WorldWideScience

Sample records for vibrational intensity distributions

  1. Modeling Vibration Intensity of Aircraft Bevel Gears

    Directory of Open Access Journals (Sweden)

    V. V. Golovanov

    2017-01-01

    Full Text Available The subject is the aircraft bevel gears, which are part of the drive systems of gas turbine engines and helicopter transmissions. The article deals with defect specifics of the aircraft conical gears with a circular tooth as compared to the conical gear wheels of general engineering. The finite element method has been used to find by calculation that the main reason for destruction of aircraft bevel gears is a resonant vibration excitation of the gear wheel rim due to its nodal diameter eigenvibrations happened to be within the operating range of the transmission rotation frequencies. A parametric finite element model has been developed. It allows us to investigate the impact of modification parameters of the drive side of gear wheels on the function of the kinematic transmission error at different values of transmitted torque. Using the method of main coordinates, a reduced dynamic model of the bevel gear has been developed to allow simulating the vibration intensity of bevel gears with various parameters of the working profile modification. Within the framework of evaluation test of the dynamic model, amplitude-frequency characteristics have been constructed for the main parameters of transmission oscillations, including vibrational stresses in the teeth space. It is found that modification parameters of the transmission drive side have a significant effect on the vibration intensity of the bevel gears in the entire operating range. The main factor affecting the vibration stress amplitude in the gear wheel is the amplitude of the kinematic error function with the corresponding torque transmitted. The obtained research results can be used when designing the new aircraft drives and modernizing the existing ones. As part of the further development, it is expected to create a technique for recording the damage accumulation in the conical gears, taking into account the typical flight profile of a gas turbine engine or a helicopter.

  2. Energetics, structures, vibrational frequencies, vibrational absorption, vibrational circular dichroism and Raman intensities of Leu-enkephalin

    DEFF Research Database (Denmark)

    Jalkanen, Karl J.

    2003-01-01

    Here we present several low energy conformers of Leu-enkephalin (LeuE) calculated with the density functional theory using the Becke 3LYP hybrid functional and the 6-31G* basis set. The structures, conformational energies, vibrational frequencies, vibrational absorption (VA) intensities......, vibrational circular dichroism (VCD) intensities and Raman scattering intensities are reported for the conformers of LeuE which are expected to be populated at room temperature. The species of LeuE-present in non-polar solvents is the neutral non-ionic species with the NH2 and CO2H groups, in contrast...... to the zwitterionic neutral species with the NH3+ and CO2- groups which predominates in aqueous solution and in the crystal. All of our attempts to find the zwitterionic species in the isolated state failed, with the result that a hydrogen atom from the positively charged N-terminus ammonium group transferred either...

  3. Adaptations of mouse skeletal muscle to low intensity vibration training

    Science.gov (United States)

    McKeehen, James N.; Novotny, Susan A.; Baltgalvis, Kristen A.; Call, Jarrod A.; Nuckley, David J.; Lowe, Dawn A.

    2013-01-01

    Purpose We tested the hypothesis that low intensity vibration training in mice improves contractile function of hindlimb skeletal muscles and promotes exercise-related cellular adaptations. Methods We subjected C57BL/6J mice to 6 wk, 5 d·wk−1, 15 min·d−1 of sham or low intensity vibration (45 Hz, 1.0 g) while housed in traditional cages (Sham-Active, n=8; Vibrated-Active, n=10) or in small cages to restrict physical activity (Sham-Restricted, n=8; Vibrated-Restricted, n=8). Contractile function and resistance to fatigue were tested in vivo (anterior and posterior crural muscles) and ex vivo on the soleus muscle. Tibialis anterior and soleus muscles were evaluated histologically for alterations in oxidative metabolism, capillarity, and fiber types. Epididymal fat pad and hindlimb muscle masses were measured. Two-way ANOVAs were used to determine effects of vibration and physical inactivity. Results Vibration training resulted in a 10% increase in maximal isometric torque (P=0.038) and 16% faster maximal rate of relaxation (P=0.030) of the anterior crural muscles. Posterior crural muscles were unaffected by vibration, with the exception of greater rates of contraction in Vibrated-Restricted mice compared to Vibrated-Active and Sham-Restricted mice (P=0.022). Soleus muscle maximal isometric tetanic force tended to be greater (P=0.057) and maximal relaxation was 20% faster (P=0.005) in Vibrated compared to Sham mice. Restriction of physical activity induced muscle weakness but was not required for vibration to be effective in improving strength or relaxation. Vibration training did not impact muscle fatigability or any indicator of cellular adaptation investigated (P≥0.431). Fat pad but not hindlimb muscle masses were affected by vibration training. Conclusion Vibration training in mice improved muscle contractility, specifically strength and relaxation rates, with no indication of adverse effects to muscle function or cellular adaptations. PMID:23274599

  4. Distributed Fiber-Optic Sensors for Vibration Detection

    Science.gov (United States)

    Liu, Xin; Jin, Baoquan; Bai, Qing; Wang, Yu; Wang, Dong; Wang, Yuncai

    2016-01-01

    Distributed fiber-optic vibration sensors receive extensive investigation and play a significant role in the sensor panorama. Optical parameters such as light intensity, phase, polarization state, or light frequency will change when external vibration is applied on the sensing fiber. In this paper, various technologies of distributed fiber-optic vibration sensing are reviewed, from interferometric sensing technology, such as Sagnac, Mach–Zehnder, and Michelson, to backscattering-based sensing technology, such as phase-sensitive optical time domain reflectometer, polarization-optical time domain reflectometer, optical frequency domain reflectometer, as well as some combinations of interferometric and backscattering-based techniques. Their operation principles are presented and recent research efforts are also included. Finally, the applications of distributed fiber-optic vibration sensors are summarized, which mainly include structural health monitoring and perimeter security, etc. Overall, distributed fiber-optic vibration sensors possess the advantages of large-scale monitoring, good concealment, excellent flexibility, and immunity to electromagnetic interference, and thus show considerable potential for a variety of practical applications. PMID:27472334

  5. Distributed Fiber-Optic Sensors for Vibration Detection.

    Science.gov (United States)

    Liu, Xin; Jin, Baoquan; Bai, Qing; Wang, Yu; Wang, Dong; Wang, Yuncai

    2016-07-26

    Distributed fiber-optic vibration sensors receive extensive investigation and play a significant role in the sensor panorama. Optical parameters such as light intensity, phase, polarization state, or light frequency will change when external vibration is applied on the sensing fiber. In this paper, various technologies of distributed fiber-optic vibration sensing are reviewed, from interferometric sensing technology, such as Sagnac, Mach-Zehnder, and Michelson, to backscattering-based sensing technology, such as phase-sensitive optical time domain reflectometer, polarization-optical time domain reflectometer, optical frequency domain reflectometer, as well as some combinations of interferometric and backscattering-based techniques. Their operation principles are presented and recent research efforts are also included. Finally, the applications of distributed fiber-optic vibration sensors are summarized, which mainly include structural health monitoring and perimeter security, etc. Overall, distributed fiber-optic vibration sensors possess the advantages of large-scale monitoring, good concealment, excellent flexibility, and immunity to electromagnetic interference, and thus show considerable potential for a variety of practical applications.

  6. Distributed Fiber-Optic Sensors for Vibration Detection

    Directory of Open Access Journals (Sweden)

    Xin Liu

    2016-07-01

    Full Text Available Distributed fiber-optic vibration sensors receive extensive investigation and play a significant role in the sensor panorama. Optical parameters such as light intensity, phase, polarization state, or light frequency will change when external vibration is applied on the sensing fiber. In this paper, various technologies of distributed fiber-optic vibration sensing are reviewed, from interferometric sensing technology, such as Sagnac, Mach–Zehnder, and Michelson, to backscattering-based sensing technology, such as phase-sensitive optical time domain reflectometer, polarization-optical time domain reflectometer, optical frequency domain reflectometer, as well as some combinations of interferometric and backscattering-based techniques. Their operation principles are presented and recent research efforts are also included. Finally, the applications of distributed fiber-optic vibration sensors are summarized, which mainly include structural health monitoring and perimeter security, etc. Overall, distributed fiber-optic vibration sensors possess the advantages of large-scale monitoring, good concealment, excellent flexibility, and immunity to electromagnetic interference, and thus show considerable potential for a variety of practical applications.

  7. Transverse vibration of spinning disk with attached distributed patch ...

    African Journals Online (AJOL)

    Free and forced transverse vibration characteristics of a thin spinning disc attached to a rigid core have been investigated by finite element analysis using ANSYS software. The effect of discrete point masses and patches of distributed masses attached at the periphery of the plate on free and forced vibration behavior of a ...

  8. Flow distribution and tube vibration in heat exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, H.L.

    1985-07-01

    A project was initiated to study flow distribution and tube vibration in heat exchangers. An experimental program was carried out on a full-size heat exchanger in four test phases of parametric study. The flow induced vibration data were used to quantify and develop non-intrusive vibration monitoring techniques for online problem evaluation and to study the influence of design features and conditions on the vibration. The in-tube vibration data obtained have shown that the vibroacoustic and microphone monitoring techniques to be reliable and accurate methods for the detection of tube impacting in an operating heat exchanger. Development of work on the use of a two-accelerator vibroacoustic technique for the location of impacting zones in a bundle showed promise and is currently being employed in the field. The in-tube vibration data have demonstrated the effects that changes in the design of a bundle can have on tube vibration in that bundle. These results indicate that an important factor in bundle design is the local flow distribution in areas of high vibration susceptibility. The in-tube data have demonstrated that tubes in zones other than the inlet region can be susceptible to a form of periodic resonant excitation. This observation has implications for cases where flow reduction is implemented to avoid an instability problem. Such a reduction could bring the tube bundle into a flow regime where it is susceptible to the resonant excitation. 10 refs., 55 figs., 4 tabs.

  9. A Detailed Level Kinetics Model of NO Vibrational Energy Distributions

    Science.gov (United States)

    Sharma, Surendra P.; Gilmore, John; Cavolowsky, John A. (Technical Monitor)

    1996-01-01

    Several contemporary problems have pointed to the desirability of a detailed level kinetics approach to modeling the distribution of vibrational energy in NO. Such a model is necessary when vibrational redistribution reactions are insufficient to maintain a Boltzmann distribution over the vibrational energy states. Recent calculations of the rate constant for the first reaction of the Zeldovich mechanism (N2 + O (goes to) NO + N) have suggested that the product NO is formed in high vibrational states. In shock layer flowfields, the product NO molecules may experience an insufficient number of collisions to establish a Boltzmann distribution over vibrational states, thus necessitating a level kinetics model. In other flows, such as expansions of high temperature air, fast, near-resonance vibrational energy exchanges with N2 and O2 may also require a level specific model for NO because of the relative rates of vibrational exchange and redistribution. The proposed report will integrate computational and experimental components to construct such a model for the NO molecule.

  10. Whole-body vibration therapy in intensive care patients: A feasibility and safety study.

    Science.gov (United States)

    Boeselt, Tobias; Nell, Christoph; Kehr, Katahrina; Holland, Angélique; Dresel, Marc; Greulich, Timm; Tackenberg, Björn; Kenn, Klaus; Boeder, Johannes; Klapdor, Benjamin; Kirschbaum, Andreas; Vogelmeier, Claus; Alter, Peter; Koczulla, Andreas Rembert

    2016-03-01

    Admission to the intensive care unit is associated with sustained loss of muscle mass, reduced quality of life and increased mortality. Early rehabilitation measures may counteract this process. New approaches to rehabilitation while the patient remains in bed are whole-body vibration alone and whole-body vibration with a dumbbell. The aims of this study are to determine the safety of whole-body vibration for patients admitted to the intensive care unit, and to compare the effects of these techniques in intensive care unit patients and healthy subjects. Twelve intensive care unit patients and 12 healthy subjects using whole-body vibration for the first time were examined while lying in bed. First both groups performed whole body vibration over 3 min. In a second step whole body vibration with dumbbell was performed. In order to determine the safety of the training intensity, heart rate, oxygen saturation and blood pressure were measured. The study was approved by the Marburg ethics committee. There were minor reversible and transient increases in diastolic blood pressure (p = 0.005) and heart rate (p = 0.001) in the control group with whole-body vibration with a dumbbell. In intensive care patients receiving whole-body vibration alone, there were increases in diastolic blood pressure (p = 0.011) and heart rate (p vibration and whole-body vibration with a dumbbell for intensive care unit in-bed patients. No clinically significant safety problems were found. Whole-body vibration and whole-body vibration with a dumbbell might therefore be alternative methods for use in early in-bed rehabilitation, not only for hospitalized patients.

  11. Adaptations of mouse skeletal muscle to low-intensity vibration training.

    Science.gov (United States)

    McKeehen, James N; Novotny, Susan A; Baltgalvis, Kristen A; Call, Jarrod A; Nuckley, David J; Lowe, Dawn A

    2013-06-01

    We tested the hypothesis that low-intensity vibration training in mice improves contractile function of hindlimb skeletal muscles and promotes exercise-related cellular adaptations. We subjected C57BL/6J mice to 6 wk, 5 d·wk, 15 min·d of sham or low-intensity vibration (45 Hz, 1.0g) while housed in traditional cages (Sham-Active, n = 8; Vibrated-Active, n = 10) or in small cages to restrict physical activity (Sham-Restricted, n = 8; Vibrated-Restricted, n = 8). Contractile function and resistance to fatigue were tested in vivo (anterior and posterior crural muscles) and ex vivo on the soleus muscle. Tibialis anterior and soleus muscles were evaluated histologically for alterations in oxidative metabolism, capillarity, and fiber types. Epididymal fat pad and hindlimb muscle masses were measured. Two-way ANOVAs were used to determine the effects of vibration and physical inactivity. Vibration training resulted in a 10% increase in maximal isometric torque (P = 0.038) and 16% faster maximal rate of relaxation (P = 0.030) of the anterior crural muscles. Posterior crural muscles were unaffected by vibration, except greater rates of contraction in Vibrated-Restricted mice compared with Vibrated-Active and Sham-Restricted mice (P = 0.022). Soleus muscle maximal isometric tetanic force tended to be greater (P = 0.057), and maximal relaxation was 20% faster (P = 0.005) in vibrated compared with sham mice. The restriction of physical activity induced muscle weakness but was not required for vibration to be effective in improving strength or relaxation. Vibration training did not affect muscle fatigability or any indicator of cellular adaptation investigated (P ≥ 0.431). Fat pad but not hindlimb muscle masses were affected by vibration training. Vibration training in mice improved muscle contractility, specifically strength and relaxation rates, with no indication of adverse effects to muscle function or cellular adaptations.

  12. Calculating thermal radiation of a vibrational nonequilibrium gas flow using the method of k-distribution

    Science.gov (United States)

    Molchanov, A. M.; Bykov, L. V.; Yanyshev, D. S.

    2017-05-01

    The method has been developed to calculate infrared radiation of vibrational nonequilibrium gas based on k-distribution. A comparison of the data on the calculated nonequilibrium radiation with results of other authors and with experimental data has shown satisfactory agreement. It is shown that the results of calculation of radiation intensity using nonequilibrium and equilibrium methods significantly differ from each other. The discrepancy increases with increasing height (decreasing pressure) and can exceed an order of magnitude.

  13. Low intensity, high frequency vibration training to improve musculoskeletal function in a mouse model of Duchenne muscular dystrophy.

    Directory of Open Access Journals (Sweden)

    Susan A Novotny

    Full Text Available The objective of the study was to determine if low intensity, high frequency vibration training impacted the musculoskeletal system in a mouse model of Duchenne muscular dystrophy, relative to healthy mice. Three-week old wildtype (n = 26 and mdx mice (n = 22 were randomized to non-vibrated or vibrated (45 Hz and 0.6 g, 15 min/d, 5 d/wk groups. In vivo and ex vivo contractile function of the anterior crural and extensor digitorum longus muscles, respectively, were assessed following 8 wks of vibration. Mdx mice were injected 5 and 1 days prior to sacrifice with Calcein and Xylenol, respectively. Muscles were prepared for histological and triglyceride analyses and subcutaneous and visceral fat pads were excised and weighed. Tibial bones were dissected and analyzed by micro-computed tomography for trabecular morphometry at the metaphysis, and cortical geometry and density at the mid-diaphysis. Three-point bending tests were used to assess cortical bone mechanical properties and a subset of tibiae was processed for dynamic histomorphometry. Vibration training for 8 wks did not alter trabecular morphometry, dynamic histomorphometry, cortical geometry, or mechanical properties (P ≥ 0.34. Vibration did not alter any measure of muscle contractile function (P ≥ 0.12; however the preservation of muscle function and morphology in mdx mice indicates vibration is not deleterious to muscle lacking dystrophin. Vibrated mice had smaller subcutaneous fat pads (P = 0.03 and higher intramuscular triglyceride concentrations (P = 0.03. These data suggest that vibration training at 45 Hz and 0.6 g did not significantly impact the tibial bone and the surrounding musculature, but may influence fat distribution in mice.

  14. Various performance-enhancing effects from the same intensity of whole-body vibration training

    Directory of Open Access Journals (Sweden)

    Paohung Chung

    2017-09-01

    Conclusion: All frequency and amplitude settings in the 8-week whole-body vibration training increased muscle strength, but different settings resulted in various neuromuscular adaptations despite the same intensity.

  15. Low-Intensity Vibration as a Treatment for Traumatic Muscle Injury

    Science.gov (United States)

    2015-08-01

    that LIV reduces fibrosis and enhances muscle fiber growth following traumatic muscle injury in mice. Our data also indicate that LIV increases numbers...1 AWARD NUMBER: W81XWH-14-1-0281 TITLE: Low-Intensity Vibration as a Treatment for Traumatic Muscle Injury PRINCIPAL INVESTIGATOR: Dr...2. REPORT TYPE Annual 3. DATES COVERED 08/01/2014-07/31/2015 4. TITLE AND SUBTITLE Low-Intensity Vibration as a Treatment for Traumatic Muscle

  16. Long Range Dependence Prognostics for Bearing Vibration Intensity Chaotic Time Series

    Directory of Open Access Journals (Sweden)

    Qing Li

    2016-01-01

    Full Text Available According to the chaotic features and typical fractional order characteristics of the bearing vibration intensity time series, a forecasting approach based on long range dependence (LRD is proposed. In order to reveal the internal chaotic properties, vibration intensity time series are reconstructed based on chaos theory in phase-space, the delay time is computed with C-C method and the optimal embedding dimension and saturated correlation dimension are calculated via the Grassberger–Procaccia (G-P method, respectively, so that the chaotic characteristics of vibration intensity time series can be jointly determined by the largest Lyapunov exponent and phase plane trajectory of vibration intensity time series, meanwhile, the largest Lyapunov exponent is calculated by the Wolf method and phase plane trajectory is illustrated using Duffing-Holmes Oscillator (DHO. The Hurst exponent and long range dependence prediction method are proposed to verify the typical fractional order features and improve the prediction accuracy of bearing vibration intensity time series, respectively. Experience shows that the vibration intensity time series have chaotic properties and the LRD prediction method is better than the other prediction methods (largest Lyapunov, auto regressive moving average (ARMA and BP neural network (BPNN model in prediction accuracy and prediction performance, which provides a new approach for running tendency predictions for rotating machinery and provide some guidance value to the engineering practice.

  17. [Short-term memory characteristics of vibration intensity tactile perception on human wrist].

    Science.gov (United States)

    Hao, Fei; Chen, Li-Juan; Lu, Wei; Song, Ai-Guo

    2014-12-25

    In this study, a recall experiment and a recognition experiment were designed to assess the human wrist's short-term memory characteristics of tactile perception on vibration intensity, by using a novel homemade vibrotactile display device based on the spatiotemporal combination vibration of multiple micro vibration motors as a test device. Based on the obtained experimental data, the short-term memory span, recognition accuracy and reaction time of vibration intensity were analyzed. From the experimental results, some important conclusions can be made: (1) The average short-term memory span of tactile perception on vibration intensity is 3 ± 1 items; (2) The greater difference between two adjacent discrete intensities of vibrotactile stimulation is defined, the better average short-term memory span human wrist gets; (3) There is an obvious difference of the average short-term memory span on vibration intensity between the male and female; (4) The mechanism of information extraction in short-term memory of vibrotactile display is to traverse the scanning process by comparison; (5) The recognition accuracy and reaction time performance of vibrotactile display compares unfavourably with that of visual and auditory. The results from this study are important for designing vibrotactile display coding scheme.

  18. Does Concurrent Training Intensity Distribution Matter?

    Science.gov (United States)

    Varela-Sanz, Adrián; Tuimil, José L; Abreu, Laurinda; Boullosa, Daniel A

    2017-01-01

    Varela-Sanz, A, Tuimil, JL, Abreu, L, and Boullosa, DA. Does concurrent training intensity distribution matter? J Strength Cond Res 31(1): 181-195, 2017-Previous research has demonstrated the influence of intensity distribution on endurance training adaptations. However, no study has addressed the influence of intensity distribution on the effectiveness of concurrent training (CT). The main objective of this study was to compare the effects of 2 CT programs with different training intensity distribution and externally equated loads on physical fitness. Thirty-one sport science students volunteered and were evaluated for resting heart rate variability (HRV), countermovement jump, bench press, half squat, and maximum aerobic speed (MAS). All were randomly distributed into either a traditional-based training group (TT; n = 11; 65-75% of MAS, combined with 10-12 repetition maximum [RM]), polarized training group (PT; n = 10; 35-40% and 120% of MAS, combined with 5RM and 15RM), or control group (CG; n = 10). After 8 weeks of training (3 daysweek), TT and PT exhibited similar improvements in MAS, bench press, and half squat performances. No differences were observed between TT and PT groups for perceived loads. There were no changes in HRV for any group, although TT exhibited a reduction in resting heart rate. Compared with other groups, the PT group maintained jump capacity with an increment in body mass and body mass index without changes in body fatness. In conclusion, PT induced similar improvements in physical fitness of physically active individuals when compared with TT. However, PT produced a lower interference for jumping capacity despite an increment in body mass, whereas TT induced greater bradycardia. Extended studies with different intensity distributions should be conducted to better determine the dose-response of CT in various populations.

  19. Transverse Beam Halo Measurements at High Intensity Neutrino Source (HINS) using Vibrating Wire Monitor

    Energy Technology Data Exchange (ETDEWEB)

    Chung, M.; Hanna, B.; Scarpine, V.; Shiltsev, V.; Steimel, J.; Artinian, S.; Arutunian, S.

    2015-02-26

    The measurement and control of beam halos will be critical for the applications of future high-intensity hadron linacs. In particular, beam profile monitors require a very high dynamic range when used for the transverse beam halo measurements. In this study, the Vibrating Wire Monitor (VWM) with aperture 60 mm was installed at the High Intensity Neutrino Source (HINS) front-end to measure the transverse beam halo. A vibrating wire is excited at its resonance frequency with the help of a magnetic feedback loop, and the vibrating and sensitive wires are connected through a balanced arm. The sensitive wire is moved into the beam halo region by a stepper motor controlled translational stage. We study the feasibility of the vibrating wire for the transverse beam halo measurements in the low-energy front-end of the proton linac.

  20. Product vibrational distributions in CH 3Br photodissociation

    Science.gov (United States)

    Escure, Christelle; Leininger, Thierry; Lepetit, Bruno

    2009-09-01

    We performed a theoretical study of the photodissociation dynamics of CH 3Br in the A˜ band using a wavepacket propagation technique on coupled ab initio potential energy surfaces corresponding to the 3Q 1 and 1Q 1 states correlated at large distance with the Br ground spin-orbit state, as well as the 3Q 0 and 4E states correlated to the excited one. The methyl umbrella vibrational product state distributions are found in very good agreement with experimental results. They are hotter for Br than for Br ∗, and this is related to the shapes of the 3Q 0 and 1Q 1 potentials.

  1. Low-Intensity Vibration as a Treatment for Traumatic Muscle Injury

    Science.gov (United States)

    2017-08-01

    contralateral leg. iii. We have completed histological analysis of muscles harvested on day 23 post -injury from both LIV-treated and sham-treated mice. a. No...AWARD NUMBER: W81XWH-14-1-0281 TITLE: Low-Intensity Vibration as a Treatment for Traumatic Muscle Injury PRINCIPAL INVESTIGATOR: Dr...Intensity Vibration as a Treatment for Traumatic Muscle Injury 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH-14-1-0281 5c. PROGRAM ELEMENT NUMBER 6

  2. A modal approach to modeling spatially distributed vibration energy dissipation.

    Energy Technology Data Exchange (ETDEWEB)

    Segalman, Daniel Joseph

    2010-08-01

    The nonlinear behavior of mechanical joints is a confounding element in modeling the dynamic response of structures. Though there has been some progress in recent years in modeling individual joints, modeling the full structure with myriad frictional interfaces has remained an obstinate challenge. A strategy is suggested for structural dynamics modeling that can account for the combined effect of interface friction distributed spatially about the structure. This approach accommodates the following observations: (1) At small to modest amplitudes, the nonlinearity of jointed structures is manifest primarily in the energy dissipation - visible as vibration damping; (2) Correspondingly, measured vibration modes do not change significantly with amplitude; and (3) Significant coupling among the modes does not appear to result at modest amplitudes. The mathematical approach presented here postulates the preservation of linear modes and invests all the nonlinearity in the evolution of the modal coordinates. The constitutive form selected is one that works well in modeling spatially discrete joints. When compared against a mathematical truth model, the distributed dissipation approximation performs well.

  3. Vibrationally cold CO{sup 2+} probed by intense femtosecond laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    McKenna, J; Sayler, A M; Gaire, B; Johnson, Nora G; Zohrabi, M; Anis, F; Carnes, K D; Esry, B D; Ben-Itzhak, I [J. R. Macdonald Laboratory, Physics Department, Kansas State University, Manhattan, Kansas 66506 (United States); Lev, U, E-mail: ibi@phys.ksu.ed [Department of Particle Physics, Weizmann Institute of Science, Rehovot, 76100 (Israel)

    2009-11-01

    Using a novel approach, we produce a vibrationally cold CO{sup 2+} beam for study in an intense ultrashort laser field. We observe perpendicular dissociation of the simple two-level CO v = 0 ion, and above-threshold dissociation peaks spaced by the photon energy.

  4. Prediction of absolute infrared intensities for the fundamental vibrations of H2O2

    Science.gov (United States)

    Rogers, J. D.; Hillman, J. J.

    1981-01-01

    Absolute infrared intensities are predicted for the vibrational bands of gas-phase H2O2 by the use of a hydrogen atomic polar tensor transferred from the hydroxyl hydrogen atom of CH3OH. These predicted intensities are compared with intensities predicted by the use of a hydrogen atomic polar tensor transferred from H2O. The predicted relative intensities agree well with published spectra of gas-phase H2O2, and the predicted absolute intensities are expected to be accurate to within at least a factor of two. Among the vibrational degrees of freedom, the antisymmetric O-H bending mode nu(6) is found to be the strongest with a calculated intensity of 60.5 km/mole. The torsional band, a consequence of hindered rotation, is found to be the most intense fundamental with a predicted intensity of 120 km/mole. These results are compared with the recent absolute intensity determinations for the nu(6) band.

  5. The effect of large amplitude motions on the vibrational intensities in hydrogen bonded complexes

    DEFF Research Database (Denmark)

    Mackeprang, Kasper; Hänninen, Vesa; Halonen, Lauri

    2015-01-01

    We have developed a model to calculate accurately the intensity of the hydrogen bonded XH-stretching vibrational transition in hydrogen bonded complexes. In the Local Mode Perturbation Theory (LMPT) model, the unperturbed system is described by a local mode (LM) model, which is perturbed...... by the intermolecular modes of the hydrogen bonded system that couple with the intramolecular vibrations of the donor unit through the potential energy surface. We have applied the model to three complexes containing water as the donor unit and different acceptor units, providing a series of increasing complex binding...... of the fundamental hydrogen bonded OH-stretching transition relative to the simpler LM model....

  6. Vibration analysis of continuous maglev guideways with a moving distributed load model

    Science.gov (United States)

    Teng, N. G.; Qiao, B. P.

    2008-02-01

    A model of moving distributed load with a constant speed is established for vertical vibration analysis of a continuous guideway in maglev transportation system. The guideway is considered as a continuous structural system and the action of maglev vehicles on guideways is considered as a moving distributed load. Vibration of the continuous guideways used in Shanghai maglev line is analyzed with this model. The factors that affect the vibration of the guideways, such as speeds, guideway's spans, frequency and damping, are discussed.

  7. Distributed measurement of acoustic vibration location with frequency multiplexed phase-OTDR

    Science.gov (United States)

    Iida, Daisuke; Toge, Kunihiro; Manabe, Tetsuya

    2017-07-01

    All-fiber distributed vibration sensing is attracting attention in relation to structural health monitoring because it is cost effective, offers high coverage of the monitored area and can detect various structural problems. And in particular the demand for high-speed vibration sensing operating at more than 10 kHz has increased because high frequency vibration indicates high energy and severe trouble in the monitored object. Optical fiber vibration sensing with phase-sensitive optical time domain reflectometry (phase-OTDR) has long been studied because it can be used for distributed vibration sensing in optical fiber. However, pulse reflectometry such as OTDR cannot measure high-frequency vibration whose cycle is shorter than the repetition time of the OTDR. That is, the maximum detectable frequency depends on fiber length. In this paper, we describe a vibration sensing technique with frequency-multiplexed OTDR that can detect the entire distribution of a high-frequency vibration thus allowing us to locate a high-speed vibration point. We can measure the position, frequency and dynamic change of a high-frequency vibration whose cycle is shorter than the repetition time. Both frequency and position are visualized simultaneously for a 5-km fiber with an 80-kHz frequency response and a 20-m spatial resolution.

  8. A novel vision-based mold monitoring system in an environment of intense vibration

    Science.gov (United States)

    Hu, Fen; He, Zaixing; Zhao, Xinyue; Zhang, Shuyou

    2017-10-01

    Mold monitoring has been more and more widely used in the modern manufacturing industry, especially when based on machine vision, but these systems cannot meet the detection speed and accuracy requirements for mold monitoring because they must operate in environments that exhibit intense vibration during production. To ensure that the system runs accurately and efficiently, we propose a new descriptor that combines the geometric relationship-based global context feature and the local scale-invariant feature transform for the image registration step of the mold monitoring system. The experimental results of four types of molds showed that the detection accuracy of the mold monitoring system is improved in the environment with intense vibration.

  9. Accurate acoustic power measurement for low-intensity focused ultrasound using focal axial vibration velocity

    Science.gov (United States)

    Tao, Chenyang; Guo, Gepu; Ma, Qingyu; Tu, Juan; Zhang, Dong; Hu, Jimin

    2017-07-01

    Low-intensity focused ultrasound is a form of therapy that can have reversible acoustothermal effects on biological tissue, depending on the exposure parameters. The acoustic power (AP) should be chosen with caution for the sake of safety. To recover the energy of counteracted radial vibrations at the focal point, an accurate AP measurement method using the focal axial vibration velocity (FAVV) is proposed in explicit formulae and is demonstrated experimentally using a laser vibrometer. The experimental APs for two transducers agree well with theoretical calculations and numerical simulations, showing that AP is proportional to the square of the FAVV, with a fixed power gain determined by the physical parameters of the transducers. The favorable results suggest that the FAVV can be used as a valuable parameter for non-contact AP measurement, providing a new strategy for accurate power control for low-intensity focused ultrasound in biomedical engineering.

  10. Relative vibrational overtone intensity of cis-cis and trans-perp peroxynitrous acid

    Science.gov (United States)

    Matthews, Jamie; Sinha, Amitabha; Francisco, Joseph S.

    2004-06-01

    The vibrational overtone spectrum of HOONO is examined in the region of the 2νOH and 3νOH bands using action spectroscopy in conjunction with ab initio intensity calculations. The present measurements indicate that the oscillator strength associated with the higher energy trans-perp conformer of HOONO is stronger relative to the lower energy cis-cis conformer for both these vibrational overtone levels. Ab initio intensity calculations carried out at the QCISD level of theory suggest that this disparity in oscillator strength apparently arises from differences in the second derivative of the transition dipole moment function of the two isomers. The calculations indicate that the oscillator strength for the trans-perp isomer is ˜5.4 times larger than that of the cis-cis isomer for the 2νOH band and ˜2 times larger for 3νOH band. The band positions and intensities predicted by the calculations are used to aid in the assignment of features in the experimental action spectra associated with the OH stretching overtones of HOONO. The observed relative intensities in the experimental action spectra when normalized to the calculated oscillator strengths appears to suggest that the concentration of the higher energy trans-perp isomer is comparable to the concentration of the cis-cis isomer in these room temperature experiments.

  11. Distributed vibration sensing on optical fibre: field testing in borehole seismic applications

    Science.gov (United States)

    Frignet, B.; Hartog, A. H.; Mackie, D.; Kotov, O. I.; Liokumovich, L. B.

    2014-05-01

    We describe the measurement of seismic waves in a borehole using distributed vibration sensing conveyed on wireline cable. The optical measurement is compared directly with the results of a multi-level borehole seismic survey with conventional electrical accelerometers.

  12. Vibration analysis of continuous maglev guideways with a moving distributed load model

    Energy Technology Data Exchange (ETDEWEB)

    Teng, N G; Qiao, B P [Department of Civil Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240 (China)

    2008-02-15

    A model of moving distributed load with a constant speed is established for vertical vibration analysis of a continuous guideway in maglev transportation system. The guideway is considered as a continuous structural system and the action of maglev vehicles on guideways is considered as a moving distributed load. Vibration of the continuous guideways used in Shanghai maglev line is analyzed with this model. The factors that affect the vibration of the guideways, such as speeds, guideway's spans, frequency and damping, are discussed.

  13. Densities and vibrational distribution of H(3+) in the Jovian auroral ionosphere

    Science.gov (United States)

    Kim, Y. H.; Fox, J. L.; Porter, H. S.

    1992-01-01

    The assumption that H(3+) is in LTE in the region of the Jovian ionosphere from which the emissions originate is tested by calculating the vibrational distribution of H(3+) over the altitude range of 350 to 1500 km above the methane cloud tops. A model of the Jovian auroral ionosphere is constructed in which the neutral temperatures are enhanced over those of the midlatitude ionosphere, as suggested by observations and models of the auroral region. The energy and energy flux were found to be less than those involved in the production of the UV aurora. A computation of the densities and vibrational distribution shows that the distribution of the six lowest states of H(3+) can be determined fairly well in spite of uncertainties in the atomic and molecular data. The computed altitude profiles and vibrational distributions of H(3+) and H2 are consistent with the observations of IR emission in the 2- and 4-micron regions.

  14. A distributed fiber vibration sensor utilizing dispersion induced walk-off effect in a unidirectional Mach-Zehnder interferometer.

    Science.gov (United States)

    Chen, Qingming; Jin, Chao; Bao, Yuan; Li, Zhaohui; Li, Jianping; Lu, Chao; Yang, Liang; Li, Guifang

    2014-02-10

    We propose and experimentally demonstrate a novel ultra-long range and sensitive distributed fiber vibration sensor. Only one unidirectional Mach-Zehnder interferometer (MZI) is employed in this scheme as the sensing element. In this sensor structure, we utilize chromatic dispersion-induced walk-off effect between the vibration signals sensed by two distributed feedback (DFB) lasers at different wavelengths to locate the vibration position. Vibration signals with frequencies up to 9 MHz can be detected and the spatial resolution of 31 m is achieved over 320 km of the standard single mode fiber. Monitoring multiple vibration sources can also be realized using this scheme.

  15. A unified solution for vibration analysis of plates with general structural stress distributions

    Directory of Open Access Journals (Sweden)

    Nian Yang

    2016-11-01

    Full Text Available Complex stress distributions often exist in ocean engineering structures. This stress influences structural vibrations. Finite Element Methods exhibit some shortcomings for solving non-uniform stress problems, such as an unclear physical interpretation, complicated operation, and large number of computations. Analytical methods research considers mainly uniform stress problems, and often, their methods cannot be applied in practical marine structures with non-uniform stress. In this paper, an analytical method is proposed to solve the vibration of plates with general stress distributions. Non-uniform stress is expressed as a special series, and the stress influence is inserted into a vibration equation that is solved through decoupling to obtain an analytical solution. This method has been verified using numerical examples and can be used in arbitrary stress distribution cases. This method requires fewer computations and it provides a clearer physical interpretation, so it has advantages in some qualitative research.

  16. Distribution Channel Intensity among Table Water Producers in Nigeria

    Directory of Open Access Journals (Sweden)

    Joseph Edewor Agbadudu

    2017-09-01

    Full Text Available Planning for and making reasonable decisions regarding reaching the target market with an organization’s product is a critical task on the part of management, which involves a careful evaluation and selection of its channel structure and intensity.This study therefore examines distribution channel intensity among table water producers in Edo State, Nigeria. The focus of the study is to ascertain the variables that significantly predict distribution intensity among the firms in the table water industry in Edo State. The study seeks to proffer answer to fundamental question of why brands within a single category of a given consumer good differ significantly in their distribution intensity. Using a survey research design, the data used for this study were obtained by taking a sample of 110 table water firms within the three senatorial districts in the State. The data obtained were presented and analyzed using different statistical tools such as mean and multiple regression through Statistical Packages for Social Sciences (SPSS version 22 software. Findings revealed that manufacturers’ target focus, manufacturers’ support program, brand quality and level of firm’s technological advancement were significant predictors of distribution channel intensity among the industrial players in table water industry in the State. Based on the findings, the study recommended that table water firms within the State can secure a competitive edge over their fellow counterpart in the industry by designing an optimal distribution intensity that will meet up their marketing objectives. It is also recommended that the adoption of modern technology in form of online sales is an efficient way of sales and distribution which could be used to enhance their distribution techniques if there is a need to cut down on middle men due to increased cost. The study concluded that optimal distribution intensity could be achieved not by mere imitation of competitors but through

  17. Vibronic coupling in the superoxide anion: the vibrational dependence of the photoelectron angular distribution.

    Science.gov (United States)

    Van Duzor, Matthew; Mbaiwa, Foster; Wei, Jie; Singh, Tulsi; Mabbs, Richard; Sanov, Andrei; Cavanagh, Steven J; Gibson, Stephen T; Lewis, Brenton R; Gascooke, Jason R

    2010-11-07

    We present a comprehensive photoelectron imaging study of the O(2)(X  (3)Σ(g)(-),v(')=0-6)←O(2)(-)(X  (2)Π(g),v(")=0) and O(2)(a (1)Δ(g),v(')=0-4)←O(2)(-)(X  (2)Π(g),v(")=0) photodetachment bands at wavelengths between 900 and 455 nm, examining the effect of vibronic coupling on the photoelectron angular distribution (PAD). This work extends the v(')=1-4 data for detachment into the ground electronic state, presented in a recent communication [R. Mabbs, F. Mbaiwa, J. Wei, M. Van Duzor, S. T. Gibson, S. J. Cavanagh, and B. R. Lewis, Phys. Rev. A 82, 011401(R) (2010)]. Measured vibronic intensities are compared to Franck-Condon predictions and used as supporting evidence of vibronic coupling. The results are analyzed within the context of the one-electron, zero core contribution (ZCC) model [R. M. Stehman and S. B. Woo, Phys. Rev. A 23, 2866 (1981)]. For both bands, the photoelectron anisotropy parameter variation with electron kinetic energy, β(E), displays the characteristics of photodetachment from a d-like orbital, consistent with the π(g)(∗) 2p highest occupied molecular orbital of O(2)(-). However, differences exist between the β(E) trends for detachment into different vibrational levels of the X  (3)Σ(g)(-) and a (1)Δ(g) electronic states of O(2). The ZCC model invokes vibrational channel specific "detachment orbitals" and attributes this behavior to coupling of the electronic and nuclear motion in the parent anion. The spatial extent of the model detachment orbital is dependent on the final state of O(2): the higher the neutral vibrational excitation, the larger the electron binding energy. Although vibronic coupling is ignored in most theoretical treatments of PADs in the direct photodetachment of molecular anions, the present findings clearly show that it can be important. These results represent a benchmark data set for a relatively simple system, upon which to base rigorous tests of more sophisticated models.

  18. Spectral intensities in cubic systems. I. Progressions based upon parity vibrational modes

    Energy Technology Data Exchange (ETDEWEB)

    Acevedo, R.; Vasquez, S.O. [Department of Basic Chemistry, Faculty of Physical and Mathematical Sciences, University of Chile. Tupper 2069, Casilla 2777, Santiago, Chile (Chile); Meruane, T. [Department of Chemistry, Universidad Metropolitana de Ciencias de la Educacion. Av. J.P. Alessandri 774, Casilla 147, C. Santiago, Chile (Chile); Poblete, V. [Department of Nuclear Materials, Lo Aguirre, Comision Chilena de Energia Nuclear. Amunategui 95, Casilla 188-D, Santiago, Chile (Chile); Pozo, J. [Facultad de Ciencias de la Ingenieria. Universidad Diego Portales. Casilla 298-V, Santiago, Chile (Chile)

    1998-12-01

    The well-resolved emission and absorption spectra of centrosymmetric coordination compounds of the transition metal ions have been used widely to provide the experimental data against which to test theoretical models of vibronic intensities. With reference to the {sup 2} E{sub g} {yields} {sup 4} A{sub 2g} luminescence transition, at a perfect octahedral site in Cs{sub 2}SiF{sub 6}, over than one hundred vibronic lines are observed with line widths of a few wavenumber spread over some 3000 cm{sup -1}. This paper reports a through examination of both the electronic and vibrational factors, which influences the observed vibronic intensities of the various assigned and identified lines in the spectra of the MnF{sub 6} {sup 2-} complex ion in the Cs{sub 2}SiF{sub 6} cubic lattice. The origin and nature of higher order vibronic interactions are analysed on the basis of a symmetrized vibronic crystal field-ligand polarization model. (Author)

  19. S-matrix analysis of vibrational and alignment effects in intense-field multiphoton ionization of molecules

    Energy Technology Data Exchange (ETDEWEB)

    Requate, A.

    2007-03-15

    Theoretical analysis of the vibrational excitation of small molecules during multiphoton ionization in intense laser fields of optical and infrared frequencies. Analysis of the alignment dependence of the electron impact ionization of diatomic molecules in the presence of an intense laser field as the final step in the process of Nonsequential Double Ionization. Quantum mechanical description using S-matrix theory in Strong Field Approximation (SFA), i.e. beyond perturbation theory. (orig.)

  20. Predicting the distribution of intensive poultry farming in Thailand.

    Science.gov (United States)

    Van Boeckel, Thomas P; Thanapongtharm, Weerapong; Robinson, Timothy; D'Aietti, Laura; Gilbert, Marius

    2012-03-01

    Intensification of animal production can be an important factor in the emergence of infectious diseases because changes in production structure influence disease transmission patterns. In 2004 and 2005, Thailand was subject to two highly pathogenic avian influenza epidemic waves and large surveys were conducted of the poultry sector, providing detailed spatial data on various poultry types. This study analysed these data with the aim of establishing the distributions of extensive and intensive poultry farms, based on the number of birds per holder. Once poultry data were disaggregated into these two production systems, they were analysed in relation to anthropogenic factors using simultaneous autoregressive models. Intensive chicken production was clustered around the capital city of Bangkok and close to the main consumption and export centres. Intensively-raised ducks, mainly free-grazing, showed a distinct pattern with the highest densities distributed in a large area located in the floodplain of the Chao Phraya River. Accessibility to Bangkok, the percentage of irrigated areas and human population density were the most important predictors explaining the geographical distribution of intensively-raised poultry. The distribution of extensive poultry showed a higher predictability. Extensive poultry farms were distributed more homogeneously across the country and their distribution was best predicted by human population density.

  1. Nightglow vibrational distributions in the A3Σu+ and A'3Δu states of O2 derived from astronomical sky spectra

    Directory of Open Access Journals (Sweden)

    T. G. Slanger

    2004-09-01

    Full Text Available Astronomical sky spectra from the Keck I telescope on Mauna Kea have been used to obtain vibrational distributions in the O2A3Σu+ and O2(A'3Δu states from rotationally-resolved Herzberg I and Chamberlain band emissions in the terrestrial nightglow. The A3Σu+ distribution is similar to that presented in earlier publications, with the exception that there is significant population in the previously undiscerned v=0 level. The vibrational distributions of the A'3Δu and A3Σu+ states are essentially the same when comparison is made in terms of the level energies. The intensity of Chamberlain band emission at the peak of the distribution is about one-fourth that of the Herzberg I emission, as previously shown, and may be related primarily to radiative efficiency. The peaks in both population distributions are about 0.25eV below the O(3P+O(3P dissociation limit. We compare these Herzberg state distributions with that of the O2(b1Σg+ state, concurring with others that the intense nightglow emission associated with b1Σg+(v=0 is a reflection of direct transfer from the Herzberg states. This process takes place following O2 collisions, with simultaneous production of very high a1Δg and b1Σg+ vibrational levels.

  2. Vibration suppression for strings with distributed loading using spatial cross-section modulation

    DEFF Research Database (Denmark)

    Sorokin, Vladislav; Thomsen, Jon Juel

    2015-01-01

    A problem of vibration suppression in any preassigned region of a bounded structure subjected to action of an external time-periodic load which is distributed over its domain is considered. A passive control is applied, in which continuous spatially periodic modulations of structural parameters a...

  3. Adhesive capsulitis of the shoulder: pain intensity and distribution.

    Science.gov (United States)

    Candela, V; Giannicola, G; Passaretti, D; Venditto, T; Gumina, S

    2017-12-01

    Papers regarding adhesive capsulitis (AC) of the shoulder focused on etiology, epidemiology, diagnosis, and treatment; until now, information on shoulder pain characteristics is still scarce. Our aim was to analyze pain intensity and distribution in patients with AC. The study group was composed of 278 (133M-145F) consecutive patients with AC. After diagnosis, shoulder pain distribution was assessed through an upper limb pain map and pain intensity through a visual analog scale. Patients were distinguished on the basis of gender, age, time elapsed from onset of symptoms, and severity of functional limitation. Data were submitted to statistical analysis. Intensity of shoulder pain caused by AC was higher in females (p pain arose from more than 3 months suffered a lower intensity of shoulder pain. Furthermore, pain intensity was higher in the most severe form of AC (active forward flexion Pain was localized predominantly on the anterior aspect of the shoulder (dermatomes C5-C6) and rarely extended beyond the distal third of the arm. No differences were found in pain distribution between male and female, between patients with pain from less or more than 3 months and between different levels of AC severity (p > 0.05). Shoulder pain due to AC may be influenced by gender and severity of functional limitation. AC pain distribution principally involves anterior aspect of the shoulder with downward extension of the arm until its distal third. Level IV.

  4. Effect of whole body vibration on lactate level recovery and heart rate recovery in rest after intense exercise.

    Science.gov (United States)

    Kang, Seung Rok; Min, Jin-Young; Yu, Changho; Kwon, Tae-Kyu

    2017-07-20

    In this paper, we investigated the recovery of the lactate level, muscular fatigue, and heart rate recovery (HRR) with respect to whole body vibration (WBV) during the rest stage after a gait exercise. A total of 24 healthy subjects with no medical history of exercise injury participated. The participants were divided into a training group with vibration during rest and a control group with the same conditions but without vibration. The subjects performed a gait exercise with a slope of 15% and velocity of 4 km/h to consume 450 kcal in 30 min. Then, they rested on a vibrating chair or on a chair without vibrations for 30 min. The vibration protocol consists of a frequency of 10 Hz and amplitude of 5 mm. To estimate the recovery effect, we measured the lactate levels in blood, spectral edge frequency (SEF) of MVIC, and HRR before, immediately after exercise, and after rest. The results showed that the lactate level in the training group decreased more (93.8%) than in the control group (32.8%). Also, HRR showed a similar trend with a recovery of 88.39% in the training group but 64.72% in the control group. We considered that whole-body vibrations during rest would help remove lactic acid by improving the level of lactic acid oxidation with stimulated blood vessels in the muscles and by helping to maintain blood flow. Also, WBV would lead to compensation to actively decrease the fast excess post-exercise oxygen consumption from blood circulation. We suggest that whole-body vibrations during rest can provide fast, efficient fatigue recovery as a cool down exercise for women, the elderly, and patients without other activity after intense exercise.

  5. Gap junctional communication in osteocytes is amplified by low intensity vibrations in vitro.

    Directory of Open Access Journals (Sweden)

    Gunes Uzer

    Full Text Available The physical mechanism by which cells sense high-frequency mechanical signals of small magnitude is unknown. During exposure to vibrations, cell populations within a bone are subjected not only to acceleratory motions but also to fluid shear as a result of fluid-cell interactions. We explored displacements of the cell nucleus during exposure to vibrations with a finite element (FE model and tested in vitro whether vibrations can affect osteocyte communication independent of fluid shear. Osteocyte like MLO-Y4 cells were subjected to vibrations at acceleration magnitudes of 0.15 g and 1 g and frequencies of 30 Hz and 100 Hz. Gap junctional intracellular communication (GJIC in response to these four individual vibration regimes was investigated. The FE model demonstrated that vibration induced dynamic accelerations caused larger relative nuclear displacement than fluid shear. Across the four regimes, vibrations significantly increased GJIC between osteocytes by 25%. Enhanced GJIC was independent of vibration induced fluid shear; there were no differences in GJIC between the four different vibration regimes even though differences in fluid shear generated by the four regimes varied 23-fold. Vibration induced increases in GJIC were not associated with altered connexin 43 (Cx43 mRNA or protein levels, but were dependent on Akt activation. Combined, the in silico and in vitro experiments suggest that externally applied vibrations caused nuclear motions and that large differences in fluid shear did not influence nuclear motion (<1% or GJIC, perhaps indicating that vibration induced nuclear motions may directly increase GJIC. Whether the increase in GJIC is instrumental in modulating anabolic and anti-catabolic processes associated with the application of vibrations remains to be determined.

  6. Foliage Density Distribution and Prediction of Intensively Managed Loblolly Pine

    Science.gov (United States)

    Yujia Zhang; Bruce E. Borders; Rodney E. Will; Hector De Los Santos Posadas

    2004-01-01

    The pipe model theory says that foliage biomass is proportional to the sapwood area at the base of the live crown. This knowledge was incorporated in an effort to develop a foliage biomass prediction model from integrating a stipulated foliage biomass distribution function within the crown. This model was parameterized using data collected from intensively managed...

  7. Deconvolving Single-Molecule Intensity Distributions for Quantitative Microscopy Measurements

    Science.gov (United States)

    Mutch, Sarah A.; Fujimoto, Bryant S.; Kuyper, Christopher L.; Kuo, Jason S.; Bajjalieh, Sandra M.; Chiu, Daniel T.

    2007-01-01

    In fluorescence microscopy, images often contain puncta in which the fluorescent molecules are spatially clustered. This article describes a method that uses single-molecule intensity distributions to deconvolve the number of fluorophores present in fluorescent puncta as a way to “count” protein number. This method requires a determination of the correct statistical relationship between the single-molecule and single-puncta intensity distributions. Once the correct relationship has been determined, basis histograms can be generated from the single-molecule intensity distribution to fit the puncta distribution. Simulated data were used to demonstrate procedures to determine this relationship, and to test the methodology. This method has the advantages of single-molecule measurements, providing both the mean and variation in molecules per puncta. This methodology has been tested with the avidin-biocytin binding system for which the best-fit distribution of biocytins in the sample puncta was in good agreement with a bulk determination of the avidin-biocytin binding ratio. PMID:17259276

  8. Assessing a Tornado Climatology from Global Tornado Intensity Distributions

    OpenAIRE

    Feuerstein, B.; Dotzek, N.; Grieser, J.

    2005-01-01

    Recent work demonstrated that the shape of tornado intensity distributions from various regions worldwide is well described by Weibull functions. This statistical modeling revealed a strong correlation between the fit parameters c for shape and b for scale regardless of the data source. In the present work it is shown that the quality of the Weibull fits is optimized if only tornado reports of F1 and higher intensity are used and that the c–b correlation does indeed reflect a universal featur...

  9. Imaging study of vibrational predissociation of the HCl-acetylene dimer: pair-correlated distributions.

    Science.gov (United States)

    Li, Guosheng; Parr, Jessica; Fedorov, Igor; Reisler, Hanna

    2006-07-07

    The state-to-state predissociation dynamics of the HCl-acetylene dimer were studied following excitation in the asymmetric C-H (asym-CH) stretch and the HCl stretch. Velocity map imaging (VMI) and resonance enhanced multiphoton ionization (REMPI) were used to determine pair-correlated product energy distributions. Different vibrational predissociation mechanisms were observed for the two excited vibrational levels. Following excitation in the of the asym-CH stretch fundamental, HCl fragments in upsilon = 0 and j = 4-7 were observed and no HCl in upsilon = 1 was detected. The fragments' center-of-mass (c.m.) translational energy distributions were derived from images of HCl (j = 4-7), and were converted to rotational state distributions of the acetylene co-fragment by assuming that acetylene is generated with one quantum of C-C stretch (nu(2)) excitation. The acetylene pair-correlated rotational state distributions agree with the predictions of the statistical phase space theory, restricted to acetylene fragments in 1nu(2). It is concluded that the predissociation mechanism is dominated by the initial coupling of the asym-CH vibration to a combination of C-C stretch and bending modes in the acetylene moiety. Vibrational energy redistribution (IVR) between acetylene bending and the intermolecular dimer modes leads to predissociation that preserves the C-C stretch excitation in the acetylene product while distributing the rest of the available energy statistically. The predissociation mechanism following excitation in the Q band of the dimer's HCl stretch fundamental was quite different. HCl (upsilon = 0) rotational states up to j = 8 were observed. The rovibrational state distributions in the acetylene co-fragment derived from HCl (j = 6-8) images were non-statistical with one or two quanta in acetylene bending vibrational excitation. From the observation that all the HCl(j) translational energy distributions were similar, it is proposed that there exists a

  10. Assessing a Tornado Climatology from Global Tornado Intensity Distributions.

    Science.gov (United States)

    Feuerstein, Bernold; Dotzek, Nikolai; Grieser, Jürgen

    2005-02-01

    Recent work demonstrated that the shape of tornado intensity distributions from various regions worldwide is well described by Weibull functions. This statistical modeling revealed a strong correlation between the fit parameters c for shape and b for scale regardless of the data source. In the present work it is shown that the quality of the Weibull fits is optimized if only tornado reports of F1 and higher intensity are used and that the c-b correlation does indeed reflect a universal feature of the observed tornado intensity distributions. For regions with likely supercell tornado dominance, this feature is the number ratio of F4 to F3 tornado reports R(F4/F3) = 0.238. The c-b diagram for the Weibull shape and scale parameters is used as a climatological chart, which allows different types of tornado climatology to be distinguished, presumably arising from supercell versus nonsupercell tornadogenesis. Assuming temporal invariance of the climatology and using a detection efficiency function for tornado observations, a stationary climatological probability distribution from large tornado records (U.S. decadal data 1950-99) is extracted. This can be used for risk assessment, comparative studies on tornado intensity distributions worldwide, and estimates of the degree of underreporting for areas with poor databases. For the 1990s U.S. data, a likely tornado underreporting of the weak events (F0, F1) by a factor of 2 can be diagnosed, as well as asymptotic climatological c,b values of c = 1.79 and b = 2.13, to which a convergence in the 1950-99 U.S. decadal data is verified.

  11. Improved Models for Prediction of Locally Intense Aeroacoustic Loads and Vibration Environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ATA Engineering, Inc. proposes an STTR program to develop innovative tools and methods that will significantly improve the accuracy of random vibration response...

  12. Transfrontier macroseismic data exchange in NW Europe: examples of non-circular intensity distributions

    Science.gov (United States)

    Van Noten, Koen; Lecocq, Thomas; Hinzen, Klaus-G.; Sira, Christophe; Camelbeeck, Thierry

    2016-04-01

    Macroseismic data acquisition recently received a strong increase in interest due to public crowdsourcing through internet-based inquiries and real-time smartphone applications. Macroseismic analysis of felt earthquakes is important as the perception of people can be used to detect local/regional site effects in areas without instrumentation. We will demonstrate how post-processing macroseismic data improves the quality of real-time intensity evaluation of new events. Instead of using the classic DYFI representation in which internet intensities are averaged per community, we, first, geocoded all individual responses and structure the model area into 100 km2grid cells. Second, the average intensity of all answers within a grid cell is calculated. The resulting macroseismic grid cell distribution shows a less subjective and more homogeneous intensity distribution than the classical irregular community distribution and helps to improve the calculation of intensity attenuation functions. In this presentation, the 'Did You Feel It' (DYFI) macroseismic data of several >M4, e.g. the 2002 ML 4.9 Alsdorf and 2011 ML 4.3 Goch (Germany) and the 2015 ML 4.1 Ramsgate (UK), earthquakes felt in Belgium, Germany, The Netherlands, France, Luxemburg and UK are analysed. Integration of transfrontier DYFI data of the ROB-BNS, KNMI, BCSF and BGS networks results in a particular non-circular, distribution of the macroseismic data in which the felt area for all these examples extends significantly more in E-W than N-S direction. This intensity distribution cannot be explained by geometrical amplitude attenuation alone, but rather illustrates a low-pass filtering effect due to the south-to-north increasing thickness of cover sediments above the London-Brabant Massif. For the studied M4 to M5 earthquakes, the thick sediments attenuate seismic energy at higher frequencies and consequently less people feel the vibrations at the surface. This example of successful macroseismic data exchange

  13. Comparison of high-intensity sound and mechanical vibration for cleaning porous titanium cylinders fabricated using selective laser melting.

    Science.gov (United States)

    Seiffert, Gary; Hopkins, Carl; Sutcliffe, Chris

    2017-01-01

    Orthopedic components, such as the acetabular cup in total hip joint replacement, can be fabricated using porous metals, such as titanium, and a number of processes, such as selective laser melting. The issue of how to effectively remove loose powder from the pores (residual powder) of such components has not been addressed in the literature. In this work, we investigated the feasibility of two processes, acoustic cleaning using high-intensity sound inside acoustic horns and mechanical vibration, to remove residual titanium powder from selective laser melting-fabricated cylinders. With acoustic cleaning, the amount of residual powder removed was not influenced by either the fundamental frequency of the horn used (75 vs. 230 Hz) or, for a given horn, the number of soundings (between 1 and 20). With mechanical vibration, the amount of residual powder removed was not influenced by the application time (10 vs. 20 s). Acoustic cleaning was found to be more reliable and effective in removal of residual powder than cleaning with mechanical vibration. It is concluded that acoustic cleaning using high-intensity sound has significant potential for use in the final preparation stages of porous metal orthopedic components. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 117-123, 2017. © 2015 The Authors Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc.

  14. Comparison of high‐intensity sound and mechanical vibration for cleaning porous titanium cylinders fabricated using selective laser melting

    Science.gov (United States)

    Seiffert, Gary; Sutcliffe, Chris

    2015-01-01

    Abstract Orthopedic components, such as the acetabular cup in total hip joint replacement, can be fabricated using porous metals, such as titanium, and a number of processes, such as selective laser melting. The issue of how to effectively remove loose powder from the pores (residual powder) of such components has not been addressed in the literature. In this work, we investigated the feasibility of two processes, acoustic cleaning using high‐intensity sound inside acoustic horns and mechanical vibration, to remove residual titanium powder from selective laser melting‐fabricated cylinders. With acoustic cleaning, the amount of residual powder removed was not influenced by either the fundamental frequency of the horn used (75 vs. 230 Hz) or, for a given horn, the number of soundings (between 1 and 20). With mechanical vibration, the amount of residual powder removed was not influenced by the application time (10 vs. 20 s). Acoustic cleaning was found to be more reliable and effective in removal of residual powder than cleaning with mechanical vibration. It is concluded that acoustic cleaning using high‐intensity sound has significant potential for use in the final preparation stages of porous metal orthopedic components. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 117–123, 2017. PMID:26426906

  15. Free Vibrations of a Cantilevered SWCNT with Distributed Mass in the Presence of Nonlocal Effect

    Directory of Open Access Journals (Sweden)

    M. A. De Rosa

    2015-01-01

    Full Text Available The Hamilton principle is applied to deduce the free vibration frequencies of a cantilever single-walled carbon nanotube (SWCNT in the presence of an added mass, which can be distributed along an arbitrary part of the span. The nonlocal elasticity theory by Eringen has been employed, in order to take into account the nanoscale effects. An exact formulation leads to the equations of motion, which can be solved to give the frequencies and the corresponding vibration modes. Moreover, two approximate semianalytical methods are also illustrated, which can provide quick parametric relationships. From a more practical point of view, the problem of detecting the mass of the attached particle has been solved by calculating the relative frequency shift due to the presence of the added mass: from it, the mass value can be easily deduced. The paper ends with some numerical examples, in which the nonlocal effects are thoroughly investigated.

  16. Electron energy and vibrational distribution functions of carbon monoxide in nanosecond atmospheric discharges and microsecond afterglows

    Science.gov (United States)

    Pietanza, L. D.; Colonna, G.; Capitelli, M.

    2017-12-01

    Nanopulse atmospheric carbon monoxide discharges and corresponding afterglows have been investigated in a wide range of applied reduced electric field (130 kinetics of vibrational and electronic excited states as well as to a simplified plasma chemistry for the different species formed during the activation of CO. The molar fraction of electronically excited states generated in the discharge is sufficient to create structures in the EEDF in the afterglow regime. On the other hand, only for long duration pulses (i.e. 50 ns), non-equilibrium vibrational distributions can be observed especially in the afterglow. The trend of the results for the case study E/N = 200 Td, \\text{pulse}=2$ ns is qualitatively and quantitatively similar to the corresponding case for CO2 implying that the activation of CO2 by cold plasmas should take into account the kinetics of formed CO with the same accuracy as the CO2 itself.

  17. Force distribution is more important than its intensity!

    Directory of Open Access Journals (Sweden)

    Alberto Consolaro

    2014-01-01

    Full Text Available A common question about root resorption is raised in orthodontic practice: What is more important, the intensity of force or its distribution along the root, periodontal and alveolar structures? Diffuse distribution of forces applied to periodontal tissues during tooth movement tends not to promote neither extensive areas of cell matrix hyalinization nor significant death of cementoblasts that lead to root resorption. However, focal distribution or concentration of forces within a restricted area - as it occurs in tipping movements, even with forces of lower intensity - tend to induce extensive areas of hyalinization and focal death of cementoblasts, which is commonly associated with root resorption. In tipping movements, the apical regions tend to concentrate more forces in addition to wounding the cementoblasts due to the smaller dimension of their root structure as well as their cone shape. For this reason, there is an increase in root resorption. In the cervical region, on the other hand, the large area resulting from a large diameter and bone crown deflection tends to reduce the effects of forces, even when they are more concentrated, thus rarely inducing death of cementoblasts and root resorption.

  18. Distributed modelling of shallow landslides triggered by intense rainfall

    Directory of Open Access Journals (Sweden)

    G. B. Crosta

    2003-01-01

    Full Text Available Hazard assessment of shallow landslides represents an important aspect of land management in mountainous areas. Among all the methods proposed in the literature, physically based methods are the only ones that explicitly includes the dynamic factors that control landslide triggering (rainfall pattern, land-use. For this reason, they allow forecasting both the temporal and the spatial distribution of shallow landslides. Physically based methods for shallow landslides are based on the coupling of the infinite slope stability analysis with hydrological models. Three different grid-based distributed hydrological models are presented in this paper: a steady state model, a transient "piston-flow" wetting front model, and a transient diffusive model. A comparative test of these models was performed to simulate landslide occurred during a rainfall event (27–28 June 1997 that triggered hundreds of shallow landslides within Lecco province (central Southern Alps, Italy. In order to test the potential for a completely distributed model for rainfall-triggered landslides, radar detected rainfall intensity has been used. A new procedure for quantitative evaluation of distributed model performance is presented and used in this paper. The diffusive model results in the best model for the simulation of shallow landslide triggering after a rainfall event like the one that we have analysed. Finally, radar data available for the June 1997 event permitted greatly improving the simulation. In particular, radar data allowed to explain the non-uniform distribution of landslides within the study area.

  19. Monitoring the intensity of mechanical vibration during the processing of chrome steel 14109

    Directory of Open Access Journals (Sweden)

    Š. Salokyová

    2017-01-01

    Full Text Available Article deals with the examination of the effect of cutting parameters on the occurrence and size of mechanical vibration on three selected measured points during the processing of chrome steel. It also includes execution, experiment evaluation in this field and comparison of measured vibrations acceleration amplitude values according to the standards. The results of the measurement serve for early identification of a defect, which has great effect on the smoothness and efficiency of the machine. The article concludes with the proposed new findings from the measured values evaluation and formulated new recommendations for the operation in production system with lathe turning technology. The measured experimental values of the acceleration amplitude of mechanical vibrations were compared with theoretical values.

  20. Optimum arrangement of seismic intensity monitoring points for immediate estimation system of wide-area distribution of seismic intensity

    Science.gov (United States)

    Furumoto, Yoshinori; Wada, Ayaka; Machida, Tetsu; Watanabe, Taichi; Bong, Michelle

    2017-10-01

    In this paper, the immediate estimation system for wide-area distribution of seismic intensity by using seismic intensity information network system is discussed. In general, although seismic intensity on each seismic intensity monitoring points can be obtained by using seismic intensity information network system within a few minutes after earthquake occurs, wide area distribution of seismic intensity is not obtained. This is because the number of seismic intensity monitoring points on the network system are very few and limited to estimate distribution of seismic intensity. However, by using other information, such as soil profiles on the ground of local areas and attenuation characteristics of seismic intensity, distribution of seismic intensity can be estimated with computer simulation considering seismic wave amplification on the ground immediately after seismic intensity information form the network system is obtained. Especially, array density and optimum arrangement of seismic intensity monitoring points are discussed to estimate efficiently the distribution of seismic intensity in local municipality. Then, the concluded result is that it is effective to place seismic monitoring points in high density populated areas.

  1. Ab initio calculations of anharmonic vibrational circular dichroism intensities of trans-2,3-dideuteriooxirane

    DEFF Research Database (Denmark)

    Bak, KL; Bludsky, O.; Jorgensen, P

    1995-01-01

    A priori theory is derived for anharmonic calculations of vibrational circular dichroism (VCD). The anharmonic VCD expression is gauge origin independent and reduce to the magnetic field perturbation theory expression in the double-harmonic approximation. The theory has been implemented using...... for the atomic axial tensors and using second-order Moller-Plesset theory for the atomic polar tensors and the force fields, The changes of the vibrational rotatory strengths from anharmonicities are small, and do not explain the previously observed large discrepancies between the double-harmonic results...

  2. Precipitation Intensity and Events Distribution Changes in the Extratropics

    Science.gov (United States)

    Knight, R.; Groisman, P. Y.; Zolina, O. G.; Bulygina, O.

    2012-12-01

    More than ten years ago, Groisman et al. (1999) first reported large-scale changes in spectra of precipitation distribution intensity. At the tails of this distribution the frequencies in heavy and very heavy precipitation events have increased over many parts of the extratropics. These increases were disproportionally high in the regions where the precipitation totals increased and were observed even in the regions where the mean rainfall remained unchanged or decreased. Thereafter, this peculiarity of the contemporary precipitation distribution change was substantiated in many regional studies summarized by Groisman and Knight (2013) and will be reported in our presentation. Increases in the frequency of very heavy and extreme precipitation events (with return period of several years and decades respectively) are important for impact studies (assessment of soil erosion, potential of flood) but these events represent a small fraction in annual rainfall totals. Therefore, we analyzed the changes in the mean daily rainfall intensity over the northern extratropics in the regions well elucidated with dense gauge networks (southern Canada, contiguous U.S., Europe, Russia, and Japan). Nearly everywhere, we found systematic increases in daily rainfall totals per day with rain. While increases in very heavy and extreme rainfall intensity are an independent characteristic of the ongoing climatic change, the observed changes in mean precipitation intensity are in line with the ongoing global and regional warming. Duration of the sequences of wet days (prolonged rain events) increased in Europe and Northern Asia, and the duration of the sequences of dry days (prolonged no-rain events) increased over large parts of Northern Eurasia and North America (Zolina et al. 2010; Groisman and Knight 2007; 2013). To describe this feature of the rain events distribution, Zolina et al. (2012) suggested a visual interpretation of wet days as beads on the necklace of the seasonal cycle time

  3. Acid-hemolytic stability of erythrocytes of intense erythropoiesis under conditions of low-frequency vibration

    Directory of Open Access Journals (Sweden)

    O. I. Dotsenko

    2014-04-01

    Full Text Available This paper deals with the peculiarities of functioning of murine erythron system under vibrational stress on the basis of experimental data about erythrocytes acid resistance. Experiments were made on the outbred male mice at about one age and weight that were maintained in vivarium conditions on usual diet. Animals were divided into 5 groups. Animals of 1–4 groups were exposed to daily thirty-minute vibration at frequencies of 8, 16, 24 and 32 Hz respectively, with amplitude of 0.8 ±0.12 mmduring 14 days. Animal exposure to vibration was provided by the electromechanical converter connected to the generator of low frequency signals. The fifth group of animals was not exposed to vibration and it was used as a control. Kinetic dependences of acid hemolysis of erythrocytes was registered daily, from the 1st to the 5th day, and further at the 7th, 9th and 14th days of experiment. Blood for analysis was taken from tail veins in 15–20 min after stopping of vibration. As the basic indicators characterizing resistance of erythrocytes to the hemolytic agent influence we used the hemolysis rate constant, i.e. the value inverse to cell half-life time. For analysis of acid erythrograms we also used such indicators as hemolysis duration, maximum erythrogram’s time and width of the interval of erythrocyte group dominating in the population. We processed the results of research statistically. The study showed that acid resistance of erythrocytes decreased during the first five days of vibration influence at frequencies of 8–16 Hz. Besides, erythrocytes were divided into fractions that indicated the erythrocytes aging and strengthening of the population heterogeneity. On the fifth day of 16 Hz influence the emission of reticulocytes was recorded. At 8 Hz influence these processes were registered on the 7th day of the experiment. During the subsequent days the hemolysis curves were slightly displaced in relation to the control. Increase in hemolysis

  4. Nonstationary distributions of wave intensities in wave turbulence

    Science.gov (United States)

    Choi, Yeontaek; Jo, Sanggyu; Kwon, Young-Sam; Nazarenko, Sergey

    2017-09-01

    We obtain a general solution for the probability density function (PDF) of wave intensities in non-stationary wave turbulence. The solution is expressed in terms of the initial PDF and the wave action spectrum satisfying the wave-kinetic equation. We establish that, in the absence of wave breaking, the wave statistics converge to a Gaussian distribution in forced-dissipated wave systems while approaching a steady state. Also, we find that in non-stationary systems, if the statistic is Gaussian initially, it will remain Gaussian for all time. Generally, if the statistic is not initially Gaussian, it will remain non-Gaussian over the characteristic nonlinear evolution time of the wave spectrum. In freely decaying wave turbulence, substantial deviations from Gaussianity may persist infinitely long.

  5. Data-Driven Iterative Vibration Signal Enhancement Strategy Using Alpha Stable Distribution

    Directory of Open Access Journals (Sweden)

    Grzegorz Żak

    2017-01-01

    Full Text Available The authors propose a novel procedure for enhancement of the signal to noise ratio in vibration data acquired from machines working in mining industry environment. Proposed method allows performing data-driven reduction of the deterministic, high energy, and low frequency components. Furthermore, it provides a way to enhance signal of interest. Procedure incorporates application of the time-frequency decomposition, α-stable distribution based signal modeling, and stability parameter in the time domain as a stoppage criterion for iterative part of the procedure. An advantage of the proposed algorithm is data-driven, automative detection of the informative frequency band as well as band with high energy due to the properties of the used distribution. Furthermore, there is no need to have knowledge regarding kinematics, speed, and so on. The proposed algorithm is applied towards real data acquired from the belt conveyor pulley drive’s gearbox.

  6. Spatial variability of "Did You Feel It?" intensity data: insights into sampling biases in historical earthquake intensity distributions

    Science.gov (United States)

    Hough, Susan E.

    2013-01-01

    Recent parallel development of improved quantitative methods to analyze intensity distributions for historical earthquakes and of web‐based systems for collecting intensity data for modern earthquakes provides an opportunity to reconsider not only important individual historical earthquakes but also the overall characterization of intensity distributions for historical events. The focus of this study is a comparison between intensity distributions of historical earthquakes with those from modern earthquakes for which intensities have been determined by the U.S. Geological Survey “Did You Feel It?” (DYFI) website (see Data and Resources). As an example of a historical earthquake, I focus initially on the 1843 Marked Tree, Arkansas, event. Its magnitude has been previously estimated as 6.0–6.2. I first reevaluate the macroseismic effects of this earthquake, assigning intensities using a traditional approach, and estimate a preferred magnitude of 5.4. Modified Mercalli intensity (MMI) values for the Marked Tree earthquake are higher, on average, than those from the 2011 >Mw 5.8 Mineral, Virginia, earthquake for distances ≤500  km but comparable or lower on average at larger distances, with a smaller overall felt extent. Intensity distributions for other moderate historical earthquakes reveal similar discrepancies; the discrepancy is also even more pronounced using earlier published intensities for the 1843 earthquake. I discuss several hypotheses to explain the discrepancies, including the possibility that intensity values associated with historical earthquakes are commonly inflated due to reporting/sampling biases. A detailed consideration of the DYFI intensity distribution for the Mineral earthquake illustrates how reporting and sampling biases can account for historical earthquake intensity biases as high as two intensity units and for the qualitative difference in intensity distance decays for modern versus historical events. Thus, intensity maps for

  7. Truncated thermal equilibrium distribution for intense beam propagation

    Directory of Open Access Journals (Sweden)

    Ronald C. Davidson

    2003-02-01

    Full Text Available An intense charged particle beam with directed kinetic energy (γ_{b}-1m_{b}c^{2} propagates in the z direction through an applied focusing field with transverse focusing force modeled by F_{foc}=-γ_{b}m_{b}ω_{β⊥}^{2}x_{⊥} in the smooth-focusing approximation. This paper examines properties of the axisymmetric, truncated thermal equilibrium distribution F_{b}(r,p_{⊥}=Aexp⁡(-H_{⊥}/T[over ^]_{⊥b}⊕(H_{⊥}-E_{b}, where A, T[over ^]_{⊥b}, and E_{b} are positive constants, and H_{⊥} is the Hamiltonian for transverse particle motion. The equilibrium profiles for beam number density, n_{b}(r=∫d^{2}pF_{b}(r,p_{⊥}, and transverse temperature, T_{⊥b}(r=[n_{b}(r]^{-1}∫d^{2}p(p_{⊥}^{2}/2γ_{b}m_{b}F_{b}(r,p_{⊥}, are calculated self-consistently including space-charge effects. Several properties of the equilibrium profiles are noteworthy. For example, the beam has a sharp outer edge radius r_{b} with n_{b}(r≥r_{b}=0, where r_{b} depends on the value of E_{b}/T[over ^]_{⊥b}. In addition, unlike the choice of a semi-Gaussian distribution, F_{b}^{SG}=Aexp⁡(-p_{⊥}^{2}/2γ_{b}m_{b}T[over ^]_{⊥b}⊕(r-r_{b}, the truncated thermal equilibrium distribution F_{b}(r,p depends on (r,p only through the single-particle constant of the motion H_{⊥} and is therefore a true steady-state solution (∂/∂t=0 of the nonlinear Vlasov-Maxwell equations.

  8. Free Transverse Vibration of Orthotropic Thin Trapezoidal Plate of Parabolically Varying Thickness Subjected to Linear Temperature Distribution

    Directory of Open Access Journals (Sweden)

    Arun Kumar Gupta

    2014-01-01

    Full Text Available The present paper deals with the free transverse vibration of orthotropic thin trapezoidal plate of parabolically varying thickness in x-direction subjected to linear temperature distribution in x-direction through a numerical method. The deflection function is defined by the product of the equations of the prescribed continuous piecewise boundary shape. Rayleigh-Ritz method is used to evaluate the fundamental frequencies. The equations of motion, governing the free transverse vibrations of orthotropic thin trapezoidal plates, are derived with boundary condition CSCS. Frequency corresponding to the first two modes of vibration is calculated for the orthotropic thin trapezoidal plate having CSCS edges for different values of thermal gradient, taper constant, and aspect ratio. The proposed method is applied to solve orthotropic thin trapezoidal plate of variable thickness with C-S-C-S boundary conditions. Results are shown by figures for different values of thermal gradient, taper constant, and aspect ratio for the first two modes of vibrations.

  9. Free Vibration of a Perfectly Clamped-Free Beam with Stepwise Eccentric Distributed Masses

    Directory of Open Access Journals (Sweden)

    Gilbert-Rainer Gillich

    2016-01-01

    Full Text Available A direct approach for the calculation of the natural frequencies and vibration mode shapes of a perfectly clamped-free beam with additional stepwise eccentric distributed masses is developed, along with its corresponding equations. Firstly there is contrived influence of a mass, located on a given position along the beam, upon the modal energies, via an energy analysis method. Secondly, the mass participation coefficient is defined as a function of the mass location and the bending vibration mode number. The proposed coefficient is employed to deduce the mathematical relation for the frequencies of beams with supplementary eccentric loads, generally available for any boundary conditions. The accuracy of the obtained mathematical relation was examined in comparison with the numerical simulation and experimental results for a cantilever beam. For this aim, several finite element models have been developed, individualized by the disturbance extent and the mass increase or decrease. Also, one real system was tested. The comparisons between the analytically achieved results and those obtained from experiments proved the accuracy of the developed mathematical relation.

  10. AB-INITIO CALCULATIONS OF ANHARMONIC VIBRATIONAL TRANSITION INTENSITIES OF TRANS-2,3-DIDEUTERIOOXIRANE

    DEFF Research Database (Denmark)

    Bludsky, O.; Bak, Keld L.; JORGENSEN, P

    1995-01-01

    The quartic force field and the cubic dipole moment surface are calculated for trans-2,3-dideuteriooxirane at the self-consistent field and the second order Moller-Plesset levels of theory using a triple zeta plus two polarization functions basis set. Contact transformation theory is used...... to determine the corresponding anharmonic vibrtional frequencies and intensities. Inclusion of anharmonicity improves agreement of the calculated frequencies and intensities with their experimental counterparts. The anharmonic corrections are much more sensitive to correlation effects for intensities than...

  11. Vapor deposition of polystyrene thin films by intense laser vibrational excitation

    DEFF Research Database (Denmark)

    Bubb, D.M.; Papantonakis, M.R.; Horwitz, J.S.

    2002-01-01

    -induced damage to the target can be seen. RIR-PLD is a fundamentally new approach to polymer thin film growth as the absorption of radiation resonant with vibrational modes allow the energy to be deposited into the polymer and transfers between macromolecules in such a way as to promote efficient, non......Polystyrene films were deposited using resonant infrared pulsed laser depositions (RIR-PLD). Thin films were grown on Si(1 1 1) wafers and NaCl substrates and analyzed by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). The depositions were carried out...... in vacuum (10(-4)-10(-5) Torr) at wavelengths 3.28, 3.30, 3.42 and 3.48 mum which are resonant with CH2 stretching modes in the polymer. We also attempted to deposit a films using non-resonant infrared (RIR) excitation (2.90 mum). At this wavelength no films were deposited, and evidence for laser...

  12. A Review of Hybrid Fiber-Optic Distributed Simultaneous Vibration and Temperature Sensing Technology and Its Geophysical Applications

    Directory of Open Access Journals (Sweden)

    Khalid Miah

    2017-11-01

    Full Text Available Distributed sensing systems can transform an optical fiber cable into an array of sensors, allowing users to detect and monitor multiple physical parameters such as temperature, vibration and strain with fine spatial and temporal resolution over a long distance. Fiber-optic distributed acoustic sensing (DAS and distributed temperature sensing (DTS systems have been developed for various applications with varied spatial resolution, and spectral and sensing range. Rayleigh scattering-based phase optical time domain reflectometry (OTDR for vibration and Raman/Brillouin scattering-based OTDR for temperature and strain measurements have been developed over the past two decades. The key challenge has been to find a methodology that would enable the physical parameters to be determined at any point along the sensing fiber with high sensitivity and spatial resolution, yet within acceptable frequency range for dynamic vibration, and temperature detection. There are many applications, especially in geophysical and mining engineering where simultaneous measurements of vibration and temperature are essential. In this article, recent developments of different hybrid systems for simultaneous vibration, temperature and strain measurements are analyzed based on their operation principles and performance. Then, challenges and limitations of the systems are highlighted for geophysical applications.

  13. INTERACTION OF LASER RADIATION WITH MATTER: Effect of stimulated emission on the distribution of CO molecules over vibrational levels

    Science.gov (United States)

    Grigorian, G. M.; Kochetov, I. V.

    2008-10-01

    The vibrational distribution function (VDF) of CO molecules is measured in the presence and absence of generation in a CO laser pumped by a longitudinal dc discharge. Kinetic equations for the VDF and the Boltzmann equation for the energy distribution function of electrons are solved simultaneously in a theoretical model. A comparison of the experimental and calculated lasing spectra and VDF demonstrates their good agreement. By introducing an absorbing cell with different gases (NO, C2H4, CO2, C6H6) into a resonator, the influence of selection of laser lines on the lasing spectrum and the VDF of CO molecules is studied. It is shown experimentally that the population of CO molecules at vibrational levels involved in lasing and at higher levels strongly decreases and the VDF at lower levels changes insignificantly. It is demonstrated that the VDF shape of CO molecules at high vibrational levels can be changed by introducing intracavity absorption.

  14. Changes in muscle cross-sectional area, muscle force, and jump performance during 6 weeks of progressive whole-body vibration combined with progressive, high intensity resistance training

    Science.gov (United States)

    Rosenberger, A.; Beijer, Å.; Johannes, B.; Schoenau, E.; Mester, J.; Rittweger, J.; Zange, J.

    2017-01-01

    Objectives: We hypothesized that progressive whole-body vibration (WBV) superimposed to progressive high intensity resistance training has greater effects on muscle cross-sectional area (CSA), muscle force of leg muscles, and jump performance than progressive high intensity resistance training alone. Methods: Two groups of healthy male subjects performed either 6 weeks of Resistive Vibration Exercise (RVE, squats and heel raises with WBV, n=13) or Resistive Exercise (RE, squats and heel raises without WBV, n=13). Squats under RVE required indispensable weight loading on the forefoot to damp harmful vibrations to the head. Time, intervention, and interaction effects were analyzed. Results: After 6 weeks of training, knee extensor CSA, isometric knee extension force, and counter movement jump height increased equally in both groups (time effect, Ptraining effects than RE only in plantar flexor muscles. RVE seems to be suitable in professional sports with a special focus on calf muscles. PMID:28574410

  15. The Distribution of Energy-Intensive Sectors in the US

    NARCIS (Netherlands)

    Michielsen, T.O.

    2011-01-01

    We study the in uence of energy endowments on the location of energy-intensive industries. We use data on manufacturing sectors in 50 US states from 2002 until 2008, with detailed information on state endowments of coal, natural gas, oil and hydropower and sectoral fuel and electricity intensities.

  16. Tracking molecular structure deformation of nitrobenzene and its torsion-vibration coupling by intense pumping CARS

    Science.gov (United States)

    Wang, Chang; Wu, Hong-Lin; Song, Yun-Fei; He, Xing; Yang, Yan-Qiang; Tan, Duo-Wang

    2016-11-01

    The structural deformation induced by intense laser field of liquid nitrobenzene (NB) molecule, a typical molecule with restricting internal rotation, is tracked by time- and frequency-resolved coherent anti-Stokes. Raman spectroscopy (CARS) technique with an intense pump laser. The CARS spectra of liquid NB show that the NO2 torsional mode couples with the NO2 symmetric stretching mode, and the NB molecule undergoes ultrafast structural deformation with a relaxation time of 265 fs. The frequency of NO2 torsional mode in liquid NB (42 cm-1) at room temperature is found from the sum and difference combination bands involving the NO2 symmetric stretching mode and torsional mode in time- and frequency-resolved CARS spectra. Project supported by the National Natural Science Foundation of China (Grant Nos. 21173063 and 21203047), the Foundation of Heilongjiang Bayi Agricultural University, China (Grant No. XZR2014-16), NSAF (Grant No. U1330106), and the Special Research Project of National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, China Academy of Engineering Physics (Grant No. 2012-S-07).

  17. Effects of high power ultrasonic vibration on temperature distribution of workpiece in dry creep feed up grinding.

    Science.gov (United States)

    Paknejad, Masih; Abdullah, Amir; Azarhoushang, Bahman

    2017-11-01

    Temperature history and distribution of steel workpiece (X20Cr13) was measured by a high tech infrared camera under ultrasonic assisted dry creep feed up grinding. For this purpose, a special experimental setup was designed and fabricated to vibrate only workpiece along two directions by a high power ultrasonic transducer. In this study, ultrasonic effects with respect to grinding parameters including depth of cut (a e ), feed speed (v w ), and cutting speed (v s ) has been investigated. The results indicate that the ultrasonic vibration has considerable effect on reduction of temperature, depth of thermal damage of workpiece and width of temperature contours. Maximum temperature reduction of 25.91% was reported at condition of v s =15m/s, v w =500mm/min, a e =0.4mm in the presence of ultrasonic vibration. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. An inverse method for the identification of a distributed random excitation acting on a vibrating structure. Theory

    Energy Technology Data Exchange (ETDEWEB)

    Granger, S.; Perotin, L. [Electricite de France (EDF), 78 - Chatou (France)

    1997-12-31

    Maintaining the PWR components under reliable operating conditions requires a complex design to prevent various damaging processes, including fatigue and wear problems due to flow-induced vibration. In many practical situations, it is difficult, if not impossible, to perform direct measurements or calculations of the external forces acting on vibrating structures. Instead, vibrational responses can often be conveniently measured. This paper presents an inverse method for estimating a distributed random excitation from the measurement of the structural response at a number of discrete points. This paper is devoted to the presentation of the theoretical development. The force identification method is based on a modal model for the structure and a spatial orthonormal decomposition of the excitation field. The estimation of the Fourier coefficients of this orthonormal expansion is presented. As this problem turns out to be ill-posed, a regularization process is introduced. The minimization problem associated to this process is then formulated and its solutions is developed. (author) 17 refs.

  19. Investigations on the Effects of Vortex-Induced Vibration with Different Distributions of Lorentz Forces

    Directory of Open Access Journals (Sweden)

    Hui Zhang

    2017-01-01

    Full Text Available The control of vortex-induced vibration (VIV in shear flow with different distributions of Lorentz force is numerically investigated based on the stream function–vorticity equations in the exponential-polar coordinates exerted on moving cylinder for Re = 150. The cylinder motion equation coupled with the fluid, including the mathematical expressions of the lift force coefficient C l , is derived. The initial and boundary conditions as well as the hydrodynamic forces on the surface of cylinder are also formulated. The Lorentz force applied to suppress the VIV has no relationship with the flow field, and involves two categories, i.e., the field Lorentz force and the wall Lorentz force. With the application of symmetrical Lorentz forces, the symmetric field Lorentz force can amplify the drag, suppress the flow separation, decrease the lift fluctuation, and then suppress the VIV while the wall Lorentz force decreases the drag only. With the application of asymmetrical Lorentz forces, besides the above-mentioned effects, the field Lorentz force can increase additional lift induced by shear flow, whereas the wall Lorentz force can counteract the additional lift, which is dominated on the total effect.

  20. Frequency and Distribution of Intense Rainfall in Uyo - South ...

    African Journals Online (AJOL)

    Since floods [particularly seasonal are primarily due to intense and prolonged rainstorms, the data for extreme rainfall in an area are needed for design purposes such as bridges, culverts, storm drains and design of flood control structures, particularly in large cities. LWATI: A Journal of Contemporary Research Vol. 5 2008: ...

  1. Direct assignment of molecular vibrations via normal mode analysis of the neutron dynamic pair distribution function technique.

    Science.gov (United States)

    Fry-Petit, A M; Rebola, A F; Mourigal, M; Valentine, M; Drichko, N; Sheckelton, J P; Fennie, C J; McQueen, T M

    2015-09-28

    For over a century, vibrational spectroscopy has enhanced the study of materials. Yet, assignment of particular molecular motions to vibrational excitations has relied on indirect methods. Here, we demonstrate that applying group theoretical methods to the dynamic pair distribution function analysis of neutron scattering data provides direct access to the individual atomic displacements responsible for these excitations. Applied to the molecule-based frustrated magnet with a potential magnetic valence-bond state, LiZn2Mo3O8, this approach allows direct assignment of the constrained rotational mode of Mo3O13 clusters and internal modes of MoO6 polyhedra. We anticipate that coupling this well known data analysis technique with dynamic pair distribution function analysis will have broad application in connecting structural dynamics to physical properties in a wide range of molecular and solid state systems.

  2. Temperature dependence of the intensity of the vibration-rotational absorption band ν2 of H2O trapped in an argon matrix

    Science.gov (United States)

    Pitsevich, G.; Doroshenko, I.; Malevich, A..; Shalamberidze, E.; Sapeshko, V.; Pogorelov, V.; Pettersson, L. G. M.

    2017-02-01

    Using two sets of effective rotational constants for the ground (000) and the excited bending (010) vibrational states the calculation of frequencies and intensities of vibration-rotational transitions for J″ = 0 - 2; and J‧ = 0 - 3; was carried out in frame of the model of a rigid asymmetric top for temperatures from 0 to 40 K. The calculation of the intensities of vibration-rotational absorption bands of H2O in an Ar matrix was carried out both for thermodynamic equilibrium and for the case of non-equilibrium population of para- and ortho-states. For the analysis of possible interaction of vibration-rotational and translational motions of a water molecule in an Ar matrix by 3D Schrödinger equation solving using discrete variable representation (DVR) method, calculations of translational frequencies of H2O in a cage formed after one argon atom deleting were carried out. The results of theoretical calculations were compared to experimental data taken from literature.

  3. An Intelligent Sensor Array Distributed System for Vibration Analysis and Acoustic Noise Characterization of a Linear Switched Reluctance Actuator

    Directory of Open Access Journals (Sweden)

    Maria Calado

    2012-06-01

    Full Text Available This paper proposes a distributed system for analysis and monitoring (DSAM of vibrations and acoustic noise, which consists of an array of intelligent modules, sensor modules, communication bus and a host PC acting as data center. The main advantages of the DSAM are its modularity, scalability, and flexibility for use of different type of sensors/transducers, with analog or digital outputs, and for signals of different nature. Its final cost is also significantly lower than other available commercial solutions. The system is reconfigurable, can operate either with synchronous or asynchronous modes, with programmable sampling frequencies, 8-bit or 12-bit resolution and a memory buffer of 15 kbyte. It allows real-time data-acquisition for signals of different nature, in applications that require a large number of sensors, thus it is suited for monitoring of vibrations in Linear Switched Reluctance Actuators (LSRAs. The acquired data allows the full characterization of the LSRA in terms of its response to vibrations of structural origins, and the vibrations and acoustic noise emitted under normal operation. The DSAM can also be used for electrical machine condition monitoring, machine fault diagnosis, structural characterization and monitoring, among other applications.

  4. An intelligent sensor array distributed system for vibration analysis and acoustic noise characterization of a linear switched reluctance actuator.

    Science.gov (United States)

    Salvado, José; Espírito-Santo, António; Calado, Maria

    2012-01-01

    This paper proposes a distributed system for analysis and monitoring (DSAM) of vibrations and acoustic noise, which consists of an array of intelligent modules, sensor modules, communication bus and a host PC acting as data center. The main advantages of the DSAM are its modularity, scalability, and flexibility for use of different type of sensors/transducers, with analog or digital outputs, and for signals of different nature. Its final cost is also significantly lower than other available commercial solutions. The system is reconfigurable, can operate either with synchronous or asynchronous modes, with programmable sampling frequencies, 8-bit or 12-bit resolution and a memory buffer of 15 kbyte. It allows real-time data-acquisition for signals of different nature, in applications that require a large number of sensors, thus it is suited for monitoring of vibrations in Linear Switched Reluctance Actuators (LSRAs). The acquired data allows the full characterization of the LSRA in terms of its response to vibrations of structural origins, and the vibrations and acoustic noise emitted under normal operation. The DSAM can also be used for electrical machine condition monitoring, machine fault diagnosis, structural characterization and monitoring, among other applications.

  5. Intensity distributions and isolated attosecond pulse generation from molecular high-order harmonic generation in H2+ driven by nonhomogeneous field

    Science.gov (United States)

    Feng, Liqiang; Chu, Tianshu

    2017-10-01

    Intensity distributions and isolated attosecond pulse generation from the molecular high-order harmonic generation (MHHG) in H2+ and T2+ driven by the nonhomogeneous field have been theoretically investigated. (i) Generally speaking, the intensities of the harmonics driven by the homogeneous field can be enhanced as the initial vibrational state increases and much more intense harmonics can be obtained from the light nuclei. However, with the introduction of the nonhomogeneous effect, the enhanced ratios of the harmonic yields are decreased as the initial vibrational state increases. Moreover, the intensities of the harmonics from H2+ and T2+ are very sensitive to the nonhomogeneous effect of the laser field. (ii) The contributions of the MHHG from the two-H nuclei present the periodic variation as a function of the laser phase for the case of the symmetric nonhomogeneous field. However, for the case of the positive and the negative asymmetric nonhomogeneous fields, the left-H and the right-H play the dominating role in the MHHG, respectively. Moreover, as the angle between the laser polarization direction and the molecular axis increases, the intensity differences of the harmonics from the two-H nuclei are increased. (iii) By properly adding a half-cycle pulse into the positive asymmetric nonhomogeneous field, a supercontinuum with the bandwidth of 279 eV and an isolated 25 as pulse can be obtained.

  6. Quantum arrival-time distributions from intensity functions

    DEFF Research Database (Denmark)

    Wlodarz, Joachim

    2002-01-01

    The quantum time-of-arrival problem is discussed within the standard formulation of nonrelativistic quantum mechanics with parametric time. It is shown that a general class of arrival-time probability distributions results from the assumption that the arrival process of a quantum particle...... is similar in nature to other time-dependent arrival-type processes occurring, e.g., in population biology or queue theory. A simple but illustrative example related to the well-known Wigner discussion of the time-energy uncertainty relation is given and the numerical results obtained are compared...... with Kijowski's distribution [Rep. Math. Phys. 6, 362 (1974)] of arrival times for a free quantum particle....

  7. Longitudinal intensity distribution near the focus produced by light through scattering media

    Science.gov (United States)

    Ji, Xuan-Xuan; Wan, Li-Peng; Chen, Zi-Yang; Pu, Ji-Xiong

    2017-08-01

    Speckle pattern is formed when coherent light passes through scattering media. It has been demonstrated that after appropriately optimizing the phase of the incident light, a bright focal spot in the target point can be obtained for the case that the light passes through the scattering medium. However, until now the focused intensity distribution near the focus seems unclear. In this paper we experimentally investigate some factors influencing the longitudinal intensity distribution near the focus in details. It is shown that the desired longitudinal focused intensity distribution can be obtained by optimizing the incident light. The results may have potential applications in particle manipulation and laser processing, etc.

  8. Theory of vibration protection

    CERN Document Server

    Karnovsky, Igor A

    2016-01-01

    This text is an advancement of the theory of vibration protection of mechanical systems with lumped and distributed parameters. The book offers various concepts and methods of solving vibration protection problems, discusses the advantages and disadvantages of different methods, and the fields of their effective applications. Fundamental approaches of vibration protection, which are considered in this book, are the passive, parametric and optimal active vibration protection. The passive vibration protection is based on vibration isolation, vibration damping and dynamic absorbers. Parametric vibration protection theory is based on the Shchipanov-Luzin invariance principle. Optimal active vibration protection theory is based on the Pontryagin principle and the Krein moment method. The book also contains special topics such as suppression of vibrations at the source of their occurrence and the harmful influence of vibrations on humans. Numerous examples, which illustrate the theoretical ideas of each chapter, ar...

  9. Data intensive high energy physics analysis in a distributed cloud

    Science.gov (United States)

    Charbonneau, A.; Agarwal, A.; Anderson, M.; Armstrong, P.; Fransham, K.; Gable, I.; Harris, D.; Impey, R.; Leavett-Brown, C.; Paterson, M.; Podaima, W.; Sobie, R. J.; Vliet, M.

    2012-02-01

    We show that distributed Infrastructure-as-a-Service (IaaS) compute clouds can be effectively used for the analysis of high energy physics data. We have designed a distributed cloud system that works with any application using large input data sets requiring a high throughput computing environment. The system uses IaaS-enabled science and commercial clusters in Canada and the United States. We describe the process in which a user prepares an analysis virtual machine (VM) and submits batch jobs to a central scheduler. The system boots the user-specific VM on one of the IaaS clouds, runs the jobs and returns the output to the user. The user application accesses a central database for calibration data during the execution of the application. Similarly, the data is located in a central location and streamed by the running application. The system can easily run one hundred simultaneous jobs in an efficient manner and should scale to many hundreds and possibly thousands of user jobs.

  10. Computationally intensive econometrics using a distributed matrix-programming language.

    Science.gov (United States)

    Doornik, Jurgen A; Hendry, David F; Shephard, Neil

    2002-06-15

    This paper reviews the need for powerful computing facilities in econometrics, focusing on concrete problems which arise in financial economics and in macroeconomics. We argue that the profession is being held back by the lack of easy-to-use generic software which is able to exploit the availability of cheap clusters of distributed computers. Our response is to extend, in a number of directions, the well-known matrix-programming interpreted language Ox developed by the first author. We note three possible levels of extensions: (i) Ox with parallelization explicit in the Ox code; (ii) Ox with a parallelized run-time library; and (iii) Ox with a parallelized interpreter. This paper studies and implements the first case, emphasizing the need for deterministic computing in science. We give examples in the context of financial economics and time-series modelling.

  11. Intense Collaboration In Globally Distributed Teams: Evolving Patterns Of Dependencies And Coordination

    NARCIS (Netherlands)

    K. Kumar (Kuldeep); P.C. van Fenema (Paul); M.A. von Glinow

    2004-01-01

    textabstractAs multi-national firms and major offshore outsourcing companies develop experience with global work, their globally distributed teams face the challenge of collaborating intensely without the common interaction advantages associated with collocated work. This chapter analyzes the

  12. Spatial linear flows of finite length with nonuniform intensity distribution

    Directory of Open Access Journals (Sweden)

    Mikhaylov Ivan Evgrafovich

    2014-02-01

    Full Text Available Irrotational flows produced by spatial linear flows of finite length with different uneven lows of discharge over the flow length are represented in cylindrical coordinate system. Flows with the length 2a are placed in infinite space filled with ideal (inviscid fluid. In “А” variant discharge is fading linearly downward along the length of the flow. In “B” variant in upper half of the flow (length a discharge is fading linearly downward, in lower half of the flow discharge is fading linearly from the middle point to lower end. In “C” variant discharge of the flow is growing linearly from upper and lower ends to middle point.Equations for discharge distribution along the length of the flow are provided for each variant. Equations consist of two terms and include two dimensional parameters and current coordinate that allows integrating on flow length. Analytical expressions are derived for speed potential functions and flow speed components for flow speeds produced by analyzed flows. These analytical expressions consist of dimensional parameters of discharge distribution patterns along the length of the flow. Flow lines equation (meridional sections of flow surfaces for variants “A”, “B”, “C” is unsolvable in quadratures. Flow lines plotting is proposed to be made by finite difference method. Equations for flow line plotting are provided for each variant. Calculations of these equations show that the analyzed flows have the following flow lines: “A” has confocal hyperbolical curves, “B” and “C” have confocal hyperboles. Flow surfaces are confocal hyperboloids produced by rotation of these hyperboles about the axis passing through the flows. In “A” variant the space filled with fluid is separated by vividly horizontal flow surface in two parts. In upper part that includes the smaller part of the flow length flow lines are oriented downward, in lower part – upward. The equation defining coordinate of

  13. High Performance Data Transfer for Distributed Data Intensive Sciences

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Chin [Zettar Inc., Mountain View, CA (United States); Cottrell, R ' Les' A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Hanushevsky, Andrew B. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Kroeger, Wilko [SLAC National Accelerator Lab., Menlo Park, CA (United States); Yang, Wei [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2017-03-06

    We report on the development of ZX software providing high performance data transfer and encryption. The design scales in: computation power, network interfaces, and IOPS while carefully balancing the available resources. Two U.S. patent-pending algorithms help tackle data sets containing lots of small files and very large files, and provide insensitivity to network latency. It has a cluster-oriented architecture, using peer-to-peer technologies to ease deployment, operation, usage, and resource discovery. Its unique optimizations enable effective use of flash memory. Using a pair of existing data transfer nodes at SLAC and NERSC, we compared its performance to that of bbcp and GridFTP and determined that they were comparable. With a proof of concept created using two four-node clusters with multiple distributed multi-core CPUs, network interfaces and flash memory, we achieved 155Gbps memory-to-memory over a 2x100Gbps link aggregated channel and 70Gbps file-to-file with encryption over a 5000 mile 100Gbps link.

  14. A comparison study of steady-state vibrations with single fractional-order and distributed-order derivatives

    Directory of Open Access Journals (Sweden)

    Duan Jun-Sheng

    2017-12-01

    Full Text Available We conduct a detailed study and comparison for the one-degree-of-freedom steady-state vibrations under harmonic driving with a single fractional-order derivative and a distributed-order derivative. For each of the two vibration systems, we consider the stiffness contribution factor and damping contribution factor of the term of fractional derivatives, the amplitude and the phase difference for the response. The effects of driving frequency on these response quantities are discussed. Also the influences of the order α of the fractional derivative and the parameter γ parameterizing the weight function in the distributed-order derivative are analyzed. Two cases display similar response behaviors, but the stiffness contribution factor and damping contribution factor of the distributed-order derivative are almost monotonic change with the parameter γ, not exactly like the case of single fractional-order derivative for the order α. The case of the distributed-order derivative provides us more options for the weight function and parameters.

  15. Observational evidence for exponential tornado intensity distributions over specific kinetic energy

    Science.gov (United States)

    Dotzek, Nikolai; Kurgansky, Michael V.; Grieser, Jürgen; Feuerstein, Bernold; Névir, Peter

    2005-12-01

    Observational evidence supports the recent analytical prediction that tornado intensities are exponentially distributed over peak wind speed squared (v2), or equivalently, Rayleigh-distributed over v. For large USA data samples, exponential tails are found in the tornado intensity distributions over v2 from about F2 intensity on. Similar results follow for smaller worldwide data samples. For the 1990s data from the USA and Oklahoma, deviations from the Rayleigh distribution for weak tornadoes can be explained by the emergence of a separate, likely non-mesocyclonic tornado mode. These bimodal datasets can be modeled by superposition of two Rayleigh distributions. The change in modal dominance occurs at about the F2 threshold (v ~ 50 m s-1). In France, likely mainly the mesocyclonic tornado mode has been recorded, while in the UK, only a non-mesocyclonic mode seems to be present.

  16. Ultrasound source using a rectangular vibrating plate combined with rigid walls

    Science.gov (United States)

    Sato, Ryo; Asami, Takuya; Miura, Hikaru

    2017-07-01

    Ultrasound sources that use a stripe-mode rectangular vibrating plate radiate strong ultrasound waves in the air. In this study, we investigated the design strategy for combining the vibrating plate with rigid walls and evaluated the intense ultrasound waves radiated by the sound source. First, we examined the design method for a rectangular transverse vibrating plate with both ends fixed and the vibration amplitude distribution of the vibrating plate. Second, we measured the sound pressure distribution in the formation of the standing wave field. Finally, we clarified the relationship between the input power and sound pressure of the standing wave field antinodes.

  17. Intensive Versus Distributed Aphasia Therapy: A Nonrandomized, Parallel-Group, Dosage-Controlled Study.

    Science.gov (United States)

    Dignam, Jade; Copland, David; McKinnon, Eril; Burfein, Penni; O'Brien, Kate; Farrell, Anna; Rodriguez, Amy D

    2015-08-01

    Most studies comparing different levels of aphasia treatment intensity have not controlled the dosage of therapy provided. Consequently, the true effect of treatment intensity in aphasia rehabilitation remains unknown. Aphasia Language Impairment and Functioning Therapy is an intensive, comprehensive aphasia program. We investigated the efficacy of a dosage-controlled trial of Aphasia Language Impairment and Functioning Therapy, when delivered in an intensive versus distributed therapy schedule, on communication outcomes in participants with chronic aphasia. Thirty-four adults with chronic, poststroke aphasia were recruited to participate in an intensive (n=16; 16 hours per week; 3 weeks) versus distributed (n=18; 6 hours per week; 8 weeks) therapy program. Treatment included 48 hours of impairment, functional, computer, and group-based aphasia therapy. Distributed therapy resulted in significantly greater improvements on the Boston Naming Test when compared with intensive therapy immediately post therapy (P=0.04) and at 1-month follow-up (P=0.002). We found comparable gains on measures of participants' communicative effectiveness, communication confidence, and communication-related quality of life for the intensive and distributed treatment conditions at post-therapy and 1-month follow-up. Aphasia Language Impairment and Functioning Therapy resulted in superior clinical outcomes on measures of language impairment when delivered in a distributed versus intensive schedule. The therapy progam had a positive effect on participants' functional communication and communication-related quality of life, regardless of treatment intensity. These findings contribute to our understanding of the effect of treatment intensity in aphasia rehabilitation and have important clinical implications for service delivery models. © 2015 American Heart Association, Inc.

  18. The Distribution of the Interval between Events of a Cox Process with Shot Noise Intensity

    Directory of Open Access Journals (Sweden)

    Angelos Dassios

    2008-01-01

    Full Text Available Applying piecewise deterministic Markov processes theory, the probability generating function of a Cox process, incorporating with shot noise process as the claim intensity, is obtained. We also derive the Laplace transform of the distribution of the shot noise process at claim jump times, using stationary assumption of the shot noise process at any times. Based on this Laplace transform and from the probability generating function of a Cox process with shot noise intensity, we obtain the distribution of the interval of a Cox process with shot noise intensity for insurance claims and its moments, that is, mean and variance.

  19. Energy and intensity distributions of 279 keV multiply scattered ...

    Indian Academy of Sciences (India)

    An inverse response matrix converts the observed pulse-height distribution of a NaI(Tl) scintillation detector to a true photon spectrum. This also results in extraction of intensity and energy distributions of multiply scattered events originating from interactions of 279 keV photons with thick targets of bronze. The observed ...

  20. Vibrational Diver

    Science.gov (United States)

    Kozlov, Victor; Ivanova, Alevtina; Schipitsyn, Vitalii; Stambouli, Moncef

    2014-10-01

    The paper is concerned with dynamics of light solid in cavity with liquid subjected to rotational vibration in the external force field. New vibrational phenomenon - diving of a light cylinder to the cavity bottom is found. The experimental investigation of a horizontal annulus with a partition has shown that under vibration a light body situated in the upper part of the layer is displaced in a threshold manner some distance away from the boundary. In this case the body executes symmetric tangential oscillations. An increase of the vibration intensity leads to a tangential displacement of the body near the external boundary. This displacement is caused by the tangential component of the vibrational lift force, which appears as soon as the oscillations lose symmetry. In this case the trajectory of the body oscillatory motion has the form of a loop. The tangential lift force makes stable the position of the body on the inclined section of the layer and even in its lower part. A theoretical interpretation has been proposed, which explains stabilization of a quasi-equilibrium state of a light body near the cavity bottom in the framework of vibrational hydromechanics.

  1. Feature extraction and identification in distributed optical-fiber vibration sensing system for oil pipeline safety monitoring

    Science.gov (United States)

    Wu, Huijuan; Qian, Ya; Zhang, Wei; Tang, Chenghao

    2017-09-01

    High sensitivity of a distributed optical-fiber vibration sensing (DOVS) system based on the phase-sensitivity optical time domain reflectometry (Φ-OTDR) technology also brings in high nuisance alarm rates (NARs) in real applications. In this paper, feature extraction methods of wavelet decomposition (WD) and wavelet packet decomposition (WPD) are comparatively studied for three typical field testing signals, and an artificial neural network (ANN) is built for the event identification. The comparison results prove that the WPD performs a little better than the WD for the DOVS signal analysis and identification in oil pipeline safety monitoring. The identification rate can be improved up to 94.4%, and the nuisance alarm rate can be effectively controlled as low as 5.6% for the identification network with the wavelet packet energy distribution features.

  2. Feature extraction and identification in distributed optical-fiber vibration sensing system for oil pipeline safety monitoring

    Science.gov (United States)

    Wu, Huijuan; Qian, Ya; Zhang, Wei; Tang, Chenghao

    2017-12-01

    High sensitivity of a distributed optical-fiber vibration sensing (DOVS) system based on the phase-sensitivity optical time domain reflectometry (Φ-OTDR) technology also brings in high nuisance alarm rates (NARs) in real applications. In this paper, feature extraction methods of wavelet decomposition (WD) and wavelet packet decomposition (WPD) are comparatively studied for three typical field testing signals, and an artificial neural network (ANN) is built for the event identification. The comparison results prove that the WPD performs a little better than the WD for the DOVS signal analysis and identification in oil pipeline safety monitoring. The identification rate can be improved up to 94.4%, and the nuisance alarm rate can be effectively controlled as low as 5.6% for the identification network with the wavelet packet energy distribution features.

  3. Optimal distribution of integration time for intensity measurements in Stokes polarimetry.

    Science.gov (United States)

    Li, Xiaobo; Liu, Tiegen; Huang, Bingjing; Song, Zhanjie; Hu, Haofeng

    2015-10-19

    We consider the typical Stokes polarimetry system, which performs four intensity measurements to estimate a Stokes vector. We show that if the total integration time of intensity measurements is fixed, the variance of the Stokes vector estimator depends on the distribution of the integration time at four intensity measurements. Therefore, by optimizing the distribution of integration time, the variance of the Stokes vector estimator can be decreased. In this paper, we obtain the closed-form solution of the optimal distribution of integration time by employing Lagrange multiplier method. According to the theoretical analysis and real-world experiment, it is shown that the total variance of the Stokes vector estimator can be significantly decreased about 40% in the case discussed in this paper. The method proposed in this paper can effectively decrease the measurement variance and thus statistically improves the measurement accuracy of the polarimetric system.

  4. Optimal distribution of integration time for intensity measurements in degree of linear polarization polarimetry.

    Science.gov (United States)

    Li, Xiaobo; Hu, Haofeng; Liu, Tiegen; Huang, Bingjing; Song, Zhanjie

    2016-04-04

    We consider the degree of linear polarization (DOLP) polarimetry system, which performs two intensity measurements at orthogonal polarization states to estimate DOLP. We show that if the total integration time of intensity measurements is fixed, the variance of the DOLP estimator depends on the distribution of integration time for two intensity measurements. Therefore, by optimizing the distribution of integration time, the variance of the DOLP estimator can be decreased. In this paper, we obtain the closed-form solution of the optimal distribution of integration time in an approximate way by employing Delta method and Lagrange multiplier method. According to the theoretical analyses and real-world experiments, it is shown that the variance of the DOLP estimator can be decreased for any value of DOLP. The method proposed in this paper can effectively decrease the measurement variance and thus statistically improve the measurement accuracy of the polarimetry system.

  5. A 6-month analysis of training-intensity distribution and physiological adaptation in Ironman triathletes.

    Science.gov (United States)

    Neal, Craig M; Hunter, Angus M; Galloway, Stuart D R

    2011-11-01

    In the present study, we analysed the training-intensity distribution and physiological adaptations over a 6-month period preceding an Ironman triathlon race. Ten athletes (mean ± s: age 43 ± 3 years, mass 78.3 ± 10.3 kg, stature 1.79 ± 0.05 m) participated in the study. The study consisted of three training periods (A, B, C), each of approximately 2 months' duration, and four testing weeks. Testing consisted of incremental tests to exhaustion for swimming, cycling and running, and assessments for anthropometry plus cardiovascular and pulmonary measures. The lactate threshold and the lactate turnpoint were used to demarcate three discipline-specific, exercise-intensity zones. The mean percentage of time spent in zones 1, 2, and 3 was 69 ± 9%, 25 ± 8%, and 6 ± 2% for periods A-C combined. Only modest physiological adaptation occurred throughout the 6-month period, with small to moderate effect sizes at best. Relationships between the training volume/training load and the training-intensity distribution with the changes in key measures of adaptation were weak and probably reflect differences in initial training status. Our results suggest that the effects of intensity distribution are small over short-term training periods and future experimental research is needed to clarify the potential impact of intensity distribution on physiological adaptation.

  6. Mapping the continuous reciprocal space intensity distribution of X-ray serial crystallography.

    Science.gov (United States)

    Yefanov, Oleksandr; Gati, Cornelius; Bourenkov, Gleb; Kirian, Richard A; White, Thomas A; Spence, John C H; Chapman, Henry N; Barty, Anton

    2014-07-17

    Serial crystallography using X-ray free-electron lasers enables the collection of tens of thousands of measurements from an equal number of individual crystals, each of which can be smaller than 1 µm in size. This manuscript describes an alternative way of handling diffraction data recorded by serial femtosecond crystallography, by mapping the diffracted intensities into three-dimensional reciprocal space rather than integrating each image in two dimensions as in the classical approach. We call this procedure 'three-dimensional merging'. This procedure retains information about asymmetry in Bragg peaks and diffracted intensities between Bragg spots. This intensity distribution can be used to extract reflection intensities for structure determination and opens up novel avenues for post-refinement, while observed intensity between Bragg peaks and peak asymmetry are of potential use in novel direct phasing strategies.

  7. Sound radiation from an infinite elastic cylinder with dual-wave propagation-intensity distributions

    Science.gov (United States)

    Fuller, C. R.

    1988-01-01

    The radiation of sound from an elastic cylindrical shell filled with fluid and supporting multiwave propagation is studied analytically. Combinations of supersonic and subsonic shell waves are considered. The radiated field is mapped by using acoustic intensity vectors evaluated at various locations. Both time averaged and instantaneous intensity are investigated. The acoustic intensity is seen to vary markedly with axial distance down the cylinder. The effect is shown to be associated with cross terms in the intensity relations, and its magnitude and location to depend upon the relative phase and amplitudes of individual waves. Subsonic shell waves are demonstrated to interact strongly with supersonic shell waves to cause a large modification in the radiated intensity distributions near the shell surface.

  8. What is best practice for training intensity and duration distribution in endurance athletes?

    Science.gov (United States)

    Seiler, Stephen

    2010-09-01

    Successful endurance training involves the manipulation of training intensity, duration, and frequency, with the implicit goals of maximizing performance, minimizing risk of negative training outcomes, and timing peak fitness and performances to be achieved when they matter most. Numerous descriptive studies of the training characteristics of nationally or internationally competitive endurance athletes training 10 to 13 times per week seem to converge on a typical intensity distribution in which about 80% of training sessions are performed at low intensity (2 mM blood lactate), with about 20% dominated by periods of high-intensity work, such as interval training at approx. 90% VO2max. Endurance athletes appear to self-organize toward a high-volume training approach with careful application of high-intensity training incorporated throughout the training cycle. Training intensification studies performed on already well-trained athletes do not provide any convincing evidence that a greater emphasis on high-intensity interval training in this highly trained athlete population gives long-term performance gains. The predominance of low-intensity, long-duration training, in combination with fewer, highly intensive bouts may be complementary in terms of optimizing adaptive signaling and technical mastery at an acceptable level of stress.

  9. Scattering of electromagnetic waves by charged spheres: near-field external intensity distribution.

    Science.gov (United States)

    Kocifaj, Miroslav; Klačka, Jozef

    2012-01-15

    This Letter treats the scattering of electromagnetic waves by an electrically charged spherical particle in near-field approximation. Particular attention is paid to the external intensity distribution at the outer edges of the particle. The difference between scattering by a charged sphere and an electrically neutral sphere is significant only when size parameters exceed unity.

  10. Enhancement of sweetness intensity in gels by inhomogeneous distribution of sucrose

    NARCIS (Netherlands)

    Mosca, A.C.; Velde, van de F.; Bult, J.H.F.; Boekel, van M.A.J.S.; Stieger, M.A.

    2010-01-01

    Model systems consisting of layers of mixed agar/gelatin gel were used to investigate the effect of the spatial distribution of sucrose on perceived sweetness intensity. 2-Alternative forced choice tests were performed with consumers to compare the sweetness of layered samples with an inhomogeneous

  11. Topology Optimization of Distributed Mass Dampers for Low-frequency Vibration Suppression

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard; Lazarov, Boyan Stefanov

    2007-01-01

    In this paper the method of topology optimization is used to find optimized parameter distributions for a multiple mass damper system with the purpose of minimizing the low-frequency steady-state response of a carrier structure. An effective density model that describes the steady-state effect...... of the dampers is derived based on a continuous approximation of the damper distribution. The dampers are optimized with respect to the point-wise distribution of mass ratio, natural frequency, and damping ratio....

  12. A Network-Aware Distributed Storage Cache for Data Intensive Environments

    Energy Technology Data Exchange (ETDEWEB)

    Tierney, B.L.; Lee, J.R.; Johnston, W.E.; Crowley, B.; Holding, M.

    1999-12-23

    Modern scientific computing involves organizing, moving, visualizing, and analyzing massive amounts of data at multiple sites around the world. The technologies, the middleware services, and the architectures that are used to build useful high-speed, wide area distributed systems, constitute the field of data intensive computing. In this paper the authors describe an architecture for data intensive applications where they use a high-speed distributed data cache as a common element for all of the sources and sinks of data. This cache-based approach provides standard interfaces to a large, application-oriented, distributed, on-line, transient storage system. They describe their implementation of this cache, how they have made it network aware, and how they do dynamic load balancing based on the current network conditions. They also show large increases in application throughput by access to knowledge of the network conditions.

  13. The influence of distribution of hydroxyl groups on vibrational spectra of fullerenol C60(OH)24 isomers: DFT study.

    Science.gov (United States)

    Dawid, A; Górny, K; Gburski, Z

    2015-02-05

    The infrared and Raman spectra of C60(OH)24 molecule with uniform and non-uniform distribution of hydroxyl groups have been investigated using first principle DFT calculations at the B3LYP/6-31G(d,p) level of theory. The important features of the obtained geometries have been measured and compared to experimental results. The reference calculations of C60 molecule geometry and vibrational spectra have been made and compared to available experimental data. The striking differences of infrared spectra between C60(OH)24 molecule with uniform and non-uniform distribution of hydroxyl groups have been shown and discussed. The OH modes have been identified as the most sensitive to C60(OH)24 isomer configuration. The C-C stretching modes in the Raman spectra of the C60(OH)24 molecule have been found as a potential sensor of OH groups distribution over fullerene C60 surface. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Effect of spatial distribution of tastants on taste intensity, fluctuation of taste intensity and consumer preference of (semi-)solid food products

    NARCIS (Netherlands)

    Mosca, A.C.; Bult, J.H.F.; Stieger, M.A.

    2013-01-01

    Two sensory studies were carried out to compare the taste intensity, the perceived fluctuation of taste intensity and the consumer preference of food products with homogeneous and inhomogeneous distributions of tastants using 2-alternative forced choice tests. The first study evaluated pairs of

  15. In Situ Three-Dimensional Reciprocal-Space Mapping of Diffuse Scattering Intensity Distribution and Data Analysis for Precursor Phenomenon in Shape-Memory Alloy

    Science.gov (United States)

    Cheng, Tian-Le; Ma, Fengde D.; Zhou, Jie E.; Jennings, Guy; Ren, Yang; Jin, Yongmei M.; Wang, Yu U.

    2012-01-01

    Diffuse scattering contains rich information on various structural disorders, thus providing a useful means to study the nanoscale structural deviations from the average crystal structures determined by Bragg peak analysis. Extraction of maximal information from diffuse scattering requires concerted efforts in high-quality three-dimensional (3D) data measurement, quantitative data analysis and visualization, theoretical interpretation, and computer simulations. Such an endeavor is undertaken to study the correlated dynamic atomic position fluctuations caused by thermal vibrations (phonons) in precursor state of shape-memory alloys. High-quality 3D diffuse scattering intensity data around representative Bragg peaks are collected by using in situ high-energy synchrotron x-ray diffraction and two-dimensional digital x-ray detector (image plate). Computational algorithms and codes are developed to construct the 3D reciprocal-space map of diffuse scattering intensity distribution from the measured data, which are further visualized and quantitatively analyzed to reveal in situ physical behaviors. Diffuse scattering intensity distribution is explicitly formulated in terms of atomic position fluctuations to interpret the experimental observations and identify the most relevant physical mechanisms, which help set up reduced structural models with minimal parameters to be efficiently determined by computer simulations. Such combined procedures are demonstrated by a study of phonon softening phenomenon in precursor state and premartensitic transformation of Ni-Mn-Ga shape-memory alloy.

  16. Tennis Play Intensity Distribution and Relation with Aerobic Fitness in Competitive Players.

    Directory of Open Access Journals (Sweden)

    Ernest Baiget

    Full Text Available The aims of this study were (i to describe the relative intensity of simulated tennis play based on the cumulative time spent in three metabolic intensity zones, and (ii to determine the relationships between this play intensity distribution and the aerobic fitness of a group of competitive players. 20 male players of advanced to elite level (ITN performed an incremental on-court specific endurance tennis test to exhaustion to determine maximal oxygen uptake (VO2max and the first and second ventilatory thresholds (VT1, VT2. Ventilatory and gas exchange parameters were monitored using a telemetric portable gas analyser (K4 b2, Cosmed, Rome, Italy. Two weeks later the participants played a simulated tennis set against an opponent of similar level. Intensity zones (1: low, 2: moderate, and 3: high were delimited by the individual VO2 values corresponding to VT1 and VT2, and expressed as percentage of maximum VO2 and heart rate. When expressed relative to VO2max, percentage of playing time in zone 1 (77 ± 25% was significantly higher (p < 0.001 than in zone 2 (20 ± 21% and zone 3 (3 ± 5%. Moderate to high positive correlations were found between VT1, VT2 and VO2max, and the percentage of playing time spent in zone 1 (r = 0.68-0.75, as well as low to high inverse correlations between the metabolic variables and the percentage of time spent in zone 2 and 3 (r = -0.49-0.75. Players with better aerobic fitness play at relatively lower intensities. We conclude that players spent more than 75% of the time in their low-intensity zone, with less than 25% of the time spent at moderate to high intensities. Aerobic fitness appears to determine the metabolic intensity that players can sustain throughout the game.

  17. Tennis Play Intensity Distribution and Relation with Aerobic Fitness in Competitive Players.

    Science.gov (United States)

    Baiget, Ernest; Fernández-Fernández, Jaime; Iglesias, Xavier; Rodríguez, Ferran A

    2015-01-01

    The aims of this study were (i) to describe the relative intensity of simulated tennis play based on the cumulative time spent in three metabolic intensity zones, and (ii) to determine the relationships between this play intensity distribution and the aerobic fitness of a group of competitive players. 20 male players of advanced to elite level (ITN) performed an incremental on-court specific endurance tennis test to exhaustion to determine maximal oxygen uptake (VO2max) and the first and second ventilatory thresholds (VT1, VT2). Ventilatory and gas exchange parameters were monitored using a telemetric portable gas analyser (K4 b2, Cosmed, Rome, Italy). Two weeks later the participants played a simulated tennis set against an opponent of similar level. Intensity zones (1: low, 2: moderate, and 3: high) were delimited by the individual VO2 values corresponding to VT1 and VT2, and expressed as percentage of maximum VO2 and heart rate. When expressed relative to VO2max, percentage of playing time in zone 1 (77 ± 25%) was significantly higher (p playing time spent in zone 1 (r = 0.68-0.75), as well as low to high inverse correlations between the metabolic variables and the percentage of time spent in zone 2 and 3 (r = -0.49-0.75). Players with better aerobic fitness play at relatively lower intensities. We conclude that players spent more than 75% of the time in their low-intensity zone, with less than 25% of the time spent at moderate to high intensities. Aerobic fitness appears to determine the metabolic intensity that players can sustain throughout the game.

  18. Intensity fluctuation of a gain-switched semiconductor laser for quantum key distribution systems.

    Science.gov (United States)

    Nakata, Kensuke; Tomita, Akihisa; Fujiwara, Mikio; Yoshino, Ken-Ichiro; Tajima, Akio; Okamoto, Atsushi; Ogawa, Kazuhisa

    2017-01-23

    Security certification of quantum key distribution (QKD) systems under practical conditions is necessary for social deployment. This article focused on the transmitter, and, in particular, investigated the intensity fluctuation of the optical pulses emitted by a gain-switched semiconductor laser used in QKD systems implementing decoy-BB84 protocol. A large intensity fluctuation was observed for low excitation, showing strong negative correlation between the adjacent pulses, which would affect the final key rate. The fluctuation decreased and the correlation disappeared as excitation increased. Simulation with rate equations successfully reproduced the experimental results and revealed that the large fluctuation originates from an intrinsic instability of gain-switched lasers driven periodically at a rate comparable to the inverse of carrier lifetime, as in GHz-clock QKD systems. Methods for further reduction of the intensity fluctuation were also discussed.

  19. Evaluation and Calibration of LCoS SLM for Direct Laser Structuring with Tailored Intensity Distributions

    Science.gov (United States)

    Strauß, Johannes; Häfner, Tom; Dobler, Michael; Heberle, Johannes; Schmidt, Michael

    Tailored intensity distribution enables efficient microstructuring as the maximum pulse energy of an ultrashort-pulsed laser can be applied. Dynamic adaptation of the intensity profile can be realized by holographic laser beam shaping using phase-only liquid crystal on silicon (LCoS) displays as a spatial light modulator (SLM). To achieve the desired intensity profile at the focal plane an accurate phase retardation of the SLM's liquid crystals has to be guaranteed. In this publication we present the phase calibration of three LCoS SLM from different manufacturers. Each system is evaluated for direct laser structuring applications. As one of the tested SLM show a spatially nonlinear behavior, a compensation method proposed by Engström et al. in 2013 is applied. Finally, the necessity of this phase calibration is presented and discussed by applying a squared flat-top profile.

  20. Local distributed estimation. [for flexible spacecraft vibration mode optimal feedback control

    Science.gov (United States)

    Schaechter, D. B.

    1980-01-01

    Based on partial differential equations of motion the closed form solution for the optimal estimation of a spatially continuous state vector is derived, using a continuously distributed sensor. Local control is shown to be the feedback that minimizes a quadratic performance index of sensor and process disturbances. A detailed example of the control of a string in tension is presented.

  1. Vibration Analysis of Inclined Laminated Composite Beams under Moving Distributed Masses

    Directory of Open Access Journals (Sweden)

    E. Bahmyari

    2014-01-01

    Full Text Available The dynamic response of laminated composite beams subjected to distributed moving masses is investigated using the finite element method (FEM based on the both first-order shear deformation theory (FSDT and the classical beam theory (CLT. Six and ten degrees of freedom beam elements are used to discretize the CLT and FSDT equations of motion, respectively. The resulting spatially discretized beam governing equations including the effect of inertial, Coriolis, and centrifugal forces due to moving distributed mass are evaluated in time domain by applying Newmark’s scheme. The presented approach is first validated by studying its convergence behavior and comparing the results with those of existing solutions in the literature. Then, the effect of incline angle, mass, and velocity of moving body, layer orientation, load length, and inertial, Coriolis, and centrifugal forces due to the moving distributed mass and friction force between the beam and the moving distributed mass on the dynamic behavior of inclined laminated composite beams are investigated.

  2. Inertial particles distribute in turbulence as Poissonian points with random intensity inducing clustering and supervoiding

    CERN Document Server

    Schmidt, Lukas; Holzner, Markus

    2016-01-01

    This work considers the distribution of inertial particles in turbulence using the point-particle approximation. We demonstrate that the random point process formed by the positions of particles in space is a Poisson point process with log-normal random intensity ("log Gaussian Cox process" or LGCP). The probability of having a finite number of particles in a small volume is given in terms of the characteristic function of a log-normal distribution. Corrections due to discreteness of the number of particles to the previously derived statistics of particle concentration in the continuum limit are provided. These are relevant for dealing with experimental or numerical data. The probability of having regions without particles, i.e. voids, is larger for inertial particles than for tracer particles where voids are distributed according to Poisson processes. Further, the probability of having large voids decays only log-normally with size. This shows that particles cluster, leaving voids behind. At scales where the...

  3. Characterizing Flow-Induced Vibrations of Fuel Assemblies for Future Liquid Metal Cooled Nuclear Reactors Using Quasi-Distributed Fibre-Optic Sensors

    Directory of Open Access Journals (Sweden)

    Ben De Pauw

    2017-08-01

    Full Text Available Excessive vibration of nuclear reactor components, such as the heat exchanger or the fuel assembly should be avoided as these can compromise the lifetime of these components and potentially lead to safety hazards. This issue is particularly relevant to new reactor designs that use liquid metal coolants. However, identifying adequate sensors or techniques that can be successfully applied to record the vibrations of the components in a flow of liquid metal at elevated temperatures is very challenging. In this paper, we demonstrate the precise measurements of the vibrations of a very representative mock-up of a fuel assembly in a lead-bismuth eutectic cooled installation using quasi-distributed fibre Bragg grating (FBG based sensors. The unique properties of these sensors, in combination with a dedicated integration and mounting approach, allows for accounting of the severe geometrical constraints and allows characterizing the vibration of the fuel assembly elements under nominal operation conditions. To that aim, we instrumented a single fuel pin within the fuel assembly with 84 FBGs, and conducted spectral measurements with an acquisition rate of up to 5000 measurements per second, enabling the monitoring of local strains of a few με. These measurements provide the information required to assess vibration-related safety hazards.

  4. Modal Density and Modal Distribution of Bending Wave Vibration Fields in Ribbed Plates

    DEFF Research Database (Denmark)

    Dickow, Kristoffer Ahrens; Brunskog, Jonas; Ohlrich, Mogens

    2013-01-01

    Plates reinforced by ribs or joists are common elements in lightweight building structures, as well as in other engineering structures such as vehicles, ships, and aircraft. These structures, however, are often not well suited for simple structural acoustic prediction models such as statistical...... energy analysis. One reason is that the modal density is not uniformly distributed due to the spatial periodicity introduced by the ribs. This phenomenon is investigated in the present paper, using a modal model of a ribbed plate. The modal model uses the Fourier sine modes, and the coupling between...... the plate and ribs is incorporated using Hamilton’s principle. This model is then used to investigate the modal density of the considered spatially periodic structure, and a grouping of the modes in different dominating directions is proposed. Suggestions are also given regarding how to proceed towards...

  5. Modal density and modal distribution of bending wave vibration fields in ribbed plates

    DEFF Research Database (Denmark)

    Dickow, Kristoffer Ahrens; Brunskog, Jonas; Ohlrich, Mogens

    2013-01-01

    Plates reinforced by ribs or joists are common elements in lightweight building structures, as well as in other engineering structures such as vehicles, ships, and aircraft. These structures, however, are often not well suited for simple structural acoustic prediction models such as statistical...... energy analysis. One reason is that the modal density is not uniformly distributed due to the spatial periodicity introduced by the ribs. This phenomenon is investigated in the present paper, using a modal model of a ribbed plate. The modal model uses the Fourier sine modes, and the coupling between...... the plate and ribs is incorporated using Hamilton's principle. This model is then used to investigate the modal density of the considered spatially periodic structure, and a grouping of the modes in different dominating directions is proposed. Suggestions are also given regarding how to proceed towards...

  6. Optical quasi-distributed simultaneous vibration and temperature sensing in stator bars of a 370-MVA electric generator

    Science.gov (United States)

    Dreyer, Uilian José; Vagner da Silva, Erlon; Martelli, Cicero; Cardozo da Silva, Jean Carlos

    2017-08-01

    In this paper, we propose a new multiparametric optical fiber transducer applied to an electric generator of 370 MVA. The optical transducer has three multiplexed FBGs in the same optical fiber as the sensing element. The FBG sensors can simultaneously measure both the temperature and vibration independently of the other multiplexed FBGs. The installation in the power plant was performed using six transducers and it was obtained 23 hours of simultaneous vibration and temperature measurement. All the FBGs used to monitor generator vibration were able to monitor the frequency of mechanical and electromagnetic vibrations, which were measured at 2 Hz and 120 Hz, respectively. During the measurement, the machine was turned off due to a failure and all the FBGs sensed temperature changes, as well as frequency vibration changes. The largest temperature difference measured between the FBGs during the test is approximately 2°C.

  7. The intensity distribution among well-trained and elite endurance athletes

    Directory of Open Access Journals (Sweden)

    Thomas Leonhard Stöggl

    2015-10-01

    Full Text Available Researchers have retrospectively analyzed the training intensity distribution (TID of nationally and internationally competitive athletes in different endurance disciplines to determine the optimal volume and intensity for maximal adaptation. The majority of studies present a pyramidal TID with a high proportion of high volume, low intensity training (HVLIT. World-class athletes appear to adopt a so-called polarized TID (i.e. significant % of HVLIT and high-intensity training, rather than a pyramidal or threshold (THR TID. In contrast to the pyramidal TID, emerging prospective randomized controlled studies have demonstrated superior responses of variables related to endurance when applying a polarized TID in well-trained and recreational individuals. The aims of the present review are to: 1 summarize the main responses of retrospective and prospective studies exploring TID; 2 provide a systematic overview on TIDs during preparation, pre-competition, and competition phases in different endurance disciplines and performance levels; 3 address whether one TID has demonstrated greater efficacy than another; and 4 highlight research gaps in an effort to direct future scientific studies.

  8. Impacts of Fog Characteristics, Forward Illumination, and Warning Beacon Intensity Distribution on Roadway Hazard Visibility

    Directory of Open Access Journals (Sweden)

    John D. Bullough

    2016-01-01

    Full Text Available Warning beacons are critical for the safety of transportation, construction, and utility workers. These devices need to produce sufficient luminous intensity to be visible without creating glare to drivers. Published standards for the photometric performance of warning beacons do not address their performance in conditions of reduced visibility such as fog. Under such conditions light emitted in directions other than toward approaching drivers can create scattered light that makes workers and other hazards less visible. Simulations of visibility of hazards under varying conditions of fog density, forward vehicle lighting, warning beacon luminous intensity, and intensity distribution were performed to assess their impacts on visual performance by drivers. Each of these factors can influence the ability of drivers to detect and identify workers and hazards along the roadway in work zones. Based on the results, it would be reasonable to specify maximum limits on the luminous intensity of warning beacons in directions that are unlikely to be seen by drivers along the roadway, limits which are not included in published performance specifications.

  9. The training intensity distribution among well-trained and elite endurance athletes

    Science.gov (United States)

    Stöggl, Thomas L.; Sperlich, Billy

    2015-01-01

    Researchers have retrospectively analyzed the training intensity distribution (TID) of nationally and internationally competitive athletes in different endurance disciplines to determine the optimal volume and intensity for maximal adaptation. The majority of studies present a “pyramidal” TID with a high proportion of high volume, low intensity training (HVLIT). Some world-class athletes appear to adopt a so-called “polarized” TID (i.e., significant % of HVLIT and high-intensity training) during certain phases of the season. However, emerging prospective randomized controlled studies have demonstrated superior responses of variables related to endurance when applying a polarized TID in well-trained and recreational individuals when compared with a TID that emphasizes HVLIT or threshold training. The aims of the present review are to: (1) summarize the main responses of retrospective and prospective studies exploring TID; (2) provide a systematic overview on TIDs during preparation, pre-competition, and competition phases in different endurance disciplines and performance levels; (3) address whether one TID has demonstrated greater efficacy than another; and (4) highlight research gaps in an effort to direct future scientific studies. PMID:26578968

  10. The training intensity distribution among well-trained and elite endurance athletes.

    Science.gov (United States)

    Stöggl, Thomas L; Sperlich, Billy

    2015-01-01

    Researchers have retrospectively analyzed the training intensity distribution (TID) of nationally and internationally competitive athletes in different endurance disciplines to determine the optimal volume and intensity for maximal adaptation. The majority of studies present a "pyramidal" TID with a high proportion of high volume, low intensity training (HVLIT). Some world-class athletes appear to adopt a so-called "polarized" TID (i.e., significant % of HVLIT and high-intensity training) during certain phases of the season. However, emerging prospective randomized controlled studies have demonstrated superior responses of variables related to endurance when applying a polarized TID in well-trained and recreational individuals when compared with a TID that emphasizes HVLIT or threshold training. The aims of the present review are to: (1) summarize the main responses of retrospective and prospective studies exploring TID; (2) provide a systematic overview on TIDs during preparation, pre-competition, and competition phases in different endurance disciplines and performance levels; (3) address whether one TID has demonstrated greater efficacy than another; and (4) highlight research gaps in an effort to direct future scientific studies.

  11. Mercury distribution in a mangrove tidal creek affected by intensive shrimp farming.

    Science.gov (United States)

    Costa, B G B; Soares, T M; Torres, R F; Lacerda, L D

    2013-05-01

    In this study, the Hg distributions in water and sediments from a mangrove creek that receives intensive shrimp farming effluents were determined. The average dissolved and particulate Hg concentrations in the water varied from 3.1 to 9.2 ng L(-1) and from 4.4 to 9.4 ng L(-1), respectively. However, the Hg concentrations in the suspended particulate matter and the bottom sediments varied from 95.4 to 115.7 ng g(-1) and from 1.6 to 10.3 ng g(-1), respectively. A Ward quadratic distance cluster analysis based on the Hg concentrations and hydro- and geochemical parameters (oxygen, salinity, temperature, pH, and organic matter and aluminum content) showed the effects of shrimp farming effluents on the Hg distribution pattern. Furthermore, these results were supported by the Hg distribution in the sediment cores. This study emphasizes the necessity of including Hg as a potential pollutant when monitoring the environmental impacts of intensive shrimp farming.

  12. Turkish nurses' decision making in the distribution of intensive care beds.

    Science.gov (United States)

    Ersoy, Nermin; Akpinar, Aslihan

    2010-01-01

    The aim of this study was to assess the opinions and role of intensive care unit (ICU) nurses regarding the distribution of ICU beds. We conducted this research among 30% of the attendees at two ICU congresses in Turkey. A self-administered questionnaire was used, which included 13 cases and allocation criteria. Of the total (136 nurses), 53.7% participated in admission/discharge decisions. The most important criterion was quality of life as viewed by the physician; the least important was the patient's social status. According to the findings, the nurses thought that medical benefit and avoiding discrimination were important. On the other hand their ignorance of patients' autonomous preferences arouses suspicions about these nurses' role in advocating for patients' rights. For this reason, nurses' role in allocation decisions should be clearly described and should also be the basis on which intensive care nurses' duties in allocation decisions should be determined.

  13. Spatially intensive sampling by electrofishing for assessing longitudinal discontinuities in fish distribution in a headwater stream

    Science.gov (United States)

    Le Pichon, Céline; Tales, Évelyne; Belliard, Jérôme; Torgersen, Christian E.

    2017-01-01

    Spatially intensive sampling by electrofishing is proposed as a method for quantifying spatial variation in fish assemblages at multiple scales along extensive stream sections in headwater catchments. We used this method to sample fish species at 10-m2 points spaced every 20 m throughout 5 km of a headwater stream in France. The spatially intensive sampling design provided information at a spatial resolution and extent that enabled exploration of spatial heterogeneity in fish assemblage structure and aquatic habitat at multiple scales with empirical variograms and wavelet analysis. These analyses were effective for detecting scales of periodicity, trends, and discontinuities in the distribution of species in relation to tributary junctions and obstacles to fish movement. This approach to sampling riverine fishes may be useful in fisheries research and management for evaluating stream fish responses to natural and altered habitats and for identifying sites for potential restoration.

  14. Correlation of Red Blood Cell Aggregate Size with Transmitted Light Intensity Distributions

    Science.gov (United States)

    Hitt, Darren L.

    1998-11-01

    Under sufficiently low shear rates, such as those encountered in the microcirculation, human red blood cells are known to form aggregate structures (`rouleaux'). These aggregates may range in size from a simple chain containing only a few cells to complex three-dimensional structures containing tens of cells. Previous studies have attempted to characterize the aggregate size by examining the spatial distribution of transmitted light intensity resulting from transillumination of the blood flow. For experiments performed in vitro and in vivo, spectral analysis of the transmitted light intensities has shown that the presence of aggregates in the flow can linked with an increase in the spectral power at small wavenumbers. The magnitudes of the affected wavenumbers correspond to structures considerably larger than individual cells. A precise numerical correlation, however, is difficult to establish. In this work, computer simulations of aggregating blood flow are used along with statistical considerations in an attempt to better correlate the observed spectral trends with actual aggregate size.

  15. Quantitative infrared and near-infrared gas-phase spectra for pyridine: Absolute intensities and vibrational assignments

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, T. J.; Aker, P. M.; Scharko, N. K.; Williams, S. D.

    2018-02-01

    Using vetted methods for generating quantitative absorption reference data, broadband infrared and near-infrared spectra (total range 11,000 – 600 cm-1) of pyridine vapor were recorded at 0.1 cm-1 spectral resolution, with the analyte thermostatted at 298 K and pressure-broadened to 1 atmosphere using N2 ballast gas. The quantitative spectrum is reported for the first time, and we have re-assigned some of the 27 fundamental modes. Fundamental assignments were confirmed by IR vapor phase band shapes, FT-Raman measurements and comparison with previous analyses. For the 760-Torr vapor-phase IR data several bands show resolved peaks (Q-branches). We have also assigned for the first time hundreds of combination and overtone bands in the mid- and near-IR. All assignments were made via comparison to theoretically calculated frequencies and intensities: The frequencies were computed with Gaussian03 with the anharmonic option, using MP2 and the ccpvtz basis set. The intensities were taken from a VSCF calculation in GAMESS using Hartree-Fock (for overtones and combination bands) or from the harmonic MP2 for fundamentals. Overtone and combination band harmonic and anharmonic frequencies, as well as intensities were also calculated using the CFOUR program. It is seen in the NIR spectrum near 6000 cm-1 that the very strong bands arise from the C-H first overtones, whereas only much weaker bands are observed for combination bands of C-H stretching modes. Certain features are discussed for their potential utility for atmospheric monitoring.

  16. Non-uniform sound intensity distributions when measuring absorption coefficients in reverberation chambers using a phased beam tracing

    DEFF Research Database (Denmark)

    Jeong, Cheol-Ho

    2010-01-01

    that a test specimen was attached to a vertical surface and the floor. The frequency-dependent sound intensity distributions on absorbers were found to be affected by the reverberation chamber geometry and dimensions, the absorption capability of the specimen, and the placement of the specimen. High frequency...... intensity distributions above 1 kHz were similar for all studied cases, but some variations in low frequency intensity distributions were observed. If the non-uniform intensity distribution and a finite size effect are taken into account for correcting the theoretical absorption coefficients, a good...... agreement is found between corrected and measured statistical absorption coefficients. The non-uniform sound intensity can account for the discrepancy at high frequencies....

  17. Distributed acoustic and vibration sensing via optical fractional Fourier transform reflectometry.

    Science.gov (United States)

    Shiloh, Lihi; Eyal, Avishay

    2015-02-23

    Distributed acoustic sensing has been traditionally implemented using optical reflectometry. Here we describe an alternative to the common interrogation approaches. According to the new method the frequency of the source is varied sinusoidally with time. For a sufficiently high scan frequency there is a position along the fiber,  z(0), for which the roundtrip time is half the scan period. Back-reflections from this point will generate a linear chirp at the receiver output. The Fractional Fourier Transform (FrFT) is used to analyze the receiver output and yields the reflection profile at z(0) and its vicinity. The method, which enables high spatial resolution at long distances with high scan rates, is demonstrated by detecting deliberate perturbations in the Rayleigh backscatter profile at the end of a 20km fiber with a scanning frequency of ~2.5kHz. The spatial resolution at this range and scan-rate is characterized by a measurement of the backscatter profile from a FBG's-array and is found to be ~2.8m.

  18. Prediction of thermal coagulation from the instantaneous strain distribution induced by high-intensity focused ultrasound

    Science.gov (United States)

    Iwasaki, Ryosuke; Takagi, Ryo; Tomiyasu, Kentaro; Yoshizawa, Shin; Umemura, Shin-ichiro

    2017-07-01

    The targeting of the ultrasound beam and the prediction of thermal lesion formation in advance are the requirements for monitoring high-intensity focused ultrasound (HIFU) treatment with safety and reproducibility. To visualize the HIFU focal zone, we utilized an acoustic radiation force impulse (ARFI) imaging-based method. After inducing displacements inside tissues with pulsed HIFU called the push pulse exposure, the distribution of axial displacements started expanding and moving. To acquire RF data immediately after and during the HIFU push pulse exposure to improve prediction accuracy, we attempted methods using extrapolation estimation and applying HIFU noise elimination. The distributions going back in the time domain from the end of push pulse exposure are in good agreement with tissue coagulation at the center. The results suggest that the proposed focal zone visualization employing pulsed HIFU entailing the high-speed ARFI imaging method is useful for the prediction of thermal coagulation in advance.

  19. Spatial Distributions of Tropical Cyclone Tornadoes by Intensity and Size Characteristics

    Directory of Open Access Journals (Sweden)

    Todd W. Moore

    2017-08-01

    Full Text Available Tropical cyclones that make landfall often spawn tornadoes. Previous studies have shown that these tornadoes are not uniformly distributed in the United States or in the tropical cyclone environment. They show that tornadoes tend to occur relatively close to the coastline and that they tend to cluster to the east-of-center in the tropical cyclone environment, particularly in the northeast and east-of-center quadrants. This study contributes to these studies by analyzing the spatial distributions of tropical cyclone tornadoes by intensity, path length, path width, and the damage potential index. The analyses confirm that most tornadoes occur relatively close to the coastline, but show that stronger tornadoes with larger paths are disproportionately common farther inland. They also confirm that the highest amount of activity is located within the northeast and east-of-center quadrants and show that the most potentially damaging tornadoes cluster in a sub region near the intersection of these two quadrants.

  20. Measurement of neutron and γ-ray intensity distributions with an optical fiber-scintillator detector

    Science.gov (United States)

    Mori, C.; Uritani, A.; Miyahara, H.; Iguchi, T.; Shiroya, S.; Kobayashi, K.; Takada, E.; Fleming, R. F.; Dewaraja, Y. K.; Stuenkel, D.; Knoll, G. F.

    1999-02-01

    On the tip of an optical fiber, a very small amount of ZnS(Ag) scintillator mixed with neutron converter and adhesive paste was painted, which can be inserted into a narrow space and moved by a fiber-driving unit controlled with a personal computer. The presented method made it possible to measure neutron flux distributions in critical assemblies, research reactors or other neutron facilities with position resolution of less than 1 mm and in 10 min or so over a meter. As neutron converter, 6Li and 235U are good for thermal neutrons and 232Th is useful for fast neutrons. When a neutron converter is not used, the method can be applied to the measurement of γ-ray intensity distribution.

  1. 9-year distributions of rain intensities measured in Prague and their utilization in telecommunications

    Science.gov (United States)

    Kvicera, V.; Grabner, M.

    2012-04-01

    Experimental research in the Department of Frequency Engineering of the Czech Metrology Institute (CMI) in Prague, the Czech Republic, is focused on stability of received signals on terrestrial radio and optical communication paths. Hydrometeors (rain, snow, fog, hails) can cause serious attenuation of electromagnetic waves in the frequency bands above 10 GHz and the availability performances of terrestrial radio communication systems are seriously affected by heavy hydrometeors events. The rain intensity data is usually used for the calculations of attenuation due to rain on terrestrial radio links in accordance with either the relevant ITU-R Recommendation or other methods. Therefore, our experimental research is also focused on our own meteorological measurements in the vicinity of experimental radio and optical paths. The heated tipping-bucket rain gauge with the collector area of 500 cm2 and the rain amount per tip of 0.1 mm is used at CMI for the measurements of intensities of hydrometeors. The time of tips is recorded with uncertainty of 1 second. Hydrometeors intensity data obtained from January 2003 to December 2011 (9 years of observation) was statistically processed over the individual years. All the recorded individual hydrometeor events were compared with the concurrent meteorological conditions and were carefully categorized according to the types of individual hydrometeors, i.e. rain, rain with snow, rain with hails, snow, fog, fog with rain, fog with snow, and fog with rain and snow. The obtained cumulative distributions (CDs) of intensities of individual hydrometeors over 9 years of observation will be presented and compared with the CD of intensities of all hydrometeors together. The rain amounts were examined too. The obtained rain amounts for individual years and the average rain amounts for individual months over the 9-year period will be given. The obtained CD of average 1-minute rain intensities for the average year over the 9-year period of

  2. Free vibration analysis of straight-line beam regarded as distributed system by combining Wittrick-Williams algorithm and transfer dynamic stiffness coefficient method

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Myung Soo; Yang, Kyong Uk [Chonnam National University, Yeosu (Korea, Republic of); Kondou, Takahiro [Kyushu University, Fukuoka (Japan); Bonkobara, Yasuhiro [University of Miyazaki, Miyazaki (Japan)

    2016-03-15

    We developed a method for analyzing the free vibration of a structure regarded as a distributed system, by combining the Wittrick-Williams algorithm and the transfer dynamic stiffness coefficient method. A computational algorithm was formulated for analyzing the free vibration of a straight-line beam regarded as a distributed system, to explain the concept of the developed method. To verify the effectiveness of the developed method, the natural frequencies of straight-line beams were computed using the finite element method, transfer matrix method, transfer dynamic stiffness coefficient method, the exact solution, and the developed method. By comparing the computational results of the developed method with those of the other methods, we confirmed that the developed method exhibited superior performance over the other methods in terms of computational accuracy, cost and user convenience.

  3. Inertial particles distribute in turbulence as Poissonian points with random intensity inducing clustering and supervoiding

    Science.gov (United States)

    Schmidt, Lukas; Fouxon, Itzhak; Holzner, Markus

    2017-07-01

    This work considers the distribution of discrete inertial particles in turbulence. We demonstrate that even for weak inertia the distribution can be strongly different from the Poisson distribution that holds for tracers. We study the cases of weak inertia or strong gravity where single-valued particle flow holds in space. In these cases, the particles distribute over a random multifractal attractor in space. This attractor is characterized by fractal dimensions describing scaling exponents of moments of number of particles inside a ball with size much smaller than the viscous scale of turbulence. Previous studies used a continuum approach to the moments which requires having a large number of particles below the viscous scale. This condition often does not hold in practice; for instance, for water droplets in clouds there is typically one droplet per viscous scale. This condition is also hard to realize in numerical simulations. In this work, we overcome this difficulty by deriving the probability pl(k ) of having k particles in a ball of small radius l for which the continuum approximation may not hold. We demonstrate that the random point process formed by positions of particles' centers in space is a Poisson point process with log-normal random intensity (the so-called log Gaussian Cox process or LGCP). This gives pl(k ) in terms of the characteristic function of a log-normal distribution from which the moments are derived. This allows finding the correlation dimension relevant for statistics of particles' collisions. The case of zero number of particles provides the statistics of the size of voids—regions without particles—that were not studied previously. The probability of voids is increased compared to a random distribution of particles because preferential concentration of inertial particles implies voids in the deserted regions. Thus voids and preferential concentration are different reflections of the same phenomena. In the limit of tracers with zero

  4. Influence of X-ray tube spectral distribution on uncertainty of calculated fluorescent radiation intensity

    Energy Technology Data Exchange (ETDEWEB)

    Sitko, Rafal [Institute of Chemistry, Silesian University, 40-006 Katowice (Poland)], E-mail: rafal.sitko@us.edu.pl

    2007-08-15

    The relative radiation intensity (R{sub i}) defined as fluorescent radiation intensity of analyte in specimen to fluorescent radiation intensity of pure element or compound, e.g., oxide is used in calculation in both fundamental parameter methods and in theoretical influence coefficient algorithms. Accuracy of calculated R{sub i} is determined by uncertainties of atomic parameters, spectrometer geometry and also by X-ray tube spectral distribution. This paper presents the differences between R{sub i} calculated using experimental and theoretical X-ray tube spectra evaluated by three different algorithms proposed by Pella et al., Ebel, and Finkelshtein-Pavlova. The calculations are performed for the most common targets, i.e., Cr, Mo, Rh and W. In this study, R{sub i} is calculated for V, Cr, Mn, Fe, Co, Ni, Cu and Mo in steels as an example. The differences between R{sub i} calculated using different X-ray tube spectrum algorithms are presented when pure element standard, multielement standard similar to the analyzed material and one pure element standard for all analytes is used in X-ray fluorescence analysis. The differences between R{sub i} for intermediate-thickness samples (and also for thin films) and for X-ray tube, which ran for many hours, are also evaluated.

  5. Experimental observation of spatially resolved photo-luminescence intensity distribution in dual mode upconverting nanorod bundles

    Science.gov (United States)

    Kumar, Pawan; Singh, Satbir; Singh, V. N.; Singh, Nidhi; Gupta, R. K.; Gupta, Bipin Kumar

    2017-02-01

    A novel method for demonstration of photoluminescence intensity distribution in upconverting nanorod bundles using confocal microscopy is reported. Herein, a strategy for the synthesis of highly luminescent dual mode upconverting/downshift Y1.94O3:Ho3+0.02/Yb3+0.04 nanorod bundles by a facile hydrothermal route has been introduced. These luminescent nanorod bundles exhibit strong green emission at 549 nm upon excitations at 449 nm and 980 nm with quantum efficiencies of ~6.3% and ~1.1%, respectively. The TEM/HRTEM results confirm that these bundles are composed of several individual nanorods with diameter of ~100 nm and length in the range of 1-3 μm. Furthermore, two dimensional spatially resolved photoluminescence intensity distribution study has been carried out using confocal photoluminescence microscope throughout the nanorod bundles. This study provides a new direction for the potential use of such emerging dual mode nanorod bundles as photon sources for next generation flat panel optical display devices, bio-medical applications, luminescent security ink and enhanced energy harvesting in photovoltaic applications.

  6. Life satisfaction in subjects with long-term musculoskeletal pain in relation to pain intensity, pain distribution and coping

    National Research Council Canada - National Science Library

    Anke, Audny; Damsgård, Elin; Røe, Cecilie

    2013-01-01

    .... Cross-sectional study. A total of 232 (42%) respondents answered self--report questionnaires regarding life satisfaction, self-efficacy, sense of coherence, pain distribution and pain intensity at rest and during activity...

  7. The role of precipitation type, intensity, and spatial distribution in source water quality after wildfire

    Science.gov (United States)

    Murphy, Sheila F.; Writer, Jeffrey H.; McCleskey, R. Blaine; Martin, Deborah A.

    2015-01-01

    Storms following wildfires are known to impair drinking water supplies in the southwestern United States, yet our understanding of the role of precipitation in post-wildfire water quality is far from complete. We quantitatively assessed water-quality impacts of different hydrologic events in the Colorado Front Range and found that for a three-year period, substantial hydrologic and geochemical responses downstream of a burned area were primarily driven by convective storms with a 30 min rainfall intensity >10 mm h−1. These storms, which typically occur several times each year in July–September, are often small in area, short-lived, and highly variable in intensity and geographic distribution. Thus, a rain gage network with high temporal resolution and spatial density, together with high-resolution stream sampling, are required to adequately characterize post-wildfire responses. We measured total suspended sediment, dissolved organic carbon (DOC), nitrate, and manganese concentrations that were 10–156 times higher downstream of a burned area compared to upstream during relatively common (50% annual exceedance probability) rainstorms, and water quality was sufficiently impaired to pose water-treatment concerns. Short-term water-quality impairment was driven primarily by increased surface runoff during higher intensity convective storms that caused erosion in the burned area and transport of sediment and chemical constituents to streams. Annual sediment yields downstream of the burned area were controlled by storm events and subsequent remobilization, whereas DOC yields were closely linked to annual runoff and thus were more dependent on interannual variation in spring runoff. Nitrate yields were highest in the third year post-wildfire. Results from this study quantitatively demonstrate that water quality can be altered for several years after wildfire. Because the southwestern US is prone to wildfires and high-intensity rain storms, the role of storms in post

  8. The role of precipitation type, intensity, and spatial distribution in source water quality after wildfire

    Science.gov (United States)

    Murphy, Sheila F.; Writer, Jeffrey H.; Blaine McCleskey, R.; Martin, Deborah A.

    2015-08-01

    Storms following wildfires are known to impair drinking water supplies in the southwestern United States, yet our understanding of the role of precipitation in post-wildfire water quality is far from complete. We quantitatively assessed water-quality impacts of different hydrologic events in the Colorado Front Range and found that for a three-year period, substantial hydrologic and geochemical responses downstream of a burned area were primarily driven by convective storms with a 30 min rainfall intensity >10 mm h-1. These storms, which typically occur several times each year in July-September, are often small in area, short-lived, and highly variable in intensity and geographic distribution. Thus, a rain gage network with high temporal resolution and spatial density, together with high-resolution stream sampling, are required to adequately characterize post-wildfire responses. We measured total suspended sediment, dissolved organic carbon (DOC), nitrate, and manganese concentrations that were 10-156 times higher downstream of a burned area compared to upstream during relatively common (50% annual exceedance probability) rainstorms, and water quality was sufficiently impaired to pose water-treatment concerns. Short-term water-quality impairment was driven primarily by increased surface runoff during higher intensity convective storms that caused erosion in the burned area and transport of sediment and chemical constituents to streams. Annual sediment yields downstream of the burned area were controlled by storm events and subsequent remobilization, whereas DOC yields were closely linked to annual runoff and thus were more dependent on interannual variation in spring runoff. Nitrate yields were highest in the third year post-wildfire. Results from this study quantitatively demonstrate that water quality can be altered for several years after wildfire. Because the southwestern US is prone to wildfires and high-intensity rain storms, the role of storms in post

  9. Eleven-Week Preparation Involving Polarized Intensity Distribution Is Not Superior to Pyramidal Distribution in National Elite Rowers

    Directory of Open Access Journals (Sweden)

    Gunnar Treff

    2017-08-01

    Full Text Available Polarized (POL training intensity distribution (TID emphasizes high-volume low-intensity exercise in zone (Z1 (< first lactate threshold with a greater proportion of high-intensity Z3 (>second lactate threshold compared to Z2 (between first and second lactate threshold. In highly trained rowers there is a lack of prospective controlled evidence whether POL is superior to pyramidal (PYR; i.e., greater volume in Z1 vs. Z2 vs. Z3 TID. The aim of the study was to compare the effect of POL vs. PYR TID in rowers during an 11-wk preparation period. Fourteen national elite male rowers participated (age: 20 ± 2 years, maximal oxygen uptake (V˙O2max: 66 ± 5 mL/min/kg. The sample was split into PYR and POL by varying the percentage spent in Z2 and Z3 while Z1 was clamped to ~93% and matched for total and rowing volume. Actual TIDs were based on time within heart rate zones (Z1 and Z2 and duration of Z3-intervals. The main outcome variables were average power in 2,000 m ergometer-test (P2,000 m, power associated with 4 mmol/L [blood lactate] (P4[BLa], and V˙O2max. To quantify the level of polarization, we calculated a Polarization-Index as log (%Z1 × %Z3 / %Z2. PYR and POL did not significantly differ regarding rowing or total volume, but POL had a higher percentage of Z3 intensities (6 ± 3 vs. 2 ± 1%; p < 0.005 while Z2 was lower (1 ± 1 vs. 3 ± 2%; p < 0.05 and Z1 was similar (94 ± 3 vs. 93 ± 2%, p = 0.37. Consequently, Polarization-Index was significantly higher in POL (3.0 ± 0.7 vs. 1.9 ± 0.4 a.u.; p < 0.01. P2,000 m did not significantly change with PYR (1.5 ± 1.7%, p = 0.06 nor POL (1.5 ± 2.6%, p = 0.26. V˙O2max did not change (1.7 ± 5.6%, p = 0.52 or 0.6 ± 2.6, p = 0.67 and a small increase in P4[BLa] was observed in PYR only (1.9 ± 4.8%, p = 0.37 or −0.5 ± 4.1%, p = 0.77. Changes from pre to post were not significantly different between groups in any performance measure. POL did not prove to be superior to PYR, possibly due to

  10. Eleven-Week Preparation Involving Polarized Intensity Distribution Is Not Superior to Pyramidal Distribution in National Elite Rowers

    Science.gov (United States)

    Treff, Gunnar; Winkert, Kay; Sareban, Mahdi; Steinacker, Jürgen M.; Becker, Martin; Sperlich, Billy

    2017-01-01

    Polarized (POL) training intensity distribution (TID) emphasizes high-volume low-intensity exercise in zone (Z)1 (intensity Z3 (>second lactate threshold) compared to Z2 (between first and second lactate threshold). In highly trained rowers there is a lack of prospective controlled evidence whether POL is superior to pyramidal (PYR; i.e., greater volume in Z1 vs. Z2 vs. Z3) TID. The aim of the study was to compare the effect of POL vs. PYR TID in rowers during an 11-wk preparation period. Fourteen national elite male rowers participated (age: 20 ± 2 years, maximal oxygen uptake (V˙O2max): 66 ± 5 mL/min/kg). The sample was split into PYR and POL by varying the percentage spent in Z2 and Z3 while Z1 was clamped to ~93% and matched for total and rowing volume. Actual TIDs were based on time within heart rate zones (Z1 and Z2) and duration of Z3-intervals. The main outcome variables were average power in 2,000 m ergometer-test (P2,000 m), power associated with 4 mmol/L [blood lactate] (P4[BLa]), and V˙O2max. To quantify the level of polarization, we calculated a Polarization-Index as log (%Z1 × %Z3 / %Z2). PYR and POL did not significantly differ regarding rowing or total volume, but POL had a higher percentage of Z3 intensities (6 ± 3 vs. 2 ± 1%; p < 0.005) while Z2 was lower (1 ± 1 vs. 3 ± 2%; p < 0.05) and Z1 was similar (94 ± 3 vs. 93 ± 2%, p = 0.37). Consequently, Polarization-Index was significantly higher in POL (3.0 ± 0.7 vs. 1.9 ± 0.4 a.u.; p < 0.01). P2,000 m did not significantly change with PYR (1.5 ± 1.7%, p = 0.06) nor POL (1.5 ± 2.6%, p = 0.26). V˙O2max did not change (1.7 ± 5.6%, p = 0.52 or 0.6 ± 2.6, p = 0.67) and a small increase in P4[BLa] was observed in PYR only (1.9 ± 4.8%, p = 0.37 or −0.5 ± 4.1%, p = 0.77). Changes from pre to post were not significantly different between groups in any performance measure. POL did not prove to be superior to PYR, possibly due to the high and very similar percentage of Z1 in this study

  11. The matter-energy intensity distribution in a quantum gravitational system

    CERN Document Server

    ,

    2016-01-01

    In the framework of the method of constraint system quantization, a quantum gravitational system (QGS) with the maximally symmetric geometry is studied. The state vector of the QGS satisfies the set of wave equations which describes the time evolution of a quantum system in the space of quantum fields. It is shown that this state vector can be normalized to unity. The generalization of the wave equations to the domain of negative values of the cosmic scale factor is made. For the arrow of time from past to future, the state vector describes the QGS contracting for the negative values of the scale factor and expanding for its positive values. The intensity distributions of matter are calculated for two exactly solvable models of spatially closed and flat QGSs formed by dust and radiation. The analogies with the motion in time of minimum wave packet for spatially closed QGS and with the phenomenon of diffraction in optics for flat QGS are drawn.

  12. R&D Intensity in the Brazilian Industry: Some Distributional Regularities

    Directory of Open Access Journals (Sweden)

    Marcelo Resende

    2004-01-01

    Full Text Available Previous empirical results on the determinants of R&D intensity have indirectly suggested the relevance of unobserved R&D-related capabilities. Cohen and Klepper (1992 have developed a probabilistic model that is able to conform with well known stylized facts on the R&D intensity distribution such as clustering around zero, unimodality and positive skewness and generates well defined predictions about the correlation between the different distribution moments (mean, variance, coefficient of variation and skewness. The evidence for 3-digits sectors of the manufacturing industry in São Paulo is to a great extent consistent with the referred theoretical model.Resultados empíricos anteriores sobre os determinantes da intensidade em P&D têm sugerido indiretamente a relevância de competências não observadas relacionadas a P&D. Cohen e Klepper (1992 desenvolveram um modelo probabilístico que é capaz de ser consistente com fatos estilizados bem conhecidos acerca da distribuição de P&D tais como agrupamento em torno de zero, unimodalidade e assimetria positiva e gera previsões bem definidas sobre a correlação entre os diferentes momentos da distribuição (média, variância, coeficiente de variação e assimetria. A evidência para setores a 3-dígitos da indústria de transformação em São Paulo é em grande parte consistente com o referido modelo teórico.

  13. Generation of initial kinetic distributions for simulation of long-pulse charged particle beams with high space-charge intensity

    Directory of Open Access Journals (Sweden)

    Steven M. Lund

    2009-11-01

    Full Text Available Self-consistent Vlasov-Poisson simulations of beams with high space-charge intensity often require specification of initial phase-space distributions that reflect properties of a beam that is well adapted to the transport channel—both in terms of low-order rms (envelope properties as well as the higher-order phase-space structure. Here, we first review broad classes of kinetic distributions commonly in use as initial Vlasov distributions in simulations of unbunched or weakly bunched beams with intense space-charge fields including the following: the Kapchinskij-Vladimirskij (KV equilibrium, continuous-focusing equilibria with specific detailed examples, and various nonequilibrium distributions, such as the semi-Gaussian distribution and distributions formed from specified functions of linear-field Courant-Snyder invariants. Important practical details necessary to specify these distributions in terms of standard accelerator inputs are presented in a unified format. Building on this presentation, a new class of approximate initial kinetic distributions are constructed using transformations that preserve linear focusing, single-particle Courant-Snyder invariants to map initial continuous-focusing equilibrium distributions to a form more appropriate for noncontinuous focusing channels. Self-consistent particle-in-cell simulations are employed to show that the approximate initial distributions generated in this manner are better adapted to the focusing channels for beams with high space-charge intensity. This improved capability enables simulations that more precisely probe intrinsic stability properties and machine performance.

  14. Transmission of low-intensity vibration through the axial skeleton of persons with spinal cord injury as a potential intervention for preservation of bone quantity and quality.

    Science.gov (United States)

    Asselin, Pierre; Spungen, Ann M; Muir, Jesse W; Rubin, Clinton T; Bauman, William A

    2011-01-01

    Persons with spinal cord injury (SCI) develop marked bone loss from paralysis and immobilization. Low-intensity vibration (LIV) has shown to be associated with improvement in bone mineral density in post-menopausal women and children with cerebral palsy. We investigated the transmissibility of LIV through the axial skeleton of persons with SCI as an initial approach to determine whether LIV may be used as a clinical modality to preserve skeletal integrity. Transmission of a plantar-based LIV signal (0.27 +/- 0.11 g; 34 Hz) from the feet through the axial skeleton was evaluated as a function of tilt-table angle (15, 30, and 45 degrees) in seven non-ambulatory subjects with SCI and ten able-bodied controls. Three SCI and five control subjects were also tested at 0.44 +/- 0.18 g and 34 Hz. Transmission was measured using accelerometers affixed to a bite-bar to determine the percentage of LIV signal transmitted through the body. The SCI group transmitted 25, 34, and 43% of the LIV signal, and the control group transmitted 28, 45, and 57% to the cranium at tilt angles of 15, 30, and 45 degrees, respectively. No significant differences were noted between groups at any of the three angles of tilt. SCI and control groups demonstrated equivalent transmission of LIV, with greater signal transmission observed at steeper angles of tilt. This work supports the possibility of the utility of LIV as a means to deliver mechanical signals in a form of therapeutic intervention to prevent/reverse skeletal fragility in the SCI population.

  15. Modeling the neutral hydrogen distribution in the post-reionization Universe: intensity mapping

    Science.gov (United States)

    Villaescusa-Navarro, Francisco; Viel, Matteo; Datta, Kanan K.; Choudhury, T. Roy

    2014-09-01

    We model the distribution of neutral hydrogen (HI) in the post-reionization era and investigate its detectability in 21 cm intensity mapping with future radio telescopes like the Square Kilometer array (SKA). We rely on high resolution hydrodynamical N-body simulations that have a state-of-the-art treatment of the low density photoionized gas in the inter-galactic medium (IGM). The HI is assigned a-posteriori to the gas particles following two different approaches: a halo-based method in which HI is assigned only to gas particles residing within dark matter halos; a particle-based method that assigns HI to all gas particles using a prescription based on the physical properties of the particles. The HI statistical properties are then compared to the observational properties of Damped Lyman-α Absorbers (DLAs) and of lower column density systems and reasonable good agreement is found for all the cases. Among the halo-based method, we further consider two different schemes that aim at reproducing the observed properties of DLAs by distributing HI inside halos: one of this results in a much higher bias for DLAs, in agreement with recent observations, which boosts the 21 cm power spectrum by a factor ~ 4 with respect to the other recipe. Furthermore, we quantify the contribution of HI in the diffuse IGM to both ΩHI and the HI power spectrum finding to be subdominant in both cases. We compute the 21 cm power spectrum from the simulated HI distribution and calculate the expected signal for both SKA1-mid and SKA1-low configurations at 2.4 perspective of imaging the HI distribution. Our findings indicate that SKA1-low could detect the most massive HI peaks with a signal to noise ratio (SNR) higher than 5 for an observation time of about 1000 hours at z = 4, for a synthesized beam width of 2'. Detection at redshifts z>=2.4 with SKA1-mid would instead require a much longer observation time to achieve a comparable SNR level.

  16. Space and time analysis of the nanosecond scale discharges in atmospheric pressure air: I. Gas temperature and vibrational distribution function of N2 and O2

    Science.gov (United States)

    Lo, A.; Cessou, A.; Boubert, P.; Vervisch, P.

    2014-03-01

    Reliable experimental data on nanosecond discharge plasmas in air become more and more crucial considering their interest in a wide field of applications. However, the investigations on such nonequilibrium plasmas are made difficult by the spatial non-homogeneities, in particular under atmospheric pressure, the wide range of time scales, and the complexity of multi-physics processes involved therein. In this study, we report spatiotemporal experimental analysis on the gas temperature and the vibrational excitation of N2 and O2 in their ground electronic state during the post-discharge of an overvoltage nanosecond-pulsed discharge generated in a pin-to-plane gap of air at atmospheric pressure. The gas temperature during the pulsed discharge is measured by optical emission spectroscopy related to the rotational bands of the 0-0 vibrational transition N2(C 3 Πu, v = 0) → N2(B3 Πg, v = 0) of nitrogen. The results show a rapid gas heating up to 700 K in tens of nanoseconds after the current rise. This fast gas heating leads to a high gas temperature up to 1000 K measured at 150 ns in the first stages of the post-discharge using spontaneous Raman scattering (SRS). The spatiotemporal measurements of the gas temperature and the vibrational distribution function of N2 and O2, also obtained by SRS, over the post-discharge show the spatial expansion of the high vibrational excitation of N2, and the gas heating during the post-discharge. The present measurements, focused on thermal and energetic aspect of the discharge, provide a base for spatiotemporal analysis of gas number densities of N2, O2 and O atoms and hydrodynamic effects achieved during the post-discharge in part II of this investigation. All these results provide space and time database for the validation of plasma chemical models for nanosecond-pulsed discharges at atmospheric pressure air.

  17. Life satisfaction in subjects with long-term musculoskeletal pain in relation to pain intensity, pain distribution and coping.

    Science.gov (United States)

    Anke, Audny; Damsgård, Elin; Røe, Cecilie

    2013-03-01

    To investigate levels of life satisfaction in subjects with long-term musculoskeletal pain in relation to pain characteristics and coping. Cross-sectional study. A total of 232 (42%) respondents answered self--report questionnaires regarding life satisfaction, self-efficacy, sense of coherence, pain distribution and pain intensity at rest and during activity. Levels of life satisfaction and scores for sense of coherence were low. Pain intensity at rest was negatively correlated with global life satisfaction. This result was also obtained in multiple regression analyses together with the coping factors. The life satisfaction domains activities of daily living/contacts were negatively correlated with pain intensity during activity, and the domains work/economy were negatively correlated with pain distribution. Pain was not associated with satisfaction with family life, partner relationship or sexual life. Younger age, being married/cohabitant and being female were protective for some domains. Clinically meaningful subgroups with regard to adaptation were identified by cluster analysis, and the highest level of coping was found in the adaptive cluster with high life satisfaction/low pain intensity at rest. Long-term pain is related to low levels of life satisfaction, and pain intensity and distribution influence satisfaction in different domains. Pain intensity is negatively associated with coping. The results support efforts to reduce pain, together with strengthening active coping processes and addressing individual needs.

  18. Hypophosphatemia on the intensive care unit: individualized phosphate replacement based on serum levels and distribution volume.

    NARCIS (Netherlands)

    Bech, A.P.; Blans, M.; Raaijmakers, M.H.G.P.; Mulkens, C.; Telting, D.; Boer, H. de

    2013-01-01

    BACKGROUND: Hypophosphatemia occurs in about 25% of patients admitted to the intensive care unit. To date, a safe and validated phosphate replacement protocol is not available. OBJECTIVE: To evaluate an individualized phosphate replacement regimen. DESIGN: Fifty consecutive intensive care unit

  19. Vibration fatigue using modal decomposition

    Science.gov (United States)

    Mršnik, Matjaž; Slavič, Janko; Boltežar, Miha

    2018-01-01

    Vibration-fatigue analysis deals with the material fatigue of flexible structures operating close to natural frequencies. Based on the uniaxial stress response, calculated in the frequency domain, the high-cycle fatigue model using the S-N curve material data and the Palmgren-Miner hypothesis of damage accumulation is applied. The multiaxial criterion is used to obtain the equivalent uniaxial stress response followed by the spectral moment approach to the cycle-amplitude probability density estimation. The vibration-fatigue analysis relates the fatigue analysis in the frequency domain to the structural dynamics. However, once the stress response within a node is obtained, the physical model of the structure dictating that response is discarded and does not propagate through the fatigue-analysis procedure. The structural model can be used to evaluate how specific dynamic properties (e.g., damping, modal shapes) affect the damage intensity. A new approach based on modal decomposition is presented in this research that directly links the fatigue-damage intensity with the dynamic properties of the system. It thus offers a valuable insight into how different modes of vibration contribute to the total damage to the material. A numerical study was performed showing good agreement between results obtained using the newly presented approach with those obtained using the classical method, especially with regards to the distribution of damage intensity and critical point location. The presented approach also offers orders of magnitude faster calculation in comparison with the conventional procedure. Furthermore, it can be applied in a straightforward way to strain experimental modal analysis results, taking advantage of experimentally measured strains.

  20. Quasi-classical trajectories study of Ne2Br2(B) vibrational predissociation: Kinetics and product distributions

    CERN Document Server

    Arbelo-González, Wilmer; Reed, Stewart K; Rubayo-Soneira, Jesús; Shalashilin, Dmitrii V

    2011-01-01

    The vibrational predissociation of the Ne2Br2(B) van der Waals complex has been investigated using the quasi-classical trajectory method (QCT), in the range of vibrational levels v' = 16-23. Extensive comparison is made with the most recent experimental observations [Pio et al., J. Chem. Phys. 133, 014305 (2010)], molecular dynamics with quantum transitions (MDQT) simulations [Miguel et al., Faraday Discuss. 118, 257 (2001)], and preliminary results from 24-dimensional Cartesian coupled coherent state (CCCS) calculations. A sequential mechanism is found to accurately describe the theoretical dynamical evolution of intermediate and final product populations, and both QCT and CCCS provide very good estimates for the dissociation lifetimes. The capabilities of QCT in the description of the fragmentation kinetics is analyzed in detail by using reduced-dimensionality models of the complexes and concepts from phase-space transport theory. The problem of fast decoupling of the different coherent states in CCCS simul...

  1. Research on Electromagnetic Force Distribution and Vibration Performance of A Novel 10/4 Switched Reluctance Motor

    Science.gov (United States)

    Fu, Ziyu; Wang, Xinyu; Cao, Cheng; Liu, Meng; Wang, Kangxi

    2017-06-01

    Radial electromagnetic force is one of the main reasons causing the vibration and noise of the switched reluctance motor. Based on this, the novel structure of 10/4 pole switched reluctance motor is proposed, which increases the air gap flux and electromagnetic torque by increasing the number of stator poles. In addition, the excitation current of the stator winding is reduced by early turn-off angle. Through the finite element modelling analysis, the results show the superiority of the new type of switched reluctance motor. In the end, the vibration characteristics of the conventional motor and the new motor are compared and analysed, and the effect of the structure of this new type of switched reluctance motor is verified.

  2. On the influence of dispersion on the spatial distribution of the intensity of luminescence excited by opposing laser pulses

    Science.gov (United States)

    Martynovich, E. F.; Rudenko, G. V.; Polityko, S. I.

    2009-01-01

    The spatial dynamics of variations in the intensity of the luminescence of quantum systems in crystals of the medium and highest categories of symmetry upon excitation with opposing optical pulses of an arbitrary shape is investigated by numerical simulation methods. It is established that the material dispersion, which is responsible for the dispersion spreading of pulses, has no effect on the shape and width of the envelope of the spatial distribution of the luminescence intensity, as well as on the depth of the luminescence intensity modulation associated with the interference of opposing pulses.

  3. Distribution, prevalence and intensity of Schistosoma bovis infection in cattle in Iringa district, Tanzania.

    Science.gov (United States)

    Makundi, A E; Kassuku, A A; Maselle, R M; Boa, M E

    1998-02-15

    Monthly abattoir, farms and village surveys were carried out to determine the distribution, prevalence and intensity of Schistosoma bovis infection in cattle in Iringa district in the southern highlands of Tanzania between August 1991 to August 1992. Abattoir surveys were conducted at the Iringa regional abattoir and age, sex, live animal grade and livestock market of origin of each of 342 animals examined were recorded. Five grams of the central part of the jejunum were collected from each animal and schistosome egg counting was carried out after tissue digestion. Nine farms and six villages were randomly selected and age, sex and origin of 501 cattle was recorded. Faecal samples were collected from each animal and quantification of schistosome eggs was carried out by means of the Modified Bell filtration technique. Abattoir surveys revealed S. bovis to be present in 116 out of 342 cattle examined in 10 out of the 12 livestock markets surveyed giving a point prevalence of 34%. A high frequency (70.1%) of low tissue egg counts (bovis infection in cattle is very common in foci in Iringa district and possibly the whole of the southern highlands of Tanzania and in some enzootic farms it could be among the major causes of ill-health and lowered productivity.

  4. Local influence of south-east France topography and land cover on the distribution and characteristics of intense rainfall cells

    Science.gov (United States)

    Renard, Florent

    2017-04-01

    The Greater Lyon area is strongly built up, grouping 58 communes and a population of 1.3 million in approximately 500 km2. The flood risk is high as the territory is crossed by two large watercourses and by streams with torrential flow. Floods may also occur in case of runoff after heavy rain or because of a rise in the groundwater level. The whole territory can therefore be affected, and it is necessary to possess in-depth knowledge of the depths, causes and consequences of rainfall to achieve better management of precipitation in urban areas and to reduce flood risk. This study is thus focused on the effects of topography and land cover on the occurrence, intensity and area of intense rainfall cells. They are identified by local radar meteorology (C-band) combined with a processing algorithm running in a geographic information system (GIS) which identified 109,979 weighted mean centres of them in a sample composed of the five most intense rainfall events from 2001 to 2005. First, analysis of spatial distribution at an overall scale is performed, completed by study at a more detailed scale. The results show that the distribution of high-intensity rainfall cells is spread in cluster form. Subsequently, comparison of intense rainfall cells with the topography shows that cell density is closely linked with land slope but that, above all, urbanised zones feature nearly twice as many rainfall cells as farm land or forest, with more intense intensity.

  5. Nonsequential multiple ionization in intense laser pulses: interpretation of ion momentum distributions within the classical 'rescattering' model

    Energy Technology Data Exchange (ETDEWEB)

    Feuerstein, B.; Moshammer, R.; Ullrich, J. [Fakultaet fuer Physik, Universitaet Freiburg, D-79104 Freiburg (Germany)

    2000-11-14

    The classical 'rescattering' model is used to give an interpretation of ion momentum distributions for multiple ionization of atoms in intense fs laser pulses. Kinematical constraints for the ion momenta derived from simple classical considerations reproduce the positions of the maxima observed in experimental momentum distributions of Ne{sup 2+} and Ne{sup 3+} ions. Based on these constraints we present a first prediction on the principle structure of differential ion momentum distributions for multiple ionization. We show that different ionization channels can be characterized by their kinematics, leading to specific ion momentum distributions. A qualitative analysis of the intensity dependence is also given. (author). Letter-to-the-editor.

  6. Distribution of Clinical Isolates at Species Level and Their Antibiotic Susceptibilities in Intensive Care Units Patients

    Directory of Open Access Journals (Sweden)

    Ayşe Barış

    2017-04-01

    Full Text Available Objective: Intensive care units are a hospital’s section where hospital infections and resistant microorganisms are most commonly seen. In this study it was aimed to determine the microorganisms which were isolated from various clinical specimens of the patients in intensive care units for a year and antibiotic susceptibility of the microorganisms. Materials and Methods: MALDI TOF MS and BD Phoenix system were used for the identification of bacteria, antibiotic sensitivities were evaluated by Kirby-Bauer disk diffusion method and BD Phoenix system in accordance with the Clinical and Laboratory Standards Institute recommendations. Results: In this study, a total of 1163 microorganisms were obtained; 575 (49.4% gram-negative bacteria (GNB, 556 (47.8% gram-positive bacteria (GPB and 32 Candida spp. (2.7%. Strains were produced from blood (488, urine (233, respiratory tract (224, sterile body fluid (88, wounds (68 and catheter samples (62. The most frequently isolated GNBs were found to be Acinetobacter baumannii 131 (11.2%, Klebsiella pneumoniae 109 (9.3%, Escherichia coli 91 (7.8% in order of frequency. Extended-spectrum beta-lactamase production was observed in 16 E. coli, 29 Klebsiella spp. Carbapenem resistance was identified in 132 Acinetobacter spp., 27 Pseudomonas spp., 14 K. pneumoniae, 1 E. coli. For Pseudomonas strains, ciprofloxacin and amikacin; for Acinetobacter strains, amikacin and colistin; for Escherichia and Klebsiella strains, amikacin and imipenem were determined as the most effective antibiotics. The most frequently isolated GPBs were 351 (30% coagulase-negative staphylococci (CNS (192 S. epidermidis, 111 (9.5% Enterococcus spp. (67 Enterococcus faecalis, 55 Staphylococcus aureus, respectively. While Methicillin resistance was determined in 7 S. aureus and 191 CNS; vancomycin resistance was detected in 3 Enterococcus faecium strains. The most effective antibiotics against S. aureus and Enterococcus spp. strains were

  7. Resonator with a back deformable mirror for the formation of a beam with a given intensity distribution

    Science.gov (United States)

    Kiyko, V. V.; Kislov, V. I.; Ofitserov, Evgenii N.

    2011-10-01

    We present the results of a numerical-analytical study of formation of an output beam with a given intensity distribution for a resonator with a back deformable mirror (DM) and semitransparent spherical front mirror. Using the theory of inverse optical problems in the diffraction approximation, the basic characteristics of a laser resonator with a DM are considered as functions of the reference resonator configuration and the form of the distribution function, describing the given intensity. The laser beam formation in the reference resonator with plane-parallel and concentric configurations is compared. In the investigated resonators, the given intensity distribution is a fundamental mode; the selectivity (determined by the power losses of transverse modes) of the resonator with a DM is comparable with that of the reference resonator. It is shown that the formation of the given intensity distributions (uniform, super-Gaussian, or having several maxima) requires a DM with the amplitude of deformations of the optical surface of the order of λ and the number of control channels from 1 to nearly 10.

  8. Rapid post-earthquake modelling of coseismic landslide intensity and distribution for emergency response decision support

    Directory of Open Access Journals (Sweden)

    T. R. Robinson

    2017-09-01

    Full Text Available Current methods to identify coseismic landslides immediately after an earthquake using optical imagery are too slow to effectively inform emergency response activities. Issues with cloud cover, data collection and processing, and manual landslide identification mean even the most rapid mapping exercises are often incomplete when the emergency response ends. In this study, we demonstrate how traditional empirical methods for modelling the total distribution and relative intensity (in terms of point density of coseismic landsliding can be successfully undertaken in the hours and days immediately after an earthquake, allowing the results to effectively inform stakeholders during the response. The method uses fuzzy logic in a GIS (Geographic Information Systems to quickly assess and identify the location-specific relationships between predisposing factors and landslide occurrence during the earthquake, based on small initial samples of identified landslides. We show that this approach can accurately model both the spatial pattern and the number density of landsliding from the event based on just several hundred mapped landslides, provided they have sufficiently wide spatial coverage, improving upon previous methods. This suggests that systematic high-fidelity mapping of landslides following an earthquake is not necessary for informing rapid modelling attempts. Instead, mapping should focus on rapid sampling from the entire affected area to generate results that can inform the modelling. This method is therefore suited to conditions in which imagery is affected by partial cloud cover or in which the total number of landslides is so large that mapping requires significant time to complete. The method therefore has the potential to provide a quick assessment of landslide hazard after an earthquake and may therefore inform emergency operations more effectively compared to current practice.

  9. Rapid post-earthquake modelling of coseismic landslide intensity and distribution for emergency response decision support

    Science.gov (United States)

    Robinson, Tom R.; Rosser, Nicholas J.; Densmore, Alexander L.; Williams, Jack G.; Kincey, Mark E.; Benjamin, Jessica; Bell, Heather J. A.

    2017-09-01

    Current methods to identify coseismic landslides immediately after an earthquake using optical imagery are too slow to effectively inform emergency response activities. Issues with cloud cover, data collection and processing, and manual landslide identification mean even the most rapid mapping exercises are often incomplete when the emergency response ends. In this study, we demonstrate how traditional empirical methods for modelling the total distribution and relative intensity (in terms of point density) of coseismic landsliding can be successfully undertaken in the hours and days immediately after an earthquake, allowing the results to effectively inform stakeholders during the response. The method uses fuzzy logic in a GIS (Geographic Information Systems) to quickly assess and identify the location-specific relationships between predisposing factors and landslide occurrence during the earthquake, based on small initial samples of identified landslides. We show that this approach can accurately model both the spatial pattern and the number density of landsliding from the event based on just several hundred mapped landslides, provided they have sufficiently wide spatial coverage, improving upon previous methods. This suggests that systematic high-fidelity mapping of landslides following an earthquake is not necessary for informing rapid modelling attempts. Instead, mapping should focus on rapid sampling from the entire affected area to generate results that can inform the modelling. This method is therefore suited to conditions in which imagery is affected by partial cloud cover or in which the total number of landslides is so large that mapping requires significant time to complete. The method therefore has the potential to provide a quick assessment of landslide hazard after an earthquake and may therefore inform emergency operations more effectively compared to current practice.

  10. VIBRATION ISOLATION SYSTEM PROBABILITY ANALYSIS

    Directory of Open Access Journals (Sweden)

    Smirnov Vladimir Alexandrovich

    2012-10-01

    Full Text Available The article deals with the probability analysis for a vibration isolation system of high-precision equipment, which is extremely sensitive to low-frequency oscillations even of submicron amplitude. The external sources of low-frequency vibrations may include the natural city background or internal low-frequency sources inside buildings (pedestrian activity, HVAC. Taking Gauss distribution into account, the author estimates the probability of the relative displacement of the isolated mass being still lower than the vibration criteria. This problem is being solved in the three dimensional space, evolved by the system parameters, including damping and natural frequency. According to this probability distribution, the chance of exceeding the vibration criteria for a vibration isolation system is evaluated. Optimal system parameters - damping and natural frequency - are being developed, thus the possibility of exceeding vibration criteria VC-E and VC-D is assumed to be less than 0.04.

  11. Sociospatial distribution of access to facilities for moderate and vigorous intensity physical activity in Scotland by different modes of transport

    Directory of Open Access Journals (Sweden)

    Lamb Karen E

    2012-07-01

    Full Text Available Abstract Background People living in neighbourhoods of lower socioeconomic status have been shown to have higher rates of obesity and a lower likelihood of meeting physical activity recommendations than their more affluent counterparts. This study examines the sociospatial distribution of access to facilities for moderate or vigorous intensity physical activity in Scotland and whether such access differs by the mode of transport available and by Urban Rural Classification. Methods A database of all fixed physical activity facilities was obtained from the national agency for sport in Scotland. Facilities were categorised into light, moderate and vigorous intensity activity groupings before being mapped. Transport networks were created to assess the number of each type of facility accessible from the population weighted centroid of each small area in Scotland on foot, by bicycle, by car and by bus. Multilevel modelling was used to investigate the distribution of the number of accessible facilities by small area deprivation within urban, small town and rural areas separately, adjusting for population size and local authority. Results Prior to adjustment for Urban Rural Classification and local authority, the median number of accessible facilities for moderate or vigorous intensity activity increased with increasing deprivation from the most affluent or second most affluent quintile to the most deprived for all modes of transport. However, after adjustment, the modelling results suggest that those in more affluent areas have significantly higher access to moderate and vigorous intensity facilities by car than those living in more deprived areas. Conclusions The sociospatial distributions of access to facilities for both moderate intensity and vigorous intensity physical activity were similar. However, the results suggest that those living in the most affluent neighbourhoods have poorer access to facilities of either type that can be reached on foot

  12. A Scheduling Algorithm for the Distributed Student Registration System in Transaction-Intensive Environment

    Science.gov (United States)

    Li, Wenhao

    2011-01-01

    Distributed workflow technology has been widely used in modern education and e-business systems. Distributed web applications have shown cross-domain and cooperative characteristics to meet the need of current distributed workflow applications. In this paper, the author proposes a dynamic and adaptive scheduling algorithm PCSA (Pre-Calculated…

  13. Generalized Kapchinskij-Vladimirskij distribution and envelope equation for high-intensity beams in a coupled transverse focusing lattice.

    Science.gov (United States)

    Qin, Hong; Chung, Moses; Davidson, Ronald C

    2009-11-27

    In an uncoupled lattice, the Kapchinskij-Vladimirskij (KV) distribution function first analyzed in 1959 is the only known exact solution of the nonlinear Vlasov-Maxwell equations for high-intensity beams including self-fields in a self-consistent manner. The KV solution is generalized here to high-intensity beams in a coupled transverse lattice using the recently developed generalized Courant-Snyder invariant for coupled transverse dynamics. This solution projects to a rotating, pulsating elliptical beam in transverse configuration space, determined by the generalized matrix envelope equation.

  14. Numerical Extraction of Distributions of Space-charge and Polarization from Laser Intensity Modulation Method

    OpenAIRE

    Tuncer, Enis; Lang, Sidney B.

    2004-01-01

    The Fredholm integral equation of the laser intensity modulation method is solved with the application of the Monte Carlo technique and a least-squares solver. The numerical procedure is tested on simulated data.

  15. Quantum-mechanical calculation of the intensity distribution in Raman and resonance Raman spectra of a phenylalanine aqueous solution

    Science.gov (United States)

    Burova, T. G.; Shcherbakov, R. S.

    2017-03-01

    Quantum-mechanical calculations of the intensity distribution in the resonance Raman spectrum of an aqueous solution of phenylalanine, excited by light with wavelengths of 193, 204, 218, and 235 nm, and in the nonresonant Raman spectrum excited at a wavelength of 488 nm have been performed. The calculation results are in satisfactory agreement with the experimental data in the literature. Spectral lines characteristic of phenylalanine are observed, which can be used as markers when analyzing the peptide structure. It is noted that the contribution of highly excited electronic states (spaced by less than 10 eV from the resonant lines) to the scattering tensor components must be taken into account. The important role of the Herzberg-Teller effect in the description of spectral intensity distribution is demonstrated.

  16. S-matrix theory of two-electron momentum distribution produced by double ionization in intense laser fields.

    Science.gov (United States)

    Becker, A; Faisal, F

    2001-03-26

    Recently observed momentum distribution of doubly charged recoil-ions of atoms produced by femtosecond infrared laser pulses is analyzed using the so-called intense-field many-body S-matrix theory. Observed characteristics of the momentum distributions, parallel and perpendicular to the polarization axis, are reproduced by the theory. It is shown that correlated energy-sharing between the two electrons in the intermediate state and their 'Volkov-dressing' in the final state, can explain the origin of these characteristics.

  17. Numerical simulations of the hard X-ray pulse intensity distribution at the Linac Coherent Light Source.

    Science.gov (United States)

    Pardini, Tom; Aquila, Andrew; Boutet, Sébastien; Cocco, Daniele; Hau-Riege, Stefan P

    2017-07-01

    Numerical simulations of the current and future pulse intensity distributions at selected locations along the Far Experimental Hall, the hard X-ray section of the Linac Coherent Light Source (LCLS), are provided. Estimates are given for the pulse fluence, energy and size in and out of focus, taking into account effects due to the experimentally measured divergence of the X-ray beam, and measured figure errors of all X-ray optics in the beam path. Out-of-focus results are validated by comparison with experimental data. Previous work is expanded on, providing quantitatively correct predictions of the pulse intensity distribution. Numerical estimates in focus are particularly important given that the latter cannot be measured with direct imaging techniques due to detector damage. Finally, novel numerical estimates of improvements to the pulse intensity distribution expected as part of the on-going upgrade of the LCLS X-ray transport system are provided. We suggest how the new generation of X-ray optics to be installed would outperform the old one, satisfying the tight requirements imposed by X-ray free-electron laser facilities.

  18. The footprint of bottom trawling in European waters: distribution, intensity, and seabed integrity

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Bastardie, Francois; Hinzen, N.T.

    2017-01-01

    Mapping trawling pressure on the benthic habitats is needed as background to support an ecosystem approach to fisheries management. The extent and intensity of bottom trawling on the European continental shelf (0-1000 m) was analysed from logbook statistics and vessel monitoring system data for 2...

  19. Intensity and degree of segregation in bimodal and multimodal grain size distributions

    Science.gov (United States)

    Katra, Itzhak; Yizhaq, Hezi

    2017-08-01

    The commonly used grain size analysis technique which applies moments (sorting, skewness and kurtosis) is less useful in the case of sediments with bimodal size distributions. Herein we suggest a new simple method for analyzing the degree of grain size segregation in sand-sized sediment that has clear bimodal size distributions. Two main features are used to characterize the bimodal distribution: grain diameter segregation, which is the normalized difference between coarse and fine grain diameters, and the frequency segregation which is the normalized difference in frequencies between two modes. The new defined indices can be calculated from frequency plot curves and can be graphically represented on a two dimensional coordinate system showing the dynamical aspects of the size distribution. The results enable comparison between granular samples from different locations and/or times to shed new light on the dynamic processes involved in grain size segregation of sediments. We demonstrate here the use of this method to analyze bimodal distributions of aeolian granular samples mostly from aeolian megaripples. Six different aeolian cases were analyzed to highlight the method's applicability, which is relevant to wide research themes in the Earth and environmental sciences, and can furthermore be easily adapted to analyze polymodal grain size distributions.

  20. Initial assessment of the intensity distribution of the 2011 Mw5.8 Mineral, Virginia, earthquake

    Science.gov (United States)

    Hough, Susan E.

    2012-01-01

    The intensity data collected by the U.S. Geological Survey (USGS) "Did You Feel It?" (DYFI) Website (USGS, DYFI; http://earthquake.usgs.gov/earthquakes/dyfi/events/se/082311a/us/index.html, last accessed Sept 2011) for the Mw5.8 Mineral, Virginia, earthquake, are unprecedented in their spatial richness and geographical extent. More than 133,000 responses were received during the first week following the earthquake. Although intensity data have traditionally been regarded as imprecise and generally suspect (e.g., Hough 2000), there is a growing appreciation for the potential utility of spatially rich, systematically determined DYFI data to address key questions in earthquake ground-motions science (Atkinson and Wald, 2007; Hauksson et al., 2008).

  1. Monitoring vibrations

    Energy Technology Data Exchange (ETDEWEB)

    Tiryaki, B. [Hacettepe University (Turkey). Dept. of Mining Engineering

    2003-12-01

    The paper examines the prediction and optimisation of machine vibrations in longwall shearers. Underground studies were carried out at the Middle Anatolian Lignite Mine, between 1993 and 1997. Several shearer drums with different pick lacing arrangements were designed and tested on double-ended ranging longwall shearers employed at the mine. A computer program called the Vibration Analysis Program (VAP) was developed for analysing machine vibrations in longwall shearers. Shearer drums that were tested underground, as well as some provided by leading manufacturers, were analyzed using these programs. The results of the experiments and computer analyses are given in the article. 4 refs., 9 figs.

  2. A Novel Fault Diagnosis Model for Bearing of Railway Vehicles Using Vibration Signals Based on Symmetric Alpha-Stable Distribution Feature Extraction

    Directory of Open Access Journals (Sweden)

    Yongjian Li

    2016-01-01

    Full Text Available Axle box bearings are the most critical mechanical components of railway vehicles. Condition monitoring is of great benefit to ensure the healthy status of bearings in the railway train. In this paper, a novel fault diagnosis model for axle box bearing based on symmetric alpha-stable distribution feature extraction and least squares support vector machines (LS-SVM using vibration signals is proposed which is conducted in three main steps. Firstly, fast nonlocal means is used for denoising and ensemble empirical mode decomposition is applied to extract fault feature information. Then a new statistical method of feature extraction, symmetric alpha-stable distribution, is employed to obtain representative features from intrinsic mode functions. Additionally, the hybrid fault feature sets are input into LS-SVM to identify the fault type. To enhance the performance of LS-SVM in the case of small-scale samples, Morlet wavelet kernel function is combined with LS-SVM for the classification of fault type and fault severity and the particle swarm optimization is used for the optimization of LS-WSVM parameters. Finally, the experimental results demonstrate that the proposed approach performs more effectively and robustly than the other methods in small-scale samples for fault detection and classification of railway vehicle bearings.

  3. Uniform areal-distribution of UV intensity by synchronizing signal-waveforms and position of a UV-LED array

    Science.gov (United States)

    Takahashi, H.; Shimoyama, I.; Heo, Y. J.

    2017-12-01

    This paper describes a theoretical approach to give an irradiated area a uniform distribution of LED light intensity by synchronizing the signal waveforms and position control of the LEDs. Although UV-LEDs have attracted considerable attention as alternative light sources for ultraviolet (UV) lithography in Micro Electro Mechanical Systems (MEMS) fabrication, mainly because of their low cost and low power consumption, the realization of a uniform UV intensity over an area remains challenging. Here, we propose a method to achieve a uniform areal intensity within an irradiated area by synchronizing the signal waveform and position of a UV-LED array. To verify our theoretical calculation, we developed a system with a UV-LED array whose position is controlled by a linear actuator. The intensity of the UV-LED array is controlled by a pulse width modulation (PWM) signal, which is synchronized with the position of the linear actuator. Using this system, we fabricated 2D micropatterns and 3D microstructures with high uniformity in the irradiated area. The proposed method is expected to facilitate practical LED-based lithography in MEMS fabrication.

  4. Bloodstream infections in intensive care unit patients: distribution and antibiotic resistance of bacteria

    Directory of Open Access Journals (Sweden)

    Russotto V

    2015-08-01

    Full Text Available Vincenzo Russotto,1 Andrea Cortegiani,1 Giorgio Graziano,2 Laura Saporito,2 Santi Maurizio Raineri,1 Caterina Mammina,2 Antonino Giarratano1 1Department of Biopathology and Medical Biotechnologies (DIBIMED, Section of Anaesthesia, Analgesia, Intensive Care and Emergency, Paolo Giaccone University Hospital, University of Palermo, Palermo, Italy; 2Department of Sciences for Health Promotion and Mother-Child Care, University of Palermo, Palermo, Italy Abstract: Bloodstream infections (BSIs are among the leading infections in critically ill patients. The case-fatality rate associated with BSIs in patients admitted to intensive care units (ICUs reaches 35%–50%. The emergence and diffusion of bacteria with resistance to antibiotics is a global health problem. Multidrug-resistant bacteria were detected in 50.7% of patients with BSIs in a recently published international observational study, with methicillin resistance detected in 48% of Staphylococcus aureus strains, carbapenem resistance detected in 69% of Acinetobacter spp., in 38% of Klebsiella pneumoniae, and in 37% of Pseudomonas spp. Prior hospitalization and antibiotic exposure have been identified as risk factors for infections caused by resistant bacteria in different studies. Patients with BSIs caused by resistant strains showed an increased risk of mortality, which may be explained by a higher incidence of inappropriate empirical therapy in different studies. The molecular genetic characterization of resistant bacteria allows the understanding of the most common mechanisms underlying their resistance and the adoption of surveillance measures. Knowledge of epidemiology, risk factors, mechanisms of resistance, and outcomes of BSIs caused by resistant bacteria may have a major influence on global management of ICU patients. The aim of this review is to provide the clinician an update on BSIs caused by resistant bacteria in ICU patients. Keywords: bloodstream infections, multidrug resistant

  5. Momentum distributions of selected rare-gas atoms probed by intense femtosecond laser pulses

    DEFF Research Database (Denmark)

    Abu-Samha, Mahmoud; Madsen, Lars Bojer

    2011-01-01

    . The calculations are performed by solving the time-dependent Schrödinger equation within the single-active-electron approximation, and focal-volume effects are taken into account by appropriately averaging the results. The resulting momentum distributions are in quantitative agreement with the experimental...

  6. Phase shift cavity ring down and Fourier transform infrared measurements of C-H vibrational transitions, energy levels, and intensities of (CH3)3Si-C≡C-H

    Science.gov (United States)

    Barroso, Jenny Z.; Perez-Delgado, Yasnahir; Manzanares, Carlos E.

    2013-07-01

    Phase shift cavity ring down and Fourier transform IR techniques have been used to observe the C-H stretch fundamental and overtone absorptions of the acetylenic (Δυ = 1-5) and methyl (Δυ = 1-6) C-H bonds of trimethyl-silyl-acetylene [(CH3)3CSi≡CH] at 295 K. Harmonic frequencies ω(ν1), ωa, and ωs and anharmonicities x(ν1), ωaxa, ωsxs were calculated for the acetylenic, methyl out-of-plane, and methyl in-plane C-H bonds, respectively. The harmonically coupled anharmonic oscillator (HCAO) model was used to determine the overtone energy levels and assign the absorption bands to vibrational transitions of methyl C-H bonds. A hot band, assigned as υν1 + ν24 - ν24 is observed for transitions with Δυ = 1-5 in a region near the acetylenic stretch. The intensity of the hot band is reduced considerably at 240 K. The strength of a Fermi resonance between C-Ha transition (υνa) and the combination band ((υ-1)νa + 2νbend) with (υ = 3-6) was calculated using the experimental perturbed energies and relative intensities. The main bands are separated by computer deconvolution and are integrated at each level to get the experimental band strengths. For methyl absorptions, the dipole moment function is expanded as a function of two C-H stretching coordinates and the intensities are calculated in terms of the HCAO model where only the C-H modes are considered. Acetylenic intensities are derived with a one dimensional dipole moment function. The expansion coefficients are obtained from molecular orbital calculations. The intensities are calculated without using adjustable parameters and they are of the same order of magnitude of the experimental intensities for all C-H transitions.

  7. The Macroseismic Intensity Distribution of the 30 October 2016 Earthquake in Central Italy (Mw 6.6): Seismotectonic Implications

    Science.gov (United States)

    Galli, Paolo; Castenetto, Sergio; Peronace, Edoardo

    2017-10-01

    The central Italy Apennines were rocket in 2016 by the strongest earthquakes of the past 35 years. Two main shocks (Mw 6.2 and Mw 6.6) between the end of August and October caused the death of almost 300 people, and the destruction of 50 villages and small towns scattered along 40 km in the hanging wall of the N165° striking Mount Vettore fault system, that is, the structure responsible for the earthquakes. The 24 August southern earthquake, besides causing all the casualties, razed to the ground the small medieval town of Amatrice and dozens of hamlets around it. The 30 October main shock crushed definitely all the villages of the whole epicentral area (up to 11 intensity degree), extending northward the level of destruction and inducing heavy damage even to the 30 km far Camerino town. The survey of the macroseismic effects started the same day of the first main shock and continued during the whole seismic sequence, even during and after the strong earthquakes at the end of October, allowing the definition of a detailed picture of the damage distribution, day by day. Here we present the results of the final survey in terms of Mercalli-Cancani-Sieberg intensity, which account for the cumulative effects of the whole 2016 sequence (465 intensity data points, besides 435 related to the 24 August and 54 to the 26 October events, respectively). The distribution of the highest intensity data points evidenced the lack of any possible overlap between the 2016 earthquakes and the strongest earthquakes of the region, making this sequence a unique case in the seismic history of Italy. In turn, the cross matching with published paleoseismic data provided some interesting insights concerning the seismogenic behavior of the Mount Vettore fault in comparison with other active normal faults of the region.

  8. Tissue vibration in prolonged running.

    Science.gov (United States)

    Friesenbichler, Bernd; Stirling, Lisa M; Federolf, Peter; Nigg, Benno M

    2011-01-04

    The impact force in heel-toe running initiates vibrations of soft-tissue compartments of the leg that are heavily dampened by muscle activity. This study investigated if the damping and frequency of these soft-tissue vibrations are affected by fatigue, which was categorized by the time into an exhaustive exercise. The hypotheses were tested that (H1) the vibration intensity of the triceps surae increases with increasing fatigue and (H2) the vibration frequency of the triceps surae decreases with increasing fatigue. Tissue vibrations of the triceps surae were measured with tri-axial accelerometers in 10 subjects during a run towards exhaustion. The frequency content was quantified with power spectra and wavelet analysis. Maxima of local vibration intensities were compared between the non-fatigued and fatigued states of all subjects. In axial (i.e. parallel to the tibia) and medio-lateral direction, most local maxima increased with fatigue (supporting the first hypothesis). In anterior-posterior direction no systematic changes were found. Vibration frequency was minimally affected by fatigue and frequency changes did not occur systematically, which requires the rejection of the second hypothesis. Relative to heel-strike, the maximum vibration intensity occurred significantly later in the fatigued condition in all three directions. With fatigue, the soft tissue of the triceps surae oscillated for an extended duration at increased vibration magnitudes, possibly due to the effects of fatigue on type II muscle fibers. Thus, the protective mechanism of muscle tuning seems to be reduced in a fatigued muscle and the risk of potential harm to the tissue may increase. Copyright © 2010 Elsevier Ltd. All rights reserved.

  9. A methodology to study multiple sclerosis (MS) based on distributions of standardized intensities in segmented tissue regions

    Science.gov (United States)

    Lei, T.; Udupa, J. K.; Odhner, D.; Mishra, S.; Wu, G.; Schwartz, E.; Ying, G.-S.; Iwanaga, T.; Desiderio, L.; Balcer, L.

    2006-03-01

    This paper presents (1) an improved hierarchical method for segmenting the component tissue regions in fast spin echo T2 and PD images of the brain of Multiple Sclerosis (MS) patients, and (2) a methodology to characterize the disease utilizing the distributions of standardized T2 and PD intensities in the segmented tissue regions. First, the background intensity inhomogeneities are corrected and the intensity scales are standardized for all acquired images. The segmentation method imposes a feedback-like procedure on our previously developed hierarchical brain tissue segmentation method. With gradually simplified patterns in images and stronger evidences, pathological objects are recognized and segmented in an interplay fashion. After the brain parenchymal (BP) mask is generated, an under-estimated gray matter mask (uGM) and an over-estimated white matter mask (oWM) are created. Pure WM (PWM) and lesion (LS) masks are extracted from the all-inclusive oWM mask. By feedback, accurate GM and WM masks are subsequently formed. Finally, partial volume regions of GM and WM as well as Dirty WM (DWM) masks are generated. Intensity histograms and their parameters (peak height, peak location, and 25th, 50th and 75th percentile values) are computed for both T2 and PD images within each tissue region. Tissue volumes are also estimated. Spearman correlation coefficient rank test is then utilized to assess if there exists a trend between clinical states and the image-based parameters. This image analysis method has been applied to a data set consisting of 60 patients with MS and 20 normal controls. LS related parameters and clinical Extended Disability Status Scale (EDSS) scores demonstrate modest correlations. Almost every intensity-based parameter shows statistical difference between normal control and patient groups with a level better than 5%. These results can be utilized to monitor disease progression in MS.

  10. Quantum-Phase Resolved Mapping of Ground-State Vibrational D2 Wave Packets via Selective Depletion in Intense Laser Pulses

    Science.gov (United States)

    Ergler, Th.; Feuerstein, B.; Rudenko, A.; Zrost, K.; Schröter, C. D.; Moshammer, R.; Ullrich, J.

    2006-09-01

    Applying 7 fs pump-probe pulses (780nm, 4×1014W/cm2) we observe electronic ground-state vibrational wave packets in neutral D2 with a period of T=11.101(70)fs by following the internuclear separation (R-)dependent ionization with a sensitivity of Δ⟨R⟩≤0.02Å. The absolute phase of the wave packet’s motion provides evidence for R-dependent depletion of the ground state by nonlinear ionization, to be the dominant preparation mechanism. A phase shift of about π found between pure ionization (D2+) and dissociation (D++D) channels opens a pathway of quantum control.

  11. Anharmonic Calculation of the Structure, Vibrational Frequencies, and Intensities of the NH3···cis-HONO and NH3···cis-DONO Complexes.

    Science.gov (United States)

    Bulychev, V P; Buturlimova, M V; Tokhadze, K G

    2016-08-25

    The geometrical parameters, the frequencies, and absolute intensities for transitions between vibrational states of NH3···cis-HONO and NH3···cis-DONO hydrogen-bonded complexes are calculated using the approach earlier tested in calculations of isolated molecules of nitrous acid and the NH3···trans-HONO and NH3··trans-DONO complexes. Vibrational wave functions and energy values of the complexes are derived from variational solutions of anharmonic equations in one to four dimensions. The equilibrium nuclear configuration and potential energy surfaces are calculated by the MP2/aug-cc-pVTZ method with the basis set superposition error taken into account. Comparison of the obtained results with the analogous data calculated in the same approximation for isolated cis- and trans-HONO (DONO) molecules and the NH3···trans-HONO (DONO) complexes provides information about the changes in the spectroscopic and geometrical parameters of nitrous acid upon cis-trans transition, H/D substitution, and H-bond formation.

  12. High-Intensity Radiated Field Fault-Injection Experiment for a Fault-Tolerant Distributed Communication System

    Science.gov (United States)

    Yates, Amy M.; Torres-Pomales, Wilfredo; Malekpour, Mahyar R.; Gonzalez, Oscar R.; Gray, W. Steven

    2010-01-01

    Safety-critical distributed flight control systems require robustness in the presence of faults. In general, these systems consist of a number of input/output (I/O) and computation nodes interacting through a fault-tolerant data communication system. The communication system transfers sensor data and control commands and can handle most faults under typical operating conditions. However, the performance of the closed-loop system can be adversely affected as a result of operating in harsh environments. In particular, High-Intensity Radiated Field (HIRF) environments have the potential to cause random fault manifestations in individual avionic components and to generate simultaneous system-wide communication faults that overwhelm existing fault management mechanisms. This paper presents the design of an experiment conducted at the NASA Langley Research Center's HIRF Laboratory to statistically characterize the faults that a HIRF environment can trigger on a single node of a distributed flight control system.

  13. Demand Response Programs Design and Use Considering Intensive Penetration of Distributed Generation

    Directory of Open Access Journals (Sweden)

    Pedro Faria

    2015-06-01

    Full Text Available Further improvements in demand response programs implementation are needed in order to take full advantage of this resource, namely for the participation in energy and reserve market products, requiring adequate aggregation and remuneration of small size resources. The present paper focuses on SPIDER, a demand response simulation that has been improved in order to simulate demand response, including realistic power system simulation. For illustration of the simulator’s capabilities, the present paper is proposes a methodology focusing on the aggregation of consumers and generators, providing adequate tolls for the demand response program’s adoption by evolved players. The methodology proposed in the present paper focuses on a Virtual Power Player that manages and aggregates the available demand response and distributed generation resources in order to satisfy the required electrical energy demand and reserve. The aggregation of resources is addressed by the use of clustering algorithms, and operation costs for the VPP are minimized. The presented case study is based on a set of 32 consumers and 66 distributed generation units, running on 180 distinct operation scenarios.

  14. Numerical simulation of high intensity focused ultrasound temperature distribution for transcranial brain therapy

    Science.gov (United States)

    Zhang, Qian; Wang, Yizhe; Zhou, Wenzheng; Zhang, Ji; Jian, Xiqi

    2017-03-01

    To provide a reference for the HIFU clinical therapeutic planning, the temperature distribution and lesion volume are analyzed by the numerical simulation. The adopted numerical simulation is based on a transcranial ultrasound therapy model, including an 8 annular-element curved phased array transducer. The acoustic pressure and temperature elevation are calculated by using the approximation of Westervelt Formula and the Pennes Heat Transfer Equation. In addition, the Time Reversal theory and eliminating hot spot technique are combined to optimize the temperature distribution. With different input powers and exposure times, the lesion volume is evaluated based on temperature threshold theory. The lesion region could be restored at the expected location by the time reversal theory. Although the lesion volume reduces after eliminating the peak temperature in the skull and more input power and exposure time is required, the injury of normal tissue around skull could be reduced during the HIFU therapy. The prediction of thermal deposition in the skull and the lesion region could provide a reference for clinical therapeutic dose.

  15. Intensity distributions of reflected surface channeling protons scattered on surfaces of electron-bombarded alkali halide crystals

    Science.gov (United States)

    Fukazawa, Y.; Kihara, K.; Iwamoto, K.; Susuki, Y.

    2013-11-01

    We have examined the surface-channeling of 550 keV protons on electron-bombarded KBr(0 0 1) surfaces at grazing incidence. On the surface, electron-stimulated desorption (ESD) resulting from the irradiation of 5 keV electrons changes the surface morphology. In order to investigate the change of the surface morphology, the luminous intensity distributions observed on a fluorescent screen (scattering patterns) of the reflected protons under the surface-channeling conditions are measured. Normalized specular intensity of the protons oscillates, and the results of computer simulations show that the period of the intensity oscillation agrees with the period of layer-by-layer desorption. The measured period of the oscillation is comparable to the simulated one, i.e., the period of the desorption, however, the measured amplitude of the oscillation is weak. This shows that the layer-by-layer desorption of the experimental surface is observed but is not as remarkable as that of the perfect surface introduced in the simulation.

  16. Intensity distributions of reflected surface channeling protons scattered on surfaces of electron-bombarded alkali halide crystals

    Energy Technology Data Exchange (ETDEWEB)

    Fukazawa, Y., E-mail: yukofu@cc.osaka-kyoiku.ac.jp; Kihara, K.; Iwamoto, K.; Susuki, Y.

    2013-11-15

    We have examined the surface-channeling of 550 keV protons on electron-bombarded KBr(0 0 1) surfaces at grazing incidence. On the surface, electron-stimulated desorption (ESD) resulting from the irradiation of 5 keV electrons changes the surface morphology. In order to investigate the change of the surface morphology, the luminous intensity distributions observed on a fluorescent screen (scattering patterns) of the reflected protons under the surface-channeling conditions are measured. Normalized specular intensity of the protons oscillates, and the results of computer simulations show that the period of the intensity oscillation agrees with the period of layer-by-layer desorption. The measured period of the oscillation is comparable to the simulated one, i.e., the period of the desorption, however, the measured amplitude of the oscillation is weak. This shows that the layer-by-layer desorption of the experimental surface is observed but is not as remarkable as that of the perfect surface introduced in the simulation.

  17. Training Intensity Distribution Over a Four-Year Cycle in Olympic Champion Rowers: Different Roads Lead to Rio.

    Science.gov (United States)

    Plews, Daniel J; Laursen, Paul B

    2017-09-27

    The purpose of this study was to compare the training intensity distribution (TID) of the undefeated world champion male rowing New Zealand (kiwi) pair over a four-year Olympic cycle, across training phases, training years, and between individuals. Training data, including heart rate and boat speed, were recorded in the athletes rowing in the same boat between March 2013 and August 2016, ending with the Rio Olympics final. Progressive exercise tests assessed first (LT1) and second (LT2) lactate thresholds and associated heart rates, to determine the percentage of training performed below, between and above these demarcation points. Training an average of only 12-15 h/wk throughout the Olympic cycle, the mean percent distribution of time (±SD) at each training intensity was 80.4 ± 5.5% LT2 for Rower A and 67.3 ± 9.0% LT2 for Rower B. Across the years 2014-2016, Rower A performed most likely more training training between LT1-LT2. Training appeared to become more polarised, with greater amounts of time spent training duration (R=0.38-0.43). Two of the world's best rowers, rowing together in the same boat with an undefeated record across an Olympic cycle, travelled markedly different "roads to Rio" within the context of their TID, with one rower displaying a polarised model of TID, and the other pyramidal. However, TID trended towards becoming more polarised in both rowers with increased training duration.

  18. Momentum distributions of Ne{sup n+} ions created by an intense ultrashort laser pulse

    Energy Technology Data Exchange (ETDEWEB)

    Moshammer, R. [Freiburg Univ. (Germany); Feuerstein, B.; Schmitt, W. (and others)

    1999-09-01

    Vector momentum distributions of Ne{sup n+} (n=1,2,3) ions created by 30 fs, {approx}1 PW/cm{sup 2} laser pulses at 795 nm have been measured using Recoil-Ion Momentum Spectroscopy. Distinct maxima along the light polarization axis are observed at 4.0 a.u. and 7.5 a.u. for Ne{sup 2+} and Ne{sup 3+} production, respectively. Hence, mechanisms based on an instantaneous release of two (or more) electrons can be ruled out as dominant contribution to non-sequential strong-field multiple ionization. The positions of the maxima are in accord with kinematical constraints set by the classical ''rescattering model''. (orig.)

  19. Spatial distribution and health risk assessment for groundwater contamination from intensive pesticide use in arid areas.

    Science.gov (United States)

    El Alfy, Mohamed; Faraj, Turki

    2017-02-01

    Arid and semiarid areas face major challenges in the management of scarce groundwater. This valuable resource is under pressures of population, economic expansion, contamination and over-exploitation. This research investigates groundwater vulnerability to pesticide contamination in the Al-Kharj area of Saudi Arabia. It explores the spatial distribution of pesticide concentrations in groundwater and other relevant factors. Thin permeable soils, permeable aquifers and shallow water tables, which are prevalent in the area, are especially vulnerable to pesticides. Analyses of 40 groundwater samples were performed using a gas chromatograph mass spectrometer coupled with a quadrupole mass spectrometer with a GC column. The analysis was conducted to detect 32 pesticides from different chemical families, and a total of 22 pesticides were detected. All 40 water samples were positive for at least one of the pesticides studied. In total, 21 compounds were above the quantification limit and 10 of them exceeded the legal limit. Total pesticide levels ranged from 0.18 to 2.21 μg/L, and 68 % of the analyzed samples exceeded the maximum allowable pesticide concentrations established by the European Community. Comparison of the daily intake peak (DIP) and daily intake mean (DIM) relative to the acceptable daily intake (ADI) shows that groundwater contamination with pesticides is a serious problem. Prolonged exposure to pesticides can cause adverse effects to human health and the ecosystem. Spatial distribution maps of groundwater contamination were developed using GIS. These maps will help risk managers identify vulnerable sources and provide a relative assessment of pesticide hazards to human health and the environment.

  20. No Additional Benefits of Block- Over Evenly-Distributed High-Intensity Interval Training within a Polarized Microcycle.

    Science.gov (United States)

    McGawley, Kerry; Juudas, Elisabeth; Kazior, Zuzanna; Ström, Kristoffer; Blomstrand, Eva; Hansson, Ola; Holmberg, Hans-Christer

    2017-01-01

    Introduction: The current study aimed to investigate the responses to block- versus evenly-distributed high-intensity interval training (HIT) within a polarized microcycle. Methods: Twenty well-trained junior cross-country skiers (10 males, age 17.6 ± 1.5 and 10 females, age 17.3 ± 1.5) completed two, 3-week periods of training (EVEN and BLOCK) in a randomized, crossover-design study. In EVEN, 3 HIT sessions (5 × 4-min of diagonal-stride roller-skiing) were completed at a maximal sustainable intensity each week while low-intensity training (LIT) was distributed evenly around the HIT. In BLOCK, the same 9 HIT sessions were completed in the second week while only LIT was completed in the first and third weeks. Heart rate (HR), session ratings of perceived exertion (sRPE), and perceived recovery (pREC) were recorded for all HIT and LIT sessions, while distance covered was recorded for each HIT interval. The recovery-stress questionnaire for athletes (RESTQ-Sport) was completed weekly. Before and after EVEN and BLOCK, resting saliva and muscle samples were collected and an incremental test and 600-m time-trial (TT) were completed. Results: Pre- to post-testing revealed no significant differences between EVEN and BLOCK for changes in resting salivary cortisol, testosterone, or IgA, or for changes in muscle capillary density, fiber area, fiber composition, enzyme activity (CS, HAD, and PFK) or the protein content of VEGF or PGC-1α. Neither were any differences observed in the changes in skiing economy, [Formula: see text] or 600-m time-trial performance between interventions. These findings were coupled with no significant differences between EVEN and BLOCK for distance covered during HIT, summated HR zone scores, total sRPE training load, overall pREC or overall recovery-stress state. However, 600-m TT performance improved from pre- to post-training, irrespective of intervention (P = 0.003), and a number of hormonal and muscle biopsy markers were also significantly

  1. No Additional Benefits of Block- Over Evenly-Distributed High-Intensity Interval Training within a Polarized Microcycle

    Directory of Open Access Journals (Sweden)

    Kerry McGawley

    2017-06-01

    Full Text Available Introduction: The current study aimed to investigate the responses to block- versus evenly-distributed high-intensity interval training (HIT within a polarized microcycle.Methods: Twenty well-trained junior cross-country skiers (10 males, age 17.6 ± 1.5 and 10 females, age 17.3 ± 1.5 completed two, 3-week periods of training (EVEN and BLOCK in a randomized, crossover-design study. In EVEN, 3 HIT sessions (5 × 4-min of diagonal-stride roller-skiing were completed at a maximal sustainable intensity each week while low-intensity training (LIT was distributed evenly around the HIT. In BLOCK, the same 9 HIT sessions were completed in the second week while only LIT was completed in the first and third weeks. Heart rate (HR, session ratings of perceived exertion (sRPE, and perceived recovery (pREC were recorded for all HIT and LIT sessions, while distance covered was recorded for each HIT interval. The recovery-stress questionnaire for athletes (RESTQ-Sport was completed weekly. Before and after EVEN and BLOCK, resting saliva and muscle samples were collected and an incremental test and 600-m time-trial (TT were completed.Results: Pre- to post-testing revealed no significant differences between EVEN and BLOCK for changes in resting salivary cortisol, testosterone, or IgA, or for changes in muscle capillary density, fiber area, fiber composition, enzyme activity (CS, HAD, and PFK or the protein content of VEGF or PGC-1α. Neither were any differences observed in the changes in skiing economy, V˙O2max or 600-m time-trial performance between interventions. These findings were coupled with no significant differences between EVEN and BLOCK for distance covered during HIT, summated HR zone scores, total sRPE training load, overall pREC or overall recovery-stress state. However, 600-m TT performance improved from pre- to post-training, irrespective of intervention (P = 0.003, and a number of hormonal and muscle biopsy markers were also significantly

  2. No Additional Benefits of Block- Over Evenly-Distributed High-Intensity Interval Training within a Polarized Microcycle

    Science.gov (United States)

    McGawley, Kerry; Juudas, Elisabeth; Kazior, Zuzanna; Ström, Kristoffer; Blomstrand, Eva; Hansson, Ola; Holmberg, Hans-Christer

    2017-01-01

    Introduction: The current study aimed to investigate the responses to block- versus evenly-distributed high-intensity interval training (HIT) within a polarized microcycle. Methods: Twenty well-trained junior cross-country skiers (10 males, age 17.6 ± 1.5 and 10 females, age 17.3 ± 1.5) completed two, 3-week periods of training (EVEN and BLOCK) in a randomized, crossover-design study. In EVEN, 3 HIT sessions (5 × 4-min of diagonal-stride roller-skiing) were completed at a maximal sustainable intensity each week while low-intensity training (LIT) was distributed evenly around the HIT. In BLOCK, the same 9 HIT sessions were completed in the second week while only LIT was completed in the first and third weeks. Heart rate (HR), session ratings of perceived exertion (sRPE), and perceived recovery (pREC) were recorded for all HIT and LIT sessions, while distance covered was recorded for each HIT interval. The recovery-stress questionnaire for athletes (RESTQ-Sport) was completed weekly. Before and after EVEN and BLOCK, resting saliva and muscle samples were collected and an incremental test and 600-m time-trial (TT) were completed. Results: Pre- to post-testing revealed no significant differences between EVEN and BLOCK for changes in resting salivary cortisol, testosterone, or IgA, or for changes in muscle capillary density, fiber area, fiber composition, enzyme activity (CS, HAD, and PFK) or the protein content of VEGF or PGC-1α. Neither were any differences observed in the changes in skiing economy, V˙O2max or 600-m time-trial performance between interventions. These findings were coupled with no significant differences between EVEN and BLOCK for distance covered during HIT, summated HR zone scores, total sRPE training load, overall pREC or overall recovery-stress state. However, 600-m TT performance improved from pre- to post-training, irrespective of intervention (P = 0.003), and a number of hormonal and muscle biopsy markers were also significantly altered

  3. Continuous Exercise but Not High Intensity Interval Training Improves Fat Distribution in Overweight Adults

    Directory of Open Access Journals (Sweden)

    Shelley E. Keating

    2014-01-01

    Full Text Available Objective. The purpose of this study was to assess the effect of high intensity interval training (HIIT versus continuous aerobic exercise training (CONT or placebo (PLA on body composition by randomized controlled design. Methods. Work capacity and body composition (dual-energy X-ray absorptiometry were measured before and after 12 weeks of intervention in 38 previously inactive overweight adults. Results. There was a significant group × time interaction for change in work capacity (P<0.001, which increased significantly in CONT (23.8±3.0% and HIIT (22.3±3.5% but not PLA (3.1±5.0%. There was a near-significant main effect for percentage trunk fat, with trunk fat reducing in CONT by 3.1±1.6% and in PLA by 1.1±0.4%, but not in HIIT (increase of 0.7±1.0% (P=0.07. There was a significant reduction in android fat percentage in CONT (2.7±1.3% and PLA (1.4±0.8% but not HIIT (increase of 0.8±0.7% (P=0.04. Conclusion. These data suggest that HIIT may be advocated as a time-efficient strategy for eliciting comparable fitness benefits to traditional continuous exercise in inactive, overweight adults. However, in this population HIIT does not confer the same benefit to body fat levels as continuous exercise training.

  4. Putative null distributions corresponding to tests of differential expression in the Golden Spike dataset are intensity dependent

    Directory of Open Access Journals (Sweden)

    Gaile Daniel P

    2007-04-01

    Full Text Available Abstract Background We provide a re-analysis of the Golden Spike dataset, a first generation "spike-in" control microarray dataset. The original analysis of the Golden Spike dataset was presented in a manuscript by Choe et al. and raised questions concerning the performance of several statistical methods for the control of the false discovery rate (across a set of tests for differential expression. These original findings are now in question as it has been reported that the p-values associated with the tests of differential expression for null probesets (i.e., probesets designed to be fold change 1 across the two arms of the experiment are not uniformly distributed. Two recent publications have speculated as to the reasons the null distributions are non-uniform. A publication by Dabney and Storey concludes that the non-uniform distributions of null p-values are the direct consequence of an experimental design which requires technical replicates to approximate biological replicates. Irizarry et al. identify four characteristics of the feature level data (three related to experimental design and one artifact. Irizarry et al. argue that the four observed characteristics imply that the assumptions common to most pre-processing algorithms are not satisfied and hence the expression measure methodologies considered by Choe et al. are likely to be flawed. Results We replicate and extend the analyses of Dabney and Storey and present our results in the context of a two stage analysis. We provide evidence that the Stage I pre-processing algorithms considered in Dabney and Storey fail to provide expression values that are adequately centered or scaled. Furthermore, we demonstrate that the distributions of the p-values, test statistics, and probabilities associated with the relative locations and variabilities of the Stage II expression values vary with signal intensity. We provide diagnostic plots and a simple logistic regression based test statistic to

  5. Simplified Equation to Evaluate the Stress Intensity Factor of an Arbitrarily Located Circumferential Crack in a Cylinder under Radial Temperature Distribution

    OpenAIRE

    飯井, 俊行; 渡邊, 勝彦

    1998-01-01

    A simplified equation to directly calculate the stress intensity factor of an arbitrarily located circumferential crack in a cylinder under radial temperature distribution was theoretically derived, based on the theory of cylindrical shell and compliance. The effects of the cylinder length and the crack position on the stress intensity factor can be evaluated by the equation. From the numerical illustration, it was shown that the stress intensity factor of a short cylinder is smaller than tha...

  6. Effects of topological defects and diatom vacancies on characteristic vibration modes and Raman intensities of zigzag single-walled carbon nanotubes.

    Science.gov (United States)

    Saidi, Wissam A

    2014-09-04

    Defects are ubiquitous in carbon nanotubes (CNTs), despite their large formation energies, and have astounding effects on their physicochemical properties. In this study, we employ density-functional theory (DFT) calculations to study systematically the atomic structure, stability, and characteristic vibrations of pristine and defected zigzag CNTs, where the defects are of the form of Stone-Wales (SW) and diatom vacancies (DV). The DFT optimized structures and the phonon modes are subsequently used in conjunction with a semiempirical bond-polarization model to study the nonresonant Raman spectra. For each defect type, we find two CNT structures with defects parallel or oblique to the tube axis. For the SW defects, the two structures have similar formation energies, whereas for the DV defect, only defects parallel to the tube axis are likely to exist. The results show that the defects induce a blue shift in the radial breathing mode (RBM) of metallic CNTs, whereas this mode is not shifted for semiconducting CNTs. However, the RBM shift or its Raman profile is not sensitive to the defect type. The G-band showed more sensitivity to the defects in the form of a red/blue shift in the frequency, or a partial/complete defragmentation of the G bands.

  7. ESTIMATION METHOD OF THE HOMODYNED K-DISTRIBUTION BASED ON THE MEAN INTENSITY AND TWO LOG-MOMENTS

    Science.gov (United States)

    DESTREMPES, FRANÇOIS; PORÉE, JONATHAN

    2013-01-01

    The homodyned K-distribution appears naturally in the context of random walks and provides a useful model for the distribution of the received intensity in a wide range of non-Gaussian scattering configurations, including medical ultrasonics. An estimation method for the homodyned K-distribution based on the first moment of the intensity and two log-moments (XU method), namely the X and U-statistics previously studied in the special case of the K-distribution, is proposed as an alternative to a method based on the first three moments of the intensity (MI method) or the amplitude (MA method), and a method based on the signal-to-noise ratio (SNR), the skewness and the kurtosis of two fractional orders of the amplitude (labeled RSK method). Properties of the X and U statistics for the homodyned K-distribution are proved, except for one conjecture. Using those properties, an algorithm based on the bisection method for monotonous functions was developed. The algorithm has a geometric rate of convergence. Various tests were performed to study the behavior of the estimators. It was shown with simulated data samples that the estimations of the parameters 1/α and 1/(κ + 1) of the homodyned K-distribution are preferable to the direct estimations of the clustering parameter α and the structure parameter κ (with respective relative root mean squared errors (RMSEs) of 0.63 and 0.13 as opposed to 1.04 and 4.37, when N = 1000). Tests on simulated ultrasound images with only diffuse scatterers (up to 10 per resolution cell) indicated that the XU estimator is overall more reliable than the other three estimators for the estimation of 1/α, with relative RMSEs of 0.79 (MI), 0.61 (MA), 0.53 (XU) and 0.67 (RSK). For the parameter 1/(κ + 1), the relative RMSEs were equal to 0.074 (MI), 0.075 (MA), 0.069 (XU) and 0.100 (RSK). In the case of a large number of scatterers (11 to 20 per resolution cell), the relative RMSEs of 1/α were equal to 1.43 (MI), 1.27 (MA), 1.25 (XU) and 1

  8. The Effect of Beam Intensity on Temperature Distribution in ADS Windowless Lead-Bismuth Eutectic Spallation Target

    Directory of Open Access Journals (Sweden)

    Jie Liu

    2014-01-01

    Full Text Available The spallation target is the component coupling the accelerator and the reactor and is regarded as the “heart” of the accelerator driven system (ADS. Heavy liquid metal lead-bismuth eutectic (LBE is served as core coolant and spallation material to carry away heat deposition of spallation reaction and produce high flux neutron. So it is very important to study the heat transfer process in the target. In this paper, the steady-state flow pattern has been numerically obtained and taken as the input for the nuclear physics calculation, and then the distribution of the extreme large power density of the heat load is imported back to the computational fluid dynamics as the source term in the energy equation. Through the coupling, the transient and steady-state temperature distribution in the windowless spallation target is obtained and analyzed based on the flow process and heat transfer. Comparison of the temperature distribution with the different beam intensity shows that its shape is the same as broken wing of the butterfly. Nevertheless, the maximum temperature as well as the temperature gradient is different. The results play an important role and can be applied to the further design and optimization of the ADS windowless spallation target.

  9. Vibrating minds

    CERN Document Server

    2009-01-01

    Ed Witten is one of the leading scientists in the field of string theory, the theory that describes elementary particles as vibrating strings. This week he leaves CERN after having spent a few months here on sabbatical. His wish is that the LHC will unveil supersymmetry.

  10. Magnetic resonance guided high-intensity focused ultrasound mediated hyperthermia improves the intratumoral distribution of temperature-sensitive liposomal doxorubicin.

    Science.gov (United States)

    de Smet, Mariska; Hijnen, Nicole M; Langereis, Sander; Elevelt, Aaldert; Heijman, Edwin; Dubois, Ludwig; Lambin, Philippe; Grüll, Holger

    2013-06-01

    The aim of this study was to investigate the intratumoral distribution of a temperature-sensitive liposomal carrier and its encapsulated compounds, doxorubicin, and a magnetic resonance (MR) imaging contrast agent after high-intensity focused ultrasound (HIFU)-mediated hyperthermia-induced local drug release. (111)In-labeled temperature-sensitive liposomes encapsulating doxorubicin and [Gd(HPDO3A) (H(2)O)] were injected intravenously in the tail vein of rats (n = 12) bearing a subcutaneous rhabdomyosarcoma tumor on the hind leg. Immediately after the injection, local tumor hyperthermia (2 × 15 minutes) was applied using a clinical 3 T MR-HIFU system. Release of [Gd(HPDO3A)(H(2)O)] was studied in vivo by measuring the longitudinal relaxation rate R(1) with MR imaging. The presence of the liposomal carriers and the intratumoral distribution of doxorubicin were imaged ex vivo with autoradiography and fluorescence microscopy, respectively, for 2 different time points after injection (90 minutes and 48 hours). In hyperthermia-treated tumors, radiolabeled liposomes were distributed more homogeneously across the tumor than in the control tumors (coefficient of variation(hyp, 90 min) = 0.7 ± 0.2; coefficient of variation(cntrl, 90 min) = 1.1 ± 0.2). At 48 hours after injection, the liposomal accumulation in the tumor was enhanced in the hyperthermia group in comparison with the controls. A change in R(1) was observed in the HIFU-treated tumors, suggesting release of the contrast agent. Fluorescence images showed perivascular doxorubicin in control tumors, whereas in the HIFU-treated tumors, the delivered drug was spread over a much larger area and also taken up by tumor cells at a larger distance from blood vessels. Treatment with HIFU hyperthermia not only improved the immediate drug delivery, bioavailability, and intratumoral distribution but also enhanced liposomal accumulation over time. The sum of these effects may have a significant contribution to the therapeutic

  11. Optimization of beam angles for intensity modulated radiation therapy treatment planning using genetic algorithm on a distributed computing platform.

    Science.gov (United States)

    Nazareth, Daryl P; Brunner, Stephen; Jones, Matthew D; Malhotra, Harish K; Bakhtiari, Mohammad

    2009-07-01

    Planning intensity modulated radiation therapy (IMRT) treatment involves selection of several angle parameters as well as specification of structures and constraints employed in the optimization process. Including these parameters in the combinatorial search space vastly increases the computational burden, and therefore the parameter selection is normally performed manually by a clinician, based on clinical experience. We have investigated the use of a genetic algorithm (GA) and distributed-computing platform to optimize the gantry angle parameters and provide insight into additional structures, which may be necessary, in the dose optimization process to produce optimal IMRT treatment plans. For an IMRT prostate patient, we produced the first generation of 40 samples, each of five gantry angles, by selecting from a uniform random distribution, subject to certain adjacency and opposition constraints. Dose optimization was performed by distributing the 40-plan workload over several machines running a commercial treatment planning system. A score was assigned to each resulting plan, based on how well it satisfied clinically-relevant constraints. The second generation of 40 samples was produced by combining the highest-scoring samples using techniques of crossover and mutation. The process was repeated until the sixth generation, and the results compared with a clinical (equally-spaced) gantry angle configuration. In the sixth generation, 34 of the 40 GA samples achieved better scores than the clinical plan, with the best plan showing an improvement of 84%. Moreover, the resulting configuration of beam angles tended to cluster toward the patient's sides, indicating where the inclusion of additional structures in the dose optimization process may avoid dose hot spots. Additional parameter selection in IMRT leads to a large-scale computational problem. We have demonstrated that the GA combined with a distributed-computing platform can be applied to optimize gantry angle

  12. Coupling biophysical processes and water rights to simulate spatially distributed water use in an intensively managed hydrologic system

    Science.gov (United States)

    Han, Bangshuai; Benner, Shawn G.; Bolte, John P.; Vache, Kellie B.; Flores, Alejandro N.

    2017-07-01

    Humans have significantly altered the redistribution of water in intensively managed hydrologic systems, shifting the spatiotemporal patterns of surface water. Evaluating water availability requires integration of hydrologic processes and associated human influences. In this study, we summarize the development and evaluation of an extensible hydrologic model that explicitly integrates water rights to spatially distribute irrigation waters in a semi-arid agricultural region in the western US, using the Envision integrated modeling platform. The model captures both human and biophysical systems, particularly the diversion of water from the Boise River, which is the main water source that supports irrigated agriculture in this region. In agricultural areas, water demand is estimated as a function of crop type and local environmental conditions. Surface water to meet crop demand is diverted from the stream reaches, constrained by the amount of water available in the stream, the water-rights-appropriated amount, and the priority dates associated with particular places of use. Results, measured by flow rates at gaged stream and canal locations within the study area, suggest that the impacts of irrigation activities on the magnitude and timing of flows through this intensively managed system are well captured. The multi-year averaged diverted water from the Boise River matches observations well, reflecting the appropriation of water according to the water rights database. Because of the spatially explicit implementation of surface water diversion, the model can help diagnose places and times where water resources are likely insufficient to meet agricultural water demands, and inform future water management decisions.

  13. Binomial probability distribution model-based protein identification algorithm for tandem mass spectrometry utilizing peak intensity information.

    Science.gov (United States)

    Xiao, Chuan-Le; Chen, Xiao-Zhou; Du, Yang-Li; Sun, Xuesong; Zhang, Gong; He, Qing-Yu

    2013-01-04

    Mass spectrometry has become one of the most important technologies in proteomic analysis. Tandem mass spectrometry (LC-MS/MS) is a major tool for the analysis of peptide mixtures from protein samples. The key step of MS data processing is the identification of peptides from experimental spectra by searching public sequence databases. Although a number of algorithms to identify peptides from MS/MS data have been already proposed, e.g. Sequest, OMSSA, X!Tandem, Mascot, etc., they are mainly based on statistical models considering only peak-matches between experimental and theoretical spectra, but not peak intensity information. Moreover, different algorithms gave different results from the same MS data, implying their probable incompleteness and questionable reproducibility. We developed a novel peptide identification algorithm, ProVerB, based on a binomial probability distribution model of protein tandem mass spectrometry combined with a new scoring function, making full use of peak intensity information and, thus, enhancing the ability of identification. Compared with Mascot, Sequest, and SQID, ProVerB identified significantly more peptides from LC-MS/MS data sets than the current algorithms at 1% False Discovery Rate (FDR) and provided more confident peptide identifications. ProVerB is also compatible with various platforms and experimental data sets, showing its robustness and versatility. The open-source program ProVerB is available at http://bioinformatics.jnu.edu.cn/software/proverb/ .

  14. Theoretical study of sum-frequency vibrational spectroscopy on limonene surface

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Ren-Hui, E-mail: zrh@iccas.ac.cn; Liu, Hao; Jing, Yuan-Yuan; Wang, Bo-Yang; Shi, Qiang [Beijing National Laboratory for Molecular Sciences, State Key Laboratory for Structural Chemistry of Unstable and Stable Species, Institute of Chemistry, Chinese Academy of Sciences, Zhongguancun, Beijing 100190 (China); Wei, Wen-Mei [Department of Chemistry, College of Basic Medicine, Anhui Medical University, Hefei, Anhui 230032 (China)

    2014-03-14

    By combining molecule dynamics (MD) simulation and quantum chemistry computation, we calculate the surface sum-frequency vibrational spectroscopy (SFVS) of R-limonene molecules at the gas-liquid interface for SSP, PPP, and SPS polarization combinations. The distributions of the Euler angles are obtained using MD simulation, the ψ-distribution is between isotropic and Gaussian. Instead of the MD distributions, different analytical distributions such as the δ-function, Gaussian and isotropic distributions are applied to simulate surface SFVS. We find that different distributions significantly affect the absolute SFVS intensity and also influence on relative SFVS intensity, and the δ-function distribution should be used with caution when the orientation distribution is broad. Furthermore, the reason that the SPS signal is weak in reflected arrangement is discussed.

  15. Full dimensional Franck-Condon factors for the acetylene tilde{{A}} 1Au—{tilde{X}} {^1Σ _g^+} transition. I. Method for calculating polyatomic linear—bent vibrational intensity factors and evaluation of calculated intensities for the gerade vibrational modes in acetylene

    Science.gov (United States)

    Park, G. Barratt

    2014-10-01

    Franck-Condon vibrational overlap integrals for the tilde{A} {^1A_u}—{tilde{X}} {^1Σ _g^+} transition in acetylene have been calculated in full dimension in the harmonic normal mode basis. The calculation uses the method of generating functions first developed for polyatomic Franck-Condon factors by Sharp and Rosenstock [J. Chem. Phys. 41(11), 3453-3463 (1964)], and previously applied to acetylene by Watson [J. Mol. Spectrosc. 207(2), 276-284 (2001)] in a reduced-dimension calculation. Because the transition involves a large change in the equilibrium geometry of the electronic states, two different types of corrections to the coordinate transformation are considered to first order: corrections for axis-switching between the Cartesian molecular frames and corrections for the curvilinear nature of the normal modes at large amplitude. The angular factor in the wavefunction for the out-of-plane component of the trans bending mode, ν _4^' ' }, is treated as a rotation, which results in an Eckart constraint on the polar coordinates of the bending modes. To simplify the calculation, the other degenerate bending mode, ν _5^' ' }, is integrated in the Cartesian basis and later transformed to the constrained polar coordinate basis, restoring the conventional v and l quantum numbers. An updated tilde{A}-state harmonic force field obtained recently in the R. W. Field research group is evaluated. The results for transitions involving the gerade vibrational modes are in qualitative agreement with experiment. Calculated results for transitions involving ungerade modes are presented in Paper II of this series [G. B. Park, J. H. Baraban, and R. W. Field, "Full dimensional Franck-Condon factors for the acetylene tilde{A} {^1A_u}—{tilde{X}} {^1Σ _g^+} transition. II. Vibrational overlap factors for levels involving excitation in ungerade modes," J. Chem. Phys. 141, 134305 (2014)].

  16. Vibrational dynamics of crystalline L-alanine

    Energy Technology Data Exchange (ETDEWEB)

    Bordallo, H.N.; Eckert, J. [Los Alamos National Lab., NM (United States); Barthes, M. [Univ. Montpellier II (France)

    1997-11-01

    The authors report a new, complete vibrational analysis of L-alanine and L-alanine-d{sub 4} which utilizes IINS intensities in addition to frequency information. The use of both isotopomers resulted in a self-consistent force field for and assignment of the molecular vibrations in L-alanine. Some details of the calculation as well as a comparison of calculated and observed IINS spectra are presented. The study clarifies a number of important issues on the vibrational dynamics of this molecule and presents a self-consistent force field for the molecular vibrations in crystalline L-alanine.

  17. Orientations of nonlocal vibrational modes from combined experimental and theoretical sum frequency spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Chase, Hilary M.; Chen, Shunli; Fu, Li; Upshur, Mary Alice; Rudshteyn, Benjamin; Thomson, Regan J.; Wang, Hong-Fei; Batista, Victor S.; Geiger, Franz M.

    2017-09-01

    Inferring molecular orientations from vibrational sum frequency generation (SFG) spectra is challenging in polarization combinations that result in low signal intensities, or when the local point group symmetry approximation fails. While combining experiments with density functional theory (DFT) could overcome this problem, the scope of the combined method has yet to be established. Here, we assess its feasibility of determining the distributions of molecular orientations for one monobasic ester, two epoxides and three alcohols at the vapor/fused silica interface. We find that molecular orientations of nonlocal vibrational modes cannot be determined using polarization-resolved SFG measurements alone.

  18. Vertical distribution of bacteria and intensity of microbiological processes in two stratified gypsum Karst Lakes in Lithuania

    Directory of Open Access Journals (Sweden)

    Krevs A.

    2011-08-01

    Full Text Available Physical-chemical parameters and the vertical distribution of bacteria and organic matter production-destruction processes were studied during midsummer stratification in two karst lakes (Kirkilai and Ramunelis located in northern Lithuania. The lakes were characterized by high sulfate concentrations (369–1248 mg·L-1. The O2/H2S intersection zone formed at 2–3 m depth. In Lake Kirkilai, the highest bacterial densities (up to 8.7 × 106 cell·mL-1 occurred at the O2/H2S intersection zone, whereas in Lake Ramunelis the highest densities were observed in the anoxic hypolimnion (up to 11 × 106 cell·mL-1. Pigment analysis revealed that green sulfur bacteria dominated in the microaerobic–anaerobic water layers in both lakes. The most intensive development of sulfate-reducing bacteria was observed in the anaerobic layer. Photosynthetic production of organic matter was highest in the upper layer. Rates of sulfate reduction reached 0.23 mg S2−·dm3·d-1 in the microaerobic-anaerobic water layer and 1.97 mg S2−·dm3·d-1 in sediments. Karst lakes are very sensitive to organic pollution, because under such impact in the presence of high sulfate amounts, sulfate reduction may become very intensive and, consequently, the increase in hydrogen sulfide and development of sulfur cycle bacteria may reduce the variety of other hydrobionts.

  19. Coupling biophysical processes and water rights to simulate spatially distributed water use in an intensively managed hydrologic system

    Directory of Open Access Journals (Sweden)

    B. Han

    2017-07-01

    Full Text Available Humans have significantly altered the redistribution of water in intensively managed hydrologic systems, shifting the spatiotemporal patterns of surface water. Evaluating water availability requires integration of hydrologic processes and associated human influences. In this study, we summarize the development and evaluation of an extensible hydrologic model that explicitly integrates water rights to spatially distribute irrigation waters in a semi-arid agricultural region in the western US, using the Envision integrated modeling platform. The model captures both human and biophysical systems, particularly the diversion of water from the Boise River, which is the main water source that supports irrigated agriculture in this region. In agricultural areas, water demand is estimated as a function of crop type and local environmental conditions. Surface water to meet crop demand is diverted from the stream reaches, constrained by the amount of water available in the stream, the water-rights-appropriated amount, and the priority dates associated with particular places of use. Results, measured by flow rates at gaged stream and canal locations within the study area, suggest that the impacts of irrigation activities on the magnitude and timing of flows through this intensively managed system are well captured. The multi-year averaged diverted water from the Boise River matches observations well, reflecting the appropriation of water according to the water rights database. Because of the spatially explicit implementation of surface water diversion, the model can help diagnose places and times where water resources are likely insufficient to meet agricultural water demands, and inform future water management decisions.

  20. Effect of Machine Smoking Intensity and Filter Ventilation Level on Gas-Phase Temperature Distribution Inside a Burning Cigarette

    Directory of Open Access Journals (Sweden)

    Li Bin

    2015-01-01

    Full Text Available Accurate measurements of cigarette coal temperature are essential to understand the thermophysical and thermo-chemical processes in a burning cigarette. The last system-atic studies of cigarette burning temperature measurements were conducted in the mid-1970s. Contemporary cigarettes have evolved in design features and multiple standard machine-smoking regimes have also become available, hence there is a need to re-examine cigarette combustion. In this work, we performed systematic measurements on gas-phase temperature of burning cigarettes using an improved fine thermocouple technique. The effects of machine-smoking parameters (puff volume and puff duration and filter ventilation levels were studied with high spatial and time resolutions during single puffs. The experimental results were presented in a number of differ-ent ways to highlight the dynamic and complex thermal processes inside a burning coal. A mathematical distribution equation was used to fit the experimental temperature data. Extracting and plotting the distribution parameters against puffing time revealed complex temperature profiles under different coal volume as a function of puffing intensities or filter ventilation levels. By dividing the coal volume prior to puffing into three temperature ranges (low-temperature from 200 to 400 °C, medium-temperature from 400 to 600 °C, and high-temperature volume above 600 °C by following their development at different smoking regimes, useful mechanistic details were obtained. Finally, direct visualisation of the gas-phase temperature through detailed temperature and temperature gradient contour maps provided further insights into the complex thermo-physics of the burning coal. [Beitr. Tabakforsch. Int. 26 (2014 191-203

  1. Urban vibrations

    DEFF Research Database (Denmark)

    Morrison, Ann; Knudsen, L.; Andersen, Hans Jørgen

    2012-01-01

      lab   studies   in   that   we   found   a   decreased   detection   rate   in   busy   environments.   Here   we   test   with   a   much   larger   sample   and   age   range,   and   contribute   with   the   first   vibration  sensitivity  testing  outside  the  lab  in  an  urban   public...

  2. [Species distribution of pathogens and prognostic factors for catheter-related bloodstream infections in intensive care unit].

    Science.gov (United States)

    Li, Jun; Yu, Li; Yang, Junhui; Long, Ding; Zhang, Yuanchao; Bu, Xiaofen

    2015-03-10

    To explore the incidence and species distribution of catheter-related bloodstream infection (CRBSI) in intensive care unit (ICU) at our hospital and analyze the risk factors for CRBSI. Hospitalized patients microbiologically diagnosed as CRBSI were recruited from January 2012 to June 2013. And the clinical data were collected retrospectively and analyzed by software IBM SPSS 19.0. Among 67 patients diagnosed as nosocomial CRBSI, 24 cases (35.8%) died while 43 survived. And a total of 81 strains were detected, including 42 Gram-positive (G⁺) bacteria (51.9%), 36 Gram-negative (G⁻) bacteria (44.4%) and 3 fungi (3.7%).The predominant pathogenic G⁺ and G⁻ bacteria were Staphylococcus epidermidis and Acinetobacter baumannii respectively. With multiple Logistic regressions, age ≥ 65 years, higher acute physiology & chronic health evaluation II (APACHE II) score and polymicrobial CRBSI were independent predictors of worse outcomes. The recent prevalent pathogens of CRBSI in ICU are S.epidermidis and A.baumannii. Advanced age, disease severity and polymicrobial CRBSI are significant independent risk factor of mortality for CRBSI patients in ICU.

  3. Theoretical analysis of the background intensity distribution in X-ray Birefringence Imaging using synchrotron bending-magnet radiation

    Science.gov (United States)

    Sutter, John P.; Dolbnya, Igor P.; Collins, Stephen P.; Harris, Kenneth D. M.; Edwards-Gau, Gregory R.; Palmer, Benjamin A.

    2015-04-01

    In the recently developed technique of X-ray Birefringence Imaging, molecular orientational order in anisotropic materials is studied by exploiting the birefringence of linearly polarized X-rays with energy close to an absorption edge of an element in the material. In the experimental setup, a vertically deflecting high-resolution double-crystal monochromator is used upstream from the sample to select the appropriate photon energy, and a horizontally deflecting X-ray polarization analyzer, consisting of a perfect single crystal with a Bragg reflection at Bragg angle of approximately 45°, is placed downstream from the sample to measure the resulting rotation of the X-ray polarization. However, if the experiment is performed on a synchrotron bending-magnet beamline, then the elliptical polarization of the X-rays out of the electron orbit plane affects the shape of the output beam. Also, because the monochromator introduces a correlation between vertical position and photon energy to the X-ray beam, the polarization analyzer does not select the entire beam, but instead selects a diagonal stripe, the slope of which depends on the Bragg angles of the monochromator and the polarization analyzer. In the present work, the final background intensity distribution is calculated analytically because the phase space sampling methods normally used in ray traces are too inefficient for this setup. X-ray Birefringence Imaging data measured at the Diamond Light Source beamline B16 agree well with the theory developed here.

  4. Theoretical analysis of the background intensity distribution in X-ray Birefringence Imaging using synchrotron bending-magnet radiation

    Energy Technology Data Exchange (ETDEWEB)

    Sutter, John P., E-mail: john.sutter@diamond.ac.uk; Dolbnya, Igor P.; Collins, Stephen P. [Diamond Light Source Ltd., Chilton, Didcot, Oxfordshire OX11 0DE (United Kingdom); Harris, Kenneth D. M.; Edwards-Gau, Gregory R. [School of Chemistry, Cardiff University, Park Place, Cardiff CF10 3AT, Wales (United Kingdom); Palmer, Benjamin A. [Department of Structural Biology, Weizmann Institute of Science, 234 Herzl St., Rehovot 7610001 (Israel)

    2015-04-28

    In the recently developed technique of X-ray Birefringence Imaging, molecular orientational order in anisotropic materials is studied by exploiting the birefringence of linearly polarized X-rays with energy close to an absorption edge of an element in the material. In the experimental setup, a vertically deflecting high-resolution double-crystal monochromator is used upstream from the sample to select the appropriate photon energy, and a horizontally deflecting X-ray polarization analyzer, consisting of a perfect single crystal with a Bragg reflection at Bragg angle of approximately 45°, is placed downstream from the sample to measure the resulting rotation of the X-ray polarization. However, if the experiment is performed on a synchrotron bending-magnet beamline, then the elliptical polarization of the X-rays out of the electron orbit plane affects the shape of the output beam. Also, because the monochromator introduces a correlation between vertical position and photon energy to the X-ray beam, the polarization analyzer does not select the entire beam, but instead selects a diagonal stripe, the slope of which depends on the Bragg angles of the monochromator and the polarization analyzer. In the present work, the final background intensity distribution is calculated analytically because the phase space sampling methods normally used in ray traces are too inefficient for this setup. X-ray Birefringence Imaging data measured at the Diamond Light Source beamline B16 agree well with the theory developed here.

  5. Foundations of data-intensive science: Technology and practice for high throughput, widely distributed, data management and analysis systems

    Science.gov (United States)

    Johnston, William; Ernst, M.; Dart, E.; Tierney, B.

    2014-04-01

    Today's large-scale science projects involve world-wide collaborations depend on moving massive amounts of data from an instrument to potentially thousands of computing and storage systems at hundreds of collaborating institutions to accomplish their science. This is true for ATLAS and CMS at the LHC, and it is true for the climate sciences, Belle-II at the KEK collider, genome sciences, the SKA radio telescope, and ITER, the international fusion energy experiment. DOE's Office of Science has been collecting science discipline and instrument requirements for network based data management and analysis for more than a decade. As a result of this certain key issues are seen across essentially all science disciplines that rely on the network for significant data transfer, even if the data quantities are modest compared to projects like the LHC experiments. These issues are what this talk will address; to wit: 1. Optical signal transport advances enabling 100 Gb/s circuits that span the globe on optical fiber with each carrying 100 such channels; 2. Network router and switch requirements to support high-speed international data transfer; 3. Data transport (TCP is still the norm) requirements to support high-speed international data transfer (e.g. error-free transmission); 4. Network monitoring and testing techniques and infrastructure to maintain the required error-free operation of the many R&E networks involved in international collaborations; 5. Operating system evolution to support very high-speed network I/O; 6. New network architectures and services in the LAN (campus) and WAN networks to support data-intensive science; 7. Data movement and management techniques and software that can maximize the throughput on the network connections between distributed data handling systems, and; 8. New approaches to widely distributed workflow systems that can support the data movement and analysis required by the science. All of these areas must be addressed to enable large

  6. On the use of computed radiography plates for quality assurance of intensity modulated radiation therapy dose distributions

    Energy Technology Data Exchange (ETDEWEB)

    Day, R. A.; Sankar, A. P.; Nailon, W. H.; MacLeod, A. S. [Department of Oncology Physics, Edinburgh Cancer Centre, Western General Hospital, Crewe Road South, Edinburgh EH4 2XU (United Kingdom)

    2011-02-15

    Purpose: As traditional film is phased out in most radiotherapy centers, computed radiography (CR) systems are increasingly being purchased as a replacement. CR plates can be used for patient imaging, but may also be used for a variety of quality assurance (QA) purposes and can be calibrated in terms of dose. This study looks at their suitability for verification of intensity modulated radiation therapy (IMRT) dose distributions. Methods: A CR plate was calibrated in terms of the relative dose and the stability of response over 1 year was studied. The effect of exposing the CR plate to ambient light and of using different time delays before scanning was quantified. The CR plate was used to verify the relative dose distributions for ten IMRT patients and the results were compared to those obtained using a two dimensional (2D) diode array. Results: Exposing the CR plate to 10 s of ambient light between irradiation (174 cGy) and scanning erased approximately 80% of the signal. Changes in delay time between irradiation and scanning also affected the measurement results. The signal on the plate was found to decay at a rate of approximately 3.6 cGy/min in the first 10 min after irradiation. The use of a CR plate for IMRT patient-specific QA resulted in a significantly lower distance to agreement (DTA) and gamma pass rate than when using a 2D diode array for the measurement. This was primarily due to the over-response of the CR phosphor to low energy scattered radiation. For the IMRT QA using the CR plate, the average gamma pass rate was 97.3%. For the same IMRT QA using a diode array, the average gamma pass rate was 99.7%. The gamma criteria used were 4% dose difference and 4 mm DTA for head and neck treatments and 3% dose difference and 3 mm DTA for prostate treatments. The gamma index tolerance was 1. The lowest 10% of the dose distribution was excluded from all gamma and DTA analyses. Conclusions: Although the authors showed that CR plates can be used for patient

  7. Theoretical studies on the electronic structure, charge distribution and vibrational spectra of diglyme-M(+)-AsF(6)(-) (M=Li, Na, K).

    Science.gov (United States)

    Pinjari, Rahul V; Joshi, Kaustubh A; Gejji, Shridhar P

    2008-12-01

    Electronic structure and the vibrational spectra of CH(3)(OCH(2)CH(2))(2)OCH(3)-M(+)-AsF(6)(-) (M=Li, Na, K) have been obtained using the density functional theory. Lithium ion exhibits a pentavalent coordination via 3 oxygens from diglyme and two fluorines of AsF(6)(-) whereas Na(+) and K(+) exhibit coordinate number 6 with 3 fluorines of the anion binding to alkali metal in these complexes. Analysis of calculated spectra reveal that the CH(2) wag (840-1120 cm(-1)) vibrations in the complex are sensitive to metal ion coordination. A frequency downshift relative to the free anion has been predicted for the vibrations of AsF(6)(-) anion when the fluorines are directly bonded (denoted by F) to metal ion. Consequent reorganization of electron density in the complex engenders a frequency shift in the opposite direction for As-F vibrations wherein the fluorine atoms are not coordinating to the alkali metal ion. An approach based on the molecular electron density topography coupled with the difference electron density map explains the direction of the frequency shifts of C-O-C and the As-F stretchings compared to those of free diglyme or AsF(6) anion. A new method, which includes the color-mapping function for the difference molecular electron density (MED), superimposed on the bond critical points in MED topography has been suggested to explain the direction of the frequency shifts in a single attempt.

  8. The Lowest Vibrational States of Urea from the Rotational Spectrum

    Science.gov (United States)

    Kisiel, Zbigniew; Thomas, Jessica; Medvedev, Ivan

    2014-06-01

    The urea molecule, (NH_2)_2CO, has a complex potential energy surface resulting from a combination of the NH_2 torsion and NH_2 inversion motions. This leads to a distribution of lowest vibrational states that is expected to be significantly different from the more familiar picture from simple inversion or normal mode models. The broadband 207-500 GHz spectrum of urea recorded in Dayton has signal to noise sufficient for assignment of rotational transitions in excited vibrational states up to at least 500 cm-1. In addition to the previously reported analysis of the ground and the lowest excited state we have been able to assign transitions in at least five other excited vibrational states. Strongly perturbed transitions in a close doublet of such states have been fitted to within experimental accuracy with a coupled fit and a splitting in the region of 1 cm-1. These assignments combined with vibrational energy estimates from relative intensity measurements allow for empirical discrimination between different models for the energy level manifestation of the large amplitude motions in urea.^b P.D.Godfrey, R.D.Brown, A.N.Hunter J. Mol. Struct., 413-414, 405-414 (1997). N.Inostroza, M.L.Senent, Chem. Phys. Lett., 524, 25 (2012).

  9. Conformational analysis and vibrational spectroscopic studies on dapsone

    Science.gov (United States)

    Ildiz, Gulce Ogruc; Akyuz, Sevim

    2012-11-01

    In this study, the theoretical conformation analysis of free dapsone has been performed by single point energy calculations at both semi-empirical PM3 and DFT/B3LYP-3-21G theory levels and three stable conformers were determined. Both the IR and Raman spectra of the molecule in solid phase have been recorded. The IR intensities and harmonic vibrational wavenumbers of each conformer were calculated by DFT method at B3LYP/6-31++G(d,p) theory level. For the fundamental characterization, the total energy distribution (TED) calculations of the vibrational modes were done using parallel quantum mechanic solution program (SQM) and the fundamental modes were assigned. The theoretical results are in agreement with the experimental ones.

  10. An examination of the vibration transmissibility of the hand-arm system in three orthogonal directions

    Science.gov (United States)

    Welcome, Daniel E.; Dong, Ren G.; Xu, Xueyan S.; Warren, Christopher; McDowell, Thomas W.; Wu, John Z.

    2015-01-01

    The objective of this study is to enhance the understanding of the vibration transmission in the hand-arm system in three orthogonal directions (X, Y, and Z). For the first time, the transmitted vibrations distributed on the entire hand-arm system exposed in the three orthogonal directions via a 3-D vibration test system were measured using a 3-D laser vibrometer. Seven adult male subjects participated in the experiment. This study confirms that the vibration transmissibility generally decreased with the increase in distance from the hand and it varied with the vibration direction. Specifically, to the upper arm and shoulder, only moderate vibration transmission was measured in the test frequency range (16 to 500 Hz), and virtually no transmission was measured in the frequency range higher than 50 Hz. The resonance vibration on the forearm was primarily in the range of 16–30 Hz with the peak amplitude of approximately 1.5 times of the input vibration amplitude. The major resonance on the dorsal surfaces of the hand and wrist occurred at around 30–40 Hz and, in the Y direction, with peak amplitude of more than 2.5 times of the input amplitude. At higher than 50 Hz, vibration transmission was effectively limited to the hand and fingers. A major finger resonance was observed at around 100 Hz in the X and Y directions and around 200 Hz in the Z direction. In the fingers, the resonance magnitude in the Z direction was generally the lowest, and the resonance magnitude in the Y direction was generally the highest with the resonance amplitude of 3 times the input vibration, which was similar to the transmissibility at the wrist and hand dorsum. The implications of the results are discussed. Relevance to industry Prolonged, intensive exposure to hand-transmitted vibration could result in hand-arm vibration syndrome. While the syndrome's precise mechanisms remain unclear, the characterization of the vibration transmissibility of the system in the three orthogonal

  11. Analysis of potential helicopter vibration reduction concepts

    Science.gov (United States)

    Landgrebe, A. J.; Davis, M. W.

    1985-01-01

    Results of analytical investigations to develop, understand, and evaluate potential helicopter vibration reduction concepts are presented in the following areas: identification of the fundamental sources of vibratory loads, blade design for low vibration, application of design optimization techniques, active higher harmonic control, blade appended aeromechanical devices, and the prediction of vibratory airloads. Primary sources of vibration are identified for a selected four-bladed articulated rotor operating in high speed level flight. The application of analytical design procedures and optimization techniques are shown to have the potential for establishing reduced vibration blade designs through variations in blade mass and stiffness distributions, and chordwise center-of-gravity location.

  12. Relationship Study on Land Use Spatial Distribution Structure and Energy-Related Carbon Emission Intensity in Different Land Use Types of Guangdong, China, 1996–2008

    Directory of Open Access Journals (Sweden)

    Yi Huang

    2013-01-01

    Full Text Available This study attempts to discuss the relationship between land use spatial distribution structure and energy-related carbon emission intensity in Guangdong during 1996–2008. We quantized the spatial distribution structure of five land use types including agricultural land, industrial land, residential and commercial land, traffic land, and other land through applying spatial Lorenz curve and Gini coefficient. Then the corresponding energy-related carbon emissions in each type of land were calculated in the study period. Through building the reasonable regression models, we found that the concentration degree of industrial land is negatively correlated with carbon emission intensity in the long term, whereas the concentration degree is positively correlated with carbon emission intensity in agricultural land, residential and commercial land, traffic land, and other land. The results also indicate that land use spatial distribution structure affects carbon emission intensity more intensively than energy efficiency and production efficiency do. These conclusions provide valuable reference to develop comprehensive policies for energy conservation and carbon emission reduction in a new perspective.

  13. Diameter Distributions and Basal Area of Pines and Hardwoods 12 Years Following Vairous Methods and Intensities of Site Preparation in the Georgia Peidmont

    Science.gov (United States)

    Timothy B. Harrington; M. Boyd Edwards

    1997-01-01

    Twelve years after various methods and intensities of site preparation in the Georgia Piedmont, diameter distributions and basal area (BA) of pines and hardwoods varied considerably among treatments. Site preparation reduced hardwood basal area to 36 percent of that observed in clearcut-only plots. As a result, planted-pine BA in the presence of site preparation was 2...

  14. Prediction and Measurement of X-Ray Spectral and Intensity Distributions from Low Energy Electron Impact Sources

    Science.gov (United States)

    Edwards, David L.

    1999-01-01

    In-vacuum electron beam welding is a technology that NASA considered as a joining technique for manufacture of space structures. The interaction of energetic electrons with metal produces x-rays. The radiation exposure to astronauts performing the in-vacuum electron beam welding must be characterized and minimized to insure safe operating conditions. This investigation characterized the x-ray environment due to operation of an in-vacuum electron beam welding tool. NASA, in a joint venture with the Russian Space Agency, was scheduled to perform a series of welding in space experiments on board the United States Space Shuttle. This series of experiments was named the International Space Welding Experiment (ISWE). The hardware associated with the ISWE was leased to NASA, by the Paton Welding Institute (PWI) in Ukraine, for ground based welding experiments in preparation for flight. Two tests were scheduled, using the ISWE electron beam welding tool, to characterize the radiation exposure to an astronaut during the operation of the ISWE. These radiation exposure tests consisted of Thermoluminescence Dosimeters (TLD's) shielded with material currently used by astronauts during Extra Vehicular Activities (EVA) and exposed to x-ray radiation generated by operation of an in-vacuum electron beam welding tool. This investigation was the first known application of TLD's to measure absorbed dose from x-rays of energy less than 10 KeV. The ISWE hardware was returned to Ukraine before the issue of adequate shielding for the astronauts was verified. Therefore, alternate experimental and analytical methods were developed to measure and predict the x-ray spectral and intensity distribution generated by electron impact with metal. These x-ray spectra were used to calculate the absorbed radiation dose to astronauts. These absorbed dose values were compared to TLD measurements obtained during actual operation of the in-vacuum electron beam welding tool. The calculated absorbed dose

  15. A interferência da posição corporal na transmissibilidade vibratória durante o treinamento com plataforma vibratória

    OpenAIRE

    Roberta Pires Vasconcellos; Gustavo Ricardo Schütz; Saray Giovana dos Santos

    2014-01-01

    Whole-body vibration training on vibrating platforms is widely used for physical exercise, health promotion and physical rehabilitation. The position on the platform is one of the factors responsible for the transmission of vibrations to the body segments of individuals. Therefore, the objective of this study was to compare the characteristics of vibrations transmitted to the body segments of adults between two body positions and different vibration intensities. Twenty intentionally selected ...

  16. Sensitization of a stray-field NMR to vibrations: a potential for MR elastometry with a portable NMR sensor.

    Science.gov (United States)

    Mastikhin, Igor; Barnhill, Marie

    2014-11-01

    An NMR signal from a sample in a constant stray field of a portable NMR sensor is sensitized to vibrations. The CPMG sequence is synchronized to vibrations so that the constant gradient becomes an "effective" square-wave gradient, leading to the vibration-induced phase accumulation. The integrating nature of the spot measurement, combined with the phase distribution due to a non-uniform gradient and/or a wave field, leads to a destructive interference, the drop in the signal intensity and changes in the echo train shape. Vibrations with amplitudes as small as 140 nm were reliably detected with the permanent gradient of 12.4 T/m. The signal intensity depends on the phase offset between the vibrations and the pulse sequence. This approach opens the way for performing elastometry and micro-rheology measurements with portable NMR devices beyond the walls of a laboratory. Even without synchronization, if a vibration frequency is comparable to 1/2TE of the CPMG sequence, the signal can be severely affected, making it important for potential industrial applications of stray-field NMR. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Assessment of the intensity-duration-frequency (IDF) curves for storms in Peninsular Malaysia based on the generalized extreme value distribution

    Science.gov (United States)

    Mohd Ariff, Noratiqah; Jemain, Abdul Aziz; Wan Zin, Wan Zawiah

    2013-04-01

    Rainfall characteristics can be analyzed by using storm events with storms representing actual rainfall events instead of rainfall amounts in fixed time frames. One of the most commonly used methods in rainfall analysis is the construction of intensity-duration-frequency (IDF) curves. IDF curves help in designing hydraulic structures by providing a mathematical relationship between storm intensity, duration and return period. In Peninsular Malaysia, these curves are often built using the generalized extreme value (GEV) distribution to represent annual maximum storm intensity. The mathematical formula for the curves is usually taken from either known empirical equations or from quantile functions of probability distributions. However, there is no research which compares and analyzes the differences between the curves obtained for storms in Peninsular Malaysia based on the empirical and quantile functions. Thus, the aim of this study is to build IDF curves for storms in Peninsular Malaysia using typical empirical equations and the quantile function of the GEV distribution. Then, the analysis of differences is performed on the curves obtained from both approaches. The analysis consists of the coefficient of variation of root mean square error mean percentage difference and the coefficient of determination, R2. The analysis shows small differences between the curves based on the empirical equations and those obtained using the quantile function of GEV distribution. According to these results, it can be concluded that the simple empirical equations are sufficient in constructing IDF curves based on GEV distribution for storms in Peninsular Malaysia.

  18. Vibrational Excitation Can Control Tropospheric Chemistry

    National Research Council Canada - National Science Library

    Geoffrey Tyndall

    2012-01-01

    .... However, on page 1066 of this issue, Glowacki et al. show that a strikingly different product distribution can be obtained in the oxidation of acetylene depending on whether the radicals contain high amounts of internal (vibrational...

  19. Two-stage stochastic day-ahead optimal resource scheduling in a distribution network with intensive use of distributed energy resources

    DEFF Research Database (Denmark)

    Sousa, Tiago; Ghazvini, Mohammad Ali Fotouhi; Morais, Hugo

    2015-01-01

    The integration of renewable sources and electric vehicles will introduce new uncertainties to the optimal resource scheduling, namely at the distribution level. These uncertainties are mainly originated by the power generated by renewables sources and by the electric vehicles charge requirements....... This paper proposes a two-state stochastic programming approach to solve the day-ahead optimal resource scheduling problem. The case study considers a 33-bus distribution network with 66 distributed generation units and 1000 electric vehicles....

  20. Quasi-classical trajectory-gaussian binning study of the OH + D2 → HOD(v1',v2',v3') + D angle-velocity and vibrational distributions at a collision energy of 0.28 eV.

    Science.gov (United States)

    Sierra, José Daniel; Bonnet, Laurent; González, Miguel

    2011-07-07

    The angle-velocity and product vibrational state distributions for the OH + D(2) reaction at a collision energy of 0.28 eV have been calculated using the quasi-classical trajectory-gaussian binning (QCT-GB) method and the Wu-Schatz-Lendvay-Fang-Harding (WSLFH) analytical potential energy surface. Comparison with high resolution molecular beam experiments shows that, differing from what happens when using the standard QCT method (i.e., histogram binning), very good results are obtained for both distributions. Hence, the strong differences previously observed between QCT and experimental results mainly come from an inadequate pseudoquantization of HOD rather than from other quantum effects. This is probably the first time that such a high level of agreement between theory and high resolution experimental data has been found in polyatomic reaction dynamics.

  1. Vibrational mechanics nonlinear dynamic effects, general approach, applications

    CERN Document Server

    Blekhman, Iliya I

    2000-01-01

    This important book deals with vibrational mechanics - the new, intensively developing section of nonlinear dynamics and the theory of nonlinear oscillations. It offers a general approach to the study of the effect of vibration on nonlinear mechanical systems.The book presents the mathematical apparatus of vibrational mechanics which is used to describe such nonlinear effects as the disappearance and appearance under vibration of stable positions of equilibrium and motions (i.e. attractors), the change of the rheological properties of the media, self-synchronization, self-balancing, the vibrat

  2. Vibration mode shape control by prestressing

    Science.gov (United States)

    Holnicki-Szulc, Jan; Haftka, Raphael T.

    1992-01-01

    A procedure is described for reducing vibration at sensitive locations on a structure, by induced distortions. The emphasis is placed on the excitation in a narrow frequency band, so that only a small number of vibration modes contribute to the intensity of the forced response. The procedure is demonstrated on an antenna truss example, showing that, with repeated frequencies, it is very easy to move nodal lines of one of the modes.

  3. Intensity-Stabilized Fast-Scanned Direct Absorption Spectroscopy Instrumentation Based on a Distributed Feedback Laser with Detection Sensitivity down to 4 × 10−6

    Directory of Open Access Journals (Sweden)

    Gang Zhao

    2016-09-01

    Full Text Available A novel, intensity-stabilized, fast-scanned, direct absorption spectroscopy (IS-FS-DAS instrumentation, based on a distributed feedback (DFB diode laser, is developed. A fiber-coupled polarization rotator and a fiber-coupled polarizer are used to stabilize the intensity of the laser, which significantly reduces its relative intensity noise (RIN. The influence of white noise is reduced by fast scanning over the spectral feature (at 1 kHz, followed by averaging. By combining these two noise-reducing techniques, it is demonstrated that direct absorption spectroscopy (DAS can be swiftly performed down to a limit of detection (LOD (1σ of 4 × 10−6, which opens up a number of new applications.

  4. Effects of light intensity on the distribution of anthocyanins in Kalanchoe brasiliensis Camb. and Kalanchoe pinnata (Lamk. Pers

    Directory of Open Access Journals (Sweden)

    Bruna P. Cruz

    2012-03-01

    Full Text Available This paper compares two medicinal species of Kalanchoe, which are often used interchangeably by the population, regarding the distribution of anthocyanins under the influence of four luminosity levels for 6 months. For the morphoanatomical analysis, the 6th stem node of each plant was sectioned. Usual histochemical tests revealed the presence of anthocyanins by cross sections of the stems, petioles and leaf blades. The petioles and leaf blades were submitted to the extraction with acidified methanol, and the anthocyanins were quantified by spectrophotometric readings. At the macroscopic level, it was noticed for both species a higher presence of anthocyanins in stems and petioles of plants under full sunlight. The microscopy of K. brasiliensis stems evidenced the deposition of anthocyanins in the subjacent tissue to the epidermis and cortex, which increased with light intensity. In K. pinnata a subepidermal collenchyma was observed, which interfered in the visualization of anthocyanins. In petioles and leaf blades of K. brasiliensis the deposition of anthocyanins was peripheral, and in K. pinnata it was also throughout the cortex. The quantification of anthocyanins in petioles showed in 70% of light higher averages than in 25%, but in leaf blades there were no significant results. This study contributes to the pharmacognosy of Kalanchoe and it is sustained by the description of flavonoids as biological markers of the genus.Este trabalho compara duas espécies medicinais de Kalanchoe utilizadas muitas vezes de forma indiferenciada pela população, quanto à distribuição de antocianinas sob influência de quatro níveis de luminosidade por 6 meses. Para a análise morfoanatômica foi seccionado o 6 º nó do caule de cada planta. Testes histoquímicos clássicos evidenciaram a presença de antocianinas em cortes transversais dos caules, pecíolos e lâminas foliares. Os pecíolos e lâminas foliares foram submetidos à extração com metanol

  5. Generalized Courant-Snyder theory and Kapchinskij-Vladimirskij distribution for high-intensity beams in a coupled transverse focusing latticea)

    Science.gov (United States)

    Qin, Hong; Davidson, Ronald C.

    2011-05-01

    The Courant-Snyder (CS) theory and the Kapchinskij-Vladimirskij (KV) distribution for high-intensity beams in an uncoupled focusing lattice are generalized to the case of coupled transverse dynamics. The envelope function is generalized to an envelope matrix, and the envelope equation becomes a matrix envelope equation with matrix operations that are noncommutative. In an uncoupled lattice, the KV distribution function, first analyzed in 1959, is the only known exact solution of the nonlinear Vlasov-Maxwell equations for high-intensity beams including self-fields in a self-consistent manner. The KV solution is generalized to high-intensity beams in a coupled transverse lattice using the generalized CS invariant. This solution projects to a rotating, pulsating elliptical beam in transverse configuration space. The fully self-consistent solution reduces the nonlinear Vlasov-Maxwell equations to a nonlinear matrix ordinary differential equation for the envelope matrix, which determines the geometry of the pulsating and rotating beam ellipse. These results provide us with a new theoretical tool to investigate the dynamics of high-intensity beams in a coupled transverse lattice. A strongly coupled lattice, a so-called N-rolling lattice, is studied as an example. It is found that strong coupling does not deteriorate the beam quality. Instead, the coupling induces beam rotation and reduces beam pulsation.

  6. Do Scaphoideus titanus (Hemiptera: Cicadellidae) nymphs use vibrational communication?

    Science.gov (United States)

    Chuche, Julien; Thiéry, Denis; Mazzoni, Valerio

    2011-07-01

    Small Auchenorrhyncha use substrate-borne vibrations to communicate. Although this behaviour is well known in adult leafhoppers, so far no studies have been published on nymphs. Here we checked the occurrence of vibrational communication in Scaphoideus titanus (Hemiptera: Cicadellidae) nymphs as a possible explanation of their aggregative distributions on host plants. We studied possible vibratory emissions of isolated and grouped nymphs, as well as their behavioural responses to vibration stimuli that simulated presence of conspecifics, to disturbance noise, white noise and predator spiders. None of our synthetic stimuli or pre-recorded substrate vibrations from nymphs elicited specific vibration responses and only those due to grooming or mechanical contacts of the insect with the leaf were recorded. Thus, S. titanus nymphs showed to not use species-specific vibrations neither for intra- nor interspecific communication and also did not produce alarm vibrations when facing potential predators. We conclude that their aggregative behaviour is independent from a vibrational communication.

  7. Time-series analysis of vibrational nuclear wave-packet dynamics in D2+

    Science.gov (United States)

    Thumm, Uwe; Niederhausen, Thomas; Feuerstein, Bernold

    2008-06-01

    We discuss the extent to which measured time-dependent fragment kinetic energy release (KER) spectra and calculated nuclear probability densities can reveal (1) the transition frequencies between stationary vibrational states, (2) the nodal structure of stationary vibrational states, (3) the ground-state adiabatic electronic potential curve of the molecular ion, and (4) the progression of decoherence induced by random interactions with the environment. We illustrate our discussion with numerical simulations for the time-dependent nuclear motion of vibrational wave packets in the D2+ molecular ion caused by the ionization of its neutral D2 parent molecule with an intense pump laser pulse. Based on a harmonic time-series analysis, we suggest a general scheme for the full reconstruction, up to an overall phase factor, of the initial wave packets based on measured KER spectra. We apply this scheme in a numerical simulation for vibrational wave packets in D2+ molecular ions and show how this reconstruction allows the clear distinction between commonly assumed stationary vibrational state distributions of the molecular ion following the ionization of D2 .

  8. Vibrational Power Flow Analysis of Rods and Beams

    Science.gov (United States)

    Wohlever, James Christopher; Bernhard, R. J.

    1988-01-01

    A new method to model vibrational power flow and predict the resulting energy density levels in uniform rods and beams is investigated. This method models the flow of vibrational power in a manner analogous to the flow of thermal power in a heat conduction problem. The classical displacement solutions for harmonically excited, hysteretically damped rods and beams are used to derive expressions for the vibrational power flow and energy density in the rod and beam. Under certain conditions, the power flow in these two structural elements will be shown to be proportional to the energy density gradient. Using the relationship between power flow and energy density, an energy balance on differential control volumes in the rod and beam leads to a Poisson's equation which models the energy density distribution in the rod and beam. Coupling the energy density and power flow solutions for rods and beams is also discussed. It is shown that the resonant behavior of finite structures complicates the coupling of solutions, especially when the excitations are single frequency inputs. Two coupling formulations are discussed, the first based on the receptance method, and the second on the travelling wave approach used in Statistical Energy Analysis. The receptance method is the more computationally intensive but is capable of analyzing single frequency excitation cases. The traveling wave approach gives a good approximation of the frequency average of energy density and power flow in coupled systems, and thus, is an efficient technique for use with broadband frequency excitation.

  9. Damage monitoring and impact detection using optical fiber vibration sensors

    Science.gov (United States)

    Yang, Y. C.; Han, K. S.

    2002-06-01

    Intensity-based optical fiber vibrations sensors (OFVSs) are used in damage monitoring of fiber-reinforced plastics, in vibration sensing, and location of impacts. OFVSs were constructed by placing two cleaved fiber ends in a capillary tube. This sensor is able to monitor structural vibrations. For vibration sensing, the optical fiber sensor was mounted on the carbon fiber reinforced composite beam, and its response was investigated for free and forced vibration. For locating impact points, four OFVSs were placed at chosen positions and the different arrival times of impact-generated vibration signals were recorded. The impact location can be determined from these time delays. Indentation and tensile tests were performed with the measurement of the optical signal and acoustic emission (AE). The OFVSs accurately detected both free and forced vibration signals. Accurate locations of impact were determined on an acrylate plate. It was found that damage information, comparable in quality to AE data, could be obtained from the OFVS signals.

  10. Entropy in sound and vibration: towards a new paradigm.

    Science.gov (United States)

    Le Bot, A

    2017-01-01

    This paper describes a discussion on the method and the status of a statistical theory of sound and vibration, called statistical energy analysis (SEA). SEA is a simple theory of sound and vibration in elastic structures that applies when the vibrational energy is diffusely distributed. We show that SEA is a thermodynamical theory of sound and vibration, based on a law of exchange of energy analogous to the Clausius principle. We further investigate the notion of entropy in this context and discuss its meaning. We show that entropy is a measure of information lost in the passage from the classical theory of sound and vibration and SEA, its thermodynamical counterpart.

  11. Tunable Passive Vibration Suppressor

    Science.gov (United States)

    Boechler, Nicholas (Inventor); Dillon, Robert Peter (Inventor); Daraio, Chiara (Inventor); Davis, Gregory L. (Inventor); Shapiro, Andrew A. (Inventor); Borgonia, John Paul C. (Inventor); Kahn, Daniel Louis (Inventor)

    2016-01-01

    An apparatus and method for vibration suppression using a granular particle chain. The granular particle chain is statically compressed and the end particles of the chain are attached to a payload and vibration source. The properties of the granular particles along with the amount of static compression are chosen to provide desired filtering of vibrations.

  12. Vibrations and Eigenvalues

    Indian Academy of Sciences (India)

    We make music by causing strings, membranes, or air columns to vibrate. Engineers design safe structures by control- ling vibrations. I will describe to you a very simple vibrating system and the mathematics needed to analyse it. The ideas were born in the work of Joseph-Louis Lagrange (1736–1813), and I begin by quot-.

  13. Spatial distribution of soils determines export of nitrogen and dissolved organic carbon from an intensively managed agricultural landscape

    DEFF Research Database (Denmark)

    Wohlfart, T; Exbrayat, J-F; Schelde, Kirsten

    2012-01-01

    The surrounding landscape of a stream has crucial impacts on the aquatic environment. This study pictures the hydro-biogeochemical situation of the Tyrebækken creek catchment in central Jutland, Denmark. The intensively managed agricultural landscape is dominated by rotational croplands. The small...... nitrogen (TDN), nitrate (NO3−), ammonium nitrogen and dissolved organic carbon (DOC) concentrations were measured, and dissolved organic nitrogen (DON) was calculated for each grabbed sample. Electrical conductivity, pH and flow velocity were measured during sampling. Statistical analyses showed...

  14. Rotation of the trajectories of bright solitons and realignment of intensity distribution in the coupled nonlinear Schrödinger equation.

    Science.gov (United States)

    Radha, R; Vinayagam, P S; Porsezian, K

    2013-09-01

    We reconsider the collisional dynamics of bright solitons in the coupled nonlinear Schrödinger equation. We observe that apart from the intensity redistribution in the interaction of bright solitons, one also witnesses a rotation of the trajectories of bright solitons. The angle of rotation can be varied by suitably manipulating the self-phase-modulation (SPM) or cross-phase-modulation (XPM) parameters. The rotation of the trajectories of the bright solitons arises due to the excess energy that is injected into the dynamical system through SPM or XPM. This extra energy contributes not only to the rotation of the trajectories, but also to the realignment of intensity distribution between the two modes. We also notice that the angular separation between the bright solitons can also be maneuvered suitably. The above results, which exclude quantum superposition for the field vectors, may have wider ramifications in nonlinear optics, Bose-Einstein condensates, and left- and right-handed metamaterials.

  15. Temperature-dependent vibration analysis of a FG viscoelastic cylindrical microshell under various thermal distribution via modified length scale parameter: a numerical solution

    Science.gov (United States)

    Safarpour, Hamed; Mohammadi, Kianoosh; Ghadiri, Majid

    2017-04-01

    In this article, the vibrational analysis of temperature-dependent cylindrical functionally graded (FG) microshells surrounded by viscoelastic a foundation is investigated by means of the modified couple stress theory (MCST). MCST is applied to this model to be productive in design and analysis of micro actuators and micro sensors. The modeled cylindrical FG microshell, its equations of motion and boundary conditions are derived by Hamilton's principle and the first-order shear deformation theory (FSDT). For the first time, in the present study, functionally graded length scale parameter which changes along the thickness has been considered in the temperature-dependent cylindrical FG microshell. The accuracy of the present model is verified with previous studies and also with those obtained by analytical Navier method. The novelty of the current study is consideration of viscoelastic foundation, various thermal loadings and size effect as well as satisfying various boundary conditions implemented on the temperature-dependent cylindrical FG microshell using MCST. Generalized differential quadrature method (GDQM) is applied to discretize the equations of motion. Then, some factors are investigated such as the influence of length to radius ratio, damping, Winkler and Pasternak foundations, different temperature changes, circumferential wave numbers, and boundary conditions on natural frequency of the cylindrical FG microshell. The results have many applications such as modeling of microrobots and biomedical microsystems.

  16. Increased dietary protein and combined high intensity aerobic and resistance exercise improves body fat distribution and cardiovascular risk factors.

    Science.gov (United States)

    Arciero, Paul J; Gentile, Christopher L; Martin-Pressman, Roger; Ormsbee, Michael J; Everett, Meghan; Zwicky, Lauren; Steele, Christine A

    2006-08-01

    We investigated the effectiveness of two lifestyle modification programs of exercise training and nutritional intake (ad libitum) on improving body composition and disease risk in overweight/obese men and women. Sixty-three subjects were weight matched and assigned to one of three groups for a 12 wk intervention: (1) high-intensity resistance and cardiovascular training and a balanced diet (RC+BD, 40% CHO: 40% PRO; n=27, 16 female/11 male, age = 42 +/- 9 y); (2) moderate-intensity cardiovascular training and a traditional food guide pyramid diet (C+TD, CHO 50 to 55%; PRO 15 to 20%; FAT TD and C. Total cholesterol (-13.8%), LDL-cholesterol (-20.8%), and systolic blood pressure (-5.7%) declined (P > 0.05) in RC+BD, whereas C+TD and C remained unchanged. Our results suggest that RC+BD may be more effective than C+TD and C in enhancing body composition and lowering cardiovascular risk in obese individuals.

  17. Vibration analysis of cryocoolers

    Science.gov (United States)

    Tomaru, Takayuki; Suzuki, Toshikazu; Haruyama, Tomiyoshi; Shintomi, Takakazu; Yamamoto, Akira; Koyama, Tomohiro; Li, Rui

    2004-05-01

    The vibrations of Gifford-McMahon (GM) and pulse-tube (PT) cryocoolers were measured and analyzed. The vibrations of the cold-stage and cold-head were measured separately to investigate their vibration mechanisms. The measurements were performed while maintaining the thermal conditions of the cryocoolers at a steady state. We found that the vibration of the cold-head for the 4 K PT cryocooler was two orders of magnitude smaller than that of the 4 K GM cryocooler. On the other hand, the vibration of the cold-stages for both cryocoolers was of the same order of magnitude. From a spectral analysis of the vibrations and a simulation, we concluded that the vibration of the cold-stage is caused by an elastic deformation of the pulse tubes (or cylinders) due to the pressure oscillation of the working gas.

  18. Vibration analysis of cryocoolers

    Energy Technology Data Exchange (ETDEWEB)

    Tomaru, Takayuki; Suzuki, Toshikazu; Haruyama, Tomiyoshi; Shintomi, Takakazu; Yamamoto, Akira [High Energy Accelerator Research Organization (KEK), Tsukuba, Ibaraki (Japan); Koyama, Tomohiro; Rui Li [Sumitomo Heavy Industries Ltd., Tokyo (Japan)

    2004-05-01

    The vibrations of Gifford-McMahon (GM) and pulse-tube (PT) cryocoolers were measured and analyzed. The vibrations of the cold-stage and cold-head were measured separately to investigate their vibration mechanisms. The measurements were performed while maintaining the thermal conditions of the cryocoolers at a steady state. We found that the vibration of the cold-head for the 4 K PT cryocooler was two orders of magnitude smaller than that of the 4 K GM cryocooler. On the other hand, the vibration of the cold-stages for both cryocoolers was of the same order of magnitude. From a spectral analysis of the vibrations and a simulation, we concluded that the vibration of the cold-stage is caused by an elastic deformation of the pulse tubes (or cylinders) due to the pressure oscillation of the working gas. (Author)

  19. Vibration of hydraulic machinery

    CERN Document Server

    Wu, Yulin; Liu, Shuhong; Dou, Hua-Shu; Qian, Zhongdong

    2013-01-01

    Vibration of Hydraulic Machinery deals with the vibration problem which has significant influence on the safety and reliable operation of hydraulic machinery. It provides new achievements and the latest developments in these areas, even in the basic areas of this subject. The present book covers the fundamentals of mechanical vibration and rotordynamics as well as their main numerical models and analysis methods for the vibration prediction. The mechanical and hydraulic excitations to the vibration are analyzed, and the pressure fluctuations induced by the unsteady turbulent flow is predicted in order to obtain the unsteady loads. This book also discusses the loads, constraint conditions and the elastic and damping characters of the mechanical system, the structure dynamic analysis, the rotor dynamic analysis and the system instability of hydraulic machines, including the illustration of monitoring system for the instability and the vibration in hydraulic units. All the problems are necessary for vibration pr...

  20. S-matrix analysis of coincident measurement of two-electron energy distribution for double ionization of He in an intense laser field.

    Science.gov (United States)

    Becker, A; Faisal, F H M

    2002-11-04

    Analyses of two mechanisms of double ionization of He in an intense femtosecond laser pulse are made within the S-matrix theory. Their contributions are compared with each other and with the recent data of coincidence measurements for two-electron energy distributions. It is found that the correlated energy-sharing mechanism reproduces the data remarkably well and also confirms the so-called "excessive production" of hot electrons in the process. In contrast, the shakeoff mechanism is found to fail completely to account for either the strength or the trend of the data and is therefore ruled out.

  1. Stochastic many-body perturbation theory for anharmonic molecular vibrations

    Energy Technology Data Exchange (ETDEWEB)

    Hermes, Matthew R. [Department of Chemistry, University of Illinois at Urbana-Champaign, 600 South Mathews Avenue, Urbana, Illinois 61801 (United States); Hirata, So, E-mail: sohirata@illinois.edu [Department of Chemistry, University of Illinois at Urbana-Champaign, 600 South Mathews Avenue, Urbana, Illinois 61801 (United States); CREST, Japan Science and Technology Agency, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 (Japan)

    2014-08-28

    A new quantum Monte Carlo (QMC) method for anharmonic vibrational zero-point energies and transition frequencies is developed, which combines the diagrammatic vibrational many-body perturbation theory based on the Dyson equation with Monte Carlo integration. The infinite sums of the diagrammatic and thus size-consistent first- and second-order anharmonic corrections to the energy and self-energy are expressed as sums of a few m- or 2m-dimensional integrals of wave functions and a potential energy surface (PES) (m is the vibrational degrees of freedom). Each of these integrals is computed as the integrand (including the value of the PES) divided by the value of a judiciously chosen weight function evaluated on demand at geometries distributed randomly but according to the weight function via the Metropolis algorithm. In this way, the method completely avoids cumbersome evaluation and storage of high-order force constants necessary in the original formulation of the vibrational perturbation theory; it furthermore allows even higher-order force constants essentially up to an infinite order to be taken into account in a scalable, memory-efficient algorithm. The diagrammatic contributions to the frequency-dependent self-energies that are stochastically evaluated at discrete frequencies can be reliably interpolated, allowing the self-consistent solutions to the Dyson equation to be obtained. This method, therefore, can compute directly and stochastically the transition frequencies of fundamentals and overtones as well as their relative intensities as pole strengths, without fixed-node errors that plague some QMC. It is shown that, for an identical PES, the new method reproduces the correct deterministic values of the energies and frequencies within a few cm{sup −1} and pole strengths within a few thousandths. With the values of a PES evaluated on the fly at random geometries, the new method captures a noticeably greater proportion of anharmonic effects.

  2. Pediatric Sarcomas Are Targetable by MR-Guided High Intensity Focused Ultrasound (MR-HIFU): Anatomical Distribution and Radiological Characteristics.

    Science.gov (United States)

    Shim, Jenny; Staruch, Robert M; Koral, Korgun; Xie, Xian-Jin; Chopra, Rajiv; Laetsch, Theodore W

    2016-10-01

    Despite intensive therapy, children with metastatic and recurrent sarcoma or neuroblastoma have a poor prognosis. Magnetic resonance guided high intensity focused ultrasound (MR-HIFU) is a noninvasive technique allowing the delivery of targeted ultrasound energy under MR imaging guidance. MR-HIFU may be used to ablate tumors without ionizing radiation or target chemotherapy using hyperthermia. Here, we evaluated the anatomic locations of tumors to assess the technical feasibility of MR-HIFU therapy for children with solid tumors. Patients with sarcoma or neuroblastoma with available cross-sectional imaging were studied. Tumors were classified based on the location and surrounding structures within the ultrasound beam path as (i) not targetable, (ii) completely or partially targetable with the currently available MR-HIFU system, and (iii) potentially targetable if a respiratory motion compensation technique was used. Of the 121 patients with sarcoma and 61 patients with neuroblastoma, 64% and 25% of primary tumors were targetable at diagnosis, respectively. Less than 20% of metastases at diagnosis or relapse were targetable for both sarcoma and neuroblastoma. Most targetable lesions were located in extremities or in the pelvis. Respiratory motion compensation may increase the percentage of targetable tumors by 4% for sarcomas and 10% for neuroblastoma. Many pediatric sarcomas are localized at diagnosis and are targetable by current MR-HIFU technology. Some children with neuroblastoma have bony tumors targetable by MR-HIFU at relapse, but few newly diagnosed children with neuroblastoma have tumors amenable to MR-HIFU therapy. Clinical trials of MR-HIFU should focus on patients with anatomically targetable tumors. © 2016 Wiley Periodicals, Inc.

  3. The Evaluation of the Distribution and Antimcrobial Susceptibility Profile of the Strains Isolated at Anesthesiology Intensive Care Unit

    Directory of Open Access Journals (Sweden)

    Gulfem Ece

    2013-10-01

    Full Text Available Aim: Hospital infections are important uptodate health problems because of high mortality and increased cost. The increment in antimicrobial resistance is progressing though new antimicrobial agents are arising. This leads to an increase in hospital infections and difficulty in treatment. In our study we aimed to evaluate the antimicrobial susceptibility of the strains isolated at Anesthesiology Intensive Care Unit. Material and Method: The antimicrobial susceptibility of the strains isolated at Anesthesiology Intensive Care Unit between April 1st 2012- October 25th 2012 were included. The identification and the antimicrobial susceptibility were studied by automatized Vitek version 2.0 (Biomerieux, France. Results: A total of 155 strains isolated from wound, blood, tracheal secretion, sputum and urine samples were included. They are consisted of 40 A. baumannii, 24 E.coli, 25 P. aeruginosa, 20 K.pneumoniae, 12 Methicilin Resistant Coagulase Negative Staphylococci (MRCoNS, nine Methiciline Susceptible S.aureus (MSSA, eight C.albicans, four Methicilin Resistant S.aureus (MRSA, one C.famata, one C.tropicalis, three E.faecalis, two E.faecium, three S.marsecens, two P. mirabilis and one H.influenzae. Clinical samples were 81 tracheal secretions, 25 wound specimen, 23 blood culture, 18 urine, seven sputum, and one BAL. All the Gram positive strains were susceptible to glycopeptides. Enterobacteriaceae members were susceptible to imipenem and meropenem. Discussion: Antimicrobial resistance is an important issue worldwide. Multidiciplinary approach is needed as in ICUs where the complicated patients are followed. Monitoring antibiotic resistance profile contributes to treatment and decreasing resistance rates. The resistance profile will guide the antibiotic use policy. Increment in number of isolates in future will help to obtain the antimicrobial resistance profile.

  4. Confirmation of spectral jitter: a measured shift in the spectral distribution of intense pulsed light systems using a time-resolved spectrometer during exposure and increased fluence.

    Science.gov (United States)

    Ash, C; Town, G; Clement, M

    2010-02-01

    High quality intense pulsed light (IPL) systems can offer simple, safe and effective treatments for long-term hair reduction, skin rejuvenation and removal of benign vascular and pigmented lesions. Considerable differences in clinical efficacy and adverse effects have been recorded amongst different IPL systems despite comparable display settings. This study examines the variation in pulse structures exhibited by several popular professional IPL systems that can cause a spectral change within the broadband output depending on the pulse structure chosen by the system designers. A fast spectrometer was used to capture IPL spectral outputs. A spectral distribution shift that occurs both within a pulse and between pulses is clearly demonstrated and is more prominent with uncontrolled free discharge systems than with square pulsed technology, which provides a constant spectral distribution throughout the pulse duration.

  5. Vibration Transmission in a Multi-Storey Lightweight Building

    DEFF Research Database (Denmark)

    Niu, Bin; Andersen, Lars Vabbersgaard; Kiel, Nikolaj

    2012-01-01

    This paper develops a parametric modelling and analysis approach to investigate the vibration transmission in lightweight buildings. The main focus of the research is to investigate the influence of geometry and configuration of the building on the vibration transmission. A building with a single...... the modelling of different connections between panels in the building [2]. Using this parametric building model, free vibration analysis is first performed to obtain the distribution of Eigen frequencies of the building. Then the forced vibration of the building subjected to a mechanical excitation is analysed...... to investigate the transmission of vibration. The influence of different excitation frequencies on the vibration transmission is studied and discussed. The vibration response in two different receiving rooms, one near the source and one far from the source, is illustrated and discussed for the various geometric...

  6. A series approximation model for optical light transport and output intensity field distribution in large aspect ratio cylindrical scintillation crystals

    Energy Technology Data Exchange (ETDEWEB)

    Tobias, Benjamin John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-09

    A series approximation has been derived for the transport of optical photons within a cylindrically symmetric light pipe and applied to the task of evaluating both the origin and angular distribution of light reaching the output plane. This analytic expression finds particular utility in first-pass photonic design applications since it may be evaluated at a very modest computational cost and is readily parameterized for relevant design constraints. It has been applied toward quantitative exploration of various scintillation crystal preparations and their impact on both quantum efficiency and noise, reproducing sensible dependencies and providing physical justification for certain gamma ray camera design choices.

  7. Geometry optimization and vibrational frequencies of tetracene ...

    African Journals Online (AJOL)

    Tetracene is an organic semiconductor with chemical formula C18H12 used in organic field effecttransistor (OFET) and organic light emitting diode (OLED). In this work, the molecular geometry (optimized bond lengths and bond angles), vibrational frequencies and intensities, HOMO-LUMO Energy gap and Atomic charge ...

  8. Investigation and development of a measurement technique for the spatial energy distribution of home-use intense pulsed light (IPL) systems.

    Science.gov (United States)

    Thomas, G; Ash, C; Hugtenburg, R P; Kiernan, M; Town, G; Clement, M

    2011-01-01

    The current annual global market for domestic intense pulse light (IPL) hair removal has been estimated at US $1 billion and continues to grow. The five key technological parameters to consider in cutaneous photo-therapy are wavelength, energy density, pulse duration, spot size and spatial distribution. Uneven energy distribution in the treatment area can result in over or under treatment of the treated area, thus causing dissatisfaction or harmful results. This study investigates a method of measuring and analysing spatial distribution of a number of commercially available home-use IPL systems as there is no quantitative method to conduct and compare spatial distribution at the present. Using a CCD camera and a phosphorescent screen to extend the pulse duration, averaged time frames were analysed using Matlab mathematic software. 3D graphical images of the data are presented to show the spatial profile of five commercially available IPL systems. Numerical analysis of the data was completed by two methods, arithmetical mean roughness and path difference.

  9. Measurement of angular distributions of K x-ray intensity of Ti and Cu thick targets following impact of 10–25 keV electrons

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Bhupendra; Kumar, Sunil; Prajapati, Suman; Singh, Bhartendu K. [Atomic Physics Laboratory, Department of Physics, Institute of Science, Banaras Hindu University, Varanasi 221005 (India); Llovet, Xavier [Scientific and Technological Centers, Universitat de Barcelona, Lluís Solé i Sabarís 1-3, 08028 Barcelona (Spain); Shanker, R., E-mail: shankerorama@gmail.com [Atomic Physics Laboratory, Department of Physics, Institute of Science, Banaras Hindu University, Varanasi 221005 (India)

    2017-04-15

    Highlights: • New results on the angular distributions of relative intensities of K-X-rays lines of Ti and Cu thick targets under electron bombardment are reported. • An increase of relative intensity of Kα and Kβ X-ray lines has been found to be about 60–70% in the detection range θ = 105{sup 0}–165{sup 0}. • There is a slight impact energy dependence of Cu Kα X-ray line. • A reasonable agreement between experimental and PENELOPE MC Calculations are obtained. - Abstract: We present new results on angular distributions of the relative intensity of K{sub α} and K{sub β} x-ray lines of thick targets of Ti (Z = 22) and Cu (Z = 29) pure elements following impact of 10–25 keV electrons. The angular measurements of the K x-radiations were accomplished by rotating the target surface with respect to the electron beam direction. The x-rays emerging from the target surface in reflection mode were detected by an energy dispersive Si P-I-N photodiode detector. The resulting variation of the relative intensity of the characteristic lines as a function of angle of detection and impact energy has been found to be anisotropic and it is considered to arise due to change in path lengths at a given incidence angle α for the photons generated by direct as well as by indirect K shell ionization processes. The measured angular variations of relative intensity of K{sub α} and K{sub β} x-ray lines of both targets are found to increase by about 60–70% in going from θ = 105{sup 0} to 165{sup 0} at a given impact energy; however there is a slight indication of impact energy dependence of Cu K{sub α} x-ray line as also noted by the earlier workers. We compare the experimental results with those obtained by Monte Carlo simulations using PENELOPE calculations; the agreement between experiment and theory is found to be satisfactory within uncertainties involved in the measurements and the theoretical results.

  10. [Effects of precipitation intensity on soil organic carbon fractions and their distribution under subtropical forests of South China].

    Science.gov (United States)

    Chen, Xiao-mei; Liu, Ju-xiu; Deng, Qi; Chu, Guo-wei; Zhou, Guo-yi; Zhang, De-qiang

    2010-05-01

    From December 2006 to June 2008, a field experiment was conducted to study the effects of natural precipitation, doubled precipitation, and no precipitation on the soil organic carbon fractions and their distribution under a successional series of monsoon evergreen broad-leaf forest, pine and broad-leaf mixed forest, and pine forest in Dinghushan Mountain of Southern China. Different precipitation treatments had no significant effects on the total organic carbon (TOC) concentration in the same soil layer under the same forest type (P > 0.05). In treatment no precipitation, particulate organic carbon (POC) and light fraction organic carbon (LFOC) were mainly accumulated in surface soil layer (0-10 cm); but in treatments natural precipitation and doubled precipitation, the two fractions were infiltrated to deeper soil layers. Under pine forest, soil readily oxidizable organic carbon (ROC) was significantly higher in treatment no precipitation than in treatments natural precipitation and doubled precipitation (P labile components POC, ROC, and LFOC.

  11. Single Shot Measurements of the 4-Dimensional Transverse Phase Space Distribution of Intense Ion Beams at the UNILAC at GSI

    CERN Document Server

    Groening, L

    2003-01-01

    The UNILAC is used as an injector for the synchrotron SIS. It is designed to fill the synchrotron up to its space charge limit. The upper limit for the useful beam emittance of the UNILAC is given by the finite acceptance of the SIS during the injection process. In order to remain within this acceptance the emittance growth during beam acceleration and transportation due to space charge effects must be minimized by applying an appropriate beam focusing. Therefore, the influence of the magnetic focusing strength on the beam emittance growth was investigated experimentally for different beam currents. Measurements of transverse phase space distributions were performed before and after the Alvarez accelerator with a periodic focusing channel, respectively. In order to perform such a wide parameter scan within a reasonable time with respect to machine stability, the pepper pot technique was applied. The pepper pot method allows for single-pulse measurements. For comparison several measurements using the slit-grid...

  12. Distribution of HBV subgenotypes in Ribeirão Preto, Southeastern Brazil: a region with history of intense Italian immigration.

    Science.gov (United States)

    Chachá, Silvana Gama Florencio; Gomes-Gouvêa, Michele Soares; Malta, Fernanda de Mello; Ferreira, Sandro da Costa; Villanova, Márcia Guimarães; Souza, Fernanda Fernandes; Teixeira, Andreza Correa; Passos, Afonso Dinis da Costa; Pinho, João Renato Rebello; Martinelli, Ana de Lourdes Candolo

    Hepatitis B virus (HBV) is distributed worldwide, with geographical variations regarding prevalence of the different genotypes. The aim of this study was to determine the HBV genotypes and subgenotypes circulating in Southeast Brazil and compare the genetic sequences found with HBV sequences previously described in the world. Sequences from 166 chronic HBV carriers were analyzed using the fragment constituted by 1306 base pairs comprising surface and polymerase regions of the HBV genome. The sequences obtained were submitted to phylogenetic analysis. HBV subgenotypes A1, A2, D1-D4, F2a, and F4 were found. HBV genotype D was the most frequent, found in 99 patients (58.4%). Within this group, subgenotype D3 was the most prevalent, in 73 patients (42.9%). HBV genotype A was identified in 58 (36%) patients, subgenotype A1, in 48 (29.8%) subjects. Genotype F was identified in 9 (5.4%). According to the phylogenetic analysis, the sequences found were grouped with sequences from Europe, Asia and Middle East (subgenotypes D1, D2, D3) and sequences from Latin America and Africa (subgenotype A1). HBV D3 grouped in different clusters inside D3 clade, several of them with sequences isolated in Italy. We also identified eight families whose relatives were infected with the same HBV subgenotype, most with high similarity between sequences. In conclusion, the distribution of the HBV sequences obtained interweaved with sequences from other continents, corresponding to regions from where many immigrants came to this region, in accordance to the hypothesis that the HBV detected over there were brought during the colonization times. Copyright © 2017 Sociedade Brasileira de Infectologia. Published by Elsevier Editora Ltda. All rights reserved.

  13. Distribution of HBV subgenotypes in Ribeirão Preto, Southeastern Brazil: a region with history of intense Italian immigration

    Directory of Open Access Journals (Sweden)

    Silvana Gama Florencio Chachá

    2017-07-01

    Full Text Available Hepatitis B virus (HBV is distributed worldwide, with geographical variations regarding prevalence of the different genotypes. The aim of this study was to determine the HBV genotypes and subgenotypes circulating in Southeast Brazil and compare the genetic sequences found with HBV sequences previously described in the world. Sequences from 166 chronic HBV carriers were analyzed using the fragment constituted by 1306 base pairs comprising surface and polymerase regions of the HBV genome. The sequences obtained were submitted to phylogenetic analysis. HBV subgenotypes A1, A2, D1-D4, F2a, and F4 were found. HBV genotype D was the most frequent, found in 99 patients (58.4%. Within this group, subgenotype D3 was the most prevalent, in 73 patients (42.9%. HBV genotype A was identified in 58 (36% patients, subgenotype A1, in 48 (29.8% subjects. Genotype F was identified in 9 (5.4%. According to the phylogenetic analysis, the sequences found were grouped with sequences from Europe, Asia and Middle East (subgenotypes D1, D2, D3 and sequences from Latin America and Africa (subgenotype A1. HBV D3 grouped in different clusters inside D3 clade, several of them with sequences isolated in Italy. We also identified eight families whose relatives were infected with the same HBV subgenotype, most with high similarity between sequences. In conclusion, the distribution of the HBV sequences obtained interweaved with sequences from other continents, corresponding to regions from where many immigrants came to this region, in accordance to the hypothesis that the HBV detected over there were brought during the colonization times.

  14. Vibrational and electronic spectroscopic studies of melatonin

    Science.gov (United States)

    Singh, Gurpreet; Abbas, J. M.; Dogra, Sukh Dev; Sachdeva, Ritika; Rai, Bimal; Tripathi, S. K.; Prakash, Satya; Sathe, Vasant; Saini, G. S. S.

    2014-01-01

    We report the infrared absorption and Raman spectra of melatonin recorded with 488 and 632.8 nm excitations in 3600-2700 and 1700-70 cm-1 regions. Further, we optimized molecular structure of the three conformers of melatonin within density functional theory calculations. Vibrational frequencies of all three conformers have also been calculated. Observed vibrational bands have been assigned to different vibrational motions of the molecules on the basis of potential energy distribution calculations and calculated vibrational frequencies. Observed band positions match well with the calculated values after scaling except Nsbnd H stretching mode frequencies. It is found that the observed and calculated frequencies mismatch of Nsbnd H stretching is due to intermolecular interactions between melatonin molecules.

  15. Vibrational and Rotational Energy Relaxation in Liquids

    DEFF Research Database (Denmark)

    Petersen, Jakob

    Vibrational and rotational energy relaxation in liquids are studied by means of computer simulations. As a precursor for studying vibrational energy relaxation of a solute molecule subsequent to the formation of a chemical bond, the validity of the classical Bersohn-Zewail model for describing......, the vibrational energy relaxation of I2 subsequent to photodissociation and recombination in CCl4 is studied using classical Molecular Dynamics simulations. The vibrational relaxation times and the time-dependent I-I pair distribution function are compared to new experimental results, and a qualitative agreement...... the intramolecular dynamics during photodissociation is investigated. The apparent agreement with quantum mechanical calculations is shown to be in contrast to the applicability of the individual approximations used in deriving the model from a quantum mechanical treatment. In the spirit of the Bersohn-Zewail model...

  16. Hubungan Phantom Vibration Syndrome Terhadap Sleep Disorder dan Kondisi Stress

    OpenAIRE

    Ajeng Yeni Setianingrum

    2017-01-01

    Phantom vibration syndrome is a condition where a person would feel the sensation of vibration of a cell phone as if there were incoming notification but the fact is not. This research investigated the relationship between phantom vibration syndromes, sleep disorder and stress condition. Questionnaires were distributed to 120 participants with age range 18 to 23 years old. Data of participants showed that all of participants using a smart mobile phone and 24% of them have more than one cell p...

  17. Role of Micro-Topographic Variability on the Distribution of Inorganic Soil-Nitrogen Age in Intensively Managed Landscape

    Science.gov (United States)

    Woo, Dong K.; Kumar, Praveen

    2017-10-01

    How does the variability of topography structure the spatial heterogeneity of nutrient dynamics? In particular, what role does micro-topographic depression play in the spatial and temporal dynamics of nitrate, ammonia, and ammonium? We explore these questions using the 3-D simulation of their joint dynamics of concentration and age. To explicitly resolve micro-topographic variability and its control on moisture, vegetation, and carbon-nitrogen dynamics, we use a high-resolution LiDAR data over an agricultural site under a corn-soybean rotation in the Intensively Managed landscapes Critical Zone Observatory in the U.S. Midwest. We utilize a hybrid CPU-GPU parallel computing architecture to reduce the computational cost associated with such high-resolution simulations. Our results show that in areas that present closed topographic depressions, relatively lower nitrate concentration and age are observed compared to elsewhere. The periodic ponding in depressions increases the downward flux of water that carries more dissolved nitrate to the deeper soil layer. However, the variability in the depressions is relatively higher as a result of the episodic ponding pattern. When aggregate efflux from the soil domain at the bottom of the soil is considered, we find a gradual decrease in the age on the rising limb of nitrate efflux and a gradual increase on the falling limb. In addition, the age of the nitrate efflux ranges from 4 to 7 years. These are significantly higher as compared to the ages associated with a nonreactive tracer indicating that they provide an inaccurate estimate of residence time of a reactive constituent through the soil column.

  18. Vibration of imperfect rotating disk

    Directory of Open Access Journals (Sweden)

    Půst L.

    2011-12-01

    Full Text Available This study is concerned with the theoretical and numerical calculations of the flexural vibrations of a bladed disk. The main focus of this study is to elaborate the basic background for diagnostic and identification methods for ascertaining the main properties of the real structure or an experimental model of turbine disks. The reduction of undesirable vibrations of blades is proposed by using damping heads, which on the experimental model of turbine disk are applied only on a limited number of blades. This partial setting of damping heads introduces imperfection in mass, stiffness and damping distribution on the periphery and leads to more complicated dynamic properties than those of a perfect disk. Calculation of FEM model and analytic—numerical solution of disk behaviour in the limited (two modes frequency range shows the splitting of resonance with an increasing speed of disk rotation. The spectrum of resonance is twice denser than that of a perfect disk.

  19. Package security recorder of vibration

    Science.gov (United States)

    Wang, Xiao-na; Hu, Jin-liang; Song, Shi-de

    2013-08-01

    This paper introduces a new kind of electronic product — Package Security Recorder of Vibration. It utilizes STC89C54RD+ LQFP-44 MCU as its main controller. At the same time, it also utilizes Freescale MMA845A 3-Axis 8-bit/12-bit Digital Accelerometer and Maxim DS1302 Trickle Charge Timekeeping Chip. It utilizes the MCU to read the value of the accelerometer and the value of the timekeeping chip, and records the data into the inner E2PROM of MCU. The whole device achieves measuring, reading and recording the time of the vibration and the intensity of the vibration. When we need the data, we can read them out. The data can be used in analyzing the condition of the cargo when it transported. The device can be applied to monitor the security of package. It solves the problem of responsibility affirming, when the valuable cargo are damaged while it transported. It offers powerful safeguard for the package. It's very value for application.

  20. The response of a simulated mesoscale convective system to increased aerosol pollution: Part I: Precipitation intensity, distribution, and efficiency

    Science.gov (United States)

    Clavner, Michal; Cotton, William R.; van den Heever, Susan C.; Saleeby, Stephen M.; Pierce, Jeffery R.

    2018-01-01

    Mesoscale Convective Systems (MCSs) are important contributors to rainfall in the High Plains of the United States and elsewhere in the world. It is therefore of interest to understand how different aerosols serving as cloud condensation nuclei (CCN) may impact the total amount, rates and spatial distribution of precipitation produced by MCSs. In this study, different aerosol concentrations and their effects on precipitation produced by an MCS are examined by simulating the 8 May 2009 "Super-Derecho" MCS using the Regional Atmospheric Modeling System (RAMS), a cloud-resolving model (CRM) with sophisticated aerosol and microphysical parameterizations. Three simulations were conducted that differed only in the initial concentration, spatial distribution, and chemical composition of aerosols. Aerosol fields were derived from the output of GEOS-Chem, a 3D chemical transport numerical model. Results from the RAMS simulations show that the total domain precipitation was not significantly affected by variations in aerosol concentrations, however, the pollution aerosols altered the precipitation characteristics. The more polluted simulations exhibited higher precipitation rates, higher bulk precipitation efficiency, a larger area with heavier precipitation, and a smaller area with lighter precipitation. These differences arose as a result of aerosols enhancing precipitation in the convective region of the MCS while suppressing precipitation from the MCS's stratiform-anvil. In the convective region, several processes likely contributed to an increase of precipitation. First, owing to the very humid environment of this storm, the enhanced amount of cloud water available to be collected overwhelmed the reduction in precipitation efficiency associated with the aerosol-induced production of smaller droplets which led to a net increase in the conversion of cloud droplets to precipitation. Second, higher aerosol concentrations led to invigoration of convective updrafts which

  1. Evolution of microstructure and residual stress under various vibration modes in 304 stainless steel welds.

    Science.gov (United States)

    Hsieh, Chih-Chun; Wang, Peng-Shuen; Wang, Jia-Siang; Wu, Weite

    2014-01-01

    Simultaneous vibration welding of 304 stainless steel was carried out with an eccentric circulating vibrator and a magnetic telescopic vibrator at subresonant (362 Hz and 59.3 Hz) and resonant (376 Hz and 60.9 Hz) frequencies. The experimental results indicate that the temperature gradient can be increased, accelerating nucleation and causing grain refinement during this process. During simultaneous vibration welding primary δ -ferrite can be refined and the morphologies of retained δ-ferrite become discontinuous so that δ-ferrite contents decrease. The smallest content of δ-ferrite (5.5%) occurred using the eccentric circulating vibrator. The diffraction intensities decreased and the FWHM widened with both vibration and no vibration. A residual stress can obviously be increased, producing an excellent effect on stress relief at a resonant frequency. The stress relief effect with an eccentric circulating vibrator was better than that obtained using a magnetic telescopic vibrator.

  2. Inferring changes in water cycle dynamics of intensively managed landscapes via the theory of time-variant travel time distributions

    Science.gov (United States)

    Danesh-Yazdi, Mohammad; Foufoula-Georgiou, Efi; Karwan, Diana L.; Botter, Gianluca

    2016-10-01

    Climatic trends and anthropogenic changes in land cover and land use are impacting the hydrology and water quality of streams at the field, watershed, and regional scales in complex ways. In poorly drained agricultural landscapes, subsurface drainage systems have been successful in increasing crop productivity by removing excess soil moisture. However, their hydroecological consequences are still debated in view of the observed increased concentrations of nitrate, phosphorus, and pesticides in many streams, as well as altered runoff volumes and timing. In this study, we employ the recently developed theory of time-variant travel time distributions within the StorAge Selection function framework to quantify changes in water cycle dynamics resulting from the combined climate and land use changes. Our results from analysis of a subbasin in the Minnesota River Basin indicate a significant decrease in the mean travel time of water in the shallow subsurface layer during the growing season under current conditions compared to the pre-1970s conditions. We also find highly damped year-to-year fluctuations in the mean travel time, which we attribute to the "homogenization" of the hydrologic response due to artificial drainage. The dependence of the mean travel time on the spatial heterogeneity of some soil characteristics as well as on the basin scale is further explored via numerical experiments. Simulations indicate that the mean travel time is independent of scale for spatial scales larger than approximately 200 km2, suggesting that hydrologic data from larger basins may be used to infer the average of smaller-scale-driven changes in water cycle dynamics.

  3. 2-Bromohydroquinone: structures, vibrational assignments and RHF, B- and B3-based density functional calculations.

    Science.gov (United States)

    Ramoji, Anuradha; Yenagi, Jayashree; Tonannavar, J

    2008-03-01

    Vibrational spectral measurements, namely, infrared (4000-400 cm(-1)) and Raman (3500-50 cm(-1)) spectra have been made for 2-Bromohydroquinone. Optimized geometrical structures, harmonic vibrational frequencies and intensities have been computed by the ab initio (RHF), B-based (BLYP, BP86) and B3-based (B3P86, B3LYP, B3PW91) density functional methods using 6-31G(d) basis set. A complete assignment of the observed spectra has been proposed. Coupling of vibrations has been determined by calculating potential energy distributions (PEDs) at BP86/6-31G(d) level of theory. In the computed equilibrium geometries by all the levels, the bond lengths and bond angles show changes in the neighborhood of Bromine. Similarly, the vibrational spectra exhibit some marked spectral features unlike in hydroquinone and phenol. On the other hand, the infrared spectrum shows a clear evidence of O-H...O bonding near 3200 cm(-1) as in hydroquinone. Evaluation of the theoretical methods demonstrates that all the levels but the RHF have reproduced frequencies fairly accurately in the 2000-500 cm(-1); below 500 cm(-1) the RHF has performed reasonably well.

  4. Development of Non-Conservative Joints in Beam Networks for Vibration Energy Flow Analysis

    Directory of Open Access Journals (Sweden)

    Jee-Hun Song

    2007-01-01

    Full Text Available Our work aims to find a general solution for the vibrational energy flow through a plane network of beams on the basis of an energy flow analysis. A joint between two semi-infinite beams are modeled by three sets of springs and dashpots. Thus, the results can incorporate the case of complaint and non-conservative in all the three degrees of freedom. In the cases of finite coupled structures connected at a certain angle, the derived non-conservative joints and developed wave energy equation were applied. The joint properties, the frequency, the coupling angle, and the internal loss factor were changed to evaluate the proposed methods for predicting medium-to-high frequency vibrational energy and intensity distributions.

  5. Model Indepedent Vibration Control

    OpenAIRE

    Yuan, Jing

    2010-01-01

    A NMIFC system is proposed for broadband vibration control. It has two important features. Feature F1 is that the NMIFC is stable without introducing any invasive effects, such as probing signals or controller perturbations, into the vibration system; feature F2 is

  6. Vibration Theory, Vol. 3

    DEFF Research Database (Denmark)

    Nielsen, Søren R. K.

    The present textbook has been written based on previous lecture notes for a course on stochastic vibration theory that is being given on the 9th semester at Aalborg University for M. Sc. students in structural engineering. The present 4th edition of this textbook on linear stochastic vibration...

  7. Vibration Theory, Vol. 3

    DEFF Research Database (Denmark)

    Nielsen, Søren R. K.

    The present textbook has been written based on previous lecture notes for a course on stochastic vibration theory that is being given on the 9th semester at Aalborg University for M. Sc. students in structural engineering. The present 2nd edition of this textbook on linear stochastic vibration...

  8. Hydroelastic Vibrations of Ships

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Folsø, Rasmus

    2002-01-01

    A formula for the necessary hull girder bending stiffness required to avoid serious springing vibrations is derived. The expression takes into account the zero crossing period of the waves, the ship speed and main dimensions. For whipping vibrations the probability of exceedance for the combined...

  9. Gearbox vibration diagnostic analyzer

    Science.gov (United States)

    1992-01-01

    This report describes the Gearbox Vibration Diagnostic Analyzer installed in the NASA Lewis Research Center's 500 HP Helicopter Transmission Test Stand to monitor gearbox testing. The vibration of the gearbox is analyzed using diagnostic algorithms to calculate a parameter indicating damaged components.

  10. Mechanical vibration and shock analysis, sinusoidal vibration

    CERN Document Server

    Lalanne, Christian

    2014-01-01

    Everything engineers need to know about mechanical vibration and shock...in one authoritative reference work! This fully updated and revised 3rd edition addresses the entire field of mechanical vibration and shock as one of the most important types of load and stress applied to structures, machines and components in the real world. Examples include everything from the regular and predictable loads applied to turbines, motors or helicopters by the spinning of their constituent parts to the ability of buildings to withstand damage from wind loads or explosions, and the need for cars to m

  11. SU-F-T-397: Evaluating the Impact of Bladder Filling Status for the Organs at Risk Dose Distribution in Cervical Cancer Patients with Intensity Modulated Radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, JY [Cancer Hospital of Shantou University Medical College, Shantou, Guangdong (China); Hong, DL [The First Affiliated Hospital of Shantou University Medical College, Shantou, Guangdong (China)

    2016-06-15

    Purpose: To investigate the impact of bladder filling status of the organs at risk (OARs) on dose distribution during intensity modulated radiotherapy (IMRT) for cervical cancer patients. Methods: Twelve cervical cancer patients treated with IMRT were selected for this study. The prescription dose was 45Gy/25 fractions with the 6 MV photon beam. All patients performed two CT scans, one with an empty bladder, the other one with bladder filled. For the registration of two CT scans, the fusion was automatically carried out upon the bony anatomy. The OARs (bladder, rectum, pelvic bone and small intestine) were delineated to planning CT to evaluate the dose distributions. These dose distributions were compared between empty bladder and bladder filling. Results: The bladder volume with empty bladder and bladder filling was 403.2±124.13cc and 101.4±87.5cc, respectively. There were no statistical differences between empty bladder and bladder filling in the mean value of pelvic bone V10Gy, V20Gy, V40Gy; rectum V40Gy and V45Gy. The bladder V40Gy and V45Gy were lower in the bladder filling group than in the empty bladder group (63.7%±5.8% vs 87.5%±7.8%, 45.1%±9.5% vs 62.4%±11.8%, respectively). The V45Gy for small intestine in the bladder filling group was significantly less than the empty bladder group (146.7cc±95.3cc vs 245.7cc±101.8cc). Conclusion: Our study finds that the bladder filling status did not have a significant impact on dose distribution in the rectum and pelvic bone. However, the changes of bladder filling have a large impact on bladder and small intestine doses. A full bladder is strongly recommended during treatment for cervical cancer patients.

  12. Axial intensity distribution analysis for a depth-of-field-extended optical system using a low-frequency binary phase mask.

    Science.gov (United States)

    Zhao, Tingyu; Liu, Aiping; Liu, Qinxiao; Yu, Feihong

    2014-06-10

    This paper theoretically analyzes the axial intensity distribution of an optical imaging system with a low-frequency binary phase mask. Based on the derivation, a novel but simple one-step phase mask is designed to extend the depth of field. A comparison is made between the novel phase mask and the one designed in previous research [Opt. Express14, 2631 (2006)]. Both masks are numerically tested in an achromatic doublet system. The numerical results show that two phase masks have comparable performance in depth of field extension. However, the phase mask designed in this paper has a simpler structure because it has only one step while the previous one has two. Consequently, the easy fabrication of the novel phase mask leads to cost reduction. This novel low-frequency binary phase mask provides a new choice to design depth-of-field-extended optical systems without digital image processing.

  13. The Distribution of the Informative Intensity of the Text in Terms of its Structure (On Materials of the English Texts in the Mining Sphere)

    Science.gov (United States)

    Znikina, Ludmila; Rozhneva, Elena

    2017-11-01

    The article deals with the distribution of informative intensity of the English-language scientific text based on its structural features contributing to the process of formalization of the scientific text and the preservation of the adequacy of the text with derived semantic information in relation to the primary. Discourse analysis is built on specific compositional and meaningful examples of scientific texts taken from the mining field. It also analyzes the adequacy of the translation of foreign texts into another language, the relationships between elements of linguistic systems, the degree of a formal conformance, translation with the specific objectives and information needs of the recipient. Some key words and ideas are emphasized in the paragraphs of the English-language mining scientific texts. The article gives the characteristic features of the structure of paragraphs of technical text and examples of constructions in English scientific texts based on a mining theme with the aim to explain the possible ways of their adequate translation.

  14. Optimization of orders in multichannel fractional Fourier-domain filtering circuits and its application to the synthesis of mutual-intensity distributions.

    Science.gov (United States)

    Yetik, Imam Samil; Kutay, Mehmet Alper; Ozaktas, Haldun Memduh

    2002-07-10

    Owing to the nonlinear nature of the problem, the transform orders in fractional Fourier-domain filtering configurations have usually not been optimized but chosen uniformly. We discuss the optimization of these orders for multi-channel-filtering configurations by first finding the optimal filter coefficients for a larger number of uniformly chosen orders, and then maintaining the most important ones. The method is illustrated with the problem of synthesizing desired mutual-intensity distributions. The method we propose allows those fractional Fourier domains, which add little benefit to the filtering process but increase the overall cost, to be pruned, so that comparable performance can be attained with less cost, or higher performance can be obtained with the same cost. The method we propose is more likely to be useful when confronted with low-cost rather than high-performance applications, because larger improvements are obtained when the use of a smaller number of filters is desired.

  15. Angle-resolved intensity and energy distributions of positive and negative hydrogen ions released from tungsten surface by molecular hydrogen ion impact

    Energy Technology Data Exchange (ETDEWEB)

    Kato, S., E-mail: eun1302@mail4.doshsha.ac.jp [Doshisha University, Kyotanabe, Kyoto 610-0321 (Japan); Tanaka, N. [Institute of Laser Engineering, Osaka University, Suita, Osaka 565-0871 (Japan); Sasao, M. [Doshisha University, Kyotanabe, Kyoto 610-0321 (Japan); Kisaki, M.; Tsumori, K. [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Nishiura, M. [University of Tokyo, Kashiwa, Chiba 277-8568 (Japan); Matsumoto, Y. [Tokushima Bunri University, Yamashiro, Tokushima 770-8514 (Japan); Kenmotsu, T.; Wada, M. [Doshisha University, Kyotanabe, Kyoto 610-0321 (Japan); Yamaoka, H. [RIKEN SPring-8 Center, Sayo, Hyogo 679-5148 (Japan)

    2015-08-15

    Hydrogen ion reflection properties have been investigated following the injection of H{sup +}, H{sub 2}{sup +} and H{sub 3}{sup +} ions onto a polycrystalline W surface. Angle- and energy-resolved intensity distributions of both scattered H{sup +} and H{sup −} ions are measured by a magnetic momentum analyzer. We have detected atomic hydrogen ions reflected from the surface, while molecular hydrogen ions are unobserved within our detection limit. The reflected hydrogen ion energy is approximately less than one-third of the incident beam energy for H{sub 3}{sup +} ion injection and less than a half of that for H{sub 2}{sup +} ion injection. Other reflection properties are very similar to those of monoatomic H{sup +} ion injection. Experimental results are compared to the classical trajectory simulations using the ACAT code based on the binary collision approximation.

  16. Tailoring Ion Charge State Distribution in Tetramethyltin Clusters under Influence of Moderate Intensity Picosecond Laser Pulse: Role of Laser Wavelength and Rate of Energy Deposition

    Science.gov (United States)

    Sharma, Pramod; Das, Soumitra; Vatsa, Rajesh K.

    2017-07-01

    Systematic manipulation of ionic-outcome in laser-cluster interaction process has been realized for studies carried out on tetramethyltin (TMT) clusters under picosecond laser conditions, determined by choice of laser wavelength and intensity. As a function of laser intensity, TMT clusters exhibit gradual enhancement in overall ionization of its cluster constituents, up to a saturation level of ionization, which was distinct for different wavelengths (266, 355, and 532 nm). Simultaneously, systematic appearance of higher multiply charged atomic ions and shift in relative abundance of multiply charged atomic ions towards higher charge state was observed, using time-of-flight mass spectrometer. At saturation level, multiply charged atomic ions up to (C2+, Sn2+) at 266 nm, (C4+, Sn4+) at 355 nm, and (C4+, Sn6+) at 532 nm were detected. In addition, at 355 nm intra-cluster ion chemistry within the ionized cluster leads to generation of molecular hydrogen ion (H2 +) and triatomic molecular hydrogen ion (H3 +). Generation of multiply charged atomic ions is ascribed to efficient coupling of laser pulse with the cluster media, facilitated by inner-ionized electrons produced within the cluster, at the leading edge of laser pulse. Role of inner-ionized electrons is authenticated by measuring kinetic energy distribution of electrons liberated upon disintegration of excessively ionized cluster, under the influence of picosecond laser pulse.

  17. Damping Transversal Vibrations of the Offset Cylinder of the Offset Press

    Directory of Open Access Journals (Sweden)

    Eglė Šalvienė

    2012-01-01

    Full Text Available Investigation into the influence of a dynamic vibration damper on the intensity of the absolute forced transversal vibrations of the blanket cylinder of the web printing offset press was performed. The analytical and numerical examination of the dynamic model of the cylinder was done. The obtained results have disclosed that the application of the damper decreases the intensity of printing cylinder vibrations.Article in Lithuanian

  18. Vibrations of rotating machinery

    CERN Document Server

    Matsushita, Osami; Kanki, Hiroshi; Kobayashi, Masao; Keogh, Patrick

    2017-01-01

    This book opens with an explanation of the vibrations of a single degree-of-freedom (dof) system for all beginners. Subsequently, vibration analysis of multi-dof systems is explained by modal analysis. Mode synthesis modeling is then introduced for system reduction, which aids understanding in a simplified manner of how complicated rotors behave. Rotor balancing techniques are offered for rigid and flexible rotors through several examples. Consideration of gyroscopic influences on the rotordynamics is then provided and vibration evaluation of a rotor-bearing system is emphasized in terms of forward and backward whirl rotor motions through eigenvalue (natural frequency and damping ratio) analysis. In addition to these rotordynamics concerning rotating shaft vibration measured in a stationary reference frame, blade vibrations are analyzed with Coriolis forces expressed in a rotating reference frame. Other phenomena that may be assessed in stationary and rotating reference frames include stability characteristic...

  19. Vibration-rotation alchemy in acetylene (12C2H2), ? at low vibrational excitation: from high resolution spectroscopy to fast intramolecular dynamics

    Science.gov (United States)

    Perry, David S.; Miller, Anthony; Amyay, Badr; Fayt, André; Herman, Michel

    2010-04-01

    The link between energy-resolved spectra and time-resolved dynamics is explored quantitatively for acetylene (12C2H2), ? with up to 8600 cm-1 of vibrational energy. This comparison is based on the extensive and reliable knowledge of the vibration-rotation energy levels and on the model Hamiltonian used to fit them to high precision [B. Amyay, S. Robert, M. Herman, A. Fayt, B. Raghavendra, A. Moudens, J. Thiévin, B. Rowe, and R. Georges, J. Chem. Phys. 131, 114301 (2009)]. Simulated intensity borrowing features in high resolution absorption spectra and predicted survival probabilities in intramolecular vibrational redistribution (IVR) are first investigated for the v 4 + v 5 and v 3 bright states, for J = 2, 30 and 100. The dependence of the results on the rotational quantum number and on the choice of vibrational bright state reflects the interplay of three kinds of off-diagonal resonances: anharmonic, rotational l-type, and Coriolis. The dynamical quantities used to characterize the calculated time-dependent dynamics are the dilution factor φ d, the IVR lifetime τ IVR , and the recurrence time τ rec. For the two bright states v 3 + 2v 4 and 7v 4, the collisionless dynamics for thermally averaged rotational distributions at T = 27, 270 and 500 K were calculated from the available spectroscopic data. For the 7v 4 bright state, an apparent irreversible decay of is found. In all cases, the model Hamiltonian allows a detailed calculation of the energy flow among all of the coupled zeroth-order vibration-rotation states.

  20. Direct observation of a transverse vibrational mechanism for negative thermal expansion in Zn(CN)2: an atomic pair distribution function analysis.

    Science.gov (United States)

    Chapman, Karena W; Chupas, Peter J; Kepert, Cameron J

    2005-11-09

    The instantaneous structure of the cyanide-bridged negative thermal expansion (NTE) material Zn(CN)(2) has been probed using atomic pair distribution function (PDF) analysis of high energy X-ray scattering data (100-400 K). The temperature dependence of the atomic separations extracted from the PDFs indicates an increase of the average transverse displacement of the cyanide bridge from the line connecting the Zn(II) centers with increasing temperature. This allows the contraction of non-nearest-neighbor Zn...Zn' and Zn...C/N distances despite the observed expansion of the individual direct Zn-C/N and C-N bonds. Thus, this analysis provides definitive structural confirmation that an increase in the average displacement of bridging atoms is the origin of the NTE behavior. The lattice parameters reveal a slight reduction in the NTE behavior at high temperature from a minimum coefficient of thermal expansion (alpha = dl/ldT) of -19.8 x 10(-6) K(-1) below 180 K, which is attributed to interaction between the doubly interpenetrated frameworks that comprise the structure.

  1. Temporal changes in distribution, prevalence and intensity of northern fowl mite (Ornithonyssus sylviarum) parasitism in commercial caged laying hens, with a comprehensive economic analysis of parasite impact.

    Science.gov (United States)

    Mullens, Bradley A; Owen, Jeb P; Kuney, Douglas R; Szijj, Coralie E; Klingler, Kimberly A

    2009-03-09

    Establishment and spread of Ornithonyssus sylviarum were documented through time on sentinel hens (50 per house of 28,000-30,000 hens) in the first egg production cycle of three large commercial flocks (12 houses) of white leghorn hens. Mites were controlled using acaricide, and the impacts of treatment on mite populations and economic performance were documented. Mite prevalence and intensity increased rapidly and in tandem for 4-8 weeks after infestation. Intensity declined due to immune system involvement, but prevalence remained high, and this would affect mite sampling plan use and development. Early treatment was more effective at controlling mites; 85% of light infestations were eliminated by a pesticide spray (Ravap), versus 24% of heavy infestations. Hens infested later developed lower peak mite intensities, and those mite populations declined more quickly than on hens infested earlier in life. Raw spatial association by distance indices (SADIE), incorporating both the intensity and distribution of mites within a house, were high from week-to-week within a hen house. Once adjusted spatially to reflect variable hen cohorts becoming infested asynchronously, this analysis showed the association index tended to rebound at intervals of 5-6 weeks after the hen immune system first suppressed them. Large, consistent mite differences in one flock (high vs. low infestation levels) showed the economic damage of mite parasitism (assessed by flock indexing) was very high in the initial stages of mite expansion. Unmitigated infestations overall reduced egg production (2.1-4.0%), individual egg weights (0.5-2.2%), and feed conversion efficiency (5.7%), causing a profit reduction of $0.07-0.10 per hen for a 10-week period. Asynchronous infestation patterns among pesticide-treated hens may have contributed to a lack of apparent flock-level economic effects later in the production cycle. Individual egg weights differed with mite loads periodically, but could be either

  2. Spatial distribution and implications to sources of halogenated flame retardants in riverine sediments of Taizhou, an intense e-waste recycling area in eastern China.

    Science.gov (United States)

    Zhou, Shanshan; Fu, Jie; He, Huan; Fu, Jianjie; Tang, Qiaozhi; Dong, Minfeng; Pan, Yongqiang; Li, An; Liu, Weiping; Zhang, Limin

    2017-10-01

    Concentrations and spatial distribution pattern of organohalogen flame retardants were investigated in the riverine surface sediments from Taizhou, an intensive e-waste recycling region in China. The analytes were syn- and anti- Dechlorane Plus (DP), Dechloranes 602, 603, and 604, a DP monoadduct, two dechlorinated DPs and 8 congeners of polybrominated diphenyl ethers (PBDEs). The concentrations of Σ 8 PBDEs, ΣDP, ΣDec600s, and ΣDP-degradates ranged from recycling facilities. Such patterns were largely shared by Dec602 and dechlorinated DP, although their concentration levels were much lower. These major flame retardants significantly correlate with each other, and cluster together in the loading plot of principle component analysis. In contrast, most non-deca PBDE congeners do not correlate with DPs. Dec604 stood out having distinctly different spatial distribution pattern, which could be linked to historical use of mirex. Organic matter content of the sediment was not the dominant factor in determining the spatial pattern of pollution by halogenated flame retardants in the rivers of this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Modelos da distribuição temporal de chuvas intensas em Piracicaba, SP Time distribution models of intense rainfall in Piracicaba, SP, Brazil

    Directory of Open Access Journals (Sweden)

    Décio E. Cruciani

    2002-04-01

    Full Text Available O estudo da variação temporal de chuvas intensas é de grande importância na hidrologia, para a análise e previsão de eventos extremos, necessárias em projetos de controle de engenharia. Com esse objetivo, foram analisados dados de pluviogramas da cidade de Piracicaba, SP, do período de 1966 a 2000, para se determinar a distribuição temporal de chuvas intensas de 60 e de 120 min de duração. As chuvas de 60 min foram subdivididas em três intervalos iguais e sucessivos de 20 min cada um, enquanto as chuvas de 120 min foram subdivididas em quatro intervalos iguais e sucessivos de 30 min cada um. O modelo de distribuição da precipitação que predominou para as chuvas de 60 e 120 min, foi do tipo exponencial negativo, com 85,7 e 50,7% dos casos, respectivamente. Para as chuvas de 60 min, com altura pluviométrica média de 20,7 mm, a distribuição foi de 72,3, 21,4 e 6,2% do total precipitado, respectivamente, nos três intervalos sucessivos de 20 min. Para as chuvas de 120 min, com altura pluviométrica média de 33,3 mm, o resultado foi de 60,1, 25,2, 11,1 e 3,6%, respectivamente, nos quatro intervalos sucessivos de 30 min. O modelo de distribuição temporal dessas chuvas não foi modificado pelo total precipitado nem pela sua duração, nos intervalos em questão.Time distribution models of intense and short rains are very important in hydrology and for extreme predictions in engineering projects. With this purpose, rain data of Piracicaba, SP, Brazil, from 1966 to 2000 were analyzed to establish time distribution models of 60 and 120 min intense rains, during the rainy season from October through March. Time distribution models were assessed by three intervals of twenty minutes duration, for 60 min rains and by four intervals of thirty minutes duration for 120 min rains. The prevailing precipitation model for both, 60 and 120 min rains was a negative exponential distribution, in 85.7 and 50.7% of cases, respectively. For 60 min

  4. Simulation of future groundwater recharge using a climate model ensemble and SAR-image based soil parameter distributions - A case study in an intensively-used Mediterranean catchment.

    Science.gov (United States)

    Herrmann, Frank; Baghdadi, Nicolas; Blaschek, Michael; Deidda, Roberto; Duttmann, Rainer; La Jeunesse, Isabelle; Sellami, Haykel; Vereecken, Harry; Wendland, Frank

    2016-02-01

    We used observed climate data, an ensemble of four GCM-RCM combinations (global and regional climate models) and the water balance model mGROWA to estimate present and future groundwater recharge for the intensively-used Thau lagoon catchment in southern France. In addition to a highly resolved soil map, soil moisture distributions obtained from SAR-images (Synthetic Aperture Radar) were used to derive the spatial distribution of soil parameters covering the full simulation domain. Doing so helped us to assess the impact of different soil parameter sources on the modelled groundwater recharge levels. Groundwater recharge was simulated in monthly time steps using the ensemble approach and analysed in its spatial and temporal variability. The soil parameters originating from both sources led to very similar groundwater recharge rates, proving that soil parameters derived from SAR images may replace traditionally used soil maps in regions where soil maps are sparse or missing. Additionally, we showed that the variance in different GCM-RCMs influences the projected magnitude of future groundwater recharge change significantly more than the variance in the soil parameter distributions derived from the two different sources. For the period between 1950 and 2100, climate change impacts based on the climate model ensemble indicated that overall groundwater recharge will possibly show a low to moderate decrease in the Thau catchment. However, as no clear trend resulted from the ensemble simulations, reliable recommendations for adapting the regional groundwater management to changed available groundwater volumes could not be derived. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Probability of Failure in Random Vibration

    DEFF Research Database (Denmark)

    Nielsen, Søren R.K.; Sørensen, John Dalsgaard

    1988-01-01

    Close approximations to the first-passage probability of failure in random vibration can be obtained by integral equation methods. A simple relation exists between the first-passage probability density function and the distribution function for the time interval spent below a barrier before out...

  6. Structural Stability and Vibration

    DEFF Research Database (Denmark)

    Wiggers, Sine Leergaard; Pedersen, Pauli

    This book offers an integrated introduction to the topic of stability and vibration. Strikingly, it describes stability as a function of boundary conditions and eigenfrequency as a function of both boundary conditions and column force. Based on a post graduate course held by the author at the Uni......This book offers an integrated introduction to the topic of stability and vibration. Strikingly, it describes stability as a function of boundary conditions and eigenfrequency as a function of both boundary conditions and column force. Based on a post graduate course held by the author...... and their derivation, thus stimulating them to write interactive and dynamic programs to analyze instability and vibrational modes....

  7. Vibration Analysis and the Accelerometer

    Science.gov (United States)

    Hammer, Paul

    2011-01-01

    Have you ever put your hand on an electric motor or motor-driven electric appliance and felt it vibrate? Ever wonder why it vibrates? What is there about the operation of the motor, or the object to which it is attached, that causes the vibrations? Is there anything "regular" about the vibrations, or are they the result of random causes? In this…

  8. Determination of excitation temperature and vibrational temperature of the N{sub 2}(C {sup 3}{pi}{sub u}, {nu}') state in Ne-N{sub 2} RF discharges

    Energy Technology Data Exchange (ETDEWEB)

    Rehman, N U; Naveed, M A; Zakaullah, M [Department of Physics, Quaid-i-Azam University, 45320 Islamabad (Pakistan); Khan, F U [Department of Physics, Gomal University D.I. Khan (Pakistan)

    2008-05-01

    Optical emission spectroscopy is used to investigate the effect of neon mixing on the excitation and vibrational temperatures of the second positive system in nitrogen plasma generated by a 13.56 MHz RF generator. The excitation temperature is determined from Ne I line intensities, using Boltzmann's plot. The overpopulation of the levels of the N{sub 2} (C {sup 3}{pi}{sub u}, {nu}') states with neon mixing are monitored by measuring the emission intensities of the second positive system of nitrogen molecules. The vibrational temperature is calculated for the sequence {delta}{nu} = -2, with the assumption that it follows Boltzmann's distribution. But due to overpopulation of levels, e.g. 1, 4, a linearization process was employed for such distributions allowing us to calculate the vibrational temperature of the N{sub 2} (C {sup 3}{pi}{sub u}, {nu}') state. It is found that the excitation temperature as well as the vibrational temperature of the second positive system can be raised significantly by mixing neon with nitrogen plasma. It is also found that the vibrational temperature increases with power and pressure up to 0.5 mbar.

  9. Whole body vibration in sport: a critical review.

    Science.gov (United States)

    Costantino, C; Gimigliano, R; Olvirri, S; Gimigliano, F

    2014-12-01

    Whole body vibration training is a recent area of study in athletic conditioning, health and rehabilitation. This paper provides a review of the effectiveness of this type of training in sport. A search was conducted across several electronic databases and studies on effects of whole body vibration training on sport performance were reviewed. Thirteen articles were included in the final analysis. The following variables were considered: participants investigated (sex and age), characteristics of the vibration (frequency and amplitude), training (type of sport, exposure time and intensity, tests used, type of study, effects examined and results obtained). This review considers proposed neural mechanisms and identifies studies that have demonstrated the effectiveness of WBV in sports. It considers where WBV might act and suggests that vibration can be an effective training stimulus. Future studies should focus on evaluating the long-term effects of vibration training and identify optimum frequency and amplitude, improve strength and muscular performance.

  10. [Vibrational physical exercises as the rehabilitation in gerontology].

    Science.gov (United States)

    Piatin, V F; Shirolapov, I V; Nikitin, O L

    2009-01-01

    Vibration biomechanical stimulation as the physiological basis of vibration physical exercises (whole body vibration) causes reflecting muscle contractions like tonic vibration reflex. This type of intervention leads to high intensive stimulation of proprioceptors as called muscle spindles which result in alteration in parameters of activity and developments of human physiological functions. This type of training has broad positive influence on organism. Acceleration physical exercises improve muscle performance, flexibility, nervous function, significantly increase bone mineral density, physiological secretion of anabolic hormones, growth and anti-aging factors; normalize/decrease cortisol as anti-stress effect and are beneficial for balance and mobility as well. It is showed acceleration training caused by vibration stimulus is beneficial for people suffering from osteoporosis and obesity, for rehabilitation of nervous and motor function in patients with Parkinson's disease, multiple sclerosis and stroke.

  11. Vibrations and Stability

    DEFF Research Database (Denmark)

    Thomsen, Jon Juel

    About this textbook An ideal text for students that ties together classical and modern topics of advanced vibration analysis in an interesting and lucid manner. It provides students with a background in elementary vibrations with the tools necessary for understanding and analyzing more complex...... dynamical phenomena that can be encountered in engineering and scientific practice. It progresses steadily from linear vibration theory over various levels of nonlinearity to bifurcation analysis, global dynamics and chaotic vibrations. It trains the student to analyze simple models, recognize nonlinear...... phenomena and work with advanced tools such as perturbation analysis and bifurcation analysis. Explaining theory in terms of relevant examples from real systems, this book is user-friendly and meets the increasing interest in non-linear dynamics in mechanical/structural engineering and applied mathematics...

  12. Estimation of the distribution of low-intensity ultrasound mechanical index as a parameter affecting the proliferation of spermatogonia stem cells in vitro.

    Science.gov (United States)

    Moghaddam, Zeinab Hormozi; Mokhtari-Dizaji, Manijhe; Movahedin, Mansoureh; Ravari, Mohammad Ehsan

    2017-07-01

    Considering the use of physical and mechanical stimulation, such as low-intensity ultrasound for proliferation and differentiation of stem cells, it is essential to understand the physical and acoustical mechanisms of acoustic waves in vitro. Mechanical index is used for quantifying acoustic cavitation and the relationship between acoustic pressure and the frequency. In this study, modeling of the mechanical index was applied to provide treatment protocol and to understand the effective physical processes on reproducibility of stem cells. Due to low intensity of ultrasound, Rayleigh integral model has been used for acoustic pressure computation. The acoustic pressure and mechanical index equations are modeled and solved to estimate optimal mechanical index for 28, 40, 150kHz and 1MHz frequencies. This model are solved in different intensities and distances from transducer in cylindrical coordinates. Based on the results of the mechanical index, regions with threshold mechanical index of 0.7 were identified for extracting of radiation arrangement to cell medium. Acoustic pressure distribution along the axial and radial was extracted. In order to validate the results of the modeling, the acoustic pressure in the water and near field depth was measured by a piston hydrophone. Results of modeling and experiments show that the model is consistent well to experimental results with 0.91 and 0.90 correlation of coefficient (pmechanical index is more effective on enhancing the proliferation rate of the spermatogonia stem cells during the seven days of culture. In contrast, higher mechanical index has a harmful effect on the spermatogonial stem cells. Thus, considering cavitation threshold of different materials is necessary to find effective mechanical index ranges on proliferation for the used frequencies. This acoustic propagation model and ultrasound mechanical index assessments can be used with acceptable accuracy, for the extraction special arrangement of acoustic

  13. Vibrational spectroscopy investigation using ab initio and DFT vibrational analysis of 7-chloro-2-methylamino-5-phenyl-3H-1,4-benzodiazepine-4-oxide

    Science.gov (United States)

    Prasath, M.; Muthu, S.; Arun Balaji, R.

    2013-09-01

    The FT-IR and FT-Raman spectrum of 7-chloro-2-methylamino-5-phenyl-3H-1, 4-benzodiazepine-4-oxide (7CMP4BO) has been recorded in the region 4000-400 and 4000-100 cm-1 respectively. The optimized geometry, Thermodynamic properties, NBO, Molecular Electrostatic Potentials, PES, frequency and intensity of the vibrational bands of 7CMP4BO were obtained by the ab initio HF and density functional theory (DFT), B3LYP/6-31G (d,p) basis set. The molecule orbital contributions were studied by using the total (TDOS), partial (PDOS), and overlap population (OPDOS) density of states. The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR and FT-Raman spectra. A detailed interpretation of the vibrational spectra of this compound has been made on the basis of the calculated potential energy distribution (PED). The linear polarizability (α) and the first order hyperpolarizability (β) values of the investigated molecule have been computed using DFT quantum mechanical calculations. The observed and the calculated frequencies are found to be in good agreement. The experimental spectra also coincide satisfactorily with those of theoretically calculated values.

  14. Granular flows down inclined and vibrated planes: influence of basal friction

    Science.gov (United States)

    Gaudel, Naïma; Kiesgen de Richter, Sébastien; Louvet, Nicolas; Jenny, Mathieu; Skali-Lami, Salaheddine

    2017-06-01

    We present an experimental study about granular avalanches when external mechanical vibrations are applied. The results of the flow properties highlight the existence of two distinct regimes: (i) a gravity-driven regime at large angles where scaling laws are in agreement with those reported in the literature for non-vibrating granular flows and (ii) a vibration-driven regime at small angles where no flow occurs without applied vibrations. The flow in this regime is well described by a vibrationinduced activated process. We also propose an empirical law to capture the evolution of the thickness of the deposits as a function of the vibration intensity and the inclination angle.

  15. Changes in the distribution of colonising and infecting Candida spp. isolates, antifungal drug consumption and susceptibility in a French intensive care unit: A 10-year study.

    Science.gov (United States)

    Sasso, Milène; Roger, Claire; Sasso, Magali; Poujol, Hélène; Barbar, Saber; Lefrant, Jean-Yves; Lachaud, Laurence

    2017-12-01

    Monitoring fungal ecology and resistance to antifungal agents within intensive care units (ICU) is essential for the management of invasive fungal infections. Therefore, a retrospective descriptive study was carried in the ICU of Nimes University Hospital, France, from 2007 to 2016. As the majority of invasive fungal infections in ICU are caused by Candida species, the study objectives were to describe Candida species distribution, to assess candidaemia incidence and to monitor the antifungal drug susceptibility of Candida isolates and the consumption of antifungal agents. Among the recorded invasive Candida infections (n=244), 43% were intra-abdominal and 22% bloodstream infections. Candida albicans was the most frequent species (55.8%), followed by Candida glabrata (14.1%), Candida tropicalis (10%), Candida parapsilosis (8%) and Candida krusei (5.3%). Candidaemia incidence was 4.49 per 1000 admissions. The mean consumption of antifungal agents was of 170.5 defined daily doses (DDD) for 1000 hospital days (HD) per year. Changes in antifungal drug consumption were observed, with an increased use of echinocandins (from 17.96 DDD/1000 HD in 2007 to 48.76 DDD/1000 HD in 2016), and the total treatment cost tripled during the study period. No significant change in fungal ecology or in the emergence of resistant species was observed; indeed, only 1.1% of isolates presented an unusual resistance to antifungal agents. © 2017 Blackwell Verlag GmbH.

  16. Influence of an intensive agricultural drainage basin on the seasonal distribution of organic pollutants in seawater from a Mediterranean coastal lagoon (Mar Menor, SE Spain).

    Science.gov (United States)

    Moreno-González, R; Campillo, J A; León, V M

    2013-12-15

    The seasonal distribution of polycyclic aromatic hydrocarbons, polychlorinated biphenyls, organochlorine pesticides, organophosphorus pesticides, triazines and other organic pollutants in surface seawater from the Mar Menor lagoon (SE Spain) was characterized from spring 2009 to winter 2010 by stir bar sorptive extraction and thermal desorption followed by capillary gas chromatography coupled to mass spectrometry (SBSE-GC-MS). The most ubiquitous pollutants were chlorpyrifos, chlortal-dimethyl, terbuthylazine, naphthalene and propyzamide throughout the year. Insecticides and herbicides were predominant in summer and spring, and fungicides were more abundant in autumn and winter. Chlorpyrifos was predominant in autumn and spring; herbicides (propyzamide, terbuthylazine and terbuthylazine-desethyl) in autumn and fungicides (flutolanil, boscalid, cyprodinil) in autumn and winter. The highest concentrations for the majority of pollutants were detected in autumn as consequence of air and surface/ground water inputs, and above all of desorption from terrigenous materials deposited in sediments by two intense flash flood events (September 2009). Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. The Distribution of the Informative Intensity of the Text in Terms of its Structure (On Materials of the English Texts in the Mining Sphere

    Directory of Open Access Journals (Sweden)

    Znikina Ludmila

    2017-01-01

    Full Text Available The article deals with the distribution of informative intensity of the English-language scientific text based on its structural features contributing to the process of formalization of the scientific text and the preservation of the adequacy of the text with derived semantic information in relation to the primary. Discourse analysis is built on specific compositional and meaningful examples of scientific texts taken from the mining field. It also analyzes the adequacy of the translation of foreign texts into another language, the relationships between elements of linguistic systems, the degree of a formal conformance, translation with the specific objectives and information needs of the recipient. Some key words and ideas are emphasized in the paragraphs of the English-language mining scientific texts. The article gives the characteristic features of the structure of paragraphs of technical text and examples of constructions in English scientific texts based on a mining theme with the aim to explain the possible ways of their adequate translation.

  18. The influence of laser pulse duration and energy on ICP-MS signal intensity, elemental fractionation, and particle size distribution in NIR fs-LA-ICP-MS.

    Science.gov (United States)

    Diwakar, Prasoon K; Harilal, Sivanandan S; LaHaye, Nicole L; Hassanein, Ahmed; Kulkarni, Pramod

    Laser parameters, typically wavelength, pulse width, irradiance, repetition rate, and pulse energy, are critical parameters which influence the laser ablation process and thereby influence the LA-ICP-MS signal. In recent times, femtosecond laser ablation has gained popularity owing to the reduction in fractionation related issues and improved analytical performance which can provide matrix-independent sampling. The advantage offered by fs-LA is due to shorter pulse duration of the laser as compared to the phonon relaxation time and heat diffusion time. Hence the thermal effects are minimized in fs-LA. Recently, fs-LA-ICP-MS demonstrated improved analytical performance as compared to ns-LA-ICP-MS, but detailed mechanisms and processes are still not clearly understood. Improvement of fs-LA-ICP-MS over ns-LA-ICP-MS elucidates the importance of laser pulse duration and related effects on the ablation process. In this study, we have investigated the influence of laser pulse width (40 fs to 0.3 ns) and energy on LA-ICP-MS signal intensity and repeatability using a brass sample. Experiments were performed in single spot ablation mode as well as rastering ablation mode to monitor the Cu/Zn ratio. The recorded ICP-MS signal was correlated with total particle counts generated during laser ablation as well as particle size distribution. Our results show the importance of pulse width effects in the fs regime that becomes more pronounced when moving from femtosecond to picosecond and nanosecond regimes.

  19. Vibrational lineshapes of adsorbates on solid surfaces

    Science.gov (United States)

    Ueba, H.

    A review is presented of the current activity in vibrational spectroscopy of adsorbates on metal surfaces. A brief introduction of the representative spectroscopies is given to demonstrate the rich information contained in vibrational spectra, which are characterized by their intensity, peak position and width. Analysis of vibrational spectra enables us to gain the deep insight into not only the local character of adsorption site or geometry, but also the dynamical interaction between the adsorbates or between the adsorbate and the substrate. Some recent instructive experimental results, mostly of a CO molecule adsorbed on various metal surfaces, are accompanied by the corresponding theoretical recipe for vibrational excitation mechanisms. Wide spread experimental results of the C-O stretching frequency of CO adsorbed on metal surfaces are discussed in terms of the chemical effect involving the static and dynamic charge transfers between the chemisorbed CO and metal, and also of the electrostatic dipole-dipole interaction between the molecules. The central subject of this review is directed to the linshapes characterized by the vibrational relaxation processes of adsorbates. A simple and transparent model is introduced to show that the characteristic decay time of the correlation function for the vibrational coordinates is the key quantity to determine the spectral lineshapes. Recent experimental results focused on a search for an intrinsic broadening mechanism are reviewed in the light of the so-called T1 (energy) and T2 (phase) relaxation processesof the vibrational excited states of adsorbates. Those are the vibrational energy dissipation into the elementary excitation, such as phonons or electron-hole pairs in the metal substrate, and pure dephasing due to the energy exchange with the sorroundings. The change of width and frequency by varying the experimental variables, such as temperature or isotope effect, provides indispensable knowledge for the dynamical

  20. Costs and expected gain in lifetime health from intensive care versus general ward care of 30,712 individual patients: a distribution-weighted cost-effectiveness analysis.

    Science.gov (United States)

    Lindemark, Frode; Haaland, Øystein A; Kvåle, Reidar; Flaatten, Hans; Norheim, Ole F; Johansson, Kjell A

    2017-08-21

    Clinicians, hospital managers, policy makers, and researchers are concerned about high costs, increased demand, and variation in priorities in the intensive care unit (ICU). The objectives of this modelling study are to describe the extra costs and expected health gains associated with admission to the ICU versus the general ward for 30,712 patients and the variation in cost-effectiveness estimates among subgroups and individuals, and to perform a distribution-weighted economic evaluation incorporating extra weighting to patients with high severity of disease. We used a decision-analytic model that estimates the incremental cost per quality-adjusted life year (QALY) gained (ICER) from ICU admission compared with general ward care using Norwegian registry data from 2008 to 2010. We assigned increasing weights to health gains for those with higher severity of disease, defined as less expected lifetime health if not admitted. The study has inherent uncertainty of findings because a randomized clinical trial comparing patients admitted or rejected to the ICU has never been performed. Uncertainty is explored in probabilistic sensitivity analysis. The mean cost-effectiveness of ICU admission versus ward care was €11,600/QALY, with 1.6 QALYs gained and an incremental cost of €18,700 per patient. The probability (p) of cost-effectiveness was 95% at a threshold of €22,000/QALY. The mean ICER for medical admissions was €10,700/QALY (p = 97%), €12,300/QALY (p = 93%) for admissions after acute surgery, and €14,700/QALY (p = 84%) after planned surgery. For individualized ICERs, there was a 50% probability that ICU admission was cost-effective for 85% of the patients at a threshold of €64,000/QALY, leaving 15% of the admissions not cost-effective. In the distributional evaluation, 8% of all patients had distribution-weighted ICERs (higher weights to gains for more severe conditions) above €64,000/QALY. High-severity admissions gained the most, and were more

  1. The effect of vibration on bed voidage behaviors in fluidized beds with large particles

    Directory of Open Access Journals (Sweden)

    H. Jin

    2007-09-01

    Full Text Available The effects of vibration parameters, operating conditions and material properties on bed voidage were investigated using an optical fiber probe approach in a vibrating fluidized bed with a diameter of 148 mm. Variables studied included frequency (0-282 s-1, amplitude (0 mm-1 mm, bed height (0.1 m-0.4 m as well as four kinds of particles (belonging to Geldart's B and D groups. The axial and radial voidage distribution with vibration is compared with that without vibration, which shows vibration can aid in the fluidization behaviors of particles. For a larger vibration amplitude, the vibration seriously affects bed voidage. The vibration energy can damp out for particle layers with increasing the bed height. According to analysis of experimental data, an empirical correlation for predicting bed voidage, giving good agreement with the experimental data and a deviation within ±15%, was proposed.

  2. Signature analysis of roller bearing vibrations - Lubrication effects

    Science.gov (United States)

    Su, Y.-T.; Sheen, Y.-T.; Lin, M.-H.

    This study investigates the vibration signature of roller bearings, induced by the surface irregularities of components, under various lubricating conditions. The bearing vibration is modeled as the output of the bearing assembly which is subjected to the excitations of surface irregularities through the oil-film. The oil-film acts as a spring between the roller and race. The stiffness of oil-film under different lubricating conditions is studied from the empirical equation of minimum oil-film thickness. It is shown that the vibration spectra of a normal roller bearing may have a pattern of equal frequency spacing distribution (EFSD) whose frequency information is similar to that of a damaged bearing. Under large loading and low running speed, the vibration energy is low if the lubricant viscosity is high. On the other hand, at high running speed, the vibration energy is high with high lubricant viscosity.

  3. Fault diagnosis of planetary gearboxes via torsional vibration signal analysis

    Science.gov (United States)

    Feng, Zhipeng; Zuo, Ming J.

    2013-04-01

    Torsional vibration signals are theoretically free from the amplitude modulation effect caused by time variant vibration transfer paths due to the rotation of planet carrier and sun gear, and therefore their spectral structure are simpler than transverse vibration signals. Thus, it is potentially easy and effective to diagnose planetary gearbox faults via torsional vibration signal analysis. We give explicit equations to model torsional vibration signals, considering both distributed gear faults (like manufacturing or assembly errors) and local gear faults (like pitting, crack or breakage of one tooth), and derive the characteristics of both the traditional Fourier spectrum and the proposed demodulated spectra of amplitude envelope and instantaneous frequency. These derivations are not only effective to diagnose single gear fault of planetary gearboxes, but can also be generalized to detect and locate multiple gear faults. We validate experimentally the signal models, as well as the Fourier spectral analysis and demodulation analysis methods.

  4. Impact of the number of control points has on isodose distributions in a dynamic multileaf collimator intensity-modulated radiation therapy delivery

    Energy Technology Data Exchange (ETDEWEB)

    Goraj, Andrew [Department of Radiation Medicine, Roswell Park Cancer Institute, Buffalo, NY (United States); Boer, Steven F. de, E-mail: steven.deboer@roswellpark.org [Department of Radiation Medicine, Roswell Park Cancer Institute, Buffalo, NY (United States); Department of Physiology and Biophysics, State University of New York at Buffalo, NY (United States)

    2012-01-01

    Intensity-modulated radiation therapy (IMRT) is a powerful technique in planning the delivery of dose. The most common IMRT delivery requires the use of moving multileaf collimators (MLCs) to deliver the requested fluence pattern. A dynamic delivery IMRT field file will contain several control points that are defined MLC shapes at a marked fraction of the delivered monitor units. The size of this file and the fidelity of the deliverable fluence are proportional to the number of control points defined. This study investigates the effect of reducing the number of control points has on the resultant dose distribution quality in complex IMRT in efforts to reduce transfer times, loading times, check sum times and file storage. Analysis was performed with 6 head and neck patients on an Eclipse version 8.5 treatment planning system (Varian, Palo Alto, CA). To ensure the quality of all treatments, Eclipse defines a minimum of 64 and a maximum of 320 control points per subfield (Eclipse Algorithms Reference guide). All 6 patients' plans were calculated with fixed 64, 166, and 320 control points using the sliding window technique. In addition, each plan was calculated in variable mode (Normal mode) in which the planning system determined the required number of control points. Each of the 4 plans for each patient was renormalized to provide the same mean planning target volume (PTV) 70 dose. Dose values for critical and target structures were examined for each patient. When examining the minimum, maximum, and mean doses to all target structures, it was noted that the greatest reduction in target dose coverage caused by reduced number of control points was 0.5%, which occurred for the minimum dose to the PTV56 structure in one plan.' Dose analysis for critical structures showed no clinically significant increase in dose when compared with the 320 control point plan.

  5. Optical fiber macro-bend seismic sensor for real-time vibration monitoring in harsh industrial environment

    Science.gov (United States)

    Poczęsny, T.; Prokopczuk, K.; Makowski, P. L.; Domański, A. W.

    2011-05-01

    Condition monitoring of electromechanical equipment for heavy industry places special requirements on the environmental sensors' construction. Widely available electronic devices can easily suffer from the electromagnetic interference or may pose fire hazard. An important category of dedicated sensing devices emerged during the expansion of fiber optic technology in the last few decades. In this paper, contributing in the basic research in the field, a novel kind of intrinsic intensity fiber optic vibration sensor is proposed. We present a fiber loop based opto-mechanical transducer utilized in two configurations: the inertial sensor system working as accelerometer and a distributed vibration sensor. The complete mathematical model for the latter type configuration has been introduced, as well as some results of preliminary experimental tests on both sensor concepts have been presented.

  6. Vibrational spectroscopy of resveratrol

    Science.gov (United States)

    Billes, Ferenc; Mohammed-Ziegler, Ildikó; Mikosch, Hans; Tyihák, Ernő

    2007-11-01

    In this article the authors deal with the experimental and theoretical interpretation of the vibrational spectra of trans-resveratrol (3,5,4'-trihydroxy- trans-stilbene) of diverse beneficial biological activity. Infrared and Raman spectra of the compound were recorded; density functional calculations were carried out resulting in the optimized geometry and several properties of the molecule. Based on the calculated force constants, a normal coordinate analysis yielded the character of the vibrational modes and the assignment of the measured spectral bands.

  7. Bumblebee vibration activated foraging

    OpenAIRE

    Su, Dan Kuan-Nien

    2009-01-01

    The ability use vibrational signals to activate nestmate foraging is found in the highly social bees, stingless bees and honey bees, and has been hypothesized to exist in the closely related, primitively eusocial bumble bees. We provide the first strong and direct evidence that this is correct. Inside the nest, bumble bee foragers produce brief bursts of vibration (foraging activation pulses) at 594.5 Hz for 63±26 ms (velocityRMS=0.46±0.02mm/s, forceRMS=0.8±0.2 mN. Production of these vibrati...

  8. Man-Induced Vibrations

    DEFF Research Database (Denmark)

    Jönsson, Jeppe; Hansen, Lars Pilegaard

    1994-01-01

    concerned with spectator-induced vertical vibrations on grandstands. The idea is to use impulse response analysis and base the load description on the load impulse. If the method is feasable, it could be used in connection with the formulation of requirements in building codes. During the last two decades...... work has been done on the measurement of the exact load functions and related reponse analysis. A recent work using a spectral description has been performed by Per-Erik Erikson and includes a good literature survey. Bachmann and Ammann give a good overview of vibrations caused by human activity. Other...

  9. Vibrations and waves

    CERN Document Server

    Kaliski, S

    2013-01-01

    This book gives a comprehensive overview of wave phenomena in different media with interacting mechanical, electromagnetic and other fields. Equations describing wave propagation in linear and non-linear elastic media are followed by equations of rheological models, models with internal rotational degrees of freedom and non-local interactions. Equations for coupled fields: thermal, elastic, electromagnetic, piezoelectric, and magneto-spin with adequate boundary conditions are also included. Together with its companion volume Vibrations and Waves. Part A: Vibrations this work provides a wealth

  10. Structure, isomerism, and vibrational assignment of aluminumtrifluoroacetylacetonate. An experimental and theoretical study

    Science.gov (United States)

    Afzali, R.; Vakili, M.; Boluri, E.; Tayyari, S. F.; Nekoei, A.-R.; Hakimi-Tabar, M.; Darugar, V.

    2018-02-01

    An interpretation of the experimental IR and Raman spectra of Aluminum (III) trifluoroacetylacetonate (Al(TFAA)3) complex, which were synthesized by us, is first reported here. The charge distribution, isomerism, strength of metal‑oxygen binding and vibrational spectral properties for this complex structure were theoretically investigated through population analysis, geometry optimization and harmonic frequency calculations, performed at B3LYP/6-311G* level of theory. In the population analysis, two different approaches reffered to as ;Atoms in molecules (AIM);, and ;Natural Bond Orbital (NBO); were used. According to the calculation resuls, the energy difference between the cis and trans isomers of Al(TFAA)3 is very small and indicates that both isomers coexist in the sample in comparable proportions. Comparison of the calculated frequency and intensity data with the observed IR and Raman spectra of the complex has supported this conclusion. On the other hand, comparison of the structural and vibrational spectral data of Al(TFAA)3, which were experimentally measured and calculated at B3LYP/6-311G* level, with the corresponding data of Aluminum acetylacetonate (Al(AA)3) has revealed the effects of CF3 substitution on the structural and vibrational spectral data associated with the CH3 groups in the complex structure.

  11. Heterogeneous Dynamics of Coupled Vibrations

    NARCIS (Netherlands)

    Cringus, Dan; Jansen, Thomas I. C.; Pshenichnikov, Maxim S.; Schoenlein, RW; Corkum, P; DeSilvestri, S; Nelson, KA; Riedle, E

    2009-01-01

    Frequency-dependent dynamics of coupled stretch vibrations of a water molecule are revealed by 2D IR correlation spectroscopy. These are caused by non-Gaussian fluctuations of the environment around the individual OH stretch vibrations.

  12. Hubungan Phantom Vibration Syndrome Terhadap Sleep Disorder dan Kondisi Stress

    Directory of Open Access Journals (Sweden)

    Ajeng Yeni Setianingrum

    2017-10-01

    Full Text Available Phantom vibration syndrome is a condition where a person would feel the sensation of vibration of a cell phone as if there were incoming notification but the fact is not. This research investigated the relationship between phantom vibration syndromes, sleep disorder and stress condition. Questionnaires were distributed to 120 participants with age range 18 to 23 years old. Data of participants showed that all of participants using a smart mobile phone and 24% of them have more than one cell phone. Time usage of cell phone is at least 1 hour. 23% of participants using a cell phone for social media activity, followed by 21% related to entertainment (music, video and games. The results showed a positive relationship between phantom vibration syndrome, sleep disorder and stress condition. Insomnia contributed a greater influence on stress condition. However, the phantom vibration syndrome is more directly affecting the sleep apnea compared to insomnia and stress condition. Therefore, the phantom vibration syndrome more affects stress condition indirectly, through sleep disorder (sleep apnea and insomnia. Consequently, phantom vibration syndrome has a strong relationship with stress condition at the time of the phantom vibration syndrome can cause sleep disorder.

  13. Computational Fluid Dynamic Analysis of a Vibrating Turbine Blade

    Directory of Open Access Journals (Sweden)

    Osama N. Alshroof

    2012-01-01

    Full Text Available This study presents the numerical fluid-structure interaction (FSI modelling of a vibrating turbine blade using the commercial software ANSYS-12.1. The study has two major aims: (i discussion of the current state of the art of modelling FSI in gas turbine engines and (ii development of a “tuned” one-way FSI model of a vibrating turbine blade to investigate the correlation between the pressure at the turbine casing surface and the vibrating blade motion. Firstly, the feasibility of the complete FSI coupled two-way, three-dimensional modelling of a turbine blade undergoing vibration using current commercial software is discussed. Various modelling simplifications, which reduce the full coupling between the fluid and structural domains, are then presented. The one-way FSI model of the vibrating turbine blade is introduced, which has the computational efficiency of a moving boundary CFD model. This one-way FSI model includes the corrected motion of the vibrating turbine blade under given engine flow conditions. This one-way FSI model is used to interrogate the pressure around a vibrating gas turbine blade. The results obtained show that the pressure distribution at the casing surface does not differ significantly, in its general form, from the pressure at the vibrating rotor blade tip.

  14. Acoustic vibration can enhance bacterial biofilm formation.

    Science.gov (United States)

    Murphy, Mark F; Edwards, Thomas; Hobbs, Glyn; Shepherd, Joanna; Bezombes, Frederic

    2016-12-01

    This paper explores the use of low-frequency-low-amplitude acoustic vibration on biofilm formation. Biofilm development is thought to be governed by a diverse range of environmental signals and much effort has gone into researching the effects of environmental factors including; nutrient availability, pH and temperature on the growth of biofilms. Many biofilm-forming organisms have evolved to thrive in mechanically challenging environments, for example soil yet, the effects of the physical environment on biofilm formation has been largely ignored. Exposure of Pseudomonas aeruginosa to vibration at 100, 800 and 1600 Hz for 48 h, resulted in a significant increase in biofilm formation compared with the control, with the greatest growth seen at 800 Hz vibration. The results also show that this increase in biofilm formation is accompanied with an increase in P. aeruginosa cell number. Acoustic vibration was also found to regulate the spatial distribution of biofilm formation in a frequency-dependent manner. Exposure of Staphylococcus aureus to acoustic vibration also resulted in enhanced biofilm formation with the greatest level of biofilm being formed following 48 h exposure at 1600 Hz. These results show that acoustic vibration can be used to control biofilm formation and therefore presents a novel and potentially cost effective means to manipulate the development and yield of biofilms in a range of important industrial and medical processes. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  15. Two-mode elliptical-core weighted fiber sensors for vibration analysis

    Science.gov (United States)

    Vengsarkar, Ashish M.; Murphy, Kent A.; Fogg, Brian R.; Miller, William V.; Greene, Jonathan A.; Claus, Richard O.

    1992-01-01

    Two-mode, elliptical-core optical fibers are demonstrated in weighted, distributed and selective vibration-mode-filtering applications. We show how appropriate placement of optical fibers on a vibrating structure can lead to vibration mode filtering. Selective vibration-mode suppression on the order of 10 dB has been obtained using tapered two-mode, circular-core fibers with tapering functions that match the second derivatives of the modes of vibration to be enhanced. We also demonstrate the use of chirped, two-mode gratings in fibers as spatial modal sensors that are equivalents of shaped piezoelectric sensors.

  16. Composite Struts Would Damp Vibrations

    Science.gov (United States)

    Dolgin, Benjamin P.

    1991-01-01

    New design of composite-material (fiber/matrix laminate) struts increases damping of longitudinal vibrations without decreasing longitudinal stiffness or increasing weight significantly. Plies with opposing chevron patterns of fibers convert longitudinal vibrational stresses into shear stresses in intermediate viscoelastic layer, which dissipate vibrational energy. Composite strut stronger than aluminum strut of same weight and stiffness.

  17. Forced Vibration Analysis for a FGPM Cylindrical Shell

    Directory of Open Access Journals (Sweden)

    Hong-Liang Dai

    2013-01-01

    Full Text Available This article presents an analytical study for forced vibration of a cylindrical shell which is composed of a functionally graded piezoelectric material (FGPM. The cylindrical shell is assumed to have two-constituent material distributions through the thickness of the structure, and material properties of the cylindrical shell are assumed to vary according to a power-law distribution in terms of the volume fractions for constituent materials, the exact solution for the forced vibration problem is presented. Numerical results are presented to show the effect of electric excitation, thermal load, mechanical load and volume exponent on the static and force vibration of the FGPM cylindrical shell. The goal of this investigation is to optimize the FGPM cylindrical shell in engineering, also the present solution can be used in the forced vibration analysis of cylindrical smart elements.

  18. Ship Vibration Design Guide

    Science.gov (United States)

    1989-07-01

    Frachtschiffen," Werft Reederie Hafen, 1925. 4-21 Noonan, E. F. "Vibration Considerations for 120,000 CM LNG Ships," NKF: Preliminary Report No. 7107, 25...Ship Response to Ice - A Second Season by C. Daley, J. W. St. John, R. Brown, J. Meyer , and I. Glen 1990 SSC-340 Ice Forces and Ship Response to Ice

  19. Compact Vibration Damper

    Science.gov (United States)

    Ivanco, Thomas G. (Inventor)

    2014-01-01

    A vibration damper includes a rigid base with a mass coupled thereto for linear movement thereon. Springs coupled to the mass compress in response to the linear movement along either of two opposing directions. A converter coupled to the mass converts the linear movement to a corresponding rotational movement. A rotary damper coupled to the converter damps the rotational movement.

  20. Vibrations and Eigenvalues

    Indian Academy of Sciences (India)

    The vibrating string problem is the source of much mathematicsand physics. This article describes Lagrange's formulationof a discretised version of the problem and its solution.This is also the first instance of an eigenvalue problem. Author Affiliations. Rajendra Bhatia1. Ashoka University, Rai, Haryana 131 029, India.

  1. Blade Vibration Measurement System

    Science.gov (United States)

    Platt, Michael J.

    2014-01-01

    The Phase I project successfully demonstrated that an advanced noncontacting stress measurement system (NSMS) could improve classification of blade vibration response in terms of mistuning and closely spaced modes. The Phase II work confirmed the microwave sensor design process, modified the sensor so it is compatible as an upgrade to existing NSMS, and improved and finalized the NSMS software. The result will be stand-alone radar/tip timing radar signal conditioning for current conventional NSMS users (as an upgrade) and new users. The hybrid system will use frequency data and relative mode vibration levels from the radar sensor to provide substantially superior capabilities over current blade-vibration measurement technology. This frequency data, coupled with a reduced number of tip timing probes, will result in a system capable of detecting complex blade vibrations that would confound traditional NSMS systems. The hardware and software package was validated on a compressor rig at Mechanical Solutions, Inc. (MSI). Finally, the hybrid radar/tip timing NSMS software package and associated sensor hardware will be installed for use in the NASA Glenn spin pit test facility.

  2. Vibration Sensitive Keystroke Analysis

    NARCIS (Netherlands)

    Lopatka, M.; Peetz, M.-H.; van Erp, M.; Stehouwer, H.; van Zaanen, M.

    2009-01-01

    We present a novel method for performing non-invasive biometric analysis on habitual keystroke patterns using a vibration-based feature space. With the increasing availability of 3-D accelerometer chips in laptop computers, conventional methods using time vectors may be augmented using a distinct

  3. Active isolation of vibrations with adaptive structures

    Science.gov (United States)

    Guigou, C.; Fuller, C. R.; Wagstaff, P. R.

    1991-01-01

    Vibration transmission in structures is controlled by means of a technique which employs distributed arrays of piezoelectric transducers bonded to the supporting structure. Distributed PVDF piezoelectric strips are employed as error sensors, and a two-channel feedforward adaptive LMS algorithm is used for minimizing error signals and thereby controlling the structure. A harmonic force input excites a thick plate, and a receiving plate is configured with three pairs of piezoelectric actuators. Modal analyses are performed to determine the resonant frequencies of the system, and a scanning laser vibrometer is used to study the shape of the response of the receiving plate during excitation with and without the control algorithm. Efficient active isolation of the vibrations is achieved with modal suppression, and good control is noted in the on-resonance cases in which increased numbers of PVDF sensors and piezoelectric actuators are employed.

  4. Topology optimization of free vibrations of fiber laser packages

    DEFF Research Database (Denmark)

    Hansen, Lars Voxen

    2005-01-01

    The optimization problems described in the present paper are inspired by the problem of fiber laser package design for vibrating environments. The optical frequency of tuned fiber lasers glued to stiff packages is sensitive to acoustic or other mechanical vibrations. The paper presents a method...... for reducing this sensitivity by limiting the glue point movement on the package while using only a limited knowledge of vibrating external forces. By use of topology optimization a density distribution for the package is obtained, where the critical eigenmode of the package only effects a small elongation...

  5. Effect of Ultrasonic Vibration on Proliferation and Differentiation of Cells

    Directory of Open Access Journals (Sweden)

    Haruka Hino

    2016-12-01

    Full Text Available The effect of mechanical stimulation of vibration on proliferation and differentiation of cells has been studied in vitro. To apply the vibration on the cells, a piezoelectric element was attached on the outside surface of the bottom of the culture plate of six wells. The piezoelectric element was vibrated by sinusoidally alternating voltage at 1.0 MHz generated by a function generator. Five kinds of cells were used in the experiment: C2C12 (mouse myoblast cell, L929 (fibroblast connective tissue of mouse, Hepa1-6 (mouse hepatoma cell, HUVEC (human umbilical vein endothelial cell, and Neuro-2a (mouse neural crest-derived cell line. After the incubation for 24 hours, cells were exposed to the ultrasonic vibration intermittently for three days: for thirty minutes per day. At the end of the experiment, the number of cells was counted by colorimetric method with a microplate photometer. In the case of Neuro-2a, the total length of the neurite was calculated at the microscopic image. The experimental study shows following results. Cells are exfoliated by the strong vibration. Proliferation and differentiation of cells are accelerated with mild vibration. The optimum intensity of vibration depends on the kind of cells.

  6. Studies of wood pallet response to forced vibration

    OpenAIRE

    Lauer, Ira Edwin

    1991-01-01

    Wood pallets serve as interfaces between packaged products and transport vehicles. vertical vibrations are transmitted through pallets into unit-loads. Pallet response to forced vibration affects forces experienced by products. A study was conducted to determine how pallet design influenced the resonant response of a uniformly distributed case goods unit-load. other studies were conducted to develop a pallet section model to emulate the response of three stringer wood ...

  7. Electric field generated by axial longitudinal vibration modes of microtubule.

    Science.gov (United States)

    Cifra, M; Pokorný, J; Havelka, D; Kucera, O

    2010-05-01

    Microtubules are electrically polar structures fulfilling prerequisites for generation of oscillatory electric field in the kHz to GHz region. Energy supply for excitation of elasto-electrical vibrations in microtubules may be provided from GTP-hydrolysis; motor protein-microtubule interactions; and energy efflux from mitochondria. We calculated electric field generated by axial longitudinal vibration modes of microtubules for random, and coherent excitation. In case of coherent excitation of vibrations, the electric field intensity is highest at the end of microtubule. The dielectrophoretic force exerted by electric field on the surrounding molecules will influence the kinetics of microtubule polymerization via change in the probability of the transport of charge and mass particles. The electric field generated by vibrations of electrically polar cellular structures is expected to play an important role in biological self-organization. 2010 Elsevier Ireland Ltd. All rights reserved.

  8. Comparison of linear and nonlinear programming approaches for "worst case dose" and "minmax" robust optimization of intensity-modulated proton therapy dose distributions.

    Science.gov (United States)

    Zaghian, Maryam; Cao, Wenhua; Liu, Wei; Kardar, Laleh; Randeniya, Sharmalee; Mohan, Radhe; Lim, Gino

    2017-03-01

    Robust optimization of intensity-modulated proton therapy (IMPT) takes uncertainties into account during spot weight optimization and leads to dose distributions that are resilient to uncertainties. Previous studies demonstrated benefits of linear programming (LP) for IMPT in terms of delivery efficiency by considerably reducing the number of spots required for the same quality of plans. However, a reduction in the number of spots may lead to loss of robustness. The purpose of this study was to evaluate and compare the performance in terms of plan quality and robustness of two robust optimization approaches using LP and nonlinear programming (NLP) models. The so-called "worst case dose" and "minmax" robust optimization approaches and conventional planning target volume (PTV)-based optimization approach were applied to designing IMPT plans for five patients: two with prostate cancer, one with skull-based cancer, and two with head and neck cancer. For each approach, both LP and NLP models were used. Thus, for each case, six sets of IMPT plans were generated and assessed: LP-PTV-based, NLP-PTV-based, LP-worst case dose, NLP-worst case dose, LP-minmax, and NLP-minmax. The four robust optimization methods behaved differently from patient to patient, and no method emerged as superior to the others in terms of nominal plan quality and robustness against uncertainties. The plans generated using LP-based robust optimization were more robust regarding patient setup and range uncertainties than were those generated using NLP-based robust optimization for the prostate cancer patients. However, the robustness of plans generated using NLP-based methods was superior for the skull-based and head and neck cancer patients. Overall, LP-based methods were suitable for the less challenging cancer cases in which all uncertainty scenarios were able to satisfy tight dose constraints, while NLP performed better in more difficult cases in which most uncertainty scenarios were hard to meet

  9. Acoustical analysis of gear housing vibration

    Science.gov (United States)

    Seybert, A. F.; Wu, T. W.; Wu, X. F.; Oswald, Fred B.

    1991-01-01

    The modal and acoustical analysis of the NASA gear-noise rig is described. Experimental modal analysis techniques were used to determine the modes of vibration of the transmission housing. The resulting modal data were then used in a boundary element method (BEM) analysis to calculate the sound pressure and sound intensity on the surface of the housing as well as the radiation efficiency of each mode. The radiation efficiencies of the transmission housing modes are compared with theoretical results for finite, baffled plates. A method that uses the measured mode shapes and the BEM to predict the effect of simple structural changes on the sound radiation efficiency of the modes of vibration is also described.

  10. Femtochemistry in the electronic ground state: Dynamic Stark control of vibrational dynamics

    DEFF Research Database (Denmark)

    Shu, Chuan-Cun; Thomas, Esben Folger; Henriksen, Niels Engholm

    2017-01-01

    We study the interplay of vibrational and rotational excitation in a diatomic molecule due to the non-resonant dynamic Stark effect. With a fixed peak intensity, optimal Gaussian pulse durations for maximizing vibrational or rotational transitions are obtained analytically and confirmed numerically...

  11. Research on a Composite Power-Superimposed Ultrasonic Vibrator for Wire Drawing

    Directory of Open Access Journals (Sweden)

    Shen Liu

    2016-01-01

    Full Text Available Vibration power and amplitude are essential factors in ultrasonic drawing processes, especially for difficult-to-draw materials like titanium and its alloys. This paper presents a new composite power-superimposed ultrasonic vibrator for wire drawing which was driven by three separate ultrasonic transducers. The transducers were uniformly distributed around the circular cross section of the vibrator, with their axes along the radial direction and pointing to the center. The vibrator can concentrate the vibrational energy of multiple transducers and transform the radial vibration into a longitudinal vibrator because of the Poisson effect and therefore output larger vibration power and amplitude. In the paper, the four-terminal network method was used to establish the vibration equations of the vibrator. The FE model was established in ANSYS to investigate its characteristics under various excitation conditions. A prototype was manufactured and measurements were performed to verify the validation of FEA results. The results matched well with the theoretical results. It was found that the composite vibrator achieved an amplitude of about 40 μm when driven by square wave signals with 120° in phase difference, which implies a potential way of applying ultrasonic vibration to the processing of difficult-to-draw materials.

  12. Animal Communications Through Seismic Vibrations

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Peggy (University of Tulsa)

    2001-05-02

    Substrate vibration has been important to animals as a channel of communication for millions of years, but our literature on vibration in this context of biologically relevant information is only decades old. The jaw mechanism of the earliest land vertebrates allowed them to perceive substrate vibrations as their heads lay on the ground long before airborne sounds could be heard. Although the exact mechanism of vibration production and the precise nature of the wave produced are not always understood, recent development of affordable instrumentation to detect and measure vibrations has allowed researchers to answer increasingly sophisticated questions about how animals send and receive vibration signals. We now know that vibration provides information used in predator defense, prey detection, recruitment to food, mate choice, intrasexual competition, and maternal/brood social interactions in a variety of insect orders, spiders, crabs, scorpions, chameleons, frogs, golden moles, mole rats, kangaroos rats, wallabies, elephants and bison.

  13. Vibration Attenuation of Plate Using Multiple Vibration Absorbers

    Directory of Open Access Journals (Sweden)

    Zaman Izzuddin

    2014-07-01

    Full Text Available Vibrations are undesired phenomenon and it can cause harm, distress and unsettling influence to the systems or structures, for example, aircraft, automobile, machinery and building. One of the approach to limit this vibration by introducing passive vibration absorber attached to the structure. In this paper, the adequacy of utilizing passive vibration absorbers are investigated. The vibration absorber system is designed to minimize the vibration of a thin plate fixed along edges. The plate’s vibration characteristics, such as, natural frequency and mode shape are determined using three techniques: theoretical equations, finite element (FE analysis and experiment. The results demonstrate that the first four natural frequencies of fixed-fixed ends plate are 48, 121, 193 and 242 Hz, and these results are corroborated well with theoretical, FE simulation and experiment. The experiment work is further carried out with attached single and multiple vibration absorbers onto plate by tuning the absorber’s frequency to match with the excitation frequency. The outcomes depict that multiple vibration absorbers are more viable in lessening the global structural vibration.

  14. Good vibrations. [Hydraulic turbines

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, P.

    1994-07-01

    The latest developments in the Voith Turbine Control and Automation System (VTLS), which couples digital control technology to hydropower plant equipment, are described. Prominent among these is the vibration diagnostics module for hydraulic turbines. It provides machine-specific diagnostic logic for a vibration monitoring and analysis system. Of the two other VTLS modules described, the operation module optimizes the control of a power plant with three or more turbines by considering the individual properties of each in turn, recommending which should be run, and how, in order to partition the load for a required power output. The cavitation module is a diagnostic system which enables the limits of operation of the turbines to be extended to bands just outside those determined by cavitation calculations. (3 figures). (UK)

  15. Pickin’ up good vibrations

    CERN Multimedia

    Katarina Anthony

    2015-01-01

    In preparation for the civil engineering work on the HL-LHC, vibration measurements were carried out at the LHC’s Point 1 last month. These measurements will help evaluate how civil engineering work could impact the beam, and will provide crucial details about the site’s geological make-up before construction begins.   A seismic truck at Point 1 generated wave-like vibrations measured by EN/MME. From carrying out R&D to produce state-of-the-art magnets to developing innovative, robust materials capable of withstanding beam impact, the HL-LHC is a multi-faceted project involving many groups and teams across CERN’s departments. It was in this framework that the project management mandated CERN's Mechanical and Materials Engineering (EN/MME) group to measure the propagation of vibrations around Point 1. Their question: can civil engineering work for the HL-LHC – the bulk of which is scheduled for LS2 – begin while the LHC is running? Alth...

  16. Vibrational stability of graphene

    Directory of Open Access Journals (Sweden)

    Yangfan Hu

    2013-05-01

    Full Text Available The mechanical stability of graphene as temperature rises is analyzed based on three different self-consistent phonon (SCP models. Compared with three-dimensional (3-D materials, the critical temperature Ti at which instability occurs for graphene is much closer to its melting temperature Tm obtained from Monte Carlo simulation (Ti ≃ 2Tm, K. V. Zakharchenko, A. Fasolino, J. H. Los, and M. I. Katsnelson, J. Phys. Condens. Matter 23, 202202. This suggests that thermal vibration plays a significant role in melting of graphene while melting for 3-D materials is often dominated by topologic defects. This peculiar property of graphene derives from its high structural anisotropy, which is characterized by the vibrational anisotropic coefficient (VAC, defined upon its Lindermann ratios in different directions. For any carbon based material with a graphene-like structure, the VAC value must be smaller than 5.4 to maintain its stability. It is also found that the high VAC value of graphene is responsible for its negative thermal expansion coefficient at low temperature range. We believe that the VAC can be regarded as a new criterion concerning the vibrational stability of any low-dimensional (low-D materials.

  17. Costs and expected gain in lifetime health from intensive care versus general ward care of 30,712 individual patients: a distribution-weighted cost-effectiveness analysis

    National Research Council Canada - National Science Library

    Frode Lindemark; Oystein A Haaland; Reidar Kvale; Hans Flaatten; Ole F Norheim; Kjell A Johansson

    2017-01-01

    ... in cost-effectiveness estimates among subgroups and individuals, and to perform a distribution-weighted economic evaluation incorporating extra weighting to patients with high severity of disease...

  18. Molecular Vibration-Activity Relationship in the Agonism of Adenosine Receptors

    Directory of Open Access Journals (Sweden)

    Hyun Keun Chee

    2013-12-01

    Full Text Available The molecular vibration-activity relationship in the receptor-ligand interaction of adenosine receptors was investigated by structure similarity, molecular vibration, and hierarchical clustering in a dataset of 46 ligands of adenosine receptors. The resulting dendrogram was compared with those of another kind of fingerprint or descriptor. The dendrogram result produced by corralled intensity of molecular vibrational frequency outperformed four other analyses in the current study of adenosine receptor agonism and antagonism. The tree that was produced by clustering analysis of molecular vibration patterns showed its potential for the functional classification of adenosine receptor ligands.

  19. Effect of different mechanical vibration on blood parameters of one ...

    African Journals Online (AJOL)

    Mechanical vibrations are congenital to any system of transportation. In poultry industry, the higher or lower intensity of this agent during the transportation of eggs and chickens can increase the production losses and decrease the efficiency of the system as a whole. This study was carried out to investigate the effects of ...

  20. Laser-induced vibrational dynamics of ozone in solid argon

    DEFF Research Database (Denmark)

    Hansen, Flemming Yssing; Amstrup, B.; Henriksen, Niels Engholm

    1997-01-01

    We consider the vibrational dynamics, induced by an intense infrared laser pulse, in an ozone molecule with isotopic substitution, that is, (OOO)-O-16-O-16-O-18 and compare the dynamics in the gas phase and in solid ar on. not perturbed by argon on a time-scale of a few picoseconds and selective...

  1. PROBABILISTIC ESTIMATION OF VIBRATION INFLUENCE ON SENSITIVE SYSTEM ELEMENTS

    Directory of Open Access Journals (Sweden)

    A. A. Lobaty

    2009-01-01

    Full Text Available The paper considers a problem pertaining to an estimation of vibration influence on sensitive system elements. Dependences of intensity and probability of a process exit characterizing a condition of a system element for the preset range that allow to estimate serviceability and no-failure operation of the system have been obtained analytically in the paper

  2. Energy harvesting from wood floor vibration using a piezoelectric generator

    Science.gov (United States)

    Jiangming Kan; Robert J. Ross; Xiping Wang; Wenbin Li

    2017-01-01

    Vibration can occur in wood floor systems as a consequence of a variety of human activities, ranging from common daily movements associated with individuals living in homes to high-intensity activities associated with sporting events that are held in large sports arenas. For example, the potential for harvesting energy from a wooden floor system in public buildings...

  3. Rotational Dependence of Intramolecular Dynamics in Acetylene at Low Vibrational Excitation as Deduced from High Resolution Spectroscopy

    Science.gov (United States)

    Perry, David S.; Miller, Anthony; Amyay, B.; Fayt, A.; Herman, M.

    2010-06-01

    The link between energy-resolved spectra and time-resolved dynamics is explored quantitatively for acetylene (12C2H2), X1Σg+ with up to 8,600 wn of vibrational energy. This comparison is based on the extensive knowledge of the vibration-rotation energy levels and on the model Hamiltonian used to fit them to high precision. Simulated intensity borrowing features in high resolution absorption spectra and predicted survival probabilities for intramolecular vibrational redistribution (IVR) are first investigated for the ν4+ν5 and ν3 bright states, for J = 2, 30 and 100. The dependence of the results on the rotational quantum number and on the choice of vibrational bright state reflects the interplay of three kinds of off-diagonal resonances: anharmonic, rotational l-type, and Coriolis. The dynamical quantities used to characterize the calculated time-dependent dynamics are the dilution factor φd, the IVR lifetime τIVR, and the recurrence time τrec. For the two bright states ν3+2ν4 and 7ν4, the collisionless dynamics for thermally averaged rotational distributions at T = 27, 270 and 500 K were calculated from the available spectroscopic data. For the 7ν4 bright state, an apparent irreversible decay of is found. In all cases, the model Hamiltonian allows a detailed calculation of the energy flow among all of the coupled zeroth-order vibration-rotation states. B. Amyay, S. Robert, M. Herman, A. Fayt, B. Raghavendra, A. Moudens, J. Thiévin, B. Rowe, and R. Georges, J. Chem. Phys., 131, 114301 (2009).

  4. Influence of vibrational treatment on thermomechanical response of material under conditions identical to friction stir welding

    Energy Technology Data Exchange (ETDEWEB)

    Konovalenko, Ivan S., E-mail: ivkon@ispms.tsc.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); Konovalenko, Igor S., E-mail: igkon@ispms.tsc.ru; Kolubaev, Evgeniy A., E-mail: eak@ispms.tsc.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation); Dmitriev, Andrey I., E-mail: dmitr@ispms.tsc.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation); National Research Tomsk State University, Tomsk, 634050 (Russian Federation); Psakhie, Sergey G., E-mail: sp@ms.tsc.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk State University, Tomsk, 634050 (Russian Federation)

    2015-10-27

    A molecular dynamics model was constructed to describe material loading on the atomic scale by the mode identical to friction stir welding. It was shown that additional vibration applied to the tool during the loading mode provides specified intensity values and continuous thermomechanical action during welding. An increase in additional vibration intensity causes an increase both in the force acting on the workpiece from the rotating tool and in temperature within the welded area.

  5. Enroute to investigating protein dynamics under selective vibrational excitation at the THz FEL FELBE

    Science.gov (United States)

    Bauer, C.; Gensch, M.; Heberle, J.

    2012-05-01

    We aim at investigating proteins under irradiation with intense THz radiation tuned into resonance to specific vibrational modes. This approach is much in analogy to recent experiments that showed selective vibrational control in Complex materials [1, 2, 3]. To achieve the necessary sensitivity for protein dynamics we combine a novel time-resolved IR difference spectroscopic setup with uniquely intense, tuneable narrow bandwidth THz radiation (1.2 - 75 THz) of the free electron laser FELBE.

  6. Downhole Vibration Monitoring and Control System

    Energy Technology Data Exchange (ETDEWEB)

    Martin E. Cobern

    2007-09-30

    The objective of this program is to develop a system to both monitor the vibration of a bottomhole assembly, and to adjust the properties of an active damper in response to these measured vibrations. The key feature of this system is its use of a magnetorheological fluid (MRF) to allow the damping coefficient to be changed extensively, rapidly and reversibly without the use of mechanical valves, but only by the application of a current. Phase I of this program, which entailed modeling and design of the necessary subsystems and design, manufacture and test of a full laboratory prototype, was completed on May 31, 2004. Much of the effort was devoted to the design and testing of the MRF damper, itself. The principal objectives of Phase II were: more extensive laboratory testing, including the evaluation of different feedback algorithms for control of the damper; design and manufacture of a field prototype system; and, testing of the field prototype in a drilling laboratory. Phase II concluded on January 31, 2006, and a final report was issued. Work on Phase III of the project began during the first quarter, 2006, with the objectives of building precommercial prototypes, testing them in a drilling laboratory and the field; developing and implementing a commercialization plan. All of these have been accomplished. The Downhole Vibration Monitoring & Control System (DVMCS) prototypes have been successfully proven in testing at the TerraTek drilling facility and at the Rocky Mountain Oilfield Test Center (RMOTC.) Based on the results of these tests, we have signed a definitive development and distribution agreement with Smith, and commercial deployment is underway. This current version of the DVMCS monitors and controls axial vibrations. Due to time and budget constraints of this program, it was not possible to complete a system that would also deal with lateral and torsional (stick-slip) vibrations as originally planned; however, this effort is continuing without DOE

  7. Silicon Micromachined Sensor for Broadband Vibration Analysis

    Science.gov (United States)

    Gutierrez, Adolfo; Edmans, Daniel; Cormeau, Chris; Seidler, Gernot; Deangelis, Dave; Maby, Edward

    1995-01-01

    The development of a family of silicon based integrated vibration sensors capable of sensing mechanical resonances over a broad range of frequencies with minimal signal processing requirements is presented. Two basic general embodiments of the concept were designed and fabricated. The first design was structured around an array of cantilever beams and fabricated using the ARPA sponsored multi-user MEMS processing system (MUMPS) process at the Microelectronics Center of North Carolina (MCNC). As part of the design process for this first sensor, a comprehensive finite elements analysis of the resonant modes and stress distribution was performed using PATRAN. The dependence of strain distribution and resonant frequency response as a function of Young's modulus in the Poly-Si structural material was studied. Analytical models were also studied. In-house experimental characterization using optical interferometry techniques were performed under controlled low pressure conditions. A second design, intended to operate in a non-resonant mode and capable of broadband frequency response, was proposed and developed around the concept of a cantilever beam integrated with a feedback control loop to produce a null mode vibration sensor. A proprietary process was used to integrat a metal-oxide semiconductor (MOS) sensing device, with actuators and a cantilever beam, as part of a compatible process. Both devices, once incorporated as part of multifunction data acquisition and telemetry systems will constitute a useful system for NASA launch vibration monitoring operations. Satellite and other space structures can benefit from the sensor for mechanical condition monitoring functions.

  8. Random vibrations theory and practice

    CERN Document Server

    Wirsching, Paul H; Ortiz, Keith

    1995-01-01

    Random Vibrations: Theory and Practice covers the theory and analysis of mechanical and structural systems undergoing random oscillations due to any number of phenomena— from engine noise, turbulent flow, and acoustic noise to wind, ocean waves, earthquakes, and rough pavement. For systems operating in such environments, a random vibration analysis is essential to the safety and reliability of the system. By far the most comprehensive text available on random vibrations, Random Vibrations: Theory and Practice is designed for readers who are new to the subject as well as those who are familiar with the fundamentals and wish to study a particular topic or use the text as an authoritative reference. It is divided into three major sections: fundamental background, random vibration development and applications to design, and random signal analysis. Introductory chapters cover topics in probability, statistics, and random processes that prepare the reader for the development of the theory of random vibrations a...

  9. Universality in the dynamical properties of seismic vibrations

    Science.gov (United States)

    Chatterjee, Soumya; Barat, P.; Mukherjee, Indranil

    2018-02-01

    We have studied the statistical properties of the observed magnitudes of seismic vibration data in discrete time in an attempt to understand the underlying complex dynamical processes. The observed magnitude data are taken from six different geographical locations. All possible magnitudes are considered in the analysis including catastrophic vibrations, foreshocks, aftershocks and commonplace daily vibrations. The probability distribution functions of these data sets obey scaling law and display a certain universality characteristic. To investigate the universality features in the observed data generated by a complex process, we applied Random Matrix Theory (RMT) in the framework of Gaussian Orthogonal Ensemble (GOE). For all these six places the observed data show a close fit with the predictions of RMT. This reinforces the idea of universality in the dynamical processes generating seismic vibrations.

  10. Patterns of granular convection and separation in narrow vibration bed

    Directory of Open Access Journals (Sweden)

    Liu Chuanping

    2017-01-01

    Full Text Available Granular convection/separation of single and binary component particles are studied in a narrow vibration bed, respectively. With filling the single light particles (molecular sieve beads, the bed exhibits five different states successively by increasing the vibration frequency f from 15Hz to 70 Hz (vibration strength Γ>3, as the global convection, symmetrical heap, unsymmetrical heap, local convection and pseudo solid. Comparatively, the granular bed of the single heavy particles (steel beads is only in pseudo solid state at the above vibration condition. By filling binary component particles (molecular sieve and same size steel beads instead of the single component, the bed shows similar convection state with that of the single molecular sieve beads, and the heavy steel beads are aggregated in the centre of convention roll as a core. Varying the initial distribution of binary component particles, the final convection and separation are not influenced, although the aggregation process of steel beads changes.

  11. Nonlinear vibration of edge cracked functionally graded Timoshenko beams

    Science.gov (United States)

    Kitipornchai, S.; Ke, L. L.; Yang, J.; Xiang, Y.

    2009-07-01

    Nonlinear vibration of beams made of functionally graded materials (FGMs) containing an open edge crack is studied in this paper based on Timoshenko beam theory and von Kármán geometric nonlinearity. The cracked section is modeled by a massless elastic rotational spring. It is assumed that material properties follow exponential distributions through beam thickness. The Ritz method is employed to derive the governing eigenvalue equation which is then solved by a direct iterative method to obtain the nonlinear vibration frequencies of cracked FGM beams with different end supports. A detailed parametric study is conducted to study the influences of crack depth, crack location, material property gradient, slenderness ratio, and end supports on the nonlinear free vibration characteristics of cracked FGM beams. It is found that unlike isotropic homogeneous beams, both intact and cracked FGM beams show different vibration behavior at positive and negative amplitudes due to the presence of bending-extension coupling in FGM beams.

  12. Trends in the Distribution of Teacher Effectiveness in the Intensive Partnerships for Effective Teaching: Progress Report. Working Paper WR-1036-BMGF

    Science.gov (United States)

    Steele, Jennifer L.; Baird, Matthew; Engberg, John; Hunter, Gerald Paul

    2014-01-01

    As part of its effective teaching initiative, the Bill & Melinda Gates Foundation partnered with three urban school districts across the U.S. and a group of four charter management organizations to undertake a strategic set of human capital reforms. A key objective of the "Intensive Partnerships for Effective Teaching" program was to…

  13. Mistuned Vibration of Radial Inflow Turbine Impeller

    Science.gov (United States)

    Hattori, Hiroaki; Unno, Masaru; Hayashi, Masazumi

    This paper is concerned with the numerical prediction of impeller blade vibration due to excitation by the wake of nozzle guide vanes in turbochargers. This problem is particularly important as turbochargers are used in a broad range of operation conditions, leading to some unavoidable resonant frequencies. In the paper, first the unsteady pressure distributions on the rotor blades are analyzed and structural response analysis is performed for the excitation component with largest contribution to pressure fluctuation. In a parametric survey, pressure expansion ratio and inlet flow temperature are varied in order to investigate the impact on vibration response. Unsteady CFD+FEM prediction well explains the qualitative trends that appeared in experimental survey. The result also points out that a fluctuation in natural frequency among the blades of only a few percent may cause large magnification factors. Finally, adjustment of disk thickness is suggested as a measure to reduce the magnification factor and its effectiveness demonstrated numerically as well as experimentally.

  14. Inter-plant vibrational communication in a leafhopper insect.

    Directory of Open Access Journals (Sweden)

    Anna Eriksson

    Full Text Available Vibrational communication is one of the least understood channels of communication. Most studies have focused on the role of substrate-borne signals in insect mating behavior, where a male and a female establish a stereotyped duet that enables partner recognition and localization. While the effective communication range of substrate-borne signals may be up to several meters, it is generally accepted that insect vibrational communication is limited to a continuous substrate. Until now, interplant communication in absence of physical contact between plants has never been demonstrated in a vibrational communicating insect. With a laser vibrometer we investigated transmission of natural and played back vibrational signals of a grapevine leafhopper, Scaphoideus titanus, when being transmitted between leaves of different cuttings without physical contact. Partners established a vibrational duet up to 6 cm gap width between leaves. Ablation of the antennae showed that antennal mechanoreceptors are not essential in detection of mating signals. Our results demonstrate for the first time that substrate discontinuity does not impose a limitation on communication range of vibrational signals. We also suggest that the behavioral response may depend on the signal intensity.

  15. Inter-plant vibrational communication in a leafhopper insect.

    Science.gov (United States)

    Eriksson, Anna; Anfora, Gianfranco; Lucchi, Andrea; Virant-Doberlet, Meta; Mazzoni, Valerio

    2011-05-05

    Vibrational communication is one of the least understood channels of communication. Most studies have focused on the role of substrate-borne signals in insect mating behavior, where a male and a female establish a stereotyped duet that enables partner recognition and localization. While the effective communication range of substrate-borne signals may be up to several meters, it is generally accepted that insect vibrational communication is limited to a continuous substrate. Until now, interplant communication in absence of physical contact between plants has never been demonstrated in a vibrational communicating insect. With a laser vibrometer we investigated transmission of natural and played back vibrational signals of a grapevine leafhopper, Scaphoideus titanus, when being transmitted between leaves of different cuttings without physical contact. Partners established a vibrational duet up to 6 cm gap width between leaves. Ablation of the antennae showed that antennal mechanoreceptors are not essential in detection of mating signals. Our results demonstrate for the first time that substrate discontinuity does not impose a limitation on communication range of vibrational signals. We also suggest that the behavioral response may depend on the signal intensity.

  16. Inter-Plant Vibrational Communication in a Leafhopper Insect

    Science.gov (United States)

    Eriksson, Anna; Anfora, Gianfranco; Lucchi, Andrea; Virant-Doberlet, Meta; Mazzoni, Valerio

    2011-01-01

    Vibrational communication is one of the least understood channels of communication. Most studies have focused on the role of substrate-borne signals in insect mating behavior, where a male and a female establish a stereotyped duet that enables partner recognition and localization. While the effective communication range of substrate-borne signals may be up to several meters, it is generally accepted that insect vibrational communication is limited to a continuous substrate. Until now, interplant communication in absence of physical contact between plants has never been demonstrated in a vibrational communicating insect. With a laser vibrometer we investigated transmission of natural and played back vibrational signals of a grapevine leafhopper, Scaphoideus titanus, when being transmitted between leaves of different cuttings without physical contact. Partners established a vibrational duet up to 6 cm gap width between leaves. Ablation of the antennae showed that antennal mechanoreceptors are not essential in detection of mating signals. Our results demonstrate for the first time that substrate discontinuity does not impose a limitation on communication range of vibrational signals. We also suggest that the behavioral response may depend on the signal intensity. PMID:21573131

  17. IR and Raman spectra, ab initio and density functional computations of the vibrational spectra, molecular geometries and atomic charges of uracil and 5-aminouracil

    Science.gov (United States)

    Singh, J. S.

    2014-09-01

    Infrared (IR) and Raman spectra of uracil and 5-aminouracil have been recorded and analyzed between the region 200-4000 cm-1. The optimized molecular geometries, atomic polar tensor (APT) charges and vibrational characteristics have been studied theoretically using restricted Hartree-Fock (RHF) and density functional theory (DFT) methods. Using the Becke’s exchange in conjunction with Lee-Yang-Parr’s correlation functional and Becke’s three-parameter hybrid method (B3LYP), the ab initio and DFT calculations were carried out to study the optimized molecular fundamental vibrational frequencies for uracil and 5-aminouracil by employing Gaussian-03 program. The fundamental vibrational frequencies along with their corresponding intensities in IR and Raman activities and depolarization ratios of the Raman lines have also been calculated using the RHF and DFT methods employing different basis sets. In quantum chemical calculations, the most of B3LYP/6-311++G** vibrational frequencies are in the excellent agreement with available experimental assignments and helped in the reassignments of some fundamental vibrational modes. On the basis of calculated results, the assignments of some missing frequencies in the experimental study are proposed. Assuming under the Cs point group for both molecules, the distribution of normal mode of vibrations between the two species as planar (a‧) and non-planar (a″) are given by 25a‧ + 11a″, of which 30 modes (21a‧ + 9a″) correspond to the uracil moiety and 6 modes (4a‧ + 2a″) to the NH2 group. Kekule ring stretching mode is found to be comparatively higher frequency magnitude than the mode of uracil due to the involvement of hydrogen bonding of amino group. But, the ring breathing is found to be lower frequency magnitude compared to those for uracil which could be due to mass effect of the NH2 group in place of the hydrogen atom. All other bands have also been assigned different fundamentals/overtones/combinations.

  18. Intensity formulas for triplet bands

    Science.gov (United States)

    Budo, A.

    1982-01-01

    Previous work in this area is surveyed and the mathematics involved in determining the quantitative intensity measurements in triplet bands is presented. Explicit expressions for the intensity distribution in the branches of the 3 Sigma-3 Pi and 1 Sigma-3Pi bands valid for all values of the coupling constant Y of the 3 Pi terms are given. The intensity distribution calculated according to the formulas given is compared with measurements of PH, 3 Pi-3 Sigma. Good quantitative agreement is obtained.

  19. Calculation of dose distribution in the patient for verification of plans of intensity modulated radiation therapy; Calculo de la distribucion de dosis en el paciente para la verificacion de planes de radioterapia de intensidad modulada

    Energy Technology Data Exchange (ETDEWEB)

    Perez Moreno, J. M.; Zucca Aparicio, D.; Garcia Ruiz-Zorrila, J.; Fernandez Leton, J. P.; Minambres Moro, A.

    2013-07-01

    The precision in the delivery of radiation therapy treatments intensity modulated depends on, among other things, of the proper administration of the sequence of radiation calculated on the planning system. In recent years the electronic devices of imaging portal have shown as a useful tool for the measurement of dose distribution with high resolution. An algorithm has been developed to calculate the distribution of dose in the patient's Anatomy, using the accelerator as measuring equipment electronic imaging of portal In this way the acceptance criteria can be changed in the dosimetry verifications pretreatment of radiation therapy treatments, from those based on evaluation of gamma index to others based on the evaluation of the distribution of dose in the patient. (Author)

  20. Chaotic vortex induced vibrations

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, J.; Sheridan, J. [Fluids Laboratory for Aeronautical and Industrial Research (FLAIR), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, Victoria 3800 (Australia); Leontini, J. S. [Department of Mechanical and Product Design Engineering, Swinburne University of Technology, Hawthorn, Victoria 3122 (Australia); Lo Jacono, D. [Institut de Mécanique des Fluides de Toulouse (IMFT), CNRS, UPS and Université de Toulouse, 31400 Toulouse (France)

    2014-12-15

    This study investigates the nature of the dynamic response of an elastically mounted cylinder immersed in a free stream. A novel method is utilized, where the motion of the body during a free vibration experiment is accurately recorded, and then a second experiment is conducted where the cylinder is externally forced to follow this recorded trajectory. Generally, the flow response during both experiments is identical. However, particular regimes exist where the flow response is significantly different. This is taken as evidence of chaos in these regimes.

  1. Lattice Vibrations in Chlorobenzenes:

    DEFF Research Database (Denmark)

    Reynolds, P. A.; Kjems, Jørgen; White, J. W.

    1974-01-01

    Lattice vibrational dispersion curves for the ``intermolecular'' modes in the triclinic, one molecule per unit cell β phase of p‐C6D4Cl2 and p‐C6H4Cl2 have been obtained by inelastic neutron scattering. The deuterated sample was investigated at 295 and at 90°K and a linear extrapolation to 0°K...... was applied in order to correct for anharmonic effects. Calculations based on the atom‐atom model for van der Waals' interaction and on general potential parameters for the aromatic compounds agree reasonably well with the experimental observations. There is no substantial improvement in fit obtained either...

  2. An intense elastico-mechanoluminescence material CaZnOS:Mn2+ for sensing and imaging multiple mechanical stresses.

    Science.gov (United States)

    Zhang, Jun-Cheng; Xu, Chao-Nan; Kamimura, Sunao; Terasawa, Yujin; Yamada, Hiroshi; Wang, Xusheng

    2013-06-03

    The elastico-mechanoluminescence (EML) properties of CaZnOS:Mn2+ are investigated. The CaZnOS:Mn2+/epoxy resin composite can simultaneously "feel" (sense) and "see" (image) various types of mechanical stress over a wide energy and frequency range (ultrasonic vibration, impact, friction and compression) as an intense red emission (610 nm) from Mn2+ ions. Further, the accurate linear relation between emission intensity and different stress parameters (intensity, energy and deformation rate) are confirmed. The EML mechanism is explained using a piezoelectrically induced trapped carrier excitation mode. All the results imply that CaZnOS:Mn2+ has potential as a stress probe to sense and image multiple mechanical stresses and decipher the stress intensity distribution.

  3. Vibrational anomalies and marginal stability of glasses

    KAUST Repository

    Marruzzo, Alessia

    2013-01-01

    The experimentally measured vibrational spectrum of glasses strongly deviates from that expected in Debye\\'s elasticity theory: The density of states deviates from Debye\\'s ω2 law ("boson peak"), the sound velocity shows a negative dispersion in the boson-peak frequency regime, and there is a strong increase in the sound attenuation near the boson-peak frequency. A generalized elasticity theory is presented, based on the model assumption that the shear modulus of the disordered medium fluctuates randomly in space. The fluctuations are assumed to be uncorrelated and have a certain distribution (Gaussian or otherwise). Using field-theoretical techniques one is able to derive mean-field theories for the vibrational spectrum of a disordered system. The theory based on a Gaussian distribution uses a self-consistent Born approximation (SCBA),while the theory for non-Gaussian distributions is based on a coherent-potential approximation (CPA). Both approximate theories appear to be saddle-point approximations of effective replica field theories. The theory gives a satisfactory explanation of the vibrational anomalies in glasses. Excellent agreement of the SCBA theory with simulation data on a soft-sphere glass is reached. Since the SCBA is based on a Gaussian distribution of local shear moduli, including negative values, this theory describes a shear instability as a function of the variance of shear fluctuations. In the vicinity of this instability, a fractal frequency dependence of the density of states and the sound attenuation ∝ ω1+a is predicted with a ≲ 1/2. Such a frequency dependence is indeed observed both in simulations and in experimental data. We argue that the observed frequency dependence stems from marginally stable regions in a glass and discuss these findings in terms of rigidity percolation. © 2013 EDP Sciences and Springer.

  4. Quantum dynamics of vibrational excitations and vibrational charge ...

    Indian Academy of Sciences (India)

    Quantum dynamics of vibrational excitations and vibrational charge transfer processes in H+ + O2 collisions at collision energy 23 eV ... The Fritz Haber Research Centre and The Department of Physical Chemisry, Hebrew University of Jerusalem, Jerusalem, Israel 91904; Department of Chemistry, Indian Institute of ...

  5. The Shock and Vibration Bulletin. Part 4. Vibration Testing, Instrumentation, Loads and Environments, Tracked Vehicles

    Science.gov (United States)

    1978-09-01

    distribution. . % logic. Clock speeds were kept very low, extensive buf- fering and shielding were used, and capacitive filters were This idea was...As Lorisciousness of the • . o a load from a shorted to open circuit, and capacitive to concept grows. it is expected that the control systems...transducer, and an angular velocity vibrometer . for collecting a broad base of aircraft angular Their applications will be discussed in light vibration

  6. Molecular orbital studies (hardness, chemical potential, electrophilicity, and first electron excitation), vibrational investigation and theoretical NBO analysis of 2-hydroxy-5-bromobenzaldehyde by density functional method

    Science.gov (United States)

    Nataraj, A.; Balachandran, V.; Karthick, T.

    2013-01-01

    In this work, the vibrational spectral analysis was carried out using Raman and infrared spectroscopy in the range 4000-400 cm-1 and 3500-100 cm-1, respectively, for the 2-hydroxy-5-bromobenzaldehyde (HBB). The experimental spectra were recorded in the solid phase. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) with the standard B3LYP/6-311G++(d,p) method and basis set. Normal co-ordinate calculations were performed with the DFT force field corrected by a recommended set of scaling factors yielding fairly good agreement between observed and calculated frequencies. Simulation of infrared and Raman spectra utilizing the results of these calculations led to excellent overall agreement with the observed spectral patterns. The complete assignments were performed on the basis of the potential energy distribution (PED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The optimized geometric parameters (bond lengths and bond angles) were compared with experimental values of related compound. The stability of the molecule arising from hyper conjugative interactions and the charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The directly calculated ionization potential (IP), electron affinity (EA), electronegativity (χ), electrophilicity index (ω), hardness (η), chemical potential (μ), and first electron excitation (τ) are all correlated with the HOMO and LUMO energies with their molecular properties. These show that charge transfer occurs within the molecule. Furthermore, molecular electrostatic potential maps (MESP) of the molecule have been calculated.

  7. Low Intensity Vibration as a Treatment for Traumatic Muscle Injury

    Science.gov (United States)

    2016-08-01

    treatment that will help to restore normal muscle and joint function to injured military personnel. The proposed animal and cell culture studies will...the methods required for work on Specific Aim 3. Mr. Corbiere was also trained on cell culture work and will be planning experiments to perform at...which showed that cultured macrophages are responsive to LIV by downregulating expression of pro-inflammatory markers and upregulating expression of

  8. A new laser vibrometry-based 2D selective intensity method for source identification in reverberant fields: part II. Application to an aircraft cabin

    Science.gov (United States)

    Revel, G. M.; Martarelli, M.; Chiariotti, P.

    2010-07-01

    The selective intensity technique is a powerful tool for the localization of acoustic sources and for the identification of the structural contribution to the acoustic emission. In practice, the selective intensity method is based on simultaneous measurements of acoustic intensity, by means of a couple of matched microphones, and structural vibration of the emitting object. In this paper high spatial density multi-point vibration data, acquired by using a scanning laser Doppler vibrometer, have been used for the first time. Therefore, by applying the selective intensity algorithm, the contribution of a large number of structural sources to the acoustic field radiated by the vibrating object can be estimated. The selective intensity represents the distribution of the acoustic monopole sources on the emitting surface, as if each monopole acted separately from the others. This innovative selective intensity approach can be very helpful when the measurement is performed on large panels in highly reverberating environments, such as aircraft cabins. In this case the separation of the direct acoustic field (radiated by the vibrating panels of the fuselage) and the reverberant one is difficult by traditional techniques. The work shown in this paper is the application of part of the results of the European project CREDO (Cabin Noise Reduction by Experimental and Numerical Design Optimization) carried out within the framework of the EU. Therefore the aim of this paper is to illustrate a real application of the method to the interior acoustic characterization of an Alenia Aeronautica ATR42 ground test facility, Alenia Aeronautica being a partner of the CREDO project.

  9. Literature survey on anti-vibration gloves

    CSIR Research Space (South Africa)

    Sampson, E

    2003-08-01

    Full Text Available ............................................................................................................... 1 2. HAND ARM VIBRATION SYNDROME (HAVS).......................................................... 2 2.1 Hand-arm vibration................................................. Error! Bookmark not defined. 2.2 Human Response to vibration...

  10. An investigation on wind turbine resonant vibrations

    DEFF Research Database (Denmark)

    Tibaldi, Carlo; Kim, Taeseong; Larsen, Torben J.

    2016-01-01

    Wind turbine resonant vibrations are investigated based on aeroelastic simulations both in frequency and time domain. The investigation focuses on three different aspects: the need of a precise modeling when a wind turbine is operating close to resonant conditions; the importance of estimating wind...... turbine loads also at low turbulence intensity wind conditions to identify the presence of resonances; and the wind turbine response because of external excitations. In the first analysis, three different wind turbine models are analysed with respect to the frequency and damping of the aeroelastic modes....... Fatigue loads on the same models are then investigated with two different turbulence intensities to analyse the wind turbine response. In the second analysis, a wind turbine model is excited with an external force. This analysis helps in identifying the modes that might be excited, and therefore...

  11. Prototype observation and influencing factors of environmental vibration induced by flood discharge

    Directory of Open Access Journals (Sweden)

    Xin Wang

    2017-01-01

    Full Text Available Due to a wide range of field vibration problems caused by flood discharge at the Xiangjiaba Hydropower Station, vibration characteristics and influencing factors were investigated based on prototype observation. The results indicate that field vibrations caused by flood discharge have distinctive characteristics of constancy, low frequency, small amplitude, and randomness with impact, which significantly differ from the common high-frequency vibration characteristics. Field vibrations have a main frequency of about 0.5–3.0 Hz and the characteristics of long propagation distance and large-scale impact. The vibration of a stilling basin slab runs mainly in the vertical direction. The vibration response of the guide wall perpendicular to the flow is significantly stronger than it is in other directions and decreases linearly downstream along the guide wall. The vibration response of the underground turbine floor is mainly caused by the load of unit operation. Urban environmental vibration has particular distribution characteristics and change patterns, and is greatly affected by discharge, scheduling modes, and geological conditions. Along with the increase of the height of residential buildings, vibration responses show a significant amplification effect. The horizontal and vertical vibrations of the 7th floor are, respectively, about 6 times and 1.5 times stronger than the corresponding vibrations of the 1st floor. The vibration of a large-scale chemical plant presents the combined action of flood discharge and working machines. Meanwhile, it is very difficult to reduce the low-frequency environmental vibrations. Optimization of the discharge scheduling mode is one of the effective measures of reducing the flow impact loads at present. Choosing reasonable dam sites is crucial.

  12. Local orientational order in liquids revealed by resonant vibrational energy transfer

    NARCIS (Netherlands)

    Panman, M.R.; Shaw, D.J.; Ensing, B.; Woutersen, S.

    2014-01-01

    We demonstrate that local orientational ordering in a liquid can be observed in the decay of the vibrational anisotropy caused by resonant transfer of vibrational excitations between its constituent molecules. We show that the functional form of this decay is determined by the (distribution of)

  13. Vibrational Sensing in Marine Invertebrates

    Science.gov (United States)

    1997-09-30

    VIBRATIONAL SENSING IN MARINE INVERTEBRATES Peter A. Jumars School of Oceanography University of Washington Box 357940 Seattle, WA 98195-7940 (206...DATES COVERED 00-00-1997 to 00-00-1997 4. TITLE AND SUBTITLE Vibrational Sensing in Marine Invertebrates 5a. CONTRACT NUMBER 5b. GRANT NUMBER

  14. Vibrations and Stability: Solved Problems

    DEFF Research Database (Denmark)

    Thomsen, Jon Juel

    Worked out solutions for exercise problems in J. J. Thomsen 'Vibrations and Stability: Advanced Theory, Analysis, and Tools', Springer, Berlin - Heidelberg, 2003.......Worked out solutions for exercise problems in J. J. Thomsen 'Vibrations and Stability: Advanced Theory, Analysis, and Tools', Springer, Berlin - Heidelberg, 2003....

  15. Detection of crack in a shallow layer of mortar by using a harmonic component of very high intensity aerial ultrasonic waves

    Science.gov (United States)

    Osumi, Ayumu; Ogita, Masashi; Okitsu, Kazuya; Ito, Youichi

    2017-07-01

    We developed a noncontact, nondestructive method of imaging defects in solid objects with high-intensity aerial ultrasonic waves and optical equipment. The method detects defects in the imaged area by analyzing the velocity distribution on the surface of an object continuously irradiated with aerial ultrasonic waves. In this study, we attempted to detect a crack in a shallow layer of mortar. We used the nonlinearity of high-intensity sound waves and we imaged a rectangular defect imitating a crack (width: 1 mm) using harmonic components of the vibration velocity. Our method successfully imaged the rectangular defect, showing the possibility of its application to the detection of actual cracks.

  16. Vibrational study, first hyperpolarizability and HOMO-LUMO analyses on the structure of 2-hydroxy-6-nitro toluene

    Science.gov (United States)

    Arivazhagan, M.; Thilagavathi, G.

    2012-06-01

    Vibrational spectral measurements, namely, FT-infrared (4000-400 cm-1) and FT-Raman (3500-50 cm-1) spectra have been made for 2-hydroxy-6-nitrotoluene (HNT) and assigned to different normal modes of the molecule. Quantum chemical calculations of energies, geometrical structure, harmonic vibrational frequencies intensities and vibrational wavenumbers of HNT were carried out by ab initio HF and density functional theory (DFT/B3LYP) method with 6-311++G(d,p) basis set. The differences between the observed and scaled wave number values of most of the fundamentals are very small. The values of the total dipole moment (μ) and first hyperpolarizability (β) of the investigated molecule were computed by using ab initio HF and density functional theory (DFT/B3LYP) methods with 6-311++G(d,p) basis set quantum mechanical calculations. The calculated results also show that the HNT molecule might have microscopic nonlinear optical (NLO) behavior with non-zero values. A detailed interpretation of the infrared and Raman spectra of HNT is also reported based on total energy distribution (TED). The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. The results of the calculations were applied to simulated infrared and Raman spectra of the title compound which showed excellent agreement with the observed spectra.

  17. Ionization of oriented targets by intense circularly polarized laser pulses: Imprints of orbital angular nodes in the two-dimensional momentum distribution

    DEFF Research Database (Denmark)

    Martiny, Christian; Abu-Samha, Mahmoud; Madsen, Lars Bojer

    2010-01-01

    We solve the three-dimensional time-dependent Schrödinger equation for a few-cycle circularly polarized femtosecond laser pulse that interacts with an oriented target exemplified by an argon atom, initially in a 3px or 3py state. The photoelectron momentum distributions show distinct signatures...

  18. The origins of vibration theory

    Science.gov (United States)

    Dimarogonas, A. D.

    1990-07-01

    The Ionian School of natural philosophy introduced the scientific method of dealing with natural phenomena and the rigorous proofs for abstract propositions. Vibration theory was initiated by the Pythagoreans in the fifth century BC, in association with the theory of music and the theory of acoustics. They observed the natural frequency of vibrating systems and proved that it is a system property and that it does not depend on the excitation. Pythagoreans determined the fundamental natural frequencies of several simple systems, such as vibrating strings, pipes, vessels and circular plates. Aristoteles and the Peripatetic School founded mechanics and developed a fundamental understanding of statics and dynamics. In Alexandrian times there were substantial engineering developments in the field of vibration. The pendulum as a vibration, and probably time, measuring device was known in antiquity, and was further developed by the end of the first millennium AD.

  19. The influence of temperature on the distribution and intensity of the reaction product in rat muscle fibers obtained with the histochemical method for myosin ATPase

    DEFF Research Database (Denmark)

    Kirkeby, S; Tuxen, A

    1989-01-01

    was raised and in others was depressed by alteration of the incubation temperature. There was no obvious correlation between the temperature sensitivity of ATPase in the muscle fibers and their activity for succinic dehydrogenase. It is proposed that the histochemical method for myosin ATPase can be used......The influence of temperature in the incubation medium on the localization and intensity of myosin ATPase was investigated in striated muscles from the rat using a conventional histochemical technique. It was found that the enzyme reaction was temperature-dependent since the activity in some fibers...... for demonstration of isoenzymes in striated muscle fibers....

  20. Vibrational kinetics of electronically excited states in H2 discharges

    Science.gov (United States)

    Colonna, Gianpiero; Pietanza, Lucia D.; D'Ammando, Giuliano; Celiberto, Roberto; Capitelli, Mario; Laricchiuta, Annarita

    2017-11-01

    The evolution of atmospheric pressure hydrogen plasma under the action of repetitively ns electrical pulse has been investigated using a 0D state-to-state kinetic model that self-consistently couples the master equation of heavy particles and the Boltzmann equation for free electrons. The kinetic model includes, together with atomic hydrogen states and the vibrational kinetics of H2 ground state, vibrational levels of singlet states, accounting for the collisional quenching, having a relevant role because of the high pressure. The mechanisms of excitations, radiative decay and collisional quenching involving the excited H2 states and the corresponding cross sections, integrated over the non-equilibrium electron energy distribution function (EEDF) to obtain kinetic rates, are discussed in the light of the kinetic simulation results, i.e. the time evolution during the pulse of the plasma composition, of the EEDF and of the vibrational distributions of ground and singlet excited states.

  1. Local vibrations and lift performance of low Reynolds number airfoil

    Directory of Open Access Journals (Sweden)

    TariqAmin Khan

    2017-06-01

    Full Text Available The 2D incompressible Navier-Stokes equations are solved based on the finite volume method and dynamic mesh technique is used to carry out partial fluid structure interaction. The local flexible structure (hereinafter termed as flexible structure vibrates in a single mode located on the upper surface of the airfoil. The Influence of vibration frequency and amplitude are examined and the corresponding fluid flow characteristics are investigated which add complexity to the inherent problem in unsteady flow. The study is conducted for flow over NACA0012 airfoil at 600≤Re≤3000 at a low angle of attack. Vibration of flexible structure induces a secondary vortex which modifies the pressure distribution and lift performance of the airfoil. At some moderate vibration amplitude, frequency synchronization or lock-in phenomenon occurs when the vibration frequency is close to the characteristic frequency of rigid airfoil. Evolution and shedding of vortices corresponding to the deformation of flexible structure depends on the Reynolds number. In the case of Re≤1000, the deformation of flexible structure is considered in-phase with the vortex shedding i.e., increasing maximum lift is linked with the positive deformation of flexible structure. At Re=1500 a phase shift of about 1/π exists while they are out-of-phase at Re>1500. Moreover, the oscillation amplitude of lift coefficient increases with increasing vibration amplitude for Re≤1500 while it decreases with increasing vibration amplitude for Re>1500. As a result of frequency lock-in, the average lift coefficient is increased with increasing vibration amplitude for all investigated Reynolds numbers (Re. The maximum increase in the average lift coefficient is 19.72% within the range of investigated parameters.

  2. Non-linear optical crystal vibration sensing device

    Energy Technology Data Exchange (ETDEWEB)

    Kalibjian, R.

    1992-12-31

    The report describes a non-linear optical crystal vibration sensing device including a photorefractive crystal and a laser. The laser produces a coherent light beam which is split by a beam splitter into a first laser beam and a second laser beam. After passing through the crystal the first laser beam is counter-propagated back upon itself by a retro-mirror, creating a third laser beam . The laser beams are modulated, due to the mixing effect within the crystal by vibration of the crystal. In the third laser beam modulation is stable and such modulation is converted by a photodetector into a usable electrical output, intensity modulated in accordance with vibration applied to the crystal.

  3. Non-linear optical crystal vibration sensing device

    Science.gov (United States)

    Kalibjian, R.

    1994-08-09

    A non-linear optical crystal vibration sensing device including a photorefractive crystal and a laser is disclosed. The laser produces a coherent light beam which is split by a beam splitter into a first laser beam and a second laser beam. After passing through the crystal the first laser beam is counter-propagated back upon itself by a retro-mirror, creating a third laser beam. The laser beams are modulated, due to the mixing effect within the crystal by vibration of the crystal. In the third laser beam, modulation is stable and such modulation is converted by a photodetector into a usable electrical output, intensity modulated in accordance with vibration applied to the crystal. 3 figs.

  4. Time-series analysis of vibrational nuclear wave packet dynamics

    Science.gov (United States)

    Thumm, Uwe; Niederhausen, Thomas; Feuerstein, Bernold

    2008-10-01

    We discuss the extent to which measured time-dependent fragment kinetic energy release (KER) spectra and calculated nuclear probability densities can reveal 1) the transition frequencies between stationary vibrational states, 2) the nodal structure of stationary vibrational states, 3) the ground-state adiabatic electronic potential curve of the molecular ion, and 4) the progression of decoherence induced by random interactions with the environment. We illustrate our discussion with numerical simulations for the time-dependent nuclear motion of vibrational wave packets in the D2^+ molecular ion caused by the ionization of its neutral D2 parent molecule with an intense pump laser pulse. Based on a harmonic time-series analysis, we suggest a general scheme for the full reconstruction, up to an overall phase factor, of the initial wave packets based on measured KER spectra, cf., Phys. Rev. A 77, 063401 (2008).

  5. Degassing of molten alloys with the assistance of ultrasonic vibration

    Science.gov (United States)

    Han, Qingyou; Xu, Hanbing; Meek, Thomas T.

    2010-03-23

    An apparatus and method are disclosed in which ultrasonic vibration is used to assist the degassing of molten metals or metal alloys thereby reducing gas content in the molten metals or alloys. High-intensity ultrasonic vibration is applied to a radiator that creates cavitation bubbles, induces acoustic streaming in the melt, and breaks up purge gas (e.g., argon or nitrogen) which is intentionally introduced in a small amount into the melt in order to collect the cavitation bubbles and to make the cavitation bubbles survive in the melt. The molten metal or alloy in one version of the invention is an aluminum alloy. The ultrasonic vibrations create cavitation bubbles and break up the large purge gas bubbles into small bubbles and disperse the bubbles in the molten metal or alloy more uniformly, resulting in a fast and clean degassing.

  6. Sunlight-Initiated Photochemistry: Excited Vibrational States of Atmospheric Chromophores

    Directory of Open Access Journals (Sweden)

    Veronica Vaida

    2008-01-01

    Full Text Available Atmospheric chemical reactions are often initiated by ultraviolet (UV solar radiation since absorption in that wavelength range coincides to typical chemical bond energies. In this review, we present an alternative process by which chemical reactions occur with the excitation of vibrational levels in the ground electronic state by red solar photons. We focus on the O–H vibrational manifold which can be an atmospheric chromophore for driving vibrationally mediated overtone-induced chemical reactions. Experimental and theoretical O–H intensities of several carboxylic acids, alcohols, and peroxides are presented. The importance of combination bands in spectra at chemically relevant energies is examined in the context of atmospheric photochemistry. Candidate systems for overtone-initiated chemistry are provided, and their lowest energy barrier for reaction and the minimum quanta of O–H stretch required for reaction are calculated. We conclude with a discussion of the major pathways available for overtone-induced reactions in the atmosphere.

  7. Modelling of magnetostriction of transformer magnetic core for vibration analysis

    Directory of Open Access Journals (Sweden)

    Marks Janis

    2017-12-01

    Full Text Available Magnetostriction is a phenomenon occurring in transformer core in normal operation mode. Yet in time, it can cause the delamination of magnetic core resulting in higher level of vibrations that are measured on the surface of transformer tank during diagnostic tests. The aim of this paper is to create a model for evaluating elastic deformations in magnetic core that can be used for power transformers with intensive vibrations in order to eliminate magnetostriction as a their cause. Description of the developed model in Matlab and COMSOL software is provided including restrictions concerning geometry and properties of materials, and the results of performed research on magnetic core anisotropy are provided. As a case study modelling of magnetostriction for 5-legged 200 MVA power transformer with the rated voltage of 13.8/137kV is conducted, based on which comparative analysis of vibration levels and elastic deformations is performed.

  8. Distribution of Escherichia coli O157:H7 in ground beef: Assessing the clustering intensity for an industrial-scale grinder and a low and localized initial contamination.

    Science.gov (United States)

    Loukiadis, Estelle; Bièche-Terrier, Clémence; Malayrat, Catherine; Ferré, Franck; Cartier, Philippe; Augustin, Jean-Christophe

    2017-06-05

    Undercooked ground beef is regularly implicated in food-borne outbreaks involving pathogenic Shiga toxin-producing Escherichia coli. The dispersion of bacteria during mixing processes is of major concern for quantitative microbiological risk assessment since clustering will influence the number of bacteria the consumers might get exposed to as well as the performance of sampling plans used to detect contaminated ground beef batches. In this study, batches of 25kg of ground beef were manufactured according to a process mimicking an industrial-scale grinding with three successive steps: primary grinding, mixing and final grinding. The ground beef batches were made with 100% of chilled trims or with 2/3 of chilled trims and 1/3 of frozen trims. Prior grinding, one beef trim was contaminated with approximately 10(6)-10(7)CFU of E. coli O157:H7 on a surface of 0.5cm(2) to reach a concentration of 10-100cells/g in ground beef. The E. coli O157:H7 distribution in ground beef was characterized by enumerating 60 samples (20 samples of 5g, 20 samples of 25g and 20 samples of 100g) and fitting a Poisson-gamma model to describe the variability of bacterial counts. The shape parameter of the gamma distribution, also known as the dispersion parameter reflecting the amount of clustering, was estimated between 1.0 and 1.6. This k-value of approximately 1 expresses a moderate level of clustering of bacterial cells in the ground beef. The impact of this clustering on the performance of sampling strategies was relatively limited in comparison to the classical hypothesis of a random repartition of pathogenic cells in mixed materials (purely Poisson distribution instead of Poisson-gamma distribution). Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Comparison of the dose distribution obtained from dosimetric systems with intensity modulated radiotherapy planning system in the treatment of prostate cancer

    Energy Technology Data Exchange (ETDEWEB)

    Gökçe, M., E-mail: mgokce@adu.edu.tr; Uslu, D. Koçyiğit [Adnan Menderes University Faculty of Arts and Sciences, Department of Physics, Aydın (Turkey); Ertunç, C. [Pamukkale University Faculty of Medicine, Department of Radiation Oncology, Denizli (Turkey); Karalı, T. [Ege University Institute of Nuclear Sciences, Izmir (Turkey)

    2016-03-25

    The aim of this study is to compare Intensity Modulated Radiation Therapy (IMRT) plan of prostate cancer patients with different dose verification systems in dosimetric aspects and to compare these systems with each other in terms of reliability, applicability and application time. Dosimetric control processes of IMRT plan of three prostate cancer patients were carried out using thermoluminescent dosimeter (TLD), ion chamber (IC) and 2D Array detector systems. The difference between the dose values obtained from the dosimetric systems and treatment planning system (TPS) were found to be about % 5. For the measured (TLD) and calculated (TPS) doses %3 percentage differences were obtained for the points close to center while percentage differences increased at the field edges. It was found that TLD and IC measurements will increase the precision and reliability of the results of 2D Array.

  10. Sound intensity

    DEFF Research Database (Denmark)

    Crocker, Malcolm J.; Jacobsen, Finn

    1998-01-01

    This chapter is an overview, intended for readers with no special knowledge about this particular topic. The chapter deals with all aspects of sound intensity and its measurement from the fundamental theoretical background to practical applications of the measurement technique.......This chapter is an overview, intended for readers with no special knowledge about this particular topic. The chapter deals with all aspects of sound intensity and its measurement from the fundamental theoretical background to practical applications of the measurement technique....

  11. Sound Intensity

    DEFF Research Database (Denmark)

    Crocker, M.J.; Jacobsen, Finn

    1997-01-01

    This chapter is an overview, intended for readers with no special knowledge about this particular topic. The chapter deals with all aspects of sound intensity and its measurement from the fundamental theoretical background to practical applications of the measurement technique.......This chapter is an overview, intended for readers with no special knowledge about this particular topic. The chapter deals with all aspects of sound intensity and its measurement from the fundamental theoretical background to practical applications of the measurement technique....

  12. Energy expenditure and substrate utilization during whole body vibration

    Directory of Open Access Journals (Sweden)

    Ravena Santos Raulino

    2015-04-01

    Full Text Available INTRODUCTION AND OBJECTIVE: the aim of this study was to investigate whether the addition of vibration during interval training would raise oxygen consumption VO2 to the extent necessary for weight management and to evaluate the influence of the intensity of the vibratory stimulus for prescribing the exercise program in question. METHODS: VO2, measured breath by breath, was evaluated at rest and during the four experimental conditions to determine energy expenditure, metabolic equivalent MET, respiratory exchange ratio RER, % Kcal from fat, and rate of fat oxidation. Eight young sedentary females age 22±1 years, height 163.88± 7.62 cm, body mass 58.35±10.96 kg, and VO2 max 32.75±3.55 mLO2.Kg-1.min-1 performed interval training duration = 13.3 min to the upper and lower limbs both with vibration 35 Hz and 2 mm, 40 Hz and 2 mm, 45 Hz and 2 mm and without vibration. The experimental conditions were randomized and balanced at an interval of 48 hours. RESULTS: the addition of vibration to exercise at 45 Hz and 2 mm resulted in an additional increase of 17.77±12.38% of VO2 compared with exercise without vibration. However, this increase did not change the fat oxidation rate p=0.42 because intensity of exercise 29.1±3.3 %VO2max, 2.7 MET was classified as mild to young subjects. CONCLUSION: despite the influence of vibration on VO2 during exercise, the increase was insufficient to reduce body weight and did not reach the minimum recommendation of exercise prescription for weight management for the studied population.

  13. Vibration response of misaligned rotors

    Science.gov (United States)

    Patel, Tejas H.; Darpe, Ashish K.

    2009-08-01

    Misalignment is one of the common faults observed in rotors. Effect of misalignment on vibration response of coupled rotors is investigated in the present study. The coupled rotor system is modelled using Timoshenko beam elements with all six dof. An experimental approach is proposed for the first time for determination of magnitude and harmonic nature of the misalignment excitation. Misalignment effect at coupling location of rotor FE model is simulated using nodal force vector. The force vector is found using misalignment coupling stiffness matrix, derived from experimental data and applied misalignment between the two rotors. Steady-state vibration response is studied for sub-critical speeds. Effect of the types of misalignment (parallel and angular) on the vibration behaviour of the coupled rotor is examined. Along with lateral vibrations, axial and torsional vibrations are also investigated and nature of the vibration response is also examined. It has been found that the misalignment couples vibrations in bending, longitudinal and torsional modes. Some diagnostic features in the fast Fourier transform (FFT) of torsional and longitudinal response related to parallel and angular misalignment have been revealed. Full spectra and orbit plots are effectively used to reveal the unique nature of misalignment fault leading to reliable misalignment diagnostic information, not clearly brought out by earlier studies.

  14. Vibrationally excited state stectroscopy of radicals in a supersonic plasma

    NARCIS (Netherlands)

    G. Bazalgette Courreges-Lacoste, J. Bulthuis, S. Stolte, T. Motylewski; Linnartz, H.V.J.

    2001-01-01

    A plasma source based on a multilayer discharge geometry in combination with a time-of-flight REMPI experiment is used to study rotationally cold spectra of highly excited vibrational states of mass selected radicals. The rovibrational state distributions upon discharge excitation are characterised

  15. Technical Note. A Clamped Bar Model for the Sompoton Vibrator

    National Research Council Canada - National Science Library

    Tee Hao Wong; Jedol Dayou; M.C.D. Ngu; Jackson H.W. Chang; Willey Y.H. Liew

    2013-01-01

    .... In this paper, the vibrator is modeled as a clamped bar with a uniformly distributed mass. By means of this model, the fundamental frequency is analyzed with the use of an equivalent single degree of freedom system (SDOF) and exact analysis...

  16. Post-stressed concrete foundation may reduce machinery vibration

    Science.gov (United States)

    Fistedis, S. H.

    1967-01-01

    Post-stressing concrete mat foundation reduces excessive vibrations in machinery. The mat is stressed in compression after the machinery is mounted, thus closing any cracks in it, altering the distribution of the soil subgrade reaction on the mat, and changing the mat-subgrade natural frequency.

  17. Molecular vibrations the theory of infrared and Raman vibrational spectra

    CERN Document Server

    Wilson, E Bright; Cross, Paul C

    1980-01-01

    Pedagogical classic and essential reference focuses on mathematics of detailed vibrational analyses of polyatomic molecules, advancing from application of wave mechanics to potential functions and methods of solving secular determinant.

  18. Acceleration of the reaction OH + CO → H + CO2 by vibrational excitation of OH.

    Science.gov (United States)

    Kohno, Nanase; Izumi, Mari; Kohguchi, Hiroshi; Yamasaki, Katsuyoshi

    2011-05-19

    The collision complex formed from a vibrationally excited reactant undergoes redissociation to the reactant, intramolecular vibrational relaxation (randomization of vibrational energy), or chemical reaction to the products. If attractive interaction between the reactants is large, efficient vibrational relaxation in the complex prevents redissociation to the reactants with the initial vibrational energy, and the complex decomposes to the reactants with low vibrational energy or converts to the products. In this paper, we have studied the branching ratios between the intramolecular vibrational relaxation and chemical reaction of an adduct HO(v)-CO formed from OH(X(2)Π(i)) in different vibrational levels v = 0-4 and CO. OH(v = 0-4) generated in a gaseous mixture of O(3)/H(2)/CO/He irradiated at 266 nm was detected with laser-induced fluorescence (LIF) via the A(2)Σ(+)-X(2)Π(i) transition, and H atoms were probed by the two-photon excited LIF technique. From the kinetic analysis of the time-resolved LIF intensities of OH(v) and H, we have found that the intramolecular vibrational relaxation is mainly governed by a single quantum change, HO(v)-CO → HO(v-1)-CO, followed by redissociation to OH(v-1) and CO. With the vibrational quantum number v, chemical process from the adduct to H + CO(2) is accelerated, and vibrational relaxation is decelerated. The countertrend is elucidated by the competition between chemical reaction and vibrational relaxation in the adduct HOCO.

  19. Avoid heat transfer equipment vibration

    Energy Technology Data Exchange (ETDEWEB)

    Ganapathy, V.

    1987-06-01

    Tube bundles in heat exchangers, boilers, superheaters and heaters are often subject to vibration and noise problems. Vibration can lead to tube thinning and wear, resulting in tube failures. Excessive noise can be a problem to plant operating personnel. Large gas pressure drop across the equipment is also a side effect, which results in large operating costs. With the design checks presented in this paper, one can predict during design if problems associated with noise and vibration are likely to occur in petroleum refineries.

  20. Application of COMSOL Multiphysics in Thermal Effect Analysis of Electromagnetic Active Vibration Absorber

    Science.gov (United States)

    Hang, Su; Xue-tao, Weng

    2017-11-01

    At present, there are some researches in the thermal analysis of electromagnetic absorbers. The heating principle of electromagnetic absorber magnetic circuit is analysed, and the finite element method is used to numerically solve the temperature field in the working process of electromagnetic vibration absorber. The magnetic circuit simulation model of electromagnetic vibration absorber is established in Comsol Multiphysics finite element analysis software. And the grid Division, simulation analysis of the vibration absorber magnetic circuit structure of the internal temperature distribution, you can get the vibration absorber magnetic circuit in the working process of the temperature field of two-dimensional distribution graphics and magnetic circuit structure of different parts of the temperature rise contrast chart. The conclusion provides some theoretical reference for the design and research of electromagnetic active vibration absorber.

  1. Optical Fourier transform based in-plane vibration characterization for MEMS comb structure.

    Science.gov (United States)

    Gao, Yongfeng; Cao, Liangcai; You, Zheng; Zhao, Jiahao; Zhang, Zichen; Yang, Jianzhong

    2013-02-25

    On-line and on-wafer characterizations of mechanical properties of Micro-Electro-Mechanical-System (MEMS) with efficiency are very important to the mass production of MEMS foundry in the near future. However, challenges still remain. In this paper, we present an in-plane vibration characterizing method for MEMS comb using optical Fourier transform (OFT). In the experiment, the intensity distribution at the focal plane was captured to characterize the displacement of the vibrator in the MEMS comb structure. A typical MEMS comb was tested to verify the principle. The shape and the movement of MEMS comb was imitated and tested to calibrate the measurement by using a spatial light modulator (SLM). The relative standard deviations (RSD) of the measured displacements were better than 5%, where the RSD is defined as the ratio of the standard deviation to the mean. It is convinced that the presented method is feasible for on-line and on-wafer characterizations for MEMS with great convenience, high efficiency and low cost.

  2. Vibrational spectroscopic analysis of aluminum phthalocyanine chloride. experimental and DFT study

    Energy Technology Data Exchange (ETDEWEB)

    Soliman, I.M., E-mail: solidhima@gmail.com [Physics Department, Faculty of Science, Ain Shams University, Abbasia, Cairo (Egypt); El-Nahass, M.M. [Physics Department, Faculty of Education, Ain Shams University, Roxy, Cairo (Egypt); Eid, Kh.M. [Physics Department, Faculty of Education, Ain Shams University, Roxy, Cairo (Egypt); Physics department, Bukairiayh for Sciences & Arts, Quassim University, Quassim (Saudi Arabia); Ammar, H.Y. [Physics Department, Faculty of Arts and science, Najran University, Najran (Saudi Arabia)

    2016-06-15

    In this work, we report a combined experimental and theoretical study of aluminum phthalocyanine chloride (AlPcCl). The FT-IR and Raman spectra of AlPcCl were recorded and analyzed. The density functional theory (DFT) computations have been performed at B3LYP/6-31g and B3LYP/6-311g to derive equilibrium geometry, vibrational wavenumbers, intensity and NLO properties. All the observed vibrational bands have been discussed and assigned to normal mode or to combinations on the basis of our DFT calculations as a primary source of attribution and also by comparison with the previous results for similar compounds. The natural bond orbital (NBO) calculations were performed to study the atomic charge distribution of the investigated compound. The calculated results showed that dipole moment of the investigated compound was 4.68 Debye and HOMO-LUMO energy gap was 2.14 eV. The lowering of frontier orbital gap appears to be the cause of its enhanced charge transfer interaction.

  3. Determining temperature distribution in tissue in the focal plane of the high (>100 W/cm(2)) intensity focused ultrasound beam using phase shift of ultrasound echoes.

    Science.gov (United States)

    Karwat, Piotr; Kujawska, Tamara; Lewin, Peter A; Secomski, Wojciech; Gambin, Barbara; Litniewski, Jerzy

    2016-02-01

    In therapeutic applications of High Intensity Focused Ultrasound (HIFU) the guidance of the HIFU beam and especially its focal plane is of crucial importance. This guidance is needed to appropriately target the focal plane and hence the whole focal volume inside the tumor tissue prior to thermo-ablative treatment and beginning of tissue necrosis. This is currently done using Magnetic Resonance Imaging that is relatively expensive. In this study an ultrasound method, which calculates the variations of speed of sound in the locally heated tissue volume by analyzing the phase shifts of echo-signals received by an ultrasound scanner from this very volume is presented. To improve spatial resolution of B-mode imaging and minimize the uncertainty of temperature estimation the acoustic signals were transmitted and received by 8 MHz linear phased array employing Synthetic Transmit Aperture (STA) technique. Initially, the validity of the algorithm developed was verified experimentally in a tissue-mimicking phantom heated from 20.6 to 48.6 °C. Subsequently, the method was tested using a pork loin sample heated locally by a 2 MHz pulsed HIFU beam with focal intensity ISATA of 129 W/cm(2). The temperature calibration of 2D maps of changes in the sound velocity induced by heating was performed by comparison of the algorithm-determined changes in the sound velocity with the temperatures measured by thermocouples located in the heated tissue volume. The method developed enabled ultrasound temperature imaging of the heated tissue volume from the very inception of heating with the contrast-to-noise ratio of 3.5-12 dB in the temperature range 21-56 °C. Concurrently performed, conventional B-mode imaging revealed CNR close to zero dB until the temperature reached 50 °C causing necrosis. The data presented suggest that the proposed method could offer an alternative to MRI-guided temperature imaging for prediction of the location and extent of the thermal lesion prior to applying the

  4. Exposure to vibrations in wine growing

    Directory of Open Access Journals (Sweden)

    Domenico Pessina

    2013-09-01

    Full Text Available Apart the winter period, the activity in specialized agricultural cultivations (i.e. wine- and fruit-growing is distributed for a long period of the year. Some tasks, such as pesticide distribution, are repeated several times during the growing season. On the other hand, mechanization is one of the pillars on which is based the modern agriculture management. As a consequence, in wine growing the tractor driver has to be considered a worker potentially subjected to high level of vibrations, due to the poor machinery conditions often encountered, and sometimes to the rough soil surface of the vineyard combined with the high travelling speed adopted in carrying out many operations. About vibrations, the Italian Decree 81/08 basically refers to the European Directive 2002/44/CE, that provides some very strict limits of exposure, both for whole body and hand-arm districts. In Oltrepo pavese, a large hilly area located the south part of the Pavia province (Lombardy - Italy wine growing is the main agricultural activity; for this reason, a detailed survey on the vibration levels recorded at the tractor driver’s seat was carried out, in order to ascertain the real risk to which the operators are exposed. The activity in wine growing has been classified into 6 groups of similar tasks, as follows: 1. canopy management: pruning, trimming, binding, stripping, etc.; 2. soil management: harrowing, hoeing, subsoiling etc.; 3. inter-row management: chopping of pruning , pinching, grass mowing, etc.; 4. crop protection: pesticides and fungicides distribution, sulfidation, foliar fertilization, etc.; 5. grape harvesting: manual or mechanical; 6. transport: from the vineyard to the cellar. For each group of tasks, the vibration levels on 3 the traditional axes (x, y and z were recorded, and then an exposure time was calculated for each of them, in order to ascertain the risk level in comparison to what provided by the dedicated standard. Finally, a detailed

  5. Hydrogen Bonding and Vibrational Spectroscopy: A Theoretical Study

    Science.gov (United States)

    Chaban, Galina M.

    2005-01-01

    Effects of hydrogen bonding on vibrational spectra are studied for several hydrogen-bonded complexes, in which hydrogen bonding ranges from weak (25 kcal/mol). The systems studied include complexes of inorganic acids and salts with water and ammonia, as well as complexes of several organic molecules (nitriles and amino acids) with water. Since anharmonic effects are very strong in hydrogen-bonded systems, anharmonic vibrational frequencies and infrared intensities are computed using the correlation-corrected vibrational self-consistent field (CC-VSCF) method with ab initio potential surfaces at the MP2 and CCSD(T) levels. The most common spectral effects induced by hydrogen bonding are red shifts of stretching vibrational frequencies ranging from approx.200/cm to over 2000/cm and significant increases of infrared intensities for those bonds that participate in hydrogen bonding. However, some systems (e.g. nitrile-water complexes) exhibit shifts in the opposite direction (to the blue) upon formation of hydrogen bonds.

  6. 14 CFR 33.63 - Vibration.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Vibration. 33.63 Section 33.63 Aeronautics... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.63 Vibration. Each engine... because of vibration and without imparting excessive vibration forces to the aircraft structure. ...

  7. 14 CFR 33.83 - Vibration test.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Vibration test. 33.83 Section 33.83... STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.83 Vibration test. (a) Each engine must undergo vibration surveys to establish that the vibration characteristics of those components that...

  8. 14 CFR 33.33 - Vibration.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Vibration. 33.33 Section 33.33 Aeronautics... STANDARDS: AIRCRAFT ENGINES Design and Construction; Reciprocating Aircraft Engines § 33.33 Vibration. The... vibration and without imparting excessive vibration forces to the aircraft structure. ...

  9. 14 CFR 33.43 - Vibration test.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Vibration test. 33.43 Section 33.43... STANDARDS: AIRCRAFT ENGINES Block Tests; Reciprocating Aircraft Engines § 33.43 Vibration test. (a) Each engine must undergo a vibration survey to establish the torsional and bending vibration characteristics...

  10. 49 CFR 178.819 - Vibration test.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Vibration test. 178.819 Section 178.819... Testing of IBCs § 178.819 Vibration test. (a) General. The vibration test must be conducted for the... vibration test. (b) Test method. (1) A sample IBC, selected at random, must be filled and closed as for...

  11. Rectangular Parallelepiped Vibration in Plane Strain State

    OpenAIRE

    Hanckowiak, Jerzy

    2004-01-01

    In this paper we present a vibration spectrum of a homogenous parallelepiped (HP) under the action of volume and surface forces resulting from the exponent displacements entering the Fourier transforms. Vibration under the action of axial surface tractions and the free vibration are described separately. A relationship between the high frequency vibration and boundary conditions (BC) is also considered.

  12. Vibrational analysis of dibenzo-18-crown-6. Effect of dispersion correction on the calculated vibrational spectra

    Science.gov (United States)

    Al-Jallal, Nada A.; El-Azhary, Adel A.

    2017-09-01

    We report for the first time a detailed vibrational analysis of dibenzo-18-crown-6, db18c6. The experimental IR and Raman spectra of db18c6 were measured. The assignment of the fundamental vibrational frequencies of db18c6 was aided by using scaled quantum mechanical force fields calculated at the B3LYP/6-311G** and CAM-B3LYP/6-311G** levels. Comparison between the experimental and calculated spectra of some of the important conformations of db18c6 led to the conclusion that db18c6 in the solid phase exists in a C2 conformation that is similar to that predicted by X-ray, for also the solid phase. The effect of inclusion of the atom pair-wise dispersion correction to the B3LYP method, known as the B3LYP-D3 method, on the calculated IR and Raman spectra of db18c6 at the B3LYP level was also investigated. It was concluded that the effect of inclusion of the dispersion correction on the calculated vibrational frequencies and intensities is negligible.

  13. Effect of vibration on muscle strength imbalance in lower extremity using multi-control whole body vibration platform.

    Science.gov (United States)

    Yu, Chang Ho; Seo, Shin Bae; Kang, Seung Rok; Kim, Kyung; Kwon, Tae Kyu

    2015-01-01

    This study shows the improvement of muscle activity and muscle strength imbalance in the lower extremities through independent exercise loads in vibration platform. Twenty females of age 20 participated in this study. The subjects were divided into WBV group, with more than 10% of muscle strength imbalance between left and right the lower extremities, and control group, with less than 10% of muscle strength imbalance between left and right the lower extremities. As the prior experiment showed, different exercise postures provide different muscular activities. As a result, the highest muscular activity was found to be in the low squat posture. Therefore, the LS posture was selected for the exercise in this experiment. Vibration intensities were applied to dominant muscle and non-dominant muscle, and the vibration frequency was fixed at 25Hz for the WBV group. The control group was asked to perform the same exercise as the WBV group, without stimulated vibration. This exercise was conducted for a total of 4 weeks. As a result, the WBV group which showed an average deviation of 16% before the experiment, tended to decrease approximately to 5%. In this study, vibration exercise using load deviation is shown to be effective in improving the muscle strength imbalance.

  14. COMBIT: protocol of a randomised comparison trial of COMbined modified constraint induced movement therapy and bimanual intensive training with distributed model of standard upper limb rehabilitation in children with congenital hemiplegia

    Science.gov (United States)

    2013-01-01

    Introduction Children with congenital hemiplegia often present with limitations in using their impaired upper limb which impacts on independence in activities of daily living, societal participation and quality of life. Traditional therapy has adopted a bimanual training approach (BIM) and more recently, modified constraint induced movement therapy (mCIMT) has emerged as a promising unimanual approach. Evidence of enhanced neuroplasticity following mCIMT suggests that the sequential application of mCIMT followed by bimanual training may optimise outcomes (Hybrid CIMT). It remains unclear whether more intensely delivered group based interventions (hCIMT) are superior to distributed models of individualised therapy. This study aims to determine the optimal density of upper limb training for children with congenital hemiplegia. Methods and analyses A total of 50 children (25 in each group) with congenital hemiplegia will be recruited to participate in this randomized comparison trial. Children will be matched in pairs at baseline and randomly allocated to receive an intensive block group hybrid model of combined mCIMT followed by intensive bimanual training delivered in a day camp model (COMBiT; total dose 45 hours direct, 10 hours of indirect therapy), or a distributed model of standard occupational therapy and physiotherapy care (SC) over 12 weeks (total 45 hours direct and indirect therapy). Outcomes will be assessed at 13 weeks after commencement, and retention of effects tested at 26 weeks. The primary outcomes will be bimanual coordination and unimanual upper-limb capacity. Secondary outcomes will be participation and quality of life. Advanced brain imaging will assess neurovascular changes in response to treatment. Analysis will follow standard principles for RCTs, using two-group comparisons on all participants on an intention-to-treat basis. Comparisons will be between treatment groups using generalized linear models. Trial registration ACTRN12613000181707

  15. Some heuristic procedures for analyzing random vibration of nonlinear oscillators.

    Science.gov (United States)

    Crandall, S. H.

    1971-01-01

    The stationary response of a lightly damped nonlinear oscillator subjected to wideband random excitation can be examined as an example of thermal equilibrium. It may be assumed that the response consists of a series of free-vibration cycles with small random fluctuations in phase and amplitude. Certain statistical properties of the response can be estimated by averaging corresponding properties of the free vibration with respect to cycle amplitude distributions. Such heuristic procedures for determining the expected frequency and the autocorrelation function of the stationary response are outlined. Some additional results concerning first-passage problems for nonlinear oscillators are included.

  16. Understanding the effect of hammering process on the vibration characteristics of cymbals

    Science.gov (United States)

    Kuratani, F.; Yoshida, T.; Koide, T.; Mizuta, T.; Osamura, K.

    2016-09-01

    Cymbals are thin domed plates used as percussion instruments. When cymbals are struck, they vibrate and radiate sound. Cymbals are made through spin forming, hammering, and lathing. The spin forming creates the basic shape of the cymbal, which determines its basic vibration characteristics. The hammering and lathing produce specific sound adjustments by changing the cymbal's vibration characteristics. In this study, we study how hammering cymbals affects their vibration characteristics. The hammering produces plastic deformation (small, shallow dents) on the cymbal's surface, generating residual stresses throughout it. These residual stresses change the vibration characteristics. We perform finite element analysis of a cymbal to obtain its stress distribution and the resulting change in vibration characteristics. To reproduce the stress distribution, we use thermal stress analysis, and then with this stress distribution we perform vibration analysis. These results show that each of the cymbal's modes has a different sensitivity to the thermal load (i.e., hammering). This difference causes changes in the frequency response and the deflection shape that significantly improves the sound radiation efficiency. In addition, we explain the changes in natural frequencies by the stress and modal strain energy distributions.

  17. Vibrational Damping of Composite Materials

    OpenAIRE

    Biggerstaff, Janet M.

    2006-01-01

    The purpose of this research was to develop new methods of vibrational damping in polymeric composite materials along with expanding the knowledge of currently used vibrational damping methods. A new barrier layer technique that dramatically increased damping in viscoelastic damping materials that interacted with the composite resin was created. A method for testing the shear strength of damping materials cocured in composites was developed. Directional damping materials, where the loss facto...

  18. Vibration Theory, Vol. 1B

    DEFF Research Database (Denmark)

    Asmussen, J. C.; Nielsen, Søren R. K.

    The present collection of MATLAB exercises has been published as a supplement to the textbook, Svingningsteori, Bind 1 and the collection of exercises in Vibration theory, Vol. 1A, Solved Problems. Throughout the exercise references are made to these books. The purpose of the MATLAB exercises...... is to give a better understanding of the physical problems in linear vibration theory and to surpress the mathematical analysis used to solve the problems. For this purpose the MATLAB environment is excellent....

  19. Harmonic vibrations of multispan beams

    DEFF Research Database (Denmark)

    Dyrbye, Claes

    1996-01-01

    Free and forced harmonic vibrations of multispan beams are determined by a method which implies 1 equation regardless of the configuration. The necessary formulas are given in the paper. For beams with simple supports and the same length of all (n) spans, there is a rather big difference between...... the n´th and the (n+1)´th eigenfrequency. The reason for this phenomenon is explained.Keywords: Vibrations, Eigenfrequencies, Beams....

  20. Smart accelerometer. [vibration damage detection

    Science.gov (United States)

    Bozeman, Richard J., Jr. (Inventor)

    1994-01-01

    The invention discloses methods and apparatus for detecting vibrations from machines which indicate an impending malfunction for the purpose of preventing additional damage and allowing for an orderly shutdown or a change in mode of operation. The method and apparatus is especially suited for reliable operation in providing thruster control data concerning unstable vibration in an electrical environment which is typically noisy and in which unrecognized ground loops may exist.

  1. Improved Predictions for Geotechnical Vibrations

    OpenAIRE

    Macijauskas, Darius

    2015-01-01

    In urban areas where the infrastructure is dense and construction of new structures is near existing and sensitive buildings, frequently vibrations, caused by human activities, occur. Generated waves in the soil may adversely affect surrounding buildings. These vibrations have to be predicted a priori by using currently available knowledge of the soil dynamics. Current research, conducted by Deltares research institute, showed that the reliability of methods for prediction of m...

  2. Stress analysis of vibrating pipelines

    Science.gov (United States)

    Zachwieja, Janusz

    2017-03-01

    The pipelines are subject to various constraints variable in time. Those vibrations, if not monitored for amplitude and frequency, may result in both the fatigue damage in the pipeline profile at high stress concentration and the damage to the pipeline supports. If the constraint forces are known, the system response may be determined with high accuracy using analytical or numerical methods. In most cases, it may be difficult to determine the constraint parameters, since the industrial pipeline vibrations occur due to the dynamic effects of the medium in the pipeline. In that case, a vibration analysis is a suitable alternative method to determine the stress strain state in the pipeline profile. Monitoring the pipeline vibration levels involves a comparison between the measured vibration parameters and the permissible values as depicted in the graphs for a specific pipeline type. Unfortunately, in most cases, the studies relate to the petrochemical industry and thus large diameter, long and straight pipelines. For a pipeline section supported on both ends, the response in any profile at the entire section length can be determined by measuring the vibration parameters at two different profiles between the pipeline supports. For a straight pipeline section, the bending moments, variable in time, at the ends of the analysed section are a source of the pipe excitation. If a straight pipe section supported on both ends is excited by the bending moments in the support profile, the starting point for the stress analysis are the strains, determined from the Euler-Bernoulli equation. In practice, it is easier to determine the displacement using the experimental methods, since the factors causing vibrations are unknown. The industrial system pipelines, unlike the transfer pipelines, are straight sections at some points only, which makes it more difficult to formulate the equation of motion. In those cases, numerical methods can be used to determine stresses using the

  3. North-South divide: distribution and outcome of respiratory viral infections in paediatric intensive care units in Cape Town (South Africa) and Nottingham (United Kingdom).

    Science.gov (United States)

    Lonngren, Camilla; Morrow, Brenda M; Haynes, Sarah; Yusri, Taha; Vyas, Harish; Argent, Andrew C

    2014-03-01

    This study aims to describe and compare the spectrum, course, seasonality and outcome of children with virus-associated respiratory symptoms (VARS) admitted to two paediatric intensive care units (PICUs) in the United Kingdom (UK) and South Africa (SA). Cross-sectional study of routinely collected data on subjects admitted to PICU with respiratory symptoms and positive respiratory viral polymerase chain reaction between July 2009 and July 2011. Six hundred forty-six samples yielding 765 viral isolates (74% from SA) from 599 patients (53% male; median (interquartile range) age 6.0 (2.3-16.5) months) were included. Rhinovirus, respiratory syncytial virus and adenovirus were most commonly isolated. Adenovirus was more prevalent in SA (24.3% vs. 16.8%, P = 0.03). Possible or likely nosocomial viral acquisition occurred in 78% of isolates in SA versus 48% in the UK (P < 0.0001).Total mortality was 13.5%; 17% in SA versus 4% in the UK (P < 0.0001). Mortality for community acquired VARS was 8.4% versus 16.1% in those with possible nosocomial viral acquisition (P = 0.009). Factors independently associated with mortality were: SA study site (adjusted odds ratio (OR) 3.4, 95% confidence interval (CI) 1.4-8.5; P = 0.008); age (months) (OR 1.0, 95% CI 1.0-1.02; P = 0.001); Paediatric Index of Mortality 2 score (%) (OR 1.0, 95% CI 1.01-1.03; P = 0.0002) and isolation of adenovirus (OR 3.0, 95% CI 1.8-5.0; P < 0.0001). The outcome of children with VARS was worse in SA compared with the UK PICU. Nosocomial VARS was highlighted as an important concern and requires further investigation. © 2013 The Authors. Journal of Paediatrics and Child Health © 2013 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  4. A study of aliphatic amino acids using simulated vibrational circular dichroism and Raman optical activity spectra

    CERN Document Server

    Ganesan, Aravindhan; Wang, Feng

    2013-01-01

    Vibrational optical activity (VOA) spectra, such as vibrational circular dichroism (VCD) and Raman optical activity (ROA) spectra, of aliphatic amino acids are simulated using density functional theory (DFT) methods in both gas phase (neutral form) and solution (zwitterionic form), together with their respective infrared (IR) and Raman spectra of the amino acids. The DFT models, which are validated by excellent agreements with the available experimental Raman and ROA spectra of alanine in solution, are employed to study other aliphatic amino acids. The inferred (IR) intensive region (below 2000 cm-1) reveals the signature of alkyl side chains, whereas the Raman intensive region (above 3000 cm-1) contains the information of the functional groups in the amino acids. Furthermore, the chiral carbons of the amino acids (except for glycine) dominate the VCD and ROA spectra in the gas phase, but the methyl group vibrations produce stronger VCD and ROA signals in solution. The C-H related asymmetric vibrations domina...

  5. Vibrational modes of nanolines

    Science.gov (United States)

    Heyliger, Paul R.; Flannery, Colm M.; Johnson, Ward L.

    2008-04-01

    Brillouin-light-scattering spectra previously have been shown to provide information on acoustic modes of polymeric lines fabricated by nanoimprint lithography. Finite-element methods for modeling such modes are presented here. These methods provide a theoretical framework for determining elastic constants and dimensions of nanolines from measured spectra in the low gigahertz range. To make the calculations feasible for future incorporation in inversion algorithms, two approximations of the boundary conditions are employed in the calculations: the rigidity of the nanoline/substrate interface and sinusoidal variation of displacements along the nanoline length. The accuracy of these approximations is evaluated as a function of wavenumber and frequency. The great advantage of finite-element methods over other methods previously employed for nanolines is the ability to model any cross-sectional geometry. Dispersion curves and displacement patterns are calculated for modes of polymethyl methacrylate nanolines with cross-sectional dimensions of 65 nm × 140 nm and rectangular or semicircular tops. The vibrational displacements and dispersion curves are qualitatively similar for the two geometries and include a series of flexural, Rayleigh-like, and Sezawa-like modes. This paper is a contribution of the National Institute of Standards and Technology and is not subject to copyright in the United States.

  6. Experimental Study on Interfacial Area Transport of Two-Phase Flow under Vibration Conditions

    Directory of Open Access Journals (Sweden)

    Xiu Xiao

    2017-01-01

    Full Text Available An experimental study on air-water two-phase flow under vibration condition has been conducted using double-sensor conductivity probe. The test section is an annular geometry with hydraulic diameter of 19.1 mm. The vibration frequency ranges from 0.47 Hz to 2.47 Hz. Local measurements of void fraction, interfacial area concentration (IAC, and Sauter mean diameter have been performed along one radius in the vibration direction. The result shows that local parameters fluctuate continuously around the base values in the vibration cycle. Additional bubble force due to inertia is used to explain lateral bubble motions. The fluctuation amplitudes of local void fraction and IAC increase significantly with vibration frequency. The radial distribution of local parameters at the maximum vibration displacement is specifically analyzed. In the void fraction and IAC profiles, the peak near the inner wall is weakened or even disappearing and a strong peak skewed to outer wall is gradually observed with the increase of vibration frequency. The nondimensional peak void fraction can reach a maximum of 49% and the mean relative variation of local void fraction can increase to more than 29% as the vibration frequency increases to 2.47 Hz. But the increase of vibration frequency does not bring significant change to bubble diameter.

  7. Seismic velocity structure and spatial distribution of reflection intensity off the Boso Peninsula, Central Japan, revealed by an ocean bottom seismographic experiment

    Science.gov (United States)

    Kono, Akihiro; Sato, Toshinori; Shinohara, Masanao; Mochizuki, Kimihiro; Yamada, Tomoaki; Uehira, Kenji; Shinbo, Takashi; Machida, Yuuya; Hino, Ryota; Azuma, Ryosuke

    2016-04-01

    Off the Boso Peninsula, central Japan, where the Sagami Trough is in the south and the Japan Trench is in the east, there is a triple junction where the Pacific plate (PAC), the Philippine Sea plate (PHS) and the Honshu island arc (HIA) meet each other. In this region, the PAC subducts beneath the PHS and the HIA, and the PHS subducts beneath the HIA. Due to the subduction of 2 oceanic plates, numerous seismic events took place in the past. In order to understand these events, it is important to image structure of these plates. Hence, many researchers attempted to reveal the substructure from natural earthquakes and seismic experiments. Because most of the seismometers are placed inland area and the regular seismicity off Boso is inactive, it is difficult to reveal the precise substructure off Boso area using only natural earthquakes. Although several marine seismic experiments using active sources were conducted, vast area remains unclear off Boso Peninsula. In order to improve the situation, a marine seismic experiment, using airgun as an active source, was conducted from 30th July to 4th of August, 2009. The survey line has 216 km length and 20 Ocean Bottom Seismometers (OBSs) were placed on it. We estimated 2-D P-wave velocity structure from the airgun data using the PMDM (Progressive Model Development Method; Sato and Kenett, 2000) and the FAST (First Arrival Seismic Tomography ; Zelt and Barton, 1998). Furthermore, we identified the probable reflection phases from the data and estimated the location of reflectors using Travel time mapping method (Fujie et al. 2006). We found some reflection phases from the data, and the reflectors are located near the region where P-wave velocity is 5.0 km/s. We interpret that the reflectors indicate the plate boundary between the PHS and the HIA. The variation of the intensity of reflection along the upper surface of PHS seems to be consistent with the result from previous reflection seismic experiment conducted by Kimura et

  8. Amplifying vibrational circular dichroism by manipulation of the electronic manifold.

    Science.gov (United States)

    Domingos, Sérgio R; Panman, Matthijs R; Bakker, Bert H; Hartl, Frantisek; Buma, Wybren J; Woutersen, Sander

    2012-01-11

    Vibrational circular dichroism is a powerful technique to study the stereochemistry of chiral molecules, but often suffers from small signal intensities. Electrochemical modulation of the energies of the electronically excited state manifold is now demonstrated to lead to an order of magnitude enhancement of the differential absorption. Quantum-chemical calculations show that increased mixing between ground and excited states is at the origin of this amplification. This journal is © The Royal Society of Chemistry 2012

  9. Photochromism of Composite Organometallic Nanostructures Based on Diarylethenes. II. Vibrational Spectroscopy and Quantum Chemistry Studies

    Science.gov (United States)

    Vasilyuk, G. T.; Askirka, V. F.; Lavysh, A. V.; Kurguzenkov, S. A.; Yasinskii, V. M.; Kobeleva, O. I.; Valova, T. M.; Ayt, A. O.; Barachevsky, V. A.; Yarovenko, V. N.; Krayushkin, M. M.; Maskevich, S. A.

    2017-11-01

    The structure and photochromic transformations of nanostructured organometallic composites consisting of Ag nanoparticles with shells of photochromic diarylethenes (DAEs) deposited from various solutions onto the nanoparticles were studied using infrared absorption and surface enhanced Raman scattering (SERS) vibrational spectroscopy and quantum chemistry. The studied nanostructures exhibited photochromic properties manifested as reversible photoinduced changes of the relative intensities of SERS bands related to vibrations of bonds participating in the reversible photoisomerization. Spectral manifestations of chemical interaction between metal nanoparticles and DAE molecules were detected.

  10. Fiber-Optic Vibration Sensor Based on Multimode Fiber

    Directory of Open Access Journals (Sweden)

    I. Lujo

    2008-06-01

    Full Text Available The purpose of this paper is to present a fiberoptic vibration sensor based on the monitoring of the mode distribution in a multimode optical fiber. Detection of vibrations and their parameters is possible through observation of the output speckle pattern from the multimode optical fiber. A working experimental model has been built in which all used components are widely available and cheap: a CCD camera (a simple web-cam, a multimode laser in visible range as a light source, a length of multimode optical fiber, and a computer for signal processing. Measurements have shown good agreement with the actual frequency of vibrations, and promising results were achieved with the amplitude measurements although they require some adaptation of the experimental model. Proposed sensor is cheap and lightweight and therefore presents an interesting alternative for monitoring large smart structures.

  11. Buckling and vibration of circular cylindrical shells containing hot liquid

    Science.gov (United States)

    Ganesan, N.; Pradeep, V.

    2005-11-01

    Cylindrical shell filled with hot liquid is analyzed for buckling and vibration behavior using semi-analytical finite element method. A parametric study is conducted on a 316L stainless-steel cylinder filled with hot liquid. The temperature distribution in shell domain is obtained by using axisymmetric eight-node ring finite elements, capable of taking axial variation of temperature into account. Three-node ring elements are used for buckling and vibration analysis, formulated using semi-analytical finite element method. Thermal stress resultants and moment resultants in the shell are estimated and static buckling analysis is carried out to find the buckling temperature of the container for different levels of filling of liquid and for two different boundary conditions. Free vibration analysis carried out by considering initial stress effect and added mass effect due to hot liquid. Two different geometries are considered to study the effect of geometry on buckling temperature.

  12. Steering of hydrogen migration in hydrocarbons using intense few-cycle laser fields

    Science.gov (United States)

    Li, Hui; Kuebel, Matthias; Burger, Christian; Kling, Nora; Foerg, Benjamin; Zherebtsov, Sergey; Kling, Matthias; Kaziannis, Spyros; Siemering, Robert; de Vivie-Riedle, Regina; Stierle, Johannes; Kessel, Alexander; Betsch, Kelsie; Bergues, Boris; Trushin, Sergei; Alnaser, Ali; Azzeer, Abdallah; Ben-Itzhak, Itzik; Moshammer, Robert

    2016-05-01

    Structural rearrangements in hydrocarbons, namely acetylene, allene and toluene, are initiated by phase- and intensity-controlled few-cycle laser pulses. The momentum distributions of several ionic fragments are monitored using single-shot VMI and COLTRIMS. The results show that the hydrogen migration in these hydrocarbons can be steered by changing the CEP and the intensity of the few-cycle pulses. Quantum dynamical calculations performed on acetylene and allene show that a superposition of vibrational modes can be created by wave-form controlled few-cycle laser fields, which will result in a directionality of the hydrogen migration. This mechanism, which appears to be of general importance for such complex molecules, should also be able to explain the molecular dynamics observed in toluene.

  13. Vibrational modes of the Cu(100)-c(2x2)-Pd surface

    DEFF Research Database (Denmark)

    Stoltze, Per; Hannon, J.B.; Ibach, H.

    1996-01-01

    The vibrational modes of the surface have been measured using electron-energy loss spectroscopy. The measured mode energies are compared to dynamical models with parameters taken from effective medium theory. Strong Pd-Cu interplanar bonding gives rise to nearly degenerate Pd and Cu vibrations (95...... cm(-1)) at the (X) over bar point, despite the large mass difference of the ions. Upon low-temperature annealing of the surface, overlayer islands of pure Cu coalesce and order. These overlayer islands are characterized by a high-energy vibrational mode near 128 cm(-1) which grows in intensity upon...

  14. Off-resonant vibrational excitation: Orientational dependence and spatial control of photofragments

    DEFF Research Database (Denmark)

    Machholm, Mette; Henriksen, Niels Engholm

    2000-01-01

    -dependent response to the IR fields is due to the anharmonicity of the potential. A subsequent ultraviolet laser pulse in resonance at the outer turning point of the vibrational motion can then dissociate the oscillating molecules, all with the same orientation, leading to spatial control of the photofragment......Off-resonant and resonant vibrational excitation with short intense infrared (IR) laser pulses creates localized oscillating wave packets, but differs by the efficiency of the excitation and surprisingly by the orientational dependence. Orientational selectivity of the vibrational excitation...

  15. Translational vibrations between chains of hydrogen-bonded molecules in solid-state aspirin form I

    Science.gov (United States)

    Takahashi, Masae; Ishikawa, Yoichi

    2013-06-01

    We perform dispersion-corrected first-principles calculations, and far-infrared (terahertz) spectroscopic experiments at 4 K, to examine translational vibrations between chains of hydrogen-bonded molecules in solid-state aspirin form I. The calculated frequencies and relative intensities reproduce the observed spectrum to accuracy of 11 cm-1 or less. The stronger one of the two peaks assigned to the translational mode includes the stretching vibration of the weak hydrogen bond between the acetyl groups of a neighboring one-dimensional chain. The calculation of aspirin form II performed for comparison gives the stretching vibration of the weak hydrogen bond in one-dimensional chain.

  16. Effect of Vibration on Pain Response to Heel Lance: A Pilot Randomized Control Trial.

    Science.gov (United States)

    McGinnis, Kate; Murray, Eileen; Cherven, Brooke; McCracken, Courtney; Travers, Curtis

    2016-12-01

    Applied mechanical vibration in pediatric and adult populations has been shown to be an effective analgesic for acute and chronic pain, including needle pain. Studies among the neonatal population are lacking. According to the Gate Control Theory, it is expected that applied mechanical vibration will have a summative effect with standard nonpharmacologic pain control strategies, reducing behavioral and physiologic pain responses to heel lancing. To determine the safety and efficacy of mechanical vibration for relief of heel lance pain among neonates. In this parallel design randomized controlled trial, eligible enrolled term or term-corrected neonates (n = 56) in a level IV neonatal intensive care unit were randomized to receive either sucrose and swaddling or sucrose, swaddling, and vibration for heel lance analgesia. Vibration was applied using a handheld battery-powered vibrator (Norco MiniVibrator, Hz = 92) to the lateral aspect of the lower leg along the sural dermatome throughout the heel lance procedure. Neonatal Pain, Agitation, and Sedation Scale (N-PASS) scores, heart rate, and oxygen saturations were collected at defined intervals surrounding heel lancing. Infants in the vibration group (n = 30) had significantly lower N-PASS scores and more stable heart rates during heel stick (P = .006, P = .037) and 2 minutes after heel lance (P = .002, P = .016) than those in the nonvibration group. There were no adverse behavioral or physiologic responses to applied vibration in the sample. Applied mechanical vibration is a safe and effective method for managing heel lance pain. This pilot study suggests that mechanical vibration warrants further exploration as a nonpharmacologic pain management tool among the neonatal population.

  17. Evaluation of hand-arm vibration reducing effect of anti-vibration glove

    OpenAIRE

    樹野, 淳也; 前田, 節雄; 横田, 和樹; 平, 雄一郎

    2015-01-01

    Many kinds of the anti-vibration glove have been developed for reducing hand-arm vibration during the operation with vibration tools. International standard ISO 10819 evaluates the physical effect of gloves' vibration transmissibility but not evaluates the physiological effect of human hands. Thus, in this paper, we proposed the evaluation using the temporary threshold shift of vibrotactile perception threshold to evaluate the hand-arm vibration reducing effect of anti-vibration glove. We per...

  18. Vibrational Probes: From Small Molecule Solvatochromism Theory and Experiments to Applications in Complex Systems.

    Science.gov (United States)

    Błasiak, Bartosz; Londergan, Casey H; Webb, Lauren J; Cho, Minhaeng

    2017-04-18

    The vibrational frequency of a chosen normal mode is one of the most accurately measurable spectroscopic properties of molecules in condensed phases. Accordingly, infrared absorption and Raman scattering spectroscopy have provided valuable information on both distributions and ensemble-average values of molecular vibrational frequencies, and these frequencies are now routinely used to investigate structure, conformation, and even absolute configuration of chemical and biological molecules of interest. Recent advancements in coherent time-domain nonlinear vibrational spectroscopy have allowed the study of heterogeneous distributions of local structures and thermally driven ultrafast fluctuations of vibrational frequencies. To fully utilize IR probe functional groups for quantitative bioassays, a variety of biological and chemical techniques have been developed to site-specifically introduce vibrational probe groups into proteins and nucleic acids. These IR-probe-labeled biomolecules and chemically reactive systems are subject to linear and nonlinear vibrational spectroscopic investigations and provide information on the local electric field, conformational changes, site-site protein contacts, and/or function-defining features of biomolecules. A rapidly expanding library of data from such experiments requires an interpretive method with atom-level chemical accuracy. However, despite prolonged efforts to develop an all-encompassing theory for describing vibrational solvatochromism and electrochromism as well as dynamic fluctuations of instantaneous vibrational frequencies, purely empirical and highly approximate theoretical models have often been used to interpret experimental results. They are, in many cases, based on the simple assumption that the vibrational frequency of an IR reporter is solely dictated by electric potential or field distribution around the vibrational chromophore. Such simplified description of vibrational solvatochromism generally referred to as

  19. The rate parameters for coupled vibration-dissociation in a generalized SSH approximation. [Schwarz, Slawsky, and Herzfeld

    Science.gov (United States)

    Sharma, Surendra P.; Huo, Winifred M.; Park, Chul

    1988-01-01

    A theoretical study of vibrational excitations and dissociations of nitrogen undergoing a nonequilibrium relaxation process upon heating and cooling is reported. The rate coefficients for collisional induced vibrational transitions and transitions from a bound vibrational state into a dissociative state have been calculated using an extension of the theory originally proposed by Schwarz (SSH) et al. (1952). High-lying vibrational states and dissociative states were explicitly included but rotational energy transfer was neglected. The transition probabilities calculated from the SSH theory were fed into the master equation, which was integrated numerically to determine the population distribution of the vibrational states as well as bulk thermodynamic properties. The results show that: (1) the transition rates have a minimum near the middle of the bound vibrational levels, causing a bottleneck in the vibrational relaxation and dissociation rates; (2) high vibrational states are always in equilibrium with the dissociative state; (3) for the heating case, only the low vibrational states relax according to the Landau-Teller theory; (4) for the cooling case, vibrational relaxation cannot be described by a rate equation; (5) Park's (1985, 1988) two-temperature model is approximately valid; and (6) the average vibrational energy removed in dissociation is about 30 percent of the dissociation energy.

  20. Intensive mobilities

    DEFF Research Database (Denmark)

    Vannini, Phillip; Bissell, David; Jensen, Ole B.

    which relate to transport, housing and employment. Yet we argue that the experiential dimensions of long distance mobilities have not received the attention that they deserve within geographical research on mobilities. This paper combines ideas from mobilities research and contemporary social theory......This paper explores the intensities of long distance commuting journeys as a way of exploring how bodily sensibilities are being changed by the mobilities that they undertake. The context of this paper is that many people are travelling further to work than ever before owing to a variety of factors...... with fieldwork conducted in Canada, Denmark and Australia to develop our understanding of the experiential politics of long distance workers. Rather than focusing on the extensive dimensions of mobilities that are implicated in patterns and trends, our paper turns to the intensive dimensions of this experience...

  1. Rotor position and vibration control for aerospace flywheel energy storage devices and other vibration based devices

    Science.gov (United States)

    Alexander, B. X. S.

    Flywheel energy storage has distinct advantages over conventional energy storage methods such as electrochemical batteries. Because the energy density of a flywheel rotor increases quadratically with its speed, the foremost goal in flywheel design is to achieve sustainable high speeds of the rotor. Many issues exist with the flywheel rotor operation at high and varying speeds. A prominent problem is synchronous rotor vibration, which can drastically limit the sustainable rotor speed. In a set of projects, the novel Active Disturbance Rejection Control (ADRC) is applied to various problems of flywheel rotor operation. These applications include rotor levitation, steady state rotation at high speeds and accelerating operation. Several models such as the lumped mass model and distributed three-mass models have been analyzed. In each of these applications, the ADRC has been extended to cope with disturbance, noise, and control effort optimization; it also has been compared to various industry-standard controllers such as PID and PD/observer, and is proven to be superior. The control performance of the PID controller and the PD/observer currently used at NASA Glenn has been improved by as much as an order of magnitude. Due to the universality of the second order system, the results obtained in the rotor vibration problem can be straightforwardly extended to other vibrational systems, particularly, the MEMS gyroscope. Potential uses of a new nonlinear controller, which inherits the ease of use of the traditional PID, are also discussed.

  2. Rotational spectra of vibrationally excited CCH and CCD.

    Science.gov (United States)

    Killian, T C; Gottlieb, C A; Thaddeus, P

    2007-09-21

    The millimeter-wave rotational spectra of the lowest bending and stretching vibrational levels of CCH and CCD were observed in a low pressure discharge through acetylene and helium. The rotational, centrifugal distortion, and fine structure constants were determined for the (02(0)0) and (02(2)0) bending states, the (100) and (001) stretching levels, and the (011) combination level of CCH. The same pure bending and stretching levels, and the (110) combination level were observed in CCD. Apparent anomalies in the spectroscopic constants in the bending states were shown to be due to l-type resonances. Hyperfine constants, which in CCH are sensitive to the degree of admixture of the A 2Pi excited electronic state, were determined in the excited vibrational levels of both isotopic species. Theoretical Fermi contact and dipole-dipole hyperfine constants calculated by Peric et al. [J. Mol. Spectrosc. 150, 70 (1991)] were found to be in excellent agreement with the measured constants. In CCD, new rotational lines tentatively assigned to the (100) level largely on the basis of the observed hyperfine structure support the assignment of the C-H stretching fundamental (nu1) by Stephens et al. [J. Mol. Struct. 190, 41 (1988)]. Rotational lines in the excited vibrational levels of CCH are fairly intense in our discharge source because the vibrational excitation temperatures of the bending vibrational levels and the (110) and (011) combination levels are only about 100 K higher than the gas kinetic temperature, unlike the higher frequency stretching vibrations, where the excitation temperatures are five to ten times higher.

  3. Noise and vibration analysis for automotive radiator cooling fan

    Science.gov (United States)

    Razak, N. F. D.; Sani, M. S. M.; Azmi, W. H.; Zhang, B.

    2017-10-01

    This paper aims to analyse the noise and vibration of the automotive radiator specifically focused on its cooling fan for different fan conditions and different coolants used namely Ethylene Glycol (EG) water-based and Titanium Oxide (TiO2) nanofluid. Noise source identification is carried out by utilizing the sound intensity mapping method while an accelerometer is used to measure the vibration results. Both of these experiments are conducted when the fan was both in static and working conditions. The maximum cooling fan speed for the working fan detected by a tachometer for EG water-based is 1990 rpm while TiO2 nanofluid is 2030 rpm. The difference in speed is due to the different physical properties such viscosity of each coolant has where TiO2 nanofluid has lower viscosity than EG water-based. The maximum sound power level produced by EG water-based is 53.73 dB while TiO2 nanofluid is 101.94 dB. Meanwhile, the vibration frequencies of EG water-based are higher than TiO2 nanofluid. The noise level increases with the cooling fan speed but decreases with the vibration frequency. Apart from studying the noise and vibration of the automotive radiator, this research also analysed the potential application using nanofluid due to its great properties according to its major use in the heat transfer enhancement. As a conclusion, nanofluid as a radiator coolant could improve heat transfer rate, and could also reduce the presence of vibration in the automotive cooling system.

  4. Displacement of polarons by vibrational modes in doped conjugated polymers

    Science.gov (United States)

    Anderson, M.; Ramanan, C.; Fontanesi, C.; Frick, A.; Surana, S.; Cheyns, D.; Furno, M.; Keller, T.; Allard, S.; Scherf, U.; Beljonne, D.; D'Avino, G.; von Hauff, E.; Da Como, E.

    2017-10-01

    Organic pi-conjugated polymers are deemed to be soft materials with strong electron-phonon coupling, which results in the formation of polarons, i.e., charge carriers dressed by self-localized distortion of the nuclei. Universal signatures for polarons are optical resonances below the band gap and intense vibrational modes (IVMs), both found in the infrared (IR) spectral region. Here, we study p -doped conjugated homo- and copolymers by combining first-principles modelling and optical spectroscopy from the far-IR to the visible. Polaronic IVMs are found to feature absorption intensities comparable to purely electronic transitions and, most remarkably, show only loose resemblance to the Raman or IR-active modes of the neutral polymer. The IVM frequency is dramatically scaled down (up to 50%) compared to the backbone carbon-stretching modes in the pristine polymers. The very large intensity of IVMs is associated with displacement of the excess positive charge along the backbone driven by specific vibrational modes. We propose a quantitative picture for the identification of these polaron shifting modes that solely based on structural information, directly correlates with their IR intensity. This finding finally discloses the elusive microscopic mechanism behind the huge IR intensity of IVMs in doped polymeric semiconductors.

  5. Imaging of spatial distributions of the millimeter wave intensity by using visible continuum radiation from a discharge in a Cs-Xe mixture. Part I: Review of the method and its fundamentals

    Science.gov (United States)

    Gitlin, M. S.

    2017-02-01

    The first part of the review is presented which is dedicated to the time-resolved method of imaging and measuring the spatial distribution of the intensity of millimeter waves by using visible continuum (VC) emitted by the positive column (PC) of a dc discharge in a mixture of cesium vapor with xenon. The review focuses on the operating principles, fundamentals, and applications of this new technique. The design of the discharge tube and experimental setup used to create a wide homogeneous plasma slab with the help of the Cs-Xe discharge at a gas pressure of 45 Torr are described. The millimeter-wave effects on the plasma slab are studied experimentally. The mechanism of microwave-induced variations in the VC brightness and the causes of violation of the local relation between the VC brightness and the intensity of millimeter waves are discussed. Experiments on the imaging of the field patterns of horn antennas and quasi-optical beams demonstrate that this technique can be used for good-quality imaging of millimeter-wave beams in the entire millimeter-wavelength band. The method has a microsecond temporal resolution and a spatial resolution of about 2 mm. Energy sensitivities of about 10 μJ/cm2 in the Ka-band and about 200 μJ/cm2 in the D-band have been demonstrated.

  6. Imaging of spatial distributions of the millimeter wave intensity by using visible continuum radiation from a discharge in a Cs–Xe mixture. Part I: Review of the method and its fundamentals

    Energy Technology Data Exchange (ETDEWEB)

    Gitlin, M. S., E-mail: gitlin@appl.sci-nnov.ru [Russian Academy of Sciences, Institute of Applied Physics (Russian Federation)

    2017-02-15

    The first part of the review is presented which is dedicated to the time-resolved method of imaging and measuring the spatial distribution of the intensity of millimeter waves by using visible continuum (VC) emitted by the positive column (PC) of a dc discharge in a mixture of cesium vapor with xenon. The review focuses on the operating principles, fundamentals, and applications of this new technique. The design of the discharge tube and experimental setup used to create a wide homogeneous plasma slab with the help of the Cs–Xe discharge at a gas pressure of 45 Torr are described. The millimeter-wave effects on the plasma slab are studied experimentally. The mechanism of microwave-induced variations in the VC brightness and the causes of violation of the local relation between the VC brightness and the intensity of millimeter waves are discussed. Experiments on the imaging of the field patterns of horn antennas and quasi-optical beams demonstrate that this technique can be used for good-quality imaging of millimeter-wave beams in the entire millimeter-wavelength band. The method has a microsecond temporal resolution and a spatial resolution of about 2 mm. Energy sensitivities of about 10 μJ/cm{sup 2} in the Ka-band and about 200 μJ/cm{sup 2} in the D-band have been demonstrated.

  7. The influence of vibrational state-resolved transport coefficients on the wave propagation in diatomic gases

    Science.gov (United States)

    Kremer, Gilberto M.; Kunova, Olga V.; Kustova, Elena V.; Oblapenko, George P.

    2018-01-01

    A detailed kinetic-theory model for the vibrationally state-resolved transport coefficients is developed taking into account the dependence of the collision cross section on the size of vibrationally excited molecule. Algorithms for the calculation of shear and bulk viscosity, thermal conductivity, thermal diffusion and diffusion coefficients for vibrational states are proposed. The transport coefficients are evaluated for single-component diatomic gases N2, O2, NO, H2, Cl2 in the wide range of temperature, and the effects of molecular diameters and the number of accounted states are discussed. The developed model is applied to study wave propagation in diatomic gases. For the case of initial Boltzmann distribution, the influence of vibrational excitation on the phase velocity and attenuation coefficient is found to be weak. We expect more significant effect in the case of initial thermal non-equilibrium, for instance in gases with optically pumped selected vibrational states.

  8. Plate-shaped non-contact ultrasonic transporter using flexural vibration.

    Science.gov (United States)

    Ishii, Takahiko; Mizuno, Yosuke; Koyama, Daisuke; Nakamura, Kentaro; Harada, Kana; Uchida, Yukiyoshi

    2014-02-01

    We developed a plate-shaped non-contact transporter based on ultrasonic vibration, exploiting a phenomenon that a plate can be statically levitated at the place where its gravity and the acoustic radiation force are balanced. In the experiment, four piezoelectric zirconate titanate elements were attached to aluminum plates, on which lattice flexural vibration was excited at 22.3 kHz. The vibrating plates were connected to a loading plate via flexible posts that can minimize the influence of the flexure induced by heavy loads. The distribution of the vibration displacement on the plate was predicted through finite-element analysis to find the appropriate positions of the posts. The maximum levitation height of this transporter was 256 μm with no load. When two vibrating plates were connected to a loading plate, the maximum transportable load was 4.0 kgf. Copyright © 2013. Published by Elsevier B.V.

  9. Advances in structural vibration control application of magneto-rheological visco-elastomer

    Directory of Open Access Journals (Sweden)

    Zuguang Ying

    2017-03-01

    Full Text Available Magneto-rheological visco-elastomer (MRVE as a new smart material developed in recent years has several significant advantages over magneto-rheological liquid. The adjustability of structural dynamics to random environmental excitations is required in vibration control. MRVE can supply considerably adjustable damping and stiffness for structures, and the adjustment of dynamic properties is achieved only by applied magnetic fields with changeless structure design. Increasing researches on MRVE dynamic properties, modeling, and vibration control application are presented. Recent advances in MRVE dynamic properties and structural vibration control application including composite structural vibration mitigation under uniform magnetic fields, vibration response characteristics improvement through harmonic parameter distribution, and optimal bounded parametric control design based on the dynamical programming principle are reviewed. Relevant main methods and results introduced are beneficial to understanding and researches on MRVE application and development.

  10. Ultrasonic metal welding with a vibration source using longitudinal and torsional vibration transducers

    Science.gov (United States)

    Asami, Takuya; Tamada, Yosuke; Higuchi, Yusuke; Miura, Hikaru

    2017-07-01

    Conventional ultrasonic metal welding for joining dissimilar metals uses a linear vibration locus, although this method suffers from problems such as low overall weld strength. Our previous studies have shown that ultrasonic welding with a planar vibration locus improves the weld strength. However, the vibration source in our previous studies had problems in longitudinal-torsional vibration controllability and small welding tip. Therefore, the study of the optimal shape of the vibration locus was difficult. Furthermore, improvement of weld strength cannot be expected. We have developed a new ultrasonic vibration source that can control the longitudinal-torsional vibration and can connect to a large welding tip. In this study, we clarified the longitudinal-torsional vibration controllability of the developed ultrasonic vibration source. Moreover, we clarified that using the planar locus of the developed vibration source produced a higher weld strength than our previous studies, and clarified the optimal shape of the vibration locus.

  11. Mechanical Vibrations Modeling and Measurement

    CERN Document Server

    Schmitz, Tony L

    2012-01-01

    Mechanical Vibrations:Modeling and Measurement describes essential concepts in vibration analysis of mechanical systems. It incorporates the required mathematics, experimental techniques, fundamentals of modal analysis, and beam theory into a unified framework that is written to be accessible to undergraduate students,researchers, and practicing engineers. To unify the various concepts, a single experimental platform is used throughout the text to provide experimental data and evaluation. Engineering drawings for the platform are included in an appendix. Additionally, MATLAB programming solutions are integrated into the content throughout the text. This book also: Discusses model development using frequency response function measurements Presents a clear connection between continuous beam models and finite degree of freedom models Includes MATLAB code to support numerical examples that are integrated into the text narrative Uses mathematics to support vibrations theory and emphasizes the practical significanc...

  12. Vibrational and theoretical study of selected diacetylenes.

    Science.gov (United States)

    Roman, Maciej; Baranska, Malgorzata

    2013-11-01

    Six commonly used disubstituted diacetylenes with short side-chains (RCCCCR, where R=CH2OH, CH2OPh, C(CH3)2OH, C(CH3)3, Si(CH3)3, and Ph) were analyzed using vibrational spectroscopy and quantum-chemical calculations to shed new light on structural and spectroscopic properties of these compounds. Prior to that the conformational analysis of diacetylenes was performed to search the Potential Energy Surface for low-energy minima. Theoretical investigations were followed by the potential energy distribution (PED) analysis to gain deeper insight into FT-Raman and FT-IR spectra that, in some cases, were recorded for the first time for the studied compounds. The analysis was focused mainly on spectral features of the diacetylene system sensitive to the substitution. Shifts of the characteristic bands and changes in bond lengths were observed when changing the substituent. Furthermore, Fermi resonance was observed in the vibrational spectra of some diacetylenes. FT-IR spectra were measured by using two methods, i.e. transmission (with KBr substrate) and Attenuated Total Reflection (ATR), showing the latter adequate and fast tool for IR measurements of diacetylenes. Additionally, Surface Enhanced Raman Spectroscopy (SERS) was applied for phenyl derivative for the first time to study its interaction with metallic nanoparticles that seems to be perpendicular. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Gas Bubble Dynamics under Mechanical Vibrations

    Science.gov (United States)

    Mohagheghian, Shahrouz; Elbing, Brian

    2017-11-01

    The scientific community has a limited understanding of the bubble dynamics under mechanical oscillations due to over simplification of Navier-Stockes equation by neglecting the shear stress tensor and not accounting for body forces when calculating the acoustic radiation force. The current work experimental investigates bubble dynamics under mechanical vibration and resulting acoustic field by measuring the bubble size and velocity using high-speed imaging. The experimental setup consists of a custom-designed shaker table, cast acrylic bubble column, compressed air injection manifold and an optical imaging system. The mechanical vibrations resulted in accelerations between 0.25 to 10 times gravitational acceleration corresponding to frequency and amplitude range of 8 - 22Hz and 1 - 10mm respectively. Throughout testing the void fraction was limited to bubble size is larger than resonance size and smaller than acoustic wavelength. The amplitude of acoustic pressure wave was estimated using the definition of Bjerknes force in combination with Rayleigh-Plesset equation. Physical behavior of the system was capture and classified. Bubble size, velocity as well as size and spatial distribution will be presented.

  14. DOWNHOLE VIBRATION MONITORING & CONTROL SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Martin E. Cobern

    2004-08-31

    The deep hard rock drilling environment induces severe vibrations into the drillstring, which can cause reduced rates of penetration (ROP) and premature failure of the equipment. The only current means of controlling vibration under varying conditions is to change either the rotary speed or the weight-on-bit (WOB). These changes often reduce drilling efficiency. Conventional shock subs are useful in some situations, but often exacerbate the problems. The objective of this project is development of a unique system to monitor and control drilling vibrations in a ''smart'' drilling system. This system has two primary elements: (1) The first is an active vibration damper (AVD) to minimize harmful axial, lateral and torsional vibrations. The hardness of this damper will be continuously adjusted using a robust, fast-acting and reliable unique technology. (2) The second is a real-time system to monitor drillstring vibration, and related parameters. This monitor adjusts the damper according to local conditions. In some configurations, it may also send diagnostic information to the surface via real-time telemetry. The AVD is implemented in a configuration using magnetorheological (MR) fluid. By applying a current to the magnetic coils in the damper, the viscosity of the fluid can be changed rapidly, thereby altering the damping coefficient in response to the measured motion of the tool. Phase I of this program entailed modeling and design of the necessary subsystems and design, manufacture and test of a full laboratory prototype. Phase I of the project was completed by the revised end date of May 31, 2004. The objectives of this phase were met, and all prerequisites for Phase II have been completed.

  15. DOWNHOLE VIBRATION MONITORING & CONTROL SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Martin E. Cobern

    2004-10-13

    The deep hard rock drilling environment induces severe vibrations into the drillstring, which can cause reduced rates of penetration (ROP) and premature failure of the equipment. The only current means of controlling vibration under varying conditions is to change either the rotary speed or the weight-on-bit (WOB). These changes often reduce drilling efficiency. Conventional shock subs are useful in some situations, but often exacerbate the problems. The objective of this project is development of a unique system to monitor and control drilling vibrations in a ''smart'' drilling system. This system has two primary elements: (1) The first is an active vibration damper (AVD) to minimize harmful axial, lateral and torsional vibrations. The hardness of this damper will be continuously adjusted using a robust, fast-acting and reliable unique technology. (2) The second is a real-time system to monitor drillstring vibration, and related parameters. This monitor adjusts the damper according to local conditions. In some configurations, it may also send diagnostic information to the surface via real-time telemetry. The AVD is implemented in a configuration using magnetorheological (MR) fluid. By applying a current to the magnetic coils in the damper, the viscosity of the fluid can be changed rapidly, thereby altering the damping coefficient in response to the measured motion of the tool. Phase I of this program entailed modeling and design of the necessary subsystems and design, manufacture and test of a full laboratory prototype. Phase I of the project was completed by the revised end date of May 31, 2004. The objectives of this phase were met, and all prerequisites for Phase II have been completed. The month of June, 2004 was primarily occupied with the writing of the Phase I Final Report, the sole deliverable of Phase I, which will be submitted in the next quarter. Redesign of the laboratory prototype and design of the downhole (Phase II) prototype was

  16. Sound Power Estimation by Laser Doppler Vibration Measurement Techniques

    Directory of Open Access Journals (Sweden)

    G.M. Revel

    1998-01-01

    Full Text Available The aim of this paper is to propose simple and quick methods for the determination of the sound power emitted by a vibrating surface, by using non-contact vibration measurement techniques. In order to calculate the acoustic power by vibration data processing, two different approaches are presented. The first is based on the method proposed in the Standard ISO/TR 7849, while the second is based on the superposition theorem. A laser-Doppler scanning vibrometer has been employed for vibration measurements. Laser techniques open up new possibilities in this field because of their high spatial resolution and their non-intrusivity. The technique has been applied here to estimate the acoustic power emitted by a loudspeaker diaphragm. Results have been compared with those from a commercial Boundary Element Method (BEM software and experimentally validated by acoustic intensity measurements. Predicted and experimental results seem to be in agreement (differences lower than 1 dB thus showing that the proposed techniques can be employed as rapid solutions for many practical and industrial applications. Uncertainty sources are addressed and their effect is discussed.

  17. Vibration Analysis for Steam Dryer of APR1400 Steam Generator

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sung-heum; Ko, Doyoung [KHNP CRI, Daejeon (Korea, Republic of); Cho, Minki [Doosan Heavy Industry, Changwon (Korea, Republic of)

    2016-10-15

    This paper is related to comprehensive vibration assessment program for APR1400 steam generator internals. According to U.S. Nuclear Regulatory Commission, Regulatory Guide 1.20 (Rev.3, March 2007), we conducted vibration analysis for a steam dryer as the second steam separator of steam generator internals. The vibration analysis was performed at the 100 % power operating condition as the normal operation condition. The random hydraulic loads were calculated by the computational fluid dynamics and the structural responses were predicted by power spectral density analysis for the probabilistic method. In order to meet the recently revised U.S. NRC RG 1.20 Rev.3, the CVAP against the potential adverse flow effects in APR1400 SG internals should be performed. This study conducted the vibration response analysis for the SG steam dryer as the second moisture separator at the 100% power condition, and evaluated the structural integrity. The predicted alternating stress intensities were evaluated to have more than 17.78 times fatigue margin compared to the endurance limit.

  18. Stroboscopic shearography for vibration analysis

    Science.gov (United States)

    Steinchen, Wolfgang; Kupfer, Gerhard; Maeckel, Peter; Voessing, Frank

    1999-09-01

    Digital Shearography, a laser interferometric technique in conjunction with the digital image processing, has the potential for vibration analysis due to its simple optical system and insensitivity against small rigid body motions. This paper will focus on its recent developments for vibration analysis and for nondestructive testing (NDT) by dynamic (harmonical) excitation. With the introduction of real time observation using automatically refreshing reference frame, both small and large rigid body motions are greatly suppressed. The development of a smaller and more mobile measuring device in conjunction with a user guided comfortable program Shearwin enables the digital shearography to be applied easily as an industrial online testing tool.

  19. Vibrational Collapse of Hexapod Packings

    Science.gov (United States)

    Zhao, Yuchen; Ding, Jingqiu; Barés, Jonathan; Zheng, Hu; Dierichs, Karola; Menges, Achim; Behringer, Robert

    2017-06-01

    Columns made of convex noncohesive grains like sand collapse after being released from a confining container. However, structures built from non-convex grains can be stable without external support. In the current experiments, we investigate the effect of vibration on destroying such columns. The change of column height during vertical vibration, can be well characterized by stretched exponential relaxation when the column is short, which is in agreement with previous work, while a faster collapse happens when the column is tall. We investigate the collapse after the fast process including its dependence on column geometry, and on interparticle and basal friction.

  20. Innovative Techniques Simplify Vibration Analysis

    Science.gov (United States)

    2010-01-01

    In the early years of development, Marshall Space Flight Center engineers encountered challenges related to components in the space shuttle main engine. To assess the problems, they evaluated the effects of vibration and oscillation. To enhance the method of vibration signal analysis, Marshall awarded Small Business Innovation Research (SBIR) contracts to AI Signal Research, Inc. (ASRI), in Huntsville, Alabama. ASRI developed a software package called PC-SIGNAL that NASA now employs on a daily basis, and in 2009, the PKP-Module won Marshall s Software of the Year award. The technology is also used in many industries: aircraft and helicopter, rocket engine manufacturing, transportation, and nuclear power."

  1. Active Control of Panel Vibrations Induced by a Boundary Layer Flow

    Science.gov (United States)

    Chow, Pao-Liu

    1998-01-01

    In recent years, active and passive control of sound and vibration in aeroelastic structures have received a great deal of attention due to many potential applications to aerospace and other industries. There exists a great deal of research work done in this area. Recent advances in the control of sound and vibration can be found in the several conference proceedings. In this report we will summarize our research findings supported by the NASA grant NAG-1-1175. The problems of active and passive control of sound and vibration has been investigated by many researchers for a number of years. However, few of the articles are concerned with the sound and vibration with flow-structure interaction. Experimental and numerical studies on the coupling between panel vibration and acoustic radiation due to flow excitation have been done by Maestrello and his associates at NASA/Langley Research Center. Since the coupled system of nonlinear partial differential equations is formidable, an analytical solution to the full problem seems impossible. For this reason, we have to simplify the problem to that of the nonlinear panel vibration induced by a uniform flow or a boundary-layer flow with a given wall pressure distribution. Based on this simplified model, we have been able to study the control and stabilization of the nonlinear panel vibration, which have not been treated satisfactorily by other authors. The vibration suppression will clearly reduce the sound radiation power from the panel. The major research findings will be presented in the next three sections. In Section II we shall describe our results on the boundary control of nonlinear panel vibration, with or without flow excitation. Section III is concerned with active control of the vibration and sound radiation from a nonlinear elastic panel. A detailed description of our work on the parametric vibrational control of nonlinear elastic panel will be presented in Section IV. This paper will be submitted to the Journal

  2. Strong impact of lattice vibrations on electronic and magnetic properties of paramagnetic Fe revealed by disordered local moments molecular dynamics

    NARCIS (Netherlands)

    Alling, B.; Kormann, F.H.W.; Grabowski, B; Glensk, A; Abrikosov, I.A.

    2016-01-01

    We study the impact of lattice vibrations on magnetic and electronic properties of paramagnetic bcc and fcc iron at finite temperature, employing the disordered local moments molecular dynamics (DLM-MD) method. Vibrations strongly affect the distribution of local magnetic moments at finite

  3. Wavelets, vibrations and scalings

    CERN Document Server

    Meyer, Yves

    1997-01-01

    Physicists and mathematicians are intensely studying fractal sets of fractal curves. Mandelbrot advocated modeling of real-life signals by fractal or multifractal functions. One example is fractional Brownian motion, where large-scale behavior is related to a corresponding infrared divergence. Self-similarities and scaling laws play a key role in this new area. There is a widely accepted belief that wavelet analysis should provide the best available tool to unveil such scaling laws. And orthonormal wavelet bases are the only existing bases which are structurally invariant through dyadic dilations. This book discusses the relevance of wavelet analysis to problems in which self-similarities are important. Among the conclusions drawn are the following: 1) A weak form of self-similarity can be given a simple characterization through size estimates on wavelet coefficients, and 2) Wavelet bases can be tuned in order to provide a sharper characterization of this self-similarity. A pioneer of the wavelet "saga", Meye...

  4. Vibrational normal modes calculation in the crystalline state of methylated monosaccharides: Anomers of the methyl-D-glucopyranoside and methyl-D-xylopyranoside molecules.

    Science.gov (United States)

    Taleb-Mokhtari, Ilham Naoual; Lazreg, Abbassia; Sekkal-Rahal, Majda; Bestaoui, Noreya

    2016-01-15

    A structural investigation of the organic molecules is being carried out using vibrational spectroscopy. In this study, normal co-ordinate calculations of anomers of the methyl-D-glucopyranoside and methyl-β-D-xylopyranoside in the crystalline state have been performed using the modified Urey-Bradley-Shimanouchi force field (mUBSFF) combined with an intermolecular potential energy function. The latter includes Van der Waals interactions, electrostatic terms, and explicit hydrogen bond functions. The vibrational spectra of the compounds recorded in the crystalline state, in the 4000-500 cm(-1) spectral region for the IR spectra, and in the 4000-20 cm(-1) spectral range for the Raman spectra are presented. After their careful examination, several differences in the intensities and frequency shifts have been observed. The theoretical spectra have been obtained after a tedious refinement of the force constants. Thus, on the basis of the obtained potential distribution, each observed band in IR and in Raman has been assigned to a vibrational mode. The obtained results are indeed in agreement with those observed experimentally and thus confirm the previous assignments made for the methyl-α and β-D-glucopyranoside, as well as for the methyl-β-D-xylopyranoside. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. A Vibrational Circular Dichroism Microsampling Accessory: Mapping Enhanced Vibrational Circular Dichroism in Amyloid Fibril Films.

    Science.gov (United States)

    Lu, Xuefang; Li, Honggang; Nafie, Jordan W; Pazderka, Tomáš; Pazderková, Markéta; Dukor, Rina K; Nafie, Laurence A

    2017-06-01

    We report the first vibrational circular dichroism (VCD) measurement of spatial heterogeneity in a sample using infrared (IR) microsampling. Vibrational circular dichroism spectra are typically measured using a standard IR cell with an IR beam diameter of 10 mm or greater making it impossible to investigate the spatial heterogeneity of a solid film sample. We have constructed a VCD sampling assembly with either 3 mm or 1 mm spatial resolution. An XY-translation stage was used to measure spectra at different spatial locations producing IR and VCD maps of the sample. In addition, a rotating sample stage was employed using a dual photoelastic modulator (PEM) setup to suppress artifacts due to linear birefringence in solid-phase or film samples. Infrared and VCD mapping of an insulin fibril film has been carried out at both 3 and 1 mm spatial resolution, and lysozyme films were mapped at 1 mm resolution. The IR spectra of different spots vary in intensity due primarily to sample thickness. The changes in the VCD intensity across the map largely correlate to corresponding changes in the IR map. Closer inspection of the insulin map revealed changes in the relative intensities of the VCD spectra not present in the parent IR spectra, which indicated differences in the degree of supramolecular chirality of the fibrils in the various spatial regions. For lysozyme films, in addition to different degrees of supramolecular chirality, reversal of the net fibril chirality was observed. The large signal-to-noise ratio observed at 1 mm resolution implies the feasibility of further increasing the spatial resolution by one or two orders of magnitude for protein fibril film samples.

  6. A computational investigation of vibration attenuation of a rigid rotor turning at a variable speed by means of short magnetorheological dampers

    Directory of Open Access Journals (Sweden)

    Zapoměl J.

    2009-12-01

    Full Text Available Rotors of all rotating machines are always slightly imbalanced. When they rotate, the imbalance induces their lateral vibration and forces that are transmitted via the bearings into the foundations. These phenomena are significant if the rotor accelerates or decelerates and especially if it passes over the critical speeds. The vibration can be reduced if the rotor supports are equipped with damping elements. To achieve optimum performance of the damper, the damping effect must be controllable. At present time, semiactive magnetorheological squeeze film dampers are a subject of intensive research. They work on a principle of squeezing a thin film of magnetorheological liquid. If magnetic field is applied, the magnetorheological liquid starts to flow only if the shear stress between two neighbourhood layers exceeds a limit value which depends on intensity of the magnetic field. Its change enables to control the damping force. In the mathematical models, the magnetorheological liquid is usually considered as Bingham one. Application of the computer modelling method for analysis of rotors supported by rolling element bearings and magnetorheological squeeze film dampers and turning at variable angular speed requires to set up the equations of motion of the rotor and to develop a procedure for calculation of the damping force. Derivation of the equations of motion starts from the first and second impulse theorems. The pressure distribution in the thin lubricating film can be described by a Reynolds equation modified for the case of Bingham liquid. In cavitated areas, it is assumed that pressure of the medium remains constant. The hydraulic force acting on the rotor journal is then obtained by integration of the pressure distribution around the circumference and along the length of the damper. Applicability of the developed procedures was tested by means of computer simulations and influence of the control of the damping force on vibration of the rotor

  7. Vibrationally Driven Hydrogen Abstraction Reaction by Bromine Radical in Solution

    Science.gov (United States)

    Shin, Jae Yoon; Shalowski, Michael A.; Crim, F. Fleming

    2013-06-01

    Previously, we have shown that preparing reactants in specific vibrational states can affect the product state distribution and branching ratios in gas phase reactions. In the solution phase, however, no vibrational mediation study has been reported to date. In this work, we present our first attempt of vibrationally mediated bimolecular reaction in solution. Hydrogen abstraction from a solvent by a bromine radical can be a good candidate to test the effect of vibrational excitation on reaction dynamics because this reaction is highly endothermic and thus we can suppress any thermally initiated reaction in our experiment. Br radical quickly forms CT (charge transfer) complex with solvent molecule once it is generated from photolysis of a bromine source. The CT complex strongly absorbs visible light, which allows us to use electronic transient absorption for tracking Br radical population. For this experiment, we photolyze bromoform solution in dimethyl sulfoxide (DMSO) solvent with 267 nm to generate Br radical and excite the C-H stretch overtone of DMSO with 1700 nm a few hundred femtoseconds after the photolysis. Then, we monitor the population of Br-DMSO complex with 400 nm as a function of delay time between two pump beams and probe beam. As a preliminary result, we observed the enhancement of loss of Br-DMSO complex population due to the vibrational excitation. We think that increased loss of Br-DMSO complex is attributed to more loss of Br radical that abstracts hydrogen from DMSO and it is the vibrational excitation that promotes the reaction. To make a clear conclusion, we will next utilize infrared probing to directly detect HBr product formation.

  8. Resonant vibration control of rotating beams

    DEFF Research Database (Denmark)

    Svendsen, Martin Nymann; Krenk, Steen; Høgsberg, Jan Becker

    2011-01-01

    Rotatingstructures,like e.g.wind turbine blades, may be prone to vibrations associated with particular modes of vibration. It is demonstrated, how this type of vibrations can be reduced by using a collocated sensor–actuator system, governed by a resonant controller. The theory is here demonstrated...... modal connectivity, only very limited modal spill-over is generated. The controller acts by resonance and therefore has only a moderate energy consumption, and successfully reduces modal vibrations at the resonance frequency....

  9. Study of neutron migration ion a multiplying medium according to the intensity and distribution of absorptions; Etude de la migration des neutrons dans un milieu multiplicateur en fonction de l'intensite et de la distribution des captures

    Energy Technology Data Exchange (ETDEWEB)

    Naudet, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The calculation of the neutron migration area assumes a simple form in two limiting cases: the case of pure slowing down and the case of purely thermal diffusion. In a thermal reactor, through these two schemes can be more or less applied at the start and finish of the life of the neutron, we must also consider a transition zone, in which the phenomena are obviously far more complex. How is the link to be made, and in what way does it depend on the distribution law of the captures? Two different methods have been developed to solve this problem. In the first one, the neutron is tracked through successive collisions, and attention is particularly concentrated on the variation of the absorption probability; in the second one, the spectrum is considered as a whole, the balance of neutrons arriving and disappearing at each velocity being written down. It is proved, moreover, that the two methods are based on the same formulation. The first one gives rise to interesting interpretations which permit a deep understanding of the physical phenomena; the second produces easier calculation, through the new thermalization operators developed at Saclay, The parameters of the problem are being studied successively (thermalization model, absorption law, variation law of the diffusion coefficient, geometrical parameters of the cell, relative importance of the leakages) For each of then, numerical applications are presented. (author) [French] Le calcul de l'aire de migration des neutrons se formule simplement dans deux cas limites: celui du ralentissement pur, et celui de la diffusion purement thermique. Dans un reacteur thermique, si on peut a la rigueur utiliser ces deux schemas au debut et a la fin de la vie des neutrons, il faut bien aussi considerer une zone de transition ou les phenomenes sont visiblement plus complexes. Comment effectuer le raccordement, et comment depend-il de la loi de repartition des captures? Deux methodes differentes ont ete etudiees pour resoudre

  10. Nutritional enrichment increases courtship intensity and improves mating success in male spiders

    DEFF Research Database (Denmark)

    Lomborg, Johannes Peter; Toft, Søren

    2009-01-01

    The development of male sexual ornaments and the intensity of male courtship behavior are often used by females as criteria for mate choice and by other males to evaluate the strength of a rival. We tested the hypotheses that courtship intensity and mating success depend on the males' nutritional...... status (enriched or deficient) and that courtship intensity predicts mating success in males of the same nutritional status. We used wolf spiders, Pardosa prativaga, which have an elaborate display of courtship behaviors, including encircling, palp vibrations, abdomen vibrations, hopping, etc. Viability...... indicated that diet effects on courtship intensity were indirect, through its effect on size. In competition tests between males of equal mass and the same diet treatment, the previously most active male (high levels of palp vibrating, abdomen vibrating, and hopping) had the highest mating success, though...

  11. Spectral intensity distribution of trapped fermions

    Indian Academy of Sciences (India)

    To calculate static response properties of a many-body system, local density approximation (LDA) can be safely applied. But, to obtain dynamical response functions, the applicability of LDA is limited bacause dynamics of the system needs to be considered as well. To examine this in the context of cold atoms, we consider a ...

  12. Spectral intensity distribution of trapped fermions

    Indian Academy of Sciences (India)

    To calculate static response properties of a many-body system, local density approxi- mation (LDA) can be safely applied. ... The spectral function is a very important quantity for a many-body system because it reveals many important aspects ... In momentum space representation they are given by. 〈k|n〉 = ψ(n, k) = d. ∏ i=1.

  13. Large amplitude free vibrations of tapered beams

    Science.gov (United States)

    Raju, L. S.; Raju, K. K.; Rao, G. V.

    1976-01-01

    The Galerkin method is used to investigate the large-amplitude free vibrations of simply supported and clamped tapered beams of rectangular cross-section which are frequently encountered in practical structures. Two types of linear tapers are considered: breadth and depth tapers. Two solutions are obtained for each type of taper, using trigonometric and polynomial displacement distributions. Frequency-amplitude relationships are obtained for all these cases for the fundamental flexural mode. The results indicate good agreement between trigonometric and polynomial solutions for all cases. The nonlinearity is noted to be always of the hardening type and, as expected, it is severe for beams with depth taper as compared with beams with breadth taper.

  14. Vibration characterization procedure of piezoelectric ceramic parameters

    Directory of Open Access Journals (Sweden)

    Meyer Yann

    2015-01-01

    Full Text Available To integrate new functionalities inside the mechanical structures for active vibration control, mechatronic, energy harvesting or fatigue management, it is necessary to developp a real fully distributed set of transducers and to include them at the heart of composite materials. To reach this goal, it is absolutely necessary to limit the cost of the numerous transducing elements with respect to the global system cost and, in the same time, to well-know the electromechanical behavior of theses transducers in order to well-design the system controller. In this paper, an experimental non-destructive procedure based on the analysis of anti-resonance and resonance frequencies of the transducers is proposed for determining the material coefficients of interest. This measurement process is applied to low-cost thin disks made of piezoceramics.

  15. Low-energy isovector quadrupole vibrations

    Energy Technology Data Exchange (ETDEWEB)

    Faessler, A.; Nojarov, R.

    1986-01-23

    The low-lying isovector quadrupole vibrations are described by an extension of the vibrational model allowing independent proton and neutron vibrations coupled by the symmetry energy. The recently detected low-lying isovector states in nearly spherical nuclei with N=84 are described well concerning their energies and E2/M1 mixing ratios. (orig.).

  16. Ground Vibration Measurements at LHC Point 4

    Energy Technology Data Exchange (ETDEWEB)

    Bertsche, Kirk; /SLAC; Gaddi, Andrea; /CERN

    2012-09-17

    Ground vibration was measured at Large Hadron Collider (LHC) Point 4 during the winter shutdown in February 2012. This report contains the results, including power and coherence spectra. We plan to collect and analyze vibration data from representative collider halls to inform specifications for future linear colliders, such as ILC and CLIC. We are especially interested in vibration correlations between final focus lens locations.

  17. Rotor Vibration Reduction via Active Hybrid Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2002-01-01

    The use of fluid power to reduce and control rotor vibration in rotating machines is investigated. An active hybrid bearing is studied, whose main objective is to reduce wear and vibration between rotating and stationary machinery parts. By injecting pressurised oil into the oil film, through...... with experiment, and simulations show the feasibility of controlling shaft vibration through this active device....

  18. 33 CFR 159.103 - Vibration test.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Vibration test. 159.103 Section...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.103 Vibration test. The device... subjected to a sinusoidal vibration for a period of 12 hours, 4 hours in each of the x, y, and z planes, at...

  19. 14 CFR 27.907 - Engine vibration.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine vibration. 27.907 Section 27.907... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant General § 27.907 Engine vibration. (a) Each engine must be installed to prevent the harmful vibration of any part of the engine or rotorcraft. (b) The addition of the...

  20. 14 CFR 29.251 - Vibration.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Vibration. 29.251 Section 29.251... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight Miscellaneous Flight Requirements § 29.251 Vibration. Each part of the rotorcraft must be free from excessive vibration under each appropriate speed and power...