WorldWideScience

Sample records for video equipment manufacturing

  1. Equipment Manufacturers, Importers, and Exporters: Frequent Questions

    Science.gov (United States)

    As the US continues to phase out HCFCs, equipment manufacturers, importers, and exporters will need to adapt to the changing market demand for equipment. This page provides these groups with information on their responsibilities under the regulations.

  2. Manufacture and maintenance of laboratory equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. K.; Whang, C. K.; Lee, J. H.; Youm, K. Y.; Hong, S. H.; Choi, H. Y.; An, C.; Park, I. W.; Kim, K. S.; Lee, W. J.; Yoon, K. B.; Kim, H. W.; Lee, I. B.; Lee, C. K.; Youm, J. H.; Oho, W. H.; Choi, B. K.; Jang, K. D.

    1996-12-01

    This report on the manufacture and maintenance of laboratory equipment contains working contents, scope and contents of a request working to the Machine Shop, also records the principal production design, manufacture contents and a relevant working drawing. The working content and scope of the Machine Shop is to support the successful and convenient performance of the R and D by manufacture and maintenance of all sorts of laboratory equipment. (author). 9 tabs., 12 figs.

  3. Manufacture and maintenance of laboratory equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Kyun; Hwang, Chang Kyu; Hwang, Bong Ha; Lee, Jong Wha; Yeom, Ki Eon; Park, Myung Ku; Hong, Soon Hyeon; Choi, Ho Young; An, Dae Kyu; An, Choon; Park, In Won; Kim, Kyeong Sik; Lee, In Bae; Yeom, Jeong Heon; Lee, Chul Ku; Sin, Keon Ju; Oh, Wan Ho; Choi, Byung Kwon; Chang, Kyeong Duk; Lee, Young Soon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-12-01

    This report on the manufacture and maintenance of laboratory equipment contains working contents, scope and contents of a request working to the Machine Shop, also records the principal production design, manufacture contents and a relevant working drawing. The working content and scope of the Machine Shop is to support the successful and convenient performance of the Research and development by manufacture and maintenance of all sorts of laboratory equipment. 12 tabs., 5 figs. (Author) .new.

  4. Video Games as Equipment for Living

    OpenAIRE

    Soetaert, Ronald; Bourgonjon, Jeroen; Rutten, Kris

    2011-01-01

    In their article "Video Games as Equipment for Living" Ronald Soetaert, Jeroen Bourgonjon, and Kris Rutten postulate that with the emergence of new media there is need of a re-evaluation of all modes of communication and the ways in which literacy is conceptualized. Drawing on the concept of multi-literacy they suggest a rhetorical/ anthropological meta-perspective to describe human beings as symbol using animals and focus on particular symbol systems: narrative, drama, and video games. Speci...

  5. Selection of Additive Manufacturing (AM) Equipment

    Science.gov (United States)

    2017-04-01

    and small Stereo Lithography (SLA) systems, as shown in Figure 1. Most systems are desktop and hobby-level equipment that are being used as powerful...accuracy deposition heads, and high-resolution vision devices to fabricate high-quality, novel items that previously were impossible to manufacture...Science and Technology SLA Stereo Lithography SME Subject Matter Expert TARDEC Tank Automotive Research, Development, and Engineering Center U.S. United States

  6. Service Offering at Electrical Equipment Manufacturers

    Directory of Open Access Journals (Sweden)

    Lucie Kaňovská

    2015-09-01

    Full Text Available Purpose of the article: The aim of the paper is to uncover ways of managing service offering provided by electrical equipment manufactures in the Czech Republic. The segment is extremely important for Czech industry nowadays, especially because of many companies being subcontractors for the car industry and mechanical engineering. The producers of electric equipment comply with the Czech industry classification CZ-NACE 27. Methodology/methods: The questionnaire in the form of the Likert scale was prepared to gather information about customer services. The respondents were usually directors or managers, e.g. employees with high competencies of knowing customer services in this particular market. The total of 22 companies were included in the survey. Research was focused on the following industries classifications belonging to CZ-NACE 27: CZ-NACE 27, CZ-NACE 271 and CZ-NACE 273. According to Czech Statistical Office the total number of companies belonging to these 3 segments is 136. It means 16,2% companies belonging to CZ-NACE 27 participated in our research. Basic statistical methods were used to analyse the complete database. Scientific aim: The paper deals with the problem of service offering provided by today’s manufacturers. Global understanding of services that manufacturers really develop, sell, deliver and manage is still limited. Findings: Managing service offering provided by today‘s manufacturers shows that 1 Manufacturers not offer only tangible products, but also wide range of services and even information and support. 2 New products are not designed only according to company technicians, but also according to their customers. Their products and services are developed, tested and improved according to their needs. 3 Services provide complex customer care from time product selection to its end. Conclusions: Manufacturers of tangible products need to enlarge their product offering to be able to satisfy customers. Therefore

  7. Innovative Video Diagnostic Equipment for Material Science

    Science.gov (United States)

    Capuano, G.; Titomanlio, D.; Soellner, W.; Seidel, A.

    2012-01-01

    Materials science experiments under microgravity increasingly rely on advanced optical systems to determine the physical properties of the samples under investigation. This includes video systems with high spatial and temporal resolution. The acquisition, handling, storage and transmission to ground of the resulting video data are very challenging. Since the available downlink data rate is limited, the capability to compress the video data significantly without compromising the data quality is essential. We report on the development of a Digital Video System (DVS) for EML (Electro Magnetic Levitator) which provides real-time video acquisition, high compression using advanced Wavelet algorithms, storage and transmission of a continuous flow of video with different characteristics in terms of image dimensions and frame rates. The DVS is able to operate with the latest generation of high-performance cameras acquiring high resolution video images up to 4Mpixels@60 fps or high frame rate video images up to about 1000 fps@512x512pixels.

  8. UOE Pipe Manufacturing Process Simulation: Equipment Designing and Construction

    Science.gov (United States)

    Delistoian, Dmitri; Chirchor, Mihael

    2017-12-01

    UOE pipe manufacturing process influence directly on pipeline resilience and operation capacity. At present most spreaded pipe manufacturing method is UOE. This method is based on cold forming. After each technological step appears a certain stress and strain level. For pipe stress strain study is designed and constructed special equipment that simulate entire technological process.UOE pipe equipment is dedicated for manufacturing of longitudinally submerged arc welded DN 400 (16 inch) steel pipe.

  9. The design and manufacture of the catalyst test equipment

    Energy Technology Data Exchange (ETDEWEB)

    Cho, J. H.; Song, I. T. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-02-01

    The object of this report is to design and manufacture of the catalyst test equipment for removing tritium(H3) included in heavy water for the heavy water reactor. The design conditions of the reactor with the test equipment are summarized as follows 1) Flow rate : 336 l/min. 2) Pressure : 1.15kg/cm{sup 2}. 3) Maximum Temperature : 80 deg C. The test equipment is composed of the water jacket reactor, water equilibrator, heaters, condensers, tanks and pumps. As well as, it is composed of the water, hydrogen, helium, vacuum, emergency operation and control systems. This report will be used important data for the design and manufacture of the equipment for removing tritium. 30 tabs. (Author)

  10. Value-leverage by Aerospace Original Equipment Manufacturers

    NARCIS (Netherlands)

    Beelaerts van Blokland, W.W.A.

    2010-01-01

    With the creation of new aircraft products; Embraer E-170/190, Dassault 7X, Airbus A380 and Boeing B787, aerospace original equipment manufacturers (OEMs) involve suppliers not only with the co-production of aircraft sub systems, but also with the entire development of sub systems, like fuselage and

  11. Analog Video Authentication and Seal Verification Equipment Development

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Lancaster

    2012-09-01

    Under contract to the US Department of Energy in support of arms control treaty verification activities, the Savannah River National Laboratory in conjunction with the Pacific Northwest National Laboratory, the Idaho National Laboratory and Milagro Consulting, LLC developed equipment for use within a chain of custody regime. This paper discussed two specific devices, the Authentication Through the Lens (ATL) analog video authentication system and a photographic multi-seal reader. Both of these devices have been demonstrated in a field trial, and the experience gained throughout will also be discussed. Typically, cryptographic methods are used to prove the authenticity of digital images and video used in arms control chain of custody applications. However, in some applications analog cameras are used. Since cryptographic authentication methods will not work on analog video streams, a simple method of authenticating analog video was developed and tested. A photographic multi-seal reader was developed to image different types of visual unique identifiers for use in chain of custody and authentication activities. This seal reader is unique in its ability to image various types of seals including the Cobra Seal, Reflective Particle Tags, and adhesive seals. Flicker comparison is used to compare before and after images collected with the seal reader in order to detect tampering and verify the integrity of the seal.

  12. Efficiency improvement of technological preparation of power equipment manufacturing

    Science.gov (United States)

    Milukov, I. A.; Rogalev, A. N.; Sokolov, V. P.; Shevchenko, I. V.

    2017-11-01

    Competitiveness of power equipment primarily depends on speeding-up the development and mastering of new equipment samples and technologies, enhancement of organisation and management of design, manufacturing and operation. Actual political, technological and economic conditions cause the acute need in changing the strategy and tactics of process planning. At that the issues of maintenance of equipment with simultaneous improvement of its efficiency and compatibility to domestically produced components are considering. In order to solve these problems, using the systems of computer-aided process planning for process design at all stages of power equipment life cycle is economically viable. Computer-aided process planning is developed for the purpose of improvement of process planning by using mathematical methods and optimisation of design and management processes on the basis of CALS technologies, which allows for simultaneous process design, process planning organisation and management based on mathematical and physical modelling of interrelated design objects and production system. An integration of computer-aided systems providing the interaction of informative and material processes at all stages of product life cycle is proposed as effective solution to the challenges in new equipment design and process planning.

  13. Sustainable Product: Personal Protective Equipment Manufactured with Green Plastic

    Directory of Open Access Journals (Sweden)

    Hamilton Aparecido Boa Vista

    2015-04-01

    Full Text Available This study analyzed the case of manufacturing of Personal Protective Equipment (PPE using as raw material biopolymers produced from ethanol from sugar cane, known as green polypropylene, produced since 2008 by BRASKEM. This article studied the PPE for the employee’s head protection, named helmet by NR 6, which is used in situations of exposure to weather and work scenarios in places where there is risk of impact from falling or projecting objects, burns, electric shock, and solar radiation. The MSA, green helmet manufacturer, made an inventory of greenhouse gas emissions into the atmosphere by comparing the two manufacturing processes of the helmet shell, covering the January 1 to December 31, 2011 period. It concluded that the sustainable helmet (green polyethylene and pigments robs 231g of CO2 from the atmosphere per produced unit, while the helmet’s production with traditional raw materials (polyethylene and petrochemical pigments found that, for each unit produced, 1029g of CO2 are emitted into the atmosphere. The study showed that substitution of raw materials has led to reduction in the impact generated in the helmets’ production.

  14. Inventory Management Strategies For Productivity Improvement In Equipment Manufacturing Firms

    Directory of Open Access Journals (Sweden)

    T.T Amachree

    2017-08-01

    Full Text Available This study examined and developed Inventory Management Strategies IMS which could be creatively employed for Productivity Improvement in Equipment Firms PIEMF Equipment manufacturing projects suffer from declining productivity and inability to effectively satisfy customized order batch quantity within schedules budgeted cost and quality specifications due to lack of robust and well defined IMS as well as none code classification of vast number of inventory item. Survey and expost-facto research designs were adopted on the four identified IMS in three EMF. The method used for primary data collection and measurement on four IMS and inventory management parameters was questionnaire modelled into likert five point scale from the target respondents being experts in the subject matter. The secondary data was obtained from the computerised inventory status file of the three equipment manufacturing firms. The methods of primary data analysis and test of research used were Pearsons product moment correlation coefficient and oneway. Analysis of variance ANOVA computer software via Statistical Program for Social Science SPSS version 17 ABC analysis and classification of materials was used for code categorization of secondary data also with the aid of Microsoft excel. The results of the analyses highlighted and isolated A class of inventory items which are 137 out of 543 for Siemens Nig. Ltd 154 out of 551 for Dresser-Rand Nig. Ltd and 162 of 551 for Nigerian Engineering Works Ltd. The results of Pearson product moment correlation analysis and test of research hypotheses indicate that Materials Requirements Planning MRP followed by Supply Chain Management SCM are the most significant IMS as they correlate strongly with PIEMF. The study recommends IMS adoption by code classification of materials in which MRP or SCM could be deployed for management of A class of inventories while classical IMS could be used for management B and C classes of inventory items.

  15. 40 CFR 1039.626 - What special provisions apply to equipment imported under the equipment-manufacturer flexibility...

    Science.gov (United States)

    2010-07-01

    ... to us must be in the English language, or include a complete translation in English. (9) You must... § 1039.625 for equipment produced outside the United States. Note that § 1039.625 limits these provisions... and manufacturing equipment. Companies that import equipment into the United States without meeting...

  16. 75 FR 47344 - Notice to Manufacturers of Foreign Object Debris (FOD) Detection Equipment

    Science.gov (United States)

    2010-08-05

    ... Federal Aviation Administration Notice to Manufacturers of Foreign Object Debris (FOD) Detection Equipment AGENCY: Federal Aviation Administration (FAA), US DOT. ACTION: Notice to manufacturers of Foreign Object... requirements of FAA Advisory Circular 150/5220-24, Airport Foreign Object Debris (FOD) Detection Equipment...

  17. 40 CFR 1060.130 - What installation instructions must I give to equipment manufacturers?

    Science.gov (United States)

    2010-07-01

    ... instructions must I give to equipment manufacturers? (a) If you sell a certified fuel-system component for... EPA Low-Emission Fuel Lines, tell equipment manufacturers not to install the fuel lines with Large SI engines that operate on gasoline or another volatile liquid fuel. (4) Describe instructions for installing...

  18. Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

    Science.gov (United States)

    Nanzetta, Philip

    1992-01-01

    The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

  19. Non-invasive system for monitoring of the manufacturing equipment

    Science.gov (United States)

    Mazăre, A. G.; Belu, N.; Ionescu, L. M.; Rachieru, N.; Misztal, A.

    2017-08-01

    The automotive industry is one of the most important industries in the world that concerns the economy and the world culture. High demand has resulted in increasing of the pressure on the production lines. In conclusion, it is required more careful in monitoring of the production equipment not only for maintenance but also for staff safety and to increase the quality of production. In this paper, we propose a solution for non-invasive monitoring of the industrial equipment operation by measuring the current consumption on energy supply lines. Thus, it is determined the utilization schedule of the equipment and operation mode. Based on these measurements, it’s built an activity report for that equipment, available to the quality management and maintenance team. The solution consists of the current measuring equipment, with self-harvesting capabilities and radio transceiver, and an embedded system which run a server. The current measuring equipment will transmit data about consumption of each energy supply network line where is placed the industrial equipment. So, we have an internal measuring radio network. The embedded system will collect data for the equipment and put in a local data base and it will provide via an intranet application. The entire system not requires any supplementary energy supply and interventions in the factory infrastructure. It is experimented in a company from the automotive industries.

  20. Modern Manufacturing Equipment of the Ernst Heinkel Airplane Works

    Science.gov (United States)

    Thormann, A; Jockisch, H

    1938-01-01

    This report contains a description of new methods of fabrication, new equipment, and special tools, with a view to supplying data for design from economical points of view, as well as to stimulate the interest of other factories in improved shop methods.

  1. METHODS AND PRINCIPLES OF OPTIMIZATION SPECIFIC TO THE DOMAIN OF EQUIPMENT AND MANUFACTURING PROCESSES

    Directory of Open Access Journals (Sweden)

    Radu Virgil GRIGORIU

    2011-11-01

    Full Text Available The objectives of the industrial products manufacturers are generally oriented to manufacture high quality level products, in less time and with maximum economic efficiency. The achievement of these objectives can be realized, generally, by optimizing the processes and the technological manufacturing equipment parameters. In order to optimize these parameters it is necessary to apply series of optimization methods and principles that allow the identification and establishment of the best solution from a variety of alternatives.

  2. On the Enhancement of Audio and Video in Mobile Equipment

    OpenAIRE

    Rossholm, Andreas

    2006-01-01

    Use of mobile equipment has increased exponentially over the last decade. As use becomes more widespread so too does the demand for new functionalities. The limited memory and computational power of many mobile devices has proven to be a challenge resulting in many innovative solutions and a number of new standards. Despite this, there is often a requirement for additional enhancement to improve quality. The focus of this thesis work has been to perform enhancement within two different areas;...

  3. Special equipment in competitive activities of powerlifters and dynamics of its manufacture

    OpenAIRE

    Kotendzhy L. V.

    2012-01-01

    There was reviewed the problem of use of ergogenic facilities in powerlifting, which makes it possible to expand representation about patterns of this kind of sport development. There was given comparative characteristic of applying special equipment of alternative international powerlifting organizations. There was researched the influence of special equipment on the effectiveness of powerlifters. There was studied the chronology of manufacture dynamics of special powerlifting equipment in d...

  4. INNOVATION IN HEAVY CONSTRUCTION EQUIPMENT MANUFACTURING: AN EXPLORATORY STUDY

    OpenAIRE

    MURRAY R. MILLSON; DAVID WILEMON

    2006-01-01

    This research investigates three major hypotheses important to new product market success in the heavy construction equipment industry which are as follows: the greater the degree of organisational integration during the development of new products, the greater will be the market success of new products; the greater the degree of organisational integration during the development of new products, the greater will be the proficiency with which new product development activities are performed; a...

  5. Review: equipment for anionic surfactant manufacture from oil palm

    Directory of Open Access Journals (Sweden)

    Jesús Alfonso Torres Ortega

    2010-05-01

    Full Text Available In the present study is performed a review of the current processes of sulfonation of various raw materials for determine the process conditions in order to present the state of the art of sulfonation processes for the manufacture of anionic surfactants. There has been a scientific literature with emphasis on several aspects: Technology, sulfonation reactors and operating conditions in the process, analytical techniques for monitoring the reaction degree, the mathematical models proposed in the literature for the sulfonation/sulfation in tubular absorbers, patenting and specialized industry publications in this area.

  6. The role of original equipment manufacturers in software distribution

    Directory of Open Access Journals (Sweden)

    Herţanu, A.

    2012-01-01

    Full Text Available The software distribution channels are having a significant impact on the mix of marketing not only for big companies in this domain, but also for small companies that activate in this domain. The Original Equipment Manufacturer’s distribution channel it’s having a significant impact on the marketing strategy of different companies. If the traditional distribution channels are still used to, the OEM’s channels are used more and more to distribute the software products or services not only to the segment of consumers formed by companies, but also to the segment of costumers formed by individual users.

  7. Materials Selection And Fabrication Practices For Food Processing Equipment Manufacturers In Uganda

    Directory of Open Access Journals (Sweden)

    John Baptist Kirabira

    2017-08-01

    Full Text Available The food processing industry is one of the fast-growing sub-sectors in Uganda. The industry which is majorly composed of medium and small scale firms depends on the locally developed food processing equipment. Due to lack of effective materials selection practices employed by the equipment manufacturers the materials normally selected for most designs are not the most appropriate ones hence compromising the quality of the equipment produced. This has not only led to poor quality food products due to contamination but could also turn out health hazardous to the consumers of the food products. This study involved the assessment of the current materials selection and fabrication procedures used by the food processing equipment manufacturers with a view of devising best practices that can be used to improve the quality of the food products processed by the locally fabricated equipment. Results of the study show that designers experience biasness and desire to minimize cost compromise the materials selection procedure. In addition to failing to choose the best material for a given application most equipment manufacturers are commonly fabricating equipment with inadequate surface finish and improper weldments. This hinders the equipments ability to meet food hygiene standards.

  8. Special equipment in competitive activities of powerlifters and dynamics of its manufacture

    Directory of Open Access Journals (Sweden)

    Kotendzhy L. V.

    2012-02-01

    Full Text Available There was reviewed the problem of use of ergogenic facilities in powerlifting, which makes it possible to expand representation about patterns of this kind of sport development. There was given comparative characteristic of applying special equipment of alternative international powerlifting organizations. There was researched the influence of special equipment on the effectiveness of powerlifters. There was studied the chronology of manufacture dynamics of special powerlifting equipment in different periods. There was grounded the necessity of changes in priorities for further understanding of the special powerlifting equipment taking into account aesthetic, social and ethical norms and its impact on the human body.

  9. Particle dispersing system and method for testing semiconductor manufacturing equipment

    Science.gov (United States)

    Chandrachood, Madhavi; Ghanayem, Steve G.; Cantwell, Nancy; Rader, Daniel J.; Geller, Anthony S.

    1998-01-01

    The system and method prepare a gas stream comprising particles at a known concentration using a particle disperser for moving particles from a reservoir of particles into a stream of flowing carrier gas. The electrostatic charges on the particles entrained in the carrier gas are then neutralized or otherwise altered, and the resulting particle-laden gas stream is then diluted to provide an acceptable particle concentration. The diluted gas stream is then split into a calibration stream and the desired output stream. The particles in the calibration stream are detected to provide an indication of the actual size distribution and concentration of particles in the output stream that is supplied to a process chamber being analyzed. Particles flowing out of the process chamber within a vacuum pumping system are detected, and the output particle size distribution and concentration are compared with the particle size distribution and concentration of the calibration stream in order to determine the particle transport characteristics of a process chamber, or to determine the number of particles lodged in the process chamber as a function of manufacturing process parameters such as pressure, flowrate, temperature, process chamber geometry, particle size, particle charge, and gas composition.

  10. 21 CFR 225.35 - Use of work areas, equipment, and storage areas for other manufacturing and storage purpose.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Use of work areas, equipment, and storage areas for other manufacturing and storage purpose. 225.35 Section 225.35 Food and Drugs FOOD AND DRUG... areas, equipment, and storage areas for other manufacturing and storage purpose. (a) Many manufacturers...

  11. Tool management in manufacturing systems equipped with CNC machines

    Directory of Open Access Journals (Sweden)

    Giovanni Tani

    1997-12-01

    Full Text Available This work has been carried out for the purpose of realizing an automated system for the integrated management of tools within a company. By integrating planning, inspection and tool-room functions, automated tool management can ensure optimum utilization of tools on the selected machines, guaranteeing their effective availability. The first stage of the work consisted of defining and developing a Tool Management System whose central nucleus is a unified Data Base for all of the tools, forming part of the company's Technological Files (files on machines, materials, equipment, methods, etc., interfaceable with all of the company departments that require information on tools. The system assigns code numbers to the individual components of the tools and file them on the basis of their morphological and functional characteristics. The system is also designed to effect assemblies of tools, from which are obtained the "Tool Cards" required for compiling working cycles (CAPP, for CAM programming and for the Tool-room where the tools are physically prepared. Methods for interfacing with suitable systems for the aforesaid functions have also been devised

  12. MODULAR RESEARCH EQUIPMENT FOR ON-LINE INSPECTION IN ADVANCED MANUFACTURING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Davrajh, S.

    2012-11-01

    Full Text Available The significance of inspection processes increases when producing parts with high levels of customer input. These processes must adapt to variations in significant product characteristics. Mass customisation and reconfigurable manufacturing are currently being researched as ways to respond to high levels of customer input. This paper presents the research and development of modular inspection equipment that was designed to meet the on-line quality requirements of mass customisation and reconfigurable manufacturing environments. Simulated results were analysed for application in an industrial environment. The implementation of the equipment in South Africa is briefly discussed. The research indicates that manufacturers need only invest in the required equipment configurations when they are needed for on-line inspection.

  13. Workshop on the Global Movement and Tracking of Chemical Manufacturing Equipment

    OpenAIRE

    Center on Contemporary Conflict

    2013-01-01

    FY 2013-2014. Project Lead: Kathryn Huges & Dorothy Zolandz Before Saddam Hussein co-opted pesticide production facilities in Iraq to produce chemical weapons, the world_s inspection and verification regimes were designed to govern large-scale chemical manufacturing facilities located within developed countries. Globalization has reduced the efficacy of the current inspection regimes and opened verification gaps through the proliferation of chemical manufacturing equipment and infrastruct...

  14. The Use of Animated Videos to Illustrate Oral Solid Dosage Form Manufacturing in a Pharmaceutics Course.

    Science.gov (United States)

    Yellepeddi, Venkata Kashyap; Roberson, Charles

    2016-10-25

    Objective. To evaluate the impact of animated videos of oral solid dosage form manufacturing as visual instructional aids on pharmacy students' perception and learning. Design. Data were obtained using a validated, paper-based survey instrument designed to evaluate the effectiveness, appeal, and efficiency of the animated videos in a pharmaceutics course offered in spring 2014 and 2015. Basic demographic data were also collected and analyzed. Assessment data at the end of pharmaceutics course was collected for 2013 and compared with assessment data from 2014, and 2015. Assessment. Seventy-six percent of the respondents supported the idea of incorporating animated videos as instructional aids for teaching pharmaceutics. Students' performance on the formative assessment in 2014 and 2015 improved significantly compared to the performance of students in 2013 whose lectures did not include animated videos as instructional aids. Conclusions. Implementing animated videos of oral solid dosage form manufacturing as instructional aids resulted in improved student learning and favorable student perceptions about the instructional approach. Therefore, use of animated videos can be incorporated in pharmaceutics teaching to enhance visual learning.

  15. The Use of Animated Videos to Illustrate Oral Solid Dosage Form Manufacturing in a Pharmaceutics Course

    Science.gov (United States)

    Roberson, Charles

    2016-01-01

    Objective. To evaluate the impact of animated videos of oral solid dosage form manufacturing as visual instructional aids on pharmacy students’ perception and learning. Design. Data were obtained using a validated, paper-based survey instrument designed to evaluate the effectiveness, appeal, and efficiency of the animated videos in a pharmaceutics course offered in spring 2014 and 2015. Basic demographic data were also collected and analyzed. Assessment data at the end of pharmaceutics course was collected for 2013 and compared with assessment data from 2014, and 2015. Assessment. Seventy-six percent of the respondents supported the idea of incorporating animated videos as instructional aids for teaching pharmaceutics. Students’ performance on the formative assessment in 2014 and 2015 improved significantly compared to the performance of students in 2013 whose lectures did not include animated videos as instructional aids. Conclusions. Implementing animated videos of oral solid dosage form manufacturing as instructional aids resulted in improved student learning and favorable student perceptions about the instructional approach. Therefore, use of animated videos can be incorporated in pharmaceutics teaching to enhance visual learning. PMID:27899837

  16. Equipment failures and their contribution to industrial incidents and accidents in the manufacturing industry.

    Science.gov (United States)

    Bourassa, Dominic; Gauthier, François; Abdul-Nour, Georges

    2016-01-01

    Accidental events in manufacturing industries can be caused by many factors, including work methods, lack of training, equipment design, maintenance and reliability. This study is aimed at determining the contribution of failures of commonly used industrial equipment, such as machines, tools and material handling equipment, to the chain of causality of industrial accidents and incidents. Based on a case study which aimed at the analysis of an existing pulp and paper company's accident database, this paper examines the number, type and gravity of the failures involved in these events and their causes. Results from this study show that equipment failures had a major effect on the number and severity of accidents accounted for in the database: 272 out of 773 accidental events were related to equipment failure, where 13 of them had direct human consequences. Failures that contributed directly or indirectly to these events are analyzed.

  17. 40 CFR 1054.612 - What special provisions apply for equipment manufacturers modifying certified nonhandheld engines?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What special provisions apply for..., SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Special Compliance Provisions § 1054.612 What special... engine manufacturer (such as exhaust backpressure) and you use a catalyst as described in the original...

  18. Determining the total cost of reverse supply chain operations for original equipment manufacturers

    DEFF Research Database (Denmark)

    Larsen, Samuel Brüning; Jacobsen, Peter

    2014-01-01

    When original equipment manufacturers (OEM) examine whether or not to invest in a reverse supply chain (RSC), managers need insight into not only the cost savings and new revenue streams the RSC enables, but also the total cost of the RSC itself. Using case study research the study examines what...

  19. THE IMPACT OF OVERALL EQUIPMENT EFFECTIVENESS ON PRODUCTION LOSSES IN MOGHAN CABLE & WIRE MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Ladan Hassani

    2015-12-01

    Full Text Available OEE is one of the most popular methods of evaluation of the performance in the manufacturing process to identify and eliminate the causes of production losses. This study has a significant importance due to demonstrating the existing loss and identifying indicators of OEE and their impact on production losses. The main purpose of this study is to minimize the losses of equipment by utilizing the available resources. For this purpose, Moghan Cable & Wire Manufacturing Company was selected as a case study. After collecting equipment data, a questionnaire was designed that its validity was approved by group of experts and its reliability was calculated by using Cronbach's alpha method which was equal to 0.901. Data were analyzed by Structural Equation Model, in order to examine the relationship between variables. The results showed that the high levels of overall equipment effectiveness have a significant impact on the reduction of production losses.

  20. The association of occupational metals exposure and oxidative damage, telomere shortening in fitness equipments manufacturing workers.

    Science.gov (United States)

    Ko, Jiunn-Liang; Cheng, Yu-Jung; Liu, Guan-Cen; Hsin, I-Lun; Chen, Hsiu-Ling

    2017-08-08

    The welding is the major working process in fitness equipment manufacturing industry, and International Agency for Research on Cancer has classified welding fumes as possibly carcinogenic to humans (Group 2B). The present study aimed to evaluate associations between the occupational exposure of metals and oxidative damage and telomere length shortening in workers involved in the manufacture of fitness equipment. The blood metal concentrations were monitored and malondialdehyde (MDA), alkaline Comet assay was determined as oxidative damage in 117 workers from two representative fitness equipment manufacturing plants. MDA levels varied according to workers' roles at the manufacturing plants, and showed a trend as cutting>painting>welding>administration workers. Welders had marginally shorter average telomere lengths than the administrative workers (p=0.058). Cr and Mn levels were significantly greater in welders than they were in administrative workers. There were significantly positive correlations between MDA and Cr and Mn levels, the major components of welding fume. However, the association would be eliminated if co-metals exposure were considered simultaneously. In future, telomere length and MDA might be potential biomarkers for predicting cardiovascular disease in co-metals exposed workers.

  1. Development of an Improved Process for Installation Projects of High Technology Manufacturing Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Quintana, Sarah V. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-04-30

    High technology manufacturing equipment is utilized at Los Alamos National Laboratory (LANL) to support nuclear missions. This is undertaken from concept initiation where equipment is designed and then taken through several review phases, working closely with system engineers (SEs) responsible for each of the affected systems or involved disciplines (from gasses to HVAC to structural, etc.). After the design is finalized it moves to procurement and custom fabrication of the equipment and equipment installation, including all of the paperwork involved. Not only are the engineering and manufacturing aspects important, but also the scheduling, financial forecasting, and planning portions that take place initially and are sometimes modified as the project progresses should requirements, changes or additions become necessary. The process required to complete a project of this type, including equipment installation, is unique and involves numerous steps to complete. These processes can be improved and recent work on the Direct Current Arc (DC Arc) Glovebox Design, Fabrication and Installation Project provides an opportunity to identify some important lessons learned (LL) that can be implemented in the future for continued project improvement and success.

  2. Simulating The Technological Movements Of The Equipment Used For Manufacturing Prosthetic Devices Using 3D Models

    Science.gov (United States)

    Chicea, Anca-Lucia

    2015-09-01

    The paper presents the process of building geometric and kinematic models of a technological equipment used in the process of manufacturing devices. First, the process of building the model for a six axes industrial robot is presented. In the second part of the paper, the process of building the model for a five-axis CNC milling machining center is also shown. Both models can be used for accurate cutting processes simulation of complex parts, such as prosthetic devices.

  3. Overall Environmental Equipment Effectiveness as a Metric of a Lean and Green Manufacturing System

    Directory of Open Access Journals (Sweden)

    Rosario Domingo

    2015-07-01

    Full Text Available This paper presents a new metric for describing the sustainability improvements achieved, relative to the company’s initial situation, after implementing a lean and green manufacturing system. The final value of this metric is identified as the Overall Environmental Equipment Effectiveness (OEEE, which is used to analyze the evolution between two identified states of the Overall Equipment Effectiveness (OEE and the sustainability together, and references, globally and individually, the production steps. The OEE is a known measure of equipment utilization, which includes the availability, quality and performance of each production step, In addition to these factors, the OEEE incorporates the concept of sustainability based on the calculated environmental impact of the complete product life cycle. Action research based on the different manufacturing processes of a tube fabrication company is conducted to assess the potential impact of this new indicator. The case study demonstrates the compatibility between green and lean manufacturing, using a common metric. The OEEE allows sustainability to be integrated into business decisions, and compares the environmental impact of two states, by identifying the improvements undertaken within the company’s processes.

  4. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing.

    Directory of Open Access Journals (Sweden)

    Hao Xiao

    Full Text Available The rise of global value chains (GVCs characterized by the so-called "outsourcing", "fragmentation production", and "trade in tasks" has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014 and Wang et al. (2013 in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics.

  5. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing

    Science.gov (United States)

    Meng, Bo; Cheng, Lihong

    2017-01-01

    The rise of global value chains (GVCs) characterized by the so-called “outsourcing”, “fragmentation production”, and “trade in tasks” has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014) and Wang et al. (2013) in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics. PMID:28081201

  6. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing.

    Science.gov (United States)

    Xiao, Hao; Sun, Tianyang; Meng, Bo; Cheng, Lihong

    2017-01-01

    The rise of global value chains (GVCs) characterized by the so-called "outsourcing", "fragmentation production", and "trade in tasks" has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014) and Wang et al. (2013) in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics.

  7. Report From BPTCS Project Team On Evaluation Of Additive Manufacturing For Pressure Retaining Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rawls, G. [Savannah River Site (SRS), Aiken, SC (United States)

    2016-09-22

    ASME is evaluating the use of additive manufacturing (AM) for the construction of pressure equipment. The information in this report assesses available AM technologies for direct metal fabrication of pressure equipment. Background information is included in the report to provide context for those not experienced in AM technology. Only commercially available technologies for direct metal fabrication are addressed in the report because these AM methods are the only viable approaches for the construction of pressure equipment. Metal AM technologies can produce near-net shape parts by using multiple layers of material from a three dimensional (3D) design model of the geometry. Additive manufacturing of metal components was developed from polymer based rapid prototyping or 3D printing. At the current maturity level, AM application for pressure equipment has the potential to reduce delivery times and costs for complex shapes. AM will also lead to a reduction in the use of high cost materials, since parts can be created with corrosion resistant layers of high alloy material and structural layers of lower cost materials.

  8. A Decision Optimization Model for Leased Manufacturing Equipment with Warranty under Forecasting Production/Maintenance Problem

    Directory of Open Access Journals (Sweden)

    Zied Hajej

    2015-01-01

    Full Text Available Due to the expensive production equipment, many manufacturers usually lease production equipment with a warranty period during a finite leasing horizon, rather than purchasing them. The lease contract contains the possibility of obtaining an extended warranty for a given additional cost. In this paper, based on the forecasting production/maintenance optimization problem, we develop a mathematical model to study the lease contract with basic and extended warranty based on win-win relationship between the lessee and the lessor. The influence of the production rates in the equipment degradation consequently on the total cost by each side during the finite leasing horizon is stated in order to determine a theoretical condition under which a compromise-pricing zone exists under different possibilities of maintenance policies.

  9. Equipment and analytical companies meeting continuous challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

    2015-03-01

    This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white

  10. The estimation of the technogenic influence on the environment of different types of manufacturing equipment for the bituminous concrete preparation

    OpenAIRE

    Pozdniakova, O.; Timohina, Ya

    2006-01-01

    The analysis of advisability of manufacturing equipment substitution at the bituminous concrete factory according to ecological operation-factors and the estimation of the influence on the environment has been carried out.

  11. How the reverse supply chain impacts the financial performance of original equipment manufacturers

    OpenAIRE

    Larsen, Samuel; Jacobsen, Peter

    2017-01-01

    This thesis examines the financial impact of a firm’s reverse supply chain (RSC). Specifically, the thesis examines the two questions of how the RSC can contribute to the financial performance of the firm and which factors are decisive for the RSC’s financial contribution. The thesis focuses on original equipment manufacturers. The thesis results show that the RSC can contribute to the financial performance of the firm in more than 20 different ways, which the thesis defines as functions of t...

  12. Automatic differentiation for gradient-based optimization of radiatively heated microelectronics manufacturing equipment

    Energy Technology Data Exchange (ETDEWEB)

    Moen, C.D.; Spence, P.A.; Meza, J.C.; Plantenga, T.D.

    1996-12-31

    Automatic differentiation is applied to the optimal design of microelectronic manufacturing equipment. The performance of nonlinear, least-squares optimization methods is compared between numerical and analytical gradient approaches. The optimization calculations are performed by running large finite-element codes in an object-oriented optimization environment. The Adifor automatic differentiation tool is used to generate analytic derivatives for the finite-element codes. The performance results support previous observations that automatic differentiation becomes beneficial as the number of optimization parameters increases. The increase in speed, relative to numerical differences, has a limited value and results are reported for two different analysis codes.

  13. The Renal Toxicity of Welding Fumes in Heavy Equipment Manufacturer Workers

    Directory of Open Access Journals (Sweden)

    Mulyana

    2015-09-01

    Full Text Available Exposure to welding fumes in the workplace has been associated with decreasing renal function. We studied renal function parameters in men workers from heavy equipment manufacturer exposed to welding fumes. This study aimed to evaluate renal function status among worker exposed to welding fumes. A case-control design, random study, was conducted among welder (35 subjects and non welder (35 subjects with more than 1 years experience in the same job task in a heavy equipment manufacturer. All subjects were completed physical examination, informed consent, questionnaire and laboratory tests. Renal function was measured as creatinine serum using enzimatic method. Urinary heavy metals level was analyzed using inductively coupled plasma mass spectrometry. Comparisson analysis between group was performed to determined median level for each variable. Linear regression model was developed to predict renal function function parameter status urinary heavy metals level as variable. This study showed there were higher creatinine serum, chromium, iron, manganese and nickel in welder than non welder(p<0.05. After multivariate analysis, urinary nickel is a predictor for renal function status among welder. Exposure to welding fumes was significantly correlated with renal function status in welder. Nickel is the predictive variable for renal function. Although statistically significant but in clinical field needs carefully interpreting data.

  14. Characterization of ambient particles size in workplace of manufacturing physical fitness equipments

    Science.gov (United States)

    LIN, Chih-Chung; CHEN, Mei-Ru; CHANG, Sheng-Lang; LIAO, Wei-Heng; CHEN, Hsiu-Ling

    2014-01-01

    The manufacturing of fitness equipment involves several processes, including the cutting and punching of iron tubes followed by welding. Welding operations produce hazardous gases and particulate matter, which can enter the alveolar, resulting in adverse health effects. This study sought to verify the particle size distribution and exposure concentrations of atmospheric air samples in various work areas of a fitness equipment manufacturing industry. Observed particle concentrations are presented by area and in terms of relative magnitude: painting (15.58 mg/m3) > automatic welding (0.66 mg/m3) > manual welding (0.53 mg/m3) > punching (0.18 mg/m3) > cutting (0.16 mg/m3). The concentrations in each of the five work areas were Cinh>Cthor>Cresp. In all areas except the painting area, extra-fine particles produced by welding at high temperatures, and further those coagulated to form larger particles. This study observed bimodal distribution in the size of welding fume in the ranges of 0.7–1 µm and 15–21 µm. Meanwhile, the mass concentrations of particles with different sizes were not consistent across work areas. In the painting area, the mass concentration was higher in Chead>Cth>Calv, but in welding areas, it was found that Calv>Chead>Cth. Particles smaller than 1µm were primarily produced by welding. PMID:25327301

  15. Characterization of ambient particles size in workplace of manufacturing physical fitness equipments.

    Science.gov (United States)

    Lin, Chih-Chung; Chen, Mei-Ru; Chang, Sheng-Lang; Liao, Wei-Heng; Chen, Hsiu-Ling

    2015-01-01

    The manufacturing of fitness equipment involves several processes, including the cutting and punching of iron tubes followed by welding. Welding operations produce hazardous gases and particulate matter, which can enter the alveolar, resulting in adverse health effects. This study sought to verify the particle size distribution and exposure concentrations of atmospheric air samples in various work areas of a fitness equipment manufacturing industry. Observed particle concentrations are presented by area and in terms of relative magnitude: painting (15.58 mg/m(3)) > automatic welding (0.66 mg/m(3)) > manual welding (0.53 mg/m(3)) > punching (0.18 mg/m(3)) > cutting (0.16 mg/m(3)). The concentrations in each of the five work areas were Cinh>Cthor>Cresp. In all areas except the painting area, extra-fine particles produced by welding at high temperatures, and further those coagulated to form larger particles. This study observed bimodal distribution in the size of welding fume in the ranges of 0.7-1 µm and 15-21 µm. Meanwhile, the mass concentrations of particles with different sizes were not consistent across work areas. In the painting area, the mass concentration was higher in Chead>Cth>Calv, but in welding areas, it was found that Calv>Chead>Cth. Particles smaller than 1 µm were primarily produced by welding.

  16. Analysis on critical success factors for agile manufacturing evaluation in original equipment manufacturing industry-an AHP approach

    Science.gov (United States)

    Ajay Guru Dev, C.; Senthil Kumar, V. S.

    2016-09-01

    Manufacturing industries are facing challenges in the implementation of agile manufacturing in their products and processes. Agility is widely accepted as a new competitive concept in the manufacturing sector in fulfilling varying customer demand. Thus, evaluation of agile manufacturing in industries has become a necessity. The success of an organisation depends on its ability to manage finding the critical success factors and give them special and continued attention in order to bring about high performance. This paper proposes a set of critical success factors (CSFs) for evaluating agile manufacturing considered appropriate for the manufacturing sector. The analytical hierarchy process (AHP) method is applied for prioritizing the success factors, by summarizing the opinions of experts. It is believed that the proposed CSFs enable and assist manufacturing industries to achieve a higher performance in agile manufacturing so as to increase competitiveness.

  17. Risk assessment of manufacturing equipment surfaces contaminated with DDTs and dicofol.

    Science.gov (United States)

    Luo, Fei; Song, Jing; Chen, Meng-Fang; Wei, Jing; Pan, Yun-Yu; Yu, Hai-Bo

    2014-01-15

    Decommissioning of manufacturing plant in the chemical industry includes inspection of the surfaces of production equipment for potential contamination and associated health risks. In the present study wipe-samples were taken from the surfaces of dicofol manufacturing equipment at a chemical factory in north China and analyzed for chemicals of concern (COCs). Occupational hygiene assessment was conducted to assess the risks to demolition workers and health risk assessment was performed to evaluate the risks to demolition and general industrial workers. The concentrations of COCs on the equipment surfaces were found to be 0.54-3.75 × 10(4)mg DDTs m(-2) and 0.15-4.38 × 10(3)mg dicofolm(-2). The average concentration of p,p'-DDT does not represent an unacceptable risk to the demolition workers using occupational hygiene assessment. Under the industrial scenario the carcinogenic risks of COCs ranged from 2.28 × 10(-7) to 1.79 × 10(-2) for p,p'-DDT, 6.18 × 10(-7) to 3.04 × 10(-3) for p,p'-DDD and 1.89 × 10(-6) to 0.16 for p,p'-DDE. The non-carcinogenic hazard indices ranged from 3.86 × 10(-3) to 3.03 × 10(2) for p,p'-DDT and 1.16 × 10(-3) to 33.94 for dicofol. Both carcinogenic risk and hazard index of COCs under the industrial scenario were higher than under the demolition scenario. Oral ingestion and dermal contact were the major pathways and accounted for >88% of the total exposure of COCs. Parameter sensitivity analysis shows that equipment surface concentration (Cs), frequency of contact with surface (EV), fraction of dust transferred from surface to skin (FTss) and exposure frequency (EF) were the most sensitive parameters and these should be acquired on a site-specific basis. The accuracy of the risk assessment was controlled largely by the variation in the sensitive parameters and the uncertainty of the exposure model for the inhalation pathway. © 2013.

  18. Modification and Validation of an Automotive Data Processing Unit, Compessed Video System, and Communications Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.

    1997-04-01

    The primary purpose of the "modification and validation of an automotive data processing unit (DPU), compressed video system, and communications equipment" cooperative research and development agreement (CRADA) was to modify and validate both hardware and software, developed by Scientific Atlanta, Incorporated (S-A) for defense applications (e.g., rotary-wing airplanes), for the commercial sector surface transportation domain (i.e., automobiles and trucks). S-A also furnished a state-of-the-art compressed video digital storage and retrieval system (CVDSRS), and off-the-shelf data storage and transmission equipment to support the data acquisition system for crash avoidance research (DASCAR) project conducted by Oak Ridge National Laboratory (ORNL). In turn, S-A received access to hardware and technology related to DASCAR. DASCAR was subsequently removed completely and installation was repeated a number of times to gain an accurate idea of complete installation, operation, and removal of DASCAR. Upon satisfactory completion of the DASCAR construction and preliminary shakedown, ORNL provided NHTSA with an operational demonstration of DASCAR at their East Liberty, OH test facility. The demonstration included an on-the-road demonstration of the entire data acquisition system using NHTSA'S test track. In addition, the demonstration also consisted of a briefing, containing the following: ORNL generated a plan for validating the prototype data acquisition system with regard to: removal of DASCAR from an existing vehicle, and installation and calibration in other vehicles; reliability of the sensors and systems; data collection and transmission process (data integrity); impact on the drivability of the vehicle and obtrusiveness of the system to the driver; data analysis procedures; conspicuousness of the vehicle to other drivers; and DASCAR installation and removal training and documentation. In order to identify any operational problems not captured by the systems

  19. 19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S... CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Automotive Products § 10.84 Automotive...

  20. A study on the manufacturing decision-making and optimization of hybrid-channel supply chain for original equipment manufacturer

    National Research Council Canada - National Science Library

    X D Zhu; B Y Li; Z Wang

    2017-01-01

    .... When manufacturers have both OEM channels and direct sales, the competition and cooperation relationships between them and the brand owners become even more complicated when the hybrid channels exist...

  1. Software for improving the quality of project management, a case study: international manufacture of electrical equipment

    Science.gov (United States)

    Preradović, D. M.; Mićić, Lj S.; Barz, C.

    2017-05-01

    Production conditions in today’s world require software support at every stage of production and development of new products, for quality assurance and compliance with ISO standards. In addition to ISO standards such as usual metrics of quality, companies today are focused on other optional standards, such as CMMI (Capability Maturity Model Integrated) or prescribing they own standards. However, while there is intensive progress being made in the PM (project management), there is still a significant number of projects, at the global level, that are failures. These have failed to achieve their goals, within budget or timeframe. This paper focuses on checking the role of software tools through the rate of success in projects implemented in the case of internationally manufactured electrical equipment. The results of this research show the level of contribution of the project management software used to manage and develop new products to improve PM processes and PM functions, and how selection of the software tools affects the quality of PM processes and successfully completed projects.

  2. Academic Performance of Indigenous Issues- Taking Original Equipment Manufacturer Research as an Example

    Directory of Open Access Journals (Sweden)

    Hong-Jiang Yue

    2017-06-01

    Full Text Available Advocated for the localization of international issues under the voice of meaningful research has become increasingly high, after 30 years of development, original equipment manufacturer (OEM phenomenon as a living localization issues exist. This paper is a systematic review of the bibliometrics, which is a typical indigenous topic, which can be traced to the interpretation of Chinese scholars and its unique performance. The study found: (1 The academic community on the local issues - OEM phenomenon is response, but far from showing a prosperous situation; (2 Intensive units engaged in OEM research mainly concentrated in the Pearl River Delta and the Yangtze River Delta region of several key universities, which is with other research topics throughout the country blossom everywhere in the different characteristics; (3 Collaborative research is the main theme of foundry research, in the middle-aged scholars and young students in the mode of cooperation, the formation of “student first” and “professor second” two common modes of cooperation; (4 OEM research results are distributed in the field of industrial industries, but also covers business management and other economic management areas; (5 OEM research mainly formed a “global value chain” as the center of the macro-level expansion of economic research-oriented trends and “OEM enterprises” as the center of the expansion of business management level of management research-oriented trends; (6 The academic achievements of OEM research more from the English literature to find the theoretical basis for research, independent discovery and construction of the foundry “Chinese theory” is more than the lack of; (7 OEM research, both empirical research and case studies are more deductive way to verify the Western theory, the lack of a paradigm of the development of local unique theoretical contribution; (8 The state and central departments funding is an important research model of OEM

  3. A practice based approach to further high level reuse in equipment manufacturing

    NARCIS (Netherlands)

    Dimitri van de Kelft; Dr. ir. Jan Venselaar

    2014-01-01

    An effective option for companies to implement circular economy concepts is reuse and remanufacturing. It concerns the (re)use of modules and parts of used and discarded equipment in ‘as new’ or ‘first class’ reused equipment. It is not just an effective way to reuse materials; it is

  4. 40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

    Science.gov (United States)

    2010-07-01

    ... your engine supplier to design products. (iii) Describe the engineering or technical problems causing...) Describe any information or products you received from your engine supplier related to equipment design... will be using for the equipment exempted under this section. (E) Your best estimate of the number of...

  5. A customised lean model for a Chinese aerospace OEM (Original Equipment Manufacturer)

    OpenAIRE

    Li, Chao

    2011-01-01

    The aim of this research is to introduce Lean Thinking in a systematic and cost effective way; moreover, it is to bring Lean Principles and apply Lean Tools to the new aerospace companies. In particular the research will develop a customised Lean manufacturing model. The following objectives will be achieved during the research. 1); Investigate the principal features of Lean Thinking, and identify state of the art in Lean manufacturing implementation. 2); Identify the curren...

  6. High-speed three-frame image recording system using colored flash units and low-cost video equipment

    Science.gov (United States)

    Racca, Roberto G.; Scotten, Larry N.

    1995-05-01

    This article describes a method that allows the digital recording of sequences of three black and white images at rates of several thousand frames per second using a system consisting of an ordinary CCD camcorder, three flash units with color filters, a PC-based frame grabber board and some additional electronics. The maximum framing rate is determined by the duration of the flashtube emission, and for common photographic flash units lasting about 20 microsecond(s) it can exceed 10,000 frames per second in actual use. The subject under study is strobe- illuminated using a red, a green and a blue flash unit controlled by a special sequencer, and the three images are captured by a color CCD camera on a single video field. Color is used as the distinguishing parameter that allows the overlaid exposures to be resolved. The video output for that particular field will contain three individual scenes, one for each primary color component, which potentially can be resolved with no crosstalk between them. The output is electronically decoded into the primary color channels, frame grabbed and stored into digital memory, yielding three time-resolved images of the subject. A synchronization pulse provided by the flash sequencer triggers the frame grabbing so that the correct video field is acquired. A scheme involving the use of videotape as intermediate storage allows the frame grabbing to be performed using a monochrome video digitizer. Ideally each flash- illuminated scene would be confined to one color channel, but in practice various factors, both optical and electronic, affect color separation. Correction equations have been derived that counteract these effects in the digitized images and minimize 'ghosting' between frames. Once the appropriate coefficients have been established through a calibration procedure that needs to be performed only once for a given configuration of the equipment, the correction process is carried out transparently in software every time a

  7. Development of Technology and Equipment of the Automated Laser Welding for Manufacturing Heat Exchanger Details of Marine Engines

    Directory of Open Access Journals (Sweden)

    Shelyagin, V.D.

    2014-09-01

    Full Text Available Based on the developed automated laser welding technology for flat tubes of copper-nickel alloys laser welding complex technological equipment, which can be applied on the enterprises of machine building, aerospace, shipbuilding and automobile industries, was designed and created. To control the integrity of welded flat tubes a technique, which consists in testing sample pressure and finding defective sections by laser interferometry in the automated mode, was developed. Specialized welding head was designed and manufactured for the industrial use of the developed laser welding technology.

  8. New materials for auxiliary equipments manufacturing. Nuevos materiales para la construccion de bienes de equipo

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Zayas, J. (Dto. Ingenieria Quimica y Metalurgia. Universidad de Barcelona (Spain))

    1993-07-01

    Some specific operational conditions at industrial chemical processes might oblige the conventional materials used for auxiliary equipments to be substituted by new materials like new steel alloys, non-ferrous metals, ceramics, composites, etc.. This article studies the characteristics, applications and types of new materials. (Author)

  9. 40 CFR 1054.130 - What installation instructions must I give to equipment manufacturers?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What installation instructions must I...-IGNITION ENGINES AND EQUIPMENT Emission Standards and Related Requirements § 1054.130 What installation..., this may include specified limits for catalyst systems, such as exhaust backpressure, catalyst location...

  10. 40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

    Science.gov (United States)

    2010-07-01

    ... allowances only for the specific equipment models covered by your request. (5) For purposes of this paragraph... allowance for a specific number of exempted engines under this section using one of the following approaches.... You must add a permanent label, written legibly in English, to the engine or another readily visible...

  11. Development of Functionally Graded Materials for Manufacturing Tools and Dies and Industrial Processing Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Lherbier, Louis, W.; Novotnak, David, J.; Herling, Darrell, R.; Sears, James, W.

    2009-03-23

    Hot forming processes such as forging, die casting and glass forming require tooling that is subjected to high temperatures during the manufacturing of components. Current tooling is adversely affected by prolonged exposure at high temperatures. Initial studies were conducted to determine the root cause of tool failures in a number of applications. Results show that tool failures vary and depend on the operating environment under which they are used. Major root cause failures include (1) thermal softening, (2) fatigue and (3) tool erosion, all of which are affected by process boundary conditions such as lubrication, cooling, process speed, etc. While thermal management is a key to addressing tooling failures, it was clear that new tooling materials with superior high temperature strength could provide improved manufacturing efficiencies. These efficiencies are based on the use of functionally graded materials (FGM), a new subset of hybrid tools with customizable properties that can be fabricated using advanced powder metallurgy manufacturing technologies. Modeling studies of the various hot forming processes helped identify the effect of key variables such as stress, temperature and cooling rate and aid in the selection of tooling materials for specific applications. To address the problem of high temperature strength, several advanced powder metallurgy nickel and cobalt based alloys were selected for evaluation. These materials were manufactured into tooling using two relatively new consolidation processes. One process involved laser powder deposition (LPD) and the second involved a solid state dynamic powder consolidation (SSDPC) process. These processes made possible functionally graded materials (FGM) that resulted in shaped tooling that was monolithic, bi-metallic or substrate coated. Manufacturing of tooling with these processes was determined to be robust and consistent for a variety of materials. Prototype and production testing of FGM tooling showed the

  12. New electro-mechanical equipment manufactured by the ESO factory of Titovo Velenje

    Energy Technology Data Exchange (ETDEWEB)

    1983-04-01

    In close cooperation with the Dowty Company the ESO factory has produced the DOWVAL hydraulic controlling unit for monitoring fully automated longwalls. The share of Yugoslav parts in this unit is 30%. In the next series of DOWVAL control units the Yugoslav share will increase to 60%. The unit has 32 functions. The annual production of DOWVAL units by the ESO factory will be 200 pieces, which will cover the needs of the Yugoslav coal mining industry. Export of the equipment is foreseen. The factory's production program is described.

  13. The design of the automated control system for warehouse equipment under radio-electronic manufacturing

    Science.gov (United States)

    Kapulin, D. V.; Chemidov, I. V.; Kazantsev, M. A.

    2017-01-01

    In the paper, the aspects of design, development and implementation of the automated control system for warehousing under the manufacturing process of the radio-electronic enterprise JSC «Radiosvyaz» are discussed. The architecture of the automated control system for warehousing proposed in the paper consists of a server which is connected to the physically separated information networks: the network with a database server, which stores information about the orders for picking, and the network with the automated storage and retrieval system. This principle allows implementing the requirements for differentiation of access, ensuring the information safety and security requirements. Also, the efficiency of the developed automated solutions in terms of optimizing the warehouse’s logistic characteristics is researched.

  14. Apparatus and method of manufacture for an imager equipped with a cross-talk barrier

    Science.gov (United States)

    Pain, Bedabrata (Inventor)

    2012-01-01

    An imager apparatus and associated starting material are provided. In one embodiment, an imager is provided including a silicon layer of a first conductivity type acting as a junction anode. Such silicon layer is adapted to convert light to photoelectrons. Also included is a semiconductor well of a second conductivity type formed in the silicon layer for acting as a junction cathode. Still yet, a barrier is formed adjacent to the semiconductor well. In another embodiment, a starting material is provided including a first silicon layer and an oxide layer disposed adjacent to the first silicon layer. Also included is a second silicon layer disposed adjacent to the oxide layer opposite the first silicon layer. Such second silicon layer is further equipped with an associated passivation layer and/or barrier.

  15. Bismuth Infusion of ABS Enables Additive Manufacturing of Complex Radiological Phantoms and Shielding Equipment.

    Science.gov (United States)

    Ceh, Justin; Youd, Tom; Mastrovich, Zach; Peterson, Cody; Khan, Sarah; Sasser, Todd A; Sander, Ian M; Doney, Justin; Turner, Clark; Leevy, W Matthew

    2017-02-24

    Radiopacity is a critical property of materials that are used for a range of radiological applications, including the development of phantom devices that emulate the radiodensity of native tissues and the production of protective equipment for personnel handling radioactive materials. Three-dimensional (3D) printing is a fabrication platform that is well suited to creating complex anatomical replicas or custom labware to accomplish these radiological purposes. We created and tested multiple ABS (Acrylonitrile butadiene styrene) filaments infused with varied concentrations of bismuth (1.2-2.7 g/cm³), a radiopaque metal that is compatible with plastic infusion, to address the poor gamma radiation attenuation of many mainstream 3D printing materials. X-ray computed tomography (CT) experiments of these filaments indicated that a density of 1.2 g/cm³ of bismuth-infused ABS emulates bone radiopacity during X-ray CT imaging on preclinical and clinical scanners. ABS-bismuth filaments along with ABS were 3D printed to create an embedded human nasocranial anatomical phantom that mimicked radiological properties of native bone and soft tissue. Increasing the bismuth content in the filaments to 2.7 g/cm³ created a stable material that could attenuate 50% of 99mTechnetium gamma emission when printed with a 2.0 mm wall thickness. A shielded test tube rack was printed to attenuate source radiation as a protective measure for lab personnel. We demonstrated the utility of novel filaments to serve multiple radiological purposes, including the creation of anthropomorphic phantoms and safety labware, by tuning the level of radiation attenuation through material customization.

  16. Analysis of dust removal equipment used in the manufacture of soluble powders

    Directory of Open Access Journals (Sweden)

    E. A. Rudyka

    2016-01-01

    Full Text Available Analyzed the system of drying plant air cleaning, specializing in the production of food powders, dust emission identified place in the shop drying in the production of soluble dietary powders, the parameters of the dryer exhaust coolant, analyzed the properties of the product, as well as determined the effectiveness of the use of air purification equipment. Analyzed used at the enterprise two-stage cleaning system. As a first purification stage conical cyclone installed as a second stage purification analyzed dust collector is proposed with internal circulation of the liquid. It was found that the drying of the powder contained in the emissions of a large proportion of the fine fraction of dust. Several studies have been conducted with this food dust. It was found that the collection efficiency in the cyclone ranged from 68% (tea dust to 92% (dust kvass wort. Analyzing the data obtained indicated that the efficiency of cleaning exhaust coolant is heavily dependent on the food composition of disperse dust, and less than 10 microns particles is insufficient. It is proposed to use for cleaning the coolant wet dust collector with internal circulation of the liquid. The regularities of change of concentration of solids in the cleaning liquid, its viscosity and surface tension with increasing operating time since the start of the dust collector. It is found that increasing the concentration of solids in the cleaning liquid increases with the operating time of the machine since the start-up leads to changes in surface tension and viscosity of the liquid. It is shown that the effective dust collection in the machine decreases as the viscosity of the working fluid. Both theoretically and experimentally established patterns may be used when calculating the optimum specific liquid flow to provide effective cleaning and releases the trapped product return process cycle.

  17. Bismuth Infusion of ABS Enables Additive Manufacturing of Complex Radiological Phantoms and Shielding Equipment

    Directory of Open Access Journals (Sweden)

    Justin Ceh

    2017-02-01

    Full Text Available Radiopacity is a critical property of materials that are used for a range of radiological applications, including the development of phantom devices that emulate the radiodensity of native tissues and the production of protective equipment for personnel handling radioactive materials. Three-dimensional (3D printing is a fabrication platform that is well suited to creating complex anatomical replicas or custom labware to accomplish these radiological purposes. We created and tested multiple ABS (Acrylonitrile butadiene styrene filaments infused with varied concentrations of bismuth (1.2–2.7 g/cm3, a radiopaque metal that is compatible with plastic infusion, to address the poor gamma radiation attenuation of many mainstream 3D printing materials. X-ray computed tomography (CT experiments of these filaments indicated that a density of 1.2 g/cm3 of bismuth-infused ABS emulates bone radiopacity during X-ray CT imaging on preclinical and clinical scanners. ABS-bismuth filaments along with ABS were 3D printed to create an embedded human nasocranial anatomical phantom that mimicked radiological properties of native bone and soft tissue. Increasing the bismuth content in the filaments to 2.7 g/cm3 created a stable material that could attenuate 50% of 99mTechnetium gamma emission when printed with a 2.0 mm wall thickness. A shielded test tube rack was printed to attenuate source radiation as a protective measure for lab personnel. We demonstrated the utility of novel filaments to serve multiple radiological purposes, including the creation of anthropomorphic phantoms and safety labware, by tuning the level of radiation attenuation through material customization.

  18. An improvement of agricultural equipment manufacturing by using lean techniques : A case study of agricultural machinery company

    Directory of Open Access Journals (Sweden)

    Nattariya Pakdeepunya

    2015-06-01

    Full Text Available The objective of this research was to study and improve the manufacturing process of agricultural equipment to reduce wastes by using the LEAN tools: a case study of agricultural machinery company. This study found that the main wastes were inefficiency of transportation and working process. The Systematic Layout Planning Pattern (SLP had been applied. Moreover, the principles of ECRS, the change in input factors (a number of employees, together with simulation and the Analysis Hierarchy Process (AHP were also used to determine the appropriate plant layout alternatives by considering the factors such as the productivity, materials handling distance, facilities utilization, and space utilization. The result shared that the best suitable layout is the layout No. 1. Then more improvement the layout No. 1 with the ECRS and the change of input factors (the amount of employees ,it was found that increased productivity by 16.10%, increased facilities utilization by 15.73% and decreased materials handling distance by 48.12%. Furthermore, the number of employees and the average time of workpiece in system could be reduced from 7 to 6 persons, and 54.41 minutes to 45.65 minutes respectively.

  19. Cost-Benefit Analysis and Assessment of Ergonomic Interventions Effects: Case Study Boiler and Equipment Engineering and Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Iraj Mohammad faam

    2015-12-01

    Full Text Available Background & Objectives: In Economic and competitive world today,cost-benefit analysis is one of the most important parameters for any intervention.The purpose of thisstudy was cost-benefit analysis of ergonomic interventions effects in Boiler and Equipment Engineering and Manufacturing Company. Methods:At first all workstations of the company assessed using QEC. Thenthose earned more than 70% in QEC assessed by OWAS. By analyzing the results of these two methods, the “Haarp welding” workstation selected as the critical one. After presentation of possible solutions in specialized committee, the final solution selected and cost-benefit analysis done by CyberManS tool. Finally after implementing the intervention workstation reassessed. Findings:The results of the survey showed that the final score of assessment using QEC, OWAS and NASA-TLX before the intervention was 84.7%, 3 and 75.4, respectively and after the intervention was 47.5%, 1 and 42.7 that witnesses a significant reduction in all three methods of assessment. Also the result of cost-benefit analysis by CyberManS showed that by spending 110 million rials after 1.5 years the investment returned and profitability initiated. Conclusion:In addition to reducing the risk of musculoskeletal disorders, ergonomic interventions have financial benefits by increasing the productivity and production, reducing the compensation and the lost work days can also cause financial benefits.

  20. Multiple Generations on Video Tape Recorders.

    Science.gov (United States)

    Wiens, Jacob H.

    Helical scan video tape recorders were tested for their dubbing characteristics in order to make selection data available to media personnel. The equipment, two recorders of each type tested, was submitted by the manufacturers. The test was designed to produce quality evaluations for three generations of a single tape, thereby encompassing all…

  1. 40 CFR 1060.210 - What records should equipment manufacturers keep if they do not apply for certification?

    Science.gov (United States)

    2010-07-01

    ... IN-USE NONROAD AND STATIONARY EQUIPMENT Certifying Emission Families § 1060.210 What records should... family names of the certificates that will cover your equipment, the part numbers of those certified... information for each piece of equipment you produce. (c) Describe how you comply with any emission-related...

  2. Exploring Manganese Fractionation Using a Sequential Extraction Method to Evaluate Welders' Gas Metal Arc Welding Exposures during Heavy Equipment Manufacturing.

    Science.gov (United States)

    Hanley, Kevin W; Andrews, Ronnee; Bertke, Steven; Ashley, Kevin

    2017-01-01

    The National Institute for Occupational Safety and Health (NIOSH) has conducted an occupational exposure assessment study of manganese (Mn) in welding fume at three factories where heavy equipment was manufactured. The objective of this study was to evaluate exposures to different Mn fractions using a sequential extraction procedure. One hundred nine worker-days were monitored for either total or respirable Mn during gas metal arc welding. The samples were analyzed using an experimental method to separate different Mn fractions based on selective chemical solubility. The full-shift total particle size Mn time-weighted average (TWA) breathing zone concentrations ranged 0.38-26 for soluble Mn in a mild ammonium acetate solution; 3.2-170 for Mn0,2+ in acetic acid; 3.1-290 for Mn3+,4+ in hydroxylamine-hydrochloride; and non-detectable (ND)-130 µg m-3 for insoluble Mn fractions in hydrochloric and nitric acid. The summation of all the total particulate Mn TWA fractions yielded results that ranged from 6.9 to 610 µg m-3. The range of respirable size Mn TWA concentrations were 0.33-21 for soluble Mn; 15-140 for Mn0,2+; 14-170 for Mn3+,4+; 5.3-230 for insoluble Mn; and 36-530 µg m-3 for Mn (sum of fractions). Total particulate TWA GM concentrations of the Mn (sum) were 53 (GSD = 2.5), 150 (GSD = 1.7), and 120 (GSD = 1.8) µg m-3 for the three separate factories. Although all of the workers' exposures were measured below the OSHA regulatory permissible exposure limit and NIOSH recommended exposure limit for Mn, 70 welders' exposures exceeded the ACGIH Threshold Limit Values® for total Mn (100 µg m-3) and 29 exceeded the recently adopted respirable Mn TLV (20 µg m-3). This study shows that a welding fume exposure control and management program is warranted for Mn, which includes improved exhaust ventilation and may necessitate the use of respiratory protection, especially for welding parts that impede air circulation. Published by Oxford University Press on behalf of

  3. Video-Based Learning vs Traditional Lecture for Instructing Emergency Medicine Residents in Disaster Medicine Principles of Mass Triage, Decontamination, and Personal Protective Equipment.

    Science.gov (United States)

    Curtis, Henry A; Trang, Karen; Chason, Kevin W; Biddinger, Paul D

    2018-01-10

    Introduction Great demands have been placed on disaster medicine educators. There is a need to develop innovative methods to educate Emergency Physicians in the ever-expanding body of disaster medicine knowledge. The authors sought to demonstrate that video-based learning (VBL) could be a promising alternative to traditional learning methods for teaching disaster medicine core competencies. Hypothesis/Problem The objective was to compare VBL to traditional lecture (TL) for instructing Emergency Medicine residents in the American College of Emergency Physicians (ACEP; Irving, Texas USA) disaster medicine core competencies of patient triage and decontamination. A randomized, controlled pilot study compared two methods of instruction for mass triage, decontamination, and personal protective equipment (PPE). Emergency Medicine resident learning was measured with a knowledge quiz, a Likert scale measuring comfort, and a practical exercise. An independent samples t-test compared the scoring of the VBL with the TL group. Twenty-six residents were randomized to VBL (n=13) or TL (n=13). Knowledge score improvement following video (14.9%) versus lecture (14.1%) did not differ significantly between the groups (P=.74). Comfort score improvement also did not differ (P=.64) between video (18.3%) and lecture groups (15.8%). In the practical skills assessment, the VBL group outperformed the TL group overall (70.4% vs 55.5%; PMedicine residents in the ACEP disaster medicine core competencies of patient triage and decontamination. Curtis HA , Trang K , Chason KW , Biddinger PD . Video-based learning vs traditional lecture for instructing emergency medicine residents in disaster medicine principles of mass triage, decontamination, and personal protective equipment.

  4. A validated HPLC method for determining residues of a dual active ingredient anti-malarial drug on manufacturing equipment surfaces.

    Science.gov (United States)

    Boca, Madalina Brindusa; Apostolides, Zeno; Pretorius, Etheresia

    2005-03-09

    Analytical method validation, determining the recovery rate from the equipment surface and the stability of a potential contaminant are important steps of a cleaning validation process. A rapid, sensitive and reproducible reversed-phase high-performance liquid chromatographic method was developed for the determination of pyrimethamine (PYR) and sulfadoxine (SUL) in cleaning validation swab samples. The active compounds can be selectively quantified in a sample matrix containing detergent and swab material as low as 0.12 microg/ml. The swabbing procedure used on stainless steel coupons was validated and the stability of PYR and SUL in the swab samples was assessed. The calculated limit of contamination values for PYR (4.99 microg/cm2) and SUL (19.14 microg/cm2) were not exceeded during four consecutive equipment cleaning trials. This confirms that the desired level of cleanliness is achieved with the current cleaning procedures, which are consequently validated.

  5. Characteristic features of determining the labor input and estimated cost of the development and manufacture of equipment

    Science.gov (United States)

    Kurmanaliyev, T. I.; Breslavets, A. V.

    1974-01-01

    The difficulties in obtaining exact calculation data for the labor input and estimated cost are noted. The method of calculating the labor cost of the design work using the provisional normative indexes with respect to individual forms of operations is proposed. Values of certain coefficients recommended for use in the practical calculations of the labor input for the development of new scientific equipment for space research are presented.

  6. Cleaning verification: A five parameter study of a Total Organic Carbon method development and validation for the cleaning assessment of residual detergents in manufacturing equipment.

    Science.gov (United States)

    Li, Xue; Ahmad, Imad A Haidar; Tam, James; Wang, Yan; Dao, Gina; Blasko, Andrei

    2018-02-05

    A Total Organic Carbon (TOC) based analytical method to quantitate trace residues of clean-in-place (CIP) detergents CIP100® and CIP200® on the surfaces of pharmaceutical manufacturing equipment was developed and validated. Five factors affecting the development and validation of the method were identified: diluent composition, diluent volume, extraction method, location for TOC sample preparation, and oxidant flow rate. Key experimental parameters were optimized to minimize contamination and to improve the sensitivity, recovery, and reliability of the method. The optimized concentration of the phosphoric acid in the swabbing solution was 0.05M, and the optimal volume of the sample solution was 30mL. The swab extraction method was 1min sonication. The use of a clean room, as compared to an isolated lab environment, was not required for method validation. The method was demonstrated to be linear with a correlation coefficient (R) of 0.9999. The average recoveries from stainless steel surfaces at multiple spike levels were >90%. The repeatability and intermediate precision results were ≤5% across the 2.2-6.6ppm range (50-150% of the target maximum carry over, MACO, limit). The method was also shown to be sensitive with a detection limit (DL) of 38ppb and a quantitation limit (QL) of 114ppb. The method validation demonstrated that the developed method is suitable for its intended use. The methodology developed in this study is generally applicable to the cleaning verification of any organic detergents used for the cleaning of pharmaceutical manufacturing equipment made of electropolished stainless steel material. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Solar Equipment

    Science.gov (United States)

    1983-01-01

    A medical refrigeration and a water pump both powered by solar cells that convert sunlight directly into electricity are among the line of solar powered equipment manufactured by IUS (Independent Utility Systems) for use in areas where conventional power is not available. IUS benefited from NASA technology incorporated in the solar panel design and from assistance provided by Kerr Industrial Applications Center.

  8. The Study on Neuro-IE Management Software in Manufacturing Enterprises. -The Application of Video Analysis Technology

    Science.gov (United States)

    Bian, Jun; Fu, Huijian; Shang, Qian; Zhou, Xiangyang; Ma, Qingguo

    This paper analyzes the outstanding problems in current industrial production by reviewing the three stages of the Industrial Engineering Development. Based on investigations and interviews in enterprises, we propose the new idea of applying "computer video analysis technology" to new industrial engineering management software, and add "loose-coefficient" of the working station to this software in order to arrange scientific and humanistic production. Meanwhile, we suggest utilizing Biofeedback Technology to promote further research on "the rules of workers' physiological, psychological and emotional changes in production". This new kind of combination will push forward industrial engineering theories and benefit enterprises in progressing towards flexible social production, thus it will be of great theory innovation value, social significance and application value.

  9. About Personal Protective Equipment (PPE)

    Science.gov (United States)

    ... Equipment for Infection Control Questions About Personal Protective Equipment (PPE) Share Tweet Linkedin Pin it More sharing ... Print Q1. How do manufacturers ensure personal protective equipment (PPE) is safe and effective? A1. To help ...

  10. Reviews Book: The Babylonian Theorem Video Game: BrainBox360 (Physics Edition) Book: Teaching and Learning Science: Towards a Personalized Approach Book: Good Practice in Science Teaching: What Research Has to Say Equipment: PAPERSHOW Equipment: SEP Steady State Bottle Kit Equipment: Sciencescope Datalogging Balance Equipment: USB Robot Arm Equipment: Sciencescope Spectrophotometer Web Watch

    Science.gov (United States)

    2010-07-01

    WE RECOMMEND Good Practice in Science Teaching: What Research Has to Say Book explores and summarizes the research Steady State Bottle Kit Another gem from SEP Sciencescope Datalogging Balance Balance suits everyday use Sciencescope Spectrophotometer Device displays clear spectrum WORTH A LOOK The Babylonian Theorem Text explains ancient Egyptian mathematics BrainBox360 (Physics Edition) Video game tests your knowledge Teaching and Learning Science: Towards a Personalized Approach Book reveals how useful physics teachers really are PAPERSHOW Gadget kit is useful but has limitations Robotic Arm Kit with USB PC Interface Robot arm teaches programming WEB WATCH Simple applets teach complex topics

  11. Manufacturing a Superconductor in School.

    Science.gov (United States)

    Barrow, John

    1989-01-01

    Described is the manufacture of a superconductor from a commercially available kit using equipment usually available in schools or easily obtainable. The construction is described in detail including equipment, materials, safety procedures, tolerances, and manufacture. (Author/CW)

  12. A hybrid approach based on ANP, ELECTRE and SIMANP metaheuristic method for outsourcing manufacturing procedures according to supply chain risks - Case study: A medical equipment manufacturer company in Iran

    Directory of Open Access Journals (Sweden)

    Hiwa Farughi

    2017-01-01

    Full Text Available Nowadays enterprises should consider seeking to reduce the supply chain risks as a crucial part of their activities in order to improve their competitiveness in the international context. Choosing the suitable strategy in connection with assigning some parts of the production process to outside the organization is a complex multi-criteria decision making problem and it gets more complicated when supply chain risk factors as the factors to select the strategy as well as dependence and the close ties between these criteria also be considered. In this paper, after the identification of risks in the supply chain of a medical equipment manufacturer company, dependence and ties between criteria in line with choosing the best strategy among existing alternatives has been examined in the form of a combined ANP-ELECTRE method. This combined model is of high performance to give a solution to the problem considered in this paper. But given the complex and time consuming nature of the AHP and ELECTRE, in this study a meta-heuristic algorithm is developed called SIMANP that despite the simplicity of computing and high-speed, is good in the terms of precision and efficiency. The results of comparing SIMANP algorithm and the proposed ANP - ELECTRE method are presented at the end.

  13. A modelling approach for improved implementation of information technology in manufacturing systems

    DEFF Research Database (Denmark)

    Larsen, Michael Holm; Langer, Gilad; Kirkby, Lars Phillip

    2000-01-01

    concept into practice. The paper demonstrates the use of the approach in a practical case, which involves modelling of the shop floor activities and control system at the aluminium parts production at a Danish manufacturer of state-of-the-art audio-video equipment and telephones....

  14. Wire + Arc Additive Manufacturing

    OpenAIRE

    Williams, Stewart W.; Martina, Filomeno; Addison, Adrian C.; Ding, Jialuo; Pardal, Goncalo; Colegrove, Paul A.

    2016-01-01

    Depositing large components (>10 kg) in titanium, aluminium, steel and other metals is possible using Wire + Arc Additive Manufacturing. This technology adopts arc welding tools and wire as feedstock for additive manufacturing purposes. High deposition rates, low material and equipment costs, and good structural integrity make Wire+Arc Additive Manufacturing a suitable candidate for replacing the current method of manufacturing from solid billets or large forgings, especially with regards to ...

  15. 2010 Manufacturing Readiness Assessment Update to the 2008 Report for Fuel Cell Stacks and Systems for the Backup Power and Materials Handling Equipment Markets

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler, D.; Ulsh, M.

    2012-08-01

    In 2008, the National Renewable Energy Laboratory (NREL), under contract to the US Department of Energy (DOE), conducted a manufacturing readiness assessment (MRA) of fuel cell systems and fuel cell stacks for back-up power and material handling applications (MHE). To facilitate the MRA, manufacturing readiness levels (MRL) were defined that were based on the Technology Readiness Levels previously established by the US Department of Energy (DOE). NREL assessed the extensive existing hierarchy of MRLs developed by Department of Defense (DoD) and other Federal entities, and developed a MRL scale adapted to the needs of the Fuel Cell Technologies Program (FCTP) and to the status of the fuel cell industry. The MRL ranking of a fuel cell manufacturing facility increases as the manufacturing capability transitions from laboratory prototype development through Low Rate Initial Production to Full Rate Production. DOE can use MRLs to address the economic and institutional risks associated with a ramp-up in polymer electrolyte membrane (PEM) fuel cell production. In 2010, NREL updated this assessment, including additional manufacturers, an assessment of market developments since the original report, and a comparison of MRLs between 2008 and 2010.

  16. Transmission of compressed video

    Science.gov (United States)

    Pasch, H. L.

    1990-09-01

    An overview of video coding is presented. The aim is not to give a technical summary of possible coding techniques, but to address subjects related to video compression in general and to the transmission of compressed video in more detail. Bit rate reduction is in general possible by removing redundant information; removing information the eye does not use anyway; and reducing the quality of the video. The codecs which are used for reducing the bit rate, can be divided into two groups: Constant Bit rate Codecs (CBC's), which keep the bit rate constant, but vary the video quality; and Variable Bit rate Codecs (VBC's), which keep the video quality constant by varying the bit rate. VBC's can be in general reach a higher video quality than CBC's using less bandwidth, but need a transmission system that allows the bandwidth of a connection to fluctuate in time. The current and the next generation of the PSTN does not allow this; ATM might. There are several factors which influence the quality of video: the bit error rate of the transmission channel, slip rate, packet loss rate/packet insertion rate, end-to-end delay, phase shift between voice and video, and bit rate. Based on the bit rate of the coded video, the following classification of coded video can be made: High Definition Television (HDTV); Broadcast Quality Television (BQTV); video conferencing; and video telephony. The properties of these classes are given. The video conferencing and video telephony equipment available now and in the next few years can be divided into three categories: conforming to 1984 CCITT standard for video conferencing; conforming to 1988 CCITT standard; and conforming to no standard.

  17. System of video observation for electron beam welding process

    Science.gov (United States)

    Laptenok, V. D.; Seregin, Y. N.; Bocharov, A. N.; Murygin, A. V.; Tynchenko, V. S.

    2016-04-01

    Equipment of video observation system for electron beam welding process was developed. Construction of video observation system allows to reduce negative effects on video camera during the process of electron beam welding and get qualitative images of this process.

  18. 21 CFR 225.30 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment. 225.30 Section 225.30 Food and Drugs... Equipment § 225.30 Equipment. (a) Equipment which is designed to perform its intended function and is properly installed and used is essential to the manufacture of medicated feeds. Such equipment permits...

  19. 21 CFR 226.30 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment. 226.30 Section 226.30 Food and Drugs... Facilities and Equipment § 226.30 Equipment. Equipment used for the manufacture, processing, packaging, bulk... facilitate maintenance and operation for its intended purpose. The equipment shall: (a) Be so constructed...

  20. Apparel Manufacture

    Science.gov (United States)

    1995-01-01

    Marshall Space Flight Center teamed with the University of Alabama in Huntsville (UAH) in 1989 on a program involving development of advanced simulation software. Concurrently, the State of Alabama chartered UAH to conduct a technology advancement program in support of the state's apparel manufacturers. In 1992, under contract to Marshall, UAH developed an apparel-specific software package that allows manufacturers to design and analyze modules without making an actual investment -- it functions on ordinary PC equipment. By 1995, Marshall had responded to requests for the package from more than 400 companies in 36 states; some of which reported savings up to $2 million. The National Garment Company of Missouri, for example, uses the system to design and balance a modular line before committing to expensive hardware; for setting up sewing lines; and for determining the composition of a new team.

  1. The Manufacturing Industry

    Science.gov (United States)

    2005-06-01

    their currencies to the dollar at an artificially weak exchange rate in order to ensure continued access to the US market on favorable terms. China is...creates US jobs in the manufacturing sector, spurring investments in people and equipment, which contributes to the strength of the economy.73 US...movements are: (1) Kaizen , (2) Synchronous Manufacturing, and (3) Just-In-Time (JIT) Manufacturing. Kaizen : Kaizen is a Japanese word that means

  2. ENERGY STAR Certified Audio Video

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 3.0 ENERGY STAR Program Requirements for Audio Video Equipment that are effective as of...

  3. Stockyard equipment buoyed by commodity prices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-03-15

    Recent contract signings by heavy plant manufacturers show that the market for stockyard equipment is holding its own, despite continued economic uncertainty worldwide. Development by major manufacturers of stacker/reclaimers and bucket wheel excavators are reported. 1 photo.

  4. 21 CFR 225.130 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment. 225.130 Section 225.130 Food and Drugs... CURRENT GOOD MANUFACTURING PRACTICE FOR MEDICATED FEEDS Facilities and Equipment § 225.130 Equipment. Equipment shall be capable of producing a medicated feed of intended potency and purity, and shall be...

  5. Manufacturing information system

    Science.gov (United States)

    Allen, D. K.; Smith, P. R.; Smart, M. J.

    1983-12-01

    The size and cost of manufacturing equipment has made it extremely difficult to perform realistic modeling and simulation of the manufacturing process in university research laboratories. Likewise the size and cost factors, coupled with many uncontrolled variables of the production situation has even made it difficult to perform adequate manufacturing research in the industrial setting. Only the largest companies can afford manufacturing research laboratories; research results are often held proprietary and seldom find their way into the university classroom to aid in education and training of new manufacturing engineers. It is the purpose for this research to continue the development of miniature prototype equipment suitable for use in an integrated CAD/CAM Laboratory. The equipment being developed is capable of actually performing production operations (e.g. drilling, milling, turning, punching, etc.) on metallic and non-metallic workpieces. The integrated CAD/CAM Mini-Lab is integrating high resolution, computer graphics, parametric design, parametric N/C parts programmings, CNC machine control, automated storage and retrieval, with robotics materials handling. The availability of miniature CAD/CAM laboratory equipment will provide the basis for intensive laboratory research on manufacturing information systems.

  6. Video microblogging

    DEFF Research Database (Denmark)

    Bornoe, Nis; Barkhuus, Louise

    2010-01-01

    Microblogging is a recently popular phenomenon and with the increasing trend for video cameras to be built into mobile phones, a new type of microblogging has entered the arena of electronic communication: video microblogging. In this study we examine video microblogging, which is the broadcasting...... of short videos. A series of semi-structured interviews offers an understanding of why and how video microblogging is used and what the users post and broadcast....

  7. Video demystified

    CERN Document Server

    Jack, Keith

    2004-01-01

    This international bestseller and essential reference is the "bible" for digital video engineers and programmers worldwide. This is by far the most informative analog and digital video reference available, includes the hottest new trends and cutting-edge developments in the field. Video Demystified, Fourth Edition is a "one stop" reference guide for the various digital video technologies. The fourth edition is completely updated with all new chapters on MPEG-4, H.264, SDTV/HDTV, ATSC/DVB, and Streaming Video (Video over DSL, Ethernet, etc.), as well as discussions of the latest standards throughout. The accompanying CD-ROM is updated to include a unique set of video test files in the newest formats. *This essential reference is the "bible" for digital video engineers and programmers worldwide *Contains all new chapters on MPEG-4, H.264, SDTV/HDTV, ATSC/DVB, and Streaming Video *Completely revised with all the latest and most up-to-date industry standards.

  8. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  9. Reliability of Manufacturing Equipment in Complex Environments

    Science.gov (United States)

    2011-01-01

    Science Foundation ( CMMI -0856702) and the U.S. Air Force Office of Scientific Research (FQ8671-04-0-0359). 23 References [1] Abate, J. and Whitt, W... thesis , University of Cambridge. 25 [32] Moorthy, M.V. (1995), Numerical inversion of two-dimensional Laplace transforms-Fourier series representation

  10. Digital video.

    Science.gov (United States)

    Johnson, Don; Johnson, Mike

    2004-04-01

    The process of digital capture, editing, and archiving video has become an important aspect of documenting arthroscopic surgery. Recording the arthroscopic findings before and after surgery is an essential part of the patient's medical record. The hardware and software has become more reasonable to purchase, but the learning curve to master the software is steep. Digital video is captured at the time of arthroscopy to a hard disk, and written to a CD at the end of the operative procedure. The process of obtaining video of open procedures is more complex. Outside video of the procedure is recorded on digital tape with a digital video camera. The camera must be plugged into a computer to capture the video on the hard disk. Adobe Premiere software is used to edit the video and render the finished video to the hard drive. This finished video is burned onto a CD. We outline the choice of computer hardware and software for the manipulation of digital video. The techniques of backup and archiving the completed projects and files also are outlined. The uses of digital video for education and the formats that can be used in PowerPoint presentations are discussed.

  11. Reviews Book: The Age of Wonder Equipment: Portoscope DVD: Around the World in 80 Images Book: Four Laws that Drive the Universe Book: Antimatter Equipment: Coffee Saver Starter Set Equipment: Graphite Levitation Kit Book: Critical Reading Video: Science Fiction-Science Fact Web Watch

    Science.gov (United States)

    2009-03-01

    WE RECOMMEND The Age of Wonder This book tells the stories of inspiring 19th-century scientists Antimatter A fast read that gives an intriguing tour of the antimatter world Science Fiction-Science Fact A video from a set of resources about the facts in science fiction WORTH A LOOK Portoscope Lightweight ×30 microscope that is easy on the purse Four Laws that Drive the Universe In just 124 pages Peter Atkins explains thermodynamics Coffee Saver Starter Kit A tool that can demonstrate the effect of reduced air pressure Graphite Levitation Kit Compact set that demonstrates diamagnetic behaviour Critical Reading A study guide on how to read scientific papers HANDLE WITH CARE Around the World in 80 Images Navigate through images from Envistat, country by country WEB WATCH This month's issue features real-time simulation program Krucible 2.0, which enables learners to run virtual experiments

  12. Solar array manufacturing industry simulation

    Science.gov (United States)

    Chamberlain, R. G.; Firnett, P. J.; Kleine, B.

    1980-01-01

    Solar Array Manufacturing Industry Simulation (SAMIS) program is a standardized model of industry to manufacture silicon solar modules for use in electricity generation. Model is used to develop financial reports that detail requirements, including amounts and prices for materials, labor, facilities, and equipment required by companies.

  13. Immersive video

    Science.gov (United States)

    Moezzi, Saied; Katkere, Arun L.; Jain, Ramesh C.

    1996-03-01

    Interactive video and television viewers should have the power to control their viewing position. To make this a reality, we introduce the concept of Immersive Video, which employs computer vision and computer graphics technologies to provide remote users a sense of complete immersion when viewing an event. Immersive Video uses multiple videos of an event, captured from different perspectives, to generate a full 3D digital video of that event. That is accomplished by assimilating important information from each video stream into a comprehensive, dynamic, 3D model of the environment. Using this 3D digital video, interactive viewers can then move around the remote environment and observe the events taking place from any desired perspective. Our Immersive Video System currently provides interactive viewing and `walkthrus' of staged karate demonstrations, basketball games, dance performances, and typical campus scenes. In its full realization, Immersive Video will be a paradigm shift in visual communication which will revolutionize television and video media, and become an integral part of future telepresence and virtual reality systems.

  14. Video games

    OpenAIRE

    Kolář, Vojtěch

    2012-01-01

    This thesis is based on a detailed analysis of various topics related to the question of whether video games can be art. In the first place it analyzes the current academic discussion on this subject and confronts different opinions of both supporters and objectors of the idea, that video games can be a full-fledged art form. The second point of this paper is to analyze the properties, that are inherent to video games, in order to find the reason, why cultural elite considers video games as i...

  15. Equipment repaired is equipment gained

    Directory of Open Access Journals (Sweden)

    V Srinivasan

    2009-06-01

    Full Text Available According to WHO, at any one time, around 50 per cent of medical equipment in low- and middle-income countries cannot be used because of lack of maintenance or spare parts. We have found that unwillingness or inability to repair equipment and put it back in use is also a major cause.

  16. Integrated Glass Coating Manufacturing Line

    Energy Technology Data Exchange (ETDEWEB)

    Brophy, Brenor [Enki Technology Inc., San Jose, CA (United States)

    2015-09-30

    This project aims to enable US module manufacturers to coat glass with Enki’s state of the art tunable functionalized AR coatings at the lowest possible cost and highest possible performance by encapsulating Enki’s coating process in an integrated tool that facilitates effective process improvement through metrology and data analysis for greater quality and performance while reducing footprint, operating and capital costs. The Phase 1 objective was a fully designed manufacturing line, including fully specified equipment ready for issue of purchase requisitions; a detailed economic justification based on market prices at the end of Phase 1 and projected manufacturing costs and a detailed deployment plan for the equipment.

  17. Teaching Writing in a Video Studio.

    Science.gov (United States)

    Webb, Agnes J.

    1984-01-01

    An experienced educator describes how a video studio was turned into an effective college writing classroom. Necessary equipment, the nine-step process students utilized to produce a short television documentary, and course outcome are discussed in detail. (MBR)

  18. Manufacturing Interfaces

    NARCIS (Netherlands)

    van Houten, Frederikus J.A.M.

    1992-01-01

    The paper identifies the changing needs and requirements with respect to the interfacing of manufacturing functions. It considers the manufacturing system, its components and their relationships from the technological and logistic point of view, against the background of concurrent engineering.

  19. Detectors for scanning video imagers

    Science.gov (United States)

    Webb, Robert H.; Hughes, George W.

    1993-11-01

    In scanning video imagers, a single detector sees each pixel for only 100 ns, so the bandwidth of the detector needs to be about 10 MHz. How this fact influences the choice of detectors for scanning systems is described here. Some important parametric quantities obtained from manufacturer specifications are related and it is shown how to compare detectors when specified quantities differ.

  20. Video Field Studies with your Cell Phone

    DEFF Research Database (Denmark)

    Buur, Jacob; Fraser, Euan

    2010-01-01

    is monumental, that equipment is difficult to handle etc. This tutorial presents a lightweight entry into video field studies, using cheap devices like cell phones and portable webcams for informal shooting and simple computer handling for editing. E.g. how far can you get with an iPhone or a video capable i...

  1. Precision manufacturing

    CERN Document Server

    Dornfeld, David

    2008-01-01

    Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

  2. Video Podcasts

    DEFF Research Database (Denmark)

    Nortvig, Anne Mette; Sørensen, Birgitte Holm

    2016-01-01

    This project’s aim was to support and facilitate master’s students’ preparation and collaboration by making video podcasts of short lectures available on YouTube prior to students’ first face-to-face seminar. The empirical material stems from group interviews, from statistical data created through...... YouTube analytics and from surveys answered by students after the seminar. The project sought to explore how video podcasts support learning and reflection online and how students use and reflect on the integration of online activities in the videos. Findings showed that students engaged actively...

  3. Creating and Editing Video to Accompany Manuscripts.

    Science.gov (United States)

    Gordon, Shayna L; Porto, Dennis A; Ozog, David M; Council, M Laurin

    2016-02-01

    The use of video can enhance the learning experience by demonstrating procedural techniques that are difficult to relay in writing. Several peer-reviewed journals allow publication of videos alongside articles to complement the written text. The purpose of this article is to instruct the dermatologic surgeon on how to create and edit a video using a smartphone, to accompany a article. The authors describe simple tips to optimize surgical videography. The video that accompanies this article further demonstrates the techniques described. Creating a surgical video requires little experience or equipment and can be completed in a modest amount of time. Making and editing a video to accompany a article can be accomplished by following the simple recommendations in this article. In addition, the increased use of video in dermatologic surgery education can enhance the learning opportunity.

  4. Aplicação da manufatura enxuta em uma indústria de equipamentos agrícolas Application of lean manufacturing in an industry of agricultural equipments

    Directory of Open Access Journals (Sweden)

    Ana Paula Barth Bartz

    2013-04-01

    , increasing their efficiency. The objective of this study was to decrease the lead-time required by the studied company, by practical application of just-in-time searching for lean production in a metalworking company, manufacturer of agricultural implements. To meet this purpose, a case study of qualitative and descriptive order was carried out. To collect data, observation and documental analysis were performed, in order to understand the production processes, then working with the collection of data, through structured interviews in order to identify the difficulties encountered by suppliers in providing the supplies within the agreed specifications. The company had high indexes of late delivery of their products because of the high lead-time. Through the development of the mapping of actual flow, it was found that the organization was working with a production pushed and much of the late occurred because of problems in the supply of inputs. By eliminating tasks that did not add value to the final product, a lean value flow was produced for the process, identifying the major problems which caused the suppliers to provide the supplies out of specification or out of date and suggested actions that could be implemented for the elimination of these delays. Through these actions, the reduction in lead time was observed, helping to better meet delivery deadlines, increased competitiveness, a relevant fact to keep in today's market of agricultural equipment.

  5. Intellectual Video Filming

    DEFF Research Database (Denmark)

    Juel, Henrik

    Like everyone else university students of the humanities are quite used to watching Hollywood productions and professional TV. It requires some didactic effort to redirect their eyes and ears away from the conventional mainstream style and on to new and challenging ways of using the film media...... in favour of worthy causes. However, it is also very rewarding to draw on the creativity, enthusiasm and rapidly improving technical skills of young students, and to guide them to use video equipment themselves for documentary, for philosophical film essays and intellectual debate. In the digital era...

  6. video115_0403 -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  7. video114_0402c -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vesselTatoosh during August 2005. Video data from...

  8. video114_0402b -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  9. Radio monitoring problems, methods, and equipment

    CERN Document Server

    Rembovsky, Anatoly; Kozmin, Vladimir; Smolskiy, Sergey

    2009-01-01

    Offers a unified approach to fundamental aspects of Automated Radio Monitoring (ARM). This book discusses the development, modeling, design, and manufacture of ARM systems. It provides classification and descriptions of modern high-efficient hardware-software ARM equipment, including the equipment for detection and radio direction-finding.

  10. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  11. A prototype to automate the video subsystem routing for the video distribution subsystem of Space Station Freedom

    Science.gov (United States)

    Betz, Jessie M. Bethly

    1993-12-01

    The Video Distribution Subsystem (VDS) for Space Station Freedom provides onboard video communications. The VDS includes three major functions: external video switching; internal video switching; and sync and control generation. The Video Subsystem Routing (VSR) is a part of the VDS Manager Computer Software Configuration Item (VSM/CSCI). The VSM/CSCI is the software which controls and monitors the VDS equipment. VSR activates, terminates, and modifies video services in response to Tier-1 commands to connect video sources to video destinations. VSR selects connection paths based on availability of resources and updates the video routing lookup tables. This project involves investigating the current methodology to automate the Video Subsystem Routing and developing and testing a prototype as 'proof of concept' for designers.

  12. ICAM (Integrated Computer-Aided Manufacturing) Manufacturing Cost/Design Guide. Volume 7. Technology Transfer Summary.

    Science.gov (United States)

    1984-09-01

    TechMod Pro- gram, Tech Area 3, "Computer-Aided Value Engineering". Colt Industries * Assist in automating production lines . Computer Avionics e Optimize...design and manufacture of power system equipment, power supplies, radar modulations, radar equipment, and test equipment. Emhart Machinery Assist in...manufacturability impacts to mechanical designers. ITT Defense Comunications e Analyze design to unit productionK costs; provide guidelines for program

  13. Akademisk video

    DEFF Research Database (Denmark)

    Frølunde, Lisbeth

    2017-01-01

    Dette kapitel har fokus på metodiske problemstillinger, der opstår i forhold til at bruge (digital) video i forbindelse med forskningskommunikation, ikke mindst online. Video har længe været benyttet i forskningen til dataindsamling og forskningskommunikation. Med digitaliseringen og internettet er...... der dog opstået nye muligheder og udfordringer i forhold til at formidle og distribuere forskningsresultater til forskellige målgrupper via video. Samtidig er klassiske metodologiske problematikker som forskerens positionering i forhold til det undersøgte stadig aktuelle. Både klassiske og nye...... problemstillinger diskuteres i kapitlet, som rammesætter diskussionen ud fra forskellige positioneringsmuligheder: formidler, historiefortæller, eller dialogist. Disse positioner relaterer sig til genrer inden for ’akademisk video’. Afslutningsvis præsenteres en metodisk værktøjskasse med redskaber til planlægning...

  14. A quick guide to video-tracking birds

    OpenAIRE

    Bluff, Lucas A; Rutz, Christian

    2008-01-01

    Video tracking is a powerful new tool for studying natural undisturbed behaviour in a wide range of birds, mammals and reptiles. Using integrated animal-borne video tags, video footage and positional data are recorded simultaneously from wild free-ranging animals. At the analysis stage, video scenes are linked to radio fixes, yielding an animal's eye view of resource use and social interactions along a known movement trajectory. Here, we provide a brief description of our basic equipment and ...

  15. Mengolah Data Video Analog menjadi Video Digital Sederhana

    Directory of Open Access Journals (Sweden)

    Nick Soedarso

    2010-10-01

    Full Text Available Nowadays, editing technology has entered the digital age. Technology will demonstrate the evidence of processing analog to digital data has become simpler since editing technology has been integrated in the society in all aspects. Understanding the technique of processing analog to digital data is important in producing a video. To utilize this technology, the introduction of equipments is fundamental to understand the features. The next phase is the capturing process that supports the preparation in editing process from scene to scene; therefore, it will become a watchable video.   

  16. Video Analytics

    DEFF Research Database (Denmark)

    This book collects the papers presented at two workshops during the 23rd International Conference on Pattern Recognition (ICPR): the Third Workshop on Video Analytics for Audience Measurement (VAAM) and the Second International Workshop on Face and Facial Expression Recognition (FFER) from Real...... World Videos. The workshops were run on December 4, 2016, in Cancun in Mexico. The two workshops together received 13 papers. Each paper was then reviewed by at least two expert reviewers in the field. In all, 11 papers were accepted to be presented at the workshops. The topics covered in the papers...

  17. Equipment Obsolescence Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.

    2014-07-01

    Nuclear Power Plant (NPP) Operators are challenged with securing reliable supply channels for safety related equipment due to equipment obsolescence. Many Original Equipment Manufacturers (OEMs) have terminated production of spare parts and product life-cycle support. The average component life cycles are much shorter than the NPP design life, which means that replacement components and parts for the original NPP systems are not available for the complete design life of the NPPs. The lack or scarcity of replacement parts adversely affects plant reliability and ultimately the profitability of the affected NPPs. This problem is further compounded when NPPs pursue license renewal and approval for plant-life extension. A reliable and predictable supply of replacement co components is necessary for NPPs to remain economically competitive and meet regulatory requirements and guidelines. Electrical and I and C components, in particular, have short product life cycles and obsolescence issues must be managed pro actively and not reactively in order to mitigate the risk to the NPP to ensure reliable and economic NPP operation. (Author)

  18. Equipping the stockyard

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-04-01

    Good stockyard management has become an important feature in the coal supply chain. Today, virtually all suppliers and consumers make use of at least one stockyard when moving coal. The type of handling equipment that is best for a particular situation is consequently of wide interest. The value of coal stored in stockpiles can form a significant part of the end user's costs, as pointed out in a recent IEA Coal Research report 'Management of coal stockpiles'. Better blending is becoming a key factor in optimising both power plant and blast furnace performance. It is important to match the materials handling equipment to a facility's needs. Good stockpile management involves processing coal quality within the pile and controlling dust. Decisions must be made on appropriate methods of stacking coal, in longitudinal or circular bed. The article goes on to describe recent contracts for stockyard equipment by such manufacturers as UK-based Strachan and Henshaw and Spain's TAIM TFG. 3 photos.

  19. Robotic video photogrammetry system

    Science.gov (United States)

    Gustafson, Peter C.

    1997-07-01

    For many years, photogrammetry has been in use at TRW. During that time, needs have arisen for highly repetitive measurements. In an effort to satisfy these needs in a timely manner, a specialized Robotic Video Photogrammetry System (RVPS) was developed by TRW in conjunction with outside vendors. The primary application for the RVPS has strict accuracy requirements that demand significantly more images than the previously used film-based system. The time involved in taking these images was prohibitive but by automating the data acquisition process, video techniques became a practical alternative to the more traditional film- based approach. In fact, by applying video techniques, measurement productivity was enhanced significantly. Analysis involved was also brought `on-board' to the RVPS, allowing shop floor acquisition and delivery of results. The RVPS has also been applied in other tasks and was found to make a critical improvement in productivity, allowing many more tests to be run in a shorter time cycle. This paper will discuss the creation of the system and TRW's experiences with the RVPS. Highlighted will be the lessons learned during these efforts and significant attributes of the process not common to the standard application of photogrammetry for industrial measurement. As productivity and ease of use continue to drive the application of photogrammetry in today's manufacturing climate, TRW expects several systems, with technological improvements applied, to be in use in the near future.

  20. Ethernet direct display: a new dimension for in-vehicle video connectivity solutions

    Science.gov (United States)

    Rowley, Vincent

    2009-05-01

    To improve the local situational awareness (LSA) of personnel in light or heavily armored vehicles, most military organizations recognize the need to equip their fleets with high-resolution digital video systems. Several related upgrade programs are already in progress and, almost invariably, COTS IP/Ethernet is specified as the underlying transport mechanism. The high bandwidths, long reach, networking flexibility, scalability, and affordability of IP/Ethernet make it an attractive choice. There are significant technical challenges, however, in achieving high-performance, real-time video connectivity over the IP/Ethernet platform. As an early pioneer in performance-oriented video systems based on IP/Ethernet, Pleora Technologies has developed core expertise in meeting these challenges and applied a singular focus to innovating within the required framework. The company's field-proven iPORTTM Video Connectivity Solution is deployed successfully in thousands of real-world applications for medical, military, and manufacturing operations. Pleora's latest innovation is eDisplayTM, a smallfootprint, low-power, highly efficient IP engine that acquires video from an Ethernet connection and sends it directly to a standard HDMI/DVI monitor for real-time viewing. More costly PCs are not required. This paper describes Pleora's eDisplay IP Engine in more detail. It demonstrates how - in concert with other elements of the end-to-end iPORT Video Connectivity Solution - the engine can be used to build standards-based, in-vehicle video systems that increase the safety and effectiveness of military personnel while fully leveraging the advantages of the lowcost COTS IP/Ethernet platform.

  1. Multimedia in the Counselor Education Classroom: Transforming Learning with Video Technology.

    Science.gov (United States)

    Baltimore, Michael L.

    This document addresses video production as it relates to counselor education. Groundwork for infusing video production technology is covered, including the video production process, equipment, computer technology that assists in production, video editing, and final production. In addition, three important formats will be discussed. First is the…

  2. Video Analytics

    DEFF Research Database (Denmark)

    This book collects the papers presented at two workshops during the 23rd International Conference on Pattern Recognition (ICPR): the Third Workshop on Video Analytics for Audience Measurement (VAAM) and the Second International Workshop on Face and Facial Expression Recognition (FFER) from Real W...

  3. Equipments - products: PAM, Europe, Atex; Sudco:an innovative manufacturer; A Silva Matos and the environment; Worthington Cylinders: expanding our activities; Lagoplast: indicator plates and cap seals; Sterling pumps; Rego GmbH Distribution Centre; Equipements - produits: PAM, Europe, Atex; Sudco: un fabricant innovant; A. Silva Matos et l'environnement; Worthington Cylinders: etendre notre activite; Lagoplast: plaques indicatrices et capsules; Sterling Fluid Systems; le centre de distribution de Rego GmbH

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2004-07-15

    The Provencale d'Automation et de Mecanique (P.A.M) together with its partner Athelia Solutions is setting its presence on the European Market under the occasion of this event 17. World LP Gas Forum in Berlin, confirming its leading position from its competitors in the application of the latest European directives and more particularly the ATEX. Based in Molleges in the south of France since 1991, Sudco is a manufacturer of pallets and display stands for the transport, storage and distribution of LPG cylinders and industrial gases. Sudco goes forward in the field of innovation. A. Silva Matos uses to execute the painting of its constructions through the traditional equipment of liquid painting, where lines comprising shot blasting chambers, painting chambers and sweating-rooms are included. The expanding activities of Worthington Cylinders is explained here. Sterling Fluid Systems presents a new CEB vertical tank pump for autogas application. Continuing its research in the field of LPG, Lagoplast has created a line of indicator plates and labels in nylon 6 and 66, in order to meet the different requirements that domestic and international regulations submit to the LPG cylinders manufacturers. Rego GmbH Distribution Centre presents its new products, changes and features. (authors)

  4. Micro Manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Manufacturing deals with systems that include products, processes, materials and production systems. These systems have functional requirements, constraints, design parameters and process variables. They must be decomposed in a systematic manner to achieve the best possible system performance....... If a micro manufacturing system isn’t designed rationally and correctly, it will be high-cost, unreliable, and not robust. For micro products and systems it is a continuously increasing challenge to create the operational basis for an industrial production. As the products through product development...... processes are made applicable to a large number of customers, the pressure in regard to developing production technologies that make it possible to produce the products at a reasonable price and in large numbers is growing. The micro/nano manufacturing programme at the Department of Manufacturing...

  5. Smart Manufacturing.

    Science.gov (United States)

    Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

    2015-01-01

    Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.

  6. The dollar and US manufacturing

    OpenAIRE

    Linda S. Goldberg; Keith Crockett

    1998-01-01

    U.S. manufacturing industries are becoming increasingly sensitive to changes in the international value of the dollar. A look at recent studies of exchange rate effects on industry performance suggests that the 1997-98 rise in the dollar may significantly reduce U.S. producers' profits and compel firms to scale back their investment in new plants and equipment.

  7. Mechanical recycling of waste electric and electronic equipment: a review.

    Science.gov (United States)

    Cui, Jirang; Forssberg, Eric

    2003-05-30

    The production of electric and electronic equipment (EEE) is one of the fastest growing areas. This development has resulted in an increase of waste electric and electronic equipment (WEEE). In view of the environmental problems involved in the management of WEEE, many counties and organizations have drafted national legislation to improve the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal. Recycling of WEEE is an important subject not only from the point of waste treatment but also from the recovery of valuable materials.WEEE is diverse and complex, in terms of materials and components makeup as well as the original equipment's manufacturing processes. Characterization of this waste stream is of paramount importance for developing a cost-effective and environmentally friendly recycling system. In this paper, the physical and particle properties of WEEE are presented. Selective disassembly, targeting on singling out hazardous and/or valuable components, is an indispensable process in the practice of recycling of WEEE. Disassembly process planning and innovation of disassembly facilities are most active research areas. Mechanical/physical processing, based on the characterization of WEEE, provides an alternative means of recovering valuable materials. Mechanical processes, such as screening, shape separation, magnetic separation, Eddy current separation, electrostatic separation, and jigging have been widely utilized in recycling industry. However, recycling of WEEE is only beginning. For maximum separation of materials, WEEE should be shredded to small, even fine particles, generally below 5 or 10mm. Therefore, a discussion of mechanical separation processes for fine particles is highlighted in this paper. Consumer electronic equipment (brown goods), such as television sets, video recorders, are most common. It is very costly to perform manual dismantling of those products, due to the fact that brown goods contain very low

  8. Video Analytics

    DEFF Research Database (Denmark)

    This book collects the papers presented at two workshops during the 23rd International Conference on Pattern Recognition (ICPR): the Third Workshop on Video Analytics for Audience Measurement (VAAM) and the Second International Workshop on Face and Facial Expression Recognition (FFER) from Real...... include: re-identification, consumer behavior analysis, utilizing pupillary response for task difficulty measurement, logo detection, saliency prediction, classification of facial expressions, face recognition, face verification, age estimation, super-resolution, pose estimation, and pain recognition...

  9. Video Analytics

    DEFF Research Database (Denmark)

    include: re-identification, consumer behavior analysis, utilizing pupillary response for task difficulty measurement, logo detection, saliency prediction, classification of facial expressions, face recognition, face verification, age estimation, super-resolution, pose estimation, and pain recognition......This book collects the papers presented at two workshops during the 23rd International Conference on Pattern Recognition (ICPR): the Third Workshop on Video Analytics for Audience Measurement (VAAM) and the Second International Workshop on Face and Facial Expression Recognition (FFER) from Real...

  10. Cleaning supplies and equipment

    Science.gov (United States)

    ... gov/ency/patientinstructions/000443.htm Cleaning supplies and equipment To use the sharing features on this page, ... to clean supplies and equipment. Disinfecting Supplies and Equipment Start by wearing the right personal protective equipment ( ...

  11. Media Manual (How to Use Media Equipment).

    Science.gov (United States)

    Jones, Nancy

    Using a workbook format, this guide explains the use of seven types of audiovisual equipment: overhead projector, Bell and Howell 16mm motion picture projector, Dukane filmstrip projector, record player, Kodak slide projector, Wollensak 2552 tape recorder, and JVC videocassette color video system. An introductory section includes (1) a media…

  12. New surface mining equipment for the 80s

    Energy Technology Data Exchange (ETDEWEB)

    Laswell, B.J.; Laswell, G.W.

    1980-12-01

    A few short decades, has seen progress from the pick, shovel, double-jack and muleteam to today's colossal haultrucks, shovels, drills and draglines. To predict future equipment size, design and configuration U.S. equipment and product companies were surveyed. A distillation of many opinions and viewpoints and the explicit predictions of two leading equipment manufacturers is given.

  13. Using Video Monitors for Teaching Color Science.

    Science.gov (United States)

    Chermak, Vincent

    1997-10-01

    The emission spectra of phosphors from video monitors can be used as primary color standards since the color emissions do not vary among manufacturers. As a result, video monitors provide an ideal medium for studying additive and subtractive color mixing. A color monitor, a video graphics program, and a monochromator can be used to obtain both the transmission and absorption spectra of transparent colored films. The graphics program provides the tristimulus values from which the chromaticity coordinates of the films can be obtained. The schema defining these coordinates and how they are used will be described.

  14. Rationalizing virtual reality based on manufacturing paradigms

    NARCIS (Netherlands)

    Damgrave, Roy Gerhardus Johannes; Lutters, Diederick; Drukker, J. W.

    2014-01-01

    Comparing the evolvement of the manufacturing industry of the last century to the way virtual reality is used nowadays some remarkable similarities come to light. Current virtual reality equipment requires a high level of craftsmanship to achieve the maximum results, and often equipment is specially

  15. Aquatic Equipment Information.

    Science.gov (United States)

    Sova, Ruth

    Equipment usually used in water exercise programs is designed for variety, intensity, and program necessity. This guide discusses aquatic equipment under the following headings: (1) equipment design; (2) equipment principles; (3) precautions and contraindications; (4) population contraindications; and (5) choosing equipment. Equipment is used…

  16. Spectral Analysis of Phosphors Used in Video Monitors

    Science.gov (United States)

    Quinn, Brian; Burkhead, David; Henriksen, Peter

    1997-05-01

    Video monitors and color printers provide ideal media for studying additive and subtractive color mixing. Emission spectra from monitors and absorption spectra of toners and inks from printers will be presented. The spectra of the primary additive colors from video monitors do not vary among the manufacturers whereas the primary subtractive color from printers is dependent on the type of printer as well as the manufacturer of toners or inks used in the printers. These spectra will be compared using the CIE system.

  17. vm118_0503c -- Video mosaic segments

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Canadian ROPOS remotely operated vehicle (ROV) outfitted with video equipment (and other devices) was deployed from the NOAA Ship McAurthurII during May-June...

  18. vm119_0601b-- Video mosaic segments

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Canadian ROPOS remotely operated vehicle (ROV) outfitted with video equipment (and other devices) was deployed from the NOAA Ship McAurthurII during May-June...

  19. Green Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Patten, John

    2013-12-31

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  20. Automated Video Quality Assessment for Deep-Sea Video

    Science.gov (United States)

    Pirenne, B.; Hoeberechts, M.; Kalmbach, A.; Sadhu, T.; Branzan Albu, A.; Glotin, H.; Jeffries, M. A.; Bui, A. O. V.

    2015-12-01

    Video provides a rich source of data for geophysical analysis, often supplying detailed information about the environment when other instruments may not. This is especially true of deep-sea environments, where direct visual observations cannot be made. As computer vision techniques improve and volumes of video data increase, automated video analysis is emerging as a practical alternative to labor-intensive manual analysis. Automated techniques can be much more sensitive to video quality than their manual counterparts, so performing quality assessment before doing full analysis is critical to producing valid results.Ocean Networks Canada (ONC), an initiative of the University of Victoria, operates cabled ocean observatories that supply continuous power and Internet connectivity to a broad suite of subsea instruments from the coast to the deep sea, including video and still cameras. This network of ocean observatories has produced almost 20,000 hours of video (about 38 hours are recorded each day) and an additional 8,000 hours of logs from remotely operated vehicle (ROV) dives. We begin by surveying some ways in which deep-sea video poses challenges for automated analysis, including: 1. Non-uniform lighting: Single, directional, light sources produce uneven luminance distributions and shadows; remotely operated lighting equipment are also susceptible to technical failures. 2. Particulate noise: Turbidity and marine snow are often present in underwater video; particles in the water column can have sharper focus and higher contrast than the objects of interest due to their proximity to the light source and can also influence the camera's autofocus and auto white-balance routines. 3. Color distortion (low contrast): The rate of absorption of light in water varies by wavelength, and is higher overall than in air, altering apparent colors and lowering the contrast of objects at a distance.We also describe measures under development at ONC for detecting and mitigating

  1. stil113_0401r -- Point coverage of locations of still frames extracted from video imagery which depict sediment types

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  2. LEAN Manufacturing

    DEFF Research Database (Denmark)

    Bilberg, Arne

      As part of an employment as Technology Architect at the company Linak in combination with research at the University of Southern Denmark, this paper will present results from a strategy process where Lean has been pointed out as being a very strategic element in the Linak Production System....... The mission with the strategy is to obtain competitive production in Denmark and in Western Europe based on the right combination of manufacturing principles, motivated and trained employees, level of automation, and cooperation with suppliers and customers worldwide. The strategy has resulted in technical...

  3. A system for endobronchial video analysis

    Science.gov (United States)

    Byrnes, Patrick D.; Higgins, William E.

    2017-03-01

    Image-guided bronchoscopy is a critical component in the treatment of lung cancer and other pulmonary disorders. During bronchoscopy, a high-resolution endobronchial video stream facilitates guidance through the lungs and allows for visual inspection of a patient's airway mucosal surfaces. Despite the detailed information it contains, little effort has been made to incorporate recorded video into the clinical workflow. Follow-up procedures often required in cancer assessment or asthma treatment could significantly benefit from effectively parsed and summarized video. Tracking diagnostic regions of interest (ROIs) could potentially better equip physicians to detect early airway-wall cancer or improve asthma treatments, such as bronchial thermoplasty. To address this need, we have developed a system for the postoperative analysis of recorded endobronchial video. The system first parses an input video stream into endoscopic shots, derives motion information, and selects salient representative key frames. Next, a semi-automatic method for CT-video registration creates data linkages between a CT-derived airway-tree model and the input video. These data linkages then enable the construction of a CT-video chest model comprised of a bronchoscopy path history (BPH) - defining all airway locations visited during a procedure - and texture-mapping information for rendering registered video frames onto the airwaytree model. A suite of analysis tools is included to visualize and manipulate the extracted data. Video browsing and retrieval is facilitated through a video table of contents (TOC) and a search query interface. The system provides a variety of operational modes and additional functionality, including the ability to define regions of interest. We demonstrate the potential of our system using two human case study examples.

  4. NEI You Tube Videos: Amblyopia

    Medline Plus

    Full Text Available ... NEI YouTube Videos > NEI YouTube Videos: Amblyopia NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration ... Retinopathy of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video for NEI YouTube Videos: ...

  5. NEI You Tube Videos: Amblyopia

    Medline Plus

    Full Text Available ... YouTube Videos > NEI YouTube Videos: Amblyopia NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration Amblyopia ... of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video for NEI YouTube Videos: Amblyopia ...

  6. NEI You Tube Videos: Amblyopia

    Science.gov (United States)

    ... YouTube Videos > NEI YouTube Videos: Amblyopia NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration Amblyopia ... of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video for NEI YouTube Videos: Amblyopia ...

  7. Subsea equipment marriage is top ROV priority

    Energy Technology Data Exchange (ETDEWEB)

    Redden, J.

    1985-04-01

    Interfacing subsea equipment with remotely operated vehicles (ROV's) and the further development of arctic-class units are the primary challenges facing manufacturers. Worldwide use of the ROV for drilling support has exploded during this decade as oil companies continue their search in deeper waters. If the unmanned vehicles are to become an even more integral tool of the oilman, experts say they must be able to perform more complex tasks. The evolution of more multi-purpose ROVs, however, hinges on the redesigning of subsea equipment. The severe limitations on subsea support (by ROVs) is the obsolete design associated with the subsea equipment itself. These limitations are discussed.

  8. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos was designed ... Activity Role of Body Weight in Osteoarthritis Educational Videos for Patients Rheumatoid Arthritis Educational Video Series Psoriatic ...

  9. An Analysis Of Additive Manufacturing Production Problems And Solutions

    Science.gov (United States)

    2016-12-01

    2, 2016). All of the skills he learned came from reading manuals and watching YouTube videos (Jonathan Lukesh, personal communication, August 2...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT AN ANALYSIS OF ADDITIVE MANUFACTURING PRODUCTION...December 2016 3. REPORT TYPE AND DATES COVERED MBA professional report 4. TITLE AND SUBTITLE AN ANALYSIS OF ADDITIVE MANUFACTURING PRODUCTION PROBLEMS

  10. 61214++++','DOAJ-ART-EN'); return false;" href="+++++https://jual.nipissingu.ca/wp-content/uploads/sites/25/2014/06/v61214.m4v">61214++++">Jailed - Video

    Directory of Open Access Journals (Sweden)

    Cameron CULBERT

    2012-07-01

    Full Text Available As the public education system in Northern Ontario continues to take a downward spiral, a plethora of secondary school students are being placed in an alternative educational environment. Juxtaposing the two educational settings reveals very similar methods and characteristics of educating our youth as opposed to using a truly alternative approach to education. This video reviews the relationship between public education and alternative education in a remote Northern Ontario setting. It is my belief that the traditional methods of teaching are not appropriate in educating at risk students in alternative schools. Paper and pencil worksheets do not motivate these students to learn and succeed. Alternative education should emphasize experiential learning, a just in time curriculum based on every unique individual and the students true passion for everyday life. Cameron Culbert was born on February 3rd, 1977 in North Bay, Ontario. His teenage years were split between attending public school and his willed curriculum on the ski hill. Culbert spent 10 years (1996-2002 & 2006-2010 competing for Canada as an alpine ski racer. His passion for teaching and coaching began as an athlete and has now transferred into the classroom and the community. As a graduate of Nipissing University (BA, BEd, MEd. Camerons research interests are alternative education, physical education and technology in the classroom. Currently Cameron is an active educator and coach in Northern Ontario.

  11. CT-assisted agile manufacturing

    Science.gov (United States)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  12. Video Design Games

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Christensen, Kasper Skov; Iversen, Ole Sejer

    We introduce Video Design Games to train educators in teaching design. The Video Design Game is a workshop format consisting of three rounds in which participants observe, reflect and generalize based on video snippets from their own practice. The paper reports on a Video Design Game workshop...

  13. From different angles : Exploring and applying the design potential of video

    NARCIS (Netherlands)

    Pasman, G.J.

    2012-01-01

    Recent developments in both hardware and software have brought video within the scope of design students as a new visual design tool. Being more and more equipped with cameras, for example in their smartphones, and video editing programs on their computers, they are increasing using video to record

  14. Characterization of social video

    Science.gov (United States)

    Ostrowski, Jeffrey R.; Sarhan, Nabil J.

    2009-01-01

    The popularity of social media has grown dramatically over the World Wide Web. In this paper, we analyze the video popularity distribution of well-known social video websites (YouTube, Google Video, and the AOL Truveo Video Search engine) and characterize their workload. We identify trends in the categories, lengths, and formats of those videos, as well as characterize the evolution of those videos over time. We further provide an extensive analysis and comparison of video content amongst the main regions of the world.

  15. Materials handling equipment and systems from Krupp

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-10-01

    The article reviews the full range of equipment available from the manufacturer Krupp Foerdertechnik. It includes: stockyard systems (scraper type reclaimers and blending beds, bucket wheels, stackers, conveyor systems, bunkers and loading systems); strip loaders and unloaders; cranes; mining systems and components. The company also offers a customised service to meet special requirements. 8 photos.

  16. Energy Efficiency in Manufacturing Systems

    CERN Document Server

    Thiede, Sebastian

    2012-01-01

    Energy consumption is of great interest to manufacturing companies. Beyond considering individual processes and machines, the perspective on process chains and factories as a whole holds major potentials for energy efficiency improvements. To exploit these potentials, dynamic interactions of different processes as well as auxiliary equipment (e.g. compressed air generation) need to be taken into account. In addition, planning and controlling manufacturing systems require  balancing technical, economic and environmental objectives. Therefore, an innovative and comprehensive methodology – with a generic energy flow-oriented manufacturing simulation environment as a core element – is developed and embedded into a step-by-step application cycle. The concept is applied in its entirety to a wide range of case studies such as aluminium die casting, weaving mills, and printed circuit board assembly in order to demonstrate the broad applicability and the benefits that can be achieved.

  17. An overview of new video techniques

    CERN Document Server

    Parker, R

    1999-01-01

    Current video transmission and distribution systems at CERN use a variety of analogue techniques which are several decades old. It will soon be necessary to replace this obsolete equipment, and the opportunity therefore exists to rationalize the diverse systems now in place. New standards for digital transmission and distribution are now emerging. This paper gives an overview of these new standards and of the underlying technology common to many of them. The paper reviews Digital Video Broadcasting (DVB), the Motion Picture Experts Group specifications (MPEG1, MPEG2, MPEG4, and MPEG7), videoconferencing standards (H.261 etc.), and packet video systems, together with predictions of the penetration of these standards into the consumer market. The digital transport mechanisms now available (IP, SDH, ATM) are also reviewed, and the implication of widespread adoption of these systems on video transmission and distribution is analysed.

  18. Video visual analytics

    OpenAIRE

    Höferlin, Markus Johannes

    2013-01-01

    The amount of video data recorded world-wide is tremendously growing and has already reached hardly manageable dimensions. It originates from a wide range of application areas, such as surveillance, sports analysis, scientific video analysis, surgery documentation, and entertainment, and its analysis represents one of the challenges in computer science. The vast amount of video data renders manual analysis by watching the video data impractical. However, automatic evaluation of video material...

  19. Network video transmission system based on SOPC

    Science.gov (United States)

    Zhang, Zhengbing; Deng, Huiping; Xia, Zhenhua

    2008-03-01

    Video systems have been widely used in many fields such as conferences, public security, military affairs and medical treatment. With the rapid development of FPGA, SOPC has been paid great attentions in the area of image and video processing in recent years. A network video transmission system based on SOPC is proposed in this paper for the purpose of video acquisition, video encoding and network transmission. The hardware platform utilized to design the system is an SOPC board of model Altera's DE2, which includes an FPGA chip of model EP2C35F672C6, an Ethernet controller and a video I/O interface. An IP core, known as Nios II embedded processor, is used as the CPU of the system. In addition, a hardware module for format conversion of video data, and another module to realize Motion-JPEG have been designed with Verilog HDL. These two modules are attached to the Nios II processor as peripheral equipments through the Avalon bus. Simulation results show that these two modules work as expected. Uclinux including TCP/IP protocol as well as the driver of Ethernet controller is chosen as the embedded operating system and an application program scheme is proposed.

  20. Economic benefits of metrology in manufacturing

    DEFF Research Database (Denmark)

    Savio, Enrico; De Chiffre, Leonardo; Carmignato, S.

    2016-01-01

    In streamlined manufacturing systems, the added value of inspection activities is often questioned, and metrology in particular is sometimes considered only as an avoidable expense. Documented quantification of economic benefits of metrology is generally not available. This work presents concrete...... and process design stages, as well as on the improved accuracy and efficiency of manufacturing through better measuring equipment and process chains with integrated metrology for process control....

  1. The impact of fit manufacturing on green manufacturing: A review

    Science.gov (United States)

    Qi, Ang Nian; Sin, Tan Chan; Fathullah, M.; Lee, C. C.

    2017-09-01

    Fit manufacturing and Green manufacturing are a new trend principle and concept. They are getting popular in industrial. This paper is identifying the impact between Fit manufacturing and Green manufacturing. Besides Fit manufacturing, Lean manufacturing, Agile manufacturing and Sustainable manufacturing gives big impacts to Green Manufacturing. On top of that, this paper also discuss the benefits of applying Fit manufacturing and Green manufacturing in industrial as well as environment. Hence, applications of Fit manufacturing and Green Manufacturing are increasing year by year.

  2. Decision making in the manufacturing environment using graph theory and fuzzy multiple attribute decision making methods

    CERN Document Server

    Rao, Ravipudi Venkata

    2007-01-01

    Manufacturing is the backbone of any industrialized nation. Recent worldwide advances in manufacturing technologies have brought about a metamorphism in the industry. Fast-changing technologies on the product front have created a need for an equally fast response from manufacturing industries. To meet these challenges, manufacturing industries have to select appropriate manufacturing strategies, product designs, manufacturing processes, work piece and tool materials, and machinery and equipment. The selection decisions are complex as decision making is more challenging today. Decision makers i

  3. From different angles: Exploring and applying the design potential of video

    OpenAIRE

    Pasman, G.J.

    2012-01-01

    Recent developments in both hardware and software have brought video within the scope of design students as a new visual design tool. Being more and more equipped with cameras, for example in their smartphones, and video editing programs on their computers, they are increasing using video to record their research activities or present their design ideas. In design education, however, the full potential of video as a rich and contextual design medium is yet to be explored and developed. This p...

  4. Additive manufacturing – a sustainable manufacturing route

    Directory of Open Access Journals (Sweden)

    Frăţilă Domniţa

    2017-01-01

    Full Text Available Additive Manufacturing (AM technologies allow developing and manufacturing very complex shaped parts and functional products with a high level of customization, being a great alternative to Traditional Manufacturing (TM methods like injection molding, die-casting or machining. Due to the importance of cleaner production in the field of manufacturing processes, sustainability of AM processes needs to be assessed in order to make easier its acceptance and implementation in the industry. Furthermore, the manufacturers can improve their competitiveness and profitability by considering the ecological aspects during the manufacturing step of a product. This paper gives a survey on sustainability issues related to AM.

  5. A new video studio for CERN

    CERN Multimedia

    Anaïs Vernede

    2011-01-01

    On Monday, 14 February 2011 CERN's new video studio was inaugurated with a recording of "Spotlight on CERN", featuring an interview with the DG, Rolf Heuer.   CERN's new video studio. Almost all international organisations have a studio for their audiovisual communications, and now it's CERN’s turn to acquire such a facility. “In the past, we've made videos using the Globe audiovisual facilities and sometimes using the small photographic studio, which is equipped with simple temporary sets that aren’t really suitable for video,” explains Jacques Fichet, head of CERN‘s audiovisual service. Once the decision had been taken to create the new 100 square-metre video studio, the work took only five months to complete. The studio, located in Building 510, is equipped with a cyclorama (a continuous smooth white wall used as a background) measuring 3 m in height and 16 m in length, as well as a teleprompter, a rail-mounted camera dolly fo...

  6. 21 CFR 211.63 - Equipment design, size, and location.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment design, size, and location. 211.63 Section 211.63 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211...

  7. Sectoral Innovation Performance in the Electrical and Optical Equipment Sector

    NARCIS (Netherlands)

    Broek, T. van den; Giessen, A.M. van der

    2010-01-01

    The Electrical and Optical equipment sector is a high-tech manufacturing sector. It is one of the most innovative sectors in Europe with investments and advances in fundamental research, applied R&D and innovation in the actual use of equipment. This sector is also one of the most global sectors

  8. Avaliação do desempenho de uma manufatura de equipamentos eletrônicos segundo critérios de competição Performance assessment of a manufacture firm of electronic equipment in terms of competitive priorities

    Directory of Open Access Journals (Sweden)

    Miguel Afonso Sellitto

    2006-04-01

    Full Text Available Este artigo apresenta um caso em que foi avaliado o desempenho de uma manufatura de equipamentos eletrônicos segundo critérios de competição. O objetivo de pesquisa é propor e testar um método para esta avaliação, que inclui um grupo focado conduzido pelo pesquisador junto a estrategistas da empresa. A estratégia existente foi traduzida em uma estrutura em árvore ponderada pelo método AHP. A estrutura deu origem a um questionário, que avaliou o desempenho geral e o desempenho parcial dos diversos critérios de competição que compõem a estratégia, segundo os respondentes. Comparando-se a importância relativa de cada critério com o seu desempenho, estabeleceram-se prioridades estratégicas para a manufatura. Como continuidade de pesquisas, sugere-se o uso do método para a reformulação das atuais estratégias e para a identificação de indicadores de medição direta, em complementação à medição indireta obtida pelo uso do questionário.This paper reports the performance assessment of a manufacturer firm of electronic equipment in terms of his competitive priorities. The research goal is to propose and test a method for this assessment, beginning with a focus group led by the researcher with the strategic management team of the firm, in which the manufacturing strategy in use was reported as a tree-like structure, weighted with the aid of the AHP. The structure gave rise to a questionnaire, in which the team assessed the actual performance of the strategy as a hole and issue by issue. By comparing the assessed performance with the relative importance of the strategic issues, one can prioritize strategy formulations for the manufacture. For the sake of continuity, one suggests the use of the method for modifications in the existing strategy and for pointing out direct-measured indicators, in addiction to the indirect assessing method now developed.

  9. Requirements and Matching Software Technologies for Sustainable and Agile Manufacturing Systems

    NARCIS (Netherlands)

    Pascal Muller; Daniël Telgen; Ing. Erik Puik; Leo van Moergestel

    2013-01-01

    Sustainable and Agile manufacturing is expected of future generation manufacturing systems. The goal is to create scalable, reconfigurable and adaptable manufacturing systems which are able to produce a range of products without new investments into new manufacturing equipment. This requires a new

  10. Advanced Manufacturing Technologies

    Science.gov (United States)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  11. Export of electronics equipment waste.

    Science.gov (United States)

    LaDou, Joseph; Lovegrove, Sandra

    2008-01-01

    Electronics equipment waste ("e-waste") includes discarded computers, computer monitors, television sets, and cell phones. Less than 10% of e-waste is currently recycled. The United States and other developed countries export e-waste primarily to Asia, knowing it carries a real harm to the poor communities where it will be discarded. A 2006 directive bans the use of lead, mercury, cadmium, hexavalent chromium, and certain brominated flame retardants in most electronics products sold in the EU. A similar directive facilitates the development and design of clean electronics products with longer lifespans that are safe and easy to repair, upgrade, and recycle, and will not expose workers and the environment to hazardous chemicals. These useful approaches apply only regionally and cover only a fraction of the hazardous substances used in electronics manufacture, however. There is an urgent need for manufacturers of electronics products to take responsibility for their products from production to end-of-life, and for much tighter controls both on the transboundary movement of e-waste and on the manner in which it is recycled. Manufacturers must develop clean products with longer lifespans that are safe and easy to repair, upgrade, and recycle and will not expose workers and the environment to hazardous chemicals.

  12. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... support group for me? Find a Group Upcoming Events Video Library Photo Gallery One-on-One Support ... group for me? Find a group Back Upcoming events Video Library Photo Gallery One-on-One Support ...

  13. Video Games and Citizenship

    National Research Council Canada - National Science Library

    Bourgonjon, Jeroen; Soetaert, Ronald

    2013-01-01

    ... by exploring a particular aspect of digitization that affects young people, namely video games. They explore the new social spaces which emerge in video game culture and how these spaces relate to community building and citizenship...

  14. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... Doctor Find a Provider Meet the Team Blog Articles News Resources Links Videos Podcasts Webinars For the ... Doctor Find a Provider Meet the Team Blog Articles News Provider Directory Donate Resources Links Videos Podcasts ...

  15. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... Doctor Find a Provider Meet the Team Blog Articles & Stories News Resources Links Videos Podcasts Webinars For ... Doctor Find a Provider Meet the Team Blog Articles & Stories News Provider Directory Donate Resources Links Videos ...

  16. Digital Video in Research

    DEFF Research Database (Denmark)

    Frølunde, Lisbeth

    2012-01-01

    questions of our media literacy pertaining to authoring multimodal texts (visual, verbal, audial, etc.) in research practice and the status of multimodal texts in academia. The implications of academic video extend to wider issues of how researchers harness opportunities to author different types of texts......Is video becoming “the new black” in academia, if so, what are the challenges? The integration of video in research methodology (for collection, analysis) is well-known, but the use of “academic video” for dissemination is relatively new (Eriksson and Sørensen). The focus of this paper is academic...... video, or short video essays produced for the explicit purpose of communicating research processes, topics, and research-based knowledge (see the journal of academic videos: www.audiovisualthinking.org). Video is increasingly used in popular showcases for video online, such as YouTube and Vimeo, as well...

  17. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Back Support Groups Is a support group for me? Find a Group Upcoming Events Video Library Photo ... Support Groups Back Is a support group for me? Find a group Back Upcoming events Video Library ...

  18. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... group for me? Find a Group Upcoming Events Video Library Photo Gallery One-on-One Support ANetwork ... for me? Find a group Back Upcoming events Video Library Photo Gallery One-on-One Support Back ...

  19. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... the Team Blog Articles & Stories News Resources Links Videos Podcasts Webinars For the Media For Clinicians For ... Family Caregivers Glossary Menu In this section Links Videos Podcasts Webinars For the Media For Clinicians For ...

  20. Videos, Podcasts and Livechats

    Science.gov (United States)

    ... the Team Blog Articles & Stories News Resources Links Videos Podcasts Webinars For the Media For Clinicians For ... Family Caregivers Glossary Menu In this section Links Videos Podcasts Webinars For the Media For Clinicians For ...

  1. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... a Provider Meet the Team Blog Articles & Stories News Resources Links Videos Podcasts Webinars For the Media ... a Provider Meet the Team Blog Articles & Stories News Provider Directory Donate Resources Links Videos Podcasts Webinars ...

  2. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... for me? Find a Group Upcoming Events Video Library Photo Gallery One-on-One Support ANetwork Peer ... me? Find a group Back Upcoming events Video Library Photo Gallery One-on-One Support Back ANetwork ...

  3. Video Screen Capture Basics

    Science.gov (United States)

    Dunbar, Laura

    2014-01-01

    This article is an introduction to video screen capture. Basic information of two software programs, QuickTime for Mac and BlueBerry Flashback Express for PC, are also discussed. Practical applications for video screen capture are given.

  4. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... News Resources Links Videos Podcasts Webinars For the Media For Clinicians For Policymakers For Family Caregivers Glossary ... this section Links Videos Podcasts Webinars For the Media For Clinicians For Policymakers For Family Caregivers Glossary ...

  5. Security and Privacy in Video Surveillance: Requirements and Challenges

    DEFF Research Database (Denmark)

    Mahmood Rajpoot, Qasim; Jensen, Christian D.

    2014-01-01

    Use of video surveillance has substantially increased in the last few decades. Modern video surveillance systems are equipped with techniques that allow traversal of data in an effective and efficient manner, giving massive powers to operators and potentially compromising the privacy of anyone...... observed by the system. Several techniques to protect the privacy of individuals have therefore been proposed, but very little research work has focused on the specific security requirements of video surveillance data (in transit or in storage) and on authorizing access to this data. In this paper, we...... present a general model of video surveillance systems that will help identify the major security and privacy requirements for a video surveillance system and we use this model to identify practical challenges in ensuring the security of video surveillance data in all stages (in transit and at rest). Our...

  6. Additive manufacturing – a sustainable manufacturing route

    OpenAIRE

    Frăţilă Domniţa; Rotaru Horaţiu

    2017-01-01

    Additive Manufacturing (AM) technologies allow developing and manufacturing very complex shaped parts and functional products with a high level of customization, being a great alternative to Traditional Manufacturing (TM) methods like injection molding, die-casting or machining. Due to the importance of cleaner production in the field of manufacturing processes, sustainability of AM processes needs to be assessed in order to make easier its acceptance and implementation in the industry. Furth...

  7. Smart sensing surveillance video system

    Science.gov (United States)

    Hsu, Charles; Szu, Harold

    2016-05-01

    An intelligent video surveillance system is able to detect and identify abnormal and alarming situations by analyzing object movement. The Smart Sensing Surveillance Video (S3V) System is proposed to minimize video processing and transmission, thus allowing a fixed number of cameras to be connected on the system, and making it suitable for its applications in remote battlefield, tactical, and civilian applications including border surveillance, special force operations, airfield protection, perimeter and building protection, and etc. The S3V System would be more effective if equipped with visual understanding capabilities to detect, analyze, and recognize objects, track motions, and predict intentions. In addition, alarm detection is performed on the basis of parameters of the moving objects and their trajectories, and is performed using semantic reasoning and ontologies. The S3V System capabilities and technologies have great potential for both military and civilian applications, enabling highly effective security support tools for improving surveillance activities in densely crowded environments. It would be directly applicable to solutions for emergency response personnel, law enforcement, and other homeland security missions, as well as in applications requiring the interoperation of sensor networks with handheld or body-worn interface devices.

  8. Making good physics videos

    Science.gov (United States)

    Lincoln, James

    2017-05-01

    Online videos are an increasingly important way technology is contributing to the improvement of physics teaching. Students and teachers have begun to rely on online videos to provide them with content knowledge and instructional strategies. Online audiences are expecting greater production value, and departments are sometimes requesting educators to post video pre-labs or to flip our classrooms. In this article, I share my advice on creating engaging physics videos.

  9. Desktop video conferencing

    OpenAIRE

    Potter, Ray; Roberts, Deborah

    2007-01-01

    This guide aims to provide an introduction to Desktop Video Conferencing. You may be familiar with video conferencing, where participants typically book a designated conference room and communicate with another group in a similar room on another site via a large screen display. Desktop video conferencing (DVC), as the name suggests, allows users to video conference from the comfort of their own office, workplace or home via a desktop/laptop Personal Computer. DVC provides live audio and visua...

  10. Exercise Equipment: Neutral Buoyancy

    Science.gov (United States)

    Shackelford, Linda; Valle, Paul

    2016-01-01

    Load Bearing Equipment for Neutral Buoyancy (LBE-NB) is an exercise frame that holds two exercising subjects in position as they apply counter forces to each other for lower extremity and spine loading resistance exercises. Resistance exercise prevents bone loss on ISS, but the ISS equipment is too massive for use in exploration craft. Integrating the human into the load directing, load generating, and motion control functions of the exercise equipment generates safe exercise loads with less equipment mass and volume.

  11. From product to service orientation in the maritime equipment industry

    DEFF Research Database (Denmark)

    Matzen, Detlef; McAloone, Timothy Charles

    2008-01-01

    In the shipping industry, operational performance of ships and their equipment is crucial to business. Suppliers of machinery and equipment are aware of this situation and see business development potential in setting up service systems that are dedicated to ensuring the performance...... of their products in operation. In this paper we present a case study of a shipping equipment manufacturer that is currently shifting business focus from manufacturing towards services delivery. Using a modelling scheme to differentiate and categorise different development tasks within the frame of business...

  12. 47 CFR 79.3 - Video description of video programming.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Video description of video programming. 79.3... CLOSED CAPTIONING AND VIDEO DESCRIPTION OF VIDEO PROGRAMMING § 79.3 Video description of video programming. (a) Definitions. For purposes of this section the following definitions shall apply: (1...

  13. Fundamentals of semiconductor manufacturing and process control

    CERN Document Server

    May, Gary S

    2006-01-01

    A practical guide to semiconductor manufacturing from process control to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Control covers all issues involved in manufacturing microelectronic devices and circuits, including fabrication sequences, process control, experimental design, process modeling, yield modeling, and CIM/CAM systems. Readers are introduced to both the theory and practice of all basic manufacturing concepts. Following an overview of manufacturing and technology, the text explores process monitoring methods, including those that focus on product wafers and those that focus on the equipment used to produce wafers. Next, the text sets forth some fundamentals of statistics and yield modeling, which set the foundation for a detailed discussion of how statistical process control is used to analyze quality and improve yields. The discussion of statistical experimental design offers readers a powerful approach for systematically varying controllable p...

  14. Video Self-Modeling

    Science.gov (United States)

    Buggey, Tom; Ogle, Lindsey

    2012-01-01

    Video self-modeling (VSM) first appeared on the psychology and education stage in the early 1970s. The practical applications of VSM were limited by lack of access to tools for editing video, which is necessary for almost all self-modeling videos. Thus, VSM remained in the research domain until the advent of camcorders and VCR/DVD players and,…

  15. Tracing Sequential Video Production

    DEFF Research Database (Denmark)

    Otrel-Cass, Kathrin; Khalid, Md. Saifuddin

    2015-01-01

    With an interest in learning that is set in collaborative situations, the data session presents excerpts from video data produced by two of fifteen students from a class of 5th semester techno-anthropology course. Students used video cameras to capture the time they spent working with a scientist...... video, nature of the interactional space, and material and spatial semiotics....

  16. Developing a Promotional Video

    Science.gov (United States)

    Epley, Hannah K.

    2014-01-01

    There is a need for Extension professionals to show clientele the benefits of their program. This article shares how promotional videos are one way of reaching audiences online. An example is given on how a promotional video has been used and developed using iMovie software. Tips are offered for how professionals can create a promotional video and…

  17. Three-dimensional video presentation of microsurgery by the cross-eyed viewing method using a high-definition video system.

    Science.gov (United States)

    Terakawa, Yuzo; Ishibashi, Kenichi; Goto, Takeo; Ohata, Kenji

    2011-01-01

    Three-dimensional (3-D) video recording of microsurgery is a more promising tool for presentation and education of microsurgery than conventional two-dimensional video systems, but has not been widely adopted partly because 3-D image processing of previous 3-D video systems is complicated and observers without optical devices cannot visualize the 3-D image. A new technical development for 3-D video presentation of microsurgery is described. Microsurgery is recorded with a microscope equipped with a single high-definition (HD) video camera. This 3-D video system records the right- and left-eye views of the microscope simultaneously as single HD data with the use of a 3-D camera adapter: the right- and left-eye views of the microscope are displayed separately on the right and left sides, respectively. The operation video is then edited with video editing software so that the right-eye view is displayed on the left side and left-eye view is displayed on the right side. Consequently, a 3-D video of microsurgery can be created by viewing the edited video by the cross-eyed stereogram viewing method without optical devices. The 3-D microsurgical video provides a more accurate view, especially with regard to depth, and a better understanding of microsurgical anatomy. Although several issues are yet to be addressed, this 3-D video system is a useful method of recording and presenting microsurgery for 3-D viewing with currently available equipment, without optical devices.

  18. Tribology in Manufacturing Technology

    CERN Document Server

    2013-01-01

    The present book aims to provide research advances on tribology in manufacturing technology for modern industry. This book can be used as a research book for final undergraduate engineering course (for example, mechanical, manufacturing, materials, etc) or as a subject on manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, manufacturing and tribology researchers, mechanical, mechanical, manufacturing and materials engineers, professionals in related industries with manufacturing and tribology.

  19. vid116_0501n -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  20. vid116_0501c -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  1. vid116_0501s -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  2. vid116_0501d -- Point coverage of sediment observations from video collected during 2005 R/V Tatoosh camera sled survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vesselTatoosh during August 2005. Video data from...

  3. Olympic Coast National Marine Sanctuary - stil120_0602a - Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during September 2006. Video data...

  4. still116_0501n-- Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vesselTatoosh during August 2005. Video data from...

  5. still116_0501d-- Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  6. still116_0501c-- Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  7. still116_0501s-- Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  8. still114_0402c-- Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  9. still115_0403-- Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  10. still114_0402b-- Point coverage of locations of still frames extracted from video imagery which depict sediment types at various locations.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A custom built camera sled outfitted with video equipment (and other devices) was deployed from the NOAA research vessel Tatoosh during August 2005. Video data from...

  11. New Test Set for Video Quality Benchmarking

    Science.gov (United States)

    Raventos, Joaquin

    A new test set design and benchmarking approach (US Patent pending) allows a "standard observer" to assess the end-to-end image quality characteristics of video imaging systems operating in day time or low-light conditions. It uses randomized targets based on extensive application of Photometry, Geometrical Optics, and Digital Media. The benchmarking takes into account the target's contrast sensitivity, its color characteristics, and several aspects of human vision such as visual acuity and dynamic response. The standard observer is part of the "extended video imaging system" (EVIS). The new test set allows image quality benchmarking by a panel of standard observers at the same time. The new approach shows that an unbiased assessment can be guaranteed. Manufacturers, system integrators, and end users will assess end-to-end performance by simulating a choice of different colors, luminance levels, and dynamic conditions in the laboratory or in permanent video systems installations.

  12. Advanced video coding systems

    CERN Document Server

    Gao, Wen

    2015-01-01

    This comprehensive and accessible text/reference presents an overview of the state of the art in video coding technology. Specifically, the book introduces the tools of the AVS2 standard, describing how AVS2 can help to achieve a significant improvement in coding efficiency for future video networks and applications by incorporating smarter coding tools such as scene video coding. Topics and features: introduces the basic concepts in video coding, and presents a short history of video coding technology and standards; reviews the coding framework, main coding tools, and syntax structure of AV

  13. Intelligent video surveillance systems

    CERN Document Server

    Dufour, Jean-Yves

    2012-01-01

    Belonging to the wider academic field of computer vision, video analytics has aroused a phenomenal surge of interest since the current millennium. Video analytics is intended to solve the problem of the incapability of exploiting video streams in real time for the purpose of detection or anticipation. It involves analyzing the videos using algorithms that detect and track objects of interest over time and that indicate the presence of events or suspect behavior involving these objects.The aims of this book are to highlight the operational attempts of video analytics, to identify possi

  14. VBR video traffic models

    CERN Document Server

    Tanwir, Savera

    2014-01-01

    There has been a phenomenal growth in video applications over the past few years. An accurate traffic model of Variable Bit Rate (VBR) video is necessary for performance evaluation of a network design and for generating synthetic traffic that can be used for benchmarking a network. A large number of models for VBR video traffic have been proposed in the literature for different types of video in the past 20 years. Here, the authors have classified and surveyed these models and have also evaluated the models for H.264 AVC and MVC encoded video and discussed their findings.

  15. Space Heating Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

  16. PROTOTIPE VIDEO EDITOR DENGAN MENGGUNAKAN DIRECT X DAN DIRECT SHOW

    Directory of Open Access Journals (Sweden)

    Djoni Haryadi Setiabudi

    2004-01-01

    Full Text Available Technology development had given people the chance to capture their memorable moments in video format. A high quality digital video is a result of a good editing process. Which in turn, arise the new need of an editor application. In accordance to the problem, here the process of making a simple application for video editing needs. The application development use the programming techniques often applied in multimedia applications, especially video. First part of the application will begin with the video file compression and decompression, then we'll step into the editing part of the digital video file. Furthermore, the application also equipped with the facilities needed for the editing processes. The application made with Microsoft Visual C++ with DirectX technology, particularly DirectShow. The application provides basic facilities that will help the editing process of a digital video file. The application will produce an AVI format file after the editing process is finished. Through the testing process of this application shows the ability of this application to do the 'cut' and 'insert' of video files in AVI, MPEG, MPG and DAT formats. The 'cut' and 'insert' process only can be done in static order. Further, the aplication also provide the effects facility for transition process in each clip. Lastly, the process of saving the new edited video file in AVI format from the application. Abstract in Bahasa Indonesia : Perkembangan teknologi memberi kesempatan masyarakat untuk mengabadikan saat - saat yang penting menggunakan video. Pembentukan video digital yang baik membutuhkan proses editing yang baik pula. Untuk melakukan proses editing video digital dibutuhkan program editor. Berdasarkan permasalahan diatas maka pada penelitian ini dibuat prototipe editor sederhana untuk video digital. Pembuatan aplikasi memakai teknik pemrograman di bidang multimedia, khususnya video. Perencanaan dalam pembuatan aplikasi tersebut dimulai dengan pembentukan

  17. Inspection of nuclear pressure equipment: principles, issues and perspectives; Le controle des equipements sous pression nucleaires: principes, enjeux et perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Limousin, S. [Autorite de Surete Nucleaire (ASN), Dir. des Equipements sous Pression Nucleaires, 75 - Paris (France)

    2010-02-15

    French regulations about nuclear pressure equipment (like steam generators and the reactor pressure vessel) take into account hazards due to the energy contained in the equipment but also add specific requirements due for instance to the radioactivity or safety for instance. ASN is in charge of the conformity assessment of the most important equipment and monitors the licensee who is responsible of in service inspection and maintenance. Because of the internationalization of nuclear component manufacturing, and consequently new comers in this area, a careful monitoring of subcontractors is needed. The major anomalies detected in steam generator over the past few years showed the necessity of being careful and humble towards degradation mechanisms. Nuclear pressure equipment regulations enables ASN to perform an efficient oversight of licensees and component manufacturer in a context of international manufacturing and licence renewal. (author)

  18. TECHNOLOGICAL CHANGES IN THE CEMENT MANUFACTURING INDUSTRY.

    Science.gov (United States)

    WESSON, CARL E.

    THE PURPOSE OF THIS STUDY IS TO PRESENT A PRELIMINARY PICTURE OF OCCUPATIONAL CHANGES BROUGHT ABOUT IN THE MANUFACTURE OF CEMENT AS A RESULT OF INTRODUCING AUTOMATED EQUIPMENT. ONE AUTOMATED AND SEVERAL CONVENTIONAL TYPE CEMENT PLANTS WERE STUDIED. ANALYSIS OF DATA OBTAINED THROUGH RESEARCH AND DATA COLLECTED DURING THE STUDY REVEALED THAT…

  19. International photovoltaic products and manufacturers directory, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Shepperd, L.W. [ed.] [Florida Solar Energy Center, Cocoa, FL (United States)

    1995-11-01

    This international directory of more than 500 photovoltaic-related manufacturers is intended to guide potential users of photovoltaics to sources for systems and their components. Two indexes help the user to locate firms and materials. A glossary describes equipment and terminology commonly used in the photovoltaic industry.

  20. Renewal of radiological equipment.

    Science.gov (United States)

    2014-10-01

    In this century, medical imaging is at the heart of medical practice. Besides providing fast and accurate diagnosis, advances in radiology equipment offer new and previously non-existing options for treatment guidance with quite low morbidity, resulting in the improvement of health outcomes and quality of life for the patients. Although rapid technological development created new medical imaging modalities and methods, the same progress speed resulted in accelerated technical and functional obsolescence of the same medical imaging equipment, consequently creating a need for renewal. Older equipment has a high risk of failures and breakdowns, which might cause delays in diagnosis and treatment of the patient, and safety problems both for the patient and the medical staff. The European Society of Radiology is promoting the use of up-to-date equipment, especially in the context of the EuroSafe Imaging Campaign, as the use of up-to-date equipment will improve quality and safety in medical imaging. Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or renewal. This plan should look forward a minimum of 5 years, with annual updates. Teaching points • Radiological equipment has a definite life cycle span, resulting in unavoidable breakdown and decrease or loss of image quality which renders equipment useless after a certain time period.• Equipment older than 10 years is no longer state-of-the art equipment and replacement is essential. Operating costs of older equipment will be high when compared with new equipment, and sometimes maintenance will be impossible if no spare parts are available.• Older equipment has a high risk of failure and breakdown, causing delays in diagnosis and treatment of the patient and safety problems both for the patient and the medical staff.• Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or replacement. This plan should look forward a

  1. Flip Video for Dummies

    CERN Document Server

    Hutsko, Joe

    2010-01-01

    The full-color guide to shooting great video with the Flip Video camera. The inexpensive Flip Video camera is currently one of the hottest must-have gadgets. It's portable and connects easily to any computer to transfer video you shoot onto your PC or Mac. Although the Flip Video camera comes with a quick-start guide, it lacks a how-to manual, and this full-color book fills that void! Packed with full-color screen shots throughout, Flip Video For Dummies shows you how to shoot the best possible footage in a variety of situations. You'll learn how to transfer video to your computer and then edi

  2. Factors Affecting Labour Productivity in Manufacturing Enterprises

    Directory of Open Access Journals (Sweden)

    Zbigniew Gołaś

    2010-06-01

    Full Text Available The article presents the results of the analysis of the factors influencing labour productivity in the manufacturing business sector in 2004–2008. Labour productivity was analyzed in the context of the assets productivity, technical equipment of work, labour intensity of production, wages, value added and depreciation costs, and using linear stepwise regression. The study shows that despite significant progress, the level of labour productivity in domestic manufacturing significantly lower than the average in the European Union. Lower than in Poland, the level of labour productivity gain only companies in Romania, Bulgaria, Lithuania, Latvia and Estonia. Estimated parameters of the regression function showed that the most important determinants of labour productivity in manufacturing are technical equipment of work, labour intensity of production, assets productivity, level of added value in relation to revenues. These factors explain the variability of labour productivity in 2004–2008 in a high degree.

  3. Contemporary design and manufacturing technology

    CERN Document Server

    Wang, Taiyong; Zuo, Dunwen

    2013-01-01

    The special topic volume communicates the latest progress and research results of new theory, new technology, method, equipment and so on in Engineering Technology, and to grasp the updated technological and research trends in internationally. The major topics covered by the special volumes include Advanced Materials and Manufacturing Technologies, Control, Automation and Detection Systems, Advanced Design Technology, Optimization and Modeling. In 80 invited and peer-reviewed papers, mechanical and other engineers describe their recent and current research and results in advanced materials and

  4. Educational video recording and editing for the hand surgeon.

    Science.gov (United States)

    Rehim, Shady A; Chung, Kevin C

    2015-05-01

    Digital video recordings are increasingly used across various medical and surgical disciplines including hand surgery for documentation of patient care, resident education, scientific presentations, and publications. In recent years, the introduction of sophisticated computer hardware and software technology has simplified the process of digital video production and improved means of disseminating large digital data files. However, the creation of high-quality surgical video footage requires a basic understanding of key technical considerations, together with creativity and sound aesthetic judgment of the videographer. In this article we outline the practical steps involved in equipment preparation, video recording, editing, and archiving, as well as guidance for the choice of suitable hardware and software equipment. Copyright © 2015 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  5. 40 CFR 205.155 - Motorcycle class and manufacturer abbreviation.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Motorcycle class and manufacturer...) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycles § 205.155 Motorcycle class and manufacturer abbreviation. (a) Motorcycles must be grouped into classes determined by...

  6. Manufacturing network evolution

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2011-01-01

    Purpose – This paper examines the effect of changes at the manufacturing plant level on other plants in the manufacturing network and also investigates the role of manufacturing plants on the evolution of a manufacturing network. Design/methodology/approach –The research questions are developed......, the complex phenomenon of a manufacturing network evolution is observed by combining the analysis of a manufacturing plant and network level. The historical trajectories of manufacturing networks that are presented in the case studies are examined in order to understand and determine the future shape...

  7. Medical equipment management

    CERN Document Server

    Willson, Keith; Tabakov, Slavik

    2013-01-01

    Know What to Expect When Managing Medical Equipment and Healthcare Technology in Your Organization As medical technology in clinical care becomes more complex, clinical professionals and support staff must know how to keep patients safe and equipment working in the clinical environment. Accessible to all healthcare professionals and managers, Medical Equipment Management presents an integrated approach to managing medical equipment in healthcare organizations. The book explains the underlying principles and requirements and raises awareness of what needs to be done and what questions to ask. I

  8. Examining elite Parasport athletes with sport involvement and sports equipment.

    Science.gov (United States)

    Hambrick, Marion E; Hums, Mary A; Bower, Glenna G; Wolff, Eli A

    2015-01-01

    Elite athletes require the most advanced sports equipment to maintain their competitive edge, but manufacturers cannot always satisfy these athletes' specific equipment needs. Sport involvement can influence sports-equipment selections and is described as the process by which individuals rely on attitudes and belief systems to make sports-related consumption decisions. This study involved semistructured interviews with 5 elite Parasport athletes to identify and analyze the role of sport involvement in their selection of sports equipment. The results revealed that the athletes identified product limitations, created a collaborative environment, and promoted a culture of innovation to develop new sports products and address existing limitations. Theoretical and practical implications are discussed.

  9. Understanding Video Games

    DEFF Research Database (Denmark)

    Heide Smith, Jonas; Tosca, Susana Pajares; Egenfeldt-Nielsen, Simon

    From Pong to PlayStation 3 and beyond, Understanding Video Games is the first general introduction to the exciting new field of video game studies. This textbook traces the history of video games, introduces the major theories used to analyze games such as ludology and narratology, reviews...... the economics of the game industry, examines the aesthetics of game design, surveys the broad range of game genres, explores player culture, and addresses the major debates surrounding the medium, from educational benefits to the effects of violence. Throughout the book, the authors ask readers to consider...... larger questions about the medium: * What defines a video game? * Who plays games? * Why do we play games? * How do games affect the player? Extensively illustrated, Understanding Video Games is an indispensable and comprehensive resource for those interested in the ways video games are reshaping...

  10. Collaborative Video Sketching

    DEFF Research Database (Denmark)

    Henningsen, Birgitte; Gundersen, Peter Bukovica; Hautopp, Heidi

    2017-01-01

    This paper introduces to what we define as a collaborative video sketching process. This process links various sketching techniques with digital storytelling approaches and creative reflection processes in video productions. Traditionally, sketching has been used by designers across various...... forms and through empirical examples, we present and discuss the video recording of sketching sessions, as well as development of video sketches by rethinking, redoing and editing the recorded sessions. The empirical data is based on workshop sessions with researchers and students from universities...... and university colleges and primary and secondary school teachers. As researchers, we have had different roles in these action research case studies where various video sketching techniques were applied.The analysis illustrates that video sketching can take many forms, and two common features are important...

  11. Reflections on academic video

    Directory of Open Access Journals (Sweden)

    Thommy Eriksson

    2012-11-01

    Full Text Available As academics we study, research and teach audiovisual media, yet rarely disseminate and mediate through it. Today, developments in production technologies have enabled academic researchers to create videos and mediate audiovisually. In academia it is taken for granted that everyone can write a text. Is it now time to assume that everyone can make a video essay? Using the online journal of academic videos Audiovisual Thinking and the videos published in it as a case study, this article seeks to reflect on the emergence and legacy of academic audiovisual dissemination. Anchoring academic video and audiovisual dissemination of knowledge in two critical traditions, documentary theory and semiotics, we will argue that academic video is in fact already present in a variety of academic disciplines, and that academic audiovisual essays are bringing trends and developments that have long been part of academic discourse to their logical conclusion.

  12. 24 CFR 3280.813 - Outdoor outlets, fixtures, air-conditioning equipment, etc.

    Science.gov (United States)

    2010-04-01

    ... Electrical Systems § 3280.813 Outdoor outlets, fixtures, air-conditioning equipment, etc. (a) Outdoor.../or air conditioning equipment located outside the manufactured home, shall have permanently affixed, adjacent to the outlet, a metal tag which reads: This Connection Is for Air Conditioning Equipment Rated at...

  13. 78 FR 24061 - Minimum Technical Standards for Class II Gaming Systems and Equipment

    Science.gov (United States)

    2013-04-24

    ... Gaming Systems and Equipment AGENCY: National Indian Gaming Commission. ACTION: Final rule. SUMMARY: The... for Class II gaming systems and equipment to harmonize the charitable gaming exemption amount in the... guidance to equipment manufacturers and distributors of Class II gaming systems. The standards did not...

  14. Eye-Movement Tracking Using Compressed Video Images

    Science.gov (United States)

    Mulligan, Jeffrey B.; Beutter, Brent R.; Hull, Cynthia H. (Technical Monitor)

    1994-01-01

    Infrared video cameras offer a simple noninvasive way to measure the position of the eyes using relatively inexpensive equipment. Several commercial systems are available which use special hardware to localize features in the image in real time, but the constraint of realtime performance limits the complexity of the applicable algorithms. In order to get better resolution and accuracy, we have used off-line processing to apply more sophisticated algorithms to the images. In this case, a major technical challenge is the real-time acquisition and storage of the video images. This has been solved using a strictly digital approach, exploiting the burgeoning field of hardware video compression. In this paper we describe the algorithms we have developed for tracking the movements of the eyes in video images, and present experimental results showing how the accuracy is affected by the degree of video compression.

  15. Sound for digital video

    CERN Document Server

    Holman, Tomlinson

    2013-01-01

    Achieve professional quality sound on a limited budget! Harness all new, Hollywood style audio techniques to bring your independent film and video productions to the next level.In Sound for Digital Video, Second Edition industry experts Tomlinson Holman and Arthur Baum give you the tools and knowledge to apply recent advances in audio capture, video recording, editing workflow, and mixing to your own film or video with stunning results. This fresh edition is chockfull of techniques, tricks, and workflow secrets that you can apply to your own projects from preproduction

  16. Green Power Partnership Videos

    Science.gov (United States)

    The Green Power Partnership develops videos on a regular basis that explore a variety of topics including, Green Power partnership, green power purchasing, Renewable energy certificates, among others.

  17. Strategic Roles of Manufacturing

    DEFF Research Database (Denmark)

    Yang, Cheng

    Addressing three development trends of manufacturing, this thesis aims to explore: (1) facing challenges on manufacturing (globalisation, knowledge-based manufacturing and servitisation of manufacturing), what kinds of roles does manufacturing play within industrial companies; (2) along...... with the trend of globalisation, how do industrial companies develop their global manufacturing networks? These two questions are actually interlinked. On the one hand, facing increasing offshoring and outsourcing of production activities, industrial companies have to understand how to develop their global...... manufacturing networks. On the other hand, ongoing globalisation also brings tremendous impacts to post-industrial economies (e.g. Denmark). A dilemma therefore arises, i.e. whether it is still necessary to keep manufacturing in these post-industrial economies; if yes, what kinds of roles manufacturing should...

  18. Small size equipment remote management; La petite telegestion

    Energy Technology Data Exchange (ETDEWEB)

    Mino, E. [Sigma Technologies, 06 - Valbonne (France)

    1995-12-01

    Small remote management is aimed at the remote management of small heating plants or building equipment in collective or individual buildings where a traditional remote management system is hardly applicable for economic or organizational reasons. The French Agency for Environment and Energy Conservation (ADEME) has developed several actions aiming at developing the market with promotion video-cassettes, technical documents and training courses, but reserves have been observed. The various functional services (remote monitoring, metering, accounting, control and regulation, operation) and equipment, the system architecture relating equipment, local and central levels, and the role of the various intervening parties, are described

  19. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...

  20. Interface transfer of equipment

    Energy Technology Data Exchange (ETDEWEB)

    Ashton, I.J.

    1989-04-01

    This article details the interface transfer of heavy-duty face equipment from 5's to 6's face in the Great Row Seam at Silverdale Colliery, British Coal, Western Area. The salvaged face was roofbolted using leg-mounted Wombat drilling rigs. All heavy-duty equipment was transported by FSV's. 5 figs.

  1. Organic conductors as novel ``molecular rulers`` for advanced manufacturing processes

    Energy Technology Data Exchange (ETDEWEB)

    Williams, J.M.

    1995-12-31

    Future advanced manufacturing equipment used in high technology programs will require ultra-high precision and associated machining tool operations that require placement accuracy of {approximately} 1--100 nm (1 nm = 10 {angstrom}). There is consensus among engineers that this equipment will be based on STM (Scanning Tunneling Microscope) technology. All such STM-based ``drivers`` must contain a metrology system that requires absolute length standards referenced to atomic spacings for calibration. Properly designed organic conductor substrate crystals have the potential to be molecular rulers for STM-based advanced manufacturing equipment. The major challenges in future organic conductor research aimed at STM metrology application are listed.

  2. Strengthening the Competitiveness and Sustainability of a Semiconductor Manufacturer with Cloud Manufacturing

    Directory of Open Access Journals (Sweden)

    Toly Chen

    2014-01-01

    Full Text Available Cloud manufacturing (CMfg is a new-generation service-oriented networked manufacturing model that provides distributed users centralized managed manufacturing resources, ability, and services. CMfg is applied here to a semiconductor manufacturing factory. Benefits are classified into five aspects: cost savings, efficiency, additional data analysis capabilities, flexibility, and closer partner relationships. A strength, weakness, opportunity, and threat (SWOT analysis is done which guides a semiconductor manufacturer in planning CMfg implementation projects. Simulation of a wafer fabrication factory (wafer fab is used as an example. Several CMfg services are proposed for assisting the fab simulation activities through the collaboration of cloud service providers, software vendors, equipment suppliers, and the wafer fab. The connection with the competitiveness and sustainability of a wafer fab is also stressed.

  3. Remote video radioactive systems evaluation, Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Heckendorn, F.M.; Robinson, C.W.

    1991-12-31

    Specialized miniature low cost video equipment has been effectively used in a number of remote, radioactive, and contaminated environments at the Savannah River Site (SRS). The equipment and related techniques have reduced the potential for personnel exposure to both radiation and physical hazards. The valuable process information thus provided would not have otherwise been available for use in improving the quality of operation at SRS.

  4. Manufacturing fuel-switching capability, 1988

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs.

  5. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... a Group Upcoming Events Video Library Photo Gallery One-on-One Support ANetwork Peer Support Program Community Connections Overview ... group Back Upcoming events Video Library Photo Gallery One-on-One Support Back ANetwork Peer Support Program ...

  6. Reviews in instructional video

    NARCIS (Netherlands)

    van der Meij, Hans

    2017-01-01

    This study investigates the effectiveness of a video tutorial for software training whose construction was based on a combination of insights from multimedia learning and Demonstration-Based Training. In the videos, a model of task performance was enhanced with instructional features that were

  7. Digital Video Editing

    Science.gov (United States)

    McConnell, Terry

    2004-01-01

    Monica Adams, head librarian at Robinson Secondary in Fairfax country, Virginia, states that librarians should have the technical knowledge to support projects related to digital video editing. The process of digital video editing and the cables, storage issues and the computer system with software is described.

  8. AudioMove Video

    DEFF Research Database (Denmark)

    2012-01-01

    Live drawing video experimenting with low tech techniques in the field of sketching and visual sense making. In collaboration with Rune Wehner and Teater Katapult.......Live drawing video experimenting with low tech techniques in the field of sketching and visual sense making. In collaboration with Rune Wehner and Teater Katapult....

  9. Making Good Physics Videos

    Science.gov (United States)

    Lincoln, James

    2017-01-01

    Online videos are an increasingly important way technology is contributing to the improvement of physics teaching. Students and teachers have begun to rely on online videos to provide them with content knowledge and instructional strategies. Online audiences are expecting greater production value, and departments are sometimes requesting educators…

  10. SECRETS OF SONG VIDEO

    Directory of Open Access Journals (Sweden)

    Chernyshov Alexander V.

    2014-04-01

    Full Text Available The article focuses on the origins of the song videos as TV and Internet-genre. In addition, it considers problems of screen images creation depending on the musical form and the text of a songs in connection with relevant principles of accent and phraseological video editing and filming techniques as well as with additional frames and sound elements.

  11. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... support group for me? Find a Group Upcoming Events Video Library Photo Gallery One-on-One Support ANetwork Peer ... group for me? Find a group Back Upcoming events Video Library Photo Gallery One-on-One Support Back ANetwork ...

  12. Personal Digital Video Stories

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Henningsen, Birgitte Sølbeck; Louw, Arnt Vestergaard

    2016-01-01

    agenda focusing on video productions in combination with digital storytelling, followed by a presentation of the digital storytelling features. The paper concludes with a suggestion to initiate research in what is identified as Personal Digital Video (PDV) Stories within longitudinal settings, while...

  13. The Video Generation.

    Science.gov (United States)

    Provenzo, Eugene F., Jr.

    1992-01-01

    Video games are neither neutral nor harmless but represent very specific social and symbolic constructs. Research on the social content of today's video games reveals that sex bias and gender stereotyping are widely evident throughout the Nintendo games. Violence and aggression also pervade the great majority of the games. (MLF)

  14. Low Cost Lithography Tool for High Brightness LED Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Andrew Hawryluk; Emily True

    2012-06-30

    The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

  15. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... member of our patient care team. Managing Your Arthritis Managing Your Arthritis Managing Chronic Pain and Depression ...

  16. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos was designed to help you learn more about Rheumatoid Arthritis (RA). You will learn how the diagnosis of ...

  17. Rheumatoid Arthritis Educational Video Series

    Science.gov (United States)

    ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos was designed to help you learn more about Rheumatoid Arthritis (RA). You will learn how the diagnosis of ...

  18. NEI You Tube Videos: Amblyopia

    Medline Plus

    Full Text Available ... questions Clinical Studies Publications Catalog Photos and Images Spanish Language Information Grants and Funding Extramural Research Division ... Low Vision Refractive Errors Retinopathy of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video ...

  19. Photovoltaic industry manufacturing technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

    1998-08-01

    This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

  20. Social video content delivery

    CERN Document Server

    Wang, Zhi; Zhu, Wenwu

    2016-01-01

    This brief presents new architecture and strategies for distribution of social video content. A primary framework for socially-aware video delivery and a thorough overview of the possible approaches is provided. The book identifies the unique characteristics of socially-aware video access and social content propagation, revealing the design and integration of individual modules that are aimed at enhancing user experience in the social network context. The change in video content generation, propagation, and consumption for online social networks, has significantly challenged the traditional video delivery paradigm. Given the massive amount of user-generated content shared in online social networks, users are now engaged as active participants in the social ecosystem rather than as passive receivers of media content. This revolution is being driven further by the deep penetration of 3G/4G wireless networks and smart mobile devices that are seamlessly integrated with online social networking and media-sharing s...

  1. Manufacturing in Denmark

    DEFF Research Database (Denmark)

    Hansen, Johannes; Boer, Henrike Engele Elisabeth; Boer, Harry

    This report compares the manufacturing strategies, practices, performances and improvement activities of 39 companies that are representative for the Danish assembly industry with those of 804 companies from 19 other countries. The data supporting this report were collected in 2013 and concern......: • Manufacturing strategies pursued and implemented between 2010 and 2012. • Performance improvements achieved during that period. • Actual manufacturing practices and performances as well as competitive priorities in 2012. • Manufacturing strategies pursued for the years 2010-2012....

  2. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  3. [Medical Equipment Maintenance Methods].

    Science.gov (United States)

    Liu, Hongbin

    2015-09-01

    Due to the high technology and the complexity of medical equipment, as well as to the safety and effectiveness, it determines the high requirements of the medical equipment maintenance work. This paper introduces some basic methods of medical instrument maintenance, including fault tree analysis, node method and exclusive method which are the three important methods in the medical equipment maintenance, through using these three methods for the instruments that have circuit drawings, hardware breakdown maintenance can be done easily. And this paper introduces the processing methods of some special fault conditions, in order to reduce little detours in meeting the same problems. Learning is very important for stuff just engaged in this area.

  4. Performance Measurement of Mining Equipments by Utilizing OEE

    Directory of Open Access Journals (Sweden)

    Sermin Elevli

    2010-10-01

    Full Text Available Over the past century, open pit mines have steadily increased their production rate by using larger equipments which requireintensive capital investment. Low commodity prices have forced companies to decrease their unit cost by improving productivity. Oneway to improve productivity is to utilize equipment as effectively as possible. Therefore, the accurate estimation of equipmenteffectiveness is very important so that it can be increased. Overall Equipment Effectiveness (OEE is a well-known measurementmethod, which combines availability, performance and quality, for the evaluation of equipment effectiveness in manufacturing industry.However, there isn’t any study in literature about how to use this metric for mining equipments such as shovel, truck, drilling machineetc. This paper will discuss the application of OEE to measure effectiveness of mining equipment. It identifies causes of time losses forshovel and truck operations and introduces procedure to record time losses. The procedure to estimate OEE of shovels and trucks hasalso been presented via numerical example.

  5. Micro/Nano manufacturing

    DEFF Research Database (Denmark)

    Tosello, Guido

    2017-01-01

    Micro- and nano-scale manufacturing has been the subject of an increasing amount of interest and research effort worldwide in both academia and industry over the past 10 years.Traditional (MEMS) manufacturing, but also precision manufacturing technologies have been developed to cover micro...

  6. High Pressure Processing Technology and Equipment Evolution: A Review

    Directory of Open Access Journals (Sweden)

    Wael M. Elamin

    2015-12-01

    Full Text Available High pressure processing (HPP is an interesting non-thermal technology that involves the sterilization of food by the mean of ultra-high pressures, which lead to extending the shelf life of processed food, as well as maintaining nutritional value and quality of food products. The consumers’ increasing demand for this new products graped the interest of several already-existing high pressure equipment manufacturers around the globe. The successful of this technology encouraged them to enter the field of food processing and adjust their existing technologies to adapt to the new process. This review spots the major discoveries in HPP equipment history, describes the current applications of HHP in processing and provides comprehensive information about HPP equipment technology used in commercial and research applications. In addition, this paper presents the major manufacturers in HPP equipment industry around the world.

  7. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  8. Advanced Manufacturing Technologies (AMT): Manufacturing Initiative Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA supports the Advanced Manufacturing National Program Office (AMNPO). Hosted by the National Institute of Standards and Technology (NIST) the AMNPO is...

  9. Developing the Manufacturing Process for Hylene MP Curing Agent

    Energy Technology Data Exchange (ETDEWEB)

    Eastwood, Eric

    2009-02-16

    This report details efforts to scale-up and re-establish the manufacturing process for the curing agent known as Hylene MP. First, small scale reactions were completed with varying conditions to determine key drivers for yielding high quality product. Once the optimum conditions were determined on the small scale, the scaled-up process conditions were determined. New equipment was incorporated into the manufacturing process to create a closed production system and improve chemical exposure controls and improve worker safety. A safe, efficient manufacturing process was developed to manufacture high quality Hylene MP in large quantities.

  10. Acceptance tests for radiological equipment; Testes de aceitacao em equipamentos de radiologia

    Energy Technology Data Exchange (ETDEWEB)

    Uhr, A.P.; Mazzola, A.A.; Bacelar, A. [Pontificia Univ. Catolica do Rio Grande do Sul, Porto Alegre, RS (Brazil). Inst. de Fisica; Sanvitto, P.C.; Thiesen, V.L.P. [Hospital Moinhos de Vento, Porto Alegre, RS (Brazil). Centro de Imagem

    1996-12-31

    Acceptance tests for radiological equipment are performed. Technical patterns are established for 10 new equipment from 2 different institutions. Several aspects are considered such as effective electric potential, exposure time, X-ray beams alignment. Considering the difference between the equipment (model, manufacturer, etc) some specific charts to check all the items are used. The study will permit further analytical evaluation during the useful life of the equipment 3 refs., 4 tabs.

  11. Manufacturer Identification Code (MID) - ACE

    Data.gov (United States)

    Department of Homeland Security — The ACE Manufacturer Identification Code (MID) application is used to track and control identifications codes for manufacturers. A manufacturer is identified on an...

  12. Manufacturing Planning Guide

    Science.gov (United States)

    Waid, Michael

    2011-01-01

    Manufacturing process, milestones and inputs are unknowns to first-time users of the manufacturing facilities. The Manufacturing Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their project engineering personnel in manufacturing planning and execution. Material covered includes a roadmap of the manufacturing process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, products, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  13. Ergonomic evaluation of pressurized irrigation equipment factotry operators using an easy posture assessment

    Directory of Open Access Journals (Sweden)

    Sajjad Deyhim

    2016-09-01

    Full Text Available introduction: One of the most common causes of occupational injuries in industrialized and developing countries is musculoskeletal disorders Determining the risk factors of musculoskeletal disorders can be helpful choosing the right method for interventions and detailed studies. This study aimed to evaluate the ergonomic risk factors in operators of pressurized irrigation equipment factory. Materials and Methods: This cross-sectional study was conducted in a pressurized irrigation equipment manufacturing company. In this study, a new method based on observation was used to evaluate the ergonomic aspects of operator's activity. In order to assign tasks and sub-tasks, direct observation and video recording equipment were used. Ergonomic assessment was carried out on all sub-tasks identified. then, the criticality of the task determined. Results: Among the tasks identified 53 very critical posture 61 critical and 82 low critical posture was determined. Ergonomic point in the ball valve production line was 0.6 and 0.68 respectively for tow operator. For drop valve and automatic valve production line's ergonomic point was 0.52 and 0.67 respectively. Conclusion: According to the results, posture analysis method used in this study is easy and accurate. The advantage of this method is 14 ergonomic domaines that covered whole body and time fragment of each task. Findings of previous studies showed good correlation between results from this method and OCRA method. In this study, The most critical posture was related to operator's wrist, so it is recommended that control measures on wrist posture correction should be considered.

  14. A new video programme

    CERN Multimedia

    CERN video productions

    2011-01-01

    "What's new @ CERN?", a new monthly video programme, will be broadcast on the Monday of every month on webcast.cern.ch. Aimed at the general public, the programme will cover the latest CERN news, with guests and explanatory features. Tune in on Monday 3 October at 4 pm (CET) to see the programme in English, and then at 4:20 pm (CET) for the French version.   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-posterframe-640x360-at-10-percent.jpg', '1383406', true, 'Video/Public/Movies/2011/CERN-MOVIE-2011-129/CERN-MOVIE-2011-129-0600-kbps-maxH-360-25-fps-...

  15. Gamifying Video Object Segmentation.

    Science.gov (United States)

    Spampinato, Concetto; Palazzo, Simone; Giordano, Daniela

    2017-10-01

    Video object segmentation can be considered as one of the most challenging computer vision problems. Indeed, so far, no existing solution is able to effectively deal with the peculiarities of real-world videos, especially in cases of articulated motion and object occlusions; limitations that appear more evident when we compare the performance of automated methods with the human one. However, manually segmenting objects in videos is largely impractical as it requires a lot of time and concentration. To address this problem, in this paper we propose an interactive video object segmentation method, which exploits, on one hand, the capability of humans to identify correctly objects in visual scenes, and on the other hand, the collective human brainpower to solve challenging and large-scale tasks. In particular, our method relies on a game with a purpose to collect human inputs on object locations, followed by an accurate segmentation phase achieved by optimizing an energy function encoding spatial and temporal constraints between object regions as well as human-provided location priors. Performance analysis carried out on complex video benchmarks, and exploiting data provided by over 60 users, demonstrated that our method shows a better trade-off between annotation times and segmentation accuracy than interactive video annotation and automated video object segmentation approaches.

  16. Interactive video algorithms and technologies

    CERN Document Server

    Hammoud, Riad

    2006-01-01

    This book covers both algorithms and technologies of interactive videos, so that businesses in IT and data managements, scientists and software engineers in video processing and computer vision, coaches and instructors that use video technology in teaching, and finally end-users will greatly benefit from it. This book contains excellent scientific contributions made by a number of pioneering scientists and experts from around the globe. It consists of five parts. The first part introduces the reader to interactive video and video summarization and presents effective methodologies for automatic abstraction of a single video sequence, a set of video sequences, and a combined audio-video sequence. In the second part, a list of advanced algorithms and methodologies for automatic and semi-automatic analysis and editing of audio-video documents are presented. The third part tackles a more challenging level of automatic video re-structuring, filtering of video stream by extracting of highlights, events, and meaningf...

  17. Popular video for rural development in Peru.

    Science.gov (United States)

    Calvelo Rios, J M

    1989-01-01

    Peru developed its first use of video for training and education in rural areas over a decade ago. On completion of the project in 1986, over 400,000 peasants had attended video courses lasting from 5-20 days. The courses included rural health, family planning, reforestation, agriculture, animal husbandry, housing, nutrition, and water sanitation. There were 125 course packages made and 1,260 video programs from 10-18 minutes in length. There were 780 additional video programs created on human resource development, socioeconomic diagnostics and culture. 160 specialists were trained to produce audiovisual materials and run the programs. Also, 70 trainers from other countries were trained. The results showed many used the training in practical applications. To promote rural development 2 things are needed , capital and physical inputs, such as equipment, fertilizers, pesticides, etc. The video project provided peasants an additional input that would help them manage the financial and physical inputs more efficiently. Video was used because many farmers are illiterate or speak a language different from the official one. Printed guides that contained many illustrations and few words served as memory aids and group discussions reinforced practical learning. By seeing, hearing, and doing, the training was effective. There were 46% women which made fertility and family planning subjects more easily communicated. The production of teaching modules included field investigations, academic research, field recording, tape editing, and experimental application in the field. An agreement with the peasants was initiated before a course began to help insure full participation and to also make sure resources were available to use the knowledge gained. The courses were limited to 30 and the cost per participant was $34 per course.

  18. Categorizing Video Game Audio

    DEFF Research Database (Denmark)

    Westerberg, Andreas Rytter; Schoenau-Fog, Henrik

    2015-01-01

    This paper dives into the subject of video game audio and how it can be categorized in order to deliver a message to a player in the most precise way. A new categorization, with a new take on the diegetic spaces, can be used a tool of inspiration for sound- and game-designers to rethink how...... they can use audio in video games. The conclusion of this study is that the current models' view of the diegetic spaces, used to categorize video game audio, is not t to categorize all sounds. This can however possibly be changed though a rethinking of how the player interprets audio....

  19. Brains on video games

    OpenAIRE

    Bavelier, Daphne; Green, C. Shawn; Han, Doug Hyun; Renshaw, Perry F.; Merzenich, Michael M.; Gentile, Douglas A.

    2011-01-01

    The popular press is replete with stories about the effects of video and computer games on the brain. Sensationalist headlines claiming that video games ‘damage the brain’ or ‘boost brain power’ do not do justice to the complexities and limitations of the studies involved, and create a confusing overall picture about the effects of gaming on the brain. Here, six experts in the field shed light on our current understanding of the positive and negative ways in which playing video games can affe...

  20. High Dynamic Range Video

    CERN Document Server

    Myszkowski, Karol

    2008-01-01

    This book presents a complete pipeline forHDR image and video processing fromacquisition, through compression and quality evaluation, to display. At the HDR image and video acquisition stage specialized HDR sensors or multi-exposure techniques suitable for traditional cameras are discussed. Then, we present a practical solution for pixel values calibration in terms of photometric or radiometric quantities, which are required in some technically oriented applications. Also, we cover the problem of efficient image and video compression and encoding either for storage or transmission purposes, in

  1. 3D video

    CERN Document Server

    Lucas, Laurent; Loscos, Céline

    2013-01-01

    While 3D vision has existed for many years, the use of 3D cameras and video-based modeling by the film industry has induced an explosion of interest for 3D acquisition technology, 3D content and 3D displays. As such, 3D video has become one of the new technology trends of this century.The chapters in this book cover a large spectrum of areas connected to 3D video, which are presented both theoretically and technologically, while taking into account both physiological and perceptual aspects. Stepping away from traditional 3D vision, the authors, all currently involved in these areas, provide th

  2. Social Backup and Sharing of Video using HTTP Adaptive Streaming

    NARCIS (Netherlands)

    Stokking, H.M.; Klos, V.B.; Jiang, J.; Casetti, C.

    2013-01-01

    This paper is on social backup, sharing and remote access of video using HTTP Adaptive Streaming. A social backup is a backup at the location, and thus on the equipment, of (close) friends and family. Backups are created at friends’ locations, matching the hosting user’s interest with the content

  3. Visual Acuity and Contrast Sensitivity with compressed motion video

    NARCIS (Netherlands)

    Bijl, P.; Vries, S.C. de

    2009-01-01

    Video of Visual Acuity (VA) and Contrast Sensitivity (CS) test charts in a complex background was recorded using a CCD camera mounted on a computer-controlled tripod and fed into real-time MPEG2 compression/decompression equipment. The test charts were based on the Triangle Orientation

  4. Business factors related to manufacturing firms' performance

    Directory of Open Access Journals (Sweden)

    Stergios Vranakis

    2014-01-01

    Full Text Available Purpose: The main goal is to understand the way many factors affect the investment decision making process and business performance. Design/methodology/approach: This study proposes a new conceptual framework for examining the reasons that manufacturing firms decide to invest on the acquisition of new machinery and equipment in order to improve their infrastructure. It incorporates various factors related to the internal business environment (quality management, investment decisions etc. Findings and Originality/value: A new conceptual framework, establishing the relations between many factors, has been developed, allowing the determinants of adoption of many implications to be discussed and to relate them to the peculiarities of the Greek manufacturing industry. Originality/value: This study presents an overview of the impact of machinery and equipment investment on firm’s performance, giving grasp for further research of the inter-organizational relationships that exist between them. 

  5. Manufactured Home Energy Audit user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the US Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA displays a colorful, graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes.

  6. EPA’s Response Equipment

    Science.gov (United States)

    EPA maintains a variety of equipment to respond to hazardous substance emergencies such as releases or oil spills regardless of their nature, size, or location. This include ASPECT, PHILIS, Equipment Module (EM), and personal protective equipment.

  7. Prioritizing equipment for replacement.

    Science.gov (United States)

    Capuano, Mike

    2010-01-01

    It is suggested that clinical engineers take the lead in formulating evaluation processes to recommend equipment replacement. Their skill, knowledge, and experience, combined with access to equipment databases, make them a logical choice. Based on ideas from Fennigkoh's scheme, elements such as age, vendor support, accumulated maintenance cost, and function/risk were used.6 Other more subjective criteria such as cost benefits and efficacy of newer technology were not used. The element of downtime was also omitted due to the data element not being available. The resulting Periop Master Equipment List and its rationale was presented to the Perioperative Services Program Council. They deemed the criteria to be robust and provided overwhelming acceptance of the list. It was quickly put to use to estimate required capital funding, justify items already thought to need replacement, and identify high-priority ranked items for replacement. Incorporating prioritization criteria into an existing equipment database would be ideal. Some commercially available systems do have the basic elements of this. Maintaining replacement data can be labor-intensive regardless of the method used. There is usually little time to perform the tasks necessary for prioritizing equipment. However, where appropriate, a clinical engineering department might be able to conduct such an exercise as shown in the following case study.

  8. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... Care Disease Types FAQ Handout for Patients and Families Is It Right for You How to Get ... For the Media For Clinicians For Policymakers For Family Caregivers Glossary Menu In this section Links Videos ...

  9. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... Donate Search Search What Is It Definition Pediatric Palliative Care Disease Types FAQ Handout for Patients and Families ... Policymakers For Family Caregivers Glossary Resources Browse our palliative care resources below: Links Videos Podcasts Webinars For the ...

  10. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Click to learn more... LOGIN CALENDAR DONATE NEWS Home Learn Back Learn about acoustic neuroma AN Facts ... Vision & Values Leadership & Staff Annual Reports Shop ANA Home Learn Educational Video Ronson and Kerri Albany Support ...

  11. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... Donate Search Search What Is It Definition Pediatric Palliative Care Disease Types FAQ Handout for Patients and ... Policymakers For Family Caregivers Glossary Resources Browse our palliative care resources below: Links Videos Podcasts Webinars For ...

  12. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Click to learn more... LOGIN CALENDAR DONATE NEWS Home Learn Back Learn about acoustic neuroma AN Facts ... Vision & Values Leadership & Staff Annual Reports Shop ANA Home Learn Educational Video Howard of NJ Gloria hiking ...

  13. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Mission, Vision & Values Shop ANA Leadership & Staff Annual Reports Acoustic Neuroma Association 600 Peachtree Parkway Suite 108 ... About ANA Mission, Vision & Values Leadership & Staff Annual Reports Shop ANA Home Learn Educational Video English English ...

  14. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... Disease Types Stories FAQ Handout for Patients and Families Is It Right for You How to Get ... For the Media For Clinicians For Policymakers For Family Caregivers Glossary Menu In this section Links Videos ...

  15. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... Search Search What Is It Definition Pediatric Palliative Care Disease Types FAQ Handout for Patients and Families ... For Family Caregivers Glossary Resources Browse our palliative care resources below: Links Videos Podcasts Webinars For the ...

  16. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Educational Video Scott at the Grand Canyon Proton Center load more hold SHIFT key to load all load all Stay Connected with ANA Newly Diagnosed Living with AN Healthcare Providers Acoustic Neuroma Association Donate Now Newly Diagnosed ...

  17. The video violence debate.

    Science.gov (United States)

    Lande, R G

    1993-04-01

    Some researchers and theorists are convinced that graphic scenes of violence on television and in movies are inextricably linked to human aggression. Others insist that a link has not been conclusively established. This paper summarizes scientific studies that have informed these two perspectives. Although many instances of children and adults imitating video violence have been documented, no court has imposed liability for harm allegedly resulting from a video program, an indication that considerable doubt still exists about the role of video violence in stimulating human aggression. The author suggests that a small group of vulnerable viewers are probably more impressionable and therefore more likely to suffer deleterious effects from violent programming. He proposes that research on video violence be narrowed to identifying and describing the vulnerable viewer.

  18. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... a patient kit Keywords Join/Renew Programs Back Support Groups Is a support group for me? Find ... Events Video Library Photo Gallery One-on-One Support ANetwork Peer Support Program Community Connections Overview Find ...

  19. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Click to learn more... LOGIN CALENDAR DONATE NEWS Home Learn Back Learn about acoustic neuroma AN Facts ... Vision & Values Leadership & Staff Annual Reports Shop ANA Home Learn Educational Video English English Arabic Catalan Chinese ( ...

  20. Video i VIA

    DEFF Research Database (Denmark)

    2012-01-01

    Artiklen beskriver et udviklingsprojekt, hvor 13 grupper af lærere på tværs af fag og uddannelser producerede video til undervsioningsbrug. Der beskrives forskellige tilgange og anvendelser samt læringen i projektet...

  1. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... to your Doctor Find a Provider Meet the Team Blog Articles & Stories News Resources Links Videos Podcasts ... to your Doctor Find a Provider Meet the Team Blog Articles & Stories News Provider Directory Donate Resources ...

  2. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Click to learn more... LOGIN CALENDAR DONATE NEWS Home Learn Back Learn about acoustic neuroma AN Facts ... Vision & Values Leadership & Staff Annual Reports Shop ANA Home Learn Educational Video Keck Medicine of USC ANWarriors ...

  3. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... illness: Toby’s palliative care story Access the Provider Directory Handout for Patients and Families Is it Right ... Provider Meet the Team Blog Articles News Provider Directory Donate Resources Links Videos Podcasts Webinars For the ...

  4. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Click to learn more... LOGIN EVENTS DONATE NEWS Home Learn Back Learn about acoustic neuroma AN Facts ... Vision & Values Leadership & Staff Annual Reports Shop ANA Home Learn Educational Video Scott at the Grand Canyon ...

  5. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Is a support group for me? Find a Group Upcoming Events Video Library Photo Gallery One-on-One Support ANetwork Peer Support Program Community Connections Overview Find a Meeting ...

  6. Photos and Videos

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Observers are required to take photos and/or videos of all incidentally caught sea turtles, marine mammals, seabirds and unusual or rare fish. On the first 3...

  7. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... All rights reserved. GetPalliativeCare.org does not provide medical advice, diagnosis or treatment. ... the Team Blog Articles & Stories News Provider Directory Donate Resources Links Videos ...

  8. SEFIS Video Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This is a fishery-independent survey that collects data on reef fish in southeast US waters using multiple gears, including chevron traps, video cameras, ROVs,...

  9. NEI You Tube Videos: Amblyopia

    Medline Plus

    Full Text Available ... search for current job openings visit HHS USAJobs Home > NEI YouTube Videos > NEI YouTube Videos: Amblyopia NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration Amblyopia Animations Blindness Cataract ...

  10. NEI You Tube Videos: Amblyopia

    Medline Plus

    Full Text Available ... Amaurosis Low Vision Refractive Errors Retinopathy of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video for NEI YouTube Videos: Amblyopia NEI Home Contact Us A-Z Site Map NEI on Social Media Information in Spanish (Información en español) Website, ...

  11. 36 CFR 1254.88 - What are the rules for the Motion Picture, Sound, and Video Research Room at the National...

    Science.gov (United States)

    2010-07-01

    ... Motion Picture, Sound, and Video Research Room at the National Archives at College Park? 1254.88 Section... to Using Copying Equipment § 1254.88 What are the rules for the Motion Picture, Sound, and Video.... (c) We provide you with a copy of the Motion Picture, Sound, and Video Research Room rules and a...

  12. Studenterproduceret video til eksamen

    DEFF Research Database (Denmark)

    Jensen, Kristian Nøhr; Hansen, Kenneth

    2016-01-01

    Formålet med denne artikel er at vise, hvordan læringsdesign og stilladsering kan anvendes til at skabe en ramme for studenterproduceret video til eksamen på videregående uddannelser. Artiklen tager udgangspunkt i en problemstilling, hvor uddannelsesinstitutionerne skal håndtere og koordinere...... de fagfaglige og mediefaglige undervisere et redskab til at fokusere og koordinere indsatsen frem mod målet med, at de studerende producerer og anvender video til eksamen....

  13. Video Editing System

    Science.gov (United States)

    Schlecht, Leslie E.; Kutler, Paul (Technical Monitor)

    1998-01-01

    This is a proposal for a general use system based, on the SGI IRIS workstation platform, for recording computer animation to videotape. In addition, this system would provide features for simple editing and enhancement. Described here are a list of requirements for the system, and a proposed configuration including the SGI VideoLab Integrator, VideoMedia VLAN animation controller and the Pioneer rewritable laserdisc recorder.

  14. Video Games and Citizenship

    OpenAIRE

    Bourgonjon, Jeroen; Soetaert, Ronald

    2013-01-01

    In their article "Video Games and Citizenship" Jeroen Bourgonjon and Ronald Soetaert argue that digitization problematizes and broadens our perspective on culture and popular media, and that this has important ramifications for our understanding of citizenship. Bourgonjon and Soetaert respond to the call of Gert Biesta for the contextualized study of young people's practices by exploring a particular aspect of digitization that affects young people, namely video games. They explore the new so...

  15. Android Video Streaming

    Science.gov (United States)

    2014-05-01

    be processed by a nearby high -performance computing asset and returned to a squad of Soldiers with annotations indicating the location of friendly and...is to change the resolution, bitrate, and/or framerate of the video being transmitted to the client, reducing the bandwidth requirements of the...video. This solution is typically not viable because a progressive download is required to have a constant resolution, bitrate, and framerate because

  16. Robust Adaptable Video Copy Detection

    DEFF Research Database (Denmark)

    Assent, Ira; Kremer, Hardy

    2009-01-01

    Video copy detection should be capable of identifying video copies subject to alterations e.g. in video contrast or frame rates. We propose a video copy detection scheme that allows for adaptable detection of videos that are altered temporally (e.g. frame rate change) and/or visually (e.g. change...... in contrast). Our query processing combines filtering and indexing structures for efficient multistep computation of video copies under this model. We show that our model successfully identifies altered video copies and does so more reliably than existing models....

  17. Robust video object cosegmentation.

    Science.gov (United States)

    Wang, Wenguan; Shen, Jianbing; Li, Xuelong; Porikli, Fatih

    2015-10-01

    With ever-increasing volumes of video data, automatic extraction of salient object regions became even more significant for visual analytic solutions. This surge has also opened up opportunities for taking advantage of collective cues encapsulated in multiple videos in a cooperative manner. However, it also brings up major challenges, such as handling of drastic appearance, motion pattern, and pose variations, of foreground objects as well as indiscriminate backgrounds. Here, we present a cosegmentation framework to discover and segment out common object regions across multiple frames and multiple videos in a joint fashion. We incorporate three types of cues, i.e., intraframe saliency, interframe consistency, and across-video similarity into an energy optimization framework that does not make restrictive assumptions on foreground appearance and motion model, and does not require objects to be visible in all frames. We also introduce a spatio-temporal scale-invariant feature transform (SIFT) flow descriptor to integrate across-video correspondence from the conventional SIFT-flow into interframe motion flow from optical flow. This novel spatio-temporal SIFT flow generates reliable estimations of common foregrounds over the entire video data set. Experimental results show that our method outperforms the state-of-the-art on a new extensive data set (ViCoSeg).

  18. FAS: equipment with PED and ATEX EC-Certificates; FAS: equipements CE au titre de la DESP et de l'ATEX

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2004-04-15

    Since 1975 the company FAS Flussiggas-Anlagen GmbH, Salzgitter Germany, is one of the leading manufacturers of LPG equipment and components for mobile and stationary bulk plants in Europe. The main products are dispensers, Autogas filling stations, vaporizers, loading arms, electronic cylinder filling scales, flanged valves and safety equipment. (authors)

  19. Measuring Manufacturing Innovativeness

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    2017-01-01

    technology and organizational concepts. Based on Danish survey data from the European Manufacturing Survey (EMS-2015) this paper finds that there is a relation between innovative companies, and their level of technology and use of organizational concepts. Technology and organizational concepts act...... as manufacturing levers to support the manufacturing and production system to provide innovativeness. The managerial implication lies in building manufacturing capabilities to support the innovative process, by standardization, optimization and creating stability in combination with automation and advanced......Globalization and customization increases the pressure on manufacturing companies, and the ability to provide innovativeness is a potential source of competitive advantage. This paper positions the manufacturing entity in the innovation process, and investigates the relation between innovation vers...

  20. Optimized manufacturable porous materials

    DEFF Research Database (Denmark)

    Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard

    to include manufacturing constraints in the optimization. This work focuses on incorporating the manufacturability into the optimization procedure, allowing the resulting material structure to be manufactured directly using rapid manufacturing techniques, such as selective laser melting/sintering (SLM....../S). The available manufacturing methods are best suited for porous materials (one constituent and void), but the optimization procedure can easily include more constituents. The elasticity tensor is found from one unit cell using the homogenization method together with a standard finite element (FE) discretization....... The distribution of the material in the unit cell is optimized according to a given objective (e.g. maximum bulk modulus or minimum Poisson’s ratio) and some given constraints (e.g. isotropy) using topology optimization. The manufacturability is achieved using various filtering techniques together...

  1. Wind Turbine Manufacturing Process Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Waseem Faidi; Chris Nafis; Shatil Sinha; Chandra Yerramalli; Anthony Waas; Suresh Advani; John Gangloff; Pavel Simacek

    2012-04-26

    To develop a practical inline inspection that could be used in combination with automated composite material placement equipment to economically manufacture high performance and reliable carbon composite wind turbine blade spar caps. The approach technical feasibility and cost benefit will be assessed to provide a solid basis for further development and implementation in the wind turbine industry. The program is focused on the following technology development: (1) Develop in-line monitoring methods, using optical metrology and ultrasound inspection, and perform a demonstration in the lab. This includes development of the approach and performing appropriate demonstration in the lab; (2) Develop methods to predict composite strength reduction due to defects; and (3) Develop process models to predict defects from leading indicators found in the uncured composites.

  2. Surrogate Final Technical Report for "Solar: A Photovoltaic Manufacturing Development Facility"

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, Paul [State University of New York Research Foundation, Albany, NY (United States)

    2014-06-27

    The project goal to create a first-of-a-kind crystalline Silicon (c-Si) photovoltaic (PV) Manufacturing & Technology Development Facility (MDF) that will support the growth and maturation of a strong domestic PV manufacturing industry, based on innovative and differentiated technology, by ensuring industry participants can, in a timely and cost-effective manner, access cutting-edge manufacturing equipment and production expertise needed to accelerate the transition of innovative technologies from R&D into manufacturing.

  3. Rapid manufacturing facilitated customisation

    OpenAIRE

    Tuck, Christopher John; Hague, Richard; Ruffo, Massimiliano; Ransley, Michelle; Adams, Paul Russell

    2008-01-01

    Abstract This paper describes the production of body-fitting customised seat profiles utilising the following digital methods: three dimensional laser scanning, reverse engineering and Rapid Manufacturing (RM). The seat profiles have been manufactured in order to influence the comfort characteristics of an existing ejector seat manufactured by Martin Baker Aircraft Ltd. The seat, known as Navy Aircrew Common Ejection Seat (NACES), was originally designed with a generic profile. ...

  4. Manufacturing tolerant topology optimization

    OpenAIRE

    Sigmund, Ole

    2009-01-01

    In this paper we present an extension of the topology optimization method to include uncertainties during the fabrication of macro, micro and nano structures. More specifically, we consider devices that are manufactured using processes which may result in (uniformly) too thin (eroded) or too thick (dilated) structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining an...

  5. Performance measurement integrated information framework in e-Manufacturing

    Science.gov (United States)

    Teran, Hilaida; Hernandez, Juan Carlos; Vizán, Antonio; Ríos, José

    2014-11-01

    The implementation of Internet technologies has led to e-Manufacturing technologies becoming more widely used and to the development of tools for compiling, transforming and synchronising manufacturing data through the Web. In this context, a potential area for development is the extension of virtual manufacturing to performance measurement (PM) processes, a critical area for decision making and implementing improvement actions in manufacturing. This paper proposes a PM information framework to integrate decision support systems in e-Manufacturing. Specifically, the proposed framework offers a homogeneous PM information exchange model that can be applied through decision support in e-Manufacturing environment. Its application improves the necessary interoperability in decision-making data processing tasks. It comprises three sub-systems: a data model, a PM information platform and PM-Web services architecture. A practical example of data exchange for measurement processes in the area of equipment maintenance is shown to demonstrate the utility of the model.

  6. Video change detection for fixed wing UAVs

    Science.gov (United States)

    Bartelsen, Jan; Müller, Thomas; Ring, Jochen; Mück, Klaus; Brüstle, Stefan; Erdnüß, Bastian; Lutz, Bastian; Herbst, Theresa

    2017-10-01

    In this paper we proceed the work of Bartelsen et al.1 We present the draft of a process chain for an image based change detection which is designed for videos acquired by fixed wing unmanned aerial vehicles (UAVs). From our point of view, automatic video change detection for aerial images can be useful to recognize functional activities which are typically caused by the deployment of improvised explosive devices (IEDs), e.g. excavations, skid marks, footprints, left-behind tooling equipment, and marker stones. Furthermore, in case of natural disasters, like flooding, imminent danger can be recognized quickly. Due to the necessary flight range, we concentrate on fixed wing UAVs. Automatic change detection can be reduced to a comparatively simple photogrammetric problem when the perspective change between the "before" and "after" image sets is kept as small as possible. Therefore, the aerial image acquisition demands a mission planning with a clear purpose including flight path and sensor configuration. While the latter can be enabled simply by a fixed and meaningful adjustment of the camera, ensuring a small perspective change for "before" and "after" videos acquired by fixed wing UAVs is a challenging problem. Concerning this matter, we have performed tests with an advanced commercial off the shelf (COTS) system which comprises a differential GPS and autopilot system estimating the repetition accuracy of its trajectory. Although several similar approaches have been presented,23 as far as we are able to judge, the limits for this important issue are not estimated so far. Furthermore, we design a process chain to enable the practical utilization of video change detection. It consists of a front-end of a database to handle large amounts of video data, an image processing and change detection implementation, and the visualization of the results. We apply our process chain on the real video data acquired by the advanced COTS fixed wing UAV and synthetic data. For the

  7. Manufacturing with the Sun

    Science.gov (United States)

    Murphy, L. M.; Hauser, S. G.; Clyne, R. J.

    1992-05-01

    Concentrated solar radiation is now a viable alternative energy source for many advanced manufacturing processes. Researchers at the National Renewable Energy Laboratory (NREL) have demonstrated the feasibility of processes such as solar-induced surface transformation of materials (SISTM), solar-based manufacturing, and solar-pumped lasers. Researchers are also using sunlight to decontaminate water and soils polluted with organic compounds; these techniques could provide manufacturers with innovative alternatives to traditional methods of waste management. The solar technology that is now being integrated into today's manufacturing processes offers even greater potential for tomorrow, especially as applied to the radiation-abundant environment available in space and on the lunar surface.

  8. Composite Structures Manufacturing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Composite Structures Manufacturing Facility specializes in the design, analysis, fabrication and testing of advanced composite structures and materials for both...

  9. Advanced Manufacturing Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Manufacturing Laboratory at the University of Maryland provides the state of the art facilities for realizing next generation products and educating the...

  10. Manufacturing Demonstration Facility (MDF)

    Data.gov (United States)

    Federal Laboratory Consortium — The U.S. Department of Energy Manufacturing Demonstration Facility (MDF) at Oak Ridge National Laboratory (ORNL) provides a collaborative, shared infrastructure to...

  11. Optymisation of equipment setup processes in enterprises

    Directory of Open Access Journals (Sweden)

    K. Grzybowska

    2012-10-01

    Full Text Available Fast equipment setup in a machine on production line is the key precondition to increase the fl exibility of the production. Methodology of SMED (Single Minute Exchange of Die is an example which allows reducing the time of setup practically to the minimum. The article presents the theoretical bases and required rules as well as case study conducted in one of chosen enterprises. This paper also answers the question if SMED methodology is applicable in metallurgical sector, presenting the example of shortening the time between the production of various metallurgical products manufactured in the machine for continuous casting of steel (COS in Polish.

  12. 21 CFR 211.182 - Equipment cleaning and use log.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment cleaning and use log. 211.182 Section 211.182 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Records and...

  13. Listing of solar radiation measuring equipment and glossary

    Science.gov (United States)

    Carter, E. A.; Greenbaum, S. A.; Patel, A. M.

    1976-01-01

    An attempt is made to list and provide all available information about solar radiation measuring equipment which are being manufactured and are available on the market. The list is in tabular form and includes sensor type, response time, cost data and comments for each model. A cost code is included which shows ranges only.

  14. Shipboard and laboratory equipment

    Digital Repository Service at National Institute of Oceanography (India)

    Shyamprasad, M.; Ramaswamy, V.

    bed, and a digital clock and a transponder helped to locate the camera. Equipment for the analysis of the nodules such as x-ray fluorescence and atomic absorption spectrophotometers were installed aboard MV Skandi Surveyor and MV Fernella and MV G A...

  15. Technology and the future of medical equipment maintenance.

    Science.gov (United States)

    Wear, J O

    1999-05-01

    Maintenance of medical equipment has been changing rapidly in the past few years. It is changing more rapidly in developed countries, but changes are also occurring in developing countries. Some of the changes may permit improved maintenance on the higher technology equipment in developing countries, since they do not require onsite expertise. Technology has had an increasing impact on the development of medical equipment with the increased use of microprocessors and computers. With miniaturization from space technology and electronic chip design, powerful microprocessors and computers have been built into medical equipment. The improvement in manufacturing technology has increased the quality of parts and therefore the medical equipment. This has resulted in increased mean time between failures and reduced maintenance needs. This has made equipment more reliable in remote areas and developing countries. The built-in computers and advances in software design have brought about self-diagnostics in medical equipment. The technicians now have a strong tool to be used in maintenance. One problem in this area is getting access to the self-diagnostics. Some manufacturers will not readily provide this access to the owner of the equipment. Advances in telecommunications in conjunction with self-diagnostics make available remote diagnosis and repair. Since components can no longer be repaired, a remote repair technician can instruct an operator or an on-site repairman on board replacement. In case of software problems, the remote repair technician may perform the repairs over the telephone. It is possible for the equipment to be monitored remotely by modern without interfering with the operation of the equipment. These changes in technology require the training of biomedical engineering technicians (BMETs) to change. They must have training in computers and telecommunications. Some of this training can be done with telecommunications and computers.

  16. Video markers tracking methods for bike fitting

    Science.gov (United States)

    Rajkiewicz, Piotr; Łepkowska, Katarzyna; Cygan, Szymon

    2015-09-01

    Sports cycling is becoming increasingly popular over last years. Obtaining and maintaining a proper position on the bike has been shown to be crucial for performance, comfort and injury avoidance. Various techniques of bike fitting are available - from rough settings based on body dimensions to professional services making use of sophisticated equipment and expert knowledge. Modern fitting techniques use mainly joint angles as a criterion of proper position. In this work we examine performance of two proposed methods for dynamic cyclist position assessment based on video data recorded during stationary cycling. Proposed methods are intended for home use, to help amateur cyclist improve their position on the bike, and therefore no professional equipment is used. As a result of data processing, ranges of angles in selected joints are provided. Finally strengths and weaknesses of both proposed methods are discussed.

  17. Deep video deblurring

    KAUST Repository

    Su, Shuochen

    2016-11-25

    Motion blur from camera shake is a major problem in videos captured by hand-held devices. Unlike single-image deblurring, video-based approaches can take advantage of the abundant information that exists across neighboring frames. As a result the best performing methods rely on aligning nearby frames. However, aligning images is a computationally expensive and fragile procedure, and methods that aggregate information must therefore be able to identify which regions have been accurately aligned and which have not, a task which requires high level scene understanding. In this work, we introduce a deep learning solution to video deblurring, where a CNN is trained end-to-end to learn how to accumulate information across frames. To train this network, we collected a dataset of real videos recorded with a high framerate camera, which we use to generate synthetic motion blur for supervision. We show that the features learned from this dataset extend to deblurring motion blur that arises due to camera shake in a wide range of videos, and compare the quality of results to a number of other baselines.

  18. 40 CFR 1068.225 - What are the provisions for exempting engines/equipment for national security?

    Science.gov (United States)

    2010-07-01

    ... engines/equipment for national security? 1068.225 Section 1068.225 Protection of Environment ENVIRONMENTAL...) Manufacturers may request a national security exemption for engines/equipment not meeting the conditions of... ENGINE HAS AN EXEMPTION FOR NATIONAL SECURITY UNDER 40 CFR 1068.225.” (ii) “THIS EQUIPMENT HAS AN...

  19. Modern manufacturing engineering

    CERN Document Server

    2015-01-01

    This book covers recent research and trends in Manufacturing Engineering. The chapters emphasize different aspects of the transformation from materials to products. It provides the reader with fundamental materials treatments and the integration of processes. Concepts such as green and lean manufacturing are also covered in this book.

  20. Talking Video in 'Everyday Life'

    DEFF Research Database (Denmark)

    McIlvenny, Paul

    For better or worse, video technologies have made their way into many domains of social life, for example in the domain of therapeutics. Techniques such as Marte Meo, Video Interaction Guidance (ViG), Video-Enhanced Reflection on Communication, Video Home Training and Video intervention....../prevention (VIP) all promote the use of video as a therapeutic tool. This paper focuses on media therapeutics and the various in situ uses of video technologies in the mass media for therapeutic purposes. Reality TV parenting programmes such as Supernanny, Little Angels, The House of Tiny Tearaways, Honey, We......’re Killing the Kids, and Driving Mum and Dad Mad all use video as a prominent element of not only the audiovisual spectacle of reality television but also the interactional therapy, counselling, coaching and/or instruction intrinsic to these programmes. Thus, talk-on-video is used to intervene...

  1. The manufacture of LEU fuel elements at Dounreay

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, J.

    1997-08-01

    Two LEU test elements are being manufactured at Dounreay for test irradiation in the HFR at Petten, The Netherlands. This paper describes the installation of equipment and the development of the fabrication and inspection techniques necessary for the manufacture of LEU fuel plates. The author`s experience in overcoming the technical problems of stray fuel particles, dog-boning, uranium homogeneity and the measurement of uranium distribution is also described.

  2. Design and development of injection moulding machine for manufacturing maboratory

    Science.gov (United States)

    Siregar, R. A.; Khan, S. F.; Umurani, K.

    2017-10-01

    This paper presented the design process and manufacturing of a benchtop and inexpensive injection moulding machine for use as learning and teaching equipment in a manufacturing laboratory. The design use a vertical plunger type of injection equipped with clamping system. The maximum volume of barrel is 290 cc combined with injection plunger 60 mm provides ideal capacity for lab. The design concept process and preliminary test result are discussed. The flow rate increases with increase of motor speed and the packing time decrease with increase of motor speed. At 2500rpm the flow rate is 0.42m/s and pack time is 15 second.

  3. Manufacturing tolerant topology optimization

    DEFF Research Database (Denmark)

    Sigmund, Ole

    2009-01-01

    In this paper we present an extension of the topology optimization method to include uncertainties during the fabrication of macro, micro and nano structures. More specifically, we consider devices that are manufactured using processes which may result in (uniformly) too thin (eroded) or too thick...... (dilated) structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining and macro structures manufactured using milling processes. In the suggested robust topology optimization...... that the method provides manufacturing tolerant designs with little decrease in performance. As a positive side effect the robust design formulation also eliminates the longstanding problem of one-node connected hinges in compliant mechanism design using topology optimization....

  4. Video y desarrollo rural

    Directory of Open Access Journals (Sweden)

    Fraser Colin

    2015-01-01

    Full Text Available Las primeras experiencias de video rural fueron realizadas en Perú y México. El proyecto peruano es conocido como CESPAC (Centro de Servicios de Pedagogía Audiovisual para la Capacitación. Con financiamiento externo de la FAO fue iniciado en la década del 70. El proyecto mexicano fue bautizado con el nombre de PRODERITH (Programa de Desarrollo Rural Integrado del Trópico Húmedo. Su componente de video rural tuvo un éxito muy particular a nivel de base.La evaluación concluyó en que el video rural como sistema de comunicación social para el desarrollo es excelente y de bajo costo

  5. A Big Video Manifesto

    DEFF Research Database (Denmark)

    Mcilvenny, Paul Bruce; Davidsen, Jacob

    2017-01-01

    For the last few years, we have witnessed a hype about the potential results and insights that quantitative big data can bring to the social sciences. The wonder of big data has moved into education, traffic planning, and disease control with a promise of making things better with big numbers...... and beautiful visualisations. However, we also need to ask what the tools of big data can do both for the Humanities and for more interpretative approaches and methods. Thus, we prefer to explore how the power of computation, new sensor technologies and massive storage can also help with video-based qualitative...... inquiry, such as video ethnography, ethnovideo, performance documentation, anthropology and multimodal interaction analysis. That is why we put forward, half-jokingly at first, a Big Video manifesto to spur innovation in the Digital Humanities....

  6. Online video examination

    DEFF Research Database (Denmark)

    Qvist, Palle

    courses are accredited to the master programme. The programme is online, worldwide and on demand. It recruits students from all over the world. The programme is organized exemplary in accordance the principles in the problem-based and project-based learning method used at Aalborg University where students......The Master programme in Problem-Based Learning in Engineering and Science, MPBL (www.mpbl.aau.dk), at Aalborg University, is an international programme offering formalized staff development. The programme is also offered in smaller parts as single subject courses (SSC). Passed single subject...... have large influence on their own teaching, learning and curriculum. The programme offers streamed videos in combination with other learning resources. It is a concept which offers video as pure presentation - video lectures - but also as an instructional tool which gives the students the possibility...

  7. Brains on video games.

    Science.gov (United States)

    Bavelier, Daphne; Green, C Shawn; Han, Doug Hyun; Renshaw, Perry F; Merzenich, Michael M; Gentile, Douglas A

    2011-11-18

    The popular press is replete with stories about the effects of video and computer games on the brain. Sensationalist headlines claiming that video games 'damage the brain' or 'boost brain power' do not do justice to the complexities and limitations of the studies involved, and create a confusing overall picture about the effects of gaming on the brain. Here, six experts in the field shed light on our current understanding of the positive and negative ways in which playing video games can affect cognition and behaviour, and explain how this knowledge can be harnessed for educational and rehabilitation purposes. As research in this area is still in its early days, the contributors of this Viewpoint also discuss several issues and challenges that should be addressed to move the field forward.

  8. Collaborative Manufacturing for Small-Medium Enterprises

    Science.gov (United States)

    Irianto, D.

    2016-02-01

    Manufacturing systems involve decisions concerning production processes, capacity, planning, and control. In a MTO manufacturing systems, strategic decisions concerning fulfilment of customer requirement, manufacturing cost, and due date of delivery are the most important. In order to accelerate the decision making process, research on decision making structure when receiving order and sequencing activities under limited capacity is required. An effective decision making process is typically required by small-medium components and tools maker as supporting industries to large industries. On one side, metal small-medium enterprises are expected to produce parts, components or tools (i.e. jigs, fixture, mold, and dies) with high precision, low cost, and exact delivery time. On the other side, a metal small- medium enterprise may have weak bargaining position due to aspects such as low production capacity, limited budget for material procurement, and limited high precision machine and equipment. Instead of receiving order exclusively, a small-medium enterprise can collaborate with other small-medium enterprise in order to fulfill requirements high quality, low manufacturing cost, and just in time delivery. Small-medium enterprises can share their best capabilities to form effective supporting industries. Independent body such as community service at university can take a role as a collaboration manager. The Laboratory of Production Systems at Bandung Institute of Technology has implemented shared manufacturing systems for small-medium enterprise collaboration.

  9. MODERNIZATION OF CUPOLA EQUIPMENT

    Directory of Open Access Journals (Sweden)

    S. L. Rovin

    2015-01-01

    Full Text Available This article presents an automated cupola complex, developed by scientific-production enterprise «Technolit» together with GSTU named after P. O. Sukhoi, launched in the spring of 2015 at the plant «Stroiex» in the city of Chelyabinsk (the Russian Federation. The old cupolas (open type have been replaced by the new cupolas of the closed type, equipped with automatic control and management system and multistage wet gas treatment system. Cupolas are equipped with systems of post-combustion gases and the batch charging, the separate systems of air blast, systems of sludge removal and recirculation of water, the slag granulation installations, mechanized cleaning of cupola furnace and automatic safety system. These activities allowed the company to increase production and improve the quality of cast iron, reduce the coke consumption by 20% and reducing emissions of pollutants into the atmosphere almost 30 times.

  10. Development of an Educational Video to Improve HIV-Related Knowledge, Attitudes and Prevention among Company Workers in Ecuador

    Science.gov (United States)

    del Carmen Cabezas, María; Fornasini, Marco; Barmettler, David; Ortuño, Diego; Borja, Teresa; Albert, Adelin

    2015-01-01

    Objective: To develop and assess an innovative educational video package for improving HIV knowledge, attitudes and practices among company workers in Ecuador. Methods: The design and development of the HIV prevention educational video was based on the results of a large-scale survey conducted in 115 companies (commerce, manufacturing and real…

  11. Video library for video imaging detection at intersection stop lines.

    Science.gov (United States)

    2010-04-01

    The objective of this activity was to record video that could be used for controlled : evaluation of video image vehicle detection system (VIVDS) products and software upgrades to : existing products based on a list of conditions that might be diffic...

  12. Sensitive Equipment Decontamination

    Science.gov (United States)

    2017-10-01

    permeable and porous materials of equipment, such as rubbers, plastic and paints , due to their solvating powers. Such absorption can cause changes to...substrates (e.g., polymers, paints ). TECHNICAL PART STO-TR-HFM-233 3 - 39 N°- Requirement Technical Specifications Capability (efficacy...needed. Environmental aspects Toxicity of nanoparticles has to be studied. Operational parameters Unknown. Shelf-life parameters Depends on

  13. Soviet equipment flies in

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    End of February 1977 a Soviet Ilyushin-76 heavy freight aircraft landed at Cointrin airport having on board fifty large wire proprtional chambers and associated apparatus, together weighing 10 tons, supplied by the Joint Institute for Nuclear Research, Dubna, USSR. The equipment was for the CERN- Dubna-Munich-Saclay experiment NA4 on deep inelastic muon scattering being set up in the North Area of SPS. See Weekly Bulletin 11/78.

  14. Bridges and Equipment

    Science.gov (United States)

    2009-09-15

    the Trilateral Design and Test Code, paragraph 4.2.11, refers to a 15-percent impact factor for bending moment and deflection for crossing vehicle...speeds of 25 km/hr (15 mph). Since the BCS is equipped with both strain and load control features, the impact factor of each vehicle load and speed...can be determined. BCS testing to date has revealed that wheeled vehicle impact factors are approximately 10 percent and tracked vehicle impact

  15. User aware video streaming

    Science.gov (United States)

    Kerofsky, Louis; Jagannath, Abhijith; Reznik, Yuriy

    2015-03-01

    We describe the design of a video streaming system using adaptation to viewing conditions to reduce the bitrate needed for delivery of video content. A visual model is used to determine sufficient resolution needed under various viewing conditions. Sensors on a mobile device estimate properties of the viewing conditions, particularly the distance to the viewer. We leverage the framework of existing adaptive bitrate streaming systems such as HLS, Smooth Streaming or MPEG-DASH. The client rate selection logic is modified to include a sufficient resolution computed using the visual model and the estimated viewing conditions. Our experiments demonstrate significant bitrate savings compare to conventional streaming methods which do not exploit viewing conditions.

  16. Contextual analysis of videos

    CERN Document Server

    Thida, Myo; Monekosso, Dorothy

    2013-01-01

    Video context analysis is an active and vibrant research area, which provides means for extracting, analyzing and understanding behavior of a single target and multiple targets. Over the last few decades, computer vision researchers have been working to improve the accuracy and robustness of algorithms to analyse the context of a video automatically. In general, the research work in this area can be categorized into three major topics: 1) counting number of people in the scene 2) tracking individuals in a crowd and 3) understanding behavior of a single target or multiple targets in the scene.

  17. Video-based rendering

    CERN Document Server

    Magnor, Marcus A

    2005-01-01

    Driven by consumer-market applications that enjoy steadily increasing economic importance, graphics hardware and rendering algorithms are a central focus of computer graphics research. Video-based rendering is an approach that aims to overcome the current bottleneck in the time-consuming modeling process and has applications in areas such as computer games, special effects, and interactive TV. This book offers an in-depth introduction to video-based rendering, a rapidly developing new interdisciplinary topic employing techniques from computer graphics, computer vision, and telecommunication en

  18. CERN Video News

    CERN Multimedia

    2003-01-01

    From Monday you can see on the web the new edition of CERN's Video News. Thanks to a collaboration between the audiovisual teams at CERN and Fermilab, you can see a report made by the American laboratory. The clip concerns the LHC magnets that are being constructed at Fermilab. Also in the programme: the spectacular rotation of one of the ATLAS coils, the arrival at CERN of the first American magnet made at Brookhaven, the story of the discovery 20 years ago of the W and Z bosons at CERN. http://www.cern.ch/video or Bulletin web page.

  19. vid119_0601d -- Line coverage of sediment types from video collected from the Delta submersible vehicle.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Delta submersible vehicle, outfitted with video equipment (and other devices), was deployed from the R/V Auriga during September 2001 to monitor seafloor...

  20. stil119_0601a -- Point coverage of locations of still frames extracted from video imagery which depict sediment types

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Canadian ROPOS remotely operated vehicle (ROV) outfitted with video equipment (and other devices) was deployed from the NOAA Ship McAurthurII during May-June...

  1. vid119_0601c-- Point coverage of sediment types from video collected from the Delta submersible vehicle.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Delta submersible vehicle, outfitted with video equipment (and other devices), was deployed from the R/V Auriga during September 2001 to monitor seafloor...

  2. vid113_0401p -- Point coverage of sediment types from video collected from the Delta submersible vehicle.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Delta submersible vehicle, outfitted with video equipment (and other devices), was deployed from theR/V Auriga during September 2001 to monitor seafloor...

  3. Video special effects editing in MPEG-2 compressed video

    OpenAIRE

    Fernando, WAC; Canagarajah, CN; Bull, David

    2000-01-01

    With the increase of digital technology in video production, several types of complex video special effects editing have begun to appear in video clips. In this paper we consider fade-out and fade-in special effects editing in MPEG-2 compressed video without full frame decompression and motion estimation. We estimated the DCT coefficients and use these coefficients together with the existing motion vectors to produce these special effects editing in compressed domain. Results show that both o...

  4. Innovative Solution to Video Enhancement

    Science.gov (United States)

    2001-01-01

    Through a licensing agreement, Intergraph Government Solutions adapted a technology originally developed at NASA's Marshall Space Flight Center for enhanced video imaging by developing its Video Analyst(TM) System. Marshall's scientists developed the Video Image Stabilization and Registration (VISAR) technology to help FBI agents analyze video footage of the deadly 1996 Olympic Summer Games bombing in Atlanta, Georgia. VISAR technology enhanced nighttime videotapes made with hand-held camcorders, revealing important details about the explosion. Intergraph's Video Analyst System is a simple, effective, and affordable tool for video enhancement and analysis. The benefits associated with the Video Analyst System include support of full-resolution digital video, frame-by-frame analysis, and the ability to store analog video in digital format. Up to 12 hours of digital video can be stored and maintained for reliable footage analysis. The system also includes state-of-the-art features such as stabilization, image enhancement, and convolution to help improve the visibility of subjects in the video without altering underlying footage. Adaptable to many uses, Intergraph#s Video Analyst System meets the stringent demands of the law enforcement industry in the areas of surveillance, crime scene footage, sting operations, and dash-mounted video cameras.

  5. Quality management of manufacturing process based on manufacturing execution system

    Science.gov (United States)

    Zhang, Jian; Jiang, Yang; Jiang, Weizhuo

    2017-04-01

    Quality control elements in manufacturing process are elaborated. And the approach of quality management of manufacturing process based on manufacturing execution system (MES) is discussed. The functions of MES for a microcircuit production line are introduced conclusively.

  6. Video ethnography during and after caesarean sections: methodological challenges.

    Science.gov (United States)

    Stevens, Jeni; Schmied, Virginia; Burns, Elaine; Dahlen, Hannah G

    2017-07-01

    To describe the challenges of, and steps taken to successfully collect video ethnographic data during and after caesarean sections. Video ethnographic research uses real-time video footage to study a cultural group or phenomenon in the natural environment. It allows researchers to discover previously undocumented practices, which in-turn provides insight into strengths and weaknesses in practice. This knowledge can be used to translate evidence-based interventions into practice. Video ethnographic design. A video ethnographic approach was used to observe the contact between mothers and babies immediately after elective caesarean sections in a tertiary hospital in Sydney, Australia. Women, their support people and staff participated in the study. Data were collected via video footage and field notes in the operating theatre, recovery and the postnatal ward. Challenges faced whilst conducting video ethnographic research included attaining ethics approval, recruiting vast numbers of staff members and 'vulnerable' pregnant women, and endeavouring to be a 'fly on the wall' and a 'complete observer'. There were disadvantages being an 'insider' whilst conducting the research because occasionally staff members requested help with clinical tasks whilst collecting data; however, it was an advantage as it enabled ease of access to the environment and staff members that were to be recruited. Despite the challenges, video ethnographic research enabled the provision of unique data that could not be attained by any other means. Video ethnographic data are beneficial as it provides exceptionally rich data for in-depth analysis of interactions between the environment, equipment and people in the hospital environment. The analysis of this type of data can then be used to inform improvements for future care. © 2016 John Wiley & Sons Ltd.

  7. A video annotation methodology for interactive video sequence generation

    NARCIS (Netherlands)

    C.A. Lindley; R.A. Earnshaw; J.A. Vince

    2001-01-01

    textabstractThe FRAMES project within the RDN CRC (Cooperative Research Centre for Research Data Networks) has developed an experimental environment for dynamic virtual video sequence synthesis from databases of video data. A major issue for the development of dynamic interactive video applications

  8. Streaming Video--The Wave of the Video Future!

    Science.gov (United States)

    Brown, Laura

    2004-01-01

    Videos and DVDs give the teachers more flexibility than slide projectors, filmstrips, and 16mm films but teachers and students are excited about a new technology called streaming. Streaming allows the educators to view videos on demand via the Internet, which works through the transfer of digital media like video, and voice data that is received…

  9. Competitive Manufacturing Dynamics

    DEFF Research Database (Denmark)

    Rymaszewska, Anna; Christensen, Irene; Karlsson, Christer

    The increasing complexity of business environments and the pressure for organizations on delivering new products faster while maintaining the superior quality of their products, has forced manufacturing organizations to rethink their operations. Managers responsible for manufacturing ramp-up need...... to constantly improve this process in terms of time to volume, according to predefined cost and quality measures. The importance of the success of this process can lead to a significant creation of competitive advantage. This paper addresses the challenges of the manufacturing ramp-up process in the context...... of lean improvements as well as organizational learning....

  10. Rapid small lot manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Harrigan, R.W.

    1998-05-09

    The direct connection of information, captured in forms such as CAD databases, to the factory floor is enabling a revolution in manufacturing. Rapid response to very dynamic market conditions is becoming the norm rather than the exception. In order to provide economical rapid fabrication of small numbers of variable products, one must design with manufacturing constraints in mind. In addition, flexible manufacturing systems must be programmed automatically to reduce the time for product change over in the factory and eliminate human errors. Sensor based machine control is needed to adapt idealized, model based machine programs to uncontrolled variables such as the condition of raw materials and fabrication tolerances.

  11. DEVELOPMENT AND EVALUATION OF EDUCATIONAL PROGRAMS IN BIO-MEDICAL EQUIPMENT TECHNOLOGY, PHASE I. FINAL REPORT.

    Science.gov (United States)

    Technical Education Research Center, Cambridge, MA.

    OFFICIALS OF A REPRESENTATIVE SAMPLE OF HOSPITALS, BIOMEDICAL EQUIPMENT MANUFACTURERS, AND MEDICAL RESEARCH INSTITUTES IN NEW ENGLAND AND THREE MIDDLE ATLANTIC STATES WERE INTERVIEWED TO DETERMINE THE NEED FOR TECHNICIANS TO SERVICE AND MAINTAIN EQUIPMENT FOUND IN HOSPITALS AND BIOMEDICAL RESEARCH INSTITUTIONS. RESPONSES INDICATED A NEED FOR…

  12. 40 CFR 60.562-2 - Standards: Equipment leaks of VOC.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standards: Equipment leaks of VOC. 60... Volatile Organic Compound (VOC) Emissions from the Polymer Manufacturing Industry § 60.562-2 Standards: Equipment leaks of VOC. (a) Each owner or operator of an affected facility subject to the provisions of this...

  13. Sectoral Innovation Watch electrical and Optical Equipment Sector. Final sector report

    NARCIS (Netherlands)

    Broek, T. van den; Giessen, A.M. van der

    2011-01-01

    The electrical and optical equipment sector is a high-tech manufacturing sector. It is one of the most innovative sectors in Europe with investments and advances in fundamental research, applied R&D and innovation in the actual use of equipment. This sector is also one of the most global sectors

  14. 76 FR 32951 - Coal Mining Equipment, Technologies and Services Trade Mission to China and Mongolia

    Science.gov (United States)

    2011-06-07

    ... International Trade Administration Coal Mining Equipment, Technologies and Services Trade Mission to China and... operating in the coal and mining sector and manufacturing or distributing mining and mining-safety equipment... as well as appropriate government meetings. The mission will conclude at the China Coal and Mining...

  15. 75 FR 53457 - Lifesaving Equipment: Production Testing and Harmonization With International Standards

    Science.gov (United States)

    2010-08-31

    ... availability of approved equipment for U.S. flag vessels. Third-party certification bodies may qualify as... their equipment approved by each nation. Manufacturers often use third-party certification bodies for...-mail address, or a phone number in the body of your document so that the Coast Guard can contact you if...

  16. 49 CFR 583.11 - Allied suppliers of passenger motor vehicle equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Allied suppliers of passenger motor vehicle... CONTENT LABELING § 583.11 Allied suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment which an allied supplier supplies to the manufacturer with which...

  17. 49 CFR 583.10 - Outside suppliers of passenger motor vehicle equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Outside suppliers of passenger motor vehicle... CONTENT LABELING § 583.10 Outside suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment for which a manufacturer or allied supplier requests information...

  18. NEI You Tube Videos: Amblyopia

    Medline Plus

    Full Text Available ... Grants and Funding Extramural Research Division of Extramural Science Programs Division of Extramural Activities Extramural Contacts NEI ... Amaurosis Low Vision Refractive Errors Retinopathy of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded ...

  19. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five ... was designed to help you learn more about Rheumatoid Arthritis (RA). You will learn how the diagnosis ...

  20. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Our Staff Rheumatology Specialty Centers You are here: Home / Patient Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video ... to take a more active role in your care. The information in these videos should not take ...

  1. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... will allow you to take a more active role in your care. The information in these videos ... Stategies to Increase your Level of Physical Activity Role of Body Weight in Osteoarthritis Educational Videos for ...

  2. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... here. Will You Support the Education of Arthritis Patients? Each year, over 1 million people visit this ... of Body Weight in Osteoarthritis Educational Videos for Patients Rheumatoid Arthritis Educational Video Series Psoriatic Arthritis 101 ...

  3. Videos & Tools: MedlinePlus

    Science.gov (United States)

    ... of this page: https://medlineplus.gov/videosandcooltools.html Videos & Tools To use the sharing features on this page, please enable JavaScript. Watch health videos on topics such as anatomy, body systems, and ...

  4. Health Videos: MedlinePlus

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/anatomyvideos.html.htm Health Videos To use the sharing features on this page, please enable JavaScript. These animated videos show the anatomy of body parts and organ ...

  5. Scanning laser video camera/ microscope

    Science.gov (United States)

    Wang, C. P.; Bow, R. T.

    1984-10-01

    A laser scanning system capable of scanning at standard video rate has been developed. The scanning mirrors, circuit design and system performance, as well as its applications to video cameras and ultra-violet microscopes, are discussed.

  6. Video astronomy on the go using video cameras with small telescopes

    CERN Document Server

    Ashley, Joseph

    2017-01-01

    Author Joseph Ashley explains video astronomy's many benefits in this comprehensive reference guide for amateurs. Video astronomy offers a wonderful way to see objects in far greater detail than is possible through an eyepiece, and the ability to use the modern, entry-level video camera to image deep space objects is a wonderful development for urban astronomers in particular, as it helps sidestep the issue of light pollution. The author addresses both the positive attributes of these cameras for deep space imaging as well as the limitations, such as amp glow. The equipment needed for imaging as well as how it is configured is identified with hook-up diagrams and photographs. Imaging techniques are discussed together with image processing (stacking and image enhancement). Video astronomy has evolved to offer great results and great ease of use, and both novices and more experienced amateurs can use this book to find the set-up that works best for them. Flexible and portable, they open up a whole new way...

  7. Astronomy Video Contest

    Science.gov (United States)

    McFarland, John

    2008-05-01

    During Galileo's lifetime his staunchest supporter was Johannes Kepler, Imperial Mathematician to the Holy Roman Emperor. Johannes Kepler will be in St. Louis to personally offer a tribute to Galileo. Set Galileo's astronomy discoveries to music and you get the newest song by the well known acappella group, THE CHROMATICS. The song, entitled "Shoulders of Giants” was written specifically for IYA-2009 and will be debuted at this conference. The song will also be used as a base to create a music video by synchronizing a person's own images to the song's lyrics and tempo. Thousands of people already do this for fun and post their videos on YOU TUBE and other sites. The ASTRONOMY VIDEO CONTEST will be launched as a vehicle to excite, enthuse and educate people about astronomy and science. It will be an annual event administered by the Johannes Kepler Project and will continue to foster the goals of IYA-2009 for years to come. During this presentation the basic categories, rules, and prizes for the Astronomy Video Contest will be covered and finally the new song "Shoulders of Giants” by THE CHROMATICS will be unveiled

  8. Provocative Video Scenarios

    DEFF Research Database (Denmark)

    Caglio, Agnese

    This paper presents the use of ”provocative videos”, as a tool to support and deepen findings from ethnographic investigation on the theme of remote videocommunication. The videos acted as a resource to also investigate potential for novel technologies supporting continuous connection between...

  9. Fast Aerial Video Stitching

    Directory of Open Access Journals (Sweden)

    Jing Li

    2014-10-01

    Full Text Available The highly efficient and robust stitching of aerial video captured by unmanned aerial vehicles (UAVs is a challenging problem in the field of robot vision. Existing commercial image stitching systems have seen success with offline stitching tasks, but they cannot guarantee high-speed performance when dealing with online aerial video sequences. In this paper, we present a novel system which has an unique ability to stitch high-frame rate aerial video at a speed of 150 frames per second (FPS. In addition, rather than using a high-speed vision platform such as FPGA or CUDA, our system is running on a normal personal computer. To achieve this, after the careful comparison of the existing invariant features, we choose the FAST corner and binary descriptor for efficient feature extraction and representation, and present a spatial and temporal coherent filter to fuse the UAV motion information into the feature matching. The proposed filter can remove the majority of feature correspondence outliers and significantly increase the speed of robust feature matching by up to 20 times. To achieve a balance between robustness and efficiency, a dynamic key frame-based stitching framework is used to reduce the accumulation errors. Extensive experiments on challenging UAV datasets demonstrate that our approach can break through the speed limitation and generate an accurate stitching image for aerial video stitching tasks.

  10. Video Content Foraging

    NARCIS (Netherlands)

    van Houten, Ynze; Schuurman, Jan Gerrit; Verhagen, Pleunes Willem; Enser, Peter; Kompatsiaris, Yiannis; O’Connor, Noel E.; Smeaton, Alan F.; Smeulders, Arnold W.M.

    2004-01-01

    With information systems, the real design problem is not increased access to information, but greater efficiency in finding useful information. In our approach to video content browsing, we try to match the browsing environment with human information processing structures by applying ideas from

  11. Internet video search

    NARCIS (Netherlands)

    Snoek, C.G.M.; Smeulders, A.W.M.

    2011-01-01

    In this tutorial, we focus on the challenges in internet video search, present methods how to achieve state-of-the-art performance while maintaining efficient execution, and indicate how to obtain improvements in the near future. Moreover, we give an overview of the latest developments and future

  12. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available ... Donate Resources Links Videos Podcasts Webinars For the Media For Clinicians For Policymakers For Family Caregivers Glossary Sign Up for Our Blog Subscribe to Blog Enter your email address to subscribe to this blog and receive notifications of new posts by email. Email Address CLOSE Home About ...

  13. Scalable Video Coding

    NARCIS (Netherlands)

    Choupani, R.

    2017-01-01

    With the rapid improvements in digital communication technologies, distributing high-definition visual information has become more widespread. However, the available technologies were not sufficient to support the rising demand for high-definition video. This situation is further complicated when

  14. Video processing project

    CSIR Research Space (South Africa)

    Globisch, R

    2009-03-01

    Full Text Available Video processing source code for algorithms and tools used in software media pipelines (e.g. image scalers, colour converters, etc.) The currently available source code is written in C++ with their associated libraries and DirectShow- Filters....

  15. Video narrativer i sygeplejerskeuddannelsen

    DEFF Research Database (Denmark)

    Jensen, Inger

    2009-01-01

    I artiklen gives nogle bud på hvordan video narrativer kan bruges i sygeplejerskeuddannelsen som triggers, der åbner for diskussioner og udvikling af meningsfulde holdninger til medmennesker. Det belyses også hvordan undervisere i deres didaktiske overvejelser kan inddrage elementer fra teori om...

  16. Streaming-video produktion

    DEFF Research Database (Denmark)

    Grønkjær, Poul

    2004-01-01

     E-learning Lab på Aalborg Universitet har i forbindelse med forskningsprojektet Virtuelle Læringsformer og Læringsmiljøer foretaget en række praktiske eksperimenter med streaming-video produktioner. Hensigten med denne artikel er at formidle disse erfaringer. Artiklen beskriver hele produktionsf...... E-learning Lab på Aalborg Universitet har i forbindelse med forskningsprojektet Virtuelle Læringsformer og Læringsmiljøer foretaget en række praktiske eksperimenter med streaming-video produktioner. Hensigten med denne artikel er at formidle disse erfaringer. Artiklen beskriver hele...... produktionsforløbet: fra ide til færdigt produkt, forskellige typer af præsentationer, dramaturgiske overvejelser samt en konceptskitse. Streaming-video teknologien er nu så udviklet med et så tilfredsstillende audiovisuelt udtryk at vi kan begynde at fokusere på, hvilket indhold der er velegnet til at blive gjort...... tilgængeligt uafhængigt af tid og sted. Afslutningsvis er der en række kildehenvisninger, blandt andet en oversigt over de streaming-video produktioner, som denne artikel bygger på....

  17. Characteristics of Instructional Videos

    Science.gov (United States)

    Beheshti, Mobina; Taspolat, Ata; Kaya, Omer Sami; Sapanca, Hamza Fatih

    2018-01-01

    Nowadays, video plays a significant role in education in terms of its integration into traditional classes, the principal delivery system of information in classes particularly in online courses as well as serving as a foundation of many blended classes. Hence, education is adopting a modern approach of instruction with the target of moving away…

  18. Videos, Podcasts and Livechats

    Medline Plus

    Full Text Available Home About Donate Search Search What Is It Definition Pediatric Palliative Care Disease Types FAQ Handout for Patients and Families Is It Right for You How to Get It Talk to your Doctor Find a Provider Meet the Team Blog Articles & Stories News Resources Links Videos Podcasts ...

  19. Mobiele video voor bedrijfscommunicatie

    NARCIS (Netherlands)

    Niamut, O.A.; Weerdt, C.A. van der; Havekes, A.

    2009-01-01

    Het project Penta Mobilé liep van juni tot november 2009 en had als doel de mogelijkheden van mobiele video voor bedrijfscommunicatie toepassingen in kaart te brengen. Dit onderzoek werd uitgevoerd samen met vijf (‘Penta’) partijen: Business Tales, Condor Digital, European Communication Projects

  20. Acoustic Neuroma Educational Video

    Medline Plus

    Full Text Available ... Surgery What is acoustic neuroma Diagnosing Symptoms Side effects ... Groups Is a support group for me? Find a Group Upcoming Events Video Library Photo Gallery One-on-One Support ANetwork Peer Support Program Community Connections Overview Find a Meeting ...

  1. Developing a Video Steganography Toolkit

    OpenAIRE

    Ridgway, James; Stannett, Mike

    2014-01-01

    Although techniques for separate image and audio steganography are widely known, relatively little has been described concerning the hiding of information within video streams ("video steganography"). In this paper we review the current state of the art in this field, and describe the key issues we have encountered in developing a practical video steganography system. A supporting video is also available online at http://www.youtube.com/watch?v=YhnlHmZolRM

  2. Highway Maintenance Equipment Operator. Specialized Equipment. Training Materials.

    Science.gov (United States)

    Perky, Sandra Dutreau; And Others

    This curriculum guide provides instructional materials to assist in training equipment operators in the safe and effective use of highway maintenance equipment. It includes 18 units of instruction covering the large equipment used in maintenance operations. Each unit of instruction consists of eight basic components: performance objectives,…

  3. Highway Maintenance Equipment Operator. Miscellaneous Equipment. Training Materials.

    Science.gov (United States)

    Perky, Sandra Dutreau; And Others

    This curriculum guide provides instructional materials to assist in training equipment operators in the safe and effective use of highway maintenance equipment. It includes six units of instruction covering the small, specialized equipment used in maintenance operations. Each unit of instruction consists of eight basic components: performance…

  4. 75 FR 30781 - Manufacturing Council

    Science.gov (United States)

    2010-06-02

    ... International Trade Administration Manufacturing Council AGENCY: International Trade Administration, U.S... Manufacturing Council. SUMMARY: On March 16, 2010, the Department of Commerce's International Trade... the Manufacturing Council (Council). The March 16, 2010 notice provided that all applications must be...

  5. 75 FR 80040 - Manufacturing Council

    Science.gov (United States)

    2010-12-21

    ... International Trade Administration Manufacturing Council AGENCY: International Trade Administration, U.S... Manufacturing Council. SUMMARY: On November 23, 2010, the Department of Commerce's International Trade... vacant position on the Manufacturing Council (Council). The November 23, 2010 notice provided that all...

  6. Many Manufactured Nanosats Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To achieve the capability to affordably produce scores of nano-spacecraft for envisioned constellation missions, a new manufacturing process is needed to reduce the...

  7. Review of Manufacturing Intelligence

    OpenAIRE

    Stokey, Richard

    1990-01-01

    "Manufacturing Intelligence (Addison Wesley, Reading, Massachusetts, 1988, 352 pages, $43.25, ISBN 0-201-13576-0) by Paul Kenneth Wright and David Alan Bourne develops principles for the design of intelligent machine tools.

  8. MEDICAL MANUFACTURING INNOVATIONS

    Directory of Open Access Journals (Sweden)

    Cosma Sorin Cosmin

    2015-02-01

    Full Text Available The purpose of these studies was to improve the design and manufacturing process by selective laser melting, of new medical implants. After manufacturing process, the implants were measured, microscopically and mechanical analyzed. Implants manufactured by AM can be an attractive option for surface coatings to improve the osseointegration process. The main advantages of customized implants made by AM process are: the precise adaptation to the region of implantation, better cosmesis, reduced surgical times and better performance over their generic counterparts. These medical manufacturing changes the way that the surgeons are planning surgeries and engineers are designing custom implant. AM process has eliminated the constraints of shape, size, internal structure and mechanical properties making it possible for fabrication of implants that conform to the physical and mechanical requirements of implantation according to CT images. This article will review some custom implants fabricated in DME using biocompatible titanium.

  9. Manufacturing parabolic mirrors

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    The photo shows the construction of a vertical centrifuge mounted on an air cushion, with a precision of 1/10000 during rotation, used for the manufacture of very high=precision parabolic mirrors. (See Annual Report 1974.)

  10. [2011 Shanghai customer satisfaction report of DSA/X-ray equipment's after-service].

    Science.gov (United States)

    Li, Bin; Qian, Jianguo; Cao, Shaoping; Zheng, Yunxin; Xu, Zitian; Wang, Lijun

    2012-11-01

    To improve the manufacturer's medical equipment after-sale service, the fifth Shanghai zone customer satisfaction survey was launched by the end of 2011. The DSA/X-ray equipment was setup as an independent category for the first time. From the survey we can show that the DSA/X-ray equipment's CSI is higher than last year, the customer satisfaction scores of preventive maintenance and service contract are lower than others, and CSI of local brand is lower than imported brand.

  11. Performance characterization of night vision equipment based on Triangle Orientation Discrimination (TOD) methodology

    OpenAIRE

    Laurent, N.; Lejard, C.; Deltel, G.; Bijl, P.

    2013-01-01

    Night vision equipment is crucial in order to accomplish supremacy and safety of the troops on the battlefield. Evidently, system integrators, MODs and end-users need access to reliable quantitative characterization of the expected field performance when using night vision equipment. The Image Intensifier tube is one of the most important engines driving the performance for night vision equipment. As a major tube manufacturer, PHOTONIS has investigated the link between its products physical d...

  12. NEI You Tube Videos: Amblyopia

    Medline Plus

    Full Text Available ... NEI YouTube Videos: Amblyopia NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration Amblyopia Animations Blindness Cataract Convergence Insufficiency Diabetic Eye Disease Dilated Eye Exam Dry Eye For Kids Glaucoma ...

  13. SPECIAL REPORT: Creating Conference Video

    Directory of Open Access Journals (Sweden)

    Noel F. Peden

    2008-12-01

    Full Text Available Capturing video at a conference is easy. Doing it so the product is useful is another matter. Many subtle problems come into play so that video and audio obtained can be used to create a final product. This article discusses what the author learned in the two years of shooting and editing video for Code4Lib conference.

  14. CERN Video News on line

    CERN Multimedia

    2003-01-01

    The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

  15. We All Stream for Video

    Science.gov (United States)

    Technology & Learning, 2008

    2008-01-01

    More than ever, teachers are using digital video to enhance their lessons. In fact, the number of schools using video streaming increased from 30 percent to 45 percent between 2004 and 2006, according to Market Data Retrieval. Why the popularity? For starters, video-streaming products are easy to use. They allow teachers to punctuate lessons with…

  16. Social Properties of Mobile Video

    Science.gov (United States)

    Mitchell, April Slayden; O'Hara, Kenton; Vorbau, Alex

    Mobile video is now an everyday possibility with a wide array of commercially available devices, services, and content. These new technologies have created dramatic shifts in the way video-based media can be produced, consumed, and delivered by people beyond the familiar behaviors associated with fixed TV and video technologies. Such technology revolutions change the way users behave and change their expectations in regards to their mobile video experiences. Building upon earlier studies of mobile video, this paper reports on a study using diary techniques and ethnographic interviews to better understand how people are using commercially available mobile video technologies in their everyday lives. Drawing on reported episodes of mobile video behavior, the study identifies the social motivations and values underpinning these behaviors that help characterize mobile video consumption beyond the simplistic notion of viewing video only to kill time. This paper also discusses the significance of user-generated content and the usage of video in social communities through the description of two mobile video technology services that allow users to create and share content. Implications for adoption and design of mobile video technologies and services are discussed as well.

  17. Video Analysis of Rolling Cylinders

    Science.gov (United States)

    Phommarach, S.; Wattanakasiwich, P.; Johnston, I.

    2012-01-01

    In this work, we studied the rolling motion of solid and hollow cylinders down an inclined plane at different angles. The motions were captured on video at 300 frames s[superscript -1], and the videos were analyzed frame by frame using video analysis software. Data from the real motion were compared with the theory of rolling down an inclined…

  18. Video Games and Digital Literacies

    Science.gov (United States)

    Steinkuehler, Constance

    2010-01-01

    Today's youth are situated in a complex information ecology that includes video games and print texts. At the basic level, video game play itself is a form of digital literacy practice. If we widen our focus from the "individual player + technology" to the online communities that play them, we find that video games also lie at the nexus of a…

  19. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

  20. Holonic Manufacturing Paint Shop

    Science.gov (United States)

    Lind, Morten; Roulet-Dubonnet, Olivier; Nyen, Per Åge; Gellein, Lars Tore; Lien, Terje; Skavhaug, Amund

    In pursuit of flexibility and agility within discrete manufacturing, the surrounding logistics and handling processes of a paint shop is under construction as a laboratory prototype application. Holonic Manufacturing seems to be a promising strategic paradigm and architecture to use for a system characterised by production logistics and control. This paper describes the physical devices to be used; the desired functionality; and the basic logic control designed. Additionally, the ideas for holonification based on the already designed logic control is presented.

  1. Additive manufactured serialization

    Science.gov (United States)

    Bobbitt, III, John T.

    2017-04-18

    Methods for forming an identifying mark in a structure are described. The method is used in conjunction with an additive manufacturing method and includes the alteration of a process parameter during the manufacturing process. The method can form in a unique identifying mark within or on the surface of a structure that is virtually impossible to be replicated. Methods can provide a high level of confidence that the identifying mark will remain unaltered on the formed structure.

  2. Advances in Additive Manufacturing

    Science.gov (United States)

    2016-07-14

    Manufacturing session and provide a summary of work being performed in additive manufacturing by the Army, Air Force, and academia (Penn State University...Army Research Laboratory [ARL] and Air Force Research Laboratory [AFRL]) as well as academia (Penn State University’s Applied Research Laboratory...organic to the Warfighter, unmanned systems, networks , and robotics. Many of the materials and technologies needed to accomplish these goals are still

  3. Particulate Contaminant Formation and Transport in Microelectronic Manufacturing Processes. Phase 2

    National Research Council Canada - National Science Library

    Stout, P

    1997-01-01

    ...." The overall objective is to produce a charging, transport, and growth simulation (CTGS) tool that can be used effectively by equipment manufacturers and users to reduce particle generation in fabrication systems...

  4. Californium-252 Program Equipment Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Chattin, Fred Rhea [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilson, Kenton [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ezold, Julie G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-12-01

    To successfully continue the 252Cf production and meet the needs of the customers, a comprehensive evaluation of the Building 7920 processing equipment was requested to identify equipment critical to the operational continuity of the program.

  5. Measures of International Manufacturing and Trade of Clean Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Engel-Cox, Jill; Sandor, Debbie; Keyser, David; Mann, Margaret

    2017-05-25

    The technologies that produce clean energy, such as solar photovoltaic panels and lithium ion batteries for electric vehicles, are globally manufactured and traded. As demand and deployment of these technologies grows exponentially, the innovation to reach significant economies of scale and drive down energy production costs becomes less in the technology and more in the manufacturing of the technology. Manufacturing innovations and other manufacturing decisions can reduce costs of labor, materials, equipment, operating costs, and transportation, across all the links in the supply chain. To better understand the manufacturing aspect of the clean energy economy, we have developed key metrics for systematically measuring and benchmarking international manufacturing of clean energy technologies. The metrics are: trade, market size, manufacturing value-added, and manufacturing capacity and production. These metrics were applied to twelve global economies and four representative technologies: wind turbine components, crystalline silicon solar photovoltaic modules, vehicle lithium ion battery cells, and light emitting diode packages for efficient lighting and other consumer products. The results indicated that clean energy technologies are being developed via complex, dynamic, and global supply chains, with individual economies benefiting from different technologies and links in the supply chain, through both domestic manufacturing and global trade.

  6. New strategic roles of manufacturing

    DEFF Research Database (Denmark)

    Yang, Cheng; Johansen, John; Boer, Harry

    2008-01-01

    This paper aims to view manufacturing from a new angle, and tries to look beyond fit, focus and trade-offs, approaches which may no longer be sufficient for long-term competitive success. Four cases from different industries are described and used to illustrate and discuss the possibility...... of manufacturing playing new strategic roles. Backward, forward and lateral interactive support are suggested to explicate how manufacturing can realize its new strategic roles. Finally, four new strategic roles of manufacturing are suggested. They are: innovation manufacturing, ramp-up manufacturing, primary...... manufacturing, and service manufacturing....

  7. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  8. Reviews Exhibitions: Collider: Step inside the World's Greatest Experiment Equipment: Hero Steam Turbine Classroom Video: Most of Our Universe is Missing Book: Serving the Reich Book: Breakthrough to CLIL for Physics Book: The Good Research Guide Apps: Popplet Web Watch Apps

    Science.gov (United States)

    2014-03-01

    WE RECOMMEND Collider: step inside the world's greatest experiment A great exhibition at the Science Museum in London Hero Steam Turbine Superb engine model gets up to 2500 rpm Most of Our Universe is Missing BBC video explores the dark truth Serving the Reich Science and morality in Nazi Germany The Good Research Guide A non-specialist book for teachers starting out in education research WORTH A LOOK Breakthrough to CLIL for Physics A book based on a physics curriculum for non-English students WEB WATCH Electric cycles online: patterns of use APPS The virtual laboratory advances personal skills

  9. Enhanced video display and navigation for networked streaming video and networked video playlists

    Science.gov (United States)

    Deshpande, Sachin

    2006-01-01

    In this paper we present an automatic enhanced video display and navigation capability for networked streaming video and networked video playlists. Our proposed method uses Synchronized Multimedia Integration Language (SMIL) as presentation language and Real Time Streaming Protocol (RTSP) as network remote control protocol to automatically generate a "enhanced video strip" display for easy navigation. We propose and describe two approaches - a smart client approach and a smart server approach. We also describe a prototype system implementation of our proposed approach.

  10. Calibration grooming and alignment for LDUA High Resolution Stereoscopic Video Camera System (HRSVS)

    Energy Technology Data Exchange (ETDEWEB)

    Pardini, A.F.

    1998-01-27

    The High Resolution Stereoscopic Video Camera System (HRSVS) was designed by the Savannah River Technology Center (SRTC) to provide routine and troubleshooting views of tank interiors during characterization and remediation phases of underground storage tank (UST) processing. The HRSVS is a dual color camera system designed to provide stereo viewing of the interior of the tanks including the tank wall in a Class 1, Division 1, flammable atmosphere. The HRSVS was designed with a modular philosophy for easy maintenance and configuration modifications. During operation of the system with the LDUA, the control of the camera system will be performed by the LDUA supervisory data acquisition system (SDAS). Video and control status 1458 will be displayed on monitors within the LDUA control center. All control functions are accessible from the front panel of the control box located within the Operations Control Trailer (OCT). The LDUA will provide all positioning functions within the waste tank for the end effector. Various electronic measurement instruments will be used to perform CG and A activities. The instruments may include a digital volt meter, oscilloscope, signal generator, and other electronic repair equipment. None of these instruments will need to be calibrated beyond what comes from the manufacturer. During CG and A a temperature indicating device will be used to measure the temperature of the outside of the HRSVS from initial startup until the temperature has stabilized. This device will not need to be in calibration during CG and A but will have to have a current calibration sticker from the Standards Laboratory during any acceptance testing. This sensor will not need to be in calibration during CG and A but will have to have a current calibration sticker from the Standards Laboratory during any acceptance testing.

  11. Fostering science communication and outreach through video production in Dartmouth's IGERT Polar Environmental Change graduate program

    Science.gov (United States)

    Hammond Wagner, C. R.; McDavid, L. A.; Virginia, R. A.

    2013-12-01

    Dartmouth's NSF-supported IGERT Polar Environmental Change graduate program has focused on using video media to foster interdisciplinary thinking and to improve student skills in science communication and public outreach. Researchers, educators, and funding organizations alike recognize the value of video media for making research results more accessible and relevant to diverse audiences and across cultures. We present an affordable equipment set and the basic video training needed as well as available Dartmouth institutional support systems for students to produce outreach videos on climate change and its associated impacts on people. We highlight and discuss the successes and challenges of producing three types of video products created by graduate and undergraduate students affiliated with the Dartmouth IGERT. The video projects created include 1) graduate student profile videos, 2) a series of short student-created educational videos for Greenlandic high school students, and 3) an outreach video about women in science based on the experiences of women students conducting research during the IGERT field seminar at Summit Station and Kangerlussuaq, Greenland. The 'Science in Greenland--It's a Girl Thing' video was featured on The New York Times Dot Earth blog and the Huffington Post Green blog among others and received international recognition. While producing these videos, students 1) identified an audience and created story lines, 2) worked in front of and behind the camera, 3) utilized low-cost digital editing applications, and 4) shared the videos on multiple platforms from social media to live presentations. The three video projects were designed to reach different audiences, and presented unique challenges for content presentation and dissemination. Based on student and faculty assessment, we conclude that the video projects improved student science communication skills and increased public knowledge of polar science and the effects of climate change.

  12. Digital Video Teach Yourself VISUALLY

    CERN Document Server

    Watson, Lonzell

    2010-01-01

    Tips and techniques for shooting and sharing superb digital videos. Never before has video been more popular-or more accessible to the home photographer. Now you can create YouTube-worthy, professional-looking video, with the help of this richly illustrated guide. In a straightforward, simple, highly visual format, Teach Yourself VISUALLY Digital Video demystifies the secrets of great video. With colorful screenshots and illustrations plus step-by-step instructions, the book explains the features of your camera and their capabilities, and shows you how to go beyond "auto" to manually

  13. Study of manufacturing resource perception and process control of a radio-frequency-identification-enabled decentralized flexible manufacturing system

    Directory of Open Access Journals (Sweden)

    Zengqiang Jiang

    2017-01-01

    Full Text Available The fusion of mechatronics, communication, control, and information technologies has introduced new automation paradigms into the production environment. Plug-and-play flexible manufacturing systems will become suitable approaches in the future for the development of modular, flexible, and reconfigurable manufacturing systems, addressing the requirements of global markets. This article introduces a Petri Net model-driven methodology for the development, validation, and operation of a radio-frequency identification-enabled decentralized flexible manufacturing system. After analyzing the manufacturing processes and resources of a flexible manufacturing system, the manufacturing resources are classified into active and passive resources. Each active resource is equipped with a radio-frequency identification reader and each passive resource is banded with a radio-frequency identification tag. Real-time state and behavior logic models are built for manufacturing resources based on extended Petri Nets; the models are translated into XML and integrated with the manufacturing resources. In this fashion, each manufacturing resource becomes an autonomous agent, and it can make self-decisions and update its status through the twinned models. In this manner, automatic perception and process control are realized. Finally, the effectiveness and feasibility of the method are verified in an experimental system.

  14. Means for Transferring Knowledge in the Relocation of Manufacturing Units

    DEFF Research Database (Denmark)

    Yang, Cheng; Madsen, Erik Skov; Liangsiri, Jirapha

    2009-01-01

    The global spread of production makes companies relocating their manufacturing units to achieve economies of scale, enjoy low-cost labor, or access to new markets. For the relocation, not only equipments, systems and facilities, need to be moved, but also operational knowledge and experience. Based...

  15. Manufacture and quality control of interconnecting wire harnesses

    Science.gov (United States)

    1973-01-01

    Four-volume series of documents has been prepared as standard reference. Each volume may be used separately and covers wire and cable preparation as well as harness fabrication and installation. Series should be useful addition to libraries of manufactures of electrical and electronic equipment.

  16. Design, Manufacture and Characterization of a Journal Bearing ...

    African Journals Online (AJOL)

    The paper examines the potential for the indigenous design and manufacture of laboratory equipment used for demonstrating the engineering principles of taught courses in our Engineering Schools. Using the Demonstration Journal Bearing as a case-study it is shown that imaginative modifications to classical design ...

  17. CSIR eNews: Materials science and manufacturing

    CSIR Research Space (South Africa)

    CSIR

    2009-09-01

    Full Text Available The CSIR is in a unique position to add value and impact to the materials and manufacturing industries in Africa and to develop human capital through its critical mass of multi-disciplinary researchers, its equipment and infrastructure and its...

  18. Transferring Knowledge in the Relocation of Manufacturing Units

    DEFF Research Database (Denmark)

    Yang, Cheng; Madsen, Erik; Liangsiri, Jirapha

    2010-01-01

    ABSTRACT Purpose--The global spread of production makes companies relocating their manufacturing units frequently. Not only equipments, systems and facilities, need to be moved, but the transfer of operational knowledge and experience seem to be a major challenge. However, discussions on knowledge...

  19. Transferring Knowledge in the Relocation of Manufacturing Units

    DEFF Research Database (Denmark)

    Yang, Cheng; Madsen, Erik Skov; Liangsiri, Jirapha

    2010-01-01

    Purpose - The global spread of production makes companies relocate their manufacturing units frequently. Not only equipment, systems, and facilities, need to be moved, but the transfer of operational knowledge and experience seem to be a major challenge. However, discussions on knowledge transfer...

  20. Illustrating Geology With Customized Video in Introductory Geoscience Courses

    Science.gov (United States)

    Magloughlin, J. F.

    2008-12-01

    For the past several years, I have been creating short videos for use in large-enrollment introductory physical geology classes. The motivation for this project included 1) lack of appropriate depth in existing videos, 2) engagement of non-science students, 3) student indifference to traditional textbooks, 4) a desire to share the visual splendor of geology through virtual field trips, and 5) a desire to meld photography, animation, narration, and videography in self-contained experiences. These (HD) videos are information-intensive but short, allowing a focus on relatively narrow topics from numerous subdisciplines, incorporation into lectures to help create variety while minimally interrupting flow and holding students' attention, and manageable file sizes. Nearly all involve one or more field locations, including sites throughout the western and central continental U.S., as well as Hawaii, Italy, New Zealand, and Scotland. The limited scope of the project and motivations mentioned preclude a comprehensive treatment of geology. Instead, videos address geologic processes, locations, features, and interactions with humans. The videos have been made available via DVD and on-line streaming. Such a project requires an array of video and audio equipment and software, a broad knowledge of geology, very good computing power, adequate time, creativity, a substantial travel budget, liability insurance, elucidation of the separation (or non-separation) between such a project and other responsibilities, and, preferably but not essentially, the support of one's supervisor or academic unit. Involving students in such projects entails risks, but involving necessary technical expertise is virtually unavoidable. In my own courses, some videos are used in class and/or made available on-line as simply another aspect of the educational experience. Student response has been overwhelmingly positive, particularly when expectations of students regarding the content of the videos is made

  1. 77 FR 14000 - Foreign-Trade Zone 126-Reno, NV; Application for Temporary/Interim Manufacturing Authority...

    Science.gov (United States)

    2012-03-08

    ... Manufacturing Authority, Brightpoint North America L.P. (Cell Phone Kitting and Distribution), Reno, NV An... manufacturing (T/IM) authority within 126 at the Brightpoint North America L.P. (Brightpoint) facility, located....80), lithium batteries (8507.30), cellular phone sets (8517.11), video phones (8517.18), base...

  2. Representing videos in tangible products

    Science.gov (United States)

    Fageth, Reiner; Weiting, Ralf

    2014-03-01

    Videos can be taken with nearly every camera, digital point and shoot cameras, DSLRs as well as smartphones and more and more with so-called action cameras mounted on sports devices. The implementation of videos while generating QR codes and relevant pictures out of the video stream via a software implementation was contents in last years' paper. This year we present first data about what contents is displayed and how the users represent their videos in printed products, e.g. CEWE PHOTOBOOKS and greeting cards. We report the share of the different video formats used, the number of images extracted out of the video in order to represent the video, the positions in the book and different design strategies compared to regular books.

  3. Weldability of Additive Manufactured Stainless Steel

    Science.gov (United States)

    Matilainen, Ville-Pekka; Pekkarinen, Joonas; Salminen, Antti

    Part size in additive manufacturing is limited by the size of building area of AM equipment. Occasionally, larger constructions that AM machines are able to produce, are needed, and this creates demand for welding AM parts together. However there is very little information on welding of additive manufactured stainless steels. The aim of this study was to investigate the weldability aspects of AM material. In this study, comparison of the bead on plate welds between AM parts and sheet metal parts is done. Used material was 316L stainless steel, AM and sheet metal, and parts were welded with laser welding. Weld quality was evaluated visually from macroscopic images. Results show that there are certain differences in the welds in AM parts compared to the welds in sheet metal parts. Differences were found in penetration depths and in type of welding defects. Nevertheless, this study presents that laser welding is suitable process for welding AM parts.

  4. Geotail Video News Release

    Science.gov (United States)

    1992-01-01

    The Geotail mission, part of the International Solar Terrestrial Physics (ISTP) program, measures global energy flow and transformation in the magnetotail to increase understanding of fundamental magnetospheric processes. The satellite was launched on July 24, 1992 onboard a Delta II rocket. This video shows with animation the solar wind, and its effect on the Earth. The narrator explains that the Geotail spacecraft was designed and built by the Institute of Space and Astronautical Science (ISAS), the Japanese Space Agency. The mission objectives are reviewed by one of the scientist in a live view. The video also shows an animation of the orbit, while the narrator explains the orbit and the reason for the small launch window.

  5. CARACTERIZACION VOZ Y VIDEO

    Directory of Open Access Journals (Sweden)

    Octavio José Salcedo Parra

    2011-11-01

    Full Text Available La motivación para caracterizar el tráfico de voz y video está en la necesidad de las empresas proveedoras de servicio en mantener redes de transporte de información con capacidades acordes a los requerimientos de los usuarios.  Poder determinar en forma oportuna como los elementos técnicos que hacen parte de las redes afectan su desempeño, teniendo en cuenta que cada tipo de servicio es afectado en mayor o menor medida por dichos elementos dentro de los que tenemos el jitter, las demoras y las pérdidas de paquetes entre otros. El presente trabajo muestra varios casos de caracterización de tráfico tanto de voz como de video en las que se utilizan una diversidad de técnicas para diferentes tipos de servicio.

  6. Video Pulses: User-Based Modeling of Interesting Video Segments

    Directory of Open Access Journals (Sweden)

    Markos Avlonitis

    2014-01-01

    Full Text Available We present a user-based method that detects regions of interest within a video in order to provide video skims and video summaries. Previous research in video retrieval has focused on content-based techniques, such as pattern recognition algorithms that attempt to understand the low-level features of a video. We are proposing a pulse modeling method, which makes sense of a web video by analyzing users' Replay interactions with the video player. In particular, we have modeled the user information seeking behavior as a time series and the semantic regions as a discrete pulse of fixed width. Then, we have calculated the correlation coefficient between the dynamically detected pulses at the local maximums of the user activity signal and the pulse of reference. We have found that users' Replay activity significantly matches the important segments in information-rich and visually complex videos, such as lecture, how-to, and documentary. The proposed signal processing of user activity is complementary to previous work in content-based video retrieval and provides an additional user-based dimension for modeling the semantics of a social video on the web.

  7. Solid state video cameras

    CERN Document Server

    Cristol, Y

    2013-01-01

    Solid State Video Cameras reviews the state of the art in the field of solid-state television cameras as compiled from patent literature. Organized into 10 chapters, the book begins with the basic array types of solid-state imagers and appropriate read-out circuits and methods. Documents relating to improvement of picture quality, such as spurious signal suppression, uniformity correction, or resolution enhancement, are also cited. The last part considerssolid-state color cameras.

  8. The video lecture

    OpenAIRE

    Crook, Charles; Schofield, Louise

    2017-01-01

    Vocabulary for describing the structures, roles, and relationships characteristic of traditional, or ‘offline’, education has been seamlessly applied to the designs of ‘online’ education. One example is the lecture, delivered as a video recording. The purpose of this research is to consider the concept of ‘lecture’ as realised in both offline and online contexts. We explore how media differences entail different student experiences and how these differences relate to design decisions associat...

  9. The Future of Video

    OpenAIRE

    Li, F.

    2016-01-01

    Executive Summary \\ud \\ud A range of technological innovations (e.g. smart phones and digital cameras), infrastructural advances (e.g. broadband and 3G/4G wireless networks) and platform developments (e.g. YouTube, Facebook, Snapchat, Instagram, Amazon, and Netflix) are collectively transforming the way video is produced, distributed, consumed, archived – and importantly, monetised. Changes have been observed well beyond the mainstream TV and film industries, and these changes are increasingl...

  10. From computer images to video presentation: Enhancing technology transfer

    Science.gov (United States)

    Beam, Sherilee F.

    1994-01-01

    With NASA placing increased emphasis on transferring technology to outside industry, NASA researchers need to evaluate many aspects of their efforts in this regard. Often it may seem like too much self-promotion to many researchers. However, industry's use of video presentations in sales, advertising, public relations and training should be considered. Today, the most typical presentation at NASA is through the use of vu-graphs (overhead transparencies) which can be effective for text or static presentations. For full blown color and sound presentations, however, the best method is videotape. In fact, it is frequently more convenient due to its portability and the availability of viewing equipment. This talk describes techniques for creating a video presentation through the use of a combined researcher and video professional team.

  11. First results on video meteors from Crete, Greece

    Science.gov (United States)

    Maravelias, G.

    2012-01-01

    This work presents the first systematic video meteor observations from a, forthcoming permanent, station in Crete, Greece, operating as the first official node within the International Meteor Organization's Video Network. It consists of a Watec 902 H2 Ultimate camera equipped with a Panasonic WV-LA1208 (focal length 12mm, f/0.8) lens running MetRec. The system operated for 42 nights during 2011 (August 19-December 30, 2011) recording 1905 meteors. It is significantly more performant than a previous system used by the author during the Perseids 2010 (DMK camera 21AF04.AS by The Imaging Source, CCTV lens of focal length 2.8 mm, UFO Capture v2.22), which operated for 17 nights (August 4-22, 2010) recording 32 meteors. Differences - according to the author's experience - between the two softwares (MetRec, UFO Capture) are discussed along with a small guide to video meteor hardware.

  12. Chapter 12. Space Heating Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

  13. Video time encoding machines.

    Science.gov (United States)

    Lazar, Aurel A; Pnevmatikakis, Eftychios A

    2011-03-01

    We investigate architectures for time encoding and time decoding of visual stimuli such as natural and synthetic video streams (movies, animation). The architecture for time encoding is akin to models of the early visual system. It consists of a bank of filters in cascade with single-input multi-output neural circuits. Neuron firing is based on either a threshold-and-fire or an integrate-and-fire spiking mechanism with feedback. We show that analog information is represented by the neural circuits as projections on a set of band-limited functions determined by the spike sequence. Under Nyquist-type and frame conditions, the encoded signal can be recovered from these projections with arbitrary precision. For the video time encoding machine architecture, we demonstrate that band-limited video streams of finite energy can be faithfully recovered from the spike trains and provide a stable algorithm for perfect recovery. The key condition for recovery calls for the number of neurons in the population to be above a threshold value.

  14. Utilizing Video Games

    Science.gov (United States)

    Blaize, L.

    Almost from its birth, the computer and video gaming industry has done an admirable job of communicating the vision and attempting to convey the experience of traveling through space to millions of gamers from all cultures and demographics. This paper will propose several approaches the 100 Year Starship Study can take to use the power of interactive media to stir interest in the Starship and related projects among a global population. It will examine successful gaming franchises from the past that are relevant to the mission and consider ways in which the Starship Study could cooperate with game development studios to bring the Starship vision to those franchises and thereby to the public. The paper will examine ways in which video games can be used to crowd-source research aspects for the Study, and how video games are already considering many of the same topics that will be examined by this Study. Finally, the paper will propose some mechanisms by which the 100 Year Starship Study can establish very close ties with the gaming industry and foster cooperation in pursuit of the Study's goals.

  15. Video Malware - Behavioral Analysis

    Directory of Open Access Journals (Sweden)

    Rajdeepsinh Dodia

    2015-04-01

    Full Text Available Abstract The counts of malware attacks exploiting the internet increasing day by day and has become a serious threat. The latest malware spreading out through the media players embedded using the video clip of funny in nature to lure the end users. Once it is executed and installed then the behavior of the malware is in the malware authors hand. The spread of the malware emulates through Internet USB drives sharing of the files and folders can be anything which makes presence concealed. The funny video named as it connected to the film celebrity where the malware variant was collected from the laptop of the terror outfit organization .It runs in the backend which it contains malicious code which steals the user sensitive information like banking credentials username amp password and send it to the remote host user called command amp control. The stealed data is directed to the email encapsulated in the malicious code. The potential malware will spread through the USB and other devices .In summary the analysis reveals the presence of malicious code in executable video file and its behavior.

  16. Handbook of quality integrated circuit manufacturing

    CERN Document Server

    Zorich, Robert

    1991-01-01

    Here is a comprehensive practical guide to entire wafer fabrication process from A to Z. Written by a practicing process engineer with years of experience, this book provides a thorough introduction to the complex field of IC manufacturing, including wafer area layout and design, yield optimization, just-in-time management systems, statistical quality control, fabrication equipment and its setup, and cleanroom techniques. In addition, it contains a wealth of information on common process problems: How to detect them, how to confirm them, and how to solve them. Whether you are a new enginner or

  17. Acoustical Specification of New Equipment with Respect to Noise Policy

    Science.gov (United States)

    Rusko, Miroslav; Biľová, Monika; Lumnitzer, Ervin

    2011-01-01

    Increasingly, the Slovakian and European occupational health and safety legislation requires designers, manufacturers and suppliers of industrial plants and equipment to minimise hazards, such as excessive noise associated with their products, and to provide information about potential hazards. Even so, noise is still often overlooked with the result that the working environment is needlessly noisy. The purpose of this paper is to: - provide guidelines for the preparation of noise specifications; - show how to calculate the maximum acceptable noise level for new equipment; - show how to interpret noise information provided by suppliers.

  18. Thermo Techno Modern Analytical Equipment for Research and Industrial Laboratories

    Directory of Open Access Journals (Sweden)

    Khokhlov, S.V.

    2014-03-01

    Full Text Available A brief overview of some models of Thermo Techno analytical equipment and possible areas of their application is given. Thermo Techno Company was created in 2000 as a part of representative office of international corporation Thermo Fisher Scientific — world leader in manufacturing analytical equipments. Thermo Techno is a unique company in its integrated approach in solving the problems of the user, which includes a series of steps: setting the analytical task, selection of effective analysis methods, sample delivery and preparation as well as data transmitting and archiving.

  19. Clinical engineering & equipment policy for Sao Paulo State, Brazil.

    Science.gov (United States)

    Wang, B

    1990-01-01

    A comprehensive equipment policy was established for the health system of Sao Paulo State, Brazil. Research, development and regulation issues were integrated with all phases of the equipment life cycle, including: planning, procurement, acceptance testing, commissioning, maintenance, repair, refitting, and decommissioning. This policy was implemented by a multidisciplinary group, which advised and coordinated planning and procurement, created a technology management and maintenance network composed of clinical engineering teams and reference centers, and worked closely with manufacturers, universities and research institutes to improve the quality and increase the variety of domestic medical products in order to substitute for imported devices.

  20. Development of equipment for fabricating DUPIC fuel powder

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ki Ho; Yang, M. S.; Park, J. J.; Lee, J. W.; Kim, J. H.; Cho, K. H.; Lee, D. Y.; Lee, Y. S.; Na, S. H

    1999-06-01

    The powder fabrication processes, as the first stage of manufacturing DUPIC (Direct Use of PWR spent fuel In CANDU) fuel, consist of the slitting of spent PWR fuel rods, REOX (Oxidation and REduction of Oxide Fuels) processing to produce the powder feedstock, the milling of the produced powder, the granulation of the milled powder, and the mixing of the granulated powder with pressing lubricants. All these processes should be conducted by remote means in a hot-cell environment where the direct human access is limited to the strictest minimum due to the high radioactivity. This report describe the development of the equipment for fabricating DUPIC fuel powder. These equipment are Slitting Machine, Oxidation and Reduction (OREOX) Furnace, Mill, Roll Compactor, and Mixer. Remote design concept was applied to all the equipment for use in the M6 hot-cell of the IMEF. Mechanical design considerations and capabilities of the equipment for remote operation and maintenance are presented. First prototypes were developed and installed in the DUPIC full scale mock-up and tested using a master-slave manipulator. Redesign and reconstruction were made on each equipment based on mock-up test results. The remote technology acquired through this research was utilized in developing other equipment for DUPIC fuel fabrication, thereby improving safety and increasing productivity. This technology could also be extended to the area of remote handling equipment development for use in hazardous environments. (author). 14 refs., 9 tabs., 21 figs.

  1. Equipment Obsolescence Analysis and Management Software

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.; Carret, L.; Shaon, S.; Schultz, C.

    2015-07-01

    The procurement engineering resources at Nuclear Power Plants (NPPs) are experiencing increasing backlog for procurement items primarily due to the inability to order the original replacement parts. The level of effort and time required to prepare procurement packages is increasing since the number of obsolete parts are increasing exponentially. Procurement packages for obsolete components and parts are much more complex and take more time to prepare because of the need to perform equivalency evaluations, testing requirements and test acceptance criteria development, commercial grade dedication or equipment qualification, and increasing efforts to verify that no fraudulent or counterfeit parts are procured. This problem will be further compounded when NPPs pursue license renewal and approval for plant-life extension. Advanced planning and advanced knowledge of equipment obsolescence is required to allow for sufficient time to properly procure replacement parts for obsolete items. The uncertain supply chain capability due to obsolescence is a real problem and can cause a risk to reliable plant operations due to the potential for a lack of available spare parts and replacement components to support outages and unplanned component failures. Advanced notification of obsolescence is increasingly more important to ensure that adequate time and planning is scheduled to procure the proper replacement parts. A thorough analysis of Original Equipment Manufacturer (OEM) availability and inventory as well as an analysis of failure rates and usage rates is required to predict critical part needs to allow for early identification of obsolescence issues so that a planned and controlled strategy to qualify replacement equipment can be implemented. (Author)

  2. High definition in minimally invasive surgery: a review of methods for recording, editing, and distributing video.

    Science.gov (United States)

    Kelly, Christopher R; Hogle, Nancy J; Landman, Jaime; Fowler, Dennis L

    2008-09-01

    The use of high-definition cameras and monitors during minimally invasive procedures can provide the surgeon and operating team with more than twice the resolution of standard definition systems. Although this dramatic improvement in visualization offers numerous advantages, the adoption of high definition cameras in the operating room can be challenging because new recording equipment must be purchased, and several new technologies are required to edit and distribute video. The purpose of this review article is to provide an overview of the popular methods for recording, editing, and distributing high-definition video. This article discusses the essential technical concepts of high-definition video, reviews the different kinds of equipment and methods most often used for recording, and describes several options for video distribution.

  3. Robust Manufacturing Control

    CERN Document Server

    2013-01-01

    This contributed volume collects research papers, presented at the CIRP Sponsored Conference Robust Manufacturing Control: Innovative and Interdisciplinary Approaches for Global Networks (RoMaC 2012, Jacobs University, Bremen, Germany, June 18th-20th 2012). These research papers present the latest developments and new ideas focusing on robust manufacturing control for global networks. Today, Global Production Networks (i.e. the nexus of interconnected material and information flows through which products and services are manufactured, assembled and distributed) are confronted with and expected to adapt to: sudden and unpredictable large-scale changes of important parameters which are occurring more and more frequently, event propagation in networks with high degree of interconnectivity which leads to unforeseen fluctuations, and non-equilibrium states which increasingly characterize daily business. These multi-scale changes deeply influence logistic target achievement and call for robust planning and control ...

  4. Greening up Auto Part Manufacturing: A Collaboration between Academia and Industry

    Science.gov (United States)

    Kneas, Kristi A.; Armstrong, Drew L.; Brank, Alice R.; Johnson, Amanda L.; Kissinger, Chelsea A.; Mabe, Adam R.; Sezer, Ozge; Fontinell, Mike

    2009-01-01

    Historically, manufacture of automotive electronic components and screen-printing of automotive instrument clusters at DENSO Manufacturing Tennessee, Inc. required washing of equipment such as screens, stencils, and jigs with sizable quantities of volatile organic compounds and hazardous air pollutants. Collaborative efforts between the Maryville…

  5. 40 CFR 80.24 - Controls applicable to motor vehicle manufacturers.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Controls applicable to motor vehicle... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Controls and Prohibitions § 80.24 Controls applicable to motor vehicle manufacturers. (a) (b) The manufacturer of any motor vehicle equipped with an...

  6. Video-based measurements for wireless capsule endoscope tracking

    Science.gov (United States)

    Spyrou, Evaggelos; Iakovidis, Dimitris K.

    2014-01-01

    The wireless capsule endoscope is a swallowable medical device equipped with a miniature camera enabling the visual examination of the gastrointestinal (GI) tract. It wirelessly transmits thousands of images to an external video recording system, while its location and orientation are being tracked approximately by external sensor arrays. In this paper we investigate a video-based approach to tracking the capsule endoscope without requiring any external equipment. The proposed method involves extraction of speeded up robust features from video frames, registration of consecutive frames based on the random sample consensus algorithm, and estimation of the displacement and rotation of interest points within these frames. The results obtained by the application of this method on wireless capsule endoscopy videos indicate its effectiveness and improved performance over the state of the art. The findings of this research pave the way for a cost-effective localization and travel distance measurement of capsule endoscopes in the GI tract, which could contribute in the planning of more accurate surgical interventions.

  7. Video Analysis: Lessons from Professional Video Editing Practice

    Directory of Open Access Journals (Sweden)

    Eric Laurier

    2008-09-01

    Full Text Available In this paper we join a growing body of studies that learn from vernacular video analysts quite what video analysis as an intelligible course of action might be. Rather than pursuing epistemic questions regarding video as a number of other studies of video analysis have done, our concern here is with the crafts of producing the filmic. As such we examine how audio and video clips are indexed and brought to hand during the logging process, how a first assembly of the film is built at the editing bench and how logics of shot sequencing relate to wider concerns of plotting, genre and so on. In its conclusion we make a number of suggestions about the future directions of studying video and film editors at work. URN: urn:nbn:de:0114-fqs0803378

  8. Diccionario Lean Manufacturing

    OpenAIRE

    Muñoz Ellner, Sarah María

    2016-01-01

    El Diccionario Bilingüe de Lean Manufacturing pretende ser un instrumento de apoyo a todo aquel que tenga la responsabilidad de planear, ejecutar o simplemente algún interés con las actividades de Lean Manufacturing, aportando así también conceptos claros tanto en castellano como en inglés, con el fin de entender de forma integral el alcance mismo que puede llegar a tener dicha filosofía, al igual que se proporcionara una serie de siglas y herramientas para la implementación del Lean Manufact...

  9. Manufacturing and automation

    Directory of Open Access Journals (Sweden)

    Ernesto Córdoba Nieto

    2006-09-01

    Full Text Available The article presents concepts and definitions from different sources concerning automation. The work approaches automation by virtue of the author’s experience in manufacturing production; why and how automation prolects are embarked upon is considered. Technological reflection regarding the progressive advances or stages of automation in the production area is stressed. Coriat and Freyssenet’s thoughts about and approaches to the problem of automation and its current state are taken and examined, especially that referring to the problem’s relationship with reconciling the level of automation with the flexibility and productivity demanded by competitive, worldwide manufacturing.

  10. Laser in manufacturing

    CERN Document Server

    Davim, J Paulo

    2013-01-01

    Generally a laser (light amplification by stimulated emission of radiation) is defined as "a device which uses a quantum mechanical effect, stimulated emission, to generate a coherent beam of light from a lasing medium of controlled purity, size, and shape". Laser material processing represents a great number of methods, which are rapidly growing in current and different industrial applications as new alternatives to traditional manufacturing processes. Nowadays, the use of lasers in manufacturing is an emerging area with a wide variety of applications, for example, in electronics, molds an

  11. Surveillance Video Synopsis in GIS

    Directory of Open Access Journals (Sweden)

    Yujia Xie

    2017-10-01

    Full Text Available Surveillance videos contain a considerable amount of data, wherein interesting information to the user is sparsely distributed. Researchers construct video synopsis that contain key information extracted from a surveillance video for efficient browsing and analysis. Geospatial–temporal information of a surveillance video plays an important role in the efficient description of video content. Meanwhile, current approaches of video synopsis lack the introduction and analysis of geospatial-temporal information. Owing to the preceding problems mentioned, this paper proposes an approach called “surveillance video synopsis in GIS”. Based on an integration model of video moving objects and GIS, the virtual visual field and the expression model of the moving object are constructed by spatially locating and clustering the trajectory of the moving object. The subgraphs of the moving object are reconstructed frame by frame in a virtual scene. Results show that the approach described in this paper comprehensively analyzed and created fusion expression patterns between video dynamic information and geospatial–temporal information in GIS and reduced the playback time of video content.

  12. Recognizing problem video game use.

    Science.gov (United States)

    Porter, Guy; Starcevic, Vladan; Berle, David; Fenech, Pauline

    2010-02-01

    It has been increasingly recognized that some people develop problem video game use, defined here as excessive use of video games resulting in various negative psychosocial and/or physical consequences. The main objectives of the present study were to identify individuals with problem video game use and compare them with those without problem video game use on several variables. An international, anonymous online survey was conducted, using a questionnaire with provisional criteria for problem video game use, which the authors have developed. These criteria reflect the crucial features of problem video game use: preoccupation with and loss of control over playing video games and multiple adverse consequences of this activity. A total of 1945 survey participants completed the survey. Respondents who were identified as problem video game users (n = 156, 8.0%) differed significantly from others (n = 1789) on variables that provided independent, preliminary validation of the provisional criteria for problem video game use. They played longer than planned and with greater frequency, and more often played even though they did not want to and despite believing that they should not do it. Problem video game users were more likely to play certain online role-playing games, found it easier to meet people online, had fewer friends in real life, and more often reported excessive caffeine consumption. People with problem video game use can be identified by means of a questionnaire and on the basis of the present provisional criteria, which require further validation. These findings have implications for recognition of problem video game users among individuals, especially adolescents, who present to mental health services. Mental health professionals need to acknowledge the public health significance of the multiple negative consequences of problem video game use.

  13. A Taxonomy of Manufacturing Strategies

    OpenAIRE

    Jeffrey G. Miller; Aleda V. Roth

    1994-01-01

    This paper describes the development and analysis of a numerical taxonomy of manufacturing strategies. The taxonomy was developed with standard methods of cluster analysis, and is based on the relative importance attached to eleven competitive capabilities defining the manufacturing task of 164 large American manufacturing business units. Three distinct clusters of manufacturing strategy groups were observed. Though there is an industry effect, all three manufacturing strategy types are obser...

  14. Instrumentation: endoscopes and equipment.

    Science.gov (United States)

    Gaab, Michael R

    2013-02-01

    The technology and instrumentation for neuroendoscopy are described: endoscopes (principles, designs, applications), light sources, instruments, accessories, holders, and navigation. Procedures for cleaning, sterilizing, and storing are included. The description is based on the author's own technical development and neuroendoscopic experience, published technology and devices, and publications on endoscopic surgery. The main work horses in neuroendoscopy are rigid glass rod endoscopes (Hopkins optics) due to the optical quality, which allows full high-definition video imaging, different angles of view, and autoclavability, which is especially important in neuroendoscopy due to the risk of Creutzfeldt-Jakob disease infection. Applications are endoscopy assistance to microsurgery, stand-alone endoscopy controlled approaches such as transnasal skull base, ventriculoscopy, and cystoscopy in the cranium. Rigid glass rod optics are also applicable in spinal endoscopy and peripheral nerve decompression using special tubes and cannulas. Rigid minifiberoptics with less resolution may be used in less complex procedures (ventriculoscopy, cystoscopy, endoscopy assistance with pen-designs) and have the advantages of smaller diameters and disposable designs. Flexible fiberoptics are usually used in combination with rigid scopes and can be steered, e.g. through the ventricles, in spinal procedures for indications including syringomyelia and multicystic hydrocephalus. Upcoming flexible chip endoscopes ("chip-in-the-tip") may replace flexible fiberoptics in the future, offering higher resolution and cold LED-illumination, and may provide for stereoscopic neuroendoscopy. Various instruments (mechanical, coagulation, laser guides, ultrasonic aspirators) and holders are available. Certified methods for cleaning and sterilization, with special requirements in neuroapplications, are important. Neuroendoscopic instrumentation is now an established technique in neurosurgical practice and

  15. High Definition Video Streaming Using H.264 Video Compression

    OpenAIRE

    Bechqito, Yassine

    2009-01-01

    This thesis presents high definition video streaming using H.264 codec implementation. The experiment carried out in this study was done for an offline streaming video but a model for live high definition streaming is introduced, as well. Prior to the actual experiment, this study describes digital media streaming. Also, the different technologies involved in video streaming are covered. These include streaming architecture and a brief overview on H.264 codec as well as high definition t...

  16. Performance Evaluation of Bucket based Excavating, Loading and Transport (BELT) Equipment - An OEE Approach

    Science.gov (United States)

    Mohammadi, Mousa; Rai, Piyush; Gupta, Suprakash

    2017-03-01

    Overall Equipment Effectiveness (OEE) has been used since last over two decades as a measure of performance in manufacturing industries. Unfortunately, enough, application of OEE in mining and excavation industry has not been duly adopted. In this paper an effort has been made to identify the OEE for performance evaluation of Bucket based Excavating, Loading and Transport (BELT) equipment. The conceptual model of OEE, as used in the manufacturing industries, has been revised to adapt to the BELT equipment. The revised and adapted model considered the operational time, speed and bucket capacity utilization losses as the key OEE components for evaluating the performance of BELT equipment. To illustrate the efficacy of the devised model on real-time basis, a case study was undertaken on the biggest single bucket excavating equipment - the dragline, in a large surface coal mine. One-year data was collected in order to evaluate the proposed OEE model.

  17. 21 CFR 866.4520 - Immunofluorometer equipment.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents § 866.4520 Immunofluorometer equipment. (a) Identification. Immunofluorometer equipment for clinical use with...

  18. Video Quality Prediction over Wireless 4G

    KAUST Repository

    Lau, Chun Pong

    2013-04-14

    In this paper, we study the problem of video quality prediction over the wireless 4G network. Video transmission data is collected from a real 4G SCM testbed for investigating factors that affect video quality. After feature transformation and selection on video and network parameters, video quality is predicted by solving as regression problem. Experimental results show that the dominated factor on video quality is the channel attenuation and video quality can be well estimated by our models with small errors.

  19. Rate-Adaptive Video Compression (RAVC) Universal Video Stick (UVS)

    Science.gov (United States)

    Hench, David L.

    2009-05-01

    The H.264 video compression standard, aka MPEG 4 Part 10 aka Advanced Video Coding (AVC) allows new flexibility in the use of video in the battlefield. This standard necessitates encoder chips to effectively utilize the increased capabilities. Such chips are designed to cover the full range of the standard with designers of individual products given the capability of selecting the parameters that differentiate a broadcast system from a video conferencing system. The SmartCapture commercial product and the Universal Video Stick (UVS) military versions are about the size of a thumb drive with analog video input and USB (Universal Serial Bus) output and allow the user to select the parameters of imaging to the. Thereby, allowing the user to select video bandwidth (and video quality) using four dimensions of quality, on the fly, without stopping video transmission. The four dimensions are: 1) spatial, change from 720 pixel x 480 pixel to 320 pixel x 360 pixel to 160 pixel x 180 pixel, 2) temporal, change from 30 frames/ sec to 5 frames/sec, 3) transform quality with a 5 to 1 range, 4) and Group of Pictures (GOP) that affects noise immunity. The host processor simply wraps the H.264 network abstraction layer packets into the appropriate network packets. We also discuss the recently adopted scalable amendment to H.264 that will allow limit RAVC at any point in the communication chain by throwing away preselected packets.

  20. Video Tracking dalam Digital Compositing untuk Paska Produksi Video

    Directory of Open Access Journals (Sweden)

    Ardiyan Ardiyan

    2012-04-01

    Full Text Available Video Tracking is one of the processes in video postproduction and motion picture digitally. The ability of video tracking method in the production is helpful to realize the concept of the visual. It is considered in the process of visual effects making. This paper presents how the tracking process and its benefits in visual needs, especially for video and motion picture production. Some of the things involved in the process of tracking such as failure to do so are made clear in this discussion.