mengmeng; Zhou, Tao; Zhang, Ke; Zhang, Yang; Zhai, Junyi; Hu, Weiguo; Wang, Zhong Lin

    2017-12-26

    Although textile-based triboelectric nanogenerators (TENGs) are highly promising because they scavenge energy from their working environment to sustainably power wearable/mobile electronics, the challenge of simultaneously possessing the qualities of cloth remains. In this work, we propose a strategy for TENG textiles as power cloths in which core-shell yarns with core conductive fibers as the electrode and artificial polymer fibers or natural fibrous materials tightly twined around core conductive fibers are applied as the building blocks. The resulting TENG textiles are comfortable, flexible, and fashionable, and their production processes are compatible with industrial, large-scale textile manufacturing. More importantly, the comfortable TENG textiles demonstrate excellent washability and tailorability and can be fully applied in further garment processing. TENG textiles worn under the arm or foot have also been demonstrated to scavenge various types of energy from human motion, such as patting, walking, and running. All of these merits of proposed TENG textiles for clothing uses suggest their great potentials for viable applications in wearable electronics or smart textiles in the near future.

  18. 30 CFR 77.1710 - Protective clothing; requirements.

    Science.gov (United States)

    2010-07-01

    ... footwear. (f) Snug-fitting clothing when working around moving machinery or equipment. (g) Safety belts and... Section 77.1710 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND...

  19. Microsoft Virtualization Master Microsoft Server, Desktop, Application, and Presentation Virtualization

    CERN Document Server

    Olzak, Thomas; Boomer, Jason; Keefer, Robert M

    2010-01-01

    Microsoft Virtualization helps you understand and implement the latest virtualization strategies available with Microsoft products. This book focuses on: Server Virtualization, Desktop Virtualization, Application Virtualization, and Presentation Virtualization. Whether you are managing Hyper-V, implementing desktop virtualization, or even migrating virtual machines, this book is packed with coverage on all aspects of these processes. Written by a talented team of Microsoft MVPs, Microsoft Virtualization is the leading resource for a full installation, migration, or integration of virtual syste

  20. A Review of Virtual Machine Attack Based on Xen

    Directory of Open Access Journals (Sweden)

    Ren xun-yi

    2016-01-01

    Full Text Available Virtualization technology as the foundation of cloud computing gets more and more attention because the cloud computing has been widely used. Analyzing the threat with the security of virtual machine and summarizing attack about virtual machine based on XEN to predict visible security hidden recently. Base on this paper can provide a reference for the further research on the security of virtual machine.

  1. The virtual museum of education. Identity, perspectives, attitudes

    Directory of Open Access Journals (Sweden)

    Chiara Baldassarri

    2010-07-01

    Full Text Available The museums conceived as spaces for communication are places where a prospective of lifelong learning is supported and facilitated. Hence, it is necessary to adopt didactic ways of communication that develop projects concerning innovations in the field of education through the application of new technologies in the museums themselves, in order to make those museums "virtual" by creating a complementary reality. The Scienze dell’Educazione department's research regarding the institution of a Museo dell’Educazione is working in this direction, trying to build a network that exploits the relationship among schools, institutions and museums. In dept, the aim of the analysis was individuate some guidelines for the creation of the Museo dell’Educazione website, beginning from a study of the main European virtual educational museums.

  2. Numerical modelling of transient heat and moisture transport in protective clothing

    International Nuclear Information System (INIS)

    Łapka, P; Furmański, P; Wisniewski, T S

    2016-01-01

    The paper presents a complex model of heat and mass transfer in a multi-layer protective clothing exposed to a flash fire and interacting with the human skin. The clothing was made of porous fabric layers separated by air gaps. The fabrics contained bound water in the fibres and moist air in the pores. The moist air was also present in the gaps between fabric layers or internal fabric layer and the skin. Three skin sublayers were considered. The model accounted for coupled heat transfer by conduction, thermal radiation and associated with diffusion of water vapour in the clothing layers and air gaps. Heat exchange due to phase transition of the bound water were also included in the model. Complex thermal and mass transfer conditions at internal or external boundaries between fabric layers and air gaps as well as air gap and skin were assumed. Special attention was paid to modelling of thermal radiation which was coming from the fire, penetrated through protective clothing and absorbed by the skin. For the first time non-grey properties as well as optical phenomena at internal or external boundaries between fabric layers and air gaps as well as air gap and skin were accounted for. A series of numerical simulations were carried out and the risk of heat injures was estimated. (paper)

  3. TRI Fotonovela Slideshow - Spanish

    Science.gov (United States)

    Presentation designed to introduce the basic concepts of the Toxics Release Inventory, including why TRI is an important resource for commmunities and which tool provides the easiest access to basic TRI data.

  4. Developing a national programme for textiles and clothing recovery.

    Science.gov (United States)

    Bukhari, Mohammad Abdullatif; Carrasco-Gallego, Ruth; Ponce-Cueto, Eva

    2018-04-01

    Textiles waste is relatively small in terms of weight as compared to other waste streams, but it has a large impact on human health and environment, and its rate is increasing due to the 'fast fashion' model. In this paper, we examine the French national programme for managing post-consumer textiles and clothing through a case study research. To date, France is the only country in the world implementing an extended producer responsibility (EPR) policy for end-of-use clothing, linen and shoes. The case highlights the benefits of using an EPR policy and provides interesting insights about the challenges faced by the textiles waste sector. For instance, the EPR policy has contributed to a threefold increase in the collection and recycling rates of post-consumer textiles since 2006. In addition, the material recovery rate of the post-consumer textiles can reach 90%, 50% of which can be directly reused. However, the 'reuse' stream is facing some challenges because its main market is in Africa and many African countries are considering banning the import of used textiles to encourage a competitive textiles industry locally and internationally. The EPR policy shows a great potential to identify new markets for 'reuse' and to improve the textiles waste sector. Such an EPR policy also could drive societies to financially support innovation and research to provide feasible solutions for fashion producers to adopt eco-design and design for recycling practices. This paper provides guidance for policy makers, shareholders, researchers and practitioners interested in diverting post-consumer textiles and clothing waste from landfills and promoting circular textiles transition.

  5. Research and Progress on Virtual Cloud Laboratory

    Directory of Open Access Journals (Sweden)

    Zhang Jian Wei

    2016-01-01

    Full Text Available In recent years, cloud computing technology has experienced continuous development and improvement, and has gradually expanded to the education sector. First, this paper will introduce the background knowledge of the current virtual cloud laboratory; by comparing the advantages and disadvantages between traditional laboratory and virtual cloud laboratory, and comparing the application, advantages and disadvantages, and development trend of OpenStack technology and VMWare technology in safety, performance, design, function, use case, and value of virtual cloud laboratory, this paper concludes that application based on OpenStack virtual cloud laboratory in universities and research institutes and other departments is essential.

  6. Global sourcing risk management approaches: A study of small clothing and textile retailers in Gauteng

    Directory of Open Access Journals (Sweden)

    Wesley Niemann

    2018-02-01

    Full Text Available Background: Global sourcing has increased as buyers searched for new markets that offered better pricing, quality, variety and delivery lead times than their local markets. However, the increase in global sourcing has also exposed businesses to many supply risks. Purpose: The purpose of this descriptive qualitative study was to explore the global sourcing supply risks encountered by small clothing and textile retailers in Gauteng and to determine what supply risk identification and management approaches they utilise. Method: This study utilised semi-structured interviews conducted with 12 small clothing and textile retail owners. Results: The study found that the three major supply risks encountered by these retailers were fluctuating exchange rates, communication barriers and costly and complicated logistics, which included high customs costs. Furthermore, although aware of the supply risks, none of the small clothing and textile retailers had formal identification and management approaches in place. Instead, risks are dealt with at the sole discretion of the owner as and when they occur. The study also found that informal identification and management approaches were being applied by some of the retailers. These included factoring exchange rate fluctuations into the profit margins and using translators to combat communication barriers. Contribution: The study is one of the first empirical studies conducted on global supply risks and the associated identification and management approaches in the South African small business context, specifically focused on clothing and textile retailers. Conclusion: Small clothing and textile retailers need to proactively identify and manage global sourcing risk using the identified approaches in order to reduce and mitigate potential supply disruptions.

  7. Hierarchical three-dimensional porous SnS{sub 2}/carbon cloth anode for high-performance lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Chao, Junfeng, E-mail: chchjjff@163.com [College of Electronic Information and Electric Engineering, Anyang Institute of Technology, Anyang 455000 (China); Zhang, Xiutai [College of Electronic Information and Electric Engineering, Anyang Institute of Technology, Anyang 455000 (China); Xing, Shumin [College of Mathematics and Physics, Anyang Institute of Technology, Anyang 455000 (China); Fan, Qiufeng; Yang, Junping; Zhao, Luhua; Li, Xiang [College of Electronic Information and Electric Engineering, Anyang Institute of Technology, Anyang 455000 (China)

    2016-08-15

    Graphical abstract: Hierarchical 3D porous SnS{sub 2}/carbon cloth, good electrochemical performance. - Highlights: • Hierarchical 3D porous SnS{sub 2}/carbon cloth has been firstly synthesized. • The SnS{sub 2}/carbon clothes were good candidates for excellent lithium ion batteries. • The SnS{sub 2}/carbon cloth exhibits improved capacity compared to pure SnS{sub 2}. - Abstract: Hierarchical three-dimension (3D) porous SnS{sub 2}/carbon clothes were synthesized via a facile polyol refluxing process. The as-synthesized samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmet–Teller (BET) and UV–vis diffuse reflectance spectrometer (UV–vis DRS). The 3D porous SnS{sub 2}/carbon clothes-based lithium ion batteries exhibited high reversible capacity and good rate capability as anode materials. The good electrochemical performance for lithium ion storage could be attributed to the special nanostructure, leading to high-rate transportation of electrolyte ion and electrons throughout the electrode matrix.

  8. On the Impossibility of Detecting Virtual Machine Monitors

    Science.gov (United States)

    Gueron, Shay; Seifert, Jean-Pierre

    Virtualization based upon Virtual Machines is a central building block of Trusted Computing, and it is believed to offer isolation and confinement of privileged instructions among other security benefits. However, it is not necessarily bullet-proof — some recent publications have shown that Virtual Machine technology could potentially allow the installation of undetectable malware root kits. As a result, it was suggested that such virtualization attacks could be mitigated by checking if a threatened system runs in a virtualized or in a native environment. This naturally raises the following problem: Can a program determine whether it is running in a virtualized environment, or in a native machine environment? We prove here that, under a classical VM model, this problem is not decidable. Further, although our result seems to be quite theoretic, we also show that it has practical implications on related virtualization problems.

  9. HENA CLOTHING FROM S K O P J E REGION O F MACEDONIA

    Directory of Open Access Journals (Sweden)

    Melek TUFAN

    2015-08-01

    Full Text Available Anatolian society provided cultural interaction greatly from Asia to Anatolia, from Anatolian to Europa and Africa with the historical improvment and the basic great culture provided by that history. Turkish people sent to Macedonia from interior parts of Anatolia for the r purpose of adopting there, carried their own culture, constructed close relation ship with local people and they enabled to comeinto variety of practice especially with the interaction of Turksh culture and their own culture. After the cultural interaction, Turkish emigrants lernt the Macedonian traditional clothes and the techniques used for sewing and making clothes and they had the first examples of that way of wearing. The differances and specialities taking place in that fashion became the most special heritage of that society. The clothes worn in special events gave information about the people who had them. In the study the purpose was to examine some women clothing samples worn at henanights in Üsküp Region in terms of materials, color, cut, sewing and decorating and help carrying it tonext generations.

  10. Radiation protection. Clothing for protection against radioactive contamination. Design, selection, testing and use

    International Nuclear Information System (INIS)

    1987-09-01

    The present Standard gives the characteristics of clothing protecting the wearer against radioactive contamination brought about by contact with liquid or solid substances or by atmospheric pollutants, such as solid particles, mist, gases or vapours. The Standard applies to two types of clothing: firstly, ventilated-pressurized garments; secondly, unventilated-unpressurized garments. A test method according to which any new type of garment can be assigned a protection factor that makes it easier for the user to make a choice is described. The report also gives methods for measuring leak-tightness and air supply flow rates of ventilated-pressurized garments. For guidance purposes only, recommendations for choosing protective clothing are given. 5 figs, 2 tabs [fr

  11. Nitroimidazoles adsorption on activated carbon cloth from aqueous solution.

    Science.gov (United States)

    Ocampo-Pérez, R; Orellana-Garcia, F; Sánchez-Polo, M; Rivera-Utrilla, J; Velo-Gala, I; López-Ramón, M V; Alvarez-Merino, M A

    2013-07-01

    The objective of this study was to analyze the equilibrium and adsorption kinetics of nitroimidazoles on activated carbon cloth (ACC), determining the main interactions responsible for the adsorption process and the diffusion mechanism of these compounds on this material. The influence of the different operational variables, such as ionic strength, pH, temperature, and type of water (ultrapure, surface, and waste), was also studied. The results obtained show that the ACC has a high capacity to adsorb nitroimidazoles in aqueous solution. Electrostatic interactions play an important role at pHpH values. Modifications of the ACC with NH3, K2S2O8, and O3 demonstrated that its surface chemistry plays a predominant role in nitroimidazole adsorption on this material. The adsorption capacity of ACC is considerably high in surface waters and reduced in urban wastewater, due to the levels of alkalinity and dissolved organic matter present in the different types of water. Finally, the results of applying kinetic models revealed that the global adsorption rate of dimetridazole and metronidazole is controlled by intraparticle diffusion. Copyright © 2013 Elsevier Inc. All rights reserved.

  12. Virtual goods recommendations in virtual worlds.

    Science.gov (United States)

    Chen, Kuan-Yu; Liao, Hsiu-Yu; Chen, Jyun-Hung; Liu, Duen-Ren

    2015-01-01

    Virtual worlds (VWs) are computer-simulated environments which allow users to create their own virtual character as an avatar. With the rapidly growing user volume in VWs, platform providers launch virtual goods in haste and stampede users to increase sales revenue. However, the rapidity of development incurs virtual unrelated items which will be difficult to remarket. It not only wastes virtual global companies' intelligence resources, but also makes it difficult for users to find suitable virtual goods fit for their virtual home in daily virtual life. In the VWs, users decorate their houses, visit others' homes, create families, host parties, and so forth. Users establish their social life circles through these activities. This research proposes a novel virtual goods recommendation method based on these social interactions. The contact strength and contact influence result from interactions with social neighbors and influence users' buying intention. Our research highlights the importance of social interactions in virtual goods recommendation. The experiment's data were retrieved from an online VW platform, and the results show that the proposed method, considering social interactions and social life circle, has better performance than existing recommendation methods.

  13. Immersion enthalpies of activated carbon cloths as physical chemistry characterization parameter

    International Nuclear Information System (INIS)

    Rodriguez, Giovanny; Giraldo, Liliana; Moreno Juan Carlos

    2009-01-01

    The immersion enthalpies of five activated carbon cloths in carbon, CCl 4 , H 2 O and NaOH and HCl 0.1 M solutions are determined. The surface area values of the cloths are between 243 and 848 m 2 g-1 and exhibit a linear relationship with the immersion enthalpies in CCl 4 . The immersion enthalpies of carbon cloths are between 5.49 and 42.3 Jg-1 for CCl 4 and 3.83 and 7.54 Jg-1 for H 2 O. The immersion enthalpies in the solutions are related to the contents of acidic and basic groups and find that in the first case to increase the immersion enthalpy in NaOH increases the total acidity. Hydrophobic factor is calculated from the immersion enthalpies in CCl 4 and H 2 O, that indicate the interaction with polar and a polar compounds, and also relates to pHPZC each sample.

  14. Codec-on-Demand Based on User-Level Virtualization

    Science.gov (United States)

    Zhang, Youhui; Zheng, Weimin

    At work, at home, and in some public places, a desktop PC is usually available nowadays. Therefore, it is important for users to be able to play various videos on different PCs smoothly, but the diversity of codec types complicates the situation. Although some mainstream media players can try to download the needed codec automatically, this may fail for average users because installing the codec usually requires administrator privileges to complete, while the user may not be the owner of the PC. We believe an ideal solution should work without users' intervention, and need no special privileges. This paper proposes such a user-friendly, program-transparent solution for Windows-based media players. It runs the media player in a user-mode virtualization environment, and then downloads the needed codec on-the-fly. Because of API (Application Programming Interface) interception, some resource-accessing API calls from the player will be redirected to the downloaded codec resources. Then from the viewpoint of the player, the necessary codec exists locally and it can handle the video smoothly, although neither system registry nor system folders was modified during this process. Besides convenience, the principle of least privilege is maintained and the host system is left clean. This paper completely analyzes the technical issues and presents such a prototype which can work with DirectShow-compatible players. Performance tests show that the overhead is negligible. Moreover, our solution conforms to the Software-As-A-Service (SaaS) mode, which is very promising in the Internet era.

  15. Architecture of Gothic Period and Its Effect to Clothing Design

    Directory of Open Access Journals (Sweden)

    Şerife YILDIZ

    2015-08-01

    Full Text Available Root of the word Gothic comes from a German tribe which lives in region of the Gotland of Scandinavia. Gothic period is a movement which ends the Midde Age and opens Renaissance. Alth ough seen in all branches of the art, Gothic is widely a style of architecture. Having been originated from the Roman architecture, Gothic Architecture come out in the second half of the 12th century and continued its existence until the half of the 16th c entury when classical architecture come out. In Europe, Gothic painting, sculpture and architecture were dominant and preserved its popularity until the Renaissance. Fashion means all the temporary new styles which come out in a certain period of time with the desires of dressing up, being different, wearing the most desirable. Although seen as two different design field, when we examine closely, we can see that fashion and architecture has many common point from the past to present. As man is the common po int of this two field, they naturally affect each other. Gothic architecture inspired clothing designs, which is enough to show how much they affected each other. In this study, our purpose is to reveal effects of the Gothic architecture on the clothing d esigns. The style used in the Gothic period architecture and models and styles in clothing designs was presented with the help of table of specification. According to this, both fields' sharing common aesthetic concern and same theoritic and ideologic bas e was accompanied by stylistic and structural similarities accordingly. Designers in this two different fields turned even to themselves for inspiration and technical strategy. Environmental and cultural factors affect both fashion designers and architects . When seen as a part of historical process, clothes and buildings with their important cultural and economic conditions are priceless anthropological buildings which show technological developments within the period.

  16. Body Image, self-esteem, and clothing of men and women aged 55 years and older

    OpenAIRE

    Hwang, Jinsook

    1993-01-01

    Although there are many studies regarding body image of younger people, there have been few studies on that of older people. Since today's culture considers the young, thin body image ideal, it is important to investigate body image of older people and the relationships between their body image, self esteem, and clothing behavior. The purpose of this study was to determine the relationships between 1) body-cathexis and self-esteem, 2) body-cathexis and clothing behavio...

  17. Personal protective clothing against accidental immersion

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, David; Tipton, Michael [Surrey Univ., Robens Inst. of Health and Safety, Guildford (United Kingdom)

    1997-12-31

    The requirements for protective clothing against accidental immersion are discussed and the advantages and limitations of the main types of immersion protection available are analysed. The variety of designs available reflects the various circumstances under which they may be used. In broad terms in the offshore industry these include the following activities: normal work without risk of immersion but with a possible need to abandon the rig or ship; work in areas where there is risk of accidentally falling into the sea; flying over the sea in a helicopter. The first response to sudden immersion in sea water, which must usually be considered to be cold, is a sudden gasp often followed by an immediate phase of uncontrolled breathing. Since control of ones breathing between and under the breaking waves is essential to staying alive, this is a critical time. After surviving this initial ``cold shock`` phase, the effects of body heat loss become hazardous. Protection against hypothermia has been the priority for those providing survival suits and protective clothing while the hazard of the immediate response to cold immersion has been unrecognised to a large extent. (UK)

  18. Holland Code, Job Satisfaction and Productivity in Clothing Factory Workers.

    Science.gov (United States)

    Heesacker, Martin; And Others

    Published research on vocational interests and personality has not often assessed the characteristics of workers and the work environment in blue-collar, women-dominated industries. This study administered the Self-Directed Search (Form E) to 318 sewing machine operators in three clothing factories. Holland codes, productivity, job satisfaction,…

  19. Synergistic Extraction of Lactic Acid with Tri-n-Octylamine and Try-n-Butylphosphate

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, Michiaki.; Yuba, Seiji.; Kondo, Kazuo. (Doshisha University, Department of Chemical Engineering and Materials Science (Japan))

    1998-12-01

    Synergistic extraction system of lactic acid is examined to develop to in situ extractive fermentation process. The addition of try-n-butyl phosphate(TBP) to the extraction system of lactic acid(HA) with tri-n-actylamine(TOA) diluted by hexane causes a large synergism. Extraction reaction with the mixed extractant is interpreted quite well based on the formation of mixed complex, HA[center dot]TOA[center dot]2TBP. Though the addition of hexane solution containing TBP and TOA to the culture of Lactobacillus rhamnosus results in low lactate production, some lactate is produced. (author)

  20. Synergistic Extraction of Lactic Acid with Tri-n-Octylamine and Try-n-Butylphosphate

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, Michiaki.; Yuba, Seiji.; Kondo, Kazuo. [Doshisha University, Department of Chemical Engineering and Materials Science (Japan)

    1998-12-01

    Synergistic extraction system of lactic acid is examined to develop to in situ extractive fermentation process. The addition of try-n-butyl phosphate(TBP) to the extraction system of lactic acid(HA) with tri-n-actylamine(TOA) diluted by hexane causes a large synergism. Extraction reaction with the mixed extractant is interpreted quite well based on the formation of mixed complex, HA{center_dot}TOA{center_dot}2TBP. Though the addition of hexane solution containing TBP and TOA to the culture of Lactobacillus rhamnosus results in low lactate production, some lactate is produced. (author)

  1. Try and try again--qualitative insights into adolescent smoking experimentation and notions of addiction.

    Science.gov (United States)

    Leavy, Justine; Wood, Lisa; Phillips, Fiona; Rosenberg, Michael

    2010-12-01

    addiction is a relatively unexplored issue in youth tobacco control. Increasingly, there is recognition of addiction experiences in regular and irregular teenage smokers. Research was undertaken on behalf of the Smarter than Smoking (STS) project to probe young people's reasons for smoking uptake, their attitudes towards the social acceptability of smoking, predictors of continued smoking after trial and understandings and perceptions of addiction. twenty focus groups were conducted to collect qualitative data from young people (n=92) aged 13 to 15 years from metropolitan and regional areas of Western Australia (WA), from a variety of socioeconomic backgrounds, including young Aboriginal and Torres Strait Islander people. of the young people spoken to, 20% smoked regularly, 40% had tried smoking and 40% had never tried. Acceptability and normalcy of trialling smoking was a recurring theme, with little perceived risk of trial leading to regular smoking or becoming addicted. Even non-smokers accepted 'just having a try' in the context of curiosity, life experiences and 'informed choice'. preventing continuation after trial of smoking among young people needs to increase in importance, given the prevailing norms around 'trying it' and individual choice.

  2. Tri-Cities Index of Innovation and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, Richard A.; Scott, Michael J.; Butner, Ryan S.

    2011-01-17

    In 2001 and 2004, the Economic Development Office of Pacific Northwest National Laboratory published companion reports to the Washington Technology Center Index studies that provided additional information on the Tri-Cities (Kennewick-Richland-Pasco) area of the state, its technology businesses, and important advantages that the Tri-Cities have as places to live and do business. These reports also compared the Tri-Cities area to other technology-based metropolitan areas in the Pacific Northwest and nation along critical dimensions known to be important to technology firms. This report updates the material in these earlier reports, and highlights a growing Tri-Cities metropolitan area.

  3. Typology on Leadership toward Creativity in Virtual Work

    Directory of Open Access Journals (Sweden)

    Iris A Humala

    2017-07-01

    Full Text Available Aim/Purpose: This study aims to develop a descriptive typology to better identify leadership toward creativity in virtual work in different types of companies. Background: The study empirically explores how leadership toward creativity occurs in virtual work and uses the theoretical lenses of creativity-conducive leadership and heterarchy to generate a typology. Methodology\t: A multiple qualitative case study design, interpretivist approach, and abductive analysis are applied. Data is collected by interviewing 21 leaders and employees face-to-face in four companies in the ICT sector and one business advisor company. Contribution: The empirical evidence of this study enriches the understanding of leadership toward creativity in virtual work and contributes to the limited empirical knowledge on leadership that stimulates a virtual workforce to achieve creativity. Findings: The four different types of companies in the typology utilize various transitions toward leadership creativity in virtual work. The trend in leadership in the existing virtually networked business environment is toward the “collective mind” company, which is characterized by shared values, meaningful work, collective intelligence, conscious reflection, transparency, coaching, empowering leadership by example, effective multichannel interaction, and assertiveness. The findings empirically support applying a heterarchy perspective to lead a virtual workforce toward creativity and promote leaders who are genuinely interested in people, their development, collaboration, and technology. Recommendations for Practitioners: The typology helps professionals realize the need to develop leadership, communication, interaction, learning, and growth to foster creative interaction and improve productivity and competitiveness. Recommendation for Researchers: This study enables researchers to more rigorously and creatively conceptualize the conditions and relationships in leadership that

  4. Report on achievements of research and development of an automatic sewing system in fiscal 1985. Cloth handling technology; 1985 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-03-01

    This paper describes the cloth handling technology, extracted from the achievement report for fiscal 1985 on developing an automatic sewing system. Development, experiment and evaluation were made on prototype cloth holding modules of vertical type and horizontal type. For a cloth operation type module, a principle model was developed. The cloth holding technology has a number of problems to be solved in the future, including systematization and application conditions of the holding devices. In improving the function of sewing process positioning, problems in devices were extracted, and functions to be added were put in order. Basics of the concept for the pressing process positioning was made clear, examples of the process layout drawings were prepared, and weights by processes were measured and put in order to discuss the holding force. The handler was given redundancy, and constructed with seven shafts to make it capable of avoiding obstacles, thereby having reduced the weight and size by 15%. The calculation operating time in a servo control module was shortened. The basic design was completed on the specifications for a coordinated operation control system. Discussions were given on functions and specifications of different constituting modules as a study on formation of the system to transport flexible cloths. (NEDO)

  5. Emergence of Virtual Communities as Means of Communication: A Case Study on Virtual Health Care Communities

    Science.gov (United States)

    Argan, Mehpare Tokay; Argan, Metin; Suher, Idil K.

    2011-01-01

    Like in all areas, virtual communities make their presence felt in the area of healthcare too. Virtual communities play an important role in healthcare in terms of gathering information on healthcare, sharing of personal interests and providing social support. Virtual communities provide a way for a group of peers to communicate with each other.…

  6. ADHD: Tips to Try

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español ADHD: Tips to Try KidsHealth / For Teens / ADHD: Tips to Try Print en español TDAH: Consejos que puedes probar ADHD , short for attention deficit hyperactivity disorder , is a ...

  7. An investigation of the tri-bar gripping system on isometric muscular endurance.

    Science.gov (United States)

    Drury, Daniel G; Faggiono, Heath; Stuempfle, Kristin J

    2004-11-01

    Recently, a new product called the Tri-Bar has been introduced as an alternative to the standard round weightlifting bar. The Tri-Bar has the same weight, length, and circumference as a standard weightlifting bar and differs only in that the shape of the bar is formed like a triangle with rounded edges. Theoretically, the shape of the bar will enhance gripping comfort and increase muscular endurance. We studied 32 moderately trained males who were free from upper-body injury or limitation. Each participant completed 4 visits to the lab as part of 2 separate investigations. The first investigation was a comparison of straight-arm hang times while grasping a standard Olympic bar or a Tri-Bar attached to the top of a power rack. The second investigation involved grasping a standard revolving cable handle or a Tri-Bar revolving handle attached to a weight equal to half the subject's body weight. In both investigations, time was used as a measure of isometric muscular endurance. Differences were determined using a dependent t-test, and a level of significance was set at p < 0.05. Mean hang times were significantly longer when the men hung from the Tri-Bar (107.6 seconds) versus the standard bar (95.4 seconds) (p = 0.015). Conversely, in the investigation using the revolving handles, the round bar produced longer grasping times (71.5 seconds) than the Tri-Bar (62.6 seconds) (p = 0.000). The results of this investigation indicate that a fixed and stable Tri-Bar may help to increase hang time, but a Tri-Bar free to rotate within the grasp may decrease grasping time in comparison to a standard round handle. With regard to exercises that require isometric grasping, the Tri-Bar may be an effective alternative to the standard bar for increasing isometric grasping endurance.

  8. Quantitative measurement of aerosol deposition on skin, hair and clothing for dosimetric assessment. Final report

    DEFF Research Database (Denmark)

    Fogh, C.L.; Byrne, M.A.; Andersson, Kasper Grann

    1999-01-01

    the deposition and subsequent fate of contaminant aerosol on skin, hair and clothing. The main technique applied involves the release and subsequent deposition on volunteers in test rooms of particles of differentsizes labelled with neutron activatable rare earth tracers. Experiments indicate that the deposition...... of magnitudeas the gamma doses received over the first year from contamination on outdoor surfaces. According to the calculations, beta doses from skin deposition to individuals in areas of Russia, where dry deposition of Chernobyl fallout led to very high levels ofcontamination, may have amounted to several...

  9. 76 FR 50145 - Energy Conservation Program: Test Procedures for Residential Clothes Dryers

    Science.gov (United States)

    2011-08-12

    ... standby mode and off mode power use for those products; and (2) adopted several amendments to the clothes...-BT-STD-0010. DOE requests information and data on consumer usage habits regarding cycles selected for...

  10. Three distinct surgical clothing systems in a turbulent mixing operating room equipped with mobile ultraclean laminar airflow screen

    DEFF Research Database (Denmark)

    Sadrizadeh, Sasan; Holmberg, Sture; Nielsen, Peter Vilhelm

    2016-01-01

    on the operating and instrument tables with and without the additional mobile airflow screen. Three different source strengths (the mean bacteria-carrying particle value emitted from one person per second) due to staff clothing variety were considered. Model validation was performed through result comparisons...... a clothing system with high protective capacity reduced particle concentration....

  11. 78 FR 35875 - Proposed Extension of Approval of Information Collection; Comment Request: Clothing Textiles...

    Science.gov (United States)

    2013-06-14

    ... Information Collection; Comment Request: Clothing Textiles, Vinyl Plastic Film AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: As required by the Paperwork Reduction Act of 1995 (44 U.S.C. chapter 35... Clothing Textiles (16 CFR part 1610) and the Standard for the Flammability of Vinyl Plastic Film (16 CFR...

  12. Change Processes and Future Perspectives in the Knowledge Society. The Example of Clothing and Textile Industry

    OpenAIRE

    Tobias Woll

    2006-01-01

    The paper examines change processes und future perspectives in the knowledge society. It presents the clothing and textile industry as an example for a transforming industry in a global economy. The paper reviews existing future studies, which have surveyed change processes and future developments in the clothing and textile industry. Main goals of the review are the identification of changes in work and the description of the restructuring of global value chains within the clothing and texti...

  13. Virtual and augmented reality for training on maintenance

    International Nuclear Information System (INIS)

    Gonzalez, F.

    2001-01-01

    This paper presents two projects focused to support training on maintenance using new technologies. Both projects aims at specifying. designing, developing, and demonstrating prototypes allowing computer guided maintenance of complex mechanical elements using Virtual Reality (VIRMAN) and Augmented Reality (STARMATE) techniques. VIRMAN project is dedicated to training course development on maintenance using Virtual Reality. It based in the animation of three dimension images for component assembly/de-assembly or equipment movements. STARMATE will rely on Augmented Reality techniques which is a growing area in virtual Reality research. The idea of Augmented Reality is to combine a real scene, viewed by the user, with a virtual scene generated by a computer augmenting the reality with additional information. (Author)

  14. EMERGENCE OF VIRTUAL COMMUNITIES AS MEANS OF COMMUNICATION: A Case Study On Virtual Health Care Communities

    Directory of Open Access Journals (Sweden)

    Mehpare Tokay ARGAN

    2011-07-01

    Full Text Available Today, like in all areas, the Internet has had an important effect in the area of health as well. With the development of the Internet many new and different applications have developed and one of the most important of these are probably virtual communities. Virtual communities, which are used as a tool for providing information and word of mouth communication, have become a widely used marketing tool in the area of healthcare services in recent years. A virtual community is a group that does not depend on space and time to maintain ties or participation in the group whose members share the same interest and to maintain closeness, that is based on internet communications and whose membership is based on free will. In these kinds of communities whose services are provided on a membership basis, health services of various kinds are offered to the members. In virtual communities, virtual interactive communications established between the members can be an important determining factor when choosing a product, service or doctor.

  15. On I/O Virtualization Management

    Science.gov (United States)

    Danciu, Vitalian A.; Metzker, Martin G.

    The quick adoption of virtualization technology in general and the advent of the Cloud business model entail new requirements on the structure and the configuration of back-end I/O systems. Several approaches to virtualization of I/O links are being introduced, which aim at implementing a more flexible I/O channel configuration without compromising performance. While previously the management of I/O devices could be limited to basic technical requirments (e.g. the establishment and termination of fixed-point links), the additional flexibility carries in its wake additional management requirements on the representation and control of I/O sub-systems.

  16. Reducing the risk of surgical site infection: a case controlled study of contamination of theatre clothing.

    Science.gov (United States)

    Sivanandan, Indu; Bowker, Karen E; Bannister, Gordon C; Soar, Jasmeet

    2011-02-01

    Surgical site infections are one of the most important causes of healthcare associated infections (HCAI), accounting for 20% of all HCAIs. Surgical site infections affect 1% of joint replacement operations. This study was designed to assess whether theatre clothing is contaminated more inside or outside the theatre suite. Petri dishes filled with horse blood agar were pressed on theatre clothes at 0, 2, 4, 6 and 8 hours to sample bacterial contamination in 20 doctors whilst working in and outside the theatre suite. The results showed that there was greater bacterial contamination when outside the theatre suite at 2 hours. There were no differences in the amount of contamination at 4, 6 and 8 hours. This study suggests that the level of contamination of theatre clothes is similar both inside and outside the theatre setting.

  17. Synthesis, Structural, Viscosimetric, And Rheological Study, of A New Trifunctional Phosphorus Epoxyde Prepolymer , Tri-Glycidyl Ether Tri-Mercaptoethanol Of Phosphore (TGETMEP

    Directory of Open Access Journals (Sweden)

    Atiqa Bekhta

    2016-10-01

    Full Text Available The aim of our work is to synthesize a new phosphorus tri-functional epoxy resin tri-glycidyl ether tri-mercaptoethanol of phosphorus (TGETMEP in two stages. In the first stage, we got the precursor molecule of the epoxy matrix tri-mercaptoethanol phosphate (METR. The second step led us to the synthesis of tri-functional resin TMEP condensation with epichlorohydrin. The standard TGETMEP resin was characterized by the Fourier infrared transformation (FTIR and nuclear magnetic resonance (NMR, on one hand. The viscosimetric analysis was investigated by the Hebbelod capillary viscometer and rheometer Rheomat 01, on the other hand. The cross-linked resins and tertiary formulated composites have been studied by the rheometer 01 which was observed by means of SEM.

  18. Changing Value Chain Strategies of Danish Clothing and Fashion Companies, 1970-2013

    DEFF Research Database (Denmark)

    Jensen, Kristoffer; Taudal Poulsen, René

    2013-01-01

    Over the last four decades, the clothing industry has seen one of the most radical, global transformations of any industry, and Western European clothing companies have been put under strain. To the surprise of industry observers and academics, however, Denmark continues to hold expansive and pro...... of new companies entering the sector rather than the transformation of old ones. The article demonstrates that value chain strategies are constantly in the making and successful ones rarely remain competitive for long....

  19. Spontane strategier i innovationsnetværk: materialitetens betydning for stabiliseringen af virtuelle verdner som professionelt kommunikationsmedie [Spontaneous strategies in innovation networks: The importance of materiality in stabilising virtual worlds

    Directory of Open Access Journals (Sweden)

    Emil Husted

    2012-09-01

    Full Text Available Much research has dealt with how social and organisational processes change when they take place in virtual spaces. This article considers innovation processes in which actors try to establish virtual worlds as platforms for professional communication. However, instead of focusing on internal communication processes in virtual worlds, the article seeks to question the dichotomy between physical and virtual worlds and to explore the importance of materiality in organising the virtual. Adopting a perspective inspired by actor-network theory, the article argues that physical places and objects do not only serve as context for innovation processes, but on the contrary are incorporated as strategic resources that actively help create the virtual worlds. The article is based on an empirical analysis of five Danish companies, and shows how companies make use of physical places and objects as strategic resources in the innovation process. Thus the article contributes to the literature on innovation in new media such as virtual worlds.

  20. ‘What to wear?’: Clothing as an example of expression and intentionality

    Directory of Open Access Journals (Sweden)

    Ian W. KING

    2015-06-01

    Full Text Available I will argue here that for many of us the act of dressing our bodies is evidence of intentional expression before different audiences. It is important to appreciate that intentionality enables us to understand how and why we act the way we do. The novel (and potentially significant contribution this paper makes to this examination is employing clothing as a means of revealing the characteristics of intentionality. In that, it is rare to identify one exemplar that successfully captures the relationships between the cognitive and physical characteristics of its application. Nevertheless, this paper will not attempt to fully encompass the traditional approaches associated with this concept but instead employ both the early and later writings of French phenomenologist Maurice Merleau‑Ponty and his claim that our lived bodies are an expressive space from which we act intentionally. In other words (and this is critical for the approach of this paper, that the manner by which we dress our bodies is likely to offer a significant means of revealing the character of intentionality in everyday life and by this, claim that clothing can communicate. Accordingly, this first‑person account closely examines both the cognitive and physical experience of a simple clothing example: ‘what to wear?’ and the experience of an everyday clothing purchase in a store and its subsequent impact when the item of clothing is worn for different audiences. The ensuing discussion systematically examines the significance of marrying Merleau‑Ponty’s writings with this everyday example through private and public audiences and in abstract and public spaces.