Hahn, Seungsoo
2016-10-28
The Hamiltonian matrix for the first excited vibrational states of a protein can be effectively represented by local vibrational modes constituting amide III, II, I, and A modes to simulate various vibrational spectra. Methods for obtaining the Hamiltonian matrix from ab initio quantum calculation results are discussed, where the methods consist of three steps: selection of local vibrational mode coordinates, calculation of a reduced Hessian matrix, and extraction of the Hamiltonian matrix from the Hessian matrix. We introduce several methods for each step. The methods were assessed based on the density functional theory calculation results of 24 oligopeptides with four different peptide lengths and six different secondary structures. The completeness of a Hamiltonian matrix represented in the reduced local mode space is improved by adopting a specific atom group for each amide mode and reducing the effect of ignored local modes. The calculation results are also compared to previous models using C=O stretching vibration and transition dipole couplings. We found that local electric transition dipole moments of the amide modes are mainly bound on the local peptide planes. Their direction and magnitude are well conserved except amide A modes, which show large variation. Contrary to amide I modes, the vibrational coupling constants of amide III, II, and A modes obtained by analysis of a dipeptide are not transferable to oligopeptides with the same secondary conformation because coupling constants are affected by the surrounding atomic environment.
A comparison of several methods for the calculation of vibration mode shape derivatives
Sutter, T. R.; Camarda, C. J.; Walsh, J. L.; Adelman, H. M.
1986-01-01
Four methods for the calculation of derivatives of vibration mode shapes (eigenvectors) with respect to design parameters are reviewed and compared. These methods (finite difference method, Nelson's method, modal method and a modified modal method) are implemented in a general-purpose commercial finite element program and applied to a cantilever beam and a stiffened cylinder with a cutout. A beam tip mass, a beam root height and specific dimensions of the cylinder model comprise the design variables. Data are presented showing the amount of central processor time used to compute the first four eigenvector derivatives for each example problem; errors and rapidity of convergence of the approximate derivative to the exact derivative are taken into account. Nelson's method proved to be most reliable and efficient.
Energy Technology Data Exchange (ETDEWEB)
Zhang, Feng; Tominaga, Keisuke, E-mail: atmyh@ntu.edu.tw, E-mail: tominaga@kobe-u.ca.jp, E-mail: junichi.nishizawa@hanken.jp [Molecular Photoscience Research Center, Kobe University, Nada, Kobe 657-0013 (Japan); Hayashi, Michitoshi, E-mail: atmyh@ntu.edu.tw, E-mail: tominaga@kobe-u.ca.jp, E-mail: junichi.nishizawa@hanken.jp; Wang, Houng-Wei [Center for Condensed Matter Sciences, National Taiwan University, 1 Roosevelt Rd., Sec. 4, Taipei 10617, Taiwan (China); Kambara, Ohki; Sasaki, Tetsuo [Research Institute of Electronics, Shizuoka University, 3-5-1 Jyohoku, Naka-ku, Hamamatsu, Shizuoka 432-8561 (Japan); Nishizawa, Jun-ichi, E-mail: atmyh@ntu.edu.tw, E-mail: tominaga@kobe-u.ca.jp, E-mail: junichi.nishizawa@hanken.jp [Jun-ichi Nishizawa Memorial Research Center, Tohoku University, 519-1176 Aoba, Aramaki, Aoba-ku, Sendai 980-0845 (Japan)
2014-05-07
The phonon modes of molecular crystals in the terahertz frequency region often feature delicately coupled inter- and intra-molecular vibrations. Recent advances in density functional theory such as DFT-D{sup *} have enabled accurate frequency calculation. However, the nature of normal modes has not been quantitatively discussed against experimental criteria such as isotope shift (IS) and correlation field splitting (CFS). Here, we report an analytical mode-decoupling method that allows for the decomposition of a normal mode of interest into intermolecular translation, libration, and intramolecular vibrational motions. We show an application of this method using the crystalline anthracene system as an example. The relationship between the experimentally obtained IS and the IS obtained by PBE-D{sup *} simulation indicates that two distinctive regions exist. Region I is associated with a pure intermolecular translation, whereas region II features coupled intramolecular vibrations that are further coupled by a weak intermolecular translation. We find that the PBE-D{sup *} data show excellent agreement with the experimental data in terms of IS and CFS in region II; however, PBE-D{sup *} produces significant deviations in IS in region I where strong coupling between inter- and intra-molecular vibrations contributes to normal modes. The result of this analysis is expected to facilitate future improvement of DFT-D{sup *}.
Vibrational modes of nanolines
Heyliger, Paul R.; Flannery, Colm M.; Johnson, Ward L.
2008-04-01
Brillouin-light-scattering spectra previously have been shown to provide information on acoustic modes of polymeric lines fabricated by nanoimprint lithography. Finite-element methods for modeling such modes are presented here. These methods provide a theoretical framework for determining elastic constants and dimensions of nanolines from measured spectra in the low gigahertz range. To make the calculations feasible for future incorporation in inversion algorithms, two approximations of the boundary conditions are employed in the calculations: the rigidity of the nanoline/substrate interface and sinusoidal variation of displacements along the nanoline length. The accuracy of these approximations is evaluated as a function of wavenumber and frequency. The great advantage of finite-element methods over other methods previously employed for nanolines is the ability to model any cross-sectional geometry. Dispersion curves and displacement patterns are calculated for modes of polymethyl methacrylate nanolines with cross-sectional dimensions of 65 nm × 140 nm and rectangular or semicircular tops. The vibrational displacements and dispersion curves are qualitatively similar for the two geometries and include a series of flexural, Rayleigh-like, and Sezawa-like modes. This paper is a contribution of the National Institute of Standards and Technology and is not subject to copyright in the United States.
Calculation of exact vibration modes for plane grillages by the dynamic stiffness method
Hallauer, W. L., Jr.; Liu, R. Y. L.
1982-01-01
A dynamic stiffness method is developed for the calculation of the exact modal parameters for plane grillages which consist of straight and uniform beams with coincident elastic and inertial axes. Elementary bending-torsion beam theory is utilized, and bending translation is restricted to one direction. The exact bending-torsion dynamic stiffness matrix is obtained for a straight and uniform beam element with coincident elastic and inertial axes. The element stiffness matrices are assembled using the standard procedure of the static stiffness method to form the dynamic stiffness matrix of the complete grillage. The exact natural frequencies, mode shapes, and generalized masses of the grillage are then calculated by solving a nonlinear eigenvalue problem based on the dynamic stiffness matrix. The exact modal solutions for an example grillage are calculated and compared with the approximate solutions obtained by using the finite element method.
Zhao, Yonghong; Li, Zhi; Liu, Jianjun; Hu, Cong; Zhang, Huo; Qin, Binyi; Wu, Yifang
2018-01-01
The characteristic absorption spectra of crystalline urea in 0.6-1.8 THz region have been measured by terahertz time-domain spectroscopy at room temperature experimentally. Five broad absorption peaks were observed at 0.69, 1.08, 1.27, 1.47 and 1.64 THz respectively. Moreover, density functional theory (DFT) calculation has been performed for the isolated urea molecule, and there is no infrared intensity in the region below 1.8 THz. This means that single molecule calculations are failure to predict the experimental spectra of urea crystals. To simulate these spectra, calculations on a cluster of seven urea molecules using M06-2X and B3LYP-D3 are performed, and we found that M06-2X perform better. The observed THz vibrational modes are assigned to bending and torsional modes related to the intermolecular H-bond interactions with the help of potential energy distribution (PED) method. Using the reduced-density-gradient (RDG) analysis, the positions and types of intermolecular H-bond interactions in urea crystals are visualized. Therefore, we can confirm that terahertz spectroscopy can be used as an effective means to detect intermolecular H-bond interactions in molecular crystals.
Cao, Yan; Sheremetyeva, Natalya; Liang, Liangbo; Yuan, Hui; Zhong, Tingting; Meunier, Vincent; Pan, Minghu
2017-09-01
When layered transition-metal dichalcogenides (TMDs) are scaled down from a three- to a 2D geometry, electronic and structural transitions occur, leading to the emergence of properties not usually found in the bulk. Here, we report a systematic Raman study of exfoliated semi-metallic WTe2 flakes with thickness ranging from few layers down to a single layer. A dramatic change in the Raman spectra occurs between the monolayer and few-layer WTe2 as a vibrational mode centered at ~86.9 cm-1 in the monolayer splits into two active modes at 82.9 and 89.6 cm-1 in the bilayer. Davydov splitting of these two modes is found in the bilayer, as further evidenced by polarized Raman measurements. Strong angular dependence of Raman modes on the WTe2 film thickness reflects that the existence of directional interlayer interaction, rather than isotropic van der Waals (vdw) coupling, is playing an essential role affecting the phonon modes, especially in anisotropic 2D WTe2 material. Therefore, the strong evolution of Raman modes with thickness and polarization direction, can not only be a reliable fingerprint for the determination of the thickness and the crystallographic orientation, but can also be an ideal probe for such strong and directional interlayer interaction.
Lattice vibrational modes and their frequency shifts in semiconductor nanowires.
Yang, Li; Chou, M Y
2011-07-13
We have performed first-principles calculations to study the lattice vibrational modes and their Raman activities in silicon nanowires (SiNWs). Two types of characteristic vibrational modes are examined: high-frequency optical modes and low-frequency confined modes. Their frequencies have opposite size dependence with a red shift for the optical modes and a blue shift for the confined modes as the diameter of SiNWs decreases. In addition, our calculations show that these vibrational modes can be detected by Raman scattering measurements, providing an efficient way to estimate the size of SiNWs.
Taleb-Mokhtari, Ilham Naoual; Lazreg, Abbassia; Sekkal-Rahal, Majda; Bestaoui, Noreya
2016-01-15
A structural investigation of the organic molecules is being carried out using vibrational spectroscopy. In this study, normal co-ordinate calculations of anomers of the methyl-D-glucopyranoside and methyl-β-D-xylopyranoside in the crystalline state have been performed using the modified Urey-Bradley-Shimanouchi force field (mUBSFF) combined with an intermolecular potential energy function. The latter includes Van der Waals interactions, electrostatic terms, and explicit hydrogen bond functions. The vibrational spectra of the compounds recorded in the crystalline state, in the 4000-500 cm(-1) spectral region for the IR spectra, and in the 4000-20 cm(-1) spectral range for the Raman spectra are presented. After their careful examination, several differences in the intensities and frequency shifts have been observed. The theoretical spectra have been obtained after a tedious refinement of the force constants. Thus, on the basis of the obtained potential distribution, each observed band in IR and in Raman has been assigned to a vibrational mode. The obtained results are indeed in agreement with those observed experimentally and thus confirm the previous assignments made for the methyl-α and β-D-glucopyranoside, as well as for the methyl-β-D-xylopyranoside. Copyright © 2015 Elsevier B.V. All rights reserved.
Relating normal vibrational modes to local vibrational modes: benzene and naphthalene.
Zou, Wenli; Kalescky, Robert; Kraka, Elfi; Cremer, Dieter
2013-07-01
Local vibrational modes can be directly derived from normal vibrational modes using the method of Konkoli and Cremer (Int J Quant Chem 67:29, 1998). This implies the calculation of the harmonic force constant matrix F (q) (expressed in internal coordinates q) from the corresponding Cartesian force constant matrix f (x) with the help of the transformation matrix U = WB (†)(BWB (†))(-1) (B: Wilson's B-matrix). It is proven that the local vibrational modes are independent of the choice of the matrix W. However, the choice W = M (-1) (M: mass matrix) has numerical advantages with regard to the choice W = I (I: identity matrix), where the latter is frequently used in spectroscopy. The local vibrational modes can be related to the normal vibrational modes in the form of an adiabatic connection scheme (ACS) after rewriting the Wilson equation with the help of the compliance matrix. The ACSs of benzene and naphthalene based on experimental vibrational frequencies are discussed as nontrivial examples. It is demonstrated that the local-mode stretching force constants provide a quantitative measure for the C-H and C-C bond strength.
Park, G. Barratt
2014-10-01
Franck-Condon vibrational overlap integrals for the tilde{A} {^1A_u}—{tilde{X}} {^1Σ _g^+} transition in acetylene have been calculated in full dimension in the harmonic normal mode basis. The calculation uses the method of generating functions first developed for polyatomic Franck-Condon factors by Sharp and Rosenstock [J. Chem. Phys. 41(11), 3453-3463 (1964)], and previously applied to acetylene by Watson [J. Mol. Spectrosc. 207(2), 276-284 (2001)] in a reduced-dimension calculation. Because the transition involves a large change in the equilibrium geometry of the electronic states, two different types of corrections to the coordinate transformation are considered to first order: corrections for axis-switching between the Cartesian molecular frames and corrections for the curvilinear nature of the normal modes at large amplitude. The angular factor in the wavefunction for the out-of-plane component of the trans bending mode, ν _4^' ' }, is treated as a rotation, which results in an Eckart constraint on the polar coordinates of the bending modes. To simplify the calculation, the other degenerate bending mode, ν _5^' ' }, is integrated in the Cartesian basis and later transformed to the constrained polar coordinate basis, restoring the conventional v and l quantum numbers. An updated tilde{A}-state harmonic force field obtained recently in the R. W. Field research group is evaluated. The results for transitions involving the gerade vibrational modes are in qualitative agreement with experiment. Calculated results for transitions involving ungerade modes are presented in Paper II of this series [G. B. Park, J. H. Baraban, and R. W. Field, "Full dimensional Franck-Condon factors for the acetylene tilde{A} {^1A_u}—{tilde{X}} {^1Σ _g^+} transition. II. Vibrational overlap factors for levels involving excitation in ungerade modes," J. Chem. Phys. 141, 134305 (2014)].
Vibration mode shape control by prestressing
Holnicki-Szulc, Jan; Haftka, Raphael T.
1992-01-01
A procedure is described for reducing vibration at sensitive locations on a structure, by induced distortions. The emphasis is placed on the excitation in a narrow frequency band, so that only a small number of vibration modes contribute to the intensity of the forced response. The procedure is demonstrated on an antenna truss example, showing that, with repeated frequencies, it is very easy to move nodal lines of one of the modes.
Evaluation of Bus Vibration Comfort Based on Passenger Crowdsourcing Mode
Directory of Open Access Journals (Sweden)
Hong Zhao
2016-01-01
Full Text Available Vibration comfort is an important factor affecting the quality of service (QoS of bus. In order to make people involved in supervising bus’s vibration comfort and improve passengers’ riding experience, a novel mode of passenger crowdsourcing is introduced. In this paper, comfort degree of bus vibration is calculated from bus’s vibration signals collected by passengers’ smartphones and sent through WiFi to the Boa web server which shows the vibration comfort on the LCD deployed in bus and maybe trigger alarm lamp when the vibration is beyond the threshold. Three challenges here have been overcome: firstly, space coordinate transformation algorithm is used to solve the constant drift of signals collected; secondly, a low-pass filter is designed to isolate gravity from signals real-timely via limited computing resources; thirdly, an embedded evaluation system is developed according to the calculation procedure specified by criterion ISO 2631-1997. Meanwhile, the model proposed is tested in a practical running environment, the vibration data in whole travel are recorded and analyzed offline. The results show that comfort degree of vibration obtained from the experimental system is identical with the truth, and this mode is proved to be effective.
Beyond local group modes in vibrational sum frequency generation.
Chase, Hilary M; Psciuk, Brian T; Strick, Benjamin L; Thomson, Regan J; Batista, Victor S; Geiger, Franz M
2015-04-09
We combine deuterium labeling, density functional theory calculations, and experimental vibrational sum frequency generation spectroscopy into a form of "counterfactual-enabled molecular spectroscopy" for producing reliable vibrational mode assignments in situations where local group mode approximations are insufficient for spectral interpretation and vibrational mode assignments. We demonstrate the method using trans-β-isoprene epoxydiol (trans-β-IEPOX), a first-generation product of isoprene relevant to atmospheric aerosol formation, and one of its deuterium-labeled isotopologues at the vapor/silica interface. We use our method to determine that the SFG responses that we obtain from trans-β-IEPOX are almost exclusively due to nonlocal modes involving multiple C-H groups oscillating at the same frequency as one vibrational mode. We verify our assignments using deuterium labeling and use DFT calculations to predict SFG spectra of additional isotopologues that have not yet been synthesized. Finally, we use our new insight to provide a viable alternative to molecular orientation analysis methods that rely on local mode approximations in cases where the local mode approximation is not applicable.
Surface vibrational modes in disk-shaped resonators.
Dmitriev, A V; Gritsenko, D S; Mitrofanov, V P
2014-03-01
The natural frequencies and distributions of displacement components for the surface vibrational modes in thin isotropic elastic disks are calculated. In particular, the research is focused on even solutions for low-lying resonant vibrations with large angular wave numbers. Several families of modes are found which are interpreted as modified surface modes of an infinitely long cylinder and Lamb modes of a plate. The results of calculation are compared with the results of the experimental measurements of vibrational modes generated by means of resonant excitation in duraluminum disk with radius of ≈90 mm and thickness of 16 mm in the frequency range of 130-200 kHz. An excellent agreement between the calculated and measured frequencies is found. Measurements of the structure of the resonant peaks show splitting of some modes. About a half of the measured modes has splitting Δfsplit/fmode at the level of the order of 10(-5). The Q-factors of all modes measured in vacuum lie in the interval (2…3)×10(5). This value is typical for duraluminum mechanical resonators in the ultrasonic frequency range. Copyright © 2013 Elsevier B.V. All rights reserved.
The normal modes of lattice vibrations of ice XI
Zhang, Peng; Wang, Zhe; Lu, Ying-Bo; Ding, Zheng-Wen
2016-01-01
The vibrational spectrum of ice XI at thermal wavelengths using the CASTEP code, a first-principles simulation method, is investigated. A dual-track approach is constructed to verify the validity for the computational phonon spectrum: collate the simulated spectrum with inelastic neutron scattering experiments and assign the photon scattering peaks according to the calculated normal vibration frequencies. The 33 optical normal vibrations at the Brillouin center are illustrated definitely from the ab initio outcomes. The depolarizing field effect of the hydrogen bond vibrations at frequencies of 229 cm−1 and 310 cm−1 is found to agree well with the LST relationship. It is a convincing evidence to manifest the LO-TO splitting of hydrogen bonds in ice crystal. We attribute the two hydrogen bond peaks to the depolarization effect and apply this viewpoint to ordinary ice phase, ice Ih, which is difficult to analyse their vibration modes due to proton disorder. PMID:27375199
Signature of nonadiabatic coupling in excited-state vibrational modes.
Soler, Miguel A; Nelson, Tammie; Roitberg, Adrian E; Tretiak, Sergei; Fernandez-Alberti, Sebastian
2014-11-13
Using analytical excited-state gradients, vibrational normal modes have been calculated at the minimum of the electronic excited-state potential energy surfaces for a set of extended conjugated molecules with different coupling between them. Molecular model systems composed of units of polyphenylene ethynylene (PPE), polyphenylenevinylene (PPV), and naphthacene/pentacene (NP) have been considered. In all cases except the NP model, the influence of the nonadiabatic coupling on the excited-state equilibrium normal modes is revealed as a unique highest frequency adiabatic vibrational mode that overlaps with the coupling vector. This feature is removed by using a locally diabatic representation in which the effect of NA interaction is removed. Comparison of the original adiabatic modes with a set of vibrational modes computed in the locally diabatic representation demonstrates that the effect of nonadiabaticity is confined to only a few modes. This suggests that the nonadiabatic character of a molecular system may be detected spectroscopically by identifying these unique state-specific high frequency vibrational modes.
Skyrmion Vibration Modes within the Rational Map Ansatz
Lin, W.T.; Piette, B.
2008-01-01
We study the vibration modes of the Skyrme model within the rational map ansatz. We show that the vibrations of the radial profiles and the rational maps are decoupled and we consider explicitly the cases B=1, B=2, and B=4. We then compare our results with the vibration modes obtained numerically by Barnes et al. and show that qualitatively the rational map reproduces the vibration modes obtained numerically but that the vibration frequencies of these modes do not match very well.
Vibration modes and frequencies of structures
Durling, R. J.; Kvaternik, R. G.
1980-01-01
SUDAN, Substructuring in Direct Analysis, analyzes natural modes and frequencies of vibration of structural systems. Based on direct method of analysis that employs substructures methodology, program is used with structures that may be represented as equivalent system of beam, springs, and rigid bodies.
Electric field generated by axial longitudinal vibration modes of microtubule.
Cifra, M; Pokorný, J; Havelka, D; Kucera, O
2010-05-01
Microtubules are electrically polar structures fulfilling prerequisites for generation of oscillatory electric field in the kHz to GHz region. Energy supply for excitation of elasto-electrical vibrations in microtubules may be provided from GTP-hydrolysis; motor protein-microtubule interactions; and energy efflux from mitochondria. We calculated electric field generated by axial longitudinal vibration modes of microtubules for random, and coherent excitation. In case of coherent excitation of vibrations, the electric field intensity is highest at the end of microtubule. The dielectrophoretic force exerted by electric field on the surrounding molecules will influence the kinetics of microtubule polymerization via change in the probability of the transport of charge and mass particles. The electric field generated by vibrations of electrically polar cellular structures is expected to play an important role in biological self-organization. 2010 Elsevier Ireland Ltd. All rights reserved.
Vibrational spectra and DFT calculations of sonderianin diterpene
Oliveira, I. M. M.; Santos, H. S.; Sena, D. M.; Cruz, B. G.; Teixeira, A. M. R.; Freire, P. T. C.; Braz-Filho, R.; Sousa, J. W.; Albuquerque, M. R. J. R.; Bandeira, P. N.; Bernardino, A. C. S. S.; Gusmão, G. O. M.; Bento, R. R. F.
2015-11-01
In the present study, the natural product sonderianin diterpene (C21H26O4), a diterpenoid isolated from Croton blanchetianus, with potential application in the drug industry, was characterized by nuclear magnetic resonance, infrared and Raman spectroscopy. Vibrational spectra were supported by Density Functional Theory calculations. Infrared and Raman spectra of sonderianin were recorded at ambient temperature in the regions from 400 cm-1 to 3600 cm-1 and from 40 cm-1 to 3500 cm-1, respectively. DFT calculations with the hybrid functional B3LYP and the basis set 6-31 G(d,p) were performed with the purpose of obtaining information on the structural and vibrational properties of this organic compound. A comparison with experimental spectra allowed us to assign all of the normal modes of the crystal. The assignment of the normal modes was carried out by means of potential energy distribution.
Analytical calculation of vibrations of electromagnetic origin in electrical machines
McCloskey, Alex; Arrasate, Xabier; Hernández, Xabier; Gómez, Iratxo; Almandoz, Gaizka
2018-01-01
Electrical motors are widely used and are often required to satisfy comfort specifications. Thus, vibration response estimations are necessary to reach optimum machine designs. This work presents an improved analytical model to calculate vibration response of an electrical machine. The stator and windings are modelled as a double circular cylindrical shell. As the stator is a laminated structure, orthotropic properties are applied to it. The values of those material properties are calculated according to the characteristics of the motor and the known material properties taken from previous works. Therefore, the model proposed takes into account the axial direction, so that length is considered, and also the contribution of windings, which differs from one machine to another. These aspects make the model valuable for a wide range of electrical motor types. In order to validate the analytical calculation, natural frequencies are calculated and compared to those obtained by Finite Element Method (FEM), giving relative errors below 10% for several circumferential and axial mode order combinations. It is also validated the analytical vibration calculation with acceleration measurements in a real machine. The comparison shows good agreement for the proposed model, being the most important frequency components in the same magnitude order. A simplified two dimensional model is also applied and the results obtained are not so satisfactory.
Calculated low-energy electron-impact vibrational excitation cross sections for CO2 molecule
Laporta, V; Celiberto, R
2016-01-01
Vibrational-excitation cross sections of ground electronic state of carbon dioxide molecule by electron-impact through the CO2-(2\\Pi) shape resonance is considered in the separation of the normal modes approximation. Resonance curves and widths are computed for each vibrational mode. The calculations assume decoupling between normal modes and employ the local complex potential model for the treatment of the nuclear dynamics, usually adopted for the electron-scattering involving diatomic molecules. Results are presented for excitation up to 10 vibrational levels in each mode and comparison with data present in the literature is discussed.
Function generator for synthesizing complex vibration mode patterns
Naumann, E. C.; Hagood, G. J., Jr. (Inventor)
1973-01-01
A simple highly flexible device for synthesizing complex vibration mode patterns is described. These mode patterns can be used to identify vibration mode data. This device sums selected sine and cosine functions and then plots the sum against a linear function.
Heavy atom vibrational modes and low-energy vibrational autodetachment in nitromethane anions
Energy Technology Data Exchange (ETDEWEB)
Thompson, Michael C.; Weber, J. Mathias, E-mail: weberjm@jila.colorado.edu [JILA, University of Colorado at Boulder, 440 UCB, Boulder, Colorado 80309-0440 (United States); Department of Chemistry and Biochemistry, University of Colorado at Boulder, 215UCB, Boulder, Colorado 80309-0215 (United States); Baraban, Joshua H. [Department of Chemistry and Biochemistry, University of Colorado at Boulder, 215UCB, Boulder, Colorado 80309-0215 (United States); Matthews, Devin A. [Institute for Computational Engineering and Science, University of Texas at Austin, 201 E. 24th St., Austin, Texas 78712 (United States); Stanton, John F. [Department of Chemistry and Biochemistry, University of Texas at Austin, 1 University Station A5300, Austin, Texas 78712-0165 (United States)
2015-06-21
We report infrared spectra of nitromethane anion, CH{sub 3}NO{sub 2}{sup −}, in the region 700–2150 cm{sup −1}, obtained by Ar predissociation spectroscopy and electron detachment spectroscopy. The data are interpreted in the framework of second-order vibrational perturbation theory based on coupled-cluster electronic structure calculations. The modes in the spectroscopic region studied here are mainly based on vibrations involving the heavier atoms; this work complements earlier studies on nitromethane anion that focused on the CH stretching region of the spectrum. Electron detachment begins at photon energies far below the adiabatic electron affinity due to thermal population of excited vibrational states.
Hydrogen local vibrational modes in semiconductors
Energy Technology Data Exchange (ETDEWEB)
McCluskey, Matthew D. [Univ. of California, Berkeley, CA (United States). Dept. of Physics
1997-06-01
Following, a review of experimental techniques, theory, and previous work, the results of local vibrational mode (LVM) spectroscopy on hydrogen-related complexes in several different semiconductors are discussed. Hydrogen is introduced either by annealing in a hydrogen ambient. exposure to a hydrogen plasma, or during growth. The hydrogen passivates donors and acceptors in semiconductors, forming neutral complexes. When deuterium is substituted for hydrogen. the frequency of the LVM decreases by approximately the square root of two. By varying the temperature and pressure of the samples, the microscopic structures of hydrogen-related complexes are determined. For group II acceptor-hydrogen complexes in GaAs, InP, and GaP, hydrogen binds to the host anion in a bond-centered orientation, along the [111] direction, adjacent to the acceptor. The temperature dependent shift of the LVMs are proportional to the lattice thermal energy U(T), a consequence of anharmonic coupling between the LVM and acoustical phonons. In the wide band gap semiconductor ZnSe, epilayers grown by metalorganic chemical vapor phase epitaxy (MOCVD) and doped with As form As-H complexes. The hydrogen assumes a bond-centered orientation, adjacent to a host Zn. In AlSb, the DX centers Se and Te are passivated by hydrogen. The second, third, and fourth harmonics of the wag modes are observed. Although the Se-D complex has only one stretch mode, the Se-H stretch mode splits into three peaks. The anomalous splitting is explained by a new interaction between the stretch LVM and multi-phonon modes of the lattice. As the temperature or pressure is varied, and anti-crossing is observed between LVM and phonon modes.
Energy Technology Data Exchange (ETDEWEB)
Tarana, Michal [Department of Physics and Astronomy, University of Nebraska, Lincoln, Nebraska 68588 (United States); JILA, University of Colorado and NIST, Boulder, Colorado 80309-0440 (United States); Houfek, Karel; Horacek, Jiri [Institute of Theoretical Physics, Faculty of Mathematics and Physics, Charles University in Prague, V Holesovickach 2, Prague (Czech Republic); Fabrikant, Ilya I. [Department of Physics and Astronomy, University of Nebraska, Lincoln, Nebraska 68588 (United States); Department of Physics and Astronomy, Open University, Walton Hall, Milton Keynes MK7 6AA (United Kingdom)
2011-11-15
We present a study of dissociative electron attachment and vibrational excitation processes in electron collisions with the CF{sub 3}Cl molecule. The calculations are based on the two-dimensional nuclear dynamics including the C-Cl symmetric stretch coordinate and the CF{sub 3} symmetric deformation (umbrella) coordinate. The complex potential energy surfaces are calculated using the ab initio R-matrix method. The results for dissociative attachment and vibrational excitation of the umbrella mode agree quite well with experiment whereas the cross section for excitation of the C-Cl symmetric stretch vibrations is about a factor-of-three too low in comparison with experimental data.
Precise Ab-initio prediction of terahertz vibrational modes in crystalline systems
DEFF Research Database (Denmark)
Jepsen, Peter Uhd; Clark, Stewart J.
2007-01-01
We use a combination of experimental THz time-domain spectroscopy and ab-initio density functional perturbative theory to accurately predict the terahertz vibrational spectrum of molecules in the crystalline phase. Our calculations show that distinct vibrational modes found in solid-state materials...
Mode Calculation and Testing of a Car Body in White
Directory of Open Access Journals (Sweden)
Ying Yang
2011-01-01
Full Text Available The dynamic parameters of a car body in white (BIW are important during a new car developing. Based on the finite element method, the model of a BIW is developed in which the welding points are treated specially as a new element type and the vibration modes of it are calculated. In modal testing, a fixed sine-sweeping exciter is used to conduct a single-point input force for the structure, whereas the output responses are picked up at different points to identify modes. The obtained modes are coincided both with the FE results and the practical testing.
Inhibiting multiple mode vibration in controlled flexible systems
Hyde, James M.; Chang, Kenneth W.; Seering, Warren P.
1991-01-01
Viewgraphs on inhibiting multiple mode vibration in controlled flexible systems are presented. Topics covered include: input pre-shaping background; developing multiple-mode shapers; Middeck Active Control Experiment (MACE) test article; and tests and results.
Calculation of the vibrational properties of LiMgAs.
Mellouki, A; Bennecer, B; Kalarasse, F
2009-07-29
We have studied the vibrational properties of the filled tetrahedral semiconductor LiMgAs and its binary analog AlAs by using the plane-wave pseudopotential method within density functional theory. The calculated lattice constants for the studied compounds are in good agreement with previous theoretical and experimental results. The phonon dispersion curves and phonon density of states are calculated by using density functional perturbation theory. The sound speeds in different directions are quantitatively similar in LiMgAs and AlAs. The assignment of the zone center modes to the relative motion of the atoms shows that the lower optic modes are due to the Mg-As pair vibrations, while for the upper ones the Li-Mg pair dominates, which is attributed to the smaller Mg atom mass. The longitudinal interatomic force constant of Mg-As is about 66% higher than that of Li-As, showing the relatively high covalency of the former bond.
Calculation of the vibrational properties of LiMgAs
Energy Technology Data Exchange (ETDEWEB)
Mellouki, A; Bennecer, B; Kalarasse, F, E-mail: b_bennacer@hotmail.co [Physics Laboratory at Guelma, Faculty of Science and Engineering, University of Guelma, PO Box 401, Guelma 24000 (Algeria)
2009-07-29
We have studied the vibrational properties of the filled tetrahedral semiconductor LiMgAs and its binary analog AlAs by using the plane-wave pseudopotential method within density functional theory. The calculated lattice constants for the studied compounds are in good agreement with previous theoretical and experimental results. The phonon dispersion curves and phonon density of states are calculated by using density functional perturbation theory. The sound speeds in different directions are quantitatively similar in LiMgAs and AlAs. The assignment of the zone center modes to the relative motion of the atoms shows that the lower optic modes are due to the Mg-As pair vibrations, while for the upper ones the Li-Mg pair dominates, which is attributed to the smaller Mg atom mass. The longitudinal interatomic force constant of Mg-As is about 66% higher than that of Li-As, showing the relatively high covalency of the former bond.
Vibrational spectroscopy and DFT calculations of flavonoid derriobtusone A
Marques, A. N. L.; Mendes Filho, J.; Freire, P. T. C.; Santos, H. S.; Albuquerque, M. R. J. R.; Bandeira, P. N.; Leite, R. V.; Braz-Filho, R.; Gusmão, G. O. M.; Nogueira, C. E. S.; Teixeira, A. M. R.
2017-02-01
Flavonoids are secondary metabolites of plants which perform various functions. One subclass of flavonoid is auronol that can present immunostimulating activity. In this work Fourier-Transform Infrared with Attenuated Total Reflectance (FTIR-ATR) and Fourier-Transform Raman (FT-Raman) spectra of an auronol, derriobtusone A (C18H12O4), were obtained at room temperature. Theoretical calculations using Density Functional Theory (DFT) were performed in order to assign the normal modes and to interpret the spectra of the derriobtusone A molecule. The FTIR-ATR and FT-Raman spectra of the crystal, were recorded at room temperature in the regions 600 cm-1 to 4000 cm-1 and 40 cm-1 to 4000 cm-1, respectively. The normal modes of vibrations were obtained using Density Functional Theory with B3LYP functional and 6-31G+ (d,p) basis set. The calculated frequencies are in good agreement with those obtained experimentally. Detailed assignments of the normal modes present in both the Fourier-Transform infrared and the Fourier-Transform Raman spectra of the crystal are given.
Computation of expectation values from vibrational coupled-cluster at the two-mode coupling level
DEFF Research Database (Denmark)
Zoccante, Alberto; Seidler, Peter; Christiansen, Ove
2011-01-01
In this work we show how the vibrational coupled-cluster method at the two-mode coupling level can be used to calculate zero-point vibrational averages of properties. A technique is presented, where any expectation value can be calculated using a single set of Lagrangian multipliers computed...... solving iteratively a single linear set of equations. Sample calculations are presented which show that the resulting algorithm scales only with the third power of the number of modes, therefore making large systems accessible. Moreover, we present applications to water, pyrrole, and para-nitroaniline....
Sortur, Veenasangeeta; Yenagi, Jayashree; Tonannavar, J; Jadhav, V B; Kulkarni, M V
2008-11-15
Infrared (4000-400 cm(-1)) and Raman (3500-50 cm(-1)) spectral measurements have been made for the solid sample of 7-methyl-4-bromomethylcoumarin. Electronic structure calculations at RHF/6-31G* and B3LYP/6-31G* levels of theory have been performed, giving equilibrium geometries, harmonic vibrational spectra and normal modes. Different orientations of bromomethyl group have yielded only two conformers, of which the most stable one lying lower from the other conformer by approximately 7.99 kJ/mol, is non-planar with no symmetry. A complete assignment of the vibrational modes, aided by the calculations, has been proposed. Coupled vibrations are manifest in many modes. Some spectral features, compared to 6-methyl-4-bromomethylcoumarin, show changes across both IR and Raman spectra, involving mainly skeletal vibrations, and to a lesser degree, methyl and bromomethyl vibrations. Low-frequency vibrations below 150 cm(-1) are assigned to lattice modes.
Ultrafast Dynamics of Vibration-Cavity Polariton Modes
Owrutsky, Jeff; Dunkelberger, Adam; Fears, Kenan; Simpkins, Blake; Spann, Bryan
Vibrational modes of polymers, liquids, and solvated compounds can couple to Fabry-Perot optical cavity modes, creating vibration-cavity polariton modes whose energy tunes with the cavity length and incidence angle. Here we report the pump-probe infrared spectroscopy of vibration-cavity polaritons in cavity-coupled W(CO)6. At very early times, we observe quantum beating between the two polariton states find an anomalously low degree of excitation. After the quantum beating, we directly observe spectroscopic signatures of excited-state absorption from both polariton modes and uncoupled reservoir modes. An analytical expression for cavity transmission reproduces these signatures. The upper polariton mode relaxes ten times more quickly than the uncoupled vibrational mode and the polariton lifetime depends on the angle of incidence of the infrared pulses. Coupling to an optical cavity gives a means of control of the lifetime of vibration-cavity polaritons and could have important implications for chemical reactivity in vibrationally excited molecules.
Energy Technology Data Exchange (ETDEWEB)
Lindenmaier, Rodica; Scharko, Nicole K.; Tonkyn, Russell G.; Nguyen, Kiet T.; Williams, Stephen D.; Johnson, Timothy J.
2017-07-25
Xylenes contain a blend of the ortho-, meta-, and para- isomers, and all are abundant contaminants in the ground, surface waters, and air. To better characterize xylene and to better enable its detection, we report high quality quantitative vapor-phase infrared spectra of all three isomers over the 540-6500 cm^{-1} range. All fundamental vibrational modes are assigned based on these vapor-phase infrared spectra, liquid-phase infrared and Raman spectra, along with density functional theory (DFT), ab initio MP2 and high energy-accuracy compound theoretical model (W1BD) calculations. Both MP2 and DFT predict a single conformer with C_{2v} symmetry for ortho-xylene, and two conformers each for meta- and para-xylene, depending on the preferred orientations of the methyl groups. For meta-xylene the two conformers have C_{s} and C_{2} symmetry, and for para-xylene these conformers have C_{2v} or C_{2h} symmetry. Since the relative population of the two conformers is approximately 50% for both isomers and predicted frequencies and intensities are very similar for each conformer, we made an arbitrary choice to discuss the C_{s} conformer for meta-xylene and the C_{2v} conformer for para-xylene. We report integrated band intensities for all isomers. Using the quantitative infrared data, we determine the global warming potential values of each isomer and discuss potential bands for atmospheric monitoring.
Computing Vibration-Mode Matrices From Finite-Element Output
Levy, Roy
1993-01-01
Postprocessing algorithms devised to facilitate vibrational-mode analyses of dynamics of complicated structures. Yields inertia matrices and elastic/rigid-coupling matrices. Such analyses important in simulation and control in active suppression of vibrations in large building or in precise aiming of large antenna.
selective excitation of vibrational modes of polyatomic molecule
Indian Academy of Sciences (India)
Abstract. Mode-selective dynamics of triatomic molecule in the electronic ground state under continuous wave laser pulse is investigated for the discrete vibrational bound states. A non-perturbative approach has been used to analyse the vibrational couplings and dynamics of the molecule. Keywords. Polyatomic molecule ...
Automobile Road Vibration Reproduction using Sliding Modes
Monsees, G.; Scherpen, J.M.A.
2001-01-01
Sliding mode controllers have a reputation for their robustness against parameter variations, modeling errors and disturbances. They have been successfully applied in several practical situations which demonstrated the potential of sliding mode control for other control problems. However research
Single-molecule electronics: Cooling individual vibrational modes by the tunneling current.
Lykkebo, Jacob; Romano, Giuseppe; Gagliardi, Alessio; Pecchia, Alessandro; Solomon, Gemma C
2016-03-21
Electronic devices composed of single molecules constitute the ultimate limit in the continued downscaling of electronic components. A key challenge for single-molecule electronics is to control the temperature of these junctions. Controlling heating and cooling effects in individual vibrational modes can, in principle, be utilized to increase stability of single-molecule junctions under bias, to pump energy into particular vibrational modes to perform current-induced reactions, or to increase the resolution in inelastic electron tunneling spectroscopy by controlling the life-times of phonons in a molecule by suppressing absorption and external dissipation processes. Under bias the current and the molecule exchange energy, which typically results in heating of the molecule. However, the opposite process is also possible, where energy is extracted from the molecule by the tunneling current. Designing a molecular "heat sink" where a particular vibrational mode funnels heat out of the molecule and into the leads would be very desirable. It is even possible to imagine how the vibrational energy of the other vibrational modes could be funneled into the "cooling mode," given the right molecular design. Previous efforts to understand heating and cooling mechanisms in single molecule junctions have primarily been concerned with small models, where it is unclear which molecular systems they correspond to. In this paper, our focus is on suppressing heating and obtaining current-induced cooling in certain vibrational modes. Strategies for cooling vibrational modes in single-molecule junctions are presented, together with atomistic calculations based on those strategies. Cooling and reduced heating are observed for two different cooling schemes in calculations of atomistic single-molecule junctions.
Broadband vibration energy harvester utilizing three out-of-plane modes of one vibrating body
Park, Shi-Baek; Jang, Seon-Jun; Kim, In-Ho; Choi, Yong Je
2017-10-01
In this paper, we introduce the concept, design equation, and realization of a broadband electromagnetic vibrational energy harvester. The spatial vibrating system in the proposed harvester is arranged to have three out-of-plane vibration modes. We devise the design method for its three natural frequencies and accompanying modes and apply it to the broadband energy harvesting by locating three frequencies close to each other. The numerical simulation and the experimental results show that it satisfies the designated frequencies as well as the enhanced bandwidth for power generation.
Fundamental vibrational mode in a highly inhomogeneous star
Bastrukov, S. I.; Chang, H. -K.; Wu, E. -H.; Molodtsova, I. V.
2008-01-01
The eigenfrequency problem of fundamental vibrational mode in a highly inhomogeneous star, modeled by self-gravitating mass of viscous liquid with singular density at the center, is considered in juxtaposition with that for Kelvin fundamental mode in the liquid star model with uniform density. Particular attention is given to the difference between spectral equations for the frequency and lifetime of f-mode in the singular and homogeneous star models. The newly obtained results are discussed ...
Electron-Beam Mapping of Vibrational Modes with Nanometer Spatial Resolution.
Dwyer, C; Aoki, T; Rez, P; Chang, S L Y; Lovejoy, T C; Krivanek, O L
2016-12-16
We demonstrate that a focused beam of high-energy electrons can be used to map the vibrational modes of a material with a spatial resolution of the order of one nanometer. Our demonstration is performed on boron nitride, a polar dielectric which gives rise to both localized and delocalized electron-vibrational scattering, either of which can be selected in our off-axial experimental geometry. Our experimental results are well supported by our calculations, and should reconcile current controversy regarding the spatial resolution achievable in vibrational mapping with focused electron beams.
Mode selection of modal expansion method estimating vibration field of washing machine
Jung, B. K.; Jeong, W. B.
2015-03-01
This paper is about a study estimating the vibration and radiated noise of a washing machine by using a mode selection-applied modal expansion method (MEM). MEM is a technique that identifies the vibration field from a portion of eigenvectors (or mode shapes) of a structure, and thus, the selection of the eigenvectors has a big impact on the vibration results identified. However, there have been few studies about selecting the eigenvectors with respect to the structural vibration and radiated noise estimation. Accordingly, this paper proposes the use of a new mode selection method to identify the vibration based on the MEM and then calculate radiated noise of a washing machine. The results gained from the experiment were also compared. The vibration and noise results of numerical analysis using the proposed selection method are in line with the measured results. The selection method proposed in this paper corresponds well with the MEM and this process seems to be applicable to the estimation of various structure vibrations and radiated noise.
Drift Mode Calculations in Nonaxisymmetric Geometry
Energy Technology Data Exchange (ETDEWEB)
G. Rewoldt; L.-P. Ku; W.A. Cooper; W.M. Tang
1999-07-01
A fully kinetic assessment of the stability properties of toroidal drift modes has been obtained for nonaxisymmetric (stellarator) geometry, in the electrostatic limit. This calculation is a comprehensive solution of the linearized gyrokinetic equation, using the lowest-order ''ballooning representation'' for high toroidal mode number instabilities, with a model collision operator. Results for toroidal drift waves destabilized by temperature gradients and/or trapped particle dynamics are presented, using three-dimensional magnetohydrodynamic equilibria generated as part of a design effort for a quasiaxisymmetric stellarator. Comparisons of these results with those obtained for typical tokamak cases indicate that the basic trends are similar.
Finite-temperature hydrogen adsorption and desorption thermodynamics driven by soft vibration modes.
Woo, Sung-Jae; Lee, Eui-Sup; Yoon, Mina; Kim, Yong-Hyun
2013-08-09
It has been widely accepted that enhanced dihydrogen adsorption is required for room-temperature hydrogen storage on nanostructured porous materials. Here we report, based on results of first-principles total energy and vibrational spectrum calculations, finite-temperature adsorption and desorption thermodynamics of hydrogen molecules that are adsorbed on the metal center of metal-porphyrin-incorporated graphene. We have revealed that the room-temperature hydrogen storage is achievable not only with the enhanced adsorption enthalpy, but also with soft-mode driven vibrational entropy of the adsorbed dihydrogen molecule. The soft vibration modes mostly result from multiple orbital coupling between the hydrogen molecule and the buckled metal center, for example, in Ca-porphyrin-incorporated graphene. Our study suggests that the current design strategy for room-temperature hydrogen storage materials should be modified with explicitly taking the finite-temperature vibration thermodynamics into account.
Vibrational spectra, theoretical calculations, and structure of 4-silaspiro(3,3)heptane.
Ocola, Esther J; Medders, Cross; Cooke, Joel M; Laane, Jaan
2014-09-15
Theoretical computations have been carried out for 4-silaspiro(3,3)heptane (SSH) in order to calculate its structure and vibrational spectra. SSH was found to have two puckered four-membered rings with dihedral angles of 34.2° and a tilt angle of 9.4° between the two rings. The puckering and tilting reduce the D2d symmetry to C2. Nonetheless, the vibrational assignments can be done quite well on the basis of D2d symmetry. This is confirmed by the fact that all but the lowest E vibrations show insignificant splitting into A and B modes of C2 symmetry. However, the observed splittings of the lowest frequency modes do confirm the lower conformational symmetry. The calculated infrared and Raman spectra were compared to the experimental spectra collected for the vapor, liquid, and solid states, and the agreement is excellent. Copyright © 2014 Elsevier B.V. All rights reserved.
Vibrational spectra, theoretical calculations, and structure of 4-silaspiro(3,3)heptane
Ocola, Esther J.; Medders, Cross; Cooke, Joel M.; Laane, Jaan
2014-09-01
Theoretical computations have been carried out for 4-silaspiro(3,3)heptane (SSH) in order to calculate its structure and vibrational spectra. SSH was found to have two puckered four-membered rings with dihedral angles of 34.2° and a tilt angle of 9.4° between the two rings. The puckering and tilting reduce the D2d symmetry to C2. Nonetheless, the vibrational assignments can be done quite well on the basis of D2d symmetry. This is confirmed by the fact that all but the lowest E vibrations show insignificant splitting into A and B modes of C2 symmetry. However, the observed splittings of the lowest frequency modes do confirm the lower conformational symmetry. The calculated infrared and Raman spectra were compared to the experimental spectra collected for the vapor, liquid, and solid states, and the agreement is excellent.
Tearing mode stability calculations with pressure flattening
Ham, C J; Cowley, S C; Hastie, R J; Hender, T C; Liu, Y Q
2013-01-01
Calculations of tearing mode stability in tokamaks split conveniently into an external region, where marginally stable ideal MHD is applicable, and a resonant layer around the rational surface where sophisticated kinetic physics is needed. These two regions are coupled by the stability parameter. Pressure and current perturbations localized around the rational surface alter the stability of tearing modes. Equations governing the changes in the external solution and - are derived for arbitrary perturbations in axisymmetric toroidal geometry. The relationship of - with and without pressure flattening is obtained analytically for four pressure flattening functions. Resistive MHD codes do not contain the appropriate layer physics and therefore cannot predict stability directly. They can, however, be used to calculate -. Existing methods (Ham et al. 2012 Plasma Phys. Control. Fusion 54 025009) for extracting - from resistive codes are unsatisfactory when there is a finite pressure gradient at the rational surface ...
Microscopic calculation of the restoring force for scissor isovector vibrations
Energy Technology Data Exchange (ETDEWEB)
Nojarov, R.; Bochnacki, Z.; Faessler, A.
1986-07-01
The restoring force for scissor isovector vibrations is calculated microscopically with the wave functions of an axially symmetric Woods-Saxon potential from a density-dependent symmetry energy. The experimental energies of the low-lying magnetic dipole states in rare-earth nuclei are well reproduced. It is found that only outer particles, which contribute to the nuclear moment of inertia, take part in this collective vibration. They are about half of the total number of nucleons.
Mapping vibrational surface and bulk modes in a single nanocube
Lagos, Maureen J.; Trügler, Andreas; Hohenester, Ulrich; Batson, Philip E.
2017-03-01
Imaging of vibrational excitations in and near nanostructures is essential for developing low-loss infrared nanophotonics, controlling heat transport in thermal nanodevices, inventing new thermoelectric materials and understanding nanoscale energy transport. Spatially resolved electron energy loss spectroscopy has previously been used to image plasmonic behaviour in nanostructures in an electron microscope, but hitherto it has not been possible to map vibrational modes directly in a single nanostructure, limiting our understanding of phonon coupling with photons and plasmons. Here we present spatial mapping of optical and acoustic, bulk and surface vibrational modes in magnesium oxide nanocubes using an atom-wide electron beam. We find that the energy and the symmetry of the surface polariton phonon modes depend on the size of the nanocubes, and that they are localized to the surfaces of the nanocube. We also observe a limiting of bulk phonon scattering in the presence of surface phonon modes. Most phonon spectroscopies are selectively sensitive to either surface or bulk excitations; therefore, by demonstrating the excitation of both bulk and surface vibrational modes using a single probe, our work represents advances in the detection and visualization of spatially confined surface and bulk phonons in nanostructures.
Huang, C H; Ma, C C
2001-07-01
The experimental measurement of the resonant frequencies for the piezoceramic material is generally performed by impedance analysis. In this paper, we employ an optical interferometry method called the amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) to investigate the vibration characteristics of piezoceramic/aluminum laminated plates. The AF-ESPI is a powerful tool for the full-field, noncontact, and real-time measurement method of surface displacement for vibrating bodies. As compared with the conventional film recording and optical reconstruction procedures used for holographic interferometry, the interferometric fringes of AF-ESPI are produced instantly by a video recording system. Because the clear fringe patterns measured by the AF-ESPI method will be shown only at resonant frequencies, both the resonant frequencies and corresponding vibration mode shapes are obtained experimentally at the same time. Excellent quality of the interferometric fringe patterns for both the in-plane and out-of-plane vibration mode shapes are demonstrated. Two different configurations of piezoceramic/aluminum laminated plates, which exhibit different vibration characteristics because of the polarization direction, are investigated in detail. From experimental results, we find that some of the out-of-plane vibration modes (Type A) with lower resonant frequencies cannot be measured by the impedance analysis; however, all of the vibration modes of piezoceramic/aluminum laminated plates can be obtained by the AF-ESPI method. Finally, the numerical finite element calculations are also performed, and the results are compared with the experimental measurements. Excellent agreements of the resonant frequencies and mode shapes are obtained for both results.
The diffraction signatures of individual vibrational modes in polyatomic molecules
Ryu, Seol; Weber, Peter M.; Stratt, Richard M.
2000-01-01
Though one normally thinks of single-molecule diffraction studies as tools for eliciting molecular geometry, molecular diffraction patterns are really the Fourier transforms of complete molecular wave functions. There is thus at least the possibility of imaging the vibrational wave functions of polyatomic molecules by means of a pump-probe diffraction experiment: the pump laser could prepare a specific vibrational state and an electron or x-ray could then be diffracted off the molecule some short time later. The present paper develops the general theory of diffraction signatures for individual vibrational wave functions in polyatomic molecules and investigates the feasibility of seeing such signatures experimentally using the example of a linear triatomic molecule modeled after CS2. Although aligned molecules in specific vibrational quantum states turn out to exhibit very characteristic diffraction signatures, the signatures of the vibrational wave functions are partially washed out for the complete isotropy expected from gas phase molecules. Nonetheless, it is possible to design a diffraction experiment using a pump-dump sequence with a polarized laser beam which will select a nonisotropic sample of vibrationally excited molecules. We show that the resulting level of anisotropy should enhance the diffraction signature, helping to distinguish different vibrational components. These model calculations therefore suggest the possibility of observing the dynamics of vibrational wave packets using experimentally realizable diffraction techniques.
Madsen, Niels Kristian; Godtliebsen, Ian H; Losilla, Sergio A; Christiansen, Ove
2018-01-14
A new implementation of vibrational coupled-cluster (VCC) theory is presented, where all amplitude tensors are represented in the canonical polyadic (CP) format. The CP-VCC algorithm solves the non-linear VCC equations without ever constructing the amplitudes or error vectors in full dimension but still formally includes the full parameter space of the VCC[n] model in question resulting in the same vibrational energies as the conventional method. In a previous publication, we have described the non-linear-equation solver for CP-VCC calculations. In this work, we discuss the general algorithm for evaluating VCC error vectors in CP format including the rank-reduction methods used during the summation of the many terms in the VCC amplitude equations. Benchmark calculations for studying the computational scaling and memory usage of the CP-VCC algorithm are performed on a set of molecules including thiadiazole and an array of polycyclic aromatic hydrocarbons. The results show that the reduced scaling and memory requirements of the CP-VCC algorithm allows for performing high-order VCC calculations on systems with up to 66 vibrational modes (anthracene), which indeed are not possible using the conventional VCC method. This paves the way for obtaining highly accurate vibrational spectra and properties of larger molecules.
Madsen, Niels Kristian; Godtliebsen, Ian H.; Losilla, Sergio A.; Christiansen, Ove
2018-01-01
A new implementation of vibrational coupled-cluster (VCC) theory is presented, where all amplitude tensors are represented in the canonical polyadic (CP) format. The CP-VCC algorithm solves the non-linear VCC equations without ever constructing the amplitudes or error vectors in full dimension but still formally includes the full parameter space of the VCC[n] model in question resulting in the same vibrational energies as the conventional method. In a previous publication, we have described the non-linear-equation solver for CP-VCC calculations. In this work, we discuss the general algorithm for evaluating VCC error vectors in CP format including the rank-reduction methods used during the summation of the many terms in the VCC amplitude equations. Benchmark calculations for studying the computational scaling and memory usage of the CP-VCC algorithm are performed on a set of molecules including thiadiazole and an array of polycyclic aromatic hydrocarbons. The results show that the reduced scaling and memory requirements of the CP-VCC algorithm allows for performing high-order VCC calculations on systems with up to 66 vibrational modes (anthracene), which indeed are not possible using the conventional VCC method. This paves the way for obtaining highly accurate vibrational spectra and properties of larger molecules.
CO laser photoacoustic spectra and vibrational modes of heroin ...
Indian Academy of Sciences (India)
Abstract. Heroin, morphine and narcotine are very large molecules having 50, 40 and 53 atoms respectively. Moderately high resolution photoacoustic (PA) spectra have been recorded in 9.6 µm and 10.6 µm regions of CO2 laser. It is very difficult to assign the modes of vibrations for PA bands by comparison with ...
laser photoacoustic spectra and vibrational modes of heroin ...
Indian Academy of Sciences (India)
Heroin, morphine and narcotine are very large molecules having 50, 40 and 53 atoms respectively. Moderately high resolution photoacoustic (PA) spectra have been recorded in 9.6 m and 10.6 m regions of CO2 laser. It is very difﬁcult to assign the modes of vibrations for PA bands by comparison with conventional low ...
Two-mode elliptical-core weighted fiber sensors for vibration analysis
Vengsarkar, Ashish M.; Murphy, Kent A.; Fogg, Brian R.; Miller, William V.; Greene, Jonathan A.; Claus, Richard O.
1992-01-01
Two-mode, elliptical-core optical fibers are demonstrated in weighted, distributed and selective vibration-mode-filtering applications. We show how appropriate placement of optical fibers on a vibrating structure can lead to vibration mode filtering. Selective vibration-mode suppression on the order of 10 dB has been obtained using tapered two-mode, circular-core fibers with tapering functions that match the second derivatives of the modes of vibration to be enhanced. We also demonstrate the use of chirped, two-mode gratings in fibers as spatial modal sensors that are equivalents of shaped piezoelectric sensors.
Yenagi, Jayashree; Shettar, Anita; Tonannavar, J
2011-09-01
FT-Infrared (4000-400 cm(-1)) and NIR-FT-Raman (4000-50 cm(-1)) spectral measurements have been made for 2-chloro- and 2-bromo-3-pyridinecarboxaldehydes. A DFT vibration analysis at B3LYP/6-311++G (d,p) level, valence force-fields and vibrational mode calculations have been performed. Aided by very good agreement between observed and computed vibration spectra, a complete assignment of fundamental vibration modes to the observed absorptions and Raman bands has been proposed. Orientations of the aldehydic group have produced two oblate asymmetric rotamers for each molecule, ON-trans and ON-cis: the ON-trans rotamer being more stable than cis by 3.42 kcal mol(-1) for 2-chloro-3-pyridinecarboxaldehyde and 3.68 kcal mol(-1) for 2-bromo-3-pyridinecarboxaldehyde. High potential energy barrier ca 14 kcal/mol, induced by steric hindrance, restricts rotamers' population to ON-trans only. It is observed that, in the presence of bromine, C-H stretching modes are pronounced; a missing characteristic ring mode in chlorine's presence shows at 1557 cm(-1); the characteristic ring mode at 1051 cm(-1) is diminished; a mixed mode near 707 cm(-1) is enhanced. Further, an observed doublet near 1696-1666 cm(-1) in both IR and Raman spectra is explained on the basis of Fermi resonance between aldehydic carbonyl stretching at 1696 cm(-1) and a combination mode of ring stretch near 1059 cm(-1) and deformation vibration, 625 cm(-1). A strong Raman aldehydic torsional mode at 62 cm(-1) is interpreted to correspond to the dominant ON-trans over cis rotamers population. Copyright © 2011 Elsevier B.V. All rights reserved.
Calculation of vibrational excitation cross-sections in resonant ...
Indian Academy of Sciences (India)
Home; Journals; Journal of Chemical Sciences; Volume 119; Issue 5. Calculation of vibrational excitation cross-sections in resonant electron-molecule scattering using the time-dependent wave packet (TDWP) approach with application to the 2 CO- shape resonance. Raman Kumar Singh Manabendra Sarma Ankit Jain ...
Optically active vibrational modes of PPV derivatives on textile substrate
Energy Technology Data Exchange (ETDEWEB)
Silva, M.A.T. da, E-mail: seaquinhos@uel.br [Departamento de Fisica, Universidade Estadual de Londrina-UEL, PR 445 Km 380, CP6001, CEP 86051-970 Londrina, Parana (Brazil); Dias, I.F.L. [Departamento de Fisica, Universidade Estadual de Londrina-UEL, PR 445 Km 380, CP6001, CEP 86051-970 Londrina, Parana (Brazil); Santos, E.P. dos; Martins, A.A. [Departamento de Fisica, Universidade Vale do Paraiba-UNIVAP, Avenida Shishima Hifumi, 2911, CEP 12244-000 Sao Jose dos Campos, Sao Paulo (Brazil); Duarte, J.L.; Laureto, E.; Reis, G.A. dos [Departamento de Fisica, Universidade Estadual de Londrina-UEL, PR 445 Km 380, CP6001, CEP 86051-970 Londrina, Parana (Brazil); Guimaraes, P.S.S.; Cury, L.A. [Departamento de Fisica, Instituto de Ciencias Exatas, Universidade Federal de Minas Gerais, C.P. 702, Belo Horizonte, CEP 30123-970 Minas Gerais (Brazil)
2013-02-15
In this work, MEH-PPV and BDMO-PPV films were deposited by spin-coating on 'dirty' textile substrates of canvas, nylon, canvas with resin, jeans and on glass and the temperature dependence of the optical properties of them was studied by photoluminescence and Raman (300 K) techniques. The temperature dependence of the energy, of the half line width at half height of the purely electronic peak, of the integrated PL intensity and of the Huang-Rhys factor, S=I{sub (01)}/I{sub (00)}, were obtained directly from the PL spectrum. For an analysis of the vibrational modes involved, Raman measurements were performed on substrates with and without polymers deposited and the results compared with those found in the literature. The films of MEH-PPV and BDMO-PPV showed optical properties similar to those films deposited on other substrates such as glass, metals, etc. It was observed an inversion of the first vibrational band in relation to the purely electronic peak with increasing temperature in the films deposited on nylon and canvas. The vibrational modes obtained by Raman were used to compose the simulation of the PL line shape of BDMO-PPV films on canvas and nylon, using a model proposed by Lin [29]. - Highlights: Black-Right-Pointing-Pointer MEH-PPV and BDMO-PPV films were deposited by spin-coating on dirty textile. Black-Right-Pointing-Pointer Their properties were studied by photoluminescence and Raman techniques. Black-Right-Pointing-Pointer We observed inversion of first vibrational band in relation to purely electronic peak. Black-Right-Pointing-Pointer Optically active vibrational modes of PPV derivatives were studied.
Thompson, Lee M; Lasoroski, Aurélie; Champion, Paul M; Sage, J Timothy; Frisch, Michael J; van Thor, Jasper J; Bearpark, Michael J
2014-02-11
A systematic comparison of different environmental effects on the vibrational modes of the 4-hydroxybenzylidene-2,3-dimethylimidazolinone (HBDI) chromophore using the ONIOM method allows us to model how the molecule's spectroscopic transitions are modified in the Green Fluorescent Protein (GFP). ONIOM(QM:MM) reduces the expense of normal mode calculations when computing the majority of second derivatives only at the MM level. New developments described here for the efficient solution of the CPHF equations, including contributions from electrostatic interactions with environment charges, mean that QM model systems of ∼100 atoms can be embedded within a much larger MM environment of ∼5000 atoms. The resulting vibrational normal modes, their associated frequencies, and dipole derivative vectors have been used to interpret experimental difference spectra (GFPI2-GFPA), chromophore vibrational Stark shifts, and changes in the difference between electronic and vibrational transition dipoles (mode angles) in the protein environment.
Keçeli, Murat; Hirata, So; Yagi, Kiyoshi
2010-07-21
The frequencies of the infrared- and/or Raman-active (k=0) vibrations of polyethylene and polyacetylene are computed by taking account of the anharmonicity in the potential energy surfaces (PESs) and the resulting phonon-phonon couplings explicitly. The electronic part of the calculations is based on Gaussian-basis-set crystalline orbital theory at the Hartree-Fock and second-order Møller-Plesset (MP2) perturbation levels, providing one-, two-, and/or three-dimensional slices of the PES (namely, using the so-called n-mode coupling approximation with n=3), which are in turn expanded in the fourth-order Taylor series with respect to the normal coordinates. The vibrational part uses the vibrational self-consistent field, vibrational MP2, and vibrational truncated configuration-interaction (VCI) methods within the Gamma approximation, which amounts to including only k=0 phonons. It is shown that accounting for both electron correlation and anharmonicity is essential in achieving good agreement (the mean and maximum absolute deviations less than 50 and 90 cm(-1), respectively, for polyethylene and polyacetylene) between computed and observed frequencies. The corresponding values for the calculations including only one of such effects are in excess of 120 and 300 cm(-1), respectively. The VCI calculations also reproduce semiquantitatively the frequency separation and intensity ratio of the Fermi doublet involving the nu(2)(0) fundamental and nu(8)(pi) first overtone in polyethylene.
Displacement of polarons by vibrational modes in doped conjugated polymers
Anderson, M.; Ramanan, C.; Fontanesi, C.; Frick, A.; Surana, S.; Cheyns, D.; Furno, M.; Keller, T.; Allard, S.; Scherf, U.; Beljonne, D.; D'Avino, G.; von Hauff, E.; Da Como, E.
2017-10-01
Organic pi-conjugated polymers are deemed to be soft materials with strong electron-phonon coupling, which results in the formation of polarons, i.e., charge carriers dressed by self-localized distortion of the nuclei. Universal signatures for polarons are optical resonances below the band gap and intense vibrational modes (IVMs), both found in the infrared (IR) spectral region. Here, we study p -doped conjugated homo- and copolymers by combining first-principles modelling and optical spectroscopy from the far-IR to the visible. Polaronic IVMs are found to feature absorption intensities comparable to purely electronic transitions and, most remarkably, show only loose resemblance to the Raman or IR-active modes of the neutral polymer. The IVM frequency is dramatically scaled down (up to 50%) compared to the backbone carbon-stretching modes in the pristine polymers. The very large intensity of IVMs is associated with displacement of the excess positive charge along the backbone driven by specific vibrational modes. We propose a quantitative picture for the identification of these polaron shifting modes that solely based on structural information, directly correlates with their IR intensity. This finding finally discloses the elusive microscopic mechanism behind the huge IR intensity of IVMs in doped polymeric semiconductors.
Piezoelectric nonlinear vibration focusing on the second-harmonic vibration mode.
Ozaki, Ryohei; Liu, Yaoyang; Hosaka, Hiroshi; Morita, Takeshi
2018-01-01
Resonant piezoelectric devices are driven under high power condition. In such condition, a nonlinear piezoelectric vibration becomes apparent and this nonlinearity should be taken into account in the design procedure using the finite elemental method (FEM). The purpose of this study is to introduce the nonlinear parameter to the FEM and to establish the method for measuring the nonlinear parameter through evaluating a nonlinear model for a piezoelectric vibration. In a previous study about the nonlinear piezoelectric vibration, the third term was mainly focused on because the third mode vibration affects the fundamental vibration in the case of a simple bar-type transducer. On the other hand, we considered the second nonlinear parameter of the compliance to the piezoelectric constitutive equation. We observed that this parameter affects the vibration amplitude with each position and the velocity at the tip of the transducer with a double frequency at resonant. It was confirmed that two measured nonlinear parameters based on these two relationships were almost same. From these values, we concluded that the proposed model is reasonable. Copyright © 2017. Published by Elsevier B.V.
H/sub 3/ /sup +/: Ab initio calculation of the vibration spectrum
Energy Technology Data Exchange (ETDEWEB)
Carney, G.D.; Porter, R.N.
1976-11-01
The vibration spectrum of H/sub 3/ /sup +/ is calculated from the representation of a previously reported (J. Chem Phys. 60, 4251 (1974)) ab initio potential-energy surface in a fifth degree Simons--Parr--Finlan (SPF) expansion. Morse- and harmonic-oscillator basis functions are used to describe the motions of the three oscillators and the Harris--Engerholm--Gwinn quadrature technique is used to obtain matrix elements of the Hamiltonian in the basis of vibrational configurations. Our variational method is thus analogous to configuration--interaction calculations for electronic states. The ground state is found to have a zero-point energy of 4345 cm/sup -1/ and a vibrationally averaged geometry of R/sub 1/=R/sub 2/=0.91396 A, theta=60.0012degree, where theta is the angle between the two equivalent bonds. The transition frequencies for the E and A/sub 1/ fundamentals are nu-bar/sub E/=2516 cm/sup -1/ and nu-bar/sub A/=3185 cm/sup -1/ and those for the corresponding first overtones of the bending mode are 2nu-bar/sub E/=5004 +- 4 cm/sup -1/ and 2nu-bar/sub A/=4799 cm/sup -1/. The first overtone of the breathing mode is 6264 cm/sup -1/. The first-excited A/sub 1/ vibration state is metastable with a dipole--radiation lifetime of 3 sec. Transition frequencies, Einstein coefficients, and lifetimes are reported for a total of 21 transitions. Analysis of results for Dunham number and normal-coordinate expansions in comparison with those for SPF expansion show the latter to be superior for ab initio vibrational calculations. A scheme for possible direct measurement of the fundamental A/sub 1/ and E vibrational bands is suggested. (AIP)
Zhao, Libo; Hu, Yingjie; Wang, Tongdong; Ding, Jianjun; Liu, Xixiang; Zhao, Yulong; Jiang, Zhuangde
2016-06-06
Methods to calculate fluid density and viscosity using a micro-cantilever and based on the resonance principle were put forward. Their measuring mechanisms were analyzed and the theoretical equations to calculate the density and viscosity were deduced. The fluid-solid coupling simulations were completed for the micro-cantilevers with different shapes. The sensing chips with micro-cantilevers were designed based on the simulation results and fabricated using the micro electromechanical systems (MEMS) technology. Finally, the MEMS resonant sensor was packaged with the sensing chip to measure the densities and viscosities of eight different fluids under the flexural and torsional vibrating modes separately. The relative errors of the measured densities from 600 kg/m³ to 900 kg/m³ and viscosities from 200 μPa·s to 1000 μPa·s were calculated and analyzed with different microcantilevers under various vibrating modes. The experimental results showed that the effects of the shape and vibrating mode of micro-cantilever on the measurement accuracies of fluid density and viscosity were analyzed in detail.
Directory of Open Access Journals (Sweden)
Libo Zhao
2016-06-01
Full Text Available Methods to calculate fluid density and viscosity using a micro-cantilever and based on the resonance principle were put forward. Their measuring mechanisms were analyzed and the theoretical equations to calculate the density and viscosity were deduced. The fluid-solid coupling simulations were completed for the micro-cantilevers with different shapes. The sensing chips with micro-cantilevers were designed based on the simulation results and fabricated using the micro electromechanical systems (MEMS technology. Finally, the MEMS resonant sensor was packaged with the sensing chip to measure the densities and viscosities of eight different fluids under the flexural and torsional vibrating modes separately. The relative errors of the measured densities from 600 kg/m3 to 900 kg/m3 and viscosities from 200 μPa·s to 1000 μPa·s were calculated and analyzed with different microcantilevers under various vibrating modes. The experimental results showed that the effects of the shape and vibrating mode of micro-cantilever on the measurement accuracies of fluid density and viscosity were analyzed in detail.
Al-Jallal, Nada A.; El-Azhary, Adel A.
2017-09-01
We report for the first time a detailed vibrational analysis of dibenzo-18-crown-6, db18c6. The experimental IR and Raman spectra of db18c6 were measured. The assignment of the fundamental vibrational frequencies of db18c6 was aided by using scaled quantum mechanical force fields calculated at the B3LYP/6-311G** and CAM-B3LYP/6-311G** levels. Comparison between the experimental and calculated spectra of some of the important conformations of db18c6 led to the conclusion that db18c6 in the solid phase exists in a C2 conformation that is similar to that predicted by X-ray, for also the solid phase. The effect of inclusion of the atom pair-wise dispersion correction to the B3LYP method, known as the B3LYP-D3 method, on the calculated IR and Raman spectra of db18c6 at the B3LYP level was also investigated. It was concluded that the effect of inclusion of the dispersion correction on the calculated vibrational frequencies and intensities is negligible.
Site-selective detection of vibrational modes of an iron atom in a trinuclear complex
Energy Technology Data Exchange (ETDEWEB)
Faus, Isabelle, E-mail: faus@rhrk.uni-kl.de; Rackwitz, Sergej; Wolny, Juliusz A. [University of Kaiserslautern, Department of Physics (Germany); Banerjee, Atanu; Kelm, Harald; Krüger, Hans-Jörg [University of Kaiserslautern, Department of Chemistry (Germany); Schlage, Kai; Wille, Hans-Christian [DESY, PETRA III, P01 (Germany); Schünemann, Volker [University of Kaiserslautern, Department of Physics (Germany)
2016-12-15
Nuclear inelastic scattering (NIS) experiments on the trinuclear complex [{sup 57}Fe{L-N_4(CH_2Fc)_2} (CH{sub 3}CN){sub 2}](ClO{sub 4}){sub 2} have been performed. The octahedral iron ion in the complex was labelled with {sup 57}Fe and thereby exclusively the vibrational modes of this iron ion have been detected with NIS. The analysis of nuclear forward scattering (NFS) data yields a ferrous low-spin state for the {sup 57}Fe labelled iron ion. The simulation of the partial density of states (pDOS) for the octahedral low-spin iron(II) ion of the complex by density functional theory (DFT) calculations is in excellent agreement with the experimental pDOS of the complex determined from the NIS data obtained at 80 K. Thereby it was possible to assign almost each of the experimentally observed NIS bands to the corresponding molecular vibrational modes.
Pitsevich, G. A.; Kostopravova, A. V.; Umreiko, D. S.; Ksenofontov, M. A.
2011-11-01
A technique was suggested to transform ab initio molecular force fields calculated using a set of independent vibrational coordinates into a form corresponding to a complete set of regundand coordinates and reflecting the molecular symmetry. Conditions necessary for the appropriate transformations to be possible are formulated. The possibility of transforming the force field for the simplest fragment containing regundand coordinates was demonstrated using ethylene as an example.
Comparison of different ultrasonic vibration modes for post removal.
Braga, Neilor Mateus Antunes; Silva, Juliana Monteiro da; Carvalho-Júnior, Jacy Ribeiro de; Ferreira, Raquel Conceição; Saquy, Paulo César; Brito-Júnior, Manoel
2012-01-01
This in vitro study compared different ultrasonic vibration modes for intraradicular cast post removal. The crowns of 24 maxillary canines were removed, the roots were embedded in acrylic resin blocks, and the canals were treated endodontically. The post holes were prepared and root canal impressions were taken with self-cured resin acrylic. After casting, the posts were cemented with zinc phosphate cement. The samples were randomly distributed into 3 groups (n=8): G1: no ultrasonic vibration (control); G2: tip of the ultrasonic device positioned perpendicularly to core surface and close to the incisal edge; and G3: tip of the ultrasonic device positioned perpendicularly to core surface at cervical region, close to the line of cementation. An Enac OE-5 ultrasound unit with an ST-09 tip was used. All samples were submitted to the tensile test using an universal testing machine at a crosshead speed of 1 mm/min. Data were subjected to one-way ANOVA and Tukey's post-hoc tests (α=0.05). Mean values of the load to dislodge the posts (MPa) were: G1 = 4.6 (± 1.4) A; G2 = 2.8 (± 0.9) B, and G3= 0.9 (± 0.3) C. Therefore, the ultrasonic vibration applied with the tip of device close to the core's cervical area showed higher ability to reduce the retention of cast post to root canal.
Subfemtosecond steering of hydrocarbon deprotonation through superposition of vibrational modes
Alnaser, A. S.; Kübel, M.; Siemering, R.; Bergues, B.; Kling, Nora G.; Betsch, K. J.; Deng, Y.; Schmidt, J.; Alahmed, Z. A.; Azzeer, A. M.; Ullrich, J.; Ben-Itzhak, I.; Moshammer, R.; Kleineberg, U.; Krausz, F.; de Vivie-Riedle, R.; Kling, M. F.
2014-05-01
Subfemtosecond control of the breaking and making of chemical bonds in polyatomic molecules is poised to open new pathways for the laser-driven synthesis of chemical products. The break-up of the C-H bond in hydrocarbons is an ubiquitous process during laser-induced dissociation. While the yield of the deprotonation of hydrocarbons has been successfully manipulated in recent studies, full control of the reaction would also require a directional control (that is, which C-H bond is broken). Here, we demonstrate steering of deprotonation from symmetric acetylene molecules on subfemtosecond timescales before the break-up of the molecular dication. On the basis of quantum mechanical calculations, the experimental results are interpreted in terms of a novel subfemtosecond control mechanism involving non-resonant excitation and superposition of vibrational degrees of freedom. This mechanism permits control over the directionality of chemical reactions via vibrational excitation on timescales defined by the subcycle evolution of the laser waveform.
New solid forms of efavirenz: Synthesis, vibrational spectroscopy and quantum chemical calculations
Marques, Marcelo M.; Rezende, Carlos A.; Lima, Gabriel C.; Marques, Andressa C. S.; Prado, Lívia D.; Leal, Kátia Z.; Rocha, Helvécio V. A.; Ferreira, Gláucio B.; Resende, Jackson A. L. C.
2017-06-01
Efavirenz,(S)-6-chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one, is an anti HIV agent from the class of the non-nucleoside inhibitors of the HIV-1 virus reverse transcriptase. This paper describes the synthesis of two new solvatomorphs of efavirenz (EFV). The results through XRPD and DSC/TG indicate that the new forms undergo a solvent loss over the days, and then return to the original polymorph. Structural and spectral characteristics of EFV were studied by vibrational spectroscopy and quantum chemical methods. Density functional theory (DFT) calculations for the potential energy curve, optimized geometries and vibrational spectra were carried out using 6-311 + G** basis sets and CAM-B3LYP functional, solid state calculations were also performed using DFT-XGGA (PBE-D3) exchange-correlation functional with the option of mixtures of Gaussian and plane waves method (GPW). Based on these results, the paper discussed the correlation between the vibrational modes and the crystalline structure of the most stable form of EFV. A complete analysis of the experimental infrared and Raman spectra was reported on the basis of the wavenumbers of the vibrational bands and the potential energy distribution.
Gribakin, G. F.; Stanton, J. F.; Danielson, J. R.; Natisin, M. R.; Surko, C. M.
2017-12-01
The dominant mechanism of low-energy positron annihilation in polyatomic molecules is through positron capture in vibrational Feshbach resonances (VFR). In this paper, we investigate theoretically the effect of anharmonic terms in the vibrational Hamiltonian on positron annihilation rates. Such interactions enable positron capture in VFRs associated with multiquantum vibrational excitations, leading to enhanced annihilation. Mode coupling can also lead to faster depopulation of VFRs, thereby reducing their contribution to the annihilation rates. To analyze this complex picture, we use coupled-cluster methods to calculate the anharmonic vibrational spectra and dipole transition amplitudes for chloroform, chloroform-d1, 1,1-dichloroethylene, and methanol, and use these data to compute positron resonant annihilation rates for these molecules. Theoretical predictions are compared with the annihilation rates measured as a function of incident positron energy. The results demonstrate the importance of mode coupling in both enhancement and suppression of the VFR. There is also experimental evidence for the direct excitation of multimode VFR. Their contribution is analyzed using a statistical approach, with an outlook towards more accurate treatment of this phenomenon.
Vibration modes of injured spine at resonant frequencies under vertical vibration.
Guo, Li-Xin; Zhang, Ming; Zhang, Yi-Min; Teo, Ee-Chon
2009-09-01
A detailed three-dimensional finite element model of the spine segment T12-Pelvis was developed to investigate dynamic characteristics of whole lumbar spine with injured cases. This study investigates the motion mechanism of the human lumbar spine and the effect of component injuries on adjacent spinal components under whole body vibration. Several investigations have analyzed the influence of injured spines on adjacent spinal components under static loadings. However, it is not clear how the spine injury affects dynamic characteristics of whole lumbar spine and adjacent components of the injured segment under vibration. The T12-Pelvis model was used to obtain the modal vibration modes of the spine at resonant frequencies. Injury conditions of the spine were simulated and tested, including denucleation and/or facetectomy with removal of capsular ligaments. The results indicate the first-order vertical resonant frequency of the intact model is 7.21 Hz. After the denucleation at L4-L5, it decreases by more than 4% compared with the intact condition. All the injured conditions including disc injury and ligament injury decrease the resonant frequency of the spine. Due to the denucleation at L4-L5 the anteroposterior displacements of the vertebrae from L2 to L5 decrease and the vertical displacements of the vertebrae from L1 to L4 increase under vibration. The denucleation also decreases the rotational deformations of the vertebrae from L1 to L5. The material property sensitivity analysis shows intervertebral discs have a dominating effect on variation of vertical resonant frequency of the spine. The denucleation may decrease cushioning effects of adjacent motion segments at the injured level under vibration. The injured condition may increase the vertical displacement amplitudes of the spine above the injured level. All the injured conditions may decrease the resonant frequency of the spine system.
Calculation of Anharmonicities in Overtone Modes and Small-Cluster Shifts of Spherical-Top Molecules
Fuhr, Javier D.; Fiol, Juan; Cortizo, Eduardo; Fainstein, Pablo D.; Fregenal, Daniel E.; Guozden, Tomás; Kaúl, Enrique; Knoblauch, Pablo; Lamagna, Alberto; Maceira, Pablo; Rozas, Guillermo; Zarco, Martín
2014-06-01
Harmonic and anharmonic vibrational self-consistent field (VSCF) calculations were employed to investigate the fundamental and overtone modes of SF6 molecules. Determination of the Potential Energy Surface (PES) on a multidimensional grid of more than 65000 nodes was performed, and a system of 1D coupled-equations was solved. Corrections to the harmonic approximation for the frequencies of the fundamental modes and their overtones were obtained. Ab-initio calculations to the interaction potential between two molecules as a function of their position and orientation, and the corresponding energies for dimer formation, have been computed. Finally, the effect of dimerization on the molecular frequencies is investigated.
A Novel Vibration Mode Testing Method for Cylindrical Resonators Based on Microphones
Directory of Open Access Journals (Sweden)
Yongmeng Zhang
2015-01-01
Full Text Available Non-contact testing is an important method for the study of the vibrating characteristic of cylindrical resonators. For the vibratory cylinder gyroscope excited by piezo-electric electrodes, mode testing of the cylindrical resonator is difficult. In this paper, a novel vibration testing method for cylindrical resonators is proposed. This method uses a MEMS microphone, which has the characteristics of small size and accurate directivity, to measure the vibration of the cylindrical resonator. A testing system was established, then the system was used to measure the vibration mode of the resonator. The experimental results show that the orientation resolution of the node of the vibration mode is better than 0.1°. This method also has the advantages of low cost and easy operation. It can be used in vibration testing and provide accurate results, which is important for the study of the vibration mode and thermal stability of vibratory cylindrical gyroscopes.
Identification of surface species by vibrational normal mode analysis. A DFT study
Zhao, Zhi-Jian; Genest, Alexander; Rösch, Notker
2017-10-01
Infrared spectroscopy is an important experimental tool for identifying molecular species adsorbed on a metal surface that can be used in situ. Often vibrational modes in such IR spectra of surface species are assigned and identified by comparison with vibrational spectra of related (molecular) compounds of known structure, e. g., an organometallic cluster analogue. To check the validity of this strategy, we carried out a computational study where we compared the normal modes of three C2Hx species (x = 3, 4) in two types of systems, as adsorbates on the Pt(111) surface and as ligands in an organometallic cluster compound. The results of our DFT calculations reproduce the experimental observed frequencies with deviations of at most 50 cm-1. However, the frequencies of the C2Hx species in both types of systems have to be interpreted with due caution if the coordination mode is unknown. The comparative identification strategy works satisfactorily when the coordination mode of the molecular species (ethylidyne) is similar on the surface and in the metal cluster. However, large shifts are encountered when the molecular species (vinyl) exhibits different coordination modes on both types of substrates.
Normal mode calculations of trigonal selenium
DEFF Research Database (Denmark)
Hansen, Flemming Yssing; McMurry, H. L.
1980-01-01
. With such coordinates a potential energy, calculated with only a diagonal force matrix, is equivalent to one calculated with both off diagonal and diagonal elements when conventional coordinates are used. Another advantage is that often some force constants may be determined directly from frequencies at points of high....... In this way we have eliminated the ambiguity in the choice of valence coordinates, which has been a problem in previous models which used valence type interactions. Calculated sound velocities and elastic moduli are also given. The Journal of Chemical Physics is copyrighted by The American Institute...
Design for coupled-mode flutter and non-synchronous vibration in turbomachinery
Clark, Stephen Thomas
This research presents the detailed investigation of coupled-mode flutter and non-synchronous vibration in turbomachinery. Coupled-mode flutter and non-synchronous vibration are two aeromechanical challenges in designing turbomachinery that, when present, can cause engine blade failure. Regarding flutter, current industry design practices calculate the aerodynamic loads on a blade due to a single mode. In response to these design standards, a quasi three-dimensional, reduced-order modeling tool was developed for identifying the aeroelastic conditions that cause multi-mode flutter. This tool predicts the onset of coupled-mode flutter reasonable well for four different configurations, though certain parameters were tuned to agree with experimentation. Additionally, the results of this research indicate that mass ratio, frequency separation, and solidity have an effect on critical rotor speed for flutter. Higher mass-ratio blades require larger rotational velocities before they experience coupled-mode flutter. Similarly, increasing the frequency separation between modes and raising the solidity increases the critical rotor speed. Finally, and most importantly, design guidelines were generated for defining when a multi-mode flutter analysis is required in practical turbomachinery design. Previous work has shown that industry computational fluid dynamics can approximately predict non-synchronous vibration (NSV), but no real understanding of frequency lock-in and blade limit-cycle amplitude exists. Therefore, to understand the causes of NSV, two different reduced-order modeling approaches were used. The first approach uses a van der Pol oscillator to model a non-linear fluid instability. The van der Pol model is then coupled to a structural degree of freedom. This coupled system exhibits the two chief properties seen in experimental and computational non-synchronous vibration. Under various conditions, the fluid instability and the natural structural frequency will lock
Directory of Open Access Journals (Sweden)
Miguel Cruz-Irisson
2013-04-01
Full Text Available The vibrational dispersion relations of porous germanium (pGe and germanium nanowires (GeNWs were calculated using the ab initio density functional perturbation theory with a generalized gradient approximation with norm-conserving pseudopotentials. Both pores and nanowires were modeled using the supercell technique. All of the surface dangling bonds were saturated with hydrogen atoms. To address the difference in the confinement between the pores and the nanowires, we calculated the vibrational density of states of the two materials. The results indicate that there is a slight shift in the highest optical mode of the Ge-Ge vibration interval in all of the nanostructures due to the phonon confinement effects. The GeNWs exhibit a reduced phonon confinement compared with the porous Ge due to the mixed Ge-dihydride vibrational modes around the maximum bulk Ge optical mode of approximately 300 cm−1; however, the general effects of such confinements could still be noticed, such as the shift to lower frequencies of the highest optical mode belonging to the Ge vibrations.
Algorithm for the calculation of vibration inherent frequencies bending from two-shafts transmission
Directory of Open Access Journals (Sweden)
Grigore Jan-Cristian
2017-01-01
Full Text Available The operation of the speed shaft transmissions at or near the natural frequency of the pulses at the resonance phenomenon leads to bending, when the amplitude of the oscillations increases sharply, causing deterioration or complete destruction thereof. To avoid system resonance operation is necessary to know the most accurate values its pulsations and taking appropriate constructive measures to avoid overlapping with disturbing frequency harmonics (operating speeds.This paper presents an algorithm for calculating the pulsation and vibration modes in bending, and based on numerical simulations performed on a real two-shafts transmission and will draw conclusions drawn diagrams.
Kumar, Nitin; Neogi, Sanghamitra; Kent, Paul; Bandura, Andrei; Kubicki, James; Wesolowski, David; Sofo, Jorge
2008-03-01
We study the vibrational density of states (VDOS) of a thin water layer on the rutile (110) surface. The VDOS is obtained from the velocity-velocity autocorrelation function calculated from trajectories of large scale ab-initio molecular dynamics simulations. The rutile surface induces a shift to lower frequencies of the stretching modes with respect to pure water. The water vapor surface shows a peak at the vibrational frequency of free hydroxyls. Overall, the average stretching mode vibrational frequency increases with decreasing hydrogen bonding density. This density depends strongly on temperature. The water dissociation percentage at the surface can be correlated with the ratio between the weights of the stretching and the bending modes. Our results are in good agreement with inelastic neutron scattering measurements done on wet titania nanoparticles.
Vibrational relaxation pathways of AI and AII modes in N-methylacetamide clusters
Piatkowski, L.; Bakker, H.J.
2010-01-01
We studied the pathways of vibrational energy relaxation of the amide I (~1660 cm-1) and amide II (~1560 cm-1) vibrational modes of N-methylacetamide (NMA) in CCl4 solution using two-color femtosecond vibrational spectroscopy. We measured the transient spectral dynamics upon excitation of each of
Sparta, Manuel; Hansen, Mikkel B; Matito, Eduard; Toffoli, Daniele; Christiansen, Ove
2010-10-12
The availability of an accurate representation of the potential energy surface (PES) is an essential prerequisite in an anharmonic vibrational calculation. At the same time, the high dimensionality of the fully coupled PES and the adverse scaling properties with respect to the molecular size make the construction of an accurate PES a computationally demanding task. In the past few years, our group tested and developed a series of tools and techniques aimed at defining computationally efficient, black-box protocols for the construction of PESs for use in vibrational calculations. This includes the definition of an adaptive density-guided approach (ADGA) for the construction of PESs from an automatically generated set of evaluation points. Another separate aspect has been the exploration of the use of derivative information through modified Shepard (MS) interpolation/extrapolation procedures. With this article, we present an assembled machinery where these methods are embedded in an efficient way to provide both a general machinery as well as concrete computational protocols. In this framework we introduce and discuss the accuracy and computational efficiency of two methods, called ADGA[2gx3M] and ADGA[2hx3M], where the ADGA recipe is used (with MS interpolation) to automatically define modest sized grids for up to two-mode couplings, while MS extrapolation based on, respectively, gradients only and gradients and Hessians from the ADGA determined points provides access to sufficiently accurate three-mode couplings. The performance of the resulting potentials is investigated in vibrational coupled cluster (VCC) calculations. Three molecular systems serve as benchmarks: a trisubstituted methane (CHFClBr), methanimine (CH2NH), and oxazole (C3H3NO). Furthermore, methanimine and oxazole are addressed in accurate calculations aiming to reproduce experimental results.
Khater, Brahim; Guillemin, Jean-Claude; Benidar, Abdessamad; Bégué, Didier; Pouchan, Claude
2008-12-14
Both experimental and theoretical investigations are reported on the infrared spectrum of vinylphosphine-borane (CH(2)=CHPH(2) x BH(3)), a donor-acceptor complex. The gas phase infrared spectra (3500-600 cm(-1)) have been recorded at 0.5 cm(-1) resolution. This first primary alpha,beta-unsaturated phosphine-borane synthesized up to now is kinetically very unstable in the gas phase and decomposes rapidly into two fragments: the free vinylphosphine CH(2)=CHPH(2) and the monoborane BH(3) which dimerizes to form the more stable diborane B(2)H(6). Spectra of free CH(2)=CHPH(2) and B(2)H(6) compounds were also recorded to assign some vibration modes of the complex in very dense spectral regions. The analysis was completed by carrying out quantum mechanical calculations by density functional theory method at the B3LYP/6-31+G(**) level. Anharmonic frequencies and infrared intensities of the two predicted gauche and syn conformers of the vinylphosphine-borane complex were calculated in the 3500-100 cm(-1) region with the use of a variational approach, implemented in the P_ANHAR_V1.2 code. Because of the relatively weak interaction between the vinylphosphine and the monoborane, the vibrations of the complex can easily be subdivided into modes localized in the CH(2)=CHPH(2) and BH(3) moieties and into "intermolecular" modes. Localized modes are unambiguously correlated with the modes of the isolated monomers. Therefore, they are described in terms of the monomer vibrations, and the complexation shifts are defined as Delta nu = nu(complex) - nu(monomer) to make the effect of the complexation precise on each localized mode. In this objective, anharmonic frequencies and infrared intensities of the BH(3) monomer and the stable gauche and syn conformers of the free vinylphosphine were obtained at the same level of theory. In the gas phase, only the syn form of the complex was observed and assigned. All theoretically predicted frequencies and complexation shifts in magnitude and
Kaeding, T S
2015-06-01
Research in the field of whole body vibration (WBV) training and the use of it in practice might be hindered by the fact that WBV training devices generate and transmit frequencies and/or modes of vibration which are different to preset adjustments. This research project shall clarify how exact WBV devices apply the by manufacturer information promised preset frequency and mode of vibration. Nine professional devices for WBV training were tested by means of a tri-axial accelerometer. The accelerations of each device were recorded under different settings with a tri-axial accelerometer. Beneath the measurement of different combinations of preset frequency and amplitude the repeatability across 3 successive measurements with the same preset conditions and one measurement under loaded condition were carried out. With 3 exceptions (both Board 3000 & srt medical PRO) we did not find noteworthy divergences between preset and actual applied frequencies. In these 3 devices we found divergences near -25%. Loading the devices did not affect the applied frequency or mode of vibration. There were no important divergences measurable for the applied frequency and mode of vibration regarding repeatability. The results of our measurements cannot be generalized as we only measured one respectively at most two devices of one model in terms of a random sample. Based on these results we strongly recommend that user in practice and research should analyse their WBV training devices regarding applied frequency and mode of vibration.
Supplementary Information Table: S1 Calculated vibrational wave ...
Indian Academy of Sciences (India)
Administrator
514. 511 w. 519 vvw. 6a ring o.p bend. 508. 496 s. 500 vvw. 16 b ring o.p bend. 390. 387 vvw. 16a ring o.p bend. 334. 328 vvw. 9b C-H i.p bend. 274. 267 vvw. Hydrogen bonded vibrations. 184. 171 vs. Hydrogen bonded vibrations. 112. 120 vvs. Hydrogen bonded vibrations. 64. 57 sh. Hydrogen bonded vibrations.
Baggott, J. E.; Law, D. W.; Lightfoot, P. D.; Mills, I. M.
1986-11-01
In part I of this study [Baggott, Clase, and Mills, Spectrochim. Acta Part A 42, 319 (1986)] we presented FTIR spectra of gas phase cyclobutene and modeled the v=1-3 stretching states of both olefinic and methylenic C-H bonds in terms of a local mode model. In this paper we present some improvements to our original model and make use of recently derived ``x,K relations'' to find the equivalent normal mode descriptions. The use of both the local mode and normal mode approaches to modeling the vibrational structure is described in some detail. We present evidence for Fermi resonance interactions between the methylenic C-H stretch overtones and ring C-C stretch vibrations, revealed in laser photoacoustic spectra in the v=4-6 region. An approximate model vibrational Hamiltonian is proposed to explain the observed structure and is used to calculate the dynamics of the C-H stretch local mode decay resulting from interaction with lower frequency ring modes. The implications of our experimental and theoretical studies for mode-selective photochemistry are discussed briefly.
Benoit, David M.
2008-12-01
We introduce a new reduced-coupling technique to accelerate direct calculations of a selected number of vibrational frequencies in large molecular systems. Our method combines the advantages of the single-to-all correlation-corrected vibrational self-consistent field (STA-CC-VSCF) approach [D. M. Benoit, J. Chem. Phys. 125, 244110 (2006)] with those of the fast-CC-VSCF technique [D. M. Benoit, J. Chem. Phys. 120, 562 (2004)] and allows the ab initio calculation of only the relevant parts of the required potential energy surface (PES). We demonstrate, using a set of five aliphatic alcohol molecules, that the new fast-STA-CC-VSCF method is accurate and leads to very substantial time gains for the computations of the PES. We then use the fast-STA-CC-VSCF method to accelerate the computation of the OH-stretch and NH-stretch frequencies of the two lowest-energy conformers of noradrenaline, namely, AG1a and GG1a. Our new approach enables us to run the calculation 89 times faster than the standard CC-VSCF technique and makes it possible to use a high-level MP2/TZP description of the PES. We demonstrate that the influence of the strong mode-mode couplings is crucial for a realistic description of the particular OH-stretch vibrational signature of each conformer. Finally, of the two possible low-energy conformers, we identify AG1a as the one most likely to have been observed in the experiments of Snoek et al. [Mol. Phys. 101, 1239 (2003)].
Dose Rate Calculations for Rotary Mode Core Sampling Exhauster
Foust, D J
2000-01-01
This document provides the calculated estimated dose rates for three external locations on the Rotary Mode Core Sampling (RMCS) exhauster HEPA filter housing, per the request of Characterization Field Engineering.
Directory of Open Access Journals (Sweden)
Tsen Shaw-Wei D
2006-09-01
Full Text Available Abstract Background Recently, a technique which departs radically from conventional approaches has been proposed. This novel technique utilizes biological objects such as viruses as nano-templates for the fabrication of nanostructure elements. For example, rod-shaped viruses such as the M13 phage and tobacco mosaic virus have been successfully used as biological templates for the synthesis of semiconductor and metallic nanowires. Results and discussion Low wave number (≤ 20 cm-1 acoustic vibrations of the M13 phage have been studied using Raman spectroscopy. The experimental results are compared with theoretical calculations based on an elastic continuum model and appropriate Raman selection rules derived from a bond polarizability model. The observed Raman mode has been shown to belong to one of the Raman-active axial torsion modes of the M13 phage protein coat. Conclusion It is expected that the detection and characterization of this low frequency vibrational mode can be used for applications in nanotechnology such as for monitoring the process of virus functionalization and self-assembly. For example, the differences in Raman spectra can be used to monitor the coating of virus with some other materials and nano-assembly process, such as attaching a carbon nanotube or quantum dots.
Xue, Jianghong; Xia, Fei; Ye, Jun; Zhang, Jianwen; Chen, Shuhua; Xiong, Ying; Tan, Zuyuan; Liu, Renhuai; Yuan, Hong
2017-06-30
This paper presents a multiscale approach to study the nonlinear vibration of fiber reinforced composite laminates containing an embedded, through-width delamination dividing the laminate into four sub-laminates. The equations of motion are established from macroscopic nonlinear mechanics for plates and shells and micro-mechanics of composite material to allow for the influences of large amplitude, membrane stretching in the neutral plane, and the interactions of the sublaminates. Analytical solutions obtained in this paper reveal that the interaction penalty at the interfaces plays a coupling effect between sublaminates, which eventually alters the vibration characters of the four-sublaminate lamina in macroscopic and microscopic mechanism. From a macro perspective, sub-laminates above and below the delamination vibrate in exactly the same mode in spite of their different stiffness and the four-sublaminate lamina has a consistent global vibration mode. In accompanying with the macro vibration, micro buckles occur on the interfaces of the delamination with amplitude about 10(-3) times of that of the global mode. It is found that the vibration frequency is an eigenvalue of the delaminated lamina determined only by the geometry of the delamination. Authentication of the multiscale study is fulfilled by comparing the analytical solutions with the FEA results.
Vibrational modes of the Cu(100)-c(2x2)-Pd surface
DEFF Research Database (Denmark)
Stoltze, Per; Hannon, J.B.; Ibach, H.
1996-01-01
The vibrational modes of the surface have been measured using electron-energy loss spectroscopy. The measured mode energies are compared to dynamical models with parameters taken from effective medium theory. Strong Pd-Cu interplanar bonding gives rise to nearly degenerate Pd and Cu vibrations (95...... cm(-1)) at the (X) over bar point, despite the large mass difference of the ions. Upon low-temperature annealing of the surface, overlayer islands of pure Cu coalesce and order. These overlayer islands are characterized by a high-energy vibrational mode near 128 cm(-1) which grows in intensity upon...
Pacheco-Londono, Leonardo C.; Primera-Pedrozo, Oliva M.; Hernandez-Rivera, Samuel P.
2004-12-01
Fully optimized molecular geometry, parameters of reactivity and vibrational spectra of triacetone triperoxide (TATP) and homologue organic peroxides were calculated using B3LYP/6-31G(d,p) method within the Density Functional Theory formalism. Infrared and Raman Spectroscopy were utilized to obtain vibrational spectra of the energetic compound. The model consists in the relation found between the Raman Shift location of the important symmetric stretch ν(O-O) of the organic peroxides and the reactivity of the organic peroxides. A good correlation between the band location in the series studied and the x-y plane polarizability component and the ionization energy was found. Gas phase IR absorption of TATP in air was used for developing stand-off detection schemes of the important organic peroxide in air. The sublimation properties of TATP were measured using two methods: Grazing Angle Probe-Fiber Coupled FTIR and gravimetric on stainless steel surfaces. Sublimation rates, loading concentration values and absorbance band areas were measured and modeled using the persistent IR vibrational signature of the ν(C-O) mode.
Matsumura, Takeshi; Esashi, Masayoshi; Harada, Hiroshi; Tanaka, Shuji
For future mobile phones based on cognitive radio technology, a compact multi-band RF front-end architecture is strongly required and an integrated multi-band RF filter bank is a key component in it. Contour-mode resonators are receiving increased attention for a multi-band filter solution, because its resonant frequency is mainly determined by its size and shape, which are defined by lithography. However, spurious responses including flexural vibration are also excited due to its thin structure. To improve resonator performance and suppress spurious modes, visual observation with a laser probe system is very effective. In this paper, we have prototyped a mechanically-coupled disk-array filter, which consists of a Si disk and 2 disk-type resonators of higher-order wine-glass mode, and observed its vibration modes using a high-frequency laser-Doppler vibrometer (UHF-120, Polytec, Inc.). As a result, it was confirmed that higher order wine-glass mode vibration included a compound displacement, and that its out-of-plane vibration amplitude was much smaller than other flexural spurious modes. The observed vibration modes were compared with FEM (Finite Element Method) simulation results. In addition, it was also confirmed that the fabrication error, e.g. miss-alignment, induced asymmetric vibration.
Vibrational relaxation in simulated two-dimensional infrared spectra of two amide modes in solution
Dijkstra, Arend G.; Jansen, Thomas la Cour; Bloem, Robbert; Knoester, Jasper
2007-01-01
Two-dimensional infrared spectroscopy is capable of following the transfer of vibrational energy between modes in real time. We develop a method to include vibrational relaxation in simulations of two-dimensional infrared spectra at finite temperature. The method takes into account the correlated
National Aeronautics and Space Administration — There are several ongoing challenges in non-contacting blade vibration and stress measurement systems that can address closely spaced modes and blade-to-blade...
Directory of Open Access Journals (Sweden)
Alexander G. Milekhin
2017-05-01
Full Text Available Nanoantenna-assisted plasmonic enhancement of IR absorption and Raman scattering was employed for studying the vibrational modes in organic molecules. Ultrathin cobalt phthalocyanine films (3 nm were deposited on Au nanoantenna arrays with specified structural parameters. The deposited organic films reveal the enhancement of both Raman scattering and IR absorption vibrational modes. To extend the possibility of implementing surface-enhanced infrared absorption (SEIRA for biological applications, the detection and analysis of the steroid hormone cortisol was demonstrated.
Acoustic vibration modes and electron-lattice coupling in self-assembled silver nanocolumns.
Burgin, J; Langot, P; Arbouet, A; Margueritat, J; Gonzalo, J; Afonso, C N; Vallée, F; Mlayah, A; Rossell, M D; Van Tendeloo, G
2008-05-01
Using ultrafast spectroscopy, we investigated electron-lattice coupling and acoustic vibrations in self-assembled silver nanocolumns embedded in an amorphous Al2O3 matrix. The measured electron-lattice energy exchange time is smaller in the nanocolumns than in bulk silver, with a value very close to that of isolated nanospheres with comparable surface to volume ratio. Two vibration modes were detected and ascribed to the breathing and extensional mode of the nanocolumns, in agreement with numerical simulations.
Vibrational relaxation of the H2O bending mode in liquid water.
Larsen, Olaf F A; Woutersen, Sander
2004-12-22
We have studied the vibrational relaxation of the H(2)O bending mode in an H(2)O:HDO:D(2)O isotopic mixture using infrared pump-probe spectroscopy. The transient spectrum and its delay dependence reveal an anharmonic shift of 55+/-10 cm(-1) for the H(2)O bending mode, and a value of 400+/-30 fs for its vibrational lifetime. (c) 2004 American Institute of Physics.
Modeling and analysis of circular flexural-vibration-mode piezoelectric transformer.
Huang, Yihua; Huang, Wei
2010-12-01
We propose a circular flexural-vibration-mode piezoelectric transformer and perform a theoretical analysis of the transformer. An equivalent circuit is derived from the equations of piezoelectricity and the Hamilton's principle. With this equivalent circuit, the voltage gain ratio, input impedance, and the efficiency of the circular flexural-vibration-mode piezoelectric transformer can be determined. The basic behavior of the transformer is shown by numerical results.
Extended and localized vibrational modes in (1-3) Penrose-like piezocomposites
Montero de Espinosa, F.; Torres, M.
1994-09-01
Acoustic vibrational modes of piezocomposites with ceramic bars arranged at the vertices of both perfect Penrose tilings and random Penrose tilings have directly been observed by recording the corresponding standing vibration amplitude pattern. The random Penrose tiling exhibits similar although smoother spectrum than the perfect Penrose one. For both structures, the existence of extended and localized modes is shown. Resonances frequencies at the edges of the spectrum pseudogap correspond to localized and highly entropic modes. As expected, the modes are more localized in the random Penrose tiling case.
Mei, Chuh; Shen, Mo-How
1987-01-01
Multiple-mode nonlinear forced vibration of a beam was analyzed by the finite element method. Inplane (longitudinal) displacement and inertia (IDI) are considered in the formulation. By combining the finite element method and nonlinear theory, more realistic models of structural response are obtained more easily and faster.
Coupling between flexural modes in free vibration of single-walled carbon nanotubes
Energy Technology Data Exchange (ETDEWEB)
Liu, Rumeng; Wang, Lifeng, E-mail: walfe@nuaa.edu.cn [State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, 210016 Nanjing (China)
2015-12-15
The nonlinear thermal vibration behavior of a single-walled carbon nanotube (SWCNT) is investigated by molecular dynamics simulation and a nonlinear, nonplanar beam model. Whirling motion with energy transfer between flexural motions is found in the free vibration of the SWCNT excited by the thermal motion of atoms where the geometric nonlinearity is significant. A nonlinear, nonplanar beam model considering the coupling in two vertical vibrational directions is presented to explain the whirling motion of the SWCNT. Energy in different vibrational modes is not equal even over a time scale of tens of nanoseconds, which is much larger than the period of fundamental natural vibration of the SWCNT at equilibrium state. The energy of different modes becomes equal when the time scale increases to the microsecond range.
Coupling between flexural modes in free vibration of single-walled carbon nanotubes
Directory of Open Access Journals (Sweden)
Rumeng Liu
2015-12-01
Full Text Available The nonlinear thermal vibration behavior of a single-walled carbon nanotube (SWCNT is investigated by molecular dynamics simulation and a nonlinear, nonplanar beam model. Whirling motion with energy transfer between flexural motions is found in the free vibration of the SWCNT excited by the thermal motion of atoms where the geometric nonlinearity is significant. A nonlinear, nonplanar beam model considering the coupling in two vertical vibrational directions is presented to explain the whirling motion of the SWCNT. Energy in different vibrational modes is not equal even over a time scale of tens of nanoseconds, which is much larger than the period of fundamental natural vibration of the SWCNT at equilibrium state. The energy of different modes becomes equal when the time scale increases to the microsecond range.
A simple method for designing structural models with closely spaced modes of vibration
Hallauer, W. L., Jr.; Weisshaar, T. A.; Shostak, A. G.
1978-01-01
A simple method for designing a mathematical model with closely spaced vibration modes is described. The design process begins with a reference model having specified geometry, continuous inertia and stiffness distributions, and degrees of freedom, all of which remain unchanged. Two natural frequencies of this model are then forced together by means of systematic perturbation of the model's discrete inertia and stiffness parameters. There is only one eigenvalue solution per design cycle, and the gradient vector is calculated directly from the resulting modal quantities. The minimization procedure employed is unconstrained. As applications, a cantilevered plane grid model with five degrees of freedom and a bending-torsion-oscillator with eleven degrees of freedom are treated.
Free vibrations of an arbitrary structure in terms of component modes.
Dowell, E. H.
1972-01-01
A method for the analysis of the free vibrations of an arbitrary structure in terms of component modes is presented based upon the use of the normal, free-free modes of the components in a Rayleigh-Ritz analysis with the constraint or continuity conditions
Westra, H.J.R.; Karabacak, D.M.; Brongersma, S.H.; Crego-Calama, M.; Van der Zant, H.S.J.; Venstra, W.J.
2011-01-01
The interactions between parametrically- and directly-driven vibration modes of a clamped-clamped beam resonator are studied. An integrated piezoelectric transducer is used for direct and parametric excitation. First, the parametric amplification and oscillation of a single mode are analyzed by the
Calculation of characteristics of torsionally vibrating mechatronic system
A. Buchacz
2007-01-01
Purpose: of this paper is the application of the approximate method to solve the task of assigning the frequencymodalanalysis and characteristics of a mechatronic system.Design/methodology/approach: was the formulated and solved as a problem in the form of a set of differentialequations of motion and state equations of the considered mechatronic model of an object. To obtain thesolution, Galerkin’s method was used. The discussed torsionally vibrating mechanical system is a continuousbar of ci...
Dunn, Janette L.
2010-01-01
Understanding the normal mode vibrations of a molecule is important in the analysis of vibrational spectra. However, the complicated 3D motion of large molecules can be difficult to interpret. We show how images of normal modes of the fullerene molecule C[subscript 60] can be made easier to understand by superimposing them on images of the normal…
Aerial Ultrasonic Source Using Stripe-Mode Transverse Vibrating Plate with Jutting Driving Point
Miura, Hikaru; Ishikawa, Hitoshi
2009-07-01
Ultrasonic sources using a stripe-mode rectangular transverse vibrating plate have been used as acoustic sources emitting intense acoustic waves in air. Because these sources are based on the resonance of transverse vibration, their electric-acoustic conversion rate is as high as 90%, which is a merit. In this study, a vibrating plate with a unique shape was developed to enhance the effectiveness of acoustic sources. It is called a stripe-mode transverse vibrating plate with a jutting driving point. The advantage of this plate shape is that the acoustic source does not interfere with the emission of acoustic waves since the driving point is outside the plate, and there is no need to distinguish between the front and back sides of the vibrating plate. The conditions effective for driving the stripe-mode transverse vibrating plate were clarified. That is, the length of the side parallel to the node lines of the plate is an odd number times the length between the nodes in the stripe mode, and the length of the side perpendicular is at least 6 times but not a multiple of 3 greater than or equal to 15 times, subtracted by 0.5 times, the length between the nodes. Moreover, the length between the driving point and the edge of the plate is a positive integer with a noninteger value of 0.9.
Localization of natural modes of vibration in bladed disks
Bendiksen, O. O.; Valero, N. A.
1987-01-01
A study is presented of the mode localization phenomenon in imperfect blade-disk and blade-shroud-disk assemblies. The results indicate that unshrouded blades mounted on stiff disks are especially susceptible, and even small blade imperfections within manufacturing tolerances are likely to trigger mode localization. Increasing the interblade coupling by adding shrouds or reducing the disk stiffness greatly reduces the localization susceptiblity, although certain modes may still become localized if the shrouds are free to slip.
Directory of Open Access Journals (Sweden)
Darius Zizys
2015-12-01
Full Text Available The piezoelectric transduction mechanism is a common vibration-to-electric energy harvesting approach. Piezoelectric energy harvesters are typically mounted on a vibrating host structure, whereby alternating voltage output is generated by a dynamic strain field. A design target in this case is to match the natural frequency of the harvester to the ambient excitation frequency for the device to operate in resonance mode, thus significantly increasing vibration amplitudes and, as a result, energy output. Other fundamental vibration modes have strain nodes, where the dynamic strain field changes sign in the direction of the cantilever length. The paper reports on a dimensionless numerical transient analysis of a cantilever of a constant cross-section and an optimally-shaped cantilever with the objective to accurately predict the position of a strain node. Total effective strain produced by both cantilevers segmented at the strain node is calculated via transient analysis and compared to the strain output produced by the cantilevers segmented at strain nodes obtained from modal analysis, demonstrating a 7% increase in energy output. Theoretical results were experimentally verified by using open-circuit voltage values measured for the cantilevers segmented at optimal and suboptimal segmentation lines.
Zizys, Darius; Gaidys, Rimvydas; Dauksevicius, Rolanas; Ostasevicius, Vytautas; Daniulaitis, Vytautas
2015-12-23
The piezoelectric transduction mechanism is a common vibration-to-electric energy harvesting approach. Piezoelectric energy harvesters are typically mounted on a vibrating host structure, whereby alternating voltage output is generated by a dynamic strain field. A design target in this case is to match the natural frequency of the harvester to the ambient excitation frequency for the device to operate in resonance mode, thus significantly increasing vibration amplitudes and, as a result, energy output. Other fundamental vibration modes have strain nodes, where the dynamic strain field changes sign in the direction of the cantilever length. The paper reports on a dimensionless numerical transient analysis of a cantilever of a constant cross-section and an optimally-shaped cantilever with the objective to accurately predict the position of a strain node. Total effective strain produced by both cantilevers segmented at the strain node is calculated via transient analysis and compared to the strain output produced by the cantilevers segmented at strain nodes obtained from modal analysis, demonstrating a 7% increase in energy output. Theoretical results were experimentally verified by using open-circuit voltage values measured for the cantilevers segmented at optimal and suboptimal segmentation lines.
Egawa, Toru; Shinashi, Kiyoaki; Ueda, Toyotoshi; Ocola, Esther J; Chiang, Whe-Yi; Laane, Jaan
2014-02-13
The vapor-phase Raman spectra of cis- and trans-stilbene have been collected at high temperatures and assigned. The low-frequency skeletal modes were of special interest. The molecular structures and vibrational frequencies of both molecules have also been obtained using MP2/cc-pVTZ and B3LYP/cc-pVTZ calculations, respectively. The two-dimensional potential map for the internal rotations around the two Cphenyl-C(═C) bonds of cis-stilbene was generated by using a series of B3LYP/cc-pVTZ calculations. It was confirmed that the molecule has only one conformer with C2 symmetry. The energy level calculation with a two-dimensional Hamiltonian was carried out, and the probability distribution for each level was obtained. The calculation revealed that the "gearing" internal rotation in which the two phenyl rings rotate with opposite directions has a vibrational frequency of 26 cm(-1), whereas that of the "antigearing" internal rotation in which the phenyl rings rotate with the same direction is about 52 cm(-1). In the low vibrational energy region the probability distribution for the gearing internal rotation is similar to that of a one-dimensional harmonic oscillator, and in the higher region the motion behaves like that of a free rotor.
Lee, Scott A; Pinnick, David A; Anderson, A
2014-12-01
High-pressure Raman spectroscopy has been used to study the eigenvectors and eigenvalues of the vibrational modes of crystalline adenosine at 295 K by evaluating the logarithmic derivative of the vibrational frequency with respect to pressure: [Formula: see text]. Crystalline samples of molecular materials such as adenosine will have vibrational modes that are localized within a molecular unit ("internal" modes) as well as modes in which the molecular units vibrate against each other ("external" modes). The value of the logarithmic derivative is found to be a diagnostic probe of the nature of the eigenvector of the vibrational modes. Stretching modes which are predominantly internal to the molecule have low logarithmic derivatives while external modes have higher logarithmic derivatives. Particular interest is paid to the low-frequency (≤150 cm(-1)) modes. Based on the pressure dependence of its logarithmic derivative, a mode near 49 cm(-1) is identified as internal mode. The other modes below 400 cm(-1) have pressure dependences of their logarithmic derivatives consistent with being either (1) modes which are mainly external, meaning that the molecules of the unit cell vibrate against each other in translational or librational motions (or linear combinations thereof), or (2) torsional or bending modes involving a large number of atoms, mainly within a molecule. The modes above 400 cm(-1) all have pressure dependences of their logarithmic derivatives consistent with being mainly internal modes.
DEFF Research Database (Denmark)
Pawlowski, F; Jorgensen, P; Olsen, Jeppe
2002-01-01
A detailed study is carried out of the accuracy of molecular equilibrium geometries obtained from least-squares fits involving experimental rotational constants B(0) and sums of ab initio vibration-rotation interaction constants alpha(r)(B). The vibration-rotation interaction constants have been...... calculated for 18 single-configuration dominated molecules containing hydrogen and first-row atoms at various standard levels of ab initio theory. Comparisons with the experimental data and tests for the internal consistency of the calculations show that the equilibrium structures generated using Hartree......-Fock vibration-rotation interaction constants have an accuracy similar to that obtained by a direct minimization of the CCSD(T) energy. The most accurate vibration-rotation interaction constants are those calculated at the CCSD(T)/cc-pVQZ level. The equilibrium bond distances determined from these interaction...
Starkey, Carl A; Lee, Scott A; Anderson, Anthony
2016-01-01
High-pressure infrared spectroscopy has been used to study the eigenvectors and eigenvalues of the vibrational modes of crystalline adenosine at 298 K by evaluating the logarithmic derivative of the vibrational frequency with respect to pressure: [Formula: see text]. Crystalline samples of molecular materials such as adenosine have vibrational modes that are localized within a molecular unit ("internal" modes) as well as modes in which the molecular units vibrate against each other ("external" modes). The value of the logarithmic derivative is that it is a diagnostic probe of the nature of the eigenvector of these vibrational modes. Stretching modes, which are predominantly internal to the molecule, have low logarithmic derivatives while external modes have higher logarithmic derivatives. Particular attention is paid to modes in the 800-1000 cm(-1) range since modes in that region of the vibrational spectrum are found to be sensitive to the conformation of double-helical DNA. Since the sugar pucker is different for the various conformations of DNA, this fact suggests that these modes involve the motion of atoms in the sugar group. The vibrations of the hydrogen atoms are also of interest to study since the vibrational frequency of hydrogen atoms involved in hydrogen bonds has a negative pressure derivative. Such behavior clearly shows which hydrogen atoms are involved in hydrogen bonding.
Efficient vibration mode analysis of aircraft with multiple external store configurations
Karpel, M.
1988-01-01
A coupling method for efficient vibration mode analysis of aircraft with multiple external store configurations is presented. A set of low-frequency vibration modes, including rigid-body modes, represent the aircraft. Each external store is represented by its vibration modes with clamped boundary conditions, and by its rigid-body inertial properties. The aircraft modes are obtained from a finite-element model loaded by dummy rigid external stores with fictitious masses. The coupling procedure unloads the dummy stores and loads the actual stores instead. The analytical development is presented, the effects of the fictitious mass magnitudes are discussed, and a numerical example is given for a combat aircraft with external wing stores. Comparison with vibration modes obtained by a direct (full-size) eigensolution shows very accurate coupling results. Once the aircraft and stores data bases are constructed, the computer time for analyzing any external store configuration is two to three orders of magnitude less than that of a direct solution.
VIBRATIONAL RAMAN OPTICAL-ACTIVITY CALCULATIONS USING LONDON ATOMIC ORBITALS
DEFF Research Database (Denmark)
Helgaker, T.; Ruud, K.; Bak, Keld L.
1994-01-01
Ab initio calculations of Raman differential intensities are presented at the self-consistent field (SCF) level of theory. The electric dipole-electric dipole, electric dipole-magnetic dipole and electric dipole-electric quadrupole polarizability tensors are calculated at the frequency of the inc...... of the incident light, using SCF linear response theory. London atomic orbitals are employed, imposing gauge origin invariance on the calculations. Calculations have been carried out in the harmonic approximation for CFHDT and methyloxirane.......Ab initio calculations of Raman differential intensities are presented at the self-consistent field (SCF) level of theory. The electric dipole-electric dipole, electric dipole-magnetic dipole and electric dipole-electric quadrupole polarizability tensors are calculated at the frequency...
Vibration Method for Tracking the Resonant Mode and Impedance of a Microwave Cavity
Barmatz, M.; Iny, O.; Yiin, T.; Khan, I.
1995-01-01
A vibration technique his been developed to continuously maintain mode resonance and impedance much between a constant frequency magnetron source and resonant cavity. This method uses a vibrating metal rod to modulate the volume of the cavity in a manner equivalent to modulating an adjustable plunger. A similar vibrating metal rod attached to a stub tuner modulates the waveguide volume between the source and cavity. A phase sensitive detection scheme determines the optimum position of the adjustable plunger and stub turner during processing. The improved power transfer during the heating of a 99.8% pure alumina rod was demonstrated using this new technique. Temperature-time and reflected power-time heating curves are presented for the cases of no tracking, impedance tracker only, mode tracker only and simultaneous impedance and mode tracking. Controlled internal melting of an alumina rod near 2000 C using both tracking units was also demonstrated.
Electronic Properties of Si-Hx Vibrational Modes at Si Waveguide Interface.
Bashouti, Muhammad Y; Yousefi, Peyman; Ristein, Jürgen; Christiansen, Silke H
2015-10-01
Attenuated total reflectance (ATR) and X-ray photoelectron spectroscopy in suite with Kelvin probe were conjugated to explore the electronic properties of Si-Hx vibrational modes by developing Si waveguide with large dynamic detection range compared with conventional IR. The Si 2p emission and work-function related to the formation and elimination of Si-Hx bonds at Si surfaces are monitored based on the detection of vibrational mode frequencies. A transition between various Si-Hx bonds and thus related vibrational modes is monitored for which effective momentum transfer could be demonstrated. The combination of the aforementioned methods provides for results that permit a model for the kinetics of hydrogen termination of Si surfaces with time and advanced surface characterizing of hybrid-terminated semiconducting solids.
Energy Technology Data Exchange (ETDEWEB)
Dhote, Sharvari, E-mail: sharvari.dhote@mail.utoronto.ca; Zu, Jean; Zhu, Yang [Department of Mechanical and Industrial Engineering, University of Toronto, 5 King' s College Road, Toronto, Ontario M5S-3G8 (Canada)
2015-04-20
In this paper, a nonlinear wideband multi-mode piezoelectric vibration-based energy harvester (PVEH) is proposed based on a compliant orthoplanar spring (COPS), which has an advantage of providing multiple vibration modes at relatively low frequencies. The PVEH is made of a tri-leg COPS flexible structure, where three fixed-guided beams are capable of generating strong nonlinear oscillations under certain base excitation. A prototype harvester was fabricated and investigated through both finite-element analysis and experiments. The frequency response shows multiple resonance which corresponds to a hardening type of nonlinear resonance. By adding masses at different locations on the COPS structure, the first three vibration modes are brought close to each other, where the three hardening nonlinear resonances provide a wide bandwidth for the PVEH. The proposed PVEH has enhanced performance of the energy harvester in terms of a wide frequency bandwidth and a high-voltage output under base excitations.
Vibrational relaxation pathways of AI and AII modes in N-methylacetamide clusters.
Piatkowski, L; Bakker, H J
2010-11-04
We studied the pathways of vibrational energy relaxation of the amide I (~1660 cm⁻¹) and amide II (~1560 cm⁻¹) vibrational modes of N-methylacetamide (NMA) in CCl₄ solution using two-color femtosecond vibrational spectroscopy. We measured the transient spectral dynamics upon excitation of each of these amide modes. The results show that there is no energy transfer between the amide I (AI) and amide II (AII) modes. Instead we find that the vibrational energy is transferred on a picosecond time scale to a common combination tone of lower-frequency modes. By use of polarization-resolved femtosecond pump-probe measurements we also study the reorientation dynamics of the NMA molecules and the relative angle between the transition dipole moments of the AI and AII vibrations. The spectral dynamics at later times after the excitation (>40 ps) reveal the presence of a dissociation process of the NMA aggregates, trimers, and higher order structures into dimers and monomers. By measuring the dissociation kinetics at different temperatures, we determined the activation energy of this dissociation E(a) = 35 ± 3 kJ mol⁻¹.
Non-linear vibrational modes in biomolecules: A periodic orbits description
Energy Technology Data Exchange (ETDEWEB)
Kampanarakis, Alexandros [Department of Chemistry, University of Crete, and Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas (FORTH), Vasilika Vouton, Heraklion 71110, Crete (Greece); Farantos, Stavros C., E-mail: farantos@iesl.forth.gr [Department of Chemistry, University of Crete, and Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas (FORTH), Vasilika Vouton, Heraklion 71110, Crete (Greece); Daskalakis, Vangelis; Varotsis, Constantinos [Department of Environmental Science and Technology, Cyprus University of Technology, 31 Archbishop Kyprianos St., P.O. Box 50329, 3603 Lemesos (Cyprus)
2012-05-03
Graphical abstract: Vibrational frequency shifts in Fe{sup IV} = O species of the active site of cytochrome c oxidase are attributed to changes in the surrounding Coulomb field. Periodic orbits analysis assists to find the most anharmonic modes in model biomolecules. Highlights: Black-Right-Pointing-Pointer Periodic orbits are extended to multidimensional potentials of biomolecules. Black-Right-Pointing-Pointer Highly anharmonic vibrational modes and center-saddle bifurcations are detected. Black-Right-Pointing-Pointer Vibrational frequencies shifts in Oxoferryl species of CcO are observed. - Abstract: The vibrational harmonic normal modes of a molecule, which are valid at energies close to an equilibrium point (a minimum, maximum or saddle of the potential energy surface), are extended by periodic orbits to high energies where anharmonicity and coupling of the degrees of freedom are significant. In this way the assignment of the spectra, and thus the extraction of dynamics in highly excited molecules, can be obtained. New vibrational modes emanating from bifurcations of periodic orbits and long living localized trajectories signal the birth and localization of new quantum states. In this article we review and further study non-linear vibrational modes for model biomolecules such as alanine dipeptide and the active site in the oxoferryl oxidation state of the enzyme cytochrome c oxidase. We locate periodic orbits which exhibit high anhamonicity and lead to center-saddle bifurcations. These modes are associated to an isomerization process in alanine dipeptide and to frequency shifts in the oxoferryl observed by modifying the Coulomb field around the Imidazole-Fe{sup IV} = O species.
Energy Technology Data Exchange (ETDEWEB)
Sharpes, Nathan; Kumar, Prashant [Center for Energy Harvesting Materials and Systems (CEHMS), Virginia Tech, Blacksburg, Virginia 24061 (United States); Abdelkefi, Abdessattar; Abdelmoula, Hichem [Department of Mechanical and Aerospace Engineering, New Mexico State University, Las Cruces, New Mexico 88003 (United States); Adler, Jan [Center for Energy Harvesting Materials and Systems (CEHMS), Virginia Tech, Blacksburg, Virginia 24061 (United States); Institute of Dynamics and Vibration Research (IDS), Leibniz Universität, Hannover 30167 (Germany); Priya, Shashank [Center for Energy Harvesting Materials and Systems (CEHMS), Virginia Tech, Blacksburg, Virginia 24061 (United States); Bio-Inspired Materials and Devices Laboratory (BMDL), Virginia Tech, Blacksburg, Virginia 24061 (United States)
2016-07-18
Mode shapes in the design of mechanical energy harvesters, as a means of performance increase, have been largely overlooked. Currently, the vast majority of energy harvester designs employ some variation of a single-degree-of-freedom cantilever, and the mode shapes of such beams are well known. This is especially true for the first bending mode, which is almost exclusively the chosen vibration mode for energy harvesting. Two-dimensional beam shapes (those which curve, meander, spiral, etc., in a plane) have recently gained research interest, as they offer freedom to modify the vibration characteristics of the harvester beam for achieving higher power density. In this study, the second bending mode shape of the “Elephant” two-dimensional beam shape is examined, and its interaction with the first bending mode is evaluated. A combinatory mode shape created by using mass loading structural modification to lower the second bending modal frequency was found to interact with the first bending mode. This is possible since the first two bending modes do not share common areas of displacement. The combined mode shape is shown to produce the most power of any of the considered mode shapes.
Study of surface modes on a vibrating electrowetting liquid lens
Strauch, Matthias; Shao, Yifeng; Bociort, Florian; Urbach, H. Paul
2017-10-01
The increased usage of liquid lenses motivates us to investigate surface waves on the liquid's surface. During fast focal switching, the surface waves decrease the imaging quality. We propose a model that describes the surface modes appearing on a liquid lens and predicts the resonance frequencies. The effects of those surface modes on a laser beam are simulated using Fresnel propagation, and the model is verified experimentally.
Rajesh, P; Gunasekaran, S; Gnanasambandan, T; Seshadri, S
2015-02-25
The complete vibrational assignment and analysis of the fundamental vibrational modes of Trifluoperazine (TFZ) was carried out using the experimental FT-IR, FT-Raman and UV-Vis data and quantum chemical studies. The observed vibrational data were compared with the wavenumbers derived theoretically for the optimized geometry of the compound from the DFT-B3LYP gradient calculations employing 6-31G (d,p) basis set. Thermodynamic properties like entropy, heat capacity and enthalpy have been calculated for the molecule. The HOMO-LUMO energy gap has been calculated. The intramolecular contacts have been interpreted using natural bond orbital (NBO) and natural localized molecular orbital (NLMO) analysis. Important non-linear properties such as first hyperpolarizability of TFZ have been computed using B3LYP quantum chemical calculation. Copyright © 2014 Elsevier B.V. All rights reserved.
Synthesis of stiffness and mass matrices from experimental vibration modes.
Ross, R. G., Jr.
1971-01-01
With highly complex structures, it is sometimes desirable to derive a dynamic model of the system from experimental vibration data. This paper presents algorithms for synthesizing the mass and stiffness matrices from experimentally derived modal data in a way which preserves the physical significance of the individual mass and stiffness elements. The synthesizing procedures allow for the incorporation of other mass and stiffness data, whether empirical or based on the analyst's insight. The mass and stiffness matrices are derived for a cantilever beam example and are compared with those obtained using earlier techniques.
An Electromagnetic MEMS Energy Harvester Array with Multiple Vibration Modes
Directory of Open Access Journals (Sweden)
Huicong Liu
2015-07-01
Full Text Available This paper reports the design, micromachining and characterization of an array of electromagnetic energy harvesters (EHs with multiple frequency peaks. The authors present the combination of three multi-modal spring-mass structures so as to realize at least nine resonant peaks within a single microelectromechanical systems (MEMS chip. It is assembled with permanent magnet to show an electromagnetic-based energy harvesting capability. This is the first demonstration of multi-frequency MEMS EH existing with more than three resonant peaks within a limited frequency range of 189 to 662 Hz. It provides a more effective approach to harvest energy from the vibration sources of multiple frequency peaks.
Lee, Scott A; Pinnick, David A; Anderson, A
2015-01-01
Raman spectroscopy has been used to study the eigenvectors and eigenvalues of the vibrational modes of crystalline cytidine at 295 K and high pressures by evaluating the logarithmic derivative of the vibrational frequency ω with respect to pressure P: [Formula: see text]. Crystalline samples of molecular materials have strong intramolecular bonds and weak intermolecular bonds. This hierarchy of bonding strengths causes the vibrational optical modes localized within a molecular unit ("internal" modes) to be relatively high in frequency while the modes in which the molecular units vibrate against each other ("external" modes) have relatively low frequencies. The value of the logarithmic derivative is a useful diagnostic probe of the nature of the eigenvector of the vibrational modes because stretching modes (which are predominantly internal to the molecule) have low logarithmic derivatives while external modes have higher logarithmic derivatives. In crystalline cytidine, the modes at 85.8, 101.4, and 110.6 cm(-1) are external in which the molecules of the unit cell vibrate against each other in either translational or librational motions (or some linear combination thereof). All of the modes above 320 cm(-1) are predominantly internal stretching modes. The remaining modes below 320 cm(-1) include external modes and internal modes, mostly involving either torsional or bending motions of groups of atoms within a molecule.
Mitchell, Deborah G; Johnson, Alan M; Johnson, Jeremy A; Judd, Kortney A; Kim, Kilyoung; Mayhew, Maurine; Powell, Amber L; Sevy, Eric T
2008-02-14
Relaxation of highly vibrationally excited 1,2-, 1,3-, and 1,4-difluorobenzne (DFB) by collisions with carbon dioxide has been investigated using diode laser transient absorption spectroscopy. Vibrationally hot DFB (E' approximately 41,000 cm(-1)) was prepared by 248 nm excimer laser excitation followed by rapid radiationless relaxation to the ground electronic state. Collisions between hot DFB isomers and CO2 result in large amounts of rotational and translational energy transfer from the hot donors to the bath. The CO2 nascent rotational population distribution of the high-J (J = 58-80) tail of the 00(0)0 state was probed at short times following the excimer laser pulse to measure rate constants and probabilities for collisions populating these states. The amount of translational energy gained by CO2 during collisions was determined using Doppler spectroscopy to measure the width of the absorption line for each transition. The energy transfer probability distribution function, P(E,E'), for the large DeltaE tail was obtained by resorting the state-indexed energy transfer probabilities as a function of DeltaE. P(E,E') was fit to a biexponential function to determine the average energy transferred in a single DFB/CO2 collision and fit parameters describing the shape of P(E,E'). P(E,E') fit parameters for DFB/CO2 and the previously studied C6F6/CO2 system are compared to various donor molecular properties. A model based on Fermi's Golden Rule indicates that the shape of P(E,E') is primarily determined by the low-frequency out-of-plane donor vibrational modes. A fractional mode population analysis is performed, which suggests that for energy transfer from DFB and C6F6 to CO2 the two key donor vibrational modes from which energy leaks out of the donor into the bath are nu11 and nu16. These "gateway" modes are some of the same modes determined to be the most efficient energy transfer modes by quantum scattering studies of benzene/He collisions.
Vibrational studies of Thyroxine hormone: Comparative study with quantum chemical calculations
Borah, Mukunda Madhab; Devi, Th. Gomti
2017-11-01
The FTIR and Raman techniques have been used to record spectra of Thyroxine. The stable geometrical parameters and vibrational wave numbers were calculated based on potential energy distribution (PED) using vibrational energy distribution analysis (VEDA) program. The vibrational energies are assigned to monomer, chain dimer and cyclic dimers of this molecule using the basis set B3LYP/LANL2DZ. The computational scaled frequencies are in good agreements with the experimental results. The study is extended to calculate the HOMO-LUMO energy gap, Molecular Electrostatic Potential (MEP) surface, hardness (η), chemical potential (μ), Global electrophilicity index (ω) and different thermo dynamical properties of Thyroxine in different states. The calculated HOMO-LUMO energies show the charge transfer occurs within the molecule. The calculated Natural bond orbital (NBO) analysis confirms the presence of intra-molecular charge transfer as well as the hydrogen bonding interaction.
Xu, Ben; Poduska, Kristin M
2014-09-07
We demonstrate a correlation between how an IR-active vibrational mode responds to temperature changes and how it responds to crystallinity differences. Infrared (IR) spectroscopy was used to track changes in carbonate-related vibrational modes in three different CaCO3 polymorphs (calcite, aragonite, and vaterite) and CaMg(CO3)2 (dolomite) during heating. Of the three characteristic IR-active carbonate modes, the in-plane bending mode (ν4) shows the most pronounced changes with heating in polymorphs that have planar carbonate arrangements (calcite, aragonite, and dolomite). In contrast, this mode is virtually unchanged in vaterite, which has a canted arrangement of carbonate units. We correlate these trends with recent studies that identified the ν4 mode as most susceptible to changes related to crystallinity differences in calcite and amorphous calcium carbonate. Thus, our results suggest that studies of packing arrangements could provide a generalizable approach to identify the most diagnostic vibrational modes for tracking either temperature-dependent or crystallinity-related effects in IR-active solids.
Elementary flux modes in a nutshell: properties, calculation and applications.
Zanghellini, Jürgen; Ruckerbauer, David E; Hanscho, Michael; Jungreuthmayer, Christian
2013-09-01
Elementary flux mode (EFM) analysis allows the unbiased decomposition of a metabolic network into minimal functional units, making it a powerful tool for metabolic engineering. While the use of EFM analysis (EFMA) is still limited by the size of the models it can handle, EFMA has been successfully applied to solve real-world metabolic engineering problems. Here we provide a user-oriented introduction to EFMA, provide examples of recent applications, analyze current research strategies to overcome the computational restrictions and give an overview over current approaches, which aim to identify and calculate only biologically relevant EFMs. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Mode-selective vibrational modulation of charge transport in organic electronic devices
Bakulin, Artem A.
2015-08-06
The soft character of organic materials leads to strong coupling between molecular, nuclear and electronic dynamics. This coupling opens the way to influence charge transport in organic electronic devices by exciting molecular vibrational motions. However, despite encouraging theoretical predictions, experimental realization of such approach has remained elusive. Here we demonstrate experimentally that photoconductivity in a model organic optoelectronic device can be modulated by the selective excitation of molecular vibrations. Using an ultrafast infrared laser source to create a coherent superposition of vibrational motions in a pentacene/C60 photoresistor, we observe that excitation of certain modes in the 1,500–1,700 cm−1 region leads to photocurrent enhancement. Excited vibrations affect predominantly trapped carriers. The effect depends on the nature of the vibration and its mode-specific character can be well described by the vibrational modulation of intermolecular electronic couplings. This presents a new tool for studying electron–phonon coupling and charge dynamics in (bio)molecular materials.
Study of surface modes on a vibrating electrowetting liquid lens
Strauch, M.; Shao, Y.; Bociort, F.; Urbach, Paul
2017-01-01
The increased usage of liquid lenses motivates us to investigate surface waves on the liquid's surface. During fast focal switching, the surface waves decrease the imaging quality. We propose a model that describes the surface modes appearing on a liquid lens and predicts the resonance
Phonon Transport at Crystalline Si/Ge Interfaces: The Role of Interfacial Modes of Vibration.
Gordiz, Kiarash; Henry, Asegun
2016-03-16
We studied the modal contributions to heat conduction at crystalline Si and crystalline Ge interfaces and found that more than 15% of the interface conductance arises from less than 0.1% of the modes in the structure. Using the recently developed interface conductance modal analysis (ICMA) method along with a new complimentary methodology, we mapped the correlations between modes, which revealed that a small group of interfacial modes, which exist between 12-13 THz, exhibit extremely strong correlation with other modes in the system. It is found that these interfacial modes (e.g., modes with large eigen vectors for interfacial atoms) are enabled by the degree of anharmonicity near the interface, which is higher than in the bulk, and therefore allows this small group of modes to couple to all others. The analysis sheds light on the nature of localized vibrations at interfaces and can be enlightening for other investigations of localization.
Improved orthogonality check for measured modes. [from ground vibration testing of structures
Berman, A.
1980-01-01
A method is proposed for performing an orthogonality check for normal modes derived from ground vibration testing. The method utilizes partitioned mass and stiffness matrices for a linear undamped representation of a structure. The normalization of the modes by the proposed method inherently includes the effects of significant displacements which were not measured; and the method may allow the use of fewer measurement points than would be necessary with the conventional method.
nmr spectroscopic study and dft calculations of vibrational analyses ...
African Journals Online (AJOL)
Preferred Customer
ANALYSES, GIAO NMR SHIELDINGS AND 1JCH, 1JCC SPIN-SPIN COUPLING. CONSTANTS ... proton coupled and uncoupled 13C, 15N, DEPT, COSY, HETCOR, INADEQUATE NMR spectra and the magnitude ... methodology an interesting variety of spin-spin coupling constants can be calculated with good accuracy in ...
Vibrational relaxation of the bending mode of HDO in liquid D2O.
Bodis, Pavol; Larsen, Olaf F A; Woutersen, Sander
2005-06-23
The vibrational relaxation of the bending mode of HDO in liquid D2O has been studied using time-resolved mid-infrared pump-probe spectroscopy. At short delays, the transient spectrum clearly shows the v = 1 --> 2 induced absorption and v = 1 --> 0 bleaching and stimulated emission, whereas at long delays, the transient spectrum is dominated by the spectral changes caused by the temperature increase in the sample after vibrational relaxation. From the decay of the v = 1 --> 2 induced absorption, we obtain an estimate of 390 +/- 50 fs for the vibrational lifetime, in surprisingly good agreement with recent theoretical predictions. In the v = 0 --> 1 frequency region, the decay of the absorption change involves a second, slower component, which suggests that after vibrational relaxation the system is not yet in thermal equilibrium.
Vibrational resonance induced by transition of phase-locking modes in excitable systems.
Yang, Lijian; Liu, Wangheng; Yi, Ming; Wang, Canjun; Zhu, Qiaomu; Zhan, Xuan; Jia, Ya
2012-07-01
We study the occurrence of vibrational resonance as well as the underlying mechanism in excitable systems. The single vibration resonance and vibration bi-resonance are observed when tuning the amplitude and frequency of high-frequency force simultaneously. Furthermore, by virtue of the phase diagram of low-frequency-signal-free FitzHugh-Nagumo model, it is found that each maxima of response measure is located exactly at the transition boundary of phase patterns. Therefore, it is the transition between different phase-locking modes that induces vibrational resonance in the excitable systems. Finally, this mechanism is verified in the Hodgkin-Huxley neural model. Our results provide insights into the transmission of weak signals in nonlinear systems, which are valuable in engineering for potential applications.
Pulsed differential holographic measurements of vibration modes of high temperature panels
Evensen, D. A.; Aprahamian, R.; Overoye, K. R.
1972-01-01
Holography is a lensless imaging technique which can be applied to measure static or dynamic displacements of structures. Conventional holography cannot be readily applied to measure vibration modes of high-temperature structures, due to difficulties caused by thermal convection currents. The present report discusses the use of pulsed differential holography, which is a technique for recording structural motions in the presence of random fluctuations such as turbulence. An analysis of the differential method is presented, and demonstration experiments were conducted using heated stainless steel plates. Vibration modes were successfully recorded for the heated plates at temperatures of 1000, 1600, and 2000 F. The technique appears promising for such future measurments as vibrations of the space shuttle TPS panels or recording flutter of aeroelastic models in a wind-tunnel.
Directory of Open Access Journals (Sweden)
Yizhou Yang
2017-01-01
Full Text Available To diagnose mechanical faults of rotor-bearing-casing system by analyzing its casing vibration signal, this paper proposes a training procedure of a fault classifier based on variational mode decomposition (VMD, local linear embedding (LLE, and support vector machine (SVM. VMD is used first to decompose the casing signal into several modes, which are subsignals usually modulated by fault frequencies. Vibrational features are extracted from both VMD subsignals and the original one. LLE is employed here to reduce the dimensionality of these extracted features and make the samples more separable. Then low-dimensional data sets are used to train the multiclass SVM whose accuracy is tested by classifying the test samples. When the parameters of LLE and SVM are well optimized, this proposed method performs well on experimental data, showing its capacity of diagnosing casing vibration faults.
Experimental and DFT dimer modeling studies of the H-bond induced-vibration modes of l-β-Homoserine.
Yalagi, Shashikala; Tonannavar, J; Yenagi, Jayashree
2017-06-15
The vibrational spectra for l-β-Homoserine have been measured (IR absorption: 4000-400cm(-1)/Raman spectra: 4000-200cm(-1)). Characteristic vibrational modes of ammonium (-NH3(+)), carboxylate (-CO2(-)) and hydroxyl (-OH) groups across the 3700-1400cm(-1) are all identified to have originated in inter-molecular hydrogen bonding involving these functional groups. DFT calculations at B3LYP/6-311++G(d, p) level have yielded a single neutral monomer in the gas phase. Since as a member of the amino acids which are known to possess zwitterionic structure in condensed phase, the neutral monomer of l-β-Homoserine is optimized to a zwitterionic structure in a water medium. Consideration of two dimer structures, one dimer with -NH‧‧‧O bond and another -OH‧‧‧O bond, has given rise to vibrational modes that satisfactorily fit to all the observed absorption and Raman bands. It is found that the dimer with -OH‧‧‧O bond (binding energy, 8.896kcal/mol) is more tightly bound than the dimer with -NH‧‧‧O bond (8.363kcal/mol). Copyright © 2017 Elsevier B.V. All rights reserved.
Molchanov, A. M.; Bykov, L. V.; Yanyshev, D. S.
2017-05-01
The method has been developed to calculate infrared radiation of vibrational nonequilibrium gas based on k-distribution. A comparison of the data on the calculated nonequilibrium radiation with results of other authors and with experimental data has shown satisfactory agreement. It is shown that the results of calculation of radiation intensity using nonequilibrium and equilibrium methods significantly differ from each other. The discrepancy increases with increasing height (decreasing pressure) and can exceed an order of magnitude.
Temperature-dependent vibrational spectroscopic study and DFT calculations of the sorbic acid
Saraiva, G. D.; Nogueira, C. E. S.; Freire, P. T. C.; de Sousa, F. F.; da Silva, J. H.; Teixeira, A. M. R.; Mendes Filho, J.
2015-02-01
This work reports a temperature-dependent vibrational spectroscopic study of the sorbic acid (C6H8O2), as well as the mode assignment at ambient conditions, based on the density functional theory. Temperature-dependent vibrational properties have been performed in polycrystalline sorbic acid through both Raman and infrared spectroscopy in the 20-300 K and 80-300 K temperature ranges, respectively. These studies present the occurrence of some modifications in the Raman spectra that could be interpreted as a low temperature phase transition undergone by sorbic acid from the monoclinic phase to an unknown phase with conformational change of the molecules in the unit cell.
Calculation of Vibrational Spectra of Coordinated Perchlorate Ion in Dipolar Aprotic Solvents
Mikhailov, G. P.
2014-09-01
The vibrational spectrum of perchlorate ion coordinated to Li+, Na+, and Mg2+ cations in dipolar aprotic solvents (DAS) was studied using Hartree-Fock methods not taking into account (RHF) and accounting partially for electron correlation (MP2) and B3LYP density functional theory within the polarized continuum model (PCM). Experimental and calculated spectrum-structure correlations for coordinated perchlorate-ion complexes in DAS were analyzed. It was found that the best fi t of the experimental and calculated vibrational spectra was achieved by taking into account the electron correlation and non-specific solvation.
Mode pattern of internal flow in a water droplet on a vibrating hydrophobic surface.
Kim, Hun; Lim, Hee-Chang
2015-06-04
The objective of this study is to understand the mode pattern of the internal flow in a water droplet placed on a hydrophobic surface that periodically and vertically vibrates. As a result, a water droplet on a vibrating hydrophobic surface has a typical shape that depends on each resonance mode, and, additionally, we observed a diversified lobe size and internal flows in the water droplet. The size of each lobe at the resonance frequency was relatively greater than that at the neighboring frequencies, and the internal flow of the nth order mode was also observed in the flow visualization. In general, large symmetrical flow streams were generated along the vertical axis in each mode, with a large circulating movement from the bottom to the top, and then to the triple contact line along the droplet surface. In contrast, modes 2 and 4 generated a Y-shaped flow pattern, in which the flow moved to the node point in the lower part of the droplet, but modes 6 and 8 had similar patterns, with only a little difference. In addition, as a result of the PIV measurement, while the flow velocity of mode 4 was faster than that of model 2, those of modes 6 and 8 were almost similar.
Modes of vibration in a circular plate with three simple support points.
Chi, C.
1972-01-01
The analytical solutions for the vibrational modes of a thin circular flat plate that is simply supported at three points on the circumference are presented. The mode shapes and corresponding eigenvalues are obtained. Results show that the modes can be grouped into four different types depending on the manner by which they receive the pressure at the supported points. The problem is of the mixed boundary value type in that some portion of the boundary is free while the other portion is simply supported.
Observation of sound-induced corneal vibrational modes by optical coherence tomography
Akca, B. Imran; Chang, Ernest W.; Kling, Sabine; Ramier, Antoine; Scarcelli, Giuliano; Marcos, Susana; Yun, Seok H.
2015-01-01
The mechanical stability of the cornea is critical for maintaining its normal shape and refractive function. Here, we report an observation of the mechanical resonance modes of the cornea excited by sound waves and detected by using phase-sensitive optical coherence tomography. The cornea in bovine eye globes exhibited three resonance modes in a frequency range of 50-400 Hz. The vibration amplitude of the fundamental mode at 80-120 Hz was ~8 µm at a sound pressure level of 100 dB (2 Pa). Vibr...
Wang, Ji; Yang, Jiashi; Li, Jiangyu
2007-03-01
Energy trapping has important applications in the design of thickness-shear resonators. Considerable efforts have been made for the effective utilization and improvement of energy trapping with variations of plate configurations, such as adding electrodes and contouring. As a new approach in seeking improved energy trapping feature, we analyze thickness-shear vibrations in an elastic plate with functionally graded material (FGM) of in-plane variation of mechanical properties, such as elastic constants and density. A simple and general equation governing the thickness-shear modes is derived from a variational analysis. A plate with piecewise constant material properties is analyzed as an example. It is shown that such a plate can support thickness-shear vibration modes with obvious energy trapping. Bechmann's number for the existence of only one trapped mode also can be determined accordingly.
Campelo, M. J. M.; Freire, P. T. C.; Mendes Filho, J.; de Toledo, T. A.; Teixeira, A. M. R.; da Silva, L. E.; Bento, R. R. F.; Faria, J. L. B.; Pizani, P. S.; Gusmão, G. O. M.; Coutinho, H. D. M.; Oliveira, M. T. A.
2017-10-01
A new derivative of Meldrum's acid 5-((5-chloropyridin-2-ylamino)methylene)-2,2-dimethyl-1,3-dioxane-4,6-dione (CYMM) of molecular formula C12H11ClN2O4 was synthesized and structurally characterized using single crystal X-ray diffraction technique. The vibrational properties of the crystal were studied by Fourier Transform infrared (FT-IR), Fourier Transform Raman (FT-Raman) techniques and theoretical calculations of quantum chemistry using Density functional theory (DFT) and Density functional perturbation theory (DFPT). A comparison with experimental spectra allowed the assignment of all the normal modes. The descriptions of the normal modes were carried by means of potential energy distribution (PED). Additionally, analysis of the antimicrobial activity and antibiotic resistance modulatory activity was carried out to evaluate the antibacterial potential of the CYMM.
Local vibration modes and nitrogen incorporation in AlGaAs:N layers
Energy Technology Data Exchange (ETDEWEB)
Gallardo, E.; Lazic, S.; Calleja, J.M. [Dept. de Fisica de Materiales, Universidad Autonoma de Madrid (Spain); Miguel-Sanchez, J.; Montes, M.; Hierro, A.; Gargallo-Caballero, R.; Guzman, A.; Munoz, E. [Instituto de Sistemas Optoelectronicos y Microtecnologia, Universidad Politecnica de Madrid (Spain); Teweldeberhan, A.M.; Fahy, S. [Tyndall National Institute, Cork (Ireland)
2008-07-01
Raman scattering measurements in dilute AlGaAs:N films grown by plasma-assisted molecular beam epitaxy on (100) GaAs substrates reveal strong local vibration modes (LVM) associated to N complexes. The LVM observed frequencies between 325 and 540 cm{sup -1} are in good agreement with density functional theory supercell calculations of Al{sub n}Ga{sub 4-n}N complexes (n=1,2,3,4). We find that the observed LVMs correspond to all n values including Al{sub 4}N. The LVMs spectra are resonant at energies around 1.85 eV. The values of the extended phonon frequencies of the ternary compound (GaAs and AlAs-like) reveal changes in the N distribution depending on the growth conditions: A transition from random- to non-random nitrogen distribution is observed upon increasing the growth temperature. Our results confirm the preferential bonding of N to Al in AlGaAs:N, due to the higher Al-N bond strength as compared to the Ga-N bond. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)
Tamayo, Javier; Pini, Valerio; Kosaka, Prisicila; Martinez, Nicolas F; Ahumada, Oscar; Calleja, Montserrat
2012-08-10
There is a need for noninvasive techniques for simultaneous imaging of the stress and vibration mode shapes of nanomechanical systems in the fields of scanning probe microscopy, nanomechanical biological and chemical sensors and the semiconductor industry. Here we show a novel technique that combines a scanning laser, the beam deflection method and digital multifrequency excitation and analysis for simultaneous imaging of the static out-of-plane displacement and the shape of five vibration modes of nanomechanical systems. The out-of-plane resolution is at least 100 pm Hz⁻¹/² and the lateral resolution, which is determined by the laser spot size, is 1-1.5 μm. The capability of the technique is demonstrated by imaging the residual surface stress of a microcantilever together with the shape of the first 22 vibration modes. The vibration behavior is compared with rigorous finite element simulations. The technique is suitable for major improvements in the imaging of liquids, such as higher bandwidth and enhanced spatial resolution.
Effect of instantaneous and continuous quenches on the density of vibrational modes in model glasses
Lerner, Edan; Bouchbinder, Eran
2017-08-01
Computational studies of supercooled liquids often focus on various analyses of their "underlying inherent states"—the glassy configurations at zero temperature obtained by an infinitely fast (instantaneous) quench from equilibrium supercooled states. Similar protocols are also regularly employed in investigations of the unjamming transition at which the rigidity of decompressed soft-sphere packings is lost. Here we investigate the statistics and localization properties of low-frequency vibrational modes of glassy configurations obtained by such instantaneous quenches. We show that the density of vibrational modes grows as ωβ with β depending on the parent temperature T0 from which the glassy configurations were instantaneously quenched. For quenches from high temperature liquid states we find β ≈3 , whereas β appears to approach the previously observed value β =4 as T0 approaches the glass transition temperature. We discuss the consistency of our findings with the theoretical framework of the soft potential model, and contrast them with similar measurements performed on configurations obtained by continuous quenches at finite cooling rates. Our results suggest that any physical quench at rates sufficiently slower than the inverse vibrational time scale—including all physically realistic quenching rates of molecular or atomistic glasses—would result in a glass whose density of vibrational modes is universally characterized by β =4 .
Directory of Open Access Journals (Sweden)
Sun Yi-Hang
2017-01-01
Full Text Available In order to detect a mechanical type of structural failure of the circuit breaker, the characteristics of the circuit breaker mechanical vibration signal is analyzed in this paper. A combination of medium voltage circuit breaker based on empirical mode decomposition (EMD amount of energy and support vector machine (SVM theory vibration signal feature vector extraction and analysis of fault classification method is proposed. First, the vibration signal of the circuit breaker is decomposed by EMD, then intrinsic mode function (IMF is obtain. The major fault feature information intrinsic mode functions the amount of energy of the component is obtained by discrete sampling points and the amount of energy. Using the amount of energy of IMF component as a feature vector, the failure of the test sample signal as input feature vector into trained “BT-SVM” support vector machine classification mechanism for fault classification. The differences and fault type of vibration signals can be identified by this method through the experimental analysis.
Component mode synthesis and large deflection vibrations of complex structures. [beams and trusses
Mei, C.
1984-01-01
The accuracy of the NASTRAN modal synthesis analysis was assessed by comparing it with full structure NASTRAN and nine other modal synthesis results using a nine-bay truss. A NASTRAN component mode transient response analysis was also performed on the free-free truss structure. A finite element method was developed for nonlinear vibration of beam structures subjected to harmonic excitation. Longitudinal deformation and inertia are both included in the formula. Tables show the finite element free vibration results with and without considering the effects of longitudinal deformation and inertia as well as the frequency ratios for a simply supported and a clamped beam subjected to a uniform harmonic force.
Energy Technology Data Exchange (ETDEWEB)
Chase, Hilary M.; Chen, Shunli; Fu, Li; Upshur, Mary Alice; Rudshteyn, Benjamin; Thomson, Regan J.; Wang, Hong-Fei; Batista, Victor S.; Geiger, Franz M.
2017-09-01
Inferring molecular orientations from vibrational sum frequency generation (SFG) spectra is challenging in polarization combinations that result in low signal intensities, or when the local point group symmetry approximation fails. While combining experiments with density functional theory (DFT) could overcome this problem, the scope of the combined method has yet to be established. Here, we assess its feasibility of determining the distributions of molecular orientations for one monobasic ester, two epoxides and three alcohols at the vapor/fused silica interface. We find that molecular orientations of nonlocal vibrational modes cannot be determined using polarization-resolved SFG measurements alone.
Estimation of the mechanical properties of the eye through the study of its vibrational modes.
Aloy, M Á; Adsuara, J E; Cerdá-Durán, P; Obergaulinger, M; Esteve-Taboada, J J; Ferrer-Blasco, T; Montés-Micó, R
2017-01-01
Measuring the eye's mechanical properties in vivo and with minimally invasive techniques can be the key for individualized solutions to a number of eye pathologies. The development of such techniques largely relies on a computational modelling of the eyeball and, it optimally requires the synergic interplay between experimentation and numerical simulation. In Astrophysics and Geophysics the remote measurement of structural properties of the systems of their realm is performed on the basis of (helio-)seismic techniques. As a biomechanical system, the eyeball possesses normal vibrational modes encompassing rich information about its structure and mechanical properties. However, the integral analysis of the eyeball vibrational modes has not been performed yet. Here we develop a new finite difference method to compute both the spheroidal and, specially, the toroidal eigenfrequencies of the human eye. Using this numerical model, we show that the vibrational eigenfrequencies of the human eye fall in the interval 100 Hz-10 MHz. We find that compressible vibrational modes may release a trace on high frequency changes of the intraocular pressure, while incompressible normal modes could be registered analyzing the scattering pattern that the motions of the vitreous humour leave on the retina. Existing contact lenses with embebed devices operating at high sampling frequency could be used to register the microfluctuations of the eyeball shape we obtain. We advance that an inverse problem to obtain the mechanical properties of a given eye (e.g., Young's modulus, Poisson ratio) measuring its normal frequencies is doable. These measurements can be done using non-invasive techniques, opening very interesting perspectives to estimate the mechanical properties of eyes in vivo. Future research might relate various ocular pathologies with anomalies in measured vibrational frequencies of the eye.
Oosterhout, G.M.; van der Hoogt, Peter; Spiering, R.M.E.J.
1995-01-01
Various computational methods have been studied with respect to their suitability for obtaining very accurate solutions of plate vibration problems, especially for the higher modes. Because of the interest in the higher modes, also higher order effects such as transverse shear deformation and
"Good Vibrations": A workshop on oscillations and normal modes
Barbieri, Sara; Carpineti, Marina; Giliberti, Marco; Rigon, Enrico; Stellato, Marco; Tamborini, Marina
2016-05-01
We describe some theatrical strategies adopted in a two hour workshop in order to show some meaningful experiments and the underlying useful ideas to describe a secondary school path on oscillations, that develops from harmonic motion to normal modes of oscillations, and makes extensive use of video analysis, data logging, slow motions and applet simulations. Theatre is an extremely useful tool to stimulate motivation starting from positive emotions. That is the reason why the theatrical approach to the presentation of physical themes has been explored by the group "Lo spettacolo della Fisica" (http://spettacolo.fisica.unimi.it) of the Physics Department of University of Milano for the last ten years (Carpineti et al., JCOM, 10 (2011) 1; Nuovo Cimento B, 121 (2006) 901) and has been inserted also in the European FP7 Project TEMI (Teaching Enquiry with Mysteries Incorporated, see http://teachingmysteries.eu/en) which involves 13 different partners coming from 11 European countries, among which the Italian (Milan) group. According to the TEMI guidelines, this workshop has a written script based on emotionally engaging activities of presenting mysteries to be solved while participants have been involved in nice experiments following the developed path.
Directory of Open Access Journals (Sweden)
Kookhyun Kim
2012-09-01
Full Text Available An approximate method based on an assumed mode method has been presented for the free vibration analysis of a rectangular plate with arbitrary edge constraints. In the presented method, natural frequencies and their mode shapes of the plate are calculated by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. Characteristic orthogonal polynomials having the property of Timoshenko beam functions which satisfies edge constraints corresponding to those of the objective plate are used. In order to examine the accuracy of the proposed method, numerical examples of the rectangular plates with various thicknesses and edge constraints have been presented. The results have shown good agreement with those of other methods such as an analytic solution, an approximate solution, and a finite element analysis.
Space structure vibration modes: How many exist? Which ones are important?
Hughes, P. C.
1984-01-01
This report attempts to shed some light on the two issues raised in the title, namely, how many vibration modes does a real structure have, and which of these modes are important? The surprise-free answers to these two questions are, respectively, an infinite number and the first several modes. The author argues that the absurd subspace (all but the first billion modes) is not a strength of continuum modeling, but, in fact, a weakness. Partial differential equations are not real structures, only mathematical models. This note also explains (1) that the PDE model and the finite element model are, in fact, the same model, the latter being a numerical method for dealing with the former, (2) that modes may be selected on dynamical grounds other than frequency alone, and (3) that long slender rods are useful as primitive cases but dangerous to extrapolate from.
Using input command pre-shaping to suppress multiple mode vibration
Hyde, James M.; Seering, Warren P.
1990-01-01
Spacecraft, space-borne robotic systems, and manufacturing equipment often utilize lightweight materials and configurations that give rise to vibration problems. Prior research has led to the development of input command pre-shapers that can significantly reduce residual vibration. These shapers exhibit marked insensitivity to errors in natural frequency estimates and can be combined to minimize vibration at more than one frequency. This paper presents a method for the development of multiple mode input shapers which are simpler to implement than previous designs and produce smaller system response delays. The new technique involves the solution of a group of simultaneous non-linear impulse constraint equations. The resulting shapers were tested on a model of MACE, an MIT/NASA experimental flexible structure.
Wang, Zhao; Yan, Hong; Li, Qibing; Xu, Kun
2017-12-01
The unified gas-kinetic scheme (UGKS) is a direct modeling method for both continuum and rarefied flow computations. In the previous study, the UGKS was developed for diatomic molecular simulations with translation and rotational motions. In this paper, a UGKS with non-equilibrium translational, rotational, and vibrational degrees of freedom, will be developed. The new scheme is based on the phenomenological gas dynamics model, where the translational, rotational, and vibrational modes get to the equilibrium with different time scales with the introduction of rotational and vibrational collision numbers. This new scheme is tested in a few cases, such as the homogeneous flow relaxation, shock structure, shock tube problem, and flow passing through a circular and semi-circular cylinders. The analytical and DSMC solutions are used for the validation of the UGKS, and reasonable agreements have been achieved.
DEFF Research Database (Denmark)
Bak, KL; Bludsky, O.; Jorgensen, P
1995-01-01
A priori theory is derived for anharmonic calculations of vibrational circular dichroism (VCD). The anharmonic VCD expression is gauge origin independent and reduce to the magnetic field perturbation theory expression in the double-harmonic approximation. The theory has been implemented using...... for the atomic axial tensors and using second-order Moller-Plesset theory for the atomic polar tensors and the force fields, The changes of the vibrational rotatory strengths from anharmonicities are small, and do not explain the previously observed large discrepancies between the double-harmonic results...
He, Huijing; Yang, Jiashi; Kosinski, John A
2012-08-01
We study shear-horizontal free vibrations of an elastic cylinder with an oblate elliptical cross section and a traction-free surface. Exact vibration modes and frequencies are obtained. The results show the existence of thickness-shear and thickness-twist modes. The energy-trapping behavior of these modes is examined. Trapped modes are found wherein the vibration energy is largely confined to the central portion of the cross section and little vibration energy is found at the edges. It is also shown that face-shear modes are not allowed in such a cylinder. The results are useful for the understanding of the energy trapping phenomenon in contoured acoustic wave resonators.
High Accuracy ab Initio Calculations of Rotational-Vibrational Levels of the HCN/HNC System.
Makhnev, Vladimir Yu; Kyuberis, Aleksandra A; Zobov, Nikolai F; Lodi, Lorenzo; Tennyson, Jonathan; Polyansky, Oleg L
2018-02-08
Highly accurate ab initio calculations of vibrational and rotational-vibrational energy levels of the HCN/HNC (hydrogen cyanide/hydrogen isocyanide) isomerising system are presented for several isotopologues. All-electron multireference configuration interaction (MRCI) electronic structure calculations were performed using basis sets up to aug-cc-pCV6Z on a grid of 1541 geometries. The ab initio energies were used to produce an analytical potential energy surface (PES) describing the two minima simultaneously. An adiabatic Born-Oppenheimer diagonal correction (BODC) correction surface as well as a relativistic correction surface were also calculated. These surfaces were used to compute vibrational and rotational-vibrational energy levels up to 25 000 cm -1 which reproduce the extensive set of experimentally known HCN/HNC levels with a root-mean-square deviation σ = 1.5 cm -1 . We studied the effect of nonadiabatic effects by introducing opportune radial and angular corrections to the nuclear kinetic energy operator. Empirical determination of two nonadiabatic parameters results in observed energies up to 7000 cm -1 for four HCN isotopologues (HCN, DCN, H 13 CN, and HC 15 N) being reproduced with σ = 0.37 cm -1 . The height of the isomerization barrier, the isomerization energy and the dissociation energy were computed using a number of models; our best results are 16 809.4, 5312.8, and 43 729 cm -1 , respectively.
Vortex-induced vibration of a tension leg platform tendon: multi-mode limit cycle oscillations
Datta, Nabanita
2017-11-01
This paper studies the application of mathematical models to analyze the vortex-induced vibrations of the tendons of a given TLP along the Indian coastline, by using an analytical approach, analyzed using MATLAB. The tendon is subjected to a steady current load, which causes vortex-shedding downstream, leading to cross-flow vibrations. The magnitude of the excitation (lift and drag coefficients) depends on the vortex-shedding frequency. The resulting vibration is studied for possible resonant behavior. The excitation force is quantified empirically, the added mass by potential flow hydrodynamics, and the vibration by normal mode summation method. Non-linear viscous damping of the water is considered. The non-linear oscillations are studied by the phase-plane method, investigating the limit-cycle oscillations. The stable/unstable regions of the dynamic behavior are demarcated. The modal contribution to the total deflection is studied to establish the possibility of resonance of one of the wet modes with the vortex-shedding frequency.
Vortex-induced vibration of a tension leg platform tendon: Multi-mode limit cycle oscillations
Datta, Nabanita
2017-12-01
This paper studies the application of mathematical models to analyze the vortex-induced vibrations of the tendons of a given TLP along the Indian coastline, by using an analytical approach, analyzed using MATLAB. The tendon is subjected to a steady current load, which causes vortex-shedding downstream, leading to cross-flow vibrations. The magnitude of the excitation (lift and drag coefficients) depends on the vortex-shedding frequency. The resulting vibration is studied for possible resonant behavior. The excitation force is quantified empirically, the added mass by potential flow hydrodynamics, and the vibration by normal mode summation method. Non-linear viscous damping of the water is considered. The non-linear oscillations are studied by the phase-plane method, investigating the limit-cycle oscillations. The stable/unstable regions of the dynamic behavior are demarcated. The modal contribution to the total deflection is studied to establish the possibility of resonance of one of the wet modes with the vortex-shedding frequency.
Energy Technology Data Exchange (ETDEWEB)
Mugarza, Aitor; Shimizu, Tomoko K.; Ogletree, D. Frank; Salmeron, Miquel
2009-05-07
Tunneling electrons in a scanning tunneling microscope were used to excite specific vibrational quantum states of adsorbed water and hydroxyl molecules on a Ru(0 0 0 1) surface. The excited molecules relaxed by transfer of energy to lower energy modes, resulting in diffusion, dissociation, desorption, and surface-tip transfer processes. Diffusion of H{sub 2}O molecules could be induced by excitation of the O-H stretch vibration mode at 445 meV. Isolated molecules required excitation of one single quantum while molecules bonded to a C atom required at least two quanta. Dissociation of single H{sub 2}O molecules into H and OH required electron energies of 1 eV or higher while dissociation of OH required at least 2 eV electrons. In contrast, water molecules forming part of a cluster could be dissociated with electron energies of 0.5 eV.
Multiple mode analysis of the self-excited vibrations of rotary drilling systems
Germay, Christophe; Denoël, Vincent; Detournay, Emmanuel
2009-08-01
This paper extends the analysis of the self-excitated vibrations of a drilling structure presented in an earlier paper [T. Richard, C. Germay, E. Detournay, A simplified model to explore the root cause of stick-slip vibrations in drilling systems with drag bits, Journal of Sound and Vibration 305 (3) (2007) 432-456] by basing the formulation of the model on a continuum representation of the drillstring rather than on a characterization of the drilling structure by a 2 degree of freedom system. The particular boundary conditions at the bit-rock interface, which according to this model are responsible for the self-excited vibrations, account for both cutting and frictional contact processes. The cutting process combined with the quasi-helical motion of the bit leads to a regenerative effect that introduces a coupling between the axial and torsional modes of vibrations and a state-dependent delay in the governing equations, while the frictional contact process is associated with discontinuities in the boundary conditions when the bit sticks in its axial and angular motion. The dynamic response of the drilling structure is computed using the finite element method. While the general tendencies of the system response predicted by the discrete model are confirmed by this computational model (for example that the occurrence of stick-slip vibrations as well as the risk of bit bouncing are enhanced with an increase of the weight-on-bit or a decrease of the rotational speed), new features in the self-excited response of the drillstring can be detected. In particular, stick-slip vibrations are predicted to occur at natural frequencies of the drillstring different from the fundamental one (as sometimes observed in field operations), depending on the operating parameters.
Optimization procedure to control the coupling of vibration modes in flexible space structures
Walsh, Joanne L.
1987-01-01
As spacecraft structural concepts increase in size and flexibility, the vibration frequencies become more closely-spaced. The identification and control of such closely-spaced frequencies present a significant challenge. To validate system identification and control methods prior to actual flight, simpler space structures will be flown. To challenge the above technologies, it will be necessary to design these structures with closely-spaced or coupled vibration modes. Thus, there exists a need to develop a systematic method to design a structure which has closely-spaced vibration frequencies. This paper describes an optimization procedure which is used to design a large flexible structure to have closely-spaced vibration frequencies. The procedure uses a general-purpose finite element analysis program for the vibration and sensitivity analyses and a general-purpose optimization program. Results are presented from two studies. The first study uses a detailed model of a large flexible structure to design a structure with one pair of closely-spaced frequencies. The second study uses a simple equivalent beam model of a large flexible structure to obtain a design with two pairs of closely-spaced frequencies.
Lin, Shuyu
2012-01-01
The piezoelectric ultrasonic composite transducer, which can be used in either gas or liquid media, is studied in this paper. The composite transducer is composed of a longitudinal sandwich piezoelectric transducer, a mechanical transformer, and a metal circular plate in flexural vibration. Acoustic radiation is produced by the flexural circular plate, which is excited by the longitudinal sandwich transducer and transformer. Based on the classic flexural theory of plates, the equivalent lumped parameters for a plate in axially symmetric flexural vibration with free boundary conditions are obtained. The radiation impedance of the plate is derived and the relationship between the radiation impedance and the frequency is analyzed. The equivalent circuits for the plate in flexural vibration and the composite transducer are given. The vibrational modes and the harmonic response of the composite piezoelectric transducer are simulated by the numerical method. Based on the theoretical and numerical analysis, two composite piezoelectric ultrasonic transducers are designed and manufactured, their admittance-frequency curves are measured, and the resonance frequency is obtained. The flexural vibrational displacement distribution of the transducer is measured with a laser scanning vibrometer. It is shown that the theoretical results are in good agreement with the measured resonance frequency and the displacement distribution. © 2012 IEEE
Florián, Jan; Leszczynski, Jerzy; Johnson, Benny G.
1995-04-01
Harmonic force fields, frequencies, and IR and Raman intensities of the intermolecular vibrational modes in the cyclic formamide dimer and the guanine-cytosine and adenine-thymine DNA base pairs were calculated using several ab initio methods, including Hartree-Fock, MP2 and gradient-corrected density functional theory (DFT), with various basis sets. A polar environment was modeled using the polarizable continuum model (SCRF). The effect of electron correlation upon calculated Raman intensities was investigated using DFT. The normal coordinate analysis was carried out in internal coordinates observing C 2h symmetry of the formamide dimer. These coordinates were also generalized for the DNA base pairs, allowing force constants, frequencies and intensities of the characteristic intermolecular vibrational modes to be compared among the H-bonded complexes studied. In addition, coordinates defined in this way are directly related to standard DNA interbase structural parameters as pseudodyad, tilt and propeller twist angles. Extensive coupling of the intramolecular wagging vibrations of the amino groups participating in H-bonding with the tilt and propeller twist vibrations was obtained for the lowest frequency normal modes.
Influence of vibration modes on control system stabilization for space shuttle type vehicles
Greiner, H. G.
1972-01-01
An investigation was made to determine the feasibility of using conventional autopilot techniques to stabilize the vibration modes at the liftoff flight condition for two space shuttle configurations. One configuration is called the dual flyback vehicle in which both the orbiter and booster vehicles have wings and complete flyback capability. The other configuration is called the solid motor vehicle win which the orbiter only has flyback. The results of the linear stability analyses for each of the vehicles are summarized.
Singh, Swapnil; Singh, Harshita; Srivastava, Anubha; Tandon, Poonam; Sinha, Kirti; Bharti, Purnima; Kumar, Sudhir; Kumar, Padam; Maurya, Rakesh
2014-11-11
In the present work, a detailed conformational study of cladrin (3-(3,4-dimethoxy phenyl)-7-hydroxychromen-4-one) has been done by using spectroscopic techniques (FT-IR/FT-Raman/UV-Vis/NMR) and quantum chemical calculations. The optimized geometry, wavenumber and intensity of the vibrational bands of the cladrin in ground state were calculated by density functional theory (DFT) employing 6-311++G(d,p) basis sets. The study has been focused on the two most stable conformers that are selected after the full geometry optimization of the molecule. A detailed assignment of the FT-IR and FT-Raman spectra has been done for both the conformers along with potential energy distribution for each vibrational mode. The observed and scaled wavenumber of most of the bands has been found to be in good agreement. The UV-Vis spectrum has been recorded and compared with calculated spectrum. In addition, 1H and 13C nuclear magnetic resonance spectra have been also recorded and compared with the calculated data that shows the inter or intramolecular hydrogen bonding. The electronic properties such as HOMO-LUMO energies were calculated by using time-dependent density functional theory. Molecular electrostatic potential has been plotted to elucidate the reactive part of the molecule. Natural bond orbital analysis was performed to investigate the molecular stability. Non linear optical property of the molecule have been studied by calculating the electric dipole moment (μ) and the first hyperpolarizability (β) that results in the nonlinearity of the molecule. Copyright © 2014 Elsevier B.V. All rights reserved.
Graus, M; Grimm, M; Metzger, C; Dauth, M; Tusche, C; Kirschner, J; Kümmel, S; Schöll, A; Reinert, F
2016-04-08
Electron-phonon coupling is one of the most fundamental effects in condensed matter physics. We here demonstrate that photoelectron momentum mapping can reveal and visualize the coupling between specific vibrational modes and electronic excitations. When imaging molecular orbitals with high energy resolution, the intensity patterns of photoelectrons of the vibronic sidebands of molecular states show characteristic changes due to the distortion of the molecular frame in the vibronically excited state. By comparison to simulations, an assignment of specific vibronic modes is possible, thus providing unique information on the coupling between electronic and vibronic excitation.
Vibration Control of Flexible Mode for a Beam-Type Substrate Transport Robot
Directory of Open Access Journals (Sweden)
Cheol Hoon Park
2013-07-01
Full Text Available Beam-type substrate transport robots are widely used to handle substrates, especially in the solar cell manufacturing process. To reduce the takt time and increase productivity, accurate position control becomes increasingly important as the size of the substrate increases. However, the vibration caused by the flexible forks in beam-type robots interferes with accurate positioning, which results in long takt times in the manufacturing process. To minimize the vibration and transport substrates on the fork as fast as possible, the trajectories should be prevented from exciting the flexible modes of the forks. For this purpose, a fifth-order polynomial trajectory generator and input shaping were incorporated into the controller of the beam-type robot in this study. The flexible modes of the forks were identified by measuring the frequency response function (FRF, and the input shaping was designed so as not to excite the flexible modes. The controller was implemented by using MATLAB/xPC Target. In this paper, the design procedure of input shaping and its effectiveness for vibration attenuation in both “no load” and “load” cases is presented.
Multiple-mode nonlinear free and forced vibrations of beams using finite element method
Mei, Chuh; Decha-Umphai, Kamolphan
1987-01-01
Multiple-mode nonlinear free and forced vibration of a beam is analyzed by the finite element method. The geometric nonlinearity is investigated. Inplane displacement and inertia (IDI) are also considered in the formulation. Harmonic force matrix is derived and explained. Nonlinear free vibration can be simply treated as a special case of the general forced vibration by setting the harmonic force matrix equal to zero. The effect of the higher modes is more pronouced for the clamped supported beam than the simply supported one. Beams without IDI yield more effect of the higher modes than the one with IDI. The effects of IDI are to reduce nonlinearity. For beams with end supports restrained from axial movement (immovable cases), only the hardening type nonlinearity is observed. However, beams of small slenderness ratio (L/R = 20) with movable end supports, the softening type nonlinearity is found. The concentrated force case yields a more severe response than the uniformly distributed force case. Finite element results are in good agreement with the solution of simple elliptic response, harmonic balance method, and Runge-Kutte method and experiment.
Modeling of 1-3 piezoelectric composites operating in thickness-stretch vibration mode
Yang, Z.; Wang, H.; Zhao, C.; Zeng, D.
2015-06-01
For bulk piezoelectric ceramics plates, the fundamental thickness-stretch (TSt) waves are always coupled to the in-plane extension waves and the symmetric thickness-shear waves. The occurrence of these spurious modes in bulk piezoelectric ceramics plates is undesirable as it may interfere with the operation of transducers. 1-3 piezoelectric composites are promising candidates to suppress the spurious modes mentioned above. However, theoretical modelling of multiphase ceramic composite objects is very complex. In this study, a simple analytical TSt vibration model is constructed from three-dimensional equations of linear piezoelectricity. The mechanical damping is considered in the model by introducing a complex elastic constant. The performance of 1-3 piezoelectric composites is analysed and the electrical impedance results from theoretical and experimental analysis are compared. The results show that there is excellent agreement between the experimental electrical impedance and that obtained by the theoretical TSt vibration analysis. This indicates that 1-3 piezoelectric composites can be operated in a nearly pure TSt vibration mode near the fundamental resonance. The analytical model we present is valid for analysing 1-3 piezoelectric composites plates with large aspect ratios quickly and efficiently.
Eriksson, T J R; Ramadas, S N; Dixon, S M
2016-02-01
A unimorph flexural transducer design is proposed and tested with regard to mode shapes and frequencies. The transducers consist of a passive metal cap structure, and a thin piezoelectric disc, rigidly bonded to the inside. Extensive finite element (FE) modelling, and experimental 2D, time-resolved displacement measurements were done to characterise the transducers flexural properties, and to compare them to the analytical solutions of thin vibrating plates. Emphasis was put on characterising the passive layer of the unimorph structure, before bonding the piezoelectric element, to understand how the active element affects the behaviour of the flexing plate. A high power Nd:YAG laser was used to actuate the metal plate (non-contact), and the frequency content of the resulting displacement signal was analysed to identify the flexural modes. The non-axisymmetric modes, which are conventionally disregarded because of their unfavourable acoustic properties, were also taken into account. There was excellent agreement between the experimental results and the FE simulation data. There was good agreement with the analytical edge clamped plate model, but with some notable deviations, which have not previously been identified or commented upon. Specifically, the second axisymmetric mode is split into three separate modes, which is not explained by the traditional theory of vibrating plates. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.
DEFF Research Database (Denmark)
Sauer, Stephan P. A.; Paidarová, Ivana; Oddershede, Jens
2011-01-01
The vibrational g factor, that is, the nonadiabatic correction to the vibrational reduced mass, of LiH has been calculated for internuclear distances over a wide range. Based on multiconfigurational wave functions with a large complete active space and an extended set of gaussian type basis...... functions, these calculations yielded also the rotational g factor, the electric dipolar moment, and its gradient with internuclear distance for LiH in its electronic ground state X (1)Sigma(+). The vibrational g factor g(v) exhibits a pronounced minimum near internuclear distance R = 3.65 x 10(-10) m...
Numerical calculation of acoustic radiation from band-vibrating structures via FEM/FAQP method
Directory of Open Access Journals (Sweden)
GAO Honglin
2017-08-01
Full Text Available The Finite Element Method (FEM combined with the Frequency Averaged Quadratic Pressure method (FAQP are used to calculate the acoustic radiation of structures excited in the frequency band. The surface particle velocity of stiffened cylindrical shells under frequency band excitation is calculated using finite element software, the normal vibration velocity is converted from the surface particle velocity to calculate the average energy source (frequency averaged across intensity, frequency averaged across pressure and frequency averaged across velocity, and the FAQP method is used to calculate the average sound pressure level within the bandwidth. The average sound pressure levels are then compared with the bandwidth using finite element and boundary element software, and the results show that FEM combined with FAQP is more suitable for high frequencies and can be used to calculate the average sound pressure level in the 1/3 octave band with good stability, presenting an alternative to applying frequency-by-frequency calculation and the average frequency process. The FEM/FAQP method can be used as a prediction method for calculating acoustic radiation while taking the randomness of vibration at medium and high frequencies into consideration.
Energy Technology Data Exchange (ETDEWEB)
Fonda, H.N.; Oertling, W.A.; Salehi, A.; Chang, C.K.; Babcock, G.T. (Michigan State Univ., East Lansing (United States))
1990-12-19
The resonance Raman (RR) and infrared (IR) spectra of the Zn, Cu, and Ni complexes of trans-octaethylchlorin (OEC) reveal significant differences in the vibrational-mode properties of metallochlorins and metalloporphyrins. Modes with a contribution from the C{sub a}C{sub m} stretching coordinate are distinguished by their sensitivity to metal substitution and to selective d{sub 2} and d{sub 4} methine deuteration. Comparison of the resonance Raman spectrum of CuOEC with that of CuECI (ECI = etiochlorin I) identifies those modes with a contribution from C{sub b}C{sub b} and C{sub b}C{sub s} stretching and C{sub b}C{sub s} bending coordinates. The results obtained show that there is substantial mixing of C{sub a}C{sub m} and C{sub b}C{sub b} stretching character in the high-frequency modes of MOEC. The suggestion that the symmetry reduction that occurs in metallochlorins relative to metalloporphyrins produces vibrational-mode localization to specific hemispheres or quadrants of the macrocycle has been tested and confirmed by specific d{sub 2} deuteration at the methine carbons. Resonance Raman spectra of CuOEP-d{sub 2} (OEP = octaethylporphyrin) and CuOEP-d{sub 4} establish that, for a delocalized mode, methine d{sub 2} deuteration can be expected to produce half the d{sub 4} shift. For CuOEC, selective deuteration at the {alpha}{beta} and {gamma},{delta} methine positions causes different patterns of frequency shifts that indicate the extent of mode localization.
Ramya, K. R.; Pavan Kumar, G. V.; Venkatnathan, Arun
2012-05-01
The sI type methane clathrate hydrate lattice is formed during the process of nucleation where methane gas molecules are encapsulated in the form of dodecahedron (512CH4) and tetrakaidecahedron (51262CH4) water cages. The characterization of change in the vibrational modes which occur on the encapsulation of CH4 in these cages plays a key role in understanding the formation of these cages and subsequent growth to form the hydrate lattice. In this present work, we have chosen the density functional theory (DFT) using the dispersion corrected B97-D functional to characterize the Raman frequency vibrational modes of CH4 and surrounding water molecules in these cages. The symmetric and asymmetric C-H stretch in the 512CH4 cage is found to shift to higher frequency due to dispersion interaction of the encapsulated CH4 molecule with the water molecules of the cages. However, the symmetric and asymmetric O-H stretch of water molecules in 512CH4 and 51262CH4 cages are shifted towards lower frequency due to hydrogen bonding, and interactions with the encapsulated CH4 molecules. The CH4 bending modes in the 512CH4 and 51262CH4 cages are blueshifted, though the magnitude of the shifts is lower compared to modes in the high frequency region which suggests bending modes are less affected on encapsulation of CH4. The low frequency librational modes which are collective motion of the water molecules and CH4 in these cages show a broad range of frequencies which suggests that these modes largely contribute to the formation of the hydrate lattice.
Energy Technology Data Exchange (ETDEWEB)
Zhou, Shui-Ting; Huang, Hong-Wu [Hunan University, Changsha (China); Chiu, Yi-Jui; Yu, Guo-Fei [Xiamen University of Technology, Xiamen (China); Yang, Chia-Hao [Taipei Chengshih University of Science and Technology, Taipei (China); Jian, Sheng-Rui [I-Shou University, Kaohsiung (China)
2017-02-15
The Assumed mode method (AMM) and Finite element method (FEM) were used. Their results were compared to investigate the coupled shaft-torsion, disk-transverse, and blade-bending vibrations in a flexible-disk rotor system. The blades were grouped with a spring. The flexible-disk rotor system was divided into three modes of coupled vibrations: Shaft-disk-blade, disk-blade, and blade-blade. Two new modes of coupled vibrations were introduced, namely, lacing wires-blade and lacing wires-disk-blade. The patterns of change of the natural frequencies and mode shapes of the system were discussed. The results showed the following: first, mode shapes and natural frequencies varied, and the results of the AMM and FEM differed; second, numerical calculation results showed three influencing factors on natural frequencies, namely, the lacing wire constant, the lacing wire location, and the flexible disk; lastly, the flexible disk could affect the stability of the system as reflected in the effect of the rotational speed.
Dzung Nguyen, Sy; Kim, Wanho; Park, Jhinha; Choi, Seung-Bok
2017-04-01
Vibration control systems using smart dampers (SmDs) such as magnetorheological and electrorheological dampers (MRD and ERD), which are classified as the integrated structure-SmD control systems (ISSmDCSs), have been actively researched and widely used. This work proposes a new controller for a class of ISSmDCSs in which high accuracy of SmD models as well as increment of control ability to deal with uncertainty and time delay are to be expected. In order to achieve this goal, two formualtion steps are required; a non-parametric SmD model based on an adaptive neuro-fuzzy inference system (ANFIS) and a novel fuzzy sliding mode controller (FSMC) which can weaken the model error of the ISSmDCSs and hence provide enhanced vibration control performances. As for the formulation of the proposed controller, first, an ANFIS controller is desgned to identify SmDs using the improved control algorithm named improved establishing neuro-fuzzy system (establishing neuro-fuzzy system). Second, a new control law for the FSMC is designed via Lyapunov stability analysis. An application to a semi-active MRD vehicle suspension system is then undertaken to illustrate and evaluate the effectiveness of the proposed control method. It is demonstrated through an experimental realization that the FSMC proposed in this work shows superior vibration control performance of the vehicle suspension compared to other surveyed controller which have similar structures to the FSMC, such as fuzzy logic and sliding mode control.
Approximate natural vibration analysis of rectangular plates with openings using assumed mode method
Directory of Open Access Journals (Sweden)
Dae Seung Cho
2013-09-01
Full Text Available Natural vibration analysis of plates with openings of different shape represents an important issue in naval architecture and ocean engineering applications. In this paper, a procedure for vibration analysis of plates with openings and arbitrary edge constraints is presented. It is based on the assumed mode method, where natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. The presented solution represents an extension of a procedure for natural vibration analysis of rectangular plates without openings, which has been recently presented in the literature. The effect of an opening is taken into account in an intuitive way, i.e. by subtracting its energy from the total plate energy without opening. Illustrative numerical examples include dynamic analysis of rectangular plates with rectangular, elliptic, circular as well as oval openings with various plate thicknesses and different combinations of boundary conditions. The results are compared with those obtained by the finite element method (FEM as well as those available in the relevant literature, and very good agreement is achieved.
Energy Technology Data Exchange (ETDEWEB)
Schliesser, A; Anetsberger, G; Riviere, R; Arcizet, O; Kippenberg, T J [Max-Planck-Institut fuer Quantenoptik, Hans-Kopfermann-Strasse 1, 85748 Garching (Germany)], E-mail: tjk@mpq.mpg.de
2008-09-15
The inherent coupling of optical and mechanical modes in high finesse optical microresonators provides a natural, highly sensitive transduction mechanism for micromechanical vibration. Using homodyne and polarization spectroscopy techniques, we achieve shot-noise limited displacement sensitivities of 10{sup -19} m Hz{sup -1/2}. In an unprecedented manner, this enables the detection and study of a variety of mechanical modes, which are identified as radial breathing, flexural and torsional modes using three-dimensional finite element modeling. Furthermore, a broadband equivalent displacement noise is measured and found to agree well with models for thermorefractive noise in silica dielectric cavities. Implications for ground-state cooling, displacement sensing and Kerr squeezing are discussed.
Edighoffer, H. H.
1979-01-01
A component mode desynthesis procedure is developed for determining the unknown vibration characteristics of a structural component (i.e., a launch vehicle) given the vibration characteristics of a structural system composed of that component combined with a known one (i.e., a payload). At least one component static test has to be performed. These data are used in conjunction with the system measured frequencies and mode shapes to obtain the vibration characteristics of each component. The flight dynamics of an empty launch vehicle can be determined from measurements made on a vehicle/payload combination in conjunction with a static test on the payload.
Vila, F. D.; Rehr, J. J.
Effects of thermal vibrations are essential to obtain a more complete understanding of the properties of complex materials. For example, they are important in the analysis and simulation of x-ray absorption spectra (XAS). In previous work we introduced an ab initio approach for a variety of vibrational effects, such as crystallographic and XAS Debye-Waller factors, Debye and Einstein temperatures, and thermal expansion coefficients. This approach uses theoretical dynamical matrices from which the locally-projected vibrational densities of states are obtained using a Lanczos recursion algorithm. In this talk I present recent improvements to our implementation, which permit simulations of more complex materials with up to two orders of magnitude larger simulation cells. The method takes advantage of parallelization in calculations of the dynamical matrix with VASP. To illustrate these capabilities we discuss two problems of considerable interest: negative thermal expansion in ZrW2O8; and local inhomogeneities in the elastic properties of supported metal nanoparticles. Both cases highlight the importance of a local treatment of vibrational properties. Supported by DOE Grant DE-FG02-03ER15476, with computer support from DOE-NERSC.
Robustness of railway rolling stock speed calculation using ground vibration measurements
Directory of Open Access Journals (Sweden)
Kouroussis Georges
2015-01-01
Full Text Available Evaluating railway vehicle speed is an important task for both railway operators and researchers working in the area of vehicle/track dynamics, noise and vibration assessment. The objective of this paper is to present a new technique capable of automatically calculating train speed from vibration sensors placed at short or long distances from the track structure. The procedure combines three separate signal processing techniques to provide high precision speed estimates. In order to present a complete validation, the robustness of the proposed method is evaluate using synthetic railway vibration time histories generated using a previously validated vibration numerical model. A series of simulations are performed, analysing the effect of vehicle speed, singular wheel and rail surface defects, and soil configuration. Virtual conditions of measurement are also examined, taking into account external sources other than trains, and sensor response. It is concluded that the proposed method offers high performance for several train/track/soil arrangements. It is also used to predict train speeds during field trials performed on operational railway lines in Belgium and in UK.
Ramoji, Anuradha; Yenagi, Jayashree; Tonannavar, J
2008-03-01
Vibrational spectral measurements, namely, infrared (4000-400 cm(-1)) and Raman (3500-50 cm(-1)) spectra have been made for 2-Bromohydroquinone. Optimized geometrical structures, harmonic vibrational frequencies and intensities have been computed by the ab initio (RHF), B-based (BLYP, BP86) and B3-based (B3P86, B3LYP, B3PW91) density functional methods using 6-31G(d) basis set. A complete assignment of the observed spectra has been proposed. Coupling of vibrations has been determined by calculating potential energy distributions (PEDs) at BP86/6-31G(d) level of theory. In the computed equilibrium geometries by all the levels, the bond lengths and bond angles show changes in the neighborhood of Bromine. Similarly, the vibrational spectra exhibit some marked spectral features unlike in hydroquinone and phenol. On the other hand, the infrared spectrum shows a clear evidence of O-H...O bonding near 3200 cm(-1) as in hydroquinone. Evaluation of the theoretical methods demonstrates that all the levels but the RHF have reproduced frequencies fairly accurately in the 2000-500 cm(-1); below 500 cm(-1) the RHF has performed reasonably well.
Shundalau, M. B.; Chybirai, P. S.; Komyak, A. I.; Zazhogin, A. P.; Ksenofontov, M. A.; Umreiko, D. S.
2011-07-01
We present results of ab initio and DFT calculations of the structure and IR vibrational spectra of the monomer and dimers of N,N-dimethylformamide (DMF). The calculations were carried out in the B3LYP/cc-pVDZ approximation with subsequent force-field scaling. The calculated characteristics of the vibrational spectra of DMF show satisfactory agreement with experimental values, allowing them to be used in spectral and structural analysis.
Energy Technology Data Exchange (ETDEWEB)
Saja, D; Joe, I Hubert; Jayakumar, V S [Department of Physics, Mar Ivanios College, Thiruvananthapuram-695015, Kerala (India)
2006-01-01
The NIR-FT Raman, FT-IR spectral analysis of potential NLO material P-Amino Acetanilide is carried out by density functional computations. The optimized geometry shows that NH2 and NHCOCH3 groups substituted in para position of phenyl ring are non-planar which predicts maximum conjugation of molecule with donor and acceptor groups. Vibrational analysis reveals that simultaneous IR and Raman activation of the phenyl ring modes also provide evidence for the charge transfer interaction between the donors and the acceptor can make the molecule highly polarized and the intra molecular charge transfer interaction must be responsible for the NLO properties of PAA.
Dai, Peng; Jiang, Nan; Tan, Ren-Xiang
2016-01-01
Elucidation of absolute configuration of chiral molecules including structurally complex natural products remains a challenging problem in organic chemistry. A reliable method for assigning the absolute stereostructure is to combine the experimental circular dichroism (CD) techniques such as electronic and vibrational CD (ECD and VCD), with quantum mechanics (QM) ECD and VCD calculations. The traditional QM methods as well as their continuing developments make them more applicable with accuracy. Taking some chiral natural products with diverse conformations as examples, this review describes the basic concepts and new developments of QM approaches for ECD and VCD calculations in solution and solid states.
Yang, Jingyu; Lin, Jiahui; Liu, Yuejun; Yang, Kang; Zhou, Lanwei; Chen, Guoping
2017-08-01
It is well known that intelligent control theory has been used in many research fields, novel modeling method (DROMM) is used for flexible rectangular active vibration control, and then the validity of new model is confirmed by comparing finite element model with new model. In this paper, taking advantage of the dynamics of flexible rectangular plate, a two-loop sliding mode (TSM) MIMO approach is introduced for designing multiple-input multiple-output continuous vibration control system, which can overcome uncertainties, disturbances or unstable dynamics. An illustrative example is given in order to show the feasibility of the method. Numerical simulations and experiment confirm the effectiveness of the proposed TSM MIMO controller.
Effects of poroelastic coefficients on normal vibration modes in vocal-fold tissues.
Tao, Chao; Liu, Xiaojun
2011-02-01
The vocal-fold tissue is treated as a transversally isotropic fluid-saturated porous material. Effects of poroelastic coefficients on eigenfrequencies and eigenmodes of the vocal-fold vibration are investigated using the Ritz method. The study demonstrates that the often-used elastic model is only a particular case of the poroelastic model with an infinite fluid-solid mass coupling parameter. The elastic model may be considered appropriate for the vocal-fold tissue when the absolute value of the fluid-solid mass coupling parameter is larger than 10(5) kg/m(3). Otherwise, the poroelastic model may be more accurate. The degree of compressibility of the vocal tissue can also been described by the poroelastic coefficients. Finally, it is revealed that the liquid and solid components in a poroelastic model could have different modal shapes when the coupling between them is weak. The mode decoupling could cause desynchronization and irregular vibration of the folds.
Goos-Hänchen effect for optical vibrational modes in a semiconductor structure
Villegas, Diosdado; Arriaga, J.; de León-Pérez, Fernando; Pérez-Álvarez, R.
2017-03-01
We study the tunneling of optical vibrational modes with transverse horizontal polarization that impinge, at a given angle, on a semiconductor heterostructure. We find a large influence of the Goos-Hänchen shift on tunneling times. In particular, a Goos-Hänchen shift larger than the barrier thickness is reported for the first time. The relation between Goos-Hänchen and Hartman effects is also discussed. The identity that equals the dwell time to the sum of transmission and interference times, previously derived for one-dimensional tunneling problems, is extended to the two-dimensional case. Closed-form expressions are developed for the relevant quantities. Instead of using the standard approach, the interference time is computed from the vibrational energy density. The present study could be useful for the design of semiconductor devices.
Yamada, Toshiki; Tominari, Yukihiro; Tanaka, Shukichi; Mizuno, Maya; Fukunaga, Kaori
2014-11-17
The terahertz and infrared frequency vibration modes of room-temperature ionic liquids with imidazolium cations and halogen anions were extensively investigated. There is an intermolecular vibrational mode between the imidazolium ring of an imidazolium cation, a halogen atomic anion with a large absorption coefficient and a broad bandwidth in the low THz frequency region (13-130 cm(-1)), the intramolecular vibrational modes of the alkyl-chain part of an imidazolium cation with a relatively small absorption coefficient in the mid THz frequency region (130-500 cm(-1)), the intramolecular skeletal vibrational modes of an imidazolium ring affected by the interaction between the imidazolium ring, and a halogen anion with a relatively large absorption coefficient in a high THz frequency region (500-670 cm(-1)). Interesting spectroscopic features on the interaction between imidazolium cations and halogen anions was also obtained from spectroscopic studies at IR frequencies (550-3300 cm(-1)). As far as the frequency of the intermolecular vibrational mode is concerned, we found the significance of the reduced mass in determining the intermolecular vibration frequency.
A disk-pivot structure micro piezoelectric actuator using vibration mode B11.
Chu, Xiangcheng; Ma, Long; Li, Longtu
2006-12-22
Micro piezoelectric actuator using vibration mode B(11) (B(mn), where m is the number of nodal circles, n is the nodal diameters) is designed. Different from conventional wobble-type ultrasonic motor using piezoelectric rod or cylinder, piezoelectric disc is used to excite wobble modes and metal cylinder stator is used to amplify the transverse displacement, metal rod rotor is actuated to rotate. The outer diameter of the actuator is 14mm. There are features such as low drive voltage, micromation, and convenient control of wobble state by modifying the structure of stator, etc. Finite element analysis (FEA) of the stator has been made. It is found that the resonant frequency of vibration mode B(11) is 49.03kHz, which is measured at 45.7kHz by the laser vibrometer and impedance analyzer. The rotation speed has been measured, which could be as high as 10,071rpm under an alternating current 100V. Such piezoelectric actuator can be optimized and adjusted to fit practical conditions. It can be applied in the fields of precise instrument, bioengineering and other micro actuator system.
Li, Bin; Bian, Wensheng
2008-07-01
Full-dimensional quantum calculations of vibrational states of C2H2 and C2D2 are performed in the high-energy region (above 20400cm-1 relative to the acetylene minimum). The theoretical scheme is a combination of several methods. To exploit the full parity and permutation symmetry, the CC-HH diatom-diatom Jacobi coordinates are chosen; phase space optimization in combination with physical considerations is used to obtain an efficient radial discrete variable representation, whereas a basis contraction scheme is applied for angular coordinates. The preconditioned inexact spectral transform method combined with an efficient preconditioner is employed to compute eigenstates within a desired spectral window. The computation is efficient. More definite assignments on vinylidene states than previous studies are acquired using the normal mode projection; in particular, a consistent analysis of the ν1 (symmetric CH stretch) state is provided. The computed vinylidene vibrational energy levels are in general good agreement with experiment, and several vinylidene states are reported for the first time.
Energy Technology Data Exchange (ETDEWEB)
Cobut, V.; Frongillo, Y.; Jay-Gerin, J.-P. (Sherbrooke Univ., PQ (Canada). Faculte de Medecine); Patau, J.-P. (Toulouse-3 Univ., 31 (France))
1992-12-01
An energy spectrum of ''subexcitation electrons'' produced in liquid water by electrons with initial energies of a few keV is obtained by using a Monte Carlo transport simulation calculation. It is found that the introduction of vibrational-excitation cross sections leads to the appearance of a sharp peak in the probability density function near the electronic-excitation threshold. Electrons contributing to this peak are shown to be more naturally described if a novel energy spectrum, that we propose to name ''vibrationally-relaxing electron'' spectrum, is introduced. The corresponding distribution function is presented, and an empirical expression of it is given. (author).
Pan, Minghao; Yang, Yongmin; Guan, Fengjiao; Hu, Haifeng; Xu, Hailong
2017-01-01
The accurate monitoring of blade vibration under operating conditions is essential in turbo-machinery testing. Blade tip timing (BTT) is a promising non-contact technique for the measurement of blade vibrations. However, the BTT sampling data are inherently under-sampled and contaminated with several measurement uncertainties. How to recover frequency spectra of blade vibrations though processing these under-sampled biased signals is a bottleneck problem. A novel method of BTT signal processing for alleviating measurement uncertainties in recovery of multi-mode blade vibration frequency spectrum is proposed in this paper. The method can be divided into four phases. First, a single measurement vector model is built by exploiting that the blade vibration signals are sparse in frequency spectra. Secondly, the uniqueness of the nonnegative sparse solution is studied to achieve the vibration frequency spectrum. Thirdly, typical sources of BTT measurement uncertainties are quantitatively analyzed. Finally, an improved vibration frequency spectra recovery method is proposed to get a guaranteed level of sparse solution when measurement results are biased. Simulations and experiments are performed to prove the feasibility of the proposed method. The most outstanding advantage is that this method can prevent the recovered multi-mode vibration spectra from being affected by BTT measurement uncertainties without increasing the probe number. PMID:28758952
Resonant electron-impact excitation of vibrational modes in polyatomic molecules
Cartwright, David C.; Trajmar, Sandor
1996-04-01
Measured differential cross sections (DCSs) for electron-impact excitation of bending vibrational modes involving an odd number of vibrational quanta in 0953-4075/29/8/018/img5 by 4 eV incident energy electrons display a strong trend to zero for forward and backward scattering which is characteristic of `symmetry-forbidden' transitions. This DCS behaviour is postulated here to be produced by a Feshbach resonant mechanism involving a low-lying bent excited state of 0953-4075/29/8/018/img5. The model described here identifies three additional low-lying bent excited states of 0953-4075/29/8/018/img5 which could also be parent states for core-excited Feshbach resonances, one of which may play a role in dissociative attachment in this 3.5 - 5.0 eV energy region. The resonant vibrational excitation mechanism proposed here is also believed to be operative in other polyatomic molecules and could be investigated by performing selected electron energy-loss measurements within the lowest energy resonance regions of the molecules 0953-4075/29/8/018/img8 and 0953-4075/29/8/018/img9.
Aouani, Heykel; Šípová, Hana; Rahmani, Mohsen; Navarro-Cia, Miguel; Hegnerová, Kateřina; Homola, Jiří; Hong, Minghui; Maier, Stefan A
2013-01-22
Optical antennas represent an enabling technology for enhancing the detection of molecular vibrational signatures at low concentrations and probing the chemical composition of a sample in order to identify target molecules. However, efficiently detecting different vibrational modes to determine the presence (or the absence) of a molecular species requires a multispectral interrogation in a window of several micrometers, as many molecules present informative fingerprint spectra in the mid-infrared between 2.5 and 10 μm. As most nanoantennas exhibit a narrow-band response because of their dipolar nature, they are not suitable for such applications. Here, we propose the use of multifrequency optical antennas designed for operating with a bandwidth of several octaves. We demonstrate that surface-enhanced infrared absorption gains in the order of 10(5) can be easily obtained in a spectral window of 3 μm with attomolar concentrations of molecules, providing new opportunities for ultrasensitive broadband detection of molecular species via vibrational spectroscopy techniques.
Sub-THz spectroscopic characterization of vibrational modes in artificially designed DNA monocrystal
Sizov, Igor; Rahman, Masudur; Gelmont, Boris; Norton, Michael L.; Globus, Tatiana
2013-11-01
Sub-terahertz (sub-THz) vibrational spectroscopy is a new spectroscopic branch for characterizing biological macromolecules. In this work, highly resolved sub-THz resonance spectroscopy is used for characterizing engineered molecular structures, an artificially designed DNA monocrystal, built from a short DNA sequence. Using a recently developed frequency domain spectroscopic instrument operating at room temperature with high spectral and spatial resolution, we demonstrated very intense and specific spectral lines from a DNA crystal in general agreement with a computational molecular dynamics (MD) simulation of a short double stranded DNA fragment. The spectroscopic signature measured in the frequency range between 310 and 490 GHz is rich in well resolved and reproducible spectral features thus demonstrating the capability of THz resonance spectroscopy to be used for characterizing custom macromolecules and structures designed and implemented via nanotechnology for a wide variety of application domains. Analysis of MD simulation indicates that intense and narrow vibrational modes with atomic movements perpendicular (transverse) and parallel (longitudinal) to the long DNA axis coexist in dsDNA, with much higher contribution from longitudinal vibrations.
Application of empirical mode decomposition method for characterization of random vibration signals
Directory of Open Access Journals (Sweden)
Setyamartana Parman
2016-07-01
Full Text Available Characterization of finite measured signals is a great of importance in dynamical modeling and system identification. This paper addresses an approach for characterization of measured random vibration signals where the approach rests on a method called empirical mode decomposition (EMD. The applicability of proposed approach is tested in one numerical and experimental data from a structural system, namely spar platform. The results are three main signal components, comprising: noise embedded in the measured signal as the first component, first intrinsic mode function (IMF called as the wave frequency response (WFR as the second component and second IMF called as the low frequency response (LFR as the third component while the residue is the trend. Band-pass filter (BPF method is taken as benchmark for the results obtained from EMD method.
Robbins, Timothy J.; Wang, Yongmei; Yao, Qi-Zheng; Wang, Zhao-Hui; Cheng, Jingcai; Li, Ying-Sing
2013-09-01
For centuries Danggui Longhui Wan has been used to treat chronic ailments, such as myelocytic leukemia. In the 1960s, the active ingredient in Danggui Longhui Wan was isolated and identified as indirubin. Indirubin has shown potent inhibition of cyclin-dependent kinase through binding to the ATP-binding site. However, indirubin shows poor solubility and low absorption, hence many derivatives have been developed to enhance these properties. One such derivative is 5‧-chloro-1-isopropyl-7-azaindirubin-3‧-oxime (CIADO), investigated in the current work. Infrared and Raman spectra were collected and compared with predicted spectra using density functional theory. Based on theoretical calculations, the most stable form of CIADO isomer is found to be cis (Z) and trans (E) with respect to the ring system linkage and the 3‧-oxime functional group respectively. Also observed were two distinct internal rotational minima for the 1-isoprooyl group separated by a large energy barrier. The presence of two distinct isopropyl conformations observed in our calculations was confirmed with temperature-dependent IR experiments. Assignment of experimental vibrational modes was carried out based on functional group displacement observed in the calculations.
Stanke, Monika; Adamowicz, Ludwik
2014-10-01
We report very accurate calculations of the complete pure vibrational spectrum of the T2 molecule with an approach where the Born-Oppenheimer (BO) approximation is not assumed. As the considered states correspond to the zero total angular momentum, their non-BO wave functions are spherically symmetric and are expanded in terms of all-particle, one-center, spherically symmetric explicitly correlated Gaussian functions multiplied by even nonnegative powers of the internuclear distance. The nonrelativistic energies of the states obtained in the non-BO calculations are corrected for the relativistic effects of the order of α2 (where α is the fine structure constant) calculated as expectation values of the operators representing these effects.
Stanke, Monika; Adamowicz, Ludwik
2014-10-21
We report very accurate calculations of the complete pure vibrational spectrum of the T2 molecule with an approach where the Born-Oppenheimer (BO) approximation is not assumed. As the considered states correspond to the zero total angular momentum, their non-BO wave functions are spherically symmetric and are expanded in terms of all-particle, one-center, spherically symmetric explicitly correlated Gaussian functions multiplied by even nonnegative powers of the internuclear distance. The nonrelativistic energies of the states obtained in the non-BO calculations are corrected for the relativistic effects of the order of α(2) (where α is the fine structure constant) calculated as expectation values of the operators representing these effects.
Weber, F.; Distl, H.
2015-11-01
This paper derives an approximate collocated control solution for the mitigation of multi-mode cable vibration by semi-active damping with negative stiffness based on the control force characteristics of clipped linear quadratic regulator (LQR). The control parameters are derived from optimal modal viscous damping and corrected in order to guarantee that both the equivalent viscous damping coefficient and the equivalent stiffness coefficient of the semi-active cable damper force are equal to their desired counterparts. The collocated control solution with corrected control parameters is numerically validated by free decay tests of the first four cable modes and combinations of these modes. The results of the single-harmonic tests demonstrate that the novel approach yields 1.86 times more cable damping than optimal modal viscous damping and 1.87 to 2.33 times more damping compared to a passive oil damper whose viscous damper coefficient is optimally tuned to the targeted mode range of the first four modes. The improvement in case of the multi-harmonic vibration tests, i.e. when modes 1 and 3 and modes 2 and 4 are vibrating at the same time, is between 1.55 and 3.81. The results also show that these improvements are obtained almost independent of the cable anti-node amplitude. Thus, the proposed approximate real-time applicable collocated semi-active control solution which can be realized by magnetorheological dampers represents a promising tool for the efficient mitigation of stay cable vibrations.
Hédoux, Alain; Guinet, Yannick; Carpentier, Laurent; Paccou, Laurent; Derollez, Patrick; Brandán, Silvia Antonia
2017-06-01
In this work, three monomeric forms of arabinitol, usually named arabitol, and their dimeric species have been structural and vibrationally studied by using the micro-Raman spectra in the solid phase accomplished with theoretical calculations based on the theory of the functional of the density (DFT). The hybrid B3LYP method was used for all the calculations together with the 6-31G* and 6-311++g** basis sets. Two different L structures with minima energies were predicted in accordance to the two polymorphic structures revealed by recent X-ray diffraction experiments. The studies by natural bond orbital (NBO) calculations reveals high stabilities of the L form as compared with the D one but the topological properties by using the atoms in molecules (AIM) suggest a higher stability of the D form due to a strong H bond interactions. The scaled mechanical force fields (SQMFF) procedure was used to perform the complete vibrational assignments for the monomeric forms and their dimer. On the other hand, the similarity in the gap values computed for the three forms of arabitol with those observed for sucrose, trehalose, maltose and lactose in gas phase at the same level of theory could partially explain the sweetening property of this alcohol. In addition, the influences of the size of the basis set on some properties were evidenced.
Kwon, Oh Kuen; Hwang, Ho Jung; Park, Jungcheol
2013-12-01
We investigate tunable graphene-nanoribbon (GNR)-resonators actuated in the tangential direction, and their properties are compared to those actuated in the normal direction, via classical molecular dynamics simulations. These GNR-resonators can be tuned both by the initial strain and the gate. The relationships between the frequency-versus-gate and the initial strain in this work are in good agreement with those in previous experimental works. With increasing initial strain, the resonance frequencies are greatly upshifted, whereas the tunable ranges in frequency are greatly decreased. The tunability in the dynamic operating range decreases with increasing initial strain. For very small strains, the GNR-resonators have large dynamic operating ranges in the normal vibration mode, and for large strains, the GNR-resonators have higher operating frequencies in the tangential vibration mode. The resonance frequencies are estimated by a classical continuum model, with tension acting on the GNR-resonators consisting of both initial tension by initial strain and induced tension by gate actuating.
Portnov, Alexander; Epshtein, Michael; Bar, Ilana
2017-06-01
Nonadiabatic processes, dominated by dynamic passage of reactive fluxes through conical intersections (CIs) are considered to be appealing means for manipulating reaction paths. One approach that is considered to be effective in controlling the course of dissociation processes is the selective excitation of vibrational modes containing a considerable component of motion. Here, we have chosen to study the predissociation of the model test molecule, methylamine and its deuterated isotopologues, excited to well-characterized quantum states on the first excited electronic state, S_{1}, by following the N-H(D) bond fission dynamics through sensitive H(D) photofragment probing. The branching ratios between slow and fast H(D) photofragments, the internal energies of their counter radical photofragments and the anisotropy parameters for fast H photofragments, confirm correlated anomalies for predissociation initiated from specific rovibronic states, reflecting the existence of a dynamic resonance in each molecule. This resonance strongly depends on the energy of the initially excited rovibronic states, the evolving vibrational mode on the repulsive S_{1} part during N-H(D) bond elongation, and the manipulated passage through the CI that leads to radicals excited with C-N-H(D) bending and preferential perpendicular bond breaking, relative to the photolyzing laser polarization, in molecules containing the NH_{2} group. The indicated resonance plays an important role in the bifurcation dynamics at the CI and can be foreseen to exist in other photoinitiated processes and to control their outcome.
Inverse boundary element calculations based on structural modes
DEFF Research Database (Denmark)
Juhl, Peter Møller
2007-01-01
The inverse problem of calculating the flexural velocity of a radiating structure of a general shape from measurements in the field is often solved by combining a Boundary Element Method with the Singular Value Decomposition and a regularization technique. In their standard form these methods sol...
Red Giant Oscillations: Stellar Models and Mode Frequency Calculations
DEFF Research Database (Denmark)
Jendreieck, A.; Weiss, A.; Aguirre, Victor Silva
2012-01-01
We present preliminary results on modelling KIC 7693833, the so far most metal-poor red-giant star observed by {\\it Kepler}. From time series spanning several months, global oscillation parameters and individual frequencies were obtained and compared to theoretical calculations. Evolution models ...
Approach to calculate normal modes by decomposing the dyadic Green's function.
Yu, Wenhai; Yue, Wencheng; Yao, Peijun; Lu, Yonghua; Liu, Wen
2014-11-03
Normal mode is a very fundamental notion in quantum and classical optics. In this paper, we present a method to calculate normal modes by decomposing dyadic Green's function, where the modes are excited by dipoles. The modes obtained by our method can be directly normalized and their degeneracies can be easily removed. This method can be applied to many theoretical descriptions of cavity electrodynamics and is of interest to nanophotonics.
Directory of Open Access Journals (Sweden)
Ehsan Maani Miandoab
2013-01-01
Full Text Available Two different control methods, namely, adaptive sliding mode control and impulse damper, are used to control the chaotic vibration of a block on a belt system due to the rate-dependent friction. In the first method, using the sliding mode control technique and based on the Lyapunov stability theory, a sliding surface is determined, and an adaptive control law is established which stabilizes the chaotic response of the system. In the second control method, the vibration of this system is controlled by an impulse damper. In this method, an impulsive force is applied to the system by expanding and contracting the PZT stack according to efficient control law. Numerical simulations demonstrate the effectiveness of both methods in controlling the chaotic vibration of the system. It is shown that the settling time of the controlled system using impulse damper is less than that one controlled by adaptive sliding mode control; however, it needs more control effort.
Cui, Qiang; Karplus, Martin
2000-01-01
Analytical second derivatives for combined QM/MM calculations have been formulated and implemented in the CHARMM program interfaced with the ab initio quantum mechanical GAMESS and CADPAC programs. This makes possible evaluation of vibrational frequencies and infrared intensities in large systems that cannot be treated effectively by QM or MM alone; examples are polarizable molecules in solution and substrates or transition states in enzymes. Test calculations on a number of systems, including formamide in water, butanol, a model transition state structure for triosephosphate isomerase and the active site model of myoglobin, show that the MM description of the environment can capture much of its polarization effects on the QM region. Thus the implementation of analytical second derivatives within the QM/MM framework has considerable potential for the study of large systems.
Ro-vibrational spectra of C2H2 based on variational nuclear motion calculations
Urru, Andrea; Kozin, Igor N.; Mulas, Giacomo; Braams, Bastiaan J.; Tennyson, Jonathan
2010-08-01
A published ab initio-based potential energy surface and newly constructed dipole moment surface of acetylene have been used to compute vibrational band intensities. The line intensity calculations employed the variational nuclear motion code WAVR4 for computation of wave functions and energy levels, and a newly developed code DIPOLE4 for computation of dipole transitions. Owing to the high computational cost of J > 0 transitions using direct variational methods only J = 0 and J = 1 states and transitions have been computed variationally. The intensities of J > 1 transitions were extrapolated from J = 0 and J = 1 using Hönl-London coefficients. The resulting effective rotational constants B and transition intensities are compared with experimental data for the (3ν4 + ν5) combination band, the ν3 and the ν5 fundamental band. The prospects of using this procedure for extensive calculations of a hot line list, important for cool stars and extrasolar planets are discussed.
Charge-sensitive vibrational modes in the (EDT-TTF-OX)2AsF6 chiral molecular conductors
Olejniczak, Iwona; Frąckowiak, Arkadiusz; Matysiak, Jacek; Madalan, Augustin; Pop, Flavia; Avarvari, Narcis
2014-03-01
Infrared and Raman spectra of three chiral molecular conductors (EDT-TTF-OX)2AsF6, comprising of two salts based on enantiopure EDT-TTF-OX donor molecules and one based on their racemic mixture, have been measured as a function of temperature. In the frequency range of the C=C stretching vibrations of EDT-TTF-OX, charge-sensitive modes are identified based on theoretical calculations for neutral and oxidized EDT-TTF-OX using density functional theory (DFT) methods. The positions of C=C stretching modes in both Raman and infrared spectra of the (EDT-TTF-OX)2AsF6 materials are analyzed assuming a linear relationship between the frequency and charge of the molecule. The charge density on the EDTTTF-OX donor molecule is estimated to be +0.5 in all investigated materials and does not change with temperature. Therefore we suggest, that M-I transition observed in (EDT-TTF-OX)2AsF6 chiral molecular conductors at low temperature is not related to the charge ordering mechanism.
Hu, Junhui; Jong, Januar; Zhao, Chunsheng
2010-01-01
To increase the vibration energy-harvesting capability of the piezoelectric generator based on a cantilever beam, we have proposed a piezoelectric generator that not only uses the strain change of piezoelectric components bonded on a cantilever beam, but also employs the weights at the tip of the cantilever beam to hit piezoelectric components located on the 2 sides of weights. A prototype of the piezoelectric generator has been fabricated and its characteristics have been measured and analyzed. The experimental results show that the piezoelectric components operating in the hit mode can substantially enhance the energy harvesting of the piezoelectric generator on a cantilever beam. Two methods are used and compared in the management of rectified output voltages from different groups of piezoelectric components. In one of them, the DC voltages from rectifiers are connected in series, and then the total DC voltage is applied to a capacitor. In another connection, the DC voltage from each group is applied to different capacitors. It is found that 22.3% of the harvested energy is wasted due to the series connection. The total output electric energy of our piezoelectric generator at nonresonance could be up to 43 nJ for one vibration excitation applied by spring, with initial vibration amplitude (0-p) of 18 mm and frequency of 18.5 Hz, when the rectified voltages from different groups of piezoelectric components are connected to their individual capacitors. In addition, the motion and impact of the weights at the tip of the cantilever beam are theoretically analyzed, which well explains the experimental phenomena and suggests the measures to improve the generator.
Passarello, Marco; Abbate, Sergio; Longhi, Giovanna; Lepri, Susan; Ruzziconi, Renzo; Nicu, Valentin Paul
2014-06-19
The role played by the C*-H based modes (C* being the chiral carbon atom) and the large amplitude motions in the vibrational absorption (VA) and vibrational circular dichroism (VCD) spectra is investigated. The example of an adduct of dimethyl fumarate and anthracene, i.e., dimethyl-(+)-(11R,12R)-9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboxylate, and two deuterated isotopomers thereof specially synthesized for this goal, are considered. By comparing the experimental and DFT calculated spectra of the undeuterated and deuterated species, we demonstrate that the C*-H bending, rocking, and stretching modes in the VA and VCD spectra are clearly identified in well defined spectroscopic features. Further, significant information about the conformer distribution is gathered by analyzing the VA and VCD data of both the fingerprint and the C-H stretching regions, with particular attention paid to the band shape data. Effects related to the large amplitude motions of the two methoxy moieties have been simulated by performing linear transit (LT) calculations, which consists of varying systematically the relative positions of the two methoxy moieties and calculating VCD spectra for the partially optimized structures obtained in this way. The LT method allows one to improve the quality of calculated spectra, as compared to experimental results, especially in regard to relative intensities and bandwidths.
A magnetic damper for first mode vibration reduction in multimass flexible rotors
Kasarda, M. E. F.; Allaire, P. E.; Humphris, R. R.; Barrett, L. E.
1989-01-01
Many rotating machines such as compressors, turbines and pumps have long thin shafts with resulting vibration problems, and would benefit from additional damping near the center of the shaft. Magnetic dampers have the potential to be employed in these machines because they can operate in the working fluid environment unlike conventional bearings. An experimental test rig is described which was set up with a long thin shaft and several masses to represent a flexible shaft machine. An active magnetic damper was placed in three locations: near the midspan, near one end disk, and close to the bearing. With typical control parameter settings, the midspan location reduced the first mode vibration 82 percent, the disk location reduced it 75 percent and the bearing location attained a 74 percent reduction. Magnetic damper stiffness and damping values used to obtain these reductions were only a few percent of the bearing stiffness and damping values. A theoretical model of both the rotor and the damper was developed and compared to the measured results. The agreement was good.
Complex modes of vibration due to small-scale damping in a guitar topplate
Directory of Open Access Journals (Sweden)
J. A. Torres
2010-04-01
Full Text Available Modal analysis is one of the preeminent methods used by scientists and engineers to study vibrating structures. The frequency responsefunctions obtained through this method, are, in general, complex-valued. There is, however, no agreed-upon interpretation given to thereal and imaginary parts of these functions, even though it is acknowledged that their relative magnitude for different frequencies is relatedto the behaviour of the corresponding modes. A simple model is deduced to describe the shape of the spectrum associated with afinite-length time-signal. There is very good agreement between results obtained using this model and numerical results obtained for,in this case, the vibration of a guitar top-plate using finite element methods. One interpretation of the relative magnitudes of the real and imaginary parts of the frequency response functions is advanced. It is found that stationary-wave behaviour is associated with the dominance of the real or imaginary part; traveling-wave behaviour, on the other hand, occurs when the real and imaginary parts are of the same order of magnitude, as long as the scale of damping is large enough and resonance peaks in the spectrum are close enough.
Directory of Open Access Journals (Sweden)
Ming-Chang Pai
2012-01-01
Full Text Available Input shaping technique is widely used in reducing or eliminating residual vibration of flexible structures. The exact elimination of the residual vibration via input shaping technique depends on the amplitudes and instants of impulse application. However, systems always have parameter uncertainties which can lead to performance degradation. In this paper, a closed-loop input shaping control scheme is developed for uncertain flexible structures. The algorithm is based on input shaping control and adaptive sliding mode control. The proposed scheme does not need a priori knowledge of upper bounds on the norm of the uncertainties, but estimates them by using the adaptation technique. This scheme guarantees closed-loop system stability, and yields good performance and robustness in the presence of parameter uncertainties and external disturbances as well. Furthermore, it is shown that increasing the robustness to parameter uncertainties does not lengthen the duration of the impulse sequence. Simulation results demonstrate the efficacy of the proposed closed-loop input shaping control scheme.
Local vibration modes of shallow thermal donors in nitrogen-doped CZ silicon crystals
Energy Technology Data Exchange (ETDEWEB)
Inoue, N. [RIAST, Osaka Prefecture University, Sakai, 599-8570 (Japan) and Nitrogen Measurement WG, JEITA, Tokyo, 101-0062 (Japan)]. E-mail: inouen@riast.osakafu-u.ac.jp; Nakatsu, M. [RIAST, Osaka Prefecture University, Sakai, 599-8570 (Japan); Ono, H. [Japan Fine Ceramics Center, Tokyo, 105-0003 (Japan); Nitrogen Measurement WG, JEITA, Tokyo, 101-0062 (Japan)
2006-04-01
Local vibration mode (LVM) infrared absorption from shallow thermal donors (STD) composed of nitrogen-oxygen complexes in nitrogen-doped CZ silicon crystals was examined. The samples whose STD concentration had been determined were measured. The sample dependence of the peaks at 810 and 1018cm{sup -1} was similar to that of STD but the estimated concentration was slightly higher. New LVM peaks were found at 855, 973, 982, 1002cm{sup -1} and so on. Their magnitude and sample dependence agreed well with those of STD. Annealing temperature dependence of other samples supported the results. Annealing time dependence of STD concentration at 650 deg. C was examined. STD peaks at 250, 242 and those at 240, 234 and 238cm{sup -1} behaved differently, suggesting the presence of two kinds of STD origin.
National Research Council Canada - National Science Library
Jianghong Xue; Fei Xia; Jun Ye; Jianwen Zhang; Shuhua Chen; Ying Xiong; Zuyuan Tan; Renhuai Liu; Hong Yuan
2017-01-01
This paper presents a multiscale approach to study the nonlinear vibration of fiber reinforced composite laminates containing an embedded, through-width delamination dividing the laminate into four sub-laminates...
Directory of Open Access Journals (Sweden)
Yakov Tseytlin
2012-05-01
Full Text Available Flexible structures are the main components in many precision measuring and research systems. They provide miniaturization, repeatability, minimal damping, low measuring forces, and very high resolution. This article focuses on the modeling, development, and comparison of three typical flexible micro- nano-structures: flexible helicoids, atomic force microscopy (AFM cantilevers, and concave notch hinges. Our theory yields results which allow us to increase the accuracy and functionality of these structures in new fields of application such as the modeling of helicoidal DNA molecules’ mechanics, the definition of instantaneous center of rotation in concave flexure notch hinges, and the estimation of the increase of spring constants and resolution at higher mode vibration in AFM cantilevers with an additional concentrated and end extended mass. We developed the original kinetostatic, reverse conformal mapping of approximating contours, and non-linear thermomechanical fluctuation methods for calculation, comparison, and research of the micromechanical structures. These methods simplify complicated solutions in micro elasticity but provide them with necessary accuracy. All our calculation results in this article and in all corresponding referenced author’s publications are in a good agreement with experimental and finite element modeling data within 10% or less.
Krajewski, Piotr; Flaga, Łukasz; Flaga, Andrzej
2018-01-01
The paper presents aerodynamic calculations of the Sienna Towers high buildings complex in Warsaw using authors mathematical model of the considered issue. Human vibrations comfort criteria were checked according to ISO/6897. Dynamic coefficients used in the calculations were obtained from wind tunnel tests.
Proskuryakov, K. N.
2017-11-01
Created new scientific direction: “Diagnosis, prognosis and prevention of vibration - acoustic resonances in the nuclear power plant (NPP) equipment. The possibility of using methods for calculating and analyzing electric oscillation systems in the study of the properties of acoustic systems with a two-phase medium is proved, based on the similarity of the differential equations describing the state of these systems. Is shown that the developed methods can be used to predict and prevent the occurrence of vibration - acoustic resonances in the NPP equipment. Is shown that the volume of pressurizer at NPPs with VVER and PWR as well as boiling water reactor that exploded at Japan’s NPP Fukushima Daiichi is a Helmholtz resonator, which contain water and steam volumes and able many times increases the impact on them of outside periodic oscillations. Paper presents most important results published long before the severe accidents at NPPs Three Mile Island (TMI), Chernobyl and Fukushima Daiichi that could be used for the prediction of a severe accident scenario, identification of measuring data and process control in order to minimize the damage. Worked out results also could be useful in another industrial technologies based on applications of single and two-phase flows.
Linear calculations of edge current driven kink modes with BOUT++ code
Energy Technology Data Exchange (ETDEWEB)
Li, G. Q., E-mail: ligq@ipp.ac.cn; Xia, T. Y. [Institute of Plasma Physics, CAS, Hefei, Anhui 230031 (China); Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Xu, X. Q. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Snyder, P. B.; Turnbull, A. D. [General Atomics, San Diego, California 92186 (United States); Ma, C. H.; Xi, P. W. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); FSC, School of Physics, Peking University, Beijing 100871 (China)
2014-10-15
This work extends previous BOUT++ work to systematically study the impact of edge current density on edge localized modes, and to benchmark with the GATO and ELITE codes. Using the CORSICA code, a set of equilibria was generated with different edge current densities by keeping total current and pressure profile fixed. Based on these equilibria, the effects of the edge current density on the MHD instabilities were studied with the 3-field BOUT++ code. For the linear calculations, with increasing edge current density, the dominant modes are changed from intermediate-n and high-n ballooning modes to low-n kink modes, and the linear growth rate becomes smaller. The edge current provides stabilizing effects on ballooning modes due to the increase of local shear at the outer mid-plane with the edge current. For edge kink modes, however, the edge current does not always provide a destabilizing effect; with increasing edge current, the linear growth rate first increases, and then decreases. In benchmark calculations for BOUT++ against the linear results with the GATO and ELITE codes, the vacuum model has important effects on the edge kink mode calculations. By setting a realistic density profile and Spitzer resistivity profile in the vacuum region, the resistivity was found to have a destabilizing effect on both the kink mode and on the ballooning mode. With diamagnetic effects included, the intermediate-n and high-n ballooning modes can be totally stabilized for finite edge current density.
Linear calculations of edge current driven kink modes with BOUT++ code
Li, G. Q.; Xu, X. Q.; Snyder, P. B.; Turnbull, A. D.; Xia, T. Y.; Ma, C. H.; Xi, P. W.
2014-10-01
This work extends previous BOUT++ work to systematically study the impact of edge current density on edge localized modes, and to benchmark with the GATO and ELITE codes. Using the CORSICA code, a set of equilibria was generated with different edge current densities by keeping total current and pressure profile fixed. Based on these equilibria, the effects of the edge current density on the MHD instabilities were studied with the 3-field BOUT++ code. For the linear calculations, with increasing edge current density, the dominant modes are changed from intermediate-n and high-n ballooning modes to low-n kink modes, and the linear growth rate becomes smaller. The edge current provides stabilizing effects on ballooning modes due to the increase of local shear at the outer mid-plane with the edge current. For edge kink modes, however, the edge current does not always provide a destabilizing effect; with increasing edge current, the linear growth rate first increases, and then decreases. In benchmark calculations for BOUT++ against the linear results with the GATO and ELITE codes, the vacuum model has important effects on the edge kink mode calculations. By setting a realistic density profile and Spitzer resistivity profile in the vacuum region, the resistivity was found to have a destabilizing effect on both the kink mode and on the ballooning mode. With diamagnetic effects included, the intermediate-n and high-n ballooning modes can be totally stabilized for finite edge current density.
Naito, Koki; Asami, Takuya; Miura, Hikaru
2015-07-01
Intense aerial acoustic waves can be produced by an ultrasonic source consisting of a transverse vibrating plate and an external jutting driving point. Previously, we studied the dimensional parameters of vibrating plates to produce stripe-mode patterns and thereby determine the plate dimensions that generate high-quality patterns. In this research, we use four transverse vibrating plates as ultrasonic sources to produce intense standing wave fields in air. As a result, an aerial standing wave field was formed in the field surrounded by four vibrating plates. Furthermore, for a total input power of 30 W for the two ultrasonic sources, a very strong (sound pressure level, 167 dB) wave field is obtained.
High-accuracy calculations of the rotation-vibration spectrum of {{\\rm{H}}}_{3}^{+}
Tennyson, Jonathan; Polyansky, Oleg L.; Zobov, Nikolai F.; Alijah, Alexander; Császár, Attila G.
2017-12-01
Calculation of the rotation-vibration spectrum of {{{H}}}3+, as well as of its deuterated isotopologues, with near-spectroscopic accuracy requires the development of sophisticated theoretical models, methods, and codes. The present paper reviews the state-of-the-art in these fields. Computation of rovibrational states on a given potential energy surface (PES) has now become standard for triatomic molecules, at least up to intermediate energies, due to developments achieved by the present authors and others. However, highly accurate Born–Oppenheimer energies leading to highly accurate PESs are not accessible even for this two-electron system using conventional electronic structure procedures (e.g. configuration-interaction or coupled-cluster techniques with extrapolation to the complete (atom-centered Gaussian) basis set limit). For this purpose, highly specialized techniques must be used, e.g. those employing explicitly correlated Gaussians and nonlinear parameter optimizations. It has also become evident that a very dense grid of ab initio points is required to obtain reliable representations of the computed points extending from the minimum to the asymptotic limits. Furthermore, adiabatic, relativistic, and quantum electrodynamic correction terms need to be considered to achieve near-spectroscopic accuracy during calculation of the rotation-vibration spectrum of {{{H}}}3+. The remaining and most intractable problem is then the treatment of the effects of non-adiabatic coupling on the rovibrational energies, which, in the worst cases, may lead to corrections on the order of several cm‑1. A promising way of handling this difficulty is the further development of effective, motion- or even coordinate-dependent, masses and mass surfaces. Finally, the unresolved challenge of how to describe and elucidate the experimental pre-dissociation spectra of {{{H}}}3+ and its isotopologues is discussed.
Dijkstra, Arend G.; Jansen, Thomas la Cour; Knoester, Jasper
2011-01-01
The amide vibrational modes play an important role in energy transport and relaxation in polypeptides and proteins and provide us with spectral markers for structure and structural dynamics of these macromolecules. Here, we present a detailed model to describe the dynamic properties of the amide I
Stretching dependence of the vibration modes of a single-molecule Pt-H-2-Pt bridge
DEFF Research Database (Denmark)
Djukic, D.; Thygesen, Kristian Sommer; Untiedt, C.
2005-01-01
A conducting bridge of a single hydrogen molecule between Pt electrodes is formed in a break junction experiment. It has a conductance near the quantum unit, G(0)=2e(2)/h, carried by a single channel. Using point-contact spectroscopy three vibration modes are observed and their variation upon...
VCD Robustness of the Amide-I and Amide-II Vibrational Modes of Small Peptide Models.
Góbi, Sándor; Magyarfalvi, Gábor; Tarczay, György
2015-09-01
The rotational strengths and the robustness values of amide-I and amide-II vibrational modes of For(AA)n NHMe (where AA is Val, Asn, Asp, or Cys, n = 1-5 for Val and Asn; n = 1 for Asp and Cys) model peptides with α-helix and β-sheet backbone conformations were computed by density functional methods. The robustness results verify empirical rules drawn from experiments and from computed rotational strengths linking amide-I and amide-II patterns in the vibrational circular dichroism (VCD) spectra of peptides with their backbone structures. For peptides with at least three residues (n ≥ 3) these characteristic patterns from coupled amide vibrational modes have robust signatures. For shorter peptide models many vibrational modes are nonrobust, and the robust modes can be dependent on the residues or on their side chain conformations in addition to backbone conformations. These robust VCD bands, however, provide information for the detailed structural analysis of these smaller systems. © 2015 Wiley Periodicals, Inc.
Hsieh, Chih-Chun; Wang, Peng-Shuen; Wang, Jia-Siang; Wu, Weite
2014-01-01
Simultaneous vibration welding of 304 stainless steel was carried out with an eccentric circulating vibrator and a magnetic telescopic vibrator at subresonant (362 Hz and 59.3 Hz) and resonant (376 Hz and 60.9 Hz) frequencies. The experimental results indicate that the temperature gradient can be increased, accelerating nucleation and causing grain refinement during this process. During simultaneous vibration welding primary δ -ferrite can be refined and the morphologies of retained δ-ferrite become discontinuous so that δ-ferrite contents decrease. The smallest content of δ-ferrite (5.5%) occurred using the eccentric circulating vibrator. The diffraction intensities decreased and the FWHM widened with both vibration and no vibration. A residual stress can obviously be increased, producing an excellent effect on stress relief at a resonant frequency. The stress relief effect with an eccentric circulating vibrator was better than that obtained using a magnetic telescopic vibrator.
DEFF Research Database (Denmark)
Thomsen, Bo; Hansen, Mikkel Bo; Seidler, Peter
2012-01-01
We report the theory and implementation of vibrational coupled cluster (VCC) damped response functions. From the imaginary part of the damped VCC response function the absorption as function of frequency can be obtained, requiring formally the solution of the now complex VCC response equations. T...
Shin, Hee Won; Ocola, Esther J; Kim, Sunghwan; Laane, Jaan
2014-01-21
The fluorescence excitation spectra of jet-cooled benzocyclobutane have been recorded and together with its ultraviolet absorption spectra have been used to assign the vibrational frequencies for this molecule in its S1(π,π(*)) electronic excited state. Theoretical calculations at the CASSCF(6,6)/aug-cc-pVTZ level of theory were carried out to compute the structure of the molecule in its excited state. The calculated structure was compared to that of the molecule in its electronic ground state as well as to the structures of related molecules in their S0 and S1(π,π(*)) electronic states. In each case the decreased π bonding in the electronic excited states results in longer carbon-carbon bonds in the benzene ring. The skeletal vibrational frequencies in the electronic excited state were readily assigned and these were compared to the ground state and to the frequencies of five similar molecules. The vibrational levels in both S0 and S1(π,π(*)) states were remarkably harmonic in contrast to the other bicyclic molecules. The decreases in the frequencies of the out-of-plane skeletal modes reflect the increased floppiness of these bicyclic molecules in their S1(π,π(*)) excited state.
Energy Technology Data Exchange (ETDEWEB)
Shin, Hee Won; Ocola, Esther J.; Laane, Jaan, E-mail: laane@mail.chem.tamu.edu [Department of Chemistry, Texas A and M University, College Station, Texas 77843-3255 (United States); Kim, Sunghwan [National Center for Biotechnology Information, National Library of Medicine, National Institutes of Health, Department of Health and Human Services, 8600 Rockville Pike, Bethesda, Maryland 20894 (United States)
2014-01-21
The fluorescence excitation spectra of jet-cooled benzocyclobutane have been recorded and together with its ultraviolet absorption spectra have been used to assign the vibrational frequencies for this molecule in its S{sub 1}(π,π{sup *}) electronic excited state. Theoretical calculations at the CASSCF(6,6)/aug-cc-pVTZ level of theory were carried out to compute the structure of the molecule in its excited state. The calculated structure was compared to that of the molecule in its electronic ground state as well as to the structures of related molecules in their S{sub 0} and S{sub 1}(π,π{sup *}) electronic states. In each case the decreased π bonding in the electronic excited states results in longer carbon-carbon bonds in the benzene ring. The skeletal vibrational frequencies in the electronic excited state were readily assigned and these were compared to the ground state and to the frequencies of five similar molecules. The vibrational levels in both S{sub 0} and S{sub 1}(π,π{sup *}) states were remarkably harmonic in contrast to the other bicyclic molecules. The decreases in the frequencies of the out-of-plane skeletal modes reflect the increased floppiness of these bicyclic molecules in their S{sub 1}(π,π{sup *}) excited state.
Shin, Hee Won; Ocola, Esther J.; Kim, Sunghwan; Laane, Jaan
2014-01-01
The fluorescence excitation spectra of jet-cooled benzocyclobutane have been recorded and together with its ultraviolet absorption spectra have been used to assign the vibrational frequencies for this molecule in its S1(π,π*) electronic excited state. Theoretical calculations at the CASSCF(6,6)/aug-cc-pVTZ level of theory were carried out to compute the structure of the molecule in its excited state. The calculated structure was compared to that of the molecule in its electronic ground state as well as to the structures of related molecules in their S0 and S1(π,π*) electronic states. In each case the decreased π bonding in the electronic excited states results in longer carbon-carbon bonds in the benzene ring. The skeletal vibrational frequencies in the electronic excited state were readily assigned and these were compared to the ground state and to the frequencies of five similar molecules. The vibrational levels in both S0 and S1(π,π*) states were remarkably harmonic in contrast to the other bicyclic molecules. The decreases in the frequencies of the out-of-plane skeletal modes reflect the increased floppiness of these bicyclic molecules in their S1(π,π*) excited state. PMID:25669377
Shin, Hee Won; Ocola, Esther J.; Kim, Sunghwan; Laane, Jaan
2014-01-01
The fluorescence excitation spectra of jet-cooled benzocyclobutane have been recorded and together with its ultraviolet absorption spectra have been used to assign the vibrational frequencies for this molecule in its S1(π,π*) electronic excited state. Theoretical calculations at the CASSCF(6,6)/aug-cc-pVTZ level of theory were carried out to compute the structure of the molecule in its excited state. The calculated structure was compared to that of the molecule in its electronic ground state as well as to the structures of related molecules in their S0 and S1(π,π*) electronic states. In each case the decreased π bonding in the electronic excited states results in longer carbon-carbon bonds in the benzene ring. The skeletal vibrational frequencies in the electronic excited state were readily assigned and these were compared to the ground state and to the frequencies of five similar molecules. The vibrational levels in both S0 and S1(π,π*) states were remarkably harmonic in contrast to the other bicyclic molecules. The decreases in the frequencies of the out-of-plane skeletal modes reflect the increased floppiness of these bicyclic molecules in their S1(π,π*) excited state.
Geldof, D.; Tassi, M.; Carleer, R.; Adriaensens, P.; Roevens, A.; Meynen, V.; Blockhuys, F.
2017-01-01
A DFT study on the adsorption of a series of phosphonic acids (PAs) on the TiO2 anatase (101) and (001) surfaces was performed. The adsorption energies and geometries of the most stable binding modes were compared to literature data and the effect of the inclusion of dispersion forces in the energy calculations was gauged. As the (101) surface is the most exposed surface of TiO2 anatase, the calculated chemical shifts and vibrational frequencies of PAs adsorbed on this surface were compared to experimental 31P and 17O NMR and IR data in order to assign the two possible binding modes (mono- and bidentate) to peaks and bands in these spectra; due to the corrugated nature of anatase (101) tridentate binding is not possible on this surface. Analysis of the calculated and experimental 31P chemical shifts indicates that both monodentate and bidentate binding modes are present. For the reactive (001) surface, the results of the calculations indicate that both bi- and tridentate binding modes result in stable systems. Due to the particular sensitivity of 17O chemical shifts to hydrogen bonding and solvent effects, the model used is insufficient to assign these spectra at present. Comparison of calculated and experimental IR spectra leads to the conclusion that IR spectroscopy is not suitable for the characterization of the different binding modes of the adsorption complexes.
Roundtrip matrix method for calculating the leaky resonant modes of open nanophotonic structures
DEFF Research Database (Denmark)
de Lasson, Jakob Rosenkrantz; Kristensen, Philip Trøst; Mørk, Jesper
2014-01-01
We present a numerical method for calculating quasi-normal modes of open nanophotonic structures. The method is based on scattering matrices and a unity eigenvalue of the roundtrip matrix of an internal cavity, and we develop it in detail with electromagnetic fields expanded on Bloch modes...... of periodic structures. This procedure is simpler to implement numerically and more intuitive than previous scattering matrix methods, and any routine based on scattering matrices can benefit from the method. We demonstrate the calculation of quasi-normal modes for two-dimensional photonic crystals where...
Vibrational Surface Electron-Energy-Loss Spectroscopy Probes Confined Surface-Phonon Modes
Directory of Open Access Journals (Sweden)
Hugo Lourenço-Martins
2017-12-01
Full Text Available Recently, two reports [Krivanek et al. Nature (London 514, 209 (2014NATUAS0028-083610.1038/nature13870, Lagos et al. Nature (London 543, 529 (2017NATUAS0028-083610.1038/nature21699] have demonstrated the amazing possibility to probe vibrational excitations from nanoparticles with a spatial resolution much smaller than the corresponding free-space phonon wavelength using electron-energy-loss spectroscopy (EELS. While Lagos et al. evidenced a strong spatial and spectral modulation of the EELS signal over a nanoparticle, Krivanek et al. did not. Here, we show that discrepancies among different EELS experiments as well as their relation to optical near- and far-field optical experiments [Dai et al. Science 343, 1125 (2014SCIEAS0036-807510.1126/science.1246833] can be understood by introducing the concept of confined bright and dark surface phonon modes, whose density of states is probed by EELS. Such a concise formalism is the vibrational counterpart of the broadly used formalism for localized surface plasmons [Ouyang and Isaacson Philos. Mag. B 60, 481 (1989PMABDJ1364-281210.1080/13642818908205921, García de Abajo and Aizpurua Phys. Rev. B 56, 15873 (1997PRBMDO0163-182910.1103/PhysRevB.56.15873, García de Abajo and Kociak Phys. Rev. Lett. 100, 106804 (2008PRLTAO0031-900710.1103/PhysRevLett.100.106804, Boudarham and Kociak Phys. Rev. B 85, 245447 (2012PRBMDO1098-012110.1103/PhysRevB.85.245447]; it makes it straightforward to predict or interpret phenomena already known for localized surface plasmons such as environment-related energy shifts or the possibility of 3D mapping of the related surface charge densities [Collins et al. ACS Photonics 2, 1628 (2015APCHD52330-402210.1021/acsphotonics.5b00421].
Arivazhagan, M.; Jeyavijayan, S.; Geethapriya, J.
2013-03-01
The FTIR and FT-Raman spectra of 5-nitro-2-furaldehyde oxime (NFAO) have been recorded in the regions 4000-400 cm-1 and 3500-50 cm-1, respectively. The total energies of different conformations have been obtained from DFT (B3LYP) with 6-311++G(d,p) basis set calculations. The computational results identify the most stable conformer of NFAO as the C1 form. Utilizing the observed FTIR and FT-Raman data, a complete vibrational assignment and analysis of the fundamental modes of the compound were carried out. The optimum molecular geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities, were calculated by density functional theory (DFT/B3LYP) method with 6-31+G(d,p) and 6-311++G(d,p) basis sets. The difference between the observed and scaled wavenumber values of most of the fundamentals is very small. A detailed interpretation of the infrared and Raman spectra of NFAO is also reported based on total energy distribution (TED). Stability of the molecule arising from hyperconjugative interactions, charge delocalization have been analyzed using natural bond orbital (NBO) analysis. Besides, molecular electrostatic potential (MEP), HOMO and LUMO analysis, and several thermodynamic properties were performed by the DFT method. Mulliken's net charges have been calculated and compared with the natural atomic charges. Ultraviolet-visible spectrum of the title molecule has also been calculated using TD-DFT method.
Anitha, R; Gunasekaran, M; Kumar, S Suresh; Athimoolam, S; Sridhar, B
2015-01-01
The common house hold pharmaceutical drug, paracetamol (PAR), has been synthesized from 4-chloroaniline as a first ever report. After the synthesis, good quality single crystals were obtained for slow evaporation technique under the room temperature. The crystal and molecular structures were re-determined by the single crystal X-ray diffraction. The vibrational spectral measurements were carried out using FT-IR and FT-Raman spectroscopy in the range of 4000-400 cm(-1). The single crystal X-ray studies shows that the drug crystallized in the monoclinic system polymorph (Form-I). The crystal packing is dominated by N-H⋯O and O-H⋯O classical hydrogen bonds. The ac diagonal of the unit cell features two chain C(7) and C(9) motifs running in the opposite directions. These two chain motifs are cross-linked to each other to form a ring R4(4)(22) motif and a chain C2(2)(6) motif which is running along the a-axis of the unit cell. Along with the classical hydrogen bonds, the methyl group forms a weak C-H⋯O interactions in the crystal packing. It offers the support for molecular assembly especially in the hydrophilic regions. Further, the strength of the hydrogen bonds are studied the shifting of vibrational bands. Geometrical optimizations of the drug molecule were done by the Density Functional Theory (DFT) using the B3LYP function and Hartree-Fock (HF) level with 6-311++G(d,p) basis set. The optimized molecular geometry and computed vibrational spectra are compared with experimental results which show significant agreement. The factor group analysis of the molecule was carried out by the various molecular symmetry, site and factor group species using the standard correlation method. The Natural Bond Orbital (NBO) analysis was carried out to interpret hyperconjugative interaction and intramolecular charge transfer (ICT). The chemical softness, chemical hardness, electro-negativity, chemical potential and electrophilicity index of the molecule were found out first
Durig, James R.; Guirgis, Gamil A.; Jin, Yanping
1996-06-01
The Raman (3500-10 cm -1) and infrared (3200-50 cm -1 spectra have been recorded of the fluid and solid phases of but-2-enoyl fluoride (crotonyl fluoride) trans-CH 3CHCHCFO, where the methyl group is trans to the CFO group. From the variable temperature studies of the infrared spectrum of the sample dissolved in liquified Xe, the conformer pair at {836}/{827}cm-1 has been used to determine a ΔH value of 135 ± 11 cm -1 (387 ± 30 cal mol -1), with the s-cis ( syn) form (two double bonds oriented cis to one another) the more stable form. In the Raman and infrared spectra of the solid, the s-cis conformer seems predominant, but even with repeated annealing a spectrum free of signals from the s-trans ( anti) conformer could not be obtained. In fact, in some of the infrared spectra, there appeared to be a slight preference for the trans conformer. The asymmetric torsional fundamental of the s-trans conformer was observed at 104.3 cm -1 with two hot bands and that for the s-cis rotamer at 97.0 cm -1 with one hot band. From these data the potential function governing the conformational interchange was determined, and the potential coefficients are: V1 = -122 ± 1, V2 = 1993 ± 27, V3 = 21 ± 1 and V4 = -88 ± 8 cm -1. The s-trans to s-cis and s-cis to s-trans barriers were determined to be 2044 and 1942 cm -1, respectively, with an enthalpy difference between the conformers of 102 ± 29 cm -1(292 ± 83 cal mol -1). The barriers governing the internal rotation of the CH 3 group for the s-trans and s-cis conformers are calculated to be 1060 ± 17 cm -1 (3.03 ± 0.05 kcal mol -1) and 1042 ± 23 cm -1 (2.98 ± 0.07 kcal mol -1), respectively. A complete vibrational assignment of the normal modes is provided. The structural parameters, force constants, and vibrational frequencies have been determined from ab initio {RHF}/{3-21 G}, {RHF}/{6-31 G∗ } and {MP2 }/{6-31 G∗ } calculations, and the theoretical results are compared with the experimental values when appropriate
Mei, Chuh
1987-01-01
A finite element method is presented for the large amplitude vibrations of complex structures that can be modelled with beam and rectangular plate elements subjected to harmonic excitation. Both inplane deformation and inertia are considered in the formulation. Derivation of the harmonic force and nonlinear stiffness matrices for a beam and a rectangular plate element are presented. Solution procedures and convergence characteristics of the finite element method are described. Nonlinear response to uniform and concentrated harmonic loadings and improved nonlinear free vibration results are presented for beams and rectangular plates of various boundary conditions.
Dance, Ian
2011-06-28
The intramolecular hydrogenation paradigm for the reducing actions of the enzyme nitrogenase postulates that the iron-molybdenum cofactor (FeMo-co, Fe(7)MoS(9)N(homocitrate)) as active site contains H atoms bound to Fe and S during the catalytic cycle, and that these H atoms are the reducing agents. The reduction of N(2) and of all other non-physiological substrates is strongly inhibited by carbon monoxide, except for the formation of H(2) from protons. It has been recently reported that vanadium nitrogenase and modified molybdenum nitrogenase reduce CO to hydrocarbons. Therefore many questions now arise about relationships between CO and H on the nitrogenase cofactors. In order to assist the interpretation of kinetic infrared spectral data, vibrational frequencies and modes have been calculated for a variety of possible structures in which FeMo-co bears H atoms, or CO ligands, or both. Fe-H stretching frequencies occur in the same spectral window as the C-O stretching frequencies, with lesser intensity, and both stretches are strongly coupled in some structures. Symmetrical bridging of CO between two Fe atoms of FeMo-co is destabilised by the presence of other ligands on Fe, and the reason for this is evident. Two results for bound formyl, HCO, are reported. These calculations of reference structures allow some interpretation of existing experimental spectra, but, more significantly, they suggest further kinetic infrared experiments to elucidate the chemical mechanism of catalysis by nitrogenase under normal turnover conditions. This journal is © The Royal Society of Chemistry 2011
Zhang, Yong; Straub, John E
2009-06-07
The time scales and pathways of vibrational energy relaxation (VER) of the nu(4) and nu(7) modes of three nickel porphyrin models, nickel porphine (NiP), nickel protoporphyrin IX (Ni-heme), and nickel octaethylporphyrin (NiOEP), were studied using a non-Markovian time-dependent perturbation theory at the B3LYP/6-31G(d) level. When NiP is calculated with D(4h) symmetry, it has the planar structure and the same VER properties as ferrous iron porphine (FeP). The porphine cores of both Ni-heme and NiOEP were distorted from a planar geometry, assuming a nonplanar structure, similar to that of the heme structure in cytochrome c. The VER time scales of Ni-heme are found to be similar to those predicted for a planar iron heme, but the derived pathways have distinctly different features. In particular, the strong coupling between the nu(7) mode and the overtone of the approximately 350 cm(-1) gamma(7) mode, observed for planar porphyrins, is absent in both nonplanar nickel porphyrins. Direct energy exchange between the nu(4) and nu(7) modes is not observed in NiOEP, but is found to play an essential role in the VER of the nu(4) mode in Ni-heme. The Ni-heme isopropionate groups are involved in the dominant VER pathways of both the nu(4) and nu(7) modes of Ni-heme. However, in contrast with VER pathways derived in planar iron heme, the isopropionate groups are not observed to play an essential role relative to other side chains in spatially directing the vibrational energy flow.
USE OF WHOLE-BODY VIBRATION AS A MODE OF WARMING UP BEFORE COUNTER MOVEMENT JUMP
Directory of Open Access Journals (Sweden)
Enrique G. Artero
2007-12-01
Full Text Available Whole-body vibration (WBV has been suggested to be particularly effective on the stretch-shortening cycle-based movements, such as the counter movement jump (CMJ test (Issurin, 2005. Nevertheless, the literature on short-term vibration exposure and lower limb explosive performance (measured by CMJ test is contradictory. Either transient improvements (Bosco et al., 2000; Cochrane and Stannard, 2005; Torvinen et al., 2002a or no effects (Torvinen et al., 2002b; Rittweger et al., 2003; Cormie et al., 2006 have been reported after a single WBV exposure ranging from 30 s to 10 min. The present study aimed at better characterizing the use of a single short bout of WBV as a mode of warming up before a CMJ test.A total of 114 university students (37 men, 77 women, aged 19.6 ± 2.0 years signed an informed consent form and volunteered to participate in the study. The study protocol was approved by the Review Committee for Research Involving Human Subjects of our center. Participants were asked to come to the laboratory in three occasions three days apart. First visit: familiarization session aiming to learn the CMJ technique and to experience the vibration stimulus. Second visit: the participants performed three consecutive CMJ with one min rest interval. No significant differences were observed among the jumps, and the highest score was retained. Third visit: the participants were exposed to a single short bout of WBV and immediately after they performed three CMJ with one min rest interval.An infrared contact timing platform (ERGO JUMP Plus - BOSCO SYSTEM, Byomedic, S.C.P., Barcelona, Spain was used to measure "flight" time (t during the vertical jump (accuracy 0.001 s. Maximum height achieved by the body centre of gravity (h was then estimated, i.e. h = g · t2 / 8, where g = 9.81 m/s2. In all occasions, the participants were instructed to abstain from strenuous exercise for the preceding 24 hours.Whole-body vibration was carried out on an oscillating
Fedorov, Dmitry A; Barnes, Dustin K; Varganov, Sergey A
2017-09-28
We investigate the lifetimes of vibrational states of diatomic alkali-alkaline-earth cations to determine their suitability for ultracold experiments where long decoherence time and controllability by an external electric field are desirable. The potential energy and permanent dipole moment curves for the ground electronic states of LiBe + , LiMg + , NaBe + , and NaMg + are obtained using the coupled cluster with singles doubles and triples and multireference configuration interaction methods in combination with large all-electron cc-pCVQZ and aug-cc-pCV5Z basis sets. The energies and wave functions of all vibrational states are obtained by solving the Schrödinger equation for nuclei with the B-spline basis set method. To predict the lifetimes of vibrational states, the transition dipole moments, as well as the Einstein coefficients describing spontaneous emission, and the stimulated absorption and emission induced by black body radiation are calculated. Surprisingly, in all studied ions, the lifetimes of the highest excited vibrational states are similar to the lifetimes of the ground vibrational states indicating that highly vibrationally excited ions could be useful for the ultracold experiments requiring long decoherence time.
Fedorov, Dmitry A.; Barnes, Dustin K.; Varganov, Sergey A.
2017-09-01
We investigate the lifetimes of vibrational states of diatomic alkali-alkaline-earth cations to determine their suitability for ultracold experiments where long decoherence time and controllability by an external electric field are desirable. The potential energy and permanent dipole moment curves for the ground electronic states of LiBe+, LiMg+, NaBe+, and NaMg+ are obtained using the coupled cluster with singles doubles and triples and multireference configuration interaction methods in combination with large all-electron cc-pCVQZ and aug-cc-pCV5Z basis sets. The energies and wave functions of all vibrational states are obtained by solving the Schrödinger equation for nuclei with the B-spline basis set method. To predict the lifetimes of vibrational states, the transition dipole moments, as well as the Einstein coefficients describing spontaneous emission, and the stimulated absorption and emission induced by black body radiation are calculated. Surprisingly, in all studied ions, the lifetimes of the highest excited vibrational states are similar to the lifetimes of the ground vibrational states indicating that highly vibrationally excited ions could be useful for the ultracold experiments requiring long decoherence time.
Bastida, Adolfo; Soler, Miguel A; Zúñiga, José; Requena, Alberto; Kalstein, Adrián; Fernández-Alberti, Sebastian
2010-11-04
Nonequilibrium molecular dynamics (MD) simulations and instantaneous normal mode (INMs) analyses are used to study the vibrational relaxation of the C-H stretching modes (ν(s)(CH₃)) of deuterated N-methylacetamide (NMAD) in aqueous (D2O) solution. The INMs are identified unequivocally in terms of the equilibrium normal modes (ENMs), or groups of them, using a restricted version of the recently proposed Min-Cost assignment method. After excitation of the parent ν(s)(CH₃) modes with one vibrational quantum, the vibrational energy is shown to dissipate through both intramolecular vibrational redistribution (IVR) and intermolecular vibrational energy transfer (VET). The decay of the vibrational energy of the ν(s)(CH₃) modes is well fitted to a triple exponential function, with each characterizing a well-defined stage of the entire relaxation process. The first, and major, relaxation stage corresponds to a coherent ultrashort (τ(rel) = 0.07 ps) energy transfer from the parent ν(s)(CH₃) modes to the methyl bending modes δ(CH₃), so that the initially excited state rapidly evolves into a mixed stretch-bend state. In the second stage, characterized by a time of 0.92 ps, the vibrational energy flows through IVR to a number of mid-range-energy vibrations of the solute. In the third stage, the vibrational energy accumulated in the excited modes dissipates into the bath through an indirect VET process mediated by lower-energy modes, on a time scale of 10.6 ps. All the specific relaxation channels participating in the whole relaxation process are properly identified. The results from the simulations are finally compared with the recent experimental measurements of the ν(s)(CH₃) vibrational energy relaxation in NMAD/D₂O(l) reported by Dlott et al. (J. Phys. Chem. A 2009, 113, 75.) using ultrafast infrared-Raman spectroscopy.
Botella, V.; Timon, V.; Escamilla-Roa, E.; Hernández-Languna, A.; Sainz-Díaz, C. I.
2004-10-01
The hydroxy groups of the crystal lattice of dioctahedral 2:1 phyllosilicates were investigated by means of quantum-mechanical calculation. The standard Kohn-Sham self-consistent density functional theory (DFT) method was applied using the generalized gradient approximation (GGA) with numerical atomic orbitals and double-zeta polarized functions as basis set. Isomorphous cation substitution of different cations in the octahedral and tetrahedral sheet was included along with several interlayer cations reproducing experimental crystal lattice parameters. The effect of these substitutions and the interlayer charge on the hydroxyl group properties was also studied. These structures represent different cation pairs among Al3+, Fe3+ and Mg2+ in the octahedral sheet of clays joined to OH groups. The geometrical disposition of the OH bond in the crystal lattice and the hydrogen bonds and other electrostatic interactions of this group were analyzed. The frequencies of different vibrational modes of the OH group [ν(OH), δ(OH) and γ(OH)] were calculated and compared with experimental data, finding a good agreement. These frequencies depend significantly on the nature of cations which are joined with, and the electrostatic interactions with, the interlayer cations. Besides, hydrogen-bonding interactions with tetrahedral oxygens are important for the vibrational properties of the OH groups; however, also the electrostatic interactions of these OH groups with the rest of tetrahedral oxygens within the tetrahedral cavity should be taken into account. The cation substitution effect on the vibration modes of the OH groups was analyzed reproducing the experimental behaviour.
Petrenko, Taras; Rauhut, Guntram
2017-03-28
Vibrational configuration interaction theory is a common method for calculating vibrational levels and associated IR and Raman spectra of small and medium-sized molecules. When combined with appropriate configuration selection procedures, the method allows the treatment of configuration spaces with up to 1010 configurations. In general, this approach pursues the construction of the eigenstates with significant contributions of physically relevant configurations. The corresponding eigenfunctions are evaluated in the subspace of selected configurations. However, it can easily reach the dimension which is not tractable for conventional eigenvalue solvers. Although Davidson and Lanczos methods are the methods of choice for calculating exterior eigenvalues, they usually fall into stagnation when applied to interior states. The latter are commonly treated by the Jacobi-Davidson method. This approach in conjunction with matrix factorization for solving the correction equation (CE) is prohibitive for larger problems, and it has limited efficiency if the solution of the CE is based on Krylov's subspace algorithms. We propose an iterative subspace method that targets the eigenvectors with significant contributions to a given reference vector and is based on the optimality condition for the residual norm corresponding to the error in the solution vector. The subspace extraction and expansion are modified according to these principles which allow very efficient calculation of interior vibrational states with a strong multireference character in different vibrational structure problems. The convergence behavior of the method and its performance in comparison with the aforementioned algorithms are investigated in a set of benchmark calculations.
Petrenko, Taras; Rauhut, Guntram
2017-03-01
Vibrational configuration interaction theory is a common method for calculating vibrational levels and associated IR and Raman spectra of small and medium-sized molecules. When combined with appropriate configuration selection procedures, the method allows the treatment of configuration spaces with up to 1010 configurations. In general, this approach pursues the construction of the eigenstates with significant contributions of physically relevant configurations. The corresponding eigenfunctions are evaluated in the subspace of selected configurations. However, it can easily reach the dimension which is not tractable for conventional eigenvalue solvers. Although Davidson and Lanczos methods are the methods of choice for calculating exterior eigenvalues, they usually fall into stagnation when applied to interior states. The latter are commonly treated by the Jacobi-Davidson method. This approach in conjunction with matrix factorization for solving the correction equation (CE) is prohibitive for larger problems, and it has limited efficiency if the solution of the CE is based on Krylov's subspace algorithms. We propose an iterative subspace method that targets the eigenvectors with significant contributions to a given reference vector and is based on the optimality condition for the residual norm corresponding to the error in the solution vector. The subspace extraction and expansion are modified according to these principles which allow very efficient calculation of interior vibrational states with a strong multireference character in different vibrational structure problems. The convergence behavior of the method and its performance in comparison with the aforementioned algorithms are investigated in a set of benchmark calculations.
Energy Technology Data Exchange (ETDEWEB)
Londos, C. A.; Antonaras, G. [University of Athens, Solid State Physics Section, Panepistimiopolis Zografos, Athens 157 84 (Greece); Chroneos, A. [Materials Engineering, The Open University, Milton Keynes MK7 6AA (United Kingdom); Department of Materials, Imperial College, London SW7 2AZ (United Kingdom)
2013-07-28
The evolution of self-interstitial clusters in silicon (Si), produced by fast neutron irradiation of silicon crystals followed by anneals up to 750 °C, is investigated using localised vibrational mode spectroscopy. A band at 582 cm{sup −1} appears after irradiation and is stable up to 550 °C was attributed to small self-interstitial clusters (I{sub n}, n ≤ 4), with the most probable candidate the I{sub 4} structure. Two bands at 713 and 758 cm{sup −1} arising in the spectra upon annealing of the 582 cm{sup −1} band and surviving up to ∼750 °C were correlated with larger interstitial clusters (I{sub n}, 5 ≤ n ≤ 8), with the most probable candidate the I{sub 8} structure or/and with chainlike defects which are precursors of the (311) extended defects. The results illustrate the presence of different interstitial clusters I{sub n}, at the various temperature intervals of the material, in the course of an isochronal anneal sequence. As the annealing temperature increases, they evolve from first-order structures with a small number of self-interstitials (I{sub n}, n ≤ 4) for the temperatures 50 < T < 550 °C, to second order structures (I{sub n}, 5 ≤ n ≤ 8) with a larger number of interstitials, for the temperatures 550 < T < 750 °C.
On the correlation between phase-locking modes and Vibrational Resonance in a neuronal model
Morfu, S.; Bordet, M.
2018-02-01
We numerically and experimentally investigate the underlying mechanism leading to multiple resonances in the FitzHugh-Nagumo model driven by a bichromatic excitation. Using a FitzHugh-Nagumo circuit, we first analyze the number of spikes triggered by the system in response to a single sinusoidal wave forcing. We build an encoding diagram where different phase-locking modes are identified according to the amplitude and frequency of the sinusoidal excitation. Next, we consider the bichromatic driving which consists in a low frequency sinusoidal wave perturbed by an additive high frequency signal. Beside the classical Vibrational Resonance phenomenon, we show in real experiments that multiple resonances can be reached by an appropriate setting of the perturbation parameters. We clearly establish a correlation between these resonances and the encoding diagram of the low frequency signal free FitzHugh-Nagumo model. We show with realistic parameters that sharp transitions of the encoding diagram allow to predict the main resonances. Our experiments are confirmed by numerical simulations of the system response.
CALCULATION OF OPERATION MODE OF OUTDOOR LIGHTING LINE WITH BILATERAL SUPPLY. Part 1
Directory of Open Access Journals (Sweden)
V. B. Kozlovskaya
2016-01-01
Full Text Available The electrical outdoor lighting grids are formed with a regard for their functional purpose. The present article draws the attention to the specific features of operation mode of an outdoor lighting line with a bilateral supply. This mode of operation is characteristic for main streets and circular roads. The article presents the method of calculating of the mode of such kind and the calculation itself that has been fulfilled on behalf of the outdoor lighting line with a bilateral supply described in the article. Luminaries with high pressure sodium lamps connected through electromagnetic ballasts were used as sources of light. The accuracy of parameters under calculation depends on the completeness of the source data. The calculations were implemented with the use of a program realized in MathCad. For each line phase the following mode parameters were defined: voltage in the circuit points, power, current, power loss and voltage drop on all segments of the line. The calculated data can be used for various purposes. Power magnitudes were determined for two points of supply and one can determine the power consumption provided that the time of operation of electric lighting is known. Estimation of the efficiency the mode on the basis of ensuring the necessary level of voltage at the luminaires was implemented. Active and reactive power of a luminary is determined by the voltage at the terminals of the luminaires. Magnitudes of power of luminaires located at different distances from the power source differ from each other. The voltage value has a significant effect on the electricity consumption values and on operating characteristics of a light source. With the use of the abovementioned program a line of outdoor lighting with a bilateral supply of any configuration can be simulated and different operation modes of a grid, viz. evening, night, dimming and other modes can be calculated.
Chain, Fernando E.; Ladetto, María Florencia; Grau, Alfredo; Catalán, César A. N.; Brandán, Silvia Antonia
2016-02-01
In the present work, the structural, topological and vibrational properties of four members of the N-benzylamides series derived from Maca (Lepidium meyenii) whose names are, N-benzylpentadecanamide, N-benzylhexadecanamide, N-benzylheptadecanamide and N-benzyloctadecanamide, were studied combining the FTIR, FT-Raman and 1H and 13C-NMR spectroscopies with density functional theory (DFT) and ONION calculations. Furthermore, the N-benzylacetamide, N-benzylpropilamide and N-benzyl hexanamide derivatives were also studied in order to compare their properties with those computed for the four macamides. These seven N-benzylamides series have a common structure, C8H8NO-R, being R the side chain [-(CH2)n-CH3] with a variable n number of CH2 groups. Here, the atomic charges, molecular electrostatic potentials, stabilization energies, topological properties of those macamides were analyzed as a function of the number of C atoms of the side chain while the frontier orbitals were used to compute the gap energies and some descriptors in order to predict their reactivities and behaviors in function of the longitude of the side chain. Here, the force fields, the complete vibrational assignments and the corresponding force constants were only reported for N-benzylacetamide, N-benzyl hexanamide and N-benzylpentadecanamide due to the high number of vibration normal modes that present the remains macamides.
Analytical calculation of Hermite-Gauss and Laguerre-Gauss modes on a bullseye photodiode
Bond, Charlotte; Freise, Andreas
2016-01-01
This note describes the analytical derivation of the response of bullseye detectors to optical beats between higher-order spatial modes of the Laguerre-Gauss form, and subsequently the Hermite-Gauss form. Also included is a comparison with numerically calculated beat coefficients, and a simple example of the use of the resulting beat coefficients in simulating a mode mismatch sensor for a Fabry-Perot cavity.
Directory of Open Access Journals (Sweden)
Qiang Zhang
2015-01-01
Full Text Available An analytical model on electromechanical coupling coefficient and the length optimization of a bending piezoelectric ultrasonic transducer are proposed. The piezoelectric transducer consists of 8 PZT elements sandwiched between four thin electrodes, and the PZT elements are clamped by a screwed connection between fore beam and back beam. Firstly, bending vibration model of the piezoelectric transducer is built based on the Timoshenko beam theory. Secondly, the analytical model of effective electromechanical coupling coefficient is built based on the bending vibration model. Energy method and electromechanical equivalent circuit method are involved in the modelling process. To validate the analytical model, sandwich type piezoelectric transducer example in second order bending vibration mode is analysed. Effective electromechanical coupling coefficient of the transducer is optimized with simplex reflection technique, and the optimized ratio of length of the transducers is obtained. Finally, experimental prototypes of the sandwich type piezoelectric transducers are fabricated. Bending vibration mode and impedance of the experimental prototypes are tested, and electromechanical coupling coefficient is obtained according to the testing results. Results show that the analytical model is in good agreement with the experimental model.
Seçgin, Abdullah; Saide Sarıgül, A.
2009-03-01
This study introduces a novel scheme for the discrete high-frequency forced vibration analysis based on discrete singular convolution (DSC) and mode superposition (MS) approaches. The accuracy of the DSC-MS is validated for thin beams and plates by comparing with available analytical solutions. The performance of the DSC-MS is evaluated by predicting spatial distribution and discrete frequency spectra of the vibration response of thin plates with two different boundary conditions. The frequency spectra of the time-harmonic excitation forces are in the form of ideal and band-limited white noise so that the natural modes in the frequency band are provoked. The solution exposes high-frequency response behaviour definitely. Therefore, it is hoped with this paper to contribute the studies on the treatment of uncertainties in the high-frequency design applications.
Fry-Petit, A M; Rebola, A F; Mourigal, M; Valentine, M; Drichko, N; Sheckelton, J P; Fennie, C J; McQueen, T M
2015-09-28
For over a century, vibrational spectroscopy has enhanced the study of materials. Yet, assignment of particular molecular motions to vibrational excitations has relied on indirect methods. Here, we demonstrate that applying group theoretical methods to the dynamic pair distribution function analysis of neutron scattering data provides direct access to the individual atomic displacements responsible for these excitations. Applied to the molecule-based frustrated magnet with a potential magnetic valence-bond state, LiZn2Mo3O8, this approach allows direct assignment of the constrained rotational mode of Mo3O13 clusters and internal modes of MoO6 polyhedra. We anticipate that coupling this well known data analysis technique with dynamic pair distribution function analysis will have broad application in connecting structural dynamics to physical properties in a wide range of molecular and solid state systems.
Wang, Yu; Smolarek, Szymon; Kong, Xianggui; Buma, Wybren Jan; Brouwer, Albert Manfred; Zhang, Hong
2010-11-01
Physical and chemical properties of nanoparticles are known to be subject to the surface factors. For their biological/biomedical applications, typically, surface of the nanoparticles has to be modified which inevitably affects their performance. In this work we have studied the interaction between the surface related organic vibrational modes and the luminescent centers--rare earth ions--in one of the most efficient luminescence upconversion nanosystems--NaYF4. Specifically, the surface quenching centers, the surface related luminescent centers, as well as the role of shell properties, are investigated spectroscopically. Our results demonstrate that the surface related high-frequency vibrational modes can be critical to the spectral properties of the nanosystems once the surface is not well separated from the discrete luminescent centers.
Nordenfelt, Anders
2011-01-01
We demonstrate theoretically the feasibility of selective self-excitation of higher-mode flexural vibrations of graphene nano-ribbons and carbon nanotubes by the means of magnetomotive instability. Apart from the mechanical resonator, the device consists only of a constant voltage source, an inductor, a capacitor, a gate electrode and a constant magnetic field. Numerical simluations were performed on both graphene and carbon nanotubes displaying an overall similar behaviour, but with some dif...
Abstract: Stoichiometry, Vibrational Modes and Structures of Molten Nb2O5-K2S2O7 Mixtures
DEFF Research Database (Denmark)
Boghosian, S.; Borup, F.; Berg, Rolf W.
1998-01-01
High temperature Raman spectroscopy is used tostudy the vibrational modes and structures of the Nb205-K2S207(0 stoichiometry are performed...... in order to characterise the complex(es) formed. The determination of stoichiometry is done following a general procedure which is based on a simple formalism correlating measurements of relative Raman band intensities with the stoichiometry of solutes in molten salt solvents....
Directory of Open Access Journals (Sweden)
Yu.O. Slobodenjuk
2016-07-01
Full Text Available Based on the methods of analysis for calculating the electrical parameters of the mode of the traction power supply systems identified deficiencies related to the readability of the calculation and use of non-sinusoidal currents difficulties in that peculiar modern traction complexes with semiconductor converters. Using the methods of electrical engineering theory developed a model for calculating a continuous instantaneous mode parameters of the traction power supply systems, is different from the calculation methods that have been used previously by the fact that the original data is not averages, and pre-defined instantaneous values of electric current and speed. The model, in contrast to these methods is not large discreteness calculations, which greatly improves the quality of the calculation of the sudden change between the different modes of operation of electric and informative value in the calculation of power quality. The possibility of continuous operation for the entire simulation interval based on the location of the place of electric locomotives that move count distribution of voltage drop, loss of power and non-sinusoidal voltage coefficient for each of the electric contacts in place.
Małolepsza, Edyta; Straub, John E
2014-07-17
New sets of parameters (maps) for calculating amide I vibrational spectra for proteins through a vibrational exciton model are proposed. The maps are calculated as a function of electric field and van der Waals forces on the atoms of peptide bonds, taking into account the full interaction between peptide bonds and the surrounding environment. The maps are designed to be employed using data obtained from standard all-atom molecular simulations without any additional constraints on the system. Six proteins representing a wide range of sizes and secondary structure complexity were chosen as a test set. Spectra calculated for these proteins reproduce experimental data both qualitatively and quantitatively. The proposed maps lead to spectra that capture the weak second peak observed in proteins containing β-sheets, allowing for clear distinction between α-helical and β-sheet proteins. While the parametrization is specific to the CHARMM force field, the methodology presented can be readily applied to any empirical force field.
Tan, Qing-Hai; Zhang, Xin; Luo, Xiang-Dong; Zhang, Jun; Tan, Ping-Heng
2017-03-01
Two-dimensional transition metal dichalcogenides (TMDs) have attracted extensive attention due to their many novel properties. The atoms within each layer in two-dimensional TMDs are joined together by covalent bonds, while van der Waals interactions combine the layers together. This makes its lattice dynamics layer-number dependent. The evolutions of ultralow frequency ( 50 cm-1) vibration modes in few-layer TMDs and demonstrate how the interlayer coupling leads to the splitting of high-frequency vibration modes, known as Davydov splitting. Such Davydov splitting can be well described by a van der Waals model, which directly links the splitting with the interlayer coupling. Our review expands the understanding on the effect of interlayer coupling on the high-frequency vibration modes in TMDs and other two-dimensional materials. Project supported by the National Basic Research Program of China (No. 2016YFA0301200), the National Natural Science Foundation of China (Nos. 11225421, 11474277, 11434010, 61474067, 11604326, 11574305 and 51527901), and the National Young 1000 Talent Plan of China.
Directory of Open Access Journals (Sweden)
Byung-Keun Song
2017-10-01
Full Text Available This paper presents a new fuzzy sliding mode controller (FSMC to improve control performances in the presence of uncertainties related to model errors and external disturbance (UAD. As a first step, an adaptive control law is designed using Lyapunov stability analysis. The control law can update control parameters of the FSMC with a disturbance estimator (DE in which the closed-loop stability and finite-time convergence of tracking error are guaranteed. A solution for estimating the compensative quantity of the impact of UAD on a control system and a set of solutions are then presented in order to avoid the singular cases of the fuzzy-based function approximation, increase convergence ability, and reduce the calculating cost. Subsequently, the effectiveness of the proposed controller is verified through the investigation of vibration control performances of a semi-active vehicle suspension system featuring a magnetorheological damper (MRD. It is shown that the proposed controller can provide better control ability of vibration control with lower consumed power compared with two existing fuzzy sliding mode controllers.
McMicken, Brady; Parker, James E; Thomas, Robert J; Brancaleon, Lorenzo
2016-09-01
The ability to modify the conformation of a protein by controlled partial unfolding may have practical applications such as inhibiting its function or providing non-native photosensitive properties. A water-soluble porphyrin, meso-tetrakis (p-sulfonatophenyl) porphyrin (TSPP), non-covalently bound to tubulin can be used as a photosensitizer, which upon irradiation can lead to conformational changes of the protein. To fully understand the mechanism responsible for this partial unfolding and determine the amino acid residues and atoms involved, it is essential to find the most likely binding location and the configuration of the ligand and protein. Techniques typically used to analyze atomic position details, such as nuclear magnetic resonance and X-ray crystallography, require large concentrations, which are incompatible with the dilute conditions required in experiments for photoinduced mechanisms. Instead, we develop an atomistic description of the TSPP-tubulin complex using vibrational mode analysis from density functional theory calculations correlated to resonance Raman spectra of the porphyrin paired with docking simulations. Changes in the Raman peaks of the porphyrin molecule correlate with changes in its structural vibrational modes when bound to tubulin. The data allow us to construct the relative geometry of the porphyrin when bound to protein, which are then used with docking simulations to find the most likely configuration of the TSPP-tubulin complex.
Majumder, Moumita; Dawes, Richard; Wang, Xiao-Gang; Carrington, Tucker; Li, Jun; Guo, Hua; Manzhos, Sergei
2014-06-01
New potential energy surfaces for methane were constructed, represented as analytic fits to about 100,000 individual high-level ab initio data. Explicitly-correlated multireference data (MRCI-F12(AE)/CVQZ-F12) were computed using Molpro [1] and fit using multiple strategies. Fits with small to negligible errors were obtained using adaptations of the permutation-invariant-polynomials (PIP) approach [2,3] based on neural-networks (PIP-NN) [4,5] and the interpolative moving least squares (IMLS) fitting method [6] (PIP-IMLS). The PESs were used in full-dimensional vibrational calculations with an exact kinetic energy operator by representing the Hamiltonian in a basis of products of contracted bend and stretch functions and using a symmetry adapted Lanczos method to obtain eigenvalues and eigenvectors. Very close agreement with experiment was produced from the purely ab initio PESs. References 1- H.-J. Werner, P. J. Knowles, G. Knizia, 2012.1 ed. 2012, MOLPRO, a package of ab initio programs. see http://www.molpro.net. 2- Z. Xie and J. M. Bowman, J. Chem. Theory Comput 6, 26, 2010. 3- B. J. Braams and J. M. Bowman, Int. Rev. Phys. Chem. 28, 577, 2009. 4- J. Li, B. Jiang and Hua Guo, J. Chem. Phys. 139, 204103 (2013). 5- S Manzhos, X Wang, R Dawes and T Carrington, JPC A 110, 5295 (2006). 6- R. Dawes, X-G Wang, A.W. Jasper and T. Carrington Jr., J. Chem. Phys. 133, 134304 (2010).
Energy Technology Data Exchange (ETDEWEB)
Hu, S.; Mukherjee, A.; Spiro, T.G. (Princeton Univ., NJ (United States))
1993-12-29
Resonance Raman (RR) and FT-IR spectra are reported for nickel(II) 1,5-dihydroxy-1,5-dimethyloctaethylbacteriochlorin [Ni(HOEBC)] and its meso-d[sub 4] isotopomer. All the in-plane skeletal RR-active modes and most IR-active modes are assigned with the aid of a normal mode analysis by using a force field developed for nickel(II) octaethylporphyrin and by scaling the bond stretch force constants to bond lengths revealed in the crystal structure of nickel(II) octaethylbacteriochlorin. The calculated eigenvectors provide insight into the essential vibrational characteristics of metallobacteriochlorins. The RR spectra of Ni(HOEBC) were acquired with a variety of excitation wavelengths, near resonance with the B[sub x], Q[sub x], and Q[sub y] transitions. The enhancement pattern of the observed RR intensities reveals that the B[sub x]- and near-Q[sub y]-resonant spectra are dominated by Franck-Condon-active modes while the Q[sub x]-resonant spectrum is dominated by vibronically active modes. The B[sub x]-resonant spectrum also shows significant vibronic scattering, via coupling between the B[sub x]- and B[sub y]-excited states. Frequencies correlate well among Ni(II) complexes of octaethylporphine (OEP) and hydroporphyrins for modes containing similar local mode contributions, when allowance is made for C[sub beta]-C[sub beta] bond order reduction and the effects of symmetry lowering. Assignments are proposed for the existing RR data on bacteriochlorophyll a. 32 refs., 14 figs., 6 tabs.
Michotte, Jean-Bernard; Staderini, Enrico; Le Pennec, Deborah; Dugernier, Jonathan; Rusu, Rares; Roeseler, Jean; Vecellio, Laurent; Liistro, Giuseppe; Reychler, Grégory
2016-08-01
Backround: Coupling nebulization with noninvasive ventilation (NIV) has been shown to be effective in patients with respiratory diseases. However, a breath-synchronized nebulization option that could potentially improve drug delivery by limiting drug loss during exhalation is currently not available on bilevel ventilators. The aim of this in vitro study was to compare aerosol delivery of amikacin with a vibrating mesh nebulizer coupled to a single-limb circuit bilevel ventilator, using conventional continuous (Conti-Neb) and experimental inspiratory synchronized (Inspi-Neb) nebulization modes. Using an adult lung bench model of NIV, we tested a vibrating mesh device coupled with a bilevel ventilator in both nebulization modes. Inspi-Neb delivered aerosol only during the whole inspiratory phase, whereas Conti-Neb delivered aerosol continuously. The nebulizer was charged with amikacin solution (250 mg/3 mL) and placed at two different positions: between the lung and exhalation port and between the ventilator and exhalation port. Inhaled, expiratory wasted and circuit lost doses were assessed by residual gravimetric method. Particle size distribution of aerosol delivered at the outlet of the ventilator circuit during both nebulization modes was measured by laser diffraction method. Regardless of the nebulizer position, Inspi-Neb produced higher inhaled dose (p lung and exhalation port (48.7% ± 0.3% of the nominal dose). During simulated NIV with a single-limb circuit bilevel ventilator, the use of inspiratory synchronized vibrating mesh nebulization improves respirable dose and reduces drug loss of amikacin compared with continuous vibrating mesh nebulization.
Kvaternik, R. G.
1975-01-01
Two computational procedures for analyzing complex structural systems for their natural modes and frequencies of vibration are presented. Both procedures are based on a substructures methodology and both employ the finite-element stiffness method to model the constituent substructures. The first procedure is a direct method based on solving the eigenvalue problem associated with a finite-element representation of the complete structure. The second procedure is a component-mode synthesis scheme in which the vibration modes of the complete structure are synthesized from modes of substructures into which the structure is divided. The analytical basis of the methods contains a combination of features which enhance the generality of the procedures. The computational procedures exhibit a unique utilitarian character with respect to the versatility, computational convenience, and ease of computer implementation. The computational procedures were implemented in two special-purpose computer programs. The results of the application of these programs to several structural configurations are shown and comparisons are made with experiment.
Park, G. Barratt; Baraban, Joshua H.; Field, Robert W.
2014-10-01
A full-dimensional Franck-Condon calculation has been applied to the tilde{A} 1Au—tilde{X} ^1Σ _g^+ transition in acetylene in the harmonic normal mode basis. Details of the calculation are discussed in Part I of this series. To our knowledge, this is the first full-dimensional Franck-Condon calculation on a tetra-atomic molecule undergoing a linear-to-bent geometry change. In the current work, the vibrational intensity factors for levels involving excitation in ungerade vibrational modes are evaluated. Because the Franck-Condon integral accumulates away from the linear geometry, we have been able to treat the out-of-plane component of trans bend (ν _4^' ' }) in the linear tilde{X} state in the rotational part of the problem, restoring the χ Euler angle and the a-axis Eckart conditions. A consequence of the Eckart conditions is that the out-of-plane component of ν _4^' ' } does not participate in the vibrational overlap integral. This affects the structure of the coordinate transformation and the symmetry of the vibrational wavefunctions used in the overlap integral, and results in propensity rules involving the bending modes of the tilde{X} state that were not previously understood. We explain the origin of some of the unexpected propensities observed in IR-UV laser-induced fluorescence spectra, and we calculate emission intensities from bending levels of the tilde{A} state into bending levels of the tilde{X} state, using normal bending mode and local bending mode basis sets. Our calculations also reveal Franck-Condon propensities for the Cartesian components of the cis bend (ν _5^' ' }), and we predict that the best tilde{A}-state vibrational levels for populating tilde{X}-state levels with large amplitude bending motion localized in a single C-H bond (the acetylene↔vinylidene isomerization coordinate) involve a high degree of excitation in ν _6^' } (cis-bend). Mode ν _4^' } (torsion) populates levels with large amplitude counter-rotational motion of
Kwac, Kijeong; Lee, Hochan; Cho, Minhaeng
2004-01-01
By carrying out molecular dynamics simulations of an N-methylacetamide (NMA) in methanol solution, the amide I mode frequency fluctuation and hydrogen bonding dynamics were theoretically investigated. Combining an extrapolation formula developed from systematic ab initio calculation studies of NMA-(CH3OH)n clusters with a classical molecular dynamics simulation method, we were able to quantitatively describe the solvatochromic vibrational frequency shift induced by the hydrogen-bonding interaction between NMA and solvent methanol. It was found that the fluctuating amide I mode frequency distribution is notably non-Gaussian and it can be decomposed into two Gaussian peaks that are associated with two distinctively different solvation structures. The ensemble-average-calculated linear response function associated with the IR absorption is found to be oscillating, which is in turn related to the doublet amide I band shape. Numerically calculated infrared absorption spectra are directly compared with experiment and the agreement was found to be excellent. By using the Onsager's regression hypothesis, the rate constants of the interconversion process between the two solvation structures were obtained. Then, the nonlinear response functions associated with two-dimensional infrared pump-probe spectroscopy were simulated. The physics behind the two-dimensional line shape and origin of the cross peaks in the time-resolved pump-probe spectra is explained and the result is compared with 2D spectra experimentally measured recently by Woutersen et al. [S. Woutersen, Y. Mu, G. Stock, and P. Hamm, Chem. Phys. 266, 137 (2001)].
Source-receptor matrix calculation with a Lagrangian particle dispersion model in backward mode
Directory of Open Access Journals (Sweden)
P. Seibert
2004-01-01
Full Text Available The possibility to calculate linear-source receptor relationships for the transport of atmospheric trace substances with a Lagrangian particle dispersion model (LPDM running in backward mode is shown and presented with many tests and examples. This mode requires only minor modifications of the forward LPDM. The derivation includes the action of sources and of any first-order processes (transformation with prescribed rates, dry and wet deposition, radioactive decay, etc.. The backward mode is computationally advantageous if the number of receptors is less than the number of sources considered. The combination of an LPDM with the backward (adjoint methodology is especially attractive for the application to point measurements, which can be handled without artificial numerical diffusion. Practical hints are provided for source-receptor calculations with different settings, both in forward and backward mode. The equivalence of forward and backward calculations is shown in simple tests for release and sampling of particles, pure wet deposition, pure convective redistribution and realistic transport over a short distance. Furthermore, an application example explaining measurements of Cs-137 in Stockholm as transport from areas contaminated heavily in the Chernobyl disaster is included.
Modeling of HeN+ clusters. II. Calculation of He3+ vibrational spectrum
Karlický, František; Lepetit, Bruno; Kalus, René; Paidarová, Ivana; Gadéa, Florent Xavier
2008-03-01
We have computed the vibrational spectrum of the helium ionized trimer He3+ using three different potential energy surfaces [D. T. Chang and G. L. Gellene, J. Chem. Phys. 119, 4694 (2003); E. Scifoni et al., ibid. 125, 164304 (2006); I. Paidarová et al., Chem. Phys. 342, 64 (2007)]. Differences in the details of these potential energy surfaces induce discrepancies between bound state energies of the order of 0.01eV. The effects of the geometric phase induced by the conical intersection between the ground electronic potential energy surface and the first excited one are studied by computing vibrational spectra with and without this phase. The six lowest vibrational bound states are negligibly affected by the geometric phase. Indeed, they correspond to wavefunctions localized in the vicinity of the linear symmetric configurations and can be assigned well defined vibrational quantum numbers. On the other hand, higher excited states are delocalized, cannot be assigned definite vibrational quantum numbers, and the geometric phase shifts their energies by approximately 0.005eV.
Fujisaki, Hiroshi; Yagi, Kiyoshi; Kikuchi, Hiroto; Takami, Toshiya; Stock, Gerhard
2017-01-01
Performing comprehensive quantum-chemical calculations, a vibrational Hamiltonian of acetylbenzonitrile is constructed, on the basis of which a quantum-mechanical "tier model" is developed that describes the vibrational dynamics following excitation of the CN stretch mode. Taking into account 36 vibrational modes and cubic and quartic anharmonic couplings between up to three different modes, the tier model calculations are shown to qualitatively reproduce the main findings of the experiments of Rubtsov and coworkers (2011), including the energy relaxation of the initially excited CN mode and the structure-dependent vibrational transport. Moreover, the calculations suggest that the experimentally measured cross-peak among the CN and CO modes does not correspond to direct excitation of the CO normal mode but rather reflects excited low-frequency vibrations that anharmonically couple to the CO mode. Complementary quasiclassical trajectory calculations are found to be in good overall agreement with the quantum calculations.
Shaw, D J; Panman, M R; Woutersen, S
2009-11-27
Vibrational energy relaxation of the NH-, OH-, and OD-stretching modes in hydrogen-bonded liquids has been investigated by means of infrared pump-probe spectroscopy. The relaxation rates have been determined both in neat liquids and in isotopic mixtures with systematically varied isotope fractions. In all liquids, the vibrational relaxation rate increases as the isotope fraction is increased and reaches a maximum in the neat liquid. The dependence of the relaxation rate on the isotope fraction suggests a relaxation channel in which the vibrational energy is partitioned between accepting modes of two neighboring molecules.
ENRICO FERMI FAST REACTOR SPENT NUCLEAR FUEL CRITICALLY CALCULATIONS: INTACT MODE
Energy Technology Data Exchange (ETDEWEB)
A.S. Mobasheran
1999-04-12
The purpose of this calculation is to perform intact mode and partially degraded mode criticality evaluations of the Department of Energy's (DOE) Enrico Fermi (EF) Spent Nuclear Fuel (SNF) co-disposed in a 5 Defense High-Level Waste (5-DHLW) Waste Package (WP) and emplaced in a Monitored Geologic Repository (MGR). The criticality evaluations estimate the values of the effective neutron multiplication factor, k{sub eff}, a measure of nuclear criticality potential, for the 5-DHLW/DOE SNF WP with intact or partially degraded internal configurations. These evaluations contribute to the WP design.
CFD calculations on the unsteady aerodynamic characteristics of a tilt-rotor in a conversion mode
Directory of Open Access Journals (Sweden)
Li Peng
2015-12-01
Full Text Available In order to calculate the unsteady aerodynamic characteristics of a tilt-rotor in a conversion mode, a virtual blade model (VBM and an real blade model (RBM are established respectively. A new multi-layer moving-embedded grid technique is proposed to reduce the numerical dissipation of the tilt-rotor wake in a conversion mode. In this method, a grid system generated abound the rotor accounts for rigid blade motions, and a new searching scheme named adaptive inverse map (AIM is established to search corresponding donor elements in the present moving-embedded grid system to translate information among the different computational zones. A dual-time method is employed to fulfill unsteady calculations on the flowfield of the tilt-rotor, and a second-order centered difference scheme considering artificial viscosity is used to calculate the flux. In order to improve the computing efficiency, the single program multiple data (SPMD model parallel acceleration technology is adopted, according to the characteristic of the current grid system. The lift and drag coefficients of an NACA0012 airfoil, the dynamic pressure distributions below a typical rotor plane, and the sectional pressure distributions on a three-bladed Branum–Tung tilt-rotor in hover flight are calculated respectively, and the present VBM and RBM are validated by comparing the calculated results with available experimental data. Then, unsteady aerodynamic forces and flowfields of an XV-15 tilt-rotor in different modes, such as a fixed conversion mode at different tilt angles (15°, 30°, 60° and a whole conversion mode which converses from 0° to 90°, are numerically simulated by the VBM and RBM respectively. By analyses and comparisons on the simulated results of unsteady aerodynamic forces of the tilt-rotor in different modes, some meaningful conclusions about distorted blade-tip vortex distribution and unsteady aerodynamic force variation in a conversion mode are obtained, and these
Cammi, R.; Cappelli, C.; Mennucci, B.; Tomasi, J.
2012-10-01
We present a new quantum chemical method for the calculation of the equilibrium geometry and the harmonic vibrational frequencies of molecular systems in dense medium at high pressures (of the order of GPa). The new computational method, named PCM-XP, is based on the polarizable continuum model (PCM), amply used for the study of the solvent effects at standard condition of pressure, and it is accompanied by a new method of analysis for the interpretation of the mechanisms underpinning the effects of pressure on the molecular geometries and the harmonic vibrational frequencies. The PCM-XP has been applied at the density functional theory level to diborane as a molecular system under high pressure. The computed harmonic vibrational frequencies as a function of the pressure have shown a satisfactory agreement with the corresponding experimental results, and the parallel application of the method of analysis has reveled that the effects of the pressure on the equilibrium geometry can be interpreted in terms of direct effects on the electronic charge distribution of the molecular solutes, and that the effects on the harmonic vibrational frequencies can be described in terms of two physically distinct effects of the pressure (curvature and relaxation) on the potential energy for the motion of the nuclei.
Calculation of the vibration properties of the Pd/Au (111 ordered surface alloy in its stable domain
Directory of Open Access Journals (Sweden)
Tigrine R.
2012-06-01
Full Text Available In the present paper, a calculation is presented for the vibration properties of the ordered surface alloy alloy Au(111 − (√3×√3R30° − Pd, which is a stable system in the temperature range of 500K to 600K. This surface alloy is formed by depositing Pd atoms onto the Au(111surface, and annealing at higher temperatures. The matching theory is applied to calculate the surface phonons and local vibration densities of states (LDOS for the clean Au (111 surface, and for the Au(111 − (√3×√3R30° − Pd surface alloy. Our theoretical results for the surface phonon branches of the clean Au (111 surface compare favorably with previous ab initio results and experimental data. In contrast, there are no previous results for the vibrational LDOS for the atomic Au site in a clean Au (111 surface, or results for the surface phonons and vibration spectra for the surface alloy. The surface phonons are calculated for the clean Au (111 surface and the ordered surface alloy along three directions of high symmetry, namely, ΓΜ¯, MML:MK¯ $overline {Gamma {m M}} ,{m{ }}overline {{m{MK}}} $ , and KΓ¯ $overline {KGamma } $ . The phonon branches are strongly modified from the Au (111 surface to the surface alloy. In particular a remarkable change takes place for the LDOS between the clean Au (111 surface and the surface alloy, which may find its origin in the charge transfer from Au atoms to Pd atoms.
Vandenrijt, Jean-François; Thizy, Cédric; Georges, Marc P.
2015-08-01
We present investigation of interferometric methods for vibration mode identification to be applied on shakers in industrial environment. We consider long wave infrared ESPI in time-averaged mode with the use of phase-stepping which allows transforming Bessel fringes, typical to the time averaging, into phase values which provide a better way for identification of vibration mode shapes. The use of long laser wavelength allows measuring larger amplitudes of vibrations compared to what is achieved in visible light. Also longer wavelengths allow lower sensitivity to external perturbations. Time-averaged phase-stepped shearography in visible is also used as a compared alternative to LWIR ESPI for working in industrial environments. Although not demonstrated here, an interesting feature for the future investigations on LWIR ESPI is its potentiality of simultaneous temperature measurement during vibrations.
Mielke, Steven L; Truhlar, Donald G
2015-01-28
We present an improved version of our "path-by-path" enhanced same path extrapolation scheme for Feynman path integral (FPI) calculations that permits rapid convergence with discretization errors ranging from O(P(-6)) to O(P(-12)), where P is the number of path discretization points. We also present two extensions of our importance sampling and stratified sampling schemes for calculating vibrational-rotational partition functions by the FPI method. The first is the use of importance functions for dihedral angles between sets of generalized Jacobi coordinate vectors. The second is an extension of our stratification scheme to allow some strata to be defined based only on coordinate information while other strata are defined based on both the geometry and the energy of the centroid of the Feynman path. These enhanced methods are applied to calculate converged partition functions by FPI methods, and these results are compared to ones obtained earlier by vibrational configuration interaction (VCI) calculations, both calculations being for the Jordan-Gilbert potential energy surface. The earlier VCI calculations are found to agree well (within ∼1.5%) with the new benchmarks. The FPI partition functions presented here are estimated to be converged to within a 2σ statistical uncertainty of between 0.04% and 0.07% for the given potential energy surface for temperatures in the range 300-3000 K and are the most accurately converged partition functions for a given potential energy surface for any molecule with five or more atoms. We also tabulate free energies, enthalpies, entropies, and heat capacities.
A CALCULATION METHOD OF TRANSIENT MODES OF ELECTRIC SHIPS’ PROPELLING ELECTRIC PLANTS
Directory of Open Access Journals (Sweden)
V. A. Yarovenko
2017-12-01
Full Text Available The purpose of the work is to develop the method for calculating the transient modes of electric ships’ propelling electric plants during maneuver. This will allow us to evaluate and improve the maneuverability of vessels with electric motion. Methodology. The solution to the problems is proposed to be carried out on the basis of mathematical modeling of maneuvering modes. The duration of transient modes in an electric power plant at electric ships’ maneuvers is commensurable with the transient operation modes of the vessel itself. Therefore, the analysis of the electric power plants’ maneuvering modes should be made in unity with all the components of the ship’s propulsion complex. Results. A specified mathematical model of transient regimes of electric ship’s propulsion complex, including thermal motors, synchronous generators, electric power converters, propulsion motors, propellers, rudder, ship’s hull is developed. The model is universal. It covers the vast majority of modern and promising electric ships with a traditional type of propulsors. It allows calculating the current values of the basic mode indicators and assessing the quality indicators of maneuvering. The model is made in relative units. Dimensionless parameters of the complex are obtained. These parameters influence the main indicators of the quality of maneuvering. The adequacy of the suggested specified mathematical model and the developed computation method based on it were confirmed. To do this, the results of mathematical modeling for a real electric ship were compared with the data obtained in the course of field experiments conducted by other researchers. Originality. The mathematical description of a generator unit, as an integral part of an indivisible ship’s propulsion complex, makes it possible to calculate the dynamic operation modes of electric power sources during electric vessels’ maneuvering. There is an opportunity to design the electric ships
Faizan, Mohd; Alam, Mohammad Jane; Ahmad, Shabbir
2017-11-01
In the present investigation, spectroscopic techniques (FTIR, FT-Raman and UV-Vis) and quantum chemical calculations are employed for exploring vibrational and electronic spectra of sulindac compound. The calculations are performed on most stable conformer of the sulindac molecule using density functional theory (DFT). Anharmonic corrections are made to frequencies using vibrational second-order perturbation theory (VPT2). The effect of intermolecular interactions on the vibrational dynamics has been analyzed using dimeric structure of sulindac molecule. Hirshfeld surface analysis and 2D fingerprint plots are utilized to investigate the nature of interaction present in the crystal system. To account for electronic spectra in different solvents, an integral equation formalism of polarizable continuum model (IEFPCM) at TD-DFT/B3LYP/6-31G(d,p) level of theory has been employed. An excellent agreement between the theoretical and experimental data over the entire spectral region is observed. In addition, natural bond orbital (NBO) analysis, frontier molecular orbitals, nonlinear optical properties (NLO) and molecular electrostatic potential (MEP) analysis are also reported.
Ramos, J. M.; de M. Cruz, M. T.; Costa, A. C., Jr.; Ondar, G. F.; Ferreira, Glaucio B.; Raniero, L.; Martin, A. A.; Versiane, O.; Téllez Soto, C. A.
2012-11-01
The aspartateguanidoacetatenickel (II) complex, [Ni(Asp)(GAA)], was synthesized and structural analysis was performed by means of the experimental methods: determination of the C, H, N and O contents, thermogravimetry, infrared and Raman spectroscopy. DFT:B3LYP/6-311G(d, p) calculations have been performed giving optimized structure and harmonic vibrational wavenumbers. Second derivative of the FT-infrared, FT-Raman and Surface Raman Enhanced Scattering (SERS) spectra, and band deconvolution analysis were also performed. Features of the FT-infrared, FT-Raman and SERS confirmed theoretical structure prediction. Full assignment of the vibrational spectrum was also supported by a carefully analysis of the distorted geometries generated by the normal modes. The Natural Bond Orbital analysis (NBO) was also carried out as a way to study the Ni (II) hybridization leading to the pseudo planar geometry of the framework, and the extension of the atomic N and O hybrid orbital of the different amino acids in the bond formation. Bands of charge transfer and d-d transitions were assigned in the UV-Vis spectrum.
Zakharov, Ia. V.; Kuznetsov, A. G.; Podivilov, E. V.; Babin, S. A.
2017-11-01
We present the calculation and experimental verification of the operation of a collimator coupling a light beam into an optical fibre with an As2S3 nonlinear plate. It is shown that a Kerr lens formed in the plate with an increase in the peak pulse power leads to an increase in the output coupling ratio by about 15%, which can be used for the passive mode locking of a fibre laser.
First Principles Calculation of the Damping and Quasielastic Mode of DHCP-Pr
DEFF Research Database (Denmark)
Yang, D.; Lindgård, Per-Anker
1979-01-01
Starting with the interaction between the conduction and 4f electrons and taking the single-ion levels of Pr to be a singlet and a doublet, we have derived the dynamical susceptibility for dhcp Pr with Mori's memory function formalism [1]. The dynamics of the electron hole relaxation reflects...... of the Fermi surface. The result of first principles calculations using RAPW energy bands for quasielastic mode is, however, too small comparing to the experimental observations [2]....
Chung, Heeteak; Prado, Karl L; Yi, Byong Yong
2014-02-21
Phantom Scatter Factors, Sp in the Khan formalism (Khan et al 1980 J. Radiat. Oncol. Biol. Phys. 6 745-51) describe medium-induced changes in photon-beam intensity as a function of size of the beam. According to the British Journal of Radiology, Supplement 25, megavoltage phantom scatter factors are invariant as a function of photon-beam energy. However, during the commissioning of an accelerator with flattening filter free (FFF) photon beams (Varian TrueBeam(TM) 6-MV FFF and 10-MV FFF), differences were noted in phantom scatter between the filtered beams and FFF-mode beams. The purpose of this work was to evaluate this difference and provide an analytical formalism to explain the phantom scatter differences between FFF-mode and the filtered mode. An analytical formalism was devised to demonstrate the source of phantom scatter differences between the filtered and the FFF-mode beams. The reason for the differences in the phantom scatter factors between the filtered and the FFF-mode beams is hypothesized to be the non-uniform beam profiles of the FFF-mode beams. The analytical formalism proposed here is based on this idea, taking the product of the filtered phantom scatter factors and the ratio of the off-axis ratio between the FFF-mode and the filtered beams. All measurements were performed using a Varian TrueBeam(TM) linear accelerator with photon energies of 6-MV and 10-MV in both filtered and FFF-modes. For all measurements, a PTW Farmer type chamber and a Scanditronix CC04 cylindrical ionization were used. The in-water measurements were made at depth dose maximum and 100 cm source-to-axis distance. The in-air measurements were done at 100 cm source-to-axis distance with appropriate build-up cap. From these measurements, the phantom scatter factors were derived for the filtered beams and the FFF-mode beams for both energies to be evaluated against the phantoms scatter factors calculated using the proposed algorithm. For 6-MV, the difference between the measured
Dynamics of coupled vibration modes in a quantum non-linear mechanical resonator
Labadze, G.; Dukalski, M.S.; Blanter, Y.M.
2016-01-01
We investigate the behaviour of two non-linearly coupled flexural modes of a doubly clamped suspended beam (nanomechanical resonator). One of the modes is externally driven. We demonstrate that classically, the behavior of the non-driven mode is reminiscent of that of a parametrically driven
Vázquez, Juana; Harding, Michael E; Stanton, John F; Gauss, Jürgen
2011-05-10
A variational method for the calculation of low-lying vibrational energy levels of molecules with small amplitude vibrations is presented. The approach is based on the Watson Hamiltonian in rectilinear normal coordinates and characterized by a quasi-analytic integration over the kinetic energy operator (KEO). The KEO beyond the harmonic approximation is represented by a Taylor series in terms of the rectilinear normal coordinates around the equilibrium configuration. This formulation of the KEO enables its extension to arbitrary order until numerical convergence is reached for those states describing small amplitude motions and suitably represented with a rectilinear system of coordinates. A Gauss-Hermite quadrature grid representation of the anharmonic potential is used for all the benchmark examples presented. Results for a set of molecules with linear and nonlinear configurations, i.e., CO2, H2O, and formyl fluoride (HFCO), illustrate the performance of the method and the versatility of our implementation.
Saidi, Wissam A
2014-09-04
Defects are ubiquitous in carbon nanotubes (CNTs), despite their large formation energies, and have astounding effects on their physicochemical properties. In this study, we employ density-functional theory (DFT) calculations to study systematically the atomic structure, stability, and characteristic vibrations of pristine and defected zigzag CNTs, where the defects are of the form of Stone-Wales (SW) and diatom vacancies (DV). The DFT optimized structures and the phonon modes are subsequently used in conjunction with a semiempirical bond-polarization model to study the nonresonant Raman spectra. For each defect type, we find two CNT structures with defects parallel or oblique to the tube axis. For the SW defects, the two structures have similar formation energies, whereas for the DV defect, only defects parallel to the tube axis are likely to exist. The results show that the defects induce a blue shift in the radial breathing mode (RBM) of metallic CNTs, whereas this mode is not shifted for semiconducting CNTs. However, the RBM shift or its Raman profile is not sensitive to the defect type. The G-band showed more sensitivity to the defects in the form of a red/blue shift in the frequency, or a partial/complete defragmentation of the G bands.
Energy Technology Data Exchange (ETDEWEB)
Hajlaoui, Sondes, E-mail: hajlaouisondes@yahoo.fr [Unité de recherche de la matière condensée, Faculté des Sciences de Sfax, Université de Sfax, BP 1171, 3000, Sfax (Tunisia); Chaabane, Iskandar [Unité de recherche de la matière condensée, Faculté des Sciences de Sfax, Université de Sfax, BP 1171, 3000, Sfax (Tunisia); Lhoste, Jérôme; Bulou, Alain [LUNAM Université, Université du Maine, CNRS UMR 6283, Institut des Molécules et Matériaux du Mans (IMMM), Avenue Olivier Messiaen, 72085, Le Mans, Cedex 9 (France); Guidara, Kamel [Unité de recherche de la matière condensée, Faculté des Sciences de Sfax, Université de Sfax, BP 1171, 3000, Sfax (Tunisia)
2016-09-15
In this work a novel compound tertrapropylammonium aquapentachlorostannate dihydrate was synthesized and characterized by; single crystal X-ray diffraction, vibrational spectroscopy, differential scanning calorimetric and dielectric measurement. The crystal structure refinement at room temperature reveled that this later belongs to the monoclinic compound with P121/c1 space group with the following unit cell parameters a = 8.2699(3) Å, b = 12.4665(4) Å, c = 22.3341(7) Å and β = 92.94(0)°. The crystal arrangement can be described by stacked organic-inorganic layers in the c direction with two independent water molecules placed between each two layers. The detailed interpretations of the vibrational properties of the studied compound were performed using density functional theory (DFT) with the B3LYP/LanL2DZ basis set, and has enabled us to make the detailed assignments by comparative study of the experimental and calculated Raman and IR spectra. The differential scanning calorimetry (DSC) measurement disclosed two anomalies in the temperature range 356–376 (T{sub 1}) K and at 393 K (T{sub 2}) characterized by the dehydration of the sample and probably a reconstruction of a new structure after T{sub 2} transition. The temperature dependences of dielectric permittivity show a relaxation process around T{sub 2} anomaly indicating the occurrence of the disorder at high temperature. The dependence of the exponent m(T) on temperature, extracted from the straight lines of log(ε″) with log (ω), suggests that the correlated barrier hopping is the appropriate model for the conduction mechanism. - Highlights: • The single-crystal X-ray diffraction has been performed. • The assignments of the vibration modes based on DFT were reported and discussed. • Differential scanning calorimetric reveals the presence of two endothermic peaks. • The electric permittivity was studied using the impedance measurements. • The CBH is the appropriate model for the conduction
CALCULATION OF OPERATION MODE OF OUTDOOR LIGHTING LINE WITH BILATERAL SUPPLY. Part 2
Directory of Open Access Journals (Sweden)
V. B. Kozlovskaya
2017-01-01
Full Text Available The most important features of outdoor lighting lines are of considerable length and the use of a large number of light sources of an average power. Under such conditions, in order to determine and maintain the optimal modes of operation of outdoor lighting networks with a bilateral supply it is necessary to choose the wire section of the line. This section should provide the required voltage levels to the light sources in all modes, but it should not be too high, in order not to increase the cost of the grid. This article demonstrates an example of the choice of the optimum conductor cross-section of the lighting line when it is working in a normal mode (bilateral power supply with voltage levels at the power items of 230 V, as well as in the mode of unilateral power (at voltage loss in the second power item with a value of the voltage of 230 V in the first item of the power supply. The method of calculation of the mode of such a line that had been presented in part 1 of the article was used. The calculation is performed with the of MathCad software. The diagrams of the voltage distribution at items of the lighting line with bilateral power under conditions of different modes of functioning are plotted for various sections of aluminum conductors. The choice of the optimal values of the cross sections of the lighting network was based on the mentioned diagrams. The specific features of different modes of operation of the lighting line with the chosen conductor cross section were analyzed. Operating parameters for each phase of the line (i.e. voltage at the items of the circuit, power, currents, power loss and voltage drop in all sections were determined. The presented data make one possible to estimate the power consumption of the lighting line taking the daily schedule of enabling and disabling of outdoor lighting networks into account. The most economical modes were determined.
Vibrational spectroscopy of resveratrol
Billes, Ferenc; Mohammed-Ziegler, Ildikó; Mikosch, Hans; Tyihák, Ernő
2007-11-01
In this article the authors deal with the experimental and theoretical interpretation of the vibrational spectra of trans-resveratrol (3,5,4'-trihydroxy- trans-stilbene) of diverse beneficial biological activity. Infrared and Raman spectra of the compound were recorded; density functional calculations were carried out resulting in the optimized geometry and several properties of the molecule. Based on the calculated force constants, a normal coordinate analysis yielded the character of the vibrational modes and the assignment of the measured spectral bands.
Directory of Open Access Journals (Sweden)
J.-J. Sinou
2017-01-01
Full Text Available During the past decades, the problem of friction-induced vibration and noise has been the subject of a huge amount of works. Various numerical simulations with finite elements models have been largely investigated to predict squeal events. Although a nonlinear analysis is more predictive than Complex Eigenvalues Analysis, one of the main drawbacks of the time analysis is the need of large computational efforts. In view of the complexity of the subject, this approach appears still computationally too expensive to be used in industry for finite element models. In this study, the potential of a new reduced model based on a double modal synthesis (i.e., a classical modal reduction via Craig and Bampton plus a condensation at the frictional interface based on complex modes for the prediction of self-excited vibrations of brake squeal is discussed. The effectiveness of the proposed modal reduction is tested on a finite element model of a simplified brake system. It will be shown that numerical results of times analysis by applying the proposed reduction correlate well with those of the nonlinear analysis based on a reference model, hence demonstrating the potential of using adapted modal reductions to predict the squeal propensity and to estimate self-excited vibrations and noise.
Naumann, E. C.
1972-01-01
Vibration tests were carried out on truncated-cone shells with widely spaced ring stiffeners. The models were excited by an air shaker for LF modes and by small electrodynamic shakers for HF modes. The Novozhilov thin shell theory according to which a ring is an assembly of an arbitrary number of segments, each being a short truncated-cone shell of uniform thickness, is used in the analysis of the results. A mobile, noncontacting, displacement-sensitive sensor system developed by the author was used in the tests. Tests results are given for a free-free 60-deg cone and for a clamped-free 60-deg cone. The tests are characterized as having considerable value for the classification of prevalent multimode responses in shells of this type.
A Simple Reduction Process for the Normal Vibrational Modes Occurring in Linear Molecules
McInerny, William
2005-01-01
The students in molecular spectroscopy courses are often required to determine the permitted normal vibrations for linear molecules that belong to particular groups. The reducible group representations generated by the use of Cartesian coordinates can be reduced by the use of a simple algebraic process applied to the group representations. The…
Excess vibrational modes of a crystal in an external non-affine field
Indian Academy of Sciences (India)
Home; Journals; Journal of Chemical Sciences; Volume 129; Issue 7. Excess vibrational ... While the former couples to external stress with familiar consequences, the response of a crystal when nonaffine displacements are enhanced using the thermodynamically conjugate field, is relatively less studied. We examine this ...
Bubin, Sergiy; Stanke, Monika; Adamowicz, Ludwik
2011-08-01
In this work we report very accurate variational calculations of the complete pure vibrational spectrum of the D2 molecule performed within the framework where the Born-Oppenheimer (BO) approximation is not assumed. After the elimination of the center-of-mass motion, D2 becomes a three-particle problem in this framework. As the considered states correspond to the zero total angular momentum, their wave functions are expanded in terms of all-particle, one-center, spherically symmetric explicitly correlated Gaussian functions multiplied by even non-negative powers of the internuclear distance. The nonrelativistic energies of the states obtained in the non-BO calculations are corrected for the relativistic effects of the order of α2 (where α = 1/c is the fine structure constant) calculated as expectation values of the operators representing these effects.
Bubin, Sergiy; Stanke, Monika; Adamowicz, Ludwik
2011-04-01
All 18 bound pure vibrational levels of the HD molecule have been calculated within the framework that does not assume the Born-Oppenheimer (BO) approximation. The nonrelativistic energies of the states have been corrected for the relativistic effects of the order of α2 (where α is the fine structure constant), calculated using the perturbation theory with the nonrelativistic non-BO wave functions being the zero-order approximation. The calculations were performed by expanding the non-BO wave functions in terms of one-center explicitly correlated Gaussian functions multiplied by even powers of the internuclear distance and by performing extensive optimization of the Gaussian nonlinear parameters. Up to 10 000 basis functions were used for each state.
Xu, Pei-Cang; Li, Ru-Bi; Shang, Tong-Ming; Zhou, Jian; Sun, Jian-Hua; You, Jing-Lin
2010-05-01
Silicate melts are special fractal dimension system that is metastable state of near-way order and far-way disorder. In this paper, the size of nanometer aggregation structure and the frequences of phonon vibration like mode in the low dimension silicate series (CaO-Al2O3-SiO2 and Na2-Al2O3-SiO2 series) synthesized via high temperature melting and sol gel methods were measured by means of small-angle X-ray scattering (SAXS), low wavenumber Raman spectrum (LWRS) and high temperature Raman spectrum (HTRS in situ measuring). The nanometer self-similarity aggregation structure(it's size is about a few nm to a few tens nm) and phonic phonon vibration like modes of low temperature silicate gel, high temperature silicate melts and it's quenching glasses phases were obtained. So a quantitative method by HTRS for measuring the aggregation size in the high temperature melts was established. The results showed that the aggregation size of the silicate melts is smaller at high temperature than at room temperature and the number of bridge oxygen in one Si-O tetrahedron in network structure units is decreasing at high temperature. This study work provides important theory and information for deliberating geochemistry characteristic, crystallization & evolution of natural magma and enhancing performance of low dimension silicate matelials.
Shiba, Hayato; Kawasaki, Takeshi; Onuki, Akira
2012-10-01
We investigate the dynamic heterogeneities of glassy particle systems in the theoretical schemes of bond breakage and four-point correlation functions. In the bond-breakage scheme, we introduce the structure factor S(b)(q,t) and the susceptibility χ(b)(t) to detect the spatial correlations of configuration changes. Here χ(b)(t) attains a maximum at t=t(b)(max) as a function of time t, where the fraction of the particles with broken bonds φ(b)(t) is about 1/2. In the four-point scheme, treating the structure factor S(4)(q,t) and the susceptibility χ(4)(t), we detect superpositions of the heterogeneity of bond breakage and that of thermal low-frequency vibration modes. While the former grows slowly, the latter emerges quickly to exhibit complex space-time behavior. In two dimensions, the vibration modes extending over the system yield significant contributions to the four-point correlations, which depend on the system size logarithmically. A maximum of χ(4)(t) is attained at t=t(4)(max), where these two contributions become of the same order. As a result, t(4)(max) is considerably shorter than t(b)(max).
Zeng, Jianhua; Chen, Lei; Dai, Qiaofeng; Lan, Sheng; Tie, Shaolong
2016-01-21
We proposed a scheme in which normal Raman scattering is coupled with hyper-Raman scattering for generating a strong anti-Stokes hyper-Raman scattering in nanomaterials by using femtosecond laser pulses. The proposal was experimentally demonstrated by using a single-layer MoS2 on a SiO2/Si substrate, a 17 nm-thick MoS2 on an Au/SiO2 substrate and a 9 nm-thick MoS2 on a SiO2-SnO2/Ag/SiO2 substrate which were confirmed to be highly efficient for second harmonic generation. A strong anti-Stokes hyper-Raman scattering was also observed in other nanomaterials possessing large second-order susceptibilities, such as silicon quantum dots self-assembled into "coffee" rings and tubular Cu-doped ZnO nanorods. In all the cases, many Raman inactive vibration modes were clearly revealed in the anti-Stokes hyper-Raman scattering. Apart from the strong anti-Stokes hyper-Raman scattering, Stokes hyper-Raman scattering with small Raman shifts was detected during the ablation process of thick MoS2 layers. It was also observed by slightly defocusing the excitation light. The detection of anti-Stokes hyper-Raman scattering may serve as a new technique for studying the Raman inactive vibration modes in nanomaterials.
Lin, Changyu; Djordjevic, Ivan B; Zou, Ding
2015-06-29
We propose a method to estimate the lower bound of achievable information rates (AIRs) of high speed orthogonal frequency-division multiplexing (OFDM) in spatial division multiplexing (SDM) optical long-haul transmission systems. The estimation of AIR is based on the forward recursion of multidimensional super-symbol efficient sliding-window Bahl-Cocke-Jelinek-Raviv (BCJR) algorithm. We consider most of the degradations of fiber links including nonlinear effects in few-mode fiber (FMF). This method does not consider the SDM as a simple multiplexer of independent data streams, but provides a super-symbol version for AIR calculation over spatial channels. This super-symbol version of AIR calculation algorithm, in principle, can be used for arbitrary multiple-input-multiple-output (MIMO)-SDM system with channel memory consideration. We illustrate this method by performing Monte Carlo simulations in a complete FMF model. Both channel model and algorithm for calculation of the AIRs are described in details. We also compare the AIRs results for QPSK/16QAM in both single mode fiber (SMF)- and FMF-based optical OFDM transmission.
Local vibration of an elastic plate and zero-group velocity Lamb modes.
Prada, Claire; Clorennec, Dominique; Royer, Daniel
2008-07-01
Elastic plates or cylinders can support guided modes with zero group velocity (ZGV) at a nonzero value of the wave number. Using laser-based ultrasonic techniques, we experimentally investigate some fascinating properties of these ZGV modes: resonance and ringing effects, backward wave propagation, interference between backward and forward modes. Then, the conditions required for the existence of ZGV Lamb modes in isotropic plates are discussed. It is shown that these modes appear in a range of Poisson's ratio about the value for which the cutoff frequency curves of modes belonging to the same family intercept, i.e., for a bulk wave velocity ratio equal to a rational number. An interpretation of this phenomenon in terms of a strong repulsion between a pair of modes having a different parity in the vicinity of the cutoff frequencies is given. Experiments performed with materials of various Poisson's ratio demonstrate that the resonance spectrum of an unloaded elastic plate, locally excited by a laser pulse, is dominated by the ZGV Lamb modes.
Particle-vibration coupling: Recent advances in microscopic calculations with the Skyrme Hamiltonian
Energy Technology Data Exchange (ETDEWEB)
Colò, G., E-mail: gianluca.colo@mi.infn.it [Università degli Studi di Milano, Dipartimento di Fisica (Italy); Baldo, M. [Sez. di Catania, Istituto Nazionale di Fisica Nucleare (INFN) (Italy); Bortignon, P. F.; Rizzo, D.; Bocchi, G. [Università degli Studi di Milano, Dipartimento di Fisica (Italy)
2016-11-15
In this contribution, we report some recent progress in our understanding of particle-vibration coupling (PVC) in nuclei. In particular, we first review the formal development that has allowed some of us to deduce the PVC equations within the Green’s functionmethod. Applications are then discussed, both in the case of single-particle states and giant resonances in magic nuclei. We also present a new model that extends the PVC ansatz and is meant to account for the complete low-lying spectra of odd nuclei.
Chebodayev, M. I.
2017-10-01
Within the framework of the linear thermal elasticity theory a dynamic thermoelastic bending of a whisker crystal is considered under conditions of its irradiation with a high-current electron beam of nanosecond duration. It is shown that the characteristic time of leveling the temperature of superthin pin-type rod nonuniformely heated over its thickness is comparable with the period of the fundamental wave of flexural vibrations. This gives rise to a considerable decrease in the bending amplitude, which is concurrent with the heat conduction processes.
Ucun, Fatih; Sağlam, Adnan; Güçlü, Vesile
2007-06-01
The molecular structures, vibrational frequencies and corresponding vibrational assignments of xanthine and its methyl derivatives (caffeine and theobromine) have been calculated using ab initio Hartree-Fock (HF) and density functional theory (B3LYP) methods with 6-31G(d, p) basis set level. The calculations were utilized to the CS symmetries of the molecules. The obtained vibrational frequencies and optimised geometric parameters (bond lengths and bond angles) were seen to be well agreement with the experimental data. The used scale factors which have been obtained the ratio of the frequency values of the strongest peaks in the calculated and experimental spectra seem to cause the gained vibrations well corresponding to the experimental ones. Theoretical infrared intensities and Raman activities are also reported.
Ab Initio Potential Energy Surfaces and the Calculation of Accurate Vibrational Frequencies
Lee, Timothy J.; Dateo, Christopher E.; Martin, Jan M. L.; Taylor, Peter R.; Langhoff, Stephen R. (Technical Monitor)
1995-01-01
Due to advances in quantum mechanical methods over the last few years, it is now possible to determine ab initio potential energy surfaces in which fundamental vibrational frequencies are accurate to within plus or minus 8 cm(exp -1) on average, and molecular bond distances are accurate to within plus or minus 0.001-0.003 Angstroms, depending on the nature of the bond. That is, the potential energy surfaces have not been scaled or empirically adjusted in any way, showing that theoretical methods have progressed to the point of being useful in analyzing spectra that are not from a tightly controlled laboratory environment, such as vibrational spectra from the interstellar medium. Some recent examples demonstrating this accuracy will be presented and discussed. These include the HNO, CH4, C2H4, and ClCN molecules. The HNO molecule is interesting due to the very large H-N anharmonicity, while ClCN has a very large Fermi resonance. The ab initio studies for the CH4 and C2H4 molecules present the first accurate full quartic force fields of any kind (i.e., whether theoretical or empirical) for a five-atom and six-atom system, respectively.
Villani, Vincenzo; Pucciariello, Rachele; Crimella, Tiziano; Stradi, Riccardo
1993-10-01
A theoretical study of PIDOTIMOD, a new immunostimulating dipeptide, using a combination of molecular mechanics, normal mode analysis and dynamics methods, has been carried out. The results have been compared with the experimental ones obtained using NMR spectroscopy. Conformational calculations and NMR spectra identify two classes of conformers, trans and cis, around the peptide bond between the rings, with relative conformational populations of 0.55 and 0.45, respectively. The best agreement is obtained using a dielectric constant ɛ = 7 in the calculations. The conformational features show that the path connecting the trans and the cis forms may involve the rotation of the bridged peptide bond alone. From a dynamic point of view the conformers appear rather rigid, and only the oxo-prolyl ring and the carboxyl group show significant rigid body-like motions. Interesting correlations occur in the fluctuations of the torsion angles.
Directory of Open Access Journals (Sweden)
Xiaofei Zhang
2018-01-01
Full Text Available Multi-frequency scanning near-field optical microscopy, based on a quartz tuning fork-probe (QTF-p sensor using the first two orders of in-plane bending symmetrical vibration modes, has recently been developed. This method can simultaneously achieve positional feedback (based on the 1st in-plane mode called the low mode and detect near-field optically induced forces (based on the 2nd in-plane mode called the high mode. Particularly, the high mode sensing performance of the QTF-p is an important issue for characterizing the tip-sample interactions and achieving higher resolution microscopic imaging but the related researches are insufficient. Here, we investigate the vibration performance of QTF-p at high mode based on the experiment and finite element method. The frequency spectrum characteristics are obtained by our homemade laser Doppler vibrometer system. The effects of the properties of the connecting glue layer and the probe features on the dynamic response of the QTF-p sensor at the high mode are investigated for optimization design. Finally, compared with the low mode, an obvious improvement of quality factor, of almost 50%, is obtained at the high mode. Meanwhile, the QTF-p sensor has a high force sensing sensitivity and a large sensing range at the high mode, indicating a broad application prospect for force sensing.
Zhang, Xiaofei; Gao, Fengli; Li, Xide
2018-01-24
Multi-frequency scanning near-field optical microscopy, based on a quartz tuning fork-probe (QTF-p) sensor using the first two orders of in-plane bending symmetrical vibration modes, has recently been developed. This method can simultaneously achieve positional feedback (based on the 1st in-plane mode called the low mode) and detect near-field optically induced forces (based on the 2nd in-plane mode called the high mode). Particularly, the high mode sensing performance of the QTF-p is an important issue for characterizing the tip-sample interactions and achieving higher resolution microscopic imaging but the related researches are insufficient. Here, we investigate the vibration performance of QTF-p at high mode based on the experiment and finite element method. The frequency spectrum characteristics are obtained by our homemade laser Doppler vibrometer system. The effects of the properties of the connecting glue layer and the probe features on the dynamic response of the QTF-p sensor at the high mode are investigated for optimization design. Finally, compared with the low mode, an obvious improvement of quality factor, of almost 50%, is obtained at the high mode. Meanwhile, the QTF-p sensor has a high force sensing sensitivity and a large sensing range at the high mode, indicating a broad application prospect for force sensing.
National Aeronautics and Space Administration — The Phase I project successfully demonstrated that the advanced non-contacting stress measurement system (NSMS) was able to address closely spaced modes and...
Singh, Harshita; Singh, Swapnil; Srivastava, Anubha; Tandon, Poonam; Bharti, Purnima; Kumar, Sudhir; Maurya, Rakesh
2014-01-01
Daidzein (C15H10O4) is a type of isoflavone. It was isolated from Butea monosperma that belongs to the Fabaceae family. Soybeans and soy products are the abundant source of daidzein. It is the subject of investigation for many reasons, as it has got wide applications, such as anti-tumor, anti-estrogen, weak pro-estrogen and anti-cancer activities. In the present study, a complete vibrational assignment is provided for the observed IR and Raman spectra of daidzein. Electronic properties have been analyzed using TD-DFT method for both gaseous and solvent phase. The optimized geometry, total energy, potential energy surface and vibrational wavenumbers of daidzein have been determined using density functional theory (DFT/B3LYP) method with 6-311++G(d,p) basis set and a good correlation was found between observed and calculated values. The double well potential energy curve of the molecule about three bonds, has been plotted, as obtained from DFT/6-31G basis. The HOMO-LUMO energy gap of possible conformers has been calculated for comparing their chemical activity. Global reactivity descriptors have been calculated for predicting the chemical reactivity and the stability of chemical systems. Electrostatic potential surface has been plotted for predicting the structure activity relationship. NBO analysis has also been performed to study the stability of the molecule. NLO study reveals the nonlinear properties of the molecule. 1H and 13C NMR spectra have also been studied. Finally, the calculated results were used to simulate infrared and Raman spectra of the title compound which showed a good agreement with the observed spectra. Copyright © 2013 Elsevier B.V. All rights reserved.
Evoli, Stefania
2016-11-10
Human serum albumin possesses multiple binding sites and transports a wide range of ligands that include the anti-inflammatory drug ibuprofen. A complete map of the binding sites of ibuprofen in albumin is difficult to obtain in traditional experiments, because of the structural adaptability of this protein in accommodating small ligands. In this work, we provide a set of predictions covering the geometry, affinity of binding and protonation state for the pharmaceutically most active form (S-isomer) of ibuprofen to albumin, by using absolute binding free energy calculations in combination with classical molecular dynamics (MD) simulations and molecular docking. The most favorable binding modes correctly reproduce several experimentally identified binding locations, which include the two Sudlow\\'s drug sites (DS2 and DS1) and the fatty acid binding sites 6 and 2 (FA6 and FA2). Previously unknown details of the binding conformations were revealed for some of them, and formerly undetected binding modes were found in other protein sites. The calculated binding affinities exhibit trends which seem to agree with the available experimental data, and drastically degrade when the ligand is modeled in a protonated (neutral) state, indicating that ibuprofen associates with albumin preferentially in its charged form. These findings provide a detailed description of the binding of ibuprofen, help to explain a wide range of results reported in the literature in the last decades, and demonstrate the possibility of using simulation methods to predict ligand binding to albumin.
Energy Technology Data Exchange (ETDEWEB)
Sadaoka, N.; Umegaki, K. [Hitachi, Ltd., Tokyo (Japan)
1996-01-25
A vortex-induced vibration of an array of elastically supported tubes is simulated in two-dimension by using a flow-induced vibration analysis program, which was developed in order to evaluate flow-induced vibration in various components such as heat exchangers. From a comparison of calculated results and experimental data, the following points are observed. (1) For the calculated results in a 5 {times} 5 square array, the flow pattern surrounding the first-row tubes is markedly different from that observed in the second-row or third-row tubes. This flow pattern is the same as that obtained from the experiment. (2) All tubes begin to oscillate due to unsteady fluid force and the oscillating mode is different for each row of tubes. These oscillation patterns show the same tendency in the experiments and it is concluded that the developed method can simulate vortex-induced vibration in an array of elastically supported tubes. 19 refs., 10 figs., 1 tab.
Bubin, Sergiy; Stanke, Monika; Adamowicz, Ludwik
2011-01-01
We recently presented very accurate calculations of the fundamental vibrational frequency of the ^7LiH^+ and ^3He^4He^+ ions [Stanke et al. Phys. Rev. A 79, 060501(R) (2009)] performed without the Born-Oppenheimer approximation and included leading relativistic corrections. The accuracy of those calculations was estimated to be of the order of 0.06 cm^{-1}. In the present work we extend the calculations to the remaining pure vibrational states of ^7LiH^+ and similarly accurate results are generated. They may lead to the experimental search for still unidentified lines corresponding to those transitions.
Observation of a universal donor-dependent vibrational mode in graphene.
Fedorov, A V; Verbitskiy, N I; Haberer, D; Struzzi, C; Petaccia, L; Usachov, D; Vilkov, O Y; Vyalikh, D V; Fink, J; Knupfer, M; Büchner, B; Grüneis, A
2014-01-01
Electron-phonon coupling and the emergence of superconductivity in intercalated graphite have been studied extensively. Yet, phonon-mediated superconductivity has never been observed in the 2D equivalent of these materials, doped monolayer graphene. Here we perform angle-resolved photoemission spectroscopy to try to find an electron donor for graphene that is capable of inducing strong electron-phonon coupling and superconductivity. We examine the electron donor species Cs, Rb, K, Na, Li, Ca and for each we determine the full electronic band structure, the Eliashberg function and the superconducting critical temperature Tc from the spectral function. An unexpected low-energy peak appears for all dopants with an energy and intensity that depend on the dopant atom. We show that this peak is the result of a dopant-related vibration. The low energy and high intensity of this peak are crucially important for achieving superconductivity, with Ca being the most promising candidate for realizing superconductivity in graphene.
DEFF Research Database (Denmark)
Mackeprang, Kasper; Kjærgaard, Henrik Grum
2017-01-01
The local mode perturbation theory (LMPT) model was developed to improve the description of hydrogen bonded XH-stretching transitions, where X is typically O or N. We present a modified version of the LMPT model to extend its application from hydrated bimolecular complexes to hydrogen bonded...... bimolecular complexes with donors such as alcohols, amines and acids. We have applied the modified model to a series of complexes of different hydrogen bond type and complex energy. We found that the differences between local mode (LM) and LMPT calculated fundamental XH-stretching transition wavenumbers...
Moorthy, N.; Prabakar, P. C. Jobe; Ramalingam, S.; Pandian, G. V.; Anbusrinivasan, P.
2016-04-01
In order to investigate the vibrational, electronic and NLO characteristics of the compound; benzaldehyde thiosemicarbazone (BTSC), the XRD, FT-IR, FT-Raman, NMR and UV-visible spectra were recorded and were analysed with the calculated spectra by using HF and B3LYP methods with 6-311++G(d,p) basis set. The XRD results revealed that the stabilized molecular systems were confined in orthorhombic unit cell system. The cause for the change of chemical and physical properties behind the compound has been discussed makes use of Mulliken charge levels and NBO in detail. The shift of molecular vibrational pattern by the fusing of ligand; thiosemicarbazone group with benzaldehyde has been keenly observed. The occurrence of in phase and out of phase molecular interaction over the frontier molecular orbitals was determined to evaluate the degeneracy of the electronic energy levels. The thermodynamical studies of the temperature region 100-1000 K to detect the thermal stabilization of the crystal phase of the compound were investigated. The NLO properties were evaluated by the determination of the polarizability and hyperpolarizability of the compound in crystal phase. The physical stabilization of the geometry of the compound has been explained by geometry deformation analysis.
Moorthy, N.; Jobe Prabakar, P. C.; Ramalingam, S.; Periandy, S.; Parasuraman, K.
2016-04-01
In order to explore the unbelievable NLO property of prepared Benzophenone thiosemicarbazone (BPTSC), the experimental and theoretical investigation has been made. The theoretical calculations were made using RHF and CAM-B3LYP methods at 6-311++G(d,p) basis set. The title compound contains Cdbnd S ligand which helps to improve the second harmonic generation (SHG) efficiency. The molecule has been examined in terms of the vibrational, electronic and optical properties. The entire molecular behavior was studied by their fundamental IR and Raman wavenumbers and was compared with the theoretical aspect. The molecular chirality has been studied by performing vibrational circular dichroism (circularly polarized infrared radiation). The Mulliken charge levels of the compound ensure the perturbation of atomic charges according to the ligand. The molecular interaction of frontier orbitals emphasizes the modification of chemical properties of the compound through the reaction path. The enormous amount of NLO activity was induced by the Benzophenone in thiosemicarbazone. The Gibbs free energy was evaluated at different temperature and from which the enhancement of chemical stability was stressed. The VCD spectrum was simulated and the optical dichroism of the compound has been analyzed.
Vibrationally Excited c-C_3H_2 Re-Visited New Laboratory Measurements and Theoretical Calculations
Gupta, Harshal; Westerfield, J. H.; Baraban, Joshua H.; Changala, Bryan; Thorwirth, Sven; Stanton, John F.; Martin-Drumel, Marie-Aline; Pirali, Olivier; Gottlieb, Carl A.; McCarthy, Michael C.
2017-06-01
Cyclopropenylidene, c-C_3H_2, is one of the more abundant organic molecules in the interstellar medium, as evidenced from astronomical detection of its single ^{13}C and both its singly- and doubly-deuterated isotopic species. For this reason, vibrational satellites are of considerable astronomical interest, and were the primary motivation for the earlier laboratory work by Mollaaghababa and co-workers [1]. The recent detection of intense unidentified lines near 18 GHz in a hydrocarbon discharge by FT microwave spectroscopy has spurred a renewed search for the vibrational satellite transitions of c-C_3H_2. Several strong lines have been definitively assigned to the v_6 progression on the basis of follow-up measurements at 3 mm, double resonance and millimeter-wave absorption spectroscopy, and new theoretical calculations using a rovibrational VMP2 method [2] and a high-quality ab initio potential energy surface. The treatment was applied to several excited states as well as the ground state, and included deperturbation of Coriolis interactions. [1] R. Mollaaghababa, C.A. Gottlieb, J. M. Vrtilek, and P. Thaddeus, J. Chem. Phys., 99, 890-896 (1992). [2] P. B. Changala and J. H. Baraban. J. Chem. Phys., 145, 174106 (2016).
Theoretical calculations and vibrational potential energy surface of 4-silaspiro(3,3)heptane.
Ocola, Esther J; Medders, Cross; Meinander, Niklas; Laane, Jaan
2014-04-28
Theoretical computations have been carried out on 4-silaspiro(3,3)heptane (SSH) in order to calculate its molecular structure and conformational energies. The molecule has two puckered four-membered rings with dihedral angles of 34.2° and a tilt angle of 9.4° between the two rings. Energy calculations were carried out for different conformations of SSH. These results allowed the generation of a two-dimensional ring-puckering potential energy surface (PES) of the form V = a(x1 (4) + x2 (4)) - b(x1 (2) + x2 (2)) + cx1 (2)x2 (2), where x1 and x2 are the ring-puckering coordinates for the two rings. The presence of sufficiently high potential energy barriers prevents the molecule from undergoing pseudorotation. The quantum states, wave functions, and predicted spectra resulting from the PESs were calculated.
Theoretical calculations and vibrational potential energy surface of 4-silaspiro(3,3)heptane
Ocola, Esther J.; Medders, Cross; Meinander, Niklas; Laane, Jaan
2014-04-01
Theoretical computations have been carried out on 4-silaspiro(3,3)heptane (SSH) in order to calculate its molecular structure and conformational energies. The molecule has two puckered four-membered rings with dihedral angles of 34.2° and a tilt angle of 9.4° between the two rings. Energy calculations were carried out for different conformations of SSH. These results allowed the generation of a two-dimensional ring-puckering potential energy surface (PES) of the form V = a(x14 + x24) - b(x12 + x22) + cx12x22, where x1 and x2 are the ring-puckering coordinates for the two rings. The presence of sufficiently high potential energy barriers prevents the molecule from undergoing pseudorotation. The quantum states, wave functions, and predicted spectra resulting from the PESs were calculated.
DEFF Research Database (Denmark)
Bludsky, O.; Bak, Keld L.; JORGENSEN, P
1995-01-01
The quartic force field and the cubic dipole moment surface are calculated for trans-2,3-dideuteriooxirane at the self-consistent field and the second order Moller-Plesset levels of theory using a triple zeta plus two polarization functions basis set. Contact transformation theory is used...... to determine the corresponding anharmonic vibrtional frequencies and intensities. Inclusion of anharmonicity improves agreement of the calculated frequencies and intensities with their experimental counterparts. The anharmonic corrections are much more sensitive to correlation effects for intensities than...
Wall-touching kink mode calculations with the M3D code
Energy Technology Data Exchange (ETDEWEB)
Breslau, J. A., E-mail: jbreslau@pppl.gov; Bhattacharjee, A. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08542 (United States)
2015-06-15
This paper seeks to address a controversy regarding the applicability of the 3D nonlinear extended MHD code M3D [W. Park et al., Phys. Plasmas 6, 1796 (1999)] and similar codes to calculations of the electromagnetic interaction of a disrupting tokamak plasma with the surrounding vessel structures. M3D is applied to a simple test problem involving an external kink mode in an ideal cylindrical plasma, used also by the Disruption Simulation Code (DSC) as a model case for illustrating the nature of transient vessel currents during a major disruption. While comparison of the results with those of the DSC is complicated by effects arising from the higher dimensionality and complexity of M3D, we verify that M3D is capable of reproducing both the correct saturation behavior of the free boundary kink and the “Hiro” currents arising when the kink interacts with a conducting tile surface interior to the ideal wall.
Classification and calculation of primary failure modes in bread production line
Energy Technology Data Exchange (ETDEWEB)
Tsarouhas, Panagiotis H. [Department of Standardization and Transportation of Products-Logistics, Alexander Technological Educational Institute of Thessaloniki, Agiou Dimitriou 93, 60100 Katerini, Hellas (Greece)], E-mail: ptsarouh@teilam.gr
2009-02-15
In this study, we describe the classification methodology over a 2-year period of the primary failure modes in categories based on failure data of bread production line. We estimate the probabilities of these categories applying the chi-square goodness of fit test, and we calculate their joint probabilities of mass function at workstation and line level. Then, we present numerical examples in order to predict the causes and frequencies of breakdowns for workstations and for the entire bread production line that will occur in the future. The methodology is meant to guide bread and bakery product manufacturers, improving the operation of the production lines. It can also be a useful tool to maintenance engineers, who wish to analyze and improve the reliability and efficiency of the manufacturing systems.
Transverse mode coupling instability in the SPS: Headtail simulation and moses calculation
Salvant, B; Rumolo, G; Tomás, R
2008-01-01
Since 2003, single bunches of protons with high intensity (~ 1.2 1011 protons) and low longitudinal emittance (~ 0.2 eVs) have been observed to suffer from heavy losses in less than one synchrotron period after injection at 26 GeV/c in the CERN Super Proton Synchrotron (SPS) when the vertical chromaticity is corrected (ξy ~ 0). Understanding the mechanisms underlying this instability is crucial to assess the feasibility of an anticipated upgrade of the SPS, which requires bunches of 4 1011 protons. Analytical calculations and particle tracking simulations had already agreed in predicting the intensity threshold of a fast instability. The aim of the present paper is to present a sensitive frequency analysis of the HEADTAIL simulations output using SUSSIX, which brought to light the fine structure of the mode spectrum of the bunch coherent motion. Coupling between the azimuthal modes “-2” and “-3” was clearly observed to be the reason for this fast instability.
Chuang, Kuo-Chih; Liou, Hong-Cin; Ma, Chien-Ching
2014-06-01
Compared with piezoelectric ceramics such as lead zirconate titanate (PZT) ceramics, the low density and high compliance of the PVDF films make them a more suitable choice in modal testing, especially for detecting high-frequency modes in flexible or inflatable structures. In this work, dynamic sensing performances of PVDF films for flexible structures in modal testing are examined, with considerations including the repeatability of the impact source, the accuracy of the sensing responses, and the influences of the nodal lines on the frequency spectra of the transient responses. Two flexible plates with different boundary conditions and thickness are considered. Experimental results, compared with FEM computations or theoretical predictions, demonstrate the excellent dynamic sensing performance of the PVDF film in modal testing applications, especially for identification of high-frequency modes on flexible structures.
Vibration suppression in flexible structures via the sliding-mode control approach
Drakunov, S.; Oezguener, Uemit
1994-01-01
Sliding mode control became very popular recently because it makes the closed loop system highly insensitive to external disturbances and parameter variations. Sliding algorithms for flexible structures have been used previously, but these were based on finite-dimensional models. An extension of this approach for differential-difference systems is obtained. That makes if possible to apply sliding-mode control algorithms to the variety of nondispersive flexible structures which can be described as differential-difference systems. The main idea of using this technique for dispersive structures is to reduce the order of the controlled part of the system by applying an integral transformation. We can say that transformation 'absorbs' the dispersive properties of the flexible structure as the controlled part becomes dispersive.
Nonlinear vibration analysis of axially moving strings based on gyroscopic modes decoupling
Yang, Xiao-Dong; Wu, Hang; Qian, Ying-Jing; Zhang, Wei; Lim, C. W.
2017-04-01
A novel idea that applies the multiple scale analysis to a discretized decoupled system of gyroscopic continua is introduced and an axial moving string is treated as an example. First, the invariant manifold method is applied to the discretized ordinary differential equations of the axially moving string. Complex gyroscopic mode functions that agree well with true analytical results are obtained. The gyroscopic modes are subsequently used for the discretized ordinary differential equations with gyroscopic and nonlinear coupling terms that yield a gyroscopically decoupled system. Further the method of multiple scales is used to obtain the equations at a slow scale. This novel procedure is compared to solutions obtained by directly applying the classical multiple scale analysis to the gyroscopically coupled system without decoupling. The modal decoupled system analysis yields better frequency with comparing to the classic method. The proposed methodology provides a novel alternative for nonlinear dynamic analysis of gyroscopic continua.
Analytical aspects of Randomdec analysis. [for vibration modes and nondestructive flaw detection
Reed, R. E.
1979-01-01
Relationships between Randomdec analysis and conventional methods of analysis such as Fourier and modal analysis are shown. The Randomdec signature is described in terms of the Fourier amplitude coefficients. Using this result, the effect of filtering the time history is shown. For a linear, two mode model, signatures are compared to the free response of the system subjected to different initial conditions to show the relationship of displacement and acceleration signatures to the physical system. Detection and location of flaws is also discussed.
Sun, Limin; Chen, Lin
2017-10-01
Residual mode correction is found crucial in calibrating linear resonant absorbers for flexible structures. The classic modal representation augmented with stiffness and inertia correction terms accounting for non-resonant modes improves the calibration accuracy and meanwhile avoids complex modal analysis of the full system. This paper explores the augmented modal representation in calibrating control devices with nonlinearity, by studying a taut cable attached with a general viscous damper and its Equivalent Dynamic Systems (EDSs), i.e. the augmented modal representations connected to the same damper. As nonlinearity is concerned, Frequency Response Functions (FRFs) of the EDSs are investigated in detail for parameter calibration, using the harmonic balance method in combination with numerical continuation. The FRFs of the EDSs and corresponding calibration results are then compared with those of the full system documented in the literature for varied structural modes, damper locations and nonlinearity. General agreement is found and in particular the EDS with both stiffness and inertia corrections (quasi-dynamic correction) performs best among available approximate methods. This indicates that the augmented modal representation although derived from linear cases is applicable to a relatively wide range of damper nonlinearity. Calibration of nonlinear devices by this means still requires numerical analysis while the efficiency is largely improved owing to the system order reduction.
Vibrational and electronic spectroscopic studies of melatonin
Singh, Gurpreet; Abbas, J. M.; Dogra, Sukh Dev; Sachdeva, Ritika; Rai, Bimal; Tripathi, S. K.; Prakash, Satya; Sathe, Vasant; Saini, G. S. S.
2014-01-01
We report the infrared absorption and Raman spectra of melatonin recorded with 488 and 632.8 nm excitations in 3600-2700 and 1700-70 cm-1 regions. Further, we optimized molecular structure of the three conformers of melatonin within density functional theory calculations. Vibrational frequencies of all three conformers have also been calculated. Observed vibrational bands have been assigned to different vibrational motions of the molecules on the basis of potential energy distribution calculations and calculated vibrational frequencies. Observed band positions match well with the calculated values after scaling except Nsbnd H stretching mode frequencies. It is found that the observed and calculated frequencies mismatch of Nsbnd H stretching is due to intermolecular interactions between melatonin molecules.
Kishor Kumar, J; Gunasekaran, S; Loganathan, S; Anand, G; Kumaresan, S
2013-11-01
Glycine is an important amino acid for building up protein synthesis. Single crystal of glycine dimer was grown from aqueous solution by slow evaporation method. Powder X-ray diffraction analysis confirms the crystalline nature of grown crystal. It is interesting to study the molecular structure of a dimer, having well-defined channels formed through amphoterism bonding between CO⋯H bonds with split-valence basis sets, and the conformer is mirror symmetrical, in which the protonated organic cation plays a significant role to have a dimer pattern. Amphiprotic molecules, like dimeric glycine which can either donate or accept a proton (H(+)) from each other. Optical absorption study reveals that the transparency of the crystal in the entire visible region and the cutoff wavelength was found to be 235nm. Powder SHG test and thermogravimetric analysis shows glycine dimer crystal is optically active and thermally stable. The molecular structure, geometry, stability and theoretical vibrational spectra were calculated for glycine as a monomer and as a dimer linked by the amphoterism hydrogen bonding. The theoretical studies were performed using the B3LYP density functional method with the 6-311G (d,p) basis set. The detailed interpretation of the vibrational spectra has been made on the basis of normal coordinate analysis. Copyright © 2013 Elsevier B.V. All rights reserved.
Theoretical calculations and vibrational potential energy surface of 4-silaspiro(3,3)heptane
Energy Technology Data Exchange (ETDEWEB)
Ocola, Esther J.; Medders, Cross; Laane, Jaan, E-mail: laane@mail.chem.tamu.edu [Department of Chemistry, Texas A and M University, College Station, Texas 77843-3255 (United States); Meinander, Niklas [Department of Military Technology, Finnish National Defence University, P.O. Box 7, 00861 Helsinki (Finland)
2014-04-28
Theoretical computations have been carried out on 4-silaspiro(3,3)heptane (SSH) in order to calculate its molecular structure and conformational energies. The molecule has two puckered four-membered rings with dihedral angles of 34.2° and a tilt angle of 9.4° between the two rings. Energy calculations were carried out for different conformations of SSH. These results allowed the generation of a two-dimensional ring-puckering potential energy surface (PES) of the form V = a(x{sub 1}{sup 4} + x{sub 2}{sup 4}) – b(x{sub 1}{sup 2} + x{sub 2}{sup 2}) + cx{sub 1}{sup 2}x{sub 2}{sup 2}, where x{sub 1} and x{sub 2} are the ring-puckering coordinates for the two rings. The presence of sufficiently high potential energy barriers prevents the molecule from undergoing pseudorotation. The quantum states, wave functions, and predicted spectra resulting from the PESs were calculated.
Oversampling in virtual visual sensors as a means to recover higher modes of vibration
Shariati, Ali; Schumacher, Thomas
2015-03-01
Vibration-based structural health monitoring (SHM) techniques require modal information from the monitored structure in order to estimate the location and severity of damage. Natural frequencies also provide useful information to calibrate finite element models. There are several types of physical sensors that can measure the response over a range of frequencies. For most of those sensors however, accessibility, limitation of measurement points, wiring, and high system cost represent major challenges. Recent optical sensing approaches offer advantages such as easy access to visible areas, distributed sensing capabilities, and comparatively inexpensive data recording while having no wiring issues. In this research we propose a novel methodology to measure natural frequencies of structures using digital video cameras based on virtual visual sensors (VVS). In our initial study where we worked with commercially available inexpensive digital video cameras we found that for multiple degrees of freedom systems it is difficult to detect all of the natural frequencies simultaneously due to low quantization resolution. In this study we show how oversampling enabled by the use of high-end high-frame-rate video cameras enable recovering all of the three natural frequencies from a three story lab-scale structure.
Spectral intensities in cubic systems. I. Progressions based upon parity vibrational modes
Energy Technology Data Exchange (ETDEWEB)
Acevedo, R.; Vasquez, S.O. [Department of Basic Chemistry, Faculty of Physical and Mathematical Sciences, University of Chile. Tupper 2069, Casilla 2777, Santiago, Chile (Chile); Meruane, T. [Department of Chemistry, Universidad Metropolitana de Ciencias de la Educacion. Av. J.P. Alessandri 774, Casilla 147, C. Santiago, Chile (Chile); Poblete, V. [Department of Nuclear Materials, Lo Aguirre, Comision Chilena de Energia Nuclear. Amunategui 95, Casilla 188-D, Santiago, Chile (Chile); Pozo, J. [Facultad de Ciencias de la Ingenieria. Universidad Diego Portales. Casilla 298-V, Santiago, Chile (Chile)
1998-12-01
The well-resolved emission and absorption spectra of centrosymmetric coordination compounds of the transition metal ions have been used widely to provide the experimental data against which to test theoretical models of vibronic intensities. With reference to the {sup 2} E{sub g} {yields} {sup 4} A{sub 2g} luminescence transition, at a perfect octahedral site in Cs{sub 2}SiF{sub 6}, over than one hundred vibronic lines are observed with line widths of a few wavenumber spread over some 3000 cm{sup -1}. This paper reports a through examination of both the electronic and vibrational factors, which influences the observed vibronic intensities of the various assigned and identified lines in the spectra of the MnF{sub 6} {sup 2-} complex ion in the Cs{sub 2}SiF{sub 6} cubic lattice. The origin and nature of higher order vibronic interactions are analysed on the basis of a symmetrized vibronic crystal field-ligand polarization model. (Author)
Yang, Yongchao; Dorn, Charles; Mancini, Tyler; Talken, Zachary; Kenyon, Garrett; Farrar, Charles; Mascareñas, David
2017-02-01
user supervision and calibration. First a multi-scale image processing method is applied on the frames of the video of a vibrating structure to extract the local pixel phases that encode local structural vibration, establishing a full-field spatiotemporal motion matrix. Then a high-spatial dimensional, yet low-modal-dimensional, over-complete model is used to represent the extracted full-field motion matrix using modal superposition, which is physically connected and manipulated by a family of unsupervised learning models and techniques, respectively. Thus, the proposed method is able to blindly extract modal frequencies, damping ratios, and full-field (as many points as the pixel number of the video frame) mode shapes from line of sight video measurements of the structure. The method is validated by laboratory experiments on a bench-scale building structure and a cantilever beam. Its ability for output (video measurements)-only identification and visualization of the weakly-excited mode is demonstrated and several issues with its implementation are discussed.
Wang, Yimin; Carter, Stuart; Braams, Bastiaan J.; Bowman, Joel M.
2008-02-01
We report vibrational configuration interaction calculations of the monomer fundamentals of (H2O)2, (D2O)2, (H2O)3, and (D2O)3 using the code MULTIMODE and full dimensional ab initio-based global potential energies surfaces (PESs). For the dimer the HBB PES [Huang et al., J. Chem. Phys 128, 034312 (2008)] is used and for the trimer a new PES, reported here, is used. The salient properties of the new trimer PES are presented and compared to previous single-point calculations and the vibrational energies are compared with experiments.
Faure, Géraldine
1997-01-01
This work deals with vibrational and rotational temperatures of molecules in thermal plasmas.This thesis had two main parts : the first is devoted to the molecular spectra calculation and the second part is devoted to the spectra comparison in four different experimental conditions.A code of calculation has been created to simulate spectra of diatomic molecules. It has been essentially applied on the radicals C2, CN, the molecule N2 and the molecular ion N2+ for variable parameter vibration a...
Control of input delayed pneumatic vibration isolation table using adaptive fuzzy sliding mode
Directory of Open Access Journals (Sweden)
Mostafa Khazaee
Full Text Available AbstractPneumatic isolators are promising candidates for increasing the quality of accurate instruments. For this purpose, higher performance of such isolators is a prerequisite. In particular, the time-delay due to the air transmission is an inherent issue with pneumatic systems, which needs to be overcome using modern control methods. In this paper an adaptive fuzzy sliding mode controller is proposed to improve the performance of a pneumatic isolator in the low frequency range, i.e., where the passive techniques have obvious shortcomings. The main idea is to combine the adaptive fuzzy controller with adaptive predictor as a new time delay control technique. The adaptive fuzzy sliding mode control and the adaptive fuzzy predictor help to circumvent the input delay and nonlinearities in such isolators. The main advantage of the proposed method is that the closed-loop system stability is guaranteed under certain conditions. Simulation results reveal the effectiveness of the proposed method, compared with other existing time -delay control methods.
Singh, R; Yadav, R A
2014-09-15
Raman and FTIR spectra of solid 2,4-Dithiouracil (DTU) at room temperature have been recorded. DFT calculations were carried out to compute the optimized molecular geometries, GAPT charges and fundamental vibrational frequencies along with their corresponding IR intensities, Raman activities and depolarization ratios of the Raman bands for the neutral DTU molecule and its cation (DTU+) and anion (DTU-) using the Gaussian-03 software. Addition of one electron leads to increase in the atomic charges on the sites N1 and N3 and decrease in the atomic charges on the sites S8 and S10. Due to ionization of DTU molecule, the charge at the site C6 decreases in the cationic and anionic radicals of DTU as compared to its neutral species. As a result of anionic radicalization, the C5C6 bond length increases and loses its double bond character while the C4C5 bond length decreases. In the case of the DTU+ ion the IR and Raman band corresponding to the out-of-phase coupled NH stretching mode is strongest amongst the three species. The anionic DTU radical is found to be the most stable. The two NH out-of-plane bending modes are found to originate due to out-of-phase and in-phase coupling of the two NH bonds in the anion and cation contrary to the case of the neutral DTU molecule in which the out-of-plane bending motions of the two NH bonds are not coupled. Copyright © 2014 Elsevier B.V. All rights reserved.
Korayem, Moharam Habibnejad; Nahavandi, Amir
2017-04-01
This paper investigates the vibration of a tapping-mode Atomic Force Microscope (AFM) cantilever covered with two whole piezoelectric layers in a liquid medium. The authors of this article have already modeled the vibration of a cantilever immersed in liquid over rough surfaces. Five new ideas have been considered for improving the results of the previous work. Mass and damping of a cantilever probe tip have been considered. Since the probe tip of an AFM cantilever has a mass, which can itself affect the natural frequency of vibration, the significance of this mass has been explored. Also, two hydrodynamic force models for analyzing the mass and damping added to a cantilever in liquid medium have been evaluated. In modeling the vibration of a cantilever in liquid, simplifications are made to the theoretical equations used in the modeling, which may make the obtained results different from those in the real case. So, two hydrodynamic force models are introduced and compared with each other. In addition to the already introduced DMT model, the JKR model has been proposed. The forces acting on a probe tip have attractive and repulsive effects. The attractive Van der Waals force can vary depending on the surface smoothness or roughness, and the repulsive contact force, which is independent of the type of surface roughness and usually varies with the hardness or softness of a surface. When the first mode is used in the vibration of an AFM cantilever, the changes of the existing physical parameters in the simulation do not usually produce a significant difference in the response. Thus, three cantilever vibration modes have been investigated. Finally, an analytical approach for obtaining the response of equations is presented which solves the resulting motion equation by the Laplace method and, thus, a time function is obtained for cantilever deflection is determined. Also, using the COMSOL software to model a cantilever in a liquid medium, the computed natural
Leclerc, Lara; Merhie, Amira El; Navarro, Laurent; Prévôt, Nathalie; Durand, Marc; Pourchez, Jérémie
2015-10-15
We investigated the impact of vibrating acoustic airflow, the high frequency (f≥100 Hz) and the low frequency (f≤45 Hz) sound waves, on the enhancement of intrasinus drug deposition. (81m)Kr-gas ventilation study was performed in a plastinated human cast with and without the addition of vibrating acoustic airflow. Similarly, intrasinus drug deposition in a nasal replica using gentamicin as a marker was studied with and without the superposition of different modes of acoustic airflow. Ventilation experiments demonstrate that no sinus ventilation was observed without acoustic airflow although sinus ventilation occurred whatever the modes of acoustic airflow applied. Intrasinus drug deposition experiments showed that the high frequency acoustic airflow led to 4-fold increase in gentamicin deposition into the left maxillary sinus and to 2-fold deposition increase into the right maxillary sinus. Besides, the low frequency acoustic airflow demonstrated a significant increase of 4-fold and 2-fold in the right and left maxillary sinuses, respectively. We demonstrated the benefit of different modes of vibrating acoustic airflow for maxillary sinus ventilation and intrasinus drug deposition. The degree of gentamicin deposition varies as a function of frequency of the vibrating acoustic airflow and the geometry of the ostia. Copyright © 2015 Elsevier B.V. All rights reserved.
Phu, Do Xuan; Choi, Seung-Bok
2015-02-01
In this work, a new high-load magnetorheological (MR) fluid mount system is devised and applied to control vibration in a ship engine. In the investigation of vibration-control performance, a new modified indirect fuzzy sliding mode controller is formulated and realized. The design of the proposed MR mount is based on the flow mode of MR fluid, and it includes two separated coils for generating a magnetic field. An optimization process is carried out to achieve maximal damping force under certain design constraints, such as the allowable height of the mount. As an actuating smart fluid, a new plate-like iron-particle-based MR fluid is used, instead of the conventional spherical iron-particle-based MR fluid. After evaluating the field-dependent yield stress of the MR fluid, the field-dependent damping force required to control unwanted vibration in the ship engine is determined. Subsequently, an appropriate-sized MR mount is manufactured and its damping characteristics are evaluated. After confirming the sufficient damping force level of the manufactured MR mount, a medium-sized ship engine mount system consisting of eight MR mounts is established, and its dynamic governing equations are derived. A new modified indirect fuzzy sliding mode controller is then formulated and applied to the engine mount system. The displacement and velocity responses show that the unwanted vibrations of the ship engine system can be effectively controlled in both the axial and radial directions by applying the proposed control methodology.
Yang, Yongchao; Dorn, Charles; Mancini, Tyler; Talken, Zachary; Nagarajaiah, Satish; Kenyon, Garrett; Farrar, Charles; Mascareñas, David
2017-03-01
Enhancing the spatial and temporal resolution of vibration measurements and modal analysis could significantly benefit dynamic modelling, analysis, and health monitoring of structures. For example, spatially high-density mode shapes are critical for accurate vibration-based damage localization. In experimental or operational modal analysis, higher (frequency) modes, which may be outside the frequency range of the measurement, contain local structural features that can improve damage localization as well as the construction and updating of the modal-based dynamic model of the structure. In general, the resolution of vibration measurements can be increased by enhanced hardware. Traditional vibration measurement sensors such as accelerometers have high-frequency sampling capacity; however, they are discrete point-wise sensors only providing sparse, low spatial sensing resolution measurements, while dense deployment to achieve high spatial resolution is expensive and results in the mass-loading effect and modification of structure's surface. Non-contact measurement methods such as scanning laser vibrometers provide high spatial and temporal resolution sensing capacity; however, they make measurements sequentially that requires considerable acquisition time. As an alternative non-contact method, digital video cameras are relatively low-cost, agile, and provide high spatial resolution, simultaneous, measurements. Combined with vision based algorithms (e.g., image correlation or template matching, optical flow, etc.), video camera based measurements have been successfully used for experimental and operational vibration measurement and subsequent modal analysis. However, the sampling frequency of most affordable digital cameras is limited to 30-60 Hz, while high-speed cameras for higher frequency vibration measurements are extremely costly. This work develops a computational algorithm capable of performing vibration measurement at a uniform sampling frequency lower than
Directory of Open Access Journals (Sweden)
Emílio Borges
2007-04-01
Full Text Available A simple method to obtain molecular Cartesian coordinates as a function of vibrational normal modes is presented in this work. The method does not require the definition of special matrices, like the F and G of Wilson, neither of group theory. The Eckart's conditions together with the diagonalization of kinetic and potential energy are the only required expressions. This makes the present approach appropriate to be used as a preliminary study for more advanced concepts concerning vibrational analysis. Examples are given for diatomic and triatomic molecules.
Hetmańczyk, Joanna; Hetmańczyk, Łukasz; Migdał-Mikuli, Anna; Mikuli, Edward
2015-02-05
The vibrational and reorientational motions of NH3 ligands and ClO4(-) anions were investigated by Fourier transform middle-infrared spectroscopy (FT-IR) in the high- and low-temperature phases of [Mn(NH3)6](ClO4)2. The temperature dependencies of full width at half maximum (FWHM) of the infrared bands at: 591 and 3385cm(-1), associated with: ρr(NH3) and νas(N-H) modes, respectively, indicate that there exist fast (correlation times τR≈10(-12)-10(-13)s) reorientational motions of NH3 ligands, with a mean values of activation energies: 7.8 and 4.5kJmol(-1), in the phase I and II, respectively. These reorientational motions of NH3 ligands are only slightly disturbed in the phase transition region and do not significantly contribute to the phase transition mechanism. Fourier transform far-infrared and middle-infrared spectra with decreasing of temperature indicated characteristic changes at the vicinity of PT at TC(c)=137.6K (on cooling), which suggested lowering of the crystal structure symmetry. Infrared spectra of [Mn(NH3)6](ClO4)2 were recorded and interpreted by comparison with respective theoretical spectra calculated using DFT method (B3LYP functional, LANL2DZ ECP basis set (on Mn atom) and 6-311+G(d,p) basis set (on H, N, Cl, O atoms) for the isolated equilibrium two models (Model 1 - separate isolated [Mn(NH3)6](2+) cation and ClO4(-) anion and Model 2 - [Mn(NH3)6(ClO4)2] complex system). Calculated optical spectra show a good agreement with the experimental infrared spectra (FT-FIR and FT-MIR) for the both models. Copyright © 2014 Elsevier B.V. All rights reserved.
Principal axes estimation using the vibration modes of physics-based deformable models.
Krinidis, Stelios; Chatzis, Vassilios
2008-06-01
This paper addresses the issue of accurate, effective, computationally efficient, fast, and fully automated 2-D object orientation and scaling factor estimation. The object orientation is calculated using object principal axes estimation. The approach relies on the object's frequency-based features. The frequency-based features used by the proposed technique are extracted by a 2-D physics-based deformable model that parameterizes the objects shape. The method was evaluated on synthetic and real images. The experimental results demonstrate the accuracy of the method, both in orientation and the scaling estimations.
A second, low-frequency mode of vibration in the intact mammalian cochlea
Lukashkin, Andrei N.; Russell, Ian J.
2003-03-01
The mammalian cochlea is a structure comprising a number of components connected by elastic elements. A mechanical system of this kind is expected to have multiple normal modes of oscillation and associated resonances. The guinea pig cochlear mechanics was probed using distortion components generated in the cochlea close to the place of overlap between two tones presented simultaneously. Otoacoustic emissions at frequencies of the distortion components were recorded in the ear canal. The phase behavior of the emissions reveals the presence of a nonlinear resonance at a frequency about a half octave below that of the high-frequency primary tone. The location of the resonance is level dependent and the resonance shifts to lower frequencies with increasing stimulus intensity. This resonance is thought to be associated with the tectorial membrane. The resonance tends to minimize input to the cochlear receptor cells at frequencies below the high-frequency primary and increases the dynamic load to the stereocilia of the receptor cells at the primary frequency when the tectorial membrane and reticular lamina move in counterphase.
TreeEFM: calculating elementary flux modes using linear optimization in a tree-based algorithm.
Pey, Jon; Villar, Juan A; Tobalina, Luis; Rezola, Alberto; García, José Manuel; Beasley, John E; Planes, Francisco J
2015-03-15
Elementary flux modes (EFMs) analysis constitutes a fundamental tool in systems biology. However, the efficient calculation of EFMs in genome-scale metabolic networks (GSMNs) is still a challenge. We present a novel algorithm that uses a linear programming-based tree search and efficiently enumerates a subset of EFMs in GSMNs. Our approach is compared with the EFMEvolver approach, demonstrating a significant improvement in computation time. We also validate the usefulness of our new approach by studying the acetate overflow metabolism in the Escherichia coli bacteria. To do so, we computed 1 million EFMs for each energetic amino acid and then analysed the relevance of each energetic amino acid based on gene/protein expression data and the obtained EFMs. We found good agreement between previous experiments and the conclusions reached using EFMs. Finally, we also analysed the performance of our approach when applied to large GSMNs. The stand-alone software TreeEFM is implemented in C++ and interacts with the open-source linear solver COIN-OR Linear program Solver (CLP). © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.
Huang, Yihua; Huang, Wenjin; Wang, Qinglei; Su, Xujian
2013-07-01
The equivalent circuit model of a piezoelectric transformer is useful in designing and optimizing the related driving circuits. Based on previous work, an equivalent circuit model for a circular flexural-vibration-mode piezoelectric transformer with moderate thickness is proposed and validated by finite element analysis. The input impedance, voltage gain, and efficiency of the transformer are determined through computation. The basic behaviors of the transformer are shown by numerical results.
Mackeprang, Kasper; Kjaergaard, Henrik G.
2017-04-01
The local mode perturbation theory (LMPT) model was developed to improve the description of hydrogen bonded XH-stretching transitions, where X is typically O or N. We present a modified version of the LMPT model to extend its application from hydrated bimolecular complexes to hydrogen bonded bimolecular complexes with donors such as alcohols, amines and acids. We have applied the modified model to a series of complexes of different hydrogen bond type and complex energy. We found that the differences between local mode (LM) and LMPT calculated fundamental XH-stretching transition wavenumbers and oscillator strengths were correlated with the strength of the hydrogen bond. Overall, we have found that the LMPT model in most cases predicts transition wavenumbers within 20 cm-1 of the experimental values.
Wang, Xiao Hu; Zheng, Chang Cheng; Ning, Ji Qiang
2016-01-01
Transition-metal dichalcogenides (TMDs) nanostructures including nanotubes and monolayers have attracted great interests in materials science, chemistry to condensed matter physics. We present an interesting study of the vibration modes in multi-walled tungsten sulfide (WS2) nanotubes prepared via sulfurizing tungsten oxide (WO3) nanowires which are investigated by confocal micro-Raman spectroscopy. The inter-layer vibration mode of WS2 nanotubes, A1g, is found to be sensitive to the diameter and curvature strain, while the in-plane vibration mode, E12g, is not. A1g mode frequency shows a redshift by 2.5 cm−1 for the multi-layered nanotubes with small outer-diameters, which is an outcome of the competition between the Van der Waals force stiffening and the curvature strain softening. We also show that the Raman peak intensity ratio is significantly different between the 1–2 wall layered nanotubes and monolayer flat sheets. PMID:27620879
Plasmonic modes of polygonal rods calculated using a quantum hydrodynamics method
Ding, Kun; Chan, C. T.
2017-09-01
Plasmonic resonances of nanoparticles have drawn lots of attention due to their interesting and useful properties such as strong field enhancements. The self-consistent hydrodynamics model has the advantage that it can incorporate the quantum effect of the electron gas into classical electrodynamics in a consistent way. We use the method to study the plasmonic response of polygonal rods under the influence of an external electromagnetic wave, and we pay particular attention to the size and shape of the particle and the effect of charging. We find that the particles support edge modes, face modes, and hybrid modes. The charges induced by the external field in the edge (face) modes mainly localize at the edges (faces), while the induced charges in the hybrid modes are distributed nearly evenly in both the edges and faces. The edge modes are less sensitive to particle size than the face modes but are sensitive to the corner angles of the edges. When the number of sides of regular polygons increases, the edge and face modes gradually change into the classical dipole plasmonic mode of a cylinder. The hybrid modes are found to be the precursor of the Bennett mode, which cannot be found in classical electrodynamics.
Vibrational spectra of nickel metalloporphyrins: An algebraic approach
Indian Academy of Sciences (India)
... molecules. In view of the considerable amount of experimental activity in this area, one needs theoretical models within which to interpret experimental data. Using Lie algebraic method, the vibrational energy levels of nickel metalloporphyrins like Ni(OEP), Ni porphyrin and Ni(TPP) are calculated for 16 vibrational modes.
Zimmermann, Jörg; Gundogdu, Kenan; Cremeens, Matthew E; Bandaria, Jigar N; Hwang, Gil Tae; Thielges, Megan C; Cheatum, Christopher M; Romesberg, Floyd E
2009-06-11
The spectral position of C-D stretching absorptions in the so-called "transparent window" of protein absorption (1800-2300 cm(-1)) makes them well suited as probes of protein dynamics with high temporal and structural resolution. We have previously incorporated single deuterated amino acids into proteins to site-selectively follow protein folding and ligand binding by steady-state FT IR spectroscopy. Ultimately, our goal is to use C-D bonds as probes in time-resolved IR spectroscopy to study dynamics and intramolecular vibrational energy redistribution (IVR) in proteins. As a step toward this goal, we now present the first time-resolved experiments characterizing the population and dephasing dynamics of selectively excited C-D bonds in a deuterated amino acid. Three differently deuterated, Boc-protected leucines were selected to systematically alter the number of additional C-D bonds that may mediate IVR out of the initially populated bright C-D stretching mode. Three-pulse photon echo experiments show that the steady-state C-D absorption linewidths are broadened by both homogeneous and inhomogeneous effects, and transient grating experiments reveal that IVR occurs on a subpicosecond time scale and is nonstatistical. The results have important implications for the interpretation of steady-state C-D spectra and demonstrate the potential utility of C-D bonds as probes of dynamics and IVR within a protein.
Xiao, Yuming; Koutmos, Markos; Case, David A; Coucouvanis, Dimitri; Wang, Hongxin; Cramer, Stephen P
2006-05-14
We have used four vibrational spectroscopies--FT-IR, FT-Raman, resonance Raman, and 57Fe nuclear resonance vibrational spectroscopy (NRVS)--to study the normal modes of the Fe-S cluster in [(n-Bu)4N]2[Fe4S4(SPh)4]. This [Fe4S4(SR)4]2- complex serves as a model for the clusters in 4Fe ferredoxins and high-potential iron proteins (HiPIPs). The IR spectra exhibited differences above and below the 243 K phase transition. Significant shifts with 36S substitution into the bridging S positions were also observed. The NRVS results were in good agreement with the low temperature data from the conventional spectroscopies. The NRVS spectra were interpreted by normal mode analysis using optimized Urey-Bradley force fields (UBFF) as well as from DFT theory. For the UBFF calculations, the parameters were refined by comparing calculated and observed NRVS frequencies and intensities. The frequency shifts after 36S substitution were used as an additional constraint. A D 2d symmetry Fe4S4S'4 model could explain most of the observed frequencies, but a better match to the observed intensities was obtained when the ligand aromatic rings were included for a D 2d Fe4S4(SPh)4 model. The best results were obtained using the low temperature structure without symmetry constraints. In addition to stretching and bending vibrations, low frequency modes between approximately 50 and 100 cm(-1) were observed. These modes, which have not been seen before, are interpreted as twisting motions with opposing sides of the cube rotating in opposite directions. In contrast with a recent paper on a related Fe4S4 cluster, we find no need to assign a large fraction of the low frequency NRVS intensity to 'rotational lattice modes'. We also reassign the 430 cm(-1) band as primarily an elongation of the thiophenolate ring, with approximately 10% terminal Fe-S stretch character. This study illustrates the benefits of combining NRVS with conventional Raman and IR analysis for characterization of Fe-S centers. DFT
Wanzenberg, R
2009-01-01
The trapped Higher Order Modes in the vacuum chamber of the CMS experiment at the LHC have been investigated using a geometrical model which closely reflects the presently (in 2008) installed vacuum chamber. The basic rf-parameters of the higher order modes (HOMs) including the frequency, loss parameter, G1 and the Q-value together with extensive graphical representations of the longitudinal electrical fields are provided. To also cover transient effects the short range wakefieds and the total loss parameter have been calculated, too. Most numerical calculations have been performed with the computer code MAFIA. The obtained data are intended to be include into the impedance database of the LHC.
Dral, Pavlo O.; Owens, Alec; Yurchenko, Sergei N.; Thiel, Walter
2017-06-01
We present an efficient approach for generating highly accurate molecular potential energy surfaces (PESs) using self-correcting, kernel ridge regression (KRR) based machine learning (ML). We introduce structure-based sampling to automatically assign nuclear configurations from a pre-defined grid to the training and prediction sets, respectively. Accurate high-level ab initio energies are required only for the points in the training set, while the energies for the remaining points are provided by the ML model with negligible computational cost. The proposed sampling procedure is shown to be superior to random sampling and also eliminates the need for training several ML models. Self-correcting machine learning has been implemented such that each additional layer corrects errors from the previous layer. The performance of our approach is demonstrated in a case study on a published high-level ab initio PES of methyl chloride with 44 819 points. The ML model is trained on sets of different sizes and then used to predict the energies for tens of thousands of nuclear configurations within seconds. The resulting datasets are utilized in variational calculations of the vibrational energy levels of CH3Cl. By using both structure-based sampling and self-correction, the size of the training set can be kept small (e.g., 10% of the points) without any significant loss of accuracy. In ab initio rovibrational spectroscopy, it is thus possible to reduce the number of computationally costly electronic structure calculations through structure-based sampling and self-correcting KRR-based machine learning by up to 90%.
Takayanagi, Toshiyuki
2017-11-08
We present the results of nonadiabatic quantum wave packet calculations to analyze the experimental transition state spectra for the I(2P3/2,1/2) + XI (X = H and D) hydrogen exchange reactions based on photodetachment of the IXI- anion. We developed (3 × 3) diabatic potential energy surfaces that can reasonably describe the nonadiabatic transitions induced by spin-orbit interactions. A good agreement was obtained between theory and experiment and it was found that nonadiabatic transitions play a role in the reaction dynamics. We also found that the calculated spectra showed very sharp resonance states with a vibrational bonding character, where the resonance wavefunctions are highly localized around the transition state region. Our calculated results suggest that one may experimentally detect these vibrational bonding resonances using time-domain transition state spectroscopy techniques since those states have picosecond-order lifetimes.
Bubin, Sergiy; Stanke, Monika; Adamowicz, Ludwik
2010-11-01
Very accurate variational calculations of the five lowest vibrational states of the 3He 4He + ion are carried out within a framework that does not assume the Born-Oppenheimer (BO) approximation, i.e., treating the two nuclei and three electrons forming the system on an equal footing. The non-BO wave functions are expanded in terms of one-center explicitly correlated Gaussian functions multiplied by even powers of the internuclear distance. The wave functions are used to calculate the leading relativistic corrections. The approach reproduces the experimental 3He 4He + fundamental transition within 0.055 cm -1 and similar accuracy is expected for the higher yet unmeasured vibrational transitions determined in the present calculations.
Schwenke, David W.
1992-01-01
The optimization of the wave functions is considered for coupled vibrations represented by linear combinations of products of functions depending only on a single vibrational coordinate. The functions themselves are optimized as well as configuration list. For the H2O molecule highly accurate results are obtained for the lowest 15 levels using significantly shorter expansions than would otherwise be possible.
Gaynor, James D.; Wetterer, Anna M.; Cochran, Rea M.; Valente, Edward J.; Mayer, Steven G.
2015-01-01
Raman spectroscopy is a powerful experimental technique, yet it is often missing from the undergraduate physical chemistry laboratory curriculum. Tetrachloromethane (CCl[subscript 4]) is the ideal molecule for an introductory vibrational spectroscopy experiment and the symmetric stretch vibration contains fine structure due to isotopic variations…
Languy, Fabian; Vandenrijt, Jean-François; Thizy, Cédric; Rochet, Jonathan; Loffet, Christophe; Simon, Daniel; Georges, Marc P.
2016-12-01
We present our investigations on two interferometric methods suitable for industrial conditions dedicated to the visualization of vibration modes of aeronautic blades. First, we consider long-wave infrared (LWIR) electronic speckle pattern interferometry (ESPI). The use of long wavelength allows measuring larger amplitudes of vibrations compared with what can be achieved with visible light. Also longer wavelengths allow lower sensitivity to external perturbations. Second, shearography at 532 nm is used as an alternative to LWIR ESPI. Both methods are used in time-averaged mode with the use of phase-stepping. This allows transforming Bessel fringes, typical to time averaging, into phase values that provide higher contrast and improve the visualization of vibration mode shapes. Laboratory experimental results with both techniques allowed comparison of techniques, leading to selection of shearography. Finally a vibration test on electrodynamic shaker is performed in an industrial environment and mode shapes are obtained with good quality by shearography.
Czech Academy of Sciences Publication Activity Database
Hreha, P.; Radvanská, A.; Knapčíková, L.; Krolczyk, G.; Legutko, S.; Królczyk, J. B.; Hloch, Sergej; Monka, P.
2015-01-01
Roč. 22, č. 2 (2015), s. 315-326 ISSN 0860-8229 R&D Projects: GA MŠk(CZ) LO1406; GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : abrasive water jet * surface topography * material vibration * vibration measurement Subject RIV: JQ - Machines ; Tools Impact factor: 1.140, year: 2015 http://www.metrology.pg.gda.pl/archives.html
Kalanoor, Basanth S; Ronen, Maria; Oren, Ziv; Gerber, Doron; Tischler, Yaakov R
2017-03-31
The low-frequency vibrational (LFV) modes of biomolecules reflect specific intramolecular and intermolecular thermally induced fluctuations that are driven by external perturbations, such as ligand binding, protein interaction, electron transfer, and enzymatic activity. Large efforts have been invested over the years to develop methods to access the LFV modes due to their importance in the studies of the mechanisms and biological functions of biomolecules. Here, we present a method to measure the LFV modes of biomolecules based on Raman spectroscopy that combines volume holographic filters with a single-stage spectrometer, to obtain high signal-to-noise-ratio spectra in short acquisition times. We show that this method enables LFV mode characterization of biomolecules even in a hydrated environment. The measured spectra exhibit distinct features originating from intra- and/or intermolecular collective motion and lattice modes. The observed modes are highly sensitive to the overall structure, size, long-range order, and configuration of the molecules, as well as to their environment. Thus, the LFV Raman spectrum acts as a fingerprint of the molecular structure and conformational state of a biomolecule. The comprehensive method we present here is widely applicable, thus enabling high-throughput study of LFV modes of biomolecules.
Bubin, Sergiy; Stanke, Monika; Adamowicz, Ludwik
2014-04-01
Very accurate variational calculations of the complete pure vibrational spectrum of the ditritium (T2) molecule are performed within the framework where the Born-Oppenheimer approximation is not assumed. After separating out the center-of-mass motion from the total laboratory-frame Hamiltonian, T2 becomes a three-particle problem. States corresponding to the zero total angular momentum, which are pure vibrational states, are spherically symmetric in this framework. The wave functions of these states are expanded in terms of all-particle, one-center, spherically symmetric explicitly correlated Gaussian functions multiplied by even non-negative powers of the internuclear distance. In the calculations the total energies, the dissociation energies, and expectation values of some operators dependent on interparticle distances are determined.
DEFF Research Database (Denmark)
Hansen, Bjarke Knud Vilster; Møller, Søren; Spanget-Larsen, Jens
2006-01-01
The title compound (DPB) was investigated by FTIR spectroscopy in liquid solutions and by FTIR linear dichroism (LD) measurements on samples aligned in stretched polyethylene. The LD data provided experimental assignments of molecular transition moment directions and vibrational symmetries for more...... of a nearly complete assignment of the IR active fundamentals of DPB, involving reassignment of a number of transitions. In addition, previously published Raman spectra of DPB were well predicted by the B3LYP/cc-pVTZ calculations....
Costa, Renyer A.; Oliveira, Kelson M. T.; Costa, Emmanoel Vilaça; Pinheiro, Maria L. B.
2017-10-01
A combined experimental and theoretical DFT study of the structural, vibrational and electronic properties of strychnobrasiline and 12-hydroxy-10,11-dimethoxystrychnobrasiline is presented using the Becke three-parameter Lee-Yang-Parr function (B3LYP) and 6-311G(2d,p) basis set. The theoretical geometry optimization data were compared with the X-ray data for a similar structure in the associated literature, showing close values. The calculated HOMO-LUMO gap values showed that the presence of substituents in the benzene ring influences the quantum properties which are directly related to the reactive properties. Theoretical UV spectra agreed well with the measured experimental data, with bands assigned. In addition, Natural Bond Orbitals (NBOs), Mapped molecular electrostatic potential surface (MEPS) and NLO calculations were also performed at the same theory level. The theoretical vibrational analysis revealed several characteristic vibrations that may be used as a diagnostic tool for other strychnobrasiline type alkaloids, simplifying their identification and structural characterization. Molecular docking calculations with DNA Topoisomerase II-DNA complex showed binding free energies values of -8.0 and -9.5 kcal/mol for strychnobrasiline and 12-hydroxy-10,11-dimethoxystrychnobrasiline respectively, while for amsacrine, used for the treatment of leukemia, the binding free energy ΔG presented a value of -10.0 kcal/mol, suggesting that strychnobrasiline derivative alkaloids might exhibit an antineoplastic activity.
Directory of Open Access Journals (Sweden)
I.P.Omelyan
2005-01-01
Full Text Available The transverse momentum time autocorrelation functions and wavevector- and frequency-dependent shear viscosity are calculated for an interaction site model of water using a modified collective mode approach and molecular dynamics simulations. The modified mode approach is based on a formulation which consistently takes into account non-Markovian effects into the kinetic memory kernels. As is demonstrated by comparing the theory results with the molecular dynamics data, the entire frequency dependence of the shear viscosity can be reproduced quantitatively over the whole wavelength range in terms of six generalized collective modes employing the kinetic memory kernel in the non-Markovian approximation of the third order. It is also shown that the results corresponding to the exact atomic and abbreviated molecular descriptions may differ considerably. In the infinite wavevector regime the dynamic correlations are completely determined by a single free motion of the molecules.
Calculation of asymptotic and RMS kicks due to higher order modes in the 3.9-GHz cavity
Energy Technology Data Exchange (ETDEWEB)
Bellantoni, L.; /Fermilab; Edwards, H.; /Fermilab /DESY; Wanzenberg, R.; /DESY
2008-03-01
FLASH plans to use a 'third harmonic' (3.9 GHz) superconducting cavity to compensate nonlinear distortions of the longitudinal phase space due to the sinusoidal curvature of the cavity voltage of the TESLA 1.3 GHz cavities. Higher order modes (HOMs) in the 3.9 GHz have a significant impact on the dynamics of the electron bunches in a long bunch train. Kicks due to dipole modes can be enhanced along the bunch train depending on the frequency and Q-value of the modes. The enhancement factor for a constant beam offset with respect to the cavity has been calculated. A simple Monte Carlo model of these effects, allowing for scatter in HOM frequencies due to manufacturing variances, has also been implemented and results for both FLASH and for an XFEL-like configuration are presented.
Suvitha, A.; Periandy, S.; Boomadevi, S.; Govindarajan, M.
2014-01-01
In this work, the vibrational spectral analysis is carried out by using Raman and infrared spectroscopy in the range 100-4000 cm-1and 50-4000 cm-1, respectively, for pycolinaldehyde oxime (PAO) (C6H6N2O) molecule. The vibrational frequencies have been calculated and scaled values are compared with experimental FT-IR and FT-Raman spectra. The structure optimizations and normal coordinate force field calculations are based on HF and B3LYP methods with 6-311++G(d,p) basis set. The results of the calculation shows excellent agreement between experimental and calculated frequencies in B3LYP/6-311++G(d,p) basis set. The optimized geometric parameters are compared with experimental values of PAO. The non linear optical properties, NBO analysis, thermodynamics properties and mulliken charges of the title molecule are also calculated and interpreted. A study on the electronic properties, such as HOMO and LUMO energies, are performed by time-dependent DFT (TD-DFT) approach. Besides, frontier molecular orbitals (FMO), molecular electrostatic potential (MEP) are performed. The effects due to the substitutions of CHdbnd NOH ring are investigated. The 1H and 13C nuclear magnetic resonance (NMR) chemical shifts of the molecule are calculated by the gauge independent atomic orbital (GIAO) method and compared with experimental results.
Tensor-decomposed vibrational coupled-cluster theory
DEFF Research Database (Denmark)
Madsen, Niels Kristian; Godtliebsen, Ian Heide; Christiansen, Ove
Vibrational coupled-cluster (VCC) theory is a highly accurate method for obtaining vibrational spectra and properties of small to medium-sized molecules. Calculating the vibrational energy and wave function requires the solution of a set of non-linear equations. We have implemented an array...... of any VCC calculation is the calculation of the error vector from a set of trial amplitudes. For high-order VCC methods this shows steep polynomial scaling w.r.t. the size of the moleule and the number of one-mode basis functions. Both the computational cost and the memory requirements of the VCC solver...
Directory of Open Access Journals (Sweden)
Chi Luo
2017-03-01
Full Text Available We study the dynamic behavior of a quartz crystal resonator (QCR in thickness-shear vibrations with the upper surface covered by an array of micro-beams (MBs under large deflection. Through taking into account the continuous conditions of shear force and bending moment at the interface of MBs/resonator, dependences of frequency shift of the compound QCR system versus material parameter and geometrical parameter are illustrated in detail for nonlinear and linear vibrations. It is found that the frequency shift produces a little right (left translation for increasing elastic modulus (length/radius ratio of MBs. Moreover, the frequency right (left translation distance caused by nonlinear deformation becomes more serious in the second-order mode than in the first-order one.
Bajaj, Pushp; Wang, Xiao-Gang; Carrington, Tucker; Paesani, Francesco
2018-03-01
Full-dimensional vibrational spectra are calculated for both X-(H2O) and X-(D2O) dimers (X = F, Cl, Br, I) at the quantum-mechanical level. The calculations are carried out on two sets of recently developed potential energy functions (PEFs), namely, Thole-type model energy (TTM-nrg) and many-body energy (MB-nrg), using the symmetry-adapted Lanczos algorithm with a product basis set including all six vibrational coordinates. Although both TTM-nrg and MB-nrg PEFs are derived from coupled-cluster single double triple-F12 data obtained in the complete basis set limit, they differ in how many-body effects are represented at short range. Specifically, while both models describe long-range interactions through the combination of two-body dispersion and many-body classical electrostatics, the relatively simple Born-Mayer functions employed in the TTM-nrg PEFs to represent short-range interactions are replaced in the MB-nrg PEFs by permutationally invariant polynomials to achieve chemical accuracy. For all dimers, the MB-nrg vibrational spectra are in close agreement with the available experimental data, correctly reproducing anharmonic and nuclear quantum effects. In contrast, the vibrational frequencies calculated with the TTM-nrg PEFs exhibit significant deviations from the experimental values. The comparison between the TTM-nrg and MB-nrg results thus reinforces the notion that an accurate representation of both short-range interactions associated with electron density overlap and long-range many-body electrostatic interactions is necessary for a correct description of hydration phenomena at the molecular level.
Vibrational spectrum of CF4 isotopes in an algebraic model
Indian Academy of Sciences (India)
n this paper the stretching vibrational modes of CF4 isotopes are calculated up to first overtone using the one-dimensional vibron model for the first time. The model Hamiltonian so constructed seems to describe the C–F stretching modes accurately using a relatively small set of well-defined parameters.
System Response Kernel Calculation for List-mode Reconstruction in Strip PET Detector
Białas, P; Strzelecki, A; Bednarski, T; Czerwiński, E; Kapłon, Ł; Kochanowski, A; Korcyl, G; Kowalski, P; Kozik, T; Krzemień, W; Molenda, M; Moskal, P; Niedźwiecki, Sz; Pałka, M; Pawlik, M; Raczyński, L; Rudy, Z; Salabura, P; Sharma, N G; Silarski, M; Słomski, A; Smyrski, J; Wiślicki, W; Zieliński, M
2013-01-01
Reconstruction of the image in Positron Emission Tomographs (PET) requires the knowledge of the system response kernel which describes the contribution of each pixel (voxel) to each tube of response (TOR). This is especially important in list-mode reconstruction systems, where an efficient analytical approximation of such function is required. In this contribution, we present a derivation of the system response kernel for a novel 2D strip PET.
First-principles method for high-$Q$ photonic crystal cavity mode calculations
Mahmoodian, Sahand; Poulton, Christopher G; Dossou, Kokou B; Botten, Lindsay C; McPhedran, Ross C; de Sterke, C Martijn
2012-01-01
We present a first-principles theory to compute radiation properties of ultra-high quality factor photonic crystal (PC) cavities using a basis of bound PC waveguide states. This method is used to compute the far-field radiation pattern and quality factor of cavity modes $\\sim 100$ times more rapidly than conventional finite-difference time domain methods. Our method provides a simple rule for engineering the PC cavity far-field radiation pattern in high $Q$ cavities.
Bubin, Sergiy; Stanke, Monika; Molski, Marcin; Adamowicz, Ludwik
2010-07-01
In this work we report very accurate variational calculations of the two lowest vibrational states of the D2 and T2 molecules within the framework that does not assume the Born-Oppenheimer approximation. The non-relativistic energies of the states obtained in the non-BO calculations are corrected for the relativistic effects of the order of α2 calculated as expectation values of the operators representing these effects. The v=0→1 transition energy of D2 obtained in the calculations is compared with the transition frequency obtained from the experimental spectra. The comparison shows the need to include corrections higher than second-order in α to further improve the agreement between the theory and the experiment.
Rosen, I. G.
1986-01-01
Rayleigh-Ritz methods for the approximation of the natural modes for a class of vibration problems involving flexible beams with tip bodies using subspaces of piecewise polynomial spline functions are developed. An abstract operator-theoretic formulation of the eigenvalue problem is derived and spectral properties investigated. The existing theory for spline-based Rayleigh-Ritz methods applied to elliptic differential operators and the approximation properties of interpolatory splines are used to argue convergence and establish rates of convergence. An example and numerical results are discussed.
Hong, Fan; Pang, Chee Khiang
2012-11-01
This paper presents an improved indirect-driven self-sensing actuation circuit for robust vibration control of piezoelectrically-actuated flexible structures in mechatronic systems. The circuit acts as a high-pass filter and provides better self-sensing strain signals with wider sensing bandwidth and higher signal-to-noise ratio. An adaptive non-model-based control is used to compensate for the structural vibrations using the strain signals from the circuit. The proposed scheme is implemented in a PZT-actuated suspension of a commercial dual-stage hard disk drive. Experimental results show improvements of 50% and 75% in the vibration suppression at 5.4kHz and 21kHz respectively, compared to the conventional PI control. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.
Energy Technology Data Exchange (ETDEWEB)
Hauer, Juergen; Buckup, Tiago [Fachbereich Chemie, Physikalische Chemie, Philipps-Universitaet Marburg, Hans-Meerwein-Strasse, D-35043 Marburg (Germany); Motzkus, Marcus [Fachbereich Chemie, Physikalische Chemie, Philipps-Universitaet Marburg, Hans-Meerwein-Strasse, D-35043 Marburg (Germany)], E-mail: motzkus@staff.uni-marburg.de
2008-06-23
Quantum control spectroscopy (QCS) is used as a tool to study, address selectively and enhance vibrational wavepacket motion in large solvated molecules. By contrasting the application of Fourier-limited and phase-modulated excitation on different electronic states, the interplay between the controllability of vibrational coherence and electronic resonance is revealed. We contrast control on electronic ground and excited state by introducing an additional pump beam prior to a DFWM-sequence (Pump-DFWM). Via phase modulation of this initial pump pulse, coherent control is extended to structural evolution on the vibrationally hot ground state (hot-S{sub 0}) and lowest lying excited state (S{sub 1}) of {beta}-carotene. In an open loop setup, the control scenarios for these different electronic states are compared in their effectiveness and mechanism.
Nonclassicality in two-mode BEC
Giri, Sandip Kumar; Sen, Biswajit; Ooi, C H Raymond; Pathak, Anirban
2013-01-01
The operator solution of a completely quantum mechanical Hamiltonian of the Raman processes is used here to investigate the possibility of obtaining intermodal entanglement between different modes involved in the Raman processes (e.g. pump mode, Stokes mode, vibration (phonon) mode and anti-Stokes mode). Intermodal entanglement is reported between a) pump mode and anti-Stokes mode, b) pump mode and vibration (phonon) mode c) Stokes mode and vibration phonon mode, d) Stokes mode and anti-stoke...
Energy Technology Data Exchange (ETDEWEB)
Zhao, Zhiqiang; Chen, Jun [State Key Laboratory of Molecular Reaction Dynamics and Center for Theoretical and Computational Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhang, Zhaojun, E-mail: zhangzhj@dicp.ac.cn; Zhang, Dong H., E-mail: zhangdh@dicp.ac.cn [State Key Laboratory of Molecular Reaction Dynamics and Center for Theoretical and Computational Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Lauvergnat, David, E-mail: David.Lauvergnat@u-psud.fr [CNRS, Laboratoire de Chimie Physique (UMR 8000), Université Paris-Sud, F-91405 Orsay (France); Gatti, Fabien, E-mail: gatti@univ-montp2.fr [CTMM, Institut Charles Gerhardt (UMR 5253), CC 1501, Université Montpellier, F-34095 Montpellier, Cedex 05 (France)
2016-05-28
Full quantum mechanical calculations of vibrational energies of methane and fluoromethane are carried out using a polyspherical description combining Radau and Jacobi coordinates. The Hamiltonian is built in a potential-optimized discrete variable representation, and vibrational energies are solved using an iterative eigensolver. This new approach can be applied to a large variety of molecules. In particular, we show that it is able to accurately and efficiently compute eigenstates for four different molecules : CH{sub 4}, CHD{sub 3}, CH{sub 2}D{sub 2}, and CH{sub 3}F. Very good agreement is obtained with the results reported previously in the literature with different approaches and with experimental data.
Yang, Yue; Gao, Hongwei
2012-04-01
Serotonin (5-hydroxytryptamine, 5-HT) is a monoamine neurotransmitter which plays an important role in treating acute or clinical stress. The comparative performance of different density functional theory (DFT) methods at various basis sets in predicting the molecular structure and vibration spectra of serotonin was reported. The calculation results of different methods including mPW1PW91, HCTH, SVWN, PBEPBE, B3PW91 and B3LYP with various basis sets including LANL2DZ, SDD, LANL2MB, 6-31G, 6-311++G and 6-311+G* were compared with the experimental data. It is remarkable that the SVWN/6-311++G and SVWN/6-311+G* levels afford the best quality to predict the structure of serotonin. The results also indicate that PBEPBE/LANL2DZ level show better performance in the vibration spectra prediction of serotonin than other DFT methods.
The calculation of active Raman modes of α-quartz crystal via ...
Indian Academy of Sciences (India)
2012-05-03
May 3, 2012 ... Abstract. We obtained an approximation of the force field of α-quartz crystal using a new idea of applying density functional theory [J Purton, R Jones, C R A Catlow and M Leslie, Phys. Chem. Minerals 19, 392 (1993)]. Our calculations were based on B3LYP Hamiltonian [A N Lazarev and. A P Mirgorodsky ...
Lattice Vibrations in Chlorobenzenes:
DEFF Research Database (Denmark)
Reynolds, P. A.; Kjems, Jørgen; White, J. W.
1974-01-01
Lattice vibrational dispersion curves for the ``intermolecular'' modes in the triclinic, one molecule per unit cell β phase of p‐C6D4Cl2 and p‐C6H4Cl2 have been obtained by inelastic neutron scattering. The deuterated sample was investigated at 295 and at 90°K and a linear extrapolation to 0°K...... was applied in order to correct for anharmonic effects. Calculations based on the atom‐atom model for van der Waals' interaction and on general potential parameters for the aromatic compounds agree reasonably well with the experimental observations. There is no substantial improvement in fit obtained either...
Dillman, Kevin L; Shelly, Katherine R; Beck, Warren F
2009-04-30
Ground-state coherent wavepacket motions arising from intermolecular modes with clustered, first-shell solvent molecules were observed using the femtosecond dynamic absorption technique in polar solutions of Zn(II) meso-tetrakis(N-methylpyridyl)porphyrin (ZnTMPyP) with excitation in the Soret absorption band. As was observed previously in bacteriochlorophyll a solution, the pump-probe transients in ZnTMPyP solutions are weakly modulated by slowly damped (effective damping time gamma > 1 ps) features that are assigned to intramolecular modes, the skeletal normal modes of vibration of the porphyrin. The 40 cm(-1) and 215 cm(-1) modes from the metal-doming and metal-solvent-ligand modes, respectively, are members of this set of modulation components. A slowly damped 2-4 cm(-1) component is assigned to the internal rotation of the N-methylpyridyl rings with respect to the porphyrin macrocycle; this mode obtains strong resonance Raman intensity enhancement from an extensive delocalization of pi-electron density from the porphyrin in the ground state onto the rings in the pi* excited states. The dominant features observed in the pump-probe transients are a pair of rapidly damped (gamma modes with solvent molecules. This structural assignment is supported by an isotope-dependent shift of the average mode frequencies in methanol and perdeuterated methanol. The solvent dependence of the mean intermolecular mode frequency is consistent with a van der Waals intermolecular potential that has significant contributions only from the London dispersion and induction interactions; ion-dipole or ion-induced-dipole terms do not make large contributions because the pi-electron density is not extensively delocalized onto the N-methylpyridyl rings. The modulation depth associated with the intermolecular modes exhibits a marked dependence on the electronic structure of the solvent that is probably related to the degree of covalency; the strongest modulations are observed in acetonitrile
Acoustical analysis of gear housing vibration
Seybert, A. F.; Wu, T. W.; Wu, X. F.; Oswald, Fred B.
1991-01-01
The modal and acoustical analysis of the NASA gear-noise rig is described. Experimental modal analysis techniques were used to determine the modes of vibration of the transmission housing. The resulting modal data were then used in a boundary element method (BEM) analysis to calculate the sound pressure and sound intensity on the surface of the housing as well as the radiation efficiency of each mode. The radiation efficiencies of the transmission housing modes are compared with theoretical results for finite, baffled plates. A method that uses the measured mode shapes and the BEM to predict the effect of simple structural changes on the sound radiation efficiency of the modes of vibration is also described.
Kvaternik, R. G.; Durling, B. J.
1978-01-01
The use of the SUDAN computer program for analyzing structural systems for their natural modes and frequencies of vibration is described. SUDAN is intended for structures which can be represented as an equivalent system of beam, spring, and rigid-body substructures. User-written constraint equations are used to analytically join the mass and stiffness matrices of the substructures to form the mass and stiffness matrices of the complete structure from which all the frequencies and modes of the system are determined. The SUDAN program can treat the case in which both the mass and stiffness matrices of the coupled system may be singular simultaneously. A general description of the FORTRAN IV program is given, the computer hardware and software specifications are indicated, and the input required by the program is described.
Full Article: Stoichiometry, Vibrational Modes and Structure of Molten Nb2O5-K2S2O7 Mixtures
DEFF Research Database (Denmark)
Boghosian, S.; Borup, F.; Berg, Rolf W.
1998-01-01
The dissolution reaction of Nb205 in pure molten K2S207 has been studied and high temperature Raman spectroscopy has been used for determining the vibrational and structural properties of the Nb(V) complex(es) formed according to the reaction Nb205 + n S207(2-) -> complex. By means of a recently ...
Bloem, Robbert; Dijkstra, Arend G.; Jansen, Thomas La Cour; Knoester, Jasper
2008-01-01
Population transfer between vibrational eigenstates is important for many phenomena in chemistry. In solution, this transfer is induced by fluctuations in molecular conformation as well as in the surrounding solvent. We develop a joint electrostatic density functional theory map that allows us to
Directory of Open Access Journals (Sweden)
Hreha Pavol
2015-06-01
Full Text Available The paper deals with a study of relations between the measured Ra, Rq, Rz surface roughness parameters, the traverse speed of cutting head v and the vibration parameters, PtP, RMS, vRa, generated during abrasive water jet cutting of the AISI 309 stainless steel. Equations for prediction of the surface roughness parameters were derived according to the vibration parameter and the traverse speed of cutting head. Accuracy of the equations is described according to the Euclidean distances. The results are suitable for an on-line control model simulating abrasive water jet cutting and machining using an accompanying physical phenomenon for the process control which eliminates intervention of the operator.
Hussein, M. F. M.; François, S.; Schevenels, M.; Hunt, H. E. M.; Talbot, J. P.; Degrande, G.
2014-12-01
This paper presents an extension of the Pipe-in-Pipe (PiP) model for calculating vibrations from underground railways that allows for the incorporation of a multi-layered half-space geometry. The model is based on the assumption that the tunnel displacement is not influenced by the existence of a free surface or ground layers. The displacement at the tunnel-soil interface is calculated using a model of a tunnel embedded in a full space with soil properties corresponding to the soil in contact with the tunnel. Next, a full space model is used to determine the equivalent loads that produce the same displacements at the tunnel-soil interface. The soil displacements are calculated by multiplying these equivalent loads by Green's functions for a layered half-space. The results and the computation time of the proposed model are compared with those of an alternative coupled finite element-boundary element model that accounts for a tunnel embedded in a multi-layered half-space. While the overall response of the multi-layered half-space is well predicted, spatial shifts in the interference patterns are observed that result from the superposition of direct waves and waves reflected on the free surface and layer interfaces. The proposed model is much faster and can be run on a personal computer with much less use of memory. Therefore, it is a promising design tool to predict vibration from underground tunnels and to assess the performance of vibration countermeasures in an early design stage.
Beegum, Shargina; Mary, Y. Sheena; Varghese, Hema Tresa; Panicker, C. Yohannan; Armaković, Stevan; Armaković, Sanja J.; Zitko, Jan; Dolezal, Martin; Van Alsenoy, C.
2017-03-01
Using density functional theory technique in the B3LYP approximation and cc-pVDZ (5D, 7F) basis set, the molecular structural parameters and vibrational wave numbers of two cyanopyrazine-2-carboxamide derivatives have been investigated. On the basis of potential energy distribution detailed vibrational assignments of observed FT-IR and FT-Raman bands have been proposed. Using molecular electrostatic potential map relative reactivities towards electrophilic and nucleophilic attack are predicted. The first and second hyperpolarizabilities are calculated and the first hyperpolarizability of the title compounds are greater than that of the standard NLO material urea. Molecular studies reveal that the predicted binding affinities of the best poses were -8.7 kcal/mol for BACPC, -9.0 kcal/mol for CBACPC, and -8.8 kcal/mol for the original inhibitor. Efforts were made in order to investigate local reactivity properties of title compounds as well. In order to do so we have calculated average local ionization energy (ALIE) surfaces, Fukui functions, bond dissociation energies (BDE) (within the framework of DFT calculations) and radial distribution functions (RDF) (within the molecular dynamics simulations). ALIE surfaces and Fukui functions gave us initial information on the site reactivity towards electrophilic and nucleophilic attacks. BDE indicated locations that might be prone to autoxidation mechanism, while RDF indicated which atoms of title molecules are having pronounced interactions with water.
Kang, Jaeyoung; Krousgrill, Charles M.; Sadeghi, Farshid
2009-07-01
The current study investigates the disc brake squeal by using an annular disc in contact with two pads subject to distributed friction stresses. The disc and pads are modeled as rotating annular and stationary annular sector plates, respectively. Friction stress is described on the deformed disc surface as distributed non-conservative friction-couples and frictional follower forces. From disc doublet-mode and multiple-mode models, the mode-coupling mechanism influenced by disc rotation is examined. In automotive applications, the frictional mode-coupling resulting from friction couple is shown to be the major mechanism for dynamic destabilization, whereas the effects of disc rotation on flutter destabilization are found to be small. On the verge of stop, however, the rotation effects effectively stabilize the steady sliding. This comprehensive brake model has shown that there is a speed corresponding to maximum squeal propensity for each flutter mode.
Eckhardt, Sabine; Cassiani, Massimo; Sollum, Espen; Evangeliou, Nikolaos; Stohl, Andreas
2017-04-01
Lagrangian particle dispersion models (LPDM) are popular tools to simulate the dispersion of trace gases, aerosols or radionuclides in the atmosphere LPDMs typically consider only linear processes, i.e., processes that do not depend on the concentration of the simulated tracer such as non-linear chemical reactions. This linearity means that they are self-adjoint, i.e., they can be run forward and backward in time without changes to the source code. The only difference between such simulations is the sign of the wind components used for transporting the particles. In the case where the number of (potential) source elements is larger than the number of receptors, running the model backward from the receptors is computationally more efficient than running it forward from the sources (if the number of receptors is smaller than the number of sources). To interpret the wet deposition of acidifying compounds or the contamination of snow by the albedo reducing BC, the s-r relationship of the deposited material would be very important to understand. To date, backward calculations for deposition quantities have not been possible. We present an extension of the LPDM FLEXPART that allows such calculations and test its performance for both dry and wet deposition. We show a comparison between model results in forward and backward mode as well as modeled vs. measured concentration of black carbon at high latitudes. Both analysis prove that the model approach is working well in backward mode and also gives a very good agreement with deposition measurements.
Mielke, Steven L; Truhlar, Donald G
2009-04-23
We present two enhancements to our methods for calculating vibrational-rotational free energies by Feynman path integrals, namely, a sequential sectioning scheme for efficiently generating random free-particle paths and a stratified sampling scheme that uses the energy of the path centroids. These improved methods are used with three interaction potentials to calculate equilibrium constants for the fractionation behavior of Cl(-) hydration in the presence of a gas-phase mixture of H(2)O, D(2)O, and HDO. Ion cyclotron resonance experiments indicate that the equilibrium constant, K(eq), for the reaction Cl(H(2)O)(-) + D(2)O right harpoon over left harpoon Cl(D(2)O)(-) + H(2)O is 0.76, whereas the three theoretical predictions are 0.946, 0.979, and 1.20. Similarly, the experimental K(eq) for the Cl(H(2)O)(-) + HDO right harpoon over left harpoon Cl(HDO)(-) + H(2)O reaction is 0.64 as compared to theoretical values of 0.972, 0.998, and 1.10. Although Cl(H(2)O)(-) has a large degree of anharmonicity, K(eq) values calculated with the harmonic oscillator rigid rotator (HORR) approximation agree with the accurate treatment to within better than 2% in all cases. Results of a variety of electronic structure calculations, including coupled cluster and multireference configuration interaction calculations, with either the HORR approximation or with anharmonicity estimated via second-order vibrational perturbation theory, all agree well with the equilibrium constants obtained from the analytical surfaces.
Voloshin, Igor; Karachevtsev, Victor; Zozulya, Victor
2013-01-01
Binding of acridine derivative quinacrine (QA) to chicken erythrocyte DNA was studied by methods of absorption and polarized fluorescent spectroscopy. Measurements were carried out in aqueous buffered solutions (pH 6.9) of different dye concentrations (QA concentration range from $10^{-6}$ till $10^{-4}$ M) and ionic strengths ($Na^{+}$ concentration rang from $10^{-3}$ till 0.15 M) in a wide range of phosphate-to-dye molar ratios ($P/D$). It is established that the minimum of fluorescent titration curve plotted as relative fluorescence intensity $vs$ $P/D$ is conditioned by the competition between the two types of QA binding to DNA which posses by different emission parameters: (i) intercalative one dominating under high $P/D$ values, and (ii) outside electrostatic binding dominating under low $P/D$ values, which is accompanied by the formation of non-fluorescent dye associates on the DNA backbone. Absorption and fluorescent characteristics of complexes formed were determined. The method of calculation of di...
Calculation of optimal modes for electric-contact welding of rails of mine haulage tracks
Shevchenko, R. A.; Kozyrev, N. A.; Usoltsev, A. A.; Kriukov, R. E.; Shishkin, P. E.
2017-09-01
The choice of thermal regime is based on the exclusion of formation of quenching structures (martensite and bainite), causing additional stresses and cracks which lead to the destruction of rails. After welded joint upset and cooling at the time of reaching the required temperature it is proposed to perform quasi-isothermal exposure by passing pulses of alternating current through the welded joint. The method for calculating the quasi-isothermal exposure is described that depends on the strength of the welding current and different rails section. It is suggested that after welding the rails during quenching, a quasi-isothermal holding is carried out in the temperature range of the formation of the fine-dispersed structure by passing pulses of alternating electric current through the welded joint maintaining this temperature until the end of the transformation. It is shown that the use of quasi-isothermal exposure at a chosen temperature of 600 - 650 °C makes it possible to obtain a finely dispersed structure of the welded seam of rails of mine haulage tracks without additional heat treatment.
DEFF Research Database (Denmark)
Dantan, Aurélien; Marler, Joan; Albert, Magnus
2010-01-01
We report on a novel noninvasive method to determine the normal mode frequencies of ion Coulomb crystals in traps based on the resonance enhanced collective coupling between the electronic states of the ions and an optical cavity field at the single photon level. Excitations of the normal modes...... are observed through a Doppler broadening of the resonance. An excellent agreement with the predictions of a zero-temperature uniformly charged liquid plasma model is found. The technique opens up for investigations of the heating and damping of cold plasma modes, as well as the coupling between them....
Sebastian, S.; Sylvestre, S.; Jayarajan, D.; Amalanathan, M.; Oudayakumar, K.; Gnanapoongothai, T.; Jayavarthanan, T.
2013-01-01
In this work, we report harmonic vibrational frequencies, molecular structure, NBO and HOMO, LUMO analysis of Umbelliferone also known as 7-hydroxycoumarin (7HC). The optimized geometric bond lengths and bond angles obtained by computation (monomer and dimmer) shows good agreement with experimental XRD data. Harmonic frequencies of 7HC were determined and analyzed by DFT utilizing 6-311+G(d,p) as basis set. The assignments of the vibrational spectra have been carried out with the help of Normal Coordinate Analysis (NCA) following the Scaled Quantum Mechanical Force Field Methodology (SQMFF). The change in electron density (ED) in the σ* and π* antibonding orbitals and stabilization energies E(2) have been calculated by Natural Bond Orbital (NBO) analysis to give clear evidence of stabilization originating in the hyperconjugation of hydrogen-bonded interaction. The energy and oscillator strength calculated by Time-Dependent Density Functional Theory (TD-DFT) complements with the experimental findings. The simulated spectra satisfactorily coincides with the experimental spectra. Microbial activity of studied compounds was tested against Staphylococcus aureus, Streptococcus pyogenes, Bacillus subtilis, Escherichia coli, Psuedomonas aeruginosa, Klebsiella pneumoniae, Proteus mirabilis, Shigella flexneri, Salmonella typhi and Enterococcus faecalis.
Mei, Chuh; Shen, Mo-How
1987-01-01
The use of NASTRAN model synthesis capability is illustrated. A classical truss problem is examined and the results are compared to results from other methods to test for accuracy. The problem is examined using both fixed interface modes and free interface modes. The solution is carried out for an applied dynamic load as far as recovery of forces in individual members as a function of time. Another small beam problem is used to compare different means of combining substructures.
Strenalyuk, Tatyana; Samdal, Svein; Volden, Hans Vidar
2008-05-29
The molecular structure of the trans isomer of metal-free phthalocyanine (H2Pc) is determined using the gas electron diffraction (GED) method and high-level quantum chemical calculations. B3LYP calculations employing the basis sets 6-31G**, 6-311++G**, and cc-pVTZ give two tautomeric isomers for the inner H atoms, a trans isomer having D2h symmetry and a cis isomer having C2v symmetry. The trans isomer is calculated to be 41.6 (B3LYP/6-311++G**, zero-point corrected) and 37.3 kJ/mol (B3LYP/cc-pVTZ, not zero-point corrected) more stable than the cis isomer. However, Hartree-Fock (HF) calculations using different basis sets predict that cis is preferred and that trans does not exist as a stable form of the molecule. The equilibrium composition in the gas phase at 471 degrees C (the temperature of the GED experiment) calculated at the B3LYP/6-311++G** level is 99.8% trans and 0.2% cis. This is in very good agreement with the GED data, which indicate that the mole fraction of the cis isomer is close to zero. The transition states for two mechanisms of the NH tautomerization have been characterized. A concerted mechanism where the two H atoms move simultaneously yields a transition state of D2h symmetry and an energy barrier of 95.8 kJ/mol. A two-step mechanism where a trans isomer is converted to a cis isomer, which is converted into another trans isomer, proceeds via two transition states of C(s) symmetry and an energy barrier of 64.2 kJ/mol according to the B3LYP/6-311++G** calculation. The molecular geometry determined from GED is in very good agreement with the geometry obtained from the quantum chemical calculations. Vibrational frequencies, IR, and Raman intensities have been calculated using B3LYP/6-311++G**. These calculations indicate that the molecule is rather flexible with six vibrational frequencies in the range of 20-84 cm(-1) for the trans isomer. The cis isomer might be detected by infrared matrix spectroscopy since the N-H stretching frequencies are
Shalaginova, Z. I.
2016-03-01
The mathematical model and calculation method of the thermal-hydraulic modes of heat points, based on the theory of hydraulic circuits, being developed at the Melentiev Energy Systems Institute are presented. The redundant circuit of the heat point was developed, in which all possible connecting circuits (CC) of the heat engineering equipment and the places of possible installation of control valve were inserted. It allows simulating the operating modes both at central heat points (CHP) and individual heat points (IHP). The configuration of the desired circuit is carried out automatically by removing the unnecessary links. The following circuits connecting the heating systems (HS) are considered: the dependent circuit (direct and through mixing elevator) and independent one (through the heater). The following connecting circuits of the load of hot water supply (HWS) were considered: open CC (direct water pumping from pipelines of heat networks) and a closed CC with connecting the HWS heaters on single-level (serial and parallel) and two-level (sequential and combined) circuits. The following connecting circuits of the ventilation systems (VS) were also considered: dependent circuit and independent one through a common heat exchanger with HS load. In the heat points, water temperature regulators for the hot water supply and ventilation and flow regulators for the heating system, as well as to the inlet as a whole, are possible. According to the accepted decomposition, the model of the heat point is an integral part of the overall heat-hydraulic model of the heat-supplying system having intermediate control stages (CHP and IHP), which allows to consider the operating modes of the heat networks of different levels connected with each other through CHP as well as connected through IHP of consumers with various connecting circuits of local systems of heat consumption: heating, ventilation and hot water supply. The model is implemented in the Angara data
Near-threshold vibrational excitation of acetylene by positron impact
de Oliveira, Eliane M.; Lima, Marco A. P.; Sanchez, Sergio D.'A.; Varella, Márcio T. Do N.
2010-01-01
We report vibrational excitation cross sections for C-C and C-H symmetric stretch modes of acetylene by positron impact. The contribution of these infrared inactive modes to the annihilation parameter is also addressed. The Feshbach projection operator approach was employed to vibrationally resolve e+-acetylene scattering phase shifts obtained with the Schwinger multichannel method. The present results point out a virtual state pole at the equilibrium geometry of acetylene that becomes a bound state as either bond is stretched, in qualitative agreement with previous calculations for small hydrocarbons. The vibrational couplings are stronger for the C-C mode, giving rise to a bound state pole within the Franck-Condon region of the vibrational ground state. These bound and virtual states give rise to sharp threshold structures (vibrational resonances) in both the vibrational excitation cross sections and the annihilation parameter (Zeff). We found fair agreement between the present calculations and previously reported e+-acetylene vibrational excitation cross sections.
Gascooke, Jason R; Lawrance, Warren D
2013-02-28
The methyl rotor and van der Waals vibrational levels in the S1 and S0 states of toluene-Ar have been investigated by the technique of two-dimensional laser induced fluorescence (2D-LIF). The S0 van der Waals and methyl rotor levels are reported for the first time, while improved S1 values are presented. The correlations seen in the 2D-LIF images between the S0 and S1 states lead to a reassignment of key features in the S1 ← S0 excitation spectrum. This reassignment reveals that there are significant changes in the methyl rotor levels in the complex compared with those in bare toluene, particularly at low m. The observed rotor energies are explained by the introduction of a three-fold, V3, term in the torsion potential (this term is zero in toluene) and a reduction in the height of the six-fold, V6, barriers in S0 and S1 from their values in bare toluene. The V3 term is larger in magnitude than the V6 term in both S0 and S1. The constants determined are ∣V3(S1)∣ = 33.4 ± 1.0 cm(-1), ∣V3(S0)∣ = 20.0 ± 1.0 cm(-1), V6(S1) = -10.7 ± 1.0 cm(-1), and V6(S0) = -1.7 ± 1.0 cm(-1). The methyl rotor is also found to couple with van der Waals vibration; specifically, the m(") = 2 rotor state couples with the combination level involving one quantum of the long axis bend and m(") = 1. The coupling constant is determined to be 1.9 cm(-1), which is small compared with the values typically reported for torsion-vibration coupling involving ring modes.
Gascooke, Jason R.; Lawrance, Warren D.
2013-02-01
The methyl rotor and van der Waals vibrational levels in the S1 and S0 states of toluene-Ar have been investigated by the technique of two-dimensional laser induced fluorescence (2D-LIF). The S0 van der Waals and methyl rotor levels are reported for the first time, while improved S1 values are presented. The correlations seen in the 2D-LIF images between the S0 and S1 states lead to a reassignment of key features in the S1 ← S0 excitation spectrum. This reassignment reveals that there are significant changes in the methyl rotor levels in the complex compared with those in bare toluene, particularly at low m. The observed rotor energies are explained by the introduction of a three-fold, V3, term in the torsion potential (this term is zero in toluene) and a reduction in the height of the six-fold, V6, barriers in S0 and S1 from their values in bare toluene. The V3 term is larger in magnitude than the V6 term in both S0 and S1. The constants determined are |V3(S1)| = 33.4 ± 1.0 cm-1, |V3(S0)| = 20.0 ± 1.0 cm-1, V6(S1) = -10.7 ± 1.0 cm-1, and V6(S0) = -1.7 ± 1.0 cm-1. The methyl rotor is also found to couple with van der Waals vibration; specifically, the m″ = 2 rotor state couples with the combination level involving one quantum of the long axis bend and m″ = 1. The coupling constant is determined to be 1.9 cm-1, which is small compared with the values typically reported for torsion-vibration coupling involving ring modes.
Fu, Li; Wang, Zhuguang; Yan, Elsa C Y
2014-09-01
We present a detailed analysis of the molecular origin of the chiral sum frequency generation (SFG) signals of proteins and peptides at interfaces in the N-H stretching vibrational region. The N-H stretching can be a probe for investigating structural and functional properties of proteins, but remains technically difficult to analyze due to the overlapping with the O-H stretching of water molecules. Chiral SFG spectroscopy offers unique tools to study the N-H stretching from proteins at interfaces without interference from the water background. However, the molecular origin of the N-H stretching signals of proteins is still unclear. This work provides a justification of the origin of chiral N-H signals by analyzing the vibrational frequencies, examining chiral SFG theory, studying proton (hydrogen/deuterium) exchange kinetics, and performing optical control experiments. The results demonstrate that the chiral N-H stretching signals at ~3300 cm(-1) originate from the amide group of the protein backbones. This chiral N-H stretching signal offers an in situ, real-time, and background-free probe for interrogating the protein structures and dynamics at interfaces at the molecular level. © 2014 Wiley Periodicals, Inc.
Energy Technology Data Exchange (ETDEWEB)
Zhang, Gaigong [Computational Research Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Lin, Lin, E-mail: linlin@math.berkeley.edu [Department of Mathematics, University of California, Berkeley, Berkeley, CA 94720 (United States); Computational Research Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Hu, Wei, E-mail: whu@lbl.gov [Computational Research Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Yang, Chao, E-mail: cyang@lbl.gov [Computational Research Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Pask, John E., E-mail: pask1@llnl.gov [Physics Division, Lawrence Livermore National Laboratory, Livermore, CA 94550 (United States)
2017-04-15
Recently, we have proposed the adaptive local basis set for electronic structure calculations based on Kohn–Sham density functional theory in a pseudopotential framework. The adaptive local basis set is efficient and systematically improvable for total energy calculations. In this paper, we present the calculation of atomic forces, which can be used for a range of applications such as geometry optimization and molecular dynamics simulation. We demonstrate that, under mild assumptions, the computation of atomic forces can scale nearly linearly with the number of atoms in the system using the adaptive local basis set. We quantify the accuracy of the Hellmann–Feynman forces for a range of physical systems, benchmarked against converged planewave calculations, and find that the adaptive local basis set is efficient for both force and energy calculations, requiring at most a few tens of basis functions per atom to attain accuracies required in practice. Since the adaptive local basis set has implicit dependence on atomic positions, Pulay forces are in general nonzero. However, we find that the Pulay force is numerically small and systematically decreasing with increasing basis completeness, so that the Hellmann–Feynman force is sufficient for basis sizes of a few tens of basis functions per atom. We verify the accuracy of the computed forces in static calculations of quasi-1D and 3D disordered Si systems, vibration calculation of a quasi-1D Si system, and molecular dynamics calculations of H{sub 2} and liquid Al–Si alloy systems, where we show systematic convergence to benchmark planewave results and results from the literature.
Zhang, Gaigong; Lin, Lin; Hu, Wei; Yang, Chao; Pask, John E.
2017-04-01
Recently, we have proposed the adaptive local basis set for electronic structure calculations based on Kohn-Sham density functional theory in a pseudopotential framework. The adaptive local basis set is efficient and systematically improvable for total energy calculations. In this paper, we present the calculation of atomic forces, which can be used for a range of applications such as geometry optimization and molecular dynamics simulation. We demonstrate that, under mild assumptions, the computation of atomic forces can scale nearly linearly with the number of atoms in the system using the adaptive local basis set. We quantify the accuracy of the Hellmann-Feynman forces for a range of physical systems, benchmarked against converged planewave calculations, and find that the adaptive local basis set is efficient for both force and energy calculations, requiring at most a few tens of basis functions per atom to attain accuracies required in practice. Since the adaptive local basis set has implicit dependence on atomic positions, Pulay forces are in general nonzero. However, we find that the Pulay force is numerically small and systematically decreasing with increasing basis completeness, so that the Hellmann-Feynman force is sufficient for basis sizes of a few tens of basis functions per atom. We verify the accuracy of the computed forces in static calculations of quasi-1D and 3D disordered Si systems, vibration calculation of a quasi-1D Si system, and molecular dynamics calculations of H2 and liquid Al-Si alloy systems, where we show systematic convergence to benchmark planewave results and results from the literature.
Fu, Hungshin; Qian, Jun; Green, Richard J.; Anderson, Scott L.
1998-02-01
We report a study of vibrational mode effects and differential scattering in reaction of NH3+ with CD3OD, CD3OH, and CH3OD over the collision energy range from 0.1 to 5 eV. At low collision energies, abstraction of both methyl and hydroxyl D atoms is observed with roughly equal probability, even though methyl D-abstraction should be favored on both energetic and statistical grounds. Branching between the two abstraction reactions is controlled by two different hydrogen-bonded complexes. Formation of these complexes is enhanced by NH3+ umbrella bending, unaffected by the NH3+ symmetric stretch, and inhibited by collision energy. Endoergic proton transfer is mediated at low energies by a third hydrogen-bonded complex, formation of which is enhanced by both umbrella bending and the symmetric stretch. Charge transfer (CT) has a significant cross section only when the NH3+ umbrella bend excitation exceeds the endoergicity. Collision energy and symmetric stretching appear to have no effect on CT. At high collision energies all reactions become direct, with near spectator stripping dynamics. In this energy range product branching appears to be controlled by collision geometry and there are no significant vibrational effects.
Directory of Open Access Journals (Sweden)
Sy Dung Nguyen
2017-01-01
Full Text Available This work proposes a novel adaptive type 2 fuzzy sliding controller (AT2FC for vibration control of magnetorheological damper- (MRD- based railway suspensions subjected to uncertainty and disturbance (UAD. The AT2FC is constituted of four main parts. The first one is a sliding mode controller (SMC for specifying the main damping force supporting the suspension. This controller is designed via Lyapunov stability theory. The second one is an interpolation model based on an interval type 2 fuzzy logic system for determination of optimal parameters of the SMC. The third one is a nonlinear UAD observer to compensate for external disturbances. The fourth one is an inverse MRD model (T2F-I-MRD for specifying the input current. In the operating process, an adaptively optimal structure deriving from the SMC is created (called the Ad-op-SMC to adapt to the real status. Working as an actuator, the input current for MRD is then determined by the T2F-I-MRD to generate the required damping force which is estimated by the Ad-op-SMC and the nonlinear observer. It is shown that the obtained survey results reflect the AT2FC’s excellent vibration control performance compared with the other controllers.
Wanzenberg, R
2013-01-01
A design study for a High Luminosity Large Hadron Collider (HL-LHC) was started to extend the discovery potential of the Large Hadron Collider (LHC). The HL-LHC study implies also an upgraded configuration of the ATLAS detector with a new beam pipe. The trapped Higher Order Modes (HOMs) and the short range wakefields for the new design of the vacuum chamber are calculated using the computer codes MAFIA and ECHO2D. The short range wakefields are characterized in terms of kick and loss parameters. For the HOMs the frequency the R/Q and the Q-values are given which can directly converted into impedance data. The obtained data are intended to be included into the impedance database of the HL-LHC.
Morzyk-Ociepa, Barbara; Szmigiel, Ksenia; Petrus, Rafał; Turowska-Tyrk, Ilona; Michalska, Danuta
2017-09-01
A novel two-dimensional coordination polymer, catena-poly[(μ2-7-azaindole-3-carboxylato-O:N)-di-aqua-sodium], [Na(7AI3CAH)(H2O)2]n has been synthesized and investigated by a single crystal X-ray diffraction, vibrational spectroscopy and DFT calculations. The sodium complex crystallizes in the triclinic system, space group Pī with a = 7.2226 (4), b = 7.4342 (7), c = 8.8428 (8) Å, α = 103.568 (8), β = 93.425 (6), γ = 91.233 (6)°, V = 460.42 (7) A3 and Z = 2. The asymmetric unit contains two crystallographically independent, half occupied sodium cations surrounded by one 7AI3CAH anion and two water molecules. The O-deprotonated 7-azaindole-3-carboxylate ligand (7AI3CAH) bridges the adjacent Na ions via one oxygen atom of the carboxylate group and via the pyridine nitrogen atom of the 7-azaindole group, which is quite unusual. The sodium cations are six-coordinated in a distorted octahedral geometry, where two apical positions are occupied by two water molecules. Extensive intermolecular Nsbnd H⋯O and Osbnd H⋯O hydrogen bonds stabilize the crystal structure of the complex. The infrared and Raman spectra of [Na(7AI3CAH)(H2O)2]n were recorded in the solid state. The theoretical wavenumbers, infrared intensities, Raman scattering activities and Raman intensities were calculated at the B3LYP/6-311++G(d,p) level for a theoretical model of the title compound including an inter ligand Nsbnd H⋯O(aqua) interaction. A detailed vibrational assignment has been made on the basis of the calculated potential energy distribution.
Vibration of imperfect rotating disk
Directory of Open Access Journals (Sweden)
Půst L.
2011-12-01
Full Text Available This study is concerned with the theoretical and numerical calculations of the flexural vibrations of a bladed disk. The main focus of this study is to elaborate the basic background for diagnostic and identification methods for ascertaining the main properties of the real structure or an experimental model of turbine disks. The reduction of undesirable vibrations of blades is proposed by using damping heads, which on the experimental model of turbine disk are applied only on a limited number of blades. This partial setting of damping heads introduces imperfection in mass, stiffness and damping distribution on the periphery and leads to more complicated dynamic properties than those of a perfect disk. Calculation of FEM model and analytic—numerical solution of disk behaviour in the limited (two modes frequency range shows the splitting of resonance with an increasing speed of disk rotation. The spectrum of resonance is twice denser than that of a perfect disk.
Lynch, Vanessa Audette; Mielke, Steven L; Truhlar, Donald G
2004-09-15
Accurate quantum mechanical partition functions and absolute free energies of H(2)O(2) are determined using a realistic potential energy surface [J. Koput, S. Carter, and N. C. Handy, J. Phys. Chem. A 102, 6325 (1998)] for temperatures ranging from 300 to 2,400 K by using Monte Carlo path integral calculations with new, efficient polyatomic importance sampling methods. The path centroids are sampled in Jacobi coordinates via a set of independent ziggurat schemes. The calculations employed enhanced-same-path extrapolation of trapezoidal Trotter Fourier path integrals, and the paths were constructed using fast Fourier sine transforms. Importance sampling was also used in Fourier coefficient space, and adaptively optimized stratified sampling was used in configuration space. The free energy values obtained from the path-integral calculations are compared to separable-mode approximations, to the Pitzer-Gwinn approximation, and to values in thermodynamic tables. Our calculations support the recently proposed revisions to the JANAF tables.
Ritchie, Andrew W; Webb, Lauren J
2015-11-05
Biological function emerges in large part from the interactions of biomacromolecules in the complex and dynamic environment of the living cell. For this reason, macromolecular interactions in biological systems are now a major focus of interest throughout the biochemical and biophysical communities. The affinity and specificity of macromolecular interactions are the result of both structural and electrostatic factors. Significant advances have been made in characterizing structural features of stable protein-protein interfaces through the techniques of modern structural biology, but much less is understood about how electrostatic factors promote and stabilize specific functional macromolecular interactions over all possible choices presented to a given molecule in a crowded environment. In this Feature Article, we describe how vibrational Stark effect (VSE) spectroscopy is being applied to measure electrostatic fields at protein-protein interfaces, focusing on measurements of guanosine triphosphate (GTP)-binding proteins of the Ras superfamily binding with structurally related but functionally distinct downstream effector proteins. In VSE spectroscopy, spectral shifts of a probe oscillator's energy are related directly to that probe's local electrostatic environment. By performing this experiment repeatedly throughout a protein-protein interface, an experimental map of measured electrostatic fields generated at that interface is determined. These data can be used to rationalize selective binding of similarly structured proteins in both in vitro and in vivo environments. Furthermore, these data can be used to compare to computational predictions of electrostatic fields to explore the level of simulation detail that is necessary to accurately predict our experimental findings.
Liu, Sheng; Dai, Wenshuai; Zhang, Lijuan; Cheng, Min; Du, Yikui; Zhu, Qihe
2017-10-01
Theoretical calculations predicted that there are only two stable conformers, trans and cis, for 2-fluoro-N-methylaniline (2FNMA) in the S0, S1 and D0 states. Compared to the cis conformer, the trans one is more stable, and has a population more than 99% at room temperature. The optimized molecular skeleton of trans and cis 2FNMA are both non-planar in the S0 state, but planar in the S1 and D0 states. The one-dimensional potential energy surface of 2FNMA in the S0 state is obtained. The Resonance-enhanced two-photon ionization (R2PI) and Mass-analyzed threshold ionization (MATI) spectra of trans 2FNMA are obtained. The first electronic excitation energy (E1) and the adiabatic ionization energy (IE) of trans 2FNMA are determined. The substitution effect on the molecular structures, transition energies and vibrations of 2FNMA are discussed.
Wang, Shaofeng; Ma, Xu; Zhang, Guoqing; Jia, Yongfeng; Hatada, Keisuke
2016-11-15
Hydrous ferric arsenate (HFA) is an important arsenic-bearing precipitate in the mining-impacted environment and hydrometallurgical tailings. However, there is no agreement on its local atomic structure. The local structure of HFA was reprobed by employing a full-potential multiple scattering (FPMS) analysis, density functional theory (DFT) calculations, and vibrational spectroscopy. The FPMS simulations indicated that the coordination number of the As-Fe, Fe-As, or both in HFA was approximately two. The DFT calculations constructed a structure of HFA with the formula of Fe(HAsO4)x(H2AsO4)1-x(OH)y·zH2O. The presence of protonated arsenate in HFA was also evidenced by vibrational spectroscopy. The As and Fe K-edge X-ray absorption near-edge structure spectra of HFA were accurately reproduced by FPMS simulations using the chain structure, which was also a reasonable model for extended X-Ray absorption fine structure fitting. The FPMS refinements indicated that the interatomic Fe-Fe distance was approximately 5.2 Å, consistent with that obtained by Mikutta et al. (Environ. Sci. Technol. 2013, 47 (7), 3122-3131) using wavelet analysis. All of the results suggested that HFA was more likely to occur as a chain with AsO4 tetrahedra and FeO6 octahedra connecting alternately in an isolated bidentate-type fashion. This finding is of significance for understanding the fate of arsenic and the formation of ferric arsenate minerals in an acidic environment.
Coutinho, S. S.; Tavares, M. S.; Barboza, C. A.; Frazão, N. F.; Moreira, E.; Azevedo, David L.
2017-12-01
We report the results of a theoretical study on the behavior of the structural, optoelectronic, vibrational, including infrared and Raman theoretical spectra, phonon spectrum, and thermodynamic properties of 3R- and 2H- polytypes of molybdenum disulfide (MoS2) using density functional theory (DFT) considering both the local density and generalized gradient approximation, LDA and GGA, respectively. Calculated lattice parameters are close to the experimental measurements, and an indirect band gap E(A →KΓ) = 1.33 eV (0.68 eV) was obtained within the GGA (LDA) level of calculation, considering the 3R-polytype, and for the 2H- polytype an indirect band gap E(Γ → KΓ) = 1.30 eV (0.70 eV) was obtained within the GGA (LDA) approximation. The complex dielectric function and absorption of 3R-MoS2 and 2H-MoS2 polytypes were shown to be sensitive to the plane of polarization of the incident light. The phonon dispersion relation together with density of states (DOS) as well as theoretical peaks of the infrared (IR) and Raman spectra in the frequency range of 0-800 cm-1 was analyzed and assigned, considering the norm-conserved pseudopotentials. The thermodynamic potentials, the specific heat at constant volume and Debye temperature of the 3R-MoS2 and 2H-MoS2 polytypes are also calculated, whose dependence on the temperature are discussed.
Anand, S.; Sundararajan, R. S.; Ramachandraraja, C.; Ramalingam, S.; Durga, R.
2015-03-01
In the present research work, the FT-IR, FT-Raman spectra of the Bis(thiourea) Nickel chloride (BTNC) were recorded and analyzed. The observed fundamental frequencies in finger print and functional group regions were assigned according to their uniqueness region. The computational calculations were carried out by HF and DFT (B3LYP and B3PW91) methods with 6-31++G(d,p) and 6-311++G(d,p) basis sets and the corresponding results were tabulated. The present organo-metallic compound was made up of covalent and coordination covalent bonds. The modified vibrational pattern of the complex molecule associated with ligand group was analyzed. Furthermore, the 13C NMR and 1H NMR spectral data were calculated by using the gauge independent atomic orbital (GIAO) method with B3LYP/6-311++G(d,p) basis set and their spectra were simulated and the chemical shifts linked to TMS were compared. A investigation on the electronic and optical properties; absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies were carried out. The kubo gap of the present compound was calculated related to HOMO and LUMO energies which confirm the occurring of charge transformation between the base and ligand. Besides frontier molecular orbitals (FMO), molecular electrostatic potential (MEP) was performed. The NLO properties related to Polarizability and hyperpolarizability based on the finite-field approach were also discussed.
Powell, B J; Bernstein, N; Brake, K; McKenzie, Ross H; Meredith, P; Pederson, M R
2016-01-01
We report first principles density functional calculations for hydroquinone (HQ), indolequinone (IQ) and semiquinone (SQ). These molecules are believed to be the basic building blocks of the eumelanins, a class of bio-macromolecules with important biological functions (including photoprotection) and with potential for certain bioengineering applications. We have used the DeltaSCF (difference of self consistent fields) method to study the energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), Delta_HL. We show that Delta_HL is similar in IQ and SQ but approximately twice as large in HQ. This may have important implications for our understanding of the observed broad band optical absorption of the eumelanins. The possibility of using this difference in Delta_HL to molecularly engineer the electronic properties of eumelanins is discussed. We calculate the infrared and Raman spectra of the three redox forms from first principles. Each of the molecules ...
Translational vibrations between chains of hydrogen-bonded molecules in solid-state aspirin form I
Takahashi, Masae; Ishikawa, Yoichi
2013-06-01
We perform dispersion-corrected first-principles calculations, and far-infrared (terahertz) spectroscopic experiments at 4 K, to examine translational vibrations between chains of hydrogen-bonded molecules in solid-state aspirin form I. The calculated frequencies and relative intensities reproduce the observed spectrum to accuracy of 11 cm-1 or less. The stronger one of the two peaks assigned to the translational mode includes the stretching vibration of the weak hydrogen bond between the acetyl groups of a neighboring one-dimensional chain. The calculation of aspirin form II performed for comparison gives the stretching vibration of the weak hydrogen bond in one-dimensional chain.
Zenkov, S. A.
2017-10-01
The article describes the method of defining rational parameters for excavator buckets vibrating devices in order to reduce soil adhesion under various operating conditions. The method includes limits formation, calculating geometric parameters of curved mold concentrator for excavator buckets with magnetostriction vibration exciters; calculating parameters of acoustic influence equipment; calculating power demand of equipment, defining adhesive forces of soil to buckets with given values of external factors; defining equipment operation mode (turn-on frequency, exposure time). Suggested method enables one to define required parameters of vibrating equipment to excavator buckets during the design phase.
Naumann, E. C.; Catherines, D. S.; Walton, W. C., Jr.
1971-01-01
Experimental and analytical investigations of the vibratory behavior of ring-stiffened truncated-cone shells are described. Vibration tests were conducted on 60 deg conical shells having up to four ring stiffeners and for free-free and clamped-free edge constraints and 9 deg conical shells, for two thicknesses, each with two angle rings and for free-free, free-clamped, and clamped-clamped edge constraints. The analytical method is based on linear thin shell theory, employing the Rayleigh-Ritz method. Discrete rings are represented as composed of one or more segments, each of which is a short truncated-cone shell of uniform thickness. Equations of constraint are used to join a ring and shell along a circumferential line connection. Excellent agreement was obtained for comparisons of experimental and calculated frequencies.
Transient flow in a compressor blade row for a periodic vibration motion
Idres, Moumen; Labanie, Mohamed; Okasha, Mohamed
2018-01-01
The goal of this work is to conduct a transient compressor blade row flow simulation as part of blade flutter modeling. An integral step of blade flutter modeling is the calculation of the aerodynamic damping factor as a function of the possible vibration mode shapes. Using Fourier method, the number of blade passages required for transient flow analysis is kept to a minimum of two for all vibration modes. In this work, a compressor rotor blade row is considered. The vibration modes are obtained using ANSYS mechanical, then, unsteady flow is obtained for vibrating blades with a harmonic motion. Work of the flow on the blade is calculated and hence the aerodynamic damping is obtained.
Golubkova, O. S.; Kataeva, T. S.; Shchepkin, D. N.; Asfin, R. E.
2017-06-01
Infrared reflection-absorption spectra of thin films of α-crystalline hexafluoroethane deposited on a gold-plated copper mirror are measured at temperatures of 70 and 80 K. The bands corresponding to strong in the dipole absorption vibrations ν5 and ν10 have complex contours, the shape of which is explained in terms of the resonant dipole-dipole interaction between identical spectrally active molecules of the crystal. Splittings of the complex ν5 and ν10 bands are explained taking into account two effects: the Davydov splitting and the LO-TO splitting of the strong modes. Bands of the asymmetric 13C12CF6 isotopologue in the absorption spectrum of the crystal exhibit an anomalously large isotope shift as compared with the shift in the spectrum of free molecules. This anomaly is explained by intermolecular resonant dipole-dipole interaction of asymmetric 13C12CF6 isotopologue with molecules of the environment, consisting of the most abundant 12C2F6 isotopologue. The correctness of the given interpretation is confirmed calculating these three effects in the model of resonant dipole-dipole interaction.
Das, Pratik Kr.; Mandal, Nibir; Arya, A.
2017-02-01
Naturally occurring zinc sulfide (ZnS) contains a substantial amount of iron (Fe) in its crystal structure. This study explores the possible effects of such Fe impurity on the physical properties of its two phases: B3 and B1, crystallizing in a cubic system with zinc blend (ZB, space group: F-43m) and rock salt (RS, space group: Fm-3m) structures. We have performed ab-initio calculations within density functional theory (DFT) to determine the equilibrium volumes of B3- and B1-ZnS phases, doped with Fe in varying concentrations (0% to 25%), and their corresponding lattice structures. Using the enthalpy cross-over, we determine the pressure-dependent B3 to B1 transition as a function of Fe concentration. Our DFT calculations suggest an inverse relation of the transition pressure with Fe content. For pure ZnS, the transition occurs at 17 GPa, which drops to ˜12 GPa for 25% Fe. This study also provides a first-hand analysis of the elastic constants (C11, C12, and C44) to show the effects of Fe impurity on the mechanical properties of ZnS phases. Their values generally drop due to Fe and the differences widen with increasing pressure. Fe causes large softening of C44, especially for the B1 phase. We have also performed phonon calculations to characterize the vibrational properties and explain the pressure dependent structural instability of the B3- ZnS. Finally, our calculations of the electronic structures show a transition of semi-conductor to conductor behavior of ZnS with incorporation of Fe impurity.
Effect of curvature on structures and vibrations of zigzag carbon ...
Indian Academy of Sciences (India)
First-principles pseudopotential-based density functional theory calculations of atomic and electronic structures, full phonon dispersions and thermal properties of zigzag single wall carbon nanotubes (SWCNTs) are presented. By determining the correlation between vibrational modes of a graphene sheet and of the ...
Chen, J. T.; Chen, I. L.; Lee, Y. T.
2008-03-01
Zhang and Chen [The boundary point method for the calculation of exterior acoustic radiation problem, Journal of Sound and Vibration 228 (1999) 761-772] proposed a boundary point method (BPM) for exterior acoustic problems. The idea is similar to the CHUNKY CHIEF by Wu [A weighted residual formulation for the CHIEF method in acoustic, Journal of Acoustical Society of America 90 (1991) 1608-1614], but Chunky CHIEF provides constraints using null-field equations while the BPM used the CHUNKY BLOCK singularity outside the domain. The mathematical structure is similar to Trefftz method and method of fundamental solutions [J.T. Chen et al., On the equivalence of the Trefftz method and method of fundamental solutions for Laplace and biharmonic equations, Computers & Mathematics with Applications 53 (2007) 851-879], since the interpolation function satisfies the governing equation. Later, Wu commented twice [Sean F. Wu, Comments on "The boundary point method for the calculation of exterior acoustic radiation" (by S.Y. Zhang, X.Z. Chen, Journal of Sound and Vibration 228(4) (1999) 761-772), Journal of Sound and Vibration, 298 (2006) 1173]; Sean F. Wu, Comments on "Reply to the comments on 'The boundary point method for the calculation of exterior acoustic radiation' (by S.Y. Zhang, X.Z. Chen, Journal of Sound and Vibration 228(4) (1999) 761-772)", Journal of Sound and Vibration, 298 (2006) 1176-1177] that the formulation of BPM is wrong and the authors replied also twice [X.Z. Chen, C.X. Bi, Reply to the comments on "The boundary point method for the calculation of exterior acoustic radiation" (by S.Y. Zhang, X.Z. Chen, Journal of Sound and Vibration 228(4) (1999) 761-772), Journal of Sound and Vibration, 298 (2006) 1174-1175; [X.Z. Chen, C.X. Bi, Reply to the comments on "Reply to the comments on 'The boundary point method for the calculation of exterior acoustic radiation' (by S.Y. Zhang, X.Z. Chen, Journal of Sound and Vibration 228(4) (1999) 761-772)", Journal of Sound
Energy Technology Data Exchange (ETDEWEB)
Bouteiller, Y. [Universite Paris-Nord, CNRS, Laboratoire de Physique des Lasers UMR 7538, 93430 Villetaneuse (France); Tremblay, B. [UPMC Universite Pierre et Marie Curie, UMR 7075, Laboratoire de Dynamique, Interactions et Reactivite (LADIR), F-75005 Paris (France); CNRS, UMR 7075, Laboratoire de Dynamique, Interactions et Reactivite (LADIR), F-75005 Paris (France); Perchard, J.P., E-mail: jpp@spmol.jussieu.fr [UPMC Universite Pierre et Marie Curie, UMR 7075, Laboratoire de Dynamique, Interactions et Reactivite (LADIR), F-75005 Paris (France); CNRS, UMR 7075, Laboratoire de Dynamique, Interactions et Reactivite (LADIR), F-75005 Paris (France)
2011-07-28
Graphical abstract: The spectrum of the water dimer trapped in neon has been recorded and analysed up to 14,000 cm{sup -1}. Highlights: {yields} Observation of the vibrational spectrum of the water dimer from the far infrared to the visible. {yields} Assignment based on {sup 18}O/{sup 16}O shift and on approximate values of anharmonicity coefficients. {yields} Calculations in the framework of the second-order perturbation - resonance theory. - Abstract: The infrared spectrum of the water dimer trapped in solid neon has been recorded up to the visible by improving significantly the experimental technique used in a previous paper [Y. Bouteiller, J.P. Perchard, Chem. Phys. 305 (2004) 1]. A total of 22 intramolecular transitions of the proton donor (PD) and 23 of the proton acceptor (PA) are now identified and assigned on the basis of {sup 16}O/{sup 18}O isotopic shifts and of realistic anharmonicity corrections. From an ab initio determination of the potential energy a perturbation-resonance treatment has been carried out for each polyad P{sub n}, n = 2-8. Finally combinations of intra + intermolecular transitions were identified and assigned on the basis of calculated anharmonicity coefficients.
Xu, Wei; Shi, Jia; Yang, Xianchao; Xu, Degang; Rong, Feng; Zhao, Junfa; Yao, Jianquan
2017-09-29
Multimode interferometers based on the single-mode-no-core-single-mode fiber (SNCS) structure have been widely investigated as functional devices and sensors. However, the theoretical support for the sensing mechanism is still imperfect, especially for the cladding refractive index response. In this paper, a modified model of no-core fiber (NCF) based on far from cut-off approximation is proposed to investigate the spectrum characteristic and sensing mechanism of the SNCS structure. Guided-mode propagation analysis (MPA) is used to analyze the self-image effect and spectrum response to the cladding refractive index and temperature. Verified by experiments, the performance of the SNCS structure can be estimated specifically and easily by the proposed method.
Chang, Chih-Ming; Young, Yi-Ho; Cheng, Po-Wen
2012-12-01
The age-related changes in ocular vestibular-evoked myogenic potentials (oVEMPs) elicited by galvanic vestibular stimulation (GVS) and bone-conducted vibration (BCV) might be attributed to the morphological degeneration of the vestibular system. This study employed GVS and BCV modes for eliciting oVEMPs in healthy subjects to explore the effect of aging on the vestibulo-ocular reflex (VOR) pathway. Sixty-nine healthy subjects (aged 22-69 years) were divided into 5 groups of 12-19 subjects by decades of age. All subjects underwent oVEMPs using GVS and BCV modes. The prevalence and parameters of oVEMPs, including nI latency, pI latency, nI-pI interval, and nI-pI amplitude were measured and compared. The prevalences of GVS-oVEMPs had nonsignificant differences among all age groups, whereas that of BCV-oVEMPs in the over-60 group was significantly lower than those in the under-60 groups. In GVS-oVEMPs, the group over 60 years had significantly longer nI, pI latencies, and smaller amplitudes when compared with those under 60 years. In BCV-oVEMPs, the nI and pI latencies in the over-60 group were significantly longer than those of the under-60 groups, while the nI-pI amplitudes of groups over 50 years were significantly smaller than those of groups under 50 years. All oVEMP parameters exhibited significant differences between GVS- and BCV-oVEMPs in each age group.
Nahavandi, Amir; Korayem, Moharam Habibnejad
2015-10-01
The aim of this paper is to determine the effects of forces exerted on the cantilever probe tip of an atomic force microscope (AFM). These forces vary according to the separation distance between the probe tip and the surface of the sample being examined. Hence, at a distance away from the surface (farther than d(on)), these forces have an attractive nature and are of Van der Waals type, and when the probe tip is situated in the range of a₀≤ d(ts) ≤ d(on), the capillary force is added to the Van der Waals force. At a distance of d(ts) ≤ a₀, the Van der Waals and capillary forces remain constant at intermolecular distances, and the contact repulsive force repels the probe tip from the surface of sample. The capillary force emerges due to the contact of thin water films with a thickness of h(c) which have accumulated on the sample and probe. Under environmental conditions a layer of water or hydrocarbon often forms between the probe tip and sample. The capillary meniscus can grow until the rate of evaporation equals the rate of condensation. For each of the above forces, different models are presented. The smoothness or roughness of the surfaces and the geometry of the cantilever tip have a significant effect on the modeling of forces applied on the probe tip. Van der Waals and the repulsive forces are considered to be the same in all the simulations, and only the capillary force is altered in order to evaluate the role of this force in the AFM-based modeling. Therefore, in view of the remarkable advantages of the piezoelectric microcantilever and also the extensive applications of the tapping mode, we investigate vibrational motion of the piezoelectric microcantilever in the tapping mode. The cantilever mentioned is entirely covered by two piezoelectric layers that carry out both the actuation of the probe tip and the measuringof its position.
Energy Technology Data Exchange (ETDEWEB)
Silva, M.D.P.; Silva, F.C. [Departamento de Química, CCET, Universidade Federal do Maranhão, 65085-580 São Luís, MA (Brazil); Sinfrônio, F.S.M. [Departamento de Engenharia Elétrica, CCET, Universidade Federal do Maranhão, 65085-580 São Luís, MA (Brazil); Paschoal, A.R. [Departamento de Física, Universidade Federal do Ceará, Campus do Pici, 60455-760 Fortaleza, CE (Brazil); Silva, E.N. [Departamento de Física, CCET, Universidade Federal do Maranhão, 65085-580 São Luís, MA (Brazil); Paschoal, C.W.A., E-mail: paschoal@ufma.br [Departamento de Física, CCET, Universidade Federal do Maranhão, 65085-580 São Luís, MA (Brazil); Department of Materials Science and Engineering, University of California Berkeley, 94720-1760 Berkeley, CA (United States); Department of Physics, University of California Berkeley, 94720-7300 Berkeley, CA (United States)
2014-01-25
Highlights: • We synthesized mixed spinels by polymeric precursor method. • We investigated the structural and vibrational properties of the mixed. • We investigated the synthesis condition effects in these properties. • We proposed a complete phonon description for CuFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} spinels. -- Abstract: In this work Co–Cu mixed spinel Co{sub 1−x}Cu{sub x}Fe{sub 2}O{sub 4} powders were obtained by polymeric precursors method at several annealing temperatures between 700 and 1200 °C. The samples were characterized by means of X-ray powder diffraction, confirming the ideal inverse spinel structure for CoFe{sub 2}O{sub 4} sample and the tetragonal distorted inverse spinel structure for CuFe{sub 2}O{sub 4} sample. Based on FWHM evaluation, we estimated that crystallite sizes varies between 27 and 37 nm for the non-substituted samples. The optical-active modes were determined by infrared and Raman spectroscopies. The phonon spectra showed a local tetragonal distortion for mixed samples.
Energy Technology Data Exchange (ETDEWEB)
Hardage, Bob [Bureau of Economic Geology
2013-07-01
This 3-year project was terminated at the end of Year 1 because the DOE Geothermal project-evaluation committee decided one Milestone was not met and also concluded that our technology would not be successful. The Review Panel recommended a ?no-go? decision be implemented by DOE. The Principal Investigator and his research team disagreed with the conclusions reached by the DOE evaluation committee and wrote a scientifically based rebuttal to the erroneous claims made by the evaluators. We were not told if our arguments were presented to the people who evaluated our work and made the ?no-go? decision. Whatever the case regarding the information we supplied in rebuttal, we received an official letter from Laura Merrick, Contracting Officer at the Golden Field Office, dated June 11, 2013 in which we were informed that project funding would cease and instructed us to prepare a final report before September 5, 2013. In spite of the rebuttal arguments we presented to DOE, this official letter repeated the conclusions of the Review Panel that we had already proven to be incorrect. This is the final report that we are expected to deliver. The theme of this report will be another rebuttal of the technical deficiencies claimed by the DOE Geothermal Review Panel about the value and accomplishments of the work we did in Phase 1 of the project. The material in this report will present images made from direct-S modes produced by vertical-force sources using the software and research findings we developed in Phase 1 that the DOE Review Panel said would not be successful. We made these images in great haste when we were informed that DOE Geothermal rejected our rebuttal arguments and still regarded our technical work to be substandard. We thought it was more important to respond quickly rather than to take additional time to create better quality images than what we present in this Final Report.
Cai, Kaicong; Zheng, Xuan; Du, Fenfen
2017-08-01
The spectroscopy of amide-I vibrations has been widely utilized for the understanding of dynamical structure of polypeptides. For the modeling of amide-I spectra, two frequency maps were built for β-peptide analogue (N-ethylpropionamide, NEPA) in a number of solvents within different schemes (molecular mechanics force field based, GM map; DFT calculation based, GD map), respectively. The electrostatic potentials on the amide unit that originated from solvents and peptide backbone were correlated to the amide-I frequency shift from gas phase to solution phase during map parameterization. GM map is easier to construct with negligible computational cost since the frequency calculations for the samples are purely based on force field, while GD map utilizes sophisticated DFT calculations on the representative solute-solvent clusters and brings insight into the electronic structures of solvated NEPA and its chemical environments. The results show that the maps' predicted amide-I frequencies present solvation environmental sensitivities and exhibit their specific characters with respect to the map protocols, and the obtained vibrational parameters are in satisfactory agreement with experimental amide-I spectra of NEPA in solution phase. Although different theoretical schemes based maps have their advantages and disadvantages, the present maps show their potentials in interpreting the amide-I spectra for β-peptides, respectively.
A density functional theory study of Raman modes of cadmium hexathiohypodiphosphate (CdPS3
Directory of Open Access Journals (Sweden)
Shakoor Abdul
2015-06-01
Full Text Available Raman scattering investigations based on density functional theory (DFT calculations were performed to explore the vibrational modes of a cadmium hexathiohypodiphosphate CdPS3 single crystal. The calculations were performed to obtain the Raman spectra for the cadmium hexathiohypodiphosphate atoms to study the size dependence. Several vibrational modes indicating stretching and bending features related to Cd, S and P atoms were observed. Modifications of the frequency and intensity of different Raman modes with an increase in the number of atoms in CdPS3 were discussed in detail. Hydrogen atoms were added in order to make the closed shell configuration and saturate the CdPS3 as per the requisite for calculating the Raman spectra. This produced some additional modes of vibration related to hydrogen atoms. Band gap and formation energy were also calculated. The results generated are found to be in close agreement with the experimental values.
Okuda, Masaki; Higashi, Masahiro; Ohta, Kaoru; Saito, Shinji; Tominaga, Keisuke
2017-09-01
The vibrational dynamics of SCN- in H2O are theoretically investigated by molecular dynamics simulations. Based on the vibrational solvatochromism theory, we calculate the frequency-frequency time correlation function of the SCN anti-symmetric stretching mode, which is characterized by time constants of 0.13 and 1.41 ps. We find that the frequency fluctuation is almost determined by the electrostatic interaction from the water molecules in the first-hydration shell. The collective dynamics of the water molecules in the first-hydration shell is found to be similar to that of bulk water, though the hydrogen bond between the ion and water molecule is very strong.
de Bock, M. F. M.; Citrin, J.; Saarelma, S.; Temple, D.; Conway, N. J.; Kirk, A.; Meyer, H.; Michael, C. A.
2012-01-01
Edge localized modes (ELMs), that are present in most tokamak H-(high confinement) modes, can cause significant damage to plasma facing components in fusion reactors. Controlling ELMs is considered necessary and hence it is vital to understand the underlying physics. The stability of ELMs is
Ol'Khovskii, G. G.; Trushechkin, V. P.; Chadovskaya, I. I.
2010-09-01
A procedure for constructing the universal characteristic of a compressor at different positions of its inlet guide vane using experimentally obtained characteristics of the compressor and turbine, and a computer program for simulating variable operating modes of a gas turbine unit are described. Results from a comparison between calculated data and data obtained from tests of similar types of gas turbines units are presented.
Energy Technology Data Exchange (ETDEWEB)
Peterseim, Tobias; Dressel, Martin [1. Physikalisches Institut, Universität Stuttgart, Pfaffenwaldring 57, 70550 Stuttgart (Germany); Antal, Ágnes [1. Physikalisches Institut, Universität Stuttgart, Pfaffenwaldring 57, 70550 Stuttgart (Germany); Institute of Condensed Matter Physics, École Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne (Switzerland); Batail, Patrick [Laboratoire MOLTECH, UMR 6200 CNRS-Université d' Angers, Bt. K, UFR Sciences, 2 Boulevard Lavoisier, F-49045 Angers (France); Drichko, Natalia [1. Physikalisches Institut, Universität Stuttgart, Pfaffenwaldring 57, 70550 Stuttgart (Germany); Department of Physics and Astronomy, Johns Hopkins University, Baltimore, Maryland 21218 (United States)
2014-02-14
We have investigated the infrared spectra of the quarter-filled charge-ordered insulators δ-(EDT-TTF-CONMe{sub 2}){sub 2}X (X= AsF{sub 6}, Br) along all three crystallographic directions in the temperature range from 300 to 10 K. DFT-assisted normal mode analysis of the neutral and ionic EDT-TTF-CONMe{sub 2} molecule allows us to assign the experimentally observed intramolecular modes and to obtain relevant information on the charge ordering and intramolecular interactions. From frequencies of charge-sensitive vibrations we deduce that the charge-ordered state is already present at room temperature and does not change on cooling, in agreement with previous NMR measurements. The spectra taken along the stacking direction clearly show features of vibrational overtones excited due to the anharmonic electronic molecule potential caused by the large charge disproportionation between the molecular sites. The shift of certain vibrational modes indicates the onset of the structural transition below 200 K.
Energy Technology Data Exchange (ETDEWEB)
Even, J., E-mail: jacky.even@insa.rennes.fr [Université Européenne de Bretagne, INSA, FOTON, UMR CNRS 6082, 20 Avenue des Buttes de Coësmes, F-35708 Rennes (France); Pedesseau, L.; Durand, O. [Université Européenne de Bretagne, INSA, FOTON, UMR CNRS 6082, 20 Avenue des Buttes de Coësmes, F-35708 Rennes (France); Modreanu, M. [Tyndall National Institute, Lee Maltings, Prospect Row, Cork (Ireland); Huyberechts, G. [FLAMAC, Technologiepark 903, 9052 Zwijnaarde (Belgium); Servet, B. [Thales Research and Technology France, Campus Polytechnique, 1, avenue Augustin Fresnel, 91767 Palaiseau cedex France (France); Chaix-Pluchery, O. [Laboratoire des Matériaux et du Génie Physique, Grenoble INP—Minatec, 3, parvis Louis Néel, BP 257, 38016 Grenoble Cedex 1 (France)
2013-08-31
The SrCu{sub 2}O{sub 2} material is a p-type transparent conductive oxide. A theoretical study of the SrCu{sub 2}O{sub 2} crystal is performed with a state of the art implementation of the Density Functional Theory. The simulated crystal structure is compared with available X-ray diffraction data and previous theoretical modeling. Density Functional Perturbation Theory is used to study the vibrational properties of the SrCu{sub 2}O{sub 2} crystal. A symmetry analysis of the optical phonon eigenvectors at the Brillouin zone center is proposed. The Raman spectra simulated using the derivatives of the dielectric susceptibility, show a good agreement with Raman scattering experimental results. - Highlights: ► The symmetry properties of the optical phonons of the SrCu{sub 2}O{sub 2} crystal are analyzed. ► Born charges and the dynamical matrix are calculated at the Brillouin zone center. ► Density Functional Perturbation Theory (DFPT) is used to compute Raman spectrum. ► DFPT Raman spectrum is compared with experimental results.
Bokhorst, E. van; Peters, M.C.A.M.
2008-01-01
The aim of the work described in this paper was to trace and eliminate vibration sources in a low pressure system with high flow velocities. Considerable vibration on the pipe system between a flashing vessel (6.5 m diameter) and heat-exchangers resulted in fatigue failure, leakage and subsequent
Transverse intrinsic localized modes in monatomic chain and in graphene
Energy Technology Data Exchange (ETDEWEB)
Hizhnyakov, V. [Institute of Physics, University of Tartu, Ravila 14c, 50411 Tartu (Estonia); Klopov, M. [Department of Physics, Faculty of Science, Tallinn University of Technology, Ehitajate 5, 19086 Tallinn (Estonia); Shelkan, A., E-mail: shell@ut.ee [Institute of Physics, University of Tartu, Ravila 14c, 50411 Tartu (Estonia)
2016-03-06
In this paper an analytical and numerical study of anharmonic vibrations of monatomic chain and graphene in transverse (perpendicular) with respect to the chain/plane direction is presented. Due to the lack of odd anharmonicities and presence of hard quartic anharmonicity for displacements in this direction, there may exist localized anharmonic transverse modes with the frequencies above the spectrum of the corresponding phonons. Although these frequencies are in resonance with longitudinal (chain) or in-plane (graphene) phonons, the modes can decay only due to a weak anharmonic process. Therefore the lifetime of these vibrations may be very long. E.g. in the chain, according to our theoretical and numerical calculations it may exceed 10{sup 10} periods. We call these vibrations as transverse intrinsic localized modes. - Highlights: • In a stretched monatomic chain, long-living nonlinear transverse localized modes may exist. • Transverse vibrations of a chain slowly decay due to creation of longitudinal phonons. • Lifetime of transverse vibrations of a chain may exceed billion periods of vibrations. • In stretched graphene, long-living out-of-plain localized vibrations may exist.
Directory of Open Access Journals (Sweden)
I. A. Elovoy
2016-10-01
Full Text Available Purpose. The article is aimed to obtain the operational dependences for calculating the optimal intervals between car supply on loading and unloading fronts, unloading according to the criterion of minimizing operating costs. This will allow substantiating the choice of effective modes of interaction between railway stations and non-public tracks. Methodology. Methods of scientific analysis and synthesis, the method of Brandon at the approximation of the function, experimental and statistical methods of compiling the mathematical dependences were used in order to achieve the purpose. Findings. There were obtained the formulas for determination of: 1 optimal values of intervals between the car supplies to the places of loading and unloading according to the criterion of cost minimization in conditions of interaction between railway stations and non-public tracks through determined time periods; 2 medium-sized car groups in one supply on the non-public track, 3 the duration of the shunting work on car spotting in loading and unloading fronts. Originality. Operational dependences were improved for the determination of optimal values of intervals between the car supplies to the fronts of loading, unloading according to the criterion of minimizing the operational costs. Since the obtained formulas take into account the influence of: 1 the number of freight fronts involved in shunting operations with the cars near the points of loading and unloading; 2 the average number and size of the car groups, which are on the non-public tracks; 3 average size of the car supply-removal; 4 the presence of the goods siding for the fronts recharging; 5 total length of the tracks involved in recharging of the loading and unloading fronts. Practical value. The obtained operational dependences can be used in determining the parameters of supply-removal cycle to the loading and unloading fronts, the optimal values of the intervals between supplies in the interaction
Rotation of the apparent vibration plane of a swinging spring at the 1:1:2 resonance
Petrov, A. G.
2017-05-01
Nonlinear spatial vibrations of a mass point on a weightless elastic suspension (pendulum on a spring) are considered. The frequency of vertical vibrations is assumed to be equal to the doubled swinging frequency (the 1:1:2 resonance). In this case, as numerical calculations and experiments show, the vertical vibrations are unstable, which leads to the vertical vibration energy transfer to the pendulum swinging energy. The vertical vibrations of the mass point decay and, after a certain time period, the pendulum starts swinging in a certain vertical plane. This swinging is also unstable, which results in the reverse energy transfer into the vertical vibration mode. The vertical vibrations are again repeated. But after the second transfer of the vertical vibration energy to the pendulum swinging energy, the apparent plane of vibrations rotates by a certain angle. These effects are described analytically; namely, the energy transfer period, the time variations in the amplitudes of both modes, and the variations in the angle of the apparent vibration plane are determined. An asymptotic solution is also constructed for the mass point trajectory in the orbit elements. In projection on the horizonal plane, the mass point moves in a nearly elliptic trajectory. The ellipse semiaxes slowly vary with time, so that their product remains constant, and the major semiaxis slowly rotates at a constant sectorial velocity. The obtained analytic time dependence of the ellipse semiaxes and the precession angle agree well with the results of numerical calculations.
Gearbox vibration diagnostic analyzer
1992-01-01
This report describes the Gearbox Vibration Diagnostic Analyzer installed in the NASA Lewis Research Center's 500 HP Helicopter Transmission Test Stand to monitor gearbox testing. The vibration of the gearbox is analyzed using diagnostic algorithms to calculate a parameter indicating damaged components.
The effect of large amplitude motions on the vibrational intensities in hydrogen bonded complexes
DEFF Research Database (Denmark)
Mackeprang, Kasper; Hänninen, Vesa; Halonen, Lauri
2015-01-01
We have developed a model to calculate accurately the intensity of the hydrogen bonded XH-stretching vibrational transition in hydrogen bonded complexes. In the Local Mode Perturbation Theory (LMPT) model, the unperturbed system is described by a local mode (LM) model, which is perturbed...... by the intermolecular modes of the hydrogen bonded system that couple with the intramolecular vibrations of the donor unit through the potential energy surface. We have applied the model to three complexes containing water as the donor unit and different acceptor units, providing a series of increasing complex binding...... of the fundamental hydrogen bonded OH-stretching transition relative to the simpler LM model....
Modeling and Analysis of a Multi-Degree-of-Freedom Micro-Vibration Simulator
Directory of Open Access Journals (Sweden)
Xiaoming Wang
2017-01-01
Full Text Available To reproduce the disturbance forces and moments generated by the reaction/momentum wheel assembly, a multi-degree-of-freedom micro-vibration simulator is proposed. This can be used in the ground vibration experiments of an optical payload replacing the real action/momentum wheel assembly. First, the detailed structure of the micro-vibration simulator is introduced. Then, the complete system kinematic and dynamic models of the micro-vibration simulator are derived. In addition, the disturbance forces and moments produced by the micro-vibration simulator are calculated. Finally, the normal mode analysis and a cosimulation are adopted to verify the validity of this method. The analysis and simulation results show that the micro-vibration simulator can exactly reproduce the disturbance forces and moments with different amplitudes and different frequency ranges.
Energy Technology Data Exchange (ETDEWEB)
Teke, T; Milette, MP [BC Cancer Agency Centre for the Southern Interior (Canada); Huang, V; Thomas, SD [BC Cancer Agency Fraser Valley Cancer Centre (Canada)
2014-08-15
The interplay effect between the tumor motion and the radiation beam modulation during a VMAT treatment delivery alters the delivered dose distribution from the planned one. This work present and validate a method to accurately calculate the dose distribution in 4D taking into account the tumor motion, the field modulation and the treatment starting phase. A QUASAR™ respiratory motion phantom was 4D scanned with motion amplitude of 3 cm and with a 3 second period. A static scan was also acquired with the lung insert and the tumor contained in it centered. A VMAT plan with a 6XFFF beam was created on the averaged CT and delivered on a Varian TrueBeam and the trajectory log file was saved. From the trajectory log file 10 VMAT plans (one for each breathing phase) and a developer mode XML file were created. For the 10 VMAT plans, the tumor motion was modeled by moving the isocentre on the static scan, the plans were re-calculated and summed in the treatment planning system. In the developer mode, the tumor motion was simulated by moving the couch dynamically during the treatment. Gafchromic films were placed in the QUASAR phantom static and irradiated using the developer mode. Different treatment starting phase were investigated (no phase shift, maximum inhalation and maximum exhalation). Calculated and measured isodose lines and profiles are in very good agreement. For each starting phase, the dose distribution exhibit significant differences but are accurately calculated with the methodology presented in this work.
Directory of Open Access Journals (Sweden)
DONG Peng
2017-01-01
Full Text Available When one end of a fluid-filled pipe with an elastic wall is fixed and a harmonic force effect acts on the other end,a steady longitudinal vibration will be produced. Compared to the pipeline resonance mode,the amplitude of the steady longitudinal vibration of an elastic pipe is greater,and the effect on the sound is also greater. The study of the steady longitudinal vibration of pipes can better describe the effects of fluid-filled pipelines on the radiation sound field of the pipe opening. Through the contrast between the analysis calculation of the equivalent beam model and the experimental results,the accuracy of the equivalent beam model for the calculation of the steady longitudinal vibration of pipelines is verified,and a method of isolating the steady longitudinal vibration state is proposed and verified.
The Study of Vibration Processes in Oil Flooded Screw Compressors
Directory of Open Access Journals (Sweden)
I. V. Filippov
2014-01-01
Full Text Available Vibration processes that accompany most of machines and mechanisms are of interest to the researcher, as a source of information about the technical condition and the nature of the business processes flow. Vibration-based diagnostics of oil flooded screw compressors allows us to estimate the deviation of their operation from the main mode in accordance with changing the settings of vibration processes.The oil flooded screw compressor transition from the main mode of operation to the abnormal one is accompanied by complex gas-dynamic phenomena i.e. the initial gaps and their decays. This leads to changes in the nature of vibration processes, prompting suggestions that there is a relationship to a change of vibration parameters and mode of compressor operation.Studies were conducted by combined method using an analytical calculation of the decay parameters of the initial discontinuity and an experimental one based on the measurement of acceleration on the body of the real oil flooded screw compressor. A virtually adequate reaction of the decay parameters of the initial gap and the peak values of vibration acceleration to the change of operation mode of oil flooded screw compressor has been received. The peak value of the vibration acceleration was selected by the method of Gating being time-coinciding with the beginning discharge phase of the oil flooded screw compressor, and therefore, with the decay time of the initial discontinuity.This indicates a large degree of hypothesis likelihood on an existing initial break in oil flooded screw compressor when operating in abnormal conditions. This work contains the study results of vibration processes and their relationship to the operating mode of the oil flooded screw compressor, which distinguish it from the other works studied vibration processes in reciprocating compressors. The vibration parameters control of operating oil flooded screw compressor allows us to create an automatic capacity control
Koval'skaya, G. A.; Petrov, A. K.
2016-01-01
Nonlinear vibrations in a closed system of coupled nonlinear oscillators are studied using acetylene type molecules as an example. A criterion for the stable existence of long-lived vibrational states—local modes—in one of the oscillators is obtained. It is shown that the disappearance of a local mode, as well as its appearance, proceeds abruptly, and the mechanism of stabilization of these excitations is due to the presence or absence of internal resonances of an oscillatory system such as any polyatomic molecule. Energy values needed to excite vibrations in which local modes can appear are determined. It is shown that calculation results agree with experimental data.
Vibrations of rotating machinery
Matsushita, Osami; Kanki, Hiroshi; Kobayashi, Masao; Keogh, Patrick
2017-01-01
This book opens with an explanation of the vibrations of a single degree-of-freedom (dof) system for all beginners. Subsequently, vibration analysis of multi-dof systems is explained by modal analysis. Mode synthesis modeling is then introduced for system reduction, which aids understanding in a simplified manner of how complicated rotors behave. Rotor balancing techniques are offered for rigid and flexible rotors through several examples. Consideration of gyroscopic influences on the rotordynamics is then provided and vibration evaluation of a rotor-bearing system is emphasized in terms of forward and backward whirl rotor motions through eigenvalue (natural frequency and damping ratio) analysis. In addition to these rotordynamics concerning rotating shaft vibration measured in a stationary reference frame, blade vibrations are analyzed with Coriolis forces expressed in a rotating reference frame. Other phenomena that may be assessed in stationary and rotating reference frames include stability characteristic...
Directory of Open Access Journals (Sweden)
Xiaobing Ding
2016-01-01
Full Text Available Urban railway transport that connects suburbs and city areas is characterized by uneven temporal and spatial distribution in terms of passenger flow and underutilized carrying capacity. This paper aims to develop methodologies to measure the carrying capacity of the urban railway by introducing a concept of the express-slow mode. We first explore factors influencing the carrying capacity under the express-slow mode and the interactive relationships among these factors. Then we establish seven different scenarios to measure the carrying capacity by considering the ratio of the number of the express trains and the slow trains, the station where overtaking takes place, and the number of overtaking maneuvers. Taking Shanghai Metro Line 16 as an empirical study, the proposed methods to measure the carrying capacity under different express-slow mode are proved to be valid. This paper contributes to the literature by remodifying the traditional methods to measure the carrying capacity when different express-slow modes are applied to improve the carrying capacity of the suburban railway.
Directory of Open Access Journals (Sweden)
Bosneaga V.A
2013-08-01
Full Text Available The model is proposed for the calculation and research of steady state asymmetric modes and transients in three-phase three legs transformer devices with arbitrary diagram of windings connection, taking into account the electromagnetic coupling of the windings, located on different legs. Using as an example distribution transformer of 10/0.4 kV calculations and analysis were performed of the most characteristic steady asymmetrical modes, that occur during short circuit, phase failure, unbalanced load for the most common windings connections and, in particular, associated with the occurrence of zero sequence magnetic flow. For the considered regimes and schemes vector diagrams were constructed for currents and voltages as well as for the relative values of magnetic flow, which give a clear idea about their particular features.
Wanzenberg, Rainer; CERN. Geneva. ATS Department
2016-01-01
The High Luminosity Large Hadron Collider (HL-LHC) project was started with the goal to extend the discovery potential of the Large Hadron Collider (LHC). The HL-LHC study implies also an upgraded dimensions of the ALICE beam pipe. The trapped monopole and dipole Higher Order Modes (HOMs) and the short range wakefields for the new design of the ALICE vacuum chamber were calculated with help of the computer codes MAFIA and ECHO2D. The results of the short range wakefields calculations and the HOMs calculations for the ALICE vacuum chamber with new dimensions are presented in this report. The short range wakefields are presented in terms of longitudinal and transverse wake potentials and also in terms of loss and kick parameters. The frequency, the loss parameter, the R/Q and the Qvalues and also power loss parameters are presented as result of the HOMs calculations and can be converted into impedance values.
Experimental whole-field interferometry for transverse vibration of plates
Ma, Chien-Ching; Huang, Chi-Hung
2004-04-01
Most of the work on vibration analysis of plates published in the literature are analytical and numerical and very few experimental results are available. Existing modal analysis techniques such as accelerometers and laser Doppler vibrometers are pointwise measurement techniques and are used in conjunction with spectrum analyzers and modal analysis software to characterize the vibration behaviour. In this study, a whole-field technique called amplitude-fluctuation electronic speckle pattern interferometry optical system is employed to investigate the vibration behaviour of square isotropic plates with different boundary conditions. This method is very convenient to investigate vibration objects because no contact is required compared to classical modal analysis using accelerometers. High-quality interferometric fringes for mode shapes are produced instantly by a video recording system. Based on the fact that clear fringe patterns will appear only at resonant frequencies, both resonant frequencies and corresponding mode shapes can be obtained experimentally using the present method. Two different types of boundary conditions are investigated in this study, namely free-free-free-free (FFFF, 27 modes) and clamped-clamped-clamped-clamped (CCCC, 12 modes). The numerical calculations by finite element method are also performed and the results are compared with the experimental measurements. Excellent agreements are obtained for both results of resonant frequencies and mode shapes.
Structural Stability and Vibration
DEFF Research Database (Denmark)
Wiggers, Sine Leergaard; Pedersen, Pauli
This book offers an integrated introduction to the topic of stability and vibration. Strikingly, it describes stability as a function of boundary conditions and eigenfrequency as a function of both boundary conditions and column force. Based on a post graduate course held by the author at the Uni......This book offers an integrated introduction to the topic of stability and vibration. Strikingly, it describes stability as a function of boundary conditions and eigenfrequency as a function of both boundary conditions and column force. Based on a post graduate course held by the author...... and their derivation, thus stimulating them to write interactive and dynamic programs to analyze instability and vibrational modes....
Conformational analysis and vibrational spectroscopic studies on dapsone
Ildiz, Gulce Ogruc; Akyuz, Sevim
2012-11-01
In this study, the theoretical conformation analysis of free dapsone has been performed by single point energy calculations at both semi-empirical PM3 and DFT/B3LYP-3-21G theory levels and three stable conformers were determined. Both the IR and Raman spectra of the molecule in solid phase have been recorded. The IR intensities and harmonic vibrational wavenumbers of each conformer were calculated by DFT method at B3LYP/6-31++G(d,p) theory level. For the fundamental characterization, the total energy distribution (TED) calculations of the vibrational modes were done using parallel quantum mechanic solution program (SQM) and the fundamental modes were assigned. The theoretical results are in agreement with the experimental ones.
Yamamura, Hideho; Sato, Ryohei; Iwata, Yoshiharu
Global efforts toward energy conservation, increasing data centers, and the increasing use of IT equipments are leading to a demand in reduced power consumption of equipments, and power efficiency improvement of power supply units is becoming a necessity. MOSFETs are widely used for their low ON-resistances. Power efficiency is designed using time-domain circuit simulators, except for transformer copper-loss, which has frequency dependency which is calculated separately using methods based on skin and proximity effects. As semiconductor technology reduces the ON-resistance of MOSFETs, frequency dependency due to the skin effect or proximity effect is anticipated. In this study, ON-resistance of MOSFETs are measured and frequency dependency is confirmed. Power loss against rectangular current pulse is calculated. The calculation method for transformer copper-loss is expanded to MOSFETs. A frequency function for the resistance model is newly developed and parametric calculation is enabled. Acceleration of calculation is enabled by eliminating summation terms. Using this method, it is shown that the frequency dependent component of the measured MOSFETs increases the dissipation from 11% to 32% at a switching frequency of 100kHz. From above, this paper points out the importance of the frequency dependency of MOSFETs' ON-resistance, provides means of calculating its pulse losses, and improves loss calculation accuracy of SMPSs.
Vibration isolation systems, considered as systems with single degree of freedom
Directory of Open Access Journals (Sweden)
Zebilila Mohammed
2017-01-01
Full Text Available The research considers and analyzes vibration isolation systems, whose design schemes are single degree of freedom systems, including nonlinear elements - displacement limiter and viscous damper. Presented are calculation formulas in closed form for linear systems in operational modes (for harmonic and impulse loads, algorithms and examples of calculation of linear and nonlinear systems in operational and transient modes. The calculation method and the above dependences are written using the transfer (TF and impulse response functions (IRF of linear dynamical systems and dependencies that determine the relationship between these functions. The effectiveness of 2 options of vibration isolation systems in transient modes is analyzed. There is significant reduction of load from the equipment to the supporting structures in the starting-stopping modes by the use of displacement limiter.
Directory of Open Access Journals (Sweden)
Jung Jin Park
2016-05-01
Full Text Available Magnetostrictive Fe-Ga and Fe-Al alloys are promising materials for use in bending-mode vibrational energy harvesters. For this study, 50.8 mm × 5.0 mm × 0.5 mm strips of Fe-Ga and Fe-Al were cut from 0.50-mm thick rolled sheet. An atmospheric anneal was used to develop a Goss texture through an abnormal grain growth process. The anneal lead to large (011 grains that covered over 90% of sample surface area. The resulting highly-textured Fe-Ga and Fe-Al strips exhibited saturation magnetostriction values (λsat = λ∥ − λ⊥ of ∼280 ppm and ∼130 ppm, respectively. To maximize 90° rotation of magnetic moments during bending of the strips, we employed compressive stress annealing (SA. Samples were heated to 500°C, and a 100-150 MPa compressive stress was applied while at 500°C for 30 minutes and while being cooled. The effectiveness of the SA on magnetic moment rotation was inferred by comparing post-SA magnetostriction with the maximum possible yield of rotated magnetic moments, which is achieved when λ∥ = λsat and λ⊥ = 0. The uniformity of the SA along the sample length and the impact of the SA on sensing/energy harvesting performance were then assessed by comparing pre- and post-SA bending-stress-induced changes in magnetization at five different locations along the samples. The SA process with a 150 MPa compressive load improved Fe-Ga actuation along the sample length from 170 to 225 ppm (from ∼60% to within ∼80% of λsat. The corresponding sensing/energy harvesting performance improved by as much as a factor of eight in the best sample, however the improvement was not at all uniform along the sample length. The SA process with a 100 MPa compressive load improved Fe-Al actuation along the sample length from 60 to 73 ppm (from ∼46% to ∼56% of λsat, indicating only a marginally effective SA and suggesting the need for modification of the SA protocol. In spite of this, the SA was effective at improving the sensing
Directory of Open Access Journals (Sweden)
Mudar A. Abdulsattar
2013-04-01
Full Text Available Infrared spectra of hydrogenated diamond nanocrystals of one nanometer length are calculated by ab initio methods. Positions of atoms are optimized via density functional theory at the level of the generalized gradient approximation of Perdew, Burke and Ernzerhof (PBE using 3-21G basis states. The frequencies in the vibrational spectrum are analyzed against reduced masses, force constants and intensities of vibration. The spectrum can be divided into two regions depending on the properties of the vibrations or the gap separating them. In the first region, results show good matching to several experimentally obtained lines. The 500 cm−1 broad-peak acoustical branch region is characterized by pure C–C vibrations. The optical branch is centered at 1185 cm−1. Calculations show that several C–C vibrations are mixed with some C–H vibrations in the first region. In the second region the matching also extends to C–H vibration frequencies that include different modes such as symmetric, asymmetric, wagging, scissor, rocking and twisting modes. In order to complete the picture of the size dependence of the vibrational spectra, we analyzed the spectra of ethane and adamantane. The present analysis shows that acoustical and optical branches in diamond nanocrystals approach each other and collapse at 963 cm−1 in ethane. Variation of the highest reduced-mass-mode C–C vibrations from 1332 cm−1 of bulk diamond to 963 cm−1 for ethane (red shift is shown. The analysis also shows the variation of the radial breathing mode from 0 cm−1 of bulk diamond to 963 cm−1 for ethane (blue shift. These variations compare well with experiment. Experimentally, the above-mentioned modes appear shifted from their exact positions due to overlap with neighboring modes.
Huang, Chi-Hung; Lin, Yu-Chih; Ma, Chien-Ching
2004-01-01
Based on the electroelastic theory for piezoelectric plates, the vibration characteristics of piezoceramic disks with free-boundary conditions are investigated in this work by theoretical analysis, numerical simulation, and experimental measurement. The resonance of thin piezoceramic disks is classified into three types of vibration modes: transverse, tangential, and radial extensional modes. All of these modes are investigated in detail. Two optical techniques, amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and laser Doppler vibrometer (LDV), are used to validate the theoretical analysis. Because the clear fringe patterns are shown only at resonant frequencies, both the resonant frequencies and the corresponding mode shapes are obtained experimentally at the same time by the proposed AF-ESPI method. Good quality of the interferometric fringe patterns for both the transverse and extensional vibration mode shapes are demonstrated. The resonant frequencies of the piezoceramic disk also are measured by the conventional impedance analysis. Both theoretical and experimental results indicate that the transverse and tangential vibration modes cannot be measured by the impedance analysis, and only the resonant frequencies of extensional vibration modes can be obtained. Numerical calculations based on the finite element method also are performed, and the results are compared with the theoretical analysis and experimental measurements. It is shown that the finite element method (FEM) calculations and the experimental results agree fairly well for the resonant frequencies and mode shapes. The resonant frequencies and mode shapes predicted by theoretical analysis and calculated by finite element method are in good agreement, and the difference of resonant frequencies for both results with the thickness-to-diameter (h/D) ratios, ranging from 0.01 to 0.1, are presented.
Stanke, Monica; Bubin, Sergiy; Adamowicz, Ludwik
2009-06-01
Very accurate variational calculations of the fundamental pure vibrational transitions of the H3eH4e+ and L7iH+ ions are performed within the framework that does not assume the Born-Oppenheimer (BO) approximation. The non-BO wave functions expanded in terms of one-center explicitly correlated Gaussian functions multiplied by even powers of the internuclear distance are used to calculate the leading relativistic corrections. Up to 10000 Gaussian functions are used for each state. It is shown that the experimental H3eH4e+ fundamental transitions is reproduced within 0.06cm-1 by the calculations. A similar precision is expected for the calculated, but still unmeasured, fundamental transition of L7iH+ . Thus, three-electron diatomic systems are calculated with a similar accuracy as two-electron systems.
Orgován, Zoltán; Ferenczy, György G.; Steinbrecher, Thomas; Szilágyi, Bence; Bajusz, Dávid; Keserű, György M.
2018-01-01
Optimization of fragment size uc(d)-amino acid oxidase (DAAO) inhibitors was investigated using a combination of computational and experimental methods. Retrospective free energy perturbation (FEP) calculations were performed for benzo[d]isoxazole derivatives, a series of known inhibitors with two potential binding modes derived from X-ray structures of other DAAO inhibitors. The good agreement between experimental and computed binding free energies in only one of the hypothesized binding modes strongly support this bioactive conformation. Then, a series of 1-H-indazol-3-ol derivatives formerly not described as DAAO inhibitors was investigated. Binding geometries could be reliably identified by structural similarity to benzo[d]isoxazole and other well characterized series and FEP calculations were performed for several tautomers of the deprotonated and protonated compounds since all these forms are potentially present owing to the experimental pKa values of representative compounds in the series. Deprotonated compounds are proposed to be the most important bound species owing to the significantly better agreement between their calculated and measured affinities compared to the protonated forms. FEP calculations were also used for the prediction of the affinities of compounds not previously tested as DAAO inhibitors and for a comparative structure-activity relationship study of the benzo[d]isoxazole and indazole series. Selected indazole derivatives were synthesized and their measured binding affinity towards DAAO was in good agreement with FEP predictions.
Hylarides, S.
1971-01-01
In the calculation of the natural frequencies of ships more accurate values are expected when the shell-like structure of ships is taken into account by the finite element technique, especially in the higher-node vibration modes. To avoid large matrix systems an elimination process has been
Cooley, Christopher G.
2017-09-01
This study investigates the vibration and dynamic response of a system of coupled electromagnetic vibration energy harvesting devices that each consist of a proof mass, elastic structure, electromagnetic generator, and energy harvesting circuit with inductance, resistance, and capacitance. The governing equations for the coupled electromechanical system are derived using Newtonian mechanics and Kirchhoff circuit laws for an arbitrary number of these subsystems. The equations are cast in matrix operator form to expose the device's vibration properties. The device's complex-valued eigenvalues and eigenvectors are related to physical characteristics of its vibration. Because the electrical circuit has dynamics, these devices have more natural frequencies than typical electromagnetic vibration energy harvesters that have purely resistive circuits. Closed-form expressions for the steady state dynamic response and average power harvested are derived for devices with a single subsystem. Example numerical results for single and double subsystem devices show that the natural frequencies and vibration modes obtained from the eigenvalue problem agree with the resonance locations and response amplitudes obtained independently from forced response calculations. This agreement demonstrates the usefulness of solving eigenvalue problems for these devices. The average power harvested by the device differs substantially at each resonance. Devices with multiple subsystems have multiple modes where large amounts of power are harvested.
Oliveira, A Virgílio M; Gaspar, Adélio R; Quintela, Divo A
2008-11-01
The present work is dedicated to a comparative analysis of calculation methods about clothing insulation with a thermal manikin operating under the thermal comfort regulation mode. The serial, global, and parallel calculation methods are considered and the thermal insulation results for garments (30) and ensembles (9) are discussed. The serial and parallel methods presents the higher and lower values, respectively, and the differences were sometimes significant. Considering the results for the effective thermal insulation, the mean values of the relative differences between the serial and global methods were 25.7% for the daily wear garments, 45.2% for the cold protective garments and 38.5% for the ensembles. The corresponding mean values for the global and parallel methods were 8.7, 15.8, and 10.5%, respectively. Since any uneven clothing insulation is to be expected as a source of error, particular care must be required when the calculation methods deal with cold protective clothing.
Directory of Open Access Journals (Sweden)
Somisetti V. Sambasivarao
2014-01-01
Full Text Available Docking calculations have been conducted on 36 cellulase enzymes and the results were evaluated by a machine learning algorithm to determine the nature of the enzyme (i.e. endo- or exo- enzymatic activity. The docking calculations have also been used to identify crucial substrate-enzyme interactions, and establish structure-function relationships. The use of carboxymethyl cellulose as a docking substrate is found to correctly identify the endo- or exo- behavior of cellulase enzymes with 92% accuracy while cellobiose docking calculations resulted in an 86% predictive accuracy. The binding distributions for cellobiose have been classified into two distinct types; distributions with a single maximum or distributions with a bi-modal structure. It is found that the uni-modal distributions correspond to exo- type enzyme while a bi-modal substrate docking distribution corresponds to endo- type enzyme. These results indicate that the use of docking calculations and machine learning algorithms are a fast and computationally inexpensive method for predicting if a cellulase enzyme possesses primarily endo- or exo- type behavior, while also revealing critical enzyme-substrate interactions.
DEFF Research Database (Denmark)
Stokbro, Kurt
1999-01-01
We report a first principles study of the structure and the vibrational properties of the Si(100)-H(2 x 1) surface in an electric field. The calculated vibrational parameters are used to model the vibrational modes in the presence of the electric field corresponding to a realistic scanning...... at room temperature). We calculate the implications for current induced desorption of H using a recently developed first principles model of electron inelastic scattering. The calculations show that inelastic scattering events with energy transfer n (h) over bar omega, where n>1, play an important role...
Czech Academy of Sciences Publication Activity Database
Brauer, B.; Gerber, R. B.; Kabeláč, Martin; Hobza, Pavel; Bakker, J. M.; Abo-Riziq, A.; Vries de, M. S.
2005-01-01
Roč. 109, - (2005), s. 6974-6984 ISSN 1089-5639 Grant - others:NSF(US) CHE-0244341 Institutional research plan: CEZ:AV0Z40550506 Keywords : nucleic acids bases * vibrational spectrum * frequencies anharmonicity Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.898, year: 2005
Raman active modes of NiSi crystal
Energy Technology Data Exchange (ETDEWEB)
Wan Li, E-mail: liwan_china@yahoo.com.c [Department of Physics, Wenzhou University (China); Tang Bo; Cheng Xinhong; Ren Yiming; Zhang Xuefei; Xu Dapeng; Luo Haijun; Huang Yunmi [Department of Physics, Wenzhou University (China)
2009-08-01
Raman scattering intensities of the NiSi Raman-active modes have been calculated with three Raman measurement configurations, which can be used for the symmetry assignment of the NiSi Raman peaks. Raman-active vibrations of the NiSi crystal have also been theoretically studied. Results show that the lattices with A{sub g} and B{sub 2g} modes vibrate only in the plane normal to the NiSi[0 1 0] direction while the lattices with B{sub 1g} and B{sub 3g} modes vibrate only along the NiSi[0 1 0] axis. Based on such study, the relationship between the anisotropic strain distribution in the NiSi thin film and the Raman peak shifts has been briefly discussed.
GUIONNEAU, A; Khardi, S.; Andre, M
2010-01-01
Ces travaux visent à faire un état de l'art et à améliorer les méthodes d'estimation et d'inventaire des émissions de polluants des transports non routiers. Ces modes de transports sont le transport aérien, le transport ferroviaire, le transport maritime et le transport fluvial. Cette étude implique un descriptif des secteurs, un inventaire des polluants avec leurs effets sur l'environnement, un état de l'art des méthodes de calcul des émissions incluant une comparaison des méthodes, les appl...
Directory of Open Access Journals (Sweden)
M. Peron
2017-10-01
Full Text Available Recently some methods for the rapid calculation of notch stress intensity factors (NSIFs have been developed and three of them are compared in this work. First, the criteria proposed by Lazzarin et al. and Treifi et al. have been reviewed. The former is based on the calculation of the mean value of SED on two different control volume (characterized by two different radius values centred at the stress singularity point, whereas the latter takes advantage of the strain energy density averaged within two control volumes (semi-circular sector centred at the notch tip. Then, a new method based on the evaluation of the total and deviatoric SED averaged in a single control volume has been proposed. Finally, plate specimens weakened by different notch geometries have been subjected to the application of the above mentioned methods and the obtained values of the NSIFs have been compared with those derived according to Gross and Mendelson
Quantum correlation dynamics in photosynthetic processes assisted by molecular vibrations
Energy Technology Data Exchange (ETDEWEB)
Giorgi, G.L., E-mail: g.giorgi@inrim.it [INRIM, Strada delle Cacce 91, I-10135 Torino (Italy); Roncaglia, M. [INRIM, Strada delle Cacce 91, I-10135 Torino (Italy); Raffa, F.A. [Politecnico di Torino, Dipartimento di Scienza Applicata e Tecnologia, Corso Duca degli Abruzzi 24, I-10129 Torino (Italy); Genovese, M. [INRIM, Strada delle Cacce 91, I-10135 Torino (Italy)
2015-10-15
During the long course of evolution, nature has learnt how to exploit quantum effects. In fact, recent experiments reveal the existence of quantum processes whose coherence extends over unexpectedly long time and space ranges. In particular, photosynthetic processes in light-harvesting complexes display a typical oscillatory dynamics ascribed to quantum coherence. Here, we consider the simple model where a dimer made of two chromophores is strongly coupled with a quasi-resonant vibrational mode. We observe the occurrence of wide oscillations of genuine quantum correlations, between electronic excitations and the environment, represented by vibrational bosonic modes. Such a quantum dynamics has been unveiled through the calculation of the negativity of entanglement and the discord, indicators widely used in quantum information for quantifying the resources needed to realize quantum technologies. We also discuss the possibility of approximating additional weakly-coupled off-resonant vibrational modes, simulating the disturbances induced by the rest of the environment, by a single vibrational mode. Within this approximation, one can show that the off-resonant bath behaves like a classical source of noise.
Kang, Sang-Won; Suh, Tae-Suk; Chung, Jin-Beom; Eom, Keun-Yong; Song, Changhoon; Kim, In-Ah; Kim, Jae-Sung; Lee, Jeong-Woo; Cho, Woong
2017-02-01
The purpose of this study was to evaluate the impact of dosimetric and radiobiological parameters on treatment plans by using different dose-calculation algorithms and delivery-beam modes for prostate stereotactic body radiation therapy using an endorectal balloon. For 20 patients with prostate cancer, stereotactic body radiation therapy (SBRT) plans were generated by using a 10-MV photon beam with flattening filter (FF) and flattening-filter-free (FFF) modes. The total treatment dose prescribed was 42.7 Gy in 7 fractions to cover at least 95% of the planning target volume (PTV) with 95% of the prescribed dose. The dose computation was initially performed using an anisotropic analytical algorithm (AAA) in the Eclipse treatment planning system (Varian Medical Systems, Palo Alto, CA) and was then re-calculated using Acuros XB (AXB V. 11.0.34) with the same monitor units and multileaf collimator files. The dosimetric and the radiobiological parameters for the PTV and organs at risk (OARs) were analyzed from the dose-volume histogram. An obvious difference in dosimetric parameters between the AAA and the AXB plans was observed in the PTV and rectum. Doses to the PTV, excluding the maximum dose, were always higher in the AAA plans than in the AXB plans. However, doses to the other OARs were similar in both algorithm plans. In addition, no difference was observed in the dosimetric parameters for different delivery-beam modes when using the same algorithm to generate plans. As a result of the dosimetric parameters, the radiobiological parameters for the two algorithm plans presented an apparent difference in the PTV and the rectum. The average tumor control probability of the AAA plans was higher than that of the AXB plans. The average normal tissue complication probability (NTCP) to rectum was lower in the AXB plans than in the AAA plans. The AAA and the AXB plans yielded very similar NTCPs for the other OARs. In plans using the same algorithms, the NTCPs for delivery
Nonlinear resonances of three modes in a high-T{sub c} superconducting magnetic levitation system
Energy Technology Data Exchange (ETDEWEB)
Sasaki, Masahiko, E-mail: galian@z2.keio.jp; Sakaguchi, Ryunosuke; Sugiura, Toshihiko, E-mail: sugiura@mach.keio.ac.jp
2013-11-15
Highlights: •We studied two nonlinear vibrations of a levitated beam supported by superconductors. •One of the vibrations is combination resonance of the 1st mode and the 3rd mode. •The other vibration is autoparametric resonance of the 2nd mode. •When the amplitude of the 2nd mode is small, the combination resonance is suppressed. •Otherwise, the two resonances can be resonated simultaneously. -- Abstract: In a high-T{sub c} superconducting magnetic levitation system, an object can levitate without control and contact. So it is expected to be applied to magnetically levitated transportation. To use it safely, lightening the levitated object is necessary. But this reduces the bending stiffness of the object. Besides, the system has nonlinearity. Therefore nonlinear elastic vibration can occur. This study focused on how plural nonlinear elastic vibrations of the 1st, 2nd and 3rd modes simultaneously occur. Our numerical calculation and experiment found out that the three modes simultaneously resonate when the amplitude of the 2nd mode is large enough whereas only the 2nd mode resonates when it is small.
Bulychev, V P; Buturlimova, M V; Tokhadze, K G
2016-08-25
The geometrical parameters, the frequencies, and absolute intensities for transitions between vibrational states of NH3···cis-HONO and NH3···cis-DONO hydrogen-bonded complexes are calculated using the approach earlier tested in calculations of isolated molecules of nitrous acid and the NH3···trans-HONO and NH3··trans-DONO complexes. Vibrational wave functions and energy values of the complexes are derived from variational solutions of anharmonic equations in one to four dimensions. The equilibrium nuclear configuration and potential energy surfaces are calculated by the MP2/aug-cc-pVTZ method with the basis set superposition error taken into account. Comparison of the obtained results with the analogous data calculated in the same approximation for isolated cis- and trans-HONO (DONO) molecules and the NH3···trans-HONO (DONO) complexes provides information about the changes in the spectroscopic and geometrical parameters of nitrous acid upon cis-trans transition, H/D substitution, and H-bond formation.