Observation of enhanced electric field in an RF-plugged sheet plasma in the RFC-XX-M open-ended machine

International Nuclear Information System (INIS)

Oda, T.; Takiyama, K.; Kadota, K.

1987-12-01

We report nonperturbing observation of the electric field in the sheet plasma for RF end-plugging on the RFC XX-M open-ended machine by using the Stark effect with a combined technique of beam-probe and laser-induced fluorescence. Under the optimum condition for the RF plugging, enhanced electric field is found in the sheet plasma by about 2.5 times with respect to the electric field when no plasma is produced. The field spatial profile is also measured, which is discussed in connection with the electrostatic eigenmode. (author)

77 FR 70483 - Request for Comments (RFC)-Federal Cybersecurity Research and Development Strategic Plan

Science.gov (United States)

2012-11-26

... received by December 19, 2012. SUMMARY: This Request For Comments (RFC) is issued by the Cyber Security and... plan was developed under the leadership of the Cyber Security and Information Assurance Research and... strategic plan, the strategic plan's impact in orienting private sector cybersecurity research and...

RFC-1 80G>A polymorphism in case-mother/control-mother dyads is associated with risk of nephroblastoma and neuroblastoma.

Science.gov (United States)

Montalvão-de-Azevedo, Rafaela; Vasconcelos, Gisele M; Vargas, Fernando R; Thuler, Luiz Claudio; Pombo-de-Oliveira, Maria S; de Camargo, Beatriz

2015-02-01

Embryonic tumors are associated with an interruption during normal organ development; they may be related to disturbances in the folate pathway involved in DNA synthesis, methylation, and repair. Prenatal supplementation with folic acid is associated with a decreased risk of neuroblastoma, brain tumors, retinoblastoma, and nephroblastoma. The aim of this study was to investigate the association between MTHFR rs1801133 (C677T) and RFC-1 rs1051266 (G80A) genotypes with the risk of developing nephroblastoma and neuroblastoma. Case-mother/control-mother dyad study. Samples from Brazilian children with nephroblastoma (n=80), neuroblastoma (n=66), healthy controls (n=453), and their mothers (case n=93; control n=75) were analyzed. Genomic DNA was isolated from peripheral blood cells and/or buccal cells and genotyped to identify MTHFR C677T and RFC-1 G80A polymorphisms. Differences in genotype distribution between patients and controls were tested by multiple logistic regression analysis. Risk for nephroblastoma and neuroblastoma was two- to fourfold increased among children with RFC-1 polymorphisms. An increased four- to eightfold risk for neuroblastoma and nephroblastoma was seen when the child and maternal genotypes were combined. Our results suggest that mother and child RFC-1 G80A genotypes play a role on the risk of neuroblastoma and nephroblastoma since this polymorphism may impair the intracellular levels of folate, through carrying fewer folate molecules to the cell interior, and thus, the intracellular concentration is not enough to maintain regular DNA synthesis and methylation pathways.

A Pilot Study Evaluating the Contribution of SLC19A1 (RFC-1 80G>A Polymorphism to Alzheimer’s Disease in Italian Caucasians

Directory of Open Access Journals (Sweden)

Fabio Coppedè

2014-01-01

Full Text Available Alzheimer’s disease (AD is the most common neurodegenerative disorder and the primary form of dementia in the elderly. Polymorphisms of genes involved in folate metabolism have been frequently suggested as risk factors for sporadic AD. A common c.80G>A polymorphism (rs1051266 in the gene coding for the reduced folate carrier (SLC19A1 gene, commonly known as RFC-1 gene was investigated as AD risk factor in Asian populations, yielding conflicting results. We screened a Caucasian population of Italian origin composed of 192 sporadic AD patients and 186 healthy matched controls, for the presence of the RFC-1 c.80G>A polymorphism, and searched for correlation with circulating levels of folate, homocysteine, and vitamin B12. No difference in the distribution of allele and genotype frequencies was observed between AD patients and controls. No correlation was observed among the genotypes generated by the RFC-1 c.80G>A polymorphism and circulating levels of folate, homocysteine, and vitamin B12 either in the whole cohort of subjects or after stratification into clinical subtypes. Present results do not support a role for the RFC-1 c.80G>A polymorphism as independent risk factor for sporadic AD in Italian Caucasians.

Volatile Flavor Compounds Produced by Molds of Aspergillus, Penicillium, and Fungi imperfecti.

Science.gov (United States)

Kaminski, E; Stawicki, S; Wasowicz, E

1974-06-01

Strains of molds Aspergillus niger, A. ochraceus, A. oryzae, A. parasiticus, Penicillium chrysogenum, P. citrinum, P. funiculosum, P. raistrickii, P. viridicatum, Alternaria, Cephalosporium, and Fusarium sp. were grown on sterile coarse wheat meal at 26 to 28 C for 120 h. The volatiles from mature cultures were distilled at low temperature under reduced pressure. The distillates from traps -40 and -78 C were extracted with methylene chloride and subsequently concentrated. All the concentrates thus obtained were analyzed by gas-liquid chromatography, mass spectrometry, chemical reactions of functional groups, and olfactory evaluation. Six components detected in the culture distillates were identified positively: 3-methylbutanol, 3-octanone, 3-octanol, 1-octen-3-ol, 1-octanol, and 2-octen-1-ol. They represented 67 to 97% of all the volatiles occurring in the concentrated distillate. The following 14 components were identified tentatively: octane, isobutyl alcohol, butyl alcohol, butyl acetate, amyl acetate, octyl acetate, pyridine, hexanol, nonanone, dimethylpyrazine, tetramethylpyrazine, benzaldehyde, propylbenzene, and phenethyl alcohol. Among the volatiles produced by molds, 1-octen-3-ol yielding a characteristic fungal odor was found predominant.

The gene for replication factor C subunit 2 (RFC2) is within the 7q11.23 Williams syndrome deletion

Energy Technology Data Exchange (ETDEWEB)

Peoples, R.; Perez-Jurado, L.; Francke, U.; Yu-Ker Wang [Stanford Univ. Medical Center, CA (United States); Kaplan, P. [Children`s Hospital of Philadelphia, PA (United States)

1996-06-01

Williams syndrome (WS) is a developmental disorder with multiple system manifestations, including supraval var aortic stenosis (SVAS), peripheral pulmonic stenosis, connective tissue abnormalities, short stature, characteristic personality profile and cognitive deficits, and variable hypercalcemia in infancy. It is caused by heterozygosity for a chromosomal deletion of part of band 7q11.23 including the elastin locus (ELN). Since disruption of the ELN gene causes autosomal dominant SVAS, it is assumed that ELN haploinsufficiency is responsible for the cardiovascular features of WS. The deletion that extends from the ELN locus in both directions is {ge}200 kb in size, although estimates of {ge}2 Mb are suggested by high-resolution chromosome banding and physical mapping studies. We have searched for additional dosage-sensitive genes within the deletion that may be responsible for the noncardiovascular features. We report here that the gene for replication factor C subunit 2 (RFC2) maps within the WS deletion region and was found to be deleted in all of 18 WS patients studied. The protein product of RFC2 is part of a multimeric complex involved in DNA elongation during replication. 14 refs., 3 figs.

uvsF RFC1, the large subunit of replication factor C in Aspergillus nidulans, is essential for DNA replication, functions in UV repair and is upregulated in response to MMS-induced DNA damage.

Science.gov (United States)

Kafer, Etta; Chae, Suhn-Kee

2008-09-01

uvsF201 was the first highly UV-sensitive repair-defective mutation isolated in Aspergillus nidulans. It showed epistasis only with postreplication repair mutations, but caused lethal interactions with many other repair-defective strains. Unexpectedly, closest homology of uvsF was found to the large subunit of human DNA replication factor RFC that is essential for DNA replication. Sequencing of the uvsF201 region identified changes at two close base pairs and the corresponding amino acids in the 5'-region of uvsF(RFC1). This viable mutant represents a novel and possibly important type. Additional sequencing of the uvsF region confirmed a mitochondrial ribosomal protein gene, mrpA(L16), closely adjacent, head-to-head with a 0.2kb joint promoter region. MMS-induced transcription of both the genes, but especially uvsF(RFC1), providing evidence for a function in DNA damage response.

Deployment of 464XLAT (RFC6877) alongside IPv6-only CPU resources at WLCG sites

Science.gov (United States)

Froy, T. S.; Traynor, D. P.; Walker, C. J.

2017-10-01

IPv4 is now officially deprecated by the IETF. A significant amount of effort has already been expended by the HEPiX IPv6 Working Group on testing dual-stacked hosts and IPv6-only CPU resources. Dual-stack adds complexity and administrative overhead to sites that may already be starved of resource. This has resulted in a very slow uptake of IPv6 from WLCG sites. 464XLAT (RFC6877) is intended for IPv6 single-stack environments that require the ability to communicate with IPv4-only endpoints. This paper will present a deployment strategy for 464XLAT, operational experiences of using 464XLAT in production at a WLCG site and important information to consider prior to deploying 464XLAT.

Intelligent Advanced Communications IP Telephony Feasibility for the US Navy - Phase 3

Science.gov (United States)

2011-03-01

115 FIGURE 6-4 STATIC IPV4 ADDRESSING .......................................................................... 116 FIGURE 6-5 VOIP ACCOUNT...alternative types of network addresses (e.g., both IPv4 and IPv6) in SDP for a specific media session. 2.6.4.3 SIP Requests Related RFC 2976... History -Info”, to capture the history of requests from a UA that arrive at a particular application server or user. RFC 3420 – introduces a new

NASA Standard for Airborne Data: ICARTT Format ESDS-RFC-019

Science.gov (United States)

Thornhill, A.; Brown, C.; Aknan, A.; Crawford, J. H.; Chen, G.; Williams, E. J.

2011-12-01

Airborne field studies generate a plethora of data products in the effort to study atmospheric composition and processes. Data file formats for airborne field campaigns are designed to present data in an understandable and organized way to support collaboration and to document relevant and important meta data. The ICARTT file format was created to facilitate data management during the International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) campaign in 2004 that involved government-agencies and university participants from five countries. Since this mission the ICARTT format has been used in subsequent field campaigns such as Polar Study Using Aircraft Remote Sensing, Surface Measurements and Models of Climates, Chemistry, Aerosols, and Transport (POLARCAT) and the first phase of Deriving Information on Surface Conditions from COlumn and VERtically Resolved Observations Relevant to Air Quality (DISCOVER-AQ). The ICARTT file format has been endorsed as a standard format for airborne data by the Standard Process Group (SPG), one of the Earth Science Data Systems Working Groups (ESDSWG) in 2010. The detailed description of the ICARTT format can be found at http://www-air.larc.nasa.gov/missions/etc/ESDS-RFC-019-v1.00.pdf. The ICARTT data format is an ASCII, comma delimited format that was based on the NASA Ames and GTE file formats. The file header is detailed enough to fully describe the data for users outside of the instrument group and includes a description of the meta data. The ICARTT scanning tools, format structure, implementations, and examples will be presented.

Genotypic characterization of ESBL-producing E. coli from imported meat in South Korea.

Science.gov (United States)

Kim, Young-Jo; Moon, Jin-San; Oh, Deog-Hwan; Chon, Jung-Whan; Song, Bo-Ra; Lim, Jong-Su; Heo, Eun-Jeong; Park, Hyun-Jung; Wee, Sung-Hwan; Sung, Kidon

2018-05-01

Twenty extended-spectrum β-lactamase (ESBL)-producing E. coli strains were isolated from imported meat in South Korea. ESBL strains of E. coli were detected in chicken (14/20) more often than in pork (6/20) and beef (0/20); the highest number (12/20) was detected in Brazilian meats. The bla CTX-M genes were predominant in meats from many countries. E. coli from pork imported from France produced the bla CTX-M-58 enzyme, which has never been documented previously in ESBL-producing bacteria from clinical or environmental sources. Additionally, the coexistence of the bla CTX-M-2 and bla OXA-1 enzymes in EC12-5 isolate was found for the first time in an ESBL E. coli isolate. A rare bla CTX-M type, bla CTX-M-25 , was found in 40% of ESBL E. coli isolates. Phenotypic susceptibility testing showed that E. coli isolates were resistant to up to eleven antibiotics, including ciprofloxacin. For the first time, a new combination in an integron gene cassette, aacA4-cmlA6-qacEΔ1, was found in an E. coli isolate from poultry imported from Brazil. Three E. coli ST117 isolates, from an avian pathogenic lineage producing CTX-M-94, harbored fimH, fyuA, iutA, papC, rfc, and traT virulence genes and were not susceptible to quinolones. For the first time, rfc and papG virulence factors were detected in ESBL E. coli strains isolated from meat products. Even though E. coli CC21 and CC22 were obtained from meats from the USA and Brazil, respectively, they had a similarity coefficient higher than 99% in rep-PCR and the same MLST type (ST117), phenotypic antibiotic resistance pattern, integron gene (qacEΔ1), and plasmid DNA profile. This study indicates that imported meat products may be a source of ESBL-producing E. coli strains in South Korea. Published by Elsevier Ltd.

Field reversal experiments (FRX). [Equilibrium, confinement, and stability

Energy Technology Data Exchange (ETDEWEB)

Linford, R.K.; Armstrong, W.T.; Platts, D.A.; Sherwood, E.G.

1978-01-01

The equilibrium, confinement, and stability properties of the reversed-field configuration (RFC) are being studied in two theta-pinch facilities. The RFC is an elongated toroidal plasma confined in a purely poloidal field geometry. The open field lines of the linear theta pinch support the closed-field RFC much like the vertical field centers the toroidal plasma in a tokamak. Depending on stability and confinement properties, the RFC might be used to greatly reduce the axial losses in linear fusion devices such as mirrors, theta pinches, and liners. The FRX systems produce RFC's with a major radius R = 2-6 cm, minor radius a approximately 2 cm, and a total length l approximately 35 cm. The observed temperatures are T/sub e/ approximately 100 eV and T/sub i/ = 150-350 eV with a peak density n approximately 2 x 10/sup 15/ cm/sup -3/. After the plasma reaches equilibrium, the RFC remains stable for up to 30 ..mu..s followed by the rapid growth of the rotational m = 2 instability, which terminates the confinement. During the stable equilibrium, the particle and energy confinement times are more than 10 times longer than in an open-field system. The behavior of the m = 2 mode qualitatively agrees with the theoretically predicted instability for rotational velocities exceeding some critical value.

Field reversal experiments (FRX)

International Nuclear Information System (INIS)

Linford, R.K.; Armstrong, W.T.; Platts, D.A.; Sherwood, E.G.

1978-01-01

The equilibrium, confinement, and stability properties of the reversed-field configuration (RFC) are being studied in two theta-pinch facilities. The RFC is an elongated toroidal plasma confined in a purely poloidal field geometry. The open field lines of the linear theta pinch support the closed-field RFC much like the vertical field centers the toroidal plasma in a tokamak. Depending on stability and confinement properties, the RFC might be used to greatly reduce the axial losses in linear fusion devices such as mirrors, theta pinches, and liners. The FRX systems produce RFC's with a major radius R = 2-6 cm, minor radius a approximately 2 cm, and a total length l approximately 35 cm. The observed temperatures are T/sub e/ approximately 100 eV and T/sub i/ = 150-350 eV with a peak density n approximately 2 x 10 15 cm -3 . After the plasma reaches equilibrium, the RFC remains stable for up to 30 μs followed by the rapid growth of the rotational m = 2 instability, which terminates the confinement. During the stable equilibrium, the particle and energy confinement times are more than 10 times longer than in an open-field system. The behavior of the m = 2 mode qualitatively agrees with the theoretically predicted instability for rotational velocities exceeding some critical value

The application of GBS markers for extending the dense genetic map of rye (Secale cereale L.) and the localization of the Rfc1 gene restoring male fertility in plants with the C source of sterility-inducing cytoplasm.

Science.gov (United States)

Milczarski, Paweł; Hanek, Monika; Tyrka, Mirosław; Stojałowski, Stefan

2016-11-01

Genotyping by sequencing (GBS) is an efficient method of genotyping in numerous plant species. One of the crucial steps toward the application of GBS markers in crop improvement is anchoring them on particular chromosomes. In rye (Secale cereale L.), chromosomal localization of GBS markers has not yet been reported. In this paper, the application of GBS markers generated by the DArTseq platform for extending the high-density map of rye is presented. Additionally, their application is used for the localization of the Rfc1 gene that restores male fertility in plants with the C source of sterility-inducing cytoplasm. The total number of markers anchored on the current version of the map is 19,081, of which 18,132 were obtained from the DArTseq platform. Numerous markers co-segregated within the studied mapping population, so, finally, only 3397 unique positions were located on the map of all seven rye chromosomes. The total length of the map is 1593 cM and the average distance between markers is 0.47 cM. In spite of the resolution of the map being not very high, it should be a useful tool for further studies of the Secale cereale genome because of the presence on this map of numerous GBS markers anchored for the first time on rye chromosomes. The Rfc1 gene was located on high-density maps of the long arm of the 4R chromosome obtained for two mapping populations. Genetic maps were composed of DArT, DArTseq, and PCR-based markers. Consistent mapping results were obtained and DArTs tightly linked to the Rfc1 gene were successfully applied for the development of six new PCR-based markers useful in marker-assisted selection.

Field reversal experiments (FRX)

International Nuclear Information System (INIS)

Linford, R.K.; Armstrong, W.T.; Platts, D.A.; Sherwood, E.G.

1979-01-01

The equilibrium, confinement, and stability properties of the reversed-field configuration (RFC) are being studied in two theta-pinch facilities. The RFC is an elongated toroidal plasma confined in a purely poloidal field geometry. The open field lines of the linear theta pinch support the closed-field RFC much like the vertical field centres the toroidal plasma in a tokamak. Depending on stability and confinement properties, the RFC might be used to greatly reduce the axial losses in linear fusion devices such as mirrors, theta pinches, and liners. The FRX systems produce RFCs with a major radius R=2-6cm, a minor radius a approximately 2cm, and a total length l approximately 35cm. The observed temperatures are Tsub(e) approximately 100eV and Tsub(i)=150-350eV with a peak density n approximately 2x10 15 cm -3 . After the plasma has reached equilibrium, the RFC remains stable for up to 30μs, followed by the rapid growth of the rotational m=2 instability, which terminates the confinement. During the stable equilibrium, the particle and energy confinement times are more than 10 times longer than in an open-field system. The behaviour of the m=2 mode agrees qualitatively with the theoretically predicted instability for rotational velocities exceeding some critical value. (author)

The Effects of Feeding Raw Fiber Concentrate on Growth Performance and Blood Metabolites of Suckling Holstein Calves

OpenAIRE

Mehdi Dehghan-Banadaky; Fridoon Niazi; Mohsen Ghiasvand

2012-01-01

Sixteen female Holstein calves allocated in three treatments including: 1: control, 2: fed raw fiber concentrate (RFC) for 45 days and 3: fed RFC for 90 days. RFC supplement (Vitacel® 200) was added to milk immediately before feeding (10 g/L milk). Withers height and body weights of calves were measured monthly. Individual dry matter intake was recorded daily. Blood samples were taken monthly. The result showed that calves consumed RFC had significantly greater weaning an...

Ultra-High Efficiency and Low-Emissions Combustion Technology for Manufacturing Industries

Energy Technology Data Exchange (ETDEWEB)

Atreya, Arvind

2013-04-15

The purpose of this research was to develop and test a transformational combustion technology for high temperature furnaces to reduce the energy intensity and carbon footprint of U.S. manufacturing industries such as steel, aluminum, glass, metal casting, and petroleum refining. A new technology based on internal and/or external Flue Gas Recirculation (FGR) along with significant enhancement in flame radiation was developed. It produces "Radiative Flameless Combustion (RFC)" and offers tremendous energy efficiency and pollutant reduction benefits over and above the now popular "flameless combustion." It will reduce the energy intensity (or fuel consumption per unit system output) by more than 50% and double the furnace productivity while significantly reducing pollutants and greenhouse gas emissions (10^3 times reduction in NOx and 10 times reduction in CO & hydrocarbons and 3 times reduction in CO2). Product quality improvements are also expected due to uniform radiation, as well as, reduction in scale/dross formation is expected because of non-oxidative atmosphere. RFC is inexpensive, easy to implement, and it was successfully tested in a laboratory-scale furnace at the University of Michigan during the course of this work. A first-ever theory with gas and particulate radiation was also developed. Numerical programs were also written to design an industrial-scale furnace. Nine papers were published (or are in the process of publication). We believe that this early stage research adequately proves the concept through laboratory experiments, modeling and computational models. All this work is presented in the published papers. Important conclusions of this work are: (1) It was proved through experimental measurements that RFC is not only feasible but a very beneficial technology. (2) Theoretical analysis of RFC was done in (a) spatially uniform strain field and (b) a planar momentum jet where the strain rate is neither prescribed nor uniform. Four important non

Xenopus reduced folate carrier regulates neural crest development epigenetically.

Directory of Open Access Journals (Sweden)

Jiejing Li

Full Text Available Folic acid deficiency during pregnancy causes birth neurocristopathic malformations resulting from aberrant development of neural crest cells. The Reduced folate carrier (RFC is a membrane-bound receptor for facilitating transfer of reduced folate into the cells. RFC knockout mice are embryonic lethal and develop multiple malformations, including neurocristopathies. Here we show that XRFC is specifically expressed in neural crest tissues in Xenopus embryos and knockdown of XRFC by specific morpholino results in severe neurocristopathies. Inhibition of RFC blocked the expression of a series of neural crest marker genes while overexpression of RFC or injection of 5-methyltetrahydrofolate expanded the neural crest territories. In animal cap assays, knockdown of RFC dramatically reduced the mono- and trimethyl-Histone3-K4 levels and co-injection of the lysine methyltransferase hMLL1 largely rescued the XRFC morpholino phenotype. Our data revealed that the RFC mediated folate metabolic pathway likely potentiates neural crest gene expression through epigenetic modifications.

Sulfolobus Replication Factor C stimulates the activity of DNA Polymerase B1

DEFF Research Database (Denmark)

Xing, Xuanxuan; Zhang, Likui; Guo, Li

2014-01-01

the hyperthermophilic archaea of the genus Sulfolobus physically interacts with DNA polymerase B1 (PolB1) and enhances both the polymerase and 3'-5' exonuclease activities of PolB1 in an ATP-independent manner. Stimulation of the PolB1 activity by RFC is independent of the ability of RFC to bind DNA but is consistent...... with the ability of RFC to facilitate DNA binding by PolB1 through protein-protein interaction. These results suggest that Sulfolobus RFC may play a role in recruiting DNA polymerase for efficient primer extension, in addition to clamp loading, during DNA replication....

The effect of refined functional carbohydrates from enzymatically hydrolyzed yeast on the transmission of environmental Salmonella Senftenberg among broilers and proliferation in broiler housing.

Science.gov (United States)

Walker, G K; Jalukar, S; Brake, J

2018-04-01

Hatching eggs collected from resident broiler breeders at 48 wk of age were used to produce male and female chicks that were assigned sex separately to 96 new litter pens and fed either a 0 or 50 g/MT RFC (refined functional carbohydrate feed additive derived from yeast) diet. There were 24 replicate pens of 12 broilers each per diet per sex. Feed intake and BW were determined at 14, 28, and 42 d of age. Litter was sampled by pen using sterile socks at 35 d and tested for Salmonella spp. using an enzyme linked fluorescence assay method. Salmonella spp. was isolated from 7 of 48 control-fed broiler pens but no RFC-fed pens (P ≤ 0.05). Thereafter, 48 males and 48 females were selected based on litter Salmonella presence and RFC treatment. The cecas of these broilers were aseptically excised after feed withdrawal and lairage and tested for presence of Salmonella spp. There were 18 of the 48 control-fed broilers confirmed positive from litter-positive pens but none from litter-negative pens fed RFC. The serovar of litter and cecal Salmonella isolates was Salmonella enterica subsp. enterica serovar Senftenberg (S. Senftenberg). Female broilers that were fed RFC exhibited greater BW at 28 d (P ≤ 0.05) and 42 d (P ≤ 0.05) while RFC-fed males exhibited improved feed efficiency during the 15-28 d period (P = 0.06). These data demonstrated that dietary RFC reduced the prevalence of Salmonella in the litter and ceca of broilers when fed continuously while not being detrimental to broiler live performance.

Factors Affecting Aerosol Radiative Forcing from Both Production-based and Consumption-based View

Science.gov (United States)

Wang, J.; Lin, J.; Ni, R.

2017-12-01

Aerosol radiative forcing (RF) is determined by emissions and various chemical-transport-radiative processes in the atmosphere, a multi-factor problem whose individual contributors have not been well quantified. This problem becomes more complicated when taking into account the role of international trade, which means reallocated aerosol RF due to separation of regions producing goods and emissions and regions consuming those goods. Here we analyze major factors affecting RF of secondary inorganic aerosols (SIOAs, including sulfate, nitrate and ammonium), primary organic aerosol (POA) and black carbon (BC), extending the work of Lin et al. (2016, Nature Geoscience). We contrast five factors determining production-based (RFp, due to a region's production of goods) and consumption-based (RFc, due to a region's consumption) forcing by 11 major regions, including population size, per capita output, emission intensity (emission per output), chemical efficiency (mass per unit emission) and radiative efficiency (RF per unit mass). Comparing across the 11 regions, East Asia produces the strongest RFp and RFc of SIOA and BC and the second largest RFp and RFc of POA primarily due to its high emission intensity. Although Middle East and North Africa has low emissions, its RFp is strengthened by its largest chemical efficiency for POA and BC and second largest chemical efficiency for SIOA. However, RFp of South-East Asia and Pacific is greatly weakened by its lowest chemical efficiency. Economic trade means that net importers (Western Europe, North America and Pacific OECD) have higher RFc than RFp by 50-100%. And such forcing difference is mainly due to the high emission intensity of the exporters supplying these regions. For North America, SIOA's RFc is 50% stronger than RFp, for that emission intensity of SIOA is 5.2 times in East Asia and 2.5 times in Latin America and Caribbean compared with that in North America, and the chemical efficiency in the top four exporters are

Influence of chemotherapeutic drug-related gene polymorphisms on toxicity and survival of early breast cancer patients receiving adjuvant chemotherapy.

Science.gov (United States)

Ludovini, Vienna; Antognelli, Cinzia; Rulli, Antonio; Foglietta, Jennifer; Pistola, Lorenza; Eliana, Rulli; Floriani, Irene; Nocentini, Giuseppe; Tofanetti, Francesca Romana; Piattoni, Simonetta; Minenza, Elisa; Talesa, Vincenzo Nicola; Sidoni, Angelo; Tonato, Maurizio; Crinò, Lucio; Gori, Stefania

2017-07-26

We investigated whether GSTT1 ("null" allele), GSTM1 ("null"allele), GSTP1 (A313G), RFC1 (G80A), MTHFR (C677T), TS (2R/3R) polymorphisms were associated with toxicity and survival in patients with early breast cancer (EBC) treated with adjuvant chemotherapy (CT). This prospective trial included patients with stage I-III BC subjected to CT with CMF or FEC regimens. PCR-RFLP was performed for MTHFR, RFC1 and GSTP1, while PCR for TS, GSTT1 and GSTM1 genes. Among the 244 patients consecutively enrolled, 48.7% were treated with FEC and 51.3% with CMF. Patients with TS2R/3R genotype showed less frequently severe neutropenia (G3/G4) than those with TS2R/2R and 3R/3R genotype (p = 0.038). Patients with MTHFRCT genotype had a higher probability of developing severe neutropenia than those with MTHFR CC genotype (p = 0.043). Patients with RFC1GG or GSTT1-null genotype or their combination (GSTT1-null/RFC1GG) were significantly associated with a shorter disease free survival (DFS) (p = 0.009, p = 0.053, p = 0.003, respectively) and overall survival (OS) (p = 0.036, p = 0.015, p = 0.005, respectively). Multivariate analysis confirmed the association of RFC1GG genotype with a shorter DFS (p = 0.018) and of GSTT1-null genotype of a worse OS (p = 0.003), as well as for the combined genotypes GSTT1-null/RFC1GG, (DFS: p = 0.004 and OS: p = 0.003). Our data suggest that TS2R/2R and 3R/3R or MTHFR CT genotypes have a potential role in identifying patients with greater risk of toxicity to CMF/FEC and that RFC1 GG and GSTT1-null genotypes alone or in combination could be important markers in predicting clinical outcome in EBC patients.

Analysis of association between polymorphisms of MTHFR, MTHFD1 and RFC1 genes and efficacy and toxicity of methotrexate in rheumatoid arthritis patients

Directory of Open Access Journals (Sweden)

Vejnovic Dubravka

2016-01-01

Full Text Available A folate analogue methotrexate (MTX is the most commonly used disease-modifying drug in the treatment of rheumatoid arthritis. However, the clinical response of RA patients treated with MTX shows interindividual differences and 30% of patients discontinue therapy due to the side effects. In a group of 184 RA patients treated with MTX we have investigated whether polymorphisms in MTHFR (rs1801133, rs1801131, MTHFD1 (rs2236225 and RFC1 (rs144320551 genes may have impact on MTX efficacy and/or adverse drugs effects (ADEs. The efficacy of the MTX therapy has been estimated using the disease activity score in 28 joints (DAS28-ESR based on EULAR criteria and relative DAS28 values (rDAS28 and all adverse drug events were recorded. Patients were genotyped for selected polymorphism by PCR-RFLP method. According to the EULAR response criteria after 6 months of MTX therapy 146 (79.3% patients were classified as responders, (17 patients (11.6% were good and 129 patients (88.4% were moderate responders and 38 patients (20.7% as non-responders. ADEs were observed in 53 (28.8% patients. The majority of ADEs were mild (36 (19.56% patients to moderate (12 (6.25% patients. Five patients (2.7% had serious ADEs. Association studies have been conducted between obtained genotypes and the efficacy and toxicity of MTX. We have observed no association between polymorphisms and efficacy or toxicity of MTX in RA patients. [Projekat Ministarstva nauke Republike Srbije, br. 175091

A Study of Single Nucleotide Polymorphisms of the SLC19A1/RFC1 Gene in Subjects with Autism Spectrum Disorder

Directory of Open Access Journals (Sweden)

Naila Al Mahmuda

2016-05-01

Full Text Available Autism Spectrum Disorder (ASD is a group of neurodevelopmental disorders with complex genetic etiology. Recent studies have indicated that children with ASD may have altered folate or methionine metabolism, suggesting that the folate–methionine cycle may play a key role in the etiology of ASD. SLC19A1, also referred to as reduced folate carrier 1 (RFC1, is a member of the solute carrier group of transporters and is one of the key enzymes in the folate metabolism pathway. Findings from multiple genomic screens suggest the presence of an autism susceptibility locus on chromosome 21q22.3, which includes SLC19A1. Therefore, we performed a case-control study in a Japanese population. In this study, DNA samples obtained from 147 ASD patients at the Kanazawa University Hospital in Japan and 150 unrelated healthy Japanese volunteers were examined by the sequence-specific primer-polymerase chain reaction method pooled with fluorescence correlation spectroscopy. p < 0.05 was considered to represent a statistically significant outcome. Of 13 single nucleotide polymorphisms (SNPs examined, a significant p-value was obtained for AA genotype of one SNP (rs1023159, OR = 0.39, 95% CI = 0.16–0.91, p = 0.0394; Fisher’s exact test. Despite some conflicting results, our findings supported a role for the polymorphism rs1023159 of the SLC19A1 gene, alone or in combination, as a risk factor for ASD. However, the findings were not consistent after multiple testing corrections. In conclusion, although our results supported a role of the SLC19A1 gene in the etiology of ASD, it was not a significant risk factor for the ASD samples analyzed in this study.

Effects of varying forage particle size and fermentable carbohydrates on feed sorting, ruminal fermentation, and milk and component yields of dairy cows.

Science.gov (United States)

Maulfair, D D; Heinrichs, A J

2013-05-01

Ration sorting is thought to affect ruminal fermentation in such a manner that milk yield milk and components are often decreased. However, the influence of ruminally degradable starch on ration sorting has not been studied. Therefore, the objective of this experiment was to evaluate the interactions between forage particle size (FPS) and ruminally fermentable carbohydrates (RFC) for dry matter intake (DMI), ration sorting, ruminal fermentation, chewing activity, and milk yield and components. In this study, 12 (8 ruminally cannulated) multiparous, lactating Holstein cows were fed a total mixed ration that varied in FPS and RFC. Two lengths of corn silage were used to alter FPS and 2 grind sizes of corn grain were used to alter RFC. It was determined that increasing RFC increased ruminating time and did not affect eating time, whereas increasing FPS increased eating time and did not affect ruminating time. Ruminal fermentation did not differ by altering either FPS or RFC. However, increasing FPS tended to increase mean and maximum ruminal pH and increasing RFC tended to decrease minimum ruminal pH. Particle size distribution became more diverse and neutral detergent fiber content of refusals increased over time, whereas starch content decreased, indicating that cows were sorting against physically effective neutral detergent fiber and for RFC. Selection indices determined that virtually no interactions occurred between FPS and RFC and that despite significant sorting throughout the day, by 24h after feeding cows had consumed a ration very similar to what was offered. This theory was reinforced by particle fraction intakes that very closely resembled the proportions of particle fractions in the offered total mixed ration. An interaction between FPS and RFC was observed for DMI, as DMI decreased with increasing FPS when the diet included low RFC and did not change when the diet included high RFC. Dry matter intake increased with RFC for long diets and did not change

Plants as Natural Dyes for Jonegoroan Batik Processing in Jono Cultural Tourism Village, Bojonegoro, East Java

Directory of Open Access Journals (Sweden)

Nurizza Fauziyah

2015-05-01

Full Text Available Batik Jonegoroan is one of the potential tourism product in Jono Village, Bojonegoro. Batik was processed by traditional procedure using natural dyes from plants. In order to preserve the traditional batik which was colored by natural dyes from plant, the preservation of such plant were important. As far, there are no scientific data related to the species usage in Batik production. The aims of the research were identifying plant which were used as natural dyes in Batik processing. Data were collected ​​through observation, and  semi-structured interviews to batik craftsmen. Results of interviews were analyzed descriptively. The importance of plant was analyzed using Relative Frequency of Citation (RFC index. Based on the results, there are 12 plant species used as batik dye. It is consisted of Teak, Mahogany, Ketapang, Tamarind, Mangosteen, Mango, Suji, Pandan, Indigofera, Guava, Banana and Onion. Teak (Tectonagrandis L. and Mahogany (Swietenia mahogany L. have the highest value of RFC, 1.00. Both species were the most frequently cited species as sources of natural dyes. Extraction of Teak leaves produce red hearts and extraction of mahogany tree bark produces red-brown dye. Both of the color is the most important color in batik motifs. Keywords: batik Jonegoroan, Jono Cultural Tourism Village, perception, quality, RFC

DNA replication factor C1 mediates genomic stability and transcriptional gene silencing in Arabidopsis

KAUST Repository

Liu, Qian; Wang, Junguo; Miki, Daisuke; Xia, Ran; Yu, Wenxiang; He, Junna; Zheng, Zhimin; Zhu, Jian-Kang; Gonga, Zhizhong

2010-01-01

Genetic screening identified a suppressor of ros1-1, a mutant of REPRESSOR OF SILENCING1 (ROS1; encoding a DNA demethylation protein). The suppressor is a mutation in the gene encoding the largest subunit of replication factor C (RFC1). This mutation of RFC1 reactivates the unlinked 35S-NPTII transgene, which is silenced in ros1 and also increases expression of the pericentromeric Athila retrotransposons named transcriptional silent information in a DNA methylationindependent manner. rfc1 is more sensitive than the wild type to the DNA-damaging agent methylmethane sulphonate and to the DNA inter- and intra- cross-linking agent cisplatin. The rfc1 mutant constitutively expresses the G2/M-specific cyclin CycB1;1 and other DNA repair-related genes. Treatment with DNA-damaging agents mimics the rfc1 mutation in releasing the silenced 35S-NPTII, suggesting that spontaneously induced genomic instability caused by the rfc1 mutation might partially contribute to the released transcriptional gene silencing (TGS). The frequency of somatic homologous recombination is significantly increased in the rfc1 mutant. Interestingly, ros1 mutants show increased telomere length, but rfc1 mutants show decreased telomere length and reduced expression of telomerase. Our results suggest that RFC1 helps mediate genomic stability and TGS in Arabidopsis thaliana. © 2010 American Society of Plant Biologists.

DNA replication factor C1 mediates genomic stability and transcriptional gene silencing in Arabidopsis

KAUST Repository

Liu, Qian

2010-07-01

Genetic screening identified a suppressor of ros1-1, a mutant of REPRESSOR OF SILENCING1 (ROS1; encoding a DNA demethylation protein). The suppressor is a mutation in the gene encoding the largest subunit of replication factor C (RFC1). This mutation of RFC1 reactivates the unlinked 35S-NPTII transgene, which is silenced in ros1 and also increases expression of the pericentromeric Athila retrotransposons named transcriptional silent information in a DNA methylationindependent manner. rfc1 is more sensitive than the wild type to the DNA-damaging agent methylmethane sulphonate and to the DNA inter- and intra- cross-linking agent cisplatin. The rfc1 mutant constitutively expresses the G2/M-specific cyclin CycB1;1 and other DNA repair-related genes. Treatment with DNA-damaging agents mimics the rfc1 mutation in releasing the silenced 35S-NPTII, suggesting that spontaneously induced genomic instability caused by the rfc1 mutation might partially contribute to the released transcriptional gene silencing (TGS). The frequency of somatic homologous recombination is significantly increased in the rfc1 mutant. Interestingly, ros1 mutants show increased telomere length, but rfc1 mutants show decreased telomere length and reduced expression of telomerase. Our results suggest that RFC1 helps mediate genomic stability and TGS in Arabidopsis thaliana. © 2010 American Society of Plant Biologists.

Three-Dimensional Analysis of the Curvature of the Femoral Canal in 426 Chinese Femurs

Directory of Open Access Journals (Sweden)

Xiu-Yun Su

2015-01-01

Full Text Available Purpose. The human femur has long been considered to have an anatomical anterior curvature in the sagittal plane. We established a new method to evaluate the femoral curvature in three-dimensional (3D space and reveal its influencing factors in Chinese population. Methods. 3D models of 426 femurs and the medullary canal were constructed using Mimics software. We standardized the positions of all femurs using 3ds Max software. After measuring the anatomical parameters, including the radius of femoral curvature (RFC and banking angle, of the femurs using the established femur-specific coordinate system, we analyzed and determined the relationships between the anatomical parameters of the femur and the general characteristics of the population. Results. Pearson’s correlation analyses showed that there were positive correlations between the RFC and height (r=0.339, p<0.001 and the femoral length and RFC (r=0.369, p<0.001 and a negative correlation between the femoral length and banking angle (r=-0.223, p<0.001. Stepwise linear regression analyses showed that the most relevant factors for the RFC and banking angle were the femoral length and gender, respectively. Conclusions. This study concluded that the banking angle of the femur was significantly larger in female than in male.

High Efficiency Power Converter for a Doubly-fed SOEC/SOFC System

DEFF Research Database (Denmark)

Tomas Manez, Kevin; Anthon, Alexander; Zhang, Zhe

2016-01-01

Regenerative fuel cells (RFC) have become an attractive technology for energy storage systems due to their high energy density and lower end-of-life disposal concerns. However, high efficiency design of power conditioning unit (PCU) for RFC becomes challenging due to their asymmetrical currentpow...... operating range of the RFC as well as the utilization of the same control strategy design for the two RFC operating modes....

Antibacterial effects and toxigenesis of Penicillium aurantiogriseum ...

African Journals Online (AJOL)

SERVER

2007-10-18

Oct 18, 2007 ... The toxigenesis of one Penicillium aurantiogriseum and one Penicillium viridicatum isolates was investigated. Sterile culture filtrates of both fungi had a clear antibacterial effect only against Bacillus subtilis. The effect on B. subtilis varied with amount of filtrate used and temperature. The antibacterial.

Quantitative correlation between promoter methylation and messenger RNA levels of the reduced folate carrier

Directory of Open Access Journals (Sweden)

Kheradpour Albert

2008-05-01

Full Text Available Abstract Background Methotrexate (MTX uptake is mediated by the reduced folate carrier (RFC. Defective drug uptake in association with decreased RFC expression is a common mechanism of MTX resistance in many tumor types. Heavy promoter methylation was previously identified as a basis for the complete silencing of RFC in MDA-MB-231 breast cancer cells, its role and prevalence in RFC transcription regulation are, however, not widely studied. Methods In the current study, RFC promoter methylation was assessed using methylation specific PCR in a panel of malignant cell lines (n = 8, including MDA-MB-231, and M805, a MTX resistant cell line directly established from the specimen of a patient with malignant fibrohistocytoma, whom received multiple doses of MTX. A quantitative approach of real-time PCR for measuring the extent of RFC promoter methylation was developed, and was validated by direct bisulfite genomic sequencing. RFC mRNA levels were determined by quantitative real-time RT-PCR and were related to the extent of promoter methylation in these cell lines. Results A partial promoter methylation and RFC mRNA down-regulation were observed in M805. Using the quantitative approach, a reverse correlation (correlation coefficient = -0.59, p Conclusion This study further suggests that promoter methylation is a potential basis for MTX resistance. The quantitative correlation identified in this study implies that promoter methylation is possibly a mechanism involved in the fine regulation of RFC transcription.

Renal embolic protection devices improve blood flow after stenting for atherosclerotic renal artery stenosis.

Science.gov (United States)

Paul, Timir K; Lee, John H; White, Christopher J

2012-11-15

We sought to measure angiographic renal frame counts (RFC), as a quantitative angiographic assessment of renal blood flow, to evaluate microvascular compromise due to atheroembolism associated with RAS. Atheroembolism associated with renal artery stenting (RAS) has been implicated as a cause for worsening renal function following successful intervention. Use of a distal embolic protection device (EPD) during RAS has been shown to be safe with debris capture in a high percentage of cases. However, objective benefit for renal function with EPD has been difficult to demonstrate. A control group of 30 consecutive patients (33 kidneys) who underwent RAS without EPD were compared with 33 consecutive patients (33 kidneys) who underwent RAS with EPD using RFC measurement. The prestent and poststent mean RFC for the control group was 30.4 ± 12.1 vs. 23.7 ± 9.9 (P = 0.002) and for the EPD group it was 42.6 ± 12.6 vs. 28.3 ± 9.2 (P renal blood flow, manifested by a greater reduction of the RFC (Δ RFC) 14.2 ± 15.2 vs. 6.7 ± 11.7 (P = 0.03) compared with the control group. The use of an EPD was associated with a much larger improvement in renal blood flow (lower RFC) following RAS. This suggests that EPD's may be effective in preventing renal atheroembolic injury and that a controlled trial measuring the impact of EPD's on renal blood flow following RAS should be performed. Copyright © 2012 Wiley Periodicals, Inc.

Toxic micromycetes in grain raw material during its processing.

Science.gov (United States)

Lugauskas, Albinas; Raila, Algirdas; Railiene, Marija; Raudoniene, Vita

2006-01-01

In 2003-2005 micromycetes were isolated and identified from wheat, barley, rye, buckwheat grain brought into mills or from processing enterprises. Contamination of the produced flour with micromycete propagules (cfu g(-1)), changes in micromycete diversity and abundance in the course of flour storage, preparation and baking of bread, production of groats or other food products and fodder were determined. Most attention was given to widely distributed micromycetes, known producers of toxins: Alternaria alternata, Aspergillus candidus, A. clavatus, A. flavus, A. fumigatus, A. niger, A. oryzae, A. (=Eurotium) repens, Fusarium culmorum, F. equiseti, F. graminearum, F. moniliforme, F. oxysporum, F. poae, F. sporotrichioides, Penicillium brevicompactum, P. chrysogenum, P. cyclopium, P. daleae, P. expansum, P. funiculosum, P. roqueforti, P. urticae, P. verruculosum, P. viridicatum, Phoma exiqua, Rhizomucor pusillus, Rhizopus stolonifer, Trichothecium roseum. Abilities of these micromycetes to produce secondary toxic metabolites were determined as well as possible hazard caused to people consuming the contaminated products.

IPCC Reasons for Concern Regarding Climate Change Risks: Implications for 1.5 and 2 C Targets

Science.gov (United States)

O'Neill, B. C.; Oppenheimer, M.

2016-12-01

The Reasons for Concern (RFC) framework communicates scientific understanding about risks in relation to varying levels of climate change. The framework, which has been a cornerstone of the Intergovernmental Panel on Climate Change (IPCC) assessments since the Third Assessment Report, aggregates global risks into five categories as a function of global mean temperature change (GMT). The RFC framework was developed to inform discussions relevant to implementation of Article 2 of the UN Framework Convention on Climate Change (UNFCCC). Article 2 presents the Convention's long-term objective of avoiding "dangerous anthropogenic interference with the climate system." The RFC framework and the associated "Burning Embers" diagram illustrating authors' risk judgments have since been widely discussed and used to inform policy decisions. For example, they informed a recent dialog between Parties to the UNFCCC and experts on the adequacy of the long-term goal of avoiding a warming of 2°C relative to pre-industrial, contributing to a strengthening of that goal in the recent Paris Agreement. We draw on a new review and update of the RFC's conceptual basis and the risk judgments made in the most recent IPCC report to discuss their implications for risks associated with GMT targets of 1.5 C and 2 C adopted in the Paris Agreement. In general, the RFCs imply that continued high emissions of greenhouse gases (GHGs) would lead to high or very high risk of severe, widespread, and in some cases irreversible climate change impacts within this century. At 2°C above preindustrial, High risks are based on increasing risks to Arctic and coral reef systems, as well as increasing species extinction risks that undermine ecosystems (RFC 1), and projected increasing magnitude and likelihood of extreme weather events (RFC 2). Moderate-to-High risks are based on projections of increasing risks to crop production and water resources (RFC 3), and to the risks associated with ice sheet

Analysis of the role of PCNA-DNA contacts during clamp loading

Directory of Open Access Journals (Sweden)

Goedken Eric R

2010-01-01

Full Text Available Abstract Background Sliding clamps, such as Proliferating Cell Nuclear Antigen (PCNA in eukaryotes, are ring-shaped protein complexes that encircle DNA and enable highly processive DNA replication by serving as docking sites for DNA polymerases. In an ATP-dependent reaction, clamp loader complexes, such as the Replication Factor-C (RFC complex in eukaryotes, open the clamp and load it around primer-template DNA. Results We built a model of RFC bound to PCNA and DNA based on existing crystal structures of clamp loaders. This model suggests that DNA would enter the clamp at an angle during clamp loading, thereby interacting with positively charged residues in the center of PCNA. We show that simultaneous mutation of Lys 20, Lys 77, Arg 80, and Arg 149, which interact with DNA in the RFC-PCNA-DNA model, compromises the ability of yeast PCNA to stimulate the DNA-dependent ATPase activity of RFC when the DNA is long enough to extend through the clamp. Fluorescence anisotropy binding experiments show that the inability of the mutant clamp proteins to stimulate RFC ATPase activity is likely caused by reduction in the affinity of the RFC-PCNA complex for DNA. We obtained several crystal forms of yeast PCNA-DNA complexes, measuring X-ray diffraction data to 3.0 Å resolution for one such complex. The resulting electron density maps show that DNA is bound in a tilted orientation relative to PCNA, but makes different contacts than those implicated in clamp loading. Because of apparent partial disorder in the DNA, we restricted refinement of the DNA to a rigid body model. This result contrasts with previous analysis of a bacterial clamp bound to DNA, where the DNA was well resolved. Conclusion Mutational analysis of PCNA suggests that positively charged residues in the center of the clamp create a binding surface that makes contact with DNA. Disruption of this positive surface, which had not previously been implicated in clamp loading function, reduces RFC

Reduced folate carrier polymorphism (80A-->G) and neural tube defects.

Science.gov (United States)

De Marco, Patrizia; Calevo, Maria Grazia; Moroni, Anna; Merello, Elisa; Raso, Alessandro; Finnell, Richard H; Zhu, Huiping; Andreussi, Luciano; Cama, Armando; Capra, Valeria

2003-03-01

Transport of folates in mammalian cells occurs by a carrier-mediated mechanism. The human folate carrier (RFC-1) gene has been isolated and characterized. Within this gene, a common polymorphism, 80A-->G, changing a histidine to an arginine in exon 2 (H27R), was recently identified. Defects in folate metabolism, such as defective carrier molecules, could be implicated in the etiology of neural tube defects (NTDs). In the present case-control study, we recruited 174 Italian probands with nonsyndromic NTD, 43 mothers, 53 fathers and 156 control individuals and evaluated the impact of RFC-1 variant on NTD risk. A statistically significant risk was calculated for the 80GG genotype of the NTD cases (OR=2.35; 95% CI 1.21-4.58) and mothers (OR=2.74; 95% CI 0.92-8.38). On the contrary, the heterozygous genotype of the mothers and both heterozygous and homozygous genotypes of the fathers did not seem to be significant NTD risk factors. Furthemore, according to the multifactorial inheritance of NTDs, we demonstrated that the combined genotypes for MTHFR 1298A-->C and RFC-1 80A-->G polymorphisms of cases resulted in greater NTD risk than heterozygosity or homozygosity for RFC-1 80A-->G variant alone. Conversely, our data provide no evidence for an association between NTD phenotype and combined MTHFR C677T/RFC-1 A80G genotypes. Moreover, here we describe the combinations of the two MTHFR polymorphic sites (677CT and 1298AC) with RFC-1 genotypes. We found that both patients and controls could have at most quadruple-mutation combinations. Interestingly, 27% (7/26) of the mothers and 18.75% (30/160) of the cases genotyped presented four mutant alleles in comparison with 8.5% (11/129) of the controls. Finally, the frequency of NTD cases and mothers carrying combined heterozygosity for the two MTHFR polymorphisms and RFC-1 80GG homozygosity (677CT/1298AC/80GG) (cases=11.3%; mothers 11.5%) was increased compared with controls (1.6%). Altogether, our findings support the hypothesis

Gigabit Network Communications Research, Quarterly R and D Report Number 10

Science.gov (United States)

1993-03-01

EDTIC- ELECTE .SSEP01O3IS" EU * Sponsored by Advanced Research Projects Agency (DoD) Computer Systems Technology Office Gigabit Network Communications... Information ", Xylogics Inc., January 1993. RFC 1389: Malkin, G. (Xylogics Inc.), and F. Baker (Advanced Computer Communications), "RIP Version 2 MIB...Reynolds, J.K., "BOOTP Vendor Information Extensions", USC/ISI, January 1993. RFC 1396: Crocker, S., "The Process for Organization of Internet Standards

Internet FAQ Archives - Online Education - faqs.org

Science.gov (United States)

faqs.org Internet FAQ Archives - Online Education faqs.org faqs.org - Internet FAQ Archives Internet FAQ Archives Online Education Internet RFC Index Usenet FAQ Index Other FAQs Documents Tools IFC Rated FAQs Internet RFC/STD/FYI/BCP Archives The Internet RFC series of documents is also available from

Environmental biodegradation of haloarchaea-produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in activated sludge

DEFF Research Database (Denmark)

Liu, Xiao-Bin; Wu, Linping; Hou, Jing

2016-01-01

-produced PHBHV films, with 10~60 mol% 3-hydroxyvalerate (3HV) composition and different microchemical structures, was studied in nutrition-depleted activated sludge. The changes in mass, molar mass, chemical composition, thermal properties, and surface morphology were monitored. The mass and molar mass of each...

Ethnobotanical Study of Medicinal Plants Used for the Treatment of Malaria in the Plateau Region, Togo.

Science.gov (United States)

Agbodeka, Kodjovi; Gbekley, Holaly E; Karou, Simplice D; Anani, Kokou; Agbonon, Amegnona; Tchacondo, Tchadjobo; Batawila, Komlan; Simpore, Jacques; Gbeassor, Messanvi

2016-03-01

In Togo, malaria constitutes a major public health problem but, until now, the population still mostly relies on herbal medicine for healing. This study aimed to document medicinal plants used for malaria therapy in the Plateau region of the country. Semi-structured questionnaire interviews were used to gather ethnobotanical and sociodemographic data from traditional healers of the study area. A total of 61 plants species belonging to 33 families were found to be in use for malaria therapy in the Plateau region. Caesalpiniaceae were the most represented family with 7 species, followed by Euphorbiaceae and Poaceae with 4 species each. According to the relative frequency of citation (RFC), Newbouldia laevis Seem. (RFC =0.52), Sarcocephalus latifolius (Sm.) E.A. Bruce (RFC =0.48), Acanthospermum hispidum DC. (RFC =0.43), and Senna siamea (Lam.) H.S. Irwin and Barneby (RFC =0.40) were the most cited in the treatment of malaria in the traditional medicine in the Plateau region. The parts of plants used could either be the barks, roots, leaves, or whole plants. The recipes also could be a combination of various species of plants or plant parts. This study highlights the potential sources for the development of new antimalarial drugs from indigenous medicinal plants found in the Plateau region of Togo. Such results could be a starting point for in vitro antimalarial screenings. 61 plants species from 33 families are use for malaria therapy in the Plateau region of TogoThe main families are Caesalpiniaceae Euphorbiaceae and PoaceaeThe most used species are Newbouldia laevis Seem. (RFC = 0.52), Sarcocephalus latifolius (Sm.) E.A. Bruce (RFC = 0.48), Acanthospermum hispidum DC. (RFC = 0.43), and Senna siamea (Lam.) H.S. Irwin and Barneby (RFC = 0.40) Abbreviations Used: RFC: Relative frequency of citation, FC: Frequency of citation, Dec: Decoction, Orl: Oral route, Mac: Maceration, Jui: Juice, Inf: Infusion, Sau: Sauce, Kne: Kneading, Le: Leaves, Rt: Roots, Wp: Whole plant

Effects of fruit thinning, covering of the fruit truss and CO2 enrichment on radial fruit cracking in tomato [Lycopersicon esculentum] production under rain shelter in cool uplands

International Nuclear Information System (INIS)

Suzuki, T.; Nomura, Y.; Shimazu, T.; Tanaka, I.

2009-01-01

Radial fruit cracking (RFC) can contribute to serious economic losses in tomato production under rain shelter in cool uplands. In order to investigate the effects of translocation and distribution of photosynthate to the fruits during the occurrence of RFC, tomato plants were grown under treatments with fruit thinning and CO2 enrichment, which regulate the strength of sink and source, and treatments with covering of the fruit truss, which decreases solar radiation incident on the fruit surface. The occurrence of RFC was increased by fruit thinning and CO2 enrichment, and decreased by covering of fruit truss. Time course of the percentage of RFC to total harvest showed a remarkable rise toward the end of August and toward the end of October in 2004, when harvested fruit weight was increasing. These finding suggest that RFC is attributed to excessive enlargement of the fruit by promotion of translocation and distribution of photosynthate from leaves (source) to fruits (sink) and the solar radiation incident on the fruits. In addition, the relation between RFC and the generation of a cork layer is considered

Neural correlates of verbal creativity: Differences in resting-state functional connectivity associated with expertise in creative writing

Directory of Open Access Journals (Sweden)

Martin eLotze

2014-07-01

Full Text Available Neural characteristics of verbal creativity as assessed by word generation tasks have been recently identified, but differences in resting-state functional connectivity (rFC between experts and non-experts in creative writing have not been reported yet. Previous electroencephalography (EEG coherence measures during rest demonstrated a decreased cooperation between brain areas in association with creative thinking ability. Here, we used resting-state functional magnetic resonance imaging to compare 20 experts in creative writing and 23 age-matched non-experts with respect to rFC strengths within a brain network previously found to be associated with creative writing. Decreased rFC for experts was found between areas 44 of both hemispheres. Increased rFC for experts was observed between right hemispheric caudate and intraparietal sulcus. Correlation analysis of verbal creativity indices with rFC values in the expert group revealed predominantly negative associations, particularly of rFC between left area 44 and left temporal pole. Overall, our data support previous findings on reduced connectivity between interhemispheric areas and increased right-hemispheric connectivity during rest in highly verbally creative individuals.

3D Modelling and Printing Technology to Produce Patient-Specific 3D Models.

Science.gov (United States)

Birbara, Nicolette S; Otton, James M; Pather, Nalini

2017-11-10

A comprehensive knowledge of mitral valve (MV) anatomy is crucial in the assessment of MV disease. While the use of three-dimensional (3D) modelling and printing in MV assessment has undergone early clinical evaluation, the precision and usefulness of this technology requires further investigation. This study aimed to assess and validate 3D modelling and printing technology to produce patient-specific 3D MV models. A prototype method for MV 3D modelling and printing was developed from computed tomography (CT) scans of a plastinated human heart. Mitral valve models were printed using four 3D printing methods and validated to assess precision. Cardiac CT and 3D echocardiography imaging data of four MV disease patients was used to produce patient-specific 3D printed models, and 40 cardiac health professionals (CHPs) were surveyed on the perceived value and potential uses of 3D models in a clinical setting. The prototype method demonstrated submillimetre precision for all four 3D printing methods used, and statistical analysis showed a significant difference (p3D printed models, particularly using multiple print materials, were considered useful by CHPs for preoperative planning, as well as other applications such as teaching and training. This study suggests that, with further advances in 3D modelling and printing technology, patient-specific 3D MV models could serve as a useful clinical tool. The findings also highlight the potential of this technology to be applied in a variety of medical areas within both clinical and educational settings. Copyright © 2017 Australian and New Zealand Society of Cardiac and Thoracic Surgeons (ANZSCTS) and the Cardiac Society of Australia and New Zealand (CSANZ). Published by Elsevier B.V. All rights reserved.

The Impact of Cryoballoon Versus Radiofrequency Ablation for Paroxysmal Atrial Fibrillation on Healthcare Utilization and Costs: An Economic Analysis From the FIRE AND ICE Trial.

Science.gov (United States)

Chun, K R Julian; Brugada, Josep; Elvan, Arif; Gellér, Laszlo; Busch, Matthias; Barrera, Alberto; Schilling, Richard J; Reynolds, Matthew R; Hokanson, Robert B; Holbrook, Reece; Brown, Benedict; Schlüter, Michael; Kuck, Karl-Heinz

2017-07-27

This study sought to assess payer costs following cryoballoon or radiofrequency current (RFC) catheter ablation of paroxysmal atrial fibrillation in the randomized FIRE AND ICE trial. A trial period analysis of healthcare costs evaluated the impact of ablation modality (cryoballoon versus RFC) on differences in resource use and associated payer costs. Analyses were based on repeat interventions, rehospitalizations, and cardioversions during the trial, with unit costs based on 3 national healthcare systems (Germany [€], the United Kingdom [£], and the United States [$]). Total payer costs were calculated by applying standard unit costs to hospital stays, using International Classification of Diseases, 10th Revision diagnoses and procedure codes that were mapped to country-specific diagnosis-related groups. Patients (N=750) randomized 1:1 to cryoballoon (n=374) or RFC (n=376) ablation were followed for a mean of 1.5 years. Resource use was lower in the cryoballoon than the RFC group (205 hospitalizations and/or interventions in 122 patients versus 268 events in 154 patients). The cost differences per patient in mean total payer costs during follow-up were €640, £364, and $925 in favor of cryoballoon ablation ( P =0.012, 0.013, and 0.016, respectively). This resulted in trial period total cost savings of €245 000, £140 000, and $355 000. When compared with RFC ablation, cryoballoon ablation was associated with a reduction in resource use and payer costs. In all 3 national healthcare systems analyzed, this reduction resulted in substantial trial period cost savings, primarily attributable to fewer repeat ablations and a reduction in cardiovascular rehospitalizations with cryoballoon ablation. URL: http://www.clinicaltrials.gov. Identifier: NCT01490814. © 2017 The Authors and Medtronic. Published on behalf of the American Heart Association, Inc., by Wiley.

PTK2 expression and immunochemotherapy outcome in chronic lymphocytic leukemia

DEFF Research Database (Denmark)

Weisser, Martin; Yeh, Ru-Fang; Duchateau-Nguyen, Guillemette

2014-01-01

with improved outcomes for CLL patients treated with R-FC vs FC. PTK2 expression may be a useful biomarker for patient selection in future trials. These trials were registered at www.clinicaltrials.gov as #NCT00090051 (REACH) and #NCT00281918 (CLL8)....... assessed genome-wide expression of 300 pretreatment specimens from a subset of 552 patients in REACH, a study of FC or R-FC in relapsed CLL. An independent test set was derived from 282 pretreatment specimens from CLL8, a study of FC or R-FC in treatment-naïve patients. Genes specific for benefit from R-FC...... were determined by assessing treatment-gene interactions in Cox proportional hazards models. REACH patients with higher pretreatment protein tyrosine kinase 2 (PTK2) messenger RNA levels derived greater benefit from R-FC, with significant improvements in progression-free survival, independent of known...

Investigation of Cutting Quality of Remote DOE Laser Cutting in 0.5 mm Stainless Steel

Science.gov (United States)

Villumsen, Sigurd Lazic; Kristiansen, Morten

It has previously been shown that the stability of the remote fusion cutting (RFC) process can be increased by modifying the intensity profile of the laser by means of a diffractive optical element (DOE). This paper investigates the quality of remote DOE cutting (RDC) conducted with a 3 kW single mode fiber laser in 0.5 mm stainless steel. An automatic measurement system is used to investigate how the travel speed, focus offset and angle of incidence effect the kerf width and kerf variance. The study shows that the RDC process has a very low kerf width variance, and that the kerf width decreases with cutting speed. Furthermore, selected etched samples show a significant increase in the perpendicularity of the cuts when compared to RFC. Also, on average, the depth of the layer of molten material for RFC is 83% deeper than for RDC.

Hydrogen-Oxygen PEM Regenerative Fuel Cell Development at the NASA Glenn Research Center

Science.gov (United States)

Bents, David J.; Scullin, Vincent J.; Chang, Bei-Jiann; Johnson, Donald W.; Garcia, Christoher P.; Jakupca, Ian J.

2005-01-01

The closed-cycle hydrogen-oxygen PEM regenerative fuel cell (RFC) at the NASA Glenn Research Center has successfully demonstrated closed cycle operation at rated power for multiple charge-discharge cycles. During charge cycle the RFC has absorbed input electrical power simulating a solar day cycle ranging from zero to 15 kWe peak, and delivered steady 5 kWe output power for periods exceeding 8 hr. Orderly transitions from charge to discharge mode, and return to charging after full discharge, have been accomplished without incident. Continuing test operations focus on: (1) Increasing the number of contiguous uninterrupted charge discharge cycles; (2) Increasing the performance envelope boundaries; (3) Operating the RFC as an energy storage device on a regular basis; (4) Gaining operational experience leading to development of fully automated operation; and (5) Developing instrumentation and in situ fluid sampling strategies to monitor health and anticipate breakdowns.

The association of reduced folate carrier 80G>A polymorphism to outcome in childhood acute lymphoblastic leukemia interacts with chromosome 21 copy number

DEFF Research Database (Denmark)

Gregers, Jannie; Christensen, Ib Jarle; Dalhoff, Kim

2010-01-01

with chromosome 21 copy number in the leukemic clone. A total of 500 children with acute lymphoblastic leukemia treated according to the common Nordic treatment protocols were included, and we found that the RFC AA variant was associated with a 50% better chance of staying in remission compared with GG or GA......The reduced folate carrier (RFC) is involved in the transport of methotrexate (MTX) across the cell membrane. The RFC gene (SLC19A1) is located on chromosome 21, and we hypothesized that the RFC80 G>A polymorphism would affect outcome and toxicity in childhood leukemia and that this could interact...... variants (P = .046). Increased copy numbers of chromosome 21 appear to improve outcome also in children with GA or GG variant. In a subset of 182 children receiving 608 high-dose MTX courses, we observed higher degree of bone marrow toxicity in patients with the RFC AA variant compared with GA/GG variants...

Hydrogen-Oxygen PEM Regenerative Fuel Cell Energy Storage System

Science.gov (United States)

Bents, David J.; Scullin, Vincent J.; Chang, Bei-Jiann; Johnson, Donald W.; Garcia, Christopher P.

2005-01-01

An introduction to the closed cycle hydrogen-oxygen polymer electrolyte membrane (PEM) regenerative fuel cell (RFC), recently constructed at NASA Glenn Research Center, is presented. Illustrated with explanatory graphics and figures, this report outlines the engineering motivations for the RFC as a solar energy storage device, the system requirements, layout and hardware detail of the RFC unit at NASA Glenn, the construction history, and test experience accumulated to date with this unit.

Experiments of spheromak and reversed field configuration in 2m theta pinch

International Nuclear Information System (INIS)

Nogi, Y.; Shimamura, S.; Ogura, H.; Osanai, Y.; Saito, K.; Shiina, S.; Yoshimura, H.

1981-01-01

Since the z-current produces the paramagnetic field near the electrodes, the spheromak formation is more difficult in the straight bias field. In order to help the reconnection at the coil ends, the cusp bias coils are added to both ends of the straight coil. Then the spheromak configuration is formed and the plasma is confined for 5 to 10 μs. On the other hand, the RFC continues for about 30 μs in case of the straight bias field. The confinement time is limited by the rotational instability. Although the start time of the instability is not clear, the elongation of the plasma is detected in 15 to 20 μs after the RFC is formed. The period of the rotation is slightly different every shot. Detailed study of the instability is being pursued

Readiness for change and short-term outcomes of female adolescents in residential treatment for anorexia nervosa.

Science.gov (United States)

McHugh, Matthew D

2007-11-01

To determine if readiness for change (RFC) at admission predicted length of stay (LOS) and short-term outcomes among female adolescents in residential treatment for anorexia nervosa (AN). Using a prospective cohort design to collect data from participants (N = 65) at admission and discharge, Kaplan-Meier survival analysis and Cox regression tested whether RFC on admission predicted time in LOS to a favorable short-term outcome--a composite endpoint based on minimum criteria for weight gain, drive for thinness, depression, anxiety, and health-related quality of life (HRQOL). Participants with low RFC had a mean survival time to a favorable short-term outcome of 59.4 days compared to 34.1 days for those with high RFC (log rank = 8.44, df = 1, p = .003). The probability of a favorable short-term outcome was 5.30 times greater for participants with high RFC. Readiness for change is a useful predictor of a favorable short-term outcome and should be considered in the assessment profile of patients with AN. (c) 2007 by Wiley Periodicals, Inc.

Genetic and epigenetic alterations of the reduced folate carrier in untreated diffuse large B-cell lymphoma

DEFF Research Database (Denmark)

Kastrup, I.B.; Worm, J.; Ralfkiaer, E.

2008-01-01

The reduced folate carrier (RFC) is a transmembrane protein that mediates cellular uptake of reduced folates and antifolate drugs, including methotrexate (MTX). Acquired alterations of the RFC gene have been associated with resistance to MTX in cancer cell lines and primary osteosarcomas. Here, w...... with adverse outcome. In DLBCL, genetic and epigenetic alterations of RFC were detected at diagnosis in the absence of a selective MTX pressure, suggesting that these alterations may possibly contribute to the development of lymphoma Udgivelsesdato: 2008/1...

Erratum: Retraction Note to: "The Second Version of the OCARS Catalog of Optical Characteristics of Astrometric Radio Sources" [Astronomy Reports 60, 996 (2016)

Science.gov (United States)

Malkin, Z. M.

2018-04-01

The Editor-in-Chief is retracting this article [1] because data from the RFC catalog, http://astrogeo.org/rfc, were used without permission from the copyright holder. The author admitted the decision to retract.

Biomass carbon micro/nano-structures derived from ramie fibers and corncobs as anode materials for lithium-ion and sodium-ion batteries

International Nuclear Information System (INIS)

Jiang, Qiang; Zhang, Zhenghao; Yin, Shengyu; Guo, Zaiping; Wang, Shiquan; Feng, Chuanqi

2016-01-01

Highlights: • Ramie fibers and corncobs are used as precursors to prepare the biomass carbons. • The ramie fiber carbon (RFC) took on morphology of 3D micro-rods. • The corncob carbon (CC) possessed a 2D nanosheets structure. • Both RFC and CC exhibited outstanding electrochemical performances in LIBs and SIBs systems. - Abstract: Three-dimensional (3D) rod-like carbon micro-structures derived from natural ramie fibers and two-dimensional (2D) carbon nanosheets derived from corncobs have been fabricated by heat treatment at 700 °C under argon atomsphere. The structure and morphology of the as-obtained ramie fiber carbon (RFC) and corncob carbon (CC) were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) technique. The electrochemical performances of the biomass carbon-based anode in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) were investigated. When tested as anode material for lithium ion batteries, both the RFC microrods and CC nanosheets exhibited high capacity, excellent rate capability, and stable cyclability. The specific capacity were still as high as 489 and 606 mAhg −1 after 180 cycles when cycled at room temperature in a 3.0–0.01 V potential (vs. Li/Li + ) window at current density of 100 mAg −1 , respectively, which are much higher than that of graphite (375 mAhg −1 ) under the same current density. Although the anodes in sodium ion batteries showed poorer specific capability than that in lithium-ion batteries, they still achieve a reversible sodium intercalation capacity of 122 and 139 mAhg −1 with similar cycling stability. The feature of stable cycling performance makes the biomass carbon derived from natural ramie fibers and corncobs to be promising candidates as electrodes in rechargeable sodium-ion batteries and lithium-ion batteries.

Identification of differentially expressed genes associated with the enhancement of X-ray susceptibility by RITA in a hypopharyngeal squamous cell carcinoma cell line (FaDu).

Science.gov (United States)

Luan, Jinwei; Li, Xianglan; Guo, Rutao; Liu, Shanshan; Luo, Hongyu; You, Qingshan

2016-06-01

Next generation sequencing and bio-informatic analyses were conducted to investigate the mechanism of reactivation of p53 and induction of tumor cell apoptosis (RITA)-enhancing X-ray susceptibility in FaDu cells. The cDNA was isolated from FaDu cells treated with 0 X-ray, 8 Gy X-ray, or 8 Gy X-ray + RITA. Then, cDNA libraries were created and sequenced using next generation sequencing, and each assay was repeated twice. Subsequently, differentially expressed genes (DEGs) were identified using Cuffdiff in Cufflinks and their functions were predicted by pathway enrichment analyses. Genes that were constantly up- or down-regulated in 8 Gy X-ray-treated FaDu cells and 8 Gy X-ray + RITA-treated FaDu cells were obtained as RITA genes. Afterward, the protein-protein interaction (PPI) relationships were obtained from the STRING database and a PPI network was constructed using Cytoscape. Furthermore, ClueGO was used for pathway enrichment analysis of genes in the PPI network. Total 2,040 and 297 DEGs were identified in FaDu cells treated with 8 Gy X-ray or 8 Gy X-ray + RITA, respectively. PARP3 and NEIL1 were enriched in base excision repair, and CDK1 was enriched in p53 signaling pathway. RFC2 and EZH2 were identified as RITA genes. In the PPI network, many interaction relationships were identified (e.g., RFC2-CDK1, EZH2-CDK1 and PARP3-EZH2). ClueGO analysis showed that RFC2 and EZH2 were related to cell cycle. RFC2, EZH2, CDK1, PARP3 and NEIL1 may be associated, and together enhance the susceptibility of FaDu cells treated with RITA to the deleterious effects of X-ray.

Identification of differentially expressed genes associated with the enhancement of X-ray susceptibility by RITA in a hypopharyngeal squamous cell carcinoma cell line (FaDu)

International Nuclear Information System (INIS)

Luan, Jinwei; Li, Xianglan; Guo, Rutao; Liu, Shanshan; Luo, Hongyu; You, Qingshan

2016-01-01

Next generation sequencing and bio-informatic analyses were conducted to investigate the mechanism of reactivation of p53 and induction of tumor cell apoptosis (RITA)-enhancing X-ray susceptibility in FaDu cells. The cDNA was isolated from FaDu cells treated with 0 X-ray, 8 Gy X-ray, or 8 Gy X-ray + RITA. Then, cDNA libraries were created and sequenced using next generation sequencing, and each assay was repeated twice. Subsequently, differentially expressed genes (DEGs) were identified using Cuffdiff in Cufflinks and their functions were predicted by pathway enrichment analyses. Genes that were constantly up- or down-regulated in 8 Gy X-ray-treated FaDu cells and 8 Gy X-ray + RITA-treated FaDu cells were obtained as RITA genes. Afterward, the protein-protein interaction (PPI) relationships were obtained from the STRING database and a PPI network was constructed using Cytoscape. Furthermore, ClueGO was used for pathway enrichment analysis of genes in the PPI network. Total 2,040 and 297 DEGs were identified in FaDu cells treated with 8 Gy X-ray or 8 Gy X-ray + RITA, respectively. PARP3 and NEIL1 were enriched in base excision repair, and CDK1 was enriched in p53 signaling pathway. RFC2 and EZH2 were identified as RITA genes. In the PPI network, many interaction relationships were identified (e.g., RFC2-CDK1, EZH2-CDK1 and PARP3-EZH2). ClueGO analysis showed that RFC2 and EZH2 were related to cell cycle. RFC2, EZH2, CDK1, PARP3 and NEIL1 may be associated, and together enhance the susceptibility of FaDu cells treated with RITA to the deleterious effects of X-ray

Biomass carbon micro/nano-structures derived from ramie fibers and corncobs as anode materials for lithium-ion and sodium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Jiang, Qiang; Zhang, Zhenghao [Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Ministry-of-Education Key Laboratory for Synthesis and Applications of Organic Functional Molecules, Hubei University, Wuhan 430062 (China); Yin, Shengyu [College of Environmental and Biological Engineering, Wuhan Technology and Business University, Wuhan 430065 (China); Guo, Zaiping [Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Ministry-of-Education Key Laboratory for Synthesis and Applications of Organic Functional Molecules, Hubei University, Wuhan 430062 (China); Institute for Superconducting & Electronic Materials, University of Wollongong, NSW 2522 (Australia); Wang, Shiquan [Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Ministry-of-Education Key Laboratory for Synthesis and Applications of Organic Functional Molecules, Hubei University, Wuhan 430062 (China); Feng, Chuanqi, E-mail: cfeng@hubu.edu.cn [Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials, Ministry-of-Education Key Laboratory for Synthesis and Applications of Organic Functional Molecules, Hubei University, Wuhan 430062 (China)

2016-08-30

Highlights: • Ramie fibers and corncobs are used as precursors to prepare the biomass carbons. • The ramie fiber carbon (RFC) took on morphology of 3D micro-rods. • The corncob carbon (CC) possessed a 2D nanosheets structure. • Both RFC and CC exhibited outstanding electrochemical performances in LIBs and SIBs systems. - Abstract: Three-dimensional (3D) rod-like carbon micro-structures derived from natural ramie fibers and two-dimensional (2D) carbon nanosheets derived from corncobs have been fabricated by heat treatment at 700 °C under argon atomsphere. The structure and morphology of the as-obtained ramie fiber carbon (RFC) and corncob carbon (CC) were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) technique. The electrochemical performances of the biomass carbon-based anode in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) were investigated. When tested as anode material for lithium ion batteries, both the RFC microrods and CC nanosheets exhibited high capacity, excellent rate capability, and stable cyclability. The specific capacity were still as high as 489 and 606 mAhg{sup −1} after 180 cycles when cycled at room temperature in a 3.0–0.01 V potential (vs. Li/Li{sup +}) window at current density of 100 mAg{sup −1}, respectively, which are much higher than that of graphite (375 mAhg{sup −1}) under the same current density. Although the anodes in sodium ion batteries showed poorer specific capability than that in lithium-ion batteries, they still achieve a reversible sodium intercalation capacity of 122 and 139 mAhg{sup −1} with similar cycling stability. The feature of stable cycling performance makes the biomass carbon derived from natural ramie fibers and corncobs to be promising candidates as electrodes in rechargeable sodium-ion batteries and lithium-ion batteries.

Developmental consequences of in utero sodium arsenate exposure in mice with folate transport deficiencies

International Nuclear Information System (INIS)

Spiegelstein, Ofer; Gould, Amy; Wlodarczyk, Bogdan; Tsie, Marlene; Lu Xiufen; Le, Chris; Troen, Aron; Selhub, Jacob; Piedrahita, Jorge A.; Salbaum, J. Michael; Kappen, Claudia; Melnyk, Stepan; James, Jill; Finnell, Richard H.

2005-01-01

Previous studies have demonstrated that mice lacking a functional folate binding protein 2 gene (Folbp2 -/- ) were significantly more sensitive to in utero arsenic exposure than were the wild-type mice similarly exposed. When these mice were fed a folate-deficient diet, the embryotoxic effect of arsenate was further exacerbated. Contrary to expectations, studies on 24-h urinary speciation of sodium arsenate did not demonstrate any significant difference in arsenic biotransformation between Folbp2 -/- and Folbp2 +/+ mice. To better understand the influence of folate pathway genes on arsenic embryotoxicity, the present investigation utilized transgenic mice with disrupted folate binding protein 1 (Folbp1) and reduced folate carrier (RFC) genes. Because complete inactivation of Folbp1 and RFC genes results in embryonic lethality, we used heterozygous animals. Overall, no RFC genotype-related differences in embryonic susceptibility to arsenic exposure were observed. Embryonic lethality and neural tube defect (NTD) frequency in Folbp1 mice was dose-dependent and differed from the RFC mice; however, no genotype-related differences were observed. The RFC heterozygotes tended to have higher plasma levels of S-adenosylhomocysteine (SAH) than did the wild-type controls, although this effect was not robust. It is concluded that genetic modifications at the Folbp1 and RFC loci confers no particular sensitivity to arsenic toxicity compared to wild-type controls, thus disproving the working hypothesis that decreased methylating capacity of the genetically modified mice would put them at increased risk for arsenic-induced reproductive toxicity

Mirror confinement systems: Final technical report

International Nuclear Information System (INIS)

1988-08-01

This report contains: (1) A discussion of azimuthal asymmetrics and fluctuations in RFC-XX-M. Both lead to enhanced radial transport in RFC-XX-M, and presumably most other tandem mirror machines as well; A report on four operating modes of RFC-XX-M which were developed and studied as part of the collaboration. These operating modes were the simple tandem mode, the negative (floating) potential mode, the hot electron mode, and the ECH (electron cyclotron heating) mode; A pulsed rf heated discharge cleaning system which was developed for RFC-XX-M. This method of cleaning proved much more effective than normal glow discharge cleaning, and variations of it are currently in use on the GAMMA-10 tandem mirror and the JIPP TII-U tokamak at the Institute for Plasma Physics at Nagoya; Short descriptions of the diagnostics development and improvement done in conjunction with the work on RFC-XX-M; and a compilation of the work performed at the University of Tsukuba on GAMMA-10. Most of the effort on GAMMA-10 involved diagnostics development and improvement. 16 refs., 42 figs., 1 tab

Intracellular and extracellular phosphatidylinositol 3-phosphate produced by Phytophthora species is important for infection.

Science.gov (United States)

Lu, Shan; Chen, Linlin; Tao, Kai; Sun, Nannan; Wu, Yuren; Lu, Xiaoxue; Wang, Yuanchao; Dou, Daolong

2013-09-01

RxLR effectors produced by Phytophthora pathogens have been proposed to bind to phosphatidylinositol 3-phosphate (PtdIns(3)P) to mediate their translocation into host cells and/or to increase their stability in planta. Since the levels of PtdIns(3)P in plants are low, we examined whether Phytophthora species may produce PtdIns(3)P to promote infection. We observed that PtdIns(3)P-specific GFP biosensors could bind to P. parasitica and P. sojae hyphae during infection of Nicotiana benthamiana leaves transiently secreting the biosensors, suggesting that the hyphae exposed PtdIns(3)P on their plasma membrane and/or secreted PtdIns(3)P. Silencing of the phosphatidylinositol 3-kinases (PI3K) genes, treatment with LY294002, or expression of PtdIns(3)P-binding proteins by P. sojae reduced the virulence of the pathogen on soybean, indicating that pathogen-synthesized PtdIns(3)P was required for full virulence. Secretion of PtdIns(3)P-binding proteins or of a PI3P-5-kinase by N. benthamiana leaves significantly increased the level of resistance to infection by P. parasitica and P. capsici. Together, our results support the hypothesis that Phytophthora species produce external PtdIns(3)P to aid in infection, such as to promote entry of RxLR effectors into host cells. Our results derived from P. sojae RxLR effector Avr1b confirm that both the N-terminus and the C-terminus of this effector can bind PtdIns(3)P.

DISE Summary Report (1992)

Science.gov (United States)

1994-03-01

Specification and Network Time Protocol(NTP) over the Implementation. RFC-o 119, Network OSI Remote Operations Service. RFC- Working Group, September...approximately ISIS implements a powerful model of 94% of the total computation time. distributed computation known as modelo Timing results are

Separation and properties of EA-rosette-forming lymphocytes in humans

NARCIS (Netherlands)

van Oers, M. H.; Zeijlemaker, W. P.; Schellekens, P. T.

1977-01-01

Human peripheral blood lymphocytes were separated into subpopulations enriched or depleted with respect to B lymphocytes (Ig-bearing cells), T lymphocytes, (cell forming rosettes with sheep erythrocytes: E-RFC) and Fc receptor-bearing lymphocytes (EA-RFC). From the distributions and recoveries of

Material Properties and Antimicrobial Activity of Polyhydroxybutyrate (PHB) Films Incorporated with Vanillin.

Science.gov (United States)

Xavier, Janifer Raj; Babusha, Sudalaimuthu Thangaraj; George, Johnsy; Ramana, Karna Venkata

2015-07-01

Polyhydroxybutyrate (PHB) was produced by Bacillus mycoides DFC 1, isolated from garden soil. Antimicrobial (AM) films of PHB were prepared by incorporating vanillin (4-hydroxy-3-methoxybenzaldehyde) from 10 to 200 μg/g of PHB. The films were assessed for antimicrobial activity against foodborne pathogens and spoilage bacteria comprising of Escherichia coli, Salmonella typhimurium, Shigella flexneri, and Staphylococcus aureus and fungi such as Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, Aspergillus parasiticus, Aspergillus ochraceus, Penicillium viridicatum, and Penicillium clavigerum. The minimum concentration of vanillin required to exhibit antimicrobial activity was ≥80 μg/g PHB for bacteria and ≥50 μg/g PHB for fungi. The PHB films with and without vanillin were studied for mechanical and thermal properties such as tensile strength, Young's modulus, percentage elongation to break, melting temperature, and heat of fusion. The thermal stability of the films was studied using thermogravimetric analysis. The release kinetics of vanillin into food matrices was also checked using food stimulants. The study is intended to find applications for PHB films containing vanillin to enhance the shelf life of foods in the form of biodegradable wrapper.

A desktop 3D printer with dual extruders to produce customised electronic circuitry

Science.gov (United States)

Butt, Javaid; Onimowo, Dominic Adaoiza; Gohrabian, Mohammed; Sharma, Tinku; Shirvani, Hassan

2018-03-01

3D printing has opened new horizons for the manufacturing industry in general, and 3D printers have become the tools for technological advancements. There is a huge divide between the pricing of industrial and desktop 3D printers with the former being on the expensive side capable of producing excellent quality products and latter being on the low-cost side with moderate quality results. However, there is a larger room for improvements and enhancements for the desktop systems as compared to the industrial ones. In this paper, a desktop 3D printer called Prusa Mendel i2 has been modified and integrated with an additional extruder so that the system can work with dual extruders and produce bespoke electronic circuits. The communication between the two extruders has been established by making use of the In-Chip Serial Programming port on the Arduino Uno controlling the printer. The biggest challenge is to control the flow of electric paint (to be dispensed by the new extruder) and CFD (Computational Fluid Dynamics) analysis has been carried out to ascertain the optimal conditions for proper dispensing. The final product is a customised electronic circuit with the base of plastic (from the 3D printer's extruder) and electronic paint (from the additional extruder) properly dispensed to create a live circuit on a plastic platform. This low-cost enhancement to a desktop 3D printer can provide a new prospect to produce multiple material parts where the additional extruder can be filled with any material that can be properly dispensed from its nozzle.

3-D magnetic reconnection in colliding laser-produced plasmas

Science.gov (United States)

Matteucci, Jackson; Fox, Will; Moissard, Clement; Bhattacharjee, Amitava

2017-10-01

Recent experiments have demonstrated magnetic reconnection between colliding plasma plumes, where the reconnecting magnetic fields were self-generated in the expanding laser-produced plasmas by the Biermann battery effect. Using fully kinetic 3-D particle in cell simulations, we conduct the first end-to-end simulations of these experiments, including self-consistent magnetic field generation via the Biermann effect through driven magnetic field reconnection. The simulations show rich, temporally and spatially dependent magnetic field reconnection. First, we find fast, vertically-localized ``Biermann-mediated reconnection,'' an inherently 3-D reconnection mechanism where the sign of the Biermann term reverses in the reconnection layer, destroying incoming flux and reconnecting flux downstream. Reconnection then transitions to fast, collisionless reconnection sustained by the non-gyrotropic pressure tensor. To separate out the role 3-D mechanisms, 2-D simulations are initialized based on reconnection-plane cuts of the 3-D simulations. These simulations demonstrate: (1) suppression of Biermann-mediated reconnection in 2-D; (2) similar efficacy of pressure tensor mechanisms in 2-D and 3-D; and (3) plasmoids develop in the reconnection layer in 2-D, where-as they are suppressed in 3-D. Supported by NDSEG Fellowship. This research used resources of the OLCF at ORNL, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC05-00OR22725.

Genetic and epigenetic alterations of the reduced folate carrier in untreated diffuse large B-cell lymphoma

DEFF Research Database (Denmark)

Kastrup, Ingelise Bjerring; Worm, Jesper; Ralfkiaer, Elisabeth

2007-01-01

The reduced folate carrier (RFC) is a transmembrane protein that mediates cellular uptake of reduced folates and antifolate drugs, including methotrexate (MTX). Acquired alterations of the RFC gene have been associated with resistance to MTX in cancer cell lines and primary osteosarcomas. Here, we...

Securing Voice over IP Conferencing with Decentralized Group Encryption

Science.gov (United States)

2007-09-04

exchanged using 1024 bit RSA encryption. Moreover, Skype allows encrypted conferences to take place as well. On this basis, Skype has a number of...32] Internet Engineering Task Force (IETF). RFC 768 : “User Datagram Protocol,” Aug 1980. [33] Internet Engineering Task Force (IETF). RFC 791

The value of feed consumption data for breeding in laying hens

NARCIS (Netherlands)

Luiting, P.

1991-01-01

The results of statistical and experimental analyses of residual feed consumption (RFC) in White Leghorn laying hens are presented. RFC is defined as the difference between the observed feed consumption of a hen and its feed consumption predicted from its egg mass production, body weight

IRIS TOXICOLOGICAL REVIEW AND SUMMARY ...

Science.gov (United States)

The Draft Toxicological Review was developed to evaluate both the cancer and non cancer human health risks from environmental exposure to vinyl chloride. A reference concentration (RfC), and a reference dose (RfD) were developed based upon induction of liver cell polymorphism in a chronic dietary study utilizing Wistar rats. An RfC of 1E-1 mg/m3 and an RfD of 5E-3 mg/kg-d are recommended. On the basis of sufficient evidence for carcinogenicity in human epidemiology studies vinyl chloride is reaffirmed to be a known human carcinogen. Cancer potencies were derived for oral and inhalation exposure. An oral slope factor of 1.3 per (mg/kg-day) for continuous exposure during adulthood and 2.5 per (mg/kg-day) for continuous lifetime exposure from birth, based upon a chronic dietary study in female Wistar rats is recommended; an inhalation unit risk of 4.3 E-6 per (55g/m3) for continuous exposure during adulthood and 8.7 E-6 per (55g/m3) for continuous lifetime exposure from birth is also recommended, based upon exposure of male and female Sprague Dawley rats and Swiss mice, via inhalation, for a lifetime. A PBPK model was used in the derivation of the RfC, RfD, and cancer potency estimates. Its use is based on the assumption that equal tissue concentrations of reactive metabolite, chlorethylene oxide or chloracetaldehyde, at the critical target site will result in equivalent toxicity between species.

Reduced folate carrier polymorphism determines methotrexate uptake by B cells and CD4+ T cells

DEFF Research Database (Denmark)

Baslund, B; Gregers, J; Nielsen, Claus Henrik

2008-01-01

To examine if polymorphism 80G --> A in the Reduced Folate Carrier (RFC) affects uptake of MTX in B- and CD4+ T-cells.......To examine if polymorphism 80G --> A in the Reduced Folate Carrier (RFC) affects uptake of MTX in B- and CD4+ T-cells....

Analysis of the capacity to produce IL-3 in murine AIDS

DEFF Research Database (Denmark)

Neuenschwander, A U; Marker, O; Thomsen, Allan Randrup

1994-01-01

Adult C57BL/6 mice infected with LP-BM5 murine leukaemia virus represent a model of murine AIDS (MAIDS). In this study we have analysed the capacity of CD4+ T cells from infected mice to produce IL-3 following stimulation with ConA for 24-72 h. In contrast to the position with IL-2, the production...

T-cell abnormalities after mediastinal irradiation for lung cancer. The in vitro influence of synthetic thymosin alpha-1

International Nuclear Information System (INIS)

Schulof, R.S.; Chorba, T.L.; Cleary, P.A.; Palaszynski, S.R.; Alabaster, O.; Goldstein, A.L.

1985-01-01

The effects of mediastinal irradiation (RT) on the numbers and functions of purified peripheral blood T-lymphocytes from patients with locally advanced non-small cell lung cancer were evaluated. The patients were candidates for a randomized trial to evaluate the immunorestorative properties of synthetic thymosin alpha-1. Twenty-one patients studied before RT did not exhibit any significant difference in T-cell numbers or function compared to age-matched healthy subjects. However, 41 patients studied within 1 week after completing RT exhibited significant depressions of E-rosette-forming cells at 4 degrees C (E4 degrees-RFC)/mm3, E-rosette-forming cells at 29 degrees C (E29 degrees-RFC)/mm3, OKT3/mm3, OKT4/mm3, and OKT8/mm3 (P . 0.0001); total T-cell percentages (%OKT3, P . 0.01); and T-cell proliferative responses in mixed lymphocyte cultures (MLR) (P . 0.01) and to the mitogen phytohemagglutinin under suboptimal conditions (P less than or equal to 0.03). Nine patients studied before and after RT showed a significant increase in OKT4/OKT8 (P . 0.01) following RT. A short-term in vitro incubation with thymosin alpha-1 could enhance MLR of T-cells in 12 of 27 patients with post-RT abnormalities. In 13 patients who were treated with placebo, the RT-induced depression of T-cell numbers and function persisted for at least 3 to 4 months. In addition, in 12 patients progressive decreases developed in %E4 degrees-RFC, %OKT3, %OKT4, and OKT4/OKT8, which always preceded clinical relapse

La2O3-reinforced W and W-V alloys produced by hot isostatic pressing

International Nuclear Information System (INIS)

Munoz, A.; Monge, M.A.; Savoini, B.; Rabanal, M.E.; Garces, G.; Pareja, R.

2011-01-01

W and W-V alloys reinforced with La 2 O 3 particles have been produced by MA and subsequent HIP at 1573 K and 195 MPa. The microstructure of the consolidated alloys has been characterized by scanning electron microscopy, energy dispersive spectroscopy analyses and X-ray diffraction. The mechanical properties were studied by nanoindentation measurements. The results show that practically full dense billets of W-V, W-V-La 2 O 3 and W-La 2 O 3 alloys can be produced. The microstructure analysis has shown that islands of V are present in W-V and W-V-1La 2 O 3 alloys. In W-1La 2 O 3 islands of La 2 O 3 are also present. The nanohardness of the W matrix increases with the addition of V, while decreases with the addition of La 2 O 3 .

CrossTalk. The Journal of Defense Software Engineering. Volume 27, Number 2. March/April 2014

Science.gov (United States)

2014-04-01

integrity and authenticity of the end product The Software Maintenance Group at Hill Air Force Base is recruiting civilians (U.S. Citizenship...B.Claise, “ Cisco Systems NetFlow Services Export Version 9”, October 2004, RFC 3954, <http://tools.ietf.org/html/rfc3954> 6. L. Daigle, “WHOIS

Comparison of acoustic fields produced by the original and upgraded HM-3 lithotripter

Science.gov (United States)

Zhou, Yufeng; Zhu, Songlin; Dreyer, Thomas; Liebler, Marko; Zhong, Pei

2003-10-01

To reduce tissue injury in shock wave lithotripsy (SWL) while maintaining satisfactory stone comminution, an original HM-3 lithotripter was upgraded by a reflector insert to suppress large intraluminal bubble expansion, which is a primary mechanism of vascular injury in SWL. The pressure waveforms produced by the original and upgraded HM-3 lithotripter were measured by using a fiber optical probe hydrophone (FOPH), which was scanned both along and transverse to the lithotripter axis at 1-mm step using a computer-controlled 3-D positioning system. At F2, the pressure waveform produced by the upgraded HM-3 lithotripter at 22 kV has a distinct dual-pulse structure, with a leading shock wave of ~45 MPa from the reflector insert and a 4-μs delayed second pulse of ~15 MPa reflected from the uncovered bottom surface of the original HM-3 reflector. The beam sizes of the original and upgraded HM-3 lithotripter are comparable in both axial and lateral directions. The pressure waveforms measured at the reflector aperture will be used as input to the KZK equation to predict the lithotripter shock wave at F2. Furthermore, bubble dynamics predicted by the Gilmore model will be compared with experimental observation by high-speed imaging. [Work supported by NIH.

77 FR 63418 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Science.gov (United States)

2012-10-16

... significant foreign narcotics traffickers as identified by the President. In addition, the Secretary of the..., Zapopan, Jalisco C.P. 45238, Mexico; Cancun, Quintana Roo, Mexico; R.F.C. SRC-080222-274 (Mexico) [SDNTK..., Guadalajara, Jalisco C.P. 44130, Mexico; R.F.C. UNI-031118-2I6 (Mexico) [SDNTK]. In addition, OFAC is...

Reduced folate carrier polymorphism determines methotrexate uptake by B cells and CD4+ T cellsTumor necrosis factor-alpha binding capacity and anti-infliximab antibodies measured by fluid-phase radioimmunoassays as predictors of clinical efficacy of infliximab in Crohn's disease

DEFF Research Database (Denmark)

Baslund, B.; Gregers, J.; Nielsen, Claus Henrik

2008-01-01

OBJECTIVE: To examine if polymorphism 80G --> A in the Reduced Folate Carrier (RFC) affects uptake of MTX in B- and CD4+ T-cells. METHODS: Mononuclear cells were isolated from peripheral blood of healthy persons. Real-time PCR was used to detect the RFC80 variants. FITC-labelled MTX was added to ...

Evaluation of 3D Printer Accuracy in Producing Fractal Structure.

Science.gov (United States)

Kikegawa, Kana; Takamatsu, Kyuuichirou; Kawakami, Masaru; Furukawa, Hidemitsu; Mayama, Hiroyuki; Nonomura, Yoshimune

2017-01-01

Hierarchical structures, also known as fractal structures, exhibit advantageous material properties, such as water- and oil-repellency as well as other useful optical characteristics, owing to its self-similarity. Various methods have been developed for producing hierarchical geometrical structures. Recently, fractal structures have been manufactured using a 3D printing technique that involves computer-aided design data. In this study, we confirmed the accuracy of geometrical structures when Koch curve-like fractal structures with zero to three generations were printed using a 3D printer. The fractal dimension was analyzed using a box-counting method. This analysis indicated that the fractal dimension of the third generation hierarchical structure was approximately the same as that of the ideal Koch curve. These findings demonstrate that the design and production of fractal structures can be controlled using a 3D printer. Although the interior angle deviated from the ideal value, the side length could be precisely controlled.

The association of reduced folate carrier 80G>A polymorphism to outcome in childhood acute lymphoblastic leukemia interacts with chromosome 21 copy number

DEFF Research Database (Denmark)

Gregers, Jannie; Christensen, Ib Jarle; Dalhoff, Kim

2010-01-01

with chromosome 21 copy number in the leukemic clone. A total of 500 children with acute lymphoblastic leukemia treated according to the common Nordic treatment protocols were included, and we found that the RFC AA variant was associated with a 50% better chance of staying in remission compared with GG or GA...... (platelet 73 vs 99/105 x 10(9)/L, P = .004, hemoglobin 5.6 vs 5.9/6.0 mmol/L, P = .004) and a higher degree of liver toxicity in patients with RFC GG variant (alanine aminotransferase 167 vs 127/124 U/L, P = .05). In conclusion, the RFC 80G>A polymorphism interacts with chromosome 21 copy numbers...

Reliable Internet Routing

Science.gov (United States)

2011-09-01

global coordination. IEEE/ACM Trans. Netw., 9(6):681–692, 2001. [39] S. Goldberg, D. Xiao, E. Tromer, B. Barak , and J. Rexford. Path-quality monitoring...RFC 4271). [81] Y. Rekhter, T. Li, and S. Hares. A border gateway protocol 4 (BGP-4), 2006. IETF RFC 4271. [82] E. Rosen , A. Viswanathan, and R. Callon

ANTIFUNGAL ACTIVITY OF VOLATILE COMPONENTS GENERATED BY ESSENTIAL OILS AGAINST THE GENUS PENICILLIUM ISOLATED FROM BAKERY PRODUCTS

Directory of Open Access Journals (Sweden)

Miroslava Císarová

2015-02-01

Full Text Available The aim of this study was evaluation of the antifungal activity of 5 essential oils (EOs. We concretely used thyme, clove, basil, jasmine and rosemary EOs by vapor contact against the fungal species, namely Penicillium citrinum, P. chrysogenum, P. hordei, P. citreonigrum, and P. viridicatum and their ability to affect production of mycotoxins. Each fungus was inoculated in the centre on Czapek Yeast Autolysate Agar (CYA dishes. Dishes were tightly sealed with parafilm and incubated for fourteen days at 25 ± 1 °C (three replicates were used for each treatment. Volatile phase effect of 50 μl of the essential oils was found to inhibit on growth of Penicillium spp.. Complete growth inhibition of the isolates by EOs of thyme and clove was observed. The EO of basil had antifungal effect on growth of P. citreonigrum only after 3rd and 7th day of the incubation at concentration 100 % of EO, like a P. viridicatum, which was inhibited by basil EO (100 % in comparison with control sets. Data was evaluated statistically by 95.0 % Tukey HSD test. In this study we also tested potentional effect of EOs to affect production of mycotoxins of tested Penicillium isolates which are potential toxigenic fungi. After 14 days of incubation with EOs (100 % with control sets, they were screened for a production of mycotoxins by TLC chromatography. Results showed non affecting production of mycotoxins by tested EOs. Conclusions indicate that volatile phase of combinations of thyme oil and clove oil showed good potential in the inhibition of growth of Penicillium spp. EOs should find a practical application in the inhibition of the fungal mycelial growth in some kind of the food.

Isolation of β-1,3-Glucanase-Producing Microorganisms from Poria cocos Cultivation Soil via Molecular Biology

Directory of Open Access Journals (Sweden)

Qiulan Wu

2018-06-01

Full Text Available β-1,3-Glucanase is considered as a useful enzymatic tool for β-1,3-glucan degradation to produce (1→3-linked β-glucan oligosaccharides with pharmacological activity properties. To validly isolate β-1,3-glucanase-producing microorganisms, the soil of Wolfiporia extensa, considered an environment rich in β-1,3-glucan-degrading microorganisms, was subjected to high throughput sequencing. The results demonstrated that the genera Streptomyces (1.90% and Arthrobacter (0.78% belonging to the order Actinomycetales (8.64% in the phylum Actinobacteria (18.64% were observed in soil for P. cocos cultivation (FTL1. Actinomycetes were considered as the candidates for isolation of glucan-degrading microorganisms. Out of 58 isolates, only 11 exhibited β-1,3-glucan-degrading activity. The isolate SYBCQL belonging to the genus Kitasatospora with β-1,3-glucan-degrading activity was found and reported for the first time and the isolate SYBC17 displayed the highest yield (1.02 U/mg among the isolates. To check the β-1,3-glucanase contribution to β-1,3-glucan-degrading activity, two genes, 17-W and 17-Q, encoding β-1,3-glucanase in SYBC17 and one gene QLK1 in SYBCQL were cloned and expressed for verification at the molecular level. Our findings collectively showed that the isolates able to secrete β-1,3-glucanase could be obtained with the assistance of high-throughput sequencing and genes expression analysis. These methods provided technical support for isolating β-1,3-glucanase-producing microorganisms.

Isolation and characterization of novel 1,3-propanediol-producing Lactobacillus panis PM1 from bioethanol thin stillage.

Science.gov (United States)

Khan, Nurul H; Kang, Tae Sun; Grahame, Douglas A S; Haakensen, Monique C; Ratanapariyanuch, Kornsulee; Reaney, Martin J; Korber, Darren R; Tanaka, Takuji

2013-01-01

Conversion of glycerol to 1,3-propanediol (1,3-PDO) is an attractive option to increase the economic efficiency of the biofuel industry. A bacterial strain that produced 1,3-PDO in the presence of glycerol was isolated from thin stillage, the fermentation residue of bioethanol production. This 1,3-PDO-producing organism was identified as Lactobacillus panis through biochemical characteristics and by 16S rRNA sequencing. Characterization of the L. panis strain hereafter designated as PM1 revealed it was an aerotolerant acidophilic anaerobe able to grow over a wide range of temperatures; tolerant to high concentrations of sodium chloride, ethanol, acetic acid, and lactic acid; and resistant to many common antibiotics. L. panis PM1 could utilize glucose, lactose, galactose, maltose, xylose, and arabinose, but could not grow on sucrose or fructose. Production of 1,3-PDO by L. panis PM1 occurred only when glucose was available as the carbon source in the absence of oxygen. These metabolic characteristics strongly suggested NADH recycling for glucose metabolism is achieved through 1,3-PDO production by this strain. These characteristics classified L. panis PM1 within the group III heterofermentative lactic acid bacteria, which includes the well-characterized 1,3-PDO-producing strain, Lactobacillus reuteri. Metabolite production profiles showed that L. panis PM1 produced considerable amounts of succinic acid (~11-12 mM) from normal MRS medium, which distinguishes this strain from L. reuteri strains.

Why Do Organisms in the Atlantic Ocean Produce So Much CaCO3?

Science.gov (United States)

Toggweiler, J. R.

2010-12-01

Sediments in the Atlantic are richer in CaCO3 than sediments in the other oceans. Sediment trap observations show that sinking particles in the Atlantic also tend to have more CaCO3 in relation to organic carbon than sinking particles elsewhere. The reason for the extra production of CaCO3 has never been very clear. The Atlantic is unusual because it receives much more than its share of the global input of river water. River water adds alkalinity to the surface ocean while the production of CaCO3 takes it away. In this presentation a new tracer, called Alk*, is derived from the surface alkalinity distribution to highlight the impact of river inputs and the production of CaCO3. If the production of CaCO3 were evenly distributed across the ocean one would expect the Atlantic to have a higher level of Alk* becaused of its river inputs. We find instead that Alk* is lower in the middle of the Atlantic than almost any place else. This, of course, is consistent with the fact that organisms in the Atlantic produce a lot of CaCO3. Comparison with other areas with especially low values of Alk* (Red Sea and northern Arabian Sea) shows that the production of CaCO3 is highly correlated across the ocean with the surface salinity. Hence, we argue that organisms in the Atlantic produce a lot of CaCO3 simply because the Atlantic is so salty. Salty waters, by definition, have more CO3= ions, which increase the supersaturation with respect to calcite and aragonite. This finding, while extremely simple, has major implifications for the impact of ocean acidification on calcifying organisms.

Thermal annealing behaviour of sulphur-35 produced in pile-irradiated mixed crystals AlCl/sub 3/-FeCl/sub 3/

Energy Technology Data Exchange (ETDEWEB)

Dyakovich, V; Todorovski, D S; Kostadinova, Z D [Sofia Univ. (Bulgaria). Khimicheski Fakultet

1983-12-19

The regression analysis of the experimental results on the thermal annealing behaviour of /sup 35/S produced in pile-irradiated mixed crystals AlCl/sub 3/-FeCl/sub 3/ confirms some suppositions made in a previous paper. The chemical state of /sup 35/S is defined by the target prehistory and the iron concentration. The influence of Fe/sup 3 +/ can be observed indirectly through its influence on the defect structure formed.

15 CFR 714.1 - Annual declaration requirements for plant sites that produce a Schedule 3 chemical in excess of...

Science.gov (United States)

2010-01-01

... plant sites that produce a Schedule 3 chemical in excess of 30 metric tons. 714.1 Section 714.1 Commerce... SCHEDULE 3 CHEMICALS § 714.1 Annual declaration requirements for plant sites that produce a Schedule 3... in the production of a chemical in any units within the same plant through chemical reaction...

Observation of scattered light between omega/2 and 3/2 omega in short wavelength laser produced plasmas

International Nuclear Information System (INIS)

Goldman, L.M.; Seka, W.; Tanaka, K.; Simon, A.; Short, R.

1984-01-01

Extensive measurements have been carried out on scattered radiation in the spectral region between omega/2 and 3/2 omega from plasmas produced by 351 nm lasers. The relative intensities of the continuum radiation relative to the line features at omega/2 and 3/2 omega will be shown. A new spectral feature has been observed between 3/2 omega and omega which may be interpreted as an upscattered component produced by ordinary Raman scattering. The overall experimental evidence for ordinary Raman scattering vs stimulated Raman scattering will be discussed

, 26-ESKADER R.F.C.

African Journals Online (AJOL)

Cripps, Hinshelwood, Wood, Hewitt, Carey-Thomas,. Power en Driver toegestaan kan word. Hulle moetewenwel onmiddellik gereed wees om verdere opdragte te ontvang. Indien hulle 'nie as vrywilligers wiI aansluit nie, kan hulle ontslaan word. ,',. Scientia Militaria, South African Journal of Military Studies, Vol 2 Nr 2, 1970.

Topological, chemical and electro-optical characteristics of riboflavin-doped artificial and natural DNA thin films

Science.gov (United States)

Gnapareddy, Bramaramba; Dugasani, Sreekantha Reddy; Son, Junyoung; Park, Sung Ha

2018-02-01

DNA is considered as a useful building bio-material, and it serves as an efficient template to align functionalized nanomaterials. Riboflavin (RF)-doped synthetic double-crossover DNA (DX-DNA) lattices and natural salmon DNA (SDNA) thin films were constructed using substrate-assisted growth and drop-casting methods, respectively, and their topological, chemical and electro-optical characteristics were evaluated. The critical doping concentrations of RF ([RF]C, approx. 5 mM) at given concentrations of DX-DNA and SDNA were obtained by observing the phase transition (from crystalline to amorphous structures) of DX-DNA and precipitation of SDNA in solution above [RF]C. [RF]C are verified by analysing the atomic force microscopy images for DX-DNA and current, absorbance and photoluminescence (PL) for SDNA. We study the physical characteristics of RF-embedded SDNA thin films, using the Fourier transform infrared spectrum to understand the interaction between the RF and DNA molecules, current to evaluate the conductance, absorption to understand the RF binding to the DNA and PL to analyse the energy transfer between the RF and DNA. The current and UV absorption band of SDNA thin films decrease up to [RF]C followed by an increase above [RF]C. By contrast, the PL intensity illustrates the reverse trend, as compared to the current and UV absorption behaviour as a function of the varying [RF]. Owing to the intense PL characteristic of RF, the DNA lattices and thin films with RF might offer immense potential to develop efficient bio-sensors and useful bio-photonic devices.

Effect of refined functional carbohydrates from enzymatically hydrolyzed yeast on the presence of Salmonella spp. in the ceca of broiler breeder females.

Science.gov (United States)

Walker, G K; Jalukar, S; Brake, J

2017-08-01

Broiler breeders hatched from Salmo-nella negative grandparents received either zero or 50 g/MT of refined functional carbohydrates (RFC) in their diets from d of placement to end of lay. There were no other treatments used. Pullets and cockerels were reared separately in an enclosed litter-floor house to 21 wk of age when 28 randomly selected pullets from each diet were transferred to individual cages for an additional 14 d before they were killed, and their ceca were excised aseptically and tested for Salmonella spp. The remaining birds were transferred to a two-thirds slat and one-third litter curtain-sided laying house. There were 8 pens of 60 to 65 females and 8 to 18 males, depending upon flock age and housing type, fed each diet, and there was no effort made to isolate pens from typical daily foot traffic between pens. At 51 wk of age, male progeny broiler chicks were hatched and received either zero or 50 g/MT of RFC to complete a 2 × 2 design with 4 replicate pens of 12 males per interaction. All broilers were tested for cecal Salmonella spp. at 34 d of age. Ceca were collected from 30 breeder hens from each treatment at 64 wk of age and tested for Salmonella spp. Of the ceca sampled at 23 wk from the control pullets, 71.4% were found to contain Salmonella spp., while none of the ceca from the RFC pullets tested positive. Of the ceca sampled from the control hens at 64 wk, 40% were found to contain Salmonella spp., while none of the ceca from the RFC hens tested positive. Salmonella spp. was isolated from broilers in one pen of the control broilers that were also progeny of control breeders out of 4 replicates but not from any pens in which the breeders had been fed RFC. These data demonstrated that RFC reduced natural Salmonella spp. colonization of broiler breeder hen and broiler progeny ceca during a complete production cycle. © 2017 Poultry Science Association Inc.

Environmental controls for the precipitation of different fibrous calcite cement fabrics

Science.gov (United States)

Ritter, Ann-Christine; Wiethoff, Felix; Neuser, Rolf D.; Richter, Detlev K.; Immenhauser, Adrian

2016-04-01

Abiogenic calcite cements are widely used as climate archives. They can yield information on environmental change and climate dynamics at the time when the sediment was lithified in a (marine) diagenetic environment. Radiaxial-fibrous (RFC) and fascicular-optic fibrous (FOFC) calcite cements are two very common and similar pore-filling cement fabrics in Palaeozoic and Mesozoic carbonate rocks (Richter et al., 2011) and in Holocene Mg-calcitic speleothems (Richter et al., 2015). Both fabrics are characterised by distinct crystallographic properties. Current research has shown that these fabrics are often underexplored and that a careful combination of conservative and innovative proxies allows for a better applicability of these carbonate archives to paleoenvironmental reconstructions (Ritter et al., 2015). A main uncertainty in this context is that it is still poorly understood which parameters lead to the formation of either RFC or FOFC and if differential crystallographic parameters affect proxy data from these fabrics. This study aims at a better understanding of the environmental factors that may control either RFC or FOFC precipitation. Therefore, suitable samples (a stalagmite and a Triassic marine cement succession), each with clearly differentiable layers of RFC and FOFC, were identified and analysed in high detail using a multi-proxy approach. Detailed thin section and cathodoluminescence analysis of the samples allowed for a precise identification of layers consisting solely of either RFC or FOFC. Isotopic (δ13C, δ18O) as well as trace elemental compositions have been determined and the comparison of data obtained from these different carbonate archives sheds light on changes in environmental parameters during RFC or FOFC precipitation. References: Richter, D.K., et al., 2011. Radiaxial-fibrous calcites: A new look at an old problem. Sedimentary Geology, 239, 26-36 Richter, D.K., et al., 2015. Radiaxial-fibrous and fascicular-optic Mg-calcitic cave

Lifetime and quenching of CO /a super 3 pi/ produced by recombination of CO2 ions in a helium afterglow.

Science.gov (United States)

Wauchop, T. S.; Broida, H. P.

1972-01-01

Demonstration that rapid dissociative recombination of CO2(+) in a flowing, helium afterglow is an efficient source of CO in the a super 3 pi metastable state. Ions produced by mixing CO2 with He(2 super 3 S) recombine to produce a CO metastable afterglow with a number density as great as 10 to the 9th per sq cm. Monitoring of the (a super 3 pi-X super 1 sigma) Cameron transition in CO was used to study the lifetime and quenching of CO (a super 3 pi) by CO2, N2, NO, and He. Recombination of CO2(+) also produces CO in the d super 3 delta and a' super 3 sigma states.

A customized bolus produced using a 3-dimensional printer for radiotherapy.

Directory of Open Access Journals (Sweden)

Shin-Wook Kim

Full Text Available OBJECTIVE: Boluses are used in high-energy radiotherapy in order to overcome the skin sparing effect. In practice though, commonly used flat boluses fail to make a perfect contact with the irregular surface of the patient's skin, resulting in air gaps. Hence, we fabricated a customized bolus using a 3-dimensional (3D printer and evaluated its feasibility for radiotherapy. METHODS: We designed two kinds of bolus for production on a 3D printer, one of which was the 3D printed flat bolus for the Blue water phantom and the other was a 3D printed customized bolus for the RANDO phantom. The 3D printed flat bolus was fabricated to verify its physical quality. The resulting 3D printed flat bolus was evaluated by assessing dosimetric parameters such as D1.5 cm, D5 cm, and D10 cm. The 3D printed customized bolus was then fabricated, and its quality and clinical feasibility were evaluated by visual inspection and by assessing dosimetric parameters such as Dmax, Dmin, Dmean, D90%, and V90%. RESULTS: The dosimetric parameters of the resulting 3D printed flat bolus showed that it was a useful dose escalating material, equivalent to a commercially available flat bolus. Analysis of the dosimetric parameters of the 3D printed customized bolus demonstrated that it is provided good dose escalation and good contact with the irregular surface of the RANDO phantom. CONCLUSIONS: A customized bolus produced using a 3D printer could potentially replace commercially available flat boluses.

A customized bolus produced using a 3-dimensional printer for radiotherapy.

Science.gov (United States)

Kim, Shin-Wook; Shin, Hun-Joo; Kay, Chul Seung; Son, Seok Hyun

2014-01-01

Boluses are used in high-energy radiotherapy in order to overcome the skin sparing effect. In practice though, commonly used flat boluses fail to make a perfect contact with the irregular surface of the patient's skin, resulting in air gaps. Hence, we fabricated a customized bolus using a 3-dimensional (3D) printer and evaluated its feasibility for radiotherapy. We designed two kinds of bolus for production on a 3D printer, one of which was the 3D printed flat bolus for the Blue water phantom and the other was a 3D printed customized bolus for the RANDO phantom. The 3D printed flat bolus was fabricated to verify its physical quality. The resulting 3D printed flat bolus was evaluated by assessing dosimetric parameters such as D1.5 cm, D5 cm, and D10 cm. The 3D printed customized bolus was then fabricated, and its quality and clinical feasibility were evaluated by visual inspection and by assessing dosimetric parameters such as Dmax, Dmin, Dmean, D90%, and V90%. The dosimetric parameters of the resulting 3D printed flat bolus showed that it was a useful dose escalating material, equivalent to a commercially available flat bolus. Analysis of the dosimetric parameters of the 3D printed customized bolus demonstrated that it is provided good dose escalation and good contact with the irregular surface of the RANDO phantom. A customized bolus produced using a 3D printer could potentially replace commercially available flat boluses.

Experimental considerations on producing highly polarized liquid 3He in a matrix of solid 4He

International Nuclear Information System (INIS)

Greenberg, A.S.; Hebral, B.; Papoular, M.; Beal-Monod, M.T.

1980-01-01

Two experiments are briefly reviewed in which droplets of 3 He were formed in solid 4 He. These experiments indicate such conditions are favorable for the production of quasi-stable highly polarized liquid 3 He. A solid solution of dilute 3 He in 4 He is proposed as a promising system to produce experimentally realizable highly polarized liquid 3 He using the Castaing-Nozieres decompression

78 FR 8702 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to the Foreign...

Science.gov (United States)

2013-02-06

.... DONO MORALES, Edman Manuel, Privada Niza 3617 Int. 2, Colonia Playas de Tijuana, Tijuana, Baja...; R.F.C. QUHM-701022-TL3 (Mexico) (individual) [SDNTK]. 14. RUELAS MARTINEZ, Jose Manuel, 402... (individual) [SDNTK]. 16. RUELAS MARTINEZ, Jose de la Cruz, Calle de la Ventisca 640, Colonia Playas Seccion...

La{sub 2}O{sub 3}-reinforced W and W-V alloys produced by hot isostatic pressing

Energy Technology Data Exchange (ETDEWEB)

Munoz, A., E-mail: angel.munoz@uc3m.es [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain); Monge, M.A., E-mail: mmonge@fis.uc3m.es [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain); Savoini, B., E-mail: bsavoi@fis.uc3m.es [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain); Rabanal, M.E., E-mail: eugenia@ing.uc3m.es [Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Universidad Carlos III de Madrid, 28911 Leganes (Spain); Garces, G., E-mail: ggarces@cenim.csic.es [Centro Nacional de Investigaciones Melaturgicas, CENIM, 28040 Madrid (Spain); Pareja, R., E-mail: rpp@fis.uc3m.es [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain)

2011-10-01

W and W-V alloys reinforced with La{sub 2}O{sub 3} particles have been produced by MA and subsequent HIP at 1573 K and 195 MPa. The microstructure of the consolidated alloys has been characterized by scanning electron microscopy, energy dispersive spectroscopy analyses and X-ray diffraction. The mechanical properties were studied by nanoindentation measurements. The results show that practically full dense billets of W-V, W-V-La{sub 2}O{sub 3} and W-La{sub 2}O{sub 3} alloys can be produced. The microstructure analysis has shown that islands of V are present in W-V and W-V-1La{sub 2}O{sub 3} alloys. In W-1La{sub 2}O{sub 3} islands of La{sub 2}O{sub 3} are also present. The nanohardness of the W matrix increases with the addition of V, while decreases with the addition of La{sub 2}O{sub 3}.

Estudo comparativo de três métodos de diagnóstico para detecção de anticorpos anti-Theileria equi em eqüinos de áreas endêmicas do estado do Rio de Janeiro

Directory of Open Access Journals (Sweden)

Tiago Marques dos Santos

2009-12-01

Full Text Available Este trabalho teve o objetivo de avaliar a reação de imunofluorescência indireta (RIFI, ensaio imunoenzimático (ELISA e a reação de fixação do complemento (RFC no diagnóstico de Theileria equi em amostras de soro de 79 equinos na Universidade Federal Rural do Rio de Janeiro (UFRRJ, Seropédica, RJ, Brasil. Houve reação positiva para Theileria equi em 74,7, 75,9 e 60,8% das amostras testadas pela RIFI, ELISA e RFC, respectivamente. Observou-se discrepância em 16,45% (n=13 das amostras de soro testadas pelo ELISA indireto e RIFI. Quando comparado a RIFI e a RFC, a discrepância observada entre os soros testados foi de 36,70% (n=29. O teste ELISA indireto e a RFC apresentaram discordância em 37,97% (n=30 das amostras de soros. Os resultados do presente estudo sugerem que a melhor alternativa para o diagnóstico sorológico de T. equi em eqüinos portadores é a associação dos testes de RIFI e ELISA indireto, especialmente para a realização de estudos soroepidemiológicos.

Secure and QoS-Managed Information Exchange Between Enterprise and Constrained Environments

Science.gov (United States)

2014-01-01

reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching...existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this...August 2008, RFC 5246, http://tools.ietf.org/html/rfc5246. [6] Fossi, M., Egan, G., Haley, K., Johnson, E., Mack, T., Adams, T., Blackbird , J., Low, M.K

Hydrogen-Oxygen PEM Regenerative Fuel Cell at NASA Glenn Research Center

Science.gov (United States)

Bents, David J.

2004-01-01

The NASA Glenn Research Center has constructed a closed-cycle hydrogen-oxygen PEM regenerative fuel cell (RFC) to explore its potential use as an energy storage device for a high altitude solar electric aircraft. Built up over the last 2 years from specialized hardware and off the shelf components the Glenn RFC is a complete "brassboard" energy storage system which includes all the equipment required to (1) absorb electrical power from an outside source and store it as pressurized hydrogen and oxygen and (2) make electrical power from the stored gases, saving the product water for re-use during the next cycle. It consists of a dedicated hydrogen-oxygen fuel cell stack and an electrolyzer stack, the interconnecting plumbing and valves, cooling pumps, water transfer pumps, gas recirculation pumps, phase separators, storage tanks for oxygen (O2) and hydrogen (H2), heat exchangers, isolation valves, pressure regulators, nitrogen purge provisions, instrumentation, and other components. It specific developmental functions include: (1) Test fuel cells and fuel cell components under repeated closed-cycle operation (nothing escapes; everything is used over and over again). (2) Simulate diurnal charge-discharge cycles (3) Observe long-term system performance and identify degradation and loss mechanisms. (4) Develop safe and convenient operation and control strategies leading to the successful development of mission-capable, flight-weight RFC's.

Activation of Saccharomyces cerevisiae Mlh1-Pms1 Endonuclease in a Reconstituted Mismatch Repair System*

Science.gov (United States)

Smith, Catherine E.; Bowen, Nikki; Graham, William J.; Goellner, Eva M.; Srivatsan, Anjana; Kolodner, Richard D.

2015-01-01

Previous studies reported the reconstitution of an Mlh1-Pms1-independent 5′ nick-directed mismatch repair (MMR) reaction using Saccharomyces cerevisiae proteins. Here we describe the reconstitution of a mispair-dependent Mlh1-Pms1 endonuclease activation reaction requiring Msh2-Msh6 (or Msh2-Msh3), proliferating cell nuclear antigen (PCNA), and replication factor C (RFC) and a reconstituted Mlh1-Pms1-dependent 3′ nick-directed MMR reaction requiring Msh2-Msh6 (or Msh2-Msh3), exonuclease 1 (Exo1), replication protein A (RPA), RFC, PCNA, and DNA polymerase δ. Both reactions required Mg2+ and Mn2+ for optimal activity. The MMR reaction also required two reaction stages in which the first stage required incubation of Mlh1-Pms1 with substrate DNA, with or without Msh2-Msh6 (or Msh2-Msh3), PCNA, and RFC but did not require nicking of the substrate, followed by a second stage in which other proteins were added. Analysis of different mutant proteins demonstrated that both reactions required a functional Mlh1-Pms1 endonuclease active site, as well as mispair recognition and Mlh1-Pms1 recruitment by Msh2-Msh6 but not sliding clamp formation. Mutant Mlh1-Pms1 and PCNA proteins that were defective for Exo1-independent but not Exo1-dependent MMR in vivo were partially defective in the Mlh1-Pms1 endonuclease and MMR reactions, suggesting that both reactions reflect the activation of Mlh1-Pms1 seen in Exo1-independent MMR in vivo. The availability of this reconstituted MMR reaction should now make it possible to better study both Exo1-independent and Exo1-dependent MMR. PMID:26170454

Activation of Saccharomyces cerevisiae Mlh1-Pms1 Endonuclease in a Reconstituted Mismatch Repair System.

Science.gov (United States)

Smith, Catherine E; Bowen, Nikki; Graham, William J; Goellner, Eva M; Srivatsan, Anjana; Kolodner, Richard D

2015-08-28

Previous studies reported the reconstitution of an Mlh1-Pms1-independent 5' nick-directed mismatch repair (MMR) reaction using Saccharomyces cerevisiae proteins. Here we describe the reconstitution of a mispair-dependent Mlh1-Pms1 endonuclease activation reaction requiring Msh2-Msh6 (or Msh2-Msh3), proliferating cell nuclear antigen (PCNA), and replication factor C (RFC) and a reconstituted Mlh1-Pms1-dependent 3' nick-directed MMR reaction requiring Msh2-Msh6 (or Msh2-Msh3), exonuclease 1 (Exo1), replication protein A (RPA), RFC, PCNA, and DNA polymerase δ. Both reactions required Mg(2+) and Mn(2+) for optimal activity. The MMR reaction also required two reaction stages in which the first stage required incubation of Mlh1-Pms1 with substrate DNA, with or without Msh2-Msh6 (or Msh2-Msh3), PCNA, and RFC but did not require nicking of the substrate, followed by a second stage in which other proteins were added. Analysis of different mutant proteins demonstrated that both reactions required a functional Mlh1-Pms1 endonuclease active site, as well as mispair recognition and Mlh1-Pms1 recruitment by Msh2-Msh6 but not sliding clamp formation. Mutant Mlh1-Pms1 and PCNA proteins that were defective for Exo1-independent but not Exo1-dependent MMR in vivo were partially defective in the Mlh1-Pms1 endonuclease and MMR reactions, suggesting that both reactions reflect the activation of Mlh1-Pms1 seen in Exo1-independent MMR in vivo. The availability of this reconstituted MMR reaction should now make it possible to better study both Exo1-independent and Exo1-dependent MMR. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

A novel methodology to model the cooling processes of packed horticultural produce using 3D shape models

Science.gov (United States)

Gruyters, Willem; Verboven, Pieter; Rogge, Seppe; Vanmaercke, Simon; Ramon, Herman; Nicolai, Bart

2017-10-01

Freshly harvested horticultural produce require a proper temperature management to maintain their high economic value. Towards this end, low temperature storage is of crucial importance to maintain a high product quality. Optimizing both the package design of packed produce and the different steps in the postharvest cold chain can be achieved by numerical modelling of the relevant transport phenomena. This work presents a novel methodology to accurately model both the random filling of produce in a package and the subsequent cooling process. First, a cultivar-specific database of more than 100 realistic CAD models of apple and pear fruit is built with a validated geometrical 3D shape model generator. To have an accurate representation of a realistic picking season, the model generator also takes into account the biological variability of the produce shape. Next, a discrete element model (DEM) randomly chooses surface meshed bodies from the database to simulate the gravitational filling process of produce in a box or bin, using actual mechanical properties of the fruit. A computational fluid dynamics (CFD) model is then developed with the final stacking arrangement of the produce to study the cooling efficiency of packages under several conditions and configurations. Here, a typical precooling operation is simulated to demonstrate the large differences between using actual 3D shapes of the fruit and an equivalent spheres approach that simplifies the problem drastically. From this study, it is concluded that using a simplified representation of the actual fruit shape may lead to a severe overestimation of the cooling behaviour.

Novel Poly[(R-3-Hydroxybutyrate]-Producing Bacterium Isolated from a Bolivian Hypersaline Lake

Directory of Open Access Journals (Sweden)

María Soledad Marqués-Calvo

2013-01-01

Full Text Available Poly[(R-3-hydroxybutyrate] (PHB constitutes a biopolymer synthesized from renewable resources by various microorganisms. This work focuses on finding a new PHB-producing bacterium capable of growing in conventional media used for industrial biopolymer production, its taxonomical identification, and characterization of its biopolymer. Thus, a bacterial isolation process was carried out from environmental samples of water and mud. Among the isolates, strain S29 was selected and used in a fed-batch fermentation to generate a biopolymer. This biopolymer was recovered and identified as PHB homopolymer. Surprisingly, it featured several fractions of different molecular masses, and thermal properties unusual for PHB. Hence, the microorganism S29, genetically identified as a new strain of Bacillus megaterium, proved to be interesting not only due to its growth and PHB accumulation kinetics under the investigated cultivation conditions, but also due to the thermal properties of the produced PHB.

GPU-based relative fuzzy connectedness image segmentation

International Nuclear Information System (INIS)

Zhuge Ying; Ciesielski, Krzysztof C.; Udupa, Jayaram K.; Miller, Robert W.

2013-01-01

Purpose:Recently, clinical radiological research and practice are becoming increasingly quantitative. Further, images continue to increase in size and volume. For quantitative radiology to become practical, it is crucial that image segmentation algorithms and their implementations are rapid and yield practical run time on very large data sets. The purpose of this paper is to present a parallel version of an algorithm that belongs to the family of fuzzy connectedness (FC) algorithms, to achieve an interactive speed for segmenting large medical image data sets. Methods: The most common FC segmentations, optimizing an ℓ ∞ -based energy, are known as relative fuzzy connectedness (RFC) and iterative relative fuzzy connectedness (IRFC). Both RFC and IRFC objects (of which IRFC contains RFC) can be found via linear time algorithms, linear with respect to the image size. The new algorithm, P-ORFC (for parallel optimal RFC), which is implemented by using NVIDIA’s Compute Unified Device Architecture (CUDA) platform, considerably improves the computational speed of the above mentioned CPU based IRFC algorithm. Results: Experiments based on four data sets of small, medium, large, and super data size, achieved speedup factors of 32.8×, 22.9×, 20.9×, and 17.5×, correspondingly, on the NVIDIA Tesla C1060 platform. Although the output of P-ORFC need not precisely match that of IRFC output, it is very close to it and, as the authors prove, always lies between the RFC and IRFC objects. Conclusions: A parallel version of a top-of-the-line algorithm in the family of FC has been developed on the NVIDIA GPUs. An interactive speed of segmentation has been achieved, even for the largest medical image data set. Such GPU implementations may play a crucial role in automatic anatomy recognition in clinical radiology.

GPU-based relative fuzzy connectedness image segmentation

Energy Technology Data Exchange (ETDEWEB)

Zhuge Ying; Ciesielski, Krzysztof C.; Udupa, Jayaram K.; Miller, Robert W. [Radiation Oncology Branch, National Cancer Institute, National Institutes of Health, Bethesda, Maryland 20892 (United States); Department of Mathematics, West Virginia University, Morgantown, West Virginia 26506 (United States) and Medical Image Processing Group, Department of Radiology, University of Pennsylvania, Philadelphia, Pennsylvania 19104 (United States); Medical Image Processing Group, Department of Radiology, University of Pennsylvania, Philadelphia, Pennsylvania 19104 (United States); Radiation Oncology Branch, National Cancer Institute, National Institutes of Health, Bethesda, Maryland 20892 (United States)

2013-01-15

Purpose:Recently, clinical radiological research and practice are becoming increasingly quantitative. Further, images continue to increase in size and volume. For quantitative radiology to become practical, it is crucial that image segmentation algorithms and their implementations are rapid and yield practical run time on very large data sets. The purpose of this paper is to present a parallel version of an algorithm that belongs to the family of fuzzy connectedness (FC) algorithms, to achieve an interactive speed for segmenting large medical image data sets. Methods: The most common FC segmentations, optimizing an Script-Small-L {sub {infinity}}-based energy, are known as relative fuzzy connectedness (RFC) and iterative relative fuzzy connectedness (IRFC). Both RFC and IRFC objects (of which IRFC contains RFC) can be found via linear time algorithms, linear with respect to the image size. The new algorithm, P-ORFC (for parallel optimal RFC), which is implemented by using NVIDIA's Compute Unified Device Architecture (CUDA) platform, considerably improves the computational speed of the above mentioned CPU based IRFC algorithm. Results: Experiments based on four data sets of small, medium, large, and super data size, achieved speedup factors of 32.8 Multiplication-Sign , 22.9 Multiplication-Sign , 20.9 Multiplication-Sign , and 17.5 Multiplication-Sign , correspondingly, on the NVIDIA Tesla C1060 platform. Although the output of P-ORFC need not precisely match that of IRFC output, it is very close to it and, as the authors prove, always lies between the RFC and IRFC objects. Conclusions: A parallel version of a top-of-the-line algorithm in the family of FC has been developed on the NVIDIA GPUs. An interactive speed of segmentation has been achieved, even for the largest medical image data set. Such GPU implementations may play a crucial role in automatic anatomy recognition in clinical radiology.

GPU-based relative fuzzy connectedness image segmentation.

Science.gov (United States)

Zhuge, Ying; Ciesielski, Krzysztof C; Udupa, Jayaram K; Miller, Robert W

2013-01-01

Recently, clinical radiological research and practice are becoming increasingly quantitative. Further, images continue to increase in size and volume. For quantitative radiology to become practical, it is crucial that image segmentation algorithms and their implementations are rapid and yield practical run time on very large data sets. The purpose of this paper is to present a parallel version of an algorithm that belongs to the family of fuzzy connectedness (FC) algorithms, to achieve an interactive speed for segmenting large medical image data sets. The most common FC segmentations, optimizing an [script-l](∞)-based energy, are known as relative fuzzy connectedness (RFC) and iterative relative fuzzy connectedness (IRFC). Both RFC and IRFC objects (of which IRFC contains RFC) can be found via linear time algorithms, linear with respect to the image size. The new algorithm, P-ORFC (for parallel optimal RFC), which is implemented by using NVIDIA's Compute Unified Device Architecture (CUDA) platform, considerably improves the computational speed of the above mentioned CPU based IRFC algorithm. Experiments based on four data sets of small, medium, large, and super data size, achieved speedup factors of 32.8×, 22.9×, 20.9×, and 17.5×, correspondingly, on the NVIDIA Tesla C1060 platform. Although the output of P-ORFC need not precisely match that of IRFC output, it is very close to it and, as the authors prove, always lies between the RFC and IRFC objects. A parallel version of a top-of-the-line algorithm in the family of FC has been developed on the NVIDIA GPUs. An interactive speed of segmentation has been achieved, even for the largest medical image data set. Such GPU implementations may play a crucial role in automatic anatomy recognition in clinical radiology.

GPU-based relative fuzzy connectedness image segmentation

Science.gov (United States)

Zhuge, Ying; Ciesielski, Krzysztof C.; Udupa, Jayaram K.; Miller, Robert W.

2013-01-01

Purpose: Recently, clinical radiological research and practice are becoming increasingly quantitative. Further, images continue to increase in size and volume. For quantitative radiology to become practical, it is crucial that image segmentation algorithms and their implementations are rapid and yield practical run time on very large data sets. The purpose of this paper is to present a parallel version of an algorithm that belongs to the family of fuzzy connectedness (FC) algorithms, to achieve an interactive speed for segmenting large medical image data sets. Methods: The most common FC segmentations, optimizing an ℓ∞-based energy, are known as relative fuzzy connectedness (RFC) and iterative relative fuzzy connectedness (IRFC). Both RFC and IRFC objects (of which IRFC contains RFC) can be found via linear time algorithms, linear with respect to the image size. The new algorithm, P-ORFC (for parallel optimal RFC), which is implemented by using NVIDIA’s Compute Unified Device Architecture (CUDA) platform, considerably improves the computational speed of the above mentioned CPU based IRFC algorithm. Results: Experiments based on four data sets of small, medium, large, and super data size, achieved speedup factors of 32.8×, 22.9×, 20.9×, and 17.5×, correspondingly, on the NVIDIA Tesla C1060 platform. Although the output of P-ORFC need not precisely match that of IRFC output, it is very close to it and, as the authors prove, always lies between the RFC and IRFC objects. Conclusions: A parallel version of a top-of-the-line algorithm in the family of FC has been developed on the NVIDIA GPUs. An interactive speed of segmentation has been achieved, even for the largest medical image data set. Such GPU implementations may play a crucial role in automatic anatomy recognition in clinical radiology. PMID:23298094

Characterization of Orthorhombic α-MoO3 Microplates Produced by a Microwave Plasma Process

International Nuclear Information System (INIS)

Klinbumrung, A.; Thongtem, S.; Thongtem, T.; Thongtem, S.; Thongtem, T.

2012-01-01

Orthorhombic α-MoO 3 microplates were produced from (NH 4 ) 6 Mo 7 O 24 H 2 O solid powder by a 900 W microwave plasma for 40, 50, and 60?min. Phase, morphologies, and vibration modes were characterized by X-ray diffraction (XRD), selected area electron diffraction (SAED), scanning electron microscopy (SEM), and Raman and Fourier transform infrared (FTIR) spectroscopy. Sixty min processing resulted in the best crystallization of the α-MoO 3 phase, with photoluminescence (PL) in a wavelength range of 430-440 nm.

The TMAO-Producing Enzyme Flavin-Containing Monooxygenase 3 Regulates Obesity and the Beiging of White Adipose Tissue

Directory of Open Access Journals (Sweden)

Rebecca C. Schugar

2017-06-01

Full Text Available Emerging evidence suggests that microbes resident in the human intestine represent a key environmental factor contributing to obesity-associated disorders. Here, we demonstrate that the gut microbiota-initiated trimethylamine N-oxide (TMAO-generating pathway is linked to obesity and energy metabolism. In multiple clinical cohorts, systemic levels of TMAO were observed to strongly associate with type 2 diabetes. In addition, circulating TMAO levels were associated with obesity traits in the different inbred strains represented in the Hybrid Mouse Diversity Panel. Further, antisense oligonucleotide-mediated knockdown or genetic deletion of the TMAO-producing enzyme flavin-containing monooxygenase 3 (FMO3 conferred protection against obesity in mice. Complimentary mouse and human studies indicate a negative regulatory role for FMO3 in the beiging of white adipose tissue. Collectively, our studies reveal a link between the TMAO-producing enzyme FMO3 and obesity and the beiging of white adipose tissue.

Electrical Resistance of Nb$_{3}$Sn/Cu Splices Produced by Electromagnetic Pulse Technology and Soft Soldering

CERN Document Server

Schoerling, D; Scheuerlein, C; Atieh, S; Schaefer, R

2011-01-01

The electrical interconnection of Nb$_{3}$Sn/Cu strands is a key issue for the construction of Nb$_{3}$Sn based damping ring wigglers and insertion devices for third generation light sources. We compare the electrical resistance of Nb$_{3}$Sn/Cu splices manufactured by solid state welding using Electromagnetic Pulse Technology (EMPT) with that of splices produced by soft soldering with two different solders. The resistance of splices produced by soft soldering depends strongly on the resistivity of the solder alloy at the operating temperature. By solid state welding splice resistances below 10 nOhm can be achieved with 1 cm strand overlap length only, which is about 4 times lower than the resistance of Sn96Ag4 soldered splices with the same overlap length. The comparison of experimental results with Finite Element simulations shows that the electrical resistance of EMPT welded splices is determined by the resistance of the stabilizing copper between the superconducting filaments and confirms that welding of ...

An Experimental Exploration of the Impact of Network-Level Packet Loss on Network Intrusion Detection

Science.gov (United States)

2015-08-01

fast recovery algorithms. Freemont (CA): Internet Engineering Task Force; 1997 Jan. RFC No.: 2001. 2. Smith SC, Hammell RJ, Parker TW, Marvel LM. A...2014. p. 1–6. 3. Sangster B, O’Connor T, Cook T, Fanelli R, Dean E , Adams WJ, Morrell C, Conti G. Toward instrumenting network warfare competitions

The study of 3s3p4 configuration in the P-Sequence, Co X III - Ni X IV, by laser-produced plasmas

International Nuclear Information System (INIS)

Borges, F.O.; Cavalcanti, G.H.; Farias, E.E.; Trigueiros, A.G.

2007-01-01

Wavelengths from radiation of plasmas produced by a Nd:YAG/glass laser focused on target of Co and Ni have been recorded photographically in the region 240-600 A with a 3m normal incidence spectrograph. For this sequence (Co X III and Ni X IV) we have identified 13 new lines belonging to the array 3s 2 3p 3 -3s3p 4 and derived 7 new levels for the 3s3p 4 configuration. The classification was established by comparison of the relative intensities for the lines along the isoelectronic sequence, extrapolation, and Hartree-Fock calculation. (author)

Guideline for Sampling and Analysis of Tar and Particles in Biomass Producer Gases. Version 3.3

Energy Technology Data Exchange (ETDEWEB)

Neeft, J.P.A.; Knoef, H.A.M.; Zielke, U.; Sjoestroem, K.; Hasler, P.; Simell, P.A.; Dorrington, M.A.; Thomas, L.; Abatzoglou, N.; Deutch, S.; Greil, C.; Buffinga, G.J.; Brage, C.; Suomalainen, M.

2002-07-01

This Guideline provides a set of procedures for the measurement of organic contaminants and particles in producer gases from biomass gasifiers. The procedures are designed to cover different gasifier types (updraft or downdraft fixed bed or fluidised bed gasifiers), operating conditions (0 - 900C and 0.6-60 bars) and concentration ranges (1 mg/m{sub n}{sup 3} to 300 g/m{sub n}{sup 3}). The Guideline describes a modular sampling train, and a set of procedures, which include: planning and preparation of the sampling, sampling and post-sampling, analysis, calculations, error analysis and reporting. The modular sampling train consists of 4 modules. Module 1 is a preconditioning module for isokinetic sampling and gas cooling. Module 2 is a particle collection module including a heated filter. Module 3 is a tar collection module with a gas quench (optionally by circulating a liquid), impinger bottles and a backup adsorber. Module 4 is a volume-sampling module consisting of a pump, a rotameter, a gas flow meter and pressure and temperature indicators. The equipment and materials that are required for procuring this modular sampling train are given in the Guideline. The sampling procedures consist of a description for isokinetic sampling, a leakage test prior to sampling, the actual sampling and its duration, how the equipment is cleaned after the sampling, and how the samples are prepared and stored. Analysis of the samples is performed via three procedures. Prior to these procedures, the sample is prepared by Soxhlet extraction of the tars on the particle filter and by collection of all tars in one bulk solution. The first procedure describes the weighing of the particle filter to obtain the concentration of particles in the biomass producer gas. The bulk tar solution is used for two purposes: for determination of gravimetric tar and for analysis of individual compounds. The second procedure describes how to determine the gravimetric tar mass from the bulk solution. The

Purification and characterization of multiple bacteriocins and an inducing peptide produced by Enterococcus faecium NKR-5-3 from Thai fermented fish.

Science.gov (United States)

Ishibashi, Naoki; Himeno, Kohei; Fujita, Koji; Masuda, Yoshimitsu; Perez, Rodney Honrada; Zendo, Takeshi; Wilaipun, Pongtep; Leelawatcharamas, Vichien; Nakayama, Jiro; Sonomoto, Kenji

2012-01-01

Enterocins NKR-5-3A, B, C, and D were purified from the culture supernatant of Enterococcus faecium NKR-5-3 and characterized. Among the four purified peptides, enterocin NKR-5-3A (5242.3 Da) was identical to brochocin A, produced by Brochothrix campestris ATCC 43754, in mature peptides, and its putative synergistic peptide, enterocin NKR-5-3Z, was found to be encoded in ent53Z downstream of ent53A, encoding enterocin NKR-5-3A. Enterocin NKR-5-3B (6316.4 Da) showed a broad antimicrobial spectrum, and enterocin NKR-5-3C (4512.8 Da) showed high activity against Listeria. Enterocin NKR-5-3D (2843.5 Da), showing high homology to an inducing peptide produced by Lactobacillus sakei 5, induced the production of the enterocins. The enterocins showed different antimicrobial spectra and intensities. E. faecium NKR-5-3 concomitantly produced enterocins NKR-5-3A, B, C, and D which probably belong to different classes of bacteriocins. Furthermore, NKR-5-3 production was induced by enterocin NKR-5-3D.

Hydroxide precursors to produce nanometric YCrO3: Characterization and conductivity analysis

International Nuclear Information System (INIS)

Durán, A.; Meza F, C.; Arizaga, Gregorio Guadalupe Carbajal

2012-01-01

Highlights: ► Y/Cr mixed hydroxide was precipitated with gaseous ammonia. ► The hydroxide treated at 1373 K formed YCrO 3 crystals with 20 nm diameter. ► Electrical properties were different than those found in other methods of synthesis. ► E act suggests small-polarons as conduction mechanisms. -- Abstract: A precursor to produce perovskite-type YCrO 3 was precipitated by bubbling gaseous ammonia into an yttrium/chromium salts solution. X-ray diffraction showed that the as-prepared powders were amorphous. Thermal treatment between 1273 and 1373 K, leads to formation of polycrystalline YCrO 3 with crystal sizes around 20 nm. High resolution X-ray photoelectron spectra showed uniform chemical environment for yttrium and chromium in the amorphous hydroxide and crystalline YCrO 3 . Shifts between Y 3d 5/2 and Cr 2p 3/2 binding energy suggest redistribution or charge transfer between yttrium and chromium ions in the YCrO 3 structure. The electrical properties of YCrO 3 , whose precursors were precipitated with gaseous ammonia are different than those prepared by combustion synthesis. Electrical conductivity presents a sudden increase at ∼473 K, which is associated to the grain size and morphology of the crystallites. The redistribution of charge between Y(III) and Cr(III) is thermally activated by the hopping of small-polarons, which are characterized by the Arrhenius law as the conductive mechanism.

Physicochemical properties of exopolysaccharide produced by Lactobacillus kefiranofaciens ZW3 isolated from Tibet kefir.

Science.gov (United States)

Wang, Yanping; Ahmed, Zaheer; Feng, Wu; Li, Chao; Song, Shiying

2008-10-01

An exopolysaccharide (EPS) producing strain, ZW3, was isolated from Tibet kefir grain and was identified as Lactobacillus kefiranofaciens. FT-IR spectroscopy revealed the presence of carboxyl, hydroxyl, and amide groups, which correspond to a typical heteropolymeric polysaccharide. The GC analysis of ZW3 EPS revealed that it was glucogalactan in nature. Exopolymer showed similar flocculation stability like xanthan gum but better than guar gum with a melting point of 93.38 degrees C which is lower than xanthan gum (153.4 degrees C) and guar gum (490.11 degrees C). Compared with other commercially available hydrocolloids like xanthan gum, guar gum and locust gum ZW3 EPS showed much better emulsifying capability.

Rotating flux compressor for energy conversion

International Nuclear Information System (INIS)

Chowdhuri, P.; Linton, T.W.; Phillips, J.A.

1983-01-01

The rotating flux compressor (RFC) converts rotational kinetic energy into an electrical output pulse which would have higher energy than the electrical energy initially stored in the compressor. An RFC has been designed in which wedge-shaped rotor blades pass through the air gaps between successive turns of a solenoid, the stator. Magnetic flux is generated by pulsing the stator solenoids when the inductance is a maximum, i.e., when the flux fills the stator-solenoid volume. Connecting the solenoid across a load conserves the flux which is compressed within the small volume surrounding the stator periphery when the rotor blades cut into the free space between the stator plates, creating a minimum-inductance condition. The unique features of this design are: (1) no electrical connections (brushes) to the rotor; (2) no conventional windings; and (3) no maintenance. The device has been tested up to 5000 rpm of rotor speed

Isolation and purification of two bacteriocins 3D produced by Enterococcus faecium with inhibitory activity against Listeria monocytogenes.

Science.gov (United States)

Bayoub, Kaoutar; Mardad, Ilham; Ammar, Emna; Serrano, Aurelio; Soukri, Abdelaziz

2011-02-01

Strain 3D, isolated from fermented traditional Moroccan dairy product, and identified as Enterococcus faecium, was studied for its capability to produce two bacteriocins acting against Listeria monocytogenes. Bacteriocins 3 Da and 3Db were heat stable inactivated by proteinase K, pepsin, and trypsin but not when treated with catalase. The evidenced bacteriocins were stable in a wide pH range from 2 to 11 and bactericidal activity was kept during storage at 4°C. However, the combination of temperature and pH exhibited a stability of the bacteriocins. RP-HPLC purification of the anti-microbial compounds shows two active fractions eluted at 16 and 30.5 min, respectively. Mass spectrometry analysis showed that E. faecium 3D produce two bacteriocins Enterocin 3 Da (3893.080 Da) and Enterocin 3Db (4203.350 Da). This strain is food-grade organism and its bacteriocins were heat-stable peptides at basic, neutral, and acid pH: such bacteriocins may be of interest as food preservatives.

HNRNPLL stabilizes mRNAs for DNA replication proteins and promotes cell cycle progression in colorectal cancer cells.

Science.gov (United States)

Sakuma, Keiichiro; Sasaki, Eiichi; Kimura, Kenya; Komori, Koji; Shimizu, Yasuhiro; Yatabe, Yasushi; Aoki, Masahiro

2018-06-05

HNRNPLL (heterogeneous nuclear ribonucleoprotein L-like), an RNA-binding protein that regulates alternative splicing of pre-mRNAs, has been shown to regulate differentiation of lymphocytes, as well as metastasis of colorectal cancer cells. Here we show that HNRNPLL promotes cell cycle progression and hence proliferation of colorectal cancer cells. Functional annotation analysis of those genes whose expression levels were changed by three-fold or more in RNA sequencing analysis between SW480 cells overexpressing HNRNPLL and those knocked down for HNRNPLL revealed enrichment of DNA replication-related genes by HNRNPLL overexpression. Among 13 genes detected in the DNA replication pathway, PCNA, RFC3, and FEN1 showed reproducible upregulation by HNRNPLL overexpression both at mRNA and protein levels in SW480 and HT29 cells. Importantly, knockdown of any of these genes alone suppressed the proliferation promoting effect induced by HNRNPLL overexpression. RNA-immunoprecipitation assay presented a binding of FLAG-tagged HNRNPLL to mRNA of these genes, and HNRNPLL overexpression significantly suppressed the downregulation of these genes during 12 hours of actinomycin D treatment, suggesting a role of HNRNPLL in mRNA stability. Finally, analysis of a public RNA sequencing dataset of clinical samples suggested a link between overexpression of HNRNPLL and that of PCNA, RFC3, and FEN1. This link was further supported by immunohistochemistry of colorectal cancer clinical samples, whereas expression of CDKN1A, which is known to inhibit the cooperative function of PCNA, RFC3, and FEN1, was negatively associated with HNRNPLL expression. These results indicate that HNRNPLL stabilizes mRNAs encoding regulators of DNA replication and promotes colorectal cancer cell proliferation. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Multifocal diffusion of KPC-3-producing ST512 Klebsiella pneumoniae in Italy

Directory of Open Access Journals (Sweden)

Aurora Piazza

2012-03-01

Full Text Available Introduction. The dissemination of carbapenemase-producing Klebsiella pneumoniae strains is an increasing problem worldwide. KPC ß-lactamases are Ambler class A enzymes mostly plasmid-encoded; their global spread represents a threat to clinical patients care and public health. Multi locus sequence type (ST258 is currently the most spread K. pneumoniae clone associated with KPC enzymes. Here we report the first identification and multifocal spread of KPC-3 producing K. pneumoniae clinical strains belonging to ST512 in Italy. Materials and Methods. Fifty six carbapenem-resistant K. pneumoniae isolates were collected from 7 Italian hospitals during the period June 2009-May 2011. Isolates were obtained from different wards (spinal unit, medicine, hematology, etc. and biological samples (mostly rectal swabs, urine and blood. Species identification and antimicrobial susceptibilities were obtained by NBC46/NM40 Microscan panels (Siemens. MICs values were interpreted according to EUCAST 2011 breakpoints. Modified Hodge test and combined disk test with phenyl-boronic acid (BOR and EDTA were performed.The presence of blaKPC genes were confirmed by PCR and sequencing. A complete characterization of the produced ß-lactamases (BLs was obtained by IEF followed by PCR experiments using primers specific for the detection of blaCTX-M-, blaTEM- and blaSHV type genes. PFGE and multilocus sequence typing (MLST were both used to investigate clonal isolates relatedness. Results. All 56 isolates resulted positive for the presence of KPC-type carbapenemases by both phenotypical and molecular analysis. Fifteen isolates, chosen as representative, were further investigated. Ten out of 15 isolates harboring the blaKPC-2 gene clustered with the known ST258, while the remaining 5/10 belonged to the newly described ST512 and harbored the blaKPC-3 gene. ST512 isolates, from 3/7 hospitals, were collected from rectal swabs (40%, blood (20%, endotracheal aspirate (20% and

Pulmonary Vein Isolation by High Intensity Focused Ultrasound

Directory of Open Access Journals (Sweden)

Matthias Antz

2007-04-01

Full Text Available Pulmonary vein isolation (PVI using radiofrequency current (RFC ablation is a potentially curative treatment option for patients with atrial fibrillation (AF. The shortcomings of the RFC technology (technically challenging, long procedure times, complications steadily kindle the interest in new energy sources and catheter designs. High intensity focused ultrasound (HIFU has the ability to precisely focus ultrasound waves in a defined area with a high energy density. HIFU balloon catheters (BC positioned at the PV ostia appear to be an ideal tool to transmit the ablation energy in a circumferential manner to the PV ostia and may therefore bear substantial advantage over conventional ablation catheters in PVI procedures. In clinical trials the HIFU BC has shown promising success rates similar to RFC catheter ablation for PVI in patients with AF. However, procedure times are still long and serious complications have been observed. Therefore, it may be a valuable alternative to the conventional techniques in selected patients but further clinical trials have to be initiated.

Micromechanical characteristics of an Al/sub 2/O/sub 3/-TiNi ceramic produced in a high-pressure chamber

Energy Technology Data Exchange (ETDEWEB)

Barashkov, G.A.; Neshpor, V.S.; Berdikov, V.F.; Pushkarev, O.I.; Lavrenova, E. A.

1987-03-01

The micromechanical characteristics of an Al/sub 2/O/sub 3/-TiNi ceramic produced in high-pressure chambers under conditions of forced mass transfer are investigated experimentally using the microindentation method. The objective of the study is to use micromechanical characteristics to determine the time required for producing an Al/sub 2/O/sub 3/-TiNi ceramic with a fully formed structure. It is found that the process of forced mass transfer and crystallization is completed within 60-120 s.

Producing a Linear Laser System for 3d Modelimg of Small Objects

Science.gov (United States)

Amini, A. Sh.; Mozaffar, M. H.

2012-07-01

Today, three dimensional modeling of objects is considered in many applications such as documentation of ancient heritage, quality control, reverse engineering and animation In this regard, there are a variety of methods for producing three-dimensional models. In this paper, a 3D modeling system is developed based on photogrammetry method using image processing and laser line extraction from images. In this method the laser beam profile is radiated on the body of the object and with video image acquisition, and extraction of laser line from the frames, three-dimensional coordinates of the objects can be achieved. In this regard, first the design and implementation of hardware, including cameras and laser systems was conducted. Afterwards, the system was calibrated. Finally, the software of the system was implemented for three dimensional data extraction. The system was investigated for modeling a number of objects. The results showed that the system can provide benefits such as low cost, appropriate speed and acceptable accuracy in 3D modeling of objects.

Design and producing of fine-group cross section library HENDL3.0/FG for subcritical system

International Nuclear Information System (INIS)

Zou, J.; Zeng, Q.; Xu, D.; Hu, L.; Long, P.

2012-01-01

To improve the accuracy of the neutron analyses for subcritical system with thermal fission blanket, a coupled neutron and photon (315 n + 42γ) fine-group cross section library HENDL3.0/FG based on ENDF/B-VII, JEFF3.1 and JENDL3.3 was produced by FDS team. In order to test the availability and reliability of the HENDL3.0/FG data library, shielding and critical safety benchmarks were performed with VisualBUS code. The testing results indicated that the discrepancy between calculation and experimental values of nuclear parameters fell in a reasonable range. It showed that the nuclear data library had accuracy and availability. (authors)

Critical wall shear stress for the EHEDG test method

DEFF Research Database (Denmark)

Jensen, Bo Boye Busk; Friis, Alan

2004-01-01

In order to simulate the results of practical cleaning tests on closed processing equipment, based on wall shear stress predicted by computational fluid dynamics, a critical wall shear stress is required for that particular cleaning method. This work presents investigations that provide a critical...... wall shear stress of 3 Pa for the standardised EHEDG cleaning test method. The cleaning tests were performed on a test disc placed in a radial flowcell assay. Turbulent flow conditions were generated and the corresponding wall shear stresses were predicted from CFD simulations. Combining wall shear...... stress predictions from a simulation using the low Re k-epsilon and one using the two-layer model of Norris and Reynolds were found to produce reliable predictions compared to empirical solutions for the ideal flow case. The comparison of wall shear stress curves predicted for the real RFC...

Infrared absorption of CH3OSO and CD3OSO radicals produced upon photolysis of CH3OS(O)Cl and CD3OS(O)Cl in p-H2 matrices

International Nuclear Information System (INIS)

Lee, Yu-Fang; Kong, Lin-Jun; Lee, Yuan-Pern

2012-01-01

Irradiation at 239 ± 20 nm of a p-H 2 matrix containing methoxysulfinyl chloride, CH 3 OS(O)Cl, at 3.2 K with filtered light from a medium-pressure mercury lamp produced infrared (IR) absorption lines at 3028.4 (attributable to ν 1 , CH 2 antisymmetric stretching), 2999.5 (ν 2 , CH 3 antisymmetric stretching), 2950.4 (ν 3 , CH 3 symmetric stretching), 1465.2 (ν 4 , CH 2 scissoring), 1452.0 (ν 5 , CH 3 deformation), 1417.8 (ν 6 , CH 3 umbrella), 1165.2 (ν 7 , CH 3 wagging), 1152.1 (ν 8 , S=O stretching mixed with CH 3 rocking), 1147.8 (ν 9 , S=O stretching mixed with CH 3 wagging), 989.7 (ν 10 , C-O stretching), and 714.5 cm -1 (ν 11 , S-O stretching) modes of syn-CH 3 OSO. When CD 3 OS(O)Cl in a p-H 2 matrix was used, lines at 2275.9 (ν 1 ), 2251.9 (ν 2 ), 2083.3 (ν 3 ), 1070.3 (ν 4 ), 1056.0 (ν 5 ), 1085.5 (ν 6 ), 1159.7 (ν 7 ), 920.1 (ν 8 ), 889.0 (ν 9 ), 976.9 (ν 10 ), and 688.9 (ν 11 ) cm -1 appeared and are assigned to syn-CD 3 OSO; the mode numbers correspond to those used for syn-CH 3 OSO. The assignments are based on the photolytic behavior and a comparison of observed vibrational wavenumbers, infrared intensities, and deuterium isotopic shifts with those predicted with the B3P86/aug-cc-pVTZ method. Our results extend the previously reported four transient IR absorption bands of gaseous syn-CH 3 OSO near 2991, 2956, 1152, and 994 cm -1 to 11 lines, including those associated with C-O, O-S, and S=O stretching modes. Vibrational wavenumbers of syn-CD 3 OSO are new. These results demonstrate the advantage of a diminished cage effect of solid p-H 2 such that the Cl atom, produced via UV photodissociation of CH 3 OS(O)Cl in situ, might escape from the original cage to yield isolated CH 3 OSO radicals.

Infrared absorption of CH3OSO and CD3OSO radicals produced upon photolysis of CH3OS(O)Cl and CD3OS(O)Cl in p-H2 matrices.

Science.gov (United States)

Lee, Yu-Fang; Kong, Lin-Jun; Lee, Yuan-Pern

2012-03-28

Irradiation at 239 ± 20 nm of a p-H(2) matrix containing methoxysulfinyl chloride, CH(3)OS(O)Cl, at 3.2 K with filtered light from a medium-pressure mercury lamp produced infrared (IR) absorption lines at 3028.4 (attributable to ν(1), CH(2) antisymmetric stretching), 2999.5 (ν(2), CH(3) antisymmetric stretching), 2950.4 (ν(3), CH(3) symmetric stretching), 1465.2 (ν(4), CH(2) scissoring), 1452.0 (ν(5), CH(3) deformation), 1417.8 (ν(6), CH(3) umbrella), 1165.2 (ν(7), CH(3) wagging), 1152.1 (ν(8), S=O stretching mixed with CH(3) rocking), 1147.8 (ν(9), S=O stretching mixed with CH(3) wagging), 989.7 (ν(10), C-O stretching), and 714.5 cm(-1) (ν(11), S-O stretching) modes of syn-CH(3)OSO. When CD(3)OS(O)Cl in a p-H(2) matrix was used, lines at 2275.9 (ν(1)), 2251.9 (ν(2)), 2083.3 (ν(3)), 1070.3 (ν(4)), 1056.0 (ν(5)), 1085.5 (ν(6)), 1159.7 (ν(7)), 920.1 (ν(8)), 889.0 (ν(9)), 976.9 (ν(10)), and 688.9 (ν(11)) cm(-1) appeared and are assigned to syn-CD(3)OSO; the mode numbers correspond to those used for syn-CH(3)OSO. The assignments are based on the photolytic behavior and a comparison of observed vibrational wavenumbers, infrared intensities, and deuterium isotopic shifts with those predicted with the B3P86∕aug-cc-pVTZ method. Our results extend the previously reported four transient IR absorption bands of gaseous syn-CH(3)OSO near 2991, 2956, 1152, and 994 cm(-1) to 11 lines, including those associated with C-O, O-S, and S=O stretching modes. Vibrational wavenumbers of syn-CD(3)OSO are new. These results demonstrate the advantage of a diminished cage effect of solid p-H(2) such that the Cl atom, produced via UV photodissociation of CH(3)OS(O)Cl in situ, might escape from the original cage to yield isolated CH(3)OSO radicals.

Runx1 and Runx3 are involved in the generation and function of highly suppressive IL-17-producing T regulatory cells.

Directory of Open Access Journals (Sweden)

Lequn Li

Full Text Available CD4(+Foxp3(+ T regulatory cells (Tregs display phenotypic and functional plasticity that is regulated by cytokines and other immune cells. Previously, we determined that during co-culture with CD4(+CD25(- T cells and antigen presenting cells, Tregs produced IL-17. Here, we investigated the mechanisms underlying the differentiation of IL-17-producing Treg (Tr17 cells and their molecular and functional properties. We determined that during stimulation via TCR/CD3 and CD28, the combination of IL-1β and IL-2 was necessary and sufficient for the generation of Tr17 cells. Tr17 cells expressed Runx1 transcription factor, which was required for sustained expression of Foxp3 and RORγt and for production of IL-17. Surprisingly, Tr17 cells also expressed Runx3, which regulated transcription of perforin and granzyme B thereby mediating cytotoxic activity. Our studies indicate that Tr17 cells concomitantly express Foxp3, RORγt, Runx1 and Runx3 and are capable of producing IL-17 while mediating potent suppressive and cytotoxic function.

Hydroxide precursors to produce nanometric YCrO{sub 3}: Characterization and conductivity analysis

Energy Technology Data Exchange (ETDEWEB)

Durán, A., E-mail: dural@cnyn.unam.mx [Universidad Nacional Autónoma de México, Centro de Nanociencias y Nanotecnología, Km. 107 Carretera Tijuana-Ensenada, Apartado Postal 14, C.P. 22800, Ensenada, B.C. (Mexico); Meza F, C. [Universidad Nacional Autónoma de México, Centro de Nanociencias y Nanotecnología, Km. 107 Carretera Tijuana-Ensenada, Apartado Postal 14, C.P. 22800, Ensenada, B.C. (Mexico); Arizaga, Gregorio Guadalupe Carbajal, E-mail: gregoriocarbajal@yahoo.com.mx [Departamento de Química, Universidad de Guadalajara, Marcelino García Barragán 1421, C.P. 44430, Guadalajara, Jalisco (Mexico)

2012-06-15

Highlights: ► Y/Cr mixed hydroxide was precipitated with gaseous ammonia. ► The hydroxide treated at 1373 K formed YCrO{sub 3} crystals with 20 nm diameter. ► Electrical properties were different than those found in other methods of synthesis. ► E{sub act} suggests small-polarons as conduction mechanisms. -- Abstract: A precursor to produce perovskite-type YCrO{sub 3} was precipitated by bubbling gaseous ammonia into an yttrium/chromium salts solution. X-ray diffraction showed that the as-prepared powders were amorphous. Thermal treatment between 1273 and 1373 K, leads to formation of polycrystalline YCrO{sub 3} with crystal sizes around 20 nm. High resolution X-ray photoelectron spectra showed uniform chemical environment for yttrium and chromium in the amorphous hydroxide and crystalline YCrO{sub 3}. Shifts between Y 3d{sub 5/2} and Cr 2p{sub 3/2} binding energy suggest redistribution or charge transfer between yttrium and chromium ions in the YCrO{sub 3} structure. The electrical properties of YCrO{sub 3}, whose precursors were precipitated with gaseous ammonia are different than those prepared by combustion synthesis. Electrical conductivity presents a sudden increase at ∼473 K, which is associated to the grain size and morphology of the crystallites. The redistribution of charge between Y(III) and Cr(III) is thermally activated by the hopping of small-polarons, which are characterized by the Arrhenius law as the conductive mechanism.

Sintering of Cu–Al2O3 nano-composite powders produced by a thermochemical route

Directory of Open Access Journals (Sweden)

MARIJA KORAC

2007-11-01

Full Text Available This paper presents the synthesis of nano-composite Cu–Al2O3 powder by a thermochemical method and sintering, with a comparative analysis of the mechanical and electrical properties of the obtained solid samples. Nano-crystalline Cu–Al2O3 powders were produced by a thermochemical method through the following stages: spray-drying, oxidation of the precursor powder, reduction by hydrogen and homogenization. Characterization of powders included analytical electron microscopy (AEM coupled with energy dispersive spectroscopy (EDS, differenttial thermal and thermogravimetric (DTA–TGA analysis and X-ray diffraction (XRD analysis. The size of the produced powders was 20–50 nm, with a noticeable presence of agglomerates. The composite powders were characterized by a homogenous distribution of Al2O3 in a copper matrix. The powders were cold pressed at a pressure of 500 MPa and sintered in a hydrogen atmosphere under isothermal conditions in the temperature range from 800 to 900 °C for up to 120 min. Characterization of the Cu–Al2O3 sintered system included determination of the density, relative volume change, electrical and mechanical properties, examination of the microstructure by SEM and focused ion beam (FIB analysis, as well as by EDS. The obtained nano-composite, the structure of which was, with certain changes, presserved in the final structure, provided a sintered material with a homogenеous distribution of dispersoid in a copper matrix, with exceptional effects of reinforcement and an excellent combination of mechanical and electrical properties.

Bacillus amyloliquefaciens TSBSO 3.8, a biosurfactant-producing strain with biotechnological potential for microbial enhanced oil recovery.

Science.gov (United States)

Alvarez, Vanessa Marques; Jurelevicius, Diogo; Marques, Joana Montezano; de Souza, Pamella Macedo; de Araújo, Livia Vieira; Barros, Thalita Gonçalves; de Souza, Rodrigo Octavio Mendonça Alves; Freire, Denise Maria Guimarães; Seldin, Lucy

2015-12-01

A screening for biosurfactant-producing bacteria was conducted with 217 strains that were isolated from environmental samples contaminated with crude oil and/or petroleum derivatives. Although 19 promising biosurfactant producers were detected, strain TSBSO 3.8, which was identified by molecular methods as Bacillus amyloliquefaciens, drew attention for its production of a high-activity compound that presented an emulsification activity of 63% and considerably decreased surface (28.5 mN/m) and interfacial (11.4 mN/m) tensions in Trypticase Soy Broth culture medium. TSBSO 3.8 growth and biosurfactant production were tested under different physical and chemical conditions to evaluate its biotechnological potential. Biosurfactant production occurred between 0.5% and 7% NaCl, at pH values varying from 6 to 9 and temperatures ranging from 28 to 50 °C. Moreover, biosurfactant properties remained the same after autoclaving at 121 °C for 15 min. The biosurfactant was also successful in a test to simulate microbial enhanced oil recovery (MEOR). Mass spectrometry analysis showed that the surface active compound was a surfactin, known as a powerful biosurfactant that is commonly produced by Bacillus species. The production of a high-efficiency biosurfactant, under some physical and chemical conditions that resemble those experienced in an oil production reservoir, such as high salinities and temperatures, makes TSBSO 3.8 an excellent candidate and creates good expectations for its application in MEOR. Copyright © 2015 Elsevier B.V. All rights reserved.

Biochar produced from oak sawdust by Lanthanum (La)-involved pyrolysis for adsorption of ammonium (NH4(+)), nitrate (NO3(-)), and phosphate (PO4(3-)).

Science.gov (United States)

Wang, Zhanghong; Guo, Haiyan; Shen, Fei; Yang, Gang; Zhang, Yanzong; Zeng, Yongmei; Wang, Lilin; Xiao, Hong; Deng, Shihuai

2015-01-01

A series of biochars were prepared by pyrolyzing oak sawdust with/without LaCl3 involvement at temperature of 300-600 °C, and approximate and ultimate analyses were carried out to check their basic characteristics. Meanwhile, the releases of readily soluble NH4(+), NO3(-) and PO4(3-) from biochars and the adsorption of NH4(+), NO3(-) and PO4(3-) by biochars were investigated. Results indicated that the involvement of LaCl3 in pyrolysis could advance the temperature of maximum mass loss by 10 °C compared with oak sawdust (CK), and potentially promoted biochar yield. Overall, the releases of readily soluble NH4(+), NO3(-) and PO4(3-) from biochars were negatively related to pyrolysis temperature, and the releases were greatly weakened by La-biochars. Additionally, the adsorption to NH4(+) can be promoted by the biochars produced at low temperature. On the contrary, the NO3(-) adsorption can be improved by increasing pyrolysis temperature. The highest PO4(3-) adsorption was achieved by the biochars produced at 500 °C. According to the results of adsorption isotherms, the maximum adsorption capacity of NH4(+), NO3(-) and PO4(3-) can be significantly promoted by 1.9, 11.2, and 4.5 folds using La-biochars. Based on the observations of FT-IR, SEM-EDS, and surface functional groups, the improvement of NH4(+) adsorption was potentially associated with the existing acidic function groups (phenolic-OH and carboxyl C=O). The increased basic functional groups on La-biochars were beneficial to improve NO3(-) and PO4(3-) adsorption. Besides, PO4(3-) adsorption was also potentially related to the formed La2O3. Copyright © 2014 Elsevier Ltd. All rights reserved.

PRODUCING A LINEAR LASER SYSTEM FOR 3D MODELIMG OF SMALL OBJECTS

Directory of Open Access Journals (Sweden)

A. Sh. Amini

2012-07-01

Full Text Available Today, three dimensional modeling of objects is considered in many applications such as documentation of ancient heritage, quality control, reverse engineering and animation In this regard, there are a variety of methods for producing three-dimensional models. In this paper, a 3D modeling system is developed based on photogrammetry method using image processing and laser line extraction from images. In this method the laser beam profile is radiated on the body of the object and with video image acquisition, and extraction of laser line from the frames, three-dimensional coordinates of the objects can be achieved. In this regard, first the design and implementation of hardware, including cameras and laser systems was conducted. Afterwards, the system was calibrated. Finally, the software of the system was implemented for three dimensional data extraction. The system was investigated for modeling a number of objects. The results showed that the system can provide benefits such as low cost, appropriate speed and acceptable accuracy in 3D modeling of objects.

Effect of Indole-3-Acetic Acid-Producing Bacteria on Phytoremediation of Soil Contaminated with Phenanthrene and Anthracene by Mungbean

Directory of Open Access Journals (Sweden)

Waraporn Chouychai

2016-07-01

Full Text Available The use of indole-3-acetic acid (IAA-producing bacteria isolated from non-contaminated weed rhizosphere to enhance plant growth and PAH phytoremediation capacity was investigated. IAA-producing bacterial isolates, designated NSRU1, NSRU2, and NSRU3, were isolated from the rhizosphere of Eleusine indica (Poaceae and Chromolaena odorata (Asteraceae. The isolates were able to produce IAA in nutrient broth. However, when grown in the presence of 100 mg/l of either phenanthrene or anthracene, the amount of IAA produced by each isolate was reduced significantly. Mungbean seedlings were planted in 100 mg/kg phenanthrene- or anthracene-contaminated soil without or with inoculation of ≈106 CFU/g dry soil with one of the bacterial isolates. Inoculation with either NSRU1 or NSRU2 was effective at enhancing shoot length of mungbean in phenanthrene-contaminated soil on day 16. Also, inoculation with isolate NSRU1 led to increased root dry weight of mungbean in phenanthrene-contaminated soil on day 30. Phenanthrene and anthracene degradation on day 16 and 30 in planted and inoculated soil ranged between 92 - 93.8% and 92.2 - 94.1%, respectively, which were not significantly different from planted and uninoculated soil (93.9 and 94.9%. These data showed that IAA-producing bacteria could enhance plant growth, but was unable to increase PAH biodegradation under the conditions tested.

Superconducting properties of powder-metallurgically produced Cu-Nb3Sn composite wires

International Nuclear Information System (INIS)

Schaper, W.; Wecker, J.; Heine, K.; Bormann, R.; Freyhardt, H.C.

1988-01-01

The critical current density of composite superconducting wires can be improved by ternary or quaternary additions. If these additions are incorporated into the A15 phase the upper critical field can be increased. An increase in this field, however, can only be realized if the additions do not strongly deteriorate the critical temperature. An enhanced upper critical field in connection with a favorable grain size of the A15 phase finally leads to improved critical current densities in the entire field range. With these parameters as guidelines, the effects of Ti, In, Ga, and Ge additions to the bronze and of Ta additions to the niobium on the superconducting properties of PM produced Cu-Nb 3 Sn wires were investigated

Assessing Intraseasonal Variability Produced by Several Deep Convection Schemes in the NCAR CCM3.6

Science.gov (United States)

Maloney, E. D.

2001-05-01

The Hack, Zhang/McFarlane, and McRAS convection schemes produce very different simulations of intraseasonal variability in the NCAR CCM3.6. A robust analysis of simulation performance requires an expanded set of diagnostics. The use of only one criterion to analyze model Madden-Julian oscillation (MJO) variability, such as equatorial zonal wind variability, may give a misleading impression of model performance. Schemes that produce strong variability in zonal winds may sometimes lack a corresponding coherent signal in precipitation, suggesting that model convection and the large-scale circulation are not as strongly coupled as observed. The McRAS scheme, which includes a parametrization of unsaturated convective downdrafts, produces the best simulation of intraseasonal variability of the three schemes used. Downdrafts in McRAS create a moister equatorial troposphere, which increases equatorial convection. Composite analysis indicates a strong dependence of model intraseasonal variability on the frictional convergence mechanism, which may also be important in nature. The McRAS simulation has limitations, however. Indian Ocean variability is weak, and anomalous convection extends too far east across the Pacific. The dependence of convection on surface friction is too strong, and causes enhanced MJO convection to be associated with low-level easterly wind perturbations, unlike observed MJO convection. Anomalous vertical advection associated with surface convergence influences model convection by moistening the lower troposphere. Based on the work of Hendon (2000), coupling to an interactive ocean is unlikely to change the performance of the CCM3 with McRAS, due to the phase relationship between anomalous convection and zonal winds. Use of the analysis tools presented here indicates areas for improvement in the parametrization of deep convection by atmospheric GCMs.

Defect cascades produced by neutron irradiation in YBa2Cu3O7-δ

International Nuclear Information System (INIS)

Frischherz, M.C.; Kirk, M.A.; Farmer, J.; Greenwood, L.R.; Weber, H.W.

1992-12-01

The defect cascades produced by fast neutron irradiation of YBa 2 Cu 3 O 7-δ single crystals were studied by transmission electron microscopy. The visible defects were found to have sizes between 1 and 5 nm. Defect densities were obtained as a function of neutron fluence between 2 and 8 x 10 21 m -2 (E>0.1 MeV) and compared to damage calculations. The measured defect density was found to scale linearly with fluence and to be 1 x 10 22 m -3 at 2 x 10 21 m -2 . The defect stability was studied at room temperature and through annealing to 400 degrees C. The high fluence regime (∼10 22 m -2 ) was investigated as well

Characterization of Al–Al4C3 nanocomposites produced by mechanical milling

International Nuclear Information System (INIS)

Santos-Beltrán, A.; Goytia-Reyes, R.; Morales-Rodriguez, H.; Gallegos-Orozco, V.; Santos-Beltrán, M.; Baldenebro-Lopez, F.; Martínez-Sánchez, R.

2015-01-01

In this work, a mixture of Al–C–Al 4 C 3 nanopowder previously synthesized by mechanical milling and subsequent thermal treatment was used to reinforce the Al matrix. The nanocomposites were fabricated via high-energy ball milling and subsequent sintering process for different periods of time at 550 °C. Hardness and compression tests were performed to evaluate the mechanical properties of the nanocomposites in the as-milled and sintered conditions. According to the results the reinforcement located in the grain boundaries is responsible for the brittle behavior observed in the nanocomposites during the compression test. The combined effect of sintering and precipitation mechanisms produced an evident increase of the strength of the Al matrix at a relatively short sintering time. By using the Rietveld method the crystallite size and microstrain measurements were determined and correlated with the microhardness values. For the proper characterization of the nanoparticles present in the Al matrix, atomic force microscopy and high resolution electron microscopy were used. - Highlights: • Nanostructured Al 4 C 3 reinforcement was fabricated via mechanical milling and heat treatment. • We found a significant increase of the mechanical properties at short sintering times. • The formation of Al 4 C 3 with during sintering time restricted the excessive growth of the crystallite. • Al 4 C 3 located in the grain boundaries causes brittle fracture observed in compression tests. • There is a correlation between, crystallite size and microstrain values with microhardness

A Panel of Cytochrome P450 BM3 Variants To Produce Drug Metabolites and Diversify Lead Compounds

Science.gov (United States)

Sawayama, Andrew M.; Chen, Michael M. Y.; Kulanthaivel, Palaniappan; Kuo, Ming-Shang; Hemmerle, Horst; Arnold, Frances H.

2011-01-01

Here we demonstrate that a small panel of variants of cytochrome P450 BM3 from Bacillus megaterium covers the breadth of reactivity of human P450s by producing 12 of 13 mammalian metabolites for two marketed drugs, verapamil and astemizole, and one research compound. The most active enzymes support preparation of individual metabolites for preclinical bioactivity and toxicology evaluations. Underscoring their potential utility in drug lead diversification, engineered P450 BM3 variants also produce novel metabolites by catalyzing reactions at carbon centers beyond those targeted by animal and human P450s. Production of a specific metabolite can be improved by directed evolution of the enzyme catalyst. Some variants are more active on the more hydrophobic parent drug than on its metabolites, which limits production of multiply-hydroxylated species, a preference that appears to depend on the evolutionary history of the P450 variant. PMID:19774562

Variability of Streptomyces narbonesis producing ν-1,3/1,4 glucanglucan hydrolasi induced by UV and mitomycin C

International Nuclear Information System (INIS)

Elinov, N.P.; Pronina, M.I.; Zaikina, N.A.; Azizov, P.I.

1982-01-01

Effect of mitomycin c and ultraviolet rays on spores and spore sprouts of 2 hour old of Streptomyces narbonensis of 2a producer of ν-1.3/1.4 glucanglucanhydrolase (ν-gluconase) has been studied. It is shown that the lethal effect of mitomycin c on spore sprouts is considerably higher than on producer spores. Mutageneous activity of mitomycin C is closely related to the process of spore germination. Under the effect of mitomycin C on spore sprouts noted is higher mutability as compared with the effect on spores. Frequency of morphological mutations is lower under the effect of ultraviolet rays as compared with the effect of mitomycin C. Under ultraviolet rays produced were mutants synthesizing during fermentation on medium without inductor of exotype ν-gluconase

Defect cascades produced by neutron irradiation in YBa2Cu3O7-δ superconductors

International Nuclear Information System (INIS)

Frischherz, M.C.; Kirk, M.A.; Farmer, J.

1994-02-01

The defect cascades produced by fast neutron irradiation of YBa 2 Cu 3 O 7-δ single crystals were studied by transmission electron microscopy. The visible defects were found to have sizes between 1 and 5 rim. Defect densities were obtained as a function of neutron fluence between 2 and 8x 10 21 m -2 (E>0.1 MeV). The measured defect density scales linearly with fluence and amounts to 1x10 22 m -3 at a neutron fluence of 2x10 2l m -2 . The defect stability was studied at room temperature and through annealing to 400 degrees C

Readiness for Residency: A Survey to Evaluate Undergraduate Medical Education Programs.

Science.gov (United States)

Peterson, Linda N; Rusticus, Shayna A; Wilson, Derek A; Eva, Kevin W; Lovato, Chris Y

2015-11-01

Health professions programs continue to search for meaningful and efficient ways to evaluate the quality of education they provide and support ongoing program improvement. Despite flaws inherent in self-assessment, recent research suggests that aggregated self-assessments reliably rank aspects of competence attained during preclerkship MD training. Given the novelty of those observations, the purpose of this study was to test their generalizability by evaluating an MD program as a whole. The Readiness for Residency Survey (RfR) was developed and aligned with the published Readiness for Clerkship Survey (RfC), but focused on the competencies expected to be achieved at graduation. The RfC and RfR were administered electronically four months after the start of clerkship and six months after the start of residency, respectively. Generalizability and decision studies examined the extent to which specific competencies were achieved relative to one another. The reliability of scores assigned by a single resident was G = 0.32. However, a reliability of G = 0.80 could be obtained by averaging over as few as nine residents. Whereas highly rated competencies in the RfC resided within the CanMEDS domains of professional, communicator, and collaborator, five additional medical expert competencies emerged as strengths when the program was evaluated after completion by residents. Aggregated resident self-assessments obtained using the RfR reliably differentiate aspects of competence attained over four years of undergraduate training. The RfR and RfC together can be used as evaluation tools to identify areas of strength and weakness in an undergraduate medical education program.

Flexural Behaviour of Reinforced Fibrous Concrete Beams: Experiments and Analytical Modelling

International Nuclear Information System (INIS)

Hameed, R.; Sellier, A.; Turatsinze, A.; Duprat, F.

2013-01-01

Flexural behaviour of reinforced fibrous concrete beams was investigated in this research study. Two types of metallic fibers were studied: amorphous metallic fibers (FibraFlex fibers), and carbon steel hooked-end fibers (Dramix fibers). Four types of reinforced concretes were made: one control (without fibers) and three fibrous. Among three reinforced fibrous concretes, two contained fibers in mono form and one contained fibers in hybrid form. The total quantity of fibers in mono and hybrid forms was 20 kg/m3 and 40 kg/m3, respectively. Three point bending tests were performed according to European standards NF EN 14651 on beams of 150 x 150 mm cross section and length of 550 mm. The results showed that due to positive synergetic interaction between the two metallic fibers used, reinforced fibrous concret (RFC) beams containing fibers in hybrid form exhibited better response at all loading stages. Analytical model to predict ultimate moment capacity of the RFC beam of rectangular section was developed and is presented in this paper. Analytical results for ultimate moment were found to be in good agreement with experimental results. (author)

Arabidopsis thaliana defense response to the ochratoxin A-producing strain (Aspergillus ochraceus 3.4412).

Science.gov (United States)

Hao, Junran; Wu, Weihong; Wang, Yan; Yang, Zhuojun; Liu, Yang; Lv, Yangjun; Zhai, Yanan; Yang, Jing; Liang, Zhihong; Huang, Kunlun; Xu, Wentao

2015-05-01

OTA-producing strain Aspergillus ochraceus induced necrotic lesions, ROS accumulation and defense responses in Arabidopsis . Primary metabolic and defense-related proteins changed in proteomics. Ascorbate-glutathione cycle and voltage-dependent anion-selective channel proteins fluctuated. Mycotoxigenic fungi, as widespread contaminants by synthesizing mycotoxins in pre-/post-harvest infected plants and even stored commercial cereals, could usually induce plant-fungi defense responses. Notably, ochratoxin A (OTA) is a nephrotoxic, hepatotoxic, teratogenic, immunotoxic and phytotoxic mycotoxin. Herein, defense responses of model system Arabidopsis thaliana detached leaves to infection of Aspergillus ochraceus 3.4412, an OTA high-producing strain, were studied from physiological, proteomic and transcriptional perspectives. During the first 72 h after inoculation (hai), the newly formed hypersensitive responses-like lesions, decreased chlorophyll content, accumulated reactive oxygen species and upregulated defense genes expressions indicated the defense response was induced in the leaves with the possible earlier motivated jasmonic acid/ethylene signaling pathways and the later salicylic acid-related pathway. Moreover, proteomics using two-dimensional gel electrophoresis 72 hai showed 16 spots with significantly changed abundance and 13 spots corresponding to 12 unique proteins were successfully identified by MALDI-TOF/TOF MS/MS. Of these, six proteins were involved in basic metabolism and four in defense-related processes, which included glutathione-S-transferase F7, voltage-dependent anion-selective channel protein 3 (VDAC-3), osmotin-like protein OSM34 and blue copper-binding protein. Verified from proteomic and/or transcriptional perspectives, it is concluded that the primary metabolic pathways were suppressed with the ascorbate-glutathione cycle fluctuated in response to A. ochraceus and the modulation of VDACs suggested the possibility of structural damage and

Metal-free current collectors based on graphene materials for supecapacitors produced by 3D printing

Science.gov (United States)

Baskakov, S. A.; Baskakova, Yu. V.; Lyskov, N. V.; Dremova, N. N.; Shul'ga, Yu. M.

2017-10-01

Supercapacitor (SC) current collectors with electrodes made of graphite oxide reduced during microwave exfoliation are produced from a commercial filament with a graphene component via layer-by-layer fusing with a 3D printer. The separator is made of a graphene oxide film. The current collectors are investigated by means of IR spectroscopy. Electrochemical tests are performed for the assembled SC that include tests of its cyclic stability up to 1000 cycles.

Raman Spectroscopy of Two-Dimensional Bi2TexSe3 − x Platelets Produced by Solvothermal Method

Directory of Open Access Journals (Sweden)

Jian Yuan

2015-08-01

Full Text Available In this paper, we report a facile solvothermal method to produce both binary and ternary compounds of bismuth chalcogenides in the form of Bi2TexSe3 − x. The crystal morphology in terms of geometry and thickness as well as the stoichiometric ratio can be well controlled, which offers the opportunities to systematically investigate the relationship between microstructure and phonon scattering by Raman spectroscopy. Raman spectra of four compounds, i.e., Bi2Se3, Bi2Se2Te, Bi2SeTe2 and Bi2Te3, were collected at four different excitation photon energies (2.54, 2.41, 1.96, and 1.58 eV. It is found that the vibrational modes are shifted to higher frequency with more Se incorporation towards the replacement of Te. The dependence of Raman vibrational modes on excitation photon energy was investigated. As the excitation photon energy increases, three Raman vibrational modes (A1g1, Eg2 and A1g2 of the as-produced compounds move to low frequency. Three Infrared-active (IR-active modes were observed in thin topological insulators (TIs crystals.

Immunocytoadherence and sublethal irradiation

International Nuclear Information System (INIS)

Beaumariage, M.L.; Hiesche, K.; Revesz, L.; Haot, J.

1975-01-01

In sublethally irradiated CBA mice, the relative and absolute numbers of spontaneous rosette forming cells against sheep erythrocytes are markedly decreased in bone marrow. The decrease of the absolute number of spontaneous RFC is also important in the spleen in spite of an increase of the RFC relative number above the normal values between the 8th and 12th day after irradiation. The graft of normal bone marrow cells immediately after irradiation or the shielding of a medullary area during irradiation promotes the recovery of the immunocytoadherence capacity of the bone marrow cells but not of the spleen cells [fr

Annual review of the Institute of Plasma Physics, Nagoya University, for fiscal 1978

International Nuclear Information System (INIS)

1979-01-01

Activities of Institute of Plasma Physics, Nagoya University, from April 1978 to March 1979, are described in individual short summaries. As a main project, the JIPP T-II program aims at confinement and heating of hot plasmas in a tokamak/stellarator hybrid system. The STP-3 system for high beta pinch plasma has now almost been completed. Installation of the RFC-XX is now complete with the delivery of two rf oscillators for point cusp plugs. In high energy beam experiment, toroidal magnetic configurations maintained by intense relativistic currents were demonstrated. The Nagoya Bumpy Torus is a race track convertible to a circular torus. In parallel with the above research projects, there continued experiments on basic plasma physics, laser-produced plasma, the atomic processes and the surface physics related to the plasma-wall interaction. Theoretical and computational divisions worked in close collaboration with the above. (J.P.N.)

Comparative study of AISI M3:2 high speed steel produced through different techniques of manufacturing

International Nuclear Information System (INIS)

Araujo Filho, Oscar Olimpio de

2006-01-01

In this work AISI M3:2 high speed steels obtained through different techniques of manufacturing, submitted to the same heat treatment procedure were evaluated by measuring their mechanical properties of transverse rupture strength and hardness. Sinter 23 obtained by hot isostatic pressing (HIP), VWM3C obtained by the conventional route and a M3:2 high speed steel obtained by cold compaction of water atomized powders and vacuum sintered with and without the addition of a small quantity of carbon were evaluated after the same heat treatment procedure. The vacuum sintered M3:2 high speed steel can be an alternative to the more expensive high speed steel produced by hot isostatic pressing and with similar properties presented by the conventional one. The characterization of the vacuum sintered M3:2 high speed steel was performed by measuring the densities of the green compacts and after the sintering cycle. The sintering produced an acceptable microstructure and densities near to the theoretical. The transverse rupture strength was evaluated by means of three point bending tests and the hardness by means of Rockwell C and Vickers tests. The technique of scanning electronic microscopy (SEM) was used to evaluate the microstructure and to establish a relation with the property of transverse rupture strength. The structure was determined by means of X-ray diffraction (XRD) patterns and the retained austenite was detected to all the conditions of heat treatment. The main contribution of this work is to establish a relation between the microstructure and the mechanical property of transverse rupture strength and to evaluate the AISI M3:2 vacuum sintered high speed steel as an alternative to the similar commercial high speed steels. (author)

Producers give prices a boost

International Nuclear Information System (INIS)

Anon.

1992-01-01

Uranium producers came alive in August, helping spot prices crack the $8.00 barrier for the first time since March. The upper end of NUKEM's price range actually finished the month at $8.20. Scrambling to fulfill their long-term delivery contracts, producers dominate the market. In the span of three weeks, five producers came out for 2 million lbs U3O8, ultimately buying nearly 1.5 million lbs. One producer accounted for over half this volume. The major factor behind rising prices was that producers required specific origins to meet contract obligations. Buyers willing to accept open origins created the lower end of NUKEM's price range

Characterization of a bacteriocin-like substance produced from a novel isolated strain of Bacillus subtilis SLYY-3

Science.gov (United States)

Li, Junfeng; Li, Hongfang; Zhang, Yuanyuan; Duan, Xiaohui; Liu, Jie

2014-12-01

In the present research, the strain SLYY-3 was isolated from sediments of Jiaozhou Bay, Qingdao, China. The strain SLYY-3, which produced a bacteriocin-like substance (BLS), was characterized to be a strain of Bacillus subtillis by biochemical profiling and 16S rDNA sequence analysis. It is the first time to report that Bacillus subtilis from Jiaozhou Bay sediments could produce a BLS. The BLS of B. subtillis SLYY-3 exhibited strong inhibitory activity against gram-positive bacteria (including Staphylococcus aureus and B. subtillis) and some fungi (including Penicillium glaucum, Aspergillus niger and Aspergillus flavus). The antimicrobial activity was detected from culture in the exponential growth phase and reached its maximum when culture entered into stationary growth phase. It was thermo-tolerant even when being kept at 100°C for 60 min without losing any activity and stable over a wide pH range from 1.0 to 12.0 while being inactivated by proteolytic enzyme and trypsin, indicating the proteinaceous nature of the BLS. The BLS was purified by precipitation with hydrochloric acid (HCl) and gel filteration (Sephadex G-100). SDS-PAGE analysis of the extracellular peptides of SLYY-3 revealed a bacteriocin-like protein with a molecular mass of 66 kDa. Altogether, these characteristics indicate the potential of the BLS for food industry as a protection against pathogenic and spoilage microorganisms.

Telemetry Standards, IRIG Standard 106-17. Chapter 10. Digital Recording Standard

Science.gov (United States)

2017-07-01

IAW Subsection 10.4.2, or iSCSI (Ethernet) IAW Subsection 10.4.3. Recorder login and Chapter 6 CCM shall be transmitted and received using the SCSI...b. Login Security. The ground system shall invoke the iSCSI login phase with the LoginOperationalNegotiation stage. The SecurityNegotiation...the login phase not otherwise specified, the RMM and the ground station shall support the default values per RFC 3720. 10.9.3.4 FTP Data Access Method

Glutamate receptor antibodies directed against AMPA receptors subunit 3 peptide B (GluR3B) can be produced in DBA/2J mice, lower seizure threshold and induce abnormal behavior.

Science.gov (United States)

Ganor, Yonatan; Goldberg-Stern, Hadassa; Cohen, Ran; Teichberg, Vivian; Levite, Mia

2014-04-01

Anti-GluR3B antibodies (GluR3B Ab's), directed against peptide B/aa372-395 of GluR3 subunit of glutamate/AMPA receptors, are found in ∼35% of epilepsy patients, activate glutamate/AMPA receptors, evoke ion currents, kill neurons and damage the brain. We recently found that GluR3B Ab's also associate with neurological/psychiatric/behavioral abnormalities in epilepsy patients. Here we asked if GluR3B Ab's could be produced in DBA/2J mice, and also modulate seizure threshold and/or cause behavioral/motor impairments in these mice. DBA/2J mice were immunized with the GluR3B peptide in Complete Freund's Adjuvant (CFA), or with controls: ovalbumin (OVA), CFA, or phosphate-buffer saline (PBS). GluR3B Ab's and OVA Ab's were tested. Seizures were induced in all mice by the chemoconvulsant pentylenetetrazole (PTZ) at three time points, each time with less PTZ to avoid non-specific death. Behavior was examined in Open-Field, RotaRod and Grip tests. GluR3B Ab's were produced only in GluR3B-immunized mice, while OVA Ab's were produced only in OVA-immunized mice, showing high Ab's specificity. In GluR3B Ab's negative mice, seizure severity scores and percentages of animals developing generalized seizures declined in response to decreasing PTZ doses. In contrast, both parameters remained unchanged/high in the GluR3B Ab's positive mice, showing that these mice were more susceptible to seizures. The seizure scores associated significantly with the GluR3B Ab's levels. GluR3B Ab's positive mice were also more anxious in Open-Field test, fell faster in RotaRod test, and fell more in Grip test, compared to all the control mice. GluR3B Ab's are produced in DBA/2J mice, facilitate seizures and induce behavioral/motor impairments. This animal model can therefore serve for studying autoimmune epilepsy and abnormal behavior mediated by pathogenic anti-GluR3B Ab's. Copyright © 2014 Elsevier Ltd. All rights reserved.

Draft Genome Sequence of Bacillus velezensis OSY-S3, a Producer of Potent Antimicrobial Agents Active against Bacteria and Fungi

OpenAIRE

Gerst, Michelle M.; Yesil, Mustafa; Yousef, Ahmed E.

2018-01-01

ABSTRACT Bacillus velezensis OSY-S3 produces anti-Listeria, anti-Escherichia coli, and antifungal compounds. Additionally, fermentate of B. velezensis OSY-S3 culture removes Staphylococcus aureus biofilms effectively. The draft genome sequence of B. velezensis OSY-S3 reported here had a genome size of ~3.90 Mb and a G+C content of 46.5%.

29 CFR 780.213 - Produce business.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Produce business. 780.213 Section 780.213 Labor Regulations... Specific Situations Hatchery Operations § 780.213 Produce business. In some instances, hatcheries also engage in the produce business as such and commingle with the culled eggs and chickens other eggs and...

Chronically administered 3-nitropropionic acid produces selective lesions in the striatum and reduces muscle tonus.

Science.gov (United States)

Shimano, Y; Kumazaki, M; Sakurai, T; Hida, H; Fujimoto, I; Fukuda, A; Nishino, H

1995-12-01

Systemically administered 3-nitropropionic acid (3- NPA), irreversible inhibitor of succinate dehydrogenase, produced characteristic bilateral lesions in the striatum (STR) in the rat. Inside the lesion, neutrophils invaded and strong immunoreaction for IgG as well as complement factor C3b/C4b receptor (C3b/C4br) were observed. The core of the lesion lost the immunoreaction for glial fibrillary acidic protein (GFAP) while the marginal area had abundant GFAP-labeled astrocytes around the vessels. Intoxicated rats often became somnolent and were awkward in cooperative movement on a pole climbing test, but they had a quite good memory retention in a passive avoidance learning. Muscle tonus in some of the intoxicated rats became hypotonic with low voltage electromyogram (EMG) activity, especially in lower limbs. In summary, 3-NPA intoxicated rats had selective bilateral lesions in the STR and exhibited disturbances in a cooperative movement owing to the impairment in muscle tonus, thus it would be a useful animal model to deduce the central pathogenesis of Huntington's disease.

Evolution of a recombinant (gucoamylase-producing) strain of Fusarium venenatum A3/5 in chemostat culture.

Science.gov (United States)

Wiebe, M G; Robson, G D; Shuster, J; Trinci, A P

2001-04-20

Fusarium venenatum JeRS 325 is a transformant of strain A3/5 which produces Aspergillus niger glucoamylase (GAM) under the control of a Fusarium oxysporum trypsin-like protease promoter. The evolution of JeRS 325 was studied in glucose-limited chemostat cultures grown on NaNO3 or (NH4)2SO4 as the nitrogen source. Thirteen mutants which were more highly branched and four mutants which were more sparsely branched than the parental strain were isolated from the NaNO3 chemostat. The highly branched mutants detected in this chemostat did not displace the sparsely branched population. The mutants isolated from the NaNO3 chemostat complemented representative strains previously isolated from glucose-limited chemostat cultures of F. venenatum A3/5 grown on (NH4)2SO4, but showed little complementation between themselves. By contrast, a highly branched mutant isolated from the (NH4)2SO4 chemostat culture displaced the sparsely branched mycelial population. None of the mutants isolated from the NaNO3 or (NH4)2SO4 chemostats produced as much GAM as JeRS 325. Southern blot analysis showed that all except one mutant had lost copies of both the glucoamylase and the acetamidase (the selectable marker) genes. However, specific GAM production was not necessarily correlated with the extent of glaA gene loss observed. Further, 10 of the mutants had lost the ability to grow on acetamide as the sole nitrogen source, although they retained copies of the amdS gene. In competition studies, mutants which could not utilize acetamide displaced mutants which could. The presence of foreign DNA in JeRS 325 resulted in a reduced specific growth rate (compared to A3/5), but the presence of the foreign DNA did not prevent the evolution of the strain or the isolation of mutants which had improved growth rates. Copyright 2001 John Wiley & Sons, Inc.

Draft Genome Sequence of Bacillus velezensis OSY-S3, a Producer of Potent Antimicrobial Agents Active against Bacteria and Fungi.

Science.gov (United States)

Gerst, Michelle M; Yesil, Mustafa; Yousef, Ahmed E

2018-01-18

Bacillus velezensis OSY-S3 produces anti- Listeria , anti- Escherichia coli , and antifungal compounds. Additionally, fermentate of B. velezensis OSY-S3 culture removes Staphylococcus aureus biofilms effectively. The draft genome sequence of B. velezensis OSY-S3 reported here had a genome size of ~3.90 Mb and a G+C content of 46.5%. Copyright © 2018 Gerst et al.

A novel biosurfactant produced by Aureobasidium pullulans L3-GPY from a tiger lily wild flower, Lilium lancifolium Thunb.

Science.gov (United States)

Kim, Jong Shik; Lee, In Kyoung; Yun, Bong Sik

2015-01-01

Yeast biosurfactants are important biotechnological products in the food industry, and they have medical and cosmeceutical applications owing to their specific modes of action, low toxicity, and applicability. Thus, we have isolated and examined biosurfactant-producing yeast for various industrial and medical applications. A rapid and simple method was developed to screen biosurfactant-producing yeasts for high production of eco-friendly biosurfactants. Using this method, several potential niches of biosurfactant-producing yeasts, such as wild flowers, were investigated. We successfully selected a yeast strain, L3-GPY, with potent surfactant activity from a tiger lily, Lilium lancifolium Thunb. Here, we report the first identification of strain L3-GPY as the black yeast Aureobasidium pullulans. In addition, we isolated a new low-surface-tension chemical, designated glycerol-liamocin, from the culture supernatant of strain L3-GPY through consecutive chromatography steps, involving an ODS column, solvent partition, silica gel, Sephadex LH-20, and an ODS Sep-Pak cartridge column. The chemical structure of glycerol-liamocin, determined by mass spectrometry and nuclear magnetic resonance spectroscopy, indicates that it is a novel compound with the molecular formula C33H62O12. Furthermore, glycerol-liamocin exhibited potent biosurfactant activity (31 mN/m). These results suggest that glycerol-liamocin is a potential novel biosurfactantfor use in various industrial applications.

7 CFR 1006.13 - Producer milk.

Science.gov (United States)

2010-01-01

... Handling Definitions § 1006.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of components of skim milk) and butterfat contained in milk of a producer that is: (a) Received by the operator... (d) (1) through (3) of this section may be increased or decreased by the market administrator if the...

Avaliação do desempenho motor em indivíduos com paralisia cerebral após hipoterapia - doi: 10.5102/ucs.v10i2.1734

Directory of Open Access Journals (Sweden)

Marianne Lucena

2012-12-01

Full Text Available Este estudo teve como objetivo comparar escores de desempenho motor, antes e após sessões de hipoterapia através da escala de Medida da Função Motora Grossa (GMFM. Como método, foi realizado um estudo quantitativo descritivo de intervenção do tipo antes e depois, com 3 casos de paralisia cerebral (PC,de ambos os sexos, com idades entre 5 e 7 anos, escolhidos de forma não probabilista, com quadro motor de quadriplegia mista. Foi obtida, como resultado, FAB, RFC e BES apresentaram melhora de 88.35%, 96% e 31%, respectivamente na dimensão A deitar e rola e 16.65%, 31.66% e 33% na dimensão B: sentar. RFC e BES também apresentaram melhoras na dimensão C: engatinhar e ajoelhar de 2.38% e 40.47%, respectivamente. Este estudo conclui que indivíduos com PC melhoram controle de tronco e cervical, sendo que com os índices da escala GMFM foi possível quantificar os ganhos motores.

The feasibility of producing patient-specific acrylic cranioplasty implants with a low-cost 3D printer.

Science.gov (United States)

Tan, Eddie T W; Ling, Ji Min; Dinesh, Shree Kumar

2016-05-01

OBJECT Commercially available, preformed patient-specific cranioplasty implants are anatomically accurate but costly. Acrylic bone cement is a commonly used alternative. However, the manual shaping of the bone cement is difficult and may not lead to a satisfactory implant in some cases. The object of this study was to determine the feasibility of fabricating molds using a commercial low-cost 3D printer for the purpose of producing patient-specific acrylic cranioplasty implants. METHODS Using data from a high-resolution brain CT scan of a patient with a calvarial defect posthemicraniectomy, a skull phantom and a mold were generated with computer software and fabricated with the 3D printer using the fused deposition modeling method. The mold was used as a template to shape the acrylic implant, which was formed via a polymerization reaction. The resulting implant was fitted to the skull phantom and the cranial index of symmetry was determined. RESULTS The skull phantom and mold were successfully fabricated with the 3D printer. The application of acrylic bone cement to the mold was simple and straightforward. The resulting implant did not require further adjustment or drilling prior to being fitted to the skull phantom. The cranial index of symmetry was 96.2% (the cranial index of symmetry is 100% for a perfectly symmetrical skull). CONCLUSIONS This study showed that it is feasible to produce patient-specific acrylic cranioplasty implants with a low-cost 3D printer. Further studies are required to determine applicability in the clinical setting. This promising technique has the potential to bring personalized medicine to more patients around the world.

Thermal reactions of uranium metal, UO 2, U 3O 8, UF 4, and UO 2F 2 with NF 3 to produce UF 6

Science.gov (United States)

McNamara, Bruce; Scheele, Randall; Kozelisky, Anne; Edwards, Matthew

2009-11-01

This paper demonstrates that NF 3 fluorinates uranium metal, UO 2, UF 4, UO 3, U 3O 8, and UO 2F 2·2H 2O to produce the volatile UF 6 at temperatures between 100 and 550 °C. Thermogravimetric and differential thermal analysis reaction profiles are described that reflect changes in the uranium fluorination/oxidation state, physiochemical effects, and instances of discrete chemical speciation. Large differences in the onset temperatures for each system investigated implicate changes in mode of the NF 3 gas-solid surface interaction. These studies also demonstrate that NF 3 is a potential replacement fluorinating agent in the existing nuclear fuel cycle and in actinide volatility reprocessing.

The application of protein markers in conversion of maize inbred lines to the cytoplasmic male sterility basis

Directory of Open Access Journals (Sweden)

Stevanovic Milan

2016-01-01

Full Text Available A total of seven maize inbred lines of different origin and maturity group were used in the trial set up according to the split-plot randomized complete block design in five environments. Each inbred was observed in five variants: original inbred (N; cytoplasmic male sterile C-type (CMS-C; restorer for CMS-C (RfC; cytoplasmic male sterile S-type (CMS-S and restorer for CMS-S (RfS. The objective was to compare grain yield of original inbreds and their CMS and Rf variants and to apply Isoelectric focusing (IEF to determine whether the conversion of original inbreds to their CMS and Rf counterparts have been done completely. Protein markers have shown that conversion of almost all inbreds was done good and completely. Only original inbreds ZPL2 and ZPL5 did not concur on banding patterns with their RfC variants. The type of cytoplasm had a very significant impact on grain yield. Namely, CMS-C counterparts significantly out yielded their CMS-S versions, while the inbreds with C and S cytoplasm over yielded inbreds with N cytoplasm, as well as their RfC and RfS versions.

Interface behaviour of Al2O3/Ti joints produced by liquid state bonding

International Nuclear Information System (INIS)

Lemus R, J.; Guevara L, A. O.; Zarate M, J.

2014-08-01

The main objective of this work was to determine various aspects during brazing of Al 2 O 3 samples to commercially titanium alloy grade 4 with biocompatibility properties, using a Au-foil as joining element. Al 2 O 3 ceramic was previously produced by sintering of powder cylindrical shape at 1550 grades C for 120 minutes. Previously to joining experiments, the surface of Al 2 O 3 samples were coating, by chemical vapor depositions (CVD) process, with a Mo layer of 2 and 4 μm thick and then stacked together with the Ti samples. Joining experiments were carried out on Al 2 O 3 -Mo/Au/Ti combinations at temperature of 1100 grades C using different holding times under vacuum atmosphere. The experimental results show a successful joining Mo-Al 2 O 3 to Ti. Analysis by scanning electron microscopy (Sem) revealed that joining of Al 2 O 3 to metal occurred by the formation of a homogeneous diffusion zone with no interfacial cracking or porosity at the interface. Results by electron probe micro analysis (EPMA) of Al 2 O 3 -Mo/Au/Ti combinations revealed that Mo traveled inside the joining elements and remained as solid solutions, however during cooling process Mo had a tendency to stay as a precipitate phase and atomic distributions of elements show a concentration line of Mo inside the joining element Au. On the other hand, well interaction of Ti with Au form different phases; like Ti 3 Au and Ti Au. (author)

Use of a solid-phase 3H-radioimmunoassay for the measurement of immunoglobulin produced in short-term cultures of antibody-secreting cells

International Nuclear Information System (INIS)

Mongini, P.K.A.; Heber-Katz, E.

1982-01-01

A solid-phase radioimmunoassay (RIA) for assaying immunoglobulin produced from antibody-secreting myeloma, hybridoma and immune spleen cells is described. Specific antibody is detected by culturing antibody-producing cells on antigen-coated flexible polyvinylchloride microtiter wells, washing away the cells, and measuring the bound specific antibody with tritiated affinity-purified anti-isotype reagents. Antibody produced from 10 3 myeloma cells can be detected with as little as 4 h of incubation. With 24-48 h of incubation, antibody from as few as approximately 3-15 myeloma, hybridoma or immune spleen plaque-forming cells (PFC) can be detected. This culture-well RIA has certain distinct advantages over the hemolytic PFC assay and RIA assays in which antibody in culture supernatants is measured. (Auth.)

Nonlinear optical waveguides produced by MeV ion implantation in LiNbO3

International Nuclear Information System (INIS)

Sarkisov, S.S.; Curley, M.J.; Williams, E.K.; Ila, D.; Svetchnikov, V.L.; Zandbergen, H.W.; Zykov, G.A.; Banks, C.; Wang, J.-C.; Poker, D.B.; Hensley, D.K.

2000-01-01

We analyze microstructure, linear and nonlinear optical properties of planar waveguides produced by implantation of MeV Ag ions into LiNbO 3 . Linear optical properties are described by the parameters of waveguide propagation modes and optical absorption spectra. Nonlinear properties are described by the nonlinear refractive index. Operation of the implanted crystal as an optical waveguide is due to modification of the linear refractive index of the implanted region. The samples as implanted do not show any light-guiding. The implanted region has amorphous and porous microstructure with the refractive index lower than the substrate. Heat treatment of the implanted samples produces planar light-guiding layer near the implanted surface. High-resolution electron microscopy reveals re-crystallization of the host between the surface and the nuclear stopping region in the form of randomly oriented crystalline grains. They make up a light-guiding layer isolated from the bulk crystal by the nuclear stopping layer with low refractive index. Optical absorption of the sample as implanted has a peak at 430 nm. This peak is due to the surface plasmon resonance in nano-clusters of metallic silver. Heat treatment of the samples shifts the absorption peak to 545 nm. This is more likely due to the increase of the refractive index back to the value for the crystalline LiNbO 3 . The nonlinear refractive index of the samples at 532 nm (of the order of 10 -10 cm 2 W -1 ) was measured with the Z-scan technique using a picosecond laser source. Possible applications of the waveguides include ultra-fast photonic switches and modulators

Either brain-derived neurotrophic factor or neurotrophin-3 only neurotrophin-producing grafts promote locomotor recovery in untrained spinalized cats.

Science.gov (United States)

Ollivier-Lanvin, Karen; Fischer, Itzhak; Tom, Veronica; Houlé, John D; Lemay, Michel A

2015-01-01

Background. Transplants of cellular grafts expressing a combination of 2 neurotrophic factors, brain-derived neurotrophic factor (BDNF) and neurotrophin-3 (NT-3) have been shown to promote and enhance locomotor recovery in untrained spinalized cats. Based on the time course of recovery and the absence of axonal growth through the transplants, we hypothesized that recovery was due to neurotrophin-mediated plasticity within the existing locomotor circuitry of the lumbar cord. Since BDNF and NT-3 have different effects on axonal sprouting and synaptic connectivity/strengthening, it becomes important to ascertain the contribution of each individual neurotrophins to recovery. Objective. We studied whether BDNF or NT-3 only producing cellular grafts would be equally effective at restoring locomotion in untrained spinal cats. Methods. Rat fibroblasts secreting one of the 2 neurotrophins were grafted into the T12 spinal transection site of adult cats. Four cats in each group (BDNF alone or NT-3 alone) were evaluated. Locomotor recovery was tested on a treadmill at 3 and 5 weeks post-transection/grafting. Results. Animals in both groups were capable of plantar weight-bearing stepping at speed up to 0.8 m/s as early as 3 weeks and locomotor capabilities were similar at 3 and 5 weeks for both types of graft. Conclusions. Even without locomotor training, either BDNF or NT-3 only producing grafts promote locomotor recovery in complete spinal animals. More clinically applicable delivery methods need to be developed. © The Author(s) 2014.

Closed-Cycle Hydrogen-Oxygen Regenerative Fuel Cell at the NASA Glenn Research Center-An Update

Science.gov (United States)

Bents, David J.; Chang, Bei-Jiann; Johnson, Donald W.; Garcia, Christopher P.

2008-01-01

The closed cycle hydrogen-oxygen proton exchange membrane (PEM) regenerative fuel cell (RFC) at the NASA Glenn Research Center has demonstrated multiple back-to-back contiguous cycles at rated power and round-trip efficiencies up to 52 percent. It is the first fully closed cycle RFC ever demonstrated. (The entire system is sealed; nothing enters or escapes the system other than electrical power and heat.) During fiscal year fiscal year (FY) FY06 to FY07, the system s numerous modifications and internal improvements focused on reducing parasitic power, heat loss, and noise signature; increasing its functionality as an unattended automated energy storage device; and in-service reliability.

Defect structures in YBa2Cu3O/sub 7-x/ produced by electron irradiation

International Nuclear Information System (INIS)

Kirk, M.A.; Baker, M.C.; Liu, J.Z.; Lam, D.J.; Weber, H.W.

1987-12-01

Defect structures in YBa 2 Cu 3 O/sub 7-x/ produced by electron irradiation at 300 0 K were investigated by transmission electron microscopy. Threshold energies for the production of visible defects were determined to be 152 keV and 131 keV (+- 7 keV) in directions near the a and b (b > a) axes (both perpendicular to c, the long axis in the orthorhombic structure), respectively. During above threshold irradiations in an electron flux of 3 x 10 18 cm -2 s -1 , extended defects were observed to form and grow to sizes of 10 to 50 nm over 1000 s in material thicknesses 20 to 200 nm. Such low electron threshold energies suggest oxygen atom displacements with recoil energies near 20 eV. The observation of movement of twin boundaries during irradiation just above threshold suggests movement of the basal plane oxygen atoms by direct displacement or defect migration processes. Crystals irradiated above threshold were observed after about 24 hours to have transformed to a structure heavily faulted on planes perpendicular to the c axis. 3 refs., 3 figs

Structural, thermal, and photoacoustic study of nanocrystalline Cr{sub 3}Ge produced by mechanical alloying

Energy Technology Data Exchange (ETDEWEB)

Prates, P. B.; Maliska, A. M.; Ferreira, A. S. [Departamento de Engenharia Mecânica, Universidade Federal de Santa Catarina, Campus Universitário Trindade, S/N, C.P. 476, 88040-900 Florianópolis, Santa Catarina (Brazil); Poffo, C. M. [Universidade Federal de Santa Catarina, Campus de Araranguá, 88900-000 Araranguá, Santa Catarina (Brazil); Borges, Z. V. [Departamento de Física, Universidade Federal do Amazonas, 3000 Japiim, 69077-000 Manaus, Amazonas (Brazil); Lima, J. C. de, E-mail: fsc1jcd@fisica.ufsc.br [Departamento de Física, Universidade Federal de Santa Catarina, Campus Universitário Trindade, S/N, C.P. 476, 88040-900 Florianópolis, Santa Catarina (Brazil); Biasi, R. S. de [Seção de Engenharia Mecânica e de Materiais, Instituto Militar de Engenharia, 22290-270 Rio de Janeiro (Brazil)

2015-10-21

A thermodynamic analysis of the Cr-Ge system suggested that it was possible to produce a nanostructured Cr{sub 3}Ge phase by mechanical alloying. The same analysis showed that, due to low activation energies, Cr-poor crystalline and/or amorphous alloy could also be formed. In fact, when the experiment was performed, Cr{sub 11}Ge{sub 19} and amorphous phases were present for small milling times. For milling times larger than 15 h these additional phases decomposed and only the nanostructured Cr{sub 3}Ge phase remained up to the highest milling time used (32 h). From the differential scanning calorimetry measurements, the Avrami exponent n was obtained, indicating that the nucleation and growth of the nanostructured Cr{sub 3}Ge phase may be restricted to one or two dimensions, where the Cr and Ge atoms diffuse along the surface and grain boundaries. In addition, contributions from three-dimensional diffusion with a constant nucleation rate may be present. The thermal diffusivity of the nanostructured Cr{sub 3}Ge phase was determined by photoacoustic absorption spectroscopy measurements.

The effects of BIG-3 on osteoblast differentiation are not dependent upon endogenously produced BMPs

International Nuclear Information System (INIS)

Gori, Francesca; Demay, Marie B.

2005-01-01

BMPs play an important role in both intramembranous and endochondral ossification. BIG-3, BMP-2-induced gene 3 kb, encodes a WD-40 repeat protein that accelerates the program of osteoblastic differentiation in vitro. To examine the potential interactions between BIG-3 and the BMP-2 pathway during osteoblastic differentiation, MC3T3-E1 cells stably transfected with BIG-3 (MC3T3E1-BIG-3), or with the empty vector (MC3T3E1-EV), were treated with noggin. Noggin treatment of pooled MC3T3E1-EV clones inhibited the differentiation-dependent increase in AP activity observed in the untreated MC3T3E1-EV clones but did not affect the increase in AP activity in the MC3T3E1-BIG-3 clones. Noggin treatment decreased the expression of Runx2 and type I collagen mRNAs and impaired mineralized matrix formation in MC3T3E1-EV clones but not in MC3T3E1-BIG-3 clones. To determine whether the actions of BIG-3 on osteoblast differentiation converged upon the BMP pathway or involved an alternate signaling pathway, Smad1 phosphorylation was examined. Basal phosphorylation of Smad1 was not altered in the MC3T3E1-BIG-3 clones. However, these clones did not exhibit the noggin-dependent decrease in phosphoSmad1 observed in the MC3T3E1-EV clones, nor did it decrease nuclear localization of phosphoSmad1. These observations suggest that BIG-3 accelerates osteoblast differentiation in MC3T3-E1 cells by inducing phosphorylation and nuclear translocation of Smad1 independently of endogenously produced BMPs

Bacteriocin-producing Enterococci from Rabbit Meat

Directory of Open Access Journals (Sweden)

Szabóová, R.

2012-01-01

Full Text Available Aims: Enterococci are lactic acid bacteria belonging to the division Firmicutes. They occur in different ecosystems, rabbits including. Enterococci can possess probiotic properties and produce antimicrobial substances-bacteriocins. Rabbit meat as nutritionally healthy food offers novel source to study bacteriocin-producing and/or probiotic enterococci. Methodology and results: Enterococci were detected from rabbit meat samples (42. Most of the isolates were allotted to the species Enterococcus faecium by PCR method. The isolates have possessed the structural genes for enterocins A, P, B production. The inhibitory substances produced by the isolated enterococci inhibited the growth of 12 indicators. Of 34 isolates, 15 strains have shown the antimicrobial activity against L. monocytogenes CCM 4699, 12 strains against S. aureus 3A3, 10 strains against S. aureus 5A2 as well as Salmonella enterica serovar Enteritidis PT4. Moreover, enterococci have tolerated 5 % bile, low pH; they have produced lactid acid in the amount from 0.740 ± 0.091 to 1.720 ± 0.095 mmol/l. The isolates were mostly sensitive to antibiotics. Conclusion, significance and impact of study: Bacteriocin-producing strain E. faecium M3a has been selected for more detail characterization of its bacteriocin and probiotic properties with the aim for its further application as an additive.

Emergence and outbreak of carbapenemase-producing KPC-3 Klebsiella pneumoniae in Spain, September 2009 to February 2010: control measures.

Science.gov (United States)

Robustillo Rodela, A; Díaz-Agero Pérez, C; Sanchez Sagrado, T; Ruiz-Garbajosa, P; Pita López, M J; Monge, V

2012-02-16

This report describes the epidemiological features of the first outbreak caused by KPC3 carbapenemase-producing Klebsiella pneumoniae (KPC-3-KP) in Spain and how it was effectively controlled. From 16 September 2009 to the end of February 2010, seven patients infected or colonised with KPC-3-KP were detected. Stool surveillance cultures were recovered from patients, doctors, nurses, nursing assistants, cleaners and hospital porters working in the affected units. Hand swabs were taken from workers and patients’ relatives for culturing. Environmental samples were also taken. Patients infected or colonised with KPC-3-KP were placed in single rooms under contact precautions and 4% chlorhexidine soap was used for their daily hygiene. Staff attended educational seminars and workshops on hand hygiene and isolation of patients. An alcohol-based disinfectant was used for surface cleaning and disinfecting. The floor was cleaned with a disinfectant containing benzalkonium chloride and didecyldimethylammonium. All samples collected were negative for KPC-3-KP. After implementing the control measures, no further cases were reported in the affected units. All cases had comorbidities, long hospital stay and aggressive/intensive antimicrobial treatment. This study emphasises the importance of early intensification of infection control to interrupt the transmission of KPC-producing organisms.

Detection of cfxA2, cfxA3, and cfxA6 genes in beta-lactamase producing oral anaerobes

Directory of Open Access Journals (Sweden)

Buhle BINTA

2016-04-01

Full Text Available ABSTRACT Purpose The aim of this study was to identify β-lactamase-producing oral anaerobic bacteria and screen them for the presence of cfxA and BlaTEM genes that are responsible for β-lactamase production and resistance to β-lactam antibiotics. Material and Methods Periodontal pocket debris samples were collected from 48 patients with chronic periodontitis and anaerobically cultured on blood agar plates with and without β-lactam antibiotics. Presumptive β-lactamase-producing isolates were evaluated for definite β-lactamase production using the nitrocefin slide method and identified using the API Rapid 32A system. Antimicrobial susceptibility was performed using disc diffusion and microbroth dilution tests as described by CLSI Methods. Isolates were screened for the presence of the β-lactamase-TEM (BlaTEM and β-lactamase-cfxA genes using Polymerase Chain Reaction (PCR. Amplified PCR products were sequenced and the cfxA gene was characterized using Genbank databases. Results Seventy five percent of patients carried two species of β-lactamase-producing anaerobic bacteria that comprised 9.4% of the total number of cultivable bacteria. Fifty one percent of β-lactamase-producing strains mainly Prevotella, Porphyromonas, and Bacteroides carried the cfxA gene, whereas none of them carried blaTEM. Further characterization of the cfxA gene showed that 76.7% of these strains carried the cfxA2 gene, 14% carried cfxA3, and 9.3% carried cfxA6. The cfxA6 gene was present in three Prevotella spp. and in one Porphyromonas spp. Strains containing cfxA genes (56% were resistant to the β-lactam antibiotics. Conclusion This study indicates that there is a high prevalence of the cfxA gene in β-lactamase-producing anaerobic oral bacteria, which may lead to drug resistance and treatment failure.

Hepatic Flavin-Containing Monooxygenase 3 Enzyme Suppressed by Type 1 Allergy-Produced Nitric Oxide.

Science.gov (United States)

Tanino, Tadatoshi; Bando, Toru; Komada, Akira; Nojiri, Yukie; Okada, Yuna; Ueda, Yukari; Sakurai, Eiichi

2017-11-01

Flavin-containing monooxygenases (FMOs) are major mammalian non-cytochrome P450 oxidative enzymes. T helper 2 cell-activated allergic diseases produce excess levels of nitric oxide (NO) that modify the functions of proteins. However, it remains unclear whether allergy-induced NO affects the pharmacokinetics of drugs metabolized by FMOs. This study investigated alterations of hepatic microsomal FMO1 and FMO3 activities in type 1 allergic mice and further examined the interaction of FMO1 and FMO3 with allergy-induced NO. Imipramine (IMP; FMO1 substrate) N- oxidation activity was not altered in allergic mice with high serum NO and immunoglobulin E levels. At 7 days after primary sensitization (PS7) or secondary sensitization (SS7), benzydamine (BDZ; FMO1 and FMO3 substrate) N- oxygenation was significantly decreased to 70% of individual controls. The expression levels of FMO1 and FMO3 proteins were not significantly changed in the sensitized mice. Hepatic inducible NO synthase (iNOS) mRNA level increased 5-fold and 15-fold in PS7 and SS7 mice, respectively, and hepatic tumor necrosis factor- α levels were greatly enhanced. When a selective iNOS inhibitor was injected into allergic mice, serum NO levels and BDZ N- oxygenation activity returned to control levels. NO directly suppressed BDZ N- oxygenation, which was probably related to FMO3-dependent metabolism in comparison with IMP N- oxidation. In hepatic microsomes from PS7 and SS7 mice, the suppression of BDZ N- oxygenation was restored by ascorbate. Therefore, type 1 allergic mice had differentially suppressed FMO3-dependent BDZ N- oxygenation. The suppression of FMO3 metabolism related to reversible S- nitrosyl modifications of iNOS-derived NO. NO is expected to alter FMO3-metabolic capacity-limited drug pharmacokinetics in humans. Copyright © 2017 by The American Society for Pharmacology and Experimental Therapeutics.

Improvement in ductility of high strength polycrystalline Ni-rich Ni{sub 3}Al alloy produced by EB-PVD

Energy Technology Data Exchange (ETDEWEB)

Sun, J.Y.; Pei, Y.L.; Li, S.S.; Zhang, H.; Gong, S.K., E-mail: gongsk@buaa.edu.cn

2014-11-25

Highlights: • High strength and high ductility of polycrystalline Ni-rich Ni{sub 3}Al alloy sheets were produced. • The elongation could be enhanced from ∼0.5% to ∼14.6% by microstructural control. • The fracture strength (∼820 MPa) was enhanced by the precipitation strengthening. • This work provides a general processing for repairing the worn single crystal blades. - Abstract: A 300 μm Ni-rich Ni{sub 3}Al sheet was produced by electron beam physical vapor deposition (EB-PVD) and followed by different heat treatments to obtain fine γ′/γ two-phase structures with large elongation. Tensile testing was performed at room-temperature, and the corresponding mechanisms were investigated in detail. Results indicated that the as-deposited Ni{sub 3}Al alloy exhibited non-equilibrium directional columnar crystal, and transited to equiaxed crystal with uniformly distributed tough γ phase after heat treatment. Meanwhile, the fracture mechanism transited from brittleness to a mixture of ductility and brittleness modes. With an appropriate heat treatment, high strength (ultimate tensile strength obtained 828 MPa) and high ductility (elongation obtained 14.6%) Ni{sub 3}Al alloy has been achieved, which was due to the mesh network microstructure. A series of transmission electron microscope (TEM) characterizations confirmed that the increasing flow stress of Ni{sub 3}Al alloy was attributed to the cubical secondary γ′ phase precipitates (25–50 nm) within the γ phase. This work provides a potential strategy for repairing the worn tip of single crystal engine blades using Ni-rich Ni{sub 3}Al alloy by EB-PVD.

Research on the Solid State Fermentation of Jerusalem Artichoke Pomace for Producing R,R-2,3-Butanediol by Paenibacillus polymyxa ZJ-9.

Science.gov (United States)

Cao, Can; Zhang, Li; Gao, Jian; Xu, Hong; Xue, Feng; Huang, Weiwei; Li, Yan

2017-06-01

R,R-2,3-butanediol (R,R-2,3-BD) was produced by Paenibacillus polymyxa ZJ-9, which was capable of utilizing inulin without previous hydrolysis. The Jerusalem artichoke pomace (JAP) derived from the conversion of Jerusalem artichoke powder into inulin extract, which was usually used for biorefinery by submerged fermentation (SMF), was utilized in solid state fermentation (SSF) to produce R,R-2,3-BD. In this study, the fermentation parameters of SSF were optimized and determined in flasks. A novel bioreactor was designed and assembled for the laboratory scale-up of SSF, with a maximum yield of R,R-2,3-BD (67.90 g/kg (JAP)). This result is a 36.3% improvement compared with the flasks. Based on the same bath of Jerusalem artichoke powder, the total output of R,R-2,3-BD increased by 38.8% for the SSF of JAP combined with the SMF of inulin extraction. Overall, the utilization of JAP for R,R-2,3-BD production was beneficial to the comprehensive utilization of Jerusalem artichoke tuber.

Olsenella scatoligenes sp. nov., a 3-methylindole- (skatole) and 4-methylphenol- (p-cresol) producing bacterium isolated from pig faeces

DEFF Research Database (Denmark)

Li, Xiaoqiong; Jensen, Rikke Lassen; Højberg, Ole

2015-01-01

Strain SK9K4T, which is a strictly anaerobic, non-motile, non-sporulating, Gram-stain-positive, saccharolytic coccobacillus, was isolated from pig faeces. SK9K4T metabolized indol-3-acetic acid to 3-methylindole (skatole), which is the main contributor to boar taint; it also produced 4-methylphenol......+C content was 62.1 mol% and the major cellular fatty acids (constituting .10% of the total) were C14 : 0 and C18 : 1v9c. The major end product of glucose fermentation was lactic acid, with minor amounts of acetic acid and formic acid; no H2 was produced. Discrepancies in the fatty acid profiles, the MALDI...... (p-cresol) from p-hydroxyphenylacetic acid. Phylogenetic analyses, based on 16S rRNA gene sequences, revealed that the isolate represented a new lineage within the genus Olsenella of the family Atopobiaceae. Strain SK9K4T was most closely related to the type strains of the three species of the genus...

Infrared absorption of CH{sub 3}OSO and CD{sub 3}OSO radicals produced upon photolysis of CH{sub 3}OS(O)Cl and CD{sub 3}OS(O)Cl in p-H{sub 2} matrices

Energy Technology Data Exchange (ETDEWEB)

Lee, Yu-Fang; Kong, Lin-Jun [Department of Applied Chemistry and Institute of Molecular Science, National Chiao Tung University, 1001 Ta-Hsueh Rd., Hsinchu 30010, Taiwan (China); Lee, Yuan-Pern [Department of Applied Chemistry and Institute of Molecular Science, National Chiao Tung University, 1001 Ta-Hsueh Rd., Hsinchu 30010, Taiwan (China); Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 10617, Taiwan (China)

2012-03-28

Irradiation at 239 {+-} 20 nm of a p-H{sub 2} matrix containing methoxysulfinyl chloride, CH{sub 3}OS(O)Cl, at 3.2 K with filtered light from a medium-pressure mercury lamp produced infrared (IR) absorption lines at 3028.4 (attributable to {nu}{sub 1}, CH{sub 2} antisymmetric stretching), 2999.5 ({nu}{sub 2}, CH{sub 3} antisymmetric stretching), 2950.4 ({nu}{sub 3}, CH{sub 3} symmetric stretching), 1465.2 ({nu}{sub 4}, CH{sub 2} scissoring), 1452.0 ({nu}{sub 5}, CH{sub 3} deformation), 1417.8 ({nu}{sub 6}, CH{sub 3} umbrella), 1165.2 ({nu}{sub 7}, CH{sub 3} wagging), 1152.1 ({nu}{sub 8}, S=O stretching mixed with CH{sub 3} rocking), 1147.8 ({nu}{sub 9}, S=O stretching mixed with CH{sub 3} wagging), 989.7 ({nu}{sub 10}, C-O stretching), and 714.5 cm{sup -1} ({nu}{sub 11}, S-O stretching) modes of syn-CH{sub 3}OSO. When CD{sub 3}OS(O)Cl in a p-H{sub 2} matrix was used, lines at 2275.9 ({nu}{sub 1}), 2251.9 ({nu}{sub 2}), 2083.3 ({nu}{sub 3}), 1070.3 ({nu}{sub 4}), 1056.0 ({nu}{sub 5}), 1085.5 ({nu}{sub 6}), 1159.7 ({nu}{sub 7}), 920.1 ({nu}{sub 8}), 889.0 ({nu}{sub 9}), 976.9 ({nu}{sub 10}), and 688.9 ({nu}{sub 11}) cm{sup -1} appeared and are assigned to syn-CD{sub 3}OSO; the mode numbers correspond to those used for syn-CH{sub 3}OSO. The assignments are based on the photolytic behavior and a comparison of observed vibrational wavenumbers, infrared intensities, and deuterium isotopic shifts with those predicted with the B3P86/aug-cc-pVTZ method. Our results extend the previously reported four transient IR absorption bands of gaseous syn-CH{sub 3}OSO near 2991, 2956, 1152, and 994 cm{sup -1} to 11 lines, including those associated with C-O, O-S, and S=O stretching modes. Vibrational wavenumbers of syn-CD{sub 3}OSO are new. These results demonstrate the advantage of a diminished cage effect of solid p-H{sub 2} such that the Cl atom, produced via UV photodissociation of CH{sub 3}OS(O)Cl in situ, might escape from the original cage to yield isolated CH{sub 3}OSO

Evaluation of Subsurface Flow and Free-water Surface Wetlands Treating NPR-3 Produced Water - Year No. 1

International Nuclear Information System (INIS)

Myers, J. E.; Jackson, L. M.

2001-01-01

This paper is a summary of some of the activities conducted during the first year of a three-year cooperative research and development agreement (CRADA) between the Department of Energy (DOE) Rocky Mountain Oilfield Testing Center (RMOTC) and Texaco relating to the treatment of produced water by constructed wetlands. The first year of the CRADA is for design, construction and acclimation of the wetland pilot units. The second and third years of the CRADA are for tracking performance of pilot wetlands as the plant and microbial communities mature. A treatment wetland is a proven technology for the secondary and tertiary treatment of produced water, storm water and other wastewaters. Treatment wetlands are typically classified as either free-water surface (FWS) or subsurface flow (SSF). Both FWS and SSF wetlands work well when properly designed and operated. This paper presents a collection of kinetic data gathered from pilot units fed a slipstream of Wyoming (NPR-3) produced water. The pilot units are set up outdoors to test climatic influences on treatment. Monitoring parameters include evapotranspiration, plant growth, temperature, and NPDES discharge limits. The pilot wetlands (FWS and SSF) consist of a series of 100-gal plastic tubs filled with local soils, gravel, sharp sand and native wetland plants (cattail (Typha spp.), bulrush (Scirpus spp.), dwarf spikerush (Eleocharis)). Feed pumps control hydraulic retention time (HRT) and simple water control structures control the depth of water. The treated water is returned to the existing produced water treatment system. All NPDES discharge limits are met. Observations are included on training RMOTC summer students to do environmental work

29 CFR 779.108 - Goods produced for commerce.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Goods produced for commerce. 779.108 Section 779.108 Labor... Coverage Employees Engaged in Commerce Or in the Production of Goods for Commerce § 779.108 Goods produced for commerce. Goods are “produced for commerce” if they are “produced, manufactured, mined, handled or...

Mechanistic insights of intestinal absorption and renal conservation of folate in chronic alcoholism.

Science.gov (United States)

Wani, Nissar Ahmad; Thakur, Shilpa; Najar, Rauf Ahmad; Nada, Ritambhara; Khanduja, Krishan Lal; Kaur, Jyotdeep

2013-03-01

Folate mediated one-carbon metabolism is of fundamental importance for various cellular processes, including DNA synthesis and methylation of biological molecules. Due to the exogenous requirement of folate in mammals, there exists a well developed epithelial folate transport system for regulation of normal folate homeostasis. The intestinal and renal folate uptake is tightly and diversely regulated and disturbances in folate homeostasis like in alcoholism have pathological consequences. The study was sought to delineate the regulatory mechanism of folate uptake in intestine and reabsorption in renal tubular cells that could evaluate insights of malabsorption during alcoholism. The folate transporters PCFT and RFC were found to be associated with lipid rafts of membrane surfaces in intestine and kidney. Importantly, the observed lower intestinal and renal folate uptake was associated with decreased levels of folate transporter viz. PCFT and RFC in lipid rafts of intestinal and renal membrane surfaces. The decreased association of folate transporters in lipid rafts was associated with decreased protein and mRNA levels. In addition, immunohistochemical studies showed that alcoholic conditions deranged that localization of PCFT and RFC. These findings could explain the possible mechanistic insights that may result in folate malabsorption during alcoholism. Copyright © 2013 Elsevier Inc. All rights reserved.

Combinations of mutant FAD2 and FAD3 genes to produce high oleic acid and low linolenic acid soybean oil.

Science.gov (United States)

Pham, Anh-Tung; Shannon, J Grover; Bilyeu, Kristin D

2012-08-01

High oleic acid soybeans were produced by combining mutant FAD2-1A and FAD2-1B genes. Despite having a high oleic acid content, the linolenic acid content of these soybeans was in the range of 4-6 %, which may be high enough to cause oxidative instability of the oil. Therefore, a study was conducted to incorporate one or two mutant FAD3 genes into the high oleic acid background to further reduce the linolenic acid content. As a result, soybean lines with high oleic acid and low linolenic acid (HOLL) content were produced using different sources of mutant FAD2-1A genes. While oleic acid content of these HOLL lines was stable across two testing environments, the reduction of linolenic acid content varied depending on the number of mutant FAD3 genes combined with mutant FAD2-1 genes, on the severity of mutation in the FAD2-1A gene, and on the testing environment. Combination of two mutant FAD2-1 genes and one mutant FAD3 gene resulted in less than 2 % linolenic acid content in Portageville, Missouri (MO) while four mutant genes were needed to achieve the same linolenic acid in Columbia, MO. This study generated non-transgenic soybeans with the highest oleic acid content and lowest linolenic acid content reported to date, offering a unique alternative to produce a fatty acid profile similar to olive oil.

Functional redundancy ensures performance robustness in 3-stage PHA-producing mixed cultures under variable feed operation.

Science.gov (United States)

Carvalho, Gilda; Pedras, Inês; Karst, Soren M; Oliveira, Catarina S S; Duque, Anouk F; Nielsen, Per H; Reis, Maria A M

2018-01-25

Polyhydroxyalkanoates (PHA) are biopolymers that can be produced by mixed microbial cultures using wastes or industrial by-products, which represent an economical and environmental advantage over pure culture processes. The use of alternate feedstocks enables using seasonal by-products, providing that the process is resilient to transient conditions. The mixed microbial communities of a 3-stage PHA producing system fed initially with molasses and then cheese whey were investigated through amplicon sequencing of the 16S rRNA gene. The transition in feedstock resulted in an adaptation of the acidogenic community, where Actinobacteria dominated with sugarcane molasses (up to 93% of the operational taxonomic units) and Firmicutes, with cheese whey (up to 97%). The resulting fermentation products profile also changed, with a higher fraction of HV precursors obtained with molasses than cheese whey (7.1±0.5 and 1.7±0.7 gCOD/L, respectively). As for the PHA storing culture, the genera Azoarcus, Thauera and Paracoccus were enriched with fermented molasses (average 89% of Bacteria). Later, fermented cheese whey fostered a higher diversity, including some less characterised PHA-storers such as the genera Paenibacillus and Lysinibacillus. Although the microbial community structure was significantly affected by the feedstock shift, the acidogenic and PHA storing performance of the 3-stage system was very similar once a pseudo steady state was attained, showing that a reliable level of functional redundancy was attained in both mixed cultures. Copyright © 2017 Elsevier B.V. All rights reserved.

Enterocin B3A-B3B produced by LAB collected from infant faeces: potential utilization in the food industry for Listeria monocytogenes biofilm management.

Science.gov (United States)

Al-Seraih, Alaa; Belguesmia, Yanath; Baah, John; Szunerits, Sabine; Boukherroub, Rabah; Drider, Djamel

2017-02-01

Enterococcus faecalis B3A-B3B produces the bacteriocin B3A-B3B with activity against Listeria monocytogenes, Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA) and Clostridium perfringens, but apparently not against fungi or Gram-negative bacteria, except for Salmonella Newport. B3A-B3B enterocin has two different nucleotides but similar amino acid composition to the class IIb MR10A-MR10B enterocin. B3A-B3B consists of two peptides of predicted molecular mass of 5176.31 Da (B3A) and 5182.21 Da (B3B). Importantly, B3A-B3B impeded biofilm formation of the foodborne pathogen L. monocytogenes 162 grown on stainless steel. The antimicrobial treatment of stainless steel with nisin (1 or 16 mg ml -1 ) decreased the cell numbers by about 2 log CFU ml -1 , thereby impeding the biofilm formation by L. monocytogenes 162 or its nisin-resistant derivative strain L. monocytogenes 162R. Furthermore, the combination of nisin and B3A-B3B enterocin reduced the MIC required to inhibit this pathogen grown in planktonic or biofilm cultures.

Inhibition of human MCF-7 breast cancer cells and HT-29 colon cancer cells by rice-produced recombinant human insulin-like growth binding protein-3 (rhIGFBP-3.

Directory of Open Access Journals (Sweden)

Stanley C K Cheung

Full Text Available BACKGROUND: Insulin-like growth factor binding protein-3 (IGFBP-3 is a multifunctional molecule which is closely related to cell growth, apoptosis, angiogenesis, metabolism and senescence. It combines with insulin-like growth factor-I (IGF-I to form a complex (IGF-I/IGFBP-3 that can treat growth hormone insensitivity syndrome (GHIS and reduce insulin requirement in patients with diabetes. IGFBP-3 alone has been shown to have anti-proliferation effect on numerous cancer cells. METHODOLOGY/PRINCIPAL FINDINGS: We reported here an expression method to produce functional recombinant human IGFBP-3 (rhIGFBP-3 in transgenic rice grains. Protein sorting sequences, signal peptide and endoplasmic reticulum retention tetrapeptide (KDEL were included in constructs for enhancing rhIGFBP-3 expression. Western blot analysis showed that only the constructs with signal peptide were successfully expressed in transgenic rice grains. Both rhIGFBP-3 proteins, with or without KDEL sorting sequence inhibited the growth of MCF-7 human breast cancer cells (65.76 ± 1.72% vs 45.00 ± 0.86%, p < 0.05; 50.84 ± 1.97% vs 45.00 ± 0.86%, p < 0.01 respectively and HT-29 colon cancer cells (65.14 ± 3.84% vs 18.01 ± 13.81%, p < 0.05 and 54.7 ± 9.44% vs 18.01 ± 13.81%, p < 0.05 respectively when compared with wild type rice. CONCLUSION/SIGNIFICANCE: These findings demonstrated the feasibility of producing biological active rhIGFBP-3 in rice using a transgenic approach, which will definitely encourage more research on the therapeutic use of hIGFBP-3 in future.

Novel sol–gel methodology to produce LaCoO3 by acrylamide polymerization assisted by γ-irradiation

International Nuclear Information System (INIS)

Carabalí, G.; Chavira, E.; Castro, I.; Bucio, E.; Huerta, L.; Jiménez-Mier, J.

2012-01-01

In this paper we report the synthesis of LaCoO 3 (LCO) nano-particles with two methodologies: the conventional sol–gel reaction of acrylamide (AA) polymerization using a cross-linking agent (methylenebisacrylamide or MBA) with the activation of the polymerization reaction by thermo-chemical initiator (azobisisobutyrnitrile or AIBN). The second was a novel sol–gel methodology in which the polymerization of AA monomers was done without MBA and the initiation was achieved by gamma radiation. With thermochemical initiator a xerogel with a foam and porous structure was obtained, while the gamma-irradiation of the mixture leads to the formation of a compact resin with entrapped cations. X-ray diffraction (XRD) shows that formation of the product begins around 500 °C and according to analysis of microscopy images of powders calcined in 700 °C the average sizes of particles are 20 nm and 42 nm for samples obtained using γ-irradiation and AIBN as initiators, respectively. TEM images also show differences in particle morphology. Those synthesized using AIBN as initiator are dispersed, while those with γ-irradiation are in aggregates. - Highlights: ► LaCoO 3 nano-crystallites were synthesized by two different polyacrylamide sol–gel processes. ► Acrylamide polymerization reaction initiated by gamma irradiation and by thermo-chemical agent. ► Polymerization reaction with thermo-chemical initiator produces a porous gel. ► Xerogel obtained using gamma radiation is compact resin. ► LaCoO 3 powders produced by both methods differ in the size and morphology of particles.

A simple dissolved metals mixing method to produce high-purity MgTiO3 nanocrystals

International Nuclear Information System (INIS)

Pratapa, Suminar; Baqiya, Malik A.; Istianah,; Lestari, Rina; Angela, Riyan

2014-01-01

A simple dissolved metals mixing method has been effectively used to produce high-purity MgTiO 3 (MT) nanocrystals. The method involves the mixing of independently dissolved magnesium and titanium metal powders in hydrochloric acid followed by calcination. The phase purity and nanocrystallinity were determined by making use of laboratory x-ray diffraction data, to which Rietveld-based analyses were performed. Results showed that the method yielded only one type magnesium titanate powders, i.e. MgTiO 3 , with no Mg 2 TiO 4 or MgTi 2 O 5 phases. The presence of residual rutile or periclase was controlled by adding excessive Mg up to 5% (mol) in the stoichiometric mixing. The method also resulted in MT nanocrystals with estimated average crystallite size of 76±2 nm after calcination at 600°C and 150±4 nm (at 800°C). A transmission electron micrograph confirmed the formation of the nanocrystallites

Investigation of Wear Behavior of Aluminum Matrix Composite Reinforced by Al2O3 and Produced by Hot Pressing Process

Directory of Open Access Journals (Sweden)

Halil ARIK

2017-12-01

Full Text Available In this study, Al powder produced by gas atomization technique has 72.06 µm average particle size and 99 % purity was mixed with as a reinforcement Al2O3 has 99.52% purity and 45 submicron particle size in a high energy ball mill for two hours. In order to obtain disk samples with 30 mm diameter and 6 mm thick mixed powders, after the characterization of particle size and morphology, were compacted in a single action press. Compaction process were carried out from mixed powders by hot pressing at 200 MPa pressure and 550 °C temperature for two hours. Then microstructural analysis, hardness and density measurements of powder metal composite parts were performed. After, the characterization of samples abrasion wear tests were performed according to ASTM-G99-05 by using TRIBOMETER T10/20 ball-on-disk abrasive wearing device. After the abrasive wear test of aluminum and composite powder metal parts produced under the identical test parameters, test results were compared and effect of Al2O3 on the wear properties of composite materials was exhibited. The test results showed that the composite parts have 62 % extra harness and better abrasion wear performance according to aluminum powder metal parts produced and tested under the identical conditions

Ridge optical waveguide in an Er3+/Yb3+ co-doped phosphate glass produced by He+ ion implantation combined with Ar+ ion beam etching

International Nuclear Information System (INIS)

Tan Yang; Chen Feng; Hu Lili; Xing Pengfei; Chen Yanxue; Wang Xuelin; Wang Keming

2007-01-01

This paper reports on the fabrication and characterization of a ridge optical waveguide in an Er 3+ /Yb 3+ co-doped phosphate glass. The He + ion implantation (at energy of 2.8 MeV) is first applied onto the sample to produce a planar waveguide substrate, and then Ar + ion beam etching (at energy of 500 eV) is carried out to construct rib stripes on the sample surface that has been deposited by a specially designed photoresist mask. According to a reconstructed refractive index profile of the waveguide cross section, the modal distribution of the waveguide is simulated by applying a computer code based on the beam propagation method, which shows reasonable agreement with the experimentally observed waveguide mode by using the end-face coupling method. Simulation of the incident He ions at 2.8 MeV penetrating into the Er 3+ /Yb 3+ co-doped phosphate glass substrate is also performed to provide helpful information on waveguide formation

Production, characterization, and antifungal activity of a biosurfactant produced by Rhodotorula babjevae YS3.

Science.gov (United States)

Sen, Suparna; Borah, Siddhartha Narayan; Bora, Arijit; Deka, Suresh

2017-05-30

Sophorolipids are one of the most promising glycolipid biosurfactants and have been successfully employed in bioremediation and various other industrial sectors. They have also been described to exhibit antimicrobial activity against different bacterial species. Nevertheless, previous literature pertaining to the antifungal activity of sophorolipids are limited indicating the need for further research to explore novel strains with wide antimicrobial activity. A novel yeast strain, Rhodotorula babjevae YS3, was recently isolated from an agricultural field in Assam, Northeast India. This study was primarily emphasized at the characterization and subsequent evaluation of antifungal activity of the sophorolipid biosurfactant produced by R. babjevae YS3. The growth kinetics and biosurfactant production by R. babjevae YS3 was evaluated by cultivation in Bushnell-Haas medium containing glucose (10% w/v) as the sole carbon source. A reduction in the surface tension of the culture medium from 70 to 32.6 mN/m was observed after 24 h. The yield of crude biosurfactant was recorded to be 19.0 g/l which might further increase after optimization of the growth parameters. The biosurfactant was characterized to be a heterogeneous sophorolipid (SL) with both lactonic and acidic forms after TLC, FTIR and LC-MS analyses. The SL exhibited excellent oil spreading and emulsifying activity against crude oil at 38.46 mm 2 and 100% respectively. The CMC was observed to be 130 mg/l. The stability of the SL was evaluated over a wide range of pH (2-10), salinity (2-10% NaCl) and temperature (at 120 °C for time intervals of 30 up to 120 min). The SL was found to retain surface-active properties under the extreme conditions. Additionally, the SL exhibited promising antifungal activity against a considerably broad group of pathogenic fungi viz. Colletotrichum gloeosporioides, Fusarium verticilliodes, Fusarium oxysporum f. sp. pisi, Corynespora cassiicola, and Trichophyton rubrum. The

Progesterone Metabolites Produced by Cytochrome P450 3A Modulate Uterine Contractility in a Murine Model

Science.gov (United States)

Patil, Avinash S.; Swamy, Geeta K.; Murtha, Amy P.; Heine, R. Phillips; Zheng, Xiaomei; Grotegut, Chad A.

2015-01-01

Objective: We seek to characterize the effect of progesterone metabolites on spontaneous and oxytocin-induced uterine contractility. Study Design: Spontaneous contractility was studied in mouse uterine horns after treatment with progesterone, 2α-hydroxyprogesterone, 6β-hydroxyprogesterone (6β-OHP), 16α-hydroxyprogesterone (16α-OHP), or 17-hydroxyprogesterone caproate (17-OHPC) at 10−9 to 10−6 mol/L. Uterine horns were exposed to progestins (10−6 mol/L), followed by increasing concentrations of oxytocin (1-100 nmol/L) to study oxytocin-induced contractility. Contraction parameters were compared for each progestin and matched vehicle control using repeated measures 2-way analysis of variance. In vitro metabolism of progesterone by recombinant cytochrome P450 3A (CYP3A) microsomes (3A5, 3A5, and 3A7) identified major metabolites. Results: Oxytocin-induced contractile frequency was decreased by 16α-OHP (P = .03) and increased by 6β-OHP (P = .05). Progesterone and 17-OHPC decreased oxytocin-induced contractile force (P = .02 and P = .04, respectively) and frequency (P = .02 and P = .03, respectively). Only progesterone decreased spontaneous contractile force (P = .02). Production of 16α-OHP and 6β-OHP metabolites were confirmed in all CYP3A isoforms tested. Conclusion: Progesterone metabolites produced by maternal or fetal CYP3A enzymes influence uterine contractility. PMID:26037300

Characterization of Al–Al{sub 4}C{sub 3} nanocomposites produced by mechanical milling

Energy Technology Data Exchange (ETDEWEB)

Santos-Beltrán, A., E-mail: asantos@utchsur.edu.mx [Universidad Tecnológica de Chihuahua Sur, Carr. Chihuahua a Aldama km. 3 S/N, Col. Colinas del León, CP. 31313 Chihuahua, Chih. (Mexico); Goytia-Reyes, R. [Centro de Investigación en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnología, Miguel de Cervantes No. 120, C.P. 31109 Chihuahua, Chih. (Mexico); Morales-Rodriguez, H.; Gallegos-Orozco, V. [Universidad Tecnológica de Chihuahua Sur, Carr. Chihuahua a Aldama km. 3 S/N, Col. Colinas del León, CP. 31313 Chihuahua, Chih. (Mexico); Santos-Beltrán, M. [Centro de Investigación en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnología, Miguel de Cervantes No. 120, C.P. 31109 Chihuahua, Chih. (Mexico); Baldenebro-Lopez, F. [Universidad Tecnológica de Chihuahua Sur, Carr. Chihuahua a Aldama km. 3 S/N, Col. Colinas del León, CP. 31313 Chihuahua, Chih. (Mexico); Martínez-Sánchez, R. [Centro de Investigación en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnología, Miguel de Cervantes No. 120, C.P. 31109 Chihuahua, Chih. (Mexico)

2015-08-15

In this work, a mixture of Al–C–Al{sub 4}C{sub 3} nanopowder previously synthesized by mechanical milling and subsequent thermal treatment was used to reinforce the Al matrix. The nanocomposites were fabricated via high-energy ball milling and subsequent sintering process for different periods of time at 550 °C. Hardness and compression tests were performed to evaluate the mechanical properties of the nanocomposites in the as-milled and sintered conditions. According to the results the reinforcement located in the grain boundaries is responsible for the brittle behavior observed in the nanocomposites during the compression test. The combined effect of sintering and precipitation mechanisms produced an evident increase of the strength of the Al matrix at a relatively short sintering time. By using the Rietveld method the crystallite size and microstrain measurements were determined and correlated with the microhardness values. For the proper characterization of the nanoparticles present in the Al matrix, atomic force microscopy and high resolution electron microscopy were used. - Highlights: • Nanostructured Al{sub 4}C{sub 3} reinforcement was fabricated via mechanical milling and heat treatment. • We found a significant increase of the mechanical properties at short sintering times. • The formation of Al{sub 4}C{sub 3} with during sintering time restricted the excessive growth of the crystallite. • Al{sub 4}C{sub 3} located in the grain boundaries causes brittle fracture observed in compression tests. • There is a correlation between, crystallite size and microstrain values with microhardness.

Cells for bioartificial liver devices: the human hepatoma-derived cell line C3A produces urea but does not detoxify ammonia.

Science.gov (United States)

Mavri-Damelin, Demetra; Damelin, Leonard H; Eaton, Simon; Rees, Myrddin; Selden, Clare; Hodgson, Humphrey J F

2008-02-15

Extrahepatic bioartificial liver devices should provide an intact urea cycle to detoxify ammonia. The C3A cell line, a subclone of the hepatoma-derived HepG2 cell line, is currently used in this context as it produces urea, and this has been assumed to be reflective of ammonia detoxification via a functional urea cycle. However, based on our previous findings of perturbed urea-cycle function in the non-urea producing HepG2 cell line, we hypothesized that the urea produced by C3A cells was via a urea cycle-independent mechanism, namely, due to arginase II activity, and therefore would not detoxify ammonia. Urea was quantified using (15)N-ammonium chloride metabolic labelling with gas chromatography-mass spectrometry. Gene expression was determined by real-time reverse transcriptase-PCR, protein expression by western blotting, and functional activities with radiolabelling enzyme assays. Arginase inhibition studies used N(omega)-hydroxy-nor-L-arginine. Urea was detected in C3A conditioned medium; however, (15)N-ammonium chloride-labelling indicated that (15)N-ammonia was not incorporated into (15)N-labelled urea. Further, gene expression of two urea cycle genes, ornithine transcarbamylase and arginase I, were completely absent. In contrast, arginase II mRNA and protein was expressed at high levels in C3A cells and was inhibited by N(omega)-hydroxy-nor-L-arginine, which prevented urea production, thereby indicating a urea cycle-independent pathway. The urea cycle is non-functional in C3A cells, and their urea production is solely due to the presence of arginase II, which therefore cannot provide ammonia detoxification in a bioartificial liver system. This emphasizes the continued requirement for developing a component capable of a full repertoire of liver function. (c) 2007 Wiley Periodicals, Inc.

Quantum processes in a strong electromagnetic field producing pairs. 3

International Nuclear Information System (INIS)

Gitman, D.M.; Gavrilov, S.P.

1977-01-01

The Furry picture in quantum electrodynamics with an external field producing real pairs has been generalized. For the required generalization to be achieved all operators of a spinor field are expressed through functions of production and annihilation operators and formulated are the rules for reduction to a generalized normal form, i.e., to such a form in which all the production operators in each term are on the left from all the annihilation operators. The diagram technique for matrix elements of random processes has been considered

Volatile fatty acids influence on the structure of microbial communities producing PHAs

Directory of Open Access Journals (Sweden)

Slawomir Ciesielski

2014-06-01

Full Text Available Polyhydroxyalkanoates (PHAs can be produced by microorganisms and are a biodegradable alternative to fossil-fuel based plastics. Currently, the focus is on reducing production costs by exploring alternative substrates for PHAs production, and on producing copolymers which are less brittle than monomers. Accordingly, this study used a substrate consisting of wastewater from waste-glycerol fermentation, supplemented with different amounts of acetic and propionic acids. These substrates were used to feed mixed microbial communities enriched from activated sludge in a sequencing batch reactor. A reactor supplemented with 2 mL of acetic acid produced 227.8 mg/L of a homopolymer of hydroxybutyrate (3HB; 4 mL of acetic acid produced 279.8 mg/L 3HB; whereas 4 mL of propionic acid produced 673.0 mg/L of a copolymer of 3HB and 3HV (hydroxyvalerate. Ribosomal Intergenic Spacer Analysis (RISA was used to show the differences between the communities created in the reactors. Thauera species predominated in biomass that produced 3HB; Paracoccus denitrificans in the biomass that produced 3HB-co-3HV. Because P. denitrificans produced the more desirable copolymer, it may be advantageous to promote its growth in PHAs-producing reactors by adding propionate.

Indole-3-Acetic Acid-Producing Yeasts in the Phyllosphere of the Carnivorous Plant Drosera indica L

Science.gov (United States)

Shin, Li-Ying; Wei, Jyuan-Yu; Fu, Shih-Feng; Chou, Jui-Yu

2014-01-01

Yeasts are widely distributed in nature and exist in association with other microorganisms as normal inhabitants of soil, vegetation, and aqueous environments. In this study, 12 yeast strains were enriched and isolated from leaf samples of the carnivorous plant Drosera indica L., which is currently threatened because of restricted habitats and use in herbal industries. According to similarities in large subunit and small subunit ribosomal RNA gene sequences, we identified 2 yeast species in 2 genera of the phylum Ascomycota, and 5 yeast species in 5 genera of the phylum Basidiomycota. All of the isolated yeasts produced indole-3-acetic acid (IAA) when cultivated in YPD broth supplemented with 0.1% L-tryptophan. Growth conditions, such as the pH and temperature of the medium, influenced yeast IAA production. Our results also suggested the existence of a tryptophan-independent IAA biosynthetic pathway. We evaluated the effects of various concentrations of exogenous IAA on yeast growth and observed that IAA produced by wild yeasts modifies auxin-inducible gene expression in Arabidopsis. Our data suggest that yeasts can promote plant growth and support ongoing prospecting of yeast strains for inclusion into biofertilizer for sustainable agriculture. PMID:25464336

Microstructure and microhardness characterization of Cr{sub 3}C{sub 2}-SiC coatings produced by the plasma transferred arc method

Energy Technology Data Exchange (ETDEWEB)

Islak, Serkan [Kastamonu Univ. (Turkey). Cide Rifat Ilgaz Vocational High School; Eski, Oezkan [Kastamonu Univ. (Turkey). Kastamonu Vocational High School; Buytoz, Soner [Firat Univ., Elazig (Turkey). Dept. of Metallurgy and Materials Engineering; Karagoez, Muzaffer [Bartin Univ. (Turkey). Dept. of Metallurgical and Materials Engineering; Stokes, Joseph [Dublin City Univ. (Ireland). School of Mechanical and Manufacturing Engineering

2012-07-01

The purpose of this work was to investigate the coatings made of Cr{sub 3}C{sub 2} and SiC powder manufactured on AISI 304 stainless steel applied by the plasma transferred arc (PTA) welding process. SiC content in the produced coated layer was varied between 0-100 wt. % and the effect of SiC concentration on the microstructure and hardness of the coating was measured experimentally. SEM analyses revealed that the composite coatings had a homogeneous, nonporous, and crack-free microstructure. Dendrites and interdendrite eutectics formed on the coating layer, subject to the temperature gradient and the solidification ratio. There was a significant increase in the hardness of coating layers with the effect of the {gamma}-(Fe,Ni), Cr{sub 7}C{sub 3}, Cr{sub 23}C{sub 6}, Fe{sub 5}C{sub 2}, Cr{sub 3}Si, CrSi{sub 2}, Fe{sub 0.64}Ni{sub 0.36}, CFe{sub 15.1}, C-(Fe,Cr)-Si phases formed in the microstructure. In comparison to the substrate, the microhardness of the coatings produced by PTA were 2.5-3.5 times harder. (orig.)

DIAGNOSIS OF AQUACULTURE IN THE MUNICIPALITY OF ALVARADO VERACRUZ, MEXICO

Directory of Open Access Journals (Sweden)

Lenin Rangel-López

2014-07-01

Full Text Available This research aims to analyze the current situation of aquaculture farms in the Municipality of Alvarado, Veracruz, Mexico. During this study, 29 interviews were conducted aimed to the units of aquaculture producers; 24 variables were analyzed within the aspects of the socio-economic, technical, marketing and legal framework. The most relevant results within the legal framework: 21% of units has “National Registration of Fisheries and Aquaculture” (RNPyA and 7% has “Federal Taxpayer Register” (RFC; in the socio-economic aspects: 187 jobs are generated; on technical aspects: the average area for cultivation is 410.11 ha, 79% of production is Tilapia (Oreochromis spp.. The aquaculture activity on Alvarado, Veracruz, it is in a learning process, therefore strategies are needed in order to the development of the activity and increasing production; improving cultivation methodologies and training producers on managing their aquaculture units.

Artificial neural network-based exploration of gene-nutrient interactions in folate and xenobiotic metabolic pathways that modulate susceptibility to breast cancer.

Science.gov (United States)

Naushad, Shaik Mohammad; Ramaiah, M Janaki; Pavithrakumari, Manickam; Jayapriya, Jaganathan; Hussain, Tajamul; Alrokayan, Salman A; Gottumukkala, Suryanarayana Raju; Digumarti, Raghunadharao; Kutala, Vijay Kumar

2016-04-15

In the current study, an artificial neural network (ANN)-based breast cancer prediction model was developed from the data of folate and xenobiotic pathway genetic polymorphisms along with the nutritional and demographic variables to investigate how micronutrients modulate susceptibility to breast cancer. The developed ANN model explained 94.2% variability in breast cancer prediction. Fixed effect models of folate (400 μg/day) and B12 (6 μg/day) showed 33.3% and 11.3% risk reduction, respectively. Multifactor dimensionality reduction analysis showed the following interactions in responders to folate: RFC1 G80A × MTHFR C677T (primary), COMT H108L × CYP1A1 m2 (secondary), MTR A2756G (tertiary). The interactions among responders to B12 were RFC1G80A × cSHMT C1420T and CYP1A1 m2 × CYP1A1 m4. ANN simulations revealed that increased folate might restore ER and PR expression and reduce the promoter CpG island methylation of extra cellular superoxide dismutase and BRCA1. Dietary intake of folate appears to confer protection against breast cancer through its modulating effects on ER and PR expression and methylation of EC-SOD and BRCA1. Copyright © 2016 Elsevier B.V. All rights reserved.

Biological Art of Producing Useful Chemicals

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 21; Issue 3. Metabolic Engineering: Biological Art of Producing Useful Chemicals. Ram Kulkarni. General Article Volume 21 Issue 3 March 2016 pp 233-237. Fulltext. Click here to view fulltext PDF. Permanent link:

Probability of Detection (POD) Analysis for the Advanced Retirement for Cause (RFC)/Engine Structural Integrity Program (ENSIP) Nondestructive Evaluation (NDE) System-Volume 3: Material Correlation Study

National Research Council Canada - National Science Library

Berens, Alan

2000-01-01

.... Volume 1 presents a description of changes made to the probability of detection (POD) analysis program of Mil-STD-1823 and the statistical evaluation of modifications that were made to version 3 of the Eddy Current Inspection System (ECIS v3...

Producing x-rays

International Nuclear Information System (INIS)

Mallozzi, P.J.; Epstein, H.M.; Jung, R.G.; Applebaum, D.C.; Fairand, B.P.; Gallagher, W.J.

1977-01-01

A method of producing x-rays by directing radiant energy from a laser onto a target is described. Conversion efficiency of at least about 3 percent is obtained by providing the radiant energy in a low-power precursor pulse of approximately uniform effective intensity focused onto the surface of the target for about 1 to 30 nanoseconds so as to generate an expanding unconfined coronal plasma having less than normal solid density throughout and comprising a low-density (underdense) region wherein the plasma frequency is less than the laser radiation frequency and a higher-density (overdense) region wherein the plasma frequency is greater than the laser radiation frequency and, about 1 to 30 nanoseconds after the precursor pulse strikes the target, a higher-power main pulse focused onto the plasma for about 10 -3 to 30 nanoseconds and having such power density and total energy that the radiant energy is absorbed in the underdense region and conducted into the overdense region to heat it and thus to produce x-rays therefrom with the plasma remaining substantially below normal solid density and thus facilitating the substantial emission of x-rays in the form of spectral lines arising from nonequilibrium ionization states

3d-4p x-ray spectrum emitted by highly ionized uranium from a laser-produced plasma in the 3.8<λ<4.4-A wavelength range

International Nuclear Information System (INIS)

Mandelbaum, P.; Seely, J.F.; Kania, D.R.; Kauffman, R.L.

1992-01-01

This work extends a previous analysis of the x-ray spectrum of a laser-produced uranium plasma [P. Mandelbaum et al., Phys. Rev. A 44, 5752 (1991)] to the longer-wavelength range (3.8 +65 ) through As-like (U +59 ) isoelectronic sequences are identified in the spectrum, in good agreement with the previous analysis of the spectrum emitted at shorter wavelengths

Backward ejected electrons produced by 1-MeV/u Oq+ (q=3--8) projectile ions colliding with argon gas

International Nuclear Information System (INIS)

Breinig, M.; Berryman, J.W.; Segner, F.; Desai, D.D.

1994-01-01

The cross sections for ejecting electrons into a cone of half-angle ∼2 degree centered on the backward direction have been measured as a function of electron energy for 1-MeV/u O q+ (q=3--8) projectiles colliding with Ar. For O 3+ and O 4+ projectiles, the cross sections have also been measured in coincidence with exit charge states (q+1) and (q+2) of the projectile. A prominent feature in all spectra is a target LMM Auger peak. The cross sections for producing Ar LMM Auger electrons are nearly independent of projectile incident charge states. A projectile electron-loss peak is produced when the projectile brings loosely bound L-shell electrons into the collision. The shape of this peak is independent of the projectile exit charge state within experimental error. The measured electron-loss production cross sections at 180 degree are compared with the predictions of various on-shell approximations to the impulse approximation. Peak height and position are sensitive functions of the on-shell approximation used. The predictions of the elastic scattering model agree well with the data

Genetically engineered mesenchymal stromal cells produce IL-3 and TPO to further improve human scaffold-based xenograft models.

Science.gov (United States)

Carretta, Marco; de Boer, Bauke; Jaques, Jenny; Antonelli, Antonella; Horton, Sarah J; Yuan, Huipin; de Bruijn, Joost D; Groen, Richard W J; Vellenga, Edo; Schuringa, Jan Jacob

2017-07-01

Recently, NOD-SCID IL2Rγ -/- (NSG) mice were implanted with human mesenchymal stromal cells (MSCs) in the presence of ceramic scaffolds or Matrigel to mimic the human bone marrow (BM) microenvironment. This approach allowed the engraftment of leukemic samples that failed to engraft in NSG mice without humanized niches and resulted in a better preservation of leukemic stem cell self-renewal properties. To further improve our humanized niche scaffold model, we genetically engineered human MSCs to secrete human interleukin-3 (IL-3) and thrombopoietin (TPO). In vitro, these IL-3- and TPO-producing MSCs were superior in expanding human cord blood (CB) CD34 + hematopoietic stem/progenitor cells. MLL-AF9-transduced CB CD34 + cells could be transformed efficiently along myeloid or lymphoid lineages on IL-3- and TPO-producing MSCs. In vivo, these genetically engineered MSCs maintained their ability to differentiate into bone, adipocytes, and other stromal components. Upon transplantation of MLL-AF9-transduced CB CD34 + cells, acute myeloid leukemia (AML) and acute lymphoblastic leukemia (ALL) developed in engineered scaffolds, in which a significantly higher percentage of myeloid clones was observed in the mouse compartments compared with previous models. Engraftment of primary AML, B-cell ALL, and biphenotypic acute leukemia (BAL) patient samples was also evaluated, and all patient samples could engraft efficiently; the myeloid compartment of the BAL samples was better preserved in the human cytokine scaffold model. In conclusion, we show that we can genetically engineer the ectopic human BM microenvironment in a humanized scaffold xenograft model. This approach will be useful for functional study of the importance of niche factors in normal and malignant human hematopoiesis. Copyright © 2017 ISEH - International Society for Experimental Hematology. All rights reserved.

75 FR 64782 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Science.gov (United States)

2010-10-20

... Negros, Baja California Norte, Mexico; R.F.C. CDO-980604-4V7 (Mexico); (ENTITY) [SDNTK]. 4. MANTENIMIENTO.... FLCCAL64032609H300 (Mexico); (INDIVIDUAL) [SDNTK]. 2. GARCIA SANCHEZ, Ricardo, c/o MANTENIMIENTO, AERONAUTICA...

Solution Structure of Enterocin HF, an Antilisterial Bacteriocin Produced by Enterococcus faecium M3K31.

Science.gov (United States)

Arbulu, Sara; Lohans, Christopher T; van Belkum, Marco J; Cintas, Luis M; Herranz, Carmen; Vederas, John C; Hernández, Pablo E

2015-12-16

The solution structure of enterocin HF (EntHF), a class IIa bacteriocin of 43 amino acids produced by Enterococcus faecium M3K31, was evaluated by CD and NMR spectroscopy. Purified EntHF was unstructured in water, but CD analysis supports that EntHF adopts an α-helical conformation when exposed to increasing concentrations of trifluoroethanol. Furthermore, NMR spectroscopy indicates that this bacteriocin adopts an antiparallel β-sheet structure in the N-terminal region (residues 1-17), followed by a well-defined central α-helix (residues 19-30) and a more disordered C-terminal end (residues 31-43). EntHF could be structurally organized into three flexible regions that might act in a coordinated manner. This is in agreement with the absence of long-range nuclear Overhauser effect signals between the β-sheet domain and the C-terminal end of the bacteriocin. The 3D structure recorded for EntHF fits emerging facts regarding target recognition and mode of action of class IIa bacteriocins.

Bone marrow stromal cells spontaneously produce Flt3-ligand: influence of ionizing radiations and cytokine stimulation.

Science.gov (United States)

Bertho, Jean Marc; Demarquay, Christelle; Mouiseddine, Moubarak; Douenat, Noémie; Stefani, Johanna; Prat, Marie; Paquet, François

2008-08-01

To define the ability of human bone marrow (BM) stromal cells to produce fms-like tyrosine kinase 3 (Flt3)-ligand (FL), and the effect of irradiation, tumour necrosis factor-alpha (TNFalpha) or tumour growth factor beta (TGFbeta) on FL production. Primary BM stromal cell cultures were irradiated at 2-10 Gy or were stimulated with TNFalpha or TGFbeta1. The presence of FL was tested in culture supernatants and in cell lysate. The presence of a membrane-bound form of FL and the level of gene expression were also tested. Primary BM stromal cells spontaneously released FL. This production was increased by TNFalpha but not by TGFbeta1 or by irradiation. Chemical induction of osteoblastic differentiation from BM stromal cells also induced an increase in FL release. Our results suggest that the observed increase in FL concentration after in vivo irradiation is an indirect effect. The possible implication of BM stromal cells in these mechanisms is discussed.

Toward 3-D E-field visualization in laser-produced plasma by polarization-spectroscopic imaging

International Nuclear Information System (INIS)

Kim, Yong W.

2004-01-01

A 3-D volume radiator such as laser-produced plasma (LPP) plumes is observed in the form of a 2-D projection of its radiative structure. The traditional approach to 3-D structure reconstruction relies on multiple projections but is not suitable as a general method for unsteady radiating objects. We have developed a general method for 3-D structure reconstruction for LPP plumes in stages of increasing complexity. We have chosen neutral gas-confined LPP plumes from an aluminum target immersed in high-density argon because the plasma experiences Rayleigh-Taylor instability. We make use of two time-resolved, mutually orthogonal side views of a LPP plume and a front-view snapshot. No symmetry assumptions are needed. Two scaling relations are invoked that connects the plasma temperature and pressure to local specific intensity at selected wavelength(s). Two mutually-orthogonal lateral luminosity views of the plume at each known distance from the target surface are compared with those computed from the trial specific intensity profiles and the scaling relations. The luminosity error signals are minimized to find the structure. The front-view snapshot is used to select the initial trial profile and as a weighting function for allocation of the error signal into corrections for specific intensities from the plasma cells along the line of sight. Full Saha equilibrium for multiple stages of ionization is treated, together with the self-absorption, in the computation of the luminosity. We show the necessary optics for determination of local electric fields through polarization-resolved imaging. (author)

Isolation and molecular characterization of phytase producing ...

African Journals Online (AJOL)

Isolation and molecular characterization of phytase producing bacteria from Malaysia hot springs. ... The strains were further analyzed in broth culture using sodium phytate as substrate. Among them, strain L3 was selected as the best producer (0.16 U/ml after 72 h of culture). This phytase showed optimal activity at 37 °C ...

The management routes for materials produced by the dismantling of the BR3-PWR reactor

International Nuclear Information System (INIS)

Klein, M.; Demeulemeester, Y.; Ponnet, M.; Emond, M.; Emond, O.; Dadoumont, J.; Massaut, V.

2000-01-01

The dismantling of the BR3 reactor produces quite large masses of contaminated materials, mainly metals or concrete. The main management routes are: conditioning of the radioactive wastes and disposal, recycling of radioactive materials in the nuclear sector and the recycling of free released materials in the industrial sector or their evacuation as industrial waste. The conditioning of the radioactive wastes is essentially performed in the installations of Belgoprocess and must follow the specifications imposed by the national radwaste management agency ONDRAF/NIRAS. The conditioning of the pieces produced during the cutting of the reactor pressure vessel is given as example. The recycling of radioactive materials in the nuclear sector is possible for metals and for concrete. For metals, SCK.CEN has an agreement with a nuclear foundry which reuses these materials for the fabrication of shieldings. For concrete, an R and D programme is going on with the objective to demonstrate the possible reuse of baryte concrete as raw materials for the production of mortar used in the conditioning of radioactive wastes. The free release of radioactive materials and their reuse or evacuation as radioactive wastes requires the strict respect of procedures and the use of low level measurement techniques. Various decontamination techniques are used at SCK.CEN to reach this objective. For the metals, we use mainly simple washing, abrasive decontamination and hard chemical decontamination. For concrete, we use mainly scabbling or shaving techniques. (authors)

26 CFR 1.246-5 - Reduction of holding periods in certain situations.

Science.gov (United States)

2010-04-01

... prices, or foreign-currency exchange rates; and (ii) Changes in the fair market value of the stock are... short position on a publicly traded index through a regulated futures contract (RFC) that reflects the...

Interface behaviour of Al{sub 2}O{sub 3}/Ti joints produced by liquid state bonding

Energy Technology Data Exchange (ETDEWEB)

Lemus R, J.; Guevara L, A. O.; Zarate M, J., E-mail: jlruiz@umich.mx [Universidad Michoacana de San Nicolas de Hidalgo, Instituto de Investigaciones Metalurgicas, Ciudad Universitaria, Edificio U, 58060 Morelia, Michoacan (Mexico)

2014-08-15

The main objective of this work was to determine various aspects during brazing of Al{sub 2}O{sub 3} samples to commercially titanium alloy grade 4 with biocompatibility properties, using a Au-foil as joining element. Al{sub 2}O{sub 3} ceramic was previously produced by sintering of powder cylindrical shape at 1550 grades C for 120 minutes. Previously to joining experiments, the surface of Al{sub 2}O{sub 3} samples were coating, by chemical vapor depositions (CVD) process, with a Mo layer of 2 and 4 μm thick and then stacked together with the Ti samples. Joining experiments were carried out on Al{sub 2}O{sub 3}-Mo/Au/Ti combinations at temperature of 1100 grades C using different holding times under vacuum atmosphere. The experimental results show a successful joining Mo-Al{sub 2}O{sub 3} to Ti. Analysis by scanning electron microscopy (Sem) revealed that joining of Al{sub 2}O{sub 3} to metal occurred by the formation of a homogeneous diffusion zone with no interfacial cracking or porosity at the interface. Results by electron probe micro analysis (EPMA) of Al{sub 2}O{sub 3}-Mo/Au/Ti combinations revealed that Mo traveled inside the joining elements and remained as solid solutions, however during cooling process Mo had a tendency to stay as a precipitate phase and atomic distributions of elements show a concentration line of Mo inside the joining element Au. On the other hand, well interaction of Ti with Au form different phases; like Ti{sub 3}Au and Ti Au. (author)

Finite element simulation of HIP-process to produce 3d near net shape parts

International Nuclear Information System (INIS)

Zadeh, M.K.

1996-01-01

One of the major problems when producing powder metallurgy parts through hot isostatic pressing (HIP) is the non homogeneous shrinkage of HIP-capsule during the process. This leads to time and cost consuming machining of the HIP parts. In order to reduce the machining to a minimum, one can try to simulate the HIP-process by means of numerical methods. Hereby, the part distortion can be predicted, and hence a new HIP-capsule can be designed in such a way to prevent the distortion partly or even completely. In the following, a finite element method is used, on one hand, to simulate part shrinkage during HIP process; on the other hand a method is integrated in this simulation to optimize the HIP-capsule geometry. For the determination of material dependent parameters, a mixture of theoretical and experimental methods is used. Results of simulation are verified for a complex 3d HIP part out of TiAl6V4

Method of producing grouting mortar

Energy Technology Data Exchange (ETDEWEB)

Shelomov, I K; Alchina, S I; Dizer, E I; Gruzdeva, G A; Nikitinskii, V I; Sabirzyanov, A K

1980-10-07

A method of producing grouting mortar by mixing the cement with an aqueous salt solution is proposed. So as to increase the quality of the mortar through an acceleration of the time for hardening, the mixture is prepared in two stages, in the first of which 20-30% of the entire cement batch hardens, and in the second of which the remainder of the cement hardens; 1-3-% of an aqueous salt solution is used in quantities of 0.5/1 wt.-% of weight of the cement. The use of this method of producing grouting mortar helps to increase the flexural strength of the cement brick up to 50% after two days ageing by comparison with the strength of cement brick produced from grouting mortar by ordinary methods utilizing identical quantities of the initial components (cement, water, chloride).

Indole-3-Acetic Acid Is Produced by Emiliania huxleyi Coccolith-Bearing Cells and Triggers a Physiological Response in Bald Cells.

Science.gov (United States)

Labeeuw, Leen; Khey, Joleen; Bramucci, Anna R; Atwal, Harjot; de la Mata, A Paulina; Harynuk, James; Case, Rebecca J

2016-01-01

Indole-3-acetic acid (IAA) is an auxin produced by terrestrial plants which influences development through a variety of cellular mechanisms, such as altering cell orientation, organ development, fertility, and cell elongation. IAA is also produced by bacterial pathogens and symbionts of plants and algae, allowing them to manipulate growth and development of their host. They do so by either producing excess exogenous IAA or hijacking the IAA biosynthesis pathway of their host. The endogenous production of IAA by algae remains contentious. Using Emiliania huxleyi, a globally abundant marine haptophyte, we investigated the presence and potential role of IAA in algae. Homologs of genes involved in several tryptophan-dependent IAA biosynthesis pathways were identified in E. huxleyi. This suggests that this haptophyte can synthesize IAA using various precursors derived from tryptophan. Addition of L-tryptophan to E. huxleyi stimulated IAA production, which could be detected using Salkowski's reagent and GC × GC-TOFMS in the C cell type (coccolith bearing), but not in the N cell type (bald). Various concentrations of IAA were exogenously added to these two cell types to identify a physiological response in E. huxleyi. The N cell type, which did not produce IAA, was more sensitive to it, showing an increased variation in cell size, membrane permeability, and a corresponding increase in the photosynthetic potential quantum yield of Photosystem II (PSII). A roseobacter (bacteria commonly associated with E. huxleyi) Ruegeria sp. R11, previously shown to produce IAA, was co-cultured with E. huxleyi C and N cells. IAA could not be detected from these co-cultures, and even when stimulated by addition of L-tryptophan, they produced less IAA than axenic C type culture similarly induced. This suggests that IAA plays a novel role signaling between different E. huxleyi cell types, rather than between a bacteria and its algal host.

Bioethanol produced from Moringa oleifera seeds husk

Science.gov (United States)

Ali, E. N.; Kemat, S. Z.

2017-06-01

This paper presents the potential of bioethanol production from Moringa oleifera seeds husk which contains lignocellulosic through Simultaneous Saccharification and Fermentation (SSF) process by using Saccharomyces cerevisiae. This paper investigates the parameters which produce optimum bioethanol yield. The husk was hydrolyzed using NaOH and fermented using Saccharomyces cerevisiae yeast. Batch fermentation was performed with different yeast dosage of 1, 3, and 5 g/L, pH value was 4.5, 5.0 and 5.5, and fermentation time of 3, 6, 9 and 12 hours. The temperature of fermentation process in incubator shaker is kept constant at 32ºC. The samples are then filtered using a 0.20 μm nylon filter syringe. The yield of bioethanol produced was analysed using High Performance Liquid Chromatography (HPLC). The results showed that the highest yield of 29.69 g/L was obtained at 3 hours of fermentation time at pH of 4.5 and using 1g/L yeast. This research work showed that Moringa oleifera seeds husk can be considered to produce bioethanol.

Eckmaxol, a Phlorotannin Extracted from Ecklonia maxima, Produces Anti-β-amyloid Oligomer Neuroprotective Effects Possibly via Directly Acting on Glycogen Synthase Kinase 3β.

Science.gov (United States)

Wang, Jialing; Zheng, Jiachen; Huang, Chunhui; Zhao, Jiaying; Lin, Jiajia; Zhou, Xuezhen; Naman, C Benjamin; Wang, Ning; Gerwick, William H; Wang, Qinwen; Yan, Xiaojun; Cui, Wei; He, Shan

2018-04-10

Alzheimer's disease is a progressive neurodegenerative disorder that mainly affects the elderly. Soluble β-amyloid oligomer, which can induce neurotoxicity, is generally regarded as the main neurotoxin in Alzheimer's disease. Here we report that eckmaxol, a phlorotannin extracted from the brown alga Ecklonia maxima, could produce neuroprotective effects in SH-SY5Y cells. Eckmaxol effectively prevented but did not rescue β-amyloid oligomer-induced neuronal apoptosis and increase of intracellular reactive oxygen species. Eckmaxol also significantly reversed the decreased expression of phospho-Ser9-glycogen synthase kinase 3β and increased expression of phospho-extracellular signal-regulated kinase, which was induced by Aβ oligomer. Moreover, both glycogen synthase kinase 3β and mitogen activated protein kinase inhibitors produced neuroprotective effects in SH-SY5Y cells. Furthermore, eckmaxol showed favorable interaction in the ATP binding site of glycogen synthase kinase 3β and mitogen activated protein kinase. These results suggested that eckmaxol might produce neuroprotective effects via concurrent inhibition of glycogen synthase kinase 3β and extracellular signal-regulated kinase pathways, possibly via directly acting on glycogen synthase kinase 3β and mitogen activated protein kinase. Based on the central role that β-amyloid oligomers play in the pathogenesis of Alzheimer's disease and the high annual production of Ecklonia maxima for alginate and other nutritional ingredients, this report represents a new candidate for the treatment of Alzheimer's disease, and also expands the potential application of Ecklonia maxima and its constituents in the field of pharmacology.

Evaluating the soil physical quality under long-term field experiments in Southern Italy

Science.gov (United States)

Castellini, Mirko; Stellacci, Anna Maria; Iovino, Massimo; Rinaldi, Michele; Ventrella, Domenico

2017-04-01

Long-term field experiments performed in experimental farms are important research tools to assess the soil physical quality (SPQ) given that relatively stable conditions can be expected in these soils. However, different SPQ indicators may sometimes provide redundant or conflicting results, making difficult an SPQ evaluation (Castellini et al., 2014). As a consequence, it is necessary to apply appropriate statistical procedures to obtain a minimum set of key indicators. The study was carried out at the Experimental Farm of CREA-SCA (Foggia) in two long-term field experiments performed on durum wheat. The first long-term experiment is aiming at evaluating the effects of two residue management systems (burning, B or soil incorporation of crop residues, I) while the second at comparing the effect of tillage (conventional tillage, CT) and sod-seeding (direct drilling, DD). In order to take into account both optimal and non-optimal soil conditions, five SPQ indicators were monitored at 5-6 sampling dates during the crop season (i.e., between November and June): soil bulk density (BD), macroporosity (PMAC), air capacity (AC), plant available water capacity (PAWC) and relative field capacity (RFC). Two additional data sets, collected on DD plot in different cropping seasons and in Sicilian soils differing for texture, depth and land use (N=140), were also used with the aim to check the correlation among indicators. Impact of soil management was assessed by comparing SPQ evaluated under different management systems with optimal reference values reported in literature. Two techniques of multivariate analysis (principal component analysis, PCA and stepwise discriminant analysis, SDA) were applied to select the most suitable indicator to facilitate the judgment on SPQ. Regardless of the considered management system, sampling date or auxiliary data set, correlation matrices always showed significant negative relationships between RFC and AC. Decreasing RFC at increasing AC is

Thermal System Modeling for Lunar and Martian Surface Regenerative Fuel Cell Systems

Science.gov (United States)

Gilligan, Ryan Patrick; Smith, Phillip James; Jakupca, Ian Joseph; Bennett, William Raymond; Guzik, Monica Christine; Fincannon, Homer J.

2017-01-01

The Advanced Exploration Systems (AES) Advanced Modular Power Systems (AMPS) Project is investigating different power systems for various lunar and Martian mission concepts. The AMPS Fuel Cell (FC) team has created two system-level models to evaluate the performance of regenerative fuel cell (RFC) systems employing different fuel cell chemistries. Proton Exchange Membrane fuel cells PEMFCs contain a polymer electrolyte membrane that separates the hydrogen and oxygen cavities and conducts hydrogen cations (protons) across the cell. Solid Oxide fuel cells (SOFCs) operate at high temperatures, using a zirconia-based solid ceramic electrolyte to conduct oxygen anions across the cell. The purpose of the modeling effort is to down select one fuel cell chemistry for a more detailed design effort. Figures of merit include the system mass, volume, round trip efficiency, and electrolyzer charge power required. PEMFCs operate at around 60 degrees Celsius versus SOFCs which operate at temperatures greater than 700 degrees Celsius. Due to the drastically different operating temperatures of the two chemistries the thermal control systems (TCS) differ. The PEM TCS is less complex and is characterized by a single pump cooling loop that uses deionized water coolant and rejects heat generated by the system to the environment via a radiator. The solid oxide TCS has its own unique challenges including the requirement to reject high quality heat and to condense the steam produced in the reaction. This paper discusses the modeling of thermal control systems for an extraterrestrial RFC that utilizes either a PEM or solid oxide fuel cell.

Thermal Design for Extra-Terrestrial Regenerative Fuel Cell System

Science.gov (United States)

Gilligan, R.; Guzik, M.; Jakupca, I.; Bennett, W.; Smith, P.; Fincannon, J.

2017-01-01

The Advanced Exploration Systems (AES) Advanced Modular Power Systems (AMPS) Project is investigating different power systems for various lunar and Martian mission concepts. The AMPS Fuel Cell (FC) team has created two system-level models to evaluate the performance of regenerative fuel cell (RFC) systems employing different fuel cell chemistries. Proton Exchange Membrane fuel cells PEMFCs contain a polymer electrolyte membrane that separates the hydrogen and oxygen cavities and conducts hydrogen cations (protons) across the cell. Solid Oxide fuel cells (SOFCs) operate at high temperatures, using a zirconia-based solid ceramic electrolyte to conduct oxygen anions across the cell. The purpose of the modeling effort is to down select one fuel cell chemistry for a more detailed design effort. Figures of merit include the system mass, volume, round trip efficiency, and electrolyzer charge power required. PEMFCs operate at around 60 C versus SOFCs which operate at temperatures greater than 700 C. Due to the drastically different operating temperatures of the two chemistries the thermal control systems (TCS) differ. The PEM TCS is less complex and is characterized by a single pump cooling loop that uses deionized water coolant and rejects heat generated by the system to the environment via a radiator. The solid oxide TCS has its own unique challenges including the requirement to reject high quality heat and to condense the steam produced in the reaction. This paper discusses the modeling of thermal control systems for an extraterrestrial RFC that utilizes either a PEM or solid oxide fuel cell.

Characterization of Oilseed Lipids from “DHA-Producing Camelina sativa”: A New Transformed Land Plant Containing Long-Chain Omega-3 Oils

Directory of Open Access Journals (Sweden)

Maged P. Mansour

2014-02-01

Full Text Available New and sustainable sources of long-chain (LC, ≥C20 omega-3 oils containing DHA (docosahexaenoic acid, 22:6ω3 are required to meet increasing demands. The lipid content of the oilseed of a novel transgenic, DHA-producing land plant, Camelina sativa, containing microalgal genes able to produce LC omega-3 oils, contained 36% lipid by weight with triacylglycerols (TAG as the major lipid class in hexane extracts (96% of total lipid. Subsequent chloroform-methanol (CM extraction recovered further lipid (~50% polar lipid, comprising glycolipids and phospholipids and residual TAG. The main phospholipid species were phosphatidyl choline and phosphatidyl ethanolamine. The % DHA was: 6.8% (of total fatty acids in the TAG-rich hexane extract and 4.2% in the polar lipid-rich CM extract. The relative level of ALA (α-linolenic acid, 18:3ω3 in DHA-camelina seed was higher than the control. Major sterols in both DHA- and control camelina seeds were: sitosterol, campesterol, cholesterol, brassicasterol and isofucosterol. C16–C22 fatty alcohols, including iso-branched and odd-chain alcohols were present, including high levels of iso-17:0, 17:0 and 19:0. Other alcohols present were: 16:0, iso-18:0, 18:0 and 18:1 and the proportions varied between the hexane and CM extracts. These iso-branched odd-chain fatty alcohols, to our knowledge, have not been previously reported. These components may be derived from wax esters, or free fatty alcohols.

NM WAIDS: A PRODUCED WATER QUALITY AND INFRASTRUCTURE GIS DATABASE FOR NEW MEXICO OIL PRODUCERS

Energy Technology Data Exchange (ETDEWEB)

Martha Cather; Robert Lee; Ibrahim Gundiler; Andrew Sung

2003-09-24

The New Mexico Water and Infrastructure Data System (NM WAIDS) seeks to alleviate a number of produced water-related issues in southeast New Mexico. The project calls for the design and implementation of a Geographical Information System (GIS) and integral tools that will provide operators and regulators with necessary data and useful information to help them make management and regulatory decisions. The major components of this system are: (1) Databases on produced water quality, cultural and groundwater data, oil pipeline and infrastructure data, and corrosion information. (2) A web site capable of displaying produced water and infrastructure data in a GIS or accessing some of the data by text-based queries. (3) A fuzzy logic-based, site risk assessment tool that can be used to assess the seriousness of a spill of produced water. (4) A corrosion management toolkit that will provide operators with data and information on produced waters that will aid them in deciding how to address corrosion issues. The various parts of NM WAIDS will be integrated into a website with a user-friendly interface that will provide access to previously difficult-to-obtain data and information. Primary attention during the first six months of this project was focused on creating the water quality databases for produced water and surface water, along with collecting of corrosion information and building parts of the corrosion toolkit. Work on the project to date includes: (1) Creation of a water quality database for produced water analyses. The database was compiled from a variety of sources and currently has over 7000 entries for New Mexico. (2) Creation of a web-based data entry system for the water quality database. This system allows a user to view, enter, or edit data from a web page rather than having to directly access the database. (3) Creation of a semi-automated data capturing system for use with standard water quality analysis forms. This system improves the accuracy and speed

Defect inspection in hot slab surface: multi-source CCD imaging based fuzzy-rough sets method

Science.gov (United States)

Zhao, Liming; Zhang, Yi; Xu, Xiaodong; Xiao, Hong; Huang, Chao

2016-09-01

To provide an accurate surface defects inspection method and make the automation of robust image region of interests(ROI) delineation strategy a reality in production line, a multi-source CCD imaging based fuzzy-rough sets method is proposed for hot slab surface quality assessment. The applicability of the presented method and the devised system are mainly tied to the surface quality inspection for strip, billet and slab surface etcetera. In this work we take into account the complementary advantages in two common machine vision (MV) systems(line array CCD traditional scanning imaging (LS-imaging) and area array CCD laser three-dimensional (3D) scanning imaging (AL-imaging)), and through establishing the model of fuzzy-rough sets in the detection system the seeds for relative fuzzy connectedness(RFC) delineation for ROI can placed adaptively, which introduces the upper and lower approximation sets for RIO definition, and by which the boundary region can be delineated by RFC region competitive classification mechanism. For the first time, a Multi-source CCD imaging based fuzzy-rough sets strategy is attempted for CC-slab surface defects inspection that allows an automatic way of AI algorithms and powerful ROI delineation strategies to be applied to the MV inspection field.

3-Dimensional Microorifice Fabricated Utilizing Single Undercut Etching Process for Producing Ultrasmall Water and Chitosan Droplets

Directory of Open Access Journals (Sweden)

Che-Hsin Lin

2013-01-01

Full Text Available This research reports a microfluidic device for producing small droplets via a microorifice and a T-junction structure. The orifice is fabricated using an isotropic undercut etching process of amorphous glass materials. Since the equivalent hydraulic diameter of the produced microorifice can be as small as 1.1 μm, the microdevice can easily produce droplets of the size smaller than 10 μm in diameter. In addition, a permanent hydrophobic coating technique is also applied to modify the main channel to be hydrophobic to enhance the formation of water-based droplets. Experimental results show that the developed microfluidic chip with the ultrasmall orifice can steadily produce water-in-oil droplets with different sizes. Uniform water-in-oil droplets with the size from 60 μm to 6.5 μm in diameter can be formed by adjusting the flow rate ratio of the continuous phase and the disperse phases from 1 to 7. Moreover, curable linear polymer of chitosan droplets with the size smaller than 100 μm can also be successfully produced using the developed microchip device. The microfluidic T-junction with a micro-orifice developed in the present study provides a simple yet efficient way to produce various droplets of different sizes.

Prime Time Power: Women Producers, Writers and Directors on TV.

Science.gov (United States)

Steenland, Sally

This report analyzes the number of women working in the following six decision making jobs in prime time television: (1) executive producer; (2) supervising producer; (3) producer; (4) co-producer; (5) writer; and (6) director. The women who hold these positions are able to influence the portrayal of women on television as well as to improve the…

Phenotypic and genomic analysis of serotype 3 Sabin poliovirus vaccine produced in MRC-5 cell substrate.

Science.gov (United States)

Alirezaie, Behnam; Taqavian, Mohammad; Aghaiypour, Khosrow; Esna-Ashari, Fatemeh; Shafyi, Abbas

2011-05-01

The cell substrate has a pivotal role in live virus vaccines production. It is necessary to evaluate the effects of the cell substrate on the properties of the propagated viruses, especially in the case of viruses which are unstable genetically such as polioviruses, by monitoring the molecular and phenotypical characteristics of harvested viruses. To investigate the presence/absence of mutation(s), the near full-length genomic sequence of different harvests of the type 3 Sabin strain of poliovirus propagated in MRC-5 cells were determined. The sequences were compared with genomic sequences of different virus seeds, vaccines, and OPV-like isolates. Nearly complete genomic sequencing results, however, revealed no detectable mutations throughout the genome RNA-plaque purified (RSO)-derived monopool of type 3 OPVs manufactured in MRC-5. Thirty-six years of experience in OPV production, trend analysis, and vaccine surveillance also suggest that: (i) different monopools of serotype 3 OPV produced in MRC-5 retained their phenotypic characteristics (temperature sensitivity and neuroattenuation), (ii) MRC-5 cells support the production of acceptable virus yields, (iii) OPV replicated in the MRC-5 cell substrate is a highly efficient and safe vaccine. These results confirm previous reports that MRC-5 is a desirable cell substrate for the production of OPV. Copyright © 2011 Wiley-Liss, Inc.

78 FR 39493 - Patient Protection and Affordable Care Act; Exchange Functions: Eligibility for Exemptions...

Science.gov (United States)

2013-07-01

... for recognition are neither group health insurance coverage nor individual health insurance. Consumers... RFC yielded comment submissions from consumer advocacy organizations, medical and health care... representatives, health insurance issuers, trade groups, consumer advocates, employers, and other interested...

Assessing the aromatic potential of Cabernet Sauvignon and Merlot musts used to produce rose wine by assaying the cysteinylated precursor of 3-mercaptohexan-1-ol.

Science.gov (United States)

Murat, M L; Tominaga, T; Dubourdieu, D

2001-11-01

The development of a method for assaying S-3-(hexan-1-ol)-L-cysteine, the cysteinylated precursor of 3-mercaptohexan-1-ol (P-3MH), in must has made it possible to study its impact on the aromatic potential of Merlot and Cabernet Sauvignon grape varieties used to produce rose wines in Bordeaux. The original feature of this method is the purification of very small volumes of must (500 microL) containing P-3MH by affinity chromatography and gas-phase chromatography coupled with mass spectrometry of the purified precursor in trimethylsilylated derivative form. Assays of the cysteinylated precursor in Merlot and Cabernet Sauvignon grapes showed that it was mainly located in the grape skins (60%). Prolonged juice-skin contact increased the must's P-3MH content, and this phenomenon was more marked at higher temperatures. Assessment of the aromatic potential of must used to produce rose wines by chemical analysis of an S-cysteine conjugate is mentioned for the first time.

Producing and marketing a specialty egg.

Science.gov (United States)

Michella, S M; Slaugh, B T

2000-07-01

Eggland's Best, Inc. markets premium quality shell eggs under the Eggland's Best (EB) brand name. The company, started in 1988, is comprised of a franchise network of established egg producers and covers most of the United States. Eggland's Best provides its franchisees with marketing and technical support. The franchisees produce, process, and distribute EB eggs according to the strict program established and monitored by EB. Production follows the all-natural vegetarian feed program in accordance with the company's US patent entitled "Eggs Compatible with a Cholesterol Reducing Diet and Method of Producing the Same." The EB program excludes animal fat and other animal byproducts. Eggland's Best eggs have seven times the generic level of vitamin E, nearly three times more omega-3 fatty acids and iodine, and 25% less saturated fat than regular generic eggs. Eggland's Best has one of the finest shell egg quality assurance programs anywhere. Eggland's Best franchisees submit weekly egg samples that are analyzed for shell quality, interior quality, vitamin E, iodine, cholesterol and fatty acids. Samples of feed and the EB-patented feed supplement are also analyzed. Approximately 28,000 total laboratory tests are conducted annually. Nationwide product and display retail evaluations are contracted through an outside audit company (40 to 50 cities evaluated four times per year). All EB eggs are USDA graded according to EB's strict quality standards. Producers must follow a food safety quality assurance program (United Egg Producers Association 5-Star or equivalent state or company program). Each egg is stamped "EB" as assurance of meeting EB's highest standards of flavor, quality, and nutrition. Eggland's Best has enjoyed record sales growth for the past 3 yr.

Luminescence in undoped CaYAl{sub 3}O{sub 7} produced via the Pechini method

Energy Technology Data Exchange (ETDEWEB)

Bispo, Giordano F.C., E-mail: gfredericoc@gmail.com [Physics Department, Federal University of Sergipe, 49100-000 São Cristovão, SE (Brazil); Andrade, Adriano B.; S Bezerra, Claudiane dos [Physics Department, Federal University of Sergipe, 49100-000 São Cristovão, SE (Brazil); Teixeira, Verônica C.; Galante, Douglas [Brazilian Synchrotron Light Laboratory, Brazilian Center for Research in Energy and Materials, 13083-970 Campinas, SP (Brazil); Valerio, Mário E.G. [Physics Department, Federal University of Sergipe, 49100-000 São Cristovão, SE (Brazil)

2017-02-15

The luminescent properties of CaYAl{sub 3}O{sub 7} (CYAM) were carried out in undoped powder samples produced via Pechini method. The thermal analysis combined with XRD measurements showed that 1000 °C/4 h is the best condition for the CYAM synthesis. Morphological analysis showed submicrometric particles with irregular shape. Photoluminescence (PL) emission and excitation spectra were studied with excitation in the ultraviolet and vacuum ultraviolet spectral region using synchrotron radiation. The CYAM band gap energy was measured and found to be around 6.8 eV. Low intense emission band around 4.4 eV, upon excitation at 6.5 eV, was assigned to the self-trapped excitons (STE) that are generated during the VUV excitation. Three main emission bands peaking at 2.57, 2.94 and 3.23 eV are responsible for most of the PL emission and radioluminescence (RL) emission in CYAM. Time-resolved measurements under pulsed 4.7 eV light showed that the PL decay curve is composed by 3 main processes with very short lifetime, smaller than 30 ns, and a small amount of long time constant process. Time-resolved RL measurements exciting with 4056 eV photons, above the Ca K edge, showed that the decay curve is composed by two processes with time constants around 27 and 130 ns and a small component due to a long decay constant bigger. All this features allowed the identification of the main emissions centres at 2.94 and 3.23 eV to the F{sup +} centres, while the emission centre at 2.57 eV is due to the F type centre.

Impact of fat reduction on flavor and flavor chemistry of Cheddar cheeses.

Science.gov (United States)

Drake, M A; Miracle, R E; McMahon, D J

2010-11-01

A current industry goal is to produce a 75 to 80% fat-reduced Cheddar cheese that is tasty and appealing to consumers. Despite previous studies on reduced-fat cheese, information is critically lacking in understanding the flavor and flavor chemistry of reduced-fat and nonfat Cheddar cheeses and how it differs from its full-fat counterpart. The objective of this study was to document and compare flavor development in cheeses with different fat contents so as to quantitatively characterize how flavor and flavor development in Cheddar cheese are altered with fat reduction. Cheddar cheeses with 50% reduced-fat cheese (RFC) and low-fat cheese containing 6% fat (LFC) along with 2 full-fat cheeses (FFC) were manufactured in duplicate. Cheeses were ripened at 8°C and samples were taken following 2 wk and 3, 6, and 9 mo for sensory and instrumental volatile analyses. A trained sensory panel (n=10 panelists) documented flavor attributes of cheeses. Volatile compounds were extracted by solid-phase microextraction or solvent-assisted flavor evaporation followed by separation and identification using gas chromatography-mass spectrometry and gas chromatography-olfactometry. Selected compounds were quantified using external standard curves. Sensory properties of cheeses were distinct initially but more differences were documented as cheeses aged. By 9 mo, LFC and RFC displayed distinct burnt/rosy flavors that were not present in FFC. Sulfur flavor was also lower in LFC compared with other cheeses. Forty aroma-active compounds were characterized in the cheeses by headspace or solvent extraction followed by gas chromatography-olfactometry. Compounds were largely not distinct between the cheeses at each time point, but concentration differences were evident. Higher concentrations of furanones (furaneol, homofuraneol, sotolon), phenylethanal, 1-octen-3-one, and free fatty acids, and lower concentrations of lactones were present in LFC compared with FFC after 9 mo of ripening. These

Dissemination of NDM-1-Producing Enterobacteriaceae Mediated by the IncX3-Type Plasmid

Science.gov (United States)

Fu, Ying; Du, Xiaoxing; Shen, Yuqin; Yu, Yunsong

2015-01-01

The emergence and spread of NDM-1-producing Enterobacteriaceae have resulted in a worldwide public health risk that has affected some provinces of China. China is an exceptionally large country, and there is a crucial need to investigate the epidemic of bla NDM-1-positive Enterobacteriaceae in our province. A total of 186 carbapenem-resistant Enterobacteriaceae isolates (CRE) were collected in a grade-3 hospital in Zhejiang province. Carbapenem-resistant genes, including bla KPC, bla IMP, bla VIM, bla OXA-48 and bla NDM-1 were screened and sequenced. Ninety isolates were identified as harboring the bla KPC-2 genes, and five bla NDM-1-positive isolates were uncovered. XbaI-PFGE revealed that three bla NDM-1-positive K. pneumoniae isolates belonged to two different clones. S1-PFGE and southern blot suggested that the bla NDM-1 genes were located on IncX3-type plasmids with two different sizes ranging from 33.3 to 54.7 kb (n=4) and 104.5 to 138.9 kb (n=1), respectively, all of which could easily transfer to Escherichia coli by conjugation and electrotransformation. The high-throughput sequencing of two plasmids was performed leading to the identification of a smaller 54-kb plasmid, which had high sequence similarity with a previously reported pCFNDM-CN, and a larger plasmid in which only a 7.8-kb sequence of a common gene environment around bla NDM-1 (bla NDM-1-trpF- dsbC-cutA1-groEL-ΔInsE,) was detected. PCR mapping and sequencing demonstrated that four smaller bla NDM-1 plasmids contained a common gene environment around bla NDM-1 (IS5-bla NDM-1-trpF- dsbC-cutA1-groEL). We monitored the CRE epidemic in our hospital and determined that KPC-2 carbapenemase was a major risk to patient health and the IncX3-type plasmid played a vital role in the spread of the bla NDM-1 gene among the CRE. PMID:26047502

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity.

Science.gov (United States)

Kang, Hyun-Wook; Lee, Sang Jin; Ko, In Kap; Kengla, Carlos; Yoo, James J; Atala, Anthony

2016-03-01

A challenge for tissue engineering is producing three-dimensional (3D), vascularized cellular constructs of clinically relevant size, shape and structural integrity. We present an integrated tissue-organ printer (ITOP) that can fabricate stable, human-scale tissue constructs of any shape. Mechanical stability is achieved by printing cell-laden hydrogels together with biodegradable polymers in integrated patterns and anchored on sacrificial hydrogels. The correct shape of the tissue construct is achieved by representing clinical imaging data as a computer model of the anatomical defect and translating the model into a program that controls the motions of the printer nozzles, which dispense cells to discrete locations. The incorporation of microchannels into the tissue constructs facilitates diffusion of nutrients to printed cells, thereby overcoming the diffusion limit of 100-200 μm for cell survival in engineered tissues. We demonstrate capabilities of the ITOP by fabricating mandible and calvarial bone, cartilage and skeletal muscle. Future development of the ITOP is being directed to the production of tissues for human applications and to the building of more complex tissues and solid organs.

Personal exposures to VOC in the upper end of the distribution—relationships to indoor, outdoor and workplace concentrations

Science.gov (United States)

Edwards, Rufus D.; Schweizer, Christian; Jantunen, Matti; Lai, Hak Kan; Bayer-Oglesby, Lucy; Katsouyanni, Klea; Nieuwenhuijsen, Mark; Saarela, Kristiina; Sram, Radim; Künzli, Nino

Evaluation of relationships between median residential indoor, indoor workplace and population exposures may obscure potential strategies for exposure reduction. Evaluation of participants with personal exposures above median levels in the EXPOLIS study in Athens, Helsinki, Oxford and Prague illustrated that these participants frequently showed a different relationship to indoor and workplace levels than that shown by the population median. Thus, prioritization of environments for control measures based on median exposures may exclude important areas where effectively focused control measures are possible, and may therefore have little impact on the highest and most harmful exposures. Further, personal exposures at the upper end of the distribution may exceed the US EPA inhalation reference concentration (Rfc), illustrated here using hexane, naphthalene and benzene. For example upper 90th percentile personal exposures to benzene in Athens and Prague were 64 and 27 μg m -3 with peak exposures of 217 and 38 μg m -3, respectively for non-ETS exposed participants relative to an Rfc of 30 μg m -3. Strategies to reduce exposures to individual compounds, therefore, may benefit from focus on the high end of the distribution to identify activities and behaviors that result in elevated exposures. Control strategies targeting activities that lead to exposures in the upper end of the distribution would reduce the variability associated with population median values by bringing the upper end of the exposure distribution closer to median values. Thus, compliance with health-based standards would be more protective of the higher exposed fraction of the population, in whom health effects would be more expected.

A fed-batch strategy to produce high poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) terpolymer yield with enhanced mechanical properties in bioreactor.

Science.gov (United States)

Aziz, Nursolehah Abd; Huong, Kai-Hee; Sipaut, Coswald Stephen; Amirul, A A

2017-11-01

This study reports an efficient fed-batch strategy to improve poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-3HV-co-4HB)] terpolymer production by Cupriavidus sp. USMAA2-4 with enhanced mechanical properties in bioreactor. The cultivations have been performed by combining oleic acid with γ-butyrolactone at different concentration ratios with 1-pentanol at a fixed concentration. The batch and fed-batch fermentations have resulted in P(3HB-co-3HV-co-4HB) with compositions of 9-35 mol% 3HV and 4-24 mol% 4HB monomers. The DO-stat fed-batch fermentation strategies have significantly improved the production with a maximum 4.4-fold increment of cell dry weight (CDW). Besides, appropriate feeding of the substrates has resulted in an increment of terpolymer productivity from 0.086-0.347 g/L/h, with a significantly shortened cultivation time. The bacterial growth and terpolymer formation have been found to be affected by the concentration of carbon sources supplied. Characterization of P(3HB-co-3HV-co-4HB) has demonstrated that incorporation of 3HV and 4HB monomer has significantly improved the physical and thermodynamic properties of the polymers, by reducing the polymer's crystallinity. The tensile strength, Young's modulus of the terpolymer has been discovered to increase with the increase of M w . The fed-batch fermentation strategies employed in this study have resulted in terpolymers with a range of flexible materials having improved tensile strength and Young's modulus as compared to the terpolymer produced from batch fermentation. Possession of lower melting temperature indicates an enhanced thermal stability which broadens the polymer processing window.

Biosurfactants produced by Bacillus subtilis A1 and Pseudomonas stutzeri NA3 reduce longevity and fecundity of Anopheles stephensi and show high toxicity against young instars.

Science.gov (United States)

Parthipan, Punniyakotti; Sarankumar, Raja Kumaresan; Jaganathan, Anitha; Amuthavalli, Pandian; Babujanarthanam, Ranganathan; Rahman, Pattanathu K S M; Murugan, Kadarkarai; Higuchi, Akon; Benelli, Giovanni; Rajasekar, Aruliah

2018-04-01

Anopheles stephensi acts as vector of Plasmodium parasites, which are responsible for malaria in tropical and subtropical areas worldwide. Currently, malaria management is a big challenge due to the presence of insecticide-resistant strains as well as to the development of Plasmodium species highly resistant to major antimalarial drugs. Therefore, the present study focused on biosurfactant produced by two bacteria Bacillus subtilis A1 and Pseudomonas stutzeri NA3, evaluating them for insecticidal applications against malaria mosquitoes. The produced biosurfactants were characterized using FT-IR spectroscopy and gas chromatography-mass spectrometry (GC-MS), which confirmed that biosurfactants had a lipopeptidic nature. Both biosurfactants were tested against larvae and pupae of A. stephensi. LC 50 values were 3.58 (larva I), 4.92 (II), 5.73 (III), 7.10 (IV), and 7.99 (pupae) and 2.61 (I), 3.68 (II), 4.48 (III), 5.55 (IV), and 6.99 (pupa) for biosurfactants produced by B. subtilis A1 and P. stutzeri NA3, respectively. Treatments with bacterial surfactants led to various physiological changes including longer pupal duration, shorter adult oviposition period, and reduced longevity and fecundity. To the best of our knowledge, there are really limited reports on the mosquitocidal and physiological effects due to biosurfactant produced by bacterial strains. Overall, the toxic activity of these biosurfactant on all young instars of A. stephensi, as well as their major impact on adult longevity and fecundity, allows their further consideration for the development of insecticides in the fight against malaria mosquitoes.

Producing liquid fuels from biomass

Science.gov (United States)

Solantausta, Yrjo; Gust, Steven

The aim of this survey was to compare, on techno-economic criteria, alternatives of producing liquid fuels from indigenous raw materials in Finland. Another aim was to compare methods under development and prepare a proposal for steering research related to this field. Process concepts were prepared for a number of alternatives, as well as analogous balances and production and investment cost assessments for these balances. Carbon dioxide emissions of the alternatives and the price of CO2 reduction were also studied. All the alternatives for producing liquid fuels from indigenous raw materials are utmost unprofitable. There are great differences between the alternatives. While the production cost of ethanol is 6 to 9 times higher than the market value of the product, the equivalent ratio for substitute fuel oil produced from peat by pyrolysis is 3 to 4. However, it should be borne in mind that the technical uncertainties related to the alternatives are of different magnitude. Production of ethanol from barley is of commercial technology, while biomass pyrolysis is still under development. If the aim is to reach smaller carbon dioxide emissions by using liquid biofuels, the most favorable alternative is pyrolysis oil produced from wood. Fuels produced from cultivated biomass are more expensive ways of reducing CO2 emissions. Their potential of reducing CO2 emissions in Finland is insignificant. Integration of liquid fuel production to some other production line is more profitable.

Magnetic properties and microstructure of as-spun Fe3B/Nd2Fe14B nanocomposite permanent magnets produced by low-speed melt spinning technique

International Nuclear Information System (INIS)

Hirosawa, S.; Kanekiyo, H.; Ping, D.H.; Hono, K.

1998-01-01

Thick permanent magnet flakes of Fe 3 B/Nd 2 Fe 14 B nanocomposites have been produced directly from molten alloys by means of the low surface-velocity melt spinning technique. The thickness of the flakes varies from 70 to 300 μm depending on the surface velocity (V s ) of a quenching copper roll. Melt-spun flakes of Nd 4 Fe 77.5 B 18.5 alloy exhibit the intrinsic coercivity of 276 kA/m at V s of 5 m/s. X-ray diffraction and transmission electron microscopy results have revealed that this material is composed of nanocrystalline Fe 3 B and Nd 2 Fe 14 B grains ranging from 10 to 50 nm in diameter. The melt-spun alloy produced at V s = 3 m/s contains large grains of Nd 2 Fe 14 B, small grains of Fe 3 B, and large dendritic α-Fe of a few μm in length. In contrast, at V s = 7 m/s, a large portion of the quenched alloy is amorphous. These melt-spun alloys do not possess a hard magnetic property. We have also found that small additions of additives affect the optimum range of V s that give rise to hard magnetic properties in the as-melt-spun condition. Cr has a large effect in shifting the optimum V s values down to a 2-3 m/s range. Simultaneous addition of Co and Ga is effective in extending the optimum values of V s . A platelet permanent magnet with a thickness of 240 μm and magnetic properties of (BH) max = 131 kJ/m 3 , H cJ = 400 kA/m, and B r = 1.15 T has been produced from a Nd 3.5 Dy 1 Fe 73 Co 3 Ga 1 B 18.5 alloy. (orig.)

Strain of Fusarium oxysporum Isolated From Almond Hulls Produces Styrene and 7-Methyl-1,3,5-Cyclooctatriene as the Principal Volatile Components

Science.gov (United States)

An isolated strain of Fusarium oxysporum from the hulls of Prunus dulcis (sweet almond) was found to produce relatively large quantities of the hydrocarbons styrene and three isomers of 7-methyl-1,3,5-cyclooctatriene (MCOT). Production of styrene and MCOT was reproduced on small scale using potato d...

Cosmic ray exposure dating with in situ produced cosmogenic 3He: results from young Hawaiian lava flows

Science.gov (United States)

Kurz, M.D.; Colodner, D.; Trull, T.W.; Moore, R.B.; O'Brien, K.

1990-01-01

In an effort to determine the in situ production rate of spallation-produced cosmogenic 3He, and evaluate its use as a surface exposure chronometer, we have measured cosmogenic helium contents in a suite of Hawaiian radiocarbon-dated lava flows. The lava flows, ranging in age from 600 to 13,000 years, were collected from Hualalai and Mauna Loa volcanoes on the island of Hawaii. Because cosmic ray surface-exposure dating requires the complete absence of erosion or soil cover, these lava flows were selected specifically for this purpose. The 3He production rate, measured within olivine phenocrysts, was found to vary significantly, ranging from 47 to 150 atoms g-1 yr-1 (normalized to sea level). Although there is considerable scatter in the data, the samples younger than 10,000 years are well-preserved and exposed, and the production rate variations are therefore not related to erosion or soil cover. Data averaged over the past 2000 years indicate a sea-level 3He production rate of 125 ?? 30 atoms g-1 yr-1, which agrees well with previous estimates. The longer record suggests a minimum in sea level normalized 3He production rate between 2000 and 7000 years (55 ?? 15 atoms g-1 yr-1), as compared to samples younger than 2000 years (125 ?? 30 atoms g-1 yr-1), and those between 7000 and 10,000 years (127 ?? 19 atoms g-1 yr-1). The minimum in production rate is similar in age to that which would be produced by variations in geomagnetic field strength, as indicated by archeomagnetic data. However, the production rate variations (a factor of 2.3 ?? 0.8) are poorly determined due to the large uncertainties in the youngest samples and questions of surface preservation for the older samples. Calculations using the atmospheric production model of O'Brien (1979) [35], and the method of Lal and Peters (1967) [11], predict smaller production rate variations for similar variation in dipole moment (a factor of 1.15-1.65). Because the production rate variations, archeomagnetic data

TNFR2 expression on CD25hiFOXP3+ T cells induced upon TCR stimulation of CD4 T cells identifies maximal cytokine-producing effectors.

Directory of Open Access Journals (Sweden)

Chindu eGovindaraj

2013-08-01

Full Text Available In this study, we show that CD25hiTNFR2+ cells can be rapidly generated in vitro from circulating CD4 lymphocytes by polyclonal stimuli anti-CD3 in the presence of anti-CD28. The in vitro induced CD25hiTNFR2+ T cells express a conventional Treg phenotype FOXP3+CTLA4+CD127lo/-, but produce effector and immunoregulatory cytokines including IL-2, IL-10 and IFN-g. These induced CD25hiTNFR2+ T cells do not suppress target cell proliferation, but enhance it instead. Thus the CD25hiTNFR2+ phenotype induced rapidly following CD3/28 cross linking of CD4 T cells identifies cells with maximal proliferative and effector cytokine producing capability. The in vivo counterpart of this cell population may play an important role in immune response initiation.

77 FR 23807 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Science.gov (United States)

2012-04-20

.... DE C.V.; c/o TECNOLOGIA OPTIMA CORPORATIVA S. DE R.L. DE C.V.; Paseo de los Heroes 108-104, Tijuana...; Folio Mercantil No. 13537 (Mexico); R.F.C. SFO011205UJ8 (Mexico) [SDNTK] TECNOLOGIA OPTIMA CORPORATIVA S...

Surface Effect Ship Structural Producibility. Part 3.

Science.gov (United States)

1980-05-14

KSI FAILURE - ISo - .276 "A4p I ’ 1 7.". P’ALm ,. I.-u -1.-7 .4 1 "/,A 4s-77 I 3qQ# .’I FA iL & 0 I -a- Liii .L-,2 -22 𔄁, I jj ir.i F4I, i11 9 .4122 1...909603 POCI90’l 1L2 9 0, 1800770 1100916 12-9034 A2.Q0456 41005?, j290o.7* 41)9002 SO-0006? 27003 12700071 5000246 ar04132 81*00619 41.0911a 2#0O009O

Studies on the method of producing radiographic 170Tm source

International Nuclear Information System (INIS)

Maeda, Sho

1976-08-01

A method of producing radiographic 170 Tm source has been studied, including target preparation, neutron irradiation, handling of the irradiated target in the hot cell and source capsules. On the basis of the results, practical 170 Tm radiographic sources (29 -- 49Ci, with pellets 3mm in diameter and 3mm long) were produced in trial by neutron irradiation with the JMTR. (auth.)

Stable, fertile, high polyhydroxyalkanoate producing plants and methods of producing them

Energy Technology Data Exchange (ETDEWEB)

Bohmert-Tatarev, Karen; McAvoy, Susan; Peoples, Oliver P.; Snell, Kristi D.

2015-08-04

Transgenic plants that produce high levels of polyhydroxybutyrate and methods of producing them are provided. In a preferred embodiment the transgenic plants are produced using plastid transformation technologies and utilize genes which are codon optimized. Stably transformed plants able to produce greater than 10% dwt PHS in tissues are also provided.

A Radium-223 microgenerator from cyclotron-produced trace Actinium-227

International Nuclear Information System (INIS)

Abou, Diane S.; Pickett, Juile; Mattson, John E.; Thorek, Daniel L.J.

2017-01-01

The alpha particle emitter Radium-223 dichloride ("2"2"3RaCl_2) has recently been approved for treatment of late-stage bone metastatic prostate cancer. There is considerable interest in studying this new agent outside of the clinical setting, however the supply of "2"2"3Ra is limited and expensive. We have engineered a "2"2"3Ra microgenerator using traces of "2"2"7Ac previously generated from cyclotron-produced "2"2"5Ac. Radiochemically pure "2"2"3RaCl_2 was made, characterized, evaluated in vivo, and the source was recovered in high yield for regeneration of the microgenerator. - Highlights: • A "2"2"3Ra microgenerator was built using residual "2"2"7Ac from cyclotron-produced "2"2"5Ac. • Following "2"2"5Ac decay, the residual "2"2"7Ac was processed into pure "2"2"3Ra. • "2"2"7Ac and "2"2"7Th were recovered in high yield for a permanent supply of "2"2"3Ra. • Clinically supplied and generator-produced "2"2"3Ra have equivalent in vivo distribution. • Microdose column provides sufficient material for research use.

Microstructure evaluation of Al-Al2O3 composite produced by mechanical alloying method

International Nuclear Information System (INIS)

Zebarjad, S.M.; Sajjadi, S.A.

2006-01-01

Mechanical alloying process using ball-milling techniques, has received much attention as a powerful tool for fabrication of several advanced materials, including amorphous, quasicrystals, nanocrystalline and composite materials, etc. This research is focused on production of Al-Al 2 O 3 composite materials by mechanical alloying method and on investigation of its microstructure. For this purpose a horizontal ball mill was designed and manufactured. Aluminum and alumina powders, with specified size and weight percent, were added to the mill. The mixed powders were milled at different times. The milled powders were pressed and sintered under argon gas control. Microstructure of produced composite was investigated by scanning electron microscope. The results show that increasing milling time causes to make fine alumina powders as well as uniform distribution within aluminum, also in steady-state stage increasing milling time has not significant effect on their size distribution within aluminum. The results of atomic analysis of initial and milled powders at different times show that at the beginning of milling, the powders will tend to absorb iron and gradually their susceptibility decrease until steady-state condition is prevailed. The result of infrared spectroscopy does not show any evidence of compounds except alumina

Non-destructive assay employing 2D and 3D digital radiographic imaging acquired with thermal neutrons and reactor-produced radioisotopes

International Nuclear Information System (INIS)

Silvani, Maria Ines; Almeida, Gevaldo Lisboa de; Lopes, Ricardo T.

2011-01-01

The inner structure of some objects can only be visualized by using suitable techniques, when safety reasons or expensive costs preclude the application of invasive procedures. The kind of agent rendering an object partially transparent, unveiling thus its features, depends upon the object size and composition. As a rough rule of thumb, light materials are transparent to gamma and X-rays while the heavy ones are transparent to neutrons. When, after traversing an object, they hit a proper 2-D detector, a radiograph is produced representing a convoluted cross section, called projection, of that object. Taking a large number of such projections for different object attitudes, it is possible to obtain a 3-D tomography of the object as a map of attenuation coefficients. This procedure however, besides a time-consuming task, requires specially tailored equipment and software, not always available or affordable. Yet, in some circumstances it is feasible to replace the 3-D tomography by a stereoscopy, allowing one to visualize the spatial configuration of the object under analysis. In this work, 2-D and 3-D radiographic images have been acquired using thermal neutrons and reactor-produced radioisotopes and proper imaging plates as detectors. The stereographic vision has been achieved by taking two radiographs of the same object at different angles, from the detector point of view. After a treatment to render them red-white and green-white they were properly merged to yield a single image capable to be watched with red-green glasses. All the image treatment and rendering has been performed with the software ImageJ. (author)

Method of producing ethyl alcohol

Energy Technology Data Exchange (ETDEWEB)

Philliskirk, G; Yates, H J

1978-09-13

Ethanol was produced from whey by removing protein from the whey by ultrafiltration, concentrating the deproteinized whey by reverse osmosis to a lactose content of at least 8 g/100 mL, fermenting with Candida pseudotropicalis NCYC 744, and distilling. E.g., milk whey was deproteinized to give a permeate containing 8.3 g lactose/100 mL. After fermentation, the final lactose content was 0.1 g/100 mL and the ethanol concentration was 3.55 g/100 mL, representing a 42% conversion of lactose to ethanol.

Surface Roughness of a 3D-Printed Ni-Cr Alloy Produced by Selective Laser Melting: Effect of Process Parameters.

Science.gov (United States)

Hong, Min-Ho; Son, Jun Sik; Kwon, Tae-Yub

2018-03-01

The selective laser melting (SLM) process parameters, which directly determine the melting behavior of the metallic powders, greatly affect the nanostructure and surface roughness of the resulting 3D object. This study investigated the effect of various laser process parameters (laser power, scan rate, and scan line spacing) on the surface roughness of a nickel-chromium (Ni-Cr) alloy that was three-dimensionally (3D) constructed using SLM. Single-line formation tests were used to determine the optimal laser power of 200 W and scan rate of 98.8 mm/s, which resulted in beads with an optimal profile. In the subsequent multi-layer formation tests, the 3D object with the smoothest surface (Ra = 1.3 μm) was fabricated at a scan line spacing of 60 μm (overlap ratio = 73%). Narrow scan line spacing (and thus large overlap ratios) was preferred over wide scan line spacing to reduce the surface roughness of the 3D body. The findings of this study suggest that the laser power, scan rate, and scan line spacing are the key factors that control the surface quality of Ni-Cr alloys produced by SLM.

Dynamics of antifolate transport via the reduced folate carrier and the membrane folate receptor in murine leukaemia cells in vitro and in vivo

NARCIS (Netherlands)

Mauritz, Robert; Peters, Godefridus; Kathmann, Ietje; Teshale, Habte; Noordhuis, Paul; Comijn, Elizabeth; Pinedo, Herbert; Jansen, Gerrit

Murine L1210 leukaemia cells expressing either the reduced folate carrier (RFC) or the membrane folate receptor (MFR) were studied in vitro and in vivo to assess the dynamics of membrane transport of two categories antifolates; folate-based inhibitors of dihydrofolate reductase (methotrexate,

Texture development in Al/Al{sub 2}O{sub 3} MMCs produced by anodizing and ARB processes

Energy Technology Data Exchange (ETDEWEB)

Jamaati, Roohollah, E-mail: r.jamaatikenari@ma.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Toroghinejad, Mohammad Reza [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Hoseini, Majid [Department of Mining, Metals and Materials Engineering, McGill University, Montreal, QC H3A 2B2 (Canada); Szpunar, Jerzy A. [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9 (Canada)

2011-04-25

Research highlights: {yields} The Rotated Cube was the major texture component for most specimens. {yields} The intensity of texture components was weak except the Rotated Cube component. {yields} The texture intensity of composite with low alumina particles was not weak. {yields} Alumina particles and also size and quantity of them are very effective on texture. - Abstract: Anodizing and accumulative roll bonding (ARB) processes were used as a new technique for manufacturing aluminum/alumina composites including various Al{sub 2}O{sub 3} quantities. Textural evolution during ARB process of composites was evaluated using X-ray diffraction (XRD). The effective parameters in texture evolution were the number of cycles (3, 5, 7 and 8 cycles) and alumina quantity (0.48, 1.13, 2.40 and 3.55 vol.%). The texture evolution demonstrated that the Rotated Cube was a major texture component for all specimens except for the produced composite containing 0.48 vol.% alumina after eight cycles. For subsequent composites, the dominant components were Copper and Dillamore. Also, for almost all specimens (except for the composite with 0.48 vol.% alumina), the intensity of the texture components (except for Rotated Cube) was very weak. All these results are related to the presence of the second phase particles and also size and quantity of them.

Comparison of the respiratory tract models of ICRP and US EPA

International Nuclear Information System (INIS)

Wu Tao

2000-01-01

An index for the integral characterization of risk is necessary for improving risk management, comparing the effects of various practices on the environment and keeping risk as low as reasonably achievable while allowing economic development. Public health risk has been used as an index to compare and combine the risks from the presence of a variety of contaminants. In 1994, International Commission on Radiological Protection published the Publication 66 'Human Respiratory Tract Model for Radiological Protection'. Meanwhile US EPA published 'Methods for Derivation of Inhalation Reference Concentrations and Application of Inhalation Dosimetry'. Basically the concept of Reference Concentration (RfC) is similar to that of DAC used in radiation protection. Both of them are derived from the deposited amount of interested contaminants in the respiratory tract. In an attempt to assess the public health risk by combining the ICRP model and the deposited amount corresponding to values of RfC, the main application, especially the fractional deposition, of the respiratory tract model of US EPA is compared with the new respiratory tract model of ICRP. For normal nose breather, when the AMADs of monodisperse aerosol are 0.5 η m, 1 η m, 2 η m, 3 η m, 5 η m, 7 η m and 10 η m, minute volume is 1.2m 3 /h (20L/mim), the corresponding total fractional depositions calculated by the model of the US EPA are 0.33, 0.50, 0.72, 0.85, 0.95, 0.97 and 0.93. With the same condition, the total fractional deposition calculated by the ICRP model is 0.35, 0.51, 0.70, 0.78, 0.82, 0.81 and 0.77. For polydisperse aerosol with default values of ICRP for occupational and environmental exposures, the fractional depositions calculated by US EPA model are 0.82 and 0.50 while that by ICRP are 0.82 and 0.47. In conclusion, (1) The ICRP model is more accurate than the US EPA model and has a wider application. (2) For monodisperse aerosol, when the AMAD of aerosol is less than 3 η m there is no

Advanced Space Power Systems (ASPS): Regenerative Fuel Cells (RFC)

Data.gov (United States)

National Aeronautics and Space Administration — The objective of the regenerative fuel cell project element is to develop power and energy storage technologies that enable new capabilities for future human space...

Defect structures in YBa/sub 2/Cu/sub 3/O/sub 7-x/ produced by electron irradiation

International Nuclear Information System (INIS)

Kirk, M.A.; Baker, M.C.; Liu, J.Z.; Lam, D.J.; Weber, H.W.

1988-01-01

Defect structures in YBa/sub 2/Cu/sub 3/O/sub 7-x/ produced by electron irradiation at 300 K were investigated by transmission electron microscopy. Threshold energies for the production of visible defects were determined to be 152 keV and 131 keV (+- 7 keV) in directions near the a and b (b>a) axes (both perpendicular to c, the long axis in the orthorhombic structure), respectively. During above threshold irradiations in an electron flux of 3x10/sup 18/ cm/sup -2/ s/sup -1/, extended defects were observed to form and grow to sizes of 10-50 nm over 1000 s in material thickness 20-200 nm. Such low electron threshold energies suggest oxygen atom displacements with recoil energies near 20 eV. The observation of movement of twin boundaries during irradiation just above threshold suggests movement of the basal plane oxygen atoms by direct displacement or defect migration processes. Crystals irradiated above threshold were observed after about 24 hours to have transformed to a structure heavily faulted on planes perpendicular to the c axis

Producing a steady-state population inversion

International Nuclear Information System (INIS)

Richards, R.K.; Griffin, D.C.

1986-03-01

An observed steady-state transition at 17.5 nm is identified as the 2p 5 3s3p 4 S/sub 3/2/ → 2p 6 3p 2 P/sub 3/2/ transition in Na-like aluminum. The upper level is populated by electron inner shell ionization of metastable Mg-like aluminum. From the emission intensity, the rate coefficient for populating the upper level is calculated to be approximately 5 x 10 -10 ) cm 3 /sec. Since the upper level is quasimetastable with a lifetime 22 times longer than the lower level, it may be possible to produce a population inversion, if a competing process to populate the lower level can be reduced

Biosurfactant-producing yeasts widely inhabit various vegetables and fruits.

Science.gov (United States)

Konishi, Masaaki; Maruoka, Naruyuki; Furuta, Yoshifumi; Morita, Tomotake; Fukuoka, Tokuma; Imura, Tomohiro; Kitamoto, Dai

2014-01-01

The isolation of biosurfactant-producing yeasts from food materials was accomplished. By a combination of a new drop collapse method and thin-layer chromatography, 48 strains were selected as glycolipid biosurfactant producers from 347 strains, which were randomly isolated from various vegetables and fruits. Of the producers, 69% were obtained from vegetables of the Brassica family. Of the 48 producers, 15 strains gave relatively high yields of mannosylerythritol lipids (MELs), and were identified as Pseudozyma yeasts. These strains produced MELs from olive oil at yields ranging from 8.5 to 24.3 g/L. The best yield coefficient reached 0.49 g/g as to the carbon sources added. Accordingly, MEL producers were isolated at high efficiency from various vegetables and fruits, indicating that biosurfactant producers are widely present in foods. The present results should facilitate their application in the food and related industries.

Using A Priori Information to Improve Atmospheric Duct Estimation

Science.gov (United States)

Zhao, X.

2017-12-01

Knowledge of refractivity condition in the marine atmospheric boundary layer (MABL) is crucial for the prediction of radar and communication systems performance at frequencies above 1 GHz on low-altitude paths. Since early this century, the `refractivity from clutter (RFC)' technique has been proved to be an effective way to estimate the MABL refractivity structure. Refractivity model is very important for RFC techniques. If prior knowledge of the local refractivity information is available (e.g., from numerical weather prediction models, atmospheric soundings, etc.), more accurate parameterized refractivity model can be constructed by the statistical method, e.g. principal analysis, which in turn can be used to improve the quality of the local refractivity retrievals. This work extends the adjoint parabolic equation approach to range-varying atmospheric duct structure inversions, in which a linear empirical reduced-dimension refractivity model constructed from the a priori refractive information is used.

Unusual Δ7,12,19 C35:3 Alkenone Produced by the Mutant Emiliania huxleyi strain CCMP2758 in Culture

Science.gov (United States)

Zheng, Y.; Huang, Y.; Zhang, Y.; Dillon, J. T.

2015-12-01

Alkenones with chain length ranging from C37 to C40 are highly specific biomarkers for certain haptophyte algae in ocean and lake sediments and have been widely used for paleoclimate studies. Short chain alkenones (e.g., C35 and C36) have been found in environmental and culture samples but the origin and structures of these compounds are not fully understood. The benchmark marine alkenone producer, Emiliania huxleyi CCMP2758 strain (the mutant of strain CCMP1742, NEPCC55a) was reported to make 35:2 alkenone when cultured at 15 °C (Prahl et al., 2006). Here we show, when this strain is cultured at lower temperatures (e.g., 4°C), CCMP2758 produces large amount of 35:3 alkenone with unusual double bond positions of Δ7,12,19. We determined the double bond positions of the C35:3 methyl ketonee based on GC-MS analysis of cyclobutylimine derivatives and dimethyl disulfide derivatives respectively, and provide the first temperature calibrations based on the unsaturation ratios of C35 alkenones. Previous studies have found 35:2 alkenone with three methylene interruption in the Black Sea sediment, but it is the first time that an alkenone with a mixed three and five methylene interruption is found. The discovery of short chain alkenones with unusual double bond positions may shed new light to alkenone biosynthesis.

Optimal estimation and scheduling in aquifer management using the rapid feedback control method

Science.gov (United States)

Ghorbanidehno, Hojat; Kokkinaki, Amalia; Kitanidis, Peter K.; Darve, Eric

2017-12-01

Management of water resources systems often involves a large number of parameters, as in the case of large, spatially heterogeneous aquifers, and a large number of "noisy" observations, as in the case of pressure observation in wells. Optimizing the operation of such systems requires both searching among many possible solutions and utilizing new information as it becomes available. However, the computational cost of this task increases rapidly with the size of the problem to the extent that textbook optimization methods are practically impossible to apply. In this paper, we present a new computationally efficient technique as a practical alternative for optimally operating large-scale dynamical systems. The proposed method, which we term Rapid Feedback Controller (RFC), provides a practical approach for combined monitoring, parameter estimation, uncertainty quantification, and optimal control for linear and nonlinear systems with a quadratic cost function. For illustration, we consider the case of a weakly nonlinear uncertain dynamical system with a quadratic objective function, specifically a two-dimensional heterogeneous aquifer management problem. To validate our method, we compare our results with the linear quadratic Gaussian (LQG) method, which is the basic approach for feedback control. We show that the computational cost of the RFC scales only linearly with the number of unknowns, a great improvement compared to the basic LQG control with a computational cost that scales quadratically. We demonstrate that the RFC method can obtain the optimal control values at a greatly reduced computational cost compared to the conventional LQG algorithm with small and controllable losses in the accuracy of the state and parameter estimation.

Use of epidemiologic data in Integrated Risk Information System (IRIS) assessments

International Nuclear Information System (INIS)

Persad, Amanda S.; Cooper, Glinda S.

2008-01-01

In human health risk assessment, information from epidemiologic studies is typically utilized in the hazard identification step of the risk assessment paradigm. However, in the assessment of many chemicals by the Integrated Risk Information System (IRIS), epidemiologic data, both observational and experimental, have also been used in the derivation of toxicological risk estimates (i.e., reference doses [RfD], reference concentrations [RfC], oral cancer slope factors [CSF] and inhalation unit risks [IUR]). Of the 545 health assessments posted on the IRIS database as of June 2007, 44 assessments derived non-cancer or cancer risk estimates based on human data. RfD and RfC calculations were based on a spectrum of endpoints from changes in enzyme activity to specific neurological or dermal effects. There are 12 assessments with IURs based on human data, two assessments that extrapolated human inhalation data to derive CSFs and one that used human data to directly derive a CSF. Lung or respiratory cancer is the most common endpoint for cancer assessments based on human data. To date, only one chemical, benzene, has utilized human data for derivation of all three quantitative risk estimates (i.e., RfC, RfD, and dose-response modeling for cancer assessment). Through examples from the IRIS database, this paper will demonstrate how epidemiologic data have been used in IRIS assessments for both adding to the body of evidence in the hazard identification process and in the quantification of risk estimates in the dose-response component of the risk assessment paradigm

NM WAIDS: A PRODUCED WATER QUALITY AND INFRASTRUCTURE GIS DATABASE FOR NEW MEXICO OIL PRODUCERS

Energy Technology Data Exchange (ETDEWEB)

Martha Cather; Robert Lee; Ibrahim Gundiler; Andrew Sung; Naomi Davidson; Ajeet Kumar Reddy; Mingzhen Wei

2003-04-01

The New Mexico Water and Infrastructure Data System (NM WAIDS) seeks to alleviate a number of produced water-related issues in southeast New Mexico. The project calls for the design and implementation of a Geographical Information System (GIS) and integral tools that will provide operators and regulators with necessary data and useful information to help them make management and regulatory decisions. The major components of this system are: (1) databases on produced water quality, cultural and groundwater data, oil pipeline and infrastructure data, and corrosion information, (2) a web site capable of displaying produced water and infrastructure data in a GIS or accessing some of the data by text-based queries, (3) a fuzzy logic-based, site risk assessment tool that can be used to assess the seriousness of a spill of produced water, and (4) a corrosion management toolkit that will provide operators with data and information on produced waters that will aid them in deciding how to address corrosion issues. The various parts of NM WAIDS will be integrated into a website with a user-friendly interface that will provide access to previously difficult-to-obtain data and information. Primary attention during the first six months of this project has been focused on creating the water quality databases for produced water and surface water, along with collection of corrosion information and building parts of the corrosion toolkit. Work on the project to date includes: (1) Creation of a water quality database for produced water analyses. The database was compiled from a variety of sources and currently has over 4000 entries for southeast New Mexico. (2) Creation of a web-based data entry system for the water quality database. This system allows a user to view, enter, or edit data from a web page rather than having to directly access the database. (3) Creation of a semi-automated data capturing system for use with standard water quality analysis forms. This system improves the

Method for producing small hollow spheres

International Nuclear Information System (INIS)

Hendricks, C.D.

1979-01-01

A method is described for producing small hollow spheres of glass, metal or plastic, wherein the sphere material is mixed with or contains as part of the composition a blowing agent which decomposes at high temperature (T >approx. 600 0 C). As the temperature is quickly raised, the blowing agent decomposes and the resulting gas expands from within, thus forming a hollow sphere of controllable thickness. The thus produced hollow spheres (20 to 10 3 μm) have a variety of application, and are particularly useful in the fabrication of targets for laser implosion such as neutron sources, laser fusion physics studies, and laser initiated fusion power plants

Reduction of radioactivity produced by nuclear explosives

Energy Technology Data Exchange (ETDEWEB)

Lessler, Richard M [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

1970-05-15

Four main sources contribute to the radioactivity produced by a nuclear explosive: 1. Fission products from the nuclear explosive, 2. Fusion products from the nuclear explosive, 3. Induced radioactivity in the nuclear explosive, 4. Induced radioactivity in the environment. This paper will summarize some of the work done at the Lawrence Radiation Laboratory at Livermore to reduce the radioactivity from these sources to levels acceptable for peaceful applications. Although it is theoretically possible to have no radioactivity produced by nuclear explosives, this goal has not been achieved.

Method for producing bonded nonwoven fabrics using ionizing radiation

International Nuclear Information System (INIS)

Drelich, A.H.; Oney, D.G.

1979-01-01

A method is described for producing a resin-bonded nonwoven fabric. The preparation involves forming a fibrous web annealing it and compressing it to provide fiber to fiber contact. A polymerizable binder is applied to the fibrous web which is then treated by ionizing radiation to produce the material. 9 figures, 3 drawing

Emergence of blaNDM-7-Producing Enterobacteriaceae in Gabon, 2016.

Science.gov (United States)

Moussounda, Mesmin; Diene, Seydina M; Dos Santos, Sandra; Goudeau, Alain; François, Patrice; van der Mee-Marquet, Nathalie

2017-02-01

Reports of carbapenemase-producing Enterobacteriaceae in Africa remain rare and assess mostly bla OXA-48 -producing isolates from Mediterranean countries and South Africa. We identified bla NDM-7 -producing Enterobacteriaceae in Gabon in 2016. The isolates contained bla NDM-7 IncX3 plasmids that were unusual and similar to the one described in a colistin-resistant Klebsiella pneumoniae SZ04 isolate from China.

Comparative Genomics of Acetobacterpasteurianus Ab3, an Acetic Acid Producing Strain Isolated from Chinese Traditional Rice Vinegar Meiguichu.

Science.gov (United States)

Xia, Kai; Li, Yudong; Sun, Jing; Liang, Xinle

2016-01-01

Acetobacter pasteurianus, an acetic acid resistant bacterium belonging to alpha-proteobacteria, has been widely used to produce vinegar in the food industry. To understand the mechanism of its high tolerance to acetic acid and robust ability of oxidizing ethanol to acetic acid (> 12%, w/v), we described the 3.1 Mb complete genome sequence (including 0.28 M plasmid sequence) with a G+C content of 52.4% of A. pasteurianus Ab3, which was isolated from the traditional Chinese rice vinegar (Meiguichu) fermentation process. Automatic annotation of the complete genome revealed 2,786 protein-coding genes and 73 RNA genes. The comparative genome analysis among A. pasteurianus strains revealed that A. pasteurianus Ab3 possesses many unique genes potentially involved in acetic acid resistance mechanisms. In particular, two-component systems or toxin-antitoxin systems may be the signal pathway and modulatory network in A. pasteurianus to cope with acid stress. In addition, the large numbers of unique transport systems may also be related to its acid resistance capacity and cell fitness. Our results provide new clues to understanding the underlying mechanisms of acetic acid resistance in Acetobacter species and guiding industrial strain breeding for vinegar fermentation processes.

OHD/HL - RFCDEV/HVT: 2nd charter

Science.gov (United States)

success criteria defined here no later than September 30, 2011. No travel beyond a RFC verification /HSD) Larry Lowe (ABRFC verification focal point) James Coe (APRFC verification focal point) Ashley Nielson (CBRFC verification focal point) Kevin Werner (CBRFC verification co-focal point and SCH

Methionine synthase A2756G and reduced folate carrier1 A80G ...

African Journals Online (AJOL)

Maha Moustafa

2015-10-09

Oct 9, 2015 ... folate carrier (RFC1) A80G gene polymorphisms on the maternal risk for DS. Patients: This ... Peer review under responsibility of Ain Shams University. ... Folate is the general term for a water-soluble B vitamin (vita- min B9) ...

77 FR 71480 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Science.gov (United States)

2012-11-30

... controlled by significant foreign narcotics traffickers as identified by the President. In addition, the... IBARRA, Mayela), Calle Lago de La Doga 5312, Tijuana, Baja California, Mexico; DOB 24 Feb 1961; POB Coahuila, Mexico; Passport 99020046985 (Mexico); R.F.C. CAIM610224 (Mexico) (individual) [SDNTK]. 2...

A critical review of producers of small lactone mycotoxins: patulin, penicillic acid and moniliformin

DEFF Research Database (Denmark)

Frisvad, J.C.

2018-01-01

A very large number of filamentous fungi has been reported to produce the small lactone mycotoxins patulin, penicillic acid and moniliformin. Among the 167 reported fungal producers of patulin, only production by 29 species could be confirmed. Patulin is produced by 3 Aspergillus species, 3...

The spread of KPC-producing Enterobacteriaceae in Spain: WGS analysis of the emerging high-risk clones of Klebsiella pneumoniae ST11/KPC-2, ST101/KPC-2 and ST512/KPC-3.

Science.gov (United States)

Oteo, Jesús; Pérez-Vázquez, María; Bautista, Verónica; Ortega, Adriana; Zamarrón, Pilar; Saez, David; Fernández-Romero, Sara; Lara, Noelia; Ramiro, Raquel; Aracil, Belén; Campos, José

2016-12-01

We analysed the microbiological traits and population structure of KPC-producing Enterobacteriaceae isolates collected in Spain between 2012 and 2014. We also performed a comparative WGS analysis of the three major KPC-producing Klebsiella pneumoniae clones detected. Carbapenemase and ESBL genes were sequenced. The Institut Pasteur MLST scheme was used. WGS data were used to construct phylogenetic trees, to identify the determinants of resistance and to de novo assemble the genome of one representative isolate of each of the three major K. pneumoniae clones. Of the 2443 carbapenemase-producing Enterobacteriaceae isolates identified during the study period, 111 (4.5%) produced KPC. Of these, 81 (73.0%) were K. pneumoniae and 13 (11.7%) were Enterobacter cloacae. Three major epidemic clones of K. pneumoniae were identified: ST11/KPC-2, ST101/KPC-2 and ST512/KPC-3. ST11/KPC-2 differed from ST101/KPC-2 and ST512/KPC-3 by 27 819 and 6924 SNPs, respectively. ST101/KPC-2 differed from ST512/KPC-3 by 28 345 SNPs. Nine acquired resistance genes were found in ST11/KPC-2, 11 in ST512/KPC-3 and 13 in ST101/KPC-2. ST101/KPC-2 had the highest number of virulence genes (20). An 11 bp deletion at the end of the mgrB sequence was the cause of colistin resistance in ST512/KPC-3. KPC-producing Enterobacteriaceae are increasing in Spain. Most KPC-producing K. pneumoniae isolates belonged to only five clones: ST11 and ST512 caused interregional spread, ST101 caused regional spread and ST1961 and ST678 produced independent hospital outbreaks. ST101/KPC-2 had the highest number of resistance and virulence genes. ST101/KPC-2 and ST512/KPC-3 were recently implicated in the spread of KPC in Italy. © The Author 2016. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Attempt to produce silicide fuel elements in Indonesia

International Nuclear Information System (INIS)

Soentono, S.; Suripto, A.

1991-01-01

After the successful experiment to produce U 3 Si 2 powder and U 3 Si 2 -Al fuel plates using depleted U and Si of semiconductor quality, silicide fuel was synthesized using x -Al available at the Fuel Element Production Installation (FEPI) at Serpong, Indonesia. Two full-size U 3 Si 2 -Al fuel elements, having similar specifications to the ones of U 3 O 8 -Al for the RSG-GAS (formerly known as MPR-30), have been produced at the FEPI. All quality controls required have been imposed to the feeds, intermediate, as well as final products throughout the production processes of the two fuel elements. The current results show that these fuel elements are qualified from fabrication point of view, therefore it is expected that they will be permitted to be tested in the RSG-GAS, sometime by the end of 1989, for normal (∝50%) and above normal burn-up. (orig.)

The behavior of lattice defects produced in Al2O3 irradiated by neutrons at high temperatures

International Nuclear Information System (INIS)

Atobe, K.; Koizumi, T.; Okada, M.

2003-01-01

Single crystals of α-Al 2 O 3 were irradiated by the two reactors, KUR and JMTR, at three different temperatures. Lattice defects produced by irradiation were studied by esr (electron spin resonance). Three kinds of esr spectram, which are denoted as A, B and C spectram, are observed. The spectram A was observed at three different irradiation temperatures and was ascribed to oxygen vacancies. The spectram B showed no angular dependence for the rotation of external magnetic field to the crystal axis, and the defect density of this spectram decreased with an increase of annealing temperature. When the specimen was annealed at 400 degC after irradiation at 200 degC, the spectram C was observed and was presumed to be due to Al-colloids. (Y. Kazumata)

CCT`s in a deregulated environment: A producer`s perspective

Energy Technology Data Exchange (ETDEWEB)

Edmonds, R.F. Jr.; Fayssoux, J.O. [Duke Power Co., Charlotte, NC (United States)

1997-12-31

The US electric industry will be deregulated (or substantially re-regulated) within 5 years. Several states, including California, Rhode Island, and New Hampshire, already have passed legislation to introduce competition into the electric markets before the year 2000. As this trend sweeps across the country, the resulting competitive market for generation will reward the lowest cost producers and force high cost producers out of the market. As a result, at least in the short run, it may be very difficult for new power plants employing Clean Coal Technologies (CCTs) to compete. This paper discusses a producer`s perspective of the new competitive market, and suggests several short and long term strategies and niches for CCTs.

Radiation produced by electrons incident on molecules

International Nuclear Information System (INIS)

Moehlman, G.R.

1977-01-01

The work described in this thesis deals with light intensity measurements of emission spectra (1850-9000 A) produced by a continuous or pulsed beam of monoenergetic electrons (0 - 2000 eV) incident on a variety of molecular gases like H 2 , D 2 , H 2 O, HCl, NH 3 and several hydrocarbons. The emission spectra are dominated by fluorescence from excited fragments produced via dissociative excitation, besides fluorescence from excited parent molecules themselves. The experimental results thus obtained are expressed in terms of emission cross sections and lifetimes

Comparative study of AISI M3:2 high speed steel produced through different techniques of manufacturing; Estudo comparativo de acos rapidos AISI M3:2 produzidos por diferentes processos de fabricacao

Energy Technology Data Exchange (ETDEWEB)

Araujo Filho, Oscar Olimpio de

2006-07-01

In this work AISI M3:2 high speed steels obtained through different techniques of manufacturing, submitted to the same heat treatment procedure were evaluated by measuring their mechanical properties of transverse rupture strength and hardness. Sinter 23 obtained by hot isostatic pressing (HIP), VWM3C obtained by the conventional route and a M3:2 high speed steel obtained by cold compaction of water atomized powders and vacuum sintered with and without the addition of a small quantity of carbon were evaluated after the same heat treatment procedure. The vacuum sintered M3:2 high speed steel can be an alternative to the more expensive high speed steel produced by hot isostatic pressing and with similar properties presented by the conventional one. The characterization of the vacuum sintered M3:2 high speed steel was performed by measuring the densities of the green compacts and after the sintering cycle. The sintering produced an acceptable microstructure and densities near to the theoretical. The transverse rupture strength was evaluated by means of three point bending tests and the hardness by means of Rockwell C and Vickers tests. The technique of scanning electronic microscopy (SEM) was used to evaluate the microstructure and to establish a relation with the property of transverse rupture strength. The structure was determined by means of X-ray diffraction (XRD) patterns and the retained austenite was detected to all the conditions of heat treatment. The main contribution of this work is to establish a relation between the microstructure and the mechanical property of transverse rupture strength and to evaluate the AISI M3:2 vacuum sintered high speed steel as an alternative to the similar commercial high speed steels. (author)

26 CFR 1.613A-3 - Exemption for independent producers and royalty owners.

Science.gov (United States)

2010-04-01

... § 1.705-1(a)(2)(iii). (iii) Upon the disposition of an oil or gas property by the partnership, each....613A-4, the allowance for depletion under section 611 with respect to oil or gas which is produced... daily production (as defined in paragraph (f) of § 1.613A-7) of domestic crude oil (as defined in...

Process for producing a polymer

Energy Technology Data Exchange (ETDEWEB)

Koshimura, M; Haruta, K; Matsuzaka, J; Terakado, H

1969-02-13

A novel polymer is produced by a novel polymerization or copolymerization process in the presence of a free radical-forming catalyst or radical-forming irradiation energy to provide a monomer of the general formula CH/sub 2/=C(R/sub 1/)(COO)-(R/sub 2/OOCR/sub 3/COO)sub(n)-R/sub 2/OH wherein R/sub 1/ is hydrogen, halogen or alkyl radical containing one or two atoms; R/sub 2/ is an epoxy compound residue; R/sub 3/ is a polybasic anhydride residue; and n is an integer. This polymer: (1) enables the cross-linking reaction, (2) improves the adhesiveness of adhesives, pigments, films and coatings; (3) is adjustable for mutual solubility and affinity when blending with other solvents and resins; (4) is resistant to yellowing and mechanically stronger than the benzene nucleus of styrene; (5) improves the textile dyeing affinity, adhesiveness and dispersion of pigments, and the dimensional stability of films and sheets; (6) is suitable as a molding material of synthetic resins, adhesives and coatings because of its three dimensional cross-linking construction; (7) can control the hardness, flexibility and rigidity of the molding materials; and (8) can lower the cost of production. In an example, 10 g of the monomer of the above mentioned formula wherein n=1, R/sub 1/=CH/sub 3/, R/sub 2/=-(CH/sub 2/)/sub 2/ and R/sub 3/ is ortho-substituted benzene, and 0.1 g of benzol peroxide, are added to ampoule, sealed and polymerized at 120/sup 0/C for 2 hours. Next the contents are precipitated in a large amount of benzene to produce a polymer having a molecular weight of 9,500. The products have good dimensional stability as molding materials.

The mineralogy of bauxite for producing smelter-grade alumina

Science.gov (United States)

Authier-Martin, M.; Forte, G.; Ostap, S.; See, J.

2001-12-01

Aluminum-producing companies rely on low-cost, high-purity, smelter-grade alumina (aluminum oxide), and alumina production utilizes the bulk of bauxites mined world-wide. The mineralogy of the bauxites has a significant impact on the operation of the Bayer process for alumina production. Typically, the Bayer process produces smelter-grade alumina of 99.5% Al2O3, starting from bauxite containing 30% to 60% Al2O3. The main objective of the Bayer process is to extract the maximum amount of aluminum from the bauxite at as high an aluminate concentration in solution as possible, while limiting any troublesome side reactions. Only with a better understanding of the chemistry of the mineral species and a strict control of the operating/processing conditions can the Bayer process produce efficiently, a low cost, high-quality alumina with minimum detrimental environmental impact.

Active caspase-3 and ultrastructural evidence of apoptosis in spontaneous and induced cell death in bovine in vitro produced pre-implantation embryos

DEFF Research Database (Denmark)

Gjørret, Jakob O.; Fabian, Dusan; Avery, Birthe

2007-01-01

In this study we investigated chronological onset and involvement of active caspase-3, apoptotic nuclear morphology, and TUNEL-labeling, as well as ultrastructural evidence of apoptosis, in both spontaneous and induced cell death during pre-implantation development of bovine in vitro produced...... microscopy in both treated and untreated blastocysts. Activation of caspase-3 is likely involved in both spontaneous and induced apoptosis in bovine pre-implantation embryos, and immunohistochemical staining of active caspase-3 may be used in combination with other markers to identify apoptosis in pre...... embryos. Pre-implantation embryos (2-cell to Day 8 blastocysts) were cultured with either no supplementation (untreated) or with 10 µM staurosporine for 24 hr (treated). Embryos were subjected to immunohistochemical staining of active caspase-3, TUNEL-reaction for detection of DNA degradation and DAPI...

Cost of producing U3O8 from ammonium bicarbonate in situ leach solution by the multiple-compartment ion-exchange system

International Nuclear Information System (INIS)

Hayashi, M.; Dolezal, H.

1979-01-01

The Bureau of Mines estimated the cost for a uranium ion-exchange recovery system using five grades of U 3 O 8 leach solution producing 815,570 pounds of U 3 O 8 per year from an ammonium bicarbonate in situ leach solution. The system flowsheet consisted of four unit operations: (1) Multiple-compartment ion-exchange (MCIX) absorption; (2) MCIX elution; (3) precipitation of the uranium as yellow cake, filtering, calcining, and packaging; and (4) waste disposal. The total fixed capital cost of a system treating 2,000 gallons per minute of 0.1-gram-per-liter-U 3 O 8 leach solution was estimated as $6,888,000. For a basic case of an MCIX system depreciating in 9 years, unit production cost of U 3 O 8 was $3.51 per pound. A decrease in feed solution grade from 0.4 to 0.03 gram per liter increased the production cost exponentially. Shorter depreciating periods significantly increased the production cost particularly for the lower grade feed solutions

Oxygen Isotope Composition of Nitrate Produced by Freshwater Nitrification

Science.gov (United States)

Boshers, D.; Granger, J.; Bohlke, J. K.

2016-12-01

Measurements of the naturally occurring nitrogen and oxygen stable isotope ratios of nitrate (NO3-), δ15N and δ18O, can be used to determine the source, dispersal, and fate of natural and contaminant NO3- in aquatic environments. To this end, it is necessary to know the extent to which NO3- isotopologues are modified by biological reactions, as heavy and light isotopes have different reaction rates. The purpose of this study was to determine the influence of the δ18O of ambient water on the isotope composition of NO3- produced during nitrification, the biological oxidation of ammonium (NH4+) to nitrite (NO2-) and then NO3-, which is poorly constrained in freshwater systems. To determine the δ18O of NO3- produced by nitrification in freshwater, we collected water from a stream in New England, which we amended with NH4+ and with increments of 18O-enriched water, to monitor the isotope composition of NO3- produced by a natural consortium of nitrifiers. Added NH4+ was completely oxidized to NO3- over 26 days. The final δ18O of nitrified NO3- revealed sensitivity to the δ18O of water mediated by (a) isotopic equilibration between water and NO2- and (b) kinetic isotope fractionation during O-atom incorporation from water into NO2- and NO3-. Our results concur with nitrifying culture experiments that have demonstrated analogous sensitivity of the δ18O of nitrified NO3- to equilibrium and kinetic O isotope effects (Buchwald et al. 2012), as well as show that these dynamics need to be considered to interpret NO3- isotope distribution in freshwater environments.

Observations of VOC emissions and photochemical products over US oil- and gas-producing regions using high-resolution H3O+ CIMS (PTR-ToF-MS

Directory of Open Access Journals (Sweden)

A. Koss

2017-08-01

Full Text Available VOCs related to oil and gas extraction operations in the United States were measured by H3O+ chemical ionization time-of-flight mass spectrometry (H3O+ ToF-CIMS/PTR-ToF-MS from aircraft during the Shale Oil and Natural Gas Nexus (SONGNEX campaign in March–April 2015. This work presents an overview of major VOC species measured in nine oil- and gas-producing regions, and a more detailed analysis of H3O+ ToF-CIMS measurements in the Permian Basin within Texas and New Mexico. Mass spectra are dominated by small photochemically produced oxygenates and compounds typically found in crude oil: aromatics, cyclic alkanes, and alkanes. Mixing ratios of aromatics were frequently as high as those measured downwind of large urban areas. In the Permian, the H3O+ ToF-CIMS measured a number of underexplored or previously unreported species, including aromatic and cycloalkane oxidation products, nitrogen heterocycles including pyrrole (C4H5N and pyrroline (C4H7N, H2S, and a diamondoid (adamantane or unusual monoterpene. We additionally assess the specificity of a number of ion masses resulting from H3O+ ion chemistry previously reported in the literature, including several new or alternate interpretations.

Observations of VOC emissions and photochemical products over US oil- and gas-producing regions using high-resolution H3O+ CIMS (PTR-ToF-MS)

Science.gov (United States)

Koss, Abigail; Yuan, Bin; Warneke, Carsten; Gilman, Jessica B.; Lerner, Brian M.; Veres, Patrick R.; Peischl, Jeff; Eilerman, Scott; Wild, Rob; Brown, Steven S.; Thompson, Chelsea R.; Ryerson, Thomas; Hanisco, Thomas; Wolfe, Glenn M.; St. Clair, Jason M.; Thayer, Mitchell; Keutsch, Frank N.; Murphy, Shane; de Gouw, Joost

2017-08-01

VOCs related to oil and gas extraction operations in the United States were measured by H3O+ chemical ionization time-of-flight mass spectrometry (H3O+ ToF-CIMS/PTR-ToF-MS) from aircraft during the Shale Oil and Natural Gas Nexus (SONGNEX) campaign in March-April 2015. This work presents an overview of major VOC species measured in nine oil- and gas-producing regions, and a more detailed analysis of H3O+ ToF-CIMS measurements in the Permian Basin within Texas and New Mexico. Mass spectra are dominated by small photochemically produced oxygenates and compounds typically found in crude oil: aromatics, cyclic alkanes, and alkanes. Mixing ratios of aromatics were frequently as high as those measured downwind of large urban areas. In the Permian, the H3O+ ToF-CIMS measured a number of underexplored or previously unreported species, including aromatic and cycloalkane oxidation products, nitrogen heterocycles including pyrrole (C4H5N) and pyrroline (C4H7N), H2S, and a diamondoid (adamantane) or unusual monoterpene. We additionally assess the specificity of a number of ion masses resulting from H3O+ ion chemistry previously reported in the literature, including several new or alternate interpretations.

Evaluation of an improved algorithm for producing realistic 3D breast software phantoms: Application for mammography

International Nuclear Information System (INIS)

Bliznakova, K.; Suryanarayanan, S.; Karellas, A.; Pallikarakis, N.

2010-01-01

Purpose: This work presents an improved algorithm for the generation of 3D breast software phantoms and its evaluation for mammography. Methods: The improved methodology has evolved from a previously presented 3D noncompressed breast modeling method used for the creation of breast models of different size, shape, and composition. The breast phantom is composed of breast surface, duct system and terminal ductal lobular units, Cooper's ligaments, lymphatic and blood vessel systems, pectoral muscle, skin, 3D mammographic background texture, and breast abnormalities. The key improvement is the development of a new algorithm for 3D mammographic texture generation. Simulated images of the enhanced 3D breast model without lesions were produced by simulating mammographic image acquisition and were evaluated subjectively and quantitatively. For evaluation purposes, a database with regions of interest taken from simulated and real mammograms was created. Four experienced radiologists participated in a visual subjective evaluation trial, as they judged the quality of the simulated mammograms, using the new algorithm compared to mammograms, obtained with the old modeling approach. In addition, extensive quantitative evaluation included power spectral analysis and calculation of fractal dimension, skewness, and kurtosis of simulated and real mammograms from the database. Results: The results from the subjective evaluation strongly suggest that the new methodology for mammographic breast texture creates improved breast models compared to the old approach. Calculated parameters on simulated images such as β exponent deducted from the power law spectral analysis and fractal dimension are similar to those calculated on real mammograms. The results for the kurtosis and skewness are also in good coincidence with those calculated from clinical images. Comparison with similar calculations published in the literature showed good agreement in the majority of cases. Conclusions: The

Phenotypic identification, frequency distribution and antibiogram of carbapenemase producing enterobacteriaceae in clinical isolates

International Nuclear Information System (INIS)

Ansari, M.; Saad, N.

2018-01-01

Objective:To differentiate between Ambler class A, B and D of carbapenemase-producing Enterobacteriaceae by using simple phenotypic methods that can be carried out in the laboratory without requiring any specialised techniques. Study Design:Cross-sectional study. Place and Duration of Study:Microbiology Department, Army Medical College, NUST, Islamabad, from November 2015 to November 2016. Methodology: Clinical specimens were subjected to identification of Enterobacteriaceae by colony morphology and API 20 E. Carbapenem resistance was detected by applying meropenem disc (10 mu g) by disc diffusion method according to CLSI (Clinical Laboratory Standard Institute) criteria. Carbapenemase production among Enterobacteriaceaewas detected by Modified Hodge test. Phenotypic methods, Phenylboronic acid (for Class A KPC producing Enterobacteriaceae) and EDTA inhibition tests (for Class B MBL producing Entrobacteriaceae) were applied. Presence of OXA 48 was detected by phenotypic method using imipenem 10 mu g, EDTA and PBA discs. Antibiotic susceptibility was determined by Kirby-Bauer disc diffusion method. Results:Forty-three out of 45 (95.45%) were carbapenemase producers. Thirty-eight out of 43 (88.3%) were KPC producers and 4 out of 43 (11.62%) were MBL producers. All KPC producers were Klebsiella pneumoniae. Among five MBL producers, one each (20%) was Enterobacter cloacae and Escherichia coli and 3 (60%) were Klebsiella pneumoniae. All MBL producers were resistant to aztreonam and amoxicillin/clavulanate. Two of the KPC producing Klebsiella pneumoniaewere pan-drug resistant (resistant to colistin and tigecycline). Two were non-carbapenemase producers. Conclusion:Enterobacteriaceaestrains producing KPC-type carbapenemase were the most prevalent (88.3%) in the studied healthcare setup. (author)

Inactivation of exopolysaccharide and 3-hydroxypropionaldehyde-producing lactic acid bacteria in apple juice and apple cider by enterocin AS-48.

Science.gov (United States)

Martínez-Viedma, Pilar; Abriouel, Hikmate; Omar, Nabil Ben; Valdivia, Eva; López, Rosario Lucas; Gálvez, Antonio

2008-03-01

The bacteriocin enterocin AS-48 was tested against exopolysaccharide producing lactic acid bacteria (LAB) strains of Lactobacillus collinoides, Lactobacillus dioliovorans and Pediococcus parvulus as well as two 3-hydroxypropionaldehyde (3-HPA)-producing Lb. collinoides strains causing apple cider spoilage. In fresh-made apple juice, a bacteriocin concentration of 2.5 microg/ml reduced the LAB viable cell counts below detection levels during the course of incubation at 10 and 22 degrees C for most strains tested, except for Lb. collinoides 5 and Lb. dioliovorans 29. These two strains were significantly inhibited at 10 degrees C by 5 microg/ml AS-48 or completely inactivated at 22 degrees C. In a commercial Basque apple cider, the added bacteriocin (2.5 microg/ml for Lb. collinoides strains 9 and 10, and 5 microg/ml for the rest of strains) completely inactivated all LAB strains tested during storage at 10 as well as 22 degrees C. In the commercial Asturian apple cider tested the LAB strains showed a poor capacity for survival, but the added bacteriocin was equally effective in reducing the numbers of survivors. When a cocktail of the five LAB strains was tested in commercial Basque apple cider, viable cell counts were reduced below detection levels after 2 days for a bacteriocin concentration of 12.5 microg/ml regardless of storage temperature. Comparison of RAPD-PCR profiles revealed that strain Lb. dioliovorans 29 was always the predominant survivor detected in bacteriocin-treated samples.

Application of RF correction in thin-layer chromatography by means of two reference RF values

NARCIS (Netherlands)

Dhont, J.H.; Vinkenborg, C.; Compaan, H.; Ritter, F.J.; Labadie, R.P.; Verweij, A.; Zeeuw, R.A. de

1972-01-01

Results of the inter-laboratory experiment described in this paper show that the GALANOS AND KAPOULAS equation can be applied satisfactorily to correct RF values obtained on thin-layer chromatograms in a polar multi-component solvent. Addition of Kieselguhr to the silica gel gives RFc values

ORF Alignment: Ca19AnnotatedDec2004aaSeq [GENIUS II[Archive

Lifescience Database Archive (English)

Full Text Available Ca19AnnotatedDec2004aaSeq orf19.2029; Contig19-10139; 79190..80278; RFC5*; DNA replicationn factor C | lead...ing strand elongation mismatch repair ... (ATPase); >1a5t0 2 329 7 339 1e-22 ... gb|EAL00

Investigation of the accuracy of MV radiation isocentre calculations in the Elekta cone-beam CT software XVI

DEFF Research Database (Denmark)

Zimmermann, S. J.; Rowshanfarzad, P.; Ebert, M. A.

2015-01-01

) and the radiation field centre (RFC) is calculated. A software package was developed for accurate calculation of the linac isocentre position. This requires precise determination of the position of the ball bearing and the RFC. Results: Data were acquired for 6 MV, 18 MV and flattening filter free (FFF) 6 MV FFF...... radiation isocentre prior to routine use of the cone-beam CT system. The isocentre determination method used in the XVI software is not available to users. The aim of this work is to perform an independent evaluation of the Elekta XVI 4.5 software for isocentre verification with focus on the robustness...... iView GT software. Two images were acquired at each cardinal gantry angle (-180o, -90o , 0o, 90o) at two opposing collimator angles. The images were exported to the conebeam CT software XVI 4.5 where the difference between the ball bearing position in the XYZ-room coordinates (IEC61217...

Safety and efficacy of pralatrexate in the management of relapsed or refractory peripheral T-cell lymphoma.

Science.gov (United States)

Rodd, Annabelle L; Ververis, Katherine; Karagiannis, Tom C

2012-01-01

Peripheral T-cell lymphoma (PTCL) represents a relatively rare group of heterogeneous non-Hodgkin lymphomas, with generally poor prognosis. Historically, there has been a lack of consensus regarding appropriate therapeutic measures for the disease, with conventional frontline chemotherapies being utilized in most cases. Following promising results obtained in 2009, the methotrexate analogue, pralatrexate, became the first drug to gain US FDA approval for the treatment of refractory PTCL. This antimetabolite was designed to have a higher affinity for reduced folate carrier (RFC) and folylpolyglutamate synthetase (FPGS). RFC is the principal transporter for cell entrance of folates and antifolates. Once inside the cell, pralatrexate is efficiently polyglutamated by FPGS. Pralatrexate has demonstrated varying degrees of efficacy in peripheral T-cell lymphoma, with response rates differing between the multiple subtypes of the disease. While phase III studies are still to be completed, early clinical trials indicate that pralatrexate is promising new therapeutic for PTCL.

Suppression of gross chromosomal rearrangements by a new alternative replication factor C complex

International Nuclear Information System (INIS)

Banerjee, Soma; Sikdar, Nilabja; Myung, Kyungjae

2007-01-01

Defects in DNA replication fidelity lead to genomic instability. Gross chromosomal rearrangement (GCR), a type of genomic instability, is highly enhanced by various initial mutations affecting DNA replication. Frequent observations of GCRs in many cancers strongly argue the importance of maintaining high fidelity of DNA replication to suppress carcinogenesis. Recent genome wide screens in Saccharomyces cerevisiae identified a new GCR suppressor gene, ELG1, enhanced level of genome instability gene 1. Its physical interaction with proliferating cell nuclear antigen (PCNA) and complex formation with Rfc2-5p proteins suggest that Elg1 functions to load/unload PCNA onto DNA during a certain DNA metabolism. High level of DNA damage accumulation and enhanced phenotypes with mutations in genes involved in cell cycle checkpoints, homologous recombination (HR), or chromatin assembly in the elg1 strain suggest that Elg1p-Rfc2-5p functions in a fundamental DNA metabolism to suppress genomic instability

Modification of carbon fabrics by radio-frequency capacitive discharge at low pressure to regulate mechanical properties of carbon fiber reinforced plastics based on it

International Nuclear Information System (INIS)

Garifullin, A R; Krasina, I V; Skidchenko, E A; Shaekhov, M F; Tikhonova, N V

2017-01-01

To increase the values of mechanical properties of carbon fiber (CF) composite materials used in sports equipment production the method of radio-frequency capacitive (RFC) low-pressure plasma treatment in air was proposed. Previously it was found that this type of modification allows to effectively regulate the surface properties of fibers of different nature. This treatment method differs from the traditional ones by efficiency and environmental friendliness as it does not require the use of aggressive, environmentally hazardous chemicals. In this paper it was established that RFC low-pressure air plasma treatment of carbon fabrics enhances the interlaminar shear strength (ILSS) of carbon fiber reinforced plastic (CFRP). As a result of experimental studies of CF by Fourier Transform Infrared (FTIR) spectroscopy method it was proved that after radio-frequency capacitive plasma treatment at low pressure in air the oxygen-containing functional groups is grafted on the surface. These groups improve adhesion at the interface “matrix-fiber”. (paper)

Occurrence of mycotoxin producing fungi in bee pollen.

Science.gov (United States)

González, G; Hinojo, M J; Mateo, R; Medina, A; Jiménez, M

2005-11-15

The natural mycobiota occurring in bee pollen is studied in the present report with special attention to analyze the incidence of fungal species that are potential producers of mycotoxins. A total of 90 ready-to-eat bee pollen samples were analyzed. Eighty-seven samples were collected in stores placed in different Spanish areas and three were from Buenos Aires (Argentina). The statistical results (ANOVA) showed that yeasts and Penicillium spp. were the predominant fungi. With regard to the potential mycotoxin producing species, Penicillium verrucosum, Aspergillus niger aggregate, Aspergillus carbonarius, Aspergillus ochraceus, Aspergillus flavus, Aspergillus parasiticus and Alternaria spp. were found. The last genus was isolated very frequently. The potential ability for producing ochratoxin A (OTA) and aflatoxins B(1), B(2), G(1) and G(2) was studied by culturing in vitro the isolates followed by analysis of these mycotoxins in culture extracts by HPLC with fluorescent detection. It was found that 100%, 53.3%, 33.3% and 25% of the isolates of A. carbonarius, A. ochraceus, P. verrucosum and A. niger aggregate, respectively, produced OTA. Moreover, 28.6% of the isolates from the A. flavus plus A. parasiticus group were able to produce aflatoxin B(1). Aflatoxin B(2) was detected in only 10% of the cultures. Aflatoxins G(1) and G(2) were not detected in cultures under the assayed conditions. This is the first report carried out on the natural mycobiota occurring in bee pollen in general and on the toxigenic capability of these isolates in particular.

Occurrence and characteristics of extended-spectrum β-lactamase (ESBL producing Enterobacteriaceae in food producing animals, minced meat and raw milk

Directory of Open Access Journals (Sweden)

Geser Nadine

2012-03-01

Full Text Available Abstract Background The impact of food animals as a possible reservoir for extended-spectrum beta-lactamase (ESBL producing Enterobacteriaceae, and the dissemination of such strains into the food production chain need to be assessed. In this study 334 fecal samples from pigs, cattle, chicken and sheep were investigated at slaughter. Additionally, 100 raw milk samples, representing bulk tank milk of 100 different dairy farms, 104 minced meat (pork and beef samples and 67 E. coli isolates from cattle E. coli mastitis were analyzed. Results As many as 15.3% of the porcine, 13.7% of the bovine, 8.6% of the sheep and 63.4% of the chicken fecal samples yielded ESBL producers after an enrichment step. In contrast, none of the minced meat, none of the bulk tank milk samples and only one of the mastitis milk samples contained ESBL producing strains. Of the total of 91 isolates, 89 were E. coli, one was Citrobacter youngae and one was Enterobacter cloacae. PCR analysis revealed that 78 isolates (85.7% produced CTX-M group 1 ESBLs while six isolates (6.6% produced CTX-M group 9 enzymes. Five detected ESBLs (5.5% belonged to the SHV group and 2 isolates (2.2% contained a TEM-type enzyme. A total of 27 CTX-M producers were additionally PCR-positive for TEM-beta-lactamase. The ESBL-encoding genes of 53 isolates were sequenced of which 34 produced CTX-M-1, 6 produced CTX-M-14, 5 produced CTX-M-15 and also 5 produced SHV-12. Two isolates produced TEM-52 and one isolate expressed a novel CTX-M group 1 ESBL, CTX-M-117. One isolate--aside from a CTX-M ESBL-- contained an additional novel TEM-type broad-spectrum beta-lactamase, TEM-186. Conclusions The relatively high rates of ESBL producers in food animals and the high genetic diversity among these isolates are worrisome and indicate an established reservoir in farm animals.

Experimental determination of the real elements of the density matrix of H(n=3) atoms produced in 20--100-keV collisions of H+ on Kr

International Nuclear Information System (INIS)

Seifert, N.; Gibson, N.D.; Risley, J.S.

1995-01-01

In continuation of our previous work, charge transfer processes occurring in protons on rare-gas-atom collisions have been investigated. Diagonal and real off-diagonal coherence elements of the density matrix for H(n=3) atoms produced in 20--100-keV electron-capture collisions with Kr atoms are experimentally determined by analyzing the Balmer-α light from the decay of H atoms from the (n=3) state to the (n=2) state. The intensity and polarization of the emitted light are measured as functions of an axially symmetric electric field in the collision region. These data are fitted to a numerical model of the H atom in an electric field in order to extract density-matrix elements. The results are compared to previous studies of H + on He and Ar. The collisionally produced dipole moment of the H(n=3) atom decreases for increasing atomic number of the rare-gas target atoms, which indicates that the final phase of the collision process is not essential for the formation of the dipole moment. This physical picture is further supported by our alignment data. Absolute cross sections for charge transfer to the 3s, 3p, and 3d levels are presented as well

Particles produced in association with PSI(3098)

International Nuclear Information System (INIS)

Alverson, G.O.

1979-01-01

Dimuon production was studied at 217 GeV/c in π - -hydrogen and π - -beryllium collisions with a multiparticle spectrometer to detect associated particles. Particular attention was paid to the phiγ spectrum which shows an excess of events in the region 3.5 GeV. Attributing this to the presence of the chi(approx. 3.5) states implies that 94 +- 50% of psis are produced via radiative chi decay

Improved production, purification, and characterization of biosurfactants produced by Serratia marcescens SM3 and its isogenic SMRG-5 strain.

Science.gov (United States)

Rosas-Galván, Nashbly Sarela; Martínez-Morales, Fernando; Marquina-Bahena, Silvia; Tinoco-Valencia, Raunel; Serrano-Carreón, Leobardo; Bertrand, Brandt; León-Rodríguez, Renato; Guzmán-Aparicio, Josefina; Alvaréz-Berber, Laura; Trejo-Hernández, María R

2018-02-19

In this study, the biosurfactants (Bs) production of two Serratia marcescens strains (SM3 and its isogenic SMRG-5 strain) was improved and the tenso-active agents were purified and characterized. A 2 3 factorial design was used to evaluate the effect of nitrogen and carbon sources on the surface tension (ST) reduction and emulsion index (EI 24 ) of the produced Bs. Optimum Bs production by SM3 was achieved at high concentrations of carbon and nitrogen, reducing ST to 26.5 ± 0.28 dynes/cm, with an EI 24 of 79.9 ± 0.2%. Meanwhile, the best results for SMRG-5 were obtained at low concentrations, reducing the ST to 25.2 ± 0.2 dynes/cm, with an EI 24 of 89.7 ± 0.28%. The optimal conditions for Bs production were scaled up in a 2-L reactor, yielding 4.8 and 5.2 g/L for SM3 and SMRG-5, respectively. Gas Chromatography-Mass Spectrometry (GC-MS) analysis revealed the presence of two different lipopeptides (hidrofobic fractions: octadecanoic and hexadecanoic acid for SM3 and SMRG5, respectively). Both strains were capable of benzo [a] pyrene removal (59% after 72 H of culture). © 2018 International Union of Biochemistry and Molecular Biology, Inc.

Surface structures and osteoblast response of hydrothermally produced CaTiO{sub 3} thin film on Ti-13Nb-13Zr alloy

Energy Technology Data Exchange (ETDEWEB)

Park, Jin-Woo, E-mail: jinwoo@knu.ac.kr [Department of Periodontology, School of Dentistry, Kyungpook National University, 188-1, Samduk 2Ga, Jung-Gu, Daegu 700-412 (Korea, Republic of); Tustusmi, Yusuke [Department of Metals, Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental Univeristy, Tokyo 101-0062 (Japan); Lee, Chong Soo; Park, Chan Hee [Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of); Kim, Youn-Jeong; Jang, Je-Hee [Department of Periodontology, School of Dentistry, Kyungpook National University, 188-1, Samduk 2Ga, Jung-Gu, Daegu 700-412 (Korea, Republic of); Khang, Dongwoo; Im, Yeon-Min [School of Materials Science and Engineering, Gyeongsang National University, Jinju 600-701 (Korea, Republic of); Doi, Hisashi; Nomura, Naoyuki; Hanawa, Takao [Department of Metals, Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental Univeristy, Tokyo 101-0062 (Japan)

2011-06-15

This study investigated the surface characteristics and in vitro biocompatibility of a titanium (Ti) oxide layer incorporating calcium ions (Ca) obtained by hydrothermal treatment with or without post heat-treatment in the Ti-13Nb-13Zr alloy. The surface characteristics were evaluated by scanning electron microscopy, thin-film X-ray diffractometry, X-ray photoelectron spectroscopy, atomic force microscopy and contact angle measurements. In vitro biocompatibility of the Ca-containing surfaces was assessed in comparison with untreated surfaces using a pre-osteoblast cell line. Hydrothermal treatment produced a crystalline CaTiO{sub 3} layer. Post heat-treatment at 400 deg. C for 2 h in air significantly decreased water contact angles in the CaTiO{sub 3} layer (p < 0.001). The Ca-incorporated alloy surfaces displayed markedly increased cell viability and ALP activity compared with untreated surfaces (p < 0.001), and also an upregulated expression of various integrin genes ({alpha}1, {alpha}2, {alpha}5, {alpha}v, {beta}1 and {beta}3) at an early incubation time-point. Post heat-treatment further increased attachment and ALP activity in cells grown on Ca-incorporated Ti-13Nb-13Zr alloy surfaces. The results indicate that the Ca-incorporated oxide layer produced by hydrothermal treatment and a simple post heat-treatment may be effective in improving bone healing in Ti-13Nb-13Zr alloy implants by enhancing the viability and differentiation of osteoblastic cells.

Produced Water Reuse Considerations for In-Situ Recovery: a Case Development

Energy Technology Data Exchange (ETDEWEB)

Kus, J.; Card, R.

1984-01-01

Steam-assisted methods for in-situ recovery in Canada typically operate at steam to oil ratios of approximately 3 to 1 and generate in the order of 2 to 5 barrels of produced water per barrel of production. To raise the large quantities of steam required for reservoir stimulation, once-through type steam generators are most commonly used. They are typically designed to produce about 80 per cent quality steam from soft, oil-free feedwater. Suncor Inc operates a cyclic steam injection pilot project near Fort Kent, Alberta. In the early 1980s, Suncor planned an expansion of the 180 m/sup 3//d (1,130 bbl/d) facility to 800 m/sup 3//d (5,000 bbl/d). The expansion necessitated the development of a reliable water supply. Preliminary investigations into the feasibility of reusing produced water as the sole source of supply for the project expansion revealed this to be a costly and technically high risk option, given the specific produced water characteristics. As a result, an innovative alternative was developed to use a blend of produced water and municipal effluent from a nearby town as the water supply. This paper presents the rationale for the selection of this unique water supply and the process design considerations for the resulting water treatment system.

Volatile compounds of Aspergillus strains with different abilities to produce ochratoxin A.

Science.gov (United States)

Jeleń, Henryk H; Grabarkiewicz-Szczesna, Jadwiga

2005-03-09

Volatile compounds emitted by Aspergillus strains having different abilities to produce ochratoxin A were investigated. Thirteen strains of Aspergillus ochraceus, three belonging to the A. ochraceus group, and eight other species of Aspergillus were examined for their abilities to produce volatile compounds and ochratoxin A on a wheat grain medium. The profiles of volatile compounds, analyzed using SPME, in all A. ochraceus strains, regardless of their toxeginicity, were similar and comprised mainly of 1-octen-3-ol, 3-octanone, 3-octanol, 3-methyl-1-butanol, 1-octene, and limonene. The prevailing compound was always 1-octen-3-ol. Mellein, which forms part of the ochratoxin A molecule, was found in both toxigenic and nontoxigenic strains. Volatile compounds produced by other Aspergillus strains were similar to those of A. ochraceus. Incubation temperatures (20, 24, and 27 degrees C) and water content in the medium (20, 30, and 40%) influenced both volatile compounds formation and ochratoxin A biosynthesis efficiency, although conditions providing the maximum amount of volatiles were different from those providing the maximum amount of ochratoxin A. The pattern of volatiles produced by toxigenic A. ochraceus strains does not facilitate their differentiation from nontoxigenic strains.

Aflatoxins produced by Aspergillus nomius ASR3, a pathogen isolated from the leaf-cutter ant Atta sexdens rubropilosa

Directory of Open Access Journals (Sweden)

Eduardo Afonso da Silva-Junior

Full Text Available ABSTRACT Aspergillus spp. cause economic impacts due to aflatoxins production. Although the toxicity of aflatoxins is already known, little information about their ecological roles is available. Here we investigated the compounds produced by Aspergillus nomius ASR3 directly from a dead leaf-cutter queen ant Atta sexdens rubropilosa and the fungal axenic culture. Chemical analyses were carried out by high-resolution mass spectrometry and tandem mass spectrometry techniques. Aflatoxins B1 and G1 were detected in both the axenic culture and in the dead leaf-cutter queen ant. The presence of these mycotoxins in the dead leaf-cutter queen ant suggests that these compounds can be related to the insect pathogenicity of A. nomius against A. sexdens rubropilosa.

Marketing advisors and their role for junior gas producers

Energy Technology Data Exchange (ETDEWEB)

Maffitt, D.W. [Phoenix Gas Marketing Consultants Inc., Calgary, AB (Canada)

1997-05-01

The role of marketing advisors in the new deregulated natural gas industry was discussed. These producer-oriented marketing consultants are specialists in providing affordable marketing services to junior gas producers on an `as-needed` basis. The most important service provided by marketing advisors is helping the client identify management problems, analyze such problems and recommend solutions. Accordingly, the marketing advisor should be independent and objective, with no conflict of interests. He/she should be prepared to invest a lot of time and effort in providing the junior producer with a customized diagnosis of its marketing problems. 5 refs., 3 figs.

Marketing advisors and their role for junior gas producers

International Nuclear Information System (INIS)

Maffitt, D.W.

1997-01-01

The role of marketing advisors in the new deregulated natural gas industry was discussed. These producer-oriented marketing consultants are specialists in providing affordable marketing services to junior gas producers on an 'as-needed' basis. The most important service provided by marketing advisors is helping the client identify management problems, analyze such problems and recommend solutions. Accordingly, the marketing advisor should be independent and objective, with no conflict of interests. He/she should be prepared to invest a lot of time and effort in providing the junior producer with a customized diagnosis of its marketing problems. 5 refs., 3 figs

78 FR 62946 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Science.gov (United States)

2013-10-22

... significant foreign narcotics traffickers as identified by the President. In addition, the Secretary of the...; R.F.C. PAPA751109870 (Mexico); C.U.R.P. PAPA751109HNEDSL04 (Mexico) (individual) [SDNTK] (Linked To... No. 279, Supermanzana 50, Manzana 14, Lote 17, Residencial San Angel, Cancun, Quintana Roo, Mexico...

78 FR 3083 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Science.gov (United States)

2013-01-15

... identified by the President. In addition, the Secretary of the Treasury, in consultation with the Attorney... 80220, Mexico; Calle Escobedo No. 24, Localidad El Dorado, Culiacan, Sinaloa 80450, Mexico; DOB 22 Feb 1966; POB Culiacan, Sinaloa, Mexico; nationality Mexico; citizen Mexico; R.F.C. LOND6602221Y5 (Mexico...

78 FR 47828 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Science.gov (United States)

2013-08-06

... significant foreign narcotics traffickers as identified by the President. In addition, the Secretary of the..., Colonia Centro, Culiacan, Sinaloa 80000, Mexico; DOB 21 Dec 1941; POB Sinaloa, Mexico; nationality Mexico; citizen Mexico; R.F.C. NUBA411221867 (Mexico); C.U.R.P. NUBA411221HSLXDN05 (Mexico) (individual) [SDNTK...

A highly active PtCu3 intermetallic core-shell, multilayered Pt-skin, carbon embedded electrocatalyst produced by a scale-up sol-gel synthesis.

Science.gov (United States)

Bele, M; Jovanovič, P; Pavlišič, A; Jozinović, B; Zorko, M; Rečnik, A; Chernyshova, E; Hočevar, S; Hodnik, N; Gaberšček, M

2014-11-07

We present a novel, scaled-up sol-gel synthesis which enables one to produce 20 g batches of highly active and stable carbon supported PtCu3 nanoparticles as cathode materials for low temperature fuel cell application. We confirm the presence of an ordered intermetallic phase underneath a multilayered Pt-skin together with firm embedment of nanoparticles in the carbon matrix.

Isolation of biosurfactant producers, optimization and properties of biosurfactant produced by Acinetobacter sp. from petroleum-contaminated soil.

Science.gov (United States)

Chen, J; Huang, P T; Zhang, K Y; Ding, F R

2012-04-01

To screen and identify biosurfactant producers from petroleum-contaminated soil; to use response surface methodology (RSM) for medium optimization to enhance biosurfactant production; and to study the properties of the newly obtained biosurfactant towards pH, temperature and salinity. We successfully isolated three biosurfactant producers from petroleum-contaminated soil and identified them through 16S rRNA sequence analysis, which exhibit the highest similarities to Acinetobacter beijerinckii (100%), Kocuria marina (99%) and Kineococcus marinus (99%), respectively. A quadratic response model was constructed through RSM designs, leading to a 57·5% increase of the growth-associated biosurfactant production by Acinetobacter sp. YC-X 2 with an optimized medium: beef extract 3·12 g l(-1) ; peptone 20·87 g l(-1) ; NaCl 1·04 g l(-1); and n-hexadecane 1·86 g l(-1). Biosurfactant produced by Acinetobacter sp. YC-X 2 retained its properties during exposure to a wide range of pH values (5-11), high temperatures (up to 121°C) and high salinities [up to 18% (w/v) Na(+) and Ca(2+) ], which was more sensitive to Ca(2+) than Na(+). Two novel biosurfactant producers were isolated from petroleum-contaminated soil. Biosurfactant from Acinetobacter sp. YC-X 2 has good properties to a wide range of pH, high temperature and high salinity, and its production was optimized successfully through RSM. The fact, an increasing demand of high-quality surfactants and the lack of cost-competitive bioprocesses of biosurfactants for commercial utilization, motivates researchers to develop cost-effective strategies for biosurfactant production through isolating new biosurfactant producers with special surface-active properties and optimizing their cultural conditions. Two novel biosurfactant producers in this study will widen our knowledge about this kind of micro-organism. This work is the first application of RSM designs for cultural optimization of biosurfactant produced by Acinetobacter

Interaction of Proliferating Cell Nuclear Antigen With DNA at the Single Molecule Level

KAUST Repository

Raducanu, Vlad-Stefan

2016-05-01

Proliferating cell nuclear antigen (PCNA) is a key factor involved in Eukaryotic DNA replication and repair, as well as other cellular pathways. Its importance comes mainly from two aspects: the large numbers of interacting partners and the mechanism of facilitated diffusion along the DNA. The large numbers of interacting partners makes PCNA a necessary factor to consider when studying DNA replication, either in vitro or in vivo. The mechanism of facilitated diffusion along the DNA, i.e. sliding along the duplex, reduces the six degrees of freedom of the molecule, three degrees of freedom of translation and three degrees of freedom of rotation, to only two, translation along the duplex and rotational tracking of the helix. Through this mechanism PCNA can recruit its partner proteins and localize them to the right spot on the DNA, maybe in the right spatial orientation, more effectively and in coordination with other proteins. Passive loading of the closed PCNA ring on the DNA without free ends is a topologically forbidden process. Replication factor C (RFC) uses energy of ATP hydrolysis to mechanically open the PCNA ring and load it on the dsDNA. The first half of the introduction gives overview of PCNA and RFC and the loading mechanism of PCNA on dsDNA. The second half is dedicated to a diffusion model and to an algorithm for analyzing PCNA sliding. PCNA and RFC were successfully purified, simulations and a mean squared displacement analysis algorithm were run and showed good stability and experimental PCNA sliding data was analyzed and led to parameters similar to the ones in literature.

Redox biology in normal cells and cancer: restoring function of the redox/Fyn/c-Cbl pathway in cancer cells offers new approaches to cancer treatment.

Science.gov (United States)

Noble, Mark; Mayer-Pröschel, Margot; Li, Zaibo; Dong, Tiefei; Cui, Wanchang; Pröschel, Christoph; Ambeskovic, Ibro; Dietrich, Joerg; Han, Ruolan; Yang, Yin Miranda; Folts, Christopher; Stripay, Jennifer; Chen, Hsing-Yu; Stevens, Brett M

2015-02-01

This review discusses a unique discovery path starting with novel findings on redox regulation of precursor cell and signaling pathway function and identification of a new mechanism by which relatively small changes in redox status can control entire signaling networks that regulate self-renewal, differentiation, and survival. The pathway central to this work, the redox/Fyn/c-Cbl (RFC) pathway, converts small increases in oxidative status to pan-activation of the c-Cbl ubiquitin ligase, which controls multiple receptors and other proteins of central importance in precursor cell and cancer cell function. Integration of work on the RFC pathway with attempts to understand how treatment with systemic chemotherapy causes neurological problems led to the discovery that glioblastomas (GBMs) and basal-like breast cancers (BLBCs) inhibit c-Cbl function through altered utilization of the cytoskeletal regulators Cool-1/βpix and Cdc42, respectively. Inhibition of these proteins to restore normal c-Cbl function suppresses cancer cell division, increases sensitivity to chemotherapy, disrupts tumor-initiating cell (TIC) activity in GBMs and BLBCs, controls multiple critical TIC regulators, and also allows targeting of non-TICs. Moreover, these manipulations do not increase chemosensitivity or suppress division of nontransformed cells. Restoration of normal c-Cbl function also allows more effective harnessing of estrogen receptor-α (ERα)-independent activities of tamoxifen to activate the RFC pathway and target ERα-negative cancer cells. Our work thus provides a discovery strategy that reveals mechanisms and therapeutic targets that cannot be deduced by standard genetics analyses, which fail to reveal the metabolic information, isoform shifts, protein activation, protein complexes, and protein degradation critical to our discoveries. Copyright © 2015. Published by Elsevier Inc.

Production, Purification, and Identification of Cholest-4-en-3-one Produced by Cholesterol Oxidase from sp. in Aqueous/Organic Biphasic System

Directory of Open Access Journals (Sweden)

Ke Wu

2015-01-01

Full Text Available Cholest-4-en-3-one has positive uses against obesity, liver disease, and keratinization. It can be applied in the synthesis of steroid drugs as well. Most related studies are focused on preparation of cholest-4-en-3-one by using whole cells as catalysts, but production of high-quality cholest-4-en-3-one directly from cholesterol oxidase (COD using an aqueous/organic two-phase system has been rarely explored. This study set up an enzymatic reaction system to produce cholest-4-en-3-one. We developed and optimized the enzymatic reaction system using COD from COX5-6 (a strain of Rhodococcus instead of whole-cell biocatalyst. This not only simplifies and accelerates the production but also benefits the subsequent separation and purification process. Through extraction, washing, evaporation, column chromatography, and recrystallization, we got cholest-4-en-3-one with purity of 99.78%, which was identified by nuclear magnetic resonance, mass spectroscopy, and infrared spectroscopy. In addition, this optimized process of cholest-4-en-3-one production and purification can be easily scaled up for industrial production, which can largely decrease the cost and guarantee the purity of the product.

Uses of laser optical pumping to produce polarized ion beams

International Nuclear Information System (INIS)

Anderson, L.W.

1983-01-01

Laser optical pumping can be used to produce polarized alkali atom beams or polarized alkali vapor targets. Polarized alkali atom beams can be converted into polarized alkali ion beams, and polarized alkali vapor targets can be used to produce polarized H - or 3 He - ion beams. In this paper the authors discuss how the polarized alkali atom beams and polarized alkali vapor targets are used to produce polarized ion beams with emphasis on the production of polarized negative ion beams

Some chemical properties of nisin produced by lactococcus lactis

International Nuclear Information System (INIS)

Hussein, H.; Abdel Karem, H.; El-Hadedy, D.; Badr, S.

2010-01-01

The present study was carried out to study the properties of nisin produced by lactococcus lactis FG 2 isolated from local un fated cheese. The maximum anti-microbial effect of pure nisin was occurred at ph 6 and 7. Nisin was heat stable from 40 to 90 degree C for 30 min. Molecular weight of nisin was determined by SDS-PAGE, it was 3.0 kDa and after irradiated the microbial cells to 1.5 kGy dose level the molecular weight increased to 3.5 t kDa then decreased at 2 kGy . Storage for two weeks it appeared in dimmer means and had a molecular weight 7 kDa . Using amino acid analyzer reveled that nisin contained a majority of nonpolar amino acids and exhibited cystine in composition . Nisin produced in whey have higher activity than nisin produced in MRS medium but both had the same structure. The results proved that nisin gene is in coded in chromosome and not with plasmid.

SHEARING STRENGTH TEST OF ORTOPEDIC TITANIUM ALLOY SCREW PRODUCED IN THE PROCESS OF 3D TECHNOLOGY PRINTING

Directory of Open Access Journals (Sweden)

Patrycja Ruszniak

2016-03-01

Full Text Available The aim of the present dissertation is the assessment of technical shear resistance (technological shear of orthopedic screw made of titanium alloy Ti6Al4V, produced using incremental technology in the process of 3D printing process. The first part of the work presents incremental techniques in production engineering. The second part of the present work contains specification of the 3D printing process of samples as well as the description of the used material. The fundamental part of the article is composed out of endurance tests for orthopaedic screws as well as the analysis of the obtained results and conclusions. The method of incremental production SLM using SLM 280HL metal printer was used during the technological process. The resistance tests were performed using ZWICK/ROELL Z150 machines. Identical endurance trials were performed for monolithic bars made of titanium alloys (of bar core size made on a wire electric discharge machine Sodick SL600Q for comparative purposes. The obtained test results enabled comparative assessment of the value of shear resistance Rt in the conditions of technological shear. According to the performed tests, the shear resistance Rt of orthopaedic screws is nearly 33% lower than of monolithic bars of the same core size.

Organic metabolites produced by Vibrio parahaemolyticus strain ...

African Journals Online (AJOL)

Identification and action of several antibacterial metabolites produced by a fish pathogen Vibrio parahaemolyticus strain An3 from marine ecosystem of Goa has been demonstrated. Antibacterial activity of the crude cell extract of the test bacterium has been evaluated against indicator pathogenic bacterial strains such as ...

Host cells and methods for producing diacid compounds

Energy Technology Data Exchange (ETDEWEB)

Steen, Eric J.; Fortman, Jeffrey L.; Dietrich, Jeffrey A.; Keasling, Jay D.

2018-04-24

The present invention provides for a method of producing one or more fatty acid derived dicarboxylic acids in a genetically modified host cell which does not naturally produce the one or more derived fatty acid derived dicarboxylic acids. The invention provides for the biosynthesis of dicarboxylic acid ranging in length from C3 to C26. The host cell can be further modified to increase fatty acid production or export of the desired fatty acid derived compound, and/or decrease fatty acid storage or metabolism.

Dominance of IMP-4-Producing Enterobacter cloacae among Carbapenemase-Producing Enterobacteriaceae in Australia

Science.gov (United States)

Townell, Nicola; Nimmo, Graeme R.; George, Narelle M.; Robson, Jennifer; Vohra, Renu; Davis, Louise; Heney, Claire; Paterson, David L.

2015-01-01

The prevalence of carbapenemase-producing Enterobacteriaceae (CPE) has been increasing worldwide. blaIMP has been reported to be the predominant carbapenemase-encoding gene within Enterobacteriaceae in Australia. However, there are limited data currently available on CPE from Queensland, Australia. A total of 58 CPE isolates were isolated between July 2009 and March 2014 from Queensland hospitals. The clonality of isolates was determined by Diversilab repetitive sequence-based PCR. The isolates were investigated for the resistance mechanisms carbapenemase, extended-spectrum β-lactamase, and AmpC β-lactamase and for aminoglycoside resistance and plasmid-mediated quinolone resistance genes by PCR. The plasmid types associated with carbapenemase-encoding genes were characterized. The majority of the CPE were Enterobacter cloacae (n = 29). The majority of Queensland CPE isolates were IMP producers and comprised 11 species (n = 48). Nine NDM-producing Enterobacteriaceae were identified. One NDM-producing Klebsiella pneumoniae isolate coproduced OXA-48. One K. pneumoniae isolate was an OXA-181 producer. The incidence of IMP producers increased significantly in 2013. blaIMP-4 was found in all IMP-producing isolates. blaTEM, qnrB, and aacA4 were common among IMP-4 producers. The HI2 (67%) and L/M (21%) replicons were associated with blaIMP-4. All HI2 plasmids were of sequence type 1 (ST1). All but one of the NDM producers possessed blaCTX-M-15. The 16S rRNA methylase genes found among NDM producers were armA, rmtB, rmtC, and rmtF. The substantial increase in the prevalence of CPE in Queensland has been associated mainly with the emergence E. cloacae strains possessing HI2 plasmids carrying blaIMP-4 over the past 2 years. The importation of NDM producers and/or OXA-48-like producers in patients also contributed to the increased emergence of CPE. PMID:25918153

7 CFR 1033.71 - Payments to the producer-settlement fund.

Science.gov (United States)

2010-01-01

....44(c) by the producer price differential as adjusted pursuant to § 1033.75; (2) An amount obtained by..., other solids, and butterfat prices, respectively; (3) The total value of the somatic cell adjustment to producer milk; and (4) An amount obtained by multiplying the pounds of skim milk and butterfat for which a...

7 CFR 1126.71 - Payments to the producer-settlement fund.

Science.gov (United States)

2010-01-01

....44(c) by the producer price differential as adjusted pursuant to § 1126.75; (2) An amount obtained by..., other solids, and butterfat prices respectively; (3) The total value of the somatic cell adjustment to producer milk; and (4) An amount obtained by multiplying the pounds of skim milk and butterfat for which a...

7 CFR 1124.71 - Payments to the producer-settlement fund.

Science.gov (United States)

2010-01-01

..., other solids, and butterfat prices respectively; and (3) An amount obtained by multiplying the pounds of skim milk and butterfat for which a value was computed pursuant to § 1124.60(h) by the producer price....44(c) by the producer price differential as adjusted pursuant to § 1124.75; (2) An amount obtained by...

7 CFR 1032.71 - Payments to the producer-settlement fund.

Science.gov (United States)

2010-01-01

....44(c) by the producer price differential as adjusted pursuant to § 1032.75; (2) An amount obtained by..., other solids, and butterfat prices respectively; (3) The total value of the somatic cell adjustment to producer milk; and (4) An amount obtained by multiplying the pounds of skim milk and butterfat for which a...

7 CFR 1030.71 - Payments to the producer-settlement fund.

Science.gov (United States)

2010-01-01

....44(c) by the producer price differential as adjusted pursuant to § 1030.75; (2) An amount obtained by..., other solids, and butterfat prices respectively; (3) The total value of the somatic cell adjustment to producer milk; and (4) An amount obtained by multiplying the pounds of skim milk and butterfat for which a...

Produced water radionuclide hazard/risk assessment, Phase 1

Energy Technology Data Exchange (ETDEWEB)

Hamilton, L.D.; Meinhold, A.F.; Nagy, J.

1991-06-01

Petroleum production may be accompanied by the production of saline water, called produced water.'' Produced water discharged into freshwater streams, estuaries, coastal and outer continental shelf waters can contained enhanced levels of radium isotopes. This document reports on the first phase of a study to estimate the risk to human health and the environment from radium discharged in produced water. The study involved five major steps: (1) evaluate the usefulness of available produced water outfall data for developing estimates of radium environmental concentrations; (2) review the literature on the bioaccumulation of radium by aquatic organism; (3) review the literature on the effects of radiation on aquatic organisms; (4) review the information available concerning the human health risks associated with exposure to Ra-226 and Ra-228 and (5) perform a conservative, screening-level assessment of the health and environmental risks posed by Ra-226 and Ra-228 discharged in produced waters. A screening-level analysis was performed to determine whether radium discharged to coastal Louisiana in produced waters presents potential health or environmental risks requiring further study. This conservative assessment suggested that no detectable impact on populations of fish, molluscs or crustaceans from radium discharged in produced waters is likely. The analysis also suggested that there is a potential for risk were an individual to ingest a large amount of seafood harvested near a produced water discharge point over a lifetime. The number of excess cancers predicted per year under a conservative scenario is comparable to those expected to result from background concentrations of radium.

Produced water radionuclide hazard/risk assessment, Phase 1

Energy Technology Data Exchange (ETDEWEB)

Hamilton, L.D.; Meinhold, A.F.; Nagy, J.

1991-06-01

Petroleum production may be accompanied by the production of saline water, called ``produced water.`` Produced water discharged into freshwater streams, estuaries, coastal and outer continental shelf waters can contained enhanced levels of radium isotopes. This document reports on the first phase of a study to estimate the risk to human health and the environment from radium discharged in produced water. The study involved five major steps: (1) evaluate the usefulness of available produced water outfall data for developing estimates of radium environmental concentrations; (2) review the literature on the bioaccumulation of radium by aquatic organism; (3) review the literature on the effects of radiation on aquatic organisms; (4) review the information available concerning the human health risks associated with exposure to Ra-226 and Ra-228 and (5) perform a conservative, screening-level assessment of the health and environmental risks posed by Ra-226 and Ra-228 discharged in produced waters. A screening-level analysis was performed to determine whether radium discharged to coastal Louisiana in produced waters presents potential health or environmental risks requiring further study. This conservative assessment suggested that no detectable impact on populations of fish, molluscs or crustaceans from radium discharged in produced waters is likely. The analysis also suggested that there is a potential for risk were an individual to ingest a large amount of seafood harvested near a produced water discharge point over a lifetime. The number of excess cancers predicted per year under a conservative scenario is comparable to those expected to result from background concentrations of radium.

Produced water radionuclide hazard/risk assessment, Phase 1

International Nuclear Information System (INIS)

Hamilton, L.D.; Meinhold, A.F.; Nagy, J.

1991-06-01

Petroleum production may be accompanied by the production of saline water, called ''produced water.'' Produced water discharged into freshwater streams, estuaries, coastal and outer continental shelf waters can contained enhanced levels of radium isotopes. This document reports on the first phase of a study to estimate the risk to human health and the environment from radium discharged in produced water. The study involved five major steps: (1) evaluate the usefulness of available produced water outfall data for developing estimates of radium environmental concentrations; (2) review the literature on the bioaccumulation of radium by aquatic organism; (3) review the literature on the effects of radiation on aquatic organisms; (4) review the information available concerning the human health risks associated with exposure to Ra-226 and Ra-228 and (5) perform a conservative, screening-level assessment of the health and environmental risks posed by Ra-226 and Ra-228 discharged in produced waters. A screening-level analysis was performed to determine whether radium discharged to coastal Louisiana in produced waters presents potential health or environmental risks requiring further study. This conservative assessment suggested that no detectable impact on populations of fish, molluscs or crustaceans from radium discharged in produced waters is likely. The analysis also suggested that there is a potential for risk were an individual to ingest a large amount of seafood harvested near a produced water discharge point over a lifetime. The number of excess cancers predicted per year under a conservative scenario is comparable to those expected to result from background concentrations of radium

A novel cholesterol-producing Pichia pastoris strain is an ideal host for functional expression of human Na,K-ATPase α3β1 isoform.

Science.gov (United States)

Hirz, Melanie; Richter, Gerald; Leitner, Erich; Wriessnegger, Tamara; Pichler, Harald

2013-11-01

The heterologous expression of mammalian membrane proteins in lower eukaryotes is often hampered by aberrant protein localization, structure, and function, leading to enhanced degradation and, thus, low expression levels. Substantial quantities of functional membrane proteins are necessary to elucidate their structure-function relationships. Na,K-ATPases are integral, human membrane proteins that specifically interact with cholesterol and phospholipids, ensuring protein stability and enhancing ion transport activity. In this study, we present a Pichia pastoris strain which was engineered in its sterol pathway towards the synthesis of cholesterol instead of ergosterol to foster the functional expression of human membrane proteins. Western blot analyses revealed that cholesterol-producing yeast formed enhanced and stable levels of human Na,K-ATPase α3β1 isoform. ATPase activity assays suggested that this Na,K-ATPase isoform was functionally expressed in the plasma membrane. Moreover, [(3)H]-ouabain cell surface-binding studies underscored that the Na,K-ATPase was present in high numbers at the cell surface, surpassing reported expression strains severalfold. This provides evidence that the humanized sterol composition positively influenced Na,K-ATPase α3β1 stability, activity, and localization to the yeast plasma membrane. Prospectively, cholesterol-producing yeast will have high potential for functional expression of many mammalian membrane proteins.

Interleucina 1β correlaciona-se com MIBG e parâmetros do exercício, na insuficiência cardíaca?

Directory of Open Access Journals (Sweden)

Leandro Rocha Messias

2013-05-01

Full Text Available FUNDAMENTO: Na insuficiência cardíaca, níveis de interleucina 1β (IL 1β se associam a prognóstico. A atividade adrenérgica cardíaca avaliada através da cintilografia com metiodobenzilguanidina (I123 MIBG e parâmetros do exercício são importantes preditores de prognóstico. A relação entre essas variáveis não está bem definida. OBJETIVO: Avaliar associação entre níveis de IL 1β com parâmetros do exercício e do I123 MIBG. MÉTODOS: Estudo observacional transversal, com avaliação de 25 pacientes consecutivos com insuficiência cardíaca e fração de ejeção menor que 45%, através de: dosagem de IL 1β; parâmetros do I123 MIBG [relação coração/mediastino precoce e tardia, taxa de washout (WO]; e teste ergométrico em esteira pelo protocolo de Rampa. RESULTADOS: Separados em dois grupos pelos níveis de IL 1β (normal vs. elevado, o grupo com níveis aumentados apresentava menor reserva de duplo produto (RDP, menor capacidade funcional (CF e recuperação mais lenta da frequência cardíaca no 1º (RFC 1º e 2º minuto (RFC 2º, e maior WO. Na análise univariada, todas as variáveis se correlacionaram com a IL 1β; RDP: r = 0,203, p = 0,024; CF: r = 0,181, p = 0,034; RFC 1º: r = 0,182, p = 0,034; RFC 2º: r = 0,204, p = 0,023; WO: r = 0,263, p = 0,009. Na multivariada, apenas a WO permaneceu com correlação significativa (r2 = 0,263, p = 0,009. CONCLUSÃO: A hipertonia adrenérgica foi o principal determinante dos níveis de IL 1β, demonstrando que a atividade simpática excessiva influencia a atividade inflamatória sistêmica. As variáveis do teste ergométrico não foram capazes de identificar pacientes com níveis elevados de IL 1β.

Produção forrageira e composição bromatológica de combinações genômicas de capim-elefante e milheto Fodder production and bromatological composition of genomic combinations in elephant grass and pearl millet

Directory of Open Access Journals (Sweden)

Fernando Ferreira Leão

2012-06-01

Full Text Available Objetivou-se com este trabalho, avaliar o comportamento agronômico de combinações genômicas oriundas do cruzamento entre capim-elefante (Pennisetum purpureum Schum. e milheto (Pennisetum glaucum (E. Leek, visando determinar o potencial de Pennisetum glaucum para o melhoramento da qualidade forrageira do capim-elefante. Três cultivares de capim-elefante e 11 combinações genômicas foram avaliadas para produção de matéria verde total (PMV, produção de matéria seca total (PMS, percentagem de matéria seca (%MS, produção de matéria seca de folhas (PMSF, produção de matéria seca de caule (PMSC, relação caule/folha (RFC, altura (ALT, vigor fenotípico (VF, número de perfilhos (NP, fibra em detergente ácido (FDA, fibra em detergente neutro (FDN, proteína bruta (PB e digestibilidade in vitro de matéria seca (DIVMS. Excetuando RFC e NP, todas as demais características apresentaram diferenças significativas para os genótipos (p The objective of this work was to evaluate the agronomic performance of genomic combinations from elephant grass (Pennisetum purpureum Schum. and pearl millet (Pennisetum glaucum (E. Leek, in order to determine the Pennisetum glaucum potencial as a germoplasm for elephant grass improvement. Three cultivars and eleven genomic combinations were evaluated for fresh forage production (PMV, total dry matter production (PMS, dry matter ratio (%MS, leaves dry matter production (PMSF, stem dry matter production (PMSC, leaf/stem ratio (RFC, height (ALT, plant vigor (VF, number of tillers (NP, acid detergent fiber ratio (FDA, Neutral detergent fiber ratio (FDN, crude protein ratio (PB and in vitro dry matter digestibility (DIVMS. All characteristics, except for RFC and NP, showed significant difference for genotypes (p < 0.05, point out to the genetic variability among the evaluated genotypes. As to forage dry matter production, the HCM-5x-2 genomic combination outstood the pentaploids while the HCM-4x-2 outstood

Producing charcoal from wastes

Energy Technology Data Exchange (ETDEWEB)

Pogorelov, V.A.

1983-01-01

Experimental works to use wood wastes for producing charcoal are examined, which are being conducted in the Sverdlovsk assembly and adjustment administration of Soyuzorglestekhmontazh. A wasteless prototype installation for producing fine charcoal is described, along with its subsequent briqueting, which is made on the basis of units which are series produced by the factories of the country. The installation includes subassemblies for preparing and drying the raw material and for producing the charcoal briquets. In the opinion of specialists, the charcoal produced from the wastes may be effectively used in ferrous and nonferrous metallurgy and in the production of pipes.

Involvement of indole-3-acetic acid produced by Azospirillum brasilense in accumulating intracellular ammonium in Chlorella vulgaris.

Science.gov (United States)

Meza, Beatriz; de-Bashan, Luz E; Bashan, Yoav

2015-01-01

Accumulation of intracellular ammonium and activities of the enzymes glutamine synthetase (GS) and glutamate dehydrogenase (GDH) were measured when the microalgae Chlorella vulgaris was immobilized in alginate with either of two wild type strains of Azospirillum brasilense or their corresponding indole-3-acetic acid (IAA)-attenuated mutants. After 48 h of immobilization, both wild types induced higher levels of intracellular ammonium in the microalgae than their respective mutants; the more IAA produced, the higher the intracellular ammonium accumulated. Accumulation of intracellular ammonium in the cells of C. vulgaris followed application of four levels of exogenous IAA reported for A. brasilense and its IAA-attenuated mutants, which had a similar pattern for the first 24 h. This effect was transient and disappeared after 48 h of incubation. Immobilization of C. vulgaris with any bacteria strain induced higher GS activity. The bacterial strains also had GS activity, comparable to the activity detected in C. vulgaris, but weaker than when immobilized with the bacteria. When net activity was calculated, the wild type always induced higher GS activity than IAA-attenuated mutants. GDH activity in most microalgae/bacteria interactions resembled GS activity. When complementing IAA-attenuated mutants with exogenous IAA, GS activity in co-immobilized cultures matched those of the wild type A. brasilense immobilized with the microalga. Similarity occurred when the net GS activity was measured, and was higher with greater quantities of exogenous IAA. It is proposed that IAA produced by A. brasilense is involved in ammonium uptake and later assimilation by C. vulgaris. Copyright © 2014 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

Effects of electromagnetic radiation produced by 3G mobile phones on rat brains: magnetic resonance spectroscopy, biochemical, and histopathological evaluation.

Science.gov (United States)

Dogan, M; Turtay, M G; Oguzturk, H; Samdanci, E; Turkoz, Y; Tasdemir, S; Alkan, A; Bakir, S

2012-06-01

The effects of electromagnetic radiation (EMR) produced by a third-generation (3G) mobile phone (MP) on rat brain tissues were investigated in terms of magnetic resonance spectroscopy (MRS), biochemistry, and histopathological evaluations. The rats were randomly assigned to two groups: Group 1 is composed of 3G-EMR-exposed rats (n = 9) and Group 2 is the control group (n = 9). The first group was subjected to EMR for 20 days. The control group was not exposed to EMR. Choline (Cho), creatinin (Cr), and N-acetylaspartate (NAA) levels were evaluated by MRS. Catalase (CAT) and glutathione peroxidase (GSH-Px) enzyme activities were measured by spectrophotometric method. Histopathological analyses were carried out to evaluate apoptosis in the brain tissues of both groups. In MRS, NAA/Cr, Cho/Cr, and NAA/Cho ratios were not significantly different between Groups 1 and 2. Neither the oxidative stress parameters, CAT and GSH-Px, nor the number of apoptotic cells were significantly different between Groups 1 and 2. Usage of short-term 3G MP does not seem to have a harmful effect on rat brain tissue.

40 CFR Appendix A to Subpart Ddddd... - Methodology and Criteria for Demonstrating Eligibility for the Health-Based Compliance Alternatives

Science.gov (United States)

2010-07-01

....0 at locations where people live or congregate (e.g., schools, daycare centers, etc.); (d) Your... your HQ values for manganese are greater than 1.0 at locations where people live or congregate (e.g... conducted including collection and analytical methods used. (4) Identification of the RfC values used in...

76 FR 56263 - Titles II and XVI: Documenting and Evaluating Disability in Young Adults

Science.gov (United States)

2011-09-12

... have the RFC to adjust to other work that exists in significant numbers in the national economy... develop math, sequencing, travel, and social skills). On-the-job training (OJT), or placement in various... work that exists in significant numbers in the national economy, we do not consider whether he or she...

User community vs. producer innovation development efficiency

DEFF Research Database (Denmark)

Hienerth, Christoph; von Hippel, Eric; Jensen, Morten Berg

2014-01-01

In this paper we report upon a first empirical exploration of the relative efficiency of innovation development by product users vs. product producers. In a study of over 50 years of product innovation in the whitewater kayaking field, we find users in aggregate were approximately 3× more efficie...

Decarbonization process for carbothermically produced aluminum

Science.gov (United States)

Bruno, Marshall J.; Carkin, Gerald E.; DeYoung, David H.; Dunlap, Sr., Ronald M.

2015-06-30

A method of recovering aluminum is provided. An alloy melt having Al.sub.4C.sub.3 and aluminum is provided. This mixture is cooled and then a sufficient amount of a finely dispersed gas is added to the alloy melt at a temperature of about 700.degree. C. to about 900.degree. C. The aluminum recovered is a decarbonized carbothermically produced aluminum where the step of adding a sufficient amount of the finely dispersed gas effects separation of the aluminum from the Al.sub.4C.sub.3 precipitates by flotation, resulting in two phases with the Al.sub.4C.sub.3 precipitates being the upper layer and the decarbonized aluminum being the lower layer. The aluminum is then recovered from the Al.sub.4C.sub.3 precipitates through decanting.

First-Principles Calculations for Chemical Reaction between Sodium Diethyldithiocarbamate and Transition-Metal (Cr) atom to Produce Cr(DDC)3 and Cr(DDC)2ODDC

Science.gov (United States)

Setiyanto, Henry; Muhida, Rifki; Kishi, Tomoya; Rempillo, Ofelia; Rahman, Mahmudur; Dipojono, Hermawan Kresno; Di\\ {n}o, Wilson Agerico; Matsumoto, Shigeno; Kasai, Hideaki

2006-10-01

We investigate the chemical reaction between a Cr transition-metal atom and sodium diethyldithiocarbamate (NaDDC), a complexing agent used to detect and extract Cr in human blood samples. Using density-functional-theory-based calculations, we determine their stable structures of Cr(DDC)2ODDC and Cr(DDC)3 complexes and obtain their dissociation energies. We found dissociation energies of -10.66 and -3.24 eV for Cr(DDC)2ODDC and Cr(DDC)3 complexes, respectively. Hence, on the basis of dissociation energies, we have verified that the reaction of NaDDC with Cr produces Cr(DDC)2ODDC as a major product.

Indole-3-acetic acid (IAA) producing Pseudomonas isolates inhibit seed germination and α-amylase activity in durum wheat (Triticum turgidum L.)

Energy Technology Data Exchange (ETDEWEB)

Tabatabaei, S.; Ehsanzadeh, P.; Etesami, H.; Alikhani, H.A.; Glick, B.R.

2016-11-01

The role of plant-associated bacteria in plant physiology and metabolism is well documented, but little has been known about the roles played by Pseudomonas in durum wheat (Triticum turgidum L. var durum) growth and development. An in vitroexperiment was conducted to observe the effect of the inoculation of four indole-3-acetic acid (IAA)-producing Pseudomonas isolates and exogenous IAA on seed germination traits and α-amylase activity of durum wheat. The results showed inoculation with all bacterial isolates led to a decrease in the germination percent, although the extent of the depression varied with the isolate. A significant relationship between concentrations of bacterial IAA and the germination inhibition percent in durum wheat seeds by different bacteria strains was observed. The results of this assay showed the effect of bacterial isolates on α-amylase activity after six and 8 days of inoculation was significant, while effect of these isolates on α-amylase activity after two and 4 days of inoculation was not meaningful. In addition, the exogenously applied IAA displayed a concentration-dependent effect on seed germination attributes and α-amylase activity, consistent with the possibility that the inhibitory effect of bacterial inoculation on seed germination was in consequence of bacteria-produced IAA. Therefore, it may suggested that the inhibitory role of IAA in seed germination and α-amylase activity should be taken into account during the screening of IAA-producing Pseudomonas isolates for durum wheat growth promoting agents. (Author)

Management of Reclaimed Produced Water in the Rocky Mountain States Enhanced with the Expanded U.S. Geological Survey Produced Waters Geochemical Database

Science.gov (United States)

Gans, K. D.; Blondes, M. S.; Reidy, M. E.; Conaway, C. H.; Thordsen, J. J.; Rowan, E. L.; Kharaka, Y. K.; Engle, M.

2016-12-01

The Rocky Mountain states; Wyoming, Colorado, Montana, New Mexico and Utah produce annually approximately 470,000 acre-feet (3.66 billion barrels) of produced water - water that coexists with oil and gas and is brought to the surface with the pumping of oil and gas wells. Concerns about severe drought, groundwater depletion, and contamination have prompted petroleum operators and water districts to examine the recycling of produced water. Knowledge of the geochemistry of produced waters is valuable in determining the feasibility of produced water reuse. Water with low salinity can be reclaimed for use inside and outside of the petroleum industry. Since a great proportion of petroleum wells in the Rocky Mountain states, especially coal-bed methane wells, have produced water with relatively low salinity (generally oil recovery, and even for municipal uses, such as drinking water. The USGS Produced Waters Geochemical Database, available at http://eerscmap.usgs.gov/pwapp, has 60,000 data points in this region (this includes 35,000 new data points added to the 2002 database) and will facilitate studies on the management of produced water for reclamation in the Rocky Mountain region. Expanding on the USGS 2002 database, which contains geochemical analyses of major ions and total dissolved solids, the new data also include geochemical analyses of minor ions and stable isotopes. We have added an interactive web map application which allows the user to filter data on chosen fields (e.g. TDS data set can provide critical insight for better management of produced waters in water-constrained regions of the Rocky Mountains.

77 FR 76537 - Notice of Extension of Public Comment Period: Request for Comments (RFC)-Federal Cybersecurity...

Science.gov (United States)

2012-12-28

... 2011, the White House Office of Science and Technology Policy (OSTP) released the ``Trustworthy... organization utilize the research outcomes? (3) Sustainable Progress: (f) What interactions, relationships, campaigns, or targeted assistance would support a sustainable process to drive changes envisioned by the...

Technological and safety properties of newly isolated GABA-producing Lactobacillus futsaii strains.

Science.gov (United States)

Sanchart, C; Rattanaporn, O; Haltrich, D; Phukpattaranont, P; Maneerat, S

2016-09-01

To evaluate the technological and safety properties of Lactobacillus futsaii CS3 and CS5 isolated from Thai fermented shrimp products (Kung-Som) in order to develop a valuable gamma-aminobutyric acid (GABA)-producing starter culture. Both strains showed a high GABA-producing ability (>8 mg ml(-1) ) in MRS broth containing 20 mg ml(-1) monosodium glutamate (MSG) for 120 h. They also exhibited inhibitory activity against foodborne pathogens and spoilage bacteria. Cell surface hydrophobicity and proteolytic activity were observed in both strains. Strain CS3 survived better under simulated gastrointestinal tract conditions with only 1·5 log-units cell decrease over 8 h. Both strains showed the ability to deconjugate taurocholate and taurodeoxycholate acid. Neither virulence genes nor biogenic amine production was detected. Strain CS3 exhibited susceptibility to all tested antibiotics with the exception of vancomycin, while strain CS5 showed resistance to vancomycin, ampicillin and chloramphenicol. Based on the results obtained, Lact. futsaii CS3 is very promising as a GABA-producing and potentially probiotic starter culture strain for applications in functional fermented foods. This study focuses on the technological and safety characteristics of Lact. futsaii CS3 and CS5 including their high GABA-producing capacity for the first time. This provides a way of replacing chemical GABA by natural GABA using a GABA-producing starter culture candidate, at the same time offering the consumer new attractive food products. © 2016 The Society for Applied Microbiology.

Shallow groundwater and soil chemistry response to 3 years of subsurface drip irrigation using coalbed-methane-produced water

Energy Technology Data Exchange (ETDEWEB)

Bern, C. R.; Boehlke, A. R.; Engle, M. A.; Geboy, N. J.; Schroeder, K. T.; Zupancic, J. W.

2013-10-04

Disposal of produced waters, pumped to the surface as part of coalbed methane (CBM) development, is a significant environmental issue in the Wyoming portion of the Powder River Basin, USA. High sodium adsorption ratios (SAR) of the waters could degrade agricultural land, especially if directly applied to the soil surface. One method of disposing of CBM water, while deriving beneficial use, is subsurface drip irrigation (SDI), where acidified CBM waters are applied to alfalfa fields year-round via tubing buried 0.92 m deep. Effects of the method were studied on an alluvial terrace with a relatively shallow depth to water table (~3 m). Excess irrigation water caused the water table to rise, even temporarily reaching the depth of drip tubing. The rise corresponded to increased salinity in some monitoring wells. Three factors appeared to drive increased groundwater salinity: (1) CBM solutes, concentrated by evapotranspiration; (2) gypsum dissolution, apparently enhanced by cation exchange; and (3) dissolution of native Na–Mg–SO{sub 4} salts more soluble than gypsum. Irrigation with high SAR (24) water has increased soil saturated paste SAR up to 15 near the drip tubing. Importantly though, little change in SAR has occurred at the surface.

Shallow groundwater and soil chemistry response to 3 years of subsurface drip irrigation using coalbed-methane-produced water

Science.gov (United States)

Bern, Carleton R.; Boehlke, Adam R.; Engle, Mark A.; Geboy, Nicholas J.; Schroeder, K.T.; Zupancic, J.W.

2013-01-01

Disposal of produced waters, pumped to the surface as part of coalbed methane (CBM) development, is a significant environmental issue in the Wyoming portion of the Powder River Basin, USA. High sodium adsorption ratios (SAR) of the waters could degrade agricultural land, especially if directly applied to the soil surface. One method of disposing of CBM water, while deriving beneficial use, is subsurface drip irrigation (SDI), where acidified CBM waters are applied to alfalfa fields year-round via tubing buried 0.92 m deep. Effects of the method were studied on an alluvial terrace with a relatively shallow depth to water table (∼3 m). Excess irrigation water caused the water table to rise, even temporarily reaching the depth of drip tubing. The rise corresponded to increased salinity in some monitoring wells. Three factors appeared to drive increased groundwater salinity: (1) CBM solutes, concentrated by evapotranspiration; (2) gypsum dissolution, apparently enhanced by cation exchange; and (3) dissolution of native Na–Mg–SO4 salts more soluble than gypsum. Irrigation with high SAR (∼24) water has increased soil saturated paste SAR up to 15 near the drip tubing. Importantly though, little change in SAR has occurred at the surface.

Antenatal Corticosteroids and Postnatal Fluid Restriction Produce Differential Effects on AQP3 Expression, Water Handling, and Barrier Function in Perinatal Rat Epidermis

Directory of Open Access Journals (Sweden)

Johan Agren

2010-01-01

Full Text Available Loss of water through the immature skin can lead to hypothermia and dehydration in preterm infants. The water and glycerol channel aquaglyceroporin-3 (AQP3 is abundant in fetal epidermis and might influence epidermal water handling and transepidermal water flux around birth. To investigate the role of AQP3 in immature skin, we measured in vivo transepidermal water transport and AQP3 expression in rat pups exposed to clinically relevant fluid homeostasis perturbations. Preterm (E18 rat pups were studied after antenatal corticosteroid exposure (ANS, and neonatal (P1 rat pups after an 18 h fast. Transepidermal water loss (TEWL and skin hydration were determined, AQP3 mRNA was quantified by RT-PCR, and in-situ hybridization and immunocytochemistry were applied to map AQP3 expression. ANS resulted in an improved skin barrier (lower TEWL and skin hydration, while AQP3 mRNA and protein increased. Fasting led to loss of barrier integrity along with an increase in skin hydration. These alterations were not paralleled by any changes in AQP3. To conclude, antenatal corticosteroids and early postnatal fluid restriction produce differential effects on skin barrier function and epidermal AQP3 expression in the rat. In perinatal rats, AQP3 does not directly determine net water transport through the skin.

Consumers and Producers

NARCIS (Netherlands)

E. Maira (Elisa)

2018-01-01

markdownabstractIn the last few decades, advances in information and communication technology have dramatically changed the way consumers and producers interact in the marketplace. The Internet and social media have torn down the information barrier between producers and consumers, leading to

Beneficial Reuse of San Ardo Produced Water

Energy Technology Data Exchange (ETDEWEB)

Robert A. Liske

2006-07-31

This DOE funded study was performed to evaluate the potential for treatment and beneficial reuse of produced water from the San Ardo oilfield in Monterey County, CA. The potential benefits of a successful full-scale implementation of this project include improvements in oil production efficiency and additional recoverable oil reserves as well as the addition of a new reclaimed water resource. The overall project was conducted in two Phases. Phase I identified and evaluated potential end uses for the treated produced water, established treated water quality objectives, reviewed regulations related to treatment, transport, storage and use of the treated produced water, and investigated various water treatment technology options. Phase II involved the construction and operation of a small-scale water treatment pilot facility to evaluate the process's performance on produced water from the San Ardo oilfield. Cost estimates for a potential full-scale facility were also developed. Potential end uses identified for the treated water include (1) agricultural use near the oilfield, (2) use by Monterey County Water Resources Agency (MCWRA) for the Salinas Valley Water Project or Castroville Seawater Intrusion Project, (3) industrial or power plant use in King City, and (4) use for wetlands creation in the Salinas Basin. All of these uses were found to have major obstacles that prevent full-scale implementation. An additional option for potential reuse of the treated produced water was subsequently identified. That option involves using the treated produced water to recharge groundwater in the vicinity of the oil field. The recharge option may avoid the limitations that the other reuse options face. The water treatment pilot process utilized: (1) warm precipitation softening to remove hardness and silica, (2) evaporative cooling to meet downstream temperature limitations and facilitate removal of ammonia, and (3) reverse osmosis (RO) for removal of dissolved salts, boron

Process for producing nuclear reactor fuel oxides

International Nuclear Information System (INIS)

Goenrich, H.; Druckenbrodt, W.G.

1981-01-01

The waste gases of the calcination process furnace in the AVC or AV/PuC process (manufacture of nuclear reactor fuel dioxides) are returned to the furnace in a closed circuit. The NH 3 produced replaces the hydrogen which would otherwise be required for reduction in this process. (orig.) [de

Organic and inorganic species in produced water: Implications for water reuse

Science.gov (United States)

Kharaka, Yousif K.; Rice, Cynthia A.

2004-01-01

Currently 20-30 billion barrels of formation water are co-produced annually in the USA with conventional oil and natural gas. The large database on the geochemistry of this produced water shows salinities that vary widely from ~5,000 to >350,000 mg/L TDS. Chloride, Na and Ca are generally the dominant ions, and concentrations of Fe, Mn, B, NH3 and dissolved organics, including, BTEX, phenols and poly aromatic hydrocarbons (PAHs) may be relatively high. Hazardous concentrations of NORMs, including Ra-226 and Rn-222 have been reported in produced water from several states.Coal-bed methane (CBM) wells currently produce close to a billion barrels of water and deliver ~8% of total natural gas. The salinity of this produced water generally is lower than that of water from petroleum wells; salinity commonly is 1,000-20,000 mg/L, but ranges to150,000 mg/L TDS. Most CBM wells produce Na-HCO3-Cl type water that is low in trace metals and has no reported NORMs. This water commonly has no oil and grease and has relatively low DOC, but its organic composition has not been characterized in detail. The water is disposed of by injection into saline aquifers, through evaporation and/or percolation in disposal pits, road spreading, and surface discharge. Water that has an acceptable salinity and sodium absorption ratio (SAR) is considered acceptable for surface discharge and for injection into freshwater aquifers.As an alternative to costly disposal, low salinity produced water is being considered for reclamation, especially in the arid western USA. The cost of reclaiming this water to meet irrigation, industrial and drinking water standards was evaluated in a 10 gpm pilot field study at Placerita oil field, California. This produced water had a low salinity of ~8,000 mg/L, but high concentration of Si and organics. Removal of B, Si, NH3 and especially organics from this water proved difficult, and the estimated treatment cost was high at $0.08-$0.39/bbl for water treated for

Void formation in ODS EUROFER produced by hot isostatic pressing

Energy Technology Data Exchange (ETDEWEB)

Ortega, Y.; Monge, M.A.; Munoz, A.; Leguey, T.; Pareja, R. [Madrid Univ. Carlos-3, Dept. de Fisica (Spain); Castro, V. de [Oxford Univ., Dept. of Materials (United Kingdom)

2007-07-01

Full text of publication follows: An obstacle in the development of oxide dispersion strengthened (ODS) steels for structural applications in fusion reactors is the toughness lack of the material produced by powder metallurgy and consolidated by hot isostatic pressing (HIP). In particular, ODS EUROFER steel with Y{sub 2}O{sub 3} particles appears to exhibit poor impact properties. To asses the capabilities of this material, it is necessary elucidate if its failure is an inherent characteristic of the production process that can not be mitigated by normalizing and tempering treatments. In order to investigate this particular point, the evolution of the structural defects retained in the ODS material during isochronal annealing has been probed by positron annihilation spectroscopy. The present study has been performed on bail milled EUROFER powders consolidated by HIP, containing 0.25 wt % Y{sub 2}O{sub 3} and without Y{sub 2}O{sub 3}. For comparison, un-milled EUROFER powder consolidated under identical conditions, and as-received EUROFER97 plate produced by Boehler AG have been also investigated. Samples from these four materials were isochronally annealed for 90 min up to 1323 K. Materials produced from milled powders had a longer positron lifetime than the one produced from un-milled powder or the EUROFER plate. In the material containing Y{sub 2}O{sub 3}, i.e. in ODS EUROFER, annealing above 723 K produced a continuous increase in the mean positron lifetime <{tau}> up to reach a maximum value of 208 ps after annealing at 1223 K. A similar annealing behavior was observed for Y{sub 2}O{sub 3}-free milled EUROFER (milled EUROFER), but the <{tau}> value steeply changed from {approx}160 ps at 823 K to {approx}200 ps after annealing at 1023 K. Subsequent anneals above this temperature produced meaningless changes in <{tau}>. The <{tau}> increase in milled EUROFER was accompanied by the intensity increase of a lifetime component of {approx}360 ps that is characteristic

PRESENCE OF FUNGAL CONTAMINATION IN THE PRODUCTION CHAIN OF FRESH FILLED PASTA, WITH PARTICULAR REGARD TO THE PENICILLIUM GENUS

Directory of Open Access Journals (Sweden)

S. Lomonaco

2011-08-01

Full Text Available A shelf-life study was carried out on fresh filled pasta in order to evaluate the presence of fungal contamination in the production process (environment, raw materials and finished products, with particular regard to the Penicillium genus. Analyses were conducted on three types of products, while air sampling was carried out in shaping processes and packaging areas. After isolation of molds, phenotypic identification of Penicillium genus and genotyping confirmation were carried out. As for the isolated strains, the species identified are those expected from this type of matrix: 40.7% P. viridicatum, 14.8% P. griseofulvum, 11.1% P. chrysogenum, 7.4% for P. citrinum, P. nalgiovense and P. crustosum and finally 3.7% for each of the three remaining species (P. roqueforti, P. formosanum, P. atramentosum. Results showed environmental contamination, particularly at the end of the work day. In fact, 59% of identified Penicillia originated from air samples, while only 10% from foods. Moreover, even if fungal contamination was observed at all considered times, level of contamination were generally low and never resulted in spoilage of the product as no macroscopically visible colonies were observed. It is therefore clear that pasteurization and modified atmosphere packaging are able to control the growth of potentially present fungal contamination.

Biologically produced sulfur

NARCIS (Netherlands)

Kleinjan, W.E.; Keizer, de A.; Janssen, A.J.H.

2003-01-01

Sulfur compound oxidizing bacteria produce sulfur as an intermediate in the oxidation of hydrogen sulfide to sulfate. Sulfur produced by these microorganisms can be stored in sulfur globules, located either inside or outside the cell. Excreted sulfur globules are colloidal particles which are

Producing transparent PLZT ceramics using different synthesis method

International Nuclear Information System (INIS)

Dambekalne, M.; Antonova, M.; Livinsh, M.; Kalvane, A.; Plonska, M.; Garbarz-Glos, B.

2004-01-01

Full text: Ceramic samples of Pb 1-x La x (Zr 0.65 Ti 0.35 )O 3 (x 8, 9, 10) were prepared from powders being sintered by two methods: 1) peroxohydroxopolimer (PHP), where as precursors were used solutions of inorganic salts TiCl 4 , ZrOCl 4 ·8H 2 O, Pb(NO 3 ) 2 , La(NO 3 ) 3 ·6H 2 O); 2) sol-gel, using as precursors solutions of metal organic salts Pb(COOCH 3 ) 2 ·3H 2 O, La(COOCH 3 ) 3 ·1.5H 2 O, Zr(OCH 2 CH 2 CH 3 ) 4 , Ti(OCH 2 CH 2 CH 3 ) 4 . The thermal regimes for both powders were similar: synthesis at 600 0 C for 2 - 4h, obtaining amorphous nanopowder. Ceramic samples were produced by hot pressing at 1100 - 1200 0 C for 2 - 6h and pressure of 20Mpa.Optical transmittance of ceramic samples from PHP derived powders was higher than that from sol- gel derived. The transparency of poled plates with thickness of 0.3mm (wavelength λ = 630nm) was 67 - 69% and 56 - 59%, respectively. It can be explained by lack of technical support for sol-gel processing in atmosphere of neutral gas, as metal organic precursors are extremely sensitive to moisture of air. X-ray and DTA studies were used for powders. Dielectrics, ferroelectric and optical properties as well as studies of icrostructure were carried out for ceramic samples. The grain size of ceramics produced from PHP powders is 3- 4μ, for sol-gel ceramics less than 1μ

Suitability of tunneling ionization produced plasmas for the plasma beat wave accelerator

International Nuclear Information System (INIS)

Leeman, W.P.; Clayton, C.E.; Marsh, K.A.; Dyson, A.; Joshi, C.

1991-01-01

Tunneling ionization can be thought of as the high intensity, low frequency limit of multi-photon ionization (MPI). Extremely uniform plasmas were produced by the latter process at Rutherford lab for beat wave excitation experiments using a 0.5 μm laser. Plasmas with 100% ionization were produced with densities exceeding 10 17 cm -3 . The experiment uses a CO 2 laser (I max ∼ 5 x 10 14 W/cm 2 ) which allows the formation of plasmas via the tunneling process. For the experiments the authors need plasmas with densities in the range of 5 to 10 x 10 16 cm -3 . Using Thomson scattering as a diagnostic they have explored the density and temperature regime of tunneling ionization produced plasmas. They find that plasmas with densities up to 10 16 cm -3 can indeed be produced and that these plasmas are hot. Beyond this density strong refraction of laser radiation occurs due to the radial profile of the plasma. Implications of this work to the Beat Wave Accelerator program will be discussed

Incentivizing and Evaluating Internet-Wide Network Measurements

Science.gov (United States)

2014-03-01

Romania . . . . . . . . . . . . . . . . . . . . . . 62 Figure A.20 Cumulative SCR for Egypt . . . . . . . . . . . . . . . . . . . . . . . 63 Figure A...defined in RFC 1918 [29] and these packets should never be routed in the public Internet. These packets, however, are often filtered in the network core...Turkey, Singapore, Russia, Romania , Pakistan, Philippines, Netherlands, Indonesia, Hun- gary, Guatemala, Finland, Denmark, Switzerland, Brazil

77 FR 76624 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to the Foreign...

Science.gov (United States)

2012-12-28

... of Defense, the Secretary of State, and the Secretary of Homeland Security when designating and... to be: (1) Materially assisting in, or providing financial or technological support for or to, or...; nationality Mexico; citizen Mexico; R.F.C. GOLF-620610-M61 (Mexico); C.U.R.P. GOLF620410HSLRYD08 (Mexico...

Direct observation of an isopolyhalomethane O-H insertion reaction with water: Picosecond time-resolved resonance Raman (ps-TR3) study of the isobromoform reaction with water to produce a CHBr2OH product

International Nuclear Information System (INIS)

Kwok, W.M.; Zhao Cunyuan; Li Yunliang; Guan Xiangguo; Phillips, David Lee

2004-01-01

Picosecond time-resolved resonance Raman (ps-TR 3 ) spectroscopy was used to obtain the first definitive spectroscopic observation of an isopolyhalomethane O-H insertion reaction with water. The ps-TR 3 spectra show that isobromoform is produced within several picoseconds after photolysis of CHBr 3 and then reacts on the hundreds of picosecond time scale with water to produce a CHBr 2 OH reaction product. Photolysis of low concentrations of bromoform in aqueous solution resulted in noticeable formation of HBr strong acid. Ab initio calculations show that isobromoform can react with water to produce a CHBr 2 (OH) O-H insertion reaction product and a HBr leaving group. This is consistent with both the ps-TR 3 experiments that observe the reaction of isobromoform with water to form a CHBr 2 (OH) product and photolysis experiments that show HBr acid formation. We briefly discuss the implications of these results for the phase dependent behavior of polyhalomethane photochemistry in the gas phase versus water solvated environments

[Contrastive analysis of artifacts produced by metal dental crowns in 3.0 T magnetic resonance imaging with six sequences].

Science.gov (United States)

Lan, Gao; Yunmin, Lian; Pu, Wang; Haili, Huai

2016-06-01

This study aimed to observe and evaluate six 3.0 T sequences of metallic artifacts produced by metal dental crowns. Dental crowns fabricated with four different materials (Co-Gr, Ni-Gr, Ti alloy and pure Ti) were evaluated. A mature crossbreed dog was used as the experimental animal, and crowns were fabricated for its upper right second premolar. Each crown was examined through head MRI (3.0 T) with six sequences, namely, T₁ weighted-imaging of spin echo (T₁W/SE), T₂ weighted-imaging of inversion recovery (T₂W/IR), T₂ star gradient echo (T₂*/GRE), T2 weighted-imaging of fast spin echo (T₂W/FSE), T₁ weighted-imaging of fluid attenuate inversion recovery (T₂W/FLAIR), and T₂ weighted-imaging of propeller (T₂W/PROP). The largest area and layers of artifacts were assessed and compared. The artifact in the T₂*/GRE sequence was significantly wider than those in the other sequences (P 0.05). T₂*/GRE exhibit the strongest influence on the artifact, whereas the five other sequences contribute equally to artifact generation.

Automatically producing tailored web materials for public administration

Science.gov (United States)

Colineau, Nathalie; Paris, Cécile; Vander Linden, Keith

2013-06-01

Public administration organizations commonly produce citizen-focused, informational materials describing public programs and the conditions under which citizens or citizen groups are eligible for these programs. The organizations write these materials for generic audiences because of the excessive human resource costs that would be required to produce personalized materials for everyone. Unfortunately, generic materials tend to be longer and harder to understand than materials tailored for particular citizens. Our work explores the feasibility and effectiveness of automatically producing tailored materials. We have developed an adaptive hypermedia application system that automatically produces tailored informational materials and have evaluated it in a series of studies. The studies demonstrate that: (1) subjects prefer tailored materials over generic materials, even if the tailoring requires answering a set of demographic questions first; (2) tailored materials are more effective at supporting subjects in their task of learning about public programs; and (3) the time required to specify the demographic information on which the tailoring is based does not significantly slow down the subjects in their information seeking task.

Superconducting lead particles produced by chemical techniques

Science.gov (United States)

Fariss, T. L.; Nixon, W. E.; Bucelot, T. J.; Deaver, B. S., Jr.; Mitchell, J. W.

1982-09-01

The superconductivity of extremely small lead particles has been studied as a function of size, surface condition, and connectivity using chemical techniques to produce particles of well-controlled size and shape suspended in insulating media. Approximately monodisperse suspensions of equiaxed, rod, and lath-shaped particles of lead halides and other lead compounds suspended in gelatin, polyacrylamide, polyvinylpyrrolidone, polyvinyl alcohol, methyl cellulose, and hydroxyethyl cellulose have been produced. These particles have been reduced to pseudomorphs of lead in the liquid phase or the suspensions have been coated on substrates and dried before reduction. Reducing solutions containing aminoiminomethanesulfinic acid are effective with particles of lead halides, lead phosphate, lead sulfate, and lead tartrate. Suspensions of smaller discrete lead particles have also been produced by direct reduction of solutions of soluble lead salts containing suitable polymers, chelating, and stabilizing agents. Dispersions with mean particle dimensions between 3 nm and 5 μm, and a narrow size-frequency distribution, have been produced. The superconductivity of the particles has been characterized by measurements of the magnetization as a function of temperature and magnetic field. The larger particles have a transition temperature of 7.2 K, the same as bulk lead; however, for particles of characteristic dimensions less than 20 nm, the transition temperature is lower by ˜0.1 K.

Superconducting lead particles produced by chemical techniques

International Nuclear Information System (INIS)

Fariss, T.L.; Nixon, W.E.; Bucelot, T.J.; Deaver, B.S. Jr.; Mitchell, J.W.

1982-01-01

The superconductivity of extremely small lead particles has been studied as a function of size, surface condition, and connectivity using chemical techniques to produce particles of well-controlled size and shape suspended in insulating media. Approximately monodisperse suspensions of equiaxed, rod, and lath-shaped particles of lead halides and other lead compounds suspended in gelatin, polyacrylamide, polyvinylpyrrolidone, polyvinyl alcohol, methyl cellulose, and hydroxyethyl cellulose have been produced. These particles have been reduced to pseudomorphs of lead in the liquid phase or the suspensions have been coated on substrates and dried before reduction. Reducing solutions containing aminoiminomethanesulfinic acid are effective with particles of lead halides, lead phosphate, lead sulfate, and lead tartrate. Suspensions of smaller discrete lead particles have also been produced by direct reduction of solutions of soluble lead salts containing suitable polymers, chelating, and stabilizing agents. Dispersions with mean particle dimensions between 3 nm and 5 μm, and a narrow size-frequency distribution, have been produced. The superconductivity of the particles has been characterized by measurements of the magnetization as a function of temperature and magnetic field. The larger particles have a transition temperature of 7.2 K, the same as bulk lead; however, for particles of characteristic dimensions less than 20 nm, the transition temperature is lower by approx.0.1 K

A Multifunctional and Possible Skin UV Protectant, (3R-5-Hydroxymellein, Produced by an Endolichenic Fungus Isolated from Parmotrema austrosinense

Directory of Open Access Journals (Sweden)

Lu Zhao

2016-12-01

Full Text Available Lichens are considered a great bio-resource because they produce large numbers of secondary metabolites with many biological activities; however, they have not been cultivated under artificial conditions to date. As a result, lichen substances from natural sources are limited and have not been widely utilized in commercial applications. Accordingly, interest in lichen-associated fungi, especially endogenic fungi, has increased. Ultraviolet (UV radiation in sunlight is harmful to human health, resulting in demand for effective UV filtering agents for use in sunscreen. In this study, we purified (3R-5-hydroxymellein, which has UVA absorption activity, from the secondary metabolites of an endolichenic fungus (ELF000039. The antioxidant properties were then assessed by in vitro tests. The antioxidant activity of (3R-5-hydroxymellein was high when compared to the recognized antioxidants ascorbic acid (ASA and butyl hydroxyl anisole (BHA. Moreover, the compound exhibited no cytotoxicity toward mouse melanoma cell lines, B16F1 and B16F10, or the normal cell line, HaCaT. Furthermore, (3R-5-hydroxymellein recovered the damage caused by UVB irradiation and inhibited melanin synthesis. Taken together, these results suggest that (3R-5-hydroxymellein could have an interesting and vital profile to go further development as a multifunctional skin UV protectant.

Inhibition of aflatoxin-producing aspergilli by lactic acid bacteria ...

African Journals Online (AJOL)

A total of six lactic acid bacteria (LAB) isolates were selected from five indigenously fermented cereal gruels and identified as Lactobacillus fermentum OYB, Lb. fermentum RS2, Lb. plantarum MW, Lb. plantarum YO, Lb. brevis WS3, and Lactococcus spp. RS3. Six aflatoxin-producing aspergilli were also selected from the ...

African-American Men with Gleason Score 3+3=6 Prostate Cancer Produce Less Prostate Specific Antigen than Caucasian Men: A Potential Impact on Active Surveillance.

Science.gov (United States)

Kryvenko, Oleksandr N; Balise, Raymond; Soodana Prakash, Nachiketh; Epstein, Jonathan I

2016-02-01

We assess the difference in prostate specific antigen production between African-American and Caucasian men with Gleason score 3+3=6 prostate cancer. We measured tumor volume in 414 consecutive radical prostatectomies from men with National Comprehensive Cancer Network(®) low risk prostate cancer (348 Caucasian, 66 African-American) who had Gleason score 3+3=6 disease at radical prostatectomy. We then compared clinical presentation, pathological findings, prostate specific antigen, prostate specific antigen density and prostate specific antigen mass (an absolute amount of prostate specific antigen in patient's circulation) between African-American and Caucasian men. The t-test and Wilcoxon rank sum were used for comparison of means. African-American and Caucasian men had similar clinical findings based on age, body mass index and prostate specific antigen. There were no statistically significant differences between the dominant tumor nodule volume and total tumor volume (mean 0.712 vs 0.665 cm(3), p=0.695) between African-American and Caucasian men. Prostates were heavier in African-American men (mean 55.4 vs 46.3 gm, p prostate tissue contributing to prostate specific antigen in African-American men, prostate specific antigen mass was not different from that of Caucasian men (mean 0.55 vs 0.558 μg, p=0.95). Prostate specific antigen density was significantly less in African-American men due to larger prostates (mean 0.09 vs 0.105, p prostate cancer produce less prostate specific antigen than Caucasian men. African-American and Caucasian men had equal serum prostate specific antigen and prostate specific antigen mass despite significantly larger prostates in African-American men with all other parameters, particularly total tumor volume, being the same. This finding has practical implications in T1c cases diagnosed with prostate cancer due to prostate specific antigen screening. Lowering the prostate specific antigen density threshold in African-American men may

Measurement of the ratio of C3+ and O4+ ions produced by ECRIS to prepare a laser cooling experiment at storage rings

International Nuclear Information System (INIS)

Zhu, X.L.; Wen, W.Q.; Ma, X.; Li, J.Y.; Feng, W.T.; Zhang, R.T.; Wang, Enliang; Yan, S.; Guo, D.L.; Hai, B.; Qian, D.B.; Zhang, P.; Xu, S.; Zhao, D.M.; Yang, J.; Zhang, D.C.; Li, B.; Gao, Y.; Huang, Z.K.; Wang, H.B.

2014-01-01

To prepare the upcoming laser cooling of relativistic C 3+ ion beams at the experimental Cooler Storage Ring (CSRe), a novel experiment was performed using a reaction microscope to determine the ratio of C 3+ ions in mixed ion beams of C 3+ and O 4+ that are produced by an Electron Cyclotron Resonance Ion Source (ECRIS). The mixed ion beams at an energy of 4 keV/u were directed to collide on a supersonic helium gas target. Using the single-electron capture channel and the coincidence technique, the fractions of C 3+ and O 4+ ions in the primary beam were obtained. Using different injection gases for ECRIS, including O 2 , CO, CO 2 , and CH 4 , at a fixed radio-frequency power of 300 W, the measured results showed that the fraction of C 3+ ions was greater than 70% for the injection gases of CO and CO 2 . These measured results are very important and helpful for the upcoming laser cooling experiments

EUV laser produced and induced plasmas for nanolithography

Science.gov (United States)

Sizyuk, Tatyana; Hassanein, Ahmed

2017-10-01

EUV produced plasma sources are being extensively studied for the development of new technology for computer chips production. Challenging tasks include optimization of EUV source efficiency, producing powerful source in 2 percentage bandwidth around 13.5 nm for high volume manufacture (HVM), and increasing the lifetime of collecting optics. Mass-limited targets, such as small droplet, allow to reduce contamination of chamber environment and mirror surface damage. However, reducing droplet size limits EUV power output. Our analysis showed the requirement for the target parameters and chamber conditions to achieve 500 W EUV output for HVM. The HEIGHTS package was used for the simulations of laser produced plasma evolution starting from laser interaction with solid target, development and expansion of vapor/plasma plume with accurate optical data calculation, especially in narrow EUV region. Detailed 3D modeling of mix environment including evolution and interplay of plasma produced by lasers from Sn target and plasma produced by in-band and out-of-band EUV radiation in ambient gas, used for the collecting optics protection and cleaning, allowed predicting conditions in entire LPP system. Effect of these conditions on EUV photon absorption and collection was analyzed. This work is supported by the National Science Foundation, PIRE project.

TEACHER-PRODUCED INSTRUCTIONAL FILMS IN CHEMISTRY, 8MM AND SUPER 8.

Science.gov (United States)

O'CONNOR, ROD; SLABAUGH, WENDELL

TECHNIQUES FOR PRODUCING 8MM INSTRUCTIONAL FILMS IN CHEMISTRY ARE PRESENTED. IN PART I A PHILOSOPHY OF TEACHER-PRODUCED FILMS IS DEVELOPED, EMPHASIZING THE VALUE OF THE LOCAL SETTING, AND CUSTOM-MADE CONTENTS. APPLICATIONS SUGGESTED ARE (1) TECHNIQUE INSTRUCTION, (2) FILMED EXPERIMENTS, (3) INSTRUMENT FAMILIARIZATION, (4) LECTURE AIDS, AND (5)…

Production, Purification, and Identification of Cholest-4-en-3-one Produced by Cholesterol Oxidase from Rhodococcus sp. in Aqueous/Organic Biphasic System.

Science.gov (United States)

Wu, Ke; Li, Wei; Song, Jianrui; Li, Tao

2015-01-01

Cholest-4-en-3-one has positive uses against obesity, liver disease, and keratinization. It can be applied in the synthesis of steroid drugs as well. Most related studies are focused on preparation of cholest-4-en-3-one by using whole cells as catalysts, but production of high-quality cholest-4-en-3-one directly from cholesterol oxidase (COD) using an aqueous/organic two-phase system has been rarely explored. This study set up an enzymatic reaction system to produce cholest-4-en-3-one. We developed and optimized the enzymatic reaction system using COD from COX5-6 (a strain of Rhodococcus) instead of whole-cell biocatalyst. This not only simplifies and accelerates the production but also benefits the subsequent separation and purification process. Through extraction, washing, evaporation, column chromatography, and recrystallization, we got cholest-4-en-3-one with purity of 99.78%, which was identified by nuclear magnetic resonance, mass spectroscopy, and infrared spectroscopy. In addition, this optimized process of cholest-4-en-3-one production and purification can be easily scaled up for industrial production, which can largely decrease the cost and guarantee the purity of the product.

Environmental aspects of produced-water salt releases in onshore and coastal petroleum-producing areas of the conterminous U.S. - a bibliography

Science.gov (United States)

Otton, James K.

2006-01-01

Environmental effects associated with the production of oil and gas have been reported since the first oil wells were drilled in the Appalachian Basin in Pennsylvania and Kentucky in the early to mid-1800s. The most significant of these effects are the degradation of soils, ground water, surface water, and ecosystems they support by releases of suspended and dissolved hydrocarbons and co-produced saline water. Produced water salts are less likely than hydrocarbons to be adsorbed by mineral phases in the soil and sediment and are not subject to degradation by biologic processes. Sodium is a major dissolved constituent in most produced waters and it causes substantial degradation of soils through altering of clays and soil textures and subsequent erosion. Produced water salts seem to have the most wide-ranging effects on soils, water quality, and ecosystems. Trace elements, including boron, lithium, bromine, fluorine, and radium, also occur in elevated concentrations in some produced waters. Many trace elements are phytotoxic and are adsorbed and may remain in soils after the saline water has been flushed away. Radium-bearing scale and sludge found in oilfield equipment and discarded on soils pose additional hazards to human health and ecosystems. This bibliography includes studies from across the oil- and natural-gas-producing areas of the conterminous United States that were published in the last 80 yrs. The studies describe the effects of produced water salts on soils, water quality, and ecosystems. Also included are reports that describe (1) the inorganic chemistry of produced waters included in studies of formation waters for various purposes, (2) other sources of salt affecting water quality that may be mistaken for produced water effects, (3) geochemical and geophysical techniques that allow discrimination of salt sources, (4) remediation technologies designed to repair damage caused to soils and ground water by produced water salts, and (5) contamination by

Consumer and producer environmental responsibility. Comparing two approaches

International Nuclear Information System (INIS)

Rodrigues, Joao; Domingos, Tiago

2008-01-01

Two different indicators of 'environmental responsibility' were independently proposed by Rodrigues et al. [Rodrigues, J., Domingos, T., Giljum, S., Schneider, F., 2006. Designing an indicator of environmental responsibility. Ecological Economics, 59 (3): 256-266.] and Lenzen et al. [Lenzen, M., Murray, J., Sack, F., Wiedmann, T., 2007. Shared producer and consumer responsibility - theory and practice. Ecological Economics, 61: 27-42.]. These indicators are both supposed to reflect the indirect effects of consumer and producer behavior in the generation of environmental pressure. In this paper we compare their mathematical properties and interpretation. We conclude that they have different implications for environmental policy. (author)

Characteristics of Color Produced by Awa Natural Indigo and Synthetic Indigo

Directory of Open Access Journals (Sweden)

Miyoko Kawahito

2009-06-01

Full Text Available Color of cloth dyed with Awa natural indigo is quantitatively compared with color of the cloth dyed with synthetic indigo. Results showed that: 1 color produced by Awa natural indigo is bluer and brighter than color produced by synthetic indigo; 2 a single Gaussian function fits the profile of the running of color produced by Awa natural indigo and the running of color produced by synthetic indigo prepared with sodium hydrosulfite approximates a linear sum of two Gaussian functions; 3 before and after washing, color is quantitatively more uneven when produced by Awa natural indigo than when produced by synthetic indigo; 4 the diffusion coefficient of Awa natural indigo is lower than that of synthetic indigo; 5 color superiority of Awa natural indigorelates to smaller diffusion coefficient, slower reduction, poorer penetration, and higher dye aggregation.

Cells and methods for producing fatty alcohols

Science.gov (United States)

Pfleger, Brian F.; Youngquist, Tyler J.

2017-07-18

Recombinant cells and methods for improved yield of fatty alcohols. The recombinant cells harbor a recombinant thioesterase gene, a recombinant acyl-CoA synthetase gene, and a recombinant acyl-CoA reductase gene. In addition, a gene product from one or more of an acyl-CoA dehydrogenase gene, an enoyl-CoA hydratase gene, a 3-hydroxyacyl-CoA dehydrogenase gene, and a 3-ketoacyl-CoA thiolase gene in the recombinant cells is functionally deleted. Culturing the recombinant cells produces fatty alcohols at high yields.

Producing metallurgic coke

Energy Technology Data Exchange (ETDEWEB)

Abe, T.; Isida, K.; Vada, Y.

1982-11-18

A mixture of power producing coals with coal briquets of varying composition is proposed for coking in horizontal chamber furnaces. The briquets are produced from petroleum coke, coal fines or semicoke, which make up less than 27 percent of the mixture to be briquetted and coals with a standard coking output of volatile substances and coals with high maximal Gizeler fluidity. The ratio of these coals in the mixture is 0.6 to 2.1 or 18 to 32 percent, respectively. Noncaking or poorly caking coals are used as the power producing coals. The hardness of the obtained coke is DJ15-30 = 90.5 to 92.7 percent.

Speed of sound in biodiesel produced by low power ultrasound

Science.gov (United States)

Oliveira, P. A.; Silva, R. M. B.; Morais, G. C.; Alvarenga, A. V.; Costa-Felix, R. P. B.

2018-03-01

The quality control of the biodiesel produced is an important issue to be addressed for every manufacturer or retailer. The speed of sound is a property that has an influence on the quality of the produced fuel. This work presents the evaluation about the speed of sound in biodiesel produced with the aid of low power ultrasound in the frequencies of 1 MHz and 3 MHz. The speed of sound was measured by pulse-echo technique. The ultrasonic frequency used during reaction affects the speed of sound in biodiesel. The larger expanded uncertainty for adjusted curve was 4.9 m.s-1.

Comparison of 3D point clouds produced by LIDAR and UAV photoscan in the Rochefort cave (Belgium)

Science.gov (United States)

Watlet, Arnaud; Triantafyllou, Antoine; Kaufmann, Olivier; Le Mouelic, Stéphane

2016-04-01

Amongst today's techniques that are able to produce 3D point clouds, LIDAR and UAV (Unmanned Aerial Vehicle) photogrammetry are probably the most commonly used. Both methods have their own advantages and limitations. LIDAR scans create high resolution and high precision 3D point clouds, but such methods are generally costly, especially for sporadic surveys. Compared to LIDAR, UAV (e.g. drones) are cheap and flexible to use in different kind of environments. Moreover, the photogrammetric processing workflow of digital images taken with UAV becomes easier with the rise of many affordable software packages (e.g. Agisoft, PhotoModeler3D, VisualSFM). We present here a challenging study made at the Rochefort Cave Laboratory (South Belgium) comprising surface and underground surveys. The site is located in the Belgian Variscan fold-and-thrust belt, a region that shows many karstic networks within Devonian limestone units. A LIDAR scan has been acquired in the main chamber of the cave (~ 15000 m³) to spatialize 3D point cloud of its inner walls and infer geological beds and structures. Even if the use of LIDAR instrument was not really comfortable in such caving environment, the collected data showed a remarkable precision according to few control points geometry. We also decided to perform another challenging survey of the same cave chamber by modelling a 3D point cloud using photogrammetry of a set of DSLR camera pictures taken from the ground and UAV pictures. The aim was to compare both techniques in terms of (i) implementation of data acquisition and processing, (ii) quality of resulting 3D points clouds (points density, field vs cloud recovery and points precision), (iii) their application for geological purposes. Through Rochefort case study, main conclusions are that LIDAR technique provides higher density point clouds with slightly higher precision than photogrammetry method. However, 3D data modeled by photogrammetry provide visible light spectral information

[Morphological characteristics and physiological properties of aflatoxin B1 producing and non-producing Aspergillus flavus strains].

Science.gov (United States)

Kogbo, W; Lemarinier, S; Boutibonnes, P

1985-09-01

Comparison between about 80 strains of Aspergillus flavus, belonging to the series flavus and oryzae, obtained from international collections but also isolated from French or African substrates revealed the following observations: 1. Cultural and morphological characteristics of toxicogenic and atoxicogenic strains of A. flavus are similar. However, the former produce a diffusible yellow pigment in 83% of isolates. 2. The two groups of conidiospores have the same resistance to UV irradiation (254 nm, 5 and 10 min). All the strains are equally sensitive to 4 antifungal antibiotics: nystatine, ketoconazole, clotrimazole and amphotericine. 3. A difference was seen in the capacity to produce enzymes as alpha-galactosidase, beta-galactosidase and beta-glucosidase, implicated in the glucid metabolism. The specific hydrolytic activity has been confirmed by the characterization of a large amount of beta-galactosidase and by a diauxic growth on glucose medium supplemented by lactose. Possible relationship between these characters and aflatoxin B1 production by A. flavus strains is discussed.

Irritant and allergenic potential of some latex producing Indian plants

Directory of Open Access Journals (Sweden)

J S Pasricha

1990-01-01

Full Text Available The iatex exuding from the freshly sliced stems/leaves of 11 Indian plants was tested on 10 volunteers each by the open patch test and in 5 volunteers each by the 48 hour occluded patch test technique. In the open patch test, there was no reaction with (1 calotropis procera, (2 Alstonia scholaris,(3 Euphorbia splendens, (4 Euphorbia clarkina (5 Nerium indicum, and (6 Padilanthus tithymaloides (Green and white leaf variety, while mild reactions were observed with Euphorbia pulcherrima in 3 volunteers, Ficus elastida in 2 volunteers, and Pedilanthus tithymaloidas (Green leaf variety and Plumeria indica in one volunteer each Sapium sebiferum on the other hand produced severe itching, burning and erythema in all the 10 volunteers. The 48 hour occluded patch test produced definite reactions with Pedilanthus tithymaloides (Green leaf varietyin 2 cases and calotropis procera and Euphorbia clarkina in 1 case each. Sapium sebiferum on the other hand produced cauterization type of reactions in all the cases.

Salmonella in beef and produce from honduras.

Science.gov (United States)

Maradiaga, Martha; Miller, Mark F; Thompson, Leslie; Pond, Ansen; Gragg, Sara E; Echeverry, Alejandro; Garcia, Lyda G; Loneragan, Guy H; Brashears, Mindy M

2015-03-01

Salmonella continues to cause a considerable number of foodborne illnesses worldwide. The sources of outbreaks include contaminated meat and produce. The purpose of this study was to establish an initial investigation of the burden of Salmonella in produce and beef from Honduras by sampling retail markets and abattoirs. Retail produce samples (cantaloupes, cilantro, cucumbers, leafy greens, peppers, and tomatoes; n = 573) were purchased in three major cities of Honduras, and retail whole-muscle beef (n = 555) samples were also purchased in four major cities. Additionally, both hide and beef carcass (n = 141) samples were collected from two Honduran abattoirs. Whole-muscle beef samples were obtained using a sponge hydrated with buffered peptone water, and 10 ml of the buffered peptone water rinsate of each produce sample was collected with a dry sponge and placed in a bag to be transported back to the United States. Salmonella was detected using a commercially available, closeplatform PCR system, and positive samples were subjected to culture on selective media to obtain isolates. Overall, the prevalence of Salmonella-positive samples, based on PCR detection in Honduras (n = 555) retail beef was 10.1% (95% confidence interval = 7.8, 12.9), whereas 7.8% (n = 141) of beef carcass and hides samples were positive in both beef plants. The overall Salmonella prevalence for all produce samples (n = 573) collected was 2.1% (95% confidence interval = 1.2, 3.6). The most common serotypes identified in Honduras were Salmonella Typhimurium followed by Derby. These results provide an indication of Salmonella contamination of beef and produce in Honduras. Developing a Salmonella baseline for Latin America through an initial investigation like the one presented here contributes to a broader global understanding of the potential exposure through food, thus providing insight into the needs for control strategies.

Thermal stability of the grain structure in the W-2V and W-2V-0.5Y2O3 alloys produced by hot isostatic pressing

International Nuclear Information System (INIS)

Martínez, J.; Savoini, B.; Monge, M.A.; Muñoz, A.; Armstrong, D.E.J.; Pareja, R.

2013-01-01

Highlights: • W-2V and ODS W-2V-0.5Y 2 O 3 alloys have been produced following a powder metallurgy route. • Grain microstructure and microhardness have been studied after isothermal treatments in vacuum. • Both alloys exhibit a duplex grain size population: a submicron-sized grain and a coarse grained one. • The Y 2 O 3 addition inhibits growth of the coarse grains for T 2 O 3 nanoparticles enhance the microhardness of W-2V-0.5Y 2 O 3 . -- Abstract: W-2V and ODS W-2V-0.5Y 2 O 3 alloys have been produced following a powder metallurgy route consisting of mechanical alloying and a subsequent high isostatic pressing HIP at 1573 K. The grain microstructure and microhardness recovery of the alloys have been studied in samples subjected to isothermal treatments in vacuum in temperature range 1073–1973 K. Both alloys exhibit a duplex grain size distribution consisting of a submicron-sized grain and a coarse-grained population. It has been found that the Y 2 O 3 addition inhibits growth of the coarse grains at T 2 O 3 , respectively, was observed at T ≥ 1573 K. It resulted that the rate constant for grain growth is 30 times higher in W-2V-0.5Y 2 O 3 than in W-2V. The considerable enhancement of the microhardness in the W-2V-0.5Y 2 O 3 appears to be associated to dispersion strengthening

Controlled reduction of LaFe xMn yMo zO3/Al2O3 composites to produce highly dispersed and stable Fe0 catalysts: a Mössbauer investigation

Directory of Open Access Journals (Sweden)

Juliana Cristina Tristão

2008-06-01

Full Text Available In this work, controlled reduction of perovskites supported on Al2O3 was used to prepare thermally stable nanodispersed iron catalysts based on Fe0/La2O3/Al2O3. The perovskites composites LaFe0.90Mn0.08Mo0.02O3(25, 33 and 50 wt (% /Al2O3 and LaFe0.90Mn0.1O3(25 wt (% /Al2O3 were prepared and characterized by XRD, BET, TPR, SEM and Mössbauer spectroscopy. XRD for unsupported perovskite showed the formation of a single phase perovskite structure. The Mössbauer spectra of the perovskites were fitted with hyperfine field distribution model for the perovskite. Supported perovskites on Al2O3 showed a decrease of the hyperfine field in respect to unsupported perovskite, due to decrease of particle size and dispersion of the Fe3+ specimens on the support. Also showed broaden lines and relaxation effects due to the small particle size. To produce the Fe0 catalyst, the composite perovskite(25%/Al2O3 was reduced with H2 at 900, 1000 and 1100 °C for 1 hour. XRD data indicated the formation of Fe0 catalyst with particles sizes of ca. 35 nm. The Mössbauer spectrum showed the formation of metallic iron and doublets corresponding to species of octahedric Fe2+ and Fe3+ sites dispersed on Al2O3. These catalysts showed improved stability towards sintering even upon treatment at 1000 and 1100 °C under H2.

7 CFR 1206.16 - Producer.

Science.gov (United States)

2010-01-01

... producing, or causing to be produced, mangos beyond the person's own family use and having value at first... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.16 Producer. Producer means...

Energy Efficiency of Biogas Produced from Different Biomass Sources

International Nuclear Information System (INIS)

Begum, Shahida; Nazri, A H

2013-01-01

Malaysia has different sources of biomass like palm oil waste, agricultural waste, cow dung, sewage waste and landfill sites, which can be used to produce biogas and as a source of energy. Depending on the type of biomass, the biogas produced can have different calorific value. At the same time the energy, being used to produce biogas is dependent on transportation distance, means of transportation, conversion techniques and for handling of raw materials and digested residues. An energy systems analysis approach based on literature is applied to calculate the energy efficiency of biogas produced from biomass. Basically, the methodology is comprised of collecting data, proposing locations and estimating the energy input needed to produce biogas and output obtained from the generated biogas. The study showed that palm oil and municipal solid waste is two potential sources of biomass. The energy efficiency of biogas produced from palm oil residues and municipal solid wastes is 1.70 and 3.33 respectively. Municipal solid wastes have the higher energy efficiency due to less transportation distance and electricity consumption. Despite the inherent uncertainties in the calculations, it can be concluded that the energy potential to use biomass for biogas production is a promising alternative.

An Amoebal Grazer of Cyanobacteria Requires Cobalamin Produced by Heterotrophic Bacteria.

Science.gov (United States)

Ma, Amy T; Beld, Joris; Brahamsha, Bianca

2017-05-15

Amoebae are unicellular eukaryotes that consume microbial prey through phagocytosis, playing a role in shaping microbial food webs. Many amoebal species can be cultivated axenically in rich media or monoxenically with a single bacterial prey species. Here, we characterize heterolobosean amoeba LPG3, a recent natural isolate, which is unable to grow on unicellular cyanobacteria, its primary food source, in the absence of a heterotrophic bacterium, a Pseudomonas species coisolate. To investigate the molecular basis of this requirement for heterotrophic bacteria, we performed a screen using the defined nonredundant transposon library of Vibrio cholerae , which implicated genes in corrinoid uptake and biosynthesis. Furthermore, cobalamin synthase deletion mutations in V. cholerae and the Pseudomonas species coisolate do not support the growth of amoeba LPG3 on cyanobacteria. While cyanobacteria are robust producers of a corrinoid variant called pseudocobalamin, this variant does not support the growth of amoeba LPG3. Instead, we show that it requires cobalamin that is produced by the Pseudomonas species coisolate. The diversity of eukaryotes utilizing corrinoids is poorly understood, and this amoebal corrinoid auxotroph serves as a model for examining predator-prey interactions and micronutrient transfer in bacterivores underpinning microbial food webs. IMPORTANCE Cyanobacteria are important primary producers in aquatic environments, where they are grazed upon by a variety of phagotrophic protists and, hence, have an impact on nutrient flux at the base of microbial food webs. Here, we characterize amoebal isolate LPG3, which consumes cyanobacteria as its primary food source but also requires heterotrophic bacteria as a source of corrinoid vitamins. Amoeba LPG3 specifically requires the corrinoid variant produced by heterotrophic bacteria and cannot grow on cyanobacteria alone, as they produce a different corrinoid variant. This same corrinoid specificity is also

Market outlook for Australian uranium producers

International Nuclear Information System (INIS)

Lindsay, M.

2001-01-01

Recent improvements in the uranium market and political changes in Australia presented the uranium producers with their best opportunity in over 15 years. The removal of the well known 'three mines policy' by the current government has encouraged Australian producers to develop new development plans. With the expansion of the existing operations at Ranger and Olympic Dam, and the potential operations of Jabiluka, Kintyre, Koongara, Honeymoon and Beverley, Australia expects to increase annual production to 11630 t U 3 O 8 by the end of the decade. It will then join Canada as a major supplier of uranium to the world's nuclear power utilities in the 21st century. Uranium exploration, which has been virtually nonexistent over the past 15 years, has once again been reactivated. This occurred because of the change in the Government, but also because the Aboriginal groups are once more allowing exploration on their land. (author)

Systemic responses of barley to the 3-hydroxy-decanoyl-homoserine lactone producing plant beneficial endophyte Acidovorax radicis N35

Directory of Open Access Journals (Sweden)

Shengcai Han

2016-12-01

Full Text Available Quorum sensing auto-inducers of the N-acyl homoserine lactone (AHL type produced by Gram-negative bacteria have different effects on plants including stimulation on root growth and/or priming or acquirement of systemic resistance in plants. In this communication the influence of AHL production of the plant growth promoting endophytic rhizosphere bacterium Acidovorax radicis N35 on barley seedlings was investigated. A. radicis N35 produces 3-hydroxy-C10-homoserine lactone (3-OH-C10-HSL as the major AHL compound. To study the influence of this QS autoinducer on the interaction with barley, the araI-biosynthesis gene was deleted. The comparison of inoculation effects of the A. radicis N35 wild type and the araI mutant resulted in remarkable differences. While the N35 wild type colonized plant roots effectively in microcolonies, the araI mutant occurred at the root surface as single cells. Furthermore, in a mixed inoculum the wild type was much more prevalent in colonization than the araI mutant documenting that the araI mutation affected root colonization. Nevertheless, a significant plant growth promoting effect could be shown after inoculation of barley with the wild type and the araI mutant in soil after two months cultivation. While A. radicis N35 wild type showed only a very weak induction of early defense responses in plant RNA expression analysis, the araI mutant caused increased expression of flavonoid biosynthesis genes. This was corroborated by the accumulation of several flavonoid compounds such as saponarin and lutonarin in leaves of root inoculated barley seedlings. Thus, although the exact role of the flavonoids in this plant response is not clear yet, it can be concluded, that the synthesis of AHLs by A. radicis has implications on the perception by the host plant barley and thereby contributes to the establishment and function of the bacteria-plant interaction.

Study of the kinetics and morphology of immune reaction spleen cells by immunocytoadherence method. IV

International Nuclear Information System (INIS)

Blazek, J.

1976-01-01

The course of immunocytoadherence was followed in the mouse spleen during primary immune response to intraperitoneal administration of sheep erythrocytes at 24 hours, 72 hours and 6 days following whole-body irradiation with a dose of 450 R after antigen administration. The number of RFC becomes reduced immediately after irradiation. The reduction thereof always correlates with a relative increase of macrophages. Small and medium-sized lymphocytes rapidly disappear from the population of rosette-forming cells. If the irradiation had been carried out before the radiation-uninfluenced reaction reached its maximum, the large lymphocytes relatively increase in number. In other cases their immunocytoadherent activity also shows a steadily decreasing tendency. During the primary reaction, irradiation always increases the total relative plasma cell count as related to the other RFC. In such cases the proportion of mature forms is larger than of blastic forms. The values observed at the end of the studied postirradiation period in the course of the primary reaction are always characterized by a higher proportion of the plasma cell line after about 20 to 25 days. (author)

dCache: implementing a high-end NFSv4.1 service using a Java NIO framework

CERN Multimedia

CERN. Geneva

2012-01-01

dCache is a high performance scalable storage system widely used by HEP community. In addition to set of home grown protocols we also provide industry standard access mechanisms like WebDAV and NFSv4.1. This support places dCache as a direct competitor to commercial solutions. Nevertheless conforming to a protocol is not enough; our implementations must perform comparably or even better than commercial systems. To achieve this, dCache uses two high-end IO frameworks from well know application servers: GlassFish and JBoss. This presentation describes how we implemented an rfc1831 and rfc2203 compliant ONC RPC (Sun RPC) service based on the Grizzly NIO framework, part of the GlassFish application server. This ONC RPC service is the key component of dCache’s NFSv4.1 implementation, but is independent of dCache and available for other projects. We will also show some details of dCache NFS v4.1 implementations, describe some of the Java NIO techniques used and, finally, present details of our performance e...

Security Analysis of DTN Architecture and Bundle Protocol Specification for Space-Based Networks

Science.gov (United States)

Ivancic, William D.

2009-01-01

A Delay-Tolerant Network (DTN) Architecture (Request for Comment, RFC-4838) and Bundle Protocol Specification, RFC-5050, have been proposed for space and terrestrial networks. Additional security specifications have been provided via the Bundle Security Specification (currently a work in progress as an Internet Research Task Force internet-draft) and, for link-layer protocols applicable to Space networks, the Licklider Transport Protocol Security Extensions. This document provides a security analysis of the current DTN RFCs and proposed security related internet drafts with a focus on space-based communication networks, which is a rather restricted subset of DTN networks. Note, the original focus and motivation of DTN work was for the Interplanetary Internet . This document does not address general store-and-forward network overlays, just the current work being done by the Internet Research Task Force (IRTF) and the Consultative Committee for Space Data Systems (CCSDS) Space Internetworking Services Area (SIS) - DTN working group under the DTN and Bundle umbrellas. However, much of the analysis is relevant to general store-and-forward overlays.

A Mechanically Proved and an Incremental Development of the Session Initiation Protocol INVITE Transaction

Directory of Open Access Journals (Sweden)

Rajaa Filali

2014-01-01

Full Text Available The Session Initiation Protocol (SIP is an application layer signaling protocol used to create, manage, and terminate sessions in an IP based network. SIP is considered as a transactional protocol. There are two main SIP transactions, the INVITE transaction and the non-INVITE transaction. The SIP INVITE transaction specification is described in an informal way in Request for Comments (RFC 3261 and modified in RFC 6026. In this paper we focus on the INVITE transaction of SIP, over reliable and unreliable transport mediums, which is used to initiate a session. In order to ensure the correctness of SIP, the INVITE transaction is modeled and verified using event-B method and its Rodin platform. The Event-B refinement concept allows an incremental development by defining the studied system at different levels of abstraction, and Rodin discharges almost all proof obligations at each level. This interaction between modeling and proving reduces the complexity and helps in assuring that the INVITE transaction SIP specification is correct, unambiguous, and easy to understand.

Relative ion expansion velocity in laser-produced plasmas

International Nuclear Information System (INIS)

Goldsmith, S.; Moreno, J.C.; Griem, H.R.; Cohen, L.; Richardson, M.C.

1988-01-01

The spectra of highly ionized titanium, TiXIII through TiXXI, and CVI Lyman lines were excited in laser-produced plasmas. The plasma was produced by uniformly irradiating spherical glass microballoons coated with thin layers of titanium and parylene. The 24-beam Omega laser system produced short, 0.6 ns, and high intensity, 4 x 10 14 W/cm, 2 laser pulses at a wavelength of 351 nm. The measured wavelength for the 2p-3s TiXIII resonance lines had an average shift of +0.023 A relative to the CVI and TiXX spectral lines. No shift was found between the CVI, TiXIX, and TiXX lines. The shift is attributed to a Doppler effect, resulting from a difference of (2.6 +- 0.2) x 10 7 cm/s in the expansion velocities of TiXIX and TiXX ions compared to TiXIII ions

OZONE TREATMENT OF SOLUBLE ORGANICS IN PRODUCED WATER

Energy Technology Data Exchange (ETDEWEB)

Klasson, KT

2002-03-14

This project was an extension of previous research to improve the applicability of ozonation and will help address the petroleum-industry problem of treating produced water containing soluble organics. The goal of this project was to maximize oxidation of hexane-extractable organics during a single-pass operation. The project investigated: (1) oxidant production by electrochemical and sonochemical methods, (2) increasing the mass transfer rate in the reactor by forming microbubbles during ozone injection into the produced water, and (3) using ultraviolet irradiation to enhance the reaction if needed. Several types of methodologies for treatment of soluble organics in synthetic and actual produced waters have been performed. The technologies tested may be categorized as follows: (1) Destruction via sonochemical oxidation at different pH, salt concentration, ultraviolet irradiation, and ferrous iron concentrations. (2) Destruction via ozonation at different pH, salt concentration, hydrogen peroxide concentrations, ultraviolet irradiation, temperature, and reactor configurations.

7 CFR 170.2 - Is the USDA Farmers Market a producer-only market?

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Is the USDA Farmers Market a producer-only market? 170...) MISCELLANEOUS MARKETING PRACTICES UNDER THE AGRICULTURAL MARKETING ACT OF 1946 USDA FARMERS MARKET § 170.2 Is the USDA Farmers Market a producer-only market? Yes. A producer-only market is one that does not offer...

The behavior of lattice defects produced in Al{sub 2}O{sub 3} irradiated by neutrons at high temperatures

Energy Technology Data Exchange (ETDEWEB)

Atobe, K.; Koizumi, T. [Naruto Univ. of Education, Tokushima (Japan); Okada, M. [Kyoto Univ., Research Reactor Inst., Kumatori, Osaka (Japan)

2003-01-01

Single crystals of {alpha}-Al{sub 2}O{sub 3} were irradiated by the two reactors, KUR and JMTR, at three different temperatures. Lattice defects produced by irradiation were studied by esr (electron spin resonance). Three kinds of esr spectram, which are denoted as A, B and C spectram, are observed. The spectram A was observed at three different irradiation temperatures and was ascribed to oxygen vacancies. The spectram B showed no angular dependence for the rotation of external magnetic field to the crystal axis, and the defect density of this spectram decreased with an increase of annealing temperature. When the specimen was annealed at 400 degC after irradiation at 200 degC, the spectram C was observed and was presumed to be due to Al-colloids. (Y. Kazumata)

Strengthening analyses and mechanical assessment of Ti/Al{sub 2}O{sub 3} nano-composites produced by friction stir processing

Energy Technology Data Exchange (ETDEWEB)

Shafiei-Zarghani, Aziz, E-mail: ashafiei@ut.ac.ir [Center of Excellence for Surface Engineering and Corrosion Protection of Industries, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); Kashani-Bozorg, Seyed Farshid, E-mail: fkashani@ut.ac.ir [Center of Excellence for Surface Engineering and Corrosion Protection of Industries, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); Gerlich, Adrian P., E-mail: adrian.gerlich@uwaterloo.ca [Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo (Canada)

2015-04-17

The present work investigates strengthening mechanisms and mechanical assessment of Ti/Al{sub 2}O{sub 3} nano-composites produced by friction stir processing of commercially pure titanium using nano-sized Al{sub 2}O{sub 3} with different volume fractions and particle sizes. Microstructural analyses were conducted to characterize the grain size of matrix, size and dispersion of reinforcing particles. The mean grain size of the composites ranged from ~0.7 to 1.1 μm that is much lower than 28 μm of the as-received material. Reduction of grain size was found to be in agreement with Rios approach (based on energy dissipated during the motion of an interface through particle dispersion), and showed deviation from Zener pinning model. Scanning and transmission electron microscopies revealed a near uniform dispersion of Al{sub 2}O{sub 3} nano-particles, with only a small fraction of widely spaced clusters. The maximum compression yield strength of the fabricated nano-composite (Ti/3.9%vol of 20 nm-Al{sub 2}O{sub 3}) was found to be ~494 MPa that is ~1.5 times higher than that of the as-received material. Strengthening analyses based on grain refining (Hall–Petch approach), load transfer from matrix to reinforcements, Orowan looping, and enhanced dislocation density due to thermal mismatch effects were carried out considering Al{sub 2}O{sub 3} reinforcement with different volume fractions and sizes. However, Hall–Petch approach was found to be the dominant mechanism for the enhancement of yield strength.

Bioavailability of isoflavones from soy products in equol producers and non-producers in Japanese women

Directory of Open Access Journals (Sweden)

Ayako Miura

2016-12-01

Conclusions: The results in this study suggest that bioavailability of isoflavones are different between equol producers and non-producers, because the 24 h urinary excretion of equol in the equol producers were significantly lower than those in the equol non-producers.

Does 3D produce more symptoms of visually induced motion sickness?

Science.gov (United States)

Naqvi, Syed Ali Arsalan; Badruddin, Nasreen; Malik, Aamir Saeed; Hazabbah, Wan; Abdullah, Baharudin

2013-01-01

3D stereoscopy technology with high quality images and depth perception provides entertainment to its viewers. However, the technology is not mature yet and sometimes may have adverse effects on viewers. Some viewers have reported discomfort in watching videos with 3D technology. In this research we performed an experiment showing a movie in 2D and 3D environments to participants. Subjective and objective data are recorded and compared in both conditions. Results from subjective reporting shows that Visually Induced Motion Sickness (VIMS) is significantly higher in 3D condition. For objective measurement, ECG data is recorded to find the Heart Rate Variability (HRV), where the LF/HF ratio, which is the index of sympathetic nerve activity, is analyzed to find the changes in the participants' feelings over time. The average scores of nausea, disorientation and total score of SSQ show that there is a significant difference in the 3D condition from 2D. However, LF/HF ratio is not showing significant difference throughout the experiment.

Characterization of new exopolysaccharides produced by coculturing of L. kefiranofaciens with yoghurt strains.

Science.gov (United States)

Ahmed, Zaheer; Wang, Yanping; Anjum, Nomana; Ahmad, Hajra; Ahmad, Asif; Raza, Mohsin

2013-08-01

This project was designed to study the coculturing affect of exopolysaccharide (EPS) producing strains Lactobacillus kefiranofaciens (L.k) ZW3, with non EPS producing strains L. bulgaricus (L.b) and Streptococcus thermophilus (S.t) in three different combinations: L.k+L.b, L.k+S.t, and L.k+L.b+S.t. FTIR analysis revealed presence of strong stretch in regions of 3400, 2900 and 1647cm(-1) which is characteristic of a typical polysaccharide. Co-cultured EPSs were composed of glucose, galactose, arabinose and xylose; and their sugar compositions were different from ZW3 polysaccharide that was mainly composed of gluco-galactan. Peak temperature for L.k+L.b, L.k+S.t, L.k+S.t+L.b and ZW3 polymers were 90.59, 87.61, 95.18 and 97.38°C, respectively. Thermal analysis revealed degradation temperature of 326.44, 294.6, 296.7 and 299.62°C for L.k+L.b, L.k+S.t, L.k+S.t+L.b and ZW3 polymers, respectively. SEM and AFM analysis divulged that three cocultured EPSs had different surface morphology than ZW3 polymer. Since co-cultured polymers have different structure than the polymer produced exclusively by EPS producing strain, it can be safely concluded from the study that co-culturing can be one way to change the structure of polymers. Coculturing of L. kefiranofaciens with non-EPS producing strains resulted in yoghurt with increased viscosity and delayed syneresis. Copyright © 2013 Elsevier B.V. All rights reserved.

Prevalence and characterization of ESBL- and AmpC-producing Enterobacteriaceae on retail vegetables.

Science.gov (United States)

van Hoek, Angela H A M; Veenman, Christiaan; van Overbeek, Wendy M; Lynch, Gretta; de Roda Husman, Ana Maria; Blaak, Hetty

2015-07-02

In total 1216 vegetables obtained from Dutch stores during 2012 and 2013 were analysed to determine the prevalence of 3rd-generation cephalosporin (3GC) resistant bacteria on soil-grown fresh produce possibly consumed raw. Vegetables grown conventionally and organically, from Dutch as well as foreign origin were compared. Included were the following vegetable types; blanched celery (n=192), bunched carrots (n=190), butterhead lettuce (n=137), chicory (n=96), endive (n=188), iceberg lettuce (n=193) and radish (n=120). Overall, 3GC-resistant Enterobacteriaceae were detected on 5.2% of vegetables. Based on primary habitat and mechanism of 3GC-resistance, these bacteria could be divided into four groups: ESBL-producing faecal species (Escherichia coli, Enterobacter spp.), AmpC-producing faecal species (Citrobacter freundii, Enterobacter spp.), ESBL-producing environmental species (Pantoea spp., Rahnella aquatilis, Serratia fonticola), and AmpC-producing environmental species (Cedecca spp., Hafnia alvei, Pantoea spp., Serratia plymuthica), which were detected on 0.8%, 1.2%, 2.6% and 0.4% of the vegetables analysed, respectively. Contamination with faecal 3GC-resistant bacteria was most frequently observed in root and bulb vegetables (average prevalence 4.4%), and less frequently in stem vegetables (prevalence 1.6%) and leafy greens (average prevalence 0.6%). In Dutch stores, only four of the included vegetable types (blanched celery, bunched carrots, endive, iceberg lettuce) were available in all four possible variants: Dutch/conventional, Dutch/organic, foreign/conventional, foreign/organic. With respect to these vegetable types, no statistically significant difference was observed in prevalence of 3GC-resistant Enterobacteriaceae between country of origin or cultivation type (5.2%, 5.7%, 5.7% and 3.3%, respectively). Vegetables consumed raw may be a source of dissemination of 3GC-resistant Enterobacteriaceae and their resistance genes to humans. The magnitude of the

Carbonate and carbon isotopic evolution of groundwater contaminated by produced water brine with hydrocarbons

International Nuclear Information System (INIS)

Atekwana, Eliot A.; Seeger, Eric J.

2015-01-01

The major ionic and dissolved inorganic carbon (DIC) concentrations and the stable carbon isotope composition of DIC (δ"1"3C_D_I_C) were measured in a freshwater aquifer contaminated by produced water brine with petroleum hydrocarbons. Our aim was to determine the effects of produced water brine contamination on the carbonate evolution of groundwater. The groundwater was characterized by three distinct anion facies: HCO_3"−-rich, SO_4"2"−-rich and Cl"−-rich. The HCO_3"−-rich groundwater is undergoing closed system carbonate evolution from soil CO_2_(_g_) and weathering of aquifer carbonates. The SO_4"2"−-rich groundwater evolves from gypsum induced dedolomitization and pyrite oxidation. The Cl"−-rich groundwater is contaminated by produced water brine and undergoes common ion induced carbonate precipitation. The δ"1"3C_D_I_C of the HCO_3"−-rich groundwater was controlled by nearly equal contribution of carbon from soil CO_2_(_g_) and the aquifer carbonates, such that the δ"1"3C of carbon added to the groundwater was −11.6‰. In the SO_4"2"−-rich groundwater, gypsum induced dedolomitization increased the "1"3C such that the δ"1"3C of carbon added to the groundwater was −9.4‰. In the produced water brine contaminated Cl"−-rich groundwater, common ion induced precipitation of calcite depleted the "1"3C such that the δ"1"3C of carbon added to the groundwater was −12.7‰. The results of this study demonstrate that produced water brine contamination of fresh groundwater in carbonate aquifers alters the carbonate and carbon isotopic evolution. - Highlights: • We studied carbonate and δ"1"3C evolution in groundwater contaminated by produced water brine. • Multiple processes affect the carbonate and δ"1"3C evolution of the groundwater. • The processes are carbonate weathering, dedolomitization and common ion induce calcite precipitation. • The δ"1"3C added to DIC was −11.6‰ for weathering, −9.4‰ for dedolomitization

Acetate enhances startup of a H₂-producing microbial biocathode.

Science.gov (United States)

Jeremiasse, Adriaan W; Hamelers, Hubertus V M; Croese, Elsemiek; Buisman, Cees J N

2012-03-01

H(2) can be produced from organic matter with a microbial electrolysis cell (MEC). To decrease MEC capital costs, a cathode is needed that is made of low-cost material and produces H(2) at high rate. A microbial biocathode is a low-cost candidate, but suffers from a long startup and a low H(2) production rate. In this study, the effects of cathode potential and carbon source on microbial biocathode startup were investigated. Application of a more negative cathode potential did not decrease the startup time of the biocathode. If acetate instead of bicarbonate was used as carbon source, the biocathode started up more than two times faster. The faster startup was likely caused by a higher biomass yield for acetate than for bicarbonate, which was supported by thermodynamic calculations. To increase the H(2) production rate, a flow through biocathode fed with acetate was investigated. This biocathode produced 2.2 m(3) H(2) m(-3)  reactor day(-1) at a cathode potential of -0.7 V versus NHE, which was seven times that of a parallel flow biocathode of a previous study. Copyright © 2011 Wiley Periodicals, Inc.

Potency of Amylase-producing Bacteria and Optimization Amylase Activities

Science.gov (United States)

Indriati, G.; Megahati, R. R. P.; Rosba, E.

2018-04-01

Enzymes are capable to act as biocatalyst for a wide variety of chemical reactions. Amylase have potential biotechnological applications in a wide range of industrial processes and account for nearly 30% of the world’s enzyme market. Amylase are extracellular enzymes that catalyze the hydrolysis of internal α-1,4-glycosidic linkages in starch to dextrin, and other small carbohydrate molecules constituted of glucose units. Although enzymes are produced from animal and plant sources, the microbial sources are generally the most suitable for commercial applications. Bacteria from hot springs is widely used as a source of various enzymes, such as amylase. But the amount of amylase-producing bacteria is still very limited. Therefore it is necessary to search sources of amylase-producing bacteria new, such as from hot springs Pariangan. The purpose of this study was to isolation of amylase-producing bacteria from Pariangan hot spring, West Sumatera and amylase activity optimization. The results were obtained 12 isolates of thermophilic bacteria and 5 isolates of amyalse-producing bacteria with the largest amylolytic index of 3.38 mm. The highest amylase activity was obtained at 50°C and pH 7.5.

A comparative study on microstructure and tribological properties of Si3N4 and TiN thin films produced by IBED method

International Nuclear Information System (INIS)

Zhuang Daming; Liu Jiajun; Zhu Baoliang; Li Wenzhi; Zhang Xushou; Yang Shengrong

1995-01-01

In this paper, the tribological properties of Si 3 N 4 and TiN thin films produced by ion beam enhanced deposition (IBED) method were compared on an SRV friction and wear testing machine. In order to understand the reasons of their excellent properties the microstructure, microhardness and bonding strength with the substrate were analysed by SEM, X-ray diffraction, Knoop hardness test and scratching test methods separately. The results show that the TiN(1) films exhibits the best tribological properties, which are closely related with its higher hardness and bonding strength. (author)

Preparation of cyclotron-produced {sup 186}Re and comparison with reactor-produced {sup 186}Re and generator-produced {sup 188}Re for the labeling of bombesin

Energy Technology Data Exchange (ETDEWEB)

Moustapha, Moustapha E. [Department of Chemistry, University of Missouri-Columbia, Columbia, MO 65211 (United States); University of Missouri Research Reactor (MURR), University of Missouri-Columbia, Columbia, MO 65211 (United States); Ehrhardt, Gary J. [Department of Chemistry, University of Missouri-Columbia, Columbia, MO 65211 (United States); University of Missouri Research Reactor (MURR), University of Missouri-Columbia, Columbia, MO 65211 (United States); Smith, Charles J. [Department of Radiology, University of Missouri-Columbia, Columbia, MO 65211 (United States); University of Missouri Research Reactor (MURR), University of Missouri-Columbia, Columbia, MO 65211 (United States); Research Services, Harry S. Truman Memorial Veterans' Hospital, Columbia, MO 65201 (United States); Szajek, Lawrence P. [Positron Emission Tomography Department, National Institutes of Health, Bethesda, MD 20892-1180 (United States); Eckelman, William C. [Positron Emission Tomography Department, National Institutes of Health, Bethesda, MD 20892-1180 (United States); Jurisson, Silvia S. [Department of Chemistry, University of Missouri-Columbia, Columbia, MO 65211 (United States)]. E-mail: jurissons@missouri.edu

2006-01-15

The radioisotopes {sup 186}Re and {sup 188}Re have been extensively investigated for various forms of radiotherapy due to their useful and high-abundance {beta} particle emissions, low-abundance and imageable {gamma}-rays, and chemical resemblance to technetium. In addition, {sup 188}Re is available in no-carrier-added (NCA) form from long lived W-188 generators, whereas {sup 186}Re can be produced in large quantities from reactors, although not in NCA form. However, NCA {sup 186}Re can be produced on a cyclotron by a (p,n) reaction on {sup 186}W. The purpose of this study was to compare labeling of the peptide bombesin with these three forms of rhenium radioisotopes. Cyclotron-produced NCA {sup 186}Re was separated radiochemically from enriched {sup 186}W (96.9%) targets using high-purity methyl ethyl ketone (MEK). The resulting {sup 186}Re-MEK was then loaded onto a small alumina column to separate the resulting NCA {sup 186}Re from any remaining {sup 186}W. The experimental levels of impurities associated with {sup 186}Re at the end of the separation process were found to be 5.7x10{sup -6} Ci of {sup 182}Re (0.57%, t {sub 1/2}=12.7 h) and 1.283x10{sup -5} Ci of {sup 182m}Re (1.28%, t {sub 1/2}=2.67 days). The radionuclidic purity of the separated {sup 186}Re was found to be 99.6%, whereas the chemical identity was determined by reversed phase high-performance liquid chromatography (RP-HPLC) to be perrhenate ({sup 186}ReO{sub 4} {sup -}). Generator-produced {sup 188}ReO{sub 4} {sup -} from a {sup 188}W/{sup 188}Re generator (Oak Ridge National Laboratory) and CA {sup 186}ReO{sub 4} {sup -} produced from a {sup 185}Re(n,{gamma}){sup 186}Re reaction at the University of Missouri Research Reactor (MURR) were used for comparison with the NCA {sup 186}Re in subsequent studies. N{sub 3}S-5-Ava-BBN(7-14)NH{sub 2} conjugates provide flexibility for designing {sup 186,188}Re-labeled conjugates that retain high in vitro and in vivo specificity targeting of GRP receptor

Brookhaven Linac Isotope Producer

Data.gov (United States)

Federal Laboratory Consortium — The Brookhaven Linac Isoptope Producer (BLIP)—positioned at the forefront of research into radioisotopes used in cancer treatment and diagnosis—produces commercially...

Design of a head phantom produced on a 3D rapid prototyping printer and comparison with a RANDO and 3M lucite head phantom in eye dosimetry applications.

Science.gov (United States)

Homolka, Peter; Figl, Michael; Wartak, Andreas; Glanzer, Mathias; Dünkelmeyer, Martina; Hojreh, Azadeh; Hummel, Johann

2017-04-21

An anthropomorphic head phantom including eye inserts allowing placement of TLDs 3 mm below the cornea has been produced on a 3D printer using a photo-cured acrylic resin to best allow tissue equivalence. Thus H p (3) can be determined in radiological and interventional photon radiation fields. Eye doses and doses to the forehead have been compared to an Alderson RANDO head and a 3M Lucite skull phantom in terms of surface dose per incident air kerma for frontal irradiation since the commercial phantoms do not allow placement of TLDs 3 mm below the corneal surface. A comparison of dose reduction factors (DRFs) of a common lead glasses model has also been performed. Eye dose per incident air kerma were comparable between all three phantoms (printed phantom: 1.40, standard error (SE) 0.04; RANDO: 1.36, SE 0.03; 3M: 1.37, SE 0.03). Doses to the forehead were identical to eye surface doses for the printed phantom and the RANDO head (ratio 1.00 SE 0.04, and 0.99 SE 0.03, respectively). In the 3M Lucite skull phantom dose on the forehead was 15% lower than dose to the eyes attributable to phantom properties. DRF of a sport frame style leaded glasses model with 0.75 mm lead equivalence measured were 6.8 SE 0.5, 9.3 SE 0.4 and 10.5 SE 0.5 for the RANDO head, the printed phantom, and the 3M Lucite head phantom, respectively, for frontal irradiation. A comparison of doses measured in 3 mm depth and on the surface of the eyes in the printed phantom revealed no difference larger than standard errors from TLD dosimetry. 3D printing offers an interesting opportunity for phantom design with increasing potential as printers allowing combinations of tissue substitutes will become available. Variations between phantoms may provide a useful indication of uncertainty budgets when using phantom measurements to estimate individual personnel doses.

7 CFR 760.1103 - Eligible livestock and producers.

Science.gov (United States)

2010-01-01

... dairy cattle, beef cattle, buffalo, beefalo, equine, poultry, elk, reindeer, sheep, goats, swine, or... period; (3) Been maintained for commercial use as part of the producer's farming operation on the... commercial use as part of a farming operation. Such excluded uses include, but are not limited to, wild free...

Manufacturer Usage Description Specification Implementation

OpenAIRE

Srinivasan, Kaushik

2017-01-01

Manufacturer Usage Description Specification (MUDS) is aframework under RFC development that aims to automate Internet access control rules for IoT devices . These access controls prevent malicious IoT devices from attacking other devices and also protect the IoT devices from being attacked by other devices.We are implementing this framework and trying to improve its security.

Intramolecular hydrogen bond: Can it be part of the basis set of ...

Indian Academy of Sciences (India)

However, we know that IMHB is a weak bond and hence its RFC has to be a measure of bond strength. .... oxalic acid, 1,4-butanediol, and 1,2-ethanediol, where .... −59.0. −56.2. −62.8. −165.8 −59.4 −179.4 −170.9. Relative energies∗∗. HF.

Swallows Rugby Football Club, South Africa: The story of a century ...

African Journals Online (AJOL)

This paper aims to deconstruct and isolate a century-long story of the Swallows RFC from a multifarious Xhosa and black peoplees rugby history and locate it in the epicentre of research in the country. This Club was established in 1911 at the East Bank Location (EBL) of East London, in the present day Eastern Cape ...

Methionine synthase A2756G and reduced folate carrier1 A80G ...

African Journals Online (AJOL)

Aim of the study: To analyze the effect of methionine synthase (MTR) A2756G, and reduced folate carrier (RFC1) A80G gene polymorphisms on the maternal risk for DS. Patients: This study was conducted in the Medical Genetics Center, Ain-Shams University hospitals, on a total of 170 mothers of children, diagnosed with ...

COMPARATIVE ANALYSIS OF OXALIC ACID PRODUCED FROM RICE HUSK AND PADDY

OpenAIRE

P.I. Oghome; K.O.Amanze; C.I.O.Kamalu; A.C Nkwocha; S.O.Opebiyi

2012-01-01

In this research work, comparative analysis of Oxalic acid produced from Rice husk and Paddy was carried out in order to ascertain which waste sample produced a better yield. Nitric acid oxidation of carbohydrates was the method adopted in the production. The variable ratios of HNO3:H2SO4 used were 80:20, 70:30, 60:40, and 50:50. The variable ratio of 60:40 gave the maximum yield and at a maximum temperature of 75oC. Rice husk sample gave a percentage yield of 53.2, 64.4, 81.0, and 53.3 at te...

A new method to produce nanoscale iron for nitrate removal

International Nuclear Information System (INIS)

Chen, S.-S.; Hsu, H.-D.; Li, C.-W.

2004-01-01

This article proposes a novel technology combining electrochemical and ultrasonic methods to produce nanoscale zero valent iron (NZVI). With platinum placed in the cathode and the presence of the dispersion agent, 0.2g/l cetylpyridinium chloride (CPC), a cation surfactant, in the solution, the nanoscale iron particle was successfully produced with diameter of 1-20 nm and specific surface area of 25.4m 2 /g. The produced NZVI was tested in batch experiments for nitrate removal. The results showed that the nitrate reduction was affected by pH. Al low pH, nitrate was shown faster decline and more reduction in term of g NO 3 - -N/g NZVI. The reaction was first order and kinetic coefficients for the four pHs were directly related to pH with R 2 >0.95. Comparing with microscale zero-valent iron (45μm, 0.183m 2 /g), microscale zero-valent iron converted nitrate to ammonia completely, but NZVI converted nitrate to ammonia partially from 36.2 to 45.3% dependent on pH. For mass balance of iron species, since the dissolved iron in the solution was very low ( 2 O 3 was recognized. Thus the reaction mechanisms can be determined

Methods of producing alkylated hydrocarbons from an in situ heat treatment process liquid

Science.gov (United States)

Roes, Augustinus Wilhelmus Maria [Houston, TX; Mo, Weijian [Sugar Land, TX; Muylle, Michel Serge Marie [Houston, TX; Mandema, Remco Hugo [Houston, TX; Nair, Vijay [Katy, TX

2009-09-01

A method for producing alkylated hydrocarbons is disclosed. Formation fluid is produced from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes olefins. The liquid stream is fractionated to produce at least a second gas stream including hydrocarbons having a carbon number of at least 3. The first gas stream and the second gas stream are introduced into an alkylation unit to produce alkylated hydrocarbons. At least a portion of the olefins in the first gas stream enhance alkylation.

Characterization of N-Acylhomoserine Lactones Produced by Bacteria Isolated from Industrial Cooling Water Systems

Directory of Open Access Journals (Sweden)

Noriya Okutsu

2015-12-01

Full Text Available The cooling water systems are used to remove heat generated in the various industries. Biofouling of the cooling water systems causes blocking of condenser pipes and the heat exchanger tubes. In many Gram-negative bacteria, N-acylhomoserine lactone (AHL are used as quorum-sensing signal molecule and associated with biofilm formation. To investigate the relationship between quorum sensing and biofouling in the cooling water system, we isolated a total of 192 bacterial strains from the five cooling water systems, and screened for AHL production. Seven isolates stimulated AHL-mediated purple pigment production in AHL reporter strain Chromobacterium violaceum CV026 or VIR07. Based on their 16S rRNA gene sequences, AHL-producing isolates were assigned to Aeromonas hydrophila, Lysobacter sp., Methylobacterium oryzae, and Bosea massiliensis. To the best of our knowledge, B. massiliensis and Lysobacter sp. have not been reported as AHL-producing species in the previous researches. AHLs extracted from the culture supernatants of B. massiliensis and Lysobacter sp. were identified by liquid chromatography-mass spectrometry. AHLs produced by B. massiliensis were assigned as N-hexanoyl-l-homoserine lactone (C6-HSL, N-(3-oxohexanoyl-l-homoserine lactone (3-oxo-C6-HSL, and N-(3-oxooctanoyl-l-homoserine lactone (3-oxo-C8-HSL. AHLs produced by Lysobacter sp. were assigned as N-decanoyl-l-homoserine lactone (C10-HSL and N-(3-oxodecanoyl-l-homoserine lactone (3-oxo-C10-HSL. This is the first report of identification of AHLs produced by B. massiliensis and Lysobacter sp. isolated from the cooling water system.

A mesophilic Clostridium species that produces butanol from monosaccharides and hydrogen from polysaccharides.

Science.gov (United States)

Bramono, Sandhi Eko; Lam, Yuen Sean; Ong, Say Leong; He, Jianzhong

2011-10-01

A unique mesophilic Clostridium species strain BOH3 is obtained in this study, which is capable of fermenting monosaccharides to produce butanol and hydrolyzing polysaccharides to produce hydrogen (H(2)) and volatile fatty acids (VFAs). From 30 g/L of glucose and xylose each, batch culture BOH3 was able to produce 4.67 and 4.63 g/L of butanol. Enhancement treatments by increasing the inoculated cells improved butanol production to 7.05 and 7.41 g/L, respectively. Hydrogen production (2.47 and 1.93 mmol) was observed when cellulose and xylan (10 g/L each) were used, suggesting that strain BOH3 possesses xylanolytic and cellulolytic capabilities. These unique features reveal the strain's novelty as most wild-type solventogenic strains have not been reported to have such properties. Therefore, culture BOH3 is promising in generating butanol and hydrogen from renewable feedstock. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Isolation of gallic acid-producing microorganisms and their use in ...

African Journals Online (AJOL)

A total number of eighty gallic acid producing strains were isolated from forest soil or plant samples. Among these strains, thirteen isolates were selected for gallic acid production and these isolates were Aspergillus niger 1, A. niger 2, A. niger 3, Penicillium canescens (3), P. frequentans (2), P. spinulosum (2), ...

Microbial oxidation of soluble sulfide in produced water from the Bakkeen Sands

Energy Technology Data Exchange (ETDEWEB)

Gevertz, D.; Zimmerman, S. [Agouron Institute, La Jolla, CA (United States); Jenneman, G.E. [Phillips Petroleum Company, Bartlesville, OK (United States)] [and others

1995-12-31

The presence of soluble sulfide in produced water results in problems for the petroleum industry due to its toxicity, odor, corrosive nature, and potential for wellbore plugging. Sulfide oxidation by indigenous nitrate-reducing bacteria (NRB) present in brine collected from wells at the Coleville Unit (CVU) in Saskatchewan, Canada, was investigated. Sulfide oxidation took place readily when nitrate and phosphate were added to brine enrichment cultures, resulting in a decrease in sulfide levels of 99-165 ppm to nondetectable levels (< 3.3 ppm). Produced water collected from a number of producing wells was screened to determine the time required for complete sulfide oxidation, in order to select candidate wells for treatment. Three wells were chosen, based on sulfide removal in 48 hours or less. These wells were treated down the backside of the annulus with a solution containing 10 mM KNO{sub 3} and 100 {mu}M NaH{sub 2}PO{sub 4}. Following a 24- to 72-hour shut-in, reductions in pretreatment sulfide levels of greater than 90% were observed for two of the wells, as well as sustained sulfide reductions of 50% for at least two days following startup. NRB populations in the produced brine were observed to increase significantly following treatment, but no significant increases in sulfate-reducing bacteria were observed. These results demonstrate the technical feasibility of stimulating indigenous populations of NRB to remediate and control sulfide in produced brine.

Beta-Lactamase Producing Escherichia coli Isolates in Imported and Locally Produced Chicken Meat from Ghana.

Science.gov (United States)

Rasmussen, Mette Marie; Opintan, Japheth A; Frimodt-Møller, Niels; Styrishave, Bjarne

2015-01-01

The use of antibiotics in food animals is of public health concern, because resistant zoonotic pathogens can be transmitted to humans. Furthermore, global trade with food may rapidly spread multi-resistant pathogens between countries and even continents. The purpose of the study was to investigate whether imported chicken meat and meat from locally reared chicken are potential sources for human exposure to multi resistant Escherichia coli isolates. 188 samples from imported and locally produced chicken meat were sampled and analyzed. 153 bacteria isolates were successfully cultured and identified as E. coli using MALDI-ToF. Of these 109 isolates were from meat whereas the remaining 44 were isolated from the cloaca of locally reared live chickens. Antimicrobial susceptibility test was done on the identified E. coli isolates. Additionally, beta-lactamases production (ESBL and/or AmpC) were phenotypically confirmed on all isolates showing resistance to cefpodoxime. Beta-lactamase producing (BLP) E. coli meat isolates were further genotyped. Antimicrobial resistance to four antibiotic markers with highest resistance was detected more frequently in isolates from local chickens compared to imported chickens (tetracycline 88.9% vs. 57.5%, sulphonamide 75.0% vs. 46.6%, ampicillin 69.4% vs. 61.6% and trimethoprim 66.7% vs. 38.4%). Beta-lactamase production was found in 29 E. coli meat isolates, with 56.9% of them being multiple drug resistant (≥ 3). The predominant phylogroup identified was B1 followed by A and D, with similar distribution among the isolates from meat of locally reared chickens and imported chickens. Beta-lactamase producing genotype blaCTX-M-15 (50%; 10/20) was the most frequently drug resistant gene detected. More BLP E. coli isolates were found in imported chicken meat compared to locally reared chickens, demonstrating that these isolates may be spreading through food trade. In conclusion, both imported and locally produced chicken meats are potential

Beta-Lactamase Producing Escherichia coli Isolates in Imported and Locally Produced Chicken Meat from Ghana.

Directory of Open Access Journals (Sweden)

Mette Marie Rasmussen

Full Text Available The use of antibiotics in food animals is of public health concern, because resistant zoonotic pathogens can be transmitted to humans. Furthermore, global trade with food may rapidly spread multi-resistant pathogens between countries and even continents. The purpose of the study was to investigate whether imported chicken meat and meat from locally reared chicken are potential sources for human exposure to multi resistant Escherichia coli isolates. 188 samples from imported and locally produced chicken meat were sampled and analyzed. 153 bacteria isolates were successfully cultured and identified as E. coli using MALDI-ToF. Of these 109 isolates were from meat whereas the remaining 44 were isolated from the cloaca of locally reared live chickens. Antimicrobial susceptibility test was done on the identified E. coli isolates. Additionally, beta-lactamases production (ESBL and/or AmpC were phenotypically confirmed on all isolates showing resistance to cefpodoxime. Beta-lactamase producing (BLP E. coli meat isolates were further genotyped. Antimicrobial resistance to four antibiotic markers with highest resistance was detected more frequently in isolates from local chickens compared to imported chickens (tetracycline 88.9% vs. 57.5%, sulphonamide 75.0% vs. 46.6%, ampicillin 69.4% vs. 61.6% and trimethoprim 66.7% vs. 38.4%. Beta-lactamase production was found in 29 E. coli meat isolates, with 56.9% of them being multiple drug resistant (≥ 3. The predominant phylogroup identified was B1 followed by A and D, with similar distribution among the isolates from meat of locally reared chickens and imported chickens. Beta-lactamase producing genotype blaCTX-M-15 (50%; 10/20 was the most frequently drug resistant gene detected. More BLP E. coli isolates were found in imported chicken meat compared to locally reared chickens, demonstrating that these isolates may be spreading through food trade. In conclusion, both imported and locally produced chicken meats

Mn nanoparticles produced by inert gas condensation

International Nuclear Information System (INIS)

Ward, M B; Brydson, R; Cochrane, R F

2006-01-01

The results from experiments using the inert gas condensation method to produce nanoparticles of manganese are presented. Structural and compositional data have been collected through electron diffraction, EDX (energy dispersive X-ray) and EELS (electron energy loss spectroscopy). Both Mn 3 O 4 and pure Mn particles have been produced. Moisture in untreated helium gas causes the particles to oxidize, whereas running the helium through a liquid nitrogen trap removes the moisture and produces β-Mn particles in a metastable state. The particle sizes and the size distribution have been determined. Particle sizes range from 2nm to above 100 nm, however the majority of particles lie in the range below 20 nm with a modal particle size of 6 nm. As well as the modal particle size of 6 nm, there is another peak in the frequency curve at 16 nm that represents another group particles that lie in the range 12 to 20 nm. The smaller particles are single crystals, but the larger particles appear to have a dense region around their edge with a less dense centre. Determination of their exact nature is ongoing

Electron acceleration using laser produced plasmas

CERN Multimedia

CERN. Geneva; Landua, Rolf

2005-01-01

Low density plasmas have long been of interest as a potential medium for particle acceleration since relativistic plasma waves are capable of supporting electric fields greater than 100 GeV/m. The physics of particle acceleration using plasmas will be reviewed, and new results will be discussed which have demonstrated that relatively narrow energy spread (<3%) beams having energies greater than 100 MeV can be produced from femtosecond laser plasma interactions. Future experiments and potential applications will also be discussed.

Advanced Heterogeneous Fenton Treatment of Coalbed Methane-Produced Water Containing Fracturing Fluid

Directory of Open Access Journals (Sweden)

Meng Zhang

2018-04-01

Full Text Available This study investigated the heterogeneous Fenton treatment to process coalbed methane-produced water containing fracturing fluid and chose the development region of coalbed methane in the Southern Qinshui Basin as a research area. We synthesized the catalyst of Fe-Co/γ-Al2O3 by homogeneous precipitation method and characterized it by BET, XRD, SEM-EDS, FTIR, and XPS. Based on the degradation rate, we studied the influences of the heterogeneous Fenton method on the coalbed methane output water treatment process parameters, including initial pH, H2O2 concentration, and the catalyst concentration. We also investigated the impacts of overall reaction kinetics of heterogeneous catalytic oxidation on coalbed methane-produced water containing fracturing fluid. Results showed that Fe-Co/γ-Al2O3 as a Fenton catalyst has a good catalytic oxidation effect and can effectively process coalbed methane-produced water. This reaction also followed first-order kinetics. The optimal conditions were as follows: the initial pH of 3.5, a H2O2 concentration of 40 mol L−1, a catalyst concentration of 4 g/L, and an apparent reaction rate constant of 0.0172 min−1. Our results provided a basis to establish methods for treating coalbed methane-produced water.

Is it possible to treat produced water for recycle and beneficial reuse?

Energy Technology Data Exchange (ETDEWEB)

Hum, F.; Tsang, P.; Kantzas, A.; Harding, T. [Calgary Univ., AB (Canada). Tomographic Imaging and Porous Media Laboratory

2005-11-01

In 2003, the oil and gas industry in Alberta injected 0.3 billion cubic metres of produced water into disposal wells. This paper addressed the issue of using the large volume of produced water for recycling and make water reuse a sustainable activity in Alberta to reduce fresh water demand. Although produced water represents a potential resource for recycling and beneficial reuse, it must first be treated to meet water quality criteria and regulatory guidelines for specific applications. A comprehensive technical and economic review of water treatment technologies was presented. Commonly used and new water desalination technologies were reviewed and key challenges associated with the recycling of produced water were identified. It was shown that water treatment processes are commercially available and that they are not prohibitively expensive. However, the cost of implementing treating processes to meet drinking water quality guidelines is about 3 times the current cost of municipal water supply in Alberta. For that reason, it is more feasible to recycle waste water for agricultural or petroleum applications, such as waterflooding. The water quality guidelines for these other purposes are less stringent than for drinking water and there is also growing public resistance for industry to use fresh water for commercial use. 42 refs., 3 tabs., 14 figs.

Overexpression of CYB5R3 and NQO1, two NAD+ -producing enzymes, mimics aspects of caloric restriction.

Science.gov (United States)

Diaz-Ruiz, Alberto; Lanasa, Michael; Garcia, Joseph; Mora, Hector; Fan, Frances; Martin-Montalvo, Alejandro; Di Francesco, Andrea; Calvo-Rubio, Miguel; Salvador-Pascual, Andrea; Aon, Miguel A; Fishbein, Kenneth W; Pearson, Kevin J; Villalba, Jose Manuel; Navas, Placido; Bernier, Michel; de Cabo, Rafael

2018-04-28

Calorie restriction (CR) is one of the most robust means to improve health and survival in model organisms. CR imposes a metabolic program that leads to increased stress resistance and delayed onset of chronic diseases, including cancer. In rodents, CR induces the upregulation of two NADH-dehydrogenases, namely NAD(P)H:quinone oxidoreductase 1 (Nqo1) and cytochrome b 5 reductase 3 (Cyb5r3), which provide electrons for energy metabolism. It has been proposed that this upregulation may be responsible for some of the beneficial effects of CR, and defects in their activity are linked to aging and several age-associated diseases. However, it is unclear whether changes in metabolic homeostasis solely through upregulation of these NADH-dehydrogenases have a positive impact on health and survival. We generated a mouse that overexpresses both metabolic enzymes leading to phenotypes that resemble aspects of CR including a modest increase in lifespan, greater physical performance, a decrease in chronic inflammation, and, importantly, protection against carcinogenesis, one of the main hallmarks of CR. Furthermore, these animals showed an enhancement of metabolic flexibility and a significant upregulation of the NAD + /sirtuin pathway. The results highlight the importance of these NAD + producers for the promotion of health and extended lifespan. © 2018 The Authors. Aging Cell published by the Anatomical Society and John Wiley & Sons Ltd.

On the Development and Application of High Data Rate Architecture (HiDRA) in Future Space Networks

Science.gov (United States)

Hylton, Alan; Raible, Daniel; Clark, Gilbert

2017-01-01

Historically, space missions have been severely constrained by their ability to downlink the data they have collected. These constraints are a result of relatively low link rates on the spacecraft as well as limitations on the time during which data can be sent. As part of a coherent strategy to address existing limitations and get more data to the ground more quickly, the Space Communications and Navigation (SCaN) program has been developing an architecture for a future solar system Internet. The High Data Rate Architecture (HiDRA) project is designed to fit into such a future SCaN network. HiDRA's goal is to describe a general packet-based networking capability which can be used to provide assets with efficient networking capabilities while simultaneously reducing the capital costs and operational costs of developing and flying future space systems.Along these lines, this paper begins by reviewing various characteristics of modern satellite design as well as relevant characteristics of emerging technologies (such as free-space optical links capable of working at 100+ Gbps). Next, the paper describes HiDRA's design, and how the system is able to both integrate and support the operation of not only today's high-rate systems, but also the high-rate systems likely to be found in the future. This section also explores both existing and future networking technologies, such as Delay Tolerant Networking (DTN) protocol (RFC4838 citeRFC:1, RFC5050citeRFC:2), and explains how HiDRA supports them. Additionally, this section explores how HiDRA is used for scheduling data movement through both proactive and reactive link management. After this, the paper moves on to explore a reference implementation of HiDRA. This implementation is currently being realized based on a Field Programmable Gate Array (FPGA) memory and interface controller that is itself controlled by a local computer running DTN software. Next, this paper explores HiDRA's natural evolution, which includes an

Recycling produced water for algal cultivation for biofuels

Energy Technology Data Exchange (ETDEWEB)

Neal, Justin N. [Los Alamos National Laboratory; Sullivan, Enid J. [Los Alamos National Laboratory; Dean, Cynthia A. [Los Alamos National Laboratory; Steichen, Seth A. [Los Alamos National Laboratory

2012-08-09

Algal growth demands a continuous source of water of appropriate salinity and nutritional content. Fresh water sources are scarce in the deserts of the Southwestern United States, hence, salt water algae species are being investigated as a renewable biofuel source. The use of produced water from oil wells (PW) could offset the demand for fresh water in cultivation. Produced water can contain various concentrations of dissolved solids, metals and organic contaminants and often requires treatment beyond oil/water separation to make it suitable for algae cultivation. The produced water used in this study was taken from an oil well in Jal, New Mexico. An F/2-Si (minus silica) growth media commonly used to cultivate Nannochloropsis salina 1776 (NS 1776) was prepared using the produced water (F/2-Si PW) taking into account the metals and salts already present in the water. NS 1776 was seeded into a bioreactor containing 5L of the (F/2-Si PW) media. After eleven days the optical density at 750 nm (an indicator of algal growth) increased from 0 to 2.52. These results indicate algae are able to grow, though inhibited when compared with non-PW media, in the complex chemical conditions found in produced water. Savings from using nutrients present in the PW, such as P, K, and HCO{sub 3}{sup -}, results in a 44.38% cost savings over fresh water to mix the F/2-Si media.

Cryogenic 3D printing for producing hierarchical porous and rhBMP-2-loaded Ca-P/PLLA nanocomposite scaffolds for bone tissue engineering.

Science.gov (United States)

Wang, Chong; Zhao, Qilong; Wang, Min

2017-06-07

The performance of bone tissue engineering scaffolds can be assessed through cell responses to scaffolds, including cell attachment, infiltration, morphogenesis, proliferation, differentiation, etc, which are determined or heavily influenced by the composition, structure, mechanical properties, and biological properties (e.g. osteoconductivity and osteoinductivity) of scaffolds. Although some promising 3D printing techniques such as fused deposition modeling and selective laser sintering could be employed to produce biodegradable bone tissue engineering scaffolds with customized shapes and tailored interconnected pores, effective methods for fabricating scaffolds with well-designed hierarchical porous structure (both interconnected macropores and surface micropores) and tunable osteoconductivity/osteoinductivity still need to be developed. In this investigation, a novel cryogenic 3D printing technique was investigated and developed for producing hierarchical porous and recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded calcium phosphate (Ca-P) nanoparticle/poly(L-lactic acid) nanocomposite scaffolds, in which the Ca-P nanoparticle-incorporated scaffold layer and rhBMP-2-encapsulated scaffold layer were deposited alternatingly using different types of emulsions as printing inks. The mechanical properties of the as-printed scaffolds were comparable to those of human cancellous bone. Sustained releases of Ca 2+ ions and rhBMP-2 were achieved and the biological activity of rhBMP-2 was well-preserved. Scaffolds with a desirable hierarchical porous structure and dual delivery of Ca 2+ ions and rhBMP-2 exhibited superior performance in directing the behaviors of human bone marrow-derived mesenchymal stem cells and caused improved cell viability, attachment, proliferation, and osteogenic differentiation, which has suggested their great potential for bone tissue engineering.

Electrical properties of Sb and Cr-doped PbZrO3-PbTiO3-PbMg1/3Nb2/3O3 ceramics

OpenAIRE

Whatmore, Roger W.; Molter, O.; Shaw, Christopher P.

2003-01-01

The pyroelectric, dielectric and DC resistive properties of Sb and Cr-doped ceramics with a base composition of Pb(Mg1/3Nb2/3)0.025(Zr0.825Ti0.175)0.975O3 have been studied. Sb doping has been shown to produce a linear reduction in Curie temperature (TC=−22z+294 °C) with concentration (z) and to give an increase in pyroelectric coefficient from 250 to 310 μCm−2 K−1 for z increasing from 0 to 3 at.%. It also produces first a reduction and then an increase in both dielectric constant and loss, ...

Method and apparatus for producing small hollow spheres

International Nuclear Information System (INIS)

Hendricks, C.D.

1979-01-01

A method and apparatus are described for producing small hollow spheres of glass, metal or plastic, wherein the sphere material is mixed with or contains as part of the composition a blowing agent which decomposes at high temperature (T greater than or equal to 600 0 C). As the temperature is quickly raised, the blowing agent decomposes and the resulting gas expands from within, thus forming a hollow sphere of controllable thickness. The thus produced hollow spheres (20 to 10 3 μm) have a variety of application, and are particularly useful in the fabrication of targets for laser implosion such as neutron sources, laser fusion physics studies, and laser initiated fusion power plants

7 CFR 1000.44 - Classification of producer milk.

Science.gov (United States)

2010-01-01

... the market administrator shall determine for each handler described in § 1000.9(a) for each pool plant... the classification of producer milk by allocating the handler's receipts of skim milk and butterfat to the handler's gross utilization of such receipts pursuant to § 1000.43(b)(3) as follows: (a) Skim milk...

Microstructure and Textural Properties of Yoghurts Produced by Exopolysaccharides- Producing Starter Cultures

DEFF Research Database (Denmark)

Zhang, Lanjun

conferred a ropy texture and resulted in yoghurts with decreased water holding capacity and an open microstructure. In addition, one of the LB strains with high amounts of EPS producing capacity improved water retention, when it was combined with an ST strain that produced negligible amounts of EPS...