NAK WP-Cave project

International Nuclear Information System (INIS)

Svemar, C.

1985-11-01

WP-Cave is designed as an egg-shaped underground structure for intermediate storing and final disposal of high-level nuclear waste. Its height, when storing 1600 tonnes of spent fuel, is about 250 m and its diameter 110 m at mid-height. The waste storage has a compact layout and is surrounded by two engineered barriers. The innermost one is a 5 m-wide shield consisting of a mixture of bentonite clay and same which has a low hydraulic conductivity. This shield is surrounded by a so-called hydraulic cage, which initially drains the storage rock mass and, in the long-term diverts, the ground water flow past the storage. In this way an initial dry supervision period can be maintained. After sealing-off the storage and after water-filling, a stagnant chemical environment is established inside the bentonite-sand barrier preventing the disposed waste from being dissolved and from migrating to the geosphere. The programme, as outlined by the Project Board, has considered R and D questions with specific relation to the WP-Cave such as: properties of low-graded bentonite mixtures, function of the hydraulic cage, full-face boring of the storage, geomechanics of the storage and the bentonite-sand barrier, dry ventilation of the storage, temperature distributions and thermal stresses. An initial safety analysis has also been conducted. The hydraulic conductivity of low-grade bentonite mixtures has been measured in laboratory tests and found to be higher than expected. Tests of gas conductivity, for instance, confirm that only low gas pressures would build up inside the bentonite-sand barrier. The initial safety analysis indicates that a compact storage, such as that presented, would allow for the safe isolation of the spent nuclear fuel and would fulfull the radiation protection criterion of 0.1 mSv/year. With 27 refs. (Author)

User requirements Massive Point Clouds for eSciences (WP1)

NARCIS (Netherlands)

Suijker, P.M.; Alkemade, I.; Kodde, M.P.; Nonhebel, A.E.

2014-01-01

This report is a milestone in work package 1 (WP1) of the project Massive point clouds for eSciences. In WP1 the basic functionalities needed for a new Point Cloud Spatial Database Management System are identified. This is achieved by (1) literature research, (2) discussions with the project

Implementation of Work Package 7 (WP7) - a condition for achieving the CORONA project goals

International Nuclear Information System (INIS)

Tsakov, T.; Ilieva, M.; Miteva, R.

2013-01-01

Project CORONA 'Construction of a regional center for WWER competencies and nuclear technology' is a three year project co-funded by the European Commission coordinated by Kozloduy NPP and another 10 participants from eight countries. Work Package 7 (WP7) - 'Assessment and recommendations for sustainable development of regional Center for WWER nuclear technology and competence', aims to summarize and analyzing the results of the implementation of activities within the defined work packages: WP1 - Identification of training needs for all target groups; WP2 - Creating a scheme for training of nuclear scientists and researchers with the technology of WWER; WP3 - Create a schedule for training of non-nuclear specialists and subcontractors with the basics of technology WWER; WP4 - Establishing a scheme for specialized training of students with technology WWER; WP5 - Creation of a scheme for implementing and enhancing safety culture; WP6 - Creating a portal for knowledge management technology with WWER; Analysis of the results of the activity should provide conditions for creation of conditions for continued development of a regional center for obtaining and maintaining the knowledge of professionals applying WWER technology by integrating the experience of different organizations, research centers and the WWER units, in the process of creating frames for maintenance and development of this technology. By establishing the regional center will be unified schemes for qualification of personnel applying WWER technology in accordance with the standards of the International Atomic Energy Agency and the generally accepted criteria for education and vocational training in the European Community. Integrating the experience of different organizations NPP and research centers will enable to define schemes and programs for continuous education and training to be recognized in the EU from around the nuclear sector and the European Credit System for Vocational

Reports from dissemination and feed-back workshops with presentation of Volante results from WP1 and WP2, and response from local, regional, and national stakeholders

DEFF Research Database (Denmark)

Frederiksen, Pia; Vesterager, Jens Peter; Kristensen, Søren Bech Pilgaard

2014-01-01

The report constitutes an overview of the dissemination and feed-back workshops in the Volante case study countries: Netherlands, Romania, Austria, Greece and Denmark. The workshops were conducted based on the presentation of findings from WP1 and WP2 to national, regional and local stakeholders...

Synthesis of Zr2WP2O12/ZrO2 Composites with Adjustable Thermal Expansion

Directory of Open Access Journals (Sweden)

Zhiping Zhang

2017-11-01

Full Text Available Zr2WP2O12/ZrO2 composites were fabricated by solid state reaction with the goal of tailoring the thermal expansion coefficient. XRD, SEM and TMA were used to investigate the composition, microstructure, and thermal expansion behavior of Zr2WP2O12/ZrO2 composites with different mass ratio. Relative densities of all the resulting Zr2WP2O12/ZrO2 samples were also tested by Archimedes' methods. The obtained Zr2WP2O12/ZrO2 composites were comprised of orthorhombic Zr2WP2O12 and monoclinic ZrO2. As the increase of the Zr2WP2O12, the relative densities of Zr2WP2O12/ZrO2 ceramic composites increased gradually. The coefficient of thermal expansion of the Zr2WP2O12/ZrO2 composites can be tailored from 4.1 × 10−6 K−1 to −3.3 × 10−6 K−1 by changing the content of Zr2WP2O12. The 2:1 Zr2WP2O12/ZrO2 specimen shows close to zero thermal expansion from 25 to 700°C with an average linear thermal expansion coefficient of −0.09 × 10−6 K−1. These adjustable and near zero expansion ceramic composites will have great potential application in many fields.

Synthesis of Zr2WP2O12/ZrO2 Composites with Adjustable Thermal Expansion.

Science.gov (United States)

Zhang, Zhiping; Sun, Weikang; Liu, Hongfei; Xie, Guanhua; Chen, Xiaobing; Zeng, Xianghua

2017-01-01

Zr 2 WP 2 O 12 /ZrO 2 composites were fabricated by solid state reaction with the goal of tailoring the thermal expansion coefficient. XRD, SEM and TMA were used to investigate the composition, microstructure, and thermal expansion behavior of Zr 2 WP 2 O 12 /ZrO 2 composites with different mass ratio. Relative densities of all the resulting Zr 2 WP 2 O 12 /ZrO 2 samples were also tested by Archimedes' methods. The obtained Zr 2 WP 2 O 12 /ZrO 2 composites were comprised of orthorhombic Zr 2 WP 2 O 12 and monoclinic ZrO 2 . As the increase of the Zr 2 WP 2 O 12 , the relative densities of Zr 2 WP 2 O 12 /ZrO 2 ceramic composites increased gradually. The coefficient of thermal expansion of the Zr 2 WP 2 O 12 /ZrO 2 composites can be tailored from 4.1 × 10 -6 K -1 to -3.3 × 10 -6 K -1 by changing the content of Zr 2 WP 2 O 12 . The 2:1 Zr 2 WP 2 O 12 /ZrO 2 specimen shows close to zero thermal expansion from 25 to 700°C with an average linear thermal expansion coefficient of -0.09 × 10 -6 K -1 . These adjustable and near zero expansion ceramic composites will have great potential application in many fields.

Wpływ cukrzycy na rozwój i funkcjonowanie dziecka

OpenAIRE

Buchnat, Marzena

2006-01-01

Choroba przewlekła, jaką jest cukrzyca, wpływa niekorzystnie na rozwój dziecka, powodując zmianę sposobu życia zarówno dla dziecka jak i jego rodziny. Jest źródłem wielu trudnych sytuacji, ponieważ wpływa na sposób funkcjonowania dziecka na różnych płaszczyznach. Jednak jak dalece choroba będzie zakłócać ten sposób funkcjonowania, zależy nie tylko od samej choroby, ale i od sposobu jej przyjęcia przez dziecko Cukrzyca szczególnie negatywne wpływa na kształtowanie się osobowości. Trzeba ...

Stable Weyl points, trivial surface states, and particle-hole compensation in WP2

Science.gov (United States)

Razzoli, E.; Zwartsenberg, B.; Michiardi, M.; Boschini, F.; Day, R. P.; Elfimov, I. S.; Denlinger, J. D.; Süss, V.; Felser, C.; Damascelli, A.

2018-05-01

A possible connection between extremely large magnetoresistance and the presence of Weyl points has garnered much attention in the study of topological semimetals. Exploration of these concepts in transition-metal diphosphides WP2 has been complicated by conflicting experimental reports. Here we combine angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations to disentangle surface and bulk contributions to the ARPES intensity, the superposition of which has plagued the determination of the band structure in WP2. Our results show that while the hole- and electronlike Fermi surface sheets originating from surface states have different areas, the bulk-band structure of WP2 is electron-hole compensated in agreement with DFT. Furthermore, the ARPES band structure is compatible with the presence of at least four temperature-independent Weyl points, confirming the topological nature of WP2 and its stability against lattice distortions.

Extremely high magnetoresistance and conductivity in the type-II Weyl semimetals WP2 and MoP2.

Science.gov (United States)

Kumar, Nitesh; Sun, Yan; Xu, Nan; Manna, Kaustuv; Yao, Mengyu; Süss, Vicky; Leermakers, Inge; Young, Olga; Förster, Tobias; Schmidt, Marcus; Borrmann, Horst; Yan, Binghai; Zeitler, Uli; Shi, Ming; Felser, Claudia; Shekhar, Chandra

2017-11-21

The peculiar band structure of semimetals exhibiting Dirac and Weyl crossings can lead to spectacular electronic properties such as large mobilities accompanied by extremely high magnetoresistance. In particular, two closely neighboring Weyl points of the same chirality are protected from annihilation by structural distortions or defects, thereby significantly reducing the scattering probability between them. Here we present the electronic properties of the transition metal diphosphides, WP 2 and MoP 2 , which are type-II Weyl semimetals with robust Weyl points by transport, angle resolved photoemission spectroscopy and first principles calculations. Our single crystals of WP 2 display an extremely low residual low-temperature resistivity of 3 nΩ cm accompanied by an enormous and highly anisotropic magnetoresistance above 200 million % at 63 T and 2.5 K. We observe a large suppression of charge carrier backscattering in WP 2 from transport measurements. These properties are likely a consequence of the novel Weyl fermions expressed in this compound.

Electrical power system WP-04

Science.gov (United States)

Nored, Donald L.

1990-01-01

Viewgraphs on Space Station Freedom Electrical Power System (EPS) WP-40 are presented. Topics covered include: key EPS technical requirements; photovoltaic power module systems; solar array assembly; blanket containment box and box positioning subassemblies; solar cell; bypass diode assembly; Kapton with atomic oxygen resistant coating; sequential shunt unit; gimbal assembly; energy storage subsystem; thermal control subsystem; direct current switching unit; integrated equipment assembly; PV cargo element; PMAD system; and PMC and AC architecture.

East Asian winter temperature variation associated with the combined effects of AO and WP pattern

Science.gov (United States)

Park, Hye-Jin; Ahn, Joong-Bae

2016-04-01

The combined effects of the Arctic Oscillation (AO) and Western Pacific (WP) teleconnection pattern on the East Asian winter monsoon (EAWM) over the last 56 years (1958/59-2013/2014) were investigated using NCEP/NCAR reanalysis data (Park and Ahn, 2015). The study results revealed that the effect of the AO on winter temperature in East Asia could be changed depending on the phases of the WP pattern in the North Pacific. The negative relationship between the EAWM and the AO increased when the AO and WP were in-phase with each other. Hence, when winter negative (positive) AO was accompanied by negative (positive) WP, negative (positive) temperature anomalies were dominant across the entire East Asia region. Conversely, when the AO and WP were of-of-phase, the winter temperature anomaly in East Asia did not show distinct changes. Furthermore, from the perspective of stationary planetary waves, the zonal wavenumber-2 patterns of sea level pressure and geopotential height at 500hPa circulation strengthened when the AO and WP were in-phase but were not significant for the out-of-phase condition. It explained the possible mechanism of the combined effects of the AO and WP on the circulation related to EAWM. Reference Park, H.-J., and J.-B. Ahn (2015) Combined effect of the Arctic Oscillation and the Western Pacific pattern on East Asia winter temperature, Clim. Dyn. DOI:10.1007/s00382-015-2763-2. Acknowledgements This work was funded by the Korea Meteorological Administration Research and Development Program under grant KMIPA2015-2081.

EPOS-WP16 : A coherent and collaborative network of Solid Earth Multi-scale laboratories

NARCIS (Netherlands)

Calignano, E.; Rosenau, Matthias; Lange, Otto; Spiers, C.J.; Willingshofer, E.; Drury, M.R.; van Kan, M.; Elger, Kirsten; Ulbricht, Damian; Funiciello, F.; Trippanera, Daniele; Sagnotti, Leonardo; Scarlato, Piergiorgio; Tesei, Telemaco; winkler, Aldo

2017-01-01

infrastructures range from the nano- and micrometre levels (electron microscopy and micro-beam analysis) to the scale of experiments on centimetres-sized samples, and to analogue model experiments simulating the reservoir scale, the basin scale and the plate scale. The aim of WP16 is to provide two

Radiation fields, dosimetry, biokinetics and biophysical models for cancer induction by ionising radiation 1996-1999. Biophysical models for the induction of cancer by radiation. Final report

International Nuclear Information System (INIS)

Paretzke, H.G.; Ballarini, F.; Brugmans, M.

2000-01-01

The overall project is organised into seven work packages. WP1 concentrates on the development of mechanistic, quantitative models for radiation oncogenesis using selected data sets from radiation epidemiology and from experimental animal studies. WP2 concentrates on the development of mechanistic, mathematical models for the induction of chromosome aberrations. WP3 develops mechanistic models for radiation mutagenesis, particularly using the HPRT-mutation as a paradigm. WP4 will develop mechanistic models for damage and repair of DNA, and compare these with experimentally derived data. WP5 concentrates on the improvement of our knowledge on the chemical reaction pathways of initial radiation chemical species in particular those that migrate to react with the DNA and on their simulation in track structure codes. WP6 models by track structure simulation codes the production of initial physical and chemical species, within DNA, water and other components of mammalian cells, in the tracks of charged particles following the physical processes of energy transfer, migration, absorption, and decay of excited states. WP7 concentrates on the determination of the start spectra of those tracks considered in WP6 for different impinging radiation fields and different irradiated biological objects. (orig.)

EPOS-IP WP10: services and data provision for the GNSS community

Science.gov (United States)

Fernandes, Rui

2016-04-01

The EPOS-IP WP10 - "GNSS Data & Products" is the Working Package of the EPOS-IP project in charge of implementing the necessary services in order that the geo-sciences community can access the existing Pan-European Geodetic Infrastructures. The WP10 is formed by representatives of the participating institutions (10) but it is also open to the entire geodetic community. In fact, WP10 also includes members from other institutions/countries that formally are not participating in the EPOS-IP. During the EPOS-IP project, the geodetic component of EPOS (WP10) is dealing essentially with Research Infrastructures focused on continuous operating GNSS (cGNSS). The option of concentrating the efforts on the presently most generalized geodetic tool supporting research on Solid Earth was decided in order to optimize the existing resources. Furthermore, although the focus is on Solid Earth applications, other research and technical applications (e.g., reference frames, meteorology, space weather) can also benefit from the efforts of WP10 towards the optimization of the geodetic resources in Europe. We will present and discuss the plans for the implementation of the thematic and core services (TCS) for GNSS data within EPOS and the related business plan. We will focus on strategies towards the implementation of the best solutions that will permit to the end-users, and in particular geo-scientists, to access the geodetic data, derived solutions, and associated metadata using transparent and uniform processes. The collaboration with EUREF is also an essential component of the implementation plan.

Flow and wakes in large wind farms: Final report for UpWind WP8

DEFF Research Database (Denmark)

Barthelmie, Rebecca Jane; Frandsen, Sten Tronæs; Rathmann, Ole

This report summarises the research undertaken through the European Commission funded project UpWind Wp8:Flow. The objective of the work was to develop understanding of flow in large wind farms and to evaluate models of power losses due to wind turbine wakes focusing on complex terrain and offshore...

Pro-apoptotic activity of new analog of anthracyclines--WP 631 in advanced ovarian cancer cell line.

Science.gov (United States)

Gajek, Arkadiusz; Denel, Marta; Bukowska, Barbara; Rogalska, Aneta; Marczak, Agnieszka

2014-03-01

In this work we investigated the mode of cell death induced by WP 631, a novel anthracycline antibiotic, in the ovarian cancer cell line (OV-90) derived from the malignant ascites of a patient diagnosed with advanced disease. The effects were compared with those of doxorubicin (DOX), a first generation anthracycline. The ability of WP 631 to induce apoptosis and necrosis was examined by double staining with Annexin V and propidium iodide, measurements of the level of intracellular calcium ions and cytochrome c, PARP cleavage. We also investigated the possible involvement of the caspases activation, DNA degradation (comet assay) and intracellular reactive oxygen species (ROS) production in the development of the apoptotic events and their significance for drug efficiency. The results obtained clearly demonstrate that antiproliferative capacity of WP 631 in tested cell line was a few times greater than that of DOX. Furthermore, ovarian cancer cells treated with WP 631 showed a higher mean level of basal DNA damage in comparison to DOX. In conclusion, WP 631 is able to induce caspase - dependent apoptosis in human ovarian cancer cells. Obtained results suggested that WP 631 may be a candidate for further evaluation as chemotherapeutic agents for human cancers. Copyright © 2013 Elsevier Ltd. All rights reserved.

Legal market abuse regulations of WpHG (law on stock trading) and the REMIT-VO in the electricity spot trading; Marktmissbrauchsrechtliche Regelungen des WpHG und der REMIT-VO im Stromspothandel

Energy Technology Data Exchange (ETDEWEB)

Retsch, Alexander T.

2014-07-01

The thesis on legal market abuse regulations of WpHG (law on stock trading) and the REMIT-VO in the electricity spot trading include the discussion of the following issues: market abuse, its forms of appearance (market manipulation, insider trade, insider information), electricity spot trading, relevant legislative frame, market abuse regulations (WpHG), interdiction of market manipulation and related regulations.

WP2 Annual Report 1st year

DEFF Research Database (Denmark)

Jensen, Jørgen Juncher

2006-01-01

This report constitutes a contribution to the consolidated annual report covering the activities in SAFEDOR for the first year (1/2-2005 to 1/2-2006). The report deals in five separate chapters one for each of the five subprojects. The objectives of WP2 are • To develop and / or refine such advan...

Low temperature resistivity plateau and non-saturating magnetoresistance in Type-II Weyl semimetal WP2

Science.gov (United States)

Nagpal, V.; Kumar, P.; Sudesh, Patnaik, S.

2018-04-01

We have studied the resistivity and magnetoresistance (MR) properties of the recently predicted type-II Weyl semimetal WP2. Polycrystalline WP2 is synthesized using solid state reaction and crystallizes in an orthorhombic structure with the Cmc21 spacegroup. The temperature dependent resistivity is enhanced with the application of magnetic field and a resistivity plateau is observed at low temperatures. We find a small dip in resistivity around 30K at 5T field suggesting that there might be a metal-insulator-like transition at higher magnetic fields. A non-saturating magnetoresistance is observed at low temperatures with maximum MR ˜ 94% at 2K and 6T. The value of MR decreases with the increase in temperature. We see a deviation from Kohler's power law which implies that the system comprises of two types of charge carriers.

Flow and wakes in large wind farms. Final report for UpWind WP8

Energy Technology Data Exchange (ETDEWEB)

Barthelmie, R.J.; Frandsen, S.T.; Rathmann, O. (Risoe DTU (Denmark)); Hansen, K. (Technical Univ. of Denmark (DTU), Kgs. Lyngby (Denmark)); Politis, E.; Prospathopoulos, J. (CRES (Greece)); Schepers, J.G. (ECN, Petten (Netherlands)); Rados, K. (NTUA, Athens (Greece)); Cabezon, D. (CENER, Sarriguren (Spain)); Schlez, W.; Neubert, A.; Heath, M. (Garrad Hassan and Partners (Germany) (United Kingdom))

2011-02-15

This report summarises the research undertaken through the European Commission funded project UpWind Wp8:Flow. The objective of the work was to develop understanding of flow in large wind farms and to evaluate models of power losses due to wind turbine wakes focusing on complex terrain and offshore. A crosscutting activity was to improve and compare the performance of computational fluid dynamics models with wind farm models. The report contains 6 deliverable reports and guideline to wind farm wake analysis as appendices. (Author)

CAMEX-4 NOAA WP-3D VIDEO V1

Data.gov (United States)

National Aeronautics and Space Administration — The CAMEX-4 NOAA WP-3D Video dataset was collected during the fourth field campaign in the CAMEX series (CAMEX-4), which ran from 16 August to 25 September, 2001 and...

STAT3 inhibitor WP1066 as a novel therapeutic agent for bCCI neuropathic pain rats.

Science.gov (United States)

Xue, Zhao-Jing; Shen, Le; Wang, Zhi-Yao; Hui, Shang-Yi; Huang, Yu-Guang; Ma, Chao

2014-10-02

Activation of signal transducer and activator of transcription-3 (STAT3) is suggested to be critically involved in the development of chronic pain, but the complex regulation of STAT3-dependent pathway and the functional significance of inhibiting this pathway during the development of neuropathic pain remain elusive. To evaluate the contribution of the JAK2/STAT3 pathway to neuropathic pain and the potentiality of this pathway as a novel therapeutic target, we examined the effects of the STAT3 inhibitor WP1066 by intrathecal administration in a rat model of bilateral chronic constriction injury (bCCI). The pain behavior tests were performed before the surgery and on postoperative day 3, 7, 14 and 21. L4-L6 dorsal spinal cord were harvested at each time point. Both RT-PCR and Western blot were performed to evaluate the activation of JAK2/STAT3 pathway. To observe the influence of WP1066 on neuropathic pain and its molecular mechanism, WP1066 (10 μl, 10 mmol/L in DMSO) or the same capacity of DMSO as the control were applied through the intrathecal tube on the day before bCCI surgery, and on the postoperative day 3 and 5. Behavioral tests were performed to observe the therapeutic effect on mechanical, thermal and cold hyperalgesia. L4-L6 dorsal spinal cord was harvested on postoperative day fourteen, followed by RT-PCR and Western blot evaluation of the JAK2/STAT3 pathway activation. The mechanical, thermal and cold hyperalgesia of the bCCI rats were significantly decreased when compared with the Sham or the Naïve group at each postoperative time point (PbCCI rats, accompanied by SOCS3 mRNA with a similar tendency. Western blot analysis showed that JAK2 and phosphorylated STAT3 increased significantly since 3 days after bCCI. JAK2 peaked on postoperative day 14 while phosphorylated STAT3 peaked on postoperative day 7 and gradually decreased thereafter and SOCS3׳s peak level on postoperative day 3. When WP1066 were administered intrathecally, the pain behaviors of

Viewls - Biomass production potentials in Central and Eastern Europe under different scenarios. Final report of WP3 of the VIEWLS project, funded by DG-Tren

Energy Technology Data Exchange (ETDEWEB)

Dam, J. van; Faaij, A.; Lewandowski, I. (and others)

2006-01-15

The EU has set ambitious targets to increase the use of Renewable Energy Sources from which a large part has to come from biomass To meet these targets, a large amount of biomass resources is needed which requires large areas of land in the EU. This article discusses a methodology and results for a regional biomass potential assessment in Central and Eastern European Accession countries (CEEC). The biomass potential assessment is implemented for a defined set of scenarios. The scenarios are based on the main drivers in Europe relevant for agriculture and land use change, i.e. World Trade Negotiations or Common Agricultural Policy. The methodology for the biomass potential assessment is based on land use changes over time. A certain amount of land is needed to meet the required production for food (derived from agricultural crops and livestock) and wood products. The surplus available land can possibly be used for biomass production. Results of the biomass potential assessment are available on a Nuts-3 region level in the CEEC for different scenarios. As the concept of large-scale biomass production is only feasible when production is profitable for the stakeholders involved, price and cost-relations are included in the assessment. Final deliverable are cost-supply curves from different sources (energy crops, residues) and scenarios for the CEEC. (au)

SKB WP-cave project. Radionuclide release from the near-field in a WP-cave repository

International Nuclear Information System (INIS)

Lindgren, M.; Skagius, K.

1989-04-01

The release of radionuclides from the bentonite-sand barrier (near-field) in a WP-cave repository for high level radioactive waste has been studied. Calculations were made for two cases; a Low Flow Through Case and a High Flow Through Case. The difference between the two cases lies in the assumed hydraulic properties of the bentonite-sand barrier and the system inside the barrier. The effect on the nuclide release of solubility limitations, sorption capacity of the barriers, radiolytic fuel oxidation rate as well as the thickness of the bentonite-sand barrier, were also investigated for the Low Flow Through Case. (authors)

Mobbing w miejscu pracy a regulacyjna rola strategii wpływu społecznego

Directory of Open Access Journals (Sweden)

Malgorzata Gamian-Wilk

2017-12-01

Full Text Available Artykuł stanowi przegląd teoretyczny, dotyczący problematyki mobbinguw miejscu pracy z perspektywy przejawów wpływu społecznego. Porównanonegatywne działania, charakterystyczne dla mobbingu, do procesu manipulacji orazdo taktyk wpływu społecznego, pojawiających się w miejscu pracy. Przedstawionoźródła i czynniki ryzyka rozwoju mobbingu, które mogą ułatwiać lub dawać przyzwoleniena  stosowanie taktyk manipulacji. Wykazano, że  w  procesie mobbingu występują takie strategie wpływu społecznego, jak manipulacja w języku i procesiekomunikacji, ostracyzm czy też plotka. Dyskusji poddano regulacyjną rolę negatywnychsposobów oddziaływania i strategii wpływu dla funkcjonowania i przetrwaniagrupy i organizacji, co przyczyniać się może do utrwalania się rozwoju mobbingu.

'Freestyle' - 5.5 kWp photovoltaic roof; Toiture photovoltaique Freestyle de 5,5 kWp

Energy Technology Data Exchange (ETDEWEB)

Affolter, P. [Solstis, Lausanne (Switzerland)

2005-07-01

This illustrated final report for the Swiss Federal Office of Energy (SFOE) describes a photovoltaics installation on a villa in the vineyards above the Lake of Geneva in Switzerland. The 'Freestyle' roofing system used, which allows a roof to be covered with an unglazed, watertight photovoltaic system, is described. This system features aluminium profiles that are fixed to the roof structure, corrugated panels that form a self-draining sub-roof and laminated photovoltaic (PV) cells based on triple-cell amorphous silicon technology. This pilot system with a peak power of 5.5 kW covers an area of 160 m{sup 2}. The active PV area amounts to 100 m{sup 2}. The aesthetics of the installation is discussed. The operation and performance of the system, which was put into service in May 2003, is discussed. The results of measurements made over a period of more than 12 months are presented. The author states that these results are far better than expected.

Biological effects of dyes on bacteria. VI. Mutation induction by acridine orange and methylene blue in the dark with special reference to Escherichia coli WP6 (polA1)

Energy Technology Data Exchange (ETDEWEB)

Webb, R.B.; Hass, B.S.

1984-01-01

Acridine orange (AO) and methylene blue (MB) in the dark were shown to be weak to moderate mutagens (induction of resistance to T5 phage) in repair-deficient strains of Escherichia coli B/r. However, strain WP2, (wild-type) was not mutated by AO in the dark, in confirmation of earlier data. The presence of 2 ..mu..M AO reduced by 41% the spontaneous mutation rate in strain WP2, from 4.1 to 2.4 mutants/10/sup 8/ cells/generation. In the polymerase I-deficient strain WP6 (polA1), 2 ..mu..M AO increased the mutation rate in the dark 14-fold. It is proposed that both spontaneous and AO-induced mutagenesis in the absence of light occur at the site of semiconservative DNA replication. If the intercalation mechanism for the effects in the absence of light is valid, the wild-type strain (WP2) may be resistant to frameshift mutagenesis induced by intercalated compounds, while the polymerase I-deficient strain (WP6) may be highly susceptible to the presence of an intercalated dye such as AO at the DNA-replication fork. MB and AO likely act through different mechanisms since MB is only a moderate mutagen in strain WP6 and the other repair-deficient strains tested.

NAK WP-cave project: Thermally induced convective motion in groundwater in the near field of the WP-cave after filling and closure

International Nuclear Information System (INIS)

Hopkirk, R.J.

1989-04-01

The thermal convective motion induced in groundwater due to the decay heat generated by the high-level waste in the WP-Cave has been studied by means of coupled thermo-hydraulic numerical models. The WPC concept is proposed as an alternative to the KBS-3 repository concept for construction in crystalline rock. However, in the absence of specific site fissure data, the rock mass has been modelled as a quasi-porous medium. The repository was assumed to be filled 40 years after unloading of the spent fuel. For a further 100 years the whole repository is cooled, before being backfilled and sealed off. Maximum waste temperatures and the fluid fluxes crossing the backfilled bentonite diffusion barrier were monitored to 3000 years after fuel unloading. At the same time, the effects of the hydraulic cage and of a highly permeable rock zone beneath the central storage volume on the induced fluid flows have been assessed. (orig.)

Free-standing ternary NiWP film for efficient water oxidation reaction

Science.gov (United States)

Yang, Yunpeng; Zhou, Kuo; Ma, Lili; Liang, Yanqin; Yang, Xianjin; Cui, Zhenduo; Zhu, Shengli; Li, Zhaoyang

2018-03-01

High-efficient catalysts for oxygen evolution reaction (OER) is of great concern in improving energy efficiency for water splitting. Here we report a high-performance OER electrocatalyst of nickel-tungsten-phosphorus (NiWP) film prepared by template method. This free-standing ternary electrocatalyst exhibits a remarkable electrocatalytic activity of OER in alkaline medium due to the synergetic effect among these elements and the good electrical conductivity. The reported NiWP composite catalyst has an overpotential of as low as 0.4 V (vs. RHE) at 30 mA cm-2, better than that of the commercial RuO2 catalyst. Moreover, a small charge transfer resistance of 4.06 Ω and a Tafel slope of 68 mV dec-1 demonstrate the outstanding catalytic activity.

A water-soluble pillar[5]arene as a new carrier for an old drug.

Science.gov (United States)

Barbera, Lucia; Franco, Domenico; De Plano, Laura M; Gattuso, Giuseppe; Guglielmino, Salvatore P P; Lentini, Germana; Manganaro, Nadia; Marino, Nino; Pappalardo, Sebastiano; Parisi, Melchiorre F; Puntoriero, Fausto; Pisagatti, Ilenia; Notti, Anna

2017-04-11

The remarkable affinity of deca-carboxylatopillar[5]arene WP5 towards the aminoglycoside antibiotic, amikacin, in aqueous media is reported; in vitro studies on Gram-positive bacteria (Staphylococcus aureus) show that drug entrapment inside WP5 also takes place in the presence of the microrganisms, thus pointing to WP5 as an appealing carrier for amikacin targeted delivery.

CRITICALITY CALCULATION FOR THE MOST REACTIVE DEGRADED CONFIGURATIONS OF THE FFTF SNF CODISPOSAL WP CONTAINING AN INTACT IDENT-69 CONTAINER

International Nuclear Information System (INIS)

D.R. Moscalu

2002-01-01

The objective of this calculation is to perform additional degraded mode criticality evaluations of the Department of Energy's (DOE) Fast Flux Test Facility (FFTF) Spent Nuclear Fuel (SNF) codisposed in a 5-Defense High-Level Waste (5-DHLW) Waste Package (WP). The scope of this calculation is limited to the most reactive degraded configurations of the codisposal WP with an almost intact Ident-69 container (breached and flooded but otherwise non-degraded) containing intact FFTF SNF pins. The configurations have been identified in a previous analysis (CRWMS M andO 1999a) and the present evaluations include additional relevant information that was left out of the original calculations. The additional information describes the exact distribution of fissile material in each container (DOE 2002a). The effects of the changes that have been included in the baseline design of the codisposal WP (CRWMS M andO 2000) are also investigated. The calculation determines the effective neutron multiplication factor (k eff ) for selected degraded mode internal configurations of the codisposal waste package. These calculations will support the demonstration of the technical viability of the design solution adopted for disposing of MOX (FFTF) spent nuclear fuel in the potential repository. This calculation is subject to the Quality Assurance Requirements and Description (QARD) (DOE 2002b) per the activity evaluation under work package number P6212310M2 in the technical work plan TWP-MGR-MD-0000101 (BSC 2002)

ETV REPORT: REMOVAL OF CHEMICAL CONTAMINANTS IN DRINKING WATER – WATTS PREMIER INC. WP-4V DRINKING WATER TREATMENT SYSTEM

Science.gov (United States)

The Watts Premier WP-4V POU drinking water treatment system was tested for removal of aldicarb, benzene, cadmium, carbofuran, cesium, chloroform, dichlorvos, dicrotophos, fenamiphos, mercury, mevinphos, oxamyl, strontium, and strychnine. The WP-4V employs a reverse osmosis (RO) m...

CATS Deliverable 5.1 : CATS verification of test matrix and protocol

NARCIS (Netherlands)

Uittenbogaard, J.; Camp, O.M.G.C. op den; Montfort, S. van

2016-01-01

This report summarizes the work conducted within work package (WP) 5 "Verification of test matrix and protocol" of the Cyclist AEB testing system (CATS) project. It describes the verification process of the draft CATS test matrix resulting from WP1 and WP2, and the feasibility of meeting

ENETRAP III WP7. European guidance on the implementation of the requirements of the EURATOM BSS; ENETRAP III WP7. Europaeische Leitlinien zur Umsetzung der Aus- und Weiterbildungs-Anforderungen der EURATOM-Grundnormen im Strahlenschutz

Energy Technology Data Exchange (ETDEWEB)

Paynter, R. [EUTERP (Netherlands); Stewart, J. [PHE (United Kingdom); Schmitt-Hannig, A. [BfS (Germany); Coeck, M. [SCK-CEN (Belgium); Falcao, A. [IST (Portugal)

2016-07-01

The Euratom BSS lays down specific requirements for the Radiation Protection Expert (RPE) and for the Radiation Protection Officer (RPO) and education and training requirements associated with these roles. A guidance document has been developed within the framework of ENETRAP III WP7 ''Guidance to support the implementation of E and T requirements for RPE and RPO as defined in the Euratom BSS''. The objective of WP7 activities is to facilitate the implementation of the new requirements for RPE and RPO in Member States and to help ensuring a consistent approach throughout the European Union.

Geochemistry Model Validation Report: Material Degradation and Release Model

Energy Technology Data Exchange (ETDEWEB)

H. Stockman

2001-09-28

The purpose of this Analysis and Modeling Report (AMR) is to validate the Material Degradation and Release (MDR) model that predicts degradation and release of radionuclides from a degrading waste package (WP) in the potential monitored geologic repository at Yucca Mountain. This AMR is prepared according to ''Technical Work Plan for: Waste Package Design Description for LA'' (Ref. 17). The intended use of the MDR model is to estimate the long-term geochemical behavior of waste packages (WPs) containing U. S . Department of Energy (DOE) Spent Nuclear Fuel (SNF) codisposed with High Level Waste (HLW) glass, commercial SNF, and Immobilized Plutonium Ceramic (Pu-ceramic) codisposed with HLW glass. The model is intended to predict (1) the extent to which criticality control material, such as gadolinium (Gd), will remain in the WP after corrosion of the initial WP, (2) the extent to which fissile Pu and uranium (U) will be carried out of the degraded WP by infiltrating water, and (3) the chemical composition and amounts of minerals and other solids left in the WP. The results of the model are intended for use in criticality calculations. The scope of the model validation report is to (1) describe the MDR model, and (2) compare the modeling results with experimental studies. A test case based on a degrading Pu-ceramic WP is provided to help explain the model. This model does not directly feed the assessment of system performance. The output from this model is used by several other models, such as the configuration generator, criticality, and criticality consequence models, prior to the evaluation of system performance. This document has been prepared according to AP-3.10Q, ''Analyses and Models'' (Ref. 2), and prepared in accordance with the technical work plan (Ref. 17).

Geochemistry Model Validation Report: Material Degradation and Release Model

International Nuclear Information System (INIS)

Stockman, H.

2001-01-01

The purpose of this Analysis and Modeling Report (AMR) is to validate the Material Degradation and Release (MDR) model that predicts degradation and release of radionuclides from a degrading waste package (WP) in the potential monitored geologic repository at Yucca Mountain. This AMR is prepared according to ''Technical Work Plan for: Waste Package Design Description for LA'' (Ref. 17). The intended use of the MDR model is to estimate the long-term geochemical behavior of waste packages (WPs) containing U. S . Department of Energy (DOE) Spent Nuclear Fuel (SNF) codisposed with High Level Waste (HLW) glass, commercial SNF, and Immobilized Plutonium Ceramic (Pu-ceramic) codisposed with HLW glass. The model is intended to predict (1) the extent to which criticality control material, such as gadolinium (Gd), will remain in the WP after corrosion of the initial WP, (2) the extent to which fissile Pu and uranium (U) will be carried out of the degraded WP by infiltrating water, and (3) the chemical composition and amounts of minerals and other solids left in the WP. The results of the model are intended for use in criticality calculations. The scope of the model validation report is to (1) describe the MDR model, and (2) compare the modeling results with experimental studies. A test case based on a degrading Pu-ceramic WP is provided to help explain the model. This model does not directly feed the assessment of system performance. The output from this model is used by several other models, such as the configuration generator, criticality, and criticality consequence models, prior to the evaluation of system performance. This document has been prepared according to AP-3.10Q, ''Analyses and Models'' (Ref. 2), and prepared in accordance with the technical work plan (Ref. 17)

Environmental benefits of parking-integrated photovoltaics: A 222kWp experience

DEFF Research Database (Denmark)

Serrano-Luján, Lucía; García-Valverde, Rafael; Espinosa, Nieves

2015-01-01

integration (in this case parking integration) have been quantified using a standard methodology for the calculation of several environmental parameters. Finally, the environmental benefits of renewable energy generation because of the savings of producing the same amount of electricity by the Spanish grid...... in the system, the energy payback time, and the energy return factor of the facility have been obtained and are 6.31TJ equivalent primary energy, 2.06 and 12.16years, respectively. The average performance ratio is 0.8 with a slight monthly variation. Additionally, the environmental benefits of the architectural......The life cycle assessment of a grid-connected, parking integrated, 222kWp cadmium telluride photovoltaic system has been performed. The system was built at the University of Murcia and has been monitored for 2.5years (sampling data every 5min). The detailed material inventory, the energy embedded...

An Epstein-Barr virus anti-apoptotic protein constitutively expressed in transformed cells and implicated in burkitt lymphomagenesis: the Wp/BHRF1 link.

Directory of Open Access Journals (Sweden)

Gemma L Kelly

2009-03-01

Full Text Available Two factors contribute to Burkitt lymphoma (BL pathogenesis, a chromosomal translocation leading to c-myc oncogene deregulation and infection with Epstein-Barr virus (EBV. Although the virus has B cell growth-transforming ability, this may not relate to its role in BL since many of the transforming proteins are not expressed in the tumor. Mounting evidence supports an alternative role, whereby EBV counteracts the high apoptotic sensitivity inherent to the c-myc-driven growth program. In that regard, a subset of BLs carry virus mutants in a novel form of latent infection that provides unusually strong resistance to apoptosis. Uniquely, these virus mutants use Wp (a viral promoter normally activated early in B cell transformation and express a broader-than-usual range of latent antigens. Here, using an inducible system to express the candidate antigens, we show that this marked apoptosis resistance is mediated not by one of the extended range of EBNAs seen in Wp-restricted latency but by Wp-driven expression of the viral bcl2 homologue, BHRF1, a protein usually associated with the virus lytic cycle. Interestingly, this Wp/BHRF1 connection is not confined to Wp-restricted BLs but appears integral to normal B cell transformation by EBV. We find that the BHRF1 gene expression recently reported in newly infected B cells is temporally linked to Wp activation and the presence of W/BHRF1-spliced transcripts. Furthermore, just as Wp activity is never completely eclipsed in in vitro-transformed lines, low-level BHRF1 transcripts remain detectable in these cells long-term. Most importantly, recognition by BHRF1-specific T cells confirms that such lines continue to express the protein independently of any lytic cycle entry. This work therefore provides the first evidence that BHRF1, the EBV bcl2 homologue, is constitutively expressed as a latent protein in growth-transformed cells in vitro and, in the context of Wp-restricted BL, may contribute to virus

Genetic toxicology of metal compounds. II. Enhancement of ultraviolet light-induced mutagenesis in Escherichia coli WP2

International Nuclear Information System (INIS)

Rossman, T.G.; Molina, M.

1986-01-01

Salts of metals which are carcinogenic, noncarcinogenic, or of unknown carcinogenicity were assayed for their abilities to modulate ultraviolet (UV)-induced mutagenesis in Escherichia coli WP2. In addition to the previously reported comutagenic effect of arsenite, salts of three other compounds were found to enhance UV mutagenesis. CuCl 2 , MnCl 2 (and a small effect by KMnO 4 ), and NaMoO 4 acted as comutagens in E coli WP2, which has wild-type DNA repair capability, but were much less comutagenic in the repair deficient strain WP2/sub s/ (uvrA). The survival of irradiated or unirradiated cells was not affected by these compounds. No effects on UV mutagenesis were seen for 16 other metal compounds. We suggest that the comutagenic effects might occur either via metal-induced decreases in the fidelity of repair replication or via metal-induced depurination

Legal market abuse regulations of WpHG (law on stock trading) and the REMIT-VO in the electricity spot trading

International Nuclear Information System (INIS)

Retsch, Alexander T.

2014-01-01

The thesis on legal market abuse regulations of WpHG (law on stock trading) and the REMIT-VO in the electricity spot trading include the discussion of the following issues: market abuse, its forms of appearance (market manipulation, insider trade, insider information), electricity spot trading, relevant legislative frame, market abuse regulations (WpHG), interdiction of market manipulation and related regulations.

CATS Deliverable 5.1 : CATS verification of test matrix and protocol

OpenAIRE

Uittenbogaard, J.; Camp, O.M.G.C. op den; Montfort, S. van

2016-01-01

This report summarizes the work conducted within work package (WP) 5 "Verification of test matrix and protocol" of the Cyclist AEB testing system (CATS) project. It describes the verification process of the draft CATS test matrix resulting from WP1 and WP2, and the feasibility of meeting requirements set by CATS consortium based on requirements in Euro NCAP AEB protocols regarding accuracy, repeatability and reproducibility using the developed test hardware. For the cases where verification t...

Wpływ czynników społeczno-ekonomicznych na zachowania zdrowotne nastolatków mieszkających w Rybniku

Directory of Open Access Journals (Sweden)

Marcin Dudek

2016-12-01

Full Text Available Wstęp. Wpływ czynników społeczno-ekonomicznych na zdrowie od lat jest tematem badań naukowców. Wykazano znaczny wpływ tych czynników na zdrowie populacji. Bezrobocie, niski dochód, migracje oraz status rodziny (pełna, niepełna, rozbita wpływają na zdrowie rodziny i dzieci. Celem pracy było określenie wpływu czynników społeczno-ekonomicznych na zachowania zdrowotne młodzieży zamieszkującej miasto Rybnik. Materiał i metody. Badanie ankietowe przeprowadzono pośród 391 uczniów rybnickich szkół. Poziom majętności rodziny określono za pomocą skali FAS. Za istotny statystycznie przyjęto poziom p<0,05. Wyniki. Badanie wykazało znaczący wpływ statusu rodziny na zachowania zdrowotne, uczniowie z rodzin rozbitych znacznie częściej sięgali po używki, oraz częściej zaniedbywali swoje zdrowie. Podobne wyniki wykazano wśród dzieci migrantów. Status materialny nie determinuje w tak dużym stopniu zachowań zdrowotnych nastolatków. Wnioski. Czynnik społeczno-ekonomiczne silnie determinują zdrowie młodzieży. Szczególnie narażeni na negatywne zachowania zdrowotne są nastolatkowie wychowujący się w rodzinach niepełnych oraz w rodzinach, w których co najmniej jeden z rodziców wyemigrował."

Direct enzyme assay evidence confirms aldehyde reductase function of Ydr541cp and Ygl039wp from Saccharomyces cerevisiae.

Science.gov (United States)

Moon, Jaewoong; Liu, Z Lewis

2015-04-01

The aldehyde reductase gene ARI1 is a recently characterized member of an intermediate subfamily within the short-chain dehydrogenase/reductase (SDR) superfamily that clarified mechanisms of in situ detoxification of 2-furaldehyde and 5-hydroxymethyl-2-furaldehyde by Saccharomyces cerevisiae. Uncharacterized open reading frames (ORFs) are common among tolerant candidate genes identified for lignocellulose-to-advanced biofuels conversion. This study presents partially purified proteins of two ORFs, YDR541C and YGL039W, and direct enzyme assay evidence against aldehyde-inhibitory compounds commonly encountered during lignocellulosic biomass fermentation processes. Each of the partially purified proteins encoded by these ORFs showed a molecular mass of approximately 38 kDa, similar to Ari1p, a protein encoded by aldehyde reductase gene. Both proteins demonstrated strong aldehyde reduction activities toward 14 aldehyde substrates, with high levels of reduction activity for Ydr541cp toward both aromatic and aliphatic aldehydes. While Ydr541cp was observed to have a significantly higher specific enzyme activity at 20 U/mg using co-factor NADPH, Ygl039wp displayed a NADH preference at 25 U/mg in reduction of butylaldehyde. Amino acid sequence analysis identified a characteristic catalytic triad, Ser, Tyr and Lys; a conserved catalytic motif of Tyr-X-X-X-Lys; and a cofactor-binding sequence motif, Gly-X-X-Gly-X-X-Ala, near the N-terminus that are shared by Ydr541cp, Ygl039wp, Yol151wp/GRE2 and Ari1p. Findings of aldehyde reductase genes contribute to the yeast gene annotation and aids development of the next-generation biocatalyst for advanced biofuels production. Copyright © 2015 John Wiley & Sons, Ltd.

Efficacité des fongicides Mancozèbe 80 WP et Chlorothalonil ...

African Journals Online (AJOL)

Cinq plants ont été inoculés par isolat. Chaque plant inoculé est couvert de toile cirée noire et déposé sous abris. Efficacité des fongicides Mancozèbe 80 WP ... sans fongicide. Nc : nombre de spores comptées sur milieu avec fongicide. Germination des spores. Les spores d'une culture de 7 jours de l'isolat Cgldc3 de C.

M-Eco enhanced Adaptation Service (D5.3)

DEFF Research Database (Denmark)

Lage, Ricardo Gomes; Leginus, Martin; Dolog, Peter

2012-01-01

with two new tags selection algorithms. We also introduce a propagation of the (ir)relevant terms obtained from tag clouds usage to WP3 and WP4 in order to improve their data collections algorithms. The evaluation part of the report summarizes the benefits and drawbacks of the models presented...... extensions. The multi-factor recommendation model is incremented with more factors, including time decay, tagging activity and location. Location is also improved with a method to predict event trajectories. Moreover, a new family of tensor-based recommenders is presented. The tag cloud model is improved...

Wpływ nakładów na badania i rozwój na rentowność przedsiębiorstw

Directory of Open Access Journals (Sweden)

Barbara Grabińska

2018-03-01

Full Text Available Celem artykułu jest zbadanie wpływu wydatków na badania i rozwój na wzrost rentowności przedsię- biorstw. Sformułowana na podstawie badań literaturowych hipoteza badawcza zakłada statystycznie istotny i dodatni wpływ intensywności wydatków B+R na wzrost rentowności w roku następnym. Została ona zweryfikowana za pomocą dwóch modeli, które, oprócz czynników wpływających na rentowność i zmiennych kontrolnych, obejmują dwie różne miary intensywności wydatków badawczo-rozwojowych, których wpływ na rentowność został stwierdzony w pracach innych autorów. Badanie zostało przeprowa- dzone za pomocą analizy regresji panelowej w wariancie odpornym (tzw. robust za pomocą modelu I (II na próbie 2123 (1940 rocznych sprawozdań finansowych 458 (384 amerykańskich spółek giełdowych z okresu obejmującego lata 2007–2016. Spółki amerykańskie zostały wybrane do próby badawczej ze względu na fakt, że US GAAP zasadniczo nie dopuszczają możliwości ujęcia (kapitalizacji w bilansie wydatków na badania i rozwój. W rezultacie wszystkie tego typu wydatki są widoczne bezpośrednio w sprawozdaniu finansowym. Badania zostały przeprowadzone z uwzględnieniem jednorocznego opóź- nienia czasowego wpływu wydatków B+R na wzrost rentowności. Wyniki analizy wskazują, że inten- sywność wydatków na badania i rozwój w sposób statystycznie istotny wpływają na wzrost rentowności badanych jednostek, co tym samym dostarcza argumentów na rzecz pozytywnej weryfikacji przyjętej w pracy hipotezy. Powyższe wyniki mogą mieć znacznie dla organów stanowiących regulacje rachunko- wości, jak również kadry zarządczej spółek przy podejmowaniu inwestycji w B+R, jak również użyt- kowników sprawozdań finansowych. The main aim of the paper is to investigate the impact of R&D expenditures on the growth of company profitability. On the basis of literature review a main hypothesis was formulated as follows: the

Early Activation of Apoptosis and Caspase-independent Cell Death Plays an Important Role in Mediating the Cytotoxic and Genotoxic Effects of WP 631 in Ovarian Cancer Cells.

Science.gov (United States)

Gajek, Arkadiusz; Denel-Bobrowska, Marta; Rogalska, Aneta; Bukowska, Barbara; Maszewski, Janusz; Marczak, Agnieszka

2015-01-01

The purpose of this study was to provide a detailed explanation of the mechanism of bisanthracycline,?WP 631 in comparison to doxorubicin (DOX), a first generation anthracycline, currently the most widely used pharmaceutical in clinical oncology. Experiments were performed in SKOV-3 ovarian cancer cells which are otherwise resistant to standard drugs such as cis-platinum and adriamycin. As attention was focused on the ability of WP 631 to induce apoptosis, this was examined using a double staining method with Annexin V and propidium iodide probes, with measurement of the level of intracellular calcium ions and cytosolic cytochrome c. The western blotting technique was performed to confirm PARP cleavage. We also investigated the involvement of caspase activation and DNA degradation (comet assay and immunocytochemical detection of phosphorylated H2AX histones) in the development of apoptotic events. WP 631 demonstrated significantly higher effectiveness as a pro-apoptotic drug than DOX. This was evident in the higher levels of markers of apoptosis, such as the externalization of phosphatidylserine and the elevated level of cytochrome c. An extension of incubation time led to an increase in intracellular calcium levels after treatment with DOX. Lower changes in the calcium content were associated with the influence of WP 631. DOX led to the activation of all tested caspases, 8, 9 and 3, whereas WP 631 only induced an increase in caspase 8 activity after 24h of treatment and consequently led to the cleavage of PARP. The lack of active caspase 3 had no outcome on the single and double-stranded DNA breaks. The obtained results show that WP 631 was considerably more genotoxic towards the investigated cell line than DOX. This effect was especially visible after longer times of incubation. The above detailed studies indicate that WP 631 generates early apoptosis and cell death independent of caspase-3, detected at relatively late time points. The observed differences in the

EPOS-WP16: A coherent and collaborative network of Solid Earth Multi-scale laboratories

Science.gov (United States)

Calignano, Elisa; Rosenau, Matthias; Lange, Otto; Spiers, Chris; Willingshofer, Ernst; Drury, Martyn; van Kan-Parker, Mirjam; Elger, Kirsten; Ulbricht, Damian; Funiciello, Francesca; Trippanera, Daniele; Sagnotti, Leonardo; Scarlato, Piergiorgio; Tesei, Telemaco; Winkler, Aldo

2017-04-01

Laboratory facilities are an integral part of Earth Science research. The diversity of methods employed in such infrastructures reflects the multi-scale nature of the Earth system and is essential for the understanding of its evolution, for the assessment of geo-hazards and for the sustainable exploitation of geo-resources. In the frame of EPOS (European Plate Observing System), the Working Package 16 represents a developing community of European Geoscience Multi-scale laboratories. The participant and collaborating institutions (Utrecht University, GFZ, RomaTre University, INGV, NERC, CSIC-ICTJA, CNRS, LMU, C4G-UBI, ETH, CNR*) embody several types of laboratory infrastructures, engaged in different fields of interest of Earth Science: from high temperature and pressure experimental facilities, to electron microscopy, micro-beam analysis, analogue tectonic and geodynamic modelling and paleomagnetic laboratories. The length scales encompassed by these infrastructures range from the nano- and micrometre levels (electron microscopy and micro-beam analysis) to the scale of experiments on centimetres-sized samples, and to analogue model experiments simulating the reservoir scale, the basin scale and the plate scale. The aim of WP16 is to provide two services by the year 2019: first, providing virtual access to data from laboratories (data service) and, second, providing physical access to laboratories (transnational access, TNA). Regarding the development of a data service, the current status is such that most data produced by the various laboratory centres and networks are available only in limited "final form" in publications, many data remain inaccessible and/or poorly preserved. Within EPOS the TCS Multi-scale laboratories is collecting and harmonizing available and emerging laboratory data on the properties and process controlling rock system behaviour at all relevant scales, in order to generate products accessible and interoperable through services for supporting

Economic Comparison of Two Business Models for Implementation of Small Integrated PV Systems

International Nuclear Information System (INIS)

Matak, N.; Krajacic, G.; Jerkic, E.; Duic, N.

2016-01-01

We compared two different models for the implementation of small photovoltaic solar systems in the Croatia. The new prosumer model presented in the new Croatian law on the Renewable Energy Sources and Highly Efficient Cogeneration (OG 100/15) and PV ESCO model which is similar to net metering. The PV ESCO model is developed from authors to determine possibility to raise payback period of small integrated PV systems. The comparison was done on a 15-minute basis and there were compared values of Simple Payback Period (SPP) for different locations and systems size considering electricity demand and market prices. Internal Rate of Return (IRR) and Net Present Value (NPV) were compared for 4 different cases. Conducted comparison showed that PV ESCO model is always more favourable for the owner of PV system in terms of lower SPP and higher IRR and NPV. It has been noticed that for systems higher than 5 kWp use of PV ESCO model is recommended. For smaller systems it is not always clear which model should be used, since some losses are generated in the system on the side of the electricity supply company. For smaller systems from 2 to 5 kWp, PV ESCO model has SPP from 7.5 to 13 years and SPP value for the prosumer model is 8.7 to 15 years. This difference is higher when comparing PV system from 6 to 10 kWp. SPP for PV ESCO model, in that case, is from 10 to 13 years and in the prosumer model is from 17.5 to 28 years.(author).

M-Eco enhanced Adaptation Service (D5.2)

DEFF Research Database (Denmark)

Dolog, Peter; Durao, Frederico; Lage, Ricardo Gomes

2012-01-01

In this report, we present the improvements of the Adaptive Tuning and Personalization (WP5) component of the M-Eco system. This component is focused on four main areas of interest to users of surveillance systems: presentation options for recommendation and adaptation, user and group models, use...... interests. The main contributions of the report are spatial reasoning methods evaluated in group recommendations, personalized tag clouds, and web services integration....

Performance and safety analysis of WP-cave concept

International Nuclear Information System (INIS)

Skagius, K.; Svemar, C.

1989-08-01

The report presents a performance safety, and cost analysis of the WP-cave, WPC, concept. In the performance analysis, questions specific to the WPC have been addressed which have been identified to require more detailed studies. Based on the outcome of this analysis, a safety analysis has been made which comprises of the modeling and calculation of radionuclide transport from the repository to the biosphere and the resulting dose exposure to man. The result of the safety analysis indicates that the present design of a WPC repository may give unacceptably high doses. By improving the properties of the bentonite/sand barrier such that the hydraulic conductivity is reduced, or by changing the short-lived steel canisters to more long-lived canisters, e.g. copper canisters, it is judged possible to achieve a sufficiently low level of dose exposure rates to man. The cost for a WPC repository of the studied design is significantly higher than for a KBS-3 repository considering the Swedish conditions and the Swedish amount of spent fuel. The major costs are connected to the excavation and backfilling of the bentonite/sand barrier. The potential for cost savings is high but it is not judged possible to account for savings in such a way that the WPC concept shows lower cost than the KBS-3 concept. (34 figs., 33 tabs., 29 refs.)

Migracja i edukacja: czy transnarodowe rodzicielstwo wpływa na osiągnięcia szkolne niemobilnych dzieci?

Directory of Open Access Journals (Sweden)

Bartłomiej Walczak

2017-12-01

Full Text Available W artykule została podjęta kwestia wpływu transnarodowej mobilności rodziców na osiągnięcia edukacyjne ich rezydentnych dzieci. Wyniki badań opisywanych w międzynarodowej literaturze nie są jednoznaczne, co wynika ze zróżnicowania wskaźników sukcesu edukacyjnego, specyfiki systemów edukacyjnych i struktury zmiennych niezależnych oraz pośredniczących uwzględnianych w analizach. Polskie badania opierają się niemal wyłącznie na nielosowych próbach nauczycieli i dyrektorów oraz nielicznych, regionalnych badaniach prowadzonych na próbach uczniów. W artykule wykorzystano dane zebrane w 2014 r. w ramach badania sondażowego przeprowadzonego na ogólnopolskiej losowej próbie 4169 uczniów w wieku 10–19 lat. Uzyskane wyniki wskazują na niekorzystny wpływ migracji pojedynczych rodziców (szczególnie matek w przypadku uczniów szkół podstawowych na wyniki oceniania wewnątrzszkolnego. W tej kategorii wieku wpływ jest porównywalny z dziedziczonym statusem wykształceniowym, lecz praktycznie zanika w starszych kohortach.

The role of reactive oxygen species in WP 631-induced death of human ovarian cancer cells: a comparison with the effect of doxorubicin.

Science.gov (United States)

Rogalska, Aneta; Gajek, Arkadiusz; Szwed, Marzena; Jóźwiak, Zofia; Marczak, Agnieszka

2011-12-01

In the present study, we investigated the anticancer activity of WP 631, a new anthracycline analog, in weakly doxorubicin-resistant SKOV-3 ovarian cancer cells. We studied the time-course of apoptotic and necrotic events: the production of reactive oxygen species (ROS) and changes in the mitochondrial membrane potential in human ovarian cancer cells exposed to WP 631 in the presence and absence of an antioxidant, N-acetylcysteine (NAC). The effect of WP 631 was compared with the activity of doxorubicin (DOX), the best known first-generation anthracycline. Cytotoxic activity was determined by the MTT assay. The morphological changes characteristic of apoptosis and necrosis in drug-treated cells were analyzed by double staining with Hoechst 33258 and propidium iodide (PI) using fluorescence microscopy. The production of reactive oxygen species and changes in mitochondrial membrane potential were studied using specific fluorescence probes: DCFH2-DA and JC-1, respectively. The experiments showed that WP 631 was three times more cytotoxic than DOX in the tested cell line. It was found that the new anthracycline analog induced mainly apoptosis and, marginally, necrosis. Apoptotic cell death was associated with morphological changes and a decrease in mitochondrial membrane potential. In comparison to DOX, the novel bisanthracycline induced a significantly higher level of ROS and a greater drop in the membrane potential. The results provide direct evidence that the novel anthracycline WP 631 is considerably more cytotoxic to human SKOV-3 ovarian cancer cells than doxorubicin. The drug can produce ROS, which are immediately involved in the induction of apoptotic cell death. Copyright © 2011 Elsevier Ltd. All rights reserved.

AET III 100 kWp photovoltaic installation in Riazzino - Results of monitoring; Monitoraggio dell'impianto PV da 100 kWp AET III a Riazzino

Energy Technology Data Exchange (ETDEWEB)

Rezzonico, S.; Bura, E.

2005-07-01

This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a monitoring project that monitored the performance of the 100 kWp, grid-connected photovoltaic installation in Riazzino in southern Switzerland. The original installation, dating from 1992, was refurbished with three new inverters and new cabling. The results of a three-year monitoring project are presented and discussed. Figures are presented on the plant's power production, which illustrate the improved performance of the new inverters. Further investigations made on the power ratings of the modules and the results of infrared examination are discussed.

Results on 3D interconnection from AIDA WP3

Energy Technology Data Exchange (ETDEWEB)

Moser, Hans-Günther, E-mail: hgm@hll.mpg.de

2016-09-21

From 2010 to 2014 the EU funded AIDA project established in one of its work packages (WP3) a network of groups working collaboratively on advanced 3D integration of electronic circuits and semiconductor sensors for applications in particle physics. The main motivation came from the severe requirements on pixel detectors for tracking and vertexing at future Particle Physics experiments at LHC, super-B factories and linear colliders. To go beyond the state-of-the-art, the main issues were studying low mass, high bandwidth applications, with radiation hardness capabilities, with low power consumption, offering complex functionality, with small pixel size and without dead regions. The interfaces and interconnects of sensors to electronic readout integrated circuits are a key challenge for new detector applications.

Wpływ zmęczenia cieplnego żeliwa GJS(Ni1,5MoCu -bazowego do wytwarzania ADI - na strukturę i wytrzymałość

Directory of Open Access Journals (Sweden)

J. Wróbel

2010-04-01

Full Text Available W pracy przedstawiono wyniki badań zmęczenia cieplnego żeliwa sferoidalnego GJS Ni1,5MoCu, bazowego przy wytwarzaniu ADI.Określono wpływ maksymalnej temperatury cyklu (Tmax na odporność na zmęczenie cieplne wyznaczane metodą L.F. Coffina. W pracyopisano przemiany struktury powodowane procesem zmęczenia cieplnego. Również w tym niskostopowym żeliwie obserwuje sięzjawisko ferrytyzacji osnowy i spadku wytrzymałości Rm w procesie narastania liczby cykli cieplno-naprężeniowych. Żeliwo w końcowejfazie zmęczenia zachowuje jedynie około 60% początkowej wytrzymałości Rm, a struktura wyjściowa czysto perlityczna ulega pełnejferrytyzacji. Dodatki stopowe podnoszą znacząco wytrzymałość na zmęczenie cieplne, jednak nie stabilizują struktury przy jej cyklicznym nagrzewaniu.

Integrating GRID tools to build a computing resource broker: activities of DataGrid WP1

International Nuclear Information System (INIS)

Anglano, C.; Barale, S.; Gaido, L.; Guarise, A.; Lusso, S.; Werbrouck, A.

2001-01-01

Resources on a computational Grid are geographically distributed, heterogeneous in nature, owned by different individuals or organizations with their own scheduling policies, have different access cost models with dynamically varying loads and availability conditions. This makes traditional approaches to workload management, load balancing and scheduling inappropriate. The first work package (WP1) of the EU-funded DataGrid project is addressing the issue of optimizing the distribution of jobs onto Grid resources based on a knowledge of the status and characteristics of these resources that is necessarily out-of-date (collected in a finite amount of time at a very loosely coupled site). The authors describe the DataGrid approach in integrating existing software components (from Condor, Globus, etc.) to build a Grid Resource Broker, and the early efforts to define a workable scheduling strategy

Experimental Comparison of Efficiency of First Aid Dressings in Burning White Phosphorus on Bacon Model

Science.gov (United States)

Witkowski, Wojciech; Surowiecka-Pastewka, Agnieszka; Biesaga, Magdalena; Gierczak, Tomasz

2015-01-01

Background The aim of this study was to determine effectiveness of first aid dressings in extinguishing burning white phosphorous (WP), eliminating WP pieces from the surface, inhibiting re-ignition on the model (fresh bacon covered with military uniform), and preventing from late re-ignition caused by persistent WP pieces. Material/Methods Burning WP was extinguished with several dressings: tactical Military Dressing (WJ10), wet gauze, 2 hydrocolloids, and 3 prototypes of hydrocolloids developed by the authors. Results All examined dressings were effective in extinguishing WP provided that the entire area of the burning substance was completely covered. Moist gauze was especially effective in extinguishing WP, and also removed and absorbed the majority of the WP mass, preventing deeper penetration of WP particles. The immediate re-ignition was observed when all the remaining examined dressings were removed from the bacon. A stream of water was dangerous, as it splashed and transferred pieces of WP around. Conclusions Moist gauze placed on burning WP for approximately 3 min was most effective in extinguishing WP and removing most of the WP pieces. We recommend moist gauze, used once or twice, as the best primary means for WP elimination and preventing tissue penetration. As a dressing used for medical evacuation (MEDEVAC), or as a second step after complete removal of visible WP, innovative hydrocolloid or hydrogel dressings should be used. PMID:26264209

Influence of Anti-Foaming Admixture on Frost Resistance and Porosity Characteristic of Self-Compacting Concrete / Wpływ Domieszki Przeciwpieniacej Na Mrozoodpornosc I Charakterystyke Porowatosci Betonu Samozageszczalnego

Directory of Open Access Journals (Sweden)

Łazniewska-Piekarczyk B.

2011-12-01

Full Text Available Wcelu obnizenia zbyt duzej zawartosci powietrza w samozageszczalnej mieszance betonowej mozna stosowac domieszki przeciwpieniace (AFA. Efektem stosowania AFA jest takze wzrost srednicy i zmniejszenie czasu rozpływu mieszanki betonowej. Ponadto, utrata urabialnosci SCC w czasie jest mniejsza. Mieszanka betonowa zawierajaca w swym składzie SP i AFA jest bardziej odporna na segregacje w porównaniu do mieszanki betonowej wykonanej tylko z SP. Wpływ AFA na wytrzymałosc SCC zalezy od zastosowanej proporcji miedzy SP i AFA. AFA nie charakteryzuje sie negatywnym wpływem na mrozoodpornosc SCC. Pozytywny wpływ AFA na charakterystyke SCC wykazały rezultaty badan porowatosci SCC wg normy EN 480-11.

Testing multi-factor asset pricing models in the Visegrad countries

Czech Academy of Sciences Publication Activity Database

Morgese Borys, Magdalena

-, č. 323 (2007), s. 1-40 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : capital asset pricing model * macroeconomic factor models * cost of capital Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp323.pdf

Report 5: Guidance document Implementation of lightning hazards in extended PSA

International Nuclear Information System (INIS)

Ivanov, I.; Simurka, P.; Prochaska, J.; Brac, P.; Vasseur, D.; Duquerroy, P.; Trouilloud, C.; Kumar, M.; Potempski, S.; Vinot, T.

2016-01-01

The lightning (including the electromagnetic interference) is indicated with no. 39 in the exhaustive list of external hazards posing potential threats to nuclear installations, in particular in the list of the Meteorological events considered in ASAMPSA-E. The survey performed in the framework of ASAMPSA-E (WP10) to collect interests of the PSA the end users showed that the lightning is amongst the ten external hazards most often considered by the respondents. Thence the attention to the lightning hazard is within the scope of the extended PSA and its role in the safety of the nuclear power plant is underlined in this report. This report is a joint deliverable of ASAMPSA-E WP21 (Initiating events modelling) and WP22 (How to introduce hazards in L1 PSA and all possibilities of events combinations), which are intended: - to examine characteristics and modelling of lightning in PSA, - to identify and promote exchanges of some good practices on the implementation of lightning in L1 PSA. This report includes the End-Users recommendations given in WP10 and results from discussions at the first End- Users Workshop, Uppsala, Sweden, May 2014, questionnaire survey and discussions at the Final End-Users Workshop, Vienna, Austria- September 2016. (authors)

Collaborative Research and Development (CR&D). Task Order 0049: Tribological Modeling

Science.gov (United States)

2008-05-01

scratch test for TiN on stainless steel with better substrate mechanical properties. This present study was focused on the study of stress distribution...AFRL-RX-WP-TR-2010-4189 COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Task Order 0049: Tribological Modeling Young Sup Kang Universal...SUBTITLE COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Task Order 0049: Tribological Modeling 5a. CONTRACT NUMBER F33615-03-D-5801-0049 5b

Tent Preservation Project - Demonstration/Validation for Replacement of Aqueous Copper 8 Quinolinolate Treatment of Cotton Webbing With RO-59-WP

National Research Council Canada - National Science Library

Bosselman, Suzanne E

2008-01-01

.... This report describes a demonstration/validation study of an alternative coating, RO-59-WP, as a potential additive to or replacement for Copper 8, which has been taken off the market several times...

Study of Power Quality at the Point of Common Coupling of a Low Voltage Grid and a Distributed Generation System of 7.8 kWp in a Tropical Region

Directory of Open Access Journals (Sweden)

Agustín Valverde Granja

2018-06-01

Full Text Available In this paper we analyze an experimental 1000 kWh/month distributed generation system in a tropical region connected to a point of common coupling in a low voltage grid that was characterized according to NTC 5001. This photovoltaic system has 7.8 kWp and uses 30 polycrystalline silicon-panels of 260 Wp each. Its maximum energy produced was 850 kWh/month, equivalent to 72.65% of the installed capacity. Finally, there was an increase of 2% with respect to the minimum voltage value that was recorded. The voltage unbalance decreases between 3.5 and 70% and voltage harmonics in each line increased by 7% on line U1, 0.8% on U2, 3% on U3 and current harmonics have a 22% increase. Likewise, the total active and reactive power were increased by 58% and 42% respectively, and the thermography study allowed to establish a temperature increase at the point of common coupling of 7.5%. Therefore, it is expected that this paper can serve as a reference for the application of Colombian law 1715 in solar energy.

Importance of a diffusion-dominant small volume to activate cell-secreted soluble factor signaling in embryonic stem cell culture in microbioreactors: a mathematical model based study.

Science.gov (United States)

Chowdhury, Mohammad Mahfuz; Fujii, Teruo; Sakai, Yasuyuki

2013-07-01

In our previous studies, we observed that cell-secreted BMP4 had a prominent influence on mouse embryonic stem cell (mESC) behaviors in a membrane-based two-chambered microbioreactor (MB), but not in a macro-scale culture (6-well plate/6WP). In this study, we investigated how the physical aspects of these cultures regulated BMP4 signaling by developing mathematical models of the cultures. The models estimated signaling activity in the cultures by considering size of the undifferentiated mESC colonies and their growth, diffusion of BMP4, and BMP4 trafficking process in the colonies. The models successfully depicted measured profile of BMP4 concentration in the culture medium which was two times higher in the MB than that in the 6WP during 5-day culture. The models estimated that, owing to the small volume and the membrane, cells were exposed to a higher BMP4 concentration in the top chamber of the MB than that in the 6WP culture. The higher concentration of BMP4 induced a higher concentration of BMP4-bound receptor in the colony in the MB than in the 6WP, thereby leading to the higher activation of BMP4 signaling in the MB. The models also predicted that the size of the MB, but not that of the 6WP, was suitable for maximizing BMP4 accumulation and upregulating its signaling. This study will be helpful in analyzing culture systems, designing microfluidic devices for controlling ESC or other cell behavior. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Precipitation in Powder Metallurgy, Nickel Base Superalloys: Review of Modeling Approach and Formulation of Engineering (Postprint)

Science.gov (United States)

2016-12-01

AFRL-RX-WP-JA-2016-0333 PRECIPITATION IN POWDER- METALLURGY , NICKEL-BASE SUPERALLOYS: REVIEW OF MODELING APPROACH AND FORMULATION OF...PRECIPITATION IN POWDER- METALLURGY , NICKEL- BASE SUPERALLOYS: REVIEW OF MODELING APPROACH AND FORMULATION OF ENGINEERING (POSTPRINT) 5a...and kinetic parameters required for the modeling of γ′ precipitation in powder- metallurgy (PM), nickel-base superalloys are summarized. These

Joint CARE-ELAN, CARE-HHH-APD, and EUROTEV-WP3 Workshop on Electron Cloud Clearing

CERN Document Server

Scandale, Walter; Schulte, D; Zimmermann, F; Electron Cloud Effects and Technological Consequences; ECL2

2007-01-01

This report contains the Proceedings of the joint CARE-HHH-APD, CARE-ELAN, and EUROTEV-WP3 Mini-Workshop on 'Electron Cloud Clearing - Electron Cloud and Technical Consequences', "ECL2", held at CERN in Geneva, Switzerland, 1-2 March 2007). The ECL2 workshop explored novel technological remedies against electron-cloud formation in an accelerator beam pipe. A primary motivation for the workshop was the expected harmful electron-cloud effects in the upgraded LHC injectors and in future linear colliders, as well as recent beam observations in operating facilities like ANKA, CESR, KEKB, RHIC, and SPS. The solutions discussed at ECL2 included enamel-based clearing electrodes, slotted vacuum chambers, NEG coating, and grooves. Several of the proposed cures were assessed in terms of their clearing efficiency and the associated beam impedance. The workshop also reviewed new simulation tools like the 3D electron-ion build-up 'Faktor', modeling assumptions, analytical calculations, beam experiments, and laboratory meas...

CRISP. Information Security Models and Their Economics

International Nuclear Information System (INIS)

Gustavsson, R.; Mellstrand, P.; Tornqvist, B.

2005-03-01

The deliverable D1.6 includes background material and specifications of a CRISP Framework on protection of information assets related to power net management and management of business operations related to energy services. During the project it was discovered by the CRISP consortium that the original description of WP 1.6 was not adequate for the project as such. The main insight was that the original emphasis on cost-benefit analysis of security protection measures was to early to address in the project. This issue is of course crucial in itself but requires new models of consequence analysis that still remains to be developed, especially for the new business models we are investigated in the CRISP project. The updated and approved version of the WP1.6 description, together with the also updated WP2.4 focus on Dependable ICT support of Power Grid Operations constitutes an integrated approach towards dependable and secure future utilities and their business processes. This document (D1.6) is a background to deliverable D2.4. Together they provide a dependability and security framework to the three CRISP experiments in WP3

Wpływ leptyny i adiponektyny na procesy chondrogenezy i osteoblastogenezy – znaczenie w patogenezie reumatoidalnego zapalenia stawów

Directory of Open Access Journals (Sweden)

Urszula Skalska

2011-04-01

Full Text Available Leptyna i adiponektyna to klasyczne adipokiny produkowane przezbiałą tkankę tłuszczową. Mają one działanie plejotropowe; ich rolębada się w takich chorobach, jak reumatoidalne zapalenie stawówczy choroba zwyrodnieniowa stawów. Dotąd nie wiadomo, jakidokładnie wpływ wywierają one na procesy chondrogenezyi osteoblastogenezy. Te dwa procesy są bardzo istotne z punktuwidzenia reumatoidalnego zapalenia stawów, gdyż w chorobie tejdochodzi do destrukcji chrząstki i kości stawowej. Istotne jestokreślenie, jaką rolę odgrywają adipokiny w reumatoidalnymzapaleniu stawów oraz w jaki sposób wpływają na różnicowaniekomórek mezenchymalnych. W niniejszej pracy przedstawionoobecną wiedzę na temat roli adiponektyny i leptyny w procesachosteogenezy i chondrogenezy (tab. I i II.

Supramolecular Host-Guest System as Ratiometric Fe3+ Ion Sensor Based on Water-Soluble Pillar[5]arene.

Science.gov (United States)

Yao, Qianfang; Lü, Baozhong; Ji, Chendong; Cai, Yang; Yin, Meizhen

2017-10-18

Developing a specific, ratiometric, and reversible detection method for metal ions is significant to guard against the threat of metal-caused environmental pollution and organisms poisoning. Here a supramolecular host-guest system (WP5⊃G) based on water-soluble pillar[5]arene (WP5) and water-soluble quaternized perylene diimide derivative (G) was constructed. Morphological transformation was achieved during the process of adding WP5 into G aqueous solution, and a fluorescence "turn-off" phenomenon was observed which was caused by supramolecular photoinduced electron transfer (PET). Meanwhile, hydrophobic effect and electrostatic interaction played important roles in this supramolecular process, which was confirmed by isothermal titration calorimeter (ITC) and ζ potential experiments. Furthermore, the supramolecular host-guest system could be a "turn-on" fluorescent probe for Fe 3+ ion detection through the process of interdicting supramolecular PET. Moreover, the Fe 3+ ion detection showed specific, ratiometric, and reversible performances with a detection limit of 2.13 × 10 -7 M, which might have great potentials in biological and environmental monitoring.

Viewls - Shift gear to biofuels. Results and recommendations from the VIEWLS project

Energy Technology Data Exchange (ETDEWEB)

Heuvel, E. van den

2006-11-15

Biofuels are fuels made from an organic origin, as opposed to a fossil-fuel-based origin. This is an enormous advantage in a period where the undesired impacts of environmental changes are increasingly being experienced. The organic origin implies that the circle between environmental profit and loss is (about to be) closed. At the same time, the advantage of being an organic fuel is also a weakness: the production of the biomass resources, the production processes themselves and the use of the fuels in transport vehicles lead to varying emission figures, thus causing a lack of consensus concerning the degree to which the 'circle' is closed. The fact that biofuels are produced from an organic origin also creates opportunities, especially for farmers and biomass producers. The new members of the European Union could benefit from this opportunity, creating a win-win situation for both existing and new Member States, i.e. employment in the agricultural sector and reduced environmental pressure in the transport sector - a sector confronted with continued increases in energy consumption and corresponding CO{sub 2}-eq. emissions. Furthermore, if biofuels can be produced in the extended European Union (EU-25) countries, then both existing and new Member States can contribute to the trend reversal of oil import dependency. In order to achieve this, we need to discover how to minimise the market introduction costs of biofuels when entering the transport fuels market. (au)

Endokrynny wpływ tkanki tłuszczowej na stan skóry

OpenAIRE

Jaśkiewicz, Jerzy; Goździalska, Anna; Lizak, Dorota

2012-01-01

Praca recenzowana / peer-reviewed paper Komórki tkanki tłuszczowej, adipocyty, różnicują się w okresie życia płodowego z pierwotnych fi broblastów. W adipocytach gromadzone są substraty energetyczne w postaci zestryfi - kowanych kwasów tłuszczowych. W komórkach tych zachodzą aktywne procesy syntezy kwasów tłuszczowych, a także reakcji elongacji i desaturacji lipidów. Dla stabilności energetycznej ustroju znaczący wpływ ma korelacja osi insulina–glukagon z aktywnością takich enzymów, jak...

Interim Particulate Matter Test Method for the Determination of Particulate Matter from Gas Turbine Engines, SERDP Project WP-1538 Final Report

Science.gov (United States)

Under Project No. WP-1538 of the Strategic Environmental Research and Development Program, the U. S. Air Force's Arnold Engineering Development Center (AEDC) is developing an interim test method for non-volatile particulate matter (PM) specifically for the Joint Strike Fighter (J...

Development of Demonstrably Predictive Models for Emissions from Alternative Fuels Based Aircraft Engines

Science.gov (United States)

2017-05-01

Engineering Chemistry Fundamentals, Vol. 5, No. 3, 1966, pp. 356–363. [14] Burns, R. A., Development of scalar and velocity imaging diagnostics...in an Aero- Engine Model Combustor at Elevated Pressure Using URANS and Finite- Rate Chemistry ,” 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference...FINAL REPORT Development of Demonstrably Predictive Models for Emissions from Alternative Fuels Based Aircraft Engines SERDP Project WP-2151

Checking the Adequacy of Fit of Models from Split-Plot Designs

DEFF Research Database (Denmark)

Almini, A. A.; Kulahci, Murat; Montgomery, D. C.

2009-01-01

models. In this article, we propose the computation of two R-2, R-2-adjusted, prediction error sums of squares (PRESS), and R-2-prediction statistics to measure the adequacy of fit for the WP and the SP submodels in a split-plot design. This is complemented with the graphical analysis of the two types......One of the main features that distinguish split-plot experiments from other experiments is that they involve two types of experimental errors: the whole-plot (WP) error and the subplot (SP) error. Taking this into consideration is very important when computing measures of adequacy of fit for split-plot...... of errors to check for any violation of the underlying assumptions and the adequacy of fit of split-plot models. Using examples, we show how computing two measures of model adequacy of fit for each split-plot design model is appropriate and useful as they reveal whether the correct WP and SP effects have...

Performance of a 34 kWp grid-connected PV system in Indonesia - A comparison of tropical and European PV systems

NARCIS (Netherlands)

Veldhuis, A.J.; Reinders, Angelina H.M.E.

2014-01-01

We analysed a monitored grid-connected PV system of 34 kWp in Indonesia to investigate the performance of PV systems in tropical climates. The PV system has been installed in Jayapura, the capital of the Province of Papua, Indonesia, by the beginning of 2012. Due to the aged gensets and frequent

Global helioseismology (WP4.1): From the Sun to the stars & solar analogs

Science.gov (United States)

García, Rafael A.

2017-10-01

Sun-as-a star observations put our star as a reference for stellar observations. Here, I review the activities in which the SPACEINN global seismology team (Working Package WP4.1) has worked during the past 3 years. In particular, we will explain the new deliverables available on the SPACEINN seismic+ portal. Moreover, special attention will be given to surface dynamics (rotation and magnetic fields). After characterizing the rotation and the magnetic properties of around 300 solar-like stars and defining proper metrics for that, we use their seismic properties to characterize 18 solar analogues for which we study their surface magnetic and seismic properties. This allows us to put the Sun into context compared to its siblings.

Shelter models and observations

DEFF Research Database (Denmark)

Peña, Alfredo; Bechmann, Andreas; Conti, Davide

This report documents part of the work performed by work package (WP) 3 of the ‘Online WAsP’ project funded by the Danish Energy Technology and Demonstration Program (EUDP). WP3 initially identified the shortcomings of the current WAsP engine for small and medium wind turbines (Peña et al., 2014b......), adapted the WAsP engine to OnlineWAsP (www.wasponline.dk), and made an effort to quantify the error and the uncertainty, first of the obstacle model in WAsP and later ofthe WAsP model chain. This report documents the work done for the obstacle model. In addition, EUDP supports the IEA task 27 on ‘small...... in the wake of a fence. The experiment is the basis of the study of the error and uncertainty of the obstacle models....

Amendment to Validated dynamic flow model

DEFF Research Database (Denmark)

Knudsen, Torben

2011-01-01

The purpose of WP2 is to establish flow models relating the wind speed at turbines in a farm. Until now, active control of power reference has not been included in these models as only data with standard operation has been available. In this report the first data series with power reference excit...... turbine in undisturbed flow. For this data set both the multiplicative model and in particular the simple first order transfer function model can predict the down wind wind speed from upwind wind speed and loading.......The purpose of WP2 is to establish flow models relating the wind speed at turbines in a farm. Until now, active control of power reference has not been included in these models as only data with standard operation has been available. In this report the first data series with power reference...

Effect of a Sulphate Transient on the EAC Crack Growth Behaviour of Low-Alloy RPV Steels under Simulated BWR Operating Conditions (CASTOC WP 3, PSI Test 1)

Energy Technology Data Exchange (ETDEWEB)

Ritter, S.; Seifert, H. P

2002-03-01

Within the CASTOC-project (5th EU FW programme), the environmentally-assisted crack (EAC) growth behaviour of low-alloy reactor pressure vessel (RPV) steels is experimentally investigated under simulated transient and steady-state boiling water reactor (BWR) power operation conditions by six European laboratories. Within WP 3 of this project, the Paul Scherrer Institut (PSI) investigates the effect of water chemistry transients on the EAC crack growth behaviour under periodical partial unloading (PPU) conditions. The present report is a summary of the first PSI test of WP 3 with a Na{sub 2}SO{sub 4} transient. In the first part of the report, the theoretical background on crack growth mechanisms, crack chemistry, mass transport and water chemistry transients as well as a brief literature survey on other water chemistry transient investigations is given. Furthermore, the experimental equipment and test procedure is presented, followed by a summary of the results of PSI test 1 of WP 3. Finally the results are discussed in detail and compared to literature data. In the first part of the experiment, an actively growing EAC crack was generated by PPU in oxygenated high-temperature, high-purity water (T = 288 {sup o}C, DO = 8 ppm, SO{sub 4}{sup 2-} < 0.6 ppb). Then a sulphate transient was applied. The duration ({approx} 300 h) and the amount of sulphate (SO{sub 4}{sup 2-} = 368 ppb) of the applied sulphate transient conservatively covered all sulphate transients, which might occur in BWR/normal water chemistry (NWC) practice. After the transient, outlet conductivity was lowered from ca. 1 {mu}S/cm to less than 0.15 {mu}S/cm within 2.6 h by a 'two-loop technique'. No accelerating effect of the sulphate transient on the EAC crack growth of both tested fracture mechanics specimens under highly oxidising BWR/NWC conditions was observed, making it impossible to deterrnine incubation or delay times. The EAC crack growth rates (CGR) before, during and after the

Global helioseismology (WP4.1: From the Sun to the stars & solar analogs

Directory of Open Access Journals (Sweden)

García Rafael A.

2017-01-01

Full Text Available Sun-as-a star observations put our star as a reference for stellar observations. Here, I review the activities in which the SPACEINN global seismology team (Working Package WP4.1 has worked during the past 3 years. In particular, we will explain the new deliverables available on the SPACEINN seismic+ portal. Moreover, special attention will be given to surface dynamics (rotation and magnetic fields. After characterizing the rotation and the magnetic properties of around 300 solar-like stars and defining proper metrics for that, we use their seismic properties to characterize 18 solar analogues for which we study their surface magnetic and seismic properties. This allows us to put the Sun into context compared to its siblings.

Comparative mutagenesis and interaction between near-ultraviolet (313- to 405-nm) and far-ultraviolet (254-nm) radiation in Escherichia coli strains with differing repair capabilities

International Nuclear Information System (INIS)

Turner, M.A.; Webb, R.B.

1981-01-01

Comparative mutagenesis and possible synergistic interaction between broad-spectrum (313- to 405-nm) near-ultraviolet (black light bulb [BLB]) radiation and 254-nm radiation were studied in Escherichia coli strains WP2 (wild type), WP2s (uvrA), WP10 (recA), WP6 (polA), WP6s (polA uvrA), WP100 (uvrA recA), and WP5 (lexA). With BLB radiation, strains WP2s and WP6s demonstrated a high level of mutagenesis, whereas strains WP2, WP5, WP6, WP10, and WP100 did not demonstrate significant mutagenesis. In contrast, 254-nm radiation was mutagenic in strains WP2, WP2s, WP6, and WP6s, but strains WP5, WP10, and WP100 were not significantly mutated. The absence of mutagenesis by BLB radiation in lexA and recA strains WP10, WP5, and WP100 suggests that lex + rec + repair may play a major role in mutagenesis by both BLB and 254-nm radiation. The hypothesis that BLB radiation selectively inhibits rec + lex + repair was tested by sequential BLB-254 nm radiation. With strain WP2, a fluence of 30 J/m 2 at 254 nm induced trp + revertants at a frequency of 15 x 10 -6 . However, when 10 5 J/m 2 or more BLB radiation preceded the 254-nm exposure, no trp + revertants could be detected. A similar inhibition of 254-nm mutagenesis was observed with strain WP6 (polA). However, strains WP2s (uvrA) and WP6s (polA uvrA) showed enhanced 254-nm mutagenesis when a prior exposure to BLB radiation was given

An analysis of the performance of a 2.6 kWp building integrated photovoltaic installation

International Nuclear Information System (INIS)

Sulaiman Shaari

2000-01-01

This paper presents a summary of an analysis of the performance results of a 2.6 kWp Building integrated Photovoltaic (BIPV) installation. The building has fifty Siemens M55 photovoltaic (PV) modules integrated as part of the roof of the building, grid-interactive via an SMA inverter. Data have been compiled and a detailed analysis of its performance was done using a dedicated BIPV computer model called PVSYST2.0. It was found that the general performance of the system was at the lower end of the spectrum mainly due to inherent architectural design of the building. This came by way of shading on the modules casted by shadow: of existing roofs of the building, and adverse effects from temperature increases on the modules due to the heating regimes in the building and lack of ventilation of the modules. The problem was exacerbated by an inverter-to-PV size ratio mismatch. In addition there had been some teething problems during the earlier periods of operation. Lessons from this experience are drawn up to serve as a precautionary note in designing other BIPV installations, especially valuable for applications in tropical climate countries, like Malaysia. (Author)

Wpływ promocji - na rozwój firmy rodzinnej Ogród Jagi

OpenAIRE

Król-Mamiak, Anna

2012-01-01

Praca dotyczy wpływu działań promocyjnych na rozwój firmy rodzinnej jaką jest Kwiaciarnia Ogród Jagi. To ważny temat, szczególnie obecnie, kiedy małe firmy są wypierane przez duże sklepy sieciowe i powstające galerie handlowe, w których nie ma miejsca na działalność małych, rodzinnych przedsiębiorstw. Barierą jest dla nich między innymi cena wynajmu powierzchni i czynsz płacony właścicielom centrów handlowych. Tym bardziej więc ważne jest pokazanie, jakimi sposobami rodzinne firmy docierają d...

Report 3: Guidance document on practices to model and implement Extreme Weather hazards in extended PSA

International Nuclear Information System (INIS)

Alzbutas, R.; Ostapchuk, S.; Borysiewicz, M.; Decker, K.; Kumar, Manorma; Haeggstroem, A.; Nitoi, M.; Groudev, P.; Parey, S.; Potempski, S.; Raimond, E.; Siklossy, T.

2016-01-01

The goal of this report is to provide guidance on practices to model Extreme Weather hazards and implement them in extended level 1 PSA. This report is a joint deliverable of work package 21 (WP21) and work package 22 (WP22). The general objective of WP21 is to provide guidance on all of the individual hazards selected at the End Users Workshop. This guidance is focusing on extreme weather hazards, namely: extreme wind, extreme temperature and snow pack. Other hazards, however, are considered in cases where they are correlated/ associated with the hazard under discussion. Guidance developed refers to existing guidance whenever possible. As it was recommended by end users this guidance covers questions of developing integrated and/or separated extreme weathers PSA models. (authors)

Analiza wpływu wybranej metodologii oceny mostków cieplnych na bilans energetyczny budynku

Directory of Open Access Journals (Sweden)

Abdrahman Alsabry

2018-04-01

Obliczenia analityczne jednoznacznie pokazują, że przyjęta metodyka wyznaczenia wartości współczynnika liniowego przenikania ciepła mostka cieplnego, znacząco wpływa na charakterystykę energetyczną budynku. Przedstawione w katalogach mostków cieplnych wartości liniowego współczynnika przenikana ciepła dla konkretnych przegród, najczęściej rozwiązań systemowych różnych firm, dają bardziej precyzyjne wartości aniżeli przyjęte na podstawie uproszczonej metodyki zgodnie z normą PN-EN ISO 14683:2008. Przy użyciu obliczeń komputerowych zgodnie z normą PN-EN ISO 10211:2008 wartości współczynnika liniowego przenikania ciepła są odzwierciedleniem rzeczywistych detali konstrukcyjnych. Można zatem jednoznacznie stwierdzić, że obliczenia te są najdokładniejsze. Jednak w porównaniu do katalogów metoda ta wymaga dużo większych nakładów pracy. Zmiana sposobu uwzględnienia wartości mostka termicznego może zmienić wartość wskaźnika nieodnawialnej energii pierwotnej nawet o 20 [kWh/m2rok]. Szczególną uwagę do precyzyjnych analiz strat ciepła przez mostki cieplne powinno się uwzględniać przy projektowaniu budynków pasywnych oraz zero-energetycznych, w których wpływ mostków termicznych stanowić może ponad 20% łącznego zapotrzebowania na ciepło.

CASK/MSC/WP PREPARATION SYSTEM DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

S. Drummond

2005-01-01

The purpose of this system description document (SDD) is to establish requirements that drive the design of the Cask/MSC/WP preparation system and their bases to allow the design effort to proceed to license application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design, as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This type of SDD both leads and trails the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. This SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. This SDD addresses the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]) requirements. Additional PRD requirements may be cited, as applicable, to drive the design of specific aspects of the system, with justifications provided in the basis. Functional and operational requirements applicable to this system are obtained from the ''Project Functional and Operational Requirements'' (F and OR) (Curry 2004 [DIRS 170557]) document. Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (BSC 2004 [DIRS 171599]) and the preclosure safety analyses

Design of a real time market for regulating power. FlexPower WP1 - Report 3

Energy Technology Data Exchange (ETDEWEB)

Bang, C.; Fock, F.; Togeby, M.

2011-12-15

The FlexPower project investigates the possibility of using broadcasted dynamic electricity prices as a simple and low cost means to activating a large number of flexible small-scale power units. The aim is to provide regulating power via an aggregated response from the numerous units on a volunteer basis. The power units could for example be electrical heating and cooling units, electrical vehicles, industrial demand and micro generation. Each power unit can have its own local controller and individual business model and objective function. The optimisation of the local controls may require forecasts of the services requested by the customer (such as heat for a house or charging power for an electrical vehicle) - in terms of quantity, timing and flexibility - and forecasts of the electricity prices. Based on international 'real-time' power market experiences, new dynamic FlexPower market mechanisms to perform regulating power are designed and tested via simulations, under laboratory conditions and in the field. A dedicated simulation tool is developed for this purpose. The FlexPower regulation can never be perfect, but is expected to be able to meet some of the present and future growing demand for regulating power. As a starting point, a 5-minute power price signal, based on the actual regulation power prices, is tested. WP1 addresses the following question: 1) How could a system with a one-way price be designed? How can the FlexPower mechanism be integrated into the present electricity market, including the market for regulating power? This report describes the FlexPower concept, and gives one suggestion as to how this new market could work. How this will affect the different stakeholders is discussed, and risks and opportunities in the new market are presented. (LN)

Synthesis and characterization of the novel rare earth orthophosphates Y0.5Er0.5PO4 and Y0.5Yb0.5PO4

International Nuclear Information System (INIS)

Schildhammer, Daniel; Petschnig, Lucas L.; Fuhrmann, Gerda; Heymann, Gunter; Schottenberger, Herwig; Huppertz, Hubert; Tribus, Martina

2016-01-01

The new mixed rare earth (RE) orthophosphates Y 0.5 Er 0.5 PO 4 and Y 0.5 Yb 0.5 PO 4 were synthesized by a classical solid state reaction in an electrical furnace at 1200 C. As starting materials, the corresponding rare earth oxides and diammonium hydrogen phosphate were used. The powder diffraction analyses revealed that the new compounds Y 0.5 Er 0.5 PO 4 and Y 0.5 Yb 0.5 PO 4 crystallize in a zircon-type structure being isostructural with the rare earth orthophosphate YPO 4 . Y 0.5 Er 0.5 PO 4 and Y 0.5 Yb 0.5 PO 4 crystallize in the tetragonal space group I4 1 /amd (no. 141) with four formula units in the unit cell. The structural parameters based on Rietveld refinements are a = 687.27(2), c = 601.50(2) pm, V = 0.28412(1) nm 3 , R p = 0.0143, and R wp = 0.0186 (all data) for Y 0.5 Er 0.5 PO 4 and a = 684.61(2), c = 599.31(2) pm, V = 0.28089(2) nm 3 , R p = 0.0242, and R wp = 0.0313 (all data) for Y 0.5 Yb 0.5 PO 4 . Furthermore, the structure of Y 0.5 Er 0.5 PO 4 was refined from single-crystal X-ray diffraction data: a = 687.78(5), c = 601.85(4) pm, V = 0.28470(5) nm 3 , R 1 = 0.0165, and wR 2 = 0.0385 (all data). In both compounds, the rare earth metal ions are eightfold coordinated by oxygen atoms, forming two unique interlocking tetrahedra with two individual RE-O distances. The tetrahedral phosphate groups [PO 4 ] 3- are slightly distorted in both compounds. The individual rare earth ions share a common position (Wyckoff site 4a). The presence of two rare earth ions in the structures of the new orthophosphates Y 0.5 Er 0.5 PO 4 and Y 0.5 Yb 0.5 PO 4 was additionally confirmed by single-crystal EDX spectroscopy revealing a ratio of 1:1.

Wpływ wysiłku fizycznego na funkcję układu oddechowego w twardzinie układowej

Directory of Open Access Journals (Sweden)

Stanisław Sierakowski

2010-12-01

Full Text Available Cel: Powikłania ze strony układu oddechowego stanowią główną przyczynę zgonów pacjentów z twardziną układową (TU. Tętniczenadciśnienie płucne i śródmiąższowa choroba płuc stanowią najistotniejszez nich. Pacjenci są jednak często zdiagnozowani dopierow późnym okresie choroby, dlatego też istotne jest opracowaniemetody diagnostycznej do wczesnego wykrywania tych powikłań.Celem pracy była ocena wpływu wysiłku fizycznego na zmiany parametrówoddechowych. Materiały i metody: Badania przeprowadzono wśród 32 pacjentów zezdiagnozowaną TU; 72% pacjentów miało postać ograniczoną TU,28% postać uogólnioną. Wykonywano pomiar zdolności dyfuzyjnejpłuc dla tlenku węgla (DLCO, natężonej pojemności życiowej (FVC,natężonej objętości wydechowej pierwszosekundowej (FEV1 orazcałkowitej pojemności płuc (TLC w spoczynku oraz bezpośrednio pozakończeniu wysiłku fizycznego. Wyniki: Pod wpływem wysiłku fizycznego obserwowano wzrostDLCO od 59,7% do 68,1% wartości należnej (p < 0,005. Nie stwierdzononatomiast istotnych statystycznie zmian wartości FVC, FEV1oraz TLC. Wnioski: U chorych na TU zdolność dyfuzyjna płuc dla tlenku węglapo wysiłku fizycznym uległa istotnej statystycznie poprawiew porównaniu z wartościami spoczynkowymi. Związane jest toz koniecznością zapewnienia właściwego utlenowania krwi tętniczeji wynika m.in. ze zwiększenia pojemności łożyska naczyniowego.W klinicznej interpretacji wartości DLCO należy uwzględniać opróczstężenia hemoglobiny i objętości pęcherzykowej także wpływ wysiłkuoraz związane z nim zmiany wielkości objętości rzutu serca.

KMoWP3O12, a tunnel structure of the KMo2O12-type

International Nuclear Information System (INIS)

Benmoussa, A.; Leclaire, A.; Grandin, A.; Raveau, B.

1989-01-01

Potassium molybdotungstotriphosphate(V), KMoWP 3 O 12 , M r =603.80, orthorhombic, Pbcm, a=8.8180(6), b=9.1574(8), c=12.3836(8) A, V=1000.0(2) A 3 , Z=4, D x =4.01 Mg m -3 , λ(Mo Kα)=0.71073 A, μ=13.9 mm -1 , T=294 K, F(000)=276, R=0.035 and wR=0.042 for 2291 observed reflections. The framework is built up from MoO 6 octahedra and PO 4 tetrahedra which delimit tunnels running along b, where the K ions are located. The structure leads to the formula KMoWO(PO 4 )(P 2 O 7 ). (orig.)

Wpływ rezonansu stochastycznego na równowagę dziecka z Mózgowym Porażeniem Dziecięcym = Influence of stochastic resonance on body balance of children with Cerebral Palsy

OpenAIRE

Srokowski, Grzegorz; Radzimińska, Agnieszka; Weber-Rajek, Magdalena; Piekorz, Zuzanna; Siedlaczek, Marcin; Jasionek, Agnieszka; Srokowska, Anna; Zukow, Walery

2015-01-01

Srokowski Grzegorz, Radzimińska Agnieszka, Weber-Rajek Magdalena, Piekorz Zuzanna, Siedlaczek Marcin, Jasionek Agnieszka, Srokowska Anna, Zukow Walery. Wpływ rezonansu stochastycznego na równowagę dziecka z Mózgowym Porażeniem Dziecięcym = Influence of stochastic resonance on body balance of children with Cerebral Palsy. Journal of Education, Health and Sport. 2015;5(12):521-534. eISSN 2391-8306. DOI http://dx.doi.org/10.5281/zenodo.42266 http://ojs.ukw.edu.pl/index.php/johs/article/view/...

Introducing a rainfall compound distribution model based on weather patterns sub-sampling

Directory of Open Access Journals (Sweden)

F. Garavaglia

2010-06-01

Full Text Available This paper presents a probabilistic model for daily rainfall, using sub-sampling based on meteorological circulation. We classified eight typical but contrasted synoptic situations (weather patterns for France and surrounding areas, using a "bottom-up" approach, i.e. from the shape of the rain field to the synoptic situations described by geopotential fields. These weather patterns (WP provide a discriminating variable that is consistent with French climatology, and allows seasonal rainfall records to be split into more homogeneous sub-samples, in term of meteorological genesis.

First results show how the combination of seasonal and WP sub-sampling strongly influences the identification of the asymptotic behaviour of rainfall probabilistic models. Furthermore, with this level of stratification, an asymptotic exponential behaviour of each sub-sample appears as a reasonable hypothesis. This first part is illustrated with two daily rainfall records from SE of France.

The distribution of the multi-exponential weather patterns (MEWP is then defined as the composition, for a given season, of all WP sub-sample marginal distributions, weighted by the relative frequency of occurrence of each WP. This model is finally compared to Exponential and Generalized Pareto distributions, showing good features in terms of robustness and accuracy. These final statistical results are computed from a wide dataset of 478 rainfall chronicles spread on the southern half of France. All these data cover the 1953–2005 period.

CASK/MSC/WP PREPARATION SYSTEM DESCRIPTION DOCUMENT

Energy Technology Data Exchange (ETDEWEB)

S. Drummond

2005-04-12

The purpose of this system description document (SDD) is to establish requirements that drive the design of the Cask/MSC/WP preparation system and their bases to allow the design effort to proceed to license application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design, as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This type of SDD both leads and trails the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. This SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. This SDD addresses the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]) requirements. Additional PRD requirements may be cited, as applicable, to drive the design of specific aspects of the system, with justifications provided in the basis. Functional and operational requirements applicable to this system are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]) document. Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (BSC 2004 [DIRS 171599]) and the preclosure safety analyses.

Contributions of the German Research Center for Geosciences (GFZ) to the EPOS (European Plate Observing System) Implementation Phase 2015-18

Science.gov (United States)

Hoffmann, T. L.; Lauterjung, J.

2017-12-01

The European Plate Observing System project is currently approaching the end of year two of its four-year Implementation Phase 2015-18 (EPOS-IP). Under the Horizon 2020 Programme INFRADEV-3, the EPOS cyberinfrastructure is being established as an ERIC (European Research Infrastructure Consortium) and encompasses the implementation of both the EPOS Integrated Core Services (ICS) for solid Earth Science and a multitude of EPOS Thematic Core Services (TCS). During year two, a basic set of ICS and TCS services was developed and implemented, so that in October 2017 the validation phase (year 3) of EPOS is ready to be launched. Up to now, various TCS-Elements have integrated different Service Providers (SD) that are delivering Data, Data Products, Services and Software (DDSS) to their specific scientific community. As one of the 29 awardees of the EC grant, the German Research Center for Geosciences (GFZ) plays an important role in the implementation of EPOS and its Thematic and Integrated Core Services. The presented poster will give an overview of GFZ's participation in the work of nine technical EPOS Work Packages (WP7 ICS Development, WP8 Seismology, WP11 Volcano Observations, WP12 Satellite Data, WP13 Geomagnetic Observations, WP14 Anthropogenic Hazards, WP15 Geological Information and Modelling, WP16 Multi-Scale Laboratories and WP17 Geo Energy Test Beds) as well as in four administrative EPOS Work Packages (WP2 Communication, WP3 Harmonization, WP4 Legal & Governance, and WP5 Financial).

Advanced power converters for universal and flexible power management in future electricity network -  Report on Control Strategies

DEFF Research Database (Denmark)

Ciobotaru, Mihai; Iov, Florin; Zanchetta, Pericle

The present document summarizes the work that has been done in Work Package 5 (WP5) where the focus is on modelling and control of the Uniflex-PM system. The models used in the WP5 are described in detail. Since the grid synchronization and monitoring techniques play an important role...... in the control of the Uniflex-PM system, a special attention is paid to this topic. The events in the electrical networks are treated in detail in terms of definitions and classifications from standards, origins, and surveys in different countries. A summary of the grid synchronization and monitoring methods...... is also given with a special focus on Phase Locked Loop systems. The response of the single and three phase PLLs is analyzed under different grid events. Four control strategies are studied in the WP5, namely: synchronous reference frame control, predictive control stationary reference frame control...

Report 6: Guidance document. Man-made hazards and Accidental Aircraft Crash hazards modelling and implementation in extended PSA

International Nuclear Information System (INIS)

Kahia, S.; Brinkman, H.; Bareith, A.; Siklossy, T.; Vinot, T.; Mateescu, T.; Espargilliere, J.; Burgazzi, L.; Ivanov, I.; Bogdanov, D.; Groudev, P.; Ostapchuk, S.; Zhabin, O.; Stojka, T.; Alzbutas, R.; Kumar, M.; Nitoi, M.; Farcasiu, M.; Borysiewicz, M.; Kowal, K.; Potempski, S.

2016-01-01

The goal of this report is to provide guidance on practices to model man-made hazards (mainly external fires and explosions) and accidental aircraft crash hazards and implement them in extended Level 1 PSA. This report is a joint deliverable of work package 21 (WP21) and work package 22 (WP22). The general objective of WP21 is to provide guidance on all of the individual hazards selected at the first ASAMPSA-E End Users Workshop (May 2014, Uppsala, Sweden). The objective of WP22 is to provide the solutions for purposes of different parts of man-made hazards Level 1 PSA fulfilment. This guidance is focusing on man-made hazards, namely: external fires and explosions, and accidental aircraft crash hazards. Guidance developed refers to existing guidance whenever possible. The initial part of guidance (WP21 part) reflects current practices to assess the frequencies for each type of hazards or combination of hazards (including correlated hazards) as initiating event for PSAs. The sources and quality of hazard data, the elements of hazard assessment methodologies and relevant examples are discussed. Classification and criteria to properly assess hazard combinations as well as examples and methods for assessment of these combinations are included in this guidance. In appendixes additional material is presented with the examples of practical approaches to aircraft crash and man-made hazard. The following issues are addressed: 1) Hazard assessment methodologies, including issues related to hazard combinations. 2) Modelling equipment of safety related SSC, 3) HRA, 4) Emergency response, 5) Multi-unit issues. Recommendations and also limitations, gaps identified in the existing methodologies and a list of open issues are included. At all stages of this guidance and especially from an industrial end-user perspective, one must keep in mind that the development of man-made hazards probabilistic analysis must be conditioned to the ability to ultimately obtain a representative risk

Comparative Toxicity and Dosimetric Profile of Whole-Pelvis Versus Prostate Bed-Only Intensity-Modulated Radiation Therapy After Prostatectomy

Energy Technology Data Exchange (ETDEWEB)

Deville, Curtiland, E-mail: deville@uphs.upenn.edu [Department of Radiation Oncology, University of Pennsylvania, Philadelphia, Pennsylvania (United States); Vapiwala, Neha [Department of Radiation Oncology, University of Pennsylvania, Philadelphia, Pennsylvania (United States); Hwang, Wei-Ting [Department of Biostatistics and Epidemiology, University of Pennsylvania, Philadelphia, Pennsylvania (United States); Lin Haibo; Bar Ad, Voichita; Tochner, Zelig; Both, Stefan [Department of Radiation Oncology, University of Pennsylvania, Philadelphia, Pennsylvania (United States)

2012-03-15

Purpose: To assess whether whole-pelvis (WP) intensity modulated radiation therapy (IMRT) for prostate cancer (PCa) after prostatectomy is associated with increased toxicity compared to prostate-bed only (PB) IMRT. Methods and Materials: All patients (n = 67) undergoing postprostatectomy IMRT to 70.2 Gy at our institution from January 2006 to January 2009 with minimum 12-month follow-up were divided into WP (n = 36) and PB (n = 31) comparison groups. WP patients received initial pelvic nodal IMRT to 45 Gy. Pretreatment demographics, bladder and rectal dose-volume histograms, and maximum genitourinary (GU) and gastrointestinal (GI) toxicities were compared. Logistic regression models evaluated uni- and multivariate associations between pretreatment demographics and toxicities. Results: Pretreatment demographics including age and comorbidities were similar between groups. WP patients had higher Gleason scores, T stages, and preoperative prostate-specific antigen (PSA) levels, and more WP patients underwent androgen deprivation therapy (ADT). WP minimum (Dmin) and mean bladder doses, bladder volumes receiving more than 5 Gy (V5) and V20, rectal Dmin, and PB bladder and rectal V65 were significantly increased. Maximum acute GI toxicity was Grade 2 and was increased for WP (61%) vs. PB (29%) patients (p = 0.001); there was no significant difference in acute Grade {>=}2 GU toxicity (22% WP vs. 10% PB; p = 0.193), late Grade {>=}2 GI toxicity (3% WP vs. 0% PB; p = 0.678), or late Grade {>=}2 GU toxicity (28% WP vs. 19% PB; p = 0.274) with 25-month median follow-up (range, 12-44 months). On multivariate analysis, long-term ADT use was associated with Grade {>=}2 late GU toxicity (p = 0.02). Conclusion: Despite dosimetric differences in irradiated bowel, bladder, and rectum, WP IMRT resulted only in clinically significant increased acute GI toxicity in comparison to that with PB IMRT, with no differences in GU or late GI toxicity.

VLLEEM-2 technical workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

In order to overcome the limits of the energy-environment models, and to benefit at the same time of their past experiences, the VLEEM project proposes a genuine approach and innovative modelling tools to assess the energy-environment systems over the very long term, which are based on the strengths of existing long term energy models, but focussed on two major objectives: to describe normative futures which fit with a set of overall constraints, like the stabilisation of the concentration of green-house gases in the atmosphere, or the stabilisation of the overall inventory of plutonium and minor actinides, etc...; to describe and formalize the association of causalities necessary to bring the system from the present situation to the targeted future, through a '' back-casting '' approach. This first technical workshop presents the state of the art of the different Work Programmes. WP1:Enhancement of the Conceptual framework. WP2: Data base on conventional demand/supply technologies. WP3: Complement and up-date technology monographs. WP4: Formalization and computing of final VLEEM submodels. WP5: Case study 2030, 2050, 2100. (A.L.B.)

Candidate Prediction Models and Methods

DEFF Research Database (Denmark)

Nielsen, Henrik Aalborg; Nielsen, Torben Skov; Madsen, Henrik

2005-01-01

This document lists candidate prediction models for Work Package 3 (WP3) of the PSO-project called ``Intelligent wind power prediction systems'' (FU4101). The main focus is on the models transforming numerical weather predictions into predictions of power production. The document also outlines...... the possibilities w.r.t. different numerical weather predictions actually available to the project....

Integrating Growth Stage Deficit Irrigation into a Process Based Crop Model

Science.gov (United States)

Lopez, Jose R.; Winter, Jonathan M.; Elliott, Joshua; Ruane, Alex C.; Porter, Cheryl; Hoogenboom, Gerrit

2017-01-01

Current rates of agricultural water use are unsustainable in many regions, creating an urgent need to identify improved irrigation strategies for water limited areas. Crop models can be used to quantify plant water requirements, predict the impact of water shortages on yield, and calculate water productivity (WP) to link water availability and crop yields for economic analyses. Many simulations of crop growth and development, especially in regional and global assessments, rely on automatic irrigation algorithms to estimate irrigation dates and amounts. However, these algorithms are not well suited for water limited regions because they have simplistic irrigation rules, such as a single soil-moisture based threshold, and assume unlimited water. To address this constraint, a new modeling framework to simulate agricultural production in water limited areas was developed. The framework consists of a new automatic irrigation algorithm for the simulation of growth stage based deficit irrigation under limited seasonal water availability; and optimization of growth stage specific parameters. The new automatic irrigation algorithm was used to simulate maize and soybean in Gainesville, Florida, and first used to evaluate the sensitivity of maize and soybean simulations to irrigation at different growth stages and then to test the hypothesis that water productivity calculated using simplistic irrigation rules underestimates WP. In the first experiment, the effect of irrigating at specific growth stages on yield and irrigation water use efficiency (IWUE) in maize and soybean was evaluated. In the reproductive stages, IWUE tended to be higher than in the vegetative stages (e.g. IWUE was 18% higher than the well watered treatment when irrigating only during R3 in soybean), and when rainfall events were less frequent. In the second experiment, water productivity (WP) was significantly greater with optimized irrigation schedules compared to non-optimized irrigation schedules in

Wpływ aktywności fizycznej w okresie ciąży na przebieg porodu = The influence of physical activity during pregnancy on childbirth

Directory of Open Access Journals (Sweden)

AGNIESZKA KONSTANCJA PAWŁOWSKA-MUC

2015-09-01

3 Ośrodek Kształcenia Podyplomowego Pielęgniarek i Położnych Radomski Szpital Specjalistyczny im. dr Tytusa Chałubińskiego w Radomiu, ul. Lekarska 4   Adres do korespondencji Grażyna Stadnicka Samodzielna Pracownia Umiejętności Położniczych, Wydział Nauk o Zdrowiu, Uniwersytet Medyczny 10-081 Lublin, ul. Staszica 4/6; e-mail:grazyna.stadnicka@umlub.pl   Streszczenie Aktywność fizyczna w czasie ciąży poprawia ogólną kondycję fizyczną i zapobiega dolegliwościom tego okresu. Celem pacy była ocena profilu społeczno-demograficznego kobiet rodzących oraz wpływu aktywności fizycznej w okresie ciąży na przebieg porodu. Materiał i metoda. Badania przeprowadzono wśród 150 rodzących. Narzędzie badawcze stanowiła ankieta własnego autorstwa, skala Borga oraz skala oceny bólu VAS. Wyniki. Badane były w wieku 19-41 lat,  średnia wieku wynosiła 28.7±5.3  lat. Najczęściej podejmowaną przez respondentki aktywnością fizyczną był spacer (n=29; 38.15%, fitness (n=21; 27.63%, joge (n=14; 18.42%, pilates (n=25; 32.89%.Korzystanie z aktywności ruchowej przez kobiety w ciąży było zależne od: wykształcenia (p=0.031, miejsca zamieszkania (p=0.13, statusu zawodowego (0.004 oraz wieku (p=0.042 badanych. Aktywności fizyczna w okresie ciąży miała znamienny statystycznie wpływ na sposób ukończenia ciąży (p=0.024 i wystąpienie samoistnej czynności skurczowej (p=0.001 oraz  bliski istotności statystycznej wpływ na częstość uszkodzenia krocza podczas porodu (0.049. Wnioski. Aktywność fizyczna podczas ciąży nie ma wpływu na częstotliwość okołoporodowych urazów kanału rodnego, w tym nacinania krocza. Natomiast warunkuje wystąpienie samoistnych skurczów porodowych, lepszą tolerancję bólu i wysiłku podczas porodu oraz zmniejsza liczbę cięć cesarskich.   Słowa kluczowe: ciąża, aktywność fizyczna, poród.   Abstract Physical activity during pregnancy, which improves overall physical condition and prevents

Geochemistry Model Validation Report: External Accumulation Model

International Nuclear Information System (INIS)

Zarrabi, K.

2001-01-01

The purpose of this Analysis and Modeling Report (AMR) is to validate the External Accumulation Model that predicts accumulation of fissile materials in fractures and lithophysae in the rock beneath a degrading waste package (WP) in the potential monitored geologic repository at Yucca Mountain. (Lithophysae are voids in the rock having concentric shells of finely crystalline alkali feldspar, quartz, and other materials that were formed due to entrapped gas that later escaped, DOE 1998, p. A-25.) The intended use of this model is to estimate the quantities of external accumulation of fissile material for use in external criticality risk assessments for different types of degrading WPs: U.S. Department of Energy (DOE) Spent Nuclear Fuel (SNF) codisposed with High Level Waste (HLW) glass, commercial SNF, and Immobilized Plutonium Ceramic (Pu-ceramic) codisposed with HLW glass. The scope of the model validation is to (1) describe the model and the parameters used to develop the model, (2) provide rationale for selection of the parameters by comparisons with measured values, and (3) demonstrate that the parameters chosen are the most conservative selection for external criticality risk calculations. To demonstrate the applicability of the model, a Pu-ceramic WP is used as an example. The model begins with a source term from separately documented EQ6 calculations; where the source term is defined as the composition versus time of the water flowing out of a breached waste package (WP). Next, PHREEQC, is used to simulate the transport and interaction of the source term with the resident water and fractured tuff below the repository. In these simulations the primary mechanism for accumulation is mixing of the high pH, actinide-laden source term with resident water; thus lowering the pH values sufficiently for fissile minerals to become insoluble and precipitate. In the final section of the model, the outputs from PHREEQC, are processed to produce mass of accumulation

Results of the benchmark for blade structural models, part A

DEFF Research Database (Denmark)

Lekou, D.J.; Chortis, D.; Belen Fariñas, A.

2013-01-01

A benchmark on structural design methods for blades was performed within the InnWind.Eu project under WP2 “Lightweight Rotor” Task 2.2 “Lightweight structural design”. The present document is describes the results of the comparison simulation runs that were performed by the partners involved within...... Task 2.2 of the InnWind.Eu project. The benchmark is based on the reference wind turbine and the reference blade provided by DTU [1]. "Structural Concept developers/modelers" of WP2 were provided with the necessary input for a comparison numerical simulation run, upon definition of the reference blade...

Pyrobaculum Yellowstonensis Strain WP30 Respires On Elemental Sulfur And/or Arsenate in Circumneutral Sulfidic Sediments of Yellowstone National Park

Energy Technology Data Exchange (ETDEWEB)

Jay, Z.; Beam, Jake; Dohnalkova, Alice; Lohmayer, R.; Bodle, B.; Planer-Friedrich, B.; Romine, Margaret F.; Inskeep, William

2015-09-15

Thermoproteales populations (phylum Crenarchaeota) are abundant in high-25 temperature (>70° C) environments of Yellowstone National Park (YNP) and are important in mediating biogeochemical cycles of sulfur, arsenic and carbon. The objectives of this study were to determine specific physiological attributes of the isolate Pyrobaculum yellowstonensis strain WP30, which was obtained from an elemental sulfur sediment (Joseph’s Coat Hot Spring [JCHS]; 80 °C; pH 6.1), and relate this organism to geochemical processes occurring in situ. Strain WP30 is a chemoheterotroph that utilizes organic carbon as a source of carbon and electrons and requires elemental sulfur and/or arsenic as electron acceptors. Growth in the presence of elemental sulfur and arsenate resulted in the production of thioarsenates and polysulfides relative to sterile controls. The complete genome of this organism was sequenced (1.99 Mb, 58 % G+C) and revealed numerous metabolic pathways for the degradation of carbohydrates, amino acids and lipids, multiple dimethylsulfoxide molybdopterin (DMSO-MPT) oxidoreductase genes, which are implicated in the reduction of sulfur and arsenic, and pathways for the de novo synthesis of nearly all required cofactors and metabolites. Comparative genomics of P. yellowstonensis versus assembled metagenome sequence from JCHS showed that this organisms is highly-related (~95% average nucleotide identity) to in situ populations. The physiological attributes and metabolic capabilities of P. yellowstonensis provide importanat information towards understanding the distribution and function of these populations in YNP.

GPS atmosphere sounding project - An innovative approach for the recovery of atmospheric parameters. WP 232 - Validation of regional models - BALTEX - and contributions to WP 341 and WP 344

Energy Technology Data Exchange (ETDEWEB)

Johnsen, K.P.

2003-07-01

The atmospheric water vapor content is one of the most important parameters for the hydrological cycle. In order to investigate the energy and water balance over the BALTEX study region this report describes comparisons of specific humidity profiles of the hydrostatic High resolution Regional weather forecast Model HRM of the Deutscher Wetterdienst (DWD) with profiles derived from spaceborne radio occultation data of GPS/MET and CHAMP and comparisons with the vertically integrated water vapor (IWV) of different networks of groundbased GPS receivers within Europe. High correlations (with a correlation coefficient around 0.9) between the HRM IWV and GPS IWV were found. It is shown that the analysis data used to initialize the HRM model can explain a large part of the mean difference between the IWV from the model and the GPS data. Specific humidities and the IWVs were determined from the refractivity profiles of the radio occultations of GPS/MET and CHAMP/GPS using an iterative algorithm of Gorbunov and Sokolovski (1993). The comparisons of the specific humidity profiles have shown that both receivers, GPS/MET and CHAMP/GPS, measure significantly lower mean specific humidities below about 4 km than HRM. This is e.g. supported by comparisons between the HRM model and the ECMWF analysis data, between the HRM model and radiosonde ascents at Lindenberg/Germany (which have shown lower mean absolute differences of about 0.2 g/kg) as well as between HRM and further spaceborne data like AMSU-A/B and TERRA/MODIS. Comparisons between CHAMP/GPS and AMSU-A over oceans and AMSU-B over Antarctica show the high value of GPS radio occultations for applications worldwide. (orig.)

Identification of road user related risk factors, Deliverable 5.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Filtness, A. & Papadimitriou, E. (Eds.) Leskovšek, B. Focant, N. Martensen, H. Sgarra, V. Usami, D.S. Soteropoulos, A. Stadlbauer, S. Theofilatos, A. Yannis, G. Ziakopoulos, A. Diamandouros, K. Durso, C. Goldenbeld, C. Loenis, B. Schermers, G. Petegem, J.-H. van Elvik, R. Hesjevoll, I.S. Quigley, C. & Papazikou, E.

2017-01-01

The present Deliverable (D5.1) describes the identification and evaluation of infrastructure related risk factors. It outlines the results of Task 5.1 of WP5 of SafetyCube, which aimed to identify and evaluate infrastructure related risk factors and related road safety problems by (i) presenting a

Synthesis and characterization of the novel rare earth orthophosphates Y{sub 0.5}Er{sub 0.5}PO{sub 4} and Y{sub 0.5}Yb{sub 0.5}PO{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Schildhammer, Daniel; Petschnig, Lucas L.; Fuhrmann, Gerda; Heymann, Gunter; Schottenberger, Herwig; Huppertz, Hubert [Innsbruck Univ. (Austria). Inst. fuer Allgemeine, Anorganische und Theoretische Chemie; Tribus, Martina [Innsbruck Univ. (Austria). Inst. fuer Mineralogie und Petrographie

2016-02-01

The new mixed rare earth (RE) orthophosphates Y{sub 0.5}Er{sub 0.5}PO{sub 4} and Y{sub 0.5}Yb{sub 0.5}PO{sub 4} were synthesized by a classical solid state reaction in an electrical furnace at 1200 C. As starting materials, the corresponding rare earth oxides and diammonium hydrogen phosphate were used. The powder diffraction analyses revealed that the new compounds Y{sub 0.5}Er{sub 0.5}PO{sub 4} and Y{sub 0.5}Yb{sub 0.5}PO{sub 4} crystallize in a zircon-type structure being isostructural with the rare earth orthophosphate YPO{sub 4}. Y{sub 0.5}Er{sub 0.5}PO{sub 4} and Y{sub 0.5}Yb{sub 0.5}PO{sub 4} crystallize in the tetragonal space group I4{sub 1}/amd (no. 141) with four formula units in the unit cell. The structural parameters based on Rietveld refinements are a = 687.27(2), c = 601.50(2) pm, V = 0.28412(1) nm{sup 3}, R{sub p} = 0.0143, and R{sub wp} = 0.0186 (all data) for Y{sub 0.5}Er{sub 0.5}PO{sub 4} and a = 684.61(2), c = 599.31(2) pm, V = 0.28089(2) nm{sup 3}, R{sub p} = 0.0242, and R{sub wp} = 0.0313 (all data) for Y{sub 0.5}Yb{sub 0.5}PO{sub 4}. Furthermore, the structure of Y{sub 0.5}Er{sub 0.5}PO{sub 4} was refined from single-crystal X-ray diffraction data: a = 687.78(5), c = 601.85(4) pm, V = 0.28470(5) nm{sup 3}, R{sub 1} = 0.0165, and wR{sub 2} = 0.0385 (all data). In both compounds, the rare earth metal ions are eightfold coordinated by oxygen atoms, forming two unique interlocking tetrahedra with two individual RE-O distances. The tetrahedral phosphate groups [PO{sub 4}]{sup 3-} are slightly distorted in both compounds. The individual rare earth ions share a common position (Wyckoff site 4a). The presence of two rare earth ions in the structures of the new orthophosphates Y{sub 0.5}Er{sub 0.5}PO{sub 4} and Y{sub 0.5}Yb{sub 0.5}PO{sub 4} was additionally confirmed by single-crystal EDX spectroscopy revealing a ratio of 1:1.

Rifampicin and chloramphenicol effects on DNA replication in ultraviolet-damaged Escherichia coli B/r WP2 thy trp

International Nuclear Information System (INIS)

Doudney, C.O.

1976-01-01

The antibiotic rifampicin, which blocks specifically RNA synthesis, limited DNA replication in Escherichia coli strain B/r WP2 thy trp after an increase of about 50% when added to the incubation medium at the time of replication initiation after ultraviolet fluences of 20 J/m 2 or 25 J/m 2 . Chloramphenicol, which blocks protein synthesis, did not limit DNA replication when added at initiation or any time after. The prolonged lag in DNA replication caused by ultraviolet was not itself responsible for the rifampicin limitation. When a lag of 30 min was caused by starvation for thymine, DNA was synthesized after readdition of thymine to an increase of 100% or more in rifampicin-containing medium. When chloramphenicol was added to an ultraviolet-exposed culture, the limiting effect of rifampicin alone was suppressed. This effect held even with a higher fluence (32.5 J/m 2 ), after which the ability to make DNA in the presence of rifampicin alone was slight. Maximum effect was obtained when the chloramphenicol was added to the ultraviolet-exposed, rifampicin-containing culture immediately before initiation of DNA replication. When rifampicin was present at a concentration of 150 μg/ml (2.2 x 10 -4 M), 3 μg/ml of chloramphenicol (9.2 x 10 -6 M) was as effective as 160 μg/ml (5.0 x 10 -4 M), thus eliminating the possibility that direct stoichiometric interaction of rifampicin and chloramphenicol molecules caused the effect

Organization of pERK-immunoreactive cells in trigeminal spinal nucleus caudalis, upper cervical cord, NTS and Pa5 following capsaicin injection into masticatory and swallowing-related muscles in rats.

Science.gov (United States)

Tsujimura, Takanori; Shinoda, Masamichi; Honda, Kuniya; Hitomi, Suzuro; Kiyomoto, Masaaki; Matsuura, Shingo; Katagiri, Ayano; Tsuji, Kojun; Inoue, Makoto; Shiga, Yoshi; Iwata, Koichi

2011-10-12

Many phosphorylated extracellular signal-regulated kinase (pERK)-immunoreactive (IR) cells are expressed in the trigeminal spinal subnucleus caudalis (Vc), upper cervical spinal cord (C1-C2), nucleus tractus solitarii (NTS) and paratrigeminal nucleus (Pa5) after capsaicin injection into the whisker pad (WP), masseter muscle (MM), digastric muscle (DM) or sternohyoideus muscle (SM). The pERK-IR cells also showed NeuN immunoreactivity, indicating that ERK phosphorylation occurs in neurons. The pERK-IR cells were significantly reduced after intrathecal injection of MEK 1/2 inhibitor PD98059. The pERK-IR cells expressed bilaterally in the Vc and C1-C2 after capsaicin injection into the unilateral DM or SM, whereas unilaterally in the Vc and C1-C2 after unilateral WP or MM injection. After capsaicin injection into the WP or MM, the pERK-IR cell expression in the Vc was restricted rostrocaudally within a narrow area. However, the distribution of pERK-IR cells was more wide spread without a clear peak in the Vc and C1-C2 after capsaicin injection into the DM or SM. In the NTS, the unimodal pERK-IR cell expression peaked at 0-720μm rostral from the obex following capsaicin injection into WP, MM, DM or SM. In the ipsilateral Pa5, many pERK-IR cells were observed following capsaicin injection into the SM. The number of swallows elicited by distilled water administration was significantly smaller after capsaicin injection into the WP, MM or DM but not SM compared to that of vehicle-injected rats. Various noxious inputs due to the masticatory or swallowing-related muscle inflammation may be differentially involved in muscle pain and swallowing reflex activity. Copyright © 2011 Elsevier B.V. All rights reserved.

Wpływ wykształcenia oraz aktywności fizycznej rodziców na poziom rozwoju zdolności szybkościowych dziewcząt wiejskich w młodszym wieku szkolnym

Directory of Open Access Journals (Sweden)

Jarosław Fugiel

2009-06-01

Full Text Available Wstęp: Proces rozwoju motorycznego kształtowany jest przez czynniki biogeograficzne, społeczno-ekonomiczne oraz tryb życia, wynika również ze stanu zaawansowania rozwoju somatycznego. Znaczącą rolę przypisuje się zwłaszcza aktywności fizycznej, której poziom różnicowany jest głównie przez takie czynniki jak płeć, wiek,miejsce zamieszkania czy wykształcenie. Poziom aktywności fizycznej znacznie różni się w środowisku miejskim i wiejskim. Sytuacja ta w dużym stopniu wynika z odmiennych warunków socjalno-bytowych, różnic w ilości i dostępności do bazy sportowej oraz niższej świadomości dotyczącej promocji zdrowia. Również wykształcenie rodziców, które wpływa na poziom świadomości dotyczącej kształtowania rozwoju fizycznego potomstwa, jest niższe na wsi w porównaniu do populacji miejskiej. Czynniki te mogą decydować o poziomie i charakterze aktywności fizycznej oraz mogą wpływać na sprawność motoryczną dzieci i młodzieży wiejskiej. Celem pracy była ocena wpływu wykształcenia oraz aktywności fizycznej rodziców na poziom sprawności motorycznej dziewcząt wiejskich z Legnicko-Głogowskiego Zagłębia Miedziowego. Materiał i metody: Materiał do pracy zgromadzono w 1998 r. na terenie Zagłębia Miedziowego. Zbadano 69 dziewcząt w wieku 9 lat z wiejskich szkół okolic Legnicy i Głogowa. Zmierzono wysokość i masę ciała oraz przeprowadzono testy sprawności fizycznej: skok w dal z miejsca, rzut 1 kg piłką lekarską, bieg wahadłowy 10x5m i stukanie w krążki. Informacje na temat wykształcenia rodziców oraz ich aktywności fizycznej w zakresie uprawiania sportu uzyskano za pomocą ankiety. W analizie wykorzystano podstawowe obliczenia statystyczne oraz obliczono test t-Studenta dla grup niezależnych. Wyniki i wnioski: 1. Wykształcenie średnie lub wyższe ojca i matki wpływa na uzyskanie wyższego poziomu rozwoju somatycznego córek. Dziewczęta z tych grup uzyskują r

STRUCTURAL CALCULATIONS FOR THE LIFTING IN VERTICAL ORIENTATION OF 5-DHLW/DOE SNF SINGLE CRM WASTE PACKAGES

International Nuclear Information System (INIS)

S. Mastilovic

1999-01-01

The purpose of this activity is to determine the structural response of the extension of outer shell (which is referred to as skirt throughout this document) designs of both long and short design concepts of 5-Defense High-Level Waste (DHLW) Department of Energy (DOE) spent nuclear fuel (SNF) single corrosion resistant material (CRM) waste packages (WP), subjected to a gravitational load in the course of lifting in vertical orientation. The scope of this document is limited to reporting the calculation results in terms of stress intensity magnitudes. This activity is associated with the WP design; calculations are performed by the Waste Package Design group. AP-3.124, Revision 0, ICN 0, Calculations, is used to perform the calculation and develop the document

Thermal-hydrological models

Energy Technology Data Exchange (ETDEWEB)

Buscheck, T., LLNL

1998-04-29

This chapter describes the physical processes and natural and engineered system conditions that affect thermal-hydrological (T-H) behavior in the unsaturated zone (UZ) at Yucca Mountain and how these effects are represented in mathematical and numerical models that are used to predict T-H conditions in the near field, altered zone, and engineered barrier system (EBS), and on waste package (WP) surfaces.

Wpływ wysiłku fizycznego na funkcję układu oddechowego w twardzinie układowej

OpenAIRE

Stanisław Sierakowski; Ewa Gińdzieńska-Sieśkiewicz; Maciej Kaczmarski; Zenon Siergiejko; Grzegorz Siergiejko; Piotr Siergiejko; Justyna Fryc

2010-01-01

Cel: Powikłania ze strony układu oddechowego stanowią główną przyczynę zgonów pacjentów z twardziną układową (TU). Tętniczenadciśnienie płucne i śródmiąższowa choroba płuc stanowią najistotniejszez nich. Pacjenci są jednak często zdiagnozowani dopierow późnym okresie choroby, dlatego też istotne jest opracowaniemetody diagnostycznej do wczesnego wykrywania tych powikłań.Celem pracy była ocena wpływu wysiłku fizycznego na zmiany parametrówoddechowych. Materiały i metody: Badania przeprowadzono...

THESEUS Deliverable ID2.5

DEFF Research Database (Denmark)

Nørgaard, Jørgen Harck; Andersen, Thomas Lykke; Burcharth, Hans F.

2012-01-01

As a consequence of climate changes, coastal defenses are worldwide at higher risk of failure. Climate changes can lead to problems in terms of function, stability, and safety of goods and persons. To overcome the problems, different scenarios can be adopted, such as; 1) no upgrade actions...... and repairing the damages 2) upgrade of existing defences by e.g. changing the structure dimensions 3) perform strategic retreat and decommissioning. Within the THESEUS project, the present work task, WT 2.5, focus on upgrading existing rubble mound breakwater defences. Solutions for upgrading parts of rubble...... mound structures are investigated by means of modifying the structure profile and/or adding structure elements. Results from this study will be incorporated in the THESEUS decision tool (DSS-tool) and in the guidelines in work package 5 (WP.5)....

Description of SODAR data storage. WISE project WP2

International Nuclear Information System (INIS)

Barhorst, S.A.M.; Verhoef, J.P.; Van der Werff, P.A.; Eecen, P.J.

2003-10-01

The partners in the WISE project are investigating whether application of the SODAR (sonic detection and ranging) measurement technique in wind energy experimental work is feasible as a replacement for cup anemometers and wind direction sensors mounted on tall meteorological masts both from the view of accuracy and cost. In Work Package 2 (WP2) of the WISE project extensive controlled experiments with the SODAR have been performed. For example, SODAR measurements have been compared with measurements from nearby masts and different brands of SODARs have been compared. Part of the work package was the creation of a database to gather the measured SODAR data. The database was created by ECN in order to enable further analysis by the partners in the project. The database structure that has been defined by ECN is described in full detail. The database is based on SQL (structured query language), and care is taken that data that is unchanged during a measurement period is only stored once. The logic behind the structure is described and the relations between the various tables are described. Up to now the description of the database is limited to include SODAR data measured close to a meteorological mast. Power measurements from wind turbines are not yet included. However, the database can easily be extended to include these data. The data measured by means of the ECN SODAR have completely been re-processed. A new directory structure was defined which is accessible from both the Unix (Linux) and the Microsoft Windows platform. The processed and validated data have been stored in a database to make retrieval of specific data sets possible. The database is also accessible from the Windows platform. The defined format is available for the WISE project, so that the database containing data from all partners can be created

[Carbon footprint of wheat-summer direct-seeding peanut planting system in Shandong Pro-vince, China].

Science.gov (United States)

Ziu, Xiao Xia; Zhang, Xiao Jun; Wang, Yue Fu; Wang, Ming Lun

2018-03-01

Clarifying the carbon emissions in wheat-summer direct-seeding peanut planting (W-P) system could help realize the synergistic effects of high yield and low carbon emissions. Based on whole life cycle method, we constructed a carbon footprint model to calculate the carbon emissions of W-P system. We found that the net income of W-P system was 71.2%-88.3% higher than that of wheat-maize rotation (W-M) system. The carbon emissions per unit area under W-P system was 6977.9-8018.5 kg·hm -2 , being 6.2% higher than that of W-M system. The carbon emission of per net income under W-P system was 0.23-0.28 kg CO 2 -eq·yuan -1 , which was 37.4%-44.1% lower than that of W-M system. Combining the net income and carbon emissions of per net income, W-P system could achieve synergistic effects of high yield and low carbon emissions, which would fulfill the targets of agricultural supply-side structural reform with optimizing supply, enhancing quality and efficiency, and increasing income of peasants.

Effect of Loading Transients on the EAC Crack Growth Behaviour of Low-Alloy RPV Steels under Simulated BWR Operating Conditions (CASTOC WP 3, PSI Tests 3 and 4)

Energy Technology Data Exchange (ETDEWEB)

Ritter, S.; Seifert, H.-P

2003-04-01

Within the CASTOC-project (5{sup t}h EU FW programme), the environmentally-assisted crack (EAC) growth behaviour of low-alloy reactor pressure vessel (RPV) steels is experimentally investigated under simulated transient and steady-state boiling water reactor (BWR) power operation conditions by six European laboratories. The present report is a summary of the third and fourth test of working package (WP) 3 with loading transients, performed at Paul Scherrer Institut (PSI). Two different low-alloy steels (20 MnMoNi 5 5, 0.015 wt.% S and 22 NiMoCr 3 7, 0.007 wt. %S) were investigated in oxygenated high-temperature, high-purity water (T = 240 {sup o}C, DO = 400 ppb) in a daisy chain at two different load ratios (R = 0.8 and 0.2). In the first part of the experiments, asymmetrical saw tooth loading with different rise times {delta}t{sub R} of the load and different loading frequencies were applied. Then the loading conditions were changed to an asymmetrical trapezoid waveform loading (periodical partial unloading, PPU) and the hold time {delta}t{sub H} at maximum load was varied. In the final phase of WP 3 PSI tests 3 and 4 the SCC behaviour was investigated under constant load. With decreasing loading frequency the corrosion fatigue (CF) crack advance per cycle {delta}a/{delta}N{sub EAC} of material A increased. Sustained EAC crack growth could be maintained down to low frequencies of 10{sup -5} Hz. The time-based crack growth rate (CGR) da/dt{sub EAC} decreased with decreasing frequency. In material B no effect of the loading frequency could be resolved. Up to a hold time of 1 h at maximum constant load the CGR da/dt{sub EAC} seemed to be independent of the hold time. Above hold times of 1 h the CGR decreased and dropped down to CGR values in the range or below the BWR VIP 60 SCC disposition lines. This behaviour was observed in both investigated materials. The cycle-based CGR {delta}a/{delta}N{sub EAC} remained approximately constant with increasing hold time. The

Combination of pneumococcal surface protein A (PspA with whole cell pertussis vaccine increases protection against pneumococcal challenge in mice.

Directory of Open Access Journals (Sweden)

Maria Leonor S Oliveira

Full Text Available Streptococcus pneumoniae is the leading cause of respiratory acute infections around the world. In Latin America, approximately 20,000 children under 5 years of age die of pneumococcal diseases annually. Pneumococcal surface protein A (PspA is among the best-characterized pneumococcal antigens that confer protection in animal models of pneumococcal infections and, as such, is a good alternative for the currently available conjugated vaccines. Efficient immune responses directed to PspA in animal models have already been described. Nevertheless, few low cost adjuvants for a subunit pneumococcal vaccine have been proposed to date. Here, we have tested the adjuvant properties of the whole cell Bordetella pertussis vaccine (wP that is currently part of the DTP (diphtheria-tetanus-pertussis vaccine administrated to children in several countries, as an adjuvant to PspA. Nasal immunization of BALB/c mice with a combination of PspA5 and wP or wP(low--a new generation vaccine that contains low levels of B. pertussis LPS--conferred protection against a respiratory lethal challenge with S. pneumoniae. Both PspA5-wP and PspA5-wP(low vaccines induced high levels of systemic and mucosal antibodies against PspA5, with similar profile, indicating no essential requirement for B. pertussis LPS in the adjuvant properties of wP. Accordingly, nasal immunization of C3H/HeJ mice with PspA5-wP conferred protection against the pneumococcal challenge, thus ruling out a role for TLR4 responses in the adjuvant activity and the protection mechanisms triggered by the vaccines. The high levels of anti-PspA5 antibodies correlated with increased cross-reactivity against PspAs from different clades and also reflected in cross-protection. In addition, passive immunization experiments indicated that antibodies played an important role in protection in this model. Finally, subcutaneous immunization with a combination of PspA5 with DTP(low protected mice against challenge with two

Bioclim Deliverable D10 - 12: development and application of a methodology for taking climate-driven environmental change into account in performance assessments

International Nuclear Information System (INIS)

2004-01-01

The BIOCLIM project on modelling sequential Biosphere systems under Climate change for radioactive waste disposal is part of the EURATOM fifth European framework programme. The project was launched in October 2000 for a three-year period. The project aims at providing a scientific basis and practical methodology for assessing the possible long term impacts on the safety of radioactive waste repositories in deep formations due to climate and environmental change. Five work packages have been identified to fulfill the project objectives: - Work package 1 will consolidate the needs of the European agencies of the consortium and summarize how environmental change has been treated to date in performance assessments. - Work packages 2 and 3 will develop two innovative and complementary strategies for representing time series of long term climate change using different methods to analyse extreme climate conditions (the hierarchical strategy) and a continuous climate simulation over more than the next glacial-interglacial cycle (the integrated strategy). - Work package 4 will explore and evaluate the potential effects of climate change on the nature of the biosphere systems. - Work package 5 will disseminate information on the results obtained from the three year project among the international community for further use. The output from the climate models developed and applied in WP2 and WP3 has been interpreted in WP4 ('Biosphere system description') in terms of model requirements for the post-closure radiological performance assessment of deep geological repositories for radioactive wastes, in order to develop a methodology to demonstrate how biosphere systems can be represented in the long-term. The work undertaken in WP4 is described in this report. This report describes the methodology used for identification and characterisation of specific climate states and transitions between those climate states. It also covers the application of those methods in the context of

One sector models, indeterminacy, and productive public spending

Czech Academy of Sciences Publication Activity Database

Slobodyan, Sergey

-, č. 293 (2006), s. 1-24 ISSN 1211-3298 Institutional research plan: CEZ:MSM0021620846 Keywords : indeterminacy * absolute instability * productive public spending Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp293.pdf

Deliverable 5.2 Study report on consumer motivations and behaviours for fruits and fruit products in the Balkans

NARCIS (Netherlands)

Sijtsema, S.J.; Snoek, H.M.

2010-01-01

It is unclear whether fruit consumption in Western Balkan countries (WBC) meets recommended levels from a health perspective. A better understanding consumers' perception of health and motives and barriers of fruit is necessary to get insight in the fruit consumption. The aim of WP 5 is therefore to

Indeterminacy and stability in a modified Romer model

Czech Academy of Sciences Publication Activity Database

Slobodyan, Sergey

2002-01-01

Roč. 2002, č. 205 (2002), s. 1-27 ISSN 1211-3298 Institutional research plan: CEZ:AV0Z7085904 Keywords : indeterminacy * stability Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp205.pdf

WATER DIVERSION MODEL

International Nuclear Information System (INIS)

J.B. Case

1999-01-01

The distribution of seepage in the proposed repository will be highly variable due in part to variations in the spatial distribution of percolations. The performance of the drip shield and the backfill system may divert the water flux around the waste packages to the invert. Diversion will occur along the drift surface, within the backfill, at the drip shield, and at the Waste Package (WP) surface, even after the drip shield and WP have been breached by corrosion. The purpose and objective of this Analysis and Modeling Report (AMR) are to develop a conceptual model and constitutive properties for bounding the volume and rate of seepage water that flows around the drip shield (CRWMS MandO 1999c). This analysis model is to be compatible with the selected repository conceptual design (Wilkins and Heath, 1999) and will be used to evaluate the performance of the Engineered Barrier System (EBS), and to provide input to the EBS Water Distribution and Removal Model. This model supports the Engineered Barrier System (EBS) postclosure performance assessment for the Site Recommendation (SR). This document characterizes the hydrological constitutive properties of the backfill and invert materials (Section 6.2) and a third material that represents a mixture of the two. These include the Overton Sand which is selected as a backfill (Section 5.2), crushed tuff which is selected as the invert (Section 5.1), and a combined material (Sections 5.9 and 5.10) which has retention and hydraulic conductivity properties intermediate to the selected materials for the backfill and the invert. The properties include the grain size distribution, the dry bulk density and porosity, the moisture retention, the intrinsic permeability, the relative permeability, and the material thermal properties. The van Genuchten relationships with curve fit parameters are used to define the basic retention relationship of moisture potential to volumetric moisture content, and the basic relationship of

WATER DIVERSION MODEL

Energy Technology Data Exchange (ETDEWEB)

J.B. Case

1999-12-21

The distribution of seepage in the proposed repository will be highly variable due in part to variations in the spatial distribution of percolations. The performance of the drip shield and the backfill system may divert the water flux around the waste packages to the invert. Diversion will occur along the drift surface, within the backfill, at the drip shield, and at the Waste Package (WP) surface, even after the drip shield and WP have been breached by corrosion. The purpose and objective of this Analysis and Modeling Report (AMR) are to develop a conceptual model and constitutive properties for bounding the volume and rate of seepage water that flows around the drip shield (CRWMS M&O 1999c). This analysis model is to be compatible with the selected repository conceptual design (Wilkins and Heath, 1999) and will be used to evaluate the performance of the Engineered Barrier System (EBS), and to provide input to the EBS Water Distribution and Removal Model. This model supports the Engineered Barrier System (EBS) postclosure performance assessment for the Site Recommendation (SR). This document characterizes the hydrological constitutive properties of the backfill and invert materials (Section 6.2) and a third material that represents a mixture of the two. These include the Overton Sand which is selected as a backfill (Section 5.2), crushed tuff which is selected as the invert (Section 5.1), and a combined material (Sections 5.9 and 5.10) which has retention and hydraulic conductivity properties intermediate to the selected materials for the backfill and the invert. The properties include the grain size distribution, the dry bulk density and porosity, the moisture retention, the intrinsic permeability, the relative permeability, and the material thermal properties. The van Genuchten relationships with curve fit parameters are used to define the basic retention relationship of moisture potential to volumetric moisture content, and the basic relationship of unsaturated

Harm perception, attitudes and predictors of waterpipe (shisha) smoking among secondary school adolescents in Al-Hassa, Saudi Arabia.

Science.gov (United States)

Amin, Tarek Tawfik; Amr, Mostafa Abdel Monem; Zaza, Burhan Omar; Suleman, Wassem

2010-01-01

This study aimed to determine the prevalence and social determinants of waterpipe (WP) smoking among secondary school students in Al-Hassa, Saudi Arabia and to assess their health related knowledge and attitudes toward WP. A cross-sectional study was conducted with 1,652 Saudi secondary school students of both genders aged between 15-19 years selected by multistage sampling method. A self-administered anonymous Arabic version of Global Youth Tobacco Survey modified with items dedicated to WP smoking and to assess perception of health related hazards and attitudes towards WP was employed for data collection. Prevalence of current smokers 'all forms' was 30.3% among males (C.I= 27.5- 33.2%) and 8.5% in females (C.I= 6.6-10.9%). WP was used by 53.9% of the current tobacco users, significantly higher among older age students. Of the regular WP smokers, 20.7% smoked WP on daily basis, 23.8% weekly, 64.2% stated using flavored " Muassel " tobacco. Primary motives for WP smoking were outings with friends, company, boredom and wasting time. Of the total, 49.7% of students stated that WP smoking is less harmful than cigarettes, 60.5% believed that harmful substances were purified through water filtration, with non-addictive properties in 67.8%. Knowledge about health hazards of WP smoking was low, irrespective of student's smoking status. WP smoking is more socially acceptable than cigarettes (52.1%), represents a good opportunity for gathering of friends and family (33.8%), and smoking of WP can relieve stress and tensions (37.8%). Hierarchical regression analysis showed that socializing motives, cigarette smoking, smoking among close family and friends, male gender and increasing age were positive predictors for WP smoking. Social acceptability, poor knowledge of WP health related hazards and certain socio demographics are favoring the increasing current trend of WP use among adolescents in Al Hassa, Saudi Arabia.

Comparative evaluation of the impact of WRF/NMM and WRF/ARW meteorology on CMAQ simulations for PM2.5 and its related precursors during the 2006 TexAQS/GoMACCS study

Directory of Open Access Journals (Sweden)

S. T. Rao

2012-05-01

Full Text Available This study presents a comparative evaluation of the impact of WRF-NMM and WRF-ARW meteorology on CMAQ simulations of PM2.5, its composition and related precursors over the eastern United States with the intensive observations obtained by aircraft (NOAA WP-3, ship and surface monitoring networks (AIRNow, IMPROVE, CASTNet and STN during the 2006 TexAQS/GoMACCS study. The results at the AIRNow surface sites show that both ARW-CMAQ and NMM-CMAQ reproduced day-to-day variations of observed PM2.5 and captured the majority of observed PM2.5 within a factor of 2 with a NMB value of −0.4% for ARW-CMAQ and −18% for NMM-CMAQ. Both models performed much better at the urban sites than at the rural sites, with greater underpredictions at the rural sites. Both models consistently underestimated the observed PM2.5 at the rural IMPROVE sites by −1% for the ARW-CMAQ and −19% for the NMM-CMAQ. The greater underestimations of SO42−, OC and EC by the NMM-CMAQ contributed to increased underestimation of PM2.5 at the IMPROVE sites. The NMB values for PM2.5 at the STN urban sites are 15% and −16% for the ARW-CMAQ and NMM-CMAQ, respectively. The underestimation of PM2.5 at the STN sites by the NMM-CMAQ mainly results from the underestimations of the SO42−, NH4+ and TCM components, whereas the overestimation of PM2.5 at the STN sites by the ARW-CMAQ results from the overestimations of SO42−, NO3−, and NH4+. The Comparison with WP-3 aircraft measurements reveals that both ARW-CMAQ and NMM-CMAQ have very similar model performance for vertical profiles for PM2.5 chemical components (SO42−, NH4+ and related gaseous species (HNO3, SO2, NH3, isoprene, toluene, terpenes as both models used the same chemical mechanisms and emissions. The results of ship along the coast of southeastern Texas over the Gulf of Mexico show that both models captured the temporal variations and broad synoptic change seen in the observed HCHO and acetaldehyde with the means NMB 2.

Non-targeted effects of ionising radiation (note). A new European integrated project, 2006-2010

International Nuclear Information System (INIS)

Salomaa, S.; Wright, E.G.; Hildebrandt, G.; Kadhim, M.; Little, M.P.; Prise, K.M.; Belyakov, O.V.

2007-01-01

Complete text of publication follows. The general objectives of the NOTE project are: (1) to investigate the mechanisms of nontargeted effects, in particular, bystander effects, genomic instability and adaptive response; (2) to investigate if and how non-targeted effects modulate the cancer risk in the low dose region, and whether they relate to protective or harmful functions; (3) to investigate if ionising radiation can cause non-cancer diseases or beneficial effects at low and intermediate doses; (4) to investigate individual susceptibility and other factors modifying non-targeted responses; (5) to assess the relevance of non-targeted effects for radiation protection and to set the scientific basis for a modern, more realistic, radiation safety system; (6) to contribute to the conceptualisation of a new paradigm in radiation biology that would cover both the classical direct (DNA-targeted) and non-targeted (indirect) effects. The NOTE brings together 19 major European and Canadian groups involved in the discovery, characterisation and mechanistic investigation of non-targeted effects of ionising radiation in cellular, tissue and animal models. The NOTE research activities are organised in six work packages. Four work packages (WPs 2-5) are problem-oriented, focussing on major questions relevant for the scientific basis of the system of radiation protection: WP2 Mechanisms of non-targeted effects, WP3 Non-cancer diseases, WP4 Factors modifying non-targeted responses, WP5 Modelling of non-targeted effects. The integration activities provided by WP6 strengthen the collaboration by supporting the access to infrastructures, mobility and training. WP7 provides dissemination and exploitation activities in the form of workshops and a public website. Managerial activities (WP1) ensure the organisation and structures for decision making, monitoring of progress, knowledge management and efficient flow of information and financing. Coordinator of the NOTE project is Prof

A Unified Model of Phantom Energy and Dark Matter

Directory of Open Access Journals (Sweden)

Douglas Singleton

2008-01-01

Full Text Available To explain the acceleration of the cosmological expansion researchers have considered an unusual form of mass-energy generically called dark energy. Dark energy has a ratio of pressure over mass density which obeys $w=p/ ho <-1/3$. This form of mass-energy leads to accelerated expansion. An extreme form of dark energy, called phantom energy, has been proposed which has $w=p/ ho <-1$. This possibility is favored by the observational data. The simplest model for phantom energy involves the introduction of a scalar field with a negative kinetic energy term. Here we show that theories based on graded Lie algebras naturally have such a negative kinetic energy and thus give a model for phantom energy in a less ad hoc manner. We find that the model also contains ordinary scalar fields and anti-commuting (Grassmann vector fields which act as a form of two component dark matter. Thus from a gauge theory based on a graded algebra we naturally obtained both phantom energy and dark matter.

Genetic toxicology of metal compounds: I. Induction of lambda prophage in E coli WP2/sub s/(lambda)

Energy Technology Data Exchange (ETDEWEB)

Rossman, T.G.; Molina, M.; Meyer, L.W.

1984-01-01

A number of metal compounds have been shown to be human carcinogens. Others, while not proven human carcinogens, are able to cause tumors in laboratory animals. Short-term bacterial assays for genotoxic effects have not been successful in predicting the carcinogenicity of metal compounds. The ability of some metal compounds to cause the induction of lambda prophage in E coli WP2/sub s/(lambda) is reported. By far the strongest inducing ability was observed with K/sub 2/CrO/sub 4/. With the exception of chromate, long-term exposures in a narrow, subtoxic dose range were required in order to demonstrate phage induction. A new microtiter assay for lambda prophage induction, which incorporates these features, is described. This system also was able to detect very small amounts of organic carcinogens.

Report on 1Y and 6M child models

NARCIS (Netherlands)

Meyer, F.; Deck, C.; Rodarius, C.; Meijer, R.; Yang, J.

2011-01-01

This document is the deliverable D.2.3.2 of the CASPER project. It has been done in the framework of WP2 “Child human body modeling” task 2.3 “Develop specific human segments and whole body models per age”. This task aims to provide the meshing of the whole body models of the 1 year old child (1

Optimal government policies in models with heterogeneous agents

Czech Academy of Sciences Publication Activity Database

Boháček, Radim; Kejak, Michal

-, č. 272 (2005), s. 1-55 ISSN 1211-3298 Institutional research plan: CEZ:AV0Z70850503 Keywords : optimal macroeconomic policy * optimal taxation * distribution of wealth and income Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp272.pdf

Preliminary ECLSS waste water model

Science.gov (United States)

Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

1991-01-01

A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

Medium strength self-compacting concrete containing fly ash: Modelling using factorial experimental plans

Energy Technology Data Exchange (ETDEWEB)

Mohammed Sonebi [University of Paisley, Paisley (United Kingdom). Advanced Concrete and Masonry Centre

2004-07-01

This investigation aims to develop medium strength self-compacting concrete (MS-SCC). The cost of materials will be decreased by reducing the cement content and by using pulverised fuel ash (PFA) with a minimum amount of superplasticizer (SP). A factorial design was carried out to mathematically model the influence of five key parameters on filling and passing abilities, segregation and compressive strength, which are important for the successful development of medium strength self-compacting concrete incorporating PFA. The parameters considered in the study were the contents of cement and PFA, water-to-powder (cement+PFA) ratio (W/P) and dosage of SP. The responses of the derived statistical models are slump flow, fluidity loss, Orimet time, V-funnel time, L-box, JRing combined to the Orimet, JRing combined to cone, rheological parameters, segregation and compressive strength at 7, 28 and 90 days. Twenty-one mixes were prepared to derive the statistical models, and five were used for the verification and the accuracy of the developed models. The models are valid for mixes made with 0.38 to 0.72 W/P, 60 to 216 kg/m{sup 3} of cement content, 183 to 317 kg/m{sup 3} of PFA and 0% to 1% of SP, by mass of powder. The influences of W/P, cement and PFA contents, and the dosage of SP were characterised and analysed using polynomial regression, which can identify the primary factors and their interactions on the measured properties. The results show tha MS-SCC can be achieved with a 28-day compressive strength of 30 to 35 MPa by using up to 210 kg/m{sup 3} of PFA.

EMPOWER. Deliverable no 5.1 EMPOWERING a reduction in use of conventionally fuelled vehicles using positive policy measures - Living Lab Plan

NARCIS (Netherlands)

Groenewolt, B.; Hjalmarsson, A.; Amelsfort, D. van; Hodgson, F.; Grant-Muller, S.; Sahala, S.; Weerdt, C.A. van der

2016-01-01

Through a literature and case study review ten key success factors to support the design and implementation of incentive-scheme based business models within EMPOWER promoting reduction of CFV use were identified, which will provide input to both other tasks within WP 3 as wells as tasks in other

The ENCCA-WP7/EuroSarc/EEC/PROVABES/EURAMOS 3rd European Bone Sarcoma Networking Meeting/Joint Workshop of EU Bone Sarcoma Translational Research Networks; Vienna, Austria, September 24-25, 2015. Workshop Report

NARCIS (Netherlands)

Kager, L.; Whelan, J.; Dirksen, U.; Hassan, B.; Anninga, J.; Bennister, L.; Bovee, J.V.; Brennan, B.; Broto, J.M.; Brugieres, L.; Cleton-Jansen, A.M.; Copland, C.; Dutour, A.; Fagioli, F.; Ferrari, S.; Fiocco, M.; Fleuren, E.D.; Gaspar, N.; Gelderblom, H.; Gerrand, C.; Gerss, J.; Gonzato, O.; Graaf, W.T. van der; Hecker-Nolting, S.; Herrero-Martin, D.; Klco-Brosius, S.; Kovar, H.; Ladenstein, R.; Lancia, C.; Ledeley, M.C.; McCabe, M.G.; Metzler, M.; Myklebost, O.; Nathrath, M.; Picci, P.; Potratz, J.; Redini, F.; Richter, G.H.; Reinke, D.; Rutkowski, P.; Scotlandi, K.; Strauss, S.; Thomas, D; Tirado, O.M.; Tirode, F.; Vassal, G.; Bielack, S.S.

2016-01-01

This report summarizes the results of the 3rd Joint ENCCA-WP7, EuroSarc, EEC, PROVABES, and EURAMOS European Bone Sarcoma Network Meeting, which was held at the Children's Cancer Research Institute in Vienna, Austria on September 24-25, 2015. The joint bone sarcoma network meetings bring together

The Prevalence, Attitudes, and Correlates of Waterpipe Smoking Among High School Students in Iran: a Cross-Sectional Study.

Science.gov (United States)

Ziaei, Reza; Mohammadi, Reza; Dastgiri, Saeed; Viitasara, Eija; Rahimi, Vahab Asl; Jeddi, Abolfazl; Soares, Joaquim

2016-12-01

The purpose of the present study was to determine the correlates of waterpipe (WP) smoking among 15-17-year-old high school students in Iran. Data were collected using the Global Youth Tobacco Survey (GYTS), a self-administrated questionnaire distributed to a representative sample of high school students aged 15-17 in the city of Tabriz. Current WP smoking was defined as past 30-day use, and ever WP smoking was defined as at least one or two lifetime puffs. Differences in WP use, knowledge, and attitudes were analyzed using chi-square and Fisher exact tests. Binary logistic regression estimated the association between relevant independent variables (e.g., age) and the dependent variables (current/ever WP smoking). Of 1517 students, 21.6 % (95 % confidence interval [CI] = 19.5, 23.8) were ever WP smokers, and 9.7 % (95 % CI = 8.2, 11.2) were current WP smokers. Of current WP smokers, 40.3 % have stated that they want to stop smoking now. Moreover, 14.1 % of non-WP smokers reported that they might enjoy smoking WP. Of current WP smokers, 49.0 % have smoked at cafés. Additionally, 95.3 % of current WP smokers reported that their age did not prevent them from being served a WP. Studying in high school third grade (adjusted odds ratios (AORs) = 1.70; 95 % CI [1.10, 2.63]), experience of cigarette smoking (AORs = 1.57; 95 % CI [1.12, 2.20]), and being prepared to accept a WP offered by close friends (AORs = 3.31; 95 % CI [2.17, 5.04]) were independently associated with ever WP smoking, and accepting a WP offered by close friends (AORs = 4.36; 95 % CI [2.69, 7.07]) and gender (female) (AORs = 0.45; 95 % CI [0.30, 0.70] were independently associated with current WP smoking. Prevalence of current and ever WP smoking is high in Tabriz. There is an urgent need to design interventions in order to increase students' and their parents' awareness regarding the harmfulness of WP, and to establish legal measures to restrict adolescents

Wpływ głęboszowania na zmiany właściwości fizyko-wodnych gleby płowej

Directory of Open Access Journals (Sweden)

Andrzej Bogdał

2014-12-01

Full Text Available Badania wpływu głęboszowania na właściwości fizyko-wodne zbitych gleb uprawnych wykonano na gruntach ornych w miejscowości Wojnowice, położonej na terenie powiatu raciborskiego w województwie śląskim. Podczas prac terenowych wykonano i opisano po jednej odkrywce glebowej na polu głęboszowanym i niegłęboszowanym. Z każdego poziomu genetycznego obu profili glebowych pobrano próby gleby o strukturze nienaruszonej i naruszonej. Przy obu odkrywkach w warstwie ornej i podornej pomierzono przepuszczalność gleby. W laboratorium oznaczono skład granulometryczny, wilgotność, zawartość próchnicy i charakterystyczne gęstości gleby oraz wyliczono porowatość ogólną. Analiza wyników badań wykazała, że głębokie spulchnianie gleb płowych powoduje zmniejszenie ich gęstości objętościowej oraz zwiększenie infiltracji i porowatości ogólnej. Stwierdzono również poprawę stosunków powietrzno-wodnych w profilu głęboszowanym – zwiększyła się tam zawartość powietrza glebowego, a zmniejszyło uwilgotnienie. Badania wykazały, że nawet po 20 miesiącach od wykonania zabiegów agromelioracyjnych ich wpływ na wykorzystanie potencjalnych zdolności retencyjnych gleby jest zauważalny, co w konsekwencji może prowadzić do łagodzenia skutków zjawisk ekstremalnych –susz i powodzi.

Motywacja i wpływ uprawiania jogi na stan zdrowia – badanie własne = Motivation and influence practicing yoga on health - own study

Directory of Open Access Journals (Sweden)

Katarzyna Gwis

2016-09-01

  Motywacja i wpływ uprawiania jogi na stan zdrowia – badanie własne Motivation and influence practicing yoga on health - own study   Katarzyna Gwis1, Dominik Olejniczak2, Joanna Skonieczna2   1 Absolwentka kierunku Zdrowie Publiczne Wydział Nauki o Zdrowiu Warszawski Uniwersytet Medyczny   2 Warszawski Uniwersytet Medyczny Zakład Zdrowia Publicznego ul. Banacha 1a, 02-097 Warszawa   Słowa kluczowe: joga, zdrowie, zachowania zdrowotne Key words: yoga, health, health behavior   Streszczenie Wprowadzenie i cel pracy: Joga to jedna z form aktywności ruchowej. Joga oddziałuje na ciało i na umysł, dzięki czemu w prosty sposób pomaga zachować zdrowie. Celem badania była ocena wpływu uczestnictwa w zajęciach jogi na zdrowie. Materiał i metoda: Grupę badaną stanowiło 50 osób uczęszczających na zajęcia jogi. Udział w ankiecie był dobrowolny i poufny. Zastosowano autorski kwestionariusz. Wyniki: W grupie badanych, aż 48 osób (96% stwierdziło, że ćwiczenia jogi pozytywnie wpływają na kształtowanie nawyków ruchowych. Ponad połowa badanych - 26 osób (52% stwierdziła, że uczęszczanie na zajęcia jogi sprawiło, że wzrosło ich zainteresowanie zdrowym odżywianiem. Ponad połowa badanych – 26 osób (52% jako główną korzyść płynącą z ćwiczeń jogi wskazała wzrost sprawności fizycznej. Ponad połowa osób ankietowanych – 28 osób (56% zaobserwowała, że od kiedy ćwiczy jogę stany chorobowe występują rzadziej.  Wnioski: Analizując wyniki przeprowadzonego badania własnego oraz dyskusję można stwierdzić, iż w związku z udokumentowanym pozytywnym wpływem jogi na stan zdrowia warto jest propagować tą formę rekreacji ruchowej we wszystkich grupach wiekowych, poczynając od dzieci, a  kończąc na osobach w  podeszłym wieku.       Abstract   Introduction: Yoga is a form of physical activity. Yoga affects the body and the mind, making it an easy way to help maintain good health. The aim of this

Biofuels cost developments in the EU27+ until 2030. Full-chain cost assessment and implications of policy options. REFUEL WP4 final report

International Nuclear Information System (INIS)

Londo, H.M.; Lensink, S.M.; Deurwaarder, E.P.; Wakker, A.; De Wit, M.; Junginger, M.; Koenighofer, K; Jungmeier, G.

2008-02-01

With the rapid developments in the biofuels domain comes the need for biofuel policies that spur their introduction in a responsible way. The REFUEL project, supported by the EU Intelligent Energy Europe programme, develops a road map for biofuels in the EU27+ up to 2030. This WP4 report shows the results of a full-chain analysis of the costs of different biofuels. Effects of different levels of biofuel target setting were analysed, and also the impact of different additional policy measures, such as the introduction of a CO2 pricing mechanism and specific subsidies

Indeterminacy and stability in a modified Romer model: a general case

Czech Academy of Sciences Publication Activity Database

Slobodyan, Sergey

-, č. 284 (2006), s. 1-16 ISSN 1211-3298 Institutional research plan: CEZ:AV0Z70850503 Keywords : indeterminacy * stability * Hopf bifurcation Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp284.pdf

Przemiany siedlisk wsi pod wpływem urbanizacji we wschodnim paśmie aglomeracji łódzkiej (koluszkowsko-brzezińskim)

OpenAIRE

Wójcik, Marcin

2006-01-01

W pierwszej części artykułu przedstawiono rozwój sieci osadniczej wschodniego pasma aglomeracji łódzkiej jak o układu linii, posługując się metodą grafów. W dalszej części omówiono przemiany funkcjonalno-przestrzenne wybranych siedlisk wsi pod wpływem procesu urbanizacji. Wykazano zależność między zmianą funkcji siedliska, z rolniczej na pozarolniczą, a malejącą intensywnością zabudowy działek. Prawidłowość ta upoważniła autora do budowy modelu przekształceń funkcjonalno-przest...

Laminar and Turbulent Flow Calculations for the Hifire-5B Flight Test

Science.gov (United States)

2017-11-01

STATES AIR FORCE AFRL-RQ-WP-TP-2017-0172 LAMINAR AND TURBULENT FLOW CALCULATIONS FOR THE HIFIRE-5B FLIGHT TEST Roger L. Kimmel Hypersonic Sciences...stationary instabilities of the three-dimensional flow as the grid becomes finer. It may not be possible to obtain a strictly laminar basic state on a very...fine grid. A basic state solution was desired for the laminar flow calculations, and the oscillations observed in Fig. 3 were judged to be undesirable

Badania wartości ekonomicznej usług biblioteczno-informacyjnych i ich wpływu na otoczenie

Directory of Open Access Journals (Sweden)

Ewa Głowacka

2011-01-01

Full Text Available Biblioteki pełnią różnorodne funkcje we współczesnym otoczeniu społecznym. Uczestniczą w tworzeniu kapitału intelektualnego i społecznego, wpływają na wzrost korzyści ekonomicznych użytkowników i całego społeczeństwa. W artykule omówiono główne podejścia i metody badawcze w zakresie oceny korzyści ekonomicznych płynących z funkcjonowania bibliotek. Skupiono się na metodzie analizy kosztów w stosunku do korzyści (ang. CBA – cost-benefit analysis, metodzie analizy warunkowej (ang. CVM – contigent valuation method, określaniu wartości dodanej dla użytkownika (ang. consumer surplus method i metodologii oceny stopy wzrostu z inwestycji (ang. ROI – return of investment. Przeanalizowano również różne projekty badań prowadzone na świecie w tym zakresie.

Wpływ aktywności fizycznej na sprawność funkcji poznawczych osób w podeszłym wieku i na przebieg choroby Alzheimera

Directory of Open Access Journals (Sweden)

Tomasz Gabryelewicz

2013-04-01

Full Text Available W miarę starzenia się społeczeństwa coraz więcej osób doświadcza związanego z wiekiem osłabienia pamięci i zaburzeń innych funkcji poznawczych. Dla części tych osób zaburzenia te mogą być zwiastunem otępienia. Wiadomo, że jego najczęstszą przyczyną jest choroba Alzheimera (Alzheimer’s disease, AD. Stosowane obecnie metody farmakologicznego zapobiegania i leczenia AD są mało skuteczne. Powoduje to, że podejmowane są próby terapii mających na celu spowolnienie przebiegu AD i opóźnienie początku objawowej fazy klinicznej choroby. Może to znacząco wpływać na zmniejszenie zapadalności na AD. Wyniki biologicznych, epidemiologicznych i randomizowanych badań kontrolowanych wskazują na korzystny wpływ regularnej aktywności fizycznej na zapobieganie występowaniu zaburzeń poznawczych u osób w podeszłym wieku i spowolnienie przebiegu AD. Okazuje się, że aktywność fizyczna, szczególnie w połączeniu z aktywnością umysłową i intensywną aktywnością społeczną, może być użyteczną, a przy tym tańszą i bezpieczniejszą metodą zapobiegania AD niż profilaktyka farmakologiczna. Dalszych badań wymaga określenie precyzyjnych zaleceń dotyczących rodzaju, czasu trwania i intensywności tych form terapii. Istnieje jednak szansa, że w bliskiej przyszłości będziemy mogli stosować potwierdzone zasady zapobiegania AD dotyczące zachowań dietetycznych, aktywności społecznej, umysłowej i fizycznej. Wymienione wyżej rodzaje interwencji niefarmakologicznych wpływają również pozytywnie na codzienne funkcjonowanie i ogólną jakość życia osób w podeszłym wieku i pacjentów z AD.

DSSNET, a network of users and developers of decision support systems for emergency response in Europe

International Nuclear Information System (INIS)

Salfeld, H.C.; Raskob, W.

2002-01-01

Following the Chernobyl accident, computerised systems for off-site management and response in case of a nuclear accident were developed and installed in many European countries. Some of the systems are in use in only one country, whereas other systems have found broader application in Europe. Examples of these systems are IMIS (D), ARGOS (DK), running in Denmark, Lithuania and Poland and RODOS, a real-time on-line decision support system for nuclear emergency management in Europe, which is now installed for operational or test-operational use in many European countries. During the development and installation phases of these decision support systems the necessity emerged, that there is a need for an intensive feedback between developers and users. Therefore, under the 5. Framework Programme of the European Commission a network has been installed to intensify the communication and increase the understanding between the operational community and the many and diverse disciplines involved in RD for improvement, extension and integration of operational decision support systems for nuclear emergency management, called DSSNET. This poster demonstrates how the network is organised, namely with different work groups, exercises and meetings. Each working group addresses one of seven work packages: - Preparation and conduct of exercises (WP1), - User interfaces, results and interaction with decision makers (WP2), - Exchange of data information relevant for decision-making (WP3), System functions, networks and processing of on-line data (WP4), European database (WP5), Coordination of the network (WP6), Hydrological modelling (WP7). Main focus is given to WP4, in which information of on-line monitoring from more than 10 European counties is collected. Information was collated with the help of questionnaires which are send out on a regular basis. The evaluation of the various questionnaires summarises the different systems in use for stack monitoring, retrieving on

Improving low fat meatball characteristics by adding whey powder.

Science.gov (United States)

Serdaroğlu, Meltem

2006-01-01

In this study whey powder (WP) at levels of 0%, 2% and 4% was added to beef meatballs formulated with 5%, 10% and 20% fat levels. Raw and cooked meatballs were analyzed for protein, fat, moisture, ash and pH. Meatballs were evaluated for cooking characteristics, juiciness, colour parameters (L*,a*,b*) and sensory properties. Addition of WP did not affect fat and protein contents of meatballs. Addition of 2% or 4% WP significantly increased cooking yield regardless of the fat level. Both fat level and WP level significantly affected fat retention values of meatballs. Incorporating WP had no effect on meatball juiciness. Addition of WP increased fat and moisture retention of meatballs. Twenty percent fat resulted in higher L* and lower a* values. Adding WP resulted in higher L* values but WP had no effect on a* and b* values. WP had no detrimental effect on sensory properties.

Fabrication of Zr2WP2O12/ZrV0.6P1.4O7 composite with a nearly zero-thermal-expansion property.

Science.gov (United States)

Yanase, Ikuo; Sakai, Hiroshi; Kobayashi, Hidehiko

2017-11-15

Sintered bodies of Zr 2 WP 2 O 12 (ZWP) and ZrV 0.6 P 1.4 O 7 (ZVP) were fabricated, and their linear thermal expansion coefficients (TEC) were found to be -2.92 × 10 -6 and 3.27 × 10 -6  °C -1 , respectively, in the range 25-500 °C. In an attempt to fabricate composites with a zero-thermal-expansion property, sintered ZWP/ZVP composites with ZVP/ZWP volume ratios of 0.5/0.5, 0.53/0.47, 0.55/0.45, and 0.6/0.4 were fabricated. Scanning electron microscopy revealed that sintering of ZVP/ZWP composites progressed well compared with that of ZWP. A porous ZVP/ZWP composite with a relative density of ca. 83% was fabricated at a ZVP/ZWP volume ratio of 0.53/0.47. X-ray diffractometry and energy dispersive X-ray spectrometry clarified that the ZVP/ZWP composite mainly consisted of ZWP and ZVP grains. Thermomechanical analysis confirmed that the ZVP/ZWP composite exhibited very low thermal expansion with a slight hysteresis with a TEC of -0.29 × 10 -7  °C -1 in the range 25-500 °C.

On the potential change in wind power over the US due to increases of atmospheric greenhouse gases

International Nuclear Information System (INIS)

Segal, Moti; Pan, Zaitao; Arritt, Raymond W.; Takle, Eugene S.

2001-01-01

Wind power (WP) is a likely source of renewable energy to reduce fossil CO 2 atmospheric emissions. However, WP availability might be affected by climate changes induced by such emissions. In this study a refined regional climate model, appropriate for resolving near-surface flows, was used to generate WP climatologies for the US consistent with present and mid-21st century enhanced atmospheric CO 2 level. In both cases the regional climate simulation was forced by lateral boundary conditions based on simulations of the Hadley Centre general circulation model. Simulated present WP showed reasonable general agreement with patterns observed in most locations. In most of the US the enhanced CO 2 simulation showed a trend of decreased daily average WP availability in the range of 0-30%. However, in limited areas in the southern and northwestern US, an increase in WP, peaking at 30%, was simulated. Under the enhanced CO 2 climate scenario, the present relatively high WP availability in northern Texas and western Oklahoma, as well as in the northwest US, are almost unaffected. A decline in WP is simulated in the north-central US and the western mountainous region. (Author)

DETECTION OF LASALOCID RESIDUES IN THE TISSUES OF BROILER CHICKENS BY A NEW SCREENING TEST TOTAL ANTIBIOTICS

Directory of Open Access Journals (Sweden)

Martin Levkut, ml.

2011-04-01

Full Text Available The aim of the present study was to evaluate the microbial growth inhibition test Total antibiotics for the screening of lasalocid residues in the tissues of broiler chickens after its oral administration in medicated feed. The residues were investigated throughout the 5-day withdrawal period /WP/ and also on day 6 representing the first day following the WP. All broiler chicken tissues were positive for lasalocid. The breast muscle was positive (the presence of residues at/above the detection limit /LOD/ of method up to day 1 of the WP, the thigh muscle, gizzard, heart, skin and fat up to day 3 of the WP and the liver and kidneys up to day 4 of the WP. When evaluating the dubious results (the presence of residues just below the LOD of method, the breast muscle was suspect positive up to day 3 of the WP and the gizzard, skin and fat up to day 4 of the WP. No positive or dubious results were detected on day 5 of the WP. The LOD of Bacillus stearothermophilus var. calidolactis for maduramycin was 500 µg.l-1.doi:10.5219/140

Information and communication technologies in a multi-sector endogenous growth model

Czech Academy of Sciences Publication Activity Database

Vourvachaki, Evangelia

-, č. 386 (2009), s. 1-56 ISSN 1211-3298 Institutional research plan: CEZ:MSM0021620846 Keywords : multi-sector economy * endogenous growth * information and communication technologies Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp386.pdf

A European consensus report on blood cell identification: terminology utilized and morphological diagnosis concordance among 28 experts from 17 countries within the European LeukemiaNet network WP10, on behalf of the ELN Morphology Faculty

DEFF Research Database (Denmark)

Zini, Gina; Bain, Barbara; Bettelheim, Peter

2010-01-01

This paper describes the methodology used to develop a consensual glossary for haematopoietic cells within Diagnostics-WP10 of European-LeukemiaNet EU-project. This highly interactive work was made possible through the use of the net, requiring only a single two-day meeting of actual confrontatio...

A European consensus report on blood cell identification: terminology utilized and morphological diagnosis concordance among 28 experts from 17 countries within the European LeukemiaNet network WP10, on behalf of the ELN Morphology Faculty

DEFF Research Database (Denmark)

Zini, Gina; Bain, Barbara; Bettelheim, Peter

2010-01-01

This paper describes the methodology used to develop a consensual glossary for haematopoietic cells within Diagnostics-WP10 of European-LeukemiaNet EU-project. This highly interactive work was made possible through the use of the net, requiring only a single two-day meeting of actual confrontation...

ANALYSIS/MODEL COVER SHEET, MULTISCALE THERMOHYDROLOGIC MODEL

International Nuclear Information System (INIS)

Buscheck, T.A.

2001-01-01

The purpose of the Multiscale Thermohydrologic Model (MSTHM) is to describe the thermohydrologic evolution of the near-field environment (NFE) and engineered barrier system (EBS) throughout the potential high-level nuclear waste repository at Yucca Mountain for a particular engineering design (CRWMS M andO 2000c). The process-level model will provide thermohydrologic (TH) information and data (such as in-drift temperature, relative humidity, liquid saturation, etc.) for use in other technical products. This data is provided throughout the entire repository area as a function of time. The MSTHM couples the Smeared-heat-source Drift-scale Thermal-conduction (SDT), Line-average-heat-source Drift-scale Thermohydrologic (LDTH), Discrete-heat-source Drift-scale Thermal-conduction (DDT), and Smeared-heat-source Mountain-scale Thermal-conduction (SMT) submodels such that the flow of water and water vapor through partially-saturated fractured rock is considered. The MSTHM accounts for 3-D drift-scale and mountain-scale heat flow, repository-scale variability of stratigraphy and infiltration flux, and waste package (WP)-to-WP variability in heat output from WPs. All submodels use the nonisothermal unsaturated-saturated flow and transport (NUFT) simulation code. The MSTHM is implemented in several data-processing steps. The four major steps are: (1) submodel input-file preparation, (2) execution of the four submodel families with the use of the NUFT code, (3) execution of the multiscale thermohydrologic abstraction code (MSTHAC), and (4) binning and post-processing (i.e., graphics preparation) of the output from MSTHAC. Section 6 describes the MSTHM in detail. The objectives of this Analyses and Model Report (AMR) are to investigate near field (NF) and EBS thermohydrologic environments throughout the repository area at various evolution periods, and to provide TH data that may be used in other process model reports

Oriented stochastic data envelopment models: ranking comparison to stochastic frontier approach

Czech Academy of Sciences Publication Activity Database

Brázdik, František

-, č. 271 (2005), s. 1-46 ISSN 1211-3298 Institutional research plan: CEZ:AV0Z70850503 Keywords : stochastic data envelopment analysis * linear programming * rice farm Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp271.pdf

Musik for folket! http://www.aabenraa-lokal-tv.dk/wp/2010/11/22/22-november-%E2%80%93-29-november-musik-for-folket/

DEFF Research Database (Denmark)

Grund, Cynthia M.; Araghipour, Janus Høgfeldt; Bonne, Jane

2010-01-01

The TV-documentary "Musik for folket!" (in Danish) was filmed during the November 11 lunchtime concert and through a series of interviews with Carsten Sjødahl, Jane Bonne, Leif Jensen, Søren R. Frimodt-Møller, Janus Høgfeldt Araghipour and Cynthia M. Grund, it recounts the story behind the luncht...... the lunchtime concert series at SDU. The program aired November 22-29, 2010 on ALTV and is permanently available from November 22, 2010 onwards at http://www.aabenraa-lokal-tv.dk/wp/2010/11/22/22-november-%E2%80%93-29-november-musik-for-folket/...

Two new pupal sexing strains in the Mediterranean fruit fly, Ceratitis capitata (Wied.)

International Nuclear Information System (INIS)

Zapater, M.

1990-01-01

A genetic sexing system in the Mediterranean fruit fly (medfly), Ceratitis capitata (Wiedemann), is urgently required in order to reduce the costs of mass rearing and to prevent punctures in fruit made by the ovipositors of sterilized females. Two genetic sexing strains, T(Y,5)122; T:Y(wp), white pupae, and T(Y,3,5)11; T:Y(dp + wp + ), were isolated and studied in connection with their possible use in a mass rearing programme. Both strains have males emerging from wild type brown pupae and females emerging from mutant pupae; they are stable up to generation 22. The strain T(Y,5)122 has a translocation linking the Y chromosome with the autosome carrying the wp locus. The strain T(Y,3,5)11 has a translocation linking the Y chromosome and the two chromosomes carrying the wp and the dp loci. The egg fertility of the strain T(Y,5)122 was 52% and that of T(Y,3,5)11 was 48%. Larval survival of the latter line was 79%. The technical advantages of these strains was discussed in this paper. The strain T(Y,4)116; T:Y(ap + ), apricot eye, is characterized by wild type males and apricot eye females, as well as apricot eye sterile males. A model explaining the appearance of these ap males is proposed. Isolation and preliminary fertility studies of six sex linked multiple translocations are presented. Each of these strains has three translocations involving the chromosomes Y, 3, 4 and 5. (author). 13 refs, 4 tabs

Implementation of Localized Corrosion in the Performance Assessment Model for Yucca Mountain

International Nuclear Information System (INIS)

Vivek Jain, S.; David Sevougian; Patrick D. Mattie; Kevin G. Mon; Robert J. Mackinnon

2006-01-01

A total system performance assessment (TSPA) model has been developed to analyze the ability of the natural and engineered barriers of the Yucca Mountain repository to isolate nuclear waste over the 10,000-year period following repository closure. The principal features of the engineered barrier system (EBS) are emplacement tunnels (or ''drifts'') containing a two-layer waste package (WP) for waste containment and a titanium drip shield to protect the waste package from seeping water and falling rock, The 20-mm-thick outer shell of the WP is composed of Alloy 22, a highly corrosion-resistant nickel-based alloy. The barrier function of the EBS is to isolate the waste from migrating water. The water and its associated chemical conditions eventually lead to degradation of the waste packages and mobilization of the radionuclides within the packages. There are five possible waste package degradation modes of the Alloy 22: general corrosion, microbially influenced corrosion, stress corrosion cracking, early failure due to manufacturing defects, and localized corrosion. This paper specifically examines the incorporation of the Alloy-22 localized corrosion model into the Yucca Mountain TSPA model, particularly the abstraction and modeling methodology, as well as issues dealing with scaling, spatial variability, uncertainty, and coupling to other sub-models that are part of the total system model

Genetic toxicology of metal compounds. I. Induction of lambda prophage in E coli WP2/sub s/(lambda)

Energy Technology Data Exchange (ETDEWEB)

Rossman, T.G.; Molina, M.; Meyer, L.W.

1984-01-01

A number of metal compounds have been shown to be human carcinogens. Others, while not proven human carcinogens, are able to cause tumors in laboratory animals. Short-term bacterial assays for genotoxic effects have not been successful in predicting the carcinogenicity of metal compounds. The authors report here the ability of some metal compounds to cause the induction of lambda prophage in E coli WP2/sub s/(lambda). By far the strongest inducing ability was observed with K/sub 2/CrO/sub 4/, followed by Pb(NO/sub 3/)/sub 2/ > Ni(OOCCH/sub 3/)/sub 2/ > CrCl/sub 2/ > NaWO/sub 4/ > Na/sub 2/MoO/sub 4/ > KMnO/sub 4/. With the exception of chromate, long-term exposures in a narrow, subtoxic dose range were required in order to demonstrate phage induction. A new microtiter assay for lambda prophage induction, which incorporates these features, is described. This system also was able to detect very small amounts of organic carcinogens.

Ultraviolet sensitivity of Vibrio parahaemolyticus, a causative bacterium of food poisoning

International Nuclear Information System (INIS)

Nozu, K.; Ohnishi, T.

1977-01-01

A pathogenic strain of Vibrio parahaemolyticus, strain WP1, is about 5 times more sensitive to killing by ultraviolet light than is the non-pathogenic strain WP28, but WP1 cells have an efficient liquid-holding recovery. The cellular DNA of both strains is fragmented shortly after ultraviolet irradiation, but the fragment DNA is converted in a short time to the initial large molecular size in WP28 cells. In WP1 cells, however, the DNA molecules were degraded rapidly without any apparent rejoining in a growth condition. Post-irradiation liquid-holding made the DNA of WP1 cells stable, as supported by the recovery of DNA synthetic activity in these cells. (author)

Operation of a T63 Turbine Engine Using F24 Contaminated Skydrol 5 Hydraulic Fluid

Science.gov (United States)

2016-09-01

hydraulic fluids were originally developed by the Douglas Aircraft Company during the 1940s to reduce fire risk from leaking high pressure mineral oil...thermal load demands in modern hydraulic systems and reduced density to lower weight impact on the aircraft. Eastman Chemical is the current producer of...AFRL-RQ-WP-TM-2016-0155 OPERATION OF A T63 TURBINE ENGINE USING F24 CONTAMINATED SKYDROL 5 HYDRAULIC FLUID Matthew J. Wagner (AFRL/RQTM) James

D1.3 -- Short Report on the First Draft Multi-link Channel Model

DEFF Research Database (Denmark)

Pedersen, Troels; Raulefs, Ronald; Steinboeck, Gerhard

This deliverable is a preliminary report on the activities towards multi-link channel models. It summarizes the activities and achievements of investigations of WP1 Task 1.2 in the first year of the project. In this deliverable work focuses on the characterization of the crosscorrelation of multi...

Temporal Variations of Water Productivity in Irrigated Corn: An Analysis of Factors Influencing Yield and Water Use across Central Nebraska.

Directory of Open Access Journals (Sweden)

Tony Carr

Full Text Available Water Productivity (WP of a crop defines the relationship between the economic or physical yield of the crop and its water use. With this concept it is possible to identify disproportionate water use or water-limited yield gaps and thereby support improvements in agricultural water management. However, too often important qualitative and quantitative environmental factors are not part of a WP analysis and therefore neglect the aspect of maintaining a sustainable agricultural system. In this study, we examine both the physical and economic WP in perspective with temporally changing environmental conditions. The physical WP analysis was performed by comparing simulated maximum attainable corn yields per unit of water using the crop model Hybrid-Maize with observed data from 2005 through 2013 from 108 farm plots in the Central Platte and the Tri Basin Natural Resource Districts of Nebraska. In order to expand the WP analysis on external factors influencing yields, a second model, Maize-N, was used to estimate optimal nitrogen (N-fertilizer rate for specific fields in the study area. Finally, a vadose zone flow and transport model, HYDRUS-1D for simulating vertical nutrient transport in the soil, was used to estimate locations of nitrogen pulses in the soil profile. The comparison of simulated and observed data revealed that WP was not on an optimal level, mainly due to large amounts of irrigation used in the study area. The further analysis illustrated year-to-year variations of WP during the nine consecutive years, as well as the need to improve fertilizer management to favor WP and environmental quality. In addition, we addressed the negative influence of groundwater depletion on the economic WP through increasing pumping costs. In summary, this study demonstrated that involving temporal variations of WP as well as associated environmental and economic issues can represent a bigger picture of WP that can help to create incentives to sustainably

Selected working papers[Nuclear data activities

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-08-01

The following working papers are included in this report: WP 2002-2, Dictionary Restructuring; WP-2002-4, Page numbers for REFERENCE (CP-C/285); WP-2002-5, Correlation quantities; WP 2002-8, Proposed data heading EN-CM-TOT (memo CP-A/121); WP 2002-9, Proposed high energy quantities (memo CP-A/123); WP 2002-11, Use of nuclide codes in SF 7 (memo CP-C/302); WP 2002-12, Redundant coding, new data heading PART-OUT; WP 2002-16, Zeros in error field (CP-C/306); WP 2002-17, Multiple appearance of the first Reference in EXFOR; WP 2002-18 + Add., EXFOR master file comparisons; WP 2002-19, Measures of Security at the NDS Open Area for EXFOR; WP 2002-20, New and revised entries received at NDS; WP 2002-21, EXFOR transmissions (NNDC); WP 2002-22, CINDA statistics (NNDC); WP 2002-24, CINDA batch exchange information (NDS); WP 2002-25, Journal coverage for CINDA; WP 2002-26, EXFOR-relational as multi-platform database (V. Zerkin); WP 2002-27, Completeness of EXFOR compil. as indexed by CINDA; WP 2002-28, Future NRDC Cooperation on CINDA: see Appendix 9; WP 2002-31, Development of Web Editor for Charged-Particle Nuclear Reaction Data (N. Otuka, H. Noto, A. Ohnishi, K. Kato). The following other papers, or the memos of which they consist, are available from the IAEA Nuclear Data Section: WP 2002-1, Actions of previous meetings (2002, 2001) see INDC(NDS)-427, pp.20-26, and INDC(NDS)-418, pp.26-31; WP 2002-3, Units for particle and product yields: see memos CP-C/294, 286; WP 2002-6, 4-momentum transfer and mom.distr.data: see memos CP-C/295 and CP-D/330; WP 2002-7, Several 'straightforward' new quantities: see memos CP-/C-291, 298 and CP-A/118; WP 2002-10, Quantities proposed by JCPRG (see memos DP-D/337, CP-E/004, 003); WP 2002-13, Clarifications on Product Yields and Thick Target Yields (see memo CP-D/332); WP 2002-14, Clarifications on Polarization quantities (see memo CP-D/320); WP 2002-15, New Legendre polynomial modifier proposed (see CP-C/305); WP 2002-23, see memo 4C-4

Selected working papers

International Nuclear Information System (INIS)

2002-01-01

The following working papers are included in this report: WP 2002-2, Dictionary Restructuring; WP-2002-4, Page numbers for REFERENCE (CP-C/285); WP-2002-5, Correlation quantities; WP 2002-8, Proposed data heading EN-CM-TOT (memo CP-A/121); WP 2002-9, Proposed high energy quantities (memo CP-A/123); WP 2002-11, Use of nuclide codes in SF 7 (memo CP-C/302); WP 2002-12, Redundant coding, new data heading PART-OUT; WP 2002-16, Zeros in error field (CP-C/306); WP 2002-17, Multiple appearance of the first Reference in EXFOR; WP 2002-18 + Add., EXFOR master file comparisons; WP 2002-19, Measures of Security at the NDS Open Area for EXFOR; WP 2002-20, New and revised entries received at NDS; WP 2002-21, EXFOR transmissions (NNDC); WP 2002-22, CINDA statistics (NNDC); WP 2002-24, CINDA batch exchange information (NDS); WP 2002-25, Journal coverage for CINDA; WP 2002-26, EXFOR-relational as multi-platform database (V. Zerkin); WP 2002-27, Completeness of EXFOR compil. as indexed by CINDA; WP 2002-28, Future NRDC Cooperation on CINDA: see Appendix 9; WP 2002-31, Development of Web Editor for Charged-Particle Nuclear Reaction Data (N. Otuka, H. Noto, A. Ohnishi, K. Kato). The following other papers, or the memos of which they consist, are available from the IAEA Nuclear Data Section: WP 2002-1, Actions of previous meetings (2002, 2001) see INDC(NDS)-427, pp.20-26, and INDC(NDS)-418, pp.26-31; WP 2002-3, Units for particle and product yields: see memos CP-C/294, 286; WP 2002-6, 4-momentum transfer and mom.distr.data: see memos CP-C/295 and CP-D/330; WP 2002-7, Several 'straightforward' new quantities: see memos CP-/C-291, 298 and CP-A/118; WP 2002-10, Quantities proposed by JCPRG (see memos DP-D/337, CP-E/004, 003); WP 2002-13, Clarifications on Product Yields and Thick Target Yields (see memo CP-D/332); WP 2002-14, Clarifications on Polarization quantities (see memo CP-D/320); WP 2002-15, New Legendre polynomial modifier proposed (see CP-C/305); WP 2002-23, see memo 4C-4

Quantification of lung cancer risk after low radon exposure and low exposure rate: synthesis from epidemiological and experimental data

International Nuclear Information System (INIS)

Timarche, M.

2004-03-01

Radon is a radioactive gas produced during the decay of uranium 238 that is present in soil. It was classified as a human lung carcinogen in 1988, based on evidence both from animal studies and from human studies of miners with high levels of radon exposure. Radon is present everywhere; therefore the quantification of the risk associated with exposure to it is a key public health issue. The project aimed to analyse the risk associated with radon inhalation at low doses and at low rates of exposure. It involved researchers from three different fields: epidemiology, animal experiments and mechanistic modelling and provided a unique opportunity to study the influence of dose rate, mainly in the range of low daily exposures over long periods, by analysing in parallel results from both animal and epidemiological studies. The project comprised 6 work packages (W.P.). Firstly, the partners involved in epidemiology and animal experiments worked on the validation and the analysis of the data. Secondly, the data from W.P.1 and W.P.4 were transferred to the partners involved in W.P.5 for the application of mechanistic models. In the final step a synthesis of the results was prepared. (N.C)

Quantification of lung cancer risk after low radon exposure and low exposure rate: synthesis from epidemiological and experimental data

Energy Technology Data Exchange (ETDEWEB)

Timarche, M

2004-03-15

Radon is a radioactive gas produced during the decay of uranium 238 that is present in soil. It was classified as a human lung carcinogen in 1988, based on evidence both from animal studies and from human studies of miners with high levels of radon exposure. Radon is present everywhere; therefore the quantification of the risk associated with exposure to it is a key public health issue. The project aimed to analyse the risk associated with radon inhalation at low doses and at low rates of exposure. It involved researchers from three different fields: epidemiology, animal experiments and mechanistic modelling and provided a unique opportunity to study the influence of dose rate, mainly in the range of low daily exposures over long periods, by analysing in parallel results from both animal and epidemiological studies. The project comprised 6 work packages (W.P.). Firstly, the partners involved in epidemiology and animal experiments worked on the validation and the analysis of the data. Secondly, the data from W.P.1 and W.P.4 were transferred to the partners involved in W.P.5 for the application of mechanistic models. In the final step a synthesis of the results was prepared. (N.C)

Modelling climate change impact: A case of bambara groundnut (Vigna subterranea)

Science.gov (United States)

Mabhaudhi, Tafadzwanashe; Chibarabada, Tendai Polite; Chimonyo, Vimbayi Grace Petrova; Modi, Albert Thembinkosi

2018-06-01

Climate change projections for southern Africa indicate low and erratic rainfall as well as increasing frequency and intensity of rainfall extremes such as drought. The 2015/16 drought devastated large parts of southern Africa and highlighted the need for drought tolerant crops. Bambara groundnut is an African indigenous crop, commonly cultivated in southern Africa, with a higher potential for drought tolerance compared to other staple legumes. AquaCrop model was used to evaluate the impacts of climate change on yield, water use (ET) and water productivity (WP) of bambara groundnut using climate change data representative of the past (1961-1991), present (1995-2025), mid-century (2030-2060) and late century (2065-2095) obtained from five global circulation models (GCMs). The carbon dioxide (CO2) file selected was for the A2 scenario. The model was run at a sub-catchment level. Model simulations showed that yield and WP of bambara groundnut will increase over time. The mean values of yield at the different time scales across the GCMs showed that yield of bambara groundnut increased by ∼9% from the past to the present, will increase by ∼15% from the present to mid-century and will increase by 6% from mid-to late-century. The simulated results of ET showed seasonal ranges of 703-796 mm. Of this, 45% was lost to soil evaporation, suggesting the need for developing bambara groundnut varieties with faster establishment and high canopy cover. Model simulations showed an increase in WP by ∼13% from the past to present and ∼15% from the present to mid-century and ∼11% from mid-century to late century. While the results of these simulations are preliminary, they confirm the view that bambara groundnut is a potential future crop suitable for cultivation in marginal agricultural production areas. Future research should focus on crop improvement to improve current yield of bambara groundnut.

(The evolution of) post-secondary education: a computational model and experiments

Czech Academy of Sciences Publication Activity Database

Ortmann, Andreas; Slobodyan, Sergey

-, č. 355 (2008), s. 1-46 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:MSM0021620846 Keywords : post-secondary education * for-profit higher education providers * computational simulations Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp355.pdf

Wpływy polskie w jidysz według "History of the Yiddish Language" Maxa Weinreicha – przegląd i próby weryfikacji

Directory of Open Access Journals (Sweden)

Michał Gajek

2016-12-01

Full Text Available Polish influence on Yiddish as described in Max Weinreich’s History of the Yiddish Language – overview and attempts at verification The Article concentrates on the findings regarding Slavic influence on Yiddish, described in the newest English-language edition of Max Weinreich’s History of the Yiddish Language – a canonical title for modern Yiddish studies. Its first task is to acquaint Polish readers with M. Weinreich’s propositions and findings on the general character of Polish-Yiddish and Slavic-Yiddish language contact. This will also be taken as an opportunity to briefly review the research on this subject conducted by Polish scholars. Additionally, the article will elaborate (albeit not exhaustively on the attempts to question and verify M. Weinreich’s theories which may prove interesting from the point of view of Slavic studies. Its second, equally important task is to describe chosen examples of the results of Slavic influence, in which Polish played a significant role, as they present themselves in the lexicon, morphology, word formation and syntax of Yiddish.   Wpływy polskie w jidysz według History of the Yiddish Language Maxa Weinreicha – przegląd i próby weryfikacji Artykuł skupia się na ustaleniach na temat wpływów słowiańskich w jidysz, zawartych w najnowszym, anglojęzycznym wydaniu pracy Maxa Weinreicha pt. History of the Yiddish Language, mającej status pozycji kanonicznej współczesnej jidyszystyki. Jego pierwszym celem jest przybliżenie polskiemu czytelnikowi tez i ustaleń M. Weinreicha, dotyczących ogólnego charakteru językowych kontaktów polsko- i słowiańsko-żydowskich. Przy tej okazji uwzględnione zostaną informacje na temat badań, jakie do tej pory poczynili w tej materii językoznawcy polscy. Ponadto (niewyczerpująco poruszona zostanie kwestia prób weryfikacji i podważenia jego twierdzeń, interesująca z punktu widzenia slawistyki. Drugim, nie mniej wa

The 5C Model

DEFF Research Database (Denmark)

Friis, Silje Alberthe Kamille; Gelting, Anne Katrine Gøtzsche

2014-01-01

the approaches and reach a new level of conscious action when designing? Informed by theories of design thinking, knowledge production, and learning, we have developed a model, the 5C model, accompanied by 62 method cards. Examples of how the model has been applied in an educational setting are provided...

Performance analysis of a 11.2 kWp roof top grid-connected PV system in Eastern India

Directory of Open Access Journals (Sweden)

Renu Sharma

2017-11-01

Full Text Available Barren land and roof tops of buildings are being increasingly used worldwide to install solar panels for generating electricity. One such step has been taken by Siksha ‘O’Anusandhan University, Bhubaneswar (Latitude 20.24° N and Longitude 80.85° E by installing a 11.2 kWp grid connected solar power system during February, 2014. This PV system is tilted at an angle of 21° on the top floor of a 25 metre height building. This system was installed This paper presents the results of this grid connected photovoltaic system which was monitored between September 2014 to August 2015. The entire electricity generated by the system was fed into the state grid. The different parameters of the system studied include PV module efficiency, array yield, final yield, inverter efficiency and performance ratio of the system. The total energy generated during this period was found to be 14.960 MWh and the PV module efficiency, inverter efficiency and performance ratio were found to be 13.42%, 89.83% and 0.78 respectively.

Wpływ ilości spożywanych posiłków na wartość wskaźnika BMI = Influence amount of food meals for BMI

Directory of Open Access Journals (Sweden)

Dorota Nalepa

2016-03-01

Wyniki. Ilość dziennie spożywanych posiłków przez respondentów jest różna. Biorąc pod uwagę wiek respondentów, który traktowany jest jako przynależność do jednej z grup, uczących się lub pracujących zauważono że osoby uczące się najczęściej spożywają 4-5 posiłki zadeklarowało tak 40 badanych (58,8%, 3 posiłki spożywa 21 osób (30,9%. Od 6- do 8 posiłków dziennie spożywa  5 osób (7,4% w tej grupie  zaś 2osoby zjadają tylko 2 posiłki (2,9%. Wnioski. Na podstawie przeprowadzonych badań własnych sformułowano następujące wnioski: - na regularność spożywania posiłków nie mają wpływu wiek i płeć respondentów, istnieje natomiast  istotny związek między miejscem zamieszkania a ilością spożywanych posiłków. - na wartość wskaźnika BMI ma wpływ wiek  i płeć respondentów.  Osoby uczące się oraz    kobiety przywiązują uwagę do swojej wagi i BMI częściej osiąga granice wskazujące na     prawidłową masę ciała. - pierwsze śniadania są spożywane przez większość respondentów i nie mają na to wpływu            czynniki społeczno - demograficzne takie jak wiek, płeć i miejsce zamieszkania.   Słowa kluczowe: otyłość, wskaźnik BMI.       Summary The aim of the investigation is to assess the influence of the number of consumed meals upon the BMI. Methods and materials The research was conducted from January to February 2015 in a medical clinic in Lublin. 148 respondents were qualified for the research. The applied method was a diagnostic survey carried out among the respondents, which used: the birth certificate, interview as well as anthropometric measurements, covering the body height and body mass. In this way, the Body Mass Index was determined. Findings The number of meals, consumed daily, varied. Taking into account the age of the respondents, which served to divide the persons into different groups – studying or working ones, it was observed that students

(The evolution of) post-secondary education: a computational model and experiments

Czech Academy of Sciences Publication Activity Database

Ortmann, Andreas; Slobodyan, Sergey

-, č. 355 (2008), s. 1-46 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : post-secondary education * for-profit higher education providers * computational simulations Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp355.pdf

Natural stable isotopic compositions of mercury in aerosols and wet precipitations around a coal-fired power plant in Xiamen, southeast China

Science.gov (United States)

Huang, Shuyuan; Sun, Lumin; Zhou, Tingjin; Yuan, Dongxing; Du, Bing; Sun, Xiuwu

2018-01-01

In this study, samples of 18 wet precipitations (WPs) and 38 aerosols were collected around a coal-fired power plant (CFPP) located in Xiamen, southeast China, which was equipped with a seawater flue gas desulfurization system. Total particulate mercury (TPM) in aerosol samples, and total mercury (WP-TM), dissolved mercury (WP-DM) and particulate mercury (WP-PM) in WP samples were analyzed for the natural isotopic compositions of mercury. For the first time, both mass dependent fractionation (MDF) and mass independent fractionation of odd (odd-MIF) and even (even-MIF) isotopes of WP-DM and WP-PM were reported and discussed. Both WP-TM and TPM displayed negative MDF and slightly positive even-MIF. Negative odd-MIF was observed in TPM and WP-PM, whereas positive odd-MIF was observed in WP-TM and WP-DM. It was found that the mercury budget in WP-PM samples was mainly controlled by atmospheric particles. Potential sources of mercury in samples were identified via analysis of mercury isotopic signatures and meteorological data with the NOAA HYSPLIT model. The results showed that TPM and WP-PM in solid samples were homologous and the isotopic compositions of WP-TM depended on those of WP-DM. The ratios of Δ199Hg/Δ201Hg resulting from photochemical reactions and positive Δ200Hg values (from -0.06‰ to 0.27‰) in all samples indicated that the mercury coming from local emission of the CFPP together with long-distance transportation were the two main contributing sources.

Why do software manufacturers tolerate piracy in transition and less developed countries? A theoretical model

Czech Academy of Sciences Publication Activity Database

Kúnin, Michael

-, č. 231 (2004), s. 1-16 ISSN 1211-3298 Institutional research plan: CEZ:AV0Z7085904 Keywords : intellectual property rights * software * piracy Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp231.pdf

Social security reform in a dynastic life-cycle model with endogenous fertility

Czech Academy of Sciences Publication Activity Database

Boháček, Radim; Belush, Volha

-, č. 381 (2009), s. 1-51 ISSN 1211-3298 R&D Projects: GA AV ČR IAA700850702 Institutional research plan: CEZ:AV0Z70850503 Keywords : fertility * social security * fiscal policy * public expenditures * taxation Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp381.pdf

GEOS-5 Chemistry Transport Model User's Guide

Science.gov (United States)

Kouatchou, J.; Molod, A.; Nielsen, J. E.; Auer, B.; Putman, W.; Clune, T.

2015-01-01

The Goddard Earth Observing System version 5 (GEOS-5) General Circulation Model (GCM) makes use of the Earth System Modeling Framework (ESMF) to enable model configurations with many functions. One of the options of the GEOS-5 GCM is the GEOS-5 Chemistry Transport Model (GEOS-5 CTM), which is an offline simulation of chemistry and constituent transport driven by a specified meteorology and other model output fields. This document describes the basic components of the GEOS-5 CTM, and is a user's guide on to how to obtain and run simulations on the NCCS Discover platform. In addition, we provide information on how to change the model configuration input files to meet users' needs.

The effect of time in a multi-dimensional marriage market model

Czech Academy of Sciences Publication Activity Database

Vozár, Mário

-, č. 417 (2010), s. 1-32 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Grant - others:MŠk(CZ) SVV-2010-261801 Institutional research plan: CEZ:MSM0021620846 Keywords : aging * divorce * two-sided matching * Gale-Shapley marriage problem Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp417.pdf

The Impact of Propeller on Aerodynamics of Aircraft / Wpływ Śmigła Na Aerodynamikę Samolotu

Directory of Open Access Journals (Sweden)

Zalewski Wiesław

2015-09-01

Full Text Available W pracy przedstawiono analizę numeryczną wpływu pracujących śmigieł na aerodynamikę samolotu na przykładzie dwusilnikowego, bezzałogowego samolotu o napędzie elektrycznym. Analiza koncentrowała się głównie na symulacji wzajemnego oddziaływania układu skrzydło-śmigło samolotu. Badano i porównywano trzy konfiguracje: samolot bez śmigieł, samolot ze śmigłami pchającymi i samolot ze śmigłami ciągnącym. Dla każdej konfiguracji wyznaczono rozkłady współczynników aerodynamicznych wzdłuż rozpiętości skrzydła oraz ich globalne wartości dla całego samolotu. Obliczenia wykonano za pomocą programu Fluent z implementacja modelu śmigła opartą na Teorii Elementu Łopaty.

WAG 2 remedial investigation and site investigation site-specific work plan/health and safety checklist for the sediment transport modeling task

International Nuclear Information System (INIS)

Holt, V.L.; Baron, L.A.

1994-05-01

This site-specific Work Plan/Health and Safety Checklist (WP/HSC) is a supplement to the general health and safety plan (HASP) for Waste Area Grouping (WAG) 2 remedial investigation and site investigation (WAG 2 RI ampersand SI) activities [Health and Safety Plan for the Remedial Investigation and Site Investigation of Waste Area Grouping 2 at the Oak Ridge National Laboratory, Oak Ridge, Tennessee (ORNL/ER-169)] and provides specific details and requirements for the WAG 2 RI ampersand SI Sediment Transport Modeling Task. This WP/HSC identifies specific site operations, site hazards, and any recommendations by Oak Ridge National Laboratory (ORNL) health and safety organizations [i.e., Industrial Hygiene (IH), Health Physics (HP), and/or Industrial Safety] that would contribute to the safe completion of the WAG 2 RI ampersand SI. Together, the general HASP for the WAG 2 RI ampersand SI (ORNL/ER-169) and the completed site-specific WP/HSC meet the health and safety planning requirements specified by 29 CFR 1910.120 and the ORNL Hazardous Waste Operations and Emergency Response (HAZWOPER) Program Manual. In addition to the health and safety information provided in the general HASP for the WAG 2 RI ampersand SI, details concerning the site-specific task are elaborated in this site-specific WP/HSC, and both documents, as well as all pertinent procedures referenced therein, will be reviewed by all field personnel prior to beginning operations

A PV temperature prediction model for BIPV configurations, comparison with other models and experimental results

OpenAIRE

Kaplanis, Socrates; Kaplani, Eleni

2018-01-01

The temperatures of c-Si and pc-Si BIPV configurations of different manufacturers were studied when operating under various environmental conditions. The BIPV configurations formed part of the roof in a Zero Energy Building, (ZEB), hanged over windows with varying inclination on a seasonal basis and finally two identical 0.5kWp PV generators were mounted on a terrace in two modes: fixed inclination and sun-tracking. The PV and ambient temperatures, Tpv and Ta, respectively, the intensity of t...

Synthesis and structural characterization of a new aluminum oxycarbonitride, Al5(O, C, N)4

International Nuclear Information System (INIS)

Inuzuka, Haruya; Kaga, Motoaki; Urushihara, Daisuke; Nakano, Hiromi; Asaka, Toru; Fukuda, Koichiro

2010-01-01

A new aluminum oxycarbonitride, Al 5 (O x C y N 4-x-y ) (x∼1.4 and y∼2.1), has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and electron energy loss spectroscopy (EELS). The title compound was found to be hexagonal with space group P6 3 /mmc, Z=2, and unit-cell dimensions a=0.328455(6) nm, c=2.15998(3) nm and V=0.201805(6) nm 3 . The atom ratios O:C:N were determined by EELS. The final structural model, which is isomorphous with that of (Al 4.4 Si 0.6 )(O 1.0 C 3.0 ), showed the positional disordering of one of the three types of Al sites. The maximum-entropy method-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R wp =6.94% (S=1.22), R p =5.34%, R B =1.35% and R F =0.76%. The crystal was an inversion twin. Each twin-related individual was isostructural with Al 5 C 3 N (space group P6 3 mc, Z=2). - Graphical abstract: A new oxycarbonitride discovered in the Al-O-C-N system, Al 5 (O 1.4 C 2.1 N 0.5 ). The crystal is an inversion twin, and hence the structure is represented by a split-atom model. The three-dimensional electron density distributions are determined by the maximum-entropy methods-based pattern fitting, being consistent with the disordered structural model. Display Omitted

Wpływ miąższości reaktywnej warstwy drenażowej na odpływ fosforanów z zielonego dachu

Directory of Open Access Journals (Sweden)

Agnieszka Karczmarczyk

2017-12-01

Full Text Available Woda odciekająca z zielonego dachu może być zanieczyszczona zawiązkami fosforu. Źródłem tych zanieczyszczeń może być substrat dachowy. W pracy podjęto próbę określenia optymalnej proporcji miąższości warstwy drenażowej z materiału reaktywnego (MR do miąższości substratu (S stosowanego na zielonych dachach. Przeprowadzono doświadczenie kolumnowe, którego celem była ocena wpływu miąższości reaktywnej warstwy drenażowej wykonanej z Polonite® na wielkość redukcji fosforanów z odcieku. Potwierdzono, że substrat dachowy może być źródłem zanieczyszczenia fosforanami wody odprowadzanej z dachu zielonego. Wartość odprowadzonego ładunku wynosiła odpowiednio 0,091; 0,032 i 0,02 mg P-PO4 dla kolumn o proporcji S:MR=10:1, S:MR=10:2 i S:MR=10:5. Jako optymalne uznano zastosowanie warstwy substratu w stosunku do warstwy materiału reaktywnego w proporcji miąższości S:MR 10:2.

The iTREN-2030 reference scenario until 2030. Deliverable D4

Energy Technology Data Exchange (ETDEWEB)

Fiorello, Davide; De Stasio, Claudia; Koehler, Jonathan; Kraft, Markus; Netwon, Sean; Purwanto, Joko; Schade, Burkhard; Schade, Wolfgang; Szimba, Eckhard

2009-07-01

The basic objective of iTREN-2030 is to extend the forecasting and assessment capabilities of the TRANS-TOOLS transport model to the new policy issues arising from the technology, environment and energy fields. This is achieved by couplin the TRANS-TOOLS model with three other models, ASTRA, POLES and TREMOVE covering these new policy issues. The TRANS-TOOLS transport network model has been developed to constitute the reference tool for supporting transport policy in the EU and currently is being developed in several European projects. The scenario set-up to be developed in iTREN-2030 has been modified, so that the projects develops a reference scenario and an integrated scenario. For the reference scenario, the three other modelling tools are harmonised with TRANS-TOOLS and made consistent with each other. This results in a coherent scenario for Europe until 2030 for technology, transport, energy, environment and economic development. The integrated scenario will consider the changing framework conditions until 2030, inparticular the policy pressure coming from climate policy and the increasing scarcity of fossil fuels as well as the impact of the financial and economic crisis. Within the iTREN-2030 project, the overall objective of Work Package 4 (WP4) producing tis deliverable is to develop the reference scenario for the quantitative projections using the four modelling tools involved in the project. The main aims of WP4 are to (a) define a consistent framework for using the different tools in an integrated way; (b) calibrate models with exchanged input to a coherent joint reference; (c) implement external input from WP3 and running models for projections; (d) produce output procedures and templates to facilitate assessment in WP5.

Spatial Mapping of Agricultural Water Productivity Using the SWAT Model

Science.gov (United States)

Thokal, Rajesh Tulshiram; Gorantiwar, S. D.; Kothari, Mahesh; Bhakar, S. R.; Nandwana, B. P.

2015-03-01

The Sina river basin is facing both episodic and chronic water shortages due to intensive irrigation development. The main objective of this study was to characterize the hydrologic processes of the Sina river basin and assess crop water productivity using the distributed hydrologic model, SWAT. In the simulation year (1998-1999), the inflow to reservoir from upstream side was the major contributor to the reservoir accounting for 92 % of the total required water release for irrigation purpose (119.5 Mm3), while precipitation accounted for 4.1 Mm3. Annual release of water for irrigation was 119.5 Mm3 out of which 54 % water was diverted for irrigation purpose, 26 % was wasted as conveyance loss, average discharge at the command outlet was estimated as 4 % and annual average ground-water recharge coefficient was in the range of 13-17 %. Various scenarios involving water allocation rule were tested with the goal of increasing economic water productivity values in the Sina Irrigation Scheme. Out of those, only most benefited allocation rule is analyzed in this paper. Crop yield varied from 1.98 to 25.9 t/ha, with the majority of the area between 2.14 and 2.78 t/ha. Yield and WP declined significantly in loamy soils of the irrigation command. Crop productivity in the basin was found in the lower range when compared with potential and global values. The findings suggested that there was a potential to improve further. Spatial variations in yield and WP were found to be very high for the crops grown during rabi season, while those were low for the crops grown during kharif season. The crop yields and WP during kharif season were more in the lower reach of the irrigation commands, where loamy soil is more concentrated. Sorghum in both seasons was most profitable. Sorghum fetched net income fivefold that of sunflower, two and half fold of pearl millet and one and half fold of mung beans as far as crop during kharif season were concerned and it fetched fourfold that of

Recommendations report on applicability and transferability of practices into different settings and countries: good practices in the field of health promotion and chronic disease prevention across the life cycle (work package 5).

NARCIS (Netherlands)

Haarmann, A.; Gerstl, S.

2017-01-01

The objective of the work on health promotion and disease prevention (WP5) reflects the general objective of JA-CHRDOIS and seeks to identify, exchange, and promote the scaling-up and transfer of good practices on health promotion and chronic disease prevention, focusing primarily on cardiovascular

Predicting the water-drop energy required to breakdown dry soil aggregates

International Nuclear Information System (INIS)

Mbagwu, J.S.C.; Bazzoffi, P.

1995-04-01

The raindrop energy required to breakdown dry soil aggregates is an index of structural stability which has been found very useful in modelling soil erosion process and in evaluating the suitability of tillage implements for different soils. The aim of this research was to develop and validate a model for predicting the specific water-drop energy required to breakdown aggregates (D) as influenced by soil properties. Air-dry aggregates (2-4 mm in diameter), collected from 15 surface (0-20 cm) soils in north central Italy were used for this study. The actual and natural log-transformed D values were regressed on the soil properties. Clay content, wilting point moisture content (WP) and percent water-stable aggregates (WSA) > 2.0 mm were good predictors of D. Empirical models developed from either clay content or WP predicted D in 70% of the test soils whereas the model developed from WSA > 2.0 mm predicted D in 90% of the test soils. The correlation coefficients (r) between measured and predicted D were 0.961, 0.963 and 0.997 respectively, for models developed from clay, WP and WSA > 2.0 mm. The validity of these models need to be tested on other soils with a wider variation in properties than those used to developed the models. (author). 42 refs, 5 tabs

Analysis of measured and simulated performance data of a 3.2 kWp grid-connected PV system in Port Elizabeth, South Africa

International Nuclear Information System (INIS)

Okello, D.; Dyk, E.E. van; Vorster, F.J.

2015-01-01

Highlights: • Comparisons between actual measured and simulated performance of a grid-connected PV system. • Simulation using measured climate data sets gave good monthly energy yield comparisons to the measured. • The measured performance ratio of 84.3% shows vast solar energy potential in Eastern Cape region of South Africa. • Better annual specific yield is observed in this study compared to other studies internationally. - Abstract: This paper analyzes and compares the actual measured and simulated performance of a 3.2 kWp grid-connected photovoltaic system. The system is located at the Outdoor Research Facility (34.01°S, 25.67°E) at the Nelson Mandela Metropolitan University (NMMU), South Africa. The system consists of 14 poly crystalline silicon modules connected in two strings of 7 series-connected modules, each facing north at a fixed tilt of 34°. The data presented in this study were measured in the year 2013, where the system supplied a total of 5757 kW h to the local electric utility grid. The performance of the system was simulated using PVsyst software using measured and Meteonorm derived climate data sets (solar radiation, ambient temperature and wind speed). The comparison between measured and simulated energy yield are discussed. Although, both simulation results were similar, better comparison between measured and predicted monthly energy yield is observed with simulation performed using measured weather data at the site. The measured performance ratio in the present study is 84% which is slightly higher than values of 74%, 81.5%, 67.4%, 70% and 64.5% reported is Khatkar-Kalan (India), Dublin (Ireland), Crete (Greece), Karnataka (India) and Malaga (Spain), respectively

Planck constraints on holographic dark energy

International Nuclear Information System (INIS)

Li, Miao; Zhang, Zhenhui; Li, Xiao-Dong; Ma, Yin-Zhe; Zhang, Xin

2013-01-01

We perform a detailed investigation on the cosmological constraints on the holographic dark energy (HDE) model by using the Plank data. We find that HDE can provide a good fit to the Plank high-l (l ∼> 40) temperature power spectrum, while the discrepancy at l ≅ 20-40 found in the ΛCDM model remains unsolved in the HDE model. The Plank data alone can lead to strong and reliable constraint on the HDE parameter c. At the 68% confidence level (CL), we obtain c = 0.508 ± 0.207 with Plank+WP+lensing, favoring the present phantom behavior of HDE at the more than 2σ CL. By combining Plank+WP with the external astrophysical data sets, i.e. the BAO measurements from 6dFGS+SDSS DR7(R)+BOSS DR9, the direct Hubble constant measurement result (H 0 = 73.8 ± 2.4 kms −1 Mpc −1 ) from the HST, the SNLS3 supernovae data set, and Union2.1 supernovae data set, we get the 68% CL constraint results c = 0.484 ± 0.070, 0.474 ± 0.049, 0.594 ± 0.051, and 0.642 ± 0.066, respectively. The constraints can be improved by 2%-15% if we further add the Plank lensing data into the analysis. Compared with the WMAP-9 results, the Plank results reduce the error by 30%-60%, and prefer a phantom-like HDE at higher significant level. We also investigate the tension between different data sets. We find no evident tension when we combine Plank data with BAO and HST. Especially, we find that the strong correlation between Ω m h 3 and dark energy parameters is helpful in relieving the tension between the Plank and HST measurements. The residual value of χ 2 Plank+WP+HST −χ 2 Plank+WP is 7.8 in the ΛCDM model, and is reduced to 1.0 or 0.3 if we switch the dark energy to w model or the holographic model. When we introduce supernovae data sets into the analysis, some tension appears. We find that the SNLS3 data set is in tension with all other data sets; for example, for the Plank+WP, WMAP-9 and BAO+HST, the corresponding Δχ 2 is equal to 6.4, 3.5 and 4.1, respectively. As a comparison

Modeling a Distribution of Mortgage Credit Losses

Czech Academy of Sciences Publication Activity Database

Gapko, Petr; Šmíd, Martin

2010-01-01

Roč. 23, č. 23 (2010), s. 1-23 R&D Projects: GA ČR GA402/09/0965; GA ČR GD402/09/H045 Grant - others:Univerzita Karlova - GAUK(CZ) 46108 Institutional research plan: CEZ:AV0Z10750506 Keywords : Credit Risk * Mortgage * Delinquency Rate * Generalized Hyperbolic Distribution * Normal Distribution Subject RIV: AH - Economics http://library.utia.cas.cz/separaty/2010/E/gapko-modeling a distribution of mortgage credit losses-ies wp.pdf

In Vitro Studies and Preliminary Mathematical Model for Jet Fuel and Noise Induced Auditory Impairment

Science.gov (United States)

2015-06-01

of JP-8 and a Fischer- Tropsch synthetic jet fuel following subacute inhalation exposure in rats. Toxicol Sci 116(1): 239-248. Gallinat, J...AFRL-RH-WP-TR-2015-0084 IN VITRO STUDIES AND PRELIMINARY MATHEMATICAL MODEL FOR JET FUEL AND NOISE INDUCED AUDITORY IMPAIRMENT...April 2014 – September 2014 4. TITLE AND SUBTITLE In Vitro Studies and Preliminary Mathematical Model for Jet Fuel and Noise Induced Auditory

Simulation and performance analysis of 110 kWp grid-connected photovoltaic system for residential building in India: A comparative analysis of various PV technology

Directory of Open Access Journals (Sweden)

Akash Kumar Shukla

2016-11-01

Full Text Available System simulation is necessary to investigate the feasibility of Solar PV system at a given location. This study is done to evaluate the feasibility of grid connected rooftop solar photovoltaic system for a residential Hostel building at MANIT, Bhopal, India (Latitude: 23° 16′ N, Longitude: 77° 36′ E. The study focuses on the use of Solargis PV Planner software as a tool to analyze the performance a 110 kWp solar photovoltaic rooftop plant and also compares the performances of different PV technologies based on simulated energy yield and performance ratio. Solargis proves to easy, fast, accurate and reliable software tool for the simulation of solar PV system.

RpA, an extracellular protease similar to the metalloprotease of serralysin family, is required for pathogenicity of Ralstonia pickettii.

Science.gov (United States)

Chen, C-M; Liu, J-J; Chou, C-W; Lai, C-H; Wu, L-T

2015-10-01

To investigate the biochemical and functional properties of an extracellular protease, RpA, in Ralstonia pickettii WP1 isolated from water supply systems. An extracellular protease was identified and characterized from R. pickettii WP1. A mutant strain WP1M2 was created from strain WP1 by mini-Tn5 transposition. The culture filtrates from WP1M2 had a lower cytotoxic effect than the parental WP1 on several mammalian cell lines. Cloning and sequence analysis revealed the Tn5 transposon inserted at a protease gene (rpA) which is 81% homologous to prtA and aprX genes of Pseudomonas fluorescens. The rpA gene encodes a 482-residue protein showing sequence similarity to metalloproteases of the serralysin family. The RpA protein was expressed in Escherichia coli using a pET expression vector and purified as a 55 kDa molecular weight protein. Furthermore, the protease activity of RpA was inhibited by protease inhibitor and heat treatment. The in vitro cytotoxic activity of R. pickettii culture filtrates was attributed to RpA protease. An extracellular protease, RpA, was identified from R. pickettii WP1 isolated from water supply system. The RpA metalloproteases is required for the pathogenicity of R. pickettii to mammalian cell lines. © 2015 The Society for Applied Microbiology.

Empirical Data and Results of the Construct Vadility Studies

NARCIS (Netherlands)

Ravaja, N.; de Kort, Y.A.W.; IJsselsteijn, W.A.; Klimmt, C.; Lindley, C.; Mathiak, K.; Turpeinen, M.

2007-01-01

In this deliverable, the WP5 partners present the results of the FUGA construct validity studies. The objective of the WP5 was to establish the construct validity of the different potential measures of game experience based on the different measurement techniques. This was the first step to ensure

Wpływ ilości spożywanych posiłków na wartość wskaźnika BMI = Influence amount of food meals for BMI

OpenAIRE

Nalepa, Dorota; Weber, Dorota; Rogala, Renata; Charzyńska-Gula, Marianna

2016-01-01

Nalepa, Dorota, Weber, Dorota, Rogala, Renata, Charzyńska-Gula, Marianna. Wpływ ilości spożywanych posiłków na wartość wskaźnika BMI = Influence amount of food meals for BMI. Journal of Education, Health and Sport. 2016;6(3):48-61. eISSN 2391-8306. DOI http://dx.doi.org/10.5281/zenodo.47438 http://ojs.ukw.edu.pl/index.php/johs/article/view/3400 https://pbn.nauka.gov.pl/works/719646 The journal has had 7 points in Ministry of Science and Higher Education parametric evaluation...

Possibilities and performance of international biofuel trade from CEEC to WEC

International Nuclear Information System (INIS)

Van Dam, J.; Faaij, A.P.C.; Lewandowski, I.M.; Van Zeebroeck, B.

2005-01-01

The aim of the VIEWLS-project is to achieve clear views on information and future perspectives of biofuels for transportation. The project aims at assisting policy makers, NGO's and industrial decision makers in the selection of optimal pathways for the development and market introduction of biofuels in Europe. This report concerns the results of Work Package 4, Chain Definition and Analysis. The main objectives are to define the critical factors to set up a stable international biofuel trade between Central and Eastern European Countries (CEEC) and Western European Countries (WEC); to estimate the cost performance of the energy carriers delivered in the WEC from CEEC; and to analyze the regional differences in cost performance of the energy carriers in the CEEC

Implementation of Localized Corrosion in the Performance Assessment Model for Yucca Mountain

International Nuclear Information System (INIS)

Jain, V.; SEVOUGIAN, D.S.; MATTIE, P.D.; MACKINNON, R.J.

2005-01-01

A total system performance assessment (TSPA) model has been developed to analyze the ability of the natural and engineered barriers of the Yucca Mountain repository to isolate nuclear waste for the 10,000-year period following repository closure. The principal features of the engineered barrier system (EBS) are emplacement tunnels (or ''drifts'') containing a two-layer waste package (WP) for waste containment and a titanium drip shield to protect the waste package from seeping water and falling rock. The 20-mm-thick outer shell of the WP is composed of Alloy 22, a highly corrosion-resistant nickel-based alloy, while the 50-mm inner shell is composed of 316 stainless steel (modified with lower carbon and nitrogen compositions), whose primary purpose is to provide structural strength. The barrier function of the EBS is to isolate the waste from the migrating water with its associated chemical conditions that eventually lead to degradation of the waste packages and mobilization of the radionuclides within the packages

Participation in EU SARNET2 Project for an Enhancement of Severe Accident Evaluation Capability in Domestic NPPs

International Nuclear Information System (INIS)

Ahn, Kwang Il; Hong, S. W.; Kim, S. B.; Park, J. H.; Song, Y. M.

2010-07-01

The following results were obtained from the first year SARNET2 research activities. - WP4-2 session : acquisition of ASTEC 2.0 execution version, user manual and modeling/technical report for main six modules, code familiarization via ASTEC 2.0 code structure analysis and sample calculations. - WP6-4 session : preliminary calculations for APR1400 MCCI using MELCOR code. - WP7-1 session : thermal-hydraulic review of particle solidification model for steam explosion, suggestion of further activities for modeling corium material effect, review of physio-chemical particles and its applicability for modeling corium material effect. - WP7-2 session: review and benchmark analysis of ENACCEF experiments by participating in Task 3 'Combustion benchmark', and submission of analysis results for blind tests and preparation of analysis for open tests. - WP8-3 session: acquisition of ISTP Database and recent reports for two experiments (EPICUR/PARIS), review of technical issues in ST/FP, and selection of its domestic application field. The foregoing research results and experimental database for main SA issues obtained by this research are expected to be used for resolving SA issue remained in domestic NPPs (operating, to be constructed, future) and enhancing the evaluating capability of Level-2 PSA

Early Clinical Outcomes and Toxicity of Intensity Modulated Versus Conventional Pelvic Radiation Therapy for Locally Advanced Cervix Carcinoma: A Prospective Randomized Study

Energy Technology Data Exchange (ETDEWEB)

Gandhi, Ajeet Kumar, E-mail: ajeetgandhi23@gmail.com [Department of Radiation Oncology, All India Institute of Medical Sciences, New Delhi (India); Sharma, Daya Nand; Rath, Goura Kisor; Julka, Pramod Kumar; Subramani, Vellaiyan; Sharma, Seema; Manigandan, Durai; Laviraj, M.A. [Department of Radiation Oncology, All India Institute of Medical Sciences, New Delhi (India); Kumar, Sunesh [Department of Obstetrics and Gynecology, All India Institute of Medical Sciences, New Delhi (India); Thulkar, Sanjay [Department of Radiodiagnosis, All India Institute of Medical Sciences, New Delhi (India)

2013-11-01

Purpose: To evaluate the toxicity and clinical outcome in patients with locally advanced cervical cancer (LACC) treated with whole pelvic conventional radiation therapy (WP-CRT) versus intensity modulated radiation therapy (WP-IMRT). Methods and Materials: Between January 2010 and January 2012, 44 patients with International Federation of Gynecology and Obstetrics (FIGO 2009) stage IIB-IIIB squamous cell carcinoma of the cervix were randomized to receive 50.4 Gy in 28 fractions delivered via either WP-CRT or WP-IMRT with concurrent weekly cisplatin 40 mg/m{sup 2}. Acute toxicity was graded according to the Common Terminology Criteria for Adverse Events, version 3.0, and late toxicity was graded according to the Radiation Therapy Oncology Group system. The primary and secondary endpoints were acute gastrointestinal toxicity and disease-free survival, respectively. Results: Of 44 patients, 22 patients received WP-CRT and 22 received WP-IMRT. In the WP-CRT arm, 13 patients had stage IIB disease and 9 had stage IIIB disease; in the IMRT arm, 12 patients had stage IIB disease and 10 had stage IIIB disease. The median follow-up time in the WP-CRT arm was 21.7 months (range, 10.7-37.4 months), and in the WP-IMRT arm it was 21.6 months (range, 7.7-34.4 months). At 27 months, disease-free survival was 79.4% in the WP-CRT group versus 60% in the WP-IMRT group (P=.651), and overall survival was 76% in the WP-CRT group versus 85.7% in the WP-IMRT group (P=.645). Patients in the WP-IMRT arm experienced significantly fewer grade ≥2 acute gastrointestinal toxicities (31.8% vs 63.6%, P=.034) and grade ≥3 gastrointestinal toxicities (4.5% vs 27.3%, P=.047) than did patients receiving WP-CRT and had less chronic gastrointestinal toxicity (13.6% vs 50%, P=.011). Conclusion: WP-IMRT is associated with significantly less toxicity compared with WP-CRT and has a comparable clinical outcome. Further studies with larger sample sizes and longer follow-up times are warranted to justify

Influence of Polycarboxylate Superplasticizers on Rheological Properties of Cement Slurries Used in Drilling Technologies / Wpływ Superplastyfikatorów Z Grupy Polikarboksylanów Na Właściwości Reologiczne Zaczynów Cementowych Stosowanych W Technologiach Wiertniczych

Science.gov (United States)

Stryczek, Stanisław; Wiśniowski, Rafał; Gonet, Andrzej; Złotkowski, Albert; Ziaja, Jan

2013-09-01

Sealing slurries, mainly the cement-based ones, are concentrated dispersive systems, containing solid particles of considerably developed specific surface. Rheologically, such systems are very complex. This also stems from the fact that the rheological properties have a significant effect on: • additives and admixtures modifying technological properties of fresh and set slurries, • chemically complex mechanism of hydration in a slurry in a function of time. Special attention should paid to plasticizing (plasticizers PL) and liquefying (traditional and new- -generation superplasticizers SP) admixtures affecting the modification and optimization of rheological properties of fresh cement slurries as far as providing efficiency of sealing of casing pipes is concerned. Laboratory analyses were focused on proving the following thesis: properly selected type of superplasticizer [by BASF Polska Sp.z o.o. (The Chemical Company) - Admixtures for Concrete Division] advantageously affects the rheological parameters of sealing slurry based on metallurgical cement CEM III /A 32,5. The following variables were used in the analyses: • type of superplasticizer, • type of batch fluid. The laboratory experiments were made on superplasticizers produced by BASF: • SKY 501, • SKY 503, • SKY 591, • ACE 430, • Glenium 115. The superplasticizer concentration in the slurry was 0.5 wt% (as compared with mass of dry cement). Water to cement ratio for the analyzed sealing slurries was equal to 0.5. The sealing slurries were made of metallurgical cement CEM III/A 32,5 N-LH/HSR/N Lafarge Cement S.A. in Małogoszcz. Zaczyny uszczelniające, a zwłaszcza typu cementowego, są skoncentrowanymi układami dyspersyjnymi, zawierającymi cząstki stałe o znacznie rozwiniętej powierzchni właściwej. Układy takie pod względem reologicznym należą do niezwykle złożonych. Wynika to między innymi z faktu, że na właściwości reologiczne w sposób istotny wpływają: • dodatki i

Performance of NiWP/Al2O3 catalyst for hydroprocessing of light gas oils derived from Athabasca bitumen

Energy Technology Data Exchange (ETDEWEB)

Owusu-Boakye, A.; Ferdous, D.; Dalai, A.K. [Saskatchewan Univ., Saskatoon, SK (Canada). Dept. of Chemistry and Chemical Engineering; Adjaye, J. [Syncrude Canada Ltd., Edmonton, AB (Canada). Edmonton Research Centre

2004-07-01

The quality of diesel fuel in terms of cetane number and coloring is diminished if it has a high content of aromatics which cause the formation of undesirable emissions in exhaust gases. These compounds typically occur as mono, di, tri and polyaromatics. In response to strict environmental regulations, middle distillates now have fewer aromatics. Sulphur and nitrogen compounds in diesel fuels also cause the formation of SOx and NOx in the atmosphere, but the aromatic hydrogenation of diesel fuels is more complex than any of the hydrodesulphurization (HDS) or hydrodenitrogenation (HDN) processes. The NiWP/Al{sub 2}O{sub 3} catalyst in a trickle-bed reactor was used under a range of temperature and pressure conditions to study the reactivity of vacuum, atmospheric and hydrocracked light gas oils produced from Athabasca bitumen. The hydrogen feed ratio was kept constant and product samples from different feedstocks were analyzed with respect to sulfur, nitrogen and aromatic content. The study also included a comparison of gasoline selectivity and kinetic parameters for HDS and HDN reactions for the feed materials.

Assessment of Impact of the Rheological Parameters Change on Sensitivity of the Asphalt Strain Based on the Test Results / Ocena Wpływu Zmiany Parametrów Reologicznych Na Wrażliwość Deformacji Mieszanek Mineralno - Asfaltowych Na Podstawie Wyników Badań

Science.gov (United States)

Kurpiel, Artur; Wysokowski, Adam

2015-03-01

The creep test under the static loading, that allows to determine rheological properties of asphalt based on the creep curve, is the most effective test nowadays. Applied loads are non-destructive and allow to observe the course of the strain after the test load. The test can be carried out on compressing, shearing, bending as well as on triaxial test, that depends on the applied apparatus implementing different intensity [1, 2, 3, 4, 5, 6]. Based on the creep test, the stress of different properties can be specified. Among them there are valuable rheological properties based on selected viscoelascity models [1]. The properties of the viscoelascity models are relevant indexes depicting resistance to deformation. They can be used to forecast the wheel-truck in the accepted rheological model [1]. In this article it is shown the impact of different rheological properties of the viscoelacity model on the wheel-truck as well as the impact of different properties on shape and the course of the creep curve. The asphalt mixtures presented in this article are characterized by variable rheological properties. It is therefore difficult to determine which property mostly affects the size of the strain. However, the authors of this article attempted to analyse the change of the asphalt strain value of the different variables in particular rheological model, called Bürgers's model. Badanie pełzania pod obciążeniem statycznym jest obecnie najbardziej efektywnym badaniem pozwalającym na określenie reologicznych parametrów mieszanek mineralno - asfaltowych na podstawie krzywej pełzania. Stosowane obciążenia mają poziom nieniszczący i pozwalają na obserwację przebiegu odkształceń w czasie również po odciążeniu. Badanie może być realizowane przy ściskaniu, ścinaniu, rozciąganiu i zginaniu, a także w zakresie trójosiowym, w zależności od stosowanego aparatu realizującego zadany schemat naprężeń [1, 2, 3, 4, 5, 6]. Na podstawie badania pełzania mo

WP3 Prototype development for operational planning tool

Energy Technology Data Exchange (ETDEWEB)

Kristoffersen, T.; Meibom, P. (Technical Univ. of Denmark. Risoe DTU (Denmark)); Apfelbeck, J.; Barth, R.; Brand, H. (IER, Univ. of Stuttgart (Germany))

2008-04-15

This report documents the model development carried out in work package 3 in the SUPWIND project. It was decided to focus on the estimation of the need for reserve power, and on the reservation of reserve power by TSOs. Reserve power is needed to cover deviations from the day-ahead forecasts of electricity load and wind power production, and to cover forced outages of power plants and transmission lines. Work has been carried out to include load uncertainty and forced outages in the two main components of the Wilmar Planning tool namely the Scenario Tree Tool and the Joint Market Model. This work is documented in chapter 1 and 2. The inclusion of load uncertainty and forced outages in the Scenario Tree Tool enables calculation of the demand for reserve power depending on the forecast horizon. The algorithm is given in Section 3.1. The design of a modified version of the Joint Market Model enabling estimation of the optimal amount of reserve power to reserve day-ahead before the actual operation hour is documented in Section 3.2. With regard to the evaluation of a power system, its ability to cope with extreme events is crucial to be investigated. Chapter 4 gives a definition of such extreme events. Further, the methodology to identify extreme events on the basis of the existing tools is described. Within the SUPWIND consortium there has been an interest in using the Joint Market Model to model smaller parts of a power system but with more detailed representation of the transmission and distribution grid. Chapter 5 documents this work. (author)

Proprietary policy and production

Czech Academy of Sciences Publication Activity Database

Jeong, Byeongju

-, č. 287 (2006), s. 1-14 ISSN 1211-3298 Institutional research plan: CEZ:MSM0021620846 Keywords : proprietary regime * direct production * model Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp287.pdf

Expanding the 5E Model.

Science.gov (United States)

Eisenkraft, Arthur

2003-01-01

Amends the current 5E learning cycle and instructional model to a 7E model. Changes ensure that instructors do not omit crucial elements for learning from their lessons while under the incorrect assumption that they are meeting the requirements of the learning cycle. The proposed 7E model includes: (1) engage; (2) explore; (3) explain; (4) elicit;…

Alternative models of DSM-5 PTSD

DEFF Research Database (Denmark)

Murphy, Siobhan; Hansen, Maj; Elklit, Ask

2018-01-01

estimated within a confirmatory factor analytic framework using the PTSD Checklist for DSM-5 (PCL-5). Data were analysed from a Malaysian adolescent community sample (n=481) of which 61.7% were female, with a mean age of 17.03 years. The results indicated that all models provided satisfactory model fit...

ULTimateCO2 - State of the art report. Dealing with uncertainty associated with long-term CO2 geological storage

International Nuclear Information System (INIS)

2014-01-01

ULTimateCO2, a four-year collaborative project financed by the 7. Framework Programme and coordinated by BRGM, aims to shed more light on the long-term processes associated with the geological storage of CO 2 . ULTimateCO2 unites 12 partners (research institutes, universities, industrialists) and a varied panel of experts (NGOs, national authority representatives, IEAGHG,...). Based on a multidisciplinary approach, and bringing together laboratory experiments, numerical modelling and natural analogue field studies, ULTimateCO2 will increase our understanding of the long-term effects of CO 2 Capture and Storage (CCS) in terms of hydrodynamics, geochemistry, mechanics of the storage formations and their vicinity. The report contains the partners' pooled knowledge and provides a view of the current state-of-the-art for the issues addressed by this project: - The long-term reservoir trapping efficiency (WP3); - The long-term sealing integrity of faulted and fractured cap-rock (WP4); - The near-well leakage characterisation and chemical processes (WP5); - The long-term behavior of stored CO 2 looking at the basin scale (WP2); - Uncertainty assessment (WP6). Each chapter is divided into two sections: (i) a summary which explains in 'simple words' the main issues and objectives of the WP, and (ii) a current state of the art section which provides a more sound review on the specific studied processes. The aim is to provide answers to pertinent questions from a variety of users, particularly project owners, site operators and national authorities, about their exposure to uncertainty downstream of closure of a CO 2 geological storage site

Refined analysis results for multimedia network costs and profits

DEFF Research Database (Denmark)

Tahkokorpi, M.; Falch, Morten; Skouby, Knud Erik

This deliverable describes the techno-economic business model developed in EURORIM WP3 and presents the refined results of the multimedia service delivery cost-profit calculations......This deliverable describes the techno-economic business model developed in EURORIM WP3 and presents the refined results of the multimedia service delivery cost-profit calculations...

Quantification of whey proteins by reversed phase-HPLC and effectiveness of mid-infrared spectroscopy for their rapid prediction in sweet whey.

Science.gov (United States)

Sturaro, Alba; De Marchi, Massimo; Masi, Antonio; Cassandro, Martino

2016-01-01

In the dairy industry, membrane filtration is used to reduce the amount of whey waste and, simultaneously, to recover whey proteins (WP). The composition of WP can strongly affect the filtration treatment of whey, and rapid determination of WP fractions would be of interest for dairy producers to monitor WP recovery. This study aimed to develop mid-infrared spectroscopy (MIRS) prediction models for the rapid quantification of protein in sweet whey, using a validated rapid reversed phase (RP)-HPLC as a reference method. Quantified WP included α-lactalbumin (α-LA), β-lactoglobulin (β-LG) A and B, bovine serum albumin, caseinomacropeptides, and proteose peptone. Validation of RP-HPLC was performed by calculating the relative standard deviation (RSD) in repeatability and reproducibility tests for WP retention time and peak areas. Samples of liquid whey (n=187) were analyzed by RP-HPLC and scanned through MIRS to collect spectral information (900 to 4,000 cm(-1)); statistical analysis was carried out through partial least squares regression and random cross-validation procedure. Retention times in RP-HPLC method were stable (RSD between 0.03 and 0.80%), whereas the RSD of peak area (from 0.25 to 8.48%) was affected by WP relative abundance. Higher coefficients of determination in validation for MIRS model were obtained for protein fractions present in whey in large amounts, such as β-LG (0.58), total identified WP (0.58), and α-LA (0.56). Results of this study suggest that MIRS is an easy method for rapid quantification of detail protein in sweet whey, even if better resolution was achieved with the method based on RP-HPLC. The prediction of WP in sweet whey by MIRS might be used for screening and for classifying sweet whey according to its total and individual WP contents. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Macroeconomic stability: transition towards the nominal exchange rate stability

Czech Academy of Sciences Publication Activity Database

Brázdik, František; Antal, J.

-, č. 368 (2008), s. 1-48 ISSN 1211-3298 Institutional research plan: CEZ:MSM0021620846 Keywords : monetary regime switch * modeling * small open economy Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp368.pdf

Integrative Modeling of cap-rock Integrity in the Context of CO2 Storage: Evolution of Transport and Geochemical Properties and Impact on Performance and Safety Assessment

International Nuclear Information System (INIS)

Bildstein, O.; Credoz, A.; Jullien, M.; Kervevan, C.; Audigane, P.; Jacquemet, N.; Lagneau, V.; Delaplace, P.; Perfetti, E.

2010-01-01

The objective of the 'Geocarbone-INTEGRITE' project (2005-2008) was to develop a methodology to assess the integrity of the cap-rock involved in the geological storage of CO 2 . A specific work package of the project (WP5) was dedicated to the integration of (1) the phenomenology describing the evolution of the storage system with a focus on the mechanisms occurring in the cap-rock and at the interface with the cap-rock, and (2) the data obtained from the investigation of petrographical, geomechanical, and geochemical properties, before and after reaction with CO 2 -rich solutions, performed in the other work packages (WP1 to WP4). This knowledge was introduced in numerical models and specific safety scenarios were defined in order to assess the performance of the CO 2 storage system. The results of the modeling show that the injection of CO 2 can potentially have a significant effect on the cap-rock by changing the porosity due to the dissolution and precipitation of minerals, but that the impact is limited to a zone from several decimeters to several meters of the cap-rock close to the interface with the reservoir depending on whether the supercritical carbon dioxide (SC-CO 2 ) plume enters into the cap-rock and if fractures are present at this location. The methodology used in this project can be applied to a pilot site for the injection of CO 2 in the Paris Basin. A key aspect of the safety of such a facility will be to look at the coupling of geochemical alteration and the evolution of geomechanical properties in the short and medium terms (several hundreds of years). The challenge for the future will be to structure and apply the safety assessment methodology with an operational finality, in order to support the robustness of the transition step to CGS projects at the industrial scale. (authors)

Partnew - New solvent extraction processes for minor actinides - final report

International Nuclear Information System (INIS)

Madic, C.; Testard, F.; Hudson, M.J.; Liljenzin, J.O.; Christiansen, B.; Ferrando, M.; Facchini, A.; Geist, A.; Modolo, G.; Gonzalez-Espartero, A.; Mendoza, J. de

2004-01-01

The objectives of the European project PARTNEW were to define solvent extraction processes for the partitioning of the minor actinides, Am and Cm, from the aqueous high active raffinate or high active concentrate issuing the reprocessing of nuclear spent fuels by the PUREX process. Eleven laboratories participated to the research: 1/ CEA-DEN (Marcoule), 2/ CEA-DSM (Saclay), 3/ UREAD (U.K.), 4/ CTU (Sweden), 5/ ITU (Germany), 6/ ENEA (Italy), 7/ PoliMi (Italy), 8/ FZK-INE (Germany), 9/ FZJ-ISR (Germany), 10/ CIEMAT (Spain) and 11/ UAM (Spain). The research was organised into eight work packages (WP): Basic and applied DIAMEX studies, using diamide extractants for the co-extraction of actinides(III) (An(III)) and lanthanides(III) (Ln(III)) nitrates (WP1 and WP2), Basic and applied SANEX studies based on the use of polydentate N-ligands for the An(III)/Ln(III) separation (WP3 and WP4), Basic and applied SANEX studies based on the use of synergistic mixtures made of bis-(chloro-phenyl)-di-thio-phosphinic acid + neutral O-bearing ligand, (WP5 and WP6), Basic SANEX studies for the An(III)/Ln(III) separation, based on the use of new S-bearing ligands, Basic and applied studies for the Am(III)/Cm(III) separation. The work done in the fundamental and applied domains was very fruitful. Several processes have been successfully tested with genuine high active raffinates and concentrate. (authors)

Partnew - New solvent extraction processes for minor actinides - final report; Partnew - Nouveaux procedes d'extraction par solvant pour les actinides mineurs - rapport final

Energy Technology Data Exchange (ETDEWEB)

Madic, C.; Testard, F.; Hudson, M.J.; Liljenzin, J.O.; Christiansen, B.; Ferrando, M.; Facchini, A.; Geist, A.; Modolo, G.; Gonzalez-Espartero, A.; Mendoza, J. de

2004-07-01

The objectives of the European project PARTNEW were to define solvent extraction processes for the partitioning of the minor actinides, Am and Cm, from the aqueous high active raffinate or high active concentrate issuing the reprocessing of nuclear spent fuels by the PUREX process. Eleven laboratories participated to the research: 1/ CEA-DEN (Marcoule), 2/ CEA-DSM (Saclay), 3/ UREAD (U.K.), 4/ CTU (Sweden), 5/ ITU (Germany), 6/ ENEA (Italy), 7/ PoliMi (Italy), 8/ FZK-INE (Germany), 9/ FZJ-ISR (Germany), 10/ CIEMAT (Spain) and 11/ UAM (Spain). The research was organised into eight work packages (WP): Basic and applied DIAMEX studies, using diamide extractants for the co-extraction of actinides(III) (An(III)) and lanthanides(III) (Ln(III)) nitrates (WP1 and WP2), Basic and applied SANEX studies based on the use of polydentate N-ligands for the An(III)/Ln(III) separation (WP3 and WP4), Basic and applied SANEX studies based on the use of synergistic mixtures made of bis-(chloro-phenyl)-di-thio-phosphinic acid + neutral O-bearing ligand, (WP5 and WP6), Basic SANEX studies for the An(III)/Ln(III) separation, based on the use of new S-bearing ligands, Basic and applied studies for the Am(III)/Cm(III) separation. The work done in the fundamental and applied domains was very fruitful. Several processes have been successfully tested with genuine high active raffinates and concentrate. (authors)

Report on Integrating Activities and Models for Collaboration

DEFF Research Database (Denmark)

Buus, Lillian; Dirckinck-Holmfeld, Lone; Ryberg, Thomas

This report is the deliverable for work package (WP) 28.3 “Integrated network and activities for the exchange of and collaboration between Master students, PhD students and professors” of the European Research Team (ERT) on Conditions for Productive Networked Learning Environments. The objective...... of WP28.3 is to build up an integrated network and activities for the exchange and collaboration between Master students, professional masters, PhD students and professors and to establish a virtual community around the research area of conditions for productive learning in networked learning...

Announced regime switch: optimal policy for transition period

Czech Academy of Sciences Publication Activity Database

Brázdik, František

-, č. 402 (2009), s. 1-49 ISSN 1211-3298 Institutional research plan: CEZ:MSM0021620846 Keywords : new Keynesian models * small open economy * monetary regime Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp402.pdf

Seismic Risk Assessment and Loss Estimation for Tbilisi City

Science.gov (United States)

Tsereteli, Nino; Alania, Victor; Varazanashvili, Otar; Gugeshashvili, Tengiz; Arabidze, Vakhtang; Arevadze, Nika; Tsereteli, Emili; Gaphrindashvili, Giorgi; Gventcadze, Alexander; Goguadze, Nino; Vephkhvadze, Sophio

2013-04-01

The proper assessment of seismic risk is of crucial importance for society protection and city sustainable economic development, as it is the essential part to seismic hazard reduction. Estimation of seismic risk and losses is complicated tasks. There is always knowledge deficiency on real seismic hazard, local site effects, inventory on elements at risk, infrastructure vulnerability, especially for developing countries. Lately great efforts was done in the frame of EMME (earthquake Model for Middle East Region) project, where in the work packages WP1, WP2 , WP3 and WP4 where improved gaps related to seismic hazard assessment and vulnerability analysis. Finely in the frame of work package wp5 "City Scenario" additional work to this direction and detail investigation of local site conditions, active fault (3D) beneath Tbilisi were done. For estimation economic losses the algorithm was prepared taking into account obtained inventory. The long term usage of building is very complex. It relates to the reliability and durability of buildings. The long term usage and durability of a building is determined by the concept of depreciation. Depreciation of an entire building is calculated by summing the products of individual construction unit' depreciation rates and the corresponding value of these units within the building. This method of calculation is based on an assumption that depreciation is proportional to the building's (constructions) useful life. We used this methodology to create a matrix, which provides a way to evaluate the depreciation rates of buildings with different type and construction period and to determine their corresponding value. Finally loss was estimated resulting from shaking 10%, 5% and 2% exceedance probability in 50 years. Loss resulting from scenario earthquake (earthquake with possible maximum magnitude) also where estimated.

THE EFFECTS OF PRE-AND POST-EXERCISE WHEY VS. CASEIN PROTEIN CONSUMPTION ON BODY COMPOSITION AND PERFORMANCE MEASURES IN COLLEGIATE FEMALE ATHLETES

Directory of Open Access Journals (Sweden)

olin D. Wilborn

2013-03-01

Full Text Available Two of the most popular forms of protein on the market are whey and casein. Both proteins are derived from milk but each protein differs in absorption rate and bioavailability, thus it is possible that each type of protein may contribute differently to the adaptations elicited through resistance training. Therefore, the purpose of this study was to investigate the potential effects of ingestion of two types of protein in conjunction with a controlled resistance training program in collegiate female basketball players. Sixteen NCAA Division III female basketball players were matched according to body mass and randomly assigned in a double-blind manner to consume 24 g whey protein (WP (N = 8, 20.0 ± 1.9 years, 1.58 ± 0.27 m, 66. 0 ± 4.9 kg, 27.0 ± 4.9 %BF or 24 g casein protein (CP (N = 8, 21.0 ± 2.8 years, 1.53 ± 0.29 m, 68.0 ± 2.9 kg, 25.0 ± 5.7 %BF immediately pre- and post-exercise for eight weeks. Subjects participated in a supervised 4-day per week undulating periodized training program. At 0 and 8 weeks, subjects underwent DXA body composition analysis, and at 0 and 8 weeks underwent one repetition maximum (1RM strength, muscle endurance, vertical jump, 5-10-5 agility run, and broad jump testing sessions. Data were analyzed using repeated measures ANOVA, and presented as mean ± SD changes from baseline after 60 days. No significant group x time interaction effects were observed among groups in changes in any variable (p > 0.05. A significant time effect was observed for body fat (WP: -2.0 ± 1.1 %BF; CP: -1.0 ± 1.6 %BF, p < 0.001, lean mass (WP: 1.5 ± 1.0 kg; CP: 1. 4 ± 1.0 kg, p < 0.001, fat mass (WP: -1.3 ± 1.2 kg; CP: -0.6 ± 1.4 kg, p < 0.001, leg press 1RM (WP: 88.7 ± 43.9 kg; CP: 90.0 ± 48.5 kg, p < 0.001, bench press 1RM (WP: 7.5 ± 4.6 kg; CP: 4.3 ± 4.5 kg, p = 0.01, vertical jump (WP: 4.1 ± 1.8 cm; CP: 3.5 ± 7.6 cm, p < 0.001, 5-10-5 (WP: -0.3 ± 0.2 sec; CP: -0.09 ± 0.42 sec, p < 0.001, and broad jump (WP: 10

Wine grape pomace as antioxidant dietary fibre for enhancing nutritional value and improving storability of yogurt and salad dressing.

Science.gov (United States)

Tseng, Angela; Zhao, Yanyun

2013-05-01

Wine grape pomace (WGP) as a source of antioxidant dietary fibre (ADF) was fortified in yogurt (Y), Italian (I) and Thousand Island (T) salad dressings. During the 3 weeks of storage at 4 °C, viscosity and pH of WGP-Y increased and decreased, respectively, but syneresis and lactic acid percentage of WGP-Y and pH of WGP-I and WGP-T were stable. Adding WGP resulted in 35-65% reduction of peroxide values in all samples. Dried whole pomace powder (WP) fortified products had dietary fibre content of 0.94-3.6% (w/w product), mainly insoluble fractions. Total phenolic content and DPPH radical scavenging activity were 958-1340 mg GAE/kg product and 710-936 mg AAE/kg product, respectively. The highest ADF was obtained in 3% WP-Y, 1% WP-I and 2% WP-T, while 1% WP-Y, 0.5% WP-I and 1% WP-T were mostly liked by consumers based on the sensory study. Study demonstrated that WGP may be used as a functional food ingredient for promoting human health and extending shelf-life of food products. Copyright © 2012 Elsevier Ltd. All rights reserved.

Varied representation of the West Pacific pattern in multiple dynamical seasonal predictions of APCC-MME

Science.gov (United States)

Lee, Yun-Young

2017-04-01

West Pacific (WP) teleconnection pattern is one of the well-known primary modes of boreal winter low-frequency variability (LFV) resolved in 500 hPa geopotential height and its phase and amplitude strongly influence regional weather conditions including temperature and rainfall extremes [Baxter and Nigam, 2015; Hsu and Wallace, 1985; Linkin and Nigam, 2008; Mo and Livezey, 1986; Thompson and Wallace, 1998; Wallace and Gutzler, 1981]. This study primary aims to evaluate individual 11 GCMs seasonal hindcasts employed as members of multi-model ensemble (MME) produced in APEC Climate Center (APCC) in representing WP. For the extensive and comprehensive evaluation, this study applied seven verification metrics in three scopes: (a) temporal representation of observed indices, (b) spatial mode separation in the Northern Hemisphere (NH), and (c) regional mode isolated in the preset longitudinal domain. Verification results display quite large inter-model spread. Some models mimic observed index variability while others display large bias of index variability compared to climatology. Basic north-south dipole pattern is mostly well reproduced in both rotated and unrotated loading modes. However, each individual seasonal forecast model exhibits slightly different behavior (e.g. amplification/weakening, zonal and meridional shift, downstream extension and so forth) in representing spatial structure of WP. When taking all 7 metrics into account, one Europe (CMCC) model, one Oceania (POAMA) model and two North America (NASA and NCEP) models are classified as relatively good performers while PNU is classified as a matchless poor performer out of 11. Least WP representing skill of PNU is sort of consistent with the largest bias of NH total variability. This study further tries to examine winter mean biases of individual models and figure out how mean bias is linked to WP representation in model world. Model bias of winter climatology is investigated focusing on six large scale

WHITE PANICLE3, a Novel Nucleus-Encoded Mitochondrial Protein, Is Essential for Proper Development and Maintenance of Chloroplasts and Mitochondria in Rice

Directory of Open Access Journals (Sweden)

Hongchang Li

2018-06-01

Full Text Available Mitochondria and chloroplasts are interacting organelles that play important roles in plant development. In addition to a small number proteins encoded by their own genomes, the majority of mitochondrial and chloroplast proteins are encoded in the cell nucleus and imported into the organelle. As a consequence, coordination between mitochondria, chloroplasts, and the nucleus is of crucial importance to plant cells. Variegated mutants are chloroplast-defective mutants and are considered to be ideal models for studying the intercommunication between these organelles. Here, we report the isolation of WHITE PANICLE3 (WP3, a nuclear gene involved in variegation, from a naturally occurring white panicle rice mutant. Disrupted expression of WP3 in the mutant leads to severe developmental defects in both chloroplasts and mitochondria, and consequently causes the appearance of white-striped leaves and white panicles in the mutant plants. Further investigation showed that WP3 encodes a protein most likely targeted to mitochondria and is specifically expressed in rice panicles. Interestingly, we demonstrate that the recessive white-panicle phenotype in the wp3 mutant is inherited in a typical Mendelian manner, while the white-striped leaf phenotype in wp3 is maternally inherited. Our data collectively suggest that the nucleus-encoded mitochondrial protein, WP3, plays an essential role in the regulation of chloroplast development in rice panicles by maintaining functional mitochondria. Therefore, the wp3 mutant is an excellent model in which to explore the communication between the nucleus, mitochondria, and chloroplasts in plant cells.

Modification of UV-induced mutation frequency and cell survival of Escherichia coli B/r WP2 trpE65 by treatment before irradiation

International Nuclear Information System (INIS)

Doudney, C.O.; Rinaldi, C.N.

1984-01-01

The UV radiation survival curve of exponentially growing cultures of Escherichia coli B/r WP2 trpE65 was modified by pretreatment for short incubation periods (up to 20 min) with chloramphenicol such that an extended exponential section of intermediate slope appeared between the shoulder and the final exponential slope. Surges of mutation to tryptophan independence occurred with each increase in slope of the survival curve. These surges were separated by extended sections of little mutation. Nalidixic acid prevented both the changes in survival and mutation. Mutation curves obtained with overnight cultures had three extended sections of little mutation alternating with section of high mutation. Reincubation for 60 min in fresh medium reduced or eliminated the low-response sections. These reappeared after 80 to 90 min, when DNA had doubled in the culture and before the initial synchronous cell divisions had occurred. Nalidixic acid prevented this reappearance

The effect of full coverage winglets on tip leakage aerodynamics over the plane tip in a turbine cascade

International Nuclear Information System (INIS)

Lee, Sang Woo; Cheon, Joo Hong; Zhang, Qiang

2014-01-01

Highlights: • The effect of full coverage (FC) winglets on tip leakage aerodynamics is tested. • A qualitative tip gap flow model for the FC winglet is suggested. • The FC winglet of w/p = 10.55% is considered an optimal one for the plane tip. -- Abstract: The effect of full coverage (FC) winglets on tip leakage aerodynamics over the plane tip in a turbine cascade has been investigated with the variation of winglet width (w) up to w/p = 15.83% for a tip gap-to-span (chord) ratio of h/s = 1.36% (h/c = 2.0%). A qualitative tip gap flow model for the FC winglet is suggested on the bases of the near-tip surface flow visualizations. As w/p increases, the passage vortex tends to be weakened meanwhile the tip leakage vortex becomes stronger and wall-jet-like. With an increment of w/p, the mass-averaged aerodynamic loss all over the measurement plane decreases steeply up to w/p = 10.55% and then becomes almost unchanged. Thus, the FC winglet of w/p = 10.55% is considered an optimal one for the plane tip. With respect to the baseline plane tip without winglet, the maximum mass-averaged loss reduction by installing the FC winglet on the plane tip is still somewhat smaller than that by employing the cavity squealer rim on the plane tip surface

Lactose reduced ice cream enriched with whey powder

Directory of Open Access Journals (Sweden)

Ana Claudia Tsuchiya

2017-05-01

Full Text Available Ice cream is a food product that pleases the palate of consumers worldwide. Whey powder (WP has various technological and functional properties. However, WP increases the lactose content of the final products in which it is incorporated and causes grittiness and intolerance in lactose-sensitive individuals. This study aimed to produce ice cream with milk powder (MP replaced by WP (MP/WP, decrease the lactose content by enzymatic hydrolysis and verify the physicochemical and microbiological parameters of the final product. Initially, the variables ?-galactosidase concentration and reaction time were studied for the response of the percentage of lactose hydrolysis in a milk ice cream base, using a full 22 factorial design(FFD.With the reaction conditions defined (0.5 g L-1 of ?-galactosidase at 37 C for 4 hthe sucrose concentration and MP/WP replacement variables were then studied in the ice cream formulation for the percentage of lactose hydrolysis and overrun responses using a 22 FFD. The lactose hydrolysis, which ranged between 86.59-97.97%, was not affected by the MP/WP replacement in the ice cream, whilst the overrun was increased by the MP/WP replacement. The physicochemical and microbiological parameters of the ice cream were either not influenced or positively influenced by lactose hydrolysis and MP/WP replacement.

An analysis of warm pool and cold tongue El Ninos: air-sea coupling processes, global influences, and recent trends

Energy Technology Data Exchange (ETDEWEB)

Hu, Zeng-Zhen; Kumar, Arun; Wang, Wanqiu [NCEP/NWS/NOAA, Climate Prediction Center, Camp Springs, MD (United States); Jha, Bhaskar; Huang, Boyin [NCEP/NWS/NOAA, Climate Prediction Center, Camp Springs, MD (United States); Wyle Information Systems, Camp Springs, MD (United States); Huang, Bohua [George Mason University, Department of Atmospheric, Oceanic, and Earth Sciences, College of Science, Fairfax, VA (United States); Center for Ocean-Land-Atmosphere Studies, Calverton, MD (United States)

2012-05-15

The differences in tropical air-sea interactions and global climate connection as well as the hindcast skills for the warm pool (WP) and cold tongue (CT) El Ninos are investigated based on observed, (re)analyzed, and model hindcast data. The robustness of observed global climate connection is established from the model simulations. Lastly, variations of atmosphere and ocean conditions in the recent decades, and their possible connection with the frequency increase of the WP El Nino are discussed. Consistent with previous results, our individual case study and composite results suggest that stronger (weaker) and more eastward extended (westward confined) westerly wind along the equatorial Pacific in early months of a year is associated with active (suppressed) air-sea interaction over the cold tongue/the Intertropical Convergence Zone complex, as well as more (less) intensive oceanic thermocline feedback, favoring the CT (WP) El Nino development. The preceding westerly wind signal and air-sea interaction differences may be responsible for the predication skill difference with higher (lower) overall hindcast skill for the CT (WP) El Nino in the Climate Forecast System of National Centers for Environmental Prediction. Our model experiments show that, in addition to the tropics, the eastern Pacific, North America and North Atlantic are the major regions having robust climate differences between the CT and WP El Ninos. Nevertheless, the climate contrasts seem not robust over the Eurasian continent. Also, the frequency increase of the WP El Nino in the recent decades may not be directly connected with the linear trend of the tropical climate. (orig.)

Thermal Performance Analysis of a Geologic Borehole Repository

Energy Technology Data Exchange (ETDEWEB)

Reagin, Lauren [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-08-16

The Brazilian Nuclear Research Institute (IPEN) proposed a design for the disposal of Disused Sealed Radioactive Sources (DSRS) based on the IAEA Borehole Disposal of Sealed Radioactive Sources (BOSS) design that would allow the entirety of Brazil’s inventory of DSRS to be disposed in a single borehole. The proposed IPEN design allows for 170 waste packages (WPs) containing DSRS (such as Co-60 and Cs-137) to be stacked on top of each other inside the borehole. The primary objective of this work was to evaluate the thermal performance of a conservative approach to the IPEN proposal with the equivalent of two WPs and two different inside configurations using Co-60 as the radioactive heat source. The current WP configuration (heterogeneous) for the IPEN proposal has 60% of the WP volume being occupied by a nuclear radioactive heat source and the remaining 40% as vacant space. The second configuration (homogeneous) considered for this project was a homogeneous case where 100% of the WP volume was occupied by a nuclear radioactive heat source. The computational models for the thermal analyses of the WP configurations with the Co-60 heat source considered three different cooling mechanisms (conduction, radiation, and convection) and the effect of mesh size on the results from the thermal analysis. The results of the analyses yielded maximum temperatures inside the WPs for both of the WP configurations and various mesh sizes. The heterogeneous WP considered the cooling mechanisms of conduction, convection, and radiation. The temperature results from the heterogeneous WP analysis suggest that the model is cooled predominantly by conduction with effect of radiation and natural convection on cooling being negligible. From the thermal analysis comparing the two WP configurations, the results suggest that either WP configuration could be used for the design. The mesh sensitivity results verify the meshes used, and results obtained from the thermal analyses were close to

United European Gastroenterology evidence-based guidelines for the diagnosis and therapy of chronic pancreatitis (HaPanEU).

Science.gov (United States)

Löhr, J Matthias; Dominguez-Munoz, Enrique; Rosendahl, Jonas; Besselink, Marc; Mayerle, Julia; Lerch, Markus M; Haas, Stephan; Akisik, Fatih; Kartalis, Nikolaos; Iglesias-Garcia, Julio; Keller, Jutta; Boermeester, Marja; Werner, Jens; Dumonceau, Jean-Marc; Fockens, Paul; Drewes, Asbjorn; Ceyhan, Gürlap; Lindkvist, Björn; Drenth, Joost; Ewald, Nils; Hardt, Philip; de Madaria, Enrique; Witt, Heiko; Schneider, Alexander; Manfredi, Riccardo; Brøndum, Frøkjer J; Rudolf, Sasa; Bollen, Thomas; Bruno, Marco

2017-03-01

There have been substantial improvements in the management of chronic pancreatitis, leading to the publication of several national guidelines during recent years. In collaboration with United European Gastroenterology, the working group on 'Harmonizing diagnosis and treatment of chronic pancreatitis across Europe' (HaPanEU) developed these European guidelines using an evidence-based approach. Twelve multidisciplinary review groups performed systematic literature reviews to answer 101 predefined clinical questions. Recommendations were graded using the Grading of Recommendations Assessment, Development and Evaluation system and the answers were assessed by the entire group in a Delphi process online. The review groups presented their recommendations during the 2015 annual meeting of United European Gastroenterology. At this one-day, interactive conference, relevant remarks were voiced and overall agreement on each recommendation was quantified using plenary voting (Test and Evaluation Directorate). After a final round of adjustments based on these comments, a draft version was sent out to external reviewers. The 101 recommendations covered 12 topics related to the clinical management of chronic pancreatitis: aetiology (working party (WP)1), diagnosis of chronic pancreatitis with imaging (WP2 and WP3), diagnosis of pancreatic exocrine insufficiency (WP4), surgery in chronic pancreatitis (WP5), medical therapy (WP6), endoscopic therapy (WP7), treatment of pancreatic pseudocysts (WP8), pancreatic pain (WP9), nutrition and malnutrition (WP10), diabetes mellitus (WP11) and the natural course of the disease and quality of life (WP12). Using the Grading of Recommendations Assessment, Development and Evaluation system, 70 of the 101 (70%) recommendations were rated as 'strong' and plenary voting revealed 'strong agreement' for 99 (98%) recommendations. The 2016 HaPanEU/United European Gastroenterology guidelines provide evidence-based recommendations concerning key aspects

Nonequilibrium constitutive models for RELAP5/MOD2

International Nuclear Information System (INIS)

Lin, J.C.; Trapp, J.A.; Riemke, R.A.; Ransom, V.H.

1983-01-01

RELAP5/MOD2 is a new version of RELAP5 containing improved modeling features that provide a generic pressurized-water transient simulation capability. In particular, the nonequilibrium modeling capability has been generalized to include conditions that occur in operational transients including repressurization and emergency-feed-water injection with loss-of-coolant accidents. The improvements include addition of a second energy equation to the hydrodynamic model, addition of nonequilibrium heat-transfer models, and the associated nonequilibrium vapor-generation models. The objective of this paper is to describe these models and to report the developmental assessment results obtained from similar of several separate effects experiments. The assessment shows that RELAP5 calculated results are in good agreement with data and the nonequilibrium phenomena are properly modeled

Wpływ zmian stanów wody na zachowanie się modeli nasypów hydrotechnicznych wykonanych z popioło-żużla

Directory of Open Access Journals (Sweden)

Baran Przemysław

2016-11-01

Full Text Available Celem artykułu była analiza wpływu sposobu piętrzenia wody na zjawiska filtracyjne zachodzące w modelu nasypu wykonanego z popioło-żużla. Model nasypu został uformowany w korycie hydraulicznym w skali półtechnicznej (wysokość 0,6 m, długość w podstawie 2,0 m, szerokość 1,0 m. Badania polegały na obserwacji zachowania się modelu nasypu podczas kontrolowanego piętrzenia i opuszczania wody od strony górnej, dolnej oraz jednocześnie górnej i dolnej. Dodatkowo wykonano badania wybranych parametrów geotechnicznych materiału, który osadził się po stronie dolnej na skutek przelania się wody przez koronę nasypu. W wyniku przeprowadzonych badań i analiz stwierdzono, iż popioło-żużel może być stosowany jako materiał do budowy grobli, gdyż równoczesne piętrzenie i obniżanie wody po obu stronach nasypu nie spowodowało wystąpienia negatywnych skutków filtracji. W przypadku budowli piętrzących tylko z jednej strony badany materiał antropogeniczny wykazuje cechy niestabilne, wymagające zastosowania zabezpieczeń skarp przed negatywnymi skutkami filtracji.

Programowanie żywieniowe - wpływ odżywiania kobiet w ciąży na zdrowie dziecka = Nutritional programming - the impact of nutrition of pregnant women on the health of their children

OpenAIRE

Pudło, Hanna; Respondek, Malwina

2016-01-01

Pudło Hanna, Respondek Malwina. Programowanie żywieniowe - wpływ odżywiania kobiet w ciąży na zdrowie dziecka = Nutritional programming - the impact of nutrition of pregnant women on the health of their children. Journal of Education, Health and Sport. 2016;6(7):589-600. eISSN 2391-8306. DOI http://dx.doi.org/10.5281/zenodo.59761 http://ojs.ukw.edu.pl/index.php/johs/article/view/3733 https://pbn.nauka.gov.pl/sedno-webapp/works/741379 The journal has had 7 points in Min...

Determinants of Work Performance in Workers with Depression and Anxiety: A Cross-Sectional Study

Directory of Open Access Journals (Sweden)

Ivana Ivandic

2017-04-01

Full Text Available Depression and anxiety are highly prevalent disorders with an impact on existential aspects of person’s life, including employment i.e., work performance (WP. In order to develop appropriate strategies, it is essential to identify determinants of WP. The objective of this study was to identify the built, social, attitudinal and health system-related environmental determinants of WP in workers with anxiety or depression in total (N = 1211 and regarding the level of disability. Hierarchical binary logistic regression was performed on data obtained from implementation of the WHO Model Disability Survey (MDS in Chile in 2015. Hindering aspects of means of transportation and workplace, and the use of personal assistance were determinants of WP for all workers with anxiety or depression. Results differed with level of disability. Hindering aspects of means of transportation and workplace, and discrimination were determinants of WP for persons with mild to moderate disability, while hindering aspects of the workplace and dwelling, and the use of personal assistance were determinants of WP for persons with severe disability. Our results emphasize the need for a broader understanding of determinants of WP and the requirement for an integrative approach in developing both universal and specific strategies that go beyond workplace settings.

Determinants of Work Performance in Workers with Depression and Anxiety: A Cross-Sectional Study.

Science.gov (United States)

Ivandic, Ivana; Kamenov, Kaloyan; Rojas, Diego; Cerón, Gloria; Nowak, Dennis; Sabariego, Carla

2017-04-26

Depression and anxiety are highly prevalent disorders with an impact on existential aspects of person's life, including employment i.e., work performance (WP). In order to develop appropriate strategies, it is essential to identify determinants of WP. The objective of this study was to identify the built, social, attitudinal and health system-related environmental determinants of WP in workers with anxiety or depression in total ( N = 1211) and regarding the level of disability. Hierarchical binary logistic regression was performed on data obtained from implementation of the WHO Model Disability Survey (MDS) in Chile in 2015. Hindering aspects of means of transportation and workplace, and the use of personal assistance were determinants of WP for all workers with anxiety or depression. Results differed with level of disability. Hindering aspects of means of transportation and workplace, and discrimination were determinants of WP for persons with mild to moderate disability, while hindering aspects of the workplace and dwelling, and the use of personal assistance were determinants of WP for persons with severe disability. Our results emphasize the need for a broader understanding of determinants of WP and the requirement for an integrative approach in developing both universal and specific strategies that go beyond workplace settings.

Use of Palaeohydrogeology in Radioactive Waste Management

International Nuclear Information System (INIS)

Cortes-Fuiz, A.; Both, A.; Degnan, P.

2005-01-01

PADAMOT (Palaeohydrogeological Data Analysis and Model Testing) is an EC/Euratom 5th Framework RTD programme in nuclear fission safety that began in January 2002 and was completed in December 2004 (Contract Number FIKW-CT-2001- 00129). The consortium of organisations involved in the PADAMOT project comprises: British Geological Survey (UK) Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (Spain) Charles University (Czech Republic) Empresa Nacional de Residuos Radioactivos S.A. (Spain) Intellisci Ltd (UK) Svensk Karnbranslehantering AB (Sweden) Terralogica AB (Sweden) UK Nirex Limited (UK) Universidad Politecnica de Madrid - School of Mines (Spain). University of Edinburgh (UK) PADAMOT built on the outcomes of the preceding 4th Framework project EQUIP (Evidence from Quaternary Infills for Palaeohydrogeology), which developed and evaluated methodologies for obtaining palaeohydrogeological information from secondary calcite mineralisation that formed in fractures in crystalline rocks relatively recently in geological history, i.e. the last 2 million years or so. Recommendations by EQUIP included: (a) further developments of analytical techniques that exploit the rapid advances in instrumental capabilities especially for quantitative microanalysis for trace elements and isotopes for dating, and (b) developing modelling tools to interpret such data quantitatively and to relate this to water- rock reactions at the scale of secondary minerals and also to evolution of the groundwater system at larger scales. It was recognised that more needed to be done to integrate palaeohydrogeological research results into Performance Assessments (PA) for repository siting studies, both generic and site specific. PADAMOT addresses these issues. PADAMOT comprises five work packages (WPs): WP1 Convening a preliminary workshop of PA specialists, PADAMOT researchers and other geoscientists on the use of Palaeohydrogeology in PA. WP2 Making palaeohydrogeological data

Electron density distribution and disordered crystal structure of 8H-SiAlON, Si3−xAl1+xOxN5−x (x∼2.2)

International Nuclear Information System (INIS)

Banno, Hiroki; Asaka, Toru; Fukuda, Koichiro

2014-01-01

The 8H-SiAlON crystal with general formula Si 3−x Al 1+x O x N 5−x was characterized using laboratory X-ray powder diffraction (CuKα 1 ), transmission electron microscopy and energy dispersive X-ray spectroscopy. The [Si: Al] molar ratios were determined to be [0.21(1): 0.79(1)], corresponding to x=2.2(1). The Si 0.8(1) Al 3.2(1) O 2.2(1) N 2.8(1) compound is hexagonal with space group P6 3 /mmc (Z=2). The unit-cell dimensions are a=0.298877(8) nm, c=2.30872(5) nm and V=0.178602(8) nm 3 . The initial structural model was successfully derived by the charge-flipping method and further refined by the Rietveld method. The final structural model showed the positional disordering of two of the three (Si,Al) sites. The maximum-entropy method-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R wp =4.74%, S (=R wp /R e )=1.30, R p =3.40%, R B =1.04% and R F =0.74%. The disordered crystal structure was successfully described by overlapping four types of domains with ordered atom arrangements. The distribution of atomic positions in each of the domains can be achieved in the space group P6 3 mc. Two of the four types of domains are related by a pseudo-symmetry inversion, and the two remaining domains also have each other the inversion pseudo-symmetry. - Graphical abstract: Bird's eye view of electron densities up to 49.3% (0.071 nm −3 ) of the maximum on the plane parallel to (110) with the corresponding atomic arrangements of Si 0.8 Al 3.2 O 2.2 N 2.8 . - Highlights: • Crystal structure of Si 0.8 Al 3.2 O 2.2 N 2.8 is determined by laboratory X-ray powder diffraction. • The atom arrangements are represented by the split-atom model. • The maximum-entropy method-based pattern fitting method is used to confirm the validity of the model. • The disordered structure is described

Up-regulation of Hsp72 and keratin16 mediates wound healing in streptozotocin diabetic rats

Directory of Open Access Journals (Sweden)

Rasha R. Ahmed

2015-01-01

Full Text Available BACKGROUND: Impaired wound healing is a complication of diabetes and a serious problem in clinical practice. We previously found that whey protein (WP was able to regulate wound healing normally in streptozotocin (STZ-dia-betic models. This subsequent study was designed to assess the effect of WP on heat shock protein-72 (Hsp72 and keratin16 (Krt16 expression during wound healing in diabetic rats. METHODS: WP at a dosage of 100 mg/kg of body weight was orally administered daily to wounded normal and STZ-diabetic rats for 8 days. RESULTS: At day 4, the WP-treated diabetic wound was significantly reduced compared to that in the corresponding control. Diabetic wounded rats developed severe inflammatory infiltration and moderate capillary dilatation and regeneration. Treated rats had mild necrotic formation, moderate infiltration, moderate to severe capillary dilatation and regeneration, in addition to moderate epidermal formation. Hsp72 and Krt16 densities showed low and dense activity in diabetic wounded and diabetic wounded treated groups, respectively. At day 8, WP-treatment of diabetic wounded animals revealed great amelioration with complete recovery and closure of the wound. Reactivity of Hsp72 and Krt16 was reversed, showing dense and low, or medium and low, activity in the diabetic wounded and diabetic wounded treated groups, respectively. Hsp72 expression in the pancreas was found to show dense reactivity with WP-treated diabetic wound rats. CONCLUSION: This data provides evidence for the potential impact of WP in the up-regulation of Hsp72 and Krt16 in T1D, resulting in an improved wound healing process in diabetic models.

Optimal monetary policy rules: the problem of stability under heterogeneous learning

Czech Academy of Sciences Publication Activity Database

Bogomolova, Anna; Kolyuzhnov, Dmitri

-, č. 379 (2008), s. 1-34 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : monetary policy rules * New Keynesian model * adaptive learning Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp379.pdf

The implications of structural asymmetries for monetary policy and welfare in a small open economy: a linear quadratic framework

Czech Academy of Sciences Publication Activity Database

Rychalovska, Yuliya

-, č. 380 (2008), s. 1-56 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : DSGE models * non-traded goods * optimal monetary policy Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp380.pdf

Temperature niche shift observed in a Lepidoptera population under allochronic divergence.

Science.gov (United States)

Santos, H; Paiva, M R; Tavares, C; Kerdelhué, C; Branco, M

2011-09-01

A process of adaptive divergence for tolerance to high temperatures was identified using a rare model system, consisting of two sympatric populations of a Lepidoptera (Thaumetopoea pityocampa) with different life cycle timings, a 'mutant' population with summer larval development, Leiria SP, and the founder natural population, having winter larval development, Leiria WP. A third, allopatric population (Bordeaux WP) was also studied. First and second instar larvae were experimentally exposed to daily-cycles of heat treatment reaching maximum values of 36, 38, 40 and 42 °C; control groups placed at 25 °C. A lethal temperature effect was only significant at 42 °C, for Leiria SP, whereas all temperatures tested had a significant negative effect upon Leiria WP, thus indicating an upper threshold of survival c.a. 6 °C above that of the WP. Cox regression model, for pooled heat treatments, predicted mortality hazard to increase for Leiria WP (+108%) and Bordeaux WP (+78%) in contrast to Leiria SP; to increase by 24% for each additional °C; and to decrease by 53% from first to second instar larvae. High variability among individuals was observed, a population characteristic that may favour selection and consequent adaptation. Present findings provide an example of ecological differentiation, following a process of allochronic divergence. Results further contribute to a better understanding of the implications of climate change for ecological genetics. © 2011 The Authors. Journal of Evolutionary Biology © 2011 European Society For Evolutionary Biology.

Formulation and Characterization of Waste Glasses with Varying Processing Temperature

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong-Sang; Schweiger, M. J.; Rodriguez, Carmen P.; Lepry, William C.; Lang, Jesse B.; Crum, Jarrod V.; Vienna, John D.; Johnson, Fabienne; Marra, James C.; Peeler, David K.

2011-10-17

This report documents the preliminary results of glass formulation and characterization accomplished within the finished scope of the EM-31 technology development tasks for WP-4 and WP-5, including WP-4.1.2: Glass Formulation for Next Generation Melter, WP-5.1.2.3: Systematic Glass Studies, and WP-5.1.2.4: Glass Formulation for Specific Wastes. This report also presents the suggested studies for eventual restart of these tasks. The initial glass formulation efforts for the cold crucible induction melter (CCIM), operating at {approx}1200 C, with selected HLW (AZ-101) and LAW (AN-105) successfully developed glasses with significant increase of waste loading compared to that is likely to be achieved based on expected reference WTP formulations. Three glasses formulated for AZ-101HLW and one glass for AN-105 LAW were selected for the initial CCIM demonstration melter tests. Melter tests were not performed within the finished scope of the WP-4.1.2 task. Glass formulations for CCIM were expanded to cover additional HLWs that have high potential to successfully demonstrate the unique advantages of the CCIM technologies based on projected composition of Hanford wastes. However, only the preliminary scoping tests were completed with selected wastes within the finished scope. Advanced glass formulations for the reference WTP melter, operating at {approx}1200 C, were initiated with selected specific wastes to determine the estimated maximum waste loading. The incomplete results from these initial formulation efforts are summarized. For systematic glass studies, a test matrix of 32 high-aluminum glasses was completed based on a new method developed in this study.

Formulation and Characterization of Waste Glasses with Varying Processing Temperature

International Nuclear Information System (INIS)

Kim, Dong-Sang; Schweiger, M.J.; Rodriguez, Carmen P.; Lepry, William C.; Lang, Jesse B.; Crum, Jarrod V.; Vienna, John D.; Johnson, Fabienne; Marra, James C.; Peeler, David K.

2011-01-01

This report documents the preliminary results of glass formulation and characterization accomplished within the finished scope of the EM-31 technology development tasks for WP-4 and WP-5, including WP-4.1.2: Glass Formulation for Next Generation Melter, WP-5.1.2.3: Systematic Glass Studies, and WP-5.1.2.4: Glass Formulation for Specific Wastes. This report also presents the suggested studies for eventual restart of these tasks. The initial glass formulation efforts for the cold crucible induction melter (CCIM), operating at ∼1200 C, with selected HLW (AZ-101) and LAW (AN-105) successfully developed glasses with significant increase of waste loading compared to that is likely to be achieved based on expected reference WTP formulations. Three glasses formulated for AZ-101HLW and one glass for AN-105 LAW were selected for the initial CCIM demonstration melter tests. Melter tests were not performed within the finished scope of the WP-4.1.2 task. Glass formulations for CCIM were expanded to cover additional HLWs that have high potential to successfully demonstrate the unique advantages of the CCIM technologies based on projected composition of Hanford wastes. However, only the preliminary scoping tests were completed with selected wastes within the finished scope. Advanced glass formulations for the reference WTP melter, operating at ∼1200 C, were initiated with selected specific wastes to determine the estimated maximum waste loading. The incomplete results from these initial formulation efforts are summarized. For systematic glass studies, a test matrix of 32 high-aluminum glasses was completed based on a new method developed in this study.

Tropospheric Airborne Meteorological Data Reporting (TAMDAR) Sensor Validation and Verification on National Oceanographic and Atmospheric Administration (NOAA) Lockheed WP-3D Aircraft

Science.gov (United States)

Tsoucalas, George; Daniels, Taumi S.; Zysko, Jan; Anderson, Mark V.; Mulally, Daniel J.

2010-01-01

As part of the National Aeronautics and Space Administration's Aviation Safety and Security Program, the Tropospheric Airborne Meteorological Data Reporting project (TAMDAR) developed a low-cost sensor for aircraft flying in the lower troposphere. This activity was a joint effort with support from Federal Aviation Administration, National Oceanic and Atmospheric Administration, and industry. This paper reports the TAMDAR sensor performance validation and verification, as flown on board NOAA Lockheed WP-3D aircraft. These flight tests were conducted to assess the performance of the TAMDAR sensor for measurements of temperature, relative humidity, and wind parameters. The ultimate goal was to develop a small low-cost sensor, collect useful meteorological data, downlink the data in near real time, and use the data to improve weather forecasts. The envisioned system will initially be used on regional and package carrier aircraft. The ultimate users of the data are National Centers for Environmental Prediction forecast modelers. Other users include air traffic controllers, flight service stations, and airline weather centers. NASA worked with an industry partner to develop the sensor. Prototype sensors were subjected to numerous tests in ground and flight facilities. As a result of these earlier tests, many design improvements were made to the sensor. The results of tests on a final version of the sensor are the subject of this report. The sensor is capable of measuring temperature, relative humidity, pressure, and icing. It can compute pressure altitude, indicated air speed, true air speed, ice presence, wind speed and direction, and eddy dissipation rate. Summary results from the flight test are presented along with corroborative data from aircraft instruments.

Variable Saline Concentrations for Initial Resuscitation Following Polytrauma

Science.gov (United States)

2017-02-22

AFRL-SA-WP-TR-2017-0008 Variable Saline Concentrations for Initial Resuscitation Following Polytrauma Dr. Michael Goodman...Following Polytrauma 5a. CONTRACT NUMBER FA8650-10-2-6140 5b. GRANT NUMBER FA8650-14-2-6B29 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Dr. Michael...established. We investigated the utility of standard variable saline concentrations (0.9%, 3%, 23.4%) in a murine polytrauma model of traumatic brain injury

4,4',5'-trimethyl-8-azapsoralen, a new-photoreactive and non-skin-phototoxic bifunctional bioisoster of psoralen.

Science.gov (United States)

Vedaldi, D; Dall'Acqua, F; Caffieri, S; Baccichetti, F; Carlassare, F; Bordin, F; Chilin, A; Guiotto, A

1991-01-01

Photochemical and photobiological properties of a new isoster of psoralen, 4,4',5'-trimethyl-8-azapsoralen (4,4',5'-TMAP), have been studied. This compound shows a high DNA-photobinding rate, higher than that of 8-methoxypsoralen (8-MOP), forming both monoadducts and inter-strand cross-links. The yield of cross-links, however, is markedly lower than that of 8-MOP. Antiproliferative activity of 4,4',5'-TMAP, in terms of DNA synthesis inhibition in Ehrlich ascites tumor cells, is higher than that of 8-MOP. Mutagenic activity on E. coli WP2 R46+ cells appeared similar to or even lower than that of 8-MOP. This new compound applied on depilated guinea pig skin and irradiated with UVA did not show any skin-phototoxicity. On the basis of these properties 4,4',5'-TMAP appears to be a potential photochemotherapeutic agent.

Seawater pumped storage systems and offshore wind parks in islands with low onshore wind potential. A fundamental case study

International Nuclear Information System (INIS)

Katsaprakakis, Dimitris Al.; Christakis, Dimitris G.

2014-01-01

The scope of this article is to investigate the effects of introducing a WP-PSS (Wind Powered Pumped Storage System) in isolated electricity systems assuming unfavourable conditions such as low onshore wind potential and low PSS head height. These disadvantages can be compensated with the installation of offshore wind parks, larger reservoirs and double penstocks to allow simultaneous water fall and pumping using pipes of the greatest diameter that are currently commercially available. With the above modifications, the energy efficiency of the WP-PSS improves while the installation costs rise. A new operation algorithm for the WP-PSS is created to fully utilize the capacity of the double penstock and ultimately maximise wind energy penetration. A case study for a WP-PSS on the island of Rhodes is presented in this paper. Despite unfavourable conditions, the WP-PSS model leads to the following results: • Annual wind energy penetration exceeds 50% of the annual electricity consumption. • The WP-PSS exhibits attractive financial induces without including any subsidies. The WP-PSS presented in this paper proved to be technically and economically feasible and revealed that WP-PSSs are a guaranteed choice for large scale penetration of R.E.S. in electrical systems. - Highlights: • Offshore wind parks (WPs) and seawater PSS can guarantee power production in autonomous systems. • The examined system is proved technically and economically feasible under unfavourable conditions. • A new operational algorithm is developed to maximise the wind energy penetration. • The annual wind energy penetration exceeds 50%. The economic indexes are acceptable. • The WP-PSS is a guaranteed choice for wind energy penetration maximisation

Deliverable 1.2 Specification of industrial benchmark tests

DEFF Research Database (Denmark)

Arentoft, Mogens; Ravn, Bjarne Gottlieb

Technical report for the Growth project: IMPRESS, Improvement of precision in forming by simultaneous modelling of deflections in workpiece-die-press system - Output from WP1: Numerical simulation of deflections in workpiece-die-press system.......Technical report for the Growth project: IMPRESS, Improvement of precision in forming by simultaneous modelling of deflections in workpiece-die-press system - Output from WP1: Numerical simulation of deflections in workpiece-die-press system....

Energy efficiency and behaviour

DEFF Research Database (Denmark)

Carstensen, Trine Agervig; Kunnasvirta, Annika; Kiviluoto, Katariina

separate key aspects hinders strategic energy efficiency planning. For this reason, the PLEEC project – “Planning for Energy Efficient Cities” – funded by the EU Seventh Framework Programme uses an integrative approach to achieve the sus‐ tainable, energy– efficient, smart city. By coordinating strategies...... to conduct behavioural interventions, to be presented in Deliverable 5.5., the final report. This report will also provide valuable information for the WP6 general model for an Energy-Smart City. Altogether 38 behavioural interventions are analysed in this report. Each collected and analysed case study...... of the European Union’s 20‐20‐20 plan is to improve energy efficiency by 20% in 2020. However, holistic knowledge about energy efficiency potentials in cities is far from complete. Currently, a WP4 location in PLEEC project page 3 variety of individual strategies and approaches by different stakeholders tackling...

Low dose radiation effects: an integrative european approach (Risc-Rad Project) coordinated by the Cea

International Nuclear Information System (INIS)

Sabatier, L.

2006-01-01

IR and of the impact of the major defence pathways (DNA repair, cell cycle checkpoints, apoptosis) on radiation induced damage and radiosensitivity. Chromosomal abnormalities and gene mutations induced by IR are thought to be transmitted to future cell generations. The topic of WP2 is to characterize the delayed and epigenetic effects of IR in the progeny of irradiated cells and in non-irradiated neighbourhood. A major challenge is to understand the interplay between cellular ageing and genomic instability in the progeny of irradiated cells. WP3 overall objective is to obtain a more precise description of the temporal sequence of genetic and epigenetic events which underlie radiation carcinogenesis in skin, intestine, bone, lung and the haematopoietic system. Using animal model systems, these studies aim to provide quantitative information on the events leading to radiation induced cancer. In this regard, very early stage pre-neoplastic lesions need to be studied. WP4 aims to provide a biological basis for the inclusion of molecular genetic parameters in models of low dose radiation risk. In order to more accurately reflect the genetic component of risk WP4 has initiated experiments designed to identify the genes that modify individual susceptibility. The work of WP4 is designed to exploit animal models of radiation carcinogenesis as a tool for the discovery of critical modifier genes. Contributing to the project's objectives, WP5 utilizes other WP experimental results to provide models aimed at improving quantitative risk assessment of the effects of low doses. (author)

The Effect of Whey Protein Supplementation on the Temporal Recovery of Muscle Function Following Resistance Training: A Systematic Review and Meta-Analysis

Directory of Open Access Journals (Sweden)

Robert W. Davies

2018-02-01

Full Text Available Whey protein (WP is a widely consumed nutritional supplement, known to enhance strength and muscle mass during resistance training (RT regimens. Muscle protein anabolism is acutely elevated following RT, which is further enhanced by WP. As a result, there is reason to suggest that WP supplementation may be an effective nutritional strategy for restoring the acute loss of contractile function that occurs following strenuous RT. This systematic review and meta-analysis provides a synthesis of the literature to date, investigating the effect of WP supplementation on the recovery of contractile function in young, healthy adults. Eight studies, containing 13 randomised control trials (RCTs were included in this review and meta-analysis, from which individual standardised effect sizes (ESs were calculated, and a temporal overall ES was determined using a random-effects model. Whilst only half of the individual studies reported beneficial effects for WP, the high-quality evidence taken from the 13 RCTs was meta-analysed, yielding overall positive small to medium effects for WP from < 24 to 96 h (ES range = 0.4 to 0.7, for the temporal restoration of contractile function compared to the control treatment. Whilst the effects for WP were shown to be consistent over time, these results are limited to 13 RCTs, principally supporting the requirement for further comprehensive research in this area.

Energy modeling and economic optimization of a hybrid wind/photovoltaic system coupled with the grid and associated to an accumulator

International Nuclear Information System (INIS)

Gergaud, Olivier

2002-01-01

This thesis deals of the production of photovoltaic and wind electricity connected to the grid and having a storage. The principal interests of such a system are the clean production on the place of consumption, the mutualization of resources and energy storage, and the security of supply. Models are developed and compared successfully with reality thanks to an experimental device instrumented completion (2 kWp PV, 2 x 750 Wp wind generators, 15 kWh lead-acid battery). We obtain then a model that proves both accurate enough to distinguish energy transfers and fast enough to enable optimizing the sizing and handling of the system's energy transfers. Having energy, economic models and tools of dimensioning and management, we carried out a study of optimization based on simple cases of systems multi-production. To tackle this difficult problem, we then placed ourselves within the framework of a producer-consumer whose conditions weather with the site of production as its own consumption are supposed to be known, therefore deterministic. The problems were then the search for strategies of management of flows of energy and the fundamental characteristics of the elements of the installation optimal allowing the minimization of the energy cost. (author) [fr

CFD evaluation of turbulence model on heat transfer in 5 × 5 rod bundles

International Nuclear Information System (INIS)

Chao Yanmeng; Yang Lixin; Zhang Yuxiang; Pang Zhengzheng

2014-01-01

Different turbulence models may lead to different results when analyzing fuel assemblies using computational fluid dynamics (CFD) method. In this paper, a 5 × 5 rod bundle model was built to analyze the relationship between flow and heat transfer. The pressure drop and Nu were calculated using ANSYS CFX. Three factors evaluating swirling flow and cross-flow were used to analyze the inner relationship between flow field and heat transfer. The performances of various turbulence models, including eddy viscosity model and Reynold stress model, were evaluated. The comparison between numerical and similar experimental results indicates that Reynold stress model is more appropriate for modeling flow features and heat transfer in spacer grids discussed in this paper. (authors)

Weather hazards and vulnerabilities for the European transport system - a risk panorama. EWENT project D5.1

Energy Technology Data Exchange (ETDEWEB)

Molarius, R.; Leviakangas, P.; Ronty, J.; Oiva, K. (eds.)

2012-09-15

This deliverable of EWENT project estimates the risks of extreme weather on European transport system. The main object of work package 5 in EWENT project was to perform a risk analysis based on impact and probability assessments carried out in earlier work packages (WP2-WP3). The results of WP 5 can be used as a starting point when deciding on the risk reduction measures, strategies and policies in the European Union. This deliverable also serves as a background material for the synthesis report (named shortly as Risk Panorama), which will summarise the findings of risk assessment and previous work packages. The methodological approach of EWENT is based on the generic risk management standard (IEC 60300-3-9) and starts with the identification of hazardous extreme weather phenomena, followed by an impact assessment and concluded by mitigation and risk control measures. This report pools the information from EWENT's earlier work packages, such as risk identification and estimation, into a 'risk panorama' and provides a holistic picture on the risks of extreme weather in different parts of Europe and EU transport network. The risk assessment is based on the definition of transport systems' vulnerability to extreme weather events in different countries and on calculations of the most probable causal chains, starting from adverse weather phenomena and ending up with events that pose harmful consequences to the transport systems in different climate regions. The latter part, the probabilistic section, is the hazard analysis. The vulnerability of a particular mode in a particular country is a function of exposure (indicated by transport or freight volumes and population density), susceptibility (infrastructure quality index, indicating overall resilience) and coping capacity (measured by GDP per capita). Hence, we define the extreme weather risk as Risk = hazard times vulnerability = P(negative consequences) times V[f(exposure, susceptibility, coping

Size and value effects in the Visegrad countries

Czech Academy of Sciences Publication Activity Database

Morgese Borys, M.; Zemčík, Petr

-, č. 391 (2009), s. 1-28 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:MSM0021620846 Keywords : regional asset pricing model * book-to- market value effects * Visegrad countries * cost of capital Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp391.pdf

Wpływ Rafy Żoliborskiej na warunki przepływu na śródmiejskim odcinku Wisły w Warszawie (km 508–518

Directory of Open Access Journals (Sweden)

Anna Sosnowska

2015-03-01

Full Text Available W artykule omówiono wyniki obliczeń położenia zwierciadła wody na warszawskim odcinku Wisły w oparciu o pomiary geodezyjne. Pozwoliły one na utworzenie modelu rozpatrywanego odcinka Wisły dla przepływu ustalonego w programie HEC-RAS (wersja 4.1.0, za pomocą którego przeprowadzono symulacje różnych warunków przepływu. Na podstawie otrzymanych wyników symulacji podjęto próbę określenia znaczenia Rafy Żoliborskiej dla śródmiejskiego odcinka Wisły w Warszawie. Analiza wykazała, że jest ona ważnym elementem w profilu podłużnym rzeki i ma wpływ na poziom zwierciadła wody w warszawskiej Wiśle.

Structure of La2Cu2O5 by high-resolution synchrotron X-ray powder diffraction

International Nuclear Information System (INIS)

La Placa, S.J.; Bringley, J.F.; Scott, B.A.; Cox, D.E.

1993-01-01

Dicopper(II) dilanthanum pentaoxide, La 2 Cu 2 O 5 , M r =484.90, orthorhombic, Pbam. At T=300 K: a=5.5490(1), b=10.4774(2), c=3.8796(1) A, V=225.557(8) A 3 , Z=2, D x =7.139 g cm -3 , λ=1.2000 A. Final R I =6.20, R p =14.6 and R wp =20.61%, 124 independent reflections observed. The structure has been refined from high-resolution synchrotron X-ray powder diffraction data using the Rietveld method. It is of the oxygen-defect perovskite type and is composed entirely of corner-shared CuO 5 square pyramids, which share oxygen vacancies forming vacancy tunnels along the c axis. The La atoms reside at a perovskite-like A-site and are tenfold coordinated by oxygen. (orig.)

Evaluation of the effects of mulch on optimum sowing date and irrigation management of zero till wheat in central Punjab, India using APSIM.

Science.gov (United States)

Balwinder-Singh; Humphreys, E; Gaydon, D S; Eberbach, P L

2016-10-01

Machinery for sowing wheat directly into rice residues has become more common in the rice-wheat systems of the north-west Indo-Gangetic Plains of South Asia, with increasing numbers of farmers now potentially able to access the benefits of residue retention. However, surface residue retention affects soil water and temperature dynamics, thus the optimum sowing date and irrigation management for a mulched crop may vary from those of a traditional non-mulched crop. Furthermore, the effects of sowing date and irrigation management are likely to vary with soil type and seasonal conditions. Therefore, a simulation study was conducted using the APSIM model and 40 years of weather data to evaluate the effects of mulch, sowing date and irrigation management and their interactions on wheat grain yield, irrigation requirement (I) and water productivity with respect to irrigation (WP I ) and evapotranspiration (WP ET ). The results suggest that the optimum wheat sowing date in central Punjab depends on both soil type and the presence or absence of mulch. On the sandy loam, with irrigation scheduled at 50% soil water deficit (SWD), the optimum sowing date was late October to early November for maximising yield, WP I and WP ET . On the clay loam, the optimum date was about one week later. The effect of mulch on yield varied with seasonal conditions and sowing date. With irrigation at 50% SWD, mulching of wheat sown at the optimum time increased average yield by up to 0.5 t ha -1 . The beneficial effect of mulch on yield increased to averages of 1.2-1.3 t ha -1 as sowing was advanced to 15 October. With irrigation at 50% SWD and 7 November sowing, mulch reduced the number of irrigations by one in almost 50% of years, a reduction of about 50 mm on the sandy loam and 60 mm on the clay loam. The reduction in irrigation amount was mainly due to reduced soil evaporation. Mulch reduced irrigation requirement by more as sowing was delayed, more so on the sandy loam than the clay

Projections of Rainfall and Surface Temperature from CMIP5 Models under RCP4.5 and 8.5 over BIMSTEC Countries

Science.gov (United States)

Charan Pattnayak, Kanhu; Kar, Sarat Chandra; Kumari Pattnayak, Rashmita

2015-04-01

Rainfall and surface temperature are the most important climatic variables in the context of climate change. Thus, these variables simulated from fifth phase of the Climate Model Inter-comparison Project (CMIP5) models have been compared against Climatic Research Unit (CRU) observed data and projected for the twenty first century under the Representative Concentration Pathways (RCPs) 4.5 and 8.5 emission scenarios. Results for the seven countries under Bay of Bengal Initiative for Multi-Sectoral Technical and Economic Cooperation (BIMSTEC) such as Bangladesh, Bhutan, India, Myanmar, Nepal, Sri Lanka and Thailand have been examined. Six CMIP5 models namely GFDL-CM3, GFDL-ESM2M, GFDL-ESM2G, HadGEM2-AO, HadGEM2-CC and HadGEM2-ES have been chosen for this study. The study period has been considered is from 1861 to 2100. From this period, initial 145 years i.e. 1861 to 2005 is reference or historical period and the later 95 years i.e. 2005 to 2100 is projected period. The climate change in the projected period has been examined with respect to the reference period. In order to validate the models, the mean annual rainfall and temperature has been compared with CRU over the reference period 1901 to 2005. Comparison reveals that most of the models are able to capture the spatial distribution of rainfall and temperature over most of the regions of BIMSTEC countries. Therefore these model data can be used to study the future changes in the 21st Century. Four out six models shows that the rainfall over Central and North India, Thailand and eastern part of Myanmar shows decreasing trend and Bangladesh, Bhutan, Nepal and Sri Lanka shows an increasing trend in both RCP 4.5 and 8.5 scenarios. In case of temperature, all of the models show an increasing trend over all the BIMSTEC countries in both scenarios, however, the rate of increase is relatively less over Sri Lanka than the other countries. Annual cycles of rainfall and temperature over Bangladesh, Myanmar and Thailand

Phase II randomized clinical trial evaluating neoadjuvant chemotherapy regimens with weekly paclitaxel or eribulin followed by doxorubicin and cyclophosphamide in women with locally advanced HER2-negative breast cancer: NSABP Foundation Study FB-9.

Science.gov (United States)

Abraham, Jame; Robidoux, André; Tan, Antoinette R; Limentani, Steven; Sturtz, Keren; Shalaby, Ibrahim; Alcorn, Hope; Buyse, Marc E; Wolmark, Norman; Jacobs, Samuel A

2015-07-01

Locally advanced breast cancer (LABC) is a good setting in which to monitor response to neoadjuvant chemotherapy, to downsize the tumor (which facilitates breast-conserving surgery), and to test newer agents in untreated patients. Eribulin (E) has shown activity in patients who have undergone previous taxane, anthracycline, and capecitabine treatment. We aimed to evaluate the neoadjuvant use of E followed by doxorubicin and cyclophosphamide (AC) in patients with HER2-negative LABC, using as a control a randomized group of women who received weekly paclitaxel (WP). Fifty women with LABC were accrued January-August 2013. Patients were randomized (1:2) to receive either WP (N = 19) for 12 treatments or E (N = 31) every 3 weeks for 4 cycles followed by AC every 3 weeks for 4 cycles before surgery. 17/19 patients who took WP and 25/30 who took E completed all cycles. Patients were evaluated by clinical examination and breast MRI at baseline and after completion of E or WP. Surgical pCR in breast and lymph nodes was determined by a local pathologist following chemotherapy. Forty-nine patients received ≥1 dose of neoadjuvant chemotherapy and are included in this analysis. Forty-eight underwent surgery; one had disease that was inoperable (on E) and is included as no-pCR patient. 17/19 of these patients who took WP completed 12 doses; 28/30 on E completed 4 cycles. Six discontinued treatment on WP, E, or AC. Both treatments were well tolerated. pCR on WP = 5/19(26 %) and on E = 5/30(17 %). Both regimens were equally well tolerated with no unexpected toxicities. pCR did not suggest higher activity with E than with other standard regimens in these LABC patients.

Tank 5 Model for Sludge Removal Analysis

International Nuclear Information System (INIS)

LEE, SI

2004-01-01

Computational fluid dynamics methods have been used to develop and provide slurry pump operational guidance for sludge heel removal in Tank 5. Flow patterns calculated by the model were used to evaluate the performance of various combinations of operating pumps and their orientation under steady-state indexed and transient oscillation modes. A model used for previous analyses has been updated to add the valve housing distribution piping and pipe clusters of the cooling coil supply system near pump no. 8 to the previous tank Type-I model. In addition, the updated model included twelve concrete support columns. This model would provide a more accurate assessment of sludge removal capabilities. The model focused on removal of the sludge heel located near the wall of Tank 5 using the two new slurry pumps. The models and calculations were based on prototypic tank geometry and expected normal operating conditions as defined by Tank Closure Project Engineering. Computational fluid dynamics models of Tank 5 with different operating conditions were developed using the FLUENT (trademark) code. The modeling results were used to assess the efficiency of sludge suspension and removal operations in the 75-ft tank. The models employed a three-dimensional approach, a two-equation turbulence model, and an approximate representation of flow obstructions. The calculated local velocity was used as a measure of sludge removal and mixing capability. For the simulations, modeling calculations were performed with indexed pump orientations until an optimum flow pattern near the potential location of the sludge heel was established for sludge removal. The calculated results demonstrated that the existing slurry pumps running at 3801 gpm flowrate per nozzle could remove the sludge from the tank with a 101 in liquid level, based on a historical minimum sludge suspension velocity of 2.27 ft/sec. The only exception is the region within maximum 4.5 ft distance from the tank wall boundary at the

Glucose-lowering effect of whey protein depends upon clinical characteristics of patients with type 2 diabetes.

Science.gov (United States)

Almario, Rogelio U; Buchan, Wendy M; Rocke, David M; Karakas, Sidika E

2017-01-01

Whey protein (WP) intake has been shown to reduce postprandial glycemia. Majority of WP research in type 2 diabetes (T2DM) involved acute challenge or weight loss studies. It is not known if WP supplementation can provide sustained glucose lowering. Our goal was to investigate the effects of WP on glycemia comprehensively by using continuous glucose monitoring (CGM) while avoiding the confounding effects of variable food intake through controlled feeding. This double-blinded and placebo (PL)-controlled study included 22 patients with T2DM patients (11 male, 11 female; age 57.1±12.6 years) on diet or metformin monotherapy. First, one serving (21 g) of WP was compared with PL in parallel-armed acute challenge studies. Next, in a crossover design, each patient underwent CGM twice, over 2 consecutive weeks, 3.5 days each week. Identical diets were provided by the study during both CGM periods. During the first CGM, one serving of either WP or PL was consumed before breakfast and another before dinner. During the second CGM, participants switched to the alternate supplement. Order of the supplements was randomized. During acute challenge studies, WP stimulated insulin and glucagon-like peptide (GLP)-1 secretion; suppressed ghrelin (all pObesity, hypertriglyceridemia and high fasting GLP-1 concentrations predicted increased glucose levels. Effects of WP supplementation on glycemia in T2DM depend on the baseline characteristics. Lower body weight, normal triglyceride and lower GLP-1 levels predict glucose lowering. In contrast, obesity, hypertriglyceridemia and high baseline GLP-1 predict increased glucose response.

Deliverable 1.1 Spec. of industrial problems

DEFF Research Database (Denmark)

Arentoft, Mogens; Ravn, Bjarne Gottlieb

Technical report for the Growth roject: IMPRESS, Improvement of precision in formong by simultaneous modelling of deflections in workpiece-die-press system -IMPRESS Output from WP1: Numerical simulation of deflections in workpiece-die-press system......Technical report for the Growth roject: IMPRESS, Improvement of precision in formong by simultaneous modelling of deflections in workpiece-die-press system -IMPRESS Output from WP1: Numerical simulation of deflections in workpiece-die-press system...

List of working papers

International Nuclear Information System (INIS)

2001-01-01

The following working papers are included in this report. The other papers, or the memos of which they consist, are available from the IAEA Nuclear Data Section. WP2001-2 Inventory of TRANS files exchanged since the last meeting; WP2001-4 Data headings and units for wavelength and kT; WP2001-6 Proposed Polarization Quantities; WP2001-7 Correlation / Angular correlation: Clarifications and dictionary cleanup; WP2001-8 Proposed quantity PAR/M-,DA,G; WP2001-14 Units N/PART/SR etc. for Dict. 25; WP2001-15 Coding of differential neutron multiplicity distributions; WP2001-16 Headings E-LVL-INI, E-LVL-FIN as 'additional information'; WP2001-17 Dictionary sorting flags and wildcards; WP2001-18 IAEA/NDS priorities in the EXFOR compilation; WP2001-21 CSISRS Library Statistics (NNDC); WP2001-23 CINDA-2001 Manual (24 May 2001); WP2001-24 Correspondence of quantity codes for CINDA-2001; WP2001-25 EXFOR as a multi-platform relational database: current status of development; WP2001-26 Compilation and Evaluation of Alpha-Induced Nuclear Reaction Cross Sections for Astrophysics; WP2001-28 Journal coverage for CINDA

List of working papers

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The following working papers are included in this report. The other papers, or the memos of which they consist, are available from the IAEA Nuclear Data Section. WP2001-2 Inventory of TRANS files exchanged since the last meeting; WP2001-4 Data headings and units for wavelength and kT; WP2001-6 Proposed Polarization Quantities; WP2001-7 Correlation / Angular correlation: Clarifications and dictionary cleanup; WP2001-8 Proposed quantity PAR/M-,DA,G; WP2001-14 Units N/PART/SR etc. for Dict. 25; WP2001-15 Coding of differential neutron multiplicity distributions; WP2001-16 Headings E-LVL-INI, E-LVL-FIN as 'additional information'; WP2001-17 Dictionary sorting flags and wildcards; WP2001-18 IAEA/NDS priorities in the EXFOR compilation; WP2001-21 CSISRS Library Statistics (NNDC); WP2001-23 CINDA-2001 Manual (24 May 2001); WP2001-24 Correspondence of quantity codes for CINDA-2001; WP2001-25 EXFOR as a multi-platform relational database: current status of development; WP2001-26 Compilation and Evaluation of Alpha-Induced Nuclear Reaction Cross Sections for Astrophysics; WP2001-28 Journal coverage for CINDA.

Dynamic Modelling of a Solar Water Pumping System with Energy Storage

OpenAIRE

Shatadru Biswas; M. Tariq Iqbal

2018-01-01

This paper describes the dynamic modelling of a system used for extraction of groundwater for irrigation using an alternative source of energy. The system is designed based on data of an existing project in Lalmonirhat, Bangladesh. The system comprises a 38.4 kWp solar photovoltaic array, inverter, AC motor, and pump set, which can discharge a maximum of 1,930 m3 of water per day. MATLAB simulation is performed with two types of energy storage system: (i) electric energy using a battery bank ...

Size and value efects in the Visegrad countries

Czech Academy of Sciences Publication Activity Database

Morgese Borys, Magdalena; Zemčík, P.

-, č. 391 (2009), s. 1-28 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : regional asset pricing model * book-to- market value effects * Visegrad countries * cost of capital Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp391.pdf

Validation of the STAFF-5 computer model

International Nuclear Information System (INIS)

Fletcher, J.F.; Fields, S.R.

1981-04-01

STAFF-5 is a dynamic heat-transfer-fluid-flow stress model designed for computerized prediction of the temperature-stress performance of spent LWR fuel assemblies under storage/disposal conditions. Validation of the temperature calculating abilities of this model was performed by comparing temperature calculations under specified conditions to experimental data from the Engine Maintenance and Dissassembly (EMAD) Fuel Temperature Test Facility and to calculations performed by Battelle Pacific Northwest Laboratory (PNL) using the HYDRA-1 model. The comparisons confirmed the ability of STAFF-5 to calculate representative fuel temperatures over a considerable range of conditions, as a first step in the evaluation and prediction of fuel temperature-stress performance

Report on the model developments in the sectoral assessments

DEFF Research Database (Denmark)

Iglesias, Ana; Termansen, Mette; Bouwer, Laurens

2014-01-01

into the economic assessments. At the same time, the models will link to the case studies in two ways. First, they use the data in the case studies for model validation and then they provide information to inform stakeholders on adaptation strategies. Therefore, Deliverable 3.2 aims to address three main questions......The Objective of this Deliverable D3.2 is to describe the models developed in BASE that is, the experimental setup for the sectoral modelling. The model development described in this deliverable will then be implemented in the adaptation and economic analysis in WP6 in order to integrate adaptation......: How to address climate adaptation options with the sectoral bottom-up models? - This includes a quantification of the costs of adaptation with the sectoral models, in monetary terms or in other measures of costs. The benefits in this framework will be the avoided damages, therefore a measure...

Overview of magnet design options: Deliverable D5.1

CERN Document Server

AUTHOR|(CDS)2069265; Toral, Fernando

2016-01-01

This document describes the design options for 16 T superconducting dipole magnets for the FCC hadron collider explored in the frame of the activities of WP5. All options have been considered under comparable assumptions and managed using the same tools to ensure a correct judgement and comparison of their relevant pros and cons. Three baseline design configurations have been explored: 1) block-coils, 2) cosine-theta and 3) common-coils. A fourth option, the canted cosine-theta, has been initiated by Swiss (PSI, not part of EuroCirCol) and US (LBNL, EuroCirCol partner) laboratories. The studies show that, adopting a reference margin to the load line of 14 % and with reasonable assumptions on the conductor performance, the total amount of conductor needed for the entire collider is between 7.5 and 10 ktons. depending on the option. The cosine-theta uses less conductor and the canted cosine-theta uses the largest amount. The characterisation of the magnet design options is complete and the work to finalize and ...

Results of the AVATAR project for the validation of 2D aerodynamic models with experimental data of the DU95W180 airfoil with unsteady flap

DEFF Research Database (Denmark)

Ferreira, C.; Gonzalez, A.; Baldacchino, D.

2016-01-01

, for different angle of attack and flap settings, including unsteady oscillatory trailing-edge-flap motion, carried out within the framework of WP3: Models for Flow Devices and Flow Control, Task 3.1: CFD and Experimental Database. The aerodynamics codes are: AdaptFoil2D, Foil2W, FLOWer, MaPFlow, OpenFOAM, Q3UIC...

An Ecosystem Model for the Simulation of Physical and Biological Oceanic Processes-IDAPAK User's Guide and Applications

Science.gov (United States)

McClain, Charles R.; Arrigo, Kevin; Murtugudde, Ragu; Signorini, Sergio R.; Tai, King-Sheng

1998-01-01

This TM describes the development, testing, and application of a 4-component (phytoplankton, zooplankton, nitrate, and ammonium) ecosystem model capable of simulating oceanic biological processes. It also reports and documents an in-house software package (Interactive Data Analysis Package - IDAPAK) for interactive data analysis of geophysical fields, including those related to the forcing, verification, and analysis of the ecosystem model. Two regions were studied in the Pacific: the Warm Pool (WP) in the Equatorial Pacific (165 deg. E at the equator) and at Ocean Weather Station P (OWS P) in the Northeast Pacific (50 deg. N, 145 deg. W). The WP results clearly indicate that the upwelling at 100 meters correlates well with surface blooms. The upwelling events in late 1987 and 1990 produced dramatic increases in the surface layer values of all 4 ecosystem components, whereas the spring-summer deep mixing events, do not seem to incur a significant response in any of the ecosystem quantities. The OWS P results show that the monthly profiles of temperature, the annual cycles of solar irradiance, and 0- to 50-m integrated nitrate accurately reproduce observed values. Annual primary production is 190 gC/m(exp 2)/yr, which is consistent with recent observations but is much greater than earlier estimates.

Sadhana | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Sadhana. W-P Sung. Articles written in Sadhana. Volume 34 Issue 3 June 2009 pp 421-437. A model for signal processing and predictive control of semi-active structural control system · M-H Shih W-P Sung Ching-Jong Wang · More Details Abstract Fulltext PDF. The theory for structural control has been ...

Project report: Experimental planning and verification of working fluids (WP 5)

DEFF Research Database (Denmark)

Babi, Deenesh Kavi

working fluid candidates a database is required that can be simultaneously searched in order to differentiate and determine whether the generated candidates are existing or novel. Also, the next step upon selection of the candidates is performing experiments in order to test and verify the generated...... working fluids. If performed properly, the experimental step is solely verification. Experiments can either be performed virtually (in order to further reduce the number of required experiments) and/or physically. Therefore the objective of this work was the development of a database of existing working......Computer-aided molecular design (CAMD) helps in the reduction of experiments for the selection/design of optimal working fluids. In reducing the number of experiments, solutions obtain by trial and error is replaced by solutions that are based on mixture-process properties. In generating optimal...

Multiscale Micromechanical Modeling of Polymer/Clay Nanocomposites and the Effective Clay Particle

Science.gov (United States)

Sheng, Nuo; Boyce, Mary C.; Parks, David M.; Manovitch, Oleg; Rutledge, Gregory C.; Lee, Hojun; McKinley, Gareth H.

2003-03-01

Polymer/clay nanocomposites have been observed to exhibit enhanced mechanical properties at low weight fractions (Wp) of clay. Continuum-based composite modeling reveals that the enhanced properties are strongly dependent on particular features of the second-phase ¡°particles¡+/-; in particular, the particle volume fraction (fp), the particle aspect ratio (L/t), and the ratio of particle mechanical properties to those of the matrix. However, these important aspects of as-processed nanoclay composites have yet to be consistently and accurately defined. A multiscale modeling strategy was developed to account for the hierarchical morphology of the nanocomposite: at a lengthscale of thousands of microns, the structure is one of high aspect ratio particles within a matrix; at the lengthscale of microns, the clay particle structure is either (a) exfoliated clay sheets of nanometer level thickness or (b) stacks of parallel clay sheets separated from one another by interlayer galleries of nanometer level height. Here, quantitative structural parameters extracted from XRD patterns and TEM micrographs are used to determine geometric features of the as-processed clay ¡°particles¡+/-, including L/t and the ratio of fp to Wp. These geometric features, together with estimates of silicate lamina stiffness obtained from molecular dynamics simulations, provide a basis for modeling effective mechanical properties of the clay particle. The structure-based predictions of the macroscopic elastic modulus of the nanocomposite as a function of clay weight fraction are in excellent agreement with experimental data. The adopted methodology offers promise for study of related properties in polymer/clay nanocomposites.

Modeling study on the flow patterns of gas-liquid flow for fast decarburization during the RH process

Science.gov (United States)

Li, Yi-hong; Bao, Yan-ping; Wang, Rui; Ma, Li-feng; Liu, Jian-sheng

2018-02-01

A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained during the practical RH process. There are three flow patterns with different bubbling characteristics and steel surface states in the vacuum chamber: boiling pattern (BP), transition pattern (TP), and wave pattern (WP). The effect of the liquid-steel level and the residence time of the steel in the chamber on flow patterns and decarburization reaction were investigated, respectively. The liquid-steel level significantly affected the flow-pattern transition from BP to WP, and the residence time and reaction area were crucial to evaluate the whole decarburization process rather than the circulation flow rate and mixing time. A superior flow-pattern map during the practical RH process showed that the steel flow pattern changed from BP to TP quickly, and then remained as TP until the end of decarburization.

Asymptotically free SU(5) models

International Nuclear Information System (INIS)

Kogan, Ya.I.; Ter-Martirosyan, K.A.; Zhelonkin, A.V.

1981-01-01

The behaviour of Yukawa and Higgs effective charges of the minimal SU(5) unification model is investigated. The model includes ν=3 (or more, up to ν=7) generations of quarks and leptons and, in addition, the 24-plet of heavy fermions. A number of solutions of the renorm-group equations are found, which reproduce the known data about quarks and leptons and, due to a special choice of the coupling constants at the unification point are asymptotically free in all charges. The requirement of the asymptotical freedom leads to some restrictions on the masses of particles and on their mixing angles [ru

Studies on the cost-effective management of Alternaria blight of rapeseed-mustard (Brassica spp.

Directory of Open Access Journals (Sweden)

M.M. Khan

2007-08-01

Full Text Available Three systemic fungicides: Topsin-M (Thiophanate methyl, 70%WP, Ridomil MZ (Mancozeb, 64% + Metalaxyl, 8%WP, and Bavistin (Carbendazim, 50%WP alone and in combination with four non-systemic fungicides Captaf (Captan, 50%WP, Indofil M-45 (Mancozeb, 75%WP, Indofil Z-78 (Zineb, 75%WP, and Thiram (Thiram, 75%WP were evaluated both in vitro and in vivo for their effectiveness to manage Alternaria blight of rapeseedmustard caused by Alternaria brassicae. A pure culture of the pathogenic fungus was applied in the field at 2 g colonized sorghum seeds kg-1 soil. All the fungicides were evaluated for their efficacy at various concentrations, 50, 100, 150, 200 and 500 ppm, and were sprayed in the field at 0.2% a.i. l-1. All fungicides significantly reduced the severity of the disease but Ridomil MZ was most effective. Topsin-M at a concentration of 500 ppm was the most effective in reducing radial growth of the pathogenic fungi (74.2%. Ridomil MZ reduced disease severity by 32% and was followed in effectiveness by the combination Bavistin+Captaf (26.5%. Maximum yield was obtained in plots sprayed with Bavistin+Captaf (1198 kg ha-1 followed by Bavistin+Indofil Z-78 (1172 kg ha-1. It was worth noting that the highest net profit as well as the highest cost-benefit ratio was obtained with Bavistin+Indofil Z-78 (1:3.2, followed by Bavistin+Captaf (1:1.3.

Alternative models of DSM-5 PTSD: Examining diagnostic implications.

Science.gov (United States)

Murphy, Siobhan; Hansen, Maj; Elklit, Ask; Yong Chen, Yoke; Raudzah Ghazali, Siti; Shevlin, Mark

2018-04-01

The factor structure of DSM-5 posttraumatic stress disorder (PTSD) has been extensively debated with evidence supporting the recently proposed seven-factor Hybrid model. However, despite myriad studies examining PTSD symptom structure few have assessed the diagnostic implications of these proposed models. This study aimed to generate PTSD prevalence estimates derived from the 7 alternative factor models and assess whether pre-established risk factors associated with PTSD (e.g., transportation accidents and sexual victimisation) produce consistent risk estimates. Seven alternative models were estimated within a confirmatory factor analytic framework using the PTSD Checklist for DSM-5 (PCL-5). Data were analysed from a Malaysian adolescent community sample (n = 481) of which 61.7% were female, with a mean age of 17.03 years. The results indicated that all models provided satisfactory model fit with statistical superiority for the Externalising Behaviours and seven-factor Hybrid models. The PTSD prevalence estimates varied substantially ranging from 21.8% for the DSM-5 model to 10.0% for the Hybrid model. Estimates of risk associated with PTSD were inconsistent across the alternative models, with substantial variation emerging for sexual victimisation. These findings have important implications for research and practice and highlight that more research attention is needed to examine the diagnostic implications emerging from the alternative models of PTSD. Copyright © 2017 Elsevier B.V. All rights reserved.

Dynamics and Control of a Minimally Actuated Biomimetic Vehicle: Part 1 - Aerodynamic Model (Postprint)

Science.gov (United States)

2009-08-01

B L     LW Downstroke rcp B LWD =     xWPcp sinα+∆x B L xWPcp sinφLW cosα− y WP cp cosφLW − w 2 xWPcp cosφLW cosα + y WP cp sinφLW +∆z B L...associated with each wing and stroke are given by MBRWU = rcp B RWU × FBRWU MBRWD = rcp B RWD × FBRWD MBLWU = rcp B LWU × FBLWU MBLWD = rcp B LWD × FBLWD (14

A pilot plant for solar-cell manufacture; Ligne pilote de fabrication de cellules solaires

Energy Technology Data Exchange (ETDEWEB)

Fischer, D.; Ziegler, Y.; Closset, A. [VHF - Technologies SA, Yverdon-les-Bains (Switzerland)

2005-07-01

A pilot plant for the manufacture of amorphous silicon solar cells on plastic film substrate was built allowing the annual production of 40 kW peak power. The production steps comprise: a) the continuous coating of n-i-p solar cells by VHF-PECVD with a capacity of 28.5 meters in 8.5 hours; b) transparent-conducting-oxide (TCO) top contact structuring using a continuous process; c) series connection step (scribing and Ag-paste) with a capacity of 28 meters in 6 hours; d) back and top contact sputtering with 3 parallel magnetrons; e) integration of a large-area vacuum laminator enabling the simultaneous lamination of 4 products of 4 Wp. In parallel with this project, a complete cost model was established enabling a more quantitative approach of the future technological and industrial strategy of the company. An increase of the capacity to 100 kWp has been planned for summer 2005.

Coupled Model Intercomparison Project 5 (CMIP5) simulations of climate following volcanic eruptions

KAUST Repository

Driscoll, Simon; Bozzo, Alessio; Gray, Lesley J.; Robock, Alan; Stenchikov, Georgiy L.

2012-01-01

The ability of the climate models submitted to the Coupled Model Intercomparison Project 5 (CMIP5) database to simulate the Northern Hemisphere winter climate following a large tropical volcanic eruption is assessed. When sulfate aerosols are produced by volcanic injections into the tropical stratosphere and spread by the stratospheric circulation, it not only causes globally averaged tropospheric cooling but also a localized heating in the lower stratosphere, which can cause major dynamical feedbacks. Observations show a lower stratospheric and surface response during the following one or two Northern Hemisphere (NH) winters, that resembles the positive phase of the North Atlantic Oscillation (NAO). Simulations from 13 CMIP5 models that represent tropical eruptions in the 19th and 20th century are examined, focusing on the large-scale regional impacts associated with the large-scale circulation during the NH winter season. The models generally fail to capture the NH dynamical response following eruptions. They do not sufficiently simulate the observed post-volcanic strengthened NH polar vortex, positive NAO, or NH Eurasian warming pattern, and they tend to overestimate the cooling in the tropical troposphere. The findings are confirmed by a superposed epoch analysis of the NAO index for each model. The study confirms previous similar evaluations and raises concern for the ability of current climate models to simulate the response of a major mode of global circulation variability to external forcings. This is also of concern for the accuracy of geoengineering modeling studies that assess the atmospheric response to stratosphere-injected particles.

Coupled Model Intercomparison Project 5 (CMIP5) simulations of climate following volcanic eruptions

KAUST Repository

Driscoll, Simon

2012-09-16

The ability of the climate models submitted to the Coupled Model Intercomparison Project 5 (CMIP5) database to simulate the Northern Hemisphere winter climate following a large tropical volcanic eruption is assessed. When sulfate aerosols are produced by volcanic injections into the tropical stratosphere and spread by the stratospheric circulation, it not only causes globally averaged tropospheric cooling but also a localized heating in the lower stratosphere, which can cause major dynamical feedbacks. Observations show a lower stratospheric and surface response during the following one or two Northern Hemisphere (NH) winters, that resembles the positive phase of the North Atlantic Oscillation (NAO). Simulations from 13 CMIP5 models that represent tropical eruptions in the 19th and 20th century are examined, focusing on the large-scale regional impacts associated with the large-scale circulation during the NH winter season. The models generally fail to capture the NH dynamical response following eruptions. They do not sufficiently simulate the observed post-volcanic strengthened NH polar vortex, positive NAO, or NH Eurasian warming pattern, and they tend to overestimate the cooling in the tropical troposphere. The findings are confirmed by a superposed epoch analysis of the NAO index for each model. The study confirms previous similar evaluations and raises concern for the ability of current climate models to simulate the response of a major mode of global circulation variability to external forcings. This is also of concern for the accuracy of geoengineering modeling studies that assess the atmospheric response to stratosphere-injected particles.

Studying the impact of climate change on coastal aquifers and adjacent wetlands

Science.gov (United States)

Stigter, Tibor; Ribeiro, Luís.; Oliveira, Rodrigo; Samper, Javier; Fakir, Younes; Fonseca, Luís.; Monteiro, José Paulo; Nunes, João. Pedro; Pisani, Bruno

2010-05-01

program, assessing the impact of climate change on coastal groundwater resources and dependent ecosystems. These resources are often intensively exploited, potentially leading to saltwater intrusion and the degradation of groundwater and dependent wetlands. Climate change may increase this problem in Mediterranean regions, due to the combined effect of rising sea levels and decreasing aquifer recharge. CLIMWAT aims to address this problem by employing a multimethodological approach involving climate scenarios, surface and groundwater flow and transport modeling, as well as hydrochemical indicator and ecological diversity indices. Research is performed in three coastal areas: the Central Algarve in Portugal, the Ebro delta in Spain and the Atlantic Sahel in Morocco. The mean annual temperatures are 17.4 ° C, 17.2 ° C and 17.5 ° C, respectively, whereas mean annual rainfall is lower in the Atlantic Sahel (390 mm) than in the Ebro Delta (520 mm) and the Central Algarve (660 mm). Work package (WP) 1 involves the collection of existing data (in a GIS environment), baseline characterization and the selection of monitoring locations. These include wells and springs of official (water level/quality) monitoring networks, as well as additional observation points selected at strategic locations, including the wetlands receiving groundwater and adjacent aquifer sectors. In WP2 the climate scenarios are selected and integrated in hydrological models (SWAT, GISBALAN), which are developed and calibrated with existing data, prior to scenario modeling. The main focus of this WP is to estimate the evolution of surface runoff and groundwater recharge under climate change. Data on climate change scenarios and model projections are compiled from: (i) the PRUDENCE project; (ii) the ENSEMBLES project; (iii) IPCC scenarios and projections, AR4; (iv) AEMet (Spanish Meteorological Agency) for generation of regional scenarios of climate change in Spain. For Morocco, where runoff is

Heterozygous CDKL5 Knockout Female Mice Are a Valuable Animal Model for CDKL5 Disorder

Directory of Open Access Journals (Sweden)

Claudia Fuchs

2018-01-01

Full Text Available CDKL5 disorder is a severe neurodevelopmental disorder caused by mutations in the X-linked CDKL5 (cyclin-dependent kinase-like five gene. CDKL5 disorder primarily affects girls and is characterized by early-onset epileptic seizures, gross motor impairment, intellectual disability, and autistic features. Although all CDKL5 female patients are heterozygous, the most valid disease-related model, the heterozygous female Cdkl5 knockout (Cdkl5 +/− mouse, has been little characterized. The lack of detailed behavioral profiling of this model remains a crucial gap that must be addressed in order to advance preclinical studies. Here, we provide a behavioral and molecular characterization of heterozygous Cdkl5 +/− mice. We found that Cdkl5 +/− mice reliably recapitulate several aspects of CDKL5 disorder, including autistic-like behaviors, defects in motor coordination and memory performance, and breathing abnormalities. These defects are associated with neuroanatomical alterations, such as reduced dendritic arborization and spine density of hippocampal neurons. Interestingly, Cdkl5 +/− mice show age-related alterations in protein kinase B (AKT and extracellular signal-regulated kinase (ERK signaling, two crucial signaling pathways involved in many neurodevelopmental processes. In conclusion, our study provides a comprehensive overview of neurobehavioral phenotypes of heterozygous female Cdkl5 +/− mice and demonstrates that the heterozygous female might be a valuable animal model in preclinical studies on CDKL5 disorder.

MSSM-like from SU5×D4 models

Directory of Open Access Journals (Sweden)

R. Ahl Laamara

2016-05-01

Full Text Available Using finite discrete group characters and symmetry breaking by hyperflux as well as constraints on top-quark family, we study minimal low energy effective theory following from SU5×D4 models embedded in F-theory with non-abelian flux. Matter curves spectrum of the models is obtained from SU5×S5 theory with monodromy S5 by performing two breakings: first from symmetric group S5 to S4 subsymmetry, and next to dihedral D4 subgroup. As a consequence, and depending on the ways of decomposing triplets of S4, we end with three types of D4-models. Explicit constructions of these theories are given and a MSSM-like spectrum is derived.

EQ6 Calculation for Chemical Degradation of Shippingport LWBR (TH/U Oxide) Spent Nuclear Fuel Waste Packages

International Nuclear Information System (INIS)

S. Arthur

2000-01-01

calculation, the chemical compositions (and subsequent criticality evaluations), of the simulations are limited to time periods up to 3.17 x 10 5 years. This longer time frame is closer to the one million year time horizon recently recommended by the National Academy of Sciences to the Environmental Protection Agency for performance assessment related to a nuclear repository (Ref. 5). However, it is important to note that after 100,000 years, most of the materials of interest (fissile and absorber materials) will have either been removed from the WP, reached a steady state, or been transmuted. The calculation included elements with high neutron-absorption cross sections, notably gadolinium (Gd), as well as the fissile materials. The results of this analysis will be used to ensure that the type and amount of criticality control material used in the WP design will prevent criticality

EQ6 Calculation for Chemical Degradation of Shippingport LWBR (TH/U Oxide) Spent Nuclear Fuel Waste Packages

Energy Technology Data Exchange (ETDEWEB)

S. Arthur

2000-09-14

calculation, the chemical compositions (and subsequent criticality evaluations), of the simulations are limited to time periods up to 3.17 x 10{sup 5} years. This longer time frame is closer to the one million year time horizon recently recommended by the National Academy of Sciences to the Environmental Protection Agency for performance assessment related to a nuclear repository (Ref. 5). However, it is important to note that after 100,000 years, most of the materials of interest (fissile and absorber materials) will have either been removed from the WP, reached a steady state, or been transmuted. The calculation included elements with high neutron-absorption cross sections, notably gadolinium (Gd), as well as the fissile materials. The results of this analysis will be used to ensure that the type and amount of criticality control material used in the WP design will prevent criticality.

Effect of a Chloride Transient on the EAC Crack Growth Behaviour of Low-Alloy RPV Steels under Simulated BWR Operating Conditions (CASTOC WP 3, PSI Test 2)

International Nuclear Information System (INIS)

Ritter, S.; Seifert, H.-P.

2002-11-01

Within the CASTOC-project (5 t h EU FW programme), the environmentally-assisted crack (EAC) growth behaviour of low-alloy reactor pressure vessel (RPV) steels is experimentally investigated under simulated transient and steady-state boiling water reactor (BWR) power operation conditions by six European laboratories. The present report is a summary of the second test of working package (WP) 3 with a NaCl transient, performed at Paul Scherrer Institut (PSI). In the first part of the experiment, an actively growing EAC crack with a crack growth rate (CGR) in the range of the 'low-sulphur SCC line' of the GE-model was generated by periodical partial unloading (PPU) in oxygenated high-temperature, high-purity water (T = 288 o C, DO = 8 ppm). Then a chloride transient of 49 ppb Cl - was applied for ∼40 h. After this transient, the load level was reduced and the loading conditions were changed to pure cyclic loading. Thereupon a second transient with a chloride concentration of 49 ppb was applied. In both RPV steels, the first chloride transient of 49 ppb Cl - resulted in an acceleration of the EAC crack growth by more than one order of magnitude and in fast, stationary SCC crack growth during the constant load phase of the PPU cycles at K I values 1/2 . 3 h after adding chloride to the high-purity water, the EAC CGR started to increase in the high-sulphur RPV steel during the constant load phase of a PPU cycle and after 20 h a stationary EAC CGR value in the range of the 'high-sulphur SCC curve' of the GE-model was reached. After 5 h in high-purity water, the crack growth began to slow down after a partial unloading cycle and 15 h later it reached again a stationary CGR value in the range of the 'low-sulphur SCC curve' of the GE-model. The second chloride transient did not result in an acceleration of the crack growth in both investigated specimens. This was explained by crack closure effects, which occurred in both specimens after the reduction of the load. The CGR

Reference Model 5 (RM5): Oscillating Surge Wave Energy Converter

Energy Technology Data Exchange (ETDEWEB)

Yu, Y. H. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jenne, D. S. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thresher, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Copping, A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Geerlofs, S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hanna, L. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-01-01

This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter (OSWEC) reference model design in a complementary manner to Reference Models 1-4 contained in the above report. A conceptual design for a taut moored oscillating surge wave energy converter was developed. The design had an annual electrical power of 108 kilowatts (kW), rated power of 360 kW, and intended deployment at water depths between 50 m and 100 m. The study includes structural analysis, power output estimation, a hydraulic power conversion chain system, and mooring designs. The results were used to estimate device capital cost and annual operation and maintenance costs. The device performance and costs were used for the economic analysis, following the methodology presented in SAND2013-9040 that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays up to 100 devices. The levelized cost of energy estimated for the Reference Model 5 OSWEC, presented in this report, was for a single device and arrays of 10, 50, and 100 units, and it enabled the economic analysis to account for cost reductions associated with economies of scale. The baseline commercial levelized cost of energy estimate for the Reference Model 5 device in an array comprised of 10 units is $1.44/kilowatt-hour (kWh), and the value drops to approximately $0.69/kWh for an array of 100 units.

Ocena wpływu relaksacji poizometrycznej na napięcia mięśniowe u chorych z zawrotami głowy typu szyjnego

Directory of Open Access Journals (Sweden)

Hanna Zielińska-Bliźniewska

2012-11-01

Full Text Available Wprowadzenie: Celem pracy była ocena wpływu relaksacji poizometrycznej na napięcia mięśniowe u chorych z zawrotami głowy typu szyjnego. Materiał i metody: Badania przeprowadzono na grupie losowo wybranych 100 chorych, w tym 65 kobiet w wieku 20–76 lat i 35 mężczyzn w wieku 20–73 lat, leczonych w Klinice Otolaryngologii i Onkologii Laryngologicznej Uniwersyteckiego Szpitala Klinicznego im. WAM w Łodzi. Pacjentów podzielono na 2 grupy: I – badaną, liczącą 50 chorych z zawrotami głowy pochodzenia szyjnego, II – porównawczą, składającą się z 50 zdrowych osób, bez zawrotów głowy. U wszystkich chorych przeprowadzono szczegółowy wywiad, badanie przedmiotowe otolaryngologiczne, otoneurologiczne, fizykalne oraz rutynowe badania laboratoryjne. Każdy chory był konsultowany neurologicznie, okulistycznie i internistycznie oraz miał wykonywane USG naczyń doczaszkowych, tomografię komputerową odcinka szyjnego kręgosłupa i głowy. U wszystkich pacjentów zastosowano indywidualnie dobrany cykl ćwiczeń, uwzględniający dotychczasowy przebieg choroby oraz ewentualne przeciwwskazania, obejmujący relaksację poizometryczną mięśni okołokręgosłupowych w odcinku szyjnym przez okres 2 miesięcy. Obiektywna ocena skuteczności zastosowanej terapii odbywa- ła się (przed rozpoczęciem terapii oraz po 2 tygodniach, po miesiącu i po 2 miesiącach za pomocą liniowych pomiarów czynnego zakresu ruchomości szyjnego odcinka kręgosłupa oraz siły mięśniowej według testu Lovetta w skali punktowej i oceny zawrotów głowy według kryteriów Silvoniemiego. Wyniki: Na podstawie przeprowadzonych badań stwierdzono, że pod wpływem kompleksowych ćwiczeń w grupie badanej nastąpiła znaczna poprawa ruchomości odcinka szyjnego kręgosłupa oraz siły mięśniowej. Wnioski: Zarówno w badaniach obiektywnych (pomiar ruchomości czynnej szyjnego odcinka kręgosłupa oraz siły mięśniowej, jak i subiektywnych (ocena wg

Assessment of risk associated with long-term corrosion of alloy 22 and Ti-7 in the potential yucca mountain high-level nuclear waste repository

International Nuclear Information System (INIS)

Ahn, T.M.; Pensado, O.; Dunn, D.

2004-01-01

Full text of publication follows: The potential high-level nuclear waste (HLW) repository at Yucca Mountain (YM) may rely on the robustness of the outer container of the waste package (WP) as one of many barriers for waste isolation. The container is proposed to be constructed of Alloy 22, a Ni-Cr-Mo alloy known to be resistant to localized corrosion and stress corrosion cracking. Additionally, drip shields (DS) will be emplaced above the WP to minimize the groundwater contact, in the form of seepage, with the WP. The candidate alloy to construct the drip shields is a titanium based alloy (Ti-7) with some small amounts of Pd and is also known for resistance to localized corrosion. To enhance confidence of long-term WP and DS lifetimes, it is necessary to assess the conditions under which loss of passivity or localized degradation processes could occur. The accelerated degradation processes may include uniform passivity breakdown, localized corrosion, and stress corrosion cracking. This paper evaluates how such processes may occur under the long-term YM repository conditions. In the uniform passivity breakdown, three potential concerns are evaluated. The first is anodic sulphur segregation at the interface between the passive film and the bare metal. This paper models the cyclic behavior of free transient fast dissolution (induced by sulfur segregation) and re-passivation. The second is the potential accumulation of corrosion products on the WP surface, which may act as cathode of large surface area leading to fast corrosion. The effective ratio of the corrosion product area to the bare metal area is evaluated. The third is the ion selectivity in the corrosion products to alter the aqueous chemistry, which may accelerate or inhibit the corrosion. Thermodynamics of ionic sorption in the corrosion products is reviewed. In the localized corrosion, the groundwater chemistry on the WP surface is evaluated at the temperatures of the WP above 100 deg. C during the early

Countercurrent flow limitation model for RELAP5/MOD3

International Nuclear Information System (INIS)

Riemke, R.A.

1991-01-01

This paper reports on a countercurrent flow limitation model incorporated into the RELAP5/MOD3 system transient analysis code. The model is implemented in a manner similar to the RELAP5 chocking model. Simulations using air/water flooding test problem demonstrate the ability of the code to significantly improve its comparison to data when a flooding correlation is used

Korzystny wpływ kwasów omega-3 na rozwój dziecka = The beneficial effect of omega-3 acids on child development

Directory of Open Access Journals (Sweden)

Agnieszka Pluta

2016-07-01

Zakład Pielęgniarstwa Społecznego Collegium Medicum w Bydgoszczy Uniwersytetu Mikołaja Kopernika w Toruniu         Keywords: child development, omega-3acids, supplementation. Słowa kluczowe: rozwój dziecka,  kwasy omega-3, suplementacja.     Abstract   Fatty acids are one of the determinants of normal development of the child. A special role is attributed to omega-3 acids. Representative of this group of acids include alpha-linolenic acid, eicosapentaenoic acid and docosahexaenoic acid. The paper presents the biological activity of omega-3 with a particular focus on their impact on child development.       Streszczenie   Kwasy tłuszczowe są jednym z determinantów prawidłowego rozwoju dziecka. Szczególną rolę przypisuje się kwasom omega-3. Przedstawicielami tej grupy kwasów są kwas alfa-linolenowy, dokozaheksaenowy oraz eikozapentaenowy. W pracy przedstawiono aktywność biologiczną kwasów omega-3 ze szczególnym uwzględnieniem ich wpływu na rozwój dziecka.

Grid-Connected Semitransparent Building-Integrated Photovoltaic System: The Comprehensive Case Study of the 120 kWp Plant in Kunming, China

Directory of Open Access Journals (Sweden)

Yunfeng Wang

2018-01-01

Full Text Available A 120 kWp building-integrated photovoltaic (BIPV system was installed on the south facade of the Solar Energy Research Institute building in Yunnan Normal University. The area of the curtain wall was 1560 m2 (26 m × 60 m, which consisted of 720 semitransparent monocrystalline silicon double-glazing PV panels. This paper studied the yearly and monthly variations of power generation in terms of solar data and meteorological parameters. The total amount of power generation of the BIPV system measured from October 2014 to September 2015 was 64.607 MWh, and the simulation results with TRNSYS (Transient Systems Simulation Program provided the 75.515 MWh predicted value of annual electricity production with the meteorological database of Meteonorm, while, based on the average value of the performance ratio (PR of 60% and the life cycle assessment (LCA of the system, the energy payback time (EPBT of 9.38 years and the potential for pollutant emission reductions have been evaluated and the environmental cost is RMB ¥0.01053 per kWh. Finally, an economic analysis was carried out; the net present value (NPV and the economic payback time of the BIPV system were estimated to be RMB ¥359,347 and 15 years, respectively.

Summer Arctic sea ice albedo in CMIP5 models

OpenAIRE

Koenigk, T.; Devasthale, A.; Karlsson, K.-G.

2014-01-01

Spatial and temporal variations of summer sea ice albedo over the Arctic are analyzed using an ensemble of historical CMIP5 model simulations. The results are compared to the CLARA-SAL product that is based on long-term satellite observations. The summer sea ice albedo varies substantially among CMIP5 models, and many models show large biases compared to the CLARA-SAL product. Single summer months show an extreme spread of ice albedo among models; July values vary between 0....

Biological effect of ultrasoft x-ray, 1

International Nuclear Information System (INIS)

Narita, Noboru

1985-01-01

Biological effect on Escherichia coli by ultrasoft X-ray have been studied by comparing with that by uv light (2537 A) and by soft X-ray (40 kVp, 5 mA). Ultrasoft X-ray is aluminium characteristic X-ray (about 1.5 keV) produced by low energy electron collision on aluminium foil target and is obtained from Lea-type transmission target discharge tube. Escherichia coli used here are AB1157, AB1886 (uvrA6), JC1569 (recA), AB2470 (recB) and AB2480 (uvr rec) for inactivation experiment and WP2, WP2uvrA, WP2pKM101 and WP2uvrApKM101 for mutation induction experiment. These strains are all irradiated in buffer. Results obtained are summerized as follows : (i) inactivation by ultrasoft X-ray is located between ones by uv light and by soft X-ray, or ultrasoft X-ray gives a lethal damage that uvrA6 gene seems to contribute, and (ii) ultrasoft X-ray does not show the remarkable mutation induction like that induced by low dose irradiation of uv light or soft X-ray. (author)

Physiological variability and in vitro antifungal activity against Botrytis cinerea causing botrytis gray mold of chickpea (Cicer arietinum L.)

Energy Technology Data Exchange (ETDEWEB)

Hosen, M. I.; Ahmed, A. U.; Islam, M. R.

2010-07-01

Physiological variability was studied in 10 isolates of Botrytis cinerea causing botrytis gray mold of chickpea, collected from diverse agro climatic areas in Bangladesh. The optimum temperature and pH for the best mycelial radial growth of B. cinerea were 20 degree centigrade and 4.5, respectively. The mycelial radial growth increased with the temperature up to 20 degree centigrade thereafter it decreased gradually up to 30 degree centigrade and no growth was observed at 35 degree centigrade. Chickpea dextrose agar (CDA) medium supported the highest mycelial radial growth (79.17 mm). The quickest (in 5 days) sclerotia initiation was recorded on chickpea destrose agar and lentil dextrose agar (LDA) culture media while the highest number of spores (2.5104 mL{sup -}1) were recorded on LDA medium. The antagonist Trichoderma harzianum was found to be a good bio-control agent against B. cinerea. Among the seven fungicides Bavistin 50 WP (Carbendazim), CP-Zim 50 WP (Carbendazim), Sunphanate 70 WP (Thiophanate methyl) and Rovral 50 WP (Iprodione) were the most effective to inhibit the mycelial radial growth of B. cinerea at 500 mg L{sup -}1 concentration. (Author) 13 refs.

In vitro response of phaeoramularia angolensis to commonly used fungicides in Kenya

International Nuclear Information System (INIS)

Juma, I.M.; Siboe, M.

1996-01-01

The leaf and fruit spot disease of citrus spp. caused by the fungus Phaeoramularia angolensis Kirk is new and epidemic in Kenya, with a 100% crop yield loss. Poor response to fungicide application led to the suspicion that the fungus was resistant to conventional fungicides, hence the difficulties experienced in its control. Therefore the study was carried out to establish wether P.angolensis isolates from Western Kenya were screened for resistance. The following fungicides were used: copper fungicides(Cupric hydroxide 50% WP or kocide 101 and copper oxychloride 50% WP), Mancozeb 70% WP (Dithane M45)and Propineb 80% WPC (Antracol). Mancozeb 70% WP and Propineb were the most effective with LD-5-0 at 0.03 ppm and 0.25 ppm respectively. Copper fungicide LD-5-0 was above 3000 ppm (current manufacturers' recommended dosage is 7,500 ppm and 6,900 ppm for kocide 101 and copper oxychloride respectively). There was no obvious evidence of resistance. The fungi- static characteristics of copper fungicides and the application of wrong dosage and timing could be the reason for the difficulties experienced in the control of the disease. (author) 14 refs., 2 tables, 1 graph

Efficacy of Newer Molecules, Bioagents and Botanicals against Maydis Leaf Blight and Banded Leaf and Sheath Blight of Maize

Science.gov (United States)

Malik, Vinod Kumar; Singh, Manjeet; Hooda, Karambir Singh; Yadav, Naresh Kumar; Chauhan, Prashant Kumar

2018-01-01

Maize (Zea mays L.; 2N=20) is major staple food crop grown worldwide adapted to several biotic and abiotic stresses. Maydis leaf blight (MLB) and banded leaf and sheath blight (BLSB) are serious foliar fungal diseases may cause up to 40% and 100% grain yield loss, respectively. The present studies were undertaken to work out the efficacy of chemicals, botanicals and bioagents for the management of MLB and BLSB under field condition for two seasons Kharif 2014 and 2015. Five molecules (propiconazole 25 EC, hexaconazole 25 EC, carbendazim 50 WP, mancozeb 75 WP and carbedazim 12 WP + mancozeb 63 WP), two bioagents i.e. Trichoderma harzianum and T. viridae and three botanicals namely azadirachtin, sarpagandha and bel pathar were tested for their efficacy against MLB. Eight newer fungicides viz., difenconazole 250 SC, hexaconazole 5 EC, carbendazim 50WP, validamycin 3 L, tebuconazole 250 EC, trifloxystrobin 50 WG + tebuconazole 50 WG, azoxystrobin 250 EC and pencycuron 250 SC were evaluated against BLSB. Analysis revealed significant effects of propiconazole at 0.1%, carbendazim 12 WP + mancozeb 63 WP at 0.125% and sarpagandha leaves at 10% against MLB pathogen, whereas validamycin at 0.1% and trifloxystrobin 25 WG + tebuconazole 50 WG at 0.05% were found effective against BLSB. The slow rate of disease control virtually by the bioagents might have not shown instant effect on plant response to the yield enhancing components. The identified sources of management can be used further in strengthening the plant protection in maize against MLB and BLSB. PMID:29628818

Efficacy of Newer Molecules, Bioagents and Botanicals against Maydis Leaf Blight and Banded Leaf and Sheath Blight of Maize.

Science.gov (United States)

Malik, Vinod Kumar; Singh, Manjeet; Hooda, Karambir Singh; Yadav, Naresh Kumar; Chauhan, Prashant Kumar

2018-04-01

Maize ( Zea mays L.; 2N=20) is major staple food crop grown worldwide adapted to several biotic and abiotic stresses. Maydis leaf blight (MLB) and banded leaf and sheath blight (BLSB) are serious foliar fungal diseases may cause up to 40% and 100% grain yield loss, respectively. The present studies were undertaken to work out the efficacy of chemicals, botanicals and bioagents for the management of MLB and BLSB under field condition for two seasons Kharif 2014 and 2015. Five molecules (propiconazole 25 EC, hexaconazole 25 EC, carbendazim 50 WP, mancozeb 75 WP and carbedazim 12 WP + mancozeb 63 WP), two bioagents i.e. Trichoderma harzianum and T. viridae and three botanicals namely azadirachtin, sarpagandha and bel pathar were tested for their efficacy against MLB. Eight newer fungicides viz., difenconazole 250 SC, hexaconazole 5 EC, carbendazim 50WP, validamycin 3 L, tebuconazole 250 EC, trifloxystrobin 50 WG + tebuconazole 50 WG, azoxystrobin 250 EC and pencycuron 250 SC were evaluated against BLSB. Analysis revealed significant effects of propiconazole at 0.1%, carbendazim 12 WP + mancozeb 63 WP at 0.125% and sarpagandha leaves at 10% against MLB pathogen, whereas validamycin at 0.1% and trifloxystrobin 25 WG + tebuconazole 50 WG at 0.05% were found effective against BLSB. The slow rate of disease control virtually by the bioagents might have not shown instant effect on plant response to the yield enhancing components. The identified sources of management can be used further in strengthening the plant protection in maize against MLB and BLSB.

Efficacy of Newer Molecules, Bioagents and Botanicals against Maydis Leaf Blight and Banded Leaf and Sheath Blight of Maize

Directory of Open Access Journals (Sweden)

2018-04-01

Full Text Available Maize (Zea mays L.; 2N=20 is major staple food crop grown worldwide adapted to several biotic and abiotic stresses. Maydis leaf blight (MLB and banded leaf and sheath blight (BLSB are serious foliar fungal diseases may cause up to 40% and 100% grain yield loss, respectively. The present studies were undertaken to work out the efficacy of chemicals, botanicals and bioagents for the management of MLB and BLSB under field condition for two seasons Kharif 2014 and 2015. Five molecules (propiconazole 25 EC, hexaconazole 25 EC, carbendazim 50 WP, mancozeb 75 WP and carbedazim 12 WP + mancozeb 63 WP, two bioagents i.e. Trichoderma harzianum and T. viridae and three botanicals namely azadirachtin, sarpagandha and bel pathar were tested for their efficacy against MLB. Eight newer fungicides viz., difenconazole 250 SC, hexaconazole 5 EC, carbendazim 50WP, validamycin 3 L, tebuconazole 250 EC, trifloxystrobin 50 WG + tebuconazole 50 WG, azoxystrobin 250 EC and pencycuron 250 SC were evaluated against BLSB. Analysis revealed significant effects of propiconazole at 0.1%, carbendazim 12 WP + mancozeb 63 WP at 0.125% and sarpagandha leaves at 10% against MLB pathogen, whereas validamycin at 0.1% and trifloxystrobin 25 WG + tebuconazole 50 WG at 0.05% were found effective against BLSB. The slow rate of disease control virtually by the bioagents might have not shown instant effect on plant response to the yield enhancing components. The identified sources of management can be used further in strengthening the plant protection in maize against MLB and BLSB.

Quantitative DCE-MRI for prediction of pathological complete response following neoadjuvant treatment for locally advanced breast cancer: the impact of breast cancer subtypes on the diagnostic accuracy

Energy Technology Data Exchange (ETDEWEB)

Drisis, Stylianos; Stathopoulos, Konstantinos; Chao, Shih-Li; Lemort, Marc [Institute Jules Bordet, Radiology Department, Brussels (Belgium); Metens, Thierry [Erasme University Hospital, Radiology Department, Brussels (Belgium); Ignatiadis, Michael [Institute Jules Bordet, Oncology Department, Brussels (Belgium)

2016-05-15

To assess whether DCE-MRI pharmacokinetic (PK) parameters obtained before and during chemotherapy can predict pathological complete response (pCR) differently for different breast cancer groups. Eighty-four patients who received neoadjuvant chemotherapy for locally advanced breast cancer were retrospectively included. All patients underwent two DCE-MRI examinations, one before (EX1) and one during treatment (EX2). Tumours were classified into different breast cancer groups, namely triple negative (TNBC), HER2+ and ER+/HER2-, and compared with the whole population (WP). PK parameters Ktrans and Ve were extracted using a two-compartment Tofts model. At EX1, Ktrans predicted pCR for WP and TNBC. At EX2, maximum diameter (Dmax) predicted pCR for WP and ER+/HER2-. Both PK parameters predicted pCR in WP and TNBC and only Ktrans for the HER2+. pCR was predicted from relative difference (EX1 - EX2)/EX1 of Dmax and both PK parameters in the WP group and only for Ve in the TNBC group. No PK parameter could predict response for ER+/HER-. ROC comparison between WP and breast cancer groups showed higher but not statistically significant values for TNBC for the prediction of pCR Quantitative DCE-MRI can better predict pCR after neoadjuvant treatment for TNBC but not for the ER+/HER2- group. (orig.)

Toxicological evaluation of genetically modified cotton (Bollgard) and Dipel WP on the non-target soil mite Scheloribates praeincisus (Acari: Oribatida).

Science.gov (United States)

Oliveira, Anibal R; Castro, Thiago R; Capalbo, Deise M F; Delalibera, Italo

2007-01-01

Insecticides derived from the bacterium Bacillus thuringiensis (Bt) and plants genetically modified (GM) to express B. thuringiensis toxins are important alternatives for insect pest control worldwide. Risk assessment of B. thuringiensis toxins to non-target organisms has been extensively studied but few toxicological tests have considered soil invertebrates. Oribatid mites are one of the most diverse and abundant arthropod groups in the upper layers of soil and litter in natural and agricultural systems. These mites are exposed to the toxic compounds of GM crops or pesticides mainly when they feed on vegetal products incorporated in the soil. Although some effects of B. thuringiensis products on Acari have been reported, effects on oribatid mites are still unknown. This study investigated the effects of the ingestion of Bt cotton Bollgard and of the B. thuringiensis commercial product Dipel WP on the pantropical species Scheloribates praeincisus (Scheloribatidae). Ingestion of Bollgard and Dipel did not affect adult and immature survivorship and food consumption (estimated by number of fecal pellets produced daily) or developmental time of immature stages of S. praeincisus. These results indicate the safety of Bollgard and Dipel to S. praeincisus under field conditions where exposition is lower and other food sources besides leaves of Bt plants are available. The method for toxicological tests described here can be adapted to other species of Oribatida, consisting on a new option to risk assessment studies.

Basic investigation of the laminated alginate impression technique: Setting time, permanent deformation, elastic deformation, consistency, and tensile bond strength tests.

Science.gov (United States)

Kitamura, Aya; Kawai, Yasuhiko

2015-01-01

Laminated alginate impression for edentulous is simple and time efficient compared to border molding technique. The purpose of this study was to examine clinical applicability of the laminated alginate impression, by measuring the effects of different Water/Powder (W/P) and mixing methods, and different bonding methods in the secondary impression of alginate impression. Three W/P: manufacturer-designated mixing water amount (standard), 1.5-fold (1.5×) and 1.75-fold (1.75×) water amount were mixed by manual and automatic mixing methods. Initial and complete setting time, permanent and elastic deformation, and consistency of the secondary impression were investigated (n=10). Additionally, tensile bond strength between the primary and secondary impression were measured in the following surface treatment; air blow only (A), surface baking (B), and alginate impression material bonding agent (ALGI-BOND: AB) (n=12). Initial setting times significantly shortened with automatic mixing for all W/P (p<0.05). The permanent deformation decreased and elastic deformation increased as high W/P, regardless of the mixing method. Elastic deformation significantly reduced in 1.5× and 1.75× with automatic mixing (p<0.05). All of these properties resulted within JIS standards. For all W/P, AB showed a significantly high bonding strength as compared to A and B (p<0.01). The increase of mixing water, 1.5× and 1.75×, resulted within JIS standards in setting time, suggesting its applicability in clinical setting. The use of automatic mixing device decreased elastic strain and shortening of the curing time. For the secondary impression application of adhesives on the primary impression gives secure adhesion. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Neutralino constraints on the flipped SU(5) model

Energy Technology Data Exchange (ETDEWEB)

Abel, S.A.; Cottingham, W.N. (Bristol Univ. (UK). H.H. Wills Physics Lab.); Whittingham, I. (James Cook Univ. of North Queensland, Townsville (Australia). Dept. of Physics)

1990-07-19

We examine the decay width of Z{yields}neutral invisibles in the supersymmetric flipped SU(5) model. It is found that these processes would give contributions to the Z width leading to the inference of a non-integer number of generations between close to three and {approx equal} 3.5, and we argue that an accurate determination of this quantity could lead to significant restrictions on the allowable parameter space in this model. (orig.).

Chromosomal location of traits associated with wheat seedling water and phosphorus use efficiency under different water and phosphorus stresses.

Science.gov (United States)

Cao, Hong-Xing; Zhang, Zheng-Bin; Sun, Cheng-Xu; Shao, Hong-Bo; Song, Wei-Yi; Xu, Ping

2009-09-18

The objective of this study was to locate chromosomes for improving water and phosphorus-deficiency tolerance of wheat at the seedling stage. A set of Chinese Spring-Egyptian Red wheat substitution lines and their parent Chinese Spring (recipient) and Egyptian Red (donor) cultivars were measured to determine the chromosomal locations of genes controlling water use efficiency (WUE) and phosphorus use efficiency (PUE) under different water and phosphorus conditions. The results underlined that chromosomes 1A, 7A, 7B, and 3A showed higher leaf water use efficiency (WUE(l) = Pn/Tr; Pn = photosynthetic rate; Tr = transpiration rate) under W-P (Hoagland solution with 1/2P), -W-P (Hoagland solution with 1/2P and 10% PEG). Chromosomes 7A, 3D, 2B, 3B, and 4B may carry genes for positive effects on individual plant water use efficiency (WUE(p) = biomass/TWC; TWC = total water consumption) under WP (Hoagland solution), W-P and -W-P treatment. Chromosomes 7A and 7D carry genes for PUE enhancement under WP, -WP (Hoagland solution with 10% PEG) and W-P treatment. Chromosome 7A possibly has genes for controlling WUE and PUE simultaneously, which indicates that WUE and PUE may share the same genetic background. Phenotypic and genetic analysis of the investigated traits showed that photosynthetic rate (Pn) and transpiration rate (Tr), Tr and WUE(l) showed significant positive and negative correlations under WP, W-P, -WP and -W-P, W-P, -WP treatments, respectively. Dry mass (DM), WUE(P), PUT (phosphorus uptake) all showed significant positive correlation under WP, W-P and -WP treatment. PUE and phosphorus uptake (PUT = P uptake per plant) showed significant negative correlation under the four treatments. The results might provide useful information for improving WUE and PUE in wheat genetics.

Chromosomal Location of Traits Associated with Wheat Seedling Water and Phosphorus Use Efficiency under Different Water and Phosphorus Stresses

Directory of Open Access Journals (Sweden)

Wei-Yi Song

2009-09-01

Full Text Available The objective of this study was to locate chromosomes for improving water and phosphorus-deficiency tolerance of wheat at the seedling stage. A set of Chinese Spring- Egyptian Red wheat substitution lines and their parent Chinese Spring (recipient and Egyptian Red (donor cultivars were measured to determine the chromosomal locations of genes controlling water use efficiency (WUE and phosphorus use efficiency (PUE under different water and phosphorus conditions. The results underlined that chromosomes 1A, 7A, 7B, and 3A showed higher leaf water use efficiency (WUEl = Pn/Tr; Pn = photosynthetic rate; Tr = transpiration rate under W-P (Hoagland solution with1/2P, -W-P (Hoagland solution with 1/2P and 10% PEG. Chromosomes 7A, 3D, 2B, 3B, and 4B may carry genes for positive effects on individual plant water use efficiency (WUEp = biomass/TWC; TWC = total water consumption under WP (Hoagland solution, W-P and -W-P treatment. Chromosomes 7A and 7D carry genes for PUE enhancement under WP, -WP (Hoagland solution with 10% PEG and W-P treatment. Chromosome 7A possibly has genes for controlling WUE and PUE simultaneously, which indicates that WUE and PUE may share the same genetic background. Phenotypic and genetic analysis of the investigated traits showed that photosynthetic rate (Pn and transpiration rate (Tr, Tr and WUEl showed significant positive and negative correlations under WP, W-P, -WP and -W-P, W-P, -WP treatments, respectively. Dry mass (DM, WUEP, PUT (phosphorus uptake all showed significant positive correlation under WP, W-P and -WP treatment. PUE and phosphorus uptake (PUT = P uptake per plant showed significant negative correlation under the four treatments. The results might provide useful information for improving WUE and PUE in wheat genetics.

STRUCTURAL CALCULATIONS FOR THE CODISPOSAL OF TRIGA SPENT NUCLEAR FUEL IN A WASTE PACKAGE

International Nuclear Information System (INIS)

S. Mastilovic

1999-01-01

The purpose of this analysis is to determine the structural response of a TRIGA Department of Energy (DOE) spent nuclear fuel (SNF) codisposal canister placed in a 5-Defense High Level Waste (DHLW) waste package (WP) and subjected to a tipover design basis event (DBE) dynamic load; the results will be reported in terms of displacements and stress magnitudes. This activity is associated with the WP design

Simplified TBA equations of the AdS5 × S5 mirror model

NARCIS (Netherlands)

Arutyunov, G.E.; Frolov, S.

2009-01-01

We use the recently found integral representation for the dressing phase in the kinematic region of the mirror theory to simplify the TBA equations for the AdS5 × S5 mirror model. The resulting set of equations provides an efficient starting point for both analytic and numerical studies.

5D Building Information Modelling – A Practicability Review

Directory of Open Access Journals (Sweden)

Lee Xia Sheng

2016-01-01

Full Text Available Quality, time and cost are the three most important elements in any construction project. Building information that comes timely and accurately in multiple dimensions will facilitate a refined decision making process which can improve the construction quality, time and cost. 5 dimensional Building Information Modelling or 5D BIM is an emerging trend in the construction industry that integrates all the major information starting from the initial design to the final construction stage. After that, the integrated information is arranged and communicated through Virtual Design and Construction (VDC. This research is to gauge the practicability of 5D BIM with an action research type pilot study by the means of hands-on modelling of a conceptual bungalow design based on one of the most popular BIM tools. A bungalow is selected as a study subject to simulate the major stages of 5D BIM digital workflow. The whole process starts with developing drawings (2D into digital model (3D, and is followed by the incorporation of time (4D and cost (5D. Observations are focused on the major factors that will affect the practicability of 5D BIM, including the modelling effort, inter-operability, information output and limitations. This research concludes that 5D BIM certainly has high level practicability which further differentiates BIM from Computer Aided Design (CAD. The integration of information not only enhanced the efficiency and accuracy of process in all stages, but also enabled decision makers to have a sophisticated interpretation of information which is almost impossible with the conventional 2D CAD workflow. Although it is possible to incorporate more than 5 dimensions of information, it is foreseeable that excessive information may escalate the complexity unfavourably for BIM implementation. 5D BIM has achieved a significant level of practicability; further research should be conducted to streamline implementation. Once 5D BIM is matured and widely

Comparing the dependability and associations with functioning of the DSM-5 Section III trait model of personality pathology and the DSM-5 Section II personality disorder model.

Science.gov (United States)

Chmielewski, Michael; Ruggero, Camilo J; Kotov, Roman; Liu, Keke; Krueger, Robert F

2017-07-01

Two competing models of personality psychopathology are included in the fifth edition of the Diagnostic Statistical Manual of Mental Disorders ( DSM-5 ; American Psychiatric Association, 2013); the traditional personality disorder (PD) model included in Section II and an alternative trait-based model included in Section III. Numerous studies have examined the validity of the alternative trait model and its official assessment instrument, the Personality Inventory for DSM-5 (PID-5; Krueger, Derringer, Markon, Watson, & Skodol, 2012). However, few studies have directly compared the trait-based model to the traditional PD model empirically in the same dataset. Moreover, to our knowledge, only a single study (Suzuki, Griffin, & Samuel, 2015) has examined the dependability of the PID-5, which is an essential component of construct validity for traits (Chmielewski & Watson, 2009; McCrae, Kurtz, Yamagata, & Terracciano, 2011). The current study directly compared the dependability of the DSM-5 traits, as assessed by the PID-5, and the traditional PD model, as assessed by the Personality Diagnostic Questionnaire-4 (PDQ-4+), in a large undergraduate sample. In addition, it evaluated and compared their associations with functioning, another essential component of personality pathology. In general, our findings indicate that most DSM-5 traits demonstrate high levels of dependability that are superior to the traditional PD model; however, some of the constructs assessed by the PID-5 may be more state like. The models were roughly equivalent in terms of their associations with functioning. The current results provide additional support for the validity of PID-5 and the DSM-5 Section III personality pathology model. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Neutrino masses in the SU(5) x (lower case x) SU(5)' mirror symmetric model

International Nuclear Information System (INIS)

Collie, M.; Foot, R.

1998-02-01

Motivated by the atmospheric and solar neutrino anomalies, we study neutrino masses in a parity invariant SU(5) x SU(5)' grand unified model. Two distinct ways of incorporating neutrino masses into this model are envisaged. One way involves adding a gauge singlet fermion to each generation. The other way, is to extend the scalar sector. This possibility suggests that photon - mirror photon kinetic mixing is non-zero since is generated radiatively. It is argued that the kinetic mixing is such models may well be close to the experimental limit

Subsurface Contamination Control

Energy Technology Data Exchange (ETDEWEB)

Y. Yuan

2001-12-12

subsurface repository; (2) provides a table of derived LRCL for nuclides of radiological importance; (3) Provides an as low as is reasonably achievable (ALARA) evaluation of the derived LRCL by comparing potential onsite and offsite doses to documented ALARA requirements; (4) Provides a method for estimating potential releases from a defective WP; (5) Provides an evaluation of potential radioactive releases from a defective WP that may become airborne and result in contamination of the subsurface facility; and (6) Provides a preliminary analysis of the detectability of a potential WP leak to support the design of an airborne release monitoring system.

Whole Prostate Volume and Shape Changes with the Use of an Inflatable and Flexible Endorectal Coil

International Nuclear Information System (INIS)

Osman, M.; Shebel, H.; Sankineni, S.; Bernardo, M.L.; Daar, D.; Choyke, P.L.; Turkbey, B.; Agarwal, H.K.; Osman, M.; Shebel, H.; Bernardo, M.L.; Wood, P.J.; Pinto, P.A.; Agarwal, H.K.

2014-01-01

To determine to what extent an inflatable endorectal coil (ERC) affects whole prostate (WP) volume and shape during prostate MRI. Materials and Methods. 79 consecutive patients underwent T2W MRI at 3T first with a 6-channel surface coil and then with the combination of a 16-channel surface coil and ERC in the same imaging session. WP volume was assessed by manually contouring the prostate in each T2W axial slice. PSA density was also calculated. The maximum anterior-posterior (AP), left-right (LR), and cranio caudal (CC) prostate dimensions were measured. Changes in WP prostate volume, PSA density, and prostate dimensions were then evaluated. Results. In 79 patients, use of an ERC yielded no significant change in whole prostate volume (0.6 ± 5.7 %, Ρ=0.270) and PSA density (-0.2 ±5.6%,Ρ=0.768 ). However, use of an ERC significantly decreased the AP dimension of the prostate by -8.6 ±7.8%(Ρ<0.001), increased LR dimension by 4.5 ± 5.8 %(Ρ<0.001), and increased the CC dimension by 8.8 ±6.9 %( Ρ<0.001). Conclusion. Use of an ERC in prostate MRI results in the shape deformation of the prostate gland with no significant change in the volume of the prostate measured on T2W MRI. Therefore, WP volumes calculated on ERC MRI can be reliably used in clinical work flow.

Nuclear structure and weak rates of heavy waiting point nuclei under rp-process conditions

Science.gov (United States)

Nabi, Jameel-Un; Böyükata, Mahmut

2017-01-01

The structure and the weak interaction mediated rates of the heavy waiting point (WP) nuclei 80Zr, 84Mo, 88Ru, 92Pd and 96Cd along N = Z line were studied within the interacting boson model-1 (IBM-1) and the proton-neutron quasi-particle random phase approximation (pn-QRPA). The energy levels of the N = Z WP nuclei were calculated by fitting the essential parameters of IBM-1 Hamiltonian and their geometric shapes were predicted by plotting potential energy surfaces (PESs). Half-lives, continuum electron capture rates, positron decay rates, electron capture cross sections of WP nuclei, energy rates of β-delayed protons and their emission probabilities were later calculated using the pn-QRPA. The calculated Gamow-Teller strength distributions were compared with previous calculation. We present positron decay and continuum electron capture rates on these WP nuclei under rp-process conditions using the same model. For the rp-process conditions, the calculated total weak rates are twice the Skyrme HF+BCS+QRPA rates for 80Zr. For remaining nuclei the two calculations compare well. The electron capture rates are significant and compete well with the corresponding positron decay rates under rp-process conditions. The finding of the present study supports that electron capture rates form an integral part of the weak rates under rp-process conditions and has an important role for the nuclear model calculations.

Water Productivity Mapping (WPM Using Landsat ETM+ Data for the Irrigated Croplands of the Syrdarya River Basin in Central Asia

Directory of Open Access Journals (Sweden)

Sabirjan Isaev

2008-12-01

Full Text Available The overarching goal of this paper was to espouse methods and protocols for water productivity mapping (WPM using high spatial resolution Landsat remote sensing data. In a world where land and water for agriculture are becoming increasingly scarce, growing “more crop per drop” (increasing water productivity becomes crucial for food security of future generations. The study used time-series Landsat ETM+ data to produce WPMs of irrigated crops, with emphasis on cotton in the Galaba study area in the Syrdarya river basin of Central Asia. The WPM methods and protocols using remote sensing data consisted of: (1 crop productivity (ton/ha maps (CPMs involvingcrop type classification, crop yield and biophysical modeling, and extrapolating yield models to larger areas using remotely sensed data; (2 crop water use (m3/ha maps (WUMs (or actual seasonal evapotranspiration or actual ET developed through Simplified Surface Energy Balance (SSEB model; and (3 water productivity (kg/m3 maps (WPMs produced by dividing raster layers of CPMs by WUMs. The SSEB model calculated WUMs (actual ET by multiplying the ET fractionby reference ET. The ETfraction was determined using Landsat thermal imagery by selecting the “hot” pixels (zero ET and “cold” pixels (maximum ET. The grass reference ET was calculated by FAO Penman-Monteith method using meteorological data. The WPMs for the Galaba study area demonstrated a wide variations (0-0.54 kg/m3 in water productivity of cotton fields with overwhelming proportion (87% of the area having WP less than 0.30 kg/m3, 11% of the area having WP in range of 0.30-0.36 kg/m3, and only 2% of the area with WP greater than 0.36 kg/m3. These results clearly imply that there are opportunities for significant WP increases in overwhelming proportion of the existing croplands. The areas of low WP are spatially pin-pointed and can be used as focus for WP improvements

Minnehaha Creek Watershed SWMM5 Model Data Analysis and Future Recommendations

Science.gov (United States)

2013-07-01

Water Bodies Organization 1 SWMM5 LMCW EPA 1 HEC - RAS Minnehaha Creek and Lake Minnetonka system HEC 2 CE-QUAL-W2 Lake Minnetonka system ERDC...and adjusted as needed to adequately address project goals and priorities. SWMM5 and HEC - RAS are the recommended Tier 1 models. The current SWMM5...model is an appropriate modeling platform for modeling subbasins in the LMCW. HEC - RAS should be used to model Minnehaha Creek and the Lake Minnetonka

Flipped SU(5) times U(1) in superconformal models

Energy Technology Data Exchange (ETDEWEB)

Bailin, D.; Katechou, E.K. (Sussex Univ., Brighton (United Kingdom). School of Mathematical and Physical Sciences); Love, A. (London Univ. (United Kingdom))

1992-01-10

This paper reports that flipped SU(5) {times} U(1) models are constructed in the framework of tensoring of N = 2 superconformal minimal models quotiented by discrete symmetries. Spontaneous breaking of flipped SU(5) {times} U(1) and extra U(1) factors in the gauge group along F-flat directions of the effective potential is studied.

Deliverable 4.1 Homogeneous LCA methodology agreed by NEPTUNE and INNOWATECH

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Hauschild, Michael Zwicky; Wenzel, Henrik

2007-01-01

In order to do a life cycle assessment (LCA) of a waste water treatment technique, a system to handle the mapped inventory data and a life cycle impact assessment (LCIA) method/model is needed. Besides NEPTUNE, another EU-funded project has the same methodology need namely INNOWATECH (contract No....... 036882) running in parallel with NEPTUNE but focusing on industrial waste water. With the aim of facilitating cooperation between the two projects a common LCA methodology framework has been worked out and is described in the following. This methodology work has been done as a joint effort between...... NEPTUNE WP4 and INNOWATECH WP4 represented by the WP4 lead partner IVL. The aim of the co-operation is to establish common methodologies and/or LCA models and/or tools in order to achieve a homogenous approach in INNOWATECH and NEPTUNE. Further, the aim is to facilitate possibilities of data exchange...

Is neutralino dark matter compatible with flipped SU(5) models

Energy Technology Data Exchange (ETDEWEB)

McDonald, J.

1989-07-13

We consider the possibility that the lightest supersymmetric particle in flipped SUSY SU(5)xU(1) models is cosmologically stable and corresponds to a neutralino. Previous studies of dark matter in flipped SUSY SU(5) models have suggested that the decay of the oscillations of the SU(5) breaking scalar field would result in too many neutralinos, if they are stable. We show that it is possible for an acceptable density of neutralinos to occur in the case where the neutralino corresponds to a light photino, if the temperature at the end of the oscillation dominated period is 5) models. Direct detection of dark matter in forthcoming experiments will therefore not eliminate this class of models. (orig.).

High Efficiency, Low Cost Parabolic Dish System for Cogeneration of Electricity and Heat

Science.gov (United States)

Chayet, Haim; Lozovsky, Ilan; Kost, Ori; Loeckenhoff, Ruediger; Rasch, Klaus-Dieter

2010-10-01

Highly efficient combined heat and power generating system based on CPV technology using unique dish design consisting of multiple simple flat mirrors mounted on a plastic parabolic surface. The dish of total aperture area of 11 m2 focuses 10.3 kWp onto a heat and electricity generating receiver. The receiver comprises a water cooled, dense triple junction cell array of 176 cm2 aperture area. A unique arrangement of the cells compensates for the non-uniformity of the reflected flux. Depending on the flow rate, the temperature of the hot water can be adjusted to suit from temperatures for domestic use, to temperatures suited for process heat. The output of 2.3 kWp electrical and 5.5 kWp thermal power from one dish system represent 20 to 21% electrical and 50% thermal conversion efficiency adding to 70% overall system efficiency.

Symmetry breaking in a five-dimensional SU(5) model

International Nuclear Information System (INIS)

Svetovoi, V.B.; Khariton, N.G.

1986-01-01

Two-state symmetry breaking in a SU(5) model in a space with M 4 x S 1 topology is discussed. The scalar 24-plet is a component of a five-vector and acquires a nonzero vacuum expectation value at the quantum level. The vacuum differs substantially from that of the standard SU(5) model. Its orientation in the SU(5) space and absolute magnitude are fixed uniquely. The second stage of the symmetry breaking occurs on account of a five-scalar in the fundamental representation of SU(5) by means of the Weinberg mechanism. The small mass of the scalar SU(2) doublet is not explained

Capturing the DSM-5 Alternative Personality Disorder Model Traits in the Five-Factor Model's Nomological Net.

Science.gov (United States)

Suzuki, Takakuni; Griffin, Sarah A; Samuel, Douglas B

2017-04-01

Several studies have shown structural and statistical similarities between the Diagnostic and Statistical Manual of Mental Disorders (5th ed.; DSM-5) alternative personality disorder model and the Five-Factor Model (FFM). However, no study to date has evaluated the nomological network similarities between the two models. The relations of the Revised NEO Personality Inventory (NEO PI-R) and the Personality Inventory for DSM-5 (PID-5) with relevant criterion variables were examined in a sample of 336 undergraduate students (M age  = 19.4; 59.8% female). The resulting profiles for each instrument were statistically compared for similarity. Four of the five domains of the two models have highly similar nomological networks, with the exception being FFM Openness to Experience and PID-5 Psychoticism. Further probing of that pair suggested that the NEO PI-R domain scores obscured meaningful similarity between PID-5 Psychoticism and specific aspects and lower-order facets of Openness. The results support the notion that the DSM-5 alternative personality disorder model trait domains represent variants of the FFM domains. Similarities of Openness and Psychoticism domains were supported when the lower-order aspects and facets of Openness domain were considered. The findings support the view that the DSM-5 trait model represents an instantiation of the FFM. © 2015 Wiley Periodicals, Inc.

Surface wave propagation effects on buried segmented pipelines

Directory of Open Access Journals (Sweden)

Peixin Shi

2015-08-01

Full Text Available This paper deals with surface wave propagation (WP effects on buried segmented pipelines. Both simplified analytical model and finite element (FE model are developed for estimating the axial joint pullout movement of jointed concrete cylinder pipelines (JCCPs of which the joints have a brittle tensile failure mode under the surface WP effects. The models account for the effects of peak ground velocity (PGV, WP velocity, predominant period of seismic excitation, shear transfer between soil and pipelines, axial stiffness of pipelines, joint characteristics, and cracking strain of concrete mortar. FE simulation of the JCCP interaction with surface waves recorded during the 1985 Michoacan earthquake results in joint pullout movement, which is consistent with the field observations. The models are expanded to estimate the joint axial pullout movement of cast iron (CI pipelines of which the joints have a ductile tensile failure mode. Simplified analytical equation and FE model are developed for estimating the joint pullout movement of CI pipelines. The joint pullout movement of the CI pipelines is mainly affected by the variability of the joint tensile capacity and accumulates at local weak joints in the pipeline.

Dynamic modeling of the manipulator RD5NT

Directory of Open Access Journals (Sweden)

Eduardo Monteiro Aguiar

2015-05-01

Full Text Available This article presents the development of a dynamicmathematical model for the DIDACTA ITALIARD5NT manipulator. The model is intendedto be used in the development of strategies ofposition-trajectory control. The choice modelingtype aims at identifying the physical parametersof the manipulator.

Heterozygous CDKL5 Knockout Female Mice Are a Valuable Animal Model for CDKL5 Disorder

OpenAIRE

Fuchs, Claudia; Gennaccaro, Laura; Trazzi, Stefania; Bastianini, Stefano; Bettini, Simone; Martire, Viviana Lo; Ren, Elisa; Medici, Giorgio; Zoccoli, Giovanna; Rimondini, Roberto; Ciani, Elisabetta

2018-01-01

CDKL5 disorder is a severe neurodevelopmental disorder caused by mutations in the X-linked CDKL5 (cyclin-dependent kinase-like five) gene. CDKL5 disorder primarily affects girls and is characterized by early-onset epileptic seizures, gross motor impairment, intellectual disability, and autistic features. Although all CDKL5 female patients are heterozygous, the most valid disease-related model, the heterozygous female Cdkl5 knockout (Cdkl5 +/−) mouse, has been little characterized. The lack of...

Summary description of the RELAP5 Koeberg-1 simulation model

International Nuclear Information System (INIS)

D'Arcy, A.J.

1990-11-01

The main features of the RELAP5 code and the model are summarized. The model has been quality-assured in accordance with a QA programme used in the Reactor Theory Group of the Atomic Energy Corporation of SA Ltd. The RELAP5 code is based on a non-homogeneous, non-equilibrium model for the two-phase system that is solved by a fast, partially implicit numerical scheme. The objective of the development effort from the outset has been to produce a code that includes important first-order effects necessary for accurate prediction of system transients, but is sufficiently simple and cost-effective so that parametric or sensitivity studies are possible. The code includes many generic component models from which general systems can be simulated. Special process models are included for effects such as form losses, flow at an abrupt area change, branching, choked flow, boron tracking and a non-condensible gas. The RELAP5 modelling and computational aspects covered are: hydrodynamic models, constitutive package, special process models, and user conveniences. 25 tabs., 8 figs., 17 refs

Sistem Pendukung Keputusan Pemilihan Perguruan Tinggi Swasta Terbaik Jurusan Komputer Menggunakan Metode Weighted Product dan Weighted Sum Model (Studi Kasus : Perguruan Tinggi Swasta)

OpenAIRE

Tampubolon, Meabeng

2016-01-01

Decision support system (DSS) is a system that can assist a person in making decisions more effectively and efficiently. Given this system, problems faced can be solved, such as the determination of the best private universities. There beberpa methods that can be used in building a Weighted Method SPK like product and weighted sum models. Methods weighted product (WP) use multiplication to connect rating attributes, where each rating should be used with attribute weights pangka...

RELAP5-3D Code Includes ATHENA Features and Models

International Nuclear Information System (INIS)

Riemke, Richard A.; Davis, Cliff B.; Schultz, Richard R.

2006-01-01

Version 2.3 of the RELAP5-3D computer program includes all features and models previously available only in the ATHENA version of the code. These include the addition of new working fluids (i.e., ammonia, blood, carbon dioxide, glycerol, helium, hydrogen, lead-bismuth, lithium, lithium-lead, nitrogen, potassium, sodium, and sodium-potassium) and a magnetohydrodynamic model that expands the capability of the code to model many more thermal-hydraulic systems. In addition to the new working fluids along with the standard working fluid water, one or more noncondensable gases (e.g., air, argon, carbon dioxide, carbon monoxide, helium, hydrogen, krypton, nitrogen, oxygen, SF 6 , xenon) can be specified as part of the vapor/gas phase of the working fluid. These noncondensable gases were in previous versions of RELAP5-3D. Recently four molten salts have been added as working fluids to RELAP5-3D Version 2.4, which has had limited release. These molten salts will be in RELAP5-3D Version 2.5, which will have a general release like RELAP5-3D Version 2.3. Applications that use these new features and models are discussed in this paper. (authors)

Text Comprehension and Oral Language as Predictors of Word-Problem Solving: Insights into Word-Problem Solving as a Form of Text Comprehension.

Science.gov (United States)

Fuchs, Lynn S; Gilbert, Jennifer K; Fuchs, Douglas; Seethaler, Pamela M; Martin, BrittanyLee N

2018-01-01

This study was designed to deepen insights on whether word-problem (WP) solving is a form of text comprehension (TC) and on the role of language in WPs. A sample of 325 second graders, representing high, average, and low reading and math performance, was assessed on (a) start-of-year TC, WP skill, language, nonlinguistic reasoning, working memory, and foundational skill (word identification, arithmetic) and (b) year-end WP solving, WP-language processing (understanding WP statements, without calculation demands), and calculations. Multivariate, multilevel path analysis, accounting for classroom and school effects, indicated that TC was a significant and comparably strong predictor of all outcomes. Start-of-year language was a significantly stronger predictor of both year-end WP outcomes than of calculations, whereas start-of-year arithmetic was a significantly stronger predictor of calculations than of either WP measure. Implications are discussed in terms of WP solving as a form of TC and a theoretically coordinated approach, focused on language, for addressing TC and WP-solving instruction.

4"t"h Annual workshop proceedings of the collaborative project ''Redox phenomena controlling systems'' (7"t"h EC FP CP RECOSY)

International Nuclear Information System (INIS)

Altmaier, Marcus; Kienzler, Bernhard; Duro, Lara; Grive, Mireia; Montoya, Vanessa

2012-01-01

The EURATOM 7"t"h EC Framework Program Collaborative Project REdox phenomena Controlling SYstems (RECOSY) started in April 2008 and extends over 4 years. Although redox is not a new geochemical issue, different questions are still not resolved. For this reason, main objectives of RECOSY project are a) the sound understanding of redox phenomena controlling the long-term release/retention of radionuclides in nuclear waste disposal, b) providing tools to apply the result to Performance Assessment/Safety Case, c) training of next generation and d) documentation and communication of the results. To this aim, the project set up a consortium of 32 Beneficiaries/Contractors and 6 Associated Groups. The consortium includes key European Research Institutes, Universities, National Waste Management Agencies and SMEs, from 13 EURATOM signatory states, Russia, Japan, Korea, USA and one European Joint Research Centre. The ReCosy concept is innovative in the scientific approach to the redox phenomena. It includes i) advanced analytical tools, ii) investigations of processes responsible for redox control (thermodynamically and kinetically controlled processes, surface reactions and microbial processes,..), iii) provision of required data on redox controlling processes, and iv) response to disturbances in disposal systems. The work program is structured along six RTD workpackages (WP1-6). They cover near-field and far field aspects as well as all relevant host-rocks considered in Europe. In WP1, the scientific state-of-the-art and its application to Performance Assessment/Safety Case is documented and regularly updated. WP2 focuses on development of redox determination methods. WP3 focuses on redox response of defined and near-natural systems. WP4 studies the redox reactions of radionuclides. WP5 focuses on Redox processes in radionuclide transport and WP6 deals with redox reactions affecting the spent fuel source-term. Specific workpackages on knowledge management, education and

4{sup th} Annual workshop proceedings of the collaborative project ''Redox phenomena controlling systems'' (7{sup th} EC FP CP RECOSY)

Energy Technology Data Exchange (ETDEWEB)

Altmaier, Marcus; Kienzler, Bernhard; Duro, Lara; Grive, Mireia; Montoya, Vanessa (eds.)

2012-07-01

The EURATOM 7{sup th} EC Framework Program Collaborative Project REdox phenomena Controlling SYstems (RECOSY) started in April 2008 and extends over 4 years. Although redox is not a new geochemical issue, different questions are still not resolved. For this reason, main objectives of RECOSY project are a) the sound understanding of redox phenomena controlling the long-term release/retention of radionuclides in nuclear waste disposal, b) providing tools to apply the result to Performance Assessment/Safety Case, c) training of next generation and d) documentation and communication of the results. To this aim, the project set up a consortium of 32 Beneficiaries/Contractors and 6 Associated Groups. The consortium includes key European Research Institutes, Universities, National Waste Management Agencies and SMEs, from 13 EURATOM signatory states, Russia, Japan, Korea, USA and one European Joint Research Centre. The ReCosy concept is innovative in the scientific approach to the redox phenomena. It includes i) advanced analytical tools, ii) investigations of processes responsible for redox control (thermodynamically and kinetically controlled processes, surface reactions and microbial processes,..), iii) provision of required data on redox controlling processes, and iv) response to disturbances in disposal systems. The work program is structured along six RTD workpackages (WP1-6). They cover near-field and far field aspects as well as all relevant host-rocks considered in Europe. In WP1, the scientific state-of-the-art and its application to Performance Assessment/Safety Case is documented and regularly updated. WP2 focuses on development of redox determination methods. WP3 focuses on redox response of defined and near-natural systems. WP4 studies the redox reactions of radionuclides. WP5 focuses on Redox processes in radionuclide transport and WP6 deals with redox reactions affecting the spent fuel source-term. Specific workpackages on knowledge management, education

Dimensional models of personality: the five-factor model and the DSM-5

Science.gov (United States)

Trull, Timothy J.; Widiger, Thomas A.

2013-01-01

It is evident that the classification of personality disorder is shifting toward a dimensional trait model and, more specifically, the five-factor model (FFM). The purpose of this paper is to provide an overview of the FFM of personality disorder. It will begin with a description of this dimensional model of normal and abnormal personality functioning, followed by a comparison with a proposal for future revisions to DSM-5 and a discussion of its potential advantages as an integrative hierarchical model of normal and abnormal personality structure. PMID:24174888

Clinical Utility of the DSM-5 Alternative Model of Personality Disorders

DEFF Research Database (Denmark)

Bach, Bo; Markon, Kristian; Simonsen, Erik

2015-01-01

In Section III, Emerging Measures and Models, DSM-5 presents an Alternative Model of Personality Disorders, which is an empirically based model of personality pathology measured with the Level of Personality Functioning Scale (LPFS) and the Personality Inventory for DSM-5 (PID-5). These novel...... instruments assess level of personality impairment and pathological traits. Objective. A number of studies have supported the psychometric qualities of the LPFS and the PID-5, but the utility of these instruments in clinical assessment and treatment has not been extensively evaluated. The goal of this study...... was to evaluate the clinical utility of this alternative model of personality disorders. Method. We administered the LPFS and the PID-5 to psychiatric outpatients diagnosed with personality disorders and other nonpsychotic disorders. The personality profiles of six characteristic patients were inspected...

Development of a Biofungicide Using a Mycoparasitic Fungus Simplicillium lamellicola BCP and Its Control Efficacy against Gray Mold Diseases of Tomato and Ginseng

Directory of Open Access Journals (Sweden)

Teak Soo Shin

2017-06-01

Full Text Available To develop a commercial product using the mycoparasitic fungus Simplicillium lamellicola BCP, the scaleup of conidia production from a 5-l jar to a 5,000-l pilot bioreactor, optimization of the freeze-drying of the fermentation broth, and preparation of a wettable powder-type formulation were performed. Then, its disease control efficacy was evaluated against gray mold diseases of tomato and ginseng plants in field conditions. The final conidial yields of S. lamellicola BCP were 3.3 × 10⁸ conidia/ml for a 5-l jar, 3.5 × 10⁸ conidia/ml for a 500-l pilot vessel, and 3.1 × 10⁸ conidia/ml for a 5,000-l pilot bioreactor. The conidial yield in the 5,000-l pilot bioreactor was comparable to that in the 5-l jar and 500-l pilot vessel. On the other hand, the highest conidial viability of 86% was obtained by the freeze-drying method using an additive combination of lactose, trehalose, soybean meal, and glycerin. Using the freeze-dried sample, a wettable powder-type formulation (active ingredient 10%; BCP-WP10 was prepared. A conidial viability of more than 50% was maintained in BCP-WP10 until 22 weeks for storage at 40°C. BCP-WP10 effectively suppressed the development of gray mold disease on tomato with control efficacies of 64.7% and 82.6% at 500- and 250-fold dilutions, respectively. It also reduced the incidence of gray mold on ginseng by 65.6% and 81.3% at 500- and 250-fold dilutions, respectively. The results indicated that the new microbial fungicide BCP-WP10 can be used widely to control gray mold diseases of various crops including tomato and ginseng.

Prospects of solar photovoltaic–micro-wind based hybrid power systems in western Himalayan state of Himachal Pradesh in India

International Nuclear Information System (INIS)

Sinha, Sunanda; Chandel, S.S.

2015-01-01

Highlights: • Good prospects of PV–wind hybrid systems are found in western Himalayan Indian state. • A 6 kWp roof mounted PV–micro wind hybrid system at Hamirpur location is studied. • Optimum PV–wind hybrid system configurations are determined for 12 locations in the region. • Comparative analysis of hybrid systems is carried out using ANN, NASA and measured data. • Methodology can be used for assessing the potential of hybrid power systems worldwide. - Abstract: The western Himalayan state of Himachal Pradesh is known as the hydro-power state of India with associated social and environmental problems of large hydro power plants. The reduced water inflow in the rivers during extreme winters affects power generation in the state. Therefore solar and wind resources need to be utilized to supplement power generation requirements. With this objective the prospects of photovoltaic–micro wind based hybrid systems are studied for 12 locations of the state. The NASA data, Artificial Neural Network predicted and ground measured data are used in the analysis of Hamirpur location whereas for remaining 11 locations estimated, NASA and Artificial Neural Network predicted data are used, as measured solar and wind data are not available for most of the locations in the state. Root Mean Square Error between three input data types are found to range from 0.08 to 1.89. The results show that ANN predicted data are close to measured/estimated data. A 6 kWp roof mounted photovoltaic–micro wind hybrid system at Hamirpur with daily average energy demand of 5.2 kWh/day is studied. This system specifications are used to obtain optimum PV–micro wind based hybrid power system configurations for all locations. The optimum configuration for Hamirpur is found to be a 5 kWp micro wind turbine, 2 kW converter, 10 batteries and 8 kWp PV system whereas for other 11 locations a 5 kWp micro wind turbine, 2 kW converter, 10 batteries and 2–9 kWp PV systems are obtained. The

RELAP5/MOD3 code manual. Volume 4, Models and correlations

International Nuclear Information System (INIS)

1995-08-01

The RELAP5 code has been developed for best-estimate transient simulation of light water reactor coolant systems during postulated accidents. The code models the coupled behavior of the reactor coolant system and the core for loss-of-coolant accidents and operational transients such as anticipated transient without scram, loss of offsite power, loss of feedwater, and loss of flow. A generic modeling approach is used that permits simulating a variety of thermal hydraulic systems. Control system and secondary system components are included to permit modeling of plant controls, turbines, condensers, and secondary feedwater systems. RELAP5/MOD3 code documentation is divided into seven volumes: Volume I presents modeling theory and associated numerical schemes; Volume II details instructions for code application and input data preparation; Volume III presents the results of developmental assessment cases that demonstrate and verify the models used in the code; Volume IV discusses in detail RELAP5 models and correlations; Volume V presents guidelines that have evolved over the past several years through the use of the RELAP5 code; Volume VI discusses the numerical scheme used in RELAP5; and Volume VII presents a collection of independent assessment calculations

Wind Atlas for South Africa (WASA). Report on Measurements

DEFF Research Database (Denmark)

Mabille, Eugéne; Prinsloo, Eric; Mortensen, Niels Gylling

, to verify the results of the meso-scale modelling. The Measurements work package (WP2) is one of six work packages that collectively make up the Wind Atlas for South Africa (WASA) project. The measurements also provide observed wind climates at the measurement sites, which can be used by micrositing...... to be commissioned was WM06 (Sutherland) and this was completed on 17 September 2010. The outputs of WP2 are: i. Establish 10 high quality wind measurement stations providing three years of measurement data for calibration of the mesoscale modelling. ii. A database system for wind data collection and on-line Web...

Infrastructure Upgrades to Support Model Longevity and New Applications: The Variable Infiltration Capacity Model Version 5.0 (VIC 5.0)

Science.gov (United States)

Nijssen, B.; Hamman, J.; Bohn, T. J.

2015-12-01

The Variable Infiltration Capacity (VIC) model is a macro-scale semi-distributed hydrologic model. VIC development began in the early 1990s and it has been used extensively, applied from basin to global scales. VIC has been applied in a many use cases, including the construction of hydrologic data sets, trend analysis, data evaluation and assimilation, forecasting, coupled climate modeling, and climate change impact analysis. Ongoing applications of the VIC model include the University of Washington's drought monitor and forecast systems, and NASA's land data assimilation systems. The development of VIC version 5.0 focused on reconfiguring the legacy VIC source code to support a wider range of modern modeling applications. The VIC source code has been moved to a public Github repository to encourage participation by the model development community-at-large. The reconfiguration has separated the physical core of the model from the driver, which is responsible for memory allocation, pre- and post-processing and I/O. VIC 5.0 includes four drivers that use the same physical model core: classic, image, CESM, and Python. The classic driver supports legacy VIC configurations and runs in the traditional time-before-space configuration. The image driver includes a space-before-time configuration, netCDF I/O, and uses MPI for parallel processing. This configuration facilitates the direct coupling of streamflow routing, reservoir, and irrigation processes within VIC. The image driver is the foundation of the CESM driver; which couples VIC to CESM's CPL7 and a prognostic atmosphere. Finally, we have added a Python driver that provides access to the functions and datatypes of VIC's physical core from a Python interface. This presentation demonstrates how reconfiguring legacy source code extends the life and applicability of a research model.

Environmental species sorting dominates forest-bird community assembly across scales.

Science.gov (United States)

Özkan, Korhan; Svenning, Jens-Christian; Jeppesen, Erik

2013-01-01

Environmental species sorting and dispersal are seen as key factors in community assembly, but their relative importance and scale dependence remain uncertain, as the extent to which communities are consistently assembled throughout their biomes. To address these issues, we analysed bird metacommunity structure in a 1200-km(2) forested landscape (Istranca Forests) in Turkish Thrace at the margin of the Western Palaearctic (WP) temperate-forest biome. First, we used spatial regressions and Mantel tests to assess the relative importance of environmental and spatial factors as drivers of local species richness and composition within the metacommunity. Second, we analysed species' abundance-occupancy relationship across the metacommunity and used null models to assess whether occupancy is determined by species' environmental niches. Third, we used generalized linear models to test for links between species' metacommunity-wide occupancy and their broader WP regional populations and assessed whether these links are consistent with environmental species sorting. There was strong environmental control on local species richness and composition patterns within the metacommunity, but non-environmental spatial factors had also an important joint role. Null model analyses on randomized communities showed that species' occupancy across the metacommunity was strongly determined by species' environmental niches, with occupancy being related to niche position marginality. Species' metacommunity-wide occupancy correlated with their local abundance as well as with their range size and total abundance for the whole WP, suggesting that the same assembly mechanisms act consistently across local to regional scales. A species specialization index that was estimated by bird species' habitat use across France, incorporating both niche position and breadth, was significantly related to species' occupancy and abundance at both metacommunity and WP regional scales. Hence, the same niche

A Family Study of the DSM-5 Section III Personality Pathology Model Using the Personality Inventory for the DSM-5 (PID-5).

Science.gov (United States)

Katz, Andrea C; Hee, Danelle; Hooker, Christine I; Shankman, Stewart A

2017-10-03

In Section III of the DSM-5, the American Psychiatric Association (APA) proposes a pathological personality trait model of personality disorders. The recommended assessment instrument is the Personality Inventory for the DSM-5 (PID-5), an empirically derived scale that assesses personality pathology along five domains and 25 facets. Although the PID-5 demonstrates strong convergent validity with other personality measures, no study has examined whether it identifies traits that run in families, another important step toward validating the DSM-5's dimensional model. Using a family study method, we investigated familial associations of PID-5 domain and facet scores in 195 families, examining associations between parents and offspring and across siblings. The Psychoticism, Antagonism, and Detachment domains showed significant familial aggregation, as did facets of Negative Affect and Disinhibition. Results are discussed in the context of personality pathology and family study methodology. The results also help validate the PID-5, given the familial nature of personality traits.

PENGEMBANGAN PERANGKAT PEMBELAJARAN IPA MODEL 5E DI SMP

Directory of Open Access Journals (Sweden)

Hairul Anwar

2016-02-01

Kata kunci: perangkat pembelajaran IPA, model 5E, penelitian pengembangan THE DEVELOPMENT OF 5E MODEL OF SCIENCE TEACHING KITS IN JUNIOR HIGH SCHOOL Abstract: The purpose of this study was to develop the 5E model science teaching kits in Junior High School 2 Kopang. This was a research and development study referring to Dick and Carey model. The formative evaluation stage wasdone by: (1 the validation of the kitsby 3 experts and 1 teacher as users, (2 the limited trial on the teaching kits (syllabus, lesson plan, and students’ worksheets held in grade VII, and (3 the validation of the assessment instrument (Science Process Skills/SPS test, Cognitive Achievement/CA test and Affective Achievement/AA questionnaires held in VIII. The average score of the validation result showed that all teaching kits were suitable to be used in the limited trial. The use of the teaching kits (syllabus and lesson plan in the limited trial obtainedpositive responses from the teacher of grade VII as the observer with an average score of 4.20 and “strongly-agree” responses from students with an average score 4.12. The students also showed strong agreement on the worksheets with an average score of 4.14. The result of the validity and reliability test on the instrument showed that all the items of the SPS test, those of the CA test, and those of the AA questionnaires were valid. The Cronbach’s alpha reliability coefficient was > 0.423. Keywords: science teachingkits, the 5E model, research and development

Assessment of Agricultural Water Productivity for Tea Production in Tea Fields of Guilan Province

Directory of Open Access Journals (Sweden)

kourosh majdsalimi

2016-05-01

Full Text Available Water productivity index is one of the main factors in efficient use of water for agricultural products. In this study, the rate of water productivity (WP in six irrigated tea fields and three rainfed (no irrigation were assessed by farmer’s management for two years (2009-2010. Yield of each tea field in successive harvests, soil moisture monitoring by gravimetric soil and use of water balance equation was conducted during the growing seasons. Volume of water entered to irrigation system and amount of water reached to surface level were also measured. Tea mean yield in irrigated and rainfed field were 2843 and 1095 Kg. ha-1, respectively. Average of gross irrigation and effective rainfall (WP and irrigation water productivity (IWP in the irrigated fields were 4.39 and 4.55 kg (made tea ha-1 mm-1 and average of net WP (actual evaportanspiration and net IWP was 5.18 and 6.61 kg ha-1 mm-1, respectively. Average WP in rainfed tea fields was 3.4 kg ha-1 for each mm of effective rainfall. The most effective factors on WP reduction in tea fields were improper harvesting operations (un standard plucking and economic problems. Moreover, improper operation and maintenance and old irrigation systems and unprincipled irrigation scheduling in irrigated tea fields were also effective on WP reduction. Comparing the results of this study with other studies in past, showed that by implementing the proper methods in irrigation management and appropriate agricultural practices can improve water productivity in tea fields.

Eight weeks of pre- and postexercise whey protein supplementation increases lean body mass and improves performance in Division III collegiate female basketball players.

Science.gov (United States)

Taylor, Lemuel W; Wilborn, Colin; Roberts, Michael D; White, Andrew; Dugan, Kristen

2016-03-01

We examined if 8 weeks of whey protein (WP) supplementation improved body composition and performance measures in NCAA Division III female basketball players. Subjects were assigned to consume 24 g WP (n = 8; age, 20 ± 2 years; height, 170 ± 6 cm; weight, 66.0 ± 3.1 kg) or 24 g of maltodextrin (MD) (n = 6; age, 21 ± 3 years; height, 169 ± 6 cm; weight, 68.2 ± 7.6 kg) immediately prior to and following training (4 days/week anaerobic and resistance training) for 8 weeks. Prior to (T1) and 8 weeks following supplementation (T2), subjects underwent dual X-ray absorptiometry body composition assessment as well as performance tests. The WP group gained lean mass from T1 to T2 (+1.4 kg, p = 0.003) whereas the MD group trended to gain lean mass (+0.4 kg, p = 0.095). The WP group also lost fat mass from T1 to T2 (-1.0 kg, p = 0.003) whereas the MD group did not (-0.5 kg, p = 0.41). The WP group presented greater gains in 1-repetition maximum (1RM) bench press (+4.9 kg) compared with the MD group (+2.3 kg) (p agility from T1 to T2 (p = 0.001) whereas the MD group did not (p = 0.38). Both groups equally increased leg press 1RM, vertical jump, and broad jump performances. This study demonstrates that 8 weeks of WP supplementation improves body composition and select performance variables in previously trained female athletes.

Air and Water Processes Do Not Produce the Same High-Quality Pasteurization of Donor Human Milk.

Science.gov (United States)

Buffin, Rachel; Pradat, Pierre; Trompette, Jocelyne; Ndiaye, Isabelle; Basson, Eliane; Jordan, Isabelle; Picaud, Jean-Charles

2017-11-01

Holder pasteurization is the most commonly used technique in milk banks worldwide, but higher temperatures and longer pasteurization time have been associated with damage to the immune components of human milk. Research aim: This study aimed to assess the detailed pattern of pasteurization temperature using two water pasteurizers (WP1 and WP2) and one air pasteurizer (AP). The milk temperature during each phase of the pasteurization cycle was recorded using 6 to 9 probes, depending on the number of bottles, in the pasteurizers. We used 90 to 200 ml bottles to assess the effect of volume on milk temperature. The time to heat the milk from room temperature to 58°C was 12.4, 12.9, and 64.5 min, respectively, for WP1, WP2, and the AP ( p pasteurizer in our study was exposed to higher temperatures and for longer periods of time than the water pasteurizers we employed. Regular qualification of pasteurizers is requested when evaluating the effect of pasteurization on milk components and for routine treatment of human milk in milk banks.

Text Comprehension and Oral Language as Predictors of Word-Problem Solving: Insights into Word-Problem Solving as a Form of Text Comprehension

Science.gov (United States)

Fuchs, Lynn S.; Gilbert, Jennifer K.; Fuchs, Douglas; Seethaler, Pamela M.; Martin, BrittanyLee N.

2018-01-01

This study was designed to deepen insights on whether word-problem (WP) solving is a form of text comprehension (TC) and on the role of language in WPs. A sample of 325 second graders, representing high, average, and low reading and math performance, was assessed on (a) start-of-year TC, WP skill, language, nonlinguistic reasoning, working memory, and foundational skill (word identification, arithmetic) and (b) year-end WP solving, WP-language processing (understanding WP statements, without calculation demands), and calculations. Multivariate, multilevel path analysis, accounting for classroom and school effects, indicated that TC was a significant and comparably strong predictor of all outcomes. Start-of-year language was a significantly stronger predictor of both year-end WP outcomes than of calculations, whereas start-of-year arithmetic was a significantly stronger predictor of calculations than of either WP measure. Implications are discussed in terms of WP solving as a form of TC and a theoretically coordinated approach, focused on language, for addressing TC and WP-solving instruction. PMID:29643723

Radiation-induced mutagenicity and lethality in tryptophan-requiring auxotrophs of escherichia coli

International Nuclear Information System (INIS)

Xu Rong; Qian Hongwei; Yao Fenying; Gu Shuzhu; Xu Jiaxin; Bi Hekan; Liu Yuying

1989-01-01

Mutation and killing caused by X-ray radiation and 60 Co γ-ray radiation were studied in three different tryptophan-requiring auxotrophs (WP2, Wp2A, Cm 891) of Escherichia coli. These testers are sensitive to base pair substitution mutagens. Cm891 carries a R-factor and is more sensitive than WP2 and WP2A to radiation-induced mutation and lethality. The results of the study show that (1) ionizing radiation was mutagenic to E. coli, (2) the order of mutagenic sensitivity among three strains to ionizing radiation was Cm891 > WP2A > WP2, (3) the dose rate of γ-ray influences mutagenicity and lethalty of E. coli strain, (4) the toxicity and mutagenicity of γ-ray were similar to X-ray when Cm891 was tested, however, γ-ray was more toxic and mutagenic than X-ray to WP2A ang WP2

REACH Compliant Hexavalent Chrome Replacement for Corrosion Protection (HITEA)

Science.gov (United States)

2014-11-01

is September 2017. 2 Engine Guide Vane Actuator Aluminium Housing •Forged / Make from Solid •Chromic acid anodised (CAA) externally. Aluminium Piston...included an effective material information management system based on the GRANTA MI TM. • The project benefits from an Advisory Board. 5 WP 1 Alloy ...Tests include: B117, G85 Dry and wet film adhesion Fatigue testing 7 WP 2 Low alloy steel 15%Cr Stainless steel 19% Cr Stainless steel Ti64 Al

RELAP5/MOD2 models and correlations

International Nuclear Information System (INIS)

Dimenna, R.A.; Larson, J.R.; Johnson, R.W.; Larson, T.K.; Miller, C.S.; Streit, J.E.; Hanson, R.G.; Kiser, D.M.

1988-08-01

A review of the RELAP5/MOD2 computer code has been performed to assess the basis for the models and correlations comprising the code. The review has included verification of the original data base, including thermodynamic, thermal-hydraulic, and geothermal conditions; simplifying assumptions in implementation or application; and accuracy of implementation compared to documented descriptions of each of the models. An effort has been made to provide the reader with an understanding of what is in the code and why it is there and to provide enough information that an analyst can assess the impact of the correlation or model on the ability of the code to represent the physics of a reactor transient. Where assessment of the implemented versions of the models or correlations has been accomplished and published, the assessment results have been included

Validation of AquaCrop Model for Simulation of Winter Wheat Yield and Water Use Efficiency under Simultaneous Salinity and Water Stress

Directory of Open Access Journals (Sweden)

M. Mohammadi

2016-02-01

Full Text Available Introduction: FAO AquaCrop model (Raes et al., 2009a; Steduto et al., 2009 is a user-friendly and practitioner oriented type of model, because it maintains an optimal balance between accuracy, robustness, and simplicity; and it requires a relatively small number of model input parameters. The FAO AquaCrop model predicts crop productivity, water requirement, and water use efficiency under water-limiting and saline water conditions. This model has been tested and validated for different crops such as maize, sunflower and wheat (T. aestivum L. under diverse environments. In most of arid and semi-arid regions water shortage is associated with reduction in water quality (i.e. increasing salinity. Plants in these regions in terms of water quality and quantity may be affected by simultaneous salinity and water stress. Therefore, in this study, the AquaCrop model was evaluated under simultaneous salinity and water stress. In this study, AquaCrop Model (v4.0 was used. This version was developed in 2012 to quantify the effects of salinity. Therefore, the objectives of this study were: i evaluation of AquaCrop model (v4.0 to simulate wheat yield and water use efficiency under simultaneous salinity and water stress conditions in an arid region of Birjand, Iran and ii Using different treatments for nested calibration and validation of AquaCrop model. Materials and Methods: This study was carried out as split plot design (factorial form in Birjand, east of Iran, in order to evaluate the AquaCrop model.Treatments consisted of three levels of irrigation water salinity (S1, S2, S3 corresponding to 1.4, 4.5, 9.6 dS m-1 as main plot, two wheat varieties (Ghods and Roshan, and four levels of irrigation water amount (I1, I2, I3, I4 corresponding to 125, 100, 75, 50% water requirement as sub plot. First, AquaCrop model was run with the corresponding data of S1 treatments (for all I1, I2, I3, and I4 and the results (wheat grain yield, average of soil water content

Agent-Based Modelling applied to 5D model of the HIV infection

Directory of Open Access Journals (Sweden)

Toufik Laroum

2016-12-01

The simplest model was the 3D mathematical model. But the complexity of this phenomenon and the diversity of cells and actors which affect its evolution requires the use of new approaches such as multi-agents approach that we have applied in this paper. The results of our simulator on the 5D model are promising because they are consistent with biological knowledge’s. Therefore, the proposed approach is well appropriate to the study of population dynamics in general and could help to understand and predict the dynamics of HIV infection.

Geochemical Interactions in failed Co-Disposal Waste Packages for N Reactor and Ft. St. Vrain Spent Fuel and the Melt and Dilute Waste Form

International Nuclear Information System (INIS)

Arthur, S.E.; McNeish, J.

2002-01-01

The objective of this scientific analysis is to calculate the long-term geochemical behavior in a failed co-disposal waste package (WP) containing U. S. Department of Energy (DOE) spent nuclear fuel (SNF) and high level waste (HLW) glass. This analysis was prepared according to a Technical Work Plan (BSC 2002). Specifically the scope of these calculations is to determine: (1) The geochemical characteristics of the fluids inside the WP after breach, including the corrosion/dissolution of the initial WP configuration; (2) The transport of radionuclides of concern to performance assessment out of the degraded WP by infiltrating water; and (3) The range of parameter variation for additional laboratory and numerical evaluations. This analysis is limited to three SNF groups, uranium (U)/thorium (Th) carbide SNF (Group 5), U metal SNF (Group 7), and aluminum(Al)-based fuels (Group 9). Group 5 is represented by Ft. St. Vrain (FSV) U/Th carbide SNF, Group 7 is represented by N-Reactor U metal SNF, and Group 9 is represented by the Melt and Dilute (MandD) waste form developed from Al-based SNF. The DOE (2001a, Appendix A) describes all of these fuels. Table 1 shows the groups of DOE SNF, the representative SNF for each group, and the metric tons of heavy metal (MTHM) of SNF in each group

Metrology for radioactive waste management. (WP2, WP3)

International Nuclear Information System (INIS)

Suran, J.

2014-01-01

The three-year European research project M etrology for Radioactive Waste Management' was launched in October 2011 under the EMRP (European Metrology Research Programme). It involves 13 European national metrology institutes and a total budget exceeds four million Euros. The project is coordinated by the Czech Metrology Institute and is divided into five working groups. In this presentation the Project is described. (author)

Effects of metal-rich particulate matter exposure on exogenous and endogenous viral sequence methylation in healthy steel-workers.

Science.gov (United States)

Mercorio, Roberta; Bonzini, Matteo; Angelici, Laura; Iodice, Simona; Delbue, Serena; Mariani, Jacopo; Apostoli, Pietro; Pesatori, Angela Cecilia; Bollati, Valentina

2017-11-01

Inhaled particles have been shown to produce systemic changes in DNA methylation. Global hypomethylation has been associated to viral sequence reactivation, possibly linked to the activation of pro-inflammatory pathways occurring after exposure. This observation provides a rationale to investigate viral sequence (both exogenous and endogenous) methylation in association to metal-rich particulate matter exposure. To verify this hypothesis, we chose the Wp promoter of the Epstein-Barr Virus (EBV-Wp) and the promoter of the human-endogenous-retrovirus w (HERV-w), respectively as a paradigm of an exogenous and an endogenous retroviral sequence, to be investigated by bisulfite PCR Pyrosequencing. We enrolled 63 male workers in an electric furnace steel plant, exposed to high level of metal-rich particulate matter. Comparing samples obtained in the first day of a work week (time 0-baseline, after 2 days off work) and the samples obtained after 3 days of work (time 1-post exposure), the mean methylation of EBV-Wp was significantly higher at baseline compared to post-exposure (mean baseline = 56.7%5mC; mean post-exposure = 47.9%5mC; p-value = 0.009), whereas the mean methylation of HERV-w did not significantly differ. Individual exposure to inhalable particles and metals was estimated based on measures in all working areas and time spent by the study subjects in each area. In a regression model adjusted for age, body mass index and smoking, PM and metal components had a positive association with EBV-Wp methylation (i.e. PM10: β = 5.99, p-value < 0.038; nickel: β = 17.82, p-value = 0.02; arsenic: β = 13.59, p-value < 0.015). The difference observed comparing baseline and post-exposure samples may be suggestive of a rapid change in EBV methylation induced by air particles, while correlation between EBV methylation and PM/metal exposure may represent a more stable adaptive mechanism. Future studies investigating a larger panel of viral sequences could better elucidate

Air Pollution and Climate Change Health Impact Assessment. The ACHIA Project

International Nuclear Information System (INIS)

Kinney, P.L.

2013-01-01

Climate change may affect human health via interactions with air pollutants such as ozone and PM 2.5 . These air pollutants are linked to climate because they can be both affected by and have effects on climate. In coming decades, substantial, cost-effective improvements in public health may be achieved with well-planned strategies to mitigate climate impacts while also reducing health effects of ozone and PM 2.5 . Climate mitigation actions affect greenhouse pollutant emissions, including methane and black carbon, but also may affect other key air pollution precursors such as NOx, CO, and SOx. To better understand the potential of such strategies, studies are needed that assess possible future health impacts under alternative assumptions about future emissions and climate across multiple spatial scales. The overall objective of this project is to apply state of the art climate, air quality, and health modelling tools to assess future health impacts of ozone and PM 2.5 under different IPCCs scenario of climate change, focusing specifically on pollution-related health co-benefits which could be achieved under alternative climate mitigation pathways in the period 2030-2050. This question will be explored at three spatial scales: global, regional (Europe), and urban (Paris). ACHIA is comprised of an integrated set of four work packages: WP1. Global Climate and Air Pollution Impacts of Alternative Emissions Pathways; WP2. Climate and Air Quality at Regional and Urban Scales: Results for Europe and Paris; WP3. Health Impact Assessment; WP4. Dissemination, Evaluation, Management. ACHIA is designed to create an interdisciplinary approach to the impacts of climate change on health through air quality changes, and to start longer-term collaborations between communities. We expect the project to advance state of art across all WPs, with important implications for research groups around the world. A particular innovation of the project is the multi-scale aspect, i.e., the

Viewls - Environmental and economic performance of biofuels. Vol. 1 - Main report

Energy Technology Data Exchange (ETDEWEB)

Varela, M.; Lago, C. [CIEMAT (Spain); Jungmeier, G.; Koenighofer, K. [Joanneum Research (Austria)

2005-04-15

According to the European Directive 2003/30 'Promotion of the use of biofuels or other renewable fuels for transport' the use of biofuels in the transportation sector should be strongly increased in the next decades in Europe. The purpose of this study was to obtain and present clear data and information to outline environmental and economic performance of different biofuels. Based on a standardised review of the most relevant international studies on transportation systems using biomass, the study presented estimation of ranges for the environmental and economic performance of different biofuels given by the two 'threshold values' and the 'reference value' between these threshold values. These results might be used by different stakeholders as an information source for future activities regarding the use of biofuels in the transportation sector in Europe. (BA)

Viewls - Environmental and economic performance of biofuels. Vol. 1 - Main report

International Nuclear Information System (INIS)

Varela, M.; Lago, C.; Jungmeier, G.; Koenighofer, K.

2005-04-01

According to the European Directive 2003/30 'Promotion of the use of biofuels or other renewable fuels for transport' the use of biofuels in the transportation sector should be strongly increased in the next decades in Europe. The purpose of this study was to obtain and present clear data and information to outline environmental and economic performance of different biofuels. Based on a standardised review of the most relevant international studies on transportation systems using biomass, the study presented estimation of ranges for the environmental and economic performance of different biofuels given by the two 'threshold values' and the 'reference value' between these threshold values. These results might be used by different stakeholders as an information source for future activities regarding the use of biofuels in the transportation sector in Europe. (BA)

SU(5)c color model constraints from UA2

International Nuclear Information System (INIS)

Foot, R.; Hernandez, O.F.; Rizzo, T.G.; Ames Lab., IA; Iowa State Univ. of Science and Technology, Ames

1991-01-01

We investigate the possibility that the color gauge group SU(3) may arise as a consequence of the spontaneous symmetry breaking of SU(5) c . In an earlier paper we examine the constraints imposed on the SU(5) c color model by recent measurements of the dijet mass distribution at CDF. We found that the CDF data did not exclude any region of parameter space in the model. Here we consider similar data from UA2 and find that it leads to the constraint Msub(Z') > or approx. 280 GeV. (orig.)

Theoretical aspects of stress corrosion cracking of Alloy 22

Science.gov (United States)

Lee, Sang-Kwon; Macdonald, Digby D.

2018-05-01

Theoretical aspects of the stress corrosion cracking of Alloy 22 in contact with saturated NaCl solution are explored in terms of the Coupled Environment Fracture Model (CEFM), which was calibrated upon available experimental crack growth rate data. Crack growth rate (CGR) was then predicted as a function of stress intensity, electrochemical potential, solution conductivity, temperature, and electrochemical crack length (ECL). From the dependence of the CGR on the ECL and the evolution of a semi-elliptical surface crack in a planar surface under constant loading conditions it is predicted that penetration through the 2.5-cm thick Alloy 22 corrosion resistant layer of the waste package (WP) could occur 32,000 years after nucleation. Accordingly, the crack must nucleate within the first 968,000 years of storage. However, we predict that the Alloy 22 corrosion resistant layer will not be penetrated by SCC within the 10,000-year Intermediate Performance Period, even if a crack nucleates immediately upon placement of the WP in the repository.

EQ6 Calculations for Chemical Degradation Of N Reactor (U-Metal) Spent Nuclear Fuel Waste Packages

International Nuclear Information System (INIS)

P. Bernot

2001-01-01

time periods up to 6.35 x 10 5 years. This longer time frame is closer to the one million year time horizon recently recommended by the National Academy of Sciences to the Environmental Protection Agency for performance assessment related to a nuclear repository (Ref. 5). However, it is important to note that after 100,000 years, most of the materials of interest (fissile materials) will have either been removed from the WP, reached a steady state, or been transmuted

EQ6 Calculations for Chemical Degradation Of N Reactor (U-Metal) Spent Nuclear Fuel Waste Packages

Energy Technology Data Exchange (ETDEWEB)

P. Bernot

2001-02-27

to time periods up to 6.35 x 10{sup 5} years. This longer time frame is closer to the one million year time horizon recently recommended by the National Academy of Sciences to the Environmental Protection Agency for performance assessment related to a nuclear repository (Ref. 5). However, it is important to note that after 100,000 years, most of the materials of interest (fissile materials) will have either been removed from the WP, reached a steady state, or been transmuted.

Free fermion resolution of supergroup WZNW models

Energy Technology Data Exchange (ETDEWEB)

Quella, T.; Schomerus, V.

2007-06-15

Extending our earlier work on PSL(2 vertical stroke 2), we explain how to reduce the solution of WZNW models on general type I supergroups to those defined on the bosonic subgroup. The new analysis covers in particular the supergroups GL(M vertical stroke N) along with several close relatives such as PSL(N vertical stroke N), certain Poincar'e supergroups and the series OSP(2 vertical stroke 2N). This remarkable progress relies on the use of a special Feigin-Fuchs type representation. In preparation for the field theory analysis, we shall exploit a minisuperspace analogue of a free fermion construction to deduce the spectrum of the Laplacian on type I supergroups. The latter is shown to be non-diagonalizable. After lifting these results to the full WZNW model, we address various issues of the field theory, including its modular invariance and the computation of correlation functions. In agreement with previous findings, supergroup WZNW models allow to study chiral and non-chiral aspects of logarithmic conformal field theory within a geometric framework. We shall briefly indicate how insights from WZNW models carry over to non-geometric examples, such as e.g. the W(p) triplet models.

Free fermion resolution of supergroup WZNW models

Energy Technology Data Exchange (ETDEWEB)

Quella, T; Schomerus, V

2007-06-15

Extending our earlier work on PSL(2 vertical stroke 2), we explain how to reduce the solution of WZNW models on general type I supergroups to those defined on the bosonic subgroup. The new analysis covers in particular the supergroups GL(M vertical stroke N) along with several close relatives such as PSL(N vertical stroke N), certain Poincar'e supergroups and the series OSP(2 vertical stroke 2N). This remarkable progress relies on the use of a special Feigin-Fuchs type representation. In preparation for the field theory analysis, we shall exploit a minisuperspace analogue of a free fermion construction to deduce the spectrum of the Laplacian on type I supergroups. The latter is shown to be non-diagonalizable. After lifting these results to the full WZNW model, we address various issues of the field theory, including its modular invariance and the computation of correlation functions. In agreement with previous findings, supergroup WZNW models allow to study chiral and non-chiral aspects of logarithmic conformal field theory within a geometric framework. We shall briefly indicate how insights from WZNW models carry over to non-geometric examples, such as e.g. the W(p) triplet models.

Porównanie wpływu stosowania kompleksu lipidowego PCSO-524™ z Perna canaliculus oraz oleju z ryb na intensywność bólu odczuwanego przez pacjentów z chorobą zwyrodnieniową stawów kolanowych i/lub biodrowych

OpenAIRE

Marek Zawadzki; Jacek Szechiński

2011-01-01

Cel: Porównanie wpływu zażywania opatentowanego, stabilizowanego CO2 oleju z nowozelandzkich małży zielonych Perna canaliculus(PCSO-524™) oraz oleju z ryb [zawierającego standaryzowanąmieszaninę kwasu eikozapentaenowego (eicosapentaenoicacid – EPA) – 18%, i kwasu dokozaheksaenowego (docosahexaenoicacid – DHA) – 12%] na łagodzenie bólu, zmiany w wyznacznikachjakości życia i bezpieczeństwo u pacjentów z chorobą zwyrodnieniowąstawów kolanowych i/lub biodrowych.Materiały i metody: U 50 pacjentów ...

RAC1 GTP-ase signals Wnt-beta-catenin pathway mediated integrin-directed metastasis-associated tumor cell phenotypes in triple negative breast cancers.

Science.gov (United States)

De, Pradip; Carlson, Jennifer H; Jepperson, Tyler; Willis, Scooter; Leyland-Jones, Brian; Dey, Nandini

2017-01-10

The acquisition of integrin-directed metastasis-associated (ID-MA) phenotypes by Triple-Negative Breast Cancer (TNBC) cells is caused by an upregulation of the Wnt-beta-catenin pathway (WP). We reported that WP is one of the salient genetic features of TNBC. RAC-GTPases, small G-proteins which transduce signals from cell surface proteins including integrins, have been implicated in tumorigenesis and metastasis by their role in essential cellular functions like motility. The collective percentage of alteration(s) in RAC1 in ER+ve BC was lower as compared to ER-ve BC (35% vs 57%) (brca/tcga/pub2015). High expression of RAC1 was associated with poor outcome for RFS with HR=1.48 [CI: 1.15-1.9] p=0.0019 in the Hungarian ER-veBC cohort. Here we examined how WP signals are transduced via RAC1 in the context of ID-MA phenotypes in TNBC. Using pharmacological agents (sulindac sulfide), genetic tools (beta-catenin siRNA), WP modulators (Wnt-C59, XAV939), RAC1 inhibitors (NSC23766, W56) and WP stimulations (LWnt3ACM, Wnt3A recombinant) in a panel of 6-7 TNBC cell lines, we studied fibronectin-directed (1) migration, (2) matrigel invasion, (3) RAC1 and Cdc42 activation, (4) actin dynamics (confocal microscopy) and (5) podia-parameters. An attenuation of WP, which (a) decreased cellular levels of beta-catenin, as well as its nuclear active-form, (b) decreased fibronectin-induced migration, (c) decreased invasion, (d) altered actin dynamics and (e) decreased podia-parameters was successful in blocking fibronectin-mediated RAC1/Cdc42 activity. Both Wnt-antagonists and RAC1 inhibitors blocked fibronectin-induced RAC1 activation and inhibited the fibronectin-induced ID-MA phenotypes following specific WP stimulation by LWnt3ACM as well as Wnt3A recombinant protein. To test a direct involvement of RAC1-activation in WP-mediated ID-MA phenotypes, we stimulated brain-metastasis specific MDA-MB231BR cells with LWnt3ACM. LWnt3ACM-stimulated fibronectin-directed migration was blocked by

Determination and thermodynamic modeling of solid–liquid phase equilibrium for 3,5-dichloroaniline in pure solvents and ternary 3,5-dichloroaniline + 1,3,5-trichlorobenzene + toluene system

International Nuclear Information System (INIS)

Li, Rongrong; Du, Cunbin; Meng, Long; Han, Shuo; Wang, Jian; Zhao, Hongkun

2016-01-01

Highlights: • Solubility of 3,5-dichloroaniline in seven organic solvents were determined. • Solid–liquid phase equilibrium for ternary system was measured. • The binary and ternary phase diagrams were constructed. • The phase diagrams were correlated with thermodynamic models. - Abstract: The solid–liquid phase equilibrium data for 3,5-dichloroaniline in n-propanol, isopropanol, n-butanol, isobutanol, toluene, ethyl acetate and acetone at (283.15 to 308.15) K were determined experimentally by gas chromatography under 101.3 kPa. The solubility of 3,5-dichloroaniline in these solvents decreased according to the following order: ethyl acetate > (acetone, toluene) for the solvents of ethyl acetate, acetone, and toluene; and for the other solvents, (isopropanol, n-butanol) > n-propanol > isobutanol. According to the solubility of 3,5-dichloroaniline in pure solvents, the solid–liquid phase equilibrium for the ternary mixture of 3,5-dichloroaniline + 1,3,5-trichlorobenzene + toluene were measured by using an isothermal saturation method at three temperatures of 283.15, 293.15, and 303.15 K under 101.3 kPa, and the corresponding isothermal phase diagrams were constructed. Two pure solids were formed in the ternary system at a fixed temperature, which were pure 3,5-dichloroaniline and pure 1,3,5-trichlorobenzene and were identified by Schreinemakers’ method of wet residue. The temperature dependence of 3,5-dichloroaniline solubility in pure solvents was correlated by the modified Apelblat equation, λh equation, Wilson model and NRTL model; and the ternary solid–liquid phase equilibrium of 3,5-dichloroaniline + 1,3,5-trichlorobenzene + toluene were described by the Wilson model and NRTL model. Results showed that calculated solubility values with these models agreed well with the experimental ones for the studied binary and ternary systems. The solid–liquid equilibrium and the thermodynamic models for the binary and ternary systems can offer the

Wpływ regularnej aktywności fizycznej na skład ciała i ciśnienie tętnicze dzieci ze szkoły sportowej

Directory of Open Access Journals (Sweden)

Małgorzata Stańczyk

2013-06-01

Full Text Available Wstęp: Trening fizyczny uważany jest za czynnik wpływający na parametry antropometryczne i ciśnienie tęt‑ nicze. Twierdzi się, że osoby regularnie ćwiczące mają lepsze wskaźniki składu ciała oraz niższe wartości ciśnienia tętniczego krwi w porównaniu z osobami nieuprawiającymi sportu. Cel: Ocena wpływu regularnej rocznej aktywności fizycznej prowadzonej w szkole sportowej na skład ciała oraz wartości ciśnienia tętnicze‑ go u dzieci 14-letnich (II klasa gimnazjum. Materiał i metodyka: W badaniu wzięło udział 25 dzieci z gim‑ nazjum sportowego. Dzieci badano dwukrotnie w odstępie 12 miesięcy. Analizie poddano zmianę parame‑ trów antropometrycznych, składu ciała metodą impedancji bioelektrycznej oraz wartości ciśnienia krwi. Wyniki: W całej grupie zaobserwowano wzrost wartości centylowych ciśnienia skurczowego krwi (p < 0,05, przede wszystkim u chłopców. W zakresie ciśnienia rozkurczowego nie zanotowano istotnych różnic. Skład ciała zmienił się niekorzystnie u wszystkich badanych – wzrósł udział tłuszczu (13% vs 20%, p < 0,05, a przy‑ rost masy tłuszczowej był wyższy u dziewczynek (6% vs 3%, p < 0,05. Centyl BMI istotnie statystycznie wzrósł w grupie dziewczynek (37 vs 49, p < 0,05, u chłopców nie uległ zmianie. Wnioski: Aktywność fizyczna proponowana przez szkołę sportową nie poprawia stanu odżywienia 13–14-letnich dziewcząt i chłopców, u których obserwuje się istotne zwiększenie w organizmie zawartości tkanki tłuszczowej. Szkolna aktywność fizyczna nie powoduje obniżenia ciśnienia tętniczego wśród młodzieży w wieku 13–14 lat w odniesieniu do norm wiekowych. W zakresie ciśnienia skurczowego w grupie chłopców zaobserwowano nawet wyższe wartości centylowe.

Modelos de ajuste e métodos para a determinação da curva de retenção de água de um Latossolo-vermelho-amarelo Adjustment models and methods for determining the soil water retention curve of a red-yellow Latosol

Directory of Open Access Journals (Sweden)

Wanderley Andrade Costa

2008-04-01

Full Text Available A caracterização da capacidade de retenção de água de um solo é fundamental para a descrição do fluxo de água através dele e para o adequado manejo da irrigação. São apresentadas comparações entre curvas de retenção de água do solo: ajustadas pelos modelos propostos por van Genuchten e por Hutson & Cass; obtidas pelo método do WP4 usando processo de umedecimento e de secagem; obtidas pelo método da centrífuga utilizando amostras deformadas e indeformadas; e obtidas pelo WP4 e centrífuga, usando um processo de secagem e amostra deformada. Amostras deformadas e indeformadas foram coletadas com trados específicos em um Latossolo Vermelho-Amarelo (LVA, textura argilosa. Foram determinadas as propriedades hídricas do solo necessárias à elaboração das curvas de retenção de água obtidas por análise de regressão. O modelo de van Genuchten possibilitou o melhor ajuste nas diversas situações estudadas. Considerando o processo de secagem, o teor de água útil obtido superou em 13 % o resultado do processo de umedecimento e evidenciou reduzido efeito de histerese. A amostra deformada apresentou-se com um teor de água útil superior 61,7 % ao valor obtido para a amostra indeformada. Entre os métodos estudados, verificou-se que aquele que usa o WP4 subestimou os dados obtidos pela centrífuga. Verificou-se que há diferenças entre amostra deformada e indeformada e os métodos utilizados na obtenção da curva de retenção.The characterization of the soil water retention capacity is fundamental for an adequate irrigation management and water flow description. We present comparisons of soil water retention curves adjusted in distinct ways: by the models proposed by van Genuchten and by Hutson & Cass; by the WP4 method in a wetting and drying process; by the centrifuge method using disturbed as well as undisturbed soil samples; and by the WP4 and centrifuge using a drying process and disturbed soil samples. Disturbed and

Finance and economic and social reproduction: prospects for financialised futures in Portugal

OpenAIRE

Rodrigues, João; Santos, Ana C.; Teles, Nuno

2016-01-01

Portugal is a semi-peripheral country within the EU that has partially followed similar processes as those of most financialised core countries, and that has been particularly hard-hit by the GFC. This paper reflects on the factors that have shaped economic and social reproduction in Portugal, drawing on previous research examining the involvement of households with finance and the systems of provision for housing, pensions and water conducted for WP5 and WP8 of FESSUD. Based on the Portugues...

SMILE: experimental results of the WP4 PTS large scale test performed on a component in terms of cracked cylinder involving warm pre-stress

International Nuclear Information System (INIS)

Kerkhof, K.; Bezdikian, G.; Moinereau, D.; Dahl, A; Wadier, Y.; Gilles, P.; Keim, E.; Chapuliot, S.; Taylor, N.; Lidbury, D.; Sharples, J.; Budden, P.; Siegele, D.; Nagel, G.; Bass, R.; Emond, D.

2005-01-01

The Reactor Pressure Vessel (RPV) is an essential component, which is liable to limit the lifetime duration of PWR plants. The assessment of defects in RPV subjected to pressurized thermal shock (PTS) transients made at an European level generally does not necessarily consider the beneficial effect of the load history (Warm Pre-stress, WPS). The SMILE project - Structural Margin Improvements in aged embrittled RPV with Load history Effects-aims to give sufficient elements to demonstrate, to model and to validate the beneficial WPS effect. It also aims to harmonize the different approaches in the national codes and standards regarding the inclusion of the WPS effect in a RPV structural integrity assessment. The project includes significant experimental work on WPS type experiments with C(T) specimens and a PTS type transient experiment on a large component. This paper deals with the results of the PTS type transient experiment on a component-like specimen subjected to WPS- loading, the so called Validation Test, carried out within the framework of work package WP4. The test specimen consists of a cylindrical thick walled specimen with a thickness of 40 mm and an outer diameter of 160 mm, provided with an internal fully circumferential crack with a depth of about 15 mm. The specified load path type is Load-Cool-Unload-Fracture (LCUF). No crack initiation occurred during cooling (thermal shock loading) although the loading path crossed the fracture toughness curve in the transition region. The benefit of the WPS-effect by final re-loading up to fracture in the lower shelf region, was shown clearly. The corresponding fracture load during reloading in the lower shelf region was significantly higher than the crack initiation values of the original material in the lower shelf region. The post test fractographic evaluation showed that the fracture mode was predominantly cleavage fracture also with some secondary cracks emanating from major crack. (authors)

Catalytic modification of cellulose and hemicellulose - Sugarefine

Energy Technology Data Exchange (ETDEWEB)

Repo, T. [Helsinki Univ. (Finland),Laboratory of Inorganic Chemistry], email: timo.repo@helsinki.fi

2012-07-01

The main goal of the project is to develop catalytic methods for the modification of lignocellulose-based saccharides in the biorefineries. The products of these reactions could be used for example as biofuel components, raw materials for the chemical industry, solvents and precursors for biopolymers. The catalyst development aims at creating efficient, selective and green catalytic methods for profitable use in biorefineries. The project is divided in three work packages: In WP1 (Catalytic dehydration of cellulose) the aim is at developing non-toxic, efficient methods for the catalytic dehydration of cellulose the target molecule being here 5-hydroxymethylfurfural (5-HMF). 5-HMF is an interesting platform chemical for the production of fuel additives, solvents and polymers. In WP2 (Catalytic reduction), the objective of the catalytic reduction studies is to produce commercially interesting monofunctional chemicals, such as 1-butanol or 2-methyltetrahydrofuran (2-MeTHF). In WP3 (Catalytic oxidation), the research focuses on developing a green and efficient oxidation method for producing acids. Whereas acetic and formic acids are bulk chemicals, diacids such as glucaric and xylaric acids are valuable specialty chemicals for detergent, polymer and food production.

Wpływ wysiłku fizycznego wybranych dyscyplin sportowych na habitualną postawę ciała = The effect of physical exercise on selected sports on habitual posture

Directory of Open Access Journals (Sweden)

M. Mrozkowiak

2016-10-01

  Słowa kluczowe: postawa habitualna, sport   Streszczenie Wstęp. Wpływ ćwiczeń fizycznych na rozwój osobniczy są funkcją jego intensywności i     długotrwałości. Celem podjętych badań jest wykazanie wpływu treningu sportowego właściwego danej dyscyplinie sportowej na habitualną postawę ciała sportowca Materiał, przedmiot metoda. Pomiarów 35 przestrzennych cech habitualnej postawy ciała dokonano wśród 151 zawodników judo, zapasów, piłki siatkowej, piłki nożnej i szermierki. metodą fotogrametryczną. Wyniki. Opisano postawę habitualną sportowca właściwą każdej dyscyplinie sportowej, określono istotność różnic z przyjętymi wielkościami cech postawy habitualnej osobników nie uprawiających sportu klasyfikowanego. Wnioski. (1 Stan zdrowia uprawiających sport kwalifikowany może zależeć od wiedzy, umiejętności i wrażliwości prowadzącego szkolenie sportowe. Istotnym kryterium oceny stosowanych obciążeń w sportach asymetrycznych może być diagnostyka postawy ciała, umożliwiająca korektę metod treningowych i stosowanych środków w jej ramach. Wskazane jest wprowadzenie wszechstronnego szkolenia zawodników i doskonalenia funkcjonalnej równowagi poszczególnych grup mięśniowych, szczególnie w dyscyplinach asymetrycznych, (2 Należy wprowadzić właściwą selekcje w naborze młodych adeptów klubów sportowych w oparciu o systematyczne badania lekarskie, (3 Zaburzenia statyki postawy ciała w wieku dojrzałego zawodnika mogą być  konsekwencją nie stosowania zasad treningu holistycznego i błędów w początkowym etapie szkolenia, błędów w rozgrzewce i braku ćwiczeń kształtujących nawyk postawy prawidłowej w jej ramach, (4 Zrealizowane badania nie dają pełnego obrazu zmian w postawie ciała po wpływem pracy charakterystycznej dla danej dyscypliny sportowej.     Keywords: habitual posture, sport   Summary   Admission. The impact of physical exercise on the development of the individual

Antiviral activity of a small molecule deubiquitinase inhibitor occurs via induction of the unfolded protein response.

Directory of Open Access Journals (Sweden)

Jeffrey W Perry

Full Text Available Ubiquitin (Ub is a vital regulatory component in various cellular processes, including cellular responses to viral infection. As obligate intracellular pathogens, viruses have the capacity to manipulate the ubiquitin (Ub cycle to their advantage by encoding Ub-modifying proteins including deubiquitinases (DUBs. However, how cellular DUBs modulate specific viral infections, such as norovirus, is poorly understood. To examine the role of DUBs during norovirus infection, we used WP1130, a small molecule inhibitor of a subset of cellular DUBs. Replication of murine norovirus in murine macrophages and the human norovirus Norwalk virus in a replicon system were significantly inhibited by WP1130. Chemical proteomics identified the cellular DUB USP14 as a target of WP1130 in murine macrophages, and pharmacologic inhibition or siRNA-mediated knockdown of USP14 inhibited murine norovirus infection. USP14 is a proteasome-associated DUB that also binds to inositol-requiring enzyme 1 (IRE1, a critical mediator of the unfolded protein response (UPR. WP1130 treatment of murine macrophages did not alter proteasome activity but activated the X-box binding protein-1 (XBP-1 through an IRE1-dependent mechanism. In addition, WP1130 treatment or induction of the UPR also reduced infection of other RNA viruses including encephalomyocarditis virus, Sindbis virus, and La Crosse virus but not vesicular stomatitis virus. Pharmacologic inhibition of the IRE1 endonuclease activity partially rescued the antiviral effect of WP1130. Taken together, our studies support a model whereby induction of the UPR through cellular DUB inhibition blocks specific viral infections, and suggest that cellular DUBs and the UPR represent novel targets for future development of broad spectrum antiviral therapies.

The FORGE (Fate Of Repository Gases) pan European project

International Nuclear Information System (INIS)

Shaw, Richard

2010-01-01

-scaling allowing the optimisation of concepts through detailed scenario analysis. The FORGE partners are committed to training and CPD through a broad portfolio of training opportunities and initiatives which form a significant part of the project. The FORGE project is divided into five work packages. - WP 1 Treatment of gas in performance assessment; - WP 2 Gas generation; - WP 3 Engineered barrier systems; - WP 4 Disturbed host rock formations; - WP 5 Undisturbed host rock formations. There are modelling activities in all of these work packages and a Modelling Co-ordinator specifically to overview all aspects of this work thus ensuring appropriate focus, facilitating the cross-flow of ideas and concepts between WP's is an integral part of the project. This will also ensure best practice is shared between all participants and teams. Further details on the FORGE project and its outcomes can be accessed at www.FORGEproject.org. (author)

SCDAP/RELAP5 lower core plate model

International Nuclear Information System (INIS)

Coryell, E.W.; Griffin, F.P.

1999-01-01

The SCDAP/RELAP5 computer code is a best-estimate analysis tool for performing nuclear reactor severe accident simulations. This report describes the justification, theory, implementation, and testing of a new modeling capability which will refine the analysis of the movement of molten material from the core region to the vessel lower head. As molten material moves from the core region through the core support structures it may encounter conditions which will cause it to freeze in the region of the lower core plate, delaying its arrival to the vessel head. The timing of this arrival is significant to reactor safety, because during the time span for material relocation to the lower head, the core may be experiencing steam-limited oxidation. The time at which hot material arrives in a coolant-filled lower vessel head, thereby significantly increasing the steam flow rate through the core region, becomes significant to the progression and timing of a severe accident. This report is a revision of a report INEEL/EXT-00707, entitled ''Preliminary Design Report for SCDAP/RELAP5 Lower Core Plate Model''

WP3 Prototype development for operational planning tool

DEFF Research Database (Denmark)

Kristoffersen, Trine; Meibom, Peter; Apfelbeck, J.

is documented in chapter 1 and 2. The inclusion of load uncertainty and forced outages in the Scenario Tree Tool enables calculation of the demand for reserve power depending on the forecast horizon. The algorithm is given in Section 3.1. The design of a modified version of the Joint Market Model enabling...... estimation of the optimal amount of reserve power to reserve day-ahead before the actual operation hour is documented in Section 3.2. With regard to the evaluation of a power system, its ability to cope with extreme events is crucial to be investigated. Chapter 4 gives a definition of such extreme events....... Further, the methodology to identify extreme events on the basis of the existing tools is described. Within the SUPWIND consortium there has been an interest in using the Joint Market Model to model smaller parts of a power system but with more detailed representation of the transmission and distribution...

Effects of Whey Protein Supplementation Pre- or Post-Resistance Training on Muscle Mass, Muscular Strength, and Functional Capacity in Pre-Conditioned Older Women: A Randomized Clinical Trial

Directory of Open Access Journals (Sweden)

Hellen C. G. Nabuco

2018-05-01

Full Text Available Aging is associated with sarcopenia and dynapenia, with both processes contributing to functional dependence and mortality in older adults. Resistance training (RT and increased protein intake are strategies that may contribute to health improvements in older adults. Therefore, the aim was to investigate the effects of whey protein (WP supplementation consumed either immediately pre- or post-RT on skeletal muscle mass (SMM, muscular strength, and functional capacity in pre-conditioned older women. Seventy older women participated in this investigation and were randomly assigned to one of three groups: whey protein pre-RT and placebo post-RT (WP-PLA, n = 24, placebo pre-RT and whey protein post-RT (PLA-WP, n = 23, and placebo pre- and post-RT (PLA-PLA, n = 23. Each group ingested 35 g of WP or PLA. The RT program was carried out over 12 weeks (three times per week; 3 × 8–12 repetition maximum. Body composition, muscular strength, functional capacity, and dietary intake were assessed pre- and post-intervention. Two-way analysis of covariance (ANCOVA for repeated measures, with baseline scores as covariates were used for data analysis. A time vs. group interaction (p < 0.05 was observed with WP-PLA and PLA-WP presenting greater increases compared with PLA-PLA for SMM (WP-PLA = 3.4%; PLA-WP = 4.2%; PLA-PLA = 2.0%, strength (WP-PLA = 8.1%; PLA-WP = 8.3%; PLA-PLA = 7.0%, and the 10-m walk test (WP-PLA = −10.8%; PLA-WP = −11.8%; PLA-PLA = −4.3%. Whey protein supplementation was effective in promoting increases in SMM, muscular strength, and functional capacity in pre-conditioned older women, regardless of supplementation timing. This trial was registered at ClinicalTrials.gov: NCT03247192.

Validation of modelling the radiation exposure due to solar particle events at aircraft altitudes

International Nuclear Information System (INIS)

Beck, P.; Bartlett, D. T.; Bilski, P.; Dyer, C.; Flueckiger, E.; Fuller, N.; Lantos, P.; Reitz, G.; Ruehm, W.; Spurny, F.; Taylor, G.; Trompier, F.; Wissmann, F.

2008-01-01

Dose assessment procedures for cosmic radiation exposure of aircraft crew have been introduced in most European countries in accordance with the corresponding European directive and national regulations. However, the radiation exposure due to solar particle events is still a matter of scientific research. Here we describe the European research project CONRAD, WP6, Subgroup-B, about the current status of available solar storm measurements and existing models for dose estimation at flight altitudes during solar particle events leading to ground level enhancement (GLE). Three models for the numerical dose estimation during GLEs are discussed. Some of the models agree with limited experimental data reasonably well. Analysis of GLEs during geomagnetically disturbed conditions is still complex and time consuming. Currently available solar particle event models can disagree with each other by an order of magnitude. Further research and verification by on-board measurements is still needed. (authors)

Evaluation of Various Methods for Estimating Global Solar Radiation in the Southeastern United States

Energy Technology Data Exchange (ETDEWEB)

Woli, Prem; Paz, Joel O.

2012-05-01

Global solar radiation Rg is an important input for crop models to simulate crop responses. Because the scarcity of long and continuous records of Rg is a serious limitation in many countries, Rg is estimated using models. For crop-model application, empirical Rg models that use commonly measured meteorological variables, such as temperature and precipitation, are generally preferred. Although a large number of models of this kind exist, few have been evaluated for conditions in the United States. This study evaluated the performances of 16 empirical, temperature- and/or precipitation-based Rg models for the southeastern United States. By taking into account spatial distribution and data availability, 30 locations in the region were selected and their daily weather data spanning eight years obtained. One-half of the data was used for calibrating the models, and the other half was used for evaluation. For each model, location-specific parameter values were estimated through regressions. Models were evaluated for each location using the root-mean-square error and the modeling efficiency as goodness-of-fit measures. Among the models that use temperature or precipitation as the input variable, the Mavromatis model showed the best performance. The piecewise linear regression based Wu et al. model (WP) performed best not only among the models that use both temperature and precipitation but also among the 16 models evaluated, mainly because it has separate relationships for low and high radiation levels. The modeling efficiency of WP was from ~5% to more than 100% greater than those of the other models, depending on models and locations.

Distributed Photovoltaics in the Swedish Energy System. Model Development and Simulations

International Nuclear Information System (INIS)

Widen, Joakim

2009-06-01

that the appearance of daily load profiles, and thus the degree of matching to PV generation, are highly variable. Studies of matching of PV generation to aggregate domestic demand showed that load matching at moderate overproduction levels can be improved by PV panel orientation, demand side management (DSM) and storage. At high overproduction levels, however, the only impacting option is storage. Probabilistic power-flow simulations with the developed models yield a versatile picture of how impacts are distributed among customers and over time, as compared to often-used static simulations. Contrary to the trend towards higher time resolution in international research, hourly resolution was found to be sufficient for determining probability distributions for LV grid voltages. Power-flow simulations of three Swedish LV grids showed that a penetration level of 1 kWp PV systems at every customer was most beneficial in terms of on-site coverage of demand, counteracted voltage drops and decreased network losses. However, much higher penetration levels, up to the highest studied level of 5 kWp per household, can be handled without voltage rise above prescribed limits

Distributed Photovoltaics in the Swedish Energy System. Model Development and Simulations

Energy Technology Data Exchange (ETDEWEB)

Widen, Joakim

2009-06-15

showed that the appearance of daily load profiles, and thus the degree of matching to PV generation, are highly variable. Studies of matching of PV generation to aggregate domestic demand showed that load matching at moderate overproduction levels can be improved by PV panel orientation, demand side management (DSM) and storage. At high overproduction levels, however, the only impacting option is storage. Probabilistic power-flow simulations with the developed models yield a versatile picture of how impacts are distributed among customers and over time, as compared to often-used static simulations. Contrary to the trend towards higher time resolution in international research, hourly resolution was found to be sufficient for determining probability distributions for LV grid voltages. Power-flow simulations of three Swedish LV grids showed that a penetration level of 1 kWp PV systems at every customer was most beneficial in terms of on-site coverage of demand, counteracted voltage drops and decreased network losses. However, much higher penetration levels, up to the highest studied level of 5 kWp per household, can be handled without voltage rise above prescribed limits

EOSLT Consortium Biomass Co-firing. WP 4. Biomass co-firing in oxy-fuel combustion. Part 1. Lab- Scale Experiments

Energy Technology Data Exchange (ETDEWEB)

Fryda, L.E. [ECN Biomass, Coal and Environmental Research, Petten (Netherlands)

2011-07-15

In the frame of WP4 of the EOS LT Co-firing program, the ash formation and deposition of selected coal/biomass blends under oxyfuel and air conditions were studied experimentally in the ECN lab scale coal combustor (LCS). The fuels used were Russian coal, South African coal and Greek Lignite, either combusted separately or in blends with cocoa and olive residue. The first trial period included tests with the Russian and South African coals and their blends with cocoa, the second trial period included Lignite with olive residue tests and a final period firing only Lignite and Russian coal, mainly to check and verify the observed results. During the testing, also enriched air combustion was applied, in order to establish conclusions whether a systematic trend on ash formation and deposition exists, ranging from conventional air, to enriched air (improving post combustion applications) until oxyfuel conditions. A horizontal deposition probe equipped with thermocouples and heat transfer sensors for on line data acquisition, and a cascade impactor (staged filter) to obtain size distributed ash samples including the submicron range at the reactor exit were used. The deposition ratio and the deposition propensity measured for the various experimental conditions were higher in all oxyfuel cases. No significant variations in the ash formation mechanisms and the ash composition were established. Finally the data obtained from the tests performed under air and oxy-fuel conditions were utilised for chemical equilibrium calculations in order to facilitate the interpretation of the measured data; the results indicate that temperature dependence and fuels/blends ash composition are the major factors affecting gaseous compound and ash composition rather than the combustion environment, which seems to affect neither the ash and fine ash (submicron) formation, nor the ash composition. The ash deposition mechanisms were studied in more detail in Part II of this report.

Assessment and improvement of condensation models in RELAP5/MOD3.2

Energy Technology Data Exchange (ETDEWEB)

Choi, Ki Yong; Park, Hyun Sik; Kim, Sang Jae; No, Hee Chen [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

The condensation models in the standard RELAP5/MOD3.2 code are assessed and improved based on the database, which is constructed from the previous experimental data on various condensation phenomena. The default model of the laminar film condensation in RELAP5/MOD3.2 does not give any reliable predictions, and its alternative model always predicts higher values than the experimental data. Therefore, it is needed to develop a new correlation based on the experimental data of various operating ranges in the constructed database. The Shah correlation, which is used to calculate the turbulent film condensation heat transfer coefficients in the standard RELAP5/MOD3.2, well predicts the experimental data in the database. The horizontally stratified condensation model of RELAP5/MOD3.2 overpredicts both cocurrent and countercurrent experimental data. The correlation proposed by H.J.Kim predicts the database relatively well compared with that of RELAP6/MOD3.2. The RELAP5/MOD3.2 model should use the liquid velocity for the calculation of the liquid Reynolds number and be modified to consider the effects of the gas velocity and the film thickness. 2 refs., 5 figs., 1 tab. (Author)

Assessment and improvement of condensation models in RELAP5/MOD3.2

Energy Technology Data Exchange (ETDEWEB)

Choi, Ki Yong; Park, Hyun Sik; Kim, Sang Jae; No, Hee Chen [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1997-12-31

The condensation models in the standard RELAP5/MOD3.2 code are assessed and improved based on the database, which is constructed from the previous experimental data on various condensation phenomena. The default model of the laminar film condensation in RELAP5/MOD3.2 does not give any reliable predictions, and its alternative model always predicts higher values than the experimental data. Therefore, it is needed to develop a new correlation based on the experimental data of various operating ranges in the constructed database. The Shah correlation, which is used to calculate the turbulent film condensation heat transfer coefficients in the standard RELAP5/MOD3.2, well predicts the experimental data in the database. The horizontally stratified condensation model of RELAP5/MOD3.2 overpredicts both cocurrent and countercurrent experimental data. The correlation proposed by H.J.Kim predicts the database relatively well compared with that of RELAP6/MOD3.2. The RELAP5/MOD3.2 model should use the liquid velocity for the calculation of the liquid Reynolds number and be modified to consider the effects of the gas velocity and the film thickness. 2 refs., 5 figs., 1 tab. (Author)

Winter Pea: Promising New Crop for Washington's Dryland Wheat-Fallow Region

Directory of Open Access Journals (Sweden)

William F. Schillinger

2017-05-01

Full Text Available A 2-year tillage-based winter wheat (Triticum aestivum L.-summer fallow (WW-SF rotation has been practiced by the vast majority of farmers in the low-precipitation (<300 mm annual rainfed cropping region of east-central Washington and north-central Oregon for 140 years. Until recently, alternative crops (i.e., those other than WW so far tested have not been as economically viable or stable as WW-SF. A 6-year field study was conducted near Ritzville, WA (292 mm avg. annual precipitation to determine the yield and rotation benefits of winter pea (Pisum sativum L. (WP. Two 3-year rotations were evaluated: WP-spring wheat (SW-SF vs. WW-SW-SF. Winter pea yields averaged 2,443 vs. 4,878 kg/ha for WW. No fertilizer was applied to WP whereas 56 kg N and 11 kg S/ha were applied to WW. Winter pea used significantly less soil water than WW. Over the winter months, a lesser percentage of precipitation was stored in the soil following WP compared to WW because: (i very little WP residue remained on the soil surface after harvest compared to WW, and (ii the drier the soil, the more precipitation is stored in the soil over winter. However, soil water content in the spring was still greater following WP vs. WW. Soil residual N in the spring (7 months after the harvest of WP and WW was greater in WP plots despite not applying fertilizer to produce WP. Spring wheat grown after both WP and WW received the identical quantity of N, P, and S fertilizer each year. Average yield of SW was 2,298 and 2,011 kg/ha following WP and WW, respectively (P < 0.01. Adjusted gross economic returns for these two rotation systems were similar. Based partially on the results of this study, numerous farmers in the dry WW-SF region have shown keen interest in WP and acreage planted WP in east-central Washington has grown exponentially since 2013. This paper provides the first report of the potential for WP in the typical WW-SF region of the inland Pacific Northwest (PNW.

Time-scale and extent at which large-scale circulation modes determine the wind and solar potential in the Iberian Peninsula

International Nuclear Information System (INIS)

Jerez, Sonia; Trigo, Ricardo M

2013-01-01

The North Atlantic Oscillation (NAO), the East Atlantic (EA) and the Scandinavian (SCAND) modes are the three main large-scale circulation patterns driving the climate variability of the Iberian Peninsula. This study assesses their influence in terms of solar (photovoltaic) and wind power generation potential (SP and WP) and evaluates their skill as predictors. For that we use a hindcast regional climate simulation to retrieve the primary meteorological variables involved, surface solar radiation and wind speed. First we identify that the maximum influence of the various modes occurs on the interannual variations of the monthly mean SP and WP series, being generally more relevant in winter. Second we find that in this time-scale and season, SP (WP) varies up to 30% (40%) with respect to the mean climatology between years with opposite phases of the modes, although the strength and the spatial distribution of the signals differ from one month to another. Last, the skill of a multi-linear regression model (MLRM), built using the NAO, EA and SCAND indices, to reconstruct the original wintertime monthly series of SP and WP was investigated. The reconstructed series (when the MLRM is calibrated for each month individually) correlate with the original ones up to 0.8 at the interannual time-scale. Besides, when the modeled series for each individual month are merged to construct an October-to-March monthly series, and after removing the annual cycle in order to account for monthly anomalies, these correlate 0.65 (0.55) with the original SP (WP) series in average. These values remain fairly stable when the calibration and reconstruction periods differ, thus supporting up to a point the predictive potential of the method at the time-scale assessed here. (letter)

RELAP5 model for TRIGA 14 MWt

International Nuclear Information System (INIS)

Negut, Gheorghe; Prisecaru, Ilie)

2003-01-01

The ICN TRIGA facility was commissioned at the beginning of 1980. Since that time the 14 MW Material Test Reactor was used extensively for various tests, experiments and basic research. There were provided a 100 kW loop and natural convection capsules to test CANDU type fuel and structural materials as Zircaloy as well as medical and industrial radioisotopes production facilities. The first load of High Enriched Uranium (HEU) fuel, mostly was exhausted and in the '90 there was necessary a replacement with Low Enriched Uranium (LEU) fuel. The original configuration of 29 HEU fuel bundles is now replaced with a HEU - LEU mixed core of 35 fuel bundles. This process involved the revision of Safety Analysis Report.The paper presents the analysis of Loss of Fluid Accident (LOFA) and the comparison with the results obtained during commissioning phase. A simple model of the TRIGA core was developed with the aid of RELAP5MOD3.2 code. The RELAP5 documented the flow reversal and natural convection establishment, and the model proved a useful and accurate instrument for thermal hydraulic analysis. Presented are the RELAP5 model for the TRIGA reactor and a LOFA accident analysis. The following results and conclusions concerning the LOFA tests with emergency pump off after 15 minutes and at start of the test are presented. In the first test TRIGA reactor is operated at the nominal power of 14 MW and the main pumps flow rate is 700 kg/sec. The main pumps are stopped and in 10 seconds the flow rate reaches 22 kg/sec, the emergency pump flow rate. The emergency pump is stopped after 15 minutes from the LOFA test initiation. The reactor is tripped by the low flow rate signal at the level of 473 kg/sec. The core flow is reversed after the 5 seconds and the core is cooled by natural convection. After 425 seconds from the LOFA initiation the residual power level is sufficiently low, so, the flow is reversed once again and the residual heat is removed by the emergency pump flow in

Projections of Rainfall and Temperature from CMIP5 Models over BIMSTEC Countries

Science.gov (United States)

Pattnayak, K. C.; Kar, S. C.; Ragi, A. R.

2014-12-01

Rainfall and surface temperature are the most important climatic variables in the context of climate change. Thus, these variables simulated from fifth phase of the Climate Model Inter-comparison Project (CMIP5) models have been compared against Climatic Research Unit (CRU) observed data and projected for the twenty first century under the Representative Concentration Pathways (RCPs) 4.5 and 8.5 emission scenarios. Results for the seven countries under Bay of Bengal Initiative for Multi-Sectoral Technical and Economic Cooperation (BIMSTEC) such as Bangladesh, Bhutan, India, Myanmar, Nepal, Sri Lanka and Thailand have been examined. Six CMIP5 models namely GFDL-CM3, GFDL-ESM2M, GFDL-ESM2G, HadGEM2-AO, HadGEM2-CC and HadGEM2-ES have been chosen for this study. The study period has been considered is from 1861 to 2100. From this period, initial 145 years i.e. 1861 to 2005 is reference or historical period and the later 95 years i.e. 2005 to 2100 is projected period. The climate change in the projected period has been examined with respect to the reference period. In order to validate the models, the mean annual rainfall and temperature has been compared with CRU over the reference period 1901 to 2005. Comparison reveals that most of the models are able to capture the spatial distribution of rainfall and temperature over most of the regions of BIMSTEC countries. Therefore these model data can be used to study the future changes in the 21st Century. Four out six models shows that the rainfall over Central and North India, Thailand and eastern part of Myanmar shows decreasing trend and Bangladesh, Bhutan, Nepal and Sri Lanka shows an increasing trend in both RCP 4.5 and 8.5 scenarios. In case of temperature, all of the models show an increasing trend over all the BIMSTEC countries in both scenarios, however, the rate of increase is relatively less over Sri Lanka than the other countries. Annual cycles of rainfall and temperature over Bangladesh, Myanmar and Thailand

MOLAR Progress Report 1/1997. March 1996 - March 1997. Measuring and modelling the dynamic responce of remote mountain lake ecosystems to environmental change: A programme of Mountain Lake Research - MOLAR

Energy Technology Data Exchange (ETDEWEB)

Wathne, Bente M [ed.

1997-07-19

MOLAR (Mountain Lake Research) is an extensive European cooperative research project with 23 partners. It is funded within the European Commission Framework Programme IV: Environment and Climate with assistance from INCO. It is coordinated by the Environmental Change Research Centre (ECRE) at University College London and the Norwegian Institute for Water Research (NIVA). The project has four major strands, also called Work Packages (WP), and the present report discusses the progress for the first working year of each WP. 19 refs., 1 fig.

EMF 9 scenario design (EMF WP 9.4)

International Nuclear Information System (INIS)

Anon.

1989-01-01

This paper describes the specifications of the scenarios selected by the EMF 9 Working Group, which is focusing on North American natural gas markets. The four first-round scenarios include: (1) an upper oil price path, (2) a lower oil price path, (3) a lower resource base, and (4) a higher gas demand due to policies and technologies affecting the electric utility sector. Each scenario represents a combination of market and regulatory environments. For example, the upper oil price scenario combines an upper oil price trend with a reference set of resource and demand conditions and with a pro-competitive regulatory environment. This scenario also serves as a control case for comparing the other scenarios, which specify a change in one of the environments for oil prices, resources, or demand. The regulatory environment has been maintained constant across these first-round scenarios but may be changed depending upon the later recommendations of the regulatory policy and market structure study group. The next section describes the detailed specifications for modelers in simulating the upper oil price scenario. Guidance is offered for energy prices, economic activity, and resource base estimates. The next three sections describe the other three scenarios that involve changes in these inputs from their values in the upper oil price scenario. Special wellhead price assumptions for stand-alone supply models and plans for developing inputs for Canadian models are then discussed. The final section describes the output variables to be reported to the EMF staff for comparing model results

Modification by preirradiation growth conditions of the shoulder of the UV fluence-survival curve of Escherichia coli B/r WP2 thy trp and changes in mutagenic response toward tryptophan prototrophy

International Nuclear Information System (INIS)

Doudney, C.O.

1978-01-01

The distinct three-section UV fluence-mutation frequency response (MFR) curve demonstrated in Escherichia coli strain B/r WP2 thy trp and its uvrA derivative supports the SOS hypothesis and suggests that trp + revertants can arise either from isolated lesions (1DM) plus SOS induction or from two lesions in proximity (2DM). Preirradiation growth on arabinose instead of glucose converted the fluence-survival curve from highly shouldered to exponential but did not affect the three-section MFR curve. Prestarvation of the uvrA + strain for typtophan, which drastically increases the expanse of the shoulder of the survival curve, greatly decreased both 1DM and 2DM. With the uvrA strain the increase in shoulder expanse after typtophan prestarvation was accompanied by greatly increased 2DM but no change in 1DM. Preincubation with chloramphenicol induced an even greater increase in 2DM response than amino acid prestarvation. Nalidixic acid, which prevents DNA accumulation, eliminated the response. (Auth.)

D2.3 - ENCOURAGE platform reference architecture

DEFF Research Database (Denmark)

Ferreira, Luis Lino; Pinho, Luis Miguel; Albano, Michele

2012-01-01

documents produced in work package WP2, the framework for the detailed specification activities to be developed in the technical work packages of the project (WP3-WP6). In order to provide the required background for the ENCOURAGE platform reference, the document describes the most relevant standards...... and functionalities of the modules of the architecture logical blocks. Furthermore, the document defines the main interface standards to be used for interoperability. These functionalities and interfaces will then be specified in detail in work packages WP3-WP6. Finally, the document provides the mapping...

Completion Report for Model Evaluation Well ER-5-5: Corrective Action Unit 98: Frenchman Flat

Energy Technology Data Exchange (ETDEWEB)

NSTec Underground Test Area and Boreholes Programs and Operations

2013-01-18

Model Evaluation Well ER-5-5 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of Nevada Environmental Management Operations at the Nevada National Security Site (formerly known as the Nevada Test Site). The well was drilled in July and August 2012 as part of a model evaluation well program in the Frenchman Flat area of Nye County, Nevada. The primary purpose of the well was to provide detailed geologic, hydrogeologic, chemical, and radiological data that can be used to test and build confidence in the applicability of the Frenchman Flat Corrective Action Unit flow and transport models for their intended purpose. In particular, this well was designed to obtain data to evaluate the uncertainty in model forecasts of contaminant migration from the upgradient underground nuclear test MILK SHAKE, conducted in Emplacement Hole U-5k in 1968, which were considered to be uncertain due to the unknown extent of a basalt lava-flow aquifer present in this area. Well ER-5-5 is expected to provide information to refine the Phase II Frenchman Flat hydrostratigraphic framework model, if necessary, as well as to support future groundwater flow and transport modeling. The 31.1-centimeter (cm) diameter hole was drilled to a total depth of 331.3 meters (m). The completion string, set at the depth of 317.2 m, consists of 16.8-cm stainless-steel casing hanging from 19.4-cm carbon-steel casing. The 16.8-cm stainless-steel casing has one slotted interval open to the basalt lava-flow aquifer and limited intervals of the overlying and underlying alluvial aquifer. A piezometer string was also installed in the annulus between the completion string and the borehole wall. The piezometer is composed of 7.3-cm stainless-steel tubing suspended from 6.0-cm carbon-steel tubing. The piezometer string was landed at 319.2 m, to monitor the basalt lava-flow aquifer. Data collected during and shortly after hole construction include

An SH2 domain model of STAT5 in complex with phospho-peptides define "STAT5 Binding Signatures".

Science.gov (United States)

Gianti, Eleonora; Zauhar, Randy J

2015-05-01

The signal transducer and activator of transcription 5 (STAT5) is a member of the STAT family of proteins, implicated in cell growth and differentiation. STAT activation is regulated by phosphorylation of protein monomers at conserved tyrosine residues, followed by binding to phospho-peptide pockets and subsequent dimerization. STAT5 is implicated in the development of severe pathological conditions, including many cancer forms. However, nowadays a few STAT5 inhibitors are known, and only one crystal structure of the inactive STAT5 dimer is publicly available. With a view to enabling structure-based drug design, we have: (1) analyzed phospho-peptide binding pockets on SH2 domains of STAT5, STAT1 and STAT3; (2) generated a model of STAT5 bound to phospho-peptides; (3) assessed our model by docking against a class of known STAT5 inhibitors (Müller et al. in ChemBioChem 9:723-727, 2008); (4) used molecular dynamics simulations to optimize the molecular determinants responsible for binding and (5) proposed unique "Binding Signatures" of STAT5. Our results put in place the foundations to address STAT5 as a target for rational drug design, from sequence, structural and functional perspectives.

An SH2 domain model of STAT5 in complex with phospho-peptides define ``STAT5 Binding Signatures''

Science.gov (United States)

Gianti, Eleonora; Zauhar, Randy J.

2015-05-01

The signal transducer and activator of transcription 5 (STAT5) is a member of the STAT family of proteins, implicated in cell growth and differentiation. STAT activation is regulated by phosphorylation of protein monomers at conserved tyrosine residues, followed by binding to phospho-peptide pockets and subsequent dimerization. STAT5 is implicated in the development of severe pathological conditions, including many cancer forms. However, nowadays a few STAT5 inhibitors are known, and only one crystal structure of the inactive STAT5 dimer is publicly available. With a view to enabling structure-based drug design, we have: (1) analyzed phospho-peptide binding pockets on SH2 domains of STAT5, STAT1 and STAT3; (2) generated a model of STAT5 bound to phospho-peptides; (3) assessed our model by docking against a class of known STAT5 inhibitors (Müller et al. in ChemBioChem 9:723-727, 2008); (4) used molecular dynamics simulations to optimize the molecular determinants responsible for binding and (5) proposed unique "Binding Signatures" of STAT5. Our results put in place the foundations to address STAT5 as a target for rational drug design, from sequence, structural and functional perspectives.

Study on coupling of three-dimension space time neutron kinetics model and RELAP5 and improvement of RELAP5

International Nuclear Information System (INIS)

Gui Xuewen; Cai Qi; Luo Bangqi

2007-01-01

A two-group three-dimension space-time neutron kinetics model is applied to the RELAP5 code, which replaces the point reactor kinetics model. A visual operation interface is designed to convenience interactive operation between operator and computer. The calculation results and practical applications indicate that the functions and precision of improved RELAP5 are enhanced and can be easily used. The improved RELAP5 has a good application perspective in nuclear power plant simulation. (authors)

The global precipitation response to volcanic eruptions in the CMIP5 models

International Nuclear Information System (INIS)

Iles, Carley E; Hegerl, Gabriele C

2014-01-01

We examine the precipitation response to volcanic eruptions in the Coupled Model Intercomparison Project Phase 5 (CMIP5) historical simulations compared to three observational datasets, including one with ocean coverage. Global precipitation decreases significantly following eruptions in CMIP5 models, with the largest decrease in wet tropical regions. This also occurs in observational land data, and ocean data in the boreal cold season. Monsoon rainfall decreases following eruptions in both models and observations. In response to individual eruptions, the ITCZ shifts away from the hemisphere with the greater concentration of aerosols in CMIP5. Models undergo a longer-lasting ocean precipitation response than over land, but the response in the short satellite record is too noisy to confirm this. We detect the influence of volcanism on precipitation in all three datasets in the cold season, although the models underestimate the size of the response. In the warm season the volcanic influence is only marginally detectable. (letter)

Testable flipped SU(5)xU(1){sub X} models

Energy Technology Data Exchange (ETDEWEB)

Jiang Jing [Institute of Theoretical Science, University of Oregon, Eugene, OR 97403 (United States); Li Tianjun [George P. and Cynthia W. Mitchell Institute for Fundamental Physics, Texas A and M University, College Station, TX 77843 (United States) and Institute of Theoretical Physics, Chinese Academy of Sciences, Beijing 100080 (China) and Department of Physics and Astronomy, Rutgers University, Piscataway, NJ 08854 (United States)]. E-mail: tjli@physics.rutgers.edu; Nanopoulos, Dimitri V. [George P. and Cynthia W. Mitchell Institute for Fundamental Physics, Texas A and M University, College Station, TX 77843 (United States); Astroparticle Physics Group, Houston Advanced Research Center (HARC), Mitchell Campus, Woodlands, TX 77381 (United States); Academy of Athens, Division of Natural Sciences, 28 Panepistimiou Avenue, Athens 10679 (Greece)

2007-06-11

The little hierarchy between the GUT scale and the string scale may give us some hints that can be tested at the LHC. To achieve string-scale gauge coupling unification, we introduce additional vector-like particles. We require that these vector-like particles be standard, form complete GUT multiplets, and have masses around the TeV scale or close to the string scale. Interestingly, only the flipped SU(5)xU(1){sub X} models can work elegantly. We consider all possible sets of vector-like particles with masses around the TeV scale. And we introduce vector-like particles with masses close to the string scale which can mimic the string-scale threshold corrections. We emphasize that all of these vector-like particles can be obtained in the interesting flipped SU(5)xU(1){sub X} string models from the four-dimensional free fermionic string construction. Assuming the low-energy supersymmetry, high-scale supersymmetry, and split supersymmetry, we show that the string-scale gauge coupling unification can indeed be achieved in the flipped SU(5)xU(1){sub X} models. These models can be tested at the LHC by observing simple sets of vector-like particles at the TeV scale. Moreover, we discuss a simple flipped SU(5)xU(1){sub X} model with string-scale gauge coupling unification and high-scale supersymmetry by introducing only one pair of the vector-like particles at the TeV scale, and we predict the corresponding Higgs boson masses. Also, we briefly comment on the string-scale gauge coupling unification in the model with low-energy supersymmetry by introducing only one pair of the vector-like particles at the intermediate scale. And we briefly comment on the mixings among the SM fermions and the corresponding extra vector-like particles.

Comparison of copepod collection efficiencies by three commonly used plankton nets: A case study in Bohai Sea, China

Science.gov (United States)

Chen, Hongju; Yu, Hao; Liu, Guangxing

2016-12-01

Selection of net with a suitable mesh size is a key concern in the quantitative assessment of zooplankton, which is crucial to understand pelagic ecosystem processes. This study compared the copepod collecting efficiency of three commonly used plankton nets, namely, the China standard coarse net (505 μm mesh), the China standard fine net (77 μm), and the WP-2 net (200 μm). The experiment was performed at six stations in the Bohai Sea during the autumn of 2012. The coarse net substantially under-sampled small individuals (body widths copepod species but failed to collect rare species. The WP-2 net appeared to be a compromise of the two other nets, collecting both small copepods and rare species. The abundance of copepods collected by the coarse net (126.4 ± 86.5 ind m-3) was one to two orders of magnitude lower than that by the WP-2 net (5802.4 ± 2595.4 ind m-3), and the value of the fine net (11117.0 ± 4563.41 ind m-3) was nearly twice that of the WP-2 net. The abundance of large copepods ( i.e., adult Calanus sinicus) in the three nets showed no significant differences, but the abundance of small copepods declined with decreasing mesh size. The difference in abundance resulted from the under-sampling of small copepods with body widths < 672 μm and < 266 μm by the coarse and WP-2 nets, respectively.

Whey protein improves HDL/non-HDL ratio and body weight gain in rats subjected to the resistance exercise

Directory of Open Access Journals (Sweden)

Kely Raspante Teixeira

2012-12-01

Full Text Available The aim of this study was to evaluate the effects of resistance exercise, such as weight-lifting (WL on the biochemical parameters of lipid metabolism and cardiovascular disease risk in the rats fed casein (control or whey protein (WP diets. Thirty-two male Fisher rats were randomly assigned to sedentary or exercise-trained groups and were fed control or WP diets. The WL program consisted of inducing the animals to perform the sets of jumps with weights attached to the chest. After seven weeks, arteriovenous blood samples were collected for analysis. The WL or WP ingestion were able to improve the lipid profile, reducing the TC and non-HDL cholesterol concentrations, but only WP treatment significantly increased the serum HDL concentrations, thereby also affecting the TC/HDL and HDL/non-HDL ratios. However, WL plus WP was more effective in improving the HDL/non-HDL ratio than the exercise or WP ingestion alone and the body weight gain than exercise without WP ingestion.

The search for a realistic flipped SU(5) string model

Energy Technology Data Exchange (ETDEWEB)

Lopez, J.L. (Center for Theoretical Physics, Texas A and M Univ., College Station, TX (United States) Astroparticle Physics Group, Houston Advanced Research Center (HARC), The Woodlands, TX (United States)); Nanopoulos, D.V. (Center for Theoretical Physics, Texas A and M Univ., College Station, TX (United States) Astroparticle Physics Group, Houston Advanced Research Center (HARC), The Woodlands, TX (United States)); Yuan, K. (Department of Physics and Astronomy, University of Alabama, Tuscaloosa, AL (United States))

1993-07-05

We present an extensive search for a class of flipped SU(5) models built within the free fermionic formulation of the heterotic string. We describe a set of algorithms which constitute the basis for a computer program capable of generating systematically the massless spectrum and the superpotential of all possible models within the class we consider. Our search through the huge parameter space to be explored is simplified considerably by the constraint of N=1 spacetime supersymmetry and the need for extra Q, anti Q representations beyond the standard ones in order to possibly achieve string gauge coupling unification at scales of O(10[sup 18] GeV). Our results are remarkably simple and evidence the large degree of redundancy in this kind of constructions. We find one model with gauge group SU(5)xU(1)sub(Y tilde)xSO(10)[sub h]xSU(4)[sub h]xU(1)[sup 5] and fairly acceptable phenomenological properties. We study the D- and F-flatness constraints and the symmetry breaking pattern in this model and conclude that string gauge coupling unification is quite possible. (orig.)

Cloud radiative effects and changes simulated by the Coupled Model Intercomparison Project Phase 5 models

Science.gov (United States)

Shin, Sun-Hee; Kim, Ok-Yeon; Kim, Dongmin; Lee, Myong-In

2017-07-01

Using 32 CMIP5 (Coupled Model Intercomparison Project Phase 5) models, this study examines the veracity in the simulation of cloud amount and their radiative effects (CREs) in the historical run driven by observed external radiative forcing for 1850-2005, and their future changes in the RCP (Representative Concentration Pathway) 4.5 scenario runs for 2006-2100. Validation metrics for the historical run are designed to examine the accuracy in the representation of spatial patterns for climatological mean, and annual and interannual variations of clouds and CREs. The models show large spread in the simulation of cloud amounts, specifically in the low cloud amount. The observed relationship between cloud amount and the controlling large-scale environment are also reproduced diversely by various models. Based on the validation metrics, four models—ACCESS1.0, ACCESS1.3, HadGEM2-CC, and HadGEM2-ES—are selected as best models, and the average of the four models performs more skillfully than the multimodel ensemble average. All models project global-mean SST warming at the increase of the greenhouse gases, but the magnitude varies across the simulations between 1 and 2 K, which is largely attributable to the difference in the change of cloud amount and distribution. The models that simulate more SST warming show a greater increase in the net CRE due to reduced low cloud and increased incoming shortwave radiation, particularly over the regions of marine boundary layer in the subtropics. Selected best-performing models project a significant reduction in global-mean cloud amount of about -0.99% K-1 and net radiative warming of 0.46 W m-2 K-1, suggesting a role of positive feedback to global warming.

CM5: A pre-Swarm magnetic field model based upon the comprehensive modeling approach

DEFF Research Database (Denmark)

Sabaka, T.; Olsen, Nils; Tyler, Robert

2014-01-01

We have developed a model based upon the very successful Comprehensive Modeling (CM) approach using recent CHAMP, Ørsted, SAC-C and observatory hourly-means data from September 2000 to the end of 2013. This CM, called CM5, was derived from the algorithm that will provide a consistent line of Leve...

RELAP5 kinetics model development for the Advanced Test Reactor

International Nuclear Information System (INIS)

Judd, J.L.; Terry, W.K.

1990-01-01

A point-kinetics model of the Advanced Test Reactor has been developed for the RELAP5 code. Reactivity feedback parameters were calculated by a three-dimensional analysis with the PDQ neutron diffusion code. Analyses of several hypothetical reactivity insertion events by the new model and two earlier models are discussed. 3 refs., 10 figs., 6 tabs

Soil carbon model alternatives for ECHAM5/JSBACH climate model: Evaluation and impacts on global carbon cycle estimates

DEFF Research Database (Denmark)

Thum, T.; Raisanen, P.; Sevanto, S.

2011-01-01

The response of soil organic carbon to climate change might lead to significant feedbacks affecting global warming. This response can be studied by coupled climate-carbon cycle models but so far the description of soil organic carbon cycle in these models has been quite simple. In this work we used...... the coupled climate-carbon cycle model ECHAM5/JSBACH (European Center/Hamburg Model 5/Jena Scheme for Biosphere-Atmosphere Coupling in Hamburg) with two different soil carbon modules, namely (1) the original soil carbon model of JSBACH called CBALANCE and (2) a new soil carbon model Yasso07, to study...... the interaction between climate variability and soil organic carbon. Equivalent ECHAM5/JSBACH simulations were conducted using both soil carbon models, with freely varying atmospheric CO2 for the last 30 years (1977-2006). In this study, anthropogenic CO2 emissions and ocean carbon cycle were excluded. The new...

Three-generation flipped SU(5) string models on orbifolds

Energy Technology Data Exchange (ETDEWEB)

Burwick, T.T. (Zurich Univ. (Switzerland). Inst. fuer Theoretische Physik); Kaiser, R.K.; Mueller, H.F. (ETH-Hoenggerberg, Zurich (Switzerland). Inst. fuer Theoretische Physik)

1991-09-16

We construct four-dimensional twisted string models on non-prime orbifolds which have as gauge group flipped SU(5) with a phenomenologically interesting matter spectrum of k generations plus (k-3) antigenerations. Using generalized selection rules for Yukawa couplings on non-prime orbifolds, we analyse one model in greater detail and obtain the following phenomenologically promising features: We find one pair of H and anti H GUT Higgs fields which break the GUT gauge group into the standard model, and in addition generate large mass terms for the unwanted triplet parts of the standard model Higgs fields, plus one pair of standard model Higgs fields. Moreover, we obtain couplings of the standard model Higgs to quark and lepton fields in all families. (orig.).

2.5-D frequency-domain viscoelastic wave modelling using finite-element method

Science.gov (United States)

Zhao, Jian-guo; Huang, Xing-xing; Liu, Wei-fang; Zhao, Wei-jun; Song, Jian-yong; Xiong, Bin; Wang, Shang-xu

2017-10-01

2-D seismic modelling has notable dynamic information discrepancies with field data because of the implicit line-source assumption, whereas 3-D modelling suffers from a huge computational burden. The 2.5-D approach is able to overcome both of the aforementioned limitations. In general, the earth model is treated as an elastic material, but the real media is viscous. In this study, we develop an accurate and efficient frequency-domain finite-element method (FEM) for modelling 2.5-D viscoelastic wave propagation. To perform the 2.5-D approach, we assume that the 2-D viscoelastic media are based on the Kelvin-Voigt rheological model and a 3-D point source. The viscoelastic wave equation is temporally and spatially Fourier transformed into the frequency-wavenumber domain. Then, we systematically derive the weak form and its spatial discretization of 2.5-D viscoelastic wave equations in the frequency-wavenumber domain through the Galerkin weighted residual method for FEM. Fixing a frequency, the 2-D problem for each wavenumber is solved by FEM. Subsequently, a composite Simpson formula is adopted to estimate the inverse Fourier integration to obtain the 3-D wavefield. We implement the stiffness reduction method (SRM) to suppress artificial boundary reflections. The results show that this absorbing boundary condition is valid and efficient in the frequency-wavenumber domain. Finally, three numerical models, an unbounded homogeneous medium, a half-space layered medium and an undulating topography medium, are established. Numerical results validate the accuracy and stability of 2.5-D solutions and present the adaptability of finite-element method to complicated geographic conditions. The proposed 2.5-D modelling strategy has the potential to address modelling studies on wave propagation in real earth media in an accurate and efficient way.

Passive hybridization of a photovoltaic module with lithium-ion battery cells: A model-based analysis

Science.gov (United States)

Joos, Stella; Weißhar, Björn; Bessler, Wolfgang G.

2017-04-01

Standard photovoltaic battery systems based on AC or DC architectures require power electronics and controllers, including inverters, MPP tracker, and battery charger. Here we investigate an alternative system design based on the parallel connection of a photovoltaic module with battery cells without any intermediate voltage conversion. This approach, for which we use the term passive hybridization, is based on matching the solar cell's and battery cell's respective current/voltage behavior. A battery with flat discharge characteristics can allow to pin the solar cell to its maximum power point (MPP) independently of the external power consumption. At the same time, upon battery full charge, voltage increase will drive the solar cell towards zero current and therefore self-prevent battery overcharge. We present a modeling and simulation analysis of passively hybridizing a 5 kWp PV system with a 5 kWh LFP/graphite lithium-ion battery. Dynamic simulations with 1-min time resolution are carried out for three exemplary summer and winter days using historic weather data and a synthetic single-family household consumer profile. The results demonstrate the feasibility of the system. The passive hybrid allows for high self-sufficiencies of 84.6% in summer and 25.3% in winter, which are only slightly lower than those of a standard system.

Waterpipe (Hookah) Smoking Among Youth and Women in Canada is New, not Traditional.

Science.gov (United States)

Hammal, Fadi; Wild, T Cameron; Nykiforuk, Candace; Abdullahi, Khadija; Mussie, Dawit; Finegan, Barry A

2016-05-01

When asserting the right of individuals to be free to smoke a hookah (waterpipe [WP]) in public places, the "cultural" importance of the practice is often cited. The purpose of this study was to explore the cultural significance of WP smoking. Qualitative methods were used to elicit the views of groups of WP smokers from different cultural backgrounds. Sixteen group discussion sessions with a total of 75 WP smokers aged between 18 and 30 were conducted. A few participants saw culture as a factor supporting WP smoking initiation and maintenance. The vast majority indicated that WPs being perceived as "healthier" than cigarettes, and the availability of flavored shisha as important factors in their initiation and ongoing use. Most started smoking before the age of 18 calling it a "high school thing" and admitted that they had easy access to WP cafés. Many indicated that they did not know if they were smoking tobacco or a "herbal" substance. Peer influence, availability of flavored products and facile access to WP cafés are major factors in WP initiation. Ethno-cultural traditions play only a minor role. The assertion that cultural traditions and practice are inherent in WP smoking as implied by media and marketing was not supported by our findings. Contemporary use of WP is spreading among new non-traditional users. Lack of knowledge about the harms of WP smoking indicates a need for education and regulation to require packaging and health warning labels and restrictions on access, especially to minors. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Visualizing projected Climate Changes - the CMIP5 Multi-Model Ensemble

Science.gov (United States)

Böttinger, Michael; Eyring, Veronika; Lauer, Axel; Meier-Fleischer, Karin

2017-04-01

Large ensembles add an additional dimension to climate model simulations. Internal variability of the climate system can be assessed for example by multiple climate model simulations with small variations in the initial conditions or by analyzing the spread in large ensembles made by multiple climate models under common protocols. This spread is often used as a measure of uncertainty in climate projections. In the context of the fifth phase of the WCRP's Coupled Model Intercomparison Project (CMIP5), more than 40 different coupled climate models were employed to carry out a coordinated set of experiments. Time series of the development of integral quantities such as the global mean temperature change for all models visualize the spread in the multi-model ensemble. A similar approach can be applied to 2D-visualizations of projected climate changes such as latitude-longitude maps showing the multi-model mean of the ensemble by adding a graphical representation of the uncertainty information. This has been demonstrated for example with static figures in chapter 12 of the last IPCC report (AR5) using different so-called stippling and hatching techniques. In this work, we focus on animated visualizations of multi-model ensemble climate projections carried out within CMIP5 as a way of communicating climate change results to the scientific community as well as to the public. We take a closer look at measures of robustness or uncertainty used in recent publications suitable for animated visualizations. Specifically, we use the ESMValTool [1] to process and prepare the CMIP5 multi-model data in combination with standard visualization tools such as NCL and the commercial 3D visualization software Avizo to create the animations. We compare different visualization techniques such as height fields or shading with transparency for creating animated visualization of ensemble mean changes in temperature and precipitation including corresponding robustness measures. [1] Eyring, V

Água disponível em um Latossolo Vermelho argiloso e murcha fisiológica de culturas Available water in a clayey Oxisol and physiological wilting of crops

Directory of Open Access Journals (Sweden)

Vilson A. Klein

2006-09-01

Full Text Available Para a determinação do volume de água retido no solo e disponível às plantas, é imprescindível quantificar o teor de água do solo (TAS na capacidade de campo (CC e no ponto de murcha permanente (PMP. O objetivo deste trabalho foi comparar os valores do TAS na CC e no PMP determinados por distintos métodos. Utilizaram-se amostras de um Latossolo Vermelho. A CC foi obtida no campo com o método do perfil instantâneo e, no laboratório, com funis de placa porosa. O PMP foi determinado, em laboratório, como sendo o teor de água residual retida no potencial matricial de -1,5 MPa, em câmara de Richards e com medidor de potencial de ponto de orvalho WP4 PotentiaMeter. Para murcha das plantas, o TAS foi significativamente menor no método fisiológico que o determinado nas câmaras de Richards; entretanto, o teor de água do solo no PMP foi estatisticamente igual para a cultura do girassol e superior para o milho, quando comparado com aquele obtido pelo WP4. A água disponível diminuiu com o aumento na tensão para a estimativa da CC e com o método WP4, mas não diferiu do método fisiológico. Assim, o WP4 permitiu adequada estimativa do PMP e disponibilidade hídrica às plantas, em solo argiloso.To estimate available soil water to plants it is necessary to measure field capacity (FC and permanent wilting point (PWP. The objective of this study was to compare soil moisture at FC and PWP measured by different methods. The soil used was a tropical Oxisol (Haplorthox. The FC was measured under field conditions, using the internal drainage method and in laboratory using porous plate funnel. The PWP was quantified in laboratory as the soil moisture at -1.5 MPa matric potential measured by pressure plate apparatus (Richards chamber and by WP4 dewpoint Potentia Meter. The physiological PWP was measured using corn and sunflower plants, when they had three leaf pairs and showed irreversible wilting. The soil moisture for PWP based on the

TRANSPORT AND EMPLACEMENT EQUIPMENT DESCRIPTIONS

International Nuclear Information System (INIS)

1997-01-01

The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) Transport and Emplacement in the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. The Transport and Emplacement equipment described in this document consists of the following: (1) WP Transporter; (2) Reusable Rail Car; (3) Emplacement Gantry; (4) Gantry Carrier; and (5) Transport Locomotive

Quantifying PM2.5-Meteorology Sensitivities in a Global Climate Model

Science.gov (United States)

Westervelt, D. M.; Horowitz, L. W.; Naik, V.; Tai, A. P. K.; Fiore, A. M.; Mauzerall, D. L.

2016-01-01

Climate change can influence fine particulate matter concentrations (PM2.5) through changes in air pollution meteorology. Knowledge of the extent to which climate change can exacerbate or alleviate air pollution in the future is needed for robust climate and air pollution policy decision-making. To examine the influence of climate on PM2.5, we use the Geophysical Fluid Dynamics Laboratory Coupled Model version 3 (GFDL CM3), a fully-coupled chemistry-climate model, combined with future emissions and concentrations provided by the four Representative Concentration Pathways (RCPs). For each of the RCPs, we conduct future simulations in which emissions of aerosols and their precursors are held at 2005 levels while other climate forcing agents evolve in time, such that only climate (and thus meteorology) can influence PM2.5 surface concentrations. We find a small increase in global, annual mean PM2.5 of about 0.21 micro-g/cu m3 (5%) for RCP8.5, a scenario with maximum warming. Changes in global mean PM2.5 are at a maximum in the fall and are mainly controlled by sulfate followed by organic aerosol with minimal influence of black carbon. RCP2.6 is the only scenario that projects a decrease in global PM2.5 with future climate changes, albeit only by -0.06 micro-g/cu m (1.5%) by the end of the 21st century. Regional and local changes in PM2.5 are larger, reaching upwards of 2 micro-g/cu m for polluted (eastern China) and dusty (western Africa) locations on an annually averaged basis in RCP8.5. Using multiple linear regression, we find that future PM2.5 concentrations are most sensitive to local temperature, followed by surface wind and precipitation. PM2.5 concentrations are robustly positively associated with temperature, while negatively related with precipitation and wind speed. Present-day (2006-2015) modeled sensitivities of PM2.5 to meteorological variables are evaluated against observations and found to agree reasonably well with observed sensitivities (within 10e50

Report on geotechnical tests with model structures Work Package - Deliverable number: WP 7.2 – D72.2

DEFF Research Database (Denmark)

Gintautas, Tomas; Sørensen, John Dalsgaard

2017-01-01

This report aims to give a comprehensive summary of the geotechnical tests with model structures that have been performed in work package 7.2 task 7.2.2 within the IRPWIND project. The large-scale tests are intended to determine soil-structure interaction effects in order to support probabilistic...... calculations of the reliability of offshore wind turbine support structures. These calculations are mainly performed in work package 7.4 of the IRPWIND project. However, this report already includes the development of a probabilistic model for the axial bearing capacity / resistance that is obtained using...

BVOC-aerosol-climate interactions in the global aerosol-climate model ECHAM5.5-HAM2

Directory of Open Access Journals (Sweden)

R. Makkonen

2012-11-01

Full Text Available The biosphere emits volatile organic compounds (BVOCs which, after oxidation in the atmosphere, can partition on the existing aerosol population or even form new particles. The large quantities emitted provide means for a large potential impact on both aerosol direct and indirect effects. Biogenic responses to atmospheric temperature change can establish feedbacks even in rather short timescales. However, due to the complexity of organic aerosol partitioning, even the sign of these feedbacks is of large uncertainty. We use the global aerosol-climate model ECHAM5.5-HAM2 to explore the effect of BVOC emissions on new particle formation, clouds and climate. Two BVOC emission models, MEGAN2 and LPJ-GUESS, are used. MEGAN2 shows a 25% increase while LPJ-GUESS shows a slight decrease in global BVOC emission between years 2000 and 2100. The change of shortwave cloud forcing from year 1750 to 2000 ranges from −1.4 to −1.8 W m⁻² with 5 different nucleation mechanisms. We show that the change in shortwave cloud forcing from the year 2000 to 2100 ranges from 1.0 to 1.5 W m⁻². Although increasing future BVOC emissions provide 3–5% additional CCN, the effect on the cloud albedo change is modest. Due to simulated decreases in future cloud cover, the increased CCN concentrations from BVOCs can not provide significant additional cooling in the future.

Detection of occult hepatitis B and window period infection among blood donors by individual donation nucleic acid testing in a tertiary care center in South India.

Science.gov (United States)

Keechilot, Cinzia S; Shenoy, Veena; Kumar, Anil; Biswas, Lalitha; Vijayrajratnam, Sukhithasri; Dinesh, Kavitha; Nair, Prem

With the introduction of highly sensitive hepatitis B surface antigen immunoassay, transfusion associated HBV infection have reduced drastically but they still tend to occur due to blood donors with occult hepatitis B infection (OBI) and window period (WP) infection. Sera from, 24338 healthy voluntary blood donors were screened for HBsAg, HIV and HCV antibody using Vitros Enhanced Chemiluminescent Immunoassay. The median age of the donor population was 30 (range 18-54) with male preponderance (98%). All serologically negative samples were screened by nucleic acid testing (NAT) for viral DNA and RNA. NAT-positive samples were subjected to discriminatory NAT for HBV, HCV, and HIV and all samples positive for HBV DNA were tested for anti-HBc, anti-HBs, HBeAg. Viral load was determined using artus HBV RG PCR Kit. Of the 24,338 donors screened, 99.81% (24292/24338) were HBsAg negative of which NAT was positive for HBV DNA in 0.0205% (5/24292) donors. Four NAT positive donors had viral load of <200 IU/ml making them true cases of OBI. One NAT positive donor was negative for all antibodies making it a case of WP infection. Among OBI donors, 75% (3/4) were immune and all were negative for HBeAg. Precise HBV viral load could not be determined in all (5/5) NAT positive donors due to viral loads below the detection limit of the artus HBV RG PCR Kit. The overall incidence of OBI and WP infections was found to be low at 1 in 6503 and 1 in 24214 donations, respectively. More studies are needed to determine the actual burden of WP infections in Indian blood donors.

Modeling Math Growth Trajectory--An Application of Conventional Growth Curve Model and Growth Mixture Model to ECLS K-5 Data

Science.gov (United States)

Lu, Yi

2016-01-01

To model students' math growth trajectory, three conventional growth curve models and three growth mixture models are applied to the Early Childhood Longitudinal Study Kindergarten-Fifth grade (ECLS K-5) dataset in this study. The results of conventional growth curve model show gender differences on math IRT scores. When holding socio-economic…

Molecular Phylogeny Of Microbes In The Deep-Sea Sediments From Tropical West Pacific Warm Pool

Science.gov (United States)

Wang, F.; Xiao, X.; Wang, P.

2005-12-01

The presence and phylogeny of bacteria and archaea in five deep-sea sediment samples collected from west Pacific Warm Pool area (WP-0, WP-1, WP-2, WP-3, WP-4), and in five sediment layers (1cm-, 3cm-, 6cm-, 10cm-, 12cm- layer) of the 12-cm sediment core of WP-0 were checked and compared. The microbial diversity in the five deep-sea sediments were similar as revealed by denaturing gradient gel electrophoresis, and all of them contained members of non-thermophilic marine group I crenarchaeota as the predominant archaeal group. The composition of methylotrophs including methanotrophs, sulfate reducing bacteria in the WP-0 sediment core were further investigated by molecular marker based analysis of mxaF, pmoA, dsrAB, specific anoxic methane oxidation archaeal and sulfate reducing bacterial 16S rRNA genes. From MxaF amino acid sequence analysis, it was demonstrated that microbes belonging to α - Proteobacteria most related to Hyphomicrobium and Methylobacterium were dominant aerobic methylotrophs in this deep-sea sediment; and small percentage of type II methanotrophs affiliating closest to Methylocystis and Methylosinus were also detected in this environment. mxaF quantitative PCR results showed that in the west Pacific WP sediment there existed around 3× 10 4-5 methylotrophs per gram sediment, 10-100 times more than that in samples collected from several other deep-sea Pacific sediment sample, but about 10 times less than that present in samples collected from rice and flower garden soil. Diverse groups of novel archaea (named as WPA), not belonging to any known archaeal lineages were checked out. They could be placed in the euryarchaeota kingdom, separated into two distinct groups, the main group was peripherally related with methanogens, the other group related with Thermoplasma. Possible sulfate reducing bacterial related with Desulfotomaculum, Desulfacinum, Desulfomonile and Desulfanuticus were also detected in our study. The vertical distributions of WPA

OCRWM Science and Technology Program Cementitious Materials Technologies

International Nuclear Information System (INIS)

DOE

2004-01-01

This potential project will develop and test cost effective cementitious materials for construction of Yucca Mountain (YM) inverts, drift liners, and bulkheads. These high silica cementitious materials will be designed to buffer the pH and Eh of the groundwater, to slow corrosion of waste packages (WP), and to retard radionuclide migration. While being compatible with YM repository systems, these materials are expected to be less expensive to produce, and as strong, and more durable than ordinary Portland Cement (OPC). Therefore, building out the repository with these cementitious materials may significantly reduce these costs and reduce uncertainty in short-( 10,000 yr) repository performance. Both laboratory development and natural analog studies are anticipated using a unique combination of expertise at ORNL, UT, UC Berkeley, and Minatom to develop and test high-silica hydraulic, cementitious binders for use at YM. The major tasks of this project are to (1) formulate and make candidate cementitious materials using high-silica hydraulic hinders, (2) measure the physical and chemical properties of these materials, (3) expose combinations of these materials and WP materials to static and flowing YM groundwater at temperatures consistent with the expected repository conditions, (4) examine specimens of both the cementitious materials and WP materials periodically for chemical and mineralogical changes to determine reaction mechanisms and kinetics, and (5) predict the long-term performance of the material by thermodynamic and transport modeling and by comparisons with natural analogs

Evaluation of CASL boiling model for DNB performance in full scale 5x5 fuel bundle with spacer grids

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Jun [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2018-02-12

As one of main tasks for FY17 CASL-THM activity, Evaluation study on applicability of the CASL baseline boiling model for 5x5 DNB application is conducted and the predictive capability of the DNB analysis is reported here. While the baseline CASL-boiling model (GEN- 1A) approach has been successfully implemented and validated with a single pipe application in the previous year’s task, the extended DNB validation for realistic sub-channels with detailed spacer grid configurations are tasked in FY17. The focus area of the current study is to demonstrate the robustness and feasibility of the CASL baseline boiling model for DNB performance in a full 5x5 fuel bundle application. A quantitative evaluation of the DNB predictive capability is performed by comparing with corresponding experimental measurements (i.e. reference for the model validation). The reference data are provided from the Westinghouse Electricity Company (WEC). Two different grid configurations tested here include Non-Mixing Vane Grid (NMVG), and Mixing Vane Grid (MVG). Thorough validation studies with two sub-channel configurations are performed at a wide range of realistic PWR operational conditions.

Improvement of the RELAP5 subcooled boiling model for low pressure conditions

International Nuclear Information System (INIS)

Koncar, B.; Mavko, B.

2000-01-01

The RELAP5/MOD3.2.2 Gamma code was assessed against low pressure subcooled boiling experiments performed by Zeitoun and Shoukri [1] in a vertical annulus. The predictions of subcooled boiling bubbly flow showed that the present version of the RELAP5 code underestimates the void fraction growth along the tube. To improve the void fraction prediction at low pressure conditions a set of model changes is proposed, which includes modifications of bubbly-slug transition criterion, drift-flux model, interphase heat transfer coefficient and wall evaporation modeling. The improved experiment predictions with the modified RELAP5 code are presented and analysed. (author)

Levels of prospective science teachers’ ability to structure 5E model

Directory of Open Access Journals (Sweden)

Kaçan Sibel Demir

2017-01-01

Full Text Available The research was conducted with 3rd year prospective science students, who study at the science teaching department of a university in Istanbul province. For that purpose, 34 prospective science teachers cooperated and participated in the study. In the study, the prospective teachers were asked to select a certain subject and plan that subject in accordance with the 5E model. Therefore, the objective of the study is to determine the levels of prospective science teachers’ ability to structure the 5E model. The data retrieved from the study were analyzed ad compared through content analysis and percentages. The results of the study suggest that some prospective teachers are not sufficient at each phase of the 5E model, thereby the researchers made suggestions for that situation.