... COMMISSION In the Matter of Certain Video Analytics Software, Systems, Components Thereof, and Products... analytics software, systems, components thereof, and products containing same by reason of infringement of... after importation of certain video analytics software, systems, components thereof, and products...
... COMMISSION Certain Video Analytics Software, Systems, Components Thereof, and Products Containing Same... analytics software, systems, components thereof, and products containing same by reason of infringement of... after importation of certain video analytics software, systems, components thereof, and products...
... COMMISSION Certain Video Analytics Software, Systems, Components Thereof, and Products Containing Same... Trade Commission has received a complaint entitled Certain Video Analytics Software, Systems, Components... analytics software, systems, components thereof, and products containing same. The complaint names as...
... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Video Analytics Software, Systems, Components Thereof, and Products Containing Same... the United States after importation of certain video analytics software systems, components thereof...
... COMMISSION Certain Video Analytics Software, Systems, Components Thereof, and Products Containing Same... certain video analytics software, systems, components thereof, and products containing same by reason of..., Inc. The remaining respondents are Bosch Security Systems, Inc.; Robert Bosch GmbH; Bosch...
... COMMISSION Certain Video Analytics Software, Systems, Components Thereof, and Products Containing Same... States after importation of certain video analytics software, systems, components thereof, and products...; Bosch Security Systems, Inc. of Fairpoint, New York; Samsung Techwin Co., Ltd. of Seoul, Korea; Samsung...
Lee, Kang Oh; Nakaji, Kei; 中司, 敬
A web-based video direct e-commerce system was developed to solve the problems in the internet shopping and to increase trust in safety and quality of agricultural products from consumers. We found that the newly developed e-commerce system could overcome demerits of the internet shopping and give consumers same effects as purchasing products offline. Producers could have opportunities to explain products and to talk to customers and get increased income because of maintaining a certain numbe...
Gustafson, Peter C.
For many years, photogrammetry has been in use at TRW. During that time, needs have arisen for highly repetitive measurements. In an effort to satisfy these needs in a timely manner, a specialized Robotic Video Photogrammetry System (RVPS) was developed by TRW in conjunction with outside vendors. The primary application for the RVPS has strict accuracy requirements that demand significantly more images than the previously used film-based system. The time involved in taking these images was prohibitive but by automating the data acquisition process, video techniques became a practical alternative to the more traditional film- based approach. In fact, by applying video techniques, measurement productivity was enhanced significantly. Analysis involved was also brought `on-board' to the RVPS, allowing shop floor acquisition and delivery of results. The RVPS has also been applied in other tasks and was found to make a critical improvement in productivity, allowing many more tests to be run in a shorter time cycle. This paper will discuss the creation of the system and TRW's experiences with the RVPS. Highlighted will be the lessons learned during these efforts and significant attributes of the process not common to the standard application of photogrammetry for industrial measurement. As productivity and ease of use continue to drive the application of photogrammetry in today's manufacturing climate, TRW expects several systems, with technological improvements applied, to be in use in the near future.
Otrel-Cass, Kathrin; Khalid, Md. Saifuddin
With an interest in learning that is set in collaborative situations, the data session presents excerpts from video data produced by two of fifteen students from a class of 5th semester techno-anthropology course. Students used video cameras to capture the time they spent working with a scientist...... video, nature of the interactional space, and material and spatial semiotics....
Fageth, Reiner; Weiting, Ralf
Videos can be taken with nearly every camera, digital point and shoot cameras, DSLRs as well as smartphones and more and more with so-called action cameras mounted on sports devices. The implementation of videos while generating QR codes and relevant pictures out of the video stream via a software implementation was contents in last years' paper. This year we present first data about what contents is displayed and how the users represent their videos in printed products, e.g. CEWE PHOTOBOOKS and greeting cards. We report the share of the different video formats used, the number of images extracted out of the video in order to represent the video, the positions in the book and different design strategies compared to regular books.
Schlecht, Leslie E.; Kutler, Paul (Technical Monitor)
This is a proposal for a general use system based, on the SGI IRIS workstation platform, for recording computer animation to videotape. In addition, this system would provide features for simple editing and enhancement. Described here are a list of requirements for the system, and a proposed configuration including the SGI VideoLab Integrator, VideoMedia VLAN animation controller and the Pioneer rewritable laserdisc recorder.
This comprehensive and accessible text/reference presents an overview of the state of the art in video coding technology. Specifically, the book introduces the tools of the AVS2 standard, describing how AVS2 can help to achieve a significant improvement in coding efficiency for future video networks and applications by incorporating smarter coding tools such as scene video coding. Topics and features: introduces the basic concepts in video coding, and presents a short history of video coding technology and standards; reviews the coding framework, main coding tools, and syntax structure of AV
Belonging to the wider academic field of computer vision, video analytics has aroused a phenomenal surge of interest since the current millennium. Video analytics is intended to solve the problem of the incapability of exploiting video streams in real time for the purpose of detection or anticipation. It involves analyzing the videos using algorithms that detect and track objects of interest over time and that indicate the presence of events or suspect behavior involving these objects.The aims of this book are to highlight the operational attempts of video analytics, to identify possi
Greenwoll, D.A.; Matter, J.C. (Sandia National Labs., Albuquerque, NM (United States)); Ebel, P.E. (BE, Inc., Barnwell, SC (United States))
The purpose of this NUREG is to present technical information that should be useful to NRC licensees in designing closed-circuit television systems for video alarm assessment. There is a section on each of the major components in a video system: camera, lens, lighting, transmission, synchronization, switcher, monitor, and recorder. Each section includes information on component selection, procurement, installation, test, and maintenance. Considerations for system integration of the components are contained in each section. System emphasis is focused on perimeter intrusion detection and assessment systems. A glossary of video terms is included. 13 figs., 9 tabs.
The main goal of this thesis project is to introduce latest media technology and provide a complete guideline. This project is based on the production of 360° video by using multiple GoPro cameras. This project was the first 360° video project at Helsinki Metropolia University of Applied Sciences. 360° video is a video with a totally different viewing experience and incomparable features on it. 360° x 180° video coverage and active participation from viewers are the best part of this vid...
Offering ready access to the security industry's cutting-edge digital future, Intelligent Network Video provides the first complete reference for all those involved with developing, implementing, and maintaining the latest surveillance systems. Pioneering expert Fredrik Nilsson explains how IP-based video surveillance systems provide better image quality, and a more scalable and flexible system at lower cost. A complete and practical reference for all those in the field, this volume:Describes all components relevant to modern IP video surveillance systemsProvides in-depth information about ima
Hsu, Charles; Szu, Harold
An intelligent video surveillance system is able to detect and identify abnormal and alarming situations by analyzing object movement. The Smart Sensing Surveillance Video (S3V) System is proposed to minimize video processing and transmission, thus allowing a fixed number of cameras to be connected on the system, and making it suitable for its applications in remote battlefield, tactical, and civilian applications including border surveillance, special force operations, airfield protection, perimeter and building protection, and etc. The S3V System would be more effective if equipped with visual understanding capabilities to detect, analyze, and recognize objects, track motions, and predict intentions. In addition, alarm detection is performed on the basis of parameters of the moving objects and their trajectories, and is performed using semantic reasoning and ontologies. The S3V System capabilities and technologies have great potential for both military and civilian applications, enabling highly effective security support tools for improving surveillance activities in densely crowded environments. It would be directly applicable to solutions for emergency response personnel, law enforcement, and other homeland security missions, as well as in applications requiring the interoperation of sensor networks with handheld or body-worn interface devices.
Alsmirat, Mohammad Abdullah
Video streaming has recently grown dramatically in popularity over the Internet, Cable TV, and wire-less networks. Because of the resource demanding nature of video streaming applications, maximizing resource utilization in any video streaming system is a key factor to increase the scalability and decrease the cost of the system. Resources to…
Full Text Available Video surveillance system senses and trails out all the threatening issues in the real time environment. It prevents from security threats with the help of visual devices which gather the information related to videos like CCTV’S and IP (Internet Protocol cameras. Video surveillance system has become a key for addressing problems in the public security. They are mostly deployed on the IP based network. So, all the possible security threats exist in the IP based application might also be the threats available for the reliable application which is available for video surveillance. In result, it may increase cybercrime, illegal video access, mishandling videos and so on. Hence, in this paper an intelligent model is used to propose security for video surveillance system which ensures safety and it provides secured access on video.
Ge, Jing; Zhang, Guoping; Yang, Zongkai
Multimedia technology and networks protocol are the basic technology of the video surveillance system. A network remote video surveillance system based on MPEG-4 video coding standards is designed and implemented in this paper. The advantages of the MPEG-4 are analyzed in detail in the surveillance field, and then the real-time protocol and real-time control protocol (RTP/RTCP) are chosen as the networks transmission protocol. The whole system includes video coding control module, playing back module, network transmission module and network receiver module The scheme of management, control and storage about video data are discussed. The DirectShow technology is used to playback video data. The transmission scheme of digital video processing in networks, RTP packaging of MPEG-4 video stream is discussed. The receiver scheme of video date and mechanism of buffer are discussed. The most of the functions are archived by software, except that the video coding control module is achieved by hardware. The experiment results show that it provides good video quality and has the real-time performance. This system can be applied into wide fields.
The twenty years since the first digital video camera was made commercially available has seen significant increases in the use of low-cost, amateur video productions for teaching and learning. In the same period, production and consumption of professionally produced video has also increased, as has the distribution platforms to access it.…
... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Video and multimedia products... Video and multimedia products. (a) All analog television displays 13 inches and larger, and computer... training and informational video and multimedia productions which support the agency's mission, regardless...
This bachelor thesis focusses on the determination of the brand awareness of product placement in video games. The theoretical part includes information about marketing, product placement and video games. The practical part consists of evaluation of the market research about product placements in video games. Conclusion suggests the most important factors influencing the level brand awareness.
Carlos Ernesto Gavilondo Rodriguez
Full Text Available The article presents the results of theoretical research on the production of scientific videos and its application to the teaching-learning process carried out in schools in the city of Guayaquil, Ecuador. It is located within the production line and Audiovisual Communication. Creation of scientific videos, from the Communication major with a concentration in audiovisual production and multimedia of the Salesian Polytechnic University. For the realization of the article it was necessary to use key terms that helped subsequently to data collection. used terms such as: audiovisual production, understood as the production of content for audiovisual media; the following term used audiovisual communication is recognized as the process in which there is an exchange of messages through an audible and / or visual system; and the last term we use is scientifically video, which is one that uses audiovisual resources to obtain relevant and reliable information.As part of the theoretical results a methodological proposal for the video production is presented for educational purposes. In conclusion set out, first, that from the communicative statement in recent times, current social relations, constitute a successful context of possibilities shown to education to generate meeting points between the world of the everyday and the knowledge. Another indicator validated as part of the investigation, is that teachers surveyed use the potential of the audiovisual media, and supported them, deploy alternatives for use.
Parrish, Russell V.; Busquets, Anthony M.; Hogge, Thomas W.
Video disk technology is one of the central themes of a technology demonstrator workstation being assembled as a man/machine interface for the Space Station Data Management Test Bed at Johnson Space Center. Langley Research Center personnel involved in the conception and implementation of this workstation have assembled a video production facility to allow production of video disk material for this propose. This paper documents the initial familiarization efforts in the field of video production for those personnel and that facility. Although the entire video disk production cycle was not operational for this initial effort, the production of a simulated disk on video tape did acquaint the personnel with the processes involved and with the operation of the hardware. Invaluable experience in storyboarding, script writing, audio and video recording, and audio and video editing was gained in the production process.
From the streets of London to subway stations in New York City, hundreds of thousands of surveillance cameras ubiquitously collect hundreds of thousands of videos, often running 24/7. How can such vast volumes of video data be stored, analyzed, indexed, and searched? How can advanced video analysis and systems autonomously recognize people and detect targeted activities real-time? Collating and presenting the latest information Intelligent Video Surveillance: Systems and Technology explores these issues, from fundamentals principle to algorithmic design and system implementation.An Integrated
Learning assessments are subject of discussions that envolve theoretical and practical approaches. To measure learning in physics by high school students, either qualitatively or quantitatively, is a process in which it should be possible to identify not only the concepts and contents students failed to achieve but also the reasons of the failure. We propose that students' video production offers a very effective formative assessment to teachers: as a formative assessment, it produces information that allows the understanding of where and when the learning process succeeded or failed, of identifying, as a subject or as a group, the defficiencies or misunderstandings related to the theme under analysis and their interpretation by students, and it provides also a different kind of assessment, related to some other life skills, like the ability to carry a project to its conclusion and to work cooperatively. In this paper, we describe the use of videos produced by high school students as an assessment resource. T...
Bardram, Jakob Eyvind; Bossen, Claus; Lykke-Olesen, Andreas
Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...
Bardram, Jakob; Bossen, Claus; Lykke-Olesen, Andreas
Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...
... From the Federal Register Online via the Government Publishing Office FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 76 Open Video Systems AGENCY: Federal Communications Commission. ACTION: Final rule... Open Video Systems. DATES: The amendments to 47 CFR 76.1505(d) and 76.1506(d), (l)(3), and (m)(2...
Robert C. Lorenz
Full Text Available Video games contain elaborate reinforcement and reward schedules that have the potential to maximize motivation. Neuroimaging studies suggest that video games might have an influence on the reward system. However, it is not clear whether reward-related properties represent a precondition, which biases an individual towards playing video games, or if these changes are the result of playing video games. Therefore, we conducted a longitudinal study to explore reward-related functional predictors in relation to video gaming experience as well as functional changes in the brain in response to video game training.Fifty healthy participants were randomly assigned to a video game training (TG or control group (CG. Before and after training/control period, functional magnetic resonance imaging (fMRI was conducted using a non-video game related reward task.At pretest, both groups showed strongest activation in ventral striatum (VS during reward anticipation. At posttest, the TG showed very similar VS activity compared to pretest. In the CG, the VS activity was significantly attenuated.This longitudinal study revealed that video game training may preserve reward responsiveness in the ventral striatum in a retest situation over time. We suggest that video games are able to keep striatal responses to reward flexible, a mechanism which might be of critical value for applications such as therapeutic cognitive training.
Lorenz, Robert C; Gleich, Tobias; Gallinat, Jürgen; Kühn, Simone
Video games contain elaborate reinforcement and reward schedules that have the potential to maximize motivation. Neuroimaging studies suggest that video games might have an influence on the reward system. However, it is not clear whether reward-related properties represent a precondition, which biases an individual toward playing video games, or if these changes are the result of playing video games. Therefore, we conducted a longitudinal study to explore reward-related functional predictors in relation to video gaming experience as well as functional changes in the brain in response to video game training. Fifty healthy participants were randomly assigned to a video game training (TG) or control group (CG). Before and after training/control period, functional magnetic resonance imaging (fMRI) was conducted using a non-video game related reward task. At pretest, both groups showed strongest activation in ventral striatum (VS) during reward anticipation. At posttest, the TG showed very similar VS activity compared to pretest. In the CG, the VS activity was significantly attenuated. This longitudinal study revealed that video game training may preserve reward responsiveness in the VS in a retest situation over time. We suggest that video games are able to keep striatal responses to reward flexible, a mechanism which might be of critical value for applications such as therapeutic cognitive training.
Byrnes, Patrick D.; Higgins, William E.
Image-guided bronchoscopy is a critical component in the treatment of lung cancer and other pulmonary disorders. During bronchoscopy, a high-resolution endobronchial video stream facilitates guidance through the lungs and allows for visual inspection of a patient's airway mucosal surfaces. Despite the detailed information it contains, little effort has been made to incorporate recorded video into the clinical workflow. Follow-up procedures often required in cancer assessment or asthma treatment could significantly benefit from effectively parsed and summarized video. Tracking diagnostic regions of interest (ROIs) could potentially better equip physicians to detect early airway-wall cancer or improve asthma treatments, such as bronchial thermoplasty. To address this need, we have developed a system for the postoperative analysis of recorded endobronchial video. The system first parses an input video stream into endoscopic shots, derives motion information, and selects salient representative key frames. Next, a semi-automatic method for CT-video registration creates data linkages between a CT-derived airway-tree model and the input video. These data linkages then enable the construction of a CT-video chest model comprised of a bronchoscopy path history (BPH) - defining all airway locations visited during a procedure - and texture-mapping information for rendering registered video frames onto the airwaytree model. A suite of analysis tools is included to visualize and manipulate the extracted data. Video browsing and retrieval is facilitated through a video table of contents (TOC) and a search query interface. The system provides a variety of operational modes and additional functionality, including the ability to define regions of interest. We demonstrate the potential of our system using two human case study examples.
Yiong Hwee Teo
Full Text Available In art, design and media education, learning from examples has been an established way to coach students. To derive greater benefits, teachers should get students to go beyond mere studying of examples. This paper focuses on engaging novice learners in collaborative critiquing of real examples of professional work and past student work in the context of producing an educational video project. While critiquing of such works is not new in art education, there is however scant literature on how to involve students in collaborative critiquing in an online environment involving video projects. A four-step critique model was therefore designed as procedural scaffolding and implemented in an online system, Knowledge Community. A group of Singapore pre-service teachers were engaged in online collaborative critiquing of videos before they embarked on their video projects to illustrate what constitutes good and bad video production. This research points to the value of online collaborative critiquing as a way to facilitate novice designers‟ progress towards expertise. In this environment learners are able to look at problems through multiple perspectives, generate their own solutions and build knowledge that uses the overlapping expertise of the online community.
The Seattle-King County Hazardous Waste Management Plan provides the framework for an intensive effort to keep Household Hazardous Waste (HHW) and Small Quantity Generator (SQG) wastes from entering the municipal solid and liquid waste streams. Many innovative programs for managing small sources of hazardous waste have been developed in response to the Plan. With the assistance of Urban Consortium grants, the City of Seattle has researched and developed a series of reports describing the planning, operation and evaluation of the plan`s HHW collection programs. Three of the Plan`s programs of particular interest to other jurisdictions are the fixed site and mobile HHW Collection Facilities, and the Business Waste Consultations provided to SQG`s. In 1991, Seattle received an Urban Consortium grant to produce two videos showing how the HHW Collection Facilities and Business Consultations programs work. This report provides an overviews of the video development and production process and a discussion of the lessons learned by the staff directing the production.
Fisher, Nina; Kaplan, Daniel; Egol, Kenneth A
Surgical video production is an important skill that can be of valuable use as an educational tool. However, it is important that surgical videos be filmed and edited in a methodological way to maximize its potential. In this video, we describe our preference for producing quality surgical videos. There are many important factors to consider during the filming process, including vantage point of the videographer, lighting, and visualization of instruments. During the editing process, certain techniques can be used to make the video more stimulating and thus more engaging to the viewer. This video presents the filming and editing of a single case. In addition, we provide examples of acceptable and poor footage and editing techniques. Surgical videos can be a valuable educational tool when properly executed. In this video, we describe techniques to ensure quality production.
Zhang, Zhengbing; Deng, Huiping; Xia, Zhenhua
Video systems have been widely used in many fields such as conferences, public security, military affairs and medical treatment. With the rapid development of FPGA, SOPC has been paid great attentions in the area of image and video processing in recent years. A network video transmission system based on SOPC is proposed in this paper for the purpose of video acquisition, video encoding and network transmission. The hardware platform utilized to design the system is an SOPC board of model Altera's DE2, which includes an FPGA chip of model EP2C35F672C6, an Ethernet controller and a video I/O interface. An IP core, known as Nios II embedded processor, is used as the CPU of the system. In addition, a hardware module for format conversion of video data, and another module to realize Motion-JPEG have been designed with Verilog HDL. These two modules are attached to the Nios II processor as peripheral equipments through the Avalon bus. Simulation results show that these two modules work as expected. Uclinux including TCP/IP protocol as well as the driver of Ethernet controller is chosen as the embedded operating system and an application program scheme is proposed.
Laptenok, V. D.; Seregin, Y. N.; Bocharov, A. N.; Murygin, A. V.; Tynchenko, V. S.
Equipment of video observation system for electron beam welding process was developed. Construction of video observation system allows to reduce negative effects on video camera during the process of electron beam welding and get qualitative images of this process.
Konstantas, Dimitri; Milanese, Ruggero; Jacot-Descombes, Alain; Pun, Thierry
The DVP project investigated the Quality of Service (QoS) requirements of broadcasters for several forms of distributed video production and run a series of trials of distributed virtual studios (studio on demand), distributed virtual reality, distributed musical rehearsals and distributed video editing and retrieval. The CUI of the University of Geneva participated in the DVP project in the distributed musical rehearsal (DR) and distributed video editing and retrieval (DVER) applications.
Mughal, Mudassar Ahmad; Zoric, Goranka; Juhlin, Oskar
We discuss synchronization problem in an emerging type of multimedia applications, called live mobile collaborative video production systems. The mobile character of the production system allows a director to be present at the site where he/she can see the event directly as well as through the mixer display. In such a situation production of a consistent broadcast is sensitive to delay and asynchrony of video streams in the mixer console. In this paper, we propose an algorithm for this situat...
Elliot, Diane L; Goldberg, Linn; Goldberg, Michael J
Videos are powerful tools for enhancing the reach and effectiveness of health promotion programs. They can be used for program promotion and recruitment, for training program implementation staff/volunteers, and as elements of an intervention. Although certain brief videos may be produced without technical assistance, others often require collaboration and contracting with professional videographers. To get practitioners started and to facilitate interactions with professional videographers, this Tool includes a guide to the jargon of video production and suggestions for how to integrate videos into health education and promotion work. For each type of video, production principles and issues to consider when working with a professional videographer are provided. The Tool also includes links to examples in each category of video applications to health promotion.
Kasprowicz, Grzegorz; Pastuszak, Grzegorz; Poźniak, Krzysztof; Trochimiuk, Maciej; Abramowski, Andrzej; Gaska, Michal; Bukowiecka, Danuta; Tyburska, Agata; Struniawski, Jarosław; Jastrzebski, Pawel; Jewartowski, Blazej; Frasunek, Przemysław; Nalbach-Moszynska, Małgorzata; Brawata, Sebastian; Bubak, Iwona; Gloza, Małgorzata
The purpose of the project is development of a platform which integrates video signals from many sources. The signals can be sourced by existing analogue CCTV surveillance installations, recent internet-protocol (IP) cameras or single cameras of any type. The system will consist of portable devices that provide conversion, encoding, transmission and archiving. The sharing subsystem will use distributed file system and also user console which provides simultaneous access to any of video streams in real time. The system is fully modular so its extension is possible, both from hardware and software side. Due to standard modular technology used, partial technology modernization is also possible during a long exploitation period.
Full Text Available Automated video object recognition is a topic of emerging importance in both defense and civilian applications. This work describes an accurate and low-power neuromorphic architecture and system for real-time automated video object recognition. Our system, Neuormorphic Visual Understanding of Scenes (NEOVUS, is inspired by recent findings in computational neuroscience on feed-forward object detection and classification pipelines for processing and extracting relevant information from visual data. The NEOVUS architecture is inspired by the ventral (what and dorsal (where streams of the mammalian visual pathway and combines retinal processing, form-based and motion-based object detection, and convolutional neural nets based object classification. Our system was evaluated by the Defense Advanced Research Projects Agency (DARPA under the NEOVISION2 program on a variety of urban area video datasets collected from both stationary and moving platforms. The datasets are challenging as they include a large number of targets in cluttered scenes with varying illumination and occlusion conditions. The NEOVUS system was also mapped to commercially available off-the-shelf hardware. The dynamic power requirement for the system that includes a 5.6Mpixel retinal camera processed by object detection and classification algorithms at 30 frames per second was measured at 21.7 Watts (W, for an effective energy consumption of 5.4 nanoJoules (nJ per bit of incoming video. In a systematic evaluation of five different teams by DARPA on three aerial datasets, the NEOVUS demonstrated the best performance with the highest recognition accuracy and at least three orders of magnitude lower energy consumption than two independent state of the art computer vision systems. These unprecedented results show that the NEOVUS has the potential to revolutionize automated video object recognition towards enabling practical low-power and mobile video processing applications.
Xia, Jiali; Jin, Jesse S.
Video-On-Demand is a new development on the Internet. In order to manage the rich multimedia information and the large number of users, we present an Internet Video-On-Demand system with some E- Commerce flavors. This paper presents the system architecture and technologies required in the implementation. It provides interactive Video-On-Demand services in which the user has a complete control over the session presentation. It allows the user to select and receive specific video information by retrieving the database. For improving the performance of video information retrieval and management, the video information is represented by hierarchical video metadata in XML format. Video metadatabase stored the video information in this hierarchical structure and allows user to search the video shots at different semantic levels in the database. To browse the searched video, the user not only has full-function VCR capabilities as the traditional Video-On-Demand, but also can browse the video in a hierarchical method to view different shots. In order to perform management of large number of users over the Internet, a membership database designed and managed in an E-Commerce environment, which allows the user to access the video database based on different access levels.
Hammond Wagner, C. R.; McDavid, L. A.; Virginia, R. A.
Dartmouth's NSF-supported IGERT Polar Environmental Change graduate program has focused on using video media to foster interdisciplinary thinking and to improve student skills in science communication and public outreach. Researchers, educators, and funding organizations alike recognize the value of video media for making research results more accessible and relevant to diverse audiences and across cultures. We present an affordable equipment set and the basic video training needed as well as available Dartmouth institutional support systems for students to produce outreach videos on climate change and its associated impacts on people. We highlight and discuss the successes and challenges of producing three types of video products created by graduate and undergraduate students affiliated with the Dartmouth IGERT. The video projects created include 1) graduate student profile videos, 2) a series of short student-created educational videos for Greenlandic high school students, and 3) an outreach video about women in science based on the experiences of women students conducting research during the IGERT field seminar at Summit Station and Kangerlussuaq, Greenland. The 'Science in Greenland--It's a Girl Thing' video was featured on The New York Times Dot Earth blog and the Huffington Post Green blog among others and received international recognition. While producing these videos, students 1) identified an audience and created story lines, 2) worked in front of and behind the camera, 3) utilized low-cost digital editing applications, and 4) shared the videos on multiple platforms from social media to live presentations. The three video projects were designed to reach different audiences, and presented unique challenges for content presentation and dissemination. Based on student and faculty assessment, we conclude that the video projects improved student science communication skills and increased public knowledge of polar science and the effects of climate change.
Д В Сенашенко
Full Text Available The article describes distant learning systems used in world practice. The author gives classification of video communication systems. Aspects of using Skype software in Russian Federation are discussed. In conclusion the author provides the review of modern production video conference systems used as tools for distant learning.
Spector, B.; Eilbert, L.; Finando, S.; Fukuda, F.
A Video Integrated Measurement (VIM) System is described which incorporates the use of various noninvasive diagnostic procedures (moire contourography, electromyography, posturometry, infrared thermography, etc.), used individually or in combination, for the evaluation of neuromusculoskeletal and other disorders and their management with biofeedback and other therapeutic procedures. The system provides for measuring individual diagnostic and therapeutic modes, or multiple modes by split screen superimposition, of real time (actual) images of the patient and idealized (ideal-normal) models on a video monitor, along with analog and digital data, graphics, color, and other transduced symbolic information. It is concluded that this system provides an innovative and efficient method by which the therapist and patient can interact in biofeedback training/learning processes and holds considerable promise for more effective measurement and treatment of a wide variety of physical and behavioral disorders.
Gershkoff, I.; Haspert, J. K.; Morgenstern, B.
A cost model that can be used to systematically identify the costs of procuring and operating satellite linked communications systems is described. The user defines a network configuration by specifying the location of each participating site, the interconnection requirements, and the transmission paths available for the uplink (studio to satellite), downlink (satellite to audience), and voice talkback (between audience and studio) segments of the network. The model uses this information to calculate the least expensive signal distribution path for each participating site. Cost estimates are broken downy by capital, installation, lease, operations and maintenance. The design of the model permits flexibility in specifying network and cost structure.
Li, Xiangzhen; Xie, Xiaodan; Yin, Xiaoqiang
In the information age, the rapid development in the direction of intelligent video processing, complex algorithm proposed the powerful challenge on the performance of the processor. In this article, through the FPGA + TMS320C6678 frame structure, the image to fog, merge into an organic whole, to stabilize the image enhancement, its good real-time, superior performance, break through the traditional function of video processing system is simple, the product defects such as single, solved the video application in security monitoring, video, etc. Can give full play to the video monitoring effectiveness, improve enterprise economic benefits.
..., ``Nintendo''). The products accused of infringing the asserted patents are gaming systems and related... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Video Game Systems and Wireless Controllers and Components Thereof; Commission...
Full Text Available This is the first in Athabasca University’s series of evaluation reports to feature online Webcam and videoconferencing products. While Webcam software generates a simple visual presentation from a live online camera, videoconferencing products contain a wider range of interactive features serving multi-point interactions between participants. In many online situations, the addition of video images to a live presentation can add substantially to its educational effectiveness. Ten products/ online services are reviewed, supporting a wide range of video-based activities.
Petkovic, M.; Jonker, Willem
An increasing number of large publicly available video libraries results in a demand for techniques that can manipulate the video data based on content. In this paper, we present a content-based video retrieval system called Cobra. The system supports automatic extraction and retrieval of high-level
Wang, Regina W Y; Chang, Yu-Ching; Chuang, Shang-Wen
Neuromarketing has become popular and received a lot of attention. The quality of video commercials and the product information they convey to consumers is a hotly debated topic among advertising agencies and product advertisers. This study explored the impact of advertising narrative and the frequency of branding product exposures on the preference for the commercial and the branding product. We performed electroencephalography (EEG) experiments on 30 subjects while they watched video commercials. The behavioral data indicated that commercials with a structured narrative and containing multiple exposures of the branding products had a positive impact on the preference for the commercial and the branding product. The EEG spectral dynamics showed that the narratives of video commercials resulted in higher theta power of the left frontal, bilateral occipital region, and higher gamma power of the limbic system. The narratives also induced significant cognitive integration-related beta and gamma power of the bilateral temporal regions and the parietal region. It is worth noting that the video commercials with a single exposure of the branding products would be indicators of attention. These new findings suggest that the presence of a narrative structure in video commercials has a critical impact on the preference for branding products.
Smithwick, Erica; Baxter, Emily; Kim, Kyung; Edel-Malizia, Stephanie; Rocco, Stevie; Blackstock, Dean
Two forms of interactive video were assessed in an online course focused on conservation. The hypothesis was that interactive video enhances student perceptions about learning and improves mental models of social-ecological systems. Results showed that students reported greater learning and attitudes toward the subject following interactive video.…
... COMMISSION Certain Video Displays and Products Using and Containing Same Institution of Investigation... importation of certain video displays and products using and containing same by reason of infringement of... after importation of certain video displays and products using and containing same ] that infringe one...
Video Streaming is nowadays the Internet’s biggest source of consumer traffic. Traditional content providers rely on centralised client-server model for distributing their video streaming content. The current generation is moving from being passive viewers, or content consumers, to active content
Full Text Available This paper describes a simplified 2D to 3D Video Conversion Technology, taking virtual campus 3D video production as an example. First, it clarifies the meaning of the 2D to 3D Video Conversion Technology, and points out the disadvantages of traditional methods. Second, it forms an innovative and convenient method. A flow diagram, software and hardware configurations are presented. Finally, detailed description of the conversion steps and precautions are given in turn to the three processes, namely, preparing materials, modeling objects and baking landscapes, recording screen and converting videos .
Park, Eunhee; Kulbok, Pamela A; Keim-Malpass, Jessica; Drake, Emily; Kennedy, Michael J
This study tested whether a youth participatory video production program for smoking prevention is feasible and effective. A participatory video production program was implemented in eight twice-weekly sessions at a youth summer camp in a community center in a low-income neighborhood. Twenty-three youths participated. Descriptive statistics and a qualitative analysis were conducted to test the feasibility of the program by assessing attendance rates, the time and resources required, reasons for participation, and program satisfaction using checklists and interviews. Smoking intention was measured via pre- and post-intervention surveys and a quantitative analysis utilizing a Wilcoxon Signed Rank test to detect differences in intention for non-smoking. Participants worked in groups to produce four video clips containing anti-smoking messages. Three main themes (active engagement, participation for community health, and personal growth and healthy development) emerged from the qualitative interview data. >75% of the participants considered the program excellent and stated that it met their expectations. Significant positive changes were also found from baseline to post-intervention in intention not to smoke. This study demonstrated the effect of a participatory digital media production approach and confirmed its feasibility for youth health promotion and health education. Participants' active involvement in producing anti-smoking videos for a community health-promotion campaign decreased their intention to smoke and empowered them as advocates for a non-smoking community. These findings confirm the feasibility and utility of digital media use and interactive technology for actively engaging young people in health promotion. Copyright © 2017 Elsevier Inc. All rights reserved.
Bescos, Jesus; Martinez, Jose M.; Cabrera, Julian M.; Cisneros, Guillermo
This paper describes the first stages of a research project that is currently being developed in the Image Processing Group of the UPM. The aim of this effort is to add video capabilities to the Storage and Retrieval Information System already working at our premises. Here we will focus on the early design steps of a Video Information System. For this purpose, we present a review of most of the reported techniques for video temporal segmentation and semantic segmentation, previous steps to afford the content extraction task, and we discuss them to select the more suitable ones. We then outline a block design of a temporal segmentation module, and present guidelines to the design of the semantic segmentation one. All these operations trend to facilitate automation in the extraction of low level features and semantic features that will finally take part of the video descriptors.
Norman, Marie K
The use of instructional video is increasing across all disciplines and levels of education. Although video has a number of distinct advantages for course delivery and student learning, it can also be time-consuming and resource-intensive to produce, which imposes a burden on busy faculty. With video poised to play a larger role in medical education, we need strategies for streamlining video production and ensuring that the video we produce is of lasting value. This article draws on learning research and best practices in educational technology, along with the author's experience in online education and video production. It offers 12 practical tips for reducing the initial time investment in video production and creating video that can be reused long into the future. These tips can help faculty and departments create high-quality instructional video while using their time and resources more wisely.
Zhao, Heng; Wang, Xiang-jun
This paper presents a FPGA based video interface conversion system that enables the inter-conversion between digital and analog video. Cyclone IV series EP4CE22F17C chip from Altera Corporation is used as the main video processing chip, and single-chip is used as the information interaction control unit between FPGA and PC. The system is able to encode/decode messages from the PC. Technologies including video decoding/encoding circuits, bus communication protocol, data stream de-interleaving and de-interlacing, color space conversion and the Camera Link timing generator module of FPGA are introduced. The system converts Composite Video Broadcast Signal (CVBS) from the CCD camera into Low Voltage Differential Signaling (LVDS), which will be collected by the video processing unit with Camera Link interface. The processed video signals will then be inputted to system output board and displayed on the monitor.The current experiment shows that it can achieve high-quality video conversion with minimum board size.
Describes benefits of integrating video production into high school curricula. Hardware requirements are suggested, including a camcorder, video cassette recorder, computer, software, converter, character generator, and editing machine; and typical video production projects are described, including a yearbook, documentaries, tutorials, music…
Full Text Available In order to support high-definition video transmission, an implementation of video transmission system based on Long Term Evolution is designed. This system is developed on Xilinx Virtex-6 FPGA ML605 Evaluation Board. The paper elaborates the features of baseband link designed in Xilinx ISE and protocol stack designed in Xilinx SDK, and introduces the process of setting up hardware and software platform in Xilinx XPS. According to test, this system consumes less hardware resource and is able to transmit bidirectional video clearly and stably.
Abstract: To day, more and more products are customized. Trends are not only to sell a product to the customer, but to sell a product system. The system can either be a combination of physical products or physical products together with some kind of service. Customers get in this way not a product...... but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...... the decoupling point has a central role. The scope for this article is therefore to analyse the possibilities for using modularisation in designing and controlling a production system. How will the development of modularised product systems influence the production system? In the paper, a case will be used...
Botella, Guillermo; García, Carlos; Meyer-Bäse, Uwe
This contribution focuses on different topics covered by the special issue titled `Hardware Implementation of Machine vision Systems' including FPGAs, GPUS, embedded systems, multicore implementations for image analysis such as edge detection, segmentation, pattern recognition and object recognition/interpretation, image enhancement/restoration, image/video compression, image similarity and retrieval, satellite image processing, medical image processing, motion estimation, neuromorphic and bioinspired vision systems, video processing, image formation and physics based vision, 3D processing/coding, scene understanding, and multimedia.
Berger, Russ; Schrag, Richard C.; Ridings, Jason J.
The new NFL Films 200,000 sq. ft. headquarters is home for the critically acclaimed film production that preserves the NFL's visual legacy week-to-week during the football season, and is also the technical plant that processes and archives football footage from the earliest recorded media to the current network broadcasts. No other company in the country shoots more film than NFL Films, and the inclusion of cutting-edge video and audio formats demands that their technical spaces continually integrate the latest in the ever-changing world of technology. This facility houses a staggering array of acoustically sensitive spaces where music and sound are equal partners with the visual medium. Over 90,000 sq. ft. of sound critical technical space is comprised of an array of sound stages, music scoring stages, audio control rooms, music writing rooms, recording studios, mixing theaters, video production control rooms, editing suites, and a screening theater. Every production control space in the building is designed to monitor and produce multi channel surround sound audio. An overview of the architectural and acoustical design challenges encountered for each sophisticated listening, recording, viewing, editing, and sound critical environment will be discussed.
Scollato, A; Perrini, P; Benedetto, N; Di Lorenzo, N
We propose an easy-to-construct digital video editing system ideal to produce video documentation and still images. A digital video editing system applicable to many video sources in the operating room is described in detail. The proposed system has proved easy to use and permits one to obtain videography quickly and easily. Mixing different streams of video input from all the devices in use in the operating room, the application of filters and effects produces a final, professional end-product. Recording on a DVD provides an inexpensive, portable and easy-to-use medium to store or re-edit or tape at a later time. From stored videography it is easy to extract high-quality, still images useful for teaching, presentations and publications. In conclusion digital videography and still photography can easily be recorded by the proposed system, producing high-quality video recording. The use of firewire ports provides good compatibility with next-generation hardware and software. The high standard of quality makes the proposed system one of the lowest priced products available today.
van der Schaar-Mitrea, Mihaela; de With, Peter H. N.
The diversity in TV images has augmented with the increased application of computer graphics. In this paper we study z coding system that supports both the lossless coding of such graphics data and regular lossy video compression. The lossless coding techniques are based on runlength and arithmetical coding. For video compression, we introduce a simple block predictive coding technique featuring individual pixel access, so that it enables a gradual shift from lossless coding of graphics to the lossy coding of video. An overall bit rate control completes the system. Computer simulations show a very high quality with a compression factor between 2-3.
The objective of this activity was to record video that could be used for controlled : evaluation of video image vehicle detection system (VIVDS) products and software upgrades to : existing products based on a list of conditions that might be diffic...
Full Text Available Most universities are already implementing wired and wireless network that is used to access integrated information systems and the Internet. At present it is important to do research on the influence of the broadcasting system through the access point for video transmitter learning in the university area. At every university computer network through the access point must also use the cable in its implementation. These networks require cables that will connect and transmit data from one computer to another computer. While wireless networks of computers connected through radio waves. This research will be a test or assessment of how the influence of the network using the WLAN access point for video broadcasting means learning from the server to the client. Instructional video broadcasting from the server to the client via the access point will be used for video broadcasting means of learning. This study aims to understand how to build a wireless network by using an access point. It also builds a computer server as instructional videos supporting software that can be used for video server that will be emitted by broadcasting via the access point and establish a system of transmitting video from the server to the client via the access point.
Mohamed M. Fouad
Full Text Available In this paper, we present a modified inter-view prediction Multiview Video Coding (MVC scheme from the perspective of viewer's interactivity. When a viewer requests some view(s, our scheme leads to lower transmission bit-rate. We develop an interactive multiview video streaming system exploiting that modified MVC scheme. Conventional interactive multiview video systems require high bandwidth due to redundant data being transferred. With real data test sequences, clear improvements are shown using the proposed interactive multiview video system compared to competing ones in terms of the average transmission bit-rate and storage size of the decoded (i.e., transferred data with comparable rate-distortion.
M. van Persie
Full Text Available During a fire incident live airborne video offers the fire brigade an additional means of information. Essential for the effective usage of the daylight and infra red video data from the UAS is that the information is fully integrated into the crisis management system of the fire brigade. This is a GIS based system in which all relevant geospatial information is brought together and automatically distributed to all levels of the organisation. In the context of the Dutch Fire-Fly project a geospatial video server was integrated with a UAS and the fire brigades crisis management system, so that real-time geospatial airborne video and derived products can be made available at all levels during a fire incident. The most important elements of the system are the Delftdynamics Robot Helicopter, the Video Multiplexing System, the Keystone geospatial video server/editor and the Eagle and CCS-M crisis management systems. In discussion with the Security Region North East Gelderland user requirements and a concept of operation were defined, demonstrated and evaluated. This article describes the technical and operational approach and results.
... shall be “Open Video System Notice of Intent” and “Attention: Media Bureau.” This wording shall be... Notice of Intent with the Office of the Secretary and the Bureau Chief, Media Bureau. The Notice of... capacity through a fair, open and non-discriminatory process; the process must be insulated from any bias...
Full Text Available A novel video conference system is developed. Suppose that three people A, B, and C attend the video conference, the proposed system enables eye contact among every pair. Furthermore, when B and C chat, A feels as if B and C were facing each other (eye contact seems to be kept among B and C. In the case of a triangle video conference, the respective video system is composed of a half mirror, two video cameras, and two monitors. Each participant watches other participants' images that are reflected by the half mirror. Cameras are set behind the half mirror. Since participants' image (face and the camera position are adjusted to be the same direction, eye contact is kept and conversation becomes very natural compared with conventional video conference systems where participants' eyes do not point to the other participant. When 3 participants sit at the vertex of an equilateral triangle, eyes can be kept even for the situation mentioned above (eye contact between B and C from the aspect of A. Eye contact can be kept not only for 2 or 3 participants but also any number of participants as far as they sit at the vertex of a regular polygon.
Full Text Available This paper reports on the development of an automated embedded video surveillance system using two customized embedded RISC processors. The application is partitioned into object tracking and video stream encoding subsystems. The real-time object tracker is able to detect and track moving objects by video images of scenes taken by stationary cameras. It is based on the block-matching algorithm. The video stream encoding involves the optimization of an international telecommunications union (ITU-T H.263 baseline video encoder for quarter common intermediate format (QCIF and common intermediate format (CIF resolution images. The two subsystems running on two processor cores were integrated and a simple protocol was added to realize the automated video surveillance system. The experimental results show that the system is capable of detecting, tracking, and encoding QCIF and CIF resolution images with object movements in them in real-time. With low cycle-count, low-transistor count, and low-power consumption requirements, the system is ideal for deployment in remote locations.
Giroire, Frédéric; Huin, Nicolas
International audience; —We study distributed systems for live video streaming. These systems can be of two types: structured and un-structured. In an unstructured system, the diffusion is done opportunistically. The advantage is that it handles churn, that is the arrival and departure of users, which is very high in live streaming systems, in a smooth way. On the opposite, in a structured system, the diffusion of the video is done using explicit diffusion trees. The advantage is that the dif...
Al-Hamad, A.; Moussa, A.; El-Sheimy, N.
The last two decades have witnessed a huge growth in the demand for geo-spatial data. This demand has encouraged researchers around the world to develop new algorithms and design new mapping systems in order to obtain reliable sources for geo-spatial data. Mobile Mapping Systems (MMS) are one of the main sources for mapping and Geographic Information Systems (GIS) data. MMS integrate various remote sensing sensors, such as cameras and LiDAR, along with navigation sensors to provide the 3D coordinates of points of interest from moving platform (e.g. cars, air planes, etc.). Although MMS can provide accurate mapping solution for different GIS applications, the cost of these systems is not affordable for many users and only large scale companies and institutions can benefits from MMS systems. The main objective of this paper is to propose a new low cost MMS with reasonable accuracy using the available sensors in smartphones and its video camera. Using the smartphone video camera, instead of capturing individual images, makes the system easier to be used by non-professional users since the system will automatically extract the highly overlapping frames out of the video without the user intervention. Results of the proposed system are presented which demonstrate the effect of the number of the used images in mapping solution. In addition, the accuracy of the mapping results obtained from capturing a video is compared to the same results obtained from using separate captured images instead of video.
Craciunescu, Razvan; Mihovska, Albena Dimitrova; Kyriazakos, Sofoklis
Gesture recognition is a topic in computer science and language technology with the goal of interpreting human gestures via mathematical algorithms. Gestures can originate from any bodily motion or state but commonly originate from the face or hand. Current research focus includes on the emotion...... recognition from the face and hand gesture recognition. Gesture recognition enables humans to communicate with the machine and interact naturally without any mechanical devices. This paper investigates the possibility to use non-audio/video sensors in order to design a low-cost gesture recognition device...
Su, Ang; Zhang, Yueqiang; Dong, Jing; Xu, Yuhua; Zhu, Xianwei; Zhang, Xiaohu
The high portability of small Unmanned Aircraft Vehicles (UAVs) makes them play an important role in surveillance and reconnaissance tasks, so the military and civilian desires for UAVs are constantly growing. Recently, we have developed a real-time video exploitation system for our small UAV which is mainly used in forest patrol tasks. Our system consists of six key models, including image contrast enhancement, video stabilization, mosaicing, salient target indication, moving target indication, and display of the footprint and flight path on map. Extensive testing on the system has been implemented and the result shows our system performed well.
Full Text Available The recent development of three dimensional (3D display technologies has resulted in a proliferation of 3D video production and broadcasting, attracting a lot of research into capture, compression and delivery of stereoscopic content. However, the predominant design practice of interactions with 3D video content has failed to address its differences and possibilities in comparison to the existing 2D video interactions. This paper presents a study of user requirements related to interaction with the stereoscopic 3D video. The study suggests that the change of view, zoom in/out, dynamic video browsing, and textual information are the most relevant interactions with stereoscopic 3D video. In addition, we identified a strong demand for object selection that resulted in a follow-up study of user preferences in 3D selection using virtual-hand and ray-casting metaphors. These results indicate that interaction modality affects users’ decision of object selection in terms of chosen location in 3D, while user attitudes do not have significant impact. Furthermore, the ray-casting-based interaction modality using Wiimote can outperform the volume-based interaction modality using mouse and keyboard for object positioning accuracy.
Kapustin, A. A.; Razumovskii, V. N.; Iatsevich, G. B.
A spatial-spectral analysis method is considered for a laser scanning video system with the phase processing of a received signal, on a modulation frequency. Distortions caused by the system are analyzed, and a general problem is reduced for the case of a cylindrical surface. The approach suggested can also be used for scanning microwave systems.
... system operator may charge different rates to different classes of video programming providers, provided... open video systems. 76.1504 Section 76.1504 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Open Video Systems § 76...
Song, Joongseok; Kim, Changseob; Park, Hanhoon; Park, Jong-Il
We propose a practical system that can effectively mix the depth data of real and virtual objects by using a Z buffer and can quickly generate digital mixed reality video holograms by using multiple graphic processing units (GPUs). In an experiment, we verify that real objects and virtual objects can be merged naturally in free viewing angles, and the occlusion problem is well handled. Furthermore, we demonstrate that the proposed system can generate mixed reality video holograms at 7.6 frames per second. Finally, the system performance is objectively verified by users' subjective evaluations.
Chen, Chien-Hsu; Chou, Yin-Ju
This study focuses on development of augmented video system on traditional picture postcards. The system will provide users to print out the augmented reality marker on the sticker to stick on the picture postcard, and it also allows users to record their real time image and video to augment on that stick marker. According dynamic image, users can share travel moods, greeting, and travel experience to their friends. Without changing in the traditional picture postcards, we develop augmented video system on them by augmented reality (AR) technology. It not only keeps the functions of traditional picture postcards, but also enhances user's experience to keep the user's memories and emotional expression by augmented digital media information on them.
Full Text Available Future wireless video transmission systems will consider orthogonal frequency division multiplexing (OFDM as the basic modulation technique due to its robustness and low complexity implementation in the presence of frequency-selective channels. Recently, adaptive bit loading techniques have been applied to OFDM showing good performance gains in cable transmission systems. In this paper a multilayer bit loading technique, based on the so called Ã‚Â“ordered subcarrier selection algorithm,Ã‚Â” is proposed and applied to a Hiperlan2-like wireless system at 5 GHz for efficient layered multimedia transmission. Different schemes realizing unequal error protection both at coding and modulation levels are compared. The strong impact of this technique in terms of video quality is evaluated for MPEG-4 video transmission.
Media literacy educators talk about the importance of developing essential social skills, such as collaboration, by using video production in the classroom. Video production with disadvantaged youth can also play a role of art therapy, as students use their creativity to come to terms with traumatizing pasts. This paper offers an account of a…
... COMMISSION Certain Video Displays, Components Thereof, and Products Containing Same; Notice of Commission... importation of certain video displays, components thereof, or products containing same that infringe one or... Matter of Certain Devices for Connecting Computers via Telephone Lines, Inv. No. 337-TA-360, USITC Pub...
Rothkrantz, L.; Lefter, I.
The paper describes a surveillance system of cameras installed at lamppost of a military area. The surveillance system has been designed to detect unwanted visitors or suspicious behaviors. The area is composed of streets, building blocks and surrounded by gates and water. The video recordings are
Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...
Ecliptic Enterprises Corporation, headquartered in Pasadena, California, provided onboard video systems for rocket and space shuttle launches before it was tasked by Ames Research Center to craft the Data Handling Unit that would control sensor instruments onboard the Lunar Crater Observation and Sensing Satellite (LCROSS) spacecraft. The technological capabilities the company acquired on this project, as well as those gained developing a high-speed video system for monitoring the parachute deployments for the Orion Pad Abort Test Program at Dryden Flight Research Center, have enabled the company to offer high-speed and high-definition video for geosynchronous satellites and commercial space missions, providing remarkable footage that both informs engineers and inspires the imagination of the general public.
Yang, Fan; Ma, Chunting; Li, Haoyi
The design of a wireless video transmission system based on STM32, the system uses the STM32F103VET6 microprocessor as the core, through the video acquisition module collects video data, video data will be sent to the receiver through the wireless transmitting module, receiving data will be displayed on the LCD screen. The software design process of receiver and transmitter is introduced. The experiment proves that the system realizes wireless video transmission function.
Jones, D. P.; Shirey, D. L.; Amai, W. A.
This paper presents a high bandwidth fiber-optic communication system intended for post accident recovery of weapons. The system provides bi-directional multichannel, and multi-media communications. Two smaller systems that were developed as direct spin-offs of the larger system are also briefly discussed.
Jones, D.P.; Shirey, D.L.; Amai, W.A.
This paper presents a high bandwidth fiber-optic communication system intended for post accident recovery of weapons. The system provides bi-directional multichannel, and multi-media communications. Two smaller systems that were developed as direct spin-offs of the larger system are also briefly discussed.
Gramss, Denise; Struve, Doreen
The study reported in this paper investigated the usefulness of different instructions for guiding inexperienced older adults through interactive systems. It was designed to compare different media in relation to their social as well as their motivational impact on the elderly during the learning process. Precisely, the video was compared with…
Glazkov, V. D.; Goretov, Iu. M.; Rozhavskii, E. I.; Shcherbakov, V. V.
The self-correcting video section of the satellite-borne Fragment multispectral scanning system is described. This section scheme makes possible a sufficiently efficient equalization of the transformation coefficients of all the measuring sections in the presence of a reference-radiation source and a single reference time interval for all the sections.
Full Text Available In this work we introduce a simple client-server system architecture and algorithms for ubiquitous live video and VOD service support. The main features of the system are: efficient usage of network resources, emphasis on user personalization, and ease of implementation. The system supports many continuous service requirements such as QoS provision, user mobility between networks and between different communication devices, and simultaneous usage of a device by a number of users.
Full Text Available An object-based video authentication system, which combines watermarking, error correction coding (ECC, and digital signature techniques, is presented for protecting the authenticity between video objects and their associated backgrounds. In this system, a set of angular radial transformation (ART coefficients is selected as the feature to represent the video object and the background, respectively. ECC and cryptographic hashing are applied to those selected coefficients to generate the robust authentication watermark. This content-based, semifragile watermark is then embedded into the objects frame by frame before MPEG4 coding. In watermark embedding and extraction, groups of discrete Fourier transform (DFT coefficients are randomly selected, and their energy relationships are employed to hide and extract the watermark. The experimental results demonstrate that our system is robust to MPEG4 compression, object segmentation errors, and some common object-based video processing such as object translation, rotation, and scaling while securely preventing malicious object modifications. The proposed solution can be further incorporated into public key infrastructure (PKI.
Du, Bangshi; Qi, Feng; Shao, Sujie; Wang, Ying; Li, Weijian
Video conference system has become an important support platform for smart grid operation and management, its operation quality is gradually concerning grid enterprise. First, the evaluation indicator system covering network, business and operation maintenance aspects was established on basis of video conference system's operation statistics. Then, the operation quality assessment model combining genetic algorithm with regularized BP neural network was proposed, which outputs operation quality level of the system within a time period and provides company manager with some optimization advice. The simulation results show that the proposed evaluation model offers the advantages of fast convergence and high prediction accuracy in contrast with regularized BP neural network, and its generalization ability is superior to LM-BP neural network and Bayesian BP neural network.
Kong, Hyoun-Joong; Seo, Jong Mo; Hwang, Jeong Min; Kim, Hee Chan
Binocular indirect ophthalmoscope (BIO) provides a wider view of fundus with stereopsis contrary to the direct one. Proposed system is composed of portable BIO and 3D viewing unit. The illumination unit of BIO utilized high flux LED as a light source, LED condensing lens cap for beam focusing, color filters and small lithium ion battery. In optics unit of BIO, beam splitter was used to distribute an examinee's fundus image both to examiner's eye and to CMOS camera module attached to device. Captured retinal video stream data from stereo camera modules were sent to PC through USB 2.0 connectivity. For 3D viewing, two video streams having parallax between them were aligned vertically and horizontally and made into side-by-side video stream for cross-eyed stereoscopy. And the data were converted into autostereoscopic video stream using vertical interlacing for stereoscopic LCD which has glass 3D filter attached to the front side of it. Our newly devised system presented the real-time 3-D view of fundus to assistants with less dizziness than cross-eyed stereoscopy. And the BIO showed good performance compared to conventional portable BIO (Spectra Plus, Keeler Limited, Windsor, UK).
Chow, John W.; Carlton, Les G.; Ekkekakis, Panteleimon; Hay, James G.
Discusses advantages of a video-based, digitized image system for the study and analysis of projectile motion in the physics laboratory. Describes the implementation of a web-based digitized video system. (WRM)
... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Investigations: Terminations, Modifications and Rulings: Certain Video Game Systems and... United States after importation of certain video game systems and controllers by reason of infringement...
Mikulec, Martin; Voznak, Miroslav; Safarik, Jakub; Partila, Pavol; Rozhon, Jan; Mehic, Miralem
The paper deals with presentation of the IVAS system within the 7FP EU INDECT project. The INDECT project aims at developing the tools for enhancing the security of citizens and protecting the confidentiality of recorded and stored information. It is a part of the Seventh Framework Programme of European Union. We participate in INDECT portal and the Interactive Video Audio System (IVAS). This IVAS system provides a communication gateway between police officers working in dispatching centre and police officers in terrain. The officers in dispatching centre have capabilities to obtain information about all online police officers in terrain, they can command officers in terrain via text messages, voice or video calls and they are able to manage multimedia files from CCTV cameras or other sources, which can be interesting for officers in terrain. The police officers in terrain are equipped by smartphones or tablets. Besides common communication, they can reach pictures or videos sent by commander in office and they can respond to the command via text or multimedia messages taken by their devices. Our IVAS system is unique because we are developing it according to the special requirements from the Police of the Czech Republic. The IVAS communication system is designed to use modern Voice over Internet Protocol (VoIP) services. The whole solution is based on open source software including linux and android operating systems. The technical details of our solution are presented in the paper.
A HTTP based video transmission system has been built upon the p2p(peer to peer) network structure utilizing the Java technologies. This makes the video monitoring available to any host which has been connected to the World Wide Web in any method, including those hosts behind firewalls or in isolated sub-networking. In order to achieve this, a video source peer has been developed, together with the client video playback peer. The video source peer can respond to the video stream request in HTTP protocol. HTTP based pipe communication model is developed to speeding the transmission of video stream data, which has been encoded into fragments using the JPEG codec. To make the system feasible in conveying video streams between arbitrary peers on the web, a HTTP protocol based relay peer is implemented as well. This video monitoring system has been applied in a tele-robotic system as a visual feedback to the operator.
Shi, Yu; Yan, Guozheng; Zhu, Bingquan; Liu, Gang
Wireless power transmission (WPT) technology can solve the energy shortage problem of the video capsule endoscope (VCE) powered by button batteries, but the fixed platform limited its clinical application. This paper presents a portable WPT system for VCE. Besides portability, power transfer efficiency and stability are considered as the main indexes of optimization design of the system, which consists of the transmitting coil structure, portable control box, operating frequency, magnetic core and winding of receiving coil. Upon the above principles, the correlation parameters are measured, compared and chosen. Finally, through experiments on the platform, the methods are tested and evaluated. In the gastrointestinal tract of small pig, the VCE is supplied with sufficient energy by the WPT system, and the energy conversion efficiency is 2.8%. The video obtained is clear with a resolution of 320×240 and a frame rate of 30 frames per second. The experiments verify the feasibility of design scheme, and further improvement direction is discussed.
... COMMISSION In the Matter of: Certain Video Game Systems and Controllers; Notice of Investigation AGENCY: U.S... importation, and the sale within the United States after importation of certain video game systems and... after importation of certain video game systems and controllers that infringe one or more of claims 16...
Full Text Available Despite the dominant view that distinguishes video game space from other spatial representations as navigable space, someone who engages with the screen space of a video game must first and foremost rest at an ideal viewing spot in physical space, which is in accord with the requirements of a proper screening. In other words, one’s illusory experience of navigable space becomes possible only if one’s body in physical space occupies the visual center on which the scenographic arrangement relies in order to function.
Cormier, Etienne; Cao, Frédéric; Guichard, Frédéric; Viard, Clément
This article presents a system and a protocol to characterize image stabilization systems both for still images and videos. It uses a six axes platform, three being used for camera rotation and three for camera positioning. The platform is programmable and can reproduce complex motions that have been typically recorded by a gyroscope mounted on different types of cameras in different use cases. The measurement uses a single chart for still image and videos, the texture dead leaves chart. Although the proposed implementation of the protocol uses a motion platform, the measurement itself does not rely on any specific hardware. For still images, a modulation transfer function is measured in different directions and is weighted by a contrast sensitivity function (simulating the human visual system accuracy) to obtain an acutance. The sharpness improvement due to the image stabilization system is a good measurement of performance as recommended by a CIPA standard draft. For video, four markers on the chart are detected with sub-pixel accuracy to determine a homographic deformation between the current frame and a reference position. This model describes well the apparent global motion as translations, but also rotations along the optical axis and distortion due to the electronic rolling shutter equipping most CMOS sensors. The protocol is applied to all types of cameras such as DSC, DSLR and smartphones.
Sun, Jun; Liang, Mingxing; Chen, Weijun; Zhang, Bin
In order to reinforce the measure of vegetable shed's safety, the S3C44B0X is taken as the main processor chip. The embedded hardware platform is built with a few outer-ring chips, and the network server is structured under the Linux embedded environment, and MPEG4 compression and real time transmission are carried on. The experiment indicates that the video monitoring system can guarantee good effect, which can be applied to the safety of vegetable sheds.
McKenney, Susan; Voogt, Joke
Two studies were conducted to facilitate the development of feasible support for the process of integrating digital video making activities in the primary school language arts curriculum. The first study explored which teaching supports would be necessary to enable primary school children to create
Willmott, Christopher J. R.
There is growing recognition that science is not conducted in a vacuum and that advances in the biosciences have ethical and social implications for the wider community. An exercise is described in which undergraduate students work in teams to produce short videos about the science and ethical dimensions of current developments in biomedicine.…
Langbehn, Hendrickson Reiter; Ricci, Saulo M. R.; Gonçalves, Marcos A.; Almeida, Jussara Marques; Pappa, Gisele Lobo; Benevenuto, Fabrício
Most online video sharing systems (OVSSs), such as YouTube and Yahoo! Video, have several mechanisms for supporting interactions among users. One such mechanism is the video response feature in YouTube, which allows a user to post a video in response to another video. While increasingly popular, the video response feature opens the opportunity for non-cooperative users to introduce ``content pollution'' into the system, thus causing loss of service effectiveness and credibility as w...
Pedersen, Jørgen Lindgaard; Edwards, Kasper
Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...
Hanjalic, Alan; Ceccarelli, Marco; Lagendijk, Reginald L.; Biemond, Jan
In the European project SMASH mass-market storage systems for domestic use are under study. Besides the storage technology that is developed in this project, the related objective of user-friendly browsing/query of video data is studied as well. Key issues in developing a user-friendly system are (1) minimizing the user-intervention in preparatory steps (extraction and storage of representative information needed for browsing/query), (2) providing an acceptable representation of the stored video content in view of a higher automation level, (3) the possibility for performing these steps directly on the incoming stream at storage time, and (4) parameter-robustness of algorithms used for these steps. This paper proposes and validate novel approaches for automation of mentioned preparatory phases. A detection method for abrupt shot changes is proposed, using locally computed threshold based on a statistical model for frame-to-frame differences. For the extraction of representative frames (key frames) an approach is presented which distributes a given number of key frames over the sequence depending on content changes in a temporal segment of the sequence. A multimedia database is introduced, able to automatically store all bibliographic information about a recorded video as well as a visual representation of the content without any manual intervention from the user.
Li, Yucheng; Han, Dantao; Yan, Juanli
A wireless video surveillance system based on ARM was designed and implemented in this article. The newest ARM11 S3C6410 was used as the main monitoring terminal chip with the embedded Linux operating system. The video input was obtained by the analog CCD and transferred from analog to digital by the video chip TVP5150. The video was packed by RTP and transmitted by the wireless USB TL-WN322G+ after being compressed by H.264 encoders in S3C6410. Further more, the video images were preprocessed. It can detect the abnormities of the specified scene and the abnormal alarms. The video transmission definition is the standard definition 480P. The video stream can be real-time monitored. The system has been used in the real-time intelligent video surveillance of the specified scene.
Ishikawa, Tomoya; Yamazawa, Kazumasa; Sato, Tomokazu; Ikeda, Sei; Nakamura, Yutaka; Fujikawa, Kazutoshi; Sunahara, Hideki; Yokoya, Naokazu
In this paper, we describe a new telepresence system which enables a user to look around a virtualized real world easily in network environments. The proposed system includes omni-directional video viewers on web browsers and allows the user to look around the omni-directional video contents on the web browsers. The omni-directional video viewer is implemented as an Active-X program so that the user can install the viewer automatically only by opening the web site which contains the omni-directional video contents. The system allows many users at different sites to look around the scene just like an interactive TV using a multi-cast protocol without increasing the network traffic. This paper describes the implemented system and the experiments using live and stored video streams. In the experiment with stored video streams, the system uses an omni-directional multi-camera system for video capturing. We can look around high resolution and high quality video contents. In the experiment with live video streams, a car-mounted omni-directional camera acquires omni-directional video streams surrounding the car, running in an outdoor environment. The acquired video streams are transferred to the remote site through the wireless and wired network using multi-cast protocol. We can see the live video contents freely in arbitrary direction. In the both experiments, we have implemented a view-dependent presentation with a head-mounted display (HMD) and a gyro sensor for realizing more rich presence.
Bower, Matt; Cavanagh, Michael; Moloney, Robyn; Dao, MingMing
This paper reports on how the cognitive, behavioural and affective communication competencies of undergraduate students were developed using an online Video Reflection system. Pre-service teachers were provided with communication scenarios and asked to record short videos of one another making presentations. Students then uploaded their videos to…
Buhl, Mie; Andreasen, Lars Birch; Ørngreen, Rikke
productions developed by the students themselves. This is investigated from a theoretical as well as an empirical perspective, building on the authors’ experiences from researching and teaching dealing with production of video in learning situations, with different learning objectives and didactic designs...... in mind. The chapter presents an overview of the state-of-the art of research on using video productions as learning resources, followed by discussions of our own research results and practices. From the overview and the discussions concepts are defined and research questions formed, based on a multimodal...... perspective on teaching and educational design. We conclude by arguing where and why there is a need for more knowledge about video productions' potential as learning resources....
Buhl, Mie; Andreasen, Lars Birch; Ørngreen, Rikke
productions developed by the students themselves. This is investigated from a theoretical as well as an empirical perspective, building on the authors’ experiences from researching and teaching dealing with production of video in learning situations, with different learning objectives and didactic designs...... in mind. The paper will present an overview of the state-of-the art of research on using video productions as learning resources, followed by discussions of our own research results and practices. From the overview and the discussions concepts are defined and research questions formed, based...
AO-AIO 790 BOM CORP MCLEAN VA F/A 17/8 VIDEO AUTOMATIC TARGE T TRACKING SYSTEM (VATTS) OPERATING PROCEO -ETC(U) AUG Go C STAMM J P ORRESTER, J...Tape Transport Number Two TKI Tektronics I/0 Terminal DS1 Removable Disk Storage Unit DSO Fixed Disk Storage Unit CRT Cathode Ray Tube 1-3 THE BDM...file (mark on Mag Tape) AZEL Quick look at Trial Information Program DUPTAPE Allows for duplication of magnetic tapes CA Cancel ( terminates program on
Archetti, Renata; Vacchi, Matteo; Carniel, Sandro; Benetazzo, Alvise
Measuring the location of the shoreline and monitoring foreshore changes through time represent a fundamental task for correct coastal management at many sites around the world. Several authors demonstrated video systems to be an essential tool for increasing the amount of data available for coastline management. These systems typically sample at least once per hour and can provide long-term datasets showing variations over days, events, months, seasons and years. In the past few years, due to the wide diffusion of video cameras at relatively low price, the use of video cameras and of video images analysis for environmental control has increased significantly. Even if video monitoring systems were often used in the research field they are most often applied with practical purposes including: i) identification and quantification of shoreline erosion, ii) assessment of coastal protection structure and/or beach nourishment performance, and iii) basic input to engineering design in the coastal zone iv) support for integrated numerical model validation Here we present the guidelines for the creation of a new video monitoring network in the proximity of the Jesolo beach (NW of the Adriatic Sea, Italy), Within this 10 km-long tourist district several engineering structures have been built in recent years, with the aim of solving urgent local erosion problems; as a result, almost all types of protection structures are present at this site: groynes, detached breakwaters.The area investigated experienced severe problems of coastal erosion in the past decades, inclusding a major one in the last November 2012. The activity is planned within the framework of the RITMARE project, that is also including other monitoring and scientific activities (bathymetry survey, waves and currents measurements, hydrodynamics and morphodynamic modeling). This contribution focuses on best practices to be adopted in the creation of the video monitoring system, and briefly describes the
Full Text Available We investigate the video assignment problem of a hierarchical Video-on-Demand (VOD system in heterogeneous environments where different quality levels of videos can be encoded using either replication or layering. In such systems, videos are delivered to clients either through a proxy server or video broadcast/unicast channels. The objective of our work is to determine the appropriate coding strategy as well as the suitable delivery mechanism for a specific quality level of a video such that the overall system blocking probability is minimized. In order to find a near-optimal solution for such a complex video assignment problem, an evolutionary approach based on genetic algorithm (GA is proposed. From the results, it is shown that the system performance can be significantly enhanced by efficiently coupling the various techniques.
White, Preston, III
Kennedy Space Center has the need for economical transmission of two multiplexed video signals along multimode fiberoptic systems. These systems must span unusual distances and must meet RS-250B short-haul standards after reception. Bandwidth is a major problem and studies of the installed fibers, available LEDs and PINFETs led to the choice of 100 MHz as the upper limit for the system bandwidth. Optical multiplexing and digital transmission were deemed inappropriate. Three electrical multiplexing schemes were chosen for further study. Each of the multiplexing schemes included an FM stage to help meet the stringent S/N specification. Both FM and AM frequency division multiplexing methods were investigated theoretically and these results were validated with laboratory tests. The novel application of quadrature amplitude multiplexing was also considered. Frequency division multiplexing of two wideband FM video signal appears the most promising scheme although this application requires high power highly linear LED transmitters. Futher studies are necessary to determine if LEDs of appropriate quality exist and to better quantify performance of QAM in this application.
Full Text Available Abstract Interest in 3D video applications and systems is growing rapidly and technology is maturating. It is expected that multiview autostereoscopic displays will play an important role in home user environments, since they support multiuser 3D sensation and motion parallax impression. The tremendous data rate cannot be handled efficiently by representation and coding formats such as MVC or MPEG-C Part 3. Multiview video plus depth (MVD is a new format that efficiently supports such advanced 3DV systems, but this requires high-quality intermediate view synthesis. For this, a new approach is presented that separates unreliable image regions along depth discontinuities from reliable image regions, which are treated separately and fused to the final interpolated view. In contrast to previous layered approaches, our algorithm uses two boundary layers and one reliable layer, performs image-based 3D warping only, and was generically implemented, that is, does not necessarily rely on 3D graphics support. Furthermore, different hole-filling and filtering methods are added to provide high-quality intermediate views. As a result, high-quality intermediate views for an existing 9-view auto-stereoscopic display as well as other stereo- and multiscopic displays are presented, which prove the suitability of our approach for advanced 3DV systems.
U.S. Environmental Protection Agency — The Pesticide Product Label System (PPLS) provides a collection of pesticide product labels (Adobe PDF format) that have been approved by EPA under Section 3 of the...
Shopovska, Ivana; Jovanov, Ljubomir; Goossens, Bart; Philips, Wilfried
High dynamic range (HDR) image generation from a number of differently exposed low dynamic range (LDR) images has been extensively explored in the past few decades, and as a result of these efforts a large number of HDR synthesis methods have been proposed. Since HDR images are synthesized by combining well-exposed regions of the input images, one of the main challenges is dealing with camera or object motion. In this paper we propose a method for the synthesis of HDR video from a single camera using multiple, differently exposed video frames, with circularly alternating exposure times. One of the potential applications of the system is in driver assistance systems and autonomous vehicles, involving significant camera and object movement, non- uniform and temporally varying illumination, and the requirement of real-time performance. To achieve these goals simultaneously, we propose a HDR synthesis approach based on weighted averaging of aligned radiance maps. The computational complexity of high-quality optical flow methods for motion compensation is still pro- hibitively high for real-time applications. Instead, we rely on more efficient global projective transformations to solve camera movement, while moving objects are detected by thresholding the differences between the trans- formed and brightness adapted images in the set. To attain temporal consistency of the camera motion in the consecutive HDR frames, the parameters of the perspective transformation are stabilized over time by means of computationally efficient temporal filtering. We evaluated our results on several reference HDR videos, on synthetic scenes, and using 14-bit raw images taken with a standard camera.
Sandy, C. L. M.; Meiyanti, R.
A measurement of height is comparing the value of the magnitude of an object with a standard measuring tool. The problems that exist in the measurement are still the use of a simple apparatus in which one of them is by using a meter. This method requires a relatively long time. To overcome these problems, this research aims to create software with image processing that is used for the measurement of height. And subsequent that image is tested, where the object captured by the video camera can be known so that the height of the object can be measured using the learning method of Otsu. The system was built using Delphi 7 of Vision Lab VCL 4.5 component. To increase the quality of work of the system in future research, the developed system can be combined with other methods.
Giaccone, Agnese; Solli, Piergiorgio; Bertolaccini, Luca
The magnetic anchoring guidance system (MAGS) is one of the most promising technological innovations in minimally invasive surgery and consists in two magnetic elements matched through the abdominal or thoracic wall. The internal magnet can be inserted into the abdominal or chest cavity through a small single incision and then moved into position by manipulating the external component. In addition to a video camera system, the inner magnetic platform can house remotely controlled surgical tools thus reducing instruments fencing, a serious inconvenience of the uniportal access. The latest prototypes are equipped with self-light-emitting diode (LED) illumination and a wireless antenna for signal transmission and device controlling, which allows bypassing the obstacle of wires crossing the field of view (FOV). Despite being originally designed for laparoscopic surgery, the MAGS seems to suit optimally the characteristics of the chest wall and might meet the specific demands of video-assisted thoracic surgery (VATS) surgery in terms of ergonomics, visualization and surgical performance; moreover, it involves less risks for the patients and an improved aesthetic outcome.
Yang, Jie Chi; Huang, Yi Ting; Tsai, Chi Cheng; Chung, Ching I.; Wu, Yu Chieh
In recent years, using video as a learning resource has received a lot of attention and has been successfully applied to many learning activities. In comparison with text-based learning, video learning integrates more multimedia resources, which usually motivate learners more than texts. However, one of the major limitations of video learning is…
Terakawa, Yuzo; Ishibashi, Kenichi; Goto, Takeo; Ohata, Kenji
Three-dimensional (3-D) video recording of microsurgery is a more promising tool for presentation and education of microsurgery than conventional two-dimensional video systems, but has not been widely adopted partly because 3-D image processing of previous 3-D video systems is complicated and observers without optical devices cannot visualize the 3-D image. A new technical development for 3-D video presentation of microsurgery is described. Microsurgery is recorded with a microscope equipped with a single high-definition (HD) video camera. This 3-D video system records the right- and left-eye views of the microscope simultaneously as single HD data with the use of a 3-D camera adapter: the right- and left-eye views of the microscope are displayed separately on the right and left sides, respectively. The operation video is then edited with video editing software so that the right-eye view is displayed on the left side and left-eye view is displayed on the right side. Consequently, a 3-D video of microsurgery can be created by viewing the edited video by the cross-eyed stereogram viewing method without optical devices. The 3-D microsurgical video provides a more accurate view, especially with regard to depth, and a better understanding of microsurgical anatomy. Although several issues are yet to be addressed, this 3-D video system is a useful method of recording and presenting microsurgery for 3-D viewing with currently available equipment, without optical devices.
Bhattacharya, Sharmila; Inan, Omer; Kovacs, Gregory; Etemadi, Mozziyar; Sanchez, Max; Marcu, Oana
populations in terrestrial experiments, and could be especially useful in field experiments in remote locations. Two practical limitations of the system should be noted: first, only walking flies can be observed - not flying - and second, although it enables population studies, tracking individual flies within the population is not currently possible. The system used video recording and an analog circuit to extract the average light changes as a function of time. Flies were held in a 5-cm diameter Petri dish and illuminated from below by a uniform light source. A miniature, monochrome CMOS (complementary metal-oxide semiconductor) video camera imaged the flies. This camera had automatic gain control, and this did not affect system performance. The camera was positioned 5-7 cm above the Petri dish such that the imaging area was 2.25 sq cm. With this basic setup, still images and continuous video of 15 flies at one time were obtained. To reduce the required data bandwidth by several orders of magnitude, a band-pass filter (0.3-10 Hz) circuit compressed the video signal and extracted changes in image luminance over time. The raw activity signal output of this circuit was recorded on a computer and digitally processed to extract the fly movement "events" from the waveform. These events corresponded to flies entering and leaving the image and were used for extracting activity parameters such as inter-event duration. The efficacy of the system in quantifying locomotor activity was evaluated by varying environmental temperature, then measuring the activity level of the flies.
Economides, M.J.; Hill, A.D.; Ehlig-Economides, C.
Petroleum production engineering attempts to maximize production in two connected systems, the reservoir and the artificial structures related to a well field. Determining whether it is economically feasible to drill a discovered source requires a familiarity with a variety of topics and theories. This book devotes the first six chapters to these concepts, including production from undersaturated oil reserves, production from two-phase reservoirs, production from natural gas reservoirs, skin effects, and gravel pack completions. The second part of the production engineer`s mission is maximization of output in the artificial structures, which include the well, bottomhole, and wellhead assemblies, and the surface gathering, separation, and storage facilities. This general system is discussed throughout the remainder of the book. Chapter topics include wellbore flow performance, forecast of well production, well test design and data acquisition, matrix acidizing, hydraulic fracturing for well simulation, gas lift, and systems analysis.
M. M. Blagoveshchenskaya
Full Text Available Summary. The most important operation of granular mixed fodder production is molding process. Properties of granular mixed fodder are defined during this process. They determine the process of production and final product quality. The possibility of digital video camera usage as intellectual sensor for control system in process of production is analyzed in the article. The developed parametric model of the process of bundles molding from granular fodder mass is presented in the paper. Dynamic characteristics of the molding process were determined. A mathematical model of motion of bundle of granular fodder mass after matrix holes was developed. The developed mathematical model of the automatic control system (ACS with the use of etalon video frame as the set point in the MATLAB software environment was shown. As a parameter of the bundles molding process it is proposed to use the value of the specific area defined in the mathematical treatment of the video frame. The algorithms of the programs to determine the changes in structural and mechanical properties of the feed mass in video frames images were developed. Digital video shooting of various modes of the molding machine was carried out and after the mathematical processing of video the transfer functions for use as a change of adjustable parameters of the specific area were determined. Structural and functional diagrams of the system of regulation of the food bundles molding process with the use of digital camcorders were built and analyzed. Based on the solution of the equations of fluid dynamics mathematical model of bundle motion after leaving the hole matrix was obtained. In addition to its viscosity, creep property was considered that is characteristic of the feed mass. The mathematical model ACS of the bundles molding process allowing to investigate transient processes which occur in the control system that uses a digital video camera as the smart sensor was developed in Simulink
Full Text Available This paper presents an H.323 standard compliant virtual video conferencing system. The proposed system not only serves as a multipoint control unit (MCU for multipoint connection but also provides a gateway function between the H.323 LAN (local-area network and the H.324 WAN (wide-area network users. The proposed virtual video conferencing system provides user-friendly object compositing and manipulation features including 2D video object scaling, repositioning, rotation, and dynamic bit-allocation in a 3D virtual environment. A reliable, and accurate scheme based on background image mosaics is proposed for real-time extracting and tracking foreground video objects from the video captured with an active camera. Chroma-key insertion is used to facilitate video objects extraction and manipulation. We have implemented a prototype of the virtual conference system with an integrated graphical user interface to demonstrate the feasibility of the proposed methods.
Blichfeldt, Henrik; Knudsen, Mette Præst
Alignment of market demand and manufacturing capabilities are directly linked to the potential competitive advantage. Pressure for manufacturing companies to customize increase the need for productions systems to handle innovations, especially in SMEs. The paper claims that innovativeness has...... a positive influence of the ability of the manufacturing system to provide specific capabilities that enables the entire production system to positively influence the competitiveness. A comparative case study of three SMEs shows that competitive advantages are obtained through innovative technologies...
Full Text Available This work presents a novel indoor video surveillance system, capable of detecting the falls of humans. The proposed system can detect and evaluate human posture as well. To evaluate human movements, the background model is developed using the codebook method, and the possible position of moving objects is extracted using the background and shadow eliminations method. Extracting a foreground image produces more noise and damage in this image. Additionally, the noise is eliminated using morphological and size filters and this damaged image is repaired. When the image object of a human is extracted, whether or not the posture has changed is evaluated using the aspect ratio and height of a human body. Meanwhile, the proposed system detects a change of the posture and extracts the histogram of the object projection to represent the appearance. The histogram becomes the input vector of K-Nearest Neighbor (K-NN algorithm and is to evaluate the posture of the object. Capable of accurately detecting different postures of a human, the proposed system increases the fall detection accuracy. Importantly, the proposed method detects the posture using the frame ratio and the displacement of height in an image. Experimental results demonstrate that the proposed system can further improve the system performance and the fall down identification accuracy.
Ngo, Hau T.; Rakvic, Ryan N.; Broussard, Randy P.; Ives, Robert W.
FPGA devices with embedded DSP and memory blocks, and high-speed interfaces are ideal for real-time video processing applications. In this work, a hardware-software co-design approach is proposed to effectively utilize FPGA features for a prototype of an automated video surveillance system. Time-critical steps of the video surveillance algorithm are designed and implemented in the FPGAs logic elements to maximize parallel processing. Other non timecritical tasks are achieved by executing a high level language program on an embedded Nios-II processor. Pre-tested and verified video and interface functions from a standard video framework are utilized to significantly reduce development and verification time. Custom and parallel processing modules are integrated into the video processing chain by Altera's Avalon Streaming video protocol. Other data control interfaces are achieved by connecting hardware controllers to a Nios-II processor using Altera's Avalon Memory Mapped protocol.
Wen, Ming; Hu, Haibo
To meet the demands of high definition of video and transmission at real-time during the surgery of endoscope, this paper designs an HD mobile video transmission system. This system uses H.264/AVC to encode the original video data and transports it in the network by RTP/RTCP protocol. Meanwhile, the system implements a stable video transmission in portable terminals (such as tablet PCs, mobile phones) under the 3G mobile network. The test result verifies the strong repair ability and stability under the conditions of low bandwidth, high packet loss rate, and high delay and shows a high practical value.
Pereira, Marcus Vinicius; de Souza Barros, Susana; de Rezende Filho, Luiz Augusto C.; de A. Fauth, Leduc Hermeto
Constant technological advancement has facilitated access to digital cameras and cell phones. Involving students in a video production project can work as a motivating aspect to make them active and reflective in their learning, intellectually engaged in a recursive process. This project was implemented in high school level physics laboratory…
Walton, James S.; Hallamasek, Karen G.
The value of high-speed imaging for making subjective assessments is widely recognized, but the inability to acquire useful data from image sequences in a timely fashion has severely limited the use of the technology. 4DVideo has created a foundation for a generic instrument that can capture kinematic data from high-speed images. The new system has been designed to acquire (1) two-dimensional trajectories of points; (2) three-dimensional kinematics of structures or linked rigid-bodies; and (3) morphological reconstructions of boundaries. The system has been designed to work with an unlimited number of cameras configured as nodes in a network, with each camera able to acquire images at 1000 frames per second (fps) or better, with a spatial resolution of 512 X 512 or better, and an 8-bit gray scale. However, less demanding configurations are anticipated. The critical technology is contained in the custom hardware that services the cameras. This hardware optimizes the amount of information stored, and maximizes the available bandwidth. The system identifies targets using an algorithm implemented in hardware. When complete, the system software will provide all of the functionality required to capture and process video data from multiple perspectives. Thereafter it will extract, edit and analyze the motions of finite targets and boundaries.
Allin, Thomas Højgaard; Neubert, Torsten; Laursen, Steen
at the Pic du Midi Observatory in Southern France, the system was operational during the period from July 18 to September 15, 2003. The video system, based two low-light, non-intensified CCD video cameras, was mounted on top of a motorized pan/tilt unit. The cameras and the pan/tilt unit were controlled over...
Blair, Thomas Howard
Energy Production Systems Engineering presents IEEE, Electrical Apparatus Service Association (EASA), and International Electrotechnical Commission (IEC) standards of engineering systems and equipment in utility electric generation stations. Electrical engineers that practice in the energy industry must understand the specific characteristics of electrical and mechanical equipment commonly applied to energy production and conversion processes, including the mechanical and chemical processes involved, in order to design, operate and maintain electrical systems that support and enable these processes. To aid this understanding, Energy Production Systems Engineeringdescribes the equipment and systems found in various types of utility electric generation stations. This information is accompanied by examples and practice problems. It also addresses common issues of electrical safety that arise in electric generation stations.
Full Text Available This work presents a fall detection system that is based on image processing technology. The system can detect falling by various humans via analysis of video frame. First, the system utilizes the method of mixture and Gaussian background model to generate information about the background, and the noise and shadow of background are eliminated to extract the possible positions of moving objects. The extraction of a foreground image generates more noise and damage. Therefore, morphological and size filters are utilized to eliminate this noise and repair the damage to the image. Extraction of the foreground image yields the locations of human heads in the image. The median point, height, and aspect ratio of the people in the image are calculated. These characteristics are utilized to trace objects. The change of the characteristics of objects among various consecutive images can be used to evaluate those persons enter or leave the scene. The method of fall detection uses the height and aspect ratio of the human body, analyzes the image in which one person overlaps with another, and detects whether a human has fallen or not. Experimental results demonstrate that the proposed method can efficiently detect falls by multiple persons.
McAloone, Timothy Charles; Andreasen, Mogens Myrup
, for example, a factor 20 improvement in our environmental performance. One attempt, however, has recently emerged, which combines the product as an artefact with the service that the product provides to the user. Through the combination of these two facets, the company retains ownership of the physical...... artefact and instead provides what the customer really wants the actual functionality from the product. This enables a series of potential improvements to the product´s performance throughout its lifecycle. The ideal of product service system (PSS) development is that all three stakeholder groups customer......, company and society benefit from the service systems related to each one of these dimensions, rather than simply one of the above. There are existing examples of the enhancement of business and market share by focusing on PSS, but this is often not a result of upfront strategy and ambitious goals. We...
de Barros, Rui Sergio Monteiro; Brito, Marcus Vinicius Henriques; de Brito, Marcelo Houat; de Aguiar Lédo Coutinho, Jean Vitor; Teixeira, Renan Kleber Costa; Yamaki, Vitor Nagai; da Silva Costa, Felipe Lobato; Somensi, Danusa Neves
The surgical microscope is an essential tool for microsurgery. Nonetheless, several promising alternatives are being developed, including endoscopes and laparoscopes with video systems. However, these alternatives have only been used for arterial anastomoses so far. The aim of this study was to evaluate the use of a low-cost video-assisted magnification system in end-to-side neurorrhaphy in rats. Forty rats were randomly divided into four matched groups: (1) normality (sciatic nerve was exposed but was kept intact); (2) denervation (fibular nerve was sectioned, and the proximal and distal stumps were sutured-transection without repair); (3) microscope; and (4) video system (fibular nerve was sectioned; the proximal stump was buried inside the adjacent musculature, and the distal stump was sutured to the tibial nerve). Microsurgical procedures were performed with guidance from a microscope or video system. We analyzed weight, nerve caliber, number of stitches, times required to perform the neurorrhaphy, muscle mass, peroneal functional indices, latency and amplitude, and numbers of axons. There were no significant differences in weight, nerve caliber, number of stitches, muscle mass, peroneal functional indices, or latency between microscope and video system groups. Neurorrhaphy took longer using the video system (P microscope group than in the video group. It is possible to perform an end-to-side neurorrhaphy in rats through video system magnification. The success rate is satisfactory and comparable with that of procedures performed under surgical microscopes. Copyright © 2017 Elsevier Inc. All rights reserved.
Palmgren-Neuvonen, Laura; Jaakkola, Maarit; Korkeamäki, Riitta-Liisa
This article reports a case study on sChOOLtv, an online television for primary and secondary schools that aims to bridge the media gap between in-school and out-of-school learning environments. Contrary to its creators' expectations, the number of published videos has not increased since its establishment. Furthermore, the videos were mostly…
Recent years have seen significant investment and increasingly effective use of Video Analytics (VA) systems to detect intrusion or attacks in sterile areas. Currently there are a number of manufacturers who have achieved the Imagery Library for Intelligent Detection System (i-LIDS) primary detection classification performance standard for the sterile zone detection scenario. These manufacturers have demonstrated the performance of their systems under evaluation conditions using an uncompressed evaluation video. In this paper we consider the effect on the detection rate of an i-LIDS primary approved sterile zone system using compressed sterile zone scenario video clips as the input. The preliminary test results demonstrate a change time of detection rate with compression as the time to alarm increased with greater compression. Initial experiments suggest that the detection performance does not linearly degrade as a function of compression ratio. These experiments form a starting point for a wider set of planned trials that the Home Office will carry out over the next 12 months.
Cheung, R T F; Lyden, P D; Tsoi, T H; Huang, Y; Liu, M; Hon, S F K; Raman, R; Liu, L
The National Institutes of Health Stroke Scale (NIHSS) is an integral part of acute stroke assessment. We report our experience with new Putonghua- and Cantonese-Chinese language NIHSS (PC-NIHSS and CC-NIHSS) training and certification videos. A professional video production company was hired to create the training and certification videos for both PC-NIHSS and CC-NIHSS. Two training and certification workshops were held in Chengdu and Beijing, and two workshops in Hong Kong. The instruction, training and group A certification videos were presented to workshop attendees. Unweighted kappa statistics were used to measure the agreement among raters, and the inter-rater agreements for PC-NIHSS and CC-NIHSS videos were compared with those of original English language NIHSS (E-NIHSS) videos. The pass rates using PC-NIHSS and CC-NIHSS videos were 79% and 82%, respectively. All possible responses on individual scale items were included. Facial palsy and limb ataxia (13%) showed poor agreement, nine (60%) to 10 (67%) items showed moderate agreement (0.4videos, the agreements on best gaze, visual fields, facial weakness and aphasia were less for PC-NIHSS videos, and the agreements on commands for level of consciousness and visual fields were less for CC-NIHSS videos. Nevertheless, there was no difference between PC-NIHSS or CC-NIHSS and E-NIHSS videos in the agreement on total score. Compared with E-NIHSS videos, PC-NIHSS and CC-NIHSS videos show good content validity and inter-rater reliability. Availability of these videos may facilitate the proper use of NIHSS among physicians and nurses in Putonghua- or Cantonese-speaking communities.
Borodin, Mikhail; The ATLAS collaboration; De, Kaushik; Klimentov, Alexei; Golubkov, Dmitry; Maeno, Tadashi; Mashinistov, Ruslan; Wenaus, Torre; Padolski, Siarhei
The second generation of the ATLAS production system called ProdSys2 is a distributed workload manager which used by thousands of physicists to analyze the data remotely, with the volume of processed data is beyond the exabyte scale, across a more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criterias, such as input and output size, memory requirements and CPU consumption with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. Besides jobs definition Production System also includes flexible web user interface, which implements user-friendly environment for main ATLAS workflows, e.g. simple way of combining different data flows, and real-time monitoring, optimised for using with huge amount of information to present. We present an overview of the ATLAS Production System major components: job and task definition, workflow manager web user i...
National Aeronautics and Space Administration — In this project, the development of a novel panoramic, stereoscopic video system was proposed. The proposed system, which contains no moving parts, uses three-fixed...
Christiansen, Thomas Bøhm
This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...
Yamada, Takaaki; Echizen, Isao; Tezuka, Satoru; Yoshiura, Hiroshi
Emerging broadband networks and high performance of PCs provide new business opportunities of the live video streaming services for the Internet users in sport events or in music concerts. Digital watermarking for video helps to protect the copyright of the video content and the real-time processing is an essential requirement. For the small start of new business, it should be achieved by flexible software without special equipments. This paper describes a novel real-time watermarking system implemented on a commodity PC. We propose the system architecture and methods to shorten watermarking time by reusing the estimated watermark imperceptibility among neighboring frames. A prototype system enables real time processing in a series of capturing NTSC signals, watermarking the video, encoding it to MPEG4 in QGVA, 1Mbps, 30fps style and storing the video for 12 hours in maximum
Ramezani, Mohsen; Yaghmaee, Farzin
In recent years, fast growth of online video sharing eventuated new issues such as helping users to find their requirements in an efficient way. Hence, Recommender Systems (RSs) are used to find the users' most favorite items. Finding these items relies on items or users similarities. Though, many factors like sparsity and cold start user impress the recommendation quality. In some systems, attached tags are used for searching items (e.g. videos) as personalized recommendation. Different views, incomplete and inaccurate tags etc. can weaken the performance of these systems. Considering the advancement of computer vision techniques can help improving RSs. To this end, content based search can be used for finding items (here, videos are considered). In such systems, a video is taken from the user to find and recommend a list of most similar videos to the query one. Due to relating most videos to humans, we present a novel low complex scalable method to recommend videos based on the model of included action. This method has recourse to human action retrieval approaches. For modeling human actions, some interest points are extracted from each action and their motion information are used to compute the action representation. Moreover, a fuzzy dissimilarity measure is presented to compare videos for ranking them. The experimental results on HMDB, UCFYT, UCF sport and KTH datasets illustrated that, in most cases, the proposed method can reach better results than most used methods.
Florez-Morris, Mauricio; Tafur, Irene
Video production has come into widespread use in various fields of social science. Visual anthropologists (Pink 2006), psychologists (Webster and Sell 2007), historians (Ferro 2000), and visual sociologists (Newman 2006) have used films and videos to document, to preserve, and to analyze social data. There is no reason to think that the use of…
... systems for the delivery of video programming. 63.02 Section 63.02 Telecommunication FEDERAL... systems for the delivery of video programming. (a) Any common carrier is exempt from the requirements of... with respect to the establishment or operation of a system for the delivery of video programming. ...
... COMMISSION In the Matter of Certain Video Game Systems and Wireless Controllers and Components Thereof... importation, and the sale within the United States after importation of certain video game systems and... importation of certain video game systems and wireless controllers and components thereof that infringe one or...
Valkenburg, P.M.; Beentjes, J.W.J.; Nikken, P.; Tan, E.S.H.
Kijkwijzer is the name of the new Dutch rating system in use since early 2001 to provide information about the possible harmful effects of movies, home videos and television programs on young people. The rating system is meant to provide audiovisual productions with both age-based and content-based
Full Text Available Abstract Today's video surveillance systems are increasingly equipped with video content analysis for a great variety of applications. However, reliability and robustness of video content analysis algorithms remain an issue. They have to be measured against ground truth data in order to quantify the performance and advancements of new algorithms. Therefore, a variety of measures have been proposed in the literature, but there has neither been a systematic overview nor an evaluation of measures for specific video analysis tasks yet. This paper provides a systematic review of measures and compares their effectiveness for specific aspects, such as segmentation, tracking, and event detection. Focus is drawn on details like normalization issues, robustness, and representativeness. A software framework is introduced for continuously evaluating and documenting the performance of video surveillance systems. Based on many years of experience, a new set of representative measures is proposed as a fundamental part of an evaluation framework.
Full Text Available Today's video surveillance systems are increasingly equipped with video content analysis for a great variety of applications. However, reliability and robustness of video content analysis algorithms remain an issue. They have to be measured against ground truth data in order to quantify the performance and advancements of new algorithms. Therefore, a variety of measures have been proposed in the literature, but there has neither been a systematic overview nor an evaluation of measures for specific video analysis tasks yet. This paper provides a systematic review of measures and compares their effectiveness for specific aspects, such as segmentation, tracking, and event detection. Focus is drawn on details like normalization issues, robustness, and representativeness. A software framework is introduced for continuously evaluating and documenting the performance of video surveillance systems. Based on many years of experience, a new set of representative measures is proposed as a fundamental part of an evaluation framework.
Zhao, Baoquan; Xu, Songhua; Lin, Shujin; Luo, Xiaonan; Duan, Lian
Panayides, A S; Pattichis, M S; Constantinides, A G; Pattichis, C S
The emergence of the new, High Efficiency Video Coding (HEVC) standard, combined with wide deployment of 4G wireless networks, will provide significant support toward the adoption of mobile-health (m-health) medical video communication systems in standard clinical practice. For the first time since the emergence of m-health systems and services, medical video communication systems can be deployed that can rival the standards of in-hospital examinations. In this paper, we provide a thorough overview of today's advancements in the field, discuss existing approaches, and highlight the future trends and objectives.
Vinicius Pereira, Marcus; de Souza Barros, Susana; de Rezende Filho, Luiz Augusto C.; Fauth, Leduc Hermeto de A.
Constant technological advancement has facilitated access to digital cameras and cell phones. Involving students in a video production project can work as a motivating aspect to make them active and reflective in their learning, intellectually engaged in a recursive process. This project was implemented in high school level physics laboratory classes resulting in 22 videos which are considered as audiovisual reports and analysed under two components: theoretical and experimental. This kind of project allows the students to spontaneously use features such as music, pictures, dramatization, animations, etc, even when the didactic laboratory may not be the place where aesthetic and cultural dimensions are generally developed. This could be due to the fact that digital media are more legitimately used as cultural tools than as teaching strategies.
Luitjens, S. B.; Rijckaert, A. M. A.
Since the first experiments on magnetic recording by Valdemar Poulsen in 1898 the use of this technology has grown tremendously and magnetic storage is used in almost every home in the world. A special challenge was the recording of video signals which need a high bandwidth. In the 1950s, television broadcasts had started which created a need for storage in the broadcast world. The first broadcast recorder was the Quadruplex from Ampex in 1956. Later solutions were found for application in the consumer market. Better mechanics, magnetic tapes and recording heads allowed the mass production of a cheap consumer recorder. The size and weight decreased tremendously and portable camcorders are very common. Recording of broadcasts, video rental and home movies are now very popular. The factors which contributed to the maturing of this technology will be reviewed in this paper.
Full Text Available Design of automated video surveillance systems is one of the exigent missions in computer vision community because of their ability to automatically select frames of interest in incoming video streams based on motion detection. This research paper focuses on the real-time hardware implementation of a motion detection algorithm for such vision based automated surveillance systems. A dedicated VLSI architecture has been proposed and designed for clustering-based motion detection scheme. The working prototype of a complete standalone automated video surveillance system, including input camera interface, designed motion detection VLSI architecture, and output display interface, with real-time relevant motion detection capabilities, has been implemented on Xilinx ML510 (Virtex-5 FX130T FPGA platform. The prototyped system robustly detects the relevant motion in real-time in live PAL (720 × 576 resolution video streams directly coming from the camera.
Mathiak, Krystyna A; Klasen, Martin; Weber, René; Ackermann, Hermann; Shergill, Sukhwinder S; Mathiak, Klaus
.... It was demonstrated that playing a video game leads to striatal dopamine release. It is unclear, however, which aspects of the game cause this reward system activation and if violent content contributes...
Xia, Zhen-Hua; Wang, Xiao-Shuang
With the rapid development of the electronic technology, multimedia technology and mobile communication technology, video monitoring system is going to the embedded, digital and wireless direction. In this paper, a solution of wireless video monitoring system based on WCDMA is proposed. This solution makes full use of the advantages of 3G, which have Extensive coverage network and wide bandwidth. It can capture the video streaming from the chip's video port, real-time encode the image data by the high speed DSP, and have enough bandwidth to transmit the monitoring image through WCDMA wireless network. The experiments demonstrate that the system has the advantages of high stability, good image quality, good transmission performance, and in addition, the system has been widely used, not be restricted by geographical position since it adopts wireless transmission. So, it is suitable used in sparsely populated, harsh environment scenario.
classic films Ii- into separate FM signals for video dual soundtrack or stereo sound censed from nearlk every major stu- and audio. Another...though never disruptive. While my enthusiasm for the subject was distinctly lim- i’ed. I felt almost as if Iwere in the presence of a histori - cally
Full Text Available Video surveillance systems are based on video and image processing research areas in the scope of computer science. Video processing covers various methods which are used to browse the changes in existing scene for specific video. Nowadays, video processing is one of the important areas of computer science. Two-dimensional videos are used to apply various segmentation and object detection and tracking processes which exists in multimedia content-based indexing, information retrieval, visual and distributed cross-camera surveillance systems, people tracking, traffic tracking and similar applications. Background subtraction (BS approach is a frequently used method for moving object detection and tracking. In the literature, there exist similar methods for this issue. In this research study, it is proposed to provide a more efficient method which is an addition to existing methods. According to model which is produced by using adaptive background subtraction (ABS, an object detection and tracking system’s software is implemented in computer environment. The performance of developed system is tested via experimental works with related video datasets. The experimental results and discussion are given in the study
Chen, Jin; Wang, Yifan; Wang, Xuelei; Wang, Yuehong; Hu, Rui
Combine harvester usually works in sparsely populated areas with harsh environment. In order to achieve the remote real-time video monitoring of the working state of combine harvester. A remote video monitoring system based on ARM11 and embedded Linux is developed. The system uses USB camera for capturing working state video data of the main parts of combine harvester, including the granary, threshing drum, cab and cut table. Using JPEG image compression standard to compress video data then transferring monitoring screen to remote monitoring center over the network for long-range monitoring and management. At the beginning of this paper it describes the necessity of the design of the system. Then it introduces realization methods of hardware and software briefly. And then it describes detailedly the configuration and compilation of embedded Linux operating system and the compiling and transplanting of video server program are elaborated. At the end of the paper, we carried out equipment installation and commissioning on combine harvester and then tested the system and showed the test results. In the experiment testing, the remote video monitoring system for combine harvester can achieve 30fps with the resolution of 800x600, and the response delay in the public network is about 40ms.
Brown, Michael A.
With the advent of broadcast television as a constant source of information throughout the NASA manned space flight Mission Control Center (MCC) at the Johnson Space Center (JSC), the current Video Transport System (VTS) characteristics provides the ability to visually enhance real-time applications as a broadcast channel that decision making flight controllers come to rely on, but can be difficult to maintain and costly. The Operations Technology Facility (OTF) of the Mission Operations Facility Division (MOFD) has been tasked to provide insight to new innovative technological solutions for the MCC environment focusing on alternative architectures for a VTS. New technology will be provided to enable sharing of all imagery from one specific computer display, better known as Display Sharing (DS), to other computer displays and display systems such as; large projector systems, flight control rooms, and back supporting rooms throughout the facilities and other offsite centers using IP networks. It has been stated that Internet Protocol (IP) applications are easily readied to substitute for the current visual architecture, but quality and speed may need to be forfeited for reducing cost and maintainability. Although the IP infrastructure can support many technologies, the simple task of sharing ones computer display can be rather clumsy and difficult to configure and manage to the many operators and products. The DS process shall invest in collectively automating the sharing of images while focusing on such characteristics as; managing bandwidth, encrypting security measures, synchronizing disconnections from loss of signal / loss of acquisitions, performance latency, and provide functions like, scalability, multi-sharing, ease of initial integration / sustained configuration, integration with video adjustments packages, collaborative tools, host / recipient controllability, and the utmost paramount priority, an enterprise solution that provides ownership to the whole
Full Text Available To make people at different places participate in the same conference, speak and discuss freely, the interactive remote video conferencing system is designed and realized based on multi-Agent collaboration. FEC (forward error correction and tree P2P technology are firstly used to build a live conference structure to transfer audio and video data; then the branch conference port can participate to speak and discuss through the application of becoming a interactive focus; the introduction of multi-Agent collaboration technology improve the system robustness. The experiments showed that, under normal network conditions, the system can support 350 branch conference node simultaneously to make live broadcasting. The audio and video quality is smooth. It can carry out large-scale remote video conference.
Full Text Available Video applications using mobile wireless devices are a challenging task due to the limited capacity of batteries. The higher complex functionality of video decoding needs high resource requirements. Thus, power efficient control has become more critical design with devices integrating complex video processing techniques. Previous works on power efficient control in video decoding systems often aim at the low complexity design and not explicitly consider the scalable impact of subfunctions in decoding process, and seldom consider the relationship with the features of compressed video date. This paper is dedicated to developing an energy-scalable video decoding (ESVD strategy for energy-limited mobile terminals. First, ESVE can dynamically adapt the variable energy resources due to the device aware technique. Second, ESVD combines the decoder control with decoded data, through classifying the data into different partition profiles according to its characteristics. Third, it introduces utility theoretical analysis during the resource allocation process, so as to maximize the resource utilization. Finally, it adapts the energy resource as different energy budget and generates the scalable video decoding output under energy-limited systems. Experimental results demonstrate the efficiency of the proposed approach.
Levine, Howard G.; Smith, Trent M.
The Vegetable Production System (Veggie) was developed by Orbital Technologies Corp. to be a simple, easily stowed, and high growth volume yet low resource facility capable of producing fresh vegetables on the International Space Station (ISS). In addition to growing vegetables in space, Veggie can support a variety of experiments designed to determine how plants respond to microgravity, provide real-time psychological benefits for the crew, and conduct outreach activities. Currently, Veggie provides the largest volume available for plant growth on the ISS.
Heckendorn, F.M.; Robinson, C.W.
Specialized miniature low cost video equipment has been effectively used in a number of remote, radioactive, and contaminated environments at the Savannah River Site (SRS). The equipment and related techniques have reduced the potential for personnel exposure to both radiation and physical hazards. The valuable process information thus provided would not have otherwise been available for use in improving the quality of operation at SRS.
U.S. Environmental Protection Agency — The Pesticide Product Information System contains information concerning all pesticide products registered in the United States. It includes registrant name and...
Ehlert, Steven; Kingery, Aaron; Suggs, Robert
We present the results of new calibration tests performed by the NASA Meteoroid Environment Office (MEO) designed to help quantify and minimize systematic uncertainties in meteor photometry from video camera observations. These systematic uncertainties can be categorized by two main sources: an imperfect understanding of the linearity correction for the MEO's Watec 902H2 Ultimate video cameras and uncertainties in meteor magnitudes arising from transformations between the Watec camera's Sony EX-View HAD bandpass and the bandpasses used to determine reference star magnitudes. To address the first point, we have measured the linearity response of the MEO's standard meteor video cameras using two independent laboratory tests on eight cameras. Our empirically determined linearity correction is critical for performing accurate photometry at low camera intensity levels. With regards to the second point, we have calculated synthetic magnitudes in the EX bandpass for reference stars. These synthetic magnitudes enable direct calculations of the meteor's photometric flux within the camera bandpass without requiring any assumptions of its spectral energy distribution. Systematic uncertainties in the synthetic magnitudes of individual reference stars are estimated at ∼ 0.20 mag , and are limited by the available spectral information in the reference catalogs. These two improvements allow for zero-points accurate to ∼ 0.05 - 0.10 mag in both filtered and unfiltered camera observations with no evidence for lingering systematics. These improvements are essential to accurately measuring photometric masses of individual meteors and source mass indexes.
Ehlert, Steven; Kingery, Aaron; Suggs, Robert
We present the results of new calibration tests performed by the NASA Meteoroid Environment Oce (MEO) designed to help quantify and minimize systematic uncertainties in meteor photometry from video camera observations. These systematic uncertainties can be categorized by two main sources: an imperfect understanding of the linearity correction for the MEO's Watec 902H2 Ultimate video cameras and uncertainties in meteor magnitudes arising from transformations between the Watec camera's Sony EX-View HAD bandpass and the bandpasses used to determine reference star magnitudes. To address the rst point, we have measured the linearity response of the MEO's standard meteor video cameras using two independent laboratory tests on eight cameras. Our empirically determined linearity correction is critical for performing accurate photometry at low camera intensity levels. With regards to the second point, we have calculated synthetic magnitudes in the EX bandpass for reference stars. These synthetic magnitudes enable direct calculations of the meteor's photometric ux within the camera band-pass without requiring any assumptions of its spectral energy distribution. Systematic uncertainties in the synthetic magnitudes of individual reference stars are estimated at 0:20 mag, and are limited by the available spectral information in the reference catalogs. These two improvements allow for zero-points accurate to 0:05 ?? 0:10 mag in both ltered and un ltered camera observations with no evidence for lingering systematics.
Ferreira, João, E-mail: email@example.com [Instituto de Plasmas e Fusão Nuclear - Laboratório Associado, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Vale, Alberto [Instituto de Plasmas e Fusão Nuclear - Laboratório Associado, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Ribeiro, Isabel [Laboratório de Robótica e Sistemas em Engenharia e Ciência - Laboratório Associado, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal)
Highlights: ► Localization of cask and plug remote handling system with video cameras and markers. ► Video cameras already installed on the building for remote operators. ► Fiducial markers glued or painted on cask and plug remote handling system. ► Augmented reality contents on the video streaming as an aid for remote operators. ► Integration with other localization systems for enhanced robustness and precision. -- Abstract: The cask and plug remote handling system (CPRHS) provides the means for the remote transfer of in-vessel components and remote handling equipment between the Hot Cell building and the Tokamak building in ITER. Different CPRHS typologies will be autonomously guided following predefined trajectories. Therefore, the localization of any CPRHS in operation must be continuously known in real time to provide the feedback for the control system and also for the human supervision. This paper proposes a localization system that uses the video streaming captured by the multiple cameras already installed in the ITER scenario to estimate with precision the position and the orientation of any CPRHS. In addition, an augmented reality system can be implemented using the same video streaming and the libraries for the localization system. The proposed localization system was tested in a mock-up scenario with a scale 1:25 of the divertor level of Tokamak building.
Fog, Benedikte; Ulfkjær, Jacob Kanneworff Stigsen; Schlichter, Bjarne Rerup
not sufficiently reflect the theoretical recommendations of using video optimally in a management education. It did not comply with the video learning sequence as introduced by Marx and Frost (1998). However, it questions if the level of cognitive orientation activities can become too extensive. It finds......The study of business information systems has become increasingly important in the Digital Economy. However, it has been found that students have difficulties understanding the practical implications thereof and this leads to a motivational decreases. This study aims to investigate how to optimize...... the use of video to increase comprehension of the practical implications of studying business information systems. This qualitative study is based on observations and focus group interviews with first semester business students. The findings suggest that the video examined in the case study did...
Al Hadhrami, Tawfik; Nightingale, James M.; Wang, Qi; Grecos, Christos
In emergency situations, the ability to remotely monitor unfolding events using high-quality video feeds will significantly improve the incident commander's understanding of the situation and thereby aids effective decision making. This paper presents a novel, adaptive video monitoring system for emergency situations where the normal communications network infrastructure has been severely impaired or is no longer operational. The proposed scheme, operating over a rapidly deployable wireless mesh network, supports real-time video feeds between first responders, forward operating bases and primary command and control centers. Video feeds captured on portable devices carried by first responders and by static visual sensors are encoded in H.264/SVC, the scalable extension to H.264/AVC, allowing efficient, standard-based temporal, spatial, and quality scalability of the video. A three-tier video delivery system is proposed, which balances the need to avoid overuse of mesh nodes with the operational requirements of the emergency management team. In the first tier, the video feeds are delivered at a low spatial and temporal resolution employing only the base layer of the H.264/SVC video stream. Routing in this mode is designed to employ all nodes across the entire mesh network. In the second tier, whenever operational considerations require that commanders or operators focus on a particular video feed, a `fidelity control' mechanism at the monitoring station sends control messages to the routing and scheduling agents in the mesh network, which increase the quality of the received picture using SNR scalability while conserving bandwidth by maintaining a low frame rate. In this mode, routing decisions are based on reliable packet delivery with the most reliable routes being used to deliver the base and lower enhancement layers; as fidelity is increased and more scalable layers are transmitted they will be assigned to routes in descending order of reliability. The third tier
Moezzi, Saied; Katkere, Arun L.; Jain, Ramesh C.
Interactive video and television viewers should have the power to control their viewing position. To make this a reality, we introduce the concept of Immersive Video, which employs computer vision and computer graphics technologies to provide remote users a sense of complete immersion when viewing an event. Immersive Video uses multiple videos of an event, captured from different perspectives, to generate a full 3D digital video of that event. That is accomplished by assimilating important information from each video stream into a comprehensive, dynamic, 3D model of the environment. Using this 3D digital video, interactive viewers can then move around the remote environment and observe the events taking place from any desired perspective. Our Immersive Video System currently provides interactive viewing and `walkthrus' of staged karate demonstrations, basketball games, dance performances, and typical campus scenes. In its full realization, Immersive Video will be a paradigm shift in visual communication which will revolutionize television and video media, and become an integral part of future telepresence and virtual reality systems.
Hench, David L.
The H.264 video compression standard, aka MPEG 4 Part 10 aka Advanced Video Coding (AVC) allows new flexibility in the use of video in the battlefield. This standard necessitates encoder chips to effectively utilize the increased capabilities. Such chips are designed to cover the full range of the standard with designers of individual products given the capability of selecting the parameters that differentiate a broadcast system from a video conferencing system. The SmartCapture commercial product and the Universal Video Stick (UVS) military versions are about the size of a thumb drive with analog video input and USB (Universal Serial Bus) output and allow the user to select the parameters of imaging to the. Thereby, allowing the user to select video bandwidth (and video quality) using four dimensions of quality, on the fly, without stopping video transmission. The four dimensions are: 1) spatial, change from 720 pixel x 480 pixel to 320 pixel x 360 pixel to 160 pixel x 180 pixel, 2) temporal, change from 30 frames/ sec to 5 frames/sec, 3) transform quality with a 5 to 1 range, 4) and Group of Pictures (GOP) that affects noise immunity. The host processor simply wraps the H.264 network abstraction layer packets into the appropriate network packets. We also discuss the recently adopted scalable amendment to H.264 that will allow limit RAVC at any point in the communication chain by throwing away preselected packets.
Madiedo, J. M.; Trigo-Rodriguez, J. M.; Lyytinen, E.
The SPanish Meteor Network (SPMN) is performing a continuous monitoring of meteor activity over Spain and neighbouring countries. The huge amount of data obtained by the 25 video observing stations that this network is currently operating made it necessary to develop new software packages to accomplish some tasks, such as data reduction and remote operation of autonomous systems based on high-sensitivity CCD video devices. The main characteristics of this software are described here.
Jensen, Klaes Ladeby; Edwards, Kasper; Haug, Anders
Many organisations are moving from mass production to mass customization. Product configuration systems (PCS) are increasingly seen as an interesting option for firms who wish to pursue a strategy with a high degree of product variance while retaining a low cost of specifying the product. To become...... more specific in relation to how product configuration systems can support mass customization, it is necessary to understand how different product configuration systems can be classified, and how these differ. This paper presents a typology of product configuration systems based on the five kinds...
Giacomelli, G.A.; Sase, S.; Cramer, R; Hoogeboom, J.; McKenzie, A.; Parbst, K.; Sacrascia-Mugnozza, G.; Selina, P.; Sharp, D.A.; Voogt, J.O.; Weel, van, P.A.; Mears, D
Environmentally sound greenhouse production requires that: demand for market products is understood; greenhouse design addresses the climate circum-stances; input resources are available and consumed efficiently, and; there must be a reasonable balance of production products to the environmental impacts from system. Engineering greenhouse production systems to meet these requirements must include: a cost-effective and structurally sound facility; various sub-systems controlled to interact har...
Chen Homer H
Full Text Available The paradigm shift of network design from performance-centric to constraint-centric has called for new signal processing techniques to deal with various aspects of resource-constrained communication and networking. In this paper, we consider the computational constraints of a multimedia communication system and propose a video adaptation mechanism for live video streaming of multiple channels. The video adaptation mechanism includes three salient features. First, it adjusts the computational resource of the streaming server block by block to provide a fine control of the encoding complexity. Second, as far as we know, it is the first mechanism to allocate the computational resource to multiple channels. Third, it utilizes a complexity-distortion model to determine the optimal coding parameter values to achieve global optimization. These techniques constitute the basic building blocks for a successful application of wireless and Internet video to digital home, surveillance, IPTV, and online games.
Parihar, Vijay; Yadav, Y R; Kher, Yatin; Ratre, Shailendra; Sethi, Ashish; Sharma, Dhananjaya
Steep learning curve is found initially in pure endoscopic procedures. Video telescopic operating monitor (VITOM) is an advance in rigid-lens telescope systems provides an alternative method for learning basics of neuroendoscopy with the help of the familiar principle of microneurosurgery. The aim was to evaluate the clinical utility of VITOM as a learning tool for neuroendoscopy. Video telescopic operating monitor was used 39 cranial and spinal procedures and its utility as a tool for minimally invasive neurosurgery and neuroendoscopy for initial learning curve was studied. Video telescopic operating monitor was used in 25 cranial and 14 spinal procedures. Image quality is comparable to endoscope and microscope. Surgeons comfort improved with VITOM. Frequent repositioning of scope holder and lack of stereopsis is initial limiting factor was compensated for with repeated procedures. Video telescopic operating monitor is found useful to reduce initial learning curve of neuroendoscopy.
渡部, 和雄; 湯瀬, 裕昭; 渡邉, 貴之; 井口, 真彦; 藤田, 広一
The authors have developed a distance education system for interactive education which can transmit 4 video streams between distant lecture rooms. In this paper, we describe the results of our experiments using the system for adult education. We propose some efficient ways to use the system for adult education.
Suenaga, Ryo; Suzuki, Kazuyoshi; Tezuka, Tomoyuki; Panahpour Tehrani, Mehrdad; Takahashi, Keita; Fujii, Toshiaki
In this paper, we present a free viewpoint video generation system with billboard representation for soccer games. Free viewpoint video generation is a technology that enables users to watch 3-D objects from their desired viewpoints. Practical implementation of free viewpoint video for sports events is highly demanded. However, a commercially acceptable system has not yet been developed. The main obstacles are insufficient user-end quality of the synthesized images and highly complex procedures that sometimes require manual operations. In this work, we aim to develop a commercially acceptable free viewpoint video system with a billboard representation. A supposed scenario is that soccer games during the day can be broadcasted in 3-D, even in the evening of the same day. Our work is still ongoing. However, we have already developed several techniques to support our goal. First, we captured an actual soccer game at an official stadium where we used 20 full-HD professional cameras. Second, we have implemented several tools for free viewpoint video generation as follow. In order to facilitate free viewpoint video generation, all cameras should be calibrated. We calibrated all cameras using checker board images and feature points on the field (cross points of the soccer field lines). We extract each player region from captured images manually. The background region is estimated by observing chrominance changes of each pixel in temporal domain (automatically). Additionally, we have developed a user interface for visualizing free viewpoint video generation using a graphic library (OpenGL), which is suitable for not only commercialized TV sets but also devices such as smartphones. However, practical system has not yet been completed and our study is still ongoing.
Sebastiao Silva Vieira
Full Text Available This work presents an intervention research and participant that analyzes how the production of digital videos by students of a municipal school brings contributions to the construction of the knowledge contextualized in the teaching of sciences. For this purpose, references were used to cover four thematic areas: the use of digital technologies in the school context; The contextualization of contents in science education; Communication and mediation in school; And finally the production of digital video in science education. The qualitative methodology used, using semi-structured interviews and participant observation. Previously, the beginnings of the work of the students, workshops were created to create digital video, then a semistructured interview was carried out, in the post-production phase, with the students and the teacher. The results show that the production of digital videos have brought significant contributions to the students since participating in the workshop of video production, to the stage of conclusion and presentation of digital video in the classroom. With this, the students used the production of digital video as a differentiated methodology, source of research and production of knowledge. Participants, directors, learners and authors in the elaboration of the video, searching information related to the content, performing readings, planning the production, the "script", accompanying the assembly, using digital technologies in production, disseminating and participating in debates collectively. They constructed the knowledge proposed in science teaching and brought the curricular content studied into practice, reinforcing the discussion about the use and production of digital video as an educational tool.
Hoogenraad, M. S.; Wortmann, J. C.; Olhager, J; Persson, F
Modem production management systems consist of transaction processing systems and decision enhancement systems. A clear example of two such components are an ERP systems and APS systems. These systems are often standard software systems, and therefore suitable for many different situations. This
Boorla, Srinivasa Murthy; Howard, Thomas J.
study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality...... to be seven days. Using the monitoring system for the PRECI‐IN case, similar corrective action would have been achieved almost immediately....
Miller, Thomas Dedenroth
This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'.......This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'....
Sotnik, A. V.; Yarishev, S. N.; Korotaev, V. V.
Video data require a very large memory capacity. Optimal ratio quality / volume video encoding method is one of the most actual problem due to the urgent need to transfer large amounts of video over various networks. The technology of digital TV signal compression reduces the amount of data used for video stream representation. Video compression allows effective reduce the stream required for transmission and storage. It is important to take into account the uncertainties caused by compression of the video signal in the case of television measuring systems using. There are a lot digital compression methods. The aim of proposed work is research of video compression influence on the measurement error in television systems. Measurement error of the object parameter is the main characteristic of television measuring systems. Accuracy characterizes the difference between the measured value abd the actual parameter value. Errors caused by the optical system can be selected as a source of error in the television systems measurements. Method of the received video signal processing is also a source of error. Presence of error leads to large distortions in case of compression with constant data stream rate. Presence of errors increases the amount of data required to transmit or record an image frame in case of constant quality. The purpose of the intra-coding is reducing of the spatial redundancy within a frame (or field) of television image. This redundancy caused by the strong correlation between the elements of the image. It is possible to convert an array of image samples into a matrix of coefficients that are not correlated with each other, if one can find corresponding orthogonal transformation. It is possible to apply entropy coding to these uncorrelated coefficients and achieve a reduction in the digital stream. One can select such transformation that most of the matrix coefficients will be almost zero for typical images . Excluding these zero coefficients also
Smith, Jemma; Hand, Linda; Dowrick, Peter W.
This study examined the efficacy of video self modeling (VSM) using feedforward, to teach various goals of a picture exchange communication system (PECS). The participants were two boys with autism and one man with Down syndrome. All three participants were non-verbal with no current functional system of communication; the two children had long…
Dow, Ximeng Y; Sullivan, Shane Z; Muir, Ryan D; Simpson, Garth J
A fast (up to video rate) two-photon excited fluorescence lifetime imaging system based on interleaved digitization is demonstrated. The system is compatible with existing beam-scanning microscopes with minor electronics and software modification. Proof-of-concept demonstrations were performed using laser dyes and biological tissue.
This is a qualitative case study of two students' composing processes as they developed a documentary video about the Dominican Republic in an urban, public middle school classroom. While using a digital video editing program, the students moved across multiple media (the Web, digital video, books, and writing), drawing semiotic resources from…
Walpitagama, Milanga; Kaslin, Jan; Nugegoda, Dayanthi; Wlodkowic, Donald
The fish embryo toxicity (FET) biotest performed on embryos of zebrafish (Danio rerio) has gained significant popularity as a rapid and inexpensive alternative approach in chemical hazard and risk assessment. The FET was designed to evaluate acute toxicity on embryonic stages of fish exposed to the test chemical. The current standard, similar to most traditional methods for evaluating aquatic toxicity provides, however, little understanding of effects of environmentally relevant concentrations of chemical stressors. We postulate that significant environmental effects such as altered motor functions, physiological alterations reflected in heart rate, effects on development and reproduction can occur at sub-lethal concentrations well below than LC10. Behavioral studies can, therefore, provide a valuable integrative link between physiological and ecological effects. Despite the advantages of behavioral analysis development of behavioral toxicity, biotests is greatly hampered by the lack of dedicated laboratory automation, in particular, user-friendly and automated video microscopy systems. In this work we present a proof-of-concept development of an optical system capable of tracking embryonic vertebrates behavioral responses using automated and vastly miniaturized time-resolved video-microscopy. We have employed miniaturized CMOS cameras to perform high definition video recording and analysis of earliest vertebrate behavioral responses. The main objective was to develop a biocompatible embryo positioning structures that were suitable for high-throughput imaging as well as video capture and video analysis algorithms. This system should support the development of sub-lethal and behavioral markers for accelerated environmental monitoring.
Allin, T.; Neubert, T.; Laursen, S.; Rasmussen, I. L.; Soula, S.
In support for global ELF/VLF observations, HF measurements in France, and conjugate photometry/VLF observations in South Africa, we developed and operated a semi-automatic, remotely controlled video system for the observation of middle-atmospheric transient luminous events (TLEs). Installed at the Pic du Midi Observatory in Southern France, the system was operational during the period from July 18 to September 15, 2003. The video system, based two low-light, non-intensified CCD video cameras, was mounted on top of a motorized pan/tilt unit. The cameras and the pan/tilt unit were controlled over serial links from a local computer, and the video outputs were distributed to a pair of PCI frame grabbers in the computer. This setup allowed remote users to log in and operate the system over the internet. Event detection software provided means of recording and time-stamping single TLE video fields and thus eliminated the need for continuous human monitoring of TLE activity. The computer recorded and analyzed two parallel video streams at the full 50 Hz field rate, while uploading status images, TLE images, and system logs to a remote web server. The system detected more than 130 TLEs - mostly sprites - distributed over 9 active evenings. We have thus demonstrated the feasibility of remote agents for TLE observations, which are likely to find use in future ground-based TLE observation campaigns, or to be installed at remote sites in support for space-borne or other global TLE observation efforts.
Chan, Fai; Moon, Yiu-Sang; Chen, Jiansheng; Ma, Yiu-Kwan; Tsang, Wai-Hung; Fu, Kah-Kuen
Low resolution and un-sharp facial images are always captured from surveillance videos because of long human-camera distance and human movements. Previous works addressed this problem by using an active camera to capture close-up facial images without considering human movements and mechanical delays of the active camera. In this paper, we proposed a unified framework to capture facial images in video surveillance systems by using one static and active camera in a cooperative manner. Human faces are first located by a skin-color based real-time face detection algorithm. A stereo camera model is also employed to approximate human face location and his/her velocity with respect to the active camera. Given the mechanical delays of the active camera, the position of a target face with a given delay can be estimated using a Human-Camera Synchronization Model. By controlling the active camera with corresponding amount of pan, tilt, and zoom, a clear close-up facial image of a moving human can be captured then. We built the proposed system in an 8.4-meter indoor corridor. Results show that the proposed stereo camera configuration can locate faces with average error of 3%. In addition, it is capable of capturing facial images of a walking human clearly in first instance in 90% of the test cases.
Lee, June; Yoon, Seo Young; Lee, Chung Hyun
The purposes of the study are to investigate CHLS (Cyber Home Learning System) in online video conferencing environment in primary school level and to explore the students' responses on CHLS-VC (Cyber Home Learning System through Video Conferencing) in order to explore the possibility of using CHLS-VC as a supportive online learning system. The…
Brunner, M; Ittner, W
This paper describes VIPER, the video image-processing system Erlangen. It consists of a general purpose microcomputer, commercially available image-processing hardware modules connected directly to the computer, video input/output-modules such as a TV camera, video recorders and monitors, and a software package. The modular structure and the capabilities of this system are explained. The software is user-friendly, menu-driven and performs image acquisition, transfers, greyscale processing, arithmetics, logical operations, filtering display, colour assignment, graphics, and a couple of management functions. More than 100 image-processing functions are implemented. They are available either by typing a key or by a simple call to the function-subroutine library in application programs. Examples are supplied in the area of biomedical research, e.g. in in-vivo microscopy.
Full Text Available About the video image processing's vehicle detection and counting system research, which has video vehicle detection, vehicle targets' image processing, and vehicle counting function. Vehicle detection is the use of inter-frame difference method and vehicle shadow segmentation techniques for vehicle testing. Image processing functions is the use of color image gray processing, image segmentation, mathematical morphology analysis and image fills, etc. on target detection to be processed, and then the target vehicle extraction. Counting function is to count the detected vehicle. The system is the use of inter-frame video difference method to detect vehicle and the use of the method of adding frame to vehicle and boundary comparison method to complete the counting function, with high recognition rate, fast, and easy operation. The purpose of this paper is to enhance traffic management modernization and automation levels. According to this study, it can provide a reference for the future development of related applications.
Full Text Available This essay examines how tensions between work and play for video game developers shape the worlds they create. The worlds of game developers, whose daily activity is linked to larger systems of experimentation and technoscientific practice, provide insights that transcend video game development work. The essay draws on ethnographic material from over 3 years of fieldwork with video game developers in the United States and India. It develops the notion of creative collaborative practice based on work in the fields of science and technology studies, game studies, and media studies. The importance of, the desire for, or the drive to understand underlying systems and structures has become fundamental to creative collaborative practice. I argue that the daily activity of game development embodies skills fundamental to creative collaborative practice and that these capabilities represent fundamental aspects of critical thought. Simultaneously, numerous interests have begun to intervene in ways that endanger these foundations of creative collaborative practice.
4K video is a new format. At 3840 × 2160 resolution, it has 4 times the resolution of standard 1080 high definition (HD) video. Magnification can be done without loss of resolution. This study uses 4K video for video-stroboscopy. Forty-six patients were examined by conventional video-stroboscopy (digital 3 chip CCD) and compared with 4K video-stroboscopy. The video was recorded on a Blackmagic 4K cinema production camera in CinemaDNG RAW format. The video was played back on a 4K monitor and compared to standard video. Pathological conditions included: polyps, scar, cysts, cancer, sulcus, and nodules. Successful 4K video recordings were achieved in all subjects using a 70° rigid endoscope. The camera system is bulky. The examination is performed similarly to standard video-stroboscopy. Playback requires a 4K monitor. As expected, the images were far clearer in detail than standard video. Stroboscopy video using the 4K camera was consistently able to show more detail. Two patients had diagnosis change after 4K viewing. 4K video is an exciting new technology that can be applied to laryngoscopy. It allows for cinematic 4K quality recordings. Both continuous and stroboscopic light can be used for visualization. Its clinical utility is feasible, but usefulness must be proven. © The Author(s) 2015.
A. L. Oleinik
Full Text Available Subject of Research. The paper deals with the problem of multiple face tracking in a video stream. The primary application of the implemented tracking system is the automatic video surveillance. The particular operating conditions of surveillance cameras are taken into account in order to increase the efficiency of the system in comparison to existing general-purpose analogs. Method. The developed system is comprised of two subsystems: detector and tracker. The tracking subsystem does not depend on the detector, and thus various face detection methods can be used. Furthermore, only a small portion of frames is processed by the detector in this structure, substantially improving the operation rate. The tracking algorithm is based on BRIEF binary descriptors that are computed very efficiently on modern processor architectures. Main Results. The system is implemented in C++ and the experiments on the processing rate and quality evaluation are carried out. MOTA and MOTP metrics are used for tracking quality measurement. The experiments demonstrated the four-fold processing rate gain in comparison to the baseline implementation that processes every video frame with the detector. The tracking quality is on the adequate level when compared to the baseline. Practical Relevance. The developed system can be used with various face detectors (including slow ones to create a fully functional high-speed multiple face tracking solution. The algorithm is easy to implement and optimize, so it may be applied not only in full-scale video surveillance systems, but also in embedded solutions integrated directly into cameras.
Sehairi, Kamal; Chouireb, Fatima; Meunier, Jean
The objective of this study is to compare several change detection methods for a monostatic camera and identify the best method for different complex environments and backgrounds in indoor and outdoor scenes. To this end, we used the CDnet video dataset as a benchmark that consists of many challenging problems, ranging from basic simple scenes to complex scenes affected by bad weather and dynamic backgrounds. Twelve change detection methods, ranging from simple temporal differencing to more sophisticated methods, were tested and several performance metrics were used to precisely evaluate the results. Because most of the considered methods have not previously been evaluated on this recent large scale dataset, this work compares these methods to fill a lack in the literature, and thus this evaluation joins as complementary compared with the previous comparative evaluations. Our experimental results show that there is no perfect method for all challenging cases; each method performs well in certain cases and fails in others. However, this study enables the user to identify the most suitable method for his or her needs.
Geradts, Zeno J.; Merlijn, Menno; de Groot, Gert; Bijhold, Jurrien
The gait parameters of eleven subjects were evaluated to provide data for recognition purposes of subjects. Video images of these subjects were acquired in frontal, transversal, and sagittal (a plane parallel to the median of the body) view. The subjects walked by at their usual walking speed. The measured parameters were hip, knee and ankle joint angle and their time averaged values, thigh, foot and trunk angle, step length and width, cycle time and walking speed. Correlation coefficients within and between subjects for the hip, knee and ankle rotation pattern in the sagittal aspect and for the trunk rotation pattern in the transversal aspect were almost similar. (were similar or were almost identical) This implies that the intra and inter individual variance were equal. Therefore, these gait parameters could not distinguish between subjects. A simple ANOVA with a follow-up test was used to detect significant differences for the mean hip, knee and ankle joint angle, thigh angle, step length, step width, walking speed, cycle time and foot angle. The number of significant differences between subjects defined the usefulness of the gait parameter. The parameter with the most significant difference between subjects was the foot angle (64 % - 73 % of the maximal attainable significant differences), followed by the time average hip joint angle (58 %) and the step length (45 %). The other parameters scored less than 25 %, which is poor for recognition purposes. The use of gait for identification purposes it not yet possible based on this research.
Azer, Samy A; Algrain, Hala A; AlKhelaif, Rana A; AlEshaiwi, Sarah M
A number of studies have evaluated the educational contents of videos on YouTube. However, little analysis has been done on videos about physical examination. This study aimed to analyze YouTube videos about physical examination of the cardiovascular and respiratory systems. It was hypothesized that the educational standards of videos on YouTube would vary significantly. During the period from November 2, 2011 to December 2, 2011, YouTube was searched by three assessors for videos covering the clinical examination of the cardiovascular and respiratory systems. For each video, the following information was collected: title, authors, duration, number of viewers, and total number of days on YouTube. Using criteria comprising content, technical authority, and pedagogy parameters, videos were rated independently by three assessors and grouped into educationally useful and non-useful videos. A total of 1920 videos were screened. Only relevant videos covering the examination of adults in the English language were identified (n=56). Of these, 20 were found to be relevant to cardiovascular examinations and 36 to respiratory examinations. Further analysis revealed that 9 provided useful information on cardiovascular examinations and 7 on respiratory examinations: scoring mean 14.9 (SD 0.33) and mean 15.0 (SD 0.00), respectively. The other videos, 11 covering cardiovascular and 29 on respiratory examinations, were not useful educationally, scoring mean 11.1 (SD 1.08) and mean 11.2 (SD 1.29), respectively. The differences between these two categories were significant (P.86. A small number of videos about physical examination of the cardiovascular and respiratory systems were identified as educationally useful; these videos can be used by medical students for independent learning and by clinical teachers as learning resources. The scoring system utilized by this study is simple, easy to apply, and could be used by other researchers on similar topics.
Yang, Jian; Xie, Xiaofang; Wang, Yan
Based on the AHRS (Attitude and Heading Reference System) and PTZ (Pan/Tilt/Zoom) camera, we designed a video monitoring and tracking system. The overall structure of the system and the software design are given. The key technologies such as serial port communication and head attitude tracking are introduced, and the codes of the key part are given.
National Oceanic and Atmospheric Administration, Department of Commerce — Collection of annual data on processed seafood products. The Division provides authoritative advice, coordination and guidance on matters related to the collection,...
We revisit the notion of a product of a normal subsystem with a p-subgroup as defined by Aschbacher (2011) [Asc11, Chapter 8]. In particular, we give a previously unknown, more transparent construction....
Bulan, Orhan; Loce, Robert P.; Wu, Wencheng; Wang, YaoRong; Bernal, Edgar A.; Fan, Zhigang
Urban parking management is receiving significant attention due to its potential to reduce traffic congestion, fuel consumption, and emissions. Real-time parking occupancy detection is a critical component of on-street parking management systems, where occupancy information is relayed to drivers via smart phone apps, radio, Internet, on-road signs, or global positioning system auxiliary signals. Video-based parking occupancy detection systems can provide a cost-effective solution to the sensing task while providing additional functionality for traffic law enforcement and surveillance. We present a video-based on-street parking occupancy detection system that can operate in real time. Our system accounts for the inherent challenges that exist in on-street parking settings, including illumination changes, rain, shadows, occlusions, and camera motion. Our method utilizes several components from video processing and computer vision for motion detection, background subtraction, and vehicle detection. We also present three traffic law enforcement applications: parking angle violation detection, parking boundary violation detection, and exclusion zone violation detection, which can be integrated into the parking occupancy cameras as a value-added option. Our experimental results show that the proposed parking occupancy detection method performs in real-time at 5 frames/s and achieves better than 90% detection accuracy across several days of videos captured in a busy street block under various weather conditions such as sunny, cloudy, and rainy, among others.
Ignacio, Joselito; Center for Homeland Defense and Security Naval Postgraduate School
This proposed system process aims to improve subway safety through better enabling the rapid detection and response to a chemical release in a subway system. The process is designed to be location-independent and generalized to most subway systems despite each system's unique characteristics.
Hua, My; Yip, Henry; Talbot, Prue
The objective was to analyse and compare puff and exhalation duration for individuals using electronic nicotine delivery systems (ENDS) and conventional cigarettes in YouTube videos. Video data from YouTube videos were analysed to quantify puff duration and exhalation duration during use of conventional tobacco-containing cigarettes and ENDS. For ENDS, comparisons were also made between 'advertisers' and 'non-advertisers', genders, brands of ENDS, and models of ENDS within one brand. Puff duration (mean =2.4 s) for conventional smokers in YouTube videos (N=9) agreed well with prior publications. Puff duration was significantly longer for ENDS users (mean =4.3 s) (N = 64) than for conventional cigarette users, and puff duration varied significantly among ENDS brands. For ENDS users, puff duration and exhalation duration were not significantly affected by 'advertiser' status, gender or variation in models within a brand. Men outnumbered women by about 5:1, and most users were between 19 and 35 years of age. YouTube videos provide a valuable resource for studying ENDS usage. Longer puff duration may help ENDS users compensate for the apparently poor delivery of nicotine from ENDS. As with conventional cigarette smoking, ENDS users showed a large variation in puff duration (range =1.9-8.3 s). ENDS puff duration should be considered when designing laboratory and clinical trials and in developing a standard protocol for evaluating ENDS performance.
Cheah Wai Shiang
Full Text Available Agent-oriented methodology (AOM is a comprehensive and unified agent methodology for agent-oriented software development. Although AOM is claimed to be able to cope with a complex system development, it is still not yet determined up to what extent this may be true. Therefore, it is vital to conduct an investigation to validate this methodology. This paper presents the adoption of AOM in developing an agent-oriented video surveillance system (VSS. An intruder handling scenario is designed and implemented through AOM. AOM provides an alternative method to engineer a distributed security system in a systematic manner. It presents the security system at a holistic view; provides a better conceptualization of agent-oriented security system and supports rapid prototyping as well as simulation of video surveillance system.
Burner, A. W.; Rummler, D. R.; Goad, W. K.
A system consisting of a single charge coupled device (CCD) video camera, computer controlled video digitizer, and software to automate the measurement was developed to measure the location of bullet holes in targets at the International Shooters Development Fund (ISDF)/NASA Ballistics Tunnel. The camera/digitizer system is a crucial component of a highly instrumented indoor 50 meter rifle range which is being constructed to support development of wind resistant, ultra match ammunition. The system was designed to take data rapidly (10 sec between shoots) and automatically with little operator intervention. The system description, measurement concept, and procedure are presented along with laboratory tests of repeatability and bias error. The long term (1 hour) repeatability of the system was found to be 4 microns (one standard deviation) at the target and the bias error was found to be less than 50 microns. An analysis of potential errors and a technique for calibration of the system are presented.
... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Video Game Systems and Controllers; Investigations: Terminations, Modifications and Rulings AGENCY: U.S. International Trade Commission. ACTION: Notice. Section 337 of the Tariff Act of 1930...
... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Video Game Systems and Wireless Controllers and Components Thereof, Commission Determination Finding No Violation of the Tariff Act of 1930 AGENCY: U.S. International Trade Commission. ACTION...
Horn, Eva; And Others
Three nonvocal students (ages 5-8) with severe physical handicaps were trained in scan and selection responses (similar to responses needed for operating augmentative communication systems) using a microcomputer-operated video-game format. Results indicated that all three children showed substantial increases in the number of correct responses and…
Pope, Alan T.; Bogart, Edward H.
Describes the Extended Attention Span Training (EAST) system for modifying attention deficits, which takes the concept of biofeedback one step further by making a video game more difficult as the player's brain waves indicate that attention is waning. Notes contributions of this technology to neuropsychology and neurology, where the emphasis is on…
Hung, Chin-Chang; Tsao, Shih-Chieh; Huang, Kuo-Hao; Jang, Jia-Pu; Chang, Hsu-Kuang; Dobbs, Fred C.
The turbid, low-light waters characteristic of aquaculture ponds have made it difficult or impossible for previous video cameras to provide clear imagery of the ponds’ benthic habitat. We developed a highly sensitive, underwater video system (UVS) for this particular application and tested it in shrimp ponds having turbidities typical of those in southern Taiwan. The system’s high-quality video stream and images, together with its camera capacity (up to nine cameras), permit in situ observations of shrimp feeding behavior, shrimp size and internal anatomy, and organic matter residues on pond sediments. The UVS can operate continuously and be focused remotely, a convenience to shrimp farmers. The observations possible with the UVS provide aquaculturists with information critical to provision of feed with minimal waste; determining whether the accumulation of organic-matter residues dictates exchange of pond water; and management decisions concerning shrimp health.
The author demonstrates a new system useful for reflective learning. Our new system offers an environment that one can use handwriting tablet devices to bookmark symbolic and descriptive feedbacks into simultaneously recorded videos in the environment. If one uses video recording and feedback check sheets in reflective learning sessions, one can…
... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Video Game Systems and Wireless Controllers and Components Thereof; Notice of Request for... limited exclusion order and a cease and desist order against certain video game systems and wireless...
AKINCI, Gökay; Polat, Ediz; Koçak, Orhan Murat
Eye pupil detection systems have become increasingly popular in image processing and computer vision applications in medical systems. In this study, a video-based eye pupil detection system is developed for diagnosing bipolar disorder. Bipolar disorder is a condition in which people experience changes in cognitive processes and abilities, including reduced attentional and executive capabilities and impaired memory. In order to detect these abnormal behaviors, a number of neuropsychologi...
Cihak, David; Fahrenkrog, Cynthia; Ayres, Kevin M.; Smith, Catherine
This study evaluated the efficacy of video modeling delivered via a handheld device (video iPod) and the use of the system of least prompts to assist elementary-age students with transitioning between locations and activities within the school. Four students with autism learned to manipulate a handheld device to watch video models. An ABAB…
Eriksen, Kaare Riise
The article discusses whether the principle of "extended design" is a new phenomenon, and presents and discusses the systems design project "Det Grønne Møbel".......The article discusses whether the principle of "extended design" is a new phenomenon, and presents and discusses the systems design project "Det Grønne Møbel"....
Full Text Available The most significant transformations that globalization produces occur in production. Since the '60s, a new division of labor has made its presence felt in the world, arising from the "de-industrialization" of the developed and transfer production capacity of resource-intensive industries and pollutants from these countries to the developing world. "Dislocation" industry had the interim foreign direct investment made in the new industrialized countries, the latter becoming, in turn, sources of direct foreign investment, taking its capital in other countries in developing handsets. Currently, FDI destination is no longer a priority in developing countries, yet they are increasingly leaning towards the developed countries, due to the attractiveness offered by their economies.
Chan, Yi-Tung; Wang, Shuenn-Jyi; Tsai, Chung-Hsien
Public safety is a matter of national security and people's livelihoods. In recent years, intelligent video-surveillance systems have become important active-protection systems. A surveillance system that provides early detection and threat assessment could protect people from crowd-related disasters and ensure public safety. Image processing is commonly used to extract features, e.g., people, from a surveillance video. However, little research has been conducted on the relationship between foreground detection and feature extraction. Most current video-surveillance research has been developed for restricted environments, in which the extracted features are limited by having information from a single foreground; they do not effectively represent the diversity of crowd behavior. This paper presents a general framework based on extracting ensemble features from the foreground of a surveillance video to analyze a crowd. The proposed method can flexibly integrate different foreground-detection technologies to adapt to various monitored environments. Furthermore, the extractable representative features depend on the heterogeneous foreground data. Finally, a classification algorithm is applied to these features to automatically model crowd behavior and distinguish an abnormal event from normal patterns. The experimental results demonstrate that the proposed method's performance is both comparable to that of state-of-the-art methods and satisfies the requirements of real-time applications.
Thorsdatter Orvedal Aase, Anne Lene
Full Text Available In this study we used a portable event-triggered video surveillance system for monitoring flower-visiting bumblebees. The system consist of mini digital recorder (mini-DVR with a video motion detection (VMD sensor which detects changes in the image captured by the camera, the intruder triggers the recording immediately. The sensitivity and the detection area are adjustable, which may prevent unwanted recordings. To our best knowledge this is the first study using VMD sensor to monitor flower-visiting insects. Observation of flower-visiting insects has traditionally been monitored by direct observations, which is time demanding, or by continuous video monitoring, which demands a great effort in reviewing the material. A total of 98.5 monitoring hours were conducted. For the mini-DVR with VMD, a total of 35 min were spent reviewing the recordings to locate 75 pollinators, which means ca. 0.35 sec reviewing per monitoring hr. Most pollinators in the order Hymenoptera were identified to species or group level, some were only classified to family (Apidae or genus (Bombus. The use of the video monitoring system described in the present paper could result in a more efficient data sampling and reveal new knowledge to pollination ecology (e.g. species identification and pollinating behaviour.
Bräger, S.; Chong, A.; Dawson, S.; Slooten, E.; Würsig, B.
One reason for the paucity of knowledge of dolphin social structure is the difficulty of measuring individual dolphins. In Hector's dolphins, Cephalorhynchus hectori, total body length is a function of age, and sex can be determined by individual colouration pattern. We developed a novel system combining stereo-photogrammetry and underwater-video to record dolphin group composition. The system consists of two downward-looking single-lens-reflex (SLR) cameras and a Hi8 video camera in an underwater housing mounted on a small boat. Bow-riding Hector's dolphins were photographed and video-taped at close range in coastal waters around the South Island of New Zealand. Three-dimensional, stereoscopic measurements of the distance between the blowhole and the anterior margin of the dorsal fin (BH-DF) were calibrated by a suspended frame with reference points. Growth functions derived from measurements of 53 dead Hector's dolphins (29 female : 24 male) provided the necessary reference data. For the analysis, the measurements were synchronised with corresponding underwater-video of the genital area. A total of 27 successful measurements (8 with corresponding sex) were obtained, showing how this new system promises to be potentially useful for cetacean studies.
Hsu, Chia-chun A.; Ling, Jim; Li, Qing; Kuo, C.-C. J.
The distributed Multiplayer Online Game (MOG) system is complex since it involves technologies in computer graphics, multimedia, artificial intelligence, computer networking, embedded systems, etc. Due to the large scope of this problem, the design of MOG systems has not yet been widely addressed in the literatures. In this paper, we review and analyze the current MOG system architecture followed by evaluation. Furthermore, we propose a clustered-server architecture to provide a scalable solution together with the region oriented allocation strategy. Two key issues, i.e. interesting management and synchronization, are discussed in depth. Some preliminary ideas to deal with the identified problems are described.
Nasim, Aashir; Blank, Melissa D; Cobb, Caroline O; Berry, Brittany M; Kennedy, May G; Eissenberg, Thomas
Cigar smoking is increasingly common among adolescents who perceive cigars as less harmful than cigarettes. This perception of reduced harm is especially true for cigars that are user-modified by removing the tobacco binder through a process called 'freaking'. Little is known about 'freaking' and this multi-study, mixed-methods analysis sought to understand better the rationale and prevailing beliefs about this smoking practice using YouTube videos. In Study 1, we conducted a descriptive content analysis on the characteristics of 26 randomly sampled cigar product modification (CPM) videos posted during 2006-10. In Study 2, a thematic analysis was performed on the transcripts of commentary associated with each video to characterize viewers' comments about video content. Study 1 results revealed that 90% of videos illustrated a four-step CPM technique: 'Loosening the tobacco'; 'Dumping the tobacco'; 'Removing the cigar binder' and 'Repacking the tobacco'. Four themes related to the purpose of CPM were also derived from video content: 'Easier to smoke' (54%), 'Beliefs in reduction of health risks' (31%), 'Changing the burn rate' (15%) and 'Taste enhancement' (12%). Study 2 results concerning the content characteristics of video comments were categorized into three themes: 'Disseminating information/answering questions' (81%), 'Seeking advice/asking questions' (69%) and 'Learning cigar modification techniques' (35%). Favorable comments were more common (81%) compared to unfavorable (58%) and comment content suggested low-risk perceptions and poor understanding of smoking harms. These findings highlight a novel means for youth to access information concerning CPM that may have important implications for tobacco control policy and prevention.
Seo, Young-Ho; Lee, Yoon-Hyuk; Koo, Ja-Myung; Kim, Woo-Youl; Yoo, Ji-Sang; Kim, Dong-Wook
We propose a new system that can generate digital holograms using natural color information. The system consists of a camera system for capturing images (object points) and software (S/W) for various image processing. The camera system uses a vertical rig, which is equipped with two depth and RGB cameras and a cold mirror, which has different reflectances according to wavelength for obtaining images with the same viewpoint. The S/W is composed of the engines for processing the captured images and executing computer-generated hologram for generating digital holograms using general-purpose graphics processing units. Each algorithm was implemented using C/C++ and CUDA languages, and all engines in the form of library were integrated in LabView environment. The proposed system can generate about 10 digital holographic frames per second using about 6 K object points.
Caruso, Giandomenico; Re, Guido Maria
The product development process, of industrial products, includes a phase dedicated to the design review that is a crucial phase where various experts cooperate in selecting the optimal product shape. Although computer graphics allows us to create very realistic virtual representations of the products, it is not uncommon that designers decide to build physical mock-ups of their newly conceived products because they need to physically interact with the prototype and also to evaluate the product within a plurality of real contexts. This paper describes the hardware and software development of our Augmented Reality design review system that allows to overcome some issues related to the 3D visualization and to the interaction with the virtual objects. Our system is composed by a Video See Through Head Mounted Display, which allows to improve the 3D visualization by controlling the convergence of the video cameras automatically, and a wireless control system, which allows us to create some metaphors to interact with the virtual objects. During the development of the system, in order to define and tune the algorithms, we have performed some testing sessions. Then, we have performed further tests in order to verify the effectiveness of the system and to collect additional data and comments about usability and ergonomic aspects.
Endo, Chiaki; Sakurada, A; Kondo, T
Recently, endoscopic procedures including surgery, intervention, and examination have been widely performed. Medical practitioners are required to record the procedures precisely in order to check the procedures retrospectively and to get the legally reliable record. Medical Forensic System made by KS Olympus Japan offers 2 kinds of movie and patient's data, such as heart rate, blood pressure, and Spo, which are simultaneously recorded. We installed this system into the bronchoscopy room and have experienced its benefit. Under this system, we can get bronchoscopic image, bronchoscopy room view, and patient's data simultaneously. We can check the quality of the bronchoscopic procedures retrospectively, which is useful for bronchoscopy staff training. Medical Forensic System should be installed in any kind of endoscopic procedures.
Jihwan Park; Youngsun Kong; Yunyoung Nam
In order to remain in focus during head movements, vestibular-ocular reflex causes eyes to move in the opposite direction to head movement. Disorders of vestibular system decrease vision, causing abnormal nystagmus and dizziness. To diagnose abnormal nystagmus, various studies have been reported including the use of rotating chair tests and videonystagmography. However, these tests are unsuitable for home use due to their high costs. Thus, a low-cost video-oculography system is necessary to obtain clinical features at home. In this paper, we present a low-cost video-oculography system using an infrared camera and Raspberry Pi board for tracking the pupils and evaluating a vestibular system. Horizontal eye movement is derived from video data obtained from an infrared camera and infrared light-emitting diodes, and the velocity of head rotation is obtained from a gyroscope sensor. Each pupil was extracted using a morphology operation and a contour detection method. Rotatory chair tests were conducted with our developed device. To evaluate our system, gain, asymmetry, and phase were measured and compared with System 2000. The average IQR errors of gain, phase and asymmetry were 0.81, 2.74 and 17.35, respectively. We showed that our system is able to measure clinical features.
Roh, Mootaek; McHugh, Thomas J; Lee, Kyungmin
To investigate the relationship between neural function and behavior it is necessary to record neuronal activity in the brains of freely behaving animals, a technique that typically involves tethering to a data acquisition system. Optimally this approach allows animals to behave without any interference of movement or task performance. Currently many laboratories in the cognitive and behavioral neuroscience fields employ commercial motorized commutator systems using torque sensors to detect tether movement induced by the trajectory behaviors of animals. In this study we describe a novel motorized commutator system which is automatically controlled by video tracking. To obtain accurate head direction data two light emitting diodes were used and video image noise was minimized by physical light source manipulation. The system calculates the rotation of the animal across a single trial by processing head direction data and the software, which calibrates the motor rotation angle, subsequently generates voltage pulses to actively untwist the tether. This system successfully provides a tether twist-free environment for animals performing behavioral tasks and simultaneous neural activity recording. To the best of our knowledge, it is the first to utilize video tracking generated head direction to detect tether twisting and compensate with a motorized commutator system. Our automatic commutator control system promises an affordable and accessible method to improve behavioral neurophysiology experiments, particularly in mice.
Full Text Available This paper presents an efficient video filtering scheme and its implementation in a field-programmable logic device (FPLD. Since the proposed nonlinear, spatiotemporal filtering scheme is based on order statistics, its efficient implementation benefits from a bit-serial realization. The utilization of both the spatial and temporal correlation characteristics of the processed video significantly increases the computational demands on this solution, and thus, implementation becomes a significant challenge. Simulation studies reported in this paper indicate that the proposed pipelined bit-serial FPLD filtering solution can achieve speeds of up to 97.6 Mpixels/s and consumes 1700 to 2700 logic cells for the speed-optimized and area-optimized versions, respectively. Thus, the filter area represents only 6.6 to 10.5% of the Altera STRATIX EP1S25 device available on the Altera Stratix DSP evaluation board, which has been used to implement a prototype of the entire real-time vision system. As such, the proposed adaptive video filtering scheme is both practical and attractive for real-time machine vision and surveillance systems as well as conventional video and multimedia applications.
M.Sc. (Computer Science) A video conference is an interactive meeting between two or more locations, facilitated by simultaneous two-way video and audio transmissions. People in a video conference, also known as participants, join these video conferences for business and recreational purposes. In a typical video conference, we should properly identify and authenticate every participant in the video conference, if information discussed during the video conference is confidential. This preve...
Ziemke, Robert A.
The objective of the High Resolution, High Frame Rate Video Technology (HHVT) development effort is to provide technology advancements to remove constraints on the amount of high speed, detailed optical data recorded and transmitted for microgravity science and application experiments. These advancements will enable the development of video systems capable of high resolution, high frame rate video data recording, processing, and transmission. Techniques such as multichannel image scan, video parameter tradeoff, and the use of dual recording media were identified as methods of making the most efficient use of the near-term technology.
A. V. Tokarev
Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi
Macias, Elsa; Lloret, Jaime; Suarez, Alvaro; Garcia, Miguel
Current mobile phones come with several sensors and powerful video cameras. These video cameras can be used to capture good quality scenes, which can be complemented with the information gathered by the sensors also embedded in the phones. For example, the surroundings of a beach recorded by the camera of the mobile phone, jointly with the temperature of the site can let users know via the Internet if the weather is nice enough to swim. In this paper, we present a system that tags the video frames of the video recorded from mobile phones with the data collected by the embedded sensors. The tagged video is uploaded to a video server, which is placed on the Internet and is accessible by any user. The proposed system uses a semantic approach with the stored information in order to make easy and efficient video searches. Our experimental results show that it is possible to tag video frames in real time and send the tagged video to the server with very low packet delay variations. As far as we know there is not any other application developed as the one presented in this paper.
Macias, Elsa; Lloret, Jaime; Suarez, Alvaro; Garcia, Miguel
Current mobile phones come with several sensors and powerful video cameras. These video cameras can be used to capture good quality scenes, which can be complemented with the information gathered by the sensors also embedded in the phones. For example, the surroundings of a beach recorded by the camera of the mobile phone, jointly with the temperature of the site can let users know via the Internet if the weather is nice enough to swim. In this paper, we present a system that tags the video frames of the video recorded from mobile phones with the data collected by the embedded sensors. The tagged video is uploaded to a video server, which is placed on the Internet and is accessible by any user. The proposed system uses a semantic approach with the stored information in order to make easy and efficient video searches. Our experimental results show that it is possible to tag video frames in real time and send the tagged video to the server with very low packet delay variations. As far as we know there is not any other application developed as the one presented in this paper. PMID:22438753
Full Text Available Current mobile phones come with several sensors and powerful video cameras. These video cameras can be used to capture good quality scenes, which can be complemented with the information gathered by the sensors also embedded in the phones. For example, the surroundings of a beach recorded by the camera of the mobile phone, jointly with the temperature of the site can let users know via the Internet if the weather is nice enough to swim. In this paper, we present a system that tags the video frames of the video recorded from mobile phones with the data collected by the embedded sensors. The tagged video is uploaded to a video server, which is placed on the Internet and is accessible by any user. The proposed system uses a semantic approach with the stored information in order to make easy and efficient video searches. Our experimental results show that it is possible to tag video frames in real time and send the tagged video to the server with very low packet delay variations. As far as we know there is not any other application developed as the one presented in this paper.
Zhiwei, Jia; Guozheng, Yan; Bingquan, Zhu
Wireless power transmission is considered a practical way of overcoming the power shortage of wireless capsule endoscopy (VCE). However, most patients cannot tolerate the long hours of lying in a fixed transmitting coil during diagnosis. To develop a portable wireless power transmission system for VCE, a compact transmitting coil and a portable inverter circuit driven by rechargeable batteries are proposed. The couple coils, optimized considering the stability and safety conditions, are 28 turns of transmitting coil and six strands of receiving coil. The driven circuit is designed according to the portable principle. Experiments show that the integrated system could continuously supply power to a dual-head VCE for more than 8 h at a frame rate of 30 frames per second with resolution of 320 × 240. The portable VCE exhibits potential for clinical applications, but requires further improvement and tests.
Dillavou, Marcus W.; Shum, Phillip Corey; Guthrie, Baron L.; Shenai, Mahesh B.; Deaton, Drew Steven; May, Matthew Benton
Provided herein are methods and systems for image registration from multiple sources. A method for image registration includes rendering a common field of interest that reflects a presence of a plurality of elements, wherein at least one of the elements is a remote element located remotely from another of the elements and updating the common field of interest such that the presence of the at least one of the elements is registered relative to another of the elements.
Pedraza-Acosta, Isabel; Pilkington, Alan; Barnes, David
Purpose: This paper presents a combined multi-phase supplier selection model. The process repeatedly revisits the criteria and sourcing decision as the development process continues. This enables a structured adoption of product and production system innovation from strategic suppliers, where...... strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements...... of strategic suppliers which seeks to identify the optimum technological and process decisions as well as the traditional supplier sourcing choice. These areas have not been combined before and generate a valuable approach for firms to adopt as well as for researchers to extend our understanding of a highly...
Moshirnia, Andrew; Israel, Maya
Despite the increasing popularity of many commercial video games, this popularity is not shared by educational video games. Modified video games, however, can bridge the gap in quality between commercial and education video games by embedding educational content into popular commercial video games. This study examined how different information…
Cai, Lin; Deng, Nianchun; Xiao, Zexin
The cables in anchorage zone of cable-stayed bridge are hidden within the embedded pipe, which leads to the difficulty for detecting the damage of the cables with visual inspection. We have built a detection device based on high-resolution video capture, realized the distance observing of invisible segment of stay cable and damage detection of outer surface of cable in the small volume. The system mainly consists of optical stents and precision mechanical support device, optical imaging system, lighting source, drived motor control and IP camera video capture system. The principal innovations of the device are ⑴A set of telescope objectives with three different focal lengths are designed and used in different distances of the monitors by means of converter. ⑵Lens system is far separated with lighting system, so that the imaging optical path could effectively avoid the harsh environment which would be in the invisible part of cables. The practice shows that the device not only can collect the clear surveillance video images of outer surface of cable effectively, but also has a broad application prospect in security warning of prestressed structures.
Potel, Michael J.; MacKay, Steven A.; Sayre, Richard E.
Extracting quantitative information from movie film and video recordings has always been a difficult process. The Galatea motion analysis system represents an application of some powerful interactive computer graphics capabilities to this problem. A minicomputer is interfaced to a stop-motion projector, a data tablet, and real-time display equipment. An analyst views a film and uses the data tablet to track a moving position of interest. Simultaneously, a moving point is displayed in an animated computer graphics image that is synchronized with the film as it runs. Using a projection CRT and a series of mirrors, this image is superimposed on the film image on a large front screen. Thus, the graphics point lies on top of the point of interest in the film and moves with it at cine rates. All previously entered points can be displayed simultaneously in this way, which is extremely useful in checking the accuracy of the entries and in avoiding omission and duplication of points. Furthermore, the moving points can be connected into moving stick figures, so that such representations can be transcribed directly from film. There are many other tools in the system for entering outlines, measuring time intervals, and the like. The system is equivalent to "dynamic tracing paper" because it is used as though it were tracing paper that can keep up with running movie film. We have applied this system to a variety of problems in cell biology, cardiology, biomechanics, and anatomy. We have also extended the system using photogrammetric techniques to support entry of three-dimensional moving points from two (or more) films taken simultaneously from different perspective views. We are also presently constructing a second, lower-cost, microcomputer-based system for motion analysis in video, using digital graphics and video mixing to achieve the graphics overlay for any composite video source image.
Full Text Available Video content has increased much on the Internet during last years. In spite of the efforts of different organizations and governments to increase the accessibility of websites, most multimedia content on the Internet is not accessible. This paper describes a system that contributes to make multimedia content more accessible on the Web, by automatically translating subtitles in oral language to SignWriting, a way of writing Sign Language. This system extends the functionality of a general web platform that can provide accessible web content for different needs. This platform has a core component that automatically converts any web page to a web page compliant with level AA of WAI guidelines. Around this core component, different adapters complete the conversion according to the needs of specific users. One adapter is the Deaf People Accessibility Adapter, which provides accessible web content for the Deaf, based on SignWritting. Functionality of this adapter has been extended with the video subtitle translator system. A first prototype of this system has been tested through different methods including usability and accessibility tests and results show that this tool can enhance the accessibility of video content available on the Web for Deaf people.
Allen, A. J.; Terry, J. L.; Garnier, D.; Stillerman, J. A.; Wurden, G. A.
A new system for routine digitization of video images is presently operating on the Alcator C-Mod tokamak. The PC-based system features high resolution video capture, storage, and retrieval. The captured images are stored temporarily on the PC, but are eventually written to CD. Video is captured from one of five filtered RS-170 CCD cameras at 30 frames per second (fps) with 640×480 pixel resolution. In addition, the system can digitize the output from a filtered Kodak Ektapro EM Digital Camera which captures images at 1000 fps with 239×192 resolution. Present views of this set of cameras include a wide angle and a tangential view of the plasma, two high resolution views of gas puff capillaries embedded in the plasma facing components, and a view of ablating, high speed Li pellets. The system is being used to study (1) the structure and location of visible emissions (including MARFEs) from the main plasma and divertor, (2) asymmetries in gas puff plumes due to flows in the scrape-off layer (SOL), and (3) the tilt and cigar-shaped spatial structure of the Li pellet ablation cloud.
Han, Xiaoguang; Fu, Hongbo; Zheng, Hanlin; Liu, Ligang; Wang, Jue
Stop-motion is a well-established animation technique but is often laborious and requires craft skills. A new video-based system can animate the vast majority of everyday objects in stop-motion style, more flexibly and intuitively. Animators can perform and capture motions continuously instead of breaking them into increments and shooting one still picture per increment. More important, the system permits direct hand manipulation without resorting to rigs, achieving more natural object control for beginners. The system's key component is two-phase keyframe-based capturing and processing, assisted by computer vision techniques. With this system, even amateurs can generate high-quality stop-motion animations.
Full Text Available This paper proposes a camera road sign system of the early warning, which can help to avoid from vehicle collision with the wild animals. The system consists of camera modules placed down the particularly chosen route and the intelligent road signs. The camera module consists of the camera device and the computing unit. The video stream is captured from video camera using computing unit. Then the algorithms of object detection are deployed. Afterwards, the machine learning algorithms will be used to classify the moving objects. If the moving object is classified as animal and this animal can be dangerous for safety of the vehicle, warning will be displayed on the intelligent road sings.
Martin, Benjamin M.; Irwin, Elise R.
We designed a digital underwater video camera system to monitor nesting centrarchid behavior in the Tallapoosa River, Alabama, 20 km below a peaking hydropower dam with a highly variable flow regime. Major components of the system included a digital video recorder, multiple underwater cameras, and specially fabricated substrate stakes. The innovative design of the substrate stakes allowed us to effectively observe nesting redbreast sunfish Lepomis auritus in a highly regulated river. Substrate stakes, which were constructed for the specific substratum complex (i.e., sand, gravel, and cobble) identified at our study site, were able to withstand a discharge level of approximately 300 m3/s and allowed us to simultaneously record 10 active nests before and during water releases from the dam. We believe our technique will be valuable for other researchers that work in regulated rivers to quantify behavior of aquatic fauna in response to a discharge disturbance.
...". Moreover, much of the research and literature about the still young history of video games has been conducted following a cult of celebrity mostly concerned with highlighting American and Japanese perspectives...
R. Dulaney, D.; Hopfensperger, M.; Malinowski, R.; Hauptman, J.; Kruger, J M
Background Urinary disorders in cats often require subjective caregiver quantification of clinical signs to establish a diagnosis and monitor therapeutic outcomes. Objective To investigate use of a video recording system (VRS) to better assess and quantify urination behaviors in cats. Animals Eleven healthy cats and 8 cats with disorders potentially associated with abnormal urination patterns. Methods Prospective study design. Litter box urination behaviors were quantified with a VRS for 14 d...
A microprocessor has been used to provide the major control functions in the Telemation/Sandia unattended video surveillance system. The software in the microprocessor provides control of the various hardware components and provides the capability of interactive communications with the operator. This document, in conjunction with the commented source listing, defines the philosophy and function of the software. It is assumed that the reader is familiar with the RCA 1802 COSMAC microprocessor and has a reasonable computer science background.
Xia, Xue; Qiu, Yun; Hu, Lin; Fan, Jingchao; Guo, Xiuming; Zhou, Guomin
International audience; As the proposition of the ‘Internet plus’ concept and speedy progress of new media technology, traditional business have been increasingly shared in the development fruits of the informatization and the networking. Proceeding from the real plant protection demands, the construction of a cloud-based video monitoring system that surveillances diseases and pests in apple orchards has been discussed, aiming to solve the lack of timeliness and comprehensiveness in the contr...
The effects of intrinsic motivation, extrinsic motivation and toolkits onuser participation in User-generated content for video games: : A quantitative study of product development in online communities
Lundmark, Joakim; Sandström Lindberg, Eric
In this thesis we will discuss the subject of user participation in the development process of products, specifically video games, through a concept called User-generated content. Product development demands speed and flexibility in the development process and it has been suggested that managers should revise the process of product development to become more flexible and integrate the consumer in increasingly more steps of the process. Video games will often be modified after its release. In ...
Anishchenko, S.; Beylin, D.; Stepanov, P.; Stepanov, A.; Weinberg, I. N.; Schaeffer, S.; Zavarzin, V.; Shaposhnikov, D.; Smith, M. F.
Unintentional head motion during Positron Emission Tomography (PET) data acquisition can degrade PET image quality and lead to artifacts. Poor patient compliance, head tremor, and coughing are examples of movement sources. Head motion due to patient non-compliance can be an issue with the rise of amyloid brain PET in dementia patients. To preserve PET image resolution and quantitative accuracy, head motion can be tracked and corrected in the image reconstruction algorithm. While fiducial markers can be used, a contactless approach is preferable. A video-based head motion tracking system for a dedicated portable brain PET scanner was developed. Four wide-angle cameras organized in two stereo pairs are used for capturing video of the patient's head during the PET data acquisition. Facial points are automatically tracked and used to determine the six degree of freedom head pose as a function of time. The presented work evaluated the newly designed tracking system using a head phantom and a moving American College of Radiology (ACR) phantom. The mean video-tracking error was 0.99±0.90 mm relative to the magnetic tracking device used as ground truth. Qualitative evaluation with the ACR phantom shows the advantage of the motion tracking application. The developed system is able to perform tracking with accuracy close to millimeter and can help to preserve resolution of brain PET images in presence of movements.
Kipling, Richard P.; Bannink, André; Bellocchi, Gianni; Dalgaard, Tommy; Fox, Naomi J.; Hutchings, Nicholas J.; Kjeldsen, Chris; Lacetera, Nicola; Sinabell, Franz; Topp, Cairistiona F.E.; Oijen, van Marcel; Virkajärvi, Perttu; Scollan, Nigel D.
Ruminant production systems are important producers of food, support rural communities and culture, and help to maintain a range of ecosystem services including the sequestering of carbon in grassland soils. However, these systems also contribute significantly to climate change through greenhouse
Jubran, Mohammad K; Bansal, Manu; Kondi, Lisimachos P; Grover, Rohan
In this paper, we propose an optimal strategy for the transmission of scalable video over packet-based multiple-input multiple-output (MIMO) systems. The scalable extension of H.264/AVC that provides a combined temporal, quality and spatial scalability is used. For given channel conditions, we develop a method for the estimation of the distortion of the received video and propose different error concealment schemes. We show the accuracy of our distortion estimation algorithm in comparison with simulated wireless video transmission with packet errors. In the proposed MIMO system, we employ orthogonal space-time block codes (O-STBC) that guarantee independent transmission of different symbols within the block code. In the proposed constrained bandwidth allocation framework, we use the estimated end-to-end decoder distortion to optimally select the application layer parameters, i.e., quantization parameter (QP) and group of pictures (GOP) size, and physical layer parameters, i.e., rate-compatible turbo (RCPT) code rate and symbol constellation. Results show the substantial performance gain by using different symbol constellations across the scalable layers as compared to a fixed constellation.
Full Text Available Digital Video Recorder (DVR is a digital video recorder with hard drive storage media. When the capacity of the hard disk runs out. It will provide information to users and if there is no response, it will be overwritten automatically and the data will be lost. The main focus of this paper is to enable recording directly connected to a computer editor. The output of both systems (DVR and Direct Recording will be compared with an objective assessment using the Mean Square Error (MSE and Peak Signal to Noise Ratio (PSNR parameter. The results showed that the average value of MSE Direct Recording dB 797.8556108, 137.4346100 DVR MSE dB and the average value of PSNR Direct Recording and DVR PSNR dB 19.5942333 27.0914258 dB. This indicates that the DVR has a much better output quality than Direct Recording.
Machireddy, Archana; van Santen, Jan; Wilson, Jenny L; Myers, Julianne; Hadders-Algra, Mijna; Xubo Song
Cerebral palsy is a non-progressive neurological disorder occurring in early childhood affecting body movement and muscle control. Early identification can help improve outcome through therapy-based interventions. Absence of so-called "fidgety movements" is a strong predictor of cerebral palsy. Currently, infant limb movements captured through either video cameras or accelerometers are analyzed to identify fidgety movements. However both modalities have their limitations. Video cameras do not have the high temporal resolution needed to capture subtle movements. Accelerometers have low spatial resolution and capture only relative movement. In order to overcome these limitations, we have developed a system to combine measurements from both camera and sensors to estimate the true underlying motion using extended Kalman filter. The estimated motion achieved 84% classification accuracy in identifying fidgety movements using Support Vector Machine.
Full Text Available This paper presents a parallel TBB-CUDA implementation for the acceleration of single-Gaussian distribution model, which is effective for background removal in the video-based fire detection system. In this framework, TBB mainly deals with initializing work of the estimated Gaussian model running on CPU, and CUDA performs background removal and adaption of the model running on GPU. This implementation can exploit the combined computation power of TBB-CUDA, which can be applied to the real-time environment. Over 220 video sequences are utilized in the experiments. The experimental results illustrate that TBB+CUDA can achieve a higher speedup than both TBB and CUDA. The proposed framework can effectively overcome the disadvantages of limited memory bandwidth and few execution units of CPU, and it reduces data transfer latency and memory latency between CPU and GPU.
Freitas, Victor Goncalves G.; Mol, Antonio Carlos A.; Biermann, Bruna; Jorge, Carlos Alexandre F., E-mail: firstname.lastname@example.org, E-mail: email@example.com, E-mail: firstname.lastname@example.org [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Araujo, Tawein [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Belas Artes; Legey, Ana Paula [Universidade Gama Filho (UGF), Rio de Janeiro, RJ (Brazil)
This work presents results of educational videos development, mono or stereo, for scientific dissemination of nuclear energy applications. Nuclear energy span through many important applications for the society, ranging from electrical power generation to nuclear medicine, among others. Thus, the purpose is to disseminate this information for the general public and specially for students. Educational videos consist in a good approach for this purpose, due to the involvement of the public they provide, more than simply text or oral exposition, or even static images presentation. Stereo videos result in even more involvement of the public, besides immersion, the later due to the realism 3D views provide. The video developed in this work deals with explanations of electrical power generation, including nuclear reactor operation, shows the percentage of nuclear source as power generation all over the world, and explains also nuclear energy application in medicine. It is expected all these characteristics provided by the use of video or virtual reality techniques will achieve the purpose of disseminating such important information, regarding the benefits of nuclear energy to the society. (author)
This paper examines issues surrounding the production of a Carnival music video VCD in the home studio of the Bolivian indigenous (originario) musician and cultural activist Gregorio Mamani. On the one hand, continuities with rural productive practices suggest a model for the ‘home studio’ more resembling a ‘cottage industry’ than the kind of ‘isolated’ activity separate from family life that Paul Théberge has described for the case of North America (1997). On the other hand, the urban isolat...
Online videos are an increasingly important way technology is contributing to the improvement of physics teaching. Students and teachers have begun to rely on online videos to provide them with content knowledge and instructional strategies. Online audiences are expecting greater production value, and departments are sometimes requesting educators to post video pre-labs or to flip our classrooms. In this article, I share my advice on creating engaging physics videos.
Fu, Chang-Hong; Chan, Yui-Lam; Ip, Tak-Piu; Siu, Wan-Chi
MPEG digital video is becoming ubiquitous for video storage and communications. It is often desirable to perform various video cassette recording (VCR) functions such as backward playback in MPEG videos. However, the predictive processing techniques employed in MPEG severely complicate the backward-play operation. A straightforward implementation of backward playback is to transmit and decode the whole group-of-picture (GOP), store all the decoded frames in the decoder buffer, and play the decoded frames in reverse order. This approach requires a significant buffer in the decoder, which depends on the GOP size, to store the decoded frames. This approach could not be possible in a severely constrained memory requirement. Another alternative is to decode the GOP up to the current frame to be displayed, and then go back to decode the GOP again up to the next frame to be displayed. This approach does not need the huge buffer, but requires much higher bandwidth of the network and complexity of the decoder. In this paper, we propose a macroblock-based algorithm for an efficient implementation of the MPEG video streaming system to provide backward playback over a network with the minimal requirements on the network bandwidth and the decoder complexity. The proposed algorithm classifies macroblocks in the requested frame into backward macroblocks (BMBs) and forward/backward macroblocks (FBMBs). Two macroblock-based techniques are used to manipulate different types of macroblocks in the compressed domain and the server then sends the processed macroblocks to the client machine. For BMBs, a VLC-domain technique is adopted to reduce the number of macroblocks that need to be decoded by the decoder and the number of bits that need to be sent over the network in the backward-play operation. We then propose a newly mixed VLC/DCT-domain technique to handle FBMBs in order to further reduce the computational complexity of the decoder. With these compressed-domain techniques, the
Borodin, Mikhail; The ATLAS collaboration
The second generation of the ATLAS Production System called ProdSys2 is a distributed workload manager that runs daily hundreds of thousands of jobs, from dozens of different ATLAS-specific workflows, across more than a hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based upon many criteria, such as input and output size, memory requirements and CPU consumption, with manageable scheduling policies and by supporting different kinds of computational resources, such as GRID, clouds, supercomputers and volunteer computers. The system dynamically assigns a group of jobs (task) to a group of geographically distributed computing resources. Dynamic assignment and resource utilization is one of the major features of the system. The Production System has a sophisticated job fault recovery mechanism, which efficiently allows running multi-terabyte tasks without human intervention. We have implemented new features which allow automatic task submission and chaining of differe...
Momcilovic, Svetislav; Sousa, Leonel
In this work scalable parallelization methods for computing in real-time the H.264/AVC on multi-cores platforms, such as the most recent Graphical Processing Units (GPUs) and Cell Broadband Engine (Cell/BE), are proposed. By applying the Amdahl's law, the most demanding parts of the video coder were identified and the Single Program Multiple Data and Single Instruction Multiple Data approaches are adopted for achieving real-time processing. In particular, video motion estimation and in-loop deblocking filtering were offloaded to be executed in parallel on either GPUs or Cell/BE Synergistic Processor Elements (SPEs). The limits and advantages of these two architectures when dealing with typical video coding problems, such as data dependencies and large input data are demonstrated. We propose techniques to minimize the impact of branch divergences and branch misprediction, data misalignment, conflicts and non-coalesced memory accesses. Moreover, data dependencies and memory size restrictions are taken into account in order to minimize synchronization and communication time overheads, and to achieve the optimal workload balance given the available multiple cores. Data reusing technique is extensively applied for reducing communication overhead, in order to achieve the maximum processing speedup. Experimental results show that real time H.264/AVC is achieved in both systems by computing 30 frames per second, with a resolution of 720×576 pixels, when full-pixel motion estimation is applied over 5 reference frames and 32×32 search area. When quarter-pixel motion estimation is adopted, real time video coding is obtained on GPU for larger search area and on Cell/BE for smaller search areas.
Fabian, E; Mertz, M; Hofmann, H; Wertheimer, R; Foos, C
The clinical advantages of a scanning laser ophthalmoscope (SLO) and video imaging of fundus pictures are described. Image quality (contrast, depth of field) and imaging possibilities (confocal stop) are assessed. Imaging with different lasers (argon, He-Ne) and changes in imaging rendered possible by confocal alignment of the imaging optics are discussed. Hard copies from video images are still of inferior quality compared to fundus photographs. Methods of direct processing and retrieval of digitally stored SLO video fundus images are illustrated by examples. Modifications for a definitive laser scanning system - in regard to the field of view and the quality of hard copies - are proposed.
Di Paolo, Terry; Wakefield, Jenny S.; Mills, Leila A.; Baker, Laura
This paper outlines a rudimentary process intended to guide faculty in K-12 and higher education through the steps involved to produce video for their classes. The process comprises four steps: planning, development, delivery and reflection. Each step is infused with instructional design information intended to support the collaboration between…
Shelton, Catharyn C.; Archambault, Leanna M.; Hale, Annie E.
This study presents and evaluates a 7-week learning experience embedded in a required content-area course in a teacher preparation program, in which 31 preservice elementary teachers produced digital storytelling videos and considered how this approach may apply to their future classrooms. Qualitative and quantitative data from preservice…
Luitjens, S.B.; Rijckaert, A.M.A.
Since the Þrst experiments on magnetic recording by Valdemar Poulsen in 1898 the use of this technology has grown tremendously and magnetic storage is used in almost every home in the world. A special challenge was the recording of video signals which need a high bandwidth. In the 1950s, television
As part of an inquiry and digital documentary video project, two 12-year-old students studied the Dominican Republic. Over the course of their research, the boys (one of whose parents moved from the Dominican Republic) focused their project on two aspects of the culture of the Dominican Republic: contemporary music (bachata and merengue) and…
Ivashkevich, Olga; Shoppell, Samantha
The authors discuss their participant observation study with the 10-year-old boy and 8-year-old girl who collaborated on making digital videos at home. Major themes that emerged from this research include appropriation of popular culture texts, parody, gender play, and managing self-representations. These themes highlight the benefits of video…
Hathaway, Dawn; Norton, Priscilla
In these times of high-stakes testing, pressure to meet annual yearly progress goals, and standards-driven classroom curriculums, today's teachers face many obstacles that interfere with their ability to teach with and about television and video. If graduate study for teacher educators was designed in ways that reflect the realities of their…
Schneider, Jeffrey C; Ozsecen, Muzaffer Y; Muraoka, Nicholas K; Mancinelli, Chiara; Della Croce, Ugo; Ryan, Colleen M; Bonato, Paolo
Burn contractures are common and difficult to treat. Measuring continuous joint motion would inform the assessment of contracture interventions; however, it is not standard clinical practice. This study examines use of an interactive gaming system to measure continuous joint motion data. To assess the usability of an exoskeleton-based interactive gaming system in the rehabilitation of upper extremity burn contractures. Feasibility study. Eight subjects with a history of burn injury and upper extremity contractures were recruited from the outpatient clinic of a regional inpatient rehabilitation facility. Subjects used an exoskeleton-based interactive gaming system to play 4 different video games. Continuous joint motion data were collected at the shoulder and elbow during game play. Visual analog scale for engagement, difficulty and comfort. Angular range of motion by subject, joint, and game. The study population had an age of 43 ± 16 (mean ± standard deviation) years and total body surface area burned range of 10%-90%. Subjects reported satisfactory levels of enjoyment, comfort, and difficulty. Continuous joint motion data demonstrated variable characteristics by subject, plane of motion, and game. This study demonstrates the feasibility of use of an exoskeleton-based interactive gaming system in the burn population. Future studies are needed that examine the efficacy of tailoring interactive video games to the specific joint impairments of burn survivors. Copyright © 2016 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.
Li, Hejian; An, Ping; Zhang, Zhaoyang
Three-dimensional (3-D) video brings people strong visual perspective experience, but also introduces large data and complexity processing problems. The depth estimation algorithm is especially complex and it is an obstacle for real-time system implementation. Meanwhile, high-resolution depth maps are necessary to provide a good image quality on autostereoscopic displays which deliver stereo content without the need for 3-D glasses. This paper presents a hardware implementation of a full high-definition (HD) depth estimation system that is capable of processing full HD resolution images with a maximum processing speed of 125 fps and a disparity search range of 240 pixels. The proposed field-programmable gate array (FPGA)-based architecture implements a fusion strategy matching algorithm for efficiency design. The system performs with high efficiency and stability by using a full pipeline design, multiresolution processing, synchronizers which avoid clock domain crossing problems, efficient memory management, etc. The implementation can be included in the video systems for live 3-D television applications and can be used as an independent hardware module in low-power integrated applications.
Roger W Li
Full Text Available UNLABELLED: Abnormal visual experience during a sensitive period of development disrupts neuronal circuitry in the visual cortex and results in abnormal spatial vision or amblyopia. Here we examined whether playing video games can induce plasticity in the visual system of adults with amblyopia. Specifically 20 adults with amblyopia (age 15-61 y; visual acuity: 20/25-20/480, with no manifest ocular disease or nystagmus were recruited and allocated into three intervention groups: action videogame group (n = 10, non-action videogame group (n = 3, and crossover control group (n = 7. Our experiments show that playing video games (both action and non-action games for a short period of time (40-80 h, 2 h/d using the amblyopic eye results in a substantial improvement in a wide range of fundamental visual functions, from low-level to high-level, including visual acuity (33%, positional acuity (16%, spatial attention (37%, and stereopsis (54%. Using a cross-over experimental design (first 20 h: occlusion therapy, and the next 40 h: videogame therapy, we can conclude that the improvement cannot be explained simply by eye patching alone. We quantified the limits and the time course of visual plasticity induced by video-game experience. The recovery in visual acuity that we observed is at least 5-fold faster than would be expected from occlusion therapy in childhood amblyopia. We used positional noise and modelling to reveal the neural mechanisms underlying the visual improvements in terms of decreased spatial distortion (7% and increased processing efficiency (33%. Our study had several limitations: small sample size, lack of randomization, and differences in numbers between groups. A large-scale randomized clinical study is needed to confirm the therapeutic value of video-game treatment in clinical situations. Nonetheless, taken as a pilot study, this work suggests that video-game play may provide important principles for treating amblyopia
Joongheon Kim; Eun-Seok Ryu
This paper presents the quality analysis results of high-definition video streaming in two-tiered camera sensor network applications. In the camera-sensing system, multiple cameras sense visual scenes in their target fields and transmit the video streams via IEEE 802.15.3c multigigabit wireless links. However, the wireless transmission introduces interferences to the other links. This paper analyzes the capacity degradation due to the interference impacts from the camera-sensing nodes to the ...
Rui Sergio Monteiro de Barros
Full Text Available Abstract The right femoral vessels of 80 rats were identified and dissected. External lengths and diameters of femoral arteries and femoral veins were measured using either a microscope or a video magnification system. Findings were correlated to animals’ weights. Mean length was 14.33 mm for both femoral arteries and femoral veins, mean diameter of arteries was 0.65 mm and diameter of veins was 0.81 mm. In our sample, rats’ body weights were only correlated with the diameter of their femoral veins.
Krüger, Andreas; Edelmann-Nusser, Jürgen
This study aims at determining the accuracy of a full body inertial measurement system in a real skiing environment in comparison with an optical video based system. Recent studies have shown the use of inertial measurement systems for the determination of kinematical parameters in alpine skiing. However, a quantitative validation of a full body inertial measurement system for the application in alpine skiing is so far not available. For the purpose of this study, a skier performed a test-run equipped with a full body inertial measurement system in combination with a DGPS. In addition, one turn of the test-run was analyzed by an optical video based system. With respect to the analyzed angles, a maximum mean difference of 4.9° was measured. No differences in the measured angles between the inertial measurement system and the combined usage with a DGPS were found. Concerning the determination of the skier's trajectory, an additional system (e.g., DGPS) must be used. As opposed to optical methods, the main advantages of the inertial measurement system are the determination of kinematical parameters without the limitation of restricted capture volume, and small time costs for the measurement preparation and data analysis.
Khalid, Md. Saifuddin; Hossan, Md. Iqbal
The integration of video conferencing systems (VCS) have increased significantly in the classrooms and administrative practices of higher education institutions. The VCSs discussed in the existing literature can be broadly categorized as desktop systems (e.g. Scopia), WebRTC or Real......-Time Communications (e.g. Google Hangout, Adobe Connect, Cisco WebEx, and appear.in), and dedicated (e.g. Polycom). There is a lack of empirical study on usability evaluation of the interactive systems in educational contexts. This study identifies usability errors and measures user satisfaction of a dedicated VCS......) analysis of 12 user responses results below average score. Poststudy system test by the vendor has identified cabling and setup error. Applying SUMI followed by qualitative methods might enrich evaluation outcomes....
Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.
Full Text Available A major learning difficulty of Japanese foreign language (JFL learners is the complex composition of two syllabaries, hiragana and katakana, and kanji characters adopted from logographic Chinese ones. As the number of Japanese language learners increases, computer-assisted Japanese language education gradually gains more attention. This study aimed to adopt a Japanese word segmentation system to help JFL learners overcome literacy problems. This study adopted MeCab, a Japanese morphological analyzer and part-of-speech (POS tagger, to segment Japanese texts into separate morphemes by adding spaces and to attach POS tags to each morpheme for beginners. The participants were asked to participate in three experimental activities involvingwatching two Japanese videos with general or segmented Japanese captions and complete the Nielsen’s Attributes of Usability (NAU survey and the After Scenario Questionnaire (ASQ to evaluate the usability of the learning activities. The results of the system evaluation showed that the videos with the segmented captions could increase the participants’ learning motivation and willingness to adopt the word segmentation system to learn Japanese.
Nomura, Yoshihiko; Matsuda, Ryutaro; Sakamoto, Ryota; Sugiura, Tokuhiro; Matsui, Hirokazu; Kato, Norihiko
The authors proposed a high-quality and small-capacity lecture-video-file creating system for distance e-learning system. Examining the feature of the lecturing scene, the authors ingeniously employ two kinds of image-capturing equipment having complementary characteristics : one is a digital video camera with a low resolution and a high frame rate, and the other is a digital still camera with a high resolution and a very low frame rate. By managing the two kinds of image-capturing equipment, and by integrating them with image processing, we can produce course materials with the greatly reduced file capacity : the course materials satisfy the requirements both for the temporal resolution to see the lecturer's point-indicating actions and for the high spatial resolution to read the small written letters. As a result of a comparative experiment, the e-lecture using the proposed system was confirmed to be more effective than an ordinary lecture from the viewpoint of educational effect.
Khosla, Deepak; Moore, Christopher K.; Chelian, Suhas
This paper presents a bio-inspired method for spatio-temporal recognition in static and video imagery. It builds upon and extends our previous work on a bio-inspired Visual Attention and object Recognition System (VARS). The VARS approach locates and recognizes objects in a single frame. This work presents two extensions of VARS. The first extension is a Scene Recognition Engine (SCE) that learns to recognize spatial relationships between objects that compose a particular scene category in static imagery. This could be used for recognizing the category of a scene, e.g., office vs. kitchen scene. The second extension is the Event Recognition Engine (ERE) that recognizes spatio-temporal sequences or events in sequences. This extension uses a working memory model to recognize events and behaviors in video imagery by maintaining and recognizing ordered spatio-temporal sequences. The working memory model is based on an ARTSTORE1 neural network that combines an ART-based neural network with a cascade of sustained temporal order recurrent (STORE)1 neural networks. A series of Default ARTMAP classifiers ascribes event labels to these sequences. Our preliminary studies have shown that this extension is robust to variations in an object's motion profile. We evaluated the performance of the SCE and ERE on real datasets. The SCE module was tested on a visual scene classification task using the LabelMe2 dataset. The ERE was tested on real world video footage of vehicles and pedestrians in a street scene. Our system is able to recognize the events in this footage involving vehicles and pedestrians.
Bruellmann, D D; Tjaden, H; Schwanecke, U; Barth, P
We propose an augmented reality system for the reliable detection of root canals in video sequences based on a k-nearest neighbor color classification and introduce a simple geometric criterion for teeth. The new software was implemented using C++, Qt, and the image processing library OpenCV. Teeth are detected in video images to restrict the segmentation of the root canal orifices by using a k-nearest neighbor algorithm. The location of the root canal orifices were determined using Euclidean distance-based image segmentation. A set of 126 human teeth with known and verified locations of the root canal orifices was used for evaluation. The software detects root canals orifices for automatic classification of the teeth in video images and stores location and size of the found structures. Overall 287 of 305 root canals were correctly detected. The overall sensitivity was about 94 %. Classification accuracy for molars ranged from 65.0 to 81.2 % and from 85.7 to 96.7 % for premolars. The realized software shows that observations made in anatomical studies can be exploited to automate real-time detection of root canal orifices and tooth classification with a software system. Automatic storage of location, size, and orientation of the found structures with this software can be used for future anatomical studies. Thus, statistical tables with canal locations will be derived, which can improve anatomical knowledge of the teeth to alleviate root canal detection in the future. For this purpose the software is freely available at: http://www.dental-imaging.zahnmedizin.uni-mainz.de/.
Background Violent content in video games evokes many concerns but there is little research concerning its rewarding aspects. It was demonstrated that playing a video game leads to striatal dopamine release. It is unclear, however, which aspects of the game cause this reward system activation and if violent content contributes to it. We combined functional Magnetic Resonance Imaging (fMRI) with individual affect measures to address the neuronal correlates of violence in a video game. Results Thirteen male German volunteers played a first-person shooter game (Tactical Ops: Assault on Terror) during fMRI measurement. We defined success as eliminating opponents, and failure as being eliminated themselves. Affect was measured directly before and after game play using the Positive and Negative Affect Schedule (PANAS). Failure and success events evoked increased activity in visual cortex but only failure decreased activity in orbitofrontal cortex and caudate nucleus. A negative correlation between negative affect and responses to failure was evident in the right temporal pole (rTP). Conclusions The deactivation of the caudate nucleus during failure is in accordance with its role in reward-prediction error: it occurred whenever subject missed an expected reward (being eliminated rather than eliminating the opponent). We found no indication that violence events were directly rewarding for the players. We addressed subjective evaluations of affect change due to gameplay to study the reward system. Subjects reporting greater negative affect after playing the game had less rTP activity associated with failure. The rTP may therefore be involved in evaluating the failure events in a social context, to regulate the players' mood. PMID:21749711
Full Text Available Abstract Background Violent content in video games evokes many concerns but there is little research concerning its rewarding aspects. It was demonstrated that playing a video game leads to striatal dopamine release. It is unclear, however, which aspects of the game cause this reward system activation and if violent content contributes to it. We combined functional Magnetic Resonance Imaging (fMRI with individual affect measures to address the neuronal correlates of violence in a video game. Results Thirteen male German volunteers played a first-person shooter game (Tactical Ops: Assault on Terror during fMRI measurement. We defined success as eliminating opponents, and failure as being eliminated themselves. Affect was measured directly before and after game play using the Positive and Negative Affect Schedule (PANAS. Failure and success events evoked increased activity in visual cortex but only failure decreased activity in orbitofrontal cortex and caudate nucleus. A negative correlation between negative affect and responses to failure was evident in the right temporal pole (rTP. Conclusions The deactivation of the caudate nucleus during failure is in accordance with its role in reward-prediction error: it occurred whenever subject missed an expected reward (being eliminated rather than eliminating the opponent. We found no indication that violence events were directly rewarding for the players. We addressed subjective evaluations of affect change due to gameplay to study the reward system. Subjects reporting greater negative affect after playing the game had less rTP activity associated with failure. The rTP may therefore be involved in evaluating the failure events in a social context, to regulate the players' mood.
Mathiak, Krystyna A; Klasen, Martin; Weber, René; Ackermann, Hermann; Shergill, Sukhwinder S; Mathiak, Klaus
Violent content in video games evokes many concerns but there is little research concerning its rewarding aspects. It was demonstrated that playing a video game leads to striatal dopamine release. It is unclear, however, which aspects of the game cause this reward system activation and if violent content contributes to it. We combined functional Magnetic Resonance Imaging (fMRI) with individual affect measures to address the neuronal correlates of violence in a video game. Thirteen male German volunteers played a first-person shooter game (Tactical Ops: Assault on Terror) during fMRI measurement. We defined success as eliminating opponents, and failure as being eliminated themselves. Affect was measured directly before and after game play using the Positive and Negative Affect Schedule (PANAS). Failure and success events evoked increased activity in visual cortex but only failure decreased activity in orbitofrontal cortex and caudate nucleus. A negative correlation between negative affect and responses to failure was evident in the right temporal pole (rTP). The deactivation of the caudate nucleus during failure is in accordance with its role in reward-prediction error: it occurred whenever subject missed an expected reward (being eliminated rather than eliminating the opponent). We found no indication that violence events were directly rewarding for the players. We addressed subjective evaluations of affect change due to gameplay to study the reward system. Subjects reporting greater negative affect after playing the game had less rTP activity associated with failure. The rTP may therefore be involved in evaluating the failure events in a social context, to regulate the players' mood.
This book provides a comprehensive analysis of various solar based hydrogen production systems. The book covers first-law (energy based) and second-law (exergy based) efficiencies and provides a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book gives a clear understanding of the sustainability and environmental impact analysis of the above systems. The book will be particularly useful for a clear understanding
William S. McPhee
The objective of this project is to improve the productivity and lower the expense of existing vacuum blasting technology. This technology is used to remove radioactive contamination, PCBs, and lead-based paint and provides worker protection by continuously recycling the material and dust for the decontamination tasks. The proposed work would increase the cleaning rate and provide safe and cost-effective decontamination of the DOE sites. This work focuses on redesigning and improving existing vacuum blasting technology including blast head nozzles, ergonomic handling of the blast head by reducing its weight; brush-ring design, vacuum level regulator, efficiency of the dust separator, and operational control sensors. The redesign is expected to enhance the productivity and economy of the vacuum blasting system by at least 50% over current vacuum blasting systems. There are three phases in the project. Phase I consists of developing and testing mathematical models. Phase II consists of pre-prototype design and fabrication and pre-prototype unit testing. Phase III consists of prototype design and field verification testing. In phase I, mathematical models are developed and analyzed for the nozzle, blast head, wind curtain, and dust separator, first as individual devices and then combined as an integrated model. This allows study of respective airflow and design parameters. The Contractor shall, based on the results of the mathematical modeling studies, design experimental models of the components and test these models. In addition, the Contractor shall develop sensors to detect the relationship of the blast head to the blast surfaces and controls to minimize the dependency on an operator's skill and judgment to obtain optimum positioning, as well as real-time characterization sensors to determine as the blast head is moving the depth to which coatings must be removed, thereby improving production and minimizing waste. In phase II, the Contractor shall design and
Okano, Fumio; Kawakita, Masahiro; Arai, Jun; Sasaki, Hisayuki; Yamashita, Takayuki; Sato, Masahito; Suehiro, Koya; Haino, Yasuyuki
The integral method enables observers to see 3D images like real objects. It requires extremely high resolution for both capture and display stages. We present an experimental 3D television system based on the integral method using an extremely high-resolution video system. The video system has 4,000 scanning lines using the diagonal offset method for two green channels. The number of elemental lenses in the lens array is 140 (vertical) × 182 (horizontal). The viewing zone angle is wider than 20 degrees in practice. This television system can capture 3D objects and provides full color and full parallax 3D images in real time.
Non-intrusive video imaging sensors are commonly used in traffic monitoring : and surveillance. For some applications it is necessary to transmit the video : data over communication links. However, due to increased requirements of : bitrate this mean...
Karapetyan, K. G.; Denisova, O. V.
The processes of formation of microlenses in photosensitive silicate and germanate glasses have been studied. A series of successive operations with samples of photosensitive glass activated by silver and cerium ions: irradiation, photolithography, secondary heat treatment, diffusion and ion exchange lead to the formation of various profiles on the glass surface, including convex or concave lens surfaces. On the basis of this effect, a promising technology for the production of raster microlenses and lenses for various optical devices and video cameras of a robotic system was developed.
Yaser Mohammad Taheri; Alireza Zolghadr–asli; Mehran Yazdi
Video watermarking is usually considered as watermarking of a set of still images. In frame-by-frame watermarking approach, each video frame is seen as a single watermarked image, so collusion attack is more critical in video watermarking. If the same or redundant watermark is used for embedding in every frame of video, the watermark can be estimated and then removed by watermark estimate remodolulation (WER) attack. Also if uncorrelated watermarks are used for every frame, these watermarks c...
Arai, Jun; Okui, Makoto; Yamashita, Takayuki; Okano, Fumio
We have developed an integral three-dimensional (3-D) television that uses a 2000-scanning-line video system that can shoot and display 3-D color moving images in real time. We had previously developed an integral 3-D television that used a high-definition television system. The new system uses ˜6 times as many elemental images [160 (horizontal)×118 (vertical) elemental images] arranged at ˜1.5 times the density to improve further the picture quality of the reconstructed image. Through comparison an image near the lens array can be reconstructed at ˜1.9 times the spatial frequency, and the viewing angle is ˜1.5 times as wide.
Holladay, Johnathan E; Muzatko, Danielle S; White, James F; Zacher, Alan H
Hydrogenolysis systems are provided that can include a reactor housing an Ru-comprising hydrogenolysis catalyst and wherein the contents of the reactor is maintained at a neutral or acidic pH. Reactant reservoirs within the system can include a polyhydric alcohol compound and a base, wherein a weight ratio of the base to the compound is less than 0.05. Systems also include the product reservoir comprising a hydrogenolyzed polyhydric alcohol compound and salts of organic acids, and wherein the moles of base are substantially equivalent to the moles of salts or organic acids. Processes are provided that can include an Ru-comprising catalyst within a mixture having a neutral or acidic pH. A weight ratio of the base to the compound can be between 0.01 and 0.05 during exposing.
Holladay, Johnathan E.; Muzatko, Danielle S.; White, James F.; Zacher, Alan H.
Hydrogenolysis systems are provided that can include a reactor housing an Ru-comprising hydrogenolysis catalyst and wherein the contents of the reactor is maintained at a neutral or acidic pH. Reactant reservoirs within the system can include a polyhydric alcohol compound and a base, wherein a weight ratio of the base to the compound is less than 0.05. Systems also include the product reservoir comprising a hydrogenolyzed polyhydric alcohol compound and salts of organic acids, and wherein the moles of base are substantially equivalent to the moles of salts or organic acids. Processes are provided that can include an Ru-comprising catalyst within a mixture having a neutral or acidic pH. A weight ratio of the base to the compound can be between 0.01 and 0.05 during exposing.
Takahata, Minoru; Uemori, Akira; Nakano, Hirotaka
This video-on-demand service is constructed of distributed servers, including video servers that supply real-time MPEG-1 video & audio, real-time MPEG-1 encoders, and an application server that supplies additional text information and agents for retrieval. This system has three distinctive features that enable it to provide multi viewpoint access to real-time visual information: (1) The terminal application uses an agent-oriented approach that allows the system to be easily extended. The agents are implemented using a commercial authoring tool plus additional objects that communicate with the video servers by using TCP/IP protocols. (2) The application server manages the agents, automatically processes text information and is able to handle unexpected alterations of the contents. (3) The distributed system has an economical, flexible architecture to store long video streams. The real-time MPEG-1 encoder system is based on multi channel phase-shifting processing. We also describe a practical application of this system, a prototype TV-on-demand service called TVOD. This provides access to broadcast television programs for the previous week.
Schirrmann, Thomas; Al-Halabi, Laila; Dübel, Stefan; Hust, Michael
Recombinant antibodies are the fastest growing class of therapeutic proteins. Furthermore, antibodies are key detection reagents in research and diagnostics. The increasing demand for antibodies with regards to amount and quality resulted in the development of a variety of recombinant production systems employing gram-negative and gram-positive bacteria, yeast and filamentous fungi, insect cell lines as well as mammalian cell lines. More recently, antibodies were also successfully produced in transgenic plants and animals. Currently, the production of recombinant antibodies for therapy is performed in mammalian cell lines to reduce the risk of immunogenicity caused by non-human post-translational modifications, in particular glycosylation. However, novel strategies already allow human-like glycosylation patterns in yeast, insect cell lines and transgenic plants. Furthermore, therapeutic strategies not requiring glycosylation of the Fc portion have been conceived, most prominently using bispecific antibodies or scFv fusion proteins, which can be produced in bacteria. Here, we review all current antibody production systems considering their advantages and limitations with respect to intended applications.
Ken L. Smith; Marc E. Leveque
The report herein is a summary of the work performed on three projects to demonstrate hydrocarbon drilling and production methods applicable to deep and ultra deepwater field developments in the Gulf of Mexico and other like applications around the world. This work advances technology that could lead to more economic development and exploitation of reserves in ultra-deep water or remote areas. The first project is Subsea Processing. Its scope includes a review of the ''state of the art'' in subsea components to enable primary production process functions such as first stage liquids and gas separation, flow boosting, chemical treatment, flow metering, etc. These components are then combined to allow for the elimination of costly surface production facilities at the well site. A number of studies were then performed on proposed field development projects to validate the economic potential of this technology. The second project involved the design and testing of a light weight production riser made of composite material. The proposed design was to meet an actual Gulf of Mexico deepwater development project. The various engineering and testing work is reviewed, including test results. The third project described in this report encompasses the development and testing of a close tolerance liner drilling system, a new technology aimed at reducing deepwater drilling costs. The design and prototype testing in a test well are described in detail.
Nielsen, Thomas Dyhre; Jensen, Finn Verner
notably, there was a lack of both knowledge and data concerning possible faults, and it therefore turned out to be infeasible to learn/construct a standard classification model for doing fault detection. As an alternative we propose a method for doing on-line fault detection using only a model of normal......We present a new methodology for detecting faults and abnormal behavior in production plants. The methodology stems from a joint project with a Danish energy consortium. During the course of the project we encountered several problems that we believe are common for projects of this type. Most...... system operation, i.e., it does not rely on information about the possible faults. We illustrate the proposed method using real-world data from a coal driven power plant as well as simulated data from an oil production facility....
The High Resolution Stereoscopic Video Camera System (HRSVS) was designed by the Savannah River Technology Center (SRTC) to provide routine and troubleshooting views of tank interiors during characterization and remediation phases of underground storage tank (UST) processing. The HRSVS is a dual color camera system designed to provide stereo viewing of the interior of the tanks including the tank wall in a Class 1, Division 1, flammable atmosphere. The HRSVS was designed with a modular philosophy for easy maintenance and configuration modifications. During operation of the system with the LDUA, the control of the camera system will be performed by the LDUA supervisory data acquisition system (SDAS). Video and control status 1458 will be displayed on monitors within the LDUA control center. All control functions are accessible from the front panel of the control box located within the Operations Control Trailer (OCT). The LDUA will provide all positioning functions within the waste tank for the end effector. Various electronic measurement instruments will be used to perform CG and A activities. The instruments may include a digital volt meter, oscilloscope, signal generator, and other electronic repair equipment. None of these instruments will need to be calibrated beyond what comes from the manufacturer. During CG and A a temperature indicating device will be used to measure the temperature of the outside of the HRSVS from initial startup until the temperature has stabilized. This device will not need to be in calibration during CG and A but will have to have a current calibration sticker from the Standards Laboratory during any acceptance testing. This sensor will not need to be in calibration during CG and A but will have to have a current calibration sticker from the Standards Laboratory during any acceptance testing.
Full Text Available Aims: The aims of this study were (1 to investigate the influence of physical movement on near-infrared spectroscopy (NIRS data, (2 to establish a video-NIRS system which simultaneously records NIRS data and the subject’s movement, and (3 to measure the oxygenated hemoglobin (oxy-Hb concentration change (Δoxy-Hb during a word fluency (WF task. Experiment 1: In 5 healthy volunteers, we measured the oxy-Hb and deoxygenated hemoglobin (deoxy-Hb concentrations during 11 kinds of facial, head, and extremity movements. The probes were set in the bilateral frontal regions. The deoxy-Hb concentration was increased in 85% of the measurements. Experiment 2: Using a pillow on the backrest of the chair, we established the video-NIRS system with data acquisition and video capture software. One hundred and seventy-six elderly people performed the WF task. The deoxy-Hb concentration was decreased in 167 subjects (95%. Experiment 3: Using the video-NIRS system, we measured the Δoxy-Hb, and compared it with the results of the WF task. Δoxy-Hb was significantly correlated with the number of words. Conclusion: Like the blood oxygen level-dependent imaging effect in functional MRI, the deoxy-Hb concentration will decrease if the data correctly reflect the change in neural activity. The video-NIRS system might be useful to collect NIRS data by recording the waveforms and the subject’s appearance simultaneously.
Full Text Available With the rapid development of wireless networks and image acquisition technology, wireless video transmission technology has been widely applied in various communication systems. The traditional video monitoring technology is restricted by some conditions such as layout, environmental, the relatively large volume, cost, and so on. In view of this problem, this paper proposes a method that the mobile car can be equipped with wireless video monitoring system. The mobile car which has some functions such as detection, video acquisition and wireless data transmission is developed based on STC89C52 Micro Control Unit (MCU and WiFi router. Firstly, information such as image, temperature and humidity is processed by the MCU and communicated with the router, and then returned by the WiFi router to the host computer phone. Secondly, control information issued by the host computer phone is received by WiFi router and sent to the MCU, and then the MCU sends relevant instructions. Lastly, the wireless transmission of video images and the remote control of the car are realized. The results prove that the system has some features such as simple operation, high stability, fast response, low cost, strong flexibility, widely application, and so on. The system has certain practical value and popularization value.
The Seattle-King County Hazardous Waste Management Plan provides the framework for an intensive effort to keep Household Hazardous Waste (HHW) and Small Quantity Generator (SQG) wastes from entering the municipal solid and liquid waste streams. Many innovative programs for managing small sources of hazardous waste have been developed in response to the Plan. With the assistance of Urban Consortium grants, the City of Seattle has researched and developed a series of reports describing the planning, operation and evaluation of the plan's HHW collection programs. Three of the Plan's programs of particular interest to other jurisdictions are the fixed site and mobile HHW Collection Facilities, and the Business Waste Consultations provided to SQG's. In 1991, Seattle received an Urban Consortium grant to produce two videos showing how the HHW Collection Facilities and Business Consultations programs work. This report provides an overviews of the video development and production process and a discussion of the lessons learned by the staff directing the production.
Giacomelli, G.A.; Sase, S.; Cramer, R.; Hoogeboom, J.; McKenzie, A.; Parbst, K.; Sacrascia-Mugnozza, G.; Selina, P.; Sharp, D.A.; Voogt, J.O.; Weel, van P.A.; Mears, D.
Environmentally sound greenhouse production requires that: demand for market products is understood; greenhouse design addresses the climate circum-stances; input resources are available and consumed efficiently, and; there must be a reasonable balance of production products to the environmental
K. L. Smith; M. E. Leveque
This report includes technical progress made during the period October, 2003 through September, 2004. At the end of the last technical progress report, the subsea processing aspects of the work program had been dropped due to the lack of commercial opportunity within ConocoPhillips, and the program had been redirected towards two other promising deepwater technologies: the development and demonstration of a composite production riser, and the development and testing of a close-tolerance liner drilling system. This report focuses on these two technologies.
Masunari, T.; Yamagami, K.; Mizuno, M.; Une, S.; Uotani, M.; Kanematsu, T.; Demachi, K.; Sano, S.; Nakamura, Y.; Suzuki, S.
Two high-speed video cameras are successfully used to detect the motion of a flying shuttlecock of badminton. The shuttlecock detection system is applied to badminton robots that play badminton fully autonomously. The detection system measures the three dimensional position and velocity of a flying shuttlecock, and predicts the position where the shuttlecock falls to the ground. The badminton robot moves quickly to the position where the shuttle-cock falls to, and hits the shuttlecock back into the opponent's side of the court. In the game of badminton, there is a large audience, and some of them move behind a flying shuttlecock, which are a kind of background noise and makes it difficult to detect the motion of the shuttlecock. The present study demonstrates that such noises can be eliminated by the method of stereo imaging with two high-speed cameras.
Keramidas, Eystratios G; Maroulis, Dimitris; Iakovidis, Dimitris K
In this paper, we present a computer-aided-diagnosis (CAD) system prototype, named TND (Thyroid Nodule Detector), for the detection of nodular tissue in ultrasound (US) thyroid images and videos acquired during thyroid US examinations. The proposed system incorporates an original methodology that involves a novel algorithm for automatic definition of the boundaries of the thyroid gland, and a novel approach for the extraction of noise resilient image features effectively representing the textural and the echogenic properties of the thyroid tissue. Through extensive experimental evaluation on real thyroid US data, its accuracy in thyroid nodule detection has been estimated to exceed 95%. These results attest to the feasibility of the clinical application of TND, for the provision of a second more objective opinion to the radiologists by exploiting image evidences.
The primary purpose of the "modification and validation of an automotive data processing unit (DPU), compressed video system, and communications equipment" cooperative research and development agreement (CRADA) was to modify and validate both hardware and software, developed by Scientific Atlanta, Incorporated (S-A) for defense applications (e.g., rotary-wing airplanes), for the commercial sector surface transportation domain (i.e., automobiles and trucks). S-A also furnished a state-of-the-art compressed video digital storage and retrieval system (CVDSRS), and off-the-shelf data storage and transmission equipment to support the data acquisition system for crash avoidance research (DASCAR) project conducted by Oak Ridge National Laboratory (ORNL). In turn, S-A received access to hardware and technology related to DASCAR. DASCAR was subsequently removed completely and installation was repeated a number of times to gain an accurate idea of complete installation, operation, and removal of DASCAR. Upon satisfactory completion of the DASCAR construction and preliminary shakedown, ORNL provided NHTSA with an operational demonstration of DASCAR at their East Liberty, OH test facility. The demonstration included an on-the-road demonstration of the entire data acquisition system using NHTSA'S test track. In addition, the demonstration also consisted of a briefing, containing the following: ORNL generated a plan for validating the prototype data acquisition system with regard to: removal of DASCAR from an existing vehicle, and installation and calibration in other vehicles; reliability of the sensors and systems; data collection and transmission process (data integrity); impact on the drivability of the vehicle and obtrusiveness of the system to the driver; data analysis procedures; conspicuousness of the vehicle to other drivers; and DASCAR installation and removal training and documentation. In order to identify any operational problems not captured by the systems
Jia, Changxin; Sang, Xinzhu; Liu, Jing; Cheng, Mingsheng
As people's life quality have been improved significantly, the traditional 2D video technology can not meet people's urgent desire for a better video quality, which leads to the rapid development of 3D video technology. Simultaneously people want to watch 3D video in portable devices,. For achieving the above purpose, we set up a remote stereoscopic video play platform. The platform consists of a server and clients. The server is used for transmission of different formats of video and the client is responsible for receiving remote video for the next decoding and pixel restructuring. We utilize and improve Live555 as video transmission server. Live555 is a cross-platform open source project which provides solutions for streaming media such as RTSP protocol and supports transmission of multiple video formats. At the receiving end, we use our laboratory own player. The player for Android, which is with all the basic functions as the ordinary players do and able to play normal 2D video, is the basic structure for redevelopment. Also RTSP is implemented into this structure for telecommunication. In order to achieve stereoscopic display, we need to make pixel rearrangement in this player's decoding part. The decoding part is the local code which JNI interface calls so that we can extract video frames more effectively. The video formats that we process are left and right, up and down and nine grids. In the design and development, a large number of key technologies from Android application development have been employed, including a variety of wireless transmission, pixel restructuring and JNI call. By employing these key technologies, the design plan has been finally completed. After some updates and optimizations, the video player can play remote 3D video well anytime and anywhere and meet people's requirement.
Liu, Wen P.; Mirota, Daniel J.; Uneri, Ali; Otake, Yoshito; Hager, Gregory; Reh, Douglas D.; Ishii, Masaru; Gallia, Gary L.; Siewerdsen, Jeffrey H.
Augmentation of endoscopic video with preoperative or intraoperative image data [e.g., planning data and/or anatomical segmentations defined in computed tomography (CT) and magnetic resonance (MR)], can improve navigation, spatial orientation, confidence, and tissue resection in skull base surgery, especially with respect to critical neurovascular structures that may be difficult to visualize in the video scene. This paper presents the engineering and evaluation of a video augmentation system for endoscopic skull base surgery translated to use in a clinical study. Extension of previous research yielded a practical system with a modular design that can be applied to other endoscopic surgeries, including orthopedic, abdominal, and thoracic procedures. A clinical pilot study is underway to assess feasibility and benefit to surgical performance by overlaying CT or MR planning data in realtime, high-definition endoscopic video. Preoperative planning included segmentation of the carotid arteries, optic nerves, and surgical target volume (e.g., tumor). An automated camera calibration process was developed that demonstrates mean re-projection accuracy (0.7+/-0.3) pixels and mean target registration error of (2.3+/-1.5) mm. An IRB-approved clinical study involving fifteen patients undergoing skull base tumor surgery is underway in which each surgery includes the experimental video-CT system deployed in parallel to the standard-of-care (unaugmented) video display. Questionnaires distributed to one neurosurgeon and two otolaryngologists are used to assess primary outcome measures regarding the benefit to surgical confidence in localizing critical structures and targets by means of video overlay during surgical approach, resection, and reconstruction.
Tsifouti, Anastasia; Nasralla, Moustafa M.; Razaak, Manzoor; Cope, James; Orwell, James M.; Martini, Maria G.; Sage, Kingsley
The Image Library for Intelligent Detection Systems (i-LIDS) provides benchmark surveillance datasets for analytics systems. This paper proposes a methodology to investigate the effect of compression and frame-rate reduction, and to recommend an appropriate suite of degraded datasets for public release. The library consists of six scenarios, including Sterile Zone (SZ) and Parked Vehicle (PV), which are investigated using two different compression algorithms (H.264 and JPEG) and a number of detection systems. PV has higher spatio-temporal complexity than the SZ. Compression performance is dependent on scene content hence PV will require larger bit-streams in comparison with SZ, for any given distortion rate. The study includes both industry standard algorithms (for transmission) and CCTV recorders (for storage). CCTV recorders generally use proprietary formats, which may significantly affect the visual information. Encoding standards such as H.264 and JPEG use the Discrete Cosine Transform (DCT) technique, which introduces blocking artefacts. The H.264 compression algorithm follows a hybrid predictive coding approach to achieve high compression gains, exploiting both spatial and temporal redundancy. The highly predictive approach of H.264 may introduce more artefacts resulting in a greater effect on the performance of analytics systems than JPEG. The paper describes the two main components of the proposed methodology to measure the effect of degradation on analytics performance. Firstly, the standard tests, using the `f-measure' to evaluate the performance on a range of degraded video sets. Secondly, the characterisation of the datasets, using quantification of scene features, defined using image processing techniques. This characterization permits an analysis of the points of failure introduced by the video degradation.
In the past decade, the display format from (HD High Definition) through Full HD(1920X1080) to UHD(4kX2k), mainly guides display industry to two directions: one is liquid crystal display(LCD) from 10 inch to 100 inch and more, and the other is projector. Although LCD has been popularly used in market; however, the investment for production such kind displays cost more money expenditure, and less consideration of environmental pollution and protection. The Projection system may be considered, due to more viewing access, flexible in location, energy saving and environmental protection issues. The topic is to design and fabricate a short throw factor liquid crystal on silicon (LCoS) projection system for cinema. It provides a projection lens system, including a tele-centric lens fitted for emitted LCoS to collimate light to enlarge the field angle. Then, the optical path is guided by a symmetric lens. Light of LCoS may pass through the lens, hit on and reflect through an aspherical mirror, to form a less distortion image on blank wall or screen for home cinema. The throw ratio is less than 0.33.
Magic Lantern and Honeywell FM and T worked together to develop lower-cost, visible light solid-state laser sources to use in laser projector products. Work included a new family of video displays that use lasers as light sources. The displays would project electronic images up to 15 meters across and provide better resolution and clarity than movie film, up to five times the resolution of the best available computer monitors, up to 20 times the resolution of television, and up to six times the resolution of HDTV displays. The products that could be developed as a result of this CRADA could benefit the economy in many ways, such as: (1) Direct economic impact in the local manufacture and marketing of the units. (2) Direct economic impact in exports and foreign distribution. (3) Influencing the development of other elements of display technology that take advantage of the signals that these elements allow. (4) Increased productivity for engineers, FAA controllers, medical practitioners, and military operatives.
Pasch, H. L.
An overview of video coding is presented. The aim is not to give a technical summary of possible coding techniques, but to address subjects related to video compression in general and to the transmission of compressed video in more detail. Bit rate reduction is in general possible by removing redundant information; removing information the eye does not use anyway; and reducing the quality of the video. The codecs which are used for reducing the bit rate, can be divided into two groups: Constant Bit rate Codecs (CBC's), which keep the bit rate constant, but vary the video quality; and Variable Bit rate Codecs (VBC's), which keep the video quality constant by varying the bit rate. VBC's can be in general reach a higher video quality than CBC's using less bandwidth, but need a transmission system that allows the bandwidth of a connection to fluctuate in time. The current and the next generation of the PSTN does not allow this; ATM might. There are several factors which influence the quality of video: the bit error rate of the transmission channel, slip rate, packet loss rate/packet insertion rate, end-to-end delay, phase shift between voice and video, and bit rate. Based on the bit rate of the coded video, the following classification of coded video can be made: High Definition Television (HDTV); Broadcast Quality Television (BQTV); video conferencing; and video telephony. The properties of these classes are given. The video conferencing and video telephony equipment available now and in the next few years can be divided into three categories: conforming to 1984 CCITT standard for video conferencing; conforming to 1988 CCITT standard; and conforming to no standard.
Noel F. Peden
Full Text Available Capturing video at a conference is easy. Doing it so the product is useful is another matter. Many subtle problems come into play so that video and audio obtained can be used to create a final product. This article discusses what the author learned in the two years of shooting and editing video for Code4Lib conference.
Donnelly, Mark P; Nugent, Chris D; Craig, David; Passmore, Peter; Mulvenna, Maurice
The current paper presents details regarding the early developments of a memory prompt solution for persons with early dementia. Using everyday technology, in the form of a cell-phone, video reminders are delivered to assist with daily activities. The proposed CPVS system will permit carers to record and schedule video reminders remotely using a standard personal computer and web cam. It is the aim of the three year project that through the frequent delivery of helpful video reminders that a 'virtual carer' will be present with the person with dementia at all times. The first prototype of the system has been fully implemented with the first field trial scheduled to take place in May 2008. Initially, only three patient carer dyads will be involved, however, the second field trial aims to involve 30 dyads in the study. Details of the first prototype and the methods of evaluation are presented herein.
Full Text Available This paper presents an object occlusion detection algorithm using object depth information that is estimated by automatic camera calibration. The object occlusion problem is a major factor to degrade the performance of object tracking and recognition. To detect an object occlusion, the proposed algorithm consists of three steps: (i automatic camera calibration using both moving objects and a background structure; (ii object depth estimation; and (iii detection of occluded regions. The proposed algorithm estimates the depth of the object without extra sensors but with a generic red, green and blue (RGB camera. As a result, the proposed algorithm can be applied to improve the performance of object tracking and object recognition algorithms for video surveillance systems.
Full Text Available In the paper are presented the results of strength analysis for the two types of the welded joints made according to conventional and laser technologies of high-strength steel S960QC. The hardness distributions, tensile properties and fracture toughness were determined for the weld material and heat affect zone material for both types of the welded joints. Tests results shown on advantage the laser welded joints in comparison to the convention ones. Tensile properties and fracture toughness in all areas of the laser joints have a higher level than in the conventional one. The heat affect zone of the conventional welded joints is a weakness area, where the tensile properties are lower in comparison to the base material. Verification of the tensile tests, which carried out by using the Aramis video system, confirmed this assumption. The highest level of strains was observed in HAZ material and the destruction process occurred also in HAZ of the conventional welded joint.
Beatty, Ian D
In order to facilitate analyzing video games as learning systems and instructional designs as games, we present a theoretical framework that integrates ideas from a broad range of literature. The framework describes games in terms of four layers, all sharing similar structural elements and dynamics: a micro-level game focused on immediate problem-solving and skill development, a macro-level game focused on the experience of the game world and story and identity development, and two meta-level games focused on building or modifying the game and on social interactions around it. Each layer casts gameplay as a co-construction of the game and the player, and contains three dynamical feedback loops: an exploratory learning loop, an intrinsic motivation loop, and an identity loop.
Saveliev, Alexei V [Chicago, IL; Zelepouga, Serguei A [Hoffman Estates, IL; Rue, David M [Chicago, IL
A system and method for real-time monitoring of the interior of a combustor or gasifier wherein light emitted by the interior surface of a refractory wall of the combustor or gasifier is collected using an imaging fiber optic bundle having a light receiving end and a light output end. Color information in the light is captured with primary color (RGB) filters or complimentary color (GMCY) filters placed over individual pixels of color sensors disposed within a digital color camera in a BAYER mosaic layout, producing RGB signal outputs or GMCY signal outputs. The signal outputs are processed using intensity ratios of the primary color filters or the complimentary color filters, producing video images and/or thermal images of the interior of the combustor or gasifier.
Full Text Available An approach has been proposed for automatic adaptive subtitle coloring using fuzzy logic-based algorithm. This system changes the color of the video subtitle/caption to “pleasant” color according to color harmony and the visual perception of the image background colors. In the fuzzy analyzer unit, using RGB histograms of background image, the R, G, and B values for the color of the subtitle/caption are computed using fixed fuzzy IF-THEN rules fully driven from the color harmony theories to satisfy complementary color and subtitle-background color harmony conditions. A real-time hardware structure has been proposed for implementation of the front-end processing unit as well as the fuzzy analyzer unit.
Cho, Jai Wan; Lee, Nam Ho; Choi, Young Soo
There are 760 feederpipes, which they are connected to inlet/outlet of the 380 pressure tube channels on the front of the calandria, in CANDU-type Reactor of Wolsung Nuclear Power Plant. As an ISI(In-Service Inspection) and PSI (Post- Service Inspection) requirements, maintenance activities of measuring the thickness of curvilinear part of feederpipe and inspecting the feederpipe support area within calandria are needed to ensure continued reliable operation of nuclear power plant. And untrasonic probe is used to measure the thickness of curvilinear part of feederpipe, however workers are exposed to radioactivity irradiation during the measurement period. But, it is impossible to inspect feederpipe support area thoroughlv because of narrow and confined accessibility, that is, an inspection space between the pressure tube channels is less than 100mm and pipes in feederpipe support area are congested. And also, workers involved in inspecting feederpipe support area are under the jeopardy of high-level radiation exposure. Concerns about sliding home, which make the move of feederpipe connected to pressure tube channel smooth as pressure tube expands and contracts in its axial direction, stuck to feederpipe support and some of the structural components have made necessary the development of video inspection probe system with narrow and confined accessibility to observe and inspect feederpipe support area more close. Using video inspection probe system, it is possible to inspect and repair abnormality of feederpipe support connected to pressure tube channels of the calandria more accurate and quantative than naked eye. Therefore, that will do much for ensuring safety of CANDU-type nuclear power plant.
Hwang, Euiseok; Yoon, Pilsang; Kim, Nakyoung; Kang, Byongbok; Kim, Kunyul; Park, Jooyoun; Park, Jongyong
A holographic data storage prototype fully integrated with electronics for video demonstration has been developed. It can record data in several tracks of a photopolymer disk and access them arbitrarily during retrieving process from the continuously rotating disk. An embedded controller operates all of the optomechanical components of the prototype automatically and electronic parts conduct adaptive data readout of channel data up to 55 megabit per sec. For real-time video demonstration, video stream are recorded in four concentric circular tracks of the disk. Each recording spot contains about one hundred pages with angle multiplexing. The eleven minute length video data are successfully reconstructed from the prototype.
Wang, C. P.; Bow, R. T.
A laser scanning system capable of scanning at standard video rate has been developed. The scanning mirrors, circuit design and system performance, as well as its applications to video cameras and ultra-violet microscopes, are discussed.
Full Text Available The expansion of Digital Television and the convergence between conventional broadcasting and television over IP contributed to the gradual increase of the number of available channels and on demand video content. Moreover, the dissemination of the use of mobile devices like laptops, smartphones and tablets on everyday activities resulted in a shift of the traditional television viewing paradigm from the couch to everywhere, anytime from any device. Although this new scenario enables a great improvement in viewing experiences, it also brings new challenges given the overload of information that the viewer faces. Recommendation systems stand out as a possible solution to help a watcher on the selection of the content that best fits his/her preferences. This paper describes a web based system that helps the user navigating on broadcasted and online television content by implementing recommendations based on collaborative and content based filtering. The algorithms developed estimate the similarity between items and users and predict the rating that a user would assign to a particular item (television program, movie, etc.. To enable interoperability between different systems, programs? characteristics (title, genre, actors, etc. are stored according to the TV-Anytime standard. The set of recommendations produced are presented through a Web Application that allows the user to interact with the system based on the obtained recommendations.
Schuetz, Christopher; Martin, Richard; Dillon, Thomas; Yao, Peng; Mackrides, Daniel; Harrity, Charles; Zablocki, Alicia; Shreve, Kevin; Bonnett, James; Curt, Petersen; Prather, Dennis
Passive imaging using millimeter waves (mmWs) has many advantages and applications in the defense and security markets. All terrestrial bodies emit mmW radiation and these wavelengths are able to penetrate smoke, fog/clouds/marine layers, and even clothing. One primary obstacle to imaging in this spectrum is that longer wavelengths require larger apertures to achieve the resolutions desired for many applications. Accordingly, lens-based focal plane systems and scanning systems tend to require large aperture optics, which increase the achievable size and weight of such systems to beyond what can be supported by many applications. To overcome this limitation, a distributed aperture detection scheme is used in which the effective aperture size can be increased without the associated volumetric increase in imager size. This distributed aperture system is realized through conversion of the received mmW energy into sidebands on an optical carrier. This conversion serves, in essence, to scale the mmW sparse aperture array signals onto a complementary optical array. The side bands are subsequently stripped from the optical carrier and recombined to provide a real time snapshot of the mmW signal. Using this technique, we have constructed a real-time, video-rate imager operating at 75 GHz. A distributed aperture consisting of 220 upconversion channels is used to realize 2.5k pixels with passive sensitivity. Details of the construction and operation of this imager as well as field testing results will be presented herein.
Desurmont, Xavier; Wijnhoven, Rob; Jaspers, Egbert; Caignart, Olivier; Barais, Mike; Favoreel, Wouter; Delaigle, Jean-Francois
The CANDELA project aims at realizing a system for real-time image processing in traffic and surveillance applications. The system performs segmentation, labels the extracted blobs and tracks their movements in the scene. Performance evaluation of such a system is a major challenge since no standard methods exist and the criteria for evaluation are highly subjective. This paper proposes a performance evaluation approach for video content analysis (VCA) systems and identifies the involved research areas. For these areas we give an overview of the state-of-the-art in performance evaluation and introduce a classification into different semantic levels. The proposed evaluation approach compares the results of the VCA algorithm with a ground-truth (GT) counterpart, which contains the desired results. Both the VCA results and the ground truth comprise description files that are formatted in MPEG-7. The evaluation is required to provide an objective performance measure and a mean to choose between competitive methods. In addition, it enables algorithm developers to measure the progress of their work at the different levels in the design process. From these requirements and the state-of-the-art overview we conclude that standardization is highly desirable for which many research topics still need to be addressed.
Javier I. Portillo
Full Text Available Automatic surveillance of airport surface is one of the core components of advanced surface movement, guidance, and control systems (A-SMGCS. This function is in charge of the automatic detection, identification, and tracking of all interesting targets (aircraft and relevant ground vehicles in the airport movement area. This paper presents a novel approach for object tracking based on sequences of video images. A fuzzy system has been developed to ponder update decisions both for the trajectories and shapes estimated for targets from the image regions extracted in the images. The advantages of this approach are robustness, flexibility in the design to adapt to different situations, and efficiency for operation in real time, avoiding combinatorial enumeration. Results obtained in representative ground operations show the system capabilities to solve complex scenarios and improve tracking accuracy. Finally, an automatic procedure, based on neuro-fuzzy techniques, has been applied in order to obtain a set of rules from representative examples. Validation of learned system shows the capability to learn the suitable tracker decisions.
Ballesta, S; Reymond, G; Pozzobon, M; Duhamel, J-R
To date, assessing the solitary and social behaviors of laboratory primates' colonies relies on time-consuming manual scoring methods. Here, we describe a real-time multi-camera 3D tracking system developed to measure the behavior of socially-housed primates. Their positions are identified using non-invasive color markers such as plastic collars, thus allowing to also track colored objects and to measure their usage. Compared to traditional manual ethological scoring, we show that this system can reliably evaluate solitary behaviors (foraging, solitary resting, toy usage, locomotion) as well as spatial proximity with peers, which is considered as a good proxy of their social motivation. Compared to existing video-based commercial systems currently available to measure animal activity, this system offers many possibilities (real-time data, large volume coverage, multiple animal tracking) at a lower hardware cost. Quantitative behavioral data of animal groups can now be obtained automatically over very long periods of time, thus opening new perspectives in particular for studying the neuroethology of social behavior in primates. Copyright © 2014 Elsevier B.V. All rights reserved.
Jacobsen, Peter; Rudolph, Carsten
Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...
Full Text Available Object Detection with small computation cost and processing time is a necessity in diverse domains such as traffic analysis security cameras video surveillance etc .With current advances in technology and decrease in prices of image sensors and video cameras the resolution of captured images is more than 1MP and has higher frame rates. This implies a considerable data size that needs to be processed in a very short period of time when real-time operations and data processing is needed. Real time video processing with high performance can be achieved with GPU technology. The aim of this study is to evaluate the influence of different image and video resolutions on the processing time number of objects detections and accuracy of the detected object. MOG2 algorithm is used for processing video input data with GPU module. Fuzzy interference system is used to evaluate the accuracy of number of detected object and to show the difference between CPU and GPU computing methods.
... From the Federal Register Online via the Government Publishing Office ] SECURITIES AND EXCHANGE COMMISSION In the Matter of Digital Video Systems, Inc., Geocom Resources, Inc., and GoldMountain Exploration... of Suspension of Trading It appears to the Securities and Exchange Commission that there is a lack of...
Full Text Available Product service system is a new-type production system with high-degree integration and overall optimization of product and service. The participation of suppliers in product service system development will greatly shorten the development cycle and enhance the production efficiency. The task planning of product design is one of the key phases of product service system development process, which mainly contains the design task decomposition and the design task allocation. Aiming at product service system product design, this article conducts the decomposition of design tasks, performs the recognition of coupling design task set, and realizes the structured modeling of design tasks. Outsourcing decision-making analysis is conducted on the design tasks obtained through decomposition process so as to confirm the design tasks that need the participation of suppliers. The allocation model of design tasks is constructed, and the suppliers that take part in product service system development are confirmed based on genetic algorithm. Taking the numerical control machine tool as an example, this article conducts the instance analysis and verifies the feasibility of the forenamed methods.
McNeal, Thomas, Jr.; Kearns, Landon
Video streaming can be a very useful tool for educators. It is now possible for a school?s technical specialist or classroom teacher to create a streaming server with tools that are available in many classrooms. In this article we describe how we created our video streamer using free software, older computers, and borrowed hardware. The system…
Edwards, Kasper; Pedersen, Jørgen Lindgaard
configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...
PPIS includes registrant name and address, chemical ingredients, toxicity category, product names, distributor brand names, site/pest uses, pesticidal type, formulation code, and registration status for all products registered in the U.S.
I M.O. Widyantara
Full Text Available Video surveillance system (VSS is an monitoring system based-on IP-camera. VSS implemented in live streaming and serves to observe and monitor a site remotely. Typically, IP- camera in the VSS has a management software application. However, for ad hoc applications, where the user wants to manage VSS independently, application management software has become ineffective. In the IP-camera installation spread over a large area, an administrator would be difficult to describe the location of the IP-camera. In addition, monitoring an area of IP- Camera will also become more difficult. By looking at some of the flaws in VSS, this paper has proposed a VSS application for easy monitoring of each IP Camera. Applications that have been proposed to integrate the concept of web-based geographical information system with the Google Maps API (Web-GIS. VSS applications built with smart features include maps ip-camera, live streaming of events, information on the info window and marker cluster. Test results showed that the application is able to display all the features built well
Achieve professional quality sound on a limited budget! Harness all new, Hollywood style audio techniques to bring your independent film and video productions to the next level.In Sound for Digital Video, Second Edition industry experts Tomlinson Holman and Arthur Baum give you the tools and knowledge to apply recent advances in audio capture, video recording, editing workflow, and mixing to your own film or video with stunning results. This fresh edition is chockfull of techniques, tricks, and workflow secrets that you can apply to your own projects from preproduction
Online videos are an increasingly important way technology is contributing to the improvement of physics teaching. Students and teachers have begun to rely on online videos to provide them with content knowledge and instructional strategies. Online audiences are expecting greater production value, and departments are sometimes requesting educators…
Ørngreen, Rikke; Henningsen, Birgitte Sølbeck; Louw, Arnt Vestergaard
agenda focusing on video productions in combination with digital storytelling, followed by a presentation of the digital storytelling features. The paper concludes with a suggestion to initiate research in what is identified as Personal Digital Video (PDV) Stories within longitudinal settings, while...
Billah, Mustain; Waheed, Sajjad; Rahman, Mohammad Motiur
Gastrointestinal polyps are considered to be the precursors of cancer development in most of the cases. Therefore, early detection and removal of polyps can reduce the possibility of cancer. Video endoscopy is the most used diagnostic modality for gastrointestinal polyps. But, because it is an operator dependent procedure, several human factors can lead to misdetection of polyps. Computer aided polyp detection can reduce polyp miss detection rate and assists doctors in finding the most important regions to pay attention to. In this paper, an automatic system has been proposed as a support to gastrointestinal polyp detection. This system captures the video streams from endoscopic video and, in the output, it shows the identified polyps. Color wavelet (CW) features and convolutional neural network (CNN) features of video frames are extracted and combined together which are used to train a linear support vector machine (SVM). Evaluations on standard public databases show that the proposed system outperforms the state-of-the-art methods, gaining accuracy of 98.65%, sensitivity of 98.79%, and specificity of 98.52%.
Partha Sindu I Gede
Full Text Available The purpose of this study was to determine the effect of the use of the instructional media based on lecture video and slide synchronization system on Statistics learning achievement of the students of PTI department . The benefit of this research is to help lecturers in the instructional process i to improve student's learning achievements that lead to better students’ learning outcomes. Students can use instructional media which is created from the lecture video and slide synchronization system to support more interactive self-learning activities. Students can conduct learning activities more efficiently and conductively because synchronized lecture video and slide can assist students in the learning process. The population of this research was all students of semester VI (six majoring in Informatics Engineering Education. The sample of the research was the students of class VI B and VI D of the academic year 2016/2017. The type of research used in this study was quasi-experiment. The research design used was post test only with non equivalent control group design. The result of this research concluded that there was a significant influence in the application of learning media based on lectures video and slide synchronization system on statistics learning result on PTI department.
Waheed, Sajjad; Rahman, Mohammad Motiur
Gastrointestinal polyps are considered to be the precursors of cancer development in most of the cases. Therefore, early detection and removal of polyps can reduce the possibility of cancer. Video endoscopy is the most used diagnostic modality for gastrointestinal polyps. But, because it is an operator dependent procedure, several human factors can lead to misdetection of polyps. Computer aided polyp detection can reduce polyp miss detection rate and assists doctors in finding the most important regions to pay attention to. In this paper, an automatic system has been proposed as a support to gastrointestinal polyp detection. This system captures the video streams from endoscopic video and, in the output, it shows the identified polyps. Color wavelet (CW) features and convolutional neural network (CNN) features of video frames are extracted and combined together which are used to train a linear support vector machine (SVM). Evaluations on standard public databases show that the proposed system outperforms the state-of-the-art methods, gaining accuracy of 98.65%, sensitivity of 98.79%, and specificity of 98.52%. PMID:28894460
Full Text Available Gastrointestinal polyps are considered to be the precursors of cancer development in most of the cases. Therefore, early detection and removal of polyps can reduce the possibility of cancer. Video endoscopy is the most used diagnostic modality for gastrointestinal polyps. But, because it is an operator dependent procedure, several human factors can lead to misdetection of polyps. Computer aided polyp detection can reduce polyp miss detection rate and assists doctors in finding the most important regions to pay attention to. In this paper, an automatic system has been proposed as a support to gastrointestinal polyp detection. This system captures the video streams from endoscopic video and, in the output, it shows the identified polyps. Color wavelet (CW features and convolutional neural network (CNN features of video frames are extracted and combined together which are used to train a linear support vector machine (SVM. Evaluations on standard public databases show that the proposed system outperforms the state-of-the-art methods, gaining accuracy of 98.65%, sensitivity of 98.79%, and specificity of 98.52%.
Henningsen, Birgitte; Gundersen, Peter Bukovica; Hautopp, Heidi
This paper introduces to what we define as a collaborative video sketching process. This process links various sketching techniques with digital storytelling approaches and creative reflection processes in video productions. Traditionally, sketching has been used by designers across various...... forms and through empirical examples, we present and discuss the video recording of sketching sessions, as well as development of video sketches by rethinking, redoing and editing the recorded sessions. The empirical data is based on workshop sessions with researchers and students from universities...... and university colleges and primary and secondary school teachers. As researchers, we have had different roles in these action research case studies where various video sketching techniques were applied.The analysis illustrates that video sketching can take many forms, and two common features are important...
Full Text Available As academics we study, research and teach audiovisual media, yet rarely disseminate and mediate through it. Today, developments in production technologies have enabled academic researchers to create videos and mediate audiovisually. In academia it is taken for granted that everyone can write a text. Is it now time to assume that everyone can make a video essay? Using the online journal of academic videos Audiovisual Thinking and the videos published in it as a case study, this article seeks to reflect on the emergence and legacy of academic audiovisual dissemination. Anchoring academic video and audiovisual dissemination of knowledge in two critical traditions, documentary theory and semiotics, we will argue that academic video is in fact already present in a variety of academic disciplines, and that academic audiovisual essays are bringing trends and developments that have long been part of academic discourse to their logical conclusion.
Chauvet, Fabrice; Herrmann, Jeffrey W.; Proth, Jean-Marie
In this paper, the expression "production systems" refers to flow-shops, job-shops, assembly systems, Kanban systems and, in general, to any Discrete Event System (DES) which transforms raw material and/or components into products and/or components. Such a system is said to be cyclic if it provides indefinitely the same sequence of products. A schedule of a cyclic production system is defined as soon as the starting time of each operation on the related resource is known. It has been showed t...
Kämmerer, P W; Schneider, D; Pacyna, A A; Daubländer, M
The aim of the present study was an evaluation of movement during double aspiration by different manual syringes and one computer-controlled local anesthesia delivery system (C-CLAD). With five different devices (two disposable syringes (2, 5 ml), two aspirating syringes (active, passive), one C-CLAD), simulation of double aspiration in a phantom model was conducted. Two experienced and two inexperienced test persons carried out double aspiration with the injection systems at the right and left phantom mandibles in three different inclination angles (n = 24 × 5 × 2 for each system). 3D divergences of the needle between aspiration procedures (mm) were measured with two video cameras. An average movement for the 2-ml disposal syringe of 2.85 mm (SD 1.63), for the 5 ml syringe of 2.36 mm (SD 0.86), for the active-aspirating syringe of 2.45 mm (SD 0.9), for the passive-aspirating syringe of 2.01 mm (SD 0.7), and for the C-CLAD, an average movement of 0.91 mm (SD 0.63) was seen. The movement was significantly less for the C-CLAD compared to the other systems (p movement of the needle in the soft tissue was significantly less for the C-CLAD compared to the other systems (p movement of the syringe could be seen in comparison between manual and C-CLAD systems. Launching the aspiration by a foot pedal in computer-assisted anesthesia leads to a minor movement. To solve the problem of movement during aspiration with possibly increased false-negative results, a C-CLAD seems to be favorable.
Bornoe, Nis; Barkhuus, Louise
Microblogging is a recently popular phenomenon and with the increasing trend for video cameras to be built into mobile phones, a new type of microblogging has entered the arena of electronic communication: video microblogging. In this study we examine video microblogging, which is the broadcasting...... of short videos. A series of semi-structured interviews offers an understanding of why and how video microblogging is used and what the users post and broadcast....
David Vernon VIEIRA
Full Text Available Abstract The video production for learning has been evident over the last few years especially when it involves aspects of the application of hardware and software for automation spaces. In Librarianship Undergraduate Degrees the need for practical learning focused on the knowledge of the requirements for library automation demand on teacher to develop an educational content to enable the student to learn through videos in order to increase the knowledge about information technology. Thus, discusses the possibilities of learning through mobile devices in education reporting an experience that took place with students who entered in March, 2015 (2015.1 Bachelor Degree in Library Science from the Universidade Federal do Cariri (Federal University of Cariri in state of Ceará, Brazil. The literature review includes articles publicated in scientific journals and conference proceedings and books in English, Portuguese and Spanish on the subject. The methodology with quantitative and qualitative approach includes an exploratory study, where the data collection was used online survey to find out the experience of the elaboration of library automation videos by students who studied in that course. The learning experience using mobile devices for recording of technological environments of libraries allowed them to be produced 25 videos that contemplated aspects of library automation having these actively participated in production of the video and its publication on the Internet.
Hu, Jun-Mei; Wang, Xin-Jie
Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...
A. A. SHAFIE
Full Text Available Traffic signal light can be optimized using vehicle flow statistics obtained by Smart Video Surveillance Software (SVSS. This research focuses on efficient traffic control system by detecting and counting the vehicle numbers at various times and locations. At present, one of the biggest problems in the main city in any country is the traffic jam during office hour and office break hour. Sometimes it can be seen that the traffic signal green light is still ON even though there is no vehicle coming. Similarly, it is also observed that long queues of vehicles are waiting even though the road is empty due to traffic signal light selection without proper investigation on vehicle flow. This can be handled by adjusting the vehicle passing time implementing by our developed SVSS. A number of experiment results of vehicle flows are discussed in this research graphically in order to test the feasibility of the developed system. Finally, adoptive background model is proposed in SVSS in order to successfully detect target objects such as motor bike, car, bus, etc.
Full Text Available The scope of this paper is a video surveillance system constituted of three principal modules, segmentation module, vehicle classification and vehicle counting. The segmentation is based on a background subtraction by using the Codebooks method. This step aims to define the regions of interest associated with vehicles. To classify vehicles in their type, our system uses the histograms of oriented gradient followed by support vector machine. Counting and tracking vehicles will be the last task to be performed. The presence of partial occlusion involves the decrease of the accuracy of vehicle segmentation and classification, which directly impacts the robustness of a video surveillance system. Therefore, a novel method to handle the partial occlusions based on vehicle classification process have developed. The results achieved have shown that the accuracy of vehicle counting and classification exceeds the accuracy measured in some existing systems.
Full Text Available Abstract HD video applications can be represented with multiple tasks consisting of tightly coupled multiple threads. Each task requires massive computation, and their communication can be categorized as asynchronous distributed small data and large streaming data transfers. In this paper, we propose a high performance programmable video platform that consists of four processing element (PE clusters. Each PE cluster runs a task in the video application with RISC cores, a hardware operating system kernel (HOSK, and task-specific accelerators. PE clusters are connected with two separate point-to-point networks: one for asynchronous distributed controls and the other for heavy streaming data transfers among the tasks. Furthermore, we developed an application mapping framework, with which parallel executable codes can be obtained from a manually developed SystemC model of the target application without knowing the detailed architecture of the video platform. To show the effectivity of the platform and its mapping framework, we also present mapping results for an H.264/AVC 720p decoder/encoder and a VC-1 720p decoder with 30 fps, assuming that the platform operates at 200 MHz.
Moutakki Zakaria; Ouloul Imad Mohamed; Afdel Karim; Amghar Abdellah
The scope of this paper is a video surveillance system constituted of three principal modules, segmentation module, vehicle classification and vehicle counting. The segmentation is based on a background subtraction by using the Codebooks method. This step aims to define the regions of interest associated with vehicles. To classify vehicles in their type, our system uses the histograms of oriented gradient followed by support vector machine. Counting and tracking vehicles will be the last task...
This Web page describes the continuing effort to modernize the federal regulatory system for biotechnology products as well as clarify various roles of EPA, FDA and USDA in evaluating new biotechnology products.
Karlsson, Christer; Christensen, Irene
Production systems enabling both cost efficiency and flexibility in terms of high product variation are explored. The study follows an explorative longitudinal field study approach. The database consists of three large global corporations, each consisting of several companies producing household ...
This international bestseller and essential reference is the "bible" for digital video engineers and programmers worldwide. This is by far the most informative analog and digital video reference available, includes the hottest new trends and cutting-edge developments in the field. Video Demystified, Fourth Edition is a "one stop" reference guide for the various digital video technologies. The fourth edition is completely updated with all new chapters on MPEG-4, H.264, SDTV/HDTV, ATSC/DVB, and Streaming Video (Video over DSL, Ethernet, etc.), as well as discussions of the latest standards throughout. The accompanying CD-ROM is updated to include a unique set of video test files in the newest formats. *This essential reference is the "bible" for digital video engineers and programmers worldwide *Contains all new chapters on MPEG-4, H.264, SDTV/HDTV, ATSC/DVB, and Streaming Video *Completely revised with all the latest and most up-to-date industry standards.
Fernando, WAC; Canagarajah, CN; Bull, David
With the increase of digital technology in video production, several types of complex video special effects editing have begun to appear in video clips. In this paper we consider fade-out and fade-in special effects editing in MPEG-2 compressed video without full frame decompression and motion estimation. We estimated the DCT coefficients and use these coefficients together with the existing motion vectors to produce these special effects editing in compressed domain. Results show that both o...
Technology & Learning, 2008
More than ever, teachers are using digital video to enhance their lessons. In fact, the number of schools using video streaming increased from 30 percent to 45 percent between 2004 and 2006, according to Market Data Retrieval. Why the popularity? For starters, video-streaming products are easy to use. They allow teachers to punctuate lessons with…
Jalal, Ahmad; Kamal, Shaharyar; Kim, Daijin
Recent advancements in depth video sensors technologies have made human activity recognition (HAR) realizable for elderly monitoring applications. Although conventional HAR utilizes RGB video sensors, HAR could be greatly improved with depth video sensors which produce depth or distance information. In this paper, a depth-based life logging HAR system is designed to recognize the daily activities of elderly people and turn these environments into an intelligent living space. Initially, a depth imaging sensor is used to capture depth silhouettes. Based on these silhouettes, human skeletons with joint information are produced which are further used for activity recognition and generating their life logs. The life-logging system is divided into two processes. Firstly, the training system includes data collection using a depth camera, feature extraction and training for each activity via Hidden Markov Models. Secondly, after training, the recognition engine starts to recognize the learned activities and produces life logs. The system was evaluated using life logging features against principal component and independent component features and achieved satisfactory recognition rates against the conventional approaches. Experiments conducted on the smart indoor activity datasets and the MSRDailyActivity3D dataset show promising results. The proposed system is directly applicable to any elderly monitoring system, such as monitoring healthcare problems for elderly people, or examining the indoor activities of people at home, office or hospital.
Full Text Available The design of smart video surveillance systems is an active research field among the computer vision community because of their ability to perform automatic scene analysis by selecting and tracking the objects of interest. In this paper, we present the design and implementation of an FPGA-based standalone working prototype system for real-time tracking of an object of interest in live video streams for such systems. In addition to real-time tracking of the object of interest, the implemented system is also capable of providing purposive automatic camera movement (pan-tilt in the direction determined by movement of the tracked object. The complete system, including camera interface, DDR2 external memory interface controller, designed object tracking VLSI architecture, camera movement controller and display interface, has been implemented on the Xilinx ML510 (Virtex-5 FX130T FPGA Board. Our proposed, designed and implemented system robustly tracks the target object present in the scene in real time for standard PAL (720 × 576 resolution color video and automatically controls camera movement in the direction determined by the movement of the tracked object.
Fernández Gómez, Carlos; Martí Parreño, José
This research presents a work in progress aiming to map Spanish video games developers’ production in the area of mobile educational video games. A sample of 30 Spanish video games developers was analyzed in order to explore the weight that educational video games for mobile devices represents in their product portfolio. Primary findings suggest that Spanish video games developers’ production of educational video games for mobile devices is very scarce. While 23,3% of the analyzed video games...
Cai, Lecai; Xu, Jijia; Liangping, Jin; He, Zhiyong
Intelligent video tracking technology is the digital video processing and analysis of an important field of application in the civilian and military defense have a wide range of applications. In this paper, a systematic study on the surveillance video of the Smart in the agricultural tracking, particularly in target detection and tracking problem of the study, respectively for the static background of the video sequences of moving targets detection and tracking algorithm, the goal of agricultural production for rapid detection and tracking algorithm and Mean Shift-based translation and rotation of the target tracking algorithm. Experimental results show that the system can effectively and accurately track the target in the surveillance video. Therefore, in agriculture for the intelligent video surveillance tracking study, whether it is from the environmental protection or social security, economic efficiency point of view, are very meaningful.
In 2009, the Texas Transportation Institute produced for the Texas Department of Transportation a document : called Video over IP Design Guidebook. This report summarizes an implementation of that project in the : form of a workshop. The workshop was...
Pyles, Damiana Gibbons
An ethics of youth media production is the interplay of identities, media literacy, and modality that shape the environment within which young people produce media, yet how "voice" is fostered and/or constrained in these environments could still be explored more fully. This paper stems from a larger qualitative study of how youth created…
Gregorio, Massimo De
In this paper we present an intelligent active video surveillance system currently adopted in two different application domains: railway tunnels and outdoor storage areas. The system takes advantages of the integration of Artificial Neural Networks (ANN) and symbolic Artificial Intelligence (AI). This hybrid system is formed by virtual neural sensors (implemented as WiSARD-like systems) and BDI agents. The coupling of virtual neural sensors with symbolic reasoning for interpreting their outputs, makes this approach both very light from a computational and hardware point of view, and rather robust in performances. The system works on different scenarios and in difficult light conditions.
Ilgner, Justus; Park, Jonas Jae-Hyun; Labbé, Daniel; Westhofen, Martin
Introduction: While there is an increasing demand for minimally invasive operative techniques in Ear, Nose and Throat surgery, these operations are difficult to learn for junior doctors and demanding to supervise for experienced surgeons. The motivation for this study was to integrate high-definition (HD) stereoscopic video monitoring in microscopic surgery in order to facilitate teaching interaction between senior and junior surgeon. Material and methods: We attached a 1280x1024 HD stereo camera (TrueVisionSystems TM Inc., Santa Barbara, CA, USA) to an operating microscope (Zeiss ProMagis, Zeiss Co., Oberkochen, Germany), whose images were processed online by a PC workstation consisting of a dual IntelÂ® XeonÂ® CPU (Intel Co., Santa Clara, CA). The live image was displayed by two LCD projectors @ 1280x768 pixels on a 1,25m rear-projection screen by polarized filters. While the junior surgeon performed the surgical procedure based on the displayed stereoscopic image, all other participants (senior surgeon, nurse and medical students) shared the same stereoscopic image from the screen. Results: With the basic setup being performed only once on the day before surgery, fine adjustments required about 10 minutes extra during the operation schedule, which fitted into the time interval between patients and thus did not prolong operation times. As all relevant features of the operative field were demonstrated on one large screen, four major effects were obtained: A) Stereoscopy facilitated orientation for the junior surgeon as well as for medical students. B) The stereoscopic image served as an unequivocal guide for the senior surgeon to demonstrate the next surgical steps to the junior colleague. C) The theatre nurse shared the same image, anticipating the next instruments which were needed. D) Medical students instantly share the information given by all staff and the image, thus avoiding the need for an extra teaching session. Conclusion: High definition
Through a licensing agreement, Intergraph Government Solutions adapted a technology originally developed at NASA's Marshall Space Flight Center for enhanced video imaging by developing its Video Analyst(TM) System. Marshall's scientists developed the Video Image Stabilization and Registration (VISAR) technology to help FBI agents analyze video footage of the deadly 1996 Olympic Summer Games bombing in Atlanta, Georgia. VISAR technology enhanced nighttime videotapes made with hand-held camcorders, revealing important details about the explosion. Intergraph's Video Analyst System is a simple, effective, and affordable tool for video enhancement and analysis. The benefits associated with the Video Analyst System include support of full-resolution digital video, frame-by-frame analysis, and the ability to store analog video in digital format. Up to 12 hours of digital video can be stored and maintained for reliable footage analysis. The system also includes state-of-the-art features such as stabilization, image enhancement, and convolution to help improve the visibility of subjects in the video without altering underlying footage. Adaptable to many uses, Intergraph#s Video Analyst System meets the stringent demands of the law enforcement industry in the areas of surveillance, crime scene footage, sting operations, and dash-mounted video cameras.
Xie, Ruobing; Li, Li; Jin, Weiqi; Guo, Hong
It is prevalent for the low-light night-vision helmet to equip the binocular viewer with image intensifiers. Such equipment can not only acquire night vision ability, but also obtain the sense of stereo vision to achieve better perception and understanding of the visual field. However, since the image intensifier is for direct-observation, it is difficult to apply the modern image processing technology. As a result, developing digital video technology in night vision is of great significance. In this paper, we design a low-light night-vision helmet with digital imaging device. It consists of three parts: a set of two low-illumination CMOS cameras, a binocular OLED micro display and an image processing PCB. Stereopsis is achieved through the binocular OLED micro display. We choose Speed-Up Robust Feature (SURF) algorithm for image registration. Based on the image matching information and the cameras' calibration parameters, disparity can be calculated in real-time. We then elaborately derive the constraints of binocular stereo display. The sense of stereo vision can be obtained by dynamically adjusting the content of the binocular OLED micro display. There is sufficient space for function extensions in our system. The performance of this low-light night-vision helmet can be further enhanced in combination with The HDR technology and image fusion technology, etc.
Xu, Huihui; Jiang, Mingyan
Two-dimensional to three-dimensional (3-D) conversion in 3-D video applications has attracted great attention as it can alleviate the problem of stereoscopic content shortage. Depth estimation is an essential part of this conversion since the depth accuracy directly affects the quality of a stereoscopic image. In order to generate a perceptually reasonable depth map, a comprehensive depth estimation algorithm that considers the scenario type is presented. Based on the human visual system mechanism, which is sensitive to a change in the scenario, this study classifies the type of scenario into four classes according to the relationship between the movements of the camera and the object, and then leverages different strategies on the basis of the scenario type. The proposed strategies efficiently extract the depth information from different scenarios. In addition, the depth generation method for a scenario in which there is no motion, neither of the object nor the camera, is also suitable for the single image. Qualitative and quantitative evaluation results demonstrate that the proposed depth estimation algorithm is very effective for generating stereoscopic content and providing a realistic visual experience.
Mitani, Kohji; Sugawara, Masayuki; Shimamoto, Hiroshi; Yamashita, Takayuki; Okano, Fumio
An experimental ultrahigh-definition color video camera system with 7680(H) × 4320(V) pixels has been developed using four 8-million-pixel CCDs. The 8-million-pixel CCD with a progressive scanning rate of 60 frames per second has 4046(H) × 2048(V) effective imaging pixels, each of which is 8.4 micron2. We applied the four-imager pickup method to increase the camera"s resolution. This involves attaching four CCDs to a special color-separation prism. Two CCDs are used for the green image, and the other two are used for red and blue. The spatial image sampling pattern of these CCDs to the optical image is equivalent to one with 32 million pixels in the Bayer pattern color filter. The prototype camera attains a limiting resolution of more than 2700 TV lines both horizontally and vertically, which is higher than that of an 8-million-CCD. The sensitivity of the camera is 2000 lux, F 2.8 at approx. 50 dB of dark-noise level on the HDTV format. Its other specifications are a dynamic range of 200%, a power consumption of about 600 W and a weight, with lens, of 76 kg.
Clynick, Tony J.
A prototype laser video projector which uses electronic, optical, and mechanical means to project a television picture is described. With the primary goal of commercial viability, the price/performance ratio of the chosen means is critical. The fundamental requirement has been to achieve high brightness, high definition images of at least movie-theater size, at a cost comparable with other existing large-screen video projection technologies, while having the opportunity of developing and exploiting the unique properties of the laser projected image, such as its infinite depth-of-field. Two argon lasers are used in combination with a dye laser to achieve a range of colors which, despite not being identical to those of a CRT, prove to be subjectively acceptable. Acousto-optic modulation in combination with a rotary polygon scanner, digital video line stores, novel specialized electro-optics, and a galvanometric frame scanner form the basis of the projection technique achieving a 30 MHz video bandwidth, high- definition scan rates (1125/60 and 1250/50), high contrast ratio, and good optical efficiency. Auditorium projection of HDTV pictures wider than 20 meters are possible. Applications including 360 degree(s) projection and 3-D video provide further scope for exploitation of the HD laser video projector.
Onono, Joshua Orungo; Wieland, Barbara; Rushton, Jonathan
Cattle are kept as an important source of livelihood in many Kenyan farming households whilst also having cultural and social value. A review was undertaken to estimate productivity in the three main Kenyan cattle production systems: small-scale dairy and meat; small-scale dairy; and large-scale dairy and meat. Data on production parameters were collected through a systematic literature search of electronic databases for peer reviewed and grey literature. The parameters included were reproductive rates, mortality rates and yields. Prices for livestock and livestock products were estimated from markets. The data were used to estimate net output from cattle using the Livestock Productivity Efficiency Calculator (LPEC), a deterministic steady state model which measures productivity as net output per megajoule (MJ) of metabolisable energy (ME). The estimated net outputs per livestock unit year(-1) were USD 146.6, USD 215.1 and USD 84.8 in the large-scale dairy and meat, small-scale dairy and meat and small-scale dairy systems, respectively. Milk production contributed significantly to net output in all systems and was 91.8 % of total output in small-scale dairy. Cattle sales had the highest contribution to net output in large-scale dairy and meat system (45.1 %). Sensitivity analysis indicated that output was most affected by milk yield, age and weight at maturity and parturition rate. The productivity differences between the production systems call for more detailed research on the constraints to the production systems such as diseases, and to describe the benefits that farmers and society would obtain from disease control and improved management.
Klein, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kimpland, Robert Herbert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
The success of this theoretical undertaking provided confidence that the behavior of new and evolving designs of fissile solution systems may be accurately estimated. Scaled up versions of SUPO, subcritical acceleratordriven systems, and other evolutionary designs have been examined.
Angelina Sanderson Bellamy
.... This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals...
Chen, Michael J.; Rathke, Jerome W.
Ethanol is selectively produced from the reaction of methanol with carbon monoxide and hydrogen in the presence of a transition metal carbonyl catalyst. Methanol serves as a solvent and may be accompanied by a less volatile co-solvent. The solution includes the transition metal carbonyl catalysts and a basic metal salt such as an alkali metal or alkaline earth metal formate, carbonate or bicarbonate. A gas containing a high carbon monoxide to hydrogen ratio, as is present in a typical gasifer product, is contacted with the solution for the preferential production of ethanol with minimal water as a byproduct. Fractionation of the reaction solution provides substantially pure ethanol product and allows return of the catalysts for reuse.
Tan, Adrian; McAloone, Timothy Charles; Gall, Catherine
in the design and development aspects of PSS. The objective of this paper is to explore how a global manufacturing company is developing an offering to their customers that is focused on the utility of their products throughout their life time. The paper describes the process of how a company is shifting from...... of their products. This process of re-defining the value of what the company is actually offering to its customers is seen as a key element in PSS development. PSS development is expected to expand conventional product development in new directions, such as new activities, roles and responsibilities, knowledge...... and competencies, and value network relationships. The implications of this are discussed in relation to the company’s development approach....
National Aeronautics and Space Administration — The Integrated Mars In-Situ Propellant Production System (IMISPPS) is an end-to-end system that will produce rocket propellant on Mars from CO2 in the Martian...
Full Text Available We introduce a multimodal English-to-Japanese and Japanese-to-English translation system that also translates the speaker's speech motion by synchronizing it to the translated speech. This system also introduces both a face synthesis technique that can generate any viseme lip shape and a face tracking technique that can estimate the original position and rotation of a speaker's face in an image sequence. To retain the speaker's facial expression, we substitute only the speech organ's image with the synthesized one, which is made by a 3D wire-frame model that is adaptable to any speaker. Our approach provides translated image synthesis with an extremely small database. The tracking motion of the face from a video image is performed by template matching. In this system, the translation and rotation of the face are detected by using a 3D personal face model whose texture is captured from a video frame. We also propose a method to customize the personal face model by using our GUI tool. By combining these techniques and the translated voice synthesis technique, an automatic multimodal translation can be achieved that is suitable for video mail or automatic dubbing systems into other languages.
Monica Adams, head librarian at Robinson Secondary in Fairfax country, Virginia, states that librarians should have the technical knowledge to support projects related to digital video editing. The process of digital video editing and the cables, storage issues and the computer system with software is described.
Pedersen, Jørgen Lindgaard; Edwards, Kasper
Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...... with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance...
Full Text Available Introduction. The safety of vitamin K antagonists (VKA use can be compromised by many popular herbal supplements taken by individuals. The literature reports that 30% of warfarin-treated patients self-medicates with herbs. Possible interactions represent an health risk. We aimed to identify all herbs-oral anticoagulants interactions collected in the Italian database of suspected adverse reactions to “natural health” products. Methods. The Italian database of spontaneous reports of suspected adverse reactions to natural products was analyzed to address herb-VKAs interactions. Results. From 2002 to 2009, we identified 12 reports with 7 cases of INR reduction in patients treated with warfarin (n=3 and acenocoumarol (n=4, and 5 cases of INR increase (all warfarin associated. It was reported 8 different herbal products as possibly interacting. Discussion. Our study confirms the risk of interactions, highlighting the difficulty to characterize them and their mechanisms and, finally, prevent their onset. The reported data underline the urgent need of healthcare providers being aware of the possible interaction between natural products and VKA, also because of the critical clinical conditions affecting patients. This is the first step to have the best approach to understand possible INR alterations linked to herb-VKA interaction and to rightly educate patients in treatment with VKA.
Hsuan, Juliana; McAloone, Tim C.; Neugebauer, Line
We apply a management tool to classify different integrated PSS within the context of Danish maritime industry. We investigate how a firm should organize its operations to manage the transition from being a manufacturing to a servitizing company, and to provide a guideline for strategic positioni...... and planning of the balance between product sales and service activities....
models of aquacultural production systems with the aim of adopting a suitable one for predicting the environment, .... cultured organisms. Thus, production is easily modeled as the sum of the weights of each surviving fish or the product of the average weight of the fish and the ..... for the effects by consumption of released.
Post, R.A.G.; Da Silva Cardozo, O.; Hekkert, P.P.M.
Aesthetic appreciation affects the success of products in a number of areas, such as user satisfaction and usability. Hence, designers apply aesthetic principles to create more successful products. However, it is still unclear how such principles apply to the services and systems that products are
Wang, Shuangbao; Kelly, William
In this paper, we present a novel system, inVideo, for video data analytics, and its use in transforming linear videos into interactive learning objects. InVideo is able to analyze video content automatically without the need for initial viewing by a human. Using a highly efficient video indexing engine we developed, the system is able to analyze…
Wilson, Rhoda M.
Human Systems Integration Report Low back pain (LBP) and work-related musculoskeletal disorders (WMSDs) can lead to employee absenteeism, sick leave, and permanent disability. Over the years, much work has been done in examining physical exposure to ergonomic risks. The current research presents a new approach for assessing WMSD risk during lifting related tasks that combines traditional observational methods with video recording methods. One particular application area, the Future Com...
Ding, Yi; Østergaard, Jacob; Peng, Wang
A photovoltaic (PV) system consists of many solar panels, which are connected in series, parallel or a combination of both. Energy production for the PV system with various configurations is different. In this paper, a methodology is developed to evaluate and analyze the expected energy production...
Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik
This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...
Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui
Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes
de Barcellos, Marcia Dutra; Grunert, Klaus G.; Zhou, Y.
In many countries consumers have shown an increasing interest to the way in which food products are being produced. This study investigates Chinese consumers’ attitudes towards different pig production systems by means of a conjoint analysis. While there has been a range of studies on Western con...... of rural and environmental development, quality aspects, and food safety measures are challenges that must be met by the stakeholders of pig production systems in China....
Full Text Available Dual-mode wireless video transmission has two major problems. Firstly, one is time delay difference bringing about asynchronous reception decoding frame error phenomenon; secondly, dual-mode network bandwidth inconformity causes scheduling problem. In order to solve above two problems, a kind of TD-SCDMA/CDMA20001x dual-mode wireless video transmission design method is proposed. For the solution of decoding frame error phenomenon, the design puts forward adding frame identification and packet preprocessing at the sending and synchronizing combination at the receiving end. For the solution of scheduling problem, the wireless communication channel cooperative work and video data transmission scheduling management algorithm is proposed in the design.
Valli, D.; Ganesan, K.
Chaos based cryptosystems are an efficient method to deal with improved speed and highly secured multimedia encryption because of its elegant features, such as randomness, mixing, ergodicity, sensitivity to initial conditions and control parameters. In this paper, two chaos based cryptosystems are proposed: one is the higher-dimensional 12D chaotic map and the other is based on the Ikeda delay differential equation (DDE) suitable for designing a real-time secure symmetric video encryption scheme. These encryption schemes employ a substitution box (S-box) to diffuse the relationship between pixels of plain video and cipher video along with the diffusion of current input pixel with the previous cipher pixel, called cipher block chaining (CBC). The proposed method enhances the robustness against statistical, differential and chosen/known plain text attacks. Detailed analysis is carried out in this paper to demonstrate the security and uniqueness of the proposed scheme.
Naito, Hiromichi; Guyette, Francis X; Martin-Gill, Christian; Callaway, Clifton W
Video laryngoscopy (VL) is a technical adjunct to facilitate endotracheal intubation (ETI). VL also provides objective data for training and quality improvement, allowing evaluation of the technique and airway conditions during ETI. Previous studies of factors associated with ETI success or failure are limited by insufficient nomenclature, individual recall bias and self-report. We tested whether the covariates in prehospital VL recorded data were associated with ETI success. We also measured association between time and clinical variables. Retrospective review was conducted in a non-physician staffed helicopter emergency medical service system. ETI was typically performed using sedation and neuromuscular-blockade under protocolized orders. We obtained process and outcome variables from digitally recorded VL data. Patient characteristics data were also obtained from the emergency medical service record and linked to the VL recorded data. The primary outcome was to identify VL covariates associated with successful ETI attempts. Among 304 VL recorded ETI attempts in 268 patients, ETI succeeded for 244 attempts and failed for 60 attempts (first-pass success rate, 82% and overall success rate, 94%). Laryngoscope blade tip usually moved from a shallow position in the oropharynx to the vallecula. In the multivariable logistic regression analysis, attempt time (p = 0.02; odds ratio [OR] 0.99), Cormack-Lehane view (p Cormack-Lehane view, and longer ETI attempt time were negatively associated with successful ETI attempts. Initially shallow blade tip position may associate with longer ETI time. VL is useful for measuring and describing multiple factors of ETI and can provide valuable data.
K. L. Smith; M. E. Leveque
This report includes technical progress made during the period October, 2002 through September, 2003. At the end of the second technical progress report, the ConocoPhillips opportunities to apply subsea processing in the Gulf of Mexico had been exhausted, and an alternative site was identified in Norway. This was a non-ConocoPhillips operated field, and the subsea processing was proposed as a phased development approach with 2-phase separation at the field, and then gas and liquids exported via pipeline to remote platform locations for processing. Although the unrisked economics were quite favorable, the risked economic evaluation compelled the operator to develop the field with the more conventional and proven Floating Production, Storage and Offloading (FPSO) option. Work on the subsea processing was suspended at this time. Discussions with DOE regarding two other step-change deepwater technologies ensued. One was an effort to develop a light-weight, high pressure composite production riser. A field demonstration of the design would then be performed by deploying a limited number of composite joints in a Gulf of Mexico deepwater development. The other was to begin the process of taking drilling with casing technology to the deepwater. This is called, ''close-tolerance liner drilling''. It was agreed that both technologies should be pursued, and the work began. During this reporting period, the initial production riser design had been completed and preliminary test sample components were being fabricated. Regarding the liner drilling, the sub-contractors were selected, the design basis was agreed and designs progressed towards meeting a projected first quarter, 2004 onshore test program.
Full Text Available Integrated monitoring system for discrete manufacturing processes is presented in the paper. The multilayer hardware and software reference model was developed. Original research are an answer for industry needs of the integration of information flow in production process. Reference model corresponds with proposed data model based on multilayer data tree allowing to describe orders, products, processes and save monitoring data. Elaborated models were implemented in the integrated monitoring system demonstrator developed in the project. It was built on the base of multiagent technology to assure high flexibility and openness on applying intelligent algorithms for data processing. Currently on the base of achieved experience an application integrated monitoring system for real production system is developed. In the article the main problems of monitoring integration are presented, including specificity of discrete production, data processing and future application of Cyber-Physical-Systems. Development of manufacturing systems is based more and more on taking an advantage of applying intelligent solutions into machine and production process control and monitoring. Connection of technical systems, machine tools and manufacturing processes monitoring with advanced information processing seems to be one of the most important areas of near future development. It will play important role in efficient operation and competitiveness of the whole production system. It is also important area of applying in the future Cyber-Physical-Systems that can radically improve functionally of monitoring systems and reduce the cost of its implementation.
Bales, John W.
The F64 frame grabber is a high performance video image acquisition and processing board utilizing the TMS320C40 and TMS34020 processors. The hardware is designed for the ISA 16 bit bus and supports multiple digital or analog cameras. It has an acquisition rate of 40 million pixels per second, with a variable sampling frequency of 510 kHz to MO MHz. The board has a 4MB frame buffer memory expandable to 32 MB, and has a simultaneous acquisition and processing capability. It supports both VGA and RGB displays, and accepts all analog and digital video input standards.
Johnson, Don; Johnson, Mike
The process of digital capture, editing, and archiving video has become an important aspect of documenting arthroscopic surgery. Recording the arthroscopic findings before and after surgery is an essential part of the patient's medical record. The hardware and software has become more reasonable to purchase, but the learning curve to master the software is steep. Digital video is captured at the time of arthroscopy to a hard disk, and written to a CD at the end of the operative procedure. The process of obtaining video of open procedures is more complex. Outside video of the procedure is recorded on digital tape with a digital video camera. The camera must be plugged into a computer to capture the video on the hard disk. Adobe Premiere software is used to edit the video and render the finished video to the hard drive. This finished video is burned onto a CD. We outline the choice of computer hardware and software for the manipulation of digital video. The techniques of backup and archiving the completed projects and files also are outlined. The uses of digital video for education and the formats that can be used in PowerPoint presentations are discussed.
Gunay, Omer; Ozsarac, Ismail; Kamisli, Fatih
Video recording is an essential property of new generation military imaging systems. Playback of the stored video on the same device is also desirable as it provides several operational benefits to end users. Two very important constraints for many military imaging systems, especially for hand-held devices and thermal weapon sights, are power consumption and size. To meet these constraints, it is essential to perform most of the processing applied to the video signal, such as preprocessing, compression, storing, decoding, playback and other system functions on a single programmable chip, such as FPGA, DSP, GPU or ASIC. In this work, H.264/AVC (Advanced Video Coding) compatible video compression, storage, decoding and playback blocks are efficiently designed and implemented on FPGA platforms using FPGA fabric and Altera NIOS II soft processor. Many subblocks that are used in video encoding are also used during video decoding in order to save FPGA resources and power. Computationally complex blocks are designed using FPGA fabric, while blocks such as SD card write/read, H.264 syntax decoding and CAVLC decoding are done using NIOS processor to benefit from software flexibility. In addition, to keep power consumption low, the system was designed to require limited external memory access. The design was tested using 640x480 25 fps thermal camera on CYCLONE V FPGA, which is the ALTERA's lowest power FPGA family, and consumes lower than 40% of CYCLONE V 5CEFA7 FPGA resources on average.
Kim, Dohyun; Alexoff, David; Kim, Sung Won; Hooker, Jacob; Ferrieri, Richard A
A method for providing .sup.11C-labeled cyanides from .sup.11C labeled oxides in a target gas stream retrieved from an irradiated high pressure gaseous target containing O.sub.2 is provided, wherein .sup.11C labeled oxides are reduced with H.sub.2 in the presence of a nickel catalyst under a pressure and a temperature sufficient to form a product stream comprising at least about 95% .sup.11CH.sup.4 , the .sup.11CH.sub.4 is then combined with an excess of NH.sub.3 in a carrier/reaction stream flowing at an accelerated velocity and the combined .sup.11CH4 carrier/reaction stream is then contacted with a platinum (Pt) catalyst particulate supported on a substantially-chemically-nonreactive heat-stable support at a temperature of at least about 900 .degree. C., whereby a product stream comprising at least about 60%H.sup.11CN is provided in less than 10 minutes from retrieval of the .sup.11C labeled oxide.
Kim, Dohyun; Alexoff, David; Kim, Sung Won; Hooker, Jacob M.; Ferrieri, Richard A.
A method for providing .sup.11C-labeled cyanides from .sup.11C labeled oxides in a target gas stream retrieved from an irradiated high pressure gaseous target containing O.sub.2, wherein .sup.11C labeled oxides are reduced with H.sub.2 in the presence of a nickel catalyst under a pressure and a temperature sufficient to form a product stream comprising at least about 95% .sup.11CH.sub.4, the .sup.11CH.sub.4 is then combined with an excess of NH.sub.3 in a carrier/reaction stream flowing at an accelerated velocity and the combined .sup.11CH4 carrier/reaction stream is then contacted with a platinum (Pt) catalyst particulate supported on a substantially-chemically-nonreactive heat-stable support at a temperature of at least about 900.degree. C., whereby a product stream comprising at least about 60% H.sup.11CN is provided in less than 10 minutes from retrieval of the .sup.11C labeled oxide.
Chen, Liang; Zhou, Yipeng; Chiu, Dah Ming
Bandwidth consumption is a significant concern for online video service providers. Practical video streaming systems usually use some form of HTTP streaming (progressive download) to let users download the video at a faster rate than the video bitrate. Since users may quit before viewing the complete video, however, much of the downloaded video will be "wasted". To the extent that users' departure behavior can be predicted, we develop smart streaming that can be used to improve user QoE with ...
Darabi, K; G. Ghinea
In this paper an expert-based model for generation of personalized video summaries is suggested. The video frames are initially scored and annotated by multiple video experts. Thereafter, the scores for the video segments that have been assigned the higher priorities by end users will be upgraded. Considering the required summary length, the highest scored video frames will be inserted into a personalized final summary. For evaluation purposes, the video summaries generated by our system have...
Strid Eriksson, Ingrid
The aim of this thesis was to develop the SALSA models (Systems AnaLysis for Sustainable Agriculture), and to apply them to studies for the benefit of more sustainable pig production. Within the framework of environmental systems analysis, the SALSA models were constructed as substance and energy flow models using life cycle assessment methodology for impact assessment and scope definition. The pig production system studied included rearing of growing-finishing pigs (SALSA-pig model) and prod...
Full Text Available The paper presents the technology and organization of the artistic cast production. On the basis of the actual cast production system, the manufacturing process was shown, in particular sand–piece moulding, which is a very important process and a time-consuming part of the entire manufacture of the casts. The current state of the production process as well as the organization of the work and production technology were analysed with the use of methods and techniques of production improvement, the Lean Manufacturing concept and computer systems. The results of the analysis and studies were shown with use of schemes and graphs of the layout of the production resources, a flow chart of the production process, value stream mapping, and a costs table for the production and modernization of the moulding stage. The work has shown that there are possibilities to improve the artistic cast production system. This improvement leads to increased productivity, lower production costs of artistic casts and increased competitiveness of the foundry.
context. This paper describes a curricular activity focused on the definition of methodologies for designing in a systemic context. using examples from students’ projects. For a semester students had to focus on a project of a PSS, borrowing and re-adapting methods from other disciplines with the purpose...
context. This paper describes a curricular activity focused on the definition of methodologies for designing in a systemic context. using examples from students? projects. For a semester students had to focus on a project of a PSS, borrowing and re-adapting methods from other disciplines with the purpose...
In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.
U.S. Geological Survey, Department of the Interior — These data are the trackline from the seafloor photograph and video survey conducted September 2004 using the mini-SeaBOSS sampling system on the R/V Rafael in...
Ridgway, James; Stannett, Mike
Although techniques for separate image and audio steganography are widely known, relatively little has been described concerning the hiding of information within video streams ("video steganography"). In this paper we review the current state of the art in this field, and describe the key issues we have encountered in developing a practical video steganography system. A supporting video is also available online at http://www.youtube.com/watch?v=YhnlHmZolRM
Jensen, Per Langå; Broberg, Ole
In order to integrate ergonomic aspects into the design of products and production systems many tools and procedures are available. For the ergonomists, however, it is a question of recognizing the organizational context and the role to play for making integration possible. Based on an understand......In order to integrate ergonomic aspects into the design of products and production systems many tools and procedures are available. For the ergonomists, however, it is a question of recognizing the organizational context and the role to play for making integration possible. Based...
Full Text Available Vision-based monitoring systems using visible spectrum (regular video cameras can complement or substitute conventional sensors and provide rich positional and classification data. Although new camera technologies, including thermal video sensors, may improve the performance of digital video-based sensors, their performance under various conditions has rarely been evaluated at multimodal facilities. The purpose of this research is to integrate existing computer vision methods for automated data collection and evaluate the detection, classification, and speed measurement performance of thermal video sensors under varying lighting and temperature conditions. Thermal and regular video data was collected simultaneously under different conditions across multiple sites. Although the regular video sensor narrowly outperformed the thermal sensor during daytime, the performance of the thermal sensor is significantly better for low visibility and shadow conditions, particularly for pedestrians and cyclists. Retraining the algorithm on thermal data yielded an improvement in the global accuracy of 48%. Thermal speed measurements were consistently more accurate than for the regular video at daytime and nighttime. Thermal video is insensitive to lighting interference and pavement temperature, solves issues associated with visible light cameras for traffic data collection, and offers other benefits such as privacy, insensitivity to glare, storage space, and lower processing requirements.
Squire, Kurt D.
Recently, attention has been paid to computer and video games as a medium for learning. This article provides a way of conceptualizing them as possibility spaces for learning. It provides an overview of two research programs: (1) an after-school program using commercial games to develop deep expertise in game play and game creation, and (2) an…
Jahn, H.; Oertel, D.
The present analysis deals with the influence of the videochannel harmonic response characteristic of a push-broom scanner on the spatial transmission function and the signal-to-noise ratio. It is shown that when detector noise is prevalent, the video frequency bandwidth influences both the transmission function and the SNR, but influences only the transmission function when the photonoise prevails.
of the rela-tionship between variables associated with configuration of modular product families and the interacting assembly system. One core result is the development of a system model based on the longitudinal case study incorporating both structural and performance elements. Based on the system model...... a number of theoretical and managerial implications are identified. From a management point of view, the most im-portant finding is that modularization needs to be configured for the two competitive situations, i.e. 1) the volume flexible configuration focusing on generational product variety and 2...... one important contribution to the understanding and utilization of product modularization....
Sendra, Sandra; Lloret, Jaime; Jimenez, Jose Miguel; Rodrigues, Joel J P C
Video surveillance is needed to control many activities performed in underwater environments. The use of wired media can be a problem since the material specially designed for underwater environments is very expensive. In order to transmit the images and videos wirelessly under water, three main technologies can be used: acoustic waves, which do not provide high bandwidth, optical signals, although the effect of light dispersion in water severely penalizes the transmitted signals and therefore, despite offering high transfer rates, the maximum distance is very small, and electromagnetic (EM) waves, which can provide enough bandwidth for video delivery. In the cases where the distance between transmitter and receiver is short, the use of EM waves would be an interesting option since they provide high enough data transfer rates to transmit videos with high resolution. This paper presents a practical study of the behavior of EM waves at 2.4 GHz in freshwater underwater environments. First, we discuss the minimum requirements of a network to allow video delivery. From these results, we measure the maximum distance between nodes and the round trip time (RTT) value depending on several parameters such as data transfer rate, signal modulations, working frequency, and water temperature. The results are statistically analyzed to determine their relation. Finally, the EM waves' behavior is modeled by a set of equations. The results show that there are some combinations of working frequency, modulation, transfer rate and temperature that offer better results than others. Our work shows that short communication distances with high data transfer rates is feasible.
Full Text Available Video surveillance is needed to control many activities performed in underwater environments. The use of wired media can be a problem since the material specially designed for underwater environments is very expensive. In order to transmit the images and videos wirelessly under water, three main technologies can be used: acoustic waves, which do not provide high bandwidth, optical signals, although the effect of light dispersion in water severely penalizes the transmitted signals and therefore, despite offering high transfer rates, the maximum distance is very small, and electromagnetic (EM waves, which can provide enough bandwidth for video delivery. In the cases where the distance between transmitter and receiver is short, the use of EM waves would be an interesting option since they provide high enough data transfer rates to transmit videos with high resolution. This paper presents a practical study of the behavior of EM waves at 2.4 GHz in freshwater underwater environments. First, we discuss the minimum requirements of a network to allow video delivery. From these results, we measure the maximum distance between nodes and the round trip time (RTT value depending on several parameters such as data transfer rate, signal modulations, working frequency, and water temperature. The results are statistically analyzed to determine their relation. Finally, the EM waves’ behavior is modeled by a set of equations. The results show that there are some combinations of working frequency, modulation, transfer rate and temperature that offer better results than others. Our work shows that short communication distances with high data transfer rates is feasible.
Seddon, John; Caulkin, Simon
Systems thinking underpins "lean" management and is best understood through action-learning as the ideas are counter-intuitive. The Toyota Production System is just that--a system; the failure to appreciate that starting-place and the advocacy of "tools" leads many to fail to grasp what is, without doubt, a significant…
In this paper we present an automatic enhanced video display and navigation capability for networked streaming video and networked video playlists. Our proposed method uses Synchronized Multimedia Integration Language (SMIL) as presentation language and Real Time Streaming Protocol (RTSP) as network remote control protocol to automatically generate a "enhanced video strip" display for easy navigation. We propose and describe two approaches - a smart client approach and a smart server approach. We also describe a prototype system implementation of our proposed approach.
Ferraz, José Bento Sterman; Felício, Pedro Eduardo de
Important information about the Brazilian agribusiness, population and economy are presented in this paper, as well as details of beef production, market, industry and production system, to inform people involved in meat industry about details on demography, production, economy and production systems of a country that is the largest player in beef exports in the world and that uses, mostly, Bos indicus based bovine population, reared under pasture conditions, for meat production purposes. Herd size, genetic evaluation programs, quantity of beef produced and market is informed, with figures about the global and major players' production. Some discussion related to environmental concerns, methane emission and carbon fixation is also presented, as well as meat quality. Meat quality of fed animals is also compared with beef from animals that are raised in pasture conditions.
Luposchainsky, David; Hinrichsen, Haye
We propose an alternative method to compute the entropy production of a classical underdamped nonequilibrium system in a continuous phase space. This approach has the advantage that it is not necessary to distinguish between even and odd-parity variables. We show that the method leads to the same local entropy production as in previous studies while the differential entropy production along a stochastic trajectory turns out to be different. This demonstrates that the differential entropy prod...
D. A. Volkov
Full Text Available Gating systems of the first group of special ways of casting into shell molds, casting in lined chill mold as more effective for production of hydrodistributors were developed and studied.
U.S. Environmental Protection Agency — The High Production Volume Information System (HPVIS) provides access to select health and environmental effect information on chemicals that are manufactured in...
Publications on pig production and cysticercosis in The Gambia and Senegal are very scant. Hence, this survey was implemented to characterise the pig production systems and marketing chain, and to assess people's awareness of cysticercosis. The survey sites were Western region and Kanifing Municipality of The ...
Klein, De Cecile A.M.; Monaghan, Ross M.; Alfaro, Marta A.; Gourley, Cameron J.P.; Oenema, Oene; Mark Powell, J.
Nitrogen (N) is invaluable for maintaining agricultural production, but its use, and particularly inefficient use, can lead to environmental losses. This paper reviews N use efficiency (NUE) and N surplus indicators for dairy production systems to assess their utility for optimising N use outcomes
Racca, Roberto G.; Scotten, Larry N.
This article describes a method that allows the digital recording of sequences of three black and white images at rates of several thousand frames per second using a system consisting of an ordinary CCD camcorder, three flash units with color filters, a PC-based frame grabber board and some additional electronics. The maximum framing rate is determined by the duration of the flashtube emission, and for common photographic flash units lasting about 20 microsecond(s) it can exceed 10,000 frames per second in actual use. The subject under study is strobe- illuminated using a red, a green and a blue flash unit controlled by a special sequencer, and the three images are captured by a color CCD camera on a single video field. Color is used as the distinguishing parameter that allows the overlaid exposures to be resolved. The video output for that particular field will contain three individual scenes, one for each primary color component, which potentially can be resolved with no crosstalk between them. The output is electronically decoded into the primary color channels, frame grabbed and stored into digital memory, yielding three time-resolved images of the subject. A synchronization pulse provided by the flash sequencer triggers the frame grabbing so that the correct video field is acquired. A scheme involving the use of videotape as intermediate storage allows the frame grabbing to be performed using a monochrome video digitizer. Ideally each flash- illuminated scene would be confined to one color channel, but in practice various factors, both optical and electronic, affect color separation. Correction equations have been derived that counteract these effects in the digitized images and minimize 'ghosting' between frames. Once the appropriate coefficients have been established through a calibration procedure that needs to be performed only once for a given configuration of the equipment, the correction process is carried out transparently in software every time a
North, Nicola; Hughes, Frances
Recent New Zealand reports have identified the nursing workforce for its potential to make a significant contribution to increased productivity in health services. The purpose of this paper is to review critically the recent and current labour approaches to improve nursing productivity in New Zealand, in a context of international research and experience. An examination of government documents regarding productivity, and a review of New Zealand and international literature and research on nursing productivity and its measurement form the basis of the paper. It is found that productivity improvement strategies are influenced by theories of labour economics and scientific management that conceptualise a nurse as a labour unit and a cost to the organisation. Nursing productivity rose significantly with the health reforms of the 1990s that reduced nursing input costs but impacts on patient safety and nurses were negative. Current approaches to increasing nursing productivity, including the "productive ward" and reconfiguration of nursing teams, also draw on manufacturing innovations. Emerging thinking considers productivity in the context of the work environment and changing professional roles, and proposes reconceptualising the nurse as an intellectual asset to knowledge-intensive health organisations. Strategies that take a systems approach to nursing productivity, that view nursing as a capital asset, that focus on the interface between nurse and working environment and measure patient and nurse outcomes are advocated. The paper shows that reframing nursing productivity brings into focus management strategies to raise productivity while protecting nursing and patient outcomes.
This thesis is based on a detailed analysis of various topics related to the question of whether video games can be art. In the first place it analyzes the current academic discussion on this subject and confronts different opinions of both supporters and objectors of the idea, that video games can be a full-fledged art form. The second point of this paper is to analyze the properties, that are inherent to video games, in order to find the reason, why cultural elite considers video games as i...
Full Text Available Video Tracking is one of the processes in video postproduction and motion picture digitally. The ability of video tracking method in the production is helpful to realize the concept of the visual. It is considered in the process of visual effects making. This paper presents how the tracking process and its benefits in visual needs, especially for video and motion picture production. Some of the things involved in the process of tracking such as failure to do so are made clear in this discussion.
Conrad, Finn; Sørensen, Torben
-tool concept for modelling, simulation and design of mechatronic products and systems is proposed in this paper. It built on results from a Danish mechatronic research program on intelligent motion control as well as from the Esprit project SWING on IT-tools for rapid prototyping of fluid power components...... and systems. A mechatronic test facility for a hydraulic robot and a CNC XY-machine table was implemented. The controller use digital signal processors (DSPs). The DSP controller utilizes the dSPACE System suitable for real-time experimentation, evaluation and validation....
Van Reeth, Frank; Raymaekers, Chris; TREKELS, Peter; VERKOYEN, Stefan; FLERACKERS, Eddy
Conventional educational material is even more complemented with computer-based multimedia material. In order to make this material available to teachers and students in a structured manner, we developed a multimedia database and accompanying tools for creating, manipulating and formatting the teaching content. Recently, we expanded this educational multimedia database with the functionality to support streamed video as well. Given the vast amounts of data that needs to be stored and transmi...
Tosteberg, Joakim; Axelsson, Thomas
A team of developers from Epsilon AB has developed a lightweight remote controlledquadcopter named Crazyflie. The team wants to allow a pilot to navigate thequadcopter using video from an on-board camera as the only guidance. The masterthesis evaluates the feasibility of mounting a camera module on the quadcopter andstreaming images from the camera to a computer, using the existing quadcopterradio link. Using theoretical calculations and measurements, a set of requirementsthat must be fulfill...
In conventional electronic video stabilization, the stabilized frame is obtained by cropping the input frame to cancel camera shake. While a small cropping size results in strong stabilization, it does not provide us satisfactory results from the viewpoint of image quality, because it narrows the angle of view. By fusing several frames, we can effectively expand the area of input frames, and achieve strong stabilization even with a large cropping size. Several methods for doing so have been s...
Yurmanov, V.A.; Velikopolsky, S.V.; Yurmanov, E.V. [N.A. Dollezhal Research and Development Inst. of Power Engineering (NIKIET), Moscow (Russian Federation)
Accumulation of corrosion products lead to some problems during long-term operation of VVER plants, such as secondary system component degradation including crud-induced local corrosion and corrosion cracking. Corrosion sludge and deposit removal from steam generators and other equipment is costly and time-consuming and leads to additional waste production. This problem is vital in the case of plant life extension. Appropriate solutions of the problem could be developed based on both Russian and international experience of the VVER fleet. Recommendations on how to mitigate corrosion product accumulation in VVER secondary systems were developed based on comparative analysis of available long-term data on corrosion product behavior in all the operating VVER plants, such as the following: Sludge and deposit accumulation in inner surfaces of secondary piping and components; Corrosion rate measurements using in-situ specimen testing at operated VVER plants; Efficiency of corrosion product removal from secondary system water by means of condensate polishers and steam generator blowdown cleanup systems; Sludge and deposit removal from steam generators during chemical cleaning; Secondary piping and components conservation efficiency during long outages. Comparative data analysis of corrosion product behavior has shown different corrosion product accumulation rates in Novovoronezh, Kola, Kalinin, Balakovo and Rostov NPPs. The said difference is due to different design and operation peculiarities. (author)
Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf
(PDM) and product lifecycle management (PLM) systems offer support by automating and managing some of the operational complexity of modular design activities. PLM system tools are used for handling a variety of product definitions, to manage workflow of development activities, and to measure relational......A modular design strategy both enables, but also demands, parallelism in design activities and collaboration between a diversity of disciplines in companies, which often involves supporting computer-based tools for enhancing interaction, design management, and communication. Product data management...... properties such as cost and performance. Companies often use a PLM tool for management of CAD files, documents, and drawings, but they do not take advantage of the full potential of the PLM system to support the development activities of modular product designs. The key result of this paper...
The main objective of this thesis is to investigate the phenomenon of product modularization as an apparently both powerful and complex means. The focal research objective is to obtain an improved insight and understanding of the relationship between variables associated with configuration...... of modular product families and the interacting assembly system. The thesis reviews extant theory and provides various classifications and discussions guided by the overall theme of product modularity and assembly systems. The empirical system analysis, based upon a longitudinal single case study...... of theoretical and managerial implications are identified. From a management point of view, the most important finding is that modularization needs to be configured for two competitive situations, i.e. the volume flexible configuration focusing on generational product variety and the mix flexible configuration...
Full Text Available The aim of this work is to assess the flexibility of production allowed by extensive production conditions faced with variations in the environment, i.e., market variations and climatic fluctuations, of Limousin beef systems. The study used a case-based methodology in which seven beef farms with less than 1 LU/ha were chosen. Data collection was based on three interviews using a semistructured questionnaire and on the analysis of productive and economic results over a 15-year period (1991-2005. The main evolution of these farms is related to a rise in work productivity associated with an increase in herd size. Herd increase was made possible by enlarging the area, the margin of intensification being limited in these regions. To take advantage of the enlarged land area, females were reared for fattening or for reproduction instead of selling them at weaning. The Limousin female provides a wide product mix because of its plasticity, as has been studied by several researchers. This mix flexibility is achieved by delaying product differentiation, a form of production flexibility that can reduce the risk of under-producing or over-producing varied product configurations. On the other hand, calves sold to the Italian market after weaning are generic products, associated with a flexible production process to overcome fluctuations in forage availability due to climatic variations. The introduction of maize silage for feeding acts as an alternative route, actual and potential, through the system to overcome unexpected forage shortage from natural grasslands as a result of droughts. The study shows that extensive farming systems have developed types of flexibility to match different factors of uncertainty from the environment. Finally, the issue of farm system performance is thus not so much a question of whether a farm is fit at a specific moment in time, but whether it transforms into a less or more sustainable orientation.
Becchetti, T.; Stackhouse, J.; Snell, L.; Lile, D.; George, H.; Harper, J. M.; Larson, S.; Mashiri, F.; Doran, M.; Barry, S.
Livestock production systems vary greatly over the world. Producers try to match the resources they have with the demands of production, this can vary by species, class of animal, number of animals, and production goals, etc. Using California's diversity in production systems as an example, we explored how livestock producers best utilize the forage and feed found in different ecosystems and available in different parts of the state. Livestock grazing, the predominant land use in California and in much of the world, makes efficient use of the natural vegetation produced without additional water (irrigation), minimal inputs such as fertilizer while often supporting a variety of conservation objectives including vegetation management, fire fuels management, and habitat and open space conservation. The numerous by-products produced by other sectors of California's agriculture as well as food industries, such as brewer's grain, cottonseeds, and almond hulls are utilized as a feed source for livestock. These by-products are not only an important feed source especially in drought years but are diverted from our waste stream when utilized by livestock. The concept of matching available resources to livestock needs throughout the world is often overlooked and production systems are often over simplified in projects conducting a life cycle analysis or developing carbon foot prints for livestock production systems. This paper provides details on the various production systems found in California, the ecosystem they have adapted to, and how the producers use science and ecological knowledge to match the biological requirements of the livestock and conservation objectives to feed and forage resources.
Ioan Constantin Dima; Codruţa Dura
The expert system aiming the moulded pieces production management improving is designed to assist maintenance and operation personal in the process of diagnosis of complex defects which may appear during the technological process, but the system must also contribute to technical measurements adopted after these distortions have emerged
Sweetpotato is an important food security crop in Tanzania. The crop is grown under diverse farming systems with very low yields. The objective of this study was to assess the present sweetpotato farming systems, farmers' preferences, production constraints and breeding priorities in eastern Tanzania. Participatory rural ...
Full Text Available Flexible production system is a complex whole that raise some issues in terms of its design and in relation to the conditions for implementing it. To implement a flexible production system configuration must be found that satisfies both economic and system performance requirements. The configuration which best meet the objectives of introducing a flexible production system must be sought in the set of alternatives defined and evaluated. In this paper we present a methodology of realising the configuration and complex evaluation of the analyzed system. It will be developed models which generate new alternative configurations, optimization and evaluation models of the performance of the flexible production system. This will create a framework for interactive decision support, user-oriented that can be used by management to solve this selection problem. The applicative character of the study consist in tracking of the technological process in real time using the developed software package on the designed system, based on mathematical models for configuration and optimization of the system.
Oshiro, T [UCLA, Los Angeles, CA (United States); Donaghy, M [California State University, Northridge, Northridge, CA (United States); Slechta, A [California State University, Northridge, Northridge, CA (United States)
Purpose: To determine if the flipped class format has an effect on examination results for a radiologic technologist (RT) program and discuss benefits from creating video resources. Methods: From 2001–2015, students had taken both a radiological physics and quality control (QC) class as a part of their didactic training. In 2005/2006, the creation of videos of didactic lectures and QC test demonstrations allowed for a flip where content was studied at home while exercises and reviews were done in-class. Final examinations were retrospectively reviewed from this timeframe. 12 multiple choice physics questions (MCP) and 5 short answer QC questions (SAQC) were common to pre and post flip exams. The RT program’s ARRT exam scores were also obtained and compared to national averages. Results: In total, 36 lecture videos and 65 quality control videos were created for the flipped content. Data was ∼2.4GB and distributed to students via USB or CD media. For MCP questions, scores improved by 7.9% with the flipped format and significance (Student’s t-test, p<0.05) was found for 3 of the 12 questions. SAQC questions showed improvement by 14.6% and significance was found for 2 of the 5 questions. Student enrollment increased from ∼14 (2001–2004) to ∼23 students (2005–15). Content was continuously added post-flip due to the efficiency of delivery. The QC class in 2003 covered 45 test setups in-class while 65 were covered with video segments in 2014. Flipped materials are currently being repurposed. In 2015, this video content was restructured into an ARRT exam review guide and in 2016, the content was reorganized for fluoroscopy training for physicians. Conclusion: We believe that flipped classes can improve efficiency of content delivery and improve student performance even with an increase in class size. This format allows for flexibility in learning as well as re-use in multiple applications.
Bellamy, Angelina Sanderson
Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension...
Full Text Available Production systems suffer frequent changes due to the growing demand and need for providing market competitiveness. Therefore, the application of intelligent systems can greatly increase the level of flexibility and efficiency, but also reduce the overall costs. On example of system for the production of irregular and variable shaped parts by cutting the wooden flat surfaces, it is discussed the possibility of applying intelligent agent-based system. In order to implement it in the production process, it was necessary to firstly performed an analysis and assessment of the initial situation. Then, we spotted a weak points and gave some suggestions to improve process by application of agents. The obtained solution has reduced the number of engaged workers, reduced the scope of their duties, made faster flow of materials, improved its utilization and we finally introduced the scheme of the new agent-based manufacturing process that achieves the foregoing benefits.
Bellamy, Angelina Sanderson
Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.
Igor L. Kovalenko; Vitaliy P. Kuprin; Dmytro V. Kiyaschenko
In this paper it is presented the substantiation of choice of fuel phase composition and optimal technology of emulsion production on the basis of binary solution of ammonium and calcium nitrates, which provide the obtaining of energy condensed packaged systems with specified properties. The thermal decomposition of energy condensed systems on the basis of ammonium nitrate is investigated. It is shown that the fuel phase of emulsion systems should be based on esters of polyunsaturated acids o...
Hansen, Anne Sofie Lærke; Lennen, Rebecca M; Sonnenschein, Nikolaus
compared to basic science research requires pushing systems biology strategies to their limits and often spurs innovative developments that benefit fields outside metabolic engineering. Here we survey recent advanced applications of systems biology methods in engineering microbial production strains......There is an urgent need to significantly accelerate the development of microbial cell factories to produce fuels and chemicals from renewable feedstocks in order to facilitate the transition to a biobased society. Methods commonly used within the field of systems biology including omics...
Dale, Crystal Buchanan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Klein, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
This document describes the reliability, maintainability, and availability (RMA) modeling of the Los Alamos National Laboratory (LANL) design for the Closed Loop Helium Cooling System (CLHCS) planned for the NorthStar accelerator-based 99Mo production facility. The current analysis incorporates a conceptual helium recovery system, beam diagnostics, and prototype control system into the reliability analysis. The results from the 1000 hr blower test are addressed.
Igor L. Kovalenko
Full Text Available In this paper it is presented the substantiation of choice of fuel phase composition and optimal technology of emulsion production on the basis of binary solution of ammonium and calcium nitrates, which provide the obtaining of energy condensed packaged systems with specified properties. The thermal decomposition of energy condensed systems on the basis of ammonium nitrate is investigated. It is shown that the fuel phase of emulsion systems should be based on esters of polyunsaturated acids or on combinations thereof with petroleum products. And ceresin or petroleum wax can be used as the structuring additive. The influence of the technology of energy condensed systems production on the physicochemical and detonation parameters of emulsion explosives is considered. It is shown the possibility of obtaining of emulsion systems with dispersion of 1.3...1.8 microns and viscosity higher than 103 Pa∙s in the apparatus of original design. The sensitizing effect of chlorinated paraffin CP-470 on the thermolysis of energy condensed emulsion system is shown. The composition and production technology of energy condensed packaged emulsion systems of mark Ukrainit-P for underground mining in mines not dangerous on gas and dust are developed.
In-Situ Resource Utilization (ISRU) seeks to make human space exploration feasible; by using available resources from a planet or the moon to produce consumables, parts, and structures that otherwise would be brought from Earth. Producing these in situ reduces the mass of such that must be launched and doing so allows more payload mass' for each mission. The production of oxygen from lunar regolith, for life support and propellant, is one of the tasks being studied under ISRU. NASA is currently funding three processes that have shown technical merit for the production of oxygen from regolith: Molten Salt Electrolysis, Hydrogen Reduction of Ilmenite, and Carbothermal Reduction. The ISRU program is currently developing system models of, the , abovementioned processes to: (1) help NASA in the evaluation process to select the most cost-effective and efficient process for further prototype development, (2) identify key parameters, (3) optimize the oxygen production process, (4) provide estimates on energy and power requirements, mass and volume.of the system, oxygen production rate, mass of regolith required, mass of consumables, and other important parameters, and (5) integrate into the overall end-to-end ISRU system model, which could be integrated with mission architecture models. The oxygen production system model is divided into modules that represent unit operations (e.g., reactor, water electrolyzer, heat exchanger). Each module is modeled theoretically using Excel and Visual Basic for Applications (VBA), and will be validated using experimental data from on-going laboratory work. This modularity (plug-n-play) feature of each unit operation allows the use of the same model on different oxygen production systems simulations resulting in comparable results. In this presentation, preliminary results for mass, power, volume will be presented along with brief description of the oxygen production system model.
Lee, Hyun Jeong; Oh, Se An
Respiratory-gated radiation therapy (RGRT) has been used to minimize the dose to normal tissue in lung-cancer radiotherapy. The present research aims to improve the regularity of respiration in RGRT using a video coached respiration guiding system. In the study, 16 patients with lung cancer were evaluated. The respiration signals of the patients were measured by a real-time position management (RPM) Respiratory Gating System (Varian, USA) and the patients were trained using the video coached respiration guiding system. The patients performed free breathing and guided breathing, and the respiratory cycles were acquired for ~5 min. Then, Microsoft Excel 2010 software was used to calculate the mean and standard deviation for each phase. The standard deviation was computed in order to analyze the improvement in the respiratory regularity with respect to the period and displacement. The standard deviation of the guided breathing decreased to 65.14% in the inhale peak and 71.04% in the exhale peak compared with the...
Chen, Ming; He, Jing; Deng, Rui; Chen, Qinghui; Zhang, Jinlong; Chen, Lin
To further investigate the feasibility of the digital signal processing (DSP) algorithms (e.g., symbol timing synchronization, channel estimation and equalization, and sampling clock frequency offset (SCFO) estimation and compensation) for real-time optical orthogonal frequency-division multiplexing (OFDM) system, 2.97-Gb/s real-time high-definition video signal parallel transmission is experimentally demonstrated in OFDM-based short-reach intensity-modulated direct-detection (IM-DD) systems. The experimental results show that, in the presence of ∼12 ppm SCFO between transmitter and receiver, the adaptively modulated OFDM signal transmission over 20 km standard single-mode fiber with an error bit rate less than 1 × 10-9 can be achieved by using only DSP-based small SCFO estimation and compensation method without utilizing forward error correction technique. To the best of our knowledge, for the first time, we successfully demonstrate that the video signal at a bit rate in excess of 1-Gb/s transmission in a simple real-valued inverse fast Fourier transform and fast Fourier transform based IM-DD optical OFDM system employing a directly modulated laser.
Corporate television suffers from at least two "identity crises": departmental isolation, and the lack of a legitimate identity for the corporate video product itself. Video departments are not usually viewed and accepted by the organizational whole as natural evolutions of a historically defined and behaviorally integrated system. The…
Agnisarman, Sruthy; Narasimha, Shraddhaa; Chalil Madathil, Kapil; Welch, Brandon; Brinda, Fnu; Ashok, Aparna; McElligott, James
Telemedicine is the use of technology to provide and support health care when distance separates the clinical service and the patient. Home-based telemedicine systems involve the use of such technology for medical support and care connecting the patient from the comfort of their homes with the clinician. In order for such a system to be used extensively, it is necessary to understand not only the issues faced by the patients in using them but also the clinician. The aim of this study was to conduct a heuristic evaluation of 4 telemedicine software platforms-Doxy.me, Polycom, Vidyo, and VSee-to assess possible problems and limitations that could affect the usability of the system from the clinician's perspective. It was found that 5 experts individually evaluated all four systems using Nielsen's list of heuristics, classifying the issues based on a severity rating scale. A total of 46 unique problems were identified by the experts. The heuristics most frequently violated were visibility of system status and Error prevention amounting to 24% (11/46 issues) each. Esthetic and minimalist design was second contributing to 13% (6/46 issues) of the total errors. Heuristic evaluation coupled with a severity rating scale was found to be an effective method for identifying problems with the systems. Prioritization of these problems based on the rating provides a good starting point for resolving the issues affecting these platforms. There is a need for better transparency and a more streamlined approach for how physicians use telemedicine systems. Visibility of the system status and speaking the users' language are keys for achieving this.
Davidson, Christina; Given, Lisa M.; Danby, Susan; Thorpe, Karen
Much of what is written about digital technologies in preschool contexts focuses on young children's acquisition of skills rather than their meaning-making during use of technologies. In this paper, we consider how the viewing of a YouTube video was used by a teacher and children to produce shared understandings about it. Conversation analysis of…
This book explores the power of using media education to help urban teenagers develop their critical thinking and literacy skills. Drawing on 20 years of experience working with inner-city youth at the Educational Video Center (EVC) in New York City, the author looks at both the problems and possibilities of this model of media education.…
Lee, Sung-Ho; Jang, Bumjoon; Kim, Dong Hee; Park, Chang Hyun; Bae, Gyuri; Park, Seung Woo; Park, Seung-Han
Unlike those of other ordinary laser scanning microscopies in the past, nonlinear optical laser scanning microscopy (SHG, THG microscopy) applied ultrafast laser technology which has high peak powers with relatively inexpensive, low-average-power. It short pulse nature reduces the ionization damage in organic molecules. And it enables us to take bright label-free images. In this study, we measured cell division of zebrafish egg with ultrafast video images using multimodal nonlinear optical microscope. The result shows in-vivo cell division label-free imaging with sub-cellular resolution.
Catron, Louis E.
Lists nine practical applications of camcorders to theater companies and programs. Discusses the purchase of video gear, camcorder features, accessories, the use of the camcorder in the classroom, theater management, student uses, and video production. (PRA)
Discusses the use of on-demand streaming video in school libraries. Explains how streaming works, considers advantages and technical issues, and describes products from three companies that are pioneering streaming in the educational video market. (LRW)
Full Text Available ... Program Growth and Nutrition Program Celiac Disease Program | Videos Contact the Celiac Disease Program 1-617-355- ... live happy and productive lives. Each of our video segments provides practical information about celiac disease from ...
Myrodia, Anna; Bonev, Martin; Hvam, Lars
In designing configure-to-order production systems for a growing product variety, companies are challenged with an increased complexity for obtaining high productivity levels and cost-effectiveness. In academia several optimization methods and conceptual frameworks for substituting components......, or increasing lot sizes and storage capacity have been proposed. Our study presents a practical framework for quantifying the impact of a two-way substitution at different production stages and its impact on storage and machinery utilization. In a case study we quantify the relation between substitution, lot...... sizing and capacity utilization, while maintaining the production capacity as well as the external product variety....
Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars
to be made in order to secure the success and delivery of the project as it will increase the commitment from the business side. This paper presents a framework for supporting the development of business cases for PCSs and discusses the experiences from multiple case studies benefiting from the suggested......In the recent years, product configuration systems (PCSs) have received greater attention from industries providing customized products as a response to increased demand to fulfil diverse customers’ needs for customized products. Before developing a PCS, a well-established business case has...
Full Text Available The main objective of this paper is to identify and understand the relationship dynamics among the quality enabled factors affecting the scheduling stage of production system life cycle. For this purpose, Interpretative structural modelling (ISM approach has been utilized for developing the relationships among the various factors of the scheduling system stage. Afterwards, MICMAC (Matriced Impacts Croises Multiplication Appliqueeaun Classement analysis has been carried out in order to classify the factors into different categories and to disclose the direct and indirect effects of each factor on the scheduling system. It is an approach for refining the decision making in the scheduling stage of production system life cycle.
Lee, A R; Yang, S; Shin, Y H; Kim, J A; Chung, I S; Cho, H S; Lee, J J
We evaluated the effects of three airway manipulation manoeuvres: (a) conventional (single-handed chin lift); (b) backward, upward and right-sided pressure (BURP) manoeuvre; and (c) modified jaw thrust manoeuvre (two-handed aided by an assistant) on laryngeal view and intubation time using the Clarus Video System in 215 patients undergoing general anaesthesia with orotracheal intubation. In the first part of this study, the laryngeal view was recorded as a modified Cormack-Lehane grade with each manoeuvre. In the second part, intubation was performed using the assigned airway manipulation. The primary outcome was the time to intubation, and the secondary outcomes were the modified Cormack-Lehane grade, the number of attempts and the overall success rate. There were significant differences in modified Cormack-Lehane grade between the three airway manipulations (p < 0.0001). Post-hoc analysis indicated that the modified jaw thrust improved the laryngeal view compared with the conventional (p < 0.0001) and the BURP manoeuvres (p < 0.0001). The BURP worsened the laryngeal view compared with the conventional manoeuvre (p = 0.0132). The time to intubation in the modified jaw thrust group was shorter than with the conventional manoeuvre (p = 0.0004) and the BURP group (p < 0.0001). We conclude that the modified jaw thrust is the most effective manoeuvre at improving the laryngeal view and shortening intubation time with the Clarus Video System. © 2013 The Association of Anaesthetists of Great Britain and Ireland.
Mol, J.J.D.; Pouwelse, J.A.; Meulpolder, M.; Epema, D.H.J.; Sips, H.J.
Centralised solutions for Video-on-Demand (VoD) services, which stream pre-recorded video content to multiple clients who start watching at the moments of their own choosing, are not scalable because of the high bandwidth requirements of the central video servers. Peer-to-peer (P2P) techniques which
Glukhov, V. I.; Ivleva, I. A.; Zlatkina, O. Y.
The work is devoted to the relevant topic such as the technical products quality improvement due to the geometrical specifications accuracy. The research purpose is to ensure the quality indicators on the basis of the systematic approach to the values normalization and geometrical specifications accuracy in the workpiece coordinate systems in the process of design. To achieve the goal two tasks are completed such as the datum features classification according to the number of linear and angular freedom degrees constraints, called the datums informativeness, and the rectangular coordinate systems identification, materialized by workpiece datums sets. The datum features informativeness characterizes the datums functional purpose to limit product workpiece linear and angular degrees of freedom. The datum features informativeness numerically coincides with the kinematic pairs classes and couplings in mechanics. The datum features informativeness identifies the coordinate system without the location redundancy. Each coordinate plane of a rectangular coordinate system has different informativeness 3 + 2 + 1. Each coordinate axis also has different informativeness 4+2+Θ (zero). It is possible to establish the associated workpiece position with three linear and three angular coordinates relative to two axes with the informativeness 4 and 2. is higher, the more informativeness of the coordinate axis or a coordinate plane is, the higher is the linear and angular coordinates accuracy, the coordinate being plotted along the coordinate axis or plane. The systematic approach to the geometrical products specifications positioning in coordinate systems is the scientific basis for a natural transition to the functional dimensions of features position - coordinating dimensions and the size of the features form - feature dimensions of two measures: linear and angular ones. The products technical quality improving is possible due to the coordinate systems introduction materialized by
Renato Bobsin Machado
Full Text Available OBJECTIVE: Develop a prototype using computer resources to optimize the management process of clinical information and video colonoscopy exams. MATERIALS AND METHODS: Through meetings with medical and computer experts, the following requirements were defined: management of information about medical professionals, patients and exams; video and image captured by video colonoscopes during the exam, and the availability of these videos and images on the Web for further analysis. The technologies used were Java, Flex, JBoss, Red5, JBoss SEAM, MySQL and Flamingo. RESULTS AND DISCUSSION: The prototype contributed to the area of colonocospy by providing resources to maintain the patients' history, tests and images from video colonoscopies. The web-based application allows greater flexibility to physicians and specialists. The resources for remote analysis of data and tests can help doctors and patients in the examination and diagnosis. CONCLUSION: The implemented prototype has contributed to improve colonoscopy-related processes. Future activities include the prototype deployment in the Service of Coloproctology and the utilization of this model to allow real-time monitoring of these exams and knowledge extraction from such structured database using artificial intelligence.OBJETIVO: Desenvolver um protótipo por meio de recursos computacionais para a otimização de processos de gerenciamento de informações clínicas e de exames de videocolonoscopia. MATERIAIS E MÉTODOS: Por meio de reuniões com especialistas médicos e computacionais, definiram-se os seguintes requisitos: gestão de informações sobre profissionais médicos, pacientes e exames complementares; aquisição dos vídeos e captura de imagens a partir do videocolonoscópio durante a realização desse exame, e a disponibilidade por meio da Web para análise posterior dessas imagens. As tecnologias aplicadas foram: Java, Flex, JBOSS, Red5, JBOSS SEAM, MySQL e Flamingo. RESULTADOS E
Nortvig, Anne Mette; Sørensen, Birgitte Holm
This project’s aim was to support and facilitate master’s students’ preparation and collaboration by making video podcasts of short lectures available on YouTube prior to students’ first face-to-face seminar. The empirical material stems from group interviews, from statistical data created through...... YouTube analytics and from surveys answered by students after the seminar. The project sought to explore how video podcasts support learning and reflection online and how students use and reflect on the integration of online activities in the videos. Findings showed that students engaged actively...
Zhongqi Sheng; Tao Xu; Junyou Song
Product service system is a combination of product and services to meet the customer requirements. Configuration design is the key process of product service system development. This paper studies the configuration design of product service system for CNC machine tools. The research explores the configuration design process of product service system development, analyzes the retrieval method of product service system schemes, determines the configuration sequence of product modules and servic...
Borodin, Mikhail; The ATLAS collaboration; Golubkov, Dmitry; Klimentov, Alexei; Maeno, Tadashi; Mashinistov, Ruslan; Vaniachine, Alexandre
The ATLAS experiment at LHC data processing and simulation grows continuously, as more data and more use cases emerge. For data processing the ATLAS experiment adopted the data transformation approach, where software applications transform the input data into outputs. In the ATLAS production system, each data transformation is represented by a task, a collection of many jobs, dynamically submitted by the ATLAS workload management system (PanDA/JEDI) and executed on the Grid, clouds and supercomputers. Patterns in ATLAS data transformation workflows composed of many tasks provided a scalable production system framework for template definitions of the many-tasks workflows. User interface and system logic of these workflows are being implemented in the Database Engine for Tasks (DEFT). Such development required using modern computing technologies and approaches. We report technical details of this development: database implementation, server logic and Web user interface technologies.
Grossman, R. L.; Larson, R. G.
The purpose of this note is to show how hybrid systems may be modeled as products of nonlinear control systems and finite state automata. By a hybrid system, we mean a network of consisting of continuous, nonlinear control system connected to discrete, finite state automata. Our point of view is that the automata switches between the control systems, and that this switching is a function of the discrete input symbols or letters that it receives. We show how a nonlinear control system may be viewed as a pair consisting of a bialgebra of operators coding the dynamics, and an algebra of observations coding the state space. We also show that a finite automata has a similar representation. A hybrid system is then modeled by taking suitable products of the bialgebras coding the dynamics and the observation algebras coding the state spaces.
Full Text Available An argument is presented for the unification of descriptions of product systems and enterprise systems. Product systems are developed and produced by enterprises, thus forming an integral part of the enterprise's architecture. However, many products...
J.L.G. Binken (Jeroen); S. Stremersch (Stefan)
textabstractSystems are composed of complementary products (e.g., video game systems are composed of the video game console and video games). Prior literature on indirect network effects argues that, in system markets, sales of the primary product (often referred to as "hardware") largely depend on
Full Text Available In the past few years there has been an explosion in the use of digital video data. Many people have personal computers at home, and with the help of the Internet users can easily share video files on their computer. This makes possible the unauthorized use of digital media, and without adequate protection systems the authors and distributors have no means to prevent it.Digital watermarking techniques can help these systems to be more effective by embedding secret data right into the video stream. This makes minor changes in the frames of the video, but these changes are almost imperceptible to the human visual system. The embedded information can involve copyright data, access control etc. A robust watermark is resistant to various distortions of the video, so it cannot be removed without affecting the quality of the host medium. In this paper I propose a video watermarking scheme that fulfills the requirements of a robust watermark.
L. I. Podderegina
Full Text Available The paper presents results of the analysis concerning taxation in the country at the level of an enteфrise and its structural sub-divisions in the period of transforming economy.Recommendations are given on the following aspects: modernization of income taxation system for natural persons; tax payment in case of wage computation; exclusion of tax payments and assignments fi-om production cost value which are not connected with the production process; tax computation for real property; evaluation of enterprise taxation level.The paper shows the possible cases concerning formation of tax payments and assignments of an enterprise and its structural sub-divisions.Taxation system is shown at the level of enterprise structural sub-divisions (shop, department, at the level of shop structural sub-divisions (section, team, for works to be executed by an individual person of the production process (operation, product, works, services. This system promotes to efficient functioning of intra-production economical relations.The paper provides possible variants of formation of taxation payments and assignments for an enterprise and its structural sub-divisions.
Petre Vlah-Horea BOŢIANU
Full Text Available During the last years, video files showing different surgical procedures have become extremely available and popular on the internet. They are available on both free and unrestricted sites, as well as on dedicated sites which control the medical quality of the information. Honest presentation and a minimal video-editing to include information about the procedure are mandatory to achieve a product with a true educational value. The integration of the web-based video educational resources in the continuing medical information system seems to be limited and the true educational impact very difficult to assess. A review of the available literature dedicated on this subject shows that the main challenge is related to the human factor and not to the available technology.
Addressing the challenge of improving battery quality while reducing high costs and environmental impacts of the production, this book presents a multiscale simulation approach for battery production systems along with a software environment and an application procedure. Battery systems are among the most important technologies of the 21st century since they are enablers for the market success of electric vehicles and stationary energy storage solutions. However, the performance of batteries so far has limited possible applications. Addressing this challenge requires an interdisciplinary understanding of dynamic cause-effect relationships between processes, equipment, materials, and environmental conditions. The approach in this book supports the integrated evaluation of improvement measures and is usable for different planning horizons. It is applied to an exemplary battery cell production and module assembly in order to demonstrate the effectiveness and potential benefits of the simulation.
The rapid consumption of fossil fuels has caused unacceptable environmental problems such as the greenhouse effect, which may lead to disastrous climatic consequences. Because fossil fuels are the products of long-term photosynthesis, it is highly desirable to develop artificial photosynthetic systems for the production of renewable and clean energy such as hydrogen. This article summarizes recent advances on studies of artificial photosynthetic systems for photocatalytic production of hydrogen with hydrogenases and their functional mimics including hybrids of natural and artificial components. Because it is highly desired to convert gaseous H2 to an easily storable form, recent progress on storage of hydrogen as liquid or solid form has also been described in this article. Copyright © 2014 Elsevier Ltd. All rights reserved.
This management is synonymous with water management since water of suitable quality and quantity is a pre-requisite for any successful aquacultural production. ... Farm Aquaculture Resource Management (FARM), Pond-Water Availability Period (PWAP) model, AquaFarm and Raceway design and simulation system ...
Greenhouse gas (GHG) emissions and their potential impact on global warming has become an important national and international concern. Dairy production systems along with all other types of animal agriculture are recognized as a source of GHG. Although little information exists on the net GHG emiss...
The farm-gate carbon footprint of milk quantifies the net greenhouse gas emissions of a dairy production system. Published values vary widely depending upon farm management practices and the calculation method used. Standard procedures for calculating the carbon footprint of milk are now established...
A common belief among consumers is the superior quality of organically grown tomato fruits over their conventionally grown counterparts. The present study was performed to evaluate the quality characteristics of tomatoes grown using organic and conventional production systems and to determine the effects of microbial ...
Quantum chaos is a subject whose major goal is to identify and to investigate different quantum signatures of classical chaos. Here we study entanglement production in coupled chaotic systems as a possible quantum indicator of classical chaos. We use coupled kicked tops as a model for our extensive numerical studies.
the most efficient algorithms for Smuat cli ,et d(ev,, lopd . 1,, ,achieve this efficiency, Rete exploits two features common to most production vs ent... risk . heavily defended targets. A contract wa awarded to Texas Instruments Iicor- porated (TI) in September 19S.5 to develop a system architecture ard
Gojkov, Grozdanka; Rajovic, Ranko; Stojanovic, Aleksandar
A short presentation of the basic findings of an explorative research, in which the possibility of encouraging the development of critical thinking with the NTC learning system was explored, i.e. only the results of its influence on the development of one aspect--divergent production are presented. This paper is a modest addition to the research…
Gemser, G.; Kuijken, B.; Wijnberg, N.M.; Van Erp, J.
In this paper, we focus on how to design product service systems (PSS) that provide for coherent user experiences. Our research is part of a large Dutch research program (CRISP, www.crispplatform.nl) on PSS. We propose a framework for identifying real PSS by integrating perspectives from economics
Boersing, Nele; Wellmann, Florian; Niederau, Jan
Exploring hydrothermal reservoirs requires reliable estimates of subsurface temperatures to delineate favorable locations of boreholes. It is therefore of fundamental and practical importance to understand the thermodynamic behavior of the system in order to predict its performance with numerical studies. To this end, the thermodynamic measure of entropy production is considered as a useful abstraction tool to characterize the convective state of a system since it accounts for dissipative heat processes and gives insight into the system's average behavior in a statistical sense. Solving the underlying conservation principles of a convective hydrothermal system is sensitive to initial conditions and boundary conditions which in turn are prone to uncertain knowledge in subsurface parameters. There exist multiple numerical solutions to the mathematical description of a convective system and the prediction becomes even more challenging as the vigor of convection increases. Thus, the variety of possible modes contained in such highly non-linear problems needs to be quantified. A synthetic study is carried out to simulate fluid flow and heat transfer in a finite porous layer heated from below. Various two-dimensional models are created such that their corresponding Rayleigh numbers lie in a range from the sub-critical linear to the supercritical non-linear regime, that is purely conductive to convection-dominated systems. Entropy production is found to describe the transient evolution of convective processes fairly well and can be used to identify thermodynamic equilibrium. Additionally, varying the aspect ratio for each Rayleigh number shows that the variety of realized convection modes increases with both larger aspect ratio and higher Rayleigh number. This phenomenon is also reflected by an enlarged spread of entropy production for the realized modes. Consequently, the Rayleigh number can be correlated to the magnitude of entropy production. In cases of moderate
Xin, H; Gates, R. S; Green, A. R; Mitloehner, F. M; Moore, P. A; Wathes, C. M
ABSTRACT As part of a systemic assessment toward social sustainability of egg production, we have reviewed current knowledge about the environmental impacts of egg production systems and identified...
Wetzel, C. Douglas; And Others
This volume is a blend of media research, cognitive science research, and tradecraft knowledge regarding video production techniques. The research covers: visual learning; verbal-auditory information; news broadcasts; the value of motion and animation in film and video; simulation (including realism and fidelity); the relationship of text and…
Bouma, Henri; van der Mark, Wannes; Eendebak, Pieter T.; Landsmeer, Sander H.; van Eekeren, Adam W. M.; ter Haar, Frank B.; Wieringa, F. Pieter; van Basten, Jean-Paul
Compared to open surgery, minimal invasive surgery offers reduced trauma and faster recovery. However, lack of direct view limits space perception. Stereo-endoscopy improves depth perception, but is still restricted to the direct endoscopic field-of-view. We describe a novel technology that reconstructs 3D-panoramas from endoscopic video streams providing a much wider cumulative overview. The method is compatible with any endoscope. We demonstrate that it is possible to generate photorealistic 3D-environments from mono- and stereoscopic endoscopy. The resulting 3D-reconstructions can be directly applied in simulators and e-learning. Extended to real-time processing, the method looks promising for telesurgery or other remote vision-guided tasks.